--- ode-0.11.orig/missing
+++ ode-0.11/missing
@@ -1,10 +1,10 @@
 #! /bin/sh
 # Common stub for a few missing GNU programs while installing.
 
-scriptversion=2006-05-10.23
+scriptversion=2009-04-28.21; # UTC
 
-# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005, 2006
-#   Free Software Foundation, Inc.
+# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005, 2006,
+# 2008, 2009 Free Software Foundation, Inc.
 # Originally by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996.
 
 # This program is free software; you can redistribute it and/or modify
@@ -18,9 +18,7 @@
 # GNU General Public License for more details.
 
 # You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
-# 02110-1301, USA.
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 # As a special exception to the GNU General Public License, if you
 # distribute this file as part of a program that contains a
@@ -89,6 +87,9 @@
   tar          try tar, gnutar, gtar, then tar without non-portable flags
   yacc         create \`y.tab.[ch]', if possible, from existing .[ch]
 
+Version suffixes to PROGRAM as well as the prefixes \`gnu-', \`gnu', and
+\`g' are ignored when checking the name.
+
 Send bug reports to <bug-automake@gnu.org>."
     exit $?
     ;;
@@ -106,15 +107,22 @@
 
 esac
 
+# normalize program name to check for.
+program=`echo "$1" | sed '
+  s/^gnu-//; t
+  s/^gnu//; t
+  s/^g//; t'`
+
 # Now exit if we have it, but it failed.  Also exit now if we
 # don't have it and --version was passed (most likely to detect
-# the program).
+# the program).  This is about non-GNU programs, so use $1 not
+# $program.
 case $1 in
-  lex|yacc)
+  lex*|yacc*)
     # Not GNU programs, they don't have --version.
     ;;
 
-  tar)
+  tar*)
     if test -n "$run"; then
        echo 1>&2 "ERROR: \`tar' requires --run"
        exit 1
@@ -138,7 +146,7 @@
 
 # If it does not exist, or fails to run (possibly an outdated version),
 # try to emulate it.
-case $1 in
+case $program in
   aclocal*)
     echo 1>&2 "\
 WARNING: \`$1' is $msg.  You should only need it if
@@ -148,7 +156,7 @@
     touch aclocal.m4
     ;;
 
-  autoconf)
+  autoconf*)
     echo 1>&2 "\
 WARNING: \`$1' is $msg.  You should only need it if
          you modified \`${configure_ac}'.  You might want to install the
@@ -157,7 +165,7 @@
     touch configure
     ;;
 
-  autoheader)
+  autoheader*)
     echo 1>&2 "\
 WARNING: \`$1' is $msg.  You should only need it if
          you modified \`acconfig.h' or \`${configure_ac}'.  You might want
@@ -187,7 +195,7 @@
 	   while read f; do touch "$f"; done
     ;;
 
-  autom4te)
+  autom4te*)
     echo 1>&2 "\
 WARNING: \`$1' is needed, but is $msg.
          You might have modified some files without having the
@@ -210,7 +218,7 @@
     fi
     ;;
 
-  bison|yacc)
+  bison*|yacc*)
     echo 1>&2 "\
 WARNING: \`$1' $msg.  You should only need it if
          you modified a \`.y' file.  You may need the \`Bison' package
@@ -240,7 +248,7 @@
     fi
     ;;
 
-  lex|flex)
+  lex*|flex*)
     echo 1>&2 "\
 WARNING: \`$1' is $msg.  You should only need it if
          you modified a \`.l' file.  You may need the \`Flex' package
@@ -263,7 +271,7 @@
     fi
     ;;
 
-  help2man)
+  help2man*)
     echo 1>&2 "\
 WARNING: \`$1' is $msg.  You should only need it if
 	 you modified a dependency of a manual page.  You may need the
@@ -277,11 +285,11 @@
     else
 	test -z "$file" || exec >$file
 	echo ".ab help2man is required to generate this page"
-	exit 1
+	exit $?
     fi
     ;;
 
-  makeinfo)
+  makeinfo*)
     echo 1>&2 "\
 WARNING: \`$1' is $msg.  You should only need it if
          you modified a \`.texi' or \`.texinfo' file, or any other file
@@ -310,7 +318,7 @@
     touch $file
     ;;
 
-  tar)
+  tar*)
     shift
 
     # We have already tried tar in the generic part.
@@ -363,5 +371,6 @@
 # eval: (add-hook 'write-file-hooks 'time-stamp)
 # time-stamp-start: "scriptversion="
 # time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-end: "$"
+# time-stamp-time-zone: "UTC"
+# time-stamp-end: "; # UTC"
 # End:
--- ode-0.11.orig/install-sh
+++ ode-0.11/install-sh
@@ -1,7 +1,7 @@
 #!/bin/sh
 # install - install a program, script, or datafile
 
-scriptversion=2006-12-25.00
+scriptversion=2009-04-28.21; # UTC
 
 # This originates from X11R5 (mit/util/scripts/install.sh), which was
 # later released in X11R6 (xc/config/util/install.sh) with the
@@ -515,5 +515,6 @@
 # eval: (add-hook 'write-file-hooks 'time-stamp)
 # time-stamp-start: "scriptversion="
 # time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-end: "$"
+# time-stamp-time-zone: "UTC"
+# time-stamp-end: "; # UTC"
 # End:
--- ode-0.11.orig/configure
+++ ode-0.11/configure
@@ -1,20 +1,22 @@
 #! /bin/sh
 # Guess values for system-dependent variables and create Makefiles.
-# Generated by GNU Autoconf 2.63 for ODE 0.11.
+# Generated by GNU Autoconf 2.64 for ODE 0.11.
 #
 # Report bugs to <ode@ode.org>.
 #
 # Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
-# 2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
+# 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software
+# Foundation, Inc.
+#
 # This configure script is free software; the Free Software Foundation
 # gives unlimited permission to copy, distribute and modify it.
-## --------------------- ##
-## M4sh Initialization.  ##
-## --------------------- ##
+## -------------------- ##
+## M4sh Initialization. ##
+## -------------------- ##
 
 # Be more Bourne compatible
 DUALCASE=1; export DUALCASE # for MKS sh
-if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then :
   emulate sh
   NULLCMD=:
   # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
@@ -22,23 +24,15 @@
   alias -g '${1+"$@"}'='"$@"'
   setopt NO_GLOB_SUBST
 else
-  case `(set -o) 2>/dev/null` in
-  *posix*) set -o posix ;;
+  case `(set -o) 2>/dev/null` in #(
+  *posix*) :
+    set -o posix ;; #(
+  *) :
+     ;;
 esac
-
 fi
 
 
-
-
-# PATH needs CR
-# Avoid depending upon Character Ranges.
-as_cr_letters='abcdefghijklmnopqrstuvwxyz'
-as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
-as_cr_Letters=$as_cr_letters$as_cr_LETTERS
-as_cr_digits='0123456789'
-as_cr_alnum=$as_cr_Letters$as_cr_digits
-
 as_nl='
 '
 export as_nl
@@ -46,7 +40,13 @@
 as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
 as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
 as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
-if (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
+# Prefer a ksh shell builtin over an external printf program on Solaris,
+# but without wasting forks for bash or zsh.
+if test -z "$BASH_VERSION$ZSH_VERSION" \
+    && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then
+  as_echo='print -r --'
+  as_echo_n='print -rn --'
+elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
   as_echo='printf %s\n'
   as_echo_n='printf %s'
 else
@@ -57,7 +57,7 @@
     as_echo_body='eval expr "X$1" : "X\\(.*\\)"'
     as_echo_n_body='eval
       arg=$1;
-      case $arg in
+      case $arg in #(
       *"$as_nl"*)
 	expr "X$arg" : "X\\(.*\\)$as_nl";
 	arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
@@ -80,13 +80,6 @@
   }
 fi
 
-# Support unset when possible.
-if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
-  as_unset=unset
-else
-  as_unset=false
-fi
-
 
 # IFS
 # We need space, tab and new line, in precisely that order.  Quoting is
@@ -96,15 +89,15 @@
 IFS=" ""	$as_nl"
 
 # Find who we are.  Look in the path if we contain no directory separator.
-case $0 in
+case $0 in #((
   *[\\/]* ) as_myself=$0 ;;
   *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
 for as_dir in $PATH
 do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
-  test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
-done
+    test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
+  done
 IFS=$as_save_IFS
 
      ;;
@@ -116,12 +109,16 @@
 fi
 if test ! -f "$as_myself"; then
   $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
-  { (exit 1); exit 1; }
+  exit 1
 fi
 
-# Work around bugs in pre-3.0 UWIN ksh.
-for as_var in ENV MAIL MAILPATH
-do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
+# Unset variables that we do not need and which cause bugs (e.g. in
+# pre-3.0 UWIN ksh).  But do not cause bugs in bash 2.01; the "|| exit 1"
+# suppresses any "Segmentation fault" message there.  '((' could
+# trigger a bug in pdksh 5.2.14.
+for as_var in BASH_ENV ENV MAIL MAILPATH
+do eval test x\${$as_var+set} = xset \
+  && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || :
 done
 PS1='$ '
 PS2='> '
@@ -133,330 +130,299 @@
 LANGUAGE=C
 export LANGUAGE
 
-# Required to use basename.
-if expr a : '\(a\)' >/dev/null 2>&1 &&
-   test "X`expr 00001 : '.*\(...\)'`" = X001; then
-  as_expr=expr
-else
-  as_expr=false
-fi
-
-if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
-  as_basename=basename
-else
-  as_basename=false
-fi
-
-
-# Name of the executable.
-as_me=`$as_basename -- "$0" ||
-$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
-	 X"$0" : 'X\(//\)$' \| \
-	 X"$0" : 'X\(/\)' \| . 2>/dev/null ||
-$as_echo X/"$0" |
-    sed '/^.*\/\([^/][^/]*\)\/*$/{
-	    s//\1/
-	    q
-	  }
-	  /^X\/\(\/\/\)$/{
-	    s//\1/
-	    q
-	  }
-	  /^X\/\(\/\).*/{
-	    s//\1/
-	    q
-	  }
-	  s/.*/./; q'`
-
 # CDPATH.
-$as_unset CDPATH
-
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
 
 if test "x$CONFIG_SHELL" = x; then
-  if (eval ":") 2>/dev/null; then
-  as_have_required=yes
+  as_bourne_compatible="if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then :
+  emulate sh
+  NULLCMD=:
+  # Pre-4.2 versions of Zsh do word splitting on \${1+\"\$@\"}, which
+  # is contrary to our usage.  Disable this feature.
+  alias -g '\${1+\"\$@\"}'='\"\$@\"'
+  setopt NO_GLOB_SUBST
 else
-  as_have_required=no
+  case \`(set -o) 2>/dev/null\` in #(
+  *posix*) :
+    set -o posix ;; #(
+  *) :
+     ;;
+esac
 fi
-
-  if test $as_have_required = yes &&	 (eval ":
-(as_func_return () {
-  (exit \$1)
-}
-as_func_success () {
-  as_func_return 0
-}
-as_func_failure () {
-  as_func_return 1
-}
-as_func_ret_success () {
-  return 0
-}
-as_func_ret_failure () {
-  return 1
-}
+"
+  as_required="as_fn_return () { (exit \$1); }
+as_fn_success () { as_fn_return 0; }
+as_fn_failure () { as_fn_return 1; }
+as_fn_ret_success () { return 0; }
+as_fn_ret_failure () { return 1; }
 
 exitcode=0
-if as_func_success; then
-  :
-else
-  exitcode=1
-  echo as_func_success failed.
-fi
-
-if as_func_failure; then
-  exitcode=1
-  echo as_func_failure succeeded.
-fi
-
-if as_func_ret_success; then
-  :
-else
-  exitcode=1
-  echo as_func_ret_success failed.
-fi
-
-if as_func_ret_failure; then
-  exitcode=1
-  echo as_func_ret_failure succeeded.
-fi
-
-if ( set x; as_func_ret_success y && test x = \"\$1\" ); then
-  :
+as_fn_success || { exitcode=1; echo as_fn_success failed.; }
+as_fn_failure && { exitcode=1; echo as_fn_failure succeeded.; }
+as_fn_ret_success || { exitcode=1; echo as_fn_ret_success failed.; }
+as_fn_ret_failure && { exitcode=1; echo as_fn_ret_failure succeeded.; }
+if ( set x; as_fn_ret_success y && test x = \"\$1\" ); then :
+
+else
+  exitcode=1; echo positional parameters were not saved.
+fi
+test x\$exitcode = x0 || exit 1"
+  as_suggested="  as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_1a=\$LINENO
+  as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO
+  eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" &&
+  test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1
+test \$(( 1 + 1 )) = 2 || exit 1"
+  if (eval "$as_required") 2>/dev/null; then :
+  as_have_required=yes
 else
-  exitcode=1
-  echo positional parameters were not saved.
+  as_have_required=no
 fi
+  if test x$as_have_required = xyes && (eval "$as_suggested") 2>/dev/null; then :
 
-test \$exitcode = 0) || { (exit 1); exit 1; }
-
-(
-  as_lineno_1=\$LINENO
-  as_lineno_2=\$LINENO
-  test \"x\$as_lineno_1\" != \"x\$as_lineno_2\" &&
-  test \"x\`expr \$as_lineno_1 + 1\`\" = \"x\$as_lineno_2\") || { (exit 1); exit 1; }
-") 2> /dev/null; then
-  :
 else
-  as_candidate_shells=
-    as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+as_found=false
 for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
 do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
-  case $as_dir in
+  as_found=:
+  case $as_dir in #(
 	 /*)
 	   for as_base in sh bash ksh sh5; do
-	     as_candidate_shells="$as_candidate_shells $as_dir/$as_base"
+	     # Try only shells that exist, to save several forks.
+	     as_shell=$as_dir/$as_base
+	     if { test -f "$as_shell" || test -f "$as_shell.exe"; } &&
+		    { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$as_shell"; } 2>/dev/null; then :
+  CONFIG_SHELL=$as_shell as_have_required=yes
+		   if { $as_echo "$as_bourne_compatible""$as_suggested" | as_run=a "$as_shell"; } 2>/dev/null; then :
+  break 2
+fi
+fi
 	   done;;
        esac
+  as_found=false
 done
+$as_found || { if { test -f "$SHELL" || test -f "$SHELL.exe"; } &&
+	      { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$SHELL"; } 2>/dev/null; then :
+  CONFIG_SHELL=$SHELL as_have_required=yes
+fi; }
 IFS=$as_save_IFS
 
 
-      for as_shell in $as_candidate_shells $SHELL; do
-	 # Try only shells that exist, to save several forks.
-	 if { test -f "$as_shell" || test -f "$as_shell.exe"; } &&
-		{ ("$as_shell") 2> /dev/null <<\_ASEOF
-if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
-  emulate sh
-  NULLCMD=:
-  # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
-  # is contrary to our usage.  Disable this feature.
-  alias -g '${1+"$@"}'='"$@"'
-  setopt NO_GLOB_SUBST
-else
-  case `(set -o) 2>/dev/null` in
-  *posix*) set -o posix ;;
-esac
-
-fi
-
-
-:
-_ASEOF
-}; then
-  CONFIG_SHELL=$as_shell
-	       as_have_required=yes
-	       if { "$as_shell" 2> /dev/null <<\_ASEOF
-if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
-  emulate sh
-  NULLCMD=:
-  # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
-  # is contrary to our usage.  Disable this feature.
-  alias -g '${1+"$@"}'='"$@"'
-  setopt NO_GLOB_SUBST
-else
-  case `(set -o) 2>/dev/null` in
-  *posix*) set -o posix ;;
-esac
-
-fi
-
-
-:
-(as_func_return () {
-  (exit $1)
-}
-as_func_success () {
-  as_func_return 0
-}
-as_func_failure () {
-  as_func_return 1
-}
-as_func_ret_success () {
-  return 0
-}
-as_func_ret_failure () {
-  return 1
-}
-
-exitcode=0
-if as_func_success; then
-  :
-else
-  exitcode=1
-  echo as_func_success failed.
-fi
-
-if as_func_failure; then
-  exitcode=1
-  echo as_func_failure succeeded.
-fi
-
-if as_func_ret_success; then
-  :
-else
-  exitcode=1
-  echo as_func_ret_success failed.
-fi
-
-if as_func_ret_failure; then
-  exitcode=1
-  echo as_func_ret_failure succeeded.
-fi
-
-if ( set x; as_func_ret_success y && test x = "$1" ); then
-  :
-else
-  exitcode=1
-  echo positional parameters were not saved.
-fi
-
-test $exitcode = 0) || { (exit 1); exit 1; }
-
-(
-  as_lineno_1=$LINENO
-  as_lineno_2=$LINENO
-  test "x$as_lineno_1" != "x$as_lineno_2" &&
-  test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2") || { (exit 1); exit 1; }
-
-_ASEOF
-}; then
-  break
-fi
-
-fi
-
-      done
-
-      if test "x$CONFIG_SHELL" != x; then
-  for as_var in BASH_ENV ENV
-	do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
-	done
+      if test "x$CONFIG_SHELL" != x; then :
+  # We cannot yet assume a decent shell, so we have to provide a
+	# neutralization value for shells without unset; and this also
+	# works around shells that cannot unset nonexistent variables.
+	BASH_ENV=/dev/null
+	ENV=/dev/null
+	(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV
 	export CONFIG_SHELL
 	exec "$CONFIG_SHELL" "$as_myself" ${1+"$@"}
 fi
 
-
-    if test $as_have_required = no; then
-  echo This script requires a shell more modern than all the
-      echo shells that I found on your system.  Please install a
-      echo modern shell, or manually run the script under such a
-      echo shell if you do have one.
-      { (exit 1); exit 1; }
+    if test x$as_have_required = xno; then :
+  $as_echo "$0: This script requires a shell more modern than all"
+  $as_echo "$0: the shells that I found on your system."
+  if test x${ZSH_VERSION+set} = xset ; then
+    $as_echo "$0: In particular, zsh $ZSH_VERSION has bugs and should"
+    $as_echo "$0: be upgraded to zsh 4.3.4 or later."
+  else
+    $as_echo "$0: Please tell bug-autoconf@gnu.org and ode@ode.org about
+$0: your system, including any error possibly output before
+$0: this message. Then install a modern shell, or manually
+$0: run the script under such a shell if you do have one."
+  fi
+  exit 1
 fi
-
-
 fi
-
 fi
+SHELL=${CONFIG_SHELL-/bin/sh}
+export SHELL
+# Unset more variables known to interfere with behavior of common tools.
+CLICOLOR_FORCE= GREP_OPTIONS=
+unset CLICOLOR_FORCE GREP_OPTIONS
+
+## --------------------- ##
+## M4sh Shell Functions. ##
+## --------------------- ##
+# as_fn_unset VAR
+# ---------------
+# Portably unset VAR.
+as_fn_unset ()
+{
+  { eval $1=; unset $1;}
+}
+as_unset=as_fn_unset
+
+# as_fn_set_status STATUS
+# -----------------------
+# Set $? to STATUS, without forking.
+as_fn_set_status ()
+{
+  return $1
+} # as_fn_set_status
+
+# as_fn_exit STATUS
+# -----------------
+# Exit the shell with STATUS, even in a "trap 0" or "set -e" context.
+as_fn_exit ()
+{
+  set +e
+  as_fn_set_status $1
+  exit $1
+} # as_fn_exit
+
+# as_fn_mkdir_p
+# -------------
+# Create "$as_dir" as a directory, including parents if necessary.
+as_fn_mkdir_p ()
+{
 
+  case $as_dir in #(
+  -*) as_dir=./$as_dir;;
+  esac
+  test -d "$as_dir" || eval $as_mkdir_p || {
+    as_dirs=
+    while :; do
+      case $as_dir in #(
+      *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
+      *) as_qdir=$as_dir;;
+      esac
+      as_dirs="'$as_qdir' $as_dirs"
+      as_dir=`$as_dirname -- "$as_dir" ||
+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$as_dir" : 'X\(//\)[^/]' \| \
+	 X"$as_dir" : 'X\(//\)$' \| \
+	 X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$as_dir" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+      test -d "$as_dir" && break
+    done
+    test -z "$as_dirs" || eval "mkdir $as_dirs"
+  } || test -d "$as_dir" || as_fn_error "cannot create directory $as_dir"
 
 
-(eval "as_func_return () {
-  (exit \$1)
-}
-as_func_success () {
-  as_func_return 0
-}
-as_func_failure () {
-  as_func_return 1
-}
-as_func_ret_success () {
-  return 0
-}
-as_func_ret_failure () {
-  return 1
-}
+} # as_fn_mkdir_p
+# as_fn_append VAR VALUE
+# ----------------------
+# Append the text in VALUE to the end of the definition contained in VAR. Take
+# advantage of any shell optimizations that allow amortized linear growth over
+# repeated appends, instead of the typical quadratic growth present in naive
+# implementations.
+if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then :
+  eval 'as_fn_append ()
+  {
+    eval $1+=\$2
+  }'
+else
+  as_fn_append ()
+  {
+    eval $1=\$$1\$2
+  }
+fi # as_fn_append
 
-exitcode=0
-if as_func_success; then
-  :
+# as_fn_arith ARG...
+# ------------------
+# Perform arithmetic evaluation on the ARGs, and store the result in the
+# global $as_val. Take advantage of shells that can avoid forks. The arguments
+# must be portable across $(()) and expr.
+if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then :
+  eval 'as_fn_arith ()
+  {
+    as_val=$(( $* ))
+  }'
 else
-  exitcode=1
-  echo as_func_success failed.
-fi
+  as_fn_arith ()
+  {
+    as_val=`expr "$@" || test $? -eq 1`
+  }
+fi # as_fn_arith
 
-if as_func_failure; then
-  exitcode=1
-  echo as_func_failure succeeded.
-fi
 
-if as_func_ret_success; then
-  :
+# as_fn_error ERROR [LINENO LOG_FD]
+# ---------------------------------
+# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
+# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
+# script with status $?, using 1 if that was 0.
+as_fn_error ()
+{
+  as_status=$?; test $as_status -eq 0 && as_status=1
+  if test "$3"; then
+    as_lineno=${as_lineno-"$2"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+    $as_echo "$as_me:${as_lineno-$LINENO}: error: $1" >&$3
+  fi
+  $as_echo "$as_me: error: $1" >&2
+  as_fn_exit $as_status
+} # as_fn_error
+
+if expr a : '\(a\)' >/dev/null 2>&1 &&
+   test "X`expr 00001 : '.*\(...\)'`" = X001; then
+  as_expr=expr
 else
-  exitcode=1
-  echo as_func_ret_success failed.
+  as_expr=false
 fi
 
-if as_func_ret_failure; then
-  exitcode=1
-  echo as_func_ret_failure succeeded.
+if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
+  as_basename=basename
+else
+  as_basename=false
 fi
 
-if ( set x; as_func_ret_success y && test x = \"\$1\" ); then
-  :
+if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
+  as_dirname=dirname
 else
-  exitcode=1
-  echo positional parameters were not saved.
+  as_dirname=false
 fi
 
-test \$exitcode = 0") || {
-  echo No shell found that supports shell functions.
-  echo Please tell bug-autoconf@gnu.org about your system,
-  echo including any error possibly output before this message.
-  echo This can help us improve future autoconf versions.
-  echo Configuration will now proceed without shell functions.
-}
+as_me=`$as_basename -- "$0" ||
+$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
+	 X"$0" : 'X\(//\)$' \| \
+	 X"$0" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X/"$0" |
+    sed '/^.*\/\([^/][^/]*\)\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\/\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\/\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
 
+# Avoid depending upon Character Ranges.
+as_cr_letters='abcdefghijklmnopqrstuvwxyz'
+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
+as_cr_Letters=$as_cr_letters$as_cr_LETTERS
+as_cr_digits='0123456789'
+as_cr_alnum=$as_cr_Letters$as_cr_digits
 
 
-  as_lineno_1=$LINENO
-  as_lineno_2=$LINENO
-  test "x$as_lineno_1" != "x$as_lineno_2" &&
-  test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || {
-
-  # Create $as_me.lineno as a copy of $as_myself, but with $LINENO
-  # uniformly replaced by the line number.  The first 'sed' inserts a
-  # line-number line after each line using $LINENO; the second 'sed'
-  # does the real work.  The second script uses 'N' to pair each
-  # line-number line with the line containing $LINENO, and appends
-  # trailing '-' during substitution so that $LINENO is not a special
-  # case at line end.
-  # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
-  # scripts with optimization help from Paolo Bonzini.  Blame Lee
-  # E. McMahon (1931-1989) for sed's syntax.  :-)
+  as_lineno_1=$LINENO as_lineno_1a=$LINENO
+  as_lineno_2=$LINENO as_lineno_2a=$LINENO
+  eval 'test "x$as_lineno_1'$as_run'" != "x$as_lineno_2'$as_run'" &&
+  test "x`expr $as_lineno_1'$as_run' + 1`" = "x$as_lineno_2'$as_run'"' || {
+  # Blame Lee E. McMahon (1931-1989) for sed's syntax.  :-)
   sed -n '
     p
     /[$]LINENO/=
@@ -473,8 +439,7 @@
       s/-\n.*//
     ' >$as_me.lineno &&
   chmod +x "$as_me.lineno" ||
-    { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2
-   { (exit 1); exit 1; }; }
+    { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2; as_fn_exit 1; }
 
   # Don't try to exec as it changes $[0], causing all sort of problems
   # (the dirname of $[0] is not the place where we might find the
@@ -484,29 +449,18 @@
   exit
 }
 
-
-if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
-  as_dirname=dirname
-else
-  as_dirname=false
-fi
-
 ECHO_C= ECHO_N= ECHO_T=
-case `echo -n x` in
+case `echo -n x` in #(((((
 -n*)
-  case `echo 'x\c'` in
+  case `echo 'xy\c'` in
   *c*) ECHO_T='	';;	# ECHO_T is single tab character.
-  *)   ECHO_C='\c';;
+  xy)  ECHO_C='\c';;
+  *)   echo `echo ksh88 bug on AIX 6.1` > /dev/null
+       ECHO_T='	';;
   esac;;
 *)
   ECHO_N='-n';;
 esac
-if expr a : '\(a\)' >/dev/null 2>&1 &&
-   test "X`expr 00001 : '.*\(...\)'`" = X001; then
-  as_expr=expr
-else
-  as_expr=false
-fi
 
 rm -f conf$$ conf$$.exe conf$$.file
 if test -d conf$$.dir; then
@@ -536,7 +490,7 @@
 rmdir conf$$.dir 2>/dev/null
 
 if mkdir -p . 2>/dev/null; then
-  as_mkdir_p=:
+  as_mkdir_p='mkdir -p "$as_dir"'
 else
   test -d ./-p && rmdir ./-p
   as_mkdir_p=false
@@ -555,10 +509,10 @@
       if test -d "$1"; then
 	test -d "$1/.";
       else
-	case $1 in
+	case $1 in #(
 	-*)set "./$1";;
 	esac;
-	case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in
+	case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in #((
 	???[sx]*):;;*)false;;esac;fi
     '\'' sh
   '
@@ -573,26 +527,25 @@
 
 
 
-
 # Check that we are running under the correct shell.
 SHELL=${CONFIG_SHELL-/bin/sh}
 
-case X$ECHO in
+case X$lt_ECHO in
 X*--fallback-echo)
   # Remove one level of quotation (which was required for Make).
-  ECHO=`echo "$ECHO" | sed 's,\\\\\$\\$0,'$0','`
+  ECHO=`echo "$lt_ECHO" | sed 's,\\\\\$\\$0,'$0','`
   ;;
 esac
 
-echo=${ECHO-echo}
+ECHO=${lt_ECHO-echo}
 if test "X$1" = X--no-reexec; then
   # Discard the --no-reexec flag, and continue.
   shift
 elif test "X$1" = X--fallback-echo; then
   # Avoid inline document here, it may be left over
   :
-elif test "X`($echo '\t') 2>/dev/null`" = 'X\t' ; then
-  # Yippee, $echo works!
+elif test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' ; then
+  # Yippee, $ECHO works!
   :
 else
   # Restart under the correct shell.
@@ -602,9 +555,9 @@
 if test "X$1" = X--fallback-echo; then
   # used as fallback echo
   shift
-  cat <<EOF
+  cat <<_LT_EOF
 $*
-EOF
+_LT_EOF
   exit 0
 fi
 
@@ -612,121 +565,116 @@
 # if CDPATH is set.
 (unset CDPATH) >/dev/null 2>&1 && unset CDPATH
 
-if test -z "$ECHO"; then
-if test "X${echo_test_string+set}" != Xset; then
-# find a string as large as possible, as long as the shell can cope with it
-  for cmd in 'sed 50q "$0"' 'sed 20q "$0"' 'sed 10q "$0"' 'sed 2q "$0"' 'echo test'; do
-    # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ...
-    if (echo_test_string=`eval $cmd`) 2>/dev/null &&
-       echo_test_string=`eval $cmd` &&
-       (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null
-    then
-      break
-    fi
-  done
-fi
+if test -z "$lt_ECHO"; then
+  if test "X${echo_test_string+set}" != Xset; then
+    # find a string as large as possible, as long as the shell can cope with it
+    for cmd in 'sed 50q "$0"' 'sed 20q "$0"' 'sed 10q "$0"' 'sed 2q "$0"' 'echo test'; do
+      # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ...
+      if { echo_test_string=`eval $cmd`; } 2>/dev/null &&
+	 { test "X$echo_test_string" = "X$echo_test_string"; } 2>/dev/null
+      then
+        break
+      fi
+    done
+  fi
 
-if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
-   echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
-   test "X$echo_testing_string" = "X$echo_test_string"; then
-  :
-else
-  # The Solaris, AIX, and Digital Unix default echo programs unquote
-  # backslashes.  This makes it impossible to quote backslashes using
-  #   echo "$something" | sed 's/\\/\\\\/g'
-  #
-  # So, first we look for a working echo in the user's PATH.
+  if test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' &&
+     echo_testing_string=`{ $ECHO "$echo_test_string"; } 2>/dev/null` &&
+     test "X$echo_testing_string" = "X$echo_test_string"; then
+    :
+  else
+    # The Solaris, AIX, and Digital Unix default echo programs unquote
+    # backslashes.  This makes it impossible to quote backslashes using
+    #   echo "$something" | sed 's/\\/\\\\/g'
+    #
+    # So, first we look for a working echo in the user's PATH.
 
-  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-  for dir in $PATH /usr/ucb; do
+    lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+    for dir in $PATH /usr/ucb; do
+      IFS="$lt_save_ifs"
+      if (test -f $dir/echo || test -f $dir/echo$ac_exeext) &&
+         test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' &&
+         echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` &&
+         test "X$echo_testing_string" = "X$echo_test_string"; then
+        ECHO="$dir/echo"
+        break
+      fi
+    done
     IFS="$lt_save_ifs"
-    if (test -f $dir/echo || test -f $dir/echo$ac_exeext) &&
-       test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' &&
-       echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` &&
-       test "X$echo_testing_string" = "X$echo_test_string"; then
-      echo="$dir/echo"
-      break
-    fi
-  done
-  IFS="$lt_save_ifs"
 
-  if test "X$echo" = Xecho; then
-    # We didn't find a better echo, so look for alternatives.
-    if test "X`(print -r '\t') 2>/dev/null`" = 'X\t' &&
-       echo_testing_string=`(print -r "$echo_test_string") 2>/dev/null` &&
-       test "X$echo_testing_string" = "X$echo_test_string"; then
-      # This shell has a builtin print -r that does the trick.
-      echo='print -r'
-    elif (test -f /bin/ksh || test -f /bin/ksh$ac_exeext) &&
-	 test "X$CONFIG_SHELL" != X/bin/ksh; then
-      # If we have ksh, try running configure again with it.
-      ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh}
-      export ORIGINAL_CONFIG_SHELL
-      CONFIG_SHELL=/bin/ksh
-      export CONFIG_SHELL
-      exec $CONFIG_SHELL "$0" --no-reexec ${1+"$@"}
-    else
-      # Try using printf.
-      echo='printf %s\n'
-      if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
-	 echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
-	 test "X$echo_testing_string" = "X$echo_test_string"; then
-	# Cool, printf works
-	:
-      elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` &&
-	   test "X$echo_testing_string" = 'X\t' &&
-	   echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
-	   test "X$echo_testing_string" = "X$echo_test_string"; then
-	CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL
-	export CONFIG_SHELL
-	SHELL="$CONFIG_SHELL"
-	export SHELL
-	echo="$CONFIG_SHELL $0 --fallback-echo"
-      elif echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` &&
-	   test "X$echo_testing_string" = 'X\t' &&
-	   echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
+    if test "X$ECHO" = Xecho; then
+      # We didn't find a better echo, so look for alternatives.
+      if test "X`{ print -r '\t'; } 2>/dev/null`" = 'X\t' &&
+         echo_testing_string=`{ print -r "$echo_test_string"; } 2>/dev/null` &&
+         test "X$echo_testing_string" = "X$echo_test_string"; then
+        # This shell has a builtin print -r that does the trick.
+        ECHO='print -r'
+      elif { test -f /bin/ksh || test -f /bin/ksh$ac_exeext; } &&
+	   test "X$CONFIG_SHELL" != X/bin/ksh; then
+        # If we have ksh, try running configure again with it.
+        ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh}
+        export ORIGINAL_CONFIG_SHELL
+        CONFIG_SHELL=/bin/ksh
+        export CONFIG_SHELL
+        exec $CONFIG_SHELL "$0" --no-reexec ${1+"$@"}
+      else
+        # Try using printf.
+        ECHO='printf %s\n'
+        if test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' &&
+	   echo_testing_string=`{ $ECHO "$echo_test_string"; } 2>/dev/null` &&
 	   test "X$echo_testing_string" = "X$echo_test_string"; then
-	echo="$CONFIG_SHELL $0 --fallback-echo"
-      else
-	# maybe with a smaller string...
-	prev=:
+	  # Cool, printf works
+	  :
+        elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` &&
+	     test "X$echo_testing_string" = 'X\t' &&
+	     echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
+	     test "X$echo_testing_string" = "X$echo_test_string"; then
+	  CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL
+	  export CONFIG_SHELL
+	  SHELL="$CONFIG_SHELL"
+	  export SHELL
+	  ECHO="$CONFIG_SHELL $0 --fallback-echo"
+        elif echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` &&
+	     test "X$echo_testing_string" = 'X\t' &&
+	     echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
+	     test "X$echo_testing_string" = "X$echo_test_string"; then
+	  ECHO="$CONFIG_SHELL $0 --fallback-echo"
+        else
+	  # maybe with a smaller string...
+	  prev=:
 
-	for cmd in 'echo test' 'sed 2q "$0"' 'sed 10q "$0"' 'sed 20q "$0"' 'sed 50q "$0"'; do
-	  if (test "X$echo_test_string" = "X`eval $cmd`") 2>/dev/null
-	  then
-	    break
-	  fi
-	  prev="$cmd"
-	done
+	  for cmd in 'echo test' 'sed 2q "$0"' 'sed 10q "$0"' 'sed 20q "$0"' 'sed 50q "$0"'; do
+	    if { test "X$echo_test_string" = "X`eval $cmd`"; } 2>/dev/null
+	    then
+	      break
+	    fi
+	    prev="$cmd"
+	  done
 
-	if test "$prev" != 'sed 50q "$0"'; then
-	  echo_test_string=`eval $prev`
-	  export echo_test_string
-	  exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "$0" ${1+"$@"}
-	else
-	  # Oops.  We lost completely, so just stick with echo.
-	  echo=echo
-	fi
+	  if test "$prev" != 'sed 50q "$0"'; then
+	    echo_test_string=`eval $prev`
+	    export echo_test_string
+	    exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "$0" ${1+"$@"}
+	  else
+	    # Oops.  We lost completely, so just stick with echo.
+	    ECHO=echo
+	  fi
+        fi
       fi
     fi
   fi
 fi
-fi
 
 # Copy echo and quote the copy suitably for passing to libtool from
 # the Makefile, instead of quoting the original, which is used later.
-ECHO=$echo
-if test "X$ECHO" = "X$CONFIG_SHELL $0 --fallback-echo"; then
-   ECHO="$CONFIG_SHELL \\\$\$0 --fallback-echo"
+lt_ECHO=$ECHO
+if test "X$lt_ECHO" = "X$CONFIG_SHELL $0 --fallback-echo"; then
+   lt_ECHO="$CONFIG_SHELL \\\$\$0 --fallback-echo"
 fi
 
 
 
 
-tagnames=${tagnames+${tagnames},}CXX
-
-tagnames=${tagnames+${tagnames},}F77
-
 exec 7<&0 </dev/null 6>&1
 
 # Name of the host.
@@ -745,7 +693,6 @@
 subdirs=
 MFLAGS=
 MAKEFLAGS=
-SHELL=${CONFIG_SHELL-/bin/sh}
 
 # Identity of this package.
 PACKAGE_NAME='ODE'
@@ -753,6 +700,7 @@
 PACKAGE_VERSION='0.11'
 PACKAGE_STRING='ODE 0.11'
 PACKAGE_BUGREPORT='ode@ode.org'
+PACKAGE_URL=''
 
 # Factoring default headers for most tests.
 ac_includes_default="\
@@ -791,7 +739,9 @@
 #endif"
 
 enable_option_checking=no
-ac_subst_vars='LTLIBOBJS
+ac_subst_vars='am__EXEEXT_FALSE
+am__EXEEXT_TRUE
+LTLIBOBJS
 ENABLE_OU_FALSE
 ENABLE_OU_TRUE
 subdirs
@@ -826,22 +776,27 @@
 X86_64_SYSTEM_TRUE
 ac_ct_WINDRES
 WINDRES
-LIBTOOL
-ac_ct_F77
-FFLAGS
-F77
 CXXCPP
-OBJDUMP
-AS
-DLLTOOL
+OTOOL64
+OTOOL
+LIPO
 NMEDIT
 DSYMUTIL
+lt_ECHO
 RANLIB
 AR
-ECHO
+NM
+ac_ct_DUMPBIN
+DUMPBIN
+LD
+FGREP
 EGREP
 GREP
 SED
+LIBTOOL
+OBJDUMP
+DLLTOOL
+AS
 LN_S
 CPP
 am__fastdepCC_FALSE
@@ -929,6 +884,7 @@
 program_transform_name
 prefix
 exec_prefix
+PACKAGE_URL
 PACKAGE_BUGREPORT
 PACKAGE_STRING
 PACKAGE_VERSION
@@ -943,11 +899,10 @@
 enable_dependency_tracking
 enable_shared
 enable_static
+with_pic
 enable_fast_install
 with_gnu_ld
 enable_libtool_lock
-with_pic
-with_tags
 enable_demos
 with_trimesh
 enable_double_precision
@@ -972,8 +927,6 @@
 CFLAGS
 CPP
 CXXCPP
-F77
-FFLAGS
 XMKMF'
 ac_subdirs_all='ou'
 
@@ -1083,8 +1036,7 @@
     ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
     # Reject names that are not valid shell variable names.
     expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
-      { $as_echo "$as_me: error: invalid feature name: $ac_useropt" >&2
-   { (exit 1); exit 1; }; }
+      as_fn_error "invalid feature name: $ac_useropt"
     ac_useropt_orig=$ac_useropt
     ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
     case $ac_user_opts in
@@ -1110,8 +1062,7 @@
     ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
     # Reject names that are not valid shell variable names.
     expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
-      { $as_echo "$as_me: error: invalid feature name: $ac_useropt" >&2
-   { (exit 1); exit 1; }; }
+      as_fn_error "invalid feature name: $ac_useropt"
     ac_useropt_orig=$ac_useropt
     ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
     case $ac_user_opts in
@@ -1315,8 +1266,7 @@
     ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
     # Reject names that are not valid shell variable names.
     expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
-      { $as_echo "$as_me: error: invalid package name: $ac_useropt" >&2
-   { (exit 1); exit 1; }; }
+      as_fn_error "invalid package name: $ac_useropt"
     ac_useropt_orig=$ac_useropt
     ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
     case $ac_user_opts in
@@ -1332,8 +1282,7 @@
     ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'`
     # Reject names that are not valid shell variable names.
     expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
-      { $as_echo "$as_me: error: invalid package name: $ac_useropt" >&2
-   { (exit 1); exit 1; }; }
+      as_fn_error "invalid package name: $ac_useropt"
     ac_useropt_orig=$ac_useropt
     ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
     case $ac_user_opts in
@@ -1363,17 +1312,17 @@
   | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
     x_libraries=$ac_optarg ;;
 
-  -*) { $as_echo "$as_me: error: unrecognized option: $ac_option
-Try \`$0 --help' for more information." >&2
-   { (exit 1); exit 1; }; }
+  -*) as_fn_error "unrecognized option: \`$ac_option'
+Try \`$0 --help' for more information."
     ;;
 
   *=*)
     ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='`
     # Reject names that are not valid shell variable names.
-    expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null &&
-      { $as_echo "$as_me: error: invalid variable name: $ac_envvar" >&2
-   { (exit 1); exit 1; }; }
+    case $ac_envvar in #(
+      '' | [0-9]* | *[!_$as_cr_alnum]* )
+      as_fn_error "invalid variable name: \`$ac_envvar'" ;;
+    esac
     eval $ac_envvar=\$ac_optarg
     export $ac_envvar ;;
 
@@ -1390,15 +1339,13 @@
 
 if test -n "$ac_prev"; then
   ac_option=--`echo $ac_prev | sed 's/_/-/g'`
-  { $as_echo "$as_me: error: missing argument to $ac_option" >&2
-   { (exit 1); exit 1; }; }
+  as_fn_error "missing argument to $ac_option"
 fi
 
 if test -n "$ac_unrecognized_opts"; then
   case $enable_option_checking in
     no) ;;
-    fatal) { $as_echo "$as_me: error: unrecognized options: $ac_unrecognized_opts" >&2
-   { (exit 1); exit 1; }; } ;;
+    fatal) as_fn_error "unrecognized options: $ac_unrecognized_opts" ;;
     *)     $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;;
   esac
 fi
@@ -1421,8 +1368,7 @@
     [\\/$]* | ?:[\\/]* )  continue;;
     NONE | '' ) case $ac_var in *prefix ) continue;; esac;;
   esac
-  { $as_echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2
-   { (exit 1); exit 1; }; }
+  as_fn_error "expected an absolute directory name for --$ac_var: $ac_val"
 done
 
 # There might be people who depend on the old broken behavior: `$host'
@@ -1452,11 +1398,9 @@
 ac_pwd=`pwd` && test -n "$ac_pwd" &&
 ac_ls_di=`ls -di .` &&
 ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` ||
-  { $as_echo "$as_me: error: working directory cannot be determined" >&2
-   { (exit 1); exit 1; }; }
+  as_fn_error "working directory cannot be determined"
 test "X$ac_ls_di" = "X$ac_pwd_ls_di" ||
-  { $as_echo "$as_me: error: pwd does not report name of working directory" >&2
-   { (exit 1); exit 1; }; }
+  as_fn_error "pwd does not report name of working directory"
 
 
 # Find the source files, if location was not specified.
@@ -1495,13 +1439,11 @@
 fi
 if test ! -r "$srcdir/$ac_unique_file"; then
   test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .."
-  { $as_echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2
-   { (exit 1); exit 1; }; }
+  as_fn_error "cannot find sources ($ac_unique_file) in $srcdir"
 fi
 ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work"
 ac_abs_confdir=`(
-	cd "$srcdir" && test -r "./$ac_unique_file" || { $as_echo "$as_me: error: $ac_msg" >&2
-   { (exit 1); exit 1; }; }
+	cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error "$ac_msg"
 	pwd)`
 # When building in place, set srcdir=.
 if test "$ac_abs_confdir" = "$ac_pwd"; then
@@ -1633,10 +1575,9 @@
 Optional Packages:
   --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
   --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
-  --with-gnu-ld           assume the C compiler uses GNU ld [default=no]
   --with-pic              try to use only PIC/non-PIC objects [default=use
                           both]
-  --with-tags[=TAGS]      include additional configurations [automatic]
+  --with-gnu-ld           assume the C compiler uses GNU ld [default=no]
   --with-trimesh=opcode|gimpact|none
                           use the specified system for trimesh support
                           [default=opcode]
@@ -1657,8 +1598,6 @@
   CFLAGS      C compiler flags
   CPP         C preprocessor
   CXXCPP      C++ preprocessor
-  F77         Fortran 77 compiler command
-  FFLAGS      Fortran 77 compiler flags
   XMKMF       Path to xmkmf, Makefile generator for X Window System
 
 Use these variables to override the choices made by `configure' or to help
@@ -1728,416 +1667,927 @@
 if $ac_init_version; then
   cat <<\_ACEOF
 ODE configure 0.11
-generated by GNU Autoconf 2.63
+generated by GNU Autoconf 2.64
 
-Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
-2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
+Copyright (C) 2009 Free Software Foundation, Inc.
 This configure script is free software; the Free Software Foundation
 gives unlimited permission to copy, distribute and modify it.
 _ACEOF
   exit
 fi
-cat >config.log <<_ACEOF
-This file contains any messages produced by compilers while
-running configure, to aid debugging if configure makes a mistake.
 
-It was created by ODE $as_me 0.11, which was
-generated by GNU Autoconf 2.63.  Invocation command line was
+## ------------------------ ##
+## Autoconf initialization. ##
+## ------------------------ ##
+
+# ac_fn_cxx_try_compile LINENO
+# ----------------------------
+# Try to compile conftest.$ac_ext, and return whether this succeeded.
+ac_fn_cxx_try_compile ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  rm -f conftest.$ac_objext
+  if { { ac_try="$ac_compile"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_compile") 2>conftest.err
+  ac_status=$?
+  if test -s conftest.err; then
+    grep -v '^ *+' conftest.err >conftest.er1
+    cat conftest.er1 >&5
+    mv -f conftest.er1 conftest.err
+  fi
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } && {
+	 test -z "$ac_cxx_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest.$ac_objext; then :
+  ac_retval=0
+else
+  $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
 
-  $ $0 $@
+	ac_retval=1
+fi
+  eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
+  return $ac_retval
 
-_ACEOF
-exec 5>>config.log
-{
-cat <<_ASUNAME
-## --------- ##
-## Platform. ##
-## --------- ##
+} # ac_fn_cxx_try_compile
 
-hostname = `(hostname || uname -n) 2>/dev/null | sed 1q`
-uname -m = `(uname -m) 2>/dev/null || echo unknown`
-uname -r = `(uname -r) 2>/dev/null || echo unknown`
-uname -s = `(uname -s) 2>/dev/null || echo unknown`
-uname -v = `(uname -v) 2>/dev/null || echo unknown`
+# ac_fn_c_try_compile LINENO
+# --------------------------
+# Try to compile conftest.$ac_ext, and return whether this succeeded.
+ac_fn_c_try_compile ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  rm -f conftest.$ac_objext
+  if { { ac_try="$ac_compile"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_compile") 2>conftest.err
+  ac_status=$?
+  if test -s conftest.err; then
+    grep -v '^ *+' conftest.err >conftest.er1
+    cat conftest.er1 >&5
+    mv -f conftest.er1 conftest.err
+  fi
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest.$ac_objext; then :
+  ac_retval=0
+else
+  $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
 
-/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown`
-/bin/uname -X     = `(/bin/uname -X) 2>/dev/null     || echo unknown`
+	ac_retval=1
+fi
+  eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
+  return $ac_retval
 
-/bin/arch              = `(/bin/arch) 2>/dev/null              || echo unknown`
-/usr/bin/arch -k       = `(/usr/bin/arch -k) 2>/dev/null       || echo unknown`
-/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown`
-/usr/bin/hostinfo      = `(/usr/bin/hostinfo) 2>/dev/null      || echo unknown`
-/bin/machine           = `(/bin/machine) 2>/dev/null           || echo unknown`
-/usr/bin/oslevel       = `(/usr/bin/oslevel) 2>/dev/null       || echo unknown`
-/bin/universe          = `(/bin/universe) 2>/dev/null          || echo unknown`
+} # ac_fn_c_try_compile
 
-_ASUNAME
+# ac_fn_c_try_cpp LINENO
+# ----------------------
+# Try to preprocess conftest.$ac_ext, and return whether this succeeded.
+ac_fn_c_try_cpp ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  if { { ac_try="$ac_cpp conftest.$ac_ext"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_cpp conftest.$ac_ext") 2>conftest.err
+  ac_status=$?
+  if test -s conftest.err; then
+    grep -v '^ *+' conftest.err >conftest.er1
+    cat conftest.er1 >&5
+    mv -f conftest.er1 conftest.err
+  fi
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } >/dev/null && {
+	 test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       }; then :
+  ac_retval=0
+else
+  $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
 
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  $as_echo "PATH: $as_dir"
-done
-IFS=$as_save_IFS
+    ac_retval=1
+fi
+  eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
+  return $ac_retval
 
-} >&5
+} # ac_fn_c_try_cpp
 
-cat >&5 <<_ACEOF
+# ac_fn_c_try_link LINENO
+# -----------------------
+# Try to link conftest.$ac_ext, and return whether this succeeded.
+ac_fn_c_try_link ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  rm -f conftest.$ac_objext conftest$ac_exeext
+  if { { ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_link") 2>conftest.err
+  ac_status=$?
+  if test -s conftest.err; then
+    grep -v '^ *+' conftest.err >conftest.er1
+    cat conftest.er1 >&5
+    mv -f conftest.er1 conftest.err
+  fi
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest$ac_exeext && {
+	 test "$cross_compiling" = yes ||
+	 $as_test_x conftest$ac_exeext
+       }; then :
+  ac_retval=0
+else
+  $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
 
+	ac_retval=1
+fi
+  # Delete the IPA/IPO (Inter Procedural Analysis/Optimization) information
+  # created by the PGI compiler (conftest_ipa8_conftest.oo), as it would
+  # interfere with the next link command; also delete a directory that is
+  # left behind by Apple's compiler.  We do this before executing the actions.
+  rm -rf conftest.dSYM conftest_ipa8_conftest.oo
+  eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
+  return $ac_retval
 
-## ----------- ##
-## Core tests. ##
-## ----------- ##
+} # ac_fn_c_try_link
 
+# ac_fn_c_check_header_compile LINENO HEADER VAR INCLUDES
+# -------------------------------------------------------
+# Tests whether HEADER exists and can be compiled using the include files in
+# INCLUDES, setting the cache variable VAR accordingly.
+ac_fn_c_check_header_compile ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
+$as_echo_n "checking for $2... " >&6; }
+if { as_var=$3; eval "test \"\${$as_var+set}\" = set"; }; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+$4
+#include <$2>
 _ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  eval "$3=yes"
+else
+  eval "$3=no"
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+eval ac_res=\$$3
+	       { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+  eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
 
+} # ac_fn_c_check_header_compile
 
-# Keep a trace of the command line.
-# Strip out --no-create and --no-recursion so they do not pile up.
-# Strip out --silent because we don't want to record it for future runs.
-# Also quote any args containing shell meta-characters.
-# Make two passes to allow for proper duplicate-argument suppression.
-ac_configure_args=
-ac_configure_args0=
-ac_configure_args1=
-ac_must_keep_next=false
-for ac_pass in 1 2
-do
-  for ac_arg
-  do
-    case $ac_arg in
-    -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;;
-    -q | -quiet | --quiet | --quie | --qui | --qu | --q \
-    | -silent | --silent | --silen | --sile | --sil)
-      continue ;;
-    *\'*)
-      ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
-    esac
-    case $ac_pass in
-    1) ac_configure_args0="$ac_configure_args0 '$ac_arg'" ;;
-    2)
-      ac_configure_args1="$ac_configure_args1 '$ac_arg'"
-      if test $ac_must_keep_next = true; then
-	ac_must_keep_next=false # Got value, back to normal.
-      else
-	case $ac_arg in
-	  *=* | --config-cache | -C | -disable-* | --disable-* \
-	  | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \
-	  | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \
-	  | -with-* | --with-* | -without-* | --without-* | --x)
-	    case "$ac_configure_args0 " in
-	      "$ac_configure_args1"*" '$ac_arg' "* ) continue ;;
-	    esac
-	    ;;
-	  -* ) ac_must_keep_next=true ;;
-	esac
-      fi
-      ac_configure_args="$ac_configure_args '$ac_arg'"
-      ;;
-    esac
-  done
-done
-$as_unset ac_configure_args0 || test "${ac_configure_args0+set}" != set || { ac_configure_args0=; export ac_configure_args0; }
-$as_unset ac_configure_args1 || test "${ac_configure_args1+set}" != set || { ac_configure_args1=; export ac_configure_args1; }
+# ac_fn_c_try_run LINENO
+# ----------------------
+# Try to link conftest.$ac_ext, and return whether this succeeded. Assumes
+# that executables *can* be run.
+ac_fn_c_try_run ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  if { { ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_link") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } && { ac_try='./conftest$ac_exeext'
+  { { case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_try") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; }; then :
+  ac_retval=0
+else
+  $as_echo "$as_me: program exited with status $ac_status" >&5
+       $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
 
-# When interrupted or exit'd, cleanup temporary files, and complete
-# config.log.  We remove comments because anyway the quotes in there
-# would cause problems or look ugly.
-# WARNING: Use '\'' to represent an apostrophe within the trap.
-# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug.
-trap 'exit_status=$?
-  # Save into config.log some information that might help in debugging.
-  {
-    echo
+       ac_retval=$ac_status
+fi
+  rm -rf conftest.dSYM conftest_ipa8_conftest.oo
+  eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
+  return $ac_retval
 
-    cat <<\_ASBOX
-## ---------------- ##
-## Cache variables. ##
-## ---------------- ##
-_ASBOX
-    echo
-    # The following way of writing the cache mishandles newlines in values,
-(
-  for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do
-    eval ac_val=\$$ac_var
-    case $ac_val in #(
-    *${as_nl}*)
-      case $ac_var in #(
-      *_cv_*) { $as_echo "$as_me:$LINENO: WARNING: cache variable $ac_var contains a newline" >&5
-$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
-      esac
-      case $ac_var in #(
-      _ | IFS | as_nl) ;; #(
-      BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(
-      *) $as_unset $ac_var ;;
-      esac ;;
-    esac
-  done
-  (set) 2>&1 |
-    case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #(
-    *${as_nl}ac_space=\ *)
-      sed -n \
-	"s/'\''/'\''\\\\'\'''\''/g;
-	  s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p"
-      ;; #(
-    *)
-      sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
-      ;;
-    esac |
-    sort
-)
-    echo
+} # ac_fn_c_try_run
 
-    cat <<\_ASBOX
-## ----------------- ##
-## Output variables. ##
-## ----------------- ##
-_ASBOX
-    echo
-    for ac_var in $ac_subst_vars
-    do
-      eval ac_val=\$$ac_var
-      case $ac_val in
-      *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
-      esac
-      $as_echo "$ac_var='\''$ac_val'\''"
-    done | sort
-    echo
+# ac_fn_c_check_func LINENO FUNC VAR
+# ----------------------------------
+# Tests whether FUNC exists, setting the cache variable VAR accordingly
+ac_fn_c_check_func ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
+$as_echo_n "checking for $2... " >&6; }
+if { as_var=$3; eval "test \"\${$as_var+set}\" = set"; }; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+/* Define $2 to an innocuous variant, in case <limits.h> declares $2.
+   For example, HP-UX 11i <limits.h> declares gettimeofday.  */
+#define $2 innocuous_$2
 
-    if test -n "$ac_subst_files"; then
-      cat <<\_ASBOX
-## ------------------- ##
-## File substitutions. ##
-## ------------------- ##
-_ASBOX
-      echo
-      for ac_var in $ac_subst_files
-      do
-	eval ac_val=\$$ac_var
-	case $ac_val in
-	*\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
-	esac
-	$as_echo "$ac_var='\''$ac_val'\''"
-      done | sort
-      echo
-    fi
+/* System header to define __stub macros and hopefully few prototypes,
+    which can conflict with char $2 (); below.
+    Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+    <limits.h> exists even on freestanding compilers.  */
 
-    if test -s confdefs.h; then
-      cat <<\_ASBOX
-## ----------- ##
-## confdefs.h. ##
-## ----------- ##
-_ASBOX
-      echo
-      cat confdefs.h
-      echo
-    fi
-    test "$ac_signal" != 0 &&
-      $as_echo "$as_me: caught signal $ac_signal"
-    $as_echo "$as_me: exit $exit_status"
-  } >&5
-  rm -f core *.core core.conftest.* &&
-    rm -f -r conftest* confdefs* conf$$* $ac_clean_files &&
-    exit $exit_status
-' 0
-for ac_signal in 1 2 13 15; do
-  trap 'ac_signal='$ac_signal'; { (exit 1); exit 1; }' $ac_signal
-done
-ac_signal=0
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
 
-# confdefs.h avoids OS command line length limits that DEFS can exceed.
-rm -f -r conftest* confdefs.h
+#undef $2
 
-# Predefined preprocessor variables.
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char $2 ();
+/* The GNU C library defines this for functions which it implements
+    to always fail with ENOSYS.  Some functions are actually named
+    something starting with __ and the normal name is an alias.  */
+#if defined __stub_$2 || defined __stub___$2
+choke me
+#endif
 
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE_NAME "$PACKAGE_NAME"
+int
+main ()
+{
+return $2 ();
+  ;
+  return 0;
+}
 _ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  eval "$3=yes"
+else
+  eval "$3=no"
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+fi
+eval ac_res=\$$3
+	       { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+  eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
 
+} # ac_fn_c_check_func
 
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE_TARNAME "$PACKAGE_TARNAME"
-_ACEOF
+# ac_fn_cxx_try_cpp LINENO
+# ------------------------
+# Try to preprocess conftest.$ac_ext, and return whether this succeeded.
+ac_fn_cxx_try_cpp ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  if { { ac_try="$ac_cpp conftest.$ac_ext"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_cpp conftest.$ac_ext") 2>conftest.err
+  ac_status=$?
+  if test -s conftest.err; then
+    grep -v '^ *+' conftest.err >conftest.er1
+    cat conftest.er1 >&5
+    mv -f conftest.er1 conftest.err
+  fi
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } >/dev/null && {
+	 test -z "$ac_cxx_preproc_warn_flag$ac_cxx_werror_flag" ||
+	 test ! -s conftest.err
+       }; then :
+  ac_retval=0
+else
+  $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
 
+    ac_retval=1
+fi
+  eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
+  return $ac_retval
 
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE_VERSION "$PACKAGE_VERSION"
-_ACEOF
+} # ac_fn_cxx_try_cpp
 
+# ac_fn_cxx_try_link LINENO
+# -------------------------
+# Try to link conftest.$ac_ext, and return whether this succeeded.
+ac_fn_cxx_try_link ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  rm -f conftest.$ac_objext conftest$ac_exeext
+  if { { ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_link") 2>conftest.err
+  ac_status=$?
+  if test -s conftest.err; then
+    grep -v '^ *+' conftest.err >conftest.er1
+    cat conftest.er1 >&5
+    mv -f conftest.er1 conftest.err
+  fi
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } && {
+	 test -z "$ac_cxx_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest$ac_exeext && {
+	 test "$cross_compiling" = yes ||
+	 $as_test_x conftest$ac_exeext
+       }; then :
+  ac_retval=0
+else
+  $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
 
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE_STRING "$PACKAGE_STRING"
-_ACEOF
+	ac_retval=1
+fi
+  # Delete the IPA/IPO (Inter Procedural Analysis/Optimization) information
+  # created by the PGI compiler (conftest_ipa8_conftest.oo), as it would
+  # interfere with the next link command; also delete a directory that is
+  # left behind by Apple's compiler.  We do this before executing the actions.
+  rm -rf conftest.dSYM conftest_ipa8_conftest.oo
+  eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
+  return $ac_retval
 
+} # ac_fn_cxx_try_link
 
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT"
+# ac_fn_c_check_type LINENO TYPE VAR INCLUDES
+# -------------------------------------------
+# Tests whether TYPE exists after having included INCLUDES, setting cache
+# variable VAR accordingly.
+ac_fn_c_check_type ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
+$as_echo_n "checking for $2... " >&6; }
+if { as_var=$3; eval "test \"\${$as_var+set}\" = set"; }; then :
+  $as_echo_n "(cached) " >&6
+else
+  eval "$3=no"
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+$4
+int
+main ()
+{
+if (sizeof ($2))
+	 return 0;
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+$4
+int
+main ()
+{
+if (sizeof (($2)))
+	    return 0;
+  ;
+  return 0;
+}
 _ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+
+else
+  eval "$3=yes"
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+eval ac_res=\$$3
+	       { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+  eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
 
+} # ac_fn_c_check_type
 
-# Let the site file select an alternate cache file if it wants to.
-# Prefer an explicitly selected file to automatically selected ones.
-ac_site_file1=NONE
-ac_site_file2=NONE
-if test -n "$CONFIG_SITE"; then
-  ac_site_file1=$CONFIG_SITE
-elif test "x$prefix" != xNONE; then
-  ac_site_file1=$prefix/share/config.site
-  ac_site_file2=$prefix/etc/config.site
+# ac_fn_c_check_header_mongrel LINENO HEADER VAR INCLUDES
+# -------------------------------------------------------
+# Tests whether HEADER exists, giving a warning if it cannot be compiled using
+# the include files in INCLUDES and setting the cache variable VAR
+# accordingly.
+ac_fn_c_check_header_mongrel ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  if { as_var=$3; eval "test \"\${$as_var+set}\" = set"; }; then :
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
+$as_echo_n "checking for $2... " >&6; }
+if { as_var=$3; eval "test \"\${$as_var+set}\" = set"; }; then :
+  $as_echo_n "(cached) " >&6
+fi
+eval ac_res=\$$3
+	       { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
 else
-  ac_site_file1=$ac_default_prefix/share/config.site
-  ac_site_file2=$ac_default_prefix/etc/config.site
+  # Is the header compilable?
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 usability" >&5
+$as_echo_n "checking $2 usability... " >&6; }
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+$4
+#include <$2>
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_header_compiler=yes
+else
+  ac_header_compiler=no
 fi
-for ac_site_file in "$ac_site_file1" "$ac_site_file2"
-do
-  test "x$ac_site_file" = xNONE && continue
-  if test -r "$ac_site_file"; then
-    { $as_echo "$as_me:$LINENO: loading site script $ac_site_file" >&5
-$as_echo "$as_me: loading site script $ac_site_file" >&6;}
-    sed 's/^/| /' "$ac_site_file" >&5
-    . "$ac_site_file"
-  fi
-done
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_compiler" >&5
+$as_echo "$ac_header_compiler" >&6; }
 
-if test -r "$cache_file"; then
-  # Some versions of bash will fail to source /dev/null (special
-  # files actually), so we avoid doing that.
-  if test -f "$cache_file"; then
-    { $as_echo "$as_me:$LINENO: loading cache $cache_file" >&5
-$as_echo "$as_me: loading cache $cache_file" >&6;}
-    case $cache_file in
-      [\\/]* | ?:[\\/]* ) . "$cache_file";;
-      *)                      . "./$cache_file";;
-    esac
-  fi
+# Is the header present?
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 presence" >&5
+$as_echo_n "checking $2 presence... " >&6; }
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <$2>
+_ACEOF
+if ac_fn_c_try_cpp "$LINENO"; then :
+  ac_header_preproc=yes
 else
-  { $as_echo "$as_me:$LINENO: creating cache $cache_file" >&5
-$as_echo "$as_me: creating cache $cache_file" >&6;}
-  >$cache_file
+  ac_header_preproc=no
 fi
+rm -f conftest.err conftest.$ac_ext
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_preproc" >&5
+$as_echo "$ac_header_preproc" >&6; }
 
-# Check that the precious variables saved in the cache have kept the same
-# value.
-ac_cache_corrupted=false
-for ac_var in $ac_precious_vars; do
-  eval ac_old_set=\$ac_cv_env_${ac_var}_set
-  eval ac_new_set=\$ac_env_${ac_var}_set
-  eval ac_old_val=\$ac_cv_env_${ac_var}_value
-  eval ac_new_val=\$ac_env_${ac_var}_value
-  case $ac_old_set,$ac_new_set in
-    set,)
-      { $as_echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
-$as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;}
-      ac_cache_corrupted=: ;;
-    ,set)
-      { $as_echo "$as_me:$LINENO: error: \`$ac_var' was not set in the previous run" >&5
-$as_echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;}
-      ac_cache_corrupted=: ;;
-    ,);;
-    *)
-      if test "x$ac_old_val" != "x$ac_new_val"; then
-	# differences in whitespace do not lead to failure.
-	ac_old_val_w=`echo x $ac_old_val`
-	ac_new_val_w=`echo x $ac_new_val`
-	if test "$ac_old_val_w" != "$ac_new_val_w"; then
-	  { $as_echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5
-$as_echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;}
-	  ac_cache_corrupted=:
-	else
-	  { $as_echo "$as_me:$LINENO: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5
-$as_echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;}
-	  eval $ac_var=\$ac_old_val
-	fi
-	{ $as_echo "$as_me:$LINENO:   former value:  \`$ac_old_val'" >&5
-$as_echo "$as_me:   former value:  \`$ac_old_val'" >&2;}
-	{ $as_echo "$as_me:$LINENO:   current value: \`$ac_new_val'" >&5
-$as_echo "$as_me:   current value: \`$ac_new_val'" >&2;}
-      fi;;
-  esac
-  # Pass precious variables to config.status.
-  if test "$ac_new_set" = set; then
-    case $ac_new_val in
-    *\'*) ac_arg=$ac_var=`$as_echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
-    *) ac_arg=$ac_var=$ac_new_val ;;
-    esac
-    case " $ac_configure_args " in
-      *" '$ac_arg' "*) ;; # Avoid dups.  Use of quotes ensures accuracy.
-      *) ac_configure_args="$ac_configure_args '$ac_arg'" ;;
-    esac
-  fi
-done
-if $ac_cache_corrupted; then
-  { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5
-$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-  { $as_echo "$as_me:$LINENO: error: changes in the environment can compromise the build" >&5
-$as_echo "$as_me: error: changes in the environment can compromise the build" >&2;}
-  { { $as_echo "$as_me:$LINENO: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5
-$as_echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&2;}
-   { (exit 1); exit 1; }; }
+# So?  What about this header?
+case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in #((
+  yes:no: )
+    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&5
+$as_echo "$as_me: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&2;}
+    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5
+$as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;}
+    ;;
+  no:yes:* )
+    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: present but cannot be compiled" >&5
+$as_echo "$as_me: WARNING: $2: present but cannot be compiled" >&2;}
+    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2:     check for missing prerequisite headers?" >&5
+$as_echo "$as_me: WARNING: $2:     check for missing prerequisite headers?" >&2;}
+    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: see the Autoconf documentation" >&5
+$as_echo "$as_me: WARNING: $2: see the Autoconf documentation" >&2;}
+    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2:     section \"Present But Cannot Be Compiled\"" >&5
+$as_echo "$as_me: WARNING: $2:     section \"Present But Cannot Be Compiled\"" >&2;}
+    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5
+$as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;}
+( cat <<\_ASBOX
+## -------------------------- ##
+## Report this to ode@ode.org ##
+## -------------------------- ##
+_ASBOX
+     ) | sed "s/^/$as_me: WARNING:     /" >&2
+    ;;
+esac
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
+$as_echo_n "checking for $2... " >&6; }
+if { as_var=$3; eval "test \"\${$as_var+set}\" = set"; }; then :
+  $as_echo_n "(cached) " >&6
+else
+  eval "$3=\$ac_header_compiler"
+fi
+eval ac_res=\$$3
+	       { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
 fi
+  eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
 
+} # ac_fn_c_check_header_mongrel
+cat >config.log <<_ACEOF
+This file contains any messages produced by compilers while
+running configure, to aid debugging if configure makes a mistake.
 
+It was created by ODE $as_me 0.11, which was
+generated by GNU Autoconf 2.64.  Invocation command line was
 
+  $ $0 $@
 
+_ACEOF
+exec 5>>config.log
+{
+cat <<_ASUNAME
+## --------- ##
+## Platform. ##
+## --------- ##
 
+hostname = `(hostname || uname -n) 2>/dev/null | sed 1q`
+uname -m = `(uname -m) 2>/dev/null || echo unknown`
+uname -r = `(uname -r) 2>/dev/null || echo unknown`
+uname -s = `(uname -s) 2>/dev/null || echo unknown`
+uname -v = `(uname -v) 2>/dev/null || echo unknown`
 
+/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown`
+/bin/uname -X     = `(/bin/uname -X) 2>/dev/null     || echo unknown`
 
+/bin/arch              = `(/bin/arch) 2>/dev/null              || echo unknown`
+/usr/bin/arch -k       = `(/usr/bin/arch -k) 2>/dev/null       || echo unknown`
+/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown`
+/usr/bin/hostinfo      = `(/usr/bin/hostinfo) 2>/dev/null      || echo unknown`
+/bin/machine           = `(/bin/machine) 2>/dev/null           || echo unknown`
+/usr/bin/oslevel       = `(/usr/bin/oslevel) 2>/dev/null       || echo unknown`
+/bin/universe          = `(/bin/universe) 2>/dev/null          || echo unknown`
 
+_ASUNAME
 
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    $as_echo "PATH: $as_dir"
+  done
+IFS=$as_save_IFS
 
+} >&5
 
+cat >&5 <<_ACEOF
 
 
+## ----------- ##
+## Core tests. ##
+## ----------- ##
 
+_ACEOF
 
 
+# Keep a trace of the command line.
+# Strip out --no-create and --no-recursion so they do not pile up.
+# Strip out --silent because we don't want to record it for future runs.
+# Also quote any args containing shell meta-characters.
+# Make two passes to allow for proper duplicate-argument suppression.
+ac_configure_args=
+ac_configure_args0=
+ac_configure_args1=
+ac_must_keep_next=false
+for ac_pass in 1 2
+do
+  for ac_arg
+  do
+    case $ac_arg in
+    -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;;
+    -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+    | -silent | --silent | --silen | --sile | --sil)
+      continue ;;
+    *\'*)
+      ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
+    esac
+    case $ac_pass in
+    1) as_fn_append ac_configure_args0 " '$ac_arg'" ;;
+    2)
+      as_fn_append ac_configure_args1 " '$ac_arg'"
+      if test $ac_must_keep_next = true; then
+	ac_must_keep_next=false # Got value, back to normal.
+      else
+	case $ac_arg in
+	  *=* | --config-cache | -C | -disable-* | --disable-* \
+	  | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \
+	  | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \
+	  | -with-* | --with-* | -without-* | --without-* | --x)
+	    case "$ac_configure_args0 " in
+	      "$ac_configure_args1"*" '$ac_arg' "* ) continue ;;
+	    esac
+	    ;;
+	  -* ) ac_must_keep_next=true ;;
+	esac
+      fi
+      as_fn_append ac_configure_args " '$ac_arg'"
+      ;;
+    esac
+  done
+done
+{ ac_configure_args0=; unset ac_configure_args0;}
+{ ac_configure_args1=; unset ac_configure_args1;}
 
+# When interrupted or exit'd, cleanup temporary files, and complete
+# config.log.  We remove comments because anyway the quotes in there
+# would cause problems or look ugly.
+# WARNING: Use '\'' to represent an apostrophe within the trap.
+# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug.
+trap 'exit_status=$?
+  # Save into config.log some information that might help in debugging.
+  {
+    echo
 
+    cat <<\_ASBOX
+## ---------------- ##
+## Cache variables. ##
+## ---------------- ##
+_ASBOX
+    echo
+    # The following way of writing the cache mishandles newlines in values,
+(
+  for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do
+    eval ac_val=\$$ac_var
+    case $ac_val in #(
+    *${as_nl}*)
+      case $ac_var in #(
+      *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5
+$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
+      esac
+      case $ac_var in #(
+      _ | IFS | as_nl) ;; #(
+      BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(
+      *) { eval $ac_var=; unset $ac_var;} ;;
+      esac ;;
+    esac
+  done
+  (set) 2>&1 |
+    case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #(
+    *${as_nl}ac_space=\ *)
+      sed -n \
+	"s/'\''/'\''\\\\'\'''\''/g;
+	  s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p"
+      ;; #(
+    *)
+      sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
+      ;;
+    esac |
+    sort
+)
+    echo
 
+    cat <<\_ASBOX
+## ----------------- ##
+## Output variables. ##
+## ----------------- ##
+_ASBOX
+    echo
+    for ac_var in $ac_subst_vars
+    do
+      eval ac_val=\$$ac_var
+      case $ac_val in
+      *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
+      esac
+      $as_echo "$ac_var='\''$ac_val'\''"
+    done | sort
+    echo
 
+    if test -n "$ac_subst_files"; then
+      cat <<\_ASBOX
+## ------------------- ##
+## File substitutions. ##
+## ------------------- ##
+_ASBOX
+      echo
+      for ac_var in $ac_subst_files
+      do
+	eval ac_val=\$$ac_var
+	case $ac_val in
+	*\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
+	esac
+	$as_echo "$ac_var='\''$ac_val'\''"
+      done | sort
+      echo
+    fi
 
+    if test -s confdefs.h; then
+      cat <<\_ASBOX
+## ----------- ##
+## confdefs.h. ##
+## ----------- ##
+_ASBOX
+      echo
+      cat confdefs.h
+      echo
+    fi
+    test "$ac_signal" != 0 &&
+      $as_echo "$as_me: caught signal $ac_signal"
+    $as_echo "$as_me: exit $exit_status"
+  } >&5
+  rm -f core *.core core.conftest.* &&
+    rm -f -r conftest* confdefs* conf$$* $ac_clean_files &&
+    exit $exit_status
+' 0
+for ac_signal in 1 2 13 15; do
+  trap 'ac_signal='$ac_signal'; as_fn_exit 1' $ac_signal
+done
+ac_signal=0
 
+# confdefs.h avoids OS command line length limits that DEFS can exceed.
+rm -f -r conftest* confdefs.h
 
+$as_echo "/* confdefs.h */" > confdefs.h
 
+# Predefined preprocessor variables.
 
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_NAME "$PACKAGE_NAME"
+_ACEOF
 
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_TARNAME "$PACKAGE_TARNAME"
+_ACEOF
 
-# AC_CONFIG_SRCDIR([ode/src/ode.cpp])
-ODE_RELEASE=0.11
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_VERSION "$PACKAGE_VERSION"
+_ACEOF
 
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_STRING "$PACKAGE_STRING"
+_ACEOF
 
-# Those are instructions from the Libtool manual:
-#  1. Start with version information of `0:0:0' for each libtool library.
-#
-#  2. Update the version information only immediately before a public
-#     release of your software.  More frequent updates are unnecessary,
-#     and only guarantee that the current interface number gets larger
-#     faster.
-#
-#  3. If the library source code has changed at all since the last
-#     update, then increment REVISION (`C:R:A' becomes `C:r+1:A').
-#
-#  4. If any interfaces have been added, removed, or changed since the
-#     last update, increment CURRENT, and set REVISION to 0.
-#
-#  5. If any interfaces have been added since the last public release,
-#     then increment AGE.
-#
-#  6. If any interfaces have been removed since the last public release,
-#     then set AGE to 0.
-CURRENT=2
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_URL "$PACKAGE_URL"
+_ACEOF
+
+
+# Let the site file select an alternate cache file if it wants to.
+# Prefer an explicitly selected file to automatically selected ones.
+ac_site_file1=NONE
+ac_site_file2=NONE
+if test -n "$CONFIG_SITE"; then
+  ac_site_file1=$CONFIG_SITE
+elif test "x$prefix" != xNONE; then
+  ac_site_file1=$prefix/share/config.site
+  ac_site_file2=$prefix/etc/config.site
+else
+  ac_site_file1=$ac_default_prefix/share/config.site
+  ac_site_file2=$ac_default_prefix/etc/config.site
+fi
+for ac_site_file in "$ac_site_file1" "$ac_site_file2"
+do
+  test "x$ac_site_file" = xNONE && continue
+  if test -r "$ac_site_file"; then
+    { $as_echo "$as_me:${as_lineno-$LINENO}: loading site script $ac_site_file" >&5
+$as_echo "$as_me: loading site script $ac_site_file" >&6;}
+    sed 's/^/| /' "$ac_site_file" >&5
+    . "$ac_site_file"
+  fi
+done
+
+if test -r "$cache_file"; then
+  # Some versions of bash will fail to source /dev/null (special
+  # files actually), so we avoid doing that.
+  if test -f "$cache_file"; then
+    { $as_echo "$as_me:${as_lineno-$LINENO}: loading cache $cache_file" >&5
+$as_echo "$as_me: loading cache $cache_file" >&6;}
+    case $cache_file in
+      [\\/]* | ?:[\\/]* ) . "$cache_file";;
+      *)                      . "./$cache_file";;
+    esac
+  fi
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: creating cache $cache_file" >&5
+$as_echo "$as_me: creating cache $cache_file" >&6;}
+  >$cache_file
+fi
+
+# Check that the precious variables saved in the cache have kept the same
+# value.
+ac_cache_corrupted=false
+for ac_var in $ac_precious_vars; do
+  eval ac_old_set=\$ac_cv_env_${ac_var}_set
+  eval ac_new_set=\$ac_env_${ac_var}_set
+  eval ac_old_val=\$ac_cv_env_${ac_var}_value
+  eval ac_new_val=\$ac_env_${ac_var}_value
+  case $ac_old_set,$ac_new_set in
+    set,)
+      { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
+$as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;}
+      ac_cache_corrupted=: ;;
+    ,set)
+      { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was not set in the previous run" >&5
+$as_echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;}
+      ac_cache_corrupted=: ;;
+    ,);;
+    *)
+      if test "x$ac_old_val" != "x$ac_new_val"; then
+	# differences in whitespace do not lead to failure.
+	ac_old_val_w=`echo x $ac_old_val`
+	ac_new_val_w=`echo x $ac_new_val`
+	if test "$ac_old_val_w" != "$ac_new_val_w"; then
+	  { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' has changed since the previous run:" >&5
+$as_echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;}
+	  ac_cache_corrupted=:
+	else
+	  { $as_echo "$as_me:${as_lineno-$LINENO}: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5
+$as_echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;}
+	  eval $ac_var=\$ac_old_val
+	fi
+	{ $as_echo "$as_me:${as_lineno-$LINENO}:   former value:  \`$ac_old_val'" >&5
+$as_echo "$as_me:   former value:  \`$ac_old_val'" >&2;}
+	{ $as_echo "$as_me:${as_lineno-$LINENO}:   current value: \`$ac_new_val'" >&5
+$as_echo "$as_me:   current value: \`$ac_new_val'" >&2;}
+      fi;;
+  esac
+  # Pass precious variables to config.status.
+  if test "$ac_new_set" = set; then
+    case $ac_new_val in
+    *\'*) ac_arg=$ac_var=`$as_echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
+    *) ac_arg=$ac_var=$ac_new_val ;;
+    esac
+    case " $ac_configure_args " in
+      *" '$ac_arg' "*) ;; # Avoid dups.  Use of quotes ensures accuracy.
+      *) as_fn_append ac_configure_args " '$ac_arg'" ;;
+    esac
+  fi
+done
+if $ac_cache_corrupted; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+  { $as_echo "$as_me:${as_lineno-$LINENO}: error: changes in the environment can compromise the build" >&5
+$as_echo "$as_me: error: changes in the environment can compromise the build" >&2;}
+  as_fn_error "run \`make distclean' and/or \`rm $cache_file' and start over" "$LINENO" 5
+fi
+## -------------------- ##
+## Main body of script. ##
+## -------------------- ##
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+# AC_CONFIG_SRCDIR([ode/src/ode.cpp])
+ODE_RELEASE=0.11
+
+
+# Those are instructions from the Libtool manual:
+#  1. Start with version information of `0:0:0' for each libtool library.
+#
+#  2. Update the version information only immediately before a public
+#     release of your software.  More frequent updates are unnecessary,
+#     and only guarantee that the current interface number gets larger
+#     faster.
+#
+#  3. If the library source code has changed at all since the last
+#     update, then increment REVISION (`C:R:A' becomes `C:r+1:A').
+#
+#  4. If any interfaces have been added, removed, or changed since the
+#     last update, increment CURRENT, and set REVISION to 0.
+#
+#  5. If any interfaces have been added since the last public release,
+#     then increment AGE.
+#
+#  6. If any interfaces have been removed since the last public release,
+#     then set AGE to 0.
+CURRENT=2
 REVISION=0
 AGE=1
 
 # Check whether --enable-version-info was given.
-if test "${enable_version_info+set}" = set; then
+if test "${enable_version_info+set}" = set; then :
   enableval=$enable_version_info; version_info=$enableval
 else
   version_info=yes
@@ -2155,24 +2605,16 @@
 
 ac_aux_dir=
 for ac_dir in "$srcdir" "$srcdir/.." "$srcdir/../.."; do
-  if test -f "$ac_dir/install-sh"; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/install-sh -c"
-    break
-  elif test -f "$ac_dir/install.sh"; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/install.sh -c"
-    break
-  elif test -f "$ac_dir/shtool"; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/shtool install -c"
-    break
-  fi
+  for ac_t in install-sh install.sh shtool; do
+    if test -f "$ac_dir/$ac_t"; then
+      ac_aux_dir=$ac_dir
+      ac_install_sh="$ac_aux_dir/$ac_t -c"
+      break 2
+    fi
+  done
 done
 if test -z "$ac_aux_dir"; then
-  { { $as_echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" >&5
-$as_echo "$as_me: error: cannot find install-sh or install.sh in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" >&2;}
-   { (exit 1); exit 1; }; }
+  as_fn_error "cannot find install-sh, install.sh, or shtool in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" "$LINENO" 5
 fi
 
 # These three variables are undocumented and unsupported,
@@ -2186,35 +2628,27 @@
 
 # Make sure we can run config.sub.
 $SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 ||
-  { { $as_echo "$as_me:$LINENO: error: cannot run $SHELL $ac_aux_dir/config.sub" >&5
-$as_echo "$as_me: error: cannot run $SHELL $ac_aux_dir/config.sub" >&2;}
-   { (exit 1); exit 1; }; }
+  as_fn_error "cannot run $SHELL $ac_aux_dir/config.sub" "$LINENO" 5
 
-{ $as_echo "$as_me:$LINENO: checking build system type" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking build system type" >&5
 $as_echo_n "checking build system type... " >&6; }
-if test "${ac_cv_build+set}" = set; then
+if test "${ac_cv_build+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
   ac_build_alias=$build_alias
 test "x$ac_build_alias" = x &&
   ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"`
 test "x$ac_build_alias" = x &&
-  { { $as_echo "$as_me:$LINENO: error: cannot guess build type; you must specify one" >&5
-$as_echo "$as_me: error: cannot guess build type; you must specify one" >&2;}
-   { (exit 1); exit 1; }; }
+  as_fn_error "cannot guess build type; you must specify one" "$LINENO" 5
 ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` ||
-  { { $as_echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $ac_build_alias failed" >&5
-$as_echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $ac_build_alias failed" >&2;}
-   { (exit 1); exit 1; }; }
+  as_fn_error "$SHELL $ac_aux_dir/config.sub $ac_build_alias failed" "$LINENO" 5
 
 fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_build" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_build" >&5
 $as_echo "$ac_cv_build" >&6; }
 case $ac_cv_build in
 *-*-*) ;;
-*) { { $as_echo "$as_me:$LINENO: error: invalid value of canonical build" >&5
-$as_echo "$as_me: error: invalid value of canonical build" >&2;}
-   { (exit 1); exit 1; }; };;
+*) as_fn_error "invalid value of canonical build" "$LINENO" 5;;
 esac
 build=$ac_cv_build
 ac_save_IFS=$IFS; IFS='-'
@@ -2230,28 +2664,24 @@
 case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac
 
 
-{ $as_echo "$as_me:$LINENO: checking host system type" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking host system type" >&5
 $as_echo_n "checking host system type... " >&6; }
-if test "${ac_cv_host+set}" = set; then
+if test "${ac_cv_host+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
   if test "x$host_alias" = x; then
   ac_cv_host=$ac_cv_build
 else
   ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` ||
-    { { $as_echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $host_alias failed" >&5
-$as_echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $host_alias failed" >&2;}
-   { (exit 1); exit 1; }; }
+    as_fn_error "$SHELL $ac_aux_dir/config.sub $host_alias failed" "$LINENO" 5
 fi
 
 fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_host" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_host" >&5
 $as_echo "$ac_cv_host" >&6; }
 case $ac_cv_host in
 *-*-*) ;;
-*) { { $as_echo "$as_me:$LINENO: error: invalid value of canonical host" >&5
-$as_echo "$as_me: error: invalid value of canonical host" >&2;}
-   { (exit 1); exit 1; }; };;
+*) as_fn_error "invalid value of canonical host" "$LINENO" 5;;
 esac
 host=$ac_cv_host
 ac_save_IFS=$IFS; IFS='-'
@@ -2268,7 +2698,7 @@
 
 
 
-am__api_version='1.10'
+am__api_version='1.11'
 
 # Find a good install program.  We prefer a C program (faster),
 # so one script is as good as another.  But avoid the broken or
@@ -2284,10 +2714,10 @@
 # OS/2's system install, which has a completely different semantic
 # ./install, which can be erroneously created by make from ./install.sh.
 # Reject install programs that cannot install multiple files.
-{ $as_echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a BSD-compatible install" >&5
 $as_echo_n "checking for a BSD-compatible install... " >&6; }
 if test -z "$INSTALL"; then
-if test "${ac_cv_path_install+set}" = set; then
+if test "${ac_cv_path_install+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
   as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
@@ -2295,11 +2725,11 @@
 do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
-  # Account for people who put trailing slashes in PATH elements.
-case $as_dir/ in
-  ./ | .// | /cC/* | \
+    # Account for people who put trailing slashes in PATH elements.
+case $as_dir/ in #((
+  ./ | .// | /[cC]/* | \
   /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \
-  ?:\\/os2\\/install\\/* | ?:\\/OS2\\/INSTALL\\/* | \
+  ?:[\\/]os2[\\/]install[\\/]* | ?:[\\/]OS2[\\/]INSTALL[\\/]* | \
   /usr/ucb/* ) ;;
   *)
     # OSF1 and SCO ODT 3.0 have their own names for install.
@@ -2336,7 +2766,7 @@
     ;;
 esac
 
-done
+  done
 IFS=$as_save_IFS
 
 rm -rf conftest.one conftest.two conftest.dir
@@ -2352,7 +2782,7 @@
     INSTALL=$ac_install_sh
   fi
 fi
-{ $as_echo "$as_me:$LINENO: result: $INSTALL" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $INSTALL" >&5
 $as_echo "$INSTALL" >&6; }
 
 # Use test -z because SunOS4 sh mishandles braces in ${var-val}.
@@ -2363,21 +2793,34 @@
 
 test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
 
-{ $as_echo "$as_me:$LINENO: checking whether build environment is sane" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether build environment is sane" >&5
 $as_echo_n "checking whether build environment is sane... " >&6; }
 # Just in case
 sleep 1
 echo timestamp > conftest.file
+# Reject unsafe characters in $srcdir or the absolute working directory
+# name.  Accept space and tab only in the latter.
+am_lf='
+'
+case `pwd` in
+  *[\\\"\#\$\&\'\`$am_lf]*)
+    as_fn_error "unsafe absolute working directory name" "$LINENO" 5;;
+esac
+case $srcdir in
+  *[\\\"\#\$\&\'\`$am_lf\ \	]*)
+    as_fn_error "unsafe srcdir value: \`$srcdir'" "$LINENO" 5;;
+esac
+
 # Do `set' in a subshell so we don't clobber the current shell's
 # arguments.  Must try -L first in case configure is actually a
 # symlink; some systems play weird games with the mod time of symlinks
 # (eg FreeBSD returns the mod time of the symlink's containing
 # directory).
 if (
-   set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null`
+   set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`
    if test "$*" = "X"; then
       # -L didn't work.
-      set X `ls -t $srcdir/configure conftest.file`
+      set X `ls -t "$srcdir/configure" conftest.file`
    fi
    rm -f conftest.file
    if test "$*" != "X $srcdir/configure conftest.file" \
@@ -2387,11 +2830,8 @@
       # if, for instance, CONFIG_SHELL is bash and it inherits a
       # broken ls alias from the environment.  This has actually
       # happened.  Such a system could not be considered "sane".
-      { { $as_echo "$as_me:$LINENO: error: ls -t appears to fail.  Make sure there is not a broken
-alias in your environment" >&5
-$as_echo "$as_me: error: ls -t appears to fail.  Make sure there is not a broken
-alias in your environment" >&2;}
-   { (exit 1); exit 1; }; }
+      as_fn_error "ls -t appears to fail.  Make sure there is not a broken
+alias in your environment" "$LINENO" 5
    fi
 
    test "$2" = conftest.file
@@ -2400,13 +2840,10 @@
    # Ok.
    :
 else
-   { { $as_echo "$as_me:$LINENO: error: newly created file is older than distributed files!
-Check your system clock" >&5
-$as_echo "$as_me: error: newly created file is older than distributed files!
-Check your system clock" >&2;}
-   { (exit 1); exit 1; }; }
+   as_fn_error "newly created file is older than distributed files!
+Check your system clock" "$LINENO" 5
 fi
-{ $as_echo "$as_me:$LINENO: result: yes" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
 $as_echo "yes" >&6; }
 test "$program_prefix" != NONE &&
   program_transform_name="s&^&$program_prefix&;$program_transform_name"
@@ -2421,20 +2858,136 @@
 # expand $ac_aux_dir to an absolute path
 am_aux_dir=`cd $ac_aux_dir && pwd`
 
-test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing"
+if test x"${MISSING+set}" != xset; then
+  case $am_aux_dir in
+  *\ * | *\	*)
+    MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;;
+  *)
+    MISSING="\${SHELL} $am_aux_dir/missing" ;;
+  esac
+fi
 # Use eval to expand $SHELL
 if eval "$MISSING --run true"; then
   am_missing_run="$MISSING --run "
 else
   am_missing_run=
-  { $as_echo "$as_me:$LINENO: WARNING: \`missing' script is too old or missing" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`missing' script is too old or missing" >&5
 $as_echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;}
 fi
 
-{ $as_echo "$as_me:$LINENO: checking for a thread-safe mkdir -p" >&5
+if test x"${install_sh}" != xset; then
+  case $am_aux_dir in
+  *\ * | *\	*)
+    install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;;
+  *)
+    install_sh="\${SHELL} $am_aux_dir/install-sh"
+  esac
+fi
+
+# Installed binaries are usually stripped using `strip' when the user
+# run `make install-strip'.  However `strip' might not be the right
+# tool to use in cross-compilation environments, therefore Automake
+# will honor the `STRIP' environment variable to overrule this program.
+if test "$cross_compiling" != no; then
+  if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
+set dummy ${ac_tool_prefix}strip; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_STRIP+set}" = set; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$STRIP"; then
+  ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_STRIP="${ac_tool_prefix}strip"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+STRIP=$ac_cv_prog_STRIP
+if test -n "$STRIP"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5
+$as_echo "$STRIP" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_STRIP"; then
+  ac_ct_STRIP=$STRIP
+  # Extract the first word of "strip", so it can be a program name with args.
+set dummy strip; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_STRIP"; then
+  ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_STRIP="strip"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
+if test -n "$ac_ct_STRIP"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5
+$as_echo "$ac_ct_STRIP" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_STRIP" = x; then
+    STRIP=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    STRIP=$ac_ct_STRIP
+  fi
+else
+  STRIP="$ac_cv_prog_STRIP"
+fi
+
+fi
+INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a thread-safe mkdir -p" >&5
 $as_echo_n "checking for a thread-safe mkdir -p... " >&6; }
 if test -z "$MKDIR_P"; then
-  if test "${ac_cv_path_mkdir+set}" = set; then
+  if test "${ac_cv_path_mkdir+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
   as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
@@ -2442,7 +2995,7 @@
 do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
-  for ac_prog in mkdir gmkdir; do
+    for ac_prog in mkdir gmkdir; do
 	 for ac_exec_ext in '' $ac_executable_extensions; do
 	   { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; } || continue
 	   case `"$as_dir/$ac_prog$ac_exec_ext" --version 2>&1` in #(
@@ -2454,7 +3007,7 @@
 	   esac
 	 done
        done
-done
+  done
 IFS=$as_save_IFS
 
 fi
@@ -2470,7 +3023,7 @@
     MKDIR_P="$ac_install_sh -d"
   fi
 fi
-{ $as_echo "$as_me:$LINENO: result: $MKDIR_P" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $MKDIR_P" >&5
 $as_echo "$MKDIR_P" >&6; }
 
 mkdir_p="$MKDIR_P"
@@ -2483,9 +3036,9 @@
 do
   # Extract the first word of "$ac_prog", so it can be a program name with args.
 set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 $as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_AWK+set}" = set; then
+if test "${ac_cv_prog_AWK+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
   if test -n "$AWK"; then
@@ -2496,24 +3049,24 @@
 do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
   if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_AWK="$ac_prog"
-    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
-done
+  done
 IFS=$as_save_IFS
 
 fi
 fi
 AWK=$ac_cv_prog_AWK
 if test -n "$AWK"; then
-  { $as_echo "$as_me:$LINENO: result: $AWK" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AWK" >&5
 $as_echo "$AWK" >&6; }
 else
-  { $as_echo "$as_me:$LINENO: result: no" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
 $as_echo "no" >&6; }
 fi
 
@@ -2521,11 +3074,11 @@
   test -n "$AWK" && break
 done
 
-{ $as_echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ${MAKE-make} sets \$(MAKE)" >&5
 $as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; }
 set x ${MAKE-make}
 ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'`
-if { as_var=ac_cv_prog_make_${ac_make}_set; eval "test \"\${$as_var+set}\" = set"; }; then
+if { as_var=ac_cv_prog_make_${ac_make}_set; eval "test \"\${$as_var+set}\" = set"; }; then :
   $as_echo_n "(cached) " >&6
 else
   cat >conftest.make <<\_ACEOF
@@ -2543,11 +3096,11 @@
 rm -f conftest.make
 fi
 if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then
-  { $as_echo "$as_me:$LINENO: result: yes" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
 $as_echo "yes" >&6; }
   SET_MAKE=
 else
-  { $as_echo "$as_me:$LINENO: result: no" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
 $as_echo "no" >&6; }
   SET_MAKE="MAKE=${MAKE-make}"
 fi
@@ -2567,9 +3120,7 @@
   am__isrc=' -I$(srcdir)'
   # test to see if srcdir already configured
   if test -f $srcdir/config.status; then
-    { { $as_echo "$as_me:$LINENO: error: source directory already configured; run \"make distclean\" there first" >&5
-$as_echo "$as_me: error: source directory already configured; run \"make distclean\" there first" >&2;}
-   { (exit 1); exit 1; }; }
+    as_fn_error "source directory already configured; run \"make distclean\" there first" "$LINENO" 5
   fi
 fi
 
@@ -2613,111 +3164,9 @@
 
 MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"}
 
-install_sh=${install_sh-"\$(SHELL) $am_aux_dir/install-sh"}
-
-# Installed binaries are usually stripped using `strip' when the user
-# run `make install-strip'.  However `strip' might not be the right
-# tool to use in cross-compilation environments, therefore Automake
-# will honor the `STRIP' environment variable to overrule this program.
-if test "$cross_compiling" != no; then
-  if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
-set dummy ${ac_tool_prefix}strip; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_STRIP+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$STRIP"; then
-  ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-    ac_cv_prog_STRIP="${ac_tool_prefix}strip"
-    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-IFS=$as_save_IFS
-
-fi
-fi
-STRIP=$ac_cv_prog_STRIP
-if test -n "$STRIP"; then
-  { $as_echo "$as_me:$LINENO: result: $STRIP" >&5
-$as_echo "$STRIP" >&6; }
-else
-  { $as_echo "$as_me:$LINENO: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-fi
-if test -z "$ac_cv_prog_STRIP"; then
-  ac_ct_STRIP=$STRIP
-  # Extract the first word of "strip", so it can be a program name with args.
-set dummy strip; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$ac_ct_STRIP"; then
-  ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-    ac_cv_prog_ac_ct_STRIP="strip"
-    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
-if test -n "$ac_ct_STRIP"; then
-  { $as_echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5
-$as_echo "$ac_ct_STRIP" >&6; }
-else
-  { $as_echo "$as_me:$LINENO: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-  if test "x$ac_ct_STRIP" = x; then
-    STRIP=":"
-  else
-    case $cross_compiling:$ac_tool_warned in
-yes:)
-{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5
-$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
-ac_tool_warned=yes ;;
-esac
-    STRIP=$ac_ct_STRIP
-  fi
-else
-  STRIP="$ac_cv_prog_STRIP"
-fi
-
-fi
-INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
-
-# We need awk for the "check" target.  The system "awk" is bad on
-# some platforms.
-# Always define AMTAR for backward compatibility.
+# We need awk for the "check" target.  The system "awk" is bad on
+# some platforms.
+# Always define AMTAR for backward compatibility.
 
 AMTAR=${AMTAR-"${am_missing_run}tar"}
 
@@ -2730,11 +3179,11 @@
 ac_config_headers="$ac_config_headers ode/src/config.h"
 
 
-{ $as_echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ${MAKE-make} sets \$(MAKE)" >&5
 $as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; }
 set x ${MAKE-make}
 ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'`
-if { as_var=ac_cv_prog_make_${ac_make}_set; eval "test \"\${$as_var+set}\" = set"; }; then
+if { as_var=ac_cv_prog_make_${ac_make}_set; eval "test \"\${$as_var+set}\" = set"; }; then :
   $as_echo_n "(cached) " >&6
 else
   cat >conftest.make <<\_ACEOF
@@ -2752,11 +3201,11 @@
 rm -f conftest.make
 fi
 if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then
-  { $as_echo "$as_me:$LINENO: result: yes" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
 $as_echo "yes" >&6; }
   SET_MAKE=
 else
-  { $as_echo "$as_me:$LINENO: result: no" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
 $as_echo "no" >&6; }
   SET_MAKE="MAKE=${MAKE-make}"
 fi
@@ -2775,9 +3224,9 @@
   do
     # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
 set dummy $ac_tool_prefix$ac_prog; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 $as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_CXX+set}" = set; then
+if test "${ac_cv_prog_CXX+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
   if test -n "$CXX"; then
@@ -2788,24 +3237,24 @@
 do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
   if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_CXX="$ac_tool_prefix$ac_prog"
-    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
-done
+  done
 IFS=$as_save_IFS
 
 fi
 fi
 CXX=$ac_cv_prog_CXX
 if test -n "$CXX"; then
-  { $as_echo "$as_me:$LINENO: result: $CXX" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CXX" >&5
 $as_echo "$CXX" >&6; }
 else
-  { $as_echo "$as_me:$LINENO: result: no" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
 $as_echo "no" >&6; }
 fi
 
@@ -2819,9 +3268,9 @@
 do
   # Extract the first word of "$ac_prog", so it can be a program name with args.
 set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 $as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_ac_ct_CXX+set}" = set; then
+if test "${ac_cv_prog_ac_ct_CXX+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
   if test -n "$ac_ct_CXX"; then
@@ -2832,24 +3281,24 @@
 do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
   if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_ac_ct_CXX="$ac_prog"
-    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
-done
+  done
 IFS=$as_save_IFS
 
 fi
 fi
 ac_ct_CXX=$ac_cv_prog_ac_ct_CXX
 if test -n "$ac_ct_CXX"; then
-  { $as_echo "$as_me:$LINENO: result: $ac_ct_CXX" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CXX" >&5
 $as_echo "$ac_ct_CXX" >&6; }
 else
-  { $as_echo "$as_me:$LINENO: result: no" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
 $as_echo "no" >&6; }
 fi
 
@@ -2862,7 +3311,7 @@
   else
     case $cross_compiling:$ac_tool_warned in
 yes:)
-{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
 ac_tool_warned=yes ;;
 esac
@@ -2873,64 +3322,49 @@
   fi
 fi
 # Provide some information about the compiler.
-$as_echo "$as_me:$LINENO: checking for C++ compiler version" >&5
+$as_echo "$as_me:${as_lineno-$LINENO}: checking for C++ compiler version" >&5
 set X $ac_compile
 ac_compiler=$2
-{ (ac_try="$ac_compiler --version >&5"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_compiler --version >&5") 2>&5
-  ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }
-{ (ac_try="$ac_compiler -v >&5"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_compiler -v >&5") 2>&5
-  ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }
-{ (ac_try="$ac_compiler -V >&5"
+for ac_option in --version -v -V -qversion; do
+  { { ac_try="$ac_compiler $ac_option >&5"
 case "(($ac_try" in
   *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
   *) ac_try_echo=$ac_try;;
 esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_compiler -V >&5") 2>&5
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_compiler $ac_option >&5") 2>conftest.err
   ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }
+  if test -s conftest.err; then
+    sed '10a\
+... rest of stderr output deleted ...
+         10q' conftest.err >conftest.er1
+    cat conftest.er1 >&5
+    rm -f conftest.er1 conftest.err
+  fi
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }
+done
 
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
-
+#include <stdio.h>
 int
 main ()
 {
+FILE *f = fopen ("conftest.out", "w");
+ return ferror (f) || fclose (f) != 0;
 
   ;
   return 0;
 }
 _ACEOF
 ac_clean_files_save=$ac_clean_files
-ac_clean_files="$ac_clean_files a.out a.out.dSYM a.exe b.out"
+ac_clean_files="$ac_clean_files a.out a.out.dSYM a.exe b.out conftest.out"
 # Try to create an executable without -o first, disregard a.out.
 # It will help us diagnose broken compilers, and finding out an intuition
 # of exeext.
-{ $as_echo "$as_me:$LINENO: checking for C++ compiler default output file name" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for C++ compiler default output file name" >&5
 $as_echo_n "checking for C++ compiler default output file name... " >&6; }
 ac_link_default=`$as_echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'`
 
@@ -2947,17 +3381,17 @@
 done
 rm -f $ac_rmfiles
 
-if { (ac_try="$ac_link_default"
+if { { ac_try="$ac_link_default"
 case "(($ac_try" in
   *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
   *) ac_try_echo=$ac_try;;
 esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
   (eval "$ac_link_default") 2>&5
   ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; then
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then :
   # Autoconf-2.13 could set the ac_cv_exeext variable to `no'.
 # So ignore a value of `no', otherwise this would lead to `EXEEXT = no'
 # in a Makefile.  We should not override ac_cv_exeext if it was cached,
@@ -2974,7 +3408,7 @@
 	# certainly right.
 	break;;
     *.* )
-        if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no;
+	if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no;
 	then :; else
 	   ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
 	fi
@@ -2993,84 +3427,75 @@
 else
   ac_file=''
 fi
-
-{ $as_echo "$as_me:$LINENO: result: $ac_file" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_file" >&5
 $as_echo "$ac_file" >&6; }
-if test -z "$ac_file"; then
+if test -z "$ac_file"; then :
   $as_echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
-{ { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5
+{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-{ { $as_echo "$as_me:$LINENO: error: C++ compiler cannot create executables
-See \`config.log' for more details." >&5
-$as_echo "$as_me: error: C++ compiler cannot create executables
-See \`config.log' for more details." >&2;}
-   { (exit 77); exit 77; }; }; }
+{ as_fn_set_status 77
+as_fn_error "C++ compiler cannot create executables
+See \`config.log' for more details." "$LINENO" 5; }; }
 fi
-
 ac_exeext=$ac_cv_exeext
 
 # Check that the compiler produces executables we can run.  If not, either
 # the compiler is broken, or we cross compile.
-{ $as_echo "$as_me:$LINENO: checking whether the C++ compiler works" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C++ compiler works" >&5
 $as_echo_n "checking whether the C++ compiler works... " >&6; }
-# FIXME: These cross compiler hacks should be removed for Autoconf 3.0
 # If not cross compiling, check that we can run a simple program.
 if test "$cross_compiling" != yes; then
   if { ac_try='./$ac_file'
-  { (case "(($ac_try" in
+  { { case "(($ac_try" in
   *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
   *) ac_try_echo=$ac_try;;
 esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
   (eval "$ac_try") 2>&5
   ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; }; then
     cross_compiling=no
   else
     if test "$cross_compiling" = maybe; then
 	cross_compiling=yes
     else
-	{ { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5
+	{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-{ { $as_echo "$as_me:$LINENO: error: cannot run C++ compiled programs.
+as_fn_error "cannot run C++ compiled programs.
 If you meant to cross compile, use \`--host'.
-See \`config.log' for more details." >&5
-$as_echo "$as_me: error: cannot run C++ compiled programs.
-If you meant to cross compile, use \`--host'.
-See \`config.log' for more details." >&2;}
-   { (exit 1); exit 1; }; }; }
+See \`config.log' for more details." "$LINENO" 5; }
     fi
   fi
 fi
-{ $as_echo "$as_me:$LINENO: result: yes" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
 $as_echo "yes" >&6; }
 
-rm -f -r a.out a.out.dSYM a.exe conftest$ac_cv_exeext b.out
+rm -f -r a.out a.out.dSYM a.exe conftest$ac_cv_exeext b.out conftest.out
 ac_clean_files=$ac_clean_files_save
 # Check that the compiler produces executables we can run.  If not, either
 # the compiler is broken, or we cross compile.
-{ $as_echo "$as_me:$LINENO: checking whether we are cross compiling" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are cross compiling" >&5
 $as_echo_n "checking whether we are cross compiling... " >&6; }
-{ $as_echo "$as_me:$LINENO: result: $cross_compiling" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $cross_compiling" >&5
 $as_echo "$cross_compiling" >&6; }
 
-{ $as_echo "$as_me:$LINENO: checking for suffix of executables" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of executables" >&5
 $as_echo_n "checking for suffix of executables... " >&6; }
-if { (ac_try="$ac_link"
+if { { ac_try="$ac_link"
 case "(($ac_try" in
   *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
   *) ac_try_echo=$ac_try;;
 esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
   (eval "$ac_link") 2>&5
   ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; then
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then :
   # If both `conftest.exe' and `conftest' are `present' (well, observable)
 # catch `conftest.exe'.  For instance with Cygwin, `ls conftest' will
 # work properly (i.e., refer to `conftest.exe'), while it won't with
@@ -3085,32 +3510,24 @@
   esac
 done
 else
-  { { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5
+  { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-{ { $as_echo "$as_me:$LINENO: error: cannot compute suffix of executables: cannot compile and link
-See \`config.log' for more details." >&5
-$as_echo "$as_me: error: cannot compute suffix of executables: cannot compile and link
-See \`config.log' for more details." >&2;}
-   { (exit 1); exit 1; }; }; }
+as_fn_error "cannot compute suffix of executables: cannot compile and link
+See \`config.log' for more details." "$LINENO" 5; }
 fi
-
 rm -f conftest$ac_cv_exeext
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_exeext" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_exeext" >&5
 $as_echo "$ac_cv_exeext" >&6; }
 
 rm -f conftest.$ac_ext
 EXEEXT=$ac_cv_exeext
 ac_exeext=$EXEEXT
-{ $as_echo "$as_me:$LINENO: checking for suffix of object files" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of object files" >&5
 $as_echo_n "checking for suffix of object files... " >&6; }
-if test "${ac_cv_objext+set}" = set; then
+if test "${ac_cv_objext+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 
 int
@@ -3122,17 +3539,17 @@
 }
 _ACEOF
 rm -f conftest.o conftest.obj
-if { (ac_try="$ac_compile"
+if { { ac_try="$ac_compile"
 case "(($ac_try" in
   *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
   *) ac_try_echo=$ac_try;;
 esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
   (eval "$ac_compile") 2>&5
   ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; then
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then :
   for ac_file in conftest.o conftest.obj conftest.*; do
   test -f "$ac_file" || continue;
   case $ac_file in
@@ -3145,31 +3562,23 @@
   $as_echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
-{ { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5
+{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-{ { $as_echo "$as_me:$LINENO: error: cannot compute suffix of object files: cannot compile
-See \`config.log' for more details." >&5
-$as_echo "$as_me: error: cannot compute suffix of object files: cannot compile
-See \`config.log' for more details." >&2;}
-   { (exit 1); exit 1; }; }; }
+as_fn_error "cannot compute suffix of object files: cannot compile
+See \`config.log' for more details." "$LINENO" 5; }
 fi
-
 rm -f conftest.$ac_cv_objext conftest.$ac_ext
 fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_objext" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_objext" >&5
 $as_echo "$ac_cv_objext" >&6; }
 OBJEXT=$ac_cv_objext
 ac_objext=$OBJEXT
-{ $as_echo "$as_me:$LINENO: checking whether we are using the GNU C++ compiler" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C++ compiler" >&5
 $as_echo_n "checking whether we are using the GNU C++ compiler... " >&6; }
-if test "${ac_cv_cxx_compiler_gnu+set}" = set; then
+if test "${ac_cv_cxx_compiler_gnu+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 
 int
@@ -3183,37 +3592,16 @@
   return 0;
 }
 _ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_compile") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_cxx_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest.$ac_objext; then
+if ac_fn_cxx_try_compile "$LINENO"; then :
   ac_compiler_gnu=yes
 else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-	ac_compiler_gnu=no
+  ac_compiler_gnu=no
 fi
-
 rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
 ac_cv_cxx_compiler_gnu=$ac_compiler_gnu
 
 fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_cxx_compiler_gnu" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_cxx_compiler_gnu" >&5
 $as_echo "$ac_cv_cxx_compiler_gnu" >&6; }
 if test $ac_compiler_gnu = yes; then
   GXX=yes
@@ -3222,20 +3610,16 @@
 fi
 ac_test_CXXFLAGS=${CXXFLAGS+set}
 ac_save_CXXFLAGS=$CXXFLAGS
-{ $as_echo "$as_me:$LINENO: checking whether $CXX accepts -g" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CXX accepts -g" >&5
 $as_echo_n "checking whether $CXX accepts -g... " >&6; }
-if test "${ac_cv_prog_cxx_g+set}" = set; then
+if test "${ac_cv_prog_cxx_g+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
   ac_save_cxx_werror_flag=$ac_cxx_werror_flag
    ac_cxx_werror_flag=yes
    ac_cv_prog_cxx_g=no
    CXXFLAGS="-g"
-   cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+   cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 
 int
@@ -3246,35 +3630,11 @@
   return 0;
 }
 _ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_compile") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_cxx_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest.$ac_objext; then
+if ac_fn_cxx_try_compile "$LINENO"; then :
   ac_cv_prog_cxx_g=yes
 else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-	CXXFLAGS=""
-      cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+  CXXFLAGS=""
+      cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 
 int
@@ -3285,36 +3645,12 @@
   return 0;
 }
 _ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_compile") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_cxx_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest.$ac_objext; then
-  :
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
+if ac_fn_cxx_try_compile "$LINENO"; then :
 
-	ac_cxx_werror_flag=$ac_save_cxx_werror_flag
+else
+  ac_cxx_werror_flag=$ac_save_cxx_werror_flag
 	 CXXFLAGS="-g"
-	 cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+	 cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 
 int
@@ -3325,42 +3661,17 @@
   return 0;
 }
 _ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_compile") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_cxx_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest.$ac_objext; then
+if ac_fn_cxx_try_compile "$LINENO"; then :
   ac_cv_prog_cxx_g=yes
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-
 fi
-
 rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
 fi
-
 rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
 fi
-
 rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
    ac_cxx_werror_flag=$ac_save_cxx_werror_flag
 fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_prog_cxx_g" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cxx_g" >&5
 $as_echo "$ac_cv_prog_cxx_g" >&6; }
 if test "$ac_test_CXXFLAGS" = set; then
   CXXFLAGS=$ac_save_CXXFLAGS
@@ -3390,44 +3701,44 @@
 am_make=${MAKE-make}
 cat > confinc << 'END'
 am__doit:
-	@echo done
+	@echo this is the am__doit target
 .PHONY: am__doit
 END
 # If we don't find an include directive, just comment out the code.
-{ $as_echo "$as_me:$LINENO: checking for style of include used by $am_make" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for style of include used by $am_make" >&5
 $as_echo_n "checking for style of include used by $am_make... " >&6; }
 am__include="#"
 am__quote=
 _am_result=none
 # First try GNU make style include.
 echo "include confinc" > confmf
-# We grep out `Entering directory' and `Leaving directory'
-# messages which can occur if `w' ends up in MAKEFLAGS.
-# In particular we don't look at `^make:' because GNU make might
-# be invoked under some other name (usually "gmake"), in which
-# case it prints its new name instead of `make'.
-if test "`$am_make -s -f confmf 2> /dev/null | grep -v 'ing directory'`" = "done"; then
-   am__include=include
-   am__quote=
-   _am_result=GNU
-fi
+# Ignore all kinds of additional output from `make'.
+case `$am_make -s -f confmf 2> /dev/null` in #(
+*the\ am__doit\ target*)
+  am__include=include
+  am__quote=
+  _am_result=GNU
+  ;;
+esac
 # Now try BSD make style include.
 if test "$am__include" = "#"; then
    echo '.include "confinc"' > confmf
-   if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then
-      am__include=.include
-      am__quote="\""
-      _am_result=BSD
-   fi
+   case `$am_make -s -f confmf 2> /dev/null` in #(
+   *the\ am__doit\ target*)
+     am__include=.include
+     am__quote="\""
+     _am_result=BSD
+     ;;
+   esac
 fi
 
 
-{ $as_echo "$as_me:$LINENO: result: $_am_result" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $_am_result" >&5
 $as_echo "$_am_result" >&6; }
 rm -f confinc confmf
 
 # Check whether --enable-dependency-tracking was given.
-if test "${enable_dependency_tracking+set}" = set; then
+if test "${enable_dependency_tracking+set}" = set; then :
   enableval=$enable_dependency_tracking;
 fi
 
@@ -3447,9 +3758,9 @@
 
 depcc="$CXX"  am_compiler_list=
 
-{ $as_echo "$as_me:$LINENO: checking dependency style of $depcc" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5
 $as_echo_n "checking dependency style of $depcc... " >&6; }
-if test "${am_cv_CXX_dependencies_compiler_type+set}" = set; then
+if test "${am_cv_CXX_dependencies_compiler_type+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
   if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
@@ -3475,6 +3786,11 @@
   if test "$am_compiler_list" = ""; then
      am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp`
   fi
+  am__universal=false
+  case " $depcc " in #(
+     *\ -arch\ *\ -arch\ *) am__universal=true ;;
+     esac
+
   for depmode in $am_compiler_list; do
     # Setup a source with many dependencies, because some compilers
     # like to wrap large dependency lists on column 80 (with \), and
@@ -3492,7 +3808,17 @@
     done
     echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
 
+    # We check with `-c' and `-o' for the sake of the "dashmstdout"
+    # mode.  It turns out that the SunPro C++ compiler does not properly
+    # handle `-M -o', and we need to detect this.  Also, some Intel
+    # versions had trouble with output in subdirs
+    am__obj=sub/conftest.${OBJEXT-o}
+    am__minus_obj="-o $am__obj"
     case $depmode in
+    gcc)
+      # This depmode causes a compiler race in universal mode.
+      test "$am__universal" = false || continue
+      ;;
     nosideeffect)
       # after this tag, mechanisms are not by side-effect, so they'll
       # only be used when explicitly requested
@@ -3502,19 +3828,23 @@
 	break
       fi
       ;;
+    msvisualcpp | msvcmsys)
+      # This compiler won't grok `-c -o', but also, the minuso test has
+      # not run yet.  These depmodes are late enough in the game, and
+      # so weak that their functioning should not be impacted.
+      am__obj=conftest.${OBJEXT-o}
+      am__minus_obj=
+      ;;
     none) break ;;
     esac
-    # We check with `-c' and `-o' for the sake of the "dashmstdout"
-    # mode.  It turns out that the SunPro C++ compiler does not properly
-    # handle `-M -o', and we need to detect this.
     if depmode=$depmode \
-       source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \
+       source=sub/conftest.c object=$am__obj \
        depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
-       $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \
+       $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \
          >/dev/null 2>conftest.err &&
        grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
        grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
-       grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 &&
+       grep $am__obj sub/conftest.Po > /dev/null 2>&1 &&
        ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
       # icc doesn't choke on unknown options, it will just issue warnings
       # or remarks (even with -Werror).  So we grep stderr for any message
@@ -3538,7 +3868,7 @@
 fi
 
 fi
-{ $as_echo "$as_me:$LINENO: result: $am_cv_CXX_dependencies_compiler_type" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_CXX_dependencies_compiler_type" >&5
 $as_echo "$am_cv_CXX_dependencies_compiler_type" >&6; }
 CXXDEPMODE=depmode=$am_cv_CXX_dependencies_compiler_type
 
@@ -3561,9 +3891,9 @@
 if test -n "$ac_tool_prefix"; then
   # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args.
 set dummy ${ac_tool_prefix}gcc; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 $as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_CC+set}" = set; then
+if test "${ac_cv_prog_CC+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
   if test -n "$CC"; then
@@ -3574,24 +3904,24 @@
 do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
   if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_CC="${ac_tool_prefix}gcc"
-    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
-done
+  done
 IFS=$as_save_IFS
 
 fi
 fi
 CC=$ac_cv_prog_CC
 if test -n "$CC"; then
-  { $as_echo "$as_me:$LINENO: result: $CC" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
 $as_echo "$CC" >&6; }
 else
-  { $as_echo "$as_me:$LINENO: result: no" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
 $as_echo "no" >&6; }
 fi
 
@@ -3601,9 +3931,9 @@
   ac_ct_CC=$CC
   # Extract the first word of "gcc", so it can be a program name with args.
 set dummy gcc; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 $as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
+if test "${ac_cv_prog_ac_ct_CC+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
   if test -n "$ac_ct_CC"; then
@@ -3614,24 +3944,24 @@
 do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
   if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_ac_ct_CC="gcc"
-    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
-done
+  done
 IFS=$as_save_IFS
 
 fi
 fi
 ac_ct_CC=$ac_cv_prog_ac_ct_CC
 if test -n "$ac_ct_CC"; then
-  { $as_echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5
 $as_echo "$ac_ct_CC" >&6; }
 else
-  { $as_echo "$as_me:$LINENO: result: no" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
 $as_echo "no" >&6; }
 fi
 
@@ -3640,7 +3970,7 @@
   else
     case $cross_compiling:$ac_tool_warned in
 yes:)
-{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
 ac_tool_warned=yes ;;
 esac
@@ -3654,9 +3984,9 @@
           if test -n "$ac_tool_prefix"; then
     # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args.
 set dummy ${ac_tool_prefix}cc; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 $as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_CC+set}" = set; then
+if test "${ac_cv_prog_CC+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
   if test -n "$CC"; then
@@ -3667,24 +3997,24 @@
 do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
   if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_CC="${ac_tool_prefix}cc"
-    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
-done
+  done
 IFS=$as_save_IFS
 
 fi
 fi
 CC=$ac_cv_prog_CC
 if test -n "$CC"; then
-  { $as_echo "$as_me:$LINENO: result: $CC" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
 $as_echo "$CC" >&6; }
 else
-  { $as_echo "$as_me:$LINENO: result: no" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
 $as_echo "no" >&6; }
 fi
 
@@ -3694,9 +4024,9 @@
 if test -z "$CC"; then
   # Extract the first word of "cc", so it can be a program name with args.
 set dummy cc; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 $as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_CC+set}" = set; then
+if test "${ac_cv_prog_CC+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
   if test -n "$CC"; then
@@ -3708,18 +4038,18 @@
 do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
   if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then
        ac_prog_rejected=yes
        continue
      fi
     ac_cv_prog_CC="cc"
-    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
-done
+  done
 IFS=$as_save_IFS
 
 if test $ac_prog_rejected = yes; then
@@ -3738,10 +4068,10 @@
 fi
 CC=$ac_cv_prog_CC
 if test -n "$CC"; then
-  { $as_echo "$as_me:$LINENO: result: $CC" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
 $as_echo "$CC" >&6; }
 else
-  { $as_echo "$as_me:$LINENO: result: no" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
 $as_echo "no" >&6; }
 fi
 
@@ -3753,9 +4083,9 @@
   do
     # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
 set dummy $ac_tool_prefix$ac_prog; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 $as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_CC+set}" = set; then
+if test "${ac_cv_prog_CC+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
   if test -n "$CC"; then
@@ -3766,24 +4096,24 @@
 do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
   if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_CC="$ac_tool_prefix$ac_prog"
-    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
-done
+  done
 IFS=$as_save_IFS
 
 fi
 fi
 CC=$ac_cv_prog_CC
 if test -n "$CC"; then
-  { $as_echo "$as_me:$LINENO: result: $CC" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
 $as_echo "$CC" >&6; }
 else
-  { $as_echo "$as_me:$LINENO: result: no" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
 $as_echo "no" >&6; }
 fi
 
@@ -3797,9 +4127,9 @@
 do
   # Extract the first word of "$ac_prog", so it can be a program name with args.
 set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 $as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
+if test "${ac_cv_prog_ac_ct_CC+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
   if test -n "$ac_ct_CC"; then
@@ -3810,24 +4140,24 @@
 do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
   if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_ac_ct_CC="$ac_prog"
-    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
-done
+  done
 IFS=$as_save_IFS
 
 fi
 fi
 ac_ct_CC=$ac_cv_prog_ac_ct_CC
 if test -n "$ac_ct_CC"; then
-  { $as_echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5
 $as_echo "$ac_ct_CC" >&6; }
 else
-  { $as_echo "$as_me:$LINENO: result: no" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
 $as_echo "no" >&6; }
 fi
 
@@ -3840,7 +4170,7 @@
   else
     case $cross_compiling:$ac_tool_warned in
 yes:)
-{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
 ac_tool_warned=yes ;;
 esac
@@ -3851,62 +4181,42 @@
 fi
 
 
-test -z "$CC" && { { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5
+test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-{ { $as_echo "$as_me:$LINENO: error: no acceptable C compiler found in \$PATH
-See \`config.log' for more details." >&5
-$as_echo "$as_me: error: no acceptable C compiler found in \$PATH
-See \`config.log' for more details." >&2;}
-   { (exit 1); exit 1; }; }; }
+as_fn_error "no acceptable C compiler found in \$PATH
+See \`config.log' for more details." "$LINENO" 5; }
 
 # Provide some information about the compiler.
-$as_echo "$as_me:$LINENO: checking for C compiler version" >&5
+$as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5
 set X $ac_compile
 ac_compiler=$2
-{ (ac_try="$ac_compiler --version >&5"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_compiler --version >&5") 2>&5
-  ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }
-{ (ac_try="$ac_compiler -v >&5"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_compiler -v >&5") 2>&5
-  ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }
-{ (ac_try="$ac_compiler -V >&5"
+for ac_option in --version -v -V -qversion; do
+  { { ac_try="$ac_compiler $ac_option >&5"
 case "(($ac_try" in
   *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
   *) ac_try_echo=$ac_try;;
 esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_compiler -V >&5") 2>&5
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_compiler $ac_option >&5") 2>conftest.err
   ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }
+  if test -s conftest.err; then
+    sed '10a\
+... rest of stderr output deleted ...
+         10q' conftest.err >conftest.er1
+    cat conftest.er1 >&5
+    rm -f conftest.er1 conftest.err
+  fi
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }
+done
 
-{ $as_echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C compiler" >&5
 $as_echo_n "checking whether we are using the GNU C compiler... " >&6; }
-if test "${ac_cv_c_compiler_gnu+set}" = set; then
+if test "${ac_cv_c_compiler_gnu+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 
 int
@@ -3920,37 +4230,16 @@
   return 0;
 }
 _ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_compile") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest.$ac_objext; then
+if ac_fn_c_try_compile "$LINENO"; then :
   ac_compiler_gnu=yes
 else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-	ac_compiler_gnu=no
+  ac_compiler_gnu=no
 fi
-
 rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
 ac_cv_c_compiler_gnu=$ac_compiler_gnu
 
 fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_compiler_gnu" >&5
 $as_echo "$ac_cv_c_compiler_gnu" >&6; }
 if test $ac_compiler_gnu = yes; then
   GCC=yes
@@ -3959,20 +4248,16 @@
 fi
 ac_test_CFLAGS=${CFLAGS+set}
 ac_save_CFLAGS=$CFLAGS
-{ $as_echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5
 $as_echo_n "checking whether $CC accepts -g... " >&6; }
-if test "${ac_cv_prog_cc_g+set}" = set; then
+if test "${ac_cv_prog_cc_g+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
   ac_save_c_werror_flag=$ac_c_werror_flag
    ac_c_werror_flag=yes
    ac_cv_prog_cc_g=no
    CFLAGS="-g"
-   cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+   cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 
 int
@@ -3983,35 +4268,11 @@
   return 0;
 }
 _ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_compile") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest.$ac_objext; then
+if ac_fn_c_try_compile "$LINENO"; then :
   ac_cv_prog_cc_g=yes
 else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-	CFLAGS=""
-      cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+  CFLAGS=""
+      cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 
 int
@@ -4022,36 +4283,12 @@
   return 0;
 }
 _ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_compile") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest.$ac_objext; then
-  :
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
+if ac_fn_c_try_compile "$LINENO"; then :
 
-	ac_c_werror_flag=$ac_save_c_werror_flag
+else
+  ac_c_werror_flag=$ac_save_c_werror_flag
 	 CFLAGS="-g"
-	 cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+	 cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 
 int
@@ -4062,42 +4299,17 @@
   return 0;
 }
 _ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_compile") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest.$ac_objext; then
+if ac_fn_c_try_compile "$LINENO"; then :
   ac_cv_prog_cc_g=yes
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-
 fi
-
 rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
 fi
-
 rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
 fi
-
 rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
    ac_c_werror_flag=$ac_save_c_werror_flag
 fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_g" >&5
 $as_echo "$ac_cv_prog_cc_g" >&6; }
 if test "$ac_test_CFLAGS" = set; then
   CFLAGS=$ac_save_CFLAGS
@@ -4114,18 +4326,14 @@
     CFLAGS=
   fi
 fi
-{ $as_echo "$as_me:$LINENO: checking for $CC option to accept ISO C89" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5
 $as_echo_n "checking for $CC option to accept ISO C89... " >&6; }
-if test "${ac_cv_prog_cc_c89+set}" = set; then
+if test "${ac_cv_prog_cc_c89+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
   ac_cv_prog_cc_c89=no
 ac_save_CC=$CC
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 #include <stdarg.h>
 #include <stdio.h>
@@ -4182,32 +4390,9 @@
 	-Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
 do
   CC="$ac_save_CC $ac_arg"
-  rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_compile") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest.$ac_objext; then
+  if ac_fn_c_try_compile "$LINENO"; then :
   ac_cv_prog_cc_c89=$ac_arg
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-
 fi
-
 rm -f core conftest.err conftest.$ac_objext
   test "x$ac_cv_prog_cc_c89" != "xno" && break
 done
@@ -4218,17 +4403,19 @@
 # AC_CACHE_VAL
 case "x$ac_cv_prog_cc_c89" in
   x)
-    { $as_echo "$as_me:$LINENO: result: none needed" >&5
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5
 $as_echo "none needed" >&6; } ;;
   xno)
-    { $as_echo "$as_me:$LINENO: result: unsupported" >&5
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5
 $as_echo "unsupported" >&6; } ;;
   *)
     CC="$CC $ac_cv_prog_cc_c89"
-    { $as_echo "$as_me:$LINENO: result: $ac_cv_prog_cc_c89" >&5
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5
 $as_echo "$ac_cv_prog_cc_c89" >&6; } ;;
 esac
+if test "x$ac_cv_prog_cc_c89" != xno; then :
 
+fi
 
 ac_ext=c
 ac_cpp='$CPP $CPPFLAGS'
@@ -4238,9 +4425,9 @@
 
 depcc="$CC"   am_compiler_list=
 
-{ $as_echo "$as_me:$LINENO: checking dependency style of $depcc" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5
 $as_echo_n "checking dependency style of $depcc... " >&6; }
-if test "${am_cv_CC_dependencies_compiler_type+set}" = set; then
+if test "${am_cv_CC_dependencies_compiler_type+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
   if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
@@ -4266,6 +4453,11 @@
   if test "$am_compiler_list" = ""; then
      am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp`
   fi
+  am__universal=false
+  case " $depcc " in #(
+     *\ -arch\ *\ -arch\ *) am__universal=true ;;
+     esac
+
   for depmode in $am_compiler_list; do
     # Setup a source with many dependencies, because some compilers
     # like to wrap large dependency lists on column 80 (with \), and
@@ -4283,7 +4475,17 @@
     done
     echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
 
+    # We check with `-c' and `-o' for the sake of the "dashmstdout"
+    # mode.  It turns out that the SunPro C++ compiler does not properly
+    # handle `-M -o', and we need to detect this.  Also, some Intel
+    # versions had trouble with output in subdirs
+    am__obj=sub/conftest.${OBJEXT-o}
+    am__minus_obj="-o $am__obj"
     case $depmode in
+    gcc)
+      # This depmode causes a compiler race in universal mode.
+      test "$am__universal" = false || continue
+      ;;
     nosideeffect)
       # after this tag, mechanisms are not by side-effect, so they'll
       # only be used when explicitly requested
@@ -4293,19 +4495,23 @@
 	break
       fi
       ;;
+    msvisualcpp | msvcmsys)
+      # This compiler won't grok `-c -o', but also, the minuso test has
+      # not run yet.  These depmodes are late enough in the game, and
+      # so weak that their functioning should not be impacted.
+      am__obj=conftest.${OBJEXT-o}
+      am__minus_obj=
+      ;;
     none) break ;;
     esac
-    # We check with `-c' and `-o' for the sake of the "dashmstdout"
-    # mode.  It turns out that the SunPro C++ compiler does not properly
-    # handle `-M -o', and we need to detect this.
     if depmode=$depmode \
-       source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \
+       source=sub/conftest.c object=$am__obj \
        depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
-       $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \
+       $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \
          >/dev/null 2>conftest.err &&
        grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
        grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
-       grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 &&
+       grep $am__obj sub/conftest.Po > /dev/null 2>&1 &&
        ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
       # icc doesn't choke on unknown options, it will just issue warnings
       # or remarks (even with -Werror).  So we grep stderr for any message
@@ -4329,7 +4535,7 @@
 fi
 
 fi
-{ $as_echo "$as_me:$LINENO: result: $am_cv_CC_dependencies_compiler_type" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_CC_dependencies_compiler_type" >&5
 $as_echo "$am_cv_CC_dependencies_compiler_type" >&6; }
 CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type
 
@@ -4345,22 +4551,18 @@
 
 
 if test "x$CC" != xcc; then
-  { $as_echo "$as_me:$LINENO: checking whether $CC and cc understand -c and -o together" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC and cc understand -c and -o together" >&5
 $as_echo_n "checking whether $CC and cc understand -c and -o together... " >&6; }
 else
-  { $as_echo "$as_me:$LINENO: checking whether cc understands -c and -o together" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether cc understands -c and -o together" >&5
 $as_echo_n "checking whether cc understands -c and -o together... " >&6; }
 fi
 set dummy $CC; ac_cc=`$as_echo "$2" |
 		      sed 's/[^a-zA-Z0-9_]/_/g;s/^[0-9]/_/'`
-if { as_var=ac_cv_prog_cc_${ac_cc}_c_o; eval "test \"\${$as_var+set}\" = set"; }; then
+if { as_var=ac_cv_prog_cc_${ac_cc}_c_o; eval "test \"\${$as_var+set}\" = set"; }; then :
   $as_echo_n "(cached) " >&6
 else
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 
 int
@@ -4376,63 +4578,63 @@
 # existing .o file with -o, though they will create one.
 ac_try='$CC -c conftest.$ac_ext -o conftest2.$ac_objext >&5'
 rm -f conftest2.*
-if { (case "(($ac_try" in
+if { { case "(($ac_try" in
   *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
   *) ac_try_echo=$ac_try;;
 esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
   (eval "$ac_try") 2>&5
   ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-   test -f conftest2.$ac_objext && { (case "(($ac_try" in
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } &&
+   test -f conftest2.$ac_objext && { { case "(($ac_try" in
   *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
   *) ac_try_echo=$ac_try;;
 esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
   (eval "$ac_try") 2>&5
   ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); };
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; };
 then
   eval ac_cv_prog_cc_${ac_cc}_c_o=yes
   if test "x$CC" != xcc; then
     # Test first that cc exists at all.
     if { ac_try='cc -c conftest.$ac_ext >&5'
-  { (case "(($ac_try" in
+  { { case "(($ac_try" in
   *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
   *) ac_try_echo=$ac_try;;
 esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
   (eval "$ac_try") 2>&5
   ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; }; then
       ac_try='cc -c conftest.$ac_ext -o conftest2.$ac_objext >&5'
       rm -f conftest2.*
-      if { (case "(($ac_try" in
+      if { { case "(($ac_try" in
   *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
   *) ac_try_echo=$ac_try;;
 esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
   (eval "$ac_try") 2>&5
   ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 test -f conftest2.$ac_objext && { (case "(($ac_try" in
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } &&
+	 test -f conftest2.$ac_objext && { { case "(($ac_try" in
   *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
   *) ac_try_echo=$ac_try;;
 esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
   (eval "$ac_try") 2>&5
   ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); };
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; };
       then
 	# cc works too.
 	:
@@ -4449,23 +4651,22 @@
 
 fi
 if eval test \$ac_cv_prog_cc_${ac_cc}_c_o = yes; then
-  { $as_echo "$as_me:$LINENO: result: yes" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
 $as_echo "yes" >&6; }
 else
-  { $as_echo "$as_me:$LINENO: result: no" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
 $as_echo "no" >&6; }
 
-cat >>confdefs.h <<\_ACEOF
-#define NO_MINUS_C_MINUS_O 1
-_ACEOF
+$as_echo "#define NO_MINUS_C_MINUS_O 1" >>confdefs.h
 
 fi
 
 # FIXME: we rely on the cache variable name because
 # there is no other way.
 set dummy $CC
-ac_cc=`echo $2 | sed 's/[^a-zA-Z0-9_]/_/g;s/^[0-9]/_/'`
-if eval "test \"`echo '$ac_cv_prog_cc_'${ac_cc}_c_o`\" != yes"; then
+am_cc=`echo $2 | sed 's/[^a-zA-Z0-9_]/_/g;s/^[0-9]/_/'`
+eval am_t=\$ac_cv_prog_cc_${am_cc}_c_o
+if test "$am_t" != yes; then
    # Losing compiler, so override with the script.
    # FIXME: It is wrong to rewrite CC.
    # But if we don't then we get into trouble of one sort or another.
@@ -4480,14 +4681,14 @@
 ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
 ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
 ac_compiler_gnu=$ac_cv_c_compiler_gnu
-{ $as_echo "$as_me:$LINENO: checking how to run the C preprocessor" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to run the C preprocessor" >&5
 $as_echo_n "checking how to run the C preprocessor... " >&6; }
 # On Suns, sometimes $CPP names a directory.
 if test -n "$CPP" && test -d "$CPP"; then
   CPP=
 fi
 if test -z "$CPP"; then
-  if test "${ac_cv_prog_CPP+set}" = set; then
+  if test "${ac_cv_prog_CPP+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
       # Double quotes because CPP needs to be expanded
@@ -4502,11 +4703,7 @@
   # <limits.h> exists even on freestanding compilers.
   # On the NeXT, cc -E runs the code through the compiler's parser,
   # not just through cpp. "Syntax error" is here to catch this case.
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 #ifdef __STDC__
 # include <limits.h>
@@ -4515,78 +4712,34 @@
 #endif
 		     Syntax error
 _ACEOF
-if { (ac_try="$ac_cpp conftest.$ac_ext"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } >/dev/null && {
-	 test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       }; then
-  :
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
+if ac_fn_c_try_cpp "$LINENO"; then :
 
+else
   # Broken: fails on valid input.
 continue
 fi
-
 rm -f conftest.err conftest.$ac_ext
 
   # OK, works on sane cases.  Now check whether nonexistent headers
   # can be detected and how.
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 #include <ac_nonexistent.h>
 _ACEOF
-if { (ac_try="$ac_cpp conftest.$ac_ext"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } >/dev/null && {
-	 test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       }; then
+if ac_fn_c_try_cpp "$LINENO"; then :
   # Broken: success on invalid input.
 continue
 else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
   # Passes both tests.
 ac_preproc_ok=:
 break
 fi
-
 rm -f conftest.err conftest.$ac_ext
 
 done
 # Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
 rm -f conftest.err conftest.$ac_ext
-if $ac_preproc_ok; then
+if $ac_preproc_ok; then :
   break
 fi
 
@@ -4598,7 +4751,7 @@
 else
   ac_cv_prog_CPP=$CPP
 fi
-{ $as_echo "$as_me:$LINENO: result: $CPP" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $CPP" >&5
 $as_echo "$CPP" >&6; }
 ac_preproc_ok=false
 for ac_c_preproc_warn_flag in '' yes
@@ -4609,11 +4762,7 @@
   # <limits.h> exists even on freestanding compilers.
   # On the NeXT, cc -E runs the code through the compiler's parser,
   # not just through cpp. "Syntax error" is here to catch this case.
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 #ifdef __STDC__
 # include <limits.h>
@@ -4622,87 +4771,40 @@
 #endif
 		     Syntax error
 _ACEOF
-if { (ac_try="$ac_cpp conftest.$ac_ext"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } >/dev/null && {
-	 test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       }; then
-  :
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
+if ac_fn_c_try_cpp "$LINENO"; then :
 
+else
   # Broken: fails on valid input.
 continue
 fi
-
 rm -f conftest.err conftest.$ac_ext
 
   # OK, works on sane cases.  Now check whether nonexistent headers
   # can be detected and how.
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 #include <ac_nonexistent.h>
 _ACEOF
-if { (ac_try="$ac_cpp conftest.$ac_ext"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } >/dev/null && {
-	 test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       }; then
+if ac_fn_c_try_cpp "$LINENO"; then :
   # Broken: success on invalid input.
 continue
 else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
   # Passes both tests.
 ac_preproc_ok=:
 break
 fi
-
 rm -f conftest.err conftest.$ac_ext
 
 done
 # Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
 rm -f conftest.err conftest.$ac_ext
-if $ac_preproc_ok; then
-  :
+if $ac_preproc_ok; then :
+
 else
-  { { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5
+  { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-{ { $as_echo "$as_me:$LINENO: error: C preprocessor \"$CPP\" fails sanity check
-See \`config.log' for more details." >&5
-$as_echo "$as_me: error: C preprocessor \"$CPP\" fails sanity check
-See \`config.log' for more details." >&2;}
-   { (exit 1); exit 1; }; }; }
+as_fn_error "C preprocessor \"$CPP\" fails sanity check
+See \`config.log' for more details." "$LINENO" 5; }
 fi
 
 ac_ext=c
@@ -4715,9 +4817,9 @@
 do
   # Extract the first word of "$ac_prog", so it can be a program name with args.
 set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 $as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_AWK+set}" = set; then
+if test "${ac_cv_prog_AWK+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
   if test -n "$AWK"; then
@@ -4728,24 +4830,24 @@
 do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
   if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_AWK="$ac_prog"
-    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
-done
+  done
 IFS=$as_save_IFS
 
 fi
 fi
 AWK=$ac_cv_prog_AWK
 if test -n "$AWK"; then
-  { $as_echo "$as_me:$LINENO: result: $AWK" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AWK" >&5
 $as_echo "$AWK" >&6; }
 else
-  { $as_echo "$as_me:$LINENO: result: no" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
 $as_echo "no" >&6; }
 fi
 
@@ -4753,154 +4855,21 @@
   test -n "$AWK" && break
 done
 
-# Find a good install program.  We prefer a C program (faster),
-# so one script is as good as another.  But avoid the broken or
-# incompatible versions:
-# SysV /etc/install, /usr/sbin/install
-# SunOS /usr/etc/install
-# IRIX /sbin/install
-# AIX /bin/install
-# AmigaOS /C/install, which installs bootblocks on floppy discs
-# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
-# AFS /usr/afsws/bin/install, which mishandles nonexistent args
-# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
-# OS/2's system install, which has a completely different semantic
-# ./install, which can be erroneously created by make from ./install.sh.
-# Reject install programs that cannot install multiple files.
-{ $as_echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5
-$as_echo_n "checking for a BSD-compatible install... " >&6; }
-if test -z "$INSTALL"; then
-if test "${ac_cv_path_install+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
-  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  # Account for people who put trailing slashes in PATH elements.
-case $as_dir/ in
-  ./ | .// | /cC/* | \
-  /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \
-  ?:\\/os2\\/install\\/* | ?:\\/OS2\\/INSTALL\\/* | \
-  /usr/ucb/* ) ;;
-  *)
-    # OSF1 and SCO ODT 3.0 have their own names for install.
-    # Don't use installbsd from OSF since it installs stuff as root
-    # by default.
-    for ac_prog in ginstall scoinst install; do
-      for ac_exec_ext in '' $ac_executable_extensions; do
-	if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; }; then
-	  if test $ac_prog = install &&
-	    grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
-	    # AIX install.  It has an incompatible calling convention.
-	    :
-	  elif test $ac_prog = install &&
-	    grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
-	    # program-specific install script used by HP pwplus--don't use.
-	    :
-	  else
-	    rm -rf conftest.one conftest.two conftest.dir
-	    echo one > conftest.one
-	    echo two > conftest.two
-	    mkdir conftest.dir
-	    if "$as_dir/$ac_prog$ac_exec_ext" -c conftest.one conftest.two "`pwd`/conftest.dir" &&
-	      test -s conftest.one && test -s conftest.two &&
-	      test -s conftest.dir/conftest.one &&
-	      test -s conftest.dir/conftest.two
-	    then
-	      ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c"
-	      break 3
-	    fi
-	  fi
-	fi
-      done
-    done
-    ;;
-esac
-
-done
-IFS=$as_save_IFS
-
-rm -rf conftest.one conftest.two conftest.dir
-
-fi
-  if test "${ac_cv_path_install+set}" = set; then
-    INSTALL=$ac_cv_path_install
-  else
-    # As a last resort, use the slow shell script.  Don't cache a
-    # value for INSTALL within a source directory, because that will
-    # break other packages using the cache if that directory is
-    # removed, or if the value is a relative name.
-    INSTALL=$ac_install_sh
-  fi
-fi
-{ $as_echo "$as_me:$LINENO: result: $INSTALL" >&5
-$as_echo "$INSTALL" >&6; }
-
-# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
-# It thinks the first close brace ends the variable substitution.
-test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-
-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}'
-
-test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
 
-{ $as_echo "$as_me:$LINENO: checking whether ln -s works" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ln -s works" >&5
 $as_echo_n "checking whether ln -s works... " >&6; }
 LN_S=$as_ln_s
 if test "$LN_S" = "ln -s"; then
-  { $as_echo "$as_me:$LINENO: result: yes" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
 $as_echo "yes" >&6; }
 else
-  { $as_echo "$as_me:$LINENO: result: no, using $LN_S" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no, using $LN_S" >&5
 $as_echo "no, using $LN_S" >&6; }
 fi
 
-{ $as_echo "$as_me:$LINENO: checking for a thread-safe mkdir -p" >&5
-$as_echo_n "checking for a thread-safe mkdir -p... " >&6; }
-if test -z "$MKDIR_P"; then
-  if test "${ac_cv_path_mkdir+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
-  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH$PATH_SEPARATOR/opt/sfw/bin
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_prog in mkdir gmkdir; do
-	 for ac_exec_ext in '' $ac_executable_extensions; do
-	   { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; } || continue
-	   case `"$as_dir/$ac_prog$ac_exec_ext" --version 2>&1` in #(
-	     'mkdir (GNU coreutils) '* | \
-	     'mkdir (coreutils) '* | \
-	     'mkdir (fileutils) '4.1*)
-	       ac_cv_path_mkdir=$as_dir/$ac_prog$ac_exec_ext
-	       break 3;;
-	   esac
-	 done
-       done
-done
-IFS=$as_save_IFS
-
-fi
-
-  if test "${ac_cv_path_mkdir+set}" = set; then
-    MKDIR_P="$ac_cv_path_mkdir -p"
-  else
-    # As a last resort, use the slow shell script.  Don't cache a
-    # value for MKDIR_P within a source directory, because that will
-    # break other packages using the cache if that directory is
-    # removed, or if the value is a relative name.
-    test -d ./--version && rmdir ./--version
-    MKDIR_P="$ac_install_sh -d"
-  fi
-fi
-{ $as_echo "$as_me:$LINENO: result: $MKDIR_P" >&5
-$as_echo "$MKDIR_P" >&6; }
 
 # Check whether --enable-shared was given.
-if test "${enable_shared+set}" = set; then
+if test "${enable_shared+set}" = set; then :
   enableval=$enable_shared; p=${PACKAGE-default}
     case $enableval in
     yes) enable_shared=yes ;;
@@ -4926,2459 +4895,1482 @@
 
 
 
-# Check whether --enable-static was given.
-if test "${enable_static+set}" = set; then
-  enableval=$enable_static; p=${PACKAGE-default}
-    case $enableval in
-    yes) enable_static=yes ;;
-    no) enable_static=no ;;
-    *)
-     enable_static=no
-      # Look at the argument we got.  We use all the common list separators.
-      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
-      for pkg in $enableval; do
-	IFS="$lt_save_ifs"
-	if test "X$pkg" = "X$p"; then
-	  enable_static=yes
-	fi
-      done
-      IFS="$lt_save_ifs"
-      ;;
-    esac
-else
-  enable_static=yes
-fi
 
 
-# Check whether --enable-fast-install was given.
-if test "${enable_fast_install+set}" = set; then
-  enableval=$enable_fast_install; p=${PACKAGE-default}
-    case $enableval in
-    yes) enable_fast_install=yes ;;
-    no) enable_fast_install=no ;;
-    *)
-      enable_fast_install=no
-      # Look at the argument we got.  We use all the common list separators.
-      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
-      for pkg in $enableval; do
-	IFS="$lt_save_ifs"
-	if test "X$pkg" = "X$p"; then
-	  enable_fast_install=yes
-	fi
-      done
-      IFS="$lt_save_ifs"
-      ;;
-    esac
-else
-  enable_fast_install=yes
-fi
 
 
-{ $as_echo "$as_me:$LINENO: checking for a sed that does not truncate output" >&5
-$as_echo_n "checking for a sed that does not truncate output... " >&6; }
-if test "${lt_cv_path_SED+set}" = set; then
+enable_win32_dll=yes
+
+case $host in
+*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-cegcc*)
+  if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args.
+set dummy ${ac_tool_prefix}as; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_AS+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
-  # Loop through the user's path and test for sed and gsed.
-# Then use that list of sed's as ones to test for truncation.
+  if test -n "$AS"; then
+  ac_cv_prog_AS="$AS" # Let the user override the test.
+else
 as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
 for as_dir in $PATH
 do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
-  for lt_ac_prog in sed gsed; do
     for ac_exec_ext in '' $ac_executable_extensions; do
-      if { test -f "$as_dir/$lt_ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$lt_ac_prog$ac_exec_ext"; }; then
-        lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext"
-      fi
-    done
-  done
-done
-IFS=$as_save_IFS
-lt_ac_max=0
-lt_ac_count=0
-# Add /usr/xpg4/bin/sed as it is typically found on Solaris
-# along with /bin/sed that truncates output.
-for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do
-  test ! -f $lt_ac_sed && continue
-  cat /dev/null > conftest.in
-  lt_ac_count=0
-  echo $ECHO_N "0123456789$ECHO_C" >conftest.in
-  # Check for GNU sed and select it if it is found.
-  if "$lt_ac_sed" --version 2>&1 < /dev/null | grep 'GNU' > /dev/null; then
-    lt_cv_path_SED=$lt_ac_sed
-    break
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_AS="${ac_tool_prefix}as"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
   fi
-  while true; do
-    cat conftest.in conftest.in >conftest.tmp
-    mv conftest.tmp conftest.in
-    cp conftest.in conftest.nl
-    echo >>conftest.nl
-    $lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break
-    cmp -s conftest.out conftest.nl || break
-    # 10000 chars as input seems more than enough
-    test $lt_ac_count -gt 10 && break
-    lt_ac_count=`expr $lt_ac_count + 1`
-    if test $lt_ac_count -gt $lt_ac_max; then
-      lt_ac_max=$lt_ac_count
-      lt_cv_path_SED=$lt_ac_sed
-    fi
-  done
 done
+  done
+IFS=$as_save_IFS
 
 fi
+fi
+AS=$ac_cv_prog_AS
+if test -n "$AS"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AS" >&5
+$as_echo "$AS" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
 
-SED=$lt_cv_path_SED
-
-{ $as_echo "$as_me:$LINENO: result: $SED" >&5
-$as_echo "$SED" >&6; }
 
-{ $as_echo "$as_me:$LINENO: checking for grep that handles long lines and -e" >&5
-$as_echo_n "checking for grep that handles long lines and -e... " >&6; }
-if test "${ac_cv_path_GREP+set}" = set; then
+fi
+if test -z "$ac_cv_prog_AS"; then
+  ac_ct_AS=$AS
+  # Extract the first word of "as", so it can be a program name with args.
+set dummy as; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_ac_ct_AS+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
-  if test -z "$GREP"; then
-  ac_path_GREP_found=false
-  # Loop through the user's path and test for each of PROGNAME-LIST
-  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
+  if test -n "$ac_ct_AS"; then
+  ac_cv_prog_ac_ct_AS="$ac_ct_AS" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
 do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
-  for ac_prog in grep ggrep; do
     for ac_exec_ext in '' $ac_executable_extensions; do
-      ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext"
-      { test -f "$ac_path_GREP" && $as_test_x "$ac_path_GREP"; } || continue
-# Check for GNU ac_path_GREP and select it if it is found.
-  # Check for GNU $ac_path_GREP
-case `"$ac_path_GREP" --version 2>&1` in
-*GNU*)
-  ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;;
-*)
-  ac_count=0
-  $as_echo_n 0123456789 >"conftest.in"
-  while :
-  do
-    cat "conftest.in" "conftest.in" >"conftest.tmp"
-    mv "conftest.tmp" "conftest.in"
-    cp "conftest.in" "conftest.nl"
-    $as_echo 'GREP' >> "conftest.nl"
-    "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break
-    diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
-    ac_count=`expr $ac_count + 1`
-    if test $ac_count -gt ${ac_path_GREP_max-0}; then
-      # Best one so far, save it but keep looking for a better one
-      ac_cv_path_GREP="$ac_path_GREP"
-      ac_path_GREP_max=$ac_count
-    fi
-    # 10*(2^10) chars as input seems more than enough
-    test $ac_count -gt 10 && break
-  done
-  rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
-esac
-
-      $ac_path_GREP_found && break 3
-    done
-  done
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_AS="as"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
 done
+  done
 IFS=$as_save_IFS
-  if test -z "$ac_cv_path_GREP"; then
-    { { $as_echo "$as_me:$LINENO: error: no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5
-$as_echo "$as_me: error: no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;}
-   { (exit 1); exit 1; }; }
-  fi
+
+fi
+fi
+ac_ct_AS=$ac_cv_prog_ac_ct_AS
+if test -n "$ac_ct_AS"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_AS" >&5
+$as_echo "$ac_ct_AS" >&6; }
 else
-  ac_cv_path_GREP=$GREP
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
 fi
 
+  if test "x$ac_ct_AS" = x; then
+    AS="false"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    AS=$ac_ct_AS
+  fi
+else
+  AS="$ac_cv_prog_AS"
 fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_path_GREP" >&5
-$as_echo "$ac_cv_path_GREP" >&6; }
- GREP="$ac_cv_path_GREP"
-
 
-{ $as_echo "$as_me:$LINENO: checking for egrep" >&5
-$as_echo_n "checking for egrep... " >&6; }
-if test "${ac_cv_path_EGREP+set}" = set; then
+  if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}dlltool", so it can be a program name with args.
+set dummy ${ac_tool_prefix}dlltool; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_DLLTOOL+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
-  if echo a | $GREP -E '(a|b)' >/dev/null 2>&1
-   then ac_cv_path_EGREP="$GREP -E"
-   else
-     if test -z "$EGREP"; then
-  ac_path_EGREP_found=false
-  # Loop through the user's path and test for each of PROGNAME-LIST
-  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
+  if test -n "$DLLTOOL"; then
+  ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
 do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
-  for ac_prog in egrep; do
     for ac_exec_ext in '' $ac_executable_extensions; do
-      ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext"
-      { test -f "$ac_path_EGREP" && $as_test_x "$ac_path_EGREP"; } || continue
-# Check for GNU ac_path_EGREP and select it if it is found.
-  # Check for GNU $ac_path_EGREP
-case `"$ac_path_EGREP" --version 2>&1` in
-*GNU*)
-  ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;;
-*)
-  ac_count=0
-  $as_echo_n 0123456789 >"conftest.in"
-  while :
-  do
-    cat "conftest.in" "conftest.in" >"conftest.tmp"
-    mv "conftest.tmp" "conftest.in"
-    cp "conftest.in" "conftest.nl"
-    $as_echo 'EGREP' >> "conftest.nl"
-    "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break
-    diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
-    ac_count=`expr $ac_count + 1`
-    if test $ac_count -gt ${ac_path_EGREP_max-0}; then
-      # Best one so far, save it but keep looking for a better one
-      ac_cv_path_EGREP="$ac_path_EGREP"
-      ac_path_EGREP_max=$ac_count
-    fi
-    # 10*(2^10) chars as input seems more than enough
-    test $ac_count -gt 10 && break
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_DLLTOOL="${ac_tool_prefix}dlltool"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
   done
-  rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
-esac
+IFS=$as_save_IFS
 
-      $ac_path_EGREP_found && break 3
-    done
-  done
+fi
+fi
+DLLTOOL=$ac_cv_prog_DLLTOOL
+if test -n "$DLLTOOL"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DLLTOOL" >&5
+$as_echo "$DLLTOOL" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_DLLTOOL"; then
+  ac_ct_DLLTOOL=$DLLTOOL
+  # Extract the first word of "dlltool", so it can be a program name with args.
+set dummy dlltool; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_ac_ct_DLLTOOL+set}" = set; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_DLLTOOL"; then
+  ac_cv_prog_ac_ct_DLLTOOL="$ac_ct_DLLTOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_DLLTOOL="dlltool"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
 done
+  done
 IFS=$as_save_IFS
-  if test -z "$ac_cv_path_EGREP"; then
-    { { $as_echo "$as_me:$LINENO: error: no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5
-$as_echo "$as_me: error: no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;}
-   { (exit 1); exit 1; }; }
-  fi
+
+fi
+fi
+ac_ct_DLLTOOL=$ac_cv_prog_ac_ct_DLLTOOL
+if test -n "$ac_ct_DLLTOOL"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DLLTOOL" >&5
+$as_echo "$ac_ct_DLLTOOL" >&6; }
 else
-  ac_cv_path_EGREP=$EGREP
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
 fi
 
-   fi
+  if test "x$ac_ct_DLLTOOL" = x; then
+    DLLTOOL="false"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    DLLTOOL=$ac_ct_DLLTOOL
+  fi
+else
+  DLLTOOL="$ac_cv_prog_DLLTOOL"
 fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_path_EGREP" >&5
-$as_echo "$ac_cv_path_EGREP" >&6; }
- EGREP="$ac_cv_path_EGREP"
-
 
+  if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}objdump", so it can be a program name with args.
+set dummy ${ac_tool_prefix}objdump; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_OBJDUMP+set}" = set; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$OBJDUMP"; then
+  ac_cv_prog_OBJDUMP="$OBJDUMP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_OBJDUMP="${ac_tool_prefix}objdump"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
 
-# Check whether --with-gnu-ld was given.
-if test "${with_gnu_ld+set}" = set; then
-  withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes
+fi
+fi
+OBJDUMP=$ac_cv_prog_OBJDUMP
+if test -n "$OBJDUMP"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OBJDUMP" >&5
+$as_echo "$OBJDUMP" >&6; }
 else
-  with_gnu_ld=no
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
 fi
 
-ac_prog=ld
-if test "$GCC" = yes; then
-  # Check if gcc -print-prog-name=ld gives a path.
-  { $as_echo "$as_me:$LINENO: checking for ld used by $CC" >&5
-$as_echo_n "checking for ld used by $CC... " >&6; }
-  case $host in
-  *-*-mingw*)
-    # gcc leaves a trailing carriage return which upsets mingw
-    ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
-  *)
-    ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
-  esac
-  case $ac_prog in
-    # Accept absolute paths.
-    [\\/]* | ?:[\\/]*)
-      re_direlt='/[^/][^/]*/\.\./'
-      # Canonicalize the pathname of ld
-      ac_prog=`echo $ac_prog| $SED 's%\\\\%/%g'`
-      while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
-	ac_prog=`echo $ac_prog| $SED "s%$re_direlt%/%"`
-      done
-      test -z "$LD" && LD="$ac_prog"
-      ;;
-  "")
-    # If it fails, then pretend we aren't using GCC.
-    ac_prog=ld
-    ;;
-  *)
-    # If it is relative, then search for the first ld in PATH.
-    with_gnu_ld=unknown
-    ;;
-  esac
-elif test "$with_gnu_ld" = yes; then
-  { $as_echo "$as_me:$LINENO: checking for GNU ld" >&5
-$as_echo_n "checking for GNU ld... " >&6; }
-else
-  { $as_echo "$as_me:$LINENO: checking for non-GNU ld" >&5
-$as_echo_n "checking for non-GNU ld... " >&6; }
+
 fi
-if test "${lt_cv_path_LD+set}" = set; then
+if test -z "$ac_cv_prog_OBJDUMP"; then
+  ac_ct_OBJDUMP=$OBJDUMP
+  # Extract the first word of "objdump", so it can be a program name with args.
+set dummy objdump; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_ac_ct_OBJDUMP+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
-  if test -z "$LD"; then
-  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-  for ac_dir in $PATH; do
-    IFS="$lt_save_ifs"
-    test -z "$ac_dir" && ac_dir=.
-    if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
-      lt_cv_path_LD="$ac_dir/$ac_prog"
-      # Check to see if the program is GNU ld.  I'd rather use --version,
-      # but apparently some variants of GNU ld only accept -v.
-      # Break only if it was the GNU/non-GNU ld that we prefer.
-      case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
-      *GNU* | *'with BFD'*)
-	test "$with_gnu_ld" != no && break
-	;;
-      *)
-	test "$with_gnu_ld" != yes && break
-	;;
-      esac
-    fi
-  done
-  IFS="$lt_save_ifs"
+  if test -n "$ac_ct_OBJDUMP"; then
+  ac_cv_prog_ac_ct_OBJDUMP="$ac_ct_OBJDUMP" # Let the user override the test.
 else
-  lt_cv_path_LD="$LD" # Let the user override the test with a path.
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_OBJDUMP="objdump"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
 fi
 fi
-
-LD="$lt_cv_path_LD"
-if test -n "$LD"; then
-  { $as_echo "$as_me:$LINENO: result: $LD" >&5
-$as_echo "$LD" >&6; }
+ac_ct_OBJDUMP=$ac_cv_prog_ac_ct_OBJDUMP
+if test -n "$ac_ct_OBJDUMP"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OBJDUMP" >&5
+$as_echo "$ac_ct_OBJDUMP" >&6; }
 else
-  { $as_echo "$as_me:$LINENO: result: no" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
 $as_echo "no" >&6; }
 fi
-test -z "$LD" && { { $as_echo "$as_me:$LINENO: error: no acceptable ld found in \$PATH" >&5
-$as_echo "$as_me: error: no acceptable ld found in \$PATH" >&2;}
-   { (exit 1); exit 1; }; }
-{ $as_echo "$as_me:$LINENO: checking if the linker ($LD) is GNU ld" >&5
-$as_echo_n "checking if the linker ($LD) is GNU ld... " >&6; }
-if test "${lt_cv_prog_gnu_ld+set}" = set; then
-  $as_echo_n "(cached) " >&6
+
+  if test "x$ac_ct_OBJDUMP" = x; then
+    OBJDUMP="false"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    OBJDUMP=$ac_ct_OBJDUMP
+  fi
 else
-  # I'd rather use --version here, but apparently some GNU lds only accept -v.
-case `$LD -v 2>&1 </dev/null` in
-*GNU* | *'with BFD'*)
-  lt_cv_prog_gnu_ld=yes
-  ;;
-*)
-  lt_cv_prog_gnu_ld=no
+  OBJDUMP="$ac_cv_prog_OBJDUMP"
+fi
+
   ;;
 esac
-fi
-{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_gnu_ld" >&5
-$as_echo "$lt_cv_prog_gnu_ld" >&6; }
-with_gnu_ld=$lt_cv_prog_gnu_ld
 
+test -z "$AS" && AS=as
 
-{ $as_echo "$as_me:$LINENO: checking for $LD option to reload object files" >&5
-$as_echo_n "checking for $LD option to reload object files... " >&6; }
-if test "${lt_cv_ld_reload_flag+set}" = set; then
+
+
+
+
+test -z "$DLLTOOL" && DLLTOOL=dlltool
+
+
+
+
+
+test -z "$OBJDUMP" && OBJDUMP=objdump
+
+
+
+
+
+
+
+case `pwd` in
+  *\ * | *\	*)
+    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&5
+$as_echo "$as_me: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&2;} ;;
+esac
+
+
+
+macro_version='2.2.6'
+macro_revision='1.3012'
+
+
+
+
+
+
+
+
+
+
+
+
+
+ltmain="$ac_aux_dir/ltmain.sh"
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a sed that does not truncate output" >&5
+$as_echo_n "checking for a sed that does not truncate output... " >&6; }
+if test "${ac_cv_path_SED+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
-  lt_cv_ld_reload_flag='-r'
-fi
-{ $as_echo "$as_me:$LINENO: result: $lt_cv_ld_reload_flag" >&5
-$as_echo "$lt_cv_ld_reload_flag" >&6; }
-reload_flag=$lt_cv_ld_reload_flag
-case $reload_flag in
-"" | " "*) ;;
-*) reload_flag=" $reload_flag" ;;
-esac
-reload_cmds='$LD$reload_flag -o $output$reload_objs'
-case $host_os in
-  darwin*)
-    if test "$GCC" = yes; then
-      reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs'
-    else
-      reload_cmds='$LD$reload_flag -o $output$reload_objs'
+            ac_script=s/aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa/bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb/
+     for ac_i in 1 2 3 4 5 6 7; do
+       ac_script="$ac_script$as_nl$ac_script"
+     done
+     echo "$ac_script" 2>/dev/null | sed 99q >conftest.sed
+     { ac_script=; unset ac_script;}
+     if test -z "$SED"; then
+  ac_path_SED_found=false
+  # Loop through the user's path and test for each of PROGNAME-LIST
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_prog in sed gsed; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
+      ac_path_SED="$as_dir/$ac_prog$ac_exec_ext"
+      { test -f "$ac_path_SED" && $as_test_x "$ac_path_SED"; } || continue
+# Check for GNU ac_path_SED and select it if it is found.
+  # Check for GNU $ac_path_SED
+case `"$ac_path_SED" --version 2>&1` in
+*GNU*)
+  ac_cv_path_SED="$ac_path_SED" ac_path_SED_found=:;;
+*)
+  ac_count=0
+  $as_echo_n 0123456789 >"conftest.in"
+  while :
+  do
+    cat "conftest.in" "conftest.in" >"conftest.tmp"
+    mv "conftest.tmp" "conftest.in"
+    cp "conftest.in" "conftest.nl"
+    $as_echo '' >> "conftest.nl"
+    "$ac_path_SED" -f conftest.sed < "conftest.nl" >"conftest.out" 2>/dev/null || break
+    diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
+    as_fn_arith $ac_count + 1 && ac_count=$as_val
+    if test $ac_count -gt ${ac_path_SED_max-0}; then
+      # Best one so far, save it but keep looking for a better one
+      ac_cv_path_SED="$ac_path_SED"
+      ac_path_SED_max=$ac_count
     fi
-    ;;
+    # 10*(2^10) chars as input seems more than enough
+    test $ac_count -gt 10 && break
+  done
+  rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
 esac
 
-{ $as_echo "$as_me:$LINENO: checking for BSD-compatible nm" >&5
-$as_echo_n "checking for BSD-compatible nm... " >&6; }
-if test "${lt_cv_path_NM+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$NM"; then
-  # Let the user override the test.
-  lt_cv_path_NM="$NM"
-else
-  lt_nm_to_check="${ac_tool_prefix}nm"
-  if test -n "$ac_tool_prefix" && test "$build" = "$host"; then
-    lt_nm_to_check="$lt_nm_to_check nm"
-  fi
-  for lt_tmp_nm in $lt_nm_to_check; do
-    lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-    for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do
-      IFS="$lt_save_ifs"
-      test -z "$ac_dir" && ac_dir=.
-      tmp_nm="$ac_dir/$lt_tmp_nm"
-      if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then
-	# Check to see if the nm accepts a BSD-compat flag.
-	# Adding the `sed 1q' prevents false positives on HP-UX, which says:
-	#   nm: unknown option "B" ignored
-	# Tru64's nm complains that /dev/null is an invalid object file
-	case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in
-	*/dev/null* | *'Invalid file or object type'*)
-	  lt_cv_path_NM="$tmp_nm -B"
-	  break
-	  ;;
-	*)
-	  case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in
-	  */dev/null*)
-	    lt_cv_path_NM="$tmp_nm -p"
-	    break
-	    ;;
-	  *)
-	    lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
-	    continue # so that we can try to find one that supports BSD flags
-	    ;;
-	  esac
-	  ;;
-	esac
-      fi
+      $ac_path_SED_found && break 3
     done
-    IFS="$lt_save_ifs"
   done
-  test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm
+  done
+IFS=$as_save_IFS
+  if test -z "$ac_cv_path_SED"; then
+    as_fn_error "no acceptable sed could be found in \$PATH" "$LINENO" 5
+  fi
+else
+  ac_cv_path_SED=$SED
 fi
+
 fi
-{ $as_echo "$as_me:$LINENO: result: $lt_cv_path_NM" >&5
-$as_echo "$lt_cv_path_NM" >&6; }
-NM="$lt_cv_path_NM"
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_SED" >&5
+$as_echo "$ac_cv_path_SED" >&6; }
+ SED="$ac_cv_path_SED"
+  rm -f conftest.sed
 
-{ $as_echo "$as_me:$LINENO: checking how to recognize dependent libraries" >&5
-$as_echo_n "checking how to recognize dependent libraries... " >&6; }
-if test "${lt_cv_deplibs_check_method+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
-  lt_cv_file_magic_cmd='$MAGIC_CMD'
-lt_cv_file_magic_test_file=
-lt_cv_deplibs_check_method='unknown'
-# Need to set the preceding variable on all platforms that support
-# interlibrary dependencies.
-# 'none' -- dependencies not supported.
-# `unknown' -- same as none, but documents that we really don't know.
-# 'pass_all' -- all dependencies passed with no checks.
-# 'test_compile' -- check by making test program.
-# 'file_magic [[regex]]' -- check by looking for files in library path
-# which responds to the $file_magic_cmd with a given extended regex.
-# If you have `file' or equivalent on your system and you're not sure
-# whether `pass_all' will *always* work, you probably want this one.
+test -z "$SED" && SED=sed
+Xsed="$SED -e 1s/^X//"
 
-case $host_os in
-aix[4-9]*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
 
-beos*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-bsdi[45]*)
-  lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)'
-  lt_cv_file_magic_cmd='/usr/bin/file -L'
-  lt_cv_file_magic_test_file=/shlib/libc.so
-  ;;
-
-cygwin*)
-  # func_win32_libid is a shell function defined in ltmain.sh
-  lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
-  lt_cv_file_magic_cmd='func_win32_libid'
-  ;;
-
-mingw* | pw32*)
-  # Base MSYS/MinGW do not provide the 'file' command needed by
-  # func_win32_libid shell function, so use a weaker test based on 'objdump',
-  # unless we find 'file', for example because we are cross-compiling.
-  if ( file / ) >/dev/null 2>&1; then
-    lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
-    lt_cv_file_magic_cmd='func_win32_libid'
-  else
-    lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
-    lt_cv_file_magic_cmd='$OBJDUMP -f'
-  fi
-  ;;
-
-darwin* | rhapsody*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
 
-freebsd* | dragonfly*)
-  if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
-    case $host_cpu in
-    i*86 )
-      # Not sure whether the presence of OpenBSD here was a mistake.
-      # Let's accept both of them until this is cleared up.
-      lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[3-9]86 (compact )?demand paged shared library'
-      lt_cv_file_magic_cmd=/usr/bin/file
-      lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
-      ;;
-    esac
-  else
-    lt_cv_deplibs_check_method=pass_all
-  fi
-  ;;
 
-gnu*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
 
-hpux10.20* | hpux11*)
-  lt_cv_file_magic_cmd=/usr/bin/file
-  case $host_cpu in
-  ia64*)
-    lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - IA64'
-    lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
-    ;;
-  hppa*64*)
-    lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - PA-RISC [0-9].[0-9]'
-    lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl
-    ;;
-  *)
-    lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9].[0-9]) shared library'
-    lt_cv_file_magic_test_file=/usr/lib/libc.sl
-    ;;
-  esac
-  ;;
 
-interix[3-9]*)
-  # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here
-  lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|\.a)$'
-  ;;
 
-irix5* | irix6* | nonstopux*)
-  case $LD in
-  *-32|*"-32 ") libmagic=32-bit;;
-  *-n32|*"-n32 ") libmagic=N32;;
-  *-64|*"-64 ") libmagic=64-bit;;
-  *) libmagic=never-match;;
-  esac
-  lt_cv_deplibs_check_method=pass_all
-  ;;
 
-# This must be Linux ELF.
-linux* | k*bsd*-gnu)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
 
-netbsd*)
-  if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
-    lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$'
-  else
-    lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|_pic\.a)$'
-  fi
-  ;;
 
-newos6*)
-  lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)'
-  lt_cv_file_magic_cmd=/usr/bin/file
-  lt_cv_file_magic_test_file=/usr/lib/libnls.so
-  ;;
 
-nto-qnx*)
-  lt_cv_deplibs_check_method=unknown
-  ;;
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for grep that handles long lines and -e" >&5
+$as_echo_n "checking for grep that handles long lines and -e... " >&6; }
+if test "${ac_cv_path_GREP+set}" = set; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -z "$GREP"; then
+  ac_path_GREP_found=false
+  # Loop through the user's path and test for each of PROGNAME-LIST
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_prog in grep ggrep; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
+      ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext"
+      { test -f "$ac_path_GREP" && $as_test_x "$ac_path_GREP"; } || continue
+# Check for GNU ac_path_GREP and select it if it is found.
+  # Check for GNU $ac_path_GREP
+case `"$ac_path_GREP" --version 2>&1` in
+*GNU*)
+  ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;;
+*)
+  ac_count=0
+  $as_echo_n 0123456789 >"conftest.in"
+  while :
+  do
+    cat "conftest.in" "conftest.in" >"conftest.tmp"
+    mv "conftest.tmp" "conftest.in"
+    cp "conftest.in" "conftest.nl"
+    $as_echo 'GREP' >> "conftest.nl"
+    "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break
+    diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
+    as_fn_arith $ac_count + 1 && ac_count=$as_val
+    if test $ac_count -gt ${ac_path_GREP_max-0}; then
+      # Best one so far, save it but keep looking for a better one
+      ac_cv_path_GREP="$ac_path_GREP"
+      ac_path_GREP_max=$ac_count
+    fi
+    # 10*(2^10) chars as input seems more than enough
+    test $ac_count -gt 10 && break
+  done
+  rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
+esac
 
-openbsd*)
-  if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-    lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|\.so|_pic\.a)$'
-  else
-    lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$'
+      $ac_path_GREP_found && break 3
+    done
+  done
+  done
+IFS=$as_save_IFS
+  if test -z "$ac_cv_path_GREP"; then
+    as_fn_error "no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
   fi
-  ;;
-
-osf3* | osf4* | osf5*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-rdos*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
+else
+  ac_cv_path_GREP=$GREP
+fi
 
-solaris*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_GREP" >&5
+$as_echo "$ac_cv_path_GREP" >&6; }
+ GREP="$ac_cv_path_GREP"
 
-sysv4 | sysv4.3*)
-  case $host_vendor in
-  motorola)
-    lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]'
-    lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
-    ;;
-  ncr)
-    lt_cv_deplibs_check_method=pass_all
-    ;;
-  sequent)
-    lt_cv_file_magic_cmd='/bin/file'
-    lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )'
-    ;;
-  sni)
-    lt_cv_file_magic_cmd='/bin/file'
-    lt_cv_deplibs_check_method="file_magic ELF [0-9][0-9]*-bit [LM]SB dynamic lib"
-    lt_cv_file_magic_test_file=/lib/libc.so
-    ;;
-  siemens)
-    lt_cv_deplibs_check_method=pass_all
-    ;;
-  pc)
-    lt_cv_deplibs_check_method=pass_all
-    ;;
-  esac
-  ;;
 
-sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for egrep" >&5
+$as_echo_n "checking for egrep... " >&6; }
+if test "${ac_cv_path_EGREP+set}" = set; then :
+  $as_echo_n "(cached) " >&6
+else
+  if echo a | $GREP -E '(a|b)' >/dev/null 2>&1
+   then ac_cv_path_EGREP="$GREP -E"
+   else
+     if test -z "$EGREP"; then
+  ac_path_EGREP_found=false
+  # Loop through the user's path and test for each of PROGNAME-LIST
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_prog in egrep; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
+      ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext"
+      { test -f "$ac_path_EGREP" && $as_test_x "$ac_path_EGREP"; } || continue
+# Check for GNU ac_path_EGREP and select it if it is found.
+  # Check for GNU $ac_path_EGREP
+case `"$ac_path_EGREP" --version 2>&1` in
+*GNU*)
+  ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;;
+*)
+  ac_count=0
+  $as_echo_n 0123456789 >"conftest.in"
+  while :
+  do
+    cat "conftest.in" "conftest.in" >"conftest.tmp"
+    mv "conftest.tmp" "conftest.in"
+    cp "conftest.in" "conftest.nl"
+    $as_echo 'EGREP' >> "conftest.nl"
+    "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break
+    diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
+    as_fn_arith $ac_count + 1 && ac_count=$as_val
+    if test $ac_count -gt ${ac_path_EGREP_max-0}; then
+      # Best one so far, save it but keep looking for a better one
+      ac_cv_path_EGREP="$ac_path_EGREP"
+      ac_path_EGREP_max=$ac_count
+    fi
+    # 10*(2^10) chars as input seems more than enough
+    test $ac_count -gt 10 && break
+  done
+  rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
 esac
 
+      $ac_path_EGREP_found && break 3
+    done
+  done
+  done
+IFS=$as_save_IFS
+  if test -z "$ac_cv_path_EGREP"; then
+    as_fn_error "no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
+  fi
+else
+  ac_cv_path_EGREP=$EGREP
 fi
-{ $as_echo "$as_me:$LINENO: result: $lt_cv_deplibs_check_method" >&5
-$as_echo "$lt_cv_deplibs_check_method" >&6; }
-file_magic_cmd=$lt_cv_file_magic_cmd
-deplibs_check_method=$lt_cv_deplibs_check_method
-test -z "$deplibs_check_method" && deplibs_check_method=unknown
-
-
 
+   fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_EGREP" >&5
+$as_echo "$ac_cv_path_EGREP" >&6; }
+ EGREP="$ac_cv_path_EGREP"
 
-# If no C compiler was specified, use CC.
-LTCC=${LTCC-"$CC"}
 
-# If no C compiler flags were specified, use CFLAGS.
-LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
-
-# Allow CC to be a program name with arguments.
-compiler=$CC
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for fgrep" >&5
+$as_echo_n "checking for fgrep... " >&6; }
+if test "${ac_cv_path_FGREP+set}" = set; then :
+  $as_echo_n "(cached) " >&6
+else
+  if echo 'ab*c' | $GREP -F 'ab*c' >/dev/null 2>&1
+   then ac_cv_path_FGREP="$GREP -F"
+   else
+     if test -z "$FGREP"; then
+  ac_path_FGREP_found=false
+  # Loop through the user's path and test for each of PROGNAME-LIST
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_prog in fgrep; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
+      ac_path_FGREP="$as_dir/$ac_prog$ac_exec_ext"
+      { test -f "$ac_path_FGREP" && $as_test_x "$ac_path_FGREP"; } || continue
+# Check for GNU ac_path_FGREP and select it if it is found.
+  # Check for GNU $ac_path_FGREP
+case `"$ac_path_FGREP" --version 2>&1` in
+*GNU*)
+  ac_cv_path_FGREP="$ac_path_FGREP" ac_path_FGREP_found=:;;
+*)
+  ac_count=0
+  $as_echo_n 0123456789 >"conftest.in"
+  while :
+  do
+    cat "conftest.in" "conftest.in" >"conftest.tmp"
+    mv "conftest.tmp" "conftest.in"
+    cp "conftest.in" "conftest.nl"
+    $as_echo 'FGREP' >> "conftest.nl"
+    "$ac_path_FGREP" FGREP < "conftest.nl" >"conftest.out" 2>/dev/null || break
+    diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
+    as_fn_arith $ac_count + 1 && ac_count=$as_val
+    if test $ac_count -gt ${ac_path_FGREP_max-0}; then
+      # Best one so far, save it but keep looking for a better one
+      ac_cv_path_FGREP="$ac_path_FGREP"
+      ac_path_FGREP_max=$ac_count
+    fi
+    # 10*(2^10) chars as input seems more than enough
+    test $ac_count -gt 10 && break
+  done
+  rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
+esac
 
+      $ac_path_FGREP_found && break 3
+    done
+  done
+  done
+IFS=$as_save_IFS
+  if test -z "$ac_cv_path_FGREP"; then
+    as_fn_error "no acceptable fgrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
+  fi
+else
+  ac_cv_path_FGREP=$FGREP
+fi
 
-# Check whether --enable-libtool-lock was given.
-if test "${enable_libtool_lock+set}" = set; then
-  enableval=$enable_libtool_lock;
+   fi
 fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_FGREP" >&5
+$as_echo "$ac_cv_path_FGREP" >&6; }
+ FGREP="$ac_cv_path_FGREP"
 
-test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
 
-# Some flags need to be propagated to the compiler or linker for good
-# libtool support.
-case $host in
-ia64-*-hpux*)
-  # Find out which ABI we are using.
-  echo 'int i;' > conftest.$ac_ext
-  if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; then
-    case `/usr/bin/file conftest.$ac_objext` in
-    *ELF-32*)
-      HPUX_IA64_MODE="32"
-      ;;
-    *ELF-64*)
-      HPUX_IA64_MODE="64"
-      ;;
-    esac
-  fi
-  rm -rf conftest*
-  ;;
-*-*-irix6*)
-  # Find out which ABI we are using.
-  echo '#line 5591 "configure"' > conftest.$ac_ext
-  if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; then
-   if test "$lt_cv_prog_gnu_ld" = yes; then
-    case `/usr/bin/file conftest.$ac_objext` in
-    *32-bit*)
-      LD="${LD-ld} -melf32bsmip"
-      ;;
-    *N32*)
-      LD="${LD-ld} -melf32bmipn32"
-      ;;
-    *64-bit*)
-      LD="${LD-ld} -melf64bmip"
-      ;;
-    esac
-   else
-    case `/usr/bin/file conftest.$ac_objext` in
-    *32-bit*)
-      LD="${LD-ld} -32"
-      ;;
-    *N32*)
-      LD="${LD-ld} -n32"
-      ;;
-    *64-bit*)
-      LD="${LD-ld} -64"
-      ;;
-    esac
-   fi
-  fi
-  rm -rf conftest*
-  ;;
+test -z "$GREP" && GREP=grep
 
-x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \
-s390*-*linux*|sparc*-*linux*)
-  # Find out which ABI we are using.
-  echo 'int i;' > conftest.$ac_ext
-  if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; then
-    case `/usr/bin/file conftest.o` in
-    *32-bit*)
-      case $host in
-        x86_64-*kfreebsd*-gnu)
-          LD="${LD-ld} -m elf_i386_fbsd"
-          ;;
-        x86_64-*linux*)
-          LD="${LD-ld} -m elf_i386"
-          ;;
-        ppc64-*linux*|powerpc64-*linux*)
-          LD="${LD-ld} -m elf32ppclinux"
-          ;;
-        s390x-*linux*)
-          LD="${LD-ld} -m elf_s390"
-          ;;
-        sparc64-*linux*)
-          LD="${LD-ld} -m elf32_sparc"
-          ;;
-      esac
-      ;;
-    *64-bit*)
-      case $host in
-        x86_64-*kfreebsd*-gnu)
-          LD="${LD-ld} -m elf_x86_64_fbsd"
-          ;;
-        x86_64-*linux*)
-          LD="${LD-ld} -m elf_x86_64"
-          ;;
-        ppc*-*linux*|powerpc*-*linux*)
-          LD="${LD-ld} -m elf64ppc"
-          ;;
-        s390*-*linux*)
-          LD="${LD-ld} -m elf64_s390"
-          ;;
-        sparc*-*linux*)
-          LD="${LD-ld} -m elf64_sparc"
-          ;;
-      esac
-      ;;
-    esac
-  fi
-  rm -rf conftest*
-  ;;
 
-*-*-sco3.2v5*)
-  # On SCO OpenServer 5, we need -belf to get full-featured binaries.
-  SAVE_CFLAGS="$CFLAGS"
-  CFLAGS="$CFLAGS -belf"
-  { $as_echo "$as_me:$LINENO: checking whether the C compiler needs -belf" >&5
-$as_echo_n "checking whether the C compiler needs -belf... " >&6; }
-if test "${lt_cv_cc_needs_belf+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
-  ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
 
-     cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
 
-int
-main ()
-{
 
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_link") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest$ac_exeext && {
-	 test "$cross_compiling" = yes ||
-	 $as_test_x conftest$ac_exeext
-       }; then
-  lt_cv_cc_needs_belf=yes
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
 
-	lt_cv_cc_needs_belf=no
-fi
 
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-      conftest$ac_exeext conftest.$ac_ext
-     ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
 
-fi
-{ $as_echo "$as_me:$LINENO: result: $lt_cv_cc_needs_belf" >&5
-$as_echo "$lt_cv_cc_needs_belf" >&6; }
-  if test x"$lt_cv_cc_needs_belf" != x"yes"; then
-    # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
-    CFLAGS="$SAVE_CFLAGS"
-  fi
-  ;;
-sparc*-*solaris*)
-  # Find out which ABI we are using.
-  echo 'int i;' > conftest.$ac_ext
-  if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; then
-    case `/usr/bin/file conftest.o` in
-    *64-bit*)
-      case $lt_cv_prog_gnu_ld in
-      yes*) LD="${LD-ld} -m elf64_sparc" ;;
-      *)
-        if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then
-	  LD="${LD-ld} -64"
-	fi
-	;;
-      esac
-      ;;
-    esac
-  fi
-  rm -rf conftest*
-  ;;
 
-*-*-cygwin* | *-*-mingw* | *-*-pw32*)
-  if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "${ac_tool_prefix}dlltool", so it can be a program name with args.
-set dummy ${ac_tool_prefix}dlltool; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_DLLTOOL+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$DLLTOOL"; then
-  ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-    ac_cv_prog_DLLTOOL="${ac_tool_prefix}dlltool"
-    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-IFS=$as_save_IFS
 
-fi
-fi
-DLLTOOL=$ac_cv_prog_DLLTOOL
-if test -n "$DLLTOOL"; then
-  { $as_echo "$as_me:$LINENO: result: $DLLTOOL" >&5
-$as_echo "$DLLTOOL" >&6; }
-else
-  { $as_echo "$as_me:$LINENO: result: no" >&5
-$as_echo "no" >&6; }
-fi
 
 
-fi
-if test -z "$ac_cv_prog_DLLTOOL"; then
-  ac_ct_DLLTOOL=$DLLTOOL
-  # Extract the first word of "dlltool", so it can be a program name with args.
-set dummy dlltool; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_ac_ct_DLLTOOL+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$ac_ct_DLLTOOL"; then
-  ac_cv_prog_ac_ct_DLLTOOL="$ac_ct_DLLTOOL" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-    ac_cv_prog_ac_ct_DLLTOOL="dlltool"
-    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-IFS=$as_save_IFS
 
-fi
-fi
-ac_ct_DLLTOOL=$ac_cv_prog_ac_ct_DLLTOOL
-if test -n "$ac_ct_DLLTOOL"; then
-  { $as_echo "$as_me:$LINENO: result: $ac_ct_DLLTOOL" >&5
-$as_echo "$ac_ct_DLLTOOL" >&6; }
-else
-  { $as_echo "$as_me:$LINENO: result: no" >&5
-$as_echo "no" >&6; }
-fi
 
-  if test "x$ac_ct_DLLTOOL" = x; then
-    DLLTOOL="false"
-  else
-    case $cross_compiling:$ac_tool_warned in
-yes:)
-{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5
-$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
-ac_tool_warned=yes ;;
-esac
-    DLLTOOL=$ac_ct_DLLTOOL
-  fi
+
+
+
+
+
+# Check whether --with-gnu-ld was given.
+if test "${with_gnu_ld+set}" = set; then :
+  withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes
 else
-  DLLTOOL="$ac_cv_prog_DLLTOOL"
+  with_gnu_ld=no
 fi
 
-  if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args.
-set dummy ${ac_tool_prefix}as; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_AS+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$AS"; then
-  ac_cv_prog_AS="$AS" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-    ac_cv_prog_AS="${ac_tool_prefix}as"
-    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-IFS=$as_save_IFS
-
+ac_prog=ld
+if test "$GCC" = yes; then
+  # Check if gcc -print-prog-name=ld gives a path.
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ld used by $CC" >&5
+$as_echo_n "checking for ld used by $CC... " >&6; }
+  case $host in
+  *-*-mingw*)
+    # gcc leaves a trailing carriage return which upsets mingw
+    ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
+  *)
+    ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
+  esac
+  case $ac_prog in
+    # Accept absolute paths.
+    [\\/]* | ?:[\\/]*)
+      re_direlt='/[^/][^/]*/\.\./'
+      # Canonicalize the pathname of ld
+      ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'`
+      while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do
+	ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"`
+      done
+      test -z "$LD" && LD="$ac_prog"
+      ;;
+  "")
+    # If it fails, then pretend we aren't using GCC.
+    ac_prog=ld
+    ;;
+  *)
+    # If it is relative, then search for the first ld in PATH.
+    with_gnu_ld=unknown
+    ;;
+  esac
+elif test "$with_gnu_ld" = yes; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU ld" >&5
+$as_echo_n "checking for GNU ld... " >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for non-GNU ld" >&5
+$as_echo_n "checking for non-GNU ld... " >&6; }
+fi
+if test "${lt_cv_path_LD+set}" = set; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -z "$LD"; then
+  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+  for ac_dir in $PATH; do
+    IFS="$lt_save_ifs"
+    test -z "$ac_dir" && ac_dir=.
+    if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
+      lt_cv_path_LD="$ac_dir/$ac_prog"
+      # Check to see if the program is GNU ld.  I'd rather use --version,
+      # but apparently some variants of GNU ld only accept -v.
+      # Break only if it was the GNU/non-GNU ld that we prefer.
+      case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
+      *GNU* | *'with BFD'*)
+	test "$with_gnu_ld" != no && break
+	;;
+      *)
+	test "$with_gnu_ld" != yes && break
+	;;
+      esac
+    fi
+  done
+  IFS="$lt_save_ifs"
+else
+  lt_cv_path_LD="$LD" # Let the user override the test with a path.
 fi
 fi
-AS=$ac_cv_prog_AS
-if test -n "$AS"; then
-  { $as_echo "$as_me:$LINENO: result: $AS" >&5
-$as_echo "$AS" >&6; }
+
+LD="$lt_cv_path_LD"
+if test -n "$LD"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LD" >&5
+$as_echo "$LD" >&6; }
 else
-  { $as_echo "$as_me:$LINENO: result: no" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
 $as_echo "no" >&6; }
 fi
+test -z "$LD" && as_fn_error "no acceptable ld found in \$PATH" "$LINENO" 5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if the linker ($LD) is GNU ld" >&5
+$as_echo_n "checking if the linker ($LD) is GNU ld... " >&6; }
+if test "${lt_cv_prog_gnu_ld+set}" = set; then :
+  $as_echo_n "(cached) " >&6
+else
+  # I'd rather use --version here, but apparently some GNU lds only accept -v.
+case `$LD -v 2>&1 </dev/null` in
+*GNU* | *'with BFD'*)
+  lt_cv_prog_gnu_ld=yes
+  ;;
+*)
+  lt_cv_prog_gnu_ld=no
+  ;;
+esac
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_gnu_ld" >&5
+$as_echo "$lt_cv_prog_gnu_ld" >&6; }
+with_gnu_ld=$lt_cv_prog_gnu_ld
 
 
-fi
-if test -z "$ac_cv_prog_AS"; then
-  ac_ct_AS=$AS
-  # Extract the first word of "as", so it can be a program name with args.
-set dummy as; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_ac_ct_AS+set}" = set; then
+
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for BSD- or MS-compatible name lister (nm)" >&5
+$as_echo_n "checking for BSD- or MS-compatible name lister (nm)... " >&6; }
+if test "${lt_cv_path_NM+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
-  if test -n "$ac_ct_AS"; then
-  ac_cv_prog_ac_ct_AS="$ac_ct_AS" # Let the user override the test.
+  if test -n "$NM"; then
+  # Let the user override the test.
+  lt_cv_path_NM="$NM"
 else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-    ac_cv_prog_ac_ct_AS="as"
-    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
+  lt_nm_to_check="${ac_tool_prefix}nm"
+  if test -n "$ac_tool_prefix" && test "$build" = "$host"; then
+    lt_nm_to_check="$lt_nm_to_check nm"
   fi
-done
-done
-IFS=$as_save_IFS
-
-fi
+  for lt_tmp_nm in $lt_nm_to_check; do
+    lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+    for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do
+      IFS="$lt_save_ifs"
+      test -z "$ac_dir" && ac_dir=.
+      tmp_nm="$ac_dir/$lt_tmp_nm"
+      if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then
+	# Check to see if the nm accepts a BSD-compat flag.
+	# Adding the `sed 1q' prevents false positives on HP-UX, which says:
+	#   nm: unknown option "B" ignored
+	# Tru64's nm complains that /dev/null is an invalid object file
+	case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in
+	*/dev/null* | *'Invalid file or object type'*)
+	  lt_cv_path_NM="$tmp_nm -B"
+	  break
+	  ;;
+	*)
+	  case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in
+	  */dev/null*)
+	    lt_cv_path_NM="$tmp_nm -p"
+	    break
+	    ;;
+	  *)
+	    lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
+	    continue # so that we can try to find one that supports BSD flags
+	    ;;
+	  esac
+	  ;;
+	esac
+      fi
+    done
+    IFS="$lt_save_ifs"
+  done
+  : ${lt_cv_path_NM=no}
 fi
-ac_ct_AS=$ac_cv_prog_ac_ct_AS
-if test -n "$ac_ct_AS"; then
-  { $as_echo "$as_me:$LINENO: result: $ac_ct_AS" >&5
-$as_echo "$ac_ct_AS" >&6; }
-else
-  { $as_echo "$as_me:$LINENO: result: no" >&5
-$as_echo "no" >&6; }
 fi
-
-  if test "x$ac_ct_AS" = x; then
-    AS="false"
-  else
-    case $cross_compiling:$ac_tool_warned in
-yes:)
-{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5
-$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
-ac_tool_warned=yes ;;
-esac
-    AS=$ac_ct_AS
-  fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_NM" >&5
+$as_echo "$lt_cv_path_NM" >&6; }
+if test "$lt_cv_path_NM" != "no"; then
+  NM="$lt_cv_path_NM"
 else
-  AS="$ac_cv_prog_AS"
-fi
-
+  # Didn't find any BSD compatible name lister, look for dumpbin.
   if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "${ac_tool_prefix}objdump", so it can be a program name with args.
-set dummy ${ac_tool_prefix}objdump; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+  for ac_prog in "dumpbin -symbols" "link -dump -symbols"
+  do
+    # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 $as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_OBJDUMP+set}" = set; then
+if test "${ac_cv_prog_DUMPBIN+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
-  if test -n "$OBJDUMP"; then
-  ac_cv_prog_OBJDUMP="$OBJDUMP" # Let the user override the test.
+  if test -n "$DUMPBIN"; then
+  ac_cv_prog_DUMPBIN="$DUMPBIN" # Let the user override the test.
 else
 as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
 for as_dir in $PATH
 do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
   if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-    ac_cv_prog_OBJDUMP="${ac_tool_prefix}objdump"
-    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    ac_cv_prog_DUMPBIN="$ac_tool_prefix$ac_prog"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
-done
+  done
 IFS=$as_save_IFS
 
 fi
 fi
-OBJDUMP=$ac_cv_prog_OBJDUMP
-if test -n "$OBJDUMP"; then
-  { $as_echo "$as_me:$LINENO: result: $OBJDUMP" >&5
-$as_echo "$OBJDUMP" >&6; }
+DUMPBIN=$ac_cv_prog_DUMPBIN
+if test -n "$DUMPBIN"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DUMPBIN" >&5
+$as_echo "$DUMPBIN" >&6; }
 else
-  { $as_echo "$as_me:$LINENO: result: no" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
 $as_echo "no" >&6; }
 fi
 
 
+    test -n "$DUMPBIN" && break
+  done
 fi
-if test -z "$ac_cv_prog_OBJDUMP"; then
-  ac_ct_OBJDUMP=$OBJDUMP
-  # Extract the first word of "objdump", so it can be a program name with args.
-set dummy objdump; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+if test -z "$DUMPBIN"; then
+  ac_ct_DUMPBIN=$DUMPBIN
+  for ac_prog in "dumpbin -symbols" "link -dump -symbols"
+do
+  # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 $as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_ac_ct_OBJDUMP+set}" = set; then
+if test "${ac_cv_prog_ac_ct_DUMPBIN+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
-  if test -n "$ac_ct_OBJDUMP"; then
-  ac_cv_prog_ac_ct_OBJDUMP="$ac_ct_OBJDUMP" # Let the user override the test.
+  if test -n "$ac_ct_DUMPBIN"; then
+  ac_cv_prog_ac_ct_DUMPBIN="$ac_ct_DUMPBIN" # Let the user override the test.
 else
 as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
 for as_dir in $PATH
 do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
   if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-    ac_cv_prog_ac_ct_OBJDUMP="objdump"
-    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    ac_cv_prog_ac_ct_DUMPBIN="$ac_prog"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
-done
+  done
 IFS=$as_save_IFS
 
 fi
 fi
-ac_ct_OBJDUMP=$ac_cv_prog_ac_ct_OBJDUMP
-if test -n "$ac_ct_OBJDUMP"; then
-  { $as_echo "$as_me:$LINENO: result: $ac_ct_OBJDUMP" >&5
-$as_echo "$ac_ct_OBJDUMP" >&6; }
+ac_ct_DUMPBIN=$ac_cv_prog_ac_ct_DUMPBIN
+if test -n "$ac_ct_DUMPBIN"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DUMPBIN" >&5
+$as_echo "$ac_ct_DUMPBIN" >&6; }
 else
-  { $as_echo "$as_me:$LINENO: result: no" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
 $as_echo "no" >&6; }
 fi
 
-  if test "x$ac_ct_OBJDUMP" = x; then
-    OBJDUMP="false"
+
+  test -n "$ac_ct_DUMPBIN" && break
+done
+
+  if test "x$ac_ct_DUMPBIN" = x; then
+    DUMPBIN=":"
   else
     case $cross_compiling:$ac_tool_warned in
 yes:)
-{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
 ac_tool_warned=yes ;;
 esac
-    OBJDUMP=$ac_ct_OBJDUMP
+    DUMPBIN=$ac_ct_DUMPBIN
   fi
-else
-  OBJDUMP="$ac_cv_prog_OBJDUMP"
 fi
 
-  ;;
-
-esac
 
-need_locks="$enable_libtool_lock"
+  if test "$DUMPBIN" != ":"; then
+    NM="$DUMPBIN"
+  fi
+fi
+test -z "$NM" && NM=nm
 
 
 
-{ $as_echo "$as_me:$LINENO: checking for ANSI C header files" >&5
-$as_echo_n "checking for ANSI C header files... " >&6; }
-if test "${ac_cv_header_stdc+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-#include <stdlib.h>
-#include <stdarg.h>
-#include <string.h>
-#include <float.h>
 
-int
-main ()
-{
 
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_compile") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest.$ac_objext; then
-  ac_cv_header_stdc=yes
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
 
-	ac_cv_header_stdc=no
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking the name lister ($NM) interface" >&5
+$as_echo_n "checking the name lister ($NM) interface... " >&6; }
+if test "${lt_cv_nm_interface+set}" = set; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_nm_interface="BSD nm"
+  echo "int some_variable = 0;" > conftest.$ac_ext
+  (eval echo "\"\$as_me:5814: $ac_compile\"" >&5)
+  (eval "$ac_compile" 2>conftest.err)
+  cat conftest.err >&5
+  (eval echo "\"\$as_me:5817: $NM \\\"conftest.$ac_objext\\\"\"" >&5)
+  (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out)
+  cat conftest.err >&5
+  (eval echo "\"\$as_me:5820: output\"" >&5)
+  cat conftest.out >&5
+  if $GREP 'External.*some_variable' conftest.out > /dev/null; then
+    lt_cv_nm_interface="MS dumpbin"
+  fi
+  rm -f conftest*
 fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_nm_interface" >&5
+$as_echo "$lt_cv_nm_interface" >&6; }
 
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-
-if test $ac_cv_header_stdc = yes; then
-  # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-#include <string.h>
-
-_ACEOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
-  $EGREP "memchr" >/dev/null 2>&1; then
-  :
+# find the maximum length of command line arguments
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking the maximum length of command line arguments" >&5
+$as_echo_n "checking the maximum length of command line arguments... " >&6; }
+if test "${lt_cv_sys_max_cmd_len+set}" = set; then :
+  $as_echo_n "(cached) " >&6
 else
-  ac_cv_header_stdc=no
-fi
-rm -f conftest*
-
-fi
+    i=0
+  teststring="ABCD"
 
-if test $ac_cv_header_stdc = yes; then
-  # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-#include <stdlib.h>
+  case $build_os in
+  msdosdjgpp*)
+    # On DJGPP, this test can blow up pretty badly due to problems in libc
+    # (any single argument exceeding 2000 bytes causes a buffer overrun
+    # during glob expansion).  Even if it were fixed, the result of this
+    # check would be larger than it should be.
+    lt_cv_sys_max_cmd_len=12288;    # 12K is about right
+    ;;
 
-_ACEOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
-  $EGREP "free" >/dev/null 2>&1; then
-  :
-else
-  ac_cv_header_stdc=no
-fi
-rm -f conftest*
+  gnu*)
+    # Under GNU Hurd, this test is not required because there is
+    # no limit to the length of command line arguments.
+    # Libtool will interpret -1 as no limit whatsoever
+    lt_cv_sys_max_cmd_len=-1;
+    ;;
 
-fi
+  cygwin* | mingw* | cegcc*)
+    # On Win9x/ME, this test blows up -- it succeeds, but takes
+    # about 5 minutes as the teststring grows exponentially.
+    # Worse, since 9x/ME are not pre-emptively multitasking,
+    # you end up with a "frozen" computer, even though with patience
+    # the test eventually succeeds (with a max line length of 256k).
+    # Instead, let's just punt: use the minimum linelength reported by
+    # all of the supported platforms: 8192 (on NT/2K/XP).
+    lt_cv_sys_max_cmd_len=8192;
+    ;;
 
-if test $ac_cv_header_stdc = yes; then
-  # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi.
-  if test "$cross_compiling" = yes; then
-  :
-else
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-#include <ctype.h>
-#include <stdlib.h>
-#if ((' ' & 0x0FF) == 0x020)
-# define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
-# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
-#else
-# define ISLOWER(c) \
-		   (('a' <= (c) && (c) <= 'i') \
-		     || ('j' <= (c) && (c) <= 'r') \
-		     || ('s' <= (c) && (c) <= 'z'))
-# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c))
-#endif
+  amigaos*)
+    # On AmigaOS with pdksh, this test takes hours, literally.
+    # So we just punt and use a minimum line length of 8192.
+    lt_cv_sys_max_cmd_len=8192;
+    ;;
 
-#define XOR(e, f) (((e) && !(f)) || (!(e) && (f)))
-int
-main ()
-{
-  int i;
-  for (i = 0; i < 256; i++)
-    if (XOR (islower (i), ISLOWER (i))
-	|| toupper (i) != TOUPPER (i))
-      return 2;
-  return 0;
-}
-_ACEOF
-rm -f conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_link") 2>&5
-  ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
-  { (case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_try") 2>&5
-  ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  :
-else
-  $as_echo "$as_me: program exited with status $ac_status" >&5
-$as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
+  netbsd* | freebsd* | openbsd* | darwin* | dragonfly*)
+    # This has been around since 386BSD, at least.  Likely further.
+    if test -x /sbin/sysctl; then
+      lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax`
+    elif test -x /usr/sbin/sysctl; then
+      lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax`
+    else
+      lt_cv_sys_max_cmd_len=65536	# usable default for all BSDs
+    fi
+    # And add a safety zone
+    lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
+    lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
+    ;;
 
-( exit $ac_status )
-ac_cv_header_stdc=no
-fi
-rm -rf conftest.dSYM
-rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
-fi
+  interix*)
+    # We know the value 262144 and hardcode it with a safety zone (like BSD)
+    lt_cv_sys_max_cmd_len=196608
+    ;;
 
+  osf*)
+    # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure
+    # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not
+    # nice to cause kernel panics so lets avoid the loop below.
+    # First set a reasonable default.
+    lt_cv_sys_max_cmd_len=16384
+    #
+    if test -x /sbin/sysconfig; then
+      case `/sbin/sysconfig -q proc exec_disable_arg_limit` in
+        *1*) lt_cv_sys_max_cmd_len=-1 ;;
+      esac
+    fi
+    ;;
+  sco3.2v5*)
+    lt_cv_sys_max_cmd_len=102400
+    ;;
+  sysv5* | sco5v6* | sysv4.2uw2*)
+    kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null`
+    if test -n "$kargmax"; then
+      lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[	 ]//'`
+    else
+      lt_cv_sys_max_cmd_len=32768
+    fi
+    ;;
+  *)
+    lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null`
+    if test -n "$lt_cv_sys_max_cmd_len"; then
+      lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
+      lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
+    else
+      # Make teststring a little bigger before we do anything with it.
+      # a 1K string should be a reasonable start.
+      for i in 1 2 3 4 5 6 7 8 ; do
+        teststring=$teststring$teststring
+      done
+      SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}}
+      # If test is not a shell built-in, we'll probably end up computing a
+      # maximum length that is only half of the actual maximum length, but
+      # we can't tell.
+      while { test "X"`$SHELL $0 --fallback-echo "X$teststring$teststring" 2>/dev/null` \
+	         = "XX$teststring$teststring"; } >/dev/null 2>&1 &&
+	      test $i != 17 # 1/2 MB should be enough
+      do
+        i=`expr $i + 1`
+        teststring=$teststring$teststring
+      done
+      # Only check the string length outside the loop.
+      lt_cv_sys_max_cmd_len=`expr "X$teststring" : ".*" 2>&1`
+      teststring=
+      # Add a significant safety factor because C++ compilers can tack on
+      # massive amounts of additional arguments before passing them to the
+      # linker.  It appears as though 1/2 is a usable value.
+      lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2`
+    fi
+    ;;
+  esac
 
 fi
+
+if test -n $lt_cv_sys_max_cmd_len ; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_sys_max_cmd_len" >&5
+$as_echo "$lt_cv_sys_max_cmd_len" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: none" >&5
+$as_echo "none" >&6; }
 fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5
-$as_echo "$ac_cv_header_stdc" >&6; }
-if test $ac_cv_header_stdc = yes; then
+max_cmd_len=$lt_cv_sys_max_cmd_len
 
-cat >>confdefs.h <<\_ACEOF
-#define STDC_HEADERS 1
-_ACEOF
 
-fi
 
-# On IRIX 5.3, sys/types and inttypes.h are conflicting.
 
 
 
+: ${CP="cp -f"}
+: ${MV="mv -f"}
+: ${RM="rm -f"}
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the shell understands some XSI constructs" >&5
+$as_echo_n "checking whether the shell understands some XSI constructs... " >&6; }
+# Try some XSI features
+xsi_shell=no
+( _lt_dummy="a/b/c"
+  test "${_lt_dummy##*/},${_lt_dummy%/*},"${_lt_dummy%"$_lt_dummy"}, \
+      = c,a/b,, \
+    && eval 'test $(( 1 + 1 )) -eq 2 \
+    && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \
+  && xsi_shell=yes
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $xsi_shell" >&5
+$as_echo "$xsi_shell" >&6; }
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the shell understands \"+=\"" >&5
+$as_echo_n "checking whether the shell understands \"+=\"... " >&6; }
+lt_shell_append=no
+( foo=bar; set foo baz; eval "$1+=\$2" && test "$foo" = barbaz ) \
+    >/dev/null 2>&1 \
+  && lt_shell_append=yes
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_shell_append" >&5
+$as_echo "$lt_shell_append" >&6; }
 
 
+if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
+  lt_unset=unset
+else
+  lt_unset=false
+fi
 
 
 
 
-for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \
-		  inttypes.h stdint.h unistd.h
-do
-as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
-{ $as_echo "$as_me:$LINENO: checking for $ac_header" >&5
-$as_echo_n "checking for $ac_header... " >&6; }
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
-  $as_echo_n "(cached) " >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-$ac_includes_default
 
-#include <$ac_header>
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
+# test EBCDIC or ASCII
+case `echo X|tr X '\101'` in
+ A) # ASCII based system
+    # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr
+  lt_SP2NL='tr \040 \012'
+  lt_NL2SP='tr \015\012 \040\040'
+  ;;
+ *) # EBCDIC based system
+  lt_SP2NL='tr \100 \n'
+  lt_NL2SP='tr \r\n \100\100'
+  ;;
 esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_compile") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest.$ac_objext; then
-  eval "$as_ac_Header=yes"
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
 
-	eval "$as_ac_Header=no"
-fi
 
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-ac_res=`eval 'as_val=${'$as_ac_Header'}
-		 $as_echo "$as_val"'`
-	       { $as_echo "$as_me:$LINENO: result: $ac_res" >&5
-$as_echo "$ac_res" >&6; }
-as_val=`eval 'as_val=${'$as_ac_Header'}
-		 $as_echo "$as_val"'`
-   if test "x$as_val" = x""yes; then
-  cat >>confdefs.h <<_ACEOF
-#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
-_ACEOF
 
-fi
 
-done
 
 
 
-for ac_header in dlfcn.h
-do
-as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
-  { $as_echo "$as_me:$LINENO: checking for $ac_header" >&5
-$as_echo_n "checking for $ac_header... " >&6; }
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $LD option to reload object files" >&5
+$as_echo_n "checking for $LD option to reload object files... " >&6; }
+if test "${lt_cv_ld_reload_flag+set}" = set; then :
   $as_echo_n "(cached) " >&6
-fi
-ac_res=`eval 'as_val=${'$as_ac_Header'}
-		 $as_echo "$as_val"'`
-	       { $as_echo "$as_me:$LINENO: result: $ac_res" >&5
-$as_echo "$ac_res" >&6; }
 else
-  # Is the header compilable?
-{ $as_echo "$as_me:$LINENO: checking $ac_header usability" >&5
-$as_echo_n "checking $ac_header usability... " >&6; }
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-$ac_includes_default
-#include <$ac_header>
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
+  lt_cv_ld_reload_flag='-r'
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_reload_flag" >&5
+$as_echo "$lt_cv_ld_reload_flag" >&6; }
+reload_flag=$lt_cv_ld_reload_flag
+case $reload_flag in
+"" | " "*) ;;
+*) reload_flag=" $reload_flag" ;;
+esac
+reload_cmds='$LD$reload_flag -o $output$reload_objs'
+case $host_os in
+  darwin*)
+    if test "$GCC" = yes; then
+      reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs'
+    else
+      reload_cmds='$LD$reload_flag -o $output$reload_objs'
+    fi
+    ;;
 esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_compile") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest.$ac_objext; then
-  ac_header_compiler=yes
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
 
-	ac_header_compiler=no
-fi
 
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-{ $as_echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
-$as_echo "$ac_header_compiler" >&6; }
 
-# Is the header present?
-{ $as_echo "$as_me:$LINENO: checking $ac_header presence" >&5
-$as_echo_n "checking $ac_header presence... " >&6; }
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-#include <$ac_header>
-_ACEOF
-if { (ac_try="$ac_cpp conftest.$ac_ext"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } >/dev/null && {
-	 test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       }; then
-  ac_header_preproc=yes
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-  ac_header_preproc=no
-fi
-
-rm -f conftest.err conftest.$ac_ext
-{ $as_echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
-$as_echo "$ac_header_preproc" >&6; }
-
-# So?  What about this header?
-case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in
-  yes:no: )
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
-$as_echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5
-$as_echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;}
-    ac_header_preproc=yes
-    ;;
-  no:yes:* )
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5
-$as_echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header:     check for missing prerequisite headers?" >&5
-$as_echo "$as_me: WARNING: $ac_header:     check for missing prerequisite headers?" >&2;}
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5
-$as_echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;}
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header:     section \"Present But Cannot Be Compiled\"" >&5
-$as_echo "$as_me: WARNING: $ac_header:     section \"Present But Cannot Be Compiled\"" >&2;}
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
-$as_echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5
-$as_echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;}
-    ( cat <<\_ASBOX
-## -------------------------- ##
-## Report this to ode@ode.org ##
-## -------------------------- ##
-_ASBOX
-     ) | sed "s/^/$as_me: WARNING:     /" >&2
-    ;;
-esac
-{ $as_echo "$as_me:$LINENO: checking for $ac_header" >&5
-$as_echo_n "checking for $ac_header... " >&6; }
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
-  $as_echo_n "(cached) " >&6
-else
-  eval "$as_ac_Header=\$ac_header_preproc"
-fi
-ac_res=`eval 'as_val=${'$as_ac_Header'}
-		 $as_echo "$as_val"'`
-	       { $as_echo "$as_me:$LINENO: result: $ac_res" >&5
-$as_echo "$ac_res" >&6; }
-
-fi
-as_val=`eval 'as_val=${'$as_ac_Header'}
-		 $as_echo "$as_val"'`
-   if test "x$as_val" = x""yes; then
-  cat >>confdefs.h <<_ACEOF
-#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
-_ACEOF
-
-fi
-
-done
-
-
-
-if test -n "$CXX" && ( test "X$CXX" != "Xno" &&
-    ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) ||
-    (test "X$CXX" != "Xg++"))) ; then
-  ac_ext=cpp
-ac_cpp='$CXXCPP $CPPFLAGS'
-ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
-{ $as_echo "$as_me:$LINENO: checking how to run the C++ preprocessor" >&5
-$as_echo_n "checking how to run the C++ preprocessor... " >&6; }
-if test -z "$CXXCPP"; then
-  if test "${ac_cv_prog_CXXCPP+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
-      # Double quotes because CXXCPP needs to be expanded
-    for CXXCPP in "$CXX -E" "/lib/cpp"
-    do
-      ac_preproc_ok=false
-for ac_cxx_preproc_warn_flag in '' yes
-do
-  # Use a header file that comes with gcc, so configuring glibc
-  # with a fresh cross-compiler works.
-  # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-  # <limits.h> exists even on freestanding compilers.
-  # On the NeXT, cc -E runs the code through the compiler's parser,
-  # not just through cpp. "Syntax error" is here to catch this case.
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
-		     Syntax error
-_ACEOF
-if { (ac_try="$ac_cpp conftest.$ac_ext"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } >/dev/null && {
-	 test -z "$ac_cxx_preproc_warn_flag$ac_cxx_werror_flag" ||
-	 test ! -s conftest.err
-       }; then
-  :
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-  # Broken: fails on valid input.
-continue
-fi
-
-rm -f conftest.err conftest.$ac_ext
-
-  # OK, works on sane cases.  Now check whether nonexistent headers
-  # can be detected and how.
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-#include <ac_nonexistent.h>
-_ACEOF
-if { (ac_try="$ac_cpp conftest.$ac_ext"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } >/dev/null && {
-	 test -z "$ac_cxx_preproc_warn_flag$ac_cxx_werror_flag" ||
-	 test ! -s conftest.err
-       }; then
-  # Broken: success on invalid input.
-continue
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-  # Passes both tests.
-ac_preproc_ok=:
-break
-fi
-
-rm -f conftest.err conftest.$ac_ext
-
-done
-# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
-rm -f conftest.err conftest.$ac_ext
-if $ac_preproc_ok; then
-  break
-fi
-
-    done
-    ac_cv_prog_CXXCPP=$CXXCPP
-
-fi
-  CXXCPP=$ac_cv_prog_CXXCPP
-else
-  ac_cv_prog_CXXCPP=$CXXCPP
-fi
-{ $as_echo "$as_me:$LINENO: result: $CXXCPP" >&5
-$as_echo "$CXXCPP" >&6; }
-ac_preproc_ok=false
-for ac_cxx_preproc_warn_flag in '' yes
-do
-  # Use a header file that comes with gcc, so configuring glibc
-  # with a fresh cross-compiler works.
-  # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-  # <limits.h> exists even on freestanding compilers.
-  # On the NeXT, cc -E runs the code through the compiler's parser,
-  # not just through cpp. "Syntax error" is here to catch this case.
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
-		     Syntax error
-_ACEOF
-if { (ac_try="$ac_cpp conftest.$ac_ext"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } >/dev/null && {
-	 test -z "$ac_cxx_preproc_warn_flag$ac_cxx_werror_flag" ||
-	 test ! -s conftest.err
-       }; then
-  :
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-  # Broken: fails on valid input.
-continue
-fi
-
-rm -f conftest.err conftest.$ac_ext
-
-  # OK, works on sane cases.  Now check whether nonexistent headers
-  # can be detected and how.
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-#include <ac_nonexistent.h>
-_ACEOF
-if { (ac_try="$ac_cpp conftest.$ac_ext"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } >/dev/null && {
-	 test -z "$ac_cxx_preproc_warn_flag$ac_cxx_werror_flag" ||
-	 test ! -s conftest.err
-       }; then
-  # Broken: success on invalid input.
-continue
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-  # Passes both tests.
-ac_preproc_ok=:
-break
-fi
 
-rm -f conftest.err conftest.$ac_ext
 
-done
-# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
-rm -f conftest.err conftest.$ac_ext
-if $ac_preproc_ok; then
-  :
-else
-  { { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5
-$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-{ { $as_echo "$as_me:$LINENO: error: C++ preprocessor \"$CXXCPP\" fails sanity check
-See \`config.log' for more details." >&5
-$as_echo "$as_me: error: C++ preprocessor \"$CXXCPP\" fails sanity check
-See \`config.log' for more details." >&2;}
-   { (exit 1); exit 1; }; }; }
-fi
 
-ac_ext=cpp
-ac_cpp='$CXXCPP $CPPFLAGS'
-ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
 
-fi
 
 
-ac_ext=f
-ac_compile='$F77 -c $FFLAGS conftest.$ac_ext >&5'
-ac_link='$F77 -o conftest$ac_exeext $FFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_f77_compiler_gnu
 if test -n "$ac_tool_prefix"; then
-  for ac_prog in g77 xlf f77 frt pgf77 cf77 fort77 fl32 af77 xlf90 f90 pgf90 pghpf epcf90 gfortran g95 xlf95 f95 fort ifort ifc efc pgf95 lf95 ftn
-  do
-    # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
-set dummy $ac_tool_prefix$ac_prog; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+  # Extract the first word of "${ac_tool_prefix}objdump", so it can be a program name with args.
+set dummy ${ac_tool_prefix}objdump; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 $as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_F77+set}" = set; then
+if test "${ac_cv_prog_OBJDUMP+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
-  if test -n "$F77"; then
-  ac_cv_prog_F77="$F77" # Let the user override the test.
+  if test -n "$OBJDUMP"; then
+  ac_cv_prog_OBJDUMP="$OBJDUMP" # Let the user override the test.
 else
 as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
 for as_dir in $PATH
 do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
   if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-    ac_cv_prog_F77="$ac_tool_prefix$ac_prog"
-    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    ac_cv_prog_OBJDUMP="${ac_tool_prefix}objdump"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
-done
+  done
 IFS=$as_save_IFS
 
 fi
 fi
-F77=$ac_cv_prog_F77
-if test -n "$F77"; then
-  { $as_echo "$as_me:$LINENO: result: $F77" >&5
-$as_echo "$F77" >&6; }
+OBJDUMP=$ac_cv_prog_OBJDUMP
+if test -n "$OBJDUMP"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OBJDUMP" >&5
+$as_echo "$OBJDUMP" >&6; }
 else
-  { $as_echo "$as_me:$LINENO: result: no" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
 $as_echo "no" >&6; }
 fi
 
 
-    test -n "$F77" && break
-  done
 fi
-if test -z "$F77"; then
-  ac_ct_F77=$F77
-  for ac_prog in g77 xlf f77 frt pgf77 cf77 fort77 fl32 af77 xlf90 f90 pgf90 pghpf epcf90 gfortran g95 xlf95 f95 fort ifort ifc efc pgf95 lf95 ftn
-do
-  # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+if test -z "$ac_cv_prog_OBJDUMP"; then
+  ac_ct_OBJDUMP=$OBJDUMP
+  # Extract the first word of "objdump", so it can be a program name with args.
+set dummy objdump; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 $as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_ac_ct_F77+set}" = set; then
+if test "${ac_cv_prog_ac_ct_OBJDUMP+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
-  if test -n "$ac_ct_F77"; then
-  ac_cv_prog_ac_ct_F77="$ac_ct_F77" # Let the user override the test.
+  if test -n "$ac_ct_OBJDUMP"; then
+  ac_cv_prog_ac_ct_OBJDUMP="$ac_ct_OBJDUMP" # Let the user override the test.
 else
 as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
 for as_dir in $PATH
 do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
   if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-    ac_cv_prog_ac_ct_F77="$ac_prog"
-    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    ac_cv_prog_ac_ct_OBJDUMP="objdump"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
-done
+  done
 IFS=$as_save_IFS
 
 fi
 fi
-ac_ct_F77=$ac_cv_prog_ac_ct_F77
-if test -n "$ac_ct_F77"; then
-  { $as_echo "$as_me:$LINENO: result: $ac_ct_F77" >&5
-$as_echo "$ac_ct_F77" >&6; }
+ac_ct_OBJDUMP=$ac_cv_prog_ac_ct_OBJDUMP
+if test -n "$ac_ct_OBJDUMP"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OBJDUMP" >&5
+$as_echo "$ac_ct_OBJDUMP" >&6; }
 else
-  { $as_echo "$as_me:$LINENO: result: no" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
 $as_echo "no" >&6; }
 fi
 
-
-  test -n "$ac_ct_F77" && break
-done
-
-  if test "x$ac_ct_F77" = x; then
-    F77=""
+  if test "x$ac_ct_OBJDUMP" = x; then
+    OBJDUMP="false"
   else
     case $cross_compiling:$ac_tool_warned in
 yes:)
-{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
 ac_tool_warned=yes ;;
 esac
-    F77=$ac_ct_F77
+    OBJDUMP=$ac_ct_OBJDUMP
   fi
+else
+  OBJDUMP="$ac_cv_prog_OBJDUMP"
 fi
 
+test -z "$OBJDUMP" && OBJDUMP=objdump
 
-# Provide some information about the compiler.
-$as_echo "$as_me:$LINENO: checking for Fortran 77 compiler version" >&5
-set X $ac_compile
-ac_compiler=$2
-{ (ac_try="$ac_compiler --version >&5"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_compiler --version >&5") 2>&5
-  ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }
-{ (ac_try="$ac_compiler -v >&5"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_compiler -v >&5") 2>&5
-  ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }
-{ (ac_try="$ac_compiler -V >&5"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_compiler -V >&5") 2>&5
-  ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }
-rm -f a.out
-
-# If we don't use `.F' as extension, the preprocessor is not run on the
-# input file.  (Note that this only needs to work for GNU compilers.)
-ac_save_ext=$ac_ext
-ac_ext=F
-{ $as_echo "$as_me:$LINENO: checking whether we are using the GNU Fortran 77 compiler" >&5
-$as_echo_n "checking whether we are using the GNU Fortran 77 compiler... " >&6; }
-if test "${ac_cv_f77_compiler_gnu+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-      program main
-#ifndef __GNUC__
-       choke me
-#endif
 
-      end
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_compile") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_f77_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest.$ac_objext; then
-  ac_compiler_gnu=yes
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
 
-	ac_compiler_gnu=no
-fi
 
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-ac_cv_f77_compiler_gnu=$ac_compiler_gnu
 
-fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_f77_compiler_gnu" >&5
-$as_echo "$ac_cv_f77_compiler_gnu" >&6; }
-ac_ext=$ac_save_ext
-ac_test_FFLAGS=${FFLAGS+set}
-ac_save_FFLAGS=$FFLAGS
-FFLAGS=
-{ $as_echo "$as_me:$LINENO: checking whether $F77 accepts -g" >&5
-$as_echo_n "checking whether $F77 accepts -g... " >&6; }
-if test "${ac_cv_prog_f77_g+set}" = set; then
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to recognize dependent libraries" >&5
+$as_echo_n "checking how to recognize dependent libraries... " >&6; }
+if test "${lt_cv_deplibs_check_method+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
-  FFLAGS=-g
-cat >conftest.$ac_ext <<_ACEOF
-      program main
+  lt_cv_file_magic_cmd='$MAGIC_CMD'
+lt_cv_file_magic_test_file=
+lt_cv_deplibs_check_method='unknown'
+# Need to set the preceding variable on all platforms that support
+# interlibrary dependencies.
+# 'none' -- dependencies not supported.
+# `unknown' -- same as none, but documents that we really don't know.
+# 'pass_all' -- all dependencies passed with no checks.
+# 'test_compile' -- check by making test program.
+# 'file_magic [[regex]]' -- check by looking for files in library path
+# which responds to the $file_magic_cmd with a given extended regex.
+# If you have `file' or equivalent on your system and you're not sure
+# whether `pass_all' will *always* work, you probably want this one.
 
-      end
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_compile") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_f77_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest.$ac_objext; then
-  ac_cv_prog_f77_g=yes
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
+case $host_os in
+aix[4-9]*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
 
-	ac_cv_prog_f77_g=no
-fi
+beos*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
 
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+bsdi[45]*)
+  lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)'
+  lt_cv_file_magic_cmd='/usr/bin/file -L'
+  lt_cv_file_magic_test_file=/shlib/libc.so
+  ;;
 
-fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_prog_f77_g" >&5
-$as_echo "$ac_cv_prog_f77_g" >&6; }
-if test "$ac_test_FFLAGS" = set; then
-  FFLAGS=$ac_save_FFLAGS
-elif test $ac_cv_prog_f77_g = yes; then
-  if test "x$ac_cv_f77_compiler_gnu" = xyes; then
-    FFLAGS="-g -O2"
-  else
-    FFLAGS="-g"
-  fi
-else
-  if test "x$ac_cv_f77_compiler_gnu" = xyes; then
-    FFLAGS="-O2"
+cygwin*)
+  # func_win32_libid is a shell function defined in ltmain.sh
+  lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
+  lt_cv_file_magic_cmd='func_win32_libid'
+  ;;
+
+mingw* | pw32*)
+  # Base MSYS/MinGW do not provide the 'file' command needed by
+  # func_win32_libid shell function, so use a weaker test based on 'objdump',
+  # unless we find 'file', for example because we are cross-compiling.
+  if ( file / ) >/dev/null 2>&1; then
+    lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
+    lt_cv_file_magic_cmd='func_win32_libid'
   else
-    FFLAGS=
+    lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
+    lt_cv_file_magic_cmd='$OBJDUMP -f'
   fi
-fi
-
-if test $ac_compiler_gnu = yes; then
-  G77=yes
-else
-  G77=
-fi
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-
-
-# Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers!
-# find the maximum length of command line arguments
-{ $as_echo "$as_me:$LINENO: checking the maximum length of command line arguments" >&5
-$as_echo_n "checking the maximum length of command line arguments... " >&6; }
-if test "${lt_cv_sys_max_cmd_len+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
-    i=0
-  teststring="ABCD"
-
-  case $build_os in
-  msdosdjgpp*)
-    # On DJGPP, this test can blow up pretty badly due to problems in libc
-    # (any single argument exceeding 2000 bytes causes a buffer overrun
-    # during glob expansion).  Even if it were fixed, the result of this
-    # check would be larger than it should be.
-    lt_cv_sys_max_cmd_len=12288;    # 12K is about right
-    ;;
-
-  gnu*)
-    # Under GNU Hurd, this test is not required because there is
-    # no limit to the length of command line arguments.
-    # Libtool will interpret -1 as no limit whatsoever
-    lt_cv_sys_max_cmd_len=-1;
-    ;;
+  ;;
 
-  cygwin* | mingw*)
-    # On Win9x/ME, this test blows up -- it succeeds, but takes
-    # about 5 minutes as the teststring grows exponentially.
-    # Worse, since 9x/ME are not pre-emptively multitasking,
-    # you end up with a "frozen" computer, even though with patience
-    # the test eventually succeeds (with a max line length of 256k).
-    # Instead, let's just punt: use the minimum linelength reported by
-    # all of the supported platforms: 8192 (on NT/2K/XP).
-    lt_cv_sys_max_cmd_len=8192;
-    ;;
+cegcc)
+  # use the weaker test based on 'objdump'. See mingw*.
+  lt_cv_deplibs_check_method='file_magic file format pe-arm-.*little(.*architecture: arm)?'
+  lt_cv_file_magic_cmd='$OBJDUMP -f'
+  ;;
 
-  amigaos*)
-    # On AmigaOS with pdksh, this test takes hours, literally.
-    # So we just punt and use a minimum line length of 8192.
-    lt_cv_sys_max_cmd_len=8192;
-    ;;
+darwin* | rhapsody*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
 
-  netbsd* | freebsd* | openbsd* | darwin* | dragonfly*)
-    # This has been around since 386BSD, at least.  Likely further.
-    if test -x /sbin/sysctl; then
-      lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax`
-    elif test -x /usr/sbin/sysctl; then
-      lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax`
-    else
-      lt_cv_sys_max_cmd_len=65536	# usable default for all BSDs
-    fi
-    # And add a safety zone
-    lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
-    lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
-    ;;
+freebsd* | dragonfly*)
+  if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
+    case $host_cpu in
+    i*86 )
+      # Not sure whether the presence of OpenBSD here was a mistake.
+      # Let's accept both of them until this is cleared up.
+      lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[3-9]86 (compact )?demand paged shared library'
+      lt_cv_file_magic_cmd=/usr/bin/file
+      lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
+      ;;
+    esac
+  else
+    lt_cv_deplibs_check_method=pass_all
+  fi
+  ;;
 
-  interix*)
-    # We know the value 262144 and hardcode it with a safety zone (like BSD)
-    lt_cv_sys_max_cmd_len=196608
-    ;;
+gnu*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
 
-  osf*)
-    # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure
-    # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not
-    # nice to cause kernel panics so lets avoid the loop below.
-    # First set a reasonable default.
-    lt_cv_sys_max_cmd_len=16384
-    #
-    if test -x /sbin/sysconfig; then
-      case `/sbin/sysconfig -q proc exec_disable_arg_limit` in
-        *1*) lt_cv_sys_max_cmd_len=-1 ;;
-      esac
-    fi
-    ;;
-  sco3.2v5*)
-    lt_cv_sys_max_cmd_len=102400
+hpux10.20* | hpux11*)
+  lt_cv_file_magic_cmd=/usr/bin/file
+  case $host_cpu in
+  ia64*)
+    lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - IA64'
+    lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
     ;;
-  sysv5* | sco5v6* | sysv4.2uw2*)
-    kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null`
-    if test -n "$kargmax"; then
-      lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[ 	]//'`
-    else
-      lt_cv_sys_max_cmd_len=32768
-    fi
+  hppa*64*)
+    lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - PA-RISC [0-9].[0-9]'
+    lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl
     ;;
   *)
-    lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null`
-    if test -n "$lt_cv_sys_max_cmd_len"; then
-      lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
-      lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
-    else
-      SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}}
-      while (test "X"`$SHELL $0 --fallback-echo "X$teststring" 2>/dev/null` \
-	       = "XX$teststring") >/dev/null 2>&1 &&
-	      new_result=`expr "X$teststring" : ".*" 2>&1` &&
-	      lt_cv_sys_max_cmd_len=$new_result &&
-	      test $i != 17 # 1/2 MB should be enough
-      do
-        i=`expr $i + 1`
-        teststring=$teststring$teststring
-      done
-      teststring=
-      # Add a significant safety factor because C++ compilers can tack on massive
-      # amounts of additional arguments before passing them to the linker.
-      # It appears as though 1/2 is a usable value.
-      lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2`
-    fi
+    lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9].[0-9]) shared library'
+    lt_cv_file_magic_test_file=/usr/lib/libc.sl
     ;;
   esac
+  ;;
 
-fi
-
-if test -n $lt_cv_sys_max_cmd_len ; then
-  { $as_echo "$as_me:$LINENO: result: $lt_cv_sys_max_cmd_len" >&5
-$as_echo "$lt_cv_sys_max_cmd_len" >&6; }
-else
-  { $as_echo "$as_me:$LINENO: result: none" >&5
-$as_echo "none" >&6; }
-fi
-
-
+interix[3-9]*)
+  # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here
+  lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|\.a)$'
+  ;;
 
+irix5* | irix6* | nonstopux*)
+  case $LD in
+  *-32|*"-32 ") libmagic=32-bit;;
+  *-n32|*"-n32 ") libmagic=N32;;
+  *-64|*"-64 ") libmagic=64-bit;;
+  *) libmagic=never-match;;
+  esac
+  lt_cv_deplibs_check_method=pass_all
+  ;;
 
+# This must be Linux ELF.
+linux* | k*bsd*-gnu)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
 
-# Check for command to grab the raw symbol name followed by C symbol from nm.
-{ $as_echo "$as_me:$LINENO: checking command to parse $NM output from $compiler object" >&5
-$as_echo_n "checking command to parse $NM output from $compiler object... " >&6; }
-if test "${lt_cv_sys_global_symbol_pipe+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
-
-# These are sane defaults that work on at least a few old systems.
-# [They come from Ultrix.  What could be older than Ultrix?!! ;)]
-
-# Character class describing NM global symbol codes.
-symcode='[BCDEGRST]'
-
-# Regexp to match symbols that can be accessed directly from C.
-sympat='\([_A-Za-z][_A-Za-z0-9]*\)'
-
-# Transform an extracted symbol line into a proper C declaration
-lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern int \1;/p'"
-
-# Transform an extracted symbol line into symbol name and symbol address
-lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/  {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode \([^ ]*\) \([^ ]*\)$/  {\"\2\", (lt_ptr) \&\2},/p'"
-
-# Define system-specific variables.
-case $host_os in
-aix*)
-  symcode='[BCDT]'
+netbsd* | netbsdelf*-gnu)
+  if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
+    lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$'
+  else
+    lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|_pic\.a)$'
+  fi
   ;;
-cygwin* | mingw* | pw32*)
-  symcode='[ABCDGISTW]'
+
+newos6*)
+  lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)'
+  lt_cv_file_magic_cmd=/usr/bin/file
+  lt_cv_file_magic_test_file=/usr/lib/libnls.so
   ;;
-hpux*) # Its linker distinguishes data from code symbols
-  if test "$host_cpu" = ia64; then
-    symcode='[ABCDEGRST]'
-  fi
-  lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
-  lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/  {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/  {\"\2\", (lt_ptr) \&\2},/p'"
+
+*nto* | *qnx*)
+  lt_cv_deplibs_check_method=pass_all
   ;;
-linux* | k*bsd*-gnu)
-  if test "$host_cpu" = ia64; then
-    symcode='[ABCDGIRSTW]'
-    lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
-    lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/  {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/  {\"\2\", (lt_ptr) \&\2},/p'"
+
+openbsd*)
+  if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+    lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|\.so|_pic\.a)$'
+  else
+    lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$'
   fi
   ;;
-irix* | nonstopux*)
-  symcode='[BCDEGRST]'
+
+osf3* | osf4* | osf5*)
+  lt_cv_deplibs_check_method=pass_all
   ;;
-osf*)
-  symcode='[BCDEGQRST]'
+
+rdos*)
+  lt_cv_deplibs_check_method=pass_all
   ;;
+
 solaris*)
-  symcode='[BDRT]'
-  ;;
-sco3.2v5*)
-  symcode='[DT]'
-  ;;
-sysv4.2uw2*)
-  symcode='[DT]'
-  ;;
-sysv5* | sco5v6* | unixware* | OpenUNIX*)
-  symcode='[ABDT]'
+  lt_cv_deplibs_check_method=pass_all
   ;;
-sysv4)
-  symcode='[DFNSTU]'
+
+sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
+  lt_cv_deplibs_check_method=pass_all
   ;;
-esac
 
-# Handle CRLF in mingw tool chain
-opt_cr=
-case $build_os in
-mingw*)
-  opt_cr=`echo 'x\{0,1\}' | tr x '\015'` # option cr in regexp
+sysv4 | sysv4.3*)
+  case $host_vendor in
+  motorola)
+    lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]'
+    lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
+    ;;
+  ncr)
+    lt_cv_deplibs_check_method=pass_all
+    ;;
+  sequent)
+    lt_cv_file_magic_cmd='/bin/file'
+    lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )'
+    ;;
+  sni)
+    lt_cv_file_magic_cmd='/bin/file'
+    lt_cv_deplibs_check_method="file_magic ELF [0-9][0-9]*-bit [LM]SB dynamic lib"
+    lt_cv_file_magic_test_file=/lib/libc.so
+    ;;
+  siemens)
+    lt_cv_deplibs_check_method=pass_all
+    ;;
+  pc)
+    lt_cv_deplibs_check_method=pass_all
+    ;;
+  esac
   ;;
-esac
 
-# If we're using GNU nm, then use its standard symbol codes.
-case `$NM -V 2>&1` in
-*GNU* | *'with BFD'*)
-  symcode='[ABCDGIRSTW]' ;;
+tpf*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
 esac
 
-# Try without a prefix undercore, then with it.
-for ac_symprfx in "" "_"; do
-
-  # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol.
-  symxfrm="\\1 $ac_symprfx\\2 \\2"
-
-  # Write the raw and C identifiers.
-  lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[ 	]\($symcode$symcode*\)[ 	][ 	]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'"
-
-  # Check to see that the pipe works correctly.
-  pipe_works=no
-
-  rm -f conftest*
-  cat > conftest.$ac_ext <<EOF
-#ifdef __cplusplus
-extern "C" {
-#endif
-char nm_test_var;
-void nm_test_func(){}
-#ifdef __cplusplus
-}
-#endif
-int main(){nm_test_var='a';nm_test_func();return(0);}
-EOF
-
-  if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; then
-    # Now try to grab the symbols.
-    nlist=conftest.nm
-    if { (eval echo "$as_me:$LINENO: \"$NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist\"") >&5
-  (eval $NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) 2>&5
-  ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && test -s "$nlist"; then
-      # Try sorting and uniquifying the output.
-      if sort "$nlist" | uniq > "$nlist"T; then
-	mv -f "$nlist"T "$nlist"
-      else
-	rm -f "$nlist"T
-      fi
-
-      # Make sure that we snagged all the symbols we need.
-      if grep ' nm_test_var$' "$nlist" >/dev/null; then
-	if grep ' nm_test_func$' "$nlist" >/dev/null; then
-	  cat <<EOF > conftest.$ac_ext
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-EOF
-	  # Now generate the symbol file.
-	  eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | grep -v main >> conftest.$ac_ext'
-
-	  cat <<EOF >> conftest.$ac_ext
-#if defined (__STDC__) && __STDC__
-# define lt_ptr_t void *
-#else
-# define lt_ptr_t char *
-# define const
-#endif
-
-/* The mapping between symbol names and symbols. */
-const struct {
-  const char *name;
-  lt_ptr_t address;
-}
-lt_preloaded_symbols[] =
-{
-EOF
-	  $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/  {\"\2\", (lt_ptr_t) \&\2},/" < "$nlist" | grep -v main >> conftest.$ac_ext
-	  cat <<\EOF >> conftest.$ac_ext
-  {0, (lt_ptr_t) 0}
-};
-
-#ifdef __cplusplus
-}
-#endif
-EOF
-	  # Now try linking the two files.
-	  mv conftest.$ac_objext conftstm.$ac_objext
-	  lt_save_LIBS="$LIBS"
-	  lt_save_CFLAGS="$CFLAGS"
-	  LIBS="conftstm.$ac_objext"
-	  CFLAGS="$CFLAGS$lt_prog_compiler_no_builtin_flag"
-	  if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && test -s conftest${ac_exeext}; then
-	    pipe_works=yes
-	  fi
-	  LIBS="$lt_save_LIBS"
-	  CFLAGS="$lt_save_CFLAGS"
-	else
-	  echo "cannot find nm_test_func in $nlist" >&5
-	fi
-      else
-	echo "cannot find nm_test_var in $nlist" >&5
-      fi
-    else
-      echo "cannot run $lt_cv_sys_global_symbol_pipe" >&5
-    fi
-  else
-    echo "$progname: failed program was:" >&5
-    cat conftest.$ac_ext >&5
-  fi
-  rm -rf conftest* conftst*
-
-  # Do not use the global_symbol_pipe unless it works.
-  if test "$pipe_works" = yes; then
-    break
-  else
-    lt_cv_sys_global_symbol_pipe=
-  fi
-done
-
-fi
-
-if test -z "$lt_cv_sys_global_symbol_pipe"; then
-  lt_cv_sys_global_symbol_to_cdecl=
-fi
-if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then
-  { $as_echo "$as_me:$LINENO: result: failed" >&5
-$as_echo "failed" >&6; }
-else
-  { $as_echo "$as_me:$LINENO: result: ok" >&5
-$as_echo "ok" >&6; }
-fi
-
-{ $as_echo "$as_me:$LINENO: checking for objdir" >&5
-$as_echo_n "checking for objdir... " >&6; }
-if test "${lt_cv_objdir+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
-  rm -f .libs 2>/dev/null
-mkdir .libs 2>/dev/null
-if test -d .libs; then
-  lt_cv_objdir=.libs
-else
-  # MS-DOS does not allow filenames that begin with a dot.
-  lt_cv_objdir=_libs
-fi
-rmdir .libs 2>/dev/null
 fi
-{ $as_echo "$as_me:$LINENO: result: $lt_cv_objdir" >&5
-$as_echo "$lt_cv_objdir" >&6; }
-objdir=$lt_cv_objdir
-
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_deplibs_check_method" >&5
+$as_echo "$lt_cv_deplibs_check_method" >&6; }
+file_magic_cmd=$lt_cv_file_magic_cmd
+deplibs_check_method=$lt_cv_deplibs_check_method
+test -z "$deplibs_check_method" && deplibs_check_method=unknown
 
 
 
 
-case $host_os in
-aix3*)
-  # AIX sometimes has problems with the GCC collect2 program.  For some
-  # reason, if we set the COLLECT_NAMES environment variable, the problems
-  # vanish in a puff of smoke.
-  if test "X${COLLECT_NAMES+set}" != Xset; then
-    COLLECT_NAMES=
-    export COLLECT_NAMES
-  fi
-  ;;
-esac
 
-# Sed substitution that helps us do robust quoting.  It backslashifies
-# metacharacters that are still active within double-quoted strings.
-Xsed='sed -e 1s/^X//'
-sed_quote_subst='s/\([\\"\\`$\\\\]\)/\\\1/g'
 
-# Same as above, but do not quote variable references.
-double_quote_subst='s/\([\\"\\`\\\\]\)/\\\1/g'
 
-# Sed substitution to delay expansion of an escaped shell variable in a
-# double_quote_subst'ed string.
-delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
 
-# Sed substitution to avoid accidental globbing in evaled expressions
-no_glob_subst='s/\*/\\\*/g'
 
-# Constants:
-rm="rm -f"
 
-# Global variables:
-default_ofile=libtool
-can_build_shared=yes
 
-# All known linkers require a `.a' archive for static linking (except MSVC,
-# which needs '.lib').
-libext=a
-ltmain="$ac_aux_dir/ltmain.sh"
-ofile="$default_ofile"
-with_gnu_ld="$lt_cv_prog_gnu_ld"
 
 if test -n "$ac_tool_prefix"; then
   # Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
 set dummy ${ac_tool_prefix}ar; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 $as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_AR+set}" = set; then
+if test "${ac_cv_prog_AR+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
   if test -n "$AR"; then
@@ -7389,24 +6381,24 @@
 do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
   if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_AR="${ac_tool_prefix}ar"
-    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
-done
+  done
 IFS=$as_save_IFS
 
 fi
 fi
 AR=$ac_cv_prog_AR
 if test -n "$AR"; then
-  { $as_echo "$as_me:$LINENO: result: $AR" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AR" >&5
 $as_echo "$AR" >&6; }
 else
-  { $as_echo "$as_me:$LINENO: result: no" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
 $as_echo "no" >&6; }
 fi
 
@@ -7416,9 +6408,9 @@
   ac_ct_AR=$AR
   # Extract the first word of "ar", so it can be a program name with args.
 set dummy ar; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 $as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_ac_ct_AR+set}" = set; then
+if test "${ac_cv_prog_ac_ct_AR+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
   if test -n "$ac_ct_AR"; then
@@ -7429,24 +6421,24 @@
 do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
   if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_ac_ct_AR="ar"
-    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
-done
+  done
 IFS=$as_save_IFS
 
 fi
 fi
 ac_ct_AR=$ac_cv_prog_ac_ct_AR
 if test -n "$ac_ct_AR"; then
-  { $as_echo "$as_me:$LINENO: result: $ac_ct_AR" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_AR" >&5
 $as_echo "$ac_ct_AR" >&6; }
 else
-  { $as_echo "$as_me:$LINENO: result: no" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
 $as_echo "no" >&6; }
 fi
 
@@ -7455,7 +6447,7 @@
   else
     case $cross_compiling:$ac_tool_warned in
 yes:)
-{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
 ac_tool_warned=yes ;;
 esac
@@ -7465,211 +6457,216 @@
   AR="$ac_cv_prog_AR"
 fi
 
-if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ranlib; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+test -z "$AR" && AR=ar
+test -z "$AR_FLAGS" && AR_FLAGS=cru
+
+
+
+
+
+
+
+
+
+
+
+if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
+set dummy ${ac_tool_prefix}strip; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 $as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_RANLIB+set}" = set; then
+if test "${ac_cv_prog_STRIP+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
-  if test -n "$RANLIB"; then
-  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
+  if test -n "$STRIP"; then
+  ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
 else
 as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
 for as_dir in $PATH
 do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
   if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-    ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
-    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    ac_cv_prog_STRIP="${ac_tool_prefix}strip"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
-done
+  done
 IFS=$as_save_IFS
 
 fi
 fi
-RANLIB=$ac_cv_prog_RANLIB
-if test -n "$RANLIB"; then
-  { $as_echo "$as_me:$LINENO: result: $RANLIB" >&5
-$as_echo "$RANLIB" >&6; }
+STRIP=$ac_cv_prog_STRIP
+if test -n "$STRIP"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5
+$as_echo "$STRIP" >&6; }
 else
-  { $as_echo "$as_me:$LINENO: result: no" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
 $as_echo "no" >&6; }
 fi
 
 
 fi
-if test -z "$ac_cv_prog_RANLIB"; then
-  ac_ct_RANLIB=$RANLIB
-  # Extract the first word of "ranlib", so it can be a program name with args.
-set dummy ranlib; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+if test -z "$ac_cv_prog_STRIP"; then
+  ac_ct_STRIP=$STRIP
+  # Extract the first word of "strip", so it can be a program name with args.
+set dummy strip; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 $as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then
+if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
-  if test -n "$ac_ct_RANLIB"; then
-  ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test.
+  if test -n "$ac_ct_STRIP"; then
+  ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.
 else
 as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
 for as_dir in $PATH
 do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
   if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-    ac_cv_prog_ac_ct_RANLIB="ranlib"
-    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    ac_cv_prog_ac_ct_STRIP="strip"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
-done
+  done
 IFS=$as_save_IFS
 
 fi
 fi
-ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB
-if test -n "$ac_ct_RANLIB"; then
-  { $as_echo "$as_me:$LINENO: result: $ac_ct_RANLIB" >&5
-$as_echo "$ac_ct_RANLIB" >&6; }
+ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
+if test -n "$ac_ct_STRIP"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5
+$as_echo "$ac_ct_STRIP" >&6; }
 else
-  { $as_echo "$as_me:$LINENO: result: no" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
 $as_echo "no" >&6; }
 fi
 
-  if test "x$ac_ct_RANLIB" = x; then
-    RANLIB=":"
+  if test "x$ac_ct_STRIP" = x; then
+    STRIP=":"
   else
     case $cross_compiling:$ac_tool_warned in
 yes:)
-{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
 ac_tool_warned=yes ;;
 esac
-    RANLIB=$ac_ct_RANLIB
+    STRIP=$ac_ct_STRIP
   fi
 else
-  RANLIB="$ac_cv_prog_RANLIB"
+  STRIP="$ac_cv_prog_STRIP"
 fi
 
+test -z "$STRIP" && STRIP=:
+
+
+
+
+
+
 if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
-set dummy ${ac_tool_prefix}strip; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+  # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
+set dummy ${ac_tool_prefix}ranlib; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 $as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_STRIP+set}" = set; then
+if test "${ac_cv_prog_RANLIB+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
-  if test -n "$STRIP"; then
-  ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
+  if test -n "$RANLIB"; then
+  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
 else
 as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
 for as_dir in $PATH
 do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
   if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-    ac_cv_prog_STRIP="${ac_tool_prefix}strip"
-    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
-done
+  done
 IFS=$as_save_IFS
 
 fi
 fi
-STRIP=$ac_cv_prog_STRIP
-if test -n "$STRIP"; then
-  { $as_echo "$as_me:$LINENO: result: $STRIP" >&5
-$as_echo "$STRIP" >&6; }
+RANLIB=$ac_cv_prog_RANLIB
+if test -n "$RANLIB"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $RANLIB" >&5
+$as_echo "$RANLIB" >&6; }
 else
-  { $as_echo "$as_me:$LINENO: result: no" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
 $as_echo "no" >&6; }
 fi
 
 
 fi
-if test -z "$ac_cv_prog_STRIP"; then
-  ac_ct_STRIP=$STRIP
-  # Extract the first word of "strip", so it can be a program name with args.
-set dummy strip; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+if test -z "$ac_cv_prog_RANLIB"; then
+  ac_ct_RANLIB=$RANLIB
+  # Extract the first word of "ranlib", so it can be a program name with args.
+set dummy ranlib; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 $as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then
+if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
-  if test -n "$ac_ct_STRIP"; then
-  ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.
+  if test -n "$ac_ct_RANLIB"; then
+  ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test.
 else
 as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
 for as_dir in $PATH
 do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
   if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-    ac_cv_prog_ac_ct_STRIP="strip"
-    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    ac_cv_prog_ac_ct_RANLIB="ranlib"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
-done
+  done
 IFS=$as_save_IFS
 
 fi
 fi
-ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
-if test -n "$ac_ct_STRIP"; then
-  { $as_echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5
-$as_echo "$ac_ct_STRIP" >&6; }
+ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB
+if test -n "$ac_ct_RANLIB"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_RANLIB" >&5
+$as_echo "$ac_ct_RANLIB" >&6; }
 else
-  { $as_echo "$as_me:$LINENO: result: no" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
 $as_echo "no" >&6; }
 fi
 
-  if test "x$ac_ct_STRIP" = x; then
-    STRIP=":"
+  if test "x$ac_ct_RANLIB" = x; then
+    RANLIB=":"
   else
     case $cross_compiling:$ac_tool_warned in
 yes:)
-{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
 ac_tool_warned=yes ;;
 esac
-    STRIP=$ac_ct_STRIP
+    RANLIB=$ac_ct_RANLIB
   fi
 else
-  STRIP="$ac_cv_prog_STRIP"
+  RANLIB="$ac_cv_prog_RANLIB"
 fi
 
+test -z "$RANLIB" && RANLIB=:
+
+
+
 
-old_CC="$CC"
-old_CFLAGS="$CFLAGS"
 
-# Set sane defaults for various variables
-test -z "$AR" && AR=ar
-test -z "$AR_FLAGS" && AR_FLAGS=cru
-test -z "$AS" && AS=as
-test -z "$CC" && CC=cc
-test -z "$LTCC" && LTCC=$CC
-test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS
-test -z "$DLLTOOL" && DLLTOOL=dlltool
-test -z "$LD" && LD=ld
-test -z "$LN_S" && LN_S="ln -s"
-test -z "$MAGIC_CMD" && MAGIC_CMD=file
-test -z "$NM" && NM=nm
-test -z "$SED" && SED=sed
-test -z "$OBJDUMP" && OBJDUMP=objdump
-test -z "$RANLIB" && RANLIB=:
-test -z "$STRIP" && STRIP=:
-test -z "$ac_objext" && ac_objext=o
 
 # Determine commands to create old-style static archives.
 old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs'
@@ -7688,1415 +6685,1020 @@
   old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib"
 fi
 
-for cc_temp in $compiler""; do
-  case $cc_temp in
-    compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
-    distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
-    \-*) ;;
-    *) break;;
-  esac
-done
-cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
 
 
-# Only perform the check for file, if the check method requires it
-case $deplibs_check_method in
-file_magic*)
-  if test "$file_magic_cmd" = '$MAGIC_CMD'; then
-    { $as_echo "$as_me:$LINENO: checking for ${ac_tool_prefix}file" >&5
-$as_echo_n "checking for ${ac_tool_prefix}file... " >&6; }
-if test "${lt_cv_path_MAGIC_CMD+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
-  case $MAGIC_CMD in
-[\\/*] |  ?:[\\/]*)
-  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
-  ;;
-*)
-  lt_save_MAGIC_CMD="$MAGIC_CMD"
-  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-  ac_dummy="/usr/bin$PATH_SEPARATOR$PATH"
-  for ac_dir in $ac_dummy; do
-    IFS="$lt_save_ifs"
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/${ac_tool_prefix}file; then
-      lt_cv_path_MAGIC_CMD="$ac_dir/${ac_tool_prefix}file"
-      if test -n "$file_magic_test_file"; then
-	case $deplibs_check_method in
-	"file_magic "*)
-	  file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
-	  MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-	  if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
-	    $EGREP "$file_magic_regex" > /dev/null; then
-	    :
-	  else
-	    cat <<EOF 1>&2
 
-*** Warning: the command libtool uses to detect shared libraries,
-*** $file_magic_cmd, produces output that libtool cannot recognize.
-*** The result is that libtool may fail to recognize shared libraries
-*** as such.  This will affect the creation of libtool libraries that
-*** depend on shared libraries, but programs linked with such libtool
-*** libraries will work regardless of this problem.  Nevertheless, you
-*** may want to report the problem to your system manager and/or to
-*** bug-libtool@gnu.org
 
-EOF
-	  fi ;;
-	esac
-      fi
-      break
-    fi
-  done
-  IFS="$lt_save_ifs"
-  MAGIC_CMD="$lt_save_MAGIC_CMD"
-  ;;
-esac
-fi
 
-MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-if test -n "$MAGIC_CMD"; then
-  { $as_echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5
-$as_echo "$MAGIC_CMD" >&6; }
-else
-  { $as_echo "$as_me:$LINENO: result: no" >&5
-$as_echo "no" >&6; }
-fi
 
-if test -z "$lt_cv_path_MAGIC_CMD"; then
-  if test -n "$ac_tool_prefix"; then
-    { $as_echo "$as_me:$LINENO: checking for file" >&5
-$as_echo_n "checking for file... " >&6; }
-if test "${lt_cv_path_MAGIC_CMD+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
-  case $MAGIC_CMD in
-[\\/*] |  ?:[\\/]*)
-  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
-  ;;
-*)
-  lt_save_MAGIC_CMD="$MAGIC_CMD"
-  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-  ac_dummy="/usr/bin$PATH_SEPARATOR$PATH"
-  for ac_dir in $ac_dummy; do
-    IFS="$lt_save_ifs"
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/file; then
-      lt_cv_path_MAGIC_CMD="$ac_dir/file"
-      if test -n "$file_magic_test_file"; then
-	case $deplibs_check_method in
-	"file_magic "*)
-	  file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
-	  MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-	  if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
-	    $EGREP "$file_magic_regex" > /dev/null; then
-	    :
-	  else
-	    cat <<EOF 1>&2
 
-*** Warning: the command libtool uses to detect shared libraries,
-*** $file_magic_cmd, produces output that libtool cannot recognize.
-*** The result is that libtool may fail to recognize shared libraries
-*** as such.  This will affect the creation of libtool libraries that
-*** depend on shared libraries, but programs linked with such libtool
-*** libraries will work regardless of this problem.  Nevertheless, you
-*** may want to report the problem to your system manager and/or to
-*** bug-libtool@gnu.org
 
-EOF
-	  fi ;;
-	esac
-      fi
-      break
-    fi
-  done
-  IFS="$lt_save_ifs"
-  MAGIC_CMD="$lt_save_MAGIC_CMD"
-  ;;
-esac
-fi
 
-MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-if test -n "$MAGIC_CMD"; then
-  { $as_echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5
-$as_echo "$MAGIC_CMD" >&6; }
-else
-  { $as_echo "$as_me:$LINENO: result: no" >&5
-$as_echo "no" >&6; }
-fi
 
-  else
-    MAGIC_CMD=:
-  fi
-fi
 
-  fi
-  ;;
-esac
 
 
-  case $host_os in
-    rhapsody* | darwin*)
-    if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "${ac_tool_prefix}dsymutil", so it can be a program name with args.
-set dummy ${ac_tool_prefix}dsymutil; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_DSYMUTIL+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$DSYMUTIL"; then
-  ac_cv_prog_DSYMUTIL="$DSYMUTIL" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-    ac_cv_prog_DSYMUTIL="${ac_tool_prefix}dsymutil"
-    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-IFS=$as_save_IFS
 
-fi
-fi
-DSYMUTIL=$ac_cv_prog_DSYMUTIL
-if test -n "$DSYMUTIL"; then
-  { $as_echo "$as_me:$LINENO: result: $DSYMUTIL" >&5
-$as_echo "$DSYMUTIL" >&6; }
-else
-  { $as_echo "$as_me:$LINENO: result: no" >&5
-$as_echo "no" >&6; }
-fi
 
 
-fi
-if test -z "$ac_cv_prog_DSYMUTIL"; then
-  ac_ct_DSYMUTIL=$DSYMUTIL
-  # Extract the first word of "dsymutil", so it can be a program name with args.
-set dummy dsymutil; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_ac_ct_DSYMUTIL+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$ac_ct_DSYMUTIL"; then
-  ac_cv_prog_ac_ct_DSYMUTIL="$ac_ct_DSYMUTIL" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-    ac_cv_prog_ac_ct_DSYMUTIL="dsymutil"
-    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-IFS=$as_save_IFS
 
-fi
-fi
-ac_ct_DSYMUTIL=$ac_cv_prog_ac_ct_DSYMUTIL
-if test -n "$ac_ct_DSYMUTIL"; then
-  { $as_echo "$as_me:$LINENO: result: $ac_ct_DSYMUTIL" >&5
-$as_echo "$ac_ct_DSYMUTIL" >&6; }
-else
-  { $as_echo "$as_me:$LINENO: result: no" >&5
-$as_echo "no" >&6; }
-fi
 
-  if test "x$ac_ct_DSYMUTIL" = x; then
-    DSYMUTIL=":"
-  else
-    case $cross_compiling:$ac_tool_warned in
-yes:)
-{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5
-$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
-ac_tool_warned=yes ;;
-esac
-    DSYMUTIL=$ac_ct_DSYMUTIL
-  fi
-else
-  DSYMUTIL="$ac_cv_prog_DSYMUTIL"
-fi
 
-    if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "${ac_tool_prefix}nmedit", so it can be a program name with args.
-set dummy ${ac_tool_prefix}nmedit; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_NMEDIT+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$NMEDIT"; then
-  ac_cv_prog_NMEDIT="$NMEDIT" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-    ac_cv_prog_NMEDIT="${ac_tool_prefix}nmedit"
-    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-IFS=$as_save_IFS
 
-fi
-fi
-NMEDIT=$ac_cv_prog_NMEDIT
-if test -n "$NMEDIT"; then
-  { $as_echo "$as_me:$LINENO: result: $NMEDIT" >&5
-$as_echo "$NMEDIT" >&6; }
-else
-  { $as_echo "$as_me:$LINENO: result: no" >&5
-$as_echo "no" >&6; }
-fi
 
 
-fi
-if test -z "$ac_cv_prog_NMEDIT"; then
-  ac_ct_NMEDIT=$NMEDIT
-  # Extract the first word of "nmedit", so it can be a program name with args.
-set dummy nmedit; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_ac_ct_NMEDIT+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$ac_ct_NMEDIT"; then
-  ac_cv_prog_ac_ct_NMEDIT="$ac_ct_NMEDIT" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-    ac_cv_prog_ac_ct_NMEDIT="nmedit"
-    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-IFS=$as_save_IFS
 
-fi
-fi
-ac_ct_NMEDIT=$ac_cv_prog_ac_ct_NMEDIT
-if test -n "$ac_ct_NMEDIT"; then
-  { $as_echo "$as_me:$LINENO: result: $ac_ct_NMEDIT" >&5
-$as_echo "$ac_ct_NMEDIT" >&6; }
-else
-  { $as_echo "$as_me:$LINENO: result: no" >&5
-$as_echo "no" >&6; }
-fi
 
-  if test "x$ac_ct_NMEDIT" = x; then
-    NMEDIT=":"
-  else
-    case $cross_compiling:$ac_tool_warned in
-yes:)
-{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5
-$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
-ac_tool_warned=yes ;;
-esac
-    NMEDIT=$ac_ct_NMEDIT
-  fi
-else
-  NMEDIT="$ac_cv_prog_NMEDIT"
-fi
 
 
-    { $as_echo "$as_me:$LINENO: checking for -single_module linker flag" >&5
-$as_echo_n "checking for -single_module linker flag... " >&6; }
-if test "${lt_cv_apple_cc_single_mod+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
-  lt_cv_apple_cc_single_mod=no
-      if test -z "${LT_MULTI_MODULE}"; then
-   # By default we will add the -single_module flag. You can override
-   # by either setting the environment variable LT_MULTI_MODULE
-   # non-empty at configure time, or by adding -multi_module to the
-   # link flags.
-   echo "int foo(void){return 1;}" > conftest.c
-   $LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
-     -dynamiclib ${wl}-single_module conftest.c
-   if test -f libconftest.dylib; then
-     lt_cv_apple_cc_single_mod=yes
-     rm -rf libconftest.dylib*
-   fi
-   rm conftest.c
-      fi
-fi
-{ $as_echo "$as_me:$LINENO: result: $lt_cv_apple_cc_single_mod" >&5
-$as_echo "$lt_cv_apple_cc_single_mod" >&6; }
-    { $as_echo "$as_me:$LINENO: checking for -exported_symbols_list linker flag" >&5
-$as_echo_n "checking for -exported_symbols_list linker flag... " >&6; }
-if test "${lt_cv_ld_exported_symbols_list+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
-  lt_cv_ld_exported_symbols_list=no
-      save_LDFLAGS=$LDFLAGS
-      echo "_main" > conftest.sym
-      LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym"
-      cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
 
-int
-main ()
-{
 
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_link") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest$ac_exeext && {
-	 test "$cross_compiling" = yes ||
-	 $as_test_x conftest$ac_exeext
-       }; then
-  lt_cv_ld_exported_symbols_list=yes
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
 
-	lt_cv_ld_exported_symbols_list=no
-fi
 
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-      conftest$ac_exeext conftest.$ac_ext
-   LDFLAGS="$save_LDFLAGS"
 
-fi
-{ $as_echo "$as_me:$LINENO: result: $lt_cv_ld_exported_symbols_list" >&5
-$as_echo "$lt_cv_ld_exported_symbols_list" >&6; }
-    case $host_os in
-    rhapsody* | darwin1.[0123])
-      _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;;
-    darwin1.*)
-     _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
-    darwin*)
-      # if running on 10.5 or later, the deployment target defaults
-      # to the OS version, if on x86, and 10.4, the deployment
-      # target defaults to 10.4. Don't you love it?
-      case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in
-   10.0,*86*-darwin8*|10.0,*-darwin[91]*)
-     _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
-   10.[012]*)
-     _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
-   10.*)
-     _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
-      esac
-    ;;
-  esac
-    if test "$lt_cv_apple_cc_single_mod" = "yes"; then
-      _lt_dar_single_mod='$single_module'
-    fi
-    if test "$lt_cv_ld_exported_symbols_list" = "yes"; then
-      _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym'
-    else
-      _lt_dar_export_syms="~$NMEDIT -s \$output_objdir/\${libname}-symbols.expsym \${lib}"
-    fi
-    if test "$DSYMUTIL" != ":"; then
-      _lt_dsymutil="~$DSYMUTIL \$lib || :"
-    else
-      _lt_dsymutil=
-    fi
-    ;;
-  esac
 
 
-enable_dlopen=no
-enable_win32_dll=yes
+# If no C compiler was specified, use CC.
+LTCC=${LTCC-"$CC"}
 
-# Check whether --enable-libtool-lock was given.
-if test "${enable_libtool_lock+set}" = set; then
-  enableval=$enable_libtool_lock;
-fi
+# If no C compiler flags were specified, use CFLAGS.
+LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
 
-test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
+# Allow CC to be a program name with arguments.
+compiler=$CC
 
 
-# Check whether --with-pic was given.
-if test "${with_pic+set}" = set; then
-  withval=$with_pic; pic_mode="$withval"
+# Check for command to grab the raw symbol name followed by C symbol from nm.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking command to parse $NM output from $compiler object" >&5
+$as_echo_n "checking command to parse $NM output from $compiler object... " >&6; }
+if test "${lt_cv_sys_global_symbol_pipe+set}" = set; then :
+  $as_echo_n "(cached) " >&6
 else
-  pic_mode=default
-fi
 
-test -z "$pic_mode" && pic_mode=default
+# These are sane defaults that work on at least a few old systems.
+# [They come from Ultrix.  What could be older than Ultrix?!! ;)]
 
-# Use C for the default configuration in the libtool script
-tagname=
-lt_save_CC="$CC"
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
+# Character class describing NM global symbol codes.
+symcode='[BCDEGRST]'
 
+# Regexp to match symbols that can be accessed directly from C.
+sympat='\([_A-Za-z][_A-Za-z0-9]*\)'
 
-# Source file extension for C test sources.
-ac_ext=c
+# Define system-specific variables.
+case $host_os in
+aix*)
+  symcode='[BCDT]'
+  ;;
+cygwin* | mingw* | pw32* | cegcc*)
+  symcode='[ABCDGISTW]'
+  ;;
+hpux*)
+  if test "$host_cpu" = ia64; then
+    symcode='[ABCDEGRST]'
+  fi
+  ;;
+irix* | nonstopux*)
+  symcode='[BCDEGRST]'
+  ;;
+osf*)
+  symcode='[BCDEGQRST]'
+  ;;
+solaris*)
+  symcode='[BDRT]'
+  ;;
+sco3.2v5*)
+  symcode='[DT]'
+  ;;
+sysv4.2uw2*)
+  symcode='[DT]'
+  ;;
+sysv5* | sco5v6* | unixware* | OpenUNIX*)
+  symcode='[ABDT]'
+  ;;
+sysv4)
+  symcode='[DFNSTU]'
+  ;;
+esac
 
-# Object file extension for compiled C test sources.
-objext=o
-objext=$objext
+# If we're using GNU nm, then use its standard symbol codes.
+case `$NM -V 2>&1` in
+*GNU* | *'with BFD'*)
+  symcode='[ABCDGIRSTW]' ;;
+esac
 
-# Code to be used in simple compile tests
-lt_simple_compile_test_code="int some_variable = 0;"
+# Transform an extracted symbol line into a proper C declaration.
+# Some systems (esp. on ia64) link data and code symbols differently,
+# so use this general approach.
+lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
 
-# Code to be used in simple link tests
-lt_simple_link_test_code='int main(){return(0);}'
+# Transform an extracted symbol line into symbol name and symbol address
+lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/  {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/  {\"\2\", (void *) \&\2},/p'"
+lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([^ ]*\) $/  {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \(lib[^ ]*\)$/  {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/  {\"lib\2\", (void *) \&\2},/p'"
 
+# Handle CRLF in mingw tool chain
+opt_cr=
+case $build_os in
+mingw*)
+  opt_cr=`$ECHO 'x\{0,1\}' | tr x '\015'` # option cr in regexp
+  ;;
+esac
 
-# If no C compiler was specified, use CC.
-LTCC=${LTCC-"$CC"}
+# Try without a prefix underscore, then with it.
+for ac_symprfx in "" "_"; do
 
-# If no C compiler flags were specified, use CFLAGS.
-LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
+  # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol.
+  symxfrm="\\1 $ac_symprfx\\2 \\2"
 
-# Allow CC to be a program name with arguments.
-compiler=$CC
+  # Write the raw and C identifiers.
+  if test "$lt_cv_nm_interface" = "MS dumpbin"; then
+    # Fake it for dumpbin and say T for any non-static function
+    # and D for any global variable.
+    # Also find C++ and __fastcall symbols from MSVC++,
+    # which start with @ or ?.
+    lt_cv_sys_global_symbol_pipe="$AWK '"\
+"     {last_section=section; section=\$ 3};"\
+"     /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\
+"     \$ 0!~/External *\|/{next};"\
+"     / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\
+"     {if(hide[section]) next};"\
+"     {f=0}; \$ 0~/\(\).*\|/{f=1}; {printf f ? \"T \" : \"D \"};"\
+"     {split(\$ 0, a, /\||\r/); split(a[2], s)};"\
+"     s[1]~/^[@?]/{print s[1], s[1]; next};"\
+"     s[1]~prfx {split(s[1],t,\"@\"); print t[1], substr(t[1],length(prfx))}"\
+"     ' prfx=^$ac_symprfx"
+  else
+    lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[	 ]\($symcode$symcode*\)[	 ][	 ]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'"
+  fi
 
+  # Check to see that the pipe works correctly.
+  pipe_works=no
 
-# save warnings/boilerplate of simple test code
-ac_outfile=conftest.$ac_objext
-echo "$lt_simple_compile_test_code" >conftest.$ac_ext
-eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
-_lt_compiler_boilerplate=`cat conftest.err`
-$rm conftest*
+  rm -f conftest*
+  cat > conftest.$ac_ext <<_LT_EOF
+#ifdef __cplusplus
+extern "C" {
+#endif
+char nm_test_var;
+void nm_test_func(void);
+void nm_test_func(void){}
+#ifdef __cplusplus
+}
+#endif
+int main(){nm_test_var='a';nm_test_func();return(0);}
+_LT_EOF
 
-ac_outfile=conftest.$ac_objext
-echo "$lt_simple_link_test_code" >conftest.$ac_ext
-eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
-_lt_linker_boilerplate=`cat conftest.err`
-$rm -r conftest*
+  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
+    # Now try to grab the symbols.
+    nlist=conftest.nm
+    if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist\""; } >&5
+  (eval $NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } && test -s "$nlist"; then
+      # Try sorting and uniquifying the output.
+      if sort "$nlist" | uniq > "$nlist"T; then
+	mv -f "$nlist"T "$nlist"
+      else
+	rm -f "$nlist"T
+      fi
 
+      # Make sure that we snagged all the symbols we need.
+      if $GREP ' nm_test_var$' "$nlist" >/dev/null; then
+	if $GREP ' nm_test_func$' "$nlist" >/dev/null; then
+	  cat <<_LT_EOF > conftest.$ac_ext
+#ifdef __cplusplus
+extern "C" {
+#endif
 
+_LT_EOF
+	  # Now generate the symbol file.
+	  eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | $GREP -v main >> conftest.$ac_ext'
 
-lt_prog_compiler_no_builtin_flag=
+	  cat <<_LT_EOF >> conftest.$ac_ext
 
-if test "$GCC" = yes; then
-  lt_prog_compiler_no_builtin_flag=' -fno-builtin'
+/* The mapping between symbol names and symbols.  */
+const struct {
+  const char *name;
+  void       *address;
+}
+lt__PROGRAM__LTX_preloaded_symbols[] =
+{
+  { "@PROGRAM@", (void *) 0 },
+_LT_EOF
+	  $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/  {\"\2\", (void *) \&\2},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext
+	  cat <<\_LT_EOF >> conftest.$ac_ext
+  {0, (void *) 0}
+};
 
+/* This works around a problem in FreeBSD linker */
+#ifdef FREEBSD_WORKAROUND
+static const void *lt_preloaded_setup() {
+  return lt__PROGRAM__LTX_preloaded_symbols;
+}
+#endif
 
-{ $as_echo "$as_me:$LINENO: checking if $compiler supports -fno-rtti -fno-exceptions" >&5
-$as_echo_n "checking if $compiler supports -fno-rtti -fno-exceptions... " >&6; }
-if test "${lt_cv_prog_compiler_rtti_exceptions+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
-  lt_cv_prog_compiler_rtti_exceptions=no
-  ac_outfile=conftest.$ac_objext
-   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
-   lt_compiler_flag="-fno-rtti -fno-exceptions"
-   # Insert the option either (1) after the last *FLAGS variable, or
-   # (2) before a word containing "conftest.", or (3) at the end.
-   # Note that $ac_compile itself does not contain backslashes and begins
-   # with a dollar sign (not a hyphen), so the echo should work correctly.
-   # The option is referenced via a variable to avoid confusing sed.
-   lt_compile=`echo "$ac_compile" | $SED \
-   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-   -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:8238: $lt_compile\"" >&5)
-   (eval "$lt_compile" 2>conftest.err)
-   ac_status=$?
-   cat conftest.err >&5
-   echo "$as_me:8242: \$? = $ac_status" >&5
-   if (exit $ac_status) && test -s "$ac_outfile"; then
-     # The compiler can only warn and ignore the option if not recognized
-     # So say no if there are warnings other than the usual output.
-     $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
-     $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
-     if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
-       lt_cv_prog_compiler_rtti_exceptions=yes
-     fi
-   fi
-   $rm conftest*
+#ifdef __cplusplus
+}
+#endif
+_LT_EOF
+	  # Now try linking the two files.
+	  mv conftest.$ac_objext conftstm.$ac_objext
+	  lt_save_LIBS="$LIBS"
+	  lt_save_CFLAGS="$CFLAGS"
+	  LIBS="conftstm.$ac_objext"
+	  CFLAGS="$CFLAGS$lt_prog_compiler_no_builtin_flag"
+	  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5
+  (eval $ac_link) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } && test -s conftest${ac_exeext}; then
+	    pipe_works=yes
+	  fi
+	  LIBS="$lt_save_LIBS"
+	  CFLAGS="$lt_save_CFLAGS"
+	else
+	  echo "cannot find nm_test_func in $nlist" >&5
+	fi
+      else
+	echo "cannot find nm_test_var in $nlist" >&5
+      fi
+    else
+      echo "cannot run $lt_cv_sys_global_symbol_pipe" >&5
+    fi
+  else
+    echo "$progname: failed program was:" >&5
+    cat conftest.$ac_ext >&5
+  fi
+  rm -rf conftest* conftst*
+
+  # Do not use the global_symbol_pipe unless it works.
+  if test "$pipe_works" = yes; then
+    break
+  else
+    lt_cv_sys_global_symbol_pipe=
+  fi
+done
 
 fi
-{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_rtti_exceptions" >&5
-$as_echo "$lt_cv_prog_compiler_rtti_exceptions" >&6; }
 
-if test x"$lt_cv_prog_compiler_rtti_exceptions" = xyes; then
-    lt_prog_compiler_no_builtin_flag="$lt_prog_compiler_no_builtin_flag -fno-rtti -fno-exceptions"
+if test -z "$lt_cv_sys_global_symbol_pipe"; then
+  lt_cv_sys_global_symbol_to_cdecl=
+fi
+if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: failed" >&5
+$as_echo "failed" >&6; }
 else
-    :
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: ok" >&5
+$as_echo "ok" >&6; }
 fi
 
-fi
 
-lt_prog_compiler_wl=
-lt_prog_compiler_pic=
-lt_prog_compiler_static=
 
-{ $as_echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5
-$as_echo_n "checking for $compiler option to produce PIC... " >&6; }
 
-  if test "$GCC" = yes; then
-    lt_prog_compiler_wl='-Wl,'
-    lt_prog_compiler_static='-static'
 
-    case $host_os in
-      aix*)
-      # All AIX code is PIC.
-      if test "$host_cpu" = ia64; then
-	# AIX 5 now supports IA64 processor
-	lt_prog_compiler_static='-Bstatic'
-      fi
-      ;;
 
-    amigaos*)
-      # FIXME: we need at least 68020 code to build shared libraries, but
-      # adding the `-m68020' flag to GCC prevents building anything better,
-      # like `-m68040'.
-      lt_prog_compiler_pic='-m68020 -resident32 -malways-restore-a4'
-      ;;
 
-    beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
-      # PIC is the default for these OSes.
-      ;;
 
-    mingw* | cygwin* | pw32* | os2*)
-      # This hack is so that the source file can tell whether it is being
-      # built for inclusion in a dll (and should export symbols for example).
-      # Although the cygwin gcc ignores -fPIC, still need this for old-style
-      # (--disable-auto-import) libraries
-      lt_prog_compiler_pic='-DDLL_EXPORT'
-      ;;
 
-    darwin* | rhapsody*)
-      # PIC is the default on this platform
-      # Common symbols not allowed in MH_DYLIB files
-      lt_prog_compiler_pic='-fno-common'
-      ;;
 
-    interix[3-9]*)
-      # Interix 3.x gcc -fpic/-fPIC options generate broken code.
-      # Instead, we relocate shared libraries at runtime.
-      ;;
 
-    msdosdjgpp*)
-      # Just because we use GCC doesn't mean we suddenly get shared libraries
-      # on systems that don't support them.
-      lt_prog_compiler_can_build_shared=no
-      enable_shared=no
-      ;;
 
-    sysv4*MP*)
-      if test -d /usr/nec; then
-	lt_prog_compiler_pic=-Kconform_pic
-      fi
-      ;;
 
-    hpux*)
-      # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
-      # not for PA HP-UX.
-      case $host_cpu in
-      hppa*64*|ia64*)
-	# +Z the default
-	;;
-      *)
-	lt_prog_compiler_pic='-fPIC'
-	;;
-      esac
-      ;;
 
-    *)
-      lt_prog_compiler_pic='-fPIC'
-      ;;
-    esac
-  else
-    # PORTME Check for flag to pass linker flags through the system compiler.
-    case $host_os in
-    aix*)
-      lt_prog_compiler_wl='-Wl,'
-      if test "$host_cpu" = ia64; then
-	# AIX 5 now supports IA64 processor
-	lt_prog_compiler_static='-Bstatic'
-      else
-	lt_prog_compiler_static='-bnso -bI:/lib/syscalls.exp'
-      fi
-      ;;
-      darwin*)
-        # PIC is the default on this platform
-        # Common symbols not allowed in MH_DYLIB files
-       case $cc_basename in
-         xlc*)
-         lt_prog_compiler_pic='-qnocommon'
-         lt_prog_compiler_wl='-Wl,'
-         ;;
-       esac
-       ;;
 
-    mingw* | cygwin* | pw32* | os2*)
-      # This hack is so that the source file can tell whether it is being
-      # built for inclusion in a dll (and should export symbols for example).
-      lt_prog_compiler_pic='-DDLL_EXPORT'
-      ;;
 
-    hpux9* | hpux10* | hpux11*)
-      lt_prog_compiler_wl='-Wl,'
-      # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
-      # not for PA HP-UX.
-      case $host_cpu in
-      hppa*64*|ia64*)
-	# +Z the default
-	;;
-      *)
-	lt_prog_compiler_pic='+Z'
-	;;
-      esac
-      # Is there a better lt_prog_compiler_static that works with the bundled CC?
-      lt_prog_compiler_static='${wl}-a ${wl}archive'
-      ;;
 
-    irix5* | irix6* | nonstopux*)
-      lt_prog_compiler_wl='-Wl,'
-      # PIC (with -KPIC) is the default.
-      lt_prog_compiler_static='-non_shared'
-      ;;
 
-    newsos6)
-      lt_prog_compiler_pic='-KPIC'
-      lt_prog_compiler_static='-Bstatic'
-      ;;
 
-    linux* | k*bsd*-gnu)
-      case $cc_basename in
-      icc* | ecc*)
-	lt_prog_compiler_wl='-Wl,'
-	lt_prog_compiler_pic='-KPIC'
-	lt_prog_compiler_static='-static'
-        ;;
-      pgcc* | pgf77* | pgf90* | pgf95*)
-        # Portland Group compilers (*not* the Pentium gcc compiler,
-	# which looks to be a dead project)
-	lt_prog_compiler_wl='-Wl,'
-	lt_prog_compiler_pic='-fpic'
-	lt_prog_compiler_static='-Bstatic'
-        ;;
-      ccc*)
-        lt_prog_compiler_wl='-Wl,'
-        # All Alpha code is PIC.
-        lt_prog_compiler_static='-non_shared'
-        ;;
-      *)
-        case `$CC -V 2>&1 | sed 5q` in
-	*Sun\ C*)
-	  # Sun C 5.9
-	  lt_prog_compiler_pic='-KPIC'
-	  lt_prog_compiler_static='-Bstatic'
-	  lt_prog_compiler_wl='-Wl,'
+
+
+
+
+# Check whether --enable-libtool-lock was given.
+if test "${enable_libtool_lock+set}" = set; then :
+  enableval=$enable_libtool_lock;
+fi
+
+test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
+
+# Some flags need to be propagated to the compiler or linker for good
+# libtool support.
+case $host in
+ia64-*-hpux*)
+  # Find out which ABI we are using.
+  echo 'int i;' > conftest.$ac_ext
+  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
+    case `/usr/bin/file conftest.$ac_objext` in
+      *ELF-32*)
+	HPUX_IA64_MODE="32"
+	;;
+      *ELF-64*)
+	HPUX_IA64_MODE="64"
+	;;
+    esac
+  fi
+  rm -rf conftest*
+  ;;
+*-*-irix6*)
+  # Find out which ABI we are using.
+  echo '#line 7012 "configure"' > conftest.$ac_ext
+  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
+    if test "$lt_cv_prog_gnu_ld" = yes; then
+      case `/usr/bin/file conftest.$ac_objext` in
+	*32-bit*)
+	  LD="${LD-ld} -melf32bsmip"
 	  ;;
-	*Sun\ F*)
-	  # Sun Fortran 8.3 passes all unrecognized flags to the linker
-	  lt_prog_compiler_pic='-KPIC'
-	  lt_prog_compiler_static='-Bstatic'
-	  lt_prog_compiler_wl=''
+	*N32*)
+	  LD="${LD-ld} -melf32bmipn32"
 	  ;;
-	esac
+	*64-bit*)
+	  LD="${LD-ld} -melf64bmip"
 	;;
       esac
-      ;;
-
-    osf3* | osf4* | osf5*)
-      lt_prog_compiler_wl='-Wl,'
-      # All OSF/1 code is PIC.
-      lt_prog_compiler_static='-non_shared'
-      ;;
-
-    rdos*)
-      lt_prog_compiler_static='-non_shared'
-      ;;
-
-    solaris*)
-      lt_prog_compiler_pic='-KPIC'
-      lt_prog_compiler_static='-Bstatic'
-      case $cc_basename in
-      f77* | f90* | f95*)
-	lt_prog_compiler_wl='-Qoption ld ';;
-      *)
-	lt_prog_compiler_wl='-Wl,';;
+    else
+      case `/usr/bin/file conftest.$ac_objext` in
+	*32-bit*)
+	  LD="${LD-ld} -32"
+	  ;;
+	*N32*)
+	  LD="${LD-ld} -n32"
+	  ;;
+	*64-bit*)
+	  LD="${LD-ld} -64"
+	  ;;
       esac
-      ;;
-
-    sunos4*)
-      lt_prog_compiler_wl='-Qoption ld '
-      lt_prog_compiler_pic='-PIC'
-      lt_prog_compiler_static='-Bstatic'
-      ;;
+    fi
+  fi
+  rm -rf conftest*
+  ;;
 
-    sysv4 | sysv4.2uw2* | sysv4.3*)
-      lt_prog_compiler_wl='-Wl,'
-      lt_prog_compiler_pic='-KPIC'
-      lt_prog_compiler_static='-Bstatic'
-      ;;
+x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \
+s390*-*linux*|s390*-*tpf*|sparc*-*linux*)
+  # Find out which ABI we are using.
+  echo 'int i;' > conftest.$ac_ext
+  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
+    case `/usr/bin/file conftest.o` in
+      *32-bit*)
+	case $host in
+	  x86_64-*kfreebsd*-gnu)
+	    LD="${LD-ld} -m elf_i386_fbsd"
+	    ;;
+	  x86_64-*linux*)
+	    LD="${LD-ld} -m elf_i386"
+	    ;;
+	  ppc64-*linux*|powerpc64-*linux*)
+	    LD="${LD-ld} -m elf32ppclinux"
+	    ;;
+	  s390x-*linux*)
+	    LD="${LD-ld} -m elf_s390"
+	    ;;
+	  sparc64-*linux*)
+	    LD="${LD-ld} -m elf32_sparc"
+	    ;;
+	esac
+	;;
+      *64-bit*)
+	case $host in
+	  x86_64-*kfreebsd*-gnu)
+	    LD="${LD-ld} -m elf_x86_64_fbsd"
+	    ;;
+	  x86_64-*linux*)
+	    LD="${LD-ld} -m elf_x86_64"
+	    ;;
+	  ppc*-*linux*|powerpc*-*linux*)
+	    LD="${LD-ld} -m elf64ppc"
+	    ;;
+	  s390*-*linux*|s390*-*tpf*)
+	    LD="${LD-ld} -m elf64_s390"
+	    ;;
+	  sparc*-*linux*)
+	    LD="${LD-ld} -m elf64_sparc"
+	    ;;
+	esac
+	;;
+    esac
+  fi
+  rm -rf conftest*
+  ;;
 
-    sysv4*MP*)
-      if test -d /usr/nec ;then
-	lt_prog_compiler_pic='-Kconform_pic'
-	lt_prog_compiler_static='-Bstatic'
-      fi
-      ;;
+*-*-sco3.2v5*)
+  # On SCO OpenServer 5, we need -belf to get full-featured binaries.
+  SAVE_CFLAGS="$CFLAGS"
+  CFLAGS="$CFLAGS -belf"
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler needs -belf" >&5
+$as_echo_n "checking whether the C compiler needs -belf... " >&6; }
+if test "${lt_cv_cc_needs_belf+set}" = set; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
 
-    sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
-      lt_prog_compiler_wl='-Wl,'
-      lt_prog_compiler_pic='-KPIC'
-      lt_prog_compiler_static='-Bstatic'
-      ;;
+     cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
 
-    unicos*)
-      lt_prog_compiler_wl='-Wl,'
-      lt_prog_compiler_can_build_shared=no
-      ;;
+int
+main ()
+{
 
-    uts4*)
-      lt_prog_compiler_pic='-pic'
-      lt_prog_compiler_static='-Bstatic'
-      ;;
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  lt_cv_cc_needs_belf=yes
+else
+  lt_cv_cc_needs_belf=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+     ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
 
-    *)
-      lt_prog_compiler_can_build_shared=no
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_cc_needs_belf" >&5
+$as_echo "$lt_cv_cc_needs_belf" >&6; }
+  if test x"$lt_cv_cc_needs_belf" != x"yes"; then
+    # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
+    CFLAGS="$SAVE_CFLAGS"
+  fi
+  ;;
+sparc*-*solaris*)
+  # Find out which ABI we are using.
+  echo 'int i;' > conftest.$ac_ext
+  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
+    case `/usr/bin/file conftest.o` in
+    *64-bit*)
+      case $lt_cv_prog_gnu_ld in
+      yes*) LD="${LD-ld} -m elf64_sparc" ;;
+      *)
+	if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then
+	  LD="${LD-ld} -64"
+	fi
+	;;
+      esac
       ;;
     esac
   fi
+  rm -rf conftest*
+  ;;
+esac
 
-{ $as_echo "$as_me:$LINENO: result: $lt_prog_compiler_pic" >&5
-$as_echo "$lt_prog_compiler_pic" >&6; }
+need_locks="$enable_libtool_lock"
 
-#
-# Check to make sure the PIC flag actually works.
-#
-if test -n "$lt_prog_compiler_pic"; then
 
-{ $as_echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic works" >&5
-$as_echo_n "checking if $compiler PIC flag $lt_prog_compiler_pic works... " >&6; }
-if test "${lt_cv_prog_compiler_pic_works+set}" = set; then
+  case $host_os in
+    rhapsody* | darwin*)
+    if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}dsymutil", so it can be a program name with args.
+set dummy ${ac_tool_prefix}dsymutil; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_DSYMUTIL+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
-  lt_cv_prog_compiler_pic_works=no
-  ac_outfile=conftest.$ac_objext
-   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
-   lt_compiler_flag="$lt_prog_compiler_pic -DPIC"
-   # Insert the option either (1) after the last *FLAGS variable, or
-   # (2) before a word containing "conftest.", or (3) at the end.
-   # Note that $ac_compile itself does not contain backslashes and begins
-   # with a dollar sign (not a hyphen), so the echo should work correctly.
-   # The option is referenced via a variable to avoid confusing sed.
-   lt_compile=`echo "$ac_compile" | $SED \
-   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-   -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:8528: $lt_compile\"" >&5)
-   (eval "$lt_compile" 2>conftest.err)
-   ac_status=$?
-   cat conftest.err >&5
-   echo "$as_me:8532: \$? = $ac_status" >&5
-   if (exit $ac_status) && test -s "$ac_outfile"; then
-     # The compiler can only warn and ignore the option if not recognized
-     # So say no if there are warnings other than the usual output.
-     $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
-     $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
-     if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
-       lt_cv_prog_compiler_pic_works=yes
-     fi
-   fi
-   $rm conftest*
+  if test -n "$DSYMUTIL"; then
+  ac_cv_prog_DSYMUTIL="$DSYMUTIL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_DSYMUTIL="${ac_tool_prefix}dsymutil"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
 
 fi
-{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_pic_works" >&5
-$as_echo "$lt_cv_prog_compiler_pic_works" >&6; }
-
-if test x"$lt_cv_prog_compiler_pic_works" = xyes; then
-    case $lt_prog_compiler_pic in
-     "" | " "*) ;;
-     *) lt_prog_compiler_pic=" $lt_prog_compiler_pic" ;;
-     esac
+fi
+DSYMUTIL=$ac_cv_prog_DSYMUTIL
+if test -n "$DSYMUTIL"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DSYMUTIL" >&5
+$as_echo "$DSYMUTIL" >&6; }
 else
-    lt_prog_compiler_pic=
-     lt_prog_compiler_can_build_shared=no
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
 fi
 
-fi
-case $host_os in
-  # For platforms which do not support PIC, -DPIC is meaningless:
-  *djgpp*)
-    lt_prog_compiler_pic=
-    ;;
-  *)
-    lt_prog_compiler_pic="$lt_prog_compiler_pic -DPIC"
-    ;;
-esac
 
-#
-# Check to make sure the static flag actually works.
-#
-wl=$lt_prog_compiler_wl eval lt_tmp_static_flag=\"$lt_prog_compiler_static\"
-{ $as_echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5
-$as_echo_n "checking if $compiler static flag $lt_tmp_static_flag works... " >&6; }
-if test "${lt_cv_prog_compiler_static_works+set}" = set; then
+fi
+if test -z "$ac_cv_prog_DSYMUTIL"; then
+  ac_ct_DSYMUTIL=$DSYMUTIL
+  # Extract the first word of "dsymutil", so it can be a program name with args.
+set dummy dsymutil; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_ac_ct_DSYMUTIL+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
-  lt_cv_prog_compiler_static_works=no
-   save_LDFLAGS="$LDFLAGS"
-   LDFLAGS="$LDFLAGS $lt_tmp_static_flag"
-   echo "$lt_simple_link_test_code" > conftest.$ac_ext
-   if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
-     # The linker can only warn and ignore the option if not recognized
-     # So say no if there are warnings
-     if test -s conftest.err; then
-       # Append any errors to the config.log.
-       cat conftest.err 1>&5
-       $echo "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp
-       $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
-       if diff conftest.exp conftest.er2 >/dev/null; then
-         lt_cv_prog_compiler_static_works=yes
-       fi
-     else
-       lt_cv_prog_compiler_static_works=yes
-     fi
-   fi
-   $rm -r conftest*
-   LDFLAGS="$save_LDFLAGS"
+  if test -n "$ac_ct_DSYMUTIL"; then
+  ac_cv_prog_ac_ct_DSYMUTIL="$ac_ct_DSYMUTIL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_DSYMUTIL="dsymutil"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
 
 fi
-{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_static_works" >&5
-$as_echo "$lt_cv_prog_compiler_static_works" >&6; }
-
-if test x"$lt_cv_prog_compiler_static_works" = xyes; then
-    :
+fi
+ac_ct_DSYMUTIL=$ac_cv_prog_ac_ct_DSYMUTIL
+if test -n "$ac_ct_DSYMUTIL"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DSYMUTIL" >&5
+$as_echo "$ac_ct_DSYMUTIL" >&6; }
 else
-    lt_prog_compiler_static=
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
 fi
 
+  if test "x$ac_ct_DSYMUTIL" = x; then
+    DSYMUTIL=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    DSYMUTIL=$ac_ct_DSYMUTIL
+  fi
+else
+  DSYMUTIL="$ac_cv_prog_DSYMUTIL"
+fi
 
-{ $as_echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5
-$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; }
-if test "${lt_cv_prog_compiler_c_o+set}" = set; then
+    if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}nmedit", so it can be a program name with args.
+set dummy ${ac_tool_prefix}nmedit; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_NMEDIT+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
-  lt_cv_prog_compiler_c_o=no
-   $rm -r conftest 2>/dev/null
-   mkdir conftest
-   cd conftest
-   mkdir out
-   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
-
-   lt_compiler_flag="-o out/conftest2.$ac_objext"
-   # Insert the option either (1) after the last *FLAGS variable, or
-   # (2) before a word containing "conftest.", or (3) at the end.
-   # Note that $ac_compile itself does not contain backslashes and begins
-   # with a dollar sign (not a hyphen), so the echo should work correctly.
-   lt_compile=`echo "$ac_compile" | $SED \
-   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-   -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:8632: $lt_compile\"" >&5)
-   (eval "$lt_compile" 2>out/conftest.err)
-   ac_status=$?
-   cat out/conftest.err >&5
-   echo "$as_me:8636: \$? = $ac_status" >&5
-   if (exit $ac_status) && test -s out/conftest2.$ac_objext
-   then
-     # The compiler can only warn and ignore the option if not recognized
-     # So say no if there are warnings
-     $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
-     $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
-     if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
-       lt_cv_prog_compiler_c_o=yes
-     fi
-   fi
-   chmod u+w . 2>&5
-   $rm conftest*
-   # SGI C++ compiler will create directory out/ii_files/ for
-   # template instantiation
-   test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files
-   $rm out/* && rmdir out
-   cd ..
-   rmdir conftest
-   $rm conftest*
+  if test -n "$NMEDIT"; then
+  ac_cv_prog_NMEDIT="$NMEDIT" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_NMEDIT="${ac_tool_prefix}nmedit"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
 
 fi
-{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o" >&5
-$as_echo "$lt_cv_prog_compiler_c_o" >&6; }
+fi
+NMEDIT=$ac_cv_prog_NMEDIT
+if test -n "$NMEDIT"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $NMEDIT" >&5
+$as_echo "$NMEDIT" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
 
 
-hard_links="nottested"
-if test "$lt_cv_prog_compiler_c_o" = no && test "$need_locks" != no; then
-  # do not overwrite the value of need_locks provided by the user
-  { $as_echo "$as_me:$LINENO: checking if we can lock with hard links" >&5
-$as_echo_n "checking if we can lock with hard links... " >&6; }
-  hard_links=yes
-  $rm conftest*
-  ln conftest.a conftest.b 2>/dev/null && hard_links=no
-  touch conftest.a
-  ln conftest.a conftest.b 2>&5 || hard_links=no
-  ln conftest.a conftest.b 2>/dev/null && hard_links=no
-  { $as_echo "$as_me:$LINENO: result: $hard_links" >&5
-$as_echo "$hard_links" >&6; }
-  if test "$hard_links" = no; then
-    { $as_echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5
-$as_echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;}
-    need_locks=warn
+fi
+if test -z "$ac_cv_prog_NMEDIT"; then
+  ac_ct_NMEDIT=$NMEDIT
+  # Extract the first word of "nmedit", so it can be a program name with args.
+set dummy nmedit; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_ac_ct_NMEDIT+set}" = set; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_NMEDIT"; then
+  ac_cv_prog_ac_ct_NMEDIT="$ac_ct_NMEDIT" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_NMEDIT="nmedit"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
   fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_NMEDIT=$ac_cv_prog_ac_ct_NMEDIT
+if test -n "$ac_ct_NMEDIT"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_NMEDIT" >&5
+$as_echo "$ac_ct_NMEDIT" >&6; }
 else
-  need_locks=no
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
 fi
 
-{ $as_echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5
-$as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; }
+  if test "x$ac_ct_NMEDIT" = x; then
+    NMEDIT=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    NMEDIT=$ac_ct_NMEDIT
+  fi
+else
+  NMEDIT="$ac_cv_prog_NMEDIT"
+fi
 
-  runpath_var=
-  allow_undefined_flag=
-  enable_shared_with_static_runtimes=no
-  archive_cmds=
-  archive_expsym_cmds=
-  old_archive_From_new_cmds=
-  old_archive_from_expsyms_cmds=
-  export_dynamic_flag_spec=
-  whole_archive_flag_spec=
-  thread_safe_flag_spec=
-  hardcode_libdir_flag_spec=
-  hardcode_libdir_flag_spec_ld=
-  hardcode_libdir_separator=
-  hardcode_direct=no
-  hardcode_minus_L=no
-  hardcode_shlibpath_var=unsupported
-  link_all_deplibs=unknown
-  hardcode_automatic=no
-  module_cmds=
-  module_expsym_cmds=
-  always_export_symbols=no
-  export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
-  # include_expsyms should be a list of space-separated symbols to be *always*
-  # included in the symbol list
-  include_expsyms=
-  # exclude_expsyms can be an extended regexp of symbols to exclude
-  # it will be wrapped by ` (' and `)$', so one must not match beginning or
-  # end of line.  Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
-  # as well as any symbol that contains `d'.
-  exclude_expsyms='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'
-  # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
-  # platforms (ab)use it in PIC code, but their linkers get confused if
-  # the symbol is explicitly referenced.  Since portable code cannot
-  # rely on this symbol name, it's probably fine to never include it in
-  # preloaded symbol tables.
-  # Exclude shared library initialization/finalization symbols.
-  extract_expsyms_cmds=
-  # Just being paranoid about ensuring that cc_basename is set.
-  for cc_temp in $compiler""; do
-  case $cc_temp in
-    compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
-    distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
-    \-*) ;;
-    *) break;;
-  esac
+    if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}lipo", so it can be a program name with args.
+set dummy ${ac_tool_prefix}lipo; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_LIPO+set}" = set; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$LIPO"; then
+  ac_cv_prog_LIPO="$LIPO" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_LIPO="${ac_tool_prefix}lipo"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
 done
-cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
+  done
+IFS=$as_save_IFS
 
-  case $host_os in
-  cygwin* | mingw* | pw32*)
-    # FIXME: the MSVC++ port hasn't been tested in a loooong time
-    # When not using gcc, we currently assume that we are using
-    # Microsoft Visual C++.
-    if test "$GCC" != yes; then
-      with_gnu_ld=no
-    fi
-    ;;
-  interix*)
-    # we just hope/assume this is gcc and not c89 (= MSVC++)
-    with_gnu_ld=yes
-    ;;
-  openbsd*)
-    with_gnu_ld=no
-    ;;
-  esac
+fi
+fi
+LIPO=$ac_cv_prog_LIPO
+if test -n "$LIPO"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LIPO" >&5
+$as_echo "$LIPO" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
 
-  ld_shlibs=yes
-  if test "$with_gnu_ld" = yes; then
-    # If archive_cmds runs LD, not CC, wlarc should be empty
-    wlarc='${wl}'
 
-    # Set some defaults for GNU ld with shared library support. These
-    # are reset later if shared libraries are not supported. Putting them
-    # here allows them to be overridden if necessary.
-    runpath_var=LD_RUN_PATH
-    hardcode_libdir_flag_spec='${wl}--rpath ${wl}$libdir'
-    export_dynamic_flag_spec='${wl}--export-dynamic'
-    # ancient GNU ld didn't support --whole-archive et. al.
-    if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then
-	whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
-      else
-  	whole_archive_flag_spec=
-    fi
-    supports_anon_versioning=no
-    case `$LD -v 2>/dev/null` in
-      *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11
-      *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
-      *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
-      *\ 2.11.*) ;; # other 2.11 versions
-      *) supports_anon_versioning=yes ;;
-    esac
+fi
+if test -z "$ac_cv_prog_LIPO"; then
+  ac_ct_LIPO=$LIPO
+  # Extract the first word of "lipo", so it can be a program name with args.
+set dummy lipo; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_ac_ct_LIPO+set}" = set; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_LIPO"; then
+  ac_cv_prog_ac_ct_LIPO="$ac_ct_LIPO" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_LIPO="lipo"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
 
-    # See if GNU ld supports shared libraries.
-    case $host_os in
-    aix[3-9]*)
-      # On AIX/PPC, the GNU linker is very broken
-      if test "$host_cpu" != ia64; then
-	ld_shlibs=no
-	cat <<EOF 1>&2
+fi
+fi
+ac_ct_LIPO=$ac_cv_prog_ac_ct_LIPO
+if test -n "$ac_ct_LIPO"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_LIPO" >&5
+$as_echo "$ac_ct_LIPO" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
 
-*** Warning: the GNU linker, at least up to release 2.9.1, is reported
-*** to be unable to reliably create shared libraries on AIX.
-*** Therefore, libtool is disabling shared libraries support.  If you
-*** really care for shared libraries, you may want to modify your PATH
-*** so that a non-GNU linker is found, and then restart.
+  if test "x$ac_ct_LIPO" = x; then
+    LIPO=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    LIPO=$ac_ct_LIPO
+  fi
+else
+  LIPO="$ac_cv_prog_LIPO"
+fi
 
-EOF
-      fi
-      ;;
+    if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}otool", so it can be a program name with args.
+set dummy ${ac_tool_prefix}otool; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_OTOOL+set}" = set; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$OTOOL"; then
+  ac_cv_prog_OTOOL="$OTOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_OTOOL="${ac_tool_prefix}otool"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
 
-    amigaos*)
-      archive_cmds='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
-      hardcode_libdir_flag_spec='-L$libdir'
-      hardcode_minus_L=yes
+fi
+fi
+OTOOL=$ac_cv_prog_OTOOL
+if test -n "$OTOOL"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OTOOL" >&5
+$as_echo "$OTOOL" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
 
-      # Samuel A. Falvo II <kc5tja@dolphin.openprojects.net> reports
-      # that the semantics of dynamic libraries on AmigaOS, at least up
-      # to version 4, is to share data among multiple programs linked
-      # with the same dynamic library.  Since this doesn't match the
-      # behavior of shared libraries on other platforms, we can't use
-      # them.
-      ld_shlibs=no
-      ;;
 
-    beos*)
-      if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-	allow_undefined_flag=unsupported
-	# Joseph Beckenbach <jrb3@best.com> says some releases of gcc
-	# support --undefined.  This deserves some investigation.  FIXME
-	archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-      else
-	ld_shlibs=no
-      fi
-      ;;
+fi
+if test -z "$ac_cv_prog_OTOOL"; then
+  ac_ct_OTOOL=$OTOOL
+  # Extract the first word of "otool", so it can be a program name with args.
+set dummy otool; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_ac_ct_OTOOL+set}" = set; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_OTOOL"; then
+  ac_cv_prog_ac_ct_OTOOL="$ac_ct_OTOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_OTOOL="otool"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
 
-    cygwin* | mingw* | pw32*)
-      # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, ) is actually meaningless,
-      # as there is no search path for DLLs.
-      hardcode_libdir_flag_spec='-L$libdir'
-      allow_undefined_flag=unsupported
-      always_export_symbols=no
-      enable_shared_with_static_runtimes=yes
-      export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/'\'' -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols'
+fi
+fi
+ac_ct_OTOOL=$ac_cv_prog_ac_ct_OTOOL
+if test -n "$ac_ct_OTOOL"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OTOOL" >&5
+$as_echo "$ac_ct_OTOOL" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
 
-      if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
-        archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
-	# If the export-symbols file already is a .def file (1st line
-	# is EXPORTS), use it as is; otherwise, prepend...
-	archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
-	  cp $export_symbols $output_objdir/$soname.def;
-	else
-	  echo EXPORTS > $output_objdir/$soname.def;
-	  cat $export_symbols >> $output_objdir/$soname.def;
-	fi~
-	$CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
-      else
-	ld_shlibs=no
-      fi
-      ;;
+  if test "x$ac_ct_OTOOL" = x; then
+    OTOOL=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    OTOOL=$ac_ct_OTOOL
+  fi
+else
+  OTOOL="$ac_cv_prog_OTOOL"
+fi
 
-    interix[3-9]*)
-      hardcode_direct=no
-      hardcode_shlibpath_var=no
-      hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
-      export_dynamic_flag_spec='${wl}-E'
-      # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
-      # Instead, shared libraries are loaded at an image base (0x10000000 by
-      # default) and relocated if they conflict, which is a slow very memory
-      # consuming and fragmenting process.  To avoid this, we pick a random,
-      # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
-      # time.  Moving up from 0x10000000 also allows more sbrk(2) space.
-      archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
-      archive_expsym_cmds='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
-      ;;
+    if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}otool64", so it can be a program name with args.
+set dummy ${ac_tool_prefix}otool64; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_OTOOL64+set}" = set; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$OTOOL64"; then
+  ac_cv_prog_OTOOL64="$OTOOL64" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_OTOOL64="${ac_tool_prefix}otool64"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
 
-    gnu* | linux* | k*bsd*-gnu)
-      if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-	tmp_addflag=
-	case $cc_basename,$host_cpu in
-	pgcc*)				# Portland Group C compiler
-	  whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
-	  tmp_addflag=' $pic_flag'
-	  ;;
-	pgf77* | pgf90* | pgf95*)	# Portland Group f77 and f90 compilers
-	  whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
-	  tmp_addflag=' $pic_flag -Mnomain' ;;
-	ecc*,ia64* | icc*,ia64*)		# Intel C compiler on ia64
-	  tmp_addflag=' -i_dynamic' ;;
-	efc*,ia64* | ifort*,ia64*)	# Intel Fortran compiler on ia64
-	  tmp_addflag=' -i_dynamic -nofor_main' ;;
-	ifc* | ifort*)			# Intel Fortran compiler
-	  tmp_addflag=' -nofor_main' ;;
-	esac
-	case `$CC -V 2>&1 | sed 5q` in
-	*Sun\ C*)			# Sun C 5.9
-	  whole_archive_flag_spec='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
-	  tmp_sharedflag='-G' ;;
-	*Sun\ F*)			# Sun Fortran 8.3
-	  tmp_sharedflag='-G' ;;
-	*)
-	  tmp_sharedflag='-shared' ;;
-	esac
-	archive_cmds='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+fi
+fi
+OTOOL64=$ac_cv_prog_OTOOL64
+if test -n "$OTOOL64"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OTOOL64" >&5
+$as_echo "$OTOOL64" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
 
-	if test $supports_anon_versioning = yes; then
-	  archive_expsym_cmds='$echo "{ global:" > $output_objdir/$libname.ver~
-  cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
-  $echo "local: *; };" >> $output_objdir/$libname.ver~
-	  $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
-	fi
-	link_all_deplibs=no
-      else
-	ld_shlibs=no
-      fi
-      ;;
 
-    netbsd*)
-      if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-	archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
-	wlarc=
-      else
-	archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-	archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-      fi
-      ;;
+fi
+if test -z "$ac_cv_prog_OTOOL64"; then
+  ac_ct_OTOOL64=$OTOOL64
+  # Extract the first word of "otool64", so it can be a program name with args.
+set dummy otool64; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_ac_ct_OTOOL64+set}" = set; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_OTOOL64"; then
+  ac_cv_prog_ac_ct_OTOOL64="$ac_ct_OTOOL64" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_OTOOL64="otool64"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
 
-    solaris*)
-      if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then
-	ld_shlibs=no
-	cat <<EOF 1>&2
+fi
+fi
+ac_ct_OTOOL64=$ac_cv_prog_ac_ct_OTOOL64
+if test -n "$ac_ct_OTOOL64"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OTOOL64" >&5
+$as_echo "$ac_ct_OTOOL64" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
 
-*** Warning: The releases 2.8.* of the GNU linker cannot reliably
-*** create shared libraries on Solaris systems.  Therefore, libtool
-*** is disabling shared libraries support.  We urge you to upgrade GNU
-*** binutils to release 2.9.1 or newer.  Another option is to modify
-*** your PATH or compiler configuration so that the native linker is
-*** used, and then restart.
+  if test "x$ac_ct_OTOOL64" = x; then
+    OTOOL64=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    OTOOL64=$ac_ct_OTOOL64
+  fi
+else
+  OTOOL64="$ac_cv_prog_OTOOL64"
+fi
 
-EOF
-      elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-	archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-	archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-      else
-	ld_shlibs=no
-      fi
-      ;;
 
-    sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
-      case `$LD -v 2>&1` in
-        *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*)
-	ld_shlibs=no
-	cat <<_LT_EOF 1>&2
 
-*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not
-*** reliably create shared libraries on SCO systems.  Therefore, libtool
-*** is disabling shared libraries support.  We urge you to upgrade GNU
-*** binutils to release 2.16.91.0.3 or newer.  Another option is to modify
-*** your PATH or compiler configuration so that the native linker is
-*** used, and then restart.
 
-_LT_EOF
-	;;
-	*)
-	  if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-	    hardcode_libdir_flag_spec='`test -z "$SCOABSPATH" && echo ${wl}-rpath,$libdir`'
-	    archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib'
-	    archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname,-retain-symbols-file,$export_symbols -o $lib'
-	  else
-	    ld_shlibs=no
-	  fi
-	;;
-      esac
-      ;;
 
-    sunos4*)
-      archive_cmds='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-      wlarc=
-      hardcode_direct=yes
-      hardcode_shlibpath_var=no
-      ;;
 
-    *)
-      if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-	archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-	archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-      else
-	ld_shlibs=no
-      fi
-      ;;
-    esac
 
-    if test "$ld_shlibs" = no; then
-      runpath_var=
-      hardcode_libdir_flag_spec=
-      export_dynamic_flag_spec=
-      whole_archive_flag_spec=
-    fi
-  else
-    # PORTME fill in a description of your system's linker (not GNU ld)
-    case $host_os in
-    aix3*)
-      allow_undefined_flag=unsupported
-      always_export_symbols=yes
-      archive_expsym_cmds='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
-      # Note: this linker hardcodes the directories in LIBPATH if there
-      # are no directories specified by -L.
-      hardcode_minus_L=yes
-      if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then
-	# Neither direct hardcoding nor static linking is supported with a
-	# broken collect2.
-	hardcode_direct=unsupported
-      fi
-      ;;
 
-    aix[4-9]*)
-      if test "$host_cpu" = ia64; then
-	# On IA64, the linker does run time linking by default, so we don't
-	# have to do anything special.
-	aix_use_runtimelinking=no
-	exp_sym_flag='-Bexport'
-	no_entry_flag=""
-      else
-	# If we're using GNU nm, then we don't want the "-C" option.
-	# -C means demangle to AIX nm, but means don't demangle with GNU nm
-	if $NM -V 2>&1 | grep 'GNU' > /dev/null; then
-	  export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols'
-	else
-	  export_symbols_cmds='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols'
-	fi
-	aix_use_runtimelinking=no
 
-	# Test if we are trying to use run time linking or normal
-	# AIX style linking. If -brtl is somewhere in LDFLAGS, we
-	# need to do runtime linking.
-	case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*)
-	  for ld_flag in $LDFLAGS; do
-  	  if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
-  	    aix_use_runtimelinking=yes
-  	    break
-  	  fi
-	  done
-	  ;;
-	esac
 
-	exp_sym_flag='-bexport'
-	no_entry_flag='-bnoentry'
-      fi
 
-      # When large executables or shared objects are built, AIX ld can
-      # have problems creating the table of contents.  If linking a library
-      # or program results in "error TOC overflow" add -mminimal-toc to
-      # CXXFLAGS/CFLAGS for g++/gcc.  In the cases where that is not
-      # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
 
-      archive_cmds=''
-      hardcode_direct=yes
-      hardcode_libdir_separator=':'
-      link_all_deplibs=yes
 
-      if test "$GCC" = yes; then
-	case $host_os in aix4.[012]|aix4.[012].*)
-	# We only want to do this on AIX 4.2 and lower, the check
-	# below for broken collect2 doesn't work under 4.3+
-	  collect2name=`${CC} -print-prog-name=collect2`
-	  if test -f "$collect2name" && \
-  	   strings "$collect2name" | grep resolve_lib_name >/dev/null
-	  then
-  	  # We have reworked collect2
-  	  :
-	  else
-  	  # We have old collect2
-  	  hardcode_direct=unsupported
-  	  # It fails to find uninstalled libraries when the uninstalled
-  	  # path is not listed in the libpath.  Setting hardcode_minus_L
-  	  # to unsupported forces relinking
-  	  hardcode_minus_L=yes
-  	  hardcode_libdir_flag_spec='-L$libdir'
-  	  hardcode_libdir_separator=
-	  fi
-	  ;;
-	esac
-	shared_flag='-shared'
-	if test "$aix_use_runtimelinking" = yes; then
-	  shared_flag="$shared_flag "'${wl}-G'
-	fi
-      else
-	# not using gcc
-	if test "$host_cpu" = ia64; then
-  	# VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
-  	# chokes on -Wl,-G. The following line is correct:
-	  shared_flag='-G'
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -single_module linker flag" >&5
+$as_echo_n "checking for -single_module linker flag... " >&6; }
+if test "${lt_cv_apple_cc_single_mod+set}" = set; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_apple_cc_single_mod=no
+      if test -z "${LT_MULTI_MODULE}"; then
+	# By default we will add the -single_module flag. You can override
+	# by either setting the environment variable LT_MULTI_MODULE
+	# non-empty at configure time, or by adding -multi_module to the
+	# link flags.
+	rm -rf libconftest.dylib*
+	echo "int foo(void){return 1;}" > conftest.c
+	echo "$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
+-dynamiclib -Wl,-single_module conftest.c" >&5
+	$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
+	  -dynamiclib -Wl,-single_module conftest.c 2>conftest.err
+        _lt_result=$?
+	if test -f libconftest.dylib && test ! -s conftest.err && test $_lt_result = 0; then
+	  lt_cv_apple_cc_single_mod=yes
 	else
-	  if test "$aix_use_runtimelinking" = yes; then
-	    shared_flag='${wl}-G'
-	  else
-	    shared_flag='${wl}-bM:SRE'
-	  fi
+	  cat conftest.err >&5
 	fi
+	rm -rf libconftest.dylib*
+	rm -f conftest.*
       fi
-
-      # It seems that -bexpall does not export symbols beginning with
-      # underscore (_), so it is better to generate a list of symbols to export.
-      always_export_symbols=yes
-      if test "$aix_use_runtimelinking" = yes; then
-	# Warning - without using the other runtime loading flags (-brtl),
-	# -berok will link without error, but may produce a broken library.
-	allow_undefined_flag='-berok'
-       # Determine the default libpath from the value encoded in an empty executable.
-       cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_apple_cc_single_mod" >&5
+$as_echo "$lt_cv_apple_cc_single_mod" >&6; }
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -exported_symbols_list linker flag" >&5
+$as_echo_n "checking for -exported_symbols_list linker flag... " >&6; }
+if test "${lt_cv_ld_exported_symbols_list+set}" = set; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_ld_exported_symbols_list=no
+      save_LDFLAGS=$LDFLAGS
+      echo "_main" > conftest.sym
+      LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym"
+      cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 
 int
@@ -9107,67 +7709,65 @@
   return 0;
 }
 _ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_link") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest$ac_exeext && {
-	 test "$cross_compiling" = yes ||
-	 $as_test_x conftest$ac_exeext
-       }; then
-
-lt_aix_libpath_sed='
-    /Import File Strings/,/^$/ {
-	/^0/ {
-	    s/^0  *\(.*\)$/\1/
-	    p
-	}
-    }'
-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-# Check for a 64-bit object if we didn't find anything.
-if test -z "$aix_libpath"; then
-  aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-fi
+if ac_fn_c_try_link "$LINENO"; then :
+  lt_cv_ld_exported_symbols_list=yes
 else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
+  lt_cv_ld_exported_symbols_list=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+	LDFLAGS="$save_LDFLAGS"
 
 fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_exported_symbols_list" >&5
+$as_echo "$lt_cv_ld_exported_symbols_list" >&6; }
+    case $host_os in
+    rhapsody* | darwin1.[012])
+      _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;;
+    darwin1.*)
+      _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
+    darwin*) # darwin 5.x on
+      # if running on 10.5 or later, the deployment target defaults
+      # to the OS version, if on x86, and 10.4, the deployment
+      # target defaults to 10.4. Don't you love it?
+      case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in
+	10.0,*86*-darwin8*|10.0,*-darwin[91]*)
+	  _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
+	10.[012]*)
+	  _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
+	10.*)
+	  _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
+      esac
+    ;;
+  esac
+    if test "$lt_cv_apple_cc_single_mod" = "yes"; then
+      _lt_dar_single_mod='$single_module'
+    fi
+    if test "$lt_cv_ld_exported_symbols_list" = "yes"; then
+      _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym'
+    else
+      _lt_dar_export_syms='~$NMEDIT -s $output_objdir/${libname}-symbols.expsym ${lib}'
+    fi
+    if test "$DSYMUTIL" != ":"; then
+      _lt_dsymutil='~$DSYMUTIL $lib || :'
+    else
+      _lt_dsymutil=
+    fi
+    ;;
+  esac
 
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-      conftest$ac_exeext conftest.$ac_ext
-if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
 
-       hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
-	archive_expsym_cmds="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
-       else
-	if test "$host_cpu" = ia64; then
-	  hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib'
-	  allow_undefined_flag="-z nodefs"
-	  archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
-	else
-	 # Determine the default libpath from the value encoded in an empty executable.
-	 cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ANSI C header files" >&5
+$as_echo_n "checking for ANSI C header files... " >&6; }
+if test "${ac_cv_header_stdc+set}" = set; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
+#include <stdlib.h>
+#include <stdarg.h>
+#include <string.h>
+#include <float.h>
 
 int
 main ()
@@ -9177,3052 +7777,2127 @@
   return 0;
 }
 _ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_link") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest$ac_exeext && {
-	 test "$cross_compiling" = yes ||
-	 $as_test_x conftest$ac_exeext
-       }; then
-
-lt_aix_libpath_sed='
-    /Import File Strings/,/^$/ {
-	/^0/ {
-	    s/^0  *\(.*\)$/\1/
-	    p
-	}
-    }'
-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-# Check for a 64-bit object if we didn't find anything.
-if test -z "$aix_libpath"; then
-  aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-fi
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_cv_header_stdc=yes
 else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
+  ac_cv_header_stdc=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+
+if test $ac_cv_header_stdc = yes; then
+  # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <string.h>
 
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+  $EGREP "memchr" >/dev/null 2>&1; then :
 
+else
+  ac_cv_header_stdc=no
 fi
+rm -f conftest*
 
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-      conftest$ac_exeext conftest.$ac_ext
-if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
+fi
 
-	 hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
-	  # Warning - without using the other run time loading flags,
-	  # -berok will link without error, but may produce a broken library.
-	  no_undefined_flag=' ${wl}-bernotok'
-	  allow_undefined_flag=' ${wl}-berok'
-	  # Exported symbols can be pulled into shared objects from archives
-	  whole_archive_flag_spec='$convenience'
-	  archive_cmds_need_lc=yes
-	  # This is similar to how AIX traditionally builds its shared libraries.
-	  archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
-	fi
-      fi
-      ;;
+if test $ac_cv_header_stdc = yes; then
+  # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <stdlib.h>
 
-    amigaos*)
-      archive_cmds='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
-      hardcode_libdir_flag_spec='-L$libdir'
-      hardcode_minus_L=yes
-      # see comment about different semantics on the GNU ld section
-      ld_shlibs=no
-      ;;
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+  $EGREP "free" >/dev/null 2>&1; then :
 
-    bsdi[45]*)
-      export_dynamic_flag_spec=-rdynamic
-      ;;
+else
+  ac_cv_header_stdc=no
+fi
+rm -f conftest*
 
-    cygwin* | mingw* | pw32*)
-      # When not using gcc, we currently assume that we are using
-      # Microsoft Visual C++.
-      # hardcode_libdir_flag_spec is actually meaningless, as there is
-      # no search path for DLLs.
-      hardcode_libdir_flag_spec=' '
-      allow_undefined_flag=unsupported
-      # Tell ltmain to make .lib files, not .a files.
-      libext=lib
-      # Tell ltmain to make .dll files, not .so files.
-      shrext_cmds=".dll"
-      # FIXME: Setting linknames here is a bad hack.
-      archive_cmds='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames='
-      # The linker will automatically build a .lib file if we build a DLL.
-      old_archive_From_new_cmds='true'
-      # FIXME: Should let the user specify the lib program.
-      old_archive_cmds='lib -OUT:$oldlib$oldobjs$old_deplibs'
-      fix_srcfile_path='`cygpath -w "$srcfile"`'
-      enable_shared_with_static_runtimes=yes
-      ;;
+fi
 
-    darwin* | rhapsody*)
-      case $host_os in
-        rhapsody* | darwin1.[012])
-         allow_undefined_flag='${wl}-undefined ${wl}suppress'
-         ;;
-       *) # Darwin 1.3 on
-         if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then
-           allow_undefined_flag='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
-         else
-           case ${MACOSX_DEPLOYMENT_TARGET} in
-             10.[012])
-               allow_undefined_flag='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
-               ;;
-             10.*)
-               allow_undefined_flag='${wl}-undefined ${wl}dynamic_lookup'
-               ;;
-           esac
-         fi
-         ;;
-      esac
-      archive_cmds_need_lc=no
-      hardcode_direct=no
-      hardcode_automatic=yes
-      hardcode_shlibpath_var=unsupported
-      whole_archive_flag_spec=''
-      link_all_deplibs=yes
-    if test "$GCC" = yes ; then
-    	output_verbose_link_cmd='echo'
-        archive_cmds="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}"
-        module_cmds="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}"
-        archive_expsym_cmds="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}"
-        module_expsym_cmds="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}"
-    else
-      case $cc_basename in
-        xlc*)
-         output_verbose_link_cmd='echo'
-         archive_cmds='$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $xlcverstring'
-         module_cmds='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
-          # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
-         archive_expsym_cmds='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $xlcverstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-          module_expsym_cmds='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag  -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-          ;;
-       *)
-         ld_shlibs=no
-          ;;
-      esac
-    fi
-      ;;
+if test $ac_cv_header_stdc = yes; then
+  # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi.
+  if test "$cross_compiling" = yes; then :
+  :
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <ctype.h>
+#include <stdlib.h>
+#if ((' ' & 0x0FF) == 0x020)
+# define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
+# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
+#else
+# define ISLOWER(c) \
+		   (('a' <= (c) && (c) <= 'i') \
+		     || ('j' <= (c) && (c) <= 'r') \
+		     || ('s' <= (c) && (c) <= 'z'))
+# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c))
+#endif
 
-    dgux*)
-      archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-      hardcode_libdir_flag_spec='-L$libdir'
-      hardcode_shlibpath_var=no
-      ;;
+#define XOR(e, f) (((e) && !(f)) || (!(e) && (f)))
+int
+main ()
+{
+  int i;
+  for (i = 0; i < 256; i++)
+    if (XOR (islower (i), ISLOWER (i))
+	|| toupper (i) != TOUPPER (i))
+      return 2;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_run "$LINENO"; then :
 
-    freebsd1*)
-      ld_shlibs=no
-      ;;
+else
+  ac_cv_header_stdc=no
+fi
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
+  conftest.$ac_objext conftest.beam conftest.$ac_ext
+fi
 
-    # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
-    # support.  Future versions do this automatically, but an explicit c++rt0.o
-    # does not break anything, and helps significantly (at the cost of a little
-    # extra space).
-    freebsd2.2*)
-      archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
-      hardcode_libdir_flag_spec='-R$libdir'
-      hardcode_direct=yes
-      hardcode_shlibpath_var=no
-      ;;
+fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_stdc" >&5
+$as_echo "$ac_cv_header_stdc" >&6; }
+if test $ac_cv_header_stdc = yes; then
 
-    # Unfortunately, older versions of FreeBSD 2 do not have this feature.
-    freebsd2*)
-      archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-      hardcode_direct=yes
-      hardcode_minus_L=yes
-      hardcode_shlibpath_var=no
-      ;;
+$as_echo "#define STDC_HEADERS 1" >>confdefs.h
 
-    # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
-    freebsd* | dragonfly*)
-      archive_cmds='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
-      hardcode_libdir_flag_spec='-R$libdir'
-      hardcode_direct=yes
-      hardcode_shlibpath_var=no
-      ;;
+fi
 
-    hpux9*)
-      if test "$GCC" = yes; then
-	archive_cmds='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
-      else
-	archive_cmds='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
-      fi
-      hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
-      hardcode_libdir_separator=:
-      hardcode_direct=yes
+# On IRIX 5.3, sys/types and inttypes.h are conflicting.
+for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \
+		  inttypes.h stdint.h unistd.h
+do :
+  as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
+ac_fn_c_check_header_compile "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default
+"
+eval as_val=\$$as_ac_Header
+   if test "x$as_val" = x""yes; then :
+  cat >>confdefs.h <<_ACEOF
+#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
+_ACEOF
 
-      # hardcode_minus_L: Not really in the search PATH,
-      # but as the default location of the library.
-      hardcode_minus_L=yes
-      export_dynamic_flag_spec='${wl}-E'
-      ;;
+fi
 
-    hpux10*)
-      if test "$GCC" = yes -a "$with_gnu_ld" = no; then
-	archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
-      else
-	archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
-      fi
-      if test "$with_gnu_ld" = no; then
-	hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
-	hardcode_libdir_separator=:
+done
 
-	hardcode_direct=yes
-	export_dynamic_flag_spec='${wl}-E'
 
-	# hardcode_minus_L: Not really in the search PATH,
-	# but as the default location of the library.
-	hardcode_minus_L=yes
-      fi
-      ;;
+for ac_header in dlfcn.h
+do :
+  ac_fn_c_check_header_compile "$LINENO" "dlfcn.h" "ac_cv_header_dlfcn_h" "$ac_includes_default
+"
+if test "x$ac_cv_header_dlfcn_h" = x""yes; then :
+  cat >>confdefs.h <<_ACEOF
+#define HAVE_DLFCN_H 1
+_ACEOF
 
-    hpux11*)
-      if test "$GCC" = yes -a "$with_gnu_ld" = no; then
-	case $host_cpu in
-	hppa*64*)
-	  archive_cmds='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-	  ;;
-	ia64*)
-	  archive_cmds='$CC -shared ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
-	  ;;
-	*)
-	  archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
-	  ;;
-	esac
-      else
-	case $host_cpu in
-	hppa*64*)
-	  archive_cmds='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-	  ;;
-	ia64*)
-	  archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
-	  ;;
-	*)
-	  archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
-	  ;;
-	esac
-      fi
-      if test "$with_gnu_ld" = no; then
-	hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
-	hardcode_libdir_separator=:
+fi
 
-	case $host_cpu in
-	hppa*64*|ia64*)
-	  hardcode_libdir_flag_spec_ld='+b $libdir'
-	  hardcode_direct=no
-	  hardcode_shlibpath_var=no
-	  ;;
-	*)
-	  hardcode_direct=yes
-	  export_dynamic_flag_spec='${wl}-E'
+done
 
-	  # hardcode_minus_L: Not really in the search PATH,
-	  # but as the default location of the library.
-	  hardcode_minus_L=yes
-	  ;;
-	esac
-      fi
-      ;;
 
-    irix5* | irix6* | nonstopux*)
-      if test "$GCC" = yes; then
-	archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-      else
-	archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-	hardcode_libdir_flag_spec_ld='-rpath $libdir'
-      fi
-      hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
-      hardcode_libdir_separator=:
-      link_all_deplibs=yes
-      ;;
 
-    netbsd*)
-      if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-	archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'  # a.out
-      else
-	archive_cmds='$LD -shared -o $lib $libobjs $deplibs $linker_flags'      # ELF
-      fi
-      hardcode_libdir_flag_spec='-R$libdir'
-      hardcode_direct=yes
-      hardcode_shlibpath_var=no
-      ;;
+ac_ext=cpp
+ac_cpp='$CXXCPP $CPPFLAGS'
+ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
+if test -z "$CXX"; then
+  if test -n "$CCC"; then
+    CXX=$CCC
+  else
+    if test -n "$ac_tool_prefix"; then
+  for ac_prog in g++ c++ gpp aCC CC cxx cc++ cl.exe FCC KCC RCC xlC_r xlC
+  do
+    # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_CXX+set}" = set; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$CXX"; then
+  ac_cv_prog_CXX="$CXX" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_CXX="$ac_tool_prefix$ac_prog"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
 
-    newsos6)
-      archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-      hardcode_direct=yes
-      hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
-      hardcode_libdir_separator=:
-      hardcode_shlibpath_var=no
-      ;;
+fi
+fi
+CXX=$ac_cv_prog_CXX
+if test -n "$CXX"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CXX" >&5
+$as_echo "$CXX" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
 
-    openbsd*)
-      if test -f /usr/libexec/ld.so; then
-	hardcode_direct=yes
-	hardcode_shlibpath_var=no
-	if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-	  archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
-	  archive_expsym_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
-	  hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
-	  export_dynamic_flag_spec='${wl}-E'
-	else
-	  case $host_os in
-	   openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*)
-	     archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-	     hardcode_libdir_flag_spec='-R$libdir'
-	     ;;
-	   *)
-	     archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
-	     hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
-	     ;;
-	  esac
-        fi
-      else
-	ld_shlibs=no
-      fi
-      ;;
 
-    os2*)
-      hardcode_libdir_flag_spec='-L$libdir'
-      hardcode_minus_L=yes
-      allow_undefined_flag=unsupported
-      archive_cmds='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
-      old_archive_From_new_cmds='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
-      ;;
+    test -n "$CXX" && break
+  done
+fi
+if test -z "$CXX"; then
+  ac_ct_CXX=$CXX
+  for ac_prog in g++ c++ gpp aCC CC cxx cc++ cl.exe FCC KCC RCC xlC_r xlC
+do
+  # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_ac_ct_CXX+set}" = set; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_CXX"; then
+  ac_cv_prog_ac_ct_CXX="$ac_ct_CXX" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_CXX="$ac_prog"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
 
-    osf3*)
-      if test "$GCC" = yes; then
-	allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
-	archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-      else
-	allow_undefined_flag=' -expect_unresolved \*'
-	archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-      fi
-      hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
-      hardcode_libdir_separator=:
-      ;;
+fi
+fi
+ac_ct_CXX=$ac_cv_prog_ac_ct_CXX
+if test -n "$ac_ct_CXX"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CXX" >&5
+$as_echo "$ac_ct_CXX" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
 
-    osf4* | osf5*)	# as osf3* with the addition of -msym flag
-      if test "$GCC" = yes; then
-	allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
-	archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-	hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
-      else
-	allow_undefined_flag=' -expect_unresolved \*'
-	archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-	archive_expsym_cmds='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~
-	$LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~$rm $lib.exp'
 
-	# Both c and cxx compiler support -rpath directly
-	hardcode_libdir_flag_spec='-rpath $libdir'
-      fi
-      hardcode_libdir_separator=:
-      ;;
+  test -n "$ac_ct_CXX" && break
+done
 
-    solaris*)
-      no_undefined_flag=' -z text'
-      if test "$GCC" = yes; then
-	wlarc='${wl}'
-	archive_cmds='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-	archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-	  $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp'
-      else
-	wlarc=''
-	archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
-	archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-  	$LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
-      fi
-      hardcode_libdir_flag_spec='-R$libdir'
-      hardcode_shlibpath_var=no
-      case $host_os in
-      solaris2.[0-5] | solaris2.[0-5].*) ;;
-      *)
-	# The compiler driver will combine and reorder linker options,
-	# but understands `-z linker_flag'.  GCC discards it without `$wl',
-	# but is careful enough not to reorder.
- 	# Supported since Solaris 2.6 (maybe 2.5.1?)
-	if test "$GCC" = yes; then
-	  whole_archive_flag_spec='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
-	else
-	  whole_archive_flag_spec='-z allextract$convenience -z defaultextract'
-	fi
-	;;
-      esac
-      link_all_deplibs=yes
-      ;;
+  if test "x$ac_ct_CXX" = x; then
+    CXX="g++"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    CXX=$ac_ct_CXX
+  fi
+fi
 
-    sunos4*)
-      if test "x$host_vendor" = xsequent; then
-	# Use $CC to link under sequent, because it throws in some extra .o
-	# files that make .init and .fini sections work.
-	archive_cmds='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
-      else
-	archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
-      fi
-      hardcode_libdir_flag_spec='-L$libdir'
-      hardcode_direct=yes
-      hardcode_minus_L=yes
-      hardcode_shlibpath_var=no
-      ;;
+  fi
+fi
+# Provide some information about the compiler.
+$as_echo "$as_me:${as_lineno-$LINENO}: checking for C++ compiler version" >&5
+set X $ac_compile
+ac_compiler=$2
+for ac_option in --version -v -V -qversion; do
+  { { ac_try="$ac_compiler $ac_option >&5"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_compiler $ac_option >&5") 2>conftest.err
+  ac_status=$?
+  if test -s conftest.err; then
+    sed '10a\
+... rest of stderr output deleted ...
+         10q' conftest.err >conftest.er1
+    cat conftest.er1 >&5
+    rm -f conftest.er1 conftest.err
+  fi
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }
+done
 
-    sysv4)
-      case $host_vendor in
-	sni)
-	  archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-	  hardcode_direct=yes # is this really true???
-	;;
-	siemens)
-	  ## LD is ld it makes a PLAMLIB
-	  ## CC just makes a GrossModule.
-	  archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags'
-	  reload_cmds='$CC -r -o $output$reload_objs'
-	  hardcode_direct=no
-        ;;
-	motorola)
-	  archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-	  hardcode_direct=no #Motorola manual says yes, but my tests say they lie
-	;;
-      esac
-      runpath_var='LD_RUN_PATH'
-      hardcode_shlibpath_var=no
-      ;;
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C++ compiler" >&5
+$as_echo_n "checking whether we are using the GNU C++ compiler... " >&6; }
+if test "${ac_cv_cxx_compiler_gnu+set}" = set; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
 
-    sysv4.3*)
-      archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-      hardcode_shlibpath_var=no
-      export_dynamic_flag_spec='-Bexport'
-      ;;
+int
+main ()
+{
+#ifndef __GNUC__
+       choke me
+#endif
 
-    sysv4*MP*)
-      if test -d /usr/nec; then
-	archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-	hardcode_shlibpath_var=no
-	runpath_var=LD_RUN_PATH
-	hardcode_runpath_var=yes
-	ld_shlibs=yes
-      fi
-      ;;
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_cxx_try_compile "$LINENO"; then :
+  ac_compiler_gnu=yes
+else
+  ac_compiler_gnu=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ac_cv_cxx_compiler_gnu=$ac_compiler_gnu
 
-    sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*)
-      no_undefined_flag='${wl}-z,text'
-      archive_cmds_need_lc=no
-      hardcode_shlibpath_var=no
-      runpath_var='LD_RUN_PATH'
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_cxx_compiler_gnu" >&5
+$as_echo "$ac_cv_cxx_compiler_gnu" >&6; }
+if test $ac_compiler_gnu = yes; then
+  GXX=yes
+else
+  GXX=
+fi
+ac_test_CXXFLAGS=${CXXFLAGS+set}
+ac_save_CXXFLAGS=$CXXFLAGS
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CXX accepts -g" >&5
+$as_echo_n "checking whether $CXX accepts -g... " >&6; }
+if test "${ac_cv_prog_cxx_g+set}" = set; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_save_cxx_werror_flag=$ac_cxx_werror_flag
+   ac_cxx_werror_flag=yes
+   ac_cv_prog_cxx_g=no
+   CXXFLAGS="-g"
+   cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
 
-      if test "$GCC" = yes; then
-	archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-	archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-      else
-	archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-	archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-      fi
-      ;;
+int
+main ()
+{
 
-    sysv5* | sco3.2v5* | sco5v6*)
-      # Note: We can NOT use -z defs as we might desire, because we do not
-      # link with -lc, and that would cause any symbols used from libc to
-      # always be unresolved, which means just about no library would
-      # ever link correctly.  If we're not using GNU ld we use -z text
-      # though, which does catch some bad symbols but isn't as heavy-handed
-      # as -z defs.
-      no_undefined_flag='${wl}-z,text'
-      allow_undefined_flag='${wl}-z,nodefs'
-      archive_cmds_need_lc=no
-      hardcode_shlibpath_var=no
-      hardcode_libdir_flag_spec='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`'
-      hardcode_libdir_separator=':'
-      link_all_deplibs=yes
-      export_dynamic_flag_spec='${wl}-Bexport'
-      runpath_var='LD_RUN_PATH'
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_cxx_try_compile "$LINENO"; then :
+  ac_cv_prog_cxx_g=yes
+else
+  CXXFLAGS=""
+      cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
 
-      if test "$GCC" = yes; then
-	archive_cmds='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
-	archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
-      else
-	archive_cmds='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
-	archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
-      fi
-      ;;
+int
+main ()
+{
 
-    uts4*)
-      archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-      hardcode_libdir_flag_spec='-L$libdir'
-      hardcode_shlibpath_var=no
-      ;;
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_cxx_try_compile "$LINENO"; then :
 
-    *)
-      ld_shlibs=no
-      ;;
-    esac
-  fi
+else
+  ac_cxx_werror_flag=$ac_save_cxx_werror_flag
+	 CXXFLAGS="-g"
+	 cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
 
-{ $as_echo "$as_me:$LINENO: result: $ld_shlibs" >&5
-$as_echo "$ld_shlibs" >&6; }
-test "$ld_shlibs" = no && can_build_shared=no
+int
+main ()
+{
 
-#
-# Do we need to explicitly link libc?
-#
-case "x$archive_cmds_need_lc" in
-x|xyes)
-  # Assume -lc should be added
-  archive_cmds_need_lc=yes
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_cxx_try_compile "$LINENO"; then :
+  ac_cv_prog_cxx_g=yes
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+   ac_cxx_werror_flag=$ac_save_cxx_werror_flag
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cxx_g" >&5
+$as_echo "$ac_cv_prog_cxx_g" >&6; }
+if test "$ac_test_CXXFLAGS" = set; then
+  CXXFLAGS=$ac_save_CXXFLAGS
+elif test $ac_cv_prog_cxx_g = yes; then
+  if test "$GXX" = yes; then
+    CXXFLAGS="-g -O2"
+  else
+    CXXFLAGS="-g"
+  fi
+else
+  if test "$GXX" = yes; then
+    CXXFLAGS="-O2"
+  else
+    CXXFLAGS=
+  fi
+fi
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
 
-  if test "$enable_shared" = yes && test "$GCC" = yes; then
-    case $archive_cmds in
-    *'~'*)
-      # FIXME: we may have to deal with multi-command sequences.
-      ;;
-    '$CC '*)
-      # Test whether the compiler implicitly links with -lc since on some
-      # systems, -lgcc has to come before -lc. If gcc already passes -lc
-      # to ld, don't add -lc before -lgcc.
-      { $as_echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5
-$as_echo_n "checking whether -lc should be explicitly linked in... " >&6; }
-      $rm conftest*
-      echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+depcc="$CXX"  am_compiler_list=
 
-      if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } 2>conftest.err; then
-        soname=conftest
-        lib=conftest
-        libobjs=conftest.$ac_objext
-        deplibs=
-        wl=$lt_prog_compiler_wl
-	pic_flag=$lt_prog_compiler_pic
-        compiler_flags=-v
-        linker_flags=-v
-        verstring=
-        output_objdir=.
-        libname=conftest
-        lt_save_allow_undefined_flag=$allow_undefined_flag
-        allow_undefined_flag=
-        if { (eval echo "$as_me:$LINENO: \"$archive_cmds 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1\"") >&5
-  (eval $archive_cmds 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) 2>&5
-  ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }
-        then
-	  archive_cmds_need_lc=no
-        else
-	  archive_cmds_need_lc=yes
-        fi
-        allow_undefined_flag=$lt_save_allow_undefined_flag
-      else
-        cat conftest.err 1>&5
-      fi
-      $rm conftest*
-      { $as_echo "$as_me:$LINENO: result: $archive_cmds_need_lc" >&5
-$as_echo "$archive_cmds_need_lc" >&6; }
-      ;;
-    esac
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5
+$as_echo_n "checking dependency style of $depcc... " >&6; }
+if test "${am_cv_CXX_dependencies_compiler_type+set}" = set; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
+  # We make a subdir and do the tests there.  Otherwise we can end up
+  # making bogus files that we don't know about and never remove.  For
+  # instance it was reported that on HP-UX the gcc test will end up
+  # making a dummy file named `D' -- because `-MD' means `put the output
+  # in D'.
+  mkdir conftest.dir
+  # Copy depcomp to subdir because otherwise we won't find it if we're
+  # using a relative directory.
+  cp "$am_depcomp" conftest.dir
+  cd conftest.dir
+  # We will build objects and dependencies in a subdirectory because
+  # it helps to detect inapplicable dependency modes.  For instance
+  # both Tru64's cc and ICC support -MD to output dependencies as a
+  # side effect of compilation, but ICC will put the dependencies in
+  # the current directory while Tru64 will put them in the object
+  # directory.
+  mkdir sub
+
+  am_cv_CXX_dependencies_compiler_type=none
+  if test "$am_compiler_list" = ""; then
+     am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp`
   fi
-  ;;
-esac
+  am__universal=false
+  case " $depcc " in #(
+     *\ -arch\ *\ -arch\ *) am__universal=true ;;
+     esac
 
-{ $as_echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5
-$as_echo_n "checking dynamic linker characteristics... " >&6; }
-library_names_spec=
-libname_spec='lib$name'
-soname_spec=
-shrext_cmds=".so"
-postinstall_cmds=
-postuninstall_cmds=
-finish_cmds=
-finish_eval=
-shlibpath_var=
-shlibpath_overrides_runpath=unknown
-version_type=none
-dynamic_linker="$host_os ld.so"
-sys_lib_dlsearch_path_spec="/lib /usr/lib"
+  for depmode in $am_compiler_list; do
+    # Setup a source with many dependencies, because some compilers
+    # like to wrap large dependency lists on column 80 (with \), and
+    # we should not choose a depcomp mode which is confused by this.
+    #
+    # We need to recreate these files for each test, as the compiler may
+    # overwrite some of them when testing with obscure command lines.
+    # This happens at least with the AIX C compiler.
+    : > sub/conftest.c
+    for i in 1 2 3 4 5 6; do
+      echo '#include "conftst'$i'.h"' >> sub/conftest.c
+      # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with
+      # Solaris 8's {/usr,}/bin/sh.
+      touch sub/conftst$i.h
+    done
+    echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
 
-if test "$GCC" = yes; then
-  case $host_os in
-    darwin*) lt_awk_arg="/^libraries:/,/LR/" ;;
-    *) lt_awk_arg="/^libraries:/" ;;
-  esac
-  lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e "s,=/,/,g"`
-  if echo "$lt_search_path_spec" | grep ';' >/dev/null ; then
-    # if the path contains ";" then we assume it to be the separator
-    # otherwise default to the standard path separator (i.e. ":") - it is
-    # assumed that no part of a normal pathname contains ";" but that should
-    # okay in the real world where ";" in dirpaths is itself problematic.
-    lt_search_path_spec=`echo "$lt_search_path_spec" | $SED -e 's/;/ /g'`
-  else
-    lt_search_path_spec=`echo "$lt_search_path_spec" | $SED  -e "s/$PATH_SEPARATOR/ /g"`
-  fi
-  # Ok, now we have the path, separated by spaces, we can step through it
-  # and add multilib dir if necessary.
-  lt_tmp_lt_search_path_spec=
-  lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null`
-  for lt_sys_path in $lt_search_path_spec; do
-    if test -d "$lt_sys_path/$lt_multi_os_dir"; then
-      lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir"
-    else
-      test -d "$lt_sys_path" && \
-	lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path"
+    # We check with `-c' and `-o' for the sake of the "dashmstdout"
+    # mode.  It turns out that the SunPro C++ compiler does not properly
+    # handle `-M -o', and we need to detect this.  Also, some Intel
+    # versions had trouble with output in subdirs
+    am__obj=sub/conftest.${OBJEXT-o}
+    am__minus_obj="-o $am__obj"
+    case $depmode in
+    gcc)
+      # This depmode causes a compiler race in universal mode.
+      test "$am__universal" = false || continue
+      ;;
+    nosideeffect)
+      # after this tag, mechanisms are not by side-effect, so they'll
+      # only be used when explicitly requested
+      if test "x$enable_dependency_tracking" = xyes; then
+	continue
+      else
+	break
+      fi
+      ;;
+    msvisualcpp | msvcmsys)
+      # This compiler won't grok `-c -o', but also, the minuso test has
+      # not run yet.  These depmodes are late enough in the game, and
+      # so weak that their functioning should not be impacted.
+      am__obj=conftest.${OBJEXT-o}
+      am__minus_obj=
+      ;;
+    none) break ;;
+    esac
+    if depmode=$depmode \
+       source=sub/conftest.c object=$am__obj \
+       depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
+       $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \
+         >/dev/null 2>conftest.err &&
+       grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
+       grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
+       grep $am__obj sub/conftest.Po > /dev/null 2>&1 &&
+       ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
+      # icc doesn't choke on unknown options, it will just issue warnings
+      # or remarks (even with -Werror).  So we grep stderr for any message
+      # that says an option was ignored or not supported.
+      # When given -MP, icc 7.0 and 7.1 complain thusly:
+      #   icc: Command line warning: ignoring option '-M'; no argument required
+      # The diagnosis changed in icc 8.0:
+      #   icc: Command line remark: option '-MP' not supported
+      if (grep 'ignoring option' conftest.err ||
+          grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
+        am_cv_CXX_dependencies_compiler_type=$depmode
+        break
+      fi
     fi
   done
-  lt_search_path_spec=`echo $lt_tmp_lt_search_path_spec | awk '
-BEGIN {RS=" "; FS="/|\n";} {
-  lt_foo="";
-  lt_count=0;
-  for (lt_i = NF; lt_i > 0; lt_i--) {
-    if ($lt_i != "" && $lt_i != ".") {
-      if ($lt_i == "..") {
-        lt_count++;
-      } else {
-        if (lt_count == 0) {
-          lt_foo="/" $lt_i lt_foo;
-        } else {
-          lt_count--;
-        }
-      }
-    }
-  }
-  if (lt_foo != "") { lt_freq[lt_foo]++; }
-  if (lt_freq[lt_foo] == 1) { print lt_foo; }
-}'`
-  sys_lib_search_path_spec=`echo $lt_search_path_spec`
+
+  cd ..
+  rm -rf conftest.dir
 else
-  sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
+  am_cv_CXX_dependencies_compiler_type=none
 fi
-need_lib_prefix=unknown
-hardcode_into_libs=no
-
-# when you set need_version to no, make sure it does not cause -set_version
-# flags to be left without arguments
-need_version=unknown
 
-case $host_os in
-aix3*)
-  version_type=linux
-  library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
-  shlibpath_var=LIBPATH
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_CXX_dependencies_compiler_type" >&5
+$as_echo "$am_cv_CXX_dependencies_compiler_type" >&6; }
+CXXDEPMODE=depmode=$am_cv_CXX_dependencies_compiler_type
 
-  # AIX 3 has no versioning support, so we append a major version to the name.
-  soname_spec='${libname}${release}${shared_ext}$major'
-  ;;
+ if
+  test "x$enable_dependency_tracking" != xno \
+  && test "$am_cv_CXX_dependencies_compiler_type" = gcc3; then
+  am__fastdepCXX_TRUE=
+  am__fastdepCXX_FALSE='#'
+else
+  am__fastdepCXX_TRUE='#'
+  am__fastdepCXX_FALSE=
+fi
 
-aix[4-9]*)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  hardcode_into_libs=yes
-  if test "$host_cpu" = ia64; then
-    # AIX 5 supports IA64
-    library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
-    shlibpath_var=LD_LIBRARY_PATH
-  else
-    # With GCC up to 2.95.x, collect2 would create an import file
-    # for dependence libraries.  The import file would start with
-    # the line `#! .'.  This would cause the generated library to
-    # depend on `.', always an invalid library.  This was fixed in
-    # development snapshots of GCC prior to 3.0.
-    case $host_os in
-      aix4 | aix4.[01] | aix4.[01].*)
-      if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
-	   echo ' yes '
-	   echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then
-	:
-      else
-	can_build_shared=no
-      fi
-      ;;
-    esac
-    # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
-    # soname into executable. Probably we can add versioning support to
-    # collect2, so additional links can be useful in future.
-    if test "$aix_use_runtimelinking" = yes; then
-      # If using run time linking (on AIX 4.2 or later) use lib<name>.so
-      # instead of lib<name>.a to let people know that these are not
-      # typical AIX shared libraries.
-      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-    else
-      # We preserve .a as extension for shared libraries through AIX4.2
-      # and later when we are not doing run time linking.
-      library_names_spec='${libname}${release}.a $libname.a'
-      soname_spec='${libname}${release}${shared_ext}$major'
-    fi
-    shlibpath_var=LIBPATH
-  fi
-  ;;
 
-amigaos*)
-  library_names_spec='$libname.ixlibrary $libname.a'
-  # Create ${libname}_ixlibrary.a entries in /sys/libs.
-  finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
-  ;;
+if test -n "$CXX" && ( test "X$CXX" != "Xno" &&
+    ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) ||
+    (test "X$CXX" != "Xg++"))) ; then
+  ac_ext=cpp
+ac_cpp='$CXXCPP $CPPFLAGS'
+ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to run the C++ preprocessor" >&5
+$as_echo_n "checking how to run the C++ preprocessor... " >&6; }
+if test -z "$CXXCPP"; then
+  if test "${ac_cv_prog_CXXCPP+set}" = set; then :
+  $as_echo_n "(cached) " >&6
+else
+      # Double quotes because CXXCPP needs to be expanded
+    for CXXCPP in "$CXX -E" "/lib/cpp"
+    do
+      ac_preproc_ok=false
+for ac_cxx_preproc_warn_flag in '' yes
+do
+  # Use a header file that comes with gcc, so configuring glibc
+  # with a fresh cross-compiler works.
+  # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+  # <limits.h> exists even on freestanding compilers.
+  # On the NeXT, cc -E runs the code through the compiler's parser,
+  # not just through cpp. "Syntax error" is here to catch this case.
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+		     Syntax error
+_ACEOF
+if ac_fn_cxx_try_cpp "$LINENO"; then :
 
-beos*)
-  library_names_spec='${libname}${shared_ext}'
-  dynamic_linker="$host_os ld.so"
-  shlibpath_var=LIBRARY_PATH
-  ;;
+else
+  # Broken: fails on valid input.
+continue
+fi
+rm -f conftest.err conftest.$ac_ext
 
-bsdi[45]*)
-  version_type=linux
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
-  shlibpath_var=LD_LIBRARY_PATH
-  sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
-  sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
-  # the default ld.so.conf also contains /usr/contrib/lib and
-  # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
-  # libtool to hard-code these into programs
-  ;;
+  # OK, works on sane cases.  Now check whether nonexistent headers
+  # can be detected and how.
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <ac_nonexistent.h>
+_ACEOF
+if ac_fn_cxx_try_cpp "$LINENO"; then :
+  # Broken: success on invalid input.
+continue
+else
+  # Passes both tests.
+ac_preproc_ok=:
+break
+fi
+rm -f conftest.err conftest.$ac_ext
 
-cygwin* | mingw* | pw32*)
-  version_type=windows
-  shrext_cmds=".dll"
-  need_version=no
-  need_lib_prefix=no
+done
+# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
+rm -f conftest.err conftest.$ac_ext
+if $ac_preproc_ok; then :
+  break
+fi
 
-  case $GCC,$host_os in
-  yes,cygwin* | yes,mingw* | yes,pw32*)
-    library_names_spec='$libname.dll.a'
-    # DLL is installed to $(libdir)/../bin by postinstall_cmds
-    postinstall_cmds='base_file=`basename \${file}`~
-      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~
-      dldir=$destdir/`dirname \$dlpath`~
-      test -d \$dldir || mkdir -p \$dldir~
-      $install_prog $dir/$dlname \$dldir/$dlname~
-      chmod a+x \$dldir/$dlname'
-    postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
-      dlpath=$dir/\$dldll~
-       $rm \$dlpath'
-    shlibpath_overrides_runpath=yes
+    done
+    ac_cv_prog_CXXCPP=$CXXCPP
 
-    case $host_os in
-    cygwin*)
-      # Cygwin DLLs use 'cyg' prefix rather than 'lib'
-      soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
-      sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib"
-      ;;
-    mingw*)
-      # MinGW DLLs use traditional 'lib' prefix
-      soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
-      sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
-      if echo "$sys_lib_search_path_spec" | grep ';[c-zC-Z]:/' >/dev/null; then
-        # It is most probably a Windows format PATH printed by
-        # mingw gcc, but we are running on Cygwin. Gcc prints its search
-        # path with ; separators, and with drive letters. We can handle the
-        # drive letters (cygwin fileutils understands them), so leave them,
-        # especially as we might pass files found there to a mingw objdump,
-        # which wouldn't understand a cygwinified path. Ahh.
-        sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
-      else
-        sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED  -e "s/$PATH_SEPARATOR/ /g"`
-      fi
-      ;;
-    pw32*)
-      # pw32 DLLs use 'pw' prefix rather than 'lib'
-      library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
-      ;;
-    esac
-    ;;
+fi
+  CXXCPP=$ac_cv_prog_CXXCPP
+else
+  ac_cv_prog_CXXCPP=$CXXCPP
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $CXXCPP" >&5
+$as_echo "$CXXCPP" >&6; }
+ac_preproc_ok=false
+for ac_cxx_preproc_warn_flag in '' yes
+do
+  # Use a header file that comes with gcc, so configuring glibc
+  # with a fresh cross-compiler works.
+  # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+  # <limits.h> exists even on freestanding compilers.
+  # On the NeXT, cc -E runs the code through the compiler's parser,
+  # not just through cpp. "Syntax error" is here to catch this case.
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+		     Syntax error
+_ACEOF
+if ac_fn_cxx_try_cpp "$LINENO"; then :
 
-  *)
-    library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib'
-    ;;
-  esac
-  dynamic_linker='Win32 ld.exe'
-  # FIXME: first we should search . and the directory the executable is in
-  shlibpath_var=PATH
-  ;;
+else
+  # Broken: fails on valid input.
+continue
+fi
+rm -f conftest.err conftest.$ac_ext
 
-darwin* | rhapsody*)
-  dynamic_linker="$host_os dyld"
-  version_type=darwin
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext'
-  soname_spec='${libname}${release}${major}$shared_ext'
-  shlibpath_overrides_runpath=yes
-  shlibpath_var=DYLD_LIBRARY_PATH
-  shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
+  # OK, works on sane cases.  Now check whether nonexistent headers
+  # can be detected and how.
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <ac_nonexistent.h>
+_ACEOF
+if ac_fn_cxx_try_cpp "$LINENO"; then :
+  # Broken: success on invalid input.
+continue
+else
+  # Passes both tests.
+ac_preproc_ok=:
+break
+fi
+rm -f conftest.err conftest.$ac_ext
 
-  sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib"
-  sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
-  ;;
+done
+# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
+rm -f conftest.err conftest.$ac_ext
+if $ac_preproc_ok; then :
 
-dgux*)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  ;;
+else
+  { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+_lt_caught_CXX_error=yes; }
+fi
 
-freebsd1*)
-  dynamic_linker=no
-  ;;
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
 
-freebsd* | dragonfly*)
-  # DragonFly does not have aout.  When/if they implement a new
-  # versioning mechanism, adjust this.
-  if test -x /usr/bin/objformat; then
-    objformat=`/usr/bin/objformat`
-  else
-    case $host_os in
-    freebsd[123]*) objformat=aout ;;
-    *) objformat=elf ;;
-    esac
-  fi
-  version_type=freebsd-$objformat
-  case $version_type in
-    freebsd-elf*)
-      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
-      need_version=no
-      need_lib_prefix=no
-      ;;
-    freebsd-*)
-      library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
-      need_version=yes
-      ;;
-  esac
-  shlibpath_var=LD_LIBRARY_PATH
-  case $host_os in
-  freebsd2*)
-    shlibpath_overrides_runpath=yes
-    ;;
-  freebsd3.[01]* | freebsdelf3.[01]*)
-    shlibpath_overrides_runpath=yes
-    hardcode_into_libs=yes
-    ;;
-  freebsd3.[2-9]* | freebsdelf3.[2-9]* | \
-  freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1)
-    shlibpath_overrides_runpath=no
-    hardcode_into_libs=yes
-    ;;
-  *) # from 4.6 on, and DragonFly
-    shlibpath_overrides_runpath=yes
-    hardcode_into_libs=yes
-    ;;
-  esac
-  ;;
+else
+  _lt_caught_CXX_error=yes
+fi
 
-gnu*)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  hardcode_into_libs=yes
-  ;;
 
-hpux9* | hpux10* | hpux11*)
-  # Give a soname corresponding to the major version so that dld.sl refuses to
-  # link against other versions.
-  version_type=sunos
-  need_lib_prefix=no
-  need_version=no
-  case $host_cpu in
-  ia64*)
-    shrext_cmds='.so'
-    hardcode_into_libs=yes
-    dynamic_linker="$host_os dld.so"
-    shlibpath_var=LD_LIBRARY_PATH
-    shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
-    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-    soname_spec='${libname}${release}${shared_ext}$major'
-    if test "X$HPUX_IA64_MODE" = X32; then
-      sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
-    else
-      sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
-    fi
-    sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
-    ;;
-   hppa*64*)
-     shrext_cmds='.sl'
-     hardcode_into_libs=yes
-     dynamic_linker="$host_os dld.sl"
-     shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
-     shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
-     library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-     soname_spec='${libname}${release}${shared_ext}$major'
-     sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
-     sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
-     ;;
-   *)
-    shrext_cmds='.sl'
-    dynamic_linker="$host_os dld.sl"
-    shlibpath_var=SHLIB_PATH
-    shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
-    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-    soname_spec='${libname}${release}${shared_ext}$major'
-    ;;
-  esac
-  # HP-UX runs *really* slowly unless shared libraries are mode 555.
-  postinstall_cmds='chmod 555 $lib'
-  ;;
 
-interix[3-9]*)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=no
-  hardcode_into_libs=yes
-  ;;
 
-irix5* | irix6* | nonstopux*)
-  case $host_os in
-    nonstopux*) version_type=nonstopux ;;
-    *)
-	if test "$lt_cv_prog_gnu_ld" = yes; then
-		version_type=linux
-	else
-		version_type=irix
-	fi ;;
-  esac
-  need_lib_prefix=no
-  need_version=no
-  soname_spec='${libname}${release}${shared_ext}$major'
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
-  case $host_os in
-  irix5* | nonstopux*)
-    libsuff= shlibsuff=
-    ;;
-  *)
-    case $LD in # libtool.m4 will add one of these switches to LD
-    *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
-      libsuff= shlibsuff= libmagic=32-bit;;
-    *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
-      libsuff=32 shlibsuff=N32 libmagic=N32;;
-    *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
-      libsuff=64 shlibsuff=64 libmagic=64-bit;;
-    *) libsuff= shlibsuff= libmagic=never-match;;
-    esac
-    ;;
-  esac
-  shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
-  shlibpath_overrides_runpath=no
-  sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
-  sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
-  hardcode_into_libs=yes
-  ;;
 
-# No shared lib support for Linux oldld, aout, or coff.
-linux*oldld* | linux*aout* | linux*coff*)
-  dynamic_linker=no
-  ;;
+# Set options
 
-# This must be Linux ELF.
-linux* | k*bsd*-gnu)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=no
-  # This implies no fast_install, which is unacceptable.
-  # Some rework will be needed to allow for fast_install
-  # before this can be enabled.
-  hardcode_into_libs=yes
 
-  # find out which ABI we are using
-  libsuff=
-  case "$host_cpu" in
-  x86_64*|s390x*|powerpc64*)
-    echo '#line 10154 "configure"' > conftest.$ac_ext
-    if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; then
-      case `/usr/bin/file conftest.$ac_objext` in
-      *64-bit*)
-        libsuff=64
-        ;;
-      esac
-    fi
-    rm -rf conftest*
-    ;;
-  esac
 
-  sys_lib_dlsearch_path_spec="/lib${libsuff} /usr/lib${libsuff}"
+        enable_dlopen=no
 
-  # Append ld.so.conf contents to the search path
-  if test -f /etc/ld.so.conf; then
-    lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ 	]*hwcap[ 	]/d;s/[:,	]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
-    sys_lib_dlsearch_path_spec="$sys_lib_dlsearch_path_spec $lt_ld_extra"
-  fi
 
-  # We used to test for /lib/ld.so.1 and disable shared libraries on
-  # powerpc, because MkLinux only supported shared libraries with the
-  # GNU dynamic linker.  Since this was broken with cross compilers,
-  # most powerpc-linux boxes support dynamic linking these days and
-  # people can always --disable-shared, the test was removed, and we
-  # assume the GNU/Linux dynamic linker is in use.
-  dynamic_linker='GNU/Linux ld.so'
-  ;;
 
-netbsd*)
-  version_type=sunos
-  need_lib_prefix=no
-  need_version=no
-  if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
-    finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
-    dynamic_linker='NetBSD (a.out) ld.so'
-  else
-    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
-    soname_spec='${libname}${release}${shared_ext}$major'
-    dynamic_linker='NetBSD ld.elf_so'
-  fi
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
-  hardcode_into_libs=yes
-  ;;
 
-newsos6)
-  version_type=linux
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
-  ;;
+  # Check whether --enable-static was given.
+if test "${enable_static+set}" = set; then :
+  enableval=$enable_static; p=${PACKAGE-default}
+    case $enableval in
+    yes) enable_static=yes ;;
+    no) enable_static=no ;;
+    *)
+     enable_static=no
+      # Look at the argument we got.  We use all the common list separators.
+      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+      for pkg in $enableval; do
+	IFS="$lt_save_ifs"
+	if test "X$pkg" = "X$p"; then
+	  enable_static=yes
+	fi
+      done
+      IFS="$lt_save_ifs"
+      ;;
+    esac
+else
+  enable_static=yes
+fi
 
-nto-qnx*)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
-  ;;
 
-openbsd*)
-  version_type=sunos
-  sys_lib_dlsearch_path_spec="/usr/lib"
-  need_lib_prefix=no
-  # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
-  case $host_os in
-    openbsd3.3 | openbsd3.3.*) need_version=yes ;;
-    *)                         need_version=no  ;;
-  esac
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
-  finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
-  shlibpath_var=LD_LIBRARY_PATH
-  if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-    case $host_os in
-      openbsd2.[89] | openbsd2.[89].*)
-	shlibpath_overrides_runpath=no
-	;;
-      *)
-	shlibpath_overrides_runpath=yes
-	;;
-      esac
-  else
-    shlibpath_overrides_runpath=yes
-  fi
-  ;;
 
-os2*)
-  libname_spec='$name'
-  shrext_cmds=".dll"
-  need_lib_prefix=no
-  library_names_spec='$libname${shared_ext} $libname.a'
-  dynamic_linker='OS/2 ld.exe'
-  shlibpath_var=LIBPATH
-  ;;
 
-osf3* | osf4* | osf5*)
-  version_type=osf
-  need_lib_prefix=no
-  need_version=no
-  soname_spec='${libname}${release}${shared_ext}$major'
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  shlibpath_var=LD_LIBRARY_PATH
-  sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
-  sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
-  ;;
 
-rdos*)
-  dynamic_linker=no
-  ;;
 
-solaris*)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
-  hardcode_into_libs=yes
-  # ldd complains unless libraries are executable
-  postinstall_cmds='chmod +x $lib'
-  ;;
 
-sunos4*)
-  version_type=sunos
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
-  finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
-  if test "$with_gnu_ld" = yes; then
-    need_lib_prefix=no
-  fi
-  need_version=yes
-  ;;
 
-sysv4 | sysv4.3*)
-  version_type=linux
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  case $host_vendor in
-    sni)
-      shlibpath_overrides_runpath=no
-      need_lib_prefix=no
-      export_dynamic_flag_spec='${wl}-Blargedynsym'
-      runpath_var=LD_RUN_PATH
-      ;;
-    siemens)
-      need_lib_prefix=no
-      ;;
-    motorola)
-      need_lib_prefix=no
-      need_version=no
-      shlibpath_overrides_runpath=no
-      sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
-      ;;
-  esac
-  ;;
 
-sysv4*MP*)
-  if test -d /usr/nec ;then
-    version_type=linux
-    library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
-    soname_spec='$libname${shared_ext}.$major'
-    shlibpath_var=LD_LIBRARY_PATH
-  fi
-  ;;
 
-sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
-  version_type=freebsd-elf
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  hardcode_into_libs=yes
-  if test "$with_gnu_ld" = yes; then
-    sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
-    shlibpath_overrides_runpath=no
-  else
-    sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
-    shlibpath_overrides_runpath=yes
-    case $host_os in
-      sco3.2v5*)
-        sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
-	;;
-    esac
-  fi
-  sys_lib_dlsearch_path_spec='/usr/lib'
-  ;;
+# Check whether --with-pic was given.
+if test "${with_pic+set}" = set; then :
+  withval=$with_pic; pic_mode="$withval"
+else
+  pic_mode=default
+fi
 
-uts4*)
-  version_type=linux
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  ;;
 
-*)
-  dynamic_linker=no
-  ;;
-esac
-{ $as_echo "$as_me:$LINENO: result: $dynamic_linker" >&5
-$as_echo "$dynamic_linker" >&6; }
-test "$dynamic_linker" = no && can_build_shared=no
+test -z "$pic_mode" && pic_mode=default
 
-if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
-  lt_cv_sys_lib_search_path_spec="$sys_lib_search_path_spec"
-fi
 
-sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec"
-if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then
-  $as_echo_n "(cached) " >&6
+
+
+
+
+
+  # Check whether --enable-fast-install was given.
+if test "${enable_fast_install+set}" = set; then :
+  enableval=$enable_fast_install; p=${PACKAGE-default}
+    case $enableval in
+    yes) enable_fast_install=yes ;;
+    no) enable_fast_install=no ;;
+    *)
+      enable_fast_install=no
+      # Look at the argument we got.  We use all the common list separators.
+      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+      for pkg in $enableval; do
+	IFS="$lt_save_ifs"
+	if test "X$pkg" = "X$p"; then
+	  enable_fast_install=yes
+	fi
+      done
+      IFS="$lt_save_ifs"
+      ;;
+    esac
 else
-  lt_cv_sys_lib_dlsearch_path_spec="$sys_lib_dlsearch_path_spec"
+  enable_fast_install=yes
 fi
 
-sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec"
 
-variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
-if test "$GCC" = yes; then
-  variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
-fi
 
-{ $as_echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5
-$as_echo_n "checking how to hardcode library paths into programs... " >&6; }
-hardcode_action=
-if test -n "$hardcode_libdir_flag_spec" || \
-   test -n "$runpath_var" || \
-   test "X$hardcode_automatic" = "Xyes" ; then
 
-  # We can hardcode non-existant directories.
-  if test "$hardcode_direct" != no &&
-     # If the only mechanism to avoid hardcoding is shlibpath_var, we
-     # have to relink, otherwise we might link with an installed library
-     # when we should be linking with a yet-to-be-installed one
-     ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, )" != no &&
-     test "$hardcode_minus_L" != no; then
-    # Linking always hardcodes the temporary library directory.
-    hardcode_action=relink
-  else
-    # We can link without hardcoding, and we can hardcode nonexisting dirs.
-    hardcode_action=immediate
-  fi
-else
-  # We cannot hardcode anything, or else we can only hardcode existing
-  # directories.
-  hardcode_action=unsupported
-fi
-{ $as_echo "$as_me:$LINENO: result: $hardcode_action" >&5
-$as_echo "$hardcode_action" >&6; }
 
-if test "$hardcode_action" = relink; then
-  # Fast installation is not supported
-  enable_fast_install=no
-elif test "$shlibpath_overrides_runpath" = yes ||
-     test "$enable_shared" = no; then
-  # Fast installation is not necessary
-  enable_fast_install=needless
-fi
 
-striplib=
-old_striplib=
-{ $as_echo "$as_me:$LINENO: checking whether stripping libraries is possible" >&5
-$as_echo_n "checking whether stripping libraries is possible... " >&6; }
-if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then
-  test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
-  test -z "$striplib" && striplib="$STRIP --strip-unneeded"
-  { $as_echo "$as_me:$LINENO: result: yes" >&5
-$as_echo "yes" >&6; }
-else
-# FIXME - insert some real tests, host_os isn't really good enough
-  case $host_os in
-   darwin*)
-       if test -n "$STRIP" ; then
-         striplib="$STRIP -x"
-         old_striplib="$STRIP -S"
-         { $as_echo "$as_me:$LINENO: result: yes" >&5
-$as_echo "yes" >&6; }
-       else
-  { $as_echo "$as_me:$LINENO: result: no" >&5
-$as_echo "no" >&6; }
-fi
-       ;;
-   *)
-  { $as_echo "$as_me:$LINENO: result: no" >&5
-$as_echo "no" >&6; }
-    ;;
-  esac
-fi
 
-if test "x$enable_dlopen" != xyes; then
-  enable_dlopen=unknown
-  enable_dlopen_self=unknown
-  enable_dlopen_self_static=unknown
-else
-  lt_cv_dlopen=no
-  lt_cv_dlopen_libs=
 
-  case $host_os in
-  beos*)
-    lt_cv_dlopen="load_add_on"
-    lt_cv_dlopen_libs=
-    lt_cv_dlopen_self=yes
-    ;;
 
-  mingw* | pw32*)
-    lt_cv_dlopen="LoadLibrary"
-    lt_cv_dlopen_libs=
-   ;;
 
-  cygwin*)
-    lt_cv_dlopen="dlopen"
-    lt_cv_dlopen_libs=
-   ;;
 
-  darwin*)
-  # if libdl is installed we need to link against it
-    { $as_echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5
-$as_echo_n "checking for dlopen in -ldl... " >&6; }
-if test "${ac_cv_lib_dl_dlopen+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
-  ac_check_lib_save_LIBS=$LIBS
-LIBS="-ldl  $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
+# This can be used to rebuild libtool when needed
+LIBTOOL_DEPS="$ltmain"
 
-/* Override any GCC internal prototype to avoid an error.
-   Use char because int might match the return type of a GCC
-   builtin and then its argument prototype would still apply.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-char dlopen ();
-int
-main ()
-{
-return dlopen ();
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_link") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest$ac_exeext && {
-	 test "$cross_compiling" = yes ||
-	 $as_test_x conftest$ac_exeext
-       }; then
-  ac_cv_lib_dl_dlopen=yes
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
+# Always use our own libtool.
+LIBTOOL='$(SHELL) $(top_builddir)/libtool'
 
-	ac_cv_lib_dl_dlopen=no
-fi
 
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-      conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5
-$as_echo "$ac_cv_lib_dl_dlopen" >&6; }
-if test "x$ac_cv_lib_dl_dlopen" = x""yes; then
-  lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
-else
 
-    lt_cv_dlopen="dyld"
-    lt_cv_dlopen_libs=
-    lt_cv_dlopen_self=yes
 
-fi
 
-   ;;
 
-  *)
-    { $as_echo "$as_me:$LINENO: checking for shl_load" >&5
-$as_echo_n "checking for shl_load... " >&6; }
-if test "${ac_cv_func_shl_load+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-/* Define shl_load to an innocuous variant, in case <limits.h> declares shl_load.
-   For example, HP-UX 11i <limits.h> declares gettimeofday.  */
-#define shl_load innocuous_shl_load
 
-/* System header to define __stub macros and hopefully few prototypes,
-    which can conflict with char shl_load (); below.
-    Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-    <limits.h> exists even on freestanding compilers.  */
 
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
 
-#undef shl_load
 
-/* Override any GCC internal prototype to avoid an error.
-   Use char because int might match the return type of a GCC
-   builtin and then its argument prototype would still apply.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-char shl_load ();
-/* The GNU C library defines this for functions which it implements
-    to always fail with ENOSYS.  Some functions are actually named
-    something starting with __ and the normal name is an alias.  */
-#if defined __stub_shl_load || defined __stub___shl_load
-choke me
-#endif
 
-int
-main ()
-{
-return shl_load ();
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_link") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest$ac_exeext && {
-	 test "$cross_compiling" = yes ||
-	 $as_test_x conftest$ac_exeext
-       }; then
-  ac_cv_func_shl_load=yes
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
 
-	ac_cv_func_shl_load=no
-fi
 
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-      conftest$ac_exeext conftest.$ac_ext
-fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_func_shl_load" >&5
-$as_echo "$ac_cv_func_shl_load" >&6; }
-if test "x$ac_cv_func_shl_load" = x""yes; then
-  lt_cv_dlopen="shl_load"
-else
-  { $as_echo "$as_me:$LINENO: checking for shl_load in -ldld" >&5
-$as_echo_n "checking for shl_load in -ldld... " >&6; }
-if test "${ac_cv_lib_dld_shl_load+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
-  ac_check_lib_save_LIBS=$LIBS
-LIBS="-ldld  $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
 
-/* Override any GCC internal prototype to avoid an error.
-   Use char because int might match the return type of a GCC
-   builtin and then its argument prototype would still apply.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-char shl_load ();
-int
-main ()
-{
-return shl_load ();
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_link") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest$ac_exeext && {
-	 test "$cross_compiling" = yes ||
-	 $as_test_x conftest$ac_exeext
-       }; then
-  ac_cv_lib_dld_shl_load=yes
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
 
-	ac_cv_lib_dld_shl_load=no
-fi
 
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-      conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_dld_shl_load" >&5
-$as_echo "$ac_cv_lib_dld_shl_load" >&6; }
-if test "x$ac_cv_lib_dld_shl_load" = x""yes; then
-  lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld"
-else
-  { $as_echo "$as_me:$LINENO: checking for dlopen" >&5
-$as_echo_n "checking for dlopen... " >&6; }
-if test "${ac_cv_func_dlopen+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-/* Define dlopen to an innocuous variant, in case <limits.h> declares dlopen.
-   For example, HP-UX 11i <limits.h> declares gettimeofday.  */
-#define dlopen innocuous_dlopen
 
-/* System header to define __stub macros and hopefully few prototypes,
-    which can conflict with char dlopen (); below.
-    Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-    <limits.h> exists even on freestanding compilers.  */
 
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
 
-#undef dlopen
 
-/* Override any GCC internal prototype to avoid an error.
-   Use char because int might match the return type of a GCC
-   builtin and then its argument prototype would still apply.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-char dlopen ();
-/* The GNU C library defines this for functions which it implements
-    to always fail with ENOSYS.  Some functions are actually named
-    something starting with __ and the normal name is an alias.  */
-#if defined __stub_dlopen || defined __stub___dlopen
-choke me
-#endif
 
-int
-main ()
-{
-return dlopen ();
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_link") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest$ac_exeext && {
-	 test "$cross_compiling" = yes ||
-	 $as_test_x conftest$ac_exeext
-       }; then
-  ac_cv_func_dlopen=yes
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
 
-	ac_cv_func_dlopen=no
-fi
 
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-      conftest$ac_exeext conftest.$ac_ext
-fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_func_dlopen" >&5
-$as_echo "$ac_cv_func_dlopen" >&6; }
-if test "x$ac_cv_func_dlopen" = x""yes; then
-  lt_cv_dlopen="dlopen"
-else
-  { $as_echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5
-$as_echo_n "checking for dlopen in -ldl... " >&6; }
-if test "${ac_cv_lib_dl_dlopen+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
-  ac_check_lib_save_LIBS=$LIBS
-LIBS="-ldl  $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
 
-/* Override any GCC internal prototype to avoid an error.
-   Use char because int might match the return type of a GCC
-   builtin and then its argument prototype would still apply.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-char dlopen ();
-int
-main ()
-{
-return dlopen ();
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_link") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest$ac_exeext && {
-	 test "$cross_compiling" = yes ||
-	 $as_test_x conftest$ac_exeext
-       }; then
-  ac_cv_lib_dl_dlopen=yes
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
 
-	ac_cv_lib_dl_dlopen=no
-fi
+test -z "$LN_S" && LN_S="ln -s"
 
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-      conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5
-$as_echo "$ac_cv_lib_dl_dlopen" >&6; }
-if test "x$ac_cv_lib_dl_dlopen" = x""yes; then
-  lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
-else
-  { $as_echo "$as_me:$LINENO: checking for dlopen in -lsvld" >&5
-$as_echo_n "checking for dlopen in -lsvld... " >&6; }
-if test "${ac_cv_lib_svld_dlopen+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
-  ac_check_lib_save_LIBS=$LIBS
-LIBS="-lsvld  $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
 
-/* Override any GCC internal prototype to avoid an error.
-   Use char because int might match the return type of a GCC
-   builtin and then its argument prototype would still apply.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-char dlopen ();
-int
-main ()
-{
-return dlopen ();
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_link") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest$ac_exeext && {
-	 test "$cross_compiling" = yes ||
-	 $as_test_x conftest$ac_exeext
-       }; then
-  ac_cv_lib_svld_dlopen=yes
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
 
-	ac_cv_lib_svld_dlopen=no
-fi
 
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-      conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_svld_dlopen" >&5
-$as_echo "$ac_cv_lib_svld_dlopen" >&6; }
-if test "x$ac_cv_lib_svld_dlopen" = x""yes; then
-  lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"
-else
-  { $as_echo "$as_me:$LINENO: checking for dld_link in -ldld" >&5
-$as_echo_n "checking for dld_link in -ldld... " >&6; }
-if test "${ac_cv_lib_dld_dld_link+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
-  ac_check_lib_save_LIBS=$LIBS
-LIBS="-ldld  $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
 
-/* Override any GCC internal prototype to avoid an error.
-   Use char because int might match the return type of a GCC
-   builtin and then its argument prototype would still apply.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-char dld_link ();
-int
-main ()
-{
-return dld_link ();
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_link") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest$ac_exeext && {
-	 test "$cross_compiling" = yes ||
-	 $as_test_x conftest$ac_exeext
-       }; then
-  ac_cv_lib_dld_dld_link=yes
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
 
-	ac_cv_lib_dld_dld_link=no
-fi
 
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-      conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_dld_dld_link" >&5
-$as_echo "$ac_cv_lib_dld_dld_link" >&6; }
-if test "x$ac_cv_lib_dld_dld_link" = x""yes; then
-  lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld"
-fi
 
 
-fi
 
 
-fi
 
 
-fi
 
+if test -n "${ZSH_VERSION+set}" ; then
+   setopt NO_GLOB_SUBST
+fi
 
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for objdir" >&5
+$as_echo_n "checking for objdir... " >&6; }
+if test "${lt_cv_objdir+set}" = set; then :
+  $as_echo_n "(cached) " >&6
+else
+  rm -f .libs 2>/dev/null
+mkdir .libs 2>/dev/null
+if test -d .libs; then
+  lt_cv_objdir=.libs
+else
+  # MS-DOS does not allow filenames that begin with a dot.
+  lt_cv_objdir=_libs
+fi
+rmdir .libs 2>/dev/null
 fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_objdir" >&5
+$as_echo "$lt_cv_objdir" >&6; }
+objdir=$lt_cv_objdir
 
 
-fi
 
-    ;;
-  esac
 
-  if test "x$lt_cv_dlopen" != xno; then
-    enable_dlopen=yes
-  else
-    enable_dlopen=no
-  fi
 
-  case $lt_cv_dlopen in
-  dlopen)
-    save_CPPFLAGS="$CPPFLAGS"
-    test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
+cat >>confdefs.h <<_ACEOF
+#define LT_OBJDIR "$lt_cv_objdir/"
+_ACEOF
 
-    save_LDFLAGS="$LDFLAGS"
-    wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
 
-    save_LIBS="$LIBS"
-    LIBS="$lt_cv_dlopen_libs $LIBS"
 
-    { $as_echo "$as_me:$LINENO: checking whether a program can dlopen itself" >&5
-$as_echo_n "checking whether a program can dlopen itself... " >&6; }
-if test "${lt_cv_dlopen_self+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
-  	  if test "$cross_compiling" = yes; then :
-  lt_cv_dlopen_self=cross
-else
-  lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
-  lt_status=$lt_dlunknown
-  cat > conftest.$ac_ext <<EOF
-#line 11055 "configure"
-#include "confdefs.h"
 
-#if HAVE_DLFCN_H
-#include <dlfcn.h>
-#endif
 
-#include <stdio.h>
 
-#ifdef RTLD_GLOBAL
-#  define LT_DLGLOBAL		RTLD_GLOBAL
-#else
-#  ifdef DL_GLOBAL
-#    define LT_DLGLOBAL		DL_GLOBAL
-#  else
-#    define LT_DLGLOBAL		0
-#  endif
-#endif
 
-/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
-   find out it does not work in some platform. */
-#ifndef LT_DLLAZY_OR_NOW
-#  ifdef RTLD_LAZY
-#    define LT_DLLAZY_OR_NOW		RTLD_LAZY
-#  else
-#    ifdef DL_LAZY
-#      define LT_DLLAZY_OR_NOW		DL_LAZY
-#    else
-#      ifdef RTLD_NOW
-#        define LT_DLLAZY_OR_NOW	RTLD_NOW
-#      else
-#        ifdef DL_NOW
-#          define LT_DLLAZY_OR_NOW	DL_NOW
-#        else
-#          define LT_DLLAZY_OR_NOW	0
-#        endif
-#      endif
-#    endif
-#  endif
-#endif
 
-#ifdef __cplusplus
-extern "C" void exit (int);
-#endif
 
-void fnord() { int i=42;}
-int main ()
-{
-  void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
-  int status = $lt_dlunknown;
 
-  if (self)
-    {
-      if (dlsym (self,"fnord"))       status = $lt_dlno_uscore;
-      else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
-      /* dlclose (self); */
-    }
-  else
-    puts (dlerror ());
 
-    exit (status);
-}
-EOF
-  if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then
-    (./conftest; exit; ) >&5 2>/dev/null
-    lt_status=$?
-    case x$lt_status in
-      x$lt_dlno_uscore) lt_cv_dlopen_self=yes ;;
-      x$lt_dlneed_uscore) lt_cv_dlopen_self=yes ;;
-      x$lt_dlunknown|x*) lt_cv_dlopen_self=no ;;
-    esac
-  else :
-    # compilation failed
-    lt_cv_dlopen_self=no
-  fi
-fi
-rm -fr conftest*
 
 
-fi
-{ $as_echo "$as_me:$LINENO: result: $lt_cv_dlopen_self" >&5
-$as_echo "$lt_cv_dlopen_self" >&6; }
 
-    if test "x$lt_cv_dlopen_self" = xyes; then
-      wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\"
-      { $as_echo "$as_me:$LINENO: checking whether a statically linked program can dlopen itself" >&5
-$as_echo_n "checking whether a statically linked program can dlopen itself... " >&6; }
-if test "${lt_cv_dlopen_self_static+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
-  	  if test "$cross_compiling" = yes; then :
-  lt_cv_dlopen_self_static=cross
-else
-  lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
-  lt_status=$lt_dlunknown
-  cat > conftest.$ac_ext <<EOF
-#line 11155 "configure"
-#include "confdefs.h"
 
-#if HAVE_DLFCN_H
-#include <dlfcn.h>
-#endif
 
-#include <stdio.h>
 
-#ifdef RTLD_GLOBAL
-#  define LT_DLGLOBAL		RTLD_GLOBAL
-#else
-#  ifdef DL_GLOBAL
-#    define LT_DLGLOBAL		DL_GLOBAL
-#  else
-#    define LT_DLGLOBAL		0
-#  endif
-#endif
+case $host_os in
+aix3*)
+  # AIX sometimes has problems with the GCC collect2 program.  For some
+  # reason, if we set the COLLECT_NAMES environment variable, the problems
+  # vanish in a puff of smoke.
+  if test "X${COLLECT_NAMES+set}" != Xset; then
+    COLLECT_NAMES=
+    export COLLECT_NAMES
+  fi
+  ;;
+esac
 
-/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
-   find out it does not work in some platform. */
-#ifndef LT_DLLAZY_OR_NOW
-#  ifdef RTLD_LAZY
-#    define LT_DLLAZY_OR_NOW		RTLD_LAZY
-#  else
-#    ifdef DL_LAZY
-#      define LT_DLLAZY_OR_NOW		DL_LAZY
-#    else
-#      ifdef RTLD_NOW
-#        define LT_DLLAZY_OR_NOW	RTLD_NOW
-#      else
-#        ifdef DL_NOW
-#          define LT_DLLAZY_OR_NOW	DL_NOW
-#        else
-#          define LT_DLLAZY_OR_NOW	0
-#        endif
-#      endif
-#    endif
-#  endif
-#endif
+# Sed substitution that helps us do robust quoting.  It backslashifies
+# metacharacters that are still active within double-quoted strings.
+sed_quote_subst='s/\(["`$\\]\)/\\\1/g'
 
-#ifdef __cplusplus
-extern "C" void exit (int);
-#endif
+# Same as above, but do not quote variable references.
+double_quote_subst='s/\(["`\\]\)/\\\1/g'
 
-void fnord() { int i=42;}
-int main ()
-{
-  void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
-  int status = $lt_dlunknown;
+# Sed substitution to delay expansion of an escaped shell variable in a
+# double_quote_subst'ed string.
+delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
 
-  if (self)
-    {
-      if (dlsym (self,"fnord"))       status = $lt_dlno_uscore;
-      else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
-      /* dlclose (self); */
-    }
-  else
-    puts (dlerror ());
+# Sed substitution to delay expansion of an escaped single quote.
+delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g'
 
-    exit (status);
-}
-EOF
-  if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then
-    (./conftest; exit; ) >&5 2>/dev/null
-    lt_status=$?
-    case x$lt_status in
-      x$lt_dlno_uscore) lt_cv_dlopen_self_static=yes ;;
-      x$lt_dlneed_uscore) lt_cv_dlopen_self_static=yes ;;
-      x$lt_dlunknown|x*) lt_cv_dlopen_self_static=no ;;
-    esac
-  else :
-    # compilation failed
-    lt_cv_dlopen_self_static=no
-  fi
-fi
-rm -fr conftest*
+# Sed substitution to avoid accidental globbing in evaled expressions
+no_glob_subst='s/\*/\\\*/g'
 
+# Global variables:
+ofile=libtool
+can_build_shared=yes
 
-fi
-{ $as_echo "$as_me:$LINENO: result: $lt_cv_dlopen_self_static" >&5
-$as_echo "$lt_cv_dlopen_self_static" >&6; }
-    fi
+# All known linkers require a `.a' archive for static linking (except MSVC,
+# which needs '.lib').
+libext=a
 
-    CPPFLAGS="$save_CPPFLAGS"
-    LDFLAGS="$save_LDFLAGS"
-    LIBS="$save_LIBS"
-    ;;
-  esac
+with_gnu_ld="$lt_cv_prog_gnu_ld"
 
-  case $lt_cv_dlopen_self in
-  yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;;
-  *) enable_dlopen_self=unknown ;;
-  esac
+old_CC="$CC"
+old_CFLAGS="$CFLAGS"
 
-  case $lt_cv_dlopen_self_static in
-  yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;;
-  *) enable_dlopen_self_static=unknown ;;
+# Set sane defaults for various variables
+test -z "$CC" && CC=cc
+test -z "$LTCC" && LTCC=$CC
+test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS
+test -z "$LD" && LD=ld
+test -z "$ac_objext" && ac_objext=o
+
+for cc_temp in $compiler""; do
+  case $cc_temp in
+    compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
+    distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
+    \-*) ;;
+    *) break;;
   esac
-fi
+done
+cc_basename=`$ECHO "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
 
 
-# Report which library types will actually be built
-{ $as_echo "$as_me:$LINENO: checking if libtool supports shared libraries" >&5
-$as_echo_n "checking if libtool supports shared libraries... " >&6; }
-{ $as_echo "$as_me:$LINENO: result: $can_build_shared" >&5
-$as_echo "$can_build_shared" >&6; }
+# Only perform the check for file, if the check method requires it
+test -z "$MAGIC_CMD" && MAGIC_CMD=file
+case $deplibs_check_method in
+file_magic*)
+  if test "$file_magic_cmd" = '$MAGIC_CMD'; then
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ${ac_tool_prefix}file" >&5
+$as_echo_n "checking for ${ac_tool_prefix}file... " >&6; }
+if test "${lt_cv_path_MAGIC_CMD+set}" = set; then :
+  $as_echo_n "(cached) " >&6
+else
+  case $MAGIC_CMD in
+[\\/*] |  ?:[\\/]*)
+  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
+  ;;
+*)
+  lt_save_MAGIC_CMD="$MAGIC_CMD"
+  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+  ac_dummy="/usr/bin$PATH_SEPARATOR$PATH"
+  for ac_dir in $ac_dummy; do
+    IFS="$lt_save_ifs"
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/${ac_tool_prefix}file; then
+      lt_cv_path_MAGIC_CMD="$ac_dir/${ac_tool_prefix}file"
+      if test -n "$file_magic_test_file"; then
+	case $deplibs_check_method in
+	"file_magic "*)
+	  file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
+	  MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+	  if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
+	    $EGREP "$file_magic_regex" > /dev/null; then
+	    :
+	  else
+	    cat <<_LT_EOF 1>&2
 
-{ $as_echo "$as_me:$LINENO: checking whether to build shared libraries" >&5
-$as_echo_n "checking whether to build shared libraries... " >&6; }
-test "$can_build_shared" = "no" && enable_shared=no
+*** Warning: the command libtool uses to detect shared libraries,
+*** $file_magic_cmd, produces output that libtool cannot recognize.
+*** The result is that libtool may fail to recognize shared libraries
+*** as such.  This will affect the creation of libtool libraries that
+*** depend on shared libraries, but programs linked with such libtool
+*** libraries will work regardless of this problem.  Nevertheless, you
+*** may want to report the problem to your system manager and/or to
+*** bug-libtool@gnu.org
 
-# On AIX, shared libraries and static libraries use the same namespace, and
-# are all built from PIC.
-case $host_os in
-aix3*)
-  test "$enable_shared" = yes && enable_static=no
-  if test -n "$RANLIB"; then
-    archive_cmds="$archive_cmds~\$RANLIB \$lib"
-    postinstall_cmds='$RANLIB $lib'
-  fi
+_LT_EOF
+	  fi ;;
+	esac
+      fi
+      break
+    fi
+  done
+  IFS="$lt_save_ifs"
+  MAGIC_CMD="$lt_save_MAGIC_CMD"
   ;;
-
-aix[4-9]*)
-  if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
-    test "$enable_shared" = yes && enable_static=no
-  fi
-    ;;
 esac
-{ $as_echo "$as_me:$LINENO: result: $enable_shared" >&5
-$as_echo "$enable_shared" >&6; }
+fi
 
-{ $as_echo "$as_me:$LINENO: checking whether to build static libraries" >&5
-$as_echo_n "checking whether to build static libraries... " >&6; }
-# Make sure either enable_shared or enable_static is yes.
-test "$enable_shared" = yes || enable_static=yes
-{ $as_echo "$as_me:$LINENO: result: $enable_static" >&5
-$as_echo "$enable_static" >&6; }
+MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+if test -n "$MAGIC_CMD"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MAGIC_CMD" >&5
+$as_echo "$MAGIC_CMD" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
 
-# The else clause should only fire when bootstrapping the
-# libtool distribution, otherwise you forgot to ship ltmain.sh
-# with your package, and you will get complaints that there are
-# no rules to generate ltmain.sh.
-if test -f "$ltmain"; then
-  # See if we are running on zsh, and set the options which allow our commands through
-  # without removal of \ escapes.
-  if test -n "${ZSH_VERSION+set}" ; then
-    setopt NO_GLOB_SUBST
-  fi
-  # Now quote all the things that may contain metacharacters while being
-  # careful not to overquote the AC_SUBSTed values.  We take copies of the
-  # variables and quote the copies for generation of the libtool script.
-  for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \
-    SED SHELL STRIP \
-    libname_spec library_names_spec soname_spec extract_expsyms_cmds \
-    old_striplib striplib file_magic_cmd finish_cmds finish_eval \
-    deplibs_check_method reload_flag reload_cmds need_locks \
-    lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \
-    lt_cv_sys_global_symbol_to_c_name_address \
-    sys_lib_search_path_spec sys_lib_dlsearch_path_spec \
-    old_postinstall_cmds old_postuninstall_cmds \
-    compiler \
-    CC \
-    LD \
-    lt_prog_compiler_wl \
-    lt_prog_compiler_pic \
-    lt_prog_compiler_static \
-    lt_prog_compiler_no_builtin_flag \
-    export_dynamic_flag_spec \
-    thread_safe_flag_spec \
-    whole_archive_flag_spec \
-    enable_shared_with_static_runtimes \
-    old_archive_cmds \
-    old_archive_from_new_cmds \
-    predep_objects \
-    postdep_objects \
-    predeps \
-    postdeps \
-    compiler_lib_search_path \
-    compiler_lib_search_dirs \
-    archive_cmds \
-    archive_expsym_cmds \
-    postinstall_cmds \
-    postuninstall_cmds \
-    old_archive_from_expsyms_cmds \
-    allow_undefined_flag \
-    no_undefined_flag \
-    export_symbols_cmds \
-    hardcode_libdir_flag_spec \
-    hardcode_libdir_flag_spec_ld \
-    hardcode_libdir_separator \
-    hardcode_automatic \
-    module_cmds \
-    module_expsym_cmds \
-    lt_cv_prog_compiler_c_o \
-    fix_srcfile_path \
-    exclude_expsyms \
-    include_expsyms; do
-
-    case $var in
-    old_archive_cmds | \
-    old_archive_from_new_cmds | \
-    archive_cmds | \
-    archive_expsym_cmds | \
-    module_cmds | \
-    module_expsym_cmds | \
-    old_archive_from_expsyms_cmds | \
-    export_symbols_cmds | \
-    extract_expsyms_cmds | reload_cmds | finish_cmds | \
-    postinstall_cmds | postuninstall_cmds | \
-    old_postinstall_cmds | old_postuninstall_cmds | \
-    sys_lib_search_path_spec | sys_lib_dlsearch_path_spec)
-      # Double-quote double-evaled strings.
-      eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\""
-      ;;
-    *)
-      eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\""
-      ;;
-    esac
-  done
 
-  case $lt_echo in
-  *'\$0 --fallback-echo"')
-    lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'`
-    ;;
-  esac
 
-cfgfile="${ofile}T"
-  trap "$rm \"$cfgfile\"; exit 1" 1 2 15
-  $rm -f "$cfgfile"
-  { $as_echo "$as_me:$LINENO: creating $ofile" >&5
-$as_echo "$as_me: creating $ofile" >&6;}
 
-  cat <<__EOF__ >> "$cfgfile"
-#! $SHELL
 
-# `$echo "$cfgfile" | sed 's%^.*/%%'` - Provide generalized library-building support services.
-# Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP)
-# NOTE: Changes made to this file will be lost: look at ltmain.sh.
-#
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008
-# Free Software Foundation, Inc.
-#
-# This file is part of GNU Libtool:
-# Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
-#
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
+if test -z "$lt_cv_path_MAGIC_CMD"; then
+  if test -n "$ac_tool_prefix"; then
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for file" >&5
+$as_echo_n "checking for file... " >&6; }
+if test "${lt_cv_path_MAGIC_CMD+set}" = set; then :
+  $as_echo_n "(cached) " >&6
+else
+  case $MAGIC_CMD in
+[\\/*] |  ?:[\\/]*)
+  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
+  ;;
+*)
+  lt_save_MAGIC_CMD="$MAGIC_CMD"
+  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+  ac_dummy="/usr/bin$PATH_SEPARATOR$PATH"
+  for ac_dir in $ac_dummy; do
+    IFS="$lt_save_ifs"
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/file; then
+      lt_cv_path_MAGIC_CMD="$ac_dir/file"
+      if test -n "$file_magic_test_file"; then
+	case $deplibs_check_method in
+	"file_magic "*)
+	  file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
+	  MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+	  if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
+	    $EGREP "$file_magic_regex" > /dev/null; then
+	    :
+	  else
+	    cat <<_LT_EOF 1>&2
 
-# A sed program that does not truncate output.
-SED=$lt_SED
+*** Warning: the command libtool uses to detect shared libraries,
+*** $file_magic_cmd, produces output that libtool cannot recognize.
+*** The result is that libtool may fail to recognize shared libraries
+*** as such.  This will affect the creation of libtool libraries that
+*** depend on shared libraries, but programs linked with such libtool
+*** libraries will work regardless of this problem.  Nevertheless, you
+*** may want to report the problem to your system manager and/or to
+*** bug-libtool@gnu.org
 
-# Sed that helps us avoid accidentally triggering echo(1) options like -n.
-Xsed="$SED -e 1s/^X//"
+_LT_EOF
+	  fi ;;
+	esac
+      fi
+      break
+    fi
+  done
+  IFS="$lt_save_ifs"
+  MAGIC_CMD="$lt_save_MAGIC_CMD"
+  ;;
+esac
+fi
 
-# The HP-UX ksh and POSIX shell print the target directory to stdout
-# if CDPATH is set.
-(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+if test -n "$MAGIC_CMD"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MAGIC_CMD" >&5
+$as_echo "$MAGIC_CMD" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
 
-# The names of the tagged configurations supported by this script.
-available_tags=
 
-# ### BEGIN LIBTOOL CONFIG
-
-# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
+  else
+    MAGIC_CMD=:
+  fi
+fi
 
-# Shell to use when invoking shell scripts.
-SHELL=$lt_SHELL
+  fi
+  ;;
+esac
 
-# Whether or not to build shared libraries.
-build_libtool_libs=$enable_shared
+# Use C for the default configuration in the libtool script
 
-# Whether or not to build static libraries.
-build_old_libs=$enable_static
+lt_save_CC="$CC"
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
 
-# Whether or not to add -lc for building shared libraries.
-build_libtool_need_lc=$archive_cmds_need_lc
 
-# Whether or not to disallow shared libs when runtime libs are static
-allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes
+# Source file extension for C test sources.
+ac_ext=c
 
-# Whether or not to optimize for fast installation.
-fast_install=$enable_fast_install
+# Object file extension for compiled C test sources.
+objext=o
+objext=$objext
 
-# The host system.
-host_alias=$host_alias
-host=$host
-host_os=$host_os
+# Code to be used in simple compile tests
+lt_simple_compile_test_code="int some_variable = 0;"
 
-# The build system.
-build_alias=$build_alias
-build=$build
-build_os=$build_os
+# Code to be used in simple link tests
+lt_simple_link_test_code='int main(){return(0);}'
 
-# An echo program that does not interpret backslashes.
-echo=$lt_echo
 
-# The archiver.
-AR=$lt_AR
-AR_FLAGS=$lt_AR_FLAGS
 
-# A C compiler.
-LTCC=$lt_LTCC
 
-# LTCC compiler flags.
-LTCFLAGS=$lt_LTCFLAGS
 
-# A language-specific compiler.
-CC=$lt_compiler
 
-# Is the compiler the GNU C compiler?
-with_gcc=$GCC
 
-# An ERE matcher.
-EGREP=$lt_EGREP
+# If no C compiler was specified, use CC.
+LTCC=${LTCC-"$CC"}
 
-# The linker used to build libraries.
-LD=$lt_LD
+# If no C compiler flags were specified, use CFLAGS.
+LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
 
-# Whether we need hard or soft links.
-LN_S=$lt_LN_S
+# Allow CC to be a program name with arguments.
+compiler=$CC
 
-# A BSD-compatible nm program.
-NM=$lt_NM
+# Save the default compiler, since it gets overwritten when the other
+# tags are being tested, and _LT_TAGVAR(compiler, []) is a NOP.
+compiler_DEFAULT=$CC
 
-# A symbol stripping program
-STRIP=$lt_STRIP
+# save warnings/boilerplate of simple test code
+ac_outfile=conftest.$ac_objext
+echo "$lt_simple_compile_test_code" >conftest.$ac_ext
+eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_compiler_boilerplate=`cat conftest.err`
+$RM conftest*
 
-# Used to examine libraries when file_magic_cmd begins "file"
-MAGIC_CMD=$MAGIC_CMD
+ac_outfile=conftest.$ac_objext
+echo "$lt_simple_link_test_code" >conftest.$ac_ext
+eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_linker_boilerplate=`cat conftest.err`
+$RM -r conftest*
 
-# Used on cygwin: DLL creation program.
-DLLTOOL="$DLLTOOL"
 
-# Used on cygwin: object dumper.
-OBJDUMP="$OBJDUMP"
+if test -n "$compiler"; then
 
-# Used on cygwin: assembler.
-AS="$AS"
+lt_prog_compiler_no_builtin_flag=
 
-# The name of the directory that contains temporary libtool files.
-objdir=$objdir
+if test "$GCC" = yes; then
+  lt_prog_compiler_no_builtin_flag=' -fno-builtin'
 
-# How to create reloadable object files.
-reload_flag=$lt_reload_flag
-reload_cmds=$lt_reload_cmds
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -fno-rtti -fno-exceptions" >&5
+$as_echo_n "checking if $compiler supports -fno-rtti -fno-exceptions... " >&6; }
+if test "${lt_cv_prog_compiler_rtti_exceptions+set}" = set; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_prog_compiler_rtti_exceptions=no
+   ac_outfile=conftest.$ac_objext
+   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+   lt_compiler_flag="-fno-rtti -fno-exceptions"
+   # Insert the option either (1) after the last *FLAGS variable, or
+   # (2) before a word containing "conftest.", or (3) at the end.
+   # Note that $ac_compile itself does not contain backslashes and begins
+   # with a dollar sign (not a hyphen), so the echo should work correctly.
+   # The option is referenced via a variable to avoid confusing sed.
+   lt_compile=`echo "$ac_compile" | $SED \
+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+   -e 's:$: $lt_compiler_flag:'`
+   (eval echo "\"\$as_me:8896: $lt_compile\"" >&5)
+   (eval "$lt_compile" 2>conftest.err)
+   ac_status=$?
+   cat conftest.err >&5
+   echo "$as_me:8900: \$? = $ac_status" >&5
+   if (exit $ac_status) && test -s "$ac_outfile"; then
+     # The compiler can only warn and ignore the option if not recognized
+     # So say no if there are warnings other than the usual output.
+     $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
+     $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+     if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
+       lt_cv_prog_compiler_rtti_exceptions=yes
+     fi
+   fi
+   $RM conftest*
 
-# How to pass a linker flag through the compiler.
-wl=$lt_lt_prog_compiler_wl
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_rtti_exceptions" >&5
+$as_echo "$lt_cv_prog_compiler_rtti_exceptions" >&6; }
 
-# Object file suffix (normally "o").
-objext="$ac_objext"
+if test x"$lt_cv_prog_compiler_rtti_exceptions" = xyes; then
+    lt_prog_compiler_no_builtin_flag="$lt_prog_compiler_no_builtin_flag -fno-rtti -fno-exceptions"
+else
+    :
+fi
 
-# Old archive suffix (normally "a").
-libext="$libext"
+fi
 
-# Shared library suffix (normally ".so").
-shrext_cmds='$shrext_cmds'
 
-# Executable file suffix (normally "").
-exeext="$exeext"
 
-# Additional compiler flags for building library objects.
-pic_flag=$lt_lt_prog_compiler_pic
-pic_mode=$pic_mode
 
-# What is the maximum length of a command?
-max_cmd_len=$lt_cv_sys_max_cmd_len
 
-# Does compiler simultaneously support -c and -o options?
-compiler_c_o=$lt_lt_cv_prog_compiler_c_o
 
-# Must we lock files when doing compilation?
-need_locks=$lt_need_locks
+  lt_prog_compiler_wl=
+lt_prog_compiler_pic=
+lt_prog_compiler_static=
 
-# Do we need the lib prefix for modules?
-need_lib_prefix=$need_lib_prefix
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $compiler option to produce PIC" >&5
+$as_echo_n "checking for $compiler option to produce PIC... " >&6; }
 
-# Do we need a version for libraries?
-need_version=$need_version
+  if test "$GCC" = yes; then
+    lt_prog_compiler_wl='-Wl,'
+    lt_prog_compiler_static='-static'
 
-# Whether dlopen is supported.
-dlopen_support=$enable_dlopen
+    case $host_os in
+      aix*)
+      # All AIX code is PIC.
+      if test "$host_cpu" = ia64; then
+	# AIX 5 now supports IA64 processor
+	lt_prog_compiler_static='-Bstatic'
+      fi
+      ;;
 
-# Whether dlopen of programs is supported.
-dlopen_self=$enable_dlopen_self
+    amigaos*)
+      case $host_cpu in
+      powerpc)
+            # see comment about AmigaOS4 .so support
+            lt_prog_compiler_pic='-fPIC'
+        ;;
+      m68k)
+            # FIXME: we need at least 68020 code to build shared libraries, but
+            # adding the `-m68020' flag to GCC prevents building anything better,
+            # like `-m68040'.
+            lt_prog_compiler_pic='-m68020 -resident32 -malways-restore-a4'
+        ;;
+      esac
+      ;;
 
-# Whether dlopen of statically linked programs is supported.
-dlopen_self_static=$enable_dlopen_self_static
+    beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
+      # PIC is the default for these OSes.
+      ;;
 
-# Compiler flag to prevent dynamic linking.
-link_static_flag=$lt_lt_prog_compiler_static
+    mingw* | cygwin* | pw32* | os2* | cegcc*)
+      # This hack is so that the source file can tell whether it is being
+      # built for inclusion in a dll (and should export symbols for example).
+      # Although the cygwin gcc ignores -fPIC, still need this for old-style
+      # (--disable-auto-import) libraries
+      lt_prog_compiler_pic='-DDLL_EXPORT'
+      ;;
 
-# Compiler flag to turn off builtin functions.
-no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag
+    darwin* | rhapsody*)
+      # PIC is the default on this platform
+      # Common symbols not allowed in MH_DYLIB files
+      lt_prog_compiler_pic='-fno-common'
+      ;;
 
-# Compiler flag to allow reflexive dlopens.
-export_dynamic_flag_spec=$lt_export_dynamic_flag_spec
+    hpux*)
+      # PIC is the default for 64-bit PA HP-UX, but not for 32-bit
+      # PA HP-UX.  On IA64 HP-UX, PIC is the default but the pic flag
+      # sets the default TLS model and affects inlining.
+      case $host_cpu in
+      hppa*64*)
+	# +Z the default
+	;;
+      *)
+	lt_prog_compiler_pic='-fPIC'
+	;;
+      esac
+      ;;
 
-# Compiler flag to generate shared objects directly from archives.
-whole_archive_flag_spec=$lt_whole_archive_flag_spec
+    interix[3-9]*)
+      # Interix 3.x gcc -fpic/-fPIC options generate broken code.
+      # Instead, we relocate shared libraries at runtime.
+      ;;
 
-# Compiler flag to generate thread-safe objects.
-thread_safe_flag_spec=$lt_thread_safe_flag_spec
+    msdosdjgpp*)
+      # Just because we use GCC doesn't mean we suddenly get shared libraries
+      # on systems that don't support them.
+      lt_prog_compiler_can_build_shared=no
+      enable_shared=no
+      ;;
 
-# Library versioning type.
-version_type=$version_type
+    *nto* | *qnx*)
+      # QNX uses GNU C++, but need to define -shared option too, otherwise
+      # it will coredump.
+      lt_prog_compiler_pic='-fPIC -shared'
+      ;;
 
-# Format of library name prefix.
-libname_spec=$lt_libname_spec
+    sysv4*MP*)
+      if test -d /usr/nec; then
+	lt_prog_compiler_pic=-Kconform_pic
+      fi
+      ;;
 
-# List of archive names.  First name is the real one, the rest are links.
-# The last name is the one that the linker finds with -lNAME.
-library_names_spec=$lt_library_names_spec
+    *)
+      lt_prog_compiler_pic='-fPIC'
+      ;;
+    esac
+  else
+    # PORTME Check for flag to pass linker flags through the system compiler.
+    case $host_os in
+    aix*)
+      lt_prog_compiler_wl='-Wl,'
+      if test "$host_cpu" = ia64; then
+	# AIX 5 now supports IA64 processor
+	lt_prog_compiler_static='-Bstatic'
+      else
+	lt_prog_compiler_static='-bnso -bI:/lib/syscalls.exp'
+      fi
+      ;;
 
-# The coded name of the library, if different from the real name.
-soname_spec=$lt_soname_spec
+    mingw* | cygwin* | pw32* | os2* | cegcc*)
+      # This hack is so that the source file can tell whether it is being
+      # built for inclusion in a dll (and should export symbols for example).
+      lt_prog_compiler_pic='-DDLL_EXPORT'
+      ;;
 
-# Commands used to build and install an old-style archive.
-RANLIB=$lt_RANLIB
-old_archive_cmds=$lt_old_archive_cmds
-old_postinstall_cmds=$lt_old_postinstall_cmds
-old_postuninstall_cmds=$lt_old_postuninstall_cmds
+    hpux9* | hpux10* | hpux11*)
+      lt_prog_compiler_wl='-Wl,'
+      # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
+      # not for PA HP-UX.
+      case $host_cpu in
+      hppa*64*|ia64*)
+	# +Z the default
+	;;
+      *)
+	lt_prog_compiler_pic='+Z'
+	;;
+      esac
+      # Is there a better lt_prog_compiler_static that works with the bundled CC?
+      lt_prog_compiler_static='${wl}-a ${wl}archive'
+      ;;
 
-# Create an old-style archive from a shared archive.
-old_archive_from_new_cmds=$lt_old_archive_from_new_cmds
-
-# Create a temporary old-style archive to link instead of a shared archive.
-old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds
-
-# Commands used to build and install a shared archive.
-archive_cmds=$lt_archive_cmds
-archive_expsym_cmds=$lt_archive_expsym_cmds
-postinstall_cmds=$lt_postinstall_cmds
-postuninstall_cmds=$lt_postuninstall_cmds
+    irix5* | irix6* | nonstopux*)
+      lt_prog_compiler_wl='-Wl,'
+      # PIC (with -KPIC) is the default.
+      lt_prog_compiler_static='-non_shared'
+      ;;
 
-# Commands used to build a loadable module (assumed same as above if empty)
-module_cmds=$lt_module_cmds
-module_expsym_cmds=$lt_module_expsym_cmds
+    linux* | k*bsd*-gnu)
+      case $cc_basename in
+      # old Intel for x86_64 which still supported -KPIC.
+      ecc*)
+	lt_prog_compiler_wl='-Wl,'
+	lt_prog_compiler_pic='-KPIC'
+	lt_prog_compiler_static='-static'
+        ;;
+      # icc used to be incompatible with GCC.
+      # ICC 10 doesn't accept -KPIC any more.
+      icc* | ifort*)
+	lt_prog_compiler_wl='-Wl,'
+	lt_prog_compiler_pic='-fPIC'
+	lt_prog_compiler_static='-static'
+        ;;
+      # Lahey Fortran 8.1.
+      lf95*)
+	lt_prog_compiler_wl='-Wl,'
+	lt_prog_compiler_pic='--shared'
+	lt_prog_compiler_static='--static'
+	;;
+      pgcc* | pgf77* | pgf90* | pgf95*)
+        # Portland Group compilers (*not* the Pentium gcc compiler,
+	# which looks to be a dead project)
+	lt_prog_compiler_wl='-Wl,'
+	lt_prog_compiler_pic='-fpic'
+	lt_prog_compiler_static='-Bstatic'
+        ;;
+      ccc*)
+        lt_prog_compiler_wl='-Wl,'
+        # All Alpha code is PIC.
+        lt_prog_compiler_static='-non_shared'
+        ;;
+      xl*)
+	# IBM XL C 8.0/Fortran 10.1 on PPC
+	lt_prog_compiler_wl='-Wl,'
+	lt_prog_compiler_pic='-qpic'
+	lt_prog_compiler_static='-qstaticlink'
+	;;
+      *)
+	case `$CC -V 2>&1 | sed 5q` in
+	*Sun\ C*)
+	  # Sun C 5.9
+	  lt_prog_compiler_pic='-KPIC'
+	  lt_prog_compiler_static='-Bstatic'
+	  lt_prog_compiler_wl='-Wl,'
+	  ;;
+	*Sun\ F*)
+	  # Sun Fortran 8.3 passes all unrecognized flags to the linker
+	  lt_prog_compiler_pic='-KPIC'
+	  lt_prog_compiler_static='-Bstatic'
+	  lt_prog_compiler_wl=''
+	  ;;
+	esac
+	;;
+      esac
+      ;;
 
-# Commands to strip libraries.
-old_striplib=$lt_old_striplib
-striplib=$lt_striplib
+    newsos6)
+      lt_prog_compiler_pic='-KPIC'
+      lt_prog_compiler_static='-Bstatic'
+      ;;
 
-# Dependencies to place before the objects being linked to create a
-# shared library.
-predep_objects=$lt_predep_objects
+    *nto* | *qnx*)
+      # QNX uses GNU C++, but need to define -shared option too, otherwise
+      # it will coredump.
+      lt_prog_compiler_pic='-fPIC -shared'
+      ;;
 
-# Dependencies to place after the objects being linked to create a
-# shared library.
-postdep_objects=$lt_postdep_objects
+    osf3* | osf4* | osf5*)
+      lt_prog_compiler_wl='-Wl,'
+      # All OSF/1 code is PIC.
+      lt_prog_compiler_static='-non_shared'
+      ;;
 
-# Dependencies to place before the objects being linked to create a
-# shared library.
-predeps=$lt_predeps
+    rdos*)
+      lt_prog_compiler_static='-non_shared'
+      ;;
 
-# Dependencies to place after the objects being linked to create a
-# shared library.
-postdeps=$lt_postdeps
+    solaris*)
+      lt_prog_compiler_pic='-KPIC'
+      lt_prog_compiler_static='-Bstatic'
+      case $cc_basename in
+      f77* | f90* | f95*)
+	lt_prog_compiler_wl='-Qoption ld ';;
+      *)
+	lt_prog_compiler_wl='-Wl,';;
+      esac
+      ;;
 
-# The directories searched by this compiler when creating a shared
-# library
-compiler_lib_search_dirs=$lt_compiler_lib_search_dirs
+    sunos4*)
+      lt_prog_compiler_wl='-Qoption ld '
+      lt_prog_compiler_pic='-PIC'
+      lt_prog_compiler_static='-Bstatic'
+      ;;
 
-# The library search path used internally by the compiler when linking
-# a shared library.
-compiler_lib_search_path=$lt_compiler_lib_search_path
+    sysv4 | sysv4.2uw2* | sysv4.3*)
+      lt_prog_compiler_wl='-Wl,'
+      lt_prog_compiler_pic='-KPIC'
+      lt_prog_compiler_static='-Bstatic'
+      ;;
 
-# Method to check whether dependent libraries are shared objects.
-deplibs_check_method=$lt_deplibs_check_method
+    sysv4*MP*)
+      if test -d /usr/nec ;then
+	lt_prog_compiler_pic='-Kconform_pic'
+	lt_prog_compiler_static='-Bstatic'
+      fi
+      ;;
 
-# Command to use when deplibs_check_method == file_magic.
-file_magic_cmd=$lt_file_magic_cmd
+    sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
+      lt_prog_compiler_wl='-Wl,'
+      lt_prog_compiler_pic='-KPIC'
+      lt_prog_compiler_static='-Bstatic'
+      ;;
 
-# Flag that allows shared libraries with undefined symbols to be built.
-allow_undefined_flag=$lt_allow_undefined_flag
+    unicos*)
+      lt_prog_compiler_wl='-Wl,'
+      lt_prog_compiler_can_build_shared=no
+      ;;
 
-# Flag that forces no undefined symbols.
-no_undefined_flag=$lt_no_undefined_flag
+    uts4*)
+      lt_prog_compiler_pic='-pic'
+      lt_prog_compiler_static='-Bstatic'
+      ;;
 
-# Commands used to finish a libtool library installation in a directory.
-finish_cmds=$lt_finish_cmds
+    *)
+      lt_prog_compiler_can_build_shared=no
+      ;;
+    esac
+  fi
 
-# Same as above, but a single script fragment to be evaled but not shown.
-finish_eval=$lt_finish_eval
+case $host_os in
+  # For platforms which do not support PIC, -DPIC is meaningless:
+  *djgpp*)
+    lt_prog_compiler_pic=
+    ;;
+  *)
+    lt_prog_compiler_pic="$lt_prog_compiler_pic -DPIC"
+    ;;
+esac
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_prog_compiler_pic" >&5
+$as_echo "$lt_prog_compiler_pic" >&6; }
 
-# Take the output of nm and produce a listing of raw symbols and C names.
-global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe
 
-# Transform the output of nm in a proper C declaration
-global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl
 
-# Transform the output of nm in a C name address pair
-global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
 
-# This is the shared library runtime path variable.
-runpath_var=$runpath_var
 
-# This is the shared library path variable.
-shlibpath_var=$shlibpath_var
 
-# Is shlibpath searched before the hard-coded library search path?
-shlibpath_overrides_runpath=$shlibpath_overrides_runpath
+#
+# Check to make sure the PIC flag actually works.
+#
+if test -n "$lt_prog_compiler_pic"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler PIC flag $lt_prog_compiler_pic works" >&5
+$as_echo_n "checking if $compiler PIC flag $lt_prog_compiler_pic works... " >&6; }
+if test "${lt_cv_prog_compiler_pic_works+set}" = set; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_prog_compiler_pic_works=no
+   ac_outfile=conftest.$ac_objext
+   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+   lt_compiler_flag="$lt_prog_compiler_pic -DPIC"
+   # Insert the option either (1) after the last *FLAGS variable, or
+   # (2) before a word containing "conftest.", or (3) at the end.
+   # Note that $ac_compile itself does not contain backslashes and begins
+   # with a dollar sign (not a hyphen), so the echo should work correctly.
+   # The option is referenced via a variable to avoid confusing sed.
+   lt_compile=`echo "$ac_compile" | $SED \
+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+   -e 's:$: $lt_compiler_flag:'`
+   (eval echo "\"\$as_me:9235: $lt_compile\"" >&5)
+   (eval "$lt_compile" 2>conftest.err)
+   ac_status=$?
+   cat conftest.err >&5
+   echo "$as_me:9239: \$? = $ac_status" >&5
+   if (exit $ac_status) && test -s "$ac_outfile"; then
+     # The compiler can only warn and ignore the option if not recognized
+     # So say no if there are warnings other than the usual output.
+     $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
+     $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+     if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
+       lt_cv_prog_compiler_pic_works=yes
+     fi
+   fi
+   $RM conftest*
 
-# How to hardcode a shared library path into an executable.
-hardcode_action=$hardcode_action
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic_works" >&5
+$as_echo "$lt_cv_prog_compiler_pic_works" >&6; }
 
-# Whether we should hardcode library paths into libraries.
-hardcode_into_libs=$hardcode_into_libs
+if test x"$lt_cv_prog_compiler_pic_works" = xyes; then
+    case $lt_prog_compiler_pic in
+     "" | " "*) ;;
+     *) lt_prog_compiler_pic=" $lt_prog_compiler_pic" ;;
+     esac
+else
+    lt_prog_compiler_pic=
+     lt_prog_compiler_can_build_shared=no
+fi
 
-# Flag to hardcode \$libdir into a binary during linking.
-# This must work even if \$libdir does not exist.
-hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec
+fi
 
-# If ld is used when linking, flag to hardcode \$libdir into
-# a binary during linking. This must work even if \$libdir does
-# not exist.
-hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld
 
-# Whether we need a single -rpath flag with a separated argument.
-hardcode_libdir_separator=$lt_hardcode_libdir_separator
 
-# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the
-# resulting binary.
-hardcode_direct=$hardcode_direct
 
-# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
-# resulting binary.
-hardcode_minus_L=$hardcode_minus_L
 
-# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into
-# the resulting binary.
-hardcode_shlibpath_var=$hardcode_shlibpath_var
 
-# Set to yes if building a shared library automatically hardcodes DIR into the library
-# and all subsequent libraries and executables linked against it.
-hardcode_automatic=$hardcode_automatic
+#
+# Check to make sure the static flag actually works.
+#
+wl=$lt_prog_compiler_wl eval lt_tmp_static_flag=\"$lt_prog_compiler_static\"
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler static flag $lt_tmp_static_flag works" >&5
+$as_echo_n "checking if $compiler static flag $lt_tmp_static_flag works... " >&6; }
+if test "${lt_cv_prog_compiler_static_works+set}" = set; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_prog_compiler_static_works=no
+   save_LDFLAGS="$LDFLAGS"
+   LDFLAGS="$LDFLAGS $lt_tmp_static_flag"
+   echo "$lt_simple_link_test_code" > conftest.$ac_ext
+   if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
+     # The linker can only warn and ignore the option if not recognized
+     # So say no if there are warnings
+     if test -s conftest.err; then
+       # Append any errors to the config.log.
+       cat conftest.err 1>&5
+       $ECHO "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp
+       $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+       if diff conftest.exp conftest.er2 >/dev/null; then
+         lt_cv_prog_compiler_static_works=yes
+       fi
+     else
+       lt_cv_prog_compiler_static_works=yes
+     fi
+   fi
+   $RM -r conftest*
+   LDFLAGS="$save_LDFLAGS"
 
-# Variables whose values should be saved in libtool wrapper scripts and
-# restored at relink time.
-variables_saved_for_relink="$variables_saved_for_relink"
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_static_works" >&5
+$as_echo "$lt_cv_prog_compiler_static_works" >&6; }
 
-# Whether libtool must link a program against all its dependency libraries.
-link_all_deplibs=$link_all_deplibs
+if test x"$lt_cv_prog_compiler_static_works" = xyes; then
+    :
+else
+    lt_prog_compiler_static=
+fi
 
-# Compile-time system search path for libraries
-sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
 
-# Run-time system search path for libraries
-sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
 
-# Fix the shell variable \$srcfile for the compiler.
-fix_srcfile_path=$lt_fix_srcfile_path
 
-# Set to yes if exported symbols are required.
-always_export_symbols=$always_export_symbols
 
-# The commands to list exported symbols.
-export_symbols_cmds=$lt_export_symbols_cmds
 
-# The commands to extract the exported symbol list from a shared archive.
-extract_expsyms_cmds=$lt_extract_expsyms_cmds
 
-# Symbols that should not be listed in the preloaded symbols.
-exclude_expsyms=$lt_exclude_expsyms
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5
+$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; }
+if test "${lt_cv_prog_compiler_c_o+set}" = set; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_prog_compiler_c_o=no
+   $RM -r conftest 2>/dev/null
+   mkdir conftest
+   cd conftest
+   mkdir out
+   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
 
-# Symbols that must always be exported.
-include_expsyms=$lt_include_expsyms
+   lt_compiler_flag="-o out/conftest2.$ac_objext"
+   # Insert the option either (1) after the last *FLAGS variable, or
+   # (2) before a word containing "conftest.", or (3) at the end.
+   # Note that $ac_compile itself does not contain backslashes and begins
+   # with a dollar sign (not a hyphen), so the echo should work correctly.
+   lt_compile=`echo "$ac_compile" | $SED \
+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+   -e 's:$: $lt_compiler_flag:'`
+   (eval echo "\"\$as_me:9340: $lt_compile\"" >&5)
+   (eval "$lt_compile" 2>out/conftest.err)
+   ac_status=$?
+   cat out/conftest.err >&5
+   echo "$as_me:9344: \$? = $ac_status" >&5
+   if (exit $ac_status) && test -s out/conftest2.$ac_objext
+   then
+     # The compiler can only warn and ignore the option if not recognized
+     # So say no if there are warnings
+     $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
+     $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
+     if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
+       lt_cv_prog_compiler_c_o=yes
+     fi
+   fi
+   chmod u+w . 2>&5
+   $RM conftest*
+   # SGI C++ compiler will create directory out/ii_files/ for
+   # template instantiation
+   test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files
+   $RM out/* && rmdir out
+   cd ..
+   $RM -r conftest
+   $RM conftest*
 
-# ### END LIBTOOL CONFIG
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o" >&5
+$as_echo "$lt_cv_prog_compiler_c_o" >&6; }
 
-__EOF__
 
 
-  case $host_os in
-  aix3*)
-    cat <<\EOF >> "$cfgfile"
 
-# AIX sometimes has problems with the GCC collect2 program.  For some
-# reason, if we set the COLLECT_NAMES environment variable, the problems
-# vanish in a puff of smoke.
-if test "X${COLLECT_NAMES+set}" != Xset; then
-  COLLECT_NAMES=
-  export COLLECT_NAMES
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5
+$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; }
+if test "${lt_cv_prog_compiler_c_o+set}" = set; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_prog_compiler_c_o=no
+   $RM -r conftest 2>/dev/null
+   mkdir conftest
+   cd conftest
+   mkdir out
+   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+   lt_compiler_flag="-o out/conftest2.$ac_objext"
+   # Insert the option either (1) after the last *FLAGS variable, or
+   # (2) before a word containing "conftest.", or (3) at the end.
+   # Note that $ac_compile itself does not contain backslashes and begins
+   # with a dollar sign (not a hyphen), so the echo should work correctly.
+   lt_compile=`echo "$ac_compile" | $SED \
+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+   -e 's:$: $lt_compiler_flag:'`
+   (eval echo "\"\$as_me:9395: $lt_compile\"" >&5)
+   (eval "$lt_compile" 2>out/conftest.err)
+   ac_status=$?
+   cat out/conftest.err >&5
+   echo "$as_me:9399: \$? = $ac_status" >&5
+   if (exit $ac_status) && test -s out/conftest2.$ac_objext
+   then
+     # The compiler can only warn and ignore the option if not recognized
+     # So say no if there are warnings
+     $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
+     $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
+     if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
+       lt_cv_prog_compiler_c_o=yes
+     fi
+   fi
+   chmod u+w . 2>&5
+   $RM conftest*
+   # SGI C++ compiler will create directory out/ii_files/ for
+   # template instantiation
+   test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files
+   $RM out/* && rmdir out
+   cd ..
+   $RM -r conftest
+   $RM conftest*
+
 fi
-EOF
-    ;;
-  esac
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o" >&5
+$as_echo "$lt_cv_prog_compiler_c_o" >&6; }
 
-  # We use sed instead of cat because bash on DJGPP gets confused if
-  # if finds mixed CR/LF and LF-only lines.  Since sed operates in
-  # text mode, it properly converts lines to CR/LF.  This bash problem
-  # is reportedly fixed, but why not run on old versions too?
-  sed '$q' "$ltmain" >> "$cfgfile" || (rm -f "$cfgfile"; exit 1)
 
-  mv -f "$cfgfile" "$ofile" || \
-    (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")
-  chmod +x "$ofile"
 
-else
-  # If there is no Makefile yet, we rely on a make rule to execute
-  # `config.status --recheck' to rerun these tests and create the
-  # libtool script then.
-  ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'`
-  if test -f "$ltmain_in"; then
-    test -f Makefile && make "$ltmain"
+
+hard_links="nottested"
+if test "$lt_cv_prog_compiler_c_o" = no && test "$need_locks" != no; then
+  # do not overwrite the value of need_locks provided by the user
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if we can lock with hard links" >&5
+$as_echo_n "checking if we can lock with hard links... " >&6; }
+  hard_links=yes
+  $RM conftest*
+  ln conftest.a conftest.b 2>/dev/null && hard_links=no
+  touch conftest.a
+  ln conftest.a conftest.b 2>&5 || hard_links=no
+  ln conftest.a conftest.b 2>/dev/null && hard_links=no
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $hard_links" >&5
+$as_echo "$hard_links" >&6; }
+  if test "$hard_links" = no; then
+    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5
+$as_echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;}
+    need_locks=warn
   fi
+else
+  need_locks=no
 fi
 
 
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
 
-CC="$lt_save_CC"
 
 
-# Check whether --with-tags was given.
-if test "${with_tags+set}" = set; then
-  withval=$with_tags; tagnames="$withval"
-fi
 
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $compiler linker ($LD) supports shared libraries" >&5
+$as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; }
 
-if test -f "$ltmain" && test -n "$tagnames"; then
-  if test ! -f "${ofile}"; then
-    { $as_echo "$as_me:$LINENO: WARNING: output file \`$ofile' does not exist" >&5
-$as_echo "$as_me: WARNING: output file \`$ofile' does not exist" >&2;}
-  fi
+  runpath_var=
+  allow_undefined_flag=
+  always_export_symbols=no
+  archive_cmds=
+  archive_expsym_cmds=
+  compiler_needs_object=no
+  enable_shared_with_static_runtimes=no
+  export_dynamic_flag_spec=
+  export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+  hardcode_automatic=no
+  hardcode_direct=no
+  hardcode_direct_absolute=no
+  hardcode_libdir_flag_spec=
+  hardcode_libdir_flag_spec_ld=
+  hardcode_libdir_separator=
+  hardcode_minus_L=no
+  hardcode_shlibpath_var=unsupported
+  inherit_rpath=no
+  link_all_deplibs=unknown
+  module_cmds=
+  module_expsym_cmds=
+  old_archive_from_new_cmds=
+  old_archive_from_expsyms_cmds=
+  thread_safe_flag_spec=
+  whole_archive_flag_spec=
+  # include_expsyms should be a list of space-separated symbols to be *always*
+  # included in the symbol list
+  include_expsyms=
+  # exclude_expsyms can be an extended regexp of symbols to exclude
+  # it will be wrapped by ` (' and `)$', so one must not match beginning or
+  # end of line.  Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
+  # as well as any symbol that contains `d'.
+  exclude_expsyms='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'
+  # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
+  # platforms (ab)use it in PIC code, but their linkers get confused if
+  # the symbol is explicitly referenced.  Since portable code cannot
+  # rely on this symbol name, it's probably fine to never include it in
+  # preloaded symbol tables.
+  # Exclude shared library initialization/finalization symbols.
+  extract_expsyms_cmds=
 
-  if test -z "$LTCC"; then
-    eval "`$SHELL ${ofile} --config | grep '^LTCC='`"
-    if test -z "$LTCC"; then
-      { $as_echo "$as_me:$LINENO: WARNING: output file \`$ofile' does not look like a libtool script" >&5
-$as_echo "$as_me: WARNING: output file \`$ofile' does not look like a libtool script" >&2;}
-    else
-      { $as_echo "$as_me:$LINENO: WARNING: using \`LTCC=$LTCC', extracted from \`$ofile'" >&5
-$as_echo "$as_me: WARNING: using \`LTCC=$LTCC', extracted from \`$ofile'" >&2;}
+  case $host_os in
+  cygwin* | mingw* | pw32* | cegcc*)
+    # FIXME: the MSVC++ port hasn't been tested in a loooong time
+    # When not using gcc, we currently assume that we are using
+    # Microsoft Visual C++.
+    if test "$GCC" != yes; then
+      with_gnu_ld=no
     fi
-  fi
-  if test -z "$LTCFLAGS"; then
-    eval "`$SHELL ${ofile} --config | grep '^LTCFLAGS='`"
-  fi
+    ;;
+  interix*)
+    # we just hope/assume this is gcc and not c89 (= MSVC++)
+    with_gnu_ld=yes
+    ;;
+  openbsd*)
+    with_gnu_ld=no
+    ;;
+  linux* | k*bsd*-gnu)
+    link_all_deplibs=no
+    ;;
+  esac
 
-  # Extract list of available tagged configurations in $ofile.
-  # Note that this assumes the entire list is on one line.
-  available_tags=`grep "^available_tags=" "${ofile}" | $SED -e 's/available_tags=\(.*$\)/\1/' -e 's/\"//g'`
+  ld_shlibs=yes
+  if test "$with_gnu_ld" = yes; then
+    # If archive_cmds runs LD, not CC, wlarc should be empty
+    wlarc='${wl}'
 
-  lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
-  for tagname in $tagnames; do
-    IFS="$lt_save_ifs"
-    # Check whether tagname contains only valid characters
-    case `$echo "X$tagname" | $Xsed -e 's:[-_ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz1234567890,/]::g'` in
-    "") ;;
-    *)  { { $as_echo "$as_me:$LINENO: error: invalid tag name: $tagname" >&5
-$as_echo "$as_me: error: invalid tag name: $tagname" >&2;}
-   { (exit 1); exit 1; }; }
-	;;
+    # Set some defaults for GNU ld with shared library support. These
+    # are reset later if shared libraries are not supported. Putting them
+    # here allows them to be overridden if necessary.
+    runpath_var=LD_RUN_PATH
+    hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+    export_dynamic_flag_spec='${wl}--export-dynamic'
+    # ancient GNU ld didn't support --whole-archive et. al.
+    if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then
+      whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+    else
+      whole_archive_flag_spec=
+    fi
+    supports_anon_versioning=no
+    case `$LD -v 2>&1` in
+      *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11
+      *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
+      *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
+      *\ 2.11.*) ;; # other 2.11 versions
+      *) supports_anon_versioning=yes ;;
     esac
 
-    if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "${ofile}" > /dev/null
-    then
-      { { $as_echo "$as_me:$LINENO: error: tag name \"$tagname\" already exists" >&5
-$as_echo "$as_me: error: tag name \"$tagname\" already exists" >&2;}
-   { (exit 1); exit 1; }; }
-    fi
+    # See if GNU ld supports shared libraries.
+    case $host_os in
+    aix[3-9]*)
+      # On AIX/PPC, the GNU linker is very broken
+      if test "$host_cpu" != ia64; then
+	ld_shlibs=no
+	cat <<_LT_EOF 1>&2
 
-    # Update the list of available tags.
-    if test -n "$tagname"; then
-      echo appending configuration tag \"$tagname\" to $ofile
-
-      case $tagname in
-      CXX)
-	if test -n "$CXX" && ( test "X$CXX" != "Xno" &&
-	    ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) ||
-	    (test "X$CXX" != "Xg++"))) ; then
-	  ac_ext=cpp
-ac_cpp='$CXXCPP $CPPFLAGS'
-ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
+*** Warning: the GNU linker, at least up to release 2.9.1, is reported
+*** to be unable to reliably create shared libraries on AIX.
+*** Therefore, libtool is disabling shared libraries support.  If you
+*** really care for shared libraries, you may want to modify your PATH
+*** so that a non-GNU linker is found, and then restart.
 
+_LT_EOF
+      fi
+      ;;
 
+    amigaos*)
+      case $host_cpu in
+      powerpc)
+            # see comment about AmigaOS4 .so support
+            archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+            archive_expsym_cmds=''
+        ;;
+      m68k)
+            archive_cmds='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
+            hardcode_libdir_flag_spec='-L$libdir'
+            hardcode_minus_L=yes
+        ;;
+      esac
+      ;;
 
+    beos*)
+      if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+	allow_undefined_flag=unsupported
+	# Joseph Beckenbach <jrb3@best.com> says some releases of gcc
+	# support --undefined.  This deserves some investigation.  FIXME
+	archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+      else
+	ld_shlibs=no
+      fi
+      ;;
 
-archive_cmds_need_lc_CXX=no
-allow_undefined_flag_CXX=
-always_export_symbols_CXX=no
-archive_expsym_cmds_CXX=
-export_dynamic_flag_spec_CXX=
-hardcode_direct_CXX=no
-hardcode_libdir_flag_spec_CXX=
-hardcode_libdir_flag_spec_ld_CXX=
-hardcode_libdir_separator_CXX=
-hardcode_minus_L_CXX=no
-hardcode_shlibpath_var_CXX=unsupported
-hardcode_automatic_CXX=no
-module_cmds_CXX=
-module_expsym_cmds_CXX=
-link_all_deplibs_CXX=unknown
-old_archive_cmds_CXX=$old_archive_cmds
-no_undefined_flag_CXX=
-whole_archive_flag_spec_CXX=
-enable_shared_with_static_runtimes_CXX=no
+    cygwin* | mingw* | pw32* | cegcc*)
+      # _LT_TAGVAR(hardcode_libdir_flag_spec, ) is actually meaningless,
+      # as there is no search path for DLLs.
+      hardcode_libdir_flag_spec='-L$libdir'
+      allow_undefined_flag=unsupported
+      always_export_symbols=no
+      enable_shared_with_static_runtimes=yes
+      export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/'\'' | $SED -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols'
 
-# Dependencies to place before and after the object being linked:
-predep_objects_CXX=
-postdep_objects_CXX=
-predeps_CXX=
-postdeps_CXX=
-compiler_lib_search_path_CXX=
-compiler_lib_search_dirs_CXX=
+      if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
+        archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+	# If the export-symbols file already is a .def file (1st line
+	# is EXPORTS), use it as is; otherwise, prepend...
+	archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
+	  cp $export_symbols $output_objdir/$soname.def;
+	else
+	  echo EXPORTS > $output_objdir/$soname.def;
+	  cat $export_symbols >> $output_objdir/$soname.def;
+	fi~
+	$CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+      else
+	ld_shlibs=no
+      fi
+      ;;
 
-# Source file extension for C++ test sources.
-ac_ext=cpp
+    interix[3-9]*)
+      hardcode_direct=no
+      hardcode_shlibpath_var=no
+      hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
+      export_dynamic_flag_spec='${wl}-E'
+      # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
+      # Instead, shared libraries are loaded at an image base (0x10000000 by
+      # default) and relocated if they conflict, which is a slow very memory
+      # consuming and fragmenting process.  To avoid this, we pick a random,
+      # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
+      # time.  Moving up from 0x10000000 also allows more sbrk(2) space.
+      archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+      archive_expsym_cmds='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+      ;;
 
-# Object file extension for compiled C++ test sources.
-objext=o
-objext_CXX=$objext
+    gnu* | linux* | tpf* | k*bsd*-gnu)
+      tmp_diet=no
+      if test "$host_os" = linux-dietlibc; then
+	case $cc_basename in
+	  diet\ *) tmp_diet=yes;;	# linux-dietlibc with static linking (!diet-dyn)
+	esac
+      fi
+      if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \
+	 && test "$tmp_diet" = no
+      then
+	tmp_addflag=
+	tmp_sharedflag='-shared'
+	case $cc_basename,$host_cpu in
+        pgcc*)				# Portland Group C compiler
+	  whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
+	  tmp_addflag=' $pic_flag'
+	  ;;
+	pgf77* | pgf90* | pgf95*)	# Portland Group f77 and f90 compilers
+	  whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
+	  tmp_addflag=' $pic_flag -Mnomain' ;;
+	ecc*,ia64* | icc*,ia64*)	# Intel C compiler on ia64
+	  tmp_addflag=' -i_dynamic' ;;
+	efc*,ia64* | ifort*,ia64*)	# Intel Fortran compiler on ia64
+	  tmp_addflag=' -i_dynamic -nofor_main' ;;
+	ifc* | ifort*)			# Intel Fortran compiler
+	  tmp_addflag=' -nofor_main' ;;
+	lf95*)				# Lahey Fortran 8.1
+	  whole_archive_flag_spec=
+	  tmp_sharedflag='--shared' ;;
+	xl[cC]*)			# IBM XL C 8.0 on PPC (deal with xlf below)
+	  tmp_sharedflag='-qmkshrobj'
+	  tmp_addflag= ;;
+	esac
+	case `$CC -V 2>&1 | sed 5q` in
+	*Sun\ C*)			# Sun C 5.9
+	  whole_archive_flag_spec='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
+	  compiler_needs_object=yes
+	  tmp_sharedflag='-G' ;;
+	*Sun\ F*)			# Sun Fortran 8.3
+	  tmp_sharedflag='-G' ;;
+	esac
+	archive_cmds='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
 
-# Code to be used in simple compile tests
-lt_simple_compile_test_code="int some_variable = 0;"
+        if test "x$supports_anon_versioning" = xyes; then
+          archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~
+	    cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+	    echo "local: *; };" >> $output_objdir/$libname.ver~
+	    $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
+        fi
 
-# Code to be used in simple link tests
-lt_simple_link_test_code='int main(int, char *[]) { return(0); }'
+	case $cc_basename in
+	xlf*)
+	  # IBM XL Fortran 10.1 on PPC cannot create shared libs itself
+	  whole_archive_flag_spec='--whole-archive$convenience --no-whole-archive'
+	  hardcode_libdir_flag_spec=
+	  hardcode_libdir_flag_spec_ld='-rpath $libdir'
+	  archive_cmds='$LD -shared $libobjs $deplibs $compiler_flags -soname $soname -o $lib'
+	  if test "x$supports_anon_versioning" = xyes; then
+	    archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~
+	      cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+	      echo "local: *; };" >> $output_objdir/$libname.ver~
+	      $LD -shared $libobjs $deplibs $compiler_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib'
+	  fi
+	  ;;
+	esac
+      else
+        ld_shlibs=no
+      fi
+      ;;
 
-# ltmain only uses $CC for tagged configurations so make sure $CC is set.
+    netbsd* | netbsdelf*-gnu)
+      if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+	archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
+	wlarc=
+      else
+	archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+      fi
+      ;;
 
-# If no C compiler was specified, use CC.
-LTCC=${LTCC-"$CC"}
+    solaris*)
+      if $LD -v 2>&1 | $GREP 'BFD 2\.8' > /dev/null; then
+	ld_shlibs=no
+	cat <<_LT_EOF 1>&2
 
-# If no C compiler flags were specified, use CFLAGS.
-LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
+*** Warning: The releases 2.8.* of the GNU linker cannot reliably
+*** create shared libraries on Solaris systems.  Therefore, libtool
+*** is disabling shared libraries support.  We urge you to upgrade GNU
+*** binutils to release 2.9.1 or newer.  Another option is to modify
+*** your PATH or compiler configuration so that the native linker is
+*** used, and then restart.
 
-# Allow CC to be a program name with arguments.
-compiler=$CC
+_LT_EOF
+      elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+	archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+      else
+	ld_shlibs=no
+      fi
+      ;;
 
+    sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
+      case `$LD -v 2>&1` in
+        *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*)
+	ld_shlibs=no
+	cat <<_LT_EOF 1>&2
 
-# save warnings/boilerplate of simple test code
-ac_outfile=conftest.$ac_objext
-echo "$lt_simple_compile_test_code" >conftest.$ac_ext
-eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
-_lt_compiler_boilerplate=`cat conftest.err`
-$rm conftest*
+*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not
+*** reliably create shared libraries on SCO systems.  Therefore, libtool
+*** is disabling shared libraries support.  We urge you to upgrade GNU
+*** binutils to release 2.16.91.0.3 or newer.  Another option is to modify
+*** your PATH or compiler configuration so that the native linker is
+*** used, and then restart.
 
-ac_outfile=conftest.$ac_objext
-echo "$lt_simple_link_test_code" >conftest.$ac_ext
-eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
-_lt_linker_boilerplate=`cat conftest.err`
-$rm -r conftest*
+_LT_EOF
+	;;
+	*)
+	  # For security reasons, it is highly recommended that you always
+	  # use absolute paths for naming shared libraries, and exclude the
+	  # DT_RUNPATH tag from executables and libraries.  But doing so
+	  # requires that you compile everything twice, which is a pain.
+	  if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+	    hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+	    archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	    archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+	  else
+	    ld_shlibs=no
+	  fi
+	;;
+      esac
+      ;;
 
+    sunos4*)
+      archive_cmds='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+      wlarc=
+      hardcode_direct=yes
+      hardcode_shlibpath_var=no
+      ;;
 
-# Allow CC to be a program name with arguments.
-lt_save_CC=$CC
-lt_save_LD=$LD
-lt_save_GCC=$GCC
-GCC=$GXX
-lt_save_with_gnu_ld=$with_gnu_ld
-lt_save_path_LD=$lt_cv_path_LD
-if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then
-  lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx
-else
-  $as_unset lt_cv_prog_gnu_ld
-fi
-if test -n "${lt_cv_path_LDCXX+set}"; then
-  lt_cv_path_LD=$lt_cv_path_LDCXX
-else
-  $as_unset lt_cv_path_LD
-fi
-test -z "${LDCXX+set}" || LD=$LDCXX
-CC=${CXX-"c++"}
-compiler=$CC
-compiler_CXX=$CC
-for cc_temp in $compiler""; do
-  case $cc_temp in
-    compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
-    distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
-    \-*) ;;
-    *) break;;
-  esac
-done
-cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
+    *)
+      if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+	archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+      else
+	ld_shlibs=no
+      fi
+      ;;
+    esac
 
+    if test "$ld_shlibs" = no; then
+      runpath_var=
+      hardcode_libdir_flag_spec=
+      export_dynamic_flag_spec=
+      whole_archive_flag_spec=
+    fi
+  else
+    # PORTME fill in a description of your system's linker (not GNU ld)
+    case $host_os in
+    aix3*)
+      allow_undefined_flag=unsupported
+      always_export_symbols=yes
+      archive_expsym_cmds='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
+      # Note: this linker hardcodes the directories in LIBPATH if there
+      # are no directories specified by -L.
+      hardcode_minus_L=yes
+      if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then
+	# Neither direct hardcoding nor static linking is supported with a
+	# broken collect2.
+	hardcode_direct=unsupported
+      fi
+      ;;
 
-# We don't want -fno-exception wen compiling C++ code, so set the
-# no_builtin_flag separately
-if test "$GXX" = yes; then
-  lt_prog_compiler_no_builtin_flag_CXX=' -fno-builtin'
-else
-  lt_prog_compiler_no_builtin_flag_CXX=
-fi
+    aix[4-9]*)
+      if test "$host_cpu" = ia64; then
+	# On IA64, the linker does run time linking by default, so we don't
+	# have to do anything special.
+	aix_use_runtimelinking=no
+	exp_sym_flag='-Bexport'
+	no_entry_flag=""
+      else
+	# If we're using GNU nm, then we don't want the "-C" option.
+	# -C means demangle to AIX nm, but means don't demangle with GNU nm
+	if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
+	  export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+	else
+	  export_symbols_cmds='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+	fi
+	aix_use_runtimelinking=no
 
-if test "$GXX" = yes; then
-  # Set up default GNU C++ configuration
+	# Test if we are trying to use run time linking or normal
+	# AIX style linking. If -brtl is somewhere in LDFLAGS, we
+	# need to do runtime linking.
+	case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*)
+	  for ld_flag in $LDFLAGS; do
+	  if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
+	    aix_use_runtimelinking=yes
+	    break
+	  fi
+	  done
+	  ;;
+	esac
 
+	exp_sym_flag='-bexport'
+	no_entry_flag='-bnoentry'
+      fi
 
-# Check whether --with-gnu-ld was given.
-if test "${with_gnu_ld+set}" = set; then
-  withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes
-else
-  with_gnu_ld=no
-fi
+      # When large executables or shared objects are built, AIX ld can
+      # have problems creating the table of contents.  If linking a library
+      # or program results in "error TOC overflow" add -mminimal-toc to
+      # CXXFLAGS/CFLAGS for g++/gcc.  In the cases where that is not
+      # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
 
-ac_prog=ld
-if test "$GCC" = yes; then
-  # Check if gcc -print-prog-name=ld gives a path.
-  { $as_echo "$as_me:$LINENO: checking for ld used by $CC" >&5
-$as_echo_n "checking for ld used by $CC... " >&6; }
-  case $host in
-  *-*-mingw*)
-    # gcc leaves a trailing carriage return which upsets mingw
-    ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
-  *)
-    ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
-  esac
-  case $ac_prog in
-    # Accept absolute paths.
-    [\\/]* | ?:[\\/]*)
-      re_direlt='/[^/][^/]*/\.\./'
-      # Canonicalize the pathname of ld
-      ac_prog=`echo $ac_prog| $SED 's%\\\\%/%g'`
-      while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
-	ac_prog=`echo $ac_prog| $SED "s%$re_direlt%/%"`
-      done
-      test -z "$LD" && LD="$ac_prog"
-      ;;
-  "")
-    # If it fails, then pretend we aren't using GCC.
-    ac_prog=ld
-    ;;
-  *)
-    # If it is relative, then search for the first ld in PATH.
-    with_gnu_ld=unknown
-    ;;
-  esac
-elif test "$with_gnu_ld" = yes; then
-  { $as_echo "$as_me:$LINENO: checking for GNU ld" >&5
-$as_echo_n "checking for GNU ld... " >&6; }
-else
-  { $as_echo "$as_me:$LINENO: checking for non-GNU ld" >&5
-$as_echo_n "checking for non-GNU ld... " >&6; }
-fi
-if test "${lt_cv_path_LD+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
-  if test -z "$LD"; then
-  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-  for ac_dir in $PATH; do
-    IFS="$lt_save_ifs"
-    test -z "$ac_dir" && ac_dir=.
-    if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
-      lt_cv_path_LD="$ac_dir/$ac_prog"
-      # Check to see if the program is GNU ld.  I'd rather use --version,
-      # but apparently some variants of GNU ld only accept -v.
-      # Break only if it was the GNU/non-GNU ld that we prefer.
-      case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
-      *GNU* | *'with BFD'*)
-	test "$with_gnu_ld" != no && break
-	;;
-      *)
-	test "$with_gnu_ld" != yes && break
-	;;
-      esac
-    fi
-  done
-  IFS="$lt_save_ifs"
-else
-  lt_cv_path_LD="$LD" # Let the user override the test with a path.
-fi
-fi
-
-LD="$lt_cv_path_LD"
-if test -n "$LD"; then
-  { $as_echo "$as_me:$LINENO: result: $LD" >&5
-$as_echo "$LD" >&6; }
-else
-  { $as_echo "$as_me:$LINENO: result: no" >&5
-$as_echo "no" >&6; }
-fi
-test -z "$LD" && { { $as_echo "$as_me:$LINENO: error: no acceptable ld found in \$PATH" >&5
-$as_echo "$as_me: error: no acceptable ld found in \$PATH" >&2;}
-   { (exit 1); exit 1; }; }
-{ $as_echo "$as_me:$LINENO: checking if the linker ($LD) is GNU ld" >&5
-$as_echo_n "checking if the linker ($LD) is GNU ld... " >&6; }
-if test "${lt_cv_prog_gnu_ld+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
-  # I'd rather use --version here, but apparently some GNU lds only accept -v.
-case `$LD -v 2>&1 </dev/null` in
-*GNU* | *'with BFD'*)
-  lt_cv_prog_gnu_ld=yes
-  ;;
-*)
-  lt_cv_prog_gnu_ld=no
-  ;;
-esac
-fi
-{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_gnu_ld" >&5
-$as_echo "$lt_cv_prog_gnu_ld" >&6; }
-with_gnu_ld=$lt_cv_prog_gnu_ld
-
-
-
-  # Check if GNU C++ uses GNU ld as the underlying linker, since the
-  # archiving commands below assume that GNU ld is being used.
-  if test "$with_gnu_ld" = yes; then
-    archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
-    archive_expsym_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-
-    hardcode_libdir_flag_spec_CXX='${wl}--rpath ${wl}$libdir'
-    export_dynamic_flag_spec_CXX='${wl}--export-dynamic'
-
-    # If archive_cmds runs LD, not CC, wlarc should be empty
-    # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to
-    #     investigate it a little bit more. (MM)
-    wlarc='${wl}'
-
-    # ancient GNU ld didn't support --whole-archive et. al.
-    if eval "`$CC -print-prog-name=ld` --help 2>&1" | \
-	grep 'no-whole-archive' > /dev/null; then
-      whole_archive_flag_spec_CXX="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
-    else
-      whole_archive_flag_spec_CXX=
-    fi
-  else
-    with_gnu_ld=no
-    wlarc=
-
-    # A generic and very simple default shared library creation
-    # command for GNU C++ for the case where it uses the native
-    # linker, instead of GNU ld.  If possible, this setting should
-    # overridden to take advantage of the native linker features on
-    # the platform it is being used on.
-    archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
-  fi
-
-  # Commands to make compiler produce verbose output that lists
-  # what "hidden" libraries, object files and flags are used when
-  # linking a shared library.
-  output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"'
-
-else
-  GXX=no
-  with_gnu_ld=no
-  wlarc=
-fi
-
-# PORTME: fill in a description of your system's C++ link characteristics
-{ $as_echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5
-$as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; }
-ld_shlibs_CXX=yes
-case $host_os in
-  aix3*)
-    # FIXME: insert proper C++ library support
-    ld_shlibs_CXX=no
-    ;;
-  aix[4-9]*)
-    if test "$host_cpu" = ia64; then
-      # On IA64, the linker does run time linking by default, so we don't
-      # have to do anything special.
-      aix_use_runtimelinking=no
-      exp_sym_flag='-Bexport'
-      no_entry_flag=""
-    else
-      aix_use_runtimelinking=no
-
-      # Test if we are trying to use run time linking or normal
-      # AIX style linking. If -brtl is somewhere in LDFLAGS, we
-      # need to do runtime linking.
-      case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*)
-	for ld_flag in $LDFLAGS; do
-	  case $ld_flag in
-	  *-brtl*)
-	    aix_use_runtimelinking=yes
-	    break
-	    ;;
-	  esac
-	done
-	;;
-      esac
-
-      exp_sym_flag='-bexport'
-      no_entry_flag='-bnoentry'
-    fi
-
-    # When large executables or shared objects are built, AIX ld can
-    # have problems creating the table of contents.  If linking a library
-    # or program results in "error TOC overflow" add -mminimal-toc to
-    # CXXFLAGS/CFLAGS for g++/gcc.  In the cases where that is not
-    # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
-
-    archive_cmds_CXX=''
-    hardcode_direct_CXX=yes
-    hardcode_libdir_separator_CXX=':'
-    link_all_deplibs_CXX=yes
+      archive_cmds=''
+      hardcode_direct=yes
+      hardcode_direct_absolute=yes
+      hardcode_libdir_separator=':'
+      link_all_deplibs=yes
+      file_list_spec='${wl}-f,'
 
-    if test "$GXX" = yes; then
-      case $host_os in aix4.[012]|aix4.[012].*)
-      # We only want to do this on AIX 4.2 and lower, the check
-      # below for broken collect2 doesn't work under 4.3+
-	collect2name=`${CC} -print-prog-name=collect2`
-	if test -f "$collect2name" && \
-	   strings "$collect2name" | grep resolve_lib_name >/dev/null
-	then
+      if test "$GCC" = yes; then
+	case $host_os in aix4.[012]|aix4.[012].*)
+	# We only want to do this on AIX 4.2 and lower, the check
+	# below for broken collect2 doesn't work under 4.3+
+	  collect2name=`${CC} -print-prog-name=collect2`
+	  if test -f "$collect2name" &&
+	   strings "$collect2name" | $GREP resolve_lib_name >/dev/null
+	  then
 	  # We have reworked collect2
 	  :
-	else
+	  else
 	  # We have old collect2
-	  hardcode_direct_CXX=unsupported
+	  hardcode_direct=unsupported
 	  # It fails to find uninstalled libraries when the uninstalled
 	  # path is not listed in the libpath.  Setting hardcode_minus_L
 	  # to unsupported forces relinking
-	  hardcode_minus_L_CXX=yes
-	  hardcode_libdir_flag_spec_CXX='-L$libdir'
-	  hardcode_libdir_separator_CXX=
+	  hardcode_minus_L=yes
+	  hardcode_libdir_flag_spec='-L$libdir'
+	  hardcode_libdir_separator=
+	  fi
+	  ;;
+	esac
+	shared_flag='-shared'
+	if test "$aix_use_runtimelinking" = yes; then
+	  shared_flag="$shared_flag "'${wl}-G'
 	fi
-	;;
-      esac
-      shared_flag='-shared'
-      if test "$aix_use_runtimelinking" = yes; then
-	shared_flag="$shared_flag "'${wl}-G'
-      fi
-    else
-      # not using gcc
-      if test "$host_cpu" = ia64; then
+	link_all_deplibs=no
+      else
+	# not using gcc
+	if test "$host_cpu" = ia64; then
 	# VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
 	# chokes on -Wl,-G. The following line is correct:
-	shared_flag='-G'
-      else
-	if test "$aix_use_runtimelinking" = yes; then
-	  shared_flag='${wl}-G'
+	  shared_flag='-G'
 	else
-	  shared_flag='${wl}-bM:SRE'
+	  if test "$aix_use_runtimelinking" = yes; then
+	    shared_flag='${wl}-G'
+	  else
+	    shared_flag='${wl}-bM:SRE'
+	  fi
 	fi
       fi
-    fi
 
-    # It seems that -bexpall does not export symbols beginning with
-    # underscore (_), so it is better to generate a list of symbols to export.
-    always_export_symbols_CXX=yes
-    if test "$aix_use_runtimelinking" = yes; then
-      # Warning - without using the other runtime loading flags (-brtl),
-      # -berok will link without error, but may produce a broken library.
-      allow_undefined_flag_CXX='-berok'
-      # Determine the default libpath from the value encoded in an empty executable.
-      cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+      export_dynamic_flag_spec='${wl}-bexpall'
+      # It seems that -bexpall does not export symbols beginning with
+      # underscore (_), so it is better to generate a list of symbols to export.
+      always_export_symbols=yes
+      if test "$aix_use_runtimelinking" = yes; then
+	# Warning - without using the other runtime loading flags (-brtl),
+	# -berok will link without error, but may produce a broken library.
+	allow_undefined_flag='-berok'
+        # Determine the default libpath from the value encoded in an
+        # empty executable.
+        cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 
 int
@@ -12233,27 +9908,7 @@
   return 0;
 }
 _ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_link") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_cxx_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest$ac_exeext && {
-	 test "$cross_compiling" = yes ||
-	 $as_test_x conftest$ac_exeext
-       }; then
+if ac_fn_c_try_link "$LINENO"; then :
 
 lt_aix_libpath_sed='
     /Import File Strings/,/^$/ {
@@ -12267,33 +9922,22 @@
 if test -z "$aix_libpath"; then
   aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
 fi
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-
 fi
-
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-      conftest$ac_exeext conftest.$ac_ext
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
 if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
 
-      hardcode_libdir_flag_spec_CXX='${wl}-blibpath:$libdir:'"$aix_libpath"
-
-      archive_expsym_cmds_CXX="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
-     else
-      if test "$host_cpu" = ia64; then
-	hardcode_libdir_flag_spec_CXX='${wl}-R $libdir:/usr/lib:/lib'
-	allow_undefined_flag_CXX="-z nodefs"
-	archive_expsym_cmds_CXX="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
+        hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
+        archive_expsym_cmds='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then $ECHO "X${wl}${allow_undefined_flag}" | $Xsed; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
       else
-	# Determine the default libpath from the value encoded in an empty executable.
-	cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+	if test "$host_cpu" = ia64; then
+	  hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib'
+	  allow_undefined_flag="-z nodefs"
+	  archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
+	else
+	 # Determine the default libpath from the value encoded in an
+	 # empty executable.
+	 cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 
 int
@@ -12304,27 +9948,7 @@
   return 0;
 }
 _ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_link") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_cxx_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest$ac_exeext && {
-	 test "$cross_compiling" = yes ||
-	 $as_test_x conftest$ac_exeext
-       }; then
+if ac_fn_c_try_link "$LINENO"; then :
 
 lt_aix_libpath_sed='
     /Import File Strings/,/^$/ {
@@ -12338,8319 +9962,4962 @@
 if test -z "$aix_libpath"; then
   aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
 fi
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-
 fi
-
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-      conftest$ac_exeext conftest.$ac_ext
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
 if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
 
-	hardcode_libdir_flag_spec_CXX='${wl}-blibpath:$libdir:'"$aix_libpath"
-	# Warning - without using the other run time loading flags,
-	# -berok will link without error, but may produce a broken library.
-	no_undefined_flag_CXX=' ${wl}-bernotok'
-	allow_undefined_flag_CXX=' ${wl}-berok'
-	# Exported symbols can be pulled into shared objects from archives
-	whole_archive_flag_spec_CXX='$convenience'
-	archive_cmds_need_lc_CXX=yes
-	# This is similar to how AIX traditionally builds its shared libraries.
-	archive_expsym_cmds_CXX="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
-      fi
-    fi
-    ;;
-
-  beos*)
-    if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-      allow_undefined_flag_CXX=unsupported
-      # Joseph Beckenbach <jrb3@best.com> says some releases of gcc
-      # support --undefined.  This deserves some investigation.  FIXME
-      archive_cmds_CXX='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-    else
-      ld_shlibs_CXX=no
-    fi
-    ;;
-
-  chorus*)
-    case $cc_basename in
-      *)
-	# FIXME: insert proper C++ library support
-	ld_shlibs_CXX=no
-	;;
-    esac
-    ;;
-
-  cygwin* | mingw* | pw32*)
-    # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, CXX) is actually meaningless,
-    # as there is no search path for DLLs.
-    hardcode_libdir_flag_spec_CXX='-L$libdir'
-    allow_undefined_flag_CXX=unsupported
-    always_export_symbols_CXX=no
-    enable_shared_with_static_runtimes_CXX=yes
-
-    if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
-      archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
-      # If the export-symbols file already is a .def file (1st line
-      # is EXPORTS), use it as is; otherwise, prepend...
-      archive_expsym_cmds_CXX='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
-	cp $export_symbols $output_objdir/$soname.def;
-      else
-	echo EXPORTS > $output_objdir/$soname.def;
-	cat $export_symbols >> $output_objdir/$soname.def;
-      fi~
-      $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
-    else
-      ld_shlibs_CXX=no
-    fi
-  ;;
-      darwin* | rhapsody*)
-      archive_cmds_need_lc_CXX=no
-      hardcode_direct_CXX=no
-      hardcode_automatic_CXX=yes
-      hardcode_shlibpath_var_CXX=unsupported
-      whole_archive_flag_spec_CXX=''
-      link_all_deplibs_CXX=yes
-      allow_undefined_flag_CXX="$_lt_dar_allow_undefined"
-      if test "$GXX" = yes ; then
-      output_verbose_link_cmd='echo'
-      archive_cmds_CXX="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}"
-      module_cmds_CXX="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}"
-      archive_expsym_cmds_CXX="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}"
-      module_expsym_cmds_CXX="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}"
-      if test "$lt_cv_apple_cc_single_mod" != "yes"; then
-        archive_cmds_CXX="\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dsymutil}"
-        archive_expsym_cmds_CXX="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dar_export_syms}${_lt_dsymutil}"
-      fi
-      else
-      case $cc_basename in
-        xlc*)
-         output_verbose_link_cmd='echo'
-          archive_cmds_CXX='$CC -qmkshrobj ${wl}-single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $xlcverstring'
-          module_cmds_CXX='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
-          # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
-          archive_expsym_cmds_CXX='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj ${wl}-single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $xlcverstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-          module_expsym_cmds_CXX='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag  -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-          ;;
-       *)
-         ld_shlibs_CXX=no
-          ;;
-      esac
-      fi
-        ;;
-
-  dgux*)
-    case $cc_basename in
-      ec++*)
-	# FIXME: insert proper C++ library support
-	ld_shlibs_CXX=no
-	;;
-      ghcx*)
-	# Green Hills C++ Compiler
-	# FIXME: insert proper C++ library support
-	ld_shlibs_CXX=no
-	;;
-      *)
-	# FIXME: insert proper C++ library support
-	ld_shlibs_CXX=no
-	;;
-    esac
-    ;;
-  freebsd[12]*)
-    # C++ shared libraries reported to be fairly broken before switch to ELF
-    ld_shlibs_CXX=no
-    ;;
-  freebsd-elf*)
-    archive_cmds_need_lc_CXX=no
-    ;;
-  freebsd* | dragonfly*)
-    # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF
-    # conventions
-    ld_shlibs_CXX=yes
-    ;;
-  gnu*)
-    ;;
-  hpux9*)
-    hardcode_libdir_flag_spec_CXX='${wl}+b ${wl}$libdir'
-    hardcode_libdir_separator_CXX=:
-    export_dynamic_flag_spec_CXX='${wl}-E'
-    hardcode_direct_CXX=yes
-    hardcode_minus_L_CXX=yes # Not in the search PATH,
-				# but as the default
-				# location of the library.
-
-    case $cc_basename in
-    CC*)
-      # FIXME: insert proper C++ library support
-      ld_shlibs_CXX=no
-      ;;
-    aCC*)
-      archive_cmds_CXX='$rm $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
-      # Commands to make compiler produce verbose output that lists
-      # what "hidden" libraries, object files and flags are used when
-      # linking a shared library.
-      #
-      # There doesn't appear to be a way to prevent this compiler from
-      # explicitly linking system object files so we need to strip them
-      # from the output so that they don't get included in the library
-      # dependencies.
-      output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "[-]L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
-      ;;
-    *)
-      if test "$GXX" = yes; then
-        archive_cmds_CXX='$rm $output_objdir/$soname~$CC -shared -nostdlib -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
-      else
-        # FIXME: insert proper C++ library support
-        ld_shlibs_CXX=no
+	 hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
+	  # Warning - without using the other run time loading flags,
+	  # -berok will link without error, but may produce a broken library.
+	  no_undefined_flag=' ${wl}-bernotok'
+	  allow_undefined_flag=' ${wl}-berok'
+	  # Exported symbols can be pulled into shared objects from archives
+	  whole_archive_flag_spec='$convenience'
+	  archive_cmds_need_lc=yes
+	  # This is similar to how AIX traditionally builds its shared libraries.
+	  archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
+	fi
       fi
       ;;
-    esac
-    ;;
-  hpux10*|hpux11*)
-    if test $with_gnu_ld = no; then
-      hardcode_libdir_flag_spec_CXX='${wl}+b ${wl}$libdir'
-      hardcode_libdir_separator_CXX=:
 
+    amigaos*)
       case $host_cpu in
-      hppa*64*|ia64*) ;;
-      *)
-	export_dynamic_flag_spec_CXX='${wl}-E'
+      powerpc)
+            # see comment about AmigaOS4 .so support
+            archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+            archive_expsym_cmds=''
+        ;;
+      m68k)
+            archive_cmds='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
+            hardcode_libdir_flag_spec='-L$libdir'
+            hardcode_minus_L=yes
         ;;
       esac
-    fi
-    case $host_cpu in
-    hppa*64*|ia64*)
-      hardcode_direct_CXX=no
-      hardcode_shlibpath_var_CXX=no
       ;;
-    *)
-      hardcode_direct_CXX=yes
-      hardcode_minus_L_CXX=yes # Not in the search PATH,
-					      # but as the default
-					      # location of the library.
+
+    bsdi[45]*)
+      export_dynamic_flag_spec=-rdynamic
       ;;
-    esac
 
-    case $cc_basename in
-      CC*)
-	# FIXME: insert proper C++ library support
-	ld_shlibs_CXX=no
-	;;
-      aCC*)
-	case $host_cpu in
-	hppa*64*)
-	  archive_cmds_CXX='$CC -b ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-	  ;;
-	ia64*)
-	  archive_cmds_CXX='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-	  ;;
-	*)
-	  archive_cmds_CXX='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-	  ;;
-	esac
-	# Commands to make compiler produce verbose output that lists
-	# what "hidden" libraries, object files and flags are used when
-	# linking a shared library.
-	#
-	# There doesn't appear to be a way to prevent this compiler from
-	# explicitly linking system object files so we need to strip them
-	# from the output so that they don't get included in the library
-	# dependencies.
-	output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
-	;;
-      *)
-	if test "$GXX" = yes; then
-	  if test $with_gnu_ld = no; then
-	    case $host_cpu in
-	    hppa*64*)
-	      archive_cmds_CXX='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-	      ;;
-	    ia64*)
-	      archive_cmds_CXX='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-	      ;;
-	    *)
-	      archive_cmds_CXX='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-	      ;;
-	    esac
-	  fi
-	else
-	  # FIXME: insert proper C++ library support
-	  ld_shlibs_CXX=no
-	fi
-	;;
-    esac
-    ;;
-  interix[3-9]*)
-    hardcode_direct_CXX=no
-    hardcode_shlibpath_var_CXX=no
-    hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir'
-    export_dynamic_flag_spec_CXX='${wl}-E'
-    # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
-    # Instead, shared libraries are loaded at an image base (0x10000000 by
-    # default) and relocated if they conflict, which is a slow very memory
-    # consuming and fragmenting process.  To avoid this, we pick a random,
-    # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
-    # time.  Moving up from 0x10000000 also allows more sbrk(2) space.
-    archive_cmds_CXX='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
-    archive_expsym_cmds_CXX='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
-    ;;
-  irix5* | irix6*)
-    case $cc_basename in
-      CC*)
-	# SGI C++
-	archive_cmds_CXX='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-
-	# Archives containing C++ object files must be created using
-	# "CC -ar", where "CC" is the IRIX C++ compiler.  This is
-	# necessary to make sure instantiated templates are included
-	# in the archive.
-	old_archive_cmds_CXX='$CC -ar -WR,-u -o $oldlib $oldobjs'
-	;;
-      *)
-	if test "$GXX" = yes; then
-	  if test "$with_gnu_ld" = no; then
-	    archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-	  else
-	    archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` -o $lib'
-	  fi
-	fi
-	link_all_deplibs_CXX=yes
-	;;
-    esac
-    hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir'
-    hardcode_libdir_separator_CXX=:
-    ;;
-  linux* | k*bsd*-gnu)
-    case $cc_basename in
-      KCC*)
-	# Kuck and Associates, Inc. (KAI) C++ Compiler
-
-	# KCC will only create a shared library if the output file
-	# ends with ".so" (or ".sl" for HP-UX), so rename the library
-	# to its proper name (with version) after linking.
-	archive_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
-	archive_expsym_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib'
-	# Commands to make compiler produce verbose output that lists
-	# what "hidden" libraries, object files and flags are used when
-	# linking a shared library.
-	#
-	# There doesn't appear to be a way to prevent this compiler from
-	# explicitly linking system object files so we need to strip them
-	# from the output so that they don't get included in the library
-	# dependencies.
-	output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | grep "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
-
-	hardcode_libdir_flag_spec_CXX='${wl}--rpath,$libdir'
-	export_dynamic_flag_spec_CXX='${wl}--export-dynamic'
-
-	# Archives containing C++ object files must be created using
-	# "CC -Bstatic", where "CC" is the KAI C++ compiler.
-	old_archive_cmds_CXX='$CC -Bstatic -o $oldlib $oldobjs'
-	;;
-      icpc*)
-	# Intel C++
-	with_gnu_ld=yes
-	# version 8.0 and above of icpc choke on multiply defined symbols
-	# if we add $predep_objects and $postdep_objects, however 7.1 and
-	# earlier do not add the objects themselves.
-	case `$CC -V 2>&1` in
-	*"Version 7."*)
-  	  archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
-  	  archive_expsym_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-	  ;;
-	*)  # Version 8.0 or newer
-	  tmp_idyn=
-	  case $host_cpu in
-	    ia64*) tmp_idyn=' -i_dynamic';;
-	  esac
-  	  archive_cmds_CXX='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-	  archive_expsym_cmds_CXX='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-	  ;;
-	esac
-	archive_cmds_need_lc_CXX=no
-	hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir'
-	export_dynamic_flag_spec_CXX='${wl}--export-dynamic'
-	whole_archive_flag_spec_CXX='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
-	;;
-      pgCC* | pgcpp*)
-        # Portland Group C++ compiler
-	archive_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
-  	archive_expsym_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
-
-	hardcode_libdir_flag_spec_CXX='${wl}--rpath ${wl}$libdir'
-	export_dynamic_flag_spec_CXX='${wl}--export-dynamic'
-	whole_archive_flag_spec_CXX='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
-        ;;
-      cxx*)
-	# Compaq C++
-	archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
-	archive_expsym_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname  -o $lib ${wl}-retain-symbols-file $wl$export_symbols'
-
-	runpath_var=LD_RUN_PATH
-	hardcode_libdir_flag_spec_CXX='-rpath $libdir'
-	hardcode_libdir_separator_CXX=:
+    cygwin* | mingw* | pw32* | cegcc*)
+      # When not using gcc, we currently assume that we are using
+      # Microsoft Visual C++.
+      # hardcode_libdir_flag_spec is actually meaningless, as there is
+      # no search path for DLLs.
+      hardcode_libdir_flag_spec=' '
+      allow_undefined_flag=unsupported
+      # Tell ltmain to make .lib files, not .a files.
+      libext=lib
+      # Tell ltmain to make .dll files, not .so files.
+      shrext_cmds=".dll"
+      # FIXME: Setting linknames here is a bad hack.
+      archive_cmds='$CC -o $lib $libobjs $compiler_flags `$ECHO "X$deplibs" | $Xsed -e '\''s/ -lc$//'\''` -link -dll~linknames='
+      # The linker will automatically build a .lib file if we build a DLL.
+      old_archive_from_new_cmds='true'
+      # FIXME: Should let the user specify the lib program.
+      old_archive_cmds='lib -OUT:$oldlib$oldobjs$old_deplibs'
+      fix_srcfile_path='`cygpath -w "$srcfile"`'
+      enable_shared_with_static_runtimes=yes
+      ;;
 
-	# Commands to make compiler produce verbose output that lists
-	# what "hidden" libraries, object files and flags are used when
-	# linking a shared library.
-	#
-	# There doesn't appear to be a way to prevent this compiler from
-	# explicitly linking system object files so we need to strip them
-	# from the output so that they don't get included in the library
-	# dependencies.
-	output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
-	;;
-      *)
-	case `$CC -V 2>&1 | sed 5q` in
-	*Sun\ C*)
-	  # Sun C++ 5.9
-	  no_undefined_flag_CXX=' -zdefs'
-	  archive_cmds_CXX='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-	  archive_expsym_cmds_CXX='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file ${wl}$export_symbols'
-	  hardcode_libdir_flag_spec_CXX='-R$libdir'
-	  whole_archive_flag_spec_CXX='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
+    darwin* | rhapsody*)
 
-	  # Not sure whether something based on
-	  # $CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1
-	  # would be better.
-	  output_verbose_link_cmd='echo'
-
-	  # Archives containing C++ object files must be created using
-	  # "CC -xar", where "CC" is the Sun C++ compiler.  This is
-	  # necessary to make sure instantiated templates are included
-	  # in the archive.
-	  old_archive_cmds_CXX='$CC -xar -o $oldlib $oldobjs'
-	  ;;
-	esac
-	;;
-    esac
-    ;;
-  lynxos*)
-    # FIXME: insert proper C++ library support
-    ld_shlibs_CXX=no
-    ;;
-  m88k*)
-    # FIXME: insert proper C++ library support
-    ld_shlibs_CXX=no
-    ;;
-  mvs*)
-    case $cc_basename in
-      cxx*)
-	# FIXME: insert proper C++ library support
-	ld_shlibs_CXX=no
-	;;
-      *)
-	# FIXME: insert proper C++ library support
-	ld_shlibs_CXX=no
-	;;
-    esac
-    ;;
-  netbsd*)
-    if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-      archive_cmds_CXX='$LD -Bshareable  -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags'
-      wlarc=
-      hardcode_libdir_flag_spec_CXX='-R$libdir'
-      hardcode_direct_CXX=yes
-      hardcode_shlibpath_var_CXX=no
-    fi
-    # Workaround some broken pre-1.5 toolchains
-    output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"'
-    ;;
-  openbsd2*)
-    # C++ shared libraries are fairly broken
-    ld_shlibs_CXX=no
-    ;;
-  openbsd*)
-    if test -f /usr/libexec/ld.so; then
-      hardcode_direct_CXX=yes
-      hardcode_shlibpath_var_CXX=no
-      archive_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
-      hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir'
-      if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-	archive_expsym_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib'
-	export_dynamic_flag_spec_CXX='${wl}-E'
-	whole_archive_flag_spec_CXX="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
-      fi
-      output_verbose_link_cmd='echo'
-    else
-      ld_shlibs_CXX=no
-    fi
-    ;;
-  osf3*)
-    case $cc_basename in
-      KCC*)
-	# Kuck and Associates, Inc. (KAI) C++ Compiler
-
-	# KCC will only create a shared library if the output file
-	# ends with ".so" (or ".sl" for HP-UX), so rename the library
-	# to its proper name (with version) after linking.
-	archive_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
 
-	hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir'
-	hardcode_libdir_separator_CXX=:
+  archive_cmds_need_lc=no
+  hardcode_direct=no
+  hardcode_automatic=yes
+  hardcode_shlibpath_var=unsupported
+  whole_archive_flag_spec=''
+  link_all_deplibs=yes
+  allow_undefined_flag="$_lt_dar_allow_undefined"
+  case $cc_basename in
+     ifort*) _lt_dar_can_shared=yes ;;
+     *) _lt_dar_can_shared=$GCC ;;
+  esac
+  if test "$_lt_dar_can_shared" = "yes"; then
+    output_verbose_link_cmd=echo
+    archive_cmds="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}"
+    module_cmds="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}"
+    archive_expsym_cmds="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}"
+    module_expsym_cmds="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}"
 
-	# Archives containing C++ object files must be created using
-	# "CC -Bstatic", where "CC" is the KAI C++ compiler.
-	old_archive_cmds_CXX='$CC -Bstatic -o $oldlib $oldobjs'
+  else
+  ld_shlibs=no
+  fi
 
-	;;
-      RCC*)
-	# Rational C++ 2.4.1
-	# FIXME: insert proper C++ library support
-	ld_shlibs_CXX=no
-	;;
-      cxx*)
-	allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*'
-	archive_cmds_CXX='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && echo ${wl}-set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-
-	hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir'
-	hardcode_libdir_separator_CXX=:
-
-	# Commands to make compiler produce verbose output that lists
-	# what "hidden" libraries, object files and flags are used when
-	# linking a shared library.
-	#
-	# There doesn't appear to be a way to prevent this compiler from
-	# explicitly linking system object files so we need to strip them
-	# from the output so that they don't get included in the library
-	# dependencies.
-	output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
-	;;
-      *)
-	if test "$GXX" = yes && test "$with_gnu_ld" = no; then
-	  allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*'
-	  archive_cmds_CXX='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+      ;;
 
-	  hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir'
-	  hardcode_libdir_separator_CXX=:
+    dgux*)
+      archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      hardcode_libdir_flag_spec='-L$libdir'
+      hardcode_shlibpath_var=no
+      ;;
 
-	  # Commands to make compiler produce verbose output that lists
-	  # what "hidden" libraries, object files and flags are used when
-	  # linking a shared library.
-	  output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"'
+    freebsd1*)
+      ld_shlibs=no
+      ;;
 
-	else
-	  # FIXME: insert proper C++ library support
-	  ld_shlibs_CXX=no
-	fi
-	;;
-    esac
-    ;;
-  osf4* | osf5*)
-    case $cc_basename in
-      KCC*)
-	# Kuck and Associates, Inc. (KAI) C++ Compiler
-
-	# KCC will only create a shared library if the output file
-	# ends with ".so" (or ".sl" for HP-UX), so rename the library
-	# to its proper name (with version) after linking.
-	archive_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
+    # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
+    # support.  Future versions do this automatically, but an explicit c++rt0.o
+    # does not break anything, and helps significantly (at the cost of a little
+    # extra space).
+    freebsd2.2*)
+      archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
+      hardcode_libdir_flag_spec='-R$libdir'
+      hardcode_direct=yes
+      hardcode_shlibpath_var=no
+      ;;
 
-	hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir'
-	hardcode_libdir_separator_CXX=:
+    # Unfortunately, older versions of FreeBSD 2 do not have this feature.
+    freebsd2*)
+      archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+      hardcode_direct=yes
+      hardcode_minus_L=yes
+      hardcode_shlibpath_var=no
+      ;;
 
-	# Archives containing C++ object files must be created using
-	# the KAI C++ compiler.
-	old_archive_cmds_CXX='$CC -o $oldlib $oldobjs'
-	;;
-      RCC*)
-	# Rational C++ 2.4.1
-	# FIXME: insert proper C++ library support
-	ld_shlibs_CXX=no
-	;;
-      cxx*)
-	allow_undefined_flag_CXX=' -expect_unresolved \*'
-	archive_cmds_CXX='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-	archive_expsym_cmds_CXX='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~
-	  echo "-hidden">> $lib.exp~
-	  $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname -Wl,-input -Wl,$lib.exp  `test -n "$verstring" && echo -set_version	$verstring` -update_registry ${output_objdir}/so_locations -o $lib~
-	  $rm $lib.exp'
-
-	hardcode_libdir_flag_spec_CXX='-rpath $libdir'
-	hardcode_libdir_separator_CXX=:
-
-	# Commands to make compiler produce verbose output that lists
-	# what "hidden" libraries, object files and flags are used when
-	# linking a shared library.
-	#
-	# There doesn't appear to be a way to prevent this compiler from
-	# explicitly linking system object files so we need to strip them
-	# from the output so that they don't get included in the library
-	# dependencies.
-	output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
-	;;
-      *)
-	if test "$GXX" = yes && test "$with_gnu_ld" = no; then
-	  allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*'
-	 archive_cmds_CXX='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+    # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
+    freebsd* | dragonfly*)
+      archive_cmds='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
+      hardcode_libdir_flag_spec='-R$libdir'
+      hardcode_direct=yes
+      hardcode_shlibpath_var=no
+      ;;
 
-	  hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir'
-	  hardcode_libdir_separator_CXX=:
+    hpux9*)
+      if test "$GCC" = yes; then
+	archive_cmds='$RM $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+      else
+	archive_cmds='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+      fi
+      hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
+      hardcode_libdir_separator=:
+      hardcode_direct=yes
 
-	  # Commands to make compiler produce verbose output that lists
-	  # what "hidden" libraries, object files and flags are used when
-	  # linking a shared library.
-	  output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"'
+      # hardcode_minus_L: Not really in the search PATH,
+      # but as the default location of the library.
+      hardcode_minus_L=yes
+      export_dynamic_flag_spec='${wl}-E'
+      ;;
 
-	else
-	  # FIXME: insert proper C++ library support
-	  ld_shlibs_CXX=no
-	fi
-	;;
-    esac
-    ;;
-  psos*)
-    # FIXME: insert proper C++ library support
-    ld_shlibs_CXX=no
-    ;;
-  sunos4*)
-    case $cc_basename in
-      CC*)
-	# Sun C++ 4.x
-	# FIXME: insert proper C++ library support
-	ld_shlibs_CXX=no
-	;;
-      lcc*)
-	# Lucid
-	# FIXME: insert proper C++ library support
-	ld_shlibs_CXX=no
-	;;
-      *)
-	# FIXME: insert proper C++ library support
-	ld_shlibs_CXX=no
-	;;
-    esac
-    ;;
-  solaris*)
-    case $cc_basename in
-      CC*)
-	# Sun C++ 4.2, 5.x and Centerline C++
-        archive_cmds_need_lc_CXX=yes
-	no_undefined_flag_CXX=' -zdefs'
-	archive_cmds_CXX='$CC -G${allow_undefined_flag}  -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-	archive_expsym_cmds_CXX='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-	$CC -G${allow_undefined_flag}  ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'
+    hpux10*)
+      if test "$GCC" = yes -a "$with_gnu_ld" = no; then
+	archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+      else
+	archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
+      fi
+      if test "$with_gnu_ld" = no; then
+	hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
+	hardcode_libdir_flag_spec_ld='+b $libdir'
+	hardcode_libdir_separator=:
+	hardcode_direct=yes
+	hardcode_direct_absolute=yes
+	export_dynamic_flag_spec='${wl}-E'
+	# hardcode_minus_L: Not really in the search PATH,
+	# but as the default location of the library.
+	hardcode_minus_L=yes
+      fi
+      ;;
 
-	hardcode_libdir_flag_spec_CXX='-R$libdir'
-	hardcode_shlibpath_var_CXX=no
-	case $host_os in
-	  solaris2.[0-5] | solaris2.[0-5].*) ;;
-	  *)
-	    # The compiler driver will combine and reorder linker options,
-	    # but understands `-z linker_flag'.
-	    # Supported since Solaris 2.6 (maybe 2.5.1?)
-	    whole_archive_flag_spec_CXX='-z allextract$convenience -z defaultextract'
-	    ;;
+    hpux11*)
+      if test "$GCC" = yes -a "$with_gnu_ld" = no; then
+	case $host_cpu in
+	hppa*64*)
+	  archive_cmds='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	ia64*)
+	  archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	*)
+	  archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
 	esac
-	link_all_deplibs_CXX=yes
+      else
+	case $host_cpu in
+	hppa*64*)
+	  archive_cmds='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	ia64*)
+	  archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	*)
+	  archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	esac
+      fi
+      if test "$with_gnu_ld" = no; then
+	hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
+	hardcode_libdir_separator=:
 
-	output_verbose_link_cmd='echo'
+	case $host_cpu in
+	hppa*64*|ia64*)
+	  hardcode_direct=no
+	  hardcode_shlibpath_var=no
+	  ;;
+	*)
+	  hardcode_direct=yes
+	  hardcode_direct_absolute=yes
+	  export_dynamic_flag_spec='${wl}-E'
 
-	# Archives containing C++ object files must be created using
-	# "CC -xar", where "CC" is the Sun C++ compiler.  This is
-	# necessary to make sure instantiated templates are included
-	# in the archive.
-	old_archive_cmds_CXX='$CC -xar -o $oldlib $oldobjs'
-	;;
-      gcx*)
-	# Green Hills C++ Compiler
-	archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
+	  # hardcode_minus_L: Not really in the search PATH,
+	  # but as the default location of the library.
+	  hardcode_minus_L=yes
+	  ;;
+	esac
+      fi
+      ;;
 
-	# The C++ compiler must be used to create the archive.
-	old_archive_cmds_CXX='$CC $LDFLAGS -archive -o $oldlib $oldobjs'
-	;;
-      *)
-	# GNU C++ compiler with Solaris linker
-	if test "$GXX" = yes && test "$with_gnu_ld" = no; then
-	  no_undefined_flag_CXX=' ${wl}-z ${wl}defs'
-	  if $CC --version | grep -v '^2\.7' > /dev/null; then
-	    archive_cmds_CXX='$CC -shared -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
-	    archive_expsym_cmds_CXX='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-		$CC -shared -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'
+    irix5* | irix6* | nonstopux*)
+      if test "$GCC" = yes; then
+	archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+	# Try to use the -exported_symbol ld option, if it does not
+	# work, assume that -exports_file does not work either and
+	# implicitly export all symbols.
+        save_LDFLAGS="$LDFLAGS"
+        LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null"
+        cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+int foo(void) {}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib'
 
-	    # Commands to make compiler produce verbose output that lists
-	    # what "hidden" libraries, object files and flags are used when
-	    # linking a shared library.
-	    output_verbose_link_cmd="$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep \"\-L\""
-	  else
-	    # g++ 2.7 appears to require `-G' NOT `-shared' on this
-	    # platform.
-	    archive_cmds_CXX='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
-	    archive_expsym_cmds_CXX='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-		$CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+        LDFLAGS="$save_LDFLAGS"
+      else
+	archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
+	archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib'
+      fi
+      archive_cmds_need_lc='no'
+      hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+      hardcode_libdir_separator=:
+      inherit_rpath=yes
+      link_all_deplibs=yes
+      ;;
 
-	    # Commands to make compiler produce verbose output that lists
-	    # what "hidden" libraries, object files and flags are used when
-	    # linking a shared library.
-	    output_verbose_link_cmd="$CC -G $CFLAGS -v conftest.$objext 2>&1 | grep \"\-L\""
-	  fi
+    netbsd* | netbsdelf*-gnu)
+      if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+	archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'  # a.out
+      else
+	archive_cmds='$LD -shared -o $lib $libobjs $deplibs $linker_flags'      # ELF
+      fi
+      hardcode_libdir_flag_spec='-R$libdir'
+      hardcode_direct=yes
+      hardcode_shlibpath_var=no
+      ;;
+
+    newsos6)
+      archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      hardcode_direct=yes
+      hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+      hardcode_libdir_separator=:
+      hardcode_shlibpath_var=no
+      ;;
 
-	  hardcode_libdir_flag_spec_CXX='${wl}-R $wl$libdir'
+    *nto* | *qnx*)
+      ;;
+
+    openbsd*)
+      if test -f /usr/libexec/ld.so; then
+	hardcode_direct=yes
+	hardcode_shlibpath_var=no
+	hardcode_direct_absolute=yes
+	if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+	  archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+	  archive_expsym_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
+	  hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
+	  export_dynamic_flag_spec='${wl}-E'
+	else
 	  case $host_os in
-	  solaris2.[0-5] | solaris2.[0-5].*) ;;
-	  *)
-	    whole_archive_flag_spec_CXX='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
-	    ;;
+	   openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*)
+	     archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+	     hardcode_libdir_flag_spec='-R$libdir'
+	     ;;
+	   *)
+	     archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+	     hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
+	     ;;
 	  esac
 	fi
-	;;
-    esac
-    ;;
-  sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*)
-    no_undefined_flag_CXX='${wl}-z,text'
-    archive_cmds_need_lc_CXX=no
-    hardcode_shlibpath_var_CXX=no
-    runpath_var='LD_RUN_PATH'
-
-    case $cc_basename in
-      CC*)
-	archive_cmds_CXX='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-	archive_expsym_cmds_CXX='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-	;;
+      else
+	ld_shlibs=no
+      fi
+      ;;
+
+    os2*)
+      hardcode_libdir_flag_spec='-L$libdir'
+      hardcode_minus_L=yes
+      allow_undefined_flag=unsupported
+      archive_cmds='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$ECHO DATA >> $output_objdir/$libname.def~$ECHO " SINGLE NONSHARED" >> $output_objdir/$libname.def~$ECHO EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
+      old_archive_from_new_cmds='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
+      ;;
+
+    osf3*)
+      if test "$GCC" = yes; then
+	allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
+	archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+      else
+	allow_undefined_flag=' -expect_unresolved \*'
+	archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
+      fi
+      archive_cmds_need_lc='no'
+      hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+      hardcode_libdir_separator=:
+      ;;
+
+    osf4* | osf5*)	# as osf3* with the addition of -msym flag
+      if test "$GCC" = yes; then
+	allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
+	archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+	hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+      else
+	allow_undefined_flag=' -expect_unresolved \*'
+	archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
+	archive_expsym_cmds='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~
+	$CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp'
+
+	# Both c and cxx compiler support -rpath directly
+	hardcode_libdir_flag_spec='-rpath $libdir'
+      fi
+      archive_cmds_need_lc='no'
+      hardcode_libdir_separator=:
+      ;;
+
+    solaris*)
+      no_undefined_flag=' -z defs'
+      if test "$GCC" = yes; then
+	wlarc='${wl}'
+	archive_cmds='$CC -shared ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+	  $CC -shared ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
+      else
+	case `$CC -V 2>&1` in
+	*"Compilers 5.0"*)
+	  wlarc=''
+	  archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	  archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+	  $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp'
+	  ;;
+	*)
+	  wlarc='${wl}'
+	  archive_cmds='$CC -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $compiler_flags'
+	  archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+	  $CC -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
+	  ;;
+	esac
+      fi
+      hardcode_libdir_flag_spec='-R$libdir'
+      hardcode_shlibpath_var=no
+      case $host_os in
+      solaris2.[0-5] | solaris2.[0-5].*) ;;
       *)
-	archive_cmds_CXX='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-	archive_expsym_cmds_CXX='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	# The compiler driver will combine and reorder linker options,
+	# but understands `-z linker_flag'.  GCC discards it without `$wl',
+	# but is careful enough not to reorder.
+	# Supported since Solaris 2.6 (maybe 2.5.1?)
+	if test "$GCC" = yes; then
+	  whole_archive_flag_spec='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
+	else
+	  whole_archive_flag_spec='-z allextract$convenience -z defaultextract'
+	fi
 	;;
-    esac
-    ;;
-  sysv5* | sco3.2v5* | sco5v6*)
-    # Note: We can NOT use -z defs as we might desire, because we do not
-    # link with -lc, and that would cause any symbols used from libc to
-    # always be unresolved, which means just about no library would
-    # ever link correctly.  If we're not using GNU ld we use -z text
-    # though, which does catch some bad symbols but isn't as heavy-handed
-    # as -z defs.
-    # For security reasons, it is highly recommended that you always
-    # use absolute paths for naming shared libraries, and exclude the
-    # DT_RUNPATH tag from executables and libraries.  But doing so
-    # requires that you compile everything twice, which is a pain.
-    # So that behaviour is only enabled if SCOABSPATH is set to a
-    # non-empty value in the environment.  Most likely only useful for
-    # creating official distributions of packages.
-    # This is a hack until libtool officially supports absolute path
-    # names for shared libraries.
-    no_undefined_flag_CXX='${wl}-z,text'
-    allow_undefined_flag_CXX='${wl}-z,nodefs'
-    archive_cmds_need_lc_CXX=no
-    hardcode_shlibpath_var_CXX=no
-    hardcode_libdir_flag_spec_CXX='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`'
-    hardcode_libdir_separator_CXX=':'
-    link_all_deplibs_CXX=yes
-    export_dynamic_flag_spec_CXX='${wl}-Bexport'
-    runpath_var='LD_RUN_PATH'
-
-    case $cc_basename in
-      CC*)
-	archive_cmds_CXX='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
-	archive_expsym_cmds_CXX='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
+      esac
+      link_all_deplibs=yes
+      ;;
+
+    sunos4*)
+      if test "x$host_vendor" = xsequent; then
+	# Use $CC to link under sequent, because it throws in some extra .o
+	# files that make .init and .fini sections work.
+	archive_cmds='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
+      else
+	archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
+      fi
+      hardcode_libdir_flag_spec='-L$libdir'
+      hardcode_direct=yes
+      hardcode_minus_L=yes
+      hardcode_shlibpath_var=no
+      ;;
+
+    sysv4)
+      case $host_vendor in
+	sni)
+	  archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	  hardcode_direct=yes # is this really true???
 	;;
-      *)
-	archive_cmds_CXX='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
-	archive_expsym_cmds_CXX='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	siemens)
+	  ## LD is ld it makes a PLAMLIB
+	  ## CC just makes a GrossModule.
+	  archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags'
+	  reload_cmds='$CC -r -o $output$reload_objs'
+	  hardcode_direct=no
+        ;;
+	motorola)
+	  archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	  hardcode_direct=no #Motorola manual says yes, but my tests say they lie
 	;;
+      esac
+      runpath_var='LD_RUN_PATH'
+      hardcode_shlibpath_var=no
+      ;;
+
+    sysv4.3*)
+      archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      hardcode_shlibpath_var=no
+      export_dynamic_flag_spec='-Bexport'
+      ;;
+
+    sysv4*MP*)
+      if test -d /usr/nec; then
+	archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	hardcode_shlibpath_var=no
+	runpath_var=LD_RUN_PATH
+	hardcode_runpath_var=yes
+	ld_shlibs=yes
+      fi
+      ;;
+
+    sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*)
+      no_undefined_flag='${wl}-z,text'
+      archive_cmds_need_lc=no
+      hardcode_shlibpath_var=no
+      runpath_var='LD_RUN_PATH'
+
+      if test "$GCC" = yes; then
+	archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+      else
+	archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+      fi
+      ;;
+
+    sysv5* | sco3.2v5* | sco5v6*)
+      # Note: We can NOT use -z defs as we might desire, because we do not
+      # link with -lc, and that would cause any symbols used from libc to
+      # always be unresolved, which means just about no library would
+      # ever link correctly.  If we're not using GNU ld we use -z text
+      # though, which does catch some bad symbols but isn't as heavy-handed
+      # as -z defs.
+      no_undefined_flag='${wl}-z,text'
+      allow_undefined_flag='${wl}-z,nodefs'
+      archive_cmds_need_lc=no
+      hardcode_shlibpath_var=no
+      hardcode_libdir_flag_spec='${wl}-R,$libdir'
+      hardcode_libdir_separator=':'
+      link_all_deplibs=yes
+      export_dynamic_flag_spec='${wl}-Bexport'
+      runpath_var='LD_RUN_PATH'
+
+      if test "$GCC" = yes; then
+	archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+      else
+	archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+      fi
+      ;;
+
+    uts4*)
+      archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      hardcode_libdir_flag_spec='-L$libdir'
+      hardcode_shlibpath_var=no
+      ;;
+
+    *)
+      ld_shlibs=no
+      ;;
     esac
-    ;;
-  tandem*)
-    case $cc_basename in
-      NCC*)
-	# NonStop-UX NCC 3.20
-	# FIXME: insert proper C++ library support
-	ld_shlibs_CXX=no
-	;;
-      *)
-	# FIXME: insert proper C++ library support
-	ld_shlibs_CXX=no
+
+    if test x$host_vendor = xsni; then
+      case $host in
+      sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
+	export_dynamic_flag_spec='${wl}-Blargedynsym'
 	;;
-    esac
-    ;;
-  vxworks*)
-    # FIXME: insert proper C++ library support
-    ld_shlibs_CXX=no
-    ;;
-  *)
-    # FIXME: insert proper C++ library support
-    ld_shlibs_CXX=no
-    ;;
-esac
-{ $as_echo "$as_me:$LINENO: result: $ld_shlibs_CXX" >&5
-$as_echo "$ld_shlibs_CXX" >&6; }
-test "$ld_shlibs_CXX" = no && can_build_shared=no
+      esac
+    fi
+  fi
 
-GCC_CXX="$GXX"
-LD_CXX="$LD"
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ld_shlibs" >&5
+$as_echo "$ld_shlibs" >&6; }
+test "$ld_shlibs" = no && can_build_shared=no
 
-cat > conftest.$ac_ext <<EOF
-class Foo
-{
-public:
-  Foo (void) { a = 0; }
-private:
-  int a;
-};
-EOF
+with_gnu_ld=$with_gnu_ld
 
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; then
-  # Parse the compiler output and extract the necessary
-  # objects, libraries and library flags.
 
-  # Sentinel used to keep track of whether or not we are before
-  # the conftest object file.
-  pre_test_object_deps_done=no
 
-  # The `*' in the case matches for architectures that use `case' in
-  # $output_verbose_cmd can trigger glob expansion during the loop
-  # eval without this substitution.
-  output_verbose_link_cmd=`$echo "X$output_verbose_link_cmd" | $Xsed -e "$no_glob_subst"`
 
-  for p in `eval $output_verbose_link_cmd`; do
-    case $p in
 
-    -L* | -R* | -l*)
-       # Some compilers place space between "-{L,R}" and the path.
-       # Remove the space.
-       if test $p = "-L" \
-	  || test $p = "-R"; then
-	 prev=$p
-	 continue
-       else
-	 prev=
-       fi
 
-       if test "$pre_test_object_deps_done" = no; then
-	 case $p in
-	 -L* | -R*)
-	   # Internal compiler library paths should come after those
-	   # provided the user.  The postdeps already come after the
-	   # user supplied libs so there is no need to process them.
-	   if test -z "$compiler_lib_search_path_CXX"; then
-	     compiler_lib_search_path_CXX="${prev}${p}"
-	   else
-	     compiler_lib_search_path_CXX="${compiler_lib_search_path_CXX} ${prev}${p}"
-	   fi
-	   ;;
-	 # The "-l" case would never come before the object being
-	 # linked, so don't bother handling this case.
-	 esac
-       else
-	 if test -z "$postdeps_CXX"; then
-	   postdeps_CXX="${prev}${p}"
-	 else
-	   postdeps_CXX="${postdeps_CXX} ${prev}${p}"
-	 fi
-       fi
-       ;;
 
-    *.$objext)
-       # This assumes that the test object file only shows up
-       # once in the compiler output.
-       if test "$p" = "conftest.$objext"; then
-	 pre_test_object_deps_done=yes
-	 continue
-       fi
 
-       if test "$pre_test_object_deps_done" = no; then
-	 if test -z "$predep_objects_CXX"; then
-	   predep_objects_CXX="$p"
-	 else
-	   predep_objects_CXX="$predep_objects_CXX $p"
-	 fi
-       else
-	 if test -z "$postdep_objects_CXX"; then
-	   postdep_objects_CXX="$p"
-	 else
-	   postdep_objects_CXX="$postdep_objects_CXX $p"
-	 fi
-       fi
-       ;;
 
-    *) ;; # Ignore the rest.
 
-    esac
-  done
 
-  # Clean up.
-  rm -f a.out a.exe
-else
-  echo "libtool.m4: error: problem compiling CXX test program"
-fi
 
-$rm -f confest.$objext
 
-compiler_lib_search_dirs_CXX=
-if test -n "$compiler_lib_search_path_CXX"; then
-  compiler_lib_search_dirs_CXX=`echo " ${compiler_lib_search_path_CXX}" | ${SED} -e 's! -L! !g' -e 's!^ !!'`
-fi
 
-# PORTME: override above test on systems where it is broken
-case $host_os in
-interix[3-9]*)
-  # Interix 3.5 installs completely hosed .la files for C++, so rather than
-  # hack all around it, let's just trust "g++" to DTRT.
-  predep_objects_CXX=
-  postdep_objects_CXX=
-  postdeps_CXX=
-  ;;
 
-linux*)
-  case `$CC -V 2>&1 | sed 5q` in
-  *Sun\ C*)
-    # Sun C++ 5.9
-    #
-    # The more standards-conforming stlport4 library is
-    # incompatible with the Cstd library. Avoid specifying
-    # it if it's in CXXFLAGS. Ignore libCrun as
-    # -library=stlport4 depends on it.
-    case " $CXX $CXXFLAGS " in
-    *" -library=stlport4 "*)
-      solaris_use_stlport4=yes
+#
+# Do we need to explicitly link libc?
+#
+case "x$archive_cmds_need_lc" in
+x|xyes)
+  # Assume -lc should be added
+  archive_cmds_need_lc=yes
+
+  if test "$enable_shared" = yes && test "$GCC" = yes; then
+    case $archive_cmds in
+    *'~'*)
+      # FIXME: we may have to deal with multi-command sequences.
       ;;
-    esac
-    if test "$solaris_use_stlport4" != yes; then
-      postdeps_CXX='-library=Cstd -library=Crun'
-    fi
-    ;;
-  esac
-  ;;
+    '$CC '*)
+      # Test whether the compiler implicitly links with -lc since on some
+      # systems, -lgcc has to come before -lc. If gcc already passes -lc
+      # to ld, don't add -lc before -lgcc.
+      { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether -lc should be explicitly linked in" >&5
+$as_echo_n "checking whether -lc should be explicitly linked in... " >&6; }
+      $RM conftest*
+      echo "$lt_simple_compile_test_code" > conftest.$ac_ext
 
-solaris*)
-  case $cc_basename in
-  CC*)
-    # The more standards-conforming stlport4 library is
-    # incompatible with the Cstd library. Avoid specifying
-    # it if it's in CXXFLAGS. Ignore libCrun as
-    # -library=stlport4 depends on it.
-    case " $CXX $CXXFLAGS " in
-    *" -library=stlport4 "*)
-      solaris_use_stlport4=yes
+      if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } 2>conftest.err; then
+        soname=conftest
+        lib=conftest
+        libobjs=conftest.$ac_objext
+        deplibs=
+        wl=$lt_prog_compiler_wl
+	pic_flag=$lt_prog_compiler_pic
+        compiler_flags=-v
+        linker_flags=-v
+        verstring=
+        output_objdir=.
+        libname=conftest
+        lt_save_allow_undefined_flag=$allow_undefined_flag
+        allow_undefined_flag=
+        if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1\""; } >&5
+  (eval $archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }
+        then
+	  archive_cmds_need_lc=no
+        else
+	  archive_cmds_need_lc=yes
+        fi
+        allow_undefined_flag=$lt_save_allow_undefined_flag
+      else
+        cat conftest.err 1>&5
+      fi
+      $RM conftest*
+      { $as_echo "$as_me:${as_lineno-$LINENO}: result: $archive_cmds_need_lc" >&5
+$as_echo "$archive_cmds_need_lc" >&6; }
       ;;
     esac
-
-    # Adding this requires a known-good setup of shared libraries for
-    # Sun compiler versions before 5.6, else PIC objects from an old
-    # archive will be linked into the output, leading to subtle bugs.
-    if test "$solaris_use_stlport4" != yes; then
-      postdeps_CXX='-library=Cstd -library=Crun'
-    fi
-    ;;
-  esac
+  fi
   ;;
 esac
 
-case " $postdeps_CXX " in
-*" -lc "*) archive_cmds_need_lc_CXX=no ;;
-esac
 
-lt_prog_compiler_wl_CXX=
-lt_prog_compiler_pic_CXX=
-lt_prog_compiler_static_CXX=
 
-{ $as_echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5
-$as_echo_n "checking for $compiler option to produce PIC... " >&6; }
 
-  # C++ specific cases for pic, static, wl, etc.
-  if test "$GXX" = yes; then
-    lt_prog_compiler_wl_CXX='-Wl,'
-    lt_prog_compiler_static_CXX='-static'
 
-    case $host_os in
-    aix*)
-      # All AIX code is PIC.
-      if test "$host_cpu" = ia64; then
-	# AIX 5 now supports IA64 processor
-	lt_prog_compiler_static_CXX='-Bstatic'
-      fi
-      ;;
-    amigaos*)
-      # FIXME: we need at least 68020 code to build shared libraries, but
-      # adding the `-m68020' flag to GCC prevents building anything better,
-      # like `-m68040'.
-      lt_prog_compiler_pic_CXX='-m68020 -resident32 -malways-restore-a4'
-      ;;
-    beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
-      # PIC is the default for these OSes.
-      ;;
-    mingw* | cygwin* | os2* | pw32*)
-      # This hack is so that the source file can tell whether it is being
-      # built for inclusion in a dll (and should export symbols for example).
-      # Although the cygwin gcc ignores -fPIC, still need this for old-style
-      # (--disable-auto-import) libraries
-      lt_prog_compiler_pic_CXX='-DDLL_EXPORT'
-      ;;
-    darwin* | rhapsody*)
-      # PIC is the default on this platform
-      # Common symbols not allowed in MH_DYLIB files
-      lt_prog_compiler_pic_CXX='-fno-common'
-      ;;
-    *djgpp*)
-      # DJGPP does not support shared libraries at all
-      lt_prog_compiler_pic_CXX=
-      ;;
-    interix[3-9]*)
-      # Interix 3.x gcc -fpic/-fPIC options generate broken code.
-      # Instead, we relocate shared libraries at runtime.
-      ;;
-    sysv4*MP*)
-      if test -d /usr/nec; then
-	lt_prog_compiler_pic_CXX=-Kconform_pic
-      fi
-      ;;
-    hpux*)
-      # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
-      # not for PA HP-UX.
-      case $host_cpu in
-      hppa*64*|ia64*)
-	;;
-      *)
-	lt_prog_compiler_pic_CXX='-fPIC'
-	;;
-      esac
-      ;;
-    *)
-      lt_prog_compiler_pic_CXX='-fPIC'
-      ;;
-    esac
-  else
-    case $host_os in
-      aix[4-9]*)
-	# All AIX code is PIC.
-	if test "$host_cpu" = ia64; then
-	  # AIX 5 now supports IA64 processor
-	  lt_prog_compiler_static_CXX='-Bstatic'
-	else
-	  lt_prog_compiler_static_CXX='-bnso -bI:/lib/syscalls.exp'
-	fi
-	;;
-      chorus*)
-	case $cc_basename in
-	cxch68*)
-	  # Green Hills C++ Compiler
-	  # _LT_AC_TAGVAR(lt_prog_compiler_static, CXX)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a"
-	  ;;
-	esac
-	;;
-       darwin*)
-         # PIC is the default on this platform
-         # Common symbols not allowed in MH_DYLIB files
-         case $cc_basename in
-           xlc*)
-           lt_prog_compiler_pic_CXX='-qnocommon'
-           lt_prog_compiler_wl_CXX='-Wl,'
-           ;;
-         esac
-       ;;
-      dgux*)
-	case $cc_basename in
-	  ec++*)
-	    lt_prog_compiler_pic_CXX='-KPIC'
-	    ;;
-	  ghcx*)
-	    # Green Hills C++ Compiler
-	    lt_prog_compiler_pic_CXX='-pic'
-	    ;;
-	  *)
-	    ;;
-	esac
-	;;
-      freebsd* | dragonfly*)
-	# FreeBSD uses GNU C++
-	;;
-      hpux9* | hpux10* | hpux11*)
-	case $cc_basename in
-	  CC*)
-	    lt_prog_compiler_wl_CXX='-Wl,'
-	    lt_prog_compiler_static_CXX='${wl}-a ${wl}archive'
-	    if test "$host_cpu" != ia64; then
-	      lt_prog_compiler_pic_CXX='+Z'
-	    fi
-	    ;;
-	  aCC*)
-	    lt_prog_compiler_wl_CXX='-Wl,'
-	    lt_prog_compiler_static_CXX='${wl}-a ${wl}archive'
-	    case $host_cpu in
-	    hppa*64*|ia64*)
-	      # +Z the default
-	      ;;
-	    *)
-	      lt_prog_compiler_pic_CXX='+Z'
-	      ;;
-	    esac
-	    ;;
-	  *)
-	    ;;
-	esac
-	;;
-      interix*)
-	# This is c89, which is MS Visual C++ (no shared libs)
-	# Anyone wants to do a port?
-	;;
-      irix5* | irix6* | nonstopux*)
-	case $cc_basename in
-	  CC*)
-	    lt_prog_compiler_wl_CXX='-Wl,'
-	    lt_prog_compiler_static_CXX='-non_shared'
-	    # CC pic flag -KPIC is the default.
-	    ;;
-	  *)
-	    ;;
-	esac
-	;;
-      linux* | k*bsd*-gnu)
-	case $cc_basename in
-	  KCC*)
-	    # KAI C++ Compiler
-	    lt_prog_compiler_wl_CXX='--backend -Wl,'
-	    lt_prog_compiler_pic_CXX='-fPIC'
-	    ;;
-	  icpc* | ecpc*)
-	    # Intel C++
-	    lt_prog_compiler_wl_CXX='-Wl,'
-	    lt_prog_compiler_pic_CXX='-KPIC'
-	    lt_prog_compiler_static_CXX='-static'
-	    ;;
-	  pgCC* | pgcpp*)
-	    # Portland Group C++ compiler.
-	    lt_prog_compiler_wl_CXX='-Wl,'
-	    lt_prog_compiler_pic_CXX='-fpic'
-	    lt_prog_compiler_static_CXX='-Bstatic'
-	    ;;
-	  cxx*)
-	    # Compaq C++
-	    # Make sure the PIC flag is empty.  It appears that all Alpha
-	    # Linux and Compaq Tru64 Unix objects are PIC.
-	    lt_prog_compiler_pic_CXX=
-	    lt_prog_compiler_static_CXX='-non_shared'
-	    ;;
-	  *)
-	    case `$CC -V 2>&1 | sed 5q` in
-	    *Sun\ C*)
-	      # Sun C++ 5.9
-	      lt_prog_compiler_pic_CXX='-KPIC'
-	      lt_prog_compiler_static_CXX='-Bstatic'
-	      lt_prog_compiler_wl_CXX='-Qoption ld '
-	      ;;
-	    esac
-	    ;;
-	esac
-	;;
-      lynxos*)
-	;;
-      m88k*)
-	;;
-      mvs*)
-	case $cc_basename in
-	  cxx*)
-	    lt_prog_compiler_pic_CXX='-W c,exportall'
-	    ;;
-	  *)
-	    ;;
-	esac
-	;;
-      netbsd*)
-	;;
-      osf3* | osf4* | osf5*)
-	case $cc_basename in
-	  KCC*)
-	    lt_prog_compiler_wl_CXX='--backend -Wl,'
-	    ;;
-	  RCC*)
-	    # Rational C++ 2.4.1
-	    lt_prog_compiler_pic_CXX='-pic'
-	    ;;
-	  cxx*)
-	    # Digital/Compaq C++
-	    lt_prog_compiler_wl_CXX='-Wl,'
-	    # Make sure the PIC flag is empty.  It appears that all Alpha
-	    # Linux and Compaq Tru64 Unix objects are PIC.
-	    lt_prog_compiler_pic_CXX=
-	    lt_prog_compiler_static_CXX='-non_shared'
-	    ;;
-	  *)
-	    ;;
-	esac
-	;;
-      psos*)
-	;;
-      solaris*)
-	case $cc_basename in
-	  CC*)
-	    # Sun C++ 4.2, 5.x and Centerline C++
-	    lt_prog_compiler_pic_CXX='-KPIC'
-	    lt_prog_compiler_static_CXX='-Bstatic'
-	    lt_prog_compiler_wl_CXX='-Qoption ld '
-	    ;;
-	  gcx*)
-	    # Green Hills C++ Compiler
-	    lt_prog_compiler_pic_CXX='-PIC'
-	    ;;
-	  *)
-	    ;;
-	esac
-	;;
-      sunos4*)
-	case $cc_basename in
-	  CC*)
-	    # Sun C++ 4.x
-	    lt_prog_compiler_pic_CXX='-pic'
-	    lt_prog_compiler_static_CXX='-Bstatic'
-	    ;;
-	  lcc*)
-	    # Lucid
-	    lt_prog_compiler_pic_CXX='-pic'
-	    ;;
-	  *)
-	    ;;
-	esac
-	;;
-      tandem*)
-	case $cc_basename in
-	  NCC*)
-	    # NonStop-UX NCC 3.20
-	    lt_prog_compiler_pic_CXX='-KPIC'
-	    ;;
-	  *)
-	    ;;
-	esac
-	;;
-      sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
-	case $cc_basename in
-	  CC*)
-	    lt_prog_compiler_wl_CXX='-Wl,'
-	    lt_prog_compiler_pic_CXX='-KPIC'
-	    lt_prog_compiler_static_CXX='-Bstatic'
-	    ;;
-	esac
-	;;
-      vxworks*)
-	;;
-      *)
-	lt_prog_compiler_can_build_shared_CXX=no
-	;;
-    esac
-  fi
 
-{ $as_echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_CXX" >&5
-$as_echo "$lt_prog_compiler_pic_CXX" >&6; }
 
-#
-# Check to make sure the PIC flag actually works.
-#
-if test -n "$lt_prog_compiler_pic_CXX"; then
 
-{ $as_echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic_CXX works" >&5
-$as_echo_n "checking if $compiler PIC flag $lt_prog_compiler_pic_CXX works... " >&6; }
-if test "${lt_cv_prog_compiler_pic_works_CXX+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
-  lt_cv_prog_compiler_pic_works_CXX=no
-  ac_outfile=conftest.$ac_objext
-   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
-   lt_compiler_flag="$lt_prog_compiler_pic_CXX -DPIC"
-   # Insert the option either (1) after the last *FLAGS variable, or
-   # (2) before a word containing "conftest.", or (3) at the end.
-   # Note that $ac_compile itself does not contain backslashes and begins
-   # with a dollar sign (not a hyphen), so the echo should work correctly.
-   # The option is referenced via a variable to avoid confusing sed.
-   lt_compile=`echo "$ac_compile" | $SED \
-   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-   -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:13564: $lt_compile\"" >&5)
-   (eval "$lt_compile" 2>conftest.err)
-   ac_status=$?
-   cat conftest.err >&5
-   echo "$as_me:13568: \$? = $ac_status" >&5
-   if (exit $ac_status) && test -s "$ac_outfile"; then
-     # The compiler can only warn and ignore the option if not recognized
-     # So say no if there are warnings other than the usual output.
-     $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
-     $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
-     if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
-       lt_cv_prog_compiler_pic_works_CXX=yes
-     fi
-   fi
-   $rm conftest*
 
-fi
-{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_pic_works_CXX" >&5
-$as_echo "$lt_cv_prog_compiler_pic_works_CXX" >&6; }
 
-if test x"$lt_cv_prog_compiler_pic_works_CXX" = xyes; then
-    case $lt_prog_compiler_pic_CXX in
-     "" | " "*) ;;
-     *) lt_prog_compiler_pic_CXX=" $lt_prog_compiler_pic_CXX" ;;
-     esac
-else
-    lt_prog_compiler_pic_CXX=
-     lt_prog_compiler_can_build_shared_CXX=no
-fi
 
-fi
-case $host_os in
-  # For platforms which do not support PIC, -DPIC is meaningless:
-  *djgpp*)
-    lt_prog_compiler_pic_CXX=
-    ;;
-  *)
-    lt_prog_compiler_pic_CXX="$lt_prog_compiler_pic_CXX -DPIC"
-    ;;
-esac
 
-#
-# Check to make sure the static flag actually works.
-#
-wl=$lt_prog_compiler_wl_CXX eval lt_tmp_static_flag=\"$lt_prog_compiler_static_CXX\"
-{ $as_echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5
-$as_echo_n "checking if $compiler static flag $lt_tmp_static_flag works... " >&6; }
-if test "${lt_cv_prog_compiler_static_works_CXX+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
-  lt_cv_prog_compiler_static_works_CXX=no
-   save_LDFLAGS="$LDFLAGS"
-   LDFLAGS="$LDFLAGS $lt_tmp_static_flag"
-   echo "$lt_simple_link_test_code" > conftest.$ac_ext
-   if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
-     # The linker can only warn and ignore the option if not recognized
-     # So say no if there are warnings
-     if test -s conftest.err; then
-       # Append any errors to the config.log.
-       cat conftest.err 1>&5
-       $echo "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp
-       $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
-       if diff conftest.exp conftest.er2 >/dev/null; then
-         lt_cv_prog_compiler_static_works_CXX=yes
-       fi
-     else
-       lt_cv_prog_compiler_static_works_CXX=yes
-     fi
-   fi
-   $rm -r conftest*
-   LDFLAGS="$save_LDFLAGS"
 
-fi
-{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_static_works_CXX" >&5
-$as_echo "$lt_cv_prog_compiler_static_works_CXX" >&6; }
 
-if test x"$lt_cv_prog_compiler_static_works_CXX" = xyes; then
-    :
-else
-    lt_prog_compiler_static_CXX=
-fi
 
 
-{ $as_echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5
-$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; }
-if test "${lt_cv_prog_compiler_c_o_CXX+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
-  lt_cv_prog_compiler_c_o_CXX=no
-   $rm -r conftest 2>/dev/null
-   mkdir conftest
-   cd conftest
-   mkdir out
-   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
 
-   lt_compiler_flag="-o out/conftest2.$ac_objext"
-   # Insert the option either (1) after the last *FLAGS variable, or
-   # (2) before a word containing "conftest.", or (3) at the end.
-   # Note that $ac_compile itself does not contain backslashes and begins
-   # with a dollar sign (not a hyphen), so the echo should work correctly.
-   lt_compile=`echo "$ac_compile" | $SED \
-   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-   -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:13668: $lt_compile\"" >&5)
-   (eval "$lt_compile" 2>out/conftest.err)
-   ac_status=$?
-   cat out/conftest.err >&5
-   echo "$as_me:13672: \$? = $ac_status" >&5
-   if (exit $ac_status) && test -s out/conftest2.$ac_objext
-   then
-     # The compiler can only warn and ignore the option if not recognized
-     # So say no if there are warnings
-     $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
-     $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
-     if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
-       lt_cv_prog_compiler_c_o_CXX=yes
-     fi
-   fi
-   chmod u+w . 2>&5
-   $rm conftest*
-   # SGI C++ compiler will create directory out/ii_files/ for
-   # template instantiation
-   test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files
-   $rm out/* && rmdir out
-   cd ..
-   rmdir conftest
-   $rm conftest*
 
-fi
-{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o_CXX" >&5
-$as_echo "$lt_cv_prog_compiler_c_o_CXX" >&6; }
 
 
-hard_links="nottested"
-if test "$lt_cv_prog_compiler_c_o_CXX" = no && test "$need_locks" != no; then
-  # do not overwrite the value of need_locks provided by the user
-  { $as_echo "$as_me:$LINENO: checking if we can lock with hard links" >&5
-$as_echo_n "checking if we can lock with hard links... " >&6; }
-  hard_links=yes
-  $rm conftest*
-  ln conftest.a conftest.b 2>/dev/null && hard_links=no
-  touch conftest.a
-  ln conftest.a conftest.b 2>&5 || hard_links=no
-  ln conftest.a conftest.b 2>/dev/null && hard_links=no
-  { $as_echo "$as_me:$LINENO: result: $hard_links" >&5
-$as_echo "$hard_links" >&6; }
-  if test "$hard_links" = no; then
-    { $as_echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5
-$as_echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;}
-    need_locks=warn
-  fi
-else
-  need_locks=no
-fi
 
-{ $as_echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5
-$as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; }
 
-  export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
-  case $host_os in
-  aix[4-9]*)
-    # If we're using GNU nm, then we don't want the "-C" option.
-    # -C means demangle to AIX nm, but means don't demangle with GNU nm
-    if $NM -V 2>&1 | grep 'GNU' > /dev/null; then
-      export_symbols_cmds_CXX='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols'
-    else
-      export_symbols_cmds_CXX='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols'
-    fi
-    ;;
-  pw32*)
-    export_symbols_cmds_CXX="$ltdll_cmds"
-  ;;
-  cygwin* | mingw*)
-    export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/;/^.*[ ]__nm__/s/^.*[ ]__nm__\([^ ]*\)[ ][^ ]*/\1 DATA/;/^I[ ]/d;/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols'
-  ;;
-  linux* | k*bsd*-gnu)
-    link_all_deplibs_CXX=no
-  ;;
-  *)
-    export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
-  ;;
-  esac
-  exclude_expsyms_CXX='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'
 
-{ $as_echo "$as_me:$LINENO: result: $ld_shlibs_CXX" >&5
-$as_echo "$ld_shlibs_CXX" >&6; }
-test "$ld_shlibs_CXX" = no && can_build_shared=no
 
-#
-# Do we need to explicitly link libc?
-#
-case "x$archive_cmds_need_lc_CXX" in
-x|xyes)
-  # Assume -lc should be added
-  archive_cmds_need_lc_CXX=yes
 
-  if test "$enable_shared" = yes && test "$GCC" = yes; then
-    case $archive_cmds_CXX in
-    *'~'*)
-      # FIXME: we may have to deal with multi-command sequences.
-      ;;
-    '$CC '*)
-      # Test whether the compiler implicitly links with -lc since on some
-      # systems, -lgcc has to come before -lc. If gcc already passes -lc
-      # to ld, don't add -lc before -lgcc.
-      { $as_echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5
-$as_echo_n "checking whether -lc should be explicitly linked in... " >&6; }
-      $rm conftest*
-      echo "$lt_simple_compile_test_code" > conftest.$ac_ext
 
-      if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } 2>conftest.err; then
-        soname=conftest
-        lib=conftest
-        libobjs=conftest.$ac_objext
-        deplibs=
-        wl=$lt_prog_compiler_wl_CXX
-	pic_flag=$lt_prog_compiler_pic_CXX
-        compiler_flags=-v
-        linker_flags=-v
-        verstring=
-        output_objdir=.
-        libname=conftest
-        lt_save_allow_undefined_flag=$allow_undefined_flag_CXX
-        allow_undefined_flag_CXX=
-        if { (eval echo "$as_me:$LINENO: \"$archive_cmds_CXX 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1\"") >&5
-  (eval $archive_cmds_CXX 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) 2>&5
-  ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }
-        then
-	  archive_cmds_need_lc_CXX=no
-        else
-	  archive_cmds_need_lc_CXX=yes
-        fi
-        allow_undefined_flag_CXX=$lt_save_allow_undefined_flag
-      else
-        cat conftest.err 1>&5
-      fi
-      $rm conftest*
-      { $as_echo "$as_me:$LINENO: result: $archive_cmds_need_lc_CXX" >&5
-$as_echo "$archive_cmds_need_lc_CXX" >&6; }
-      ;;
-    esac
-  fi
-  ;;
-esac
 
-{ $as_echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5
-$as_echo_n "checking dynamic linker characteristics... " >&6; }
-library_names_spec=
-libname_spec='lib$name'
-soname_spec=
-shrext_cmds=".so"
-postinstall_cmds=
-postuninstall_cmds=
-finish_cmds=
-finish_eval=
-shlibpath_var=
-shlibpath_overrides_runpath=unknown
-version_type=none
-dynamic_linker="$host_os ld.so"
-sys_lib_dlsearch_path_spec="/lib /usr/lib"
 
-need_lib_prefix=unknown
-hardcode_into_libs=no
 
-# when you set need_version to no, make sure it does not cause -set_version
-# flags to be left without arguments
-need_version=unknown
 
-case $host_os in
-aix3*)
-  version_type=linux
-  library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
-  shlibpath_var=LIBPATH
 
-  # AIX 3 has no versioning support, so we append a major version to the name.
-  soname_spec='${libname}${release}${shared_ext}$major'
-  ;;
 
-aix[4-9]*)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  hardcode_into_libs=yes
-  if test "$host_cpu" = ia64; then
-    # AIX 5 supports IA64
-    library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
-    shlibpath_var=LD_LIBRARY_PATH
-  else
-    # With GCC up to 2.95.x, collect2 would create an import file
-    # for dependence libraries.  The import file would start with
-    # the line `#! .'.  This would cause the generated library to
-    # depend on `.', always an invalid library.  This was fixed in
-    # development snapshots of GCC prior to 3.0.
-    case $host_os in
-      aix4 | aix4.[01] | aix4.[01].*)
-      if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
-	   echo ' yes '
-	   echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then
-	:
-      else
-	can_build_shared=no
-      fi
-      ;;
-    esac
-    # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
-    # soname into executable. Probably we can add versioning support to
-    # collect2, so additional links can be useful in future.
-    if test "$aix_use_runtimelinking" = yes; then
-      # If using run time linking (on AIX 4.2 or later) use lib<name>.so
-      # instead of lib<name>.a to let people know that these are not
-      # typical AIX shared libraries.
-      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-    else
-      # We preserve .a as extension for shared libraries through AIX4.2
-      # and later when we are not doing run time linking.
-      library_names_spec='${libname}${release}.a $libname.a'
-      soname_spec='${libname}${release}${shared_ext}$major'
-    fi
-    shlibpath_var=LIBPATH
-  fi
-  ;;
 
-amigaos*)
-  library_names_spec='$libname.ixlibrary $libname.a'
-  # Create ${libname}_ixlibrary.a entries in /sys/libs.
-  finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
-  ;;
 
-beos*)
-  library_names_spec='${libname}${shared_ext}'
-  dynamic_linker="$host_os ld.so"
-  shlibpath_var=LIBRARY_PATH
-  ;;
 
-bsdi[45]*)
-  version_type=linux
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
-  shlibpath_var=LD_LIBRARY_PATH
-  sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
-  sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
-  # the default ld.so.conf also contains /usr/contrib/lib and
-  # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
-  # libtool to hard-code these into programs
-  ;;
 
-cygwin* | mingw* | pw32*)
-  version_type=windows
-  shrext_cmds=".dll"
-  need_version=no
-  need_lib_prefix=no
 
-  case $GCC,$host_os in
-  yes,cygwin* | yes,mingw* | yes,pw32*)
-    library_names_spec='$libname.dll.a'
-    # DLL is installed to $(libdir)/../bin by postinstall_cmds
-    postinstall_cmds='base_file=`basename \${file}`~
-      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~
-      dldir=$destdir/`dirname \$dlpath`~
-      test -d \$dldir || mkdir -p \$dldir~
-      $install_prog $dir/$dlname \$dldir/$dlname~
-      chmod a+x \$dldir/$dlname'
-    postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
-      dlpath=$dir/\$dldll~
-       $rm \$dlpath'
-    shlibpath_overrides_runpath=yes
 
-    case $host_os in
-    cygwin*)
-      # Cygwin DLLs use 'cyg' prefix rather than 'lib'
-      soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
-      sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib"
-      ;;
-    mingw*)
-      # MinGW DLLs use traditional 'lib' prefix
-      soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
-      sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
-      if echo "$sys_lib_search_path_spec" | grep ';[c-zC-Z]:/' >/dev/null; then
-        # It is most probably a Windows format PATH printed by
-        # mingw gcc, but we are running on Cygwin. Gcc prints its search
-        # path with ; separators, and with drive letters. We can handle the
-        # drive letters (cygwin fileutils understands them), so leave them,
-        # especially as we might pass files found there to a mingw objdump,
-        # which wouldn't understand a cygwinified path. Ahh.
-        sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
-      else
-        sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED  -e "s/$PATH_SEPARATOR/ /g"`
-      fi
-      ;;
-    pw32*)
-      # pw32 DLLs use 'pw' prefix rather than 'lib'
-      library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
-      ;;
-    esac
-    ;;
 
-  *)
-    library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib'
-    ;;
-  esac
-  dynamic_linker='Win32 ld.exe'
-  # FIXME: first we should search . and the directory the executable is in
-  shlibpath_var=PATH
-  ;;
 
-darwin* | rhapsody*)
-  dynamic_linker="$host_os dyld"
-  version_type=darwin
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext'
-  soname_spec='${libname}${release}${major}$shared_ext'
-  shlibpath_overrides_runpath=yes
-  shlibpath_var=DYLD_LIBRARY_PATH
-  shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
 
-  sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
-  ;;
 
-dgux*)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  ;;
 
-freebsd1*)
-  dynamic_linker=no
-  ;;
 
-freebsd* | dragonfly*)
-  # DragonFly does not have aout.  When/if they implement a new
-  # versioning mechanism, adjust this.
-  if test -x /usr/bin/objformat; then
-    objformat=`/usr/bin/objformat`
-  else
-    case $host_os in
-    freebsd[123]*) objformat=aout ;;
-    *) objformat=elf ;;
-    esac
-  fi
-  version_type=freebsd-$objformat
-  case $version_type in
-    freebsd-elf*)
-      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
-      need_version=no
-      need_lib_prefix=no
-      ;;
-    freebsd-*)
-      library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
-      need_version=yes
-      ;;
-  esac
-  shlibpath_var=LD_LIBRARY_PATH
-  case $host_os in
-  freebsd2*)
-    shlibpath_overrides_runpath=yes
-    ;;
-  freebsd3.[01]* | freebsdelf3.[01]*)
-    shlibpath_overrides_runpath=yes
-    hardcode_into_libs=yes
-    ;;
-  freebsd3.[2-9]* | freebsdelf3.[2-9]* | \
-  freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1)
-    shlibpath_overrides_runpath=no
-    hardcode_into_libs=yes
-    ;;
-  *) # from 4.6 on, and DragonFly
-    shlibpath_overrides_runpath=yes
-    hardcode_into_libs=yes
-    ;;
-  esac
-  ;;
 
-gnu*)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  hardcode_into_libs=yes
-  ;;
 
-hpux9* | hpux10* | hpux11*)
-  # Give a soname corresponding to the major version so that dld.sl refuses to
-  # link against other versions.
-  version_type=sunos
-  need_lib_prefix=no
-  need_version=no
-  case $host_cpu in
-  ia64*)
-    shrext_cmds='.so'
-    hardcode_into_libs=yes
-    dynamic_linker="$host_os dld.so"
-    shlibpath_var=LD_LIBRARY_PATH
-    shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
-    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-    soname_spec='${libname}${release}${shared_ext}$major'
-    if test "X$HPUX_IA64_MODE" = X32; then
-      sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
-    else
-      sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
-    fi
-    sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
-    ;;
-   hppa*64*)
-     shrext_cmds='.sl'
-     hardcode_into_libs=yes
-     dynamic_linker="$host_os dld.sl"
-     shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
-     shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
-     library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-     soname_spec='${libname}${release}${shared_ext}$major'
-     sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
-     sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
-     ;;
-   *)
-    shrext_cmds='.sl'
-    dynamic_linker="$host_os dld.sl"
-    shlibpath_var=SHLIB_PATH
-    shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
-    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-    soname_spec='${libname}${release}${shared_ext}$major'
-    ;;
-  esac
-  # HP-UX runs *really* slowly unless shared libraries are mode 555.
-  postinstall_cmds='chmod 555 $lib'
-  ;;
 
-interix[3-9]*)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=no
-  hardcode_into_libs=yes
-  ;;
 
-irix5* | irix6* | nonstopux*)
-  case $host_os in
-    nonstopux*) version_type=nonstopux ;;
-    *)
-	if test "$lt_cv_prog_gnu_ld" = yes; then
-		version_type=linux
-	else
-		version_type=irix
-	fi ;;
-  esac
-  need_lib_prefix=no
-  need_version=no
-  soname_spec='${libname}${release}${shared_ext}$major'
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
-  case $host_os in
-  irix5* | nonstopux*)
-    libsuff= shlibsuff=
-    ;;
-  *)
-    case $LD in # libtool.m4 will add one of these switches to LD
-    *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
-      libsuff= shlibsuff= libmagic=32-bit;;
-    *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
-      libsuff=32 shlibsuff=N32 libmagic=N32;;
-    *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
-      libsuff=64 shlibsuff=64 libmagic=64-bit;;
-    *) libsuff= shlibsuff= libmagic=never-match;;
-    esac
-    ;;
-  esac
-  shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
-  shlibpath_overrides_runpath=no
-  sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
-  sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
-  hardcode_into_libs=yes
-  ;;
 
-# No shared lib support for Linux oldld, aout, or coff.
-linux*oldld* | linux*aout* | linux*coff*)
-  dynamic_linker=no
-  ;;
 
-# This must be Linux ELF.
-linux* | k*bsd*-gnu)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=no
-  # This implies no fast_install, which is unacceptable.
-  # Some rework will be needed to allow for fast_install
-  # before this can be enabled.
-  hardcode_into_libs=yes
 
-  # find out which ABI we are using
-  libsuff=
-  case "$host_cpu" in
-  x86_64*|s390x*|powerpc64*)
-    echo '#line 14178 "configure"' > conftest.$ac_ext
-    if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; then
-      case `/usr/bin/file conftest.$ac_objext` in
-      *64-bit*)
-        libsuff=64
-        ;;
-      esac
-    fi
-    rm -rf conftest*
-    ;;
-  esac
 
-  sys_lib_dlsearch_path_spec="/lib${libsuff} /usr/lib${libsuff}"
 
-  # Append ld.so.conf contents to the search path
-  if test -f /etc/ld.so.conf; then
-    lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ 	]*hwcap[ 	]/d;s/[:,	]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
-    sys_lib_dlsearch_path_spec="$sys_lib_dlsearch_path_spec $lt_ld_extra"
-  fi
 
-  # We used to test for /lib/ld.so.1 and disable shared libraries on
-  # powerpc, because MkLinux only supported shared libraries with the
-  # GNU dynamic linker.  Since this was broken with cross compilers,
-  # most powerpc-linux boxes support dynamic linking these days and
-  # people can always --disable-shared, the test was removed, and we
-  # assume the GNU/Linux dynamic linker is in use.
-  dynamic_linker='GNU/Linux ld.so'
-  ;;
 
-netbsd*)
-  version_type=sunos
-  need_lib_prefix=no
-  need_version=no
-  if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
-    finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
-    dynamic_linker='NetBSD (a.out) ld.so'
-  else
-    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
-    soname_spec='${libname}${release}${shared_ext}$major'
-    dynamic_linker='NetBSD ld.elf_so'
-  fi
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
-  hardcode_into_libs=yes
-  ;;
 
-newsos6)
-  version_type=linux
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
-  ;;
 
-nto-qnx*)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
-  ;;
 
-openbsd*)
-  version_type=sunos
-  sys_lib_dlsearch_path_spec="/usr/lib"
-  need_lib_prefix=no
-  # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
-  case $host_os in
-    openbsd3.3 | openbsd3.3.*) need_version=yes ;;
-    *)                         need_version=no  ;;
-  esac
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
-  finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
-  shlibpath_var=LD_LIBRARY_PATH
-  if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-    case $host_os in
-      openbsd2.[89] | openbsd2.[89].*)
-	shlibpath_overrides_runpath=no
-	;;
-      *)
-	shlibpath_overrides_runpath=yes
-	;;
-      esac
-  else
-    shlibpath_overrides_runpath=yes
-  fi
-  ;;
 
-os2*)
-  libname_spec='$name'
-  shrext_cmds=".dll"
-  need_lib_prefix=no
-  library_names_spec='$libname${shared_ext} $libname.a'
-  dynamic_linker='OS/2 ld.exe'
-  shlibpath_var=LIBPATH
-  ;;
 
-osf3* | osf4* | osf5*)
-  version_type=osf
-  need_lib_prefix=no
-  need_version=no
-  soname_spec='${libname}${release}${shared_ext}$major'
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  shlibpath_var=LD_LIBRARY_PATH
-  sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
-  sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
-  ;;
 
-rdos*)
-  dynamic_linker=no
-  ;;
 
-solaris*)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
-  hardcode_into_libs=yes
-  # ldd complains unless libraries are executable
-  postinstall_cmds='chmod +x $lib'
-  ;;
 
-sunos4*)
-  version_type=sunos
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
-  finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
-  if test "$with_gnu_ld" = yes; then
-    need_lib_prefix=no
-  fi
-  need_version=yes
-  ;;
 
-sysv4 | sysv4.3*)
-  version_type=linux
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  case $host_vendor in
-    sni)
-      shlibpath_overrides_runpath=no
-      need_lib_prefix=no
-      export_dynamic_flag_spec='${wl}-Blargedynsym'
-      runpath_var=LD_RUN_PATH
-      ;;
-    siemens)
-      need_lib_prefix=no
-      ;;
-    motorola)
-      need_lib_prefix=no
-      need_version=no
-      shlibpath_overrides_runpath=no
-      sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
-      ;;
-  esac
-  ;;
 
-sysv4*MP*)
-  if test -d /usr/nec ;then
-    version_type=linux
-    library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
-    soname_spec='$libname${shared_ext}.$major'
-    shlibpath_var=LD_LIBRARY_PATH
-  fi
-  ;;
 
-sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
-  version_type=freebsd-elf
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  hardcode_into_libs=yes
-  if test "$with_gnu_ld" = yes; then
-    sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
-    shlibpath_overrides_runpath=no
-  else
-    sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
-    shlibpath_overrides_runpath=yes
-    case $host_os in
-      sco3.2v5*)
-        sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
-	;;
-    esac
-  fi
-  sys_lib_dlsearch_path_spec='/usr/lib'
-  ;;
 
-uts4*)
-  version_type=linux
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  ;;
 
-*)
-  dynamic_linker=no
-  ;;
-esac
-{ $as_echo "$as_me:$LINENO: result: $dynamic_linker" >&5
-$as_echo "$dynamic_linker" >&6; }
-test "$dynamic_linker" = no && can_build_shared=no
 
-if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
-  lt_cv_sys_lib_search_path_spec="$sys_lib_search_path_spec"
-fi
 
-sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec"
-if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
-  lt_cv_sys_lib_dlsearch_path_spec="$sys_lib_dlsearch_path_spec"
-fi
 
-sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec"
 
-variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
-if test "$GCC" = yes; then
-  variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
-fi
 
-{ $as_echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5
-$as_echo_n "checking how to hardcode library paths into programs... " >&6; }
-hardcode_action_CXX=
-if test -n "$hardcode_libdir_flag_spec_CXX" || \
-   test -n "$runpath_var_CXX" || \
-   test "X$hardcode_automatic_CXX" = "Xyes" ; then
 
-  # We can hardcode non-existant directories.
-  if test "$hardcode_direct_CXX" != no &&
-     # If the only mechanism to avoid hardcoding is shlibpath_var, we
-     # have to relink, otherwise we might link with an installed library
-     # when we should be linking with a yet-to-be-installed one
-     ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, CXX)" != no &&
-     test "$hardcode_minus_L_CXX" != no; then
-    # Linking always hardcodes the temporary library directory.
-    hardcode_action_CXX=relink
-  else
-    # We can link without hardcoding, and we can hardcode nonexisting dirs.
-    hardcode_action_CXX=immediate
-  fi
-else
-  # We cannot hardcode anything, or else we can only hardcode existing
-  # directories.
-  hardcode_action_CXX=unsupported
-fi
-{ $as_echo "$as_me:$LINENO: result: $hardcode_action_CXX" >&5
-$as_echo "$hardcode_action_CXX" >&6; }
 
-if test "$hardcode_action_CXX" = relink; then
-  # Fast installation is not supported
-  enable_fast_install=no
-elif test "$shlibpath_overrides_runpath" = yes ||
-     test "$enable_shared" = no; then
-  # Fast installation is not necessary
-  enable_fast_install=needless
-fi
 
 
-# The else clause should only fire when bootstrapping the
-# libtool distribution, otherwise you forgot to ship ltmain.sh
-# with your package, and you will get complaints that there are
-# no rules to generate ltmain.sh.
-if test -f "$ltmain"; then
-  # See if we are running on zsh, and set the options which allow our commands through
-  # without removal of \ escapes.
-  if test -n "${ZSH_VERSION+set}" ; then
-    setopt NO_GLOB_SUBST
-  fi
-  # Now quote all the things that may contain metacharacters while being
-  # careful not to overquote the AC_SUBSTed values.  We take copies of the
-  # variables and quote the copies for generation of the libtool script.
-  for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \
-    SED SHELL STRIP \
-    libname_spec library_names_spec soname_spec extract_expsyms_cmds \
-    old_striplib striplib file_magic_cmd finish_cmds finish_eval \
-    deplibs_check_method reload_flag reload_cmds need_locks \
-    lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \
-    lt_cv_sys_global_symbol_to_c_name_address \
-    sys_lib_search_path_spec sys_lib_dlsearch_path_spec \
-    old_postinstall_cmds old_postuninstall_cmds \
-    compiler_CXX \
-    CC_CXX \
-    LD_CXX \
-    lt_prog_compiler_wl_CXX \
-    lt_prog_compiler_pic_CXX \
-    lt_prog_compiler_static_CXX \
-    lt_prog_compiler_no_builtin_flag_CXX \
-    export_dynamic_flag_spec_CXX \
-    thread_safe_flag_spec_CXX \
-    whole_archive_flag_spec_CXX \
-    enable_shared_with_static_runtimes_CXX \
-    old_archive_cmds_CXX \
-    old_archive_from_new_cmds_CXX \
-    predep_objects_CXX \
-    postdep_objects_CXX \
-    predeps_CXX \
-    postdeps_CXX \
-    compiler_lib_search_path_CXX \
-    compiler_lib_search_dirs_CXX \
-    archive_cmds_CXX \
-    archive_expsym_cmds_CXX \
-    postinstall_cmds_CXX \
-    postuninstall_cmds_CXX \
-    old_archive_from_expsyms_cmds_CXX \
-    allow_undefined_flag_CXX \
-    no_undefined_flag_CXX \
-    export_symbols_cmds_CXX \
-    hardcode_libdir_flag_spec_CXX \
-    hardcode_libdir_flag_spec_ld_CXX \
-    hardcode_libdir_separator_CXX \
-    hardcode_automatic_CXX \
-    module_cmds_CXX \
-    module_expsym_cmds_CXX \
-    lt_cv_prog_compiler_c_o_CXX \
-    fix_srcfile_path_CXX \
-    exclude_expsyms_CXX \
-    include_expsyms_CXX; do
-
-    case $var in
-    old_archive_cmds_CXX | \
-    old_archive_from_new_cmds_CXX | \
-    archive_cmds_CXX | \
-    archive_expsym_cmds_CXX | \
-    module_cmds_CXX | \
-    module_expsym_cmds_CXX | \
-    old_archive_from_expsyms_cmds_CXX | \
-    export_symbols_cmds_CXX | \
-    extract_expsyms_cmds | reload_cmds | finish_cmds | \
-    postinstall_cmds | postuninstall_cmds | \
-    old_postinstall_cmds | old_postuninstall_cmds | \
-    sys_lib_search_path_spec | sys_lib_dlsearch_path_spec)
-      # Double-quote double-evaled strings.
-      eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\""
-      ;;
-    *)
-      eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\""
-      ;;
-    esac
-  done
 
-  case $lt_echo in
-  *'\$0 --fallback-echo"')
-    lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'`
-    ;;
-  esac
 
-cfgfile="$ofile"
 
-  cat <<__EOF__ >> "$cfgfile"
-# ### BEGIN LIBTOOL TAG CONFIG: $tagname
 
-# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
 
-# Shell to use when invoking shell scripts.
-SHELL=$lt_SHELL
 
-# Whether or not to build shared libraries.
-build_libtool_libs=$enable_shared
 
-# Whether or not to build static libraries.
-build_old_libs=$enable_static
 
-# Whether or not to add -lc for building shared libraries.
-build_libtool_need_lc=$archive_cmds_need_lc_CXX
 
-# Whether or not to disallow shared libs when runtime libs are static
-allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes_CXX
 
-# Whether or not to optimize for fast installation.
-fast_install=$enable_fast_install
 
-# The host system.
-host_alias=$host_alias
-host=$host
-host_os=$host_os
 
-# The build system.
-build_alias=$build_alias
-build=$build
-build_os=$build_os
 
-# An echo program that does not interpret backslashes.
-echo=$lt_echo
 
-# The archiver.
-AR=$lt_AR
-AR_FLAGS=$lt_AR_FLAGS
 
-# A C compiler.
-LTCC=$lt_LTCC
 
-# LTCC compiler flags.
-LTCFLAGS=$lt_LTCFLAGS
 
-# A language-specific compiler.
-CC=$lt_compiler_CXX
 
-# Is the compiler the GNU C compiler?
-with_gcc=$GCC_CXX
 
-# An ERE matcher.
-EGREP=$lt_EGREP
 
-# The linker used to build libraries.
-LD=$lt_LD_CXX
 
-# Whether we need hard or soft links.
-LN_S=$lt_LN_S
 
-# A BSD-compatible nm program.
-NM=$lt_NM
 
-# A symbol stripping program
-STRIP=$lt_STRIP
 
-# Used to examine libraries when file_magic_cmd begins "file"
-MAGIC_CMD=$MAGIC_CMD
 
-# Used on cygwin: DLL creation program.
-DLLTOOL="$DLLTOOL"
 
-# Used on cygwin: object dumper.
-OBJDUMP="$OBJDUMP"
 
-# Used on cygwin: assembler.
-AS="$AS"
 
-# The name of the directory that contains temporary libtool files.
-objdir=$objdir
 
-# How to create reloadable object files.
-reload_flag=$lt_reload_flag
-reload_cmds=$lt_reload_cmds
 
-# How to pass a linker flag through the compiler.
-wl=$lt_lt_prog_compiler_wl_CXX
 
-# Object file suffix (normally "o").
-objext="$ac_objext"
 
-# Old archive suffix (normally "a").
-libext="$libext"
 
-# Shared library suffix (normally ".so").
-shrext_cmds='$shrext_cmds'
 
-# Executable file suffix (normally "").
-exeext="$exeext"
 
-# Additional compiler flags for building library objects.
-pic_flag=$lt_lt_prog_compiler_pic_CXX
-pic_mode=$pic_mode
 
-# What is the maximum length of a command?
-max_cmd_len=$lt_cv_sys_max_cmd_len
 
-# Does compiler simultaneously support -c and -o options?
-compiler_c_o=$lt_lt_cv_prog_compiler_c_o_CXX
 
-# Must we lock files when doing compilation?
-need_locks=$lt_need_locks
 
-# Do we need the lib prefix for modules?
-need_lib_prefix=$need_lib_prefix
 
-# Do we need a version for libraries?
-need_version=$need_version
 
-# Whether dlopen is supported.
-dlopen_support=$enable_dlopen
 
-# Whether dlopen of programs is supported.
-dlopen_self=$enable_dlopen_self
 
-# Whether dlopen of statically linked programs is supported.
-dlopen_self_static=$enable_dlopen_self_static
 
-# Compiler flag to prevent dynamic linking.
-link_static_flag=$lt_lt_prog_compiler_static_CXX
 
-# Compiler flag to turn off builtin functions.
-no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_CXX
 
-# Compiler flag to allow reflexive dlopens.
-export_dynamic_flag_spec=$lt_export_dynamic_flag_spec_CXX
 
-# Compiler flag to generate shared objects directly from archives.
-whole_archive_flag_spec=$lt_whole_archive_flag_spec_CXX
 
-# Compiler flag to generate thread-safe objects.
-thread_safe_flag_spec=$lt_thread_safe_flag_spec_CXX
 
-# Library versioning type.
-version_type=$version_type
 
-# Format of library name prefix.
-libname_spec=$lt_libname_spec
 
-# List of archive names.  First name is the real one, the rest are links.
-# The last name is the one that the linker finds with -lNAME.
-library_names_spec=$lt_library_names_spec
 
-# The coded name of the library, if different from the real name.
-soname_spec=$lt_soname_spec
 
-# Commands used to build and install an old-style archive.
-RANLIB=$lt_RANLIB
-old_archive_cmds=$lt_old_archive_cmds_CXX
-old_postinstall_cmds=$lt_old_postinstall_cmds
-old_postuninstall_cmds=$lt_old_postuninstall_cmds
 
-# Create an old-style archive from a shared archive.
-old_archive_from_new_cmds=$lt_old_archive_from_new_cmds_CXX
 
-# Create a temporary old-style archive to link instead of a shared archive.
-old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds_CXX
 
-# Commands used to build and install a shared archive.
-archive_cmds=$lt_archive_cmds_CXX
-archive_expsym_cmds=$lt_archive_expsym_cmds_CXX
-postinstall_cmds=$lt_postinstall_cmds
-postuninstall_cmds=$lt_postuninstall_cmds
 
-# Commands used to build a loadable module (assumed same as above if empty)
-module_cmds=$lt_module_cmds_CXX
-module_expsym_cmds=$lt_module_expsym_cmds_CXX
 
-# Commands to strip libraries.
-old_striplib=$lt_old_striplib
-striplib=$lt_striplib
 
-# Dependencies to place before the objects being linked to create a
-# shared library.
-predep_objects=$lt_predep_objects_CXX
 
-# Dependencies to place after the objects being linked to create a
-# shared library.
-postdep_objects=$lt_postdep_objects_CXX
 
-# Dependencies to place before the objects being linked to create a
-# shared library.
-predeps=$lt_predeps_CXX
 
-# Dependencies to place after the objects being linked to create a
-# shared library.
-postdeps=$lt_postdeps_CXX
 
-# The directories searched by this compiler when creating a shared
-# library
-compiler_lib_search_dirs=$lt_compiler_lib_search_dirs_CXX
 
-# The library search path used internally by the compiler when linking
-# a shared library.
-compiler_lib_search_path=$lt_compiler_lib_search_path_CXX
 
-# Method to check whether dependent libraries are shared objects.
-deplibs_check_method=$lt_deplibs_check_method
 
-# Command to use when deplibs_check_method == file_magic.
-file_magic_cmd=$lt_file_magic_cmd
 
-# Flag that allows shared libraries with undefined symbols to be built.
-allow_undefined_flag=$lt_allow_undefined_flag_CXX
 
-# Flag that forces no undefined symbols.
-no_undefined_flag=$lt_no_undefined_flag_CXX
 
-# Commands used to finish a libtool library installation in a directory.
-finish_cmds=$lt_finish_cmds
 
-# Same as above, but a single script fragment to be evaled but not shown.
-finish_eval=$lt_finish_eval
 
-# Take the output of nm and produce a listing of raw symbols and C names.
-global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe
 
-# Transform the output of nm in a proper C declaration
-global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl
 
-# Transform the output of nm in a C name address pair
-global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
 
-# This is the shared library runtime path variable.
-runpath_var=$runpath_var
 
-# This is the shared library path variable.
-shlibpath_var=$shlibpath_var
 
-# Is shlibpath searched before the hard-coded library search path?
-shlibpath_overrides_runpath=$shlibpath_overrides_runpath
 
-# How to hardcode a shared library path into an executable.
-hardcode_action=$hardcode_action_CXX
 
-# Whether we should hardcode library paths into libraries.
-hardcode_into_libs=$hardcode_into_libs
 
-# Flag to hardcode \$libdir into a binary during linking.
-# This must work even if \$libdir does not exist.
-hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_CXX
-
-# If ld is used when linking, flag to hardcode \$libdir into
-# a binary during linking. This must work even if \$libdir does
-# not exist.
-hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_CXX
-
-# Whether we need a single -rpath flag with a separated argument.
-hardcode_libdir_separator=$lt_hardcode_libdir_separator_CXX
 
-# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the
-# resulting binary.
-hardcode_direct=$hardcode_direct_CXX
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking dynamic linker characteristics" >&5
+$as_echo_n "checking dynamic linker characteristics... " >&6; }
 
-# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
-# resulting binary.
-hardcode_minus_L=$hardcode_minus_L_CXX
+if test "$GCC" = yes; then
+  case $host_os in
+    darwin*) lt_awk_arg="/^libraries:/,/LR/" ;;
+    *) lt_awk_arg="/^libraries:/" ;;
+  esac
+  lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e "s,=/,/,g"`
+  if $ECHO "$lt_search_path_spec" | $GREP ';' >/dev/null ; then
+    # if the path contains ";" then we assume it to be the separator
+    # otherwise default to the standard path separator (i.e. ":") - it is
+    # assumed that no part of a normal pathname contains ";" but that should
+    # okay in the real world where ";" in dirpaths is itself problematic.
+    lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED -e 's/;/ /g'`
+  else
+    lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED  -e "s/$PATH_SEPARATOR/ /g"`
+  fi
+  # Ok, now we have the path, separated by spaces, we can step through it
+  # and add multilib dir if necessary.
+  lt_tmp_lt_search_path_spec=
+  lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null`
+  for lt_sys_path in $lt_search_path_spec; do
+    if test -d "$lt_sys_path/$lt_multi_os_dir"; then
+      lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir"
+    else
+      test -d "$lt_sys_path" && \
+	lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path"
+    fi
+  done
+  lt_search_path_spec=`$ECHO $lt_tmp_lt_search_path_spec | awk '
+BEGIN {RS=" "; FS="/|\n";} {
+  lt_foo="";
+  lt_count=0;
+  for (lt_i = NF; lt_i > 0; lt_i--) {
+    if ($lt_i != "" && $lt_i != ".") {
+      if ($lt_i == "..") {
+        lt_count++;
+      } else {
+        if (lt_count == 0) {
+          lt_foo="/" $lt_i lt_foo;
+        } else {
+          lt_count--;
+        }
+      }
+    }
+  }
+  if (lt_foo != "") { lt_freq[lt_foo]++; }
+  if (lt_freq[lt_foo] == 1) { print lt_foo; }
+}'`
+  sys_lib_search_path_spec=`$ECHO $lt_search_path_spec`
+else
+  sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
+fi
+library_names_spec=
+libname_spec='lib$name'
+soname_spec=
+shrext_cmds=".so"
+postinstall_cmds=
+postuninstall_cmds=
+finish_cmds=
+finish_eval=
+shlibpath_var=
+shlibpath_overrides_runpath=unknown
+version_type=none
+dynamic_linker="$host_os ld.so"
+sys_lib_dlsearch_path_spec="/lib /usr/lib"
+need_lib_prefix=unknown
+hardcode_into_libs=no
 
-# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into
-# the resulting binary.
-hardcode_shlibpath_var=$hardcode_shlibpath_var_CXX
+# when you set need_version to no, make sure it does not cause -set_version
+# flags to be left without arguments
+need_version=unknown
 
-# Set to yes if building a shared library automatically hardcodes DIR into the library
-# and all subsequent libraries and executables linked against it.
-hardcode_automatic=$hardcode_automatic_CXX
+case $host_os in
+aix3*)
+  version_type=linux
+  library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
+  shlibpath_var=LIBPATH
 
-# Variables whose values should be saved in libtool wrapper scripts and
-# restored at relink time.
-variables_saved_for_relink="$variables_saved_for_relink"
+  # AIX 3 has no versioning support, so we append a major version to the name.
+  soname_spec='${libname}${release}${shared_ext}$major'
+  ;;
 
-# Whether libtool must link a program against all its dependency libraries.
-link_all_deplibs=$link_all_deplibs_CXX
+aix[4-9]*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  hardcode_into_libs=yes
+  if test "$host_cpu" = ia64; then
+    # AIX 5 supports IA64
+    library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
+    shlibpath_var=LD_LIBRARY_PATH
+  else
+    # With GCC up to 2.95.x, collect2 would create an import file
+    # for dependence libraries.  The import file would start with
+    # the line `#! .'.  This would cause the generated library to
+    # depend on `.', always an invalid library.  This was fixed in
+    # development snapshots of GCC prior to 3.0.
+    case $host_os in
+      aix4 | aix4.[01] | aix4.[01].*)
+      if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
+	   echo ' yes '
+	   echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then
+	:
+      else
+	can_build_shared=no
+      fi
+      ;;
+    esac
+    # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
+    # soname into executable. Probably we can add versioning support to
+    # collect2, so additional links can be useful in future.
+    if test "$aix_use_runtimelinking" = yes; then
+      # If using run time linking (on AIX 4.2 or later) use lib<name>.so
+      # instead of lib<name>.a to let people know that these are not
+      # typical AIX shared libraries.
+      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    else
+      # We preserve .a as extension for shared libraries through AIX4.2
+      # and later when we are not doing run time linking.
+      library_names_spec='${libname}${release}.a $libname.a'
+      soname_spec='${libname}${release}${shared_ext}$major'
+    fi
+    shlibpath_var=LIBPATH
+  fi
+  ;;
 
-# Compile-time system search path for libraries
-sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
+amigaos*)
+  case $host_cpu in
+  powerpc)
+    # Since July 2007 AmigaOS4 officially supports .so libraries.
+    # When compiling the executable, add -use-dynld -Lsobjs: to the compileline.
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    ;;
+  m68k)
+    library_names_spec='$libname.ixlibrary $libname.a'
+    # Create ${libname}_ixlibrary.a entries in /sys/libs.
+    finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$ECHO "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
+    ;;
+  esac
+  ;;
 
-# Run-time system search path for libraries
-sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
+beos*)
+  library_names_spec='${libname}${shared_ext}'
+  dynamic_linker="$host_os ld.so"
+  shlibpath_var=LIBRARY_PATH
+  ;;
 
-# Fix the shell variable \$srcfile for the compiler.
-fix_srcfile_path=$lt_fix_srcfile_path
+bsdi[45]*)
+  version_type=linux
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
+  sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
+  # the default ld.so.conf also contains /usr/contrib/lib and
+  # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
+  # libtool to hard-code these into programs
+  ;;
 
-# Set to yes if exported symbols are required.
-always_export_symbols=$always_export_symbols_CXX
+cygwin* | mingw* | pw32* | cegcc*)
+  version_type=windows
+  shrext_cmds=".dll"
+  need_version=no
+  need_lib_prefix=no
 
-# The commands to list exported symbols.
-export_symbols_cmds=$lt_export_symbols_cmds_CXX
+  case $GCC,$host_os in
+  yes,cygwin* | yes,mingw* | yes,pw32* | yes,cegcc*)
+    library_names_spec='$libname.dll.a'
+    # DLL is installed to $(libdir)/../bin by postinstall_cmds
+    postinstall_cmds='base_file=`basename \${file}`~
+      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
+      dldir=$destdir/`dirname \$dlpath`~
+      test -d \$dldir || mkdir -p \$dldir~
+      $install_prog $dir/$dlname \$dldir/$dlname~
+      chmod a+x \$dldir/$dlname~
+      if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then
+        eval '\''$striplib \$dldir/$dlname'\'' || exit \$?;
+      fi'
+    postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
+      dlpath=$dir/\$dldll~
+       $RM \$dlpath'
+    shlibpath_overrides_runpath=yes
 
-# The commands to extract the exported symbol list from a shared archive.
-extract_expsyms_cmds=$lt_extract_expsyms_cmds
+    case $host_os in
+    cygwin*)
+      # Cygwin DLLs use 'cyg' prefix rather than 'lib'
+      soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+      sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib"
+      ;;
+    mingw* | cegcc*)
+      # MinGW DLLs use traditional 'lib' prefix
+      soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+      sys_lib_search_path_spec=`$CC -print-search-dirs | $GREP "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
+      if $ECHO "$sys_lib_search_path_spec" | $GREP ';[c-zC-Z]:/' >/dev/null; then
+        # It is most probably a Windows format PATH printed by
+        # mingw gcc, but we are running on Cygwin. Gcc prints its search
+        # path with ; separators, and with drive letters. We can handle the
+        # drive letters (cygwin fileutils understands them), so leave them,
+        # especially as we might pass files found there to a mingw objdump,
+        # which wouldn't understand a cygwinified path. Ahh.
+        sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
+      else
+        sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED  -e "s/$PATH_SEPARATOR/ /g"`
+      fi
+      ;;
+    pw32*)
+      # pw32 DLLs use 'pw' prefix rather than 'lib'
+      library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+      ;;
+    esac
+    ;;
 
-# Symbols that should not be listed in the preloaded symbols.
-exclude_expsyms=$lt_exclude_expsyms_CXX
+  *)
+    library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib'
+    ;;
+  esac
+  dynamic_linker='Win32 ld.exe'
+  # FIXME: first we should search . and the directory the executable is in
+  shlibpath_var=PATH
+  ;;
 
-# Symbols that must always be exported.
-include_expsyms=$lt_include_expsyms_CXX
+darwin* | rhapsody*)
+  dynamic_linker="$host_os dyld"
+  version_type=darwin
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext'
+  soname_spec='${libname}${release}${major}$shared_ext'
+  shlibpath_overrides_runpath=yes
+  shlibpath_var=DYLD_LIBRARY_PATH
+  shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
 
-# ### END LIBTOOL TAG CONFIG: $tagname
+  sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib"
+  sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
+  ;;
 
-__EOF__
+dgux*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  ;;
 
+freebsd1*)
+  dynamic_linker=no
+  ;;
 
-else
-  # If there is no Makefile yet, we rely on a make rule to execute
-  # `config.status --recheck' to rerun these tests and create the
-  # libtool script then.
-  ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'`
-  if test -f "$ltmain_in"; then
-    test -f Makefile && make "$ltmain"
+freebsd* | dragonfly*)
+  # DragonFly does not have aout.  When/if they implement a new
+  # versioning mechanism, adjust this.
+  if test -x /usr/bin/objformat; then
+    objformat=`/usr/bin/objformat`
+  else
+    case $host_os in
+    freebsd[123]*) objformat=aout ;;
+    *) objformat=elf ;;
+    esac
   fi
-fi
-
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-CC=$lt_save_CC
-LDCXX=$LD
-LD=$lt_save_LD
-GCC=$lt_save_GCC
-with_gnu_ldcxx=$with_gnu_ld
-with_gnu_ld=$lt_save_with_gnu_ld
-lt_cv_path_LDCXX=$lt_cv_path_LD
-lt_cv_path_LD=$lt_save_path_LD
-lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld
-lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld
-
-	else
-	  tagname=""
-	fi
-	;;
-
-      F77)
-	if test -n "$F77" && test "X$F77" != "Xno"; then
-
-ac_ext=f
-ac_compile='$F77 -c $FFLAGS conftest.$ac_ext >&5'
-ac_link='$F77 -o conftest$ac_exeext $FFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_f77_compiler_gnu
-
-
-archive_cmds_need_lc_F77=no
-allow_undefined_flag_F77=
-always_export_symbols_F77=no
-archive_expsym_cmds_F77=
-export_dynamic_flag_spec_F77=
-hardcode_direct_F77=no
-hardcode_libdir_flag_spec_F77=
-hardcode_libdir_flag_spec_ld_F77=
-hardcode_libdir_separator_F77=
-hardcode_minus_L_F77=no
-hardcode_automatic_F77=no
-module_cmds_F77=
-module_expsym_cmds_F77=
-link_all_deplibs_F77=unknown
-old_archive_cmds_F77=$old_archive_cmds
-no_undefined_flag_F77=
-whole_archive_flag_spec_F77=
-enable_shared_with_static_runtimes_F77=no
-
-# Source file extension for f77 test sources.
-ac_ext=f
-
-# Object file extension for compiled f77 test sources.
-objext=o
-objext_F77=$objext
-
-# Code to be used in simple compile tests
-lt_simple_compile_test_code="\
-      subroutine t
-      return
-      end
-"
-
-# Code to be used in simple link tests
-lt_simple_link_test_code="\
-      program t
-      end
-"
-
-# ltmain only uses $CC for tagged configurations so make sure $CC is set.
+  version_type=freebsd-$objformat
+  case $version_type in
+    freebsd-elf*)
+      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
+      need_version=no
+      need_lib_prefix=no
+      ;;
+    freebsd-*)
+      library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
+      need_version=yes
+      ;;
+  esac
+  shlibpath_var=LD_LIBRARY_PATH
+  case $host_os in
+  freebsd2*)
+    shlibpath_overrides_runpath=yes
+    ;;
+  freebsd3.[01]* | freebsdelf3.[01]*)
+    shlibpath_overrides_runpath=yes
+    hardcode_into_libs=yes
+    ;;
+  freebsd3.[2-9]* | freebsdelf3.[2-9]* | \
+  freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1)
+    shlibpath_overrides_runpath=no
+    hardcode_into_libs=yes
+    ;;
+  *) # from 4.6 on, and DragonFly
+    shlibpath_overrides_runpath=yes
+    hardcode_into_libs=yes
+    ;;
+  esac
+  ;;
 
-# If no C compiler was specified, use CC.
-LTCC=${LTCC-"$CC"}
+gnu*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  hardcode_into_libs=yes
+  ;;
 
-# If no C compiler flags were specified, use CFLAGS.
-LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
+hpux9* | hpux10* | hpux11*)
+  # Give a soname corresponding to the major version so that dld.sl refuses to
+  # link against other versions.
+  version_type=sunos
+  need_lib_prefix=no
+  need_version=no
+  case $host_cpu in
+  ia64*)
+    shrext_cmds='.so'
+    hardcode_into_libs=yes
+    dynamic_linker="$host_os dld.so"
+    shlibpath_var=LD_LIBRARY_PATH
+    shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    soname_spec='${libname}${release}${shared_ext}$major'
+    if test "X$HPUX_IA64_MODE" = X32; then
+      sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
+    else
+      sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
+    fi
+    sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+    ;;
+  hppa*64*)
+    shrext_cmds='.sl'
+    hardcode_into_libs=yes
+    dynamic_linker="$host_os dld.sl"
+    shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
+    shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    soname_spec='${libname}${release}${shared_ext}$major'
+    sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
+    sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+    ;;
+  *)
+    shrext_cmds='.sl'
+    dynamic_linker="$host_os dld.sl"
+    shlibpath_var=SHLIB_PATH
+    shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    soname_spec='${libname}${release}${shared_ext}$major'
+    ;;
+  esac
+  # HP-UX runs *really* slowly unless shared libraries are mode 555.
+  postinstall_cmds='chmod 555 $lib'
+  ;;
 
-# Allow CC to be a program name with arguments.
-compiler=$CC
+interix[3-9]*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  ;;
 
+irix5* | irix6* | nonstopux*)
+  case $host_os in
+    nonstopux*) version_type=nonstopux ;;
+    *)
+	if test "$lt_cv_prog_gnu_ld" = yes; then
+		version_type=linux
+	else
+		version_type=irix
+	fi ;;
+  esac
+  need_lib_prefix=no
+  need_version=no
+  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
+  case $host_os in
+  irix5* | nonstopux*)
+    libsuff= shlibsuff=
+    ;;
+  *)
+    case $LD in # libtool.m4 will add one of these switches to LD
+    *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
+      libsuff= shlibsuff= libmagic=32-bit;;
+    *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
+      libsuff=32 shlibsuff=N32 libmagic=N32;;
+    *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
+      libsuff=64 shlibsuff=64 libmagic=64-bit;;
+    *) libsuff= shlibsuff= libmagic=never-match;;
+    esac
+    ;;
+  esac
+  shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
+  shlibpath_overrides_runpath=no
+  sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
+  sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
+  hardcode_into_libs=yes
+  ;;
 
-# save warnings/boilerplate of simple test code
-ac_outfile=conftest.$ac_objext
-echo "$lt_simple_compile_test_code" >conftest.$ac_ext
-eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
-_lt_compiler_boilerplate=`cat conftest.err`
-$rm conftest*
+# No shared lib support for Linux oldld, aout, or coff.
+linux*oldld* | linux*aout* | linux*coff*)
+  dynamic_linker=no
+  ;;
 
-ac_outfile=conftest.$ac_objext
-echo "$lt_simple_link_test_code" >conftest.$ac_ext
-eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
-_lt_linker_boilerplate=`cat conftest.err`
-$rm -r conftest*
+# This must be Linux ELF.
+linux* | k*bsd*-gnu)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  # Some binutils ld are patched to set DT_RUNPATH
+  save_LDFLAGS=$LDFLAGS
+  save_libdir=$libdir
+  eval "libdir=/foo; wl=\"$lt_prog_compiler_wl\"; \
+       LDFLAGS=\"\$LDFLAGS $hardcode_libdir_flag_spec\""
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
 
+int
+main ()
+{
 
-# Allow CC to be a program name with arguments.
-lt_save_CC="$CC"
-CC=${F77-"f77"}
-compiler=$CC
-compiler_F77=$CC
-for cc_temp in $compiler""; do
-  case $cc_temp in
-    compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
-    distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
-    \-*) ;;
-    *) break;;
-  esac
-done
-cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  if  ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null; then :
+  shlibpath_overrides_runpath=yes
+fi
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+  LDFLAGS=$save_LDFLAGS
+  libdir=$save_libdir
 
+  # This implies no fast_install, which is unacceptable.
+  # Some rework will be needed to allow for fast_install
+  # before this can be enabled.
+  hardcode_into_libs=yes
 
-{ $as_echo "$as_me:$LINENO: checking if libtool supports shared libraries" >&5
-$as_echo_n "checking if libtool supports shared libraries... " >&6; }
-{ $as_echo "$as_me:$LINENO: result: $can_build_shared" >&5
-$as_echo "$can_build_shared" >&6; }
+  # Append ld.so.conf contents to the search path
+  if test -f /etc/ld.so.conf; then
+    lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[	 ]*hwcap[	 ]/d;s/[:,	]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
+    sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
+  fi
 
-{ $as_echo "$as_me:$LINENO: checking whether to build shared libraries" >&5
-$as_echo_n "checking whether to build shared libraries... " >&6; }
-test "$can_build_shared" = "no" && enable_shared=no
+  # We used to test for /lib/ld.so.1 and disable shared libraries on
+  # powerpc, because MkLinux only supported shared libraries with the
+  # GNU dynamic linker.  Since this was broken with cross compilers,
+  # most powerpc-linux boxes support dynamic linking these days and
+  # people can always --disable-shared, the test was removed, and we
+  # assume the GNU/Linux dynamic linker is in use.
+  dynamic_linker='GNU/Linux ld.so'
+  ;;
 
-# On AIX, shared libraries and static libraries use the same namespace, and
-# are all built from PIC.
-case $host_os in
-aix3*)
-  test "$enable_shared" = yes && enable_static=no
-  if test -n "$RANLIB"; then
-    archive_cmds="$archive_cmds~\$RANLIB \$lib"
-    postinstall_cmds='$RANLIB $lib'
-  fi
+netbsdelf*-gnu)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  dynamic_linker='NetBSD ld.elf_so'
   ;;
-aix[4-9]*)
-  if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
-    test "$enable_shared" = yes && enable_static=no
+
+netbsd*)
+  version_type=sunos
+  need_lib_prefix=no
+  need_version=no
+  if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+    finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+    dynamic_linker='NetBSD (a.out) ld.so'
+  else
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+    soname_spec='${libname}${release}${shared_ext}$major'
+    dynamic_linker='NetBSD ld.elf_so'
   fi
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  hardcode_into_libs=yes
   ;;
-esac
-{ $as_echo "$as_me:$LINENO: result: $enable_shared" >&5
-$as_echo "$enable_shared" >&6; }
-
-{ $as_echo "$as_me:$LINENO: checking whether to build static libraries" >&5
-$as_echo_n "checking whether to build static libraries... " >&6; }
-# Make sure either enable_shared or enable_static is yes.
-test "$enable_shared" = yes || enable_static=yes
-{ $as_echo "$as_me:$LINENO: result: $enable_static" >&5
-$as_echo "$enable_static" >&6; }
-
-GCC_F77="$G77"
-LD_F77="$LD"
 
-lt_prog_compiler_wl_F77=
-lt_prog_compiler_pic_F77=
-lt_prog_compiler_static_F77=
-
-{ $as_echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5
-$as_echo_n "checking for $compiler option to produce PIC... " >&6; }
+newsos6)
+  version_type=linux
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  ;;
 
-  if test "$GCC" = yes; then
-    lt_prog_compiler_wl_F77='-Wl,'
-    lt_prog_compiler_static_F77='-static'
+*nto* | *qnx*)
+  version_type=qnx
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  dynamic_linker='ldqnx.so'
+  ;;
 
+openbsd*)
+  version_type=sunos
+  sys_lib_dlsearch_path_spec="/usr/lib"
+  need_lib_prefix=no
+  # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
+  case $host_os in
+    openbsd3.3 | openbsd3.3.*)	need_version=yes ;;
+    *)				need_version=no  ;;
+  esac
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
     case $host_os in
-      aix*)
-      # All AIX code is PIC.
-      if test "$host_cpu" = ia64; then
-	# AIX 5 now supports IA64 processor
-	lt_prog_compiler_static_F77='-Bstatic'
-      fi
-      ;;
+      openbsd2.[89] | openbsd2.[89].*)
+	shlibpath_overrides_runpath=no
+	;;
+      *)
+	shlibpath_overrides_runpath=yes
+	;;
+      esac
+  else
+    shlibpath_overrides_runpath=yes
+  fi
+  ;;
 
-    amigaos*)
-      # FIXME: we need at least 68020 code to build shared libraries, but
-      # adding the `-m68020' flag to GCC prevents building anything better,
-      # like `-m68040'.
-      lt_prog_compiler_pic_F77='-m68020 -resident32 -malways-restore-a4'
-      ;;
+os2*)
+  libname_spec='$name'
+  shrext_cmds=".dll"
+  need_lib_prefix=no
+  library_names_spec='$libname${shared_ext} $libname.a'
+  dynamic_linker='OS/2 ld.exe'
+  shlibpath_var=LIBPATH
+  ;;
 
-    beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
-      # PIC is the default for these OSes.
-      ;;
+osf3* | osf4* | osf5*)
+  version_type=osf
+  need_lib_prefix=no
+  need_version=no
+  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  shlibpath_var=LD_LIBRARY_PATH
+  sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
+  sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
+  ;;
 
-    mingw* | cygwin* | pw32* | os2*)
-      # This hack is so that the source file can tell whether it is being
-      # built for inclusion in a dll (and should export symbols for example).
-      # Although the cygwin gcc ignores -fPIC, still need this for old-style
-      # (--disable-auto-import) libraries
-      lt_prog_compiler_pic_F77='-DDLL_EXPORT'
-      ;;
+rdos*)
+  dynamic_linker=no
+  ;;
 
-    darwin* | rhapsody*)
-      # PIC is the default on this platform
-      # Common symbols not allowed in MH_DYLIB files
-      lt_prog_compiler_pic_F77='-fno-common'
-      ;;
+solaris*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  hardcode_into_libs=yes
+  # ldd complains unless libraries are executable
+  postinstall_cmds='chmod +x $lib'
+  ;;
 
-    interix[3-9]*)
-      # Interix 3.x gcc -fpic/-fPIC options generate broken code.
-      # Instead, we relocate shared libraries at runtime.
-      ;;
+sunos4*)
+  version_type=sunos
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+  finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  if test "$with_gnu_ld" = yes; then
+    need_lib_prefix=no
+  fi
+  need_version=yes
+  ;;
 
-    msdosdjgpp*)
-      # Just because we use GCC doesn't mean we suddenly get shared libraries
-      # on systems that don't support them.
-      lt_prog_compiler_can_build_shared_F77=no
-      enable_shared=no
+sysv4 | sysv4.3*)
+  version_type=linux
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  case $host_vendor in
+    sni)
+      shlibpath_overrides_runpath=no
+      need_lib_prefix=no
+      runpath_var=LD_RUN_PATH
       ;;
-
-    sysv4*MP*)
-      if test -d /usr/nec; then
-	lt_prog_compiler_pic_F77=-Kconform_pic
-      fi
+    siemens)
+      need_lib_prefix=no
       ;;
-
-    hpux*)
-      # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
-      # not for PA HP-UX.
-      case $host_cpu in
-      hppa*64*|ia64*)
-	# +Z the default
-	;;
-      *)
-	lt_prog_compiler_pic_F77='-fPIC'
-	;;
-      esac
+    motorola)
+      need_lib_prefix=no
+      need_version=no
+      shlibpath_overrides_runpath=no
+      sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
       ;;
+  esac
+  ;;
 
-    *)
-      lt_prog_compiler_pic_F77='-fPIC'
-      ;;
-    esac
+sysv4*MP*)
+  if test -d /usr/nec ;then
+    version_type=linux
+    library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
+    soname_spec='$libname${shared_ext}.$major'
+    shlibpath_var=LD_LIBRARY_PATH
+  fi
+  ;;
+
+sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
+  version_type=freebsd-elf
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  hardcode_into_libs=yes
+  if test "$with_gnu_ld" = yes; then
+    sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
   else
-    # PORTME Check for flag to pass linker flags through the system compiler.
+    sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
     case $host_os in
-    aix*)
-      lt_prog_compiler_wl_F77='-Wl,'
-      if test "$host_cpu" = ia64; then
-	# AIX 5 now supports IA64 processor
-	lt_prog_compiler_static_F77='-Bstatic'
-      else
-	lt_prog_compiler_static_F77='-bnso -bI:/lib/syscalls.exp'
-      fi
-      ;;
-      darwin*)
-        # PIC is the default on this platform
-        # Common symbols not allowed in MH_DYLIB files
-       case $cc_basename in
-         xlc*)
-         lt_prog_compiler_pic_F77='-qnocommon'
-         lt_prog_compiler_wl_F77='-Wl,'
-         ;;
-       esac
-       ;;
+      sco3.2v5*)
+        sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
+	;;
+    esac
+  fi
+  sys_lib_dlsearch_path_spec='/usr/lib'
+  ;;
 
-    mingw* | cygwin* | pw32* | os2*)
-      # This hack is so that the source file can tell whether it is being
-      # built for inclusion in a dll (and should export symbols for example).
-      lt_prog_compiler_pic_F77='-DDLL_EXPORT'
-      ;;
+tpf*)
+  # TPF is a cross-target only.  Preferred cross-host = GNU/Linux.
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  ;;
 
-    hpux9* | hpux10* | hpux11*)
-      lt_prog_compiler_wl_F77='-Wl,'
-      # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
-      # not for PA HP-UX.
-      case $host_cpu in
-      hppa*64*|ia64*)
-	# +Z the default
-	;;
-      *)
-	lt_prog_compiler_pic_F77='+Z'
-	;;
-      esac
-      # Is there a better lt_prog_compiler_static that works with the bundled CC?
-      lt_prog_compiler_static_F77='${wl}-a ${wl}archive'
-      ;;
+uts4*)
+  version_type=linux
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  ;;
 
-    irix5* | irix6* | nonstopux*)
-      lt_prog_compiler_wl_F77='-Wl,'
-      # PIC (with -KPIC) is the default.
-      lt_prog_compiler_static_F77='-non_shared'
-      ;;
+*)
+  dynamic_linker=no
+  ;;
+esac
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $dynamic_linker" >&5
+$as_echo "$dynamic_linker" >&6; }
+test "$dynamic_linker" = no && can_build_shared=no
 
-    newsos6)
-      lt_prog_compiler_pic_F77='-KPIC'
-      lt_prog_compiler_static_F77='-Bstatic'
-      ;;
+variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
+if test "$GCC" = yes; then
+  variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
+fi
 
-    linux* | k*bsd*-gnu)
-      case $cc_basename in
-      icc* | ecc*)
-	lt_prog_compiler_wl_F77='-Wl,'
-	lt_prog_compiler_pic_F77='-KPIC'
-	lt_prog_compiler_static_F77='-static'
-        ;;
-      pgcc* | pgf77* | pgf90* | pgf95*)
-        # Portland Group compilers (*not* the Pentium gcc compiler,
-	# which looks to be a dead project)
-	lt_prog_compiler_wl_F77='-Wl,'
-	lt_prog_compiler_pic_F77='-fpic'
-	lt_prog_compiler_static_F77='-Bstatic'
-        ;;
-      ccc*)
-        lt_prog_compiler_wl_F77='-Wl,'
-        # All Alpha code is PIC.
-        lt_prog_compiler_static_F77='-non_shared'
-        ;;
-      *)
-        case `$CC -V 2>&1 | sed 5q` in
-	*Sun\ C*)
-	  # Sun C 5.9
-	  lt_prog_compiler_pic_F77='-KPIC'
-	  lt_prog_compiler_static_F77='-Bstatic'
-	  lt_prog_compiler_wl_F77='-Wl,'
-	  ;;
-	*Sun\ F*)
-	  # Sun Fortran 8.3 passes all unrecognized flags to the linker
-	  lt_prog_compiler_pic_F77='-KPIC'
-	  lt_prog_compiler_static_F77='-Bstatic'
-	  lt_prog_compiler_wl_F77=''
-	  ;;
-	esac
-	;;
-      esac
-      ;;
+if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then
+  sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec"
+fi
+if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then
+  sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec"
+fi
 
-    osf3* | osf4* | osf5*)
-      lt_prog_compiler_wl_F77='-Wl,'
-      # All OSF/1 code is PIC.
-      lt_prog_compiler_static_F77='-non_shared'
-      ;;
 
-    rdos*)
-      lt_prog_compiler_static_F77='-non_shared'
-      ;;
 
-    solaris*)
-      lt_prog_compiler_pic_F77='-KPIC'
-      lt_prog_compiler_static_F77='-Bstatic'
-      case $cc_basename in
-      f77* | f90* | f95*)
-	lt_prog_compiler_wl_F77='-Qoption ld ';;
-      *)
-	lt_prog_compiler_wl_F77='-Wl,';;
-      esac
-      ;;
 
-    sunos4*)
-      lt_prog_compiler_wl_F77='-Qoption ld '
-      lt_prog_compiler_pic_F77='-PIC'
-      lt_prog_compiler_static_F77='-Bstatic'
-      ;;
 
-    sysv4 | sysv4.2uw2* | sysv4.3*)
-      lt_prog_compiler_wl_F77='-Wl,'
-      lt_prog_compiler_pic_F77='-KPIC'
-      lt_prog_compiler_static_F77='-Bstatic'
-      ;;
 
-    sysv4*MP*)
-      if test -d /usr/nec ;then
-	lt_prog_compiler_pic_F77='-Kconform_pic'
-	lt_prog_compiler_static_F77='-Bstatic'
-      fi
-      ;;
 
-    sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
-      lt_prog_compiler_wl_F77='-Wl,'
-      lt_prog_compiler_pic_F77='-KPIC'
-      lt_prog_compiler_static_F77='-Bstatic'
-      ;;
 
-    unicos*)
-      lt_prog_compiler_wl_F77='-Wl,'
-      lt_prog_compiler_can_build_shared_F77=no
-      ;;
 
-    uts4*)
-      lt_prog_compiler_pic_F77='-pic'
-      lt_prog_compiler_static_F77='-Bstatic'
-      ;;
 
-    *)
-      lt_prog_compiler_can_build_shared_F77=no
-      ;;
-    esac
-  fi
 
-{ $as_echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_F77" >&5
-$as_echo "$lt_prog_compiler_pic_F77" >&6; }
 
-#
-# Check to make sure the PIC flag actually works.
-#
-if test -n "$lt_prog_compiler_pic_F77"; then
 
-{ $as_echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic_F77 works" >&5
-$as_echo_n "checking if $compiler PIC flag $lt_prog_compiler_pic_F77 works... " >&6; }
-if test "${lt_cv_prog_compiler_pic_works_F77+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
-  lt_cv_prog_compiler_pic_works_F77=no
-  ac_outfile=conftest.$ac_objext
-   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
-   lt_compiler_flag="$lt_prog_compiler_pic_F77"
-   # Insert the option either (1) after the last *FLAGS variable, or
-   # (2) before a word containing "conftest.", or (3) at the end.
-   # Note that $ac_compile itself does not contain backslashes and begins
-   # with a dollar sign (not a hyphen), so the echo should work correctly.
-   # The option is referenced via a variable to avoid confusing sed.
-   lt_compile=`echo "$ac_compile" | $SED \
-   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-   -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:15276: $lt_compile\"" >&5)
-   (eval "$lt_compile" 2>conftest.err)
-   ac_status=$?
-   cat conftest.err >&5
-   echo "$as_me:15280: \$? = $ac_status" >&5
-   if (exit $ac_status) && test -s "$ac_outfile"; then
-     # The compiler can only warn and ignore the option if not recognized
-     # So say no if there are warnings other than the usual output.
-     $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
-     $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
-     if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
-       lt_cv_prog_compiler_pic_works_F77=yes
-     fi
-   fi
-   $rm conftest*
 
-fi
-{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_pic_works_F77" >&5
-$as_echo "$lt_cv_prog_compiler_pic_works_F77" >&6; }
 
-if test x"$lt_cv_prog_compiler_pic_works_F77" = xyes; then
-    case $lt_prog_compiler_pic_F77 in
-     "" | " "*) ;;
-     *) lt_prog_compiler_pic_F77=" $lt_prog_compiler_pic_F77" ;;
-     esac
-else
-    lt_prog_compiler_pic_F77=
-     lt_prog_compiler_can_build_shared_F77=no
-fi
 
-fi
-case $host_os in
-  # For platforms which do not support PIC, -DPIC is meaningless:
-  *djgpp*)
-    lt_prog_compiler_pic_F77=
-    ;;
-  *)
-    lt_prog_compiler_pic_F77="$lt_prog_compiler_pic_F77"
-    ;;
-esac
 
-#
-# Check to make sure the static flag actually works.
-#
-wl=$lt_prog_compiler_wl_F77 eval lt_tmp_static_flag=\"$lt_prog_compiler_static_F77\"
-{ $as_echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5
-$as_echo_n "checking if $compiler static flag $lt_tmp_static_flag works... " >&6; }
-if test "${lt_cv_prog_compiler_static_works_F77+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
-  lt_cv_prog_compiler_static_works_F77=no
-   save_LDFLAGS="$LDFLAGS"
-   LDFLAGS="$LDFLAGS $lt_tmp_static_flag"
-   echo "$lt_simple_link_test_code" > conftest.$ac_ext
-   if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
-     # The linker can only warn and ignore the option if not recognized
-     # So say no if there are warnings
-     if test -s conftest.err; then
-       # Append any errors to the config.log.
-       cat conftest.err 1>&5
-       $echo "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp
-       $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
-       if diff conftest.exp conftest.er2 >/dev/null; then
-         lt_cv_prog_compiler_static_works_F77=yes
-       fi
-     else
-       lt_cv_prog_compiler_static_works_F77=yes
-     fi
-   fi
-   $rm -r conftest*
-   LDFLAGS="$save_LDFLAGS"
 
-fi
-{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_static_works_F77" >&5
-$as_echo "$lt_cv_prog_compiler_static_works_F77" >&6; }
 
-if test x"$lt_cv_prog_compiler_static_works_F77" = xyes; then
-    :
-else
-    lt_prog_compiler_static_F77=
-fi
 
 
-{ $as_echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5
-$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; }
-if test "${lt_cv_prog_compiler_c_o_F77+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
-  lt_cv_prog_compiler_c_o_F77=no
-   $rm -r conftest 2>/dev/null
-   mkdir conftest
-   cd conftest
-   mkdir out
-   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
 
-   lt_compiler_flag="-o out/conftest2.$ac_objext"
-   # Insert the option either (1) after the last *FLAGS variable, or
-   # (2) before a word containing "conftest.", or (3) at the end.
-   # Note that $ac_compile itself does not contain backslashes and begins
-   # with a dollar sign (not a hyphen), so the echo should work correctly.
-   lt_compile=`echo "$ac_compile" | $SED \
-   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-   -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:15380: $lt_compile\"" >&5)
-   (eval "$lt_compile" 2>out/conftest.err)
-   ac_status=$?
-   cat out/conftest.err >&5
-   echo "$as_me:15384: \$? = $ac_status" >&5
-   if (exit $ac_status) && test -s out/conftest2.$ac_objext
-   then
-     # The compiler can only warn and ignore the option if not recognized
-     # So say no if there are warnings
-     $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
-     $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
-     if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
-       lt_cv_prog_compiler_c_o_F77=yes
-     fi
-   fi
-   chmod u+w . 2>&5
-   $rm conftest*
-   # SGI C++ compiler will create directory out/ii_files/ for
-   # template instantiation
-   test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files
-   $rm out/* && rmdir out
-   cd ..
-   rmdir conftest
-   $rm conftest*
 
-fi
-{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o_F77" >&5
-$as_echo "$lt_cv_prog_compiler_c_o_F77" >&6; }
 
 
-hard_links="nottested"
-if test "$lt_cv_prog_compiler_c_o_F77" = no && test "$need_locks" != no; then
-  # do not overwrite the value of need_locks provided by the user
-  { $as_echo "$as_me:$LINENO: checking if we can lock with hard links" >&5
-$as_echo_n "checking if we can lock with hard links... " >&6; }
-  hard_links=yes
-  $rm conftest*
-  ln conftest.a conftest.b 2>/dev/null && hard_links=no
-  touch conftest.a
-  ln conftest.a conftest.b 2>&5 || hard_links=no
-  ln conftest.a conftest.b 2>/dev/null && hard_links=no
-  { $as_echo "$as_me:$LINENO: result: $hard_links" >&5
-$as_echo "$hard_links" >&6; }
-  if test "$hard_links" = no; then
-    { $as_echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5
-$as_echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;}
-    need_locks=warn
-  fi
-else
-  need_locks=no
-fi
 
-{ $as_echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5
-$as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; }
 
-  runpath_var=
-  allow_undefined_flag_F77=
-  enable_shared_with_static_runtimes_F77=no
-  archive_cmds_F77=
-  archive_expsym_cmds_F77=
-  old_archive_From_new_cmds_F77=
-  old_archive_from_expsyms_cmds_F77=
-  export_dynamic_flag_spec_F77=
-  whole_archive_flag_spec_F77=
-  thread_safe_flag_spec_F77=
-  hardcode_libdir_flag_spec_F77=
-  hardcode_libdir_flag_spec_ld_F77=
-  hardcode_libdir_separator_F77=
-  hardcode_direct_F77=no
-  hardcode_minus_L_F77=no
-  hardcode_shlibpath_var_F77=unsupported
-  link_all_deplibs_F77=unknown
-  hardcode_automatic_F77=no
-  module_cmds_F77=
-  module_expsym_cmds_F77=
-  always_export_symbols_F77=no
-  export_symbols_cmds_F77='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
-  # include_expsyms should be a list of space-separated symbols to be *always*
-  # included in the symbol list
-  include_expsyms_F77=
-  # exclude_expsyms can be an extended regexp of symbols to exclude
-  # it will be wrapped by ` (' and `)$', so one must not match beginning or
-  # end of line.  Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
-  # as well as any symbol that contains `d'.
-  exclude_expsyms_F77='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'
-  # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
-  # platforms (ab)use it in PIC code, but their linkers get confused if
-  # the symbol is explicitly referenced.  Since portable code cannot
-  # rely on this symbol name, it's probably fine to never include it in
-  # preloaded symbol tables.
-  # Exclude shared library initialization/finalization symbols.
-  extract_expsyms_cmds=
-  # Just being paranoid about ensuring that cc_basename is set.
-  for cc_temp in $compiler""; do
-  case $cc_temp in
-    compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
-    distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
-    \-*) ;;
-    *) break;;
-  esac
-done
-cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
 
-  case $host_os in
-  cygwin* | mingw* | pw32*)
-    # FIXME: the MSVC++ port hasn't been tested in a loooong time
-    # When not using gcc, we currently assume that we are using
-    # Microsoft Visual C++.
-    if test "$GCC" != yes; then
-      with_gnu_ld=no
-    fi
-    ;;
-  interix*)
-    # we just hope/assume this is gcc and not c89 (= MSVC++)
-    with_gnu_ld=yes
-    ;;
-  openbsd*)
-    with_gnu_ld=no
-    ;;
-  esac
 
-  ld_shlibs_F77=yes
-  if test "$with_gnu_ld" = yes; then
-    # If archive_cmds runs LD, not CC, wlarc should be empty
-    wlarc='${wl}'
 
-    # Set some defaults for GNU ld with shared library support. These
-    # are reset later if shared libraries are not supported. Putting them
-    # here allows them to be overridden if necessary.
-    runpath_var=LD_RUN_PATH
-    hardcode_libdir_flag_spec_F77='${wl}--rpath ${wl}$libdir'
-    export_dynamic_flag_spec_F77='${wl}--export-dynamic'
-    # ancient GNU ld didn't support --whole-archive et. al.
-    if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then
-	whole_archive_flag_spec_F77="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
-      else
-  	whole_archive_flag_spec_F77=
-    fi
-    supports_anon_versioning=no
-    case `$LD -v 2>/dev/null` in
-      *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11
-      *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
-      *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
-      *\ 2.11.*) ;; # other 2.11 versions
-      *) supports_anon_versioning=yes ;;
-    esac
 
-    # See if GNU ld supports shared libraries.
-    case $host_os in
-    aix[3-9]*)
-      # On AIX/PPC, the GNU linker is very broken
-      if test "$host_cpu" != ia64; then
-	ld_shlibs_F77=no
-	cat <<EOF 1>&2
 
-*** Warning: the GNU linker, at least up to release 2.9.1, is reported
-*** to be unable to reliably create shared libraries on AIX.
-*** Therefore, libtool is disabling shared libraries support.  If you
-*** really care for shared libraries, you may want to modify your PATH
-*** so that a non-GNU linker is found, and then restart.
 
-EOF
-      fi
-      ;;
 
-    amigaos*)
-      archive_cmds_F77='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
-      hardcode_libdir_flag_spec_F77='-L$libdir'
-      hardcode_minus_L_F77=yes
-
-      # Samuel A. Falvo II <kc5tja@dolphin.openprojects.net> reports
-      # that the semantics of dynamic libraries on AmigaOS, at least up
-      # to version 4, is to share data among multiple programs linked
-      # with the same dynamic library.  Since this doesn't match the
-      # behavior of shared libraries on other platforms, we can't use
-      # them.
-      ld_shlibs_F77=no
-      ;;
 
-    beos*)
-      if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-	allow_undefined_flag_F77=unsupported
-	# Joseph Beckenbach <jrb3@best.com> says some releases of gcc
-	# support --undefined.  This deserves some investigation.  FIXME
-	archive_cmds_F77='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-      else
-	ld_shlibs_F77=no
-      fi
-      ;;
 
-    cygwin* | mingw* | pw32*)
-      # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, F77) is actually meaningless,
-      # as there is no search path for DLLs.
-      hardcode_libdir_flag_spec_F77='-L$libdir'
-      allow_undefined_flag_F77=unsupported
-      always_export_symbols_F77=no
-      enable_shared_with_static_runtimes_F77=yes
-      export_symbols_cmds_F77='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/'\'' -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols'
 
-      if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
-        archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
-	# If the export-symbols file already is a .def file (1st line
-	# is EXPORTS), use it as is; otherwise, prepend...
-	archive_expsym_cmds_F77='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
-	  cp $export_symbols $output_objdir/$soname.def;
-	else
-	  echo EXPORTS > $output_objdir/$soname.def;
-	  cat $export_symbols >> $output_objdir/$soname.def;
-	fi~
-	$CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
-      else
-	ld_shlibs_F77=no
-      fi
-      ;;
 
-    interix[3-9]*)
-      hardcode_direct_F77=no
-      hardcode_shlibpath_var_F77=no
-      hardcode_libdir_flag_spec_F77='${wl}-rpath,$libdir'
-      export_dynamic_flag_spec_F77='${wl}-E'
-      # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
-      # Instead, shared libraries are loaded at an image base (0x10000000 by
-      # default) and relocated if they conflict, which is a slow very memory
-      # consuming and fragmenting process.  To avoid this, we pick a random,
-      # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
-      # time.  Moving up from 0x10000000 also allows more sbrk(2) space.
-      archive_cmds_F77='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
-      archive_expsym_cmds_F77='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
-      ;;
 
-    gnu* | linux* | k*bsd*-gnu)
-      if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-	tmp_addflag=
-	case $cc_basename,$host_cpu in
-	pgcc*)				# Portland Group C compiler
-	  whole_archive_flag_spec_F77='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
-	  tmp_addflag=' $pic_flag'
-	  ;;
-	pgf77* | pgf90* | pgf95*)	# Portland Group f77 and f90 compilers
-	  whole_archive_flag_spec_F77='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
-	  tmp_addflag=' $pic_flag -Mnomain' ;;
-	ecc*,ia64* | icc*,ia64*)		# Intel C compiler on ia64
-	  tmp_addflag=' -i_dynamic' ;;
-	efc*,ia64* | ifort*,ia64*)	# Intel Fortran compiler on ia64
-	  tmp_addflag=' -i_dynamic -nofor_main' ;;
-	ifc* | ifort*)			# Intel Fortran compiler
-	  tmp_addflag=' -nofor_main' ;;
-	esac
-	case `$CC -V 2>&1 | sed 5q` in
-	*Sun\ C*)			# Sun C 5.9
-	  whole_archive_flag_spec_F77='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
-	  tmp_sharedflag='-G' ;;
-	*Sun\ F*)			# Sun Fortran 8.3
-	  tmp_sharedflag='-G' ;;
-	*)
-	  tmp_sharedflag='-shared' ;;
-	esac
-	archive_cmds_F77='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
 
-	if test $supports_anon_versioning = yes; then
-	  archive_expsym_cmds_F77='$echo "{ global:" > $output_objdir/$libname.ver~
-  cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
-  $echo "local: *; };" >> $output_objdir/$libname.ver~
-	  $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
-	fi
-	link_all_deplibs_F77=no
-      else
-	ld_shlibs_F77=no
-      fi
-      ;;
 
-    netbsd*)
-      if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-	archive_cmds_F77='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
-	wlarc=
-      else
-	archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-	archive_expsym_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-      fi
-      ;;
 
-    solaris*)
-      if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then
-	ld_shlibs_F77=no
-	cat <<EOF 1>&2
 
-*** Warning: The releases 2.8.* of the GNU linker cannot reliably
-*** create shared libraries on Solaris systems.  Therefore, libtool
-*** is disabling shared libraries support.  We urge you to upgrade GNU
-*** binutils to release 2.9.1 or newer.  Another option is to modify
-*** your PATH or compiler configuration so that the native linker is
-*** used, and then restart.
 
-EOF
-      elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-	archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-	archive_expsym_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-      else
-	ld_shlibs_F77=no
-      fi
-      ;;
 
-    sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
-      case `$LD -v 2>&1` in
-        *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*)
-	ld_shlibs_F77=no
-	cat <<_LT_EOF 1>&2
 
-*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not
-*** reliably create shared libraries on SCO systems.  Therefore, libtool
-*** is disabling shared libraries support.  We urge you to upgrade GNU
-*** binutils to release 2.16.91.0.3 or newer.  Another option is to modify
-*** your PATH or compiler configuration so that the native linker is
-*** used, and then restart.
 
-_LT_EOF
-	;;
-	*)
-	  if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-	    hardcode_libdir_flag_spec_F77='`test -z "$SCOABSPATH" && echo ${wl}-rpath,$libdir`'
-	    archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib'
-	    archive_expsym_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname,-retain-symbols-file,$export_symbols -o $lib'
-	  else
-	    ld_shlibs_F77=no
-	  fi
-	;;
-      esac
-      ;;
 
-    sunos4*)
-      archive_cmds_F77='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-      wlarc=
-      hardcode_direct_F77=yes
-      hardcode_shlibpath_var_F77=no
-      ;;
 
-    *)
-      if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-	archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-	archive_expsym_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-      else
-	ld_shlibs_F77=no
-      fi
-      ;;
-    esac
 
-    if test "$ld_shlibs_F77" = no; then
-      runpath_var=
-      hardcode_libdir_flag_spec_F77=
-      export_dynamic_flag_spec_F77=
-      whole_archive_flag_spec_F77=
-    fi
-  else
-    # PORTME fill in a description of your system's linker (not GNU ld)
-    case $host_os in
-    aix3*)
-      allow_undefined_flag_F77=unsupported
-      always_export_symbols_F77=yes
-      archive_expsym_cmds_F77='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
-      # Note: this linker hardcodes the directories in LIBPATH if there
-      # are no directories specified by -L.
-      hardcode_minus_L_F77=yes
-      if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then
-	# Neither direct hardcoding nor static linking is supported with a
-	# broken collect2.
-	hardcode_direct_F77=unsupported
-      fi
-      ;;
 
-    aix[4-9]*)
-      if test "$host_cpu" = ia64; then
-	# On IA64, the linker does run time linking by default, so we don't
-	# have to do anything special.
-	aix_use_runtimelinking=no
-	exp_sym_flag='-Bexport'
-	no_entry_flag=""
-      else
-	# If we're using GNU nm, then we don't want the "-C" option.
-	# -C means demangle to AIX nm, but means don't demangle with GNU nm
-	if $NM -V 2>&1 | grep 'GNU' > /dev/null; then
-	  export_symbols_cmds_F77='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols'
-	else
-	  export_symbols_cmds_F77='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols'
-	fi
-	aix_use_runtimelinking=no
 
-	# Test if we are trying to use run time linking or normal
-	# AIX style linking. If -brtl is somewhere in LDFLAGS, we
-	# need to do runtime linking.
-	case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*)
-	  for ld_flag in $LDFLAGS; do
-  	  if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
-  	    aix_use_runtimelinking=yes
-  	    break
-  	  fi
-	  done
-	  ;;
-	esac
 
-	exp_sym_flag='-bexport'
-	no_entry_flag='-bnoentry'
-      fi
 
-      # When large executables or shared objects are built, AIX ld can
-      # have problems creating the table of contents.  If linking a library
-      # or program results in "error TOC overflow" add -mminimal-toc to
-      # CXXFLAGS/CFLAGS for g++/gcc.  In the cases where that is not
-      # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
 
-      archive_cmds_F77=''
-      hardcode_direct_F77=yes
-      hardcode_libdir_separator_F77=':'
-      link_all_deplibs_F77=yes
 
-      if test "$GCC" = yes; then
-	case $host_os in aix4.[012]|aix4.[012].*)
-	# We only want to do this on AIX 4.2 and lower, the check
-	# below for broken collect2 doesn't work under 4.3+
-	  collect2name=`${CC} -print-prog-name=collect2`
-	  if test -f "$collect2name" && \
-  	   strings "$collect2name" | grep resolve_lib_name >/dev/null
-	  then
-  	  # We have reworked collect2
-  	  :
-	  else
-  	  # We have old collect2
-  	  hardcode_direct_F77=unsupported
-  	  # It fails to find uninstalled libraries when the uninstalled
-  	  # path is not listed in the libpath.  Setting hardcode_minus_L
-  	  # to unsupported forces relinking
-  	  hardcode_minus_L_F77=yes
-  	  hardcode_libdir_flag_spec_F77='-L$libdir'
-  	  hardcode_libdir_separator_F77=
-	  fi
-	  ;;
-	esac
-	shared_flag='-shared'
-	if test "$aix_use_runtimelinking" = yes; then
-	  shared_flag="$shared_flag "'${wl}-G'
-	fi
-      else
-	# not using gcc
-	if test "$host_cpu" = ia64; then
-  	# VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
-  	# chokes on -Wl,-G. The following line is correct:
-	  shared_flag='-G'
-	else
-	  if test "$aix_use_runtimelinking" = yes; then
-	    shared_flag='${wl}-G'
-	  else
-	    shared_flag='${wl}-bM:SRE'
-	  fi
-	fi
-      fi
 
-      # It seems that -bexpall does not export symbols beginning with
-      # underscore (_), so it is better to generate a list of symbols to export.
-      always_export_symbols_F77=yes
-      if test "$aix_use_runtimelinking" = yes; then
-	# Warning - without using the other runtime loading flags (-brtl),
-	# -berok will link without error, but may produce a broken library.
-	allow_undefined_flag_F77='-berok'
-       # Determine the default libpath from the value encoded in an empty executable.
-       cat >conftest.$ac_ext <<_ACEOF
-      program main
 
-      end
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_link") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_f77_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest$ac_exeext && {
-	 test "$cross_compiling" = yes ||
-	 $as_test_x conftest$ac_exeext
-       }; then
 
-lt_aix_libpath_sed='
-    /Import File Strings/,/^$/ {
-	/^0/ {
-	    s/^0  *\(.*\)$/\1/
-	    p
-	}
-    }'
-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-# Check for a 64-bit object if we didn't find anything.
-if test -z "$aix_libpath"; then
-  aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-fi
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
 
 
-fi
 
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-      conftest$ac_exeext conftest.$ac_ext
-if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
 
-       hardcode_libdir_flag_spec_F77='${wl}-blibpath:$libdir:'"$aix_libpath"
-	archive_expsym_cmds_F77="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
-       else
-	if test "$host_cpu" = ia64; then
-	  hardcode_libdir_flag_spec_F77='${wl}-R $libdir:/usr/lib:/lib'
-	  allow_undefined_flag_F77="-z nodefs"
-	  archive_expsym_cmds_F77="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
-	else
-	 # Determine the default libpath from the value encoded in an empty executable.
-	 cat >conftest.$ac_ext <<_ACEOF
-      program main
 
-      end
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_link") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_f77_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest$ac_exeext && {
-	 test "$cross_compiling" = yes ||
-	 $as_test_x conftest$ac_exeext
-       }; then
 
-lt_aix_libpath_sed='
-    /Import File Strings/,/^$/ {
-	/^0/ {
-	    s/^0  *\(.*\)$/\1/
-	    p
-	}
-    }'
-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-# Check for a 64-bit object if we didn't find anything.
-if test -z "$aix_libpath"; then
-  aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-fi
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
 
 
-fi
 
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-      conftest$ac_exeext conftest.$ac_ext
-if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
 
-	 hardcode_libdir_flag_spec_F77='${wl}-blibpath:$libdir:'"$aix_libpath"
-	  # Warning - without using the other run time loading flags,
-	  # -berok will link without error, but may produce a broken library.
-	  no_undefined_flag_F77=' ${wl}-bernotok'
-	  allow_undefined_flag_F77=' ${wl}-berok'
-	  # Exported symbols can be pulled into shared objects from archives
-	  whole_archive_flag_spec_F77='$convenience'
-	  archive_cmds_need_lc_F77=yes
-	  # This is similar to how AIX traditionally builds its shared libraries.
-	  archive_expsym_cmds_F77="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
-	fi
-      fi
-      ;;
 
-    amigaos*)
-      archive_cmds_F77='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
-      hardcode_libdir_flag_spec_F77='-L$libdir'
-      hardcode_minus_L_F77=yes
-      # see comment about different semantics on the GNU ld section
-      ld_shlibs_F77=no
-      ;;
 
-    bsdi[45]*)
-      export_dynamic_flag_spec_F77=-rdynamic
-      ;;
 
-    cygwin* | mingw* | pw32*)
-      # When not using gcc, we currently assume that we are using
-      # Microsoft Visual C++.
-      # hardcode_libdir_flag_spec is actually meaningless, as there is
-      # no search path for DLLs.
-      hardcode_libdir_flag_spec_F77=' '
-      allow_undefined_flag_F77=unsupported
-      # Tell ltmain to make .lib files, not .a files.
-      libext=lib
-      # Tell ltmain to make .dll files, not .so files.
-      shrext_cmds=".dll"
-      # FIXME: Setting linknames here is a bad hack.
-      archive_cmds_F77='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames='
-      # The linker will automatically build a .lib file if we build a DLL.
-      old_archive_From_new_cmds_F77='true'
-      # FIXME: Should let the user specify the lib program.
-      old_archive_cmds_F77='lib -OUT:$oldlib$oldobjs$old_deplibs'
-      fix_srcfile_path_F77='`cygpath -w "$srcfile"`'
-      enable_shared_with_static_runtimes_F77=yes
-      ;;
 
-    darwin* | rhapsody*)
-      case $host_os in
-        rhapsody* | darwin1.[012])
-         allow_undefined_flag_F77='${wl}-undefined ${wl}suppress'
-         ;;
-       *) # Darwin 1.3 on
-         if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then
-           allow_undefined_flag_F77='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
-         else
-           case ${MACOSX_DEPLOYMENT_TARGET} in
-             10.[012])
-               allow_undefined_flag_F77='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
-               ;;
-             10.*)
-               allow_undefined_flag_F77='${wl}-undefined ${wl}dynamic_lookup'
-               ;;
-           esac
-         fi
-         ;;
-      esac
-      archive_cmds_need_lc_F77=no
-      hardcode_direct_F77=no
-      hardcode_automatic_F77=yes
-      hardcode_shlibpath_var_F77=unsupported
-      whole_archive_flag_spec_F77=''
-      link_all_deplibs_F77=yes
-    if test "$GCC" = yes ; then
-    	output_verbose_link_cmd='echo'
-        archive_cmds_F77="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}"
-        module_cmds_F77="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}"
-        archive_expsym_cmds_F77="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}"
-        module_expsym_cmds_F77="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}"
-    else
-      case $cc_basename in
-        xlc*)
-         output_verbose_link_cmd='echo'
-         archive_cmds_F77='$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $xlcverstring'
-         module_cmds_F77='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
-          # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
-         archive_expsym_cmds_F77='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $xlcverstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-          module_expsym_cmds_F77='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag  -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-          ;;
-       *)
-         ld_shlibs_F77=no
-          ;;
-      esac
-    fi
-      ;;
 
-    dgux*)
-      archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-      hardcode_libdir_flag_spec_F77='-L$libdir'
-      hardcode_shlibpath_var_F77=no
-      ;;
 
-    freebsd1*)
-      ld_shlibs_F77=no
-      ;;
 
-    # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
-    # support.  Future versions do this automatically, but an explicit c++rt0.o
-    # does not break anything, and helps significantly (at the cost of a little
-    # extra space).
-    freebsd2.2*)
-      archive_cmds_F77='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
-      hardcode_libdir_flag_spec_F77='-R$libdir'
-      hardcode_direct_F77=yes
-      hardcode_shlibpath_var_F77=no
-      ;;
 
-    # Unfortunately, older versions of FreeBSD 2 do not have this feature.
-    freebsd2*)
-      archive_cmds_F77='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-      hardcode_direct_F77=yes
-      hardcode_minus_L_F77=yes
-      hardcode_shlibpath_var_F77=no
-      ;;
 
-    # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
-    freebsd* | dragonfly*)
-      archive_cmds_F77='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
-      hardcode_libdir_flag_spec_F77='-R$libdir'
-      hardcode_direct_F77=yes
-      hardcode_shlibpath_var_F77=no
-      ;;
 
-    hpux9*)
-      if test "$GCC" = yes; then
-	archive_cmds_F77='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
-      else
-	archive_cmds_F77='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
-      fi
-      hardcode_libdir_flag_spec_F77='${wl}+b ${wl}$libdir'
-      hardcode_libdir_separator_F77=:
-      hardcode_direct_F77=yes
 
-      # hardcode_minus_L: Not really in the search PATH,
-      # but as the default location of the library.
-      hardcode_minus_L_F77=yes
-      export_dynamic_flag_spec_F77='${wl}-E'
-      ;;
 
-    hpux10*)
-      if test "$GCC" = yes -a "$with_gnu_ld" = no; then
-	archive_cmds_F77='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
-      else
-	archive_cmds_F77='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
-      fi
-      if test "$with_gnu_ld" = no; then
-	hardcode_libdir_flag_spec_F77='${wl}+b ${wl}$libdir'
-	hardcode_libdir_separator_F77=:
 
-	hardcode_direct_F77=yes
-	export_dynamic_flag_spec_F77='${wl}-E'
 
-	# hardcode_minus_L: Not really in the search PATH,
-	# but as the default location of the library.
-	hardcode_minus_L_F77=yes
-      fi
-      ;;
 
-    hpux11*)
-      if test "$GCC" = yes -a "$with_gnu_ld" = no; then
-	case $host_cpu in
-	hppa*64*)
-	  archive_cmds_F77='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-	  ;;
-	ia64*)
-	  archive_cmds_F77='$CC -shared ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
-	  ;;
-	*)
-	  archive_cmds_F77='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
-	  ;;
-	esac
-      else
-	case $host_cpu in
-	hppa*64*)
-	  archive_cmds_F77='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-	  ;;
-	ia64*)
-	  archive_cmds_F77='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
-	  ;;
-	*)
-	  archive_cmds_F77='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
-	  ;;
-	esac
-      fi
-      if test "$with_gnu_ld" = no; then
-	hardcode_libdir_flag_spec_F77='${wl}+b ${wl}$libdir'
-	hardcode_libdir_separator_F77=:
 
-	case $host_cpu in
-	hppa*64*|ia64*)
-	  hardcode_libdir_flag_spec_ld_F77='+b $libdir'
-	  hardcode_direct_F77=no
-	  hardcode_shlibpath_var_F77=no
-	  ;;
-	*)
-	  hardcode_direct_F77=yes
-	  export_dynamic_flag_spec_F77='${wl}-E'
 
-	  # hardcode_minus_L: Not really in the search PATH,
-	  # but as the default location of the library.
-	  hardcode_minus_L_F77=yes
-	  ;;
-	esac
-      fi
-      ;;
-
-    irix5* | irix6* | nonstopux*)
-      if test "$GCC" = yes; then
-	archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-      else
-	archive_cmds_F77='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-	hardcode_libdir_flag_spec_ld_F77='-rpath $libdir'
-      fi
-      hardcode_libdir_flag_spec_F77='${wl}-rpath ${wl}$libdir'
-      hardcode_libdir_separator_F77=:
-      link_all_deplibs_F77=yes
-      ;;
-
-    netbsd*)
-      if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-	archive_cmds_F77='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'  # a.out
-      else
-	archive_cmds_F77='$LD -shared -o $lib $libobjs $deplibs $linker_flags'      # ELF
-      fi
-      hardcode_libdir_flag_spec_F77='-R$libdir'
-      hardcode_direct_F77=yes
-      hardcode_shlibpath_var_F77=no
-      ;;
-
-    newsos6)
-      archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-      hardcode_direct_F77=yes
-      hardcode_libdir_flag_spec_F77='${wl}-rpath ${wl}$libdir'
-      hardcode_libdir_separator_F77=:
-      hardcode_shlibpath_var_F77=no
-      ;;
 
-    openbsd*)
-      if test -f /usr/libexec/ld.so; then
-	hardcode_direct_F77=yes
-	hardcode_shlibpath_var_F77=no
-	if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-	  archive_cmds_F77='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
-	  archive_expsym_cmds_F77='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
-	  hardcode_libdir_flag_spec_F77='${wl}-rpath,$libdir'
-	  export_dynamic_flag_spec_F77='${wl}-E'
-	else
-	  case $host_os in
-	   openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*)
-	     archive_cmds_F77='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-	     hardcode_libdir_flag_spec_F77='-R$libdir'
-	     ;;
-	   *)
-	     archive_cmds_F77='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
-	     hardcode_libdir_flag_spec_F77='${wl}-rpath,$libdir'
-	     ;;
-	  esac
-        fi
-      else
-	ld_shlibs_F77=no
-      fi
-      ;;
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to hardcode library paths into programs" >&5
+$as_echo_n "checking how to hardcode library paths into programs... " >&6; }
+hardcode_action=
+if test -n "$hardcode_libdir_flag_spec" ||
+   test -n "$runpath_var" ||
+   test "X$hardcode_automatic" = "Xyes" ; then
 
-    os2*)
-      hardcode_libdir_flag_spec_F77='-L$libdir'
-      hardcode_minus_L_F77=yes
-      allow_undefined_flag_F77=unsupported
-      archive_cmds_F77='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
-      old_archive_From_new_cmds_F77='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
-      ;;
+  # We can hardcode non-existent directories.
+  if test "$hardcode_direct" != no &&
+     # If the only mechanism to avoid hardcoding is shlibpath_var, we
+     # have to relink, otherwise we might link with an installed library
+     # when we should be linking with a yet-to-be-installed one
+     ## test "$_LT_TAGVAR(hardcode_shlibpath_var, )" != no &&
+     test "$hardcode_minus_L" != no; then
+    # Linking always hardcodes the temporary library directory.
+    hardcode_action=relink
+  else
+    # We can link without hardcoding, and we can hardcode nonexisting dirs.
+    hardcode_action=immediate
+  fi
+else
+  # We cannot hardcode anything, or else we can only hardcode existing
+  # directories.
+  hardcode_action=unsupported
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $hardcode_action" >&5
+$as_echo "$hardcode_action" >&6; }
 
-    osf3*)
-      if test "$GCC" = yes; then
-	allow_undefined_flag_F77=' ${wl}-expect_unresolved ${wl}\*'
-	archive_cmds_F77='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-      else
-	allow_undefined_flag_F77=' -expect_unresolved \*'
-	archive_cmds_F77='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-      fi
-      hardcode_libdir_flag_spec_F77='${wl}-rpath ${wl}$libdir'
-      hardcode_libdir_separator_F77=:
-      ;;
+if test "$hardcode_action" = relink ||
+   test "$inherit_rpath" = yes; then
+  # Fast installation is not supported
+  enable_fast_install=no
+elif test "$shlibpath_overrides_runpath" = yes ||
+     test "$enable_shared" = no; then
+  # Fast installation is not necessary
+  enable_fast_install=needless
+fi
 
-    osf4* | osf5*)	# as osf3* with the addition of -msym flag
-      if test "$GCC" = yes; then
-	allow_undefined_flag_F77=' ${wl}-expect_unresolved ${wl}\*'
-	archive_cmds_F77='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-	hardcode_libdir_flag_spec_F77='${wl}-rpath ${wl}$libdir'
-      else
-	allow_undefined_flag_F77=' -expect_unresolved \*'
-	archive_cmds_F77='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-	archive_expsym_cmds_F77='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~
-	$LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~$rm $lib.exp'
 
-	# Both c and cxx compiler support -rpath directly
-	hardcode_libdir_flag_spec_F77='-rpath $libdir'
-      fi
-      hardcode_libdir_separator_F77=:
-      ;;
 
-    solaris*)
-      no_undefined_flag_F77=' -z text'
-      if test "$GCC" = yes; then
-	wlarc='${wl}'
-	archive_cmds_F77='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-	archive_expsym_cmds_F77='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-	  $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp'
-      else
-	wlarc=''
-	archive_cmds_F77='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
-	archive_expsym_cmds_F77='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-  	$LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
-      fi
-      hardcode_libdir_flag_spec_F77='-R$libdir'
-      hardcode_shlibpath_var_F77=no
-      case $host_os in
-      solaris2.[0-5] | solaris2.[0-5].*) ;;
-      *)
-	# The compiler driver will combine and reorder linker options,
-	# but understands `-z linker_flag'.  GCC discards it without `$wl',
-	# but is careful enough not to reorder.
- 	# Supported since Solaris 2.6 (maybe 2.5.1?)
-	if test "$GCC" = yes; then
-	  whole_archive_flag_spec_F77='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
-	else
-	  whole_archive_flag_spec_F77='-z allextract$convenience -z defaultextract'
-	fi
-	;;
-      esac
-      link_all_deplibs_F77=yes
-      ;;
 
-    sunos4*)
-      if test "x$host_vendor" = xsequent; then
-	# Use $CC to link under sequent, because it throws in some extra .o
-	# files that make .init and .fini sections work.
-	archive_cmds_F77='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
-      else
-	archive_cmds_F77='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
-      fi
-      hardcode_libdir_flag_spec_F77='-L$libdir'
-      hardcode_direct_F77=yes
-      hardcode_minus_L_F77=yes
-      hardcode_shlibpath_var_F77=no
-      ;;
 
-    sysv4)
-      case $host_vendor in
-	sni)
-	  archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-	  hardcode_direct_F77=yes # is this really true???
-	;;
-	siemens)
-	  ## LD is ld it makes a PLAMLIB
-	  ## CC just makes a GrossModule.
-	  archive_cmds_F77='$LD -G -o $lib $libobjs $deplibs $linker_flags'
-	  reload_cmds_F77='$CC -r -o $output$reload_objs'
-	  hardcode_direct_F77=no
-        ;;
-	motorola)
-	  archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-	  hardcode_direct_F77=no #Motorola manual says yes, but my tests say they lie
-	;;
-      esac
-      runpath_var='LD_RUN_PATH'
-      hardcode_shlibpath_var_F77=no
-      ;;
 
-    sysv4.3*)
-      archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-      hardcode_shlibpath_var_F77=no
-      export_dynamic_flag_spec_F77='-Bexport'
-      ;;
+  if test "x$enable_dlopen" != xyes; then
+  enable_dlopen=unknown
+  enable_dlopen_self=unknown
+  enable_dlopen_self_static=unknown
+else
+  lt_cv_dlopen=no
+  lt_cv_dlopen_libs=
 
-    sysv4*MP*)
-      if test -d /usr/nec; then
-	archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-	hardcode_shlibpath_var_F77=no
-	runpath_var=LD_RUN_PATH
-	hardcode_runpath_var=yes
-	ld_shlibs_F77=yes
-      fi
-      ;;
+  case $host_os in
+  beos*)
+    lt_cv_dlopen="load_add_on"
+    lt_cv_dlopen_libs=
+    lt_cv_dlopen_self=yes
+    ;;
 
-    sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*)
-      no_undefined_flag_F77='${wl}-z,text'
-      archive_cmds_need_lc_F77=no
-      hardcode_shlibpath_var_F77=no
-      runpath_var='LD_RUN_PATH'
+  mingw* | pw32* | cegcc*)
+    lt_cv_dlopen="LoadLibrary"
+    lt_cv_dlopen_libs=
+    ;;
 
-      if test "$GCC" = yes; then
-	archive_cmds_F77='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-	archive_expsym_cmds_F77='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-      else
-	archive_cmds_F77='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-	archive_expsym_cmds_F77='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-      fi
-      ;;
+  cygwin*)
+    lt_cv_dlopen="dlopen"
+    lt_cv_dlopen_libs=
+    ;;
 
-    sysv5* | sco3.2v5* | sco5v6*)
-      # Note: We can NOT use -z defs as we might desire, because we do not
-      # link with -lc, and that would cause any symbols used from libc to
-      # always be unresolved, which means just about no library would
-      # ever link correctly.  If we're not using GNU ld we use -z text
-      # though, which does catch some bad symbols but isn't as heavy-handed
-      # as -z defs.
-      no_undefined_flag_F77='${wl}-z,text'
-      allow_undefined_flag_F77='${wl}-z,nodefs'
-      archive_cmds_need_lc_F77=no
-      hardcode_shlibpath_var_F77=no
-      hardcode_libdir_flag_spec_F77='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`'
-      hardcode_libdir_separator_F77=':'
-      link_all_deplibs_F77=yes
-      export_dynamic_flag_spec_F77='${wl}-Bexport'
-      runpath_var='LD_RUN_PATH'
+  darwin*)
+  # if libdl is installed we need to link against it
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5
+$as_echo_n "checking for dlopen in -ldl... " >&6; }
+if test "${ac_cv_lib_dl_dlopen+set}" = set; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-ldl  $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
 
-      if test "$GCC" = yes; then
-	archive_cmds_F77='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
-	archive_expsym_cmds_F77='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
-      else
-	archive_cmds_F77='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
-	archive_expsym_cmds_F77='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
-      fi
-      ;;
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char dlopen ();
+int
+main ()
+{
+return dlopen ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_lib_dl_dlopen=yes
+else
+  ac_cv_lib_dl_dlopen=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5
+$as_echo "$ac_cv_lib_dl_dlopen" >&6; }
+if test "x$ac_cv_lib_dl_dlopen" = x""yes; then :
+  lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
+else
 
-    uts4*)
-      archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-      hardcode_libdir_flag_spec_F77='-L$libdir'
-      hardcode_shlibpath_var_F77=no
-      ;;
+    lt_cv_dlopen="dyld"
+    lt_cv_dlopen_libs=
+    lt_cv_dlopen_self=yes
 
-    *)
-      ld_shlibs_F77=no
-      ;;
-    esac
-  fi
+fi
 
-{ $as_echo "$as_me:$LINENO: result: $ld_shlibs_F77" >&5
-$as_echo "$ld_shlibs_F77" >&6; }
-test "$ld_shlibs_F77" = no && can_build_shared=no
+    ;;
 
-#
-# Do we need to explicitly link libc?
-#
-case "x$archive_cmds_need_lc_F77" in
-x|xyes)
-  # Assume -lc should be added
-  archive_cmds_need_lc_F77=yes
+  *)
+    ac_fn_c_check_func "$LINENO" "shl_load" "ac_cv_func_shl_load"
+if test "x$ac_cv_func_shl_load" = x""yes; then :
+  lt_cv_dlopen="shl_load"
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for shl_load in -ldld" >&5
+$as_echo_n "checking for shl_load in -ldld... " >&6; }
+if test "${ac_cv_lib_dld_shl_load+set}" = set; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-ldld  $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
 
-  if test "$enable_shared" = yes && test "$GCC" = yes; then
-    case $archive_cmds_F77 in
-    *'~'*)
-      # FIXME: we may have to deal with multi-command sequences.
-      ;;
-    '$CC '*)
-      # Test whether the compiler implicitly links with -lc since on some
-      # systems, -lgcc has to come before -lc. If gcc already passes -lc
-      # to ld, don't add -lc before -lgcc.
-      { $as_echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5
-$as_echo_n "checking whether -lc should be explicitly linked in... " >&6; }
-      $rm conftest*
-      echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char shl_load ();
+int
+main ()
+{
+return shl_load ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_lib_dld_shl_load=yes
+else
+  ac_cv_lib_dld_shl_load=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_shl_load" >&5
+$as_echo "$ac_cv_lib_dld_shl_load" >&6; }
+if test "x$ac_cv_lib_dld_shl_load" = x""yes; then :
+  lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld"
+else
+  ac_fn_c_check_func "$LINENO" "dlopen" "ac_cv_func_dlopen"
+if test "x$ac_cv_func_dlopen" = x""yes; then :
+  lt_cv_dlopen="dlopen"
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5
+$as_echo_n "checking for dlopen in -ldl... " >&6; }
+if test "${ac_cv_lib_dl_dlopen+set}" = set; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-ldl  $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
 
-      if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } 2>conftest.err; then
-        soname=conftest
-        lib=conftest
-        libobjs=conftest.$ac_objext
-        deplibs=
-        wl=$lt_prog_compiler_wl_F77
-	pic_flag=$lt_prog_compiler_pic_F77
-        compiler_flags=-v
-        linker_flags=-v
-        verstring=
-        output_objdir=.
-        libname=conftest
-        lt_save_allow_undefined_flag=$allow_undefined_flag_F77
-        allow_undefined_flag_F77=
-        if { (eval echo "$as_me:$LINENO: \"$archive_cmds_F77 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1\"") >&5
-  (eval $archive_cmds_F77 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) 2>&5
-  ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }
-        then
-	  archive_cmds_need_lc_F77=no
-        else
-	  archive_cmds_need_lc_F77=yes
-        fi
-        allow_undefined_flag_F77=$lt_save_allow_undefined_flag
-      else
-        cat conftest.err 1>&5
-      fi
-      $rm conftest*
-      { $as_echo "$as_me:$LINENO: result: $archive_cmds_need_lc_F77" >&5
-$as_echo "$archive_cmds_need_lc_F77" >&6; }
-      ;;
-    esac
-  fi
-  ;;
-esac
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char dlopen ();
+int
+main ()
+{
+return dlopen ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_lib_dl_dlopen=yes
+else
+  ac_cv_lib_dl_dlopen=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5
+$as_echo "$ac_cv_lib_dl_dlopen" >&6; }
+if test "x$ac_cv_lib_dl_dlopen" = x""yes; then :
+  lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -lsvld" >&5
+$as_echo_n "checking for dlopen in -lsvld... " >&6; }
+if test "${ac_cv_lib_svld_dlopen+set}" = set; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-lsvld  $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
 
-{ $as_echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5
-$as_echo_n "checking dynamic linker characteristics... " >&6; }
-library_names_spec=
-libname_spec='lib$name'
-soname_spec=
-shrext_cmds=".so"
-postinstall_cmds=
-postuninstall_cmds=
-finish_cmds=
-finish_eval=
-shlibpath_var=
-shlibpath_overrides_runpath=unknown
-version_type=none
-dynamic_linker="$host_os ld.so"
-sys_lib_dlsearch_path_spec="/lib /usr/lib"
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char dlopen ();
+int
+main ()
+{
+return dlopen ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_lib_svld_dlopen=yes
+else
+  ac_cv_lib_svld_dlopen=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_svld_dlopen" >&5
+$as_echo "$ac_cv_lib_svld_dlopen" >&6; }
+if test "x$ac_cv_lib_svld_dlopen" = x""yes; then :
+  lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dld_link in -ldld" >&5
+$as_echo_n "checking for dld_link in -ldld... " >&6; }
+if test "${ac_cv_lib_dld_dld_link+set}" = set; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-ldld  $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
 
-need_lib_prefix=unknown
-hardcode_into_libs=no
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char dld_link ();
+int
+main ()
+{
+return dld_link ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_lib_dld_dld_link=yes
+else
+  ac_cv_lib_dld_dld_link=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_dld_link" >&5
+$as_echo "$ac_cv_lib_dld_dld_link" >&6; }
+if test "x$ac_cv_lib_dld_dld_link" = x""yes; then :
+  lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld"
+fi
 
-# when you set need_version to no, make sure it does not cause -set_version
-# flags to be left without arguments
-need_version=unknown
 
-case $host_os in
-aix3*)
-  version_type=linux
-  library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
-  shlibpath_var=LIBPATH
+fi
 
-  # AIX 3 has no versioning support, so we append a major version to the name.
-  soname_spec='${libname}${release}${shared_ext}$major'
-  ;;
 
-aix[4-9]*)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  hardcode_into_libs=yes
-  if test "$host_cpu" = ia64; then
-    # AIX 5 supports IA64
-    library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
-    shlibpath_var=LD_LIBRARY_PATH
-  else
-    # With GCC up to 2.95.x, collect2 would create an import file
-    # for dependence libraries.  The import file would start with
-    # the line `#! .'.  This would cause the generated library to
-    # depend on `.', always an invalid library.  This was fixed in
-    # development snapshots of GCC prior to 3.0.
-    case $host_os in
-      aix4 | aix4.[01] | aix4.[01].*)
-      if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
-	   echo ' yes '
-	   echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then
-	:
-      else
-	can_build_shared=no
-      fi
-      ;;
-    esac
-    # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
-    # soname into executable. Probably we can add versioning support to
-    # collect2, so additional links can be useful in future.
-    if test "$aix_use_runtimelinking" = yes; then
-      # If using run time linking (on AIX 4.2 or later) use lib<name>.so
-      # instead of lib<name>.a to let people know that these are not
-      # typical AIX shared libraries.
-      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-    else
-      # We preserve .a as extension for shared libraries through AIX4.2
-      # and later when we are not doing run time linking.
-      library_names_spec='${libname}${release}.a $libname.a'
-      soname_spec='${libname}${release}${shared_ext}$major'
-    fi
-    shlibpath_var=LIBPATH
-  fi
-  ;;
+fi
 
-amigaos*)
-  library_names_spec='$libname.ixlibrary $libname.a'
-  # Create ${libname}_ixlibrary.a entries in /sys/libs.
-  finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
-  ;;
 
-beos*)
-  library_names_spec='${libname}${shared_ext}'
-  dynamic_linker="$host_os ld.so"
-  shlibpath_var=LIBRARY_PATH
-  ;;
+fi
 
-bsdi[45]*)
-  version_type=linux
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
-  shlibpath_var=LD_LIBRARY_PATH
-  sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
-  sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
-  # the default ld.so.conf also contains /usr/contrib/lib and
-  # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
-  # libtool to hard-code these into programs
-  ;;
 
-cygwin* | mingw* | pw32*)
-  version_type=windows
-  shrext_cmds=".dll"
-  need_version=no
-  need_lib_prefix=no
+fi
 
-  case $GCC,$host_os in
-  yes,cygwin* | yes,mingw* | yes,pw32*)
-    library_names_spec='$libname.dll.a'
-    # DLL is installed to $(libdir)/../bin by postinstall_cmds
-    postinstall_cmds='base_file=`basename \${file}`~
-      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~
-      dldir=$destdir/`dirname \$dlpath`~
-      test -d \$dldir || mkdir -p \$dldir~
-      $install_prog $dir/$dlname \$dldir/$dlname~
-      chmod a+x \$dldir/$dlname'
-    postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
-      dlpath=$dir/\$dldll~
-       $rm \$dlpath'
-    shlibpath_overrides_runpath=yes
 
-    case $host_os in
-    cygwin*)
-      # Cygwin DLLs use 'cyg' prefix rather than 'lib'
-      soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
-      sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib"
-      ;;
-    mingw*)
-      # MinGW DLLs use traditional 'lib' prefix
-      soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
-      sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
-      if echo "$sys_lib_search_path_spec" | grep ';[c-zC-Z]:/' >/dev/null; then
-        # It is most probably a Windows format PATH printed by
-        # mingw gcc, but we are running on Cygwin. Gcc prints its search
-        # path with ; separators, and with drive letters. We can handle the
-        # drive letters (cygwin fileutils understands them), so leave them,
-        # especially as we might pass files found there to a mingw objdump,
-        # which wouldn't understand a cygwinified path. Ahh.
-        sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
-      else
-        sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED  -e "s/$PATH_SEPARATOR/ /g"`
-      fi
-      ;;
-    pw32*)
-      # pw32 DLLs use 'pw' prefix rather than 'lib'
-      library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
-      ;;
-    esac
-    ;;
+fi
 
-  *)
-    library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib'
     ;;
   esac
-  dynamic_linker='Win32 ld.exe'
-  # FIXME: first we should search . and the directory the executable is in
-  shlibpath_var=PATH
-  ;;
 
-darwin* | rhapsody*)
-  dynamic_linker="$host_os dyld"
-  version_type=darwin
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext'
-  soname_spec='${libname}${release}${major}$shared_ext'
-  shlibpath_overrides_runpath=yes
-  shlibpath_var=DYLD_LIBRARY_PATH
-  shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
+  if test "x$lt_cv_dlopen" != xno; then
+    enable_dlopen=yes
+  else
+    enable_dlopen=no
+  fi
 
-  sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
-  ;;
+  case $lt_cv_dlopen in
+  dlopen)
+    save_CPPFLAGS="$CPPFLAGS"
+    test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
 
-dgux*)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  ;;
+    save_LDFLAGS="$LDFLAGS"
+    wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
 
-freebsd1*)
-  dynamic_linker=no
-  ;;
+    save_LIBS="$LIBS"
+    LIBS="$lt_cv_dlopen_libs $LIBS"
 
-freebsd* | dragonfly*)
-  # DragonFly does not have aout.  When/if they implement a new
-  # versioning mechanism, adjust this.
-  if test -x /usr/bin/objformat; then
-    objformat=`/usr/bin/objformat`
-  else
-    case $host_os in
-    freebsd[123]*) objformat=aout ;;
-    *) objformat=elf ;;
-    esac
-  fi
-  version_type=freebsd-$objformat
-  case $version_type in
-    freebsd-elf*)
-      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
-      need_version=no
-      need_lib_prefix=no
-      ;;
-    freebsd-*)
-      library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
-      need_version=yes
-      ;;
-  esac
-  shlibpath_var=LD_LIBRARY_PATH
-  case $host_os in
-  freebsd2*)
-    shlibpath_overrides_runpath=yes
-    ;;
-  freebsd3.[01]* | freebsdelf3.[01]*)
-    shlibpath_overrides_runpath=yes
-    hardcode_into_libs=yes
-    ;;
-  freebsd3.[2-9]* | freebsdelf3.[2-9]* | \
-  freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1)
-    shlibpath_overrides_runpath=no
-    hardcode_into_libs=yes
-    ;;
-  *) # from 4.6 on, and DragonFly
-    shlibpath_overrides_runpath=yes
-    hardcode_into_libs=yes
-    ;;
-  esac
-  ;;
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a program can dlopen itself" >&5
+$as_echo_n "checking whether a program can dlopen itself... " >&6; }
+if test "${lt_cv_dlopen_self+set}" = set; then :
+  $as_echo_n "(cached) " >&6
+else
+  	  if test "$cross_compiling" = yes; then :
+  lt_cv_dlopen_self=cross
+else
+  lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
+  lt_status=$lt_dlunknown
+  cat > conftest.$ac_ext <<_LT_EOF
+#line 11778 "configure"
+#include "confdefs.h"
 
-gnu*)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  hardcode_into_libs=yes
-  ;;
+#if HAVE_DLFCN_H
+#include <dlfcn.h>
+#endif
 
-hpux9* | hpux10* | hpux11*)
-  # Give a soname corresponding to the major version so that dld.sl refuses to
-  # link against other versions.
-  version_type=sunos
-  need_lib_prefix=no
-  need_version=no
-  case $host_cpu in
-  ia64*)
-    shrext_cmds='.so'
-    hardcode_into_libs=yes
-    dynamic_linker="$host_os dld.so"
-    shlibpath_var=LD_LIBRARY_PATH
-    shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
-    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-    soname_spec='${libname}${release}${shared_ext}$major'
-    if test "X$HPUX_IA64_MODE" = X32; then
-      sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
-    else
-      sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
-    fi
-    sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
-    ;;
-   hppa*64*)
-     shrext_cmds='.sl'
-     hardcode_into_libs=yes
-     dynamic_linker="$host_os dld.sl"
-     shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
-     shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
-     library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-     soname_spec='${libname}${release}${shared_ext}$major'
-     sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
-     sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
-     ;;
-   *)
-    shrext_cmds='.sl'
-    dynamic_linker="$host_os dld.sl"
-    shlibpath_var=SHLIB_PATH
-    shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
-    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-    soname_spec='${libname}${release}${shared_ext}$major'
-    ;;
-  esac
-  # HP-UX runs *really* slowly unless shared libraries are mode 555.
-  postinstall_cmds='chmod 555 $lib'
-  ;;
+#include <stdio.h>
 
-interix[3-9]*)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=no
-  hardcode_into_libs=yes
-  ;;
+#ifdef RTLD_GLOBAL
+#  define LT_DLGLOBAL		RTLD_GLOBAL
+#else
+#  ifdef DL_GLOBAL
+#    define LT_DLGLOBAL		DL_GLOBAL
+#  else
+#    define LT_DLGLOBAL		0
+#  endif
+#endif
 
-irix5* | irix6* | nonstopux*)
-  case $host_os in
-    nonstopux*) version_type=nonstopux ;;
-    *)
-	if test "$lt_cv_prog_gnu_ld" = yes; then
-		version_type=linux
-	else
-		version_type=irix
-	fi ;;
-  esac
-  need_lib_prefix=no
-  need_version=no
-  soname_spec='${libname}${release}${shared_ext}$major'
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
-  case $host_os in
-  irix5* | nonstopux*)
-    libsuff= shlibsuff=
-    ;;
-  *)
-    case $LD in # libtool.m4 will add one of these switches to LD
-    *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
-      libsuff= shlibsuff= libmagic=32-bit;;
-    *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
-      libsuff=32 shlibsuff=N32 libmagic=N32;;
-    *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
-      libsuff=64 shlibsuff=64 libmagic=64-bit;;
-    *) libsuff= shlibsuff= libmagic=never-match;;
-    esac
-    ;;
-  esac
-  shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
-  shlibpath_overrides_runpath=no
-  sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
-  sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
-  hardcode_into_libs=yes
-  ;;
+/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
+   find out it does not work in some platform. */
+#ifndef LT_DLLAZY_OR_NOW
+#  ifdef RTLD_LAZY
+#    define LT_DLLAZY_OR_NOW		RTLD_LAZY
+#  else
+#    ifdef DL_LAZY
+#      define LT_DLLAZY_OR_NOW		DL_LAZY
+#    else
+#      ifdef RTLD_NOW
+#        define LT_DLLAZY_OR_NOW	RTLD_NOW
+#      else
+#        ifdef DL_NOW
+#          define LT_DLLAZY_OR_NOW	DL_NOW
+#        else
+#          define LT_DLLAZY_OR_NOW	0
+#        endif
+#      endif
+#    endif
+#  endif
+#endif
 
-# No shared lib support for Linux oldld, aout, or coff.
-linux*oldld* | linux*aout* | linux*coff*)
-  dynamic_linker=no
-  ;;
+void fnord() { int i=42;}
+int main ()
+{
+  void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
+  int status = $lt_dlunknown;
 
-# This must be Linux ELF.
-linux* | k*bsd*-gnu)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=no
-  # This implies no fast_install, which is unacceptable.
-  # Some rework will be needed to allow for fast_install
-  # before this can be enabled.
-  hardcode_into_libs=yes
+  if (self)
+    {
+      if (dlsym (self,"fnord"))       status = $lt_dlno_uscore;
+      else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
+      /* dlclose (self); */
+    }
+  else
+    puts (dlerror ());
 
-  # find out which ABI we are using
-  libsuff=
-  case "$host_cpu" in
-  x86_64*|s390x*|powerpc64*)
-    echo '#line 16830 "configure"' > conftest.$ac_ext
-    if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
+  return status;
+}
+_LT_EOF
+  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5
+  (eval $ac_link) 2>&5
   ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; then
-      case `/usr/bin/file conftest.$ac_objext` in
-      *64-bit*)
-        libsuff=64
-        ;;
-      esac
-    fi
-    rm -rf conftest*
-    ;;
-  esac
-
-  sys_lib_dlsearch_path_spec="/lib${libsuff} /usr/lib${libsuff}"
-
-  # Append ld.so.conf contents to the search path
-  if test -f /etc/ld.so.conf; then
-    lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ 	]*hwcap[ 	]/d;s/[:,	]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
-    sys_lib_dlsearch_path_spec="$sys_lib_dlsearch_path_spec $lt_ld_extra"
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } && test -s conftest${ac_exeext} 2>/dev/null; then
+    (./conftest; exit; ) >&5 2>/dev/null
+    lt_status=$?
+    case x$lt_status in
+      x$lt_dlno_uscore) lt_cv_dlopen_self=yes ;;
+      x$lt_dlneed_uscore) lt_cv_dlopen_self=yes ;;
+      x$lt_dlunknown|x*) lt_cv_dlopen_self=no ;;
+    esac
+  else :
+    # compilation failed
+    lt_cv_dlopen_self=no
   fi
+fi
+rm -fr conftest*
 
-  # We used to test for /lib/ld.so.1 and disable shared libraries on
-  # powerpc, because MkLinux only supported shared libraries with the
-  # GNU dynamic linker.  Since this was broken with cross compilers,
-  # most powerpc-linux boxes support dynamic linking these days and
-  # people can always --disable-shared, the test was removed, and we
-  # assume the GNU/Linux dynamic linker is in use.
-  dynamic_linker='GNU/Linux ld.so'
-  ;;
 
-netbsd*)
-  version_type=sunos
-  need_lib_prefix=no
-  need_version=no
-  if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
-    finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
-    dynamic_linker='NetBSD (a.out) ld.so'
-  else
-    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
-    soname_spec='${libname}${release}${shared_ext}$major'
-    dynamic_linker='NetBSD ld.elf_so'
-  fi
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
-  hardcode_into_libs=yes
-  ;;
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_dlopen_self" >&5
+$as_echo "$lt_cv_dlopen_self" >&6; }
 
-newsos6)
-  version_type=linux
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
-  ;;
+    if test "x$lt_cv_dlopen_self" = xyes; then
+      wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\"
+      { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a statically linked program can dlopen itself" >&5
+$as_echo_n "checking whether a statically linked program can dlopen itself... " >&6; }
+if test "${lt_cv_dlopen_self_static+set}" = set; then :
+  $as_echo_n "(cached) " >&6
+else
+  	  if test "$cross_compiling" = yes; then :
+  lt_cv_dlopen_self_static=cross
+else
+  lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
+  lt_status=$lt_dlunknown
+  cat > conftest.$ac_ext <<_LT_EOF
+#line 11874 "configure"
+#include "confdefs.h"
 
-nto-qnx*)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
-  ;;
+#if HAVE_DLFCN_H
+#include <dlfcn.h>
+#endif
 
-openbsd*)
-  version_type=sunos
-  sys_lib_dlsearch_path_spec="/usr/lib"
-  need_lib_prefix=no
-  # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
-  case $host_os in
-    openbsd3.3 | openbsd3.3.*) need_version=yes ;;
-    *)                         need_version=no  ;;
-  esac
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
-  finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
-  shlibpath_var=LD_LIBRARY_PATH
-  if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-    case $host_os in
-      openbsd2.[89] | openbsd2.[89].*)
-	shlibpath_overrides_runpath=no
-	;;
-      *)
-	shlibpath_overrides_runpath=yes
-	;;
-      esac
-  else
-    shlibpath_overrides_runpath=yes
-  fi
-  ;;
+#include <stdio.h>
 
-os2*)
-  libname_spec='$name'
-  shrext_cmds=".dll"
-  need_lib_prefix=no
-  library_names_spec='$libname${shared_ext} $libname.a'
-  dynamic_linker='OS/2 ld.exe'
-  shlibpath_var=LIBPATH
-  ;;
+#ifdef RTLD_GLOBAL
+#  define LT_DLGLOBAL		RTLD_GLOBAL
+#else
+#  ifdef DL_GLOBAL
+#    define LT_DLGLOBAL		DL_GLOBAL
+#  else
+#    define LT_DLGLOBAL		0
+#  endif
+#endif
 
-osf3* | osf4* | osf5*)
-  version_type=osf
-  need_lib_prefix=no
-  need_version=no
-  soname_spec='${libname}${release}${shared_ext}$major'
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  shlibpath_var=LD_LIBRARY_PATH
-  sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
-  sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
-  ;;
+/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
+   find out it does not work in some platform. */
+#ifndef LT_DLLAZY_OR_NOW
+#  ifdef RTLD_LAZY
+#    define LT_DLLAZY_OR_NOW		RTLD_LAZY
+#  else
+#    ifdef DL_LAZY
+#      define LT_DLLAZY_OR_NOW		DL_LAZY
+#    else
+#      ifdef RTLD_NOW
+#        define LT_DLLAZY_OR_NOW	RTLD_NOW
+#      else
+#        ifdef DL_NOW
+#          define LT_DLLAZY_OR_NOW	DL_NOW
+#        else
+#          define LT_DLLAZY_OR_NOW	0
+#        endif
+#      endif
+#    endif
+#  endif
+#endif
 
-rdos*)
-  dynamic_linker=no
-  ;;
+void fnord() { int i=42;}
+int main ()
+{
+  void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
+  int status = $lt_dlunknown;
 
-solaris*)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
-  hardcode_into_libs=yes
-  # ldd complains unless libraries are executable
-  postinstall_cmds='chmod +x $lib'
-  ;;
+  if (self)
+    {
+      if (dlsym (self,"fnord"))       status = $lt_dlno_uscore;
+      else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
+      /* dlclose (self); */
+    }
+  else
+    puts (dlerror ());
 
-sunos4*)
-  version_type=sunos
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
-  finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
-  if test "$with_gnu_ld" = yes; then
-    need_lib_prefix=no
+  return status;
+}
+_LT_EOF
+  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5
+  (eval $ac_link) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } && test -s conftest${ac_exeext} 2>/dev/null; then
+    (./conftest; exit; ) >&5 2>/dev/null
+    lt_status=$?
+    case x$lt_status in
+      x$lt_dlno_uscore) lt_cv_dlopen_self_static=yes ;;
+      x$lt_dlneed_uscore) lt_cv_dlopen_self_static=yes ;;
+      x$lt_dlunknown|x*) lt_cv_dlopen_self_static=no ;;
+    esac
+  else :
+    # compilation failed
+    lt_cv_dlopen_self_static=no
   fi
-  need_version=yes
-  ;;
+fi
+rm -fr conftest*
 
-sysv4 | sysv4.3*)
-  version_type=linux
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  case $host_vendor in
-    sni)
-      shlibpath_overrides_runpath=no
-      need_lib_prefix=no
-      export_dynamic_flag_spec='${wl}-Blargedynsym'
-      runpath_var=LD_RUN_PATH
-      ;;
-    siemens)
-      need_lib_prefix=no
-      ;;
-    motorola)
-      need_lib_prefix=no
-      need_version=no
-      shlibpath_overrides_runpath=no
-      sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
-      ;;
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_dlopen_self_static" >&5
+$as_echo "$lt_cv_dlopen_self_static" >&6; }
+    fi
+
+    CPPFLAGS="$save_CPPFLAGS"
+    LDFLAGS="$save_LDFLAGS"
+    LIBS="$save_LIBS"
+    ;;
   esac
-  ;;
 
-sysv4*MP*)
-  if test -d /usr/nec ;then
-    version_type=linux
-    library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
-    soname_spec='$libname${shared_ext}.$major'
-    shlibpath_var=LD_LIBRARY_PATH
-  fi
-  ;;
+  case $lt_cv_dlopen_self in
+  yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;;
+  *) enable_dlopen_self=unknown ;;
+  esac
 
-sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
-  version_type=freebsd-elf
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  hardcode_into_libs=yes
-  if test "$with_gnu_ld" = yes; then
-    sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
-    shlibpath_overrides_runpath=no
-  else
-    sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
-    shlibpath_overrides_runpath=yes
-    case $host_os in
-      sco3.2v5*)
-        sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
-	;;
-    esac
-  fi
-  sys_lib_dlsearch_path_spec='/usr/lib'
-  ;;
+  case $lt_cv_dlopen_self_static in
+  yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;;
+  *) enable_dlopen_self_static=unknown ;;
+  esac
+fi
 
-uts4*)
-  version_type=linux
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  ;;
 
-*)
-  dynamic_linker=no
-  ;;
-esac
-{ $as_echo "$as_me:$LINENO: result: $dynamic_linker" >&5
-$as_echo "$dynamic_linker" >&6; }
-test "$dynamic_linker" = no && can_build_shared=no
 
-if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
-  lt_cv_sys_lib_search_path_spec="$sys_lib_search_path_spec"
-fi
 
-sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec"
-if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
-  lt_cv_sys_lib_dlsearch_path_spec="$sys_lib_dlsearch_path_spec"
-fi
-
-sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec"
-
-variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
-if test "$GCC" = yes; then
-  variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
-fi
-
-{ $as_echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5
-$as_echo_n "checking how to hardcode library paths into programs... " >&6; }
-hardcode_action_F77=
-if test -n "$hardcode_libdir_flag_spec_F77" || \
-   test -n "$runpath_var_F77" || \
-   test "X$hardcode_automatic_F77" = "Xyes" ; then
-
-  # We can hardcode non-existant directories.
-  if test "$hardcode_direct_F77" != no &&
-     # If the only mechanism to avoid hardcoding is shlibpath_var, we
-     # have to relink, otherwise we might link with an installed library
-     # when we should be linking with a yet-to-be-installed one
-     ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, F77)" != no &&
-     test "$hardcode_minus_L_F77" != no; then
-    # Linking always hardcodes the temporary library directory.
-    hardcode_action_F77=relink
-  else
-    # We can link without hardcoding, and we can hardcode nonexisting dirs.
-    hardcode_action_F77=immediate
-  fi
-else
-  # We cannot hardcode anything, or else we can only hardcode existing
-  # directories.
-  hardcode_action_F77=unsupported
-fi
-{ $as_echo "$as_me:$LINENO: result: $hardcode_action_F77" >&5
-$as_echo "$hardcode_action_F77" >&6; }
-
-if test "$hardcode_action_F77" = relink; then
-  # Fast installation is not supported
-  enable_fast_install=no
-elif test "$shlibpath_overrides_runpath" = yes ||
-     test "$enable_shared" = no; then
-  # Fast installation is not necessary
-  enable_fast_install=needless
-fi
-
-
-# The else clause should only fire when bootstrapping the
-# libtool distribution, otherwise you forgot to ship ltmain.sh
-# with your package, and you will get complaints that there are
-# no rules to generate ltmain.sh.
-if test -f "$ltmain"; then
-  # See if we are running on zsh, and set the options which allow our commands through
-  # without removal of \ escapes.
-  if test -n "${ZSH_VERSION+set}" ; then
-    setopt NO_GLOB_SUBST
-  fi
-  # Now quote all the things that may contain metacharacters while being
-  # careful not to overquote the AC_SUBSTed values.  We take copies of the
-  # variables and quote the copies for generation of the libtool script.
-  for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \
-    SED SHELL STRIP \
-    libname_spec library_names_spec soname_spec extract_expsyms_cmds \
-    old_striplib striplib file_magic_cmd finish_cmds finish_eval \
-    deplibs_check_method reload_flag reload_cmds need_locks \
-    lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \
-    lt_cv_sys_global_symbol_to_c_name_address \
-    sys_lib_search_path_spec sys_lib_dlsearch_path_spec \
-    old_postinstall_cmds old_postuninstall_cmds \
-    compiler_F77 \
-    CC_F77 \
-    LD_F77 \
-    lt_prog_compiler_wl_F77 \
-    lt_prog_compiler_pic_F77 \
-    lt_prog_compiler_static_F77 \
-    lt_prog_compiler_no_builtin_flag_F77 \
-    export_dynamic_flag_spec_F77 \
-    thread_safe_flag_spec_F77 \
-    whole_archive_flag_spec_F77 \
-    enable_shared_with_static_runtimes_F77 \
-    old_archive_cmds_F77 \
-    old_archive_from_new_cmds_F77 \
-    predep_objects_F77 \
-    postdep_objects_F77 \
-    predeps_F77 \
-    postdeps_F77 \
-    compiler_lib_search_path_F77 \
-    compiler_lib_search_dirs_F77 \
-    archive_cmds_F77 \
-    archive_expsym_cmds_F77 \
-    postinstall_cmds_F77 \
-    postuninstall_cmds_F77 \
-    old_archive_from_expsyms_cmds_F77 \
-    allow_undefined_flag_F77 \
-    no_undefined_flag_F77 \
-    export_symbols_cmds_F77 \
-    hardcode_libdir_flag_spec_F77 \
-    hardcode_libdir_flag_spec_ld_F77 \
-    hardcode_libdir_separator_F77 \
-    hardcode_automatic_F77 \
-    module_cmds_F77 \
-    module_expsym_cmds_F77 \
-    lt_cv_prog_compiler_c_o_F77 \
-    fix_srcfile_path_F77 \
-    exclude_expsyms_F77 \
-    include_expsyms_F77; do
-
-    case $var in
-    old_archive_cmds_F77 | \
-    old_archive_from_new_cmds_F77 | \
-    archive_cmds_F77 | \
-    archive_expsym_cmds_F77 | \
-    module_cmds_F77 | \
-    module_expsym_cmds_F77 | \
-    old_archive_from_expsyms_cmds_F77 | \
-    export_symbols_cmds_F77 | \
-    extract_expsyms_cmds | reload_cmds | finish_cmds | \
-    postinstall_cmds | postuninstall_cmds | \
-    old_postinstall_cmds | old_postuninstall_cmds | \
-    sys_lib_search_path_spec | sys_lib_dlsearch_path_spec)
-      # Double-quote double-evaled strings.
-      eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\""
-      ;;
-    *)
-      eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\""
-      ;;
-    esac
-  done
-
-  case $lt_echo in
-  *'\$0 --fallback-echo"')
-    lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'`
-    ;;
-  esac
-
-cfgfile="$ofile"
-
-  cat <<__EOF__ >> "$cfgfile"
-# ### BEGIN LIBTOOL TAG CONFIG: $tagname
-
-# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
-
-# Shell to use when invoking shell scripts.
-SHELL=$lt_SHELL
-
-# Whether or not to build shared libraries.
-build_libtool_libs=$enable_shared
-
-# Whether or not to build static libraries.
-build_old_libs=$enable_static
-
-# Whether or not to add -lc for building shared libraries.
-build_libtool_need_lc=$archive_cmds_need_lc_F77
-
-# Whether or not to disallow shared libs when runtime libs are static
-allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes_F77
-
-# Whether or not to optimize for fast installation.
-fast_install=$enable_fast_install
-
-# The host system.
-host_alias=$host_alias
-host=$host
-host_os=$host_os
-
-# The build system.
-build_alias=$build_alias
-build=$build
-build_os=$build_os
-
-# An echo program that does not interpret backslashes.
-echo=$lt_echo
 
-# The archiver.
-AR=$lt_AR
-AR_FLAGS=$lt_AR_FLAGS
 
-# A C compiler.
-LTCC=$lt_LTCC
 
-# LTCC compiler flags.
-LTCFLAGS=$lt_LTCFLAGS
 
-# A language-specific compiler.
-CC=$lt_compiler_F77
 
-# Is the compiler the GNU C compiler?
-with_gcc=$GCC_F77
 
-# An ERE matcher.
-EGREP=$lt_EGREP
 
-# The linker used to build libraries.
-LD=$lt_LD_F77
 
-# Whether we need hard or soft links.
-LN_S=$lt_LN_S
 
-# A BSD-compatible nm program.
-NM=$lt_NM
 
-# A symbol stripping program
-STRIP=$lt_STRIP
 
-# Used to examine libraries when file_magic_cmd begins "file"
-MAGIC_CMD=$MAGIC_CMD
 
-# Used on cygwin: DLL creation program.
-DLLTOOL="$DLLTOOL"
 
-# Used on cygwin: object dumper.
-OBJDUMP="$OBJDUMP"
+striplib=
+old_striplib=
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether stripping libraries is possible" >&5
+$as_echo_n "checking whether stripping libraries is possible... " >&6; }
+if test -n "$STRIP" && $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then
+  test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
+  test -z "$striplib" && striplib="$STRIP --strip-unneeded"
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+else
+# FIXME - insert some real tests, host_os isn't really good enough
+  case $host_os in
+  darwin*)
+    if test -n "$STRIP" ; then
+      striplib="$STRIP -x"
+      old_striplib="$STRIP -S"
+      { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+    else
+      { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+    fi
+    ;;
+  *)
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+    ;;
+  esac
+fi
 
-# Used on cygwin: assembler.
-AS="$AS"
 
-# The name of the directory that contains temporary libtool files.
-objdir=$objdir
 
-# How to create reloadable object files.
-reload_flag=$lt_reload_flag
-reload_cmds=$lt_reload_cmds
 
-# How to pass a linker flag through the compiler.
-wl=$lt_lt_prog_compiler_wl_F77
 
-# Object file suffix (normally "o").
-objext="$ac_objext"
 
-# Old archive suffix (normally "a").
-libext="$libext"
 
-# Shared library suffix (normally ".so").
-shrext_cmds='$shrext_cmds'
 
-# Executable file suffix (normally "").
-exeext="$exeext"
 
-# Additional compiler flags for building library objects.
-pic_flag=$lt_lt_prog_compiler_pic_F77
-pic_mode=$pic_mode
 
-# What is the maximum length of a command?
-max_cmd_len=$lt_cv_sys_max_cmd_len
 
-# Does compiler simultaneously support -c and -o options?
-compiler_c_o=$lt_lt_cv_prog_compiler_c_o_F77
 
-# Must we lock files when doing compilation?
-need_locks=$lt_need_locks
+  # Report which library types will actually be built
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if libtool supports shared libraries" >&5
+$as_echo_n "checking if libtool supports shared libraries... " >&6; }
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $can_build_shared" >&5
+$as_echo "$can_build_shared" >&6; }
 
-# Do we need the lib prefix for modules?
-need_lib_prefix=$need_lib_prefix
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build shared libraries" >&5
+$as_echo_n "checking whether to build shared libraries... " >&6; }
+  test "$can_build_shared" = "no" && enable_shared=no
 
-# Do we need a version for libraries?
-need_version=$need_version
+  # On AIX, shared libraries and static libraries use the same namespace, and
+  # are all built from PIC.
+  case $host_os in
+  aix3*)
+    test "$enable_shared" = yes && enable_static=no
+    if test -n "$RANLIB"; then
+      archive_cmds="$archive_cmds~\$RANLIB \$lib"
+      postinstall_cmds='$RANLIB $lib'
+    fi
+    ;;
 
-# Whether dlopen is supported.
-dlopen_support=$enable_dlopen
+  aix[4-9]*)
+    if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
+      test "$enable_shared" = yes && enable_static=no
+    fi
+    ;;
+  esac
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_shared" >&5
+$as_echo "$enable_shared" >&6; }
 
-# Whether dlopen of programs is supported.
-dlopen_self=$enable_dlopen_self
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build static libraries" >&5
+$as_echo_n "checking whether to build static libraries... " >&6; }
+  # Make sure either enable_shared or enable_static is yes.
+  test "$enable_shared" = yes || enable_static=yes
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_static" >&5
+$as_echo "$enable_static" >&6; }
 
-# Whether dlopen of statically linked programs is supported.
-dlopen_self_static=$enable_dlopen_self_static
 
-# Compiler flag to prevent dynamic linking.
-link_static_flag=$lt_lt_prog_compiler_static_F77
 
-# Compiler flag to turn off builtin functions.
-no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_F77
 
-# Compiler flag to allow reflexive dlopens.
-export_dynamic_flag_spec=$lt_export_dynamic_flag_spec_F77
+fi
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
 
-# Compiler flag to generate shared objects directly from archives.
-whole_archive_flag_spec=$lt_whole_archive_flag_spec_F77
+CC="$lt_save_CC"
 
-# Compiler flag to generate thread-safe objects.
-thread_safe_flag_spec=$lt_thread_safe_flag_spec_F77
 
-# Library versioning type.
-version_type=$version_type
+ac_ext=cpp
+ac_cpp='$CXXCPP $CPPFLAGS'
+ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
 
-# Format of library name prefix.
-libname_spec=$lt_libname_spec
+archive_cmds_need_lc_CXX=no
+allow_undefined_flag_CXX=
+always_export_symbols_CXX=no
+archive_expsym_cmds_CXX=
+compiler_needs_object_CXX=no
+export_dynamic_flag_spec_CXX=
+hardcode_direct_CXX=no
+hardcode_direct_absolute_CXX=no
+hardcode_libdir_flag_spec_CXX=
+hardcode_libdir_flag_spec_ld_CXX=
+hardcode_libdir_separator_CXX=
+hardcode_minus_L_CXX=no
+hardcode_shlibpath_var_CXX=unsupported
+hardcode_automatic_CXX=no
+inherit_rpath_CXX=no
+module_cmds_CXX=
+module_expsym_cmds_CXX=
+link_all_deplibs_CXX=unknown
+old_archive_cmds_CXX=$old_archive_cmds
+no_undefined_flag_CXX=
+whole_archive_flag_spec_CXX=
+enable_shared_with_static_runtimes_CXX=no
 
-# List of archive names.  First name is the real one, the rest are links.
-# The last name is the one that the linker finds with -lNAME.
-library_names_spec=$lt_library_names_spec
+# Source file extension for C++ test sources.
+ac_ext=cpp
 
-# The coded name of the library, if different from the real name.
-soname_spec=$lt_soname_spec
+# Object file extension for compiled C++ test sources.
+objext=o
+objext_CXX=$objext
 
-# Commands used to build and install an old-style archive.
-RANLIB=$lt_RANLIB
-old_archive_cmds=$lt_old_archive_cmds_F77
-old_postinstall_cmds=$lt_old_postinstall_cmds
-old_postuninstall_cmds=$lt_old_postuninstall_cmds
+# No sense in running all these tests if we already determined that
+# the CXX compiler isn't working.  Some variables (like enable_shared)
+# are currently assumed to apply to all compilers on this platform,
+# and will be corrupted by setting them based on a non-working compiler.
+if test "$_lt_caught_CXX_error" != yes; then
+  # Code to be used in simple compile tests
+  lt_simple_compile_test_code="int some_variable = 0;"
 
-# Create an old-style archive from a shared archive.
-old_archive_from_new_cmds=$lt_old_archive_from_new_cmds_F77
+  # Code to be used in simple link tests
+  lt_simple_link_test_code='int main(int, char *[]) { return(0); }'
 
-# Create a temporary old-style archive to link instead of a shared archive.
-old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds_F77
+  # ltmain only uses $CC for tagged configurations so make sure $CC is set.
 
-# Commands used to build and install a shared archive.
-archive_cmds=$lt_archive_cmds_F77
-archive_expsym_cmds=$lt_archive_expsym_cmds_F77
-postinstall_cmds=$lt_postinstall_cmds
-postuninstall_cmds=$lt_postuninstall_cmds
 
-# Commands used to build a loadable module (assumed same as above if empty)
-module_cmds=$lt_module_cmds_F77
-module_expsym_cmds=$lt_module_expsym_cmds_F77
 
-# Commands to strip libraries.
-old_striplib=$lt_old_striplib
-striplib=$lt_striplib
 
-# Dependencies to place before the objects being linked to create a
-# shared library.
-predep_objects=$lt_predep_objects_F77
-
-# Dependencies to place after the objects being linked to create a
-# shared library.
-postdep_objects=$lt_postdep_objects_F77
-
-# Dependencies to place before the objects being linked to create a
-# shared library.
-predeps=$lt_predeps_F77
-
-# Dependencies to place after the objects being linked to create a
-# shared library.
-postdeps=$lt_postdeps_F77
-
-# The directories searched by this compiler when creating a shared
-# library
-compiler_lib_search_dirs=$lt_compiler_lib_search_dirs_F77
 
-# The library search path used internally by the compiler when linking
-# a shared library.
-compiler_lib_search_path=$lt_compiler_lib_search_path_F77
 
-# Method to check whether dependent libraries are shared objects.
-deplibs_check_method=$lt_deplibs_check_method
+# If no C compiler was specified, use CC.
+LTCC=${LTCC-"$CC"}
 
-# Command to use when deplibs_check_method == file_magic.
-file_magic_cmd=$lt_file_magic_cmd
+# If no C compiler flags were specified, use CFLAGS.
+LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
 
-# Flag that allows shared libraries with undefined symbols to be built.
-allow_undefined_flag=$lt_allow_undefined_flag_F77
+# Allow CC to be a program name with arguments.
+compiler=$CC
 
-# Flag that forces no undefined symbols.
-no_undefined_flag=$lt_no_undefined_flag_F77
 
-# Commands used to finish a libtool library installation in a directory.
-finish_cmds=$lt_finish_cmds
+  # save warnings/boilerplate of simple test code
+  ac_outfile=conftest.$ac_objext
+echo "$lt_simple_compile_test_code" >conftest.$ac_ext
+eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_compiler_boilerplate=`cat conftest.err`
+$RM conftest*
 
-# Same as above, but a single script fragment to be evaled but not shown.
-finish_eval=$lt_finish_eval
+  ac_outfile=conftest.$ac_objext
+echo "$lt_simple_link_test_code" >conftest.$ac_ext
+eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_linker_boilerplate=`cat conftest.err`
+$RM -r conftest*
 
-# Take the output of nm and produce a listing of raw symbols and C names.
-global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe
 
-# Transform the output of nm in a proper C declaration
-global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl
+  # Allow CC to be a program name with arguments.
+  lt_save_CC=$CC
+  lt_save_LD=$LD
+  lt_save_GCC=$GCC
+  GCC=$GXX
+  lt_save_with_gnu_ld=$with_gnu_ld
+  lt_save_path_LD=$lt_cv_path_LD
+  if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then
+    lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx
+  else
+    $as_unset lt_cv_prog_gnu_ld
+  fi
+  if test -n "${lt_cv_path_LDCXX+set}"; then
+    lt_cv_path_LD=$lt_cv_path_LDCXX
+  else
+    $as_unset lt_cv_path_LD
+  fi
+  test -z "${LDCXX+set}" || LD=$LDCXX
+  CC=${CXX-"c++"}
+  compiler=$CC
+  compiler_CXX=$CC
+  for cc_temp in $compiler""; do
+  case $cc_temp in
+    compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
+    distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
+    \-*) ;;
+    *) break;;
+  esac
+done
+cc_basename=`$ECHO "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
 
-# Transform the output of nm in a C name address pair
-global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
 
-# This is the shared library runtime path variable.
-runpath_var=$runpath_var
+  if test -n "$compiler"; then
+    # We don't want -fno-exception when compiling C++ code, so set the
+    # no_builtin_flag separately
+    if test "$GXX" = yes; then
+      lt_prog_compiler_no_builtin_flag_CXX=' -fno-builtin'
+    else
+      lt_prog_compiler_no_builtin_flag_CXX=
+    fi
 
-# This is the shared library path variable.
-shlibpath_var=$shlibpath_var
+    if test "$GXX" = yes; then
+      # Set up default GNU C++ configuration
 
-# Is shlibpath searched before the hard-coded library search path?
-shlibpath_overrides_runpath=$shlibpath_overrides_runpath
 
-# How to hardcode a shared library path into an executable.
-hardcode_action=$hardcode_action_F77
 
-# Whether we should hardcode library paths into libraries.
-hardcode_into_libs=$hardcode_into_libs
+# Check whether --with-gnu-ld was given.
+if test "${with_gnu_ld+set}" = set; then :
+  withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes
+else
+  with_gnu_ld=no
+fi
 
-# Flag to hardcode \$libdir into a binary during linking.
-# This must work even if \$libdir does not exist.
-hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_F77
-
-# If ld is used when linking, flag to hardcode \$libdir into
-# a binary during linking. This must work even if \$libdir does
-# not exist.
-hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_F77
-
-# Whether we need a single -rpath flag with a separated argument.
-hardcode_libdir_separator=$lt_hardcode_libdir_separator_F77
-
-# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the
-# resulting binary.
-hardcode_direct=$hardcode_direct_F77
-
-# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
-# resulting binary.
-hardcode_minus_L=$hardcode_minus_L_F77
-
-# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into
-# the resulting binary.
-hardcode_shlibpath_var=$hardcode_shlibpath_var_F77
-
-# Set to yes if building a shared library automatically hardcodes DIR into the library
-# and all subsequent libraries and executables linked against it.
-hardcode_automatic=$hardcode_automatic_F77
-
-# Variables whose values should be saved in libtool wrapper scripts and
-# restored at relink time.
-variables_saved_for_relink="$variables_saved_for_relink"
+ac_prog=ld
+if test "$GCC" = yes; then
+  # Check if gcc -print-prog-name=ld gives a path.
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ld used by $CC" >&5
+$as_echo_n "checking for ld used by $CC... " >&6; }
+  case $host in
+  *-*-mingw*)
+    # gcc leaves a trailing carriage return which upsets mingw
+    ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
+  *)
+    ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
+  esac
+  case $ac_prog in
+    # Accept absolute paths.
+    [\\/]* | ?:[\\/]*)
+      re_direlt='/[^/][^/]*/\.\./'
+      # Canonicalize the pathname of ld
+      ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'`
+      while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do
+	ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"`
+      done
+      test -z "$LD" && LD="$ac_prog"
+      ;;
+  "")
+    # If it fails, then pretend we aren't using GCC.
+    ac_prog=ld
+    ;;
+  *)
+    # If it is relative, then search for the first ld in PATH.
+    with_gnu_ld=unknown
+    ;;
+  esac
+elif test "$with_gnu_ld" = yes; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU ld" >&5
+$as_echo_n "checking for GNU ld... " >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for non-GNU ld" >&5
+$as_echo_n "checking for non-GNU ld... " >&6; }
+fi
+if test "${lt_cv_path_LD+set}" = set; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -z "$LD"; then
+  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+  for ac_dir in $PATH; do
+    IFS="$lt_save_ifs"
+    test -z "$ac_dir" && ac_dir=.
+    if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
+      lt_cv_path_LD="$ac_dir/$ac_prog"
+      # Check to see if the program is GNU ld.  I'd rather use --version,
+      # but apparently some variants of GNU ld only accept -v.
+      # Break only if it was the GNU/non-GNU ld that we prefer.
+      case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
+      *GNU* | *'with BFD'*)
+	test "$with_gnu_ld" != no && break
+	;;
+      *)
+	test "$with_gnu_ld" != yes && break
+	;;
+      esac
+    fi
+  done
+  IFS="$lt_save_ifs"
+else
+  lt_cv_path_LD="$LD" # Let the user override the test with a path.
+fi
+fi
 
-# Whether libtool must link a program against all its dependency libraries.
-link_all_deplibs=$link_all_deplibs_F77
+LD="$lt_cv_path_LD"
+if test -n "$LD"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LD" >&5
+$as_echo "$LD" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+test -z "$LD" && as_fn_error "no acceptable ld found in \$PATH" "$LINENO" 5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if the linker ($LD) is GNU ld" >&5
+$as_echo_n "checking if the linker ($LD) is GNU ld... " >&6; }
+if test "${lt_cv_prog_gnu_ld+set}" = set; then :
+  $as_echo_n "(cached) " >&6
+else
+  # I'd rather use --version here, but apparently some GNU lds only accept -v.
+case `$LD -v 2>&1 </dev/null` in
+*GNU* | *'with BFD'*)
+  lt_cv_prog_gnu_ld=yes
+  ;;
+*)
+  lt_cv_prog_gnu_ld=no
+  ;;
+esac
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_gnu_ld" >&5
+$as_echo "$lt_cv_prog_gnu_ld" >&6; }
+with_gnu_ld=$lt_cv_prog_gnu_ld
 
-# Compile-time system search path for libraries
-sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
 
-# Run-time system search path for libraries
-sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
 
-# Fix the shell variable \$srcfile for the compiler.
-fix_srcfile_path=$lt_fix_srcfile_path
 
-# Set to yes if exported symbols are required.
-always_export_symbols=$always_export_symbols_F77
 
-# The commands to list exported symbols.
-export_symbols_cmds=$lt_export_symbols_cmds_F77
 
-# The commands to extract the exported symbol list from a shared archive.
-extract_expsyms_cmds=$lt_extract_expsyms_cmds
 
-# Symbols that should not be listed in the preloaded symbols.
-exclude_expsyms=$lt_exclude_expsyms_F77
+      # Check if GNU C++ uses GNU ld as the underlying linker, since the
+      # archiving commands below assume that GNU ld is being used.
+      if test "$with_gnu_ld" = yes; then
+        archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
+        archive_expsym_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+
+        hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir'
+        export_dynamic_flag_spec_CXX='${wl}--export-dynamic'
+
+        # If archive_cmds runs LD, not CC, wlarc should be empty
+        # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to
+        #     investigate it a little bit more. (MM)
+        wlarc='${wl}'
+
+        # ancient GNU ld didn't support --whole-archive et. al.
+        if eval "`$CC -print-prog-name=ld` --help 2>&1" |
+	  $GREP 'no-whole-archive' > /dev/null; then
+          whole_archive_flag_spec_CXX="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+        else
+          whole_archive_flag_spec_CXX=
+        fi
+      else
+        with_gnu_ld=no
+        wlarc=
 
-# Symbols that must always be exported.
-include_expsyms=$lt_include_expsyms_F77
+        # A generic and very simple default shared library creation
+        # command for GNU C++ for the case where it uses the native
+        # linker, instead of GNU ld.  If possible, this setting should
+        # overridden to take advantage of the native linker features on
+        # the platform it is being used on.
+        archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
+      fi
 
-# ### END LIBTOOL TAG CONFIG: $tagname
+      # Commands to make compiler produce verbose output that lists
+      # what "hidden" libraries, object files and flags are used when
+      # linking a shared library.
+      output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"'
 
-__EOF__
+    else
+      GXX=no
+      with_gnu_ld=no
+      wlarc=
+    fi
 
+    # PORTME: fill in a description of your system's C++ link characteristics
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $compiler linker ($LD) supports shared libraries" >&5
+$as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; }
+    ld_shlibs_CXX=yes
+    case $host_os in
+      aix3*)
+        # FIXME: insert proper C++ library support
+        ld_shlibs_CXX=no
+        ;;
+      aix[4-9]*)
+        if test "$host_cpu" = ia64; then
+          # On IA64, the linker does run time linking by default, so we don't
+          # have to do anything special.
+          aix_use_runtimelinking=no
+          exp_sym_flag='-Bexport'
+          no_entry_flag=""
+        else
+          aix_use_runtimelinking=no
 
-else
-  # If there is no Makefile yet, we rely on a make rule to execute
-  # `config.status --recheck' to rerun these tests and create the
-  # libtool script then.
-  ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'`
-  if test -f "$ltmain_in"; then
-    test -f Makefile && make "$ltmain"
-  fi
-fi
+          # Test if we are trying to use run time linking or normal
+          # AIX style linking. If -brtl is somewhere in LDFLAGS, we
+          # need to do runtime linking.
+          case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*)
+	    for ld_flag in $LDFLAGS; do
+	      case $ld_flag in
+	      *-brtl*)
+	        aix_use_runtimelinking=yes
+	        break
+	        ;;
+	      esac
+	    done
+	    ;;
+          esac
 
+          exp_sym_flag='-bexport'
+          no_entry_flag='-bnoentry'
+        fi
 
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
+        # When large executables or shared objects are built, AIX ld can
+        # have problems creating the table of contents.  If linking a library
+        # or program results in "error TOC overflow" add -mminimal-toc to
+        # CXXFLAGS/CFLAGS for g++/gcc.  In the cases where that is not
+        # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
+
+        archive_cmds_CXX=''
+        hardcode_direct_CXX=yes
+        hardcode_direct_absolute_CXX=yes
+        hardcode_libdir_separator_CXX=':'
+        link_all_deplibs_CXX=yes
+        file_list_spec_CXX='${wl}-f,'
+
+        if test "$GXX" = yes; then
+          case $host_os in aix4.[012]|aix4.[012].*)
+          # We only want to do this on AIX 4.2 and lower, the check
+          # below for broken collect2 doesn't work under 4.3+
+	  collect2name=`${CC} -print-prog-name=collect2`
+	  if test -f "$collect2name" &&
+	     strings "$collect2name" | $GREP resolve_lib_name >/dev/null
+	  then
+	    # We have reworked collect2
+	    :
+	  else
+	    # We have old collect2
+	    hardcode_direct_CXX=unsupported
+	    # It fails to find uninstalled libraries when the uninstalled
+	    # path is not listed in the libpath.  Setting hardcode_minus_L
+	    # to unsupported forces relinking
+	    hardcode_minus_L_CXX=yes
+	    hardcode_libdir_flag_spec_CXX='-L$libdir'
+	    hardcode_libdir_separator_CXX=
+	  fi
+          esac
+          shared_flag='-shared'
+	  if test "$aix_use_runtimelinking" = yes; then
+	    shared_flag="$shared_flag "'${wl}-G'
+	  fi
+        else
+          # not using gcc
+          if test "$host_cpu" = ia64; then
+	  # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
+	  # chokes on -Wl,-G. The following line is correct:
+	  shared_flag='-G'
+          else
+	    if test "$aix_use_runtimelinking" = yes; then
+	      shared_flag='${wl}-G'
+	    else
+	      shared_flag='${wl}-bM:SRE'
+	    fi
+          fi
+        fi
 
-CC="$lt_save_CC"
+        export_dynamic_flag_spec_CXX='${wl}-bexpall'
+        # It seems that -bexpall does not export symbols beginning with
+        # underscore (_), so it is better to generate a list of symbols to
+	# export.
+        always_export_symbols_CXX=yes
+        if test "$aix_use_runtimelinking" = yes; then
+          # Warning - without using the other runtime loading flags (-brtl),
+          # -berok will link without error, but may produce a broken library.
+          allow_undefined_flag_CXX='-berok'
+          # Determine the default libpath from the value encoded in an empty
+          # executable.
+          cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
 
-	else
-	  tagname=""
-	fi
-	;;
+int
+main ()
+{
 
-      GCJ)
-	if test -n "$GCJ" && test "X$GCJ" != "Xno"; then
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_cxx_try_link "$LINENO"; then :
 
+lt_aix_libpath_sed='
+    /Import File Strings/,/^$/ {
+	/^0/ {
+	    s/^0  *\(.*\)$/\1/
+	    p
+	}
+    }'
+aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+# Check for a 64-bit object if we didn't find anything.
+if test -z "$aix_libpath"; then
+  aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+fi
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
 
-# Source file extension for Java test sources.
-ac_ext=java
+          hardcode_libdir_flag_spec_CXX='${wl}-blibpath:$libdir:'"$aix_libpath"
 
-# Object file extension for compiled Java test sources.
-objext=o
-objext_GCJ=$objext
+          archive_expsym_cmds_CXX='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then $ECHO "X${wl}${allow_undefined_flag}" | $Xsed; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+        else
+          if test "$host_cpu" = ia64; then
+	    hardcode_libdir_flag_spec_CXX='${wl}-R $libdir:/usr/lib:/lib'
+	    allow_undefined_flag_CXX="-z nodefs"
+	    archive_expsym_cmds_CXX="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
+          else
+	    # Determine the default libpath from the value encoded in an
+	    # empty executable.
+	    cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
 
-# Code to be used in simple compile tests
-lt_simple_compile_test_code="class foo {}"
+int
+main ()
+{
 
-# Code to be used in simple link tests
-lt_simple_link_test_code='public class conftest { public static void main(String[] argv) {}; }'
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_cxx_try_link "$LINENO"; then :
 
-# ltmain only uses $CC for tagged configurations so make sure $CC is set.
+lt_aix_libpath_sed='
+    /Import File Strings/,/^$/ {
+	/^0/ {
+	    s/^0  *\(.*\)$/\1/
+	    p
+	}
+    }'
+aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+# Check for a 64-bit object if we didn't find anything.
+if test -z "$aix_libpath"; then
+  aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+fi
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
 
-# If no C compiler was specified, use CC.
-LTCC=${LTCC-"$CC"}
+	    hardcode_libdir_flag_spec_CXX='${wl}-blibpath:$libdir:'"$aix_libpath"
+	    # Warning - without using the other run time loading flags,
+	    # -berok will link without error, but may produce a broken library.
+	    no_undefined_flag_CXX=' ${wl}-bernotok'
+	    allow_undefined_flag_CXX=' ${wl}-berok'
+	    # Exported symbols can be pulled into shared objects from archives
+	    whole_archive_flag_spec_CXX='$convenience'
+	    archive_cmds_need_lc_CXX=yes
+	    # This is similar to how AIX traditionally builds its shared
+	    # libraries.
+	    archive_expsym_cmds_CXX="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
+          fi
+        fi
+        ;;
 
-# If no C compiler flags were specified, use CFLAGS.
-LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
+      beos*)
+	if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+	  allow_undefined_flag_CXX=unsupported
+	  # Joseph Beckenbach <jrb3@best.com> says some releases of gcc
+	  # support --undefined.  This deserves some investigation.  FIXME
+	  archive_cmds_CXX='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	else
+	  ld_shlibs_CXX=no
+	fi
+	;;
 
-# Allow CC to be a program name with arguments.
-compiler=$CC
+      chorus*)
+        case $cc_basename in
+          *)
+	  # FIXME: insert proper C++ library support
+	  ld_shlibs_CXX=no
+	  ;;
+        esac
+        ;;
 
+      cygwin* | mingw* | pw32* | cegcc*)
+        # _LT_TAGVAR(hardcode_libdir_flag_spec, CXX) is actually meaningless,
+        # as there is no search path for DLLs.
+        hardcode_libdir_flag_spec_CXX='-L$libdir'
+        allow_undefined_flag_CXX=unsupported
+        always_export_symbols_CXX=no
+        enable_shared_with_static_runtimes_CXX=yes
+
+        if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
+          archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+          # If the export-symbols file already is a .def file (1st line
+          # is EXPORTS), use it as is; otherwise, prepend...
+          archive_expsym_cmds_CXX='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
+	    cp $export_symbols $output_objdir/$soname.def;
+          else
+	    echo EXPORTS > $output_objdir/$soname.def;
+	    cat $export_symbols >> $output_objdir/$soname.def;
+          fi~
+          $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+        else
+          ld_shlibs_CXX=no
+        fi
+        ;;
+      darwin* | rhapsody*)
 
-# save warnings/boilerplate of simple test code
-ac_outfile=conftest.$ac_objext
-echo "$lt_simple_compile_test_code" >conftest.$ac_ext
-eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
-_lt_compiler_boilerplate=`cat conftest.err`
-$rm conftest*
 
-ac_outfile=conftest.$ac_objext
-echo "$lt_simple_link_test_code" >conftest.$ac_ext
-eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
-_lt_linker_boilerplate=`cat conftest.err`
-$rm -r conftest*
+  archive_cmds_need_lc_CXX=no
+  hardcode_direct_CXX=no
+  hardcode_automatic_CXX=yes
+  hardcode_shlibpath_var_CXX=unsupported
+  whole_archive_flag_spec_CXX=''
+  link_all_deplibs_CXX=yes
+  allow_undefined_flag_CXX="$_lt_dar_allow_undefined"
+  case $cc_basename in
+     ifort*) _lt_dar_can_shared=yes ;;
+     *) _lt_dar_can_shared=$GCC ;;
+  esac
+  if test "$_lt_dar_can_shared" = "yes"; then
+    output_verbose_link_cmd=echo
+    archive_cmds_CXX="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}"
+    module_cmds_CXX="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}"
+    archive_expsym_cmds_CXX="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}"
+    module_expsym_cmds_CXX="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}"
+       if test "$lt_cv_apple_cc_single_mod" != "yes"; then
+      archive_cmds_CXX="\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dsymutil}"
+      archive_expsym_cmds_CXX="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dar_export_syms}${_lt_dsymutil}"
+    fi
 
+  else
+  ld_shlibs_CXX=no
+  fi
 
-# Allow CC to be a program name with arguments.
-lt_save_CC="$CC"
-CC=${GCJ-"gcj"}
-compiler=$CC
-compiler_GCJ=$CC
-for cc_temp in $compiler""; do
-  case $cc_temp in
-    compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
-    distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
-    \-*) ;;
-    *) break;;
-  esac
-done
-cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
+	;;
 
-LD_GCJ="$LD"
+      dgux*)
+        case $cc_basename in
+          ec++*)
+	    # FIXME: insert proper C++ library support
+	    ld_shlibs_CXX=no
+	    ;;
+          ghcx*)
+	    # Green Hills C++ Compiler
+	    # FIXME: insert proper C++ library support
+	    ld_shlibs_CXX=no
+	    ;;
+          *)
+	    # FIXME: insert proper C++ library support
+	    ld_shlibs_CXX=no
+	    ;;
+        esac
+        ;;
 
-# GCJ did not exist at the time GCC didn't implicitly link libc in.
-archive_cmds_need_lc_GCJ=no
+      freebsd[12]*)
+        # C++ shared libraries reported to be fairly broken before
+	# switch to ELF
+        ld_shlibs_CXX=no
+        ;;
 
-old_archive_cmds_GCJ=$old_archive_cmds
+      freebsd-elf*)
+        archive_cmds_need_lc_CXX=no
+        ;;
 
+      freebsd* | dragonfly*)
+        # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF
+        # conventions
+        ld_shlibs_CXX=yes
+        ;;
 
-lt_prog_compiler_no_builtin_flag_GCJ=
+      gnu*)
+        ;;
 
-if test "$GCC" = yes; then
-  lt_prog_compiler_no_builtin_flag_GCJ=' -fno-builtin'
+      hpux9*)
+        hardcode_libdir_flag_spec_CXX='${wl}+b ${wl}$libdir'
+        hardcode_libdir_separator_CXX=:
+        export_dynamic_flag_spec_CXX='${wl}-E'
+        hardcode_direct_CXX=yes
+        hardcode_minus_L_CXX=yes # Not in the search PATH,
+				             # but as the default
+				             # location of the library.
+
+        case $cc_basename in
+          CC*)
+            # FIXME: insert proper C++ library support
+            ld_shlibs_CXX=no
+            ;;
+          aCC*)
+            archive_cmds_CXX='$RM $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+            # Commands to make compiler produce verbose output that lists
+            # what "hidden" libraries, object files and flags are used when
+            # linking a shared library.
+            #
+            # There doesn't appear to be a way to prevent this compiler from
+            # explicitly linking system object files so we need to strip them
+            # from the output so that they don't get included in the library
+            # dependencies.
+            output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $EGREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed'
+            ;;
+          *)
+            if test "$GXX" = yes; then
+              archive_cmds_CXX='$RM $output_objdir/$soname~$CC -shared -nostdlib -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+            else
+              # FIXME: insert proper C++ library support
+              ld_shlibs_CXX=no
+            fi
+            ;;
+        esac
+        ;;
 
+      hpux10*|hpux11*)
+        if test $with_gnu_ld = no; then
+	  hardcode_libdir_flag_spec_CXX='${wl}+b ${wl}$libdir'
+	  hardcode_libdir_separator_CXX=:
 
-{ $as_echo "$as_me:$LINENO: checking if $compiler supports -fno-rtti -fno-exceptions" >&5
-$as_echo_n "checking if $compiler supports -fno-rtti -fno-exceptions... " >&6; }
-if test "${lt_cv_prog_compiler_rtti_exceptions+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
-  lt_cv_prog_compiler_rtti_exceptions=no
-  ac_outfile=conftest.$ac_objext
-   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
-   lt_compiler_flag="-fno-rtti -fno-exceptions"
-   # Insert the option either (1) after the last *FLAGS variable, or
-   # (2) before a word containing "conftest.", or (3) at the end.
-   # Note that $ac_compile itself does not contain backslashes and begins
-   # with a dollar sign (not a hyphen), so the echo should work correctly.
-   # The option is referenced via a variable to avoid confusing sed.
-   lt_compile=`echo "$ac_compile" | $SED \
-   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-   -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:17619: $lt_compile\"" >&5)
-   (eval "$lt_compile" 2>conftest.err)
-   ac_status=$?
-   cat conftest.err >&5
-   echo "$as_me:17623: \$? = $ac_status" >&5
-   if (exit $ac_status) && test -s "$ac_outfile"; then
-     # The compiler can only warn and ignore the option if not recognized
-     # So say no if there are warnings other than the usual output.
-     $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
-     $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
-     if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
-       lt_cv_prog_compiler_rtti_exceptions=yes
-     fi
-   fi
-   $rm conftest*
+          case $host_cpu in
+            hppa*64*|ia64*)
+              ;;
+            *)
+	      export_dynamic_flag_spec_CXX='${wl}-E'
+              ;;
+          esac
+        fi
+        case $host_cpu in
+          hppa*64*|ia64*)
+            hardcode_direct_CXX=no
+            hardcode_shlibpath_var_CXX=no
+            ;;
+          *)
+            hardcode_direct_CXX=yes
+            hardcode_direct_absolute_CXX=yes
+            hardcode_minus_L_CXX=yes # Not in the search PATH,
+					         # but as the default
+					         # location of the library.
+            ;;
+        esac
+
+        case $cc_basename in
+          CC*)
+	    # FIXME: insert proper C++ library support
+	    ld_shlibs_CXX=no
+	    ;;
+          aCC*)
+	    case $host_cpu in
+	      hppa*64*)
+	        archive_cmds_CXX='$CC -b ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	        ;;
+	      ia64*)
+	        archive_cmds_CXX='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	        ;;
+	      *)
+	        archive_cmds_CXX='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	        ;;
+	    esac
+	    # Commands to make compiler produce verbose output that lists
+	    # what "hidden" libraries, object files and flags are used when
+	    # linking a shared library.
+	    #
+	    # There doesn't appear to be a way to prevent this compiler from
+	    # explicitly linking system object files so we need to strip them
+	    # from the output so that they don't get included in the library
+	    # dependencies.
+	    output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $GREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed'
+	    ;;
+          *)
+	    if test "$GXX" = yes; then
+	      if test $with_gnu_ld = no; then
+	        case $host_cpu in
+	          hppa*64*)
+	            archive_cmds_CXX='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	            ;;
+	          ia64*)
+	            archive_cmds_CXX='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	            ;;
+	          *)
+	            archive_cmds_CXX='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	            ;;
+	        esac
+	      fi
+	    else
+	      # FIXME: insert proper C++ library support
+	      ld_shlibs_CXX=no
+	    fi
+	    ;;
+        esac
+        ;;
 
-fi
-{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_rtti_exceptions" >&5
-$as_echo "$lt_cv_prog_compiler_rtti_exceptions" >&6; }
+      interix[3-9]*)
+	hardcode_direct_CXX=no
+	hardcode_shlibpath_var_CXX=no
+	hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir'
+	export_dynamic_flag_spec_CXX='${wl}-E'
+	# Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
+	# Instead, shared libraries are loaded at an image base (0x10000000 by
+	# default) and relocated if they conflict, which is a slow very memory
+	# consuming and fragmenting process.  To avoid this, we pick a random,
+	# 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
+	# time.  Moving up from 0x10000000 also allows more sbrk(2) space.
+	archive_cmds_CXX='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+	archive_expsym_cmds_CXX='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+	;;
+      irix5* | irix6*)
+        case $cc_basename in
+          CC*)
+	    # SGI C++
+	    archive_cmds_CXX='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
+
+	    # Archives containing C++ object files must be created using
+	    # "CC -ar", where "CC" is the IRIX C++ compiler.  This is
+	    # necessary to make sure instantiated templates are included
+	    # in the archive.
+	    old_archive_cmds_CXX='$CC -ar -WR,-u -o $oldlib $oldobjs'
+	    ;;
+          *)
+	    if test "$GXX" = yes; then
+	      if test "$with_gnu_ld" = no; then
+	        archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+	      else
+	        archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` -o $lib'
+	      fi
+	    fi
+	    link_all_deplibs_CXX=yes
+	    ;;
+        esac
+        hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir'
+        hardcode_libdir_separator_CXX=:
+        inherit_rpath_CXX=yes
+        ;;
 
-if test x"$lt_cv_prog_compiler_rtti_exceptions" = xyes; then
-    lt_prog_compiler_no_builtin_flag_GCJ="$lt_prog_compiler_no_builtin_flag_GCJ -fno-rtti -fno-exceptions"
-else
-    :
-fi
+      linux* | k*bsd*-gnu)
+        case $cc_basename in
+          KCC*)
+	    # Kuck and Associates, Inc. (KAI) C++ Compiler
+
+	    # KCC will only create a shared library if the output file
+	    # ends with ".so" (or ".sl" for HP-UX), so rename the library
+	    # to its proper name (with version) after linking.
+	    archive_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
+	    archive_expsym_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib'
+	    # Commands to make compiler produce verbose output that lists
+	    # what "hidden" libraries, object files and flags are used when
+	    # linking a shared library.
+	    #
+	    # There doesn't appear to be a way to prevent this compiler from
+	    # explicitly linking system object files so we need to strip them
+	    # from the output so that they don't get included in the library
+	    # dependencies.
+	    output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | $GREP "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed'
+
+	    hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir'
+	    export_dynamic_flag_spec_CXX='${wl}--export-dynamic'
+
+	    # Archives containing C++ object files must be created using
+	    # "CC -Bstatic", where "CC" is the KAI C++ compiler.
+	    old_archive_cmds_CXX='$CC -Bstatic -o $oldlib $oldobjs'
+	    ;;
+	  icpc* | ecpc* )
+	    # Intel C++
+	    with_gnu_ld=yes
+	    # version 8.0 and above of icpc choke on multiply defined symbols
+	    # if we add $predep_objects and $postdep_objects, however 7.1 and
+	    # earlier do not add the objects themselves.
+	    case `$CC -V 2>&1` in
+	      *"Version 7."*)
+	        archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
+		archive_expsym_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+		;;
+	      *)  # Version 8.0 or newer
+	        tmp_idyn=
+	        case $host_cpu in
+		  ia64*) tmp_idyn=' -i_dynamic';;
+		esac
+	        archive_cmds_CXX='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+		archive_expsym_cmds_CXX='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+		;;
+	    esac
+	    archive_cmds_need_lc_CXX=no
+	    hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir'
+	    export_dynamic_flag_spec_CXX='${wl}--export-dynamic'
+	    whole_archive_flag_spec_CXX='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
+	    ;;
+          pgCC* | pgcpp*)
+            # Portland Group C++ compiler
+	    case `$CC -V` in
+	    *pgCC\ [1-5]* | *pgcpp\ [1-5]*)
+	      prelink_cmds_CXX='tpldir=Template.dir~
+		rm -rf $tpldir~
+		$CC --prelink_objects --instantiation_dir $tpldir $objs $libobjs $compile_deplibs~
+		compile_command="$compile_command `find $tpldir -name \*.o | $NL2SP`"'
+	      old_archive_cmds_CXX='tpldir=Template.dir~
+		rm -rf $tpldir~
+		$CC --prelink_objects --instantiation_dir $tpldir $oldobjs$old_deplibs~
+		$AR $AR_FLAGS $oldlib$oldobjs$old_deplibs `find $tpldir -name \*.o | $NL2SP`~
+		$RANLIB $oldlib'
+	      archive_cmds_CXX='tpldir=Template.dir~
+		rm -rf $tpldir~
+		$CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~
+		$CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
+	      archive_expsym_cmds_CXX='tpldir=Template.dir~
+		rm -rf $tpldir~
+		$CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~
+		$CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
+	      ;;
+	    *) # Version 6 will use weak symbols
+	      archive_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
+	      archive_expsym_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
+	      ;;
+	    esac
 
-fi
+	    hardcode_libdir_flag_spec_CXX='${wl}--rpath ${wl}$libdir'
+	    export_dynamic_flag_spec_CXX='${wl}--export-dynamic'
+	    whole_archive_flag_spec_CXX='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
+            ;;
+	  cxx*)
+	    # Compaq C++
+	    archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	    archive_expsym_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname  -o $lib ${wl}-retain-symbols-file $wl$export_symbols'
 
-lt_prog_compiler_wl_GCJ=
-lt_prog_compiler_pic_GCJ=
-lt_prog_compiler_static_GCJ=
+	    runpath_var=LD_RUN_PATH
+	    hardcode_libdir_flag_spec_CXX='-rpath $libdir'
+	    hardcode_libdir_separator_CXX=:
 
-{ $as_echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5
-$as_echo_n "checking for $compiler option to produce PIC... " >&6; }
+	    # Commands to make compiler produce verbose output that lists
+	    # what "hidden" libraries, object files and flags are used when
+	    # linking a shared library.
+	    #
+	    # There doesn't appear to be a way to prevent this compiler from
+	    # explicitly linking system object files so we need to strip them
+	    # from the output so that they don't get included in the library
+	    # dependencies.
+	    output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld"`; templist=`$ECHO "X$templist" | $Xsed -e "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed'
+	    ;;
+	  xl*)
+	    # IBM XL 8.0 on PPC, with GNU ld
+	    hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir'
+	    export_dynamic_flag_spec_CXX='${wl}--export-dynamic'
+	    archive_cmds_CXX='$CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	    if test "x$supports_anon_versioning" = xyes; then
+	      archive_expsym_cmds_CXX='echo "{ global:" > $output_objdir/$libname.ver~
+		cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+		echo "local: *; };" >> $output_objdir/$libname.ver~
+		$CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
+	    fi
+	    ;;
+	  *)
+	    case `$CC -V 2>&1 | sed 5q` in
+	    *Sun\ C*)
+	      # Sun C++ 5.9
+	      no_undefined_flag_CXX=' -zdefs'
+	      archive_cmds_CXX='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	      archive_expsym_cmds_CXX='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file ${wl}$export_symbols'
+	      hardcode_libdir_flag_spec_CXX='-R$libdir'
+	      whole_archive_flag_spec_CXX='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
+	      compiler_needs_object_CXX=yes
+
+	      # Not sure whether something based on
+	      # $CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1
+	      # would be better.
+	      output_verbose_link_cmd='echo'
+
+	      # Archives containing C++ object files must be created using
+	      # "CC -xar", where "CC" is the Sun C++ compiler.  This is
+	      # necessary to make sure instantiated templates are included
+	      # in the archive.
+	      old_archive_cmds_CXX='$CC -xar -o $oldlib $oldobjs'
+	      ;;
+	    esac
+	    ;;
+	esac
+	;;
 
-  if test "$GCC" = yes; then
-    lt_prog_compiler_wl_GCJ='-Wl,'
-    lt_prog_compiler_static_GCJ='-static'
+      lynxos*)
+        # FIXME: insert proper C++ library support
+	ld_shlibs_CXX=no
+	;;
 
-    case $host_os in
-      aix*)
-      # All AIX code is PIC.
-      if test "$host_cpu" = ia64; then
-	# AIX 5 now supports IA64 processor
-	lt_prog_compiler_static_GCJ='-Bstatic'
-      fi
-      ;;
+      m88k*)
+        # FIXME: insert proper C++ library support
+        ld_shlibs_CXX=no
+	;;
 
-    amigaos*)
-      # FIXME: we need at least 68020 code to build shared libraries, but
-      # adding the `-m68020' flag to GCC prevents building anything better,
-      # like `-m68040'.
-      lt_prog_compiler_pic_GCJ='-m68020 -resident32 -malways-restore-a4'
-      ;;
+      mvs*)
+        case $cc_basename in
+          cxx*)
+	    # FIXME: insert proper C++ library support
+	    ld_shlibs_CXX=no
+	    ;;
+	  *)
+	    # FIXME: insert proper C++ library support
+	    ld_shlibs_CXX=no
+	    ;;
+	esac
+	;;
 
-    beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
-      # PIC is the default for these OSes.
-      ;;
+      netbsd*)
+        if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+	  archive_cmds_CXX='$LD -Bshareable  -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags'
+	  wlarc=
+	  hardcode_libdir_flag_spec_CXX='-R$libdir'
+	  hardcode_direct_CXX=yes
+	  hardcode_shlibpath_var_CXX=no
+	fi
+	# Workaround some broken pre-1.5 toolchains
+	output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"'
+	;;
 
-    mingw* | cygwin* | pw32* | os2*)
-      # This hack is so that the source file can tell whether it is being
-      # built for inclusion in a dll (and should export symbols for example).
-      # Although the cygwin gcc ignores -fPIC, still need this for old-style
-      # (--disable-auto-import) libraries
+      *nto* | *qnx*)
+        ld_shlibs_CXX=yes
+	;;
 
-      ;;
+      openbsd2*)
+        # C++ shared libraries are fairly broken
+	ld_shlibs_CXX=no
+	;;
 
-    darwin* | rhapsody*)
-      # PIC is the default on this platform
-      # Common symbols not allowed in MH_DYLIB files
-      lt_prog_compiler_pic_GCJ='-fno-common'
-      ;;
+      openbsd*)
+	if test -f /usr/libexec/ld.so; then
+	  hardcode_direct_CXX=yes
+	  hardcode_shlibpath_var_CXX=no
+	  hardcode_direct_absolute_CXX=yes
+	  archive_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
+	  hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir'
+	  if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+	    archive_expsym_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib'
+	    export_dynamic_flag_spec_CXX='${wl}-E'
+	    whole_archive_flag_spec_CXX="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+	  fi
+	  output_verbose_link_cmd=echo
+	else
+	  ld_shlibs_CXX=no
+	fi
+	;;
 
-    interix[3-9]*)
-      # Interix 3.x gcc -fpic/-fPIC options generate broken code.
-      # Instead, we relocate shared libraries at runtime.
-      ;;
+      osf3* | osf4* | osf5*)
+        case $cc_basename in
+          KCC*)
+	    # Kuck and Associates, Inc. (KAI) C++ Compiler
+
+	    # KCC will only create a shared library if the output file
+	    # ends with ".so" (or ".sl" for HP-UX), so rename the library
+	    # to its proper name (with version) after linking.
+	    archive_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo "$lib" | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
+
+	    hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir'
+	    hardcode_libdir_separator_CXX=:
+
+	    # Archives containing C++ object files must be created using
+	    # the KAI C++ compiler.
+	    case $host in
+	      osf3*) old_archive_cmds_CXX='$CC -Bstatic -o $oldlib $oldobjs' ;;
+	      *) old_archive_cmds_CXX='$CC -o $oldlib $oldobjs' ;;
+	    esac
+	    ;;
+          RCC*)
+	    # Rational C++ 2.4.1
+	    # FIXME: insert proper C++ library support
+	    ld_shlibs_CXX=no
+	    ;;
+          cxx*)
+	    case $host in
+	      osf3*)
+	        allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*'
+	        archive_cmds_CXX='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && $ECHO "X${wl}-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
+	        hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir'
+		;;
+	      *)
+	        allow_undefined_flag_CXX=' -expect_unresolved \*'
+	        archive_cmds_CXX='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
+	        archive_expsym_cmds_CXX='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~
+	          echo "-hidden">> $lib.exp~
+	          $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname ${wl}-input ${wl}$lib.exp  `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib~
+	          $RM $lib.exp'
+	        hardcode_libdir_flag_spec_CXX='-rpath $libdir'
+		;;
+	    esac
 
-    msdosdjgpp*)
-      # Just because we use GCC doesn't mean we suddenly get shared libraries
-      # on systems that don't support them.
-      lt_prog_compiler_can_build_shared_GCJ=no
-      enable_shared=no
-      ;;
+	    hardcode_libdir_separator_CXX=:
 
-    sysv4*MP*)
-      if test -d /usr/nec; then
-	lt_prog_compiler_pic_GCJ=-Kconform_pic
-      fi
-      ;;
+	    # Commands to make compiler produce verbose output that lists
+	    # what "hidden" libraries, object files and flags are used when
+	    # linking a shared library.
+	    #
+	    # There doesn't appear to be a way to prevent this compiler from
+	    # explicitly linking system object files so we need to strip them
+	    # from the output so that they don't get included in the library
+	    # dependencies.
+	    output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld" | $GREP -v "ld:"`; templist=`$ECHO "X$templist" | $Xsed -e "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed'
+	    ;;
+	  *)
+	    if test "$GXX" = yes && test "$with_gnu_ld" = no; then
+	      allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*'
+	      case $host in
+	        osf3*)
+	          archive_cmds_CXX='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+		  ;;
+	        *)
+	          archive_cmds_CXX='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+		  ;;
+	      esac
+
+	      hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir'
+	      hardcode_libdir_separator_CXX=:
+
+	      # Commands to make compiler produce verbose output that lists
+	      # what "hidden" libraries, object files and flags are used when
+	      # linking a shared library.
+	      output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"'
+
+	    else
+	      # FIXME: insert proper C++ library support
+	      ld_shlibs_CXX=no
+	    fi
+	    ;;
+        esac
+        ;;
 
-    hpux*)
-      # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
-      # not for PA HP-UX.
-      case $host_cpu in
-      hppa*64*|ia64*)
-	# +Z the default
-	;;
-      *)
-	lt_prog_compiler_pic_GCJ='-fPIC'
-	;;
-      esac
-      ;;
+      psos*)
+        # FIXME: insert proper C++ library support
+        ld_shlibs_CXX=no
+        ;;
 
-    *)
-      lt_prog_compiler_pic_GCJ='-fPIC'
-      ;;
-    esac
-  else
-    # PORTME Check for flag to pass linker flags through the system compiler.
-    case $host_os in
-    aix*)
-      lt_prog_compiler_wl_GCJ='-Wl,'
-      if test "$host_cpu" = ia64; then
-	# AIX 5 now supports IA64 processor
-	lt_prog_compiler_static_GCJ='-Bstatic'
-      else
-	lt_prog_compiler_static_GCJ='-bnso -bI:/lib/syscalls.exp'
-      fi
-      ;;
-      darwin*)
-        # PIC is the default on this platform
-        # Common symbols not allowed in MH_DYLIB files
-       case $cc_basename in
-         xlc*)
-         lt_prog_compiler_pic_GCJ='-qnocommon'
-         lt_prog_compiler_wl_GCJ='-Wl,'
-         ;;
-       esac
-       ;;
+      sunos4*)
+        case $cc_basename in
+          CC*)
+	    # Sun C++ 4.x
+	    # FIXME: insert proper C++ library support
+	    ld_shlibs_CXX=no
+	    ;;
+          lcc*)
+	    # Lucid
+	    # FIXME: insert proper C++ library support
+	    ld_shlibs_CXX=no
+	    ;;
+          *)
+	    # FIXME: insert proper C++ library support
+	    ld_shlibs_CXX=no
+	    ;;
+        esac
+        ;;
 
-    mingw* | cygwin* | pw32* | os2*)
-      # This hack is so that the source file can tell whether it is being
-      # built for inclusion in a dll (and should export symbols for example).
+      solaris*)
+        case $cc_basename in
+          CC*)
+	    # Sun C++ 4.2, 5.x and Centerline C++
+            archive_cmds_need_lc_CXX=yes
+	    no_undefined_flag_CXX=' -zdefs'
+	    archive_cmds_CXX='$CC -G${allow_undefined_flag}  -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	    archive_expsym_cmds_CXX='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+	      $CC -G${allow_undefined_flag} ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
+
+	    hardcode_libdir_flag_spec_CXX='-R$libdir'
+	    hardcode_shlibpath_var_CXX=no
+	    case $host_os in
+	      solaris2.[0-5] | solaris2.[0-5].*) ;;
+	      *)
+		# The compiler driver will combine and reorder linker options,
+		# but understands `-z linker_flag'.
+	        # Supported since Solaris 2.6 (maybe 2.5.1?)
+		whole_archive_flag_spec_CXX='-z allextract$convenience -z defaultextract'
+	        ;;
+	    esac
+	    link_all_deplibs_CXX=yes
 
-      ;;
+	    output_verbose_link_cmd='echo'
 
-    hpux9* | hpux10* | hpux11*)
-      lt_prog_compiler_wl_GCJ='-Wl,'
-      # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
-      # not for PA HP-UX.
-      case $host_cpu in
-      hppa*64*|ia64*)
-	# +Z the default
-	;;
-      *)
-	lt_prog_compiler_pic_GCJ='+Z'
-	;;
-      esac
-      # Is there a better lt_prog_compiler_static that works with the bundled CC?
-      lt_prog_compiler_static_GCJ='${wl}-a ${wl}archive'
-      ;;
+	    # Archives containing C++ object files must be created using
+	    # "CC -xar", where "CC" is the Sun C++ compiler.  This is
+	    # necessary to make sure instantiated templates are included
+	    # in the archive.
+	    old_archive_cmds_CXX='$CC -xar -o $oldlib $oldobjs'
+	    ;;
+          gcx*)
+	    # Green Hills C++ Compiler
+	    archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
 
-    irix5* | irix6* | nonstopux*)
-      lt_prog_compiler_wl_GCJ='-Wl,'
-      # PIC (with -KPIC) is the default.
-      lt_prog_compiler_static_GCJ='-non_shared'
-      ;;
+	    # The C++ compiler must be used to create the archive.
+	    old_archive_cmds_CXX='$CC $LDFLAGS -archive -o $oldlib $oldobjs'
+	    ;;
+          *)
+	    # GNU C++ compiler with Solaris linker
+	    if test "$GXX" = yes && test "$with_gnu_ld" = no; then
+	      no_undefined_flag_CXX=' ${wl}-z ${wl}defs'
+	      if $CC --version | $GREP -v '^2\.7' > /dev/null; then
+	        archive_cmds_CXX='$CC -shared -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
+	        archive_expsym_cmds_CXX='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+		  $CC -shared -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
+
+	        # Commands to make compiler produce verbose output that lists
+	        # what "hidden" libraries, object files and flags are used when
+	        # linking a shared library.
+	        output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"'
+	      else
+	        # g++ 2.7 appears to require `-G' NOT `-shared' on this
+	        # platform.
+	        archive_cmds_CXX='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
+	        archive_expsym_cmds_CXX='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+		  $CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
+
+	        # Commands to make compiler produce verbose output that lists
+	        # what "hidden" libraries, object files and flags are used when
+	        # linking a shared library.
+	        output_verbose_link_cmd='$CC -G $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"'
+	      fi
 
-    newsos6)
-      lt_prog_compiler_pic_GCJ='-KPIC'
-      lt_prog_compiler_static_GCJ='-Bstatic'
-      ;;
+	      hardcode_libdir_flag_spec_CXX='${wl}-R $wl$libdir'
+	      case $host_os in
+		solaris2.[0-5] | solaris2.[0-5].*) ;;
+		*)
+		  whole_archive_flag_spec_CXX='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
+		  ;;
+	      esac
+	    fi
+	    ;;
+        esac
+        ;;
+
+    sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*)
+      no_undefined_flag_CXX='${wl}-z,text'
+      archive_cmds_need_lc_CXX=no
+      hardcode_shlibpath_var_CXX=no
+      runpath_var='LD_RUN_PATH'
 
-    linux* | k*bsd*-gnu)
       case $cc_basename in
-      icc* | ecc*)
-	lt_prog_compiler_wl_GCJ='-Wl,'
-	lt_prog_compiler_pic_GCJ='-KPIC'
-	lt_prog_compiler_static_GCJ='-static'
-        ;;
-      pgcc* | pgf77* | pgf90* | pgf95*)
-        # Portland Group compilers (*not* the Pentium gcc compiler,
-	# which looks to be a dead project)
-	lt_prog_compiler_wl_GCJ='-Wl,'
-	lt_prog_compiler_pic_GCJ='-fpic'
-	lt_prog_compiler_static_GCJ='-Bstatic'
-        ;;
-      ccc*)
-        lt_prog_compiler_wl_GCJ='-Wl,'
-        # All Alpha code is PIC.
-        lt_prog_compiler_static_GCJ='-non_shared'
-        ;;
-      *)
-        case `$CC -V 2>&1 | sed 5q` in
-	*Sun\ C*)
-	  # Sun C 5.9
-	  lt_prog_compiler_pic_GCJ='-KPIC'
-	  lt_prog_compiler_static_GCJ='-Bstatic'
-	  lt_prog_compiler_wl_GCJ='-Wl,'
+        CC*)
+	  archive_cmds_CXX='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  archive_expsym_cmds_CXX='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
 	  ;;
-	*Sun\ F*)
-	  # Sun Fortran 8.3 passes all unrecognized flags to the linker
-	  lt_prog_compiler_pic_GCJ='-KPIC'
-	  lt_prog_compiler_static_GCJ='-Bstatic'
-	  lt_prog_compiler_wl_GCJ=''
+	*)
+	  archive_cmds_CXX='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  archive_expsym_cmds_CXX='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
 	  ;;
-	esac
-	;;
       esac
       ;;
 
-    osf3* | osf4* | osf5*)
-      lt_prog_compiler_wl_GCJ='-Wl,'
-      # All OSF/1 code is PIC.
-      lt_prog_compiler_static_GCJ='-non_shared'
-      ;;
+      sysv5* | sco3.2v5* | sco5v6*)
+	# Note: We can NOT use -z defs as we might desire, because we do not
+	# link with -lc, and that would cause any symbols used from libc to
+	# always be unresolved, which means just about no library would
+	# ever link correctly.  If we're not using GNU ld we use -z text
+	# though, which does catch some bad symbols but isn't as heavy-handed
+	# as -z defs.
+	no_undefined_flag_CXX='${wl}-z,text'
+	allow_undefined_flag_CXX='${wl}-z,nodefs'
+	archive_cmds_need_lc_CXX=no
+	hardcode_shlibpath_var_CXX=no
+	hardcode_libdir_flag_spec_CXX='${wl}-R,$libdir'
+	hardcode_libdir_separator_CXX=':'
+	link_all_deplibs_CXX=yes
+	export_dynamic_flag_spec_CXX='${wl}-Bexport'
+	runpath_var='LD_RUN_PATH'
 
-    rdos*)
-      lt_prog_compiler_static_GCJ='-non_shared'
+	case $cc_basename in
+          CC*)
+	    archive_cmds_CXX='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	    archive_expsym_cmds_CXX='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	    ;;
+	  *)
+	    archive_cmds_CXX='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	    archive_expsym_cmds_CXX='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	    ;;
+	esac
       ;;
 
-    solaris*)
-      lt_prog_compiler_pic_GCJ='-KPIC'
-      lt_prog_compiler_static_GCJ='-Bstatic'
-      case $cc_basename in
-      f77* | f90* | f95*)
-	lt_prog_compiler_wl_GCJ='-Qoption ld ';;
-      *)
-	lt_prog_compiler_wl_GCJ='-Wl,';;
-      esac
-      ;;
+      tandem*)
+        case $cc_basename in
+          NCC*)
+	    # NonStop-UX NCC 3.20
+	    # FIXME: insert proper C++ library support
+	    ld_shlibs_CXX=no
+	    ;;
+          *)
+	    # FIXME: insert proper C++ library support
+	    ld_shlibs_CXX=no
+	    ;;
+        esac
+        ;;
 
-    sunos4*)
-      lt_prog_compiler_wl_GCJ='-Qoption ld '
-      lt_prog_compiler_pic_GCJ='-PIC'
-      lt_prog_compiler_static_GCJ='-Bstatic'
-      ;;
+      vxworks*)
+        # FIXME: insert proper C++ library support
+        ld_shlibs_CXX=no
+        ;;
 
-    sysv4 | sysv4.2uw2* | sysv4.3*)
-      lt_prog_compiler_wl_GCJ='-Wl,'
-      lt_prog_compiler_pic_GCJ='-KPIC'
-      lt_prog_compiler_static_GCJ='-Bstatic'
-      ;;
+      *)
+        # FIXME: insert proper C++ library support
+        ld_shlibs_CXX=no
+        ;;
+    esac
 
-    sysv4*MP*)
-      if test -d /usr/nec ;then
-	lt_prog_compiler_pic_GCJ='-Kconform_pic'
-	lt_prog_compiler_static_GCJ='-Bstatic'
-      fi
-      ;;
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ld_shlibs_CXX" >&5
+$as_echo "$ld_shlibs_CXX" >&6; }
+    test "$ld_shlibs_CXX" = no && can_build_shared=no
 
-    sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
-      lt_prog_compiler_wl_GCJ='-Wl,'
-      lt_prog_compiler_pic_GCJ='-KPIC'
-      lt_prog_compiler_static_GCJ='-Bstatic'
-      ;;
+    GCC_CXX="$GXX"
+    LD_CXX="$LD"
 
-    unicos*)
-      lt_prog_compiler_wl_GCJ='-Wl,'
-      lt_prog_compiler_can_build_shared_GCJ=no
-      ;;
+    ## CAVEAT EMPTOR:
+    ## There is no encapsulation within the following macros, do not change
+    ## the running order or otherwise move them around unless you know exactly
+    ## what you are doing...
+    # Dependencies to place before and after the object being linked:
+predep_objects_CXX=
+postdep_objects_CXX=
+predeps_CXX=
+postdeps_CXX=
+compiler_lib_search_path_CXX=
 
-    uts4*)
-      lt_prog_compiler_pic_GCJ='-pic'
-      lt_prog_compiler_static_GCJ='-Bstatic'
-      ;;
+cat > conftest.$ac_ext <<_LT_EOF
+class Foo
+{
+public:
+  Foo (void) { a = 0; }
+private:
+  int a;
+};
+_LT_EOF
 
-    *)
-      lt_prog_compiler_can_build_shared_GCJ=no
-      ;;
-    esac
-  fi
+if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
+  # Parse the compiler output and extract the necessary
+  # objects, libraries and library flags.
 
-{ $as_echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_GCJ" >&5
-$as_echo "$lt_prog_compiler_pic_GCJ" >&6; }
+  # Sentinel used to keep track of whether or not we are before
+  # the conftest object file.
+  pre_test_object_deps_done=no
 
-#
-# Check to make sure the PIC flag actually works.
-#
-if test -n "$lt_prog_compiler_pic_GCJ"; then
+  for p in `eval "$output_verbose_link_cmd"`; do
+    case $p in
 
-{ $as_echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic_GCJ works" >&5
-$as_echo_n "checking if $compiler PIC flag $lt_prog_compiler_pic_GCJ works... " >&6; }
-if test "${lt_cv_prog_compiler_pic_works_GCJ+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
-  lt_cv_prog_compiler_pic_works_GCJ=no
-  ac_outfile=conftest.$ac_objext
-   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
-   lt_compiler_flag="$lt_prog_compiler_pic_GCJ"
-   # Insert the option either (1) after the last *FLAGS variable, or
-   # (2) before a word containing "conftest.", or (3) at the end.
-   # Note that $ac_compile itself does not contain backslashes and begins
-   # with a dollar sign (not a hyphen), so the echo should work correctly.
-   # The option is referenced via a variable to avoid confusing sed.
-   lt_compile=`echo "$ac_compile" | $SED \
-   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-   -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:17909: $lt_compile\"" >&5)
-   (eval "$lt_compile" 2>conftest.err)
-   ac_status=$?
-   cat conftest.err >&5
-   echo "$as_me:17913: \$? = $ac_status" >&5
-   if (exit $ac_status) && test -s "$ac_outfile"; then
-     # The compiler can only warn and ignore the option if not recognized
-     # So say no if there are warnings other than the usual output.
-     $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
-     $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
-     if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
-       lt_cv_prog_compiler_pic_works_GCJ=yes
-     fi
-   fi
-   $rm conftest*
+    -L* | -R* | -l*)
+       # Some compilers place space between "-{L,R}" and the path.
+       # Remove the space.
+       if test $p = "-L" ||
+          test $p = "-R"; then
+	 prev=$p
+	 continue
+       else
+	 prev=
+       fi
 
-fi
-{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_pic_works_GCJ" >&5
-$as_echo "$lt_cv_prog_compiler_pic_works_GCJ" >&6; }
+       if test "$pre_test_object_deps_done" = no; then
+	 case $p in
+	 -L* | -R*)
+	   # Internal compiler library paths should come after those
+	   # provided the user.  The postdeps already come after the
+	   # user supplied libs so there is no need to process them.
+	   if test -z "$compiler_lib_search_path_CXX"; then
+	     compiler_lib_search_path_CXX="${prev}${p}"
+	   else
+	     compiler_lib_search_path_CXX="${compiler_lib_search_path_CXX} ${prev}${p}"
+	   fi
+	   ;;
+	 # The "-l" case would never come before the object being
+	 # linked, so don't bother handling this case.
+	 esac
+       else
+	 if test -z "$postdeps_CXX"; then
+	   postdeps_CXX="${prev}${p}"
+	 else
+	   postdeps_CXX="${postdeps_CXX} ${prev}${p}"
+	 fi
+       fi
+       ;;
 
-if test x"$lt_cv_prog_compiler_pic_works_GCJ" = xyes; then
-    case $lt_prog_compiler_pic_GCJ in
-     "" | " "*) ;;
-     *) lt_prog_compiler_pic_GCJ=" $lt_prog_compiler_pic_GCJ" ;;
-     esac
+    *.$objext)
+       # This assumes that the test object file only shows up
+       # once in the compiler output.
+       if test "$p" = "conftest.$objext"; then
+	 pre_test_object_deps_done=yes
+	 continue
+       fi
+
+       if test "$pre_test_object_deps_done" = no; then
+	 if test -z "$predep_objects_CXX"; then
+	   predep_objects_CXX="$p"
+	 else
+	   predep_objects_CXX="$predep_objects_CXX $p"
+	 fi
+       else
+	 if test -z "$postdep_objects_CXX"; then
+	   postdep_objects_CXX="$p"
+	 else
+	   postdep_objects_CXX="$postdep_objects_CXX $p"
+	 fi
+       fi
+       ;;
+
+    *) ;; # Ignore the rest.
+
+    esac
+  done
+
+  # Clean up.
+  rm -f a.out a.exe
 else
-    lt_prog_compiler_pic_GCJ=
-     lt_prog_compiler_can_build_shared_GCJ=no
+  echo "libtool.m4: error: problem compiling CXX test program"
 fi
 
-fi
+$RM -f confest.$objext
+
+# PORTME: override above test on systems where it is broken
 case $host_os in
-  # For platforms which do not support PIC, -DPIC is meaningless:
-  *djgpp*)
-    lt_prog_compiler_pic_GCJ=
+interix[3-9]*)
+  # Interix 3.5 installs completely hosed .la files for C++, so rather than
+  # hack all around it, let's just trust "g++" to DTRT.
+  predep_objects_CXX=
+  postdep_objects_CXX=
+  postdeps_CXX=
+  ;;
+
+linux*)
+  case `$CC -V 2>&1 | sed 5q` in
+  *Sun\ C*)
+    # Sun C++ 5.9
+
+    # The more standards-conforming stlport4 library is
+    # incompatible with the Cstd library. Avoid specifying
+    # it if it's in CXXFLAGS. Ignore libCrun as
+    # -library=stlport4 depends on it.
+    case " $CXX $CXXFLAGS " in
+    *" -library=stlport4 "*)
+      solaris_use_stlport4=yes
+      ;;
+    esac
+
+    if test "$solaris_use_stlport4" != yes; then
+      postdeps_CXX='-library=Cstd -library=Crun'
+    fi
     ;;
-  *)
-    lt_prog_compiler_pic_GCJ="$lt_prog_compiler_pic_GCJ"
+  esac
+  ;;
+
+solaris*)
+  case $cc_basename in
+  CC*)
+    # The more standards-conforming stlport4 library is
+    # incompatible with the Cstd library. Avoid specifying
+    # it if it's in CXXFLAGS. Ignore libCrun as
+    # -library=stlport4 depends on it.
+    case " $CXX $CXXFLAGS " in
+    *" -library=stlport4 "*)
+      solaris_use_stlport4=yes
+      ;;
+    esac
+
+    # Adding this requires a known-good setup of shared libraries for
+    # Sun compiler versions before 5.6, else PIC objects from an old
+    # archive will be linked into the output, leading to subtle bugs.
+    if test "$solaris_use_stlport4" != yes; then
+      postdeps_CXX='-library=Cstd -library=Crun'
+    fi
     ;;
+  esac
+  ;;
 esac
 
-#
-# Check to make sure the static flag actually works.
-#
-wl=$lt_prog_compiler_wl_GCJ eval lt_tmp_static_flag=\"$lt_prog_compiler_static_GCJ\"
-{ $as_echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5
-$as_echo_n "checking if $compiler static flag $lt_tmp_static_flag works... " >&6; }
-if test "${lt_cv_prog_compiler_static_works_GCJ+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
-  lt_cv_prog_compiler_static_works_GCJ=no
-   save_LDFLAGS="$LDFLAGS"
-   LDFLAGS="$LDFLAGS $lt_tmp_static_flag"
-   echo "$lt_simple_link_test_code" > conftest.$ac_ext
-   if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
-     # The linker can only warn and ignore the option if not recognized
-     # So say no if there are warnings
-     if test -s conftest.err; then
-       # Append any errors to the config.log.
-       cat conftest.err 1>&5
-       $echo "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp
-       $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
-       if diff conftest.exp conftest.er2 >/dev/null; then
-         lt_cv_prog_compiler_static_works_GCJ=yes
-       fi
-     else
-       lt_cv_prog_compiler_static_works_GCJ=yes
-     fi
-   fi
-   $rm -r conftest*
-   LDFLAGS="$save_LDFLAGS"
 
+case " $postdeps_CXX " in
+*" -lc "*) archive_cmds_need_lc_CXX=no ;;
+esac
+ compiler_lib_search_dirs_CXX=
+if test -n "${compiler_lib_search_path_CXX}"; then
+ compiler_lib_search_dirs_CXX=`echo " ${compiler_lib_search_path_CXX}" | ${SED} -e 's! -L! !g' -e 's!^ !!'`
 fi
-{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_static_works_GCJ" >&5
-$as_echo "$lt_cv_prog_compiler_static_works_GCJ" >&6; }
 
-if test x"$lt_cv_prog_compiler_static_works_GCJ" = xyes; then
-    :
-else
-    lt_prog_compiler_static_GCJ=
-fi
 
 
-{ $as_echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5
-$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; }
-if test "${lt_cv_prog_compiler_c_o_GCJ+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
-  lt_cv_prog_compiler_c_o_GCJ=no
-   $rm -r conftest 2>/dev/null
-   mkdir conftest
-   cd conftest
-   mkdir out
-   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
 
-   lt_compiler_flag="-o out/conftest2.$ac_objext"
-   # Insert the option either (1) after the last *FLAGS variable, or
-   # (2) before a word containing "conftest.", or (3) at the end.
-   # Note that $ac_compile itself does not contain backslashes and begins
-   # with a dollar sign (not a hyphen), so the echo should work correctly.
-   lt_compile=`echo "$ac_compile" | $SED \
-   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-   -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:18013: $lt_compile\"" >&5)
-   (eval "$lt_compile" 2>out/conftest.err)
-   ac_status=$?
-   cat out/conftest.err >&5
-   echo "$as_me:18017: \$? = $ac_status" >&5
-   if (exit $ac_status) && test -s out/conftest2.$ac_objext
-   then
-     # The compiler can only warn and ignore the option if not recognized
-     # So say no if there are warnings
-     $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
-     $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
-     if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
-       lt_cv_prog_compiler_c_o_GCJ=yes
-     fi
-   fi
-   chmod u+w . 2>&5
-   $rm conftest*
-   # SGI C++ compiler will create directory out/ii_files/ for
-   # template instantiation
-   test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files
-   $rm out/* && rmdir out
-   cd ..
-   rmdir conftest
-   $rm conftest*
 
-fi
-{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o_GCJ" >&5
-$as_echo "$lt_cv_prog_compiler_c_o_GCJ" >&6; }
 
 
-hard_links="nottested"
-if test "$lt_cv_prog_compiler_c_o_GCJ" = no && test "$need_locks" != no; then
-  # do not overwrite the value of need_locks provided by the user
-  { $as_echo "$as_me:$LINENO: checking if we can lock with hard links" >&5
-$as_echo_n "checking if we can lock with hard links... " >&6; }
-  hard_links=yes
-  $rm conftest*
-  ln conftest.a conftest.b 2>/dev/null && hard_links=no
-  touch conftest.a
-  ln conftest.a conftest.b 2>&5 || hard_links=no
-  ln conftest.a conftest.b 2>/dev/null && hard_links=no
-  { $as_echo "$as_me:$LINENO: result: $hard_links" >&5
-$as_echo "$hard_links" >&6; }
-  if test "$hard_links" = no; then
-    { $as_echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5
-$as_echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;}
-    need_locks=warn
-  fi
-else
-  need_locks=no
-fi
 
-{ $as_echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5
-$as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; }
 
-  runpath_var=
-  allow_undefined_flag_GCJ=
-  enable_shared_with_static_runtimes_GCJ=no
-  archive_cmds_GCJ=
-  archive_expsym_cmds_GCJ=
-  old_archive_From_new_cmds_GCJ=
-  old_archive_from_expsyms_cmds_GCJ=
-  export_dynamic_flag_spec_GCJ=
-  whole_archive_flag_spec_GCJ=
-  thread_safe_flag_spec_GCJ=
-  hardcode_libdir_flag_spec_GCJ=
-  hardcode_libdir_flag_spec_ld_GCJ=
-  hardcode_libdir_separator_GCJ=
-  hardcode_direct_GCJ=no
-  hardcode_minus_L_GCJ=no
-  hardcode_shlibpath_var_GCJ=unsupported
-  link_all_deplibs_GCJ=unknown
-  hardcode_automatic_GCJ=no
-  module_cmds_GCJ=
-  module_expsym_cmds_GCJ=
-  always_export_symbols_GCJ=no
-  export_symbols_cmds_GCJ='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
-  # include_expsyms should be a list of space-separated symbols to be *always*
-  # included in the symbol list
-  include_expsyms_GCJ=
-  # exclude_expsyms can be an extended regexp of symbols to exclude
-  # it will be wrapped by ` (' and `)$', so one must not match beginning or
-  # end of line.  Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
-  # as well as any symbol that contains `d'.
-  exclude_expsyms_GCJ='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'
-  # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
-  # platforms (ab)use it in PIC code, but their linkers get confused if
-  # the symbol is explicitly referenced.  Since portable code cannot
-  # rely on this symbol name, it's probably fine to never include it in
-  # preloaded symbol tables.
-  # Exclude shared library initialization/finalization symbols.
-  extract_expsyms_cmds=
-  # Just being paranoid about ensuring that cc_basename is set.
-  for cc_temp in $compiler""; do
-  case $cc_temp in
-    compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
-    distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
-    \-*) ;;
-    *) break;;
-  esac
-done
-cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
 
-  case $host_os in
-  cygwin* | mingw* | pw32*)
-    # FIXME: the MSVC++ port hasn't been tested in a loooong time
-    # When not using gcc, we currently assume that we are using
-    # Microsoft Visual C++.
-    if test "$GCC" != yes; then
-      with_gnu_ld=no
-    fi
-    ;;
-  interix*)
-    # we just hope/assume this is gcc and not c89 (= MSVC++)
-    with_gnu_ld=yes
-    ;;
-  openbsd*)
-    with_gnu_ld=no
-    ;;
-  esac
 
-  ld_shlibs_GCJ=yes
-  if test "$with_gnu_ld" = yes; then
-    # If archive_cmds runs LD, not CC, wlarc should be empty
-    wlarc='${wl}'
 
-    # Set some defaults for GNU ld with shared library support. These
-    # are reset later if shared libraries are not supported. Putting them
-    # here allows them to be overridden if necessary.
-    runpath_var=LD_RUN_PATH
-    hardcode_libdir_flag_spec_GCJ='${wl}--rpath ${wl}$libdir'
-    export_dynamic_flag_spec_GCJ='${wl}--export-dynamic'
-    # ancient GNU ld didn't support --whole-archive et. al.
-    if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then
-	whole_archive_flag_spec_GCJ="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
-      else
-  	whole_archive_flag_spec_GCJ=
-    fi
-    supports_anon_versioning=no
-    case `$LD -v 2>/dev/null` in
-      *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11
-      *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
-      *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
-      *\ 2.11.*) ;; # other 2.11 versions
-      *) supports_anon_versioning=yes ;;
-    esac
 
-    # See if GNU ld supports shared libraries.
-    case $host_os in
-    aix[3-9]*)
-      # On AIX/PPC, the GNU linker is very broken
-      if test "$host_cpu" != ia64; then
-	ld_shlibs_GCJ=no
-	cat <<EOF 1>&2
 
-*** Warning: the GNU linker, at least up to release 2.9.1, is reported
-*** to be unable to reliably create shared libraries on AIX.
-*** Therefore, libtool is disabling shared libraries support.  If you
-*** really care for shared libraries, you may want to modify your PATH
-*** so that a non-GNU linker is found, and then restart.
 
-EOF
-      fi
-      ;;
 
-    amigaos*)
-      archive_cmds_GCJ='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
-      hardcode_libdir_flag_spec_GCJ='-L$libdir'
-      hardcode_minus_L_GCJ=yes
-
-      # Samuel A. Falvo II <kc5tja@dolphin.openprojects.net> reports
-      # that the semantics of dynamic libraries on AmigaOS, at least up
-      # to version 4, is to share data among multiple programs linked
-      # with the same dynamic library.  Since this doesn't match the
-      # behavior of shared libraries on other platforms, we can't use
-      # them.
-      ld_shlibs_GCJ=no
-      ;;
 
-    beos*)
-      if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-	allow_undefined_flag_GCJ=unsupported
-	# Joseph Beckenbach <jrb3@best.com> says some releases of gcc
-	# support --undefined.  This deserves some investigation.  FIXME
-	archive_cmds_GCJ='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-      else
-	ld_shlibs_GCJ=no
-      fi
-      ;;
 
-    cygwin* | mingw* | pw32*)
-      # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, GCJ) is actually meaningless,
-      # as there is no search path for DLLs.
-      hardcode_libdir_flag_spec_GCJ='-L$libdir'
-      allow_undefined_flag_GCJ=unsupported
-      always_export_symbols_GCJ=no
-      enable_shared_with_static_runtimes_GCJ=yes
-      export_symbols_cmds_GCJ='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/'\'' -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols'
 
-      if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
-        archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
-	# If the export-symbols file already is a .def file (1st line
-	# is EXPORTS), use it as is; otherwise, prepend...
-	archive_expsym_cmds_GCJ='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
-	  cp $export_symbols $output_objdir/$soname.def;
-	else
-	  echo EXPORTS > $output_objdir/$soname.def;
-	  cat $export_symbols >> $output_objdir/$soname.def;
-	fi~
-	$CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
-      else
-	ld_shlibs_GCJ=no
-      fi
-      ;;
 
-    interix[3-9]*)
-      hardcode_direct_GCJ=no
-      hardcode_shlibpath_var_GCJ=no
-      hardcode_libdir_flag_spec_GCJ='${wl}-rpath,$libdir'
-      export_dynamic_flag_spec_GCJ='${wl}-E'
-      # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
-      # Instead, shared libraries are loaded at an image base (0x10000000 by
-      # default) and relocated if they conflict, which is a slow very memory
-      # consuming and fragmenting process.  To avoid this, we pick a random,
-      # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
-      # time.  Moving up from 0x10000000 also allows more sbrk(2) space.
-      archive_cmds_GCJ='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
-      archive_expsym_cmds_GCJ='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
-      ;;
 
-    gnu* | linux* | k*bsd*-gnu)
-      if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-	tmp_addflag=
-	case $cc_basename,$host_cpu in
-	pgcc*)				# Portland Group C compiler
-	  whole_archive_flag_spec_GCJ='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
-	  tmp_addflag=' $pic_flag'
-	  ;;
-	pgf77* | pgf90* | pgf95*)	# Portland Group f77 and f90 compilers
-	  whole_archive_flag_spec_GCJ='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
-	  tmp_addflag=' $pic_flag -Mnomain' ;;
-	ecc*,ia64* | icc*,ia64*)		# Intel C compiler on ia64
-	  tmp_addflag=' -i_dynamic' ;;
-	efc*,ia64* | ifort*,ia64*)	# Intel Fortran compiler on ia64
-	  tmp_addflag=' -i_dynamic -nofor_main' ;;
-	ifc* | ifort*)			# Intel Fortran compiler
-	  tmp_addflag=' -nofor_main' ;;
-	esac
-	case `$CC -V 2>&1 | sed 5q` in
-	*Sun\ C*)			# Sun C 5.9
-	  whole_archive_flag_spec_GCJ='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
-	  tmp_sharedflag='-G' ;;
-	*Sun\ F*)			# Sun Fortran 8.3
-	  tmp_sharedflag='-G' ;;
-	*)
-	  tmp_sharedflag='-shared' ;;
-	esac
-	archive_cmds_GCJ='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
 
-	if test $supports_anon_versioning = yes; then
-	  archive_expsym_cmds_GCJ='$echo "{ global:" > $output_objdir/$libname.ver~
-  cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
-  $echo "local: *; };" >> $output_objdir/$libname.ver~
-	  $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
-	fi
-	link_all_deplibs_GCJ=no
-      else
-	ld_shlibs_GCJ=no
-      fi
-      ;;
 
-    netbsd*)
-      if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-	archive_cmds_GCJ='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
-	wlarc=
-      else
-	archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-	archive_expsym_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-      fi
-      ;;
 
-    solaris*)
-      if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then
-	ld_shlibs_GCJ=no
-	cat <<EOF 1>&2
 
-*** Warning: The releases 2.8.* of the GNU linker cannot reliably
-*** create shared libraries on Solaris systems.  Therefore, libtool
-*** is disabling shared libraries support.  We urge you to upgrade GNU
-*** binutils to release 2.9.1 or newer.  Another option is to modify
-*** your PATH or compiler configuration so that the native linker is
-*** used, and then restart.
 
-EOF
-      elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-	archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-	archive_expsym_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-      else
-	ld_shlibs_GCJ=no
+
+
+
+
+
+    lt_prog_compiler_wl_CXX=
+lt_prog_compiler_pic_CXX=
+lt_prog_compiler_static_CXX=
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $compiler option to produce PIC" >&5
+$as_echo_n "checking for $compiler option to produce PIC... " >&6; }
+
+  # C++ specific cases for pic, static, wl, etc.
+  if test "$GXX" = yes; then
+    lt_prog_compiler_wl_CXX='-Wl,'
+    lt_prog_compiler_static_CXX='-static'
+
+    case $host_os in
+    aix*)
+      # All AIX code is PIC.
+      if test "$host_cpu" = ia64; then
+	# AIX 5 now supports IA64 processor
+	lt_prog_compiler_static_CXX='-Bstatic'
       fi
       ;;
 
-    sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
-      case `$LD -v 2>&1` in
-        *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*)
-	ld_shlibs_GCJ=no
-	cat <<_LT_EOF 1>&2
-
-*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not
-*** reliably create shared libraries on SCO systems.  Therefore, libtool
-*** is disabling shared libraries support.  We urge you to upgrade GNU
-*** binutils to release 2.16.91.0.3 or newer.  Another option is to modify
-*** your PATH or compiler configuration so that the native linker is
-*** used, and then restart.
+    amigaos*)
+      case $host_cpu in
+      powerpc)
+            # see comment about AmigaOS4 .so support
+            lt_prog_compiler_pic_CXX='-fPIC'
+        ;;
+      m68k)
+            # FIXME: we need at least 68020 code to build shared libraries, but
+            # adding the `-m68020' flag to GCC prevents building anything better,
+            # like `-m68040'.
+            lt_prog_compiler_pic_CXX='-m68020 -resident32 -malways-restore-a4'
+        ;;
+      esac
+      ;;
 
-_LT_EOF
+    beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
+      # PIC is the default for these OSes.
+      ;;
+    mingw* | cygwin* | os2* | pw32* | cegcc*)
+      # This hack is so that the source file can tell whether it is being
+      # built for inclusion in a dll (and should export symbols for example).
+      # Although the cygwin gcc ignores -fPIC, still need this for old-style
+      # (--disable-auto-import) libraries
+      lt_prog_compiler_pic_CXX='-DDLL_EXPORT'
+      ;;
+    darwin* | rhapsody*)
+      # PIC is the default on this platform
+      # Common symbols not allowed in MH_DYLIB files
+      lt_prog_compiler_pic_CXX='-fno-common'
+      ;;
+    *djgpp*)
+      # DJGPP does not support shared libraries at all
+      lt_prog_compiler_pic_CXX=
+      ;;
+    interix[3-9]*)
+      # Interix 3.x gcc -fpic/-fPIC options generate broken code.
+      # Instead, we relocate shared libraries at runtime.
+      ;;
+    sysv4*MP*)
+      if test -d /usr/nec; then
+	lt_prog_compiler_pic_CXX=-Kconform_pic
+      fi
+      ;;
+    hpux*)
+      # PIC is the default for 64-bit PA HP-UX, but not for 32-bit
+      # PA HP-UX.  On IA64 HP-UX, PIC is the default but the pic flag
+      # sets the default TLS model and affects inlining.
+      case $host_cpu in
+      hppa*64*)
 	;;
-	*)
-	  if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-	    hardcode_libdir_flag_spec_GCJ='`test -z "$SCOABSPATH" && echo ${wl}-rpath,$libdir`'
-	    archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib'
-	    archive_expsym_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname,-retain-symbols-file,$export_symbols -o $lib'
-	  else
-	    ld_shlibs_GCJ=no
-	  fi
+      *)
+	lt_prog_compiler_pic_CXX='-fPIC'
 	;;
       esac
       ;;
-
-    sunos4*)
-      archive_cmds_GCJ='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-      wlarc=
-      hardcode_direct_GCJ=yes
-      hardcode_shlibpath_var_GCJ=no
+    *qnx* | *nto*)
+      # QNX uses GNU C++, but need to define -shared option too, otherwise
+      # it will coredump.
+      lt_prog_compiler_pic_CXX='-fPIC -shared'
       ;;
-
     *)
-      if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-	archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-	archive_expsym_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-      else
-	ld_shlibs_GCJ=no
-      fi
+      lt_prog_compiler_pic_CXX='-fPIC'
       ;;
     esac
-
-    if test "$ld_shlibs_GCJ" = no; then
-      runpath_var=
-      hardcode_libdir_flag_spec_GCJ=
-      export_dynamic_flag_spec_GCJ=
-      whole_archive_flag_spec_GCJ=
-    fi
   else
-    # PORTME fill in a description of your system's linker (not GNU ld)
     case $host_os in
-    aix3*)
-      allow_undefined_flag_GCJ=unsupported
-      always_export_symbols_GCJ=yes
-      archive_expsym_cmds_GCJ='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
-      # Note: this linker hardcodes the directories in LIBPATH if there
-      # are no directories specified by -L.
-      hardcode_minus_L_GCJ=yes
-      if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then
-	# Neither direct hardcoding nor static linking is supported with a
-	# broken collect2.
-	hardcode_direct_GCJ=unsupported
-      fi
-      ;;
-
-    aix[4-9]*)
-      if test "$host_cpu" = ia64; then
-	# On IA64, the linker does run time linking by default, so we don't
-	# have to do anything special.
-	aix_use_runtimelinking=no
-	exp_sym_flag='-Bexport'
-	no_entry_flag=""
-      else
-	# If we're using GNU nm, then we don't want the "-C" option.
-	# -C means demangle to AIX nm, but means don't demangle with GNU nm
-	if $NM -V 2>&1 | grep 'GNU' > /dev/null; then
-	  export_symbols_cmds_GCJ='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols'
-	else
-	  export_symbols_cmds_GCJ='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols'
-	fi
-	aix_use_runtimelinking=no
-
-	# Test if we are trying to use run time linking or normal
-	# AIX style linking. If -brtl is somewhere in LDFLAGS, we
-	# need to do runtime linking.
-	case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*)
-	  for ld_flag in $LDFLAGS; do
-  	  if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
-  	    aix_use_runtimelinking=yes
-  	    break
-  	  fi
-	  done
-	  ;;
-	esac
-
-	exp_sym_flag='-bexport'
-	no_entry_flag='-bnoentry'
-      fi
-
-      # When large executables or shared objects are built, AIX ld can
-      # have problems creating the table of contents.  If linking a library
-      # or program results in "error TOC overflow" add -mminimal-toc to
-      # CXXFLAGS/CFLAGS for g++/gcc.  In the cases where that is not
-      # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
-
-      archive_cmds_GCJ=''
-      hardcode_direct_GCJ=yes
-      hardcode_libdir_separator_GCJ=':'
-      link_all_deplibs_GCJ=yes
-
-      if test "$GCC" = yes; then
-	case $host_os in aix4.[012]|aix4.[012].*)
-	# We only want to do this on AIX 4.2 and lower, the check
-	# below for broken collect2 doesn't work under 4.3+
-	  collect2name=`${CC} -print-prog-name=collect2`
-	  if test -f "$collect2name" && \
-  	   strings "$collect2name" | grep resolve_lib_name >/dev/null
-	  then
-  	  # We have reworked collect2
-  	  :
-	  else
-  	  # We have old collect2
-  	  hardcode_direct_GCJ=unsupported
-  	  # It fails to find uninstalled libraries when the uninstalled
-  	  # path is not listed in the libpath.  Setting hardcode_minus_L
-  	  # to unsupported forces relinking
-  	  hardcode_minus_L_GCJ=yes
-  	  hardcode_libdir_flag_spec_GCJ='-L$libdir'
-  	  hardcode_libdir_separator_GCJ=
-	  fi
-	  ;;
-	esac
-	shared_flag='-shared'
-	if test "$aix_use_runtimelinking" = yes; then
-	  shared_flag="$shared_flag "'${wl}-G'
-	fi
-      else
-	# not using gcc
-	if test "$host_cpu" = ia64; then
-  	# VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
-  	# chokes on -Wl,-G. The following line is correct:
-	  shared_flag='-G'
-	else
-	  if test "$aix_use_runtimelinking" = yes; then
-	    shared_flag='${wl}-G'
-	  else
-	    shared_flag='${wl}-bM:SRE'
-	  fi
-	fi
-      fi
-
-      # It seems that -bexpall does not export symbols beginning with
-      # underscore (_), so it is better to generate a list of symbols to export.
-      always_export_symbols_GCJ=yes
-      if test "$aix_use_runtimelinking" = yes; then
-	# Warning - without using the other runtime loading flags (-brtl),
-	# -berok will link without error, but may produce a broken library.
-	allow_undefined_flag_GCJ='-berok'
-       # Determine the default libpath from the value encoded in an empty executable.
-       cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-int
-main ()
-{
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_link") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest$ac_exeext && {
-	 test "$cross_compiling" = yes ||
-	 $as_test_x conftest$ac_exeext
-       }; then
-
-lt_aix_libpath_sed='
-    /Import File Strings/,/^$/ {
-	/^0/ {
-	    s/^0  *\(.*\)$/\1/
-	    p
-	}
-    }'
-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-# Check for a 64-bit object if we didn't find anything.
-if test -z "$aix_libpath"; then
-  aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-fi
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-
-fi
-
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-      conftest$ac_exeext conftest.$ac_ext
-if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
-
-       hardcode_libdir_flag_spec_GCJ='${wl}-blibpath:$libdir:'"$aix_libpath"
-	archive_expsym_cmds_GCJ="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
-       else
+      aix[4-9]*)
+	# All AIX code is PIC.
 	if test "$host_cpu" = ia64; then
-	  hardcode_libdir_flag_spec_GCJ='${wl}-R $libdir:/usr/lib:/lib'
-	  allow_undefined_flag_GCJ="-z nodefs"
-	  archive_expsym_cmds_GCJ="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
+	  # AIX 5 now supports IA64 processor
+	  lt_prog_compiler_static_CXX='-Bstatic'
 	else
-	 # Determine the default libpath from the value encoded in an empty executable.
-	 cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-int
-main ()
-{
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_link") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest$ac_exeext && {
-	 test "$cross_compiling" = yes ||
-	 $as_test_x conftest$ac_exeext
-       }; then
-
-lt_aix_libpath_sed='
-    /Import File Strings/,/^$/ {
-	/^0/ {
-	    s/^0  *\(.*\)$/\1/
-	    p
-	}
-    }'
-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-# Check for a 64-bit object if we didn't find anything.
-if test -z "$aix_libpath"; then
-  aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-fi
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-
-fi
-
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-      conftest$ac_exeext conftest.$ac_ext
-if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
-
-	 hardcode_libdir_flag_spec_GCJ='${wl}-blibpath:$libdir:'"$aix_libpath"
-	  # Warning - without using the other run time loading flags,
-	  # -berok will link without error, but may produce a broken library.
-	  no_undefined_flag_GCJ=' ${wl}-bernotok'
-	  allow_undefined_flag_GCJ=' ${wl}-berok'
-	  # Exported symbols can be pulled into shared objects from archives
-	  whole_archive_flag_spec_GCJ='$convenience'
-	  archive_cmds_need_lc_GCJ=yes
-	  # This is similar to how AIX traditionally builds its shared libraries.
-	  archive_expsym_cmds_GCJ="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
+	  lt_prog_compiler_static_CXX='-bnso -bI:/lib/syscalls.exp'
 	fi
-      fi
-      ;;
-
-    amigaos*)
-      archive_cmds_GCJ='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
-      hardcode_libdir_flag_spec_GCJ='-L$libdir'
-      hardcode_minus_L_GCJ=yes
-      # see comment about different semantics on the GNU ld section
-      ld_shlibs_GCJ=no
-      ;;
-
-    bsdi[45]*)
-      export_dynamic_flag_spec_GCJ=-rdynamic
-      ;;
-
-    cygwin* | mingw* | pw32*)
-      # When not using gcc, we currently assume that we are using
-      # Microsoft Visual C++.
-      # hardcode_libdir_flag_spec is actually meaningless, as there is
-      # no search path for DLLs.
-      hardcode_libdir_flag_spec_GCJ=' '
-      allow_undefined_flag_GCJ=unsupported
-      # Tell ltmain to make .lib files, not .a files.
-      libext=lib
-      # Tell ltmain to make .dll files, not .so files.
-      shrext_cmds=".dll"
-      # FIXME: Setting linknames here is a bad hack.
-      archive_cmds_GCJ='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames='
-      # The linker will automatically build a .lib file if we build a DLL.
-      old_archive_From_new_cmds_GCJ='true'
-      # FIXME: Should let the user specify the lib program.
-      old_archive_cmds_GCJ='lib -OUT:$oldlib$oldobjs$old_deplibs'
-      fix_srcfile_path_GCJ='`cygpath -w "$srcfile"`'
-      enable_shared_with_static_runtimes_GCJ=yes
-      ;;
-
-    darwin* | rhapsody*)
-      case $host_os in
-        rhapsody* | darwin1.[012])
-         allow_undefined_flag_GCJ='${wl}-undefined ${wl}suppress'
-         ;;
-       *) # Darwin 1.3 on
-         if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then
-           allow_undefined_flag_GCJ='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
-         else
-           case ${MACOSX_DEPLOYMENT_TARGET} in
-             10.[012])
-               allow_undefined_flag_GCJ='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
-               ;;
-             10.*)
-               allow_undefined_flag_GCJ='${wl}-undefined ${wl}dynamic_lookup'
-               ;;
-           esac
-         fi
-         ;;
-      esac
-      archive_cmds_need_lc_GCJ=no
-      hardcode_direct_GCJ=no
-      hardcode_automatic_GCJ=yes
-      hardcode_shlibpath_var_GCJ=unsupported
-      whole_archive_flag_spec_GCJ=''
-      link_all_deplibs_GCJ=yes
-    if test "$GCC" = yes ; then
-    	output_verbose_link_cmd='echo'
-        archive_cmds_GCJ="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}"
-        module_cmds_GCJ="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}"
-        archive_expsym_cmds_GCJ="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}"
-        module_expsym_cmds_GCJ="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}"
-    else
-      case $cc_basename in
-        xlc*)
-         output_verbose_link_cmd='echo'
-         archive_cmds_GCJ='$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $xlcverstring'
-         module_cmds_GCJ='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
-          # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
-         archive_expsym_cmds_GCJ='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $xlcverstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-          module_expsym_cmds_GCJ='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag  -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-          ;;
-       *)
-         ld_shlibs_GCJ=no
-          ;;
-      esac
-    fi
-      ;;
-
-    dgux*)
-      archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-      hardcode_libdir_flag_spec_GCJ='-L$libdir'
-      hardcode_shlibpath_var_GCJ=no
-      ;;
-
-    freebsd1*)
-      ld_shlibs_GCJ=no
-      ;;
-
-    # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
-    # support.  Future versions do this automatically, but an explicit c++rt0.o
-    # does not break anything, and helps significantly (at the cost of a little
-    # extra space).
-    freebsd2.2*)
-      archive_cmds_GCJ='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
-      hardcode_libdir_flag_spec_GCJ='-R$libdir'
-      hardcode_direct_GCJ=yes
-      hardcode_shlibpath_var_GCJ=no
-      ;;
-
-    # Unfortunately, older versions of FreeBSD 2 do not have this feature.
-    freebsd2*)
-      archive_cmds_GCJ='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-      hardcode_direct_GCJ=yes
-      hardcode_minus_L_GCJ=yes
-      hardcode_shlibpath_var_GCJ=no
-      ;;
-
-    # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
-    freebsd* | dragonfly*)
-      archive_cmds_GCJ='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
-      hardcode_libdir_flag_spec_GCJ='-R$libdir'
-      hardcode_direct_GCJ=yes
-      hardcode_shlibpath_var_GCJ=no
-      ;;
-
-    hpux9*)
-      if test "$GCC" = yes; then
-	archive_cmds_GCJ='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
-      else
-	archive_cmds_GCJ='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
-      fi
-      hardcode_libdir_flag_spec_GCJ='${wl}+b ${wl}$libdir'
-      hardcode_libdir_separator_GCJ=:
-      hardcode_direct_GCJ=yes
-
-      # hardcode_minus_L: Not really in the search PATH,
-      # but as the default location of the library.
-      hardcode_minus_L_GCJ=yes
-      export_dynamic_flag_spec_GCJ='${wl}-E'
-      ;;
-
-    hpux10*)
-      if test "$GCC" = yes -a "$with_gnu_ld" = no; then
-	archive_cmds_GCJ='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
-      else
-	archive_cmds_GCJ='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
-      fi
-      if test "$with_gnu_ld" = no; then
-	hardcode_libdir_flag_spec_GCJ='${wl}+b ${wl}$libdir'
-	hardcode_libdir_separator_GCJ=:
-
-	hardcode_direct_GCJ=yes
-	export_dynamic_flag_spec_GCJ='${wl}-E'
-
-	# hardcode_minus_L: Not really in the search PATH,
-	# but as the default location of the library.
-	hardcode_minus_L_GCJ=yes
-      fi
-      ;;
-
-    hpux11*)
-      if test "$GCC" = yes -a "$with_gnu_ld" = no; then
-	case $host_cpu in
-	hppa*64*)
-	  archive_cmds_GCJ='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-	  ;;
-	ia64*)
-	  archive_cmds_GCJ='$CC -shared ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
-	  ;;
-	*)
-	  archive_cmds_GCJ='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
-	  ;;
-	esac
-      else
-	case $host_cpu in
-	hppa*64*)
-	  archive_cmds_GCJ='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-	  ;;
-	ia64*)
-	  archive_cmds_GCJ='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
-	  ;;
-	*)
-	  archive_cmds_GCJ='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+	;;
+      chorus*)
+	case $cc_basename in
+	cxch68*)
+	  # Green Hills C++ Compiler
+	  # _LT_TAGVAR(lt_prog_compiler_static, CXX)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a"
 	  ;;
 	esac
-      fi
-      if test "$with_gnu_ld" = no; then
-	hardcode_libdir_flag_spec_GCJ='${wl}+b ${wl}$libdir'
-	hardcode_libdir_separator_GCJ=:
-
-	case $host_cpu in
-	hppa*64*|ia64*)
-	  hardcode_libdir_flag_spec_ld_GCJ='+b $libdir'
-	  hardcode_direct_GCJ=no
-	  hardcode_shlibpath_var_GCJ=no
-	  ;;
-	*)
-	  hardcode_direct_GCJ=yes
-	  export_dynamic_flag_spec_GCJ='${wl}-E'
-
-	  # hardcode_minus_L: Not really in the search PATH,
-	  # but as the default location of the library.
-	  hardcode_minus_L_GCJ=yes
-	  ;;
+	;;
+      dgux*)
+	case $cc_basename in
+	  ec++*)
+	    lt_prog_compiler_pic_CXX='-KPIC'
+	    ;;
+	  ghcx*)
+	    # Green Hills C++ Compiler
+	    lt_prog_compiler_pic_CXX='-pic'
+	    ;;
+	  *)
+	    ;;
 	esac
-      fi
-      ;;
-
-    irix5* | irix6* | nonstopux*)
-      if test "$GCC" = yes; then
-	archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-      else
-	archive_cmds_GCJ='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-	hardcode_libdir_flag_spec_ld_GCJ='-rpath $libdir'
-      fi
-      hardcode_libdir_flag_spec_GCJ='${wl}-rpath ${wl}$libdir'
-      hardcode_libdir_separator_GCJ=:
-      link_all_deplibs_GCJ=yes
-      ;;
-
-    netbsd*)
-      if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-	archive_cmds_GCJ='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'  # a.out
-      else
-	archive_cmds_GCJ='$LD -shared -o $lib $libobjs $deplibs $linker_flags'      # ELF
-      fi
-      hardcode_libdir_flag_spec_GCJ='-R$libdir'
-      hardcode_direct_GCJ=yes
-      hardcode_shlibpath_var_GCJ=no
-      ;;
-
-    newsos6)
-      archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-      hardcode_direct_GCJ=yes
-      hardcode_libdir_flag_spec_GCJ='${wl}-rpath ${wl}$libdir'
-      hardcode_libdir_separator_GCJ=:
-      hardcode_shlibpath_var_GCJ=no
-      ;;
-
-    openbsd*)
-      if test -f /usr/libexec/ld.so; then
-	hardcode_direct_GCJ=yes
-	hardcode_shlibpath_var_GCJ=no
-	if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-	  archive_cmds_GCJ='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
-	  archive_expsym_cmds_GCJ='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
-	  hardcode_libdir_flag_spec_GCJ='${wl}-rpath,$libdir'
-	  export_dynamic_flag_spec_GCJ='${wl}-E'
-	else
-	  case $host_os in
-	   openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*)
-	     archive_cmds_GCJ='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-	     hardcode_libdir_flag_spec_GCJ='-R$libdir'
-	     ;;
-	   *)
-	     archive_cmds_GCJ='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
-	     hardcode_libdir_flag_spec_GCJ='${wl}-rpath,$libdir'
-	     ;;
-	  esac
-        fi
-      else
-	ld_shlibs_GCJ=no
-      fi
-      ;;
-
-    os2*)
-      hardcode_libdir_flag_spec_GCJ='-L$libdir'
-      hardcode_minus_L_GCJ=yes
-      allow_undefined_flag_GCJ=unsupported
-      archive_cmds_GCJ='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
-      old_archive_From_new_cmds_GCJ='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
-      ;;
-
-    osf3*)
-      if test "$GCC" = yes; then
-	allow_undefined_flag_GCJ=' ${wl}-expect_unresolved ${wl}\*'
-	archive_cmds_GCJ='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-      else
-	allow_undefined_flag_GCJ=' -expect_unresolved \*'
-	archive_cmds_GCJ='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-      fi
-      hardcode_libdir_flag_spec_GCJ='${wl}-rpath ${wl}$libdir'
-      hardcode_libdir_separator_GCJ=:
-      ;;
-
-    osf4* | osf5*)	# as osf3* with the addition of -msym flag
-      if test "$GCC" = yes; then
-	allow_undefined_flag_GCJ=' ${wl}-expect_unresolved ${wl}\*'
-	archive_cmds_GCJ='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-	hardcode_libdir_flag_spec_GCJ='${wl}-rpath ${wl}$libdir'
-      else
-	allow_undefined_flag_GCJ=' -expect_unresolved \*'
-	archive_cmds_GCJ='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-	archive_expsym_cmds_GCJ='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~
-	$LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~$rm $lib.exp'
-
-	# Both c and cxx compiler support -rpath directly
-	hardcode_libdir_flag_spec_GCJ='-rpath $libdir'
-      fi
-      hardcode_libdir_separator_GCJ=:
-      ;;
-
-    solaris*)
-      no_undefined_flag_GCJ=' -z text'
-      if test "$GCC" = yes; then
-	wlarc='${wl}'
-	archive_cmds_GCJ='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-	archive_expsym_cmds_GCJ='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-	  $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp'
-      else
-	wlarc=''
-	archive_cmds_GCJ='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
-	archive_expsym_cmds_GCJ='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-  	$LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
-      fi
-      hardcode_libdir_flag_spec_GCJ='-R$libdir'
-      hardcode_shlibpath_var_GCJ=no
-      case $host_os in
-      solaris2.[0-5] | solaris2.[0-5].*) ;;
-      *)
-	# The compiler driver will combine and reorder linker options,
-	# but understands `-z linker_flag'.  GCC discards it without `$wl',
-	# but is careful enough not to reorder.
- 	# Supported since Solaris 2.6 (maybe 2.5.1?)
-	if test "$GCC" = yes; then
-	  whole_archive_flag_spec_GCJ='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
-	else
-	  whole_archive_flag_spec_GCJ='-z allextract$convenience -z defaultextract'
-	fi
 	;;
-      esac
-      link_all_deplibs_GCJ=yes
-      ;;
-
-    sunos4*)
-      if test "x$host_vendor" = xsequent; then
-	# Use $CC to link under sequent, because it throws in some extra .o
-	# files that make .init and .fini sections work.
-	archive_cmds_GCJ='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
-      else
-	archive_cmds_GCJ='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
-      fi
-      hardcode_libdir_flag_spec_GCJ='-L$libdir'
-      hardcode_direct_GCJ=yes
-      hardcode_minus_L_GCJ=yes
-      hardcode_shlibpath_var_GCJ=no
-      ;;
-
-    sysv4)
-      case $host_vendor in
-	sni)
-	  archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-	  hardcode_direct_GCJ=yes # is this really true???
+      freebsd* | dragonfly*)
+	# FreeBSD uses GNU C++
 	;;
-	siemens)
-	  ## LD is ld it makes a PLAMLIB
-	  ## CC just makes a GrossModule.
-	  archive_cmds_GCJ='$LD -G -o $lib $libobjs $deplibs $linker_flags'
-	  reload_cmds_GCJ='$CC -r -o $output$reload_objs'
-	  hardcode_direct_GCJ=no
+      hpux9* | hpux10* | hpux11*)
+	case $cc_basename in
+	  CC*)
+	    lt_prog_compiler_wl_CXX='-Wl,'
+	    lt_prog_compiler_static_CXX='${wl}-a ${wl}archive'
+	    if test "$host_cpu" != ia64; then
+	      lt_prog_compiler_pic_CXX='+Z'
+	    fi
+	    ;;
+	  aCC*)
+	    lt_prog_compiler_wl_CXX='-Wl,'
+	    lt_prog_compiler_static_CXX='${wl}-a ${wl}archive'
+	    case $host_cpu in
+	    hppa*64*|ia64*)
+	      # +Z the default
+	      ;;
+	    *)
+	      lt_prog_compiler_pic_CXX='+Z'
+	      ;;
+	    esac
+	    ;;
+	  *)
+	    ;;
+	esac
+	;;
+      interix*)
+	# This is c89, which is MS Visual C++ (no shared libs)
+	# Anyone wants to do a port?
+	;;
+      irix5* | irix6* | nonstopux*)
+	case $cc_basename in
+	  CC*)
+	    lt_prog_compiler_wl_CXX='-Wl,'
+	    lt_prog_compiler_static_CXX='-non_shared'
+	    # CC pic flag -KPIC is the default.
+	    ;;
+	  *)
+	    ;;
+	esac
+	;;
+      linux* | k*bsd*-gnu)
+	case $cc_basename in
+	  KCC*)
+	    # KAI C++ Compiler
+	    lt_prog_compiler_wl_CXX='--backend -Wl,'
+	    lt_prog_compiler_pic_CXX='-fPIC'
+	    ;;
+	  ecpc* )
+	    # old Intel C++ for x86_64 which still supported -KPIC.
+	    lt_prog_compiler_wl_CXX='-Wl,'
+	    lt_prog_compiler_pic_CXX='-KPIC'
+	    lt_prog_compiler_static_CXX='-static'
+	    ;;
+	  icpc* )
+	    # Intel C++, used to be incompatible with GCC.
+	    # ICC 10 doesn't accept -KPIC any more.
+	    lt_prog_compiler_wl_CXX='-Wl,'
+	    lt_prog_compiler_pic_CXX='-fPIC'
+	    lt_prog_compiler_static_CXX='-static'
+	    ;;
+	  pgCC* | pgcpp*)
+	    # Portland Group C++ compiler
+	    lt_prog_compiler_wl_CXX='-Wl,'
+	    lt_prog_compiler_pic_CXX='-fpic'
+	    lt_prog_compiler_static_CXX='-Bstatic'
+	    ;;
+	  cxx*)
+	    # Compaq C++
+	    # Make sure the PIC flag is empty.  It appears that all Alpha
+	    # Linux and Compaq Tru64 Unix objects are PIC.
+	    lt_prog_compiler_pic_CXX=
+	    lt_prog_compiler_static_CXX='-non_shared'
+	    ;;
+	  xlc* | xlC*)
+	    # IBM XL 8.0 on PPC
+	    lt_prog_compiler_wl_CXX='-Wl,'
+	    lt_prog_compiler_pic_CXX='-qpic'
+	    lt_prog_compiler_static_CXX='-qstaticlink'
+	    ;;
+	  *)
+	    case `$CC -V 2>&1 | sed 5q` in
+	    *Sun\ C*)
+	      # Sun C++ 5.9
+	      lt_prog_compiler_pic_CXX='-KPIC'
+	      lt_prog_compiler_static_CXX='-Bstatic'
+	      lt_prog_compiler_wl_CXX='-Qoption ld '
+	      ;;
+	    esac
+	    ;;
+	esac
+	;;
+      lynxos*)
+	;;
+      m88k*)
+	;;
+      mvs*)
+	case $cc_basename in
+	  cxx*)
+	    lt_prog_compiler_pic_CXX='-W c,exportall'
+	    ;;
+	  *)
+	    ;;
+	esac
+	;;
+      netbsd* | netbsdelf*-gnu)
+	;;
+      *qnx* | *nto*)
+        # QNX uses GNU C++, but need to define -shared option too, otherwise
+        # it will coredump.
+        lt_prog_compiler_pic_CXX='-fPIC -shared'
         ;;
-	motorola)
-	  archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-	  hardcode_direct_GCJ=no #Motorola manual says yes, but my tests say they lie
+      osf3* | osf4* | osf5*)
+	case $cc_basename in
+	  KCC*)
+	    lt_prog_compiler_wl_CXX='--backend -Wl,'
+	    ;;
+	  RCC*)
+	    # Rational C++ 2.4.1
+	    lt_prog_compiler_pic_CXX='-pic'
+	    ;;
+	  cxx*)
+	    # Digital/Compaq C++
+	    lt_prog_compiler_wl_CXX='-Wl,'
+	    # Make sure the PIC flag is empty.  It appears that all Alpha
+	    # Linux and Compaq Tru64 Unix objects are PIC.
+	    lt_prog_compiler_pic_CXX=
+	    lt_prog_compiler_static_CXX='-non_shared'
+	    ;;
+	  *)
+	    ;;
+	esac
 	;;
-      esac
-      runpath_var='LD_RUN_PATH'
-      hardcode_shlibpath_var_GCJ=no
-      ;;
-
-    sysv4.3*)
-      archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-      hardcode_shlibpath_var_GCJ=no
-      export_dynamic_flag_spec_GCJ='-Bexport'
-      ;;
-
-    sysv4*MP*)
-      if test -d /usr/nec; then
-	archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-	hardcode_shlibpath_var_GCJ=no
-	runpath_var=LD_RUN_PATH
-	hardcode_runpath_var=yes
-	ld_shlibs_GCJ=yes
-      fi
-      ;;
-
-    sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*)
-      no_undefined_flag_GCJ='${wl}-z,text'
-      archive_cmds_need_lc_GCJ=no
-      hardcode_shlibpath_var_GCJ=no
-      runpath_var='LD_RUN_PATH'
-
-      if test "$GCC" = yes; then
-	archive_cmds_GCJ='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-	archive_expsym_cmds_GCJ='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-      else
-	archive_cmds_GCJ='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-	archive_expsym_cmds_GCJ='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-      fi
-      ;;
-
-    sysv5* | sco3.2v5* | sco5v6*)
-      # Note: We can NOT use -z defs as we might desire, because we do not
-      # link with -lc, and that would cause any symbols used from libc to
-      # always be unresolved, which means just about no library would
-      # ever link correctly.  If we're not using GNU ld we use -z text
-      # though, which does catch some bad symbols but isn't as heavy-handed
-      # as -z defs.
-      no_undefined_flag_GCJ='${wl}-z,text'
-      allow_undefined_flag_GCJ='${wl}-z,nodefs'
-      archive_cmds_need_lc_GCJ=no
-      hardcode_shlibpath_var_GCJ=no
-      hardcode_libdir_flag_spec_GCJ='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`'
-      hardcode_libdir_separator_GCJ=':'
-      link_all_deplibs_GCJ=yes
-      export_dynamic_flag_spec_GCJ='${wl}-Bexport'
-      runpath_var='LD_RUN_PATH'
-
-      if test "$GCC" = yes; then
-	archive_cmds_GCJ='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
-	archive_expsym_cmds_GCJ='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
-      else
-	archive_cmds_GCJ='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
-	archive_expsym_cmds_GCJ='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
-      fi
-      ;;
-
-    uts4*)
-      archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-      hardcode_libdir_flag_spec_GCJ='-L$libdir'
-      hardcode_shlibpath_var_GCJ=no
-      ;;
-
-    *)
-      ld_shlibs_GCJ=no
-      ;;
-    esac
-  fi
-
-{ $as_echo "$as_me:$LINENO: result: $ld_shlibs_GCJ" >&5
-$as_echo "$ld_shlibs_GCJ" >&6; }
-test "$ld_shlibs_GCJ" = no && can_build_shared=no
-
-#
-# Do we need to explicitly link libc?
-#
-case "x$archive_cmds_need_lc_GCJ" in
-x|xyes)
-  # Assume -lc should be added
-  archive_cmds_need_lc_GCJ=yes
-
-  if test "$enable_shared" = yes && test "$GCC" = yes; then
-    case $archive_cmds_GCJ in
-    *'~'*)
-      # FIXME: we may have to deal with multi-command sequences.
-      ;;
-    '$CC '*)
-      # Test whether the compiler implicitly links with -lc since on some
-      # systems, -lgcc has to come before -lc. If gcc already passes -lc
-      # to ld, don't add -lc before -lgcc.
-      { $as_echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5
-$as_echo_n "checking whether -lc should be explicitly linked in... " >&6; }
-      $rm conftest*
-      echo "$lt_simple_compile_test_code" > conftest.$ac_ext
-
-      if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } 2>conftest.err; then
-        soname=conftest
-        lib=conftest
-        libobjs=conftest.$ac_objext
-        deplibs=
-        wl=$lt_prog_compiler_wl_GCJ
-	pic_flag=$lt_prog_compiler_pic_GCJ
-        compiler_flags=-v
-        linker_flags=-v
-        verstring=
-        output_objdir=.
-        libname=conftest
-        lt_save_allow_undefined_flag=$allow_undefined_flag_GCJ
-        allow_undefined_flag_GCJ=
-        if { (eval echo "$as_me:$LINENO: \"$archive_cmds_GCJ 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1\"") >&5
-  (eval $archive_cmds_GCJ 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) 2>&5
-  ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }
-        then
-	  archive_cmds_need_lc_GCJ=no
-        else
-	  archive_cmds_need_lc_GCJ=yes
-        fi
-        allow_undefined_flag_GCJ=$lt_save_allow_undefined_flag
-      else
-        cat conftest.err 1>&5
-      fi
-      $rm conftest*
-      { $as_echo "$as_me:$LINENO: result: $archive_cmds_need_lc_GCJ" >&5
-$as_echo "$archive_cmds_need_lc_GCJ" >&6; }
-      ;;
-    esac
-  fi
-  ;;
-esac
-
-{ $as_echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5
-$as_echo_n "checking dynamic linker characteristics... " >&6; }
-library_names_spec=
-libname_spec='lib$name'
-soname_spec=
-shrext_cmds=".so"
-postinstall_cmds=
-postuninstall_cmds=
-finish_cmds=
-finish_eval=
-shlibpath_var=
-shlibpath_overrides_runpath=unknown
-version_type=none
-dynamic_linker="$host_os ld.so"
-sys_lib_dlsearch_path_spec="/lib /usr/lib"
-
-need_lib_prefix=unknown
-hardcode_into_libs=no
-
-# when you set need_version to no, make sure it does not cause -set_version
-# flags to be left without arguments
-need_version=unknown
-
-case $host_os in
-aix3*)
-  version_type=linux
-  library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
-  shlibpath_var=LIBPATH
-
-  # AIX 3 has no versioning support, so we append a major version to the name.
-  soname_spec='${libname}${release}${shared_ext}$major'
-  ;;
-
-aix[4-9]*)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  hardcode_into_libs=yes
-  if test "$host_cpu" = ia64; then
-    # AIX 5 supports IA64
-    library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
-    shlibpath_var=LD_LIBRARY_PATH
-  else
-    # With GCC up to 2.95.x, collect2 would create an import file
-    # for dependence libraries.  The import file would start with
-    # the line `#! .'.  This would cause the generated library to
-    # depend on `.', always an invalid library.  This was fixed in
-    # development snapshots of GCC prior to 3.0.
-    case $host_os in
-      aix4 | aix4.[01] | aix4.[01].*)
-      if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
-	   echo ' yes '
-	   echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then
-	:
-      else
-	can_build_shared=no
-      fi
-      ;;
-    esac
-    # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
-    # soname into executable. Probably we can add versioning support to
-    # collect2, so additional links can be useful in future.
-    if test "$aix_use_runtimelinking" = yes; then
-      # If using run time linking (on AIX 4.2 or later) use lib<name>.so
-      # instead of lib<name>.a to let people know that these are not
-      # typical AIX shared libraries.
-      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-    else
-      # We preserve .a as extension for shared libraries through AIX4.2
-      # and later when we are not doing run time linking.
-      library_names_spec='${libname}${release}.a $libname.a'
-      soname_spec='${libname}${release}${shared_ext}$major'
-    fi
-    shlibpath_var=LIBPATH
-  fi
-  ;;
-
-amigaos*)
-  library_names_spec='$libname.ixlibrary $libname.a'
-  # Create ${libname}_ixlibrary.a entries in /sys/libs.
-  finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
-  ;;
-
-beos*)
-  library_names_spec='${libname}${shared_ext}'
-  dynamic_linker="$host_os ld.so"
-  shlibpath_var=LIBRARY_PATH
-  ;;
-
-bsdi[45]*)
-  version_type=linux
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
-  shlibpath_var=LD_LIBRARY_PATH
-  sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
-  sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
-  # the default ld.so.conf also contains /usr/contrib/lib and
-  # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
-  # libtool to hard-code these into programs
-  ;;
-
-cygwin* | mingw* | pw32*)
-  version_type=windows
-  shrext_cmds=".dll"
-  need_version=no
-  need_lib_prefix=no
-
-  case $GCC,$host_os in
-  yes,cygwin* | yes,mingw* | yes,pw32*)
-    library_names_spec='$libname.dll.a'
-    # DLL is installed to $(libdir)/../bin by postinstall_cmds
-    postinstall_cmds='base_file=`basename \${file}`~
-      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~
-      dldir=$destdir/`dirname \$dlpath`~
-      test -d \$dldir || mkdir -p \$dldir~
-      $install_prog $dir/$dlname \$dldir/$dlname~
-      chmod a+x \$dldir/$dlname'
-    postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
-      dlpath=$dir/\$dldll~
-       $rm \$dlpath'
-    shlibpath_overrides_runpath=yes
-
-    case $host_os in
-    cygwin*)
-      # Cygwin DLLs use 'cyg' prefix rather than 'lib'
-      soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
-      sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib"
-      ;;
-    mingw*)
-      # MinGW DLLs use traditional 'lib' prefix
-      soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
-      sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
-      if echo "$sys_lib_search_path_spec" | grep ';[c-zC-Z]:/' >/dev/null; then
-        # It is most probably a Windows format PATH printed by
-        # mingw gcc, but we are running on Cygwin. Gcc prints its search
-        # path with ; separators, and with drive letters. We can handle the
-        # drive letters (cygwin fileutils understands them), so leave them,
-        # especially as we might pass files found there to a mingw objdump,
-        # which wouldn't understand a cygwinified path. Ahh.
-        sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
-      else
-        sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED  -e "s/$PATH_SEPARATOR/ /g"`
-      fi
-      ;;
-    pw32*)
-      # pw32 DLLs use 'pw' prefix rather than 'lib'
-      library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
-      ;;
-    esac
-    ;;
-
-  *)
-    library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib'
-    ;;
-  esac
-  dynamic_linker='Win32 ld.exe'
-  # FIXME: first we should search . and the directory the executable is in
-  shlibpath_var=PATH
-  ;;
-
-darwin* | rhapsody*)
-  dynamic_linker="$host_os dyld"
-  version_type=darwin
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext'
-  soname_spec='${libname}${release}${major}$shared_ext'
-  shlibpath_overrides_runpath=yes
-  shlibpath_var=DYLD_LIBRARY_PATH
-  shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
-
-  sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
-  ;;
-
-dgux*)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  ;;
-
-freebsd1*)
-  dynamic_linker=no
-  ;;
-
-freebsd* | dragonfly*)
-  # DragonFly does not have aout.  When/if they implement a new
-  # versioning mechanism, adjust this.
-  if test -x /usr/bin/objformat; then
-    objformat=`/usr/bin/objformat`
-  else
-    case $host_os in
-    freebsd[123]*) objformat=aout ;;
-    *) objformat=elf ;;
-    esac
-  fi
-  version_type=freebsd-$objformat
-  case $version_type in
-    freebsd-elf*)
-      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
-      need_version=no
-      need_lib_prefix=no
-      ;;
-    freebsd-*)
-      library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
-      need_version=yes
-      ;;
-  esac
-  shlibpath_var=LD_LIBRARY_PATH
-  case $host_os in
-  freebsd2*)
-    shlibpath_overrides_runpath=yes
-    ;;
-  freebsd3.[01]* | freebsdelf3.[01]*)
-    shlibpath_overrides_runpath=yes
-    hardcode_into_libs=yes
-    ;;
-  freebsd3.[2-9]* | freebsdelf3.[2-9]* | \
-  freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1)
-    shlibpath_overrides_runpath=no
-    hardcode_into_libs=yes
-    ;;
-  *) # from 4.6 on, and DragonFly
-    shlibpath_overrides_runpath=yes
-    hardcode_into_libs=yes
-    ;;
-  esac
-  ;;
-
-gnu*)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  hardcode_into_libs=yes
-  ;;
-
-hpux9* | hpux10* | hpux11*)
-  # Give a soname corresponding to the major version so that dld.sl refuses to
-  # link against other versions.
-  version_type=sunos
-  need_lib_prefix=no
-  need_version=no
-  case $host_cpu in
-  ia64*)
-    shrext_cmds='.so'
-    hardcode_into_libs=yes
-    dynamic_linker="$host_os dld.so"
-    shlibpath_var=LD_LIBRARY_PATH
-    shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
-    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-    soname_spec='${libname}${release}${shared_ext}$major'
-    if test "X$HPUX_IA64_MODE" = X32; then
-      sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
-    else
-      sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
-    fi
-    sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
-    ;;
-   hppa*64*)
-     shrext_cmds='.sl'
-     hardcode_into_libs=yes
-     dynamic_linker="$host_os dld.sl"
-     shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
-     shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
-     library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-     soname_spec='${libname}${release}${shared_ext}$major'
-     sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
-     sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
-     ;;
-   *)
-    shrext_cmds='.sl'
-    dynamic_linker="$host_os dld.sl"
-    shlibpath_var=SHLIB_PATH
-    shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
-    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-    soname_spec='${libname}${release}${shared_ext}$major'
-    ;;
-  esac
-  # HP-UX runs *really* slowly unless shared libraries are mode 555.
-  postinstall_cmds='chmod 555 $lib'
-  ;;
-
-interix[3-9]*)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=no
-  hardcode_into_libs=yes
-  ;;
-
-irix5* | irix6* | nonstopux*)
-  case $host_os in
-    nonstopux*) version_type=nonstopux ;;
-    *)
-	if test "$lt_cv_prog_gnu_ld" = yes; then
-		version_type=linux
-	else
-		version_type=irix
-	fi ;;
-  esac
-  need_lib_prefix=no
-  need_version=no
-  soname_spec='${libname}${release}${shared_ext}$major'
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
-  case $host_os in
-  irix5* | nonstopux*)
-    libsuff= shlibsuff=
-    ;;
-  *)
-    case $LD in # libtool.m4 will add one of these switches to LD
-    *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
-      libsuff= shlibsuff= libmagic=32-bit;;
-    *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
-      libsuff=32 shlibsuff=N32 libmagic=N32;;
-    *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
-      libsuff=64 shlibsuff=64 libmagic=64-bit;;
-    *) libsuff= shlibsuff= libmagic=never-match;;
-    esac
-    ;;
-  esac
-  shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
-  shlibpath_overrides_runpath=no
-  sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
-  sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
-  hardcode_into_libs=yes
-  ;;
-
-# No shared lib support for Linux oldld, aout, or coff.
-linux*oldld* | linux*aout* | linux*coff*)
-  dynamic_linker=no
-  ;;
-
-# This must be Linux ELF.
-linux* | k*bsd*-gnu)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=no
-  # This implies no fast_install, which is unacceptable.
-  # Some rework will be needed to allow for fast_install
-  # before this can be enabled.
-  hardcode_into_libs=yes
-
-  # find out which ABI we are using
-  libsuff=
-  case "$host_cpu" in
-  x86_64*|s390x*|powerpc64*)
-    echo '#line 19483 "configure"' > conftest.$ac_ext
-    if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; then
-      case `/usr/bin/file conftest.$ac_objext` in
-      *64-bit*)
-        libsuff=64
-        ;;
-      esac
-    fi
-    rm -rf conftest*
-    ;;
-  esac
-
-  sys_lib_dlsearch_path_spec="/lib${libsuff} /usr/lib${libsuff}"
-
-  # Append ld.so.conf contents to the search path
-  if test -f /etc/ld.so.conf; then
-    lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ 	]*hwcap[ 	]/d;s/[:,	]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
-    sys_lib_dlsearch_path_spec="$sys_lib_dlsearch_path_spec $lt_ld_extra"
-  fi
-
-  # We used to test for /lib/ld.so.1 and disable shared libraries on
-  # powerpc, because MkLinux only supported shared libraries with the
-  # GNU dynamic linker.  Since this was broken with cross compilers,
-  # most powerpc-linux boxes support dynamic linking these days and
-  # people can always --disable-shared, the test was removed, and we
-  # assume the GNU/Linux dynamic linker is in use.
-  dynamic_linker='GNU/Linux ld.so'
-  ;;
-
-netbsd*)
-  version_type=sunos
-  need_lib_prefix=no
-  need_version=no
-  if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
-    finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
-    dynamic_linker='NetBSD (a.out) ld.so'
-  else
-    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
-    soname_spec='${libname}${release}${shared_ext}$major'
-    dynamic_linker='NetBSD ld.elf_so'
-  fi
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
-  hardcode_into_libs=yes
-  ;;
-
-newsos6)
-  version_type=linux
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
-  ;;
-
-nto-qnx*)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
-  ;;
-
-openbsd*)
-  version_type=sunos
-  sys_lib_dlsearch_path_spec="/usr/lib"
-  need_lib_prefix=no
-  # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
-  case $host_os in
-    openbsd3.3 | openbsd3.3.*) need_version=yes ;;
-    *)                         need_version=no  ;;
-  esac
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
-  finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
-  shlibpath_var=LD_LIBRARY_PATH
-  if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-    case $host_os in
-      openbsd2.[89] | openbsd2.[89].*)
-	shlibpath_overrides_runpath=no
+      psos*)
 	;;
-      *)
-	shlibpath_overrides_runpath=yes
+      solaris*)
+	case $cc_basename in
+	  CC*)
+	    # Sun C++ 4.2, 5.x and Centerline C++
+	    lt_prog_compiler_pic_CXX='-KPIC'
+	    lt_prog_compiler_static_CXX='-Bstatic'
+	    lt_prog_compiler_wl_CXX='-Qoption ld '
+	    ;;
+	  gcx*)
+	    # Green Hills C++ Compiler
+	    lt_prog_compiler_pic_CXX='-PIC'
+	    ;;
+	  *)
+	    ;;
+	esac
 	;;
-      esac
-  else
-    shlibpath_overrides_runpath=yes
-  fi
-  ;;
-
-os2*)
-  libname_spec='$name'
-  shrext_cmds=".dll"
-  need_lib_prefix=no
-  library_names_spec='$libname${shared_ext} $libname.a'
-  dynamic_linker='OS/2 ld.exe'
-  shlibpath_var=LIBPATH
-  ;;
-
-osf3* | osf4* | osf5*)
-  version_type=osf
-  need_lib_prefix=no
-  need_version=no
-  soname_spec='${libname}${release}${shared_ext}$major'
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  shlibpath_var=LD_LIBRARY_PATH
-  sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
-  sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
-  ;;
-
-rdos*)
-  dynamic_linker=no
-  ;;
-
-solaris*)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
-  hardcode_into_libs=yes
-  # ldd complains unless libraries are executable
-  postinstall_cmds='chmod +x $lib'
-  ;;
-
-sunos4*)
-  version_type=sunos
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
-  finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
-  if test "$with_gnu_ld" = yes; then
-    need_lib_prefix=no
-  fi
-  need_version=yes
-  ;;
-
-sysv4 | sysv4.3*)
-  version_type=linux
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  case $host_vendor in
-    sni)
-      shlibpath_overrides_runpath=no
-      need_lib_prefix=no
-      export_dynamic_flag_spec='${wl}-Blargedynsym'
-      runpath_var=LD_RUN_PATH
-      ;;
-    siemens)
-      need_lib_prefix=no
-      ;;
-    motorola)
-      need_lib_prefix=no
-      need_version=no
-      shlibpath_overrides_runpath=no
-      sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
-      ;;
-  esac
-  ;;
-
-sysv4*MP*)
-  if test -d /usr/nec ;then
-    version_type=linux
-    library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
-    soname_spec='$libname${shared_ext}.$major'
-    shlibpath_var=LD_LIBRARY_PATH
-  fi
-  ;;
-
-sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
-  version_type=freebsd-elf
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  hardcode_into_libs=yes
-  if test "$with_gnu_ld" = yes; then
-    sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
-    shlibpath_overrides_runpath=no
-  else
-    sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
-    shlibpath_overrides_runpath=yes
-    case $host_os in
-      sco3.2v5*)
-        sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
+      sunos4*)
+	case $cc_basename in
+	  CC*)
+	    # Sun C++ 4.x
+	    lt_prog_compiler_pic_CXX='-pic'
+	    lt_prog_compiler_static_CXX='-Bstatic'
+	    ;;
+	  lcc*)
+	    # Lucid
+	    lt_prog_compiler_pic_CXX='-pic'
+	    ;;
+	  *)
+	    ;;
+	esac
+	;;
+      sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
+	case $cc_basename in
+	  CC*)
+	    lt_prog_compiler_wl_CXX='-Wl,'
+	    lt_prog_compiler_pic_CXX='-KPIC'
+	    lt_prog_compiler_static_CXX='-Bstatic'
+	    ;;
+	esac
+	;;
+      tandem*)
+	case $cc_basename in
+	  NCC*)
+	    # NonStop-UX NCC 3.20
+	    lt_prog_compiler_pic_CXX='-KPIC'
+	    ;;
+	  *)
+	    ;;
+	esac
+	;;
+      vxworks*)
+	;;
+      *)
+	lt_prog_compiler_can_build_shared_CXX=no
 	;;
     esac
   fi
-  sys_lib_dlsearch_path_spec='/usr/lib'
-  ;;
-
-uts4*)
-  version_type=linux
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  ;;
 
-*)
-  dynamic_linker=no
-  ;;
+case $host_os in
+  # For platforms which do not support PIC, -DPIC is meaningless:
+  *djgpp*)
+    lt_prog_compiler_pic_CXX=
+    ;;
+  *)
+    lt_prog_compiler_pic_CXX="$lt_prog_compiler_pic_CXX -DPIC"
+    ;;
 esac
-{ $as_echo "$as_me:$LINENO: result: $dynamic_linker" >&5
-$as_echo "$dynamic_linker" >&6; }
-test "$dynamic_linker" = no && can_build_shared=no
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_prog_compiler_pic_CXX" >&5
+$as_echo "$lt_prog_compiler_pic_CXX" >&6; }
 
-if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
-  lt_cv_sys_lib_search_path_spec="$sys_lib_search_path_spec"
-fi
 
-sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec"
-if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then
+
+#
+# Check to make sure the PIC flag actually works.
+#
+if test -n "$lt_prog_compiler_pic_CXX"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler PIC flag $lt_prog_compiler_pic_CXX works" >&5
+$as_echo_n "checking if $compiler PIC flag $lt_prog_compiler_pic_CXX works... " >&6; }
+if test "${lt_cv_prog_compiler_pic_works_CXX+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
-  lt_cv_sys_lib_dlsearch_path_spec="$sys_lib_dlsearch_path_spec"
-fi
-
-sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec"
+  lt_cv_prog_compiler_pic_works_CXX=no
+   ac_outfile=conftest.$ac_objext
+   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+   lt_compiler_flag="$lt_prog_compiler_pic_CXX -DPIC"
+   # Insert the option either (1) after the last *FLAGS variable, or
+   # (2) before a word containing "conftest.", or (3) at the end.
+   # Note that $ac_compile itself does not contain backslashes and begins
+   # with a dollar sign (not a hyphen), so the echo should work correctly.
+   # The option is referenced via a variable to avoid confusing sed.
+   lt_compile=`echo "$ac_compile" | $SED \
+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+   -e 's:$: $lt_compiler_flag:'`
+   (eval echo "\"\$as_me:13830: $lt_compile\"" >&5)
+   (eval "$lt_compile" 2>conftest.err)
+   ac_status=$?
+   cat conftest.err >&5
+   echo "$as_me:13834: \$? = $ac_status" >&5
+   if (exit $ac_status) && test -s "$ac_outfile"; then
+     # The compiler can only warn and ignore the option if not recognized
+     # So say no if there are warnings other than the usual output.
+     $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
+     $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+     if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
+       lt_cv_prog_compiler_pic_works_CXX=yes
+     fi
+   fi
+   $RM conftest*
 
-variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
-if test "$GCC" = yes; then
-  variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
 fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic_works_CXX" >&5
+$as_echo "$lt_cv_prog_compiler_pic_works_CXX" >&6; }
 
-{ $as_echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5
-$as_echo_n "checking how to hardcode library paths into programs... " >&6; }
-hardcode_action_GCJ=
-if test -n "$hardcode_libdir_flag_spec_GCJ" || \
-   test -n "$runpath_var_GCJ" || \
-   test "X$hardcode_automatic_GCJ" = "Xyes" ; then
-
-  # We can hardcode non-existant directories.
-  if test "$hardcode_direct_GCJ" != no &&
-     # If the only mechanism to avoid hardcoding is shlibpath_var, we
-     # have to relink, otherwise we might link with an installed library
-     # when we should be linking with a yet-to-be-installed one
-     ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, GCJ)" != no &&
-     test "$hardcode_minus_L_GCJ" != no; then
-    # Linking always hardcodes the temporary library directory.
-    hardcode_action_GCJ=relink
-  else
-    # We can link without hardcoding, and we can hardcode nonexisting dirs.
-    hardcode_action_GCJ=immediate
-  fi
+if test x"$lt_cv_prog_compiler_pic_works_CXX" = xyes; then
+    case $lt_prog_compiler_pic_CXX in
+     "" | " "*) ;;
+     *) lt_prog_compiler_pic_CXX=" $lt_prog_compiler_pic_CXX" ;;
+     esac
 else
-  # We cannot hardcode anything, or else we can only hardcode existing
-  # directories.
-  hardcode_action_GCJ=unsupported
+    lt_prog_compiler_pic_CXX=
+     lt_prog_compiler_can_build_shared_CXX=no
 fi
-{ $as_echo "$as_me:$LINENO: result: $hardcode_action_GCJ" >&5
-$as_echo "$hardcode_action_GCJ" >&6; }
 
-if test "$hardcode_action_GCJ" = relink; then
-  # Fast installation is not supported
-  enable_fast_install=no
-elif test "$shlibpath_overrides_runpath" = yes ||
-     test "$enable_shared" = no; then
-  # Fast installation is not necessary
-  enable_fast_install=needless
 fi
 
 
-# The else clause should only fire when bootstrapping the
-# libtool distribution, otherwise you forgot to ship ltmain.sh
-# with your package, and you will get complaints that there are
-# no rules to generate ltmain.sh.
-if test -f "$ltmain"; then
-  # See if we are running on zsh, and set the options which allow our commands through
-  # without removal of \ escapes.
-  if test -n "${ZSH_VERSION+set}" ; then
-    setopt NO_GLOB_SUBST
-  fi
-  # Now quote all the things that may contain metacharacters while being
-  # careful not to overquote the AC_SUBSTed values.  We take copies of the
-  # variables and quote the copies for generation of the libtool script.
-  for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \
-    SED SHELL STRIP \
-    libname_spec library_names_spec soname_spec extract_expsyms_cmds \
-    old_striplib striplib file_magic_cmd finish_cmds finish_eval \
-    deplibs_check_method reload_flag reload_cmds need_locks \
-    lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \
-    lt_cv_sys_global_symbol_to_c_name_address \
-    sys_lib_search_path_spec sys_lib_dlsearch_path_spec \
-    old_postinstall_cmds old_postuninstall_cmds \
-    compiler_GCJ \
-    CC_GCJ \
-    LD_GCJ \
-    lt_prog_compiler_wl_GCJ \
-    lt_prog_compiler_pic_GCJ \
-    lt_prog_compiler_static_GCJ \
-    lt_prog_compiler_no_builtin_flag_GCJ \
-    export_dynamic_flag_spec_GCJ \
-    thread_safe_flag_spec_GCJ \
-    whole_archive_flag_spec_GCJ \
-    enable_shared_with_static_runtimes_GCJ \
-    old_archive_cmds_GCJ \
-    old_archive_from_new_cmds_GCJ \
-    predep_objects_GCJ \
-    postdep_objects_GCJ \
-    predeps_GCJ \
-    postdeps_GCJ \
-    compiler_lib_search_path_GCJ \
-    compiler_lib_search_dirs_GCJ \
-    archive_cmds_GCJ \
-    archive_expsym_cmds_GCJ \
-    postinstall_cmds_GCJ \
-    postuninstall_cmds_GCJ \
-    old_archive_from_expsyms_cmds_GCJ \
-    allow_undefined_flag_GCJ \
-    no_undefined_flag_GCJ \
-    export_symbols_cmds_GCJ \
-    hardcode_libdir_flag_spec_GCJ \
-    hardcode_libdir_flag_spec_ld_GCJ \
-    hardcode_libdir_separator_GCJ \
-    hardcode_automatic_GCJ \
-    module_cmds_GCJ \
-    module_expsym_cmds_GCJ \
-    lt_cv_prog_compiler_c_o_GCJ \
-    fix_srcfile_path_GCJ \
-    exclude_expsyms_GCJ \
-    include_expsyms_GCJ; do
-
-    case $var in
-    old_archive_cmds_GCJ | \
-    old_archive_from_new_cmds_GCJ | \
-    archive_cmds_GCJ | \
-    archive_expsym_cmds_GCJ | \
-    module_cmds_GCJ | \
-    module_expsym_cmds_GCJ | \
-    old_archive_from_expsyms_cmds_GCJ | \
-    export_symbols_cmds_GCJ | \
-    extract_expsyms_cmds | reload_cmds | finish_cmds | \
-    postinstall_cmds | postuninstall_cmds | \
-    old_postinstall_cmds | old_postuninstall_cmds | \
-    sys_lib_search_path_spec | sys_lib_dlsearch_path_spec)
-      # Double-quote double-evaled strings.
-      eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\""
-      ;;
-    *)
-      eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\""
-      ;;
-    esac
-  done
-
-  case $lt_echo in
-  *'\$0 --fallback-echo"')
-    lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'`
-    ;;
-  esac
-
-cfgfile="$ofile"
-
-  cat <<__EOF__ >> "$cfgfile"
-# ### BEGIN LIBTOOL TAG CONFIG: $tagname
-
-# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
-
-# Shell to use when invoking shell scripts.
-SHELL=$lt_SHELL
-
-# Whether or not to build shared libraries.
-build_libtool_libs=$enable_shared
-
-# Whether or not to build static libraries.
-build_old_libs=$enable_static
-
-# Whether or not to add -lc for building shared libraries.
-build_libtool_need_lc=$archive_cmds_need_lc_GCJ
-
-# Whether or not to disallow shared libs when runtime libs are static
-allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes_GCJ
 
-# Whether or not to optimize for fast installation.
-fast_install=$enable_fast_install
-
-# The host system.
-host_alias=$host_alias
-host=$host
-host_os=$host_os
+#
+# Check to make sure the static flag actually works.
+#
+wl=$lt_prog_compiler_wl_CXX eval lt_tmp_static_flag=\"$lt_prog_compiler_static_CXX\"
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler static flag $lt_tmp_static_flag works" >&5
+$as_echo_n "checking if $compiler static flag $lt_tmp_static_flag works... " >&6; }
+if test "${lt_cv_prog_compiler_static_works_CXX+set}" = set; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_prog_compiler_static_works_CXX=no
+   save_LDFLAGS="$LDFLAGS"
+   LDFLAGS="$LDFLAGS $lt_tmp_static_flag"
+   echo "$lt_simple_link_test_code" > conftest.$ac_ext
+   if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
+     # The linker can only warn and ignore the option if not recognized
+     # So say no if there are warnings
+     if test -s conftest.err; then
+       # Append any errors to the config.log.
+       cat conftest.err 1>&5
+       $ECHO "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp
+       $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+       if diff conftest.exp conftest.er2 >/dev/null; then
+         lt_cv_prog_compiler_static_works_CXX=yes
+       fi
+     else
+       lt_cv_prog_compiler_static_works_CXX=yes
+     fi
+   fi
+   $RM -r conftest*
+   LDFLAGS="$save_LDFLAGS"
 
-# The build system.
-build_alias=$build_alias
-build=$build
-build_os=$build_os
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_static_works_CXX" >&5
+$as_echo "$lt_cv_prog_compiler_static_works_CXX" >&6; }
 
-# An echo program that does not interpret backslashes.
-echo=$lt_echo
+if test x"$lt_cv_prog_compiler_static_works_CXX" = xyes; then
+    :
+else
+    lt_prog_compiler_static_CXX=
+fi
 
-# The archiver.
-AR=$lt_AR
-AR_FLAGS=$lt_AR_FLAGS
 
-# A C compiler.
-LTCC=$lt_LTCC
 
-# LTCC compiler flags.
-LTCFLAGS=$lt_LTCFLAGS
 
-# A language-specific compiler.
-CC=$lt_compiler_GCJ
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5
+$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; }
+if test "${lt_cv_prog_compiler_c_o_CXX+set}" = set; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_prog_compiler_c_o_CXX=no
+   $RM -r conftest 2>/dev/null
+   mkdir conftest
+   cd conftest
+   mkdir out
+   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
 
-# Is the compiler the GNU C compiler?
-with_gcc=$GCC_GCJ
+   lt_compiler_flag="-o out/conftest2.$ac_objext"
+   # Insert the option either (1) after the last *FLAGS variable, or
+   # (2) before a word containing "conftest.", or (3) at the end.
+   # Note that $ac_compile itself does not contain backslashes and begins
+   # with a dollar sign (not a hyphen), so the echo should work correctly.
+   lt_compile=`echo "$ac_compile" | $SED \
+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+   -e 's:$: $lt_compiler_flag:'`
+   (eval echo "\"\$as_me:13929: $lt_compile\"" >&5)
+   (eval "$lt_compile" 2>out/conftest.err)
+   ac_status=$?
+   cat out/conftest.err >&5
+   echo "$as_me:13933: \$? = $ac_status" >&5
+   if (exit $ac_status) && test -s out/conftest2.$ac_objext
+   then
+     # The compiler can only warn and ignore the option if not recognized
+     # So say no if there are warnings
+     $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
+     $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
+     if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
+       lt_cv_prog_compiler_c_o_CXX=yes
+     fi
+   fi
+   chmod u+w . 2>&5
+   $RM conftest*
+   # SGI C++ compiler will create directory out/ii_files/ for
+   # template instantiation
+   test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files
+   $RM out/* && rmdir out
+   cd ..
+   $RM -r conftest
+   $RM conftest*
 
-# An ERE matcher.
-EGREP=$lt_EGREP
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o_CXX" >&5
+$as_echo "$lt_cv_prog_compiler_c_o_CXX" >&6; }
 
-# The linker used to build libraries.
-LD=$lt_LD_GCJ
 
-# Whether we need hard or soft links.
-LN_S=$lt_LN_S
 
-# A BSD-compatible nm program.
-NM=$lt_NM
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5
+$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; }
+if test "${lt_cv_prog_compiler_c_o_CXX+set}" = set; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_prog_compiler_c_o_CXX=no
+   $RM -r conftest 2>/dev/null
+   mkdir conftest
+   cd conftest
+   mkdir out
+   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
 
-# A symbol stripping program
-STRIP=$lt_STRIP
+   lt_compiler_flag="-o out/conftest2.$ac_objext"
+   # Insert the option either (1) after the last *FLAGS variable, or
+   # (2) before a word containing "conftest.", or (3) at the end.
+   # Note that $ac_compile itself does not contain backslashes and begins
+   # with a dollar sign (not a hyphen), so the echo should work correctly.
+   lt_compile=`echo "$ac_compile" | $SED \
+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+   -e 's:$: $lt_compiler_flag:'`
+   (eval echo "\"\$as_me:13981: $lt_compile\"" >&5)
+   (eval "$lt_compile" 2>out/conftest.err)
+   ac_status=$?
+   cat out/conftest.err >&5
+   echo "$as_me:13985: \$? = $ac_status" >&5
+   if (exit $ac_status) && test -s out/conftest2.$ac_objext
+   then
+     # The compiler can only warn and ignore the option if not recognized
+     # So say no if there are warnings
+     $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
+     $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
+     if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
+       lt_cv_prog_compiler_c_o_CXX=yes
+     fi
+   fi
+   chmod u+w . 2>&5
+   $RM conftest*
+   # SGI C++ compiler will create directory out/ii_files/ for
+   # template instantiation
+   test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files
+   $RM out/* && rmdir out
+   cd ..
+   $RM -r conftest
+   $RM conftest*
 
-# Used to examine libraries when file_magic_cmd begins "file"
-MAGIC_CMD=$MAGIC_CMD
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o_CXX" >&5
+$as_echo "$lt_cv_prog_compiler_c_o_CXX" >&6; }
 
-# Used on cygwin: DLL creation program.
-DLLTOOL="$DLLTOOL"
 
-# Used on cygwin: object dumper.
-OBJDUMP="$OBJDUMP"
 
-# Used on cygwin: assembler.
-AS="$AS"
 
-# The name of the directory that contains temporary libtool files.
-objdir=$objdir
+hard_links="nottested"
+if test "$lt_cv_prog_compiler_c_o_CXX" = no && test "$need_locks" != no; then
+  # do not overwrite the value of need_locks provided by the user
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if we can lock with hard links" >&5
+$as_echo_n "checking if we can lock with hard links... " >&6; }
+  hard_links=yes
+  $RM conftest*
+  ln conftest.a conftest.b 2>/dev/null && hard_links=no
+  touch conftest.a
+  ln conftest.a conftest.b 2>&5 || hard_links=no
+  ln conftest.a conftest.b 2>/dev/null && hard_links=no
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $hard_links" >&5
+$as_echo "$hard_links" >&6; }
+  if test "$hard_links" = no; then
+    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5
+$as_echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;}
+    need_locks=warn
+  fi
+else
+  need_locks=no
+fi
 
-# How to create reloadable object files.
-reload_flag=$lt_reload_flag
-reload_cmds=$lt_reload_cmds
 
-# How to pass a linker flag through the compiler.
-wl=$lt_lt_prog_compiler_wl_GCJ
 
-# Object file suffix (normally "o").
-objext="$ac_objext"
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $compiler linker ($LD) supports shared libraries" >&5
+$as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; }
 
-# Old archive suffix (normally "a").
-libext="$libext"
+  export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+  case $host_os in
+  aix[4-9]*)
+    # If we're using GNU nm, then we don't want the "-C" option.
+    # -C means demangle to AIX nm, but means don't demangle with GNU nm
+    if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
+      export_symbols_cmds_CXX='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+    else
+      export_symbols_cmds_CXX='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+    fi
+    ;;
+  pw32*)
+    export_symbols_cmds_CXX="$ltdll_cmds"
+  ;;
+  cygwin* | mingw* | cegcc*)
+    export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/;/^.*[ ]__nm__/s/^.*[ ]__nm__\([^ ]*\)[ ][^ ]*/\1 DATA/;/^I[ ]/d;/^[AITW][ ]/s/.* //'\'' | sort | uniq > $export_symbols'
+  ;;
+  linux* | k*bsd*-gnu)
+    link_all_deplibs_CXX=no
+  ;;
+  *)
+    export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+  ;;
+  esac
+  exclude_expsyms_CXX='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'
 
-# Shared library suffix (normally ".so").
-shrext_cmds='$shrext_cmds'
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ld_shlibs_CXX" >&5
+$as_echo "$ld_shlibs_CXX" >&6; }
+test "$ld_shlibs_CXX" = no && can_build_shared=no
 
-# Executable file suffix (normally "").
-exeext="$exeext"
+with_gnu_ld_CXX=$with_gnu_ld
 
-# Additional compiler flags for building library objects.
-pic_flag=$lt_lt_prog_compiler_pic_GCJ
-pic_mode=$pic_mode
 
-# What is the maximum length of a command?
-max_cmd_len=$lt_cv_sys_max_cmd_len
 
-# Does compiler simultaneously support -c and -o options?
-compiler_c_o=$lt_lt_cv_prog_compiler_c_o_GCJ
 
-# Must we lock files when doing compilation?
-need_locks=$lt_need_locks
 
-# Do we need the lib prefix for modules?
-need_lib_prefix=$need_lib_prefix
 
-# Do we need a version for libraries?
-need_version=$need_version
+#
+# Do we need to explicitly link libc?
+#
+case "x$archive_cmds_need_lc_CXX" in
+x|xyes)
+  # Assume -lc should be added
+  archive_cmds_need_lc_CXX=yes
 
-# Whether dlopen is supported.
-dlopen_support=$enable_dlopen
+  if test "$enable_shared" = yes && test "$GCC" = yes; then
+    case $archive_cmds_CXX in
+    *'~'*)
+      # FIXME: we may have to deal with multi-command sequences.
+      ;;
+    '$CC '*)
+      # Test whether the compiler implicitly links with -lc since on some
+      # systems, -lgcc has to come before -lc. If gcc already passes -lc
+      # to ld, don't add -lc before -lgcc.
+      { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether -lc should be explicitly linked in" >&5
+$as_echo_n "checking whether -lc should be explicitly linked in... " >&6; }
+      $RM conftest*
+      echo "$lt_simple_compile_test_code" > conftest.$ac_ext
 
-# Whether dlopen of programs is supported.
-dlopen_self=$enable_dlopen_self
+      if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } 2>conftest.err; then
+        soname=conftest
+        lib=conftest
+        libobjs=conftest.$ac_objext
+        deplibs=
+        wl=$lt_prog_compiler_wl_CXX
+	pic_flag=$lt_prog_compiler_pic_CXX
+        compiler_flags=-v
+        linker_flags=-v
+        verstring=
+        output_objdir=.
+        libname=conftest
+        lt_save_allow_undefined_flag=$allow_undefined_flag_CXX
+        allow_undefined_flag_CXX=
+        if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$archive_cmds_CXX 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1\""; } >&5
+  (eval $archive_cmds_CXX 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }
+        then
+	  archive_cmds_need_lc_CXX=no
+        else
+	  archive_cmds_need_lc_CXX=yes
+        fi
+        allow_undefined_flag_CXX=$lt_save_allow_undefined_flag
+      else
+        cat conftest.err 1>&5
+      fi
+      $RM conftest*
+      { $as_echo "$as_me:${as_lineno-$LINENO}: result: $archive_cmds_need_lc_CXX" >&5
+$as_echo "$archive_cmds_need_lc_CXX" >&6; }
+      ;;
+    esac
+  fi
+  ;;
+esac
 
-# Whether dlopen of statically linked programs is supported.
-dlopen_self_static=$enable_dlopen_self_static
 
-# Compiler flag to prevent dynamic linking.
-link_static_flag=$lt_lt_prog_compiler_static_GCJ
 
-# Compiler flag to turn off builtin functions.
-no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_GCJ
 
-# Compiler flag to allow reflexive dlopens.
-export_dynamic_flag_spec=$lt_export_dynamic_flag_spec_GCJ
 
-# Compiler flag to generate shared objects directly from archives.
-whole_archive_flag_spec=$lt_whole_archive_flag_spec_GCJ
 
-# Compiler flag to generate thread-safe objects.
-thread_safe_flag_spec=$lt_thread_safe_flag_spec_GCJ
 
-# Library versioning type.
-version_type=$version_type
 
-# Format of library name prefix.
-libname_spec=$lt_libname_spec
 
-# List of archive names.  First name is the real one, the rest are links.
-# The last name is the one that the linker finds with -lNAME.
-library_names_spec=$lt_library_names_spec
 
-# The coded name of the library, if different from the real name.
-soname_spec=$lt_soname_spec
 
-# Commands used to build and install an old-style archive.
-RANLIB=$lt_RANLIB
-old_archive_cmds=$lt_old_archive_cmds_GCJ
-old_postinstall_cmds=$lt_old_postinstall_cmds
-old_postuninstall_cmds=$lt_old_postuninstall_cmds
 
-# Create an old-style archive from a shared archive.
-old_archive_from_new_cmds=$lt_old_archive_from_new_cmds_GCJ
 
-# Create a temporary old-style archive to link instead of a shared archive.
-old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds_GCJ
 
-# Commands used to build and install a shared archive.
-archive_cmds=$lt_archive_cmds_GCJ
-archive_expsym_cmds=$lt_archive_expsym_cmds_GCJ
-postinstall_cmds=$lt_postinstall_cmds
-postuninstall_cmds=$lt_postuninstall_cmds
 
-# Commands used to build a loadable module (assumed same as above if empty)
-module_cmds=$lt_module_cmds_GCJ
-module_expsym_cmds=$lt_module_expsym_cmds_GCJ
 
-# Commands to strip libraries.
-old_striplib=$lt_old_striplib
-striplib=$lt_striplib
 
-# Dependencies to place before the objects being linked to create a
-# shared library.
-predep_objects=$lt_predep_objects_GCJ
-
-# Dependencies to place after the objects being linked to create a
-# shared library.
-postdep_objects=$lt_postdep_objects_GCJ
-
-# Dependencies to place before the objects being linked to create a
-# shared library.
-predeps=$lt_predeps_GCJ
-
-# Dependencies to place after the objects being linked to create a
-# shared library.
-postdeps=$lt_postdeps_GCJ
-
-# The directories searched by this compiler when creating a shared
-# library
-compiler_lib_search_dirs=$lt_compiler_lib_search_dirs_GCJ
 
-# The library search path used internally by the compiler when linking
-# a shared library.
-compiler_lib_search_path=$lt_compiler_lib_search_path_GCJ
 
-# Method to check whether dependent libraries are shared objects.
-deplibs_check_method=$lt_deplibs_check_method
 
-# Command to use when deplibs_check_method == file_magic.
-file_magic_cmd=$lt_file_magic_cmd
 
-# Flag that allows shared libraries with undefined symbols to be built.
-allow_undefined_flag=$lt_allow_undefined_flag_GCJ
 
-# Flag that forces no undefined symbols.
-no_undefined_flag=$lt_no_undefined_flag_GCJ
 
-# Commands used to finish a libtool library installation in a directory.
-finish_cmds=$lt_finish_cmds
 
-# Same as above, but a single script fragment to be evaled but not shown.
-finish_eval=$lt_finish_eval
 
-# Take the output of nm and produce a listing of raw symbols and C names.
-global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe
 
-# Transform the output of nm in a proper C declaration
-global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl
 
-# Transform the output of nm in a C name address pair
-global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
 
-# This is the shared library runtime path variable.
-runpath_var=$runpath_var
 
-# This is the shared library path variable.
-shlibpath_var=$shlibpath_var
 
-# Is shlibpath searched before the hard-coded library search path?
-shlibpath_overrides_runpath=$shlibpath_overrides_runpath
 
-# How to hardcode a shared library path into an executable.
-hardcode_action=$hardcode_action_GCJ
 
-# Whether we should hardcode library paths into libraries.
-hardcode_into_libs=$hardcode_into_libs
 
-# Flag to hardcode \$libdir into a binary during linking.
-# This must work even if \$libdir does not exist.
-hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_GCJ
 
-# If ld is used when linking, flag to hardcode \$libdir into
-# a binary during linking. This must work even if \$libdir does
-# not exist.
-hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_GCJ
-
-# Whether we need a single -rpath flag with a separated argument.
-hardcode_libdir_separator=$lt_hardcode_libdir_separator_GCJ
-
-# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the
-# resulting binary.
-hardcode_direct=$hardcode_direct_GCJ
-
-# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
-# resulting binary.
-hardcode_minus_L=$hardcode_minus_L_GCJ
-
-# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into
-# the resulting binary.
-hardcode_shlibpath_var=$hardcode_shlibpath_var_GCJ
-
-# Set to yes if building a shared library automatically hardcodes DIR into the library
-# and all subsequent libraries and executables linked against it.
-hardcode_automatic=$hardcode_automatic_GCJ
 
-# Variables whose values should be saved in libtool wrapper scripts and
-# restored at relink time.
-variables_saved_for_relink="$variables_saved_for_relink"
 
-# Whether libtool must link a program against all its dependency libraries.
-link_all_deplibs=$link_all_deplibs_GCJ
 
-# Compile-time system search path for libraries
-sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
 
-# Run-time system search path for libraries
-sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
 
-# Fix the shell variable \$srcfile for the compiler.
-fix_srcfile_path=$lt_fix_srcfile_path
 
-# Set to yes if exported symbols are required.
-always_export_symbols=$always_export_symbols_GCJ
 
-# The commands to list exported symbols.
-export_symbols_cmds=$lt_export_symbols_cmds_GCJ
 
-# The commands to extract the exported symbol list from a shared archive.
-extract_expsyms_cmds=$lt_extract_expsyms_cmds
 
-# Symbols that should not be listed in the preloaded symbols.
-exclude_expsyms=$lt_exclude_expsyms_GCJ
 
-# Symbols that must always be exported.
-include_expsyms=$lt_include_expsyms_GCJ
 
-# ### END LIBTOOL TAG CONFIG: $tagname
 
-__EOF__
 
 
-else
-  # If there is no Makefile yet, we rely on a make rule to execute
-  # `config.status --recheck' to rerun these tests and create the
-  # libtool script then.
-  ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'`
-  if test -f "$ltmain_in"; then
-    test -f Makefile && make "$ltmain"
-  fi
-fi
 
 
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
 
-CC="$lt_save_CC"
 
-	else
-	  tagname=""
-	fi
-	;;
 
-      RC)
 
 
-# Source file extension for RC test sources.
-ac_ext=rc
 
-# Object file extension for compiled RC test sources.
-objext=o
-objext_RC=$objext
 
-# Code to be used in simple compile tests
-lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }'
 
-# Code to be used in simple link tests
-lt_simple_link_test_code="$lt_simple_compile_test_code"
 
-# ltmain only uses $CC for tagged configurations so make sure $CC is set.
 
-# If no C compiler was specified, use CC.
-LTCC=${LTCC-"$CC"}
 
-# If no C compiler flags were specified, use CFLAGS.
-LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
 
-# Allow CC to be a program name with arguments.
-compiler=$CC
 
 
-# save warnings/boilerplate of simple test code
-ac_outfile=conftest.$ac_objext
-echo "$lt_simple_compile_test_code" >conftest.$ac_ext
-eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
-_lt_compiler_boilerplate=`cat conftest.err`
-$rm conftest*
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking dynamic linker characteristics" >&5
+$as_echo_n "checking dynamic linker characteristics... " >&6; }
 
-ac_outfile=conftest.$ac_objext
-echo "$lt_simple_link_test_code" >conftest.$ac_ext
-eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
-_lt_linker_boilerplate=`cat conftest.err`
-$rm -r conftest*
+library_names_spec=
+libname_spec='lib$name'
+soname_spec=
+shrext_cmds=".so"
+postinstall_cmds=
+postuninstall_cmds=
+finish_cmds=
+finish_eval=
+shlibpath_var=
+shlibpath_overrides_runpath=unknown
+version_type=none
+dynamic_linker="$host_os ld.so"
+sys_lib_dlsearch_path_spec="/lib /usr/lib"
+need_lib_prefix=unknown
+hardcode_into_libs=no
 
+# when you set need_version to no, make sure it does not cause -set_version
+# flags to be left without arguments
+need_version=unknown
 
-# Allow CC to be a program name with arguments.
-lt_save_CC="$CC"
-CC=${RC-"windres"}
-compiler=$CC
-compiler_RC=$CC
-for cc_temp in $compiler""; do
-  case $cc_temp in
-    compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
-    distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
-    \-*) ;;
-    *) break;;
-  esac
-done
-cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
+case $host_os in
+aix3*)
+  version_type=linux
+  library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
+  shlibpath_var=LIBPATH
 
-lt_cv_prog_compiler_c_o_RC=yes
+  # AIX 3 has no versioning support, so we append a major version to the name.
+  soname_spec='${libname}${release}${shared_ext}$major'
+  ;;
 
-# The else clause should only fire when bootstrapping the
-# libtool distribution, otherwise you forgot to ship ltmain.sh
-# with your package, and you will get complaints that there are
-# no rules to generate ltmain.sh.
-if test -f "$ltmain"; then
-  # See if we are running on zsh, and set the options which allow our commands through
-  # without removal of \ escapes.
-  if test -n "${ZSH_VERSION+set}" ; then
-    setopt NO_GLOB_SUBST
-  fi
-  # Now quote all the things that may contain metacharacters while being
-  # careful not to overquote the AC_SUBSTed values.  We take copies of the
-  # variables and quote the copies for generation of the libtool script.
-  for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \
-    SED SHELL STRIP \
-    libname_spec library_names_spec soname_spec extract_expsyms_cmds \
-    old_striplib striplib file_magic_cmd finish_cmds finish_eval \
-    deplibs_check_method reload_flag reload_cmds need_locks \
-    lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \
-    lt_cv_sys_global_symbol_to_c_name_address \
-    sys_lib_search_path_spec sys_lib_dlsearch_path_spec \
-    old_postinstall_cmds old_postuninstall_cmds \
-    compiler_RC \
-    CC_RC \
-    LD_RC \
-    lt_prog_compiler_wl_RC \
-    lt_prog_compiler_pic_RC \
-    lt_prog_compiler_static_RC \
-    lt_prog_compiler_no_builtin_flag_RC \
-    export_dynamic_flag_spec_RC \
-    thread_safe_flag_spec_RC \
-    whole_archive_flag_spec_RC \
-    enable_shared_with_static_runtimes_RC \
-    old_archive_cmds_RC \
-    old_archive_from_new_cmds_RC \
-    predep_objects_RC \
-    postdep_objects_RC \
-    predeps_RC \
-    postdeps_RC \
-    compiler_lib_search_path_RC \
-    compiler_lib_search_dirs_RC \
-    archive_cmds_RC \
-    archive_expsym_cmds_RC \
-    postinstall_cmds_RC \
-    postuninstall_cmds_RC \
-    old_archive_from_expsyms_cmds_RC \
-    allow_undefined_flag_RC \
-    no_undefined_flag_RC \
-    export_symbols_cmds_RC \
-    hardcode_libdir_flag_spec_RC \
-    hardcode_libdir_flag_spec_ld_RC \
-    hardcode_libdir_separator_RC \
-    hardcode_automatic_RC \
-    module_cmds_RC \
-    module_expsym_cmds_RC \
-    lt_cv_prog_compiler_c_o_RC \
-    fix_srcfile_path_RC \
-    exclude_expsyms_RC \
-    include_expsyms_RC; do
-
-    case $var in
-    old_archive_cmds_RC | \
-    old_archive_from_new_cmds_RC | \
-    archive_cmds_RC | \
-    archive_expsym_cmds_RC | \
-    module_cmds_RC | \
-    module_expsym_cmds_RC | \
-    old_archive_from_expsyms_cmds_RC | \
-    export_symbols_cmds_RC | \
-    extract_expsyms_cmds | reload_cmds | finish_cmds | \
-    postinstall_cmds | postuninstall_cmds | \
-    old_postinstall_cmds | old_postuninstall_cmds | \
-    sys_lib_search_path_spec | sys_lib_dlsearch_path_spec)
-      # Double-quote double-evaled strings.
-      eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\""
-      ;;
-    *)
-      eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\""
+aix[4-9]*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  hardcode_into_libs=yes
+  if test "$host_cpu" = ia64; then
+    # AIX 5 supports IA64
+    library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
+    shlibpath_var=LD_LIBRARY_PATH
+  else
+    # With GCC up to 2.95.x, collect2 would create an import file
+    # for dependence libraries.  The import file would start with
+    # the line `#! .'.  This would cause the generated library to
+    # depend on `.', always an invalid library.  This was fixed in
+    # development snapshots of GCC prior to 3.0.
+    case $host_os in
+      aix4 | aix4.[01] | aix4.[01].*)
+      if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
+	   echo ' yes '
+	   echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then
+	:
+      else
+	can_build_shared=no
+      fi
       ;;
     esac
-  done
+    # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
+    # soname into executable. Probably we can add versioning support to
+    # collect2, so additional links can be useful in future.
+    if test "$aix_use_runtimelinking" = yes; then
+      # If using run time linking (on AIX 4.2 or later) use lib<name>.so
+      # instead of lib<name>.a to let people know that these are not
+      # typical AIX shared libraries.
+      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    else
+      # We preserve .a as extension for shared libraries through AIX4.2
+      # and later when we are not doing run time linking.
+      library_names_spec='${libname}${release}.a $libname.a'
+      soname_spec='${libname}${release}${shared_ext}$major'
+    fi
+    shlibpath_var=LIBPATH
+  fi
+  ;;
 
-  case $lt_echo in
-  *'\$0 --fallback-echo"')
-    lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'`
+amigaos*)
+  case $host_cpu in
+  powerpc)
+    # Since July 2007 AmigaOS4 officially supports .so libraries.
+    # When compiling the executable, add -use-dynld -Lsobjs: to the compileline.
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    ;;
+  m68k)
+    library_names_spec='$libname.ixlibrary $libname.a'
+    # Create ${libname}_ixlibrary.a entries in /sys/libs.
+    finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$ECHO "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
     ;;
   esac
+  ;;
 
-cfgfile="$ofile"
-
-  cat <<__EOF__ >> "$cfgfile"
-# ### BEGIN LIBTOOL TAG CONFIG: $tagname
-
-# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
-
-# Shell to use when invoking shell scripts.
-SHELL=$lt_SHELL
-
-# Whether or not to build shared libraries.
-build_libtool_libs=$enable_shared
+beos*)
+  library_names_spec='${libname}${shared_ext}'
+  dynamic_linker="$host_os ld.so"
+  shlibpath_var=LIBRARY_PATH
+  ;;
 
-# Whether or not to build static libraries.
-build_old_libs=$enable_static
+bsdi[45]*)
+  version_type=linux
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
+  sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
+  # the default ld.so.conf also contains /usr/contrib/lib and
+  # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
+  # libtool to hard-code these into programs
+  ;;
 
-# Whether or not to add -lc for building shared libraries.
-build_libtool_need_lc=$archive_cmds_need_lc_RC
+cygwin* | mingw* | pw32* | cegcc*)
+  version_type=windows
+  shrext_cmds=".dll"
+  need_version=no
+  need_lib_prefix=no
 
-# Whether or not to disallow shared libs when runtime libs are static
-allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes_RC
+  case $GCC,$host_os in
+  yes,cygwin* | yes,mingw* | yes,pw32* | yes,cegcc*)
+    library_names_spec='$libname.dll.a'
+    # DLL is installed to $(libdir)/../bin by postinstall_cmds
+    postinstall_cmds='base_file=`basename \${file}`~
+      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
+      dldir=$destdir/`dirname \$dlpath`~
+      test -d \$dldir || mkdir -p \$dldir~
+      $install_prog $dir/$dlname \$dldir/$dlname~
+      chmod a+x \$dldir/$dlname~
+      if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then
+        eval '\''$striplib \$dldir/$dlname'\'' || exit \$?;
+      fi'
+    postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
+      dlpath=$dir/\$dldll~
+       $RM \$dlpath'
+    shlibpath_overrides_runpath=yes
 
-# Whether or not to optimize for fast installation.
-fast_install=$enable_fast_install
+    case $host_os in
+    cygwin*)
+      # Cygwin DLLs use 'cyg' prefix rather than 'lib'
+      soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+      sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib"
+      ;;
+    mingw* | cegcc*)
+      # MinGW DLLs use traditional 'lib' prefix
+      soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+      sys_lib_search_path_spec=`$CC -print-search-dirs | $GREP "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
+      if $ECHO "$sys_lib_search_path_spec" | $GREP ';[c-zC-Z]:/' >/dev/null; then
+        # It is most probably a Windows format PATH printed by
+        # mingw gcc, but we are running on Cygwin. Gcc prints its search
+        # path with ; separators, and with drive letters. We can handle the
+        # drive letters (cygwin fileutils understands them), so leave them,
+        # especially as we might pass files found there to a mingw objdump,
+        # which wouldn't understand a cygwinified path. Ahh.
+        sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
+      else
+        sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED  -e "s/$PATH_SEPARATOR/ /g"`
+      fi
+      ;;
+    pw32*)
+      # pw32 DLLs use 'pw' prefix rather than 'lib'
+      library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+      ;;
+    esac
+    ;;
 
-# The host system.
-host_alias=$host_alias
-host=$host
-host_os=$host_os
+  *)
+    library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib'
+    ;;
+  esac
+  dynamic_linker='Win32 ld.exe'
+  # FIXME: first we should search . and the directory the executable is in
+  shlibpath_var=PATH
+  ;;
 
-# The build system.
-build_alias=$build_alias
-build=$build
-build_os=$build_os
+darwin* | rhapsody*)
+  dynamic_linker="$host_os dyld"
+  version_type=darwin
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext'
+  soname_spec='${libname}${release}${major}$shared_ext'
+  shlibpath_overrides_runpath=yes
+  shlibpath_var=DYLD_LIBRARY_PATH
+  shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
 
-# An echo program that does not interpret backslashes.
-echo=$lt_echo
+  sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
+  ;;
 
-# The archiver.
-AR=$lt_AR
-AR_FLAGS=$lt_AR_FLAGS
+dgux*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  ;;
 
-# A C compiler.
-LTCC=$lt_LTCC
+freebsd1*)
+  dynamic_linker=no
+  ;;
 
-# LTCC compiler flags.
-LTCFLAGS=$lt_LTCFLAGS
+freebsd* | dragonfly*)
+  # DragonFly does not have aout.  When/if they implement a new
+  # versioning mechanism, adjust this.
+  if test -x /usr/bin/objformat; then
+    objformat=`/usr/bin/objformat`
+  else
+    case $host_os in
+    freebsd[123]*) objformat=aout ;;
+    *) objformat=elf ;;
+    esac
+  fi
+  version_type=freebsd-$objformat
+  case $version_type in
+    freebsd-elf*)
+      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
+      need_version=no
+      need_lib_prefix=no
+      ;;
+    freebsd-*)
+      library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
+      need_version=yes
+      ;;
+  esac
+  shlibpath_var=LD_LIBRARY_PATH
+  case $host_os in
+  freebsd2*)
+    shlibpath_overrides_runpath=yes
+    ;;
+  freebsd3.[01]* | freebsdelf3.[01]*)
+    shlibpath_overrides_runpath=yes
+    hardcode_into_libs=yes
+    ;;
+  freebsd3.[2-9]* | freebsdelf3.[2-9]* | \
+  freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1)
+    shlibpath_overrides_runpath=no
+    hardcode_into_libs=yes
+    ;;
+  *) # from 4.6 on, and DragonFly
+    shlibpath_overrides_runpath=yes
+    hardcode_into_libs=yes
+    ;;
+  esac
+  ;;
 
-# A language-specific compiler.
-CC=$lt_compiler_RC
+gnu*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  hardcode_into_libs=yes
+  ;;
 
-# Is the compiler the GNU C compiler?
-with_gcc=$GCC_RC
+hpux9* | hpux10* | hpux11*)
+  # Give a soname corresponding to the major version so that dld.sl refuses to
+  # link against other versions.
+  version_type=sunos
+  need_lib_prefix=no
+  need_version=no
+  case $host_cpu in
+  ia64*)
+    shrext_cmds='.so'
+    hardcode_into_libs=yes
+    dynamic_linker="$host_os dld.so"
+    shlibpath_var=LD_LIBRARY_PATH
+    shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    soname_spec='${libname}${release}${shared_ext}$major'
+    if test "X$HPUX_IA64_MODE" = X32; then
+      sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
+    else
+      sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
+    fi
+    sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+    ;;
+  hppa*64*)
+    shrext_cmds='.sl'
+    hardcode_into_libs=yes
+    dynamic_linker="$host_os dld.sl"
+    shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
+    shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    soname_spec='${libname}${release}${shared_ext}$major'
+    sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
+    sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+    ;;
+  *)
+    shrext_cmds='.sl'
+    dynamic_linker="$host_os dld.sl"
+    shlibpath_var=SHLIB_PATH
+    shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    soname_spec='${libname}${release}${shared_ext}$major'
+    ;;
+  esac
+  # HP-UX runs *really* slowly unless shared libraries are mode 555.
+  postinstall_cmds='chmod 555 $lib'
+  ;;
 
-# An ERE matcher.
-EGREP=$lt_EGREP
+interix[3-9]*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  ;;
 
-# The linker used to build libraries.
-LD=$lt_LD_RC
+irix5* | irix6* | nonstopux*)
+  case $host_os in
+    nonstopux*) version_type=nonstopux ;;
+    *)
+	if test "$lt_cv_prog_gnu_ld" = yes; then
+		version_type=linux
+	else
+		version_type=irix
+	fi ;;
+  esac
+  need_lib_prefix=no
+  need_version=no
+  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
+  case $host_os in
+  irix5* | nonstopux*)
+    libsuff= shlibsuff=
+    ;;
+  *)
+    case $LD in # libtool.m4 will add one of these switches to LD
+    *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
+      libsuff= shlibsuff= libmagic=32-bit;;
+    *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
+      libsuff=32 shlibsuff=N32 libmagic=N32;;
+    *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
+      libsuff=64 shlibsuff=64 libmagic=64-bit;;
+    *) libsuff= shlibsuff= libmagic=never-match;;
+    esac
+    ;;
+  esac
+  shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
+  shlibpath_overrides_runpath=no
+  sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
+  sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
+  hardcode_into_libs=yes
+  ;;
 
-# Whether we need hard or soft links.
-LN_S=$lt_LN_S
+# No shared lib support for Linux oldld, aout, or coff.
+linux*oldld* | linux*aout* | linux*coff*)
+  dynamic_linker=no
+  ;;
 
-# A BSD-compatible nm program.
-NM=$lt_NM
+# This must be Linux ELF.
+linux* | k*bsd*-gnu)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  # Some binutils ld are patched to set DT_RUNPATH
+  save_LDFLAGS=$LDFLAGS
+  save_libdir=$libdir
+  eval "libdir=/foo; wl=\"$lt_prog_compiler_wl_CXX\"; \
+       LDFLAGS=\"\$LDFLAGS $hardcode_libdir_flag_spec_CXX\""
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
 
-# A symbol stripping program
-STRIP=$lt_STRIP
+int
+main ()
+{
 
-# Used to examine libraries when file_magic_cmd begins "file"
-MAGIC_CMD=$MAGIC_CMD
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_cxx_try_link "$LINENO"; then :
+  if  ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null; then :
+  shlibpath_overrides_runpath=yes
+fi
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+  LDFLAGS=$save_LDFLAGS
+  libdir=$save_libdir
 
-# Used on cygwin: DLL creation program.
-DLLTOOL="$DLLTOOL"
+  # This implies no fast_install, which is unacceptable.
+  # Some rework will be needed to allow for fast_install
+  # before this can be enabled.
+  hardcode_into_libs=yes
 
-# Used on cygwin: object dumper.
-OBJDUMP="$OBJDUMP"
+  # Append ld.so.conf contents to the search path
+  if test -f /etc/ld.so.conf; then
+    lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[	 ]*hwcap[	 ]/d;s/[:,	]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
+    sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
+  fi
 
-# Used on cygwin: assembler.
-AS="$AS"
+  # We used to test for /lib/ld.so.1 and disable shared libraries on
+  # powerpc, because MkLinux only supported shared libraries with the
+  # GNU dynamic linker.  Since this was broken with cross compilers,
+  # most powerpc-linux boxes support dynamic linking these days and
+  # people can always --disable-shared, the test was removed, and we
+  # assume the GNU/Linux dynamic linker is in use.
+  dynamic_linker='GNU/Linux ld.so'
+  ;;
 
-# The name of the directory that contains temporary libtool files.
-objdir=$objdir
+netbsdelf*-gnu)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  dynamic_linker='NetBSD ld.elf_so'
+  ;;
 
-# How to create reloadable object files.
-reload_flag=$lt_reload_flag
-reload_cmds=$lt_reload_cmds
+netbsd*)
+  version_type=sunos
+  need_lib_prefix=no
+  need_version=no
+  if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+    finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+    dynamic_linker='NetBSD (a.out) ld.so'
+  else
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+    soname_spec='${libname}${release}${shared_ext}$major'
+    dynamic_linker='NetBSD ld.elf_so'
+  fi
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  hardcode_into_libs=yes
+  ;;
 
-# How to pass a linker flag through the compiler.
-wl=$lt_lt_prog_compiler_wl_RC
+newsos6)
+  version_type=linux
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  ;;
 
-# Object file suffix (normally "o").
-objext="$ac_objext"
+*nto* | *qnx*)
+  version_type=qnx
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  dynamic_linker='ldqnx.so'
+  ;;
 
-# Old archive suffix (normally "a").
-libext="$libext"
+openbsd*)
+  version_type=sunos
+  sys_lib_dlsearch_path_spec="/usr/lib"
+  need_lib_prefix=no
+  # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
+  case $host_os in
+    openbsd3.3 | openbsd3.3.*)	need_version=yes ;;
+    *)				need_version=no  ;;
+  esac
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+    case $host_os in
+      openbsd2.[89] | openbsd2.[89].*)
+	shlibpath_overrides_runpath=no
+	;;
+      *)
+	shlibpath_overrides_runpath=yes
+	;;
+      esac
+  else
+    shlibpath_overrides_runpath=yes
+  fi
+  ;;
 
-# Shared library suffix (normally ".so").
-shrext_cmds='$shrext_cmds'
+os2*)
+  libname_spec='$name'
+  shrext_cmds=".dll"
+  need_lib_prefix=no
+  library_names_spec='$libname${shared_ext} $libname.a'
+  dynamic_linker='OS/2 ld.exe'
+  shlibpath_var=LIBPATH
+  ;;
 
-# Executable file suffix (normally "").
-exeext="$exeext"
+osf3* | osf4* | osf5*)
+  version_type=osf
+  need_lib_prefix=no
+  need_version=no
+  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  shlibpath_var=LD_LIBRARY_PATH
+  sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
+  sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
+  ;;
 
-# Additional compiler flags for building library objects.
-pic_flag=$lt_lt_prog_compiler_pic_RC
-pic_mode=$pic_mode
+rdos*)
+  dynamic_linker=no
+  ;;
 
-# What is the maximum length of a command?
-max_cmd_len=$lt_cv_sys_max_cmd_len
+solaris*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  hardcode_into_libs=yes
+  # ldd complains unless libraries are executable
+  postinstall_cmds='chmod +x $lib'
+  ;;
 
-# Does compiler simultaneously support -c and -o options?
-compiler_c_o=$lt_lt_cv_prog_compiler_c_o_RC
+sunos4*)
+  version_type=sunos
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+  finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  if test "$with_gnu_ld" = yes; then
+    need_lib_prefix=no
+  fi
+  need_version=yes
+  ;;
 
-# Must we lock files when doing compilation?
-need_locks=$lt_need_locks
+sysv4 | sysv4.3*)
+  version_type=linux
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  case $host_vendor in
+    sni)
+      shlibpath_overrides_runpath=no
+      need_lib_prefix=no
+      runpath_var=LD_RUN_PATH
+      ;;
+    siemens)
+      need_lib_prefix=no
+      ;;
+    motorola)
+      need_lib_prefix=no
+      need_version=no
+      shlibpath_overrides_runpath=no
+      sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
+      ;;
+  esac
+  ;;
 
-# Do we need the lib prefix for modules?
-need_lib_prefix=$need_lib_prefix
+sysv4*MP*)
+  if test -d /usr/nec ;then
+    version_type=linux
+    library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
+    soname_spec='$libname${shared_ext}.$major'
+    shlibpath_var=LD_LIBRARY_PATH
+  fi
+  ;;
 
-# Do we need a version for libraries?
-need_version=$need_version
+sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
+  version_type=freebsd-elf
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  hardcode_into_libs=yes
+  if test "$with_gnu_ld" = yes; then
+    sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
+  else
+    sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
+    case $host_os in
+      sco3.2v5*)
+        sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
+	;;
+    esac
+  fi
+  sys_lib_dlsearch_path_spec='/usr/lib'
+  ;;
 
-# Whether dlopen is supported.
-dlopen_support=$enable_dlopen
+tpf*)
+  # TPF is a cross-target only.  Preferred cross-host = GNU/Linux.
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  ;;
 
-# Whether dlopen of programs is supported.
-dlopen_self=$enable_dlopen_self
+uts4*)
+  version_type=linux
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  ;;
 
-# Whether dlopen of statically linked programs is supported.
-dlopen_self_static=$enable_dlopen_self_static
+*)
+  dynamic_linker=no
+  ;;
+esac
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $dynamic_linker" >&5
+$as_echo "$dynamic_linker" >&6; }
+test "$dynamic_linker" = no && can_build_shared=no
 
-# Compiler flag to prevent dynamic linking.
-link_static_flag=$lt_lt_prog_compiler_static_RC
+variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
+if test "$GCC" = yes; then
+  variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
+fi
 
-# Compiler flag to turn off builtin functions.
-no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_RC
+if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then
+  sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec"
+fi
+if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then
+  sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec"
+fi
 
-# Compiler flag to allow reflexive dlopens.
-export_dynamic_flag_spec=$lt_export_dynamic_flag_spec_RC
 
-# Compiler flag to generate shared objects directly from archives.
-whole_archive_flag_spec=$lt_whole_archive_flag_spec_RC
 
-# Compiler flag to generate thread-safe objects.
-thread_safe_flag_spec=$lt_thread_safe_flag_spec_RC
 
-# Library versioning type.
-version_type=$version_type
 
-# Format of library name prefix.
-libname_spec=$lt_libname_spec
 
-# List of archive names.  First name is the real one, the rest are links.
-# The last name is the one that the linker finds with -lNAME.
-library_names_spec=$lt_library_names_spec
 
-# The coded name of the library, if different from the real name.
-soname_spec=$lt_soname_spec
 
-# Commands used to build and install an old-style archive.
-RANLIB=$lt_RANLIB
-old_archive_cmds=$lt_old_archive_cmds_RC
-old_postinstall_cmds=$lt_old_postinstall_cmds
-old_postuninstall_cmds=$lt_old_postuninstall_cmds
 
-# Create an old-style archive from a shared archive.
-old_archive_from_new_cmds=$lt_old_archive_from_new_cmds_RC
 
-# Create a temporary old-style archive to link instead of a shared archive.
-old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds_RC
 
-# Commands used to build and install a shared archive.
-archive_cmds=$lt_archive_cmds_RC
-archive_expsym_cmds=$lt_archive_expsym_cmds_RC
-postinstall_cmds=$lt_postinstall_cmds
-postuninstall_cmds=$lt_postuninstall_cmds
 
-# Commands used to build a loadable module (assumed same as above if empty)
-module_cmds=$lt_module_cmds_RC
-module_expsym_cmds=$lt_module_expsym_cmds_RC
 
-# Commands to strip libraries.
-old_striplib=$lt_old_striplib
-striplib=$lt_striplib
 
-# Dependencies to place before the objects being linked to create a
-# shared library.
-predep_objects=$lt_predep_objects_RC
-
-# Dependencies to place after the objects being linked to create a
-# shared library.
-postdep_objects=$lt_postdep_objects_RC
-
-# Dependencies to place before the objects being linked to create a
-# shared library.
-predeps=$lt_predeps_RC
-
-# Dependencies to place after the objects being linked to create a
-# shared library.
-postdeps=$lt_postdeps_RC
-
-# The directories searched by this compiler when creating a shared
-# library
-compiler_lib_search_dirs=$lt_compiler_lib_search_dirs_RC
 
-# The library search path used internally by the compiler when linking
-# a shared library.
-compiler_lib_search_path=$lt_compiler_lib_search_path_RC
 
-# Method to check whether dependent libraries are shared objects.
-deplibs_check_method=$lt_deplibs_check_method
 
-# Command to use when deplibs_check_method == file_magic.
-file_magic_cmd=$lt_file_magic_cmd
 
-# Flag that allows shared libraries with undefined symbols to be built.
-allow_undefined_flag=$lt_allow_undefined_flag_RC
 
-# Flag that forces no undefined symbols.
-no_undefined_flag=$lt_no_undefined_flag_RC
 
-# Commands used to finish a libtool library installation in a directory.
-finish_cmds=$lt_finish_cmds
 
-# Same as above, but a single script fragment to be evaled but not shown.
-finish_eval=$lt_finish_eval
 
-# Take the output of nm and produce a listing of raw symbols and C names.
-global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe
 
-# Transform the output of nm in a proper C declaration
-global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl
 
-# Transform the output of nm in a C name address pair
-global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
 
-# This is the shared library runtime path variable.
-runpath_var=$runpath_var
 
-# This is the shared library path variable.
-shlibpath_var=$shlibpath_var
 
-# Is shlibpath searched before the hard-coded library search path?
-shlibpath_overrides_runpath=$shlibpath_overrides_runpath
 
-# How to hardcode a shared library path into an executable.
-hardcode_action=$hardcode_action_RC
 
-# Whether we should hardcode library paths into libraries.
-hardcode_into_libs=$hardcode_into_libs
 
-# Flag to hardcode \$libdir into a binary during linking.
-# This must work even if \$libdir does not exist.
-hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_RC
 
-# If ld is used when linking, flag to hardcode \$libdir into
-# a binary during linking. This must work even if \$libdir does
-# not exist.
-hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_RC
-
-# Whether we need a single -rpath flag with a separated argument.
-hardcode_libdir_separator=$lt_hardcode_libdir_separator_RC
-
-# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the
-# resulting binary.
-hardcode_direct=$hardcode_direct_RC
-
-# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
-# resulting binary.
-hardcode_minus_L=$hardcode_minus_L_RC
-
-# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into
-# the resulting binary.
-hardcode_shlibpath_var=$hardcode_shlibpath_var_RC
-
-# Set to yes if building a shared library automatically hardcodes DIR into the library
-# and all subsequent libraries and executables linked against it.
-hardcode_automatic=$hardcode_automatic_RC
 
-# Variables whose values should be saved in libtool wrapper scripts and
-# restored at relink time.
-variables_saved_for_relink="$variables_saved_for_relink"
 
-# Whether libtool must link a program against all its dependency libraries.
-link_all_deplibs=$link_all_deplibs_RC
 
-# Compile-time system search path for libraries
-sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
 
-# Run-time system search path for libraries
-sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
 
-# Fix the shell variable \$srcfile for the compiler.
-fix_srcfile_path=$lt_fix_srcfile_path
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to hardcode library paths into programs" >&5
+$as_echo_n "checking how to hardcode library paths into programs... " >&6; }
+hardcode_action_CXX=
+if test -n "$hardcode_libdir_flag_spec_CXX" ||
+   test -n "$runpath_var_CXX" ||
+   test "X$hardcode_automatic_CXX" = "Xyes" ; then
 
-# Set to yes if exported symbols are required.
-always_export_symbols=$always_export_symbols_RC
+  # We can hardcode non-existent directories.
+  if test "$hardcode_direct_CXX" != no &&
+     # If the only mechanism to avoid hardcoding is shlibpath_var, we
+     # have to relink, otherwise we might link with an installed library
+     # when we should be linking with a yet-to-be-installed one
+     ## test "$_LT_TAGVAR(hardcode_shlibpath_var, CXX)" != no &&
+     test "$hardcode_minus_L_CXX" != no; then
+    # Linking always hardcodes the temporary library directory.
+    hardcode_action_CXX=relink
+  else
+    # We can link without hardcoding, and we can hardcode nonexisting dirs.
+    hardcode_action_CXX=immediate
+  fi
+else
+  # We cannot hardcode anything, or else we can only hardcode existing
+  # directories.
+  hardcode_action_CXX=unsupported
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $hardcode_action_CXX" >&5
+$as_echo "$hardcode_action_CXX" >&6; }
 
-# The commands to list exported symbols.
-export_symbols_cmds=$lt_export_symbols_cmds_RC
+if test "$hardcode_action_CXX" = relink ||
+   test "$inherit_rpath_CXX" = yes; then
+  # Fast installation is not supported
+  enable_fast_install=no
+elif test "$shlibpath_overrides_runpath" = yes ||
+     test "$enable_shared" = no; then
+  # Fast installation is not necessary
+  enable_fast_install=needless
+fi
 
-# The commands to extract the exported symbol list from a shared archive.
-extract_expsyms_cmds=$lt_extract_expsyms_cmds
 
-# Symbols that should not be listed in the preloaded symbols.
-exclude_expsyms=$lt_exclude_expsyms_RC
 
-# Symbols that must always be exported.
-include_expsyms=$lt_include_expsyms_RC
 
-# ### END LIBTOOL TAG CONFIG: $tagname
 
-__EOF__
 
 
-else
-  # If there is no Makefile yet, we rely on a make rule to execute
-  # `config.status --recheck' to rerun these tests and create the
-  # libtool script then.
-  ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'`
-  if test -f "$ltmain_in"; then
-    test -f Makefile && make "$ltmain"
-  fi
-fi
+  fi # test -n "$compiler"
 
+  CC=$lt_save_CC
+  LDCXX=$LD
+  LD=$lt_save_LD
+  GCC=$lt_save_GCC
+  with_gnu_ld=$lt_save_with_gnu_ld
+  lt_cv_path_LDCXX=$lt_cv_path_LD
+  lt_cv_path_LD=$lt_save_path_LD
+  lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld
+  lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld
+fi # test "$_lt_caught_CXX_error" != yes
 
 ac_ext=c
 ac_cpp='$CPP $CPPFLAGS'
@@ -20658,48 +14925,6 @@
 ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
 ac_compiler_gnu=$ac_cv_c_compiler_gnu
 
-CC="$lt_save_CC"
-
-	;;
-
-      *)
-	{ { $as_echo "$as_me:$LINENO: error: Unsupported tag name: $tagname" >&5
-$as_echo "$as_me: error: Unsupported tag name: $tagname" >&2;}
-   { (exit 1); exit 1; }; }
-	;;
-      esac
-
-      # Append the new tag name to the list of available tags.
-      if test -n "$tagname" ; then
-      available_tags="$available_tags $tagname"
-    fi
-    fi
-  done
-  IFS="$lt_save_ifs"
-
-  # Now substitute the updated list of available tags.
-  if eval "sed -e 's/^available_tags=.*\$/available_tags=\"$available_tags\"/' \"$ofile\" > \"${ofile}T\""; then
-    mv "${ofile}T" "$ofile"
-    chmod +x "$ofile"
-  else
-    rm -f "${ofile}T"
-    { { $as_echo "$as_me:$LINENO: error: unable to update list of available tagged configurations." >&5
-$as_echo "$as_me: error: unable to update list of available tagged configurations." >&2;}
-   { (exit 1); exit 1; }; }
-  fi
-fi
-
-
-
-# This can be used to rebuild libtool when needed
-LIBTOOL_DEPS="$ac_aux_dir/ltmain.sh"
-
-# Always use our own libtool.
-LIBTOOL='$(SHELL) $(top_builddir)/libtool'
-
-# Prevent multiple expansion
-
-
 
 
 
@@ -20712,10 +14937,12 @@
 
 
 
+        ac_config_commands="$ac_config_commands libtool"
 
 
 
 
+# Only expand once:
 
 
 if test -n "$ac_tool_prefix"; then
@@ -20723,9 +14950,9 @@
   do
     # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
 set dummy $ac_tool_prefix$ac_prog; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 $as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_WINDRES+set}" = set; then
+if test "${ac_cv_prog_WINDRES+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
   if test -n "$WINDRES"; then
@@ -20736,24 +14963,24 @@
 do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
   if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_WINDRES="$ac_tool_prefix$ac_prog"
-    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
-done
+  done
 IFS=$as_save_IFS
 
 fi
 fi
 WINDRES=$ac_cv_prog_WINDRES
 if test -n "$WINDRES"; then
-  { $as_echo "$as_me:$LINENO: result: $WINDRES" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $WINDRES" >&5
 $as_echo "$WINDRES" >&6; }
 else
-  { $as_echo "$as_me:$LINENO: result: no" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
 $as_echo "no" >&6; }
 fi
 
@@ -20767,9 +14994,9 @@
 do
   # Extract the first word of "$ac_prog", so it can be a program name with args.
 set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 $as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_ac_ct_WINDRES+set}" = set; then
+if test "${ac_cv_prog_ac_ct_WINDRES+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
   if test -n "$ac_ct_WINDRES"; then
@@ -20780,24 +15007,24 @@
 do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
   if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_ac_ct_WINDRES="$ac_prog"
-    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
-done
+  done
 IFS=$as_save_IFS
 
 fi
 fi
 ac_ct_WINDRES=$ac_cv_prog_ac_ct_WINDRES
 if test -n "$ac_ct_WINDRES"; then
-  { $as_echo "$as_me:$LINENO: result: $ac_ct_WINDRES" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_WINDRES" >&5
 $as_echo "$ac_ct_WINDRES" >&6; }
 else
-  { $as_echo "$as_me:$LINENO: result: no" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
 $as_echo "no" >&6; }
 fi
 
@@ -20810,7 +15037,7 @@
   else
     case $cross_compiling:$ac_tool_warned in
 yes:)
-{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
 ac_tool_warned=yes ;;
 esac
@@ -20819,19 +15046,14 @@
 fi
 
 
-
- { $as_echo "$as_me:$LINENO: checking whether byte ordering is bigendian" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether byte ordering is bigendian" >&5
 $as_echo_n "checking whether byte ordering is bigendian... " >&6; }
-if test "${ac_cv_c_bigendian+set}" = set; then
+if test "${ac_cv_c_bigendian+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
   ac_cv_c_bigendian=unknown
     # See if we're dealing with a universal compiler.
-    cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+    cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 #ifndef __APPLE_CC__
 	       not a universal capable compiler
@@ -20839,46 +15061,34 @@
 	     typedef int dummy;
 
 _ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_compile") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest.$ac_objext; then
+if ac_fn_c_try_compile "$LINENO"; then :
 
 	# Check for potential -arch flags.  It is not universal unless
-	# there are some -arch flags.  Note that *ppc* also matches
-	# ppc64.  This check is also rather less than ideal.
-	case "${CC} ${CFLAGS} ${CPPFLAGS} ${LDFLAGS}" in  #(
-	  *-arch*ppc*|*-arch*i386*|*-arch*x86_64*) ac_cv_c_bigendian=universal;;
-	esac
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-
+	# there are at least two -arch flags with different values.
+	ac_arch=
+	ac_prev=
+	for ac_word in $CC $CFLAGS $CPPFLAGS $LDFLAGS; do
+	 if test -n "$ac_prev"; then
+	   case $ac_word in
+	     i?86 | x86_64 | ppc | ppc64)
+	       if test -z "$ac_arch" || test "$ac_arch" = "$ac_word"; then
+		 ac_arch=$ac_word
+	       else
+		 ac_cv_c_bigendian=universal
+		 break
+	       fi
+	       ;;
+	   esac
+	   ac_prev=
+	 elif test "x$ac_word" = "x-arch"; then
+	   ac_prev=arch
+	 fi
+       done
 fi
-
 rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
     if test $ac_cv_c_bigendian = unknown; then
       # See if sys/param.h defines the BYTE_ORDER macro.
-      cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+      cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 #include <sys/types.h>
 	     #include <sys/param.h>
@@ -20896,30 +15106,9 @@
   return 0;
 }
 _ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_compile") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest.$ac_objext; then
+if ac_fn_c_try_compile "$LINENO"; then :
   # It does; now see whether it defined to BIG_ENDIAN or not.
-	 cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+	 cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 #include <sys/types.h>
 		#include <sys/param.h>
@@ -20935,49 +15124,18 @@
   return 0;
 }
 _ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_compile") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest.$ac_objext; then
+if ac_fn_c_try_compile "$LINENO"; then :
   ac_cv_c_bigendian=yes
 else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-	ac_cv_c_bigendian=no
+  ac_cv_c_bigendian=no
 fi
-
 rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-
 fi
-
 rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
     fi
     if test $ac_cv_c_bigendian = unknown; then
       # See if <limits.h> defines _LITTLE_ENDIAN or _BIG_ENDIAN (e.g., Solaris).
-      cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+      cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 #include <limits.h>
 
@@ -20992,30 +15150,9 @@
   return 0;
 }
 _ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_compile") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest.$ac_objext; then
+if ac_fn_c_try_compile "$LINENO"; then :
   # It does; now see whether it defined to _BIG_ENDIAN or not.
-	 cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+	 cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 #include <limits.h>
 
@@ -21030,51 +15167,20 @@
   return 0;
 }
 _ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_compile") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest.$ac_objext; then
+if ac_fn_c_try_compile "$LINENO"; then :
   ac_cv_c_bigendian=yes
 else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-	ac_cv_c_bigendian=no
+  ac_cv_c_bigendian=no
 fi
-
 rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-
 fi
-
 rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
     fi
     if test $ac_cv_c_bigendian = unknown; then
       # Compile a test program.
-      if test "$cross_compiling" = yes; then
+      if test "$cross_compiling" = yes; then :
   # Try to guess by grepping values from an object file.
-	 cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+	 cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 short int ascii_mm[] =
 		  { 0x4249, 0x4765, 0x6E44, 0x6961, 0x6E53, 0x7953, 0 };
@@ -21100,24 +15206,7 @@
   return 0;
 }
 _ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_compile") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest.$ac_objext; then
+if ac_fn_c_try_compile "$LINENO"; then :
   if grep BIGenDianSyS conftest.$ac_objext >/dev/null; then
 	      ac_cv_c_bigendian=yes
 	    fi
@@ -21129,20 +15218,10 @@
 		ac_cv_c_bigendian=unknown
 	      fi
 	    fi
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-
 fi
-
 rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
 else
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 $ac_includes_default
 int
@@ -21162,81 +15241,43 @@
   return 0;
 }
 _ACEOF
-rm -f conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_link") 2>&5
-  ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
-  { (case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_try") 2>&5
-  ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
+if ac_fn_c_try_run "$LINENO"; then :
   ac_cv_c_bigendian=no
 else
-  $as_echo "$as_me: program exited with status $ac_status" >&5
-$as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-( exit $ac_status )
-ac_cv_c_bigendian=yes
+  ac_cv_c_bigendian=yes
 fi
-rm -rf conftest.dSYM
-rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
+  conftest.$ac_objext conftest.beam conftest.$ac_ext
 fi
 
-
     fi
 fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_c_bigendian" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_bigendian" >&5
 $as_echo "$ac_cv_c_bigendian" >&6; }
  case $ac_cv_c_bigendian in #(
    yes)
-     cat >>confdefs.h <<\_ACEOF
-#define WORDS_BIGENDIAN 1
-_ACEOF
+     $as_echo "#define WORDS_BIGENDIAN 1" >>confdefs.h
 ;; #(
    no)
       ;; #(
    universal)
 
-cat >>confdefs.h <<\_ACEOF
-#define AC_APPLE_UNIVERSAL_BUILD 1
-_ACEOF
+$as_echo "#define AC_APPLE_UNIVERSAL_BUILD 1" >>confdefs.h
 
      ;; #(
    *)
-     { { $as_echo "$as_me:$LINENO: error: unknown endianness
- presetting ac_cv_c_bigendian=no (or yes) will help" >&5
-$as_echo "$as_me: error: unknown endianness
- presetting ac_cv_c_bigendian=no (or yes) will help" >&2;}
-   { (exit 1); exit 1; }; } ;;
+     as_fn_error "unknown endianness
+ presetting ac_cv_c_bigendian=no (or yes) will help" "$LINENO" 5 ;;
  esac
 
-{ $as_echo "$as_me:$LINENO: checking for inline" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for inline" >&5
 $as_echo_n "checking for inline... " >&6; }
-if test "${ac_cv_c_inline+set}" = set; then
+if test "${ac_cv_c_inline+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
   ac_cv_c_inline=no
 for ac_kw in inline __inline__ __inline; do
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 #ifndef __cplusplus
 typedef int foo_t;
@@ -21245,41 +15286,17 @@
 #endif
 
 _ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_compile") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest.$ac_objext; then
+if ac_fn_c_try_compile "$LINENO"; then :
   ac_cv_c_inline=$ac_kw
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-
 fi
-
 rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
   test "$ac_cv_c_inline" != no && break
 done
 
 fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_c_inline" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_inline" >&5
 $as_echo "$ac_cv_c_inline" >&6; }
 
-
 case $ac_cv_c_inline in
   inline | yes) ;;
   *)
@@ -21295,16 +15312,12 @@
     ;;
 esac
 
-{ $as_echo "$as_me:$LINENO: checking for working volatile" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for working volatile" >&5
 $as_echo_n "checking for working volatile... " >&6; }
-if test "${ac_cv_c_volatile+set}" = set; then
+if test "${ac_cv_c_volatile+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 
 int
@@ -21318,54 +15331,27 @@
   return 0;
 }
 _ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_compile") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest.$ac_objext; then
+if ac_fn_c_try_compile "$LINENO"; then :
   ac_cv_c_volatile=yes
 else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-	ac_cv_c_volatile=no
+  ac_cv_c_volatile=no
 fi
-
 rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
 fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_c_volatile" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_volatile" >&5
 $as_echo "$ac_cv_c_volatile" >&6; }
 if test $ac_cv_c_volatile = no; then
 
-cat >>confdefs.h <<\_ACEOF
-#define volatile /**/
-_ACEOF
+$as_echo "#define volatile /**/" >>confdefs.h
 
 fi
 
-{ $as_echo "$as_me:$LINENO: checking for stdbool.h that conforms to C99" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for stdbool.h that conforms to C99" >&5
 $as_echo_n "checking for stdbool.h that conforms to C99... " >&6; }
-if test "${ac_cv_header_stdbool_h+set}" = set; then
+if test "${ac_cv_header_stdbool_h+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 
 #include <stdbool.h>
@@ -21445,131 +15431,17 @@
   return 0;
 }
 _ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_compile") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest.$ac_objext; then
+if ac_fn_c_try_compile "$LINENO"; then :
   ac_cv_header_stdbool_h=yes
 else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-	ac_cv_header_stdbool_h=no
+  ac_cv_header_stdbool_h=no
 fi
-
 rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
 fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_header_stdbool_h" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_stdbool_h" >&5
 $as_echo "$ac_cv_header_stdbool_h" >&6; }
-{ $as_echo "$as_me:$LINENO: checking for _Bool" >&5
-$as_echo_n "checking for _Bool... " >&6; }
-if test "${ac_cv_type__Bool+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
-  ac_cv_type__Bool=no
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-$ac_includes_default
-int
-main ()
-{
-if (sizeof (_Bool))
-       return 0;
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_compile") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest.$ac_objext; then
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-$ac_includes_default
-int
-main ()
-{
-if (sizeof ((_Bool)))
-	  return 0;
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_compile") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest.$ac_objext; then
-  :
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-	ac_cv_type__Bool=yes
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_type__Bool" >&5
-$as_echo "$ac_cv_type__Bool" >&6; }
-if test "x$ac_cv_type__Bool" = x""yes; then
+ac_fn_c_check_type "$LINENO" "_Bool" "ac_cv_type__Bool" "$ac_includes_default"
+if test "x$ac_cv_type__Bool" = x""yes; then :
 
 cat >>confdefs.h <<_ACEOF
 #define HAVE__BOOL 1
@@ -21580,108 +15452,13 @@
 
 if test $ac_cv_header_stdbool_h = yes; then
 
-cat >>confdefs.h <<\_ACEOF
-#define HAVE_STDBOOL_H 1
-_ACEOF
-
-fi
-
-{ $as_echo "$as_me:$LINENO: checking for size_t" >&5
-$as_echo_n "checking for size_t... " >&6; }
-if test "${ac_cv_type_size_t+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
-  ac_cv_type_size_t=no
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-$ac_includes_default
-int
-main ()
-{
-if (sizeof (size_t))
-       return 0;
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_compile") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest.$ac_objext; then
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-$ac_includes_default
-int
-main ()
-{
-if (sizeof ((size_t)))
-	  return 0;
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_compile") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest.$ac_objext; then
-  :
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
+$as_echo "#define HAVE_STDBOOL_H 1" >>confdefs.h
 
-	ac_cv_type_size_t=yes
 fi
 
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-
-fi
+ac_fn_c_check_type "$LINENO" "size_t" "ac_cv_type_size_t" "$ac_includes_default"
+if test "x$ac_cv_type_size_t" = x""yes; then :
 
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_type_size_t" >&5
-$as_echo "$ac_cv_type_size_t" >&6; }
-if test "x$ac_cv_type_size_t" = x""yes; then
-  :
 else
 
 cat >>confdefs.h <<_ACEOF
@@ -21691,16 +15468,16 @@
 fi
 
 
-{ $as_echo "$as_me:$LINENO: checking if demos should be built" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if demos should be built" >&5
 $as_echo_n "checking if demos should be built... " >&6; }
 # Check whether --enable-demos was given.
-if test "${enable_demos+set}" = set; then
+if test "${enable_demos+set}" = set; then :
   enableval=$enable_demos; enable_demos=$enableval
 else
   enable_demos=yes
 fi
 
-{ $as_echo "$as_me:$LINENO: result: $enable_demos" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_demos" >&5
 $as_echo "$enable_demos" >&6; }
 
 
@@ -21711,18 +15488,14 @@
   i586 | i686 | i786 )
         pentium=yes
 
-cat >>confdefs.h <<\_ACEOF
-#define PENTIUM 1
-_ACEOF
+$as_echo "#define PENTIUM 1" >>confdefs.h
 
     ;;
   x86_64* )
         pentium=yes
         cpu64=yes
 
-cat >>confdefs.h <<\_ACEOF
-#define X86_64_SYSTEM 1
-_ACEOF
+$as_echo "#define X86_64_SYSTEM 1" >>confdefs.h
 
     ;;
 esac
@@ -21741,159 +15514,12 @@
 
 
 
-
-
-
-
-
-
-
-
-
-
-
-for ac_header in alloca.h stdio.h stdint.h stdlib.h math.h string.h stdarg.h malloc.h float.h time.h sys/time.h
-do
-as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
-  { $as_echo "$as_me:$LINENO: checking for $ac_header" >&5
-$as_echo_n "checking for $ac_header... " >&6; }
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
-  $as_echo_n "(cached) " >&6
-fi
-ac_res=`eval 'as_val=${'$as_ac_Header'}
-		 $as_echo "$as_val"'`
-	       { $as_echo "$as_me:$LINENO: result: $ac_res" >&5
-$as_echo "$ac_res" >&6; }
-else
-  # Is the header compilable?
-{ $as_echo "$as_me:$LINENO: checking $ac_header usability" >&5
-$as_echo_n "checking $ac_header usability... " >&6; }
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-$ac_includes_default
-#include <$ac_header>
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_compile") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest.$ac_objext; then
-  ac_header_compiler=yes
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-	ac_header_compiler=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-{ $as_echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
-$as_echo "$ac_header_compiler" >&6; }
-
-# Is the header present?
-{ $as_echo "$as_me:$LINENO: checking $ac_header presence" >&5
-$as_echo_n "checking $ac_header presence... " >&6; }
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-#include <$ac_header>
-_ACEOF
-if { (ac_try="$ac_cpp conftest.$ac_ext"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } >/dev/null && {
-	 test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       }; then
-  ac_header_preproc=yes
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-  ac_header_preproc=no
-fi
-
-rm -f conftest.err conftest.$ac_ext
-{ $as_echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
-$as_echo "$ac_header_preproc" >&6; }
-
-# So?  What about this header?
-case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in
-  yes:no: )
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
-$as_echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5
-$as_echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;}
-    ac_header_preproc=yes
-    ;;
-  no:yes:* )
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5
-$as_echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header:     check for missing prerequisite headers?" >&5
-$as_echo "$as_me: WARNING: $ac_header:     check for missing prerequisite headers?" >&2;}
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5
-$as_echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;}
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header:     section \"Present But Cannot Be Compiled\"" >&5
-$as_echo "$as_me: WARNING: $ac_header:     section \"Present But Cannot Be Compiled\"" >&2;}
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
-$as_echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5
-$as_echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;}
-    ( cat <<\_ASBOX
-## -------------------------- ##
-## Report this to ode@ode.org ##
-## -------------------------- ##
-_ASBOX
-     ) | sed "s/^/$as_me: WARNING:     /" >&2
-    ;;
-esac
-{ $as_echo "$as_me:$LINENO: checking for $ac_header" >&5
-$as_echo_n "checking for $ac_header... " >&6; }
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
-  $as_echo_n "(cached) " >&6
-else
-  eval "$as_ac_Header=\$ac_header_preproc"
-fi
-ac_res=`eval 'as_val=${'$as_ac_Header'}
-		 $as_echo "$as_val"'`
-	       { $as_echo "$as_me:$LINENO: result: $ac_res" >&5
-$as_echo "$ac_res" >&6; }
-
-fi
-as_val=`eval 'as_val=${'$as_ac_Header'}
-		 $as_echo "$as_val"'`
-   if test "x$as_val" = x""yes; then
+for ac_header in alloca.h stdio.h stdint.h stdlib.h math.h string.h stdarg.h malloc.h float.h time.h sys/time.h
+do :
+  as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
+ac_fn_c_check_header_mongrel "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default"
+eval as_val=\$$as_ac_Header
+   if test "x$as_val" = x""yes; then :
   cat >>confdefs.h <<_ACEOF
 #define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
 _ACEOF
@@ -21908,7 +15534,7 @@
 gimpact=no
 
 # Check whether --with-trimesh was given.
-if test "${with_trimesh+set}" = set; then
+if test "${with_trimesh+set}" = set; then :
   withval=$with_trimesh; trimesh=$withval
 else
   trimesh=opcode
@@ -21950,16 +15576,16 @@
 
 
 
-{ $as_echo "$as_me:$LINENO: checking if double precision is requested" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if double precision is requested" >&5
 $as_echo_n "checking if double precision is requested... " >&6; }
 # Check whether --enable-double-precision was given.
-if test "${enable_double_precision+set}" = set; then
+if test "${enable_double_precision+set}" = set; then :
   enableval=$enable_double_precision; precision=$enableval
 else
   precision=no
 fi
 
-{ $as_echo "$as_me:$LINENO: result: $precision" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $precision" >&5
 $as_echo "$precision" >&6; }
 if test "$precision" = yes;
 then
@@ -21974,7 +15600,7 @@
 
 
 # Check whether --with-drawstuff was given.
-if test "${with_drawstuff+set}" = set; then
+if test "${with_drawstuff+set}" = set; then :
   withval=$with_drawstuff; drawstuff=$withval
 else
   drawstuff=
@@ -22040,19 +15666,19 @@
   OSX_FALSE=
 fi
 
-{ $as_echo "$as_me:$LINENO: checking which drawstuff lib to build" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking which drawstuff lib to build" >&5
 $as_echo_n "checking which drawstuff lib to build... " >&6; }
-{ $as_echo "$as_me:$LINENO: result: $drawstuff" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $drawstuff" >&5
 $as_echo "$drawstuff" >&6; }
 
 if test "x$drawstuff" = "xX11"
 then
-    { $as_echo "$as_me:$LINENO: checking for X" >&5
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for X" >&5
 $as_echo_n "checking for X... " >&6; }
 
 
 # Check whether --with-x was given.
-if test "${with_x+set}" = set; then
+if test "${with_x+set}" = set; then :
   withval=$with_x;
 fi
 
@@ -22062,10 +15688,8 @@
   have_x=disabled
 else
   case $x_includes,$x_libraries in #(
-    *\'*) { { $as_echo "$as_me:$LINENO: error: cannot use X directory names containing '" >&5
-$as_echo "$as_me: error: cannot use X directory names containing '" >&2;}
-   { (exit 1); exit 1; }; };; #(
-    *,NONE | NONE,*) if test "${ac_cv_have_x+set}" = set; then
+    *\'*) as_fn_error "cannot use X directory names containing '" "$LINENO" 5;; #(
+    *,NONE | NONE,*) if test "${ac_cv_have_x+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
   # One or both of the vars are not set, and there is no cached value.
@@ -22113,21 +15737,25 @@
 # Check X11 before X11Rn because it is often a symlink to the current release.
 ac_x_header_dirs='
 /usr/X11/include
+/usr/X11R7/include
 /usr/X11R6/include
 /usr/X11R5/include
 /usr/X11R4/include
 
 /usr/include/X11
+/usr/include/X11R7
 /usr/include/X11R6
 /usr/include/X11R5
 /usr/include/X11R4
 
 /usr/local/X11/include
+/usr/local/X11R7/include
 /usr/local/X11R6/include
 /usr/local/X11R5/include
 /usr/local/X11R4/include
 
 /usr/local/include/X11
+/usr/local/include/X11R7
 /usr/local/include/X11R6
 /usr/local/include/X11R5
 /usr/local/include/X11R4
@@ -22149,37 +15777,14 @@
 if test "$ac_x_includes" = no; then
   # Guess where to find include files, by looking for Xlib.h.
   # First, try using that file with no special directory specified.
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 #include <X11/Xlib.h>
 _ACEOF
-if { (ac_try="$ac_cpp conftest.$ac_ext"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } >/dev/null && {
-	 test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       }; then
+if ac_fn_c_try_cpp "$LINENO"; then :
   # We can compile using X headers with no special include directory.
 ac_x_includes=
 else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
   for ac_dir in $ac_x_header_dirs; do
   if test -r "$ac_dir/X11/Xlib.h"; then
     ac_x_includes=$ac_dir
@@ -22187,7 +15792,6 @@
   fi
 done
 fi
-
 rm -f conftest.err conftest.$ac_ext
 fi # $ac_x_includes = no
 
@@ -22197,11 +15801,7 @@
   # Don't add to $LIBS permanently.
   ac_save_LIBS=$LIBS
   LIBS="-lX11 $LIBS"
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 #include <X11/Xlib.h>
 int
@@ -22212,35 +15812,12 @@
   return 0;
 }
 _ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_link") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest$ac_exeext && {
-	 test "$cross_compiling" = yes ||
-	 $as_test_x conftest$ac_exeext
-       }; then
+if ac_fn_c_try_link "$LINENO"; then :
   LIBS=$ac_save_LIBS
 # We can link X programs with no special library path.
 ac_x_libraries=
 else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-	LIBS=$ac_save_LIBS
+  LIBS=$ac_save_LIBS
 for ac_dir in `$as_echo "$ac_x_includes $ac_x_header_dirs" | sed s/include/lib/g`
 do
   # Don't even attempt the hair of trying to link an X program!
@@ -22252,10 +15829,8 @@
   done
 done
 fi
-
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-      conftest$ac_exeext conftest.$ac_ext
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
 fi # $ac_x_libraries = no
 
 case $ac_x_includes,$ac_x_libraries in #(
@@ -22276,7 +15851,7 @@
 fi # $with_x != no
 
 if test "$have_x" != yes; then
-  { $as_echo "$as_me:$LINENO: result: $have_x" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $have_x" >&5
 $as_echo "$have_x" >&6; }
   no_x=yes
 else
@@ -22287,16 +15862,14 @@
   ac_cv_have_x="have_x=yes\
 	ac_x_includes='$x_includes'\
 	ac_x_libraries='$x_libraries'"
-  { $as_echo "$as_me:$LINENO: result: libraries $x_libraries, headers $x_includes" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: libraries $x_libraries, headers $x_includes" >&5
 $as_echo "libraries $x_libraries, headers $x_includes" >&6; }
 fi
 
 if test "$no_x" = yes; then
   # Not all programs may use this symbol, but it does not hurt to define it.
 
-cat >>confdefs.h <<\_ACEOF
-#define X_DISPLAY_MISSING 1
-_ACEOF
+$as_echo "#define X_DISPLAY_MISSING 1" >>confdefs.h
 
   X_CFLAGS= X_PRE_LIBS= X_LIBS= X_EXTRA_LIBS=
 else
@@ -22309,16 +15882,12 @@
     X_LIBS="$X_LIBS -L$x_libraries"
     # For Solaris; some versions of Sun CC require a space after -R and
     # others require no space.  Words are not sufficient . . . .
-    { $as_echo "$as_me:$LINENO: checking whether -R must be followed by a space" >&5
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether -R must be followed by a space" >&5
 $as_echo_n "checking whether -R must be followed by a space... " >&6; }
     ac_xsave_LIBS=$LIBS; LIBS="$LIBS -R$x_libraries"
     ac_xsave_c_werror_flag=$ac_c_werror_flag
     ac_c_werror_flag=yes
-    cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+    cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 
 int
@@ -22329,40 +15898,13 @@
   return 0;
 }
 _ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_link") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest$ac_exeext && {
-	 test "$cross_compiling" = yes ||
-	 $as_test_x conftest$ac_exeext
-       }; then
-  { $as_echo "$as_me:$LINENO: result: no" >&5
+if ac_fn_c_try_link "$LINENO"; then :
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
 $as_echo "no" >&6; }
        X_LIBS="$X_LIBS -R$x_libraries"
 else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-	LIBS="$ac_xsave_LIBS -R $x_libraries"
-       cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+  LIBS="$ac_xsave_LIBS -R $x_libraries"
+       cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 
 int
@@ -22373,46 +15915,19 @@
   return 0;
 }
 _ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_link") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest$ac_exeext && {
-	 test "$cross_compiling" = yes ||
-	 $as_test_x conftest$ac_exeext
-       }; then
-  { $as_echo "$as_me:$LINENO: result: yes" >&5
+if ac_fn_c_try_link "$LINENO"; then :
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
 $as_echo "yes" >&6; }
 	  X_LIBS="$X_LIBS -R $x_libraries"
 else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-	{ $as_echo "$as_me:$LINENO: result: neither works" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: neither works" >&5
 $as_echo "neither works" >&6; }
 fi
-
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-      conftest$ac_exeext conftest.$ac_ext
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
 fi
-
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-      conftest$ac_exeext conftest.$ac_ext
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
     ac_c_werror_flag=$ac_xsave_c_werror_flag
     LIBS=$ac_xsave_LIBS
   fi
@@ -22428,11 +15943,7 @@
     # libraries were built with DECnet support.  And Karl Berry says
     # the Alpha needs dnet_stub (dnet does not exist).
     ac_xsave_LIBS="$LIBS"; LIBS="$LIBS $X_LIBS -lX11"
-    cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+    cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 
 /* Override any GCC internal prototype to avoid an error.
@@ -22450,44 +15961,17 @@
   return 0;
 }
 _ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_link") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest$ac_exeext && {
-	 test "$cross_compiling" = yes ||
-	 $as_test_x conftest$ac_exeext
-       }; then
-  :
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
+if ac_fn_c_try_link "$LINENO"; then :
 
-	{ $as_echo "$as_me:$LINENO: checking for dnet_ntoa in -ldnet" >&5
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dnet_ntoa in -ldnet" >&5
 $as_echo_n "checking for dnet_ntoa in -ldnet... " >&6; }
-if test "${ac_cv_lib_dnet_dnet_ntoa+set}" = set; then
+if test "${ac_cv_lib_dnet_dnet_ntoa+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
   ac_check_lib_save_LIBS=$LIBS
 LIBS="-ldnet  $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 
 /* Override any GCC internal prototype to avoid an error.
@@ -22505,59 +15989,30 @@
   return 0;
 }
 _ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_link") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest$ac_exeext && {
-	 test "$cross_compiling" = yes ||
-	 $as_test_x conftest$ac_exeext
-       }; then
+if ac_fn_c_try_link "$LINENO"; then :
   ac_cv_lib_dnet_dnet_ntoa=yes
 else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-	ac_cv_lib_dnet_dnet_ntoa=no
+  ac_cv_lib_dnet_dnet_ntoa=no
 fi
-
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-      conftest$ac_exeext conftest.$ac_ext
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
 LIBS=$ac_check_lib_save_LIBS
 fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_dnet_dnet_ntoa" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dnet_dnet_ntoa" >&5
 $as_echo "$ac_cv_lib_dnet_dnet_ntoa" >&6; }
-if test "x$ac_cv_lib_dnet_dnet_ntoa" = x""yes; then
+if test "x$ac_cv_lib_dnet_dnet_ntoa" = x""yes; then :
   X_EXTRA_LIBS="$X_EXTRA_LIBS -ldnet"
 fi
 
     if test $ac_cv_lib_dnet_dnet_ntoa = no; then
-      { $as_echo "$as_me:$LINENO: checking for dnet_ntoa in -ldnet_stub" >&5
+      { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dnet_ntoa in -ldnet_stub" >&5
 $as_echo_n "checking for dnet_ntoa in -ldnet_stub... " >&6; }
-if test "${ac_cv_lib_dnet_stub_dnet_ntoa+set}" = set; then
+if test "${ac_cv_lib_dnet_stub_dnet_ntoa+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
   ac_check_lib_save_LIBS=$LIBS
 LIBS="-ldnet_stub  $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 
 /* Override any GCC internal prototype to avoid an error.
@@ -22575,52 +16030,25 @@
   return 0;
 }
 _ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_link") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest$ac_exeext && {
-	 test "$cross_compiling" = yes ||
-	 $as_test_x conftest$ac_exeext
-       }; then
+if ac_fn_c_try_link "$LINENO"; then :
   ac_cv_lib_dnet_stub_dnet_ntoa=yes
 else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-	ac_cv_lib_dnet_stub_dnet_ntoa=no
+  ac_cv_lib_dnet_stub_dnet_ntoa=no
 fi
-
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-      conftest$ac_exeext conftest.$ac_ext
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
 LIBS=$ac_check_lib_save_LIBS
 fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_dnet_stub_dnet_ntoa" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dnet_stub_dnet_ntoa" >&5
 $as_echo "$ac_cv_lib_dnet_stub_dnet_ntoa" >&6; }
-if test "x$ac_cv_lib_dnet_stub_dnet_ntoa" = x""yes; then
+if test "x$ac_cv_lib_dnet_stub_dnet_ntoa" = x""yes; then :
   X_EXTRA_LIBS="$X_EXTRA_LIBS -ldnet_stub"
 fi
 
     fi
 fi
-
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-      conftest$ac_exeext conftest.$ac_ext
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
     LIBS="$ac_xsave_LIBS"
 
     # msh@cis.ufl.edu says -lnsl (and -lsocket) are needed for his 386/AT,
@@ -22631,105 +16059,20 @@
     # on Irix 5.2, according to T.E. Dickey.
     # The functions gethostbyname, getservbyname, and inet_addr are
     # in -lbsd on LynxOS 3.0.1/i386, according to Lars Hecking.
-    { $as_echo "$as_me:$LINENO: checking for gethostbyname" >&5
-$as_echo_n "checking for gethostbyname... " >&6; }
-if test "${ac_cv_func_gethostbyname+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-/* Define gethostbyname to an innocuous variant, in case <limits.h> declares gethostbyname.
-   For example, HP-UX 11i <limits.h> declares gettimeofday.  */
-#define gethostbyname innocuous_gethostbyname
-
-/* System header to define __stub macros and hopefully few prototypes,
-    which can conflict with char gethostbyname (); below.
-    Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-    <limits.h> exists even on freestanding compilers.  */
-
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
-
-#undef gethostbyname
-
-/* Override any GCC internal prototype to avoid an error.
-   Use char because int might match the return type of a GCC
-   builtin and then its argument prototype would still apply.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-char gethostbyname ();
-/* The GNU C library defines this for functions which it implements
-    to always fail with ENOSYS.  Some functions are actually named
-    something starting with __ and the normal name is an alias.  */
-#if defined __stub_gethostbyname || defined __stub___gethostbyname
-choke me
-#endif
-
-int
-main ()
-{
-return gethostbyname ();
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_link") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest$ac_exeext && {
-	 test "$cross_compiling" = yes ||
-	 $as_test_x conftest$ac_exeext
-       }; then
-  ac_cv_func_gethostbyname=yes
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-	ac_cv_func_gethostbyname=no
-fi
+    ac_fn_c_check_func "$LINENO" "gethostbyname" "ac_cv_func_gethostbyname"
+if test "x$ac_cv_func_gethostbyname" = x""yes; then :
 
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-      conftest$ac_exeext conftest.$ac_ext
 fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_func_gethostbyname" >&5
-$as_echo "$ac_cv_func_gethostbyname" >&6; }
 
     if test $ac_cv_func_gethostbyname = no; then
-      { $as_echo "$as_me:$LINENO: checking for gethostbyname in -lnsl" >&5
+      { $as_echo "$as_me:${as_lineno-$LINENO}: checking for gethostbyname in -lnsl" >&5
 $as_echo_n "checking for gethostbyname in -lnsl... " >&6; }
-if test "${ac_cv_lib_nsl_gethostbyname+set}" = set; then
+if test "${ac_cv_lib_nsl_gethostbyname+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
   ac_check_lib_save_LIBS=$LIBS
 LIBS="-lnsl  $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 
 /* Override any GCC internal prototype to avoid an error.
@@ -22747,59 +16090,30 @@
   return 0;
 }
 _ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_link") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest$ac_exeext && {
-	 test "$cross_compiling" = yes ||
-	 $as_test_x conftest$ac_exeext
-       }; then
+if ac_fn_c_try_link "$LINENO"; then :
   ac_cv_lib_nsl_gethostbyname=yes
 else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-	ac_cv_lib_nsl_gethostbyname=no
+  ac_cv_lib_nsl_gethostbyname=no
 fi
-
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-      conftest$ac_exeext conftest.$ac_ext
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
 LIBS=$ac_check_lib_save_LIBS
 fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_nsl_gethostbyname" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_nsl_gethostbyname" >&5
 $as_echo "$ac_cv_lib_nsl_gethostbyname" >&6; }
-if test "x$ac_cv_lib_nsl_gethostbyname" = x""yes; then
+if test "x$ac_cv_lib_nsl_gethostbyname" = x""yes; then :
   X_EXTRA_LIBS="$X_EXTRA_LIBS -lnsl"
 fi
 
       if test $ac_cv_lib_nsl_gethostbyname = no; then
-	{ $as_echo "$as_me:$LINENO: checking for gethostbyname in -lbsd" >&5
+	{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for gethostbyname in -lbsd" >&5
 $as_echo_n "checking for gethostbyname in -lbsd... " >&6; }
-if test "${ac_cv_lib_bsd_gethostbyname+set}" = set; then
+if test "${ac_cv_lib_bsd_gethostbyname+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
   ac_check_lib_save_LIBS=$LIBS
 LIBS="-lbsd  $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 
 /* Override any GCC internal prototype to avoid an error.
@@ -22817,43 +16131,18 @@
   return 0;
 }
 _ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_link") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest$ac_exeext && {
-	 test "$cross_compiling" = yes ||
-	 $as_test_x conftest$ac_exeext
-       }; then
+if ac_fn_c_try_link "$LINENO"; then :
   ac_cv_lib_bsd_gethostbyname=yes
 else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-	ac_cv_lib_bsd_gethostbyname=no
+  ac_cv_lib_bsd_gethostbyname=no
 fi
-
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-      conftest$ac_exeext conftest.$ac_ext
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
 LIBS=$ac_check_lib_save_LIBS
 fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_bsd_gethostbyname" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_bsd_gethostbyname" >&5
 $as_echo "$ac_cv_lib_bsd_gethostbyname" >&6; }
-if test "x$ac_cv_lib_bsd_gethostbyname" = x""yes; then
+if test "x$ac_cv_lib_bsd_gethostbyname" = x""yes; then :
   X_EXTRA_LIBS="$X_EXTRA_LIBS -lbsd"
 fi
 
@@ -22865,107 +16154,22 @@
     # 2.0.  But -lsocket is broken on IRIX 5.2 (and is not necessary
     # on later versions), says Simon Leinen: it contains gethostby*
     # variants that don't use the name server (or something).  -lsocket
-    # must be given before -lnsl if both are needed.  We assume that
-    # if connect needs -lnsl, so does gethostbyname.
-    { $as_echo "$as_me:$LINENO: checking for connect" >&5
-$as_echo_n "checking for connect... " >&6; }
-if test "${ac_cv_func_connect+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-/* Define connect to an innocuous variant, in case <limits.h> declares connect.
-   For example, HP-UX 11i <limits.h> declares gettimeofday.  */
-#define connect innocuous_connect
-
-/* System header to define __stub macros and hopefully few prototypes,
-    which can conflict with char connect (); below.
-    Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-    <limits.h> exists even on freestanding compilers.  */
-
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
-
-#undef connect
-
-/* Override any GCC internal prototype to avoid an error.
-   Use char because int might match the return type of a GCC
-   builtin and then its argument prototype would still apply.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-char connect ();
-/* The GNU C library defines this for functions which it implements
-    to always fail with ENOSYS.  Some functions are actually named
-    something starting with __ and the normal name is an alias.  */
-#if defined __stub_connect || defined __stub___connect
-choke me
-#endif
-
-int
-main ()
-{
-return connect ();
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_link") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest$ac_exeext && {
-	 test "$cross_compiling" = yes ||
-	 $as_test_x conftest$ac_exeext
-       }; then
-  ac_cv_func_connect=yes
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-	ac_cv_func_connect=no
-fi
+    # must be given before -lnsl if both are needed.  We assume that
+    # if connect needs -lnsl, so does gethostbyname.
+    ac_fn_c_check_func "$LINENO" "connect" "ac_cv_func_connect"
+if test "x$ac_cv_func_connect" = x""yes; then :
 
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-      conftest$ac_exeext conftest.$ac_ext
 fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_func_connect" >&5
-$as_echo "$ac_cv_func_connect" >&6; }
 
     if test $ac_cv_func_connect = no; then
-      { $as_echo "$as_me:$LINENO: checking for connect in -lsocket" >&5
+      { $as_echo "$as_me:${as_lineno-$LINENO}: checking for connect in -lsocket" >&5
 $as_echo_n "checking for connect in -lsocket... " >&6; }
-if test "${ac_cv_lib_socket_connect+set}" = set; then
+if test "${ac_cv_lib_socket_connect+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
   ac_check_lib_save_LIBS=$LIBS
 LIBS="-lsocket $X_EXTRA_LIBS $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 
 /* Override any GCC internal prototype to avoid an error.
@@ -22983,76 +16187,39 @@
   return 0;
 }
 _ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_link") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest$ac_exeext && {
-	 test "$cross_compiling" = yes ||
-	 $as_test_x conftest$ac_exeext
-       }; then
+if ac_fn_c_try_link "$LINENO"; then :
   ac_cv_lib_socket_connect=yes
 else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-	ac_cv_lib_socket_connect=no
+  ac_cv_lib_socket_connect=no
 fi
-
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-      conftest$ac_exeext conftest.$ac_ext
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
 LIBS=$ac_check_lib_save_LIBS
 fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_socket_connect" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_socket_connect" >&5
 $as_echo "$ac_cv_lib_socket_connect" >&6; }
-if test "x$ac_cv_lib_socket_connect" = x""yes; then
+if test "x$ac_cv_lib_socket_connect" = x""yes; then :
   X_EXTRA_LIBS="-lsocket $X_EXTRA_LIBS"
 fi
 
     fi
 
     # Guillermo Gomez says -lposix is necessary on A/UX.
-    { $as_echo "$as_me:$LINENO: checking for remove" >&5
-$as_echo_n "checking for remove... " >&6; }
-if test "${ac_cv_func_remove+set}" = set; then
+    ac_fn_c_check_func "$LINENO" "remove" "ac_cv_func_remove"
+if test "x$ac_cv_func_remove" = x""yes; then :
+
+fi
+
+    if test $ac_cv_func_remove = no; then
+      { $as_echo "$as_me:${as_lineno-$LINENO}: checking for remove in -lposix" >&5
+$as_echo_n "checking for remove in -lposix... " >&6; }
+if test "${ac_cv_lib_posix_remove+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-lposix  $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
-/* Define remove to an innocuous variant, in case <limits.h> declares remove.
-   For example, HP-UX 11i <limits.h> declares gettimeofday.  */
-#define remove innocuous_remove
-
-/* System header to define __stub macros and hopefully few prototypes,
-    which can conflict with char remove (); below.
-    Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-    <limits.h> exists even on freestanding compilers.  */
-
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
-
-#undef remove
 
 /* Override any GCC internal prototype to avoid an error.
    Use char because int might match the return type of a GCC
@@ -23061,13 +16228,6 @@
 extern "C"
 #endif
 char remove ();
-/* The GNU C library defines this for functions which it implements
-    to always fail with ENOSYS.  Some functions are actually named
-    something starting with __ and the normal name is an alias.  */
-#if defined __stub_remove || defined __stub___remove
-choke me
-#endif
-
 int
 main ()
 {
@@ -23076,55 +16236,90 @@
   return 0;
 }
 _ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_link") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest$ac_exeext && {
-	 test "$cross_compiling" = yes ||
-	 $as_test_x conftest$ac_exeext
-       }; then
-  ac_cv_func_remove=yes
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_lib_posix_remove=yes
 else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-	ac_cv_func_remove=no
+  ac_cv_lib_posix_remove=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_posix_remove" >&5
+$as_echo "$ac_cv_lib_posix_remove" >&6; }
+if test "x$ac_cv_lib_posix_remove" = x""yes; then :
+  X_EXTRA_LIBS="$X_EXTRA_LIBS -lposix"
 fi
 
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-      conftest$ac_exeext conftest.$ac_ext
+    fi
+
+    # BSDI BSD/OS 2.1 needs -lipc for XOpenDisplay.
+    ac_fn_c_check_func "$LINENO" "shmat" "ac_cv_func_shmat"
+if test "x$ac_cv_func_shmat" = x""yes; then :
+
 fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_func_remove" >&5
-$as_echo "$ac_cv_func_remove" >&6; }
 
-    if test $ac_cv_func_remove = no; then
-      { $as_echo "$as_me:$LINENO: checking for remove in -lposix" >&5
-$as_echo_n "checking for remove in -lposix... " >&6; }
-if test "${ac_cv_lib_posix_remove+set}" = set; then
+    if test $ac_cv_func_shmat = no; then
+      { $as_echo "$as_me:${as_lineno-$LINENO}: checking for shmat in -lipc" >&5
+$as_echo_n "checking for shmat in -lipc... " >&6; }
+if test "${ac_cv_lib_ipc_shmat+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
   ac_check_lib_save_LIBS=$LIBS
-LIBS="-lposix  $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
+LIBS="-lipc  $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char shmat ();
+int
+main ()
+{
+return shmat ();
+  ;
+  return 0;
+}
 _ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_lib_ipc_shmat=yes
+else
+  ac_cv_lib_ipc_shmat=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_ipc_shmat" >&5
+$as_echo "$ac_cv_lib_ipc_shmat" >&6; }
+if test "x$ac_cv_lib_ipc_shmat" = x""yes; then :
+  X_EXTRA_LIBS="$X_EXTRA_LIBS -lipc"
+fi
+
+    fi
+  fi
+
+  # Check for libraries that X11R6 Xt/Xaw programs need.
+  ac_save_LDFLAGS=$LDFLAGS
+  test -n "$x_libraries" && LDFLAGS="$LDFLAGS -L$x_libraries"
+  # SM needs ICE to (dynamically) link under SunOS 4.x (so we have to
+  # check for ICE first), but we must link in the order -lSM -lICE or
+  # we get undefined symbols.  So assume we have SM if we have ICE.
+  # These have to be linked with before -lX11, unlike the other
+  # libraries we check for below, so use a different variable.
+  # John Interrante, Karl Berry
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for IceConnectionNumber in -lICE" >&5
+$as_echo_n "checking for IceConnectionNumber in -lICE... " >&6; }
+if test "${ac_cv_lib_ICE_IceConnectionNumber+set}" = set; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-lICE $X_EXTRA_LIBS $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 
 /* Override any GCC internal prototype to avoid an error.
@@ -23133,400 +16328,342 @@
 #ifdef __cplusplus
 extern "C"
 #endif
-char remove ();
+char IceConnectionNumber ();
 int
 main ()
 {
-return remove ();
+return IceConnectionNumber ();
   ;
   return 0;
 }
 _ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_link") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest$ac_exeext && {
-	 test "$cross_compiling" = yes ||
-	 $as_test_x conftest$ac_exeext
-       }; then
-  ac_cv_lib_posix_remove=yes
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_lib_ICE_IceConnectionNumber=yes
 else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
+  ac_cv_lib_ICE_IceConnectionNumber=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_ICE_IceConnectionNumber" >&5
+$as_echo "$ac_cv_lib_ICE_IceConnectionNumber" >&6; }
+if test "x$ac_cv_lib_ICE_IceConnectionNumber" = x""yes; then :
+  X_PRE_LIBS="$X_PRE_LIBS -lSM -lICE"
+fi
+
+  LDFLAGS=$ac_save_LDFLAGS
 
-	ac_cv_lib_posix_remove=no
 fi
 
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-      conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
 fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_posix_remove" >&5
-$as_echo "$ac_cv_lib_posix_remove" >&6; }
-if test "x$ac_cv_lib_posix_remove" = x""yes; then
-  X_EXTRA_LIBS="$X_EXTRA_LIBS -lposix"
+
+if test "x$drawstuff" = "xOSX"; then
+
+$as_echo "#define HAVE_APPLE_OPENGL_FRAMEWORK 1" >>confdefs.h
+
+  GL_LIBS="-framework OpenGL -framework Carbon -framework AGL"
+else
+  have_gl_headers=yes
+  for ac_header in GL/gl.h GL/glu.h GL/glext.h
+do :
+  as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
+ac_fn_c_check_header_compile "$LINENO" "$ac_header" "$as_ac_Header" "#ifdef WIN32
+         #include <windows.h>
+         #endif
+         #if HAVE_GL_GL_H
+         #include <GL/gl.h>
+         #endif
+  	     #if HAVE_GL_GLU_H
+         #include <GL/glu.h>
+         #endif
+
+"
+eval as_val=\$$as_ac_Header
+   if test "x$as_val" = x""yes; then :
+  cat >>confdefs.h <<_ACEOF
+#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
+_ACEOF
+
+else
+  have_gl_headers=no
 fi
 
-    fi
+done
 
-    # BSDI BSD/OS 2.1 needs -lipc for XOpenDisplay.
-    { $as_echo "$as_me:$LINENO: checking for shmat" >&5
-$as_echo_n "checking for shmat... " >&6; }
-if test "${ac_cv_func_shmat+set}" = set; then
+  have_gl=no
+  have_glu=no
+  TEMP_LDFLAGS="$LDFLAGS"
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for main in -lGL" >&5
+$as_echo_n "checking for main in -lGL... " >&6; }
+if test "${ac_cv_lib_GL_main+set}" = set; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-lGL  $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+
+int
+main ()
+{
+return main ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_lib_GL_main=yes
+else
+  ac_cv_lib_GL_main=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_GL_main" >&5
+$as_echo "$ac_cv_lib_GL_main" >&6; }
+if test "x$ac_cv_lib_GL_main" = x""yes; then :
+  GL_LIBS="-lGL"; have_gl=yes
+fi
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for main in -lGLU" >&5
+$as_echo_n "checking for main in -lGLU... " >&6; }
+if test "${ac_cv_lib_GLU_main+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-lGLU -lGL $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+
+int
+main ()
+{
+return main ();
+  ;
+  return 0;
+}
 _ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_lib_GLU_main=yes
+else
+  ac_cv_lib_GLU_main=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_GLU_main" >&5
+$as_echo "$ac_cv_lib_GLU_main" >&6; }
+if test "x$ac_cv_lib_GLU_main" = x""yes; then :
+  GL_LIBS="-lGLU $GL_LIBS"; have_glu=yes
+fi
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for main in -lopengl32" >&5
+$as_echo_n "checking for main in -lopengl32... " >&6; }
+if test "${ac_cv_lib_opengl32_main+set}" = set; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-lopengl32  $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
-/* Define shmat to an innocuous variant, in case <limits.h> declares shmat.
-   For example, HP-UX 11i <limits.h> declares gettimeofday.  */
-#define shmat innocuous_shmat
 
-/* System header to define __stub macros and hopefully few prototypes,
-    which can conflict with char shmat (); below.
-    Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-    <limits.h> exists even on freestanding compilers.  */
 
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
+int
+main ()
+{
+return main ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_lib_opengl32_main=yes
+else
+  ac_cv_lib_opengl32_main=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_opengl32_main" >&5
+$as_echo "$ac_cv_lib_opengl32_main" >&6; }
+if test "x$ac_cv_lib_opengl32_main" = x""yes; then :
+  GL_LIBS="-lopengl32"; have_gl=yes
+fi
 
-#undef shmat
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for main in -lglu32" >&5
+$as_echo_n "checking for main in -lglu32... " >&6; }
+if test "${ac_cv_lib_glu32_main+set}" = set; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-lglu32 -lopengl32 $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
 
-/* Override any GCC internal prototype to avoid an error.
-   Use char because int might match the return type of a GCC
-   builtin and then its argument prototype would still apply.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-char shmat ();
-/* The GNU C library defines this for functions which it implements
-    to always fail with ENOSYS.  Some functions are actually named
-    something starting with __ and the normal name is an alias.  */
-#if defined __stub_shmat || defined __stub___shmat
-choke me
-#endif
 
 int
 main ()
 {
-return shmat ();
+return main ();
   ;
   return 0;
 }
 _ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_link") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest$ac_exeext && {
-	 test "$cross_compiling" = yes ||
-	 $as_test_x conftest$ac_exeext
-       }; then
-  ac_cv_func_shmat=yes
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_lib_glu32_main=yes
 else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-	ac_cv_func_shmat=no
+  ac_cv_lib_glu32_main=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_glu32_main" >&5
+$as_echo "$ac_cv_lib_glu32_main" >&6; }
+if test "x$ac_cv_lib_glu32_main" = x""yes; then :
+  GL_LIBS="-lglu32 $GL_LIBS"; have_glu=yes
 fi
 
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-      conftest$ac_exeext conftest.$ac_ext
+  LDFLAGS="$TEMP_LDFLAGS"
+  if test $have_gl = no -o $have_glu = no -o $have_gl_headers = no; then
+    if test x$enable_demos = xyes; then
+      { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Demos will not be built because OpenGL doesn't seem to work. See \`config.log' for details." >&5
+$as_echo "$as_me: WARNING: Demos will not be built because OpenGL doesn't seem to work. See \`config.log' for details." >&2;}
+    fi
+    enable_demos=no
+  fi
 fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_func_shmat" >&5
-$as_echo "$ac_cv_func_shmat" >&6; }
 
-    if test $ac_cv_func_shmat = no; then
-      { $as_echo "$as_me:$LINENO: checking for shmat in -lipc" >&5
-$as_echo_n "checking for shmat in -lipc... " >&6; }
-if test "${ac_cv_lib_ipc_shmat+set}" = set; then
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for main in -lstdc++" >&5
+$as_echo_n "checking for main in -lstdc++... " >&6; }
+if test "${ac_cv_lib_stdcpp_main+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
   ac_check_lib_save_LIBS=$LIBS
-LIBS="-lipc  $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+LIBS="-lstdc++  $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 
-/* Override any GCC internal prototype to avoid an error.
-   Use char because int might match the return type of a GCC
-   builtin and then its argument prototype would still apply.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-char shmat ();
+
 int
 main ()
 {
-return shmat ();
+return main ();
   ;
   return 0;
 }
 _ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_link") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest$ac_exeext && {
-	 test "$cross_compiling" = yes ||
-	 $as_test_x conftest$ac_exeext
-       }; then
-  ac_cv_lib_ipc_shmat=yes
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_lib_stdcpp_main=yes
 else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-	ac_cv_lib_ipc_shmat=no
+  ac_cv_lib_stdcpp_main=no
 fi
-
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-      conftest$ac_exeext conftest.$ac_ext
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
 LIBS=$ac_check_lib_save_LIBS
 fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_ipc_shmat" >&5
-$as_echo "$ac_cv_lib_ipc_shmat" >&6; }
-if test "x$ac_cv_lib_ipc_shmat" = x""yes; then
-  X_EXTRA_LIBS="$X_EXTRA_LIBS -lipc"
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_stdcpp_main" >&5
+$as_echo "$ac_cv_lib_stdcpp_main" >&6; }
+if test "x$ac_cv_lib_stdcpp_main" = x""yes; then :
+  LIBSTDCXX="-lstdc++"
+else
+  LIBSTDCXX=
 fi
 
-    fi
-  fi
 
-  # Check for libraries that X11R6 Xt/Xaw programs need.
-  ac_save_LDFLAGS=$LDFLAGS
-  test -n "$x_libraries" && LDFLAGS="$LDFLAGS -L$x_libraries"
-  # SM needs ICE to (dynamically) link under SunOS 4.x (so we have to
-  # check for ICE first), but we must link in the order -lSM -lICE or
-  # we get undefined symbols.  So assume we have SM if we have ICE.
-  # These have to be linked with before -lX11, unlike the other
-  # libraries we check for below, so use a different variable.
-  # John Interrante, Karl Berry
-  { $as_echo "$as_me:$LINENO: checking for IceConnectionNumber in -lICE" >&5
-$as_echo_n "checking for IceConnectionNumber in -lICE... " >&6; }
-if test "${ac_cv_lib_ICE_IceConnectionNumber+set}" = set; then
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for main in -lpthread" >&5
+$as_echo_n "checking for main in -lpthread... " >&6; }
+if test "${ac_cv_lib_pthread_main+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
   ac_check_lib_save_LIBS=$LIBS
-LIBS="-lICE $X_EXTRA_LIBS $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+LIBS="-lpthread  $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 
-/* Override any GCC internal prototype to avoid an error.
-   Use char because int might match the return type of a GCC
-   builtin and then its argument prototype would still apply.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-char IceConnectionNumber ();
+
 int
 main ()
 {
-return IceConnectionNumber ();
+return main ();
   ;
   return 0;
 }
 _ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_link") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest$ac_exeext && {
-	 test "$cross_compiling" = yes ||
-	 $as_test_x conftest$ac_exeext
-       }; then
-  ac_cv_lib_ICE_IceConnectionNumber=yes
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_lib_pthread_main=yes
 else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-	ac_cv_lib_ICE_IceConnectionNumber=no
+  ac_cv_lib_pthread_main=no
 fi
-
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-      conftest$ac_exeext conftest.$ac_ext
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
 LIBS=$ac_check_lib_save_LIBS
 fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_ICE_IceConnectionNumber" >&5
-$as_echo "$ac_cv_lib_ICE_IceConnectionNumber" >&6; }
-if test "x$ac_cv_lib_ICE_IceConnectionNumber" = x""yes; then
-  X_PRE_LIBS="$X_PRE_LIBS -lSM -lICE"
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_pthread_main" >&5
+$as_echo "$ac_cv_lib_pthread_main" >&6; }
+if test "x$ac_cv_lib_pthread_main" = x""yes; then :
+  LIBS="$LIBS -lpthread"
 fi
 
-  LDFLAGS=$ac_save_LDFLAGS
 
-fi
 
+ if test x$enable_demos = xyes; then
+  ENABLE_DEMOS_TRUE=
+  ENABLE_DEMOS_FALSE='#'
+else
+  ENABLE_DEMOS_TRUE='#'
+  ENABLE_DEMOS_FALSE=
 fi
 
-if test "x$drawstuff" = "xOSX"; then
-
-cat >>confdefs.h <<\_ACEOF
-#define HAVE_APPLE_OPENGL_FRAMEWORK 1
-_ACEOF
 
-  GL_LIBS="-framework OpenGL -framework Carbon -framework AGL"
-else
-  have_gl_headers=yes
 
+new_trimesh=no
+# Check whether --enable-new-trimesh was given.
+if test "${enable_new_trimesh+set}" = set; then :
+  enableval=$enable_new_trimesh; new_trimesh=$enableval
 
+fi
 
-for ac_header in GL/gl.h GL/glu.h GL/glext.h
-do
-as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
-{ $as_echo "$as_me:$LINENO: checking for $ac_header" >&5
-$as_echo_n "checking for $ac_header... " >&6; }
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
-  $as_echo_n "(cached) " >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-#ifdef WIN32
-         #include <windows.h>
-         #endif
-         #if HAVE_GL_GL_H
-         #include <GL/gl.h>
-         #endif
-  	     #if HAVE_GL_GLU_H
-         #include <GL/glu.h>
-         #endif
+if test x$new_trimesh = xyes -a $trimesh = opcode; then
 
+$as_echo "#define dTRIMESH_OPCODE_USE_NEW_TRIMESH_TRIMESH_COLLIDER 1" >>confdefs.h
 
-#include <$ac_header>
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_compile") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest.$ac_objext; then
-  eval "$as_ac_Header=yes"
 else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-	eval "$as_ac_Header=no"
+        new_trimesh=no
 fi
 
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-ac_res=`eval 'as_val=${'$as_ac_Header'}
-		 $as_echo "$as_val"'`
-	       { $as_echo "$as_me:$LINENO: result: $ac_res" >&5
-$as_echo "$ac_res" >&6; }
-as_val=`eval 'as_val=${'$as_ac_Header'}
-		 $as_echo "$as_val"'`
-   if test "x$as_val" = x""yes; then
-  cat >>confdefs.h <<_ACEOF
-#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
-_ACEOF
 
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for gprof" >&5
+$as_echo_n "checking for gprof... " >&6; }
+# Check whether --enable-gprof was given.
+if test "${enable_gprof+set}" = set; then :
+  enableval=$enable_gprof; gprof=$enableval
 else
-  have_gl_headers=no
+  gprof=no
 fi
 
-done
-
-  have_gl=no
-  have_glu=no
-  TEMP_LDFLAGS="$LDFLAGS"
-  { $as_echo "$as_me:$LINENO: checking for main in -lGL" >&5
-$as_echo_n "checking for main in -lGL... " >&6; }
-if test "${ac_cv_lib_GL_main+set}" = set; then
+if test "$gprof" != no
+then
+    CFLAGS="-pg $CFLAGS"
+    CXXFLAGS="-pg $CXXFLAGS"
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: enabled" >&5
+$as_echo "enabled" >&6; }
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for main in -lgmon" >&5
+$as_echo_n "checking for main in -lgmon... " >&6; }
+if test "${ac_cv_lib_gmon_main+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
   ac_check_lib_save_LIBS=$LIBS
-LIBS="-lGL  $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+LIBS="-lgmon  $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 
 
@@ -23538,58 +16675,34 @@
   return 0;
 }
 _ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_link") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest$ac_exeext && {
-	 test "$cross_compiling" = yes ||
-	 $as_test_x conftest$ac_exeext
-       }; then
-  ac_cv_lib_GL_main=yes
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_lib_gmon_main=yes
 else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-	ac_cv_lib_GL_main=no
+  ac_cv_lib_gmon_main=no
 fi
-
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-      conftest$ac_exeext conftest.$ac_ext
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
 LIBS=$ac_check_lib_save_LIBS
 fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_GL_main" >&5
-$as_echo "$ac_cv_lib_GL_main" >&6; }
-if test "x$ac_cv_lib_GL_main" = x""yes; then
-  GL_LIBS="-lGL"; have_gl=yes
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_gmon_main" >&5
+$as_echo "$ac_cv_lib_gmon_main" >&6; }
+if test "x$ac_cv_lib_gmon_main" = x""yes; then :
+  LIBS="$LIBS -lgmon"
 fi
 
-  { $as_echo "$as_me:$LINENO: checking for main in -lGLU" >&5
-$as_echo_n "checking for main in -lGLU... " >&6; }
-if test "${ac_cv_lib_GLU_main+set}" = set; then
+else
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for main in -lm" >&5
+$as_echo_n "checking for main in -lm... " >&6; }
+if test "${ac_cv_lib_m_main+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
   ac_check_lib_save_LIBS=$LIBS
-LIBS="-lGLU -lGL $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+LIBS="-lm  $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 
 
@@ -23601,58 +16714,34 @@
   return 0;
 }
 _ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_link") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest$ac_exeext && {
-	 test "$cross_compiling" = yes ||
-	 $as_test_x conftest$ac_exeext
-       }; then
-  ac_cv_lib_GLU_main=yes
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_lib_m_main=yes
 else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-	ac_cv_lib_GLU_main=no
+  ac_cv_lib_m_main=no
 fi
-
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-      conftest$ac_exeext conftest.$ac_ext
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
 LIBS=$ac_check_lib_save_LIBS
 fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_GLU_main" >&5
-$as_echo "$ac_cv_lib_GLU_main" >&6; }
-if test "x$ac_cv_lib_GLU_main" = x""yes; then
-  GL_LIBS="-lGLU $GL_LIBS"; have_glu=yes
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_m_main" >&5
+$as_echo "$ac_cv_lib_m_main" >&6; }
+if test "x$ac_cv_lib_m_main" = x""yes; then :
+  cat >>confdefs.h <<_ACEOF
+#define HAVE_LIBM 1
+_ACEOF
+
+  LIBS="-lm $LIBS"
+
 fi
 
-  { $as_echo "$as_me:$LINENO: checking for main in -lopengl32" >&5
-$as_echo_n "checking for main in -lopengl32... " >&6; }
-if test "${ac_cv_lib_opengl32_main+set}" = set; then
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for main in -lsunmath" >&5
+$as_echo_n "checking for main in -lsunmath... " >&6; }
+if test "${ac_cv_lib_sunmath_main+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
   ac_check_lib_save_LIBS=$LIBS
-LIBS="-lopengl32  $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+LIBS="-lsunmath  $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 
 
@@ -23664,3918 +16753,3274 @@
   return 0;
 }
 _ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_link") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest$ac_exeext && {
-	 test "$cross_compiling" = yes ||
-	 $as_test_x conftest$ac_exeext
-       }; then
-  ac_cv_lib_opengl32_main=yes
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_lib_sunmath_main=yes
 else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-	ac_cv_lib_opengl32_main=no
+  ac_cv_lib_sunmath_main=no
 fi
-
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-      conftest$ac_exeext conftest.$ac_ext
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
 LIBS=$ac_check_lib_save_LIBS
 fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_opengl32_main" >&5
-$as_echo "$ac_cv_lib_opengl32_main" >&6; }
-if test "x$ac_cv_lib_opengl32_main" = x""yes; then
-  GL_LIBS="-lopengl32"; have_gl=yes
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_sunmath_main" >&5
+$as_echo "$ac_cv_lib_sunmath_main" >&6; }
+if test "x$ac_cv_lib_sunmath_main" = x""yes; then :
+  cat >>confdefs.h <<_ACEOF
+#define HAVE_LIBSUNMATH 1
+_ACEOF
+
+  LIBS="-lsunmath $LIBS"
+
 fi
 
-  { $as_echo "$as_me:$LINENO: checking for main in -lglu32" >&5
-$as_echo_n "checking for main in -lglu32... " >&6; }
-if test "${ac_cv_lib_glu32_main+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
-  ac_check_lib_save_LIBS=$LIBS
-LIBS="-lglu32 -lopengl32 $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
+for ac_func in floor memmove memset select sqrt sqrtf sinf cosf fabsf atan2f fmodf copysignf copysign snprintf vsnprintf gettimeofday isnan isnanf _isnan _isnanf __isnan __isnanf
+do :
+  as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh`
+ac_fn_c_check_func "$LINENO" "$ac_func" "$as_ac_var"
+eval as_val=\$$as_ac_var
+   if test "x$as_val" = x""yes; then :
+  cat >>confdefs.h <<_ACEOF
+#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1
 _ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
 
+fi
+done
 
+# The Ultrix 4.2 mips builtin alloca declared by alloca.h only works
+# for constant arguments.  Useless!
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for working alloca.h" >&5
+$as_echo_n "checking for working alloca.h... " >&6; }
+if test "${ac_cv_working_alloca_h+set}" = set; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <alloca.h>
 int
 main ()
 {
-return main ();
+char *p = (char *) alloca (2 * sizeof (int));
+			  if (p) return 0;
   ;
   return 0;
 }
 _ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_link") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest$ac_exeext && {
-	 test "$cross_compiling" = yes ||
-	 $as_test_x conftest$ac_exeext
-       }; then
-  ac_cv_lib_glu32_main=yes
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_working_alloca_h=yes
 else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-	ac_cv_lib_glu32_main=no
-fi
-
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-      conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_glu32_main" >&5
-$as_echo "$ac_cv_lib_glu32_main" >&6; }
-if test "x$ac_cv_lib_glu32_main" = x""yes; then
-  GL_LIBS="-lglu32 $GL_LIBS"; have_glu=yes
+  ac_cv_working_alloca_h=no
 fi
-
-  LDFLAGS="$TEMP_LDFLAGS"
-  if test $have_gl = no -o $have_glu = no -o $have_gl_headers = no; then
-    if test x$enable_demos = xyes; then
-      { $as_echo "$as_me:$LINENO: WARNING: Demos will not be built because OpenGL doesn't seem to work. See \`config.log' for details." >&5
-$as_echo "$as_me: WARNING: Demos will not be built because OpenGL doesn't seem to work. See \`config.log' for details." >&2;}
-    fi
-    enable_demos=no
-  fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
 fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_working_alloca_h" >&5
+$as_echo "$ac_cv_working_alloca_h" >&6; }
+if test $ac_cv_working_alloca_h = yes; then
 
+$as_echo "#define HAVE_ALLOCA_H 1" >>confdefs.h
 
+fi
 
-{ $as_echo "$as_me:$LINENO: checking for main in -lstdc++" >&5
-$as_echo_n "checking for main in -lstdc++... " >&6; }
-if test "${ac_cv_lib_stdcpp_main+set}" = set; then
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for alloca" >&5
+$as_echo_n "checking for alloca... " >&6; }
+if test "${ac_cv_func_alloca_works+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
-  ac_check_lib_save_LIBS=$LIBS
-LIBS="-lstdc++  $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
-
+#ifdef __GNUC__
+# define alloca __builtin_alloca
+#else
+# ifdef _MSC_VER
+#  include <malloc.h>
+#  define alloca _alloca
+# else
+#  ifdef HAVE_ALLOCA_H
+#   include <alloca.h>
+#  else
+#   ifdef _AIX
+ #pragma alloca
+#   else
+#    ifndef alloca /* predefined by HP cc +Olibcalls */
+char *alloca ();
+#    endif
+#   endif
+#  endif
+# endif
+#endif
 
 int
 main ()
 {
-return main ();
+char *p = (char *) alloca (1);
+				    if (p) return 0;
   ;
   return 0;
 }
 _ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_link") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest$ac_exeext && {
-	 test "$cross_compiling" = yes ||
-	 $as_test_x conftest$ac_exeext
-       }; then
-  ac_cv_lib_stdcpp_main=yes
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_func_alloca_works=yes
 else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
+  ac_cv_func_alloca_works=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_func_alloca_works" >&5
+$as_echo "$ac_cv_func_alloca_works" >&6; }
+
+if test $ac_cv_func_alloca_works = yes; then
+
+$as_echo "#define HAVE_ALLOCA 1" >>confdefs.h
+
+else
+  # The SVR3 libPW and SVR4 libucb both contain incompatible functions
+# that cause trouble.  Some versions do not even contain alloca or
+# contain a buggy version.  If you still want to use their alloca,
+# use ar to extract alloca.o from them instead of compiling alloca.c.
+
+ALLOCA=\${LIBOBJDIR}alloca.$ac_objext
+
+$as_echo "#define C_ALLOCA 1" >>confdefs.h
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether \`alloca.c' needs Cray hooks" >&5
+$as_echo_n "checking whether \`alloca.c' needs Cray hooks... " >&6; }
+if test "${ac_cv_os_cray+set}" = set; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#if defined CRAY && ! defined CRAY2
+webecray
+#else
+wenotbecray
+#endif
 
-	ac_cv_lib_stdcpp_main=no
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+  $EGREP "webecray" >/dev/null 2>&1; then :
+  ac_cv_os_cray=yes
+else
+  ac_cv_os_cray=no
 fi
+rm -f conftest*
 
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-      conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
 fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_stdcpp_main" >&5
-$as_echo "$ac_cv_lib_stdcpp_main" >&6; }
-if test "x$ac_cv_lib_stdcpp_main" = x""yes; then
-  LIBSTDCXX="-lstdc++"
-else
-  LIBSTDCXX=
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_os_cray" >&5
+$as_echo "$ac_cv_os_cray" >&6; }
+if test $ac_cv_os_cray = yes; then
+  for ac_func in _getb67 GETB67 getb67; do
+    as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh`
+ac_fn_c_check_func "$LINENO" "$ac_func" "$as_ac_var"
+eval as_val=\$$as_ac_var
+   if test "x$as_val" = x""yes; then :
+
+cat >>confdefs.h <<_ACEOF
+#define CRAY_STACKSEG_END $ac_func
+_ACEOF
+
+    break
 fi
 
+  done
+fi
 
-{ $as_echo "$as_me:$LINENO: checking for main in -lpthread" >&5
-$as_echo_n "checking for main in -lpthread... " >&6; }
-if test "${ac_cv_lib_pthread_main+set}" = set; then
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking stack direction for C alloca" >&5
+$as_echo_n "checking stack direction for C alloca... " >&6; }
+if test "${ac_cv_c_stack_direction+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
-  ac_check_lib_save_LIBS=$LIBS
-LIBS="-lpthread  $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+  if test "$cross_compiling" = yes; then :
+  ac_cv_c_stack_direction=0
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
-
+$ac_includes_default
+int
+find_stack_direction ()
+{
+  static char *addr = 0;
+  auto char dummy;
+  if (addr == 0)
+    {
+      addr = &dummy;
+      return find_stack_direction ();
+    }
+  else
+    return (&dummy > addr) ? 1 : -1;
+}
 
 int
 main ()
 {
-return main ();
-  ;
-  return 0;
+  return find_stack_direction () < 0;
 }
 _ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_link") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest$ac_exeext && {
-	 test "$cross_compiling" = yes ||
-	 $as_test_x conftest$ac_exeext
-       }; then
-  ac_cv_lib_pthread_main=yes
+if ac_fn_c_try_run "$LINENO"; then :
+  ac_cv_c_stack_direction=1
 else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
+  ac_cv_c_stack_direction=-1
+fi
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
+  conftest.$ac_objext conftest.beam conftest.$ac_ext
+fi
 
-	ac_cv_lib_pthread_main=no
 fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_stack_direction" >&5
+$as_echo "$ac_cv_c_stack_direction" >&6; }
+cat >>confdefs.h <<_ACEOF
+#define STACK_DIRECTION $ac_cv_c_stack_direction
+_ACEOF
+
 
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-      conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
 fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_pthread_main" >&5
-$as_echo "$ac_cv_lib_pthread_main" >&6; }
-if test "x$ac_cv_lib_pthread_main" = x""yes; then
-  LIBS="$LIBS -lpthread"
+
+for ac_header in stdlib.h
+do :
+  ac_fn_c_check_header_mongrel "$LINENO" "stdlib.h" "ac_cv_header_stdlib_h" "$ac_includes_default"
+if test "x$ac_cv_header_stdlib_h" = x""yes; then :
+  cat >>confdefs.h <<_ACEOF
+#define HAVE_STDLIB_H 1
+_ACEOF
+
 fi
 
+done
 
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU libc compatible malloc" >&5
+$as_echo_n "checking for GNU libc compatible malloc... " >&6; }
+if test "${ac_cv_func_malloc_0_nonnull+set}" = set; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test "$cross_compiling" = yes; then :
+  ac_cv_func_malloc_0_nonnull=no
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#if defined STDC_HEADERS || defined HAVE_STDLIB_H
+# include <stdlib.h>
+#else
+char *malloc ();
+#endif
 
- if test x$enable_demos = xyes; then
-  ENABLE_DEMOS_TRUE=
-  ENABLE_DEMOS_FALSE='#'
+int
+main ()
+{
+return ! malloc (0);
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_run "$LINENO"; then :
+  ac_cv_func_malloc_0_nonnull=yes
 else
-  ENABLE_DEMOS_TRUE='#'
-  ENABLE_DEMOS_FALSE=
+  ac_cv_func_malloc_0_nonnull=no
+fi
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
+  conftest.$ac_objext conftest.beam conftest.$ac_ext
 fi
 
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_func_malloc_0_nonnull" >&5
+$as_echo "$ac_cv_func_malloc_0_nonnull" >&6; }
+if test $ac_cv_func_malloc_0_nonnull = yes; then :
 
+$as_echo "#define HAVE_MALLOC 1" >>confdefs.h
 
-new_trimesh=no
-# Check whether --enable-new-trimesh was given.
-if test "${enable_new_trimesh+set}" = set; then
-  enableval=$enable_new_trimesh; new_trimesh=$enableval
+else
+  $as_echo "#define HAVE_MALLOC 0" >>confdefs.h
 
-fi
+   case " $LIBOBJS " in
+  *" malloc.$ac_objext "* ) ;;
+  *) LIBOBJS="$LIBOBJS malloc.$ac_objext"
+ ;;
+esac
 
-if test x$new_trimesh = xyes -a $trimesh = opcode; then
 
-cat >>confdefs.h <<\_ACEOF
-#define dTRIMESH_OPCODE_USE_NEW_TRIMESH_TRIMESH_COLLIDER 1
-_ACEOF
+$as_echo "#define malloc rpl_malloc" >>confdefs.h
 
-else
-        new_trimesh=no
 fi
 
 
-{ $as_echo "$as_me:$LINENO: checking for gprof" >&5
-$as_echo_n "checking for gprof... " >&6; }
-# Check whether --enable-gprof was given.
-if test "${enable_gprof+set}" = set; then
-  enableval=$enable_gprof; gprof=$enableval
-else
-  gprof=no
-fi
-
-if test "$gprof" != no
-then
-    CFLAGS="-pg $CFLAGS"
-    CXXFLAGS="-pg $CXXFLAGS"
-    { $as_echo "$as_me:$LINENO: result: enabled" >&5
-$as_echo "enabled" >&6; }
-    { $as_echo "$as_me:$LINENO: checking for main in -lgmon" >&5
-$as_echo_n "checking for main in -lgmon... " >&6; }
-if test "${ac_cv_lib_gmon_main+set}" = set; then
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for obstacks" >&5
+$as_echo_n "checking for obstacks... " >&6; }
+if test "${ac_cv_func_obstack+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
-  ac_check_lib_save_LIBS=$LIBS
-LIBS="-lgmon  $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
-
-
+$ac_includes_default
+		      #include "obstack.h"
 int
 main ()
 {
-return main ();
+struct obstack mem;
+		       #define obstack_chunk_alloc malloc
+		       #define obstack_chunk_free free
+		       obstack_init (&mem);
+		       obstack_free (&mem, 0);
   ;
   return 0;
 }
 _ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_link") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest$ac_exeext && {
-	 test "$cross_compiling" = yes ||
-	 $as_test_x conftest$ac_exeext
-       }; then
-  ac_cv_lib_gmon_main=yes
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_func_obstack=yes
 else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-	ac_cv_lib_gmon_main=no
-fi
-
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-      conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
+  ac_cv_func_obstack=no
 fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_gmon_main" >&5
-$as_echo "$ac_cv_lib_gmon_main" >&6; }
-if test "x$ac_cv_lib_gmon_main" = x""yes; then
-  LIBS="$LIBS -lgmon"
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
 fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_func_obstack" >&5
+$as_echo "$ac_cv_func_obstack" >&6; }
+if test $ac_cv_func_obstack = yes; then
+
+$as_echo "#define HAVE_OBSTACK 1" >>confdefs.h
 
 else
-    { $as_echo "$as_me:$LINENO: result: no" >&5
-$as_echo "no" >&6; }
+  case " $LIBOBJS " in
+  *" obstack.$ac_objext "* ) ;;
+  *) LIBOBJS="$LIBOBJS obstack.$ac_objext"
+ ;;
+esac
+
 fi
 
+for ac_header in stdlib.h
+do :
+  ac_fn_c_check_header_mongrel "$LINENO" "stdlib.h" "ac_cv_header_stdlib_h" "$ac_includes_default"
+if test "x$ac_cv_header_stdlib_h" = x""yes; then :
+  cat >>confdefs.h <<_ACEOF
+#define HAVE_STDLIB_H 1
+_ACEOF
+
+fi
 
-{ $as_echo "$as_me:$LINENO: checking for main in -lm" >&5
-$as_echo_n "checking for main in -lm... " >&6; }
-if test "${ac_cv_lib_m_main+set}" = set; then
+done
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU libc compatible realloc" >&5
+$as_echo_n "checking for GNU libc compatible realloc... " >&6; }
+if test "${ac_cv_func_realloc_0_nonnull+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
-  ac_check_lib_save_LIBS=$LIBS
-LIBS="-lm  $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+  if test "$cross_compiling" = yes; then :
+  ac_cv_func_realloc_0_nonnull=no
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
-
+#if defined STDC_HEADERS || defined HAVE_STDLIB_H
+# include <stdlib.h>
+#else
+char *realloc ();
+#endif
 
 int
 main ()
 {
-return main ();
+return ! realloc (0, 0);
   ;
   return 0;
 }
 _ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_link") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest$ac_exeext && {
-	 test "$cross_compiling" = yes ||
-	 $as_test_x conftest$ac_exeext
-       }; then
-  ac_cv_lib_m_main=yes
+if ac_fn_c_try_run "$LINENO"; then :
+  ac_cv_func_realloc_0_nonnull=yes
 else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
+  ac_cv_func_realloc_0_nonnull=no
+fi
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
+  conftest.$ac_objext conftest.beam conftest.$ac_ext
+fi
 
-	ac_cv_lib_m_main=no
 fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_func_realloc_0_nonnull" >&5
+$as_echo "$ac_cv_func_realloc_0_nonnull" >&6; }
+if test $ac_cv_func_realloc_0_nonnull = yes; then :
+
+$as_echo "#define HAVE_REALLOC 1" >>confdefs.h
+
+else
+  $as_echo "#define HAVE_REALLOC 0" >>confdefs.h
+
+   case " $LIBOBJS " in
+  *" realloc.$ac_objext "* ) ;;
+  *) LIBOBJS="$LIBOBJS realloc.$ac_objext"
+ ;;
+esac
+
+
+$as_echo "#define realloc rpl_realloc" >>confdefs.h
 
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-      conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
 fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_m_main" >&5
-$as_echo "$ac_cv_lib_m_main" >&6; }
-if test "x$ac_cv_lib_m_main" = x""yes; then
+
+
+for ac_header in sys/select.h sys/socket.h
+do :
+  as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
+ac_fn_c_check_header_mongrel "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default"
+eval as_val=\$$as_ac_Header
+   if test "x$as_val" = x""yes; then :
   cat >>confdefs.h <<_ACEOF
-#define HAVE_LIBM 1
+#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
 _ACEOF
 
-  LIBS="-lm $LIBS"
-
 fi
 
+done
 
-{ $as_echo "$as_me:$LINENO: checking for main in -lsunmath" >&5
-$as_echo_n "checking for main in -lsunmath... " >&6; }
-if test "${ac_cv_lib_sunmath_main+set}" = set; then
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking types of arguments for select" >&5
+$as_echo_n "checking types of arguments for select... " >&6; }
+if test "${ac_cv_func_select_args+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
-  ac_check_lib_save_LIBS=$LIBS
-LIBS="-lsunmath  $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+  for ac_arg234 in 'fd_set *' 'int *' 'void *'; do
+ for ac_arg1 in 'int' 'size_t' 'unsigned long int' 'unsigned int'; do
+  for ac_arg5 in 'struct timeval *' 'const struct timeval *'; do
+   cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
-
+$ac_includes_default
+#ifdef HAVE_SYS_SELECT_H
+# include <sys/select.h>
+#endif
+#ifdef HAVE_SYS_SOCKET_H
+# include <sys/socket.h>
+#endif
 
 int
 main ()
 {
-return main ();
+extern int select ($ac_arg1,
+					    $ac_arg234, $ac_arg234, $ac_arg234,
+					    $ac_arg5);
   ;
   return 0;
 }
 _ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_link") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest$ac_exeext && {
-	 test "$cross_compiling" = yes ||
-	 $as_test_x conftest$ac_exeext
-       }; then
-  ac_cv_lib_sunmath_main=yes
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-	ac_cv_lib_sunmath_main=no
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_cv_func_select_args="$ac_arg1,$ac_arg234,$ac_arg5"; break 3
 fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+  done
+ done
+done
+# Provide a safe default value.
+: ${ac_cv_func_select_args='int,int *,struct timeval *'}
 
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-      conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
 fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_sunmath_main" >&5
-$as_echo "$ac_cv_lib_sunmath_main" >&6; }
-if test "x$ac_cv_lib_sunmath_main" = x""yes; then
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_func_select_args" >&5
+$as_echo "$ac_cv_func_select_args" >&6; }
+ac_save_IFS=$IFS; IFS=','
+set dummy `echo "$ac_cv_func_select_args" | sed 's/\*/\*/g'`
+IFS=$ac_save_IFS
+shift
+
+cat >>confdefs.h <<_ACEOF
+#define SELECT_TYPE_ARG1 $1
+_ACEOF
+
+
+cat >>confdefs.h <<_ACEOF
+#define SELECT_TYPE_ARG234 ($2)
+_ACEOF
+
+
+cat >>confdefs.h <<_ACEOF
+#define SELECT_TYPE_ARG5 ($3)
+_ACEOF
+
+rm -f conftest*
+
+for ac_func in vprintf
+do :
+  ac_fn_c_check_func "$LINENO" "vprintf" "ac_cv_func_vprintf"
+if test "x$ac_cv_func_vprintf" = x""yes; then :
   cat >>confdefs.h <<_ACEOF
-#define HAVE_LIBSUNMATH 1
+#define HAVE_VPRINTF 1
 _ACEOF
 
-  LIBS="-lsunmath $LIBS"
+ac_fn_c_check_func "$LINENO" "_doprnt" "ac_cv_func__doprnt"
+if test "x$ac_cv_func__doprnt" = x""yes; then :
+
+$as_echo "#define HAVE_DOPRNT 1" >>confdefs.h
 
 fi
 
+fi
+done
 
 
 
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if alloca should be emulated by malloc" >&5
+$as_echo_n "checking if alloca should be emulated by malloc... " >&6; }
+# Check whether --enable-malloc was given.
+if test "${enable_malloc+set}" = set; then :
+  enableval=$enable_malloc; usemalloc=$enableval
+else
+  usemalloc=no
+fi
 
+if test "$usemalloc" != no
+then
 
+$as_echo "#define dUSE_MALLOC_FOR_ALLOCA 1" >>confdefs.h
 
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: $usemalloc" >&5
+$as_echo "$usemalloc" >&6; }
+else
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
 
+# Check whether --enable-ou was given.
+if test "${enable_ou+set}" = set; then :
+  enableval=$enable_ou; use_ou=$enableval
+else
+  use_ou=no
+fi
 
+if test x$use_ou = xyes
+then
+    OU_NAMESPACE=odeou
 
 
+$as_echo "#define _OU_NAMESPACE odeou" >>confdefs.h
 
 
+$as_echo "#define dOU_ENABLED 1" >>confdefs.h
 
 
+$as_echo "#define dATOMICS_ENABLED 1" >>confdefs.h
 
 
+$as_echo "#define dTLS_ENABLED 1" >>confdefs.h
 
 
+    case "$host_os" in
+      cygwin* | mingw*)
+        targetos=_OU_TARGET_OS_WINDOWS
+        ;;
+      *qnx*)
+        targetos=_OU_TARGET_OS_QNX
+        ;;
+      *apple* | *darwin*)
+        targetos=_OU_TARGET_OS_MAC
+        ;;
+      *sunos*)
+        targetos=_OU_TARGET_OS_SUNOS
+        ;;
+      *aix*)
+        targetos=_OU_TARGET_OS_AIX
+        ;;
+      *)
+        targetos=_OU_TARGET_OS_GENUNIX
+        ;;
+    esac
 
+    if test $targetos = _OU_TARGET_OS_MAC
+    then
+        MAC_OS_X_VERSION=1000
+        ac_fn_c_check_func "$LINENO" "OSAtomicAdd32Barrier" "ac_cv_func_OSAtomicAdd32Barrier"
+if test "x$ac_cv_func_OSAtomicAdd32Barrier" = x""yes; then :
+  MAC_OS_X_VERSION=1040
+fi
 
+        ac_fn_c_check_func "$LINENO" "OSAtomicAnd32OrigBarrier" "ac_cv_func_OSAtomicAnd32OrigBarrier"
+if test "x$ac_cv_func_OSAtomicAnd32OrigBarrier" = x""yes; then :
+  MAC_OS_X_VERSION=1050
+fi
 
 
-for ac_func in floor memmove memset select sqrt sqrtf sinf cosf fabsf atan2f fmodf copysignf copysign snprintf vsnprintf gettimeofday isnan isnanf _isnan _isnanf __isnan __isnanf
-do
-as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh`
-{ $as_echo "$as_me:$LINENO: checking for $ac_func" >&5
-$as_echo_n "checking for $ac_func... " >&6; }
-if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then
-  $as_echo_n "(cached) " >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
+cat >>confdefs.h <<_ACEOF
+#define MAC_OS_X_VERSION $MAC_OS_X_VERSION
 _ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-/* Define $ac_func to an innocuous variant, in case <limits.h> declares $ac_func.
-   For example, HP-UX 11i <limits.h> declares gettimeofday.  */
-#define $ac_func innocuous_$ac_func
 
-/* System header to define __stub macros and hopefully few prototypes,
-    which can conflict with char $ac_func (); below.
-    Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-    <limits.h> exists even on freestanding compilers.  */
-
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
-
-#undef $ac_func
+    fi
 
-/* Override any GCC internal prototype to avoid an error.
-   Use char because int might match the return type of a GCC
-   builtin and then its argument prototype would still apply.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-char $ac_func ();
-/* The GNU C library defines this for functions which it implements
-    to always fail with ENOSYS.  Some functions are actually named
-    something starting with __ and the normal name is an alias.  */
-#if defined __stub_$ac_func || defined __stub___$ac_func
-choke me
-#endif
+    if test $targetos = _OU_TARGET_OS_SUNOS
+    then
+        ac_fn_c_check_func "$LINENO" "atomic_inc_32_nv" "ac_cv_func_atomic_inc_32_nv"
+if test "x$ac_cv_func_atomic_inc_32_nv" = x""yes; then :
 
-int
-main ()
-{
-return $ac_func ();
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_link") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest$ac_exeext && {
-	 test "$cross_compiling" = yes ||
-	 $as_test_x conftest$ac_exeext
-       }; then
-  eval "$as_ac_var=yes"
 else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-	eval "$as_ac_var=no"
+  targetos=_OU_TARGET_OS_GENUNIX
 fi
 
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-      conftest$ac_exeext conftest.$ac_ext
-fi
-ac_res=`eval 'as_val=${'$as_ac_var'}
-		 $as_echo "$as_val"'`
-	       { $as_echo "$as_me:$LINENO: result: $ac_res" >&5
-$as_echo "$ac_res" >&6; }
-as_val=`eval 'as_val=${'$as_ac_var'}
-		 $as_echo "$as_val"'`
-   if test "x$as_val" = x""yes; then
-  cat >>confdefs.h <<_ACEOF
-#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1
-_ACEOF
+    fi
 
-fi
-done
 
-# The Ultrix 4.2 mips builtin alloca declared by alloca.h only works
-# for constant arguments.  Useless!
-{ $as_echo "$as_me:$LINENO: checking for working alloca.h" >&5
-$as_echo_n "checking for working alloca.h... " >&6; }
-if test "${ac_cv_working_alloca_h+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-#include <alloca.h>
-int
-main ()
-{
-char *p = (char *) alloca (2 * sizeof (int));
-			  if (p) return 0;
-  ;
-  return 0;
-}
+cat >>confdefs.h <<_ACEOF
+#define _OU_TARGET_OS $targetos
 _ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_link") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest$ac_exeext && {
-	 test "$cross_compiling" = yes ||
-	 $as_test_x conftest$ac_exeext
-       }; then
-  ac_cv_working_alloca_h=yes
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
 
-	ac_cv_working_alloca_h=no
 fi
 
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-      conftest$ac_exeext conftest.$ac_ext
-fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_working_alloca_h" >&5
-$as_echo "$ac_cv_working_alloca_h" >&6; }
-if test $ac_cv_working_alloca_h = yes; then
 
-cat >>confdefs.h <<\_ACEOF
-#define HAVE_ALLOCA_H 1
-_ACEOF
+subdirs="$subdirs ou"
 
+ if test x$use_ou = xyes; then
+  ENABLE_OU_TRUE=
+  ENABLE_OU_FALSE='#'
+else
+  ENABLE_OU_TRUE='#'
+  ENABLE_OU_FALSE=
 fi
 
-{ $as_echo "$as_me:$LINENO: checking for alloca" >&5
-$as_echo_n "checking for alloca... " >&6; }
-if test "${ac_cv_func_alloca_works+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-#ifdef __GNUC__
-# define alloca __builtin_alloca
-#else
-# ifdef _MSC_VER
-#  include <malloc.h>
-#  define alloca _alloca
-# else
-#  ifdef HAVE_ALLOCA_H
-#   include <alloca.h>
-#  else
-#   ifdef _AIX
- #pragma alloca
-#   else
-#    ifndef alloca /* predefined by HP cc +Olibcalls */
-char *alloca ();
-#    endif
-#   endif
-#  endif
-# endif
-#endif
 
-int
-main ()
-{
-char *p = (char *) alloca (1);
-				    if (p) return 0;
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_link") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest$ac_exeext && {
-	 test "$cross_compiling" = yes ||
-	 $as_test_x conftest$ac_exeext
-       }; then
-  ac_cv_func_alloca_works=yes
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
 
-	ac_cv_func_alloca_works=no
+# Check whether --enable-asserts was given.
+if test "${enable_asserts+set}" = set; then :
+  enableval=$enable_asserts; asserts=$enableval
+else
+  asserts=yes
 fi
 
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-      conftest$ac_exeext conftest.$ac_ext
+if test x$asserts = xno
+then
+    CPPFLAGS="$CPPFLAGS -DdNODEBUG"
+    if test x$use_ou = xyes
+    then
+        CPPFLAGS="$CPPFLAGS -DNDEBUG"
+    fi
 fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_func_alloca_works" >&5
-$as_echo "$ac_cv_func_alloca_works" >&6; }
 
-if test $ac_cv_func_alloca_works = yes; then
 
-cat >>confdefs.h <<\_ACEOF
-#define HAVE_ALLOCA 1
-_ACEOF
 
-else
-  # The SVR3 libPW and SVR4 libucb both contain incompatible functions
-# that cause trouble.  Some versions do not even contain alloca or
-# contain a buggy version.  If you still want to use their alloca,
-# use ar to extract alloca.o from them instead of compiling alloca.c.
 
-ALLOCA=\${LIBOBJDIR}alloca.$ac_objext
 
-cat >>confdefs.h <<\_ACEOF
-#define C_ALLOCA 1
-_ACEOF
+ac_config_files="$ac_config_files Makefile include/Makefile include/ode/Makefile include/drawstuff/Makefile ode/Makefile ode/src/Makefile ode/src/joints/Makefile drawstuff/Makefile drawstuff/src/Makefile drawstuff/dstest/Makefile ode/demo/Makefile OPCODE/Makefile OPCODE/Ice/Makefile GIMPACT/Makefile GIMPACT/include/Makefile GIMPACT/include/GIMPACT/Makefile GIMPACT/src/Makefile tests/Makefile tests/UnitTest++/Makefile tests/UnitTest++/src/Makefile tests/UnitTest++/src/Posix/Makefile tests/UnitTest++/src/Win32/Makefile ode-config ode.pc"
 
+cat >confcache <<\_ACEOF
+# This file is a shell script that caches the results of configure
+# tests run on this system so they can be shared between configure
+# scripts and configure runs, see configure's option --config-cache.
+# It is not useful on other systems.  If it contains results you don't
+# want to keep, you may remove or edit it.
+#
+# config.status only pays attention to the cache file if you give it
+# the --recheck option to rerun configure.
+#
+# `ac_cv_env_foo' variables (set or unset) will be overridden when
+# loading this file, other *unset* `ac_cv_foo' will be assigned the
+# following values.
 
-{ $as_echo "$as_me:$LINENO: checking whether \`alloca.c' needs Cray hooks" >&5
-$as_echo_n "checking whether \`alloca.c' needs Cray hooks... " >&6; }
-if test "${ac_cv_os_cray+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
 _ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-#if defined CRAY && ! defined CRAY2
-webecray
-#else
-wenotbecray
-#endif
 
-_ACEOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
-  $EGREP "webecray" >/dev/null 2>&1; then
-  ac_cv_os_cray=yes
-else
-  ac_cv_os_cray=no
+# The following way of writing the cache mishandles newlines in values,
+# but we know of no workaround that is simple, portable, and efficient.
+# So, we kill variables containing newlines.
+# Ultrix sh set writes to stderr and can't be redirected directly,
+# and sets the high bit in the cache file unless we assign to the vars.
+(
+  for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do
+    eval ac_val=\$$ac_var
+    case $ac_val in #(
+    *${as_nl}*)
+      case $ac_var in #(
+      *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5
+$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
+      esac
+      case $ac_var in #(
+      _ | IFS | as_nl) ;; #(
+      BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(
+      *) { eval $ac_var=; unset $ac_var;} ;;
+      esac ;;
+    esac
+  done
+
+  (set) 2>&1 |
+    case $as_nl`(ac_space=' '; set) 2>&1` in #(
+    *${as_nl}ac_space=\ *)
+      # `set' does not quote correctly, so add quotes: double-quote
+      # substitution turns \\\\ into \\, and sed turns \\ into \.
+      sed -n \
+	"s/'/'\\\\''/g;
+	  s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p"
+      ;; #(
+    *)
+      # `set' quotes correctly as required by POSIX, so do not add quotes.
+      sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
+      ;;
+    esac |
+    sort
+) |
+  sed '
+     /^ac_cv_env_/b end
+     t clear
+     :clear
+     s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/
+     t end
+     s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/
+     :end' >>confcache
+if diff "$cache_file" confcache >/dev/null 2>&1; then :; else
+  if test -w "$cache_file"; then
+    test "x$cache_file" != "x/dev/null" &&
+      { $as_echo "$as_me:${as_lineno-$LINENO}: updating cache $cache_file" >&5
+$as_echo "$as_me: updating cache $cache_file" >&6;}
+    cat confcache >$cache_file
+  else
+    { $as_echo "$as_me:${as_lineno-$LINENO}: not updating unwritable cache $cache_file" >&5
+$as_echo "$as_me: not updating unwritable cache $cache_file" >&6;}
+  fi
 fi
-rm -f conftest*
+rm -f confcache
 
-fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_os_cray" >&5
-$as_echo "$ac_cv_os_cray" >&6; }
-if test $ac_cv_os_cray = yes; then
-  for ac_func in _getb67 GETB67 getb67; do
-    as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh`
-{ $as_echo "$as_me:$LINENO: checking for $ac_func" >&5
-$as_echo_n "checking for $ac_func... " >&6; }
-if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then
-  $as_echo_n "(cached) " >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-/* Define $ac_func to an innocuous variant, in case <limits.h> declares $ac_func.
-   For example, HP-UX 11i <limits.h> declares gettimeofday.  */
-#define $ac_func innocuous_$ac_func
+test "x$prefix" = xNONE && prefix=$ac_default_prefix
+# Let make expand exec_prefix.
+test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
 
-/* System header to define __stub macros and hopefully few prototypes,
-    which can conflict with char $ac_func (); below.
-    Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-    <limits.h> exists even on freestanding compilers.  */
+DEFS=-DHAVE_CONFIG_H
 
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
+ac_libobjs=
+ac_ltlibobjs=
+for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue
+  # 1. Remove the extension, and $U if already installed.
+  ac_script='s/\$U\././;s/\.o$//;s/\.obj$//'
+  ac_i=`$as_echo "$ac_i" | sed "$ac_script"`
+  # 2. Prepend LIBOBJDIR.  When used with automake>=1.10 LIBOBJDIR
+  #    will be set to the directory where LIBOBJS objects are built.
+  as_fn_append ac_libobjs " \${LIBOBJDIR}$ac_i\$U.$ac_objext"
+  as_fn_append ac_ltlibobjs " \${LIBOBJDIR}$ac_i"'$U.lo'
+done
+LIBOBJS=$ac_libobjs
 
-#undef $ac_func
+LTLIBOBJS=$ac_ltlibobjs
 
-/* Override any GCC internal prototype to avoid an error.
-   Use char because int might match the return type of a GCC
-   builtin and then its argument prototype would still apply.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-char $ac_func ();
-/* The GNU C library defines this for functions which it implements
-    to always fail with ENOSYS.  Some functions are actually named
-    something starting with __ and the normal name is an alias.  */
-#if defined __stub_$ac_func || defined __stub___$ac_func
-choke me
-#endif
 
-int
-main ()
-{
-return $ac_func ();
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_link") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest$ac_exeext && {
-	 test "$cross_compiling" = yes ||
-	 $as_test_x conftest$ac_exeext
-       }; then
-  eval "$as_ac_var=yes"
+ if test -n "$EXEEXT"; then
+  am__EXEEXT_TRUE=
+  am__EXEEXT_FALSE='#'
 else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-	eval "$as_ac_var=no"
+  am__EXEEXT_TRUE='#'
+  am__EXEEXT_FALSE=
 fi
 
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-      conftest$ac_exeext conftest.$ac_ext
+if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then
+  as_fn_error "conditional \"AMDEP\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
 fi
-ac_res=`eval 'as_val=${'$as_ac_var'}
-		 $as_echo "$as_val"'`
-	       { $as_echo "$as_me:$LINENO: result: $ac_res" >&5
-$as_echo "$ac_res" >&6; }
-as_val=`eval 'as_val=${'$as_ac_var'}
-		 $as_echo "$as_val"'`
-   if test "x$as_val" = x""yes; then
-
-cat >>confdefs.h <<_ACEOF
-#define CRAY_STACKSEG_END $ac_func
-_ACEOF
-
-    break
+if test -z "${am__fastdepCXX_TRUE}" && test -z "${am__fastdepCXX_FALSE}"; then
+  as_fn_error "conditional \"am__fastdepCXX\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
 fi
-
-  done
+if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then
+  as_fn_error "conditional \"am__fastdepCC\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${am__fastdepCXX_TRUE}" && test -z "${am__fastdepCXX_FALSE}"; then
+  as_fn_error "conditional \"am__fastdepCXX\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
 fi
 
-{ $as_echo "$as_me:$LINENO: checking stack direction for C alloca" >&5
-$as_echo_n "checking stack direction for C alloca... " >&6; }
-if test "${ac_cv_c_stack_direction+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
-  if test "$cross_compiling" = yes; then
-  ac_cv_c_stack_direction=0
-else
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-$ac_includes_default
-int
-find_stack_direction ()
-{
-  static char *addr = 0;
-  auto char dummy;
-  if (addr == 0)
-    {
-      addr = &dummy;
-      return find_stack_direction ();
-    }
-  else
-    return (&dummy > addr) ? 1 : -1;
-}
-
-int
-main ()
-{
-  return find_stack_direction () < 0;
-}
-_ACEOF
-rm -f conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_link") 2>&5
-  ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
-  { (case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_try") 2>&5
-  ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_c_stack_direction=1
-else
-  $as_echo "$as_me: program exited with status $ac_status" >&5
-$as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-( exit $ac_status )
-ac_cv_c_stack_direction=-1
+if test -z "${X86_64_SYSTEM_TRUE}" && test -z "${X86_64_SYSTEM_FALSE}"; then
+  as_fn_error "conditional \"X86_64_SYSTEM\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
 fi
-rm -rf conftest.dSYM
-rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
+if test -z "${OPCODE_TRUE}" && test -z "${OPCODE_FALSE}"; then
+  as_fn_error "conditional \"OPCODE\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
 fi
-
-
+if test -z "${GIMPACT_TRUE}" && test -z "${GIMPACT_FALSE}"; then
+  as_fn_error "conditional \"GIMPACT\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
 fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_c_stack_direction" >&5
-$as_echo "$ac_cv_c_stack_direction" >&6; }
-
-cat >>confdefs.h <<_ACEOF
-#define STACK_DIRECTION $ac_cv_c_stack_direction
-_ACEOF
-
-
+if test -z "${TRIMESH_TRUE}" && test -z "${TRIMESH_FALSE}"; then
+  as_fn_error "conditional \"TRIMESH\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
 fi
-
-
-for ac_header in stdlib.h
-do
-as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
-  { $as_echo "$as_me:$LINENO: checking for $ac_header" >&5
-$as_echo_n "checking for $ac_header... " >&6; }
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
-  $as_echo_n "(cached) " >&6
+if test -z "${ENABLE_DRAWSTUFF_TRUE}" && test -z "${ENABLE_DRAWSTUFF_FALSE}"; then
+  as_fn_error "conditional \"ENABLE_DRAWSTUFF\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
 fi
-ac_res=`eval 'as_val=${'$as_ac_Header'}
-		 $as_echo "$as_val"'`
-	       { $as_echo "$as_me:$LINENO: result: $ac_res" >&5
-$as_echo "$ac_res" >&6; }
-else
-  # Is the header compilable?
-{ $as_echo "$as_me:$LINENO: checking $ac_header usability" >&5
-$as_echo_n "checking $ac_header usability... " >&6; }
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-$ac_includes_default
-#include <$ac_header>
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_compile") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest.$ac_objext; then
-  ac_header_compiler=yes
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-	ac_header_compiler=no
+if test -z "${WIN32_TRUE}" && test -z "${WIN32_FALSE}"; then
+  as_fn_error "conditional \"WIN32\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${X11_TRUE}" && test -z "${X11_FALSE}"; then
+  as_fn_error "conditional \"X11\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${OSX_TRUE}" && test -z "${OSX_FALSE}"; then
+  as_fn_error "conditional \"OSX\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${ENABLE_DEMOS_TRUE}" && test -z "${ENABLE_DEMOS_FALSE}"; then
+  as_fn_error "conditional \"ENABLE_DEMOS\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${ENABLE_OU_TRUE}" && test -z "${ENABLE_OU_FALSE}"; then
+  as_fn_error "conditional \"ENABLE_OU\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
 fi
 
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-{ $as_echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
-$as_echo "$ac_header_compiler" >&6; }
+: ${CONFIG_STATUS=./config.status}
+ac_write_fail=0
+ac_clean_files_save=$ac_clean_files
+ac_clean_files="$ac_clean_files $CONFIG_STATUS"
+{ $as_echo "$as_me:${as_lineno-$LINENO}: creating $CONFIG_STATUS" >&5
+$as_echo "$as_me: creating $CONFIG_STATUS" >&6;}
+as_write_fail=0
+cat >$CONFIG_STATUS <<_ASEOF || as_write_fail=1
+#! $SHELL
+# Generated by $as_me.
+# Run this file to recreate the current configuration.
+# Compiler output produced by configure, useful for debugging
+# configure, is in config.log if it exists.
 
-# Is the header present?
-{ $as_echo "$as_me:$LINENO: checking $ac_header presence" >&5
-$as_echo_n "checking $ac_header presence... " >&6; }
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-#include <$ac_header>
-_ACEOF
-if { (ac_try="$ac_cpp conftest.$ac_ext"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } >/dev/null && {
-	 test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       }; then
-  ac_header_preproc=yes
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
+debug=false
+ac_cs_recheck=false
+ac_cs_silent=false
 
-  ac_header_preproc=no
+SHELL=\${CONFIG_SHELL-$SHELL}
+export SHELL
+_ASEOF
+cat >>$CONFIG_STATUS <<\_ASEOF || as_write_fail=1
+## -------------------- ##
+## M4sh Initialization. ##
+## -------------------- ##
+
+# Be more Bourne compatible
+DUALCASE=1; export DUALCASE # for MKS sh
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then :
+  emulate sh
+  NULLCMD=:
+  # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
+  # is contrary to our usage.  Disable this feature.
+  alias -g '${1+"$@"}'='"$@"'
+  setopt NO_GLOB_SUBST
+else
+  case `(set -o) 2>/dev/null` in #(
+  *posix*) :
+    set -o posix ;; #(
+  *) :
+     ;;
+esac
 fi
 
-rm -f conftest.err conftest.$ac_ext
-{ $as_echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
-$as_echo "$ac_header_preproc" >&6; }
 
-# So?  What about this header?
-case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in
-  yes:no: )
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
-$as_echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5
-$as_echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;}
-    ac_header_preproc=yes
-    ;;
-  no:yes:* )
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5
-$as_echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header:     check for missing prerequisite headers?" >&5
-$as_echo "$as_me: WARNING: $ac_header:     check for missing prerequisite headers?" >&2;}
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5
-$as_echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;}
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header:     section \"Present But Cannot Be Compiled\"" >&5
-$as_echo "$as_me: WARNING: $ac_header:     section \"Present But Cannot Be Compiled\"" >&2;}
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
-$as_echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5
-$as_echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;}
-    ( cat <<\_ASBOX
-## -------------------------- ##
-## Report this to ode@ode.org ##
-## -------------------------- ##
-_ASBOX
-     ) | sed "s/^/$as_me: WARNING:     /" >&2
-    ;;
-esac
-{ $as_echo "$as_me:$LINENO: checking for $ac_header" >&5
-$as_echo_n "checking for $ac_header... " >&6; }
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
-  $as_echo_n "(cached) " >&6
+as_nl='
+'
+export as_nl
+# Printing a long string crashes Solaris 7 /usr/bin/printf.
+as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
+# Prefer a ksh shell builtin over an external printf program on Solaris,
+# but without wasting forks for bash or zsh.
+if test -z "$BASH_VERSION$ZSH_VERSION" \
+    && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then
+  as_echo='print -r --'
+  as_echo_n='print -rn --'
+elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
+  as_echo='printf %s\n'
+  as_echo_n='printf %s'
 else
-  eval "$as_ac_Header=\$ac_header_preproc"
+  if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
+    as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
+    as_echo_n='/usr/ucb/echo -n'
+  else
+    as_echo_body='eval expr "X$1" : "X\\(.*\\)"'
+    as_echo_n_body='eval
+      arg=$1;
+      case $arg in #(
+      *"$as_nl"*)
+	expr "X$arg" : "X\\(.*\\)$as_nl";
+	arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
+      esac;
+      expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl"
+    '
+    export as_echo_n_body
+    as_echo_n='sh -c $as_echo_n_body as_echo'
+  fi
+  export as_echo_body
+  as_echo='sh -c $as_echo_body as_echo'
 fi
-ac_res=`eval 'as_val=${'$as_ac_Header'}
-		 $as_echo "$as_val"'`
-	       { $as_echo "$as_me:$LINENO: result: $ac_res" >&5
-$as_echo "$ac_res" >&6; }
 
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+  PATH_SEPARATOR=:
+  (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
+    (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
+      PATH_SEPARATOR=';'
+  }
 fi
-as_val=`eval 'as_val=${'$as_ac_Header'}
-		 $as_echo "$as_val"'`
-   if test "x$as_val" = x""yes; then
-  cat >>confdefs.h <<_ACEOF
-#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
-_ACEOF
 
-fi
 
-done
+# IFS
+# We need space, tab and new line, in precisely that order.  Quoting is
+# there to prevent editors from complaining about space-tab.
+# (If _AS_PATH_WALK were called with IFS unset, it would disable word
+# splitting by setting IFS to empty value.)
+IFS=" ""	$as_nl"
 
-{ $as_echo "$as_me:$LINENO: checking for GNU libc compatible malloc" >&5
-$as_echo_n "checking for GNU libc compatible malloc... " >&6; }
-if test "${ac_cv_func_malloc_0_nonnull+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
-  if test "$cross_compiling" = yes; then
-  ac_cv_func_malloc_0_nonnull=no
-else
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-#if defined STDC_HEADERS || defined HAVE_STDLIB_H
-# include <stdlib.h>
-#else
-char *malloc ();
-#endif
+# Find who we are.  Look in the path if we contain no directory separator.
+case $0 in #((
+  *[\\/]* ) as_myself=$0 ;;
+  *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
+  done
+IFS=$as_save_IFS
 
-int
-main ()
-{
-return ! malloc (0);
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_link") 2>&5
-  ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
-  { (case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
+     ;;
 esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_try") 2>&5
-  ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_func_malloc_0_nonnull=yes
-else
-  $as_echo "$as_me: program exited with status $ac_status" >&5
-$as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-( exit $ac_status )
-ac_cv_func_malloc_0_nonnull=no
+# We did not find ourselves, most probably we were run as `sh COMMAND'
+# in which case we are not to be found in the path.
+if test "x$as_myself" = x; then
+  as_myself=$0
 fi
-rm -rf conftest.dSYM
-rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
+if test ! -f "$as_myself"; then
+  $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
+  exit 1
 fi
 
+# Unset variables that we do not need and which cause bugs (e.g. in
+# pre-3.0 UWIN ksh).  But do not cause bugs in bash 2.01; the "|| exit 1"
+# suppresses any "Segmentation fault" message there.  '((' could
+# trigger a bug in pdksh 5.2.14.
+for as_var in BASH_ENV ENV MAIL MAILPATH
+do eval test x\${$as_var+set} = xset \
+  && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || :
+done
+PS1='$ '
+PS2='> '
+PS4='+ '
 
-fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_func_malloc_0_nonnull" >&5
-$as_echo "$ac_cv_func_malloc_0_nonnull" >&6; }
-if test $ac_cv_func_malloc_0_nonnull = yes; then
+# NLS nuisances.
+LC_ALL=C
+export LC_ALL
+LANGUAGE=C
+export LANGUAGE
 
-cat >>confdefs.h <<\_ACEOF
-#define HAVE_MALLOC 1
-_ACEOF
+# CDPATH.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+
+# as_fn_error ERROR [LINENO LOG_FD]
+# ---------------------------------
+# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
+# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
+# script with status $?, using 1 if that was 0.
+as_fn_error ()
+{
+  as_status=$?; test $as_status -eq 0 && as_status=1
+  if test "$3"; then
+    as_lineno=${as_lineno-"$2"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+    $as_echo "$as_me:${as_lineno-$LINENO}: error: $1" >&$3
+  fi
+  $as_echo "$as_me: error: $1" >&2
+  as_fn_exit $as_status
+} # as_fn_error
+
+
+# as_fn_set_status STATUS
+# -----------------------
+# Set $? to STATUS, without forking.
+as_fn_set_status ()
+{
+  return $1
+} # as_fn_set_status
+
+# as_fn_exit STATUS
+# -----------------
+# Exit the shell with STATUS, even in a "trap 0" or "set -e" context.
+as_fn_exit ()
+{
+  set +e
+  as_fn_set_status $1
+  exit $1
+} # as_fn_exit
+
+# as_fn_unset VAR
+# ---------------
+# Portably unset VAR.
+as_fn_unset ()
+{
+  { eval $1=; unset $1;}
+}
+as_unset=as_fn_unset
+# as_fn_append VAR VALUE
+# ----------------------
+# Append the text in VALUE to the end of the definition contained in VAR. Take
+# advantage of any shell optimizations that allow amortized linear growth over
+# repeated appends, instead of the typical quadratic growth present in naive
+# implementations.
+if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then :
+  eval 'as_fn_append ()
+  {
+    eval $1+=\$2
+  }'
+else
+  as_fn_append ()
+  {
+    eval $1=\$$1\$2
+  }
+fi # as_fn_append
 
+# as_fn_arith ARG...
+# ------------------
+# Perform arithmetic evaluation on the ARGs, and store the result in the
+# global $as_val. Take advantage of shells that can avoid forks. The arguments
+# must be portable across $(()) and expr.
+if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then :
+  eval 'as_fn_arith ()
+  {
+    as_val=$(( $* ))
+  }'
 else
-  cat >>confdefs.h <<\_ACEOF
-#define HAVE_MALLOC 0
-_ACEOF
+  as_fn_arith ()
+  {
+    as_val=`expr "$@" || test $? -eq 1`
+  }
+fi # as_fn_arith
 
-   case " $LIBOBJS " in
-  *" malloc.$ac_objext "* ) ;;
-  *) LIBOBJS="$LIBOBJS malloc.$ac_objext"
- ;;
-esac
 
+if expr a : '\(a\)' >/dev/null 2>&1 &&
+   test "X`expr 00001 : '.*\(...\)'`" = X001; then
+  as_expr=expr
+else
+  as_expr=false
+fi
 
-cat >>confdefs.h <<\_ACEOF
-#define malloc rpl_malloc
-_ACEOF
+if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
+  as_basename=basename
+else
+  as_basename=false
+fi
 
+if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
+  as_dirname=dirname
+else
+  as_dirname=false
 fi
 
+as_me=`$as_basename -- "$0" ||
+$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
+	 X"$0" : 'X\(//\)$' \| \
+	 X"$0" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X/"$0" |
+    sed '/^.*\/\([^/][^/]*\)\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\/\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\/\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+
+# Avoid depending upon Character Ranges.
+as_cr_letters='abcdefghijklmnopqrstuvwxyz'
+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
+as_cr_Letters=$as_cr_letters$as_cr_LETTERS
+as_cr_digits='0123456789'
+as_cr_alnum=$as_cr_Letters$as_cr_digits
 
+ECHO_C= ECHO_N= ECHO_T=
+case `echo -n x` in #(((((
+-n*)
+  case `echo 'xy\c'` in
+  *c*) ECHO_T='	';;	# ECHO_T is single tab character.
+  xy)  ECHO_C='\c';;
+  *)   echo `echo ksh88 bug on AIX 6.1` > /dev/null
+       ECHO_T='	';;
+  esac;;
+*)
+  ECHO_N='-n';;
+esac
 
-{ $as_echo "$as_me:$LINENO: checking for obstacks" >&5
-$as_echo_n "checking for obstacks... " >&6; }
-if test "${ac_cv_func_obstack+set}" = set; then
-  $as_echo_n "(cached) " >&6
+rm -f conf$$ conf$$.exe conf$$.file
+if test -d conf$$.dir; then
+  rm -f conf$$.dir/conf$$.file
 else
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-$ac_includes_default
-		      #include "obstack.h"
-int
-main ()
-{
-struct obstack mem;
-		       #define obstack_chunk_alloc malloc
-		       #define obstack_chunk_free free
-		       obstack_init (&mem);
-		       obstack_free (&mem, 0);
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_link") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest$ac_exeext && {
-	 test "$cross_compiling" = yes ||
-	 $as_test_x conftest$ac_exeext
-       }; then
-  ac_cv_func_obstack=yes
+  rm -f conf$$.dir
+  mkdir conf$$.dir 2>/dev/null
+fi
+if (echo >conf$$.file) 2>/dev/null; then
+  if ln -s conf$$.file conf$$ 2>/dev/null; then
+    as_ln_s='ln -s'
+    # ... but there are two gotchas:
+    # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
+    # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
+    # In both cases, we have to default to `cp -p'.
+    ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
+      as_ln_s='cp -p'
+  elif ln conf$$.file conf$$ 2>/dev/null; then
+    as_ln_s=ln
+  else
+    as_ln_s='cp -p'
+  fi
 else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-	ac_cv_func_obstack=no
+  as_ln_s='cp -p'
 fi
+rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
+rmdir conf$$.dir 2>/dev/null
 
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-      conftest$ac_exeext conftest.$ac_ext
-fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_func_obstack" >&5
-$as_echo "$ac_cv_func_obstack" >&6; }
-if test $ac_cv_func_obstack = yes; then
 
-cat >>confdefs.h <<\_ACEOF
-#define HAVE_OBSTACK 1
-_ACEOF
+# as_fn_mkdir_p
+# -------------
+# Create "$as_dir" as a directory, including parents if necessary.
+as_fn_mkdir_p ()
+{
+
+  case $as_dir in #(
+  -*) as_dir=./$as_dir;;
+  esac
+  test -d "$as_dir" || eval $as_mkdir_p || {
+    as_dirs=
+    while :; do
+      case $as_dir in #(
+      *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
+      *) as_qdir=$as_dir;;
+      esac
+      as_dirs="'$as_qdir' $as_dirs"
+      as_dir=`$as_dirname -- "$as_dir" ||
+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$as_dir" : 'X\(//\)[^/]' \| \
+	 X"$as_dir" : 'X\(//\)$' \| \
+	 X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$as_dir" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+      test -d "$as_dir" && break
+    done
+    test -z "$as_dirs" || eval "mkdir $as_dirs"
+  } || test -d "$as_dir" || as_fn_error "cannot create directory $as_dir"
+
 
+} # as_fn_mkdir_p
+if mkdir -p . 2>/dev/null; then
+  as_mkdir_p='mkdir -p "$as_dir"'
 else
-  case " $LIBOBJS " in
-  *" obstack.$ac_objext "* ) ;;
-  *) LIBOBJS="$LIBOBJS obstack.$ac_objext"
- ;;
-esac
-
+  test -d ./-p && rmdir ./-p
+  as_mkdir_p=false
 fi
 
-
-for ac_header in stdlib.h
-do
-as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
-  { $as_echo "$as_me:$LINENO: checking for $ac_header" >&5
-$as_echo_n "checking for $ac_header... " >&6; }
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
-  $as_echo_n "(cached) " >&6
-fi
-ac_res=`eval 'as_val=${'$as_ac_Header'}
-		 $as_echo "$as_val"'`
-	       { $as_echo "$as_me:$LINENO: result: $ac_res" >&5
-$as_echo "$ac_res" >&6; }
-else
-  # Is the header compilable?
-{ $as_echo "$as_me:$LINENO: checking $ac_header usability" >&5
-$as_echo_n "checking $ac_header usability... " >&6; }
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-$ac_includes_default
-#include <$ac_header>
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_compile") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest.$ac_objext; then
-  ac_header_compiler=yes
+if test -x / >/dev/null 2>&1; then
+  as_test_x='test -x'
 else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-	ac_header_compiler=no
+  if ls -dL / >/dev/null 2>&1; then
+    as_ls_L_option=L
+  else
+    as_ls_L_option=
+  fi
+  as_test_x='
+    eval sh -c '\''
+      if test -d "$1"; then
+	test -d "$1/.";
+      else
+	case $1 in #(
+	-*)set "./$1";;
+	esac;
+	case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in #((
+	???[sx]*):;;*)false;;esac;fi
+    '\'' sh
+  '
 fi
+as_executable_p=$as_test_x
 
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-{ $as_echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
-$as_echo "$ac_header_compiler" >&6; }
-
-# Is the header present?
-{ $as_echo "$as_me:$LINENO: checking $ac_header presence" >&5
-$as_echo_n "checking $ac_header presence... " >&6; }
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-#include <$ac_header>
-_ACEOF
-if { (ac_try="$ac_cpp conftest.$ac_ext"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } >/dev/null && {
-	 test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       }; then
-  ac_header_preproc=yes
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
+# Sed expression to map a string onto a valid CPP name.
+as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
 
-  ac_header_preproc=no
-fi
+# Sed expression to map a string onto a valid variable name.
+as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
 
-rm -f conftest.err conftest.$ac_ext
-{ $as_echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
-$as_echo "$ac_header_preproc" >&6; }
 
-# So?  What about this header?
-case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in
-  yes:no: )
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
-$as_echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5
-$as_echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;}
-    ac_header_preproc=yes
-    ;;
-  no:yes:* )
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5
-$as_echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header:     check for missing prerequisite headers?" >&5
-$as_echo "$as_me: WARNING: $ac_header:     check for missing prerequisite headers?" >&2;}
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5
-$as_echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;}
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header:     section \"Present But Cannot Be Compiled\"" >&5
-$as_echo "$as_me: WARNING: $ac_header:     section \"Present But Cannot Be Compiled\"" >&2;}
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
-$as_echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5
-$as_echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;}
-    ( cat <<\_ASBOX
-## -------------------------- ##
-## Report this to ode@ode.org ##
-## -------------------------- ##
-_ASBOX
-     ) | sed "s/^/$as_me: WARNING:     /" >&2
-    ;;
-esac
-{ $as_echo "$as_me:$LINENO: checking for $ac_header" >&5
-$as_echo_n "checking for $ac_header... " >&6; }
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
-  $as_echo_n "(cached) " >&6
-else
-  eval "$as_ac_Header=\$ac_header_preproc"
-fi
-ac_res=`eval 'as_val=${'$as_ac_Header'}
-		 $as_echo "$as_val"'`
-	       { $as_echo "$as_me:$LINENO: result: $ac_res" >&5
-$as_echo "$ac_res" >&6; }
+exec 6>&1
+## ----------------------------------- ##
+## Main body of $CONFIG_STATUS script. ##
+## ----------------------------------- ##
+_ASEOF
+test $as_write_fail = 0 && chmod +x $CONFIG_STATUS || ac_write_fail=1
 
-fi
-as_val=`eval 'as_val=${'$as_ac_Header'}
-		 $as_echo "$as_val"'`
-   if test "x$as_val" = x""yes; then
-  cat >>confdefs.h <<_ACEOF
-#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
-_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+# Save the log message, to keep $0 and so on meaningful, and to
+# report actual input values of CONFIG_FILES etc. instead of their
+# values after options handling.
+ac_log="
+This file was extended by ODE $as_me 0.11, which was
+generated by GNU Autoconf 2.64.  Invocation command line was
 
-fi
+  CONFIG_FILES    = $CONFIG_FILES
+  CONFIG_HEADERS  = $CONFIG_HEADERS
+  CONFIG_LINKS    = $CONFIG_LINKS
+  CONFIG_COMMANDS = $CONFIG_COMMANDS
+  $ $0 $@
 
-done
+on `(hostname || uname -n) 2>/dev/null | sed 1q`
+"
 
-{ $as_echo "$as_me:$LINENO: checking for GNU libc compatible realloc" >&5
-$as_echo_n "checking for GNU libc compatible realloc... " >&6; }
-if test "${ac_cv_func_realloc_0_nonnull+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
-  if test "$cross_compiling" = yes; then
-  ac_cv_func_realloc_0_nonnull=no
-else
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
 _ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-#if defined STDC_HEADERS || defined HAVE_STDLIB_H
-# include <stdlib.h>
-#else
-char *realloc ();
-#endif
 
-int
-main ()
-{
-return ! realloc (0, 0);
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_link") 2>&5
-  ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
-  { (case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
+case $ac_config_files in *"
+"*) set x $ac_config_files; shift; ac_config_files=$*;;
 esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_try") 2>&5
-  ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_func_realloc_0_nonnull=yes
-else
-  $as_echo "$as_me: program exited with status $ac_status" >&5
-$as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
 
-( exit $ac_status )
-ac_cv_func_realloc_0_nonnull=no
-fi
-rm -rf conftest.dSYM
-rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
-fi
+case $ac_config_headers in *"
+"*) set x $ac_config_headers; shift; ac_config_headers=$*;;
+esac
 
 
-fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_func_realloc_0_nonnull" >&5
-$as_echo "$ac_cv_func_realloc_0_nonnull" >&6; }
-if test $ac_cv_func_realloc_0_nonnull = yes; then
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+# Files that config.status was made for.
+config_files="$ac_config_files"
+config_headers="$ac_config_headers"
+config_commands="$ac_config_commands"
 
-cat >>confdefs.h <<\_ACEOF
-#define HAVE_REALLOC 1
 _ACEOF
 
-else
-  cat >>confdefs.h <<\_ACEOF
-#define HAVE_REALLOC 0
-_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+ac_cs_usage="\
+\`$as_me' instantiates files and other configuration actions
+from templates according to the current configuration.  Unless the files
+and actions are specified as TAGs, all are instantiated by default.
 
-   case " $LIBOBJS " in
-  *" realloc.$ac_objext "* ) ;;
-  *) LIBOBJS="$LIBOBJS realloc.$ac_objext"
- ;;
-esac
+Usage: $0 [OPTION]... [TAG]...
 
+  -h, --help       print this help, then exit
+  -V, --version    print version number and configuration settings, then exit
+  -q, --quiet, --silent
+                   do not print progress messages
+  -d, --debug      don't remove temporary files
+      --recheck    update $as_me by reconfiguring in the same conditions
+      --file=FILE[:TEMPLATE]
+                   instantiate the configuration file FILE
+      --header=FILE[:TEMPLATE]
+                   instantiate the configuration header FILE
 
-cat >>confdefs.h <<\_ACEOF
-#define realloc rpl_realloc
-_ACEOF
+Configuration files:
+$config_files
 
-fi
+Configuration headers:
+$config_headers
 
+Configuration commands:
+$config_commands
 
+Report bugs to <ode@ode.org>."
 
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+ac_cs_version="\\
+ODE config.status 0.11
+configured by $0, generated by GNU Autoconf 2.64,
+  with options \\"`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`\\"
 
+Copyright (C) 2009 Free Software Foundation, Inc.
+This config.status script is free software; the Free Software Foundation
+gives unlimited permission to copy, distribute and modify it."
 
-for ac_header in sys/select.h sys/socket.h
-do
-as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
-  { $as_echo "$as_me:$LINENO: checking for $ac_header" >&5
-$as_echo_n "checking for $ac_header... " >&6; }
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
-  $as_echo_n "(cached) " >&6
-fi
-ac_res=`eval 'as_val=${'$as_ac_Header'}
-		 $as_echo "$as_val"'`
-	       { $as_echo "$as_me:$LINENO: result: $ac_res" >&5
-$as_echo "$ac_res" >&6; }
-else
-  # Is the header compilable?
-{ $as_echo "$as_me:$LINENO: checking $ac_header usability" >&5
-$as_echo_n "checking $ac_header usability... " >&6; }
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-$ac_includes_default
-#include <$ac_header>
+ac_pwd='$ac_pwd'
+srcdir='$srcdir'
+INSTALL='$INSTALL'
+MKDIR_P='$MKDIR_P'
+AWK='$AWK'
+test -n "\$AWK" || AWK=awk
 _ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_compile") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest.$ac_objext; then
-  ac_header_compiler=yes
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
 
-	ac_header_compiler=no
-fi
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+# The default lists apply if the user does not specify any file.
+ac_need_defaults=:
+while test $# != 0
+do
+  case $1 in
+  --*=*)
+    ac_option=`expr "X$1" : 'X\([^=]*\)='`
+    ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'`
+    ac_shift=:
+    ;;
+  *)
+    ac_option=$1
+    ac_optarg=$2
+    ac_shift=shift
+    ;;
+  esac
+
+  case $ac_option in
+  # Handling of the options.
+  -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
+    ac_cs_recheck=: ;;
+  --version | --versio | --versi | --vers | --ver | --ve | --v | -V )
+    $as_echo "$ac_cs_version"; exit ;;
+  --debug | --debu | --deb | --de | --d | -d )
+    debug=: ;;
+  --file | --fil | --fi | --f )
+    $ac_shift
+    case $ac_optarg in
+    *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;;
+    esac
+    as_fn_append CONFIG_FILES " '$ac_optarg'"
+    ac_need_defaults=false;;
+  --header | --heade | --head | --hea )
+    $ac_shift
+    case $ac_optarg in
+    *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;;
+    esac
+    as_fn_append CONFIG_HEADERS " '$ac_optarg'"
+    ac_need_defaults=false;;
+  --he | --h)
+    # Conflict between --help and --header
+    as_fn_error "ambiguous option: \`$1'
+Try \`$0 --help' for more information.";;
+  --help | --hel | -h )
+    $as_echo "$ac_cs_usage"; exit ;;
+  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+  | -silent | --silent | --silen | --sile | --sil | --si | --s)
+    ac_cs_silent=: ;;
+
+  # This is an error.
+  -*) as_fn_error "unrecognized option: \`$1'
+Try \`$0 --help' for more information." ;;
 
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-{ $as_echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
-$as_echo "$ac_header_compiler" >&6; }
+  *) as_fn_append ac_config_targets " $1"
+     ac_need_defaults=false ;;
 
-# Is the header present?
-{ $as_echo "$as_me:$LINENO: checking $ac_header presence" >&5
-$as_echo_n "checking $ac_header presence... " >&6; }
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-#include <$ac_header>
-_ACEOF
-if { (ac_try="$ac_cpp conftest.$ac_ext"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } >/dev/null && {
-	 test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       }; then
-  ac_header_preproc=yes
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
+  esac
+  shift
+done
 
-  ac_header_preproc=no
+ac_configure_extra_args=
+
+if $ac_cs_silent; then
+  exec 6>/dev/null
+  ac_configure_extra_args="$ac_configure_extra_args --silent"
 fi
 
-rm -f conftest.err conftest.$ac_ext
-{ $as_echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
-$as_echo "$ac_header_preproc" >&6; }
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+if \$ac_cs_recheck; then
+  set X '$SHELL' '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
+  shift
+  \$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6
+  CONFIG_SHELL='$SHELL'
+  export CONFIG_SHELL
+  exec "\$@"
+fi
 
-# So?  What about this header?
-case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in
-  yes:no: )
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
-$as_echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5
-$as_echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;}
-    ac_header_preproc=yes
-    ;;
-  no:yes:* )
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5
-$as_echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header:     check for missing prerequisite headers?" >&5
-$as_echo "$as_me: WARNING: $ac_header:     check for missing prerequisite headers?" >&2;}
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5
-$as_echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;}
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header:     section \"Present But Cannot Be Compiled\"" >&5
-$as_echo "$as_me: WARNING: $ac_header:     section \"Present But Cannot Be Compiled\"" >&2;}
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
-$as_echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5
-$as_echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;}
-    ( cat <<\_ASBOX
-## -------------------------- ##
-## Report this to ode@ode.org ##
-## -------------------------- ##
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+exec 5>>config.log
+{
+  echo
+  sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX
+## Running $as_me. ##
 _ASBOX
-     ) | sed "s/^/$as_me: WARNING:     /" >&2
-    ;;
-esac
-{ $as_echo "$as_me:$LINENO: checking for $ac_header" >&5
-$as_echo_n "checking for $ac_header... " >&6; }
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
-  $as_echo_n "(cached) " >&6
-else
-  eval "$as_ac_Header=\$ac_header_preproc"
-fi
-ac_res=`eval 'as_val=${'$as_ac_Header'}
-		 $as_echo "$as_val"'`
-	       { $as_echo "$as_me:$LINENO: result: $ac_res" >&5
-$as_echo "$ac_res" >&6; }
+  $as_echo "$ac_log"
+} >&5
 
-fi
-as_val=`eval 'as_val=${'$as_ac_Header'}
-		 $as_echo "$as_val"'`
-   if test "x$as_val" = x""yes; then
-  cat >>confdefs.h <<_ACEOF
-#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
 _ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+#
+# INIT-COMMANDS
+#
+AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"
 
-fi
 
+# The HP-UX ksh and POSIX shell print the target directory to stdout
+# if CDPATH is set.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+sed_quote_subst='$sed_quote_subst'
+double_quote_subst='$double_quote_subst'
+delay_variable_subst='$delay_variable_subst'
+enable_shared='`$ECHO "X$enable_shared" | $Xsed -e "$delay_single_quote_subst"`'
+AS='`$ECHO "X$AS" | $Xsed -e "$delay_single_quote_subst"`'
+DLLTOOL='`$ECHO "X$DLLTOOL" | $Xsed -e "$delay_single_quote_subst"`'
+OBJDUMP='`$ECHO "X$OBJDUMP" | $Xsed -e "$delay_single_quote_subst"`'
+macro_version='`$ECHO "X$macro_version" | $Xsed -e "$delay_single_quote_subst"`'
+macro_revision='`$ECHO "X$macro_revision" | $Xsed -e "$delay_single_quote_subst"`'
+enable_static='`$ECHO "X$enable_static" | $Xsed -e "$delay_single_quote_subst"`'
+pic_mode='`$ECHO "X$pic_mode" | $Xsed -e "$delay_single_quote_subst"`'
+enable_fast_install='`$ECHO "X$enable_fast_install" | $Xsed -e "$delay_single_quote_subst"`'
+host_alias='`$ECHO "X$host_alias" | $Xsed -e "$delay_single_quote_subst"`'
+host='`$ECHO "X$host" | $Xsed -e "$delay_single_quote_subst"`'
+host_os='`$ECHO "X$host_os" | $Xsed -e "$delay_single_quote_subst"`'
+build_alias='`$ECHO "X$build_alias" | $Xsed -e "$delay_single_quote_subst"`'
+build='`$ECHO "X$build" | $Xsed -e "$delay_single_quote_subst"`'
+build_os='`$ECHO "X$build_os" | $Xsed -e "$delay_single_quote_subst"`'
+SED='`$ECHO "X$SED" | $Xsed -e "$delay_single_quote_subst"`'
+Xsed='`$ECHO "X$Xsed" | $Xsed -e "$delay_single_quote_subst"`'
+GREP='`$ECHO "X$GREP" | $Xsed -e "$delay_single_quote_subst"`'
+EGREP='`$ECHO "X$EGREP" | $Xsed -e "$delay_single_quote_subst"`'
+FGREP='`$ECHO "X$FGREP" | $Xsed -e "$delay_single_quote_subst"`'
+LD='`$ECHO "X$LD" | $Xsed -e "$delay_single_quote_subst"`'
+NM='`$ECHO "X$NM" | $Xsed -e "$delay_single_quote_subst"`'
+LN_S='`$ECHO "X$LN_S" | $Xsed -e "$delay_single_quote_subst"`'
+max_cmd_len='`$ECHO "X$max_cmd_len" | $Xsed -e "$delay_single_quote_subst"`'
+ac_objext='`$ECHO "X$ac_objext" | $Xsed -e "$delay_single_quote_subst"`'
+exeext='`$ECHO "X$exeext" | $Xsed -e "$delay_single_quote_subst"`'
+lt_unset='`$ECHO "X$lt_unset" | $Xsed -e "$delay_single_quote_subst"`'
+lt_SP2NL='`$ECHO "X$lt_SP2NL" | $Xsed -e "$delay_single_quote_subst"`'
+lt_NL2SP='`$ECHO "X$lt_NL2SP" | $Xsed -e "$delay_single_quote_subst"`'
+reload_flag='`$ECHO "X$reload_flag" | $Xsed -e "$delay_single_quote_subst"`'
+reload_cmds='`$ECHO "X$reload_cmds" | $Xsed -e "$delay_single_quote_subst"`'
+deplibs_check_method='`$ECHO "X$deplibs_check_method" | $Xsed -e "$delay_single_quote_subst"`'
+file_magic_cmd='`$ECHO "X$file_magic_cmd" | $Xsed -e "$delay_single_quote_subst"`'
+AR='`$ECHO "X$AR" | $Xsed -e "$delay_single_quote_subst"`'
+AR_FLAGS='`$ECHO "X$AR_FLAGS" | $Xsed -e "$delay_single_quote_subst"`'
+STRIP='`$ECHO "X$STRIP" | $Xsed -e "$delay_single_quote_subst"`'
+RANLIB='`$ECHO "X$RANLIB" | $Xsed -e "$delay_single_quote_subst"`'
+old_postinstall_cmds='`$ECHO "X$old_postinstall_cmds" | $Xsed -e "$delay_single_quote_subst"`'
+old_postuninstall_cmds='`$ECHO "X$old_postuninstall_cmds" | $Xsed -e "$delay_single_quote_subst"`'
+old_archive_cmds='`$ECHO "X$old_archive_cmds" | $Xsed -e "$delay_single_quote_subst"`'
+CC='`$ECHO "X$CC" | $Xsed -e "$delay_single_quote_subst"`'
+CFLAGS='`$ECHO "X$CFLAGS" | $Xsed -e "$delay_single_quote_subst"`'
+compiler='`$ECHO "X$compiler" | $Xsed -e "$delay_single_quote_subst"`'
+GCC='`$ECHO "X$GCC" | $Xsed -e "$delay_single_quote_subst"`'
+lt_cv_sys_global_symbol_pipe='`$ECHO "X$lt_cv_sys_global_symbol_pipe" | $Xsed -e "$delay_single_quote_subst"`'
+lt_cv_sys_global_symbol_to_cdecl='`$ECHO "X$lt_cv_sys_global_symbol_to_cdecl" | $Xsed -e "$delay_single_quote_subst"`'
+lt_cv_sys_global_symbol_to_c_name_address='`$ECHO "X$lt_cv_sys_global_symbol_to_c_name_address" | $Xsed -e "$delay_single_quote_subst"`'
+lt_cv_sys_global_symbol_to_c_name_address_lib_prefix='`$ECHO "X$lt_cv_sys_global_symbol_to_c_name_address_lib_prefix" | $Xsed -e "$delay_single_quote_subst"`'
+objdir='`$ECHO "X$objdir" | $Xsed -e "$delay_single_quote_subst"`'
+SHELL='`$ECHO "X$SHELL" | $Xsed -e "$delay_single_quote_subst"`'
+ECHO='`$ECHO "X$ECHO" | $Xsed -e "$delay_single_quote_subst"`'
+MAGIC_CMD='`$ECHO "X$MAGIC_CMD" | $Xsed -e "$delay_single_quote_subst"`'
+lt_prog_compiler_no_builtin_flag='`$ECHO "X$lt_prog_compiler_no_builtin_flag" | $Xsed -e "$delay_single_quote_subst"`'
+lt_prog_compiler_wl='`$ECHO "X$lt_prog_compiler_wl" | $Xsed -e "$delay_single_quote_subst"`'
+lt_prog_compiler_pic='`$ECHO "X$lt_prog_compiler_pic" | $Xsed -e "$delay_single_quote_subst"`'
+lt_prog_compiler_static='`$ECHO "X$lt_prog_compiler_static" | $Xsed -e "$delay_single_quote_subst"`'
+lt_cv_prog_compiler_c_o='`$ECHO "X$lt_cv_prog_compiler_c_o" | $Xsed -e "$delay_single_quote_subst"`'
+need_locks='`$ECHO "X$need_locks" | $Xsed -e "$delay_single_quote_subst"`'
+DSYMUTIL='`$ECHO "X$DSYMUTIL" | $Xsed -e "$delay_single_quote_subst"`'
+NMEDIT='`$ECHO "X$NMEDIT" | $Xsed -e "$delay_single_quote_subst"`'
+LIPO='`$ECHO "X$LIPO" | $Xsed -e "$delay_single_quote_subst"`'
+OTOOL='`$ECHO "X$OTOOL" | $Xsed -e "$delay_single_quote_subst"`'
+OTOOL64='`$ECHO "X$OTOOL64" | $Xsed -e "$delay_single_quote_subst"`'
+libext='`$ECHO "X$libext" | $Xsed -e "$delay_single_quote_subst"`'
+shrext_cmds='`$ECHO "X$shrext_cmds" | $Xsed -e "$delay_single_quote_subst"`'
+extract_expsyms_cmds='`$ECHO "X$extract_expsyms_cmds" | $Xsed -e "$delay_single_quote_subst"`'
+archive_cmds_need_lc='`$ECHO "X$archive_cmds_need_lc" | $Xsed -e "$delay_single_quote_subst"`'
+enable_shared_with_static_runtimes='`$ECHO "X$enable_shared_with_static_runtimes" | $Xsed -e "$delay_single_quote_subst"`'
+export_dynamic_flag_spec='`$ECHO "X$export_dynamic_flag_spec" | $Xsed -e "$delay_single_quote_subst"`'
+whole_archive_flag_spec='`$ECHO "X$whole_archive_flag_spec" | $Xsed -e "$delay_single_quote_subst"`'
+compiler_needs_object='`$ECHO "X$compiler_needs_object" | $Xsed -e "$delay_single_quote_subst"`'
+old_archive_from_new_cmds='`$ECHO "X$old_archive_from_new_cmds" | $Xsed -e "$delay_single_quote_subst"`'
+old_archive_from_expsyms_cmds='`$ECHO "X$old_archive_from_expsyms_cmds" | $Xsed -e "$delay_single_quote_subst"`'
+archive_cmds='`$ECHO "X$archive_cmds" | $Xsed -e "$delay_single_quote_subst"`'
+archive_expsym_cmds='`$ECHO "X$archive_expsym_cmds" | $Xsed -e "$delay_single_quote_subst"`'
+module_cmds='`$ECHO "X$module_cmds" | $Xsed -e "$delay_single_quote_subst"`'
+module_expsym_cmds='`$ECHO "X$module_expsym_cmds" | $Xsed -e "$delay_single_quote_subst"`'
+with_gnu_ld='`$ECHO "X$with_gnu_ld" | $Xsed -e "$delay_single_quote_subst"`'
+allow_undefined_flag='`$ECHO "X$allow_undefined_flag" | $Xsed -e "$delay_single_quote_subst"`'
+no_undefined_flag='`$ECHO "X$no_undefined_flag" | $Xsed -e "$delay_single_quote_subst"`'
+hardcode_libdir_flag_spec='`$ECHO "X$hardcode_libdir_flag_spec" | $Xsed -e "$delay_single_quote_subst"`'
+hardcode_libdir_flag_spec_ld='`$ECHO "X$hardcode_libdir_flag_spec_ld" | $Xsed -e "$delay_single_quote_subst"`'
+hardcode_libdir_separator='`$ECHO "X$hardcode_libdir_separator" | $Xsed -e "$delay_single_quote_subst"`'
+hardcode_direct='`$ECHO "X$hardcode_direct" | $Xsed -e "$delay_single_quote_subst"`'
+hardcode_direct_absolute='`$ECHO "X$hardcode_direct_absolute" | $Xsed -e "$delay_single_quote_subst"`'
+hardcode_minus_L='`$ECHO "X$hardcode_minus_L" | $Xsed -e "$delay_single_quote_subst"`'
+hardcode_shlibpath_var='`$ECHO "X$hardcode_shlibpath_var" | $Xsed -e "$delay_single_quote_subst"`'
+hardcode_automatic='`$ECHO "X$hardcode_automatic" | $Xsed -e "$delay_single_quote_subst"`'
+inherit_rpath='`$ECHO "X$inherit_rpath" | $Xsed -e "$delay_single_quote_subst"`'
+link_all_deplibs='`$ECHO "X$link_all_deplibs" | $Xsed -e "$delay_single_quote_subst"`'
+fix_srcfile_path='`$ECHO "X$fix_srcfile_path" | $Xsed -e "$delay_single_quote_subst"`'
+always_export_symbols='`$ECHO "X$always_export_symbols" | $Xsed -e "$delay_single_quote_subst"`'
+export_symbols_cmds='`$ECHO "X$export_symbols_cmds" | $Xsed -e "$delay_single_quote_subst"`'
+exclude_expsyms='`$ECHO "X$exclude_expsyms" | $Xsed -e "$delay_single_quote_subst"`'
+include_expsyms='`$ECHO "X$include_expsyms" | $Xsed -e "$delay_single_quote_subst"`'
+prelink_cmds='`$ECHO "X$prelink_cmds" | $Xsed -e "$delay_single_quote_subst"`'
+file_list_spec='`$ECHO "X$file_list_spec" | $Xsed -e "$delay_single_quote_subst"`'
+variables_saved_for_relink='`$ECHO "X$variables_saved_for_relink" | $Xsed -e "$delay_single_quote_subst"`'
+need_lib_prefix='`$ECHO "X$need_lib_prefix" | $Xsed -e "$delay_single_quote_subst"`'
+need_version='`$ECHO "X$need_version" | $Xsed -e "$delay_single_quote_subst"`'
+version_type='`$ECHO "X$version_type" | $Xsed -e "$delay_single_quote_subst"`'
+runpath_var='`$ECHO "X$runpath_var" | $Xsed -e "$delay_single_quote_subst"`'
+shlibpath_var='`$ECHO "X$shlibpath_var" | $Xsed -e "$delay_single_quote_subst"`'
+shlibpath_overrides_runpath='`$ECHO "X$shlibpath_overrides_runpath" | $Xsed -e "$delay_single_quote_subst"`'
+libname_spec='`$ECHO "X$libname_spec" | $Xsed -e "$delay_single_quote_subst"`'
+library_names_spec='`$ECHO "X$library_names_spec" | $Xsed -e "$delay_single_quote_subst"`'
+soname_spec='`$ECHO "X$soname_spec" | $Xsed -e "$delay_single_quote_subst"`'
+postinstall_cmds='`$ECHO "X$postinstall_cmds" | $Xsed -e "$delay_single_quote_subst"`'
+postuninstall_cmds='`$ECHO "X$postuninstall_cmds" | $Xsed -e "$delay_single_quote_subst"`'
+finish_cmds='`$ECHO "X$finish_cmds" | $Xsed -e "$delay_single_quote_subst"`'
+finish_eval='`$ECHO "X$finish_eval" | $Xsed -e "$delay_single_quote_subst"`'
+hardcode_into_libs='`$ECHO "X$hardcode_into_libs" | $Xsed -e "$delay_single_quote_subst"`'
+sys_lib_search_path_spec='`$ECHO "X$sys_lib_search_path_spec" | $Xsed -e "$delay_single_quote_subst"`'
+sys_lib_dlsearch_path_spec='`$ECHO "X$sys_lib_dlsearch_path_spec" | $Xsed -e "$delay_single_quote_subst"`'
+hardcode_action='`$ECHO "X$hardcode_action" | $Xsed -e "$delay_single_quote_subst"`'
+enable_dlopen='`$ECHO "X$enable_dlopen" | $Xsed -e "$delay_single_quote_subst"`'
+enable_dlopen_self='`$ECHO "X$enable_dlopen_self" | $Xsed -e "$delay_single_quote_subst"`'
+enable_dlopen_self_static='`$ECHO "X$enable_dlopen_self_static" | $Xsed -e "$delay_single_quote_subst"`'
+old_striplib='`$ECHO "X$old_striplib" | $Xsed -e "$delay_single_quote_subst"`'
+striplib='`$ECHO "X$striplib" | $Xsed -e "$delay_single_quote_subst"`'
+compiler_lib_search_dirs='`$ECHO "X$compiler_lib_search_dirs" | $Xsed -e "$delay_single_quote_subst"`'
+predep_objects='`$ECHO "X$predep_objects" | $Xsed -e "$delay_single_quote_subst"`'
+postdep_objects='`$ECHO "X$postdep_objects" | $Xsed -e "$delay_single_quote_subst"`'
+predeps='`$ECHO "X$predeps" | $Xsed -e "$delay_single_quote_subst"`'
+postdeps='`$ECHO "X$postdeps" | $Xsed -e "$delay_single_quote_subst"`'
+compiler_lib_search_path='`$ECHO "X$compiler_lib_search_path" | $Xsed -e "$delay_single_quote_subst"`'
+LD_CXX='`$ECHO "X$LD_CXX" | $Xsed -e "$delay_single_quote_subst"`'
+old_archive_cmds_CXX='`$ECHO "X$old_archive_cmds_CXX" | $Xsed -e "$delay_single_quote_subst"`'
+compiler_CXX='`$ECHO "X$compiler_CXX" | $Xsed -e "$delay_single_quote_subst"`'
+GCC_CXX='`$ECHO "X$GCC_CXX" | $Xsed -e "$delay_single_quote_subst"`'
+lt_prog_compiler_no_builtin_flag_CXX='`$ECHO "X$lt_prog_compiler_no_builtin_flag_CXX" | $Xsed -e "$delay_single_quote_subst"`'
+lt_prog_compiler_wl_CXX='`$ECHO "X$lt_prog_compiler_wl_CXX" | $Xsed -e "$delay_single_quote_subst"`'
+lt_prog_compiler_pic_CXX='`$ECHO "X$lt_prog_compiler_pic_CXX" | $Xsed -e "$delay_single_quote_subst"`'
+lt_prog_compiler_static_CXX='`$ECHO "X$lt_prog_compiler_static_CXX" | $Xsed -e "$delay_single_quote_subst"`'
+lt_cv_prog_compiler_c_o_CXX='`$ECHO "X$lt_cv_prog_compiler_c_o_CXX" | $Xsed -e "$delay_single_quote_subst"`'
+archive_cmds_need_lc_CXX='`$ECHO "X$archive_cmds_need_lc_CXX" | $Xsed -e "$delay_single_quote_subst"`'
+enable_shared_with_static_runtimes_CXX='`$ECHO "X$enable_shared_with_static_runtimes_CXX" | $Xsed -e "$delay_single_quote_subst"`'
+export_dynamic_flag_spec_CXX='`$ECHO "X$export_dynamic_flag_spec_CXX" | $Xsed -e "$delay_single_quote_subst"`'
+whole_archive_flag_spec_CXX='`$ECHO "X$whole_archive_flag_spec_CXX" | $Xsed -e "$delay_single_quote_subst"`'
+compiler_needs_object_CXX='`$ECHO "X$compiler_needs_object_CXX" | $Xsed -e "$delay_single_quote_subst"`'
+old_archive_from_new_cmds_CXX='`$ECHO "X$old_archive_from_new_cmds_CXX" | $Xsed -e "$delay_single_quote_subst"`'
+old_archive_from_expsyms_cmds_CXX='`$ECHO "X$old_archive_from_expsyms_cmds_CXX" | $Xsed -e "$delay_single_quote_subst"`'
+archive_cmds_CXX='`$ECHO "X$archive_cmds_CXX" | $Xsed -e "$delay_single_quote_subst"`'
+archive_expsym_cmds_CXX='`$ECHO "X$archive_expsym_cmds_CXX" | $Xsed -e "$delay_single_quote_subst"`'
+module_cmds_CXX='`$ECHO "X$module_cmds_CXX" | $Xsed -e "$delay_single_quote_subst"`'
+module_expsym_cmds_CXX='`$ECHO "X$module_expsym_cmds_CXX" | $Xsed -e "$delay_single_quote_subst"`'
+with_gnu_ld_CXX='`$ECHO "X$with_gnu_ld_CXX" | $Xsed -e "$delay_single_quote_subst"`'
+allow_undefined_flag_CXX='`$ECHO "X$allow_undefined_flag_CXX" | $Xsed -e "$delay_single_quote_subst"`'
+no_undefined_flag_CXX='`$ECHO "X$no_undefined_flag_CXX" | $Xsed -e "$delay_single_quote_subst"`'
+hardcode_libdir_flag_spec_CXX='`$ECHO "X$hardcode_libdir_flag_spec_CXX" | $Xsed -e "$delay_single_quote_subst"`'
+hardcode_libdir_flag_spec_ld_CXX='`$ECHO "X$hardcode_libdir_flag_spec_ld_CXX" | $Xsed -e "$delay_single_quote_subst"`'
+hardcode_libdir_separator_CXX='`$ECHO "X$hardcode_libdir_separator_CXX" | $Xsed -e "$delay_single_quote_subst"`'
+hardcode_direct_CXX='`$ECHO "X$hardcode_direct_CXX" | $Xsed -e "$delay_single_quote_subst"`'
+hardcode_direct_absolute_CXX='`$ECHO "X$hardcode_direct_absolute_CXX" | $Xsed -e "$delay_single_quote_subst"`'
+hardcode_minus_L_CXX='`$ECHO "X$hardcode_minus_L_CXX" | $Xsed -e "$delay_single_quote_subst"`'
+hardcode_shlibpath_var_CXX='`$ECHO "X$hardcode_shlibpath_var_CXX" | $Xsed -e "$delay_single_quote_subst"`'
+hardcode_automatic_CXX='`$ECHO "X$hardcode_automatic_CXX" | $Xsed -e "$delay_single_quote_subst"`'
+inherit_rpath_CXX='`$ECHO "X$inherit_rpath_CXX" | $Xsed -e "$delay_single_quote_subst"`'
+link_all_deplibs_CXX='`$ECHO "X$link_all_deplibs_CXX" | $Xsed -e "$delay_single_quote_subst"`'
+fix_srcfile_path_CXX='`$ECHO "X$fix_srcfile_path_CXX" | $Xsed -e "$delay_single_quote_subst"`'
+always_export_symbols_CXX='`$ECHO "X$always_export_symbols_CXX" | $Xsed -e "$delay_single_quote_subst"`'
+export_symbols_cmds_CXX='`$ECHO "X$export_symbols_cmds_CXX" | $Xsed -e "$delay_single_quote_subst"`'
+exclude_expsyms_CXX='`$ECHO "X$exclude_expsyms_CXX" | $Xsed -e "$delay_single_quote_subst"`'
+include_expsyms_CXX='`$ECHO "X$include_expsyms_CXX" | $Xsed -e "$delay_single_quote_subst"`'
+prelink_cmds_CXX='`$ECHO "X$prelink_cmds_CXX" | $Xsed -e "$delay_single_quote_subst"`'
+file_list_spec_CXX='`$ECHO "X$file_list_spec_CXX" | $Xsed -e "$delay_single_quote_subst"`'
+hardcode_action_CXX='`$ECHO "X$hardcode_action_CXX" | $Xsed -e "$delay_single_quote_subst"`'
+compiler_lib_search_dirs_CXX='`$ECHO "X$compiler_lib_search_dirs_CXX" | $Xsed -e "$delay_single_quote_subst"`'
+predep_objects_CXX='`$ECHO "X$predep_objects_CXX" | $Xsed -e "$delay_single_quote_subst"`'
+postdep_objects_CXX='`$ECHO "X$postdep_objects_CXX" | $Xsed -e "$delay_single_quote_subst"`'
+predeps_CXX='`$ECHO "X$predeps_CXX" | $Xsed -e "$delay_single_quote_subst"`'
+postdeps_CXX='`$ECHO "X$postdeps_CXX" | $Xsed -e "$delay_single_quote_subst"`'
+compiler_lib_search_path_CXX='`$ECHO "X$compiler_lib_search_path_CXX" | $Xsed -e "$delay_single_quote_subst"`'
+
+LTCC='$LTCC'
+LTCFLAGS='$LTCFLAGS'
+compiler='$compiler_DEFAULT'
+
+# Quote evaled strings.
+for var in SED \
+GREP \
+EGREP \
+FGREP \
+LD \
+NM \
+LN_S \
+lt_SP2NL \
+lt_NL2SP \
+reload_flag \
+deplibs_check_method \
+file_magic_cmd \
+AR \
+AR_FLAGS \
+STRIP \
+RANLIB \
+CC \
+CFLAGS \
+compiler \
+lt_cv_sys_global_symbol_pipe \
+lt_cv_sys_global_symbol_to_cdecl \
+lt_cv_sys_global_symbol_to_c_name_address \
+lt_cv_sys_global_symbol_to_c_name_address_lib_prefix \
+SHELL \
+ECHO \
+lt_prog_compiler_no_builtin_flag \
+lt_prog_compiler_wl \
+lt_prog_compiler_pic \
+lt_prog_compiler_static \
+lt_cv_prog_compiler_c_o \
+need_locks \
+DSYMUTIL \
+NMEDIT \
+LIPO \
+OTOOL \
+OTOOL64 \
+shrext_cmds \
+export_dynamic_flag_spec \
+whole_archive_flag_spec \
+compiler_needs_object \
+with_gnu_ld \
+allow_undefined_flag \
+no_undefined_flag \
+hardcode_libdir_flag_spec \
+hardcode_libdir_flag_spec_ld \
+hardcode_libdir_separator \
+fix_srcfile_path \
+exclude_expsyms \
+include_expsyms \
+file_list_spec \
+variables_saved_for_relink \
+libname_spec \
+library_names_spec \
+soname_spec \
+finish_eval \
+old_striplib \
+striplib \
+compiler_lib_search_dirs \
+predep_objects \
+postdep_objects \
+predeps \
+postdeps \
+compiler_lib_search_path \
+LD_CXX \
+compiler_CXX \
+lt_prog_compiler_no_builtin_flag_CXX \
+lt_prog_compiler_wl_CXX \
+lt_prog_compiler_pic_CXX \
+lt_prog_compiler_static_CXX \
+lt_cv_prog_compiler_c_o_CXX \
+export_dynamic_flag_spec_CXX \
+whole_archive_flag_spec_CXX \
+compiler_needs_object_CXX \
+with_gnu_ld_CXX \
+allow_undefined_flag_CXX \
+no_undefined_flag_CXX \
+hardcode_libdir_flag_spec_CXX \
+hardcode_libdir_flag_spec_ld_CXX \
+hardcode_libdir_separator_CXX \
+fix_srcfile_path_CXX \
+exclude_expsyms_CXX \
+include_expsyms_CXX \
+file_list_spec_CXX \
+compiler_lib_search_dirs_CXX \
+predep_objects_CXX \
+postdep_objects_CXX \
+predeps_CXX \
+postdeps_CXX \
+compiler_lib_search_path_CXX; do
+    case \`eval \\\\\$ECHO "X\\\\\$\$var"\` in
+    *[\\\\\\\`\\"\\\$]*)
+      eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"X\\\$\$var\\" | \\\$Xsed -e \\"\\\$sed_quote_subst\\"\\\`\\\\\\""
+      ;;
+    *)
+      eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
+      ;;
+    esac
 done
 
-{ $as_echo "$as_me:$LINENO: checking types of arguments for select" >&5
-$as_echo_n "checking types of arguments for select... " >&6; }
-if test "${ac_cv_func_select_args+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
-  for ac_arg234 in 'fd_set *' 'int *' 'void *'; do
- for ac_arg1 in 'int' 'size_t' 'unsigned long int' 'unsigned int'; do
-  for ac_arg5 in 'struct timeval *' 'const struct timeval *'; do
-   cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-$ac_includes_default
-#ifdef HAVE_SYS_SELECT_H
-# include <sys/select.h>
-#endif
-#ifdef HAVE_SYS_SOCKET_H
-# include <sys/socket.h>
-#endif
+# Double-quote double-evaled strings.
+for var in reload_cmds \
+old_postinstall_cmds \
+old_postuninstall_cmds \
+old_archive_cmds \
+extract_expsyms_cmds \
+old_archive_from_new_cmds \
+old_archive_from_expsyms_cmds \
+archive_cmds \
+archive_expsym_cmds \
+module_cmds \
+module_expsym_cmds \
+export_symbols_cmds \
+prelink_cmds \
+postinstall_cmds \
+postuninstall_cmds \
+finish_cmds \
+sys_lib_search_path_spec \
+sys_lib_dlsearch_path_spec \
+old_archive_cmds_CXX \
+old_archive_from_new_cmds_CXX \
+old_archive_from_expsyms_cmds_CXX \
+archive_cmds_CXX \
+archive_expsym_cmds_CXX \
+module_cmds_CXX \
+module_expsym_cmds_CXX \
+export_symbols_cmds_CXX \
+prelink_cmds_CXX; do
+    case \`eval \\\\\$ECHO "X\\\\\$\$var"\` in
+    *[\\\\\\\`\\"\\\$]*)
+      eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"X\\\$\$var\\" | \\\$Xsed -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\""
+      ;;
+    *)
+      eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
+      ;;
+    esac
+done
 
-int
-main ()
-{
-extern int select ($ac_arg1,
-					    $ac_arg234, $ac_arg234, $ac_arg234,
-					    $ac_arg5);
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
+# Fix-up fallback echo if it was mangled by the above quoting rules.
+case \$lt_ECHO in
+*'\\\$0 --fallback-echo"')  lt_ECHO=\`\$ECHO "X\$lt_ECHO" | \$Xsed -e 's/\\\\\\\\\\\\\\\$0 --fallback-echo"\$/\$0 --fallback-echo"/'\`
+  ;;
 esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_compile") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest.$ac_objext; then
-  ac_cv_func_select_args="$ac_arg1,$ac_arg234,$ac_arg5"; break 3
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
 
+ac_aux_dir='$ac_aux_dir'
+xsi_shell='$xsi_shell'
+lt_shell_append='$lt_shell_append'
 
+# See if we are running on zsh, and set the options which allow our
+# commands through without removal of \ escapes INIT.
+if test -n "\${ZSH_VERSION+set}" ; then
+   setopt NO_GLOB_SUBST
 fi
 
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-  done
- done
-done
-# Provide a safe default value.
-: ${ac_cv_func_select_args='int,int *,struct timeval *'}
 
-fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_func_select_args" >&5
-$as_echo "$ac_cv_func_select_args" >&6; }
-ac_save_IFS=$IFS; IFS=','
-set dummy `echo "$ac_cv_func_select_args" | sed 's/\*/\*/g'`
-IFS=$ac_save_IFS
-shift
+    PACKAGE='$PACKAGE'
+    VERSION='$VERSION'
+    TIMESTAMP='$TIMESTAMP'
+    RM='$RM'
+    ofile='$ofile'
 
-cat >>confdefs.h <<_ACEOF
-#define SELECT_TYPE_ARG1 $1
-_ACEOF
 
 
-cat >>confdefs.h <<_ACEOF
-#define SELECT_TYPE_ARG234 ($2)
-_ACEOF
 
 
-cat >>confdefs.h <<_ACEOF
-#define SELECT_TYPE_ARG5 ($3)
-_ACEOF
 
-rm -f conftest*
+_ACEOF
 
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
 
-for ac_func in vprintf
+# Handling of arguments.
+for ac_config_target in $ac_config_targets
 do
-as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh`
-{ $as_echo "$as_me:$LINENO: checking for $ac_func" >&5
-$as_echo_n "checking for $ac_func... " >&6; }
-if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then
-  $as_echo_n "(cached) " >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-/* Define $ac_func to an innocuous variant, in case <limits.h> declares $ac_func.
-   For example, HP-UX 11i <limits.h> declares gettimeofday.  */
-#define $ac_func innocuous_$ac_func
-
-/* System header to define __stub macros and hopefully few prototypes,
-    which can conflict with char $ac_func (); below.
-    Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-    <limits.h> exists even on freestanding compilers.  */
+  case $ac_config_target in
+    "ode/src/config.h") CONFIG_HEADERS="$CONFIG_HEADERS ode/src/config.h" ;;
+    "depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;;
+    "libtool") CONFIG_COMMANDS="$CONFIG_COMMANDS libtool" ;;
+    "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;;
+    "include/Makefile") CONFIG_FILES="$CONFIG_FILES include/Makefile" ;;
+    "include/ode/Makefile") CONFIG_FILES="$CONFIG_FILES include/ode/Makefile" ;;
+    "include/drawstuff/Makefile") CONFIG_FILES="$CONFIG_FILES include/drawstuff/Makefile" ;;
+    "ode/Makefile") CONFIG_FILES="$CONFIG_FILES ode/Makefile" ;;
+    "ode/src/Makefile") CONFIG_FILES="$CONFIG_FILES ode/src/Makefile" ;;
+    "ode/src/joints/Makefile") CONFIG_FILES="$CONFIG_FILES ode/src/joints/Makefile" ;;
+    "drawstuff/Makefile") CONFIG_FILES="$CONFIG_FILES drawstuff/Makefile" ;;
+    "drawstuff/src/Makefile") CONFIG_FILES="$CONFIG_FILES drawstuff/src/Makefile" ;;
+    "drawstuff/dstest/Makefile") CONFIG_FILES="$CONFIG_FILES drawstuff/dstest/Makefile" ;;
+    "ode/demo/Makefile") CONFIG_FILES="$CONFIG_FILES ode/demo/Makefile" ;;
+    "OPCODE/Makefile") CONFIG_FILES="$CONFIG_FILES OPCODE/Makefile" ;;
+    "OPCODE/Ice/Makefile") CONFIG_FILES="$CONFIG_FILES OPCODE/Ice/Makefile" ;;
+    "GIMPACT/Makefile") CONFIG_FILES="$CONFIG_FILES GIMPACT/Makefile" ;;
+    "GIMPACT/include/Makefile") CONFIG_FILES="$CONFIG_FILES GIMPACT/include/Makefile" ;;
+    "GIMPACT/include/GIMPACT/Makefile") CONFIG_FILES="$CONFIG_FILES GIMPACT/include/GIMPACT/Makefile" ;;
+    "GIMPACT/src/Makefile") CONFIG_FILES="$CONFIG_FILES GIMPACT/src/Makefile" ;;
+    "tests/Makefile") CONFIG_FILES="$CONFIG_FILES tests/Makefile" ;;
+    "tests/UnitTest++/Makefile") CONFIG_FILES="$CONFIG_FILES tests/UnitTest++/Makefile" ;;
+    "tests/UnitTest++/src/Makefile") CONFIG_FILES="$CONFIG_FILES tests/UnitTest++/src/Makefile" ;;
+    "tests/UnitTest++/src/Posix/Makefile") CONFIG_FILES="$CONFIG_FILES tests/UnitTest++/src/Posix/Makefile" ;;
+    "tests/UnitTest++/src/Win32/Makefile") CONFIG_FILES="$CONFIG_FILES tests/UnitTest++/src/Win32/Makefile" ;;
+    "ode-config") CONFIG_FILES="$CONFIG_FILES ode-config" ;;
+    "ode.pc") CONFIG_FILES="$CONFIG_FILES ode.pc" ;;
 
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
+  *) as_fn_error "invalid argument: \`$ac_config_target'" "$LINENO" 5;;
+  esac
+done
 
-#undef $ac_func
 
-/* Override any GCC internal prototype to avoid an error.
-   Use char because int might match the return type of a GCC
-   builtin and then its argument prototype would still apply.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-char $ac_func ();
-/* The GNU C library defines this for functions which it implements
-    to always fail with ENOSYS.  Some functions are actually named
-    something starting with __ and the normal name is an alias.  */
-#if defined __stub_$ac_func || defined __stub___$ac_func
-choke me
-#endif
+# If the user did not use the arguments to specify the items to instantiate,
+# then the envvar interface is used.  Set only those that are not.
+# We use the long form for the default assignment because of an extremely
+# bizarre bug on SunOS 4.1.3.
+if $ac_need_defaults; then
+  test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files
+  test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers
+  test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands
+fi
 
-int
-main ()
+# Have a temporary directory for convenience.  Make it in the build tree
+# simply because there is no reason against having it here, and in addition,
+# creating and moving files from /tmp can sometimes cause problems.
+# Hook for its removal unless debugging.
+# Note that there is a small window in which the directory will not be cleaned:
+# after its creation but before its name has been assigned to `$tmp'.
+$debug ||
 {
-return $ac_func ();
-  ;
-  return 0;
+  tmp=
+  trap 'exit_status=$?
+  { test -z "$tmp" || test ! -d "$tmp" || rm -fr "$tmp"; } && exit $exit_status
+' 0
+  trap 'as_fn_exit 1' 1 2 13 15
 }
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_link") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest$ac_exeext && {
-	 test "$cross_compiling" = yes ||
-	 $as_test_x conftest$ac_exeext
-       }; then
-  eval "$as_ac_var=yes"
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
+# Create a (secure) tmp directory for tmp files.
+
+{
+  tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` &&
+  test -n "$tmp" && test -d "$tmp"
+}  ||
+{
+  tmp=./conf$$-$RANDOM
+  (umask 077 && mkdir "$tmp")
+} || as_fn_error "cannot create a temporary directory in ." "$LINENO" 5
 
-	eval "$as_ac_var=no"
-fi
+# Set up the scripts for CONFIG_FILES section.
+# No need to generate them if there are no CONFIG_FILES.
+# This happens for instance with `./config.status config.h'.
+if test -n "$CONFIG_FILES"; then
 
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-      conftest$ac_exeext conftest.$ac_ext
-fi
-ac_res=`eval 'as_val=${'$as_ac_var'}
-		 $as_echo "$as_val"'`
-	       { $as_echo "$as_me:$LINENO: result: $ac_res" >&5
-$as_echo "$ac_res" >&6; }
-as_val=`eval 'as_val=${'$as_ac_var'}
-		 $as_echo "$as_val"'`
-   if test "x$as_val" = x""yes; then
-  cat >>confdefs.h <<_ACEOF
-#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1
-_ACEOF
 
-{ $as_echo "$as_me:$LINENO: checking for _doprnt" >&5
-$as_echo_n "checking for _doprnt... " >&6; }
-if test "${ac_cv_func__doprnt+set}" = set; then
-  $as_echo_n "(cached) " >&6
+ac_cr=`echo X | tr X '\015'`
+# On cygwin, bash can eat \r inside `` if the user requested igncr.
+# But we know of no other shell where ac_cr would be empty at this
+# point, so we can use a bashism as a fallback.
+if test "x$ac_cr" = x; then
+  eval ac_cr=\$\'\\r\'
+fi
+ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' </dev/null 2>/dev/null`
+if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then
+  ac_cs_awk_cr='\r'
 else
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
+  ac_cs_awk_cr=$ac_cr
+fi
+
+echo 'BEGIN {' >"$tmp/subs1.awk" &&
 _ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-/* Define _doprnt to an innocuous variant, in case <limits.h> declares _doprnt.
-   For example, HP-UX 11i <limits.h> declares gettimeofday.  */
-#define _doprnt innocuous__doprnt
 
-/* System header to define __stub macros and hopefully few prototypes,
-    which can conflict with char _doprnt (); below.
-    Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-    <limits.h> exists even on freestanding compilers.  */
 
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
+{
+  echo "cat >conf$$subs.awk <<_ACEOF" &&
+  echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' &&
+  echo "_ACEOF"
+} >conf$$subs.sh ||
+  as_fn_error "could not make $CONFIG_STATUS" "$LINENO" 5
+ac_delim_num=`echo "$ac_subst_vars" | grep -c '$'`
+ac_delim='%!_!# '
+for ac_last_try in false false false false false :; do
+  . ./conf$$subs.sh ||
+    as_fn_error "could not make $CONFIG_STATUS" "$LINENO" 5
 
-#undef _doprnt
+  ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X`
+  if test $ac_delim_n = $ac_delim_num; then
+    break
+  elif $ac_last_try; then
+    as_fn_error "could not make $CONFIG_STATUS" "$LINENO" 5
+  else
+    ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
+  fi
+done
+rm -f conf$$subs.sh
 
-/* Override any GCC internal prototype to avoid an error.
-   Use char because int might match the return type of a GCC
-   builtin and then its argument prototype would still apply.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-char _doprnt ();
-/* The GNU C library defines this for functions which it implements
-    to always fail with ENOSYS.  Some functions are actually named
-    something starting with __ and the normal name is an alias.  */
-#if defined __stub__doprnt || defined __stub____doprnt
-choke me
-#endif
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+cat >>"\$tmp/subs1.awk" <<\\_ACAWK &&
+_ACEOF
+sed -n '
+h
+s/^/S["/; s/!.*/"]=/
+p
+g
+s/^[^!]*!//
+:repl
+t repl
+s/'"$ac_delim"'$//
+t delim
+:nl
+h
+s/\(.\{148\}\).*/\1/
+t more1
+s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/
+p
+n
+b repl
+:more1
+s/["\\]/\\&/g; s/^/"/; s/$/"\\/
+p
+g
+s/.\{148\}//
+t nl
+:delim
+h
+s/\(.\{148\}\).*/\1/
+t more2
+s/["\\]/\\&/g; s/^/"/; s/$/"/
+p
+b
+:more2
+s/["\\]/\\&/g; s/^/"/; s/$/"\\/
+p
+g
+s/.\{148\}//
+t delim
+' <conf$$subs.awk | sed '
+/^[^""]/{
+  N
+  s/\n//
+}
+' >>$CONFIG_STATUS || ac_write_fail=1
+rm -f conf$$subs.awk
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+_ACAWK
+cat >>"\$tmp/subs1.awk" <<_ACAWK &&
+  for (key in S) S_is_set[key] = 1
+  FS = ""
 
-int
-main ()
+}
 {
-return _doprnt ();
-  ;
-  return 0;
+  line = $ 0
+  nfields = split(line, field, "@")
+  substed = 0
+  len = length(field[1])
+  for (i = 2; i < nfields; i++) {
+    key = field[i]
+    keylen = length(key)
+    if (S_is_set[key]) {
+      value = S[key]
+      line = substr(line, 1, len) "" value "" substr(line, len + keylen + 3)
+      len += length(value) + length(field[++i])
+      substed = 1
+    } else
+      len += 1 + keylen
+  }
+
+  print line
 }
+
+_ACAWK
 _ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_link") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest$ac_exeext && {
-	 test "$cross_compiling" = yes ||
-	 $as_test_x conftest$ac_exeext
-       }; then
-  ac_cv_func__doprnt=yes
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then
+  sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g"
 else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
+  cat
+fi < "$tmp/subs1.awk" > "$tmp/subs.awk" \
+  || as_fn_error "could not setup config files machinery" "$LINENO" 5
+_ACEOF
 
-	ac_cv_func__doprnt=no
+# VPATH may cause trouble with some makes, so we remove $(srcdir),
+# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and
+# trailing colons and then remove the whole line if VPATH becomes empty
+# (actually we leave an empty line to preserve line numbers).
+if test "x$srcdir" = x.; then
+  ac_vpsub='/^[	 ]*VPATH[	 ]*=/{
+s/:*\$(srcdir):*/:/
+s/:*\${srcdir}:*/:/
+s/:*@srcdir@:*/:/
+s/^\([^=]*=[	 ]*\):*/\1/
+s/:*$//
+s/^[^=]*=[	 ]*$//
+}'
 fi
 
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-      conftest$ac_exeext conftest.$ac_ext
-fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_func__doprnt" >&5
-$as_echo "$ac_cv_func__doprnt" >&6; }
-if test "x$ac_cv_func__doprnt" = x""yes; then
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+fi # test -n "$CONFIG_FILES"
+
+# Set up the scripts for CONFIG_HEADERS section.
+# No need to generate them if there are no CONFIG_HEADERS.
+# This happens for instance with `./config.status Makefile'.
+if test -n "$CONFIG_HEADERS"; then
+cat >"$tmp/defines.awk" <<\_ACAWK ||
+BEGIN {
+_ACEOF
+
+# Transform confdefs.h into an awk script `defines.awk', embedded as
+# here-document in config.status, that substitutes the proper values into
+# config.h.in to produce config.h.
+
+# Create a delimiter string that does not exist in confdefs.h, to ease
+# handling of long lines.
+ac_delim='%!_!# '
+for ac_last_try in false false :; do
+  ac_t=`sed -n "/$ac_delim/p" confdefs.h`
+  if test -z "$ac_t"; then
+    break
+  elif $ac_last_try; then
+    as_fn_error "could not make $CONFIG_HEADERS" "$LINENO" 5
+  else
+    ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
+  fi
+done
+
+# For the awk script, D is an array of macro values keyed by name,
+# likewise P contains macro parameters if any.  Preserve backslash
+# newline sequences.
+
+ac_word_re=[_$as_cr_Letters][_$as_cr_alnum]*
+sed -n '
+s/.\{148\}/&'"$ac_delim"'/g
+t rset
+:rset
+s/^[	 ]*#[	 ]*define[	 ][	 ]*/ /
+t def
+d
+:def
+s/\\$//
+t bsnl
+s/["\\]/\\&/g
+s/^ \('"$ac_word_re"'\)\(([^()]*)\)[	 ]*\(.*\)/P["\1"]="\2"\
+D["\1"]=" \3"/p
+s/^ \('"$ac_word_re"'\)[	 ]*\(.*\)/D["\1"]=" \2"/p
+d
+:bsnl
+s/["\\]/\\&/g
+s/^ \('"$ac_word_re"'\)\(([^()]*)\)[	 ]*\(.*\)/P["\1"]="\2"\
+D["\1"]=" \3\\\\\\n"\\/p
+t cont
+s/^ \('"$ac_word_re"'\)[	 ]*\(.*\)/D["\1"]=" \2\\\\\\n"\\/p
+t cont
+d
+:cont
+n
+s/.\{148\}/&'"$ac_delim"'/g
+t clear
+:clear
+s/\\$//
+t bsnlc
+s/["\\]/\\&/g; s/^/"/; s/$/"/p
+d
+:bsnlc
+s/["\\]/\\&/g; s/^/"/; s/$/\\\\\\n"\\/p
+b cont
+' <confdefs.h | sed '
+s/'"$ac_delim"'/"\\\
+"/g' >>$CONFIG_STATUS || ac_write_fail=1
 
-cat >>confdefs.h <<\_ACEOF
-#define HAVE_DOPRNT 1
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+  for (key in D) D_is_set[key] = 1
+  FS = ""
+}
+/^[\t ]*#[\t ]*(define|undef)[\t ]+$ac_word_re([\t (]|\$)/ {
+  line = \$ 0
+  split(line, arg, " ")
+  if (arg[1] == "#") {
+    defundef = arg[2]
+    mac1 = arg[3]
+  } else {
+    defundef = substr(arg[1], 2)
+    mac1 = arg[2]
+  }
+  split(mac1, mac2, "(") #)
+  macro = mac2[1]
+  prefix = substr(line, 1, index(line, defundef) - 1)
+  if (D_is_set[macro]) {
+    # Preserve the white space surrounding the "#".
+    print prefix "define", macro P[macro] D[macro]
+    next
+  } else {
+    # Replace #undef with comments.  This is necessary, for example,
+    # in the case of _POSIX_SOURCE, which is predefined and required
+    # on some systems where configure will not decide to define it.
+    if (defundef == "undef") {
+      print "/*", prefix defundef, macro, "*/"
+      next
+    }
+  }
+}
+{ print }
+_ACAWK
 _ACEOF
-
-fi
-
-fi
-done
-
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+  as_fn_error "could not setup config headers machinery" "$LINENO" 5
+fi # test -n "$CONFIG_HEADERS"
 
 
-{ $as_echo "$as_me:$LINENO: checking if alloca should be emulated by malloc" >&5
-$as_echo_n "checking if alloca should be emulated by malloc... " >&6; }
-# Check whether --enable-malloc was given.
-if test "${enable_malloc+set}" = set; then
-  enableval=$enable_malloc; usemalloc=$enableval
-else
-  usemalloc=no
-fi
+eval set X "  :F $CONFIG_FILES  :H $CONFIG_HEADERS    :C $CONFIG_COMMANDS"
+shift
+for ac_tag
+do
+  case $ac_tag in
+  :[FHLC]) ac_mode=$ac_tag; continue;;
+  esac
+  case $ac_mode$ac_tag in
+  :[FHL]*:*);;
+  :L* | :C*:*) as_fn_error "invalid tag \`$ac_tag'" "$LINENO" 5;;
+  :[FH]-) ac_tag=-:-;;
+  :[FH]*) ac_tag=$ac_tag:$ac_tag.in;;
+  esac
+  ac_save_IFS=$IFS
+  IFS=:
+  set x $ac_tag
+  IFS=$ac_save_IFS
+  shift
+  ac_file=$1
+  shift
 
-if test "$usemalloc" != no
-then
+  case $ac_mode in
+  :L) ac_source=$1;;
+  :[FH])
+    ac_file_inputs=
+    for ac_f
+    do
+      case $ac_f in
+      -) ac_f="$tmp/stdin";;
+      *) # Look for the file first in the build tree, then in the source tree
+	 # (if the path is not absolute).  The absolute path cannot be DOS-style,
+	 # because $ac_f cannot contain `:'.
+	 test -f "$ac_f" ||
+	   case $ac_f in
+	   [\\/$]*) false;;
+	   *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";;
+	   esac ||
+	   as_fn_error "cannot find input file: \`$ac_f'" "$LINENO" 5;;
+      esac
+      case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac
+      as_fn_append ac_file_inputs " '$ac_f'"
+    done
 
-cat >>confdefs.h <<\_ACEOF
-#define dUSE_MALLOC_FOR_ALLOCA 1
-_ACEOF
+    # Let's still pretend it is `configure' which instantiates (i.e., don't
+    # use $as_me), people would be surprised to read:
+    #    /* config.h.  Generated by config.status.  */
+    configure_input='Generated from '`
+	  $as_echo "$*" | sed 's|^[^:]*/||;s|:[^:]*/|, |g'
+	`' by configure.'
+    if test x"$ac_file" != x-; then
+      configure_input="$ac_file.  $configure_input"
+      { $as_echo "$as_me:${as_lineno-$LINENO}: creating $ac_file" >&5
+$as_echo "$as_me: creating $ac_file" >&6;}
+    fi
+    # Neutralize special characters interpreted by sed in replacement strings.
+    case $configure_input in #(
+    *\&* | *\|* | *\\* )
+       ac_sed_conf_input=`$as_echo "$configure_input" |
+       sed 's/[\\\\&|]/\\\\&/g'`;; #(
+    *) ac_sed_conf_input=$configure_input;;
+    esac
 
-    { $as_echo "$as_me:$LINENO: result: $usemalloc" >&5
-$as_echo "$usemalloc" >&6; }
-else
-    { $as_echo "$as_me:$LINENO: result: no" >&5
-$as_echo "no" >&6; }
-fi
+    case $ac_tag in
+    *:-:* | *:-) cat >"$tmp/stdin" \
+      || as_fn_error "could not create $ac_file" "$LINENO" 5 ;;
+    esac
+    ;;
+  esac
 
-# Check whether --enable-ou was given.
-if test "${enable_ou+set}" = set; then
-  enableval=$enable_ou; use_ou=$enableval
-else
-  use_ou=no
-fi
+  ac_dir=`$as_dirname -- "$ac_file" ||
+$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$ac_file" : 'X\(//\)[^/]' \| \
+	 X"$ac_file" : 'X\(//\)$' \| \
+	 X"$ac_file" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$ac_file" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+  as_dir="$ac_dir"; as_fn_mkdir_p
+  ac_builddir=.
 
-if test x$use_ou = xyes
-then
-    OU_NAMESPACE=odeou
+case "$ac_dir" in
+.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
+*)
+  ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
+  # A ".." for each directory in $ac_dir_suffix.
+  ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
+  case $ac_top_builddir_sub in
+  "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
+  *)  ac_top_build_prefix=$ac_top_builddir_sub/ ;;
+  esac ;;
+esac
+ac_abs_top_builddir=$ac_pwd
+ac_abs_builddir=$ac_pwd$ac_dir_suffix
+# for backward compatibility:
+ac_top_builddir=$ac_top_build_prefix
 
+case $srcdir in
+  .)  # We are building in place.
+    ac_srcdir=.
+    ac_top_srcdir=$ac_top_builddir_sub
+    ac_abs_top_srcdir=$ac_pwd ;;
+  [\\/]* | ?:[\\/]* )  # Absolute name.
+    ac_srcdir=$srcdir$ac_dir_suffix;
+    ac_top_srcdir=$srcdir
+    ac_abs_top_srcdir=$srcdir ;;
+  *) # Relative name.
+    ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
+    ac_top_srcdir=$ac_top_build_prefix$srcdir
+    ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
+esac
+ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
 
-cat >>confdefs.h <<\_ACEOF
-#define _OU_NAMESPACE odeou
-_ACEOF
 
+  case $ac_mode in
+  :F)
+  #
+  # CONFIG_FILE
+  #
 
-cat >>confdefs.h <<\_ACEOF
-#define dOU_ENABLED 1
+  case $INSTALL in
+  [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;;
+  *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;;
+  esac
+  ac_MKDIR_P=$MKDIR_P
+  case $MKDIR_P in
+  [\\/$]* | ?:[\\/]* ) ;;
+  */*) ac_MKDIR_P=$ac_top_build_prefix$MKDIR_P ;;
+  esac
 _ACEOF
 
-
-cat >>confdefs.h <<\_ACEOF
-#define dATOMICS_ENABLED 1
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+# If the template does not know about datarootdir, expand it.
+# FIXME: This hack should be removed a few years after 2.60.
+ac_datarootdir_hack=; ac_datarootdir_seen=
+ac_sed_dataroot='
+/datarootdir/ {
+  p
+  q
+}
+/@datadir@/p
+/@docdir@/p
+/@infodir@/p
+/@localedir@/p
+/@mandir@/p'
+case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in
+*datarootdir*) ac_datarootdir_seen=yes;;
+*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*)
+  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5
+$as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;}
 _ACEOF
-
-
-cat >>confdefs.h <<\_ACEOF
-#define dTLS_ENABLED 1
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+  ac_datarootdir_hack='
+  s&@datadir@&$datadir&g
+  s&@docdir@&$docdir&g
+  s&@infodir@&$infodir&g
+  s&@localedir@&$localedir&g
+  s&@mandir@&$mandir&g
+  s&\\\${datarootdir}&$datarootdir&g' ;;
+esac
 _ACEOF
 
-
-    case "$host_os" in
-      cygwin* | mingw*)
-        targetos=_OU_TARGET_OS_WINDOWS
-        ;;
-      *qnx*)
-        targetos=_OU_TARGET_OS_QNX
-        ;;
-      *apple* | *darwin*)
-        targetos=_OU_TARGET_OS_MAC
-        ;;
-      *sunos*)
-        targetos=_OU_TARGET_OS_SUNOS
-        ;;
-      *aix*)
-        targetos=_OU_TARGET_OS_AIX
-        ;;
-      *)
-        targetos=_OU_TARGET_OS_GENUNIX
-        ;;
-    esac
-
-    if test $targetos = _OU_TARGET_OS_MAC
-    then
-        MAC_OS_X_VERSION=1000
-        { $as_echo "$as_me:$LINENO: checking for OSAtomicAdd32Barrier" >&5
-$as_echo_n "checking for OSAtomicAdd32Barrier... " >&6; }
-if test "${ac_cv_func_OSAtomicAdd32Barrier+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
+# Neutralize VPATH when `$srcdir' = `.'.
+# Shell code in configure.ac might set extrasub.
+# FIXME: do we really want to maintain this feature?
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+ac_sed_extra="$ac_vpsub
+$extrasub
 _ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-/* Define OSAtomicAdd32Barrier to an innocuous variant, in case <limits.h> declares OSAtomicAdd32Barrier.
-   For example, HP-UX 11i <limits.h> declares gettimeofday.  */
-#define OSAtomicAdd32Barrier innocuous_OSAtomicAdd32Barrier
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+:t
+/@[a-zA-Z_][a-zA-Z_0-9]*@/!b
+s|@configure_input@|$ac_sed_conf_input|;t t
+s&@top_builddir@&$ac_top_builddir_sub&;t t
+s&@top_build_prefix@&$ac_top_build_prefix&;t t
+s&@srcdir@&$ac_srcdir&;t t
+s&@abs_srcdir@&$ac_abs_srcdir&;t t
+s&@top_srcdir@&$ac_top_srcdir&;t t
+s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t
+s&@builddir@&$ac_builddir&;t t
+s&@abs_builddir@&$ac_abs_builddir&;t t
+s&@abs_top_builddir@&$ac_abs_top_builddir&;t t
+s&@INSTALL@&$ac_INSTALL&;t t
+s&@MKDIR_P@&$ac_MKDIR_P&;t t
+$ac_datarootdir_hack
+"
+eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$tmp/subs.awk" >$tmp/out \
+  || as_fn_error "could not create $ac_file" "$LINENO" 5
 
-/* System header to define __stub macros and hopefully few prototypes,
-    which can conflict with char OSAtomicAdd32Barrier (); below.
-    Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-    <limits.h> exists even on freestanding compilers.  */
+test -z "$ac_datarootdir_hack$ac_datarootdir_seen" &&
+  { ac_out=`sed -n '/\${datarootdir}/p' "$tmp/out"`; test -n "$ac_out"; } &&
+  { ac_out=`sed -n '/^[	 ]*datarootdir[	 ]*:*=/p' "$tmp/out"`; test -z "$ac_out"; } &&
+  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a reference to the variable \`datarootdir'
+which seems to be undefined.  Please make sure it is defined." >&5
+$as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir'
+which seems to be undefined.  Please make sure it is defined." >&2;}
 
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
+  rm -f "$tmp/stdin"
+  case $ac_file in
+  -) cat "$tmp/out" && rm -f "$tmp/out";;
+  *) rm -f "$ac_file" && mv "$tmp/out" "$ac_file";;
+  esac \
+  || as_fn_error "could not create $ac_file" "$LINENO" 5
+ ;;
+  :H)
+  #
+  # CONFIG_HEADER
+  #
+  if test x"$ac_file" != x-; then
+    {
+      $as_echo "/* $configure_input  */" \
+      && eval '$AWK -f "$tmp/defines.awk"' "$ac_file_inputs"
+    } >"$tmp/config.h" \
+      || as_fn_error "could not create $ac_file" "$LINENO" 5
+    if diff "$ac_file" "$tmp/config.h" >/dev/null 2>&1; then
+      { $as_echo "$as_me:${as_lineno-$LINENO}: $ac_file is unchanged" >&5
+$as_echo "$as_me: $ac_file is unchanged" >&6;}
+    else
+      rm -f "$ac_file"
+      mv "$tmp/config.h" "$ac_file" \
+	|| as_fn_error "could not create $ac_file" "$LINENO" 5
+    fi
+  else
+    $as_echo "/* $configure_input  */" \
+      && eval '$AWK -f "$tmp/defines.awk"' "$ac_file_inputs" \
+      || as_fn_error "could not create -" "$LINENO" 5
+  fi
+# Compute "$ac_file"'s index in $config_headers.
+_am_arg="$ac_file"
+_am_stamp_count=1
+for _am_header in $config_headers :; do
+  case $_am_header in
+    $_am_arg | $_am_arg:* )
+      break ;;
+    * )
+      _am_stamp_count=`expr $_am_stamp_count + 1` ;;
+  esac
+done
+echo "timestamp for $_am_arg" >`$as_dirname -- "$_am_arg" ||
+$as_expr X"$_am_arg" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$_am_arg" : 'X\(//\)[^/]' \| \
+	 X"$_am_arg" : 'X\(//\)$' \| \
+	 X"$_am_arg" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$_am_arg" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`/stamp-h$_am_stamp_count
+ ;;
 
-#undef OSAtomicAdd32Barrier
+  :C)  { $as_echo "$as_me:${as_lineno-$LINENO}: executing $ac_file commands" >&5
+$as_echo "$as_me: executing $ac_file commands" >&6;}
+ ;;
+  esac
 
-/* Override any GCC internal prototype to avoid an error.
-   Use char because int might match the return type of a GCC
-   builtin and then its argument prototype would still apply.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-char OSAtomicAdd32Barrier ();
-/* The GNU C library defines this for functions which it implements
-    to always fail with ENOSYS.  Some functions are actually named
-    something starting with __ and the normal name is an alias.  */
-#if defined __stub_OSAtomicAdd32Barrier || defined __stub___OSAtomicAdd32Barrier
-choke me
-#endif
 
-int
-main ()
-{
-return OSAtomicAdd32Barrier ();
-  ;
-  return 0;
+  case $ac_file$ac_mode in
+    "depfiles":C) test x"$AMDEP_TRUE" != x"" || {
+  # Autoconf 2.62 quotes --file arguments for eval, but not when files
+  # are listed without --file.  Let's play safe and only enable the eval
+  # if we detect the quoting.
+  case $CONFIG_FILES in
+  *\'*) eval set x "$CONFIG_FILES" ;;
+  *)   set x $CONFIG_FILES ;;
+  esac
+  shift
+  for mf
+  do
+    # Strip MF so we end up with the name of the file.
+    mf=`echo "$mf" | sed -e 's/:.*$//'`
+    # Check whether this is an Automake generated Makefile or not.
+    # We used to match only the files named `Makefile.in', but
+    # some people rename them; so instead we look at the file content.
+    # Grep'ing the first line is not enough: some people post-process
+    # each Makefile.in and add a new line on top of each file to say so.
+    # Grep'ing the whole file is not good either: AIX grep has a line
+    # limit of 2048, but all sed's we know have understand at least 4000.
+    if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then
+      dirpart=`$as_dirname -- "$mf" ||
+$as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$mf" : 'X\(//\)[^/]' \| \
+	 X"$mf" : 'X\(//\)$' \| \
+	 X"$mf" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$mf" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+    else
+      continue
+    fi
+    # Extract the definition of DEPDIR, am__include, and am__quote
+    # from the Makefile without running `make'.
+    DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
+    test -z "$DEPDIR" && continue
+    am__include=`sed -n 's/^am__include = //p' < "$mf"`
+    test -z "am__include" && continue
+    am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
+    # When using ansi2knr, U may be empty or an underscore; expand it
+    U=`sed -n 's/^U = //p' < "$mf"`
+    # Find all dependency output files, they are included files with
+    # $(DEPDIR) in their names.  We invoke sed twice because it is the
+    # simplest approach to changing $(DEPDIR) to its actual value in the
+    # expansion.
+    for file in `sed -n "
+      s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
+	 sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
+      # Make sure the directory exists.
+      test -f "$dirpart/$file" && continue
+      fdir=`$as_dirname -- "$file" ||
+$as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$file" : 'X\(//\)[^/]' \| \
+	 X"$file" : 'X\(//\)$' \| \
+	 X"$file" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$file" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+      as_dir=$dirpart/$fdir; as_fn_mkdir_p
+      # echo "creating $dirpart/$file"
+      echo '# dummy' > "$dirpart/$file"
+    done
+  done
 }
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_link") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest$ac_exeext && {
-	 test "$cross_compiling" = yes ||
-	 $as_test_x conftest$ac_exeext
-       }; then
-  ac_cv_func_OSAtomicAdd32Barrier=yes
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
+ ;;
+    "libtool":C)
 
-	ac_cv_func_OSAtomicAdd32Barrier=no
-fi
+    # See if we are running on zsh, and set the options which allow our
+    # commands through without removal of \ escapes.
+    if test -n "${ZSH_VERSION+set}" ; then
+      setopt NO_GLOB_SUBST
+    fi
 
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-      conftest$ac_exeext conftest.$ac_ext
-fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_func_OSAtomicAdd32Barrier" >&5
-$as_echo "$ac_cv_func_OSAtomicAdd32Barrier" >&6; }
-if test "x$ac_cv_func_OSAtomicAdd32Barrier" = x""yes; then
-  MAC_OS_X_VERSION=1040
-fi
+    cfgfile="${ofile}T"
+    trap "$RM \"$cfgfile\"; exit 1" 1 2 15
+    $RM "$cfgfile"
 
-        { $as_echo "$as_me:$LINENO: checking for OSAtomicAnd32OrigBarrier" >&5
-$as_echo_n "checking for OSAtomicAnd32OrigBarrier... " >&6; }
-if test "${ac_cv_func_OSAtomicAnd32OrigBarrier+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-/* Define OSAtomicAnd32OrigBarrier to an innocuous variant, in case <limits.h> declares OSAtomicAnd32OrigBarrier.
-   For example, HP-UX 11i <limits.h> declares gettimeofday.  */
-#define OSAtomicAnd32OrigBarrier innocuous_OSAtomicAnd32OrigBarrier
+    cat <<_LT_EOF >> "$cfgfile"
+#! $SHELL
 
-/* System header to define __stub macros and hopefully few prototypes,
-    which can conflict with char OSAtomicAnd32OrigBarrier (); below.
-    Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-    <limits.h> exists even on freestanding compilers.  */
+# `$ECHO "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services.
+# Generated automatically by $as_me ($PACKAGE$TIMESTAMP) $VERSION
+# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
+# NOTE: Changes made to this file will be lost: look at ltmain.sh.
+#
+#   Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,
+#                 2006, 2007, 2008 Free Software Foundation, Inc.
+#   Written by Gordon Matzigkeit, 1996
+#
+#   This file is part of GNU Libtool.
+#
+# GNU Libtool is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# As a special exception to the GNU General Public License,
+# if you distribute this file as part of a program or library that
+# is built using GNU Libtool, you may include this file under the
+# same distribution terms that you use for the rest of that program.
+#
+# GNU Libtool is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING.  If not, a copy
+# can be downloaded from http://www.gnu.org/licenses/gpl.html, or
+# obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
 
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
 
-#undef OSAtomicAnd32OrigBarrier
+# The names of the tagged configurations supported by this script.
+available_tags="CXX "
 
-/* Override any GCC internal prototype to avoid an error.
-   Use char because int might match the return type of a GCC
-   builtin and then its argument prototype would still apply.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-char OSAtomicAnd32OrigBarrier ();
-/* The GNU C library defines this for functions which it implements
-    to always fail with ENOSYS.  Some functions are actually named
-    something starting with __ and the normal name is an alias.  */
-#if defined __stub_OSAtomicAnd32OrigBarrier || defined __stub___OSAtomicAnd32OrigBarrier
-choke me
-#endif
+# ### BEGIN LIBTOOL CONFIG
 
-int
-main ()
-{
-return OSAtomicAnd32OrigBarrier ();
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_link") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest$ac_exeext && {
-	 test "$cross_compiling" = yes ||
-	 $as_test_x conftest$ac_exeext
-       }; then
-  ac_cv_func_OSAtomicAnd32OrigBarrier=yes
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
+# Whether or not to build shared libraries.
+build_libtool_libs=$enable_shared
 
-	ac_cv_func_OSAtomicAnd32OrigBarrier=no
-fi
+# Assembler program.
+AS=$AS
 
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-      conftest$ac_exeext conftest.$ac_ext
-fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_func_OSAtomicAnd32OrigBarrier" >&5
-$as_echo "$ac_cv_func_OSAtomicAnd32OrigBarrier" >&6; }
-if test "x$ac_cv_func_OSAtomicAnd32OrigBarrier" = x""yes; then
-  MAC_OS_X_VERSION=1050
-fi
+# DLL creation program.
+DLLTOOL=$DLLTOOL
 
+# Object dumper program.
+OBJDUMP=$OBJDUMP
 
-cat >>confdefs.h <<_ACEOF
-#define MAC_OS_X_VERSION $MAC_OS_X_VERSION
-_ACEOF
+# Which release of libtool.m4 was used?
+macro_version=$macro_version
+macro_revision=$macro_revision
 
-    fi
+# Whether or not to build static libraries.
+build_old_libs=$enable_static
 
-    if test $targetos = _OU_TARGET_OS_SUNOS
-    then
-        { $as_echo "$as_me:$LINENO: checking for atomic_inc_32_nv" >&5
-$as_echo_n "checking for atomic_inc_32_nv... " >&6; }
-if test "${ac_cv_func_atomic_inc_32_nv+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-/* Define atomic_inc_32_nv to an innocuous variant, in case <limits.h> declares atomic_inc_32_nv.
-   For example, HP-UX 11i <limits.h> declares gettimeofday.  */
-#define atomic_inc_32_nv innocuous_atomic_inc_32_nv
+# What type of objects to build.
+pic_mode=$pic_mode
+
+# Whether or not to optimize for fast installation.
+fast_install=$enable_fast_install
+
+# The host system.
+host_alias=$host_alias
+host=$host
+host_os=$host_os
+
+# The build system.
+build_alias=$build_alias
+build=$build
+build_os=$build_os
 
-/* System header to define __stub macros and hopefully few prototypes,
-    which can conflict with char atomic_inc_32_nv (); below.
-    Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-    <limits.h> exists even on freestanding compilers.  */
+# A sed program that does not truncate output.
+SED=$lt_SED
 
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
+# Sed that helps us avoid accidentally triggering echo(1) options like -n.
+Xsed="\$SED -e 1s/^X//"
 
-#undef atomic_inc_32_nv
+# A grep program that handles long lines.
+GREP=$lt_GREP
 
-/* Override any GCC internal prototype to avoid an error.
-   Use char because int might match the return type of a GCC
-   builtin and then its argument prototype would still apply.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-char atomic_inc_32_nv ();
-/* The GNU C library defines this for functions which it implements
-    to always fail with ENOSYS.  Some functions are actually named
-    something starting with __ and the normal name is an alias.  */
-#if defined __stub_atomic_inc_32_nv || defined __stub___atomic_inc_32_nv
-choke me
-#endif
+# An ERE matcher.
+EGREP=$lt_EGREP
 
-int
-main ()
-{
-return atomic_inc_32_nv ();
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_link") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest$ac_exeext && {
-	 test "$cross_compiling" = yes ||
-	 $as_test_x conftest$ac_exeext
-       }; then
-  ac_cv_func_atomic_inc_32_nv=yes
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
+# A literal string matcher.
+FGREP=$lt_FGREP
 
-	ac_cv_func_atomic_inc_32_nv=no
-fi
+# A BSD- or MS-compatible name lister.
+NM=$lt_NM
 
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-      conftest$ac_exeext conftest.$ac_ext
-fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_func_atomic_inc_32_nv" >&5
-$as_echo "$ac_cv_func_atomic_inc_32_nv" >&6; }
-if test "x$ac_cv_func_atomic_inc_32_nv" = x""yes; then
-  :
-else
-  targetos=_OU_TARGET_OS_GENUNIX
-fi
+# Whether we need soft or hard links.
+LN_S=$lt_LN_S
 
-    fi
+# What is the maximum length of a command?
+max_cmd_len=$max_cmd_len
 
+# Object file suffix (normally "o").
+objext=$ac_objext
 
-cat >>confdefs.h <<_ACEOF
-#define _OU_TARGET_OS $targetos
-_ACEOF
+# Executable file suffix (normally "").
+exeext=$exeext
 
-fi
+# whether the shell understands "unset".
+lt_unset=$lt_unset
 
+# turn spaces into newlines.
+SP2NL=$lt_lt_SP2NL
 
-subdirs="$subdirs ou"
+# turn newlines into spaces.
+NL2SP=$lt_lt_NL2SP
 
- if test x$use_ou = xyes; then
-  ENABLE_OU_TRUE=
-  ENABLE_OU_FALSE='#'
-else
-  ENABLE_OU_TRUE='#'
-  ENABLE_OU_FALSE=
-fi
+# How to create reloadable object files.
+reload_flag=$lt_reload_flag
+reload_cmds=$lt_reload_cmds
 
+# Method to check whether dependent libraries are shared objects.
+deplibs_check_method=$lt_deplibs_check_method
 
+# Command to use when deplibs_check_method == "file_magic".
+file_magic_cmd=$lt_file_magic_cmd
 
-# Check whether --enable-asserts was given.
-if test "${enable_asserts+set}" = set; then
-  enableval=$enable_asserts; asserts=$enableval
-else
-  asserts=yes
-fi
+# The archiver.
+AR=$lt_AR
+AR_FLAGS=$lt_AR_FLAGS
 
-if test x$asserts = xno
-then
-    CPPFLAGS="$CPPFLAGS -DdNODEBUG"
-    if test x$use_ou = xyes
-    then
-        CPPFLAGS="$CPPFLAGS -DNDEBUG"
-    fi
-fi
+# A symbol stripping program.
+STRIP=$lt_STRIP
 
+# Commands used to install an old-style archive.
+RANLIB=$lt_RANLIB
+old_postinstall_cmds=$lt_old_postinstall_cmds
+old_postuninstall_cmds=$lt_old_postuninstall_cmds
 
+# A C compiler.
+LTCC=$lt_CC
 
+# LTCC compiler flags.
+LTCFLAGS=$lt_CFLAGS
 
+# Take the output of nm and produce a listing of raw symbols and C names.
+global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe
 
+# Transform the output of nm in a proper C declaration.
+global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl
 
+# Transform the output of nm in a C name address pair.
+global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
 
-ac_config_files="$ac_config_files Makefile include/Makefile include/ode/Makefile include/drawstuff/Makefile ode/Makefile ode/src/Makefile ode/src/joints/Makefile drawstuff/Makefile drawstuff/src/Makefile drawstuff/dstest/Makefile ode/demo/Makefile OPCODE/Makefile OPCODE/Ice/Makefile GIMPACT/Makefile GIMPACT/include/Makefile GIMPACT/include/GIMPACT/Makefile GIMPACT/src/Makefile tests/Makefile tests/UnitTest++/Makefile tests/UnitTest++/src/Makefile tests/UnitTest++/src/Posix/Makefile tests/UnitTest++/src/Win32/Makefile ode-config ode.pc"
+# Transform the output of nm in a C name address pair when lib prefix is needed.
+global_symbol_to_c_name_address_lib_prefix=$lt_lt_cv_sys_global_symbol_to_c_name_address_lib_prefix
 
-cat >confcache <<\_ACEOF
-# This file is a shell script that caches the results of configure
-# tests run on this system so they can be shared between configure
-# scripts and configure runs, see configure's option --config-cache.
-# It is not useful on other systems.  If it contains results you don't
-# want to keep, you may remove or edit it.
-#
-# config.status only pays attention to the cache file if you give it
-# the --recheck option to rerun configure.
-#
-# `ac_cv_env_foo' variables (set or unset) will be overridden when
-# loading this file, other *unset* `ac_cv_foo' will be assigned the
-# following values.
+# The name of the directory that contains temporary libtool files.
+objdir=$objdir
 
-_ACEOF
+# Shell to use when invoking shell scripts.
+SHELL=$lt_SHELL
 
-# The following way of writing the cache mishandles newlines in values,
-# but we know of no workaround that is simple, portable, and efficient.
-# So, we kill variables containing newlines.
-# Ultrix sh set writes to stderr and can't be redirected directly,
-# and sets the high bit in the cache file unless we assign to the vars.
-(
-  for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do
-    eval ac_val=\$$ac_var
-    case $ac_val in #(
-    *${as_nl}*)
-      case $ac_var in #(
-      *_cv_*) { $as_echo "$as_me:$LINENO: WARNING: cache variable $ac_var contains a newline" >&5
-$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
-      esac
-      case $ac_var in #(
-      _ | IFS | as_nl) ;; #(
-      BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(
-      *) $as_unset $ac_var ;;
-      esac ;;
-    esac
-  done
+# An echo program that does not interpret backslashes.
+ECHO=$lt_ECHO
 
-  (set) 2>&1 |
-    case $as_nl`(ac_space=' '; set) 2>&1` in #(
-    *${as_nl}ac_space=\ *)
-      # `set' does not quote correctly, so add quotes (double-quote
-      # substitution turns \\\\ into \\, and sed turns \\ into \).
-      sed -n \
-	"s/'/'\\\\''/g;
-	  s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p"
-      ;; #(
-    *)
-      # `set' quotes correctly as required by POSIX, so do not add quotes.
-      sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
-      ;;
-    esac |
-    sort
-) |
-  sed '
-     /^ac_cv_env_/b end
-     t clear
-     :clear
-     s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/
-     t end
-     s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/
-     :end' >>confcache
-if diff "$cache_file" confcache >/dev/null 2>&1; then :; else
-  if test -w "$cache_file"; then
-    test "x$cache_file" != "x/dev/null" &&
-      { $as_echo "$as_me:$LINENO: updating cache $cache_file" >&5
-$as_echo "$as_me: updating cache $cache_file" >&6;}
-    cat confcache >$cache_file
-  else
-    { $as_echo "$as_me:$LINENO: not updating unwritable cache $cache_file" >&5
-$as_echo "$as_me: not updating unwritable cache $cache_file" >&6;}
-  fi
-fi
-rm -f confcache
+# Used to examine libraries when file_magic_cmd begins with "file".
+MAGIC_CMD=$MAGIC_CMD
 
-test "x$prefix" = xNONE && prefix=$ac_default_prefix
-# Let make expand exec_prefix.
-test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
+# Must we lock files when doing compilation?
+need_locks=$lt_need_locks
 
-DEFS=-DHAVE_CONFIG_H
+# Tool to manipulate archived DWARF debug symbol files on Mac OS X.
+DSYMUTIL=$lt_DSYMUTIL
 
-ac_libobjs=
-ac_ltlibobjs=
-for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue
-  # 1. Remove the extension, and $U if already installed.
-  ac_script='s/\$U\././;s/\.o$//;s/\.obj$//'
-  ac_i=`$as_echo "$ac_i" | sed "$ac_script"`
-  # 2. Prepend LIBOBJDIR.  When used with automake>=1.10 LIBOBJDIR
-  #    will be set to the directory where LIBOBJS objects are built.
-  ac_libobjs="$ac_libobjs \${LIBOBJDIR}$ac_i\$U.$ac_objext"
-  ac_ltlibobjs="$ac_ltlibobjs \${LIBOBJDIR}$ac_i"'$U.lo'
-done
-LIBOBJS=$ac_libobjs
+# Tool to change global to local symbols on Mac OS X.
+NMEDIT=$lt_NMEDIT
 
-LTLIBOBJS=$ac_ltlibobjs
+# Tool to manipulate fat objects and archives on Mac OS X.
+LIPO=$lt_LIPO
 
+# ldd/readelf like tool for Mach-O binaries on Mac OS X.
+OTOOL=$lt_OTOOL
 
-if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then
-  { { $as_echo "$as_me:$LINENO: error: conditional \"AMDEP\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-$as_echo "$as_me: error: conditional \"AMDEP\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
-   { (exit 1); exit 1; }; }
-fi
-if test -z "${am__fastdepCXX_TRUE}" && test -z "${am__fastdepCXX_FALSE}"; then
-  { { $as_echo "$as_me:$LINENO: error: conditional \"am__fastdepCXX\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-$as_echo "$as_me: error: conditional \"am__fastdepCXX\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
-   { (exit 1); exit 1; }; }
-fi
-if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then
-  { { $as_echo "$as_me:$LINENO: error: conditional \"am__fastdepCC\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-$as_echo "$as_me: error: conditional \"am__fastdepCC\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
-   { (exit 1); exit 1; }; }
-fi
+# ldd/readelf like tool for 64 bit Mach-O binaries on Mac OS X 10.4.
+OTOOL64=$lt_OTOOL64
 
-if test -z "${X86_64_SYSTEM_TRUE}" && test -z "${X86_64_SYSTEM_FALSE}"; then
-  { { $as_echo "$as_me:$LINENO: error: conditional \"X86_64_SYSTEM\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-$as_echo "$as_me: error: conditional \"X86_64_SYSTEM\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
-   { (exit 1); exit 1; }; }
-fi
-if test -z "${OPCODE_TRUE}" && test -z "${OPCODE_FALSE}"; then
-  { { $as_echo "$as_me:$LINENO: error: conditional \"OPCODE\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-$as_echo "$as_me: error: conditional \"OPCODE\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
-   { (exit 1); exit 1; }; }
-fi
-if test -z "${GIMPACT_TRUE}" && test -z "${GIMPACT_FALSE}"; then
-  { { $as_echo "$as_me:$LINENO: error: conditional \"GIMPACT\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-$as_echo "$as_me: error: conditional \"GIMPACT\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
-   { (exit 1); exit 1; }; }
-fi
-if test -z "${TRIMESH_TRUE}" && test -z "${TRIMESH_FALSE}"; then
-  { { $as_echo "$as_me:$LINENO: error: conditional \"TRIMESH\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-$as_echo "$as_me: error: conditional \"TRIMESH\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
-   { (exit 1); exit 1; }; }
-fi
-if test -z "${ENABLE_DRAWSTUFF_TRUE}" && test -z "${ENABLE_DRAWSTUFF_FALSE}"; then
-  { { $as_echo "$as_me:$LINENO: error: conditional \"ENABLE_DRAWSTUFF\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-$as_echo "$as_me: error: conditional \"ENABLE_DRAWSTUFF\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
-   { (exit 1); exit 1; }; }
-fi
-if test -z "${WIN32_TRUE}" && test -z "${WIN32_FALSE}"; then
-  { { $as_echo "$as_me:$LINENO: error: conditional \"WIN32\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-$as_echo "$as_me: error: conditional \"WIN32\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
-   { (exit 1); exit 1; }; }
-fi
-if test -z "${X11_TRUE}" && test -z "${X11_FALSE}"; then
-  { { $as_echo "$as_me:$LINENO: error: conditional \"X11\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-$as_echo "$as_me: error: conditional \"X11\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
-   { (exit 1); exit 1; }; }
-fi
-if test -z "${OSX_TRUE}" && test -z "${OSX_FALSE}"; then
-  { { $as_echo "$as_me:$LINENO: error: conditional \"OSX\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-$as_echo "$as_me: error: conditional \"OSX\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
-   { (exit 1); exit 1; }; }
-fi
-if test -z "${ENABLE_DEMOS_TRUE}" && test -z "${ENABLE_DEMOS_FALSE}"; then
-  { { $as_echo "$as_me:$LINENO: error: conditional \"ENABLE_DEMOS\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-$as_echo "$as_me: error: conditional \"ENABLE_DEMOS\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
-   { (exit 1); exit 1; }; }
-fi
-if test -z "${ENABLE_OU_TRUE}" && test -z "${ENABLE_OU_FALSE}"; then
-  { { $as_echo "$as_me:$LINENO: error: conditional \"ENABLE_OU\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-$as_echo "$as_me: error: conditional \"ENABLE_OU\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
-   { (exit 1); exit 1; }; }
-fi
+# Old archive suffix (normally "a").
+libext=$libext
 
-: ${CONFIG_STATUS=./config.status}
-ac_write_fail=0
-ac_clean_files_save=$ac_clean_files
-ac_clean_files="$ac_clean_files $CONFIG_STATUS"
-{ $as_echo "$as_me:$LINENO: creating $CONFIG_STATUS" >&5
-$as_echo "$as_me: creating $CONFIG_STATUS" >&6;}
-cat >$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
-#! $SHELL
-# Generated by $as_me.
-# Run this file to recreate the current configuration.
-# Compiler output produced by configure, useful for debugging
-# configure, is in config.log if it exists.
+# Shared library suffix (normally ".so").
+shrext_cmds=$lt_shrext_cmds
 
-debug=false
-ac_cs_recheck=false
-ac_cs_silent=false
-SHELL=\${CONFIG_SHELL-$SHELL}
-_ACEOF
+# The commands to extract the exported symbol list from a shared archive.
+extract_expsyms_cmds=$lt_extract_expsyms_cmds
 
-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-## --------------------- ##
-## M4sh Initialization.  ##
-## --------------------- ##
+# Variables whose values should be saved in libtool wrapper scripts and
+# restored at link time.
+variables_saved_for_relink=$lt_variables_saved_for_relink
 
-# Be more Bourne compatible
-DUALCASE=1; export DUALCASE # for MKS sh
-if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
-  emulate sh
-  NULLCMD=:
-  # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
-  # is contrary to our usage.  Disable this feature.
-  alias -g '${1+"$@"}'='"$@"'
-  setopt NO_GLOB_SUBST
-else
-  case `(set -o) 2>/dev/null` in
-  *posix*) set -o posix ;;
-esac
+# Do we need the "lib" prefix for modules?
+need_lib_prefix=$need_lib_prefix
+
+# Do we need a version for libraries?
+need_version=$need_version
 
-fi
+# Library versioning type.
+version_type=$version_type
 
+# Shared library runtime path variable.
+runpath_var=$runpath_var
 
+# Shared library path variable.
+shlibpath_var=$shlibpath_var
 
+# Is shlibpath searched before the hard-coded library search path?
+shlibpath_overrides_runpath=$shlibpath_overrides_runpath
 
-# PATH needs CR
-# Avoid depending upon Character Ranges.
-as_cr_letters='abcdefghijklmnopqrstuvwxyz'
-as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
-as_cr_Letters=$as_cr_letters$as_cr_LETTERS
-as_cr_digits='0123456789'
-as_cr_alnum=$as_cr_Letters$as_cr_digits
+# Format of library name prefix.
+libname_spec=$lt_libname_spec
 
-as_nl='
-'
-export as_nl
-# Printing a long string crashes Solaris 7 /usr/bin/printf.
-as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
-as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
-as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
-if (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
-  as_echo='printf %s\n'
-  as_echo_n='printf %s'
-else
-  if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
-    as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
-    as_echo_n='/usr/ucb/echo -n'
-  else
-    as_echo_body='eval expr "X$1" : "X\\(.*\\)"'
-    as_echo_n_body='eval
-      arg=$1;
-      case $arg in
-      *"$as_nl"*)
-	expr "X$arg" : "X\\(.*\\)$as_nl";
-	arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
-      esac;
-      expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl"
-    '
-    export as_echo_n_body
-    as_echo_n='sh -c $as_echo_n_body as_echo'
-  fi
-  export as_echo_body
-  as_echo='sh -c $as_echo_body as_echo'
-fi
+# List of archive names.  First name is the real one, the rest are links.
+# The last name is the one that the linker finds with -lNAME
+library_names_spec=$lt_library_names_spec
 
-# The user is always right.
-if test "${PATH_SEPARATOR+set}" != set; then
-  PATH_SEPARATOR=:
-  (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
-    (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
-      PATH_SEPARATOR=';'
-  }
-fi
+# The coded name of the library, if different from the real name.
+soname_spec=$lt_soname_spec
 
-# Support unset when possible.
-if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
-  as_unset=unset
-else
-  as_unset=false
-fi
+# Command to use after installation of a shared archive.
+postinstall_cmds=$lt_postinstall_cmds
 
+# Command to use after uninstallation of a shared archive.
+postuninstall_cmds=$lt_postuninstall_cmds
 
-# IFS
-# We need space, tab and new line, in precisely that order.  Quoting is
-# there to prevent editors from complaining about space-tab.
-# (If _AS_PATH_WALK were called with IFS unset, it would disable word
-# splitting by setting IFS to empty value.)
-IFS=" ""	$as_nl"
+# Commands used to finish a libtool library installation in a directory.
+finish_cmds=$lt_finish_cmds
 
-# Find who we are.  Look in the path if we contain no directory separator.
-case $0 in
-  *[\\/]* ) as_myself=$0 ;;
-  *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
-done
-IFS=$as_save_IFS
+# As "finish_cmds", except a single script fragment to be evaled but
+# not shown.
+finish_eval=$lt_finish_eval
 
-     ;;
-esac
-# We did not find ourselves, most probably we were run as `sh COMMAND'
-# in which case we are not to be found in the path.
-if test "x$as_myself" = x; then
-  as_myself=$0
-fi
-if test ! -f "$as_myself"; then
-  $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
-  { (exit 1); exit 1; }
-fi
+# Whether we should hardcode library paths into libraries.
+hardcode_into_libs=$hardcode_into_libs
 
-# Work around bugs in pre-3.0 UWIN ksh.
-for as_var in ENV MAIL MAILPATH
-do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
-done
-PS1='$ '
-PS2='> '
-PS4='+ '
+# Compile-time system search path for libraries.
+sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
 
-# NLS nuisances.
-LC_ALL=C
-export LC_ALL
-LANGUAGE=C
-export LANGUAGE
+# Run-time system search path for libraries.
+sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
 
-# Required to use basename.
-if expr a : '\(a\)' >/dev/null 2>&1 &&
-   test "X`expr 00001 : '.*\(...\)'`" = X001; then
-  as_expr=expr
-else
-  as_expr=false
-fi
+# Whether dlopen is supported.
+dlopen_support=$enable_dlopen
 
-if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
-  as_basename=basename
-else
-  as_basename=false
-fi
+# Whether dlopen of programs is supported.
+dlopen_self=$enable_dlopen_self
 
+# Whether dlopen of statically linked programs is supported.
+dlopen_self_static=$enable_dlopen_self_static
 
-# Name of the executable.
-as_me=`$as_basename -- "$0" ||
-$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
-	 X"$0" : 'X\(//\)$' \| \
-	 X"$0" : 'X\(/\)' \| . 2>/dev/null ||
-$as_echo X/"$0" |
-    sed '/^.*\/\([^/][^/]*\)\/*$/{
-	    s//\1/
-	    q
-	  }
-	  /^X\/\(\/\/\)$/{
-	    s//\1/
-	    q
-	  }
-	  /^X\/\(\/\).*/{
-	    s//\1/
-	    q
-	  }
-	  s/.*/./; q'`
+# Commands to strip libraries.
+old_striplib=$lt_old_striplib
+striplib=$lt_striplib
 
-# CDPATH.
-$as_unset CDPATH
 
+# The linker used to build libraries.
+LD=$lt_LD
 
+# Commands used to build an old-style archive.
+old_archive_cmds=$lt_old_archive_cmds
 
-  as_lineno_1=$LINENO
-  as_lineno_2=$LINENO
-  test "x$as_lineno_1" != "x$as_lineno_2" &&
-  test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || {
-
-  # Create $as_me.lineno as a copy of $as_myself, but with $LINENO
-  # uniformly replaced by the line number.  The first 'sed' inserts a
-  # line-number line after each line using $LINENO; the second 'sed'
-  # does the real work.  The second script uses 'N' to pair each
-  # line-number line with the line containing $LINENO, and appends
-  # trailing '-' during substitution so that $LINENO is not a special
-  # case at line end.
-  # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
-  # scripts with optimization help from Paolo Bonzini.  Blame Lee
-  # E. McMahon (1931-1989) for sed's syntax.  :-)
-  sed -n '
-    p
-    /[$]LINENO/=
-  ' <$as_myself |
-    sed '
-      s/[$]LINENO.*/&-/
-      t lineno
-      b
-      :lineno
-      N
-      :loop
-      s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/
-      t loop
-      s/-\n.*//
-    ' >$as_me.lineno &&
-  chmod +x "$as_me.lineno" ||
-    { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2
-   { (exit 1); exit 1; }; }
+# A language specific compiler.
+CC=$lt_compiler
 
-  # Don't try to exec as it changes $[0], causing all sort of problems
-  # (the dirname of $[0] is not the place where we might find the
-  # original and so on.  Autoconf is especially sensitive to this).
-  . "./$as_me.lineno"
-  # Exit status is that of the last command.
-  exit
-}
+# Is the compiler the GNU compiler?
+with_gcc=$GCC
 
+# Compiler flag to turn off builtin functions.
+no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag
 
-if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
-  as_dirname=dirname
-else
-  as_dirname=false
-fi
+# How to pass a linker flag through the compiler.
+wl=$lt_lt_prog_compiler_wl
 
-ECHO_C= ECHO_N= ECHO_T=
-case `echo -n x` in
--n*)
-  case `echo 'x\c'` in
-  *c*) ECHO_T='	';;	# ECHO_T is single tab character.
-  *)   ECHO_C='\c';;
-  esac;;
-*)
-  ECHO_N='-n';;
-esac
-if expr a : '\(a\)' >/dev/null 2>&1 &&
-   test "X`expr 00001 : '.*\(...\)'`" = X001; then
-  as_expr=expr
-else
-  as_expr=false
-fi
+# Additional compiler flags for building library objects.
+pic_flag=$lt_lt_prog_compiler_pic
 
-rm -f conf$$ conf$$.exe conf$$.file
-if test -d conf$$.dir; then
-  rm -f conf$$.dir/conf$$.file
-else
-  rm -f conf$$.dir
-  mkdir conf$$.dir 2>/dev/null
-fi
-if (echo >conf$$.file) 2>/dev/null; then
-  if ln -s conf$$.file conf$$ 2>/dev/null; then
-    as_ln_s='ln -s'
-    # ... but there are two gotchas:
-    # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
-    # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
-    # In both cases, we have to default to `cp -p'.
-    ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
-      as_ln_s='cp -p'
-  elif ln conf$$.file conf$$ 2>/dev/null; then
-    as_ln_s=ln
-  else
-    as_ln_s='cp -p'
-  fi
-else
-  as_ln_s='cp -p'
-fi
-rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
-rmdir conf$$.dir 2>/dev/null
+# Compiler flag to prevent dynamic linking.
+link_static_flag=$lt_lt_prog_compiler_static
 
-if mkdir -p . 2>/dev/null; then
-  as_mkdir_p=:
-else
-  test -d ./-p && rmdir ./-p
-  as_mkdir_p=false
-fi
+# Does compiler simultaneously support -c and -o options?
+compiler_c_o=$lt_lt_cv_prog_compiler_c_o
 
-if test -x / >/dev/null 2>&1; then
-  as_test_x='test -x'
-else
-  if ls -dL / >/dev/null 2>&1; then
-    as_ls_L_option=L
-  else
-    as_ls_L_option=
-  fi
-  as_test_x='
-    eval sh -c '\''
-      if test -d "$1"; then
-	test -d "$1/.";
-      else
-	case $1 in
-	-*)set "./$1";;
-	esac;
-	case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in
-	???[sx]*):;;*)false;;esac;fi
-    '\'' sh
-  '
-fi
-as_executable_p=$as_test_x
+# Whether or not to add -lc for building shared libraries.
+build_libtool_need_lc=$archive_cmds_need_lc
+
+# Whether or not to disallow shared libs when runtime libs are static.
+allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes
+
+# Compiler flag to allow reflexive dlopens.
+export_dynamic_flag_spec=$lt_export_dynamic_flag_spec
 
-# Sed expression to map a string onto a valid CPP name.
-as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
+# Compiler flag to generate shared objects directly from archives.
+whole_archive_flag_spec=$lt_whole_archive_flag_spec
 
-# Sed expression to map a string onto a valid variable name.
-as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
+# Whether the compiler copes with passing no objects directly.
+compiler_needs_object=$lt_compiler_needs_object
 
+# Create an old-style archive from a shared archive.
+old_archive_from_new_cmds=$lt_old_archive_from_new_cmds
 
-exec 6>&1
+# Create a temporary old-style archive to link instead of a shared archive.
+old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds
 
-# Save the log message, to keep $[0] and so on meaningful, and to
-# report actual input values of CONFIG_FILES etc. instead of their
-# values after options handling.
-ac_log="
-This file was extended by ODE $as_me 0.11, which was
-generated by GNU Autoconf 2.63.  Invocation command line was
+# Commands used to build a shared archive.
+archive_cmds=$lt_archive_cmds
+archive_expsym_cmds=$lt_archive_expsym_cmds
 
-  CONFIG_FILES    = $CONFIG_FILES
-  CONFIG_HEADERS  = $CONFIG_HEADERS
-  CONFIG_LINKS    = $CONFIG_LINKS
-  CONFIG_COMMANDS = $CONFIG_COMMANDS
-  $ $0 $@
+# Commands used to build a loadable module if different from building
+# a shared archive.
+module_cmds=$lt_module_cmds
+module_expsym_cmds=$lt_module_expsym_cmds
 
-on `(hostname || uname -n) 2>/dev/null | sed 1q`
-"
+# Whether we are building with GNU ld or not.
+with_gnu_ld=$lt_with_gnu_ld
 
-_ACEOF
+# Flag that allows shared libraries with undefined symbols to be built.
+allow_undefined_flag=$lt_allow_undefined_flag
 
-case $ac_config_files in *"
-"*) set x $ac_config_files; shift; ac_config_files=$*;;
-esac
+# Flag that enforces no undefined symbols.
+no_undefined_flag=$lt_no_undefined_flag
 
-case $ac_config_headers in *"
-"*) set x $ac_config_headers; shift; ac_config_headers=$*;;
-esac
+# Flag to hardcode \$libdir into a binary during linking.
+# This must work even if \$libdir does not exist
+hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec
 
+# If ld is used when linking, flag to hardcode \$libdir into a binary
+# during linking.  This must work even if \$libdir does not exist.
+hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld
 
-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
-# Files that config.status was made for.
-config_files="`echo $ac_config_files`"
-config_headers="`echo $ac_config_headers`"
-config_commands="`echo $ac_config_commands`"
+# Whether we need a single "-rpath" flag with a separated argument.
+hardcode_libdir_separator=$lt_hardcode_libdir_separator
 
-_ACEOF
+# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes
+# DIR into the resulting binary.
+hardcode_direct=$hardcode_direct
 
-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-ac_cs_usage="\
-\`$as_me' instantiates files from templates according to the
-current configuration.
+# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes
+# DIR into the resulting binary and the resulting library dependency is
+# "absolute",i.e impossible to change by setting \${shlibpath_var} if the
+# library is relocated.
+hardcode_direct_absolute=$hardcode_direct_absolute
 
-Usage: $0 [OPTION]... [FILE]...
+# Set to "yes" if using the -LDIR flag during linking hardcodes DIR
+# into the resulting binary.
+hardcode_minus_L=$hardcode_minus_L
 
-  -h, --help       print this help, then exit
-  -V, --version    print version number and configuration settings, then exit
-  -q, --quiet, --silent
-                   do not print progress messages
-  -d, --debug      don't remove temporary files
-      --recheck    update $as_me by reconfiguring in the same conditions
-      --file=FILE[:TEMPLATE]
-                   instantiate the configuration file FILE
-      --header=FILE[:TEMPLATE]
-                   instantiate the configuration header FILE
+# Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR
+# into the resulting binary.
+hardcode_shlibpath_var=$hardcode_shlibpath_var
 
-Configuration files:
-$config_files
+# Set to "yes" if building a shared library automatically hardcodes DIR
+# into the library and all subsequent libraries and executables linked
+# against it.
+hardcode_automatic=$hardcode_automatic
 
-Configuration headers:
-$config_headers
+# Set to yes if linker adds runtime paths of dependent libraries
+# to runtime path list.
+inherit_rpath=$inherit_rpath
 
-Configuration commands:
-$config_commands
+# Whether libtool must link a program against all its dependency libraries.
+link_all_deplibs=$link_all_deplibs
 
-Report bugs to <bug-autoconf@gnu.org>."
+# Fix the shell variable \$srcfile for the compiler.
+fix_srcfile_path=$lt_fix_srcfile_path
 
-_ACEOF
-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
-ac_cs_version="\\
-ODE config.status 0.11
-configured by $0, generated by GNU Autoconf 2.63,
-  with options \\"`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`\\"
+# Set to "yes" if exported symbols are required.
+always_export_symbols=$always_export_symbols
 
-Copyright (C) 2008 Free Software Foundation, Inc.
-This config.status script is free software; the Free Software Foundation
-gives unlimited permission to copy, distribute and modify it."
+# The commands to list exported symbols.
+export_symbols_cmds=$lt_export_symbols_cmds
 
-ac_pwd='$ac_pwd'
-srcdir='$srcdir'
-INSTALL='$INSTALL'
-MKDIR_P='$MKDIR_P'
-AWK='$AWK'
-test -n "\$AWK" || AWK=awk
-_ACEOF
+# Symbols that should not be listed in the preloaded symbols.
+exclude_expsyms=$lt_exclude_expsyms
 
-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-# The default lists apply if the user does not specify any file.
-ac_need_defaults=:
-while test $# != 0
-do
-  case $1 in
-  --*=*)
-    ac_option=`expr "X$1" : 'X\([^=]*\)='`
-    ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'`
-    ac_shift=:
-    ;;
-  *)
-    ac_option=$1
-    ac_optarg=$2
-    ac_shift=shift
-    ;;
-  esac
+# Symbols that must always be exported.
+include_expsyms=$lt_include_expsyms
 
-  case $ac_option in
-  # Handling of the options.
-  -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
-    ac_cs_recheck=: ;;
-  --version | --versio | --versi | --vers | --ver | --ve | --v | -V )
-    $as_echo "$ac_cs_version"; exit ;;
-  --debug | --debu | --deb | --de | --d | -d )
-    debug=: ;;
-  --file | --fil | --fi | --f )
-    $ac_shift
-    case $ac_optarg in
-    *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;;
-    esac
-    CONFIG_FILES="$CONFIG_FILES '$ac_optarg'"
-    ac_need_defaults=false;;
-  --header | --heade | --head | --hea )
-    $ac_shift
-    case $ac_optarg in
-    *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;;
-    esac
-    CONFIG_HEADERS="$CONFIG_HEADERS '$ac_optarg'"
-    ac_need_defaults=false;;
-  --he | --h)
-    # Conflict between --help and --header
-    { $as_echo "$as_me: error: ambiguous option: $1
-Try \`$0 --help' for more information." >&2
-   { (exit 1); exit 1; }; };;
-  --help | --hel | -h )
-    $as_echo "$ac_cs_usage"; exit ;;
-  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
-  | -silent | --silent | --silen | --sile | --sil | --si | --s)
-    ac_cs_silent=: ;;
+# Commands necessary for linking programs (against libraries) with templates.
+prelink_cmds=$lt_prelink_cmds
 
-  # This is an error.
-  -*) { $as_echo "$as_me: error: unrecognized option: $1
-Try \`$0 --help' for more information." >&2
-   { (exit 1); exit 1; }; } ;;
+# Specify filename containing input files.
+file_list_spec=$lt_file_list_spec
 
-  *) ac_config_targets="$ac_config_targets $1"
-     ac_need_defaults=false ;;
+# How to hardcode a shared library path into an executable.
+hardcode_action=$hardcode_action
 
-  esac
-  shift
-done
+# The directories searched by this compiler when creating a shared library.
+compiler_lib_search_dirs=$lt_compiler_lib_search_dirs
 
-ac_configure_extra_args=
+# Dependencies to place before and after the objects being linked to
+# create a shared library.
+predep_objects=$lt_predep_objects
+postdep_objects=$lt_postdep_objects
+predeps=$lt_predeps
+postdeps=$lt_postdeps
 
-if $ac_cs_silent; then
-  exec 6>/dev/null
-  ac_configure_extra_args="$ac_configure_extra_args --silent"
-fi
+# The library search path used internally by the compiler when linking
+# a shared library.
+compiler_lib_search_path=$lt_compiler_lib_search_path
 
-_ACEOF
-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
-if \$ac_cs_recheck; then
-  set X '$SHELL' '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
-  shift
-  \$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6
-  CONFIG_SHELL='$SHELL'
-  export CONFIG_SHELL
-  exec "\$@"
+# ### END LIBTOOL CONFIG
+
+_LT_EOF
+
+  case $host_os in
+  aix3*)
+    cat <<\_LT_EOF >> "$cfgfile"
+# AIX sometimes has problems with the GCC collect2 program.  For some
+# reason, if we set the COLLECT_NAMES environment variable, the problems
+# vanish in a puff of smoke.
+if test "X${COLLECT_NAMES+set}" != Xset; then
+  COLLECT_NAMES=
+  export COLLECT_NAMES
 fi
+_LT_EOF
+    ;;
+  esac
 
-_ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-exec 5>>config.log
-{
-  echo
-  sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX
-## Running $as_me. ##
-_ASBOX
-  $as_echo "$ac_log"
-} >&5
 
-_ACEOF
-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
-#
-# INIT-COMMANDS
-#
-AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"
+ltmain="$ac_aux_dir/ltmain.sh"
 
-_ACEOF
 
-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+  # We use sed instead of cat because bash on DJGPP gets confused if
+  # if finds mixed CR/LF and LF-only lines.  Since sed operates in
+  # text mode, it properly converts lines to CR/LF.  This bash problem
+  # is reportedly fixed, but why not run on old versions too?
+  sed '/^# Generated shell functions inserted here/q' "$ltmain" >> "$cfgfile" \
+    || (rm -f "$cfgfile"; exit 1)
 
-# Handling of arguments.
-for ac_config_target in $ac_config_targets
-do
-  case $ac_config_target in
-    "ode/src/config.h") CONFIG_HEADERS="$CONFIG_HEADERS ode/src/config.h" ;;
-    "depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;;
-    "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;;
-    "include/Makefile") CONFIG_FILES="$CONFIG_FILES include/Makefile" ;;
-    "include/ode/Makefile") CONFIG_FILES="$CONFIG_FILES include/ode/Makefile" ;;
-    "include/drawstuff/Makefile") CONFIG_FILES="$CONFIG_FILES include/drawstuff/Makefile" ;;
-    "ode/Makefile") CONFIG_FILES="$CONFIG_FILES ode/Makefile" ;;
-    "ode/src/Makefile") CONFIG_FILES="$CONFIG_FILES ode/src/Makefile" ;;
-    "ode/src/joints/Makefile") CONFIG_FILES="$CONFIG_FILES ode/src/joints/Makefile" ;;
-    "drawstuff/Makefile") CONFIG_FILES="$CONFIG_FILES drawstuff/Makefile" ;;
-    "drawstuff/src/Makefile") CONFIG_FILES="$CONFIG_FILES drawstuff/src/Makefile" ;;
-    "drawstuff/dstest/Makefile") CONFIG_FILES="$CONFIG_FILES drawstuff/dstest/Makefile" ;;
-    "ode/demo/Makefile") CONFIG_FILES="$CONFIG_FILES ode/demo/Makefile" ;;
-    "OPCODE/Makefile") CONFIG_FILES="$CONFIG_FILES OPCODE/Makefile" ;;
-    "OPCODE/Ice/Makefile") CONFIG_FILES="$CONFIG_FILES OPCODE/Ice/Makefile" ;;
-    "GIMPACT/Makefile") CONFIG_FILES="$CONFIG_FILES GIMPACT/Makefile" ;;
-    "GIMPACT/include/Makefile") CONFIG_FILES="$CONFIG_FILES GIMPACT/include/Makefile" ;;
-    "GIMPACT/include/GIMPACT/Makefile") CONFIG_FILES="$CONFIG_FILES GIMPACT/include/GIMPACT/Makefile" ;;
-    "GIMPACT/src/Makefile") CONFIG_FILES="$CONFIG_FILES GIMPACT/src/Makefile" ;;
-    "tests/Makefile") CONFIG_FILES="$CONFIG_FILES tests/Makefile" ;;
-    "tests/UnitTest++/Makefile") CONFIG_FILES="$CONFIG_FILES tests/UnitTest++/Makefile" ;;
-    "tests/UnitTest++/src/Makefile") CONFIG_FILES="$CONFIG_FILES tests/UnitTest++/src/Makefile" ;;
-    "tests/UnitTest++/src/Posix/Makefile") CONFIG_FILES="$CONFIG_FILES tests/UnitTest++/src/Posix/Makefile" ;;
-    "tests/UnitTest++/src/Win32/Makefile") CONFIG_FILES="$CONFIG_FILES tests/UnitTest++/src/Win32/Makefile" ;;
-    "ode-config") CONFIG_FILES="$CONFIG_FILES ode-config" ;;
-    "ode.pc") CONFIG_FILES="$CONFIG_FILES ode.pc" ;;
+  case $xsi_shell in
+  yes)
+    cat << \_LT_EOF >> "$cfgfile"
 
-  *) { { $as_echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5
-$as_echo "$as_me: error: invalid argument: $ac_config_target" >&2;}
-   { (exit 1); exit 1; }; };;
+# func_dirname file append nondir_replacement
+# Compute the dirname of FILE.  If nonempty, add APPEND to the result,
+# otherwise set result to NONDIR_REPLACEMENT.
+func_dirname ()
+{
+  case ${1} in
+    */*) func_dirname_result="${1%/*}${2}" ;;
+    *  ) func_dirname_result="${3}" ;;
   esac
-done
+}
 
+# func_basename file
+func_basename ()
+{
+  func_basename_result="${1##*/}"
+}
 
-# If the user did not use the arguments to specify the items to instantiate,
-# then the envvar interface is used.  Set only those that are not.
-# We use the long form for the default assignment because of an extremely
-# bizarre bug on SunOS 4.1.3.
-if $ac_need_defaults; then
-  test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files
-  test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers
-  test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands
-fi
+# func_dirname_and_basename file append nondir_replacement
+# perform func_basename and func_dirname in a single function
+# call:
+#   dirname:  Compute the dirname of FILE.  If nonempty,
+#             add APPEND to the result, otherwise set result
+#             to NONDIR_REPLACEMENT.
+#             value returned in "$func_dirname_result"
+#   basename: Compute filename of FILE.
+#             value retuned in "$func_basename_result"
+# Implementation must be kept synchronized with func_dirname
+# and func_basename. For efficiency, we do not delegate to
+# those functions but instead duplicate the functionality here.
+func_dirname_and_basename ()
+{
+  case ${1} in
+    */*) func_dirname_result="${1%/*}${2}" ;;
+    *  ) func_dirname_result="${3}" ;;
+  esac
+  func_basename_result="${1##*/}"
+}
+
+# func_stripname prefix suffix name
+# strip PREFIX and SUFFIX off of NAME.
+# PREFIX and SUFFIX must not contain globbing or regex special
+# characters, hashes, percent signs, but SUFFIX may contain a leading
+# dot (in which case that matches only a dot).
+func_stripname ()
+{
+  # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are
+  # positional parameters, so assign one to ordinary parameter first.
+  func_stripname_result=${3}
+  func_stripname_result=${func_stripname_result#"${1}"}
+  func_stripname_result=${func_stripname_result%"${2}"}
+}
+
+# func_opt_split
+func_opt_split ()
+{
+  func_opt_split_opt=${1%%=*}
+  func_opt_split_arg=${1#*=}
+}
+
+# func_lo2o object
+func_lo2o ()
+{
+  case ${1} in
+    *.lo) func_lo2o_result=${1%.lo}.${objext} ;;
+    *)    func_lo2o_result=${1} ;;
+  esac
+}
 
-# Have a temporary directory for convenience.  Make it in the build tree
-# simply because there is no reason against having it here, and in addition,
-# creating and moving files from /tmp can sometimes cause problems.
-# Hook for its removal unless debugging.
-# Note that there is a small window in which the directory will not be cleaned:
-# after its creation but before its name has been assigned to `$tmp'.
-$debug ||
+# func_xform libobj-or-source
+func_xform ()
 {
-  tmp=
-  trap 'exit_status=$?
-  { test -z "$tmp" || test ! -d "$tmp" || rm -fr "$tmp"; } && exit $exit_status
-' 0
-  trap '{ (exit 1); exit 1; }' 1 2 13 15
+  func_xform_result=${1%.*}.lo
 }
-# Create a (secure) tmp directory for tmp files.
 
+# func_arith arithmetic-term...
+func_arith ()
 {
-  tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` &&
-  test -n "$tmp" && test -d "$tmp"
-}  ||
+  func_arith_result=$(( $* ))
+}
+
+# func_len string
+# STRING may not start with a hyphen.
+func_len ()
 {
-  tmp=./conf$$-$RANDOM
-  (umask 077 && mkdir "$tmp")
-} ||
+  func_len_result=${#1}
+}
+
+_LT_EOF
+    ;;
+  *) # Bourne compatible functions.
+    cat << \_LT_EOF >> "$cfgfile"
+
+# func_dirname file append nondir_replacement
+# Compute the dirname of FILE.  If nonempty, add APPEND to the result,
+# otherwise set result to NONDIR_REPLACEMENT.
+func_dirname ()
 {
-   $as_echo "$as_me: cannot create a temporary directory in ." >&2
-   { (exit 1); exit 1; }
+  # Extract subdirectory from the argument.
+  func_dirname_result=`$ECHO "X${1}" | $Xsed -e "$dirname"`
+  if test "X$func_dirname_result" = "X${1}"; then
+    func_dirname_result="${3}"
+  else
+    func_dirname_result="$func_dirname_result${2}"
+  fi
 }
 
-# Set up the scripts for CONFIG_FILES section.
-# No need to generate them if there are no CONFIG_FILES.
-# This happens for instance with `./config.status config.h'.
-if test -n "$CONFIG_FILES"; then
+# func_basename file
+func_basename ()
+{
+  func_basename_result=`$ECHO "X${1}" | $Xsed -e "$basename"`
+}
 
 
-ac_cr='
'
-ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' </dev/null 2>/dev/null`
-if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then
-  ac_cs_awk_cr='\\r'
-else
-  ac_cs_awk_cr=$ac_cr
-fi
+# func_stripname prefix suffix name
+# strip PREFIX and SUFFIX off of NAME.
+# PREFIX and SUFFIX must not contain globbing or regex special
+# characters, hashes, percent signs, but SUFFIX may contain a leading
+# dot (in which case that matches only a dot).
+# func_strip_suffix prefix name
+func_stripname ()
+{
+  case ${2} in
+    .*) func_stripname_result=`$ECHO "X${3}" \
+           | $Xsed -e "s%^${1}%%" -e "s%\\\\${2}\$%%"`;;
+    *)  func_stripname_result=`$ECHO "X${3}" \
+           | $Xsed -e "s%^${1}%%" -e "s%${2}\$%%"`;;
+  esac
+}
 
-echo 'BEGIN {' >"$tmp/subs1.awk" &&
-_ACEOF
+# sed scripts:
+my_sed_long_opt='1s/^\(-[^=]*\)=.*/\1/;q'
+my_sed_long_arg='1s/^-[^=]*=//'
 
+# func_opt_split
+func_opt_split ()
+{
+  func_opt_split_opt=`$ECHO "X${1}" | $Xsed -e "$my_sed_long_opt"`
+  func_opt_split_arg=`$ECHO "X${1}" | $Xsed -e "$my_sed_long_arg"`
+}
 
+# func_lo2o object
+func_lo2o ()
 {
-  echo "cat >conf$$subs.awk <<_ACEOF" &&
-  echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' &&
-  echo "_ACEOF"
-} >conf$$subs.sh ||
-  { { $as_echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5
-$as_echo "$as_me: error: could not make $CONFIG_STATUS" >&2;}
-   { (exit 1); exit 1; }; }
-ac_delim_num=`echo "$ac_subst_vars" | grep -c '$'`
-ac_delim='%!_!# '
-for ac_last_try in false false false false false :; do
-  . ./conf$$subs.sh ||
-    { { $as_echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5
-$as_echo "$as_me: error: could not make $CONFIG_STATUS" >&2;}
-   { (exit 1); exit 1; }; }
+  func_lo2o_result=`$ECHO "X${1}" | $Xsed -e "$lo2o"`
+}
 
-  ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X`
-  if test $ac_delim_n = $ac_delim_num; then
-    break
-  elif $ac_last_try; then
-    { { $as_echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5
-$as_echo "$as_me: error: could not make $CONFIG_STATUS" >&2;}
-   { (exit 1); exit 1; }; }
-  else
-    ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
-  fi
-done
-rm -f conf$$subs.sh
+# func_xform libobj-or-source
+func_xform ()
+{
+  func_xform_result=`$ECHO "X${1}" | $Xsed -e 's/\.[^.]*$/.lo/'`
+}
 
-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
-cat >>"\$tmp/subs1.awk" <<\\_ACAWK &&
-_ACEOF
-sed -n '
-h
-s/^/S["/; s/!.*/"]=/
-p
-g
-s/^[^!]*!//
-:repl
-t repl
-s/'"$ac_delim"'$//
-t delim
-:nl
-h
-s/\(.\{148\}\).*/\1/
-t more1
-s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/
-p
-n
-b repl
-:more1
-s/["\\]/\\&/g; s/^/"/; s/$/"\\/
-p
-g
-s/.\{148\}//
-t nl
-:delim
-h
-s/\(.\{148\}\).*/\1/
-t more2
-s/["\\]/\\&/g; s/^/"/; s/$/"/
-p
-b
-:more2
-s/["\\]/\\&/g; s/^/"/; s/$/"\\/
-p
-g
-s/.\{148\}//
-t delim
-' <conf$$subs.awk | sed '
-/^[^""]/{
-  N
-  s/\n//
+# func_arith arithmetic-term...
+func_arith ()
+{
+  func_arith_result=`expr "$@"`
 }
-' >>$CONFIG_STATUS || ac_write_fail=1
-rm -f conf$$subs.awk
-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
-_ACAWK
-cat >>"\$tmp/subs1.awk" <<_ACAWK &&
-  for (key in S) S_is_set[key] = 1
-  FS = ""
 
+# func_len string
+# STRING may not start with a hyphen.
+func_len ()
+{
+  func_len_result=`expr "$1" : ".*" 2>/dev/null || echo $max_cmd_len`
 }
+
+_LT_EOF
+esac
+
+case $lt_shell_append in
+  yes)
+    cat << \_LT_EOF >> "$cfgfile"
+
+# func_append var value
+# Append VALUE to the end of shell variable VAR.
+func_append ()
 {
-  line = $ 0
-  nfields = split(line, field, "@")
-  substed = 0
-  len = length(field[1])
-  for (i = 2; i < nfields; i++) {
-    key = field[i]
-    keylen = length(key)
-    if (S_is_set[key]) {
-      value = S[key]
-      line = substr(line, 1, len) "" value "" substr(line, len + keylen + 3)
-      len += length(value) + length(field[++i])
-      substed = 1
-    } else
-      len += 1 + keylen
-  }
+  eval "$1+=\$2"
+}
+_LT_EOF
+    ;;
+  *)
+    cat << \_LT_EOF >> "$cfgfile"
 
-  print line
+# func_append var value
+# Append VALUE to the end of shell variable VAR.
+func_append ()
+{
+  eval "$1=\$$1\$2"
 }
 
-_ACAWK
-_ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then
-  sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g"
-else
-  cat
-fi < "$tmp/subs1.awk" > "$tmp/subs.awk" \
-  || { { $as_echo "$as_me:$LINENO: error: could not setup config files machinery" >&5
-$as_echo "$as_me: error: could not setup config files machinery" >&2;}
-   { (exit 1); exit 1; }; }
-_ACEOF
+_LT_EOF
+    ;;
+  esac
 
-# VPATH may cause trouble with some makes, so we remove $(srcdir),
-# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and
-# trailing colons and then remove the whole line if VPATH becomes empty
-# (actually we leave an empty line to preserve line numbers).
-if test "x$srcdir" = x.; then
-  ac_vpsub='/^[	 ]*VPATH[	 ]*=/{
-s/:*\$(srcdir):*/:/
-s/:*\${srcdir}:*/:/
-s/:*@srcdir@:*/:/
-s/^\([^=]*=[	 ]*\):*/\1/
-s/:*$//
-s/^[^=]*=[	 ]*$//
-}'
-fi
 
-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-fi # test -n "$CONFIG_FILES"
+  sed -n '/^# Generated shell functions inserted here/,$p' "$ltmain" >> "$cfgfile" \
+    || (rm -f "$cfgfile"; exit 1)
 
-# Set up the scripts for CONFIG_HEADERS section.
-# No need to generate them if there are no CONFIG_HEADERS.
-# This happens for instance with `./config.status Makefile'.
-if test -n "$CONFIG_HEADERS"; then
-cat >"$tmp/defines.awk" <<\_ACAWK ||
-BEGIN {
-_ACEOF
+  mv -f "$cfgfile" "$ofile" ||
+    (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")
+  chmod +x "$ofile"
 
-# Transform confdefs.h into an awk script `defines.awk', embedded as
-# here-document in config.status, that substitutes the proper values into
-# config.h.in to produce config.h.
 
-# Create a delimiter string that does not exist in confdefs.h, to ease
-# handling of long lines.
-ac_delim='%!_!# '
-for ac_last_try in false false :; do
-  ac_t=`sed -n "/$ac_delim/p" confdefs.h`
-  if test -z "$ac_t"; then
-    break
-  elif $ac_last_try; then
-    { { $as_echo "$as_me:$LINENO: error: could not make $CONFIG_HEADERS" >&5
-$as_echo "$as_me: error: could not make $CONFIG_HEADERS" >&2;}
-   { (exit 1); exit 1; }; }
-  else
-    ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
-  fi
-done
+    cat <<_LT_EOF >> "$ofile"
 
-# For the awk script, D is an array of macro values keyed by name,
-# likewise P contains macro parameters if any.  Preserve backslash
-# newline sequences.
+# ### BEGIN LIBTOOL TAG CONFIG: CXX
+
+# The linker used to build libraries.
+LD=$lt_LD_CXX
+
+# Commands used to build an old-style archive.
+old_archive_cmds=$lt_old_archive_cmds_CXX
+
+# A language specific compiler.
+CC=$lt_compiler_CXX
+
+# Is the compiler the GNU compiler?
+with_gcc=$GCC_CXX
+
+# Compiler flag to turn off builtin functions.
+no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_CXX
+
+# How to pass a linker flag through the compiler.
+wl=$lt_lt_prog_compiler_wl_CXX
+
+# Additional compiler flags for building library objects.
+pic_flag=$lt_lt_prog_compiler_pic_CXX
+
+# Compiler flag to prevent dynamic linking.
+link_static_flag=$lt_lt_prog_compiler_static_CXX
+
+# Does compiler simultaneously support -c and -o options?
+compiler_c_o=$lt_lt_cv_prog_compiler_c_o_CXX
+
+# Whether or not to add -lc for building shared libraries.
+build_libtool_need_lc=$archive_cmds_need_lc_CXX
+
+# Whether or not to disallow shared libs when runtime libs are static.
+allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes_CXX
+
+# Compiler flag to allow reflexive dlopens.
+export_dynamic_flag_spec=$lt_export_dynamic_flag_spec_CXX
+
+# Compiler flag to generate shared objects directly from archives.
+whole_archive_flag_spec=$lt_whole_archive_flag_spec_CXX
+
+# Whether the compiler copes with passing no objects directly.
+compiler_needs_object=$lt_compiler_needs_object_CXX
+
+# Create an old-style archive from a shared archive.
+old_archive_from_new_cmds=$lt_old_archive_from_new_cmds_CXX
+
+# Create a temporary old-style archive to link instead of a shared archive.
+old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds_CXX
+
+# Commands used to build a shared archive.
+archive_cmds=$lt_archive_cmds_CXX
+archive_expsym_cmds=$lt_archive_expsym_cmds_CXX
+
+# Commands used to build a loadable module if different from building
+# a shared archive.
+module_cmds=$lt_module_cmds_CXX
+module_expsym_cmds=$lt_module_expsym_cmds_CXX
+
+# Whether we are building with GNU ld or not.
+with_gnu_ld=$lt_with_gnu_ld_CXX
+
+# Flag that allows shared libraries with undefined symbols to be built.
+allow_undefined_flag=$lt_allow_undefined_flag_CXX
+
+# Flag that enforces no undefined symbols.
+no_undefined_flag=$lt_no_undefined_flag_CXX
+
+# Flag to hardcode \$libdir into a binary during linking.
+# This must work even if \$libdir does not exist
+hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_CXX
 
-ac_word_re=[_$as_cr_Letters][_$as_cr_alnum]*
-sed -n '
-s/.\{148\}/&'"$ac_delim"'/g
-t rset
-:rset
-s/^[	 ]*#[	 ]*define[	 ][	 ]*/ /
-t def
-d
-:def
-s/\\$//
-t bsnl
-s/["\\]/\\&/g
-s/^ \('"$ac_word_re"'\)\(([^()]*)\)[	 ]*\(.*\)/P["\1"]="\2"\
-D["\1"]=" \3"/p
-s/^ \('"$ac_word_re"'\)[	 ]*\(.*\)/D["\1"]=" \2"/p
-d
-:bsnl
-s/["\\]/\\&/g
-s/^ \('"$ac_word_re"'\)\(([^()]*)\)[	 ]*\(.*\)/P["\1"]="\2"\
-D["\1"]=" \3\\\\\\n"\\/p
-t cont
-s/^ \('"$ac_word_re"'\)[	 ]*\(.*\)/D["\1"]=" \2\\\\\\n"\\/p
-t cont
-d
-:cont
-n
-s/.\{148\}/&'"$ac_delim"'/g
-t clear
-:clear
-s/\\$//
-t bsnlc
-s/["\\]/\\&/g; s/^/"/; s/$/"/p
-d
-:bsnlc
-s/["\\]/\\&/g; s/^/"/; s/$/\\\\\\n"\\/p
-b cont
-' <confdefs.h | sed '
-s/'"$ac_delim"'/"\\\
-"/g' >>$CONFIG_STATUS || ac_write_fail=1
+# If ld is used when linking, flag to hardcode \$libdir into a binary
+# during linking.  This must work even if \$libdir does not exist.
+hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_CXX
 
-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
-  for (key in D) D_is_set[key] = 1
-  FS = ""
-}
-/^[\t ]*#[\t ]*(define|undef)[\t ]+$ac_word_re([\t (]|\$)/ {
-  line = \$ 0
-  split(line, arg, " ")
-  if (arg[1] == "#") {
-    defundef = arg[2]
-    mac1 = arg[3]
-  } else {
-    defundef = substr(arg[1], 2)
-    mac1 = arg[2]
-  }
-  split(mac1, mac2, "(") #)
-  macro = mac2[1]
-  prefix = substr(line, 1, index(line, defundef) - 1)
-  if (D_is_set[macro]) {
-    # Preserve the white space surrounding the "#".
-    print prefix "define", macro P[macro] D[macro]
-    next
-  } else {
-    # Replace #undef with comments.  This is necessary, for example,
-    # in the case of _POSIX_SOURCE, which is predefined and required
-    # on some systems where configure will not decide to define it.
-    if (defundef == "undef") {
-      print "/*", prefix defundef, macro, "*/"
-      next
-    }
-  }
-}
-{ print }
-_ACAWK
-_ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-  { { $as_echo "$as_me:$LINENO: error: could not setup config headers machinery" >&5
-$as_echo "$as_me: error: could not setup config headers machinery" >&2;}
-   { (exit 1); exit 1; }; }
-fi # test -n "$CONFIG_HEADERS"
+# Whether we need a single "-rpath" flag with a separated argument.
+hardcode_libdir_separator=$lt_hardcode_libdir_separator_CXX
 
+# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes
+# DIR into the resulting binary.
+hardcode_direct=$hardcode_direct_CXX
 
-eval set X "  :F $CONFIG_FILES  :H $CONFIG_HEADERS    :C $CONFIG_COMMANDS"
-shift
-for ac_tag
-do
-  case $ac_tag in
-  :[FHLC]) ac_mode=$ac_tag; continue;;
-  esac
-  case $ac_mode$ac_tag in
-  :[FHL]*:*);;
-  :L* | :C*:*) { { $as_echo "$as_me:$LINENO: error: invalid tag $ac_tag" >&5
-$as_echo "$as_me: error: invalid tag $ac_tag" >&2;}
-   { (exit 1); exit 1; }; };;
-  :[FH]-) ac_tag=-:-;;
-  :[FH]*) ac_tag=$ac_tag:$ac_tag.in;;
-  esac
-  ac_save_IFS=$IFS
-  IFS=:
-  set x $ac_tag
-  IFS=$ac_save_IFS
-  shift
-  ac_file=$1
-  shift
+# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes
+# DIR into the resulting binary and the resulting library dependency is
+# "absolute",i.e impossible to change by setting \${shlibpath_var} if the
+# library is relocated.
+hardcode_direct_absolute=$hardcode_direct_absolute_CXX
 
-  case $ac_mode in
-  :L) ac_source=$1;;
-  :[FH])
-    ac_file_inputs=
-    for ac_f
-    do
-      case $ac_f in
-      -) ac_f="$tmp/stdin";;
-      *) # Look for the file first in the build tree, then in the source tree
-	 # (if the path is not absolute).  The absolute path cannot be DOS-style,
-	 # because $ac_f cannot contain `:'.
-	 test -f "$ac_f" ||
-	   case $ac_f in
-	   [\\/$]*) false;;
-	   *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";;
-	   esac ||
-	   { { $as_echo "$as_me:$LINENO: error: cannot find input file: $ac_f" >&5
-$as_echo "$as_me: error: cannot find input file: $ac_f" >&2;}
-   { (exit 1); exit 1; }; };;
-      esac
-      case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac
-      ac_file_inputs="$ac_file_inputs '$ac_f'"
-    done
+# Set to "yes" if using the -LDIR flag during linking hardcodes DIR
+# into the resulting binary.
+hardcode_minus_L=$hardcode_minus_L_CXX
 
-    # Let's still pretend it is `configure' which instantiates (i.e., don't
-    # use $as_me), people would be surprised to read:
-    #    /* config.h.  Generated by config.status.  */
-    configure_input='Generated from '`
-	  $as_echo "$*" | sed 's|^[^:]*/||;s|:[^:]*/|, |g'
-	`' by configure.'
-    if test x"$ac_file" != x-; then
-      configure_input="$ac_file.  $configure_input"
-      { $as_echo "$as_me:$LINENO: creating $ac_file" >&5
-$as_echo "$as_me: creating $ac_file" >&6;}
-    fi
-    # Neutralize special characters interpreted by sed in replacement strings.
-    case $configure_input in #(
-    *\&* | *\|* | *\\* )
-       ac_sed_conf_input=`$as_echo "$configure_input" |
-       sed 's/[\\\\&|]/\\\\&/g'`;; #(
-    *) ac_sed_conf_input=$configure_input;;
-    esac
+# Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR
+# into the resulting binary.
+hardcode_shlibpath_var=$hardcode_shlibpath_var_CXX
 
-    case $ac_tag in
-    *:-:* | *:-) cat >"$tmp/stdin" \
-      || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5
-$as_echo "$as_me: error: could not create $ac_file" >&2;}
-   { (exit 1); exit 1; }; } ;;
-    esac
-    ;;
-  esac
+# Set to "yes" if building a shared library automatically hardcodes DIR
+# into the library and all subsequent libraries and executables linked
+# against it.
+hardcode_automatic=$hardcode_automatic_CXX
 
-  ac_dir=`$as_dirname -- "$ac_file" ||
-$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-	 X"$ac_file" : 'X\(//\)[^/]' \| \
-	 X"$ac_file" : 'X\(//\)$' \| \
-	 X"$ac_file" : 'X\(/\)' \| . 2>/dev/null ||
-$as_echo X"$ac_file" |
-    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
-	    s//\1/
-	    q
-	  }
-	  /^X\(\/\/\)[^/].*/{
-	    s//\1/
-	    q
-	  }
-	  /^X\(\/\/\)$/{
-	    s//\1/
-	    q
-	  }
-	  /^X\(\/\).*/{
-	    s//\1/
-	    q
-	  }
-	  s/.*/./; q'`
-  { as_dir="$ac_dir"
-  case $as_dir in #(
-  -*) as_dir=./$as_dir;;
-  esac
-  test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || {
-    as_dirs=
-    while :; do
-      case $as_dir in #(
-      *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
-      *) as_qdir=$as_dir;;
-      esac
-      as_dirs="'$as_qdir' $as_dirs"
-      as_dir=`$as_dirname -- "$as_dir" ||
-$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-	 X"$as_dir" : 'X\(//\)[^/]' \| \
-	 X"$as_dir" : 'X\(//\)$' \| \
-	 X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
-$as_echo X"$as_dir" |
-    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
-	    s//\1/
-	    q
-	  }
-	  /^X\(\/\/\)[^/].*/{
-	    s//\1/
-	    q
-	  }
-	  /^X\(\/\/\)$/{
-	    s//\1/
-	    q
-	  }
-	  /^X\(\/\).*/{
-	    s//\1/
-	    q
-	  }
-	  s/.*/./; q'`
-      test -d "$as_dir" && break
-    done
-    test -z "$as_dirs" || eval "mkdir $as_dirs"
-  } || test -d "$as_dir" || { { $as_echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5
-$as_echo "$as_me: error: cannot create directory $as_dir" >&2;}
-   { (exit 1); exit 1; }; }; }
-  ac_builddir=.
+# Set to yes if linker adds runtime paths of dependent libraries
+# to runtime path list.
+inherit_rpath=$inherit_rpath_CXX
 
-case "$ac_dir" in
-.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
-*)
-  ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
-  # A ".." for each directory in $ac_dir_suffix.
-  ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
-  case $ac_top_builddir_sub in
-  "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
-  *)  ac_top_build_prefix=$ac_top_builddir_sub/ ;;
-  esac ;;
-esac
-ac_abs_top_builddir=$ac_pwd
-ac_abs_builddir=$ac_pwd$ac_dir_suffix
-# for backward compatibility:
-ac_top_builddir=$ac_top_build_prefix
+# Whether libtool must link a program against all its dependency libraries.
+link_all_deplibs=$link_all_deplibs_CXX
 
-case $srcdir in
-  .)  # We are building in place.
-    ac_srcdir=.
-    ac_top_srcdir=$ac_top_builddir_sub
-    ac_abs_top_srcdir=$ac_pwd ;;
-  [\\/]* | ?:[\\/]* )  # Absolute name.
-    ac_srcdir=$srcdir$ac_dir_suffix;
-    ac_top_srcdir=$srcdir
-    ac_abs_top_srcdir=$srcdir ;;
-  *) # Relative name.
-    ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
-    ac_top_srcdir=$ac_top_build_prefix$srcdir
-    ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
-esac
-ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
+# Fix the shell variable \$srcfile for the compiler.
+fix_srcfile_path=$lt_fix_srcfile_path_CXX
 
+# Set to "yes" if exported symbols are required.
+always_export_symbols=$always_export_symbols_CXX
 
-  case $ac_mode in
-  :F)
-  #
-  # CONFIG_FILE
-  #
+# The commands to list exported symbols.
+export_symbols_cmds=$lt_export_symbols_cmds_CXX
 
-  case $INSTALL in
-  [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;;
-  *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;;
-  esac
-  ac_MKDIR_P=$MKDIR_P
-  case $MKDIR_P in
-  [\\/$]* | ?:[\\/]* ) ;;
-  */*) ac_MKDIR_P=$ac_top_build_prefix$MKDIR_P ;;
-  esac
-_ACEOF
+# Symbols that should not be listed in the preloaded symbols.
+exclude_expsyms=$lt_exclude_expsyms_CXX
+
+# Symbols that must always be exported.
+include_expsyms=$lt_include_expsyms_CXX
 
-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-# If the template does not know about datarootdir, expand it.
-# FIXME: This hack should be removed a few years after 2.60.
-ac_datarootdir_hack=; ac_datarootdir_seen=
+# Commands necessary for linking programs (against libraries) with templates.
+prelink_cmds=$lt_prelink_cmds_CXX
 
-ac_sed_dataroot='
-/datarootdir/ {
-  p
-  q
-}
-/@datadir@/p
-/@docdir@/p
-/@infodir@/p
-/@localedir@/p
-/@mandir@/p
-'
-case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in
-*datarootdir*) ac_datarootdir_seen=yes;;
-*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*)
-  { $as_echo "$as_me:$LINENO: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5
-$as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;}
-_ACEOF
-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
-  ac_datarootdir_hack='
-  s&@datadir@&$datadir&g
-  s&@docdir@&$docdir&g
-  s&@infodir@&$infodir&g
-  s&@localedir@&$localedir&g
-  s&@mandir@&$mandir&g
-    s&\\\${datarootdir}&$datarootdir&g' ;;
-esac
-_ACEOF
+# Specify filename containing input files.
+file_list_spec=$lt_file_list_spec_CXX
 
-# Neutralize VPATH when `$srcdir' = `.'.
-# Shell code in configure.ac might set extrasub.
-# FIXME: do we really want to maintain this feature?
-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
-ac_sed_extra="$ac_vpsub
-$extrasub
-_ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-:t
-/@[a-zA-Z_][a-zA-Z_0-9]*@/!b
-s|@configure_input@|$ac_sed_conf_input|;t t
-s&@top_builddir@&$ac_top_builddir_sub&;t t
-s&@top_build_prefix@&$ac_top_build_prefix&;t t
-s&@srcdir@&$ac_srcdir&;t t
-s&@abs_srcdir@&$ac_abs_srcdir&;t t
-s&@top_srcdir@&$ac_top_srcdir&;t t
-s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t
-s&@builddir@&$ac_builddir&;t t
-s&@abs_builddir@&$ac_abs_builddir&;t t
-s&@abs_top_builddir@&$ac_abs_top_builddir&;t t
-s&@INSTALL@&$ac_INSTALL&;t t
-s&@MKDIR_P@&$ac_MKDIR_P&;t t
-$ac_datarootdir_hack
-"
-eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$tmp/subs.awk" >$tmp/out \
-  || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5
-$as_echo "$as_me: error: could not create $ac_file" >&2;}
-   { (exit 1); exit 1; }; }
+# How to hardcode a shared library path into an executable.
+hardcode_action=$hardcode_action_CXX
 
-test -z "$ac_datarootdir_hack$ac_datarootdir_seen" &&
-  { ac_out=`sed -n '/\${datarootdir}/p' "$tmp/out"`; test -n "$ac_out"; } &&
-  { ac_out=`sed -n '/^[	 ]*datarootdir[	 ]*:*=/p' "$tmp/out"`; test -z "$ac_out"; } &&
-  { $as_echo "$as_me:$LINENO: WARNING: $ac_file contains a reference to the variable \`datarootdir'
-which seems to be undefined.  Please make sure it is defined." >&5
-$as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir'
-which seems to be undefined.  Please make sure it is defined." >&2;}
+# The directories searched by this compiler when creating a shared library.
+compiler_lib_search_dirs=$lt_compiler_lib_search_dirs_CXX
 
-  rm -f "$tmp/stdin"
-  case $ac_file in
-  -) cat "$tmp/out" && rm -f "$tmp/out";;
-  *) rm -f "$ac_file" && mv "$tmp/out" "$ac_file";;
-  esac \
-  || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5
-$as_echo "$as_me: error: could not create $ac_file" >&2;}
-   { (exit 1); exit 1; }; }
- ;;
-  :H)
-  #
-  # CONFIG_HEADER
-  #
-  if test x"$ac_file" != x-; then
-    {
-      $as_echo "/* $configure_input  */" \
-      && eval '$AWK -f "$tmp/defines.awk"' "$ac_file_inputs"
-    } >"$tmp/config.h" \
-      || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5
-$as_echo "$as_me: error: could not create $ac_file" >&2;}
-   { (exit 1); exit 1; }; }
-    if diff "$ac_file" "$tmp/config.h" >/dev/null 2>&1; then
-      { $as_echo "$as_me:$LINENO: $ac_file is unchanged" >&5
-$as_echo "$as_me: $ac_file is unchanged" >&6;}
-    else
-      rm -f "$ac_file"
-      mv "$tmp/config.h" "$ac_file" \
-	|| { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5
-$as_echo "$as_me: error: could not create $ac_file" >&2;}
-   { (exit 1); exit 1; }; }
-    fi
-  else
-    $as_echo "/* $configure_input  */" \
-      && eval '$AWK -f "$tmp/defines.awk"' "$ac_file_inputs" \
-      || { { $as_echo "$as_me:$LINENO: error: could not create -" >&5
-$as_echo "$as_me: error: could not create -" >&2;}
-   { (exit 1); exit 1; }; }
-  fi
-# Compute "$ac_file"'s index in $config_headers.
-_am_arg="$ac_file"
-_am_stamp_count=1
-for _am_header in $config_headers :; do
-  case $_am_header in
-    $_am_arg | $_am_arg:* )
-      break ;;
-    * )
-      _am_stamp_count=`expr $_am_stamp_count + 1` ;;
-  esac
-done
-echo "timestamp for $_am_arg" >`$as_dirname -- "$_am_arg" ||
-$as_expr X"$_am_arg" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-	 X"$_am_arg" : 'X\(//\)[^/]' \| \
-	 X"$_am_arg" : 'X\(//\)$' \| \
-	 X"$_am_arg" : 'X\(/\)' \| . 2>/dev/null ||
-$as_echo X"$_am_arg" |
-    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
-	    s//\1/
-	    q
-	  }
-	  /^X\(\/\/\)[^/].*/{
-	    s//\1/
-	    q
-	  }
-	  /^X\(\/\/\)$/{
-	    s//\1/
-	    q
-	  }
-	  /^X\(\/\).*/{
-	    s//\1/
-	    q
-	  }
-	  s/.*/./; q'`/stamp-h$_am_stamp_count
- ;;
+# Dependencies to place before and after the objects being linked to
+# create a shared library.
+predep_objects=$lt_predep_objects_CXX
+postdep_objects=$lt_postdep_objects_CXX
+predeps=$lt_predeps_CXX
+postdeps=$lt_postdeps_CXX
 
-  :C)  { $as_echo "$as_me:$LINENO: executing $ac_file commands" >&5
-$as_echo "$as_me: executing $ac_file commands" >&6;}
- ;;
-  esac
+# The library search path used internally by the compiler when linking
+# a shared library.
+compiler_lib_search_path=$lt_compiler_lib_search_path_CXX
 
+# ### END LIBTOOL TAG CONFIG: CXX
+_LT_EOF
 
-  case $ac_file$ac_mode in
-    "depfiles":C) test x"$AMDEP_TRUE" != x"" || for mf in $CONFIG_FILES; do
-  # Strip MF so we end up with the name of the file.
-  mf=`echo "$mf" | sed -e 's/:.*$//'`
-  # Check whether this is an Automake generated Makefile or not.
-  # We used to match only the files named `Makefile.in', but
-  # some people rename them; so instead we look at the file content.
-  # Grep'ing the first line is not enough: some people post-process
-  # each Makefile.in and add a new line on top of each file to say so.
-  # Grep'ing the whole file is not good either: AIX grep has a line
-  # limit of 2048, but all sed's we know have understand at least 4000.
-  if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then
-    dirpart=`$as_dirname -- "$mf" ||
-$as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-	 X"$mf" : 'X\(//\)[^/]' \| \
-	 X"$mf" : 'X\(//\)$' \| \
-	 X"$mf" : 'X\(/\)' \| . 2>/dev/null ||
-$as_echo X"$mf" |
-    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
-	    s//\1/
-	    q
-	  }
-	  /^X\(\/\/\)[^/].*/{
-	    s//\1/
-	    q
-	  }
-	  /^X\(\/\/\)$/{
-	    s//\1/
-	    q
-	  }
-	  /^X\(\/\).*/{
-	    s//\1/
-	    q
-	  }
-	  s/.*/./; q'`
-  else
-    continue
-  fi
-  # Extract the definition of DEPDIR, am__include, and am__quote
-  # from the Makefile without running `make'.
-  DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
-  test -z "$DEPDIR" && continue
-  am__include=`sed -n 's/^am__include = //p' < "$mf"`
-  test -z "am__include" && continue
-  am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
-  # When using ansi2knr, U may be empty or an underscore; expand it
-  U=`sed -n 's/^U = //p' < "$mf"`
-  # Find all dependency output files, they are included files with
-  # $(DEPDIR) in their names.  We invoke sed twice because it is the
-  # simplest approach to changing $(DEPDIR) to its actual value in the
-  # expansion.
-  for file in `sed -n "
-    s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
-       sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
-    # Make sure the directory exists.
-    test -f "$dirpart/$file" && continue
-    fdir=`$as_dirname -- "$file" ||
-$as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-	 X"$file" : 'X\(//\)[^/]' \| \
-	 X"$file" : 'X\(//\)$' \| \
-	 X"$file" : 'X\(/\)' \| . 2>/dev/null ||
-$as_echo X"$file" |
-    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
-	    s//\1/
-	    q
-	  }
-	  /^X\(\/\/\)[^/].*/{
-	    s//\1/
-	    q
-	  }
-	  /^X\(\/\/\)$/{
-	    s//\1/
-	    q
-	  }
-	  /^X\(\/\).*/{
-	    s//\1/
-	    q
-	  }
-	  s/.*/./; q'`
-    { as_dir=$dirpart/$fdir
-  case $as_dir in #(
-  -*) as_dir=./$as_dir;;
-  esac
-  test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || {
-    as_dirs=
-    while :; do
-      case $as_dir in #(
-      *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
-      *) as_qdir=$as_dir;;
-      esac
-      as_dirs="'$as_qdir' $as_dirs"
-      as_dir=`$as_dirname -- "$as_dir" ||
-$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-	 X"$as_dir" : 'X\(//\)[^/]' \| \
-	 X"$as_dir" : 'X\(//\)$' \| \
-	 X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
-$as_echo X"$as_dir" |
-    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
-	    s//\1/
-	    q
-	  }
-	  /^X\(\/\/\)[^/].*/{
-	    s//\1/
-	    q
-	  }
-	  /^X\(\/\/\)$/{
-	    s//\1/
-	    q
-	  }
-	  /^X\(\/\).*/{
-	    s//\1/
-	    q
-	  }
-	  s/.*/./; q'`
-      test -d "$as_dir" && break
-    done
-    test -z "$as_dirs" || eval "mkdir $as_dirs"
-  } || test -d "$as_dir" || { { $as_echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5
-$as_echo "$as_me: error: cannot create directory $as_dir" >&2;}
-   { (exit 1); exit 1; }; }; }
-    # echo "creating $dirpart/$file"
-    echo '# dummy' > "$dirpart/$file"
-  done
-done
  ;;
 
   esac
 done # for ac_tag
 
 
-{ (exit 0); exit 0; }
+as_fn_exit 0
 _ACEOF
-chmod +x $CONFIG_STATUS
 ac_clean_files=$ac_clean_files_save
 
 test $ac_write_fail = 0 ||
-  { { $as_echo "$as_me:$LINENO: error: write failure creating $CONFIG_STATUS" >&5
-$as_echo "$as_me: error: write failure creating $CONFIG_STATUS" >&2;}
-   { (exit 1); exit 1; }; }
+  as_fn_error "write failure creating $CONFIG_STATUS" "$LINENO" 5
 
 export OU_NAMESPACE=odeou
 
@@ -27597,7 +20042,7 @@
   exec 5>>config.log
   # Use ||, not &&, to avoid exiting from the if with $? = 1, which
   # would make configure fail if this is the last instruction.
-  $ac_cs_success || { (exit 1); exit 1; }
+  $ac_cs_success || as_fn_exit $?
 fi
 
 #
@@ -27641,7 +20086,7 @@
       case $ac_arg in
       *\'*) ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
       esac
-      ac_sub_configure_args="$ac_sub_configure_args '$ac_arg'" ;;
+      as_fn_append ac_sub_configure_args " '$ac_arg'" ;;
     esac
   done
 
@@ -27670,49 +20115,9 @@
     test -d "$srcdir/$ac_dir" || continue
 
     ac_msg="=== configuring in $ac_dir (`pwd`/$ac_dir)"
-    $as_echo "$as_me:$LINENO: $ac_msg" >&5
+    $as_echo "$as_me:${as_lineno-$LINENO}: $ac_msg" >&5
     $as_echo "$ac_msg" >&6
-    { as_dir="$ac_dir"
-  case $as_dir in #(
-  -*) as_dir=./$as_dir;;
-  esac
-  test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || {
-    as_dirs=
-    while :; do
-      case $as_dir in #(
-      *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
-      *) as_qdir=$as_dir;;
-      esac
-      as_dirs="'$as_qdir' $as_dirs"
-      as_dir=`$as_dirname -- "$as_dir" ||
-$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-	 X"$as_dir" : 'X\(//\)[^/]' \| \
-	 X"$as_dir" : 'X\(//\)$' \| \
-	 X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
-$as_echo X"$as_dir" |
-    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
-	    s//\1/
-	    q
-	  }
-	  /^X\(\/\/\)[^/].*/{
-	    s//\1/
-	    q
-	  }
-	  /^X\(\/\/\)$/{
-	    s//\1/
-	    q
-	  }
-	  /^X\(\/\).*/{
-	    s//\1/
-	    q
-	  }
-	  s/.*/./; q'`
-      test -d "$as_dir" && break
-    done
-    test -z "$as_dirs" || eval "mkdir $as_dirs"
-  } || test -d "$as_dir" || { { $as_echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5
-$as_echo "$as_me: error: cannot create directory $as_dir" >&2;}
-   { (exit 1); exit 1; }; }; }
+    as_dir="$ac_dir"; as_fn_mkdir_p
     ac_builddir=.
 
 case "$ac_dir" in
@@ -27759,7 +20164,7 @@
       # This should be Cygnus configure.
       ac_sub_configure=$ac_aux_dir/configure
     else
-      { $as_echo "$as_me:$LINENO: WARNING: no configuration information is in $ac_dir" >&5
+      { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: no configuration information is in $ac_dir" >&5
 $as_echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2;}
       ac_sub_configure=
     fi
@@ -27773,21 +20178,19 @@
 	ac_sub_cache_file=$ac_top_build_prefix$cache_file ;;
       esac
 
-      { $as_echo "$as_me:$LINENO: running $SHELL $ac_sub_configure $ac_sub_configure_args --cache-file=$ac_sub_cache_file --srcdir=$ac_srcdir" >&5
+      { $as_echo "$as_me:${as_lineno-$LINENO}: running $SHELL $ac_sub_configure $ac_sub_configure_args --cache-file=$ac_sub_cache_file --srcdir=$ac_srcdir" >&5
 $as_echo "$as_me: running $SHELL $ac_sub_configure $ac_sub_configure_args --cache-file=$ac_sub_cache_file --srcdir=$ac_srcdir" >&6;}
       # The eval makes quoting arguments work.
       eval "\$SHELL \"\$ac_sub_configure\" $ac_sub_configure_args \
 	   --cache-file=\"\$ac_sub_cache_file\" --srcdir=\"\$ac_srcdir\"" ||
-	{ { $as_echo "$as_me:$LINENO: error: $ac_sub_configure failed for $ac_dir" >&5
-$as_echo "$as_me: error: $ac_sub_configure failed for $ac_dir" >&2;}
-   { (exit 1); exit 1; }; }
+	as_fn_error "$ac_sub_configure failed for $ac_dir" "$LINENO" 5
     fi
 
     cd "$ac_popdir"
   done
 fi
 if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then
-  { $as_echo "$as_me:$LINENO: WARNING: unrecognized options: $ac_unrecognized_opts" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: unrecognized options: $ac_unrecognized_opts" >&5
 $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2;}
 fi
 
--- ode-0.11.orig/depcomp
+++ ode-0.11/depcomp
@@ -1,10 +1,10 @@
 #! /bin/sh
 # depcomp - compile a program generating dependencies as side-effects
 
-scriptversion=2007-03-29.01
+scriptversion=2009-04-28.21; # UTC
 
-# Copyright (C) 1999, 2000, 2003, 2004, 2005, 2006, 2007 Free Software
-# Foundation, Inc.
+# Copyright (C) 1999, 2000, 2003, 2004, 2005, 2006, 2007, 2009 Free
+# Software Foundation, Inc.
 
 # This program is free software; you can redistribute it and/or modify
 # it under the terms of the GNU General Public License as published by
@@ -17,9 +17,7 @@
 # GNU General Public License for more details.
 
 # You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
-# 02110-1301, USA.
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 # As a special exception to the GNU General Public License, if you
 # distribute this file as part of a program that contains a
@@ -87,6 +85,15 @@
    depmode=dashmstdout
 fi
 
+cygpath_u="cygpath -u -f -"
+if test "$depmode" = msvcmsys; then
+   # This is just like msvisualcpp but w/o cygpath translation.
+   # Just convert the backslash-escaped backslashes to single forward
+   # slashes to satisfy depend.m4
+   cygpath_u="sed s,\\\\\\\\,/,g"
+   depmode=msvisualcpp
+fi
+
 case "$depmode" in
 gcc3)
 ## gcc 3 implements dependency tracking that does exactly what
@@ -192,14 +199,14 @@
 ' < "$tmpdepfile" \
     | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' | \
     tr '
-' ' ' >> $depfile
-    echo >> $depfile
+' ' ' >> "$depfile"
+    echo >> "$depfile"
 
     # The second pass generates a dummy entry for each header file.
     tr ' ' '
 ' < "$tmpdepfile" \
    | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \
-   >> $depfile
+   >> "$depfile"
   else
     # The sourcefile does not contain any dependencies, so just
     # store a dummy comment line, to avoid errors with the Makefile
@@ -328,7 +335,12 @@
   if test -f "$tmpdepfile"; then
     sed -e "s,^.*\.[a-z]*:,$object:," "$tmpdepfile" > "$depfile"
     # Add `dependent.h:' lines.
-    sed -ne '2,${; s/^ *//; s/ \\*$//; s/$/:/; p;}' "$tmpdepfile" >> "$depfile"
+    sed -ne '2,${
+	       s/^ *//
+	       s/ \\*$//
+	       s/$/:/
+	       p
+	     }' "$tmpdepfile" >> "$depfile"
   else
     echo "#dummy" > "$depfile"
   fi
@@ -404,7 +416,7 @@
 
   # Remove the call to Libtool.
   if test "$libtool" = yes; then
-    while test $1 != '--mode=compile'; do
+    while test "X$1" != 'X--mode=compile'; do
       shift
     done
     shift
@@ -455,32 +467,39 @@
   "$@" || exit $?
   # Remove any Libtool call
   if test "$libtool" = yes; then
-    while test $1 != '--mode=compile'; do
+    while test "X$1" != 'X--mode=compile'; do
       shift
     done
     shift
   fi
   # X makedepend
   shift
-  cleared=no
-  for arg in "$@"; do
+  cleared=no eat=no
+  for arg
+  do
     case $cleared in
     no)
       set ""; shift
       cleared=yes ;;
     esac
+    if test $eat = yes; then
+      eat=no
+      continue
+    fi
     case "$arg" in
     -D*|-I*)
       set fnord "$@" "$arg"; shift ;;
     # Strip any option that makedepend may not understand.  Remove
     # the object too, otherwise makedepend will parse it as a source file.
+    -arch)
+      eat=yes ;;
     -*|$object)
       ;;
     *)
       set fnord "$@" "$arg"; shift ;;
     esac
   done
-  obj_suffix="`echo $object | sed 's/^.*\././'`"
+  obj_suffix=`echo "$object" | sed 's/^.*\././'`
   touch "$tmpdepfile"
   ${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@"
   rm -f "$depfile"
@@ -500,7 +519,7 @@
 
   # Remove the call to Libtool.
   if test "$libtool" = yes; then
-    while test $1 != '--mode=compile'; do
+    while test "X$1" != 'X--mode=compile'; do
       shift
     done
     shift
@@ -538,13 +557,27 @@
 
 msvisualcpp)
   # Important note: in order to support this mode, a compiler *must*
-  # always write the preprocessed file to stdout, regardless of -o,
-  # because we must use -o when running libtool.
+  # always write the preprocessed file to stdout.
   "$@" || exit $?
+
+  # Remove the call to Libtool.
+  if test "$libtool" = yes; then
+    while test "X$1" != 'X--mode=compile'; do
+      shift
+    done
+    shift
+  fi
+
   IFS=" "
   for arg
   do
     case "$arg" in
+    -o)
+      shift
+      ;;
+    $object)
+      shift
+      ;;
     "-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI")
 	set fnord "$@"
 	shift
@@ -557,16 +590,23 @@
 	;;
     esac
   done
-  "$@" -E |
-  sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::echo "`cygpath -u \\"\1\\"`":p' | sort | uniq > "$tmpdepfile"
+  "$@" -E 2>/dev/null |
+  sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::\1:p' | $cygpath_u | sort -u > "$tmpdepfile"
   rm -f "$depfile"
   echo "$object : \\" > "$depfile"
-  . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s::	\1 \\:p' >> "$depfile"
+  sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::	\1 \\:p' >> "$depfile"
   echo "	" >> "$depfile"
-  . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s::\1\::p' >> "$depfile"
+  sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::\1\::p' >> "$depfile"
   rm -f "$tmpdepfile"
   ;;
 
+msvcmsys)
+  # This case exists only to let depend.m4 do its work.  It works by
+  # looking at the text of this script.  This case will never be run,
+  # since it is checked for above.
+  exit 1
+  ;;
+
 none)
   exec "$@"
   ;;
@@ -585,5 +625,6 @@
 # eval: (add-hook 'write-file-hooks 'time-stamp)
 # time-stamp-start: "scriptversion="
 # time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-end: "$"
+# time-stamp-time-zone: "UTC"
+# time-stamp-end: "; # UTC"
 # End:
--- ode-0.11.orig/Makefile.in
+++ ode-0.11/Makefile.in
@@ -1,8 +1,9 @@
-# Makefile.in generated by automake 1.10.1 from Makefile.am.
+# Makefile.in generated by automake 1.11 from Makefile.am.
 # @configure_input@
 
 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
+# Inc.
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -17,8 +18,9 @@
 
 VPATH = @srcdir@
 pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
 install_sh_DATA = $(install_sh) -c -m 644
 install_sh_PROGRAM = $(install_sh) -c
@@ -47,8 +49,29 @@
 mkinstalldirs = $(install_sh) -d
 CONFIG_HEADER = $(top_builddir)/ode/src/config.h
 CONFIG_CLEAN_FILES = ode-config ode.pc
+CONFIG_CLEAN_VPATH_FILES =
+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
+am__vpath_adj = case $$p in \
+    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
+    *) f=$$p;; \
+  esac;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+  for p in $$list; do echo "$$p $$p"; done | \
+  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+    if (++n[$$2] == $(am__install_max)) \
+      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+    END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
 am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(pkgconfigdir)"
-binSCRIPT_INSTALL = $(INSTALL_SCRIPT)
 SCRIPTS = $(bin_SCRIPTS)
 SOURCES =
 DIST_SOURCES =
@@ -59,16 +82,12 @@
 	install-pdf-recursive install-ps-recursive install-recursive \
 	installcheck-recursive installdirs-recursive pdf-recursive \
 	ps-recursive uninstall-recursive
-am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
-am__vpath_adj = case $$p in \
-    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
-    *) f=$$p;; \
-  esac;
-am__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
-pkgconfigDATA_INSTALL = $(INSTALL_DATA)
 DATA = $(pkgconfig_DATA)
 RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
   distclean-recursive maintainer-clean-recursive
+AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
+	$(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
+	distdir dist dist-all distcheck
 ETAGS = etags
 CTAGS = ctags
 DIST_SUBDIRS = include drawstuff GIMPACT OPCODE ou ode tests
@@ -76,9 +95,34 @@
 distdir = $(PACKAGE)-$(VERSION)
 top_distdir = $(distdir)
 am__remove_distdir = \
-  { test ! -d $(distdir) \
-    || { find $(distdir) -type d ! -perm -200 -exec chmod u+w {} ';' \
-         && rm -fr $(distdir); }; }
+  { test ! -d "$(distdir)" \
+    || { find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
+         && rm -fr "$(distdir)"; }; }
+am__relativize = \
+  dir0=`pwd`; \
+  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
+  sed_rest='s,^[^/]*/*,,'; \
+  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
+  sed_butlast='s,/*[^/]*$$,,'; \
+  while test -n "$$dir1"; do \
+    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
+    if test "$$first" != "."; then \
+      if test "$$first" = ".."; then \
+        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
+        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
+      else \
+        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
+        if test "$$first2" = "$$first"; then \
+          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
+        else \
+          dir2="../$$dir2"; \
+        fi; \
+        dir0="$$dir0"/"$$first"; \
+      fi; \
+    fi; \
+    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
+  done; \
+  reldir="$$dir2"
 DIST_ARCHIVES = $(distdir).tar.gz
 GZIP_ENV = --best
 distuninstallcheck_listfiles = find . -type f -print
@@ -106,15 +150,14 @@
 DEPDIR = @DEPDIR@
 DLLTOOL = @DLLTOOL@
 DSYMUTIL = @DSYMUTIL@
-ECHO = @ECHO@
+DUMPBIN = @DUMPBIN@
 ECHO_C = @ECHO_C@
 ECHO_N = @ECHO_N@
 ECHO_T = @ECHO_T@
 EGREP = @EGREP@
 EXEEXT = @EXEEXT@
 EXTRA_LIBTOOL_LDFLAGS = @EXTRA_LIBTOOL_LDFLAGS@
-F77 = @F77@
-FFLAGS = @FFLAGS@
+FGREP = @FGREP@
 GL_LIBS = @GL_LIBS@
 GREP = @GREP@
 INSTALL = @INSTALL@
@@ -122,26 +165,32 @@
 INSTALL_PROGRAM = @INSTALL_PROGRAM@
 INSTALL_SCRIPT = @INSTALL_SCRIPT@
 INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LD = @LD@
 LDFLAGS = @LDFLAGS@
 LIBOBJS = @LIBOBJS@
 LIBS = @LIBS@
 LIBSTDCXX = @LIBSTDCXX@
 LIBTOOL = @LIBTOOL@
+LIPO = @LIPO@
 LN_S = @LN_S@
 LTLIBOBJS = @LTLIBOBJS@
 MAKEINFO = @MAKEINFO@
 MKDIR_P = @MKDIR_P@
+NM = @NM@
 NMEDIT = @NMEDIT@
 OBJDUMP = @OBJDUMP@
 OBJEXT = @OBJEXT@
 ODE_PRECISION = @ODE_PRECISION@
 ODE_RELEASE = @ODE_RELEASE@
 ODE_VERSION_INFO = @ODE_VERSION_INFO@
+OTOOL = @OTOOL@
+OTOOL64 = @OTOOL64@
 PACKAGE = @PACKAGE@
 PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
 PACKAGE_NAME = @PACKAGE_NAME@
 PACKAGE_STRING = @PACKAGE_STRING@
 PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
 PACKAGE_VERSION = @PACKAGE_VERSION@
 PATH_SEPARATOR = @PATH_SEPARATOR@
 RANLIB = @RANLIB@
@@ -162,7 +211,7 @@
 abs_top_srcdir = @abs_top_srcdir@
 ac_ct_CC = @ac_ct_CC@
 ac_ct_CXX = @ac_ct_CXX@
-ac_ct_F77 = @ac_ct_F77@
+ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
 ac_ct_WINDRES = @ac_ct_WINDRES@
 am__include = @am__include@
 am__leading_dot = @am__leading_dot@
@@ -194,6 +243,7 @@
 libexecdir = @libexecdir@
 localedir = @localedir@
 localstatedir = @localstatedir@
+lt_ECHO = @lt_ECHO@
 mandir = @mandir@
 mkdir_p = @mkdir_p@
 oldincludedir = @oldincludedir@
@@ -237,15 +287,15 @@
 	@for dep in $?; do \
 	  case '$(am__configure_deps)' in \
 	    *$$dep*) \
-	      echo ' cd $(srcdir) && $(AUTOMAKE) --foreign '; \
-	      cd $(srcdir) && $(AUTOMAKE) --foreign  \
+	      echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \
+	      $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \
 		&& exit 0; \
 	      exit 1;; \
 	  esac; \
 	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign  Makefile'; \
-	cd $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign  Makefile
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign Makefile
 .PRECIOUS: Makefile
 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 	@case '$?' in \
@@ -261,9 +311,10 @@
 	$(SHELL) ./config.status --recheck
 
 $(top_srcdir)/configure:  $(am__configure_deps)
-	cd $(srcdir) && $(AUTOCONF)
+	$(am__cd) $(srcdir) && $(AUTOCONF)
 $(ACLOCAL_M4):  $(am__aclocal_m4_deps)
-	cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
+	$(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
+$(am__aclocal_m4_deps):
 ode-config: $(top_builddir)/config.status $(srcdir)/ode-config.in
 	cd $(top_builddir) && $(SHELL) ./config.status $@
 ode.pc: $(top_builddir)/config.status $(srcdir)/ode.pc.in
@@ -271,22 +322,37 @@
 install-binSCRIPTS: $(bin_SCRIPTS)
 	@$(NORMAL_INSTALL)
 	test -z "$(bindir)" || $(MKDIR_P) "$(DESTDIR)$(bindir)"
-	@list='$(bin_SCRIPTS)'; for p in $$list; do \
+	@list='$(bin_SCRIPTS)'; test -n "$(bindir)" || list=; \
+	for p in $$list; do \
 	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
-	  if test -f $$d$$p; then \
-	    f=`echo "$$p" | sed 's|^.*/||;$(transform)'`; \
-	    echo " $(binSCRIPT_INSTALL) '$$d$$p' '$(DESTDIR)$(bindir)/$$f'"; \
-	    $(binSCRIPT_INSTALL) "$$d$$p" "$(DESTDIR)$(bindir)/$$f"; \
-	  else :; fi; \
-	done
+	  if test -f "$$d$$p"; then echo "$$d$$p"; echo "$$p"; else :; fi; \
+	done | \
+	sed -e 'p;s,.*/,,;n' \
+	    -e 'h;s|.*|.|' \
+	    -e 'p;x;s,.*/,,;$(transform)' | sed 'N;N;N;s,\n, ,g' | \
+	$(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1; } \
+	  { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
+	    if ($$2 == $$4) { files[d] = files[d] " " $$1; \
+	      if (++n[d] == $(am__install_max)) { \
+		print "f", d, files[d]; n[d] = 0; files[d] = "" } } \
+	    else { print "f", d "/" $$4, $$1 } } \
+	  END { for (d in files) print "f", d, files[d] }' | \
+	while read type dir files; do \
+	     if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
+	     test -z "$$files" || { \
+	       echo " $(INSTALL_SCRIPT) $$files '$(DESTDIR)$(bindir)$$dir'"; \
+	       $(INSTALL_SCRIPT) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \
+	     } \
+	; done
 
 uninstall-binSCRIPTS:
 	@$(NORMAL_UNINSTALL)
-	@list='$(bin_SCRIPTS)'; for p in $$list; do \
-	  f=`echo "$$p" | sed 's|^.*/||;$(transform)'`; \
-	  echo " rm -f '$(DESTDIR)$(bindir)/$$f'"; \
-	  rm -f "$(DESTDIR)$(bindir)/$$f"; \
-	done
+	@list='$(bin_SCRIPTS)'; test -n "$(bindir)" || exit 0; \
+	files=`for p in $$list; do echo "$$p"; done | \
+	       sed -e 's,.*/,,;$(transform)'`; \
+	test -n "$$list" || exit 0; \
+	echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \
+	cd "$(DESTDIR)$(bindir)" && rm -f $$files
 
 mostlyclean-libtool:
 	-rm -f *.lo
@@ -295,24 +361,27 @@
 	-rm -rf .libs _libs
 
 distclean-libtool:
-	-rm -f libtool
+	-rm -f libtool config.lt
 install-pkgconfigDATA: $(pkgconfig_DATA)
 	@$(NORMAL_INSTALL)
 	test -z "$(pkgconfigdir)" || $(MKDIR_P) "$(DESTDIR)$(pkgconfigdir)"
-	@list='$(pkgconfig_DATA)'; for p in $$list; do \
+	@list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \
+	for p in $$list; do \
 	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
-	  f=$(am__strip_dir) \
-	  echo " $(pkgconfigDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(pkgconfigdir)/$$f'"; \
-	  $(pkgconfigDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(pkgconfigdir)/$$f"; \
+	  echo "$$d$$p"; \
+	done | $(am__base_list) | \
+	while read files; do \
+	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pkgconfigdir)'"; \
+	  $(INSTALL_DATA) $$files "$(DESTDIR)$(pkgconfigdir)" || exit $$?; \
 	done
 
 uninstall-pkgconfigDATA:
 	@$(NORMAL_UNINSTALL)
-	@list='$(pkgconfig_DATA)'; for p in $$list; do \
-	  f=$(am__strip_dir) \
-	  echo " rm -f '$(DESTDIR)$(pkgconfigdir)/$$f'"; \
-	  rm -f "$(DESTDIR)$(pkgconfigdir)/$$f"; \
-	done
+	@list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \
+	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
+	test -n "$$files" || exit 0; \
+	echo " ( cd '$(DESTDIR)$(pkgconfigdir)' && rm -f" $$files ")"; \
+	cd "$(DESTDIR)$(pkgconfigdir)" && rm -f $$files
 
 # This directory's subdirectories are mostly independent; you can cd
 # into them and run `make' without going through this Makefile.
@@ -338,7 +407,7 @@
 	  else \
 	    local_target="$$target"; \
 	  fi; \
-	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
 	  || eval $$failcom; \
 	done; \
 	if test "$$dot_seen" = "no"; then \
@@ -372,16 +441,16 @@
 	  else \
 	    local_target="$$target"; \
 	  fi; \
-	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
 	  || eval $$failcom; \
 	done && test -z "$$fail"
 tags-recursive:
 	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
+	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
 	done
 ctags-recursive:
 	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
+	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
 	done
 
 ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
@@ -389,14 +458,14 @@
 	unique=`for i in $$list; do \
 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 	  done | \
-	  $(AWK) '{ files[$$0] = 1; nonemtpy = 1; } \
+	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
 	mkid -fID $$unique
 tags: TAGS
 
 TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
+	set x; \
 	here=`pwd`; \
 	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
 	  include_option=--etags-include; \
@@ -408,7 +477,7 @@
 	list='$(SUBDIRS)'; for subdir in $$list; do \
 	  if test "$$subdir" = .; then :; else \
 	    test ! -f $$subdir/TAGS || \
-	      tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
+	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
 	  fi; \
 	done; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
@@ -417,36 +486,41 @@
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
 	  test -n "$$unique" || unique=$$empty_fix; \
-	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	    $$tags $$unique; \
+	  if test $$# -gt 0; then \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
 	fi
 ctags: CTAGS
 CTAGS: ctags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	test -z "$(CTAGS_ARGS)$$tags$$unique" \
+	test -z "$(CTAGS_ARGS)$$unique" \
 	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
-	     $$tags $$unique
+	     $$unique
 
 GTAGS:
 	here=`$(am__cd) $(top_builddir) && pwd` \
-	  && cd $(top_srcdir) \
-	  && gtags -i $(GTAGS_ARGS) $$here
+	  && $(am__cd) $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) "$$here"
 
 distclean-tags:
 	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
 
 distdir: $(DISTFILES)
 	$(am__remove_distdir)
-	test -d $(distdir) || mkdir $(distdir)
+	test -d "$(distdir)" || mkdir "$(distdir)"
 	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
 	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
 	list='$(DISTFILES)'; \
@@ -462,38 +536,54 @@
 	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
 	  if test -d $$d/$$file; then \
 	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
 	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 	    fi; \
-	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
 	  else \
-	    test -f $(distdir)/$$file \
-	    || cp -p $$d/$$file $(distdir)/$$file \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
 	    || exit 1; \
 	  fi; \
 	done
-	list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
 	  if test "$$subdir" = .; then :; else \
 	    test -d "$(distdir)/$$subdir" \
 	    || $(MKDIR_P) "$(distdir)/$$subdir" \
 	    || exit 1; \
-	    distdir=`$(am__cd) $(distdir) && pwd`; \
-	    top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
-	    (cd $$subdir && \
+	  fi; \
+	done
+	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+	  if test "$$subdir" = .; then :; else \
+	    dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
+	    $(am__relativize); \
+	    new_distdir=$$reldir; \
+	    dir1=$$subdir; dir2="$(top_distdir)"; \
+	    $(am__relativize); \
+	    new_top_distdir=$$reldir; \
+	    echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
+	    echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
+	    ($(am__cd) $$subdir && \
 	      $(MAKE) $(AM_MAKEFLAGS) \
-	        top_distdir="$$top_distdir" \
-	        distdir="$$distdir/$$subdir" \
+	        top_distdir="$$new_top_distdir" \
+	        distdir="$$new_distdir" \
 		am__remove_distdir=: \
 		am__skip_length_check=: \
+		am__skip_mode_fix=: \
 	        distdir) \
 	      || exit 1; \
 	  fi; \
 	done
-	-find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \
+	-test -n "$(am__skip_mode_fix)" \
+	|| find "$(distdir)" -type d ! -perm -777 -exec chmod a+rwx {} \; -o \
 	  ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
 	  ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
 	  ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
-	|| chmod -R a+r $(distdir)
+	|| chmod -R a+r "$(distdir)"
 dist-gzip: distdir
 	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
 	$(am__remove_distdir)
@@ -506,6 +596,10 @@
 	tardir=$(distdir) && $(am__tar) | lzma -9 -c >$(distdir).tar.lzma
 	$(am__remove_distdir)
 
+dist-xz: distdir
+	tardir=$(distdir) && $(am__tar) | xz -c >$(distdir).tar.xz
+	$(am__remove_distdir)
+
 dist-tarZ: distdir
 	tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
 	$(am__remove_distdir)
@@ -534,6 +628,8 @@
 	  bunzip2 -c $(distdir).tar.bz2 | $(am__untar) ;;\
 	*.tar.lzma*) \
 	  unlzma -c $(distdir).tar.lzma | $(am__untar) ;;\
+	*.tar.xz*) \
+	  xz -dc $(distdir).tar.xz | $(am__untar) ;;\
 	*.tar.Z*) \
 	  uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
 	*.shar.gz*) \
@@ -545,9 +641,11 @@
 	mkdir $(distdir)/_build
 	mkdir $(distdir)/_inst
 	chmod a-w $(distdir)
+	test -d $(distdir)/_build || exit 0; \
 	dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
 	  && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
-	  && cd $(distdir)/_build \
+	  && am__cwd=`pwd` \
+	  && $(am__cd) $(distdir)/_build \
 	  && ../configure --srcdir=.. --prefix="$$dc_install_base" \
 	    $(DISTCHECK_CONFIGURE_FLAGS) \
 	  && $(MAKE) $(AM_MAKEFLAGS) \
@@ -569,13 +667,15 @@
 	  && rm -rf "$$dc_destdir" \
 	  && $(MAKE) $(AM_MAKEFLAGS) dist \
 	  && rm -rf $(DIST_ARCHIVES) \
-	  && $(MAKE) $(AM_MAKEFLAGS) distcleancheck
+	  && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
+	  && cd "$$am__cwd" \
+	  || exit 1
 	$(am__remove_distdir)
 	@(echo "$(distdir) archives ready for distribution: "; \
 	  list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
 	  sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
 distuninstallcheck:
-	@cd $(distuninstallcheck_dir) \
+	@$(am__cd) '$(distuninstallcheck_dir)' \
 	&& test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \
 	   || { echo "ERROR: files left after uninstall:" ; \
 	        if test -n "$(DESTDIR)"; then \
@@ -620,6 +720,7 @@
 
 distclean-generic:
 	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
 
 maintainer-clean-generic:
 	@echo "This command is intended for maintainers to use"
@@ -640,6 +741,8 @@
 
 html: html-recursive
 
+html-am:
+
 info: info-recursive
 
 info-am:
@@ -648,18 +751,28 @@
 
 install-dvi: install-dvi-recursive
 
+install-dvi-am:
+
 install-exec-am: install-binSCRIPTS
 
 install-html: install-html-recursive
 
+install-html-am:
+
 install-info: install-info-recursive
 
+install-info-am:
+
 install-man:
 
 install-pdf: install-pdf-recursive
 
+install-pdf-am:
+
 install-ps: install-ps-recursive
 
+install-ps-am:
+
 installcheck-am:
 
 maintainer-clean: maintainer-clean-recursive
@@ -682,30 +795,32 @@
 
 uninstall-am: uninstall-binSCRIPTS uninstall-pkgconfigDATA
 
-.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) install-am \
-	install-strip
+.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) ctags-recursive \
+	install-am install-strip tags-recursive
 
 .PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
 	all all-am am--refresh check check-am clean clean-generic \
 	clean-libtool ctags ctags-recursive dist dist-all dist-bzip2 \
-	dist-gzip dist-lzma dist-shar dist-tarZ dist-zip distcheck \
-	distclean distclean-generic distclean-libtool distclean-tags \
-	distcleancheck distdir distuninstallcheck dvi dvi-am html \
-	html-am info info-am install install-am install-binSCRIPTS \
-	install-data install-data-am install-dvi install-dvi-am \
-	install-exec install-exec-am install-html install-html-am \
-	install-info install-info-am install-man install-pdf \
-	install-pdf-am install-pkgconfigDATA install-ps install-ps-am \
-	install-strip installcheck installcheck-am installdirs \
-	installdirs-am maintainer-clean maintainer-clean-generic \
-	mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \
-	ps ps-am tags tags-recursive uninstall uninstall-am \
-	uninstall-binSCRIPTS uninstall-pkgconfigDATA
+	dist-gzip dist-lzma dist-shar dist-tarZ dist-xz dist-zip \
+	distcheck distclean distclean-generic distclean-libtool \
+	distclean-tags distcleancheck distdir distuninstallcheck dvi \
+	dvi-am html html-am info info-am install install-am \
+	install-binSCRIPTS install-data install-data-am install-dvi \
+	install-dvi-am install-exec install-exec-am install-html \
+	install-html-am install-info install-info-am install-man \
+	install-pdf install-pdf-am install-pkgconfigDATA install-ps \
+	install-ps-am install-strip installcheck installcheck-am \
+	installdirs installdirs-am maintainer-clean \
+	maintainer-clean-generic mostlyclean mostlyclean-generic \
+	mostlyclean-libtool pdf pdf-am ps ps-am tags tags-recursive \
+	uninstall uninstall-am uninstall-binSCRIPTS \
+	uninstall-pkgconfigDATA
 
 
 # Utility rule for making a release
 release: dist-gzip dist-bzip2
 	@echo Created release packages for ${PACKAGE}-${VERSION}.
+
 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 # Otherwise a system limit (for SysV at least) may be exceeded.
 .NOEXPORT:
--- ode-0.11.orig/config.guess
+++ ode-0.11/config.guess
@@ -4,7 +4,7 @@
 #   2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008
 #   Free Software Foundation, Inc.
 
-timestamp='2008-01-23'
+timestamp='2009-04-27'
 
 # This file is free software; you can redistribute it and/or modify it
 # under the terms of the GNU General Public License as published by
@@ -324,6 +324,9 @@
 	case `/usr/bin/uname -p` in
 	    sparc) echo sparc-icl-nx7; exit ;;
 	esac ;;
+    s390x:SunOS:*:*)
+	echo ${UNAME_MACHINE}-ibm-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+	exit ;;
     sun4H:SunOS:5.*:*)
 	echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
 	exit ;;
@@ -331,7 +334,20 @@
 	echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
 	exit ;;
     i86pc:SunOS:5.*:* | i86xen:SunOS:5.*:*)
-	echo i386-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+	eval $set_cc_for_build
+	SUN_ARCH="i386"
+	# If there is a compiler, see if it is configured for 64-bit objects.
+	# Note that the Sun cc does not turn __LP64__ into 1 like gcc does.
+	# This test works for both compilers.
+	if [ "$CC_FOR_BUILD" != 'no_compiler_found' ]; then
+	    if (echo '#ifdef __amd64'; echo IS_64BIT_ARCH; echo '#endif') | \
+		(CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | \
+		grep IS_64BIT_ARCH >/dev/null
+	    then
+		SUN_ARCH="x86_64"
+	    fi
+	fi
+	echo ${SUN_ARCH}-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
 	exit ;;
     sun4*:SunOS:6*:*)
 	# According to config.sub, this is the proper way to canonicalize
@@ -796,7 +812,7 @@
 	    x86)
 		echo i586-pc-interix${UNAME_RELEASE}
 		exit ;;
-	    EM64T | authenticamd)
+	    EM64T | authenticamd | genuineintel)
 		echo x86_64-unknown-interix${UNAME_RELEASE}
 		exit ;;
 	    IA64)
@@ -935,6 +951,9 @@
 	if test "$?" = 0 ; then LIBC="libc1" ; else LIBC="" ; fi
 	echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC}
 	exit ;;
+    padre:Linux:*:*)
+	echo sparc-unknown-linux-gnu
+	exit ;;
     parisc:Linux:*:* | hppa:Linux:*:*)
 	# Look for CPU level
 	case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in
@@ -985,9 +1004,6 @@
 	  a.out-i386-linux)
 		echo "${UNAME_MACHINE}-pc-linux-gnuaout"
 		exit ;;
-	  coff-i386)
-		echo "${UNAME_MACHINE}-pc-linux-gnucoff"
-		exit ;;
 	  "")
 		# Either a pre-BFD a.out linker (linux-gnuoldld) or
 		# one that does not give us useful --help.
@@ -1102,8 +1118,11 @@
     pc:*:*:*)
 	# Left here for compatibility:
         # uname -m prints for DJGPP always 'pc', but it prints nothing about
-        # the processor, so we play safe by assuming i386.
-	echo i386-pc-msdosdjgpp
+        # the processor, so we play safe by assuming i586.
+	# Note: whatever this is, it MUST be the same as what config.sub
+	# prints for the "djgpp" host, or else GDB configury will decide that
+	# this is a cross-build.
+	echo i586-pc-msdosdjgpp
         exit ;;
     Intel:Mach:3*:*)
 	echo i386-pc-mach3
@@ -1141,6 +1160,16 @@
     3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*)
         /bin/uname -p 2>/dev/null | grep 86 >/dev/null \
           && { echo i486-ncr-sysv4; exit; } ;;
+    NCR*:*:4.2:* | MPRAS*:*:4.2:*)
+	OS_REL='.3'
+	test -r /etc/.relid \
+	    && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid`
+	/bin/uname -p 2>/dev/null | grep 86 >/dev/null \
+	    && { echo i486-ncr-sysv4.3${OS_REL}; exit; }
+	/bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \
+	    && { echo i586-ncr-sysv4.3${OS_REL}; exit; }
+	/bin/uname -p 2>/dev/null | /bin/grep pteron >/dev/null \
+	    && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;;
     m68*:LynxOS:2.*:* | m68*:LynxOS:3.0*:*)
 	echo m68k-unknown-lynxos${UNAME_RELEASE}
 	exit ;;
@@ -1216,6 +1245,9 @@
     BePC:BeOS:*:*)	# BeOS running on Intel PC compatible.
 	echo i586-pc-beos
 	exit ;;
+    BePC:Haiku:*:*)	# Haiku running on Intel PC compatible.
+	echo i586-pc-haiku
+	exit ;;
     SX-4:SUPER-UX:*:*)
 	echo sx4-nec-superux${UNAME_RELEASE}
 	exit ;;
@@ -1324,6 +1356,9 @@
     i*86:rdos:*:*)
 	echo ${UNAME_MACHINE}-pc-rdos
 	exit ;;
+    i*86:AROS:*:*)
+	echo ${UNAME_MACHINE}-pc-aros
+	exit ;;
 esac
 
 #echo '(No uname command or uname output not recognized.)' 1>&2
--- ode-0.11.orig/config.sub
+++ ode-0.11/config.sub
@@ -4,7 +4,7 @@
 #   2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008
 #   Free Software Foundation, Inc.
 
-timestamp='2008-01-16'
+timestamp='2009-04-17'
 
 # This file is (in principle) common to ALL GNU software.
 # The presence of a machine in this file suggests that SOME GNU software
@@ -122,6 +122,7 @@
 case $maybe_os in
   nto-qnx* | linux-gnu* | linux-dietlibc | linux-newlib* | linux-uclibc* | \
   uclinux-uclibc* | uclinux-gnu* | kfreebsd*-gnu* | knetbsd*-gnu* | netbsd*-gnu* | \
+  kopensolaris*-gnu* | \
   storm-chaos* | os2-emx* | rtmk-nova*)
     os=-$maybe_os
     basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`
@@ -249,13 +250,16 @@
 	| h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \
 	| i370 | i860 | i960 | ia64 \
 	| ip2k | iq2000 \
+	| lm32 \
 	| m32c | m32r | m32rle | m68000 | m68k | m88k \
-	| maxq | mb | microblaze | mcore | mep \
+	| maxq | mb | microblaze | mcore | mep | metag \
 	| mips | mipsbe | mipseb | mipsel | mipsle \
 	| mips16 \
 	| mips64 | mips64el \
-	| mips64vr | mips64vrel \
+	| mips64octeon | mips64octeonel \
 	| mips64orion | mips64orionel \
+	| mips64r5900 | mips64r5900el \
+	| mips64vr | mips64vrel \
 	| mips64vr4100 | mips64vr4100el \
 	| mips64vr4300 | mips64vr4300el \
 	| mips64vr5000 | mips64vr5000el \
@@ -268,6 +272,7 @@
 	| mipsisa64sr71k | mipsisa64sr71kel \
 	| mipstx39 | mipstx39el \
 	| mn10200 | mn10300 \
+	| moxie \
 	| mt \
 	| msp430 \
 	| nios | nios2 \
@@ -277,7 +282,7 @@
 	| powerpc | powerpc64 | powerpc64le | powerpcle | ppcbe \
 	| pyramid \
 	| score \
-	| sh | sh[1234] | sh[24]a | sh[23]e | sh[34]eb | sheb | shbe | shle | sh[1234]le | sh3ele \
+	| sh | sh[1234] | sh[24]a | sh[24]aeb | sh[23]e | sh[34]eb | sheb | shbe | shle | sh[1234]le | sh3ele \
 	| sh64 | sh64le \
 	| sparc | sparc64 | sparc64b | sparc64v | sparc86x | sparclet | sparclite \
 	| sparcv8 | sparcv9 | sparcv9b | sparcv9v \
@@ -286,7 +291,7 @@
 	| v850 | v850e \
 	| we32k \
 	| x86 | xc16x | xscale | xscalee[bl] | xstormy16 | xtensa \
-	| z8k)
+	| z8k | z80)
 		basic_machine=$basic_machine-unknown
 		;;
 	m6811 | m68hc11 | m6812 | m68hc12)
@@ -329,14 +334,17 @@
 	| hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \
 	| i*86-* | i860-* | i960-* | ia64-* \
 	| ip2k-* | iq2000-* \
+	| lm32-* \
 	| m32c-* | m32r-* | m32rle-* \
 	| m68000-* | m680[012346]0-* | m68360-* | m683?2-* | m68k-* \
-	| m88110-* | m88k-* | maxq-* | mcore-* \
+	| m88110-* | m88k-* | maxq-* | mcore-* | metag-* \
 	| mips-* | mipsbe-* | mipseb-* | mipsel-* | mipsle-* \
 	| mips16-* \
 	| mips64-* | mips64el-* \
-	| mips64vr-* | mips64vrel-* \
+	| mips64octeon-* | mips64octeonel-* \
 	| mips64orion-* | mips64orionel-* \
+	| mips64r5900-* | mips64r5900el-* \
+	| mips64vr-* | mips64vrel-* \
 	| mips64vr4100-* | mips64vr4100el-* \
 	| mips64vr4300-* | mips64vr4300el-* \
 	| mips64vr5000-* | mips64vr5000el-* \
@@ -358,20 +366,20 @@
 	| powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* | ppcbe-* \
 	| pyramid-* \
 	| romp-* | rs6000-* \
-	| sh-* | sh[1234]-* | sh[24]a-* | sh[23]e-* | sh[34]eb-* | sheb-* | shbe-* \
+	| sh-* | sh[1234]-* | sh[24]a-* | sh[24]aeb-* | sh[23]e-* | sh[34]eb-* | sheb-* | shbe-* \
 	| shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \
 	| sparc-* | sparc64-* | sparc64b-* | sparc64v-* | sparc86x-* | sparclet-* \
 	| sparclite-* \
 	| sparcv8-* | sparcv9-* | sparcv9b-* | sparcv9v-* | strongarm-* | sv1-* | sx?-* \
 	| tahoe-* | thumb-* \
-	| tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* \
+	| tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* | tile-* \
 	| tron-* \
 	| v850-* | v850e-* | vax-* \
 	| we32k-* \
 	| x86-* | x86_64-* | xc16x-* | xps100-* | xscale-* | xscalee[bl]-* \
 	| xstormy16-* | xtensa*-* \
 	| ymp-* \
-	| z8k-*)
+	| z8k-* | z80-*)
 		;;
 	# Recognize the basic CPU types without company name, with glob match.
 	xtensa*)
@@ -439,6 +447,10 @@
 		basic_machine=m68k-apollo
 		os=-bsd
 		;;
+	aros)
+		basic_machine=i386-pc
+		os=-aros
+		;;
 	aux)
 		basic_machine=m68k-apple
 		os=-aux
@@ -459,6 +471,10 @@
 		basic_machine=c90-cray
 		os=-unicos
 		;;
+        cegcc)
+		basic_machine=arm-unknown
+		os=-cegcc
+		;;
 	convex-c1)
 		basic_machine=c1-convex
 		os=-bsd
@@ -526,6 +542,10 @@
 		basic_machine=m88k-motorola
 		os=-sysv3
 		;;
+	dicos)
+		basic_machine=i686-pc
+		os=-dicos
+		;;
 	djgpp)
 		basic_machine=i586-pc
 		os=-msdosdjgpp
@@ -1128,6 +1148,10 @@
 		basic_machine=z8k-unknown
 		os=-sim
 		;;
+	z80-*-coff)
+		basic_machine=z80-unknown
+		os=-sim
+		;;
 	none)
 		basic_machine=none-none
 		os=-none
@@ -1166,7 +1190,7 @@
 	we32k)
 		basic_machine=we32k-att
 		;;
-	sh[1234] | sh[24]a | sh[34]eb | sh[1234]le | sh[23]ele)
+	sh[1234] | sh[24]a | sh[24]aeb | sh[34]eb | sh[1234]le | sh[23]ele)
 		basic_machine=sh-unknown
 		;;
 	sparc | sparcv8 | sparcv9 | sparcv9b | sparcv9v)
@@ -1238,8 +1262,9 @@
 	-gnu* | -bsd* | -mach* | -minix* | -genix* | -ultrix* | -irix* \
 	      | -*vms* | -sco* | -esix* | -isc* | -aix* | -sunos | -sunos[34]*\
 	      | -hpux* | -unos* | -osf* | -luna* | -dgux* | -solaris* | -sym* \
+	      | -kopensolaris* \
 	      | -amigaos* | -amigados* | -msdos* | -newsos* | -unicos* | -aof* \
-	      | -aos* \
+	      | -aos* | -aros* \
 	      | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \
 	      | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \
 	      | -hiux* | -386bsd* | -knetbsd* | -mirbsd* | -netbsd* \
@@ -1248,7 +1273,7 @@
 	      | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \
 	      | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \
 	      | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \
-	      | -chorusos* | -chorusrdb* \
+	      | -chorusos* | -chorusrdb* | -cegcc* \
 	      | -cygwin* | -pe* | -psos* | -moss* | -proelf* | -rtems* \
 	      | -mingw32* | -linux-gnu* | -linux-newlib* | -linux-uclibc* \
 	      | -uxpv* | -beos* | -mpeix* | -udk* \
@@ -1388,6 +1413,9 @@
 	-zvmoe)
 		os=-zvmoe
 		;;
+	-dicos*)
+		os=-dicos
+		;;
 	-none)
 		;;
 	*)
--- ode-0.11.orig/aclocal.m4
+++ ode-0.11/aclocal.m4
@@ -1,7 +1,7 @@
-# generated automatically by aclocal 1.10.1 -*- Autoconf -*-
+# generated automatically by aclocal 1.11 -*- Autoconf -*-
 
 # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
-# 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
+# 2005, 2006, 2007, 2008, 2009  Free Software Foundation, Inc.
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -13,108 +13,194 @@
 
 m4_ifndef([AC_AUTOCONF_VERSION],
   [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
-m4_if(AC_AUTOCONF_VERSION, [2.63],,
-[m4_warning([this file was generated for autoconf 2.63.
+m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.64],,
+[m4_warning([this file was generated for autoconf 2.64.
 You have another version of autoconf.  It may work, but is not guaranteed to.
 If you have problems, you may need to regenerate the build system entirely.
 To do so, use the procedure documented by the package, typically `autoreconf'.])])
 
 # libtool.m4 - Configure libtool for the host system. -*-Autoconf-*-
+#
+#   Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,
+#                 2006, 2007, 2008 Free Software Foundation, Inc.
+#   Written by Gordon Matzigkeit, 1996
+#
+# This file is free software; the Free Software Foundation gives
+# unlimited permission to copy and/or distribute it, with or without
+# modifications, as long as this notice is preserved.
+
+m4_define([_LT_COPYING], [dnl
+#   Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,
+#                 2006, 2007, 2008 Free Software Foundation, Inc.
+#   Written by Gordon Matzigkeit, 1996
+#
+#   This file is part of GNU Libtool.
+#
+# GNU Libtool is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# As a special exception to the GNU General Public License,
+# if you distribute this file as part of a program or library that
+# is built using GNU Libtool, you may include this file under the
+# same distribution terms that you use for the rest of that program.
+#
+# GNU Libtool is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING.  If not, a copy
+# can be downloaded from http://www.gnu.org/licenses/gpl.html, or
+# obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+])
 
-# serial 52 AC_PROG_LIBTOOL
+# serial 56 LT_INIT
 
 
-# AC_PROVIDE_IFELSE(MACRO-NAME, IF-PROVIDED, IF-NOT-PROVIDED)
-# -----------------------------------------------------------
-# If this macro is not defined by Autoconf, define it here.
-m4_ifdef([AC_PROVIDE_IFELSE],
-         [],
-         [m4_define([AC_PROVIDE_IFELSE],
-	         [m4_ifdef([AC_PROVIDE_$1],
-		           [$2], [$3])])])
+# LT_PREREQ(VERSION)
+# ------------------
+# Complain and exit if this libtool version is less that VERSION.
+m4_defun([LT_PREREQ],
+[m4_if(m4_version_compare(m4_defn([LT_PACKAGE_VERSION]), [$1]), -1,
+       [m4_default([$3],
+		   [m4_fatal([Libtool version $1 or higher is required],
+		             63)])],
+       [$2])])
 
 
-# AC_PROG_LIBTOOL
-# ---------------
-AC_DEFUN([AC_PROG_LIBTOOL],
-[AC_REQUIRE([_AC_PROG_LIBTOOL])dnl
-dnl If AC_PROG_CXX has already been expanded, run AC_LIBTOOL_CXX
-dnl immediately, otherwise, hook it in at the end of AC_PROG_CXX.
-  AC_PROVIDE_IFELSE([AC_PROG_CXX],
-    [AC_LIBTOOL_CXX],
-    [define([AC_PROG_CXX], defn([AC_PROG_CXX])[AC_LIBTOOL_CXX
-  ])])
-dnl And a similar setup for Fortran 77 support
-  AC_PROVIDE_IFELSE([AC_PROG_F77],
-    [AC_LIBTOOL_F77],
-    [define([AC_PROG_F77], defn([AC_PROG_F77])[AC_LIBTOOL_F77
-])])
-
-dnl Quote A][M_PROG_GCJ so that aclocal doesn't bring it in needlessly.
-dnl If either AC_PROG_GCJ or A][M_PROG_GCJ have already been expanded, run
-dnl AC_LIBTOOL_GCJ immediately, otherwise, hook it in at the end of both.
-  AC_PROVIDE_IFELSE([AC_PROG_GCJ],
-    [AC_LIBTOOL_GCJ],
-    [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],
-      [AC_LIBTOOL_GCJ],
-      [AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ],
-	[AC_LIBTOOL_GCJ],
-      [ifdef([AC_PROG_GCJ],
-	     [define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[AC_LIBTOOL_GCJ])])
-       ifdef([A][M_PROG_GCJ],
-	     [define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[AC_LIBTOOL_GCJ])])
-       ifdef([LT_AC_PROG_GCJ],
-	     [define([LT_AC_PROG_GCJ],
-		defn([LT_AC_PROG_GCJ])[AC_LIBTOOL_GCJ])])])])
-])])# AC_PROG_LIBTOOL
+# _LT_CHECK_BUILDDIR
+# ------------------
+# Complain if the absolute build directory name contains unusual characters
+m4_defun([_LT_CHECK_BUILDDIR],
+[case `pwd` in
+  *\ * | *\	*)
+    AC_MSG_WARN([Libtool does not cope well with whitespace in `pwd`]) ;;
+esac
+])
 
 
-# _AC_PROG_LIBTOOL
-# ----------------
-AC_DEFUN([_AC_PROG_LIBTOOL],
-[AC_REQUIRE([AC_LIBTOOL_SETUP])dnl
-AC_BEFORE([$0],[AC_LIBTOOL_CXX])dnl
-AC_BEFORE([$0],[AC_LIBTOOL_F77])dnl
-AC_BEFORE([$0],[AC_LIBTOOL_GCJ])dnl
+# LT_INIT([OPTIONS])
+# ------------------
+AC_DEFUN([LT_INIT],
+[AC_PREREQ([2.58])dnl We use AC_INCLUDES_DEFAULT
+AC_BEFORE([$0], [LT_LANG])dnl
+AC_BEFORE([$0], [LT_OUTPUT])dnl
+AC_BEFORE([$0], [LTDL_INIT])dnl
+m4_require([_LT_CHECK_BUILDDIR])dnl
+
+dnl Autoconf doesn't catch unexpanded LT_ macros by default:
+m4_pattern_forbid([^_?LT_[A-Z_]+$])dnl
+m4_pattern_allow([^(_LT_EOF|LT_DLGLOBAL|LT_DLLAZY_OR_NOW|LT_MULTI_MODULE)$])dnl
+dnl aclocal doesn't pull ltoptions.m4, ltsugar.m4, or ltversion.m4
+dnl unless we require an AC_DEFUNed macro:
+AC_REQUIRE([LTOPTIONS_VERSION])dnl
+AC_REQUIRE([LTSUGAR_VERSION])dnl
+AC_REQUIRE([LTVERSION_VERSION])dnl
+AC_REQUIRE([LTOBSOLETE_VERSION])dnl
+m4_require([_LT_PROG_LTMAIN])dnl
+
+dnl Parse OPTIONS
+_LT_SET_OPTIONS([$0], [$1])
 
 # This can be used to rebuild libtool when needed
-LIBTOOL_DEPS="$ac_aux_dir/ltmain.sh"
+LIBTOOL_DEPS="$ltmain"
 
 # Always use our own libtool.
 LIBTOOL='$(SHELL) $(top_builddir)/libtool'
 AC_SUBST(LIBTOOL)dnl
 
-# Prevent multiple expansion
-define([AC_PROG_LIBTOOL], [])
-])# _AC_PROG_LIBTOOL
+_LT_SETUP
 
+# Only expand once:
+m4_define([LT_INIT])
+])# LT_INIT
+
+# Old names:
+AU_ALIAS([AC_PROG_LIBTOOL], [LT_INIT])
+AU_ALIAS([AM_PROG_LIBTOOL], [LT_INIT])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_PROG_LIBTOOL], [])
+dnl AC_DEFUN([AM_PROG_LIBTOOL], [])
 
-# AC_LIBTOOL_SETUP
-# ----------------
-AC_DEFUN([AC_LIBTOOL_SETUP],
-[AC_PREREQ(2.50)dnl
-AC_REQUIRE([AC_ENABLE_SHARED])dnl
-AC_REQUIRE([AC_ENABLE_STATIC])dnl
-AC_REQUIRE([AC_ENABLE_FAST_INSTALL])dnl
-AC_REQUIRE([AC_CANONICAL_HOST])dnl
+
+# _LT_CC_BASENAME(CC)
+# -------------------
+# Calculate cc_basename.  Skip known compiler wrappers and cross-prefix.
+m4_defun([_LT_CC_BASENAME],
+[for cc_temp in $1""; do
+  case $cc_temp in
+    compile | *[[\\/]]compile | ccache | *[[\\/]]ccache ) ;;
+    distcc | *[[\\/]]distcc | purify | *[[\\/]]purify ) ;;
+    \-*) ;;
+    *) break;;
+  esac
+done
+cc_basename=`$ECHO "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
+])
+
+
+# _LT_FILEUTILS_DEFAULTS
+# ----------------------
+# It is okay to use these file commands and assume they have been set
+# sensibly after `m4_require([_LT_FILEUTILS_DEFAULTS])'.
+m4_defun([_LT_FILEUTILS_DEFAULTS],
+[: ${CP="cp -f"}
+: ${MV="mv -f"}
+: ${RM="rm -f"}
+])# _LT_FILEUTILS_DEFAULTS
+
+
+# _LT_SETUP
+# ---------
+m4_defun([_LT_SETUP],
+[AC_REQUIRE([AC_CANONICAL_HOST])dnl
 AC_REQUIRE([AC_CANONICAL_BUILD])dnl
+_LT_DECL([], [host_alias], [0], [The host system])dnl
+_LT_DECL([], [host], [0])dnl
+_LT_DECL([], [host_os], [0])dnl
+dnl
+_LT_DECL([], [build_alias], [0], [The build system])dnl
+_LT_DECL([], [build], [0])dnl
+_LT_DECL([], [build_os], [0])dnl
+dnl
 AC_REQUIRE([AC_PROG_CC])dnl
-AC_REQUIRE([AC_PROG_LD])dnl
-AC_REQUIRE([AC_PROG_LD_RELOAD_FLAG])dnl
-AC_REQUIRE([AC_PROG_NM])dnl
-
+AC_REQUIRE([LT_PATH_LD])dnl
+AC_REQUIRE([LT_PATH_NM])dnl
+dnl
 AC_REQUIRE([AC_PROG_LN_S])dnl
-AC_REQUIRE([AC_DEPLIBS_CHECK_METHOD])dnl
-# Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers!
-AC_REQUIRE([AC_OBJEXT])dnl
-AC_REQUIRE([AC_EXEEXT])dnl
+test -z "$LN_S" && LN_S="ln -s"
+_LT_DECL([], [LN_S], [1], [Whether we need soft or hard links])dnl
 dnl
-AC_LIBTOOL_SYS_MAX_CMD_LEN
-AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE
-AC_LIBTOOL_OBJDIR
+AC_REQUIRE([LT_CMD_MAX_LEN])dnl
+_LT_DECL([objext], [ac_objext], [0], [Object file suffix (normally "o")])dnl
+_LT_DECL([], [exeext], [0], [Executable file suffix (normally "")])dnl
+dnl
+m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+m4_require([_LT_CHECK_SHELL_FEATURES])dnl
+m4_require([_LT_CMD_RELOAD])dnl
+m4_require([_LT_CHECK_MAGIC_METHOD])dnl
+m4_require([_LT_CMD_OLD_ARCHIVE])dnl
+m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl
+
+_LT_CONFIG_LIBTOOL_INIT([
+# See if we are running on zsh, and set the options which allow our
+# commands through without removal of \ escapes INIT.
+if test -n "\${ZSH_VERSION+set}" ; then
+   setopt NO_GLOB_SUBST
+fi
+])
+if test -n "${ZSH_VERSION+set}" ; then
+   setopt NO_GLOB_SUBST
+fi
 
-AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl
-_LT_AC_PROG_ECHO_BACKSLASH
+_LT_CHECK_OBJDIR
+
+m4_require([_LT_TAG_COMPILER])dnl
+_LT_PROG_ECHO_BACKSLASH
 
 case $host_os in
 aix3*)
@@ -130,116 +216,653 @@
 
 # Sed substitution that helps us do robust quoting.  It backslashifies
 # metacharacters that are still active within double-quoted strings.
-Xsed='sed -e 1s/^X//'
-[sed_quote_subst='s/\([\\"\\`$\\\\]\)/\\\1/g']
+sed_quote_subst='s/\([["`$\\]]\)/\\\1/g'
 
 # Same as above, but do not quote variable references.
-[double_quote_subst='s/\([\\"\\`\\\\]\)/\\\1/g']
+double_quote_subst='s/\([["`\\]]\)/\\\1/g'
 
 # Sed substitution to delay expansion of an escaped shell variable in a
 # double_quote_subst'ed string.
 delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
 
+# Sed substitution to delay expansion of an escaped single quote.
+delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g'
+
 # Sed substitution to avoid accidental globbing in evaled expressions
 no_glob_subst='s/\*/\\\*/g'
 
-# Constants:
-rm="rm -f"
-
 # Global variables:
-default_ofile=libtool
+ofile=libtool
 can_build_shared=yes
 
 # All known linkers require a `.a' archive for static linking (except MSVC,
 # which needs '.lib').
 libext=a
-ltmain="$ac_aux_dir/ltmain.sh"
-ofile="$default_ofile"
-with_gnu_ld="$lt_cv_prog_gnu_ld"
 
-AC_CHECK_TOOL(AR, ar, false)
-AC_CHECK_TOOL(RANLIB, ranlib, :)
-AC_CHECK_TOOL(STRIP, strip, :)
+with_gnu_ld="$lt_cv_prog_gnu_ld"
 
 old_CC="$CC"
 old_CFLAGS="$CFLAGS"
 
 # Set sane defaults for various variables
-test -z "$AR" && AR=ar
-test -z "$AR_FLAGS" && AR_FLAGS=cru
-test -z "$AS" && AS=as
 test -z "$CC" && CC=cc
 test -z "$LTCC" && LTCC=$CC
 test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS
-test -z "$DLLTOOL" && DLLTOOL=dlltool
 test -z "$LD" && LD=ld
-test -z "$LN_S" && LN_S="ln -s"
-test -z "$MAGIC_CMD" && MAGIC_CMD=file
-test -z "$NM" && NM=nm
-test -z "$SED" && SED=sed
-test -z "$OBJDUMP" && OBJDUMP=objdump
-test -z "$RANLIB" && RANLIB=:
-test -z "$STRIP" && STRIP=:
 test -z "$ac_objext" && ac_objext=o
 
-# Determine commands to create old-style static archives.
-old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs'
-old_postinstall_cmds='chmod 644 $oldlib'
-old_postuninstall_cmds=
-
-if test -n "$RANLIB"; then
-  case $host_os in
-  openbsd*)
-    old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$oldlib"
-    ;;
-  *)
-    old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$oldlib"
-    ;;
-  esac
-  old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib"
-fi
-
 _LT_CC_BASENAME([$compiler])
 
 # Only perform the check for file, if the check method requires it
+test -z "$MAGIC_CMD" && MAGIC_CMD=file
 case $deplibs_check_method in
 file_magic*)
   if test "$file_magic_cmd" = '$MAGIC_CMD'; then
-    AC_PATH_MAGIC
+    _LT_PATH_MAGIC
   fi
   ;;
 esac
 
-_LT_REQUIRED_DARWIN_CHECKS
+# Use C for the default configuration in the libtool script
+LT_SUPPORTED_TAG([CC])
+_LT_LANG_C_CONFIG
+_LT_LANG_DEFAULT_CONFIG
+_LT_CONFIG_COMMANDS
+])# _LT_SETUP
+
 
-AC_PROVIDE_IFELSE([AC_LIBTOOL_DLOPEN], enable_dlopen=yes, enable_dlopen=no)
-AC_PROVIDE_IFELSE([AC_LIBTOOL_WIN32_DLL],
-enable_win32_dll=yes, enable_win32_dll=no)
-
-AC_ARG_ENABLE([libtool-lock],
-    [AC_HELP_STRING([--disable-libtool-lock],
-	[avoid locking (might break parallel builds)])])
-test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
+# _LT_PROG_LTMAIN
+# ---------------
+# Note that this code is called both from `configure', and `config.status'
+# now that we use AC_CONFIG_COMMANDS to generate libtool.  Notably,
+# `config.status' has no value for ac_aux_dir unless we are using Automake,
+# so we pass a copy along to make sure it has a sensible value anyway.
+m4_defun([_LT_PROG_LTMAIN],
+[m4_ifdef([AC_REQUIRE_AUX_FILE], [AC_REQUIRE_AUX_FILE([ltmain.sh])])dnl
+_LT_CONFIG_LIBTOOL_INIT([ac_aux_dir='$ac_aux_dir'])
+ltmain="$ac_aux_dir/ltmain.sh"
+])# _LT_PROG_LTMAIN
 
-AC_ARG_WITH([pic],
-    [AC_HELP_STRING([--with-pic],
-	[try to use only PIC/non-PIC objects @<:@default=use both@:>@])],
-    [pic_mode="$withval"],
-    [pic_mode=default])
-test -z "$pic_mode" && pic_mode=default
 
-# Use C for the default configuration in the libtool script
-tagname=
-AC_LIBTOOL_LANG_C_CONFIG
-_LT_AC_TAGCONFIG
-])# AC_LIBTOOL_SETUP
+
+# So that we can recreate a full libtool script including additional
+# tags, we accumulate the chunks of code to send to AC_CONFIG_COMMANDS
+# in macros and then make a single call at the end using the `libtool'
+# label.
+
+
+# _LT_CONFIG_LIBTOOL_INIT([INIT-COMMANDS])
+# ----------------------------------------
+# Register INIT-COMMANDS to be passed to AC_CONFIG_COMMANDS later.
+m4_define([_LT_CONFIG_LIBTOOL_INIT],
+[m4_ifval([$1],
+          [m4_append([_LT_OUTPUT_LIBTOOL_INIT],
+                     [$1
+])])])
+
+# Initialize.
+m4_define([_LT_OUTPUT_LIBTOOL_INIT])
+
+
+# _LT_CONFIG_LIBTOOL([COMMANDS])
+# ------------------------------
+# Register COMMANDS to be passed to AC_CONFIG_COMMANDS later.
+m4_define([_LT_CONFIG_LIBTOOL],
+[m4_ifval([$1],
+          [m4_append([_LT_OUTPUT_LIBTOOL_COMMANDS],
+                     [$1
+])])])
+
+# Initialize.
+m4_define([_LT_OUTPUT_LIBTOOL_COMMANDS])
+
+
+# _LT_CONFIG_SAVE_COMMANDS([COMMANDS], [INIT_COMMANDS])
+# -----------------------------------------------------
+m4_defun([_LT_CONFIG_SAVE_COMMANDS],
+[_LT_CONFIG_LIBTOOL([$1])
+_LT_CONFIG_LIBTOOL_INIT([$2])
+])
+
+
+# _LT_FORMAT_COMMENT([COMMENT])
+# -----------------------------
+# Add leading comment marks to the start of each line, and a trailing
+# full-stop to the whole comment if one is not present already.
+m4_define([_LT_FORMAT_COMMENT],
+[m4_ifval([$1], [
+m4_bpatsubst([m4_bpatsubst([$1], [^ *], [# ])],
+              [['`$\]], [\\\&])]m4_bmatch([$1], [[!?.]$], [], [.])
+)])
+
+
+
+
+
+# _LT_DECL([CONFIGNAME], VARNAME, VALUE, [DESCRIPTION], [IS-TAGGED?])
+# -------------------------------------------------------------------
+# CONFIGNAME is the name given to the value in the libtool script.
+# VARNAME is the (base) name used in the configure script.
+# VALUE may be 0, 1 or 2 for a computed quote escaped value based on
+# VARNAME.  Any other value will be used directly.
+m4_define([_LT_DECL],
+[lt_if_append_uniq([lt_decl_varnames], [$2], [, ],
+    [lt_dict_add_subkey([lt_decl_dict], [$2], [libtool_name],
+	[m4_ifval([$1], [$1], [$2])])
+    lt_dict_add_subkey([lt_decl_dict], [$2], [value], [$3])
+    m4_ifval([$4],
+	[lt_dict_add_subkey([lt_decl_dict], [$2], [description], [$4])])
+    lt_dict_add_subkey([lt_decl_dict], [$2],
+	[tagged?], [m4_ifval([$5], [yes], [no])])])
+])
+
+
+# _LT_TAGDECL([CONFIGNAME], VARNAME, VALUE, [DESCRIPTION])
+# --------------------------------------------------------
+m4_define([_LT_TAGDECL], [_LT_DECL([$1], [$2], [$3], [$4], [yes])])
+
+
+# lt_decl_tag_varnames([SEPARATOR], [VARNAME1...])
+# ------------------------------------------------
+m4_define([lt_decl_tag_varnames],
+[_lt_decl_filter([tagged?], [yes], $@)])
+
+
+# _lt_decl_filter(SUBKEY, VALUE, [SEPARATOR], [VARNAME1..])
+# ---------------------------------------------------------
+m4_define([_lt_decl_filter],
+[m4_case([$#],
+  [0], [m4_fatal([$0: too few arguments: $#])],
+  [1], [m4_fatal([$0: too few arguments: $#: $1])],
+  [2], [lt_dict_filter([lt_decl_dict], [$1], [$2], [], lt_decl_varnames)],
+  [3], [lt_dict_filter([lt_decl_dict], [$1], [$2], [$3], lt_decl_varnames)],
+  [lt_dict_filter([lt_decl_dict], $@)])[]dnl
+])
+
+
+# lt_decl_quote_varnames([SEPARATOR], [VARNAME1...])
+# --------------------------------------------------
+m4_define([lt_decl_quote_varnames],
+[_lt_decl_filter([value], [1], $@)])
+
+
+# lt_decl_dquote_varnames([SEPARATOR], [VARNAME1...])
+# ---------------------------------------------------
+m4_define([lt_decl_dquote_varnames],
+[_lt_decl_filter([value], [2], $@)])
+
+
+# lt_decl_varnames_tagged([SEPARATOR], [VARNAME1...])
+# ---------------------------------------------------
+m4_define([lt_decl_varnames_tagged],
+[m4_assert([$# <= 2])dnl
+_$0(m4_quote(m4_default([$1], [[, ]])),
+    m4_ifval([$2], [[$2]], [m4_dquote(lt_decl_tag_varnames)]),
+    m4_split(m4_normalize(m4_quote(_LT_TAGS)), [ ]))])
+m4_define([_lt_decl_varnames_tagged],
+[m4_ifval([$3], [lt_combine([$1], [$2], [_], $3)])])
+
+
+# lt_decl_all_varnames([SEPARATOR], [VARNAME1...])
+# ------------------------------------------------
+m4_define([lt_decl_all_varnames],
+[_$0(m4_quote(m4_default([$1], [[, ]])),
+     m4_if([$2], [],
+	   m4_quote(lt_decl_varnames),
+	m4_quote(m4_shift($@))))[]dnl
+])
+m4_define([_lt_decl_all_varnames],
+[lt_join($@, lt_decl_varnames_tagged([$1],
+			lt_decl_tag_varnames([[, ]], m4_shift($@))))dnl
+])
+
+
+# _LT_CONFIG_STATUS_DECLARE([VARNAME])
+# ------------------------------------
+# Quote a variable value, and forward it to `config.status' so that its
+# declaration there will have the same value as in `configure'.  VARNAME
+# must have a single quote delimited value for this to work.
+m4_define([_LT_CONFIG_STATUS_DECLARE],
+[$1='`$ECHO "X$][$1" | $Xsed -e "$delay_single_quote_subst"`'])
+
+
+# _LT_CONFIG_STATUS_DECLARATIONS
+# ------------------------------
+# We delimit libtool config variables with single quotes, so when
+# we write them to config.status, we have to be sure to quote all
+# embedded single quotes properly.  In configure, this macro expands
+# each variable declared with _LT_DECL (and _LT_TAGDECL) into:
+#
+#    <var>='`$ECHO "X$<var>" | $Xsed -e "$delay_single_quote_subst"`'
+m4_defun([_LT_CONFIG_STATUS_DECLARATIONS],
+[m4_foreach([_lt_var], m4_quote(lt_decl_all_varnames),
+    [m4_n([_LT_CONFIG_STATUS_DECLARE(_lt_var)])])])
+
+
+# _LT_LIBTOOL_TAGS
+# ----------------
+# Output comment and list of tags supported by the script
+m4_defun([_LT_LIBTOOL_TAGS],
+[_LT_FORMAT_COMMENT([The names of the tagged configurations supported by this script])dnl
+available_tags="_LT_TAGS"dnl
+])
+
+
+# _LT_LIBTOOL_DECLARE(VARNAME, [TAG])
+# -----------------------------------
+# Extract the dictionary values for VARNAME (optionally with TAG) and
+# expand to a commented shell variable setting:
+#
+#    # Some comment about what VAR is for.
+#    visible_name=$lt_internal_name
+m4_define([_LT_LIBTOOL_DECLARE],
+[_LT_FORMAT_COMMENT(m4_quote(lt_dict_fetch([lt_decl_dict], [$1],
+					   [description])))[]dnl
+m4_pushdef([_libtool_name],
+    m4_quote(lt_dict_fetch([lt_decl_dict], [$1], [libtool_name])))[]dnl
+m4_case(m4_quote(lt_dict_fetch([lt_decl_dict], [$1], [value])),
+    [0], [_libtool_name=[$]$1],
+    [1], [_libtool_name=$lt_[]$1],
+    [2], [_libtool_name=$lt_[]$1],
+    [_libtool_name=lt_dict_fetch([lt_decl_dict], [$1], [value])])[]dnl
+m4_ifval([$2], [_$2])[]m4_popdef([_libtool_name])[]dnl
+])
+
+
+# _LT_LIBTOOL_CONFIG_VARS
+# -----------------------
+# Produce commented declarations of non-tagged libtool config variables
+# suitable for insertion in the LIBTOOL CONFIG section of the `libtool'
+# script.  Tagged libtool config variables (even for the LIBTOOL CONFIG
+# section) are produced by _LT_LIBTOOL_TAG_VARS.
+m4_defun([_LT_LIBTOOL_CONFIG_VARS],
+[m4_foreach([_lt_var],
+    m4_quote(_lt_decl_filter([tagged?], [no], [], lt_decl_varnames)),
+    [m4_n([_LT_LIBTOOL_DECLARE(_lt_var)])])])
+
+
+# _LT_LIBTOOL_TAG_VARS(TAG)
+# -------------------------
+m4_define([_LT_LIBTOOL_TAG_VARS],
+[m4_foreach([_lt_var], m4_quote(lt_decl_tag_varnames),
+    [m4_n([_LT_LIBTOOL_DECLARE(_lt_var, [$1])])])])
+
+
+# _LT_TAGVAR(VARNAME, [TAGNAME])
+# ------------------------------
+m4_define([_LT_TAGVAR], [m4_ifval([$2], [$1_$2], [$1])])
 
 
-# _LT_AC_SYS_COMPILER
+# _LT_CONFIG_COMMANDS
 # -------------------
-AC_DEFUN([_LT_AC_SYS_COMPILER],
+# Send accumulated output to $CONFIG_STATUS.  Thanks to the lists of
+# variables for single and double quote escaping we saved from calls
+# to _LT_DECL, we can put quote escaped variables declarations
+# into `config.status', and then the shell code to quote escape them in
+# for loops in `config.status'.  Finally, any additional code accumulated
+# from calls to _LT_CONFIG_LIBTOOL_INIT is expanded.
+m4_defun([_LT_CONFIG_COMMANDS],
+[AC_PROVIDE_IFELSE([LT_OUTPUT],
+	dnl If the libtool generation code has been placed in $CONFIG_LT,
+	dnl instead of duplicating it all over again into config.status,
+	dnl then we will have config.status run $CONFIG_LT later, so it
+	dnl needs to know what name is stored there:
+        [AC_CONFIG_COMMANDS([libtool],
+            [$SHELL $CONFIG_LT || AS_EXIT(1)], [CONFIG_LT='$CONFIG_LT'])],
+    dnl If the libtool generation code is destined for config.status,
+    dnl expand the accumulated commands and init code now:
+    [AC_CONFIG_COMMANDS([libtool],
+        [_LT_OUTPUT_LIBTOOL_COMMANDS], [_LT_OUTPUT_LIBTOOL_COMMANDS_INIT])])
+])#_LT_CONFIG_COMMANDS
+
+
+# Initialize.
+m4_define([_LT_OUTPUT_LIBTOOL_COMMANDS_INIT],
+[
+
+# The HP-UX ksh and POSIX shell print the target directory to stdout
+# if CDPATH is set.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+sed_quote_subst='$sed_quote_subst'
+double_quote_subst='$double_quote_subst'
+delay_variable_subst='$delay_variable_subst'
+_LT_CONFIG_STATUS_DECLARATIONS
+LTCC='$LTCC'
+LTCFLAGS='$LTCFLAGS'
+compiler='$compiler_DEFAULT'
+
+# Quote evaled strings.
+for var in lt_decl_all_varnames([[ \
+]], lt_decl_quote_varnames); do
+    case \`eval \\\\\$ECHO "X\\\\\$\$var"\` in
+    *[[\\\\\\\`\\"\\\$]]*)
+      eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"X\\\$\$var\\" | \\\$Xsed -e \\"\\\$sed_quote_subst\\"\\\`\\\\\\""
+      ;;
+    *)
+      eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
+      ;;
+    esac
+done
+
+# Double-quote double-evaled strings.
+for var in lt_decl_all_varnames([[ \
+]], lt_decl_dquote_varnames); do
+    case \`eval \\\\\$ECHO "X\\\\\$\$var"\` in
+    *[[\\\\\\\`\\"\\\$]]*)
+      eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"X\\\$\$var\\" | \\\$Xsed -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\""
+      ;;
+    *)
+      eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
+      ;;
+    esac
+done
+
+# Fix-up fallback echo if it was mangled by the above quoting rules.
+case \$lt_ECHO in
+*'\\\[$]0 --fallback-echo"')dnl "
+  lt_ECHO=\`\$ECHO "X\$lt_ECHO" | \$Xsed -e 's/\\\\\\\\\\\\\\\[$]0 --fallback-echo"\[$]/\[$]0 --fallback-echo"/'\`
+  ;;
+esac
+
+_LT_OUTPUT_LIBTOOL_INIT
+])
+
+
+# LT_OUTPUT
+# ---------
+# This macro allows early generation of the libtool script (before
+# AC_OUTPUT is called), incase it is used in configure for compilation
+# tests.
+AC_DEFUN([LT_OUTPUT],
+[: ${CONFIG_LT=./config.lt}
+AC_MSG_NOTICE([creating $CONFIG_LT])
+cat >"$CONFIG_LT" <<_LTEOF
+#! $SHELL
+# Generated by $as_me.
+# Run this file to recreate a libtool stub with the current configuration.
+
+lt_cl_silent=false
+SHELL=\${CONFIG_SHELL-$SHELL}
+_LTEOF
+
+cat >>"$CONFIG_LT" <<\_LTEOF
+AS_SHELL_SANITIZE
+_AS_PREPARE
+
+exec AS_MESSAGE_FD>&1
+exec AS_MESSAGE_LOG_FD>>config.log
+{
+  echo
+  AS_BOX([Running $as_me.])
+} >&AS_MESSAGE_LOG_FD
+
+lt_cl_help="\
+\`$as_me' creates a local libtool stub from the current configuration,
+for use in further configure time tests before the real libtool is
+generated.
+
+Usage: $[0] [[OPTIONS]]
+
+  -h, --help      print this help, then exit
+  -V, --version   print version number, then exit
+  -q, --quiet     do not print progress messages
+  -d, --debug     don't remove temporary files
+
+Report bugs to <bug-libtool@gnu.org>."
+
+lt_cl_version="\
+m4_ifset([AC_PACKAGE_NAME], [AC_PACKAGE_NAME ])config.lt[]dnl
+m4_ifset([AC_PACKAGE_VERSION], [ AC_PACKAGE_VERSION])
+configured by $[0], generated by m4_PACKAGE_STRING.
+
+Copyright (C) 2008 Free Software Foundation, Inc.
+This config.lt script is free software; the Free Software Foundation
+gives unlimited permision to copy, distribute and modify it."
+
+while test $[#] != 0
+do
+  case $[1] in
+    --version | --v* | -V )
+      echo "$lt_cl_version"; exit 0 ;;
+    --help | --h* | -h )
+      echo "$lt_cl_help"; exit 0 ;;
+    --debug | --d* | -d )
+      debug=: ;;
+    --quiet | --q* | --silent | --s* | -q )
+      lt_cl_silent=: ;;
+
+    -*) AC_MSG_ERROR([unrecognized option: $[1]
+Try \`$[0] --help' for more information.]) ;;
+
+    *) AC_MSG_ERROR([unrecognized argument: $[1]
+Try \`$[0] --help' for more information.]) ;;
+  esac
+  shift
+done
+
+if $lt_cl_silent; then
+  exec AS_MESSAGE_FD>/dev/null
+fi
+_LTEOF
+
+cat >>"$CONFIG_LT" <<_LTEOF
+_LT_OUTPUT_LIBTOOL_COMMANDS_INIT
+_LTEOF
+
+cat >>"$CONFIG_LT" <<\_LTEOF
+AC_MSG_NOTICE([creating $ofile])
+_LT_OUTPUT_LIBTOOL_COMMANDS
+AS_EXIT(0)
+_LTEOF
+chmod +x "$CONFIG_LT"
+
+# configure is writing to config.log, but config.lt does its own redirection,
+# appending to config.log, which fails on DOS, as config.log is still kept
+# open by configure.  Here we exec the FD to /dev/null, effectively closing
+# config.log, so it can be properly (re)opened and appended to by config.lt.
+if test "$no_create" != yes; then
+  lt_cl_success=:
+  test "$silent" = yes &&
+    lt_config_lt_args="$lt_config_lt_args --quiet"
+  exec AS_MESSAGE_LOG_FD>/dev/null
+  $SHELL "$CONFIG_LT" $lt_config_lt_args || lt_cl_success=false
+  exec AS_MESSAGE_LOG_FD>>config.log
+  $lt_cl_success || AS_EXIT(1)
+fi
+])# LT_OUTPUT
+
+
+# _LT_CONFIG(TAG)
+# ---------------
+# If TAG is the built-in tag, create an initial libtool script with a
+# default configuration from the untagged config vars.  Otherwise add code
+# to config.status for appending the configuration named by TAG from the
+# matching tagged config vars.
+m4_defun([_LT_CONFIG],
+[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+_LT_CONFIG_SAVE_COMMANDS([
+  m4_define([_LT_TAG], m4_if([$1], [], [C], [$1]))dnl
+  m4_if(_LT_TAG, [C], [
+    # See if we are running on zsh, and set the options which allow our
+    # commands through without removal of \ escapes.
+    if test -n "${ZSH_VERSION+set}" ; then
+      setopt NO_GLOB_SUBST
+    fi
+
+    cfgfile="${ofile}T"
+    trap "$RM \"$cfgfile\"; exit 1" 1 2 15
+    $RM "$cfgfile"
+
+    cat <<_LT_EOF >> "$cfgfile"
+#! $SHELL
+
+# `$ECHO "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services.
+# Generated automatically by $as_me ($PACKAGE$TIMESTAMP) $VERSION
+# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
+# NOTE: Changes made to this file will be lost: look at ltmain.sh.
+#
+_LT_COPYING
+_LT_LIBTOOL_TAGS
+
+# ### BEGIN LIBTOOL CONFIG
+_LT_LIBTOOL_CONFIG_VARS
+_LT_LIBTOOL_TAG_VARS
+# ### END LIBTOOL CONFIG
+
+_LT_EOF
+
+  case $host_os in
+  aix3*)
+    cat <<\_LT_EOF >> "$cfgfile"
+# AIX sometimes has problems with the GCC collect2 program.  For some
+# reason, if we set the COLLECT_NAMES environment variable, the problems
+# vanish in a puff of smoke.
+if test "X${COLLECT_NAMES+set}" != Xset; then
+  COLLECT_NAMES=
+  export COLLECT_NAMES
+fi
+_LT_EOF
+    ;;
+  esac
+
+  _LT_PROG_LTMAIN
+
+  # We use sed instead of cat because bash on DJGPP gets confused if
+  # if finds mixed CR/LF and LF-only lines.  Since sed operates in
+  # text mode, it properly converts lines to CR/LF.  This bash problem
+  # is reportedly fixed, but why not run on old versions too?
+  sed '/^# Generated shell functions inserted here/q' "$ltmain" >> "$cfgfile" \
+    || (rm -f "$cfgfile"; exit 1)
+
+  _LT_PROG_XSI_SHELLFNS
+
+  sed -n '/^# Generated shell functions inserted here/,$p' "$ltmain" >> "$cfgfile" \
+    || (rm -f "$cfgfile"; exit 1)
+
+  mv -f "$cfgfile" "$ofile" ||
+    (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")
+  chmod +x "$ofile"
+],
+[cat <<_LT_EOF >> "$ofile"
+
+dnl Unfortunately we have to use $1 here, since _LT_TAG is not expanded
+dnl in a comment (ie after a #).
+# ### BEGIN LIBTOOL TAG CONFIG: $1
+_LT_LIBTOOL_TAG_VARS(_LT_TAG)
+# ### END LIBTOOL TAG CONFIG: $1
+_LT_EOF
+])dnl /m4_if
+],
+[m4_if([$1], [], [
+    PACKAGE='$PACKAGE'
+    VERSION='$VERSION'
+    TIMESTAMP='$TIMESTAMP'
+    RM='$RM'
+    ofile='$ofile'], [])
+])dnl /_LT_CONFIG_SAVE_COMMANDS
+])# _LT_CONFIG
+
+
+# LT_SUPPORTED_TAG(TAG)
+# ---------------------
+# Trace this macro to discover what tags are supported by the libtool
+# --tag option, using:
+#    autoconf --trace 'LT_SUPPORTED_TAG:$1'
+AC_DEFUN([LT_SUPPORTED_TAG], [])
+
+
+# C support is built-in for now
+m4_define([_LT_LANG_C_enabled], [])
+m4_define([_LT_TAGS], [])
+
+
+# LT_LANG(LANG)
+# -------------
+# Enable libtool support for the given language if not already enabled.
+AC_DEFUN([LT_LANG],
+[AC_BEFORE([$0], [LT_OUTPUT])dnl
+m4_case([$1],
+  [C],			[_LT_LANG(C)],
+  [C++],		[_LT_LANG(CXX)],
+  [Java],		[_LT_LANG(GCJ)],
+  [Fortran 77],		[_LT_LANG(F77)],
+  [Fortran],		[_LT_LANG(FC)],
+  [Windows Resource],	[_LT_LANG(RC)],
+  [m4_ifdef([_LT_LANG_]$1[_CONFIG],
+    [_LT_LANG($1)],
+    [m4_fatal([$0: unsupported language: "$1"])])])dnl
+])# LT_LANG
+
+
+# _LT_LANG(LANGNAME)
+# ------------------
+m4_defun([_LT_LANG],
+[m4_ifdef([_LT_LANG_]$1[_enabled], [],
+  [LT_SUPPORTED_TAG([$1])dnl
+  m4_append([_LT_TAGS], [$1 ])dnl
+  m4_define([_LT_LANG_]$1[_enabled], [])dnl
+  _LT_LANG_$1_CONFIG($1)])dnl
+])# _LT_LANG
+
+
+# _LT_LANG_DEFAULT_CONFIG
+# -----------------------
+m4_defun([_LT_LANG_DEFAULT_CONFIG],
+[AC_PROVIDE_IFELSE([AC_PROG_CXX],
+  [LT_LANG(CXX)],
+  [m4_define([AC_PROG_CXX], defn([AC_PROG_CXX])[LT_LANG(CXX)])])
+
+AC_PROVIDE_IFELSE([AC_PROG_F77],
+  [LT_LANG(F77)],
+  [m4_define([AC_PROG_F77], defn([AC_PROG_F77])[LT_LANG(F77)])])
+
+AC_PROVIDE_IFELSE([AC_PROG_FC],
+  [LT_LANG(FC)],
+  [m4_define([AC_PROG_FC], defn([AC_PROG_FC])[LT_LANG(FC)])])
+
+dnl The call to [A][M_PROG_GCJ] is quoted like that to stop aclocal
+dnl pulling things in needlessly.
+AC_PROVIDE_IFELSE([AC_PROG_GCJ],
+  [LT_LANG(GCJ)],
+  [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],
+    [LT_LANG(GCJ)],
+    [AC_PROVIDE_IFELSE([LT_PROG_GCJ],
+      [LT_LANG(GCJ)],
+      [m4_ifdef([AC_PROG_GCJ],
+	[m4_define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[LT_LANG(GCJ)])])
+       m4_ifdef([A][M_PROG_GCJ],
+	[m4_define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[LT_LANG(GCJ)])])
+       m4_ifdef([LT_PROG_GCJ],
+	[m4_define([LT_PROG_GCJ], defn([LT_PROG_GCJ])[LT_LANG(GCJ)])])])])])
+
+AC_PROVIDE_IFELSE([LT_PROG_RC],
+  [LT_LANG(RC)],
+  [m4_define([LT_PROG_RC], defn([LT_PROG_RC])[LT_LANG(RC)])])
+])# _LT_LANG_DEFAULT_CONFIG
+
+# Obsolete macros:
+AU_DEFUN([AC_LIBTOOL_CXX], [LT_LANG(C++)])
+AU_DEFUN([AC_LIBTOOL_F77], [LT_LANG(Fortran 77)])
+AU_DEFUN([AC_LIBTOOL_FC], [LT_LANG(Fortran)])
+AU_DEFUN([AC_LIBTOOL_GCJ], [LT_LANG(Java)])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LIBTOOL_CXX], [])
+dnl AC_DEFUN([AC_LIBTOOL_F77], [])
+dnl AC_DEFUN([AC_LIBTOOL_FC], [])
+dnl AC_DEFUN([AC_LIBTOOL_GCJ], [])
+
+
+# _LT_TAG_COMPILER
+# ----------------
+m4_defun([_LT_TAG_COMPILER],
 [AC_REQUIRE([AC_PROG_CC])dnl
 
+_LT_DECL([LTCC], [CC], [1], [A C compiler])dnl
+_LT_DECL([LTCFLAGS], [CFLAGS], [1], [LTCC compiler flags])dnl
+_LT_TAGDECL([CC], [compiler], [1], [A language specific compiler])dnl
+_LT_TAGDECL([with_gcc], [GCC], [0], [Is the compiler the GNU compiler?])dnl
+
 # If no C compiler was specified, use CC.
 LTCC=${LTCC-"$CC"}
 
@@ -248,36 +871,20 @@
 
 # Allow CC to be a program name with arguments.
 compiler=$CC
-])# _LT_AC_SYS_COMPILER
-
-
-# _LT_CC_BASENAME(CC)
-# -------------------
-# Calculate cc_basename.  Skip known compiler wrappers and cross-prefix.
-AC_DEFUN([_LT_CC_BASENAME],
-[for cc_temp in $1""; do
-  case $cc_temp in
-    compile | *[[\\/]]compile | ccache | *[[\\/]]ccache ) ;;
-    distcc | *[[\\/]]distcc | purify | *[[\\/]]purify ) ;;
-    \-*) ;;
-    *) break;;
-  esac
-done
-cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
-])
+])# _LT_TAG_COMPILER
 
 
 # _LT_COMPILER_BOILERPLATE
 # ------------------------
 # Check for compiler boilerplate output or warnings with
 # the simple compiler test code.
-AC_DEFUN([_LT_COMPILER_BOILERPLATE],
-[AC_REQUIRE([LT_AC_PROG_SED])dnl
+m4_defun([_LT_COMPILER_BOILERPLATE],
+[m4_require([_LT_DECL_SED])dnl
 ac_outfile=conftest.$ac_objext
 echo "$lt_simple_compile_test_code" >conftest.$ac_ext
 eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
 _lt_compiler_boilerplate=`cat conftest.err`
-$rm conftest*
+$RM conftest*
 ])# _LT_COMPILER_BOILERPLATE
 
 
@@ -285,39 +892,57 @@
 # ----------------------
 # Check for linker boilerplate output or warnings with
 # the simple link test code.
-AC_DEFUN([_LT_LINKER_BOILERPLATE],
-[AC_REQUIRE([LT_AC_PROG_SED])dnl
+m4_defun([_LT_LINKER_BOILERPLATE],
+[m4_require([_LT_DECL_SED])dnl
 ac_outfile=conftest.$ac_objext
 echo "$lt_simple_link_test_code" >conftest.$ac_ext
 eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
 _lt_linker_boilerplate=`cat conftest.err`
-$rm -r conftest*
+$RM -r conftest*
 ])# _LT_LINKER_BOILERPLATE
 
 # _LT_REQUIRED_DARWIN_CHECKS
-# --------------------------
-# Check for some things on darwin
-AC_DEFUN([_LT_REQUIRED_DARWIN_CHECKS],[
+# -------------------------
+m4_defun_once([_LT_REQUIRED_DARWIN_CHECKS],[
   case $host_os in
     rhapsody* | darwin*)
     AC_CHECK_TOOL([DSYMUTIL], [dsymutil], [:])
     AC_CHECK_TOOL([NMEDIT], [nmedit], [:])
+    AC_CHECK_TOOL([LIPO], [lipo], [:])
+    AC_CHECK_TOOL([OTOOL], [otool], [:])
+    AC_CHECK_TOOL([OTOOL64], [otool64], [:])
+    _LT_DECL([], [DSYMUTIL], [1],
+      [Tool to manipulate archived DWARF debug symbol files on Mac OS X])
+    _LT_DECL([], [NMEDIT], [1],
+      [Tool to change global to local symbols on Mac OS X])
+    _LT_DECL([], [LIPO], [1],
+      [Tool to manipulate fat objects and archives on Mac OS X])
+    _LT_DECL([], [OTOOL], [1],
+      [ldd/readelf like tool for Mach-O binaries on Mac OS X])
+    _LT_DECL([], [OTOOL64], [1],
+      [ldd/readelf like tool for 64 bit Mach-O binaries on Mac OS X 10.4])
 
     AC_CACHE_CHECK([for -single_module linker flag],[lt_cv_apple_cc_single_mod],
       [lt_cv_apple_cc_single_mod=no
       if test -z "${LT_MULTI_MODULE}"; then
-   # By default we will add the -single_module flag. You can override
-   # by either setting the environment variable LT_MULTI_MODULE
-   # non-empty at configure time, or by adding -multi_module to the
-   # link flags.
-   echo "int foo(void){return 1;}" > conftest.c
-   $LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
-     -dynamiclib ${wl}-single_module conftest.c
-   if test -f libconftest.dylib; then
-     lt_cv_apple_cc_single_mod=yes
-     rm -rf libconftest.dylib*
-   fi
-   rm conftest.c
+	# By default we will add the -single_module flag. You can override
+	# by either setting the environment variable LT_MULTI_MODULE
+	# non-empty at configure time, or by adding -multi_module to the
+	# link flags.
+	rm -rf libconftest.dylib*
+	echo "int foo(void){return 1;}" > conftest.c
+	echo "$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
+-dynamiclib -Wl,-single_module conftest.c" >&AS_MESSAGE_LOG_FD
+	$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
+	  -dynamiclib -Wl,-single_module conftest.c 2>conftest.err
+        _lt_result=$?
+	if test -f libconftest.dylib && test ! -s conftest.err && test $_lt_result = 0; then
+	  lt_cv_apple_cc_single_mod=yes
+	else
+	  cat conftest.err >&AS_MESSAGE_LOG_FD
+	fi
+	rm -rf libconftest.dylib*
+	rm -f conftest.*
       fi])
     AC_CACHE_CHECK([for -exported_symbols_list linker flag],
       [lt_cv_ld_exported_symbols_list],
@@ -326,26 +951,26 @@
       echo "_main" > conftest.sym
       LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym"
       AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])],
-   [lt_cv_ld_exported_symbols_list=yes],
-   [lt_cv_ld_exported_symbols_list=no])
-   LDFLAGS="$save_LDFLAGS"
+	[lt_cv_ld_exported_symbols_list=yes],
+	[lt_cv_ld_exported_symbols_list=no])
+	LDFLAGS="$save_LDFLAGS"
     ])
     case $host_os in
-    rhapsody* | darwin1.[[0123]])
+    rhapsody* | darwin1.[[012]])
       _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;;
     darwin1.*)
-     _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
-    darwin*)
+      _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
+    darwin*) # darwin 5.x on
       # if running on 10.5 or later, the deployment target defaults
       # to the OS version, if on x86, and 10.4, the deployment
       # target defaults to 10.4. Don't you love it?
       case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in
-   10.0,*86*-darwin8*|10.0,*-darwin[[91]]*)
-     _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
-   10.[[012]]*)
-     _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
-   10.*)
-     _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
+	10.0,*86*-darwin8*|10.0,*-darwin[[91]]*)
+	  _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
+	10.[[012]]*)
+	  _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
+	10.*)
+	  _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
       esac
     ;;
   esac
@@ -355,10 +980,10 @@
     if test "$lt_cv_ld_exported_symbols_list" = "yes"; then
       _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym'
     else
-      _lt_dar_export_syms="~$NMEDIT -s \$output_objdir/\${libname}-symbols.expsym \${lib}"
+      _lt_dar_export_syms='~$NMEDIT -s $output_objdir/${libname}-symbols.expsym ${lib}'
     fi
     if test "$DSYMUTIL" != ":"; then
-      _lt_dsymutil="~$DSYMUTIL \$lib || :"
+      _lt_dsymutil='~$DSYMUTIL $lib || :'
     else
       _lt_dsymutil=
     fi
@@ -366,16 +991,51 @@
   esac
 ])
 
-# _LT_AC_SYS_LIBPATH_AIX
-# ----------------------
-# Links a minimal program and checks the executable
-# for the system default hardcoded library path. In most cases,
-# this is /usr/lib:/lib, but when the MPI compilers are used
+
+# _LT_DARWIN_LINKER_FEATURES
+# --------------------------
+# Checks for linker and compiler features on darwin
+m4_defun([_LT_DARWIN_LINKER_FEATURES],
+[
+  m4_require([_LT_REQUIRED_DARWIN_CHECKS])
+  _LT_TAGVAR(archive_cmds_need_lc, $1)=no
+  _LT_TAGVAR(hardcode_direct, $1)=no
+  _LT_TAGVAR(hardcode_automatic, $1)=yes
+  _LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
+  _LT_TAGVAR(whole_archive_flag_spec, $1)=''
+  _LT_TAGVAR(link_all_deplibs, $1)=yes
+  _LT_TAGVAR(allow_undefined_flag, $1)="$_lt_dar_allow_undefined"
+  case $cc_basename in
+     ifort*) _lt_dar_can_shared=yes ;;
+     *) _lt_dar_can_shared=$GCC ;;
+  esac
+  if test "$_lt_dar_can_shared" = "yes"; then
+    output_verbose_link_cmd=echo
+    _LT_TAGVAR(archive_cmds, $1)="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}"
+    _LT_TAGVAR(module_cmds, $1)="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}"
+    _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}"
+    _LT_TAGVAR(module_expsym_cmds, $1)="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}"
+    m4_if([$1], [CXX],
+[   if test "$lt_cv_apple_cc_single_mod" != "yes"; then
+      _LT_TAGVAR(archive_cmds, $1)="\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dsymutil}"
+      _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dar_export_syms}${_lt_dsymutil}"
+    fi
+],[])
+  else
+  _LT_TAGVAR(ld_shlibs, $1)=no
+  fi
+])
+
+# _LT_SYS_MODULE_PATH_AIX
+# -----------------------
+# Links a minimal program and checks the executable
+# for the system default hardcoded library path. In most cases,
+# this is /usr/lib:/lib, but when the MPI compilers are used
 # the location of the communication and MPI libs are included too.
 # If we don't find anything, use the default library path according
 # to the aix ld manual.
-AC_DEFUN([_LT_AC_SYS_LIBPATH_AIX],
-[AC_REQUIRE([LT_AC_PROG_SED])dnl
+m4_defun([_LT_SYS_MODULE_PATH_AIX],
+[m4_require([_LT_DECL_SED])dnl
 AC_LINK_IFELSE(AC_LANG_PROGRAM,[
 lt_aix_libpath_sed='
     /Import File Strings/,/^$/ {
@@ -390,45 +1050,45 @@
   aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
 fi],[])
 if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
-])# _LT_AC_SYS_LIBPATH_AIX
+])# _LT_SYS_MODULE_PATH_AIX
 
 
-# _LT_AC_SHELL_INIT(ARG)
-# ----------------------
-AC_DEFUN([_LT_AC_SHELL_INIT],
+# _LT_SHELL_INIT(ARG)
+# -------------------
+m4_define([_LT_SHELL_INIT],
 [ifdef([AC_DIVERSION_NOTICE],
 	     [AC_DIVERT_PUSH(AC_DIVERSION_NOTICE)],
 	 [AC_DIVERT_PUSH(NOTICE)])
 $1
 AC_DIVERT_POP
-])# _LT_AC_SHELL_INIT
+])# _LT_SHELL_INIT
 
 
-# _LT_AC_PROG_ECHO_BACKSLASH
-# --------------------------
+# _LT_PROG_ECHO_BACKSLASH
+# -----------------------
 # Add some code to the start of the generated configure script which
 # will find an echo command which doesn't interpret backslashes.
-AC_DEFUN([_LT_AC_PROG_ECHO_BACKSLASH],
-[_LT_AC_SHELL_INIT([
+m4_defun([_LT_PROG_ECHO_BACKSLASH],
+[_LT_SHELL_INIT([
 # Check that we are running under the correct shell.
 SHELL=${CONFIG_SHELL-/bin/sh}
 
-case X$ECHO in
+case X$lt_ECHO in
 X*--fallback-echo)
   # Remove one level of quotation (which was required for Make).
-  ECHO=`echo "$ECHO" | sed 's,\\\\\[$]\\[$]0,'[$]0','`
+  ECHO=`echo "$lt_ECHO" | sed 's,\\\\\[$]\\[$]0,'[$]0','`
   ;;
 esac
 
-echo=${ECHO-echo}
+ECHO=${lt_ECHO-echo}
 if test "X[$]1" = X--no-reexec; then
   # Discard the --no-reexec flag, and continue.
   shift
 elif test "X[$]1" = X--fallback-echo; then
   # Avoid inline document here, it may be left over
   :
-elif test "X`($echo '\t') 2>/dev/null`" = 'X\t' ; then
-  # Yippee, $echo works!
+elif test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' ; then
+  # Yippee, $ECHO works!
   :
 else
   # Restart under the correct shell.
@@ -438,9 +1098,9 @@
 if test "X[$]1" = X--fallback-echo; then
   # used as fallback echo
   shift
-  cat <<EOF
+  cat <<_LT_EOF
 [$]*
-EOF
+_LT_EOF
   exit 0
 fi
 
@@ -448,124 +1108,127 @@
 # if CDPATH is set.
 (unset CDPATH) >/dev/null 2>&1 && unset CDPATH
 
-if test -z "$ECHO"; then
-if test "X${echo_test_string+set}" != Xset; then
-# find a string as large as possible, as long as the shell can cope with it
-  for cmd in 'sed 50q "[$]0"' 'sed 20q "[$]0"' 'sed 10q "[$]0"' 'sed 2q "[$]0"' 'echo test'; do
-    # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ...
-    if (echo_test_string=`eval $cmd`) 2>/dev/null &&
-       echo_test_string=`eval $cmd` &&
-       (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null
-    then
-      break
-    fi
-  done
-fi
+if test -z "$lt_ECHO"; then
+  if test "X${echo_test_string+set}" != Xset; then
+    # find a string as large as possible, as long as the shell can cope with it
+    for cmd in 'sed 50q "[$]0"' 'sed 20q "[$]0"' 'sed 10q "[$]0"' 'sed 2q "[$]0"' 'echo test'; do
+      # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ...
+      if { echo_test_string=`eval $cmd`; } 2>/dev/null &&
+	 { test "X$echo_test_string" = "X$echo_test_string"; } 2>/dev/null
+      then
+        break
+      fi
+    done
+  fi
 
-if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
-   echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
-   test "X$echo_testing_string" = "X$echo_test_string"; then
-  :
-else
-  # The Solaris, AIX, and Digital Unix default echo programs unquote
-  # backslashes.  This makes it impossible to quote backslashes using
-  #   echo "$something" | sed 's/\\/\\\\/g'
-  #
-  # So, first we look for a working echo in the user's PATH.
+  if test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' &&
+     echo_testing_string=`{ $ECHO "$echo_test_string"; } 2>/dev/null` &&
+     test "X$echo_testing_string" = "X$echo_test_string"; then
+    :
+  else
+    # The Solaris, AIX, and Digital Unix default echo programs unquote
+    # backslashes.  This makes it impossible to quote backslashes using
+    #   echo "$something" | sed 's/\\/\\\\/g'
+    #
+    # So, first we look for a working echo in the user's PATH.
 
-  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-  for dir in $PATH /usr/ucb; do
+    lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+    for dir in $PATH /usr/ucb; do
+      IFS="$lt_save_ifs"
+      if (test -f $dir/echo || test -f $dir/echo$ac_exeext) &&
+         test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' &&
+         echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` &&
+         test "X$echo_testing_string" = "X$echo_test_string"; then
+        ECHO="$dir/echo"
+        break
+      fi
+    done
     IFS="$lt_save_ifs"
-    if (test -f $dir/echo || test -f $dir/echo$ac_exeext) &&
-       test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' &&
-       echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` &&
-       test "X$echo_testing_string" = "X$echo_test_string"; then
-      echo="$dir/echo"
-      break
-    fi
-  done
-  IFS="$lt_save_ifs"
 
-  if test "X$echo" = Xecho; then
-    # We didn't find a better echo, so look for alternatives.
-    if test "X`(print -r '\t') 2>/dev/null`" = 'X\t' &&
-       echo_testing_string=`(print -r "$echo_test_string") 2>/dev/null` &&
-       test "X$echo_testing_string" = "X$echo_test_string"; then
-      # This shell has a builtin print -r that does the trick.
-      echo='print -r'
-    elif (test -f /bin/ksh || test -f /bin/ksh$ac_exeext) &&
-	 test "X$CONFIG_SHELL" != X/bin/ksh; then
-      # If we have ksh, try running configure again with it.
-      ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh}
-      export ORIGINAL_CONFIG_SHELL
-      CONFIG_SHELL=/bin/ksh
-      export CONFIG_SHELL
-      exec $CONFIG_SHELL "[$]0" --no-reexec ${1+"[$]@"}
-    else
-      # Try using printf.
-      echo='printf %s\n'
-      if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
-	 echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
-	 test "X$echo_testing_string" = "X$echo_test_string"; then
-	# Cool, printf works
-	:
-      elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` &&
-	   test "X$echo_testing_string" = 'X\t' &&
-	   echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
-	   test "X$echo_testing_string" = "X$echo_test_string"; then
-	CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL
-	export CONFIG_SHELL
-	SHELL="$CONFIG_SHELL"
-	export SHELL
-	echo="$CONFIG_SHELL [$]0 --fallback-echo"
-      elif echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` &&
-	   test "X$echo_testing_string" = 'X\t' &&
-	   echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
-	   test "X$echo_testing_string" = "X$echo_test_string"; then
-	echo="$CONFIG_SHELL [$]0 --fallback-echo"
+    if test "X$ECHO" = Xecho; then
+      # We didn't find a better echo, so look for alternatives.
+      if test "X`{ print -r '\t'; } 2>/dev/null`" = 'X\t' &&
+         echo_testing_string=`{ print -r "$echo_test_string"; } 2>/dev/null` &&
+         test "X$echo_testing_string" = "X$echo_test_string"; then
+        # This shell has a builtin print -r that does the trick.
+        ECHO='print -r'
+      elif { test -f /bin/ksh || test -f /bin/ksh$ac_exeext; } &&
+	   test "X$CONFIG_SHELL" != X/bin/ksh; then
+        # If we have ksh, try running configure again with it.
+        ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh}
+        export ORIGINAL_CONFIG_SHELL
+        CONFIG_SHELL=/bin/ksh
+        export CONFIG_SHELL
+        exec $CONFIG_SHELL "[$]0" --no-reexec ${1+"[$]@"}
       else
-	# maybe with a smaller string...
-	prev=:
+        # Try using printf.
+        ECHO='printf %s\n'
+        if test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' &&
+	   echo_testing_string=`{ $ECHO "$echo_test_string"; } 2>/dev/null` &&
+	   test "X$echo_testing_string" = "X$echo_test_string"; then
+	  # Cool, printf works
+	  :
+        elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` &&
+	     test "X$echo_testing_string" = 'X\t' &&
+	     echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
+	     test "X$echo_testing_string" = "X$echo_test_string"; then
+	  CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL
+	  export CONFIG_SHELL
+	  SHELL="$CONFIG_SHELL"
+	  export SHELL
+	  ECHO="$CONFIG_SHELL [$]0 --fallback-echo"
+        elif echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` &&
+	     test "X$echo_testing_string" = 'X\t' &&
+	     echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
+	     test "X$echo_testing_string" = "X$echo_test_string"; then
+	  ECHO="$CONFIG_SHELL [$]0 --fallback-echo"
+        else
+	  # maybe with a smaller string...
+	  prev=:
 
-	for cmd in 'echo test' 'sed 2q "[$]0"' 'sed 10q "[$]0"' 'sed 20q "[$]0"' 'sed 50q "[$]0"'; do
-	  if (test "X$echo_test_string" = "X`eval $cmd`") 2>/dev/null
-	  then
-	    break
-	  fi
-	  prev="$cmd"
-	done
+	  for cmd in 'echo test' 'sed 2q "[$]0"' 'sed 10q "[$]0"' 'sed 20q "[$]0"' 'sed 50q "[$]0"'; do
+	    if { test "X$echo_test_string" = "X`eval $cmd`"; } 2>/dev/null
+	    then
+	      break
+	    fi
+	    prev="$cmd"
+	  done
 
-	if test "$prev" != 'sed 50q "[$]0"'; then
-	  echo_test_string=`eval $prev`
-	  export echo_test_string
-	  exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "[$]0" ${1+"[$]@"}
-	else
-	  # Oops.  We lost completely, so just stick with echo.
-	  echo=echo
-	fi
+	  if test "$prev" != 'sed 50q "[$]0"'; then
+	    echo_test_string=`eval $prev`
+	    export echo_test_string
+	    exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "[$]0" ${1+"[$]@"}
+	  else
+	    # Oops.  We lost completely, so just stick with echo.
+	    ECHO=echo
+	  fi
+        fi
       fi
     fi
   fi
 fi
-fi
 
 # Copy echo and quote the copy suitably for passing to libtool from
 # the Makefile, instead of quoting the original, which is used later.
-ECHO=$echo
-if test "X$ECHO" = "X$CONFIG_SHELL [$]0 --fallback-echo"; then
-   ECHO="$CONFIG_SHELL \\\$\[$]0 --fallback-echo"
+lt_ECHO=$ECHO
+if test "X$lt_ECHO" = "X$CONFIG_SHELL [$]0 --fallback-echo"; then
+   lt_ECHO="$CONFIG_SHELL \\\$\[$]0 --fallback-echo"
 fi
 
-AC_SUBST(ECHO)
-])])# _LT_AC_PROG_ECHO_BACKSLASH
+AC_SUBST(lt_ECHO)
+])
+_LT_DECL([], [SHELL], [1], [Shell to use when invoking shell scripts])
+_LT_DECL([], [ECHO], [1],
+    [An echo program that does not interpret backslashes])
+])# _LT_PROG_ECHO_BACKSLASH
 
 
-# _LT_AC_LOCK
-# -----------
-AC_DEFUN([_LT_AC_LOCK],
+# _LT_ENABLE_LOCK
+# ---------------
+m4_defun([_LT_ENABLE_LOCK],
 [AC_ARG_ENABLE([libtool-lock],
-    [AC_HELP_STRING([--disable-libtool-lock],
-	[avoid locking (might break parallel builds)])])
+  [AS_HELP_STRING([--disable-libtool-lock],
+    [avoid locking (might break parallel builds)])])
 test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
 
 # Some flags need to be propagated to the compiler or linker for good
@@ -576,12 +1239,12 @@
   echo 'int i;' > conftest.$ac_ext
   if AC_TRY_EVAL(ac_compile); then
     case `/usr/bin/file conftest.$ac_objext` in
-    *ELF-32*)
-      HPUX_IA64_MODE="32"
-      ;;
-    *ELF-64*)
-      HPUX_IA64_MODE="64"
-      ;;
+      *ELF-32*)
+	HPUX_IA64_MODE="32"
+	;;
+      *ELF-64*)
+	HPUX_IA64_MODE="64"
+	;;
     esac
   fi
   rm -rf conftest*
@@ -590,79 +1253,79 @@
   # Find out which ABI we are using.
   echo '[#]line __oline__ "configure"' > conftest.$ac_ext
   if AC_TRY_EVAL(ac_compile); then
-   if test "$lt_cv_prog_gnu_ld" = yes; then
-    case `/usr/bin/file conftest.$ac_objext` in
-    *32-bit*)
-      LD="${LD-ld} -melf32bsmip"
-      ;;
-    *N32*)
-      LD="${LD-ld} -melf32bmipn32"
-      ;;
-    *64-bit*)
-      LD="${LD-ld} -melf64bmip"
-      ;;
-    esac
-   else
-    case `/usr/bin/file conftest.$ac_objext` in
-    *32-bit*)
-      LD="${LD-ld} -32"
-      ;;
-    *N32*)
-      LD="${LD-ld} -n32"
-      ;;
-    *64-bit*)
-      LD="${LD-ld} -64"
-      ;;
-    esac
-   fi
+    if test "$lt_cv_prog_gnu_ld" = yes; then
+      case `/usr/bin/file conftest.$ac_objext` in
+	*32-bit*)
+	  LD="${LD-ld} -melf32bsmip"
+	  ;;
+	*N32*)
+	  LD="${LD-ld} -melf32bmipn32"
+	  ;;
+	*64-bit*)
+	  LD="${LD-ld} -melf64bmip"
+	;;
+      esac
+    else
+      case `/usr/bin/file conftest.$ac_objext` in
+	*32-bit*)
+	  LD="${LD-ld} -32"
+	  ;;
+	*N32*)
+	  LD="${LD-ld} -n32"
+	  ;;
+	*64-bit*)
+	  LD="${LD-ld} -64"
+	  ;;
+      esac
+    fi
   fi
   rm -rf conftest*
   ;;
 
 x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \
-s390*-*linux*|sparc*-*linux*)
+s390*-*linux*|s390*-*tpf*|sparc*-*linux*)
   # Find out which ABI we are using.
   echo 'int i;' > conftest.$ac_ext
   if AC_TRY_EVAL(ac_compile); then
     case `/usr/bin/file conftest.o` in
-    *32-bit*)
-      case $host in
-        x86_64-*kfreebsd*-gnu)
-          LD="${LD-ld} -m elf_i386_fbsd"
-          ;;
-        x86_64-*linux*)
-          LD="${LD-ld} -m elf_i386"
-          ;;
-        ppc64-*linux*|powerpc64-*linux*)
-          LD="${LD-ld} -m elf32ppclinux"
-          ;;
-        s390x-*linux*)
-          LD="${LD-ld} -m elf_s390"
-          ;;
-        sparc64-*linux*)
-          LD="${LD-ld} -m elf32_sparc"
-          ;;
-      esac
-      ;;
-    *64-bit*)
-      case $host in
-        x86_64-*kfreebsd*-gnu)
-          LD="${LD-ld} -m elf_x86_64_fbsd"
-          ;;
-        x86_64-*linux*)
-          LD="${LD-ld} -m elf_x86_64"
-          ;;
-        ppc*-*linux*|powerpc*-*linux*)
-          LD="${LD-ld} -m elf64ppc"
-          ;;
-        s390*-*linux*)
-          LD="${LD-ld} -m elf64_s390"
-          ;;
-        sparc*-*linux*)
-          LD="${LD-ld} -m elf64_sparc"
-          ;;
-      esac
-      ;;
+      *32-bit*)
+	case $host in
+	  x86_64-*kfreebsd*-gnu)
+	    LD="${LD-ld} -m elf_i386_fbsd"
+	    ;;
+	  x86_64-*linux*)
+	    LD="${LD-ld} -m elf_i386"
+	    ;;
+	  ppc64-*linux*|powerpc64-*linux*)
+	    LD="${LD-ld} -m elf32ppclinux"
+	    ;;
+	  s390x-*linux*)
+	    LD="${LD-ld} -m elf_s390"
+	    ;;
+	  sparc64-*linux*)
+	    LD="${LD-ld} -m elf32_sparc"
+	    ;;
+	esac
+	;;
+      *64-bit*)
+	case $host in
+	  x86_64-*kfreebsd*-gnu)
+	    LD="${LD-ld} -m elf_x86_64_fbsd"
+	    ;;
+	  x86_64-*linux*)
+	    LD="${LD-ld} -m elf_x86_64"
+	    ;;
+	  ppc*-*linux*|powerpc*-*linux*)
+	    LD="${LD-ld} -m elf64ppc"
+	    ;;
+	  s390*-*linux*|s390*-*tpf*)
+	    LD="${LD-ld} -m elf64_s390"
+	    ;;
+	  sparc*-*linux*)
+	    LD="${LD-ld} -m elf64_sparc"
+	    ;;
+	esac
+	;;
     esac
   fi
   rm -rf conftest*
@@ -674,7 +1337,7 @@
   CFLAGS="$CFLAGS -belf"
   AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf,
     [AC_LANG_PUSH(C)
-     AC_TRY_LINK([],[],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])
+     AC_LINK_IFELSE([AC_LANG_PROGRAM([[]],[[]])],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])
      AC_LANG_POP])
   if test x"$lt_cv_cc_needs_belf" != x"yes"; then
     # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
@@ -690,7 +1353,7 @@
       case $lt_cv_prog_gnu_ld in
       yes*) LD="${LD-ld} -m elf64_sparc" ;;
       *)
-        if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then
+	if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then
 	  LD="${LD-ld} -64"
 	fi
 	;;
@@ -700,30 +1363,63 @@
   fi
   rm -rf conftest*
   ;;
-
-AC_PROVIDE_IFELSE([AC_LIBTOOL_WIN32_DLL],
-[*-*-cygwin* | *-*-mingw* | *-*-pw32*)
-  AC_CHECK_TOOL(DLLTOOL, dlltool, false)
-  AC_CHECK_TOOL(AS, as, false)
-  AC_CHECK_TOOL(OBJDUMP, objdump, false)
-  ;;
-  ])
 esac
 
 need_locks="$enable_libtool_lock"
+])# _LT_ENABLE_LOCK
+
+
+# _LT_CMD_OLD_ARCHIVE
+# -------------------
+m4_defun([_LT_CMD_OLD_ARCHIVE],
+[AC_CHECK_TOOL(AR, ar, false)
+test -z "$AR" && AR=ar
+test -z "$AR_FLAGS" && AR_FLAGS=cru
+_LT_DECL([], [AR], [1], [The archiver])
+_LT_DECL([], [AR_FLAGS], [1])
+
+AC_CHECK_TOOL(STRIP, strip, :)
+test -z "$STRIP" && STRIP=:
+_LT_DECL([], [STRIP], [1], [A symbol stripping program])
 
-])# _LT_AC_LOCK
+AC_CHECK_TOOL(RANLIB, ranlib, :)
+test -z "$RANLIB" && RANLIB=:
+_LT_DECL([], [RANLIB], [1],
+    [Commands used to install an old-style archive])
+
+# Determine commands to create old-style static archives.
+old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs'
+old_postinstall_cmds='chmod 644 $oldlib'
+old_postuninstall_cmds=
+
+if test -n "$RANLIB"; then
+  case $host_os in
+  openbsd*)
+    old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$oldlib"
+    ;;
+  *)
+    old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$oldlib"
+    ;;
+  esac
+  old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib"
+fi
+_LT_DECL([], [old_postinstall_cmds], [2])
+_LT_DECL([], [old_postuninstall_cmds], [2])
+_LT_TAGDECL([], [old_archive_cmds], [2],
+    [Commands used to build an old-style archive])
+])# _LT_CMD_OLD_ARCHIVE
 
 
-# AC_LIBTOOL_COMPILER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,
+# _LT_COMPILER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,
 #		[OUTPUT-FILE], [ACTION-SUCCESS], [ACTION-FAILURE])
 # ----------------------------------------------------------------
 # Check whether the given compiler option works
-AC_DEFUN([AC_LIBTOOL_COMPILER_OPTION],
-[AC_REQUIRE([LT_AC_PROG_SED])
+AC_DEFUN([_LT_COMPILER_OPTION],
+[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+m4_require([_LT_DECL_SED])dnl
 AC_CACHE_CHECK([$1], [$2],
   [$2=no
-  ifelse([$4], , [ac_outfile=conftest.$ac_objext], [ac_outfile=$4])
+   m4_if([$4], , [ac_outfile=conftest.$ac_objext], [ac_outfile=$4])
    echo "$lt_simple_compile_test_code" > conftest.$ac_ext
    lt_compiler_flag="$3"
    # Insert the option either (1) after the last *FLAGS variable, or
@@ -743,29 +1439,35 @@
    if (exit $ac_status) && test -s "$ac_outfile"; then
      # The compiler can only warn and ignore the option if not recognized
      # So say no if there are warnings other than the usual output.
-     $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
+     $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
      $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
      if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
        $2=yes
      fi
    fi
-   $rm conftest*
+   $RM conftest*
 ])
 
 if test x"[$]$2" = xyes; then
-    ifelse([$5], , :, [$5])
+    m4_if([$5], , :, [$5])
 else
-    ifelse([$6], , :, [$6])
+    m4_if([$6], , :, [$6])
 fi
-])# AC_LIBTOOL_COMPILER_OPTION
-
+])# _LT_COMPILER_OPTION
 
-# AC_LIBTOOL_LINKER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,
-#                          [ACTION-SUCCESS], [ACTION-FAILURE])
-# ------------------------------------------------------------
-# Check whether the given compiler option works
-AC_DEFUN([AC_LIBTOOL_LINKER_OPTION],
-[AC_REQUIRE([LT_AC_PROG_SED])dnl
+# Old name:
+AU_ALIAS([AC_LIBTOOL_COMPILER_OPTION], [_LT_COMPILER_OPTION])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LIBTOOL_COMPILER_OPTION], [])
+
+
+# _LT_LINKER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,
+#                  [ACTION-SUCCESS], [ACTION-FAILURE])
+# ----------------------------------------------------
+# Check whether the given linker option works
+AC_DEFUN([_LT_LINKER_OPTION],
+[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+m4_require([_LT_DECL_SED])dnl
 AC_CACHE_CHECK([$1], [$2],
   [$2=no
    save_LDFLAGS="$LDFLAGS"
@@ -777,7 +1479,7 @@
      if test -s conftest.err; then
        # Append any errors to the config.log.
        cat conftest.err 1>&AS_MESSAGE_LOG_FD
-       $echo "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp
+       $ECHO "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp
        $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
        if diff conftest.exp conftest.er2 >/dev/null; then
          $2=yes
@@ -786,22 +1488,28 @@
        $2=yes
      fi
    fi
-   $rm -r conftest*
+   $RM -r conftest*
    LDFLAGS="$save_LDFLAGS"
 ])
 
 if test x"[$]$2" = xyes; then
-    ifelse([$4], , :, [$4])
+    m4_if([$4], , :, [$4])
 else
-    ifelse([$5], , :, [$5])
+    m4_if([$5], , :, [$5])
 fi
-])# AC_LIBTOOL_LINKER_OPTION
+])# _LT_LINKER_OPTION
 
+# Old name:
+AU_ALIAS([AC_LIBTOOL_LINKER_OPTION], [_LT_LINKER_OPTION])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LIBTOOL_LINKER_OPTION], [])
 
-# AC_LIBTOOL_SYS_MAX_CMD_LEN
-# --------------------------
-AC_DEFUN([AC_LIBTOOL_SYS_MAX_CMD_LEN],
-[# find the maximum length of command line arguments
+
+# LT_CMD_MAX_LEN
+#---------------
+AC_DEFUN([LT_CMD_MAX_LEN],
+[AC_REQUIRE([AC_CANONICAL_HOST])dnl
+# find the maximum length of command line arguments
 AC_MSG_CHECKING([the maximum length of command line arguments])
 AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl
   i=0
@@ -823,7 +1531,7 @@
     lt_cv_sys_max_cmd_len=-1;
     ;;
 
-  cygwin* | mingw*)
+  cygwin* | mingw* | cegcc*)
     # On Win9x/ME, this test blows up -- it succeeds, but takes
     # about 5 minutes as the teststring grows exponentially.
     # Worse, since 9x/ME are not pre-emptively multitasking,
@@ -878,7 +1586,7 @@
   sysv5* | sco5v6* | sysv4.2uw2*)
     kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null`
     if test -n "$kargmax"; then
-      lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[[ 	]]//'`
+      lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[[	 ]]//'`
     else
       lt_cv_sys_max_cmd_len=32768
     fi
@@ -889,20 +1597,28 @@
       lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
       lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
     else
+      # Make teststring a little bigger before we do anything with it.
+      # a 1K string should be a reasonable start.
+      for i in 1 2 3 4 5 6 7 8 ; do
+        teststring=$teststring$teststring
+      done
       SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}}
-      while (test "X"`$SHELL [$]0 --fallback-echo "X$teststring" 2>/dev/null` \
-	       = "XX$teststring") >/dev/null 2>&1 &&
-	      new_result=`expr "X$teststring" : ".*" 2>&1` &&
-	      lt_cv_sys_max_cmd_len=$new_result &&
+      # If test is not a shell built-in, we'll probably end up computing a
+      # maximum length that is only half of the actual maximum length, but
+      # we can't tell.
+      while { test "X"`$SHELL [$]0 --fallback-echo "X$teststring$teststring" 2>/dev/null` \
+	         = "XX$teststring$teststring"; } >/dev/null 2>&1 &&
 	      test $i != 17 # 1/2 MB should be enough
       do
         i=`expr $i + 1`
         teststring=$teststring$teststring
       done
+      # Only check the string length outside the loop.
+      lt_cv_sys_max_cmd_len=`expr "X$teststring" : ".*" 2>&1`
       teststring=
-      # Add a significant safety factor because C++ compilers can tack on massive
-      # amounts of additional arguments before passing them to the linker.
-      # It appears as though 1/2 is a usable value.
+      # Add a significant safety factor because C++ compilers can tack on
+      # massive amounts of additional arguments before passing them to the
+      # linker.  It appears as though 1/2 is a usable value.
       lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2`
     fi
     ;;
@@ -913,27 +1629,35 @@
 else
   AC_MSG_RESULT(none)
 fi
-])# AC_LIBTOOL_SYS_MAX_CMD_LEN
+max_cmd_len=$lt_cv_sys_max_cmd_len
+_LT_DECL([], [max_cmd_len], [0],
+    [What is the maximum length of a command?])
+])# LT_CMD_MAX_LEN
 
+# Old name:
+AU_ALIAS([AC_LIBTOOL_SYS_MAX_CMD_LEN], [LT_CMD_MAX_LEN])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LIBTOOL_SYS_MAX_CMD_LEN], [])
 
-# _LT_AC_CHECK_DLFCN
-# ------------------
-AC_DEFUN([_LT_AC_CHECK_DLFCN],
-[AC_CHECK_HEADERS(dlfcn.h)dnl
-])# _LT_AC_CHECK_DLFCN
+
+# _LT_HEADER_DLFCN
+# ----------------
+m4_defun([_LT_HEADER_DLFCN],
+[AC_CHECK_HEADERS([dlfcn.h], [], [], [AC_INCLUDES_DEFAULT])dnl
+])# _LT_HEADER_DLFCN
 
 
-# _LT_AC_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE,
-#                           ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING)
-# ---------------------------------------------------------------------
-AC_DEFUN([_LT_AC_TRY_DLOPEN_SELF],
-[AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl
+# _LT_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE,
+#                      ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING)
+# ----------------------------------------------------------------
+m4_defun([_LT_TRY_DLOPEN_SELF],
+[m4_require([_LT_HEADER_DLFCN])dnl
 if test "$cross_compiling" = yes; then :
   [$4]
 else
   lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
   lt_status=$lt_dlunknown
-  cat > conftest.$ac_ext <<EOF
+  cat > conftest.$ac_ext <<_LT_EOF
 [#line __oline__ "configure"
 #include "confdefs.h"
 
@@ -975,10 +1699,6 @@
 #  endif
 #endif
 
-#ifdef __cplusplus
-extern "C" void exit (int);
-#endif
-
 void fnord() { int i=42;}
 int main ()
 {
@@ -994,9 +1714,9 @@
   else
     puts (dlerror ());
 
-    exit (status);
+  return status;
 }]
-EOF
+_LT_EOF
   if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext} 2>/dev/null; then
     (./conftest; exit; ) >&AS_MESSAGE_LOG_FD 2>/dev/null
     lt_status=$?
@@ -1011,13 +1731,13 @@
   fi
 fi
 rm -fr conftest*
-])# _LT_AC_TRY_DLOPEN_SELF
+])# _LT_TRY_DLOPEN_SELF
 
 
-# AC_LIBTOOL_DLOPEN_SELF
-# ----------------------
-AC_DEFUN([AC_LIBTOOL_DLOPEN_SELF],
-[AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl
+# LT_SYS_DLOPEN_SELF
+# ------------------
+AC_DEFUN([LT_SYS_DLOPEN_SELF],
+[m4_require([_LT_HEADER_DLFCN])dnl
 if test "x$enable_dlopen" != xyes; then
   enable_dlopen=unknown
   enable_dlopen_self=unknown
@@ -1033,15 +1753,15 @@
     lt_cv_dlopen_self=yes
     ;;
 
-  mingw* | pw32*)
+  mingw* | pw32* | cegcc*)
     lt_cv_dlopen="LoadLibrary"
     lt_cv_dlopen_libs=
-   ;;
+    ;;
 
   cygwin*)
     lt_cv_dlopen="dlopen"
     lt_cv_dlopen_libs=
-   ;;
+    ;;
 
   darwin*)
   # if libdl is installed we need to link against it
@@ -1051,7 +1771,7 @@
     lt_cv_dlopen_libs=
     lt_cv_dlopen_self=yes
     ])
-   ;;
+    ;;
 
   *)
     AC_CHECK_FUNC([shl_load],
@@ -1093,7 +1813,7 @@
 
     AC_CACHE_CHECK([whether a program can dlopen itself],
 	  lt_cv_dlopen_self, [dnl
-	  _LT_AC_TRY_DLOPEN_SELF(
+	  _LT_TRY_DLOPEN_SELF(
 	    lt_cv_dlopen_self=yes, lt_cv_dlopen_self=yes,
 	    lt_cv_dlopen_self=no, lt_cv_dlopen_self=cross)
     ])
@@ -1101,8 +1821,8 @@
     if test "x$lt_cv_dlopen_self" = xyes; then
       wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\"
       AC_CACHE_CHECK([whether a statically linked program can dlopen itself],
-    	  lt_cv_dlopen_self_static, [dnl
-	  _LT_AC_TRY_DLOPEN_SELF(
+	  lt_cv_dlopen_self_static, [dnl
+	  _LT_TRY_DLOPEN_SELF(
 	    lt_cv_dlopen_self_static=yes, lt_cv_dlopen_self_static=yes,
 	    lt_cv_dlopen_self_static=no,  lt_cv_dlopen_self_static=cross)
       ])
@@ -1124,19 +1844,32 @@
   *) enable_dlopen_self_static=unknown ;;
   esac
 fi
-])# AC_LIBTOOL_DLOPEN_SELF
+_LT_DECL([dlopen_support], [enable_dlopen], [0],
+	 [Whether dlopen is supported])
+_LT_DECL([dlopen_self], [enable_dlopen_self], [0],
+	 [Whether dlopen of programs is supported])
+_LT_DECL([dlopen_self_static], [enable_dlopen_self_static], [0],
+	 [Whether dlopen of statically linked programs is supported])
+])# LT_SYS_DLOPEN_SELF
+
+# Old name:
+AU_ALIAS([AC_LIBTOOL_DLOPEN_SELF], [LT_SYS_DLOPEN_SELF])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LIBTOOL_DLOPEN_SELF], [])
 
 
-# AC_LIBTOOL_PROG_CC_C_O([TAGNAME])
-# ---------------------------------
-# Check to see if options -c and -o are simultaneously supported by compiler
-AC_DEFUN([AC_LIBTOOL_PROG_CC_C_O],
-[AC_REQUIRE([LT_AC_PROG_SED])dnl
-AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl
+# _LT_COMPILER_C_O([TAGNAME])
+# ---------------------------
+# Check to see if options -c and -o are simultaneously supported by compiler.
+# This macro does not hard code the compiler like AC_PROG_CC_C_O.
+m4_defun([_LT_COMPILER_C_O],
+[m4_require([_LT_DECL_SED])dnl
+m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+m4_require([_LT_TAG_COMPILER])dnl
 AC_CACHE_CHECK([if $compiler supports -c -o file.$ac_objext],
-  [_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)],
-  [_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=no
-   $rm -r conftest 2>/dev/null
+  [_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)],
+  [_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=no
+   $RM -r conftest 2>/dev/null
    mkdir conftest
    cd conftest
    mkdir out
@@ -1160,37 +1893,41 @@
    then
      # The compiler can only warn and ignore the option if not recognized
      # So say no if there are warnings
-     $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
+     $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
      $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
      if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
-       _LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
+       _LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
      fi
    fi
    chmod u+w . 2>&AS_MESSAGE_LOG_FD
-   $rm conftest*
+   $RM conftest*
    # SGI C++ compiler will create directory out/ii_files/ for
    # template instantiation
-   test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files
-   $rm out/* && rmdir out
+   test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files
+   $RM out/* && rmdir out
    cd ..
-   rmdir conftest
-   $rm conftest*
+   $RM -r conftest
+   $RM conftest*
 ])
-])# AC_LIBTOOL_PROG_CC_C_O
+_LT_TAGDECL([compiler_c_o], [lt_cv_prog_compiler_c_o], [1],
+	[Does compiler simultaneously support -c and -o options?])
+])# _LT_COMPILER_C_O
 
 
-# AC_LIBTOOL_SYS_HARD_LINK_LOCKS([TAGNAME])
-# -----------------------------------------
+# _LT_COMPILER_FILE_LOCKS([TAGNAME])
+# ----------------------------------
 # Check to see if we can do hard links to lock some files if needed
-AC_DEFUN([AC_LIBTOOL_SYS_HARD_LINK_LOCKS],
-[AC_REQUIRE([_LT_AC_LOCK])dnl
+m4_defun([_LT_COMPILER_FILE_LOCKS],
+[m4_require([_LT_ENABLE_LOCK])dnl
+m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+_LT_COMPILER_C_O([$1])
 
 hard_links="nottested"
-if test "$_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)" = no && test "$need_locks" != no; then
+if test "$_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)" = no && test "$need_locks" != no; then
   # do not overwrite the value of need_locks provided by the user
   AC_MSG_CHECKING([if we can lock with hard links])
   hard_links=yes
-  $rm conftest*
+  $RM conftest*
   ln conftest.a conftest.b 2>/dev/null && hard_links=no
   touch conftest.a
   ln conftest.a conftest.b 2>&5 || hard_links=no
@@ -1203,12 +1940,13 @@
 else
   need_locks=no
 fi
-])# AC_LIBTOOL_SYS_HARD_LINK_LOCKS
+_LT_DECL([], [need_locks], [1], [Must we lock files when doing compilation?])
+])# _LT_COMPILER_FILE_LOCKS
 
 
-# AC_LIBTOOL_OBJDIR
-# -----------------
-AC_DEFUN([AC_LIBTOOL_OBJDIR],
+# _LT_CHECK_OBJDIR
+# ----------------
+m4_defun([_LT_CHECK_OBJDIR],
 [AC_CACHE_CHECK([for objdir], [lt_cv_objdir],
 [rm -f .libs 2>/dev/null
 mkdir .libs 2>/dev/null
@@ -1220,40 +1958,46 @@
 fi
 rmdir .libs 2>/dev/null])
 objdir=$lt_cv_objdir
-])# AC_LIBTOOL_OBJDIR
+_LT_DECL([], [objdir], [0],
+         [The name of the directory that contains temporary libtool files])dnl
+m4_pattern_allow([LT_OBJDIR])dnl
+AC_DEFINE_UNQUOTED(LT_OBJDIR, "$lt_cv_objdir/",
+  [Define to the sub-directory in which libtool stores uninstalled libraries.])
+])# _LT_CHECK_OBJDIR
 
 
-# AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH([TAGNAME])
-# ----------------------------------------------
+# _LT_LINKER_HARDCODE_LIBPATH([TAGNAME])
+# --------------------------------------
 # Check hardcoding attributes.
-AC_DEFUN([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH],
+m4_defun([_LT_LINKER_HARDCODE_LIBPATH],
 [AC_MSG_CHECKING([how to hardcode library paths into programs])
-_LT_AC_TAGVAR(hardcode_action, $1)=
-if test -n "$_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)" || \
-   test -n "$_LT_AC_TAGVAR(runpath_var, $1)" || \
-   test "X$_LT_AC_TAGVAR(hardcode_automatic, $1)" = "Xyes" ; then
+_LT_TAGVAR(hardcode_action, $1)=
+if test -n "$_LT_TAGVAR(hardcode_libdir_flag_spec, $1)" ||
+   test -n "$_LT_TAGVAR(runpath_var, $1)" ||
+   test "X$_LT_TAGVAR(hardcode_automatic, $1)" = "Xyes" ; then
 
-  # We can hardcode non-existant directories.
-  if test "$_LT_AC_TAGVAR(hardcode_direct, $1)" != no &&
+  # We can hardcode non-existent directories.
+  if test "$_LT_TAGVAR(hardcode_direct, $1)" != no &&
      # If the only mechanism to avoid hardcoding is shlibpath_var, we
      # have to relink, otherwise we might link with an installed library
      # when we should be linking with a yet-to-be-installed one
-     ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)" != no &&
-     test "$_LT_AC_TAGVAR(hardcode_minus_L, $1)" != no; then
+     ## test "$_LT_TAGVAR(hardcode_shlibpath_var, $1)" != no &&
+     test "$_LT_TAGVAR(hardcode_minus_L, $1)" != no; then
     # Linking always hardcodes the temporary library directory.
-    _LT_AC_TAGVAR(hardcode_action, $1)=relink
+    _LT_TAGVAR(hardcode_action, $1)=relink
   else
     # We can link without hardcoding, and we can hardcode nonexisting dirs.
-    _LT_AC_TAGVAR(hardcode_action, $1)=immediate
+    _LT_TAGVAR(hardcode_action, $1)=immediate
   fi
 else
   # We cannot hardcode anything, or else we can only hardcode existing
   # directories.
-  _LT_AC_TAGVAR(hardcode_action, $1)=unsupported
+  _LT_TAGVAR(hardcode_action, $1)=unsupported
 fi
-AC_MSG_RESULT([$_LT_AC_TAGVAR(hardcode_action, $1)])
+AC_MSG_RESULT([$_LT_TAGVAR(hardcode_action, $1)])
 
-if test "$_LT_AC_TAGVAR(hardcode_action, $1)" = relink; then
+if test "$_LT_TAGVAR(hardcode_action, $1)" = relink ||
+   test "$_LT_TAGVAR(inherit_rpath, $1)" = yes; then
   # Fast installation is not supported
   enable_fast_install=no
 elif test "$shlibpath_overrides_runpath" = yes ||
@@ -1261,73 +2005,70 @@
   # Fast installation is not necessary
   enable_fast_install=needless
 fi
-])# AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH
+_LT_TAGDECL([], [hardcode_action], [0],
+    [How to hardcode a shared library path into an executable])
+])# _LT_LINKER_HARDCODE_LIBPATH
 
 
-# AC_LIBTOOL_SYS_LIB_STRIP
-# ------------------------
-AC_DEFUN([AC_LIBTOOL_SYS_LIB_STRIP],
-[striplib=
+# _LT_CMD_STRIPLIB
+# ----------------
+m4_defun([_LT_CMD_STRIPLIB],
+[m4_require([_LT_DECL_EGREP])
+striplib=
 old_striplib=
 AC_MSG_CHECKING([whether stripping libraries is possible])
-if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then
+if test -n "$STRIP" && $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then
   test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
   test -z "$striplib" && striplib="$STRIP --strip-unneeded"
   AC_MSG_RESULT([yes])
 else
 # FIXME - insert some real tests, host_os isn't really good enough
   case $host_os in
-   darwin*)
-       if test -n "$STRIP" ; then
-         striplib="$STRIP -x"
-         old_striplib="$STRIP -S"
-         AC_MSG_RESULT([yes])
-       else
-  AC_MSG_RESULT([no])
-fi
-       ;;
-   *)
-  AC_MSG_RESULT([no])
+  darwin*)
+    if test -n "$STRIP" ; then
+      striplib="$STRIP -x"
+      old_striplib="$STRIP -S"
+      AC_MSG_RESULT([yes])
+    else
+      AC_MSG_RESULT([no])
+    fi
+    ;;
+  *)
+    AC_MSG_RESULT([no])
     ;;
   esac
 fi
-])# AC_LIBTOOL_SYS_LIB_STRIP
+_LT_DECL([], [old_striplib], [1], [Commands to strip libraries])
+_LT_DECL([], [striplib], [1])
+])# _LT_CMD_STRIPLIB
 
 
-# AC_LIBTOOL_SYS_DYNAMIC_LINKER
+# _LT_SYS_DYNAMIC_LINKER([TAG])
 # -----------------------------
 # PORTME Fill in your ld.so characteristics
-AC_DEFUN([AC_LIBTOOL_SYS_DYNAMIC_LINKER],
-[AC_REQUIRE([LT_AC_PROG_SED])dnl
+m4_defun([_LT_SYS_DYNAMIC_LINKER],
+[AC_REQUIRE([AC_CANONICAL_HOST])dnl
+m4_require([_LT_DECL_EGREP])dnl
+m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+m4_require([_LT_DECL_OBJDUMP])dnl
+m4_require([_LT_DECL_SED])dnl
 AC_MSG_CHECKING([dynamic linker characteristics])
-library_names_spec=
-libname_spec='lib$name'
-soname_spec=
-shrext_cmds=".so"
-postinstall_cmds=
-postuninstall_cmds=
-finish_cmds=
-finish_eval=
-shlibpath_var=
-shlibpath_overrides_runpath=unknown
-version_type=none
-dynamic_linker="$host_os ld.so"
-sys_lib_dlsearch_path_spec="/lib /usr/lib"
-m4_if($1,[],[
+m4_if([$1],
+	[], [
 if test "$GCC" = yes; then
   case $host_os in
     darwin*) lt_awk_arg="/^libraries:/,/LR/" ;;
     *) lt_awk_arg="/^libraries:/" ;;
   esac
   lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e "s,=/,/,g"`
-  if echo "$lt_search_path_spec" | grep ';' >/dev/null ; then
+  if $ECHO "$lt_search_path_spec" | $GREP ';' >/dev/null ; then
     # if the path contains ";" then we assume it to be the separator
     # otherwise default to the standard path separator (i.e. ":") - it is
     # assumed that no part of a normal pathname contains ";" but that should
     # okay in the real world where ";" in dirpaths is itself problematic.
-    lt_search_path_spec=`echo "$lt_search_path_spec" | $SED -e 's/;/ /g'`
+    lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED -e 's/;/ /g'`
   else
-    lt_search_path_spec=`echo "$lt_search_path_spec" | $SED  -e "s/$PATH_SEPARATOR/ /g"`
+    lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED  -e "s/$PATH_SEPARATOR/ /g"`
   fi
   # Ok, now we have the path, separated by spaces, we can step through it
   # and add multilib dir if necessary.
@@ -1341,7 +2082,7 @@
 	lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path"
     fi
   done
-  lt_search_path_spec=`echo $lt_tmp_lt_search_path_spec | awk '
+  lt_search_path_spec=`$ECHO $lt_tmp_lt_search_path_spec | awk '
 BEGIN {RS=" "; FS="/|\n";} {
   lt_foo="";
   lt_count=0;
@@ -1361,10 +2102,23 @@
   if (lt_foo != "") { lt_freq[[lt_foo]]++; }
   if (lt_freq[[lt_foo]] == 1) { print lt_foo; }
 }'`
-  sys_lib_search_path_spec=`echo $lt_search_path_spec`
+  sys_lib_search_path_spec=`$ECHO $lt_search_path_spec`
 else
   sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
 fi])
+library_names_spec=
+libname_spec='lib$name'
+soname_spec=
+shrext_cmds=".so"
+postinstall_cmds=
+postuninstall_cmds=
+finish_cmds=
+finish_eval=
+shlibpath_var=
+shlibpath_overrides_runpath=unknown
+version_type=none
+dynamic_linker="$host_os ld.so"
+sys_lib_dlsearch_path_spec="/lib /usr/lib"
 need_lib_prefix=unknown
 hardcode_into_libs=no
 
@@ -1401,7 +2155,7 @@
       aix4 | aix4.[[01]] | aix4.[[01]].*)
       if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
 	   echo ' yes '
-	   echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then
+	   echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then
 	:
       else
 	can_build_shared=no
@@ -1427,9 +2181,18 @@
   ;;
 
 amigaos*)
-  library_names_spec='$libname.ixlibrary $libname.a'
-  # Create ${libname}_ixlibrary.a entries in /sys/libs.
-  finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
+  case $host_cpu in
+  powerpc)
+    # Since July 2007 AmigaOS4 officially supports .so libraries.
+    # When compiling the executable, add -use-dynld -Lsobjs: to the compileline.
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    ;;
+  m68k)
+    library_names_spec='$libname.ixlibrary $libname.a'
+    # Create ${libname}_ixlibrary.a entries in /sys/libs.
+    finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$ECHO "X$lib" | $Xsed -e '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
+    ;;
+  esac
   ;;
 
 beos*)
@@ -1452,25 +2215,28 @@
   # libtool to hard-code these into programs
   ;;
 
-cygwin* | mingw* | pw32*)
+cygwin* | mingw* | pw32* | cegcc*)
   version_type=windows
   shrext_cmds=".dll"
   need_version=no
   need_lib_prefix=no
 
   case $GCC,$host_os in
-  yes,cygwin* | yes,mingw* | yes,pw32*)
+  yes,cygwin* | yes,mingw* | yes,pw32* | yes,cegcc*)
     library_names_spec='$libname.dll.a'
     # DLL is installed to $(libdir)/../bin by postinstall_cmds
     postinstall_cmds='base_file=`basename \${file}`~
-      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~
+      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
       dldir=$destdir/`dirname \$dlpath`~
       test -d \$dldir || mkdir -p \$dldir~
       $install_prog $dir/$dlname \$dldir/$dlname~
-      chmod a+x \$dldir/$dlname'
+      chmod a+x \$dldir/$dlname~
+      if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then
+        eval '\''$striplib \$dldir/$dlname'\'' || exit \$?;
+      fi'
     postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
       dlpath=$dir/\$dldll~
-       $rm \$dlpath'
+       $RM \$dlpath'
     shlibpath_overrides_runpath=yes
 
     case $host_os in
@@ -1479,20 +2245,20 @@
       soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
       sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib"
       ;;
-    mingw*)
+    mingw* | cegcc*)
       # MinGW DLLs use traditional 'lib' prefix
       soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
-      sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
-      if echo "$sys_lib_search_path_spec" | [grep ';[c-zC-Z]:/' >/dev/null]; then
+      sys_lib_search_path_spec=`$CC -print-search-dirs | $GREP "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
+      if $ECHO "$sys_lib_search_path_spec" | [$GREP ';[c-zC-Z]:/' >/dev/null]; then
         # It is most probably a Windows format PATH printed by
         # mingw gcc, but we are running on Cygwin. Gcc prints its search
         # path with ; separators, and with drive letters. We can handle the
         # drive letters (cygwin fileutils understands them), so leave them,
         # especially as we might pass files found there to a mingw objdump,
         # which wouldn't understand a cygwinified path. Ahh.
-        sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
+        sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
       else
-        sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED  -e "s/$PATH_SEPARATOR/ /g"`
+        sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED  -e "s/$PATH_SEPARATOR/ /g"`
       fi
       ;;
     pw32*)
@@ -1516,13 +2282,13 @@
   version_type=darwin
   need_lib_prefix=no
   need_version=no
-  library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext'
+  library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext'
   soname_spec='${libname}${release}${major}$shared_ext'
   shlibpath_overrides_runpath=yes
   shlibpath_var=DYLD_LIBRARY_PATH
   shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
-  m4_if([$1], [],[
-  sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib"]) 
+m4_if([$1], [],[
+  sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib"])
   sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
   ;;
 
@@ -1615,18 +2381,18 @@
     fi
     sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
     ;;
-   hppa*64*)
-     shrext_cmds='.sl'
-     hardcode_into_libs=yes
-     dynamic_linker="$host_os dld.sl"
-     shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
-     shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
-     library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-     soname_spec='${libname}${release}${shared_ext}$major'
-     sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
-     sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
-     ;;
-   *)
+  hppa*64*)
+    shrext_cmds='.sl'
+    hardcode_into_libs=yes
+    dynamic_linker="$host_os dld.sl"
+    shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
+    shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    soname_spec='${libname}${release}${shared_ext}$major'
+    sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
+    sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+    ;;
+  *)
     shrext_cmds='.sl'
     dynamic_linker="$host_os dld.sl"
     shlibpath_var=SHLIB_PATH
@@ -1703,33 +2469,26 @@
   finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
   shlibpath_var=LD_LIBRARY_PATH
   shlibpath_overrides_runpath=no
+  # Some binutils ld are patched to set DT_RUNPATH
+  save_LDFLAGS=$LDFLAGS
+  save_libdir=$libdir
+  eval "libdir=/foo; wl=\"$_LT_TAGVAR(lt_prog_compiler_wl, $1)\"; \
+       LDFLAGS=\"\$LDFLAGS $_LT_TAGVAR(hardcode_libdir_flag_spec, $1)\""
+  AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])],
+    [AS_IF([ ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null],
+       [shlibpath_overrides_runpath=yes])])
+  LDFLAGS=$save_LDFLAGS
+  libdir=$save_libdir
+
   # This implies no fast_install, which is unacceptable.
   # Some rework will be needed to allow for fast_install
   # before this can be enabled.
   hardcode_into_libs=yes
 
-  # find out which ABI we are using
-  libsuff=
-  case "$host_cpu" in
-  x86_64*|s390x*|powerpc64*)
-    echo '[#]line __oline__ "configure"' > conftest.$ac_ext
-    if AC_TRY_EVAL(ac_compile); then
-      case `/usr/bin/file conftest.$ac_objext` in
-      *64-bit*)
-        libsuff=64
-        ;;
-      esac
-    fi
-    rm -rf conftest*
-    ;;
-  esac
-
-  sys_lib_dlsearch_path_spec="/lib${libsuff} /usr/lib${libsuff}"
-
   # Append ld.so.conf contents to the search path
   if test -f /etc/ld.so.conf; then
-    lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ 	]*hwcap[ 	]/d;s/[:,	]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
-    sys_lib_dlsearch_path_spec="$sys_lib_dlsearch_path_spec $lt_ld_extra"
+    lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[	 ]*hwcap[	 ]/d;s/[:,	]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
+    sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
   fi
 
   # We used to test for /lib/ld.so.1 and disable shared libraries on
@@ -1741,11 +2500,23 @@
   dynamic_linker='GNU/Linux ld.so'
   ;;
 
+netbsdelf*-gnu)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  dynamic_linker='NetBSD ld.elf_so'
+  ;;
+
 netbsd*)
   version_type=sunos
   need_lib_prefix=no
   need_version=no
-  if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
+  if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
     library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
     finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
     dynamic_linker='NetBSD (a.out) ld.so'
@@ -1766,14 +2537,16 @@
   shlibpath_overrides_runpath=yes
   ;;
 
-nto-qnx*)
-  version_type=linux
+*nto* | *qnx*)
+  version_type=qnx
   need_lib_prefix=no
   need_version=no
   library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
   soname_spec='${libname}${release}${shared_ext}$major'
   shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  dynamic_linker='ldqnx.so'
   ;;
 
 openbsd*)
@@ -1782,13 +2555,13 @@
   need_lib_prefix=no
   # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
   case $host_os in
-    openbsd3.3 | openbsd3.3.*) need_version=yes ;;
-    *)                         need_version=no  ;;
+    openbsd3.3 | openbsd3.3.*)	need_version=yes ;;
+    *)				need_version=no  ;;
   esac
   library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
   finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
   shlibpath_var=LD_LIBRARY_PATH
-  if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+  if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
     case $host_os in
       openbsd2.[[89]] | openbsd2.[[89]].*)
 	shlibpath_overrides_runpath=no
@@ -1860,7 +2633,6 @@
     sni)
       shlibpath_overrides_runpath=no
       need_lib_prefix=no
-      export_dynamic_flag_spec='${wl}-Blargedynsym'
       runpath_var=LD_RUN_PATH
       ;;
     siemens)
@@ -1891,13 +2663,12 @@
   library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
   soname_spec='${libname}${release}${shared_ext}$major'
   shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
   hardcode_into_libs=yes
   if test "$with_gnu_ld" = yes; then
     sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
-    shlibpath_overrides_runpath=no
   else
     sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
-    shlibpath_overrides_runpath=yes
     case $host_os in
       sco3.2v5*)
         sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
@@ -1907,7 +2678,18 @@
   sys_lib_dlsearch_path_spec='/usr/lib'
   ;;
 
-uts4*)
+tpf*)
+  # TPF is a cross-target only.  Preferred cross-host = GNU/Linux.
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  ;;
+
+uts4*)
   version_type=linux
   library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
   soname_spec='${libname}${release}${shared_ext}$major'
@@ -1921,288 +2703,58 @@
 AC_MSG_RESULT([$dynamic_linker])
 test "$dynamic_linker" = no && can_build_shared=no
 
-AC_CACHE_VAL([lt_cv_sys_lib_search_path_spec],
-[lt_cv_sys_lib_search_path_spec="$sys_lib_search_path_spec"])
-sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec"
-AC_CACHE_VAL([lt_cv_sys_lib_dlsearch_path_spec],
-[lt_cv_sys_lib_dlsearch_path_spec="$sys_lib_dlsearch_path_spec"])
-sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec"
-
 variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
 if test "$GCC" = yes; then
   variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
 fi
-])# AC_LIBTOOL_SYS_DYNAMIC_LINKER
-
-
-# _LT_AC_TAGCONFIG
-# ----------------
-AC_DEFUN([_LT_AC_TAGCONFIG],
-[AC_REQUIRE([LT_AC_PROG_SED])dnl
-AC_ARG_WITH([tags],
-    [AC_HELP_STRING([--with-tags@<:@=TAGS@:>@],
-        [include additional configurations @<:@automatic@:>@])],
-    [tagnames="$withval"])
-
-if test -f "$ltmain" && test -n "$tagnames"; then
-  if test ! -f "${ofile}"; then
-    AC_MSG_WARN([output file `$ofile' does not exist])
-  fi
-
-  if test -z "$LTCC"; then
-    eval "`$SHELL ${ofile} --config | grep '^LTCC='`"
-    if test -z "$LTCC"; then
-      AC_MSG_WARN([output file `$ofile' does not look like a libtool script])
-    else
-      AC_MSG_WARN([using `LTCC=$LTCC', extracted from `$ofile'])
-    fi
-  fi
-  if test -z "$LTCFLAGS"; then
-    eval "`$SHELL ${ofile} --config | grep '^LTCFLAGS='`"
-  fi
-
-  # Extract list of available tagged configurations in $ofile.
-  # Note that this assumes the entire list is on one line.
-  available_tags=`grep "^available_tags=" "${ofile}" | $SED -e 's/available_tags=\(.*$\)/\1/' -e 's/\"//g'`
-
-  lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
-  for tagname in $tagnames; do
-    IFS="$lt_save_ifs"
-    # Check whether tagname contains only valid characters
-    case `$echo "X$tagname" | $Xsed -e 's:[[-_ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz1234567890,/]]::g'` in
-    "") ;;
-    *)  AC_MSG_ERROR([invalid tag name: $tagname])
-	;;
-    esac
-
-    if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "${ofile}" > /dev/null
-    then
-      AC_MSG_ERROR([tag name \"$tagname\" already exists])
-    fi
-
-    # Update the list of available tags.
-    if test -n "$tagname"; then
-      echo appending configuration tag \"$tagname\" to $ofile
-
-      case $tagname in
-      CXX)
-	if test -n "$CXX" && ( test "X$CXX" != "Xno" &&
-	    ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) ||
-	    (test "X$CXX" != "Xg++"))) ; then
-	  AC_LIBTOOL_LANG_CXX_CONFIG
-	else
-	  tagname=""
-	fi
-	;;
-
-      F77)
-	if test -n "$F77" && test "X$F77" != "Xno"; then
-	  AC_LIBTOOL_LANG_F77_CONFIG
-	else
-	  tagname=""
-	fi
-	;;
-
-      GCJ)
-	if test -n "$GCJ" && test "X$GCJ" != "Xno"; then
-	  AC_LIBTOOL_LANG_GCJ_CONFIG
-	else
-	  tagname=""
-	fi
-	;;
-
-      RC)
-	AC_LIBTOOL_LANG_RC_CONFIG
-	;;
-
-      *)
-	AC_MSG_ERROR([Unsupported tag name: $tagname])
-	;;
-      esac
-
-      # Append the new tag name to the list of available tags.
-      if test -n "$tagname" ; then
-      available_tags="$available_tags $tagname"
-    fi
-    fi
-  done
-  IFS="$lt_save_ifs"
 
-  # Now substitute the updated list of available tags.
-  if eval "sed -e 's/^available_tags=.*\$/available_tags=\"$available_tags\"/' \"$ofile\" > \"${ofile}T\""; then
-    mv "${ofile}T" "$ofile"
-    chmod +x "$ofile"
-  else
-    rm -f "${ofile}T"
-    AC_MSG_ERROR([unable to update list of available tagged configurations.])
-  fi
+if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then
+  sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec"
+fi
+if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then
+  sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec"
 fi
-])# _LT_AC_TAGCONFIG
-
-
-# AC_LIBTOOL_DLOPEN
-# -----------------
-# enable checks for dlopen support
-AC_DEFUN([AC_LIBTOOL_DLOPEN],
- [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])
-])# AC_LIBTOOL_DLOPEN
-
-
-# AC_LIBTOOL_WIN32_DLL
-# --------------------
-# declare package support for building win32 DLLs
-AC_DEFUN([AC_LIBTOOL_WIN32_DLL],
-[AC_BEFORE([$0], [AC_LIBTOOL_SETUP])
-])# AC_LIBTOOL_WIN32_DLL
-
-
-# AC_ENABLE_SHARED([DEFAULT])
-# ---------------------------
-# implement the --enable-shared flag
-# DEFAULT is either `yes' or `no'.  If omitted, it defaults to `yes'.
-AC_DEFUN([AC_ENABLE_SHARED],
-[define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl
-AC_ARG_ENABLE([shared],
-    [AC_HELP_STRING([--enable-shared@<:@=PKGS@:>@],
-	[build shared libraries @<:@default=]AC_ENABLE_SHARED_DEFAULT[@:>@])],
-    [p=${PACKAGE-default}
-    case $enableval in
-    yes) enable_shared=yes ;;
-    no) enable_shared=no ;;
-    *)
-      enable_shared=no
-      # Look at the argument we got.  We use all the common list separators.
-      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
-      for pkg in $enableval; do
-	IFS="$lt_save_ifs"
-	if test "X$pkg" = "X$p"; then
-	  enable_shared=yes
-	fi
-      done
-      IFS="$lt_save_ifs"
-      ;;
-    esac],
-    [enable_shared=]AC_ENABLE_SHARED_DEFAULT)
-])# AC_ENABLE_SHARED
-
-
-# AC_DISABLE_SHARED
-# -----------------
-# set the default shared flag to --disable-shared
-AC_DEFUN([AC_DISABLE_SHARED],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-AC_ENABLE_SHARED(no)
-])# AC_DISABLE_SHARED
-
-
-# AC_ENABLE_STATIC([DEFAULT])
-# ---------------------------
-# implement the --enable-static flag
-# DEFAULT is either `yes' or `no'.  If omitted, it defaults to `yes'.
-AC_DEFUN([AC_ENABLE_STATIC],
-[define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl
-AC_ARG_ENABLE([static],
-    [AC_HELP_STRING([--enable-static@<:@=PKGS@:>@],
-	[build static libraries @<:@default=]AC_ENABLE_STATIC_DEFAULT[@:>@])],
-    [p=${PACKAGE-default}
-    case $enableval in
-    yes) enable_static=yes ;;
-    no) enable_static=no ;;
-    *)
-     enable_static=no
-      # Look at the argument we got.  We use all the common list separators.
-      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
-      for pkg in $enableval; do
-	IFS="$lt_save_ifs"
-	if test "X$pkg" = "X$p"; then
-	  enable_static=yes
-	fi
-      done
-      IFS="$lt_save_ifs"
-      ;;
-    esac],
-    [enable_static=]AC_ENABLE_STATIC_DEFAULT)
-])# AC_ENABLE_STATIC
-
-
-# AC_DISABLE_STATIC
-# -----------------
-# set the default static flag to --disable-static
-AC_DEFUN([AC_DISABLE_STATIC],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-AC_ENABLE_STATIC(no)
-])# AC_DISABLE_STATIC
-
-
-# AC_ENABLE_FAST_INSTALL([DEFAULT])
-# ---------------------------------
-# implement the --enable-fast-install flag
-# DEFAULT is either `yes' or `no'.  If omitted, it defaults to `yes'.
-AC_DEFUN([AC_ENABLE_FAST_INSTALL],
-[define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl
-AC_ARG_ENABLE([fast-install],
-    [AC_HELP_STRING([--enable-fast-install@<:@=PKGS@:>@],
-    [optimize for fast installation @<:@default=]AC_ENABLE_FAST_INSTALL_DEFAULT[@:>@])],
-    [p=${PACKAGE-default}
-    case $enableval in
-    yes) enable_fast_install=yes ;;
-    no) enable_fast_install=no ;;
-    *)
-      enable_fast_install=no
-      # Look at the argument we got.  We use all the common list separators.
-      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
-      for pkg in $enableval; do
-	IFS="$lt_save_ifs"
-	if test "X$pkg" = "X$p"; then
-	  enable_fast_install=yes
-	fi
-      done
-      IFS="$lt_save_ifs"
-      ;;
-    esac],
-    [enable_fast_install=]AC_ENABLE_FAST_INSTALL_DEFAULT)
-])# AC_ENABLE_FAST_INSTALL
-
 
-# AC_DISABLE_FAST_INSTALL
-# -----------------------
-# set the default to --disable-fast-install
-AC_DEFUN([AC_DISABLE_FAST_INSTALL],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-AC_ENABLE_FAST_INSTALL(no)
-])# AC_DISABLE_FAST_INSTALL
+_LT_DECL([], [variables_saved_for_relink], [1],
+    [Variables whose values should be saved in libtool wrapper scripts and
+    restored at link time])
+_LT_DECL([], [need_lib_prefix], [0],
+    [Do we need the "lib" prefix for modules?])
+_LT_DECL([], [need_version], [0], [Do we need a version for libraries?])
+_LT_DECL([], [version_type], [0], [Library versioning type])
+_LT_DECL([], [runpath_var], [0],  [Shared library runtime path variable])
+_LT_DECL([], [shlibpath_var], [0],[Shared library path variable])
+_LT_DECL([], [shlibpath_overrides_runpath], [0],
+    [Is shlibpath searched before the hard-coded library search path?])
+_LT_DECL([], [libname_spec], [1], [Format of library name prefix])
+_LT_DECL([], [library_names_spec], [1],
+    [[List of archive names.  First name is the real one, the rest are links.
+    The last name is the one that the linker finds with -lNAME]])
+_LT_DECL([], [soname_spec], [1],
+    [[The coded name of the library, if different from the real name]])
+_LT_DECL([], [postinstall_cmds], [2],
+    [Command to use after installation of a shared archive])
+_LT_DECL([], [postuninstall_cmds], [2],
+    [Command to use after uninstallation of a shared archive])
+_LT_DECL([], [finish_cmds], [2],
+    [Commands used to finish a libtool library installation in a directory])
+_LT_DECL([], [finish_eval], [1],
+    [[As "finish_cmds", except a single script fragment to be evaled but
+    not shown]])
+_LT_DECL([], [hardcode_into_libs], [0],
+    [Whether we should hardcode library paths into libraries])
+_LT_DECL([], [sys_lib_search_path_spec], [2],
+    [Compile-time system search path for libraries])
+_LT_DECL([], [sys_lib_dlsearch_path_spec], [2],
+    [Run-time system search path for libraries])
+])# _LT_SYS_DYNAMIC_LINKER
 
 
-# AC_LIBTOOL_PICMODE([MODE])
+# _LT_PATH_TOOL_PREFIX(TOOL)
 # --------------------------
-# implement the --with-pic flag
-# MODE is either `yes' or `no'.  If omitted, it defaults to `both'.
-AC_DEFUN([AC_LIBTOOL_PICMODE],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-pic_mode=ifelse($#,1,$1,default)
-])# AC_LIBTOOL_PICMODE
-
-
-# AC_PROG_EGREP
-# -------------
-# This is predefined starting with Autoconf 2.54, so this conditional
-# definition can be removed once we require Autoconf 2.54 or later.
-m4_ifndef([AC_PROG_EGREP], [AC_DEFUN([AC_PROG_EGREP],
-[AC_CACHE_CHECK([for egrep], [ac_cv_prog_egrep],
-   [if echo a | (grep -E '(a|b)') >/dev/null 2>&1
-    then ac_cv_prog_egrep='grep -E'
-    else ac_cv_prog_egrep='egrep'
-    fi])
- EGREP=$ac_cv_prog_egrep
- AC_SUBST([EGREP])
-])])
-
-
-# AC_PATH_TOOL_PREFIX
-# -------------------
 # find a file program which can recognize shared library
-AC_DEFUN([AC_PATH_TOOL_PREFIX],
-[AC_REQUIRE([AC_PROG_EGREP])dnl
+AC_DEFUN([_LT_PATH_TOOL_PREFIX],
+[m4_require([_LT_DECL_EGREP])dnl
 AC_MSG_CHECKING([for $1])
 AC_CACHE_VAL(lt_cv_path_MAGIC_CMD,
 [case $MAGIC_CMD in
@@ -2215,7 +2767,7 @@
 dnl $ac_dummy forces splitting on constant user-supplied paths.
 dnl POSIX.2 word splitting is done only on the output of word expansions,
 dnl not every word.  This closes a longstanding sh security hole.
-  ac_dummy="ifelse([$2], , $PATH, [$2])"
+  ac_dummy="m4_if([$2], , $PATH, [$2])"
   for ac_dir in $ac_dummy; do
     IFS="$lt_save_ifs"
     test -z "$ac_dir" && ac_dir=.
@@ -2230,7 +2782,7 @@
 	    $EGREP "$file_magic_regex" > /dev/null; then
 	    :
 	  else
-	    cat <<EOF 1>&2
+	    cat <<_LT_EOF 1>&2
 
 *** Warning: the command libtool uses to detect shared libraries,
 *** $file_magic_cmd, produces output that libtool cannot recognize.
@@ -2241,7 +2793,7 @@
 *** may want to report the problem to your system manager and/or to
 *** bug-libtool@gnu.org
 
-EOF
+_LT_EOF
 	  fi ;;
 	esac
       fi
@@ -2258,37 +2810,47 @@
 else
   AC_MSG_RESULT(no)
 fi
-])# AC_PATH_TOOL_PREFIX
+_LT_DECL([], [MAGIC_CMD], [0],
+	 [Used to examine libraries when file_magic_cmd begins with "file"])dnl
+])# _LT_PATH_TOOL_PREFIX
 
+# Old name:
+AU_ALIAS([AC_PATH_TOOL_PREFIX], [_LT_PATH_TOOL_PREFIX])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_PATH_TOOL_PREFIX], [])
 
-# AC_PATH_MAGIC
-# -------------
+
+# _LT_PATH_MAGIC
+# --------------
 # find a file program which can recognize a shared library
-AC_DEFUN([AC_PATH_MAGIC],
-[AC_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin$PATH_SEPARATOR$PATH)
+m4_defun([_LT_PATH_MAGIC],
+[_LT_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin$PATH_SEPARATOR$PATH)
 if test -z "$lt_cv_path_MAGIC_CMD"; then
   if test -n "$ac_tool_prefix"; then
-    AC_PATH_TOOL_PREFIX(file, /usr/bin$PATH_SEPARATOR$PATH)
+    _LT_PATH_TOOL_PREFIX(file, /usr/bin$PATH_SEPARATOR$PATH)
   else
     MAGIC_CMD=:
   fi
 fi
-])# AC_PATH_MAGIC
+])# _LT_PATH_MAGIC
 
 
-# AC_PROG_LD
+# LT_PATH_LD
 # ----------
 # find the pathname to the GNU or non-GNU linker
-AC_DEFUN([AC_PROG_LD],
-[AC_ARG_WITH([gnu-ld],
-    [AC_HELP_STRING([--with-gnu-ld],
-	[assume the C compiler uses GNU ld @<:@default=no@:>@])],
-    [test "$withval" = no || with_gnu_ld=yes],
-    [with_gnu_ld=no])
-AC_REQUIRE([LT_AC_PROG_SED])dnl
-AC_REQUIRE([AC_PROG_CC])dnl
+AC_DEFUN([LT_PATH_LD],
+[AC_REQUIRE([AC_PROG_CC])dnl
 AC_REQUIRE([AC_CANONICAL_HOST])dnl
 AC_REQUIRE([AC_CANONICAL_BUILD])dnl
+m4_require([_LT_DECL_SED])dnl
+m4_require([_LT_DECL_EGREP])dnl
+
+AC_ARG_WITH([gnu-ld],
+    [AS_HELP_STRING([--with-gnu-ld],
+	[assume the C compiler uses GNU ld @<:@default=no@:>@])],
+    [test "$withval" = no || with_gnu_ld=yes],
+    [with_gnu_ld=no])dnl
+
 ac_prog=ld
 if test "$GCC" = yes; then
   # Check if gcc -print-prog-name=ld gives a path.
@@ -2305,9 +2867,9 @@
     [[\\/]]* | ?:[[\\/]]*)
       re_direlt='/[[^/]][[^/]]*/\.\./'
       # Canonicalize the pathname of ld
-      ac_prog=`echo $ac_prog| $SED 's%\\\\%/%g'`
-      while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
-	ac_prog=`echo $ac_prog| $SED "s%$re_direlt%/%"`
+      ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'`
+      while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do
+	ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"`
       done
       test -z "$LD" && LD="$ac_prog"
       ;;
@@ -2357,15 +2919,24 @@
   AC_MSG_RESULT(no)
 fi
 test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
-AC_PROG_LD_GNU
-])# AC_PROG_LD
+_LT_PATH_LD_GNU
+AC_SUBST([LD])
 
+_LT_TAGDECL([], [LD], [1], [The linker used to build libraries])
+])# LT_PATH_LD
 
-# AC_PROG_LD_GNU
-# --------------
-AC_DEFUN([AC_PROG_LD_GNU],
-[AC_REQUIRE([AC_PROG_EGREP])dnl
-AC_CACHE_CHECK([if the linker ($LD) is GNU ld], lt_cv_prog_gnu_ld,
+# Old names:
+AU_ALIAS([AM_PROG_LD], [LT_PATH_LD])
+AU_ALIAS([AC_PROG_LD], [LT_PATH_LD])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AM_PROG_LD], [])
+dnl AC_DEFUN([AC_PROG_LD], [])
+
+
+# _LT_PATH_LD_GNU
+#- --------------
+m4_defun([_LT_PATH_LD_GNU],
+[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], lt_cv_prog_gnu_ld,
 [# I'd rather use --version here, but apparently some GNU lds only accept -v.
 case `$LD -v 2>&1 </dev/null` in
 *GNU* | *'with BFD'*)
@@ -2376,14 +2947,14 @@
   ;;
 esac])
 with_gnu_ld=$lt_cv_prog_gnu_ld
-])# AC_PROG_LD_GNU
+])# _LT_PATH_LD_GNU
 
 
-# AC_PROG_LD_RELOAD_FLAG
-# ----------------------
+# _LT_CMD_RELOAD
+# --------------
 # find reload flag for linker
 #   -- PORTME Some linkers may need a different reload flag.
-AC_DEFUN([AC_PROG_LD_RELOAD_FLAG],
+m4_defun([_LT_CMD_RELOAD],
 [AC_CACHE_CHECK([for $LD option to reload object files],
   lt_cv_ld_reload_flag,
   [lt_cv_ld_reload_flag='-r'])
@@ -2402,15 +2973,19 @@
     fi
     ;;
 esac
-])# AC_PROG_LD_RELOAD_FLAG
+_LT_DECL([], [reload_flag], [1], [How to create reloadable object files])dnl
+_LT_DECL([], [reload_cmds], [2])dnl
+])# _LT_CMD_RELOAD
 
 
-# AC_DEPLIBS_CHECK_METHOD
-# -----------------------
+# _LT_CHECK_MAGIC_METHOD
+# ----------------------
 # how to check for library dependencies
 #  -- PORTME fill in with the dynamic library characteristics
-AC_DEFUN([AC_DEPLIBS_CHECK_METHOD],
-[AC_CACHE_CHECK([how to recognize dependent libraries],
+m4_defun([_LT_CHECK_MAGIC_METHOD],
+[m4_require([_LT_DECL_EGREP])
+m4_require([_LT_DECL_OBJDUMP])
+AC_CACHE_CHECK([how to recognize dependent libraries],
 lt_cv_deplibs_check_method,
 [lt_cv_file_magic_cmd='$MAGIC_CMD'
 lt_cv_file_magic_test_file=
@@ -2460,12 +3035,18 @@
   fi
   ;;
 
+cegcc)
+  # use the weaker test based on 'objdump'. See mingw*.
+  lt_cv_deplibs_check_method='file_magic file format pe-arm-.*little(.*architecture: arm)?'
+  lt_cv_file_magic_cmd='$OBJDUMP -f'
+  ;;
+
 darwin* | rhapsody*)
   lt_cv_deplibs_check_method=pass_all
   ;;
 
 freebsd* | dragonfly*)
-  if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
+  if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
     case $host_cpu in
     i*86 )
       # Not sure whether the presence of OpenBSD here was a mistake.
@@ -2522,8 +3103,8 @@
   lt_cv_deplibs_check_method=pass_all
   ;;
 
-netbsd*)
-  if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
+netbsd* | netbsdelf*-gnu)
+  if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
     lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$'
   else
     lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|_pic\.a)$'
@@ -2536,12 +3117,12 @@
   lt_cv_file_magic_test_file=/usr/lib/libnls.so
   ;;
 
-nto-qnx*)
-  lt_cv_deplibs_check_method=unknown
+*nto* | *qnx*)
+  lt_cv_deplibs_check_method=pass_all
   ;;
 
 openbsd*)
-  if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+  if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
     lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|\.so|_pic\.a)$'
   else
     lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$'
@@ -2560,6 +3141,10 @@
   lt_cv_deplibs_check_method=pass_all
   ;;
 
+sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
 sysv4 | sysv4.3*)
   case $host_vendor in
   motorola)
@@ -2587,7 +3172,7 @@
   esac
   ;;
 
-sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
+tpf*)
   lt_cv_deplibs_check_method=pass_all
   ;;
 esac
@@ -2595,14 +3180,20 @@
 file_magic_cmd=$lt_cv_file_magic_cmd
 deplibs_check_method=$lt_cv_deplibs_check_method
 test -z "$deplibs_check_method" && deplibs_check_method=unknown
-])# AC_DEPLIBS_CHECK_METHOD
 
+_LT_DECL([], [deplibs_check_method], [1],
+    [Method to check whether dependent libraries are shared objects])
+_LT_DECL([], [file_magic_cmd], [1],
+    [Command to use when deplibs_check_method == "file_magic"])
+])# _LT_CHECK_MAGIC_METHOD
 
-# AC_PROG_NM
+
+# LT_PATH_NM
 # ----------
-# find the pathname to a BSD-compatible name lister
-AC_DEFUN([AC_PROG_NM],
-[AC_CACHE_CHECK([for BSD-compatible nm], lt_cv_path_NM,
+# find the pathname to a BSD- or MS-compatible name lister
+AC_DEFUN([LT_PATH_NM],
+[AC_REQUIRE([AC_PROG_CC])dnl
+AC_CACHE_CHECK([for BSD- or MS-compatible name lister (nm)], lt_cv_path_NM,
 [if test -n "$NM"; then
   # Let the user override the test.
   lt_cv_path_NM="$NM"
@@ -2644,16 +3235,51 @@
     done
     IFS="$lt_save_ifs"
   done
-  test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm
+  : ${lt_cv_path_NM=no}
 fi])
-NM="$lt_cv_path_NM"
-])# AC_PROG_NM
+if test "$lt_cv_path_NM" != "no"; then
+  NM="$lt_cv_path_NM"
+else
+  # Didn't find any BSD compatible name lister, look for dumpbin.
+  AC_CHECK_TOOLS(DUMPBIN, ["dumpbin -symbols" "link -dump -symbols"], :)
+  AC_SUBST([DUMPBIN])
+  if test "$DUMPBIN" != ":"; then
+    NM="$DUMPBIN"
+  fi
+fi
+test -z "$NM" && NM=nm
+AC_SUBST([NM])
+_LT_DECL([], [NM], [1], [A BSD- or MS-compatible name lister])dnl
 
+AC_CACHE_CHECK([the name lister ($NM) interface], [lt_cv_nm_interface],
+  [lt_cv_nm_interface="BSD nm"
+  echo "int some_variable = 0;" > conftest.$ac_ext
+  (eval echo "\"\$as_me:__oline__: $ac_compile\"" >&AS_MESSAGE_LOG_FD)
+  (eval "$ac_compile" 2>conftest.err)
+  cat conftest.err >&AS_MESSAGE_LOG_FD
+  (eval echo "\"\$as_me:__oline__: $NM \\\"conftest.$ac_objext\\\"\"" >&AS_MESSAGE_LOG_FD)
+  (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out)
+  cat conftest.err >&AS_MESSAGE_LOG_FD
+  (eval echo "\"\$as_me:__oline__: output\"" >&AS_MESSAGE_LOG_FD)
+  cat conftest.out >&AS_MESSAGE_LOG_FD
+  if $GREP 'External.*some_variable' conftest.out > /dev/null; then
+    lt_cv_nm_interface="MS dumpbin"
+  fi
+  rm -f conftest*])
+])# LT_PATH_NM
+
+# Old names:
+AU_ALIAS([AM_PROG_NM], [LT_PATH_NM])
+AU_ALIAS([AC_PROG_NM], [LT_PATH_NM])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AM_PROG_NM], [])
+dnl AC_DEFUN([AC_PROG_NM], [])
 
-# AC_CHECK_LIBM
-# -------------
+
+# LT_LIB_M
+# --------
 # check for math library
-AC_DEFUN([AC_CHECK_LIBM],
+AC_DEFUN([LT_LIB_M],
 [AC_REQUIRE([AC_CANONICAL_HOST])dnl
 LIBM=
 case $host in
@@ -2668,4017 +3294,4697 @@
   AC_CHECK_LIB(m, cos, LIBM="-lm")
   ;;
 esac
-])# AC_CHECK_LIBM
-
-
-# AC_LIBLTDL_CONVENIENCE([DIRECTORY])
-# -----------------------------------
-# sets LIBLTDL to the link flags for the libltdl convenience library and
-# LTDLINCL to the include flags for the libltdl header and adds
-# --enable-ltdl-convenience to the configure arguments.  Note that
-# AC_CONFIG_SUBDIRS is not called here.  If DIRECTORY is not provided,
-# it is assumed to be `libltdl'.  LIBLTDL will be prefixed with
-# '${top_builddir}/' and LTDLINCL will be prefixed with '${top_srcdir}/'
-# (note the single quotes!).  If your package is not flat and you're not
-# using automake, define top_builddir and top_srcdir appropriately in
-# the Makefiles.
-AC_DEFUN([AC_LIBLTDL_CONVENIENCE],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-  case $enable_ltdl_convenience in
-  no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;;
-  "") enable_ltdl_convenience=yes
-      ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;;
-  esac
-  LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdlc.la
-  LTDLINCL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl'])
-  # For backwards non-gettext consistent compatibility...
-  INCLTDL="$LTDLINCL"
-])# AC_LIBLTDL_CONVENIENCE
-
+AC_SUBST([LIBM])
+])# LT_LIB_M
 
-# AC_LIBLTDL_INSTALLABLE([DIRECTORY])
-# -----------------------------------
-# sets LIBLTDL to the link flags for the libltdl installable library and
-# LTDLINCL to the include flags for the libltdl header and adds
-# --enable-ltdl-install to the configure arguments.  Note that
-# AC_CONFIG_SUBDIRS is not called here.  If DIRECTORY is not provided,
-# and an installed libltdl is not found, it is assumed to be `libltdl'.
-# LIBLTDL will be prefixed with '${top_builddir}/'# and LTDLINCL with
-# '${top_srcdir}/' (note the single quotes!).  If your package is not
-# flat and you're not using automake, define top_builddir and top_srcdir
-# appropriately in the Makefiles.
-# In the future, this macro may have to be called after AC_PROG_LIBTOOL.
-AC_DEFUN([AC_LIBLTDL_INSTALLABLE],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-  AC_CHECK_LIB(ltdl, lt_dlinit,
-  [test x"$enable_ltdl_install" != xyes && enable_ltdl_install=no],
-  [if test x"$enable_ltdl_install" = xno; then
-     AC_MSG_WARN([libltdl not installed, but installation disabled])
-   else
-     enable_ltdl_install=yes
-   fi
-  ])
-  if test x"$enable_ltdl_install" = x"yes"; then
-    ac_configure_args="$ac_configure_args --enable-ltdl-install"
-    LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdl.la
-    LTDLINCL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl'])
-  else
-    ac_configure_args="$ac_configure_args --enable-ltdl-install=no"
-    LIBLTDL="-lltdl"
-    LTDLINCL=
-  fi
-  # For backwards non-gettext consistent compatibility...
-  INCLTDL="$LTDLINCL"
-])# AC_LIBLTDL_INSTALLABLE
+# Old name:
+AU_ALIAS([AC_CHECK_LIBM], [LT_LIB_M])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_CHECK_LIBM], [])
 
 
-# AC_LIBTOOL_CXX
-# --------------
-# enable support for C++ libraries
-AC_DEFUN([AC_LIBTOOL_CXX],
-[AC_REQUIRE([_LT_AC_LANG_CXX])
-])# AC_LIBTOOL_CXX
+# _LT_COMPILER_NO_RTTI([TAGNAME])
+# -------------------------------
+m4_defun([_LT_COMPILER_NO_RTTI],
+[m4_require([_LT_TAG_COMPILER])dnl
 
+_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=
 
-# _LT_AC_LANG_CXX
-# ---------------
-AC_DEFUN([_LT_AC_LANG_CXX],
-[AC_REQUIRE([AC_PROG_CXX])
-AC_REQUIRE([_LT_AC_PROG_CXXCPP])
-_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}CXX])
-])# _LT_AC_LANG_CXX
+if test "$GCC" = yes; then
+  _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin'
 
-# _LT_AC_PROG_CXXCPP
-# ------------------
-AC_DEFUN([_LT_AC_PROG_CXXCPP],
-[
-AC_REQUIRE([AC_PROG_CXX])
-if test -n "$CXX" && ( test "X$CXX" != "Xno" &&
-    ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) ||
-    (test "X$CXX" != "Xg++"))) ; then
-  AC_PROG_CXXCPP
+  _LT_COMPILER_OPTION([if $compiler supports -fno-rtti -fno-exceptions],
+    lt_cv_prog_compiler_rtti_exceptions,
+    [-fno-rtti -fno-exceptions], [],
+    [_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)="$_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) -fno-rtti -fno-exceptions"])
 fi
-])# _LT_AC_PROG_CXXCPP
+_LT_TAGDECL([no_builtin_flag], [lt_prog_compiler_no_builtin_flag], [1],
+	[Compiler flag to turn off builtin functions])
+])# _LT_COMPILER_NO_RTTI
 
-# AC_LIBTOOL_F77
-# --------------
-# enable support for Fortran 77 libraries
-AC_DEFUN([AC_LIBTOOL_F77],
-[AC_REQUIRE([_LT_AC_LANG_F77])
-])# AC_LIBTOOL_F77
 
+# _LT_CMD_GLOBAL_SYMBOLS
+# ----------------------
+m4_defun([_LT_CMD_GLOBAL_SYMBOLS],
+[AC_REQUIRE([AC_CANONICAL_HOST])dnl
+AC_REQUIRE([AC_PROG_CC])dnl
+AC_REQUIRE([LT_PATH_NM])dnl
+AC_REQUIRE([LT_PATH_LD])dnl
+m4_require([_LT_DECL_SED])dnl
+m4_require([_LT_DECL_EGREP])dnl
+m4_require([_LT_TAG_COMPILER])dnl
 
-# _LT_AC_LANG_F77
-# ---------------
-AC_DEFUN([_LT_AC_LANG_F77],
-[AC_REQUIRE([AC_PROG_F77])
-_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}F77])
-])# _LT_AC_LANG_F77
+# Check for command to grab the raw symbol name followed by C symbol from nm.
+AC_MSG_CHECKING([command to parse $NM output from $compiler object])
+AC_CACHE_VAL([lt_cv_sys_global_symbol_pipe],
+[
+# These are sane defaults that work on at least a few old systems.
+# [They come from Ultrix.  What could be older than Ultrix?!! ;)]
 
+# Character class describing NM global symbol codes.
+symcode='[[BCDEGRST]]'
 
-# AC_LIBTOOL_GCJ
-# --------------
-# enable support for GCJ libraries
-AC_DEFUN([AC_LIBTOOL_GCJ],
-[AC_REQUIRE([_LT_AC_LANG_GCJ])
-])# AC_LIBTOOL_GCJ
+# Regexp to match symbols that can be accessed directly from C.
+sympat='\([[_A-Za-z]][[_A-Za-z0-9]]*\)'
 
+# Define system-specific variables.
+case $host_os in
+aix*)
+  symcode='[[BCDT]]'
+  ;;
+cygwin* | mingw* | pw32* | cegcc*)
+  symcode='[[ABCDGISTW]]'
+  ;;
+hpux*)
+  if test "$host_cpu" = ia64; then
+    symcode='[[ABCDEGRST]]'
+  fi
+  ;;
+irix* | nonstopux*)
+  symcode='[[BCDEGRST]]'
+  ;;
+osf*)
+  symcode='[[BCDEGQRST]]'
+  ;;
+solaris*)
+  symcode='[[BDRT]]'
+  ;;
+sco3.2v5*)
+  symcode='[[DT]]'
+  ;;
+sysv4.2uw2*)
+  symcode='[[DT]]'
+  ;;
+sysv5* | sco5v6* | unixware* | OpenUNIX*)
+  symcode='[[ABDT]]'
+  ;;
+sysv4)
+  symcode='[[DFNSTU]]'
+  ;;
+esac
 
-# _LT_AC_LANG_GCJ
-# ---------------
-AC_DEFUN([_LT_AC_LANG_GCJ],
-[AC_PROVIDE_IFELSE([AC_PROG_GCJ],[],
-  [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],[],
-    [AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ],[],
-      [ifdef([AC_PROG_GCJ],[AC_REQUIRE([AC_PROG_GCJ])],
-	 [ifdef([A][M_PROG_GCJ],[AC_REQUIRE([A][M_PROG_GCJ])],
-	   [AC_REQUIRE([A][C_PROG_GCJ_OR_A][M_PROG_GCJ])])])])])])
-_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}GCJ])
-])# _LT_AC_LANG_GCJ
+# If we're using GNU nm, then use its standard symbol codes.
+case `$NM -V 2>&1` in
+*GNU* | *'with BFD'*)
+  symcode='[[ABCDGIRSTW]]' ;;
+esac
 
+# Transform an extracted symbol line into a proper C declaration.
+# Some systems (esp. on ia64) link data and code symbols differently,
+# so use this general approach.
+lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
 
-# AC_LIBTOOL_RC
-# -------------
-# enable support for Windows resource files
-AC_DEFUN([AC_LIBTOOL_RC],
-[AC_REQUIRE([LT_AC_PROG_RC])
-_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}RC])
-])# AC_LIBTOOL_RC
+# Transform an extracted symbol line into symbol name and symbol address
+lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/  {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/  {\"\2\", (void *) \&\2},/p'"
+lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([[^ ]]*\) $/  {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \(lib[[^ ]]*\)$/  {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/  {\"lib\2\", (void *) \&\2},/p'"
 
-
-# AC_LIBTOOL_LANG_C_CONFIG
-# ------------------------
-# Ensure that the configuration vars for the C compiler are
-# suitably defined.  Those variables are subsequently used by
-# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
-AC_DEFUN([AC_LIBTOOL_LANG_C_CONFIG], [_LT_AC_LANG_C_CONFIG])
-AC_DEFUN([_LT_AC_LANG_C_CONFIG],
-[lt_save_CC="$CC"
-AC_LANG_PUSH(C)
-
-# Source file extension for C test sources.
-ac_ext=c
-
-# Object file extension for compiled C test sources.
-objext=o
-_LT_AC_TAGVAR(objext, $1)=$objext
-
-# Code to be used in simple compile tests
-lt_simple_compile_test_code="int some_variable = 0;"
-
-# Code to be used in simple link tests
-lt_simple_link_test_code='int main(){return(0);}'
-
-_LT_AC_SYS_COMPILER
-
-# save warnings/boilerplate of simple test code
-_LT_COMPILER_BOILERPLATE
-_LT_LINKER_BOILERPLATE
-
-AC_LIBTOOL_PROG_COMPILER_NO_RTTI($1)
-AC_LIBTOOL_PROG_COMPILER_PIC($1)
-AC_LIBTOOL_PROG_CC_C_O($1)
-AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1)
-AC_LIBTOOL_PROG_LD_SHLIBS($1)
-AC_LIBTOOL_SYS_DYNAMIC_LINKER($1)
-AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1)
-AC_LIBTOOL_SYS_LIB_STRIP
-AC_LIBTOOL_DLOPEN_SELF
-
-# Report which library types will actually be built
-AC_MSG_CHECKING([if libtool supports shared libraries])
-AC_MSG_RESULT([$can_build_shared])
-
-AC_MSG_CHECKING([whether to build shared libraries])
-test "$can_build_shared" = "no" && enable_shared=no
-
-# On AIX, shared libraries and static libraries use the same namespace, and
-# are all built from PIC.
-case $host_os in
-aix3*)
-  test "$enable_shared" = yes && enable_static=no
-  if test -n "$RANLIB"; then
-    archive_cmds="$archive_cmds~\$RANLIB \$lib"
-    postinstall_cmds='$RANLIB $lib'
-  fi
+# Handle CRLF in mingw tool chain
+opt_cr=
+case $build_os in
+mingw*)
+  opt_cr=`$ECHO 'x\{0,1\}' | tr x '\015'` # option cr in regexp
   ;;
-
-aix[[4-9]]*)
-  if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
-    test "$enable_shared" = yes && enable_static=no
-  fi
-    ;;
 esac
-AC_MSG_RESULT([$enable_shared])
-
-AC_MSG_CHECKING([whether to build static libraries])
-# Make sure either enable_shared or enable_static is yes.
-test "$enable_shared" = yes || enable_static=yes
-AC_MSG_RESULT([$enable_static])
-
-AC_LIBTOOL_CONFIG($1)
-
-AC_LANG_POP
-CC="$lt_save_CC"
-])# AC_LIBTOOL_LANG_C_CONFIG
-
-
-# AC_LIBTOOL_LANG_CXX_CONFIG
-# --------------------------
-# Ensure that the configuration vars for the C compiler are
-# suitably defined.  Those variables are subsequently used by
-# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
-AC_DEFUN([AC_LIBTOOL_LANG_CXX_CONFIG], [_LT_AC_LANG_CXX_CONFIG(CXX)])
-AC_DEFUN([_LT_AC_LANG_CXX_CONFIG],
-[AC_LANG_PUSH(C++)
-AC_REQUIRE([AC_PROG_CXX])
-AC_REQUIRE([_LT_AC_PROG_CXXCPP])
-
-_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-_LT_AC_TAGVAR(allow_undefined_flag, $1)=
-_LT_AC_TAGVAR(always_export_symbols, $1)=no
-_LT_AC_TAGVAR(archive_expsym_cmds, $1)=
-_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=
-_LT_AC_TAGVAR(hardcode_direct, $1)=no
-_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=
-_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
-_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
-_LT_AC_TAGVAR(hardcode_minus_L, $1)=no
-_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
-_LT_AC_TAGVAR(hardcode_automatic, $1)=no
-_LT_AC_TAGVAR(module_cmds, $1)=
-_LT_AC_TAGVAR(module_expsym_cmds, $1)=
-_LT_AC_TAGVAR(link_all_deplibs, $1)=unknown
-_LT_AC_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
-_LT_AC_TAGVAR(no_undefined_flag, $1)=
-_LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
-_LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=no
-
-# Dependencies to place before and after the object being linked:
-_LT_AC_TAGVAR(predep_objects, $1)=
-_LT_AC_TAGVAR(postdep_objects, $1)=
-_LT_AC_TAGVAR(predeps, $1)=
-_LT_AC_TAGVAR(postdeps, $1)=
-_LT_AC_TAGVAR(compiler_lib_search_path, $1)=
-_LT_AC_TAGVAR(compiler_lib_search_dirs, $1)=
-
-# Source file extension for C++ test sources.
-ac_ext=cpp
 
-# Object file extension for compiled C++ test sources.
-objext=o
-_LT_AC_TAGVAR(objext, $1)=$objext
-
-# Code to be used in simple compile tests
-lt_simple_compile_test_code="int some_variable = 0;"
+# Try without a prefix underscore, then with it.
+for ac_symprfx in "" "_"; do
 
-# Code to be used in simple link tests
-lt_simple_link_test_code='int main(int, char *[[]]) { return(0); }'
+  # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol.
+  symxfrm="\\1 $ac_symprfx\\2 \\2"
 
-# ltmain only uses $CC for tagged configurations so make sure $CC is set.
-_LT_AC_SYS_COMPILER
+  # Write the raw and C identifiers.
+  if test "$lt_cv_nm_interface" = "MS dumpbin"; then
+    # Fake it for dumpbin and say T for any non-static function
+    # and D for any global variable.
+    # Also find C++ and __fastcall symbols from MSVC++,
+    # which start with @ or ?.
+    lt_cv_sys_global_symbol_pipe="$AWK ['"\
+"     {last_section=section; section=\$ 3};"\
+"     /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\
+"     \$ 0!~/External *\|/{next};"\
+"     / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\
+"     {if(hide[section]) next};"\
+"     {f=0}; \$ 0~/\(\).*\|/{f=1}; {printf f ? \"T \" : \"D \"};"\
+"     {split(\$ 0, a, /\||\r/); split(a[2], s)};"\
+"     s[1]~/^[@?]/{print s[1], s[1]; next};"\
+"     s[1]~prfx {split(s[1],t,\"@\"); print t[1], substr(t[1],length(prfx))}"\
+"     ' prfx=^$ac_symprfx]"
+  else
+    lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[	 ]]\($symcode$symcode*\)[[	 ]][[	 ]]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'"
+  fi
 
-# save warnings/boilerplate of simple test code
-_LT_COMPILER_BOILERPLATE
-_LT_LINKER_BOILERPLATE
+  # Check to see that the pipe works correctly.
+  pipe_works=no
 
-# Allow CC to be a program name with arguments.
-lt_save_CC=$CC
-lt_save_LD=$LD
-lt_save_GCC=$GCC
-GCC=$GXX
-lt_save_with_gnu_ld=$with_gnu_ld
-lt_save_path_LD=$lt_cv_path_LD
-if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then
-  lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx
-else
-  $as_unset lt_cv_prog_gnu_ld
-fi
-if test -n "${lt_cv_path_LDCXX+set}"; then
-  lt_cv_path_LD=$lt_cv_path_LDCXX
-else
-  $as_unset lt_cv_path_LD
-fi
-test -z "${LDCXX+set}" || LD=$LDCXX
-CC=${CXX-"c++"}
-compiler=$CC
-_LT_AC_TAGVAR(compiler, $1)=$CC
-_LT_CC_BASENAME([$compiler])
+  rm -f conftest*
+  cat > conftest.$ac_ext <<_LT_EOF
+#ifdef __cplusplus
+extern "C" {
+#endif
+char nm_test_var;
+void nm_test_func(void);
+void nm_test_func(void){}
+#ifdef __cplusplus
+}
+#endif
+int main(){nm_test_var='a';nm_test_func();return(0);}
+_LT_EOF
 
-# We don't want -fno-exception wen compiling C++ code, so set the
-# no_builtin_flag separately
-if test "$GXX" = yes; then
-  _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin'
-else
-  _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=
-fi
+  if AC_TRY_EVAL(ac_compile); then
+    # Now try to grab the symbols.
+    nlist=conftest.nm
+    if AC_TRY_EVAL(NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) && test -s "$nlist"; then
+      # Try sorting and uniquifying the output.
+      if sort "$nlist" | uniq > "$nlist"T; then
+	mv -f "$nlist"T "$nlist"
+      else
+	rm -f "$nlist"T
+      fi
 
-if test "$GXX" = yes; then
-  # Set up default GNU C++ configuration
+      # Make sure that we snagged all the symbols we need.
+      if $GREP ' nm_test_var$' "$nlist" >/dev/null; then
+	if $GREP ' nm_test_func$' "$nlist" >/dev/null; then
+	  cat <<_LT_EOF > conftest.$ac_ext
+#ifdef __cplusplus
+extern "C" {
+#endif
 
-  AC_PROG_LD
+_LT_EOF
+	  # Now generate the symbol file.
+	  eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | $GREP -v main >> conftest.$ac_ext'
 
-  # Check if GNU C++ uses GNU ld as the underlying linker, since the
-  # archiving commands below assume that GNU ld is being used.
-  if test "$with_gnu_ld" = yes; then
-    _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
-    _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+	  cat <<_LT_EOF >> conftest.$ac_ext
 
-    _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir'
-    _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+/* The mapping between symbol names and symbols.  */
+const struct {
+  const char *name;
+  void       *address;
+}
+lt__PROGRAM__LTX_preloaded_symbols[[]] =
+{
+  { "@PROGRAM@", (void *) 0 },
+_LT_EOF
+	  $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/  {\"\2\", (void *) \&\2},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext
+	  cat <<\_LT_EOF >> conftest.$ac_ext
+  {0, (void *) 0}
+};
 
-    # If archive_cmds runs LD, not CC, wlarc should be empty
-    # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to
-    #     investigate it a little bit more. (MM)
-    wlarc='${wl}'
+/* This works around a problem in FreeBSD linker */
+#ifdef FREEBSD_WORKAROUND
+static const void *lt_preloaded_setup() {
+  return lt__PROGRAM__LTX_preloaded_symbols;
+}
+#endif
 
-    # ancient GNU ld didn't support --whole-archive et. al.
-    if eval "`$CC -print-prog-name=ld` --help 2>&1" | \
-	grep 'no-whole-archive' > /dev/null; then
-      _LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+#ifdef __cplusplus
+}
+#endif
+_LT_EOF
+	  # Now try linking the two files.
+	  mv conftest.$ac_objext conftstm.$ac_objext
+	  lt_save_LIBS="$LIBS"
+	  lt_save_CFLAGS="$CFLAGS"
+	  LIBS="conftstm.$ac_objext"
+	  CFLAGS="$CFLAGS$_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)"
+	  if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext}; then
+	    pipe_works=yes
+	  fi
+	  LIBS="$lt_save_LIBS"
+	  CFLAGS="$lt_save_CFLAGS"
+	else
+	  echo "cannot find nm_test_func in $nlist" >&AS_MESSAGE_LOG_FD
+	fi
+      else
+	echo "cannot find nm_test_var in $nlist" >&AS_MESSAGE_LOG_FD
+      fi
     else
-      _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
+      echo "cannot run $lt_cv_sys_global_symbol_pipe" >&AS_MESSAGE_LOG_FD
     fi
   else
-    with_gnu_ld=no
-    wlarc=
-
-    # A generic and very simple default shared library creation
-    # command for GNU C++ for the case where it uses the native
-    # linker, instead of GNU ld.  If possible, this setting should
-    # overridden to take advantage of the native linker features on
-    # the platform it is being used on.
-    _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
+    echo "$progname: failed program was:" >&AS_MESSAGE_LOG_FD
+    cat conftest.$ac_ext >&5
   fi
+  rm -rf conftest* conftst*
 
-  # Commands to make compiler produce verbose output that lists
-  # what "hidden" libraries, object files and flags are used when
-  # linking a shared library.
-  output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"'
-
+  # Do not use the global_symbol_pipe unless it works.
+  if test "$pipe_works" = yes; then
+    break
+  else
+    lt_cv_sys_global_symbol_pipe=
+  fi
+done
+])
+if test -z "$lt_cv_sys_global_symbol_pipe"; then
+  lt_cv_sys_global_symbol_to_cdecl=
+fi
+if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then
+  AC_MSG_RESULT(failed)
 else
-  GXX=no
-  with_gnu_ld=no
-  wlarc=
+  AC_MSG_RESULT(ok)
 fi
 
-# PORTME: fill in a description of your system's C++ link characteristics
-AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries])
-_LT_AC_TAGVAR(ld_shlibs, $1)=yes
-case $host_os in
-  aix3*)
-    # FIXME: insert proper C++ library support
-    _LT_AC_TAGVAR(ld_shlibs, $1)=no
-    ;;
-  aix[[4-9]]*)
-    if test "$host_cpu" = ia64; then
-      # On IA64, the linker does run time linking by default, so we don't
-      # have to do anything special.
-      aix_use_runtimelinking=no
-      exp_sym_flag='-Bexport'
-      no_entry_flag=""
-    else
-      aix_use_runtimelinking=no
-
-      # Test if we are trying to use run time linking or normal
-      # AIX style linking. If -brtl is somewhere in LDFLAGS, we
-      # need to do runtime linking.
-      case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*)
-	for ld_flag in $LDFLAGS; do
-	  case $ld_flag in
-	  *-brtl*)
-	    aix_use_runtimelinking=yes
-	    break
-	    ;;
-	  esac
-	done
-	;;
-      esac
-
-      exp_sym_flag='-bexport'
-      no_entry_flag='-bnoentry'
-    fi
+_LT_DECL([global_symbol_pipe], [lt_cv_sys_global_symbol_pipe], [1],
+    [Take the output of nm and produce a listing of raw symbols and C names])
+_LT_DECL([global_symbol_to_cdecl], [lt_cv_sys_global_symbol_to_cdecl], [1],
+    [Transform the output of nm in a proper C declaration])
+_LT_DECL([global_symbol_to_c_name_address],
+    [lt_cv_sys_global_symbol_to_c_name_address], [1],
+    [Transform the output of nm in a C name address pair])
+_LT_DECL([global_symbol_to_c_name_address_lib_prefix],
+    [lt_cv_sys_global_symbol_to_c_name_address_lib_prefix], [1],
+    [Transform the output of nm in a C name address pair when lib prefix is needed])
+]) # _LT_CMD_GLOBAL_SYMBOLS
 
-    # When large executables or shared objects are built, AIX ld can
-    # have problems creating the table of contents.  If linking a library
-    # or program results in "error TOC overflow" add -mminimal-toc to
-    # CXXFLAGS/CFLAGS for g++/gcc.  In the cases where that is not
-    # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
-
-    _LT_AC_TAGVAR(archive_cmds, $1)=''
-    _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-    _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':'
-    _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
 
-    if test "$GXX" = yes; then
-      case $host_os in aix4.[[012]]|aix4.[[012]].*)
-      # We only want to do this on AIX 4.2 and lower, the check
-      # below for broken collect2 doesn't work under 4.3+
-	collect2name=`${CC} -print-prog-name=collect2`
-	if test -f "$collect2name" && \
-	   strings "$collect2name" | grep resolve_lib_name >/dev/null
-	then
-	  # We have reworked collect2
-	  :
-	else
-	  # We have old collect2
-	  _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported
-	  # It fails to find uninstalled libraries when the uninstalled
-	  # path is not listed in the libpath.  Setting hardcode_minus_L
-	  # to unsupported forces relinking
-	  _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-	  _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-	  _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
-	fi
-	;;
-      esac
-      shared_flag='-shared'
-      if test "$aix_use_runtimelinking" = yes; then
-	shared_flag="$shared_flag "'${wl}-G'
-      fi
-    else
-      # not using gcc
-      if test "$host_cpu" = ia64; then
-	# VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
-	# chokes on -Wl,-G. The following line is correct:
-	shared_flag='-G'
-      else
-	if test "$aix_use_runtimelinking" = yes; then
-	  shared_flag='${wl}-G'
-	else
-	  shared_flag='${wl}-bM:SRE'
-	fi
-      fi
-    fi
+# _LT_COMPILER_PIC([TAGNAME])
+# ---------------------------
+m4_defun([_LT_COMPILER_PIC],
+[m4_require([_LT_TAG_COMPILER])dnl
+_LT_TAGVAR(lt_prog_compiler_wl, $1)=
+_LT_TAGVAR(lt_prog_compiler_pic, $1)=
+_LT_TAGVAR(lt_prog_compiler_static, $1)=
 
-    # It seems that -bexpall does not export symbols beginning with
-    # underscore (_), so it is better to generate a list of symbols to export.
-    _LT_AC_TAGVAR(always_export_symbols, $1)=yes
-    if test "$aix_use_runtimelinking" = yes; then
-      # Warning - without using the other runtime loading flags (-brtl),
-      # -berok will link without error, but may produce a broken library.
-      _LT_AC_TAGVAR(allow_undefined_flag, $1)='-berok'
-      # Determine the default libpath from the value encoded in an empty executable.
-      _LT_AC_SYS_LIBPATH_AIX
-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
+AC_MSG_CHECKING([for $compiler option to produce PIC])
+m4_if([$1], [CXX], [
+  # C++ specific cases for pic, static, wl, etc.
+  if test "$GXX" = yes; then
+    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+    _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
 
-      _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
-     else
+    case $host_os in
+    aix*)
+      # All AIX code is PIC.
       if test "$host_cpu" = ia64; then
-	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
-	_LT_AC_TAGVAR(allow_undefined_flag, $1)="-z nodefs"
-	_LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
-      else
-	# Determine the default libpath from the value encoded in an empty executable.
-	_LT_AC_SYS_LIBPATH_AIX
-	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
-	# Warning - without using the other run time loading flags,
-	# -berok will link without error, but may produce a broken library.
-	_LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
-	_LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
-	# Exported symbols can be pulled into shared objects from archives
-	_LT_AC_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
-	_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes
-	# This is similar to how AIX traditionally builds its shared libraries.
-	_LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
-      fi
-    fi
-    ;;
-
-  beos*)
-    if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-      _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
-      # Joseph Beckenbach <jrb3@best.com> says some releases of gcc
-      # support --undefined.  This deserves some investigation.  FIXME
-      _LT_AC_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-    else
-      _LT_AC_TAGVAR(ld_shlibs, $1)=no
-    fi
-    ;;
-
-  chorus*)
-    case $cc_basename in
-      *)
-	# FIXME: insert proper C++ library support
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
-	;;
-    esac
-    ;;
-
-  cygwin* | mingw* | pw32*)
-    # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
-    # as there is no search path for DLLs.
-    _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-    _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
-    _LT_AC_TAGVAR(always_export_symbols, $1)=no
-    _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
-
-    if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
-      _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
-      # If the export-symbols file already is a .def file (1st line
-      # is EXPORTS), use it as is; otherwise, prepend...
-      _LT_AC_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
-	cp $export_symbols $output_objdir/$soname.def;
-      else
-	echo EXPORTS > $output_objdir/$soname.def;
-	cat $export_symbols >> $output_objdir/$soname.def;
-      fi~
-      $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
-    else
-      _LT_AC_TAGVAR(ld_shlibs, $1)=no
-    fi
-  ;;
-      darwin* | rhapsody*)
-      _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-      _LT_AC_TAGVAR(hardcode_direct, $1)=no
-      _LT_AC_TAGVAR(hardcode_automatic, $1)=yes
-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
-      _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=''
-      _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
-      _LT_AC_TAGVAR(allow_undefined_flag, $1)="$_lt_dar_allow_undefined"
-      if test "$GXX" = yes ; then
-      output_verbose_link_cmd='echo'
-      _LT_AC_TAGVAR(archive_cmds, $1)="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}"
-      _LT_AC_TAGVAR(module_cmds, $1)="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}"
-      _LT_AC_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}"
-      _LT_AC_TAGVAR(module_expsym_cmds, $1)="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}"
-      if test "$lt_cv_apple_cc_single_mod" != "yes"; then
-        _LT_AC_TAGVAR(archive_cmds, $1)="\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dsymutil}"
-        _LT_AC_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dar_export_syms}${_lt_dsymutil}"
-      fi
-      else
-      case $cc_basename in
-        xlc*)
-         output_verbose_link_cmd='echo'
-          _LT_AC_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj ${wl}-single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $xlcverstring'
-          _LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
-          # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
-          _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj ${wl}-single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $xlcverstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-          _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag  -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-          ;;
-       *)
-         _LT_AC_TAGVAR(ld_shlibs, $1)=no
-          ;;
-      esac
-      fi
-        ;;
-
-  dgux*)
-    case $cc_basename in
-      ec++*)
-	# FIXME: insert proper C++ library support
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
-	;;
-      ghcx*)
-	# Green Hills C++ Compiler
-	# FIXME: insert proper C++ library support
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
-	;;
-      *)
-	# FIXME: insert proper C++ library support
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
-	;;
-    esac
-    ;;
-  freebsd[[12]]*)
-    # C++ shared libraries reported to be fairly broken before switch to ELF
-    _LT_AC_TAGVAR(ld_shlibs, $1)=no
-    ;;
-  freebsd-elf*)
-    _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-    ;;
-  freebsd* | dragonfly*)
-    # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF
-    # conventions
-    _LT_AC_TAGVAR(ld_shlibs, $1)=yes
-    ;;
-  gnu*)
-    ;;
-  hpux9*)
-    _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
-    _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-    _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
-    _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-    _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
-				# but as the default
-				# location of the library.
-
-    case $cc_basename in
-    CC*)
-      # FIXME: insert proper C++ library support
-      _LT_AC_TAGVAR(ld_shlibs, $1)=no
-      ;;
-    aCC*)
-      _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
-      # Commands to make compiler produce verbose output that lists
-      # what "hidden" libraries, object files and flags are used when
-      # linking a shared library.
-      #
-      # There doesn't appear to be a way to prevent this compiler from
-      # explicitly linking system object files so we need to strip them
-      # from the output so that they don't get included in the library
-      # dependencies.
-      output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "[[-]]L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
-      ;;
-    *)
-      if test "$GXX" = yes; then
-        _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -shared -nostdlib -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
-      else
-        # FIXME: insert proper C++ library support
-        _LT_AC_TAGVAR(ld_shlibs, $1)=no
+	# AIX 5 now supports IA64 processor
+	_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
       fi
       ;;
-    esac
-    ;;
-  hpux10*|hpux11*)
-    if test $with_gnu_ld = no; then
-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
-      _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
 
+    amigaos*)
       case $host_cpu in
-      hppa*64*|ia64*) ;;
-      *)
-	_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+      powerpc)
+            # see comment about AmigaOS4 .so support
+            _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+        ;;
+      m68k)
+            # FIXME: we need at least 68020 code to build shared libraries, but
+            # adding the `-m68020' flag to GCC prevents building anything better,
+            # like `-m68040'.
+            _LT_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4'
         ;;
       esac
-    fi
-    case $host_cpu in
-    hppa*64*|ia64*)
-      _LT_AC_TAGVAR(hardcode_direct, $1)=no
-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-      ;;
-    *)
-      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-      _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
-					      # but as the default
-					      # location of the library.
       ;;
-    esac
 
-    case $cc_basename in
-      CC*)
-	# FIXME: insert proper C++ library support
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
+    beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
+      # PIC is the default for these OSes.
+      ;;
+    mingw* | cygwin* | os2* | pw32* | cegcc*)
+      # This hack is so that the source file can tell whether it is being
+      # built for inclusion in a dll (and should export symbols for example).
+      # Although the cygwin gcc ignores -fPIC, still need this for old-style
+      # (--disable-auto-import) libraries
+      m4_if([$1], [GCJ], [],
+	[_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
+      ;;
+    darwin* | rhapsody*)
+      # PIC is the default on this platform
+      # Common symbols not allowed in MH_DYLIB files
+      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'
+      ;;
+    *djgpp*)
+      # DJGPP does not support shared libraries at all
+      _LT_TAGVAR(lt_prog_compiler_pic, $1)=
+      ;;
+    interix[[3-9]]*)
+      # Interix 3.x gcc -fpic/-fPIC options generate broken code.
+      # Instead, we relocate shared libraries at runtime.
+      ;;
+    sysv4*MP*)
+      if test -d /usr/nec; then
+	_LT_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic
+      fi
+      ;;
+    hpux*)
+      # PIC is the default for 64-bit PA HP-UX, but not for 32-bit
+      # PA HP-UX.  On IA64 HP-UX, PIC is the default but the pic flag
+      # sets the default TLS model and affects inlining.
+      case $host_cpu in
+      hppa*64*)
 	;;
-      aCC*)
-	case $host_cpu in
-	hppa*64*)
-	  _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-	  ;;
-	ia64*)
-	  _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-	  ;;
-	*)
-	  _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+      *)
+	_LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+	;;
+      esac
+      ;;
+    *qnx* | *nto*)
+      # QNX uses GNU C++, but need to define -shared option too, otherwise
+      # it will coredump.
+      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared'
+      ;;
+    *)
+      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+      ;;
+    esac
+  else
+    case $host_os in
+      aix[[4-9]]*)
+	# All AIX code is PIC.
+	if test "$host_cpu" = ia64; then
+	  # AIX 5 now supports IA64 processor
+	  _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+	else
+	  _LT_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp'
+	fi
+	;;
+      chorus*)
+	case $cc_basename in
+	cxch68*)
+	  # Green Hills C++ Compiler
+	  # _LT_TAGVAR(lt_prog_compiler_static, $1)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a"
 	  ;;
 	esac
-	# Commands to make compiler produce verbose output that lists
-	# what "hidden" libraries, object files and flags are used when
-	# linking a shared library.
-	#
-	# There doesn't appear to be a way to prevent this compiler from
-	# explicitly linking system object files so we need to strip them
-	# from the output so that they don't get included in the library
-	# dependencies.
-	output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
 	;;
-      *)
-	if test "$GXX" = yes; then
-	  if test $with_gnu_ld = no; then
+      dgux*)
+	case $cc_basename in
+	  ec++*)
+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+	    ;;
+	  ghcx*)
+	    # Green Hills C++ Compiler
+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
+	    ;;
+	  *)
+	    ;;
+	esac
+	;;
+      freebsd* | dragonfly*)
+	# FreeBSD uses GNU C++
+	;;
+      hpux9* | hpux10* | hpux11*)
+	case $cc_basename in
+	  CC*)
+	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	    _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
+	    if test "$host_cpu" != ia64; then
+	      _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
+	    fi
+	    ;;
+	  aCC*)
+	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	    _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
 	    case $host_cpu in
-	    hppa*64*)
-	      _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-	      ;;
-	    ia64*)
-	      _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	    hppa*64*|ia64*)
+	      # +Z the default
 	      ;;
 	    *)
-	      _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	      _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
 	      ;;
 	    esac
-	  fi
-	else
-	  # FIXME: insert proper C++ library support
-	  _LT_AC_TAGVAR(ld_shlibs, $1)=no
-	fi
-	;;
-    esac
-    ;;
-  interix[[3-9]]*)
-    _LT_AC_TAGVAR(hardcode_direct, $1)=no
-    _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-    _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-    _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
-    # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
-    # Instead, shared libraries are loaded at an image base (0x10000000 by
-    # default) and relocated if they conflict, which is a slow very memory
-    # consuming and fragmenting process.  To avoid this, we pick a random,
-    # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
-    # time.  Moving up from 0x10000000 also allows more sbrk(2) space.
-    _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
-    _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
-    ;;
-  irix5* | irix6*)
-    case $cc_basename in
-      CC*)
-	# SGI C++
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-
-	# Archives containing C++ object files must be created using
-	# "CC -ar", where "CC" is the IRIX C++ compiler.  This is
-	# necessary to make sure instantiated templates are included
-	# in the archive.
-	_LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -ar -WR,-u -o $oldlib $oldobjs'
+	    ;;
+	  *)
+	    ;;
+	esac
 	;;
-      *)
-	if test "$GXX" = yes; then
-	  if test "$with_gnu_ld" = no; then
-	    _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-	  else
-	    _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` -o $lib'
-	  fi
-	fi
-	_LT_AC_TAGVAR(link_all_deplibs, $1)=yes
+      interix*)
+	# This is c89, which is MS Visual C++ (no shared libs)
+	# Anyone wants to do a port?
 	;;
-    esac
-    _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-    _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-    ;;
-  linux* | k*bsd*-gnu)
-    case $cc_basename in
-      KCC*)
-	# Kuck and Associates, Inc. (KAI) C++ Compiler
-
-	# KCC will only create a shared library if the output file
-	# ends with ".so" (or ".sl" for HP-UX), so rename the library
-	# to its proper name (with version) after linking.
-	_LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
-	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib'
-	# Commands to make compiler produce verbose output that lists
-	# what "hidden" libraries, object files and flags are used when
-	# linking a shared library.
-	#
-	# There doesn't appear to be a way to prevent this compiler from
-	# explicitly linking system object files so we need to strip them
-	# from the output so that they don't get included in the library
-	# dependencies.
-	output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | grep "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
-
-	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath,$libdir'
-	_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
-
-	# Archives containing C++ object files must be created using
-	# "CC -Bstatic", where "CC" is the KAI C++ compiler.
-	_LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs'
-	;;
-      icpc*)
-	# Intel C++
-	with_gnu_ld=yes
-	# version 8.0 and above of icpc choke on multiply defined symbols
-	# if we add $predep_objects and $postdep_objects, however 7.1 and
-	# earlier do not add the objects themselves.
-	case `$CC -V 2>&1` in
-	*"Version 7."*)
-  	  _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
-  	  _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-	  ;;
-	*)  # Version 8.0 or newer
-	  tmp_idyn=
-	  case $host_cpu in
-	    ia64*) tmp_idyn=' -i_dynamic';;
-	  esac
-  	  _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-	  _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-	  ;;
+      irix5* | irix6* | nonstopux*)
+	case $cc_basename in
+	  CC*)
+	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+	    # CC pic flag -KPIC is the default.
+	    ;;
+	  *)
+	    ;;
 	esac
-	_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-	_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
-	_LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
-	;;
-      pgCC* | pgcpp*)
-        # Portland Group C++ compiler
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
-  	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
-
-	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir'
-	_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
-	_LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
-        ;;
-      cxx*)
-	# Compaq C++
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
-	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname  -o $lib ${wl}-retain-symbols-file $wl$export_symbols'
-
-	runpath_var=LD_RUN_PATH
-	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
-	_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-
-	# Commands to make compiler produce verbose output that lists
-	# what "hidden" libraries, object files and flags are used when
-	# linking a shared library.
-	#
-	# There doesn't appear to be a way to prevent this compiler from
-	# explicitly linking system object files so we need to strip them
-	# from the output so that they don't get included in the library
-	# dependencies.
-	output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
 	;;
-      *)
-	case `$CC -V 2>&1 | sed 5q` in
-	*Sun\ C*)
-	  # Sun C++ 5.9
-	  _LT_AC_TAGVAR(no_undefined_flag, $1)=' -zdefs'
-	  _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-	  _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file ${wl}$export_symbols'
-	  _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-	  _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
-
-	  # Not sure whether something based on
-	  # $CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1
-	  # would be better.
-	  output_verbose_link_cmd='echo'
-
-	  # Archives containing C++ object files must be created using
-	  # "CC -xar", where "CC" is the Sun C++ compiler.  This is
-	  # necessary to make sure instantiated templates are included
-	  # in the archive.
-	  _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs'
-	  ;;
+      linux* | k*bsd*-gnu)
+	case $cc_basename in
+	  KCC*)
+	    # KAI C++ Compiler
+	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,'
+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+	    ;;
+	  ecpc* )
+	    # old Intel C++ for x86_64 which still supported -KPIC.
+	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
+	    ;;
+	  icpc* )
+	    # Intel C++, used to be incompatible with GCC.
+	    # ICC 10 doesn't accept -KPIC any more.
+	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
+	    ;;
+	  pgCC* | pgcpp*)
+	    # Portland Group C++ compiler
+	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic'
+	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+	    ;;
+	  cxx*)
+	    # Compaq C++
+	    # Make sure the PIC flag is empty.  It appears that all Alpha
+	    # Linux and Compaq Tru64 Unix objects are PIC.
+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)=
+	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+	    ;;
+	  xlc* | xlC*)
+	    # IBM XL 8.0 on PPC
+	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-qpic'
+	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-qstaticlink'
+	    ;;
+	  *)
+	    case `$CC -V 2>&1 | sed 5q` in
+	    *Sun\ C*)
+	      # Sun C++ 5.9
+	      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+	      _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+	      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
+	      ;;
+	    esac
+	    ;;
 	esac
 	;;
-    esac
-    ;;
-  lynxos*)
-    # FIXME: insert proper C++ library support
-    _LT_AC_TAGVAR(ld_shlibs, $1)=no
-    ;;
-  m88k*)
-    # FIXME: insert proper C++ library support
-    _LT_AC_TAGVAR(ld_shlibs, $1)=no
-    ;;
-  mvs*)
-    case $cc_basename in
-      cxx*)
-	# FIXME: insert proper C++ library support
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
-	;;
-      *)
-	# FIXME: insert proper C++ library support
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
-	;;
-    esac
-    ;;
-  netbsd*)
-    if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-      _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable  -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags'
-      wlarc=
-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-    fi
-    # Workaround some broken pre-1.5 toolchains
-    output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"'
-    ;;
-  openbsd2*)
-    # C++ shared libraries are fairly broken
-    _LT_AC_TAGVAR(ld_shlibs, $1)=no
-    ;;
-  openbsd*)
-    if test -f /usr/libexec/ld.so; then
-      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-      _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-      if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib'
-	_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
-	_LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
-      fi
-      output_verbose_link_cmd='echo'
-    else
-      _LT_AC_TAGVAR(ld_shlibs, $1)=no
-    fi
-    ;;
-  osf3*)
-    case $cc_basename in
-      KCC*)
-	# Kuck and Associates, Inc. (KAI) C++ Compiler
-
-	# KCC will only create a shared library if the output file
-	# ends with ".so" (or ".sl" for HP-UX), so rename the library
-	# to its proper name (with version) after linking.
-	_LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
-
-	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-	_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-
-	# Archives containing C++ object files must be created using
-	# "CC -Bstatic", where "CC" is the KAI C++ compiler.
-	_LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs'
-
-	;;
-      RCC*)
-	# Rational C++ 2.4.1
-	# FIXME: insert proper C++ library support
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
-	;;
-      cxx*)
-	_LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && echo ${wl}-set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-
-	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-	_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-
-	# Commands to make compiler produce verbose output that lists
-	# what "hidden" libraries, object files and flags are used when
-	# linking a shared library.
-	#
-	# There doesn't appear to be a way to prevent this compiler from
-	# explicitly linking system object files so we need to strip them
-	# from the output so that they don't get included in the library
-	# dependencies.
-	output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
+      lynxos*)
 	;;
-      *)
-	if test "$GXX" = yes && test "$with_gnu_ld" = no; then
-	  _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
-	  _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-
-	  _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-	  _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-
-	  # Commands to make compiler produce verbose output that lists
-	  # what "hidden" libraries, object files and flags are used when
-	  # linking a shared library.
-	  output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"'
-
-	else
-	  # FIXME: insert proper C++ library support
-	  _LT_AC_TAGVAR(ld_shlibs, $1)=no
-	fi
+      m88k*)
 	;;
-    esac
-    ;;
-  osf4* | osf5*)
-    case $cc_basename in
-      KCC*)
-	# Kuck and Associates, Inc. (KAI) C++ Compiler
-
-	# KCC will only create a shared library if the output file
-	# ends with ".so" (or ".sl" for HP-UX), so rename the library
-	# to its proper name (with version) after linking.
-	_LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
-
-	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-	_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-
-	# Archives containing C++ object files must be created using
-	# the KAI C++ compiler.
-	_LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -o $oldlib $oldobjs'
-	;;
-      RCC*)
-	# Rational C++ 2.4.1
-	# FIXME: insert proper C++ library support
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
-	;;
-      cxx*)
-	_LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~
-	  echo "-hidden">> $lib.exp~
-	  $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname -Wl,-input -Wl,$lib.exp  `test -n "$verstring" && echo -set_version	$verstring` -update_registry ${output_objdir}/so_locations -o $lib~
-	  $rm $lib.exp'
-
-	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
-	_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-
-	# Commands to make compiler produce verbose output that lists
-	# what "hidden" libraries, object files and flags are used when
-	# linking a shared library.
-	#
-	# There doesn't appear to be a way to prevent this compiler from
-	# explicitly linking system object files so we need to strip them
-	# from the output so that they don't get included in the library
-	# dependencies.
-	output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
+      mvs*)
+	case $cc_basename in
+	  cxx*)
+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-W c,exportall'
+	    ;;
+	  *)
+	    ;;
+	esac
 	;;
-      *)
-	if test "$GXX" = yes && test "$with_gnu_ld" = no; then
-	  _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
-	 _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-
-	  _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-	  _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-
-	  # Commands to make compiler produce verbose output that lists
-	  # what "hidden" libraries, object files and flags are used when
-	  # linking a shared library.
-	  output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"'
-
-	else
-	  # FIXME: insert proper C++ library support
-	  _LT_AC_TAGVAR(ld_shlibs, $1)=no
-	fi
+      netbsd* | netbsdelf*-gnu)
 	;;
-    esac
-    ;;
-  psos*)
-    # FIXME: insert proper C++ library support
-    _LT_AC_TAGVAR(ld_shlibs, $1)=no
-    ;;
-  sunos4*)
-    case $cc_basename in
-      CC*)
-	# Sun C++ 4.x
-	# FIXME: insert proper C++ library support
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
-	;;
-      lcc*)
-	# Lucid
-	# FIXME: insert proper C++ library support
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
+      *qnx* | *nto*)
+        # QNX uses GNU C++, but need to define -shared option too, otherwise
+        # it will coredump.
+        _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared'
+        ;;
+      osf3* | osf4* | osf5*)
+	case $cc_basename in
+	  KCC*)
+	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,'
+	    ;;
+	  RCC*)
+	    # Rational C++ 2.4.1
+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
+	    ;;
+	  cxx*)
+	    # Digital/Compaq C++
+	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	    # Make sure the PIC flag is empty.  It appears that all Alpha
+	    # Linux and Compaq Tru64 Unix objects are PIC.
+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)=
+	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+	    ;;
+	  *)
+	    ;;
+	esac
 	;;
-      *)
-	# FIXME: insert proper C++ library support
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
+      psos*)
 	;;
-    esac
-    ;;
-  solaris*)
-    case $cc_basename in
-      CC*)
-	# Sun C++ 4.2, 5.x and Centerline C++
-        _LT_AC_TAGVAR(archive_cmds_need_lc,$1)=yes
-	_LT_AC_TAGVAR(no_undefined_flag, $1)=' -zdefs'
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag}  -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-	$CC -G${allow_undefined_flag}  ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'
-
-	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-	_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-	case $host_os in
-	  solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
+      solaris*)
+	case $cc_basename in
+	  CC*)
+	    # Sun C++ 4.2, 5.x and Centerline C++
+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
+	    ;;
+	  gcx*)
+	    # Green Hills C++ Compiler
+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
+	    ;;
 	  *)
-	    # The compiler driver will combine and reorder linker options,
-	    # but understands `-z linker_flag'.
-	    # Supported since Solaris 2.6 (maybe 2.5.1?)
-	    _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract'
 	    ;;
 	esac
-	_LT_AC_TAGVAR(link_all_deplibs, $1)=yes
-
-	output_verbose_link_cmd='echo'
-
-	# Archives containing C++ object files must be created using
-	# "CC -xar", where "CC" is the Sun C++ compiler.  This is
-	# necessary to make sure instantiated templates are included
-	# in the archive.
-	_LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs'
-	;;
-      gcx*)
-	# Green Hills C++ Compiler
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
-
-	# The C++ compiler must be used to create the archive.
-	_LT_AC_TAGVAR(old_archive_cmds, $1)='$CC $LDFLAGS -archive -o $oldlib $oldobjs'
 	;;
-      *)
-	# GNU C++ compiler with Solaris linker
-	if test "$GXX" = yes && test "$with_gnu_ld" = no; then
-	  _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-z ${wl}defs'
-	  if $CC --version | grep -v '^2\.7' > /dev/null; then
-	    _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
-	    _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-		$CC -shared -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'
-
-	    # Commands to make compiler produce verbose output that lists
-	    # what "hidden" libraries, object files and flags are used when
-	    # linking a shared library.
-	    output_verbose_link_cmd="$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep \"\-L\""
-	  else
-	    # g++ 2.7 appears to require `-G' NOT `-shared' on this
-	    # platform.
-	    _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
-	    _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-		$CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'
-
-	    # Commands to make compiler produce verbose output that lists
-	    # what "hidden" libraries, object files and flags are used when
-	    # linking a shared library.
-	    output_verbose_link_cmd="$CC -G $CFLAGS -v conftest.$objext 2>&1 | grep \"\-L\""
-	  fi
-
-	  _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $wl$libdir'
-	  case $host_os in
-	  solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
+      sunos4*)
+	case $cc_basename in
+	  CC*)
+	    # Sun C++ 4.x
+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
+	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+	    ;;
+	  lcc*)
+	    # Lucid
+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
+	    ;;
 	  *)
-	    _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
 	    ;;
-	  esac
-	fi
+	esac
 	;;
-    esac
-    ;;
-  sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*)
-    _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
-    _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-    _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-    runpath_var='LD_RUN_PATH'
-
-    case $cc_basename in
-      CC*)
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+      sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
+	case $cc_basename in
+	  CC*)
+	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+	    ;;
+	esac
 	;;
-      *)
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+      tandem*)
+	case $cc_basename in
+	  NCC*)
+	    # NonStop-UX NCC 3.20
+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+	    ;;
+	  *)
+	    ;;
+	esac
 	;;
-    esac
-    ;;
-  sysv5* | sco3.2v5* | sco5v6*)
-    # Note: We can NOT use -z defs as we might desire, because we do not
-    # link with -lc, and that would cause any symbols used from libc to
-    # always be unresolved, which means just about no library would
-    # ever link correctly.  If we're not using GNU ld we use -z text
-    # though, which does catch some bad symbols but isn't as heavy-handed
-    # as -z defs.
-    # For security reasons, it is highly recommended that you always
-    # use absolute paths for naming shared libraries, and exclude the
-    # DT_RUNPATH tag from executables and libraries.  But doing so
-    # requires that you compile everything twice, which is a pain.
-    # So that behaviour is only enabled if SCOABSPATH is set to a
-    # non-empty value in the environment.  Most likely only useful for
-    # creating official distributions of packages.
-    # This is a hack until libtool officially supports absolute path
-    # names for shared libraries.
-    _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
-    _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs'
-    _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-    _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-    _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`'
-    _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':'
-    _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
-    _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport'
-    runpath_var='LD_RUN_PATH'
-
-    case $cc_basename in
-      CC*)
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
-	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
+      vxworks*)
 	;;
       *)
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
-	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	_LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
 	;;
     esac
-    ;;
-  tandem*)
-    case $cc_basename in
-      NCC*)
-	# NonStop-UX NCC 3.20
-	# FIXME: insert proper C++ library support
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
-	;;
-      *)
-	# FIXME: insert proper C++ library support
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
-	;;
-    esac
-    ;;
-  vxworks*)
-    # FIXME: insert proper C++ library support
-    _LT_AC_TAGVAR(ld_shlibs, $1)=no
-    ;;
-  *)
-    # FIXME: insert proper C++ library support
-    _LT_AC_TAGVAR(ld_shlibs, $1)=no
-    ;;
-esac
-AC_MSG_RESULT([$_LT_AC_TAGVAR(ld_shlibs, $1)])
-test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no
+  fi
+],
+[
+  if test "$GCC" = yes; then
+    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+    _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
 
-_LT_AC_TAGVAR(GCC, $1)="$GXX"
-_LT_AC_TAGVAR(LD, $1)="$LD"
+    case $host_os in
+      aix*)
+      # All AIX code is PIC.
+      if test "$host_cpu" = ia64; then
+	# AIX 5 now supports IA64 processor
+	_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+      fi
+      ;;
 
-AC_LIBTOOL_POSTDEP_PREDEP($1)
-AC_LIBTOOL_PROG_COMPILER_PIC($1)
-AC_LIBTOOL_PROG_CC_C_O($1)
-AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1)
-AC_LIBTOOL_PROG_LD_SHLIBS($1)
-AC_LIBTOOL_SYS_DYNAMIC_LINKER($1)
-AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1)
+    amigaos*)
+      case $host_cpu in
+      powerpc)
+            # see comment about AmigaOS4 .so support
+            _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+        ;;
+      m68k)
+            # FIXME: we need at least 68020 code to build shared libraries, but
+            # adding the `-m68020' flag to GCC prevents building anything better,
+            # like `-m68040'.
+            _LT_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4'
+        ;;
+      esac
+      ;;
 
-AC_LIBTOOL_CONFIG($1)
+    beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
+      # PIC is the default for these OSes.
+      ;;
 
-AC_LANG_POP
-CC=$lt_save_CC
-LDCXX=$LD
-LD=$lt_save_LD
-GCC=$lt_save_GCC
-with_gnu_ldcxx=$with_gnu_ld
-with_gnu_ld=$lt_save_with_gnu_ld
-lt_cv_path_LDCXX=$lt_cv_path_LD
-lt_cv_path_LD=$lt_save_path_LD
-lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld
-lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld
-])# AC_LIBTOOL_LANG_CXX_CONFIG
+    mingw* | cygwin* | pw32* | os2* | cegcc*)
+      # This hack is so that the source file can tell whether it is being
+      # built for inclusion in a dll (and should export symbols for example).
+      # Although the cygwin gcc ignores -fPIC, still need this for old-style
+      # (--disable-auto-import) libraries
+      m4_if([$1], [GCJ], [],
+	[_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
+      ;;
 
-# AC_LIBTOOL_POSTDEP_PREDEP([TAGNAME])
-# ------------------------------------
-# Figure out "hidden" library dependencies from verbose
-# compiler output when linking a shared library.
-# Parse the compiler output and extract the necessary
-# objects, libraries and library flags.
-AC_DEFUN([AC_LIBTOOL_POSTDEP_PREDEP],
-[AC_REQUIRE([LT_AC_PROG_SED])dnl
-dnl we can't use the lt_simple_compile_test_code here,
-dnl because it contains code intended for an executable,
-dnl not a library.  It's possible we should let each
-dnl tag define a new lt_????_link_test_code variable,
-dnl but it's only used here...
-ifelse([$1],[],[cat > conftest.$ac_ext <<EOF
-int a;
-void foo (void) { a = 0; }
-EOF
-],[$1],[CXX],[cat > conftest.$ac_ext <<EOF
-class Foo
-{
-public:
-  Foo (void) { a = 0; }
-private:
-  int a;
-};
-EOF
-],[$1],[F77],[cat > conftest.$ac_ext <<EOF
-      subroutine foo
-      implicit none
-      integer*4 a
-      a=0
-      return
-      end
-EOF
-],[$1],[GCJ],[cat > conftest.$ac_ext <<EOF
-public class foo {
-  private int a;
-  public void bar (void) {
-    a = 0;
-  }
-};
-EOF
-])
-dnl Parse the compiler output and extract the necessary
-dnl objects, libraries and library flags.
-if AC_TRY_EVAL(ac_compile); then
-  # Parse the compiler output and extract the necessary
-  # objects, libraries and library flags.
+    darwin* | rhapsody*)
+      # PIC is the default on this platform
+      # Common symbols not allowed in MH_DYLIB files
+      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'
+      ;;
 
-  # Sentinel used to keep track of whether or not we are before
-  # the conftest object file.
-  pre_test_object_deps_done=no
+    hpux*)
+      # PIC is the default for 64-bit PA HP-UX, but not for 32-bit
+      # PA HP-UX.  On IA64 HP-UX, PIC is the default but the pic flag
+      # sets the default TLS model and affects inlining.
+      case $host_cpu in
+      hppa*64*)
+	# +Z the default
+	;;
+      *)
+	_LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+	;;
+      esac
+      ;;
 
-  # The `*' in the case matches for architectures that use `case' in
-  # $output_verbose_cmd can trigger glob expansion during the loop
-  # eval without this substitution.
-  output_verbose_link_cmd=`$echo "X$output_verbose_link_cmd" | $Xsed -e "$no_glob_subst"`
+    interix[[3-9]]*)
+      # Interix 3.x gcc -fpic/-fPIC options generate broken code.
+      # Instead, we relocate shared libraries at runtime.
+      ;;
 
-  for p in `eval $output_verbose_link_cmd`; do
-    case $p in
+    msdosdjgpp*)
+      # Just because we use GCC doesn't mean we suddenly get shared libraries
+      # on systems that don't support them.
+      _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
+      enable_shared=no
+      ;;
 
-    -L* | -R* | -l*)
-       # Some compilers place space between "-{L,R}" and the path.
-       # Remove the space.
-       if test $p = "-L" \
-	  || test $p = "-R"; then
-	 prev=$p
-	 continue
-       else
-	 prev=
-       fi
+    *nto* | *qnx*)
+      # QNX uses GNU C++, but need to define -shared option too, otherwise
+      # it will coredump.
+      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared'
+      ;;
 
-       if test "$pre_test_object_deps_done" = no; then
-	 case $p in
-	 -L* | -R*)
-	   # Internal compiler library paths should come after those
-	   # provided the user.  The postdeps already come after the
-	   # user supplied libs so there is no need to process them.
-	   if test -z "$_LT_AC_TAGVAR(compiler_lib_search_path, $1)"; then
-	     _LT_AC_TAGVAR(compiler_lib_search_path, $1)="${prev}${p}"
-	   else
-	     _LT_AC_TAGVAR(compiler_lib_search_path, $1)="${_LT_AC_TAGVAR(compiler_lib_search_path, $1)} ${prev}${p}"
-	   fi
-	   ;;
-	 # The "-l" case would never come before the object being
-	 # linked, so don't bother handling this case.
-	 esac
-       else
-	 if test -z "$_LT_AC_TAGVAR(postdeps, $1)"; then
-	   _LT_AC_TAGVAR(postdeps, $1)="${prev}${p}"
-	 else
-	   _LT_AC_TAGVAR(postdeps, $1)="${_LT_AC_TAGVAR(postdeps, $1)} ${prev}${p}"
-	 fi
-       fi
-       ;;
+    sysv4*MP*)
+      if test -d /usr/nec; then
+	_LT_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic
+      fi
+      ;;
 
-    *.$objext)
-       # This assumes that the test object file only shows up
-       # once in the compiler output.
-       if test "$p" = "conftest.$objext"; then
-	 pre_test_object_deps_done=yes
-	 continue
-       fi
+    *)
+      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+      ;;
+    esac
+  else
+    # PORTME Check for flag to pass linker flags through the system compiler.
+    case $host_os in
+    aix*)
+      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+      if test "$host_cpu" = ia64; then
+	# AIX 5 now supports IA64 processor
+	_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+      else
+	_LT_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp'
+      fi
+      ;;
 
-       if test "$pre_test_object_deps_done" = no; then
-	 if test -z "$_LT_AC_TAGVAR(predep_objects, $1)"; then
-	   _LT_AC_TAGVAR(predep_objects, $1)="$p"
-	 else
-	   _LT_AC_TAGVAR(predep_objects, $1)="$_LT_AC_TAGVAR(predep_objects, $1) $p"
-	 fi
-       else
-	 if test -z "$_LT_AC_TAGVAR(postdep_objects, $1)"; then
-	   _LT_AC_TAGVAR(postdep_objects, $1)="$p"
-	 else
-	   _LT_AC_TAGVAR(postdep_objects, $1)="$_LT_AC_TAGVAR(postdep_objects, $1) $p"
-	 fi
-       fi
-       ;;
+    mingw* | cygwin* | pw32* | os2* | cegcc*)
+      # This hack is so that the source file can tell whether it is being
+      # built for inclusion in a dll (and should export symbols for example).
+      m4_if([$1], [GCJ], [],
+	[_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
+      ;;
 
-    *) ;; # Ignore the rest.
+    hpux9* | hpux10* | hpux11*)
+      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+      # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
+      # not for PA HP-UX.
+      case $host_cpu in
+      hppa*64*|ia64*)
+	# +Z the default
+	;;
+      *)
+	_LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
+	;;
+      esac
+      # Is there a better lt_prog_compiler_static that works with the bundled CC?
+      _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
+      ;;
 
-    esac
-  done
+    irix5* | irix6* | nonstopux*)
+      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+      # PIC (with -KPIC) is the default.
+      _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+      ;;
 
-  # Clean up.
-  rm -f a.out a.exe
-else
-  echo "libtool.m4: error: problem compiling $1 test program"
-fi
+    linux* | k*bsd*-gnu)
+      case $cc_basename in
+      # old Intel for x86_64 which still supported -KPIC.
+      ecc*)
+	_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	_LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+	_LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
+        ;;
+      # icc used to be incompatible with GCC.
+      # ICC 10 doesn't accept -KPIC any more.
+      icc* | ifort*)
+	_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	_LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+	_LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
+        ;;
+      # Lahey Fortran 8.1.
+      lf95*)
+	_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	_LT_TAGVAR(lt_prog_compiler_pic, $1)='--shared'
+	_LT_TAGVAR(lt_prog_compiler_static, $1)='--static'
+	;;
+      pgcc* | pgf77* | pgf90* | pgf95*)
+        # Portland Group compilers (*not* the Pentium gcc compiler,
+	# which looks to be a dead project)
+	_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	_LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic'
+	_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+        ;;
+      ccc*)
+        _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+        # All Alpha code is PIC.
+        _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+        ;;
+      xl*)
+	# IBM XL C 8.0/Fortran 10.1 on PPC
+	_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	_LT_TAGVAR(lt_prog_compiler_pic, $1)='-qpic'
+	_LT_TAGVAR(lt_prog_compiler_static, $1)='-qstaticlink'
+	;;
+      *)
+	case `$CC -V 2>&1 | sed 5q` in
+	*Sun\ C*)
+	  # Sun C 5.9
+	  _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+	  _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+	  _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	  ;;
+	*Sun\ F*)
+	  # Sun Fortran 8.3 passes all unrecognized flags to the linker
+	  _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+	  _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+	  _LT_TAGVAR(lt_prog_compiler_wl, $1)=''
+	  ;;
+	esac
+	;;
+      esac
+      ;;
 
-$rm -f confest.$objext
+    newsos6)
+      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+      _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+      ;;
 
-_LT_AC_TAGVAR(compiler_lib_search_dirs, $1)=
-if test -n "$_LT_AC_TAGVAR(compiler_lib_search_path, $1)"; then
-  _LT_AC_TAGVAR(compiler_lib_search_dirs, $1)=`echo " ${_LT_AC_TAGVAR(compiler_lib_search_path, $1)}" | ${SED} -e 's! -L! !g' -e 's!^ !!'`
-fi
+    *nto* | *qnx*)
+      # QNX uses GNU C++, but need to define -shared option too, otherwise
+      # it will coredump.
+      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared'
+      ;;
 
-# PORTME: override above test on systems where it is broken
-ifelse([$1],[CXX],
-[case $host_os in
-interix[[3-9]]*)
-  # Interix 3.5 installs completely hosed .la files for C++, so rather than
-  # hack all around it, let's just trust "g++" to DTRT.
-  _LT_AC_TAGVAR(predep_objects,$1)=
-  _LT_AC_TAGVAR(postdep_objects,$1)=
-  _LT_AC_TAGVAR(postdeps,$1)=
-  ;;
+    osf3* | osf4* | osf5*)
+      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+      # All OSF/1 code is PIC.
+      _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+      ;;
 
-linux*)
-  case `$CC -V 2>&1 | sed 5q` in
-  *Sun\ C*)
-    # Sun C++ 5.9
-    #
-    # The more standards-conforming stlport4 library is
-    # incompatible with the Cstd library. Avoid specifying
-    # it if it's in CXXFLAGS. Ignore libCrun as
-    # -library=stlport4 depends on it.
-    case " $CXX $CXXFLAGS " in
-    *" -library=stlport4 "*)
-      solaris_use_stlport4=yes
+    rdos*)
+      _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
       ;;
-    esac
-    if test "$solaris_use_stlport4" != yes; then
-      _LT_AC_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun'
-    fi
-    ;;
-  esac
-  ;;
 
-solaris*)
-  case $cc_basename in
-  CC*)
-    # The more standards-conforming stlport4 library is
-    # incompatible with the Cstd library. Avoid specifying
-    # it if it's in CXXFLAGS. Ignore libCrun as
-    # -library=stlport4 depends on it.
-    case " $CXX $CXXFLAGS " in
-    *" -library=stlport4 "*)
-      solaris_use_stlport4=yes
+    solaris*)
+      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+      _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+      case $cc_basename in
+      f77* | f90* | f95*)
+	_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ';;
+      *)
+	_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,';;
+      esac
       ;;
-    esac
 
-    # Adding this requires a known-good setup of shared libraries for
-    # Sun compiler versions before 5.6, else PIC objects from an old
-    # archive will be linked into the output, leading to subtle bugs.
-    if test "$solaris_use_stlport4" != yes; then
-      _LT_AC_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun'
-    fi
-    ;;
-  esac
-  ;;
-esac
-])
-case " $_LT_AC_TAGVAR(postdeps, $1) " in
-*" -lc "*) _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no ;;
-esac
-])# AC_LIBTOOL_POSTDEP_PREDEP
-
-# AC_LIBTOOL_LANG_F77_CONFIG
-# --------------------------
-# Ensure that the configuration vars for the C compiler are
-# suitably defined.  Those variables are subsequently used by
-# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
-AC_DEFUN([AC_LIBTOOL_LANG_F77_CONFIG], [_LT_AC_LANG_F77_CONFIG(F77)])
-AC_DEFUN([_LT_AC_LANG_F77_CONFIG],
-[AC_REQUIRE([AC_PROG_F77])
-AC_LANG_PUSH(Fortran 77)
-
-_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-_LT_AC_TAGVAR(allow_undefined_flag, $1)=
-_LT_AC_TAGVAR(always_export_symbols, $1)=no
-_LT_AC_TAGVAR(archive_expsym_cmds, $1)=
-_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=
-_LT_AC_TAGVAR(hardcode_direct, $1)=no
-_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=
-_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
-_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
-_LT_AC_TAGVAR(hardcode_minus_L, $1)=no
-_LT_AC_TAGVAR(hardcode_automatic, $1)=no
-_LT_AC_TAGVAR(module_cmds, $1)=
-_LT_AC_TAGVAR(module_expsym_cmds, $1)=
-_LT_AC_TAGVAR(link_all_deplibs, $1)=unknown
-_LT_AC_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
-_LT_AC_TAGVAR(no_undefined_flag, $1)=
-_LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
-_LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=no
+    sunos4*)
+      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
+      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
+      _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+      ;;
 
-# Source file extension for f77 test sources.
-ac_ext=f
+    sysv4 | sysv4.2uw2* | sysv4.3*)
+      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+      _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+      ;;
 
-# Object file extension for compiled f77 test sources.
-objext=o
-_LT_AC_TAGVAR(objext, $1)=$objext
+    sysv4*MP*)
+      if test -d /usr/nec ;then
+	_LT_TAGVAR(lt_prog_compiler_pic, $1)='-Kconform_pic'
+	_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+      fi
+      ;;
 
-# Code to be used in simple compile tests
-lt_simple_compile_test_code="\
-      subroutine t
-      return
-      end
-"
+    sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
+      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+      _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+      ;;
 
-# Code to be used in simple link tests
-lt_simple_link_test_code="\
-      program t
-      end
-"
+    unicos*)
+      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+      _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
+      ;;
 
-# ltmain only uses $CC for tagged configurations so make sure $CC is set.
-_LT_AC_SYS_COMPILER
+    uts4*)
+      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
+      _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+      ;;
 
-# save warnings/boilerplate of simple test code
-_LT_COMPILER_BOILERPLATE
-_LT_LINKER_BOILERPLATE
+    *)
+      _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
+      ;;
+    esac
+  fi
+])
+case $host_os in
+  # For platforms which do not support PIC, -DPIC is meaningless:
+  *djgpp*)
+    _LT_TAGVAR(lt_prog_compiler_pic, $1)=
+    ;;
+  *)
+    _LT_TAGVAR(lt_prog_compiler_pic, $1)="$_LT_TAGVAR(lt_prog_compiler_pic, $1)@&t@m4_if([$1],[],[ -DPIC],[m4_if([$1],[CXX],[ -DPIC],[])])"
+    ;;
+esac
+AC_MSG_RESULT([$_LT_TAGVAR(lt_prog_compiler_pic, $1)])
+_LT_TAGDECL([wl], [lt_prog_compiler_wl], [1],
+	[How to pass a linker flag through the compiler])
 
-# Allow CC to be a program name with arguments.
-lt_save_CC="$CC"
-CC=${F77-"f77"}
-compiler=$CC
-_LT_AC_TAGVAR(compiler, $1)=$CC
-_LT_CC_BASENAME([$compiler])
+#
+# Check to make sure the PIC flag actually works.
+#
+if test -n "$_LT_TAGVAR(lt_prog_compiler_pic, $1)"; then
+  _LT_COMPILER_OPTION([if $compiler PIC flag $_LT_TAGVAR(lt_prog_compiler_pic, $1) works],
+    [_LT_TAGVAR(lt_cv_prog_compiler_pic_works, $1)],
+    [$_LT_TAGVAR(lt_prog_compiler_pic, $1)@&t@m4_if([$1],[],[ -DPIC],[m4_if([$1],[CXX],[ -DPIC],[])])], [],
+    [case $_LT_TAGVAR(lt_prog_compiler_pic, $1) in
+     "" | " "*) ;;
+     *) _LT_TAGVAR(lt_prog_compiler_pic, $1)=" $_LT_TAGVAR(lt_prog_compiler_pic, $1)" ;;
+     esac],
+    [_LT_TAGVAR(lt_prog_compiler_pic, $1)=
+     _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no])
+fi
+_LT_TAGDECL([pic_flag], [lt_prog_compiler_pic], [1],
+	[Additional compiler flags for building library objects])
 
-AC_MSG_CHECKING([if libtool supports shared libraries])
-AC_MSG_RESULT([$can_build_shared])
+#
+# Check to make sure the static flag actually works.
+#
+wl=$_LT_TAGVAR(lt_prog_compiler_wl, $1) eval lt_tmp_static_flag=\"$_LT_TAGVAR(lt_prog_compiler_static, $1)\"
+_LT_LINKER_OPTION([if $compiler static flag $lt_tmp_static_flag works],
+  _LT_TAGVAR(lt_cv_prog_compiler_static_works, $1),
+  $lt_tmp_static_flag,
+  [],
+  [_LT_TAGVAR(lt_prog_compiler_static, $1)=])
+_LT_TAGDECL([link_static_flag], [lt_prog_compiler_static], [1],
+	[Compiler flag to prevent dynamic linking])
+])# _LT_COMPILER_PIC
 
-AC_MSG_CHECKING([whether to build shared libraries])
-test "$can_build_shared" = "no" && enable_shared=no
 
-# On AIX, shared libraries and static libraries use the same namespace, and
-# are all built from PIC.
-case $host_os in
-aix3*)
-  test "$enable_shared" = yes && enable_static=no
-  if test -n "$RANLIB"; then
-    archive_cmds="$archive_cmds~\$RANLIB \$lib"
-    postinstall_cmds='$RANLIB $lib'
-  fi
+# _LT_LINKER_SHLIBS([TAGNAME])
+# ----------------------------
+# See if the linker supports building shared libraries.
+m4_defun([_LT_LINKER_SHLIBS],
+[AC_REQUIRE([LT_PATH_LD])dnl
+AC_REQUIRE([LT_PATH_NM])dnl
+m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+m4_require([_LT_DECL_EGREP])dnl
+m4_require([_LT_DECL_SED])dnl
+m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl
+m4_require([_LT_TAG_COMPILER])dnl
+AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries])
+m4_if([$1], [CXX], [
+  _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+  case $host_os in
+  aix[[4-9]]*)
+    # If we're using GNU nm, then we don't want the "-C" option.
+    # -C means demangle to AIX nm, but means don't demangle with GNU nm
+    if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
+      _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+    else
+      _LT_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+    fi
+    ;;
+  pw32*)
+    _LT_TAGVAR(export_symbols_cmds, $1)="$ltdll_cmds"
   ;;
-aix[[4-9]]*)
-  if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
-    test "$enable_shared" = yes && enable_static=no
-  fi
+  cygwin* | mingw* | cegcc*)
+    _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;/^.*[[ ]]__nm__/s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.* //'\'' | sort | uniq > $export_symbols'
   ;;
-esac
-AC_MSG_RESULT([$enable_shared])
-
-AC_MSG_CHECKING([whether to build static libraries])
-# Make sure either enable_shared or enable_static is yes.
-test "$enable_shared" = yes || enable_static=yes
-AC_MSG_RESULT([$enable_static])
-
-_LT_AC_TAGVAR(GCC, $1)="$G77"
-_LT_AC_TAGVAR(LD, $1)="$LD"
-
-AC_LIBTOOL_PROG_COMPILER_PIC($1)
-AC_LIBTOOL_PROG_CC_C_O($1)
-AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1)
-AC_LIBTOOL_PROG_LD_SHLIBS($1)
-AC_LIBTOOL_SYS_DYNAMIC_LINKER($1)
-AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1)
+  linux* | k*bsd*-gnu)
+    _LT_TAGVAR(link_all_deplibs, $1)=no
+  ;;
+  *)
+    _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+  ;;
+  esac
+  _LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*']
+], [
+  runpath_var=
+  _LT_TAGVAR(allow_undefined_flag, $1)=
+  _LT_TAGVAR(always_export_symbols, $1)=no
+  _LT_TAGVAR(archive_cmds, $1)=
+  _LT_TAGVAR(archive_expsym_cmds, $1)=
+  _LT_TAGVAR(compiler_needs_object, $1)=no
+  _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
+  _LT_TAGVAR(export_dynamic_flag_spec, $1)=
+  _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+  _LT_TAGVAR(hardcode_automatic, $1)=no
+  _LT_TAGVAR(hardcode_direct, $1)=no
+  _LT_TAGVAR(hardcode_direct_absolute, $1)=no
+  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
+  _LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
+  _LT_TAGVAR(hardcode_libdir_separator, $1)=
+  _LT_TAGVAR(hardcode_minus_L, $1)=no
+  _LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
+  _LT_TAGVAR(inherit_rpath, $1)=no
+  _LT_TAGVAR(link_all_deplibs, $1)=unknown
+  _LT_TAGVAR(module_cmds, $1)=
+  _LT_TAGVAR(module_expsym_cmds, $1)=
+  _LT_TAGVAR(old_archive_from_new_cmds, $1)=
+  _LT_TAGVAR(old_archive_from_expsyms_cmds, $1)=
+  _LT_TAGVAR(thread_safe_flag_spec, $1)=
+  _LT_TAGVAR(whole_archive_flag_spec, $1)=
+  # include_expsyms should be a list of space-separated symbols to be *always*
+  # included in the symbol list
+  _LT_TAGVAR(include_expsyms, $1)=
+  # exclude_expsyms can be an extended regexp of symbols to exclude
+  # it will be wrapped by ` (' and `)$', so one must not match beginning or
+  # end of line.  Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
+  # as well as any symbol that contains `d'.
+  _LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*']
+  # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
+  # platforms (ab)use it in PIC code, but their linkers get confused if
+  # the symbol is explicitly referenced.  Since portable code cannot
+  # rely on this symbol name, it's probably fine to never include it in
+  # preloaded symbol tables.
+  # Exclude shared library initialization/finalization symbols.
+dnl Note also adjust exclude_expsyms for C++ above.
+  extract_expsyms_cmds=
 
-AC_LIBTOOL_CONFIG($1)
+  case $host_os in
+  cygwin* | mingw* | pw32* | cegcc*)
+    # FIXME: the MSVC++ port hasn't been tested in a loooong time
+    # When not using gcc, we currently assume that we are using
+    # Microsoft Visual C++.
+    if test "$GCC" != yes; then
+      with_gnu_ld=no
+    fi
+    ;;
+  interix*)
+    # we just hope/assume this is gcc and not c89 (= MSVC++)
+    with_gnu_ld=yes
+    ;;
+  openbsd*)
+    with_gnu_ld=no
+    ;;
+  linux* | k*bsd*-gnu)
+    _LT_TAGVAR(link_all_deplibs, $1)=no
+    ;;
+  esac
 
-AC_LANG_POP
-CC="$lt_save_CC"
-])# AC_LIBTOOL_LANG_F77_CONFIG
+  _LT_TAGVAR(ld_shlibs, $1)=yes
+  if test "$with_gnu_ld" = yes; then
+    # If archive_cmds runs LD, not CC, wlarc should be empty
+    wlarc='${wl}'
 
+    # Set some defaults for GNU ld with shared library support. These
+    # are reset later if shared libraries are not supported. Putting them
+    # here allows them to be overridden if necessary.
+    runpath_var=LD_RUN_PATH
+    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+    _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+    # ancient GNU ld didn't support --whole-archive et. al.
+    if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then
+      _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+    else
+      _LT_TAGVAR(whole_archive_flag_spec, $1)=
+    fi
+    supports_anon_versioning=no
+    case `$LD -v 2>&1` in
+      *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.10.*) ;; # catch versions < 2.11
+      *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
+      *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
+      *\ 2.11.*) ;; # other 2.11 versions
+      *) supports_anon_versioning=yes ;;
+    esac
 
-# AC_LIBTOOL_LANG_GCJ_CONFIG
-# --------------------------
-# Ensure that the configuration vars for the C compiler are
-# suitably defined.  Those variables are subsequently used by
-# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
-AC_DEFUN([AC_LIBTOOL_LANG_GCJ_CONFIG], [_LT_AC_LANG_GCJ_CONFIG(GCJ)])
-AC_DEFUN([_LT_AC_LANG_GCJ_CONFIG],
-[AC_LANG_SAVE
+    # See if GNU ld supports shared libraries.
+    case $host_os in
+    aix[[3-9]]*)
+      # On AIX/PPC, the GNU linker is very broken
+      if test "$host_cpu" != ia64; then
+	_LT_TAGVAR(ld_shlibs, $1)=no
+	cat <<_LT_EOF 1>&2
 
-# Source file extension for Java test sources.
-ac_ext=java
+*** Warning: the GNU linker, at least up to release 2.9.1, is reported
+*** to be unable to reliably create shared libraries on AIX.
+*** Therefore, libtool is disabling shared libraries support.  If you
+*** really care for shared libraries, you may want to modify your PATH
+*** so that a non-GNU linker is found, and then restart.
 
-# Object file extension for compiled Java test sources.
-objext=o
-_LT_AC_TAGVAR(objext, $1)=$objext
+_LT_EOF
+      fi
+      ;;
 
-# Code to be used in simple compile tests
-lt_simple_compile_test_code="class foo {}"
+    amigaos*)
+      case $host_cpu in
+      powerpc)
+            # see comment about AmigaOS4 .so support
+            _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+            _LT_TAGVAR(archive_expsym_cmds, $1)=''
+        ;;
+      m68k)
+            _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
+            _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+            _LT_TAGVAR(hardcode_minus_L, $1)=yes
+        ;;
+      esac
+      ;;
 
-# Code to be used in simple link tests
-lt_simple_link_test_code='public class conftest { public static void main(String[[]] argv) {}; }'
+    beos*)
+      if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+	_LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+	# Joseph Beckenbach <jrb3@best.com> says some releases of gcc
+	# support --undefined.  This deserves some investigation.  FIXME
+	_LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+      else
+	_LT_TAGVAR(ld_shlibs, $1)=no
+      fi
+      ;;
 
-# ltmain only uses $CC for tagged configurations so make sure $CC is set.
-_LT_AC_SYS_COMPILER
+    cygwin* | mingw* | pw32* | cegcc*)
+      # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
+      # as there is no search path for DLLs.
+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+      _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+      _LT_TAGVAR(always_export_symbols, $1)=no
+      _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+      _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/'\'' | $SED -e '\''/^[[AITW]][[ ]]/s/.*[[ ]]//'\'' | sort | uniq > $export_symbols'
 
-# save warnings/boilerplate of simple test code
-_LT_COMPILER_BOILERPLATE
-_LT_LINKER_BOILERPLATE
+      if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
+        _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+	# If the export-symbols file already is a .def file (1st line
+	# is EXPORTS), use it as is; otherwise, prepend...
+	_LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
+	  cp $export_symbols $output_objdir/$soname.def;
+	else
+	  echo EXPORTS > $output_objdir/$soname.def;
+	  cat $export_symbols >> $output_objdir/$soname.def;
+	fi~
+	$CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+      else
+	_LT_TAGVAR(ld_shlibs, $1)=no
+      fi
+      ;;
 
-# Allow CC to be a program name with arguments.
-lt_save_CC="$CC"
-CC=${GCJ-"gcj"}
-compiler=$CC
-_LT_AC_TAGVAR(compiler, $1)=$CC
-_LT_CC_BASENAME([$compiler])
-_LT_AC_TAGVAR(LD, $1)="$LD"
+    interix[[3-9]]*)
+      _LT_TAGVAR(hardcode_direct, $1)=no
+      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+      _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+      # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
+      # Instead, shared libraries are loaded at an image base (0x10000000 by
+      # default) and relocated if they conflict, which is a slow very memory
+      # consuming and fragmenting process.  To avoid this, we pick a random,
+      # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
+      # time.  Moving up from 0x10000000 also allows more sbrk(2) space.
+      _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+      _LT_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+      ;;
 
-# GCJ did not exist at the time GCC didn't implicitly link libc in.
-_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
+    gnu* | linux* | tpf* | k*bsd*-gnu)
+      tmp_diet=no
+      if test "$host_os" = linux-dietlibc; then
+	case $cc_basename in
+	  diet\ *) tmp_diet=yes;;	# linux-dietlibc with static linking (!diet-dyn)
+	esac
+      fi
+      if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \
+	 && test "$tmp_diet" = no
+      then
+	tmp_addflag=
+	tmp_sharedflag='-shared'
+	case $cc_basename,$host_cpu in
+        pgcc*)				# Portland Group C compiler
+	  _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
+	  tmp_addflag=' $pic_flag'
+	  ;;
+	pgf77* | pgf90* | pgf95*)	# Portland Group f77 and f90 compilers
+	  _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
+	  tmp_addflag=' $pic_flag -Mnomain' ;;
+	ecc*,ia64* | icc*,ia64*)	# Intel C compiler on ia64
+	  tmp_addflag=' -i_dynamic' ;;
+	efc*,ia64* | ifort*,ia64*)	# Intel Fortran compiler on ia64
+	  tmp_addflag=' -i_dynamic -nofor_main' ;;
+	ifc* | ifort*)			# Intel Fortran compiler
+	  tmp_addflag=' -nofor_main' ;;
+	lf95*)				# Lahey Fortran 8.1
+	  _LT_TAGVAR(whole_archive_flag_spec, $1)=
+	  tmp_sharedflag='--shared' ;;
+	xl[[cC]]*)			# IBM XL C 8.0 on PPC (deal with xlf below)
+	  tmp_sharedflag='-qmkshrobj'
+	  tmp_addflag= ;;
+	esac
+	case `$CC -V 2>&1 | sed 5q` in
+	*Sun\ C*)			# Sun C 5.9
+	  _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
+	  _LT_TAGVAR(compiler_needs_object, $1)=yes
+	  tmp_sharedflag='-G' ;;
+	*Sun\ F*)			# Sun Fortran 8.3
+	  tmp_sharedflag='-G' ;;
+	esac
+	_LT_TAGVAR(archive_cmds, $1)='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
 
-_LT_AC_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
+        if test "x$supports_anon_versioning" = xyes; then
+          _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~
+	    cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+	    echo "local: *; };" >> $output_objdir/$libname.ver~
+	    $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
+        fi
 
-AC_LIBTOOL_PROG_COMPILER_NO_RTTI($1)
-AC_LIBTOOL_PROG_COMPILER_PIC($1)
-AC_LIBTOOL_PROG_CC_C_O($1)
-AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1)
-AC_LIBTOOL_PROG_LD_SHLIBS($1)
-AC_LIBTOOL_SYS_DYNAMIC_LINKER($1)
-AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1)
+	case $cc_basename in
+	xlf*)
+	  # IBM XL Fortran 10.1 on PPC cannot create shared libs itself
+	  _LT_TAGVAR(whole_archive_flag_spec, $1)='--whole-archive$convenience --no-whole-archive'
+	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
+	  _LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='-rpath $libdir'
+	  _LT_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $compiler_flags -soname $soname -o $lib'
+	  if test "x$supports_anon_versioning" = xyes; then
+	    _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~
+	      cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+	      echo "local: *; };" >> $output_objdir/$libname.ver~
+	      $LD -shared $libobjs $deplibs $compiler_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib'
+	  fi
+	  ;;
+	esac
+      else
+        _LT_TAGVAR(ld_shlibs, $1)=no
+      fi
+      ;;
 
-AC_LIBTOOL_CONFIG($1)
+    netbsd* | netbsdelf*-gnu)
+      if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+	_LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
+	wlarc=
+      else
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+      fi
+      ;;
 
-AC_LANG_RESTORE
-CC="$lt_save_CC"
-])# AC_LIBTOOL_LANG_GCJ_CONFIG
+    solaris*)
+      if $LD -v 2>&1 | $GREP 'BFD 2\.8' > /dev/null; then
+	_LT_TAGVAR(ld_shlibs, $1)=no
+	cat <<_LT_EOF 1>&2
 
+*** Warning: The releases 2.8.* of the GNU linker cannot reliably
+*** create shared libraries on Solaris systems.  Therefore, libtool
+*** is disabling shared libraries support.  We urge you to upgrade GNU
+*** binutils to release 2.9.1 or newer.  Another option is to modify
+*** your PATH or compiler configuration so that the native linker is
+*** used, and then restart.
 
-# AC_LIBTOOL_LANG_RC_CONFIG
-# -------------------------
-# Ensure that the configuration vars for the Windows resource compiler are
-# suitably defined.  Those variables are subsequently used by
-# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
-AC_DEFUN([AC_LIBTOOL_LANG_RC_CONFIG], [_LT_AC_LANG_RC_CONFIG(RC)])
-AC_DEFUN([_LT_AC_LANG_RC_CONFIG],
-[AC_LANG_SAVE
-
-# Source file extension for RC test sources.
-ac_ext=rc
-
-# Object file extension for compiled RC test sources.
-objext=o
-_LT_AC_TAGVAR(objext, $1)=$objext
-
-# Code to be used in simple compile tests
-lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }'
-
-# Code to be used in simple link tests
-lt_simple_link_test_code="$lt_simple_compile_test_code"
-
-# ltmain only uses $CC for tagged configurations so make sure $CC is set.
-_LT_AC_SYS_COMPILER
-
-# save warnings/boilerplate of simple test code
-_LT_COMPILER_BOILERPLATE
-_LT_LINKER_BOILERPLATE
-
-# Allow CC to be a program name with arguments.
-lt_save_CC="$CC"
-CC=${RC-"windres"}
-compiler=$CC
-_LT_AC_TAGVAR(compiler, $1)=$CC
-_LT_CC_BASENAME([$compiler])
-_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
+_LT_EOF
+      elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+      else
+	_LT_TAGVAR(ld_shlibs, $1)=no
+      fi
+      ;;
 
-AC_LIBTOOL_CONFIG($1)
+    sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
+      case `$LD -v 2>&1` in
+        *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.1[[0-5]].*)
+	_LT_TAGVAR(ld_shlibs, $1)=no
+	cat <<_LT_EOF 1>&2
 
-AC_LANG_RESTORE
-CC="$lt_save_CC"
-])# AC_LIBTOOL_LANG_RC_CONFIG
+*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not
+*** reliably create shared libraries on SCO systems.  Therefore, libtool
+*** is disabling shared libraries support.  We urge you to upgrade GNU
+*** binutils to release 2.16.91.0.3 or newer.  Another option is to modify
+*** your PATH or compiler configuration so that the native linker is
+*** used, and then restart.
 
+_LT_EOF
+	;;
+	*)
+	  # For security reasons, it is highly recommended that you always
+	  # use absolute paths for naming shared libraries, and exclude the
+	  # DT_RUNPATH tag from executables and libraries.  But doing so
+	  # requires that you compile everything twice, which is a pain.
+	  if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+	    _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	    _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+	  else
+	    _LT_TAGVAR(ld_shlibs, $1)=no
+	  fi
+	;;
+      esac
+      ;;
 
-# AC_LIBTOOL_CONFIG([TAGNAME])
-# ----------------------------
-# If TAGNAME is not passed, then create an initial libtool script
-# with a default configuration from the untagged config vars.  Otherwise
-# add code to config.status for appending the configuration named by
-# TAGNAME from the matching tagged config vars.
-AC_DEFUN([AC_LIBTOOL_CONFIG],
-[# The else clause should only fire when bootstrapping the
-# libtool distribution, otherwise you forgot to ship ltmain.sh
-# with your package, and you will get complaints that there are
-# no rules to generate ltmain.sh.
-if test -f "$ltmain"; then
-  # See if we are running on zsh, and set the options which allow our commands through
-  # without removal of \ escapes.
-  if test -n "${ZSH_VERSION+set}" ; then
-    setopt NO_GLOB_SUBST
-  fi
-  # Now quote all the things that may contain metacharacters while being
-  # careful not to overquote the AC_SUBSTed values.  We take copies of the
-  # variables and quote the copies for generation of the libtool script.
-  for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \
-    SED SHELL STRIP \
-    libname_spec library_names_spec soname_spec extract_expsyms_cmds \
-    old_striplib striplib file_magic_cmd finish_cmds finish_eval \
-    deplibs_check_method reload_flag reload_cmds need_locks \
-    lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \
-    lt_cv_sys_global_symbol_to_c_name_address \
-    sys_lib_search_path_spec sys_lib_dlsearch_path_spec \
-    old_postinstall_cmds old_postuninstall_cmds \
-    _LT_AC_TAGVAR(compiler, $1) \
-    _LT_AC_TAGVAR(CC, $1) \
-    _LT_AC_TAGVAR(LD, $1) \
-    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1) \
-    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1) \
-    _LT_AC_TAGVAR(lt_prog_compiler_static, $1) \
-    _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) \
-    _LT_AC_TAGVAR(export_dynamic_flag_spec, $1) \
-    _LT_AC_TAGVAR(thread_safe_flag_spec, $1) \
-    _LT_AC_TAGVAR(whole_archive_flag_spec, $1) \
-    _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1) \
-    _LT_AC_TAGVAR(old_archive_cmds, $1) \
-    _LT_AC_TAGVAR(old_archive_from_new_cmds, $1) \
-    _LT_AC_TAGVAR(predep_objects, $1) \
-    _LT_AC_TAGVAR(postdep_objects, $1) \
-    _LT_AC_TAGVAR(predeps, $1) \
-    _LT_AC_TAGVAR(postdeps, $1) \
-    _LT_AC_TAGVAR(compiler_lib_search_path, $1) \
-    _LT_AC_TAGVAR(compiler_lib_search_dirs, $1) \
-    _LT_AC_TAGVAR(archive_cmds, $1) \
-    _LT_AC_TAGVAR(archive_expsym_cmds, $1) \
-    _LT_AC_TAGVAR(postinstall_cmds, $1) \
-    _LT_AC_TAGVAR(postuninstall_cmds, $1) \
-    _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1) \
-    _LT_AC_TAGVAR(allow_undefined_flag, $1) \
-    _LT_AC_TAGVAR(no_undefined_flag, $1) \
-    _LT_AC_TAGVAR(export_symbols_cmds, $1) \
-    _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) \
-    _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1) \
-    _LT_AC_TAGVAR(hardcode_libdir_separator, $1) \
-    _LT_AC_TAGVAR(hardcode_automatic, $1) \
-    _LT_AC_TAGVAR(module_cmds, $1) \
-    _LT_AC_TAGVAR(module_expsym_cmds, $1) \
-    _LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1) \
-    _LT_AC_TAGVAR(fix_srcfile_path, $1) \
-    _LT_AC_TAGVAR(exclude_expsyms, $1) \
-    _LT_AC_TAGVAR(include_expsyms, $1); do
-
-    case $var in
-    _LT_AC_TAGVAR(old_archive_cmds, $1) | \
-    _LT_AC_TAGVAR(old_archive_from_new_cmds, $1) | \
-    _LT_AC_TAGVAR(archive_cmds, $1) | \
-    _LT_AC_TAGVAR(archive_expsym_cmds, $1) | \
-    _LT_AC_TAGVAR(module_cmds, $1) | \
-    _LT_AC_TAGVAR(module_expsym_cmds, $1) | \
-    _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1) | \
-    _LT_AC_TAGVAR(export_symbols_cmds, $1) | \
-    extract_expsyms_cmds | reload_cmds | finish_cmds | \
-    postinstall_cmds | postuninstall_cmds | \
-    old_postinstall_cmds | old_postuninstall_cmds | \
-    sys_lib_search_path_spec | sys_lib_dlsearch_path_spec)
-      # Double-quote double-evaled strings.
-      eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\""
+    sunos4*)
+      _LT_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+      wlarc=
+      _LT_TAGVAR(hardcode_direct, $1)=yes
+      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
       ;;
+
     *)
-      eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\""
+      if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+      else
+	_LT_TAGVAR(ld_shlibs, $1)=no
+      fi
       ;;
     esac
-  done
 
-  case $lt_echo in
-  *'\[$]0 --fallback-echo"')
-    lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\[$]0 --fallback-echo"[$]/[$]0 --fallback-echo"/'`
-    ;;
-  esac
-
-ifelse([$1], [],
-  [cfgfile="${ofile}T"
-  trap "$rm \"$cfgfile\"; exit 1" 1 2 15
-  $rm -f "$cfgfile"
-  AC_MSG_NOTICE([creating $ofile])],
-  [cfgfile="$ofile"])
+    if test "$_LT_TAGVAR(ld_shlibs, $1)" = no; then
+      runpath_var=
+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
+      _LT_TAGVAR(export_dynamic_flag_spec, $1)=
+      _LT_TAGVAR(whole_archive_flag_spec, $1)=
+    fi
+  else
+    # PORTME fill in a description of your system's linker (not GNU ld)
+    case $host_os in
+    aix3*)
+      _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+      _LT_TAGVAR(always_export_symbols, $1)=yes
+      _LT_TAGVAR(archive_expsym_cmds, $1)='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
+      # Note: this linker hardcodes the directories in LIBPATH if there
+      # are no directories specified by -L.
+      _LT_TAGVAR(hardcode_minus_L, $1)=yes
+      if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then
+	# Neither direct hardcoding nor static linking is supported with a
+	# broken collect2.
+	_LT_TAGVAR(hardcode_direct, $1)=unsupported
+      fi
+      ;;
 
-  cat <<__EOF__ >> "$cfgfile"
-ifelse([$1], [],
-[#! $SHELL
+    aix[[4-9]]*)
+      if test "$host_cpu" = ia64; then
+	# On IA64, the linker does run time linking by default, so we don't
+	# have to do anything special.
+	aix_use_runtimelinking=no
+	exp_sym_flag='-Bexport'
+	no_entry_flag=""
+      else
+	# If we're using GNU nm, then we don't want the "-C" option.
+	# -C means demangle to AIX nm, but means don't demangle with GNU nm
+	if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
+	  _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+	else
+	  _LT_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+	fi
+	aix_use_runtimelinking=no
 
-# `$echo "$cfgfile" | sed 's%^.*/%%'` - Provide generalized library-building support services.
-# Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP)
-# NOTE: Changes made to this file will be lost: look at ltmain.sh.
-#
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008
-# Free Software Foundation, Inc.
-#
-# This file is part of GNU Libtool:
-# Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
-#
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
+	# Test if we are trying to use run time linking or normal
+	# AIX style linking. If -brtl is somewhere in LDFLAGS, we
+	# need to do runtime linking.
+	case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*)
+	  for ld_flag in $LDFLAGS; do
+	  if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
+	    aix_use_runtimelinking=yes
+	    break
+	  fi
+	  done
+	  ;;
+	esac
 
-# A sed program that does not truncate output.
-SED=$lt_SED
+	exp_sym_flag='-bexport'
+	no_entry_flag='-bnoentry'
+      fi
 
-# Sed that helps us avoid accidentally triggering echo(1) options like -n.
-Xsed="$SED -e 1s/^X//"
+      # When large executables or shared objects are built, AIX ld can
+      # have problems creating the table of contents.  If linking a library
+      # or program results in "error TOC overflow" add -mminimal-toc to
+      # CXXFLAGS/CFLAGS for g++/gcc.  In the cases where that is not
+      # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
 
-# The HP-UX ksh and POSIX shell print the target directory to stdout
-# if CDPATH is set.
-(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+      _LT_TAGVAR(archive_cmds, $1)=''
+      _LT_TAGVAR(hardcode_direct, $1)=yes
+      _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
+      _LT_TAGVAR(hardcode_libdir_separator, $1)=':'
+      _LT_TAGVAR(link_all_deplibs, $1)=yes
+      _LT_TAGVAR(file_list_spec, $1)='${wl}-f,'
 
-# The names of the tagged configurations supported by this script.
-available_tags=
+      if test "$GCC" = yes; then
+	case $host_os in aix4.[[012]]|aix4.[[012]].*)
+	# We only want to do this on AIX 4.2 and lower, the check
+	# below for broken collect2 doesn't work under 4.3+
+	  collect2name=`${CC} -print-prog-name=collect2`
+	  if test -f "$collect2name" &&
+	   strings "$collect2name" | $GREP resolve_lib_name >/dev/null
+	  then
+	  # We have reworked collect2
+	  :
+	  else
+	  # We have old collect2
+	  _LT_TAGVAR(hardcode_direct, $1)=unsupported
+	  # It fails to find uninstalled libraries when the uninstalled
+	  # path is not listed in the libpath.  Setting hardcode_minus_L
+	  # to unsupported forces relinking
+	  _LT_TAGVAR(hardcode_minus_L, $1)=yes
+	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+	  _LT_TAGVAR(hardcode_libdir_separator, $1)=
+	  fi
+	  ;;
+	esac
+	shared_flag='-shared'
+	if test "$aix_use_runtimelinking" = yes; then
+	  shared_flag="$shared_flag "'${wl}-G'
+	fi
+	_LT_TAGVAR(link_all_deplibs, $1)=no
+      else
+	# not using gcc
+	if test "$host_cpu" = ia64; then
+	# VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
+	# chokes on -Wl,-G. The following line is correct:
+	  shared_flag='-G'
+	else
+	  if test "$aix_use_runtimelinking" = yes; then
+	    shared_flag='${wl}-G'
+	  else
+	    shared_flag='${wl}-bM:SRE'
+	  fi
+	fi
+      fi
 
-# ### BEGIN LIBTOOL CONFIG],
-[# ### BEGIN LIBTOOL TAG CONFIG: $tagname])
+      _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-bexpall'
+      # It seems that -bexpall does not export symbols beginning with
+      # underscore (_), so it is better to generate a list of symbols to export.
+      _LT_TAGVAR(always_export_symbols, $1)=yes
+      if test "$aix_use_runtimelinking" = yes; then
+	# Warning - without using the other runtime loading flags (-brtl),
+	# -berok will link without error, but may produce a broken library.
+	_LT_TAGVAR(allow_undefined_flag, $1)='-berok'
+        # Determine the default libpath from the value encoded in an
+        # empty executable.
+        _LT_SYS_MODULE_PATH_AIX
+        _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
+        _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then $ECHO "X${wl}${allow_undefined_flag}" | $Xsed; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+      else
+	if test "$host_cpu" = ia64; then
+	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
+	  _LT_TAGVAR(allow_undefined_flag, $1)="-z nodefs"
+	  _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
+	else
+	 # Determine the default libpath from the value encoded in an
+	 # empty executable.
+	 _LT_SYS_MODULE_PATH_AIX
+	 _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
+	  # Warning - without using the other run time loading flags,
+	  # -berok will link without error, but may produce a broken library.
+	  _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
+	  _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
+	  # Exported symbols can be pulled into shared objects from archives
+	  _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
+	  _LT_TAGVAR(archive_cmds_need_lc, $1)=yes
+	  # This is similar to how AIX traditionally builds its shared libraries.
+	  _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
+	fi
+      fi
+      ;;
 
-# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
+    amigaos*)
+      case $host_cpu in
+      powerpc)
+            # see comment about AmigaOS4 .so support
+            _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+            _LT_TAGVAR(archive_expsym_cmds, $1)=''
+        ;;
+      m68k)
+            _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
+            _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+            _LT_TAGVAR(hardcode_minus_L, $1)=yes
+        ;;
+      esac
+      ;;
 
-# Shell to use when invoking shell scripts.
-SHELL=$lt_SHELL
+    bsdi[[45]]*)
+      _LT_TAGVAR(export_dynamic_flag_spec, $1)=-rdynamic
+      ;;
 
-# Whether or not to build shared libraries.
-build_libtool_libs=$enable_shared
+    cygwin* | mingw* | pw32* | cegcc*)
+      # When not using gcc, we currently assume that we are using
+      # Microsoft Visual C++.
+      # hardcode_libdir_flag_spec is actually meaningless, as there is
+      # no search path for DLLs.
+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' '
+      _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+      # Tell ltmain to make .lib files, not .a files.
+      libext=lib
+      # Tell ltmain to make .dll files, not .so files.
+      shrext_cmds=".dll"
+      # FIXME: Setting linknames here is a bad hack.
+      _LT_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `$ECHO "X$deplibs" | $Xsed -e '\''s/ -lc$//'\''` -link -dll~linknames='
+      # The linker will automatically build a .lib file if we build a DLL.
+      _LT_TAGVAR(old_archive_from_new_cmds, $1)='true'
+      # FIXME: Should let the user specify the lib program.
+      _LT_TAGVAR(old_archive_cmds, $1)='lib -OUT:$oldlib$oldobjs$old_deplibs'
+      _LT_TAGVAR(fix_srcfile_path, $1)='`cygpath -w "$srcfile"`'
+      _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+      ;;
 
-# Whether or not to build static libraries.
-build_old_libs=$enable_static
+    darwin* | rhapsody*)
+      _LT_DARWIN_LINKER_FEATURES($1)
+      ;;
 
-# Whether or not to add -lc for building shared libraries.
-build_libtool_need_lc=$_LT_AC_TAGVAR(archive_cmds_need_lc, $1)
+    dgux*)
+      _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+      ;;
 
-# Whether or not to disallow shared libs when runtime libs are static
-allow_libtool_libs_with_static_runtimes=$_LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)
+    freebsd1*)
+      _LT_TAGVAR(ld_shlibs, $1)=no
+      ;;
 
-# Whether or not to optimize for fast installation.
-fast_install=$enable_fast_install
+    # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
+    # support.  Future versions do this automatically, but an explicit c++rt0.o
+    # does not break anything, and helps significantly (at the cost of a little
+    # extra space).
+    freebsd2.2*)
+      _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+      _LT_TAGVAR(hardcode_direct, $1)=yes
+      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+      ;;
 
-# The host system.
-host_alias=$host_alias
-host=$host
-host_os=$host_os
+    # Unfortunately, older versions of FreeBSD 2 do not have this feature.
+    freebsd2*)
+      _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+      _LT_TAGVAR(hardcode_direct, $1)=yes
+      _LT_TAGVAR(hardcode_minus_L, $1)=yes
+      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+      ;;
 
-# The build system.
-build_alias=$build_alias
-build=$build
-build_os=$build_os
+    # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
+    freebsd* | dragonfly*)
+      _LT_TAGVAR(archive_cmds, $1)='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+      _LT_TAGVAR(hardcode_direct, $1)=yes
+      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+      ;;
 
-# An echo program that does not interpret backslashes.
-echo=$lt_echo
+    hpux9*)
+      if test "$GCC" = yes; then
+	_LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+      else
+	_LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+      fi
+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+      _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+      _LT_TAGVAR(hardcode_direct, $1)=yes
 
-# The archiver.
-AR=$lt_AR
-AR_FLAGS=$lt_AR_FLAGS
+      # hardcode_minus_L: Not really in the search PATH,
+      # but as the default location of the library.
+      _LT_TAGVAR(hardcode_minus_L, $1)=yes
+      _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+      ;;
 
-# A C compiler.
-LTCC=$lt_LTCC
+    hpux10*)
+      if test "$GCC" = yes -a "$with_gnu_ld" = no; then
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+      else
+	_LT_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
+      fi
+      if test "$with_gnu_ld" = no; then
+	_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+	_LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='+b $libdir'
+	_LT_TAGVAR(hardcode_libdir_separator, $1)=:
+	_LT_TAGVAR(hardcode_direct, $1)=yes
+	_LT_TAGVAR(hardcode_direct_absolute, $1)=yes
+	_LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+	# hardcode_minus_L: Not really in the search PATH,
+	# but as the default location of the library.
+	_LT_TAGVAR(hardcode_minus_L, $1)=yes
+      fi
+      ;;
 
-# LTCC compiler flags.
-LTCFLAGS=$lt_LTCFLAGS
+    hpux11*)
+      if test "$GCC" = yes -a "$with_gnu_ld" = no; then
+	case $host_cpu in
+	hppa*64*)
+	  _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	ia64*)
+	  _LT_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	*)
+	  _LT_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	esac
+      else
+	case $host_cpu in
+	hppa*64*)
+	  _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	ia64*)
+	  _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	*)
+	  _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	esac
+      fi
+      if test "$with_gnu_ld" = no; then
+	_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+	_LT_TAGVAR(hardcode_libdir_separator, $1)=:
 
-# A language-specific compiler.
-CC=$lt_[]_LT_AC_TAGVAR(compiler, $1)
+	case $host_cpu in
+	hppa*64*|ia64*)
+	  _LT_TAGVAR(hardcode_direct, $1)=no
+	  _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+	  ;;
+	*)
+	  _LT_TAGVAR(hardcode_direct, $1)=yes
+	  _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
+	  _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
 
-# Is the compiler the GNU C compiler?
-with_gcc=$_LT_AC_TAGVAR(GCC, $1)
+	  # hardcode_minus_L: Not really in the search PATH,
+	  # but as the default location of the library.
+	  _LT_TAGVAR(hardcode_minus_L, $1)=yes
+	  ;;
+	esac
+      fi
+      ;;
 
-# An ERE matcher.
-EGREP=$lt_EGREP
+    irix5* | irix6* | nonstopux*)
+      if test "$GCC" = yes; then
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+	# Try to use the -exported_symbol ld option, if it does not
+	# work, assume that -exports_file does not work either and
+	# implicitly export all symbols.
+        save_LDFLAGS="$LDFLAGS"
+        LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null"
+        AC_LINK_IFELSE(int foo(void) {},
+          _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib'
+        )
+        LDFLAGS="$save_LDFLAGS"
+      else
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
+	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib'
+      fi
+      _LT_TAGVAR(archive_cmds_need_lc, $1)='no'
+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+      _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+      _LT_TAGVAR(inherit_rpath, $1)=yes
+      _LT_TAGVAR(link_all_deplibs, $1)=yes
+      ;;
 
-# The linker used to build libraries.
-LD=$lt_[]_LT_AC_TAGVAR(LD, $1)
-
-# Whether we need hard or soft links.
-LN_S=$lt_LN_S
-
-# A BSD-compatible nm program.
-NM=$lt_NM
-
-# A symbol stripping program
-STRIP=$lt_STRIP
-
-# Used to examine libraries when file_magic_cmd begins "file"
-MAGIC_CMD=$MAGIC_CMD
+    netbsd* | netbsdelf*-gnu)
+      if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+	_LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'  # a.out
+      else
+	_LT_TAGVAR(archive_cmds, $1)='$LD -shared -o $lib $libobjs $deplibs $linker_flags'      # ELF
+      fi
+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+      _LT_TAGVAR(hardcode_direct, $1)=yes
+      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+      ;;
 
-# Used on cygwin: DLL creation program.
-DLLTOOL="$DLLTOOL"
+    newsos6)
+      _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      _LT_TAGVAR(hardcode_direct, $1)=yes
+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+      _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+      ;;
 
-# Used on cygwin: object dumper.
-OBJDUMP="$OBJDUMP"
+    *nto* | *qnx*)
+      ;;
 
-# Used on cygwin: assembler.
-AS="$AS"
+    openbsd*)
+      if test -f /usr/libexec/ld.so; then
+	_LT_TAGVAR(hardcode_direct, $1)=yes
+	_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+	_LT_TAGVAR(hardcode_direct_absolute, $1)=yes
+	if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+	  _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+	  _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
+	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+	  _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+	else
+	  case $host_os in
+	   openbsd[[01]].* | openbsd2.[[0-7]] | openbsd2.[[0-7]].*)
+	     _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+	     _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+	     ;;
+	   *)
+	     _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+	     _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+	     ;;
+	  esac
+	fi
+      else
+	_LT_TAGVAR(ld_shlibs, $1)=no
+      fi
+      ;;
 
-# The name of the directory that contains temporary libtool files.
-objdir=$objdir
+    os2*)
+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+      _LT_TAGVAR(hardcode_minus_L, $1)=yes
+      _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+      _LT_TAGVAR(archive_cmds, $1)='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$ECHO DATA >> $output_objdir/$libname.def~$ECHO " SINGLE NONSHARED" >> $output_objdir/$libname.def~$ECHO EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
+      _LT_TAGVAR(old_archive_from_new_cmds, $1)='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
+      ;;
 
-# How to create reloadable object files.
-reload_flag=$lt_reload_flag
-reload_cmds=$lt_reload_cmds
+    osf3*)
+      if test "$GCC" = yes; then
+	_LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+      else
+	_LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
+      fi
+      _LT_TAGVAR(archive_cmds_need_lc, $1)='no'
+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+      _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+      ;;
 
-# How to pass a linker flag through the compiler.
-wl=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)
+    osf4* | osf5*)	# as osf3* with the addition of -msym flag
+      if test "$GCC" = yes; then
+	_LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+	_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+      else
+	_LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
+	_LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~
+	$CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp'
 
-# Object file suffix (normally "o").
-objext="$ac_objext"
+	# Both c and cxx compiler support -rpath directly
+	_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
+      fi
+      _LT_TAGVAR(archive_cmds_need_lc, $1)='no'
+      _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+      ;;
 
-# Old archive suffix (normally "a").
-libext="$libext"
+    solaris*)
+      _LT_TAGVAR(no_undefined_flag, $1)=' -z defs'
+      if test "$GCC" = yes; then
+	wlarc='${wl}'
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	_LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+	  $CC -shared ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
+      else
+	case `$CC -V 2>&1` in
+	*"Compilers 5.0"*)
+	  wlarc=''
+	  _LT_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	  _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+	  $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp'
+	  ;;
+	*)
+	  wlarc='${wl}'
+	  _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $compiler_flags'
+	  _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+	  $CC -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
+	  ;;
+	esac
+      fi
+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+      case $host_os in
+      solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
+      *)
+	# The compiler driver will combine and reorder linker options,
+	# but understands `-z linker_flag'.  GCC discards it without `$wl',
+	# but is careful enough not to reorder.
+	# Supported since Solaris 2.6 (maybe 2.5.1?)
+	if test "$GCC" = yes; then
+	  _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
+	else
+	  _LT_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract'
+	fi
+	;;
+      esac
+      _LT_TAGVAR(link_all_deplibs, $1)=yes
+      ;;
 
-# Shared library suffix (normally ".so").
-shrext_cmds='$shrext_cmds'
+    sunos4*)
+      if test "x$host_vendor" = xsequent; then
+	# Use $CC to link under sequent, because it throws in some extra .o
+	# files that make .init and .fini sections work.
+	_LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
+      else
+	_LT_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
+      fi
+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+      _LT_TAGVAR(hardcode_direct, $1)=yes
+      _LT_TAGVAR(hardcode_minus_L, $1)=yes
+      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+      ;;
 
-# Executable file suffix (normally "").
-exeext="$exeext"
+    sysv4)
+      case $host_vendor in
+	sni)
+	  _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	  _LT_TAGVAR(hardcode_direct, $1)=yes # is this really true???
+	;;
+	siemens)
+	  ## LD is ld it makes a PLAMLIB
+	  ## CC just makes a GrossModule.
+	  _LT_TAGVAR(archive_cmds, $1)='$LD -G -o $lib $libobjs $deplibs $linker_flags'
+	  _LT_TAGVAR(reload_cmds, $1)='$CC -r -o $output$reload_objs'
+	  _LT_TAGVAR(hardcode_direct, $1)=no
+        ;;
+	motorola)
+	  _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	  _LT_TAGVAR(hardcode_direct, $1)=no #Motorola manual says yes, but my tests say they lie
+	;;
+      esac
+      runpath_var='LD_RUN_PATH'
+      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+      ;;
 
-# Additional compiler flags for building library objects.
-pic_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)
-pic_mode=$pic_mode
+    sysv4.3*)
+      _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+      _LT_TAGVAR(export_dynamic_flag_spec, $1)='-Bexport'
+      ;;
 
-# What is the maximum length of a command?
-max_cmd_len=$lt_cv_sys_max_cmd_len
+    sysv4*MP*)
+      if test -d /usr/nec; then
+	_LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+	runpath_var=LD_RUN_PATH
+	hardcode_runpath_var=yes
+	_LT_TAGVAR(ld_shlibs, $1)=yes
+      fi
+      ;;
 
-# Does compiler simultaneously support -c and -o options?
-compiler_c_o=$lt_[]_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)
+    sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*)
+      _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
+      _LT_TAGVAR(archive_cmds_need_lc, $1)=no
+      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+      runpath_var='LD_RUN_PATH'
 
-# Must we lock files when doing compilation?
-need_locks=$lt_need_locks
+      if test "$GCC" = yes; then
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+      else
+	_LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+      fi
+      ;;
 
-# Do we need the lib prefix for modules?
-need_lib_prefix=$need_lib_prefix
+    sysv5* | sco3.2v5* | sco5v6*)
+      # Note: We can NOT use -z defs as we might desire, because we do not
+      # link with -lc, and that would cause any symbols used from libc to
+      # always be unresolved, which means just about no library would
+      # ever link correctly.  If we're not using GNU ld we use -z text
+      # though, which does catch some bad symbols but isn't as heavy-handed
+      # as -z defs.
+      _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
+      _LT_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs'
+      _LT_TAGVAR(archive_cmds_need_lc, $1)=no
+      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R,$libdir'
+      _LT_TAGVAR(hardcode_libdir_separator, $1)=':'
+      _LT_TAGVAR(link_all_deplibs, $1)=yes
+      _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport'
+      runpath_var='LD_RUN_PATH'
 
-# Do we need a version for libraries?
-need_version=$need_version
+      if test "$GCC" = yes; then
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+      else
+	_LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+      fi
+      ;;
 
-# Whether dlopen is supported.
-dlopen_support=$enable_dlopen
+    uts4*)
+      _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+      ;;
 
-# Whether dlopen of programs is supported.
-dlopen_self=$enable_dlopen_self
+    *)
+      _LT_TAGVAR(ld_shlibs, $1)=no
+      ;;
+    esac
 
-# Whether dlopen of statically linked programs is supported.
-dlopen_self_static=$enable_dlopen_self_static
+    if test x$host_vendor = xsni; then
+      case $host in
+      sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
+	_LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Blargedynsym'
+	;;
+      esac
+    fi
+  fi
+])
+AC_MSG_RESULT([$_LT_TAGVAR(ld_shlibs, $1)])
+test "$_LT_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no
 
-# Compiler flag to prevent dynamic linking.
-link_static_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_static, $1)
+_LT_TAGVAR(with_gnu_ld, $1)=$with_gnu_ld
 
-# Compiler flag to turn off builtin functions.
-no_builtin_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)
+_LT_DECL([], [libext], [0], [Old archive suffix (normally "a")])dnl
+_LT_DECL([], [shrext_cmds], [1], [Shared library suffix (normally ".so")])dnl
+_LT_DECL([], [extract_expsyms_cmds], [2],
+    [The commands to extract the exported symbol list from a shared archive])
 
-# Compiler flag to allow reflexive dlopens.
-export_dynamic_flag_spec=$lt_[]_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)
+#
+# Do we need to explicitly link libc?
+#
+case "x$_LT_TAGVAR(archive_cmds_need_lc, $1)" in
+x|xyes)
+  # Assume -lc should be added
+  _LT_TAGVAR(archive_cmds_need_lc, $1)=yes
 
-# Compiler flag to generate shared objects directly from archives.
-whole_archive_flag_spec=$lt_[]_LT_AC_TAGVAR(whole_archive_flag_spec, $1)
+  if test "$enable_shared" = yes && test "$GCC" = yes; then
+    case $_LT_TAGVAR(archive_cmds, $1) in
+    *'~'*)
+      # FIXME: we may have to deal with multi-command sequences.
+      ;;
+    '$CC '*)
+      # Test whether the compiler implicitly links with -lc since on some
+      # systems, -lgcc has to come before -lc. If gcc already passes -lc
+      # to ld, don't add -lc before -lgcc.
+      AC_MSG_CHECKING([whether -lc should be explicitly linked in])
+      $RM conftest*
+      echo "$lt_simple_compile_test_code" > conftest.$ac_ext
 
-# Compiler flag to generate thread-safe objects.
-thread_safe_flag_spec=$lt_[]_LT_AC_TAGVAR(thread_safe_flag_spec, $1)
+      if AC_TRY_EVAL(ac_compile) 2>conftest.err; then
+        soname=conftest
+        lib=conftest
+        libobjs=conftest.$ac_objext
+        deplibs=
+        wl=$_LT_TAGVAR(lt_prog_compiler_wl, $1)
+	pic_flag=$_LT_TAGVAR(lt_prog_compiler_pic, $1)
+        compiler_flags=-v
+        linker_flags=-v
+        verstring=
+        output_objdir=.
+        libname=conftest
+        lt_save_allow_undefined_flag=$_LT_TAGVAR(allow_undefined_flag, $1)
+        _LT_TAGVAR(allow_undefined_flag, $1)=
+        if AC_TRY_EVAL(_LT_TAGVAR(archive_cmds, $1) 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1)
+        then
+	  _LT_TAGVAR(archive_cmds_need_lc, $1)=no
+        else
+	  _LT_TAGVAR(archive_cmds_need_lc, $1)=yes
+        fi
+        _LT_TAGVAR(allow_undefined_flag, $1)=$lt_save_allow_undefined_flag
+      else
+        cat conftest.err 1>&5
+      fi
+      $RM conftest*
+      AC_MSG_RESULT([$_LT_TAGVAR(archive_cmds_need_lc, $1)])
+      ;;
+    esac
+  fi
+  ;;
+esac
 
-# Library versioning type.
-version_type=$version_type
+_LT_TAGDECL([build_libtool_need_lc], [archive_cmds_need_lc], [0],
+    [Whether or not to add -lc for building shared libraries])
+_LT_TAGDECL([allow_libtool_libs_with_static_runtimes],
+    [enable_shared_with_static_runtimes], [0],
+    [Whether or not to disallow shared libs when runtime libs are static])
+_LT_TAGDECL([], [export_dynamic_flag_spec], [1],
+    [Compiler flag to allow reflexive dlopens])
+_LT_TAGDECL([], [whole_archive_flag_spec], [1],
+    [Compiler flag to generate shared objects directly from archives])
+_LT_TAGDECL([], [compiler_needs_object], [1],
+    [Whether the compiler copes with passing no objects directly])
+_LT_TAGDECL([], [old_archive_from_new_cmds], [2],
+    [Create an old-style archive from a shared archive])
+_LT_TAGDECL([], [old_archive_from_expsyms_cmds], [2],
+    [Create a temporary old-style archive to link instead of a shared archive])
+_LT_TAGDECL([], [archive_cmds], [2], [Commands used to build a shared archive])
+_LT_TAGDECL([], [archive_expsym_cmds], [2])
+_LT_TAGDECL([], [module_cmds], [2],
+    [Commands used to build a loadable module if different from building
+    a shared archive.])
+_LT_TAGDECL([], [module_expsym_cmds], [2])
+_LT_TAGDECL([], [with_gnu_ld], [1],
+    [Whether we are building with GNU ld or not])
+_LT_TAGDECL([], [allow_undefined_flag], [1],
+    [Flag that allows shared libraries with undefined symbols to be built])
+_LT_TAGDECL([], [no_undefined_flag], [1],
+    [Flag that enforces no undefined symbols])
+_LT_TAGDECL([], [hardcode_libdir_flag_spec], [1],
+    [Flag to hardcode $libdir into a binary during linking.
+    This must work even if $libdir does not exist])
+_LT_TAGDECL([], [hardcode_libdir_flag_spec_ld], [1],
+    [[If ld is used when linking, flag to hardcode $libdir into a binary
+    during linking.  This must work even if $libdir does not exist]])
+_LT_TAGDECL([], [hardcode_libdir_separator], [1],
+    [Whether we need a single "-rpath" flag with a separated argument])
+_LT_TAGDECL([], [hardcode_direct], [0],
+    [Set to "yes" if using DIR/libNAME${shared_ext} during linking hardcodes
+    DIR into the resulting binary])
+_LT_TAGDECL([], [hardcode_direct_absolute], [0],
+    [Set to "yes" if using DIR/libNAME${shared_ext} during linking hardcodes
+    DIR into the resulting binary and the resulting library dependency is
+    "absolute", i.e impossible to change by setting ${shlibpath_var} if the
+    library is relocated])
+_LT_TAGDECL([], [hardcode_minus_L], [0],
+    [Set to "yes" if using the -LDIR flag during linking hardcodes DIR
+    into the resulting binary])
+_LT_TAGDECL([], [hardcode_shlibpath_var], [0],
+    [Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR
+    into the resulting binary])
+_LT_TAGDECL([], [hardcode_automatic], [0],
+    [Set to "yes" if building a shared library automatically hardcodes DIR
+    into the library and all subsequent libraries and executables linked
+    against it])
+_LT_TAGDECL([], [inherit_rpath], [0],
+    [Set to yes if linker adds runtime paths of dependent libraries
+    to runtime path list])
+_LT_TAGDECL([], [link_all_deplibs], [0],
+    [Whether libtool must link a program against all its dependency libraries])
+_LT_TAGDECL([], [fix_srcfile_path], [1],
+    [Fix the shell variable $srcfile for the compiler])
+_LT_TAGDECL([], [always_export_symbols], [0],
+    [Set to "yes" if exported symbols are required])
+_LT_TAGDECL([], [export_symbols_cmds], [2],
+    [The commands to list exported symbols])
+_LT_TAGDECL([], [exclude_expsyms], [1],
+    [Symbols that should not be listed in the preloaded symbols])
+_LT_TAGDECL([], [include_expsyms], [1],
+    [Symbols that must always be exported])
+_LT_TAGDECL([], [prelink_cmds], [2],
+    [Commands necessary for linking programs (against libraries) with templates])
+_LT_TAGDECL([], [file_list_spec], [1],
+    [Specify filename containing input files])
+dnl FIXME: Not yet implemented
+dnl _LT_TAGDECL([], [thread_safe_flag_spec], [1],
+dnl    [Compiler flag to generate thread safe objects])
+])# _LT_LINKER_SHLIBS
 
-# Format of library name prefix.
-libname_spec=$lt_libname_spec
 
-# List of archive names.  First name is the real one, the rest are links.
-# The last name is the one that the linker finds with -lNAME.
-library_names_spec=$lt_library_names_spec
+# _LT_LANG_C_CONFIG([TAG])
+# ------------------------
+# Ensure that the configuration variables for a C compiler are suitably
+# defined.  These variables are subsequently used by _LT_CONFIG to write
+# the compiler configuration to `libtool'.
+m4_defun([_LT_LANG_C_CONFIG],
+[m4_require([_LT_DECL_EGREP])dnl
+lt_save_CC="$CC"
+AC_LANG_PUSH(C)
 
-# The coded name of the library, if different from the real name.
-soname_spec=$lt_soname_spec
+# Source file extension for C test sources.
+ac_ext=c
 
-# Commands used to build and install an old-style archive.
-RANLIB=$lt_RANLIB
-old_archive_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_cmds, $1)
-old_postinstall_cmds=$lt_old_postinstall_cmds
-old_postuninstall_cmds=$lt_old_postuninstall_cmds
+# Object file extension for compiled C test sources.
+objext=o
+_LT_TAGVAR(objext, $1)=$objext
 
-# Create an old-style archive from a shared archive.
-old_archive_from_new_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_from_new_cmds, $1)
+# Code to be used in simple compile tests
+lt_simple_compile_test_code="int some_variable = 0;"
 
-# Create a temporary old-style archive to link instead of a shared archive.
-old_archive_from_expsyms_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1)
+# Code to be used in simple link tests
+lt_simple_link_test_code='int main(){return(0);}'
 
-# Commands used to build and install a shared archive.
-archive_cmds=$lt_[]_LT_AC_TAGVAR(archive_cmds, $1)
-archive_expsym_cmds=$lt_[]_LT_AC_TAGVAR(archive_expsym_cmds, $1)
-postinstall_cmds=$lt_postinstall_cmds
-postuninstall_cmds=$lt_postuninstall_cmds
+_LT_TAG_COMPILER
+# Save the default compiler, since it gets overwritten when the other
+# tags are being tested, and _LT_TAGVAR(compiler, []) is a NOP.
+compiler_DEFAULT=$CC
 
-# Commands used to build a loadable module (assumed same as above if empty)
-module_cmds=$lt_[]_LT_AC_TAGVAR(module_cmds, $1)
-module_expsym_cmds=$lt_[]_LT_AC_TAGVAR(module_expsym_cmds, $1)
+# save warnings/boilerplate of simple test code
+_LT_COMPILER_BOILERPLATE
+_LT_LINKER_BOILERPLATE
 
-# Commands to strip libraries.
-old_striplib=$lt_old_striplib
-striplib=$lt_striplib
+if test -n "$compiler"; then
+  _LT_COMPILER_NO_RTTI($1)
+  _LT_COMPILER_PIC($1)
+  _LT_COMPILER_C_O($1)
+  _LT_COMPILER_FILE_LOCKS($1)
+  _LT_LINKER_SHLIBS($1)
+  _LT_SYS_DYNAMIC_LINKER($1)
+  _LT_LINKER_HARDCODE_LIBPATH($1)
+  LT_SYS_DLOPEN_SELF
+  _LT_CMD_STRIPLIB
+
+  # Report which library types will actually be built
+  AC_MSG_CHECKING([if libtool supports shared libraries])
+  AC_MSG_RESULT([$can_build_shared])
 
-# Dependencies to place before the objects being linked to create a
-# shared library.
-predep_objects=$lt_[]_LT_AC_TAGVAR(predep_objects, $1)
+  AC_MSG_CHECKING([whether to build shared libraries])
+  test "$can_build_shared" = "no" && enable_shared=no
 
-# Dependencies to place after the objects being linked to create a
-# shared library.
-postdep_objects=$lt_[]_LT_AC_TAGVAR(postdep_objects, $1)
+  # On AIX, shared libraries and static libraries use the same namespace, and
+  # are all built from PIC.
+  case $host_os in
+  aix3*)
+    test "$enable_shared" = yes && enable_static=no
+    if test -n "$RANLIB"; then
+      archive_cmds="$archive_cmds~\$RANLIB \$lib"
+      postinstall_cmds='$RANLIB $lib'
+    fi
+    ;;
 
-# Dependencies to place before the objects being linked to create a
-# shared library.
-predeps=$lt_[]_LT_AC_TAGVAR(predeps, $1)
+  aix[[4-9]]*)
+    if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
+      test "$enable_shared" = yes && enable_static=no
+    fi
+    ;;
+  esac
+  AC_MSG_RESULT([$enable_shared])
 
-# Dependencies to place after the objects being linked to create a
-# shared library.
-postdeps=$lt_[]_LT_AC_TAGVAR(postdeps, $1)
+  AC_MSG_CHECKING([whether to build static libraries])
+  # Make sure either enable_shared or enable_static is yes.
+  test "$enable_shared" = yes || enable_static=yes
+  AC_MSG_RESULT([$enable_static])
 
-# The directories searched by this compiler when creating a shared
-# library
-compiler_lib_search_dirs=$lt_[]_LT_AC_TAGVAR(compiler_lib_search_dirs, $1)
+  _LT_CONFIG($1)
+fi
+AC_LANG_POP
+CC="$lt_save_CC"
+])# _LT_LANG_C_CONFIG
 
-# The library search path used internally by the compiler when linking
-# a shared library.
-compiler_lib_search_path=$lt_[]_LT_AC_TAGVAR(compiler_lib_search_path, $1)
 
-# Method to check whether dependent libraries are shared objects.
-deplibs_check_method=$lt_deplibs_check_method
+# _LT_PROG_CXX
+# ------------
+# Since AC_PROG_CXX is broken, in that it returns g++ if there is no c++
+# compiler, we have our own version here.
+m4_defun([_LT_PROG_CXX],
+[
+pushdef([AC_MSG_ERROR], [_lt_caught_CXX_error=yes])
+AC_PROG_CXX
+if test -n "$CXX" && ( test "X$CXX" != "Xno" &&
+    ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) ||
+    (test "X$CXX" != "Xg++"))) ; then
+  AC_PROG_CXXCPP
+else
+  _lt_caught_CXX_error=yes
+fi
+popdef([AC_MSG_ERROR])
+])# _LT_PROG_CXX
 
-# Command to use when deplibs_check_method == file_magic.
-file_magic_cmd=$lt_file_magic_cmd
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([_LT_PROG_CXX], [])
 
-# Flag that allows shared libraries with undefined symbols to be built.
-allow_undefined_flag=$lt_[]_LT_AC_TAGVAR(allow_undefined_flag, $1)
 
-# Flag that forces no undefined symbols.
-no_undefined_flag=$lt_[]_LT_AC_TAGVAR(no_undefined_flag, $1)
+# _LT_LANG_CXX_CONFIG([TAG])
+# --------------------------
+# Ensure that the configuration variables for a C++ compiler are suitably
+# defined.  These variables are subsequently used by _LT_CONFIG to write
+# the compiler configuration to `libtool'.
+m4_defun([_LT_LANG_CXX_CONFIG],
+[AC_REQUIRE([_LT_PROG_CXX])dnl
+m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+m4_require([_LT_DECL_EGREP])dnl
+
+AC_LANG_PUSH(C++)
+_LT_TAGVAR(archive_cmds_need_lc, $1)=no
+_LT_TAGVAR(allow_undefined_flag, $1)=
+_LT_TAGVAR(always_export_symbols, $1)=no
+_LT_TAGVAR(archive_expsym_cmds, $1)=
+_LT_TAGVAR(compiler_needs_object, $1)=no
+_LT_TAGVAR(export_dynamic_flag_spec, $1)=
+_LT_TAGVAR(hardcode_direct, $1)=no
+_LT_TAGVAR(hardcode_direct_absolute, $1)=no
+_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
+_LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
+_LT_TAGVAR(hardcode_libdir_separator, $1)=
+_LT_TAGVAR(hardcode_minus_L, $1)=no
+_LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
+_LT_TAGVAR(hardcode_automatic, $1)=no
+_LT_TAGVAR(inherit_rpath, $1)=no
+_LT_TAGVAR(module_cmds, $1)=
+_LT_TAGVAR(module_expsym_cmds, $1)=
+_LT_TAGVAR(link_all_deplibs, $1)=unknown
+_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
+_LT_TAGVAR(no_undefined_flag, $1)=
+_LT_TAGVAR(whole_archive_flag_spec, $1)=
+_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
 
-# Commands used to finish a libtool library installation in a directory.
-finish_cmds=$lt_finish_cmds
+# Source file extension for C++ test sources.
+ac_ext=cpp
 
-# Same as above, but a single script fragment to be evaled but not shown.
-finish_eval=$lt_finish_eval
+# Object file extension for compiled C++ test sources.
+objext=o
+_LT_TAGVAR(objext, $1)=$objext
 
-# Take the output of nm and produce a listing of raw symbols and C names.
-global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe
+# No sense in running all these tests if we already determined that
+# the CXX compiler isn't working.  Some variables (like enable_shared)
+# are currently assumed to apply to all compilers on this platform,
+# and will be corrupted by setting them based on a non-working compiler.
+if test "$_lt_caught_CXX_error" != yes; then
+  # Code to be used in simple compile tests
+  lt_simple_compile_test_code="int some_variable = 0;"
+
+  # Code to be used in simple link tests
+  lt_simple_link_test_code='int main(int, char *[[]]) { return(0); }'
+
+  # ltmain only uses $CC for tagged configurations so make sure $CC is set.
+  _LT_TAG_COMPILER
+
+  # save warnings/boilerplate of simple test code
+  _LT_COMPILER_BOILERPLATE
+  _LT_LINKER_BOILERPLATE
+
+  # Allow CC to be a program name with arguments.
+  lt_save_CC=$CC
+  lt_save_LD=$LD
+  lt_save_GCC=$GCC
+  GCC=$GXX
+  lt_save_with_gnu_ld=$with_gnu_ld
+  lt_save_path_LD=$lt_cv_path_LD
+  if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then
+    lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx
+  else
+    $as_unset lt_cv_prog_gnu_ld
+  fi
+  if test -n "${lt_cv_path_LDCXX+set}"; then
+    lt_cv_path_LD=$lt_cv_path_LDCXX
+  else
+    $as_unset lt_cv_path_LD
+  fi
+  test -z "${LDCXX+set}" || LD=$LDCXX
+  CC=${CXX-"c++"}
+  compiler=$CC
+  _LT_TAGVAR(compiler, $1)=$CC
+  _LT_CC_BASENAME([$compiler])
 
-# Transform the output of nm in a proper C declaration
-global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl
+  if test -n "$compiler"; then
+    # We don't want -fno-exception when compiling C++ code, so set the
+    # no_builtin_flag separately
+    if test "$GXX" = yes; then
+      _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin'
+    else
+      _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=
+    fi
 
-# Transform the output of nm in a C name address pair
-global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
+    if test "$GXX" = yes; then
+      # Set up default GNU C++ configuration
 
-# This is the shared library runtime path variable.
-runpath_var=$runpath_var
+      LT_PATH_LD
 
-# This is the shared library path variable.
-shlibpath_var=$shlibpath_var
+      # Check if GNU C++ uses GNU ld as the underlying linker, since the
+      # archiving commands below assume that GNU ld is being used.
+      if test "$with_gnu_ld" = yes; then
+        _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
+        _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+
+        _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+        _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+
+        # If archive_cmds runs LD, not CC, wlarc should be empty
+        # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to
+        #     investigate it a little bit more. (MM)
+        wlarc='${wl}'
+
+        # ancient GNU ld didn't support --whole-archive et. al.
+        if eval "`$CC -print-prog-name=ld` --help 2>&1" |
+	  $GREP 'no-whole-archive' > /dev/null; then
+          _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+        else
+          _LT_TAGVAR(whole_archive_flag_spec, $1)=
+        fi
+      else
+        with_gnu_ld=no
+        wlarc=
 
-# Is shlibpath searched before the hard-coded library search path?
-shlibpath_overrides_runpath=$shlibpath_overrides_runpath
+        # A generic and very simple default shared library creation
+        # command for GNU C++ for the case where it uses the native
+        # linker, instead of GNU ld.  If possible, this setting should
+        # overridden to take advantage of the native linker features on
+        # the platform it is being used on.
+        _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
+      fi
 
-# How to hardcode a shared library path into an executable.
-hardcode_action=$_LT_AC_TAGVAR(hardcode_action, $1)
+      # Commands to make compiler produce verbose output that lists
+      # what "hidden" libraries, object files and flags are used when
+      # linking a shared library.
+      output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"'
 
-# Whether we should hardcode library paths into libraries.
-hardcode_into_libs=$hardcode_into_libs
+    else
+      GXX=no
+      with_gnu_ld=no
+      wlarc=
+    fi
 
-# Flag to hardcode \$libdir into a binary during linking.
-# This must work even if \$libdir does not exist.
-hardcode_libdir_flag_spec=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)
+    # PORTME: fill in a description of your system's C++ link characteristics
+    AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries])
+    _LT_TAGVAR(ld_shlibs, $1)=yes
+    case $host_os in
+      aix3*)
+        # FIXME: insert proper C++ library support
+        _LT_TAGVAR(ld_shlibs, $1)=no
+        ;;
+      aix[[4-9]]*)
+        if test "$host_cpu" = ia64; then
+          # On IA64, the linker does run time linking by default, so we don't
+          # have to do anything special.
+          aix_use_runtimelinking=no
+          exp_sym_flag='-Bexport'
+          no_entry_flag=""
+        else
+          aix_use_runtimelinking=no
 
-# If ld is used when linking, flag to hardcode \$libdir into
-# a binary during linking. This must work even if \$libdir does
-# not exist.
-hardcode_libdir_flag_spec_ld=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)
+          # Test if we are trying to use run time linking or normal
+          # AIX style linking. If -brtl is somewhere in LDFLAGS, we
+          # need to do runtime linking.
+          case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*)
+	    for ld_flag in $LDFLAGS; do
+	      case $ld_flag in
+	      *-brtl*)
+	        aix_use_runtimelinking=yes
+	        break
+	        ;;
+	      esac
+	    done
+	    ;;
+          esac
 
-# Whether we need a single -rpath flag with a separated argument.
-hardcode_libdir_separator=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_separator, $1)
+          exp_sym_flag='-bexport'
+          no_entry_flag='-bnoentry'
+        fi
 
-# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the
-# resulting binary.
-hardcode_direct=$_LT_AC_TAGVAR(hardcode_direct, $1)
+        # When large executables or shared objects are built, AIX ld can
+        # have problems creating the table of contents.  If linking a library
+        # or program results in "error TOC overflow" add -mminimal-toc to
+        # CXXFLAGS/CFLAGS for g++/gcc.  In the cases where that is not
+        # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
+
+        _LT_TAGVAR(archive_cmds, $1)=''
+        _LT_TAGVAR(hardcode_direct, $1)=yes
+        _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
+        _LT_TAGVAR(hardcode_libdir_separator, $1)=':'
+        _LT_TAGVAR(link_all_deplibs, $1)=yes
+        _LT_TAGVAR(file_list_spec, $1)='${wl}-f,'
+
+        if test "$GXX" = yes; then
+          case $host_os in aix4.[[012]]|aix4.[[012]].*)
+          # We only want to do this on AIX 4.2 and lower, the check
+          # below for broken collect2 doesn't work under 4.3+
+	  collect2name=`${CC} -print-prog-name=collect2`
+	  if test -f "$collect2name" &&
+	     strings "$collect2name" | $GREP resolve_lib_name >/dev/null
+	  then
+	    # We have reworked collect2
+	    :
+	  else
+	    # We have old collect2
+	    _LT_TAGVAR(hardcode_direct, $1)=unsupported
+	    # It fails to find uninstalled libraries when the uninstalled
+	    # path is not listed in the libpath.  Setting hardcode_minus_L
+	    # to unsupported forces relinking
+	    _LT_TAGVAR(hardcode_minus_L, $1)=yes
+	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+	    _LT_TAGVAR(hardcode_libdir_separator, $1)=
+	  fi
+          esac
+          shared_flag='-shared'
+	  if test "$aix_use_runtimelinking" = yes; then
+	    shared_flag="$shared_flag "'${wl}-G'
+	  fi
+        else
+          # not using gcc
+          if test "$host_cpu" = ia64; then
+	  # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
+	  # chokes on -Wl,-G. The following line is correct:
+	  shared_flag='-G'
+          else
+	    if test "$aix_use_runtimelinking" = yes; then
+	      shared_flag='${wl}-G'
+	    else
+	      shared_flag='${wl}-bM:SRE'
+	    fi
+          fi
+        fi
 
-# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
-# resulting binary.
-hardcode_minus_L=$_LT_AC_TAGVAR(hardcode_minus_L, $1)
+        _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-bexpall'
+        # It seems that -bexpall does not export symbols beginning with
+        # underscore (_), so it is better to generate a list of symbols to
+	# export.
+        _LT_TAGVAR(always_export_symbols, $1)=yes
+        if test "$aix_use_runtimelinking" = yes; then
+          # Warning - without using the other runtime loading flags (-brtl),
+          # -berok will link without error, but may produce a broken library.
+          _LT_TAGVAR(allow_undefined_flag, $1)='-berok'
+          # Determine the default libpath from the value encoded in an empty
+          # executable.
+          _LT_SYS_MODULE_PATH_AIX
+          _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
 
-# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into
-# the resulting binary.
-hardcode_shlibpath_var=$_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)
+          _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then $ECHO "X${wl}${allow_undefined_flag}" | $Xsed; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+        else
+          if test "$host_cpu" = ia64; then
+	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
+	    _LT_TAGVAR(allow_undefined_flag, $1)="-z nodefs"
+	    _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
+          else
+	    # Determine the default libpath from the value encoded in an
+	    # empty executable.
+	    _LT_SYS_MODULE_PATH_AIX
+	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
+	    # Warning - without using the other run time loading flags,
+	    # -berok will link without error, but may produce a broken library.
+	    _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
+	    _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
+	    # Exported symbols can be pulled into shared objects from archives
+	    _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
+	    _LT_TAGVAR(archive_cmds_need_lc, $1)=yes
+	    # This is similar to how AIX traditionally builds its shared
+	    # libraries.
+	    _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
+          fi
+        fi
+        ;;
 
-# Set to yes if building a shared library automatically hardcodes DIR into the library
-# and all subsequent libraries and executables linked against it.
-hardcode_automatic=$_LT_AC_TAGVAR(hardcode_automatic, $1)
+      beos*)
+	if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+	  _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+	  # Joseph Beckenbach <jrb3@best.com> says some releases of gcc
+	  # support --undefined.  This deserves some investigation.  FIXME
+	  _LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	else
+	  _LT_TAGVAR(ld_shlibs, $1)=no
+	fi
+	;;
 
-# Variables whose values should be saved in libtool wrapper scripts and
-# restored at relink time.
-variables_saved_for_relink="$variables_saved_for_relink"
+      chorus*)
+        case $cc_basename in
+          *)
+	  # FIXME: insert proper C++ library support
+	  _LT_TAGVAR(ld_shlibs, $1)=no
+	  ;;
+        esac
+        ;;
 
-# Whether libtool must link a program against all its dependency libraries.
-link_all_deplibs=$_LT_AC_TAGVAR(link_all_deplibs, $1)
+      cygwin* | mingw* | pw32* | cegcc*)
+        # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
+        # as there is no search path for DLLs.
+        _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+        _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+        _LT_TAGVAR(always_export_symbols, $1)=no
+        _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+
+        if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
+          _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+          # If the export-symbols file already is a .def file (1st line
+          # is EXPORTS), use it as is; otherwise, prepend...
+          _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
+	    cp $export_symbols $output_objdir/$soname.def;
+          else
+	    echo EXPORTS > $output_objdir/$soname.def;
+	    cat $export_symbols >> $output_objdir/$soname.def;
+          fi~
+          $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+        else
+          _LT_TAGVAR(ld_shlibs, $1)=no
+        fi
+        ;;
+      darwin* | rhapsody*)
+        _LT_DARWIN_LINKER_FEATURES($1)
+	;;
 
-# Compile-time system search path for libraries
-sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
+      dgux*)
+        case $cc_basename in
+          ec++*)
+	    # FIXME: insert proper C++ library support
+	    _LT_TAGVAR(ld_shlibs, $1)=no
+	    ;;
+          ghcx*)
+	    # Green Hills C++ Compiler
+	    # FIXME: insert proper C++ library support
+	    _LT_TAGVAR(ld_shlibs, $1)=no
+	    ;;
+          *)
+	    # FIXME: insert proper C++ library support
+	    _LT_TAGVAR(ld_shlibs, $1)=no
+	    ;;
+        esac
+        ;;
 
-# Run-time system search path for libraries
-sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
+      freebsd[[12]]*)
+        # C++ shared libraries reported to be fairly broken before
+	# switch to ELF
+        _LT_TAGVAR(ld_shlibs, $1)=no
+        ;;
 
-# Fix the shell variable \$srcfile for the compiler.
-fix_srcfile_path=$lt_fix_srcfile_path
+      freebsd-elf*)
+        _LT_TAGVAR(archive_cmds_need_lc, $1)=no
+        ;;
 
-# Set to yes if exported symbols are required.
-always_export_symbols=$_LT_AC_TAGVAR(always_export_symbols, $1)
+      freebsd* | dragonfly*)
+        # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF
+        # conventions
+        _LT_TAGVAR(ld_shlibs, $1)=yes
+        ;;
 
-# The commands to list exported symbols.
-export_symbols_cmds=$lt_[]_LT_AC_TAGVAR(export_symbols_cmds, $1)
+      gnu*)
+        ;;
 
-# The commands to extract the exported symbol list from a shared archive.
-extract_expsyms_cmds=$lt_extract_expsyms_cmds
+      hpux9*)
+        _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+        _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+        _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+        _LT_TAGVAR(hardcode_direct, $1)=yes
+        _LT_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
+				             # but as the default
+				             # location of the library.
+
+        case $cc_basename in
+          CC*)
+            # FIXME: insert proper C++ library support
+            _LT_TAGVAR(ld_shlibs, $1)=no
+            ;;
+          aCC*)
+            _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+            # Commands to make compiler produce verbose output that lists
+            # what "hidden" libraries, object files and flags are used when
+            # linking a shared library.
+            #
+            # There doesn't appear to be a way to prevent this compiler from
+            # explicitly linking system object files so we need to strip them
+            # from the output so that they don't get included in the library
+            # dependencies.
+            output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $EGREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed'
+            ;;
+          *)
+            if test "$GXX" = yes; then
+              _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared -nostdlib -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+            else
+              # FIXME: insert proper C++ library support
+              _LT_TAGVAR(ld_shlibs, $1)=no
+            fi
+            ;;
+        esac
+        ;;
 
-# Symbols that should not be listed in the preloaded symbols.
-exclude_expsyms=$lt_[]_LT_AC_TAGVAR(exclude_expsyms, $1)
+      hpux10*|hpux11*)
+        if test $with_gnu_ld = no; then
+	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+	  _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+
+          case $host_cpu in
+            hppa*64*|ia64*)
+              ;;
+            *)
+	      _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+              ;;
+          esac
+        fi
+        case $host_cpu in
+          hppa*64*|ia64*)
+            _LT_TAGVAR(hardcode_direct, $1)=no
+            _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+            ;;
+          *)
+            _LT_TAGVAR(hardcode_direct, $1)=yes
+            _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
+            _LT_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
+					         # but as the default
+					         # location of the library.
+            ;;
+        esac
+
+        case $cc_basename in
+          CC*)
+	    # FIXME: insert proper C++ library support
+	    _LT_TAGVAR(ld_shlibs, $1)=no
+	    ;;
+          aCC*)
+	    case $host_cpu in
+	      hppa*64*)
+	        _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	        ;;
+	      ia64*)
+	        _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	        ;;
+	      *)
+	        _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	        ;;
+	    esac
+	    # Commands to make compiler produce verbose output that lists
+	    # what "hidden" libraries, object files and flags are used when
+	    # linking a shared library.
+	    #
+	    # There doesn't appear to be a way to prevent this compiler from
+	    # explicitly linking system object files so we need to strip them
+	    # from the output so that they don't get included in the library
+	    # dependencies.
+	    output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $GREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed'
+	    ;;
+          *)
+	    if test "$GXX" = yes; then
+	      if test $with_gnu_ld = no; then
+	        case $host_cpu in
+	          hppa*64*)
+	            _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	            ;;
+	          ia64*)
+	            _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	            ;;
+	          *)
+	            _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	            ;;
+	        esac
+	      fi
+	    else
+	      # FIXME: insert proper C++ library support
+	      _LT_TAGVAR(ld_shlibs, $1)=no
+	    fi
+	    ;;
+        esac
+        ;;
 
-# Symbols that must always be exported.
-include_expsyms=$lt_[]_LT_AC_TAGVAR(include_expsyms, $1)
+      interix[[3-9]]*)
+	_LT_TAGVAR(hardcode_direct, $1)=no
+	_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+	_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+	_LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+	# Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
+	# Instead, shared libraries are loaded at an image base (0x10000000 by
+	# default) and relocated if they conflict, which is a slow very memory
+	# consuming and fragmenting process.  To avoid this, we pick a random,
+	# 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
+	# time.  Moving up from 0x10000000 also allows more sbrk(2) space.
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+	_LT_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+	;;
+      irix5* | irix6*)
+        case $cc_basename in
+          CC*)
+	    # SGI C++
+	    _LT_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
+
+	    # Archives containing C++ object files must be created using
+	    # "CC -ar", where "CC" is the IRIX C++ compiler.  This is
+	    # necessary to make sure instantiated templates are included
+	    # in the archive.
+	    _LT_TAGVAR(old_archive_cmds, $1)='$CC -ar -WR,-u -o $oldlib $oldobjs'
+	    ;;
+          *)
+	    if test "$GXX" = yes; then
+	      if test "$with_gnu_ld" = no; then
+	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+	      else
+	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` -o $lib'
+	      fi
+	    fi
+	    _LT_TAGVAR(link_all_deplibs, $1)=yes
+	    ;;
+        esac
+        _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+        _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+        _LT_TAGVAR(inherit_rpath, $1)=yes
+        ;;
 
-ifelse([$1],[],
-[# ### END LIBTOOL CONFIG],
-[# ### END LIBTOOL TAG CONFIG: $tagname])
+      linux* | k*bsd*-gnu)
+        case $cc_basename in
+          KCC*)
+	    # Kuck and Associates, Inc. (KAI) C++ Compiler
+
+	    # KCC will only create a shared library if the output file
+	    # ends with ".so" (or ".sl" for HP-UX), so rename the library
+	    # to its proper name (with version) after linking.
+	    _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
+	    _LT_TAGVAR(archive_expsym_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib'
+	    # Commands to make compiler produce verbose output that lists
+	    # what "hidden" libraries, object files and flags are used when
+	    # linking a shared library.
+	    #
+	    # There doesn't appear to be a way to prevent this compiler from
+	    # explicitly linking system object files so we need to strip them
+	    # from the output so that they don't get included in the library
+	    # dependencies.
+	    output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | $GREP "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed'
+
+	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+	    _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+
+	    # Archives containing C++ object files must be created using
+	    # "CC -Bstatic", where "CC" is the KAI C++ compiler.
+	    _LT_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs'
+	    ;;
+	  icpc* | ecpc* )
+	    # Intel C++
+	    with_gnu_ld=yes
+	    # version 8.0 and above of icpc choke on multiply defined symbols
+	    # if we add $predep_objects and $postdep_objects, however 7.1 and
+	    # earlier do not add the objects themselves.
+	    case `$CC -V 2>&1` in
+	      *"Version 7."*)
+	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
+		_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+		;;
+	      *)  # Version 8.0 or newer
+	        tmp_idyn=
+	        case $host_cpu in
+		  ia64*) tmp_idyn=' -i_dynamic';;
+		esac
+	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+		_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+		;;
+	    esac
+	    _LT_TAGVAR(archive_cmds_need_lc, $1)=no
+	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+	    _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+	    _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
+	    ;;
+          pgCC* | pgcpp*)
+            # Portland Group C++ compiler
+	    case `$CC -V` in
+	    *pgCC\ [[1-5]]* | *pgcpp\ [[1-5]]*)
+	      _LT_TAGVAR(prelink_cmds, $1)='tpldir=Template.dir~
+		rm -rf $tpldir~
+		$CC --prelink_objects --instantiation_dir $tpldir $objs $libobjs $compile_deplibs~
+		compile_command="$compile_command `find $tpldir -name \*.o | $NL2SP`"'
+	      _LT_TAGVAR(old_archive_cmds, $1)='tpldir=Template.dir~
+		rm -rf $tpldir~
+		$CC --prelink_objects --instantiation_dir $tpldir $oldobjs$old_deplibs~
+		$AR $AR_FLAGS $oldlib$oldobjs$old_deplibs `find $tpldir -name \*.o | $NL2SP`~
+		$RANLIB $oldlib'
+	      _LT_TAGVAR(archive_cmds, $1)='tpldir=Template.dir~
+		rm -rf $tpldir~
+		$CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~
+		$CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
+	      _LT_TAGVAR(archive_expsym_cmds, $1)='tpldir=Template.dir~
+		rm -rf $tpldir~
+		$CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~
+		$CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
+	      ;;
+	    *) # Version 6 will use weak symbols
+	      _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
+	      _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
+	      ;;
+	    esac
 
-__EOF__
+	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir'
+	    _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+	    _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
+            ;;
+	  cxx*)
+	    # Compaq C++
+	    _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	    _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname  -o $lib ${wl}-retain-symbols-file $wl$export_symbols'
 
-ifelse([$1],[], [
-  case $host_os in
-  aix3*)
-    cat <<\EOF >> "$cfgfile"
+	    runpath_var=LD_RUN_PATH
+	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
+	    _LT_TAGVAR(hardcode_libdir_separator, $1)=:
 
-# AIX sometimes has problems with the GCC collect2 program.  For some
-# reason, if we set the COLLECT_NAMES environment variable, the problems
-# vanish in a puff of smoke.
-if test "X${COLLECT_NAMES+set}" != Xset; then
-  COLLECT_NAMES=
-  export COLLECT_NAMES
-fi
-EOF
-    ;;
-  esac
+	    # Commands to make compiler produce verbose output that lists
+	    # what "hidden" libraries, object files and flags are used when
+	    # linking a shared library.
+	    #
+	    # There doesn't appear to be a way to prevent this compiler from
+	    # explicitly linking system object files so we need to strip them
+	    # from the output so that they don't get included in the library
+	    # dependencies.
+	    output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld"`; templist=`$ECHO "X$templist" | $Xsed -e "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed'
+	    ;;
+	  xl*)
+	    # IBM XL 8.0 on PPC, with GNU ld
+	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+	    _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+	    _LT_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	    if test "x$supports_anon_versioning" = xyes; then
+	      _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~
+		cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+		echo "local: *; };" >> $output_objdir/$libname.ver~
+		$CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
+	    fi
+	    ;;
+	  *)
+	    case `$CC -V 2>&1 | sed 5q` in
+	    *Sun\ C*)
+	      # Sun C++ 5.9
+	      _LT_TAGVAR(no_undefined_flag, $1)=' -zdefs'
+	      _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	      _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file ${wl}$export_symbols'
+	      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+	      _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
+	      _LT_TAGVAR(compiler_needs_object, $1)=yes
+
+	      # Not sure whether something based on
+	      # $CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1
+	      # would be better.
+	      output_verbose_link_cmd='echo'
+
+	      # Archives containing C++ object files must be created using
+	      # "CC -xar", where "CC" is the Sun C++ compiler.  This is
+	      # necessary to make sure instantiated templates are included
+	      # in the archive.
+	      _LT_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs'
+	      ;;
+	    esac
+	    ;;
+	esac
+	;;
 
-  # We use sed instead of cat because bash on DJGPP gets confused if
-  # if finds mixed CR/LF and LF-only lines.  Since sed operates in
-  # text mode, it properly converts lines to CR/LF.  This bash problem
-  # is reportedly fixed, but why not run on old versions too?
-  sed '$q' "$ltmain" >> "$cfgfile" || (rm -f "$cfgfile"; exit 1)
+      lynxos*)
+        # FIXME: insert proper C++ library support
+	_LT_TAGVAR(ld_shlibs, $1)=no
+	;;
 
-  mv -f "$cfgfile" "$ofile" || \
-    (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")
-  chmod +x "$ofile"
-])
-else
-  # If there is no Makefile yet, we rely on a make rule to execute
-  # `config.status --recheck' to rerun these tests and create the
-  # libtool script then.
-  ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'`
-  if test -f "$ltmain_in"; then
-    test -f Makefile && make "$ltmain"
-  fi
-fi
-])# AC_LIBTOOL_CONFIG
+      m88k*)
+        # FIXME: insert proper C++ library support
+        _LT_TAGVAR(ld_shlibs, $1)=no
+	;;
 
+      mvs*)
+        case $cc_basename in
+          cxx*)
+	    # FIXME: insert proper C++ library support
+	    _LT_TAGVAR(ld_shlibs, $1)=no
+	    ;;
+	  *)
+	    # FIXME: insert proper C++ library support
+	    _LT_TAGVAR(ld_shlibs, $1)=no
+	    ;;
+	esac
+	;;
 
-# AC_LIBTOOL_PROG_COMPILER_NO_RTTI([TAGNAME])
-# -------------------------------------------
-AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_NO_RTTI],
-[AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl
+      netbsd*)
+        if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+	  _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable  -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags'
+	  wlarc=
+	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+	  _LT_TAGVAR(hardcode_direct, $1)=yes
+	  _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+	fi
+	# Workaround some broken pre-1.5 toolchains
+	output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"'
+	;;
 
-_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=
+      *nto* | *qnx*)
+        _LT_TAGVAR(ld_shlibs, $1)=yes
+	;;
 
-if test "$GCC" = yes; then
-  _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin'
+      openbsd2*)
+        # C++ shared libraries are fairly broken
+	_LT_TAGVAR(ld_shlibs, $1)=no
+	;;
+
+      openbsd*)
+	if test -f /usr/libexec/ld.so; then
+	  _LT_TAGVAR(hardcode_direct, $1)=yes
+	  _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+	  _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
+	  _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
+	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+	  if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+	    _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib'
+	    _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+	    _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+	  fi
+	  output_verbose_link_cmd=echo
+	else
+	  _LT_TAGVAR(ld_shlibs, $1)=no
+	fi
+	;;
 
-  AC_LIBTOOL_COMPILER_OPTION([if $compiler supports -fno-rtti -fno-exceptions],
-    lt_cv_prog_compiler_rtti_exceptions,
-    [-fno-rtti -fno-exceptions], [],
-    [_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)="$_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) -fno-rtti -fno-exceptions"])
-fi
-])# AC_LIBTOOL_PROG_COMPILER_NO_RTTI
+      osf3* | osf4* | osf5*)
+        case $cc_basename in
+          KCC*)
+	    # Kuck and Associates, Inc. (KAI) C++ Compiler
+
+	    # KCC will only create a shared library if the output file
+	    # ends with ".so" (or ".sl" for HP-UX), so rename the library
+	    # to its proper name (with version) after linking.
+	    _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo "$lib" | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
+
+	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+	    _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+
+	    # Archives containing C++ object files must be created using
+	    # the KAI C++ compiler.
+	    case $host in
+	      osf3*) _LT_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs' ;;
+	      *) _LT_TAGVAR(old_archive_cmds, $1)='$CC -o $oldlib $oldobjs' ;;
+	    esac
+	    ;;
+          RCC*)
+	    # Rational C++ 2.4.1
+	    # FIXME: insert proper C++ library support
+	    _LT_TAGVAR(ld_shlibs, $1)=no
+	    ;;
+          cxx*)
+	    case $host in
+	      osf3*)
+	        _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
+	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && $ECHO "X${wl}-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
+	        _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+		;;
+	      *)
+	        _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
+	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
+	        _LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~
+	          echo "-hidden">> $lib.exp~
+	          $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname ${wl}-input ${wl}$lib.exp  `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib~
+	          $RM $lib.exp'
+	        _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
+		;;
+	    esac
 
+	    _LT_TAGVAR(hardcode_libdir_separator, $1)=:
 
-# AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE
-# ---------------------------------
-AC_DEFUN([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE],
-[AC_REQUIRE([AC_CANONICAL_HOST])
-AC_REQUIRE([LT_AC_PROG_SED])
-AC_REQUIRE([AC_PROG_NM])
-AC_REQUIRE([AC_OBJEXT])
-# Check for command to grab the raw symbol name followed by C symbol from nm.
-AC_MSG_CHECKING([command to parse $NM output from $compiler object])
-AC_CACHE_VAL([lt_cv_sys_global_symbol_pipe],
-[
-# These are sane defaults that work on at least a few old systems.
-# [They come from Ultrix.  What could be older than Ultrix?!! ;)]
+	    # Commands to make compiler produce verbose output that lists
+	    # what "hidden" libraries, object files and flags are used when
+	    # linking a shared library.
+	    #
+	    # There doesn't appear to be a way to prevent this compiler from
+	    # explicitly linking system object files so we need to strip them
+	    # from the output so that they don't get included in the library
+	    # dependencies.
+	    output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld" | $GREP -v "ld:"`; templist=`$ECHO "X$templist" | $Xsed -e "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed'
+	    ;;
+	  *)
+	    if test "$GXX" = yes && test "$with_gnu_ld" = no; then
+	      _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
+	      case $host in
+	        osf3*)
+	          _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+		  ;;
+	        *)
+	          _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+		  ;;
+	      esac
+
+	      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+	      _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+
+	      # Commands to make compiler produce verbose output that lists
+	      # what "hidden" libraries, object files and flags are used when
+	      # linking a shared library.
+	      output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"'
+
+	    else
+	      # FIXME: insert proper C++ library support
+	      _LT_TAGVAR(ld_shlibs, $1)=no
+	    fi
+	    ;;
+        esac
+        ;;
 
-# Character class describing NM global symbol codes.
-symcode='[[BCDEGRST]]'
+      psos*)
+        # FIXME: insert proper C++ library support
+        _LT_TAGVAR(ld_shlibs, $1)=no
+        ;;
 
-# Regexp to match symbols that can be accessed directly from C.
-sympat='\([[_A-Za-z]][[_A-Za-z0-9]]*\)'
+      sunos4*)
+        case $cc_basename in
+          CC*)
+	    # Sun C++ 4.x
+	    # FIXME: insert proper C++ library support
+	    _LT_TAGVAR(ld_shlibs, $1)=no
+	    ;;
+          lcc*)
+	    # Lucid
+	    # FIXME: insert proper C++ library support
+	    _LT_TAGVAR(ld_shlibs, $1)=no
+	    ;;
+          *)
+	    # FIXME: insert proper C++ library support
+	    _LT_TAGVAR(ld_shlibs, $1)=no
+	    ;;
+        esac
+        ;;
 
-# Transform an extracted symbol line into a proper C declaration
-lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern int \1;/p'"
+      solaris*)
+        case $cc_basename in
+          CC*)
+	    # Sun C++ 4.2, 5.x and Centerline C++
+            _LT_TAGVAR(archive_cmds_need_lc,$1)=yes
+	    _LT_TAGVAR(no_undefined_flag, $1)=' -zdefs'
+	    _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag}  -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	    _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+	      $CC -G${allow_undefined_flag} ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
+
+	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+	    _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+	    case $host_os in
+	      solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
+	      *)
+		# The compiler driver will combine and reorder linker options,
+		# but understands `-z linker_flag'.
+	        # Supported since Solaris 2.6 (maybe 2.5.1?)
+		_LT_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract'
+	        ;;
+	    esac
+	    _LT_TAGVAR(link_all_deplibs, $1)=yes
 
-# Transform an extracted symbol line into symbol name and symbol address
-lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/  {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode \([[^ ]]*\) \([[^ ]]*\)$/  {\"\2\", (lt_ptr) \&\2},/p'"
+	    output_verbose_link_cmd='echo'
 
-# Define system-specific variables.
-case $host_os in
-aix*)
-  symcode='[[BCDT]]'
-  ;;
-cygwin* | mingw* | pw32*)
-  symcode='[[ABCDGISTW]]'
-  ;;
-hpux*) # Its linker distinguishes data from code symbols
-  if test "$host_cpu" = ia64; then
-    symcode='[[ABCDEGRST]]'
-  fi
-  lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
-  lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/  {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/  {\"\2\", (lt_ptr) \&\2},/p'"
-  ;;
-linux* | k*bsd*-gnu)
-  if test "$host_cpu" = ia64; then
-    symcode='[[ABCDGIRSTW]]'
-    lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
-    lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/  {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/  {\"\2\", (lt_ptr) \&\2},/p'"
-  fi
-  ;;
-irix* | nonstopux*)
-  symcode='[[BCDEGRST]]'
-  ;;
-osf*)
-  symcode='[[BCDEGQRST]]'
-  ;;
-solaris*)
-  symcode='[[BDRT]]'
-  ;;
-sco3.2v5*)
-  symcode='[[DT]]'
-  ;;
-sysv4.2uw2*)
-  symcode='[[DT]]'
-  ;;
-sysv5* | sco5v6* | unixware* | OpenUNIX*)
-  symcode='[[ABDT]]'
-  ;;
-sysv4)
-  symcode='[[DFNSTU]]'
-  ;;
-esac
+	    # Archives containing C++ object files must be created using
+	    # "CC -xar", where "CC" is the Sun C++ compiler.  This is
+	    # necessary to make sure instantiated templates are included
+	    # in the archive.
+	    _LT_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs'
+	    ;;
+          gcx*)
+	    # Green Hills C++ Compiler
+	    _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
 
-# Handle CRLF in mingw tool chain
-opt_cr=
-case $build_os in
-mingw*)
-  opt_cr=`echo 'x\{0,1\}' | tr x '\015'` # option cr in regexp
-  ;;
-esac
+	    # The C++ compiler must be used to create the archive.
+	    _LT_TAGVAR(old_archive_cmds, $1)='$CC $LDFLAGS -archive -o $oldlib $oldobjs'
+	    ;;
+          *)
+	    # GNU C++ compiler with Solaris linker
+	    if test "$GXX" = yes && test "$with_gnu_ld" = no; then
+	      _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-z ${wl}defs'
+	      if $CC --version | $GREP -v '^2\.7' > /dev/null; then
+	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
+	        _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+		  $CC -shared -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
+
+	        # Commands to make compiler produce verbose output that lists
+	        # what "hidden" libraries, object files and flags are used when
+	        # linking a shared library.
+	        output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"'
+	      else
+	        # g++ 2.7 appears to require `-G' NOT `-shared' on this
+	        # platform.
+	        _LT_TAGVAR(archive_cmds, $1)='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
+	        _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+		  $CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
+
+	        # Commands to make compiler produce verbose output that lists
+	        # what "hidden" libraries, object files and flags are used when
+	        # linking a shared library.
+	        output_verbose_link_cmd='$CC -G $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"'
+	      fi
+
+	      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $wl$libdir'
+	      case $host_os in
+		solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
+		*)
+		  _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
+		  ;;
+	      esac
+	    fi
+	    ;;
+        esac
+        ;;
 
-# If we're using GNU nm, then use its standard symbol codes.
-case `$NM -V 2>&1` in
-*GNU* | *'with BFD'*)
-  symcode='[[ABCDGIRSTW]]' ;;
-esac
+    sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*)
+      _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
+      _LT_TAGVAR(archive_cmds_need_lc, $1)=no
+      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+      runpath_var='LD_RUN_PATH'
 
-# Try without a prefix undercore, then with it.
-for ac_symprfx in "" "_"; do
+      case $cc_basename in
+        CC*)
+	  _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	*)
+	  _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+      esac
+      ;;
 
-  # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol.
-  symxfrm="\\1 $ac_symprfx\\2 \\2"
+      sysv5* | sco3.2v5* | sco5v6*)
+	# Note: We can NOT use -z defs as we might desire, because we do not
+	# link with -lc, and that would cause any symbols used from libc to
+	# always be unresolved, which means just about no library would
+	# ever link correctly.  If we're not using GNU ld we use -z text
+	# though, which does catch some bad symbols but isn't as heavy-handed
+	# as -z defs.
+	_LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
+	_LT_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs'
+	_LT_TAGVAR(archive_cmds_need_lc, $1)=no
+	_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+	_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R,$libdir'
+	_LT_TAGVAR(hardcode_libdir_separator, $1)=':'
+	_LT_TAGVAR(link_all_deplibs, $1)=yes
+	_LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport'
+	runpath_var='LD_RUN_PATH'
 
-  # Write the raw and C identifiers.
-  lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[ 	]]\($symcode$symcode*\)[[ 	]][[ 	]]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'"
+	case $cc_basename in
+          CC*)
+	    _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	    _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	    ;;
+	  *)
+	    _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	    _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	    ;;
+	esac
+      ;;
 
-  # Check to see that the pipe works correctly.
-  pipe_works=no
+      tandem*)
+        case $cc_basename in
+          NCC*)
+	    # NonStop-UX NCC 3.20
+	    # FIXME: insert proper C++ library support
+	    _LT_TAGVAR(ld_shlibs, $1)=no
+	    ;;
+          *)
+	    # FIXME: insert proper C++ library support
+	    _LT_TAGVAR(ld_shlibs, $1)=no
+	    ;;
+        esac
+        ;;
 
-  rm -f conftest*
-  cat > conftest.$ac_ext <<EOF
-#ifdef __cplusplus
-extern "C" {
-#endif
-char nm_test_var;
-void nm_test_func(){}
-#ifdef __cplusplus
-}
-#endif
-int main(){nm_test_var='a';nm_test_func();return(0);}
-EOF
+      vxworks*)
+        # FIXME: insert proper C++ library support
+        _LT_TAGVAR(ld_shlibs, $1)=no
+        ;;
 
-  if AC_TRY_EVAL(ac_compile); then
-    # Now try to grab the symbols.
-    nlist=conftest.nm
-    if AC_TRY_EVAL(NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) && test -s "$nlist"; then
-      # Try sorting and uniquifying the output.
-      if sort "$nlist" | uniq > "$nlist"T; then
-	mv -f "$nlist"T "$nlist"
-      else
-	rm -f "$nlist"T
-      fi
+      *)
+        # FIXME: insert proper C++ library support
+        _LT_TAGVAR(ld_shlibs, $1)=no
+        ;;
+    esac
 
-      # Make sure that we snagged all the symbols we need.
-      if grep ' nm_test_var$' "$nlist" >/dev/null; then
-	if grep ' nm_test_func$' "$nlist" >/dev/null; then
-	  cat <<EOF > conftest.$ac_ext
-#ifdef __cplusplus
-extern "C" {
-#endif
+    AC_MSG_RESULT([$_LT_TAGVAR(ld_shlibs, $1)])
+    test "$_LT_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no
 
-EOF
-	  # Now generate the symbol file.
-	  eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | grep -v main >> conftest.$ac_ext'
+    _LT_TAGVAR(GCC, $1)="$GXX"
+    _LT_TAGVAR(LD, $1)="$LD"
 
-	  cat <<EOF >> conftest.$ac_ext
-#if defined (__STDC__) && __STDC__
-# define lt_ptr_t void *
-#else
-# define lt_ptr_t char *
-# define const
-#endif
+    ## CAVEAT EMPTOR:
+    ## There is no encapsulation within the following macros, do not change
+    ## the running order or otherwise move them around unless you know exactly
+    ## what you are doing...
+    _LT_SYS_HIDDEN_LIBDEPS($1)
+    _LT_COMPILER_PIC($1)
+    _LT_COMPILER_C_O($1)
+    _LT_COMPILER_FILE_LOCKS($1)
+    _LT_LINKER_SHLIBS($1)
+    _LT_SYS_DYNAMIC_LINKER($1)
+    _LT_LINKER_HARDCODE_LIBPATH($1)
+
+    _LT_CONFIG($1)
+  fi # test -n "$compiler"
+
+  CC=$lt_save_CC
+  LDCXX=$LD
+  LD=$lt_save_LD
+  GCC=$lt_save_GCC
+  with_gnu_ld=$lt_save_with_gnu_ld
+  lt_cv_path_LDCXX=$lt_cv_path_LD
+  lt_cv_path_LD=$lt_save_path_LD
+  lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld
+  lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld
+fi # test "$_lt_caught_CXX_error" != yes
 
-/* The mapping between symbol names and symbols. */
-const struct {
-  const char *name;
-  lt_ptr_t address;
-}
-lt_preloaded_symbols[[]] =
-{
-EOF
-	  $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/  {\"\2\", (lt_ptr_t) \&\2},/" < "$nlist" | grep -v main >> conftest.$ac_ext
-	  cat <<\EOF >> conftest.$ac_ext
-  {0, (lt_ptr_t) 0}
-};
+AC_LANG_POP
+])# _LT_LANG_CXX_CONFIG
 
-#ifdef __cplusplus
-}
-#endif
-EOF
-	  # Now try linking the two files.
-	  mv conftest.$ac_objext conftstm.$ac_objext
-	  lt_save_LIBS="$LIBS"
-	  lt_save_CFLAGS="$CFLAGS"
-	  LIBS="conftstm.$ac_objext"
-	  CFLAGS="$CFLAGS$_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)"
-	  if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext}; then
-	    pipe_works=yes
-	  fi
-	  LIBS="$lt_save_LIBS"
-	  CFLAGS="$lt_save_CFLAGS"
-	else
-	  echo "cannot find nm_test_func in $nlist" >&AS_MESSAGE_LOG_FD
-	fi
-      else
-	echo "cannot find nm_test_var in $nlist" >&AS_MESSAGE_LOG_FD
-      fi
-    else
-      echo "cannot run $lt_cv_sys_global_symbol_pipe" >&AS_MESSAGE_LOG_FD
-    fi
-  else
-    echo "$progname: failed program was:" >&AS_MESSAGE_LOG_FD
-    cat conftest.$ac_ext >&5
-  fi
-  rm -rf conftest* conftst*
 
-  # Do not use the global_symbol_pipe unless it works.
-  if test "$pipe_works" = yes; then
-    break
-  else
-    lt_cv_sys_global_symbol_pipe=
-  fi
-done
+# _LT_SYS_HIDDEN_LIBDEPS([TAGNAME])
+# ---------------------------------
+# Figure out "hidden" library dependencies from verbose
+# compiler output when linking a shared library.
+# Parse the compiler output and extract the necessary
+# objects, libraries and library flags.
+m4_defun([_LT_SYS_HIDDEN_LIBDEPS],
+[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+# Dependencies to place before and after the object being linked:
+_LT_TAGVAR(predep_objects, $1)=
+_LT_TAGVAR(postdep_objects, $1)=
+_LT_TAGVAR(predeps, $1)=
+_LT_TAGVAR(postdeps, $1)=
+_LT_TAGVAR(compiler_lib_search_path, $1)=
+
+dnl we can't use the lt_simple_compile_test_code here,
+dnl because it contains code intended for an executable,
+dnl not a library.  It's possible we should let each
+dnl tag define a new lt_????_link_test_code variable,
+dnl but it's only used here...
+m4_if([$1], [], [cat > conftest.$ac_ext <<_LT_EOF
+int a;
+void foo (void) { a = 0; }
+_LT_EOF
+], [$1], [CXX], [cat > conftest.$ac_ext <<_LT_EOF
+class Foo
+{
+public:
+  Foo (void) { a = 0; }
+private:
+  int a;
+};
+_LT_EOF
+], [$1], [F77], [cat > conftest.$ac_ext <<_LT_EOF
+      subroutine foo
+      implicit none
+      integer*4 a
+      a=0
+      return
+      end
+_LT_EOF
+], [$1], [FC], [cat > conftest.$ac_ext <<_LT_EOF
+      subroutine foo
+      implicit none
+      integer a
+      a=0
+      return
+      end
+_LT_EOF
+], [$1], [GCJ], [cat > conftest.$ac_ext <<_LT_EOF
+public class foo {
+  private int a;
+  public void bar (void) {
+    a = 0;
+  }
+};
+_LT_EOF
 ])
-if test -z "$lt_cv_sys_global_symbol_pipe"; then
-  lt_cv_sys_global_symbol_to_cdecl=
-fi
-if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then
-  AC_MSG_RESULT(failed)
+dnl Parse the compiler output and extract the necessary
+dnl objects, libraries and library flags.
+if AC_TRY_EVAL(ac_compile); then
+  # Parse the compiler output and extract the necessary
+  # objects, libraries and library flags.
+
+  # Sentinel used to keep track of whether or not we are before
+  # the conftest object file.
+  pre_test_object_deps_done=no
+
+  for p in `eval "$output_verbose_link_cmd"`; do
+    case $p in
+
+    -L* | -R* | -l*)
+       # Some compilers place space between "-{L,R}" and the path.
+       # Remove the space.
+       if test $p = "-L" ||
+          test $p = "-R"; then
+	 prev=$p
+	 continue
+       else
+	 prev=
+       fi
+
+       if test "$pre_test_object_deps_done" = no; then
+	 case $p in
+	 -L* | -R*)
+	   # Internal compiler library paths should come after those
+	   # provided the user.  The postdeps already come after the
+	   # user supplied libs so there is no need to process them.
+	   if test -z "$_LT_TAGVAR(compiler_lib_search_path, $1)"; then
+	     _LT_TAGVAR(compiler_lib_search_path, $1)="${prev}${p}"
+	   else
+	     _LT_TAGVAR(compiler_lib_search_path, $1)="${_LT_TAGVAR(compiler_lib_search_path, $1)} ${prev}${p}"
+	   fi
+	   ;;
+	 # The "-l" case would never come before the object being
+	 # linked, so don't bother handling this case.
+	 esac
+       else
+	 if test -z "$_LT_TAGVAR(postdeps, $1)"; then
+	   _LT_TAGVAR(postdeps, $1)="${prev}${p}"
+	 else
+	   _LT_TAGVAR(postdeps, $1)="${_LT_TAGVAR(postdeps, $1)} ${prev}${p}"
+	 fi
+       fi
+       ;;
+
+    *.$objext)
+       # This assumes that the test object file only shows up
+       # once in the compiler output.
+       if test "$p" = "conftest.$objext"; then
+	 pre_test_object_deps_done=yes
+	 continue
+       fi
+
+       if test "$pre_test_object_deps_done" = no; then
+	 if test -z "$_LT_TAGVAR(predep_objects, $1)"; then
+	   _LT_TAGVAR(predep_objects, $1)="$p"
+	 else
+	   _LT_TAGVAR(predep_objects, $1)="$_LT_TAGVAR(predep_objects, $1) $p"
+	 fi
+       else
+	 if test -z "$_LT_TAGVAR(postdep_objects, $1)"; then
+	   _LT_TAGVAR(postdep_objects, $1)="$p"
+	 else
+	   _LT_TAGVAR(postdep_objects, $1)="$_LT_TAGVAR(postdep_objects, $1) $p"
+	 fi
+       fi
+       ;;
+
+    *) ;; # Ignore the rest.
+
+    esac
+  done
+
+  # Clean up.
+  rm -f a.out a.exe
 else
-  AC_MSG_RESULT(ok)
+  echo "libtool.m4: error: problem compiling $1 test program"
 fi
-]) # AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE
 
+$RM -f confest.$objext
 
-# AC_LIBTOOL_PROG_COMPILER_PIC([TAGNAME])
-# ---------------------------------------
-AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_PIC],
-[_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)=
-_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
-_LT_AC_TAGVAR(lt_prog_compiler_static, $1)=
+# PORTME: override above test on systems where it is broken
+m4_if([$1], [CXX],
+[case $host_os in
+interix[[3-9]]*)
+  # Interix 3.5 installs completely hosed .la files for C++, so rather than
+  # hack all around it, let's just trust "g++" to DTRT.
+  _LT_TAGVAR(predep_objects,$1)=
+  _LT_TAGVAR(postdep_objects,$1)=
+  _LT_TAGVAR(postdeps,$1)=
+  ;;
 
-AC_MSG_CHECKING([for $compiler option to produce PIC])
- ifelse([$1],[CXX],[
-  # C++ specific cases for pic, static, wl, etc.
-  if test "$GXX" = yes; then
-    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-    _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static'
+linux*)
+  case `$CC -V 2>&1 | sed 5q` in
+  *Sun\ C*)
+    # Sun C++ 5.9
 
-    case $host_os in
-    aix*)
-      # All AIX code is PIC.
-      if test "$host_cpu" = ia64; then
-	# AIX 5 now supports IA64 processor
-	_LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-      fi
-      ;;
-    amigaos*)
-      # FIXME: we need at least 68020 code to build shared libraries, but
-      # adding the `-m68020' flag to GCC prevents building anything better,
-      # like `-m68040'.
-      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4'
-      ;;
-    beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
-      # PIC is the default for these OSes.
-      ;;
-    mingw* | cygwin* | os2* | pw32*)
-      # This hack is so that the source file can tell whether it is being
-      # built for inclusion in a dll (and should export symbols for example).
-      # Although the cygwin gcc ignores -fPIC, still need this for old-style
-      # (--disable-auto-import) libraries
-      m4_if([$1], [GCJ], [],
-	[_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
-      ;;
-    darwin* | rhapsody*)
-      # PIC is the default on this platform
-      # Common symbols not allowed in MH_DYLIB files
-      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'
-      ;;
-    *djgpp*)
-      # DJGPP does not support shared libraries at all
-      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
-      ;;
-    interix[[3-9]]*)
-      # Interix 3.x gcc -fpic/-fPIC options generate broken code.
-      # Instead, we relocate shared libraries at runtime.
-      ;;
-    sysv4*MP*)
-      if test -d /usr/nec; then
-	_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic
-      fi
-      ;;
-    hpux*)
-      # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
-      # not for PA HP-UX.
-      case $host_cpu in
-      hppa*64*|ia64*)
-	;;
-      *)
-	_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
-	;;
-      esac
+    # The more standards-conforming stlport4 library is
+    # incompatible with the Cstd library. Avoid specifying
+    # it if it's in CXXFLAGS. Ignore libCrun as
+    # -library=stlport4 depends on it.
+    case " $CXX $CXXFLAGS " in
+    *" -library=stlport4 "*)
+      solaris_use_stlport4=yes
       ;;
-    *)
-      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+    esac
+
+    if test "$solaris_use_stlport4" != yes; then
+      _LT_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun'
+    fi
+    ;;
+  esac
+  ;;
+
+solaris*)
+  case $cc_basename in
+  CC*)
+    # The more standards-conforming stlport4 library is
+    # incompatible with the Cstd library. Avoid specifying
+    # it if it's in CXXFLAGS. Ignore libCrun as
+    # -library=stlport4 depends on it.
+    case " $CXX $CXXFLAGS " in
+    *" -library=stlport4 "*)
+      solaris_use_stlport4=yes
       ;;
     esac
-  else
+
+    # Adding this requires a known-good setup of shared libraries for
+    # Sun compiler versions before 5.6, else PIC objects from an old
+    # archive will be linked into the output, leading to subtle bugs.
+    if test "$solaris_use_stlport4" != yes; then
+      _LT_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun'
+    fi
+    ;;
+  esac
+  ;;
+esac
+])
+
+case " $_LT_TAGVAR(postdeps, $1) " in
+*" -lc "*) _LT_TAGVAR(archive_cmds_need_lc, $1)=no ;;
+esac
+ _LT_TAGVAR(compiler_lib_search_dirs, $1)=
+if test -n "${_LT_TAGVAR(compiler_lib_search_path, $1)}"; then
+ _LT_TAGVAR(compiler_lib_search_dirs, $1)=`echo " ${_LT_TAGVAR(compiler_lib_search_path, $1)}" | ${SED} -e 's! -L! !g' -e 's!^ !!'`
+fi
+_LT_TAGDECL([], [compiler_lib_search_dirs], [1],
+    [The directories searched by this compiler when creating a shared library])
+_LT_TAGDECL([], [predep_objects], [1],
+    [Dependencies to place before and after the objects being linked to
+    create a shared library])
+_LT_TAGDECL([], [postdep_objects], [1])
+_LT_TAGDECL([], [predeps], [1])
+_LT_TAGDECL([], [postdeps], [1])
+_LT_TAGDECL([], [compiler_lib_search_path], [1],
+    [The library search path used internally by the compiler when linking
+    a shared library])
+])# _LT_SYS_HIDDEN_LIBDEPS
+
+
+# _LT_PROG_F77
+# ------------
+# Since AC_PROG_F77 is broken, in that it returns the empty string
+# if there is no fortran compiler, we have our own version here.
+m4_defun([_LT_PROG_F77],
+[
+pushdef([AC_MSG_ERROR], [_lt_disable_F77=yes])
+AC_PROG_F77
+if test -z "$F77" || test "X$F77" = "Xno"; then
+  _lt_disable_F77=yes
+fi
+popdef([AC_MSG_ERROR])
+])# _LT_PROG_F77
+
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([_LT_PROG_F77], [])
+
+
+# _LT_LANG_F77_CONFIG([TAG])
+# --------------------------
+# Ensure that the configuration variables for a Fortran 77 compiler are
+# suitably defined.  These variables are subsequently used by _LT_CONFIG
+# to write the compiler configuration to `libtool'.
+m4_defun([_LT_LANG_F77_CONFIG],
+[AC_REQUIRE([_LT_PROG_F77])dnl
+AC_LANG_PUSH(Fortran 77)
+
+_LT_TAGVAR(archive_cmds_need_lc, $1)=no
+_LT_TAGVAR(allow_undefined_flag, $1)=
+_LT_TAGVAR(always_export_symbols, $1)=no
+_LT_TAGVAR(archive_expsym_cmds, $1)=
+_LT_TAGVAR(export_dynamic_flag_spec, $1)=
+_LT_TAGVAR(hardcode_direct, $1)=no
+_LT_TAGVAR(hardcode_direct_absolute, $1)=no
+_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
+_LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
+_LT_TAGVAR(hardcode_libdir_separator, $1)=
+_LT_TAGVAR(hardcode_minus_L, $1)=no
+_LT_TAGVAR(hardcode_automatic, $1)=no
+_LT_TAGVAR(inherit_rpath, $1)=no
+_LT_TAGVAR(module_cmds, $1)=
+_LT_TAGVAR(module_expsym_cmds, $1)=
+_LT_TAGVAR(link_all_deplibs, $1)=unknown
+_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
+_LT_TAGVAR(no_undefined_flag, $1)=
+_LT_TAGVAR(whole_archive_flag_spec, $1)=
+_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
+
+# Source file extension for f77 test sources.
+ac_ext=f
+
+# Object file extension for compiled f77 test sources.
+objext=o
+_LT_TAGVAR(objext, $1)=$objext
+
+# No sense in running all these tests if we already determined that
+# the F77 compiler isn't working.  Some variables (like enable_shared)
+# are currently assumed to apply to all compilers on this platform,
+# and will be corrupted by setting them based on a non-working compiler.
+if test "$_lt_disable_F77" != yes; then
+  # Code to be used in simple compile tests
+  lt_simple_compile_test_code="\
+      subroutine t
+      return
+      end
+"
+
+  # Code to be used in simple link tests
+  lt_simple_link_test_code="\
+      program t
+      end
+"
+
+  # ltmain only uses $CC for tagged configurations so make sure $CC is set.
+  _LT_TAG_COMPILER
+
+  # save warnings/boilerplate of simple test code
+  _LT_COMPILER_BOILERPLATE
+  _LT_LINKER_BOILERPLATE
+
+  # Allow CC to be a program name with arguments.
+  lt_save_CC="$CC"
+  lt_save_GCC=$GCC
+  CC=${F77-"f77"}
+  compiler=$CC
+  _LT_TAGVAR(compiler, $1)=$CC
+  _LT_CC_BASENAME([$compiler])
+  GCC=$G77
+  if test -n "$compiler"; then
+    AC_MSG_CHECKING([if libtool supports shared libraries])
+    AC_MSG_RESULT([$can_build_shared])
+
+    AC_MSG_CHECKING([whether to build shared libraries])
+    test "$can_build_shared" = "no" && enable_shared=no
+
+    # On AIX, shared libraries and static libraries use the same namespace, and
+    # are all built from PIC.
     case $host_os in
+      aix3*)
+        test "$enable_shared" = yes && enable_static=no
+        if test -n "$RANLIB"; then
+          archive_cmds="$archive_cmds~\$RANLIB \$lib"
+          postinstall_cmds='$RANLIB $lib'
+        fi
+        ;;
       aix[[4-9]]*)
-	# All AIX code is PIC.
-	if test "$host_cpu" = ia64; then
-	  # AIX 5 now supports IA64 processor
-	  _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-	else
-	  _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp'
+	if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
+	  test "$enable_shared" = yes && enable_static=no
 	fi
-	;;
-      chorus*)
-	case $cc_basename in
-	cxch68*)
-	  # Green Hills C++ Compiler
-	  # _LT_AC_TAGVAR(lt_prog_compiler_static, $1)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a"
-	  ;;
-	esac
-	;;
-       darwin*)
-         # PIC is the default on this platform
-         # Common symbols not allowed in MH_DYLIB files
-         case $cc_basename in
-           xlc*)
-           _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-qnocommon'
-           _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-           ;;
-         esac
-       ;;
-      dgux*)
-	case $cc_basename in
-	  ec++*)
-	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-	    ;;
-	  ghcx*)
-	    # Green Hills C++ Compiler
-	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
-	    ;;
-	  *)
-	    ;;
-	esac
-	;;
-      freebsd* | dragonfly*)
-	# FreeBSD uses GNU C++
-	;;
-      hpux9* | hpux10* | hpux11*)
-	case $cc_basename in
-	  CC*)
-	    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-	    _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
-	    if test "$host_cpu" != ia64; then
-	      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
-	    fi
-	    ;;
-	  aCC*)
-	    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-	    _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
-	    case $host_cpu in
-	    hppa*64*|ia64*)
-	      # +Z the default
-	      ;;
-	    *)
-	      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
-	      ;;
-	    esac
-	    ;;
-	  *)
-	    ;;
-	esac
-	;;
-      interix*)
-	# This is c89, which is MS Visual C++ (no shared libs)
-	# Anyone wants to do a port?
-	;;
-      irix5* | irix6* | nonstopux*)
-	case $cc_basename in
-	  CC*)
-	    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-	    _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
-	    # CC pic flag -KPIC is the default.
-	    ;;
-	  *)
-	    ;;
-	esac
-	;;
-      linux* | k*bsd*-gnu)
-	case $cc_basename in
-	  KCC*)
-	    # KAI C++ Compiler
-	    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,'
-	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
-	    ;;
-	  icpc* | ecpc*)
-	    # Intel C++
-	    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-	    _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static'
-	    ;;
-	  pgCC* | pgcpp*)
-	    # Portland Group C++ compiler.
-	    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fpic'
-	    _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-	    ;;
-	  cxx*)
-	    # Compaq C++
-	    # Make sure the PIC flag is empty.  It appears that all Alpha
-	    # Linux and Compaq Tru64 Unix objects are PIC.
-	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
-	    _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
-	    ;;
-	  *)
-	    case `$CC -V 2>&1 | sed 5q` in
-	    *Sun\ C*)
-	      # Sun C++ 5.9
-	      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-	      _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-	      _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
-	      ;;
-	    esac
-	    ;;
-	esac
-	;;
-      lynxos*)
-	;;
-      m88k*)
-	;;
-      mvs*)
-	case $cc_basename in
-	  cxx*)
-	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-W c,exportall'
-	    ;;
-	  *)
-	    ;;
-	esac
-	;;
-      netbsd*)
-	;;
-      osf3* | osf4* | osf5*)
-	case $cc_basename in
-	  KCC*)
-	    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,'
-	    ;;
-	  RCC*)
-	    # Rational C++ 2.4.1
-	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
-	    ;;
-	  cxx*)
-	    # Digital/Compaq C++
-	    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-	    # Make sure the PIC flag is empty.  It appears that all Alpha
-	    # Linux and Compaq Tru64 Unix objects are PIC.
-	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
-	    _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
-	    ;;
-	  *)
-	    ;;
-	esac
-	;;
-      psos*)
-	;;
-      solaris*)
-	case $cc_basename in
-	  CC*)
-	    # Sun C++ 4.2, 5.x and Centerline C++
-	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-	    _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-	    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
-	    ;;
-	  gcx*)
-	    # Green Hills C++ Compiler
-	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
-	    ;;
-	  *)
-	    ;;
-	esac
-	;;
-      sunos4*)
-	case $cc_basename in
-	  CC*)
-	    # Sun C++ 4.x
-	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
-	    _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-	    ;;
-	  lcc*)
-	    # Lucid
-	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
-	    ;;
-	  *)
-	    ;;
-	esac
-	;;
-      tandem*)
-	case $cc_basename in
-	  NCC*)
-	    # NonStop-UX NCC 3.20
-	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-	    ;;
-	  *)
-	    ;;
-	esac
-	;;
-      sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
-	case $cc_basename in
-	  CC*)
-	    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-	    _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-	    ;;
-	esac
-	;;
-      vxworks*)
-	;;
-      *)
-	_LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
-	;;
+        ;;
     esac
-  fi
-],
+    AC_MSG_RESULT([$enable_shared])
+
+    AC_MSG_CHECKING([whether to build static libraries])
+    # Make sure either enable_shared or enable_static is yes.
+    test "$enable_shared" = yes || enable_static=yes
+    AC_MSG_RESULT([$enable_static])
+
+    _LT_TAGVAR(GCC, $1)="$G77"
+    _LT_TAGVAR(LD, $1)="$LD"
+
+    ## CAVEAT EMPTOR:
+    ## There is no encapsulation within the following macros, do not change
+    ## the running order or otherwise move them around unless you know exactly
+    ## what you are doing...
+    _LT_COMPILER_PIC($1)
+    _LT_COMPILER_C_O($1)
+    _LT_COMPILER_FILE_LOCKS($1)
+    _LT_LINKER_SHLIBS($1)
+    _LT_SYS_DYNAMIC_LINKER($1)
+    _LT_LINKER_HARDCODE_LIBPATH($1)
+
+    _LT_CONFIG($1)
+  fi # test -n "$compiler"
+
+  GCC=$lt_save_GCC
+  CC="$lt_save_CC"
+fi # test "$_lt_disable_F77" != yes
+
+AC_LANG_POP
+])# _LT_LANG_F77_CONFIG
+
+
+# _LT_PROG_FC
+# -----------
+# Since AC_PROG_FC is broken, in that it returns the empty string
+# if there is no fortran compiler, we have our own version here.
+m4_defun([_LT_PROG_FC],
 [
-  if test "$GCC" = yes; then
-    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-    _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static'
+pushdef([AC_MSG_ERROR], [_lt_disable_FC=yes])
+AC_PROG_FC
+if test -z "$FC" || test "X$FC" = "Xno"; then
+  _lt_disable_FC=yes
+fi
+popdef([AC_MSG_ERROR])
+])# _LT_PROG_FC
+
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([_LT_PROG_FC], [])
+
+
+# _LT_LANG_FC_CONFIG([TAG])
+# -------------------------
+# Ensure that the configuration variables for a Fortran compiler are
+# suitably defined.  These variables are subsequently used by _LT_CONFIG
+# to write the compiler configuration to `libtool'.
+m4_defun([_LT_LANG_FC_CONFIG],
+[AC_REQUIRE([_LT_PROG_FC])dnl
+AC_LANG_PUSH(Fortran)
+
+_LT_TAGVAR(archive_cmds_need_lc, $1)=no
+_LT_TAGVAR(allow_undefined_flag, $1)=
+_LT_TAGVAR(always_export_symbols, $1)=no
+_LT_TAGVAR(archive_expsym_cmds, $1)=
+_LT_TAGVAR(export_dynamic_flag_spec, $1)=
+_LT_TAGVAR(hardcode_direct, $1)=no
+_LT_TAGVAR(hardcode_direct_absolute, $1)=no
+_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
+_LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
+_LT_TAGVAR(hardcode_libdir_separator, $1)=
+_LT_TAGVAR(hardcode_minus_L, $1)=no
+_LT_TAGVAR(hardcode_automatic, $1)=no
+_LT_TAGVAR(inherit_rpath, $1)=no
+_LT_TAGVAR(module_cmds, $1)=
+_LT_TAGVAR(module_expsym_cmds, $1)=
+_LT_TAGVAR(link_all_deplibs, $1)=unknown
+_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
+_LT_TAGVAR(no_undefined_flag, $1)=
+_LT_TAGVAR(whole_archive_flag_spec, $1)=
+_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
+
+# Source file extension for fc test sources.
+ac_ext=${ac_fc_srcext-f}
+
+# Object file extension for compiled fc test sources.
+objext=o
+_LT_TAGVAR(objext, $1)=$objext
+
+# No sense in running all these tests if we already determined that
+# the FC compiler isn't working.  Some variables (like enable_shared)
+# are currently assumed to apply to all compilers on this platform,
+# and will be corrupted by setting them based on a non-working compiler.
+if test "$_lt_disable_FC" != yes; then
+  # Code to be used in simple compile tests
+  lt_simple_compile_test_code="\
+      subroutine t
+      return
+      end
+"
+
+  # Code to be used in simple link tests
+  lt_simple_link_test_code="\
+      program t
+      end
+"
+
+  # ltmain only uses $CC for tagged configurations so make sure $CC is set.
+  _LT_TAG_COMPILER
+
+  # save warnings/boilerplate of simple test code
+  _LT_COMPILER_BOILERPLATE
+  _LT_LINKER_BOILERPLATE
+
+  # Allow CC to be a program name with arguments.
+  lt_save_CC="$CC"
+  lt_save_GCC=$GCC
+  CC=${FC-"f95"}
+  compiler=$CC
+  GCC=$ac_cv_fc_compiler_gnu
+
+  _LT_TAGVAR(compiler, $1)=$CC
+  _LT_CC_BASENAME([$compiler])
+
+  if test -n "$compiler"; then
+    AC_MSG_CHECKING([if libtool supports shared libraries])
+    AC_MSG_RESULT([$can_build_shared])
+
+    AC_MSG_CHECKING([whether to build shared libraries])
+    test "$can_build_shared" = "no" && enable_shared=no
+
+    # On AIX, shared libraries and static libraries use the same namespace, and
+    # are all built from PIC.
+    case $host_os in
+      aix3*)
+        test "$enable_shared" = yes && enable_static=no
+        if test -n "$RANLIB"; then
+          archive_cmds="$archive_cmds~\$RANLIB \$lib"
+          postinstall_cmds='$RANLIB $lib'
+        fi
+        ;;
+      aix[[4-9]]*)
+	if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
+	  test "$enable_shared" = yes && enable_static=no
+	fi
+        ;;
+    esac
+    AC_MSG_RESULT([$enable_shared])
+
+    AC_MSG_CHECKING([whether to build static libraries])
+    # Make sure either enable_shared or enable_static is yes.
+    test "$enable_shared" = yes || enable_static=yes
+    AC_MSG_RESULT([$enable_static])
+
+    _LT_TAGVAR(GCC, $1)="$ac_cv_fc_compiler_gnu"
+    _LT_TAGVAR(LD, $1)="$LD"
+
+    ## CAVEAT EMPTOR:
+    ## There is no encapsulation within the following macros, do not change
+    ## the running order or otherwise move them around unless you know exactly
+    ## what you are doing...
+    _LT_SYS_HIDDEN_LIBDEPS($1)
+    _LT_COMPILER_PIC($1)
+    _LT_COMPILER_C_O($1)
+    _LT_COMPILER_FILE_LOCKS($1)
+    _LT_LINKER_SHLIBS($1)
+    _LT_SYS_DYNAMIC_LINKER($1)
+    _LT_LINKER_HARDCODE_LIBPATH($1)
+
+    _LT_CONFIG($1)
+  fi # test -n "$compiler"
+
+  GCC=$lt_save_GCC
+  CC="$lt_save_CC"
+fi # test "$_lt_disable_FC" != yes
+
+AC_LANG_POP
+])# _LT_LANG_FC_CONFIG
+
+
+# _LT_LANG_GCJ_CONFIG([TAG])
+# --------------------------
+# Ensure that the configuration variables for the GNU Java Compiler compiler
+# are suitably defined.  These variables are subsequently used by _LT_CONFIG
+# to write the compiler configuration to `libtool'.
+m4_defun([_LT_LANG_GCJ_CONFIG],
+[AC_REQUIRE([LT_PROG_GCJ])dnl
+AC_LANG_SAVE
+
+# Source file extension for Java test sources.
+ac_ext=java
+
+# Object file extension for compiled Java test sources.
+objext=o
+_LT_TAGVAR(objext, $1)=$objext
+
+# Code to be used in simple compile tests
+lt_simple_compile_test_code="class foo {}"
+
+# Code to be used in simple link tests
+lt_simple_link_test_code='public class conftest { public static void main(String[[]] argv) {}; }'
+
+# ltmain only uses $CC for tagged configurations so make sure $CC is set.
+_LT_TAG_COMPILER
+
+# save warnings/boilerplate of simple test code
+_LT_COMPILER_BOILERPLATE
+_LT_LINKER_BOILERPLATE
+
+# Allow CC to be a program name with arguments.
+lt_save_CC="$CC"
+lt_save_GCC=$GCC
+GCC=yes
+CC=${GCJ-"gcj"}
+compiler=$CC
+_LT_TAGVAR(compiler, $1)=$CC
+_LT_TAGVAR(LD, $1)="$LD"
+_LT_CC_BASENAME([$compiler])
 
-    case $host_os in
-      aix*)
-      # All AIX code is PIC.
-      if test "$host_cpu" = ia64; then
-	# AIX 5 now supports IA64 processor
-	_LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-      fi
-      ;;
+# GCJ did not exist at the time GCC didn't implicitly link libc in.
+_LT_TAGVAR(archive_cmds_need_lc, $1)=no
 
-    amigaos*)
-      # FIXME: we need at least 68020 code to build shared libraries, but
-      # adding the `-m68020' flag to GCC prevents building anything better,
-      # like `-m68040'.
-      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4'
-      ;;
+_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
 
-    beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
-      # PIC is the default for these OSes.
-      ;;
+if test -n "$compiler"; then
+  _LT_COMPILER_NO_RTTI($1)
+  _LT_COMPILER_PIC($1)
+  _LT_COMPILER_C_O($1)
+  _LT_COMPILER_FILE_LOCKS($1)
+  _LT_LINKER_SHLIBS($1)
+  _LT_LINKER_HARDCODE_LIBPATH($1)
 
-    mingw* | cygwin* | pw32* | os2*)
-      # This hack is so that the source file can tell whether it is being
-      # built for inclusion in a dll (and should export symbols for example).
-      # Although the cygwin gcc ignores -fPIC, still need this for old-style
-      # (--disable-auto-import) libraries
-      m4_if([$1], [GCJ], [],
-	[_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
-      ;;
+  _LT_CONFIG($1)
+fi
 
-    darwin* | rhapsody*)
-      # PIC is the default on this platform
-      # Common symbols not allowed in MH_DYLIB files
-      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'
-      ;;
+AC_LANG_RESTORE
 
-    interix[[3-9]]*)
-      # Interix 3.x gcc -fpic/-fPIC options generate broken code.
-      # Instead, we relocate shared libraries at runtime.
-      ;;
+GCC=$lt_save_GCC
+CC="$lt_save_CC"
+])# _LT_LANG_GCJ_CONFIG
 
-    msdosdjgpp*)
-      # Just because we use GCC doesn't mean we suddenly get shared libraries
-      # on systems that don't support them.
-      _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
-      enable_shared=no
-      ;;
 
-    sysv4*MP*)
-      if test -d /usr/nec; then
-	_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic
-      fi
-      ;;
+# _LT_LANG_RC_CONFIG([TAG])
+# -------------------------
+# Ensure that the configuration variables for the Windows resource compiler
+# are suitably defined.  These variables are subsequently used by _LT_CONFIG
+# to write the compiler configuration to `libtool'.
+m4_defun([_LT_LANG_RC_CONFIG],
+[AC_REQUIRE([LT_PROG_RC])dnl
+AC_LANG_SAVE
 
-    hpux*)
-      # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
-      # not for PA HP-UX.
-      case $host_cpu in
-      hppa*64*|ia64*)
-	# +Z the default
-	;;
-      *)
-	_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
-	;;
-      esac
-      ;;
+# Source file extension for RC test sources.
+ac_ext=rc
 
-    *)
-      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
-      ;;
-    esac
-  else
-    # PORTME Check for flag to pass linker flags through the system compiler.
-    case $host_os in
-    aix*)
-      _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-      if test "$host_cpu" = ia64; then
-	# AIX 5 now supports IA64 processor
-	_LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-      else
-	_LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp'
-      fi
-      ;;
-      darwin*)
-        # PIC is the default on this platform
-        # Common symbols not allowed in MH_DYLIB files
-       case $cc_basename in
-         xlc*)
-         _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-qnocommon'
-         _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-         ;;
-       esac
-       ;;
+# Object file extension for compiled RC test sources.
+objext=o
+_LT_TAGVAR(objext, $1)=$objext
 
-    mingw* | cygwin* | pw32* | os2*)
-      # This hack is so that the source file can tell whether it is being
-      # built for inclusion in a dll (and should export symbols for example).
-      m4_if([$1], [GCJ], [],
-	[_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
-      ;;
+# Code to be used in simple compile tests
+lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }'
 
-    hpux9* | hpux10* | hpux11*)
-      _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-      # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
-      # not for PA HP-UX.
-      case $host_cpu in
-      hppa*64*|ia64*)
-	# +Z the default
-	;;
-      *)
-	_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
-	;;
-      esac
-      # Is there a better lt_prog_compiler_static that works with the bundled CC?
-      _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
-      ;;
+# Code to be used in simple link tests
+lt_simple_link_test_code="$lt_simple_compile_test_code"
 
-    irix5* | irix6* | nonstopux*)
-      _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-      # PIC (with -KPIC) is the default.
-      _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
-      ;;
+# ltmain only uses $CC for tagged configurations so make sure $CC is set.
+_LT_TAG_COMPILER
 
-    newsos6)
-      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-      _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-      ;;
+# save warnings/boilerplate of simple test code
+_LT_COMPILER_BOILERPLATE
+_LT_LINKER_BOILERPLATE
 
-    linux* | k*bsd*-gnu)
-      case $cc_basename in
-      icc* | ecc*)
-	_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-	_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-	_LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static'
-        ;;
-      pgcc* | pgf77* | pgf90* | pgf95*)
-        # Portland Group compilers (*not* the Pentium gcc compiler,
-	# which looks to be a dead project)
-	_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-	_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fpic'
-	_LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-        ;;
-      ccc*)
-        _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-        # All Alpha code is PIC.
-        _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
-        ;;
-      *)
-        case `$CC -V 2>&1 | sed 5q` in
-	*Sun\ C*)
-	  # Sun C 5.9
-	  _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-	  _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-	  _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-	  ;;
-	*Sun\ F*)
-	  # Sun Fortran 8.3 passes all unrecognized flags to the linker
-	  _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-	  _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-	  _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)=''
-	  ;;
-	esac
-	;;
-      esac
-      ;;
+# Allow CC to be a program name with arguments.
+lt_save_CC="$CC"
+lt_save_GCC=$GCC
+GCC=
+CC=${RC-"windres"}
+compiler=$CC
+_LT_TAGVAR(compiler, $1)=$CC
+_LT_CC_BASENAME([$compiler])
+_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
 
-    osf3* | osf4* | osf5*)
-      _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-      # All OSF/1 code is PIC.
-      _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
-      ;;
+if test -n "$compiler"; then
+  :
+  _LT_CONFIG($1)
+fi
 
-    rdos*)
-      _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
-      ;;
+GCC=$lt_save_GCC
+AC_LANG_RESTORE
+CC="$lt_save_CC"
+])# _LT_LANG_RC_CONFIG
 
-    solaris*)
-      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-      _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-      case $cc_basename in
-      f77* | f90* | f95*)
-	_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ';;
-      *)
-	_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,';;
-      esac
-      ;;
 
-    sunos4*)
-      _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
-      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
-      _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-      ;;
+# LT_PROG_GCJ
+# -----------
+AC_DEFUN([LT_PROG_GCJ],
+[m4_ifdef([AC_PROG_GCJ], [AC_PROG_GCJ],
+  [m4_ifdef([A][M_PROG_GCJ], [A][M_PROG_GCJ],
+    [AC_CHECK_TOOL(GCJ, gcj,)
+      test "x${GCJFLAGS+set}" = xset || GCJFLAGS="-g -O2"
+      AC_SUBST(GCJFLAGS)])])[]dnl
+])
 
-    sysv4 | sysv4.2uw2* | sysv4.3*)
-      _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-      _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-      ;;
+# Old name:
+AU_ALIAS([LT_AC_PROG_GCJ], [LT_PROG_GCJ])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([LT_AC_PROG_GCJ], [])
 
-    sysv4*MP*)
-      if test -d /usr/nec ;then
-	_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-Kconform_pic'
-	_LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-      fi
-      ;;
 
-    sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
-      _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-      _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-      ;;
+# LT_PROG_RC
+# ----------
+AC_DEFUN([LT_PROG_RC],
+[AC_CHECK_TOOL(RC, windres,)
+])
 
-    unicos*)
-      _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-      _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
-      ;;
+# Old name:
+AU_ALIAS([LT_AC_PROG_RC], [LT_PROG_RC])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([LT_AC_PROG_RC], [])
 
-    uts4*)
-      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
-      _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-      ;;
 
-    *)
-      _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
-      ;;
-    esac
-  fi
+# _LT_DECL_EGREP
+# --------------
+# If we don't have a new enough Autoconf to choose the best grep
+# available, choose the one first in the user's PATH.
+m4_defun([_LT_DECL_EGREP],
+[AC_REQUIRE([AC_PROG_EGREP])dnl
+AC_REQUIRE([AC_PROG_FGREP])dnl
+test -z "$GREP" && GREP=grep
+_LT_DECL([], [GREP], [1], [A grep program that handles long lines])
+_LT_DECL([], [EGREP], [1], [An ERE matcher])
+_LT_DECL([], [FGREP], [1], [A literal string matcher])
+dnl Non-bleeding-edge autoconf doesn't subst GREP, so do it here too
+AC_SUBST([GREP])
 ])
-AC_MSG_RESULT([$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)])
 
-#
-# Check to make sure the PIC flag actually works.
-#
-if test -n "$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)"; then
-  AC_LIBTOOL_COMPILER_OPTION([if $compiler PIC flag $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) works],
-    _LT_AC_TAGVAR(lt_cv_prog_compiler_pic_works, $1),
-    [$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)ifelse([$1],[],[ -DPIC],[ifelse([$1],[CXX],[ -DPIC],[])])], [],
-    [case $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) in
-     "" | " "*) ;;
-     *) _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=" $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)" ;;
-     esac],
-    [_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
-     _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no])
-fi
-case $host_os in
-  # For platforms which do not support PIC, -DPIC is meaningless:
-  *djgpp*)
-    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
-    ;;
-  *)
-    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)="$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)ifelse([$1],[],[ -DPIC],[ifelse([$1],[CXX],[ -DPIC],[])])"
-    ;;
-esac
 
-#
-# Check to make sure the static flag actually works.
-#
-wl=$_LT_AC_TAGVAR(lt_prog_compiler_wl, $1) eval lt_tmp_static_flag=\"$_LT_AC_TAGVAR(lt_prog_compiler_static, $1)\"
-AC_LIBTOOL_LINKER_OPTION([if $compiler static flag $lt_tmp_static_flag works],
-  _LT_AC_TAGVAR(lt_cv_prog_compiler_static_works, $1),
-  $lt_tmp_static_flag,
-  [],
-  [_LT_AC_TAGVAR(lt_prog_compiler_static, $1)=])
+# _LT_DECL_OBJDUMP
+# --------------
+# If we don't have a new enough Autoconf to choose the best objdump
+# available, choose the one first in the user's PATH.
+m4_defun([_LT_DECL_OBJDUMP],
+[AC_CHECK_TOOL(OBJDUMP, objdump, false)
+test -z "$OBJDUMP" && OBJDUMP=objdump
+_LT_DECL([], [OBJDUMP], [1], [An object symbol dumper])
+AC_SUBST([OBJDUMP])
+])
+
+
+# _LT_DECL_SED
+# ------------
+# Check for a fully-functional sed program, that truncates
+# as few characters as possible.  Prefer GNU sed if found.
+m4_defun([_LT_DECL_SED],
+[AC_PROG_SED
+test -z "$SED" && SED=sed
+Xsed="$SED -e 1s/^X//"
+_LT_DECL([], [SED], [1], [A sed program that does not truncate output])
+_LT_DECL([], [Xsed], ["\$SED -e 1s/^X//"],
+    [Sed that helps us avoid accidentally triggering echo(1) options like -n])
+])# _LT_DECL_SED
+
+m4_ifndef([AC_PROG_SED], [
+# NOTE: This macro has been submitted for inclusion into   #
+#  GNU Autoconf as AC_PROG_SED.  When it is available in   #
+#  a released version of Autoconf we should remove this    #
+#  macro and use it instead.                               #
+
+m4_defun([AC_PROG_SED],
+[AC_MSG_CHECKING([for a sed that does not truncate output])
+AC_CACHE_VAL(lt_cv_path_SED,
+[# Loop through the user's path and test for sed and gsed.
+# Then use that list of sed's as ones to test for truncation.
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for lt_ac_prog in sed gsed; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
+      if $as_executable_p "$as_dir/$lt_ac_prog$ac_exec_ext"; then
+        lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext"
+      fi
+    done
+  done
+done
+IFS=$as_save_IFS
+lt_ac_max=0
+lt_ac_count=0
+# Add /usr/xpg4/bin/sed as it is typically found on Solaris
+# along with /bin/sed that truncates output.
+for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do
+  test ! -f $lt_ac_sed && continue
+  cat /dev/null > conftest.in
+  lt_ac_count=0
+  echo $ECHO_N "0123456789$ECHO_C" >conftest.in
+  # Check for GNU sed and select it if it is found.
+  if "$lt_ac_sed" --version 2>&1 < /dev/null | grep 'GNU' > /dev/null; then
+    lt_cv_path_SED=$lt_ac_sed
+    break
+  fi
+  while true; do
+    cat conftest.in conftest.in >conftest.tmp
+    mv conftest.tmp conftest.in
+    cp conftest.in conftest.nl
+    echo >>conftest.nl
+    $lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break
+    cmp -s conftest.out conftest.nl || break
+    # 10000 chars as input seems more than enough
+    test $lt_ac_count -gt 10 && break
+    lt_ac_count=`expr $lt_ac_count + 1`
+    if test $lt_ac_count -gt $lt_ac_max; then
+      lt_ac_max=$lt_ac_count
+      lt_cv_path_SED=$lt_ac_sed
+    fi
+  done
+done
 ])
+SED=$lt_cv_path_SED
+AC_SUBST([SED])
+AC_MSG_RESULT([$SED])
+])#AC_PROG_SED
+])#m4_ifndef
+
+# Old name:
+AU_ALIAS([LT_AC_PROG_SED], [AC_PROG_SED])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([LT_AC_PROG_SED], [])
 
 
-# AC_LIBTOOL_PROG_LD_SHLIBS([TAGNAME])
-# ------------------------------------
-# See if the linker supports building shared libraries.
-AC_DEFUN([AC_LIBTOOL_PROG_LD_SHLIBS],
-[AC_REQUIRE([LT_AC_PROG_SED])dnl
-AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries])
-ifelse([$1],[CXX],[
-  _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
-  case $host_os in
-  aix[[4-9]]*)
-    # If we're using GNU nm, then we don't want the "-C" option.
-    # -C means demangle to AIX nm, but means don't demangle with GNU nm
-    if $NM -V 2>&1 | grep 'GNU' > /dev/null; then
-      _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols'
-    else
-      _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols'
-    fi
-    ;;
-  pw32*)
-    _LT_AC_TAGVAR(export_symbols_cmds, $1)="$ltdll_cmds"
-  ;;
-  cygwin* | mingw*)
-    _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;/^.*[[ ]]__nm__/s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.*[[ ]]//'\'' | sort | uniq > $export_symbols'
-  ;;
-  linux* | k*bsd*-gnu)
-    _LT_AC_TAGVAR(link_all_deplibs, $1)=no
-  ;;
-  *)
-    _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+# _LT_CHECK_SHELL_FEATURES
+# ------------------------
+# Find out whether the shell is Bourne or XSI compatible,
+# or has some other useful features.
+m4_defun([_LT_CHECK_SHELL_FEATURES],
+[AC_MSG_CHECKING([whether the shell understands some XSI constructs])
+# Try some XSI features
+xsi_shell=no
+( _lt_dummy="a/b/c"
+  test "${_lt_dummy##*/},${_lt_dummy%/*},"${_lt_dummy%"$_lt_dummy"}, \
+      = c,a/b,, \
+    && eval 'test $(( 1 + 1 )) -eq 2 \
+    && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \
+  && xsi_shell=yes
+AC_MSG_RESULT([$xsi_shell])
+_LT_CONFIG_LIBTOOL_INIT([xsi_shell='$xsi_shell'])
+
+AC_MSG_CHECKING([whether the shell understands "+="])
+lt_shell_append=no
+( foo=bar; set foo baz; eval "$[1]+=\$[2]" && test "$foo" = barbaz ) \
+    >/dev/null 2>&1 \
+  && lt_shell_append=yes
+AC_MSG_RESULT([$lt_shell_append])
+_LT_CONFIG_LIBTOOL_INIT([lt_shell_append='$lt_shell_append'])
+
+if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
+  lt_unset=unset
+else
+  lt_unset=false
+fi
+_LT_DECL([], [lt_unset], [0], [whether the shell understands "unset"])dnl
+
+# test EBCDIC or ASCII
+case `echo X|tr X '\101'` in
+ A) # ASCII based system
+    # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr
+  lt_SP2NL='tr \040 \012'
+  lt_NL2SP='tr \015\012 \040\040'
+  ;;
+ *) # EBCDIC based system
+  lt_SP2NL='tr \100 \n'
+  lt_NL2SP='tr \r\n \100\100'
   ;;
+esac
+_LT_DECL([SP2NL], [lt_SP2NL], [1], [turn spaces into newlines])dnl
+_LT_DECL([NL2SP], [lt_NL2SP], [1], [turn newlines into spaces])dnl
+])# _LT_CHECK_SHELL_FEATURES
+
+
+# _LT_PROG_XSI_SHELLFNS
+# ---------------------
+# Bourne and XSI compatible variants of some useful shell functions.
+m4_defun([_LT_PROG_XSI_SHELLFNS],
+[case $xsi_shell in
+  yes)
+    cat << \_LT_EOF >> "$cfgfile"
+
+# func_dirname file append nondir_replacement
+# Compute the dirname of FILE.  If nonempty, add APPEND to the result,
+# otherwise set result to NONDIR_REPLACEMENT.
+func_dirname ()
+{
+  case ${1} in
+    */*) func_dirname_result="${1%/*}${2}" ;;
+    *  ) func_dirname_result="${3}" ;;
   esac
-  _LT_AC_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*']
-],[
-  runpath_var=
-  _LT_AC_TAGVAR(allow_undefined_flag, $1)=
-  _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=no
-  _LT_AC_TAGVAR(archive_cmds, $1)=
-  _LT_AC_TAGVAR(archive_expsym_cmds, $1)=
-  _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)=
-  _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1)=
-  _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=
-  _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
-  _LT_AC_TAGVAR(thread_safe_flag_spec, $1)=
-  _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=
-  _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
-  _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
-  _LT_AC_TAGVAR(hardcode_direct, $1)=no
-  _LT_AC_TAGVAR(hardcode_minus_L, $1)=no
-  _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
-  _LT_AC_TAGVAR(link_all_deplibs, $1)=unknown
-  _LT_AC_TAGVAR(hardcode_automatic, $1)=no
-  _LT_AC_TAGVAR(module_cmds, $1)=
-  _LT_AC_TAGVAR(module_expsym_cmds, $1)=
-  _LT_AC_TAGVAR(always_export_symbols, $1)=no
-  _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
-  # include_expsyms should be a list of space-separated symbols to be *always*
-  # included in the symbol list
-  _LT_AC_TAGVAR(include_expsyms, $1)=
-  # exclude_expsyms can be an extended regexp of symbols to exclude
-  # it will be wrapped by ` (' and `)$', so one must not match beginning or
-  # end of line.  Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
-  # as well as any symbol that contains `d'.
-  _LT_AC_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*']
-  # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
-  # platforms (ab)use it in PIC code, but their linkers get confused if
-  # the symbol is explicitly referenced.  Since portable code cannot
-  # rely on this symbol name, it's probably fine to never include it in
-  # preloaded symbol tables.
-  # Exclude shared library initialization/finalization symbols.
-dnl Note also adjust exclude_expsyms for C++ above.
-  extract_expsyms_cmds=
-  # Just being paranoid about ensuring that cc_basename is set.
-  _LT_CC_BASENAME([$compiler])
-  case $host_os in
-  cygwin* | mingw* | pw32*)
-    # FIXME: the MSVC++ port hasn't been tested in a loooong time
-    # When not using gcc, we currently assume that we are using
-    # Microsoft Visual C++.
-    if test "$GCC" != yes; then
-      with_gnu_ld=no
-    fi
-    ;;
-  interix*)
-    # we just hope/assume this is gcc and not c89 (= MSVC++)
-    with_gnu_ld=yes
-    ;;
-  openbsd*)
-    with_gnu_ld=no
-    ;;
+}
+
+# func_basename file
+func_basename ()
+{
+  func_basename_result="${1##*/}"
+}
+
+# func_dirname_and_basename file append nondir_replacement
+# perform func_basename and func_dirname in a single function
+# call:
+#   dirname:  Compute the dirname of FILE.  If nonempty,
+#             add APPEND to the result, otherwise set result
+#             to NONDIR_REPLACEMENT.
+#             value returned in "$func_dirname_result"
+#   basename: Compute filename of FILE.
+#             value retuned in "$func_basename_result"
+# Implementation must be kept synchronized with func_dirname
+# and func_basename. For efficiency, we do not delegate to
+# those functions but instead duplicate the functionality here.
+func_dirname_and_basename ()
+{
+  case ${1} in
+    */*) func_dirname_result="${1%/*}${2}" ;;
+    *  ) func_dirname_result="${3}" ;;
   esac
+  func_basename_result="${1##*/}"
+}
 
-  _LT_AC_TAGVAR(ld_shlibs, $1)=yes
-  if test "$with_gnu_ld" = yes; then
-    # If archive_cmds runs LD, not CC, wlarc should be empty
-    wlarc='${wl}'
+# func_stripname prefix suffix name
+# strip PREFIX and SUFFIX off of NAME.
+# PREFIX and SUFFIX must not contain globbing or regex special
+# characters, hashes, percent signs, but SUFFIX may contain a leading
+# dot (in which case that matches only a dot).
+func_stripname ()
+{
+  # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are
+  # positional parameters, so assign one to ordinary parameter first.
+  func_stripname_result=${3}
+  func_stripname_result=${func_stripname_result#"${1}"}
+  func_stripname_result=${func_stripname_result%"${2}"}
+}
 
-    # Set some defaults for GNU ld with shared library support. These
-    # are reset later if shared libraries are not supported. Putting them
-    # here allows them to be overridden if necessary.
-    runpath_var=LD_RUN_PATH
-    _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir'
-    _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
-    # ancient GNU ld didn't support --whole-archive et. al.
-    if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then
-	_LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
-      else
-  	_LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
-    fi
-    supports_anon_versioning=no
-    case `$LD -v 2>/dev/null` in
-      *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.10.*) ;; # catch versions < 2.11
-      *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
-      *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
-      *\ 2.11.*) ;; # other 2.11 versions
-      *) supports_anon_versioning=yes ;;
-    esac
+# func_opt_split
+func_opt_split ()
+{
+  func_opt_split_opt=${1%%=*}
+  func_opt_split_arg=${1#*=}
+}
 
-    # See if GNU ld supports shared libraries.
-    case $host_os in
-    aix[[3-9]]*)
-      # On AIX/PPC, the GNU linker is very broken
-      if test "$host_cpu" != ia64; then
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
-	cat <<EOF 1>&2
+# func_lo2o object
+func_lo2o ()
+{
+  case ${1} in
+    *.lo) func_lo2o_result=${1%.lo}.${objext} ;;
+    *)    func_lo2o_result=${1} ;;
+  esac
+}
 
-*** Warning: the GNU linker, at least up to release 2.9.1, is reported
-*** to be unable to reliably create shared libraries on AIX.
-*** Therefore, libtool is disabling shared libraries support.  If you
-*** really care for shared libraries, you may want to modify your PATH
-*** so that a non-GNU linker is found, and then restart.
+# func_xform libobj-or-source
+func_xform ()
+{
+  func_xform_result=${1%.*}.lo
+}
 
-EOF
-      fi
-      ;;
+# func_arith arithmetic-term...
+func_arith ()
+{
+  func_arith_result=$(( $[*] ))
+}
 
-    amigaos*)
-      _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-      _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-
-      # Samuel A. Falvo II <kc5tja@dolphin.openprojects.net> reports
-      # that the semantics of dynamic libraries on AmigaOS, at least up
-      # to version 4, is to share data among multiple programs linked
-      # with the same dynamic library.  Since this doesn't match the
-      # behavior of shared libraries on other platforms, we can't use
-      # them.
-      _LT_AC_TAGVAR(ld_shlibs, $1)=no
-      ;;
+# func_len string
+# STRING may not start with a hyphen.
+func_len ()
+{
+  func_len_result=${#1}
+}
 
-    beos*)
-      if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-	_LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
-	# Joseph Beckenbach <jrb3@best.com> says some releases of gcc
-	# support --undefined.  This deserves some investigation.  FIXME
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-      else
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
-      fi
-      ;;
+_LT_EOF
+    ;;
+  *) # Bourne compatible functions.
+    cat << \_LT_EOF >> "$cfgfile"
 
-    cygwin* | mingw* | pw32*)
-      # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
-      # as there is no search path for DLLs.
-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-      _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
-      _LT_AC_TAGVAR(always_export_symbols, $1)=no
-      _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
-      _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/'\'' -e '\''/^[[AITW]][[ ]]/s/.*[[ ]]//'\'' | sort | uniq > $export_symbols'
+# func_dirname file append nondir_replacement
+# Compute the dirname of FILE.  If nonempty, add APPEND to the result,
+# otherwise set result to NONDIR_REPLACEMENT.
+func_dirname ()
+{
+  # Extract subdirectory from the argument.
+  func_dirname_result=`$ECHO "X${1}" | $Xsed -e "$dirname"`
+  if test "X$func_dirname_result" = "X${1}"; then
+    func_dirname_result="${3}"
+  else
+    func_dirname_result="$func_dirname_result${2}"
+  fi
+}
 
-      if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
-        _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
-	# If the export-symbols file already is a .def file (1st line
-	# is EXPORTS), use it as is; otherwise, prepend...
-	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
-	  cp $export_symbols $output_objdir/$soname.def;
-	else
-	  echo EXPORTS > $output_objdir/$soname.def;
-	  cat $export_symbols >> $output_objdir/$soname.def;
-	fi~
-	$CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
-      else
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
-      fi
-      ;;
+# func_basename file
+func_basename ()
+{
+  func_basename_result=`$ECHO "X${1}" | $Xsed -e "$basename"`
+}
 
-    interix[[3-9]]*)
-      _LT_AC_TAGVAR(hardcode_direct, $1)=no
-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-      _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
-      # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
-      # Instead, shared libraries are loaded at an image base (0x10000000 by
-      # default) and relocated if they conflict, which is a slow very memory
-      # consuming and fragmenting process.  To avoid this, we pick a random,
-      # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
-      # time.  Moving up from 0x10000000 also allows more sbrk(2) space.
-      _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
-      _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
-      ;;
+dnl func_dirname_and_basename
+dnl A portable version of this function is already defined in general.m4sh
+dnl so there is no need for it here.
+
+# func_stripname prefix suffix name
+# strip PREFIX and SUFFIX off of NAME.
+# PREFIX and SUFFIX must not contain globbing or regex special
+# characters, hashes, percent signs, but SUFFIX may contain a leading
+# dot (in which case that matches only a dot).
+# func_strip_suffix prefix name
+func_stripname ()
+{
+  case ${2} in
+    .*) func_stripname_result=`$ECHO "X${3}" \
+           | $Xsed -e "s%^${1}%%" -e "s%\\\\${2}\$%%"`;;
+    *)  func_stripname_result=`$ECHO "X${3}" \
+           | $Xsed -e "s%^${1}%%" -e "s%${2}\$%%"`;;
+  esac
+}
 
-    gnu* | linux* | k*bsd*-gnu)
-      if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-	tmp_addflag=
-	case $cc_basename,$host_cpu in
-	pgcc*)				# Portland Group C compiler
-	  _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
-	  tmp_addflag=' $pic_flag'
-	  ;;
-	pgf77* | pgf90* | pgf95*)	# Portland Group f77 and f90 compilers
-	  _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
-	  tmp_addflag=' $pic_flag -Mnomain' ;;
-	ecc*,ia64* | icc*,ia64*)		# Intel C compiler on ia64
-	  tmp_addflag=' -i_dynamic' ;;
-	efc*,ia64* | ifort*,ia64*)	# Intel Fortran compiler on ia64
-	  tmp_addflag=' -i_dynamic -nofor_main' ;;
-	ifc* | ifort*)			# Intel Fortran compiler
-	  tmp_addflag=' -nofor_main' ;;
-	esac
-	case `$CC -V 2>&1 | sed 5q` in
-	*Sun\ C*)			# Sun C 5.9
-	  _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
-	  tmp_sharedflag='-G' ;;
-	*Sun\ F*)			# Sun Fortran 8.3
-	  tmp_sharedflag='-G' ;;
-	*)
-	  tmp_sharedflag='-shared' ;;
-	esac
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+# sed scripts:
+my_sed_long_opt='1s/^\(-[[^=]]*\)=.*/\1/;q'
+my_sed_long_arg='1s/^-[[^=]]*=//'
 
-	if test $supports_anon_versioning = yes; then
-	  _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $output_objdir/$libname.ver~
-  cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
-  $echo "local: *; };" >> $output_objdir/$libname.ver~
-	  $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
-	fi
-	_LT_AC_TAGVAR(link_all_deplibs, $1)=no
-      else
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
-      fi
-      ;;
+# func_opt_split
+func_opt_split ()
+{
+  func_opt_split_opt=`$ECHO "X${1}" | $Xsed -e "$my_sed_long_opt"`
+  func_opt_split_arg=`$ECHO "X${1}" | $Xsed -e "$my_sed_long_arg"`
+}
 
-    netbsd*)
-      if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-	_LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
-	wlarc=
-      else
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-      fi
-      ;;
+# func_lo2o object
+func_lo2o ()
+{
+  func_lo2o_result=`$ECHO "X${1}" | $Xsed -e "$lo2o"`
+}
 
-    solaris*)
-      if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
-	cat <<EOF 1>&2
+# func_xform libobj-or-source
+func_xform ()
+{
+  func_xform_result=`$ECHO "X${1}" | $Xsed -e 's/\.[[^.]]*$/.lo/'`
+}
 
-*** Warning: The releases 2.8.* of the GNU linker cannot reliably
-*** create shared libraries on Solaris systems.  Therefore, libtool
-*** is disabling shared libraries support.  We urge you to upgrade GNU
-*** binutils to release 2.9.1 or newer.  Another option is to modify
-*** your PATH or compiler configuration so that the native linker is
-*** used, and then restart.
+# func_arith arithmetic-term...
+func_arith ()
+{
+  func_arith_result=`expr "$[@]"`
+}
 
-EOF
-      elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-      else
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
-      fi
-      ;;
+# func_len string
+# STRING may not start with a hyphen.
+func_len ()
+{
+  func_len_result=`expr "$[1]" : ".*" 2>/dev/null || echo $max_cmd_len`
+}
 
-    sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
-      case `$LD -v 2>&1` in
-        *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.1[[0-5]].*)
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
-	cat <<_LT_EOF 1>&2
+_LT_EOF
+esac
 
-*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not
-*** reliably create shared libraries on SCO systems.  Therefore, libtool
-*** is disabling shared libraries support.  We urge you to upgrade GNU
-*** binutils to release 2.16.91.0.3 or newer.  Another option is to modify
-*** your PATH or compiler configuration so that the native linker is
-*** used, and then restart.
+case $lt_shell_append in
+  yes)
+    cat << \_LT_EOF >> "$cfgfile"
+
+# func_append var value
+# Append VALUE to the end of shell variable VAR.
+func_append ()
+{
+  eval "$[1]+=\$[2]"
+}
+_LT_EOF
+    ;;
+  *)
+    cat << \_LT_EOF >> "$cfgfile"
+
+# func_append var value
+# Append VALUE to the end of shell variable VAR.
+func_append ()
+{
+  eval "$[1]=\$$[1]\$[2]"
+}
 
 _LT_EOF
-	;;
-	*)
-	  if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-	    _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='`test -z "$SCOABSPATH" && echo ${wl}-rpath,$libdir`'
-	    _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib'
-	    _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname,-retain-symbols-file,$export_symbols -o $lib'
-	  else
-	    _LT_AC_TAGVAR(ld_shlibs, $1)=no
-	  fi
-	;;
-      esac
-      ;;
+    ;;
+  esac
+])
 
-    sunos4*)
-      _LT_AC_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-      wlarc=
-      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-      ;;
+# Helper functions for option handling.                    -*- Autoconf -*-
+#
+#   Copyright (C) 2004, 2005, 2007, 2008 Free Software Foundation, Inc.
+#   Written by Gary V. Vaughan, 2004
+#
+# This file is free software; the Free Software Foundation gives
+# unlimited permission to copy and/or distribute it, with or without
+# modifications, as long as this notice is preserved.
 
-    *)
-      if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-      else
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
-      fi
-      ;;
-    esac
+# serial 6 ltoptions.m4
 
-    if test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no; then
-      runpath_var=
-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=
-      _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=
-      _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
-    fi
-  else
-    # PORTME fill in a description of your system's linker (not GNU ld)
-    case $host_os in
-    aix3*)
-      _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
-      _LT_AC_TAGVAR(always_export_symbols, $1)=yes
-      _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
-      # Note: this linker hardcodes the directories in LIBPATH if there
-      # are no directories specified by -L.
-      _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-      if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then
-	# Neither direct hardcoding nor static linking is supported with a
-	# broken collect2.
-	_LT_AC_TAGVAR(hardcode_direct, $1)=unsupported
-      fi
-      ;;
+# This is to help aclocal find these macros, as it can't see m4_define.
+AC_DEFUN([LTOPTIONS_VERSION], [m4_if([1])])
+
+
+# _LT_MANGLE_OPTION(MACRO-NAME, OPTION-NAME)
+# ------------------------------------------
+m4_define([_LT_MANGLE_OPTION],
+[[_LT_OPTION_]m4_bpatsubst($1__$2, [[^a-zA-Z0-9_]], [_])])
 
-    aix[[4-9]]*)
-      if test "$host_cpu" = ia64; then
-	# On IA64, the linker does run time linking by default, so we don't
-	# have to do anything special.
-	aix_use_runtimelinking=no
-	exp_sym_flag='-Bexport'
-	no_entry_flag=""
-      else
-	# If we're using GNU nm, then we don't want the "-C" option.
-	# -C means demangle to AIX nm, but means don't demangle with GNU nm
-	if $NM -V 2>&1 | grep 'GNU' > /dev/null; then
-	  _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols'
-	else
-	  _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols'
-	fi
-	aix_use_runtimelinking=no
 
-	# Test if we are trying to use run time linking or normal
-	# AIX style linking. If -brtl is somewhere in LDFLAGS, we
-	# need to do runtime linking.
-	case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*)
-	  for ld_flag in $LDFLAGS; do
-  	  if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
-  	    aix_use_runtimelinking=yes
-  	    break
-  	  fi
-	  done
-	  ;;
-	esac
+# _LT_SET_OPTION(MACRO-NAME, OPTION-NAME)
+# ---------------------------------------
+# Set option OPTION-NAME for macro MACRO-NAME, and if there is a
+# matching handler defined, dispatch to it.  Other OPTION-NAMEs are
+# saved as a flag.
+m4_define([_LT_SET_OPTION],
+[m4_define(_LT_MANGLE_OPTION([$1], [$2]))dnl
+m4_ifdef(_LT_MANGLE_DEFUN([$1], [$2]),
+        _LT_MANGLE_DEFUN([$1], [$2]),
+    [m4_warning([Unknown $1 option `$2'])])[]dnl
+])
 
-	exp_sym_flag='-bexport'
-	no_entry_flag='-bnoentry'
-      fi
 
-      # When large executables or shared objects are built, AIX ld can
-      # have problems creating the table of contents.  If linking a library
-      # or program results in "error TOC overflow" add -mminimal-toc to
-      # CXXFLAGS/CFLAGS for g++/gcc.  In the cases where that is not
-      # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
+# _LT_IF_OPTION(MACRO-NAME, OPTION-NAME, IF-SET, [IF-NOT-SET])
+# ------------------------------------------------------------
+# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise.
+m4_define([_LT_IF_OPTION],
+[m4_ifdef(_LT_MANGLE_OPTION([$1], [$2]), [$3], [$4])])
 
-      _LT_AC_TAGVAR(archive_cmds, $1)=''
-      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-      _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':'
-      _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
 
-      if test "$GCC" = yes; then
-	case $host_os in aix4.[[012]]|aix4.[[012]].*)
-	# We only want to do this on AIX 4.2 and lower, the check
-	# below for broken collect2 doesn't work under 4.3+
-	  collect2name=`${CC} -print-prog-name=collect2`
-	  if test -f "$collect2name" && \
-  	   strings "$collect2name" | grep resolve_lib_name >/dev/null
-	  then
-  	  # We have reworked collect2
-  	  :
-	  else
-  	  # We have old collect2
-  	  _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported
-  	  # It fails to find uninstalled libraries when the uninstalled
-  	  # path is not listed in the libpath.  Setting hardcode_minus_L
-  	  # to unsupported forces relinking
-  	  _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-  	  _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-  	  _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
-	  fi
-	  ;;
-	esac
-	shared_flag='-shared'
-	if test "$aix_use_runtimelinking" = yes; then
-	  shared_flag="$shared_flag "'${wl}-G'
-	fi
-      else
-	# not using gcc
-	if test "$host_cpu" = ia64; then
-  	# VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
-  	# chokes on -Wl,-G. The following line is correct:
-	  shared_flag='-G'
-	else
-	  if test "$aix_use_runtimelinking" = yes; then
-	    shared_flag='${wl}-G'
-	  else
-	    shared_flag='${wl}-bM:SRE'
-	  fi
-	fi
-      fi
+# _LT_UNLESS_OPTIONS(MACRO-NAME, OPTION-LIST, IF-NOT-SET)
+# -------------------------------------------------------
+# Execute IF-NOT-SET unless all options in OPTION-LIST for MACRO-NAME
+# are set.
+m4_define([_LT_UNLESS_OPTIONS],
+[m4_foreach([_LT_Option], m4_split(m4_normalize([$2])),
+	    [m4_ifdef(_LT_MANGLE_OPTION([$1], _LT_Option),
+		      [m4_define([$0_found])])])[]dnl
+m4_ifdef([$0_found], [m4_undefine([$0_found])], [$3
+])[]dnl
+])
 
-      # It seems that -bexpall does not export symbols beginning with
-      # underscore (_), so it is better to generate a list of symbols to export.
-      _LT_AC_TAGVAR(always_export_symbols, $1)=yes
-      if test "$aix_use_runtimelinking" = yes; then
-	# Warning - without using the other runtime loading flags (-brtl),
-	# -berok will link without error, but may produce a broken library.
-	_LT_AC_TAGVAR(allow_undefined_flag, $1)='-berok'
-       # Determine the default libpath from the value encoded in an empty executable.
-       _LT_AC_SYS_LIBPATH_AIX
-       _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
-	_LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
-       else
-	if test "$host_cpu" = ia64; then
-	  _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
-	  _LT_AC_TAGVAR(allow_undefined_flag, $1)="-z nodefs"
-	  _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
-	else
-	 # Determine the default libpath from the value encoded in an empty executable.
-	 _LT_AC_SYS_LIBPATH_AIX
-	 _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
-	  # Warning - without using the other run time loading flags,
-	  # -berok will link without error, but may produce a broken library.
-	  _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
-	  _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
-	  # Exported symbols can be pulled into shared objects from archives
-	  _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
-	  _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes
-	  # This is similar to how AIX traditionally builds its shared libraries.
-	  _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
-	fi
-      fi
-      ;;
 
-    amigaos*)
-      _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-      _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-      # see comment about different semantics on the GNU ld section
-      _LT_AC_TAGVAR(ld_shlibs, $1)=no
-      ;;
+# _LT_SET_OPTIONS(MACRO-NAME, OPTION-LIST)
+# ----------------------------------------
+# OPTION-LIST is a space-separated list of Libtool options associated
+# with MACRO-NAME.  If any OPTION has a matching handler declared with
+# LT_OPTION_DEFINE, dispatch to that macro; otherwise complain about
+# the unknown option and exit.
+m4_defun([_LT_SET_OPTIONS],
+[# Set options
+m4_foreach([_LT_Option], m4_split(m4_normalize([$2])),
+    [_LT_SET_OPTION([$1], _LT_Option)])
+
+m4_if([$1],[LT_INIT],[
+  dnl
+  dnl Simply set some default values (i.e off) if boolean options were not
+  dnl specified:
+  _LT_UNLESS_OPTIONS([LT_INIT], [dlopen], [enable_dlopen=no
+  ])
+  _LT_UNLESS_OPTIONS([LT_INIT], [win32-dll], [enable_win32_dll=no
+  ])
+  dnl
+  dnl If no reference was made to various pairs of opposing options, then
+  dnl we run the default mode handler for the pair.  For example, if neither
+  dnl `shared' nor `disable-shared' was passed, we enable building of shared
+  dnl archives by default:
+  _LT_UNLESS_OPTIONS([LT_INIT], [shared disable-shared], [_LT_ENABLE_SHARED])
+  _LT_UNLESS_OPTIONS([LT_INIT], [static disable-static], [_LT_ENABLE_STATIC])
+  _LT_UNLESS_OPTIONS([LT_INIT], [pic-only no-pic], [_LT_WITH_PIC])
+  _LT_UNLESS_OPTIONS([LT_INIT], [fast-install disable-fast-install],
+  		   [_LT_ENABLE_FAST_INSTALL])
+  ])
+])# _LT_SET_OPTIONS
 
-    bsdi[[45]]*)
-      _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=-rdynamic
-      ;;
 
-    cygwin* | mingw* | pw32*)
-      # When not using gcc, we currently assume that we are using
-      # Microsoft Visual C++.
-      # hardcode_libdir_flag_spec is actually meaningless, as there is
-      # no search path for DLLs.
-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=' '
-      _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
-      # Tell ltmain to make .lib files, not .a files.
-      libext=lib
-      # Tell ltmain to make .dll files, not .so files.
-      shrext_cmds=".dll"
-      # FIXME: Setting linknames here is a bad hack.
-      _LT_AC_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames='
-      # The linker will automatically build a .lib file if we build a DLL.
-      _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)='true'
-      # FIXME: Should let the user specify the lib program.
-      _LT_AC_TAGVAR(old_archive_cmds, $1)='lib -OUT:$oldlib$oldobjs$old_deplibs'
-      _LT_AC_TAGVAR(fix_srcfile_path, $1)='`cygpath -w "$srcfile"`'
-      _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
-      ;;
 
-    darwin* | rhapsody*)
-      case $host_os in
-        rhapsody* | darwin1.[[012]])
-         _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-undefined ${wl}suppress'
-         ;;
-       *) # Darwin 1.3 on
-         if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then
-           _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
-         else
-           case ${MACOSX_DEPLOYMENT_TARGET} in
-             10.[[012]])
-               _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
-               ;;
-             10.*)
-               _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-undefined ${wl}dynamic_lookup'
-               ;;
-           esac
-         fi
-         ;;
-      esac
-      _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-      _LT_AC_TAGVAR(hardcode_direct, $1)=no
-      _LT_AC_TAGVAR(hardcode_automatic, $1)=yes
-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
-      _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=''
-      _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
-    if test "$GCC" = yes ; then
-    	output_verbose_link_cmd='echo'
-        _LT_AC_TAGVAR(archive_cmds, $1)="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}"
-        _LT_AC_TAGVAR(module_cmds, $1)="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}"
-        _LT_AC_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}"
-        _LT_AC_TAGVAR(module_expsym_cmds, $1)="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}"
-    else
-      case $cc_basename in
-        xlc*)
-         output_verbose_link_cmd='echo'
-         _LT_AC_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $xlcverstring'
-         _LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
-          # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
-         _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $xlcverstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-          _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag  -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-          ;;
-       *)
-         _LT_AC_TAGVAR(ld_shlibs, $1)=no
-          ;;
-      esac
-    fi
-      ;;
+# _LT_MANGLE_DEFUN(MACRO-NAME, OPTION-NAME)
+# -----------------------------------------
+m4_define([_LT_MANGLE_DEFUN],
+[[_LT_OPTION_DEFUN_]m4_bpatsubst(m4_toupper([$1__$2]), [[^A-Z0-9_]], [_])])
 
-    dgux*)
-      _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-      ;;
 
-    freebsd1*)
-      _LT_AC_TAGVAR(ld_shlibs, $1)=no
-      ;;
+# LT_OPTION_DEFINE(MACRO-NAME, OPTION-NAME, CODE)
+# -----------------------------------------------
+m4_define([LT_OPTION_DEFINE],
+[m4_define(_LT_MANGLE_DEFUN([$1], [$2]), [$3])[]dnl
+])# LT_OPTION_DEFINE
 
-    # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
-    # support.  Future versions do this automatically, but an explicit c++rt0.o
-    # does not break anything, and helps significantly (at the cost of a little
-    # extra space).
-    freebsd2.2*)
-      _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-      ;;
 
-    # Unfortunately, older versions of FreeBSD 2 do not have this feature.
-    freebsd2*)
-      _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-      _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-      ;;
+# dlopen
+# ------
+LT_OPTION_DEFINE([LT_INIT], [dlopen], [enable_dlopen=yes
+])
 
-    # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
-    freebsd* | dragonfly*)
-      _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-      ;;
+AU_DEFUN([AC_LIBTOOL_DLOPEN],
+[_LT_SET_OPTION([LT_INIT], [dlopen])
+AC_DIAGNOSE([obsolete],
+[$0: Remove this warning and the call to _LT_SET_OPTION when you
+put the `dlopen' option into LT_INIT's first parameter.])
+])
 
-    hpux9*)
-      if test "$GCC" = yes; then
-	_LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
-      else
-	_LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
-      fi
-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
-      _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LIBTOOL_DLOPEN], [])
 
-      # hardcode_minus_L: Not really in the search PATH,
-      # but as the default location of the library.
-      _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-      _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
-      ;;
 
-    hpux10*)
-      if test "$GCC" = yes -a "$with_gnu_ld" = no; then
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
-      else
-	_LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
-      fi
-      if test "$with_gnu_ld" = no; then
-	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
-	_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
+# win32-dll
+# ---------
+# Declare package support for building win32 dll's.
+LT_OPTION_DEFINE([LT_INIT], [win32-dll],
+[enable_win32_dll=yes
 
-	_LT_AC_TAGVAR(hardcode_direct, $1)=yes
-	_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+case $host in
+*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-cegcc*)
+  AC_CHECK_TOOL(AS, as, false)
+  AC_CHECK_TOOL(DLLTOOL, dlltool, false)
+  AC_CHECK_TOOL(OBJDUMP, objdump, false)
+  ;;
+esac
 
-	# hardcode_minus_L: Not really in the search PATH,
-	# but as the default location of the library.
-	_LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-      fi
-      ;;
+test -z "$AS" && AS=as
+_LT_DECL([], [AS],      [0], [Assembler program])dnl
 
-    hpux11*)
-      if test "$GCC" = yes -a "$with_gnu_ld" = no; then
-	case $host_cpu in
-	hppa*64*)
-	  _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-	  ;;
-	ia64*)
-	  _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
-	  ;;
-	*)
-	  _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
-	  ;;
-	esac
-      else
-	case $host_cpu in
-	hppa*64*)
-	  _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-	  ;;
-	ia64*)
-	  _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
-	  ;;
-	*)
-	  _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
-	  ;;
-	esac
-      fi
-      if test "$with_gnu_ld" = no; then
-	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
-	_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
+test -z "$DLLTOOL" && DLLTOOL=dlltool
+_LT_DECL([], [DLLTOOL], [0], [DLL creation program])dnl
 
-	case $host_cpu in
-	hppa*64*|ia64*)
-	  _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='+b $libdir'
-	  _LT_AC_TAGVAR(hardcode_direct, $1)=no
-	  _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-	  ;;
-	*)
-	  _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-	  _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+test -z "$OBJDUMP" && OBJDUMP=objdump
+_LT_DECL([], [OBJDUMP], [0], [Object dumper program])dnl
+])# win32-dll
 
-	  # hardcode_minus_L: Not really in the search PATH,
-	  # but as the default location of the library.
-	  _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-	  ;;
-	esac
-      fi
-      ;;
+AU_DEFUN([AC_LIBTOOL_WIN32_DLL],
+[AC_REQUIRE([AC_CANONICAL_HOST])dnl
+_LT_SET_OPTION([LT_INIT], [win32-dll])
+AC_DIAGNOSE([obsolete],
+[$0: Remove this warning and the call to _LT_SET_OPTION when you
+put the `win32-dll' option into LT_INIT's first parameter.])
+])
 
-    irix5* | irix6* | nonstopux*)
-      if test "$GCC" = yes; then
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-      else
-	_LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-	_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='-rpath $libdir'
-      fi
-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-      _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-      _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
-      ;;
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LIBTOOL_WIN32_DLL], [])
 
-    netbsd*)
-      if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-	_LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'  # a.out
-      else
-	_LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared -o $lib $libobjs $deplibs $linker_flags'      # ELF
-      fi
-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-      ;;
 
-    newsos6)
-      _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-      _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+# _LT_ENABLE_SHARED([DEFAULT])
+# ----------------------------
+# implement the --enable-shared flag, and supports the `shared' and
+# `disable-shared' LT_INIT options.
+# DEFAULT is either `yes' or `no'.  If omitted, it defaults to `yes'.
+m4_define([_LT_ENABLE_SHARED],
+[m4_define([_LT_ENABLE_SHARED_DEFAULT], [m4_if($1, no, no, yes)])dnl
+AC_ARG_ENABLE([shared],
+    [AS_HELP_STRING([--enable-shared@<:@=PKGS@:>@],
+	[build shared libraries @<:@default=]_LT_ENABLE_SHARED_DEFAULT[@:>@])],
+    [p=${PACKAGE-default}
+    case $enableval in
+    yes) enable_shared=yes ;;
+    no) enable_shared=no ;;
+    *)
+      enable_shared=no
+      # Look at the argument we got.  We use all the common list separators.
+      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+      for pkg in $enableval; do
+	IFS="$lt_save_ifs"
+	if test "X$pkg" = "X$p"; then
+	  enable_shared=yes
+	fi
+      done
+      IFS="$lt_save_ifs"
       ;;
+    esac],
+    [enable_shared=]_LT_ENABLE_SHARED_DEFAULT)
 
-    openbsd*)
-      if test -f /usr/libexec/ld.so; then
-	_LT_AC_TAGVAR(hardcode_direct, $1)=yes
-	_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-	if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-	  _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
-	  _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
-	  _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-	  _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
-	else
-	  case $host_os in
-	   openbsd[[01]].* | openbsd2.[[0-7]] | openbsd2.[[0-7]].*)
-	     _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-	     _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-	     ;;
-	   *)
-	     _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
-	     _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-	     ;;
-	  esac
-        fi
-      else
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
-      fi
-      ;;
+    _LT_DECL([build_libtool_libs], [enable_shared], [0],
+	[Whether or not to build shared libraries])
+])# _LT_ENABLE_SHARED
 
-    os2*)
-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-      _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-      _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
-      _LT_AC_TAGVAR(archive_cmds, $1)='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
-      _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
-      ;;
+LT_OPTION_DEFINE([LT_INIT], [shared], [_LT_ENABLE_SHARED([yes])])
+LT_OPTION_DEFINE([LT_INIT], [disable-shared], [_LT_ENABLE_SHARED([no])])
 
-    osf3*)
-      if test "$GCC" = yes; then
-	_LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-      else
-	_LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
-	_LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-      fi
-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-      _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-      ;;
+# Old names:
+AC_DEFUN([AC_ENABLE_SHARED],
+[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[shared])
+])
 
-    osf4* | osf5*)	# as osf3* with the addition of -msym flag
-      if test "$GCC" = yes; then
-	_LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-      else
-	_LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
-	_LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~
-	$LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~$rm $lib.exp'
+AC_DEFUN([AC_DISABLE_SHARED],
+[_LT_SET_OPTION([LT_INIT], [disable-shared])
+])
 
-	# Both c and cxx compiler support -rpath directly
-	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
-      fi
-      _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-      ;;
+AU_DEFUN([AM_ENABLE_SHARED], [AC_ENABLE_SHARED($@)])
+AU_DEFUN([AM_DISABLE_SHARED], [AC_DISABLE_SHARED($@)])
 
-    solaris*)
-      _LT_AC_TAGVAR(no_undefined_flag, $1)=' -z text'
-      if test "$GCC" = yes; then
-	wlarc='${wl}'
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-	  $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp'
-      else
-	wlarc=''
-	_LT_AC_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
-	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-  	$LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
-      fi
-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-      case $host_os in
-      solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
-      *)
-	# The compiler driver will combine and reorder linker options,
-	# but understands `-z linker_flag'.  GCC discards it without `$wl',
-	# but is careful enough not to reorder.
- 	# Supported since Solaris 2.6 (maybe 2.5.1?)
-	if test "$GCC" = yes; then
-	  _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
-	else
-	  _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract'
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AM_ENABLE_SHARED], [])
+dnl AC_DEFUN([AM_DISABLE_SHARED], [])
+
+
+
+# _LT_ENABLE_STATIC([DEFAULT])
+# ----------------------------
+# implement the --enable-static flag, and support the `static' and
+# `disable-static' LT_INIT options.
+# DEFAULT is either `yes' or `no'.  If omitted, it defaults to `yes'.
+m4_define([_LT_ENABLE_STATIC],
+[m4_define([_LT_ENABLE_STATIC_DEFAULT], [m4_if($1, no, no, yes)])dnl
+AC_ARG_ENABLE([static],
+    [AS_HELP_STRING([--enable-static@<:@=PKGS@:>@],
+	[build static libraries @<:@default=]_LT_ENABLE_STATIC_DEFAULT[@:>@])],
+    [p=${PACKAGE-default}
+    case $enableval in
+    yes) enable_static=yes ;;
+    no) enable_static=no ;;
+    *)
+     enable_static=no
+      # Look at the argument we got.  We use all the common list separators.
+      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+      for pkg in $enableval; do
+	IFS="$lt_save_ifs"
+	if test "X$pkg" = "X$p"; then
+	  enable_static=yes
 	fi
-	;;
-      esac
-      _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
-      ;;
-
-    sunos4*)
-      if test "x$host_vendor" = xsequent; then
-	# Use $CC to link under sequent, because it throws in some extra .o
-	# files that make .init and .fini sections work.
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
-      else
-	_LT_AC_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
-      fi
-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-      _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+      done
+      IFS="$lt_save_ifs"
       ;;
+    esac],
+    [enable_static=]_LT_ENABLE_STATIC_DEFAULT)
 
-    sysv4)
-      case $host_vendor in
-	sni)
-	  _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-	  _LT_AC_TAGVAR(hardcode_direct, $1)=yes # is this really true???
-	;;
-	siemens)
-	  ## LD is ld it makes a PLAMLIB
-	  ## CC just makes a GrossModule.
-	  _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -o $lib $libobjs $deplibs $linker_flags'
-	  _LT_AC_TAGVAR(reload_cmds, $1)='$CC -r -o $output$reload_objs'
-	  _LT_AC_TAGVAR(hardcode_direct, $1)=no
-        ;;
-	motorola)
-	  _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-	  _LT_AC_TAGVAR(hardcode_direct, $1)=no #Motorola manual says yes, but my tests say they lie
-	;;
-      esac
-      runpath_var='LD_RUN_PATH'
-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-      ;;
+    _LT_DECL([build_old_libs], [enable_static], [0],
+	[Whether or not to build static libraries])
+])# _LT_ENABLE_STATIC
 
-    sysv4.3*)
-      _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-      _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='-Bexport'
-      ;;
+LT_OPTION_DEFINE([LT_INIT], [static], [_LT_ENABLE_STATIC([yes])])
+LT_OPTION_DEFINE([LT_INIT], [disable-static], [_LT_ENABLE_STATIC([no])])
 
-    sysv4*MP*)
-      if test -d /usr/nec; then
-	_LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-	_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-	runpath_var=LD_RUN_PATH
-	hardcode_runpath_var=yes
-	_LT_AC_TAGVAR(ld_shlibs, $1)=yes
-      fi
-      ;;
+# Old names:
+AC_DEFUN([AC_ENABLE_STATIC],
+[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[static])
+])
 
-    sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*)
-      _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
-      _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-      runpath_var='LD_RUN_PATH'
+AC_DEFUN([AC_DISABLE_STATIC],
+[_LT_SET_OPTION([LT_INIT], [disable-static])
+])
 
-      if test "$GCC" = yes; then
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-      else
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-      fi
-      ;;
+AU_DEFUN([AM_ENABLE_STATIC], [AC_ENABLE_STATIC($@)])
+AU_DEFUN([AM_DISABLE_STATIC], [AC_DISABLE_STATIC($@)])
 
-    sysv5* | sco3.2v5* | sco5v6*)
-      # Note: We can NOT use -z defs as we might desire, because we do not
-      # link with -lc, and that would cause any symbols used from libc to
-      # always be unresolved, which means just about no library would
-      # ever link correctly.  If we're not using GNU ld we use -z text
-      # though, which does catch some bad symbols but isn't as heavy-handed
-      # as -z defs.
-      _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
-      _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs'
-      _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`'
-      _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':'
-      _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
-      _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport'
-      runpath_var='LD_RUN_PATH'
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AM_ENABLE_STATIC], [])
+dnl AC_DEFUN([AM_DISABLE_STATIC], [])
 
-      if test "$GCC" = yes; then
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
-	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
-      else
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
-	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
-      fi
-      ;;
 
-    uts4*)
-      _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-      ;;
 
+# _LT_ENABLE_FAST_INSTALL([DEFAULT])
+# ----------------------------------
+# implement the --enable-fast-install flag, and support the `fast-install'
+# and `disable-fast-install' LT_INIT options.
+# DEFAULT is either `yes' or `no'.  If omitted, it defaults to `yes'.
+m4_define([_LT_ENABLE_FAST_INSTALL],
+[m4_define([_LT_ENABLE_FAST_INSTALL_DEFAULT], [m4_if($1, no, no, yes)])dnl
+AC_ARG_ENABLE([fast-install],
+    [AS_HELP_STRING([--enable-fast-install@<:@=PKGS@:>@],
+    [optimize for fast installation @<:@default=]_LT_ENABLE_FAST_INSTALL_DEFAULT[@:>@])],
+    [p=${PACKAGE-default}
+    case $enableval in
+    yes) enable_fast_install=yes ;;
+    no) enable_fast_install=no ;;
     *)
-      _LT_AC_TAGVAR(ld_shlibs, $1)=no
+      enable_fast_install=no
+      # Look at the argument we got.  We use all the common list separators.
+      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+      for pkg in $enableval; do
+	IFS="$lt_save_ifs"
+	if test "X$pkg" = "X$p"; then
+	  enable_fast_install=yes
+	fi
+      done
+      IFS="$lt_save_ifs"
       ;;
-    esac
-  fi
+    esac],
+    [enable_fast_install=]_LT_ENABLE_FAST_INSTALL_DEFAULT)
+
+_LT_DECL([fast_install], [enable_fast_install], [0],
+	 [Whether or not to optimize for fast installation])dnl
+])# _LT_ENABLE_FAST_INSTALL
+
+LT_OPTION_DEFINE([LT_INIT], [fast-install], [_LT_ENABLE_FAST_INSTALL([yes])])
+LT_OPTION_DEFINE([LT_INIT], [disable-fast-install], [_LT_ENABLE_FAST_INSTALL([no])])
+
+# Old names:
+AU_DEFUN([AC_ENABLE_FAST_INSTALL],
+[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[fast-install])
+AC_DIAGNOSE([obsolete],
+[$0: Remove this warning and the call to _LT_SET_OPTION when you put
+the `fast-install' option into LT_INIT's first parameter.])
+])
+
+AU_DEFUN([AC_DISABLE_FAST_INSTALL],
+[_LT_SET_OPTION([LT_INIT], [disable-fast-install])
+AC_DIAGNOSE([obsolete],
+[$0: Remove this warning and the call to _LT_SET_OPTION when you put
+the `disable-fast-install' option into LT_INIT's first parameter.])
+])
+
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_ENABLE_FAST_INSTALL], [])
+dnl AC_DEFUN([AM_DISABLE_FAST_INSTALL], [])
+
+
+# _LT_WITH_PIC([MODE])
+# --------------------
+# implement the --with-pic flag, and support the `pic-only' and `no-pic'
+# LT_INIT options.
+# MODE is either `yes' or `no'.  If omitted, it defaults to `both'.
+m4_define([_LT_WITH_PIC],
+[AC_ARG_WITH([pic],
+    [AS_HELP_STRING([--with-pic],
+	[try to use only PIC/non-PIC objects @<:@default=use both@:>@])],
+    [pic_mode="$withval"],
+    [pic_mode=default])
+
+test -z "$pic_mode" && pic_mode=m4_default([$1], [default])
+
+_LT_DECL([], [pic_mode], [0], [What type of objects to build])dnl
+])# _LT_WITH_PIC
+
+LT_OPTION_DEFINE([LT_INIT], [pic-only], [_LT_WITH_PIC([yes])])
+LT_OPTION_DEFINE([LT_INIT], [no-pic], [_LT_WITH_PIC([no])])
+
+# Old name:
+AU_DEFUN([AC_LIBTOOL_PICMODE],
+[_LT_SET_OPTION([LT_INIT], [pic-only])
+AC_DIAGNOSE([obsolete],
+[$0: Remove this warning and the call to _LT_SET_OPTION when you
+put the `pic-only' option into LT_INIT's first parameter.])
 ])
-AC_MSG_RESULT([$_LT_AC_TAGVAR(ld_shlibs, $1)])
-test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no
 
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LIBTOOL_PICMODE], [])
+
+
+m4_define([_LTDL_MODE], [])
+LT_OPTION_DEFINE([LTDL_INIT], [nonrecursive],
+		 [m4_define([_LTDL_MODE], [nonrecursive])])
+LT_OPTION_DEFINE([LTDL_INIT], [recursive],
+		 [m4_define([_LTDL_MODE], [recursive])])
+LT_OPTION_DEFINE([LTDL_INIT], [subproject],
+		 [m4_define([_LTDL_MODE], [subproject])])
+
+m4_define([_LTDL_TYPE], [])
+LT_OPTION_DEFINE([LTDL_INIT], [installable],
+		 [m4_define([_LTDL_TYPE], [installable])])
+LT_OPTION_DEFINE([LTDL_INIT], [convenience],
+		 [m4_define([_LTDL_TYPE], [convenience])])
+
+# ltsugar.m4 -- libtool m4 base layer.                         -*-Autoconf-*-
 #
-# Do we need to explicitly link libc?
+# Copyright (C) 2004, 2005, 2007, 2008 Free Software Foundation, Inc.
+# Written by Gary V. Vaughan, 2004
 #
-case "x$_LT_AC_TAGVAR(archive_cmds_need_lc, $1)" in
-x|xyes)
-  # Assume -lc should be added
-  _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes
+# This file is free software; the Free Software Foundation gives
+# unlimited permission to copy and/or distribute it, with or without
+# modifications, as long as this notice is preserved.
 
-  if test "$enable_shared" = yes && test "$GCC" = yes; then
-    case $_LT_AC_TAGVAR(archive_cmds, $1) in
-    *'~'*)
-      # FIXME: we may have to deal with multi-command sequences.
-      ;;
-    '$CC '*)
-      # Test whether the compiler implicitly links with -lc since on some
-      # systems, -lgcc has to come before -lc. If gcc already passes -lc
-      # to ld, don't add -lc before -lgcc.
-      AC_MSG_CHECKING([whether -lc should be explicitly linked in])
-      $rm conftest*
-      echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+# serial 6 ltsugar.m4
 
-      if AC_TRY_EVAL(ac_compile) 2>conftest.err; then
-        soname=conftest
-        lib=conftest
-        libobjs=conftest.$ac_objext
-        deplibs=
-        wl=$_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)
-	pic_flag=$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)
-        compiler_flags=-v
-        linker_flags=-v
-        verstring=
-        output_objdir=.
-        libname=conftest
-        lt_save_allow_undefined_flag=$_LT_AC_TAGVAR(allow_undefined_flag, $1)
-        _LT_AC_TAGVAR(allow_undefined_flag, $1)=
-        if AC_TRY_EVAL(_LT_AC_TAGVAR(archive_cmds, $1) 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1)
-        then
-	  _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-        else
-	  _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes
-        fi
-        _LT_AC_TAGVAR(allow_undefined_flag, $1)=$lt_save_allow_undefined_flag
-      else
-        cat conftest.err 1>&5
-      fi
-      $rm conftest*
-      AC_MSG_RESULT([$_LT_AC_TAGVAR(archive_cmds_need_lc, $1)])
-      ;;
-    esac
-  fi
-  ;;
-esac
-])# AC_LIBTOOL_PROG_LD_SHLIBS
+# This is to help aclocal find these macros, as it can't see m4_define.
+AC_DEFUN([LTSUGAR_VERSION], [m4_if([0.1])])
 
 
-# _LT_AC_FILE_LTDLL_C
-# -------------------
-# Be careful that the start marker always follows a newline.
-AC_DEFUN([_LT_AC_FILE_LTDLL_C], [
-# /* ltdll.c starts here */
-# #define WIN32_LEAN_AND_MEAN
-# #include <windows.h>
-# #undef WIN32_LEAN_AND_MEAN
-# #include <stdio.h>
-#
-# #ifndef __CYGWIN__
-# #  ifdef __CYGWIN32__
-# #    define __CYGWIN__ __CYGWIN32__
-# #  endif
-# #endif
-#
-# #ifdef __cplusplus
-# extern "C" {
-# #endif
-# BOOL APIENTRY DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved);
-# #ifdef __cplusplus
-# }
-# #endif
-#
-# #ifdef __CYGWIN__
-# #include <cygwin/cygwin_dll.h>
-# DECLARE_CYGWIN_DLL( DllMain );
-# #endif
-# HINSTANCE __hDllInstance_base;
-#
-# BOOL APIENTRY
-# DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved)
-# {
-#   __hDllInstance_base = hInst;
-#   return TRUE;
-# }
-# /* ltdll.c ends here */
-])# _LT_AC_FILE_LTDLL_C
+# lt_join(SEP, ARG1, [ARG2...])
+# -----------------------------
+# Produce ARG1SEPARG2...SEPARGn, omitting [] arguments and their
+# associated separator.
+# Needed until we can rely on m4_join from Autoconf 2.62, since all earlier
+# versions in m4sugar had bugs.
+m4_define([lt_join],
+[m4_if([$#], [1], [],
+       [$#], [2], [[$2]],
+       [m4_if([$2], [], [], [[$2]_])$0([$1], m4_shift(m4_shift($@)))])])
+m4_define([_lt_join],
+[m4_if([$#$2], [2], [],
+       [m4_if([$2], [], [], [[$1$2]])$0([$1], m4_shift(m4_shift($@)))])])
 
 
-# _LT_AC_TAGVAR(VARNAME, [TAGNAME])
-# ---------------------------------
-AC_DEFUN([_LT_AC_TAGVAR], [ifelse([$2], [], [$1], [$1_$2])])
+# lt_car(LIST)
+# lt_cdr(LIST)
+# ------------
+# Manipulate m4 lists.
+# These macros are necessary as long as will still need to support
+# Autoconf-2.59 which quotes differently.
+m4_define([lt_car], [[$1]])
+m4_define([lt_cdr],
+[m4_if([$#], 0, [m4_fatal([$0: cannot be called without arguments])],
+       [$#], 1, [],
+       [m4_dquote(m4_shift($@))])])
+m4_define([lt_unquote], $1)
+
+
+# lt_append(MACRO-NAME, STRING, [SEPARATOR])
+# ------------------------------------------
+# Redefine MACRO-NAME to hold its former content plus `SEPARATOR'`STRING'.
+# Note that neither SEPARATOR nor STRING are expanded; they are appended
+# to MACRO-NAME as is (leaving the expansion for when MACRO-NAME is invoked).
+# No SEPARATOR is output if MACRO-NAME was previously undefined (different
+# than defined and empty).
+#
+# This macro is needed until we can rely on Autoconf 2.62, since earlier
+# versions of m4sugar mistakenly expanded SEPARATOR but not STRING.
+m4_define([lt_append],
+[m4_define([$1],
+	   m4_ifdef([$1], [m4_defn([$1])[$3]])[$2])])
 
 
-# old names
-AC_DEFUN([AM_PROG_LIBTOOL],   [AC_PROG_LIBTOOL])
-AC_DEFUN([AM_ENABLE_SHARED],  [AC_ENABLE_SHARED($@)])
-AC_DEFUN([AM_ENABLE_STATIC],  [AC_ENABLE_STATIC($@)])
-AC_DEFUN([AM_DISABLE_SHARED], [AC_DISABLE_SHARED($@)])
-AC_DEFUN([AM_DISABLE_STATIC], [AC_DISABLE_STATIC($@)])
-AC_DEFUN([AM_PROG_LD],        [AC_PROG_LD])
-AC_DEFUN([AM_PROG_NM],        [AC_PROG_NM])
 
-# This is just to silence aclocal about the macro not being used
-ifelse([AC_DISABLE_FAST_INSTALL])
+# lt_combine(SEP, PREFIX-LIST, INFIX, SUFFIX1, [SUFFIX2...])
+# ----------------------------------------------------------
+# Produce a SEP delimited list of all paired combinations of elements of
+# PREFIX-LIST with SUFFIX1 through SUFFIXn.  Each element of the list
+# has the form PREFIXmINFIXSUFFIXn.
+# Needed until we can rely on m4_combine added in Autoconf 2.62.
+m4_define([lt_combine],
+[m4_if(m4_eval([$# > 3]), [1],
+       [m4_pushdef([_Lt_sep], [m4_define([_Lt_sep], m4_defn([lt_car]))])]]dnl
+[[m4_foreach([_Lt_prefix], [$2],
+	     [m4_foreach([_Lt_suffix],
+		]m4_dquote(m4_dquote(m4_shift(m4_shift(m4_shift($@)))))[,
+	[_Lt_sep([$1])[]m4_defn([_Lt_prefix])[$3]m4_defn([_Lt_suffix])])])])])
+
+
+# lt_if_append_uniq(MACRO-NAME, VARNAME, [SEPARATOR], [UNIQ], [NOT-UNIQ])
+# -----------------------------------------------------------------------
+# Iff MACRO-NAME does not yet contain VARNAME, then append it (delimited
+# by SEPARATOR if supplied) and expand UNIQ, else NOT-UNIQ.
+m4_define([lt_if_append_uniq],
+[m4_ifdef([$1],
+	  [m4_if(m4_index([$3]m4_defn([$1])[$3], [$3$2$3]), [-1],
+		 [lt_append([$1], [$2], [$3])$4],
+		 [$5])],
+	  [lt_append([$1], [$2], [$3])$4])])
+
+
+# lt_dict_add(DICT, KEY, VALUE)
+# -----------------------------
+m4_define([lt_dict_add],
+[m4_define([$1($2)], [$3])])
 
-AC_DEFUN([LT_AC_PROG_GCJ],
-[AC_CHECK_TOOL(GCJ, gcj, no)
-  test "x${GCJFLAGS+set}" = xset || GCJFLAGS="-g -O2"
-  AC_SUBST(GCJFLAGS)
-])
 
-AC_DEFUN([LT_AC_PROG_RC],
-[AC_CHECK_TOOL(RC, windres, no)
+# lt_dict_add_subkey(DICT, KEY, SUBKEY, VALUE)
+# --------------------------------------------
+m4_define([lt_dict_add_subkey],
+[m4_define([$1($2:$3)], [$4])])
+
+
+# lt_dict_fetch(DICT, KEY, [SUBKEY])
+# ----------------------------------
+m4_define([lt_dict_fetch],
+[m4_ifval([$3],
+	m4_ifdef([$1($2:$3)], [m4_defn([$1($2:$3)])]),
+    m4_ifdef([$1($2)], [m4_defn([$1($2)])]))])
+
+
+# lt_if_dict_fetch(DICT, KEY, [SUBKEY], VALUE, IF-TRUE, [IF-FALSE])
+# -----------------------------------------------------------------
+m4_define([lt_if_dict_fetch],
+[m4_if(lt_dict_fetch([$1], [$2], [$3]), [$4],
+	[$5],
+    [$6])])
+
+
+# lt_dict_filter(DICT, [SUBKEY], VALUE, [SEPARATOR], KEY, [...])
+# --------------------------------------------------------------
+m4_define([lt_dict_filter],
+[m4_if([$5], [], [],
+  [lt_join(m4_quote(m4_default([$4], [[, ]])),
+           lt_unquote(m4_split(m4_normalize(m4_foreach(_Lt_key, lt_car([m4_shiftn(4, $@)]),
+		      [lt_if_dict_fetch([$1], _Lt_key, [$2], [$3], [_Lt_key ])])))))])[]dnl
 ])
 
+# ltversion.m4 -- version numbers			-*- Autoconf -*-
+#
+#   Copyright (C) 2004 Free Software Foundation, Inc.
+#   Written by Scott James Remnant, 2004
+#
+# This file is free software; the Free Software Foundation gives
+# unlimited permission to copy and/or distribute it, with or without
+# modifications, as long as this notice is preserved.
 
-# Cheap backport of AS_EXECUTABLE_P and required macros
-# from Autoconf 2.59; we should not use $as_executable_p directly.
+# Generated from ltversion.in.
 
-# _AS_TEST_PREPARE
-# ----------------
-m4_ifndef([_AS_TEST_PREPARE],
-[m4_defun([_AS_TEST_PREPARE],
-[if test -x / >/dev/null 2>&1; then
-  as_executable_p='test -x'
-else
-  as_executable_p='test -f'
-fi
-])])# _AS_TEST_PREPARE
+# serial 3012 ltversion.m4
+# This file is part of GNU Libtool
 
-# AS_EXECUTABLE_P
-# ---------------
-# Check whether a file is executable.
-m4_ifndef([AS_EXECUTABLE_P],
-[m4_defun([AS_EXECUTABLE_P],
-[AS_REQUIRE([_AS_TEST_PREPARE])dnl
-$as_executable_p $1[]dnl
-])])# AS_EXECUTABLE_P
+m4_define([LT_PACKAGE_VERSION], [2.2.6])
+m4_define([LT_PACKAGE_REVISION], [1.3012])
 
-# NOTE: This macro has been submitted for inclusion into   #
-#  GNU Autoconf as AC_PROG_SED.  When it is available in   #
-#  a released version of Autoconf we should remove this    #
-#  macro and use it instead.                               #
-# LT_AC_PROG_SED
-# --------------
-# Check for a fully-functional sed program, that truncates
-# as few characters as possible.  Prefer GNU sed if found.
-AC_DEFUN([LT_AC_PROG_SED],
-[AC_MSG_CHECKING([for a sed that does not truncate output])
-AC_CACHE_VAL(lt_cv_path_SED,
-[# Loop through the user's path and test for sed and gsed.
-# Then use that list of sed's as ones to test for truncation.
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for lt_ac_prog in sed gsed; do
-    for ac_exec_ext in '' $ac_executable_extensions; do
-      if AS_EXECUTABLE_P(["$as_dir/$lt_ac_prog$ac_exec_ext"]); then
-        lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext"
-      fi
-    done
-  done
-done
-IFS=$as_save_IFS
-lt_ac_max=0
-lt_ac_count=0
-# Add /usr/xpg4/bin/sed as it is typically found on Solaris
-# along with /bin/sed that truncates output.
-for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do
-  test ! -f $lt_ac_sed && continue
-  cat /dev/null > conftest.in
-  lt_ac_count=0
-  echo $ECHO_N "0123456789$ECHO_C" >conftest.in
-  # Check for GNU sed and select it if it is found.
-  if "$lt_ac_sed" --version 2>&1 < /dev/null | grep 'GNU' > /dev/null; then
-    lt_cv_path_SED=$lt_ac_sed
-    break
-  fi
-  while true; do
-    cat conftest.in conftest.in >conftest.tmp
-    mv conftest.tmp conftest.in
-    cp conftest.in conftest.nl
-    echo >>conftest.nl
-    $lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break
-    cmp -s conftest.out conftest.nl || break
-    # 10000 chars as input seems more than enough
-    test $lt_ac_count -gt 10 && break
-    lt_ac_count=`expr $lt_ac_count + 1`
-    if test $lt_ac_count -gt $lt_ac_max; then
-      lt_ac_max=$lt_ac_count
-      lt_cv_path_SED=$lt_ac_sed
-    fi
-  done
-done
-])
-SED=$lt_cv_path_SED
-AC_SUBST([SED])
-AC_MSG_RESULT([$SED])
+AC_DEFUN([LTVERSION_VERSION],
+[macro_version='2.2.6'
+macro_revision='1.3012'
+_LT_DECL(, macro_version, 0, [Which release of libtool.m4 was used?])
+_LT_DECL(, macro_revision, 0)
 ])
 
-# Copyright (C) 2002, 2003, 2005, 2006, 2007  Free Software Foundation, Inc.
+# lt~obsolete.m4 -- aclocal satisfying obsolete definitions.    -*-Autoconf-*-
+#
+#   Copyright (C) 2004, 2005, 2007 Free Software Foundation, Inc.
+#   Written by Scott James Remnant, 2004.
+#
+# This file is free software; the Free Software Foundation gives
+# unlimited permission to copy and/or distribute it, with or without
+# modifications, as long as this notice is preserved.
+
+# serial 4 lt~obsolete.m4
+
+# These exist entirely to fool aclocal when bootstrapping libtool.
+#
+# In the past libtool.m4 has provided macros via AC_DEFUN (or AU_DEFUN)
+# which have later been changed to m4_define as they aren't part of the
+# exported API, or moved to Autoconf or Automake where they belong.
+#
+# The trouble is, aclocal is a bit thick.  It'll see the old AC_DEFUN
+# in /usr/share/aclocal/libtool.m4 and remember it, then when it sees us
+# using a macro with the same name in our local m4/libtool.m4 it'll
+# pull the old libtool.m4 in (it doesn't see our shiny new m4_define
+# and doesn't know about Autoconf macros at all.)
+#
+# So we provide this file, which has a silly filename so it's always
+# included after everything else.  This provides aclocal with the
+# AC_DEFUNs it wants, but when m4 processes it, it doesn't do anything
+# because those macros already exist, or will be overwritten later.
+# We use AC_DEFUN over AU_DEFUN for compatibility with aclocal-1.6. 
+#
+# Anytime we withdraw an AC_DEFUN or AU_DEFUN, remember to add it here.
+# Yes, that means every name once taken will need to remain here until
+# we give up compatibility with versions before 1.7, at which point
+# we need to keep only those names which we still refer to.
+
+# This is to help aclocal find these macros, as it can't see m4_define.
+AC_DEFUN([LTOBSOLETE_VERSION], [m4_if([1])])
+
+m4_ifndef([AC_LIBTOOL_LINKER_OPTION],	[AC_DEFUN([AC_LIBTOOL_LINKER_OPTION])])
+m4_ifndef([AC_PROG_EGREP],		[AC_DEFUN([AC_PROG_EGREP])])
+m4_ifndef([_LT_AC_PROG_ECHO_BACKSLASH],	[AC_DEFUN([_LT_AC_PROG_ECHO_BACKSLASH])])
+m4_ifndef([_LT_AC_SHELL_INIT],		[AC_DEFUN([_LT_AC_SHELL_INIT])])
+m4_ifndef([_LT_AC_SYS_LIBPATH_AIX],	[AC_DEFUN([_LT_AC_SYS_LIBPATH_AIX])])
+m4_ifndef([_LT_PROG_LTMAIN],		[AC_DEFUN([_LT_PROG_LTMAIN])])
+m4_ifndef([_LT_AC_TAGVAR],		[AC_DEFUN([_LT_AC_TAGVAR])])
+m4_ifndef([AC_LTDL_ENABLE_INSTALL],	[AC_DEFUN([AC_LTDL_ENABLE_INSTALL])])
+m4_ifndef([AC_LTDL_PREOPEN],		[AC_DEFUN([AC_LTDL_PREOPEN])])
+m4_ifndef([_LT_AC_SYS_COMPILER],	[AC_DEFUN([_LT_AC_SYS_COMPILER])])
+m4_ifndef([_LT_AC_LOCK],		[AC_DEFUN([_LT_AC_LOCK])])
+m4_ifndef([AC_LIBTOOL_SYS_OLD_ARCHIVE],	[AC_DEFUN([AC_LIBTOOL_SYS_OLD_ARCHIVE])])
+m4_ifndef([_LT_AC_TRY_DLOPEN_SELF],	[AC_DEFUN([_LT_AC_TRY_DLOPEN_SELF])])
+m4_ifndef([AC_LIBTOOL_PROG_CC_C_O],	[AC_DEFUN([AC_LIBTOOL_PROG_CC_C_O])])
+m4_ifndef([AC_LIBTOOL_SYS_HARD_LINK_LOCKS], [AC_DEFUN([AC_LIBTOOL_SYS_HARD_LINK_LOCKS])])
+m4_ifndef([AC_LIBTOOL_OBJDIR],		[AC_DEFUN([AC_LIBTOOL_OBJDIR])])
+m4_ifndef([AC_LTDL_OBJDIR],		[AC_DEFUN([AC_LTDL_OBJDIR])])
+m4_ifndef([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH], [AC_DEFUN([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH])])
+m4_ifndef([AC_LIBTOOL_SYS_LIB_STRIP],	[AC_DEFUN([AC_LIBTOOL_SYS_LIB_STRIP])])
+m4_ifndef([AC_PATH_MAGIC],		[AC_DEFUN([AC_PATH_MAGIC])])
+m4_ifndef([AC_PROG_LD_GNU],		[AC_DEFUN([AC_PROG_LD_GNU])])
+m4_ifndef([AC_PROG_LD_RELOAD_FLAG],	[AC_DEFUN([AC_PROG_LD_RELOAD_FLAG])])
+m4_ifndef([AC_DEPLIBS_CHECK_METHOD],	[AC_DEFUN([AC_DEPLIBS_CHECK_METHOD])])
+m4_ifndef([AC_LIBTOOL_PROG_COMPILER_NO_RTTI], [AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_NO_RTTI])])
+m4_ifndef([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE], [AC_DEFUN([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE])])
+m4_ifndef([AC_LIBTOOL_PROG_COMPILER_PIC], [AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_PIC])])
+m4_ifndef([AC_LIBTOOL_PROG_LD_SHLIBS],	[AC_DEFUN([AC_LIBTOOL_PROG_LD_SHLIBS])])
+m4_ifndef([AC_LIBTOOL_POSTDEP_PREDEP],	[AC_DEFUN([AC_LIBTOOL_POSTDEP_PREDEP])])
+m4_ifndef([LT_AC_PROG_EGREP],		[AC_DEFUN([LT_AC_PROG_EGREP])])
+m4_ifndef([LT_AC_PROG_SED],		[AC_DEFUN([LT_AC_PROG_SED])])
+m4_ifndef([_LT_CC_BASENAME],		[AC_DEFUN([_LT_CC_BASENAME])])
+m4_ifndef([_LT_COMPILER_BOILERPLATE],	[AC_DEFUN([_LT_COMPILER_BOILERPLATE])])
+m4_ifndef([_LT_LINKER_BOILERPLATE],	[AC_DEFUN([_LT_LINKER_BOILERPLATE])])
+m4_ifndef([_AC_PROG_LIBTOOL],		[AC_DEFUN([_AC_PROG_LIBTOOL])])
+m4_ifndef([AC_LIBTOOL_SETUP],		[AC_DEFUN([AC_LIBTOOL_SETUP])])
+m4_ifndef([_LT_AC_CHECK_DLFCN],		[AC_DEFUN([_LT_AC_CHECK_DLFCN])])
+m4_ifndef([AC_LIBTOOL_SYS_DYNAMIC_LINKER],	[AC_DEFUN([AC_LIBTOOL_SYS_DYNAMIC_LINKER])])
+m4_ifndef([_LT_AC_TAGCONFIG],		[AC_DEFUN([_LT_AC_TAGCONFIG])])
+m4_ifndef([AC_DISABLE_FAST_INSTALL],	[AC_DEFUN([AC_DISABLE_FAST_INSTALL])])
+m4_ifndef([_LT_AC_LANG_CXX],		[AC_DEFUN([_LT_AC_LANG_CXX])])
+m4_ifndef([_LT_AC_LANG_F77],		[AC_DEFUN([_LT_AC_LANG_F77])])
+m4_ifndef([_LT_AC_LANG_GCJ],		[AC_DEFUN([_LT_AC_LANG_GCJ])])
+m4_ifndef([AC_LIBTOOL_RC],		[AC_DEFUN([AC_LIBTOOL_RC])])
+m4_ifndef([AC_LIBTOOL_LANG_C_CONFIG],	[AC_DEFUN([AC_LIBTOOL_LANG_C_CONFIG])])
+m4_ifndef([_LT_AC_LANG_C_CONFIG],	[AC_DEFUN([_LT_AC_LANG_C_CONFIG])])
+m4_ifndef([AC_LIBTOOL_LANG_CXX_CONFIG],	[AC_DEFUN([AC_LIBTOOL_LANG_CXX_CONFIG])])
+m4_ifndef([_LT_AC_LANG_CXX_CONFIG],	[AC_DEFUN([_LT_AC_LANG_CXX_CONFIG])])
+m4_ifndef([AC_LIBTOOL_LANG_F77_CONFIG],	[AC_DEFUN([AC_LIBTOOL_LANG_F77_CONFIG])])
+m4_ifndef([_LT_AC_LANG_F77_CONFIG],	[AC_DEFUN([_LT_AC_LANG_F77_CONFIG])])
+m4_ifndef([AC_LIBTOOL_LANG_GCJ_CONFIG],	[AC_DEFUN([AC_LIBTOOL_LANG_GCJ_CONFIG])])
+m4_ifndef([_LT_AC_LANG_GCJ_CONFIG],	[AC_DEFUN([_LT_AC_LANG_GCJ_CONFIG])])
+m4_ifndef([AC_LIBTOOL_LANG_RC_CONFIG],	[AC_DEFUN([AC_LIBTOOL_LANG_RC_CONFIG])])
+m4_ifndef([_LT_AC_LANG_RC_CONFIG],	[AC_DEFUN([_LT_AC_LANG_RC_CONFIG])])
+m4_ifndef([AC_LIBTOOL_CONFIG],		[AC_DEFUN([AC_LIBTOOL_CONFIG])])
+m4_ifndef([_LT_AC_FILE_LTDLL_C],	[AC_DEFUN([_LT_AC_FILE_LTDLL_C])])
+
+# Copyright (C) 2002, 2003, 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
@@ -6690,10 +7996,10 @@
 # generated from the m4 files accompanying Automake X.Y.
 # (This private macro should not be called outside this file.)
 AC_DEFUN([AM_AUTOMAKE_VERSION],
-[am__api_version='1.10'
+[am__api_version='1.11'
 dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to
 dnl require some minimum version.  Point them to the right macro.
-m4_if([$1], [1.10.1], [],
+m4_if([$1], [1.11], [],
       [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl
 ])
 
@@ -6707,12 +8013,12 @@
 # AM_SET_CURRENT_AUTOMAKE_VERSION
 # -------------------------------
 # Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced.
-# This function is AC_REQUIREd by AC_INIT_AUTOMAKE.
+# This function is AC_REQUIREd by AM_INIT_AUTOMAKE.
 AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],
-[AM_AUTOMAKE_VERSION([1.10.1])dnl
+[AM_AUTOMAKE_VERSION([1.11])dnl
 m4_ifndef([AC_AUTOCONF_VERSION],
   [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
-_AM_AUTOCONF_VERSION(AC_AUTOCONF_VERSION)])
+_AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))])
 
 # AM_AUX_DIR_EXPAND                                         -*- Autoconf -*-
 
@@ -6769,14 +8075,14 @@
 
 # AM_CONDITIONAL                                            -*- Autoconf -*-
 
-# Copyright (C) 1997, 2000, 2001, 2003, 2004, 2005, 2006
+# Copyright (C) 1997, 2000, 2001, 2003, 2004, 2005, 2006, 2008
 # Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
 
-# serial 8
+# serial 9
 
 # AM_CONDITIONAL(NAME, SHELL-CONDITION)
 # -------------------------------------
@@ -6789,6 +8095,7 @@
 AC_SUBST([$1_FALSE])dnl
 _AM_SUBST_NOTMAKE([$1_TRUE])dnl
 _AM_SUBST_NOTMAKE([$1_FALSE])dnl
+m4_define([_AM_COND_VALUE_$1], [$2])dnl
 if $2; then
   $1_TRUE=
   $1_FALSE='#'
@@ -6802,14 +8109,14 @@
 Usually this means the macro was only invoked conditionally.]])
 fi])])
 
-# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
+# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2009
 # Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
 
-# serial 9
+# serial 10
 
 # There are a few dirty hacks below to avoid letting `AC_PROG_CC' be
 # written in clear, in which case automake, when reading aclocal.m4,
@@ -6866,6 +8173,16 @@
   if test "$am_compiler_list" = ""; then
      am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp`
   fi
+  am__universal=false
+  m4_case([$1], [CC],
+    [case " $depcc " in #(
+     *\ -arch\ *\ -arch\ *) am__universal=true ;;
+     esac],
+    [CXX],
+    [case " $depcc " in #(
+     *\ -arch\ *\ -arch\ *) am__universal=true ;;
+     esac])
+
   for depmode in $am_compiler_list; do
     # Setup a source with many dependencies, because some compilers
     # like to wrap large dependency lists on column 80 (with \), and
@@ -6883,7 +8200,17 @@
     done
     echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
 
+    # We check with `-c' and `-o' for the sake of the "dashmstdout"
+    # mode.  It turns out that the SunPro C++ compiler does not properly
+    # handle `-M -o', and we need to detect this.  Also, some Intel
+    # versions had trouble with output in subdirs
+    am__obj=sub/conftest.${OBJEXT-o}
+    am__minus_obj="-o $am__obj"
     case $depmode in
+    gcc)
+      # This depmode causes a compiler race in universal mode.
+      test "$am__universal" = false || continue
+      ;;
     nosideeffect)
       # after this tag, mechanisms are not by side-effect, so they'll
       # only be used when explicitly requested
@@ -6893,19 +8220,23 @@
 	break
       fi
       ;;
+    msvisualcpp | msvcmsys)
+      # This compiler won't grok `-c -o', but also, the minuso test has
+      # not run yet.  These depmodes are late enough in the game, and
+      # so weak that their functioning should not be impacted.
+      am__obj=conftest.${OBJEXT-o}
+      am__minus_obj=
+      ;;
     none) break ;;
     esac
-    # We check with `-c' and `-o' for the sake of the "dashmstdout"
-    # mode.  It turns out that the SunPro C++ compiler does not properly
-    # handle `-M -o', and we need to detect this.
     if depmode=$depmode \
-       source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \
+       source=sub/conftest.c object=$am__obj \
        depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
-       $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \
+       $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \
          >/dev/null 2>conftest.err &&
        grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
        grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
-       grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 &&
+       grep $am__obj sub/conftest.Po > /dev/null 2>&1 &&
        ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
       # icc doesn't choke on unknown options, it will just issue warnings
       # or remarks (even with -Werror).  So we grep stderr for any message
@@ -6962,57 +8293,68 @@
 
 # Generate code to set up dependency tracking.              -*- Autoconf -*-
 
-# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005
+# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2008
 # Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
 
-#serial 3
+#serial 5
 
 # _AM_OUTPUT_DEPENDENCY_COMMANDS
 # ------------------------------
 AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS],
-[for mf in $CONFIG_FILES; do
-  # Strip MF so we end up with the name of the file.
-  mf=`echo "$mf" | sed -e 's/:.*$//'`
-  # Check whether this is an Automake generated Makefile or not.
-  # We used to match only the files named `Makefile.in', but
-  # some people rename them; so instead we look at the file content.
-  # Grep'ing the first line is not enough: some people post-process
-  # each Makefile.in and add a new line on top of each file to say so.
-  # Grep'ing the whole file is not good either: AIX grep has a line
-  # limit of 2048, but all sed's we know have understand at least 4000.
-  if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then
-    dirpart=`AS_DIRNAME("$mf")`
-  else
-    continue
-  fi
-  # Extract the definition of DEPDIR, am__include, and am__quote
-  # from the Makefile without running `make'.
-  DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
-  test -z "$DEPDIR" && continue
-  am__include=`sed -n 's/^am__include = //p' < "$mf"`
-  test -z "am__include" && continue
-  am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
-  # When using ansi2knr, U may be empty or an underscore; expand it
-  U=`sed -n 's/^U = //p' < "$mf"`
-  # Find all dependency output files, they are included files with
-  # $(DEPDIR) in their names.  We invoke sed twice because it is the
-  # simplest approach to changing $(DEPDIR) to its actual value in the
-  # expansion.
-  for file in `sed -n "
-    s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
-       sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
-    # Make sure the directory exists.
-    test -f "$dirpart/$file" && continue
-    fdir=`AS_DIRNAME(["$file"])`
-    AS_MKDIR_P([$dirpart/$fdir])
-    # echo "creating $dirpart/$file"
-    echo '# dummy' > "$dirpart/$file"
+[{
+  # Autoconf 2.62 quotes --file arguments for eval, but not when files
+  # are listed without --file.  Let's play safe and only enable the eval
+  # if we detect the quoting.
+  case $CONFIG_FILES in
+  *\'*) eval set x "$CONFIG_FILES" ;;
+  *)   set x $CONFIG_FILES ;;
+  esac
+  shift
+  for mf
+  do
+    # Strip MF so we end up with the name of the file.
+    mf=`echo "$mf" | sed -e 's/:.*$//'`
+    # Check whether this is an Automake generated Makefile or not.
+    # We used to match only the files named `Makefile.in', but
+    # some people rename them; so instead we look at the file content.
+    # Grep'ing the first line is not enough: some people post-process
+    # each Makefile.in and add a new line on top of each file to say so.
+    # Grep'ing the whole file is not good either: AIX grep has a line
+    # limit of 2048, but all sed's we know have understand at least 4000.
+    if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then
+      dirpart=`AS_DIRNAME("$mf")`
+    else
+      continue
+    fi
+    # Extract the definition of DEPDIR, am__include, and am__quote
+    # from the Makefile without running `make'.
+    DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
+    test -z "$DEPDIR" && continue
+    am__include=`sed -n 's/^am__include = //p' < "$mf"`
+    test -z "am__include" && continue
+    am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
+    # When using ansi2knr, U may be empty or an underscore; expand it
+    U=`sed -n 's/^U = //p' < "$mf"`
+    # Find all dependency output files, they are included files with
+    # $(DEPDIR) in their names.  We invoke sed twice because it is the
+    # simplest approach to changing $(DEPDIR) to its actual value in the
+    # expansion.
+    for file in `sed -n "
+      s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
+	 sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
+      # Make sure the directory exists.
+      test -f "$dirpart/$file" && continue
+      fdir=`AS_DIRNAME(["$file"])`
+      AS_MKDIR_P([$dirpart/$fdir])
+      # echo "creating $dirpart/$file"
+      echo '# dummy' > "$dirpart/$file"
+    done
   done
-done
+}
 ])# _AM_OUTPUT_DEPENDENCY_COMMANDS
 
 
@@ -7032,13 +8374,13 @@
 # Do all the work for Automake.                             -*- Autoconf -*-
 
 # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
-# 2005, 2006, 2008 Free Software Foundation, Inc.
+# 2005, 2006, 2008, 2009 Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
 
-# serial 13
+# serial 16
 
 # This macro actually does too much.  Some checks are only needed if
 # your package does certain things.  But this isn't really a big deal.
@@ -7055,7 +8397,7 @@
 # arguments mandatory, and then we can depend on a new Autoconf
 # release and drop the old call support.
 AC_DEFUN([AM_INIT_AUTOMAKE],
-[AC_PREREQ([2.60])dnl
+[AC_PREREQ([2.62])dnl
 dnl Autoconf wants to disallow AM_ names.  We explicitly allow
 dnl the ones we care about.
 m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl
@@ -7106,8 +8448,8 @@
 AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version})
 AM_MISSING_PROG(AUTOHEADER, autoheader)
 AM_MISSING_PROG(MAKEINFO, makeinfo)
-AM_PROG_INSTALL_SH
-AM_PROG_INSTALL_STRIP
+AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
+AC_REQUIRE([AM_PROG_INSTALL_STRIP])dnl
 AC_REQUIRE([AM_PROG_MKDIR_P])dnl
 # We need awk for the "check" target.  The system "awk" is bad on
 # some platforms.
@@ -7115,24 +8457,37 @@
 AC_REQUIRE([AC_PROG_MAKE_SET])dnl
 AC_REQUIRE([AM_SET_LEADING_DOT])dnl
 _AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])],
-              [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])],
-	      		     [_AM_PROG_TAR([v7])])])
+	      [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])],
+			     [_AM_PROG_TAR([v7])])])
 _AM_IF_OPTION([no-dependencies],,
 [AC_PROVIDE_IFELSE([AC_PROG_CC],
-                  [_AM_DEPENDENCIES(CC)],
-                  [define([AC_PROG_CC],
-                          defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl
+		  [_AM_DEPENDENCIES(CC)],
+		  [define([AC_PROG_CC],
+			  defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl
 AC_PROVIDE_IFELSE([AC_PROG_CXX],
-                  [_AM_DEPENDENCIES(CXX)],
-                  [define([AC_PROG_CXX],
-                          defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl
+		  [_AM_DEPENDENCIES(CXX)],
+		  [define([AC_PROG_CXX],
+			  defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl
 AC_PROVIDE_IFELSE([AC_PROG_OBJC],
-                  [_AM_DEPENDENCIES(OBJC)],
-                  [define([AC_PROG_OBJC],
-                          defn([AC_PROG_OBJC])[_AM_DEPENDENCIES(OBJC)])])dnl
+		  [_AM_DEPENDENCIES(OBJC)],
+		  [define([AC_PROG_OBJC],
+			  defn([AC_PROG_OBJC])[_AM_DEPENDENCIES(OBJC)])])dnl
 ])
+_AM_IF_OPTION([silent-rules], [AC_REQUIRE([AM_SILENT_RULES])])dnl
+dnl The `parallel-tests' driver may need to know about EXEEXT, so add the
+dnl `am__EXEEXT' conditional if _AM_COMPILER_EXEEXT was seen.  This macro
+dnl is hooked onto _AC_COMPILER_EXEEXT early, see below.
+AC_CONFIG_COMMANDS_PRE(dnl
+[m4_provide_if([_AM_COMPILER_EXEEXT],
+  [AM_CONDITIONAL([am__EXEEXT], [test -n "$EXEEXT"])])])dnl
 ])
 
+dnl Hook into `_AC_COMPILER_EXEEXT' early to learn its expansion.  Do not
+dnl add the conditional right here, as _AC_COMPILER_EXEEXT may be further
+dnl mangled by Autoconf and run in a shell conditional statement.
+m4_define([_AC_COMPILER_EXEEXT],
+m4_defn([_AC_COMPILER_EXEEXT])[m4_provide([_AM_COMPILER_EXEEXT])])
+
 
 # When config.status generates a header, we must update the stamp-h file.
 # This file resides in the same directory as the config header
@@ -7155,7 +8510,7 @@
 done
 echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count])
 
-# Copyright (C) 2001, 2003, 2005  Free Software Foundation, Inc.
+# Copyright (C) 2001, 2003, 2005, 2008  Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
@@ -7166,7 +8521,14 @@
 # Define $install_sh.
 AC_DEFUN([AM_PROG_INSTALL_SH],
 [AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
-install_sh=${install_sh-"\$(SHELL) $am_aux_dir/install-sh"}
+if test x"${install_sh}" != xset; then
+  case $am_aux_dir in
+  *\ * | *\	*)
+    install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;;
+  *)
+    install_sh="\${SHELL} $am_aux_dir/install-sh"
+  esac
+fi
 AC_SUBST(install_sh)])
 
 # Copyright (C) 2003, 2005  Free Software Foundation, Inc.
@@ -7192,13 +8554,13 @@
 
 # Check to see how 'make' treats includes.	            -*- Autoconf -*-
 
-# Copyright (C) 2001, 2002, 2003, 2005  Free Software Foundation, Inc.
+# Copyright (C) 2001, 2002, 2003, 2005, 2009  Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
 
-# serial 3
+# serial 4
 
 # AM_MAKE_INCLUDE()
 # -----------------
@@ -7207,7 +8569,7 @@
 [am_make=${MAKE-make}
 cat > confinc << 'END'
 am__doit:
-	@echo done
+	@echo this is the am__doit target
 .PHONY: am__doit
 END
 # If we don't find an include directive, just comment out the code.
@@ -7217,24 +8579,24 @@
 _am_result=none
 # First try GNU make style include.
 echo "include confinc" > confmf
-# We grep out `Entering directory' and `Leaving directory'
-# messages which can occur if `w' ends up in MAKEFLAGS.
-# In particular we don't look at `^make:' because GNU make might
-# be invoked under some other name (usually "gmake"), in which
-# case it prints its new name instead of `make'.
-if test "`$am_make -s -f confmf 2> /dev/null | grep -v 'ing directory'`" = "done"; then
-   am__include=include
-   am__quote=
-   _am_result=GNU
-fi
+# Ignore all kinds of additional output from `make'.
+case `$am_make -s -f confmf 2> /dev/null` in #(
+*the\ am__doit\ target*)
+  am__include=include
+  am__quote=
+  _am_result=GNU
+  ;;
+esac
 # Now try BSD make style include.
 if test "$am__include" = "#"; then
    echo '.include "confinc"' > confmf
-   if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then
-      am__include=.include
-      am__quote="\""
-      _am_result=BSD
-   fi
+   case `$am_make -s -f confmf 2> /dev/null` in #(
+   *the\ am__doit\ target*)
+     am__include=.include
+     am__quote="\""
+     _am_result=BSD
+     ;;
+   esac
 fi
 AC_SUBST([am__include])
 AC_SUBST([am__quote])
@@ -7242,14 +8604,14 @@
 rm -f confinc confmf
 ])
 
-# Copyright (C) 1999, 2000, 2001, 2003, 2004, 2005
+# Copyright (C) 1999, 2000, 2001, 2003, 2004, 2005, 2008
 # Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
 
-# serial 5
+# serial 6
 
 # AM_PROG_CC_C_O
 # --------------
@@ -7261,8 +8623,9 @@
 # FIXME: we rely on the cache variable name because
 # there is no other way.
 set dummy $CC
-ac_cc=`echo $[2] | sed ['s/[^a-zA-Z0-9_]/_/g;s/^[0-9]/_/']`
-if eval "test \"`echo '$ac_cv_prog_cc_'${ac_cc}_c_o`\" != yes"; then
+am_cc=`echo $[2] | sed ['s/[^a-zA-Z0-9_]/_/g;s/^[0-9]/_/']`
+eval am_t=\$ac_cv_prog_cc_${am_cc}_c_o
+if test "$am_t" != yes; then
    # Losing compiler, so override with the script.
    # FIXME: It is wrong to rewrite CC.
    # But if we don't then we get into trouble of one sort or another.
@@ -7278,14 +8641,14 @@
 
 # Fake the existence of programs that GNU maintainers use.  -*- Autoconf -*-
 
-# Copyright (C) 1997, 1999, 2000, 2001, 2003, 2004, 2005
+# Copyright (C) 1997, 1999, 2000, 2001, 2003, 2004, 2005, 2008
 # Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
 
-# serial 5
+# serial 6
 
 # AM_MISSING_PROG(NAME, PROGRAM)
 # ------------------------------
@@ -7302,7 +8665,14 @@
 AC_DEFUN([AM_MISSING_HAS_RUN],
 [AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
 AC_REQUIRE_AUX_FILE([missing])dnl
-test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing"
+if test x"${MISSING+set}" != xset; then
+  case $am_aux_dir in
+  *\ * | *\	*)
+    MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;;
+  *)
+    MISSING="\${SHELL} $am_aux_dir/missing" ;;
+  esac
+fi
 # Use eval to expand $SHELL
 if eval "$MISSING --run true"; then
   am_missing_run="$MISSING --run "
@@ -7340,13 +8710,13 @@
 
 # Helper functions for option handling.                     -*- Autoconf -*-
 
-# Copyright (C) 2001, 2002, 2003, 2005  Free Software Foundation, Inc.
+# Copyright (C) 2001, 2002, 2003, 2005, 2008  Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
 
-# serial 3
+# serial 4
 
 # _AM_MANGLE_OPTION(NAME)
 # -----------------------
@@ -7363,7 +8733,7 @@
 # ----------------------------------
 # OPTIONS is a space-separated list of Automake options.
 AC_DEFUN([_AM_SET_OPTIONS],
-[AC_FOREACH([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])])
+[m4_foreach_w([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])])
 
 # _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET])
 # -------------------------------------------
@@ -7373,14 +8743,14 @@
 
 # Check to make sure that the build environment is sane.    -*- Autoconf -*-
 
-# Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005
+# Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005, 2008
 # Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
 
-# serial 4
+# serial 5
 
 # AM_SANITY_CHECK
 # ---------------
@@ -7389,16 +8759,29 @@
 # Just in case
 sleep 1
 echo timestamp > conftest.file
+# Reject unsafe characters in $srcdir or the absolute working directory
+# name.  Accept space and tab only in the latter.
+am_lf='
+'
+case `pwd` in
+  *[[\\\"\#\$\&\'\`$am_lf]]*)
+    AC_MSG_ERROR([unsafe absolute working directory name]);;
+esac
+case $srcdir in
+  *[[\\\"\#\$\&\'\`$am_lf\ \	]]*)
+    AC_MSG_ERROR([unsafe srcdir value: `$srcdir']);;
+esac
+
 # Do `set' in a subshell so we don't clobber the current shell's
 # arguments.  Must try -L first in case configure is actually a
 # symlink; some systems play weird games with the mod time of symlinks
 # (eg FreeBSD returns the mod time of the symlink's containing
 # directory).
 if (
-   set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null`
+   set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`
    if test "$[*]" = "X"; then
       # -L didn't work.
-      set X `ls -t $srcdir/configure conftest.file`
+      set X `ls -t "$srcdir/configure" conftest.file`
    fi
    rm -f conftest.file
    if test "$[*]" != "X $srcdir/configure conftest.file" \
@@ -7451,18 +8834,25 @@
 INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
 AC_SUBST([INSTALL_STRIP_PROGRAM])])
 
-# Copyright (C) 2006  Free Software Foundation, Inc.
+# Copyright (C) 2006, 2008  Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
 
+# serial 2
+
 # _AM_SUBST_NOTMAKE(VARIABLE)
 # ---------------------------
 # Prevent Automake from outputting VARIABLE = @VARIABLE@ in Makefile.in.
 # This macro is traced by Automake.
 AC_DEFUN([_AM_SUBST_NOTMAKE])
 
+# AM_SUBST_NOTMAKE(VARIABLE)
+# ---------------------------
+# Public sister of _AM_SUBST_NOTMAKE.
+AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)])
+
 # Check how to create a tarball.                            -*- Autoconf -*-
 
 # Copyright (C) 2004, 2005  Free Software Foundation, Inc.
--- ode-0.11.orig/ltmain.sh
+++ ode-0.11/ltmain.sh
@@ -1,55 +1,83 @@
-# ltmain.sh - Provide generalized library-building support services.
-# NOTE: Changing this file will not affect anything until you rerun configure.
-#
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, 2006,
-# 2007, 2008  Free Software Foundation, Inc.
-# Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
-#
-# This program is free software; you can redistribute it and/or modify
+# Generated from ltmain.m4sh.
+
+# ltmain.sh (GNU libtool) 2.2.6
+# Written by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
+
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, 2006, 2007 2008 Free Software Foundation, Inc.
+# This is free software; see the source for copying conditions.  There is NO
+# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+
+# GNU Libtool is free software; you can redistribute it and/or modify
 # it under the terms of the GNU General Public License as published by
 # the Free Software Foundation; either version 2 of the License, or
 # (at your option) any later version.
 #
-# This program is distributed in the hope that it will be useful, but
+# As a special exception to the GNU General Public License,
+# if you distribute this file as part of a program or library that
+# is built using GNU Libtool, you may include this file under the
+# same distribution terms that you use for the rest of that program.
+#
+# GNU Libtool is distributed in the hope that it will be useful, but
 # WITHOUT ANY WARRANTY; without even the implied warranty of
 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
 # General Public License for more details.
 #
 # You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
-#
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-basename="s,^.*/,,g"
-
-# Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh
-# is ksh but when the shell is invoked as "sh" and the current value of
-# the _XPG environment variable is not equal to 1 (one), the special
-# positional parameter $0, within a function call, is the name of the
-# function.
-progpath="$0"
-
-# define SED for historic ltconfig's generated by Libtool 1.3
-test -z "$SED" && SED=sed
+# along with GNU Libtool; see the file COPYING.  If not, a copy
+# can be downloaded from http://www.gnu.org/licenses/gpl.html,
+# or obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
 
-# The name of this program:
-progname=`echo "$progpath" | $SED $basename`
-modename="$progname"
-
-# Global variables:
-EXIT_SUCCESS=0
-EXIT_FAILURE=1
+# Usage: $progname [OPTION]... [MODE-ARG]...
+#
+# Provide generalized library-building support services.
+#
+#     --config             show all configuration variables
+#     --debug              enable verbose shell tracing
+# -n, --dry-run            display commands without modifying any files
+#     --features           display basic configuration information and exit
+#     --mode=MODE          use operation mode MODE
+#     --preserve-dup-deps  don't remove duplicate dependency libraries
+#     --quiet, --silent    don't print informational messages
+#     --tag=TAG            use configuration variables from tag TAG
+# -v, --verbose            print informational messages (default)
+#     --version            print version information
+# -h, --help               print short or long help message
+#
+# MODE must be one of the following:
+#
+#       clean              remove files from the build directory
+#       compile            compile a source file into a libtool object
+#       execute            automatically set library path, then run a program
+#       finish             complete the installation of libtool libraries
+#       install            install libraries or executables
+#       link               create a library or an executable
+#       uninstall          remove libraries from an installed directory
+#
+# MODE-ARGS vary depending on the MODE.
+# Try `$progname --help --mode=MODE' for a more detailed description of MODE.
+#
+# When reporting a bug, please describe a test case to reproduce it and
+# include the following information:
+#
+#       host-triplet:	$host
+#       shell:		$SHELL
+#       compiler:		$LTCC
+#       compiler flags:		$LTCFLAGS
+#       linker:		$LD (gnu? $with_gnu_ld)
+#       $progname:		(GNU libtool) 2.2.6 Debian-2.2.6a-4
+#       automake:		$automake_version
+#       autoconf:		$autoconf_version
+#
+# Report bugs to <bug-libtool@gnu.org>.
 
 PROGRAM=ltmain.sh
 PACKAGE=libtool
-VERSION=1.5.26
-TIMESTAMP=" (1.1220.2.493 2008/02/01 16:58:18)"
+VERSION="2.2.6 Debian-2.2.6a-4"
+TIMESTAMP=""
+package_revision=1.3012
 
-# Be Bourne compatible (taken from Autoconf:_AS_BOURNE_COMPATIBLE).
+# Be Bourne compatible
 if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
   emulate sh
   NULLCMD=:
@@ -63,104 +91,261 @@
 BIN_SH=xpg4; export BIN_SH # for Tru64
 DUALCASE=1; export DUALCASE # for MKS sh
 
-# Check that we have a working $echo.
-if test "X$1" = X--no-reexec; then
-  # Discard the --no-reexec flag, and continue.
-  shift
-elif test "X$1" = X--fallback-echo; then
-  # Avoid inline document here, it may be left over
-  :
-elif test "X`($echo '\t') 2>/dev/null`" = 'X\t'; then
-  # Yippee, $echo works!
-  :
-else
-  # Restart under the correct shell, and then maybe $echo will work.
-  exec $SHELL "$progpath" --no-reexec ${1+"$@"}
-fi
-
-if test "X$1" = X--fallback-echo; then
-  # used as fallback echo
-  shift
-  cat <<EOF
-$*
-EOF
-  exit $EXIT_SUCCESS
-fi
-
-default_mode=
-help="Try \`$progname --help' for more information."
-magic="%%%MAGIC variable%%%"
-mkdir="mkdir"
-mv="mv -f"
-rm="rm -f"
-
-# Sed substitution that helps us do robust quoting.  It backslashifies
-# metacharacters that are still active within double-quoted strings.
-Xsed="${SED}"' -e 1s/^X//'
-sed_quote_subst='s/\([\\`\\"$\\\\]\)/\\\1/g'
-# test EBCDIC or ASCII
-case `echo X|tr X '\101'` in
- A) # ASCII based system
-    # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr
-  SP2NL='tr \040 \012'
-  NL2SP='tr \015\012 \040\040'
-  ;;
- *) # EBCDIC based system
-  SP2NL='tr \100 \n'
-  NL2SP='tr \r\n \100\100'
-  ;;
-esac
-
-# NLS nuisances.
+# NLS nuisances: We save the old values to restore during execute mode.
 # Only set LANG and LC_ALL to C if already set.
 # These must not be set unconditionally because not all systems understand
 # e.g. LANG=C (notably SCO).
-# We save the old values to restore during execute mode.
-lt_env=
+lt_user_locale=
+lt_safe_locale=
 for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
 do
   eval "if test \"\${$lt_var+set}\" = set; then
-	  save_$lt_var=\$$lt_var
-	  lt_env=\"$lt_var=\$$lt_var \$lt_env\"
-	  $lt_var=C
+          save_$lt_var=\$$lt_var
+          $lt_var=C
 	  export $lt_var
+	  lt_user_locale=\"$lt_var=\\\$save_\$lt_var; \$lt_user_locale\"
+	  lt_safe_locale=\"$lt_var=C; \$lt_safe_locale\"
 	fi"
 done
 
-if test -n "$lt_env"; then
-  lt_env="env $lt_env"
-fi
+$lt_unset CDPATH
+
+
+
+
+
+: ${CP="cp -f"}
+: ${ECHO="echo"}
+: ${EGREP="/bin/grep -E"}
+: ${FGREP="/bin/grep -F"}
+: ${GREP="/bin/grep"}
+: ${LN_S="ln -s"}
+: ${MAKE="make"}
+: ${MKDIR="mkdir"}
+: ${MV="mv -f"}
+: ${RM="rm -f"}
+: ${SED="/bin/sed"}
+: ${SHELL="${CONFIG_SHELL-/bin/sh}"}
+: ${Xsed="$SED -e 1s/^X//"}
+
+# Global variables:
+EXIT_SUCCESS=0
+EXIT_FAILURE=1
+EXIT_MISMATCH=63  # $? = 63 is used to indicate version mismatch to missing.
+EXIT_SKIP=77	  # $? = 77 is used to indicate a skipped test to automake.
+
+exit_status=$EXIT_SUCCESS
 
 # Make sure IFS has a sensible default
 lt_nl='
 '
 IFS=" 	$lt_nl"
 
-if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then
-  $echo "$modename: not configured to build any kind of library" 1>&2
-  $echo "Fatal configuration error.  See the $PACKAGE docs for more information." 1>&2
-  exit $EXIT_FAILURE
-fi
+dirname="s,/[^/]*$,,"
+basename="s,^.*/,,"
 
-# Global variables.
-mode=$default_mode
-nonopt=
-prev=
-prevopt=
-run=
-show="$echo"
-show_help=
-execute_dlfiles=
-duplicate_deps=no
-preserve_args=
-lo2o="s/\\.lo\$/.${objext}/"
-o2lo="s/\\.${objext}\$/.lo/"
-extracted_archives=
-extracted_serial=0
+# func_dirname_and_basename file append nondir_replacement
+# perform func_basename and func_dirname in a single function
+# call:
+#   dirname:  Compute the dirname of FILE.  If nonempty,
+#             add APPEND to the result, otherwise set result
+#             to NONDIR_REPLACEMENT.
+#             value returned in "$func_dirname_result"
+#   basename: Compute filename of FILE.
+#             value retuned in "$func_basename_result"
+# Implementation must be kept synchronized with func_dirname
+# and func_basename. For efficiency, we do not delegate to
+# those functions but instead duplicate the functionality here.
+func_dirname_and_basename ()
+{
+  # Extract subdirectory from the argument.
+  func_dirname_result=`$ECHO "X${1}" | $Xsed -e "$dirname"`
+  if test "X$func_dirname_result" = "X${1}"; then
+    func_dirname_result="${3}"
+  else
+    func_dirname_result="$func_dirname_result${2}"
+  fi
+  func_basename_result=`$ECHO "X${1}" | $Xsed -e "$basename"`
+}
+
+# Generated shell functions inserted here.
+
+# Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh
+# is ksh but when the shell is invoked as "sh" and the current value of
+# the _XPG environment variable is not equal to 1 (one), the special
+# positional parameter $0, within a function call, is the name of the
+# function.
+progpath="$0"
+
+# The name of this program:
+# In the unlikely event $progname began with a '-', it would play havoc with
+# func_echo (imagine progname=-n), so we prepend ./ in that case:
+func_dirname_and_basename "$progpath"
+progname=$func_basename_result
+case $progname in
+  -*) progname=./$progname ;;
+esac
+
+# Make sure we have an absolute path for reexecution:
+case $progpath in
+  [\\/]*|[A-Za-z]:\\*) ;;
+  *[\\/]*)
+     progdir=$func_dirname_result
+     progdir=`cd "$progdir" && pwd`
+     progpath="$progdir/$progname"
+     ;;
+  *)
+     save_IFS="$IFS"
+     IFS=:
+     for progdir in $PATH; do
+       IFS="$save_IFS"
+       test -x "$progdir/$progname" && break
+     done
+     IFS="$save_IFS"
+     test -n "$progdir" || progdir=`pwd`
+     progpath="$progdir/$progname"
+     ;;
+esac
+
+# Sed substitution that helps us do robust quoting.  It backslashifies
+# metacharacters that are still active within double-quoted strings.
+Xsed="${SED}"' -e 1s/^X//'
+sed_quote_subst='s/\([`"$\\]\)/\\\1/g'
+
+# Same as above, but do not quote variable references.
+double_quote_subst='s/\(["`\\]\)/\\\1/g'
+
+# Re-`\' parameter expansions in output of double_quote_subst that were
+# `\'-ed in input to the same.  If an odd number of `\' preceded a '$'
+# in input to double_quote_subst, that '$' was protected from expansion.
+# Since each input `\' is now two `\'s, look for any number of runs of
+# four `\'s followed by two `\'s and then a '$'.  `\' that '$'.
+bs='\\'
+bs2='\\\\'
+bs4='\\\\\\\\'
+dollar='\$'
+sed_double_backslash="\
+  s/$bs4/&\\
+/g
+  s/^$bs2$dollar/$bs&/
+  s/\\([^$bs]\\)$bs2$dollar/\\1$bs2$bs$dollar/g
+  s/\n//g"
+
+# Standard options:
+opt_dry_run=false
+opt_help=false
+opt_quiet=false
+opt_verbose=false
+opt_warning=:
+
+# func_echo arg...
+# Echo program name prefixed message, along with the current mode
+# name if it has been set yet.
+func_echo ()
+{
+    $ECHO "$progname${mode+: }$mode: $*"
+}
+
+# func_verbose arg...
+# Echo program name prefixed message in verbose mode only.
+func_verbose ()
+{
+    $opt_verbose && func_echo ${1+"$@"}
+
+    # A bug in bash halts the script if the last line of a function
+    # fails when set -e is in force, so we need another command to
+    # work around that:
+    :
+}
+
+# func_error arg...
+# Echo program name prefixed message to standard error.
+func_error ()
+{
+    $ECHO "$progname${mode+: }$mode: "${1+"$@"} 1>&2
+}
+
+# func_warning arg...
+# Echo program name prefixed warning message to standard error.
+func_warning ()
+{
+    $opt_warning && $ECHO "$progname${mode+: }$mode: warning: "${1+"$@"} 1>&2
+
+    # bash bug again:
+    :
+}
+
+# func_fatal_error arg...
+# Echo program name prefixed message to standard error, and exit.
+func_fatal_error ()
+{
+    func_error ${1+"$@"}
+    exit $EXIT_FAILURE
+}
+
+# func_fatal_help arg...
+# Echo program name prefixed message to standard error, followed by
+# a help hint, and exit.
+func_fatal_help ()
+{
+    func_error ${1+"$@"}
+    func_fatal_error "$help"
+}
+help="Try \`$progname --help' for more information."  ## default
+
+
+# func_grep expression filename
+# Check whether EXPRESSION matches any line of FILENAME, without output.
+func_grep ()
+{
+    $GREP "$1" "$2" >/dev/null 2>&1
+}
+
+
+# func_mkdir_p directory-path
+# Make sure the entire path to DIRECTORY-PATH is available.
+func_mkdir_p ()
+{
+    my_directory_path="$1"
+    my_dir_list=
+
+    if test -n "$my_directory_path" && test "$opt_dry_run" != ":"; then
+
+      # Protect directory names starting with `-'
+      case $my_directory_path in
+        -*) my_directory_path="./$my_directory_path" ;;
+      esac
+
+      # While some portion of DIR does not yet exist...
+      while test ! -d "$my_directory_path"; do
+        # ...make a list in topmost first order.  Use a colon delimited
+	# list incase some portion of path contains whitespace.
+        my_dir_list="$my_directory_path:$my_dir_list"
+
+        # If the last portion added has no slash in it, the list is done
+        case $my_directory_path in */*) ;; *) break ;; esac
+
+        # ...otherwise throw away the child directory and loop
+        my_directory_path=`$ECHO "X$my_directory_path" | $Xsed -e "$dirname"`
+      done
+      my_dir_list=`$ECHO "X$my_dir_list" | $Xsed -e 's,:*$,,'`
+
+      save_mkdir_p_IFS="$IFS"; IFS=':'
+      for my_dir in $my_dir_list; do
+	IFS="$save_mkdir_p_IFS"
+        # mkdir can fail with a `File exist' error if two processes
+        # try to create one of the directories concurrently.  Don't
+        # stop in that case!
+        $MKDIR "$my_dir" 2>/dev/null || :
+      done
+      IFS="$save_mkdir_p_IFS"
+
+      # Bail out if we (or some other process) failed to create a directory.
+      test -d "$my_directory_path" || \
+        func_fatal_error "Failed to create \`$1'"
+    fi
+}
 
-#####################################
-# Shell function definitions:
-# This seems to be the best place for them
 
 # func_mktempdir [string]
 # Make a temporary directory that won't clash with other running
@@ -170,7 +355,7 @@
 {
     my_template="${TMPDIR-/tmp}/${1-$progname}"
 
-    if test "$run" = ":"; then
+    if test "$opt_dry_run" = ":"; then
       # Return a directory name, but don't create it in dry-run mode
       my_tmpdir="${my_template}-$$"
     else
@@ -179,525 +364,786 @@
       my_tmpdir=`mktemp -d "${my_template}-XXXXXXXX" 2>/dev/null`
 
       if test ! -d "$my_tmpdir"; then
-	# Failing that, at least try and use $RANDOM to avoid a race
-	my_tmpdir="${my_template}-${RANDOM-0}$$"
+        # Failing that, at least try and use $RANDOM to avoid a race
+        my_tmpdir="${my_template}-${RANDOM-0}$$"
 
-	save_mktempdir_umask=`umask`
-	umask 0077
-	$mkdir "$my_tmpdir"
-	umask $save_mktempdir_umask
+        save_mktempdir_umask=`umask`
+        umask 0077
+        $MKDIR "$my_tmpdir"
+        umask $save_mktempdir_umask
       fi
 
       # If we're not in dry-run mode, bomb out on failure
-      test -d "$my_tmpdir" || {
-        $echo "cannot create temporary directory \`$my_tmpdir'" 1>&2
-	exit $EXIT_FAILURE
-      }
+      test -d "$my_tmpdir" || \
+        func_fatal_error "cannot create temporary directory \`$my_tmpdir'"
     fi
 
-    $echo "X$my_tmpdir" | $Xsed
+    $ECHO "X$my_tmpdir" | $Xsed
 }
 
 
-# func_win32_libid arg
-# return the library type of file 'arg'
-#
-# Need a lot of goo to handle *both* DLLs and import libs
-# Has to be a shell function in order to 'eat' the argument
-# that is supplied when $file_magic_command is called.
-func_win32_libid ()
+# func_quote_for_eval arg
+# Aesthetically quote ARG to be evaled later.
+# This function returns two values: FUNC_QUOTE_FOR_EVAL_RESULT
+# is double-quoted, suitable for a subsequent eval, whereas
+# FUNC_QUOTE_FOR_EVAL_UNQUOTED_RESULT has merely all characters
+# which are still active within double quotes backslashified.
+func_quote_for_eval ()
 {
-  win32_libid_type="unknown"
-  win32_fileres=`file -L $1 2>/dev/null`
-  case $win32_fileres in
-  *ar\ archive\ import\ library*) # definitely import
-    win32_libid_type="x86 archive import"
-    ;;
-  *ar\ archive*) # could be an import, or static
-    if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null | \
-      $EGREP -e 'file format pe-i386(.*architecture: i386)?' >/dev/null ; then
-      win32_nmres=`eval $NM -f posix -A $1 | \
-	$SED -n -e '1,100{
-		/ I /{
-			s,.*,import,
-			p
-			q
-			}
-		}'`
-      case $win32_nmres in
-      import*)  win32_libid_type="x86 archive import";;
-      *)        win32_libid_type="x86 archive static";;
-      esac
-    fi
-    ;;
-  *DLL*)
-    win32_libid_type="x86 DLL"
-    ;;
-  *executable*) # but shell scripts are "executable" too...
-    case $win32_fileres in
-    *MS\ Windows\ PE\ Intel*)
-      win32_libid_type="x86 DLL"
-      ;;
+    case $1 in
+      *[\\\`\"\$]*)
+	func_quote_for_eval_unquoted_result=`$ECHO "X$1" | $Xsed -e "$sed_quote_subst"` ;;
+      *)
+        func_quote_for_eval_unquoted_result="$1" ;;
+    esac
+
+    case $func_quote_for_eval_unquoted_result in
+      # Double-quote args containing shell metacharacters to delay
+      # word splitting, command substitution and and variable
+      # expansion for a subsequent eval.
+      # Many Bourne shells cannot handle close brackets correctly
+      # in scan sets, so we specify it separately.
+      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
+        func_quote_for_eval_result="\"$func_quote_for_eval_unquoted_result\""
+        ;;
+      *)
+        func_quote_for_eval_result="$func_quote_for_eval_unquoted_result"
     esac
-    ;;
-  esac
-  $echo $win32_libid_type
 }
 
 
-# func_infer_tag arg
-# Infer tagged configuration to use if any are available and
-# if one wasn't chosen via the "--tag" command line option.
-# Only attempt this if the compiler in the base compile
-# command doesn't match the default compiler.
-# arg is usually of the form 'gcc ...'
-func_infer_tag ()
+# func_quote_for_expand arg
+# Aesthetically quote ARG to be evaled later; same as above,
+# but do not quote variable references.
+func_quote_for_expand ()
 {
-    if test -n "$available_tags" && test -z "$tagname"; then
-      CC_quoted=
-      for arg in $CC; do
-	case $arg in
-	  *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
-	  arg="\"$arg\""
-	  ;;
-	esac
-	CC_quoted="$CC_quoted $arg"
-      done
-      case $@ in
-      # Blanks in the command may have been stripped by the calling shell,
-      # but not from the CC environment variable when configure was run.
-      " $CC "* | "$CC "* | " `$echo $CC` "* | "`$echo $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$echo $CC_quoted` "* | "`$echo $CC_quoted` "*) ;;
-      # Blanks at the start of $base_compile will cause this to fail
-      # if we don't check for them as well.
+    case $1 in
+      *[\\\`\"]*)
+	my_arg=`$ECHO "X$1" | $Xsed \
+	    -e "$double_quote_subst" -e "$sed_double_backslash"` ;;
       *)
-	for z in $available_tags; do
-	  if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$progpath" > /dev/null; then
-	    # Evaluate the configuration.
-	    eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $progpath`"
-	    CC_quoted=
-	    for arg in $CC; do
-	    # Double-quote args containing other shell metacharacters.
-	    case $arg in
-	      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
-	      arg="\"$arg\""
-	      ;;
-	    esac
-	    CC_quoted="$CC_quoted $arg"
-	  done
-	    case "$@ " in
-	      " $CC "* | "$CC "* | " `$echo $CC` "* | "`$echo $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$echo $CC_quoted` "* | "`$echo $CC_quoted` "*)
-	      # The compiler in the base compile command matches
-	      # the one in the tagged configuration.
-	      # Assume this is the tagged configuration we want.
-	      tagname=$z
-	      break
-	      ;;
-	    esac
-	  fi
-	done
-	# If $tagname still isn't set, then no tagged configuration
-	# was found and let the user know that the "--tag" command
-	# line option must be used.
-	if test -z "$tagname"; then
-	  $echo "$modename: unable to infer tagged configuration"
-	  $echo "$modename: specify a tag with \`--tag'" 1>&2
-	  exit $EXIT_FAILURE
-#        else
-#          $echo "$modename: using $tagname tagged configuration"
-	fi
-	;;
-      esac
-    fi
+        my_arg="$1" ;;
+    esac
+
+    case $my_arg in
+      # Double-quote args containing shell metacharacters to delay
+      # word splitting and command substitution for a subsequent eval.
+      # Many Bourne shells cannot handle close brackets correctly
+      # in scan sets, so we specify it separately.
+      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
+        my_arg="\"$my_arg\""
+        ;;
+    esac
+
+    func_quote_for_expand_result="$my_arg"
 }
 
 
-# func_extract_an_archive dir oldlib
-func_extract_an_archive ()
+# func_show_eval cmd [fail_exp]
+# Unless opt_silent is true, then output CMD.  Then, if opt_dryrun is
+# not true, evaluate CMD.  If the evaluation of CMD fails, and FAIL_EXP
+# is given, then evaluate it.
+func_show_eval ()
 {
-    f_ex_an_ar_dir="$1"; shift
-    f_ex_an_ar_oldlib="$1"
+    my_cmd="$1"
+    my_fail_exp="${2-:}"
 
-    $show "(cd $f_ex_an_ar_dir && $AR x $f_ex_an_ar_oldlib)"
-    $run eval "(cd \$f_ex_an_ar_dir && $AR x \$f_ex_an_ar_oldlib)" || exit $?
-    if ($AR t "$f_ex_an_ar_oldlib" | sort | sort -uc >/dev/null 2>&1); then
-     :
-    else
-      $echo "$modename: ERROR: object name conflicts: $f_ex_an_ar_dir/$f_ex_an_ar_oldlib" 1>&2
-      exit $EXIT_FAILURE
+    ${opt_silent-false} || {
+      func_quote_for_expand "$my_cmd"
+      eval "func_echo $func_quote_for_expand_result"
+    }
+
+    if ${opt_dry_run-false}; then :; else
+      eval "$my_cmd"
+      my_status=$?
+      if test "$my_status" -eq 0; then :; else
+	eval "(exit $my_status); $my_fail_exp"
+      fi
     fi
 }
 
-# func_extract_archives gentop oldlib ...
-func_extract_archives ()
+
+# func_show_eval_locale cmd [fail_exp]
+# Unless opt_silent is true, then output CMD.  Then, if opt_dryrun is
+# not true, evaluate CMD.  If the evaluation of CMD fails, and FAIL_EXP
+# is given, then evaluate it.  Use the saved locale for evaluation.
+func_show_eval_locale ()
 {
-    my_gentop="$1"; shift
-    my_oldlibs=${1+"$@"}
-    my_oldobjs=""
-    my_xlib=""
-    my_xabs=""
-    my_xdir=""
-    my_status=""
+    my_cmd="$1"
+    my_fail_exp="${2-:}"
+
+    ${opt_silent-false} || {
+      func_quote_for_expand "$my_cmd"
+      eval "func_echo $func_quote_for_expand_result"
+    }
 
-    $show "${rm}r $my_gentop"
-    $run ${rm}r "$my_gentop"
-    $show "$mkdir $my_gentop"
-    $run $mkdir "$my_gentop"
-    my_status=$?
-    if test "$my_status" -ne 0 && test ! -d "$my_gentop"; then
-      exit $my_status
+    if ${opt_dry_run-false}; then :; else
+      eval "$lt_user_locale
+	    $my_cmd"
+      my_status=$?
+      eval "$lt_safe_locale"
+      if test "$my_status" -eq 0; then :; else
+	eval "(exit $my_status); $my_fail_exp"
+      fi
     fi
+}
 
-    for my_xlib in $my_oldlibs; do
-      # Extract the objects.
-      case $my_xlib in
-	[\\/]* | [A-Za-z]:[\\/]*) my_xabs="$my_xlib" ;;
-	*) my_xabs=`pwd`"/$my_xlib" ;;
-      esac
-      my_xlib=`$echo "X$my_xlib" | $Xsed -e 's%^.*/%%'`
-      my_xlib_u=$my_xlib
-      while :; do
-        case " $extracted_archives " in
-	*" $my_xlib_u "*)
-	  extracted_serial=`expr $extracted_serial + 1`
-	  my_xlib_u=lt$extracted_serial-$my_xlib ;;
-	*) break ;;
-	esac
-      done
-      extracted_archives="$extracted_archives $my_xlib_u"
-      my_xdir="$my_gentop/$my_xlib_u"
 
-      $show "${rm}r $my_xdir"
-      $run ${rm}r "$my_xdir"
-      $show "$mkdir $my_xdir"
-      $run $mkdir "$my_xdir"
-      exit_status=$?
-      if test "$exit_status" -ne 0 && test ! -d "$my_xdir"; then
-	exit $exit_status
-      fi
-      case $host in
-      *-darwin*)
-	$show "Extracting $my_xabs"
-	# Do not bother doing anything if just a dry run
-	if test -z "$run"; then
-	  darwin_orig_dir=`pwd`
-	  cd $my_xdir || exit $?
-	  darwin_archive=$my_xabs
-	  darwin_curdir=`pwd`
-	  darwin_base_archive=`$echo "X$darwin_archive" | $Xsed -e 's%^.*/%%'`
-	  darwin_arches=`lipo -info "$darwin_archive" 2>/dev/null | $EGREP Architectures 2>/dev/null`
-	  if test -n "$darwin_arches"; then 
-	    darwin_arches=`echo "$darwin_arches" | $SED -e 's/.*are://'`
-	    darwin_arch=
-	    $show "$darwin_base_archive has multiple architectures $darwin_arches"
-	    for darwin_arch in  $darwin_arches ; do
-	      mkdir -p "unfat-$$/${darwin_base_archive}-${darwin_arch}"
-	      lipo -thin $darwin_arch -output "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" "${darwin_archive}"
-	      cd "unfat-$$/${darwin_base_archive}-${darwin_arch}"
-	      func_extract_an_archive "`pwd`" "${darwin_base_archive}"
-	      cd "$darwin_curdir"
-	      $rm "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}"
-	    done # $darwin_arches
-      ## Okay now we have a bunch of thin objects, gotta fatten them up :)
-	    darwin_filelist=`find unfat-$$ -type f -name \*.o -print -o -name \*.lo -print| xargs basename | sort -u | $NL2SP`
-	    darwin_file=
-	    darwin_files=
-	    for darwin_file in $darwin_filelist; do
-	      darwin_files=`find unfat-$$ -name $darwin_file -print | $NL2SP`
-	      lipo -create -output "$darwin_file" $darwin_files
-	    done # $darwin_filelist
-	    ${rm}r unfat-$$
-	    cd "$darwin_orig_dir"
-	  else
-	    cd "$darwin_orig_dir"
- 	    func_extract_an_archive "$my_xdir" "$my_xabs"
-	  fi # $darwin_arches
-	fi # $run
-	;;
-      *)
-        func_extract_an_archive "$my_xdir" "$my_xabs"
-        ;;
-      esac
-      my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | $NL2SP`
-    done
-    func_extract_archives_result="$my_oldobjs"
+
+
+
+# func_version
+# Echo version message to standard output and exit.
+func_version ()
+{
+    $SED -n '/^# '$PROGRAM' (GNU /,/# warranty; / {
+        s/^# //
+	s/^# *$//
+        s/\((C)\)[ 0-9,-]*\( [1-9][0-9]*\)/\1\2/
+        p
+     }' < "$progpath"
+     exit $?
+}
+
+# func_usage
+# Echo short help message to standard output and exit.
+func_usage ()
+{
+    $SED -n '/^# Usage:/,/# -h/ {
+        s/^# //
+	s/^# *$//
+	s/\$progname/'$progname'/
+	p
+    }' < "$progpath"
+    $ECHO
+    $ECHO "run \`$progname --help | more' for full usage"
+    exit $?
+}
+
+# func_help
+# Echo long help message to standard output and exit.
+func_help ()
+{
+    $SED -n '/^# Usage:/,/# Report bugs to/ {
+        s/^# //
+	s/^# *$//
+	s*\$progname*'$progname'*
+	s*\$host*'"$host"'*
+	s*\$SHELL*'"$SHELL"'*
+	s*\$LTCC*'"$LTCC"'*
+	s*\$LTCFLAGS*'"$LTCFLAGS"'*
+	s*\$LD*'"$LD"'*
+	s/\$with_gnu_ld/'"$with_gnu_ld"'/
+	s/\$automake_version/'"`(automake --version) 2>/dev/null |$SED 1q`"'/
+	s/\$autoconf_version/'"`(autoconf --version) 2>/dev/null |$SED 1q`"'/
+	p
+     }' < "$progpath"
+    exit $?
+}
+
+# func_missing_arg argname
+# Echo program name prefixed message to standard error and set global
+# exit_cmd.
+func_missing_arg ()
+{
+    func_error "missing argument for $1"
+    exit_cmd=exit
 }
-# End of Shell function definitions
-#####################################
 
-# Darwin sucks
-eval std_shrext=\"$shrext_cmds\"
+exit_cmd=:
 
-disable_libs=no
 
-# Parse our command line options once, thoroughly.
-while test "$#" -gt 0
-do
-  arg="$1"
+
+
+
+# Check that we have a working $ECHO.
+if test "X$1" = X--no-reexec; then
+  # Discard the --no-reexec flag, and continue.
   shift
+elif test "X$1" = X--fallback-echo; then
+  # Avoid inline document here, it may be left over
+  :
+elif test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t'; then
+  # Yippee, $ECHO works!
+  :
+else
+  # Restart under the correct shell, and then maybe $ECHO will work.
+  exec $SHELL "$progpath" --no-reexec ${1+"$@"}
+fi
 
-  case $arg in
-  -*=*) optarg=`$echo "X$arg" | $Xsed -e 's/[-_a-zA-Z0-9]*=//'` ;;
-  *) optarg= ;;
-  esac
+if test "X$1" = X--fallback-echo; then
+  # used as fallback echo
+  shift
+  cat <<EOF
+$*
+EOF
+  exit $EXIT_SUCCESS
+fi
 
-  # If the previous option needs an argument, assign it.
-  if test -n "$prev"; then
-    case $prev in
-    execute_dlfiles)
-      execute_dlfiles="$execute_dlfiles $arg"
-      ;;
-    tag)
-      tagname="$arg"
-      preserve_args="${preserve_args}=$arg"
-
-      # Check whether tagname contains only valid characters
-      case $tagname in
-      *[!-_A-Za-z0-9,/]*)
-	$echo "$progname: invalid tag name: $tagname" 1>&2
-	exit $EXIT_FAILURE
-	;;
-      esac
+magic="%%%MAGIC variable%%%"
+magic_exe="%%%MAGIC EXE variable%%%"
 
-      case $tagname in
-      CC)
-	# Don't test for the "default" C tag, as we know, it's there, but
-	# not specially marked.
-	;;
-      *)
-	if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "$progpath" > /dev/null; then
-	  taglist="$taglist $tagname"
-	  # Evaluate the configuration.
-	  eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$tagname'$/,/^# ### END LIBTOOL TAG CONFIG: '$tagname'$/p' < $progpath`"
-	else
-	  $echo "$progname: ignoring unknown tag $tagname" 1>&2
-	fi
-	;;
-      esac
-      ;;
-    *)
-      eval "$prev=\$arg"
-      ;;
-    esac
+# Global variables.
+# $mode is unset
+nonopt=
+execute_dlfiles=
+preserve_args=
+lo2o="s/\\.lo\$/.${objext}/"
+o2lo="s/\\.${objext}\$/.lo/"
+extracted_archives=
+extracted_serial=0
 
-    prev=
-    prevopt=
-    continue
-  fi
+opt_dry_run=false
+opt_duplicate_deps=false
+opt_silent=false
+opt_debug=:
 
-  # Have we seen a non-optional argument yet?
-  case $arg in
-  --help)
-    show_help=yes
-    ;;
+# If this variable is set in any of the actions, the command in it
+# will be execed at the end.  This prevents here-documents from being
+# left over by shells.
+exec_cmd=
 
-  --version)
-    echo "\
-$PROGRAM (GNU $PACKAGE) $VERSION$TIMESTAMP
-
-Copyright (C) 2008  Free Software Foundation, Inc.
-This is free software; see the source for copying conditions.  There is NO
-warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
-    exit $?
-    ;;
+# func_fatal_configuration arg...
+# Echo program name prefixed message to standard error, followed by
+# a configuration failure hint, and exit.
+func_fatal_configuration ()
+{
+    func_error ${1+"$@"}
+    func_error "See the $PACKAGE documentation for more information."
+    func_fatal_error "Fatal configuration error."
+}
+
+
+# func_config
+# Display the configuration for all the tags in this script.
+func_config ()
+{
+    re_begincf='^# ### BEGIN LIBTOOL'
+    re_endcf='^# ### END LIBTOOL'
+
+    # Default configuration.
+    $SED "1,/$re_begincf CONFIG/d;/$re_endcf CONFIG/,\$d" < "$progpath"
 
-  --config)
-    ${SED} -e '1,/^# ### BEGIN LIBTOOL CONFIG/d' -e '/^# ### END LIBTOOL CONFIG/,$d' $progpath
     # Now print the configurations for the tags.
     for tagname in $taglist; do
-      ${SED} -n -e "/^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$/,/^# ### END LIBTOOL TAG CONFIG: $tagname$/p" < "$progpath"
+      $SED -n "/$re_begincf TAG CONFIG: $tagname\$/,/$re_endcf TAG CONFIG: $tagname\$/p" < "$progpath"
     done
-    exit $?
-    ;;
 
-  --debug)
-    $echo "$progname: enabling shell trace mode"
-    set -x
-    preserve_args="$preserve_args $arg"
-    ;;
-
-  --dry-run | -n)
-    run=:
-    ;;
+    exit $?
+}
 
-  --features)
-    $echo "host: $host"
+# func_features
+# Display the features supported by this script.
+func_features ()
+{
+    $ECHO "host: $host"
     if test "$build_libtool_libs" = yes; then
-      $echo "enable shared libraries"
+      $ECHO "enable shared libraries"
     else
-      $echo "disable shared libraries"
+      $ECHO "disable shared libraries"
     fi
     if test "$build_old_libs" = yes; then
-      $echo "enable static libraries"
+      $ECHO "enable static libraries"
     else
-      $echo "disable static libraries"
+      $ECHO "disable static libraries"
     fi
+
     exit $?
-    ;;
+}
+
+# func_enable_tag tagname
+# Verify that TAGNAME is valid, and either flag an error and exit, or
+# enable the TAGNAME tag.  We also add TAGNAME to the global $taglist
+# variable here.
+func_enable_tag ()
+{
+  # Global variable:
+  tagname="$1"
 
-  --finish) mode="finish" ;;
+  re_begincf="^# ### BEGIN LIBTOOL TAG CONFIG: $tagname\$"
+  re_endcf="^# ### END LIBTOOL TAG CONFIG: $tagname\$"
+  sed_extractcf="/$re_begincf/,/$re_endcf/p"
+
+  # Validate tagname.
+  case $tagname in
+    *[!-_A-Za-z0-9,/]*)
+      func_fatal_error "invalid tag name: $tagname"
+      ;;
+  esac
 
-  --mode) prevopt="--mode" prev=mode ;;
-  --mode=*) mode="$optarg" ;;
+  # Don't test for the "default" C tag, as we know it's
+  # there but not specially marked.
+  case $tagname in
+    CC) ;;
+    *)
+      if $GREP "$re_begincf" "$progpath" >/dev/null 2>&1; then
+	taglist="$taglist $tagname"
 
-  --preserve-dup-deps) duplicate_deps="yes" ;;
+	# Evaluate the configuration.  Be careful to quote the path
+	# and the sed script, to avoid splitting on whitespace, but
+	# also don't use non-portable quotes within backquotes within
+	# quotes we have to do it in 2 steps:
+	extractedcf=`$SED -n -e "$sed_extractcf" < "$progpath"`
+	eval "$extractedcf"
+      else
+	func_error "ignoring unknown tag $tagname"
+      fi
+      ;;
+  esac
+}
 
-  --quiet | --silent)
-    show=:
-    preserve_args="$preserve_args $arg"
-    ;;
+# Parse options once, thoroughly.  This comes as soon as possible in
+# the script to make things like `libtool --version' happen quickly.
+{
 
-  --tag)
-    prevopt="--tag"
-    prev=tag
-    preserve_args="$preserve_args --tag"
+  # Shorthand for --mode=foo, only valid as the first argument
+  case $1 in
+  clean|clea|cle|cl)
+    shift; set dummy --mode clean ${1+"$@"}; shift
     ;;
-  --tag=*)
-    set tag "$optarg" ${1+"$@"}
-    shift
-    prev=tag
-    preserve_args="$preserve_args --tag"
+  compile|compil|compi|comp|com|co|c)
+    shift; set dummy --mode compile ${1+"$@"}; shift
     ;;
-
-  -dlopen)
-    prevopt="-dlopen"
-    prev=execute_dlfiles
+  execute|execut|execu|exec|exe|ex|e)
+    shift; set dummy --mode execute ${1+"$@"}; shift
     ;;
-
-  -*)
-    $echo "$modename: unrecognized option \`$arg'" 1>&2
-    $echo "$help" 1>&2
-    exit $EXIT_FAILURE
+  finish|finis|fini|fin|fi|f)
+    shift; set dummy --mode finish ${1+"$@"}; shift
     ;;
-
-  *)
-    nonopt="$arg"
-    break
+  install|instal|insta|inst|ins|in|i)
+    shift; set dummy --mode install ${1+"$@"}; shift
+    ;;
+  link|lin|li|l)
+    shift; set dummy --mode link ${1+"$@"}; shift
+    ;;
+  uninstall|uninstal|uninsta|uninst|unins|unin|uni|un|u)
+    shift; set dummy --mode uninstall ${1+"$@"}; shift
     ;;
   esac
-done
 
-if test -n "$prevopt"; then
-  $echo "$modename: option \`$prevopt' requires an argument" 1>&2
-  $echo "$help" 1>&2
-  exit $EXIT_FAILURE
-fi
+  # Parse non-mode specific arguments:
+  while test "$#" -gt 0; do
+    opt="$1"
+    shift
 
-case $disable_libs in
-no) 
-  ;;
-shared)
-  build_libtool_libs=no
-  build_old_libs=yes
-  ;;
-static)
-  build_old_libs=`case $build_libtool_libs in yes) echo no;; *) echo yes;; esac`
-  ;;
-esac
+    case $opt in
+      --config)		func_config					;;
 
-# If this variable is set in any of the actions, the command in it
-# will be execed at the end.  This prevents here-documents from being
-# left over by shells.
-exec_cmd=
+      --debug)		preserve_args="$preserve_args $opt"
+			func_echo "enabling shell trace mode"
+			opt_debug='set -x'
+			$opt_debug
+			;;
 
-if test -z "$show_help"; then
+      -dlopen)		test "$#" -eq 0 && func_missing_arg "$opt" && break
+			execute_dlfiles="$execute_dlfiles $1"
+			shift
+			;;
 
-  # Infer the operation mode.
-  if test -z "$mode"; then
-    $echo "*** Warning: inferring the mode of operation is deprecated." 1>&2
-    $echo "*** Future versions of Libtool will require --mode=MODE be specified." 1>&2
-    case $nonopt in
-    *cc | cc* | *++ | gcc* | *-gcc* | g++* | xlc*)
-      mode=link
-      for arg
-      do
-	case $arg in
-	-c)
-	   mode=compile
-	   break
-	   ;;
-	esac
-      done
-      ;;
-    *db | *dbx | *strace | *truss)
-      mode=execute
-      ;;
-    *install*|cp|mv)
-      mode=install
-      ;;
-    *rm)
-      mode=uninstall
+      --dry-run | -n)	opt_dry_run=:					;;
+      --features)       func_features					;;
+      --finish)		mode="finish"					;;
+
+      --mode)		test "$#" -eq 0 && func_missing_arg "$opt" && break
+			case $1 in
+			  # Valid mode arguments:
+			  clean)	;;
+			  compile)	;;
+			  execute)	;;
+			  finish)	;;
+			  install)	;;
+			  link)		;;
+			  relink)	;;
+			  uninstall)	;;
+
+			  # Catch anything else as an error
+			  *) func_error "invalid argument for $opt"
+			     exit_cmd=exit
+			     break
+			     ;;
+		        esac
+
+			mode="$1"
+			shift
+			;;
+
+      --preserve-dup-deps)
+			opt_duplicate_deps=:				;;
+
+      --quiet|--silent)	preserve_args="$preserve_args $opt"
+			opt_silent=:
+			;;
+
+      --verbose| -v)	preserve_args="$preserve_args $opt"
+			opt_silent=false
+			;;
+
+      --tag)		test "$#" -eq 0 && func_missing_arg "$opt" && break
+			preserve_args="$preserve_args $opt $1"
+			func_enable_tag "$1"	# tagname is set here
+			shift
+			;;
+
+      # Separate optargs to long options:
+      -dlopen=*|--mode=*|--tag=*)
+			func_opt_split "$opt"
+			set dummy "$func_opt_split_opt" "$func_opt_split_arg" ${1+"$@"}
+			shift
+			;;
+
+      -\?|-h)		func_usage					;;
+      --help)		opt_help=:					;;
+      --version)	func_version					;;
+
+      -*)		func_fatal_help "unrecognized option \`$opt'"	;;
+
+      *)		nonopt="$opt"
+			break
+			;;
+    esac
+  done
+
+
+  case $host in
+    *cygwin* | *mingw* | *pw32* | *cegcc*)
+      # don't eliminate duplications in $postdeps and $predeps
+      opt_duplicate_compiler_generated_deps=:
       ;;
     *)
-      # If we have no mode, but dlfiles were specified, then do execute mode.
-      test -n "$execute_dlfiles" && mode=execute
+      opt_duplicate_compiler_generated_deps=$opt_duplicate_deps
+      ;;
+  esac
 
-      # Just use the default operation mode.
-      if test -z "$mode"; then
-	if test -n "$nonopt"; then
-	  $echo "$modename: warning: cannot infer operation mode from \`$nonopt'" 1>&2
-	else
-	  $echo "$modename: warning: cannot infer operation mode without MODE-ARGS" 1>&2
-	fi
+  # Having warned about all mis-specified options, bail out if
+  # anything was wrong.
+  $exit_cmd $EXIT_FAILURE
+}
+
+# func_check_version_match
+# Ensure that we are using m4 macros, and libtool script from the same
+# release of libtool.
+func_check_version_match ()
+{
+  if test "$package_revision" != "$macro_revision"; then
+    if test "$VERSION" != "$macro_version"; then
+      if test -z "$macro_version"; then
+        cat >&2 <<_LT_EOF
+$progname: Version mismatch error.  This is $PACKAGE $VERSION, but the
+$progname: definition of this LT_INIT comes from an older release.
+$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION
+$progname: and run autoconf again.
+_LT_EOF
+      else
+        cat >&2 <<_LT_EOF
+$progname: Version mismatch error.  This is $PACKAGE $VERSION, but the
+$progname: definition of this LT_INIT comes from $PACKAGE $macro_version.
+$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION
+$progname: and run autoconf again.
+_LT_EOF
       fi
-      ;;
-    esac
+    else
+      cat >&2 <<_LT_EOF
+$progname: Version mismatch error.  This is $PACKAGE $VERSION, revision $package_revision,
+$progname: but the definition of this LT_INIT comes from revision $macro_revision.
+$progname: You should recreate aclocal.m4 with macros from revision $package_revision
+$progname: of $PACKAGE $VERSION and run autoconf again.
+_LT_EOF
+    fi
+
+    exit $EXIT_MISMATCH
+  fi
+}
+
+
+## ----------- ##
+##    Main.    ##
+## ----------- ##
+
+$opt_help || {
+  # Sanity checks first:
+  func_check_version_match
+
+  if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then
+    func_fatal_configuration "not configured to build any kind of library"
   fi
 
+  test -z "$mode" && func_fatal_error "error: you must specify a MODE."
+
+
+  # Darwin sucks
+  eval std_shrext=\"$shrext_cmds\"
+
+
   # Only execute mode is allowed to have -dlopen flags.
   if test -n "$execute_dlfiles" && test "$mode" != execute; then
-    $echo "$modename: unrecognized option \`-dlopen'" 1>&2
-    $echo "$help" 1>&2
+    func_error "unrecognized option \`-dlopen'"
+    $ECHO "$help" 1>&2
     exit $EXIT_FAILURE
   fi
 
   # Change the help message to a mode-specific one.
   generic_help="$help"
-  help="Try \`$modename --help --mode=$mode' for more information."
+  help="Try \`$progname --help --mode=$mode' for more information."
+}
 
-  # These modes are in order of execution frequency so that they run quickly.
-  case $mode in
-  # libtool compile mode
-  compile)
-    modename="$modename: compile"
-    # Get the compilation command and the source file.
-    base_compile=
-    srcfile="$nonopt"  #  always keep a non-empty value in "srcfile"
-    suppress_opt=yes
-    suppress_output=
-    arg_mode=normal
-    libobj=
-    later=
 
-    for arg
-    do
-      case $arg_mode in
-      arg  )
-	# do not "continue".  Instead, add this to base_compile
-	lastarg="$arg"
-	arg_mode=normal
-	;;
+# func_lalib_p file
+# True iff FILE is a libtool `.la' library or `.lo' object file.
+# This function is only a basic sanity check; it will hardly flush out
+# determined imposters.
+func_lalib_p ()
+{
+    test -f "$1" &&
+      $SED -e 4q "$1" 2>/dev/null \
+        | $GREP "^# Generated by .*$PACKAGE" > /dev/null 2>&1
+}
 
-      target )
-	libobj="$arg"
-	arg_mode=normal
-	continue
-	;;
+# func_lalib_unsafe_p file
+# True iff FILE is a libtool `.la' library or `.lo' object file.
+# This function implements the same check as func_lalib_p without
+# resorting to external programs.  To this end, it redirects stdin and
+# closes it afterwards, without saving the original file descriptor.
+# As a safety measure, use it only where a negative result would be
+# fatal anyway.  Works if `file' does not exist.
+func_lalib_unsafe_p ()
+{
+    lalib_p=no
+    if test -f "$1" && test -r "$1" && exec 5<&0 <"$1"; then
+	for lalib_p_l in 1 2 3 4
+	do
+	    read lalib_p_line
+	    case "$lalib_p_line" in
+		\#\ Generated\ by\ *$PACKAGE* ) lalib_p=yes; break;;
+	    esac
+	done
+	exec 0<&5 5<&-
+    fi
+    test "$lalib_p" = yes
+}
 
-      normal )
-	# Accept any command-line options.
-	case $arg in
-	-o)
-	  if test -n "$libobj" ; then
-	    $echo "$modename: you cannot specify \`-o' more than once" 1>&2
-	    exit $EXIT_FAILURE
-	  fi
-	  arg_mode=target
-	  continue
-	  ;;
+# func_ltwrapper_script_p file
+# True iff FILE is a libtool wrapper script
+# This function is only a basic sanity check; it will hardly flush out
+# determined imposters.
+func_ltwrapper_script_p ()
+{
+    func_lalib_p "$1"
+}
 
-	-static | -prefer-pic | -prefer-non-pic)
-	  later="$later $arg"
-	  continue
+# func_ltwrapper_executable_p file
+# True iff FILE is a libtool wrapper executable
+# This function is only a basic sanity check; it will hardly flush out
+# determined imposters.
+func_ltwrapper_executable_p ()
+{
+    func_ltwrapper_exec_suffix=
+    case $1 in
+    *.exe) ;;
+    *) func_ltwrapper_exec_suffix=.exe ;;
+    esac
+    $GREP "$magic_exe" "$1$func_ltwrapper_exec_suffix" >/dev/null 2>&1
+}
+
+# func_ltwrapper_scriptname file
+# Assumes file is an ltwrapper_executable
+# uses $file to determine the appropriate filename for a
+# temporary ltwrapper_script.
+func_ltwrapper_scriptname ()
+{
+    func_ltwrapper_scriptname_result=""
+    if func_ltwrapper_executable_p "$1"; then
+	func_dirname_and_basename "$1" "" "."
+	func_stripname '' '.exe' "$func_basename_result"
+	func_ltwrapper_scriptname_result="$func_dirname_result/$objdir/${func_stripname_result}_ltshwrapper"
+    fi
+}
+
+# func_ltwrapper_p file
+# True iff FILE is a libtool wrapper script or wrapper executable
+# This function is only a basic sanity check; it will hardly flush out
+# determined imposters.
+func_ltwrapper_p ()
+{
+    func_ltwrapper_script_p "$1" || func_ltwrapper_executable_p "$1"
+}
+
+
+# func_execute_cmds commands fail_cmd
+# Execute tilde-delimited COMMANDS.
+# If FAIL_CMD is given, eval that upon failure.
+# FAIL_CMD may read-access the current command in variable CMD!
+func_execute_cmds ()
+{
+    $opt_debug
+    save_ifs=$IFS; IFS='~'
+    for cmd in $1; do
+      IFS=$save_ifs
+      eval cmd=\"$cmd\"
+      func_show_eval "$cmd" "${2-:}"
+    done
+    IFS=$save_ifs
+}
+
+
+# func_source file
+# Source FILE, adding directory component if necessary.
+# Note that it is not necessary on cygwin/mingw to append a dot to
+# FILE even if both FILE and FILE.exe exist: automatic-append-.exe
+# behavior happens only for exec(3), not for open(2)!  Also, sourcing
+# `FILE.' does not work on cygwin managed mounts.
+func_source ()
+{
+    $opt_debug
+    case $1 in
+    */* | *\\*)	. "$1" ;;
+    *)		. "./$1" ;;
+    esac
+}
+
+
+# func_infer_tag arg
+# Infer tagged configuration to use if any are available and
+# if one wasn't chosen via the "--tag" command line option.
+# Only attempt this if the compiler in the base compile
+# command doesn't match the default compiler.
+# arg is usually of the form 'gcc ...'
+func_infer_tag ()
+{
+    $opt_debug
+    if test -n "$available_tags" && test -z "$tagname"; then
+      CC_quoted=
+      for arg in $CC; do
+        func_quote_for_eval "$arg"
+	CC_quoted="$CC_quoted $func_quote_for_eval_result"
+      done
+      case $@ in
+      # Blanks in the command may have been stripped by the calling shell,
+      # but not from the CC environment variable when configure was run.
+      " $CC "* | "$CC "* | " `$ECHO $CC` "* | "`$ECHO $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$ECHO $CC_quoted` "* | "`$ECHO $CC_quoted` "*) ;;
+      # Blanks at the start of $base_compile will cause this to fail
+      # if we don't check for them as well.
+      *)
+	for z in $available_tags; do
+	  if $GREP "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$progpath" > /dev/null; then
+	    # Evaluate the configuration.
+	    eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $progpath`"
+	    CC_quoted=
+	    for arg in $CC; do
+	      # Double-quote args containing other shell metacharacters.
+	      func_quote_for_eval "$arg"
+	      CC_quoted="$CC_quoted $func_quote_for_eval_result"
+	    done
+	    case "$@ " in
+	      " $CC "* | "$CC "* | " `$ECHO $CC` "* | "`$ECHO $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$ECHO $CC_quoted` "* | "`$ECHO $CC_quoted` "*)
+	      # The compiler in the base compile command matches
+	      # the one in the tagged configuration.
+	      # Assume this is the tagged configuration we want.
+	      tagname=$z
+	      break
+	      ;;
+	    esac
+	  fi
+	done
+	# If $tagname still isn't set, then no tagged configuration
+	# was found and let the user know that the "--tag" command
+	# line option must be used.
+	if test -z "$tagname"; then
+	  func_echo "unable to infer tagged configuration"
+	  func_fatal_error "specify a tag with \`--tag'"
+#	else
+#	  func_verbose "using $tagname tagged configuration"
+	fi
+	;;
+      esac
+    fi
+}
+
+
+
+# func_write_libtool_object output_name pic_name nonpic_name
+# Create a libtool object file (analogous to a ".la" file),
+# but don't create it if we're doing a dry run.
+func_write_libtool_object ()
+{
+    write_libobj=${1}
+    if test "$build_libtool_libs" = yes; then
+      write_lobj=\'${2}\'
+    else
+      write_lobj=none
+    fi
+
+    if test "$build_old_libs" = yes; then
+      write_oldobj=\'${3}\'
+    else
+      write_oldobj=none
+    fi
+
+    $opt_dry_run || {
+      cat >${write_libobj}T <<EOF
+# $write_libobj - a libtool object file
+# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
+#
+# Please DO NOT delete this file!
+# It is necessary for linking the library.
+
+# Name of the PIC object.
+pic_object=$write_lobj
+
+# Name of the non-PIC object
+non_pic_object=$write_oldobj
+
+EOF
+      $MV "${write_libobj}T" "${write_libobj}"
+    }
+}
+
+# func_mode_compile arg...
+func_mode_compile ()
+{
+    $opt_debug
+    # Get the compilation command and the source file.
+    base_compile=
+    srcfile="$nonopt"  #  always keep a non-empty value in "srcfile"
+    suppress_opt=yes
+    suppress_output=
+    arg_mode=normal
+    libobj=
+    later=
+    pie_flag=
+
+    for arg
+    do
+      case $arg_mode in
+      arg  )
+	# do not "continue".  Instead, add this to base_compile
+	lastarg="$arg"
+	arg_mode=normal
+	;;
+
+      target )
+	libobj="$arg"
+	arg_mode=normal
+	continue
+	;;
+
+      normal )
+	# Accept any command-line options.
+	case $arg in
+	-o)
+	  test -n "$libobj" && \
+	    func_fatal_error "you cannot specify \`-o' more than once"
+	  arg_mode=target
+	  continue
+	  ;;
+
+	-pie | -fpie | -fPIE)
+          pie_flag="$pie_flag $arg"
+	  continue
+	  ;;
+
+	-shared | -static | -prefer-pic | -prefer-non-pic)
+	  later="$later $arg"
+	  continue
 	  ;;
 
 	-no-suppress)
@@ -711,31 +1157,25 @@
 	  ;;            #  replaced later.  I would guess that would be a bug.
 
 	-Wc,*)
-	  args=`$echo "X$arg" | $Xsed -e "s/^-Wc,//"`
+	  func_stripname '-Wc,' '' "$arg"
+	  args=$func_stripname_result
 	  lastarg=
 	  save_ifs="$IFS"; IFS=','
- 	  for arg in $args; do
+	  for arg in $args; do
 	    IFS="$save_ifs"
-
-	    # Double-quote args containing other shell metacharacters.
-	    # Many Bourne shells cannot handle close brackets correctly
-	    # in scan sets, so we specify it separately.
-	    case $arg in
-	      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
-	      arg="\"$arg\""
-	      ;;
-	    esac
-	    lastarg="$lastarg $arg"
+	    func_quote_for_eval "$arg"
+	    lastarg="$lastarg $func_quote_for_eval_result"
 	  done
 	  IFS="$save_ifs"
-	  lastarg=`$echo "X$lastarg" | $Xsed -e "s/^ //"`
+	  func_stripname ' ' '' "$lastarg"
+	  lastarg=$func_stripname_result
 
 	  # Add the arguments to base_compile.
 	  base_compile="$base_compile $lastarg"
 	  continue
 	  ;;
 
-	* )
+	*)
 	  # Accept the current argument as the source file.
 	  # The previous "srcfile" becomes the current argument.
 	  #
@@ -747,66 +1187,42 @@
       esac    #  case $arg_mode
 
       # Aesthetically quote the previous argument.
-      lastarg=`$echo "X$lastarg" | $Xsed -e "$sed_quote_subst"`
-
-      case $lastarg in
-      # Double-quote args containing other shell metacharacters.
-      # Many Bourne shells cannot handle close brackets correctly
-      # in scan sets, and some SunOS ksh mistreat backslash-escaping
-      # in scan sets (worked around with variable expansion),
-      # and furthermore cannot handle '|' '&' '(' ')' in scan sets 
-      # at all, so we specify them separately.
-      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
-	lastarg="\"$lastarg\""
-	;;
-      esac
-
-      base_compile="$base_compile $lastarg"
+      func_quote_for_eval "$lastarg"
+      base_compile="$base_compile $func_quote_for_eval_result"
     done # for arg
 
     case $arg_mode in
     arg)
-      $echo "$modename: you must specify an argument for -Xcompile"
-      exit $EXIT_FAILURE
+      func_fatal_error "you must specify an argument for -Xcompile"
       ;;
     target)
-      $echo "$modename: you must specify a target with \`-o'" 1>&2
-      exit $EXIT_FAILURE
+      func_fatal_error "you must specify a target with \`-o'"
       ;;
     *)
       # Get the name of the library object.
-      [ -z "$libobj" ] && libobj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%'`
+      test -z "$libobj" && {
+	func_basename "$srcfile"
+	libobj="$func_basename_result"
+      }
       ;;
     esac
 
     # Recognize several different file suffixes.
     # If the user specifies -o file.o, it is replaced with file.lo
-    xform='[cCFSifmso]'
     case $libobj in
-    *.ada) xform=ada ;;
-    *.adb) xform=adb ;;
-    *.ads) xform=ads ;;
-    *.asm) xform=asm ;;
-    *.c++) xform=c++ ;;
-    *.cc) xform=cc ;;
-    *.ii) xform=ii ;;
-    *.class) xform=class ;;
-    *.cpp) xform=cpp ;;
-    *.cxx) xform=cxx ;;
-    *.[fF][09]?) xform=[fF][09]. ;;
-    *.for) xform=for ;;
-    *.java) xform=java ;;
-    *.obj) xform=obj ;;
-    *.sx) xform=sx ;;
+    *.[cCFSifmso] | \
+    *.ada | *.adb | *.ads | *.asm | \
+    *.c++ | *.cc | *.ii | *.class | *.cpp | *.cxx | \
+    *.[fF][09]? | *.for | *.java | *.obj | *.sx)
+      func_xform "$libobj"
+      libobj=$func_xform_result
+      ;;
     esac
 
-    libobj=`$echo "X$libobj" | $Xsed -e "s/\.$xform$/.lo/"`
-
     case $libobj in
-    *.lo) obj=`$echo "X$libobj" | $Xsed -e "$lo2o"` ;;
+    *.lo) func_lo2o "$libobj"; obj=$func_lo2o_result ;;
     *)
-      $echo "$modename: cannot determine name of library object from \`$libobj'" 1>&2
-      exit $EXIT_FAILURE
+      func_fatal_error "cannot determine name of library object from \`$libobj'"
       ;;
     esac
 
@@ -814,7 +1230,15 @@
 
     for arg in $later; do
       case $arg in
+      -shared)
+	test "$build_libtool_libs" != yes && \
+	  func_fatal_configuration "can not build a shared library"
+	build_old_libs=no
+	continue
+	;;
+
       -static)
+	build_libtool_libs=no
 	build_old_libs=yes
 	continue
 	;;
@@ -831,28 +1255,17 @@
       esac
     done
 
-    qlibobj=`$echo "X$libobj" | $Xsed -e "$sed_quote_subst"`
-    case $qlibobj in
-      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
-	qlibobj="\"$qlibobj\"" ;;
-    esac
-    test "X$libobj" != "X$qlibobj" \
-	&& $echo "X$libobj" | grep '[]~#^*{};<>?"'"'"' 	&()|`$[]' \
-	&& $echo "$modename: libobj name \`$libobj' may not contain shell special characters."
-    objname=`$echo "X$obj" | $Xsed -e 's%^.*/%%'`
-    xdir=`$echo "X$obj" | $Xsed -e 's%/[^/]*$%%'`
-    if test "X$xdir" = "X$obj"; then
-      xdir=
-    else
-      xdir=$xdir/
-    fi
+    func_quote_for_eval "$libobj"
+    test "X$libobj" != "X$func_quote_for_eval_result" \
+      && $ECHO "X$libobj" | $GREP '[]~#^*{};<>?"'"'"'	 &()|`$[]' \
+      && func_warning "libobj name \`$libobj' may not contain shell special characters."
+    func_dirname_and_basename "$obj" "/" ""
+    objname="$func_basename_result"
+    xdir="$func_dirname_result"
     lobj=${xdir}$objdir/$objname
 
-    if test -z "$base_compile"; then
-      $echo "$modename: you must specify a compilation command" 1>&2
-      $echo "$help" 1>&2
-      exit $EXIT_FAILURE
-    fi
+    test -z "$base_compile" && \
+      func_fatal_help "you must specify a compilation command"
 
     # Delete any leftover library objects.
     if test "$build_old_libs" = yes; then
@@ -861,12 +1274,9 @@
       removelist="$lobj $libobj ${libobj}T"
     fi
 
-    $run $rm $removelist
-    trap "$run $rm $removelist; exit $EXIT_FAILURE" 1 2 15
-
     # On Cygwin there's no "real" PIC flag so we must build both object types
     case $host_os in
-    cygwin* | mingw* | pw32* | os2*)
+    cygwin* | mingw* | pw32* | os2* | cegcc*)
       pic_mode=default
       ;;
     esac
@@ -878,10 +1288,8 @@
     # Calculate the filename of the output object if compiler does
     # not support -o with -c
     if test "$compiler_c_o" = no; then
-      output_obj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%' -e 's%\.[^.]*$%%'`.${objext}
+      output_obj=`$ECHO "X$srcfile" | $Xsed -e 's%^.*/%%' -e 's%\.[^.]*$%%'`.${objext}
       lockfile="$output_obj.lock"
-      removelist="$removelist $output_obj $lockfile"
-      trap "$run $rm $removelist; exit $EXIT_FAILURE" 1 2 15
     else
       output_obj=
       need_locks=no
@@ -891,13 +1299,13 @@
     # Lock this critical section if it is needed
     # We use this script file to make the link, it avoids creating a new file
     if test "$need_locks" = yes; then
-      until $run ln "$progpath" "$lockfile" 2>/dev/null; do
-	$show "Waiting for $lockfile to be removed"
+      until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do
+	func_echo "Waiting for $lockfile to be removed"
 	sleep 2
       done
     elif test "$need_locks" = warn; then
       if test -f "$lockfile"; then
-	$echo "\
+	$ECHO "\
 *** ERROR, $lockfile exists and contains:
 `cat $lockfile 2>/dev/null`
 
@@ -908,34 +1316,22 @@
 avoid parallel builds (make -j) in this platform, or get a better
 compiler."
 
-	$run $rm $removelist
+	$opt_dry_run || $RM $removelist
 	exit $EXIT_FAILURE
       fi
-      $echo "$srcfile" > "$lockfile"
+      removelist="$removelist $output_obj"
+      $ECHO "$srcfile" > "$lockfile"
     fi
 
+    $opt_dry_run || $RM $removelist
+    removelist="$removelist $lockfile"
+    trap '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE' 1 2 15
+
     if test -n "$fix_srcfile_path"; then
       eval srcfile=\"$fix_srcfile_path\"
     fi
-    qsrcfile=`$echo "X$srcfile" | $Xsed -e "$sed_quote_subst"`
-    case $qsrcfile in
-      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
-      qsrcfile="\"$qsrcfile\"" ;;
-    esac
-
-    $run $rm "$libobj" "${libobj}T"
-
-    # Create a libtool object file (analogous to a ".la" file),
-    # but don't create it if we're doing a dry run.
-    test -z "$run" && cat > ${libobj}T <<EOF
-# $libobj - a libtool object file
-# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP
-#
-# Please DO NOT delete this file!
-# It is necessary for linking the library.
-
-# Name of the PIC object.
-EOF
+    func_quote_for_eval "$srcfile"
+    qsrcfile=$func_quote_for_eval_result
 
     # Only build a PIC object if we are building libtool libraries.
     if test "$build_libtool_libs" = yes; then
@@ -949,32 +1345,19 @@
 	command="$base_compile $qsrcfile"
       fi
 
-      if test ! -d "${xdir}$objdir"; then
-	$show "$mkdir ${xdir}$objdir"
-	$run $mkdir ${xdir}$objdir
-	exit_status=$?
-	if test "$exit_status" -ne 0 && test ! -d "${xdir}$objdir"; then
-	  exit $exit_status
-	fi
-      fi
+      func_mkdir_p "$xdir$objdir"
 
       if test -z "$output_obj"; then
 	# Place PIC objects in $objdir
 	command="$command -o $lobj"
       fi
 
-      $run $rm "$lobj" "$output_obj"
-
-      $show "$command"
-      if $run eval $lt_env "$command"; then :
-      else
-	test -n "$output_obj" && $run $rm $removelist
-	exit $EXIT_FAILURE
-      fi
+      func_show_eval_locale "$command"	\
+          'test -n "$output_obj" && $RM $removelist; exit $EXIT_FAILURE'
 
       if test "$need_locks" = warn &&
 	 test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then
-	$echo "\
+	$ECHO "\
 *** ERROR, $lockfile contains:
 `cat $lockfile 2>/dev/null`
 
@@ -988,45 +1371,27 @@
 avoid parallel builds (make -j) in this platform, or get a better
 compiler."
 
-	$run $rm $removelist
+	$opt_dry_run || $RM $removelist
 	exit $EXIT_FAILURE
       fi
 
       # Just move the object if needed, then go on to compile the next one
       if test -n "$output_obj" && test "X$output_obj" != "X$lobj"; then
-	$show "$mv $output_obj $lobj"
-	if $run $mv $output_obj $lobj; then :
-	else
-	  error=$?
-	  $run $rm $removelist
-	  exit $error
-	fi
+	func_show_eval '$MV "$output_obj" "$lobj"' \
+	  'error=$?; $opt_dry_run || $RM $removelist; exit $error'
       fi
 
-      # Append the name of the PIC object to the libtool object file.
-      test -z "$run" && cat >> ${libobj}T <<EOF
-pic_object='$objdir/$objname'
-
-EOF
-
       # Allow error messages only from the first compilation.
       if test "$suppress_opt" = yes; then
-        suppress_output=' >/dev/null 2>&1'
+	suppress_output=' >/dev/null 2>&1'
       fi
-    else
-      # No PIC object so indicate it doesn't exist in the libtool
-      # object file.
-      test -z "$run" && cat >> ${libobj}T <<EOF
-pic_object=none
-
-EOF
     fi
 
     # Only build a position-dependent object if we build old libraries.
     if test "$build_old_libs" = yes; then
       if test "$pic_mode" != yes; then
 	# Don't build PIC code
-	command="$base_compile $qsrcfile"
+	command="$base_compile $qsrcfile$pie_flag"
       else
 	command="$base_compile $qsrcfile $pic_flag"
       fi
@@ -1036,17 +1401,12 @@
 
       # Suppress compiler output if we already did a PIC compilation.
       command="$command$suppress_output"
-      $run $rm "$obj" "$output_obj"
-      $show "$command"
-      if $run eval $lt_env "$command"; then :
-      else
-	$run $rm $removelist
-	exit $EXIT_FAILURE
-      fi
+      func_show_eval_locale "$command" \
+        '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE'
 
       if test "$need_locks" = warn &&
 	 test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then
-	$echo "\
+	$ECHO "\
 *** ERROR, $lockfile contains:
 `cat $lockfile 2>/dev/null`
 
@@ -1060,5494 +1420,6784 @@
 avoid parallel builds (make -j) in this platform, or get a better
 compiler."
 
-	$run $rm $removelist
+	$opt_dry_run || $RM $removelist
 	exit $EXIT_FAILURE
       fi
 
       # Just move the object if needed
       if test -n "$output_obj" && test "X$output_obj" != "X$obj"; then
-	$show "$mv $output_obj $obj"
-	if $run $mv $output_obj $obj; then :
-	else
-	  error=$?
-	  $run $rm $removelist
-	  exit $error
-	fi
+	func_show_eval '$MV "$output_obj" "$obj"' \
+	  'error=$?; $opt_dry_run || $RM $removelist; exit $error'
       fi
-
-      # Append the name of the non-PIC object the libtool object file.
-      # Only append if the libtool object file exists.
-      test -z "$run" && cat >> ${libobj}T <<EOF
-# Name of the non-PIC object.
-non_pic_object='$objname'
-
-EOF
-    else
-      # Append the name of the non-PIC object the libtool object file.
-      # Only append if the libtool object file exists.
-      test -z "$run" && cat >> ${libobj}T <<EOF
-# Name of the non-PIC object.
-non_pic_object=none
-
-EOF
     fi
 
-    $run $mv "${libobj}T" "${libobj}"
+    $opt_dry_run || {
+      func_write_libtool_object "$libobj" "$objdir/$objname" "$objname"
 
-    # Unlock the critical section if it was locked
-    if test "$need_locks" != no; then
-      $run $rm "$lockfile"
-    fi
+      # Unlock the critical section if it was locked
+      if test "$need_locks" != no; then
+	removelist=$lockfile
+        $RM "$lockfile"
+      fi
+    }
 
     exit $EXIT_SUCCESS
-    ;;
+}
 
-  # libtool link mode
-  link | relink)
-    modename="$modename: link"
-    case $host in
-    *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
-      # It is impossible to link a dll without this setting, and
-      # we shouldn't force the makefile maintainer to figure out
-      # which system we are compiling for in order to pass an extra
-      # flag for every libtool invocation.
-      # allow_undefined=no
+$opt_help || {
+test "$mode" = compile && func_mode_compile ${1+"$@"}
+}
 
-      # FIXME: Unfortunately, there are problems with the above when trying
-      # to make a dll which has undefined symbols, in which case not
-      # even a static library is built.  For now, we need to specify
-      # -no-undefined on the libtool link line when we can be certain
-      # that all symbols are satisfied, otherwise we get a static library.
-      allow_undefined=yes
-      ;;
-    *)
-      allow_undefined=yes
-      ;;
-    esac
-    libtool_args="$nonopt"
-    base_compile="$nonopt $@"
-    compile_command="$nonopt"
-    finalize_command="$nonopt"
+func_mode_help ()
+{
+    # We need to display help for each of the modes.
+    case $mode in
+      "")
+        # Generic help is extracted from the usage comments
+        # at the start of this file.
+        func_help
+        ;;
 
-    compile_rpath=
-    finalize_rpath=
-    compile_shlibpath=
-    finalize_shlibpath=
-    convenience=
-    old_convenience=
-    deplibs=
-    old_deplibs=
-    compiler_flags=
-    linker_flags=
-    dllsearchpath=
-    lib_search_path=`pwd`
-    inst_prefix_dir=
+      clean)
+        $ECHO \
+"Usage: $progname [OPTION]... --mode=clean RM [RM-OPTION]... FILE...
 
-    avoid_version=no
-    dlfiles=
-    dlprefiles=
-    dlself=no
-    export_dynamic=no
-    export_symbols=
-    export_symbols_regex=
-    generated=
-    libobjs=
-    ltlibs=
-    module=no
-    no_install=no
-    objs=
-    non_pic_objects=
-    notinst_path= # paths that contain not-installed libtool libraries
-    precious_files_regex=
-    prefer_static_libs=no
-    preload=no
-    prev=
-    prevarg=
-    release=
-    rpath=
-    xrpath=
-    perm_rpath=
-    temp_rpath=
-    thread_safe=no
-    vinfo=
-    vinfo_number=no
-    single_module="${wl}-single_module"
+Remove files from the build directory.
 
-    func_infer_tag $base_compile
+RM is the name of the program to use to delete files associated with each FILE
+(typically \`/bin/rm').  RM-OPTIONS are options (such as \`-f') to be passed
+to RM.
 
-    # We need to know -static, to get the right output filenames.
-    for arg
-    do
-      case $arg in
-      -all-static | -static | -static-libtool-libs)
-	case $arg in
-	-all-static)
-	  if test "$build_libtool_libs" = yes && test -z "$link_static_flag"; then
-	    $echo "$modename: warning: complete static linking is impossible in this configuration" 1>&2
-	  fi
-	  if test -n "$link_static_flag"; then
-	    dlopen_self=$dlopen_self_static
-	  fi
-	  prefer_static_libs=yes
-	  ;;
-	-static)
-	  if test -z "$pic_flag" && test -n "$link_static_flag"; then
-	    dlopen_self=$dlopen_self_static
-	  fi
-	  prefer_static_libs=built
-	  ;;
-	-static-libtool-libs)
-	  if test -z "$pic_flag" && test -n "$link_static_flag"; then
-	    dlopen_self=$dlopen_self_static
-	  fi
-	  prefer_static_libs=yes
-	  ;;
-	esac
-	build_libtool_libs=no
-	build_old_libs=yes
-	break
-	;;
-      esac
-    done
+If FILE is a libtool library, object or program, all the files associated
+with it are deleted. Otherwise, only FILE itself is deleted using RM."
+        ;;
 
-    # See if our shared archives depend on static archives.
-    test -n "$old_archive_from_new_cmds" && build_old_libs=yes
+      compile)
+      $ECHO \
+"Usage: $progname [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE
 
-    # Go through the arguments, transforming them on the way.
-    while test "$#" -gt 0; do
-      arg="$1"
-      shift
-      case $arg in
-      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
-	qarg=\"`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`\" ### testsuite: skip nested quoting test
-	;;
-      *) qarg=$arg ;;
-      esac
-      libtool_args="$libtool_args $qarg"
+Compile a source file into a libtool library object.
 
-      # If the previous option needs an argument, assign it.
-      if test -n "$prev"; then
-	case $prev in
-	output)
-	  compile_command="$compile_command @OUTPUT@"
-	  finalize_command="$finalize_command @OUTPUT@"
-	  ;;
-	esac
+This mode accepts the following additional options:
 
-	case $prev in
-	dlfiles|dlprefiles)
-	  if test "$preload" = no; then
-	    # Add the symbol object into the linking commands.
-	    compile_command="$compile_command @SYMFILE@"
-	    finalize_command="$finalize_command @SYMFILE@"
-	    preload=yes
-	  fi
-	  case $arg in
-	  *.la | *.lo) ;;  # We handle these cases below.
-	  force)
-	    if test "$dlself" = no; then
-	      dlself=needless
-	      export_dynamic=yes
-	    fi
-	    prev=
-	    continue
-	    ;;
-	  self)
-	    if test "$prev" = dlprefiles; then
-	      dlself=yes
-	    elif test "$prev" = dlfiles && test "$dlopen_self" != yes; then
-	      dlself=yes
-	    else
-	      dlself=needless
-	      export_dynamic=yes
-	    fi
-	    prev=
-	    continue
-	    ;;
-	  *)
-	    if test "$prev" = dlfiles; then
-	      dlfiles="$dlfiles $arg"
-	    else
-	      dlprefiles="$dlprefiles $arg"
-	    fi
-	    prev=
-	    continue
-	    ;;
-	  esac
-	  ;;
-	expsyms)
-	  export_symbols="$arg"
-	  if test ! -f "$arg"; then
-	    $echo "$modename: symbol file \`$arg' does not exist"
-	    exit $EXIT_FAILURE
-	  fi
-	  prev=
-	  continue
-	  ;;
-	expsyms_regex)
-	  export_symbols_regex="$arg"
-	  prev=
-	  continue
-	  ;;
-	inst_prefix)
-	  inst_prefix_dir="$arg"
-	  prev=
-	  continue
-	  ;;
-	precious_regex)
-	  precious_files_regex="$arg"
-	  prev=
-	  continue
-	  ;;
-	release)
-	  release="-$arg"
-	  prev=
-	  continue
-	  ;;
-	objectlist)
-	  if test -f "$arg"; then
-	    save_arg=$arg
-	    moreargs=
-	    for fil in `cat $save_arg`
-	    do
-#	      moreargs="$moreargs $fil"
-	      arg=$fil
-	      # A libtool-controlled object.
+  -o OUTPUT-FILE    set the output file name to OUTPUT-FILE
+  -no-suppress      do not suppress compiler output for multiple passes
+  -prefer-pic       try to building PIC objects only
+  -prefer-non-pic   try to building non-PIC objects only
+  -shared           do not build a \`.o' file suitable for static linking
+  -static           only build a \`.o' file suitable for static linking
 
-	      # Check to see that this really is a libtool object.
-	      if (${SED} -e '2q' $arg | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
-		pic_object=
-		non_pic_object=
+COMPILE-COMMAND is a command to be used in creating a \`standard' object file
+from the given SOURCEFILE.
 
-		# Read the .lo file
-		# If there is no directory component, then add one.
-		case $arg in
-		*/* | *\\*) . $arg ;;
-		*) . ./$arg ;;
-		esac
+The output file name is determined by removing the directory component from
+SOURCEFILE, then substituting the C source code suffix \`.c' with the
+library object suffix, \`.lo'."
+        ;;
 
-		if test -z "$pic_object" || \
-		   test -z "$non_pic_object" ||
-		   test "$pic_object" = none && \
-		   test "$non_pic_object" = none; then
-		  $echo "$modename: cannot find name of object for \`$arg'" 1>&2
-		  exit $EXIT_FAILURE
-		fi
+      execute)
+        $ECHO \
+"Usage: $progname [OPTION]... --mode=execute COMMAND [ARGS]...
 
-		# Extract subdirectory from the argument.
-		xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'`
-		if test "X$xdir" = "X$arg"; then
-		  xdir=
-		else
-		  xdir="$xdir/"
-		fi
+Automatically set library path, then run a program.
 
-		if test "$pic_object" != none; then
-		  # Prepend the subdirectory the object is found in.
-		  pic_object="$xdir$pic_object"
+This mode accepts the following additional options:
 
-		  if test "$prev" = dlfiles; then
-		    if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
-		      dlfiles="$dlfiles $pic_object"
-		      prev=
-		      continue
-		    else
-		      # If libtool objects are unsupported, then we need to preload.
-		      prev=dlprefiles
-		    fi
-		  fi
+  -dlopen FILE      add the directory containing FILE to the library path
 
-		  # CHECK ME:  I think I busted this.  -Ossama
-		  if test "$prev" = dlprefiles; then
-		    # Preload the old-style object.
-		    dlprefiles="$dlprefiles $pic_object"
-		    prev=
-		  fi
+This mode sets the library path environment variable according to \`-dlopen'
+flags.
 
-		  # A PIC object.
-		  libobjs="$libobjs $pic_object"
-		  arg="$pic_object"
-		fi
+If any of the ARGS are libtool executable wrappers, then they are translated
+into their corresponding uninstalled binary, and any of their required library
+directories are added to the library path.
 
-		# Non-PIC object.
-		if test "$non_pic_object" != none; then
-		  # Prepend the subdirectory the object is found in.
-		  non_pic_object="$xdir$non_pic_object"
+Then, COMMAND is executed, with ARGS as arguments."
+        ;;
 
-		  # A standard non-PIC object
-		  non_pic_objects="$non_pic_objects $non_pic_object"
-		  if test -z "$pic_object" || test "$pic_object" = none ; then
-		    arg="$non_pic_object"
-		  fi
-		else
-		  # If the PIC object exists, use it instead.
-		  # $xdir was prepended to $pic_object above.
-		  non_pic_object="$pic_object"
-		  non_pic_objects="$non_pic_objects $non_pic_object"
-		fi
-	      else
-		# Only an error if not doing a dry-run.
-		if test -z "$run"; then
-		  $echo "$modename: \`$arg' is not a valid libtool object" 1>&2
-		  exit $EXIT_FAILURE
-		else
-		  # Dry-run case.
+      finish)
+        $ECHO \
+"Usage: $progname [OPTION]... --mode=finish [LIBDIR]...
 
-		  # Extract subdirectory from the argument.
-		  xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'`
-		  if test "X$xdir" = "X$arg"; then
-		    xdir=
-		  else
-		    xdir="$xdir/"
-		  fi
+Complete the installation of libtool libraries.
 
-		  pic_object=`$echo "X${xdir}${objdir}/${arg}" | $Xsed -e "$lo2o"`
-		  non_pic_object=`$echo "X${xdir}${arg}" | $Xsed -e "$lo2o"`
-		  libobjs="$libobjs $pic_object"
-		  non_pic_objects="$non_pic_objects $non_pic_object"
-		fi
-	      fi
-	    done
-	  else
-	    $echo "$modename: link input file \`$save_arg' does not exist"
-	    exit $EXIT_FAILURE
-	  fi
-	  arg=$save_arg
-	  prev=
-	  continue
-	  ;;
-	rpath | xrpath)
-	  # We need an absolute path.
-	  case $arg in
-	  [\\/]* | [A-Za-z]:[\\/]*) ;;
-	  *)
-	    $echo "$modename: only absolute run-paths are allowed" 1>&2
-	    exit $EXIT_FAILURE
-	    ;;
-	  esac
-	  if test "$prev" = rpath; then
-	    case "$rpath " in
-	    *" $arg "*) ;;
-	    *) rpath="$rpath $arg" ;;
-	    esac
-	  else
-	    case "$xrpath " in
-	    *" $arg "*) ;;
-	    *) xrpath="$xrpath $arg" ;;
-	    esac
-	  fi
-	  prev=
-	  continue
-	  ;;
-	xcompiler)
-	  compiler_flags="$compiler_flags $qarg"
-	  prev=
-	  compile_command="$compile_command $qarg"
-	  finalize_command="$finalize_command $qarg"
-	  continue
-	  ;;
-	xlinker)
-	  linker_flags="$linker_flags $qarg"
-	  compiler_flags="$compiler_flags $wl$qarg"
-	  prev=
-	  compile_command="$compile_command $wl$qarg"
-	  finalize_command="$finalize_command $wl$qarg"
-	  continue
-	  ;;
-	xcclinker)
-	  linker_flags="$linker_flags $qarg"
-	  compiler_flags="$compiler_flags $qarg"
-	  prev=
-	  compile_command="$compile_command $qarg"
-	  finalize_command="$finalize_command $qarg"
-	  continue
-	  ;;
-	shrext)
-  	  shrext_cmds="$arg"
-	  prev=
-	  continue
-	  ;;
-	darwin_framework|darwin_framework_skip)
-	  test "$prev" = "darwin_framework" && compiler_flags="$compiler_flags $arg"
-	  compile_command="$compile_command $arg"
-	  finalize_command="$finalize_command $arg"
-	  prev=
-	  continue
-	  ;;
-	*)
-	  eval "$prev=\"\$arg\""
-	  prev=
-	  continue
-	  ;;
-	esac
-      fi # test -n "$prev"
-
-      prevarg="$arg"
-
-      case $arg in
-      -all-static)
-	if test -n "$link_static_flag"; then
-	  compile_command="$compile_command $link_static_flag"
-	  finalize_command="$finalize_command $link_static_flag"
-	fi
-	continue
-	;;
+Each LIBDIR is a directory that contains libtool libraries.
 
-      -allow-undefined)
-	# FIXME: remove this flag sometime in the future.
-	$echo "$modename: \`-allow-undefined' is deprecated because it is the default" 1>&2
-	continue
-	;;
+The commands that this mode executes may require superuser privileges.  Use
+the \`--dry-run' option if you just want to see what would be executed."
+        ;;
 
-      -avoid-version)
-	avoid_version=yes
-	continue
-	;;
+      install)
+        $ECHO \
+"Usage: $progname [OPTION]... --mode=install INSTALL-COMMAND...
 
-      -dlopen)
-	prev=dlfiles
-	continue
-	;;
+Install executables or libraries.
 
-      -dlpreopen)
-	prev=dlprefiles
-	continue
-	;;
+INSTALL-COMMAND is the installation command.  The first component should be
+either the \`install' or \`cp' program.
 
-      -export-dynamic)
-	export_dynamic=yes
-	continue
-	;;
+The following components of INSTALL-COMMAND are treated specially:
 
-      -export-symbols | -export-symbols-regex)
-	if test -n "$export_symbols" || test -n "$export_symbols_regex"; then
-	  $echo "$modename: more than one -exported-symbols argument is not allowed"
-	  exit $EXIT_FAILURE
-	fi
-	if test "X$arg" = "X-export-symbols"; then
-	  prev=expsyms
-	else
-	  prev=expsyms_regex
-	fi
-	continue
-	;;
+  -inst-prefix PREFIX-DIR  Use PREFIX-DIR as a staging area for installation
 
-      -framework|-arch|-isysroot)
-	case " $CC " in
-	  *" ${arg} ${1} "* | *" ${arg}	${1} "*) 
-		prev=darwin_framework_skip ;;
-	  *) compiler_flags="$compiler_flags $arg"
-	     prev=darwin_framework ;;
-	esac
-	compile_command="$compile_command $arg"
-	finalize_command="$finalize_command $arg"
-	continue
-	;;
+The rest of the components are interpreted as arguments to that command (only
+BSD-compatible install options are recognized)."
+        ;;
 
-      -inst-prefix-dir)
-	prev=inst_prefix
-	continue
-	;;
+      link)
+        $ECHO \
+"Usage: $progname [OPTION]... --mode=link LINK-COMMAND...
 
-      # The native IRIX linker understands -LANG:*, -LIST:* and -LNO:*
-      # so, if we see these flags be careful not to treat them like -L
-      -L[A-Z][A-Z]*:*)
-	case $with_gcc/$host in
-	no/*-*-irix* | /*-*-irix*)
-	  compile_command="$compile_command $arg"
-	  finalize_command="$finalize_command $arg"
-	  ;;
-	esac
-	continue
-	;;
+Link object files or libraries together to form another library, or to
+create an executable program.
 
-      -L*)
-	dir=`$echo "X$arg" | $Xsed -e 's/^-L//'`
-	# We need an absolute path.
-	case $dir in
-	[\\/]* | [A-Za-z]:[\\/]*) ;;
-	*)
-	  absdir=`cd "$dir" && pwd`
-	  if test -z "$absdir"; then
-	    $echo "$modename: cannot determine absolute directory name of \`$dir'" 1>&2
-	    absdir="$dir"
-	    notinst_path="$notinst_path $dir"
-	  fi
-	  dir="$absdir"
-	  ;;
-	esac
-	case "$deplibs " in
-	*" -L$dir "*) ;;
-	*)
-	  deplibs="$deplibs -L$dir"
-	  lib_search_path="$lib_search_path $dir"
-	  ;;
-	esac
-	case $host in
-	*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
-	  testbindir=`$echo "X$dir" | $Xsed -e 's*/lib$*/bin*'`
-	  case :$dllsearchpath: in
-	  *":$dir:"*) ;;
-	  *) dllsearchpath="$dllsearchpath:$dir";;
-	  esac
-	  case :$dllsearchpath: in
-	  *":$testbindir:"*) ;;
-	  *) dllsearchpath="$dllsearchpath:$testbindir";;
-	  esac
-	  ;;
-	esac
-	continue
-	;;
+LINK-COMMAND is a command using the C compiler that you would use to create
+a program from several object files.
 
-      -l*)
-	if test "X$arg" = "X-lc" || test "X$arg" = "X-lm"; then
-	  case $host in
-	  *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos*)
-	    # These systems don't actually have a C or math library (as such)
-	    continue
-	    ;;
-	  *-*-os2*)
-	    # These systems don't actually have a C library (as such)
-	    test "X$arg" = "X-lc" && continue
-	    ;;
-	  *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
-	    # Do not include libc due to us having libc/libc_r.
-	    test "X$arg" = "X-lc" && continue
-	    ;;
-	  *-*-rhapsody* | *-*-darwin1.[012])
-	    # Rhapsody C and math libraries are in the System framework
-	    deplibs="$deplibs -framework System"
-	    continue
-	    ;;
-	  *-*-sco3.2v5* | *-*-sco5v6*)
-	    # Causes problems with __ctype
-	    test "X$arg" = "X-lc" && continue
-	    ;;
-	  *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*)
-	    # Compiler inserts libc in the correct place for threads to work
-	    test "X$arg" = "X-lc" && continue
-	    ;;
-	  esac
-	elif test "X$arg" = "X-lc_r"; then
-	 case $host in
-	 *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
-	   # Do not include libc_r directly, use -pthread flag.
-	   continue
-	   ;;
-	 esac
-	fi
-	deplibs="$deplibs $arg"
-	continue
-	;;
+The following components of LINK-COMMAND are treated specially:
 
-      # Tru64 UNIX uses -model [arg] to determine the layout of C++
-      # classes, name mangling, and exception handling.
-      -model)
-	compile_command="$compile_command $arg"
-	compiler_flags="$compiler_flags $arg"
-	finalize_command="$finalize_command $arg"
-	prev=xcompiler
-	continue
-	;;
+  -all-static       do not do any dynamic linking at all
+  -avoid-version    do not add a version suffix if possible
+  -dlopen FILE      \`-dlpreopen' FILE if it cannot be dlopened at runtime
+  -dlpreopen FILE   link in FILE and add its symbols to lt_preloaded_symbols
+  -export-dynamic   allow symbols from OUTPUT-FILE to be resolved with dlsym(3)
+  -export-symbols SYMFILE
+                    try to export only the symbols listed in SYMFILE
+  -export-symbols-regex REGEX
+                    try to export only the symbols matching REGEX
+  -LLIBDIR          search LIBDIR for required installed libraries
+  -lNAME            OUTPUT-FILE requires the installed library libNAME
+  -module           build a library that can dlopened
+  -no-fast-install  disable the fast-install mode
+  -no-install       link a not-installable executable
+  -no-undefined     declare that a library does not refer to external symbols
+  -o OUTPUT-FILE    create OUTPUT-FILE from the specified objects
+  -objectlist FILE  Use a list of object files found in FILE to specify objects
+  -precious-files-regex REGEX
+                    don't remove output files matching REGEX
+  -release RELEASE  specify package release information
+  -rpath LIBDIR     the created library will eventually be installed in LIBDIR
+  -R[ ]LIBDIR       add LIBDIR to the runtime path of programs and libraries
+  -shared           only do dynamic linking of libtool libraries
+  -shrext SUFFIX    override the standard shared library file extension
+  -static           do not do any dynamic linking of uninstalled libtool libraries
+  -static-libtool-libs
+                    do not do any dynamic linking of libtool libraries
+  -version-info CURRENT[:REVISION[:AGE]]
+                    specify library version info [each variable defaults to 0]
+  -weak LIBNAME     declare that the target provides the LIBNAME interface
 
-     -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe|-threads)
-	compiler_flags="$compiler_flags $arg"
-	compile_command="$compile_command $arg"
-	finalize_command="$finalize_command $arg"
-	continue
-	;;
+All other options (arguments beginning with \`-') are ignored.
 
-      -multi_module)
-	single_module="${wl}-multi_module"
-	continue
-	;;
+Every other argument is treated as a filename.  Files ending in \`.la' are
+treated as uninstalled libtool libraries, other files are standard or library
+object files.
 
-      -module)
-	module=yes
-	continue
-	;;
+If the OUTPUT-FILE ends in \`.la', then a libtool library is created,
+only library objects (\`.lo' files) may be specified, and \`-rpath' is
+required, except when creating a convenience library.
 
-      # -64, -mips[0-9] enable 64-bit mode on the SGI compiler
-      # -r[0-9][0-9]* specifies the processor on the SGI compiler
-      # -xarch=*, -xtarget=* enable 64-bit mode on the Sun compiler
-      # +DA*, +DD* enable 64-bit mode on the HP compiler
-      # -q* pass through compiler args for the IBM compiler
-      # -m* pass through architecture-specific compiler args for GCC
-      # -m*, -t[45]*, -txscale* pass through architecture-specific
-      # compiler args for GCC
-      # -p, -pg, --coverage, -fprofile-* pass through profiling flag for GCC
-      # -F/path gives path to uninstalled frameworks, gcc on darwin
-      # @file GCC response files
-      -64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*| \
-      -t[45]*|-txscale*|-p|-pg|--coverage|-fprofile-*|-F*|@*)
+If OUTPUT-FILE ends in \`.a' or \`.lib', then a standard library is created
+using \`ar' and \`ranlib', or on Windows using \`lib'.
 
-	# Unknown arguments in both finalize_command and compile_command need
-	# to be aesthetically quoted because they are evaled later.
-	arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
-	case $arg in
-	*[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
-	  arg="\"$arg\""
-	  ;;
-	esac
-        compile_command="$compile_command $arg"
-        finalize_command="$finalize_command $arg"
-        compiler_flags="$compiler_flags $arg"
-        continue
+If OUTPUT-FILE ends in \`.lo' or \`.${objext}', then a reloadable object file
+is created, otherwise an executable program is created."
         ;;
 
-      -shrext)
-	prev=shrext
-	continue
-	;;
+      uninstall)
+        $ECHO \
+"Usage: $progname [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE...
 
-      -no-fast-install)
-	fast_install=no
-	continue
-	;;
+Remove libraries from an installation directory.
 
-      -no-install)
-	case $host in
-	*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-darwin*)
-	  # The PATH hackery in wrapper scripts is required on Windows
-	  # and Darwin in order for the loader to find any dlls it needs.
-	  $echo "$modename: warning: \`-no-install' is ignored for $host" 1>&2
-	  $echo "$modename: warning: assuming \`-no-fast-install' instead" 1>&2
-	  fast_install=no
-	  ;;
-	*) no_install=yes ;;
-	esac
-	continue
-	;;
+RM is the name of the program to use to delete files associated with each FILE
+(typically \`/bin/rm').  RM-OPTIONS are options (such as \`-f') to be passed
+to RM.
 
-      -no-undefined)
-	allow_undefined=no
-	continue
-	;;
+If FILE is a libtool library, all the files associated with it are deleted.
+Otherwise, only FILE itself is deleted using RM."
+        ;;
 
-      -objectlist)
-	prev=objectlist
-	continue
-	;;
+      *)
+        func_fatal_help "invalid operation mode \`$mode'"
+        ;;
+    esac
 
-      -o) prev=output ;;
+    $ECHO
+    $ECHO "Try \`$progname --help' for more information about other modes."
 
-      -precious-files-regex)
-	prev=precious_regex
-	continue
-	;;
-
-      -release)
-	prev=release
-	continue
-	;;
+    exit $?
+}
 
-      -rpath)
-	prev=rpath
-	continue
-	;;
+  # Now that we've collected a possible --mode arg, show help if necessary
+  $opt_help && func_mode_help
 
-      -R)
-	prev=xrpath
-	continue
-	;;
 
-      -R*)
-	dir=`$echo "X$arg" | $Xsed -e 's/^-R//'`
-	# We need an absolute path.
-	case $dir in
-	[\\/]* | [A-Za-z]:[\\/]*) ;;
-	*)
-	  $echo "$modename: only absolute run-paths are allowed" 1>&2
-	  exit $EXIT_FAILURE
-	  ;;
-	esac
-	case "$xrpath " in
-	*" $dir "*) ;;
-	*) xrpath="$xrpath $dir" ;;
-	esac
-	continue
-	;;
+# func_mode_execute arg...
+func_mode_execute ()
+{
+    $opt_debug
+    # The first argument is the command name.
+    cmd="$nonopt"
+    test -z "$cmd" && \
+      func_fatal_help "you must specify a COMMAND"
 
-      -static | -static-libtool-libs)
-	# The effects of -static are defined in a previous loop.
-	# We used to do the same as -all-static on platforms that
-	# didn't have a PIC flag, but the assumption that the effects
-	# would be equivalent was wrong.  It would break on at least
-	# Digital Unix and AIX.
-	continue
-	;;
+    # Handle -dlopen flags immediately.
+    for file in $execute_dlfiles; do
+      test -f "$file" \
+	|| func_fatal_help "\`$file' is not a file"
 
-      -thread-safe)
-	thread_safe=yes
-	continue
-	;;
+      dir=
+      case $file in
+      *.la)
+	# Check to see that this really is a libtool archive.
+	func_lalib_unsafe_p "$file" \
+	  || func_fatal_help "\`$lib' is not a valid libtool archive"
 
-      -version-info)
-	prev=vinfo
-	continue
-	;;
-      -version-number)
-	prev=vinfo
-	vinfo_number=yes
-	continue
-	;;
+	# Read the libtool library.
+	dlname=
+	library_names=
+	func_source "$file"
 
-      -Wc,*)
-	args=`$echo "X$arg" | $Xsed -e "$sed_quote_subst" -e 's/^-Wc,//'`
-	arg=
-	save_ifs="$IFS"; IFS=','
-	for flag in $args; do
-	  IFS="$save_ifs"
-	  case $flag in
-	    *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
-	    flag="\"$flag\""
-	    ;;
-	  esac
-	  arg="$arg $wl$flag"
-	  compiler_flags="$compiler_flags $flag"
-	done
-	IFS="$save_ifs"
-	arg=`$echo "X$arg" | $Xsed -e "s/^ //"`
-	;;
+	# Skip this library if it cannot be dlopened.
+	if test -z "$dlname"; then
+	  # Warn if it was a shared library.
+	  test -n "$library_names" && \
+	    func_warning "\`$file' was not linked with \`-export-dynamic'"
+	  continue
+	fi
 
-      -Wl,*)
-	args=`$echo "X$arg" | $Xsed -e "$sed_quote_subst" -e 's/^-Wl,//'`
-	arg=
-	save_ifs="$IFS"; IFS=','
-	for flag in $args; do
-	  IFS="$save_ifs"
-	  case $flag in
-	    *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
-	    flag="\"$flag\""
-	    ;;
-	  esac
-	  arg="$arg $wl$flag"
-	  compiler_flags="$compiler_flags $wl$flag"
-	  linker_flags="$linker_flags $flag"
-	done
-	IFS="$save_ifs"
-	arg=`$echo "X$arg" | $Xsed -e "s/^ //"`
-	;;
+	func_dirname "$file" "" "."
+	dir="$func_dirname_result"
 
-      -Xcompiler)
-	prev=xcompiler
-	continue
+	if test -f "$dir/$objdir/$dlname"; then
+	  dir="$dir/$objdir"
+	else
+	  if test ! -f "$dir/$dlname"; then
+	    func_fatal_error "cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'"
+	  fi
+	fi
 	;;
 
-      -Xlinker)
-	prev=xlinker
-	continue
+      *.lo)
+	# Just add the directory containing the .lo file.
+	func_dirname "$file" "" "."
+	dir="$func_dirname_result"
 	;;
 
-      -XCClinker)
-	prev=xcclinker
+      *)
+	func_warning "\`-dlopen' is ignored for non-libtool libraries and objects"
 	continue
 	;;
+      esac
 
-      # Some other compiler flag.
-      -* | +*)
-	# Unknown arguments in both finalize_command and compile_command need
-	# to be aesthetically quoted because they are evaled later.
-	arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
-	case $arg in
-	*[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
-	  arg="\"$arg\""
-	  ;;
-	esac
-	;;
-
-      *.$objext)
-	# A standard object.
-	objs="$objs $arg"
-	;;
-
-      *.lo)
-	# A libtool-controlled object.
-
-	# Check to see that this really is a libtool object.
-	if (${SED} -e '2q' $arg | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
-	  pic_object=
-	  non_pic_object=
+      # Get the absolute pathname.
+      absdir=`cd "$dir" && pwd`
+      test -n "$absdir" && dir="$absdir"
 
-	  # Read the .lo file
-	  # If there is no directory component, then add one.
-	  case $arg in
-	  */* | *\\*) . $arg ;;
-	  *) . ./$arg ;;
-	  esac
+      # Now add the directory to shlibpath_var.
+      if eval "test -z \"\$$shlibpath_var\""; then
+	eval "$shlibpath_var=\"\$dir\""
+      else
+	eval "$shlibpath_var=\"\$dir:\$$shlibpath_var\""
+      fi
+    done
 
-	  if test -z "$pic_object" || \
-	     test -z "$non_pic_object" ||
-	     test "$pic_object" = none && \
-	     test "$non_pic_object" = none; then
-	    $echo "$modename: cannot find name of object for \`$arg'" 1>&2
-	    exit $EXIT_FAILURE
-	  fi
+    # This variable tells wrapper scripts just to set shlibpath_var
+    # rather than running their programs.
+    libtool_execute_magic="$magic"
 
-	  # Extract subdirectory from the argument.
-	  xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'`
-	  if test "X$xdir" = "X$arg"; then
-	    xdir=
- 	  else
-	    xdir="$xdir/"
-	  fi
+    # Check if any of the arguments is a wrapper script.
+    args=
+    for file
+    do
+      case $file in
+      -*) ;;
+      *)
+	# Do a test to see if this is really a libtool program.
+	if func_ltwrapper_script_p "$file"; then
+	  func_source "$file"
+	  # Transform arg to wrapped name.
+	  file="$progdir/$program"
+	elif func_ltwrapper_executable_p "$file"; then
+	  func_ltwrapper_scriptname "$file"
+	  func_source "$func_ltwrapper_scriptname_result"
+	  # Transform arg to wrapped name.
+	  file="$progdir/$program"
+	fi
+	;;
+      esac
+      # Quote arguments (to preserve shell metacharacters).
+      func_quote_for_eval "$file"
+      args="$args $func_quote_for_eval_result"
+    done
 
-	  if test "$pic_object" != none; then
-	    # Prepend the subdirectory the object is found in.
-	    pic_object="$xdir$pic_object"
+    if test "X$opt_dry_run" = Xfalse; then
+      if test -n "$shlibpath_var"; then
+	# Export the shlibpath_var.
+	eval "export $shlibpath_var"
+      fi
 
-	    if test "$prev" = dlfiles; then
-	      if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
-		dlfiles="$dlfiles $pic_object"
-		prev=
-		continue
+      # Restore saved environment variables
+      for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
+      do
+	eval "if test \"\${save_$lt_var+set}\" = set; then
+                $lt_var=\$save_$lt_var; export $lt_var
 	      else
-		# If libtool objects are unsupported, then we need to preload.
-		prev=dlprefiles
-	      fi
-	    fi
+		$lt_unset $lt_var
+	      fi"
+      done
 
-	    # CHECK ME:  I think I busted this.  -Ossama
-	    if test "$prev" = dlprefiles; then
-	      # Preload the old-style object.
-	      dlprefiles="$dlprefiles $pic_object"
-	      prev=
-	    fi
+      # Now prepare to actually exec the command.
+      exec_cmd="\$cmd$args"
+    else
+      # Display what would be done.
+      if test -n "$shlibpath_var"; then
+	eval "\$ECHO \"\$shlibpath_var=\$$shlibpath_var\""
+	$ECHO "export $shlibpath_var"
+      fi
+      $ECHO "$cmd$args"
+      exit $EXIT_SUCCESS
+    fi
+}
 
-	    # A PIC object.
-	    libobjs="$libobjs $pic_object"
-	    arg="$pic_object"
-	  fi
+test "$mode" = execute && func_mode_execute ${1+"$@"}
 
-	  # Non-PIC object.
-	  if test "$non_pic_object" != none; then
-	    # Prepend the subdirectory the object is found in.
-	    non_pic_object="$xdir$non_pic_object"
 
-	    # A standard non-PIC object
-	    non_pic_objects="$non_pic_objects $non_pic_object"
-	    if test -z "$pic_object" || test "$pic_object" = none ; then
-	      arg="$non_pic_object"
-	    fi
-	  else
-	    # If the PIC object exists, use it instead.
-	    # $xdir was prepended to $pic_object above.
-	    non_pic_object="$pic_object"
-	    non_pic_objects="$non_pic_objects $non_pic_object"
-	  fi
-	else
-	  # Only an error if not doing a dry-run.
-	  if test -z "$run"; then
-	    $echo "$modename: \`$arg' is not a valid libtool object" 1>&2
-	    exit $EXIT_FAILURE
-	  else
-	    # Dry-run case.
+# func_mode_finish arg...
+func_mode_finish ()
+{
+    $opt_debug
+    libdirs="$nonopt"
+    admincmds=
 
-	    # Extract subdirectory from the argument.
-	    xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'`
-	    if test "X$xdir" = "X$arg"; then
-	      xdir=
-	    else
-	      xdir="$xdir/"
-	    fi
+    if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then
+      for dir
+      do
+	libdirs="$libdirs $dir"
+      done
 
-	    pic_object=`$echo "X${xdir}${objdir}/${arg}" | $Xsed -e "$lo2o"`
-	    non_pic_object=`$echo "X${xdir}${arg}" | $Xsed -e "$lo2o"`
-	    libobjs="$libobjs $pic_object"
-	    non_pic_objects="$non_pic_objects $non_pic_object"
-	  fi
+      for libdir in $libdirs; do
+	if test -n "$finish_cmds"; then
+	  # Do each command in the finish commands.
+	  func_execute_cmds "$finish_cmds" 'admincmds="$admincmds
+'"$cmd"'"'
 	fi
-	;;
-
-      *.$libext)
-	# An archive.
-	deplibs="$deplibs $arg"
-	old_deplibs="$old_deplibs $arg"
-	continue
-	;;
+	if test -n "$finish_eval"; then
+	  # Do the single finish_eval.
+	  eval cmds=\"$finish_eval\"
+	  $opt_dry_run || eval "$cmds" || admincmds="$admincmds
+       $cmds"
+	fi
+      done
+    fi
 
-      *.la)
-	# A libtool-controlled library.
+    # Exit here if they wanted silent mode.
+    $opt_silent && exit $EXIT_SUCCESS
 
-	if test "$prev" = dlfiles; then
-	  # This library was specified with -dlopen.
-	  dlfiles="$dlfiles $arg"
-	  prev=
-	elif test "$prev" = dlprefiles; then
-	  # The library was specified with -dlpreopen.
-	  dlprefiles="$dlprefiles $arg"
-	  prev=
-	else
-	  deplibs="$deplibs $arg"
-	fi
-	continue
-	;;
+    $ECHO "X----------------------------------------------------------------------" | $Xsed
+    $ECHO "Libraries have been installed in:"
+    for libdir in $libdirs; do
+      $ECHO "   $libdir"
+    done
+    $ECHO
+    $ECHO "If you ever happen to want to link against installed libraries"
+    $ECHO "in a given directory, LIBDIR, you must either use libtool, and"
+    $ECHO "specify the full pathname of the library, or use the \`-LLIBDIR'"
+    $ECHO "flag during linking and do at least one of the following:"
+    if test -n "$shlibpath_var"; then
+      $ECHO "   - add LIBDIR to the \`$shlibpath_var' environment variable"
+      $ECHO "     during execution"
+    fi
+    if test -n "$runpath_var"; then
+      $ECHO "   - add LIBDIR to the \`$runpath_var' environment variable"
+      $ECHO "     during linking"
+    fi
+    if test -n "$hardcode_libdir_flag_spec"; then
+      libdir=LIBDIR
+      eval flag=\"$hardcode_libdir_flag_spec\"
 
-      # Some other compiler argument.
-      *)
-	# Unknown arguments in both finalize_command and compile_command need
-	# to be aesthetically quoted because they are evaled later.
-	arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
-	case $arg in
-	*[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
-	  arg="\"$arg\""
-	  ;;
-	esac
+      $ECHO "   - use the \`$flag' linker flag"
+    fi
+    if test -n "$admincmds"; then
+      $ECHO "   - have your system administrator run these commands:$admincmds"
+    fi
+    if test -f /etc/ld.so.conf; then
+      $ECHO "   - have your system administrator add LIBDIR to \`/etc/ld.so.conf'"
+    fi
+    $ECHO
+
+    $ECHO "See any operating system documentation about shared libraries for"
+    case $host in
+      solaris2.[6789]|solaris2.1[0-9])
+        $ECHO "more information, such as the ld(1), crle(1) and ld.so(8) manual"
+	$ECHO "pages."
 	;;
-      esac # arg
+      *)
+        $ECHO "more information, such as the ld(1) and ld.so(8) manual pages."
+        ;;
+    esac
+    $ECHO "X----------------------------------------------------------------------" | $Xsed
+    exit $EXIT_SUCCESS
+}
 
-      # Now actually substitute the argument into the commands.
-      if test -n "$arg"; then
-	compile_command="$compile_command $arg"
-	finalize_command="$finalize_command $arg"
-      fi
-    done # argument parsing loop
+test "$mode" = finish && func_mode_finish ${1+"$@"}
 
-    if test "$module" = yes ; then
-	# [Mandriva] dropping ld option "--no-undefined" which is wrong for plugins
-    	linker_flags=`$echo "X $linker_flags" | $Xsed -e 's/ --no-undefined//'`
-    	compiler_flags=`$echo "X $compiler_flags" | $Xsed -e 's/ -Wl,--no-undefined//'`
-    fi
 
-    if test -n "$prev"; then
-      $echo "$modename: the \`$prevarg' option requires an argument" 1>&2
-      $echo "$help" 1>&2
-      exit $EXIT_FAILURE
+# func_mode_install arg...
+func_mode_install ()
+{
+    $opt_debug
+    # There may be an optional sh(1) argument at the beginning of
+    # install_prog (especially on Windows NT).
+    if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh ||
+       # Allow the use of GNU shtool's install command.
+       $ECHO "X$nonopt" | $GREP shtool >/dev/null; then
+      # Aesthetically quote it.
+      func_quote_for_eval "$nonopt"
+      install_prog="$func_quote_for_eval_result "
+      arg=$1
+      shift
+    else
+      install_prog=
+      arg=$nonopt
     fi
 
-    if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then
-      eval arg=\"$export_dynamic_flag_spec\"
-      compile_command="$compile_command $arg"
-      finalize_command="$finalize_command $arg"
-    fi
+    # The real first argument should be the name of the installation program.
+    # Aesthetically quote it.
+    func_quote_for_eval "$arg"
+    install_prog="$install_prog$func_quote_for_eval_result"
 
-    oldlibs=
-    # calculate the name of the file, without its directory
-    outputname=`$echo "X$output" | $Xsed -e 's%^.*/%%'`
-    libobjs_save="$libobjs"
+    # We need to accept at least all the BSD install flags.
+    dest=
+    files=
+    opts=
+    prev=
+    install_type=
+    isdir=no
+    stripme=
+    for arg
+    do
+      if test -n "$dest"; then
+	files="$files $dest"
+	dest=$arg
+	continue
+      fi
 
-    if test -n "$shlibpath_var"; then
-      # get the directories listed in $shlibpath_var
-      eval shlib_search_path=\`\$echo \"X\${$shlibpath_var}\" \| \$Xsed -e \'s/:/ /g\'\`
-    else
-      shlib_search_path=
-    fi
-    eval sys_lib_search_path=\"$sys_lib_search_path_spec\"
-    eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\"
+      case $arg in
+      -d) isdir=yes ;;
+      -f)
+	case " $install_prog " in
+	*[\\\ /]cp\ *) ;;
+	*) prev=$arg ;;
+	esac
+	;;
+      -g | -m | -o)
+	prev=$arg
+	;;
+      -s)
+	stripme=" -s"
+	continue
+	;;
+      -*)
+	;;
+      *)
+	# If the previous option needed an argument, then skip it.
+	if test -n "$prev"; then
+	  prev=
+	else
+	  dest=$arg
+	  continue
+	fi
+	;;
+      esac
 
-    output_objdir=`$echo "X$output" | $Xsed -e 's%/[^/]*$%%'`
-    if test "X$output_objdir" = "X$output"; then
-      output_objdir="$objdir"
-    else
-      output_objdir="$output_objdir/$objdir"
-    fi
-    # Create the object directory.
-    if test ! -d "$output_objdir"; then
-      $show "$mkdir $output_objdir"
-      $run $mkdir $output_objdir
-      exit_status=$?
-      if test "$exit_status" -ne 0 && test ! -d "$output_objdir"; then
-	exit $exit_status
+      # Aesthetically quote the argument.
+      func_quote_for_eval "$arg"
+      install_prog="$install_prog $func_quote_for_eval_result"
+    done
+
+    test -z "$install_prog" && \
+      func_fatal_help "you must specify an install program"
+
+    test -n "$prev" && \
+      func_fatal_help "the \`$prev' option requires an argument"
+
+    if test -z "$files"; then
+      if test -z "$dest"; then
+	func_fatal_help "no file or destination specified"
+      else
+	func_fatal_help "you must specify a destination"
       fi
     fi
 
-    # Determine the type of output
-    case $output in
-    "")
-      $echo "$modename: you must specify an output file" 1>&2
-      $echo "$help" 1>&2
-      exit $EXIT_FAILURE
-      ;;
-    *.$libext) linkmode=oldlib ;;
-    *.lo | *.$objext) linkmode=obj ;;
-    *.la) linkmode=lib ;;
-    *) linkmode=prog ;; # Anything else should be a program.
-    esac
+    # Strip any trailing slash from the destination.
+    func_stripname '' '/' "$dest"
+    dest=$func_stripname_result
 
-    case $host in
-    *cygwin* | *mingw* | *pw32*)
-      # don't eliminate duplications in $postdeps and $predeps
-      duplicate_compiler_generated_deps=yes
-      ;;
+    # Check to see that the destination is a directory.
+    test -d "$dest" && isdir=yes
+    if test "$isdir" = yes; then
+      destdir="$dest"
+      destname=
+    else
+      func_dirname_and_basename "$dest" "" "."
+      destdir="$func_dirname_result"
+      destname="$func_basename_result"
+
+      # Not a directory, so check to see that there is only one file specified.
+      set dummy $files; shift
+      test "$#" -gt 1 && \
+	func_fatal_help "\`$dest' is not a directory"
+    fi
+    case $destdir in
+    [\\/]* | [A-Za-z]:[\\/]*) ;;
     *)
-      duplicate_compiler_generated_deps=$duplicate_deps
+      for file in $files; do
+	case $file in
+	*.lo) ;;
+	*)
+	  func_fatal_help "\`$destdir' must be an absolute directory name"
+	  ;;
+	esac
+      done
       ;;
     esac
-    specialdeplibs=
 
-    libs=
-    # Find all interdependent deplibs by searching for libraries
-    # that are linked more than once (e.g. -la -lb -la)
-    for deplib in $deplibs; do
-      if test "X$duplicate_deps" = "Xyes" ; then
-	case "$libs " in
-	*" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
-	esac
-      fi
-      libs="$libs $deplib"
-    done
+    # This variable tells wrapper scripts just to set variables rather
+    # than running their programs.
+    libtool_install_magic="$magic"
 
-    if test "$linkmode" = lib; then
-      libs="$predeps $libs $compiler_lib_search_path $postdeps"
+    staticlibs=
+    future_libdirs=
+    current_libdirs=
+    for file in $files; do
 
-      # Compute libraries that are listed more than once in $predeps
-      # $postdeps and mark them as special (i.e., whose duplicates are
-      # not to be eliminated).
-      pre_post_deps=
-      if test "X$duplicate_compiler_generated_deps" = "Xyes" ; then
-	for pre_post_dep in $predeps $postdeps; do
-	  case "$pre_post_deps " in
-	  *" $pre_post_dep "*) specialdeplibs="$specialdeplibs $pre_post_deps" ;;
+      # Do each installation.
+      case $file in
+      *.$libext)
+	# Do the static libraries later.
+	staticlibs="$staticlibs $file"
+	;;
+
+      *.la)
+	# Check to see that this really is a libtool archive.
+	func_lalib_unsafe_p "$file" \
+	  || func_fatal_help "\`$file' is not a valid libtool archive"
+
+	library_names=
+	old_library=
+	relink_command=
+	func_source "$file"
+
+	# Add the libdir to current_libdirs if it is the destination.
+	if test "X$destdir" = "X$libdir"; then
+	  case "$current_libdirs " in
+	  *" $libdir "*) ;;
+	  *) current_libdirs="$current_libdirs $libdir" ;;
 	  esac
-	  pre_post_deps="$pre_post_deps $pre_post_dep"
-	done
-      fi
-      pre_post_deps=
-    fi
+	else
+	  # Note the libdir as a future libdir.
+	  case "$future_libdirs " in
+	  *" $libdir "*) ;;
+	  *) future_libdirs="$future_libdirs $libdir" ;;
+	  esac
+	fi
 
-    deplibs=
-    newdependency_libs=
-    newlib_search_path=
-    need_relink=no # whether we're linking any uninstalled libtool libraries
-    notinst_deplibs= # not-installed libtool libraries
-    case $linkmode in
-    lib)
-	passes="conv link"
-	for file in $dlfiles $dlprefiles; do
-	  case $file in
-	  *.la) ;;
-	  *)
-	    $echo "$modename: libraries can \`-dlopen' only libtool libraries: $file" 1>&2
-	    exit $EXIT_FAILURE
+	func_dirname "$file" "/" ""
+	dir="$func_dirname_result"
+	dir="$dir$objdir"
+
+	if test -n "$relink_command"; then
+	  # Determine the prefix the user has applied to our future dir.
+	  inst_prefix_dir=`$ECHO "X$destdir" | $Xsed -e "s%$libdir\$%%"`
+
+	  # Don't allow the user to place us outside of our expected
+	  # location b/c this prevents finding dependent libraries that
+	  # are installed to the same prefix.
+	  # At present, this check doesn't affect windows .dll's that
+	  # are installed into $libdir/../bin (currently, that works fine)
+	  # but it's something to keep an eye on.
+	  test "$inst_prefix_dir" = "$destdir" && \
+	    func_fatal_error "error: cannot install \`$file' to a directory not ending in $libdir"
+
+	  if test -n "$inst_prefix_dir"; then
+	    # Stick the inst_prefix_dir data into the link command.
+	    relink_command=`$ECHO "X$relink_command" | $Xsed -e "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"`
+	  else
+	    relink_command=`$ECHO "X$relink_command" | $Xsed -e "s%@inst_prefix_dir@%%"`
+	  fi
+
+	  func_warning "relinking \`$file'"
+	  func_show_eval "$relink_command" \
+	    'func_fatal_error "error: relink \`$file'\'' with the above command before installing it"'
+	fi
+
+	# See the names of the shared library.
+	set dummy $library_names; shift
+	if test -n "$1"; then
+	  realname="$1"
+	  shift
+
+	  srcname="$realname"
+	  test -n "$relink_command" && srcname="$realname"T
+
+	  # Install the shared library and build the symlinks.
+	  func_show_eval "$install_prog $dir/$srcname $destdir/$realname" \
+	      'exit $?'
+	  tstripme="$stripme"
+	  case $host_os in
+	  cygwin* | mingw* | pw32* | cegcc*)
+	    case $realname in
+	    *.dll.a)
+	      tstripme=""
+	      ;;
+	    esac
 	    ;;
 	  esac
-	done
-	;;
-    prog)
-	compile_deplibs=
-	finalize_deplibs=
-	alldeplibs=no
-	newdlfiles=
-	newdlprefiles=
-	passes="conv scan dlopen dlpreopen link"
-	;;
-    *)  passes="conv"
-	;;
-    esac
-    for pass in $passes; do
-      if test "$linkmode,$pass" = "lib,link" ||
-	 test "$linkmode,$pass" = "prog,scan"; then
-	libs="$deplibs"
-	deplibs=
-      fi
-      if test "$linkmode" = prog; then
-	case $pass in
-	dlopen) libs="$dlfiles" ;;
-	dlpreopen) libs="$dlprefiles" ;;
-	link)
-	  libs="$deplibs %DEPLIBS%"
-	  test "X$link_all_deplibs" != Xno && libs="$libs $dependency_libs"
-	  ;;
-	esac
-      fi
-      if test "$pass" = dlopen; then
-	# Collect dlpreopened libraries
-	save_deplibs="$deplibs"
-	deplibs=
-      fi
-      for deplib in $libs; do
-	lib=
-	found=no
-	case $deplib in
-	-mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe|-threads)
-	  if test "$linkmode,$pass" = "prog,link"; then
-	    compile_deplibs="$deplib $compile_deplibs"
-	    finalize_deplibs="$deplib $finalize_deplibs"
-	  else
-	    compiler_flags="$compiler_flags $deplib"
-	  fi
-	  continue
-	  ;;
-	-l*)
-	  if test "$linkmode" != lib && test "$linkmode" != prog; then
-	    $echo "$modename: warning: \`-l' is ignored for archives/objects" 1>&2
-	    continue
-	  fi
-	  name=`$echo "X$deplib" | $Xsed -e 's/^-l//'`
-	  if test "$linkmode" = lib; then
-	    searchdirs="$newlib_search_path $lib_search_path $compiler_lib_search_dirs $sys_lib_search_path $shlib_search_path"
-	  else
-	    searchdirs="$newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path"
+	  if test -n "$tstripme" && test -n "$striplib"; then
+	    func_show_eval "$striplib $destdir/$realname" 'exit $?'
 	  fi
-	  for searchdir in $searchdirs; do
-	    for search_ext in .la $std_shrext .so .a; do
-	      # Search the libtool library
-	      lib="$searchdir/lib${name}${search_ext}"
-	      if test -f "$lib"; then
-		if test "$search_ext" = ".la"; then
-		  found=yes
-		else
-		  found=no
-		fi
-		break 2
-	      fi
+
+	  if test "$#" -gt 0; then
+	    # Delete the old symlinks, and create new ones.
+	    # Try `ln -sf' first, because the `ln' binary might depend on
+	    # the symlink we replace!  Solaris /bin/ln does not understand -f,
+	    # so we also need to try rm && ln -s.
+	    for linkname
+	    do
+	      test "$linkname" != "$realname" \
+		&& func_show_eval "(cd $destdir && { $LN_S -f $realname $linkname || { $RM $linkname && $LN_S $realname $linkname; }; })"
 	    done
-	  done
-	  if test "$found" != yes; then
-	    # deplib doesn't seem to be a libtool library
-	    if test "$linkmode,$pass" = "prog,link"; then
-	      compile_deplibs="$deplib $compile_deplibs"
-	      finalize_deplibs="$deplib $finalize_deplibs"
-	    else
-	      deplibs="$deplib $deplibs"
-	      test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs"
-	    fi
-	    continue
-	  else # deplib is a libtool library
-	    # If $allow_libtool_libs_with_static_runtimes && $deplib is a stdlib,
-	    # We need to do some special things here, and not later.
-	    if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
-	      case " $predeps $postdeps " in
-	      *" $deplib "*)
-		if (${SED} -e '2q' $lib |
-                    grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
-		  library_names=
-		  old_library=
-		  case $lib in
-		  */* | *\\*) . $lib ;;
-		  *) . ./$lib ;;
-		  esac
-		  for l in $old_library $library_names; do
-		    ll="$l"
-		  done
-		  if test "X$ll" = "X$old_library" ; then # only static version available
-		    found=no
-		    ladir=`$echo "X$lib" | $Xsed -e 's%/[^/]*$%%'`
-		    test "X$ladir" = "X$lib" && ladir="."
-		    lib=$ladir/$old_library
-		    if test "$linkmode,$pass" = "prog,link"; then
-		      compile_deplibs="$deplib $compile_deplibs"
-		      finalize_deplibs="$deplib $finalize_deplibs"
-		    else
-		      deplibs="$deplib $deplibs"
-		      test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs"
-		    fi
-		    continue
-		  fi
-		fi
-	        ;;
-	      *) ;;
-	      esac
-	    fi
-	  fi
-	  ;; # -l
-	-L*)
-	  case $linkmode in
-	  lib)
-	    deplibs="$deplib $deplibs"
-	    test "$pass" = conv && continue
-	    newdependency_libs="$deplib $newdependency_libs"
-	    newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`
-	    ;;
-	  prog)
-	    if test "$pass" = conv; then
-	      deplibs="$deplib $deplibs"
-	      continue
-	    fi
-	    if test "$pass" = scan; then
-	      deplibs="$deplib $deplibs"
-	    else
-	      compile_deplibs="$deplib $compile_deplibs"
-	      finalize_deplibs="$deplib $finalize_deplibs"
-	    fi
-	    newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`
-	    ;;
-	  *)
-	    $echo "$modename: warning: \`-L' is ignored for archives/objects" 1>&2
-	    ;;
-	  esac # linkmode
-	  continue
-	  ;; # -L
-	-R*)
-	  if test "$pass" = link; then
-	    dir=`$echo "X$deplib" | $Xsed -e 's/^-R//'`
-	    # Make sure the xrpath contains only unique directories.
-	    case "$xrpath " in
-	    *" $dir "*) ;;
-	    *) xrpath="$xrpath $dir" ;;
-	    esac
-	  fi
-	  deplibs="$deplib $deplibs"
-	  continue
-	  ;;
-	*.la) lib="$deplib" ;;
-	*.$libext)
-	  if test "$pass" = conv; then
-	    deplibs="$deplib $deplibs"
-	    continue
-	  fi
-	  case $linkmode in
-	  lib)
-	    valid_a_lib=no
-	    case $deplibs_check_method in
-	      match_pattern*)
-		set dummy $deplibs_check_method
-	        match_pattern_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"`
-		if eval $echo \"$deplib\" 2>/dev/null \
-		    | $SED 10q \
-		    | $EGREP "$match_pattern_regex" > /dev/null; then
-		  valid_a_lib=yes
-		fi
-		;;
-	      pass_all)
-		valid_a_lib=yes
-		;;
-            esac
-	    if test "$valid_a_lib" != yes; then
-	      $echo
-	      $echo "*** Warning: Trying to link with static lib archive $deplib."
-	      $echo "*** I have the capability to make that library automatically link in when"
-	      $echo "*** you link to this library.  But I can only do this if you have a"
-	      $echo "*** shared version of the library, which you do not appear to have"
-	      $echo "*** because the file extensions .$libext of this argument makes me believe"
-	      $echo "*** that it is just a static archive that I should not used here."
-	    else
-	      $echo
-	      $echo "*** Warning: Linking the shared library $output against the"
-	      $echo "*** static library $deplib is not portable!"
-	      deplibs="$deplib $deplibs"
-	    fi
-	    continue
-	    ;;
-	  prog)
-	    if test "$pass" != link; then
-	      deplibs="$deplib $deplibs"
-	    else
-	      compile_deplibs="$deplib $compile_deplibs"
-	      finalize_deplibs="$deplib $finalize_deplibs"
-	    fi
-	    continue
-	    ;;
-	  esac # linkmode
-	  ;; # *.$libext
-	*.lo | *.$objext)
-	  if test "$pass" = conv; then
-	    deplibs="$deplib $deplibs"
-	  elif test "$linkmode" = prog; then
-	    if test "$pass" = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then
-	      # If there is no dlopen support or we're linking statically,
-	      # we need to preload.
-	      newdlprefiles="$newdlprefiles $deplib"
-	      compile_deplibs="$deplib $compile_deplibs"
-	      finalize_deplibs="$deplib $finalize_deplibs"
-	    else
-	      newdlfiles="$newdlfiles $deplib"
-	    fi
 	  fi
-	  continue
-	  ;;
-	%DEPLIBS%)
-	  alldeplibs=yes
-	  continue
-	  ;;
-	esac # case $deplib
-	if test "$found" = yes || test -f "$lib"; then :
-	else
-	  $echo "$modename: cannot find the library \`$lib' or unhandled argument \`$deplib'" 1>&2
-	  exit $EXIT_FAILURE
-	fi
 
-	# Check to see that this really is a libtool archive.
-	if (${SED} -e '2q' $lib | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
-	else
-	  $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
-	  exit $EXIT_FAILURE
+	  # Do each command in the postinstall commands.
+	  lib="$destdir/$realname"
+	  func_execute_cmds "$postinstall_cmds" 'exit $?'
 	fi
 
-	ladir=`$echo "X$lib" | $Xsed -e 's%/[^/]*$%%'`
-	test "X$ladir" = "X$lib" && ladir="."
+	# Install the pseudo-library for information purposes.
+	func_basename "$file"
+	name="$func_basename_result"
+	instname="$dir/$name"i
+	func_show_eval "$install_prog $instname $destdir/$name" 'exit $?'
 
-	dlname=
-	dlopen=
-	dlpreopen=
-	libdir=
-	library_names=
-	old_library=
-	# If the library was installed with an old release of libtool,
-	# it will not redefine variables installed, or shouldnotlink
-	installed=yes
-	shouldnotlink=no
-	avoidtemprpath=
+	# Maybe install the static library, too.
+	test -n "$old_library" && staticlibs="$staticlibs $dir/$old_library"
+	;;
 
+      *.lo)
+	# Install (i.e. copy) a libtool object.
 
-	# Read the .la file
-	case $lib in
-	*/* | *\\*) . $lib ;;
-	*) . ./$lib ;;
+	# Figure out destination file name, if it wasn't already specified.
+	if test -n "$destname"; then
+	  destfile="$destdir/$destname"
+	else
+	  func_basename "$file"
+	  destfile="$func_basename_result"
+	  destfile="$destdir/$destfile"
+	fi
+
+	# Deduce the name of the destination old-style object file.
+	case $destfile in
+	*.lo)
+	  func_lo2o "$destfile"
+	  staticdest=$func_lo2o_result
+	  ;;
+	*.$objext)
+	  staticdest="$destfile"
+	  destfile=
+	  ;;
+	*)
+	  func_fatal_help "cannot copy a libtool object to \`$destfile'"
+	  ;;
 	esac
 
-	if test "$linkmode,$pass" = "lib,link" ||
-	   test "$linkmode,$pass" = "prog,scan" ||
-	   { test "$linkmode" != prog && test "$linkmode" != lib; }; then
-	  test -n "$dlopen" && dlfiles="$dlfiles $dlopen"
-	  test -n "$dlpreopen" && dlprefiles="$dlprefiles $dlpreopen"
+	# Install the libtool object if requested.
+	test -n "$destfile" && \
+	  func_show_eval "$install_prog $file $destfile" 'exit $?'
+
+	# Install the old object if enabled.
+	if test "$build_old_libs" = yes; then
+	  # Deduce the name of the old-style object file.
+	  func_lo2o "$file"
+	  staticobj=$func_lo2o_result
+	  func_show_eval "$install_prog \$staticobj \$staticdest" 'exit $?'
 	fi
+	exit $EXIT_SUCCESS
+	;;
 
-	if test "$pass" = conv; then
-	  # Only check for convenience libraries
-	  deplibs="$lib $deplibs"
-	  if test -z "$libdir"; then
-	    if test -z "$old_library"; then
-	      $echo "$modename: cannot find name of link library for \`$lib'" 1>&2
-	      exit $EXIT_FAILURE
-	    fi
-	    # It is a libtool convenience library, so add in its objects.
-	    convenience="$convenience $ladir/$objdir/$old_library"
-	    old_convenience="$old_convenience $ladir/$objdir/$old_library"
-	    tmp_libs=
-	    for deplib in $dependency_libs; do
-	      deplibs="$deplib $deplibs"
-              if test "X$duplicate_deps" = "Xyes" ; then
-	        case "$tmp_libs " in
-	        *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
-	        esac
-              fi
-	      tmp_libs="$tmp_libs $deplib"
-	    done
-	  elif test "$linkmode" != prog && test "$linkmode" != lib; then
-	    $echo "$modename: \`$lib' is not a convenience library" 1>&2
-	    exit $EXIT_FAILURE
-	  fi
-	  continue
-	fi # $pass = conv
+      *)
+	# Figure out destination file name, if it wasn't already specified.
+	if test -n "$destname"; then
+	  destfile="$destdir/$destname"
+	else
+	  func_basename "$file"
+	  destfile="$func_basename_result"
+	  destfile="$destdir/$destfile"
+	fi
 
+	# If the file is missing, and there is a .exe on the end, strip it
+	# because it is most likely a libtool script we actually want to
+	# install
+	stripped_ext=""
+	case $file in
+	  *.exe)
+	    if test ! -f "$file"; then
+	      func_stripname '' '.exe' "$file"
+	      file=$func_stripname_result
+	      stripped_ext=".exe"
+	    fi
+	    ;;
+	esac
 
-	# Get the name of the library we link against.
-	linklib=
-	for l in $old_library $library_names; do
-	  linklib="$l"
-	done
-	if test -z "$linklib"; then
-	  $echo "$modename: cannot find name of link library for \`$lib'" 1>&2
-	  exit $EXIT_FAILURE
-	fi
+	# Do a test to see if this is really a libtool program.
+	case $host in
+	*cygwin* | *mingw*)
+	    if func_ltwrapper_executable_p "$file"; then
+	      func_ltwrapper_scriptname "$file"
+	      wrapper=$func_ltwrapper_scriptname_result
+	    else
+	      func_stripname '' '.exe' "$file"
+	      wrapper=$func_stripname_result
+	    fi
+	    ;;
+	*)
+	    wrapper=$file
+	    ;;
+	esac
+	if func_ltwrapper_script_p "$wrapper"; then
+	  notinst_deplibs=
+	  relink_command=
 
-	# This library was specified with -dlopen.
-	if test "$pass" = dlopen; then
-	  if test -z "$libdir"; then
-	    $echo "$modename: cannot -dlopen a convenience library: \`$lib'" 1>&2
-	    exit $EXIT_FAILURE
-	  fi
-	  if test -z "$dlname" ||
-	     test "$dlopen_support" != yes ||
-	     test "$build_libtool_libs" = no; then
-	    # If there is no dlname, no dlopen support or we're linking
-	    # statically, we need to preload.  We also need to preload any
-	    # dependent libraries so libltdl's deplib preloader doesn't
-	    # bomb out in the load deplibs phase.
-	    dlprefiles="$dlprefiles $lib $dependency_libs"
+	  func_source "$wrapper"
+
+	  # Check the variables that should have been set.
+	  test -z "$generated_by_libtool_version" && \
+	    func_fatal_error "invalid libtool wrapper script \`$wrapper'"
+
+	  finalize=yes
+	  for lib in $notinst_deplibs; do
+	    # Check to see that each library is installed.
+	    libdir=
+	    if test -f "$lib"; then
+	      func_source "$lib"
+	    fi
+	    libfile="$libdir/"`$ECHO "X$lib" | $Xsed -e 's%^.*/%%g'` ### testsuite: skip nested quoting test
+	    if test -n "$libdir" && test ! -f "$libfile"; then
+	      func_warning "\`$lib' has not been installed in \`$libdir'"
+	      finalize=no
+	    fi
+	  done
+
+	  relink_command=
+	  func_source "$wrapper"
+
+	  outputname=
+	  if test "$fast_install" = no && test -n "$relink_command"; then
+	    $opt_dry_run || {
+	      if test "$finalize" = yes; then
+	        tmpdir=`func_mktempdir`
+		func_basename "$file$stripped_ext"
+		file="$func_basename_result"
+	        outputname="$tmpdir/$file"
+	        # Replace the output file specification.
+	        relink_command=`$ECHO "X$relink_command" | $Xsed -e 's%@OUTPUT@%'"$outputname"'%g'`
+
+	        $opt_silent || {
+	          func_quote_for_expand "$relink_command"
+		  eval "func_echo $func_quote_for_expand_result"
+	        }
+	        if eval "$relink_command"; then :
+	          else
+		  func_error "error: relink \`$file' with the above command before installing it"
+		  $opt_dry_run || ${RM}r "$tmpdir"
+		  continue
+	        fi
+	        file="$outputname"
+	      else
+	        func_warning "cannot relink \`$file'"
+	      fi
+	    }
 	  else
-	    newdlfiles="$newdlfiles $lib"
+	    # Install the binary that we compiled earlier.
+	    file=`$ECHO "X$file$stripped_ext" | $Xsed -e "s%\([^/]*\)$%$objdir/\1%"`
 	  fi
-	  continue
-	fi # $pass = dlopen
+	fi
 
-	# We need an absolute path.
-	case $ladir in
-	[\\/]* | [A-Za-z]:[\\/]*) abs_ladir="$ladir" ;;
-	*)
-	  abs_ladir=`cd "$ladir" && pwd`
-	  if test -z "$abs_ladir"; then
-	    $echo "$modename: warning: cannot determine absolute directory name of \`$ladir'" 1>&2
-	    $echo "$modename: passing it literally to the linker, although it might fail" 1>&2
-	    abs_ladir="$ladir"
-	  fi
+	# remove .exe since cygwin /usr/bin/install will append another
+	# one anyway
+	case $install_prog,$host in
+	*/usr/bin/install*,*cygwin*)
+	  case $file:$destfile in
+	  *.exe:*.exe)
+	    # this is ok
+	    ;;
+	  *.exe:*)
+	    destfile=$destfile.exe
+	    ;;
+	  *:*.exe)
+	    func_stripname '' '.exe' "$destfile"
+	    destfile=$func_stripname_result
+	    ;;
+	  esac
 	  ;;
 	esac
-	laname=`$echo "X$lib" | $Xsed -e 's%^.*/%%'`
+	func_show_eval "$install_prog\$stripme \$file \$destfile" 'exit $?'
+	$opt_dry_run || if test -n "$outputname"; then
+	  ${RM}r "$tmpdir"
+	fi
+	;;
+      esac
+    done
 
-	# Find the relevant object directory and library name.
-	if test "X$installed" = Xyes; then
-	  if test ! -f "$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then
-	    $echo "$modename: warning: library \`$lib' was moved." 1>&2
-	    dir="$ladir"
-	    absdir="$abs_ladir"
-	    libdir="$abs_ladir"
-	  else
-	    dir="$libdir"
-	    absdir="$libdir"
-	  fi
-	  test "X$hardcode_automatic" = Xyes && avoidtemprpath=yes
-	else
-	  if test ! -f "$ladir/$objdir/$linklib" && test -f "$abs_ladir/$linklib"; then
-	    dir="$ladir"
-	    absdir="$abs_ladir"
-	    # Remove this search path later
-	    notinst_path="$notinst_path $abs_ladir"
-	  else
-	    dir="$ladir/$objdir"
-	    absdir="$abs_ladir/$objdir"
-	    # Remove this search path later
-	    notinst_path="$notinst_path $abs_ladir"
-	  fi
-	fi # $installed = yes
-	name=`$echo "X$laname" | $Xsed -e 's/\.la$//' -e 's/^lib//'`
+    for file in $staticlibs; do
+      func_basename "$file"
+      name="$func_basename_result"
 
-	# This library was specified with -dlpreopen.
-	if test "$pass" = dlpreopen; then
-	  if test -z "$libdir"; then
-	    $echo "$modename: cannot -dlpreopen a convenience library: \`$lib'" 1>&2
-	    exit $EXIT_FAILURE
+      # Set up the ranlib parameters.
+      oldlib="$destdir/$name"
+
+      func_show_eval "$install_prog \$file \$oldlib" 'exit $?'
+
+      if test -n "$stripme" && test -n "$old_striplib"; then
+	func_show_eval "$old_striplib $oldlib" 'exit $?'
+      fi
+
+      # Do each command in the postinstall commands.
+      func_execute_cmds "$old_postinstall_cmds" 'exit $?'
+    done
+
+    test -n "$future_libdirs" && \
+      func_warning "remember to run \`$progname --finish$future_libdirs'"
+
+    if test -n "$current_libdirs"; then
+      # Maybe just do a dry run.
+      $opt_dry_run && current_libdirs=" -n$current_libdirs"
+      exec_cmd='$SHELL $progpath $preserve_args --finish$current_libdirs'
+    else
+      exit $EXIT_SUCCESS
+    fi
+}
+
+test "$mode" = install && func_mode_install ${1+"$@"}
+
+
+# func_generate_dlsyms outputname originator pic_p
+# Extract symbols from dlprefiles and create ${outputname}S.o with
+# a dlpreopen symbol table.
+func_generate_dlsyms ()
+{
+    $opt_debug
+    my_outputname="$1"
+    my_originator="$2"
+    my_pic_p="${3-no}"
+    my_prefix=`$ECHO "$my_originator" | sed 's%[^a-zA-Z0-9]%_%g'`
+    my_dlsyms=
+
+    if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
+      if test -n "$NM" && test -n "$global_symbol_pipe"; then
+	my_dlsyms="${my_outputname}S.c"
+      else
+	func_error "not configured to extract global symbols from dlpreopened files"
+      fi
+    fi
+
+    if test -n "$my_dlsyms"; then
+      case $my_dlsyms in
+      "") ;;
+      *.c)
+	# Discover the nlist of each of the dlfiles.
+	nlist="$output_objdir/${my_outputname}.nm"
+
+	func_show_eval "$RM $nlist ${nlist}S ${nlist}T"
+
+	# Parse the name list into a source file.
+	func_verbose "creating $output_objdir/$my_dlsyms"
+
+	$opt_dry_run || $ECHO > "$output_objdir/$my_dlsyms" "\
+/* $my_dlsyms - symbol resolution table for \`$my_outputname' dlsym emulation. */
+/* Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION */
+
+#ifdef __cplusplus
+extern \"C\" {
+#endif
+
+/* External symbol declarations for the compiler. */\
+"
+
+	if test "$dlself" = yes; then
+	  func_verbose "generating symbol list for \`$output'"
+
+	  $opt_dry_run || echo ': @PROGRAM@ ' > "$nlist"
+
+	  # Add our own program objects to the symbol list.
+	  progfiles=`$ECHO "X$objs$old_deplibs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
+	  for progfile in $progfiles; do
+	    func_verbose "extracting global C symbols from \`$progfile'"
+	    $opt_dry_run || eval "$NM $progfile | $global_symbol_pipe >> '$nlist'"
+	  done
+
+	  if test -n "$exclude_expsyms"; then
+	    $opt_dry_run || {
+	      eval '$EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T'
+	      eval '$MV "$nlist"T "$nlist"'
+	    }
 	  fi
-	  # Prefer using a static library (so that no silly _DYNAMIC symbols
-	  # are required to link).
-	  if test -n "$old_library"; then
-	    newdlprefiles="$newdlprefiles $dir/$old_library"
-	  # Otherwise, use the dlname, so that lt_dlopen finds it.
-	  elif test -n "$dlname"; then
-	    newdlprefiles="$newdlprefiles $dir/$dlname"
-	  else
-	    newdlprefiles="$newdlprefiles $dir/$linklib"
+
+	  if test -n "$export_symbols_regex"; then
+	    $opt_dry_run || {
+	      eval '$EGREP -e "$export_symbols_regex" "$nlist" > "$nlist"T'
+	      eval '$MV "$nlist"T "$nlist"'
+	    }
 	  fi
-	fi # $pass = dlpreopen
 
-	if test -z "$libdir"; then
-	  # Link the convenience library
-	  if test "$linkmode" = lib; then
-	    deplibs="$dir/$old_library $deplibs"
-	  elif test "$linkmode,$pass" = "prog,link"; then
-	    compile_deplibs="$dir/$old_library $compile_deplibs"
-	    finalize_deplibs="$dir/$old_library $finalize_deplibs"
+	  # Prepare the list of exported symbols
+	  if test -z "$export_symbols"; then
+	    export_symbols="$output_objdir/$outputname.exp"
+	    $opt_dry_run || {
+	      $RM $export_symbols
+	      eval "${SED} -n -e '/^: @PROGRAM@ $/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"'
+	      case $host in
+	      *cygwin* | *mingw* | *cegcc* )
+                eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
+                eval 'cat "$export_symbols" >> "$output_objdir/$outputname.def"'
+	        ;;
+	      esac
+	    }
 	  else
-	    deplibs="$lib $deplibs" # used for prog,scan pass
+	    $opt_dry_run || {
+	      eval "${SED} -e 's/\([].[*^$]\)/\\\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"'
+	      eval '$GREP -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T'
+	      eval '$MV "$nlist"T "$nlist"'
+	      case $host in
+	        *cygwin | *mingw* | *cegcc* )
+	          eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
+	          eval 'cat "$nlist" >> "$output_objdir/$outputname.def"'
+	          ;;
+	      esac
+	    }
 	  fi
-	  continue
 	fi
 
+	for dlprefile in $dlprefiles; do
+	  func_verbose "extracting global C symbols from \`$dlprefile'"
+	  func_basename "$dlprefile"
+	  name="$func_basename_result"
+	  $opt_dry_run || {
+	    eval '$ECHO ": $name " >> "$nlist"'
+	    eval "$NM $dlprefile 2>/dev/null | $global_symbol_pipe >> '$nlist'"
+	  }
+	done
 
-	if test "$linkmode" = prog && test "$pass" != link; then
-	  newlib_search_path="$newlib_search_path $ladir"
-	  deplibs="$lib $deplibs"
+	$opt_dry_run || {
+	  # Make sure we have at least an empty file.
+	  test -f "$nlist" || : > "$nlist"
+
+	  if test -n "$exclude_expsyms"; then
+	    $EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T
+	    $MV "$nlist"T "$nlist"
+	  fi
 
-	  linkalldeplibs=no
-	  if test "$link_all_deplibs" != no || test -z "$library_names" ||
-	     test "$build_libtool_libs" = no; then
-	    linkalldeplibs=yes
+	  # Try sorting and uniquifying the output.
+	  if $GREP -v "^: " < "$nlist" |
+	      if sort -k 3 </dev/null >/dev/null 2>&1; then
+		sort -k 3
+	      else
+		sort +2
+	      fi |
+	      uniq > "$nlist"S; then
+	    :
+	  else
+	    $GREP -v "^: " < "$nlist" > "$nlist"S
 	  fi
 
-	  tmp_libs=
-	  for deplib in $dependency_libs; do
-	    case $deplib in
-	    -L*) newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`;; ### testsuite: skip nested quoting test
-	    esac
-	    # Need to link against all dependency_libs?
-	    if test "$linkalldeplibs" = yes; then
-	      deplibs="$deplib $deplibs"
-	    else
-	      # Need to hardcode shared library paths
-	      # or/and link against static libraries
-	      newdependency_libs="$deplib $newdependency_libs"
-	    fi
-	    if test "X$duplicate_deps" = "Xyes" ; then
-	      case "$tmp_libs " in
-	      *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
-	      esac
-	    fi
-	    tmp_libs="$tmp_libs $deplib"
-	  done # for deplib
-	  continue
-	fi # $linkmode = prog...
+	  if test -f "$nlist"S; then
+	    eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$my_dlsyms"'
+	  else
+	    $ECHO '/* NONE */' >> "$output_objdir/$my_dlsyms"
+	  fi
 
-	if test "$linkmode,$pass" = "prog,link"; then
-	  if test -n "$library_names" &&
-	     { { test "$prefer_static_libs" = no ||
-		 test "$prefer_static_libs,$installed" = "built,yes"; } ||
-	       test -z "$old_library"; }; then
-	    # We need to hardcode the library path
-	    if test -n "$shlibpath_var" && test -z "$avoidtemprpath" ; then
-	      # Make sure the rpath contains only unique directories.
-	      case "$temp_rpath " in
-	      *" $dir "*) ;;
-	      *" $absdir "*) ;;
-	      *) temp_rpath="$temp_rpath $absdir" ;;
-	      esac
-	    fi
+	  $ECHO >> "$output_objdir/$my_dlsyms" "\
 
-	    # Hardcode the library path.
-	    # Skip directories that are in the system default run-time
-	    # search path.
-	    case " $sys_lib_dlsearch_path " in
-	    *" $absdir "*) ;;
-	    *)
-	      case "$compile_rpath " in
-	      *" $absdir "*) ;;
-	      *) compile_rpath="$compile_rpath $absdir"
-	      esac
-	      ;;
-	    esac
-	    case " $sys_lib_dlsearch_path " in
-	    *" $libdir "*) ;;
-	    *)
-	      case "$finalize_rpath " in
-	      *" $libdir "*) ;;
-	      *) finalize_rpath="$finalize_rpath $libdir"
-	      esac
-	      ;;
-	    esac
-	  fi # $linkmode,$pass = prog,link...
-
-	  if test "$alldeplibs" = yes &&
-	     { test "$deplibs_check_method" = pass_all ||
-	       { test "$build_libtool_libs" = yes &&
-		 test -n "$library_names"; }; }; then
-	    # We only need to search for static libraries
-	    continue
-	  fi
-	fi
-
-	link_static=no # Whether the deplib will be linked statically
-	use_static_libs=$prefer_static_libs
-	if test "$use_static_libs" = built && test "$installed" = yes ; then
-	  use_static_libs=no
-	fi
-	if test -n "$library_names" &&
-	   { test "$use_static_libs" = no || test -z "$old_library"; }; then
-	  if test "$installed" = no; then
-	    notinst_deplibs="$notinst_deplibs $lib"
-	    need_relink=yes
-	  fi
-	  # This is a shared library
+/* The mapping between symbol names and symbols.  */
+typedef struct {
+  const char *name;
+  void *address;
+} lt_dlsymlist;
+"
+	  case $host in
+	  *cygwin* | *mingw* | *cegcc* )
+	    $ECHO >> "$output_objdir/$my_dlsyms" "\
+/* DATA imports from DLLs on WIN32 con't be const, because
+   runtime relocations are performed -- see ld's documentation
+   on pseudo-relocs.  */"
+	    lt_dlsym_const= ;;
+	  *osf5*)
+	    echo >> "$output_objdir/$my_dlsyms" "\
+/* This system does not cope well with relocations in const data */"
+	    lt_dlsym_const= ;;
+	  *)
+	    lt_dlsym_const=const ;;
+	  esac
 
-	  # Warn about portability, can't link against -module's on
-	  # some systems (darwin)
-	  if test "$shouldnotlink" = yes && test "$pass" = link ; then
-	    $echo
-	    if test "$linkmode" = prog; then
-	      $echo "*** Warning: Linking the executable $output against the loadable module"
-	    else
-	      $echo "*** Warning: Linking the shared library $output against the loadable module"
-	    fi
-	    $echo "*** $linklib is not portable!"
-	  fi
-	  if test "$linkmode" = lib &&
-	     test "$hardcode_into_libs" = yes; then
-	    # Hardcode the library path.
-	    # Skip directories that are in the system default run-time
-	    # search path.
-	    case " $sys_lib_dlsearch_path " in
-	    *" $absdir "*) ;;
-	    *)
-	      case "$compile_rpath " in
-	      *" $absdir "*) ;;
-	      *) compile_rpath="$compile_rpath $absdir"
-	      esac
-	      ;;
-	    esac
-	    case " $sys_lib_dlsearch_path " in
-	    *" $libdir "*) ;;
-	    *)
-	      case "$finalize_rpath " in
-	      *" $libdir "*) ;;
-	      *) finalize_rpath="$finalize_rpath $libdir"
-	      esac
-	      ;;
-	    esac
-	  fi
+	  $ECHO >> "$output_objdir/$my_dlsyms" "\
+extern $lt_dlsym_const lt_dlsymlist
+lt_${my_prefix}_LTX_preloaded_symbols[];
+$lt_dlsym_const lt_dlsymlist
+lt_${my_prefix}_LTX_preloaded_symbols[] =
+{\
+  { \"$my_originator\", (void *) 0 },"
 
-	  if test -n "$old_archive_from_expsyms_cmds"; then
-	    # figure out the soname
-	    set dummy $library_names
-	    realname="$2"
-	    shift; shift
-	    libname=`eval \\$echo \"$libname_spec\"`
-	    # use dlname if we got it. it's perfectly good, no?
-	    if test -n "$dlname"; then
-	      soname="$dlname"
-	    elif test -n "$soname_spec"; then
-	      # bleh windows
-	      case $host in
-	      *cygwin* | mingw*)
-		major=`expr $current - $age`
-		versuffix="-$major"
-		;;
-	      esac
-	      eval soname=\"$soname_spec\"
-	    else
-	      soname="$realname"
-	    fi
+	  case $need_lib_prefix in
+	  no)
+	    eval "$global_symbol_to_c_name_address" < "$nlist" >> "$output_objdir/$my_dlsyms"
+	    ;;
+	  *)
+	    eval "$global_symbol_to_c_name_address_lib_prefix" < "$nlist" >> "$output_objdir/$my_dlsyms"
+	    ;;
+	  esac
+	  $ECHO >> "$output_objdir/$my_dlsyms" "\
+  {0, (void *) 0}
+};
 
-	    # Make a new name for the extract_expsyms_cmds to use
-	    soroot="$soname"
-	    soname=`$echo $soroot | ${SED} -e 's/^.*\///'`
-	    newlib="libimp-`$echo $soname | ${SED} 's/^lib//;s/\.dll$//'`.a"
+/* This works around a problem in FreeBSD linker */
+#ifdef FREEBSD_WORKAROUND
+static const void *lt_preloaded_setup() {
+  return lt_${my_prefix}_LTX_preloaded_symbols;
+}
+#endif
 
-	    # If the library has no export list, then create one now
-	    if test -f "$output_objdir/$soname-def"; then :
-	    else
-	      $show "extracting exported symbol list from \`$soname'"
-	      save_ifs="$IFS"; IFS='~'
-	      cmds=$extract_expsyms_cmds
-	      for cmd in $cmds; do
-		IFS="$save_ifs"
-		eval cmd=\"$cmd\"
-		$show "$cmd"
-		$run eval "$cmd" || exit $?
-	      done
-	      IFS="$save_ifs"
-	    fi
+#ifdef __cplusplus
+}
+#endif\
+"
+	} # !$opt_dry_run
 
-	    # Create $newlib
-	    if test -f "$output_objdir/$newlib"; then :; else
-	      $show "generating import library for \`$soname'"
-	      save_ifs="$IFS"; IFS='~'
-	      cmds=$old_archive_from_expsyms_cmds
-	      for cmd in $cmds; do
-		IFS="$save_ifs"
-		eval cmd=\"$cmd\"
-		$show "$cmd"
-		$run eval "$cmd" || exit $?
-	      done
-	      IFS="$save_ifs"
+	pic_flag_for_symtable=
+	case "$compile_command " in
+	*" -static "*) ;;
+	*)
+	  case $host in
+	  # compiling the symbol table file with pic_flag works around
+	  # a FreeBSD bug that causes programs to crash when -lm is
+	  # linked before any other PIC object.  But we must not use
+	  # pic_flag when linking with -static.  The problem exists in
+	  # FreeBSD 2.2.6 and is fixed in FreeBSD 3.1.
+	  *-*-freebsd2*|*-*-freebsd3.0*|*-*-freebsdelf3.0*)
+	    pic_flag_for_symtable=" $pic_flag -DFREEBSD_WORKAROUND" ;;
+	  *-*-hpux*)
+	    pic_flag_for_symtable=" $pic_flag"  ;;
+	  *)
+	    if test "X$my_pic_p" != Xno; then
+	      pic_flag_for_symtable=" $pic_flag"
 	    fi
-	    # make sure the library variables are pointing to the new library
-	    dir=$output_objdir
-	    linklib=$newlib
-	  fi # test -n "$old_archive_from_expsyms_cmds"
+	    ;;
+	  esac
+	  ;;
+	esac
+	symtab_cflags=
+	for arg in $LTCFLAGS; do
+	  case $arg in
+	  -pie | -fpie | -fPIE) ;;
+	  *) symtab_cflags="$symtab_cflags $arg" ;;
+	  esac
+	done
 
-	  if test "$linkmode" = prog || test "$mode" != relink; then
-	    add_shlibpath=
-	    add_dir=
-	    add=
-	    lib_linked=yes
-	    case $hardcode_action in
-	    immediate | unsupported)
-	      if test "$hardcode_direct" = no; then
-		add="$dir/$linklib"
-		case $host in
-		  *-*-sco3.2v5.0.[024]*) add_dir="-L$dir" ;;
-		  *-*-sysv4*uw2*) add_dir="-L$dir" ;;
-		  *-*-sysv5OpenUNIX* | *-*-sysv5UnixWare7.[01].[10]* | \
-		    *-*-unixware7*) add_dir="-L$dir" ;;
-		  *-*-darwin* )
-		    # if the lib is a module then we can not link against
-		    # it, someone is ignoring the new warnings I added
-		    if /usr/bin/file -L $add 2> /dev/null |
-                      $EGREP ": [^:]* bundle" >/dev/null ; then
-		      $echo "** Warning, lib $linklib is a module, not a shared library"
-		      if test -z "$old_library" ; then
-		        $echo
-		        $echo "** And there doesn't seem to be a static archive available"
-		        $echo "** The link will probably fail, sorry"
-		      else
-		        add="$dir/$old_library"
-		      fi
-		    fi
-		esac
-	      elif test "$hardcode_minus_L" = no; then
-		case $host in
-		*-*-sunos*) add_shlibpath="$dir" ;;
-		esac
-		add_dir="-L$dir"
-		add="-l$name"
-	      elif test "$hardcode_shlibpath_var" = no; then
-		add_shlibpath="$dir"
-		add="-l$name"
-	      else
-		lib_linked=no
-	      fi
-	      ;;
-	    relink)
-	      if test "$hardcode_direct" = yes; then
-		add="$dir/$linklib"
-	      elif test "$hardcode_minus_L" = yes; then
-		add_dir="-L$dir"
-		# Try looking first in the location we're being installed to.
-		if test -n "$inst_prefix_dir"; then
-		  case $libdir in
-		    [\\/]*)
-		      add_dir="$add_dir -L$inst_prefix_dir$libdir"
-		      ;;
-		  esac
-		fi
-		add="-l$name"
-	      elif test "$hardcode_shlibpath_var" = yes; then
-		add_shlibpath="$dir"
-		add="-l$name"
-	      else
-		lib_linked=no
-	      fi
-	      ;;
-	    *) lib_linked=no ;;
-	    esac
+	# Now compile the dynamic symbol file.
+	func_show_eval '(cd $output_objdir && $LTCC$symtab_cflags -c$no_builtin_flag$pic_flag_for_symtable "$my_dlsyms")' 'exit $?'
 
-	    if test "$lib_linked" != yes; then
-	      $echo "$modename: configuration error: unsupported hardcode properties"
-	      exit $EXIT_FAILURE
-	    fi
+	# Clean up the generated files.
+	func_show_eval '$RM "$output_objdir/$my_dlsyms" "$nlist" "${nlist}S" "${nlist}T"'
 
-	    if test -n "$add_shlibpath"; then
-	      case :$compile_shlibpath: in
-	      *":$add_shlibpath:"*) ;;
-	      *) compile_shlibpath="$compile_shlibpath$add_shlibpath:" ;;
-	      esac
-	    fi
-	    if test "$linkmode" = prog; then
-	      test -n "$add_dir" && compile_deplibs="$add_dir $compile_deplibs"
-	      test -n "$add" && compile_deplibs="$add $compile_deplibs"
-	    else
-	      test -n "$add_dir" && deplibs="$add_dir $deplibs"
-	      test -n "$add" && deplibs="$add $deplibs"
-	      if test "$hardcode_direct" != yes && \
-		 test "$hardcode_minus_L" != yes && \
-		 test "$hardcode_shlibpath_var" = yes; then
-		case :$finalize_shlibpath: in
-		*":$libdir:"*) ;;
-		*) finalize_shlibpath="$finalize_shlibpath$libdir:" ;;
-		esac
-	      fi
-	    fi
+	# Transform the symbol file into the correct name.
+	symfileobj="$output_objdir/${my_outputname}S.$objext"
+	case $host in
+	*cygwin* | *mingw* | *cegcc* )
+	  if test -f "$output_objdir/$my_outputname.def"; then
+	    compile_command=`$ECHO "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"`
+	    finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"`
+	  else
+	    compile_command=`$ECHO "X$compile_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"`
+	    finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"`
 	  fi
+	  ;;
+	*)
+	  compile_command=`$ECHO "X$compile_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"`
+	  finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"`
+	  ;;
+	esac
+	;;
+      *)
+	func_fatal_error "unknown suffix for \`$my_dlsyms'"
+	;;
+      esac
+    else
+      # We keep going just in case the user didn't refer to
+      # lt_preloaded_symbols.  The linker will fail if global_symbol_pipe
+      # really was required.
+
+      # Nullify the symbol file.
+      compile_command=`$ECHO "X$compile_command" | $Xsed -e "s% @SYMFILE@%%"`
+      finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s% @SYMFILE@%%"`
+    fi
+}
 
-	  if test "$linkmode" = prog || test "$mode" = relink; then
-	    add_shlibpath=
-	    add_dir=
-	    add=
-	    # Finalize command for both is simple: just hardcode it.
-	    if test "$hardcode_direct" = yes; then
-	      add="$libdir/$linklib"
-	    elif test "$hardcode_minus_L" = yes; then
-	      add_dir="-L$libdir"
-	      add="-l$name"
-	    elif test "$hardcode_shlibpath_var" = yes; then
-	      case :$finalize_shlibpath: in
-	      *":$libdir:"*) ;;
-	      *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;;
-	      esac
-	      add="-l$name"
-	    elif test "$hardcode_automatic" = yes; then
-	      if test -n "$inst_prefix_dir" &&
-		 test -f "$inst_prefix_dir$libdir/$linklib" ; then
-	        add="$inst_prefix_dir$libdir/$linklib"
-	      else
-	        add="$libdir/$linklib"
-	      fi
-	    else
-	      # We cannot seem to hardcode it, guess we'll fake it.
-	      add_dir="-L$libdir"
-	      # Try looking first in the location we're being installed to.
-	      if test -n "$inst_prefix_dir"; then
-		case $libdir in
-		  [\\/]*)
-		    add_dir="$add_dir -L$inst_prefix_dir$libdir"
-		    ;;
-		esac
-	      fi
-	      add="-l$name"
-	    fi
+# func_win32_libid arg
+# return the library type of file 'arg'
+#
+# Need a lot of goo to handle *both* DLLs and import libs
+# Has to be a shell function in order to 'eat' the argument
+# that is supplied when $file_magic_command is called.
+func_win32_libid ()
+{
+  $opt_debug
+  win32_libid_type="unknown"
+  win32_fileres=`file -L $1 2>/dev/null`
+  case $win32_fileres in
+  *ar\ archive\ import\ library*) # definitely import
+    win32_libid_type="x86 archive import"
+    ;;
+  *ar\ archive*) # could be an import, or static
+    if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null |
+       $EGREP 'file format pe-i386(.*architecture: i386)?' >/dev/null ; then
+      win32_nmres=`eval $NM -f posix -A $1 |
+	$SED -n -e '
+	    1,100{
+		/ I /{
+		    s,.*,import,
+		    p
+		    q
+		}
+	    }'`
+      case $win32_nmres in
+      import*)  win32_libid_type="x86 archive import";;
+      *)        win32_libid_type="x86 archive static";;
+      esac
+    fi
+    ;;
+  *DLL*)
+    win32_libid_type="x86 DLL"
+    ;;
+  *executable*) # but shell scripts are "executable" too...
+    case $win32_fileres in
+    *MS\ Windows\ PE\ Intel*)
+      win32_libid_type="x86 DLL"
+      ;;
+    esac
+    ;;
+  esac
+  $ECHO "$win32_libid_type"
+}
 
-	    if test "$linkmode" = prog; then
-	      test -n "$add_dir" && finalize_deplibs="$add_dir $finalize_deplibs"
-	      test -n "$add" && finalize_deplibs="$add $finalize_deplibs"
-	    else
-	      test -n "$add_dir" && deplibs="$add_dir $deplibs"
-	      test -n "$add" && deplibs="$add $deplibs"
-	    fi
-	  fi
-	elif test "$linkmode" = prog; then
-	  # Here we assume that one of hardcode_direct or hardcode_minus_L
-	  # is not unsupported.  This is valid on all known static and
-	  # shared platforms.
-	  if test "$hardcode_direct" != unsupported; then
-	    test -n "$old_library" && linklib="$old_library"
-	    compile_deplibs="$dir/$linklib $compile_deplibs"
-	    finalize_deplibs="$dir/$linklib $finalize_deplibs"
-	  else
-	    compile_deplibs="-l$name -L$dir $compile_deplibs"
-	    finalize_deplibs="-l$name -L$dir $finalize_deplibs"
-	  fi
-	elif test "$build_libtool_libs" = yes; then
-	  # Not a shared library
-	  if test "$deplibs_check_method" != pass_all; then
-	    # We're trying link a shared library against a static one
-	    # but the system doesn't support it.
 
-	    # Just print a warning and add the library to dependency_libs so
-	    # that the program can be linked against the static library.
-	    $echo
-	    $echo "*** Warning: This system can not link to static lib archive $lib."
-	    $echo "*** I have the capability to make that library automatically link in when"
-	    $echo "*** you link to this library.  But I can only do this if you have a"
-	    $echo "*** shared version of the library, which you do not appear to have."
-	    if test "$module" = yes; then
-	      $echo "*** But as you try to build a module library, libtool will still create "
-	      $echo "*** a static module, that should work as long as the dlopening application"
-	      $echo "*** is linked with the -dlopen flag to resolve symbols at runtime."
-	      if test -z "$global_symbol_pipe"; then
-		$echo
-		$echo "*** However, this would only work if libtool was able to extract symbol"
-		$echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
-		$echo "*** not find such a program.  So, this module is probably useless."
-		$echo "*** \`nm' from GNU binutils and a full rebuild may help."
-	      fi
-	      if test "$build_old_libs" = no; then
-		build_libtool_libs=module
-		build_old_libs=yes
-	      else
-		build_libtool_libs=no
-	      fi
-	    fi
+
+# func_extract_an_archive dir oldlib
+func_extract_an_archive ()
+{
+    $opt_debug
+    f_ex_an_ar_dir="$1"; shift
+    f_ex_an_ar_oldlib="$1"
+    func_show_eval "(cd \$f_ex_an_ar_dir && $AR x \"\$f_ex_an_ar_oldlib\")" 'exit $?'
+    if ($AR t "$f_ex_an_ar_oldlib" | sort | sort -uc >/dev/null 2>&1); then
+     :
+    else
+      func_fatal_error "object name conflicts in archive: $f_ex_an_ar_dir/$f_ex_an_ar_oldlib"
+    fi
+}
+
+
+# func_extract_archives gentop oldlib ...
+func_extract_archives ()
+{
+    $opt_debug
+    my_gentop="$1"; shift
+    my_oldlibs=${1+"$@"}
+    my_oldobjs=""
+    my_xlib=""
+    my_xabs=""
+    my_xdir=""
+
+    for my_xlib in $my_oldlibs; do
+      # Extract the objects.
+      case $my_xlib in
+	[\\/]* | [A-Za-z]:[\\/]*) my_xabs="$my_xlib" ;;
+	*) my_xabs=`pwd`"/$my_xlib" ;;
+      esac
+      func_basename "$my_xlib"
+      my_xlib="$func_basename_result"
+      my_xlib_u=$my_xlib
+      while :; do
+        case " $extracted_archives " in
+	*" $my_xlib_u "*)
+	  func_arith $extracted_serial + 1
+	  extracted_serial=$func_arith_result
+	  my_xlib_u=lt$extracted_serial-$my_xlib ;;
+	*) break ;;
+	esac
+      done
+      extracted_archives="$extracted_archives $my_xlib_u"
+      my_xdir="$my_gentop/$my_xlib_u"
+
+      func_mkdir_p "$my_xdir"
+
+      case $host in
+      *-darwin*)
+	func_verbose "Extracting $my_xabs"
+	# Do not bother doing anything if just a dry run
+	$opt_dry_run || {
+	  darwin_orig_dir=`pwd`
+	  cd $my_xdir || exit $?
+	  darwin_archive=$my_xabs
+	  darwin_curdir=`pwd`
+	  darwin_base_archive=`basename "$darwin_archive"`
+	  darwin_arches=`$LIPO -info "$darwin_archive" 2>/dev/null | $GREP Architectures 2>/dev/null || true`
+	  if test -n "$darwin_arches"; then
+	    darwin_arches=`$ECHO "$darwin_arches" | $SED -e 's/.*are://'`
+	    darwin_arch=
+	    func_verbose "$darwin_base_archive has multiple architectures $darwin_arches"
+	    for darwin_arch in  $darwin_arches ; do
+	      func_mkdir_p "unfat-$$/${darwin_base_archive}-${darwin_arch}"
+	      $LIPO -thin $darwin_arch -output "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" "${darwin_archive}"
+	      cd "unfat-$$/${darwin_base_archive}-${darwin_arch}"
+	      func_extract_an_archive "`pwd`" "${darwin_base_archive}"
+	      cd "$darwin_curdir"
+	      $RM "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}"
+	    done # $darwin_arches
+            ## Okay now we've a bunch of thin objects, gotta fatten them up :)
+	    darwin_filelist=`find unfat-$$ -type f -name \*.o -print -o -name \*.lo -print | $SED -e "$basename" | sort -u`
+	    darwin_file=
+	    darwin_files=
+	    for darwin_file in $darwin_filelist; do
+	      darwin_files=`find unfat-$$ -name $darwin_file -print | $NL2SP`
+	      $LIPO -create -output "$darwin_file" $darwin_files
+	    done # $darwin_filelist
+	    $RM -rf unfat-$$
+	    cd "$darwin_orig_dir"
 	  else
-	    deplibs="$dir/$old_library $deplibs"
-	    link_static=yes
-	  fi
-	fi # link shared/static library?
+	    cd $darwin_orig_dir
+	    func_extract_an_archive "$my_xdir" "$my_xabs"
+	  fi # $darwin_arches
+	} # !$opt_dry_run
+	;;
+      *)
+        func_extract_an_archive "$my_xdir" "$my_xabs"
+	;;
+      esac
+      my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | $NL2SP`
+    done
 
-	if test "$linkmode" = lib; then
-	  if test -n "$dependency_libs" &&
-	     { test "$hardcode_into_libs" != yes ||
-	       test "$build_old_libs" = yes ||
-	       test "$link_static" = yes; }; then
-	    # Extract -R from dependency_libs
-	    temp_deplibs=
-	    for libdir in $dependency_libs; do
-	      case $libdir in
-	      -R*) temp_xrpath=`$echo "X$libdir" | $Xsed -e 's/^-R//'`
-		   case " $xrpath " in
-		   *" $temp_xrpath "*) ;;
-		   *) xrpath="$xrpath $temp_xrpath";;
-		   esac;;
-	      *) temp_deplibs="$temp_deplibs $libdir";;
-	      esac
-	    done
-	    dependency_libs="$temp_deplibs"
-	  fi
+    func_extract_archives_result="$my_oldobjs"
+}
 
-	  newlib_search_path="$newlib_search_path $absdir"
-	  # Link against this library
-	  test "$link_static" = no && newdependency_libs="$abs_ladir/$laname $newdependency_libs"
-	  # ... and its dependency_libs
-	  tmp_libs=
-	  for deplib in $dependency_libs; do
-	    newdependency_libs="$deplib $newdependency_libs"
-	    if test "X$duplicate_deps" = "Xyes" ; then
-	      case "$tmp_libs " in
-	      *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
-	      esac
-	    fi
-	    tmp_libs="$tmp_libs $deplib"
-	  done
 
-	  if test "$link_all_deplibs" != no; then
-	    # Add the search paths of all dependency libraries
-	    for deplib in $dependency_libs; do
-	      case $deplib in
-	      -L*) path="$deplib" ;;
-	      *.la)
-		dir=`$echo "X$deplib" | $Xsed -e 's%/[^/]*$%%'`
-		test "X$dir" = "X$deplib" && dir="."
-		# We need an absolute path.
-		case $dir in
-		[\\/]* | [A-Za-z]:[\\/]*) absdir="$dir" ;;
-		*)
-		  absdir=`cd "$dir" && pwd`
-		  if test -z "$absdir"; then
-		    $echo "$modename: warning: cannot determine absolute directory name of \`$dir'" 1>&2
-		    absdir="$dir"
-		  fi
-		  ;;
-		esac
-		if grep "^installed=no" $deplib > /dev/null; then
-		  path="$absdir/$objdir"
-		else
-		  eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
-		  if test -z "$libdir"; then
-		    $echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2
-		    exit $EXIT_FAILURE
-		  fi
-		  if test "$absdir" != "$libdir"; then
-		    $echo "$modename: warning: \`$deplib' seems to be moved" 1>&2
-		  fi
-		  path="$absdir"
-		fi
-		depdepl=
-		case $host in
-		*-*-darwin*)
-		  # we do not want to link against static libs,
-		  # but need to link against shared
-		  eval deplibrary_names=`${SED} -n -e 's/^library_names=\(.*\)$/\1/p' $deplib`
-		  eval deplibdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
-		  if test -n "$deplibrary_names" ; then
-		    for tmp in $deplibrary_names ; do
-		      depdepl=$tmp
-		    done
-		    if test -f "$deplibdir/$depdepl" ; then
-		      depdepl="$deplibdir/$depdepl"
-	      	    elif test -f "$path/$depdepl" ; then
-		      depdepl="$path/$depdepl"
-		    else
-		      # Can't find it, oh well...
-		      depdepl=
-		    fi
-		    # do not add paths which are already there
-		    case " $newlib_search_path " in
-		    *" $path "*) ;;
-		    *) newlib_search_path="$newlib_search_path $path";;
-		    esac
-		  fi
-		  path=""
-		  ;;
-		*)
-		  path="-L$path"
-		  ;;
-		esac
-		;;
-	      -l*)
-		case $host in
-		*-*-darwin*)
-		  # Again, we only want to link against shared libraries
-		  eval tmp_libs=`$echo "X$deplib" | $Xsed -e "s,^\-l,,"`
-		  for tmp in $newlib_search_path ; do
-		    if test -f "$tmp/lib$tmp_libs.dylib" ; then
-		      eval depdepl="$tmp/lib$tmp_libs.dylib"
-		      break
-		    fi
-		  done
-		  path=""
-		  ;;
-		*) continue ;;
-		esac
-		;;
-	      *) continue ;;
-	      esac
-	      case " $deplibs " in
-	      *" $path "*) ;;
-	      *) deplibs="$path $deplibs" ;;
-	      esac
-	      case " $deplibs " in
-	      *" $depdepl "*) ;;
-	      *) deplibs="$depdepl $deplibs" ;;
-	      esac
-	    done
-	  fi # link_all_deplibs != no
-	fi # linkmode = lib
-      done # for deplib in $libs
-      dependency_libs="$newdependency_libs"
-      if test "$pass" = dlpreopen; then
-	# Link the dlpreopened libraries before other libraries
-	for deplib in $save_deplibs; do
-	  deplibs="$deplib $deplibs"
-	done
-      fi
-      if test "$pass" != dlopen; then
-	if test "$pass" != conv; then
-	  # Make sure lib_search_path contains only unique directories.
-	  lib_search_path=
-	  for dir in $newlib_search_path; do
-	    case "$lib_search_path " in
-	    *" $dir "*) ;;
-	    *) lib_search_path="$lib_search_path $dir" ;;
-	    esac
-	  done
-	  newlib_search_path=
+
+# func_emit_wrapper_part1 [arg=no]
+#
+# Emit the first part of a libtool wrapper script on stdout.
+# For more information, see the description associated with
+# func_emit_wrapper(), below.
+func_emit_wrapper_part1 ()
+{
+	func_emit_wrapper_part1_arg1=no
+	if test -n "$1" ; then
+	  func_emit_wrapper_part1_arg1=$1
 	fi
 
-	if test "$linkmode,$pass" != "prog,link"; then
-	  vars="deplibs"
-	else
-	  vars="compile_deplibs finalize_deplibs"
-	fi
-	for var in $vars dependency_libs; do
-	  # Add libraries to $var in reverse order
-	  eval tmp_libs=\"\$$var\"
-	  new_libs=
-	  for deplib in $tmp_libs; do
-	    # FIXME: Pedantically, this is the right thing to do, so
-	    #        that some nasty dependency loop isn't accidentally
-	    #        broken:
-	    #new_libs="$deplib $new_libs"
-	    # Pragmatically, this seems to cause very few problems in
-	    # practice:
-	    case $deplib in
-	    -L*) new_libs="$deplib $new_libs" ;;
-	    -R*) ;;
-	    *)
-	      # And here is the reason: when a library appears more
-	      # than once as an explicit dependence of a library, or
-	      # is implicitly linked in more than once by the
-	      # compiler, it is considered special, and multiple
-	      # occurrences thereof are not removed.  Compare this
-	      # with having the same library being listed as a
-	      # dependency of multiple other libraries: in this case,
-	      # we know (pedantically, we assume) the library does not
-	      # need to be listed more than once, so we keep only the
-	      # last copy.  This is not always right, but it is rare
-	      # enough that we require users that really mean to play
-	      # such unportable linking tricks to link the library
-	      # using -Wl,-lname, so that libtool does not consider it
-	      # for duplicate removal.
-	      case " $specialdeplibs " in
-	      *" $deplib "*) new_libs="$deplib $new_libs" ;;
-	      *)
-		case " $new_libs " in
-		*" $deplib "*) ;;
-		*) new_libs="$deplib $new_libs" ;;
-		esac
-		;;
-	      esac
-	      ;;
-	    esac
-	  done
-	  tmp_libs=
-	  for deplib in $new_libs; do
-	    case $deplib in
-	    -L*)
-	      case " $tmp_libs " in
-	      *" $deplib "*) ;;
-	      *) tmp_libs="$tmp_libs $deplib" ;;
-	      esac
-	      ;;
-	    *) tmp_libs="$tmp_libs $deplib" ;;
-	    esac
-	  done
-	  eval $var=\"$tmp_libs\"
-	done # for var
-      fi
-      # Last step: remove runtime libs from dependency_libs
-      # (they stay in deplibs)
-      tmp_libs=
-      for i in $dependency_libs ; do
-	case " $predeps $postdeps $compiler_lib_search_path " in
-	*" $i "*)
-	  i=""
-	  ;;
-	esac
-	if test -n "$i" ; then
-	  tmp_libs="$tmp_libs $i"
-	fi
-      done
-      dependency_libs=$tmp_libs
-    done # for pass
-    if test "$linkmode" = prog; then
-      dlfiles="$newdlfiles"
-      dlprefiles="$newdlprefiles"
+	$ECHO "\
+#! $SHELL
+
+# $output - temporary wrapper script for $objdir/$outputname
+# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
+#
+# The $output program cannot be directly executed until all the libtool
+# libraries that it depends on are installed.
+#
+# This wrapper script should never be moved out of the build directory.
+# If it is, it will not operate correctly.
+
+# Sed substitution that helps us do robust quoting.  It backslashifies
+# metacharacters that are still active within double-quoted strings.
+Xsed='${SED} -e 1s/^X//'
+sed_quote_subst='$sed_quote_subst'
+
+# Be Bourne compatible
+if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then
+  emulate sh
+  NULLCMD=:
+  # Zsh 3.x and 4.x performs word splitting on \${1+\"\$@\"}, which
+  # is contrary to our usage.  Disable this feature.
+  alias -g '\${1+\"\$@\"}'='\"\$@\"'
+  setopt NO_GLOB_SUBST
+else
+  case \`(set -o) 2>/dev/null\` in *posix*) set -o posix;; esac
+fi
+BIN_SH=xpg4; export BIN_SH # for Tru64
+DUALCASE=1; export DUALCASE # for MKS sh
+
+# The HP-UX ksh and POSIX shell print the target directory to stdout
+# if CDPATH is set.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+relink_command=\"$relink_command\"
+
+# This environment variable determines our operation mode.
+if test \"\$libtool_install_magic\" = \"$magic\"; then
+  # install mode needs the following variables:
+  generated_by_libtool_version='$macro_version'
+  notinst_deplibs='$notinst_deplibs'
+else
+  # When we are sourced in execute mode, \$file and \$ECHO are already set.
+  if test \"\$libtool_execute_magic\" != \"$magic\"; then
+    ECHO=\"$qecho\"
+    file=\"\$0\"
+    # Make sure echo works.
+    if test \"X\$1\" = X--no-reexec; then
+      # Discard the --no-reexec flag, and continue.
+      shift
+    elif test \"X\`{ \$ECHO '\t'; } 2>/dev/null\`\" = 'X\t'; then
+      # Yippee, \$ECHO works!
+      :
+    else
+      # Restart under the correct shell, and then maybe \$ECHO will work.
+      exec $SHELL \"\$0\" --no-reexec \${1+\"\$@\"}
     fi
+  fi\
+"
+	$ECHO "\
 
-    case $linkmode in
-    oldlib)
-      case " $deplibs" in
-      *\ -l* | *\ -L*)
-	$echo "$modename: warning: \`-l' and \`-L' are ignored for archives" 1>&2 ;;
+  # Find the directory that this script lives in.
+  thisdir=\`\$ECHO \"X\$file\" | \$Xsed -e 's%/[^/]*$%%'\`
+  test \"x\$thisdir\" = \"x\$file\" && thisdir=.
+
+  # Follow symbolic links until we get to the real thisdir.
+  file=\`ls -ld \"\$file\" | ${SED} -n 's/.*-> //p'\`
+  while test -n \"\$file\"; do
+    destdir=\`\$ECHO \"X\$file\" | \$Xsed -e 's%/[^/]*\$%%'\`
+
+    # If there was a directory component, then change thisdir.
+    if test \"x\$destdir\" != \"x\$file\"; then
+      case \"\$destdir\" in
+      [\\\\/]* | [A-Za-z]:[\\\\/]*) thisdir=\"\$destdir\" ;;
+      *) thisdir=\"\$thisdir/\$destdir\" ;;
       esac
+    fi
 
-      if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
-	$echo "$modename: warning: \`-dlopen' is ignored for archives" 1>&2
-      fi
+    file=\`\$ECHO \"X\$file\" | \$Xsed -e 's%^.*/%%'\`
+    file=\`ls -ld \"\$thisdir/\$file\" | ${SED} -n 's/.*-> //p'\`
+  done
+"
+}
+# end: func_emit_wrapper_part1
 
-      if test -n "$rpath"; then
-	$echo "$modename: warning: \`-rpath' is ignored for archives" 1>&2
-      fi
+# func_emit_wrapper_part2 [arg=no]
+#
+# Emit the second part of a libtool wrapper script on stdout.
+# For more information, see the description associated with
+# func_emit_wrapper(), below.
+func_emit_wrapper_part2 ()
+{
+	func_emit_wrapper_part2_arg1=no
+	if test -n "$1" ; then
+	  func_emit_wrapper_part2_arg1=$1
+	fi
+
+	$ECHO "\
+
+  # Usually 'no', except on cygwin/mingw when embedded into
+  # the cwrapper.
+  WRAPPER_SCRIPT_BELONGS_IN_OBJDIR=$func_emit_wrapper_part2_arg1
+  if test \"\$WRAPPER_SCRIPT_BELONGS_IN_OBJDIR\" = \"yes\"; then
+    # special case for '.'
+    if test \"\$thisdir\" = \".\"; then
+      thisdir=\`pwd\`
+    fi
+    # remove .libs from thisdir
+    case \"\$thisdir\" in
+    *[\\\\/]$objdir ) thisdir=\`\$ECHO \"X\$thisdir\" | \$Xsed -e 's%[\\\\/][^\\\\/]*$%%'\` ;;
+    $objdir )   thisdir=. ;;
+    esac
+  fi
 
-      if test -n "$xrpath"; then
-	$echo "$modename: warning: \`-R' is ignored for archives" 1>&2
-      fi
+  # Try to get the absolute directory name.
+  absdir=\`cd \"\$thisdir\" && pwd\`
+  test -n \"\$absdir\" && thisdir=\"\$absdir\"
+"
 
-      if test -n "$vinfo"; then
-	$echo "$modename: warning: \`-version-info/-version-number' is ignored for archives" 1>&2
-      fi
+	if test "$fast_install" = yes; then
+	  $ECHO "\
+  program=lt-'$outputname'$exeext
+  progdir=\"\$thisdir/$objdir\"
 
-      if test -n "$release"; then
-	$echo "$modename: warning: \`-release' is ignored for archives" 1>&2
-      fi
+  if test ! -f \"\$progdir/\$program\" ||
+     { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | ${SED} 1q\`; \\
+       test \"X\$file\" != \"X\$progdir/\$program\"; }; then
 
-      if test -n "$export_symbols" || test -n "$export_symbols_regex"; then
-	$echo "$modename: warning: \`-export-symbols' is ignored for archives" 1>&2
-      fi
+    file=\"\$\$-\$program\"
 
-      # Now set the variables for building old libraries.
-      build_libtool_libs=no
-      oldlibs="$output"
-      objs="$objs$old_deplibs"
-      ;;
+    if test ! -d \"\$progdir\"; then
+      $MKDIR \"\$progdir\"
+    else
+      $RM \"\$progdir/\$file\"
+    fi"
 
-    lib)
-      # Make sure we only generate libraries of the form `libNAME.la'.
-      case $outputname in
-      lib*)
-	name=`$echo "X$outputname" | $Xsed -e 's/\.la$//' -e 's/^lib//'`
-	eval shared_ext=\"$shrext_cmds\"
-	eval libname=\"$libname_spec\"
-	;;
-      *)
-	if test "$module" = no; then
-	  $echo "$modename: libtool library \`$output' must begin with \`lib'" 1>&2
-	  $echo "$help" 1>&2
-	  exit $EXIT_FAILURE
-	fi
-	if test "$need_lib_prefix" != no; then
-	  # Add the "lib" prefix for modules if required
-	  name=`$echo "X$outputname" | $Xsed -e 's/\.la$//'`
-	  eval shared_ext=\"$shrext_cmds\"
-	  eval libname=\"$libname_spec\"
-	else
-	  libname=`$echo "X$outputname" | $Xsed -e 's/\.la$//'`
-	fi
-	;;
-      esac
+	  $ECHO "\
 
-      if test -n "$objs"; then
-	if test "$deplibs_check_method" != pass_all; then
-	  $echo "$modename: cannot build libtool library \`$output' from non-libtool objects on this host:$objs" 2>&1
-	  exit $EXIT_FAILURE
+    # relink executable if necessary
+    if test -n \"\$relink_command\"; then
+      if relink_command_output=\`eval \$relink_command 2>&1\`; then :
+      else
+	$ECHO \"\$relink_command_output\" >&2
+	$RM \"\$progdir/\$file\"
+	exit 1
+      fi
+    fi
+
+    $MV \"\$progdir/\$file\" \"\$progdir/\$program\" 2>/dev/null ||
+    { $RM \"\$progdir/\$program\";
+      $MV \"\$progdir/\$file\" \"\$progdir/\$program\"; }
+    $RM \"\$progdir/\$file\"
+  fi"
 	else
-	  $echo
-	  $echo "*** Warning: Linking the shared library $output against the non-libtool"
-	  $echo "*** objects $objs is not portable!"
-	  libobjs="$libobjs $objs"
+	  $ECHO "\
+  program='$outputname'
+  progdir=\"\$thisdir/$objdir\"
+"
 	fi
-      fi
 
-      if test "$dlself" != no; then
-	$echo "$modename: warning: \`-dlopen self' is ignored for libtool libraries" 1>&2
-      fi
+	$ECHO "\
 
-      set dummy $rpath
-      if test "$#" -gt 2; then
-	$echo "$modename: warning: ignoring multiple \`-rpath's for a libtool library" 1>&2
-      fi
-      install_libdir="$2"
+  if test -f \"\$progdir/\$program\"; then"
 
-      oldlibs=
-      if test -z "$rpath"; then
-	if test "$build_libtool_libs" = yes; then
-	  # Building a libtool convenience library.
-	  # Some compilers have problems with a `.al' extension so
-	  # convenience libraries should have the same extension an
-	  # archive normally would.
-	  oldlibs="$output_objdir/$libname.$libext $oldlibs"
-	  build_libtool_libs=convenience
-	  build_old_libs=yes
-	fi
+	# Export our shlibpath_var if we have one.
+	if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
+	  $ECHO "\
+    # Add our own library path to $shlibpath_var
+    $shlibpath_var=\"$temp_rpath\$$shlibpath_var\"
 
-	if test -n "$vinfo"; then
-	  $echo "$modename: warning: \`-version-info/-version-number' is ignored for convenience libraries" 1>&2
-	fi
+    # Some systems cannot cope with colon-terminated $shlibpath_var
+    # The second colon is a workaround for a bug in BeOS R4 sed
+    $shlibpath_var=\`\$ECHO \"X\$$shlibpath_var\" | \$Xsed -e 's/::*\$//'\`
 
-	if test -n "$release"; then
-	  $echo "$modename: warning: \`-release' is ignored for convenience libraries" 1>&2
+    export $shlibpath_var
+"
 	fi
-      else
-
-	# Parse the version information argument.
-	save_ifs="$IFS"; IFS=':'
-	set dummy $vinfo 0 0 0
-	IFS="$save_ifs"
 
-	if test -n "$8"; then
-	  $echo "$modename: too many parameters to \`-version-info'" 1>&2
-	  $echo "$help" 1>&2
-	  exit $EXIT_FAILURE
+	# fixup the dll searchpath if we need to.
+	if test -n "$dllsearchpath"; then
+	  $ECHO "\
+    # Add the dll search path components to the executable PATH
+    PATH=$dllsearchpath:\$PATH
+"
 	fi
 
-	# convert absolute version numbers to libtool ages
-	# this retains compatibility with .la files and attempts
-	# to make the code below a bit more comprehensible
+	$ECHO "\
+    if test \"\$libtool_execute_magic\" != \"$magic\"; then
+      # Run the actual program with our arguments.
+"
+	case $host in
+	# Backslashes separate directories on plain windows
+	*-*-mingw | *-*-os2* | *-cegcc*)
+	  $ECHO "\
+      exec \"\$progdir\\\\\$program\" \${1+\"\$@\"}
+"
+	  ;;
 
-	case $vinfo_number in
-	yes)
-	  number_major="$2"
-	  number_minor="$3"
-	  number_revision="$4"
-	  #
-	  # There are really only two kinds -- those that
-	  # use the current revision as the major version
-	  # and those that subtract age and use age as
-	  # a minor version.  But, then there is irix
-	  # which has an extra 1 added just for fun
-	  #
-	  case $version_type in
-	  darwin|linux|osf|windows|none)
-	    current=`expr $number_major + $number_minor`
-	    age="$number_minor"
-	    revision="$number_revision"
-	    ;;
-	  freebsd-aout|freebsd-elf|sunos)
-	    current="$number_major"
-	    revision="$number_minor"
-	    age="0"
-	    ;;
-	  irix|nonstopux)
-	    current=`expr $number_major + $number_minor`
-	    age="$number_minor"
-	    revision="$number_minor"
-	    lt_irix_increment=no
-	    ;;
-	  esac
-	  ;;
-	no)
-	  current="$2"
-	  revision="$3"
-	  age="$4"
-	  ;;
-	esac
-
-	# Check that each of the things are valid numbers.
-	case $current in
-	0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
-	*)
-	  $echo "$modename: CURRENT \`$current' must be a nonnegative integer" 1>&2
-	  $echo "$modename: \`$vinfo' is not valid version information" 1>&2
-	  exit $EXIT_FAILURE
-	  ;;
-	esac
-
-	case $revision in
-	0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
 	*)
-	  $echo "$modename: REVISION \`$revision' must be a nonnegative integer" 1>&2
-	  $echo "$modename: \`$vinfo' is not valid version information" 1>&2
-	  exit $EXIT_FAILURE
+	  $ECHO "\
+      exec \"\$progdir/\$program\" \${1+\"\$@\"}
+"
 	  ;;
 	esac
+	$ECHO "\
+      \$ECHO \"\$0: cannot exec \$program \$*\" 1>&2
+      exit 1
+    fi
+  else
+    # The program doesn't exist.
+    \$ECHO \"\$0: error: \\\`\$progdir/\$program' does not exist\" 1>&2
+    \$ECHO \"This script is just a wrapper for \$program.\" 1>&2
+    $ECHO \"See the $PACKAGE documentation for more information.\" 1>&2
+    exit 1
+  fi
+fi\
+"
+}
+# end: func_emit_wrapper_part2
 
-	case $age in
-	0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
-	*)
-	  $echo "$modename: AGE \`$age' must be a nonnegative integer" 1>&2
-	  $echo "$modename: \`$vinfo' is not valid version information" 1>&2
-	  exit $EXIT_FAILURE
-	  ;;
-	esac
 
-	if test "$age" -gt "$current"; then
-	  $echo "$modename: AGE \`$age' is greater than the current interface number \`$current'" 1>&2
-	  $echo "$modename: \`$vinfo' is not valid version information" 1>&2
-	  exit $EXIT_FAILURE
+# func_emit_wrapper [arg=no]
+#
+# Emit a libtool wrapper script on stdout.
+# Don't directly open a file because we may want to
+# incorporate the script contents within a cygwin/mingw
+# wrapper executable.  Must ONLY be called from within
+# func_mode_link because it depends on a number of variables
+# set therein.
+#
+# ARG is the value that the WRAPPER_SCRIPT_BELONGS_IN_OBJDIR
+# variable will take.  If 'yes', then the emitted script
+# will assume that the directory in which it is stored is
+# the $objdir directory.  This is a cygwin/mingw-specific
+# behavior.
+func_emit_wrapper ()
+{
+	func_emit_wrapper_arg1=no
+	if test -n "$1" ; then
+	  func_emit_wrapper_arg1=$1
 	fi
 
-	# Calculate the version variables.
-	major=
-	versuffix=
-	verstring=
-	case $version_type in
-	none) ;;
+	# split this up so that func_emit_cwrapperexe_src
+	# can call each part independently.
+	func_emit_wrapper_part1 "${func_emit_wrapper_arg1}"
+	func_emit_wrapper_part2 "${func_emit_wrapper_arg1}"
+}
 
-	darwin)
-	  # Like Linux, but with the current version available in
-	  # verstring for coding it into the library header
-	  major=.`expr $current - $age`
-	  versuffix="$major.$age.$revision"
-	  # Darwin ld doesn't like 0 for these options...
-	  minor_current=`expr $current + 1`
-	  xlcverstring="${wl}-compatibility_version ${wl}$minor_current ${wl}-current_version ${wl}$minor_current.$revision"
-	  verstring="-compatibility_version $minor_current -current_version $minor_current.$revision"
-	  ;;
 
-	freebsd-aout)
-	  major=".$current"
-	  versuffix=".$current.$revision";
-	  ;;
+# func_to_host_path arg
+#
+# Convert paths to host format when used with build tools.
+# Intended for use with "native" mingw (where libtool itself
+# is running under the msys shell), or in the following cross-
+# build environments:
+#    $build          $host
+#    mingw (msys)    mingw  [e.g. native]
+#    cygwin          mingw
+#    *nix + wine     mingw
+# where wine is equipped with the `winepath' executable.
+# In the native mingw case, the (msys) shell automatically
+# converts paths for any non-msys applications it launches,
+# but that facility isn't available from inside the cwrapper.
+# Similar accommodations are necessary for $host mingw and
+# $build cygwin.  Calling this function does no harm for other
+# $host/$build combinations not listed above.
+#
+# ARG is the path (on $build) that should be converted to
+# the proper representation for $host. The result is stored
+# in $func_to_host_path_result.
+func_to_host_path ()
+{
+  func_to_host_path_result="$1"
+  if test -n "$1" ; then
+    case $host in
+      *mingw* )
+        lt_sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g'
+        case $build in
+          *mingw* ) # actually, msys
+            # awkward: cmd appends spaces to result
+            lt_sed_strip_trailing_spaces="s/[ ]*\$//"
+            func_to_host_path_tmp1=`( cmd //c echo "$1" |\
+              $SED -e "$lt_sed_strip_trailing_spaces" ) 2>/dev/null || echo ""`
+            func_to_host_path_result=`echo "$func_to_host_path_tmp1" |\
+              $SED -e "$lt_sed_naive_backslashify"`
+            ;;
+          *cygwin* )
+            func_to_host_path_tmp1=`cygpath -w "$1"`
+            func_to_host_path_result=`echo "$func_to_host_path_tmp1" |\
+              $SED -e "$lt_sed_naive_backslashify"`
+            ;;
+          * )
+            # Unfortunately, winepath does not exit with a non-zero
+            # error code, so we are forced to check the contents of
+            # stdout. On the other hand, if the command is not
+            # found, the shell will set an exit code of 127 and print
+            # *an error message* to stdout. So we must check for both
+            # error code of zero AND non-empty stdout, which explains
+            # the odd construction:
+            func_to_host_path_tmp1=`winepath -w "$1" 2>/dev/null`
+            if test "$?" -eq 0 && test -n "${func_to_host_path_tmp1}"; then
+              func_to_host_path_result=`echo "$func_to_host_path_tmp1" |\
+                $SED -e "$lt_sed_naive_backslashify"`
+            else
+              # Allow warning below.
+              func_to_host_path_result=""
+            fi
+            ;;
+        esac
+        if test -z "$func_to_host_path_result" ; then
+          func_error "Could not determine host path corresponding to"
+          func_error "  '$1'"
+          func_error "Continuing, but uninstalled executables may not work."
+          # Fallback:
+          func_to_host_path_result="$1"
+        fi
+        ;;
+    esac
+  fi
+}
+# end: func_to_host_path
 
-	freebsd-elf)
-	  major=".$current"
-	  versuffix=".$current";
-	  ;;
+# func_to_host_pathlist arg
+#
+# Convert pathlists to host format when used with build tools.
+# See func_to_host_path(), above. This function supports the
+# following $build/$host combinations (but does no harm for
+# combinations not listed here):
+#    $build          $host
+#    mingw (msys)    mingw  [e.g. native]
+#    cygwin          mingw
+#    *nix + wine     mingw
+#
+# Path separators are also converted from $build format to
+# $host format. If ARG begins or ends with a path separator
+# character, it is preserved (but converted to $host format)
+# on output.
+#
+# ARG is a pathlist (on $build) that should be converted to
+# the proper representation on $host. The result is stored
+# in $func_to_host_pathlist_result.
+func_to_host_pathlist ()
+{
+  func_to_host_pathlist_result="$1"
+  if test -n "$1" ; then
+    case $host in
+      *mingw* )
+        lt_sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g'
+        # Remove leading and trailing path separator characters from
+        # ARG. msys behavior is inconsistent here, cygpath turns them
+        # into '.;' and ';.', and winepath ignores them completely.
+        func_to_host_pathlist_tmp2="$1"
+        # Once set for this call, this variable should not be
+        # reassigned. It is used in tha fallback case.
+        func_to_host_pathlist_tmp1=`echo "$func_to_host_pathlist_tmp2" |\
+          $SED -e 's|^:*||' -e 's|:*$||'`
+        case $build in
+          *mingw* ) # Actually, msys.
+            # Awkward: cmd appends spaces to result.
+            lt_sed_strip_trailing_spaces="s/[ ]*\$//"
+            func_to_host_pathlist_tmp2=`( cmd //c echo "$func_to_host_pathlist_tmp1" |\
+              $SED -e "$lt_sed_strip_trailing_spaces" ) 2>/dev/null || echo ""`
+            func_to_host_pathlist_result=`echo "$func_to_host_pathlist_tmp2" |\
+              $SED -e "$lt_sed_naive_backslashify"`
+            ;;
+          *cygwin* )
+            func_to_host_pathlist_tmp2=`cygpath -w -p "$func_to_host_pathlist_tmp1"`
+            func_to_host_pathlist_result=`echo "$func_to_host_pathlist_tmp2" |\
+              $SED -e "$lt_sed_naive_backslashify"`
+            ;;
+          * )
+            # unfortunately, winepath doesn't convert pathlists
+            func_to_host_pathlist_result=""
+            func_to_host_pathlist_oldIFS=$IFS
+            IFS=:
+            for func_to_host_pathlist_f in $func_to_host_pathlist_tmp1 ; do
+              IFS=$func_to_host_pathlist_oldIFS
+              if test -n "$func_to_host_pathlist_f" ; then
+                func_to_host_path "$func_to_host_pathlist_f"
+                if test -n "$func_to_host_path_result" ; then
+                  if test -z "$func_to_host_pathlist_result" ; then
+                    func_to_host_pathlist_result="$func_to_host_path_result"
+                  else
+                    func_to_host_pathlist_result="$func_to_host_pathlist_result;$func_to_host_path_result"
+                  fi
+                fi
+              fi
+              IFS=:
+            done
+            IFS=$func_to_host_pathlist_oldIFS
+            ;;
+        esac
+        if test -z "$func_to_host_pathlist_result" ; then
+          func_error "Could not determine the host path(s) corresponding to"
+          func_error "  '$1'"
+          func_error "Continuing, but uninstalled executables may not work."
+          # Fallback. This may break if $1 contains DOS-style drive
+          # specifications. The fix is not to complicate the expression
+          # below, but for the user to provide a working wine installation
+          # with winepath so that path translation in the cross-to-mingw
+          # case works properly.
+          lt_replace_pathsep_nix_to_dos="s|:|;|g"
+          func_to_host_pathlist_result=`echo "$func_to_host_pathlist_tmp1" |\
+            $SED -e "$lt_replace_pathsep_nix_to_dos"`
+        fi
+        # Now, add the leading and trailing path separators back
+        case "$1" in
+          :* ) func_to_host_pathlist_result=";$func_to_host_pathlist_result"
+            ;;
+        esac
+        case "$1" in
+          *: ) func_to_host_pathlist_result="$func_to_host_pathlist_result;"
+            ;;
+        esac
+        ;;
+    esac
+  fi
+}
+# end: func_to_host_pathlist
 
-	irix | nonstopux)
-	  if test "X$lt_irix_increment" = "Xno"; then
-	    major=`expr $current - $age`
-	  else
-	    major=`expr $current - $age + 1`
-	  fi
-	  case $version_type in
-	    nonstopux) verstring_prefix=nonstopux ;;
-	    *)         verstring_prefix=sgi ;;
-	  esac
-	  verstring="$verstring_prefix$major.$revision"
+# func_emit_cwrapperexe_src
+# emit the source code for a wrapper executable on stdout
+# Must ONLY be called from within func_mode_link because
+# it depends on a number of variable set therein.
+func_emit_cwrapperexe_src ()
+{
+	cat <<EOF
 
-	  # Add in all the interfaces that we are compatible with.
-	  loop=$revision
-	  while test "$loop" -ne 0; do
-	    iface=`expr $revision - $loop`
-	    loop=`expr $loop - 1`
-	    verstring="$verstring_prefix$major.$iface:$verstring"
-	  done
+/* $cwrappersource - temporary wrapper executable for $objdir/$outputname
+   Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
 
-	  # Before this point, $major must not contain `.'.
-	  major=.$major
-	  versuffix="$major.$revision"
-	  ;;
+   The $output program cannot be directly executed until all the libtool
+   libraries that it depends on are installed.
 
-	linux)
-	  major=.`expr $current - $age`
-	  versuffix="$major.$age.$revision"
-	  ;;
+   This wrapper executable should never be moved out of the build directory.
+   If it is, it will not operate correctly.
 
-	osf)
-	  major=.`expr $current - $age`
-	  versuffix=".$current.$age.$revision"
-	  verstring="$current.$age.$revision"
+   Currently, it simply execs the wrapper *script* "$SHELL $output",
+   but could eventually absorb all of the scripts functionality and
+   exec $objdir/$outputname directly.
+*/
+EOF
+	    cat <<"EOF"
+#include <stdio.h>
+#include <stdlib.h>
+#ifdef _MSC_VER
+# include <direct.h>
+# include <process.h>
+# include <io.h>
+# define setmode _setmode
+#else
+# include <unistd.h>
+# include <stdint.h>
+# ifdef __CYGWIN__
+#  include <io.h>
+#  define HAVE_SETENV
+#  ifdef __STRICT_ANSI__
+char *realpath (const char *, char *);
+int putenv (char *);
+int setenv (const char *, const char *, int);
+#  endif
+# endif
+#endif
+#include <malloc.h>
+#include <stdarg.h>
+#include <assert.h>
+#include <string.h>
+#include <ctype.h>
+#include <errno.h>
+#include <fcntl.h>
+#include <sys/stat.h>
 
-	  # Add in all the interfaces that we are compatible with.
-	  loop=$age
-	  while test "$loop" -ne 0; do
-	    iface=`expr $current - $loop`
-	    loop=`expr $loop - 1`
-	    verstring="$verstring:${iface}.0"
-	  done
+#if defined(PATH_MAX)
+# define LT_PATHMAX PATH_MAX
+#elif defined(MAXPATHLEN)
+# define LT_PATHMAX MAXPATHLEN
+#else
+# define LT_PATHMAX 1024
+#endif
 
-	  # Make executables depend on our current version.
-	  verstring="$verstring:${current}.0"
-	  ;;
+#ifndef S_IXOTH
+# define S_IXOTH 0
+#endif
+#ifndef S_IXGRP
+# define S_IXGRP 0
+#endif
 
-	sunos)
-	  major=".$current"
-	  versuffix=".$current.$revision"
-	  ;;
+#ifdef _MSC_VER
+# define S_IXUSR _S_IEXEC
+# define stat _stat
+# ifndef _INTPTR_T_DEFINED
+#  define intptr_t int
+# endif
+#endif
 
-	windows)
-	  # Use '-' rather than '.', since we only want one
-	  # extension on DOS 8.3 filesystems.
-	  major=`expr $current - $age`
-	  versuffix="-$major"
-	  ;;
+#ifndef DIR_SEPARATOR
+# define DIR_SEPARATOR '/'
+# define PATH_SEPARATOR ':'
+#endif
 
-	*)
-	  $echo "$modename: unknown library version type \`$version_type'" 1>&2
-	  $echo "Fatal configuration error.  See the $PACKAGE docs for more information." 1>&2
-	  exit $EXIT_FAILURE
-	  ;;
-	esac
+#if defined (_WIN32) || defined (__MSDOS__) || defined (__DJGPP__) || \
+  defined (__OS2__)
+# define HAVE_DOS_BASED_FILE_SYSTEM
+# define FOPEN_WB "wb"
+# ifndef DIR_SEPARATOR_2
+#  define DIR_SEPARATOR_2 '\\'
+# endif
+# ifndef PATH_SEPARATOR_2
+#  define PATH_SEPARATOR_2 ';'
+# endif
+#endif
 
-	# Clear the version info if we defaulted, and they specified a release.
-	if test -z "$vinfo" && test -n "$release"; then
-	  major=
-	  case $version_type in
-	  darwin)
-	    # we can't check for "0.0" in archive_cmds due to quoting
-	    # problems, so we reset it completely
-	    verstring=
-	    ;;
-	  *)
-	    verstring="0.0"
-	    ;;
-	  esac
-	  if test "$need_version" = no; then
-	    versuffix=
-	  else
-	    versuffix=".0.0"
-	  fi
-	fi
+#ifndef DIR_SEPARATOR_2
+# define IS_DIR_SEPARATOR(ch) ((ch) == DIR_SEPARATOR)
+#else /* DIR_SEPARATOR_2 */
+# define IS_DIR_SEPARATOR(ch) \
+	(((ch) == DIR_SEPARATOR) || ((ch) == DIR_SEPARATOR_2))
+#endif /* DIR_SEPARATOR_2 */
 
-	# Remove version info from name if versioning should be avoided
-	if test "$avoid_version" = yes && test "$need_version" = no; then
-	  major=
-	  versuffix=
-	  verstring=""
-	fi
+#ifndef PATH_SEPARATOR_2
+# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR)
+#else /* PATH_SEPARATOR_2 */
+# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR_2)
+#endif /* PATH_SEPARATOR_2 */
 
-	# Check to see if the archive will have undefined symbols.
-	if test "$allow_undefined" = yes; then
-	  if test "$allow_undefined_flag" = unsupported; then
-	    $echo "$modename: warning: undefined symbols not allowed in $host shared libraries" 1>&2
-	    build_libtool_libs=no
-	    build_old_libs=yes
-	  fi
-	else
-	  # Don't allow undefined symbols.
-	  allow_undefined_flag="$no_undefined_flag"
-	fi
-      fi
+#ifdef __CYGWIN__
+# define FOPEN_WB "wb"
+#endif
 
-      if test "$mode" != relink; then
-	# Remove our outputs, but don't remove object files since they
-	# may have been created when compiling PIC objects.
-	removelist=
-	tempremovelist=`$echo "$output_objdir/*"`
-	for p in $tempremovelist; do
-	  case $p in
-	    *.$objext)
-	       ;;
-	    $output_objdir/$outputname | $output_objdir/$libname.* | $output_objdir/${libname}${release}.*)
-	       if test "X$precious_files_regex" != "X"; then
-	         if echo $p | $EGREP -e "$precious_files_regex" >/dev/null 2>&1
-	         then
-		   continue
-		 fi
-	       fi
-	       removelist="$removelist $p"
-	       ;;
-	    *) ;;
-	  esac
-	done
-	if test -n "$removelist"; then
-	  $show "${rm}r $removelist"
-	  $run ${rm}r $removelist
-	fi
-      fi
+#ifndef FOPEN_WB
+# define FOPEN_WB "w"
+#endif
+#ifndef _O_BINARY
+# define _O_BINARY 0
+#endif
 
-      # Now set the variables for building old libraries.
-      if test "$build_old_libs" = yes && test "$build_libtool_libs" != convenience ; then
-	oldlibs="$oldlibs $output_objdir/$libname.$libext"
+#define XMALLOC(type, num)      ((type *) xmalloc ((num) * sizeof(type)))
+#define XFREE(stale) do { \
+  if (stale) { free ((void *) stale); stale = 0; } \
+} while (0)
 
-	# Transform .lo files to .o files.
-	oldobjs="$objs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}'$/d' -e "$lo2o" | $NL2SP`
-      fi
+#undef LTWRAPPER_DEBUGPRINTF
+#if defined DEBUGWRAPPER
+# define LTWRAPPER_DEBUGPRINTF(args) ltwrapper_debugprintf args
+static void
+ltwrapper_debugprintf (const char *fmt, ...)
+{
+    va_list args;
+    va_start (args, fmt);
+    (void) vfprintf (stderr, fmt, args);
+    va_end (args);
+}
+#else
+# define LTWRAPPER_DEBUGPRINTF(args)
+#endif
 
-      # Eliminate all temporary directories.
-      #for path in $notinst_path; do
-      #	lib_search_path=`$echo "$lib_search_path " | ${SED} -e "s% $path % %g"`
-      #	deplibs=`$echo "$deplibs " | ${SED} -e "s% -L$path % %g"`
-      #	dependency_libs=`$echo "$dependency_libs " | ${SED} -e "s% -L$path % %g"`
-      #done
+const char *program_name = NULL;
 
-      if test -n "$xrpath"; then
-	# If the user specified any rpath flags, then add them.
-	temp_xrpath=
-	for libdir in $xrpath; do
-	  temp_xrpath="$temp_xrpath -R$libdir"
-	  case "$finalize_rpath " in
-	  *" $libdir "*) ;;
-	  *) finalize_rpath="$finalize_rpath $libdir" ;;
-	  esac
-	done
-	if test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes; then
-	  dependency_libs="$temp_xrpath $dependency_libs"
-	fi
-      fi
+void *xmalloc (size_t num);
+char *xstrdup (const char *string);
+const char *base_name (const char *name);
+char *find_executable (const char *wrapper);
+char *chase_symlinks (const char *pathspec);
+int make_executable (const char *path);
+int check_executable (const char *path);
+char *strendzap (char *str, const char *pat);
+void lt_fatal (const char *message, ...);
+void lt_setenv (const char *name, const char *value);
+char *lt_extend_str (const char *orig_value, const char *add, int to_end);
+void lt_opt_process_env_set (const char *arg);
+void lt_opt_process_env_prepend (const char *arg);
+void lt_opt_process_env_append (const char *arg);
+int lt_split_name_value (const char *arg, char** name, char** value);
+void lt_update_exe_path (const char *name, const char *value);
+void lt_update_lib_path (const char *name, const char *value);
 
-      # Make sure dlfiles contains only unique files that won't be dlpreopened
-      old_dlfiles="$dlfiles"
-      dlfiles=
-      for lib in $old_dlfiles; do
-	case " $dlprefiles $dlfiles " in
-	*" $lib "*) ;;
-	*) dlfiles="$dlfiles $lib" ;;
-	esac
-      done
+static const char *script_text_part1 =
+EOF
 
-      # Make sure dlprefiles contains only unique files
-      old_dlprefiles="$dlprefiles"
-      dlprefiles=
-      for lib in $old_dlprefiles; do
-	case "$dlprefiles " in
-	*" $lib "*) ;;
-	*) dlprefiles="$dlprefiles $lib" ;;
-	esac
-      done
+	    func_emit_wrapper_part1 yes |
+	        $SED -e 's/\([\\"]\)/\\\1/g' \
+	             -e 's/^/  "/' -e 's/$/\\n"/'
+	    echo ";"
+	    cat <<EOF
 
-      if test "$build_libtool_libs" = yes; then
-	if test -n "$rpath"; then
-	  case $host in
-	  *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos*)
-	    # these systems don't actually have a c library (as such)!
-	    ;;
-	  *-*-rhapsody* | *-*-darwin1.[012])
-	    # Rhapsody C library is in the System framework
-	    deplibs="$deplibs -framework System"
-	    ;;
-	  *-*-netbsd*)
-	    # Don't link with libc until the a.out ld.so is fixed.
-	    ;;
-	  *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
-	    # Do not include libc due to us having libc/libc_r.
-	    ;;
-	  *-*-sco3.2v5* | *-*-sco5v6*)
-	    # Causes problems with __ctype
-	    ;;
-	  *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*)
-	    # Compiler inserts libc in the correct place for threads to work
-	    ;;
- 	  *)
-	    # Add libc to deplibs on all other systems if necessary.
-	    if test "$build_libtool_need_lc" = "yes"; then
-	      deplibs="$deplibs -lc"
+static const char *script_text_part2 =
+EOF
+	    func_emit_wrapper_part2 yes |
+	        $SED -e 's/\([\\"]\)/\\\1/g' \
+	             -e 's/^/  "/' -e 's/$/\\n"/'
+	    echo ";"
+
+	    cat <<EOF
+const char * MAGIC_EXE = "$magic_exe";
+const char * LIB_PATH_VARNAME = "$shlibpath_var";
+EOF
+
+	    if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
+              func_to_host_pathlist "$temp_rpath"
+	      cat <<EOF
+const char * LIB_PATH_VALUE   = "$func_to_host_pathlist_result";
+EOF
+	    else
+	      cat <<"EOF"
+const char * LIB_PATH_VALUE   = "";
+EOF
 	    fi
-	    ;;
-	  esac
-	fi
 
-	# Transform deplibs into only deplibs that can be linked in shared.
-	name_save=$name
-	libname_save=$libname
-	release_save=$release
-	versuffix_save=$versuffix
-	major_save=$major
-	# I'm not sure if I'm treating the release correctly.  I think
-	# release should show up in the -l (ie -lgmp5) so we don't want to
-	# add it in twice.  Is that correct?
-	release=""
-	versuffix=""
-	major=""
-	newdeplibs=
-	droppeddeps=no
-	case $deplibs_check_method in
-	pass_all)
-	  # Don't check for shared/static.  Everything works.
-	  # This might be a little naive.  We might want to check
-	  # whether the library exists or not.  But this is on
-	  # osf3 & osf4 and I'm not really sure... Just
-	  # implementing what was already the behavior.
-	  newdeplibs=$deplibs
-	  ;;
-	test_compile)
-	  # This code stresses the "libraries are programs" paradigm to its
-	  # limits. Maybe even breaks it.  We compile a program, linking it
-	  # against the deplibs as a proxy for the library.  Then we can check
-	  # whether they linked in statically or dynamically with ldd.
-	  $rm conftest.c
-	  cat > conftest.c <<EOF
-	  int main() { return 0; }
+	    if test -n "$dllsearchpath"; then
+              func_to_host_pathlist "$dllsearchpath:"
+	      cat <<EOF
+const char * EXE_PATH_VARNAME = "PATH";
+const char * EXE_PATH_VALUE   = "$func_to_host_pathlist_result";
 EOF
-	  $rm conftest
-	  if $LTCC $LTCFLAGS -o conftest conftest.c $deplibs; then
-	    ldd_output=`ldd conftest`
-	    for i in $deplibs; do
-	      name=`expr $i : '-l\(.*\)'`
-	      # If $name is empty we are operating on a -L argument.
-              if test "$name" != "" && test "$name" != "0"; then
-		if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
-		  case " $predeps $postdeps " in
-		  *" $i "*)
-		    newdeplibs="$newdeplibs $i"
-		    i=""
-		    ;;
-		  esac
-	        fi
-		if test -n "$i" ; then
-		  libname=`eval \\$echo \"$libname_spec\"`
-		  deplib_matches=`eval \\$echo \"$library_names_spec\"`
-		  set dummy $deplib_matches
-		  deplib_match=$2
-		  if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
-		    newdeplibs="$newdeplibs $i"
-		  else
-		    droppeddeps=yes
-		    $echo
-		    $echo "*** Warning: dynamic linker does not accept needed library $i."
-		    $echo "*** I have the capability to make that library automatically link in when"
-		    $echo "*** you link to this library.  But I can only do this if you have a"
-		    $echo "*** shared version of the library, which I believe you do not have"
-		    $echo "*** because a test_compile did reveal that the linker did not use it for"
-		    $echo "*** its dynamic dependency list that programs get resolved with at runtime."
-		  fi
-		fi
-	      else
-		newdeplibs="$newdeplibs $i"
-	      fi
-	    done
-	  else
-	    # Error occurred in the first compile.  Let's try to salvage
-	    # the situation: Compile a separate program for each library.
-	    for i in $deplibs; do
-	      name=`expr $i : '-l\(.*\)'`
-	      # If $name is empty we are operating on a -L argument.
-              if test "$name" != "" && test "$name" != "0"; then
-		$rm conftest
-		if $LTCC $LTCFLAGS -o conftest conftest.c $i; then
-		  ldd_output=`ldd conftest`
-		  if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
-		    case " $predeps $postdeps " in
-		    *" $i "*)
-		      newdeplibs="$newdeplibs $i"
-		      i=""
-		      ;;
-		    esac
-		  fi
-		  if test -n "$i" ; then
-		    libname=`eval \\$echo \"$libname_spec\"`
-		    deplib_matches=`eval \\$echo \"$library_names_spec\"`
-		    set dummy $deplib_matches
-		    deplib_match=$2
-		    if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
-		      newdeplibs="$newdeplibs $i"
-		    else
-		      droppeddeps=yes
-		      $echo
-		      $echo "*** Warning: dynamic linker does not accept needed library $i."
-		      $echo "*** I have the capability to make that library automatically link in when"
-		      $echo "*** you link to this library.  But I can only do this if you have a"
-		      $echo "*** shared version of the library, which you do not appear to have"
-		      $echo "*** because a test_compile did reveal that the linker did not use this one"
-		      $echo "*** as a dynamic dependency that programs can get resolved with at runtime."
-		    fi
-		  fi
-		else
-		  droppeddeps=yes
-		  $echo
-		  $echo "*** Warning!  Library $i is needed by this library but I was not able to"
-		  $echo "*** make it link in!  You will probably need to install it or some"
-		  $echo "*** library that it depends on before this library will be fully"
-		  $echo "*** functional.  Installing it before continuing would be even better."
-		fi
-	      else
-		newdeplibs="$newdeplibs $i"
-	      fi
-	    done
-	  fi
-	  ;;
-	file_magic*)
-	  set dummy $deplibs_check_method
-	  file_magic_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"`
-	  for a_deplib in $deplibs; do
-	    name=`expr $a_deplib : '-l\(.*\)'`
-	    # If $name is empty we are operating on a -L argument.
-            if test "$name" != "" && test  "$name" != "0"; then
-	      if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
-		case " $predeps $postdeps " in
-		*" $a_deplib "*)
-		  newdeplibs="$newdeplibs $a_deplib"
-		  a_deplib=""
-		  ;;
-		esac
-	      fi
-	      if test -n "$a_deplib" ; then
-		libname=`eval \\$echo \"$libname_spec\"`
-		for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
-		  potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
-		  for potent_lib in $potential_libs; do
-		      # Follow soft links.
-		      if ls -lLd "$potent_lib" 2>/dev/null \
-			 | grep " -> " >/dev/null; then
-			continue
-		      fi
-		      # The statement above tries to avoid entering an
-		      # endless loop below, in case of cyclic links.
-		      # We might still enter an endless loop, since a link
-		      # loop can be closed while we follow links,
-		      # but so what?
-		      potlib="$potent_lib"
-		      while test -h "$potlib" 2>/dev/null; do
-			potliblink=`ls -ld $potlib | ${SED} 's/.* -> //'`
-			case $potliblink in
-			[\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";;
-			*) potlib=`$echo "X$potlib" | $Xsed -e 's,[^/]*$,,'`"$potliblink";;
-			esac
-		      done
-		      if eval $file_magic_cmd \"\$potlib\" 2>/dev/null \
-			 | ${SED} 10q \
-			 | $EGREP "$file_magic_regex" > /dev/null; then
-			newdeplibs="$newdeplibs $a_deplib"
-			a_deplib=""
-			break 2
-		      fi
-		  done
-		done
-	      fi
-	      if test -n "$a_deplib" ; then
-		droppeddeps=yes
-		$echo
-		$echo "*** Warning: linker path does not have real file for library $a_deplib."
-		$echo "*** I have the capability to make that library automatically link in when"
-		$echo "*** you link to this library.  But I can only do this if you have a"
-		$echo "*** shared version of the library, which you do not appear to have"
-		$echo "*** because I did check the linker path looking for a file starting"
-		if test -z "$potlib" ; then
-		  $echo "*** with $libname but no candidates were found. (...for file magic test)"
-		else
-		  $echo "*** with $libname and none of the candidates passed a file format test"
-		  $echo "*** using a file magic. Last file checked: $potlib"
-		fi
-	      fi
 	    else
-	      # Add a -L argument.
-	      newdeplibs="$newdeplibs $a_deplib"
+	      cat <<"EOF"
+const char * EXE_PATH_VARNAME = "";
+const char * EXE_PATH_VALUE   = "";
+EOF
 	    fi
-	  done # Gone through all deplibs.
-	  ;;
-	match_pattern*)
-	  set dummy $deplibs_check_method
-	  match_pattern_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"`
-	  for a_deplib in $deplibs; do
-	    name=`expr $a_deplib : '-l\(.*\)'`
-	    # If $name is empty we are operating on a -L argument.
-	    if test -n "$name" && test "$name" != "0"; then
-	      if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
-		case " $predeps $postdeps " in
-		*" $a_deplib "*)
-		  newdeplibs="$newdeplibs $a_deplib"
-		  a_deplib=""
-		  ;;
-		esac
-	      fi
-	      if test -n "$a_deplib" ; then
-		libname=`eval \\$echo \"$libname_spec\"`
-		for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
-		  potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
-		  for potent_lib in $potential_libs; do
-		    potlib="$potent_lib" # see symlink-check above in file_magic test
-		    if eval $echo \"$potent_lib\" 2>/dev/null \
-		        | ${SED} 10q \
-		        | $EGREP "$match_pattern_regex" > /dev/null; then
-		      newdeplibs="$newdeplibs $a_deplib"
-		      a_deplib=""
-		      break 2
-		    fi
-		  done
-		done
-	      fi
-	      if test -n "$a_deplib" ; then
-		droppeddeps=yes
-		$echo
-		$echo "*** Warning: linker path does not have real file for library $a_deplib."
-		$echo "*** I have the capability to make that library automatically link in when"
-		$echo "*** you link to this library.  But I can only do this if you have a"
-		$echo "*** shared version of the library, which you do not appear to have"
-		$echo "*** because I did check the linker path looking for a file starting"
-		if test -z "$potlib" ; then
-		  $echo "*** with $libname but no candidates were found. (...for regex pattern test)"
-		else
-		  $echo "*** with $libname and none of the candidates passed a file format test"
-		  $echo "*** using a regex pattern. Last file checked: $potlib"
-		fi
-	      fi
-	    else
-	      # Add a -L argument.
-	      newdeplibs="$newdeplibs $a_deplib"
-	    fi
-	  done # Gone through all deplibs.
-	  ;;
-	none | unknown | *)
-	  newdeplibs=""
-	  tmp_deplibs=`$echo "X $deplibs" | $Xsed -e 's/ -lc$//' \
-	    -e 's/ -[LR][^ ]*//g'`
-	  if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
-	    for i in $predeps $postdeps ; do
-	      # can't use Xsed below, because $i might contain '/'
-	      tmp_deplibs=`$echo "X $tmp_deplibs" | ${SED} -e "1s,^X,," -e "s,$i,,"`
-	    done
-	  fi
-	  if $echo "X $tmp_deplibs" | $Xsed -e 's/[ 	]//g' \
-	    | grep . >/dev/null; then
-	    $echo
-	    if test "X$deplibs_check_method" = "Xnone"; then
-	      $echo "*** Warning: inter-library dependencies are not supported in this platform."
-	    else
-	      $echo "*** Warning: inter-library dependencies are not known to be supported."
-	    fi
-	    $echo "*** All declared inter-library dependencies are being dropped."
-	    droppeddeps=yes
-	  fi
-	  ;;
-	esac
-	versuffix=$versuffix_save
-	major=$major_save
-	release=$release_save
-	libname=$libname_save
-	name=$name_save
-
-	case $host in
-	*-*-rhapsody* | *-*-darwin1.[012])
-	  # On Rhapsody replace the C library is the System framework
-	  newdeplibs=`$echo "X $newdeplibs" | $Xsed -e 's/ -lc / -framework System /'`
-	  ;;
-	esac
 
-	if test "$droppeddeps" = yes; then
-	  if test "$module" = yes; then
-	    $echo
-	    $echo "*** Warning: libtool could not satisfy all declared inter-library"
-	    $echo "*** dependencies of module $libname.  Therefore, libtool will create"
-	    $echo "*** a static module, that should work as long as the dlopening"
-	    $echo "*** application is linked with the -dlopen flag."
-	    if test -z "$global_symbol_pipe"; then
-	      $echo
-	      $echo "*** However, this would only work if libtool was able to extract symbol"
-	      $echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
-	      $echo "*** not find such a program.  So, this module is probably useless."
-	      $echo "*** \`nm' from GNU binutils and a full rebuild may help."
-	    fi
-	    if test "$build_old_libs" = no; then
-	      oldlibs="$output_objdir/$libname.$libext"
-	      build_libtool_libs=module
-	      build_old_libs=yes
+	    if test "$fast_install" = yes; then
+	      cat <<EOF
+const char * TARGET_PROGRAM_NAME = "lt-$outputname"; /* hopefully, no .exe */
+EOF
 	    else
-	      build_libtool_libs=no
+	      cat <<EOF
+const char * TARGET_PROGRAM_NAME = "$outputname"; /* hopefully, no .exe */
+EOF
 	    fi
-	  else
-	    $echo "*** The inter-library dependencies that have been dropped here will be"
-	    $echo "*** automatically added whenever a program is linked with this library"
-	    $echo "*** or is declared to -dlopen it."
 
-	    if test "$allow_undefined" = no; then
-	      $echo
-	      $echo "*** Since this library must not contain undefined symbols,"
-	      $echo "*** because either the platform does not support them or"
-	      $echo "*** it was explicitly requested with -no-undefined,"
-	      $echo "*** libtool will only create a static version of it."
-	      if test "$build_old_libs" = no; then
-		oldlibs="$output_objdir/$libname.$libext"
-		build_libtool_libs=module
-		build_old_libs=yes
-	      else
-		build_libtool_libs=no
-	      fi
-	    fi
-	  fi
-	fi
-	# Done checking deplibs!
-	deplibs=$newdeplibs
-      fi
 
+	    cat <<"EOF"
 
-      # move library search paths that coincide with paths to not yet
-      # installed libraries to the beginning of the library search list
-      new_libs=
-      for path in $notinst_path; do
-	case " $new_libs " in
-	*" -L$path/$objdir "*) ;;
-	*)
-	  case " $deplibs " in
-	  *" -L$path/$objdir "*)
-	    new_libs="$new_libs -L$path/$objdir" ;;
-	  esac
-	  ;;
-	esac
-      done
-      for deplib in $deplibs; do
-	case $deplib in
-	-L*)
-	  case " $new_libs " in
-	  *" $deplib "*) ;;
-	  *) new_libs="$new_libs $deplib" ;;
-	  esac
-	  ;;
-	*) new_libs="$new_libs $deplib" ;;
-	esac
-      done
-      deplibs="$new_libs"
+#define LTWRAPPER_OPTION_PREFIX         "--lt-"
+#define LTWRAPPER_OPTION_PREFIX_LENGTH  5
 
+static const size_t opt_prefix_len         = LTWRAPPER_OPTION_PREFIX_LENGTH;
+static const char *ltwrapper_option_prefix = LTWRAPPER_OPTION_PREFIX;
 
-      # All the library-specific variables (install_libdir is set above).
-      library_names=
-      old_library=
-      dlname=
+static const char *dumpscript_opt       = LTWRAPPER_OPTION_PREFIX "dump-script";
 
-      # Test again, we may have decided not to build it any more
-      if test "$build_libtool_libs" = yes; then
-	if test "$hardcode_into_libs" = yes; then
-	  # Hardcode the library paths
-	  hardcode_libdirs=
-	  dep_rpath=
-	  rpath="$finalize_rpath"
-	  test "$mode" != relink && rpath="$compile_rpath$rpath"
-	  for libdir in $rpath; do
-	    if test -n "$hardcode_libdir_flag_spec"; then
-	      if test -n "$hardcode_libdir_separator"; then
-		if test -z "$hardcode_libdirs"; then
-		  hardcode_libdirs="$libdir"
-		else
-		  # Just accumulate the unique libdirs.
-		  case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
-		  *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
-		    ;;
-		  *)
-		    hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
-		    ;;
-		  esac
-		fi
-	      else
-		eval flag=\"$hardcode_libdir_flag_spec\"
-		dep_rpath="$dep_rpath $flag"
-	      fi
-	    elif test -n "$runpath_var"; then
-	      case "$perm_rpath " in
-	      *" $libdir "*) ;;
-	      *) perm_rpath="$perm_rpath $libdir" ;;
-	      esac
-	    fi
-	  done
-	  # Substitute the hardcoded libdirs into the rpath.
-	  if test -n "$hardcode_libdir_separator" &&
-	     test -n "$hardcode_libdirs"; then
-	    libdir="$hardcode_libdirs"
-	    if test -n "$hardcode_libdir_flag_spec_ld"; then
-	      case $archive_cmds in
-	      *\$LD*) eval dep_rpath=\"$hardcode_libdir_flag_spec_ld\" ;;
-	      *)      eval dep_rpath=\"$hardcode_libdir_flag_spec\" ;;
-	      esac
-	    else
-	      eval dep_rpath=\"$hardcode_libdir_flag_spec\"
-	    fi
-	  fi
-	  if test -n "$runpath_var" && test -n "$perm_rpath"; then
-	    # We should set the runpath_var.
-	    rpath=
-	    for dir in $perm_rpath; do
-	      rpath="$rpath$dir:"
-	    done
-	    eval "$runpath_var='$rpath\$$runpath_var'; export $runpath_var"
-	  fi
-	  test -n "$dep_rpath" && deplibs="$dep_rpath $deplibs"
-	fi
+static const size_t env_set_opt_len     = LTWRAPPER_OPTION_PREFIX_LENGTH + 7;
+static const char *env_set_opt          = LTWRAPPER_OPTION_PREFIX "env-set";
+  /* argument is putenv-style "foo=bar", value of foo is set to bar */
 
-	shlibpath="$finalize_shlibpath"
-	test "$mode" != relink && shlibpath="$compile_shlibpath$shlibpath"
-	if test -n "$shlibpath"; then
-	  eval "$shlibpath_var='$shlibpath\$$shlibpath_var'; export $shlibpath_var"
-	fi
+static const size_t env_prepend_opt_len = LTWRAPPER_OPTION_PREFIX_LENGTH + 11;
+static const char *env_prepend_opt      = LTWRAPPER_OPTION_PREFIX "env-prepend";
+  /* argument is putenv-style "foo=bar", new value of foo is bar${foo} */
 
-	# Get the real and link names of the library.
-	eval shared_ext=\"$shrext_cmds\"
-	eval library_names=\"$library_names_spec\"
-	set dummy $library_names
-	realname="$2"
-	shift; shift
+static const size_t env_append_opt_len  = LTWRAPPER_OPTION_PREFIX_LENGTH + 10;
+static const char *env_append_opt       = LTWRAPPER_OPTION_PREFIX "env-append";
+  /* argument is putenv-style "foo=bar", new value of foo is ${foo}bar */
 
-	if test -n "$soname_spec"; then
-	  eval soname=\"$soname_spec\"
-	else
-	  soname="$realname"
-	fi
-	if test -z "$dlname"; then
-	  dlname=$soname
-	fi
+int
+main (int argc, char *argv[])
+{
+  char **newargz;
+  int  newargc;
+  char *tmp_pathspec;
+  char *actual_cwrapper_path;
+  char *actual_cwrapper_name;
+  char *target_name;
+  char *lt_argv_zero;
+  intptr_t rval = 127;
 
-	lib="$output_objdir/$realname"
-	linknames=
-	for link
-	do
-	  linknames="$linknames $link"
-	done
+  int i;
 
-	# Use standard objects if they are pic
-	test -z "$pic_flag" && libobjs=`$echo "X$libobjs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
+  program_name = (char *) xstrdup (base_name (argv[0]));
+  LTWRAPPER_DEBUGPRINTF (("(main) argv[0]      : %s\n", argv[0]));
+  LTWRAPPER_DEBUGPRINTF (("(main) program_name : %s\n", program_name));
 
-	# Prepare the list of exported symbols
-	if test -z "$export_symbols"; then
-	  if test "$always_export_symbols" = yes || test -n "$export_symbols_regex"; then
-	    $show "generating symbol list for \`$libname.la'"
-	    export_symbols="$output_objdir/$libname.exp"
-	    $run $rm $export_symbols
-	    cmds=$export_symbols_cmds
-	    save_ifs="$IFS"; IFS='~'
-	    for cmd in $cmds; do
-	      IFS="$save_ifs"
-	      eval cmd=\"$cmd\"
-	      if len=`expr "X$cmd" : ".*"` &&
-	       test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then
-	        $show "$cmd"
-	        $run eval "$cmd" || exit $?
-	        skipped_export=false
-	      else
-	        # The command line is too long to execute in one step.
-	        $show "using reloadable object file for export list..."
-	        skipped_export=:
-		# Break out early, otherwise skipped_export may be
-		# set to false by a later but shorter cmd.
-		break
-	      fi
-	    done
-	    IFS="$save_ifs"
-	    if test -n "$export_symbols_regex"; then
-	      $show "$EGREP -e \"$export_symbols_regex\" \"$export_symbols\" > \"${export_symbols}T\""
-	      $run eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"'
-	      $show "$mv \"${export_symbols}T\" \"$export_symbols\""
-	      $run eval '$mv "${export_symbols}T" "$export_symbols"'
-	    fi
-	  fi
-	fi
+  /* very simple arg parsing; don't want to rely on getopt */
+  for (i = 1; i < argc; i++)
+    {
+      if (strcmp (argv[i], dumpscript_opt) == 0)
+	{
+EOF
+	    case "$host" in
+	      *mingw* | *cygwin* )
+		# make stdout use "unix" line endings
+		echo "          setmode(1,_O_BINARY);"
+		;;
+	      esac
 
-	if test -n "$export_symbols" && test -n "$include_expsyms"; then
-	  $run eval '$echo "X$include_expsyms" | $SP2NL >> "$export_symbols"'
-	fi
+	    cat <<"EOF"
+	  printf ("%s", script_text_part1);
+	  printf ("%s", script_text_part2);
+	  return 0;
+	}
+    }
 
-	tmp_deplibs=
-	inst_prefix_arg=
-	for test_deplib in $deplibs; do
-		case " $convenience " in
-		*" $test_deplib "*) ;;
-		*)
-			if test -n "$inst_prefix_dir" && (echo "$test_deplib" | grep -- "$inst_prefix_dir" >/dev/null); then
-				inst_prefix_arg="$inst_prefix_arg $test_deplib"
-			else
-				tmp_deplibs="$tmp_deplibs $test_deplib"
-			fi
-			;;
-		esac
-	done
-	deplibs="$tmp_deplibs"
-	if test -n "$inst_prefix_arg"; then
-		deplibs="$inst_prefix_arg $deplibs"
-	fi
+  newargz = XMALLOC (char *, argc + 1);
+  tmp_pathspec = find_executable (argv[0]);
+  if (tmp_pathspec == NULL)
+    lt_fatal ("Couldn't find %s", argv[0]);
+  LTWRAPPER_DEBUGPRINTF (("(main) found exe (before symlink chase) at : %s\n",
+			  tmp_pathspec));
+
+  actual_cwrapper_path = chase_symlinks (tmp_pathspec);
+  LTWRAPPER_DEBUGPRINTF (("(main) found exe (after symlink chase) at : %s\n",
+			  actual_cwrapper_path));
+  XFREE (tmp_pathspec);
+
+  actual_cwrapper_name = xstrdup( base_name (actual_cwrapper_path));
+  strendzap (actual_cwrapper_path, actual_cwrapper_name);
+
+  /* wrapper name transforms */
+  strendzap (actual_cwrapper_name, ".exe");
+  tmp_pathspec = lt_extend_str (actual_cwrapper_name, ".exe", 1);
+  XFREE (actual_cwrapper_name);
+  actual_cwrapper_name = tmp_pathspec;
+  tmp_pathspec = 0;
+
+  /* target_name transforms -- use actual target program name; might have lt- prefix */
+  target_name = xstrdup (base_name (TARGET_PROGRAM_NAME));
+  strendzap (target_name, ".exe");
+  tmp_pathspec = lt_extend_str (target_name, ".exe", 1);
+  XFREE (target_name);
+  target_name = tmp_pathspec;
+  tmp_pathspec = 0;
 
-	if test -n "$convenience"; then
-	  if test -n "$whole_archive_flag_spec"; then
-	    save_libobjs=$libobjs
-	    eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
-	  else
-	    gentop="$output_objdir/${outputname}x"
-	    generated="$generated $gentop"
+  LTWRAPPER_DEBUGPRINTF (("(main) libtool target name: %s\n",
+			  target_name));
+EOF
 
-	    func_extract_archives $gentop $convenience
-	    libobjs="$libobjs $func_extract_archives_result"
-	  fi
-	fi
-	
-	if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then
-	  eval flag=\"$thread_safe_flag_spec\"
-	  linker_flags="$linker_flags $flag"
-	fi
+	    cat <<EOF
+  newargz[0] =
+    XMALLOC (char, (strlen (actual_cwrapper_path) +
+		    strlen ("$objdir") + 1 + strlen (actual_cwrapper_name) + 1));
+  strcpy (newargz[0], actual_cwrapper_path);
+  strcat (newargz[0], "$objdir");
+  strcat (newargz[0], "/");
+EOF
 
-	# Make a backup of the uninstalled library when relinking
-	if test "$mode" = relink; then
-	  $run eval '(cd $output_objdir && $rm ${realname}U && $mv $realname ${realname}U)' || exit $?
-	fi
+	    cat <<"EOF"
+  /* stop here, and copy so we don't have to do this twice */
+  tmp_pathspec = xstrdup (newargz[0]);
+
+  /* do NOT want the lt- prefix here, so use actual_cwrapper_name */
+  strcat (newargz[0], actual_cwrapper_name);
+
+  /* DO want the lt- prefix here if it exists, so use target_name */
+  lt_argv_zero = lt_extend_str (tmp_pathspec, target_name, 1);
+  XFREE (tmp_pathspec);
+  tmp_pathspec = NULL;
+EOF
 
-	# Do each of the archive commands.
-	if test "$module" = yes && test -n "$module_cmds" ; then
-	  if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then
-	    eval test_cmds=\"$module_expsym_cmds\"
-	    cmds=$module_expsym_cmds
-	  else
-	    eval test_cmds=\"$module_cmds\"
-	    cmds=$module_cmds
-	  fi
-	else
-	if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
-	  eval test_cmds=\"$archive_expsym_cmds\"
-	  cmds=$archive_expsym_cmds
-	else
-	  eval test_cmds=\"$archive_cmds\"
-	  cmds=$archive_cmds
-	  fi
-	fi
+	    case $host_os in
+	      mingw*)
+	    cat <<"EOF"
+  {
+    char* p;
+    while ((p = strchr (newargz[0], '\\')) != NULL)
+      {
+	*p = '/';
+      }
+    while ((p = strchr (lt_argv_zero, '\\')) != NULL)
+      {
+	*p = '/';
+      }
+  }
+EOF
+	    ;;
+	    esac
 
-	if test "X$skipped_export" != "X:" &&
-	   len=`expr "X$test_cmds" : ".*" 2>/dev/null` &&
-	   test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then
-	  :
-	else
-	  # The command line is too long to link in one step, link piecewise.
-	  $echo "creating reloadable object files..."
+	    cat <<"EOF"
+  XFREE (target_name);
+  XFREE (actual_cwrapper_path);
+  XFREE (actual_cwrapper_name);
+
+  lt_setenv ("BIN_SH", "xpg4"); /* for Tru64 */
+  lt_setenv ("DUALCASE", "1");  /* for MSK sh */
+  lt_update_lib_path (LIB_PATH_VARNAME, LIB_PATH_VALUE);
+  lt_update_exe_path (EXE_PATH_VARNAME, EXE_PATH_VALUE);
 
-	  # Save the value of $output and $libobjs because we want to
-	  # use them later.  If we have whole_archive_flag_spec, we
-	  # want to use save_libobjs as it was before
-	  # whole_archive_flag_spec was expanded, because we can't
-	  # assume the linker understands whole_archive_flag_spec.
-	  # This may have to be revisited, in case too many
-	  # convenience libraries get linked in and end up exceeding
-	  # the spec.
-	  if test -z "$convenience" || test -z "$whole_archive_flag_spec"; then
-	    save_libobjs=$libobjs
-	  fi
-	  save_output=$output
-	  output_la=`$echo "X$output" | $Xsed -e "$basename"`
+  newargc=0;
+  for (i = 1; i < argc; i++)
+    {
+      if (strncmp (argv[i], env_set_opt, env_set_opt_len) == 0)
+        {
+          if (argv[i][env_set_opt_len] == '=')
+            {
+              const char *p = argv[i] + env_set_opt_len + 1;
+              lt_opt_process_env_set (p);
+            }
+          else if (argv[i][env_set_opt_len] == '\0' && i + 1 < argc)
+            {
+              lt_opt_process_env_set (argv[++i]); /* don't copy */
+            }
+          else
+            lt_fatal ("%s missing required argument", env_set_opt);
+          continue;
+        }
+      if (strncmp (argv[i], env_prepend_opt, env_prepend_opt_len) == 0)
+        {
+          if (argv[i][env_prepend_opt_len] == '=')
+            {
+              const char *p = argv[i] + env_prepend_opt_len + 1;
+              lt_opt_process_env_prepend (p);
+            }
+          else if (argv[i][env_prepend_opt_len] == '\0' && i + 1 < argc)
+            {
+              lt_opt_process_env_prepend (argv[++i]); /* don't copy */
+            }
+          else
+            lt_fatal ("%s missing required argument", env_prepend_opt);
+          continue;
+        }
+      if (strncmp (argv[i], env_append_opt, env_append_opt_len) == 0)
+        {
+          if (argv[i][env_append_opt_len] == '=')
+            {
+              const char *p = argv[i] + env_append_opt_len + 1;
+              lt_opt_process_env_append (p);
+            }
+          else if (argv[i][env_append_opt_len] == '\0' && i + 1 < argc)
+            {
+              lt_opt_process_env_append (argv[++i]); /* don't copy */
+            }
+          else
+            lt_fatal ("%s missing required argument", env_append_opt);
+          continue;
+        }
+      if (strncmp (argv[i], ltwrapper_option_prefix, opt_prefix_len) == 0)
+        {
+          /* however, if there is an option in the LTWRAPPER_OPTION_PREFIX
+             namespace, but it is not one of the ones we know about and
+             have already dealt with, above (inluding dump-script), then
+             report an error. Otherwise, targets might begin to believe
+             they are allowed to use options in the LTWRAPPER_OPTION_PREFIX
+             namespace. The first time any user complains about this, we'll
+             need to make LTWRAPPER_OPTION_PREFIX a configure-time option
+             or a configure.ac-settable value.
+           */
+          lt_fatal ("Unrecognized option in %s namespace: '%s'",
+                    ltwrapper_option_prefix, argv[i]);
+        }
+      /* otherwise ... */
+      newargz[++newargc] = xstrdup (argv[i]);
+    }
+  newargz[++newargc] = NULL;
 
-	  # Clear the reloadable object creation command queue and
-	  # initialize k to one.
-	  test_cmds=
-	  concat_cmds=
-	  objlist=
-	  delfiles=
-	  last_robj=
-	  k=1
-	  output=$output_objdir/$output_la-${k}.$objext
-	  # Loop over the list of objects to be linked.
-	  for obj in $save_libobjs
-	  do
-	    eval test_cmds=\"$reload_cmds $objlist $last_robj\"
-	    if test "X$objlist" = X ||
-	       { len=`expr "X$test_cmds" : ".*" 2>/dev/null` &&
-		 test "$len" -le "$max_cmd_len"; }; then
-	      objlist="$objlist $obj"
-	    else
-	      # The command $test_cmds is almost too long, add a
-	      # command to the queue.
-	      if test "$k" -eq 1 ; then
-		# The first file doesn't have a previous command to add.
-		eval concat_cmds=\"$reload_cmds $objlist $last_robj\"
-	      else
-		# All subsequent reloadable object files will link in
-		# the last one created.
-		eval concat_cmds=\"\$concat_cmds~$reload_cmds $objlist $last_robj\"
-	      fi
-	      last_robj=$output_objdir/$output_la-${k}.$objext
-	      k=`expr $k + 1`
-	      output=$output_objdir/$output_la-${k}.$objext
-	      objlist=$obj
-	      len=1
-	    fi
-	  done
-	  # Handle the remaining objects by creating one last
-	  # reloadable object file.  All subsequent reloadable object
-	  # files will link in the last one created.
-	  test -z "$concat_cmds" || concat_cmds=$concat_cmds~
-	  eval concat_cmds=\"\${concat_cmds}$reload_cmds $objlist $last_robj\"
+  LTWRAPPER_DEBUGPRINTF     (("(main) lt_argv_zero : %s\n", (lt_argv_zero ? lt_argv_zero : "<NULL>")));
+  for (i = 0; i < newargc; i++)
+    {
+      LTWRAPPER_DEBUGPRINTF (("(main) newargz[%d]   : %s\n", i, (newargz[i] ? newargz[i] : "<NULL>")));
+    }
 
-	  if ${skipped_export-false}; then
-	    $show "generating symbol list for \`$libname.la'"
-	    export_symbols="$output_objdir/$libname.exp"
-	    $run $rm $export_symbols
-	    libobjs=$output
-	    # Append the command to create the export file.
-	    eval concat_cmds=\"\$concat_cmds~$export_symbols_cmds\"
-          fi
-
-	  # Set up a command to remove the reloadable object files
-	  # after they are used.
-	  i=0
-	  while test "$i" -lt "$k"
-	  do
-	    i=`expr $i + 1`
-	    delfiles="$delfiles $output_objdir/$output_la-${i}.$objext"
-	  done
+EOF
 
-	  $echo "creating a temporary reloadable object file: $output"
+	    case $host_os in
+	      mingw*)
+		cat <<"EOF"
+  /* execv doesn't actually work on mingw as expected on unix */
+  rval = _spawnv (_P_WAIT, lt_argv_zero, (const char * const *) newargz);
+  if (rval == -1)
+    {
+      /* failed to start process */
+      LTWRAPPER_DEBUGPRINTF (("(main) failed to launch target \"%s\": errno = %d\n", lt_argv_zero, errno));
+      return 127;
+    }
+  return rval;
+EOF
+		;;
+	      *)
+		cat <<"EOF"
+  execv (lt_argv_zero, newargz);
+  return rval; /* =127, but avoids unused variable warning */
+EOF
+		;;
+	    esac
 
-	  # Loop through the commands generated above and execute them.
-	  save_ifs="$IFS"; IFS='~'
-	  for cmd in $concat_cmds; do
-	    IFS="$save_ifs"
-	    $show "$cmd"
-	    $run eval "$cmd" || exit $?
-	  done
-	  IFS="$save_ifs"
+	    cat <<"EOF"
+}
 
-	  libobjs=$output
-	  # Restore the value of output.
-	  output=$save_output
+void *
+xmalloc (size_t num)
+{
+  void *p = (void *) malloc (num);
+  if (!p)
+    lt_fatal ("Memory exhausted");
 
-	  if test -n "$convenience" && test -n "$whole_archive_flag_spec"; then
-	    eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
-	  fi
-	  # Expand the library linking commands again to reset the
-	  # value of $libobjs for piecewise linking.
+  return p;
+}
 
-	  # Do each of the archive commands.
-	  if test "$module" = yes && test -n "$module_cmds" ; then
-	    if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then
-	      cmds=$module_expsym_cmds
-	    else
-	      cmds=$module_cmds
-	    fi
-	  else
-	  if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
-	    cmds=$archive_expsym_cmds
-	  else
-	    cmds=$archive_cmds
-	    fi
-	  fi
+char *
+xstrdup (const char *string)
+{
+  return string ? strcpy ((char *) xmalloc (strlen (string) + 1),
+			  string) : NULL;
+}
 
-	  # Append the command to remove the reloadable object files
-	  # to the just-reset $cmds.
-	  eval cmds=\"\$cmds~\$rm $delfiles\"
-	fi
-	save_ifs="$IFS"; IFS='~'
-	for cmd in $cmds; do
-	  IFS="$save_ifs"
-	  eval cmd=\"$cmd\"
-	  $show "$cmd"
-	  $run eval "$cmd" || {
-	    lt_exit=$?
+const char *
+base_name (const char *name)
+{
+  const char *base;
 
-	    # Restore the uninstalled library and exit
-	    if test "$mode" = relink; then
-	      $run eval '(cd $output_objdir && $rm ${realname}T && $mv ${realname}U $realname)'
-	    fi
+#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
+  /* Skip over the disk name in MSDOS pathnames. */
+  if (isalpha ((unsigned char) name[0]) && name[1] == ':')
+    name += 2;
+#endif
 
-	    exit $lt_exit
-	  }
-	done
-	IFS="$save_ifs"
+  for (base = name; *name; name++)
+    if (IS_DIR_SEPARATOR (*name))
+      base = name + 1;
+  return base;
+}
 
-	# Restore the uninstalled library and exit
-	if test "$mode" = relink; then
-	  $run eval '(cd $output_objdir && $rm ${realname}T && $mv $realname ${realname}T && $mv "$realname"U $realname)' || exit $?
+int
+check_executable (const char *path)
+{
+  struct stat st;
 
-	  if test -n "$convenience"; then
-	    if test -z "$whole_archive_flag_spec"; then
-	      $show "${rm}r $gentop"
-	      $run ${rm}r "$gentop"
-	    fi
-	  fi
+  LTWRAPPER_DEBUGPRINTF (("(check_executable)  : %s\n",
+			  path ? (*path ? path : "EMPTY!") : "NULL!"));
+  if ((!path) || (!*path))
+    return 0;
 
-	  exit $EXIT_SUCCESS
-	fi
+  if ((stat (path, &st) >= 0)
+      && (st.st_mode & (S_IXUSR | S_IXGRP | S_IXOTH)))
+    return 1;
+  else
+    return 0;
+}
 
-	# Create links to the real library.
-	for linkname in $linknames; do
-	  if test "$realname" != "$linkname"; then
-	    $show "(cd $output_objdir && $rm $linkname && $LN_S $realname $linkname)"
-	    $run eval '(cd $output_objdir && $rm $linkname && $LN_S $realname $linkname)' || exit $?
-	  fi
-	done
+int
+make_executable (const char *path)
+{
+  int rval = 0;
+  struct stat st;
 
-	# If -module or -export-dynamic was specified, set the dlname.
-	if test "$module" = yes || test "$export_dynamic" = yes; then
-	  # On all known operating systems, these are identical.
-	  dlname="$soname"
-	fi
-      fi
-      ;;
+  LTWRAPPER_DEBUGPRINTF (("(make_executable)   : %s\n",
+			  path ? (*path ? path : "EMPTY!") : "NULL!"));
+  if ((!path) || (!*path))
+    return 0;
 
-    obj)
-      case " $deplibs" in
-      *\ -l* | *\ -L*)
-	$echo "$modename: warning: \`-l' and \`-L' are ignored for objects" 1>&2 ;;
-      esac
+  if (stat (path, &st) >= 0)
+    {
+      rval = chmod (path, st.st_mode | S_IXOTH | S_IXGRP | S_IXUSR);
+    }
+  return rval;
+}
 
-      if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
-	$echo "$modename: warning: \`-dlopen' is ignored for objects" 1>&2
-      fi
+/* Searches for the full path of the wrapper.  Returns
+   newly allocated full path name if found, NULL otherwise
+   Does not chase symlinks, even on platforms that support them.
+*/
+char *
+find_executable (const char *wrapper)
+{
+  int has_slash = 0;
+  const char *p;
+  const char *p_next;
+  /* static buffer for getcwd */
+  char tmp[LT_PATHMAX + 1];
+  int tmp_len;
+  char *concat_name;
 
-      if test -n "$rpath"; then
-	$echo "$modename: warning: \`-rpath' is ignored for objects" 1>&2
-      fi
+  LTWRAPPER_DEBUGPRINTF (("(find_executable)   : %s\n",
+			  wrapper ? (*wrapper ? wrapper : "EMPTY!") : "NULL!"));
 
-      if test -n "$xrpath"; then
-	$echo "$modename: warning: \`-R' is ignored for objects" 1>&2
-      fi
+  if ((wrapper == NULL) || (*wrapper == '\0'))
+    return NULL;
 
-      if test -n "$vinfo"; then
-	$echo "$modename: warning: \`-version-info' is ignored for objects" 1>&2
-      fi
+  /* Absolute path? */
+#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
+  if (isalpha ((unsigned char) wrapper[0]) && wrapper[1] == ':')
+    {
+      concat_name = xstrdup (wrapper);
+      if (check_executable (concat_name))
+	return concat_name;
+      XFREE (concat_name);
+    }
+  else
+    {
+#endif
+      if (IS_DIR_SEPARATOR (wrapper[0]))
+	{
+	  concat_name = xstrdup (wrapper);
+	  if (check_executable (concat_name))
+	    return concat_name;
+	  XFREE (concat_name);
+	}
+#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
+    }
+#endif
 
-      if test -n "$release"; then
-	$echo "$modename: warning: \`-release' is ignored for objects" 1>&2
-      fi
+  for (p = wrapper; *p; p++)
+    if (*p == '/')
+      {
+	has_slash = 1;
+	break;
+      }
+  if (!has_slash)
+    {
+      /* no slashes; search PATH */
+      const char *path = getenv ("PATH");
+      if (path != NULL)
+	{
+	  for (p = path; *p; p = p_next)
+	    {
+	      const char *q;
+	      size_t p_len;
+	      for (q = p; *q; q++)
+		if (IS_PATH_SEPARATOR (*q))
+		  break;
+	      p_len = q - p;
+	      p_next = (*q == '\0' ? q : q + 1);
+	      if (p_len == 0)
+		{
+		  /* empty path: current directory */
+		  if (getcwd (tmp, LT_PATHMAX) == NULL)
+		    lt_fatal ("getcwd failed");
+		  tmp_len = strlen (tmp);
+		  concat_name =
+		    XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1);
+		  memcpy (concat_name, tmp, tmp_len);
+		  concat_name[tmp_len] = '/';
+		  strcpy (concat_name + tmp_len + 1, wrapper);
+		}
+	      else
+		{
+		  concat_name =
+		    XMALLOC (char, p_len + 1 + strlen (wrapper) + 1);
+		  memcpy (concat_name, p, p_len);
+		  concat_name[p_len] = '/';
+		  strcpy (concat_name + p_len + 1, wrapper);
+		}
+	      if (check_executable (concat_name))
+		return concat_name;
+	      XFREE (concat_name);
+	    }
+	}
+      /* not found in PATH; assume curdir */
+    }
+  /* Relative path | not found in path: prepend cwd */
+  if (getcwd (tmp, LT_PATHMAX) == NULL)
+    lt_fatal ("getcwd failed");
+  tmp_len = strlen (tmp);
+  concat_name = XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1);
+  memcpy (concat_name, tmp, tmp_len);
+  concat_name[tmp_len] = '/';
+  strcpy (concat_name + tmp_len + 1, wrapper);
 
-      case $output in
-      *.lo)
-	if test -n "$objs$old_deplibs"; then
-	  $echo "$modename: cannot build library object \`$output' from non-libtool objects" 1>&2
-	  exit $EXIT_FAILURE
-	fi
-	libobj="$output"
-	obj=`$echo "X$output" | $Xsed -e "$lo2o"`
-	;;
-      *)
-	libobj=
-	obj="$output"
-	;;
-      esac
+  if (check_executable (concat_name))
+    return concat_name;
+  XFREE (concat_name);
+  return NULL;
+}
 
-      # Delete the old objects.
-      $run $rm $obj $libobj
+char *
+chase_symlinks (const char *pathspec)
+{
+#ifndef S_ISLNK
+  return xstrdup (pathspec);
+#else
+  char buf[LT_PATHMAX];
+  struct stat s;
+  char *tmp_pathspec = xstrdup (pathspec);
+  char *p;
+  int has_symlinks = 0;
+  while (strlen (tmp_pathspec) && !has_symlinks)
+    {
+      LTWRAPPER_DEBUGPRINTF (("checking path component for symlinks: %s\n",
+			      tmp_pathspec));
+      if (lstat (tmp_pathspec, &s) == 0)
+	{
+	  if (S_ISLNK (s.st_mode) != 0)
+	    {
+	      has_symlinks = 1;
+	      break;
+	    }
 
-      # Objects from convenience libraries.  This assumes
-      # single-version convenience libraries.  Whenever we create
-      # different ones for PIC/non-PIC, this we'll have to duplicate
-      # the extraction.
-      reload_conv_objs=
-      gentop=
-      # reload_cmds runs $LD directly, so let us get rid of
-      # -Wl from whole_archive_flag_spec and hope we can get by with
-      # turning comma into space..
-      wl=
+	  /* search backwards for last DIR_SEPARATOR */
+	  p = tmp_pathspec + strlen (tmp_pathspec) - 1;
+	  while ((p > tmp_pathspec) && (!IS_DIR_SEPARATOR (*p)))
+	    p--;
+	  if ((p == tmp_pathspec) && (!IS_DIR_SEPARATOR (*p)))
+	    {
+	      /* no more DIR_SEPARATORS left */
+	      break;
+	    }
+	  *p = '\0';
+	}
+      else
+	{
+	  char *errstr = strerror (errno);
+	  lt_fatal ("Error accessing file %s (%s)", tmp_pathspec, errstr);
+	}
+    }
+  XFREE (tmp_pathspec);
 
-      if test -n "$convenience"; then
-	if test -n "$whole_archive_flag_spec"; then
-	  eval tmp_whole_archive_flags=\"$whole_archive_flag_spec\"
-	  reload_conv_objs=$reload_objs\ `$echo "X$tmp_whole_archive_flags" | $Xsed -e 's|,| |g'`
-	else
-	  gentop="$output_objdir/${obj}x"
-	  generated="$generated $gentop"
+  if (!has_symlinks)
+    {
+      return xstrdup (pathspec);
+    }
 
-	  func_extract_archives $gentop $convenience
-	  reload_conv_objs="$reload_objs $func_extract_archives_result"
-	fi
-      fi
+  tmp_pathspec = realpath (pathspec, buf);
+  if (tmp_pathspec == 0)
+    {
+      lt_fatal ("Could not follow symlinks for %s", pathspec);
+    }
+  return xstrdup (tmp_pathspec);
+#endif
+}
 
-      # Create the old-style object.
-      reload_objs="$objs$old_deplibs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}$'/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test
+char *
+strendzap (char *str, const char *pat)
+{
+  size_t len, patlen;
 
-      output="$obj"
-      cmds=$reload_cmds
-      save_ifs="$IFS"; IFS='~'
-      for cmd in $cmds; do
-	IFS="$save_ifs"
-	eval cmd=\"$cmd\"
-	$show "$cmd"
-	$run eval "$cmd" || exit $?
-      done
-      IFS="$save_ifs"
+  assert (str != NULL);
+  assert (pat != NULL);
 
-      # Exit if we aren't doing a library object file.
-      if test -z "$libobj"; then
-	if test -n "$gentop"; then
-	  $show "${rm}r $gentop"
-	  $run ${rm}r $gentop
-	fi
+  len = strlen (str);
+  patlen = strlen (pat);
 
-	exit $EXIT_SUCCESS
-      fi
-
-      if test "$build_libtool_libs" != yes; then
-	if test -n "$gentop"; then
-	  $show "${rm}r $gentop"
-	  $run ${rm}r $gentop
-	fi
-
-	# Create an invalid libtool object if no PIC, so that we don't
-	# accidentally link it into a program.
-	# $show "echo timestamp > $libobj"
-	# $run eval "echo timestamp > $libobj" || exit $?
-	exit $EXIT_SUCCESS
-      fi
-
-      if test -n "$pic_flag" || test "$pic_mode" != default; then
-	# Only do commands if we really have different PIC objects.
-	reload_objs="$libobjs $reload_conv_objs"
-	output="$libobj"
-	cmds=$reload_cmds
-	save_ifs="$IFS"; IFS='~'
-	for cmd in $cmds; do
-	  IFS="$save_ifs"
-	  eval cmd=\"$cmd\"
-	  $show "$cmd"
-	  $run eval "$cmd" || exit $?
-	done
-	IFS="$save_ifs"
-      fi
+  if (patlen <= len)
+    {
+      str += len - patlen;
+      if (strcmp (str, pat) == 0)
+	*str = '\0';
+    }
+  return str;
+}
 
-      if test -n "$gentop"; then
-	$show "${rm}r $gentop"
-	$run ${rm}r $gentop
-      fi
+static void
+lt_error_core (int exit_status, const char *mode,
+	       const char *message, va_list ap)
+{
+  fprintf (stderr, "%s: %s: ", program_name, mode);
+  vfprintf (stderr, message, ap);
+  fprintf (stderr, ".\n");
 
-      exit $EXIT_SUCCESS
-      ;;
+  if (exit_status >= 0)
+    exit (exit_status);
+}
 
-    prog)
-      case $host in
-	*cygwin*) output=`$echo $output | ${SED} -e 's,.exe$,,;s,$,.exe,'` ;;
-      esac
-      if test -n "$vinfo"; then
-	$echo "$modename: warning: \`-version-info' is ignored for programs" 1>&2
-      fi
+void
+lt_fatal (const char *message, ...)
+{
+  va_list ap;
+  va_start (ap, message);
+  lt_error_core (EXIT_FAILURE, "FATAL", message, ap);
+  va_end (ap);
+}
 
-      if test -n "$release"; then
-	$echo "$modename: warning: \`-release' is ignored for programs" 1>&2
-      fi
+void
+lt_setenv (const char *name, const char *value)
+{
+  LTWRAPPER_DEBUGPRINTF (("(lt_setenv) setting '%s' to '%s'\n",
+                          (name ? name : "<NULL>"),
+                          (value ? value : "<NULL>")));
+  {
+#ifdef HAVE_SETENV
+    /* always make a copy, for consistency with !HAVE_SETENV */
+    char *str = xstrdup (value);
+    setenv (name, str, 1);
+#else
+    int len = strlen (name) + 1 + strlen (value) + 1;
+    char *str = XMALLOC (char, len);
+    sprintf (str, "%s=%s", name, value);
+    if (putenv (str) != EXIT_SUCCESS)
+      {
+        XFREE (str);
+      }
+#endif
+  }
+}
 
-      if test "$preload" = yes; then
-	if test "$dlopen_support" = unknown && test "$dlopen_self" = unknown &&
-	   test "$dlopen_self_static" = unknown; then
-	  $echo "$modename: warning: \`AC_LIBTOOL_DLOPEN' not used. Assuming no dlopen support."
-	fi
-      fi
+char *
+lt_extend_str (const char *orig_value, const char *add, int to_end)
+{
+  char *new_value;
+  if (orig_value && *orig_value)
+    {
+      int orig_value_len = strlen (orig_value);
+      int add_len = strlen (add);
+      new_value = XMALLOC (char, add_len + orig_value_len + 1);
+      if (to_end)
+        {
+          strcpy (new_value, orig_value);
+          strcpy (new_value + orig_value_len, add);
+        }
+      else
+        {
+          strcpy (new_value, add);
+          strcpy (new_value + add_len, orig_value);
+        }
+    }
+  else
+    {
+      new_value = xstrdup (add);
+    }
+  return new_value;
+}
 
-      case $host in
-      *-*-rhapsody* | *-*-darwin1.[012])
-	# On Rhapsody replace the C library is the System framework
-	compile_deplibs=`$echo "X $compile_deplibs" | $Xsed -e 's/ -lc / -framework System /'`
-	finalize_deplibs=`$echo "X $finalize_deplibs" | $Xsed -e 's/ -lc / -framework System /'`
-	;;
-      esac
+int
+lt_split_name_value (const char *arg, char** name, char** value)
+{
+  const char *p;
+  int len;
+  if (!arg || !*arg)
+    return 1;
 
-      case $host in
-      *darwin*)
-        # Don't allow lazy linking, it breaks C++ global constructors
-        if test "$tagname" = CXX ; then
-        compile_command="$compile_command ${wl}-bind_at_load"
-        finalize_command="$finalize_command ${wl}-bind_at_load"
-        fi
-        ;;
-      esac
+  p = strchr (arg, (int)'=');
 
+  if (!p)
+    return 1;
 
-      # move library search paths that coincide with paths to not yet
-      # installed libraries to the beginning of the library search list
-      new_libs=
-      for path in $notinst_path; do
-	case " $new_libs " in
-	*" -L$path/$objdir "*) ;;
-	*)
-	  case " $compile_deplibs " in
-	  *" -L$path/$objdir "*)
-	    new_libs="$new_libs -L$path/$objdir" ;;
-	  esac
-	  ;;
-	esac
-      done
-      for deplib in $compile_deplibs; do
-	case $deplib in
-	-L*)
-	  case " $new_libs " in
-	  *" $deplib "*) ;;
-	  *) new_libs="$new_libs $deplib" ;;
-	  esac
-	  ;;
-	*) new_libs="$new_libs $deplib" ;;
-	esac
-      done
-      compile_deplibs="$new_libs"
+  *value = xstrdup (++p);
 
+  len = strlen (arg) - strlen (*value);
+  *name = XMALLOC (char, len);
+  strncpy (*name, arg, len-1);
+  (*name)[len - 1] = '\0';
 
-      compile_command="$compile_command $compile_deplibs"
-      finalize_command="$finalize_command $finalize_deplibs"
+  return 0;
+}
 
-      if test -n "$rpath$xrpath"; then
-	# If the user specified any rpath flags, then add them.
-	for libdir in $rpath $xrpath; do
-	  # This is the magic to use -rpath.
-	  case "$finalize_rpath " in
-	  *" $libdir "*) ;;
-	  *) finalize_rpath="$finalize_rpath $libdir" ;;
-	  esac
-	done
-      fi
+void
+lt_opt_process_env_set (const char *arg)
+{
+  char *name = NULL;
+  char *value = NULL;
 
-      # Now hardcode the library paths
-      rpath=
-      hardcode_libdirs=
-      for libdir in $compile_rpath $finalize_rpath; do
-	if test -n "$hardcode_libdir_flag_spec"; then
-	  if test -n "$hardcode_libdir_separator"; then
-	    if test -z "$hardcode_libdirs"; then
-	      hardcode_libdirs="$libdir"
-	    else
-	      # Just accumulate the unique libdirs.
-	      case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
-	      *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
-		;;
-	      *)
-		hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
-		;;
-	      esac
-	    fi
-	  else
-	    eval flag=\"$hardcode_libdir_flag_spec\"
-	    rpath="$rpath $flag"
-	  fi
-	elif test -n "$runpath_var"; then
-	  case "$perm_rpath " in
-	  *" $libdir "*) ;;
-	  *) perm_rpath="$perm_rpath $libdir" ;;
-	  esac
-	fi
-	case $host in
-	*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
-	  testbindir=`$echo "X$libdir" | $Xsed -e 's*/lib$*/bin*'`
-	  case :$dllsearchpath: in
-	  *":$libdir:"*) ;;
-	  *) dllsearchpath="$dllsearchpath:$libdir";;
-	  esac
-	  case :$dllsearchpath: in
-	  *":$testbindir:"*) ;;
-	  *) dllsearchpath="$dllsearchpath:$testbindir";;
-	  esac
-	  ;;
-	esac
-      done
-      # Substitute the hardcoded libdirs into the rpath.
-      if test -n "$hardcode_libdir_separator" &&
-	 test -n "$hardcode_libdirs"; then
-	libdir="$hardcode_libdirs"
-	eval rpath=\" $hardcode_libdir_flag_spec\"
-      fi
-      compile_rpath="$rpath"
+  if (lt_split_name_value (arg, &name, &value) != 0)
+    {
+      XFREE (name);
+      XFREE (value);
+      lt_fatal ("bad argument for %s: '%s'", env_set_opt, arg);
+    }
 
-      rpath=
-      hardcode_libdirs=
-      for libdir in $finalize_rpath; do
-	if test -n "$hardcode_libdir_flag_spec"; then
-	  if test -n "$hardcode_libdir_separator"; then
-	    if test -z "$hardcode_libdirs"; then
-	      hardcode_libdirs="$libdir"
-	    else
-	      # Just accumulate the unique libdirs.
-	      case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
-	      *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
-		;;
-	      *)
-		hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
-		;;
-	      esac
-	    fi
-	  else
-	    eval flag=\"$hardcode_libdir_flag_spec\"
-	    rpath="$rpath $flag"
-	  fi
-	elif test -n "$runpath_var"; then
-	  case "$finalize_perm_rpath " in
-	  *" $libdir "*) ;;
-	  *) finalize_perm_rpath="$finalize_perm_rpath $libdir" ;;
-	  esac
-	fi
-      done
-      # Substitute the hardcoded libdirs into the rpath.
-      if test -n "$hardcode_libdir_separator" &&
-	 test -n "$hardcode_libdirs"; then
-	libdir="$hardcode_libdirs"
-	eval rpath=\" $hardcode_libdir_flag_spec\"
-      fi
-      finalize_rpath="$rpath"
+  lt_setenv (name, value);
+  XFREE (name);
+  XFREE (value);
+}
 
-      if test -n "$libobjs" && test "$build_old_libs" = yes; then
-	# Transform all the library objects into standard objects.
-	compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
-	finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
-      fi
+void
+lt_opt_process_env_prepend (const char *arg)
+{
+  char *name = NULL;
+  char *value = NULL;
+  char *new_value = NULL;
 
-      dlsyms=
-      if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
-	if test -n "$NM" && test -n "$global_symbol_pipe"; then
-	  dlsyms="${outputname}S.c"
-	else
-	  $echo "$modename: not configured to extract global symbols from dlpreopened files" 1>&2
-	fi
-      fi
+  if (lt_split_name_value (arg, &name, &value) != 0)
+    {
+      XFREE (name);
+      XFREE (value);
+      lt_fatal ("bad argument for %s: '%s'", env_prepend_opt, arg);
+    }
 
-      if test -n "$dlsyms"; then
-	case $dlsyms in
-	"") ;;
-	*.c)
-	  # Discover the nlist of each of the dlfiles.
-	  nlist="$output_objdir/${outputname}.nm"
+  new_value = lt_extend_str (getenv (name), value, 0);
+  lt_setenv (name, new_value);
+  XFREE (new_value);
+  XFREE (name);
+  XFREE (value);
+}
 
-	  $show "$rm $nlist ${nlist}S ${nlist}T"
-	  $run $rm "$nlist" "${nlist}S" "${nlist}T"
+void
+lt_opt_process_env_append (const char *arg)
+{
+  char *name = NULL;
+  char *value = NULL;
+  char *new_value = NULL;
 
-	  # Parse the name list into a source file.
-	  $show "creating $output_objdir/$dlsyms"
+  if (lt_split_name_value (arg, &name, &value) != 0)
+    {
+      XFREE (name);
+      XFREE (value);
+      lt_fatal ("bad argument for %s: '%s'", env_append_opt, arg);
+    }
 
-	  test -z "$run" && $echo > "$output_objdir/$dlsyms" "\
-/* $dlsyms - symbol resolution table for \`$outputname' dlsym emulation. */
-/* Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP */
+  new_value = lt_extend_str (getenv (name), value, 1);
+  lt_setenv (name, new_value);
+  XFREE (new_value);
+  XFREE (name);
+  XFREE (value);
+}
 
-#ifdef __cplusplus
-extern \"C\" {
-#endif
+void
+lt_update_exe_path (const char *name, const char *value)
+{
+  LTWRAPPER_DEBUGPRINTF (("(lt_update_exe_path) modifying '%s' by prepending '%s'\n",
+                          (name ? name : "<NULL>"),
+                          (value ? value : "<NULL>")));
 
-/* Prevent the only kind of declaration conflicts we can make. */
-#define lt_preloaded_symbols some_other_symbol
+  if (name && *name && value && *value)
+    {
+      char *new_value = lt_extend_str (getenv (name), value, 0);
+      /* some systems can't cope with a ':'-terminated path #' */
+      int len = strlen (new_value);
+      while (((len = strlen (new_value)) > 0) && IS_PATH_SEPARATOR (new_value[len-1]))
+        {
+          new_value[len-1] = '\0';
+        }
+      lt_setenv (name, new_value);
+      XFREE (new_value);
+    }
+}
 
-/* External symbol declarations for the compiler. */\
-"
+void
+lt_update_lib_path (const char *name, const char *value)
+{
+  LTWRAPPER_DEBUGPRINTF (("(lt_update_lib_path) modifying '%s' by prepending '%s'\n",
+                          (name ? name : "<NULL>"),
+                          (value ? value : "<NULL>")));
 
-	  if test "$dlself" = yes; then
-	    $show "generating symbol list for \`$output'"
+  if (name && *name && value && *value)
+    {
+      char *new_value = lt_extend_str (getenv (name), value, 0);
+      lt_setenv (name, new_value);
+      XFREE (new_value);
+    }
+}
 
-	    test -z "$run" && $echo ': @PROGRAM@ ' > "$nlist"
 
-	    # Add our own program objects to the symbol list.
-	    progfiles=`$echo "X$objs$old_deplibs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
-	    for arg in $progfiles; do
-	      $show "extracting global C symbols from \`$arg'"
-	      $run eval "$NM $arg | $global_symbol_pipe >> '$nlist'"
-	    done
+EOF
+}
+# end: func_emit_cwrapperexe_src
 
-	    if test -n "$exclude_expsyms"; then
-	      $run eval '$EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T'
-	      $run eval '$mv "$nlist"T "$nlist"'
-	    fi
-
-	    if test -n "$export_symbols_regex"; then
-	      $run eval '$EGREP -e "$export_symbols_regex" "$nlist" > "$nlist"T'
-	      $run eval '$mv "$nlist"T "$nlist"'
-	    fi
-
-	    # Prepare the list of exported symbols
-	    if test -z "$export_symbols"; then
-	      export_symbols="$output_objdir/$outputname.exp"
-	      $run $rm $export_symbols
-	      $run eval "${SED} -n -e '/^: @PROGRAM@ $/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"'
-              case $host in
-              *cygwin* | *mingw* )
-	        $run eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
-		$run eval 'cat "$export_symbols" >> "$output_objdir/$outputname.def"'
-                ;;
-              esac
-	    else
-	      $run eval "${SED} -e 's/\([].[*^$]\)/\\\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"'
-	      $run eval 'grep -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T'
-	      $run eval 'mv "$nlist"T "$nlist"'
-              case $host in
-              *cygwin* | *mingw* )
-	        $run eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
-		$run eval 'cat "$nlist" >> "$output_objdir/$outputname.def"'
-                ;;
-              esac
-	    fi
+# func_mode_link arg...
+func_mode_link ()
+{
+    $opt_debug
+    case $host in
+    *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)
+      # It is impossible to link a dll without this setting, and
+      # we shouldn't force the makefile maintainer to figure out
+      # which system we are compiling for in order to pass an extra
+      # flag for every libtool invocation.
+      # allow_undefined=no
+
+      # FIXME: Unfortunately, there are problems with the above when trying
+      # to make a dll which has undefined symbols, in which case not
+      # even a static library is built.  For now, we need to specify
+      # -no-undefined on the libtool link line when we can be certain
+      # that all symbols are satisfied, otherwise we get a static library.
+      allow_undefined=yes
+      ;;
+    *)
+      allow_undefined=yes
+      ;;
+    esac
+    libtool_args=$nonopt
+    base_compile="$nonopt $@"
+    compile_command=$nonopt
+    finalize_command=$nonopt
+
+    compile_rpath=
+    finalize_rpath=
+    compile_shlibpath=
+    finalize_shlibpath=
+    convenience=
+    old_convenience=
+    deplibs=
+    old_deplibs=
+    compiler_flags=
+    linker_flags=
+    dllsearchpath=
+    lib_search_path=`pwd`
+    inst_prefix_dir=
+    new_inherited_linker_flags=
+
+    avoid_version=no
+    dlfiles=
+    dlprefiles=
+    dlself=no
+    export_dynamic=no
+    export_symbols=
+    export_symbols_regex=
+    generated=
+    libobjs=
+    ltlibs=
+    module=no
+    no_install=no
+    objs=
+    non_pic_objects=
+    precious_files_regex=
+    prefer_static_libs=no
+    preload=no
+    prev=
+    prevarg=
+    release=
+    rpath=
+    xrpath=
+    perm_rpath=
+    temp_rpath=
+    thread_safe=no
+    vinfo=
+    vinfo_number=no
+    weak_libs=
+    single_module="${wl}-single_module"
+    func_infer_tag $base_compile
+
+    # We need to know -static, to get the right output filenames.
+    for arg
+    do
+      case $arg in
+      -shared)
+	test "$build_libtool_libs" != yes && \
+	  func_fatal_configuration "can not build a shared library"
+	build_old_libs=no
+	break
+	;;
+      -all-static | -static | -static-libtool-libs)
+	case $arg in
+	-all-static)
+	  if test "$build_libtool_libs" = yes && test -z "$link_static_flag"; then
+	    func_warning "complete static linking is impossible in this configuration"
+	  fi
+	  if test -n "$link_static_flag"; then
+	    dlopen_self=$dlopen_self_static
+	  fi
+	  prefer_static_libs=yes
+	  ;;
+	-static)
+	  if test -z "$pic_flag" && test -n "$link_static_flag"; then
+	    dlopen_self=$dlopen_self_static
+	  fi
+	  prefer_static_libs=built
+	  ;;
+	-static-libtool-libs)
+	  if test -z "$pic_flag" && test -n "$link_static_flag"; then
+	    dlopen_self=$dlopen_self_static
 	  fi
+	  prefer_static_libs=yes
+	  ;;
+	esac
+	build_libtool_libs=no
+	build_old_libs=yes
+	break
+	;;
+      esac
+    done
 
-	  for arg in $dlprefiles; do
-	    $show "extracting global C symbols from \`$arg'"
-	    name=`$echo "$arg" | ${SED} -e 's%^.*/%%'`
-	    $run eval '$echo ": $name " >> "$nlist"'
-	    $run eval "$NM $arg | $global_symbol_pipe >> '$nlist'"
-	  done
+    # See if our shared archives depend on static archives.
+    test -n "$old_archive_from_new_cmds" && build_old_libs=yes
 
-	  if test -z "$run"; then
-	    # Make sure we have at least an empty file.
-	    test -f "$nlist" || : > "$nlist"
-
-	    if test -n "$exclude_expsyms"; then
-	      $EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T
-	      $mv "$nlist"T "$nlist"
-	    fi
+    # Go through the arguments, transforming them on the way.
+    while test "$#" -gt 0; do
+      arg="$1"
+      shift
+      func_quote_for_eval "$arg"
+      qarg=$func_quote_for_eval_unquoted_result
+      func_append libtool_args " $func_quote_for_eval_result"
 
-	    # Try sorting and uniquifying the output.
-	    if grep -v "^: " < "$nlist" |
-		if sort -k 3 </dev/null >/dev/null 2>&1; then
-		  sort -k 3
-		else
-		  sort +2
-		fi |
-		uniq > "$nlist"S; then
-	      :
+      # If the previous option needs an argument, assign it.
+      if test -n "$prev"; then
+	case $prev in
+	output)
+	  func_append compile_command " @OUTPUT@"
+	  func_append finalize_command " @OUTPUT@"
+	  ;;
+	esac
+
+	case $prev in
+	dlfiles|dlprefiles)
+	  if test "$preload" = no; then
+	    # Add the symbol object into the linking commands.
+	    func_append compile_command " @SYMFILE@"
+	    func_append finalize_command " @SYMFILE@"
+	    preload=yes
+	  fi
+	  case $arg in
+	  *.la | *.lo) ;;  # We handle these cases below.
+	  force)
+	    if test "$dlself" = no; then
+	      dlself=needless
+	      export_dynamic=yes
+	    fi
+	    prev=
+	    continue
+	    ;;
+	  self)
+	    if test "$prev" = dlprefiles; then
+	      dlself=yes
+	    elif test "$prev" = dlfiles && test "$dlopen_self" != yes; then
+	      dlself=yes
 	    else
-	      grep -v "^: " < "$nlist" > "$nlist"S
+	      dlself=needless
+	      export_dynamic=yes
 	    fi
-
-	    if test -f "$nlist"S; then
-	      eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$dlsyms"'
+	    prev=
+	    continue
+	    ;;
+	  *)
+	    if test "$prev" = dlfiles; then
+	      dlfiles="$dlfiles $arg"
 	    else
-	      $echo '/* NONE */' >> "$output_objdir/$dlsyms"
+	      dlprefiles="$dlprefiles $arg"
 	    fi
+	    prev=
+	    continue
+	    ;;
+	  esac
+	  ;;
+	expsyms)
+	  export_symbols="$arg"
+	  test -f "$arg" \
+	    || func_fatal_error "symbol file \`$arg' does not exist"
+	  prev=
+	  continue
+	  ;;
+	expsyms_regex)
+	  export_symbols_regex="$arg"
+	  prev=
+	  continue
+	  ;;
+	framework)
+	  case $host in
+	    *-*-darwin*)
+	      case "$deplibs " in
+		*" $qarg.ltframework "*) ;;
+		*) deplibs="$deplibs $qarg.ltframework" # this is fixed later
+		   ;;
+	      esac
+	      ;;
+	  esac
+	  prev=
+	  continue
+	  ;;
+	inst_prefix)
+	  inst_prefix_dir="$arg"
+	  prev=
+	  continue
+	  ;;
+	objectlist)
+	  if test -f "$arg"; then
+	    save_arg=$arg
+	    moreargs=
+	    for fil in `cat "$save_arg"`
+	    do
+#	      moreargs="$moreargs $fil"
+	      arg=$fil
+	      # A libtool-controlled object.
 
-	    $echo >> "$output_objdir/$dlsyms" "\
+	      # Check to see that this really is a libtool object.
+	      if func_lalib_unsafe_p "$arg"; then
+		pic_object=
+		non_pic_object=
 
-#undef lt_preloaded_symbols
+		# Read the .lo file
+		func_source "$arg"
 
-#if defined (__STDC__) && __STDC__
-# define lt_ptr void *
-#else
-# define lt_ptr char *
-# define const
-#endif
+		if test -z "$pic_object" ||
+		   test -z "$non_pic_object" ||
+		   test "$pic_object" = none &&
+		   test "$non_pic_object" = none; then
+		  func_fatal_error "cannot find name of object for \`$arg'"
+		fi
 
-/* The mapping between symbol names and symbols. */
-"
+		# Extract subdirectory from the argument.
+		func_dirname "$arg" "/" ""
+		xdir="$func_dirname_result"
 
-	    case $host in
-	    *cygwin* | *mingw* )
-	  $echo >> "$output_objdir/$dlsyms" "\
-/* DATA imports from DLLs on WIN32 can't be const, because
-   runtime relocations are performed -- see ld's documentation
-   on pseudo-relocs */
-struct {
-"
-	      ;;
-	    * )
-	  $echo >> "$output_objdir/$dlsyms" "\
-const struct {
-"
-	      ;;
-	    esac
+		if test "$pic_object" != none; then
+		  # Prepend the subdirectory the object is found in.
+		  pic_object="$xdir$pic_object"
 
+		  if test "$prev" = dlfiles; then
+		    if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
+		      dlfiles="$dlfiles $pic_object"
+		      prev=
+		      continue
+		    else
+		      # If libtool objects are unsupported, then we need to preload.
+		      prev=dlprefiles
+		    fi
+		  fi
 
-	  $echo >> "$output_objdir/$dlsyms" "\
-  const char *name;
-  lt_ptr address;
-}
-lt_preloaded_symbols[] =
-{\
-"
+		  # CHECK ME:  I think I busted this.  -Ossama
+		  if test "$prev" = dlprefiles; then
+		    # Preload the old-style object.
+		    dlprefiles="$dlprefiles $pic_object"
+		    prev=
+		  fi
 
-	    eval "$global_symbol_to_c_name_address" < "$nlist" >> "$output_objdir/$dlsyms"
+		  # A PIC object.
+		  func_append libobjs " $pic_object"
+		  arg="$pic_object"
+		fi
 
-	    $echo >> "$output_objdir/$dlsyms" "\
-  {0, (lt_ptr) 0}
-};
+		# Non-PIC object.
+		if test "$non_pic_object" != none; then
+		  # Prepend the subdirectory the object is found in.
+		  non_pic_object="$xdir$non_pic_object"
 
-/* This works around a problem in FreeBSD linker */
-#ifdef FREEBSD_WORKAROUND
-static const void *lt_preloaded_setup() {
-  return lt_preloaded_symbols;
-}
-#endif
+		  # A standard non-PIC object
+		  func_append non_pic_objects " $non_pic_object"
+		  if test -z "$pic_object" || test "$pic_object" = none ; then
+		    arg="$non_pic_object"
+		  fi
+		else
+		  # If the PIC object exists, use it instead.
+		  # $xdir was prepended to $pic_object above.
+		  non_pic_object="$pic_object"
+		  func_append non_pic_objects " $non_pic_object"
+		fi
+	      else
+		# Only an error if not doing a dry-run.
+		if $opt_dry_run; then
+		  # Extract subdirectory from the argument.
+		  func_dirname "$arg" "/" ""
+		  xdir="$func_dirname_result"
 
-#ifdef __cplusplus
-}
-#endif\
-"
+		  func_lo2o "$arg"
+		  pic_object=$xdir$objdir/$func_lo2o_result
+		  non_pic_object=$xdir$func_lo2o_result
+		  func_append libobjs " $pic_object"
+		  func_append non_pic_objects " $non_pic_object"
+	        else
+		  func_fatal_error "\`$arg' is not a valid libtool object"
+		fi
+	      fi
+	    done
+	  else
+	    func_fatal_error "link input file \`$arg' does not exist"
 	  fi
-
-	  pic_flag_for_symtable=
-	  case $host in
-	  # compiling the symbol table file with pic_flag works around
-	  # a FreeBSD bug that causes programs to crash when -lm is
-	  # linked before any other PIC object.  But we must not use
-	  # pic_flag when linking with -static.  The problem exists in
-	  # FreeBSD 2.2.6 and is fixed in FreeBSD 3.1.
-	  *-*-freebsd2*|*-*-freebsd3.0*|*-*-freebsdelf3.0*)
-	    case "$compile_command " in
-	    *" -static "*) ;;
-	    *) pic_flag_for_symtable=" $pic_flag -DFREEBSD_WORKAROUND";;
-	    esac;;
-	  *-*-hpux*)
-	    case "$compile_command " in
-	    *" -static "*) ;;
-	    *) pic_flag_for_symtable=" $pic_flag";;
-	    esac
+	  arg=$save_arg
+	  prev=
+	  continue
+	  ;;
+	precious_regex)
+	  precious_files_regex="$arg"
+	  prev=
+	  continue
+	  ;;
+	release)
+	  release="-$arg"
+	  prev=
+	  continue
+	  ;;
+	rpath | xrpath)
+	  # We need an absolute path.
+	  case $arg in
+	  [\\/]* | [A-Za-z]:[\\/]*) ;;
+	  *)
+	    func_fatal_error "only absolute run-paths are allowed"
+	    ;;
 	  esac
-
-	  # Now compile the dynamic symbol file.
-	  $show "(cd $output_objdir && $LTCC  $LTCFLAGS -c$no_builtin_flag$pic_flag_for_symtable \"$dlsyms\")"
-	  $run eval '(cd $output_objdir && $LTCC  $LTCFLAGS -c$no_builtin_flag$pic_flag_for_symtable "$dlsyms")' || exit $?
-
-	  # Clean up the generated files.
-	  $show "$rm $output_objdir/$dlsyms $nlist ${nlist}S ${nlist}T"
-	  $run $rm "$output_objdir/$dlsyms" "$nlist" "${nlist}S" "${nlist}T"
-
-	  # Transform the symbol file into the correct name.
-          case $host in
-          *cygwin* | *mingw* )
-            if test -f "$output_objdir/${outputname}.def" ; then
-              compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}.def $output_objdir/${outputname}S.${objext}%" | $NL2SP`
-              finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}.def $output_objdir/${outputname}S.${objext}%" | $NL2SP`
-            else
-              compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%" | $NL2SP`
-              finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%" | $NL2SP`
-             fi
-            ;;
-          * )
-            compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%" | $NL2SP`
-            finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%" | $NL2SP`
-            ;;
-          esac
+	  if test "$prev" = rpath; then
+	    case "$rpath " in
+	    *" $arg "*) ;;
+	    *) rpath="$rpath $arg" ;;
+	    esac
+	  else
+	    case "$xrpath " in
+	    *" $arg "*) ;;
+	    *) xrpath="$xrpath $arg" ;;
+	    esac
+	  fi
+	  prev=
+	  continue
+	  ;;
+	shrext)
+	  shrext_cmds="$arg"
+	  prev=
+	  continue
+	  ;;
+	weak)
+	  weak_libs="$weak_libs $arg"
+	  prev=
+	  continue
+	  ;;
+	xcclinker)
+	  linker_flags="$linker_flags $qarg"
+	  compiler_flags="$compiler_flags $qarg"
+	  prev=
+	  func_append compile_command " $qarg"
+	  func_append finalize_command " $qarg"
+	  continue
+	  ;;
+	xcompiler)
+	  compiler_flags="$compiler_flags $qarg"
+	  prev=
+	  func_append compile_command " $qarg"
+	  func_append finalize_command " $qarg"
+	  continue
+	  ;;
+	xlinker)
+	  linker_flags="$linker_flags $qarg"
+	  compiler_flags="$compiler_flags $wl$qarg"
+	  prev=
+	  func_append compile_command " $wl$qarg"
+	  func_append finalize_command " $wl$qarg"
+	  continue
 	  ;;
 	*)
-	  $echo "$modename: unknown suffix for \`$dlsyms'" 1>&2
-	  exit $EXIT_FAILURE
+	  eval "$prev=\"\$arg\""
+	  prev=
+	  continue
 	  ;;
 	esac
-      else
-	# We keep going just in case the user didn't refer to
-	# lt_preloaded_symbols.  The linker will fail if global_symbol_pipe
-	# really was required.
-
-	# Nullify the symbol file.
-	compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "s% @SYMFILE@%%" | $NL2SP`
-	finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "s% @SYMFILE@%%" | $NL2SP`
-      fi
-
-      if test "$need_relink" = no || test "$build_libtool_libs" != yes; then
-	# Replace the output file specification.
-	compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e 's%@OUTPUT@%'"$output"'%g' | $NL2SP`
-	link_command="$compile_command$compile_rpath"
+      fi # test -n "$prev"
 
-	# We have no uninstalled library dependencies, so finalize right now.
-	$show "$link_command"
-	$run eval "$link_command"
-	exit_status=$?
+      prevarg="$arg"
 
-	# Delete the generated files.
-	if test -n "$dlsyms"; then
-	  $show "$rm $output_objdir/${outputname}S.${objext}"
-	  $run $rm "$output_objdir/${outputname}S.${objext}"
+      case $arg in
+      -all-static)
+	if test -n "$link_static_flag"; then
+	  # See comment for -static flag below, for more details.
+	  func_append compile_command " $link_static_flag"
+	  func_append finalize_command " $link_static_flag"
 	fi
+	continue
+	;;
 
-	exit $exit_status
-      fi
-
-      if test -n "$shlibpath_var"; then
-	# We should set the shlibpath_var
-	rpath=
-	for dir in $temp_rpath; do
-	  case $dir in
-	  [\\/]* | [A-Za-z]:[\\/]*)
-	    # Absolute path.
-	    rpath="$rpath$dir:"
-	    ;;
-	  *)
-	    # Relative path: add a thisdir entry.
-	    rpath="$rpath\$thisdir/$dir:"
-	    ;;
-	  esac
-	done
-	temp_rpath="$rpath"
-      fi
+      -allow-undefined)
+	# FIXME: remove this flag sometime in the future.
+	func_fatal_error "\`-allow-undefined' must not be used because it is the default"
+	;;
 
-      if test -n "$compile_shlibpath$finalize_shlibpath"; then
-	compile_command="$shlibpath_var=\"$compile_shlibpath$finalize_shlibpath\$$shlibpath_var\" $compile_command"
-      fi
-      if test -n "$finalize_shlibpath"; then
-	finalize_command="$shlibpath_var=\"$finalize_shlibpath\$$shlibpath_var\" $finalize_command"
-      fi
+      -avoid-version)
+	avoid_version=yes
+	continue
+	;;
 
-      compile_var=
-      finalize_var=
-      if test -n "$runpath_var"; then
-	if test -n "$perm_rpath"; then
-	  # We should set the runpath_var.
-	  rpath=
-	  for dir in $perm_rpath; do
-	    rpath="$rpath$dir:"
-	  done
-	  compile_var="$runpath_var=\"$rpath\$$runpath_var\" "
-	fi
-	if test -n "$finalize_perm_rpath"; then
-	  # We should set the runpath_var.
-	  rpath=
-	  for dir in $finalize_perm_rpath; do
-	    rpath="$rpath$dir:"
-	  done
-	  finalize_var="$runpath_var=\"$rpath\$$runpath_var\" "
-	fi
-      fi
+      -dlopen)
+	prev=dlfiles
+	continue
+	;;
 
-      if test "$no_install" = yes; then
-	# We don't need to create a wrapper script.
-	link_command="$compile_var$compile_command$compile_rpath"
-	# Replace the output file specification.
-	link_command=`$echo "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'`
-	# Delete the old output file.
-	$run $rm $output
-	# Link the executable and exit
-	$show "$link_command"
-	$run eval "$link_command" || exit $?
-	exit $EXIT_SUCCESS
-      fi
+      -dlpreopen)
+	prev=dlprefiles
+	continue
+	;;
 
-      if test "$hardcode_action" = relink; then
-	# Fast installation is not supported
-	link_command="$compile_var$compile_command$compile_rpath"
-	relink_command="$finalize_var$finalize_command$finalize_rpath"
+      -export-dynamic)
+	export_dynamic=yes
+	continue
+	;;
 
-	$echo "$modename: warning: this platform does not like uninstalled shared libraries" 1>&2
-	$echo "$modename: \`$output' will be relinked during installation" 1>&2
-      else
-	if test "$fast_install" != no; then
-	  link_command="$finalize_var$compile_command$finalize_rpath"
-	  if test "$fast_install" = yes; then
-	    relink_command=`$echo "X$compile_var$compile_command$compile_rpath" | $SP2NL | $Xsed -e 's%@OUTPUT@%\$progdir/\$file%g' | $NL2SP`
-	  else
-	    # fast_install is set to needless
-	    relink_command=
-	  fi
+      -export-symbols | -export-symbols-regex)
+	if test -n "$export_symbols" || test -n "$export_symbols_regex"; then
+	  func_fatal_error "more than one -exported-symbols argument is not allowed"
+	fi
+	if test "X$arg" = "X-export-symbols"; then
+	  prev=expsyms
 	else
-	  link_command="$compile_var$compile_command$compile_rpath"
-	  relink_command="$finalize_var$finalize_command$finalize_rpath"
+	  prev=expsyms_regex
 	fi
-      fi
-
-      # Replace the output file specification.
-      link_command=`$echo "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'`
+	continue
+	;;
 
-      # Delete the old output files.
-      $run $rm $output $output_objdir/$outputname $output_objdir/lt-$outputname
+      -framework)
+	prev=framework
+	continue
+	;;
 
-      $show "$link_command"
-      $run eval "$link_command" || exit $?
+      -inst-prefix-dir)
+	prev=inst_prefix
+	continue
+	;;
 
-      # Now create the wrapper script.
-      $show "creating $output"
+      # The native IRIX linker understands -LANG:*, -LIST:* and -LNO:*
+      # so, if we see these flags be careful not to treat them like -L
+      -L[A-Z][A-Z]*:*)
+	case $with_gcc/$host in
+	no/*-*-irix* | /*-*-irix*)
+	  func_append compile_command " $arg"
+	  func_append finalize_command " $arg"
+	  ;;
+	esac
+	continue
+	;;
 
-      # Quote the relink command for shipping.
-      if test -n "$relink_command"; then
-	# Preserve any variables that may affect compiler behavior
-	for var in $variables_saved_for_relink; do
-	  if eval test -z \"\${$var+set}\"; then
-	    relink_command="{ test -z \"\${$var+set}\" || unset $var || { $var=; export $var; }; }; $relink_command"
-	  elif eval var_value=\$$var; test -z "$var_value"; then
-	    relink_command="$var=; export $var; $relink_command"
+      -L*)
+	func_stripname '-L' '' "$arg"
+	dir=$func_stripname_result
+	if test -z "$dir"; then
+	  if test "$#" -gt 0; then
+	    func_fatal_error "require no space between \`-L' and \`$1'"
 	  else
-	    var_value=`$echo "X$var_value" | $Xsed -e "$sed_quote_subst"`
-	    relink_command="$var=\"$var_value\"; export $var; $relink_command"
+	    func_fatal_error "need path for \`-L' option"
 	  fi
-	done
-	relink_command="(cd `pwd`; $relink_command)"
-	relink_command=`$echo "X$relink_command" | $SP2NL | $Xsed -e "$sed_quote_subst" | $NL2SP`
-      fi
-
-      # Quote $echo for shipping.
-      if test "X$echo" = "X$SHELL $progpath --fallback-echo"; then
-	case $progpath in
-	[\\/]* | [A-Za-z]:[\\/]*) qecho="$SHELL $progpath --fallback-echo";;
-	*) qecho="$SHELL `pwd`/$progpath --fallback-echo";;
+	fi
+	# We need an absolute path.
+	case $dir in
+	[\\/]* | [A-Za-z]:[\\/]*) ;;
+	*)
+	  absdir=`cd "$dir" && pwd`
+	  test -z "$absdir" && \
+	    func_fatal_error "cannot determine absolute directory name of \`$dir'"
+	  dir="$absdir"
+	  ;;
 	esac
-	qecho=`$echo "X$qecho" | $Xsed -e "$sed_quote_subst"`
-      else
-	qecho=`$echo "X$echo" | $Xsed -e "$sed_quote_subst"`
-      fi
-
-      # Only actually do things if our run command is non-null.
-      if test -z "$run"; then
-	# win32 will think the script is a binary if it has
-	# a .exe suffix, so we strip it off here.
-	case $output in
-	  *.exe) output=`$echo $output|${SED} 's,.exe$,,'` ;;
+	case "$deplibs " in
+	*" -L$dir "*) ;;
+	*)
+	  deplibs="$deplibs -L$dir"
+	  lib_search_path="$lib_search_path $dir"
+	  ;;
 	esac
-	# test for cygwin because mv fails w/o .exe extensions
 	case $host in
-	  *cygwin*)
-	    exeext=.exe
-	    outputname=`$echo $outputname|${SED} 's,.exe$,,'` ;;
-	  *) exeext= ;;
+	*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)
+	  testbindir=`$ECHO "X$dir" | $Xsed -e 's*/lib$*/bin*'`
+	  case :$dllsearchpath: in
+	  *":$dir:"*) ;;
+	  ::) dllsearchpath=$dir;;
+	  *) dllsearchpath="$dllsearchpath:$dir";;
+	  esac
+	  case :$dllsearchpath: in
+	  *":$testbindir:"*) ;;
+	  ::) dllsearchpath=$testbindir;;
+	  *) dllsearchpath="$dllsearchpath:$testbindir";;
+	  esac
+	  ;;
 	esac
-	case $host in
-	  *cygwin* | *mingw* )
-            output_name=`basename $output`
-            output_path=`dirname $output`
-            cwrappersource="$output_path/$objdir/lt-$output_name.c"
-            cwrapper="$output_path/$output_name.exe"
-            $rm $cwrappersource $cwrapper
-            trap "$rm $cwrappersource $cwrapper; exit $EXIT_FAILURE" 1 2 15
-
-	    cat > $cwrappersource <<EOF
-
-/* $cwrappersource - temporary wrapper executable for $objdir/$outputname
-   Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP
-
-   The $output program cannot be directly executed until all the libtool
-   libraries that it depends on are installed.
+	continue
+	;;
 
-   This wrapper executable should never be moved out of the build directory.
-   If it is, it will not operate correctly.
+      -l*)
+	if test "X$arg" = "X-lc" || test "X$arg" = "X-lm"; then
+	  case $host in
+	  *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos* | *-cegcc*)
+	    # These systems don't actually have a C or math library (as such)
+	    continue
+	    ;;
+	  *-*-os2*)
+	    # These systems don't actually have a C library (as such)
+	    test "X$arg" = "X-lc" && continue
+	    ;;
+	  *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
+	    # Do not include libc due to us having libc/libc_r.
+	    test "X$arg" = "X-lc" && continue
+	    ;;
+	  *-*-rhapsody* | *-*-darwin1.[012])
+	    # Rhapsody C and math libraries are in the System framework
+	    deplibs="$deplibs System.ltframework"
+	    continue
+	    ;;
+	  *-*-sco3.2v5* | *-*-sco5v6*)
+	    # Causes problems with __ctype
+	    test "X$arg" = "X-lc" && continue
+	    ;;
+	  *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*)
+	    # Compiler inserts libc in the correct place for threads to work
+	    test "X$arg" = "X-lc" && continue
+	    ;;
+	  esac
+	elif test "X$arg" = "X-lc_r"; then
+	 case $host in
+	 *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
+	   # Do not include libc_r directly, use -pthread flag.
+	   continue
+	   ;;
+	 esac
+	fi
+	deplibs="$deplibs $arg"
+	continue
+	;;
 
-   Currently, it simply execs the wrapper *script* "/bin/sh $output",
-   but could eventually absorb all of the scripts functionality and
-   exec $objdir/$outputname directly.
-*/
-EOF
-	    cat >> $cwrappersource<<"EOF"
-#include <stdio.h>
-#include <stdlib.h>
-#include <unistd.h>
-#include <malloc.h>
-#include <stdarg.h>
-#include <assert.h>
-#include <string.h>
-#include <ctype.h>
-#include <sys/stat.h>
+      -module)
+	module=yes
+	continue
+	;;
 
-#if defined(PATH_MAX)
-# define LT_PATHMAX PATH_MAX
-#elif defined(MAXPATHLEN)
-# define LT_PATHMAX MAXPATHLEN
-#else
-# define LT_PATHMAX 1024
-#endif
+      # Tru64 UNIX uses -model [arg] to determine the layout of C++
+      # classes, name mangling, and exception handling.
+      # Darwin uses the -arch flag to determine output architecture.
+      -model|-arch|-isysroot)
+	compiler_flags="$compiler_flags $arg"
+	func_append compile_command " $arg"
+	func_append finalize_command " $arg"
+	prev=xcompiler
+	continue
+	;;
 
-#ifndef DIR_SEPARATOR
-# define DIR_SEPARATOR '/'
-# define PATH_SEPARATOR ':'
-#endif
+      -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe|-threads)
+	compiler_flags="$compiler_flags $arg"
+	func_append compile_command " $arg"
+	func_append finalize_command " $arg"
+	case "$new_inherited_linker_flags " in
+	    *" $arg "*) ;;
+	    * ) new_inherited_linker_flags="$new_inherited_linker_flags $arg" ;;
+	esac
+	continue
+	;;
 
-#if defined (_WIN32) || defined (__MSDOS__) || defined (__DJGPP__) || \
-  defined (__OS2__)
-# define HAVE_DOS_BASED_FILE_SYSTEM
-# ifndef DIR_SEPARATOR_2
-#  define DIR_SEPARATOR_2 '\\'
-# endif
-# ifndef PATH_SEPARATOR_2
-#  define PATH_SEPARATOR_2 ';'
-# endif
-#endif
+      -multi_module)
+	single_module="${wl}-multi_module"
+	continue
+	;;
 
-#ifndef DIR_SEPARATOR_2
-# define IS_DIR_SEPARATOR(ch) ((ch) == DIR_SEPARATOR)
-#else /* DIR_SEPARATOR_2 */
-# define IS_DIR_SEPARATOR(ch) \
-        (((ch) == DIR_SEPARATOR) || ((ch) == DIR_SEPARATOR_2))
-#endif /* DIR_SEPARATOR_2 */
+      -no-fast-install)
+	fast_install=no
+	continue
+	;;
 
-#ifndef PATH_SEPARATOR_2
-# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR)
-#else /* PATH_SEPARATOR_2 */
-# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR_2)
-#endif /* PATH_SEPARATOR_2 */
+      -no-install)
+	case $host in
+	*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-darwin* | *-cegcc*)
+	  # The PATH hackery in wrapper scripts is required on Windows
+	  # and Darwin in order for the loader to find any dlls it needs.
+	  func_warning "\`-no-install' is ignored for $host"
+	  func_warning "assuming \`-no-fast-install' instead"
+	  fast_install=no
+	  ;;
+	*) no_install=yes ;;
+	esac
+	continue
+	;;
 
-#define XMALLOC(type, num)      ((type *) xmalloc ((num) * sizeof(type)))
-#define XFREE(stale) do { \
-  if (stale) { free ((void *) stale); stale = 0; } \
-} while (0)
+      -no-undefined)
+	allow_undefined=no
+	continue
+	;;
 
-/* -DDEBUG is fairly common in CFLAGS.  */
-#undef DEBUG
-#if defined DEBUGWRAPPER
-# define DEBUG(format, ...) fprintf(stderr, format, __VA_ARGS__)
-#else
-# define DEBUG(format, ...)
-#endif
+      -objectlist)
+	prev=objectlist
+	continue
+	;;
 
-const char *program_name = NULL;
+      -o) prev=output ;;
 
-void * xmalloc (size_t num);
-char * xstrdup (const char *string);
-const char * base_name (const char *name);
-char * find_executable(const char *wrapper);
-int    check_executable(const char *path);
-char * strendzap(char *str, const char *pat);
-void lt_fatal (const char *message, ...);
+      -precious-files-regex)
+	prev=precious_regex
+	continue
+	;;
 
-int
-main (int argc, char *argv[])
-{
-  char **newargz;
-  int i;
+      -release)
+	prev=release
+	continue
+	;;
 
-  program_name = (char *) xstrdup (base_name (argv[0]));
-  DEBUG("(main) argv[0]      : %s\n",argv[0]);
-  DEBUG("(main) program_name : %s\n",program_name);
-  newargz = XMALLOC(char *, argc+2);
-EOF
+      -rpath)
+	prev=rpath
+	continue
+	;;
 
-            cat >> $cwrappersource <<EOF
-  newargz[0] = (char *) xstrdup("$SHELL");
-EOF
+      -R)
+	prev=xrpath
+	continue
+	;;
 
-            cat >> $cwrappersource <<"EOF"
-  newargz[1] = find_executable(argv[0]);
-  if (newargz[1] == NULL)
-    lt_fatal("Couldn't find %s", argv[0]);
-  DEBUG("(main) found exe at : %s\n",newargz[1]);
-  /* we know the script has the same name, without the .exe */
-  /* so make sure newargz[1] doesn't end in .exe */
-  strendzap(newargz[1],".exe");
-  for (i = 1; i < argc; i++)
-    newargz[i+1] = xstrdup(argv[i]);
-  newargz[argc+1] = NULL;
+      -R*)
+	func_stripname '-R' '' "$arg"
+	dir=$func_stripname_result
+	# We need an absolute path.
+	case $dir in
+	[\\/]* | [A-Za-z]:[\\/]*) ;;
+	*)
+	  func_fatal_error "only absolute run-paths are allowed"
+	  ;;
+	esac
+	case "$xrpath " in
+	*" $dir "*) ;;
+	*) xrpath="$xrpath $dir" ;;
+	esac
+	continue
+	;;
 
-  for (i=0; i<argc+1; i++)
-  {
-    DEBUG("(main) newargz[%d]   : %s\n",i,newargz[i]);
-    ;
-  }
+      -shared)
+	# The effects of -shared are defined in a previous loop.
+	continue
+	;;
 
-EOF
+      -shrext)
+	prev=shrext
+	continue
+	;;
 
-            case $host_os in
-              mingw*)
-                cat >> $cwrappersource <<EOF
-  execv("$SHELL",(char const **)newargz);
-EOF
-              ;;
-              *)
-                cat >> $cwrappersource <<EOF
-  execv("$SHELL",newargz);
-EOF
-              ;;
-            esac
+      -static | -static-libtool-libs)
+	# The effects of -static are defined in a previous loop.
+	# We used to do the same as -all-static on platforms that
+	# didn't have a PIC flag, but the assumption that the effects
+	# would be equivalent was wrong.  It would break on at least
+	# Digital Unix and AIX.
+	continue
+	;;
 
-            cat >> $cwrappersource <<"EOF"
-  return 127;
-}
+      -thread-safe)
+	thread_safe=yes
+	continue
+	;;
 
-void *
-xmalloc (size_t num)
-{
-  void * p = (void *) malloc (num);
-  if (!p)
-    lt_fatal ("Memory exhausted");
+      -version-info)
+	prev=vinfo
+	continue
+	;;
 
-  return p;
-}
+      -version-number)
+	prev=vinfo
+	vinfo_number=yes
+	continue
+	;;
 
-char *
-xstrdup (const char *string)
-{
-  return string ? strcpy ((char *) xmalloc (strlen (string) + 1), string) : NULL
-;
-}
+      -weak)
+        prev=weak
+	continue
+	;;
 
-const char *
-base_name (const char *name)
-{
-  const char *base;
+      -Wc,*)
+	func_stripname '-Wc,' '' "$arg"
+	args=$func_stripname_result
+	arg=
+	save_ifs="$IFS"; IFS=','
+	for flag in $args; do
+	  IFS="$save_ifs"
+          func_quote_for_eval "$flag"
+	  arg="$arg $wl$func_quote_for_eval_result"
+	  compiler_flags="$compiler_flags $func_quote_for_eval_result"
+	done
+	IFS="$save_ifs"
+	func_stripname ' ' '' "$arg"
+	arg=$func_stripname_result
+	;;
 
-#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
-  /* Skip over the disk name in MSDOS pathnames. */
-  if (isalpha ((unsigned char)name[0]) && name[1] == ':')
-    name += 2;
-#endif
+      -Wl,*)
+	func_stripname '-Wl,' '' "$arg"
+	args=$func_stripname_result
+	arg=
+	save_ifs="$IFS"; IFS=','
+	for flag in $args; do
+	  IFS="$save_ifs"
+          func_quote_for_eval "$flag"
+	  arg="$arg $wl$func_quote_for_eval_result"
+	  compiler_flags="$compiler_flags $wl$func_quote_for_eval_result"
+	  linker_flags="$linker_flags $func_quote_for_eval_result"
+	done
+	IFS="$save_ifs"
+	func_stripname ' ' '' "$arg"
+	arg=$func_stripname_result
+	;;
 
-  for (base = name; *name; name++)
-    if (IS_DIR_SEPARATOR (*name))
-      base = name + 1;
-  return base;
-}
+      -Xcompiler)
+	prev=xcompiler
+	continue
+	;;
 
-int
-check_executable(const char * path)
-{
-  struct stat st;
+      -Xlinker)
+	prev=xlinker
+	continue
+	;;
 
-  DEBUG("(check_executable)  : %s\n", path ? (*path ? path : "EMPTY!") : "NULL!");
-  if ((!path) || (!*path))
-    return 0;
-
-  if ((stat (path, &st) >= 0) &&
-      (
-        /* MinGW & native WIN32 do not support S_IXOTH or S_IXGRP */
-#if defined (S_IXOTH)
-       ((st.st_mode & S_IXOTH) == S_IXOTH) ||
-#endif
-#if defined (S_IXGRP)
-       ((st.st_mode & S_IXGRP) == S_IXGRP) ||
-#endif
-       ((st.st_mode & S_IXUSR) == S_IXUSR))
-      )
-    return 1;
-  else
-    return 0;
-}
+      -XCClinker)
+	prev=xcclinker
+	continue
+	;;
 
-/* Searches for the full path of the wrapper.  Returns
-   newly allocated full path name if found, NULL otherwise */
-char *
-find_executable (const char* wrapper)
-{
-  int has_slash = 0;
-  const char* p;
-  const char* p_next;
-  /* static buffer for getcwd */
-  char tmp[LT_PATHMAX + 1];
-  int tmp_len;
-  char* concat_name;
+      # -msg_* for osf cc
+      -msg_*)
+	func_quote_for_eval "$arg"
+	arg="$func_quote_for_eval_result"
+	;;
 
-  DEBUG("(find_executable)  : %s\n", wrapper ? (*wrapper ? wrapper : "EMPTY!") : "NULL!");
+      # -64, -mips[0-9] enable 64-bit mode on the SGI compiler
+      # -r[0-9][0-9]* specifies the processor on the SGI compiler
+      # -xarch=*, -xtarget=* enable 64-bit mode on the Sun compiler
+      # +DA*, +DD* enable 64-bit mode on the HP compiler
+      # -q* pass through compiler args for the IBM compiler
+      # -m*, -t[45]*, -txscale* pass through architecture-specific
+      # compiler args for GCC
+      # -F/path gives path to uninstalled frameworks, gcc on darwin
+      # -p, -pg, --coverage, -fprofile-* pass through profiling flag for GCC
+      # @file GCC response files
+      -64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*| \
+      -t[45]*|-txscale*|-p|-pg|--coverage|-fprofile-*|-F*|@*)
+        func_quote_for_eval "$arg"
+	arg="$func_quote_for_eval_result"
+        func_append compile_command " $arg"
+        func_append finalize_command " $arg"
+        compiler_flags="$compiler_flags $arg"
+        continue
+        ;;
 
-  if ((wrapper == NULL) || (*wrapper == '\0'))
-    return NULL;
+      # Some other compiler flag.
+      -* | +*)
+        func_quote_for_eval "$arg"
+	arg="$func_quote_for_eval_result"
+	;;
 
-  /* Absolute path? */
-#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
-  if (isalpha ((unsigned char)wrapper[0]) && wrapper[1] == ':')
-  {
-    concat_name = xstrdup (wrapper);
-    if (check_executable(concat_name))
-      return concat_name;
-    XFREE(concat_name);
-  }
-  else
-  {
-#endif
-    if (IS_DIR_SEPARATOR (wrapper[0]))
-    {
-      concat_name = xstrdup (wrapper);
-      if (check_executable(concat_name))
-        return concat_name;
-      XFREE(concat_name);
-    }
-#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
-  }
-#endif
+      *.$objext)
+	# A standard object.
+	objs="$objs $arg"
+	;;
 
-  for (p = wrapper; *p; p++)
-    if (*p == '/')
-    {
-      has_slash = 1;
-      break;
-    }
-  if (!has_slash)
-  {
-    /* no slashes; search PATH */
-    const char* path = getenv ("PATH");
-    if (path != NULL)
-    {
-      for (p = path; *p; p = p_next)
-      {
-        const char* q;
-        size_t p_len;
-        for (q = p; *q; q++)
-          if (IS_PATH_SEPARATOR(*q))
-            break;
-        p_len = q - p;
-        p_next = (*q == '\0' ? q : q + 1);
-        if (p_len == 0)
-        {
-          /* empty path: current directory */
-          if (getcwd (tmp, LT_PATHMAX) == NULL)
-            lt_fatal ("getcwd failed");
-          tmp_len = strlen(tmp);
-          concat_name = XMALLOC(char, tmp_len + 1 + strlen(wrapper) + 1);
-          memcpy (concat_name, tmp, tmp_len);
-          concat_name[tmp_len] = '/';
-          strcpy (concat_name + tmp_len + 1, wrapper);
-        }
-        else
-        {
-          concat_name = XMALLOC(char, p_len + 1 + strlen(wrapper) + 1);
-          memcpy (concat_name, p, p_len);
-          concat_name[p_len] = '/';
-          strcpy (concat_name + p_len + 1, wrapper);
-        }
-        if (check_executable(concat_name))
-          return concat_name;
-        XFREE(concat_name);
-      }
-    }
-    /* not found in PATH; assume curdir */
-  }
-  /* Relative path | not found in path: prepend cwd */
-  if (getcwd (tmp, LT_PATHMAX) == NULL)
-    lt_fatal ("getcwd failed");
-  tmp_len = strlen(tmp);
-  concat_name = XMALLOC(char, tmp_len + 1 + strlen(wrapper) + 1);
-  memcpy (concat_name, tmp, tmp_len);
-  concat_name[tmp_len] = '/';
-  strcpy (concat_name + tmp_len + 1, wrapper);
+      *.lo)
+	# A libtool-controlled object.
 
-  if (check_executable(concat_name))
-    return concat_name;
-  XFREE(concat_name);
-  return NULL;
-}
+	# Check to see that this really is a libtool object.
+	if func_lalib_unsafe_p "$arg"; then
+	  pic_object=
+	  non_pic_object=
 
-char *
-strendzap(char *str, const char *pat)
-{
-  size_t len, patlen;
+	  # Read the .lo file
+	  func_source "$arg"
 
-  assert(str != NULL);
-  assert(pat != NULL);
+	  if test -z "$pic_object" ||
+	     test -z "$non_pic_object" ||
+	     test "$pic_object" = none &&
+	     test "$non_pic_object" = none; then
+	    func_fatal_error "cannot find name of object for \`$arg'"
+	  fi
 
-  len = strlen(str);
-  patlen = strlen(pat);
+	  # Extract subdirectory from the argument.
+	  func_dirname "$arg" "/" ""
+	  xdir="$func_dirname_result"
 
-  if (patlen <= len)
-  {
-    str += len - patlen;
-    if (strcmp(str, pat) == 0)
-      *str = '\0';
-  }
-  return str;
-}
+	  if test "$pic_object" != none; then
+	    # Prepend the subdirectory the object is found in.
+	    pic_object="$xdir$pic_object"
 
-static void
-lt_error_core (int exit_status, const char * mode,
-          const char * message, va_list ap)
-{
-  fprintf (stderr, "%s: %s: ", program_name, mode);
-  vfprintf (stderr, message, ap);
-  fprintf (stderr, ".\n");
+	    if test "$prev" = dlfiles; then
+	      if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
+		dlfiles="$dlfiles $pic_object"
+		prev=
+		continue
+	      else
+		# If libtool objects are unsupported, then we need to preload.
+		prev=dlprefiles
+	      fi
+	    fi
 
-  if (exit_status >= 0)
-    exit (exit_status);
-}
+	    # CHECK ME:  I think I busted this.  -Ossama
+	    if test "$prev" = dlprefiles; then
+	      # Preload the old-style object.
+	      dlprefiles="$dlprefiles $pic_object"
+	      prev=
+	    fi
 
-void
-lt_fatal (const char *message, ...)
-{
-  va_list ap;
-  va_start (ap, message);
-  lt_error_core (EXIT_FAILURE, "FATAL", message, ap);
-  va_end (ap);
-}
-EOF
-          # we should really use a build-platform specific compiler
-          # here, but OTOH, the wrappers (shell script and this C one)
-          # are only useful if you want to execute the "real" binary.
-          # Since the "real" binary is built for $host, then this
-          # wrapper might as well be built for $host, too.
-          $run $LTCC $LTCFLAGS -s -o $cwrapper $cwrappersource
-          ;;
-        esac
-        $rm $output
-        trap "$rm $output; exit $EXIT_FAILURE" 1 2 15
+	    # A PIC object.
+	    func_append libobjs " $pic_object"
+	    arg="$pic_object"
+	  fi
 
-	$echo > $output "\
-#! $SHELL
+	  # Non-PIC object.
+	  if test "$non_pic_object" != none; then
+	    # Prepend the subdirectory the object is found in.
+	    non_pic_object="$xdir$non_pic_object"
 
-# $output - temporary wrapper script for $objdir/$outputname
-# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP
-#
-# The $output program cannot be directly executed until all the libtool
-# libraries that it depends on are installed.
-#
-# This wrapper script should never be moved out of the build directory.
-# If it is, it will not operate correctly.
+	    # A standard non-PIC object
+	    func_append non_pic_objects " $non_pic_object"
+	    if test -z "$pic_object" || test "$pic_object" = none ; then
+	      arg="$non_pic_object"
+	    fi
+	  else
+	    # If the PIC object exists, use it instead.
+	    # $xdir was prepended to $pic_object above.
+	    non_pic_object="$pic_object"
+	    func_append non_pic_objects " $non_pic_object"
+	  fi
+	else
+	  # Only an error if not doing a dry-run.
+	  if $opt_dry_run; then
+	    # Extract subdirectory from the argument.
+	    func_dirname "$arg" "/" ""
+	    xdir="$func_dirname_result"
 
-# Sed substitution that helps us do robust quoting.  It backslashifies
-# metacharacters that are still active within double-quoted strings.
-Xsed='${SED} -e 1s/^X//'
-sed_quote_subst='$sed_quote_subst'
+	    func_lo2o "$arg"
+	    pic_object=$xdir$objdir/$func_lo2o_result
+	    non_pic_object=$xdir$func_lo2o_result
+	    func_append libobjs " $pic_object"
+	    func_append non_pic_objects " $non_pic_object"
+	  else
+	    func_fatal_error "\`$arg' is not a valid libtool object"
+	  fi
+	fi
+	;;
 
-# Be Bourne compatible (taken from Autoconf:_AS_BOURNE_COMPATIBLE).
-if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then
-  emulate sh
-  NULLCMD=:
-  # Zsh 3.x and 4.x performs word splitting on \${1+\"\$@\"}, which
-  # is contrary to our usage.  Disable this feature.
-  alias -g '\${1+\"\$@\"}'='\"\$@\"'
-  setopt NO_GLOB_SUBST
-else
-  case \`(set -o) 2>/dev/null\` in *posix*) set -o posix;; esac
-fi
-BIN_SH=xpg4; export BIN_SH # for Tru64
-DUALCASE=1; export DUALCASE # for MKS sh
+      *.$libext)
+	# An archive.
+	deplibs="$deplibs $arg"
+	old_deplibs="$old_deplibs $arg"
+	continue
+	;;
 
-# The HP-UX ksh and POSIX shell print the target directory to stdout
-# if CDPATH is set.
-(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+      *.la)
+	# A libtool-controlled library.
 
-relink_command=\"$relink_command\"
+	if test "$prev" = dlfiles; then
+	  # This library was specified with -dlopen.
+	  dlfiles="$dlfiles $arg"
+	  prev=
+	elif test "$prev" = dlprefiles; then
+	  # The library was specified with -dlpreopen.
+	  dlprefiles="$dlprefiles $arg"
+	  prev=
+	else
+	  deplibs="$deplibs $arg"
+	fi
+	continue
+	;;
 
-# This environment variable determines our operation mode.
-if test \"\$libtool_install_magic\" = \"$magic\"; then
-  # install mode needs the following variable:
-  notinst_deplibs='$notinst_deplibs'
-else
-  # When we are sourced in execute mode, \$file and \$echo are already set.
-  if test \"\$libtool_execute_magic\" != \"$magic\"; then
-    echo=\"$qecho\"
-    file=\"\$0\"
-    # Make sure echo works.
-    if test \"X\$1\" = X--no-reexec; then
-      # Discard the --no-reexec flag, and continue.
-      shift
-    elif test \"X\`(\$echo '\t') 2>/dev/null\`\" = 'X\t'; then
-      # Yippee, \$echo works!
-      :
-    else
-      # Restart under the correct shell, and then maybe \$echo will work.
-      exec $SHELL \"\$0\" --no-reexec \${1+\"\$@\"}
-    fi
-  fi\
-"
-	$echo >> $output "\
+      # Some other compiler argument.
+      *)
+	# Unknown arguments in both finalize_command and compile_command need
+	# to be aesthetically quoted because they are evaled later.
+	func_quote_for_eval "$arg"
+	arg="$func_quote_for_eval_result"
+	;;
+      esac # arg
 
-  # Find the directory that this script lives in.
-  thisdir=\`\$echo \"X\$file\" | \$Xsed -e 's%/[^/]*$%%'\`
-  test \"x\$thisdir\" = \"x\$file\" && thisdir=.
+      # Now actually substitute the argument into the commands.
+      if test -n "$arg"; then
+	func_append compile_command " $arg"
+	func_append finalize_command " $arg"
+      fi
+    done # argument parsing loop
 
-  # Follow symbolic links until we get to the real thisdir.
-  file=\`ls -ld \"\$file\" | ${SED} -n 's/.*-> //p'\`
-  while test -n \"\$file\"; do
-    destdir=\`\$echo \"X\$file\" | \$Xsed -e 's%/[^/]*\$%%'\`
+    test -n "$prev" && \
+      func_fatal_help "the \`$prevarg' option requires an argument"
 
-    # If there was a directory component, then change thisdir.
-    if test \"x\$destdir\" != \"x\$file\"; then
-      case \"\$destdir\" in
-      [\\\\/]* | [A-Za-z]:[\\\\/]*) thisdir=\"\$destdir\" ;;
-      *) thisdir=\"\$thisdir/\$destdir\" ;;
-      esac
+    if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then
+      eval arg=\"$export_dynamic_flag_spec\"
+      func_append compile_command " $arg"
+      func_append finalize_command " $arg"
     fi
 
-    file=\`\$echo \"X\$file\" | \$Xsed -e 's%^.*/%%'\`
-    file=\`ls -ld \"\$thisdir/\$file\" | ${SED} -n 's/.*-> //p'\`
-  done
+    oldlibs=
+    # calculate the name of the file, without its directory
+    func_basename "$output"
+    outputname="$func_basename_result"
+    libobjs_save="$libobjs"
 
-  # Try to get the absolute directory name.
-  absdir=\`cd \"\$thisdir\" && pwd\`
-  test -n \"\$absdir\" && thisdir=\"\$absdir\"
-"
+    if test -n "$shlibpath_var"; then
+      # get the directories listed in $shlibpath_var
+      eval shlib_search_path=\`\$ECHO \"X\${$shlibpath_var}\" \| \$Xsed -e \'s/:/ /g\'\`
+    else
+      shlib_search_path=
+    fi
+    eval sys_lib_search_path=\"$sys_lib_search_path_spec\"
+    eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\"
+
+    func_dirname "$output" "/" ""
+    output_objdir="$func_dirname_result$objdir"
+    # Create the object directory.
+    func_mkdir_p "$output_objdir"
+
+    # Determine the type of output
+    case $output in
+    "")
+      func_fatal_help "you must specify an output file"
+      ;;
+    *.$libext) linkmode=oldlib ;;
+    *.lo | *.$objext) linkmode=obj ;;
+    *.la) linkmode=lib ;;
+    *) linkmode=prog ;; # Anything else should be a program.
+    esac
+
+    specialdeplibs=
+
+    libs=
+    # Find all interdependent deplibs by searching for libraries
+    # that are linked more than once (e.g. -la -lb -la)
+    for deplib in $deplibs; do
+      if $opt_duplicate_deps ; then
+	case "$libs " in
+	*" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
+	esac
+      fi
+      libs="$libs $deplib"
+    done
+
+    if test "$linkmode" = lib; then
+      libs="$predeps $libs $compiler_lib_search_path $postdeps"
+
+      # Compute libraries that are listed more than once in $predeps
+      # $postdeps and mark them as special (i.e., whose duplicates are
+      # not to be eliminated).
+      pre_post_deps=
+      if $opt_duplicate_compiler_generated_deps; then
+	for pre_post_dep in $predeps $postdeps; do
+	  case "$pre_post_deps " in
+	  *" $pre_post_dep "*) specialdeplibs="$specialdeplibs $pre_post_deps" ;;
+	  esac
+	  pre_post_deps="$pre_post_deps $pre_post_dep"
+	done
+      fi
+      pre_post_deps=
+    fi
+
+    deplibs=
+    newdependency_libs=
+    newlib_search_path=
+    need_relink=no # whether we're linking any uninstalled libtool libraries
+    notinst_deplibs= # not-installed libtool libraries
+    notinst_path= # paths that contain not-installed libtool libraries
+
+    case $linkmode in
+    lib)
+	passes="conv dlpreopen link"
+	for file in $dlfiles $dlprefiles; do
+	  case $file in
+	  *.la) ;;
+	  *)
+	    func_fatal_help "libraries can \`-dlopen' only libtool libraries: $file"
+	    ;;
+	  esac
+	done
+	;;
+    prog)
+	compile_deplibs=
+	finalize_deplibs=
+	alldeplibs=no
+	newdlfiles=
+	newdlprefiles=
+	passes="conv scan dlopen dlpreopen link"
+	;;
+    *)  passes="conv"
+	;;
+    esac
+
+    for pass in $passes; do
+      # The preopen pass in lib mode reverses $deplibs; put it back here
+      # so that -L comes before libs that need it for instance...
+      if test "$linkmode,$pass" = "lib,link"; then
+	## FIXME: Find the place where the list is rebuilt in the wrong
+	##        order, and fix it there properly
+        tmp_deplibs=
+	for deplib in $deplibs; do
+	  tmp_deplibs="$deplib $tmp_deplibs"
+	done
+	deplibs="$tmp_deplibs"
+      fi
+
+      if test "$linkmode,$pass" = "lib,link" ||
+	 test "$linkmode,$pass" = "prog,scan"; then
+	libs="$deplibs"
+	deplibs=
+      fi
+      if test "$linkmode" = prog; then
+	case $pass in
+	dlopen) libs="$dlfiles" ;;
+	dlpreopen) libs="$dlprefiles" ;;
+	link)
+	  libs="$deplibs %DEPLIBS%"
+	  test "X$link_all_deplibs" != Xno && libs="$libs $dependency_libs"
+	  ;;
+	esac
+      fi
+      if test "$linkmode,$pass" = "lib,dlpreopen"; then
+	# Collect and forward deplibs of preopened libtool libs
+	for lib in $dlprefiles; do
+	  # Ignore non-libtool-libs
+	  dependency_libs=
+	  case $lib in
+	  *.la)	func_source "$lib" ;;
+	  esac
+
+	  # Collect preopened libtool deplibs, except any this library
+	  # has declared as weak libs
+	  for deplib in $dependency_libs; do
+            deplib_base=`$ECHO "X$deplib" | $Xsed -e "$basename"`
+	    case " $weak_libs " in
+	    *" $deplib_base "*) ;;
+	    *) deplibs="$deplibs $deplib" ;;
+	    esac
+	  done
+	done
+	libs="$dlprefiles"
+      fi
+      if test "$pass" = dlopen; then
+	# Collect dlpreopened libraries
+	save_deplibs="$deplibs"
+	deplibs=
+      fi
+
+      for deplib in $libs; do
+	lib=
+	found=no
+	case $deplib in
+	-mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe|-threads)
+	  if test "$linkmode,$pass" = "prog,link"; then
+	    compile_deplibs="$deplib $compile_deplibs"
+	    finalize_deplibs="$deplib $finalize_deplibs"
+	  else
+	    compiler_flags="$compiler_flags $deplib"
+	    if test "$linkmode" = lib ; then
+		case "$new_inherited_linker_flags " in
+		    *" $deplib "*) ;;
+		    * ) new_inherited_linker_flags="$new_inherited_linker_flags $deplib" ;;
+		esac
+	    fi
+	  fi
+	  continue
+	  ;;
+	-l*)
+	  if test "$linkmode" != lib && test "$linkmode" != prog; then
+	    func_warning "\`-l' is ignored for archives/objects"
+	    continue
+	  fi
+	  func_stripname '-l' '' "$deplib"
+	  name=$func_stripname_result
+	  if test "$linkmode" = lib; then
+	    searchdirs="$newlib_search_path $lib_search_path $compiler_lib_search_dirs $sys_lib_search_path $shlib_search_path"
+	  else
+	    searchdirs="$newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path"
+	  fi
+	  for searchdir in $searchdirs; do
+	    for search_ext in .la $std_shrext .so .a; do
+	      # Search the libtool library
+	      lib="$searchdir/lib${name}${search_ext}"
+	      if test -f "$lib"; then
+		if test "$search_ext" = ".la"; then
+		  found=yes
+		else
+		  found=no
+		fi
+		break 2
+	      fi
+	    done
+	  done
+	  if test "$found" != yes; then
+	    # deplib doesn't seem to be a libtool library
+	    if test "$linkmode,$pass" = "prog,link"; then
+	      compile_deplibs="$deplib $compile_deplibs"
+	      finalize_deplibs="$deplib $finalize_deplibs"
+	    else
+	      deplibs="$deplib $deplibs"
+	      test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs"
+	    fi
+	    continue
+	  else # deplib is a libtool library
+	    # If $allow_libtool_libs_with_static_runtimes && $deplib is a stdlib,
+	    # We need to do some special things here, and not later.
+	    if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+	      case " $predeps $postdeps " in
+	      *" $deplib "*)
+		if func_lalib_p "$lib"; then
+		  library_names=
+		  old_library=
+		  func_source "$lib"
+		  for l in $old_library $library_names; do
+		    ll="$l"
+		  done
+		  if test "X$ll" = "X$old_library" ; then # only static version available
+		    found=no
+		    func_dirname "$lib" "" "."
+		    ladir="$func_dirname_result"
+		    lib=$ladir/$old_library
+		    if test "$linkmode,$pass" = "prog,link"; then
+		      compile_deplibs="$deplib $compile_deplibs"
+		      finalize_deplibs="$deplib $finalize_deplibs"
+		    else
+		      deplibs="$deplib $deplibs"
+		      test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs"
+		    fi
+		    continue
+		  fi
+		fi
+		;;
+	      *) ;;
+	      esac
+	    fi
+	  fi
+	  ;; # -l
+	*.ltframework)
+	  if test "$linkmode,$pass" = "prog,link"; then
+	    compile_deplibs="$deplib $compile_deplibs"
+	    finalize_deplibs="$deplib $finalize_deplibs"
+	  else
+	    deplibs="$deplib $deplibs"
+	    if test "$linkmode" = lib ; then
+		case "$new_inherited_linker_flags " in
+		    *" $deplib "*) ;;
+		    * ) new_inherited_linker_flags="$new_inherited_linker_flags $deplib" ;;
+		esac
+	    fi
+	  fi
+	  continue
+	  ;;
+	-L*)
+	  case $linkmode in
+	  lib)
+	    deplibs="$deplib $deplibs"
+	    test "$pass" = conv && continue
+	    newdependency_libs="$deplib $newdependency_libs"
+	    func_stripname '-L' '' "$deplib"
+	    newlib_search_path="$newlib_search_path $func_stripname_result"
+	    ;;
+	  prog)
+	    if test "$pass" = conv; then
+	      deplibs="$deplib $deplibs"
+	      continue
+	    fi
+	    if test "$pass" = scan; then
+	      deplibs="$deplib $deplibs"
+	    else
+	      compile_deplibs="$deplib $compile_deplibs"
+	      finalize_deplibs="$deplib $finalize_deplibs"
+	    fi
+	    func_stripname '-L' '' "$deplib"
+	    newlib_search_path="$newlib_search_path $func_stripname_result"
+	    ;;
+	  *)
+	    func_warning "\`-L' is ignored for archives/objects"
+	    ;;
+	  esac # linkmode
+	  continue
+	  ;; # -L
+	-R*)
+	  if test "$pass" = link; then
+	    func_stripname '-R' '' "$deplib"
+	    dir=$func_stripname_result
+	    # Make sure the xrpath contains only unique directories.
+	    case "$xrpath " in
+	    *" $dir "*) ;;
+	    *) xrpath="$xrpath $dir" ;;
+	    esac
+	  fi
+	  deplibs="$deplib $deplibs"
+	  continue
+	  ;;
+	*.la) lib="$deplib" ;;
+	*.$libext)
+	  if test "$pass" = conv; then
+	    deplibs="$deplib $deplibs"
+	    continue
+	  fi
+	  case $linkmode in
+	  lib)
+	    # Linking convenience modules into shared libraries is allowed,
+	    # but linking other static libraries is non-portable.
+	    case " $dlpreconveniencelibs " in
+	    *" $deplib "*) ;;
+	    *)
+	      valid_a_lib=no
+	      case $deplibs_check_method in
+		match_pattern*)
+		  set dummy $deplibs_check_method; shift
+		  match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"`
+		  if eval "\$ECHO \"X$deplib\"" 2>/dev/null | $Xsed -e 10q \
+		    | $EGREP "$match_pattern_regex" > /dev/null; then
+		    valid_a_lib=yes
+		  fi
+		;;
+		pass_all)
+		  valid_a_lib=yes
+		;;
+	      esac
+	      if test "$valid_a_lib" != yes; then
+		$ECHO
+		$ECHO "*** Warning: Trying to link with static lib archive $deplib."
+		$ECHO "*** I have the capability to make that library automatically link in when"
+		$ECHO "*** you link to this library.  But I can only do this if you have a"
+		$ECHO "*** shared version of the library, which you do not appear to have"
+		$ECHO "*** because the file extensions .$libext of this argument makes me believe"
+		$ECHO "*** that it is just a static archive that I should not use here."
+	      else
+		$ECHO
+		$ECHO "*** Warning: Linking the shared library $output against the"
+		$ECHO "*** static library $deplib is not portable!"
+		deplibs="$deplib $deplibs"
+	      fi
+	      ;;
+	    esac
+	    continue
+	    ;;
+	  prog)
+	    if test "$pass" != link; then
+	      deplibs="$deplib $deplibs"
+	    else
+	      compile_deplibs="$deplib $compile_deplibs"
+	      finalize_deplibs="$deplib $finalize_deplibs"
+	    fi
+	    continue
+	    ;;
+	  esac # linkmode
+	  ;; # *.$libext
+	*.lo | *.$objext)
+	  if test "$pass" = conv; then
+	    deplibs="$deplib $deplibs"
+	  elif test "$linkmode" = prog; then
+	    if test "$pass" = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then
+	      # If there is no dlopen support or we're linking statically,
+	      # we need to preload.
+	      newdlprefiles="$newdlprefiles $deplib"
+	      compile_deplibs="$deplib $compile_deplibs"
+	      finalize_deplibs="$deplib $finalize_deplibs"
+	    else
+	      newdlfiles="$newdlfiles $deplib"
+	    fi
+	  fi
+	  continue
+	  ;;
+	%DEPLIBS%)
+	  alldeplibs=yes
+	  continue
+	  ;;
+	esac # case $deplib
+
+	if test "$found" = yes || test -f "$lib"; then :
+	else
+	  func_fatal_error "cannot find the library \`$lib' or unhandled argument \`$deplib'"
+	fi
+
+	# Check to see that this really is a libtool archive.
+	func_lalib_unsafe_p "$lib" \
+	  || func_fatal_error "\`$lib' is not a valid libtool archive"
+
+	func_dirname "$lib" "" "."
+	ladir="$func_dirname_result"
+
+	dlname=
+	dlopen=
+	dlpreopen=
+	libdir=
+	library_names=
+	old_library=
+	inherited_linker_flags=
+	# If the library was installed with an old release of libtool,
+	# it will not redefine variables installed, or shouldnotlink
+	installed=yes
+	shouldnotlink=no
+	avoidtemprpath=
+
+
+	# Read the .la file
+	func_source "$lib"
+
+	# Convert "-framework foo" to "foo.ltframework"
+	if test -n "$inherited_linker_flags"; then
+	  tmp_inherited_linker_flags=`$ECHO "X$inherited_linker_flags" | $Xsed -e 's/-framework \([^ $]*\)/\1.ltframework/g'`
+	  for tmp_inherited_linker_flag in $tmp_inherited_linker_flags; do
+	    case " $new_inherited_linker_flags " in
+	      *" $tmp_inherited_linker_flag "*) ;;
+	      *) new_inherited_linker_flags="$new_inherited_linker_flags $tmp_inherited_linker_flag";;
+	    esac
+	  done
+	fi
+	dependency_libs=`$ECHO "X $dependency_libs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
+	if test "$linkmode,$pass" = "lib,link" ||
+	   test "$linkmode,$pass" = "prog,scan" ||
+	   { test "$linkmode" != prog && test "$linkmode" != lib; }; then
+	  test -n "$dlopen" && dlfiles="$dlfiles $dlopen"
+	  test -n "$dlpreopen" && dlprefiles="$dlprefiles $dlpreopen"
+	fi
+
+	if test "$pass" = conv; then
+	  # Only check for convenience libraries
+	  deplibs="$lib $deplibs"
+	  if test -z "$libdir"; then
+	    if test -z "$old_library"; then
+	      func_fatal_error "cannot find name of link library for \`$lib'"
+	    fi
+	    # It is a libtool convenience library, so add in its objects.
+	    convenience="$convenience $ladir/$objdir/$old_library"
+	    old_convenience="$old_convenience $ladir/$objdir/$old_library"
+	    tmp_libs=
+	    for deplib in $dependency_libs; do
+	      deplibs="$deplib $deplibs"
+	      if $opt_duplicate_deps ; then
+		case "$tmp_libs " in
+		*" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
+		esac
+	      fi
+	      tmp_libs="$tmp_libs $deplib"
+	    done
+	  elif test "$linkmode" != prog && test "$linkmode" != lib; then
+	    func_fatal_error "\`$lib' is not a convenience library"
+	  fi
+	  continue
+	fi # $pass = conv
+
+
+	# Get the name of the library we link against.
+	linklib=
+	for l in $old_library $library_names; do
+	  linklib="$l"
+	done
+	if test -z "$linklib"; then
+	  func_fatal_error "cannot find name of link library for \`$lib'"
+	fi
+
+	# This library was specified with -dlopen.
+	if test "$pass" = dlopen; then
+	  if test -z "$libdir"; then
+	    func_fatal_error "cannot -dlopen a convenience library: \`$lib'"
+	  fi
+	  if test -z "$dlname" ||
+	     test "$dlopen_support" != yes ||
+	     test "$build_libtool_libs" = no; then
+	    # If there is no dlname, no dlopen support or we're linking
+	    # statically, we need to preload.  We also need to preload any
+	    # dependent libraries so libltdl's deplib preloader doesn't
+	    # bomb out in the load deplibs phase.
+	    dlprefiles="$dlprefiles $lib $dependency_libs"
+	  else
+	    newdlfiles="$newdlfiles $lib"
+	  fi
+	  continue
+	fi # $pass = dlopen
+
+	# We need an absolute path.
+	case $ladir in
+	[\\/]* | [A-Za-z]:[\\/]*) abs_ladir="$ladir" ;;
+	*)
+	  abs_ladir=`cd "$ladir" && pwd`
+	  if test -z "$abs_ladir"; then
+	    func_warning "cannot determine absolute directory name of \`$ladir'"
+	    func_warning "passing it literally to the linker, although it might fail"
+	    abs_ladir="$ladir"
+	  fi
+	  ;;
+	esac
+	func_basename "$lib"
+	laname="$func_basename_result"
+
+	# Find the relevant object directory and library name.
+	if test "X$installed" = Xyes; then
+	  if test ! -f "$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then
+	    func_warning "library \`$lib' was moved."
+	    dir="$ladir"
+	    absdir="$abs_ladir"
+	    libdir="$abs_ladir"
+	  else
+	    dir="$libdir"
+	    absdir="$libdir"
+	  fi
+	  test "X$hardcode_automatic" = Xyes && avoidtemprpath=yes
+	else
+	  if test ! -f "$ladir/$objdir/$linklib" && test -f "$abs_ladir/$linklib"; then
+	    dir="$ladir"
+	    absdir="$abs_ladir"
+	    # Remove this search path later
+	    notinst_path="$notinst_path $abs_ladir"
+	  else
+	    dir="$ladir/$objdir"
+	    absdir="$abs_ladir/$objdir"
+	    # Remove this search path later
+	    notinst_path="$notinst_path $abs_ladir"
+	  fi
+	fi # $installed = yes
+	func_stripname 'lib' '.la' "$laname"
+	name=$func_stripname_result
+
+	# This library was specified with -dlpreopen.
+	if test "$pass" = dlpreopen; then
+	  if test -z "$libdir" && test "$linkmode" = prog; then
+	    func_fatal_error "only libraries may -dlpreopen a convenience library: \`$lib'"
+	  fi
+	  # Prefer using a static library (so that no silly _DYNAMIC symbols
+	  # are required to link).
+	  if test -n "$old_library"; then
+	    newdlprefiles="$newdlprefiles $dir/$old_library"
+	    # Keep a list of preopened convenience libraries to check
+	    # that they are being used correctly in the link pass.
+	    test -z "$libdir" && \
+		dlpreconveniencelibs="$dlpreconveniencelibs $dir/$old_library"
+	  # Otherwise, use the dlname, so that lt_dlopen finds it.
+	  elif test -n "$dlname"; then
+	    newdlprefiles="$newdlprefiles $dir/$dlname"
+	  else
+	    newdlprefiles="$newdlprefiles $dir/$linklib"
+	  fi
+	fi # $pass = dlpreopen
+
+	if test -z "$libdir"; then
+	  # Link the convenience library
+	  if test "$linkmode" = lib; then
+	    deplibs="$dir/$old_library $deplibs"
+	  elif test "$linkmode,$pass" = "prog,link"; then
+	    compile_deplibs="$dir/$old_library $compile_deplibs"
+	    finalize_deplibs="$dir/$old_library $finalize_deplibs"
+	  else
+	    deplibs="$lib $deplibs" # used for prog,scan pass
+	  fi
+	  continue
+	fi
+
+
+	if test "$linkmode" = prog && test "$pass" != link; then
+	  newlib_search_path="$newlib_search_path $ladir"
+	  deplibs="$lib $deplibs"
+
+	  linkalldeplibs=no
+	  if test "$link_all_deplibs" != no || test -z "$library_names" ||
+	     test "$build_libtool_libs" = no; then
+	    linkalldeplibs=yes
+	  fi
+
+	  tmp_libs=
+	  for deplib in $dependency_libs; do
+	    case $deplib in
+	    -L*) func_stripname '-L' '' "$deplib"
+	         newlib_search_path="$newlib_search_path $func_stripname_result"
+		 ;;
+	    esac
+	    # Need to link against all dependency_libs?
+	    if test "$linkalldeplibs" = yes; then
+	      deplibs="$deplib $deplibs"
+	    else
+	      # Need to hardcode shared library paths
+	      # or/and link against static libraries
+	      newdependency_libs="$deplib $newdependency_libs"
+	    fi
+	    if $opt_duplicate_deps ; then
+	      case "$tmp_libs " in
+	      *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
+	      esac
+	    fi
+	    tmp_libs="$tmp_libs $deplib"
+	  done # for deplib
+	  continue
+	fi # $linkmode = prog...
+
+	if test "$linkmode,$pass" = "prog,link"; then
+	  if test -n "$library_names" &&
+	     { { test "$prefer_static_libs" = no ||
+	         test "$prefer_static_libs,$installed" = "built,yes"; } ||
+	       test -z "$old_library"; }; then
+	    # We need to hardcode the library path
+	    if test -n "$shlibpath_var" && test -z "$avoidtemprpath" ; then
+	      # Make sure the rpath contains only unique directories.
+	      case "$temp_rpath:" in
+	      *"$absdir:"*) ;;
+	      *) temp_rpath="$temp_rpath$absdir:" ;;
+	      esac
+	    fi
+
+	    # Hardcode the library path.
+	    # Skip directories that are in the system default run-time
+	    # search path.
+	    case " $sys_lib_dlsearch_path " in
+	    *" $absdir "*) ;;
+	    *)
+	      case "$compile_rpath " in
+	      *" $absdir "*) ;;
+	      *) compile_rpath="$compile_rpath $absdir"
+	      esac
+	      ;;
+	    esac
+	    case " $sys_lib_dlsearch_path " in
+	    *" $libdir "*) ;;
+	    *)
+	      case "$finalize_rpath " in
+	      *" $libdir "*) ;;
+	      *) finalize_rpath="$finalize_rpath $libdir"
+	      esac
+	      ;;
+	    esac
+	  fi # $linkmode,$pass = prog,link...
+
+	  if test "$alldeplibs" = yes &&
+	     { test "$deplibs_check_method" = pass_all ||
+	       { test "$build_libtool_libs" = yes &&
+		 test -n "$library_names"; }; }; then
+	    # We only need to search for static libraries
+	    continue
+	  fi
+	fi
+
+	link_static=no # Whether the deplib will be linked statically
+	use_static_libs=$prefer_static_libs
+	if test "$use_static_libs" = built && test "$installed" = yes; then
+	  use_static_libs=no
+	fi
+	if test -n "$library_names" &&
+	   { test "$use_static_libs" = no || test -z "$old_library"; }; then
+	  case $host in
+	  *cygwin* | *mingw* | *cegcc*)
+	      # No point in relinking DLLs because paths are not encoded
+	      notinst_deplibs="$notinst_deplibs $lib"
+	      need_relink=no
+	    ;;
+	  *)
+	    if test "$installed" = no; then
+	      notinst_deplibs="$notinst_deplibs $lib"
+	      need_relink=yes
+	    fi
+	    ;;
+	  esac
+	  # This is a shared library
+
+	  # Warn about portability, can't link against -module's on some
+	  # systems (darwin).  Don't bleat about dlopened modules though!
+	  dlopenmodule=""
+	  for dlpremoduletest in $dlprefiles; do
+	    if test "X$dlpremoduletest" = "X$lib"; then
+	      dlopenmodule="$dlpremoduletest"
+	      break
+	    fi
+	  done
+	  if test -z "$dlopenmodule" && test "$shouldnotlink" = yes && test "$pass" = link; then
+	    $ECHO
+	    if test "$linkmode" = prog; then
+	      $ECHO "*** Warning: Linking the executable $output against the loadable module"
+	    else
+	      $ECHO "*** Warning: Linking the shared library $output against the loadable module"
+	    fi
+	    $ECHO "*** $linklib is not portable!"
+	  fi
+	  if test "$linkmode" = lib &&
+	     test "$hardcode_into_libs" = yes; then
+	    # Hardcode the library path.
+	    # Skip directories that are in the system default run-time
+	    # search path.
+	    case " $sys_lib_dlsearch_path " in
+	    *" $absdir "*) ;;
+	    *)
+	      case "$compile_rpath " in
+	      *" $absdir "*) ;;
+	      *) compile_rpath="$compile_rpath $absdir"
+	      esac
+	      ;;
+	    esac
+	    case " $sys_lib_dlsearch_path " in
+	    *" $libdir "*) ;;
+	    *)
+	      case "$finalize_rpath " in
+	      *" $libdir "*) ;;
+	      *) finalize_rpath="$finalize_rpath $libdir"
+	      esac
+	      ;;
+	    esac
+	  fi
+
+	  if test -n "$old_archive_from_expsyms_cmds"; then
+	    # figure out the soname
+	    set dummy $library_names
+	    shift
+	    realname="$1"
+	    shift
+	    libname=`eval "\\$ECHO \"$libname_spec\""`
+	    # use dlname if we got it. it's perfectly good, no?
+	    if test -n "$dlname"; then
+	      soname="$dlname"
+	    elif test -n "$soname_spec"; then
+	      # bleh windows
+	      case $host in
+	      *cygwin* | mingw* | *cegcc*)
+	        func_arith $current - $age
+		major=$func_arith_result
+		versuffix="-$major"
+		;;
+	      esac
+	      eval soname=\"$soname_spec\"
+	    else
+	      soname="$realname"
+	    fi
+
+	    # Make a new name for the extract_expsyms_cmds to use
+	    soroot="$soname"
+	    func_basename "$soroot"
+	    soname="$func_basename_result"
+	    func_stripname 'lib' '.dll' "$soname"
+	    newlib=libimp-$func_stripname_result.a
+
+	    # If the library has no export list, then create one now
+	    if test -f "$output_objdir/$soname-def"; then :
+	    else
+	      func_verbose "extracting exported symbol list from \`$soname'"
+	      func_execute_cmds "$extract_expsyms_cmds" 'exit $?'
+	    fi
+
+	    # Create $newlib
+	    if test -f "$output_objdir/$newlib"; then :; else
+	      func_verbose "generating import library for \`$soname'"
+	      func_execute_cmds "$old_archive_from_expsyms_cmds" 'exit $?'
+	    fi
+	    # make sure the library variables are pointing to the new library
+	    dir=$output_objdir
+	    linklib=$newlib
+	  fi # test -n "$old_archive_from_expsyms_cmds"
+
+	  if test "$linkmode" = prog || test "$mode" != relink; then
+	    add_shlibpath=
+	    add_dir=
+	    add=
+	    lib_linked=yes
+	    case $hardcode_action in
+	    immediate | unsupported)
+	      if test "$hardcode_direct" = no; then
+		add="$dir/$linklib"
+		case $host in
+		  *-*-sco3.2v5.0.[024]*) add_dir="-L$dir" ;;
+		  *-*-sysv4*uw2*) add_dir="-L$dir" ;;
+		  *-*-sysv5OpenUNIX* | *-*-sysv5UnixWare7.[01].[10]* | \
+		    *-*-unixware7*) add_dir="-L$dir" ;;
+		  *-*-darwin* )
+		    # if the lib is a (non-dlopened) module then we can not
+		    # link against it, someone is ignoring the earlier warnings
+		    if /usr/bin/file -L $add 2> /dev/null |
+			 $GREP ": [^:]* bundle" >/dev/null ; then
+		      if test "X$dlopenmodule" != "X$lib"; then
+			$ECHO "*** Warning: lib $linklib is a module, not a shared library"
+			if test -z "$old_library" ; then
+			  $ECHO
+			  $ECHO "*** And there doesn't seem to be a static archive available"
+			  $ECHO "*** The link will probably fail, sorry"
+			else
+			  add="$dir/$old_library"
+			fi
+		      elif test -n "$old_library"; then
+			add="$dir/$old_library"
+		      fi
+		    fi
+		esac
+	      elif test "$hardcode_minus_L" = no; then
+		case $host in
+		*-*-sunos*) add_shlibpath="$dir" ;;
+		esac
+		add_dir="-L$dir"
+		add="-l$name"
+	      elif test "$hardcode_shlibpath_var" = no; then
+		add_shlibpath="$dir"
+		add="-l$name"
+	      else
+		lib_linked=no
+	      fi
+	      ;;
+	    relink)
+	      if test "$hardcode_direct" = yes &&
+	         test "$hardcode_direct_absolute" = no; then
+		add="$dir/$linklib"
+	      elif test "$hardcode_minus_L" = yes; then
+		add_dir="-L$dir"
+		# Try looking first in the location we're being installed to.
+		if test -n "$inst_prefix_dir"; then
+		  case $libdir in
+		    [\\/]*)
+		      add_dir="$add_dir -L$inst_prefix_dir$libdir"
+		      ;;
+		  esac
+		fi
+		add="-l$name"
+	      elif test "$hardcode_shlibpath_var" = yes; then
+		add_shlibpath="$dir"
+		add="-l$name"
+	      else
+		lib_linked=no
+	      fi
+	      ;;
+	    *) lib_linked=no ;;
+	    esac
+
+	    if test "$lib_linked" != yes; then
+	      func_fatal_configuration "unsupported hardcode properties"
+	    fi
+
+	    if test -n "$add_shlibpath"; then
+	      case :$compile_shlibpath: in
+	      *":$add_shlibpath:"*) ;;
+	      *) compile_shlibpath="$compile_shlibpath$add_shlibpath:" ;;
+	      esac
+	    fi
+	    if test "$linkmode" = prog; then
+	      test -n "$add_dir" && compile_deplibs="$add_dir $compile_deplibs"
+	      test -n "$add" && compile_deplibs="$add $compile_deplibs"
+	    else
+	      test -n "$add_dir" && deplibs="$add_dir $deplibs"
+	      test -n "$add" && deplibs="$add $deplibs"
+	      if test "$hardcode_direct" != yes &&
+		 test "$hardcode_minus_L" != yes &&
+		 test "$hardcode_shlibpath_var" = yes; then
+		case :$finalize_shlibpath: in
+		*":$libdir:"*) ;;
+		*) finalize_shlibpath="$finalize_shlibpath$libdir:" ;;
+		esac
+	      fi
+	    fi
+	  fi
+
+	  if test "$linkmode" = prog || test "$mode" = relink; then
+	    add_shlibpath=
+	    add_dir=
+	    add=
+	    # Finalize command for both is simple: just hardcode it.
+	    if test "$hardcode_direct" = yes &&
+	       test "$hardcode_direct_absolute" = no; then
+	      add="$libdir/$linklib"
+	    elif test "$hardcode_minus_L" = yes; then
+	      add_dir="-L$libdir"
+	      add="-l$name"
+	    elif test "$hardcode_shlibpath_var" = yes; then
+	      case :$finalize_shlibpath: in
+	      *":$libdir:"*) ;;
+	      *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;;
+	      esac
+	      add="-l$name"
+	    elif test "$hardcode_automatic" = yes; then
+	      if test -n "$inst_prefix_dir" &&
+		 test -f "$inst_prefix_dir$libdir/$linklib" ; then
+		add="$inst_prefix_dir$libdir/$linklib"
+	      else
+		add="$libdir/$linklib"
+	      fi
+	    else
+	      # We cannot seem to hardcode it, guess we'll fake it.
+	      add_dir="-L$libdir"
+	      # Try looking first in the location we're being installed to.
+	      if test -n "$inst_prefix_dir"; then
+		case $libdir in
+		  [\\/]*)
+		    add_dir="$add_dir -L$inst_prefix_dir$libdir"
+		    ;;
+		esac
+	      fi
+	      add="-l$name"
+	    fi
+
+	    if test "$linkmode" = prog; then
+	      test -n "$add_dir" && finalize_deplibs="$add_dir $finalize_deplibs"
+	      test -n "$add" && finalize_deplibs="$add $finalize_deplibs"
+	    else
+	      test -n "$add_dir" && deplibs="$add_dir $deplibs"
+	      test -n "$add" && deplibs="$add $deplibs"
+	    fi
+	  fi
+	elif test "$linkmode" = prog; then
+	  # Here we assume that one of hardcode_direct or hardcode_minus_L
+	  # is not unsupported.  This is valid on all known static and
+	  # shared platforms.
+	  if test "$hardcode_direct" != unsupported; then
+	    test -n "$old_library" && linklib="$old_library"
+	    compile_deplibs="$dir/$linklib $compile_deplibs"
+	    finalize_deplibs="$dir/$linklib $finalize_deplibs"
+	  else
+	    compile_deplibs="-l$name -L$dir $compile_deplibs"
+	    finalize_deplibs="-l$name -L$dir $finalize_deplibs"
+	  fi
+	elif test "$build_libtool_libs" = yes; then
+	  # Not a shared library
+	  if test "$deplibs_check_method" != pass_all; then
+	    # We're trying link a shared library against a static one
+	    # but the system doesn't support it.
+
+	    # Just print a warning and add the library to dependency_libs so
+	    # that the program can be linked against the static library.
+	    $ECHO
+	    $ECHO "*** Warning: This system can not link to static lib archive $lib."
+	    $ECHO "*** I have the capability to make that library automatically link in when"
+	    $ECHO "*** you link to this library.  But I can only do this if you have a"
+	    $ECHO "*** shared version of the library, which you do not appear to have."
+	    if test "$module" = yes; then
+	      $ECHO "*** But as you try to build a module library, libtool will still create "
+	      $ECHO "*** a static module, that should work as long as the dlopening application"
+	      $ECHO "*** is linked with the -dlopen flag to resolve symbols at runtime."
+	      if test -z "$global_symbol_pipe"; then
+		$ECHO
+		$ECHO "*** However, this would only work if libtool was able to extract symbol"
+		$ECHO "*** lists from a program, using \`nm' or equivalent, but libtool could"
+		$ECHO "*** not find such a program.  So, this module is probably useless."
+		$ECHO "*** \`nm' from GNU binutils and a full rebuild may help."
+	      fi
+	      if test "$build_old_libs" = no; then
+		build_libtool_libs=module
+		build_old_libs=yes
+	      else
+		build_libtool_libs=no
+	      fi
+	    fi
+	  else
+	    deplibs="$dir/$old_library $deplibs"
+	    link_static=yes
+	  fi
+	fi # link shared/static library?
+
+	if test "$linkmode" = lib; then
+	  if test -n "$dependency_libs" &&
+	     { test "$hardcode_into_libs" != yes ||
+	       test "$build_old_libs" = yes ||
+	       test "$link_static" = yes; }; then
+	    # Extract -R from dependency_libs
+	    temp_deplibs=
+	    for libdir in $dependency_libs; do
+	      case $libdir in
+	      -R*) func_stripname '-R' '' "$libdir"
+	           temp_xrpath=$func_stripname_result
+		   case " $xrpath " in
+		   *" $temp_xrpath "*) ;;
+		   *) xrpath="$xrpath $temp_xrpath";;
+		   esac;;
+	      *) temp_deplibs="$temp_deplibs $libdir";;
+	      esac
+	    done
+	    dependency_libs="$temp_deplibs"
+	  fi
+
+	  newlib_search_path="$newlib_search_path $absdir"
+	  # Link against this library
+	  test "$link_static" = no && newdependency_libs="$abs_ladir/$laname $newdependency_libs"
+	  # ... and its dependency_libs
+	  tmp_libs=
+	  for deplib in $dependency_libs; do
+	    newdependency_libs="$deplib $newdependency_libs"
+	    if $opt_duplicate_deps ; then
+	      case "$tmp_libs " in
+	      *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
+	      esac
+	    fi
+	    tmp_libs="$tmp_libs $deplib"
+	  done
+
+	  if test "$link_all_deplibs" != no; then
+	    # Add the search paths of all dependency libraries
+	    for deplib in $dependency_libs; do
+	      path=
+	      case $deplib in
+	      -L*) path="$deplib" ;;
+	      *.la)
+	        func_dirname "$deplib" "" "."
+		dir="$func_dirname_result"
+		# We need an absolute path.
+		case $dir in
+		[\\/]* | [A-Za-z]:[\\/]*) absdir="$dir" ;;
+		*)
+		  absdir=`cd "$dir" && pwd`
+		  if test -z "$absdir"; then
+		    func_warning "cannot determine absolute directory name of \`$dir'"
+		    absdir="$dir"
+		  fi
+		  ;;
+		esac
+		if $GREP "^installed=no" $deplib > /dev/null; then
+		case $host in
+		*-*-darwin*)
+		  depdepl=
+		  eval deplibrary_names=`${SED} -n -e 's/^library_names=\(.*\)$/\1/p' $deplib`
+		  if test -n "$deplibrary_names" ; then
+		    for tmp in $deplibrary_names ; do
+		      depdepl=$tmp
+		    done
+		    if test -f "$absdir/$objdir/$depdepl" ; then
+		      depdepl="$absdir/$objdir/$depdepl"
+		      darwin_install_name=`${OTOOL} -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'`
+                      if test -z "$darwin_install_name"; then
+                          darwin_install_name=`${OTOOL64} -L $depdepl  | awk '{if (NR == 2) {print $1;exit}}'`
+                      fi
+		      compiler_flags="$compiler_flags ${wl}-dylib_file ${wl}${darwin_install_name}:${depdepl}"
+		      linker_flags="$linker_flags -dylib_file ${darwin_install_name}:${depdepl}"
+		      path=
+		    fi
+		  fi
+		  ;;
+		*)
+		  path="-L$absdir/$objdir"
+		  ;;
+		esac
+		else
+		  eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
+		  test -z "$libdir" && \
+		    func_fatal_error "\`$deplib' is not a valid libtool archive"
+		  test "$absdir" != "$libdir" && \
+		    func_warning "\`$deplib' seems to be moved"
+
+		  path="-L$absdir"
+		fi
+		;;
+	      esac
+	      case " $deplibs " in
+	      *" $path "*) ;;
+	      *) deplibs="$path $deplibs" ;;
+	      esac
+	    done
+	  fi # link_all_deplibs != no
+	fi # linkmode = lib
+      done # for deplib in $libs
+      if test "$pass" = link; then
+	if test "$linkmode" = "prog"; then
+	  compile_deplibs="$new_inherited_linker_flags $compile_deplibs"
+	  finalize_deplibs="$new_inherited_linker_flags $finalize_deplibs"
+	else
+	  compiler_flags="$compiler_flags "`$ECHO "X $new_inherited_linker_flags" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
+	fi
+      fi
+      dependency_libs="$newdependency_libs"
+      if test "$pass" = dlpreopen; then
+	# Link the dlpreopened libraries before other libraries
+	for deplib in $save_deplibs; do
+	  deplibs="$deplib $deplibs"
+	done
+      fi
+      if test "$pass" != dlopen; then
+	if test "$pass" != conv; then
+	  # Make sure lib_search_path contains only unique directories.
+	  lib_search_path=
+	  for dir in $newlib_search_path; do
+	    case "$lib_search_path " in
+	    *" $dir "*) ;;
+	    *) lib_search_path="$lib_search_path $dir" ;;
+	    esac
+	  done
+	  newlib_search_path=
+	fi
+
+	if test "$linkmode,$pass" != "prog,link"; then
+	  vars="deplibs"
+	else
+	  vars="compile_deplibs finalize_deplibs"
+	fi
+	for var in $vars dependency_libs; do
+	  # Add libraries to $var in reverse order
+	  eval tmp_libs=\"\$$var\"
+	  new_libs=
+	  for deplib in $tmp_libs; do
+	    # FIXME: Pedantically, this is the right thing to do, so
+	    #        that some nasty dependency loop isn't accidentally
+	    #        broken:
+	    #new_libs="$deplib $new_libs"
+	    # Pragmatically, this seems to cause very few problems in
+	    # practice:
+	    case $deplib in
+	    -L*) new_libs="$deplib $new_libs" ;;
+	    -R*) ;;
+	    *)
+	      # And here is the reason: when a library appears more
+	      # than once as an explicit dependence of a library, or
+	      # is implicitly linked in more than once by the
+	      # compiler, it is considered special, and multiple
+	      # occurrences thereof are not removed.  Compare this
+	      # with having the same library being listed as a
+	      # dependency of multiple other libraries: in this case,
+	      # we know (pedantically, we assume) the library does not
+	      # need to be listed more than once, so we keep only the
+	      # last copy.  This is not always right, but it is rare
+	      # enough that we require users that really mean to play
+	      # such unportable linking tricks to link the library
+	      # using -Wl,-lname, so that libtool does not consider it
+	      # for duplicate removal.
+	      case " $specialdeplibs " in
+	      *" $deplib "*) new_libs="$deplib $new_libs" ;;
+	      *)
+		case " $new_libs " in
+		*" $deplib "*) ;;
+		*) new_libs="$deplib $new_libs" ;;
+		esac
+		;;
+	      esac
+	      ;;
+	    esac
+	  done
+	  tmp_libs=
+	  for deplib in $new_libs; do
+	    case $deplib in
+	    -L*)
+	      case " $tmp_libs " in
+	      *" $deplib "*) ;;
+	      *) tmp_libs="$tmp_libs $deplib" ;;
+	      esac
+	      ;;
+	    *) tmp_libs="$tmp_libs $deplib" ;;
+	    esac
+	  done
+	  eval $var=\"$tmp_libs\"
+	done # for var
+      fi
+      # Last step: remove runtime libs from dependency_libs
+      # (they stay in deplibs)
+      tmp_libs=
+      for i in $dependency_libs ; do
+	case " $predeps $postdeps $compiler_lib_search_path " in
+	*" $i "*)
+	  i=""
+	  ;;
+	esac
+	if test -n "$i" ; then
+	  tmp_libs="$tmp_libs $i"
+	fi
+      done
+      dependency_libs=$tmp_libs
+    done # for pass
+    if test "$linkmode" = prog; then
+      dlfiles="$newdlfiles"
+    fi
+    if test "$linkmode" = prog || test "$linkmode" = lib; then
+      dlprefiles="$newdlprefiles"
+    fi
+
+    case $linkmode in
+    oldlib)
+      if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
+	func_warning "\`-dlopen' is ignored for archives"
+      fi
+
+      case " $deplibs" in
+      *\ -l* | *\ -L*)
+	func_warning "\`-l' and \`-L' are ignored for archives" ;;
+      esac
+
+      test -n "$rpath" && \
+	func_warning "\`-rpath' is ignored for archives"
+
+      test -n "$xrpath" && \
+	func_warning "\`-R' is ignored for archives"
+
+      test -n "$vinfo" && \
+	func_warning "\`-version-info/-version-number' is ignored for archives"
+
+      test -n "$release" && \
+	func_warning "\`-release' is ignored for archives"
+
+      test -n "$export_symbols$export_symbols_regex" && \
+	func_warning "\`-export-symbols' is ignored for archives"
+
+      # Now set the variables for building old libraries.
+      build_libtool_libs=no
+      oldlibs="$output"
+      objs="$objs$old_deplibs"
+      ;;
+
+    lib)
+      # Make sure we only generate libraries of the form `libNAME.la'.
+      case $outputname in
+      lib*)
+	func_stripname 'lib' '.la' "$outputname"
+	name=$func_stripname_result
+	eval shared_ext=\"$shrext_cmds\"
+	eval libname=\"$libname_spec\"
+	;;
+      *)
+	test "$module" = no && \
+	  func_fatal_help "libtool library \`$output' must begin with \`lib'"
+
+	if test "$need_lib_prefix" != no; then
+	  # Add the "lib" prefix for modules if required
+	  func_stripname '' '.la' "$outputname"
+	  name=$func_stripname_result
+	  eval shared_ext=\"$shrext_cmds\"
+	  eval libname=\"$libname_spec\"
+	else
+	  func_stripname '' '.la' "$outputname"
+	  libname=$func_stripname_result
+	fi
+	;;
+      esac
+
+      if test -n "$objs"; then
+	if test "$deplibs_check_method" != pass_all; then
+	  func_fatal_error "cannot build libtool library \`$output' from non-libtool objects on this host:$objs"
+	else
+	  $ECHO
+	  $ECHO "*** Warning: Linking the shared library $output against the non-libtool"
+	  $ECHO "*** objects $objs is not portable!"
+	  libobjs="$libobjs $objs"
+	fi
+      fi
+
+      test "$dlself" != no && \
+	func_warning "\`-dlopen self' is ignored for libtool libraries"
+
+      set dummy $rpath
+      shift
+      test "$#" -gt 1 && \
+	func_warning "ignoring multiple \`-rpath's for a libtool library"
+
+      install_libdir="$1"
+
+      oldlibs=
+      if test -z "$rpath"; then
+	if test "$build_libtool_libs" = yes; then
+	  # Building a libtool convenience library.
+	  # Some compilers have problems with a `.al' extension so
+	  # convenience libraries should have the same extension an
+	  # archive normally would.
+	  oldlibs="$output_objdir/$libname.$libext $oldlibs"
+	  build_libtool_libs=convenience
+	  build_old_libs=yes
+	fi
+
+	test -n "$vinfo" && \
+	  func_warning "\`-version-info/-version-number' is ignored for convenience libraries"
+
+	test -n "$release" && \
+	  func_warning "\`-release' is ignored for convenience libraries"
+      else
+
+	# Parse the version information argument.
+	save_ifs="$IFS"; IFS=':'
+	set dummy $vinfo 0 0 0
+	shift
+	IFS="$save_ifs"
+
+	test -n "$7" && \
+	  func_fatal_help "too many parameters to \`-version-info'"
+
+	# convert absolute version numbers to libtool ages
+	# this retains compatibility with .la files and attempts
+	# to make the code below a bit more comprehensible
+
+	case $vinfo_number in
+	yes)
+	  number_major="$1"
+	  number_minor="$2"
+	  number_revision="$3"
+	  #
+	  # There are really only two kinds -- those that
+	  # use the current revision as the major version
+	  # and those that subtract age and use age as
+	  # a minor version.  But, then there is irix
+	  # which has an extra 1 added just for fun
+	  #
+	  case $version_type in
+	  darwin|linux|osf|windows|none)
+	    func_arith $number_major + $number_minor
+	    current=$func_arith_result
+	    age="$number_minor"
+	    revision="$number_revision"
+	    ;;
+	  freebsd-aout|freebsd-elf|sunos)
+	    current="$number_major"
+	    revision="$number_minor"
+	    age="0"
+	    ;;
+	  irix|nonstopux)
+	    func_arith $number_major + $number_minor
+	    current=$func_arith_result
+	    age="$number_minor"
+	    revision="$number_minor"
+	    lt_irix_increment=no
+	    ;;
+	  *)
+	    func_fatal_configuration "$modename: unknown library version type \`$version_type'"
+	    ;;
+	  esac
+	  ;;
+	no)
+	  current="$1"
+	  revision="$2"
+	  age="$3"
+	  ;;
+	esac
+
+	# Check that each of the things are valid numbers.
+	case $current in
+	0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
+	*)
+	  func_error "CURRENT \`$current' must be a nonnegative integer"
+	  func_fatal_error "\`$vinfo' is not valid version information"
+	  ;;
+	esac
+
+	case $revision in
+	0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
+	*)
+	  func_error "REVISION \`$revision' must be a nonnegative integer"
+	  func_fatal_error "\`$vinfo' is not valid version information"
+	  ;;
+	esac
+
+	case $age in
+	0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
+	*)
+	  func_error "AGE \`$age' must be a nonnegative integer"
+	  func_fatal_error "\`$vinfo' is not valid version information"
+	  ;;
+	esac
+
+	if test "$age" -gt "$current"; then
+	  func_error "AGE \`$age' is greater than the current interface number \`$current'"
+	  func_fatal_error "\`$vinfo' is not valid version information"
+	fi
+
+	# Calculate the version variables.
+	major=
+	versuffix=
+	verstring=
+	case $version_type in
+	none) ;;
+
+	darwin)
+	  # Like Linux, but with the current version available in
+	  # verstring for coding it into the library header
+	  func_arith $current - $age
+	  major=.$func_arith_result
+	  versuffix="$major.$age.$revision"
+	  # Darwin ld doesn't like 0 for these options...
+	  func_arith $current + 1
+	  minor_current=$func_arith_result
+	  xlcverstring="${wl}-compatibility_version ${wl}$minor_current ${wl}-current_version ${wl}$minor_current.$revision"
+	  verstring="-compatibility_version $minor_current -current_version $minor_current.$revision"
+	  ;;
+
+	freebsd-aout)
+	  major=".$current"
+	  versuffix=".$current.$revision";
+	  ;;
+
+	freebsd-elf)
+	  major=".$current"
+	  versuffix=".$current"
+	  ;;
+
+	irix | nonstopux)
+	  if test "X$lt_irix_increment" = "Xno"; then
+	    func_arith $current - $age
+	  else
+	    func_arith $current - $age + 1
+	  fi
+	  major=$func_arith_result
+
+	  case $version_type in
+	    nonstopux) verstring_prefix=nonstopux ;;
+	    *)         verstring_prefix=sgi ;;
+	  esac
+	  verstring="$verstring_prefix$major.$revision"
+
+	  # Add in all the interfaces that we are compatible with.
+	  loop=$revision
+	  while test "$loop" -ne 0; do
+	    func_arith $revision - $loop
+	    iface=$func_arith_result
+	    func_arith $loop - 1
+	    loop=$func_arith_result
+	    verstring="$verstring_prefix$major.$iface:$verstring"
+	  done
+
+	  # Before this point, $major must not contain `.'.
+	  major=.$major
+	  versuffix="$major.$revision"
+	  ;;
+
+	linux)
+	  func_arith $current - $age
+	  major=.$func_arith_result
+	  versuffix="$major.$age.$revision"
+	  ;;
+
+	osf)
+	  func_arith $current - $age
+	  major=.$func_arith_result
+	  versuffix=".$current.$age.$revision"
+	  verstring="$current.$age.$revision"
+
+	  # Add in all the interfaces that we are compatible with.
+	  loop=$age
+	  while test "$loop" -ne 0; do
+	    func_arith $current - $loop
+	    iface=$func_arith_result
+	    func_arith $loop - 1
+	    loop=$func_arith_result
+	    verstring="$verstring:${iface}.0"
+	  done
+
+	  # Make executables depend on our current version.
+	  verstring="$verstring:${current}.0"
+	  ;;
+
+	qnx)
+	  major=".$current"
+	  versuffix=".$current"
+	  ;;
+
+	sunos)
+	  major=".$current"
+	  versuffix=".$current.$revision"
+	  ;;
+
+	windows)
+	  # Use '-' rather than '.', since we only want one
+	  # extension on DOS 8.3 filesystems.
+	  func_arith $current - $age
+	  major=$func_arith_result
+	  versuffix="-$major"
+	  ;;
+
+	*)
+	  func_fatal_configuration "unknown library version type \`$version_type'"
+	  ;;
+	esac
+
+	# Clear the version info if we defaulted, and they specified a release.
+	if test -z "$vinfo" && test -n "$release"; then
+	  major=
+	  case $version_type in
+	  darwin)
+	    # we can't check for "0.0" in archive_cmds due to quoting
+	    # problems, so we reset it completely
+	    verstring=
+	    ;;
+	  *)
+	    verstring="0.0"
+	    ;;
+	  esac
+	  if test "$need_version" = no; then
+	    versuffix=
+	  else
+	    versuffix=".0.0"
+	  fi
+	fi
+
+	# Remove version info from name if versioning should be avoided
+	if test "$avoid_version" = yes && test "$need_version" = no; then
+	  major=
+	  versuffix=
+	  verstring=""
+	fi
+
+	# Check to see if the archive will have undefined symbols.
+	if test "$allow_undefined" = yes; then
+	  if test "$allow_undefined_flag" = unsupported; then
+	    func_warning "undefined symbols not allowed in $host shared libraries"
+	    build_libtool_libs=no
+	    build_old_libs=yes
+	  fi
+	else
+	  # Don't allow undefined symbols.
+	  allow_undefined_flag="$no_undefined_flag"
+	fi
+
+      fi
+
+      func_generate_dlsyms "$libname" "$libname" "yes"
+      libobjs="$libobjs $symfileobj"
+      test "X$libobjs" = "X " && libobjs=
+
+      if test "$mode" != relink; then
+	# Remove our outputs, but don't remove object files since they
+	# may have been created when compiling PIC objects.
+	removelist=
+	tempremovelist=`$ECHO "$output_objdir/*"`
+	for p in $tempremovelist; do
+	  case $p in
+	    *.$objext | *.gcno)
+	       ;;
+	    $output_objdir/$outputname | $output_objdir/$libname.* | $output_objdir/${libname}${release}.*)
+	       if test "X$precious_files_regex" != "X"; then
+		 if $ECHO "$p" | $EGREP -e "$precious_files_regex" >/dev/null 2>&1
+		 then
+		   continue
+		 fi
+	       fi
+	       removelist="$removelist $p"
+	       ;;
+	    *) ;;
+	  esac
+	done
+	test -n "$removelist" && \
+	  func_show_eval "${RM}r \$removelist"
+      fi
+
+      # Now set the variables for building old libraries.
+      if test "$build_old_libs" = yes && test "$build_libtool_libs" != convenience ; then
+	oldlibs="$oldlibs $output_objdir/$libname.$libext"
+
+	# Transform .lo files to .o files.
+	oldobjs="$objs "`$ECHO "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}'$/d' -e "$lo2o" | $NL2SP`
+      fi
+
+      # Eliminate all temporary directories.
+      #for path in $notinst_path; do
+      #	lib_search_path=`$ECHO "X$lib_search_path " | $Xsed -e "s% $path % %g"`
+      #	deplibs=`$ECHO "X$deplibs " | $Xsed -e "s% -L$path % %g"`
+      #	dependency_libs=`$ECHO "X$dependency_libs " | $Xsed -e "s% -L$path % %g"`
+      #done
+
+      if test -n "$xrpath"; then
+	# If the user specified any rpath flags, then add them.
+	temp_xrpath=
+	for libdir in $xrpath; do
+	  temp_xrpath="$temp_xrpath -R$libdir"
+	  case "$finalize_rpath " in
+	  *" $libdir "*) ;;
+	  *) finalize_rpath="$finalize_rpath $libdir" ;;
+	  esac
+	done
+	if test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes; then
+	  dependency_libs="$temp_xrpath $dependency_libs"
+	fi
+      fi
+
+      # Make sure dlfiles contains only unique files that won't be dlpreopened
+      old_dlfiles="$dlfiles"
+      dlfiles=
+      for lib in $old_dlfiles; do
+	case " $dlprefiles $dlfiles " in
+	*" $lib "*) ;;
+	*) dlfiles="$dlfiles $lib" ;;
+	esac
+      done
+
+      # Make sure dlprefiles contains only unique files
+      old_dlprefiles="$dlprefiles"
+      dlprefiles=
+      for lib in $old_dlprefiles; do
+	case "$dlprefiles " in
+	*" $lib "*) ;;
+	*) dlprefiles="$dlprefiles $lib" ;;
+	esac
+      done
+
+      if test "$build_libtool_libs" = yes; then
+	if test -n "$rpath"; then
+	  case $host in
+	  *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos* | *-cegcc*)
+	    # these systems don't actually have a c library (as such)!
+	    ;;
+	  *-*-rhapsody* | *-*-darwin1.[012])
+	    # Rhapsody C library is in the System framework
+	    deplibs="$deplibs System.ltframework"
+	    ;;
+	  *-*-netbsd*)
+	    # Don't link with libc until the a.out ld.so is fixed.
+	    ;;
+	  *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
+	    # Do not include libc due to us having libc/libc_r.
+	    ;;
+	  *-*-sco3.2v5* | *-*-sco5v6*)
+	    # Causes problems with __ctype
+	    ;;
+	  *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*)
+	    # Compiler inserts libc in the correct place for threads to work
+	    ;;
+	  *)
+	    # Add libc to deplibs on all other systems if necessary.
+	    if test "$build_libtool_need_lc" = "yes"; then
+	      deplibs="$deplibs -lc"
+	    fi
+	    ;;
+	  esac
+	fi
+
+	# Transform deplibs into only deplibs that can be linked in shared.
+	name_save=$name
+	libname_save=$libname
+	release_save=$release
+	versuffix_save=$versuffix
+	major_save=$major
+	# I'm not sure if I'm treating the release correctly.  I think
+	# release should show up in the -l (ie -lgmp5) so we don't want to
+	# add it in twice.  Is that correct?
+	release=""
+	versuffix=""
+	major=""
+	newdeplibs=
+	droppeddeps=no
+	case $deplibs_check_method in
+	pass_all)
+	  # Don't check for shared/static.  Everything works.
+	  # This might be a little naive.  We might want to check
+	  # whether the library exists or not.  But this is on
+	  # osf3 & osf4 and I'm not really sure... Just
+	  # implementing what was already the behavior.
+	  newdeplibs=$deplibs
+	  ;;
+	test_compile)
+	  # This code stresses the "libraries are programs" paradigm to its
+	  # limits. Maybe even breaks it.  We compile a program, linking it
+	  # against the deplibs as a proxy for the library.  Then we can check
+	  # whether they linked in statically or dynamically with ldd.
+	  $opt_dry_run || $RM conftest.c
+	  cat > conftest.c <<EOF
+	  int main() { return 0; }
+EOF
+	  $opt_dry_run || $RM conftest
+	  if $LTCC $LTCFLAGS -o conftest conftest.c $deplibs; then
+	    ldd_output=`ldd conftest`
+	    for i in $deplibs; do
+	      case $i in
+	      -l*)
+		func_stripname -l '' "$i"
+		name=$func_stripname_result
+		if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+		  case " $predeps $postdeps " in
+		  *" $i "*)
+		    newdeplibs="$newdeplibs $i"
+		    i=""
+		    ;;
+		  esac
+		fi
+		if test -n "$i" ; then
+		  libname=`eval "\\$ECHO \"$libname_spec\""`
+		  deplib_matches=`eval "\\$ECHO \"$library_names_spec\""`
+		  set dummy $deplib_matches; shift
+		  deplib_match=$1
+		  if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
+		    newdeplibs="$newdeplibs $i"
+		  else
+		    droppeddeps=yes
+		    $ECHO
+		    $ECHO "*** Warning: dynamic linker does not accept needed library $i."
+		    $ECHO "*** I have the capability to make that library automatically link in when"
+		    $ECHO "*** you link to this library.  But I can only do this if you have a"
+		    $ECHO "*** shared version of the library, which I believe you do not have"
+		    $ECHO "*** because a test_compile did reveal that the linker did not use it for"
+		    $ECHO "*** its dynamic dependency list that programs get resolved with at runtime."
+		  fi
+		fi
+		;;
+	      *)
+		newdeplibs="$newdeplibs $i"
+		;;
+	      esac
+	    done
+	  else
+	    # Error occurred in the first compile.  Let's try to salvage
+	    # the situation: Compile a separate program for each library.
+	    for i in $deplibs; do
+	      case $i in
+	      -l*)
+		func_stripname -l '' "$i"
+		name=$func_stripname_result
+		$opt_dry_run || $RM conftest
+		if $LTCC $LTCFLAGS -o conftest conftest.c $i; then
+		  ldd_output=`ldd conftest`
+		  if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+		    case " $predeps $postdeps " in
+		    *" $i "*)
+		      newdeplibs="$newdeplibs $i"
+		      i=""
+		      ;;
+		    esac
+		  fi
+		  if test -n "$i" ; then
+		    libname=`eval "\\$ECHO \"$libname_spec\""`
+		    deplib_matches=`eval "\\$ECHO \"$library_names_spec\""`
+		    set dummy $deplib_matches; shift
+		    deplib_match=$1
+		    if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
+		      newdeplibs="$newdeplibs $i"
+		    else
+		      droppeddeps=yes
+		      $ECHO
+		      $ECHO "*** Warning: dynamic linker does not accept needed library $i."
+		      $ECHO "*** I have the capability to make that library automatically link in when"
+		      $ECHO "*** you link to this library.  But I can only do this if you have a"
+		      $ECHO "*** shared version of the library, which you do not appear to have"
+		      $ECHO "*** because a test_compile did reveal that the linker did not use this one"
+		      $ECHO "*** as a dynamic dependency that programs can get resolved with at runtime."
+		    fi
+		  fi
+		else
+		  droppeddeps=yes
+		  $ECHO
+		  $ECHO "*** Warning!  Library $i is needed by this library but I was not able to"
+		  $ECHO "*** make it link in!  You will probably need to install it or some"
+		  $ECHO "*** library that it depends on before this library will be fully"
+		  $ECHO "*** functional.  Installing it before continuing would be even better."
+		fi
+		;;
+	      *)
+		newdeplibs="$newdeplibs $i"
+		;;
+	      esac
+	    done
+	  fi
+	  ;;
+	file_magic*)
+	  set dummy $deplibs_check_method; shift
+	  file_magic_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"`
+	  for a_deplib in $deplibs; do
+	    case $a_deplib in
+	    -l*)
+	      func_stripname -l '' "$a_deplib"
+	      name=$func_stripname_result
+	      if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+		case " $predeps $postdeps " in
+		*" $a_deplib "*)
+		  newdeplibs="$newdeplibs $a_deplib"
+		  a_deplib=""
+		  ;;
+		esac
+	      fi
+	      if test -n "$a_deplib" ; then
+		libname=`eval "\\$ECHO \"$libname_spec\""`
+		for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
+		  potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
+		  for potent_lib in $potential_libs; do
+		      # Follow soft links.
+		      if ls -lLd "$potent_lib" 2>/dev/null |
+			 $GREP " -> " >/dev/null; then
+			continue
+		      fi
+		      # The statement above tries to avoid entering an
+		      # endless loop below, in case of cyclic links.
+		      # We might still enter an endless loop, since a link
+		      # loop can be closed while we follow links,
+		      # but so what?
+		      potlib="$potent_lib"
+		      while test -h "$potlib" 2>/dev/null; do
+			potliblink=`ls -ld $potlib | ${SED} 's/.* -> //'`
+			case $potliblink in
+			[\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";;
+			*) potlib=`$ECHO "X$potlib" | $Xsed -e 's,[^/]*$,,'`"$potliblink";;
+			esac
+		      done
+		      if eval $file_magic_cmd \"\$potlib\" 2>/dev/null |
+			 $SED -e 10q |
+			 $EGREP "$file_magic_regex" > /dev/null; then
+			newdeplibs="$newdeplibs $a_deplib"
+			a_deplib=""
+			break 2
+		      fi
+		  done
+		done
+	      fi
+	      if test -n "$a_deplib" ; then
+		droppeddeps=yes
+		$ECHO
+		$ECHO "*** Warning: linker path does not have real file for library $a_deplib."
+		$ECHO "*** I have the capability to make that library automatically link in when"
+		$ECHO "*** you link to this library.  But I can only do this if you have a"
+		$ECHO "*** shared version of the library, which you do not appear to have"
+		$ECHO "*** because I did check the linker path looking for a file starting"
+		if test -z "$potlib" ; then
+		  $ECHO "*** with $libname but no candidates were found. (...for file magic test)"
+		else
+		  $ECHO "*** with $libname and none of the candidates passed a file format test"
+		  $ECHO "*** using a file magic. Last file checked: $potlib"
+		fi
+	      fi
+	      ;;
+	    *)
+	      # Add a -L argument.
+	      newdeplibs="$newdeplibs $a_deplib"
+	      ;;
+	    esac
+	  done # Gone through all deplibs.
+	  ;;
+	match_pattern*)
+	  set dummy $deplibs_check_method; shift
+	  match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"`
+	  for a_deplib in $deplibs; do
+	    case $a_deplib in
+	    -l*)
+	      func_stripname -l '' "$a_deplib"
+	      name=$func_stripname_result
+	      if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+		case " $predeps $postdeps " in
+		*" $a_deplib "*)
+		  newdeplibs="$newdeplibs $a_deplib"
+		  a_deplib=""
+		  ;;
+		esac
+	      fi
+	      if test -n "$a_deplib" ; then
+		libname=`eval "\\$ECHO \"$libname_spec\""`
+		for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
+		  potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
+		  for potent_lib in $potential_libs; do
+		    potlib="$potent_lib" # see symlink-check above in file_magic test
+		    if eval "\$ECHO \"X$potent_lib\"" 2>/dev/null | $Xsed -e 10q | \
+		       $EGREP "$match_pattern_regex" > /dev/null; then
+		      newdeplibs="$newdeplibs $a_deplib"
+		      a_deplib=""
+		      break 2
+		    fi
+		  done
+		done
+	      fi
+	      if test -n "$a_deplib" ; then
+		droppeddeps=yes
+		$ECHO
+		$ECHO "*** Warning: linker path does not have real file for library $a_deplib."
+		$ECHO "*** I have the capability to make that library automatically link in when"
+		$ECHO "*** you link to this library.  But I can only do this if you have a"
+		$ECHO "*** shared version of the library, which you do not appear to have"
+		$ECHO "*** because I did check the linker path looking for a file starting"
+		if test -z "$potlib" ; then
+		  $ECHO "*** with $libname but no candidates were found. (...for regex pattern test)"
+		else
+		  $ECHO "*** with $libname and none of the candidates passed a file format test"
+		  $ECHO "*** using a regex pattern. Last file checked: $potlib"
+		fi
+	      fi
+	      ;;
+	    *)
+	      # Add a -L argument.
+	      newdeplibs="$newdeplibs $a_deplib"
+	      ;;
+	    esac
+	  done # Gone through all deplibs.
+	  ;;
+	none | unknown | *)
+	  newdeplibs=""
+	  tmp_deplibs=`$ECHO "X $deplibs" | $Xsed \
+	      -e 's/ -lc$//' -e 's/ -[LR][^ ]*//g'`
+	  if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+	    for i in $predeps $postdeps ; do
+	      # can't use Xsed below, because $i might contain '/'
+	      tmp_deplibs=`$ECHO "X $tmp_deplibs" | $Xsed -e "s,$i,,"`
+	    done
+	  fi
+	  if $ECHO "X $tmp_deplibs" | $Xsed -e 's/[	 ]//g' |
+	     $GREP . >/dev/null; then
+	    $ECHO
+	    if test "X$deplibs_check_method" = "Xnone"; then
+	      $ECHO "*** Warning: inter-library dependencies are not supported in this platform."
+	    else
+	      $ECHO "*** Warning: inter-library dependencies are not known to be supported."
+	    fi
+	    $ECHO "*** All declared inter-library dependencies are being dropped."
+	    droppeddeps=yes
+	  fi
+	  ;;
+	esac
+	versuffix=$versuffix_save
+	major=$major_save
+	release=$release_save
+	libname=$libname_save
+	name=$name_save
+
+	case $host in
+	*-*-rhapsody* | *-*-darwin1.[012])
+	  # On Rhapsody replace the C library with the System framework
+	  newdeplibs=`$ECHO "X $newdeplibs" | $Xsed -e 's/ -lc / System.ltframework /'`
+	  ;;
+	esac
+
+	if test "$droppeddeps" = yes; then
+	  if test "$module" = yes; then
+	    $ECHO
+	    $ECHO "*** Warning: libtool could not satisfy all declared inter-library"
+	    $ECHO "*** dependencies of module $libname.  Therefore, libtool will create"
+	    $ECHO "*** a static module, that should work as long as the dlopening"
+	    $ECHO "*** application is linked with the -dlopen flag."
+	    if test -z "$global_symbol_pipe"; then
+	      $ECHO
+	      $ECHO "*** However, this would only work if libtool was able to extract symbol"
+	      $ECHO "*** lists from a program, using \`nm' or equivalent, but libtool could"
+	      $ECHO "*** not find such a program.  So, this module is probably useless."
+	      $ECHO "*** \`nm' from GNU binutils and a full rebuild may help."
+	    fi
+	    if test "$build_old_libs" = no; then
+	      oldlibs="$output_objdir/$libname.$libext"
+	      build_libtool_libs=module
+	      build_old_libs=yes
+	    else
+	      build_libtool_libs=no
+	    fi
+	  else
+	    $ECHO "*** The inter-library dependencies that have been dropped here will be"
+	    $ECHO "*** automatically added whenever a program is linked with this library"
+	    $ECHO "*** or is declared to -dlopen it."
+
+	    if test "$allow_undefined" = no; then
+	      $ECHO
+	      $ECHO "*** Since this library must not contain undefined symbols,"
+	      $ECHO "*** because either the platform does not support them or"
+	      $ECHO "*** it was explicitly requested with -no-undefined,"
+	      $ECHO "*** libtool will only create a static version of it."
+	      if test "$build_old_libs" = no; then
+		oldlibs="$output_objdir/$libname.$libext"
+		build_libtool_libs=module
+		build_old_libs=yes
+	      else
+		build_libtool_libs=no
+	      fi
+	    fi
+	  fi
+	fi
+	# Done checking deplibs!
+	deplibs=$newdeplibs
+      fi
+      # Time to change all our "foo.ltframework" stuff back to "-framework foo"
+      case $host in
+	*-*-darwin*)
+	  newdeplibs=`$ECHO "X $newdeplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
+	  new_inherited_linker_flags=`$ECHO "X $new_inherited_linker_flags" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
+	  deplibs=`$ECHO "X $deplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
+	  ;;
+      esac
+
+      # move library search paths that coincide with paths to not yet
+      # installed libraries to the beginning of the library search list
+      new_libs=
+      for path in $notinst_path; do
+	case " $new_libs " in
+	*" -L$path/$objdir "*) ;;
+	*)
+	  case " $deplibs " in
+	  *" -L$path/$objdir "*)
+	    new_libs="$new_libs -L$path/$objdir" ;;
+	  esac
+	  ;;
+	esac
+      done
+      for deplib in $deplibs; do
+	case $deplib in
+	-L*)
+	  case " $new_libs " in
+	  *" $deplib "*) ;;
+	  *) new_libs="$new_libs $deplib" ;;
+	  esac
+	  ;;
+	*) new_libs="$new_libs $deplib" ;;
+	esac
+      done
+      deplibs="$new_libs"
+
+      # All the library-specific variables (install_libdir is set above).
+      library_names=
+      old_library=
+      dlname=
+
+      # Test again, we may have decided not to build it any more
+      if test "$build_libtool_libs" = yes; then
+	if test "$hardcode_into_libs" = yes; then
+	  # Hardcode the library paths
+	  hardcode_libdirs=
+	  dep_rpath=
+	  rpath="$finalize_rpath"
+	  test "$mode" != relink && rpath="$compile_rpath$rpath"
+	  for libdir in $rpath; do
+	    if test -n "$hardcode_libdir_flag_spec"; then
+	      if test -n "$hardcode_libdir_separator"; then
+		if test -z "$hardcode_libdirs"; then
+		  hardcode_libdirs="$libdir"
+		else
+		  # Just accumulate the unique libdirs.
+		  case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
+		  *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
+		    ;;
+		  *)
+		    hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
+		    ;;
+		  esac
+		fi
+	      else
+		eval flag=\"$hardcode_libdir_flag_spec\"
+		dep_rpath="$dep_rpath $flag"
+	      fi
+	    elif test -n "$runpath_var"; then
+	      case "$perm_rpath " in
+	      *" $libdir "*) ;;
+	      *) perm_rpath="$perm_rpath $libdir" ;;
+	      esac
+	    fi
+	  done
+	  # Substitute the hardcoded libdirs into the rpath.
+	  if test -n "$hardcode_libdir_separator" &&
+	     test -n "$hardcode_libdirs"; then
+	    libdir="$hardcode_libdirs"
+	    if test -n "$hardcode_libdir_flag_spec_ld"; then
+	      eval dep_rpath=\"$hardcode_libdir_flag_spec_ld\"
+	    else
+	      eval dep_rpath=\"$hardcode_libdir_flag_spec\"
+	    fi
+	  fi
+	  if test -n "$runpath_var" && test -n "$perm_rpath"; then
+	    # We should set the runpath_var.
+	    rpath=
+	    for dir in $perm_rpath; do
+	      rpath="$rpath$dir:"
+	    done
+	    eval "$runpath_var='$rpath\$$runpath_var'; export $runpath_var"
+	  fi
+	  test -n "$dep_rpath" && deplibs="$dep_rpath $deplibs"
+	fi
 
-	if test "$fast_install" = yes; then
-	  $echo >> $output "\
-  program=lt-'$outputname'$exeext
-  progdir=\"\$thisdir/$objdir\"
+	shlibpath="$finalize_shlibpath"
+	test "$mode" != relink && shlibpath="$compile_shlibpath$shlibpath"
+	if test -n "$shlibpath"; then
+	  eval "$shlibpath_var='$shlibpath\$$shlibpath_var'; export $shlibpath_var"
+	fi
 
-  if test ! -f \"\$progdir/\$program\" || \\
-     { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | ${SED} 1q\`; \\
-       test \"X\$file\" != \"X\$progdir/\$program\"; }; then
+	# Get the real and link names of the library.
+	eval shared_ext=\"$shrext_cmds\"
+	eval library_names=\"$library_names_spec\"
+	set dummy $library_names
+	shift
+	realname="$1"
+	shift
 
-    file=\"\$\$-\$program\"
+	if test -n "$soname_spec"; then
+	  eval soname=\"$soname_spec\"
+	else
+	  soname="$realname"
+	fi
+	if test -z "$dlname"; then
+	  dlname=$soname
+	fi
 
-    if test ! -d \"\$progdir\"; then
-      $mkdir \"\$progdir\"
-    else
-      $rm \"\$progdir/\$file\"
-    fi"
+	lib="$output_objdir/$realname"
+	linknames=
+	for link
+	do
+	  linknames="$linknames $link"
+	done
 
-	  $echo >> $output "\
+	# Use standard objects if they are pic
+	test -z "$pic_flag" && libobjs=`$ECHO "X$libobjs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
+	test "X$libobjs" = "X " && libobjs=
 
-    # relink executable if necessary
-    if test -n \"\$relink_command\"; then
-      if relink_command_output=\`eval \$relink_command 2>&1\`; then :
-      else
-	$echo \"\$relink_command_output\" >&2
-	$rm \"\$progdir/\$file\"
-	exit $EXIT_FAILURE
-      fi
-    fi
+	delfiles=
+	if test -n "$export_symbols" && test -n "$include_expsyms"; then
+	  $opt_dry_run || cp "$export_symbols" "$output_objdir/$libname.uexp"
+	  export_symbols="$output_objdir/$libname.uexp"
+	  delfiles="$delfiles $export_symbols"
+	fi
+
+	orig_export_symbols=
+	case $host_os in
+	cygwin* | mingw* | cegcc*)
+	  if test -n "$export_symbols" && test -z "$export_symbols_regex"; then
+	    # exporting using user supplied symfile
+	    if test "x`$SED 1q $export_symbols`" != xEXPORTS; then
+	      # and it's NOT already a .def file. Must figure out
+	      # which of the given symbols are data symbols and tag
+	      # them as such. So, trigger use of export_symbols_cmds.
+	      # export_symbols gets reassigned inside the "prepare
+	      # the list of exported symbols" if statement, so the
+	      # include_expsyms logic still works.
+	      orig_export_symbols="$export_symbols"
+	      export_symbols=
+	      always_export_symbols=yes
+	    fi
+	  fi
+	  ;;
+	esac
 
-    $mv \"\$progdir/\$file\" \"\$progdir/\$program\" 2>/dev/null ||
-    { $rm \"\$progdir/\$program\";
-      $mv \"\$progdir/\$file\" \"\$progdir/\$program\"; }
-    $rm \"\$progdir/\$file\"
-  fi"
-	else
-	  $echo >> $output "\
-  program='$outputname'
-  progdir=\"\$thisdir/$objdir\"
-"
+	# Prepare the list of exported symbols
+	if test -z "$export_symbols"; then
+	  if test "$always_export_symbols" = yes || test -n "$export_symbols_regex"; then
+	    func_verbose "generating symbol list for \`$libname.la'"
+	    export_symbols="$output_objdir/$libname.exp"
+	    $opt_dry_run || $RM $export_symbols
+	    cmds=$export_symbols_cmds
+	    save_ifs="$IFS"; IFS='~'
+	    for cmd in $cmds; do
+	      IFS="$save_ifs"
+	      eval cmd=\"$cmd\"
+	      func_len " $cmd"
+	      len=$func_len_result
+	      if test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then
+		func_show_eval "$cmd" 'exit $?'
+		skipped_export=false
+	      else
+		# The command line is too long to execute in one step.
+		func_verbose "using reloadable object file for export list..."
+		skipped_export=:
+		# Break out early, otherwise skipped_export may be
+		# set to false by a later but shorter cmd.
+		break
+	      fi
+	    done
+	    IFS="$save_ifs"
+	    if test -n "$export_symbols_regex" && test "X$skipped_export" != "X:"; then
+	      func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"'
+	      func_show_eval '$MV "${export_symbols}T" "$export_symbols"'
+	    fi
+	  fi
 	fi
 
-	$echo >> $output "\
-
-  if test -f \"\$progdir/\$program\"; then"
+	if test -n "$export_symbols" && test -n "$include_expsyms"; then
+	  tmp_export_symbols="$export_symbols"
+	  test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols"
+	  $opt_dry_run || eval '$ECHO "X$include_expsyms" | $Xsed | $SP2NL >> "$tmp_export_symbols"'
+	fi
+
+	if test "X$skipped_export" != "X:" && test -n "$orig_export_symbols"; then
+	  # The given exports_symbols file has to be filtered, so filter it.
+	  func_verbose "filter symbol list for \`$libname.la' to tag DATA exports"
+	  # FIXME: $output_objdir/$libname.filter potentially contains lots of
+	  # 's' commands which not all seds can handle. GNU sed should be fine
+	  # though. Also, the filter scales superlinearly with the number of
+	  # global variables. join(1) would be nice here, but unfortunately
+	  # isn't a blessed tool.
+	  $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter
+	  delfiles="$delfiles $export_symbols $output_objdir/$libname.filter"
+	  export_symbols=$output_objdir/$libname.def
+	  $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols
+	fi
 
-	# Export our shlibpath_var if we have one.
-	if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
-	  $echo >> $output "\
-    # Add our own library path to $shlibpath_var
-    $shlibpath_var=\"$temp_rpath\$$shlibpath_var\"
+	tmp_deplibs=
+	for test_deplib in $deplibs; do
+	  case " $convenience " in
+	  *" $test_deplib "*) ;;
+	  *)
+	    tmp_deplibs="$tmp_deplibs $test_deplib"
+	    ;;
+	  esac
+	done
+	deplibs="$tmp_deplibs"
 
-    # Some systems cannot cope with colon-terminated $shlibpath_var
-    # The second colon is a workaround for a bug in BeOS R4 sed
-    $shlibpath_var=\`\$echo \"X\$$shlibpath_var\" | \$Xsed -e 's/::*\$//'\`
+	if test -n "$convenience"; then
+	  if test -n "$whole_archive_flag_spec" &&
+	    test "$compiler_needs_object" = yes &&
+	    test -z "$libobjs"; then
+	    # extract the archives, so we have objects to list.
+	    # TODO: could optimize this to just extract one archive.
+	    whole_archive_flag_spec=
+	  fi
+	  if test -n "$whole_archive_flag_spec"; then
+	    save_libobjs=$libobjs
+	    eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
+	    test "X$libobjs" = "X " && libobjs=
+	  else
+	    gentop="$output_objdir/${outputname}x"
+	    generated="$generated $gentop"
 
-    export $shlibpath_var
-"
+	    func_extract_archives $gentop $convenience
+	    libobjs="$libobjs $func_extract_archives_result"
+	    test "X$libobjs" = "X " && libobjs=
+	  fi
 	fi
 
-	# fixup the dll searchpath if we need to.
-	if test -n "$dllsearchpath"; then
-	  $echo >> $output "\
-    # Add the dll search path components to the executable PATH
-    PATH=$dllsearchpath:\$PATH
-"
+	if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then
+	  eval flag=\"$thread_safe_flag_spec\"
+	  linker_flags="$linker_flags $flag"
 	fi
 
-	$echo >> $output "\
-    if test \"\$libtool_execute_magic\" != \"$magic\"; then
-      # Run the actual program with our arguments.
-"
-	case $host in
-	# Backslashes separate directories on plain windows
-	*-*-mingw | *-*-os2*)
-	  $echo >> $output "\
-      exec \"\$progdir\\\\\$program\" \${1+\"\$@\"}
-"
-	  ;;
-
-	*)
-	  $echo >> $output "\
-      exec \"\$progdir/\$program\" \${1+\"\$@\"}
-"
-	  ;;
-	esac
-	$echo >> $output "\
-      \$echo \"\$0: cannot exec \$program \$*\"
-      exit $EXIT_FAILURE
-    fi
-  else
-    # The program doesn't exist.
-    \$echo \"\$0: error: \\\`\$progdir/\$program' does not exist\" 1>&2
-    \$echo \"This script is just a wrapper for \$program.\" 1>&2
-    $echo \"See the $PACKAGE documentation for more information.\" 1>&2
-    exit $EXIT_FAILURE
-  fi
-fi\
-"
-	chmod +x $output
-      fi
-      exit $EXIT_SUCCESS
-      ;;
-    esac
-
-    # See if we need to build an old-fashioned archive.
-    for oldlib in $oldlibs; do
+	# Make a backup of the uninstalled library when relinking
+	if test "$mode" = relink; then
+	  $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}U && $MV $realname ${realname}U)' || exit $?
+	fi
 
-      if test "$build_libtool_libs" = convenience; then
-	oldobjs="$libobjs_save"
-	addlibs="$convenience"
-	build_libtool_libs=no
-      else
-	if test "$build_libtool_libs" = module; then
-	  oldobjs="$libobjs_save"
-	  build_libtool_libs=no
+	# Do each of the archive commands.
+	if test "$module" = yes && test -n "$module_cmds" ; then
+	  if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then
+	    eval test_cmds=\"$module_expsym_cmds\"
+	    cmds=$module_expsym_cmds
+	  else
+	    eval test_cmds=\"$module_cmds\"
+	    cmds=$module_cmds
+	  fi
 	else
-	  oldobjs="$old_deplibs $non_pic_objects"
+	  if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
+	    eval test_cmds=\"$archive_expsym_cmds\"
+	    cmds=$archive_expsym_cmds
+	  else
+	    eval test_cmds=\"$archive_cmds\"
+	    cmds=$archive_cmds
+	  fi
 	fi
-	addlibs="$old_convenience"
-      fi
 
-      if test -n "$addlibs"; then
-	gentop="$output_objdir/${outputname}x"
-	generated="$generated $gentop"
+	if test "X$skipped_export" != "X:" &&
+	   func_len " $test_cmds" &&
+	   len=$func_len_result &&
+	   test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then
+	  :
+	else
+	  # The command line is too long to link in one step, link piecewise
+	  # or, if using GNU ld and skipped_export is not :, use a linker
+	  # script.
 
-	func_extract_archives $gentop $addlibs
-	oldobjs="$oldobjs $func_extract_archives_result"
-      fi
+	  # Save the value of $output and $libobjs because we want to
+	  # use them later.  If we have whole_archive_flag_spec, we
+	  # want to use save_libobjs as it was before
+	  # whole_archive_flag_spec was expanded, because we can't
+	  # assume the linker understands whole_archive_flag_spec.
+	  # This may have to be revisited, in case too many
+	  # convenience libraries get linked in and end up exceeding
+	  # the spec.
+	  if test -z "$convenience" || test -z "$whole_archive_flag_spec"; then
+	    save_libobjs=$libobjs
+	  fi
+	  save_output=$output
+	  output_la=`$ECHO "X$output" | $Xsed -e "$basename"`
 
-      # Do each command in the archive commands.
-      if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then
-       cmds=$old_archive_from_new_cmds
-      else
-	# POSIX demands no paths to be encoded in archives.  We have
-	# to avoid creating archives with duplicate basenames if we
-	# might have to extract them afterwards, e.g., when creating a
-	# static archive out of a convenience library, or when linking
-	# the entirety of a libtool archive into another (currently
-	# not supported by libtool).
-	if (for obj in $oldobjs
+	  # Clear the reloadable object creation command queue and
+	  # initialize k to one.
+	  test_cmds=
+	  concat_cmds=
+	  objlist=
+	  last_robj=
+	  k=1
+
+	  if test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "$with_gnu_ld" = yes; then
+	    output=${output_objdir}/${output_la}.lnkscript
+	    func_verbose "creating GNU ld script: $output"
+	    $ECHO 'INPUT (' > $output
+	    for obj in $save_libobjs
 	    do
-	      $echo "X$obj" | $Xsed -e 's%^.*/%%'
-	    done | sort | sort -uc >/dev/null 2>&1); then
-	  :
-	else
-	  $echo "copying selected object files to avoid basename conflicts..."
+	      $ECHO "$obj" >> $output
+	    done
+	    $ECHO ')' >> $output
+	    delfiles="$delfiles $output"
+	  elif test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "X$file_list_spec" != X; then
+	    output=${output_objdir}/${output_la}.lnk
+	    func_verbose "creating linker input file list: $output"
+	    : > $output
+	    set x $save_libobjs
+	    shift
+	    firstobj=
+	    if test "$compiler_needs_object" = yes; then
+	      firstobj="$1 "
+	      shift
+	    fi
+	    for obj
+	    do
+	      $ECHO "$obj" >> $output
+	    done
+	    delfiles="$delfiles $output"
+	    output=$firstobj\"$file_list_spec$output\"
+	  else
+	    if test -n "$save_libobjs"; then
+	      func_verbose "creating reloadable object files..."
+	      output=$output_objdir/$output_la-${k}.$objext
+	      eval test_cmds=\"$reload_cmds\"
+	      func_len " $test_cmds"
+	      len0=$func_len_result
+	      len=$len0
+
+	      # Loop over the list of objects to be linked.
+	      for obj in $save_libobjs
+	      do
+		func_len " $obj"
+		func_arith $len + $func_len_result
+		len=$func_arith_result
+		if test "X$objlist" = X ||
+		   test "$len" -lt "$max_cmd_len"; then
+		  func_append objlist " $obj"
+		else
+		  # The command $test_cmds is almost too long, add a
+		  # command to the queue.
+		  if test "$k" -eq 1 ; then
+		    # The first file doesn't have a previous command to add.
+		    eval concat_cmds=\"$reload_cmds $objlist $last_robj\"
+		  else
+		    # All subsequent reloadable object files will link in
+		    # the last one created.
+		    eval concat_cmds=\"\$concat_cmds~$reload_cmds $objlist $last_robj~\$RM $last_robj\"
+		  fi
+		  last_robj=$output_objdir/$output_la-${k}.$objext
+		  func_arith $k + 1
+		  k=$func_arith_result
+		  output=$output_objdir/$output_la-${k}.$objext
+		  objlist=$obj
+		  func_len " $last_robj"
+		  func_arith $len0 + $func_len_result
+		  len=$func_arith_result
+		fi
+	      done
+	      # Handle the remaining objects by creating one last
+	      # reloadable object file.  All subsequent reloadable object
+	      # files will link in the last one created.
+	      test -z "$concat_cmds" || concat_cmds=$concat_cmds~
+	      eval concat_cmds=\"\${concat_cmds}$reload_cmds $objlist $last_robj\"
+	      if test -n "$last_robj"; then
+	        eval concat_cmds=\"\${concat_cmds}~\$RM $last_robj\"
+	      fi
+	      delfiles="$delfiles $output"
 
-	  if test -z "$gentop"; then
-	    gentop="$output_objdir/${outputname}x"
-	    generated="$generated $gentop"
+	    else
+	      output=
+	    fi
+
+	    if ${skipped_export-false}; then
+	      func_verbose "generating symbol list for \`$libname.la'"
+	      export_symbols="$output_objdir/$libname.exp"
+	      $opt_dry_run || $RM $export_symbols
+	      libobjs=$output
+	      # Append the command to create the export file.
+	      test -z "$concat_cmds" || concat_cmds=$concat_cmds~
+	      eval concat_cmds=\"\$concat_cmds$export_symbols_cmds\"
+	      if test -n "$last_robj"; then
+		eval concat_cmds=\"\$concat_cmds~\$RM $last_robj\"
+	      fi
+	    fi
+
+	    test -n "$save_libobjs" &&
+	      func_verbose "creating a temporary reloadable object file: $output"
+
+	    # Loop through the commands generated above and execute them.
+	    save_ifs="$IFS"; IFS='~'
+	    for cmd in $concat_cmds; do
+	      IFS="$save_ifs"
+	      $opt_silent || {
+		  func_quote_for_expand "$cmd"
+		  eval "func_echo $func_quote_for_expand_result"
+	      }
+	      $opt_dry_run || eval "$cmd" || {
+		lt_exit=$?
+
+		# Restore the uninstalled library and exit
+		if test "$mode" = relink; then
+		  ( cd "$output_objdir" && \
+		    $RM "${realname}T" && \
+		    $MV "${realname}U" "$realname" )
+		fi
+
+		exit $lt_exit
+	      }
+	    done
+	    IFS="$save_ifs"
 
-	    $show "${rm}r $gentop"
-	    $run ${rm}r "$gentop"
-	    $show "$mkdir $gentop"
-	    $run $mkdir "$gentop"
-	    exit_status=$?
-	    if test "$exit_status" -ne 0 && test ! -d "$gentop"; then
-	      exit $exit_status
+	    if test -n "$export_symbols_regex" && ${skipped_export-false}; then
+	      func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"'
+	      func_show_eval '$MV "${export_symbols}T" "$export_symbols"'
 	    fi
 	  fi
 
-	  save_oldobjs=$oldobjs
-	  oldobjs=
-	  counter=1
-	  for obj in $save_oldobjs
-	  do
-	    objbase=`$echo "X$obj" | $Xsed -e 's%^.*/%%'`
-	    case " $oldobjs " in
-	    " ") oldobjs=$obj ;;
-	    *[\ /]"$objbase "*)
-	      while :; do
-		# Make sure we don't pick an alternate name that also
-		# overlaps.
-		newobj=lt$counter-$objbase
-		counter=`expr $counter + 1`
-		case " $oldobjs " in
-		*[\ /]"$newobj "*) ;;
-		*) if test ! -f "$gentop/$newobj"; then break; fi ;;
-		esac
-	      done
-	      $show "ln $obj $gentop/$newobj || cp $obj $gentop/$newobj"
-	      $run ln "$obj" "$gentop/$newobj" ||
-	      $run cp "$obj" "$gentop/$newobj"
-	      oldobjs="$oldobjs $gentop/$newobj"
-	      ;;
-	    *) oldobjs="$oldobjs $obj" ;;
-	    esac
-	  done
-	fi
+          if ${skipped_export-false}; then
+	    if test -n "$export_symbols" && test -n "$include_expsyms"; then
+	      tmp_export_symbols="$export_symbols"
+	      test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols"
+	      $opt_dry_run || eval '$ECHO "X$include_expsyms" | $Xsed | $SP2NL >> "$tmp_export_symbols"'
+	    fi
+
+	    if test -n "$orig_export_symbols"; then
+	      # The given exports_symbols file has to be filtered, so filter it.
+	      func_verbose "filter symbol list for \`$libname.la' to tag DATA exports"
+	      # FIXME: $output_objdir/$libname.filter potentially contains lots of
+	      # 's' commands which not all seds can handle. GNU sed should be fine
+	      # though. Also, the filter scales superlinearly with the number of
+	      # global variables. join(1) would be nice here, but unfortunately
+	      # isn't a blessed tool.
+	      $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter
+	      delfiles="$delfiles $export_symbols $output_objdir/$libname.filter"
+	      export_symbols=$output_objdir/$libname.def
+	      $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols
+	    fi
+	  fi
 
-	eval cmds=\"$old_archive_cmds\"
+	  libobjs=$output
+	  # Restore the value of output.
+	  output=$save_output
 
-	if len=`expr "X$cmds" : ".*"` &&
-	     test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then
-	  cmds=$old_archive_cmds
-	else
-	  # the command line is too long to link in one step, link in parts
-	  $echo "using piecewise archive linking..."
-	  save_RANLIB=$RANLIB
-	  RANLIB=:
-	  objlist=
-	  concat_cmds=
-	  save_oldobjs=$oldobjs
+	  if test -n "$convenience" && test -n "$whole_archive_flag_spec"; then
+	    eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
+	    test "X$libobjs" = "X " && libobjs=
+	  fi
+	  # Expand the library linking commands again to reset the
+	  # value of $libobjs for piecewise linking.
 
-	  # Is there a better way of finding the last object in the list?
-	  for obj in $save_oldobjs
-	  do
-	    last_oldobj=$obj
-	  done
-	  for obj in $save_oldobjs
-	  do
-	    oldobjs="$objlist $obj"
-	    objlist="$objlist $obj"
-	    eval test_cmds=\"$old_archive_cmds\"
-	    if len=`expr "X$test_cmds" : ".*" 2>/dev/null` &&
-	       test "$len" -le "$max_cmd_len"; then
-	      :
+	  # Do each of the archive commands.
+	  if test "$module" = yes && test -n "$module_cmds" ; then
+	    if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then
+	      cmds=$module_expsym_cmds
 	    else
-	      # the above command should be used before it gets too long
-	      oldobjs=$objlist
-	      if test "$obj" = "$last_oldobj" ; then
-	        RANLIB=$save_RANLIB
-	      fi
-	      test -z "$concat_cmds" || concat_cmds=$concat_cmds~
-	      eval concat_cmds=\"\${concat_cmds}$old_archive_cmds\"
-	      objlist=
+	      cmds=$module_cmds
 	    fi
-	  done
-	  RANLIB=$save_RANLIB
-	  oldobjs=$objlist
-	  if test "X$oldobjs" = "X" ; then
-	    eval cmds=\"\$concat_cmds\"
 	  else
-	    eval cmds=\"\$concat_cmds~\$old_archive_cmds\"
+	    if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
+	      cmds=$archive_expsym_cmds
+	    else
+	      cmds=$archive_cmds
+	    fi
 	  fi
 	fi
-      fi
-      save_ifs="$IFS"; IFS='~'
-      for cmd in $cmds; do
-        eval cmd=\"$cmd\"
-	IFS="$save_ifs"
-	$show "$cmd"
-	$run eval "$cmd" || exit $?
-      done
-      IFS="$save_ifs"
-    done
 
-    if test -n "$generated"; then
-      $show "${rm}r$generated"
-      $run ${rm}r$generated
-    fi
+	if test -n "$delfiles"; then
+	  # Append the command to remove temporary files to $cmds.
+	  eval cmds=\"\$cmds~\$RM $delfiles\"
+	fi
 
-    # Now create the libtool archive.
-    case $output in
-    *.la)
-      old_library=
-      test "$build_old_libs" = yes && old_library="$libname.$libext"
-      $show "creating $output"
+	# Add any objects from preloaded convenience libraries
+	if test -n "$dlprefiles"; then
+	  gentop="$output_objdir/${outputname}x"
+	  generated="$generated $gentop"
 
-      # Preserve any variables that may affect compiler behavior
-      for var in $variables_saved_for_relink; do
-	if eval test -z \"\${$var+set}\"; then
-	  relink_command="{ test -z \"\${$var+set}\" || unset $var || { $var=; export $var; }; }; $relink_command"
-	elif eval var_value=\$$var; test -z "$var_value"; then
-	  relink_command="$var=; export $var; $relink_command"
-	else
-	  var_value=`$echo "X$var_value" | $Xsed -e "$sed_quote_subst"`
-	  relink_command="$var=\"$var_value\"; export $var; $relink_command"
+	  func_extract_archives $gentop $dlprefiles
+	  libobjs="$libobjs $func_extract_archives_result"
+	  test "X$libobjs" = "X " && libobjs=
 	fi
-      done
-      # Quote the link command for shipping.
-      relink_command="(cd `pwd`; $SHELL $progpath $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)"
-      relink_command=`$echo "X$relink_command" | $SP2NL | $Xsed -e "$sed_quote_subst" | $NL2SP`
-      if test "$hardcode_automatic" = yes ; then
-	relink_command=
-      fi
 
+	save_ifs="$IFS"; IFS='~'
+	for cmd in $cmds; do
+	  IFS="$save_ifs"
+	  eval cmd=\"$cmd\"
+	  $opt_silent || {
+	    func_quote_for_expand "$cmd"
+	    eval "func_echo $func_quote_for_expand_result"
+	  }
+	  $opt_dry_run || eval "$cmd" || {
+	    lt_exit=$?
 
-      # Only create the output if not a dry run.
-      if test -z "$run"; then
-	for installed in no yes; do
-	  if test "$installed" = yes; then
-	    if test -z "$install_libdir"; then
-	      break
+	    # Restore the uninstalled library and exit
+	    if test "$mode" = relink; then
+	      ( cd "$output_objdir" && \
+	        $RM "${realname}T" && \
+		$MV "${realname}U" "$realname" )
 	    fi
-	    output="$output_objdir/$outputname"i
-	    # Replace all uninstalled libtool libraries with the installed ones
-	    newdependency_libs=
-	    for deplib in $dependency_libs; do
-	      case $deplib in
-	      *.la)
-		name=`$echo "X$deplib" | $Xsed -e 's%^.*/%%'`
-		eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
-		if test -z "$libdir"; then
-		  $echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2
-		  exit $EXIT_FAILURE
-		fi
-		newdependency_libs="$newdependency_libs $libdir/$name"
-		;;
-	      *) newdependency_libs="$newdependency_libs $deplib" ;;
-	      esac
-	    done
-	    dependency_libs="$newdependency_libs"
-	    newdlfiles=
-	    for lib in $dlfiles; do
-	      name=`$echo "X$lib" | $Xsed -e 's%^.*/%%'`
-	      eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
-	      if test -z "$libdir"; then
-		$echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
-		exit $EXIT_FAILURE
-	      fi
-	      newdlfiles="$newdlfiles $libdir/$name"
-	    done
-	    dlfiles="$newdlfiles"
-	    newdlprefiles=
-	    for lib in $dlprefiles; do
-	      name=`$echo "X$lib" | $Xsed -e 's%^.*/%%'`
-	      eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
-	      if test -z "$libdir"; then
-		$echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
-		exit $EXIT_FAILURE
-	      fi
-	      newdlprefiles="$newdlprefiles $libdir/$name"
-	    done
-	    dlprefiles="$newdlprefiles"
-	  else
-	    newdlfiles=
-	    for lib in $dlfiles; do
-	      case $lib in
-		[\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;;
-		*) abs=`pwd`"/$lib" ;;
-	      esac
-	      newdlfiles="$newdlfiles $abs"
-	    done
-	    dlfiles="$newdlfiles"
-	    newdlprefiles=
-	    for lib in $dlprefiles; do
-	      case $lib in
-		[\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;;
-		*) abs=`pwd`"/$lib" ;;
-	      esac
-	      newdlprefiles="$newdlprefiles $abs"
-	    done
-	    dlprefiles="$newdlprefiles"
-	  fi
-	  $rm $output
-	  # place dlname in correct position for cygwin
-	  tdlname=$dlname
-	  case $host,$output,$installed,$module,$dlname in
-	    *cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll) tdlname=../bin/$dlname ;;
-	  esac
-	  $echo > $output "\
-# $outputname - a libtool library file
-# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP
-#
-# Please DO NOT delete this file!
-# It is necessary for linking the library.
 
-# The name that we can dlopen(3).
-dlname='$tdlname'
+	    exit $lt_exit
+	  }
+	done
+	IFS="$save_ifs"
 
-# Names of this library.
-library_names='$library_names'
+	# Restore the uninstalled library and exit
+	if test "$mode" = relink; then
+	  $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}T && $MV $realname ${realname}T && $MV ${realname}U $realname)' || exit $?
 
-# The name of the static archive.
-old_library='$old_library'
+	  if test -n "$convenience"; then
+	    if test -z "$whole_archive_flag_spec"; then
+	      func_show_eval '${RM}r "$gentop"'
+	    fi
+	  fi
 
-# Libraries that this one depends upon.
-dependency_libs='$dependency_libs'
+	  exit $EXIT_SUCCESS
+	fi
 
-# Version information for $libname.
-current=$current
-age=$age
-revision=$revision
+	# Create links to the real library.
+	for linkname in $linknames; do
+	  if test "$realname" != "$linkname"; then
+	    func_show_eval '(cd "$output_objdir" && $RM "$linkname" && $LN_S "$realname" "$linkname")' 'exit $?'
+	  fi
+	done
 
-# Is this an already installed library?
-installed=$installed
+	# If -module or -export-dynamic was specified, set the dlname.
+	if test "$module" = yes || test "$export_dynamic" = yes; then
+	  # On all known operating systems, these are identical.
+	  dlname="$soname"
+	fi
+      fi
+      ;;
 
-# Should we warn about portability when linking against -modules?
-shouldnotlink=$module
+    obj)
+      if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
+	func_warning "\`-dlopen' is ignored for objects"
+      fi
 
-# Files to dlopen/dlpreopen
-dlopen='$dlfiles'
-dlpreopen='$dlprefiles'
+      case " $deplibs" in
+      *\ -l* | *\ -L*)
+	func_warning "\`-l' and \`-L' are ignored for objects" ;;
+      esac
 
-# Directory that this library needs to be installed in:
-libdir='$install_libdir'"
-	  if test "$installed" = no && test "$need_relink" = yes; then
-	    $echo >> $output "\
-relink_command=\"$relink_command\""
-	  fi
-	done
-      fi
+      test -n "$rpath" && \
+	func_warning "\`-rpath' is ignored for objects"
 
-      # Do a symbolic link so that the libtool archive can be found in
-      # LD_LIBRARY_PATH before the program is installed.
-      $show "(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)"
-      $run eval '(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)' || exit $?
-      ;;
-    esac
-    exit $EXIT_SUCCESS
-    ;;
+      test -n "$xrpath" && \
+	func_warning "\`-R' is ignored for objects"
 
-  # libtool install mode
-  install)
-    modename="$modename: install"
+      test -n "$vinfo" && \
+	func_warning "\`-version-info' is ignored for objects"
 
-    # There may be an optional sh(1) argument at the beginning of
-    # install_prog (especially on Windows NT).
-    if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh ||
-       # Allow the use of GNU shtool's install command.
-       $echo "X$nonopt" | grep shtool > /dev/null; then
-      # Aesthetically quote it.
-      arg=`$echo "X$nonopt" | $Xsed -e "$sed_quote_subst"`
-      case $arg in
-      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
-	arg="\"$arg\""
+      test -n "$release" && \
+	func_warning "\`-release' is ignored for objects"
+
+      case $output in
+      *.lo)
+	test -n "$objs$old_deplibs" && \
+	  func_fatal_error "cannot build library object \`$output' from non-libtool objects"
+
+	libobj=$output
+	func_lo2o "$libobj"
+	obj=$func_lo2o_result
+	;;
+      *)
+	libobj=
+	obj="$output"
 	;;
       esac
-      install_prog="$arg "
-      arg="$1"
-      shift
-    else
-      install_prog=
-      arg=$nonopt
-    fi
 
-    # The real first argument should be the name of the installation program.
-    # Aesthetically quote it.
-    arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
-    case $arg in
-    *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
-      arg="\"$arg\""
-      ;;
-    esac
-    install_prog="$install_prog$arg"
+      # Delete the old objects.
+      $opt_dry_run || $RM $obj $libobj
 
-    # We need to accept at least all the BSD install flags.
-    dest=
-    files=
-    opts=
-    prev=
-    install_type=
-    isdir=no
-    stripme=
-    for arg
-    do
-      if test -n "$dest"; then
-	files="$files $dest"
-	dest=$arg
-	continue
-      fi
+      # Objects from convenience libraries.  This assumes
+      # single-version convenience libraries.  Whenever we create
+      # different ones for PIC/non-PIC, this we'll have to duplicate
+      # the extraction.
+      reload_conv_objs=
+      gentop=
+      # reload_cmds runs $LD directly, so let us get rid of
+      # -Wl from whole_archive_flag_spec and hope we can get by with
+      # turning comma into space..
+      wl=
 
-      case $arg in
-      -d) isdir=yes ;;
-      -f) 
-      	case " $install_prog " in
-	*[\\\ /]cp\ *) ;;
-	*) prev=$arg ;;
-	esac
-	;;
-      -g | -m | -o) prev=$arg ;;
-      -s)
-	stripme=" -s"
-	continue
-	;;
-      -*)
-	;;
-      *)
-	# If the previous option needed an argument, then skip it.
-	if test -n "$prev"; then
-	  prev=
+      if test -n "$convenience"; then
+	if test -n "$whole_archive_flag_spec"; then
+	  eval tmp_whole_archive_flags=\"$whole_archive_flag_spec\"
+	  reload_conv_objs=$reload_objs\ `$ECHO "X$tmp_whole_archive_flags" | $Xsed -e 's|,| |g'`
 	else
-	  dest=$arg
-	  continue
+	  gentop="$output_objdir/${obj}x"
+	  generated="$generated $gentop"
+
+	  func_extract_archives $gentop $convenience
+	  reload_conv_objs="$reload_objs $func_extract_archives_result"
 	fi
-	;;
-      esac
+      fi
 
-      # Aesthetically quote the argument.
-      arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
-      case $arg in
-      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
-	arg="\"$arg\""
-	;;
-      esac
-      install_prog="$install_prog $arg"
-    done
+      # Create the old-style object.
+      reload_objs="$objs$old_deplibs "`$ECHO "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}$'/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test
 
-    if test -z "$install_prog"; then
-      $echo "$modename: you must specify an install program" 1>&2
-      $echo "$help" 1>&2
-      exit $EXIT_FAILURE
-    fi
+      output="$obj"
+      func_execute_cmds "$reload_cmds" 'exit $?'
 
-    if test -n "$prev"; then
-      $echo "$modename: the \`$prev' option requires an argument" 1>&2
-      $echo "$help" 1>&2
-      exit $EXIT_FAILURE
-    fi
+      # Exit if we aren't doing a library object file.
+      if test -z "$libobj"; then
+	if test -n "$gentop"; then
+	  func_show_eval '${RM}r "$gentop"'
+	fi
 
-    if test -z "$files"; then
-      if test -z "$dest"; then
-	$echo "$modename: no file or destination specified" 1>&2
-      else
-	$echo "$modename: you must specify a destination" 1>&2
+	exit $EXIT_SUCCESS
       fi
-      $echo "$help" 1>&2
-      exit $EXIT_FAILURE
-    fi
 
-    # Strip any trailing slash from the destination.
-    dest=`$echo "X$dest" | $Xsed -e 's%/$%%'`
+      if test "$build_libtool_libs" != yes; then
+	if test -n "$gentop"; then
+	  func_show_eval '${RM}r "$gentop"'
+	fi
 
-    # Check to see that the destination is a directory.
-    test -d "$dest" && isdir=yes
-    if test "$isdir" = yes; then
-      destdir="$dest"
-      destname=
-    else
-      destdir=`$echo "X$dest" | $Xsed -e 's%/[^/]*$%%'`
-      test "X$destdir" = "X$dest" && destdir=.
-      destname=`$echo "X$dest" | $Xsed -e 's%^.*/%%'`
+	# Create an invalid libtool object if no PIC, so that we don't
+	# accidentally link it into a program.
+	# $show "echo timestamp > $libobj"
+	# $opt_dry_run || eval "echo timestamp > $libobj" || exit $?
+	exit $EXIT_SUCCESS
+      fi
 
-      # Not a directory, so check to see that there is only one file specified.
-      set dummy $files
-      if test "$#" -gt 2; then
-	$echo "$modename: \`$dest' is not a directory" 1>&2
-	$echo "$help" 1>&2
-	exit $EXIT_FAILURE
+      if test -n "$pic_flag" || test "$pic_mode" != default; then
+	# Only do commands if we really have different PIC objects.
+	reload_objs="$libobjs $reload_conv_objs"
+	output="$libobj"
+	func_execute_cmds "$reload_cmds" 'exit $?'
       fi
-    fi
-    case $destdir in
-    [\\/]* | [A-Za-z]:[\\/]*) ;;
-    *)
-      for file in $files; do
-	case $file in
-	*.lo) ;;
-	*)
-	  $echo "$modename: \`$destdir' must be an absolute directory name" 1>&2
-	  $echo "$help" 1>&2
-	  exit $EXIT_FAILURE
-	  ;;
-	esac
-      done
+
+      if test -n "$gentop"; then
+	func_show_eval '${RM}r "$gentop"'
+      fi
+
+      exit $EXIT_SUCCESS
       ;;
-    esac
 
-    # This variable tells wrapper scripts just to set variables rather
-    # than running their programs.
-    libtool_install_magic="$magic"
+    prog)
+      case $host in
+	*cygwin*) func_stripname '' '.exe' "$output"
+	          output=$func_stripname_result.exe;;
+      esac
+      test -n "$vinfo" && \
+	func_warning "\`-version-info' is ignored for programs"
 
-    staticlibs=
-    future_libdirs=
-    current_libdirs=
-    for file in $files; do
+      test -n "$release" && \
+	func_warning "\`-release' is ignored for programs"
 
-      # Do each installation.
-      case $file in
-      *.$libext)
-	# Do the static libraries later.
-	staticlibs="$staticlibs $file"
+      test "$preload" = yes \
+        && test "$dlopen_support" = unknown \
+	&& test "$dlopen_self" = unknown \
+	&& test "$dlopen_self_static" = unknown && \
+	  func_warning "\`LT_INIT([dlopen])' not used. Assuming no dlopen support."
+
+      case $host in
+      *-*-rhapsody* | *-*-darwin1.[012])
+	# On Rhapsody replace the C library is the System framework
+	compile_deplibs=`$ECHO "X $compile_deplibs" | $Xsed -e 's/ -lc / System.ltframework /'`
+	finalize_deplibs=`$ECHO "X $finalize_deplibs" | $Xsed -e 's/ -lc / System.ltframework /'`
 	;;
+      esac
 
-      *.la)
-	# Check to see that this really is a libtool archive.
-	if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
-	else
-	  $echo "$modename: \`$file' is not a valid libtool archive" 1>&2
-	  $echo "$help" 1>&2
-	  exit $EXIT_FAILURE
+      case $host in
+      *-*-darwin*)
+	# Don't allow lazy linking, it breaks C++ global constructors
+	# But is supposedly fixed on 10.4 or later (yay!).
+	if test "$tagname" = CXX ; then
+	  case ${MACOSX_DEPLOYMENT_TARGET-10.0} in
+	    10.[0123])
+	      compile_command="$compile_command ${wl}-bind_at_load"
+	      finalize_command="$finalize_command ${wl}-bind_at_load"
+	    ;;
+	  esac
 	fi
+	# Time to change all our "foo.ltframework" stuff back to "-framework foo"
+	compile_deplibs=`$ECHO "X $compile_deplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
+	finalize_deplibs=`$ECHO "X $finalize_deplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
+	;;
+      esac
 
-	library_names=
-	old_library=
-	relink_command=
-	# If there is no directory component, then add one.
-	case $file in
-	*/* | *\\*) . $file ;;
-	*) . ./$file ;;
-	esac
 
-	# Add the libdir to current_libdirs if it is the destination.
-	if test "X$destdir" = "X$libdir"; then
-	  case "$current_libdirs " in
-	  *" $libdir "*) ;;
-	  *) current_libdirs="$current_libdirs $libdir" ;;
+      # move library search paths that coincide with paths to not yet
+      # installed libraries to the beginning of the library search list
+      new_libs=
+      for path in $notinst_path; do
+	case " $new_libs " in
+	*" -L$path/$objdir "*) ;;
+	*)
+	  case " $compile_deplibs " in
+	  *" -L$path/$objdir "*)
+	    new_libs="$new_libs -L$path/$objdir" ;;
 	  esac
-	else
-	  # Note the libdir as a future libdir.
-	  case "$future_libdirs " in
-	  *" $libdir "*) ;;
-	  *) future_libdirs="$future_libdirs $libdir" ;;
+	  ;;
+	esac
+      done
+      for deplib in $compile_deplibs; do
+	case $deplib in
+	-L*)
+	  case " $new_libs " in
+	  *" $deplib "*) ;;
+	  *) new_libs="$new_libs $deplib" ;;
 	  esac
-	fi
+	  ;;
+	*) new_libs="$new_libs $deplib" ;;
+	esac
+      done
+      compile_deplibs="$new_libs"
 
-	dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`/
-	test "X$dir" = "X$file/" && dir=
-	dir="$dir$objdir"
 
-	if test -n "$relink_command"; then
-	  # Determine the prefix the user has applied to our future dir.
-	  inst_prefix_dir=`$echo "$destdir" | $SED "s%$libdir\$%%"`
+      compile_command="$compile_command $compile_deplibs"
+      finalize_command="$finalize_command $finalize_deplibs"
 
-	  # Don't allow the user to place us outside of our expected
-	  # location b/c this prevents finding dependent libraries that
-	  # are installed to the same prefix.
-	  # At present, this check doesn't affect windows .dll's that
-	  # are installed into $libdir/../bin (currently, that works fine)
-	  # but it's something to keep an eye on.
-	  if test "$inst_prefix_dir" = "$destdir"; then
-	    $echo "$modename: error: cannot install \`$file' to a directory not ending in $libdir" 1>&2
-	    exit $EXIT_FAILURE
-	  fi
+      if test -n "$rpath$xrpath"; then
+	# If the user specified any rpath flags, then add them.
+	for libdir in $rpath $xrpath; do
+	  # This is the magic to use -rpath.
+	  case "$finalize_rpath " in
+	  *" $libdir "*) ;;
+	  *) finalize_rpath="$finalize_rpath $libdir" ;;
+	  esac
+	done
+      fi
 
-	  if test -n "$inst_prefix_dir"; then
-	    # Stick the inst_prefix_dir data into the link command.
-	    relink_command=`$echo "$relink_command" | $SP2NL | $SED "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%" | $NL2SP`
+      # Now hardcode the library paths
+      rpath=
+      hardcode_libdirs=
+      for libdir in $compile_rpath $finalize_rpath; do
+	if test -n "$hardcode_libdir_flag_spec"; then
+	  if test -n "$hardcode_libdir_separator"; then
+	    if test -z "$hardcode_libdirs"; then
+	      hardcode_libdirs="$libdir"
+	    else
+	      # Just accumulate the unique libdirs.
+	      case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
+	      *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
+		;;
+	      *)
+		hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
+		;;
+	      esac
+	    fi
 	  else
-	    relink_command=`$echo "$relink_command" | $SP2NL | $SED "s%@inst_prefix_dir@%%" | $NL2SP`
+	    eval flag=\"$hardcode_libdir_flag_spec\"
+	    rpath="$rpath $flag"
 	  fi
+	elif test -n "$runpath_var"; then
+	  case "$perm_rpath " in
+	  *" $libdir "*) ;;
+	  *) perm_rpath="$perm_rpath $libdir" ;;
+	  esac
+	fi
+	case $host in
+	*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)
+	  testbindir=`${ECHO} "$libdir" | ${SED} -e 's*/lib$*/bin*'`
+	  case :$dllsearchpath: in
+	  *":$libdir:"*) ;;
+	  ::) dllsearchpath=$libdir;;
+	  *) dllsearchpath="$dllsearchpath:$libdir";;
+	  esac
+	  case :$dllsearchpath: in
+	  *":$testbindir:"*) ;;
+	  ::) dllsearchpath=$testbindir;;
+	  *) dllsearchpath="$dllsearchpath:$testbindir";;
+	  esac
+	  ;;
+	esac
+      done
+      # Substitute the hardcoded libdirs into the rpath.
+      if test -n "$hardcode_libdir_separator" &&
+	 test -n "$hardcode_libdirs"; then
+	libdir="$hardcode_libdirs"
+	eval rpath=\" $hardcode_libdir_flag_spec\"
+      fi
+      compile_rpath="$rpath"
 
-	  $echo "$modename: warning: relinking \`$file'" 1>&2
-	  $show "$relink_command"
-	  if $run eval "$relink_command"; then :
+      rpath=
+      hardcode_libdirs=
+      for libdir in $finalize_rpath; do
+	if test -n "$hardcode_libdir_flag_spec"; then
+	  if test -n "$hardcode_libdir_separator"; then
+	    if test -z "$hardcode_libdirs"; then
+	      hardcode_libdirs="$libdir"
+	    else
+	      # Just accumulate the unique libdirs.
+	      case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
+	      *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
+		;;
+	      *)
+		hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
+		;;
+	      esac
+	    fi
 	  else
-	    $echo "$modename: error: relink \`$file' with the above command before installing it" 1>&2
-	    exit $EXIT_FAILURE
+	    eval flag=\"$hardcode_libdir_flag_spec\"
+	    rpath="$rpath $flag"
 	  fi
+	elif test -n "$runpath_var"; then
+	  case "$finalize_perm_rpath " in
+	  *" $libdir "*) ;;
+	  *) finalize_perm_rpath="$finalize_perm_rpath $libdir" ;;
+	  esac
 	fi
+      done
+      # Substitute the hardcoded libdirs into the rpath.
+      if test -n "$hardcode_libdir_separator" &&
+	 test -n "$hardcode_libdirs"; then
+	libdir="$hardcode_libdirs"
+	eval rpath=\" $hardcode_libdir_flag_spec\"
+      fi
+      finalize_rpath="$rpath"
 
-	# See the names of the shared library.
-	set dummy $library_names
-	if test -n "$2"; then
-	  realname="$2"
-	  shift
-	  shift
+      if test -n "$libobjs" && test "$build_old_libs" = yes; then
+	# Transform all the library objects into standard objects.
+	compile_command=`$ECHO "X$compile_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
+	finalize_command=`$ECHO "X$finalize_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
+      fi
 
-	  srcname="$realname"
-	  test -n "$relink_command" && srcname="$realname"T
+      func_generate_dlsyms "$outputname" "@PROGRAM@" "no"
 
-	  # Install the shared library and build the symlinks.
-	  $show "$install_prog $dir/$srcname $destdir/$realname"
-	  $run eval "$install_prog $dir/$srcname $destdir/$realname" || exit $?
-	  if test -n "$stripme" && test -n "$striplib"; then
-	    $show "$striplib $destdir/$realname"
-	    $run eval "$striplib $destdir/$realname" || exit $?
-	  fi
+      # template prelinking step
+      if test -n "$prelink_cmds"; then
+	func_execute_cmds "$prelink_cmds" 'exit $?'
+      fi
 
-	  if test "$#" -gt 0; then
-	    # Delete the old symlinks, and create new ones.
-	    # Try `ln -sf' first, because the `ln' binary might depend on
-	    # the symlink we replace!  Solaris /bin/ln does not understand -f,
-	    # so we also need to try rm && ln -s.
-	    for linkname
-	    do
-	      if test "$linkname" != "$realname"; then
-                $show "(cd $destdir && { $LN_S -f $realname $linkname || { $rm $linkname && $LN_S $realname $linkname; }; })"
-                $run eval "(cd $destdir && { $LN_S -f $realname $linkname || { $rm $linkname && $LN_S $realname $linkname; }; })"
-	      fi
-	    done
-	  fi
+      wrappers_required=yes
+      case $host in
+      *cygwin* | *mingw* )
+        if test "$build_libtool_libs" != yes; then
+          wrappers_required=no
+        fi
+        ;;
+      *cegcc)
+        # Disable wrappers for cegcc, we are cross compiling anyway.
+        wrappers_required=no
+        ;;
+      *)
+        if test "$need_relink" = no || test "$build_libtool_libs" != yes; then
+          wrappers_required=no
+        fi
+        ;;
+      esac
+      if test "$wrappers_required" = no; then
+	# Replace the output file specification.
+	compile_command=`$ECHO "X$compile_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'`
+	link_command="$compile_command$compile_rpath"
 
-	  # Do each command in the postinstall commands.
-	  lib="$destdir/$realname"
-	  cmds=$postinstall_cmds
-	  save_ifs="$IFS"; IFS='~'
-	  for cmd in $cmds; do
-	    IFS="$save_ifs"
-	    eval cmd=\"$cmd\"
-	    $show "$cmd"
-	    $run eval "$cmd" || {
-	      lt_exit=$?
-
-	      # Restore the uninstalled library and exit
-	      if test "$mode" = relink; then
-		$run eval '(cd $output_objdir && $rm ${realname}T && $mv ${realname}U $realname)'
-	      fi
+	# We have no uninstalled library dependencies, so finalize right now.
+	exit_status=0
+	func_show_eval "$link_command" 'exit_status=$?'
 
-	      exit $lt_exit
-	    }
-	  done
-	  IFS="$save_ifs"
+	# Delete the generated files.
+	if test -f "$output_objdir/${outputname}S.${objext}"; then
+	  func_show_eval '$RM "$output_objdir/${outputname}S.${objext}"'
 	fi
 
-	# Install the pseudo-library for information purposes.
-	name=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
-	instname="$dir/$name"i
-	$show "$install_prog $instname $destdir/$name"
-	$run eval "$install_prog $instname $destdir/$name" || exit $?
-
-	# Maybe install the static library, too.
-	test -n "$old_library" && staticlibs="$staticlibs $dir/$old_library"
-	;;
+	exit $exit_status
+      fi
 
-      *.lo)
-	# Install (i.e. copy) a libtool object.
+      if test -n "$compile_shlibpath$finalize_shlibpath"; then
+	compile_command="$shlibpath_var=\"$compile_shlibpath$finalize_shlibpath\$$shlibpath_var\" $compile_command"
+      fi
+      if test -n "$finalize_shlibpath"; then
+	finalize_command="$shlibpath_var=\"$finalize_shlibpath\$$shlibpath_var\" $finalize_command"
+      fi
 
-	# Figure out destination file name, if it wasn't already specified.
-	if test -n "$destname"; then
-	  destfile="$destdir/$destname"
-	else
-	  destfile=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
-	  destfile="$destdir/$destfile"
+      compile_var=
+      finalize_var=
+      if test -n "$runpath_var"; then
+	if test -n "$perm_rpath"; then
+	  # We should set the runpath_var.
+	  rpath=
+	  for dir in $perm_rpath; do
+	    rpath="$rpath$dir:"
+	  done
+	  compile_var="$runpath_var=\"$rpath\$$runpath_var\" "
 	fi
-
-	# Deduce the name of the destination old-style object file.
-	case $destfile in
-	*.lo)
-	  staticdest=`$echo "X$destfile" | $Xsed -e "$lo2o"`
-	  ;;
-	*.$objext)
-	  staticdest="$destfile"
-	  destfile=
-	  ;;
-	*)
-	  $echo "$modename: cannot copy a libtool object to \`$destfile'" 1>&2
-	  $echo "$help" 1>&2
-	  exit $EXIT_FAILURE
-	  ;;
-	esac
-
-	# Install the libtool object if requested.
-	if test -n "$destfile"; then
-	  $show "$install_prog $file $destfile"
-	  $run eval "$install_prog $file $destfile" || exit $?
+	if test -n "$finalize_perm_rpath"; then
+	  # We should set the runpath_var.
+	  rpath=
+	  for dir in $finalize_perm_rpath; do
+	    rpath="$rpath$dir:"
+	  done
+	  finalize_var="$runpath_var=\"$rpath\$$runpath_var\" "
 	fi
+      fi
 
-	# Install the old object if enabled.
-	if test "$build_old_libs" = yes; then
-	  # Deduce the name of the old-style object file.
-	  staticobj=`$echo "X$file" | $Xsed -e "$lo2o"`
-
-	  $show "$install_prog $staticobj $staticdest"
-	  $run eval "$install_prog \$staticobj \$staticdest" || exit $?
-	fi
+      if test "$no_install" = yes; then
+	# We don't need to create a wrapper script.
+	link_command="$compile_var$compile_command$compile_rpath"
+	# Replace the output file specification.
+	link_command=`$ECHO "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'`
+	# Delete the old output file.
+	$opt_dry_run || $RM $output
+	# Link the executable and exit
+	func_show_eval "$link_command" 'exit $?'
 	exit $EXIT_SUCCESS
-	;;
+      fi
 
-      *)
-	# Figure out destination file name, if it wasn't already specified.
-	if test -n "$destname"; then
-	  destfile="$destdir/$destname"
+      if test "$hardcode_action" = relink; then
+	# Fast installation is not supported
+	link_command="$compile_var$compile_command$compile_rpath"
+	relink_command="$finalize_var$finalize_command$finalize_rpath"
+
+	func_warning "this platform does not like uninstalled shared libraries"
+	func_warning "\`$output' will be relinked during installation"
+      else
+	if test "$fast_install" != no; then
+	  link_command="$finalize_var$compile_command$finalize_rpath"
+	  if test "$fast_install" = yes; then
+	    relink_command=`$ECHO "X$compile_var$compile_command$compile_rpath" | $Xsed -e 's%@OUTPUT@%\$progdir/\$file%g'`
+	  else
+	    # fast_install is set to needless
+	    relink_command=
+	  fi
 	else
-	  destfile=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
-	  destfile="$destdir/$destfile"
+	  link_command="$compile_var$compile_command$compile_rpath"
+	  relink_command="$finalize_var$finalize_command$finalize_rpath"
 	fi
+      fi
 
-	# If the file is missing, and there is a .exe on the end, strip it
-	# because it is most likely a libtool script we actually want to
-	# install
-	stripped_ext=""
-	case $file in
-	  *.exe)
-	    if test ! -f "$file"; then
-	      file=`$echo $file|${SED} 's,.exe$,,'`
-	      stripped_ext=".exe"
-	    fi
-	    ;;
-	esac
-
-	# Do a test to see if this is really a libtool program.
-	case $host in
-	*cygwin*|*mingw*)
-	    wrapper=`$echo $file | ${SED} -e 's,.exe$,,'`
-	    ;;
-	*)
-	    wrapper=$file
-	    ;;
-	esac
-	if (${SED} -e '4q' $wrapper | grep "^# Generated by .*$PACKAGE")>/dev/null 2>&1; then
-	  notinst_deplibs=
-	  relink_command=
-
-	  # Note that it is not necessary on cygwin/mingw to append a dot to
-	  # foo even if both foo and FILE.exe exist: automatic-append-.exe
-	  # behavior happens only for exec(3), not for open(2)!  Also, sourcing
-	  # `FILE.' does not work on cygwin managed mounts.
-	  #
-	  # If there is no directory component, then add one.
-	  case $wrapper in
-	  */* | *\\*) . ${wrapper} ;;
-	  *) . ./${wrapper} ;;
-	  esac
-
-	  # Check the variables that should have been set.
-	  if test -z "$notinst_deplibs"; then
-	    $echo "$modename: invalid libtool wrapper script \`$wrapper'" 1>&2
-	    exit $EXIT_FAILURE
-	  fi
+      # Replace the output file specification.
+      link_command=`$ECHO "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'`
 
-	  finalize=yes
-	  for lib in $notinst_deplibs; do
-	    # Check to see that each library is installed.
-	    libdir=
-	    if test -f "$lib"; then
-	      # If there is no directory component, then add one.
-	      case $lib in
-	      */* | *\\*) . $lib ;;
-	      *) . ./$lib ;;
-	      esac
-	    fi
-	    libfile="$libdir/"`$echo "X$lib" | $Xsed -e 's%^.*/%%g'` ### testsuite: skip nested quoting test
-	    if test -n "$libdir" && test ! -f "$libfile"; then
-	      $echo "$modename: warning: \`$lib' has not been installed in \`$libdir'" 1>&2
-	      finalize=no
-	    fi
-	  done
+      # Delete the old output files.
+      $opt_dry_run || $RM $output $output_objdir/$outputname $output_objdir/lt-$outputname
 
-	  relink_command=
-	  # Note that it is not necessary on cygwin/mingw to append a dot to
-	  # foo even if both foo and FILE.exe exist: automatic-append-.exe
-	  # behavior happens only for exec(3), not for open(2)!  Also, sourcing
-	  # `FILE.' does not work on cygwin managed mounts.
-	  #
-	  # If there is no directory component, then add one.
-	  case $wrapper in
-	  */* | *\\*) . ${wrapper} ;;
-	  *) . ./${wrapper} ;;
-	  esac
+      func_show_eval "$link_command" 'exit $?'
 
-	  outputname=
-	  if test "$fast_install" = no && test -n "$relink_command"; then
-	    if test "$finalize" = yes && test -z "$run"; then
-	      tmpdir=`func_mktempdir`
-	      file=`$echo "X$file$stripped_ext" | $Xsed -e 's%^.*/%%'`
-	      outputname="$tmpdir/$file"
-	      # Replace the output file specification.
-	      relink_command=`$echo "X$relink_command" | $SP2NL | $Xsed -e 's%@OUTPUT@%'"$outputname"'%g' | $NL2SP`
+      # Now create the wrapper script.
+      func_verbose "creating $output"
 
-	      $show "$relink_command"
-	      if $run eval "$relink_command"; then :
-	      else
-		$echo "$modename: error: relink \`$file' with the above command before installing it" 1>&2
-		${rm}r "$tmpdir"
-		continue
-	      fi
-	      file="$outputname"
-	    else
-	      $echo "$modename: warning: cannot relink \`$file'" 1>&2
-	    fi
+      # Quote the relink command for shipping.
+      if test -n "$relink_command"; then
+	# Preserve any variables that may affect compiler behavior
+	for var in $variables_saved_for_relink; do
+	  if eval test -z \"\${$var+set}\"; then
+	    relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command"
+	  elif eval var_value=\$$var; test -z "$var_value"; then
+	    relink_command="$var=; export $var; $relink_command"
 	  else
-	    # Install the binary that we compiled earlier.
-	    file=`$echo "X$file$stripped_ext" | $Xsed -e "s%\([^/]*\)$%$objdir/\1%"`
+	    func_quote_for_eval "$var_value"
+	    relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command"
 	  fi
-	fi
+	done
+	relink_command="(cd `pwd`; $relink_command)"
+	relink_command=`$ECHO "X$relink_command" | $Xsed -e "$sed_quote_subst"`
+      fi
 
-	# remove .exe since cygwin /usr/bin/install will append another
-	# one anyway 
-	case $install_prog,$host in
-	*/usr/bin/install*,*cygwin*)
-	  case $file:$destfile in
-	  *.exe:*.exe)
-	    # this is ok
-	    ;;
-	  *.exe:*)
-	    destfile=$destfile.exe
-	    ;;
-	  *:*.exe)
-	    destfile=`$echo $destfile | ${SED} -e 's,.exe$,,'`
-	    ;;
-	  esac
-	  ;;
+      # Quote $ECHO for shipping.
+      if test "X$ECHO" = "X$SHELL $progpath --fallback-echo"; then
+	case $progpath in
+	[\\/]* | [A-Za-z]:[\\/]*) qecho="$SHELL $progpath --fallback-echo";;
+	*) qecho="$SHELL `pwd`/$progpath --fallback-echo";;
+	esac
+	qecho=`$ECHO "X$qecho" | $Xsed -e "$sed_quote_subst"`
+      else
+	qecho=`$ECHO "X$ECHO" | $Xsed -e "$sed_quote_subst"`
+      fi
+
+      # Only actually do things if not in dry run mode.
+      $opt_dry_run || {
+	# win32 will think the script is a binary if it has
+	# a .exe suffix, so we strip it off here.
+	case $output in
+	  *.exe) func_stripname '' '.exe' "$output"
+	         output=$func_stripname_result ;;
+	esac
+	# test for cygwin because mv fails w/o .exe extensions
+	case $host in
+	  *cygwin*)
+	    exeext=.exe
+	    func_stripname '' '.exe' "$outputname"
+	    outputname=$func_stripname_result ;;
+	  *) exeext= ;;
 	esac
-	$show "$install_prog$stripme $file $destfile"
-	$run eval "$install_prog\$stripme \$file \$destfile" || exit $?
-	test -n "$outputname" && ${rm}r "$tmpdir"
-	;;
-      esac
-    done
+	case $host in
+	  *cygwin* | *mingw* )
+	    func_dirname_and_basename "$output" "" "."
+	    output_name=$func_basename_result
+	    output_path=$func_dirname_result
+	    cwrappersource="$output_path/$objdir/lt-$output_name.c"
+	    cwrapper="$output_path/$output_name.exe"
+	    $RM $cwrappersource $cwrapper
+	    trap "$RM $cwrappersource $cwrapper; exit $EXIT_FAILURE" 1 2 15
+
+	    func_emit_cwrapperexe_src > $cwrappersource
+
+	    # The wrapper executable is built using the $host compiler,
+	    # because it contains $host paths and files. If cross-
+	    # compiling, it, like the target executable, must be
+	    # executed on the $host or under an emulation environment.
+	    $opt_dry_run || {
+	      $LTCC $LTCFLAGS -o $cwrapper $cwrappersource
+	      $STRIP $cwrapper
+	    }
 
-    for file in $staticlibs; do
-      name=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
+	    # Now, create the wrapper script for func_source use:
+	    func_ltwrapper_scriptname $cwrapper
+	    $RM $func_ltwrapper_scriptname_result
+	    trap "$RM $func_ltwrapper_scriptname_result; exit $EXIT_FAILURE" 1 2 15
+	    $opt_dry_run || {
+	      # note: this script will not be executed, so do not chmod.
+	      if test "x$build" = "x$host" ; then
+		$cwrapper --lt-dump-script > $func_ltwrapper_scriptname_result
+	      else
+		func_emit_wrapper no > $func_ltwrapper_scriptname_result
+	      fi
+	    }
+	  ;;
+	  * )
+	    $RM $output
+	    trap "$RM $output; exit $EXIT_FAILURE" 1 2 15
 
-      # Set up the ranlib parameters.
-      oldlib="$destdir/$name"
+	    func_emit_wrapper no > $output
+	    chmod +x $output
+	  ;;
+	esac
+      }
+      exit $EXIT_SUCCESS
+      ;;
+    esac
 
-      $show "$install_prog $file $oldlib"
-      $run eval "$install_prog \$file \$oldlib" || exit $?
+    # See if we need to build an old-fashioned archive.
+    for oldlib in $oldlibs; do
 
-      if test -n "$stripme" && test -n "$old_striplib"; then
-	$show "$old_striplib $oldlib"
-	$run eval "$old_striplib $oldlib" || exit $?
+      if test "$build_libtool_libs" = convenience; then
+	oldobjs="$libobjs_save $symfileobj"
+	addlibs="$convenience"
+	build_libtool_libs=no
+      else
+	if test "$build_libtool_libs" = module; then
+	  oldobjs="$libobjs_save"
+	  build_libtool_libs=no
+	else
+	  oldobjs="$old_deplibs $non_pic_objects"
+	  if test "$preload" = yes && test -f "$symfileobj"; then
+	    oldobjs="$oldobjs $symfileobj"
+	  fi
+	fi
+	addlibs="$old_convenience"
       fi
 
-      # Do each command in the postinstall commands.
-      cmds=$old_postinstall_cmds
-      save_ifs="$IFS"; IFS='~'
-      for cmd in $cmds; do
-	IFS="$save_ifs"
-	eval cmd=\"$cmd\"
-	$show "$cmd"
-	$run eval "$cmd" || exit $?
-      done
-      IFS="$save_ifs"
-    done
+      if test -n "$addlibs"; then
+	gentop="$output_objdir/${outputname}x"
+	generated="$generated $gentop"
 
-    if test -n "$future_libdirs"; then
-      $echo "$modename: warning: remember to run \`$progname --finish$future_libdirs'" 1>&2
-    fi
+	func_extract_archives $gentop $addlibs
+	oldobjs="$oldobjs $func_extract_archives_result"
+      fi
 
-    if test -n "$current_libdirs"; then
-      # Maybe just do a dry run.
-      test -n "$run" && current_libdirs=" -n$current_libdirs"
-      exec_cmd='$SHELL $progpath $preserve_args --finish$current_libdirs'
-    else
-      exit $EXIT_SUCCESS
-    fi
-    ;;
+      # Do each command in the archive commands.
+      if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then
+	cmds=$old_archive_from_new_cmds
+      else
 
-  # libtool finish mode
-  finish)
-    modename="$modename: finish"
-    libdirs="$nonopt"
-    admincmds=
+	# Add any objects from preloaded convenience libraries
+	if test -n "$dlprefiles"; then
+	  gentop="$output_objdir/${outputname}x"
+	  generated="$generated $gentop"
 
-    if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then
-      for dir
-      do
-	libdirs="$libdirs $dir"
-      done
+	  func_extract_archives $gentop $dlprefiles
+	  oldobjs="$oldobjs $func_extract_archives_result"
+	fi
 
-      for libdir in $libdirs; do
-	if test -n "$finish_cmds"; then
-	  # Do each command in the finish commands.
-	  cmds=$finish_cmds
-	  save_ifs="$IFS"; IFS='~'
-	  for cmd in $cmds; do
-	    IFS="$save_ifs"
-	    eval cmd=\"$cmd\"
-	    $show "$cmd"
-	    $run eval "$cmd" || admincmds="$admincmds
-       $cmd"
+	# POSIX demands no paths to be encoded in archives.  We have
+	# to avoid creating archives with duplicate basenames if we
+	# might have to extract them afterwards, e.g., when creating a
+	# static archive out of a convenience library, or when linking
+	# the entirety of a libtool archive into another (currently
+	# not supported by libtool).
+	if (for obj in $oldobjs
+	    do
+	      func_basename "$obj"
+	      $ECHO "$func_basename_result"
+	    done | sort | sort -uc >/dev/null 2>&1); then
+	  :
+	else
+	  $ECHO "copying selected object files to avoid basename conflicts..."
+	  gentop="$output_objdir/${outputname}x"
+	  generated="$generated $gentop"
+	  func_mkdir_p "$gentop"
+	  save_oldobjs=$oldobjs
+	  oldobjs=
+	  counter=1
+	  for obj in $save_oldobjs
+	  do
+	    func_basename "$obj"
+	    objbase="$func_basename_result"
+	    case " $oldobjs " in
+	    " ") oldobjs=$obj ;;
+	    *[\ /]"$objbase "*)
+	      while :; do
+		# Make sure we don't pick an alternate name that also
+		# overlaps.
+		newobj=lt$counter-$objbase
+		func_arith $counter + 1
+		counter=$func_arith_result
+		case " $oldobjs " in
+		*[\ /]"$newobj "*) ;;
+		*) if test ! -f "$gentop/$newobj"; then break; fi ;;
+		esac
+	      done
+	      func_show_eval "ln $obj $gentop/$newobj || cp $obj $gentop/$newobj"
+	      oldobjs="$oldobjs $gentop/$newobj"
+	      ;;
+	    *) oldobjs="$oldobjs $obj" ;;
+	    esac
 	  done
-	  IFS="$save_ifs"
-	fi
-	if test -n "$finish_eval"; then
-	  # Do the single finish_eval.
-	  eval cmds=\"$finish_eval\"
-	  $run eval "$cmds" || admincmds="$admincmds
-       $cmds"
 	fi
-      done
-    fi
-
-    # Exit here if they wanted silent mode.
-    test "$show" = : && exit $EXIT_SUCCESS
+	eval cmds=\"$old_archive_cmds\"
 
-    $echo "X----------------------------------------------------------------------" | $Xsed
-    $echo "Libraries have been installed in:"
-    for libdir in $libdirs; do
-      $echo "   $libdir"
+	func_len " $cmds"
+	len=$func_len_result
+	if test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then
+	  cmds=$old_archive_cmds
+	else
+	  # the command line is too long to link in one step, link in parts
+	  func_verbose "using piecewise archive linking..."
+	  save_RANLIB=$RANLIB
+	  RANLIB=:
+	  objlist=
+	  concat_cmds=
+	  save_oldobjs=$oldobjs
+	  oldobjs=
+	  # Is there a better way of finding the last object in the list?
+	  for obj in $save_oldobjs
+	  do
+	    last_oldobj=$obj
+	  done
+	  eval test_cmds=\"$old_archive_cmds\"
+	  func_len " $test_cmds"
+	  len0=$func_len_result
+	  len=$len0
+	  for obj in $save_oldobjs
+	  do
+	    func_len " $obj"
+	    func_arith $len + $func_len_result
+	    len=$func_arith_result
+	    func_append objlist " $obj"
+	    if test "$len" -lt "$max_cmd_len"; then
+	      :
+	    else
+	      # the above command should be used before it gets too long
+	      oldobjs=$objlist
+	      if test "$obj" = "$last_oldobj" ; then
+		RANLIB=$save_RANLIB
+	      fi
+	      test -z "$concat_cmds" || concat_cmds=$concat_cmds~
+	      eval concat_cmds=\"\${concat_cmds}$old_archive_cmds\"
+	      objlist=
+	      len=$len0
+	    fi
+	  done
+	  RANLIB=$save_RANLIB
+	  oldobjs=$objlist
+	  if test "X$oldobjs" = "X" ; then
+	    eval cmds=\"\$concat_cmds\"
+	  else
+	    eval cmds=\"\$concat_cmds~\$old_archive_cmds\"
+	  fi
+	fi
+      fi
+      func_execute_cmds "$cmds" 'exit $?'
     done
-    $echo
-    $echo "If you ever happen to want to link against installed libraries"
-    $echo "in a given directory, LIBDIR, you must either use libtool, and"
-    $echo "specify the full pathname of the library, or use the \`-LLIBDIR'"
-    $echo "flag during linking and do at least one of the following:"
-    if test -n "$shlibpath_var"; then
-      $echo "   - add LIBDIR to the \`$shlibpath_var' environment variable"
-      $echo "     during execution"
-    fi
-    if test -n "$runpath_var"; then
-      $echo "   - add LIBDIR to the \`$runpath_var' environment variable"
-      $echo "     during linking"
-    fi
-    if test -n "$hardcode_libdir_flag_spec"; then
-      libdir=LIBDIR
-      eval flag=\"$hardcode_libdir_flag_spec\"
-
-      $echo "   - use the \`$flag' linker flag"
-    fi
-    if test -n "$admincmds"; then
-      $echo "   - have your system administrator run these commands:$admincmds"
-    fi
-    if test -f /etc/ld.so.conf; then
-      $echo "   - have your system administrator add LIBDIR to \`/etc/ld.so.conf'"
-    fi
-    $echo
-    $echo "See any operating system documentation about shared libraries for"
-    $echo "more information, such as the ld(1) and ld.so(8) manual pages."
-    $echo "X----------------------------------------------------------------------" | $Xsed
-    exit $EXIT_SUCCESS
-    ;;
-
-  # libtool execute mode
-  execute)
-    modename="$modename: execute"
 
-    # The first argument is the command name.
-    cmd="$nonopt"
-    if test -z "$cmd"; then
-      $echo "$modename: you must specify a COMMAND" 1>&2
-      $echo "$help"
-      exit $EXIT_FAILURE
-    fi
+    test -n "$generated" && \
+      func_show_eval "${RM}r$generated"
 
-    # Handle -dlopen flags immediately.
-    for file in $execute_dlfiles; do
-      if test ! -f "$file"; then
-	$echo "$modename: \`$file' is not a file" 1>&2
-	$echo "$help" 1>&2
-	exit $EXIT_FAILURE
-      fi
+    # Now create the libtool archive.
+    case $output in
+    *.la)
+      old_library=
+      test "$build_old_libs" = yes && old_library="$libname.$libext"
+      func_verbose "creating $output"
 
-      dir=
-      case $file in
-      *.la)
-	# Check to see that this really is a libtool archive.
-	if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
+      # Preserve any variables that may affect compiler behavior
+      for var in $variables_saved_for_relink; do
+	if eval test -z \"\${$var+set}\"; then
+	  relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command"
+	elif eval var_value=\$$var; test -z "$var_value"; then
+	  relink_command="$var=; export $var; $relink_command"
 	else
-	  $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
-	  $echo "$help" 1>&2
-	  exit $EXIT_FAILURE
+	  func_quote_for_eval "$var_value"
+	  relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command"
 	fi
+      done
+      # Quote the link command for shipping.
+      relink_command="(cd `pwd`; $SHELL $progpath $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)"
+      relink_command=`$ECHO "X$relink_command" | $Xsed -e "$sed_quote_subst"`
+      if test "$hardcode_automatic" = yes ; then
+	relink_command=
+      fi
 
-	# Read the libtool library.
-	dlname=
-	library_names=
+      # Only create the output if not a dry run.
+      $opt_dry_run || {
+	for installed in no yes; do
+	  if test "$installed" = yes; then
+	    if test -z "$install_libdir"; then
+	      break
+	    fi
+	    output="$output_objdir/$outputname"i
+	    # Replace all uninstalled libtool libraries with the installed ones
+	    newdependency_libs=
+	    for deplib in $dependency_libs; do
+	      case $deplib in
+	      *.la)
+		func_basename "$deplib"
+		name="$func_basename_result"
+		eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
+		test -z "$libdir" && \
+		  func_fatal_error "\`$deplib' is not a valid libtool archive"
+		newdependency_libs="$newdependency_libs $libdir/$name"
+		;;
+	      *) newdependency_libs="$newdependency_libs $deplib" ;;
+	      esac
+	    done
+	    dependency_libs="$newdependency_libs"
+	    newdlfiles=
+
+	    for lib in $dlfiles; do
+	      case $lib in
+	      *.la)
+	        func_basename "$lib"
+		name="$func_basename_result"
+		eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
+		test -z "$libdir" && \
+		  func_fatal_error "\`$lib' is not a valid libtool archive"
+		newdlfiles="$newdlfiles $libdir/$name"
+		;;
+	      *) newdlfiles="$newdlfiles $lib" ;;
+	      esac
+	    done
+	    dlfiles="$newdlfiles"
+	    newdlprefiles=
+	    for lib in $dlprefiles; do
+	      case $lib in
+	      *.la)
+		# Only pass preopened files to the pseudo-archive (for
+		# eventual linking with the app. that links it) if we
+		# didn't already link the preopened objects directly into
+		# the library:
+		func_basename "$lib"
+		name="$func_basename_result"
+		eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
+		test -z "$libdir" && \
+		  func_fatal_error "\`$lib' is not a valid libtool archive"
+		newdlprefiles="$newdlprefiles $libdir/$name"
+		;;
+	      esac
+	    done
+	    dlprefiles="$newdlprefiles"
+	  else
+	    newdlfiles=
+	    for lib in $dlfiles; do
+	      case $lib in
+		[\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;;
+		*) abs=`pwd`"/$lib" ;;
+	      esac
+	      newdlfiles="$newdlfiles $abs"
+	    done
+	    dlfiles="$newdlfiles"
+	    newdlprefiles=
+	    for lib in $dlprefiles; do
+	      case $lib in
+		[\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;;
+		*) abs=`pwd`"/$lib" ;;
+	      esac
+	      newdlprefiles="$newdlprefiles $abs"
+	    done
+	    dlprefiles="$newdlprefiles"
+	  fi
+	  $RM $output
+	  # place dlname in correct position for cygwin
+	  tdlname=$dlname
+	  case $host,$output,$installed,$module,$dlname in
+	    *cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll | *cegcc*,*lai,yes,no,*.dll) tdlname=../bin/$dlname ;;
+	  esac
+	  $ECHO > $output "\
+# $outputname - a libtool library file
+# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
+#
+# Please DO NOT delete this file!
+# It is necessary for linking the library.
 
-	# If there is no directory component, then add one.
-	case $file in
-	*/* | *\\*) . $file ;;
-	*) . ./$file ;;
-	esac
+# The name that we can dlopen(3).
+dlname='$tdlname'
 
-	# Skip this library if it cannot be dlopened.
-	if test -z "$dlname"; then
-	  # Warn if it was a shared library.
-	  test -n "$library_names" && $echo "$modename: warning: \`$file' was not linked with \`-export-dynamic'"
-	  continue
-	fi
+# Names of this library.
+library_names='$library_names'
 
-	dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`
-	test "X$dir" = "X$file" && dir=.
+# The name of the static archive.
+old_library='$old_library'
 
-	if test -f "$dir/$objdir/$dlname"; then
-	  dir="$dir/$objdir"
-	else
-	  if test ! -f "$dir/$dlname"; then
-	    $echo "$modename: cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'" 1>&2
-	    exit $EXIT_FAILURE
-	  fi
-	fi
-	;;
+# Linker flags that can not go in dependency_libs.
+inherited_linker_flags='$new_inherited_linker_flags'
 
-      *.lo)
-	# Just add the directory containing the .lo file.
-	dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`
-	test "X$dir" = "X$file" && dir=.
-	;;
+# Libraries that this one depends upon.
+dependency_libs='$dependency_libs'
 
-      *)
-	$echo "$modename: warning \`-dlopen' is ignored for non-libtool libraries and objects" 1>&2
-	continue
-	;;
-      esac
+# Names of additional weak libraries provided by this library
+weak_library_names='$weak_libs'
 
-      # Get the absolute pathname.
-      absdir=`cd "$dir" && pwd`
-      test -n "$absdir" && dir="$absdir"
+# Version information for $libname.
+current=$current
+age=$age
+revision=$revision
 
-      # Now add the directory to shlibpath_var.
-      if eval "test -z \"\$$shlibpath_var\""; then
-	eval "$shlibpath_var=\"\$dir\""
-      else
-	eval "$shlibpath_var=\"\$dir:\$$shlibpath_var\""
-      fi
-    done
+# Is this an already installed library?
+installed=$installed
 
-    # This variable tells wrapper scripts just to set shlibpath_var
-    # rather than running their programs.
-    libtool_execute_magic="$magic"
+# Should we warn about portability when linking against -modules?
+shouldnotlink=$module
 
-    # Check if any of the arguments is a wrapper script.
-    args=
-    for file
-    do
-      case $file in
-      -*) ;;
-      *)
-	# Do a test to see if this is really a libtool program.
-	if (${SED} -e '4q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
-	  # If there is no directory component, then add one.
-	  case $file in
-	  */* | *\\*) . $file ;;
-	  *) . ./$file ;;
-	  esac
+# Files to dlopen/dlpreopen
+dlopen='$dlfiles'
+dlpreopen='$dlprefiles'
 
-	  # Transform arg to wrapped name.
-	  file="$progdir/$program"
-	fi
-	;;
-      esac
-      # Quote arguments (to preserve shell metacharacters).
-      file=`$echo "X$file" | $Xsed -e "$sed_quote_subst"`
-      args="$args \"$file\""
-    done
+# Directory that this library needs to be installed in:
+libdir='$install_libdir'"
+	  if test "$installed" = no && test "$need_relink" = yes; then
+	    $ECHO >> $output "\
+relink_command=\"$relink_command\""
+	  fi
+	done
+      }
 
-    if test -z "$run"; then
-      if test -n "$shlibpath_var"; then
-	# Export the shlibpath_var.
-	eval "export $shlibpath_var"
-      fi
+      # Do a symbolic link so that the libtool archive can be found in
+      # LD_LIBRARY_PATH before the program is installed.
+      func_show_eval '( cd "$output_objdir" && $RM "$outputname" && $LN_S "../$outputname" "$outputname" )' 'exit $?'
+      ;;
+    esac
+    exit $EXIT_SUCCESS
+}
 
-      # Restore saved environment variables
-      for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
-      do
-	eval "if test \"\${save_$lt_var+set}\" = set; then
-		$lt_var=\$save_$lt_var; export $lt_var
-	      fi"
-      done
+{ test "$mode" = link || test "$mode" = relink; } &&
+    func_mode_link ${1+"$@"}
 
-      # Now prepare to actually exec the command.
-      exec_cmd="\$cmd$args"
-    else
-      # Display what would be done.
-      if test -n "$shlibpath_var"; then
-	eval "\$echo \"\$shlibpath_var=\$$shlibpath_var\""
-	$echo "export $shlibpath_var"
-      fi
-      $echo "$cmd$args"
-      exit $EXIT_SUCCESS
-    fi
-    ;;
 
-  # libtool clean and uninstall mode
-  clean | uninstall)
-    modename="$modename: $mode"
-    rm="$nonopt"
+# func_mode_uninstall arg...
+func_mode_uninstall ()
+{
+    $opt_debug
+    RM="$nonopt"
     files=
     rmforce=
     exit_status=0
@@ -6559,30 +8209,28 @@
     for arg
     do
       case $arg in
-      -f) rm="$rm $arg"; rmforce=yes ;;
-      -*) rm="$rm $arg" ;;
+      -f) RM="$RM $arg"; rmforce=yes ;;
+      -*) RM="$RM $arg" ;;
       *) files="$files $arg" ;;
       esac
     done
 
-    if test -z "$rm"; then
-      $echo "$modename: you must specify an RM program" 1>&2
-      $echo "$help" 1>&2
-      exit $EXIT_FAILURE
-    fi
+    test -z "$RM" && \
+      func_fatal_help "you must specify an RM program"
 
     rmdirs=
 
     origobjdir="$objdir"
     for file in $files; do
-      dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`
-      if test "X$dir" = "X$file"; then
-	dir=.
+      func_dirname "$file" "" "."
+      dir="$func_dirname_result"
+      if test "X$dir" = X.; then
 	objdir="$origobjdir"
       else
 	objdir="$dir/$origobjdir"
       fi
-      name=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
+      func_basename "$file"
+      name="$func_basename_result"
       test "$mode" = uninstall && objdir="$dir"
 
       # Remember objdir for removal later, being careful to avoid duplicates
@@ -6594,9 +8242,9 @@
       fi
 
       # Don't error if the file doesn't exist and rm -f was used.
-      if (test -L "$file") >/dev/null 2>&1 \
-	|| (test -h "$file") >/dev/null 2>&1 \
-	|| test -f "$file"; then
+      if { test -L "$file"; } >/dev/null 2>&1 ||
+	 { test -h "$file"; } >/dev/null 2>&1 ||
+	 test -f "$file"; then
 	:
       elif test -d "$file"; then
 	exit_status=1
@@ -6610,8 +8258,8 @@
       case $name in
       *.la)
 	# Possibly a libtool archive, so verify it.
-	if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
-	  . $dir/$name
+	if func_lalib_p "$file"; then
+	  func_source $dir/$name
 
 	  # Delete the libtool libraries and symlinks.
 	  for n in $library_names; do
@@ -6626,39 +8274,17 @@
 	    *" $dlname "*) ;;
 	    *) rmfiles="$rmfiles $objdir/$dlname" ;;
 	    esac
-	     test -n "$libdir" && rmfiles="$rmfiles $objdir/$name $objdir/${name}i"
+	    test -n "$libdir" && rmfiles="$rmfiles $objdir/$name $objdir/${name}i"
 	    ;;
 	  uninstall)
 	    if test -n "$library_names"; then
 	      # Do each command in the postuninstall commands.
-	      cmds=$postuninstall_cmds
-	      save_ifs="$IFS"; IFS='~'
-	      for cmd in $cmds; do
-		IFS="$save_ifs"
-		eval cmd=\"$cmd\"
-		$show "$cmd"
-		$run eval "$cmd"
-		if test "$?" -ne 0 && test "$rmforce" != yes; then
-		  exit_status=1
-		fi
-	      done
-	      IFS="$save_ifs"
+	      func_execute_cmds "$postuninstall_cmds" 'test "$rmforce" = yes || exit_status=1'
 	    fi
 
 	    if test -n "$old_library"; then
 	      # Do each command in the old_postuninstall commands.
-	      cmds=$old_postuninstall_cmds
-	      save_ifs="$IFS"; IFS='~'
-	      for cmd in $cmds; do
-		IFS="$save_ifs"
-		eval cmd=\"$cmd\"
-		$show "$cmd"
-		$run eval "$cmd"
-		if test "$?" -ne 0 && test "$rmforce" != yes; then
-		  exit_status=1
-		fi
-	      done
-	      IFS="$save_ifs"
+	      func_execute_cmds "$old_postuninstall_cmds" 'test "$rmforce" = yes || exit_status=1'
 	    fi
 	    # FIXME: should reinstall the best remaining shared library.
 	    ;;
@@ -6668,20 +8294,20 @@
 
       *.lo)
 	# Possibly a libtool object, so verify it.
-	if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
+	if func_lalib_p "$file"; then
 
 	  # Read the .lo file
-	  . $dir/$name
+	  func_source $dir/$name
 
 	  # Add PIC object to the list of files to remove.
-	  if test -n "$pic_object" \
-	     && test "$pic_object" != none; then
+	  if test -n "$pic_object" &&
+	     test "$pic_object" != none; then
 	    rmfiles="$rmfiles $dir/$pic_object"
 	  fi
 
 	  # Add non-PIC object to the list of files to remove.
-	  if test -n "$non_pic_object" \
-	     && test "$non_pic_object" != none; then
+	  if test -n "$non_pic_object" &&
+	     test "$non_pic_object" != none; then
 	    rmfiles="$rmfiles $dir/$non_pic_object"
 	  fi
 	fi
@@ -6692,17 +8318,26 @@
 	  noexename=$name
 	  case $file in
 	  *.exe)
-	    file=`$echo $file|${SED} 's,.exe$,,'`
-	    noexename=`$echo $name|${SED} 's,.exe$,,'`
+	    func_stripname '' '.exe' "$file"
+	    file=$func_stripname_result
+	    func_stripname '' '.exe' "$name"
+	    noexename=$func_stripname_result
 	    # $file with .exe has already been added to rmfiles,
 	    # add $file without .exe
 	    rmfiles="$rmfiles $file"
 	    ;;
 	  esac
 	  # Do a test to see if this is a libtool program.
-	  if (${SED} -e '4q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
-	    relink_command=
-	    . $dir/$noexename
+	  if func_ltwrapper_p "$file"; then
+	    if func_ltwrapper_executable_p "$file"; then
+	      func_ltwrapper_scriptname "$file"
+	      relink_command=
+	      func_source $func_ltwrapper_scriptname_result
+	      rmfiles="$rmfiles $func_ltwrapper_scriptname_result"
+	    else
+	      relink_command=
+	      func_source $dir/$noexename
+	    fi
 
 	    # note $name still contains .exe if it was in $file originally
 	    # as does the version of $file that was added into $rmfiles
@@ -6717,239 +8352,38 @@
 	fi
 	;;
       esac
-      $show "$rm $rmfiles"
-      $run $rm $rmfiles || exit_status=1
+      func_show_eval "$RM $rmfiles" 'exit_status=1'
     done
     objdir="$origobjdir"
 
     # Try to remove the ${objdir}s in the directories where we deleted files
     for dir in $rmdirs; do
       if test -d "$dir"; then
-	$show "rmdir $dir"
-	$run rmdir $dir >/dev/null 2>&1
+	func_show_eval "rmdir $dir >/dev/null 2>&1"
       fi
     done
 
     exit $exit_status
-    ;;
+}
 
-  "")
-    $echo "$modename: you must specify a MODE" 1>&2
-    $echo "$generic_help" 1>&2
-    exit $EXIT_FAILURE
-    ;;
-  esac
+{ test "$mode" = uninstall || test "$mode" = clean; } &&
+    func_mode_uninstall ${1+"$@"}
 
-  if test -z "$exec_cmd"; then
-    $echo "$modename: invalid operation mode \`$mode'" 1>&2
-    $echo "$generic_help" 1>&2
-    exit $EXIT_FAILURE
-  fi
-fi # test -z "$show_help"
+test -z "$mode" && {
+  help="$generic_help"
+  func_fatal_help "you must specify a MODE"
+}
+
+test -z "$exec_cmd" && \
+  func_fatal_help "invalid operation mode \`$mode'"
 
 if test -n "$exec_cmd"; then
-  eval exec $exec_cmd
+  eval exec "$exec_cmd"
   exit $EXIT_FAILURE
 fi
 
-# We need to display help for each of the modes.
-case $mode in
-"") $echo \
-"Usage: $modename [OPTION]... [MODE-ARG]...
-
-Provide generalized library-building support services.
-
-    --config          show all configuration variables
-    --debug           enable verbose shell tracing
--n, --dry-run         display commands without modifying any files
-    --features        display basic configuration information and exit
-    --finish          same as \`--mode=finish'
-    --help            display this help message and exit
-    --mode=MODE       use operation mode MODE [default=inferred from MODE-ARGS]
-    --quiet           same as \`--silent'
-    --silent          don't print informational messages
-    --tag=TAG         use configuration variables from tag TAG
-    --version         print version information
-
-MODE must be one of the following:
-
-      clean           remove files from the build directory
-      compile         compile a source file into a libtool object
-      execute         automatically set library path, then run a program
-      finish          complete the installation of libtool libraries
-      install         install libraries or executables
-      link            create a library or an executable
-      uninstall       remove libraries from an installed directory
-
-MODE-ARGS vary depending on the MODE.  Try \`$modename --help --mode=MODE' for
-a more detailed description of MODE.
-
-Report bugs to <bug-libtool@gnu.org>."
-  exit $EXIT_SUCCESS
-  ;;
-
-clean)
-  $echo \
-"Usage: $modename [OPTION]... --mode=clean RM [RM-OPTION]... FILE...
-
-Remove files from the build directory.
-
-RM is the name of the program to use to delete files associated with each FILE
-(typically \`/bin/rm').  RM-OPTIONS are options (such as \`-f') to be passed
-to RM.
-
-If FILE is a libtool library, object or program, all the files associated
-with it are deleted. Otherwise, only FILE itself is deleted using RM."
-  ;;
-
-compile)
-  $echo \
-"Usage: $modename [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE
-
-Compile a source file into a libtool library object.
-
-This mode accepts the following additional options:
-
-  -o OUTPUT-FILE    set the output file name to OUTPUT-FILE
-  -prefer-pic       try to building PIC objects only
-  -prefer-non-pic   try to building non-PIC objects only
-  -static           always build a \`.o' file suitable for static linking
-
-COMPILE-COMMAND is a command to be used in creating a \`standard' object file
-from the given SOURCEFILE.
-
-The output file name is determined by removing the directory component from
-SOURCEFILE, then substituting the C source code suffix \`.c' with the
-library object suffix, \`.lo'."
-  ;;
-
-execute)
-  $echo \
-"Usage: $modename [OPTION]... --mode=execute COMMAND [ARGS]...
-
-Automatically set library path, then run a program.
-
-This mode accepts the following additional options:
-
-  -dlopen FILE      add the directory containing FILE to the library path
-
-This mode sets the library path environment variable according to \`-dlopen'
-flags.
-
-If any of the ARGS are libtool executable wrappers, then they are translated
-into their corresponding uninstalled binary, and any of their required library
-directories are added to the library path.
-
-Then, COMMAND is executed, with ARGS as arguments."
-  ;;
-
-finish)
-  $echo \
-"Usage: $modename [OPTION]... --mode=finish [LIBDIR]...
-
-Complete the installation of libtool libraries.
-
-Each LIBDIR is a directory that contains libtool libraries.
-
-The commands that this mode executes may require superuser privileges.  Use
-the \`--dry-run' option if you just want to see what would be executed."
-  ;;
-
-install)
-  $echo \
-"Usage: $modename [OPTION]... --mode=install INSTALL-COMMAND...
-
-Install executables or libraries.
-
-INSTALL-COMMAND is the installation command.  The first component should be
-either the \`install' or \`cp' program.
-
-The rest of the components are interpreted as arguments to that command (only
-BSD-compatible install options are recognized)."
-  ;;
-
-link)
-  $echo \
-"Usage: $modename [OPTION]... --mode=link LINK-COMMAND...
-
-Link object files or libraries together to form another library, or to
-create an executable program.
+exit $exit_status
 
-LINK-COMMAND is a command using the C compiler that you would use to create
-a program from several object files.
-
-The following components of LINK-COMMAND are treated specially:
-
-  -all-static       do not do any dynamic linking at all
-  -avoid-version    do not add a version suffix if possible
-  -dlopen FILE      \`-dlpreopen' FILE if it cannot be dlopened at runtime
-  -dlpreopen FILE   link in FILE and add its symbols to lt_preloaded_symbols
-  -export-dynamic   allow symbols from OUTPUT-FILE to be resolved with dlsym(3)
-  -export-symbols SYMFILE
-                    try to export only the symbols listed in SYMFILE
-  -export-symbols-regex REGEX
-                    try to export only the symbols matching REGEX
-  -LLIBDIR          search LIBDIR for required installed libraries
-  -lNAME            OUTPUT-FILE requires the installed library libNAME
-  -module           build a library that can dlopened
-  -no-fast-install  disable the fast-install mode
-  -no-install       link a not-installable executable
-  -no-undefined     declare that a library does not refer to external symbols
-  -o OUTPUT-FILE    create OUTPUT-FILE from the specified objects
-  -objectlist FILE  Use a list of object files found in FILE to specify objects
-  -precious-files-regex REGEX
-                    don't remove output files matching REGEX
-  -release RELEASE  specify package release information
-  -rpath LIBDIR     the created library will eventually be installed in LIBDIR
-  -R[ ]LIBDIR       add LIBDIR to the runtime path of programs and libraries
-  -static           do not do any dynamic linking of uninstalled libtool libraries
-  -static-libtool-libs
-                    do not do any dynamic linking of libtool libraries
-  -version-info CURRENT[:REVISION[:AGE]]
-                    specify library version info [each variable defaults to 0]
-
-All other options (arguments beginning with \`-') are ignored.
-
-Every other argument is treated as a filename.  Files ending in \`.la' are
-treated as uninstalled libtool libraries, other files are standard or library
-object files.
-
-If the OUTPUT-FILE ends in \`.la', then a libtool library is created,
-only library objects (\`.lo' files) may be specified, and \`-rpath' is
-required, except when creating a convenience library.
-
-If OUTPUT-FILE ends in \`.a' or \`.lib', then a standard library is created
-using \`ar' and \`ranlib', or on Windows using \`lib'.
-
-If OUTPUT-FILE ends in \`.lo' or \`.${objext}', then a reloadable object file
-is created, otherwise an executable program is created."
-  ;;
-
-uninstall)
-  $echo \
-"Usage: $modename [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE...
-
-Remove libraries from an installation directory.
-
-RM is the name of the program to use to delete files associated with each FILE
-(typically \`/bin/rm').  RM-OPTIONS are options (such as \`-f') to be passed
-to RM.
-
-If FILE is a libtool library, all the files associated with it are deleted.
-Otherwise, only FILE itself is deleted using RM."
-  ;;
-
-*)
-  $echo "$modename: invalid operation mode \`$mode'" 1>&2
-  $echo "$help" 1>&2
-  exit $EXIT_FAILURE
-  ;;
-esac
-
-$echo
-$echo "Try \`$modename --help' for more information about other modes."
-
-exit $?
 
 # The TAGs below are defined such that we never get into a situation
 # in which we disable both kinds of libraries.  Given conflicting
@@ -6963,14 +8397,17 @@
 # configuration.  But we'll never go from static-only to shared-only.
 
 # ### BEGIN LIBTOOL TAG CONFIG: disable-shared
-disable_libs=shared
+build_libtool_libs=no
+build_old_libs=yes
 # ### END LIBTOOL TAG CONFIG: disable-shared
 
 # ### BEGIN LIBTOOL TAG CONFIG: disable-static
-disable_libs=static
+build_old_libs=`case $build_libtool_libs in yes) echo no;; *) echo yes;; esac`
 # ### END LIBTOOL TAG CONFIG: disable-static
 
 # Local Variables:
 # mode:shell-script
 # sh-indentation:2
 # End:
+# vi:sw=2
+
--- ode-0.11.orig/ode/Makefile.in
+++ ode-0.11/ode/Makefile.in
@@ -1,8 +1,9 @@
-# Makefile.in generated by automake 1.10.1 from Makefile.am.
+# Makefile.in generated by automake 1.11 from Makefile.am.
 # @configure_input@
 
 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
+# Inc.
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -15,8 +16,9 @@
 @SET_MAKE@
 VPATH = @srcdir@
 pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
 install_sh_DATA = $(install_sh) -c -m 644
 install_sh_PROGRAM = $(install_sh) -c
@@ -41,6 +43,7 @@
 mkinstalldirs = $(install_sh) -d
 CONFIG_HEADER = $(top_builddir)/ode/src/config.h
 CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
 SOURCES =
 DIST_SOURCES =
 RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
@@ -52,10 +55,38 @@
 	ps-recursive uninstall-recursive
 RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
   distclean-recursive maintainer-clean-recursive
+AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
+	$(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
+	distdir
 ETAGS = etags
 CTAGS = ctags
 DIST_SUBDIRS = src demo
 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+am__relativize = \
+  dir0=`pwd`; \
+  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
+  sed_rest='s,^[^/]*/*,,'; \
+  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
+  sed_butlast='s,/*[^/]*$$,,'; \
+  while test -n "$$dir1"; do \
+    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
+    if test "$$first" != "."; then \
+      if test "$$first" = ".."; then \
+        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
+        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
+      else \
+        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
+        if test "$$first2" = "$$first"; then \
+          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
+        else \
+          dir2="../$$dir2"; \
+        fi; \
+        dir0="$$dir0"/"$$first"; \
+      fi; \
+    fi; \
+    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
+  done; \
+  reldir="$$dir2"
 ACLOCAL = @ACLOCAL@
 ALLOCA = @ALLOCA@
 AMTAR = @AMTAR@
@@ -79,15 +110,14 @@
 DEPDIR = @DEPDIR@
 DLLTOOL = @DLLTOOL@
 DSYMUTIL = @DSYMUTIL@
-ECHO = @ECHO@
+DUMPBIN = @DUMPBIN@
 ECHO_C = @ECHO_C@
 ECHO_N = @ECHO_N@
 ECHO_T = @ECHO_T@
 EGREP = @EGREP@
 EXEEXT = @EXEEXT@
 EXTRA_LIBTOOL_LDFLAGS = @EXTRA_LIBTOOL_LDFLAGS@
-F77 = @F77@
-FFLAGS = @FFLAGS@
+FGREP = @FGREP@
 GL_LIBS = @GL_LIBS@
 GREP = @GREP@
 INSTALL = @INSTALL@
@@ -95,26 +125,32 @@
 INSTALL_PROGRAM = @INSTALL_PROGRAM@
 INSTALL_SCRIPT = @INSTALL_SCRIPT@
 INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LD = @LD@
 LDFLAGS = @LDFLAGS@
 LIBOBJS = @LIBOBJS@
 LIBS = @LIBS@
 LIBSTDCXX = @LIBSTDCXX@
 LIBTOOL = @LIBTOOL@
+LIPO = @LIPO@
 LN_S = @LN_S@
 LTLIBOBJS = @LTLIBOBJS@
 MAKEINFO = @MAKEINFO@
 MKDIR_P = @MKDIR_P@
+NM = @NM@
 NMEDIT = @NMEDIT@
 OBJDUMP = @OBJDUMP@
 OBJEXT = @OBJEXT@
 ODE_PRECISION = @ODE_PRECISION@
 ODE_RELEASE = @ODE_RELEASE@
 ODE_VERSION_INFO = @ODE_VERSION_INFO@
+OTOOL = @OTOOL@
+OTOOL64 = @OTOOL64@
 PACKAGE = @PACKAGE@
 PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
 PACKAGE_NAME = @PACKAGE_NAME@
 PACKAGE_STRING = @PACKAGE_STRING@
 PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
 PACKAGE_VERSION = @PACKAGE_VERSION@
 PATH_SEPARATOR = @PATH_SEPARATOR@
 RANLIB = @RANLIB@
@@ -135,7 +171,7 @@
 abs_top_srcdir = @abs_top_srcdir@
 ac_ct_CC = @ac_ct_CC@
 ac_ct_CXX = @ac_ct_CXX@
-ac_ct_F77 = @ac_ct_F77@
+ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
 ac_ct_WINDRES = @ac_ct_WINDRES@
 am__include = @am__include@
 am__leading_dot = @am__leading_dot@
@@ -167,6 +203,7 @@
 libexecdir = @libexecdir@
 localedir = @localedir@
 localstatedir = @localstatedir@
+lt_ECHO = @lt_ECHO@
 mandir = @mandir@
 mkdir_p = @mkdir_p@
 oldincludedir = @oldincludedir@
@@ -192,14 +229,14 @@
 	@for dep in $?; do \
 	  case '$(am__configure_deps)' in \
 	    *$$dep*) \
-	      cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
-		&& exit 0; \
+	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+	        && { if test -f $@; then exit 0; else break; fi; }; \
 	      exit 1;; \
 	  esac; \
 	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign  ode/Makefile'; \
-	cd $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign  ode/Makefile
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign ode/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign ode/Makefile
 .PRECIOUS: Makefile
 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 	@case '$?' in \
@@ -217,6 +254,7 @@
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 $(ACLOCAL_M4):  $(am__aclocal_m4_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
 
 mostlyclean-libtool:
 	-rm -f *.lo
@@ -248,7 +286,7 @@
 	  else \
 	    local_target="$$target"; \
 	  fi; \
-	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
 	  || eval $$failcom; \
 	done; \
 	if test "$$dot_seen" = "no"; then \
@@ -282,16 +320,16 @@
 	  else \
 	    local_target="$$target"; \
 	  fi; \
-	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
 	  || eval $$failcom; \
 	done && test -z "$$fail"
 tags-recursive:
 	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
+	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
 	done
 ctags-recursive:
 	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
+	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
 	done
 
 ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
@@ -299,14 +337,14 @@
 	unique=`for i in $$list; do \
 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 	  done | \
-	  $(AWK) '{ files[$$0] = 1; nonemtpy = 1; } \
+	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
 	mkid -fID $$unique
 tags: TAGS
 
 TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
+	set x; \
 	here=`pwd`; \
 	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
 	  include_option=--etags-include; \
@@ -318,7 +356,7 @@
 	list='$(SUBDIRS)'; for subdir in $$list; do \
 	  if test "$$subdir" = .; then :; else \
 	    test ! -f $$subdir/TAGS || \
-	      tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
+	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
 	  fi; \
 	done; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
@@ -327,29 +365,34 @@
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
 	  test -n "$$unique" || unique=$$empty_fix; \
-	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	    $$tags $$unique; \
+	  if test $$# -gt 0; then \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
 	fi
 ctags: CTAGS
 CTAGS: ctags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	test -z "$(CTAGS_ARGS)$$tags$$unique" \
+	test -z "$(CTAGS_ARGS)$$unique" \
 	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
-	     $$tags $$unique
+	     $$unique
 
 GTAGS:
 	here=`$(am__cd) $(top_builddir) && pwd` \
-	  && cd $(top_srcdir) \
-	  && gtags -i $(GTAGS_ARGS) $$here
+	  && $(am__cd) $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) "$$here"
 
 distclean-tags:
 	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
@@ -370,29 +413,44 @@
 	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
 	  if test -d $$d/$$file; then \
 	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
 	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 	    fi; \
-	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
 	  else \
-	    test -f $(distdir)/$$file \
-	    || cp -p $$d/$$file $(distdir)/$$file \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
 	    || exit 1; \
 	  fi; \
 	done
-	list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
 	  if test "$$subdir" = .; then :; else \
 	    test -d "$(distdir)/$$subdir" \
 	    || $(MKDIR_P) "$(distdir)/$$subdir" \
 	    || exit 1; \
-	    distdir=`$(am__cd) $(distdir) && pwd`; \
-	    top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
-	    (cd $$subdir && \
+	  fi; \
+	done
+	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+	  if test "$$subdir" = .; then :; else \
+	    dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
+	    $(am__relativize); \
+	    new_distdir=$$reldir; \
+	    dir1=$$subdir; dir2="$(top_distdir)"; \
+	    $(am__relativize); \
+	    new_top_distdir=$$reldir; \
+	    echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
+	    echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
+	    ($(am__cd) $$subdir && \
 	      $(MAKE) $(AM_MAKEFLAGS) \
-	        top_distdir="$$top_distdir" \
-	        distdir="$$distdir/$$subdir" \
+	        top_distdir="$$new_top_distdir" \
+	        distdir="$$new_distdir" \
 		am__remove_distdir=: \
 		am__skip_length_check=: \
+		am__skip_mode_fix=: \
 	        distdir) \
 	      || exit 1; \
 	  fi; \
@@ -422,6 +480,7 @@
 
 distclean-generic:
 	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
 
 maintainer-clean-generic:
 	@echo "This command is intended for maintainers to use"
@@ -440,6 +499,8 @@
 
 html: html-recursive
 
+html-am:
+
 info: info-recursive
 
 info-am:
@@ -448,18 +509,28 @@
 
 install-dvi: install-dvi-recursive
 
+install-dvi-am:
+
 install-exec-am:
 
 install-html: install-html-recursive
 
+install-html-am:
+
 install-info: install-info-recursive
 
+install-info-am:
+
 install-man:
 
 install-pdf: install-pdf-recursive
 
+install-pdf-am:
+
 install-ps: install-ps-recursive
 
+install-ps-am:
+
 installcheck-am:
 
 maintainer-clean: maintainer-clean-recursive
@@ -480,8 +551,8 @@
 
 uninstall-am:
 
-.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) install-am \
-	install-strip
+.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) ctags-recursive \
+	install-am install-strip tags-recursive
 
 .PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
 	all all-am check check-am clean clean-generic clean-libtool \
@@ -497,6 +568,7 @@
 	mostlyclean-libtool pdf pdf-am ps ps-am tags tags-recursive \
 	uninstall uninstall-am
 
+
 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 # Otherwise a system limit (for SysV at least) may be exceeded.
 .NOEXPORT:
--- ode-0.11.orig/ode/src/Makefile.in
+++ ode-0.11/ode/src/Makefile.in
@@ -1,8 +1,9 @@
-# Makefile.in generated by automake 1.10.1 from Makefile.am.
+# Makefile.in generated by automake 1.11 from Makefile.am.
 # @configure_input@
 
 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
+# Inc.
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -16,8 +17,9 @@
 
 VPATH = @srcdir@
 pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
 install_sh_DATA = $(install_sh) -c -m 644
 install_sh_PROGRAM = $(install_sh) -c
@@ -88,14 +90,29 @@
 mkinstalldirs = $(install_sh) -d
 CONFIG_HEADER = config.h
 CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
 am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
 am__vpath_adj = case $$p in \
     $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
     *) f=$$p;; \
   esac;
-am__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+  for p in $$list; do echo "$$p $$p"; done | \
+  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+    if (++n[$$2] == $(am__install_max)) \
+      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+    END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
 am__installdirs = "$(DESTDIR)$(libdir)"
-libLTLIBRARIES_INSTALL = $(INSTALL)
 LTLIBRARIES = $(lib_LTLIBRARIES) $(noinst_LTLIBRARIES)
 libfast_la_LIBADD =
 am_libfast_la_OBJECTS = libfast_la-fastldlt.lo \
@@ -168,6 +185,7 @@
 DEFAULT_INCLUDES = -I.@am__isrc@
 depcomp = $(SHELL) $(top_srcdir)/depcomp
 am__depfiles_maybe = depfiles
+am__mv = mv -f
 COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
 	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
 LTCOMPILE = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
@@ -197,10 +215,38 @@
 	ps-recursive uninstall-recursive
 RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
   distclean-recursive maintainer-clean-recursive
+AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
+	$(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
+	distdir
 ETAGS = etags
 CTAGS = ctags
 DIST_SUBDIRS = $(SUBDIRS)
 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+am__relativize = \
+  dir0=`pwd`; \
+  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
+  sed_rest='s,^[^/]*/*,,'; \
+  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
+  sed_butlast='s,/*[^/]*$$,,'; \
+  while test -n "$$dir1"; do \
+    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
+    if test "$$first" != "."; then \
+      if test "$$first" = ".."; then \
+        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
+        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
+      else \
+        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
+        if test "$$first2" = "$$first"; then \
+          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
+        else \
+          dir2="../$$dir2"; \
+        fi; \
+        dir0="$$dir0"/"$$first"; \
+      fi; \
+    fi; \
+    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
+  done; \
+  reldir="$$dir2"
 ACLOCAL = @ACLOCAL@
 ALLOCA = @ALLOCA@
 AMTAR = @AMTAR@
@@ -224,15 +270,14 @@
 DEPDIR = @DEPDIR@
 DLLTOOL = @DLLTOOL@
 DSYMUTIL = @DSYMUTIL@
-ECHO = @ECHO@
+DUMPBIN = @DUMPBIN@
 ECHO_C = @ECHO_C@
 ECHO_N = @ECHO_N@
 ECHO_T = @ECHO_T@
 EGREP = @EGREP@
 EXEEXT = @EXEEXT@
 EXTRA_LIBTOOL_LDFLAGS = @EXTRA_LIBTOOL_LDFLAGS@
-F77 = @F77@
-FFLAGS = @FFLAGS@
+FGREP = @FGREP@
 GL_LIBS = @GL_LIBS@
 GREP = @GREP@
 INSTALL = @INSTALL@
@@ -240,26 +285,32 @@
 INSTALL_PROGRAM = @INSTALL_PROGRAM@
 INSTALL_SCRIPT = @INSTALL_SCRIPT@
 INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LD = @LD@
 LDFLAGS = @LDFLAGS@
 LIBOBJS = @LIBOBJS@
 LIBS = @LIBS@
 LIBSTDCXX = @LIBSTDCXX@
 LIBTOOL = @LIBTOOL@
+LIPO = @LIPO@
 LN_S = @LN_S@
 LTLIBOBJS = @LTLIBOBJS@
 MAKEINFO = @MAKEINFO@
 MKDIR_P = @MKDIR_P@
+NM = @NM@
 NMEDIT = @NMEDIT@
 OBJDUMP = @OBJDUMP@
 OBJEXT = @OBJEXT@
 ODE_PRECISION = @ODE_PRECISION@
 ODE_RELEASE = @ODE_RELEASE@
 ODE_VERSION_INFO = @ODE_VERSION_INFO@
+OTOOL = @OTOOL@
+OTOOL64 = @OTOOL64@
 PACKAGE = @PACKAGE@
 PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
 PACKAGE_NAME = @PACKAGE_NAME@
 PACKAGE_STRING = @PACKAGE_STRING@
 PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
 PACKAGE_VERSION = @PACKAGE_VERSION@
 PATH_SEPARATOR = @PATH_SEPARATOR@
 RANLIB = @RANLIB@
@@ -280,7 +331,7 @@
 abs_top_srcdir = @abs_top_srcdir@
 ac_ct_CC = @ac_ct_CC@
 ac_ct_CXX = @ac_ct_CXX@
-ac_ct_F77 = @ac_ct_F77@
+ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
 ac_ct_WINDRES = @ac_ct_WINDRES@
 am__include = @am__include@
 am__leading_dot = @am__leading_dot@
@@ -312,6 +363,7 @@
 libexecdir = @libexecdir@
 localedir = @localedir@
 localstatedir = @localstatedir@
+lt_ECHO = @lt_ECHO@
 mandir = @mandir@
 mkdir_p = @mkdir_p@
 oldincludedir = @oldincludedir@
@@ -368,14 +420,14 @@
 	@for dep in $?; do \
 	  case '$(am__configure_deps)' in \
 	    *$$dep*) \
-	      cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
-		&& exit 0; \
+	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+	        && { if test -f $@; then exit 0; else break; fi; }; \
 	      exit 1;; \
 	  esac; \
 	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign  ode/src/Makefile'; \
-	cd $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign  ode/src/Makefile
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign ode/src/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign ode/src/Makefile
 .PRECIOUS: Makefile
 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 	@case '$?' in \
@@ -393,6 +445,7 @@
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 $(ACLOCAL_M4):  $(am__aclocal_m4_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
 
 config.h: stamp-h1
 	@if test ! -f $@; then \
@@ -404,7 +457,7 @@
 	@rm -f stamp-h1
 	cd $(top_builddir) && $(SHELL) ./config.status ode/src/config.h
 $(srcdir)/config.h.in:  $(am__configure_deps) 
-	cd $(top_srcdir) && $(AUTOHEADER)
+	($(am__cd) $(top_srcdir) && $(AUTOHEADER))
 	rm -f stamp-h1
 	touch $@
 
@@ -413,20 +466,24 @@
 install-libLTLIBRARIES: $(lib_LTLIBRARIES)
 	@$(NORMAL_INSTALL)
 	test -z "$(libdir)" || $(MKDIR_P) "$(DESTDIR)$(libdir)"
-	@list='$(lib_LTLIBRARIES)'; for p in $$list; do \
+	@list='$(lib_LTLIBRARIES)'; test -n "$(libdir)" || list=; \
+	list2=; for p in $$list; do \
 	  if test -f $$p; then \
-	    f=$(am__strip_dir) \
-	    echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(libLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) '$$p' '$(DESTDIR)$(libdir)/$$f'"; \
-	    $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(libLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) "$$p" "$(DESTDIR)$(libdir)/$$f"; \
+	    list2="$$list2 $$p"; \
 	  else :; fi; \
-	done
+	done; \
+	test -z "$$list2" || { \
+	  echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 '$(DESTDIR)$(libdir)'"; \
+	  $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 "$(DESTDIR)$(libdir)"; \
+	}
 
 uninstall-libLTLIBRARIES:
 	@$(NORMAL_UNINSTALL)
-	@list='$(lib_LTLIBRARIES)'; for p in $$list; do \
-	  p=$(am__strip_dir) \
-	  echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f '$(DESTDIR)$(libdir)/$$p'"; \
-	  $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f "$(DESTDIR)$(libdir)/$$p"; \
+	@list='$(lib_LTLIBRARIES)'; test -n "$(libdir)" || list=; \
+	for p in $$list; do \
+	  $(am__strip_dir) \
+	  echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f '$(DESTDIR)$(libdir)/$$f'"; \
+	  $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f "$(DESTDIR)$(libdir)/$$f"; \
 	done
 
 clean-libLTLIBRARIES:
@@ -515,70 +572,70 @@
 
 .c.o:
 @am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(COMPILE) -c $<
 
 .c.obj:
 @am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(COMPILE) -c `$(CYGPATH_W) '$<'`
 
 .c.lo:
 @am__fastdepCC_TRUE@	$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(LTCOMPILE) -c -o $@ $<
 
 libfast_la-fastldlt.lo: fastldlt.c
-@am__fastdepCC_TRUE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfast_la_CFLAGS) $(CFLAGS) -MT libfast_la-fastldlt.lo -MD -MP -MF $(DEPDIR)/libfast_la-fastldlt.Tpo -c -o libfast_la-fastldlt.lo `test -f 'fastldlt.c' || echo '$(srcdir)/'`fastldlt.c
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/libfast_la-fastldlt.Tpo $(DEPDIR)/libfast_la-fastldlt.Plo
+@am__fastdepCC_TRUE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfast_la_CFLAGS) $(CFLAGS) -MT libfast_la-fastldlt.lo -MD -MP -MF $(DEPDIR)/libfast_la-fastldlt.Tpo -c -o libfast_la-fastldlt.lo `test -f 'fastldlt.c' || echo '$(srcdir)/'`fastldlt.c
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/libfast_la-fastldlt.Tpo $(DEPDIR)/libfast_la-fastldlt.Plo
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='fastldlt.c' object='libfast_la-fastldlt.lo' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfast_la_CFLAGS) $(CFLAGS) -c -o libfast_la-fastldlt.lo `test -f 'fastldlt.c' || echo '$(srcdir)/'`fastldlt.c
+@am__fastdepCC_FALSE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfast_la_CFLAGS) $(CFLAGS) -c -o libfast_la-fastldlt.lo `test -f 'fastldlt.c' || echo '$(srcdir)/'`fastldlt.c
 
 libfast_la-fastltsolve.lo: fastltsolve.c
-@am__fastdepCC_TRUE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfast_la_CFLAGS) $(CFLAGS) -MT libfast_la-fastltsolve.lo -MD -MP -MF $(DEPDIR)/libfast_la-fastltsolve.Tpo -c -o libfast_la-fastltsolve.lo `test -f 'fastltsolve.c' || echo '$(srcdir)/'`fastltsolve.c
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/libfast_la-fastltsolve.Tpo $(DEPDIR)/libfast_la-fastltsolve.Plo
+@am__fastdepCC_TRUE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfast_la_CFLAGS) $(CFLAGS) -MT libfast_la-fastltsolve.lo -MD -MP -MF $(DEPDIR)/libfast_la-fastltsolve.Tpo -c -o libfast_la-fastltsolve.lo `test -f 'fastltsolve.c' || echo '$(srcdir)/'`fastltsolve.c
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/libfast_la-fastltsolve.Tpo $(DEPDIR)/libfast_la-fastltsolve.Plo
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='fastltsolve.c' object='libfast_la-fastltsolve.lo' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfast_la_CFLAGS) $(CFLAGS) -c -o libfast_la-fastltsolve.lo `test -f 'fastltsolve.c' || echo '$(srcdir)/'`fastltsolve.c
+@am__fastdepCC_FALSE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfast_la_CFLAGS) $(CFLAGS) -c -o libfast_la-fastltsolve.lo `test -f 'fastltsolve.c' || echo '$(srcdir)/'`fastltsolve.c
 
 libfast_la-fastdot.lo: fastdot.c
-@am__fastdepCC_TRUE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfast_la_CFLAGS) $(CFLAGS) -MT libfast_la-fastdot.lo -MD -MP -MF $(DEPDIR)/libfast_la-fastdot.Tpo -c -o libfast_la-fastdot.lo `test -f 'fastdot.c' || echo '$(srcdir)/'`fastdot.c
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/libfast_la-fastdot.Tpo $(DEPDIR)/libfast_la-fastdot.Plo
+@am__fastdepCC_TRUE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfast_la_CFLAGS) $(CFLAGS) -MT libfast_la-fastdot.lo -MD -MP -MF $(DEPDIR)/libfast_la-fastdot.Tpo -c -o libfast_la-fastdot.lo `test -f 'fastdot.c' || echo '$(srcdir)/'`fastdot.c
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/libfast_la-fastdot.Tpo $(DEPDIR)/libfast_la-fastdot.Plo
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='fastdot.c' object='libfast_la-fastdot.lo' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfast_la_CFLAGS) $(CFLAGS) -c -o libfast_la-fastdot.lo `test -f 'fastdot.c' || echo '$(srcdir)/'`fastdot.c
+@am__fastdepCC_FALSE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfast_la_CFLAGS) $(CFLAGS) -c -o libfast_la-fastdot.lo `test -f 'fastdot.c' || echo '$(srcdir)/'`fastdot.c
 
 libfast_la-fastlsolve.lo: fastlsolve.c
-@am__fastdepCC_TRUE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfast_la_CFLAGS) $(CFLAGS) -MT libfast_la-fastlsolve.lo -MD -MP -MF $(DEPDIR)/libfast_la-fastlsolve.Tpo -c -o libfast_la-fastlsolve.lo `test -f 'fastlsolve.c' || echo '$(srcdir)/'`fastlsolve.c
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/libfast_la-fastlsolve.Tpo $(DEPDIR)/libfast_la-fastlsolve.Plo
+@am__fastdepCC_TRUE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfast_la_CFLAGS) $(CFLAGS) -MT libfast_la-fastlsolve.lo -MD -MP -MF $(DEPDIR)/libfast_la-fastlsolve.Tpo -c -o libfast_la-fastlsolve.lo `test -f 'fastlsolve.c' || echo '$(srcdir)/'`fastlsolve.c
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/libfast_la-fastlsolve.Tpo $(DEPDIR)/libfast_la-fastlsolve.Plo
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='fastlsolve.c' object='libfast_la-fastlsolve.lo' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfast_la_CFLAGS) $(CFLAGS) -c -o libfast_la-fastlsolve.lo `test -f 'fastlsolve.c' || echo '$(srcdir)/'`fastlsolve.c
+@am__fastdepCC_FALSE@	$(LIBTOOL)  --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(libfast_la_CFLAGS) $(CFLAGS) -c -o libfast_la-fastlsolve.lo `test -f 'fastlsolve.c' || echo '$(srcdir)/'`fastlsolve.c
 
 .cpp.o:
 @am__fastdepCXX_TRUE@	$(CXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCXX_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCXX_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCXX_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCXX_FALSE@	$(CXXCOMPILE) -c -o $@ $<
 
 .cpp.obj:
 @am__fastdepCXX_TRUE@	$(CXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
-@am__fastdepCXX_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCXX_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCXX_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCXX_FALSE@	$(CXXCOMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
 
 .cpp.lo:
 @am__fastdepCXX_TRUE@	$(LTCXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCXX_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
+@am__fastdepCXX_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
 @AMDEP_TRUE@@am__fastdepCXX_FALSE@	source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCXX_FALSE@	$(LTCXXCOMPILE) -c -o $@ $<
@@ -613,7 +670,7 @@
 	  else \
 	    local_target="$$target"; \
 	  fi; \
-	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
 	  || eval $$failcom; \
 	done; \
 	if test "$$dot_seen" = "no"; then \
@@ -647,16 +704,16 @@
 	  else \
 	    local_target="$$target"; \
 	  fi; \
-	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
 	  || eval $$failcom; \
 	done && test -z "$$fail"
 tags-recursive:
 	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
+	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
 	done
 ctags-recursive:
 	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
+	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
 	done
 
 ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
@@ -664,14 +721,14 @@
 	unique=`for i in $$list; do \
 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 	  done | \
-	  $(AWK) '{ files[$$0] = 1; nonemtpy = 1; } \
+	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
 	mkid -fID $$unique
 tags: TAGS
 
 TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
+	set x; \
 	here=`pwd`; \
 	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
 	  include_option=--etags-include; \
@@ -683,7 +740,7 @@
 	list='$(SUBDIRS)'; for subdir in $$list; do \
 	  if test "$$subdir" = .; then :; else \
 	    test ! -f $$subdir/TAGS || \
-	      tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
+	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
 	  fi; \
 	done; \
 	list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
@@ -692,29 +749,34 @@
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
 	  test -n "$$unique" || unique=$$empty_fix; \
-	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	    $$tags $$unique; \
+	  if test $$# -gt 0; then \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
 	fi
 ctags: CTAGS
 CTAGS: ctags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
 	list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	test -z "$(CTAGS_ARGS)$$tags$$unique" \
+	test -z "$(CTAGS_ARGS)$$unique" \
 	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
-	     $$tags $$unique
+	     $$unique
 
 GTAGS:
 	here=`$(am__cd) $(top_builddir) && pwd` \
-	  && cd $(top_srcdir) \
-	  && gtags -i $(GTAGS_ARGS) $$here
+	  && $(am__cd) $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) "$$here"
 
 distclean-tags:
 	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
@@ -735,29 +797,44 @@
 	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
 	  if test -d $$d/$$file; then \
 	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
 	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 	    fi; \
-	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
 	  else \
-	    test -f $(distdir)/$$file \
-	    || cp -p $$d/$$file $(distdir)/$$file \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
 	    || exit 1; \
 	  fi; \
 	done
-	list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
 	  if test "$$subdir" = .; then :; else \
 	    test -d "$(distdir)/$$subdir" \
 	    || $(MKDIR_P) "$(distdir)/$$subdir" \
 	    || exit 1; \
-	    distdir=`$(am__cd) $(distdir) && pwd`; \
-	    top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
-	    (cd $$subdir && \
+	  fi; \
+	done
+	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+	  if test "$$subdir" = .; then :; else \
+	    dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
+	    $(am__relativize); \
+	    new_distdir=$$reldir; \
+	    dir1=$$subdir; dir2="$(top_distdir)"; \
+	    $(am__relativize); \
+	    new_top_distdir=$$reldir; \
+	    echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
+	    echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
+	    ($(am__cd) $$subdir && \
 	      $(MAKE) $(AM_MAKEFLAGS) \
-	        top_distdir="$$top_distdir" \
-	        distdir="$$distdir/$$subdir" \
+	        top_distdir="$$new_top_distdir" \
+	        distdir="$$new_distdir" \
 		am__remove_distdir=: \
 		am__skip_length_check=: \
+		am__skip_mode_fix=: \
 	        distdir) \
 	      || exit 1; \
 	  fi; \
@@ -790,6 +867,7 @@
 
 distclean-generic:
 	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
 
 maintainer-clean-generic:
 	@echo "This command is intended for maintainers to use"
@@ -811,6 +889,8 @@
 
 html: html-recursive
 
+html-am:
+
 info: info-recursive
 
 info-am:
@@ -819,18 +899,28 @@
 
 install-dvi: install-dvi-recursive
 
+install-dvi-am:
+
 install-exec-am: install-libLTLIBRARIES
 
 install-html: install-html-recursive
 
+install-html-am:
+
 install-info: install-info-recursive
 
+install-info-am:
+
 install-man:
 
 install-pdf: install-pdf-recursive
 
+install-pdf-am:
+
 install-ps: install-ps-recursive
 
+install-ps-am:
+
 installcheck-am:
 
 maintainer-clean: maintainer-clean-recursive
@@ -853,8 +943,8 @@
 
 uninstall-am: uninstall-libLTLIBRARIES
 
-.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) install-am \
-	install-strip
+.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) all \
+	ctags-recursive install-am install-strip tags-recursive
 
 .PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
 	all all-am check check-am clean clean-generic \
@@ -873,6 +963,7 @@
 	tags tags-recursive uninstall uninstall-am \
 	uninstall-libLTLIBRARIES
 
+
 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 # Otherwise a system limit (for SysV at least) may be exceeded.
 .NOEXPORT:
--- ode-0.11.orig/ode/src/config.h.in
+++ ode-0.11/ode/src/config.h.in
@@ -187,6 +187,10 @@
 /* Define to 1 if you have the `__isnanf' function. */
 #undef HAVE___ISNANF
 
+/* Define to the sub-directory in which libtool stores uninstalled libraries.
+   */
+#undef LT_OBJDIR
+
 /* Mac OS X version setting for OU Library */
 #undef MAC_OS_X_VERSION
 
@@ -208,6 +212,9 @@
 /* Define to the one symbol short name of this package. */
 #undef PACKAGE_TARNAME
 
+/* Define to the home page for this package. */
+#undef PACKAGE_URL
+
 /* Define to the version of this package. */
 #undef PACKAGE_VERSION
 
--- ode-0.11.orig/ode/src/joints/Makefile.in
+++ ode-0.11/ode/src/joints/Makefile.in
@@ -1,8 +1,9 @@
-# Makefile.in generated by automake 1.10.1 from Makefile.am.
+# Makefile.in generated by automake 1.11 from Makefile.am.
 # @configure_input@
 
 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
+# Inc.
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -16,8 +17,9 @@
 
 VPATH = @srcdir@
 pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
 install_sh_DATA = $(install_sh) -c -m 644
 install_sh_PROGRAM = $(install_sh) -c
@@ -41,6 +43,7 @@
 mkinstalldirs = $(install_sh) -d
 CONFIG_HEADER = $(top_builddir)/ode/src/config.h
 CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
 LTLIBRARIES = $(noinst_LTLIBRARIES)
 libjoints_la_LIBADD =
 am_libjoints_la_OBJECTS = joint.lo ball.lo hinge.lo slider.lo \
@@ -50,6 +53,7 @@
 DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/ode/src
 depcomp = $(SHELL) $(top_srcdir)/depcomp
 am__depfiles_maybe = depfiles
+am__mv = mv -f
 CXXCOMPILE = $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
 	$(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS)
 LTCXXCOMPILE = $(LIBTOOL) --tag=CXX $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
@@ -96,15 +100,14 @@
 DEPDIR = @DEPDIR@
 DLLTOOL = @DLLTOOL@
 DSYMUTIL = @DSYMUTIL@
-ECHO = @ECHO@
+DUMPBIN = @DUMPBIN@
 ECHO_C = @ECHO_C@
 ECHO_N = @ECHO_N@
 ECHO_T = @ECHO_T@
 EGREP = @EGREP@
 EXEEXT = @EXEEXT@
 EXTRA_LIBTOOL_LDFLAGS = @EXTRA_LIBTOOL_LDFLAGS@
-F77 = @F77@
-FFLAGS = @FFLAGS@
+FGREP = @FGREP@
 GL_LIBS = @GL_LIBS@
 GREP = @GREP@
 INSTALL = @INSTALL@
@@ -112,26 +115,32 @@
 INSTALL_PROGRAM = @INSTALL_PROGRAM@
 INSTALL_SCRIPT = @INSTALL_SCRIPT@
 INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LD = @LD@
 LDFLAGS = @LDFLAGS@
 LIBOBJS = @LIBOBJS@
 LIBS = @LIBS@
 LIBSTDCXX = @LIBSTDCXX@
 LIBTOOL = @LIBTOOL@
+LIPO = @LIPO@
 LN_S = @LN_S@
 LTLIBOBJS = @LTLIBOBJS@
 MAKEINFO = @MAKEINFO@
 MKDIR_P = @MKDIR_P@
+NM = @NM@
 NMEDIT = @NMEDIT@
 OBJDUMP = @OBJDUMP@
 OBJEXT = @OBJEXT@
 ODE_PRECISION = @ODE_PRECISION@
 ODE_RELEASE = @ODE_RELEASE@
 ODE_VERSION_INFO = @ODE_VERSION_INFO@
+OTOOL = @OTOOL@
+OTOOL64 = @OTOOL64@
 PACKAGE = @PACKAGE@
 PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
 PACKAGE_NAME = @PACKAGE_NAME@
 PACKAGE_STRING = @PACKAGE_STRING@
 PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
 PACKAGE_VERSION = @PACKAGE_VERSION@
 PATH_SEPARATOR = @PATH_SEPARATOR@
 RANLIB = @RANLIB@
@@ -152,7 +161,7 @@
 abs_top_srcdir = @abs_top_srcdir@
 ac_ct_CC = @ac_ct_CC@
 ac_ct_CXX = @ac_ct_CXX@
-ac_ct_F77 = @ac_ct_F77@
+ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
 ac_ct_WINDRES = @ac_ct_WINDRES@
 am__include = @am__include@
 am__leading_dot = @am__leading_dot@
@@ -184,6 +193,7 @@
 libexecdir = @libexecdir@
 localedir = @localedir@
 localstatedir = @localstatedir@
+lt_ECHO = @lt_ECHO@
 mandir = @mandir@
 mkdir_p = @mkdir_p@
 oldincludedir = @oldincludedir@
@@ -228,14 +238,14 @@
 	@for dep in $?; do \
 	  case '$(am__configure_deps)' in \
 	    *$$dep*) \
-	      cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
-		&& exit 0; \
+	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+	        && { if test -f $@; then exit 0; else break; fi; }; \
 	      exit 1;; \
 	  esac; \
 	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign  ode/src/joints/Makefile'; \
-	cd $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign  ode/src/joints/Makefile
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign ode/src/joints/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign ode/src/joints/Makefile
 .PRECIOUS: Makefile
 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 	@case '$?' in \
@@ -253,6 +263,7 @@
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 $(ACLOCAL_M4):  $(am__aclocal_m4_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
 
 clean-noinstLTLIBRARIES:
 	-test -z "$(noinst_LTLIBRARIES)" || rm -f $(noinst_LTLIBRARIES)
@@ -289,21 +300,21 @@
 
 .cpp.o:
 @am__fastdepCXX_TRUE@	$(CXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCXX_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCXX_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCXX_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCXX_FALSE@	$(CXXCOMPILE) -c -o $@ $<
 
 .cpp.obj:
 @am__fastdepCXX_TRUE@	$(CXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
-@am__fastdepCXX_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCXX_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCXX_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCXX_FALSE@	$(CXXCOMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
 
 .cpp.lo:
 @am__fastdepCXX_TRUE@	$(LTCXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCXX_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
+@am__fastdepCXX_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
 @AMDEP_TRUE@@am__fastdepCXX_FALSE@	source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCXX_FALSE@	$(LTCXXCOMPILE) -c -o $@ $<
@@ -319,14 +330,14 @@
 	unique=`for i in $$list; do \
 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 	  done | \
-	  $(AWK) '{ files[$$0] = 1; nonemtpy = 1; } \
+	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
 	mkid -fID $$unique
 tags: TAGS
 
 TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
+	set x; \
 	here=`pwd`; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
@@ -334,29 +345,34 @@
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
 	  test -n "$$unique" || unique=$$empty_fix; \
-	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	    $$tags $$unique; \
+	  if test $$# -gt 0; then \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
 	fi
 ctags: CTAGS
 CTAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	test -z "$(CTAGS_ARGS)$$tags$$unique" \
+	test -z "$(CTAGS_ARGS)$$unique" \
 	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
-	     $$tags $$unique
+	     $$unique
 
 GTAGS:
 	here=`$(am__cd) $(top_builddir) && pwd` \
-	  && cd $(top_srcdir) \
-	  && gtags -i $(GTAGS_ARGS) $$here
+	  && $(am__cd) $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) "$$here"
 
 distclean-tags:
 	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
@@ -377,13 +393,17 @@
 	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
 	  if test -d $$d/$$file; then \
 	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
 	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 	    fi; \
-	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
 	  else \
-	    test -f $(distdir)/$$file \
-	    || cp -p $$d/$$file $(distdir)/$$file \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
 	    || exit 1; \
 	  fi; \
 	done
@@ -411,6 +431,7 @@
 
 distclean-generic:
 	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
 
 maintainer-clean-generic:
 	@echo "This command is intended for maintainers to use"
@@ -432,6 +453,8 @@
 
 html: html-am
 
+html-am:
+
 info: info-am
 
 info-am:
@@ -440,18 +463,28 @@
 
 install-dvi: install-dvi-am
 
+install-dvi-am:
+
 install-exec-am:
 
 install-html: install-html-am
 
+install-html-am:
+
 install-info: install-info-am
 
+install-info-am:
+
 install-man:
 
 install-pdf: install-pdf-am
 
+install-pdf-am:
+
 install-ps: install-ps-am
 
+install-ps-am:
+
 installcheck-am:
 
 maintainer-clean: maintainer-clean-am
@@ -489,6 +522,7 @@
 	mostlyclean-compile mostlyclean-generic mostlyclean-libtool \
 	pdf pdf-am ps ps-am tags uninstall uninstall-am
 
+
 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 # Otherwise a system limit (for SysV at least) may be exceeded.
 .NOEXPORT:
--- ode-0.11.orig/ode/demo/Makefile.in
+++ ode-0.11/ode/demo/Makefile.in
@@ -1,8 +1,9 @@
-# Makefile.in generated by automake 1.10.1 from Makefile.am.
+# Makefile.in generated by automake 1.11 from Makefile.am.
 # @configure_input@
 
 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
+# Inc.
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -17,8 +18,9 @@
 
 VPATH = @srcdir@
 pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
 install_sh_DATA = $(install_sh) -c -m 644
 install_sh_PROGRAM = $(install_sh) -c
@@ -64,6 +66,7 @@
 mkinstalldirs = $(install_sh) -d
 CONFIG_HEADER = $(top_builddir)/ode/src/config.h
 CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
 @TRIMESH_TRUE@am__EXEEXT_1 = demo_basket$(EXEEXT) demo_cyl$(EXEEXT) \
 @TRIMESH_TRUE@	demo_moving_trimesh$(EXEEXT) \
 @TRIMESH_TRUE@	demo_moving_convex$(EXEEXT) \
@@ -264,6 +267,7 @@
 DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/ode/src
 depcomp = $(SHELL) $(top_srcdir)/depcomp
 am__depfiles_maybe = depfiles
+am__mv = mv -f
 COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
 	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
 LTCOMPILE = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
@@ -342,15 +346,14 @@
 DEPDIR = @DEPDIR@
 DLLTOOL = @DLLTOOL@
 DSYMUTIL = @DSYMUTIL@
-ECHO = @ECHO@
+DUMPBIN = @DUMPBIN@
 ECHO_C = @ECHO_C@
 ECHO_N = @ECHO_N@
 ECHO_T = @ECHO_T@
 EGREP = @EGREP@
 EXEEXT = @EXEEXT@
 EXTRA_LIBTOOL_LDFLAGS = @EXTRA_LIBTOOL_LDFLAGS@
-F77 = @F77@
-FFLAGS = @FFLAGS@
+FGREP = @FGREP@
 GL_LIBS = @GL_LIBS@
 GREP = @GREP@
 INSTALL = @INSTALL@
@@ -358,26 +361,32 @@
 INSTALL_PROGRAM = @INSTALL_PROGRAM@
 INSTALL_SCRIPT = @INSTALL_SCRIPT@
 INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LD = @LD@
 LDFLAGS = @LDFLAGS@
 LIBOBJS = @LIBOBJS@
 LIBS = @LIBS@
 LIBSTDCXX = @LIBSTDCXX@
 LIBTOOL = @LIBTOOL@
+LIPO = @LIPO@
 LN_S = @LN_S@
 LTLIBOBJS = @LTLIBOBJS@
 MAKEINFO = @MAKEINFO@
 MKDIR_P = @MKDIR_P@
+NM = @NM@
 NMEDIT = @NMEDIT@
 OBJDUMP = @OBJDUMP@
 OBJEXT = @OBJEXT@
 ODE_PRECISION = @ODE_PRECISION@
 ODE_RELEASE = @ODE_RELEASE@
 ODE_VERSION_INFO = @ODE_VERSION_INFO@
+OTOOL = @OTOOL@
+OTOOL64 = @OTOOL64@
 PACKAGE = @PACKAGE@
 PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
 PACKAGE_NAME = @PACKAGE_NAME@
 PACKAGE_STRING = @PACKAGE_STRING@
 PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
 PACKAGE_VERSION = @PACKAGE_VERSION@
 PATH_SEPARATOR = @PATH_SEPARATOR@
 RANLIB = @RANLIB@
@@ -398,7 +407,7 @@
 abs_top_srcdir = @abs_top_srcdir@
 ac_ct_CC = @ac_ct_CC@
 ac_ct_CXX = @ac_ct_CXX@
-ac_ct_F77 = @ac_ct_F77@
+ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
 ac_ct_WINDRES = @ac_ct_WINDRES@
 am__include = @am__include@
 am__leading_dot = @am__leading_dot@
@@ -430,6 +439,7 @@
 libexecdir = @libexecdir@
 localedir = @localedir@
 localstatedir = @localstatedir@
+lt_ECHO = @lt_ECHO@
 mandir = @mandir@
 mkdir_p = @mkdir_p@
 oldincludedir = @oldincludedir@
@@ -497,14 +507,14 @@
 	@for dep in $?; do \
 	  case '$(am__configure_deps)' in \
 	    *$$dep*) \
-	      cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
-		&& exit 0; \
+	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+	        && { if test -f $@; then exit 0; else break; fi; }; \
 	      exit 1;; \
 	  esac; \
 	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign  ode/demo/Makefile'; \
-	cd $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign  ode/demo/Makefile
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign ode/demo/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign ode/demo/Makefile
 .PRECIOUS: Makefile
 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 	@case '$?' in \
@@ -522,13 +532,16 @@
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 $(ACLOCAL_M4):  $(am__aclocal_m4_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
 
 clean-noinstPROGRAMS:
-	@list='$(noinst_PROGRAMS)'; for p in $$list; do \
-	  f=`echo $$p|sed 's/$(EXEEXT)$$//'`; \
-	  echo " rm -f $$p $$f"; \
-	  rm -f $$p $$f ; \
-	done
+	@list='$(noinst_PROGRAMS)'; test -n "$$list" || exit 0; \
+	echo " rm -f" $$list; \
+	rm -f $$list || exit $$?; \
+	test -n "$(EXEEXT)" || exit 0; \
+	list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
+	echo " rm -f" $$list; \
+	rm -f $$list
 demo_I$(EXEEXT): $(demo_I_OBJECTS) $(demo_I_DEPENDENCIES) 
 	@rm -f demo_I$(EXEEXT)
 	$(CXXLINK) $(demo_I_OBJECTS) $(demo_I_LDADD) $(LIBS)
@@ -667,42 +680,42 @@
 
 .c.o:
 @am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(COMPILE) -c $<
 
 .c.obj:
 @am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(COMPILE) -c `$(CYGPATH_W) '$<'`
 
 .c.lo:
 @am__fastdepCC_TRUE@	$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(LTCOMPILE) -c -o $@ $<
 
 .cpp.o:
 @am__fastdepCXX_TRUE@	$(CXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCXX_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCXX_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCXX_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCXX_FALSE@	$(CXXCOMPILE) -c -o $@ $<
 
 .cpp.obj:
 @am__fastdepCXX_TRUE@	$(CXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
-@am__fastdepCXX_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCXX_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCXX_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCXX_FALSE@	$(CXXCOMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
 
 .cpp.lo:
 @am__fastdepCXX_TRUE@	$(LTCXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCXX_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
+@am__fastdepCXX_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
 @AMDEP_TRUE@@am__fastdepCXX_FALSE@	source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCXX_FALSE@	$(LTCXXCOMPILE) -c -o $@ $<
@@ -718,14 +731,14 @@
 	unique=`for i in $$list; do \
 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 	  done | \
-	  $(AWK) '{ files[$$0] = 1; nonemtpy = 1; } \
+	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
 	mkid -fID $$unique
 tags: TAGS
 
 TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
+	set x; \
 	here=`pwd`; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
@@ -733,29 +746,34 @@
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
 	  test -n "$$unique" || unique=$$empty_fix; \
-	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	    $$tags $$unique; \
+	  if test $$# -gt 0; then \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
 	fi
 ctags: CTAGS
 CTAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	test -z "$(CTAGS_ARGS)$$tags$$unique" \
+	test -z "$(CTAGS_ARGS)$$unique" \
 	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
-	     $$tags $$unique
+	     $$unique
 
 GTAGS:
 	here=`$(am__cd) $(top_builddir) && pwd` \
-	  && cd $(top_srcdir) \
-	  && gtags -i $(GTAGS_ARGS) $$here
+	  && $(am__cd) $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) "$$here"
 
 distclean-tags:
 	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
@@ -776,13 +794,17 @@
 	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
 	  if test -d $$d/$$file; then \
 	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
 	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 	    fi; \
-	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
 	  else \
-	    test -f $(distdir)/$$file \
-	    || cp -p $$d/$$file $(distdir)/$$file \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
 	    || exit 1; \
 	  fi; \
 	done
@@ -810,6 +832,7 @@
 
 distclean-generic:
 	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
 
 maintainer-clean-generic:
 	@echo "This command is intended for maintainers to use"
@@ -831,6 +854,8 @@
 
 html: html-am
 
+html-am:
+
 info: info-am
 
 info-am:
@@ -839,18 +864,28 @@
 
 install-dvi: install-dvi-am
 
+install-dvi-am:
+
 install-exec-am:
 
 install-html: install-html-am
 
+install-html-am:
+
 install-info: install-info-am
 
+install-info-am:
+
 install-man:
 
 install-pdf: install-pdf-am
 
+install-pdf-am:
+
 install-ps: install-ps-am
 
+install-ps-am:
+
 installcheck-am:
 
 maintainer-clean: maintainer-clean-am
@@ -891,6 +926,7 @@
 
 @WIN32_TRUE@resources.o: $(top_srcdir)/drawstuff/src/resources.rc $(top_srcdir)/drawstuff/src/resource.h
 @WIN32_TRUE@	@WINDRES@ $(top_srcdir)/drawstuff/src/resources.rc -o resources.o
+
 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 # Otherwise a system limit (for SysV at least) may be exceeded.
 .NOEXPORT:
--- ode-0.11.orig/debian/docs
+++ ode-0.11/debian/docs
@@ -0,0 +1 @@
+README.txt
--- ode-0.11.orig/debian/rules
+++ ode-0.11/debian/rules
@@ -0,0 +1,142 @@
+#!/usr/bin/make -f
+# Sample debian/rules that uses debhelper.
+# GNU copyright 1997 to 1999 by Joey Hess.
+
+# Uncomment this to turn on verbose mode.
+#export DH_VERBOSE=1
+# This is the debhelper compatibility version to use.
+ifneq (,$(findstring noopt,$(DEB_BUILD_OPTIONS)))
+	CXXFLAGS += -O0 -g3
+	CFLAGS += -O0 -g3
+	export CXXFLAGS CFLAGS
+endif
+
+# shared library versions, option 1
+#version=2.0.5
+#major=2
+# option 2, assuming the library is created as src/.libs/libfoo.so.2.0.5 or so
+#version=`ls src/.libs/lib*.so.* | \
+# awk '{if (match($$0,/[0-9]+\.[0-9]+\.[0-9]+$$/)) print substr($$0,RSTART)}'`
+#major=`ls src/.libs/lib*.so.* | \
+# awk '{if (match($$0,/\.so\.[0-9]+$$/)) print substr($$0,RSTART+4)}'`
+
+configure: configure-stamp
+configure-stamp:
+	dh_testdir
+	QUILT_PATCHES=debian/patches quilt push -a || test $$? = 2	
+	./configure --enable-shared --prefix=/usr #--enable-double-precision
+	
+	touch configure-stamp
+
+
+build: build-stamp
+build-stamp: configure-stamp 
+	dh_testdir
+
+	$(MAKE)
+
+	touch build-stamp
+
+clean:
+	dh_testdir
+	dh_testroot
+	rm -f build-stamp \
+	    configure-stamp
+	
+	# Add here commands to clean up after the build process.
+	[ ! -f Makefile ] || $(MAKE) clean
+	QUILT_PATCHES=debian/patches quilt pop -a -R || test $$? = 2
+	find -name '.deps' -type d -exec rm -Rf {} \;
+	rm -Rf .pc
+	rm -f ode-config \
+		confdefs.h \
+		config.log \
+		conftest.dir/confmf \
+		drawstuff/Makefile \
+		drawstuff/dstest/Makefile \
+		drawstuff/src/Makefile \
+		include/Makefile \
+		include/ode/Makefile \
+		ode/Makefile \
+		ode/src/Makefile \
+		config.status \
+		Makefile \
+		GIMPACT/Makefile \
+		GIMPACT/include/GIMPACT/Makefile \
+		GIMPACT/include/Makefile \
+		GIMPACT/src/Makefile \
+		OPCODE/Ice/Makefile \
+		OPCODE/Makefile \
+		include/drawstuff/Makefile \
+		libtool \
+		ode/demo/Makefile \
+		ode/src/config.h \
+		ode/src/joints/Makefile \
+		ode/src/stamp-h1 \
+		ou/Makefile \
+		ou/config.log \
+		ou/config.status \
+		ou/include/ou/Makefile \
+		ou/libtool \
+		ou/src/ou/Makefile \
+		ou/test/Makefile \
+		tests/Makefile \
+		tests/UnitTest++/Makefile \
+		tests/UnitTest++/src/Makefile \
+		tests/UnitTest++/src/Posix/Makefile \
+		conftest.dir/sub/conftest.Po \
+		conftest.dir/sub/conftest.c \
+		conftest.dir/sub/conftst1.h \
+		conftest.dir/sub/conftst2.h \
+		conftest.dir/sub/conftst3.h \
+		conftest.dir/sub/conftst4.h \
+		conftest.dir/sub/conftst5.h \
+		conftest.dir/sub/conftst6.h
+	dh_clean
+
+install: build
+	dh_testdir
+	dh_testroot
+	dh_clean -k
+	dh_installdirs
+
+	# Add here commands to install the package into debian/tmp
+	$(MAKE) install DESTDIR=$(CURDIR)/debian/tmp
+	docbook-to-man debian/ode-config.man.sgml > \
+	debian/ode-config.1
+
+# Build architecture-independent files here.
+binary-indep:
+	dh_testdir -i
+	dh_testroot -i
+	dh_installdocs -i
+	dh_install -i
+	dh_installchangelogs -i CHANGELOG.txt
+	dh_compress -i
+	dh_fixperms -i
+	dh_installdeb -i
+	dh_gencontrol -i
+	dh_md5sums -i
+	dh_builddeb -i
+
+# Build architecture-dependent files here.
+binary-arch: build install
+	dh_testdir -a
+	dh_testroot -a
+	dh_installdocs -a
+	dh_installman -plibode-dev debian/ode-config.1
+	dh_install -a
+	dh_installchangelogs -a CHANGELOG.txt
+	dh_link -a
+	dh_strip -a
+	dh_compress -a
+	dh_fixperms -a
+	dh_makeshlibs -a
+	dh_shlibdeps -a
+	dh_installdeb -a
+	dh_gencontrol -a
+	dh_md5sums -a
+	dh_builddeb -a
+
+binary: binary-indep binary-arch
+.PHONY: build clean binary-indep binary-arch binary install configure
--- ode-0.11.orig/debian/libode-dev.links
+++ ode-0.11/debian/libode-dev.links
@@ -0,0 +1 @@
+usr/lib/libode.so.1.1.0 usr/lib/libode.so 
--- ode-0.11.orig/debian/ode-config.man.sgml
+++ ode-0.11/debian/ode-config.man.sgml
@@ -0,0 +1,174 @@
+<!doctype refentry PUBLIC "-//OASIS//DTD DocBook V4.1//EN" [
+
+<!-- Process this file with docbook-to-man to generate an nroff manual
+     page: `docbook-to-man manpage.sgml > manpage.1'.  You may view
+     the manual page with: `docbook-to-man manpage.sgml | nroff -man |
+     less'.  A typical entry in a Makefile or Makefile.am is:
+
+manpage.1: manpage.sgml
+	docbook-to-man $< > $@
+
+    
+	The docbook-to-man binary is found in the docbook-to-man package.
+	Please remember that if you create the nroff version in one of the
+	debian/rules file targets (such as build), you will need to include
+	docbook-to-man in your Build-Depends control field.
+
+  -->
+
+  <!ENTITY dhfirstname "<firstname>Goneri</firstname>">
+  <!ENTITY dhsurname   "<surname>Le Bouder</surname>">
+  <!ENTITY dhdate      "<date>2006-09-09</date>">
+  <!ENTITY dhsection   "<manvolnum>1</manvolnum>">
+  <!ENTITY dhemail     "<email>goneri@rulezlan.org</email>">
+  <!ENTITY dhusername  "Goneri Le Bouder">
+  <!ENTITY dhucpackage "<refentrytitle>LIBODE-DEV</refentrytitle>">
+  <!ENTITY dhpackage   "libode-dev">
+
+  <!ENTITY debian      "<productname>Debian</productname>">
+  <!ENTITY gnu         "<acronym>GNU</acronym>">
+]>
+
+<refentry>
+  <refentryinfo>
+    <address>
+      &dhemail;
+    </address>
+    <author>
+      &dhfirstname;
+      &dhsurname;
+    </author>
+    <copyright>
+      <year>2006</year>
+      <holder>&dhusername;</holder>
+    </copyright>
+    &dhdate;
+  </refentryinfo>
+  <refmeta>
+    &dhucpackage;
+
+    &dhsection;
+  </refmeta>
+  <refnamediv>
+    <refname>&dhpackage;</refname>
+
+    <refpurpose>show information about installed ode libraries</refpurpose>
+  </refnamediv>
+  <refsynopsisdiv>
+    <cmdsynopsis>
+      <command>&dhpackage;</command>
+       <arg><option>--prefix</option></arg>
+       <arg><option>--prefix=PREFIX</option></arg>
+       <arg><option>--exec-prefix</option></arg>
+       <arg><option>--exec-prefix=EPREFIX</option></arg>
+       <arg><option>--version</option></arg>
+       <arg><option>--ftversion</option></arg>
+       <arg><option>--libs</option></arg>
+       <arg><option>--libtool</option></arg>
+       <arg><option>--cflags</option></arg>
+    </cmdsynopsis>
+  </refsynopsisdiv>
+  <refsect1>
+    <title>DESCRIPTION</title>
+
+    <para>This manual page documents briefly the
+      <command>&dhpackage;</command> command,</para>
+
+    <para><command>&dhpackage;</command> is a program that shows information
+      about the installed ode libraries.</para>
+
+  </refsect1>
+  <refsect1>
+    <title>OPTIONS</title>
+
+    <para>The following options are supported:</para>
+
+    <variablelist>
+      <varlistentry>
+        <term><option>--prefix</option>
+	<option>--prefix=PREFIX</option>
+        </term>
+        <listitem>
+          <para>Show the prefix ode was built with. The prefix may
+           be overridden by passing the argument PREFIX.</para>
+        </listitem>
+      </varlistentry>
+      <varlistentry>
+        <term><option>--exec-prefix</option>
+	<option>--exec-prefix=EPREFIX</option>
+        </term>
+        <listitem>
+          <para>Show the executable prefix ode was built with. The 
+           executable prefix may be overridden by passing the argument
+           EPREFIX.</para>
+        </listitem>
+      </varlistentry>
+      <varlistentry>
+        <term><option>--version</option>
+        </term>
+        <listitem>
+          <para>Show the libtool version of the installed ode.</para>
+        </listitem>
+      </varlistentry>
+      <varlistentry>
+        <term><option>--ftversion</option>
+        </term>
+        <listitem>
+          <para>Show the FreeType version of the installed ode.</para>
+        </listitem>
+      </varlistentry>
+      <varlistentry>
+        <term><option>--libs</option>
+        </term>
+        <listitem>
+          <para>Show the compiler flags for linking to the installed ode.</para>
+        </listitem>
+      </varlistentry>
+      <varlistentry>
+        <term><option>--libtool</option>
+        </term>
+        <listitem>
+          <para>Show the library name for linking with libtool.</para>
+        </listitem>
+      </varlistentry>
+      <varlistentry>
+        <term><option>--cflags</option>
+        </term>
+        <listitem>
+          <para>Show the compiler flags for compiling against the installed ode.</para>
+        </listitem>
+      </varlistentry>
+    </variablelist>
+  </refsect1>
+  <refsect1>
+    <title>AUTHOR</title>
+
+    <para>This manual page was written by &dhusername; &dhemail; for
+      the &debian; system (but may be used by others).  Permission is
+      granted to copy, distribute and/or modify this document under
+      the terms of the <acronym>GNU</acronym> Free Documentation
+      License, Version 1.1 or any later version published by the Free
+      Software Foundation; with no Invariant Sections, no Front-Cover
+      Texts and no Back-Cover Texts.</para>
+
+  </refsect1>
+</refentry>
+
+<!-- Keep this comment at the end of the file
+Local variables:
+mode: sgml
+sgml-omittag:t
+sgml-shorttag:t
+sgml-minimize-attributes:nil
+sgml-always-quote-attributes:t
+sgml-indent-step:2
+sgml-indent-data:t
+sgml-parent-document:nil
+sgml-default-dtd-file:nil
+sgml-exposed-tags:nil
+sgml-local-catalogs:nil
+sgml-local-ecat-files:nil
+End:
+-->
+
+
--- ode-0.11.orig/debian/libode1.links
+++ ode-0.11/debian/libode1.links
@@ -0,0 +1 @@
+usr/lib/libode.so.1.1.0 usr/lib/libode.so.1
--- ode-0.11.orig/debian/README.Debian
+++ ode-0.11/debian/README.Debian
@@ -0,0 +1,7 @@
+ode (1:0.8.dfsg-3) unstable; urgency=low
+
+  Debian libode use configured to use GIMPACT instead of OPCODE of legal reason.
+
+  Double precision is not yet supported for GIMPACT
+
+  Gonéri Le Bouder <goneri@rulezlan.org>  Fri, 29 Jun 2007 14:07:25 +0200
--- ode-0.11.orig/debian/copyright
+++ ode-0.11/debian/copyright
@@ -0,0 +1,66 @@
+This package was debianized by Guus Sliepen <guus@debian.org> on
+Sun,  9 Feb 2003 12:23:52 +0100.
+
+The actual maintainer is the Debian Games Team:
+http://wiki.debian.org/Games/Development
+
+It was downloaded from http://www.ode.org/
+
+Upstream Author: Russel Smith <russ@q12.org>
+
+Copyright:
+
+Either LGPL 2.1 (see /usr/share/common-licenses/LGPL-2.1) or the following
+license, at your choice:
+
+This is the BSD-style license for the Open Dynamics Engine
+----------------------------------------------------------
+
+Open Dynamics Engine
+Copyright (c) 2001-2007, Russell L. Smith.
+All rights reserved.
+
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions
+are met:
+
+Redistributions of source code must retain the above copyright notice,
+this list of conditions and the following disclaimer.
+
+Redistributions in binary form must reproduce the above copyright notice,
+this list of conditions and the following disclaimer in the documentation
+and/or other materials provided with the distribution.
+
+Neither the names of ODE's copyright owner nor the names of its
+contributors may be used to endorse or promote products derived from
+this software without specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+"AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
+TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+The GIMPACT directory:
+Copyright  (c) 2006 , Francisco León.
+
+It's covered by the same licenses than ODE itself.
+
+the OPCODE directory is covered by this license:
+You’re free to use them in any commercial or non-commercial program.
+Copyright  2001-2003 Pierre Terdiman
+
+Another clause found in http://www.codercorner.com/OpcodeUserManual.pdf makes the license
+DFSG free:
+Q: Am I allowed to use OPCODE in a commercial program ?
+A: Yes. The library is free. No GPL or LGPL, you can do whatever you want with the code. I
+would appreciate it if you write somewhere in your product that you're using OPCODE, but
+that's not mandatory. I would also appreciate a notification by mail, just to know how people
+are using the lib.
+
--- ode-0.11.orig/debian/compat
+++ ode-0.11/debian/compat
@@ -0,0 +1 @@
+5
--- ode-0.11.orig/debian/libode1.install
+++ ode-0.11/debian/libode1.install
@@ -0,0 +1 @@
+debian/tmp/usr/lib/lib*.so.*
--- ode-0.11.orig/debian/control
+++ ode-0.11/debian/control
@@ -0,0 +1,43 @@
+Source: ode
+Section: devel
+Priority: optional
+Maintainer: Debian Games Team <pkg-games-devel@lists.alioth.debian.org>
+Uploaders: Hossein Ansari <hossein.ansari@gmail.com>, Armin Ildermi <aildermi@gmail.com>
+Build-Depends: debhelper (>> 5.0.0), quilt, docbook-to-man,
+ libglu1-mesa-dev | libglu-dev, libgl1-mesa-dev | libgl-dev
+Standards-Version: 3.8.0
+Vcs-Svn: svn://svn.debian.org/svn/pkg-games/packages/trunk/ode/
+Vcs-Browser: http://svn.debian.org/wsvn/pkg-games/packages/trunk/ode/?op=log
+Homepage: http://www.ode.org/
+
+Package: libode1
+Section: libs
+Architecture: any
+Depends: ${shlibs:Depends}, ${misc:Depends}
+Conflicts: libode0c2
+Replaces: libode0c2
+Description: Open Dynamics Engine - runtime library
+ ODE is a free, industrial quality library for simulating articulated rigid
+ body dynamics - for example ground vehicles, legged creatures, and moving
+ objects in VR environments. It is fast, flexible, robust and platform
+ independent, with advanced joints, contact with friction, and built-in
+ collision detection.
+ .
+ This package provides the shared libraries.
+
+Package: libode-dev
+Section: libdevel
+Architecture: any
+Depends: libode1 (= ${binary:Version}), ${shlibs:Depends}, ${misc:Depends}
+Conflicts: ode-dev, libode0-dev
+Replaces: ode-dev, libode0-dev
+Provides: libode0-dev
+Description: Open Dynamics Engine - development files
+ ODE is a free, industrial quality library for simulating articulated rigid
+ body dynamics - for example ground vehicles, legged creatures, and moving
+ objects in VR environments. It is fast, flexible, robust and platform
+ independent, with advanced joints, contact with friction, and built-in
+ collision detection.
+ .
+ This package provides the header files and static libraries.
+
--- ode-0.11.orig/debian/changelog
+++ ode-0.11/debian/changelog
@@ -0,0 +1,224 @@
+ode (3:0.11-5karmic) karmic; urgency=low
+
+  * Single Precision enabled 
+
+ -- Hossein Ansari <hossein.ansari@gmail.com>  Tue, 19 Jan 2010 11:26:11 +0330
+
+ode (2:0.11-4) unstable; urgency=low
+
+  * Upload to unstable 
+
+ -- Gonéri Le Bouder <goneri@rulezlan.org>  Sun, 15 Mar 2009 15:19:05 +0100
+
+ode (2:0.11-3) experimental; urgency=low
+
+  * libode-dev provides libode0-dev 
+
+ -- Gonéri Le Bouder <goneri@rulezlan.org>  Mon, 16 Feb 2009 00:14:13 +0100
+
+ode (2:0.11-2) experimental; urgency=low
+
+  * libode-dev conflicts against libode0-dev, thanks Vincent Bernat 
+
+ -- Gonéri Le Bouder <goneri@rulezlan.org>  Sun, 15 Feb 2009 23:29:17 +0100
+
+ode (2:0.11-1) experimental; urgency=low
+
+  * New upstream release 
+  * debian/rules: clean up
+
+ -- Gonéri Le Bouder <goneri@rulezlan.org>  Sun, 15 Feb 2009 00:36:34 +0100
+
+ode (2:0.10.1-1) experimental; urgency=low
+
+  * new upstream release 
+   - remove fix_makeinstall.diff, useless now 
+  * remove libode-doc package, the documentation is not provided with
+    the sources anymore
+  * calls dh_makeshlibs before dh_shlibdeps
+  * adjust the rules file
+  * upstream bumped the soversion
+   - adjust the rules
+   - rename libode0debian1 to libode1 and libode0-dev to libode-dev
+   - drop change_soname.patch
+  * standard version 3.8.0
+  * enable double precision
+
+ -- Gonéri Le Bouder <goneri@rulezlan.org>  Mon, 08 Dec 2008 00:15:02 +0100
+
+ode (2:0.9-1) unstable; urgency=low
+
+  * use the original ode tarball since, thanks to Hans de Goede who pointed
+    out a clause in OPCODE FAQ that make it dfsg OK
+    (Closes: #440484, #465464, #431058)
+  * update the copyright file
+  * bump the epoch since 0.9.dfsg-2 > 0.9-1
+  * bump the standard version to 3.7.3
+  * do not create the /usr/include/ode/config which was useless
+
+ -- Gonéri Le Bouder <goneri@rulezlan.org>  Wed, 30 Apr 2008 15:30:34 +0200
+
+ode (1:0.9.dfsg-2) unstable; urgency=low
+
+  [ Eddy Petrișor ]
+  * fix Vcs-Svn URL to point to svn, not the incomplete ssh location
+
+  [ Goneri Le Bouder ]
+  * indent the Uploaders and Build-Depends entries
+  * add libglu-dev and libgl-dev as alternative build dependency for Mesa to
+    be able to build with Nvidia nvidia-glx-dev (Closes: #475564)
+  * remove some file from the diff.gz
+
+ -- Goneri Le Bouder <goneri@rulezlan.org>  Sat, 26 Apr 2008 02:58:35 +0200
+
+ode (1:0.9.dfsg-1) unstable; urgency=low
+
+  [ Barry deFreese ]
+  * Add watch file
+  * Add myself to uploaders
+
+  [ Gonéri Le Bouder ]
+  * New upstream release
+  * use binary-indep, dpkg-buildpackage -B doesn't build binary indep
+    package anymore
+  * add Vcs-Browser
+  * Renamed “XS-Vcs-Svn” to “Vcs-Svn”, now officially supported by dpkg.
+  * move homepage from the description to the new Homepage field
+  * libode 0.5 transition is finished, add the Conflicts and Replaces fields
+
+ -- Gonéri Le Bouder <goneri@rulezlan.org>  Sat, 24 Nov 2007 19:23:58 +0100
+
+ode (1:0.8.dfsg-3) unstable; urgency=low
+
+  * Apply changes provide by Jiří Paleček about the DEB_BUILD_OPTIONS parsing
+    (Closes: #431057)
+   - rules: do not parse DEB_BUILD_OPTIONS to find nostrip anymore, lets
+     dh_strip decide if we should strip or not the binarys
+   - noopt: really exports the correct flags to g++
+  * Add a README.Debian to explain why we use GIMPACT instead of OPCODE and
+    warn of the missing double precision support (Closes: #431058)
+  * add a missing epoch in the shlibs (Closes: #412026)
+  * fix /usr/lib/libode.so link to /usr/lib/libode.so.0debian1.8.0 
+
+ -- Gonéri Le Bouder <goneri@rulezlan.org>  Fri, 29 Jun 2007 13:54:43 +0200
+
+ode (1:0.8.dfsg-2) unstable; urgency=low
+
+  [ Miriam Ruiz ]
+  * Upgraded SONAME from 0.8.0 to 0debian1.0.0 until Upstream decides to take
+    care of SONAMEs properly.
+  * Changed debian/rules not to ignore make clean errors.
+  * Added homepage to description in debian/control.
+  * libode0-dev depends on libode0 (>= ${binary:Version})
+    (Closes: #429607, #430602)
+  * rename libode0c2 package to libode0debian1 to avoid breakage during upgrade from
+    libode 0.5
+  
+ -- Miriam Ruiz <little_miry@yahoo.es>  Wed, 27 Jun 2007 07:33:58 +0000
+
+ode (1:0.8.dfsg-1) unstable; urgency=low
+
+   * new upstream release
+    - remove add_fPIC_flag.diff (patch accepted)
+    - update fix_makeinstall.diff to not create the symlink
+    - ode 0.8 is not compatible with binary created with ode 0.5. use the -V
+    flag to force packages build with this release to use at last
+    ode >= 0.8-1, thanks Yaroslav Halchenko (Closes: #412026)
+    - dfsg: remove the OPCODE and contrib directorys because of missing license
+   * remove --disable-opcode and use new --with-trimesh=gimpact instead
+    GIMPACT is used to manage collision (Closes: #383868, #408023)
+    - remove fix_dTRIMESH_ENABLED_undef.diff (useless)
+   * clean up in debian/rules
+   * debian/copyright:
+    - Debian Games Team is the new maintainer
+    - update the home site url and add a paragraph about GIMPACT
+   * new package: libode-doc
+   * add XS-Vcs-Svn informations in the control file
+
+ -- Gonéri Le Bouder <goneri@rulezlan.org>  Sat,  2 Jun 2007 01:12:35 +0200
+
+ode (1:0.7-1) experimental; urgency=low
+
+  [ Gonéri Le Bouder ]
+  * new upstream release (Closes: #379791)
+   - extend copyright from 2001-2003 to 2001-2006
+   - add patches:
+    fix_makeinstall.diff: fix the use of DESTDIR. Patch forwarded
+    to upstream
+    add_fPIC_flag.diff: add missing -fPIC flag
+    fix_dTRIMESH_ENABLED_undef.diff: fix the build is configure is
+    called with --disable-opcode. Patch forwarded. Fixed in upstream
+   - README renamed README.txt
+   - CHANGELOG renamed CHANGELOG.txt
+  * package co-maintained by the Debian Games Team
+   - Guus Sliepen moved from maintainer to uploader
+   - add myself in uploader
+  * improve the clean target to remove every created files
+  * builddeps on quilt
+  * install /usr/bin/ode-config
+  * compat 5
+  * use dh_install
+  * Standards-Version: 3.7.2
+  * add ode-config.man.sgml
+  * add libglu1-mesa-dev and libgl1-mesa-dev in builddeps
+
+ -- Gonéri Le Bouder <goneri@rulezlan.org>  Wed, 11 Oct 2006 15:45:57 +0200
+
+ode (1:0.5-5) unstable; urgency=low
+
+  * Disable OPCODE, it does pointer arithmetic in a very unsafe way and it
+    won't compile on 64 bit architectures. Closes: #297924
+
+ -- Guus Sliepen <guus@debian.org>  Fri,  5 Aug 2005 15:04:27 +0200
+
+ode (1:0.5-4) unstable; urgency=low
+
+  * C++ ABI change, rename libode0 to libode0c2
+  * Include user-settings file in libode-dev. Closes: #318837
+
+ -- Guus Sliepen <guus@debian.org>  Fri, 22 Jul 2005 14:04:25 +0200
+
+ode (1:0.5-3) unstable; urgency=low
+
+  * Upstream says I can create a libode.so.0, so I'm adding a libode0 package
+    and changing libode-dev to libode0-dev. Closes: #286937
+
+ -- Guus Sliepen <guus@debian.org>  Fri, 28 Jan 2005 15:14:32 +0100
+
+ode (1:0.5-2) unstable; urgency=low
+
+  * Enable OPCODE support. Closes: #290620
+
+ -- Guus Sliepen <guus@debian.org>  Mon, 17 Jan 2005 13:53:30 +0100
+
+ode (1:0.5-1) unstable; urgency=low
+
+  * New upstream release. Closes: #251876
+
+ -- Guus Sliepen <guus@debian.org>  Wed,  2 Jun 2004 17:04:53 +0200
+
+ode (0.039-1) unstable; urgency=low
+
+  * New upstream release.
+  * Add a PIC version of the static library to libode-dev.
+
+ -- Guus Sliepen <guus@debian.org>  Wed, 23 Jul 2003 15:12:54 +0200
+
+ode (0.035-3) unstable; urgency=low
+
+  * Remove multiline string literals. Closes: #194998
+
+ -- Guus Sliepen <guus@debian.org>  Wed, 28 May 2003 14:55:54 +0200
+
+ode (0.035-2) unstable; urgency=low
+
+  * Proper name for -dev package.
+
+ -- Guus Sliepen <guus@debian.org>  Tue, 18 Feb 2003 23:44:45 +0100
+
+ode (0.035-1) unstable; urgency=low
+
+  * Initial Release. Closes: #180349
+
+ -- Guus Sliepen <guus@debian.org>  Sun,  9 Feb 2003 12:23:52 +0100
+
--- ode-0.11.orig/debian/libode-dev.install
+++ ode-0.11/debian/libode-dev.install
@@ -0,0 +1,3 @@
+debian/tmp/usr/include/*
+debian/tmp/usr/lib/lib*.a
+debian/tmp/usr/bin/ode-config
--- ode-0.11.orig/debian/watch
+++ ode-0.11/debian/watch
@@ -0,0 +1,4 @@
+version=3
+
+opts="dversionmangle=s/\.dfsg(.?\d+)?$//" \
+http://sf.net/opende/ode-src-([\d.]+)\.zip
--- ode-0.11.orig/debian/libode-dev.dirs
+++ ode-0.11/debian/libode-dev.dirs
@@ -0,0 +1,2 @@
+usr/lib
+usr/include/ode
--- ode-0.11.orig/debian/libode1.dirs
+++ ode-0.11/debian/libode1.dirs
@@ -0,0 +1 @@
+usr/lib
--- ode-0.11.orig/debian/patches/fix_makeinstall.diff
+++ ode-0.11/debian/patches/fix_makeinstall.diff
@@ -0,0 +1,50 @@
+Index: ode-0.9.dfsg/Makefile.in
+===================================================================
+--- ode-0.9.dfsg.orig/Makefile.in	2007-10-24 19:49:07.000000000 +0000
++++ ode-0.9.dfsg/Makefile.in	2007-10-24 19:49:16.000000000 +0000
+@@ -652,13 +652,13 @@
+ 	rm -rf ${PACKAGE}-${VERSION}
+ 
+ @USE_SONAME_TRUE@install-exec-hook:
+-@USE_SONAME_TRUE@	ln -s $(libdir)/@ODE_SONAME@.@ODE_REVISION@.@ODE_AGE@ \
+-@USE_SONAME_TRUE@	$(libdir)/libode.so
+-@USE_SONAME_TRUE@	ln -s $(libdir)/@ODE_SONAME@.@ODE_REVISION@.@ODE_AGE@ \
+-@USE_SONAME_TRUE@	$(libdir)/@ODE_SONAME@
+-@USE_SONAME_TRUE@	ln -s $(libdir)/@ODE_SONAME@.@ODE_REVISION@.@ODE_AGE@ \
+-@USE_SONAME_TRUE@	$(libdir)/@ODE_SONAME@.@ODE_REVISION@
+-@USE_SONAME_TRUE@	/sbin/ldconfig
++#@USE_SONAME_TRUE@	ln -s $(libdir)/@ODE_SONAME@.@ODE_REVISION@.@ODE_AGE@ \
++#@USE_SONAME_TRUE@	$(libdir)/libode.so
++#@USE_SONAME_TRUE@	ln -s $(libdir)/@ODE_SONAME@.@ODE_REVISION@.@ODE_AGE@ \
++#@USE_SONAME_TRUE@	$(libdir)/@ODE_SONAME@
++#@USE_SONAME_TRUE@	ln -s $(libdir)/@ODE_SONAME@.@ODE_REVISION@.@ODE_AGE@ \
++#@USE_SONAME_TRUE@	$(libdir)/@ODE_SONAME@.@ODE_REVISION@
++#@USE_SONAME_TRUE@	/sbin/ldconfig
+ @USE_SONAME_FALSE@install-exec-hook:
+ # Tell versions [3.59,3.63) of GNU make to not export all variables.
+ # Otherwise a system limit (for SysV at least) may be exceeded.
+Index: ode-0.9.dfsg/Makefile.am
+===================================================================
+--- ode-0.9.dfsg.orig/Makefile.am	2007-10-24 19:49:08.000000000 +0000
++++ ode-0.9.dfsg/Makefile.am	2007-10-24 19:49:16.000000000 +0000
+@@ -25,13 +25,13 @@
+ 
+ if USE_SONAME
+ install-exec-hook:
+-	ln -s $(libdir)/@ODE_SONAME@.@ODE_REVISION@.@ODE_AGE@ \
+-	$(libdir)/libode.so
+-	ln -s $(libdir)/@ODE_SONAME@.@ODE_REVISION@.@ODE_AGE@ \
+-	$(libdir)/@ODE_SONAME@
+-	ln -s $(libdir)/@ODE_SONAME@.@ODE_REVISION@.@ODE_AGE@ \
+-	$(libdir)/@ODE_SONAME@.@ODE_REVISION@
+-	/sbin/ldconfig
++#	ln -s $(libdir)/@ODE_SONAME@.@ODE_REVISION@.@ODE_AGE@ \
++#	$(libdir)/libode.so
++#	ln -s $(libdir)/@ODE_SONAME@.@ODE_REVISION@.@ODE_AGE@ \
++#	$(libdir)/@ODE_SONAME@
++#	ln -s $(libdir)/@ODE_SONAME@.@ODE_REVISION@.@ODE_AGE@ \
++#	$(libdir)/@ODE_SONAME@.@ODE_REVISION@
++#	/sbin/ldconfig
+ else
+ install-exec-hook:
+ endif
--- ode-0.11.orig/debian/patches/change_soname.patch
+++ ode-0.11/debian/patches/change_soname.patch
@@ -0,0 +1,13 @@
+Index: ode-0.9.dfsg/configure
+===================================================================
+--- ode-0.9.dfsg.orig/configure	2007-10-12 12:36:51.000000000 +0000
++++ ode-0.9.dfsg/configure	2007-10-24 19:46:57.000000000 +0000
+@@ -1818,7 +1818,7 @@
+ 
+ 
+ 
+-ODE_CURRENT=0
++ODE_CURRENT=0debian1
+ ODE_REVISION=9
+ ODE_AGE=0
+ ODE_RELEASE=$ODE_CURRENT.$ODE_REVISION.$ODE_AGE
--- ode-0.11.orig/include/Makefile.in
+++ ode-0.11/include/Makefile.in
@@ -1,8 +1,9 @@
-# Makefile.in generated by automake 1.10.1 from Makefile.am.
+# Makefile.in generated by automake 1.11 from Makefile.am.
 # @configure_input@
 
 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
+# Inc.
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -15,8 +16,9 @@
 @SET_MAKE@
 VPATH = @srcdir@
 pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
 install_sh_DATA = $(install_sh) -c -m 644
 install_sh_PROGRAM = $(install_sh) -c
@@ -40,6 +42,7 @@
 mkinstalldirs = $(install_sh) -d
 CONFIG_HEADER = $(top_builddir)/ode/src/config.h
 CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
 SOURCES =
 DIST_SOURCES =
 RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
@@ -51,10 +54,38 @@
 	ps-recursive uninstall-recursive
 RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
   distclean-recursive maintainer-clean-recursive
+AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
+	$(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
+	distdir
 ETAGS = etags
 CTAGS = ctags
 DIST_SUBDIRS = $(SUBDIRS)
 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+am__relativize = \
+  dir0=`pwd`; \
+  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
+  sed_rest='s,^[^/]*/*,,'; \
+  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
+  sed_butlast='s,/*[^/]*$$,,'; \
+  while test -n "$$dir1"; do \
+    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
+    if test "$$first" != "."; then \
+      if test "$$first" = ".."; then \
+        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
+        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
+      else \
+        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
+        if test "$$first2" = "$$first"; then \
+          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
+        else \
+          dir2="../$$dir2"; \
+        fi; \
+        dir0="$$dir0"/"$$first"; \
+      fi; \
+    fi; \
+    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
+  done; \
+  reldir="$$dir2"
 ACLOCAL = @ACLOCAL@
 ALLOCA = @ALLOCA@
 AMTAR = @AMTAR@
@@ -78,15 +109,14 @@
 DEPDIR = @DEPDIR@
 DLLTOOL = @DLLTOOL@
 DSYMUTIL = @DSYMUTIL@
-ECHO = @ECHO@
+DUMPBIN = @DUMPBIN@
 ECHO_C = @ECHO_C@
 ECHO_N = @ECHO_N@
 ECHO_T = @ECHO_T@
 EGREP = @EGREP@
 EXEEXT = @EXEEXT@
 EXTRA_LIBTOOL_LDFLAGS = @EXTRA_LIBTOOL_LDFLAGS@
-F77 = @F77@
-FFLAGS = @FFLAGS@
+FGREP = @FGREP@
 GL_LIBS = @GL_LIBS@
 GREP = @GREP@
 INSTALL = @INSTALL@
@@ -94,26 +124,32 @@
 INSTALL_PROGRAM = @INSTALL_PROGRAM@
 INSTALL_SCRIPT = @INSTALL_SCRIPT@
 INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LD = @LD@
 LDFLAGS = @LDFLAGS@
 LIBOBJS = @LIBOBJS@
 LIBS = @LIBS@
 LIBSTDCXX = @LIBSTDCXX@
 LIBTOOL = @LIBTOOL@
+LIPO = @LIPO@
 LN_S = @LN_S@
 LTLIBOBJS = @LTLIBOBJS@
 MAKEINFO = @MAKEINFO@
 MKDIR_P = @MKDIR_P@
+NM = @NM@
 NMEDIT = @NMEDIT@
 OBJDUMP = @OBJDUMP@
 OBJEXT = @OBJEXT@
 ODE_PRECISION = @ODE_PRECISION@
 ODE_RELEASE = @ODE_RELEASE@
 ODE_VERSION_INFO = @ODE_VERSION_INFO@
+OTOOL = @OTOOL@
+OTOOL64 = @OTOOL64@
 PACKAGE = @PACKAGE@
 PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
 PACKAGE_NAME = @PACKAGE_NAME@
 PACKAGE_STRING = @PACKAGE_STRING@
 PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
 PACKAGE_VERSION = @PACKAGE_VERSION@
 PATH_SEPARATOR = @PATH_SEPARATOR@
 RANLIB = @RANLIB@
@@ -134,7 +170,7 @@
 abs_top_srcdir = @abs_top_srcdir@
 ac_ct_CC = @ac_ct_CC@
 ac_ct_CXX = @ac_ct_CXX@
-ac_ct_F77 = @ac_ct_F77@
+ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
 ac_ct_WINDRES = @ac_ct_WINDRES@
 am__include = @am__include@
 am__leading_dot = @am__leading_dot@
@@ -166,6 +202,7 @@
 libexecdir = @libexecdir@
 localedir = @localedir@
 localstatedir = @localstatedir@
+lt_ECHO = @lt_ECHO@
 mandir = @mandir@
 mkdir_p = @mkdir_p@
 oldincludedir = @oldincludedir@
@@ -190,14 +227,14 @@
 	@for dep in $?; do \
 	  case '$(am__configure_deps)' in \
 	    *$$dep*) \
-	      cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
-		&& exit 0; \
+	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+	        && { if test -f $@; then exit 0; else break; fi; }; \
 	      exit 1;; \
 	  esac; \
 	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign  include/Makefile'; \
-	cd $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign  include/Makefile
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign include/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign include/Makefile
 .PRECIOUS: Makefile
 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 	@case '$?' in \
@@ -215,6 +252,7 @@
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 $(ACLOCAL_M4):  $(am__aclocal_m4_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
 
 mostlyclean-libtool:
 	-rm -f *.lo
@@ -246,7 +284,7 @@
 	  else \
 	    local_target="$$target"; \
 	  fi; \
-	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
 	  || eval $$failcom; \
 	done; \
 	if test "$$dot_seen" = "no"; then \
@@ -280,16 +318,16 @@
 	  else \
 	    local_target="$$target"; \
 	  fi; \
-	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
 	  || eval $$failcom; \
 	done && test -z "$$fail"
 tags-recursive:
 	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
+	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
 	done
 ctags-recursive:
 	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
+	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
 	done
 
 ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
@@ -297,14 +335,14 @@
 	unique=`for i in $$list; do \
 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 	  done | \
-	  $(AWK) '{ files[$$0] = 1; nonemtpy = 1; } \
+	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
 	mkid -fID $$unique
 tags: TAGS
 
 TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
+	set x; \
 	here=`pwd`; \
 	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
 	  include_option=--etags-include; \
@@ -316,7 +354,7 @@
 	list='$(SUBDIRS)'; for subdir in $$list; do \
 	  if test "$$subdir" = .; then :; else \
 	    test ! -f $$subdir/TAGS || \
-	      tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
+	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
 	  fi; \
 	done; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
@@ -325,29 +363,34 @@
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
 	  test -n "$$unique" || unique=$$empty_fix; \
-	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	    $$tags $$unique; \
+	  if test $$# -gt 0; then \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
 	fi
 ctags: CTAGS
 CTAGS: ctags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	test -z "$(CTAGS_ARGS)$$tags$$unique" \
+	test -z "$(CTAGS_ARGS)$$unique" \
 	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
-	     $$tags $$unique
+	     $$unique
 
 GTAGS:
 	here=`$(am__cd) $(top_builddir) && pwd` \
-	  && cd $(top_srcdir) \
-	  && gtags -i $(GTAGS_ARGS) $$here
+	  && $(am__cd) $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) "$$here"
 
 distclean-tags:
 	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
@@ -368,29 +411,44 @@
 	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
 	  if test -d $$d/$$file; then \
 	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
 	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 	    fi; \
-	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
 	  else \
-	    test -f $(distdir)/$$file \
-	    || cp -p $$d/$$file $(distdir)/$$file \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
 	    || exit 1; \
 	  fi; \
 	done
-	list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
 	  if test "$$subdir" = .; then :; else \
 	    test -d "$(distdir)/$$subdir" \
 	    || $(MKDIR_P) "$(distdir)/$$subdir" \
 	    || exit 1; \
-	    distdir=`$(am__cd) $(distdir) && pwd`; \
-	    top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
-	    (cd $$subdir && \
+	  fi; \
+	done
+	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+	  if test "$$subdir" = .; then :; else \
+	    dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
+	    $(am__relativize); \
+	    new_distdir=$$reldir; \
+	    dir1=$$subdir; dir2="$(top_distdir)"; \
+	    $(am__relativize); \
+	    new_top_distdir=$$reldir; \
+	    echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
+	    echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
+	    ($(am__cd) $$subdir && \
 	      $(MAKE) $(AM_MAKEFLAGS) \
-	        top_distdir="$$top_distdir" \
-	        distdir="$$distdir/$$subdir" \
+	        top_distdir="$$new_top_distdir" \
+	        distdir="$$new_distdir" \
 		am__remove_distdir=: \
 		am__skip_length_check=: \
+		am__skip_mode_fix=: \
 	        distdir) \
 	      || exit 1; \
 	  fi; \
@@ -420,6 +478,7 @@
 
 distclean-generic:
 	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
 
 maintainer-clean-generic:
 	@echo "This command is intended for maintainers to use"
@@ -438,6 +497,8 @@
 
 html: html-recursive
 
+html-am:
+
 info: info-recursive
 
 info-am:
@@ -446,18 +507,28 @@
 
 install-dvi: install-dvi-recursive
 
+install-dvi-am:
+
 install-exec-am:
 
 install-html: install-html-recursive
 
+install-html-am:
+
 install-info: install-info-recursive
 
+install-info-am:
+
 install-man:
 
 install-pdf: install-pdf-recursive
 
+install-pdf-am:
+
 install-ps: install-ps-recursive
 
+install-ps-am:
+
 installcheck-am:
 
 maintainer-clean: maintainer-clean-recursive
@@ -478,8 +549,8 @@
 
 uninstall-am:
 
-.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) install-am \
-	install-strip
+.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) ctags-recursive \
+	install-am install-strip tags-recursive
 
 .PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
 	all all-am check check-am clean clean-generic clean-libtool \
@@ -495,6 +566,7 @@
 	mostlyclean-libtool pdf pdf-am ps ps-am tags tags-recursive \
 	uninstall uninstall-am
 
+
 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 # Otherwise a system limit (for SysV at least) may be exceeded.
 .NOEXPORT:
--- ode-0.11.orig/include/ode/Makefile.in
+++ ode-0.11/include/ode/Makefile.in
@@ -1,8 +1,9 @@
-# Makefile.in generated by automake 1.10.1 from Makefile.am.
+# Makefile.in generated by automake 1.11 from Makefile.am.
 # @configure_input@
 
 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
+# Inc.
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -16,8 +17,9 @@
 
 VPATH = @srcdir@
 pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
 install_sh_DATA = $(install_sh) -c -m 644
 install_sh_PROGRAM = $(install_sh) -c
@@ -42,6 +44,7 @@
 mkinstalldirs = $(install_sh) -d
 CONFIG_HEADER = $(top_builddir)/ode/src/config.h
 CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
 SOURCES =
 DIST_SOURCES =
 am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
@@ -49,9 +52,23 @@
     $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
     *) f=$$p;; \
   esac;
-am__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+  for p in $$list; do echo "$$p $$p"; done | \
+  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+    if (++n[$$2] == $(am__install_max)) \
+      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+    END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
 am__installdirs = "$(DESTDIR)$(libode_la_includedir)"
-libode_la_includeHEADERS_INSTALL = $(INSTALL_HEADER)
 HEADERS = $(libode_la_include_HEADERS)
 ETAGS = etags
 CTAGS = ctags
@@ -79,15 +96,14 @@
 DEPDIR = @DEPDIR@
 DLLTOOL = @DLLTOOL@
 DSYMUTIL = @DSYMUTIL@
-ECHO = @ECHO@
+DUMPBIN = @DUMPBIN@
 ECHO_C = @ECHO_C@
 ECHO_N = @ECHO_N@
 ECHO_T = @ECHO_T@
 EGREP = @EGREP@
 EXEEXT = @EXEEXT@
 EXTRA_LIBTOOL_LDFLAGS = @EXTRA_LIBTOOL_LDFLAGS@
-F77 = @F77@
-FFLAGS = @FFLAGS@
+FGREP = @FGREP@
 GL_LIBS = @GL_LIBS@
 GREP = @GREP@
 INSTALL = @INSTALL@
@@ -95,26 +111,32 @@
 INSTALL_PROGRAM = @INSTALL_PROGRAM@
 INSTALL_SCRIPT = @INSTALL_SCRIPT@
 INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LD = @LD@
 LDFLAGS = @LDFLAGS@
 LIBOBJS = @LIBOBJS@
 LIBS = @LIBS@
 LIBSTDCXX = @LIBSTDCXX@
 LIBTOOL = @LIBTOOL@
+LIPO = @LIPO@
 LN_S = @LN_S@
 LTLIBOBJS = @LTLIBOBJS@
 MAKEINFO = @MAKEINFO@
 MKDIR_P = @MKDIR_P@
+NM = @NM@
 NMEDIT = @NMEDIT@
 OBJDUMP = @OBJDUMP@
 OBJEXT = @OBJEXT@
 ODE_PRECISION = @ODE_PRECISION@
 ODE_RELEASE = @ODE_RELEASE@
 ODE_VERSION_INFO = @ODE_VERSION_INFO@
+OTOOL = @OTOOL@
+OTOOL64 = @OTOOL64@
 PACKAGE = @PACKAGE@
 PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
 PACKAGE_NAME = @PACKAGE_NAME@
 PACKAGE_STRING = @PACKAGE_STRING@
 PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
 PACKAGE_VERSION = @PACKAGE_VERSION@
 PATH_SEPARATOR = @PATH_SEPARATOR@
 RANLIB = @RANLIB@
@@ -135,7 +157,7 @@
 abs_top_srcdir = @abs_top_srcdir@
 ac_ct_CC = @ac_ct_CC@
 ac_ct_CXX = @ac_ct_CXX@
-ac_ct_F77 = @ac_ct_F77@
+ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
 ac_ct_WINDRES = @ac_ct_WINDRES@
 am__include = @am__include@
 am__leading_dot = @am__leading_dot@
@@ -167,6 +189,7 @@
 libexecdir = @libexecdir@
 localedir = @localedir@
 localstatedir = @localstatedir@
+lt_ECHO = @lt_ECHO@
 mandir = @mandir@
 mkdir_p = @mkdir_p@
 oldincludedir = @oldincludedir@
@@ -214,14 +237,14 @@
 	@for dep in $?; do \
 	  case '$(am__configure_deps)' in \
 	    *$$dep*) \
-	      cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
-		&& exit 0; \
+	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+	        && { if test -f $@; then exit 0; else break; fi; }; \
 	      exit 1;; \
 	  esac; \
 	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign  include/ode/Makefile'; \
-	cd $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign  include/ode/Makefile
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign include/ode/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign include/ode/Makefile
 .PRECIOUS: Makefile
 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 	@case '$?' in \
@@ -239,6 +262,7 @@
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 $(ACLOCAL_M4):  $(am__aclocal_m4_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
 
 mostlyclean-libtool:
 	-rm -f *.lo
@@ -248,34 +272,37 @@
 install-libode_la_includeHEADERS: $(libode_la_include_HEADERS)
 	@$(NORMAL_INSTALL)
 	test -z "$(libode_la_includedir)" || $(MKDIR_P) "$(DESTDIR)$(libode_la_includedir)"
-	@list='$(libode_la_include_HEADERS)'; for p in $$list; do \
+	@list='$(libode_la_include_HEADERS)'; test -n "$(libode_la_includedir)" || list=; \
+	for p in $$list; do \
 	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
-	  f=$(am__strip_dir) \
-	  echo " $(libode_la_includeHEADERS_INSTALL) '$$d$$p' '$(DESTDIR)$(libode_la_includedir)/$$f'"; \
-	  $(libode_la_includeHEADERS_INSTALL) "$$d$$p" "$(DESTDIR)$(libode_la_includedir)/$$f"; \
+	  echo "$$d$$p"; \
+	done | $(am__base_list) | \
+	while read files; do \
+	  echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(libode_la_includedir)'"; \
+	  $(INSTALL_HEADER) $$files "$(DESTDIR)$(libode_la_includedir)" || exit $$?; \
 	done
 
 uninstall-libode_la_includeHEADERS:
 	@$(NORMAL_UNINSTALL)
-	@list='$(libode_la_include_HEADERS)'; for p in $$list; do \
-	  f=$(am__strip_dir) \
-	  echo " rm -f '$(DESTDIR)$(libode_la_includedir)/$$f'"; \
-	  rm -f "$(DESTDIR)$(libode_la_includedir)/$$f"; \
-	done
+	@list='$(libode_la_include_HEADERS)'; test -n "$(libode_la_includedir)" || list=; \
+	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
+	test -n "$$files" || exit 0; \
+	echo " ( cd '$(DESTDIR)$(libode_la_includedir)' && rm -f" $$files ")"; \
+	cd "$(DESTDIR)$(libode_la_includedir)" && rm -f $$files
 
 ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
 	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 	  done | \
-	  $(AWK) '{ files[$$0] = 1; nonemtpy = 1; } \
+	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
 	mkid -fID $$unique
 tags: TAGS
 
 TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
+	set x; \
 	here=`pwd`; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
@@ -283,29 +310,34 @@
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
 	  test -n "$$unique" || unique=$$empty_fix; \
-	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	    $$tags $$unique; \
+	  if test $$# -gt 0; then \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
 	fi
 ctags: CTAGS
 CTAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	test -z "$(CTAGS_ARGS)$$tags$$unique" \
+	test -z "$(CTAGS_ARGS)$$unique" \
 	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
-	     $$tags $$unique
+	     $$unique
 
 GTAGS:
 	here=`$(am__cd) $(top_builddir) && pwd` \
-	  && cd $(top_srcdir) \
-	  && gtags -i $(GTAGS_ARGS) $$here
+	  && $(am__cd) $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) "$$here"
 
 distclean-tags:
 	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
@@ -326,13 +358,17 @@
 	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
 	  if test -d $$d/$$file; then \
 	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
 	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 	    fi; \
-	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
 	  else \
-	    test -f $(distdir)/$$file \
-	    || cp -p $$d/$$file $(distdir)/$$file \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
 	    || exit 1; \
 	  fi; \
 	done
@@ -363,6 +399,7 @@
 
 distclean-generic:
 	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
 
 maintainer-clean-generic:
 	@echo "This command is intended for maintainers to use"
@@ -381,6 +418,8 @@
 
 html: html-am
 
+html-am:
+
 info: info-am
 
 info-am:
@@ -389,18 +428,28 @@
 
 install-dvi: install-dvi-am
 
+install-dvi-am:
+
 install-exec-am:
 
 install-html: install-html-am
 
+install-html-am:
+
 install-info: install-info-am
 
+install-info-am:
+
 install-man:
 
 install-pdf: install-pdf-am
 
+install-pdf-am:
+
 install-ps: install-ps-am
 
+install-ps-am:
+
 installcheck-am:
 
 maintainer-clean: maintainer-clean-am
@@ -436,6 +485,7 @@
 	mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
 	tags uninstall uninstall-am uninstall-libode_la_includeHEADERS
 
+
 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 # Otherwise a system limit (for SysV at least) may be exceeded.
 .NOEXPORT:
--- ode-0.11.orig/include/drawstuff/Makefile.in
+++ ode-0.11/include/drawstuff/Makefile.in
@@ -1,8 +1,9 @@
-# Makefile.in generated by automake 1.10.1 from Makefile.am.
+# Makefile.in generated by automake 1.11 from Makefile.am.
 # @configure_input@
 
 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
+# Inc.
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -16,8 +17,9 @@
 
 VPATH = @srcdir@
 pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
 install_sh_DATA = $(install_sh) -c -m 644
 install_sh_PROGRAM = $(install_sh) -c
@@ -42,6 +44,7 @@
 mkinstalldirs = $(install_sh) -d
 CONFIG_HEADER = $(top_builddir)/ode/src/config.h
 CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
 SOURCES =
 DIST_SOURCES =
 HEADERS = $(noinst_HEADERS)
@@ -71,15 +74,14 @@
 DEPDIR = @DEPDIR@
 DLLTOOL = @DLLTOOL@
 DSYMUTIL = @DSYMUTIL@
-ECHO = @ECHO@
+DUMPBIN = @DUMPBIN@
 ECHO_C = @ECHO_C@
 ECHO_N = @ECHO_N@
 ECHO_T = @ECHO_T@
 EGREP = @EGREP@
 EXEEXT = @EXEEXT@
 EXTRA_LIBTOOL_LDFLAGS = @EXTRA_LIBTOOL_LDFLAGS@
-F77 = @F77@
-FFLAGS = @FFLAGS@
+FGREP = @FGREP@
 GL_LIBS = @GL_LIBS@
 GREP = @GREP@
 INSTALL = @INSTALL@
@@ -87,26 +89,32 @@
 INSTALL_PROGRAM = @INSTALL_PROGRAM@
 INSTALL_SCRIPT = @INSTALL_SCRIPT@
 INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LD = @LD@
 LDFLAGS = @LDFLAGS@
 LIBOBJS = @LIBOBJS@
 LIBS = @LIBS@
 LIBSTDCXX = @LIBSTDCXX@
 LIBTOOL = @LIBTOOL@
+LIPO = @LIPO@
 LN_S = @LN_S@
 LTLIBOBJS = @LTLIBOBJS@
 MAKEINFO = @MAKEINFO@
 MKDIR_P = @MKDIR_P@
+NM = @NM@
 NMEDIT = @NMEDIT@
 OBJDUMP = @OBJDUMP@
 OBJEXT = @OBJEXT@
 ODE_PRECISION = @ODE_PRECISION@
 ODE_RELEASE = @ODE_RELEASE@
 ODE_VERSION_INFO = @ODE_VERSION_INFO@
+OTOOL = @OTOOL@
+OTOOL64 = @OTOOL64@
 PACKAGE = @PACKAGE@
 PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
 PACKAGE_NAME = @PACKAGE_NAME@
 PACKAGE_STRING = @PACKAGE_STRING@
 PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
 PACKAGE_VERSION = @PACKAGE_VERSION@
 PATH_SEPARATOR = @PATH_SEPARATOR@
 RANLIB = @RANLIB@
@@ -127,7 +135,7 @@
 abs_top_srcdir = @abs_top_srcdir@
 ac_ct_CC = @ac_ct_CC@
 ac_ct_CXX = @ac_ct_CXX@
-ac_ct_F77 = @ac_ct_F77@
+ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
 ac_ct_WINDRES = @ac_ct_WINDRES@
 am__include = @am__include@
 am__leading_dot = @am__leading_dot@
@@ -159,6 +167,7 @@
 libexecdir = @libexecdir@
 localedir = @localedir@
 localstatedir = @localstatedir@
+lt_ECHO = @lt_ECHO@
 mandir = @mandir@
 mkdir_p = @mkdir_p@
 oldincludedir = @oldincludedir@
@@ -183,14 +192,14 @@
 	@for dep in $?; do \
 	  case '$(am__configure_deps)' in \
 	    *$$dep*) \
-	      cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
-		&& exit 0; \
+	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+	        && { if test -f $@; then exit 0; else break; fi; }; \
 	      exit 1;; \
 	  esac; \
 	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign  include/drawstuff/Makefile'; \
-	cd $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign  include/drawstuff/Makefile
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign include/drawstuff/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign include/drawstuff/Makefile
 .PRECIOUS: Makefile
 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 	@case '$?' in \
@@ -208,6 +217,7 @@
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 $(ACLOCAL_M4):  $(am__aclocal_m4_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
 
 mostlyclean-libtool:
 	-rm -f *.lo
@@ -220,14 +230,14 @@
 	unique=`for i in $$list; do \
 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 	  done | \
-	  $(AWK) '{ files[$$0] = 1; nonemtpy = 1; } \
+	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
 	mkid -fID $$unique
 tags: TAGS
 
 TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
+	set x; \
 	here=`pwd`; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
@@ -235,29 +245,34 @@
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
 	  test -n "$$unique" || unique=$$empty_fix; \
-	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	    $$tags $$unique; \
+	  if test $$# -gt 0; then \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
 	fi
 ctags: CTAGS
 CTAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	test -z "$(CTAGS_ARGS)$$tags$$unique" \
+	test -z "$(CTAGS_ARGS)$$unique" \
 	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
-	     $$tags $$unique
+	     $$unique
 
 GTAGS:
 	here=`$(am__cd) $(top_builddir) && pwd` \
-	  && cd $(top_srcdir) \
-	  && gtags -i $(GTAGS_ARGS) $$here
+	  && $(am__cd) $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) "$$here"
 
 distclean-tags:
 	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
@@ -278,13 +293,17 @@
 	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
 	  if test -d $$d/$$file; then \
 	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
 	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 	    fi; \
-	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
 	  else \
-	    test -f $(distdir)/$$file \
-	    || cp -p $$d/$$file $(distdir)/$$file \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
 	    || exit 1; \
 	  fi; \
 	done
@@ -312,6 +331,7 @@
 
 distclean-generic:
 	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
 
 maintainer-clean-generic:
 	@echo "This command is intended for maintainers to use"
@@ -330,6 +350,8 @@
 
 html: html-am
 
+html-am:
+
 info: info-am
 
 info-am:
@@ -338,18 +360,28 @@
 
 install-dvi: install-dvi-am
 
+install-dvi-am:
+
 install-exec-am:
 
 install-html: install-html-am
 
+install-html-am:
+
 install-info: install-info-am
 
+install-info-am:
+
 install-man:
 
 install-pdf: install-pdf-am
 
+install-pdf-am:
+
 install-ps: install-ps-am
 
+install-ps-am:
+
 installcheck-am:
 
 maintainer-clean: maintainer-clean-am
@@ -385,6 +417,7 @@
 	mostlyclean-libtool pdf pdf-am ps ps-am tags uninstall \
 	uninstall-am
 
+
 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 # Otherwise a system limit (for SysV at least) may be exceeded.
 .NOEXPORT:
--- ode-0.11.orig/drawstuff/Makefile.in
+++ ode-0.11/drawstuff/Makefile.in
@@ -1,8 +1,9 @@
-# Makefile.in generated by automake 1.10.1 from Makefile.am.
+# Makefile.in generated by automake 1.11 from Makefile.am.
 # @configure_input@
 
 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
+# Inc.
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -15,8 +16,9 @@
 @SET_MAKE@
 VPATH = @srcdir@
 pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
 install_sh_DATA = $(install_sh) -c -m 644
 install_sh_PROGRAM = $(install_sh) -c
@@ -40,6 +42,7 @@
 mkinstalldirs = $(install_sh) -d
 CONFIG_HEADER = $(top_builddir)/ode/src/config.h
 CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
 SOURCES =
 DIST_SOURCES =
 RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
@@ -51,10 +54,38 @@
 	ps-recursive uninstall-recursive
 RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
   distclean-recursive maintainer-clean-recursive
+AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
+	$(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
+	distdir
 ETAGS = etags
 CTAGS = ctags
 DIST_SUBDIRS = src dstest
 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+am__relativize = \
+  dir0=`pwd`; \
+  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
+  sed_rest='s,^[^/]*/*,,'; \
+  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
+  sed_butlast='s,/*[^/]*$$,,'; \
+  while test -n "$$dir1"; do \
+    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
+    if test "$$first" != "."; then \
+      if test "$$first" = ".."; then \
+        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
+        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
+      else \
+        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
+        if test "$$first2" = "$$first"; then \
+          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
+        else \
+          dir2="../$$dir2"; \
+        fi; \
+        dir0="$$dir0"/"$$first"; \
+      fi; \
+    fi; \
+    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
+  done; \
+  reldir="$$dir2"
 ACLOCAL = @ACLOCAL@
 ALLOCA = @ALLOCA@
 AMTAR = @AMTAR@
@@ -78,15 +109,14 @@
 DEPDIR = @DEPDIR@
 DLLTOOL = @DLLTOOL@
 DSYMUTIL = @DSYMUTIL@
-ECHO = @ECHO@
+DUMPBIN = @DUMPBIN@
 ECHO_C = @ECHO_C@
 ECHO_N = @ECHO_N@
 ECHO_T = @ECHO_T@
 EGREP = @EGREP@
 EXEEXT = @EXEEXT@
 EXTRA_LIBTOOL_LDFLAGS = @EXTRA_LIBTOOL_LDFLAGS@
-F77 = @F77@
-FFLAGS = @FFLAGS@
+FGREP = @FGREP@
 GL_LIBS = @GL_LIBS@
 GREP = @GREP@
 INSTALL = @INSTALL@
@@ -94,26 +124,32 @@
 INSTALL_PROGRAM = @INSTALL_PROGRAM@
 INSTALL_SCRIPT = @INSTALL_SCRIPT@
 INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LD = @LD@
 LDFLAGS = @LDFLAGS@
 LIBOBJS = @LIBOBJS@
 LIBS = @LIBS@
 LIBSTDCXX = @LIBSTDCXX@
 LIBTOOL = @LIBTOOL@
+LIPO = @LIPO@
 LN_S = @LN_S@
 LTLIBOBJS = @LTLIBOBJS@
 MAKEINFO = @MAKEINFO@
 MKDIR_P = @MKDIR_P@
+NM = @NM@
 NMEDIT = @NMEDIT@
 OBJDUMP = @OBJDUMP@
 OBJEXT = @OBJEXT@
 ODE_PRECISION = @ODE_PRECISION@
 ODE_RELEASE = @ODE_RELEASE@
 ODE_VERSION_INFO = @ODE_VERSION_INFO@
+OTOOL = @OTOOL@
+OTOOL64 = @OTOOL64@
 PACKAGE = @PACKAGE@
 PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
 PACKAGE_NAME = @PACKAGE_NAME@
 PACKAGE_STRING = @PACKAGE_STRING@
 PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
 PACKAGE_VERSION = @PACKAGE_VERSION@
 PATH_SEPARATOR = @PATH_SEPARATOR@
 RANLIB = @RANLIB@
@@ -134,7 +170,7 @@
 abs_top_srcdir = @abs_top_srcdir@
 ac_ct_CC = @ac_ct_CC@
 ac_ct_CXX = @ac_ct_CXX@
-ac_ct_F77 = @ac_ct_F77@
+ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
 ac_ct_WINDRES = @ac_ct_WINDRES@
 am__include = @am__include@
 am__leading_dot = @am__leading_dot@
@@ -166,6 +202,7 @@
 libexecdir = @libexecdir@
 localedir = @localedir@
 localstatedir = @localstatedir@
+lt_ECHO = @lt_ECHO@
 mandir = @mandir@
 mkdir_p = @mkdir_p@
 oldincludedir = @oldincludedir@
@@ -191,14 +228,14 @@
 	@for dep in $?; do \
 	  case '$(am__configure_deps)' in \
 	    *$$dep*) \
-	      cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
-		&& exit 0; \
+	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+	        && { if test -f $@; then exit 0; else break; fi; }; \
 	      exit 1;; \
 	  esac; \
 	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign  drawstuff/Makefile'; \
-	cd $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign  drawstuff/Makefile
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign drawstuff/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign drawstuff/Makefile
 .PRECIOUS: Makefile
 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 	@case '$?' in \
@@ -216,6 +253,7 @@
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 $(ACLOCAL_M4):  $(am__aclocal_m4_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
 
 mostlyclean-libtool:
 	-rm -f *.lo
@@ -247,7 +285,7 @@
 	  else \
 	    local_target="$$target"; \
 	  fi; \
-	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
 	  || eval $$failcom; \
 	done; \
 	if test "$$dot_seen" = "no"; then \
@@ -281,16 +319,16 @@
 	  else \
 	    local_target="$$target"; \
 	  fi; \
-	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
 	  || eval $$failcom; \
 	done && test -z "$$fail"
 tags-recursive:
 	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
+	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
 	done
 ctags-recursive:
 	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
+	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
 	done
 
 ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
@@ -298,14 +336,14 @@
 	unique=`for i in $$list; do \
 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 	  done | \
-	  $(AWK) '{ files[$$0] = 1; nonemtpy = 1; } \
+	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
 	mkid -fID $$unique
 tags: TAGS
 
 TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
+	set x; \
 	here=`pwd`; \
 	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
 	  include_option=--etags-include; \
@@ -317,7 +355,7 @@
 	list='$(SUBDIRS)'; for subdir in $$list; do \
 	  if test "$$subdir" = .; then :; else \
 	    test ! -f $$subdir/TAGS || \
-	      tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
+	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
 	  fi; \
 	done; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
@@ -326,29 +364,34 @@
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
 	  test -n "$$unique" || unique=$$empty_fix; \
-	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	    $$tags $$unique; \
+	  if test $$# -gt 0; then \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
 	fi
 ctags: CTAGS
 CTAGS: ctags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	test -z "$(CTAGS_ARGS)$$tags$$unique" \
+	test -z "$(CTAGS_ARGS)$$unique" \
 	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
-	     $$tags $$unique
+	     $$unique
 
 GTAGS:
 	here=`$(am__cd) $(top_builddir) && pwd` \
-	  && cd $(top_srcdir) \
-	  && gtags -i $(GTAGS_ARGS) $$here
+	  && $(am__cd) $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) "$$here"
 
 distclean-tags:
 	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
@@ -369,29 +412,44 @@
 	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
 	  if test -d $$d/$$file; then \
 	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
 	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 	    fi; \
-	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
 	  else \
-	    test -f $(distdir)/$$file \
-	    || cp -p $$d/$$file $(distdir)/$$file \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
 	    || exit 1; \
 	  fi; \
 	done
-	list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
 	  if test "$$subdir" = .; then :; else \
 	    test -d "$(distdir)/$$subdir" \
 	    || $(MKDIR_P) "$(distdir)/$$subdir" \
 	    || exit 1; \
-	    distdir=`$(am__cd) $(distdir) && pwd`; \
-	    top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
-	    (cd $$subdir && \
+	  fi; \
+	done
+	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+	  if test "$$subdir" = .; then :; else \
+	    dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
+	    $(am__relativize); \
+	    new_distdir=$$reldir; \
+	    dir1=$$subdir; dir2="$(top_distdir)"; \
+	    $(am__relativize); \
+	    new_top_distdir=$$reldir; \
+	    echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
+	    echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
+	    ($(am__cd) $$subdir && \
 	      $(MAKE) $(AM_MAKEFLAGS) \
-	        top_distdir="$$top_distdir" \
-	        distdir="$$distdir/$$subdir" \
+	        top_distdir="$$new_top_distdir" \
+	        distdir="$$new_distdir" \
 		am__remove_distdir=: \
 		am__skip_length_check=: \
+		am__skip_mode_fix=: \
 	        distdir) \
 	      || exit 1; \
 	  fi; \
@@ -421,6 +479,7 @@
 
 distclean-generic:
 	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
 
 maintainer-clean-generic:
 	@echo "This command is intended for maintainers to use"
@@ -439,6 +498,8 @@
 
 html: html-recursive
 
+html-am:
+
 info: info-recursive
 
 info-am:
@@ -447,18 +508,28 @@
 
 install-dvi: install-dvi-recursive
 
+install-dvi-am:
+
 install-exec-am:
 
 install-html: install-html-recursive
 
+install-html-am:
+
 install-info: install-info-recursive
 
+install-info-am:
+
 install-man:
 
 install-pdf: install-pdf-recursive
 
+install-pdf-am:
+
 install-ps: install-ps-recursive
 
+install-ps-am:
+
 installcheck-am:
 
 maintainer-clean: maintainer-clean-recursive
@@ -479,8 +550,8 @@
 
 uninstall-am:
 
-.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) install-am \
-	install-strip
+.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) ctags-recursive \
+	install-am install-strip tags-recursive
 
 .PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
 	all all-am check check-am clean clean-generic clean-libtool \
@@ -496,6 +567,7 @@
 	mostlyclean-libtool pdf pdf-am ps ps-am tags tags-recursive \
 	uninstall uninstall-am
 
+
 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 # Otherwise a system limit (for SysV at least) may be exceeded.
 .NOEXPORT:
--- ode-0.11.orig/drawstuff/src/Makefile.in
+++ ode-0.11/drawstuff/src/Makefile.in
@@ -1,8 +1,9 @@
-# Makefile.in generated by automake 1.10.1 from Makefile.am.
+# Makefile.in generated by automake 1.11 from Makefile.am.
 # @configure_input@
 
 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
+# Inc.
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -19,8 +20,9 @@
 
 VPATH = @srcdir@
 pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
 install_sh_DATA = $(install_sh) -c -m 644
 install_sh_PROGRAM = $(install_sh) -c
@@ -47,6 +49,7 @@
 mkinstalldirs = $(install_sh) -d
 CONFIG_HEADER = $(top_builddir)/ode/src/config.h
 CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
 LTLIBRARIES = $(noinst_LTLIBRARIES)
 am__DEPENDENCIES_1 =
 @X11_TRUE@libdrawstuff_la_DEPENDENCIES = $(am__DEPENDENCIES_1)
@@ -64,6 +67,7 @@
 DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/ode/src
 depcomp = $(SHELL) $(top_srcdir)/depcomp
 am__depfiles_maybe = depfiles
+am__mv = mv -f
 CXXCOMPILE = $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
 	$(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS)
 LTCXXCOMPILE = $(LIBTOOL) --tag=CXX $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
@@ -110,15 +114,14 @@
 DEPDIR = @DEPDIR@
 DLLTOOL = @DLLTOOL@
 DSYMUTIL = @DSYMUTIL@
-ECHO = @ECHO@
+DUMPBIN = @DUMPBIN@
 ECHO_C = @ECHO_C@
 ECHO_N = @ECHO_N@
 ECHO_T = @ECHO_T@
 EGREP = @EGREP@
 EXEEXT = @EXEEXT@
 EXTRA_LIBTOOL_LDFLAGS = @EXTRA_LIBTOOL_LDFLAGS@
-F77 = @F77@
-FFLAGS = @FFLAGS@
+FGREP = @FGREP@
 GL_LIBS = @GL_LIBS@
 GREP = @GREP@
 INSTALL = @INSTALL@
@@ -126,26 +129,32 @@
 INSTALL_PROGRAM = @INSTALL_PROGRAM@
 INSTALL_SCRIPT = @INSTALL_SCRIPT@
 INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LD = @LD@
 LDFLAGS = @LDFLAGS@
 LIBOBJS = @LIBOBJS@
 LIBS = @LIBS@
 LIBSTDCXX = @LIBSTDCXX@
 LIBTOOL = @LIBTOOL@
+LIPO = @LIPO@
 LN_S = @LN_S@
 LTLIBOBJS = @LTLIBOBJS@
 MAKEINFO = @MAKEINFO@
 MKDIR_P = @MKDIR_P@
+NM = @NM@
 NMEDIT = @NMEDIT@
 OBJDUMP = @OBJDUMP@
 OBJEXT = @OBJEXT@
 ODE_PRECISION = @ODE_PRECISION@
 ODE_RELEASE = @ODE_RELEASE@
 ODE_VERSION_INFO = @ODE_VERSION_INFO@
+OTOOL = @OTOOL@
+OTOOL64 = @OTOOL64@
 PACKAGE = @PACKAGE@
 PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
 PACKAGE_NAME = @PACKAGE_NAME@
 PACKAGE_STRING = @PACKAGE_STRING@
 PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
 PACKAGE_VERSION = @PACKAGE_VERSION@
 PATH_SEPARATOR = @PATH_SEPARATOR@
 RANLIB = @RANLIB@
@@ -166,7 +175,7 @@
 abs_top_srcdir = @abs_top_srcdir@
 ac_ct_CC = @ac_ct_CC@
 ac_ct_CXX = @ac_ct_CXX@
-ac_ct_F77 = @ac_ct_F77@
+ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
 ac_ct_WINDRES = @ac_ct_WINDRES@
 am__include = @am__include@
 am__leading_dot = @am__leading_dot@
@@ -198,6 +207,7 @@
 libexecdir = @libexecdir@
 localedir = @localedir@
 localstatedir = @localstatedir@
+lt_ECHO = @lt_ECHO@
 mandir = @mandir@
 mkdir_p = @mkdir_p@
 oldincludedir = @oldincludedir@
@@ -232,14 +242,14 @@
 	@for dep in $?; do \
 	  case '$(am__configure_deps)' in \
 	    *$$dep*) \
-	      cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
-		&& exit 0; \
+	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+	        && { if test -f $@; then exit 0; else break; fi; }; \
 	      exit 1;; \
 	  esac; \
 	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign  drawstuff/src/Makefile'; \
-	cd $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign  drawstuff/src/Makefile
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign drawstuff/src/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign drawstuff/src/Makefile
 .PRECIOUS: Makefile
 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 	@case '$?' in \
@@ -257,6 +267,7 @@
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 $(ACLOCAL_M4):  $(am__aclocal_m4_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
 
 clean-noinstLTLIBRARIES:
 	-test -z "$(noinst_LTLIBRARIES)" || rm -f $(noinst_LTLIBRARIES)
@@ -282,21 +293,21 @@
 
 .cpp.o:
 @am__fastdepCXX_TRUE@	$(CXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCXX_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCXX_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCXX_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCXX_FALSE@	$(CXXCOMPILE) -c -o $@ $<
 
 .cpp.obj:
 @am__fastdepCXX_TRUE@	$(CXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
-@am__fastdepCXX_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCXX_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCXX_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCXX_FALSE@	$(CXXCOMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
 
 .cpp.lo:
 @am__fastdepCXX_TRUE@	$(LTCXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCXX_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
+@am__fastdepCXX_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
 @AMDEP_TRUE@@am__fastdepCXX_FALSE@	source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCXX_FALSE@	$(LTCXXCOMPILE) -c -o $@ $<
@@ -312,14 +323,14 @@
 	unique=`for i in $$list; do \
 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 	  done | \
-	  $(AWK) '{ files[$$0] = 1; nonemtpy = 1; } \
+	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
 	mkid -fID $$unique
 tags: TAGS
 
 TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
+	set x; \
 	here=`pwd`; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
@@ -327,29 +338,34 @@
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
 	  test -n "$$unique" || unique=$$empty_fix; \
-	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	    $$tags $$unique; \
+	  if test $$# -gt 0; then \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
 	fi
 ctags: CTAGS
 CTAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	test -z "$(CTAGS_ARGS)$$tags$$unique" \
+	test -z "$(CTAGS_ARGS)$$unique" \
 	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
-	     $$tags $$unique
+	     $$unique
 
 GTAGS:
 	here=`$(am__cd) $(top_builddir) && pwd` \
-	  && cd $(top_srcdir) \
-	  && gtags -i $(GTAGS_ARGS) $$here
+	  && $(am__cd) $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) "$$here"
 
 distclean-tags:
 	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
@@ -370,13 +386,17 @@
 	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
 	  if test -d $$d/$$file; then \
 	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
 	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 	    fi; \
-	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
 	  else \
-	    test -f $(distdir)/$$file \
-	    || cp -p $$d/$$file $(distdir)/$$file \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
 	    || exit 1; \
 	  fi; \
 	done
@@ -404,6 +424,7 @@
 
 distclean-generic:
 	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
 
 maintainer-clean-generic:
 	@echo "This command is intended for maintainers to use"
@@ -425,6 +446,8 @@
 
 html: html-am
 
+html-am:
+
 info: info-am
 
 info-am:
@@ -433,18 +456,28 @@
 
 install-dvi: install-dvi-am
 
+install-dvi-am:
+
 install-exec-am:
 
 install-html: install-html-am
 
+install-html-am:
+
 install-info: install-info-am
 
+install-info-am:
+
 install-man:
 
 install-pdf: install-pdf-am
 
+install-pdf-am:
+
 install-ps: install-ps-am
 
+install-ps-am:
+
 installcheck-am:
 
 maintainer-clean: maintainer-clean-am
@@ -482,6 +515,7 @@
 	mostlyclean-compile mostlyclean-generic mostlyclean-libtool \
 	pdf pdf-am ps ps-am tags uninstall uninstall-am
 
+
 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 # Otherwise a system limit (for SysV at least) may be exceeded.
 .NOEXPORT:
--- ode-0.11.orig/drawstuff/dstest/Makefile.in
+++ ode-0.11/drawstuff/dstest/Makefile.in
@@ -1,8 +1,9 @@
-# Makefile.in generated by automake 1.10.1 from Makefile.am.
+# Makefile.in generated by automake 1.11 from Makefile.am.
 # @configure_input@
 
 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
+# Inc.
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -16,8 +17,9 @@
 
 VPATH = @srcdir@
 pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
 install_sh_DATA = $(install_sh) -c -m 644
 install_sh_PROGRAM = $(install_sh) -c
@@ -44,6 +46,7 @@
 mkinstalldirs = $(install_sh) -d
 CONFIG_HEADER = $(top_builddir)/ode/src/config.h
 CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
 PROGRAMS = $(noinst_PROGRAMS)
 am_dstest_OBJECTS = dstest.$(OBJEXT)
 dstest_OBJECTS = $(am_dstest_OBJECTS)
@@ -55,6 +58,7 @@
 DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/ode/src
 depcomp = $(SHELL) $(top_srcdir)/depcomp
 am__depfiles_maybe = depfiles
+am__mv = mv -f
 CXXCOMPILE = $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
 	$(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS)
 LTCXXCOMPILE = $(LIBTOOL) --tag=CXX $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
@@ -92,15 +96,14 @@
 DEPDIR = @DEPDIR@
 DLLTOOL = @DLLTOOL@
 DSYMUTIL = @DSYMUTIL@
-ECHO = @ECHO@
+DUMPBIN = @DUMPBIN@
 ECHO_C = @ECHO_C@
 ECHO_N = @ECHO_N@
 ECHO_T = @ECHO_T@
 EGREP = @EGREP@
 EXEEXT = @EXEEXT@
 EXTRA_LIBTOOL_LDFLAGS = @EXTRA_LIBTOOL_LDFLAGS@
-F77 = @F77@
-FFLAGS = @FFLAGS@
+FGREP = @FGREP@
 GL_LIBS = @GL_LIBS@
 GREP = @GREP@
 INSTALL = @INSTALL@
@@ -108,26 +111,32 @@
 INSTALL_PROGRAM = @INSTALL_PROGRAM@
 INSTALL_SCRIPT = @INSTALL_SCRIPT@
 INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LD = @LD@
 LDFLAGS = @LDFLAGS@
 LIBOBJS = @LIBOBJS@
 LIBS = @LIBS@
 LIBSTDCXX = @LIBSTDCXX@
 LIBTOOL = @LIBTOOL@
+LIPO = @LIPO@
 LN_S = @LN_S@
 LTLIBOBJS = @LTLIBOBJS@
 MAKEINFO = @MAKEINFO@
 MKDIR_P = @MKDIR_P@
+NM = @NM@
 NMEDIT = @NMEDIT@
 OBJDUMP = @OBJDUMP@
 OBJEXT = @OBJEXT@
 ODE_PRECISION = @ODE_PRECISION@
 ODE_RELEASE = @ODE_RELEASE@
 ODE_VERSION_INFO = @ODE_VERSION_INFO@
+OTOOL = @OTOOL@
+OTOOL64 = @OTOOL64@
 PACKAGE = @PACKAGE@
 PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
 PACKAGE_NAME = @PACKAGE_NAME@
 PACKAGE_STRING = @PACKAGE_STRING@
 PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
 PACKAGE_VERSION = @PACKAGE_VERSION@
 PATH_SEPARATOR = @PATH_SEPARATOR@
 RANLIB = @RANLIB@
@@ -148,7 +157,7 @@
 abs_top_srcdir = @abs_top_srcdir@
 ac_ct_CC = @ac_ct_CC@
 ac_ct_CXX = @ac_ct_CXX@
-ac_ct_F77 = @ac_ct_F77@
+ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
 ac_ct_WINDRES = @ac_ct_WINDRES@
 am__include = @am__include@
 am__leading_dot = @am__leading_dot@
@@ -180,6 +189,7 @@
 libexecdir = @libexecdir@
 localedir = @localedir@
 localstatedir = @localstatedir@
+lt_ECHO = @lt_ECHO@
 mandir = @mandir@
 mkdir_p = @mkdir_p@
 oldincludedir = @oldincludedir@
@@ -208,14 +218,14 @@
 	@for dep in $?; do \
 	  case '$(am__configure_deps)' in \
 	    *$$dep*) \
-	      cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
-		&& exit 0; \
+	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+	        && { if test -f $@; then exit 0; else break; fi; }; \
 	      exit 1;; \
 	  esac; \
 	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign  drawstuff/dstest/Makefile'; \
-	cd $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign  drawstuff/dstest/Makefile
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign drawstuff/dstest/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign drawstuff/dstest/Makefile
 .PRECIOUS: Makefile
 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 	@case '$?' in \
@@ -233,13 +243,16 @@
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 $(ACLOCAL_M4):  $(am__aclocal_m4_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
 
 clean-noinstPROGRAMS:
-	@list='$(noinst_PROGRAMS)'; for p in $$list; do \
-	  f=`echo $$p|sed 's/$(EXEEXT)$$//'`; \
-	  echo " rm -f $$p $$f"; \
-	  rm -f $$p $$f ; \
-	done
+	@list='$(noinst_PROGRAMS)'; test -n "$$list" || exit 0; \
+	echo " rm -f" $$list; \
+	rm -f $$list || exit $$?; \
+	test -n "$(EXEEXT)" || exit 0; \
+	list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
+	echo " rm -f" $$list; \
+	rm -f $$list
 dstest$(EXEEXT): $(dstest_OBJECTS) $(dstest_DEPENDENCIES) 
 	@rm -f dstest$(EXEEXT)
 	$(CXXLINK) $(dstest_OBJECTS) $(dstest_LDADD) $(LIBS)
@@ -254,21 +267,21 @@
 
 .cpp.o:
 @am__fastdepCXX_TRUE@	$(CXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCXX_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCXX_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCXX_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCXX_FALSE@	$(CXXCOMPILE) -c -o $@ $<
 
 .cpp.obj:
 @am__fastdepCXX_TRUE@	$(CXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
-@am__fastdepCXX_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCXX_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCXX_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCXX_FALSE@	$(CXXCOMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
 
 .cpp.lo:
 @am__fastdepCXX_TRUE@	$(LTCXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCXX_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
+@am__fastdepCXX_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
 @AMDEP_TRUE@@am__fastdepCXX_FALSE@	source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCXX_FALSE@	$(LTCXXCOMPILE) -c -o $@ $<
@@ -284,14 +297,14 @@
 	unique=`for i in $$list; do \
 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 	  done | \
-	  $(AWK) '{ files[$$0] = 1; nonemtpy = 1; } \
+	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
 	mkid -fID $$unique
 tags: TAGS
 
 TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
+	set x; \
 	here=`pwd`; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
@@ -299,29 +312,34 @@
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
 	  test -n "$$unique" || unique=$$empty_fix; \
-	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	    $$tags $$unique; \
+	  if test $$# -gt 0; then \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
 	fi
 ctags: CTAGS
 CTAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	test -z "$(CTAGS_ARGS)$$tags$$unique" \
+	test -z "$(CTAGS_ARGS)$$unique" \
 	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
-	     $$tags $$unique
+	     $$unique
 
 GTAGS:
 	here=`$(am__cd) $(top_builddir) && pwd` \
-	  && cd $(top_srcdir) \
-	  && gtags -i $(GTAGS_ARGS) $$here
+	  && $(am__cd) $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) "$$here"
 
 distclean-tags:
 	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
@@ -342,13 +360,17 @@
 	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
 	  if test -d $$d/$$file; then \
 	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
 	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 	    fi; \
-	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
 	  else \
-	    test -f $(distdir)/$$file \
-	    || cp -p $$d/$$file $(distdir)/$$file \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
 	    || exit 1; \
 	  fi; \
 	done
@@ -376,6 +398,7 @@
 
 distclean-generic:
 	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
 
 maintainer-clean-generic:
 	@echo "This command is intended for maintainers to use"
@@ -397,6 +420,8 @@
 
 html: html-am
 
+html-am:
+
 info: info-am
 
 info-am:
@@ -405,18 +430,28 @@
 
 install-dvi: install-dvi-am
 
+install-dvi-am:
+
 install-exec-am:
 
 install-html: install-html-am
 
+install-html-am:
+
 install-info: install-info-am
 
+install-info-am:
+
 install-man:
 
 install-pdf: install-pdf-am
 
+install-pdf-am:
+
 install-ps: install-ps-am
 
+install-ps-am:
+
 installcheck-am:
 
 maintainer-clean: maintainer-clean-am
@@ -457,6 +492,7 @@
 
 @WIN32_TRUE@resources.o: $(top_srcdir)/drawstuff/src/resources.rc $(top_srcdir)/drawstuff/src/resource.h
 @WIN32_TRUE@	@WINDRES@ $(top_srcdir)/drawstuff/src/resources.rc -o resources.o
+
 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 # Otherwise a system limit (for SysV at least) may be exceeded.
 .NOEXPORT:
--- ode-0.11.orig/GIMPACT/Makefile.in
+++ ode-0.11/GIMPACT/Makefile.in
@@ -1,8 +1,9 @@
-# Makefile.in generated by automake 1.10.1 from Makefile.am.
+# Makefile.in generated by automake 1.11 from Makefile.am.
 # @configure_input@
 
 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
+# Inc.
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -15,8 +16,9 @@
 @SET_MAKE@
 VPATH = @srcdir@
 pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
 install_sh_DATA = $(install_sh) -c -m 644
 install_sh_PROGRAM = $(install_sh) -c
@@ -40,6 +42,7 @@
 mkinstalldirs = $(install_sh) -d
 CONFIG_HEADER = $(top_builddir)/ode/src/config.h
 CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
 SOURCES =
 DIST_SOURCES =
 RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
@@ -51,10 +54,38 @@
 	ps-recursive uninstall-recursive
 RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
   distclean-recursive maintainer-clean-recursive
+AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
+	$(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
+	distdir
 ETAGS = etags
 CTAGS = ctags
 DIST_SUBDIRS = $(SUBDIRS)
 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+am__relativize = \
+  dir0=`pwd`; \
+  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
+  sed_rest='s,^[^/]*/*,,'; \
+  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
+  sed_butlast='s,/*[^/]*$$,,'; \
+  while test -n "$$dir1"; do \
+    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
+    if test "$$first" != "."; then \
+      if test "$$first" = ".."; then \
+        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
+        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
+      else \
+        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
+        if test "$$first2" = "$$first"; then \
+          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
+        else \
+          dir2="../$$dir2"; \
+        fi; \
+        dir0="$$dir0"/"$$first"; \
+      fi; \
+    fi; \
+    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
+  done; \
+  reldir="$$dir2"
 ACLOCAL = @ACLOCAL@
 ALLOCA = @ALLOCA@
 AMTAR = @AMTAR@
@@ -78,15 +109,14 @@
 DEPDIR = @DEPDIR@
 DLLTOOL = @DLLTOOL@
 DSYMUTIL = @DSYMUTIL@
-ECHO = @ECHO@
+DUMPBIN = @DUMPBIN@
 ECHO_C = @ECHO_C@
 ECHO_N = @ECHO_N@
 ECHO_T = @ECHO_T@
 EGREP = @EGREP@
 EXEEXT = @EXEEXT@
 EXTRA_LIBTOOL_LDFLAGS = @EXTRA_LIBTOOL_LDFLAGS@
-F77 = @F77@
-FFLAGS = @FFLAGS@
+FGREP = @FGREP@
 GL_LIBS = @GL_LIBS@
 GREP = @GREP@
 INSTALL = @INSTALL@
@@ -94,26 +124,32 @@
 INSTALL_PROGRAM = @INSTALL_PROGRAM@
 INSTALL_SCRIPT = @INSTALL_SCRIPT@
 INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LD = @LD@
 LDFLAGS = @LDFLAGS@
 LIBOBJS = @LIBOBJS@
 LIBS = @LIBS@
 LIBSTDCXX = @LIBSTDCXX@
 LIBTOOL = @LIBTOOL@
+LIPO = @LIPO@
 LN_S = @LN_S@
 LTLIBOBJS = @LTLIBOBJS@
 MAKEINFO = @MAKEINFO@
 MKDIR_P = @MKDIR_P@
+NM = @NM@
 NMEDIT = @NMEDIT@
 OBJDUMP = @OBJDUMP@
 OBJEXT = @OBJEXT@
 ODE_PRECISION = @ODE_PRECISION@
 ODE_RELEASE = @ODE_RELEASE@
 ODE_VERSION_INFO = @ODE_VERSION_INFO@
+OTOOL = @OTOOL@
+OTOOL64 = @OTOOL64@
 PACKAGE = @PACKAGE@
 PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
 PACKAGE_NAME = @PACKAGE_NAME@
 PACKAGE_STRING = @PACKAGE_STRING@
 PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
 PACKAGE_VERSION = @PACKAGE_VERSION@
 PATH_SEPARATOR = @PATH_SEPARATOR@
 RANLIB = @RANLIB@
@@ -134,7 +170,7 @@
 abs_top_srcdir = @abs_top_srcdir@
 ac_ct_CC = @ac_ct_CC@
 ac_ct_CXX = @ac_ct_CXX@
-ac_ct_F77 = @ac_ct_F77@
+ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
 ac_ct_WINDRES = @ac_ct_WINDRES@
 am__include = @am__include@
 am__leading_dot = @am__leading_dot@
@@ -166,6 +202,7 @@
 libexecdir = @libexecdir@
 localedir = @localedir@
 localstatedir = @localstatedir@
+lt_ECHO = @lt_ECHO@
 mandir = @mandir@
 mkdir_p = @mkdir_p@
 oldincludedir = @oldincludedir@
@@ -191,14 +228,14 @@
 	@for dep in $?; do \
 	  case '$(am__configure_deps)' in \
 	    *$$dep*) \
-	      cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
-		&& exit 0; \
+	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+	        && { if test -f $@; then exit 0; else break; fi; }; \
 	      exit 1;; \
 	  esac; \
 	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign  GIMPACT/Makefile'; \
-	cd $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign  GIMPACT/Makefile
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign GIMPACT/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign GIMPACT/Makefile
 .PRECIOUS: Makefile
 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 	@case '$?' in \
@@ -216,6 +253,7 @@
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 $(ACLOCAL_M4):  $(am__aclocal_m4_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
 
 mostlyclean-libtool:
 	-rm -f *.lo
@@ -247,7 +285,7 @@
 	  else \
 	    local_target="$$target"; \
 	  fi; \
-	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
 	  || eval $$failcom; \
 	done; \
 	if test "$$dot_seen" = "no"; then \
@@ -281,16 +319,16 @@
 	  else \
 	    local_target="$$target"; \
 	  fi; \
-	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
 	  || eval $$failcom; \
 	done && test -z "$$fail"
 tags-recursive:
 	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
+	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
 	done
 ctags-recursive:
 	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
+	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
 	done
 
 ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
@@ -298,14 +336,14 @@
 	unique=`for i in $$list; do \
 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 	  done | \
-	  $(AWK) '{ files[$$0] = 1; nonemtpy = 1; } \
+	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
 	mkid -fID $$unique
 tags: TAGS
 
 TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
+	set x; \
 	here=`pwd`; \
 	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
 	  include_option=--etags-include; \
@@ -317,7 +355,7 @@
 	list='$(SUBDIRS)'; for subdir in $$list; do \
 	  if test "$$subdir" = .; then :; else \
 	    test ! -f $$subdir/TAGS || \
-	      tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
+	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
 	  fi; \
 	done; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
@@ -326,29 +364,34 @@
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
 	  test -n "$$unique" || unique=$$empty_fix; \
-	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	    $$tags $$unique; \
+	  if test $$# -gt 0; then \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
 	fi
 ctags: CTAGS
 CTAGS: ctags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	test -z "$(CTAGS_ARGS)$$tags$$unique" \
+	test -z "$(CTAGS_ARGS)$$unique" \
 	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
-	     $$tags $$unique
+	     $$unique
 
 GTAGS:
 	here=`$(am__cd) $(top_builddir) && pwd` \
-	  && cd $(top_srcdir) \
-	  && gtags -i $(GTAGS_ARGS) $$here
+	  && $(am__cd) $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) "$$here"
 
 distclean-tags:
 	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
@@ -369,29 +412,44 @@
 	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
 	  if test -d $$d/$$file; then \
 	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
 	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 	    fi; \
-	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
 	  else \
-	    test -f $(distdir)/$$file \
-	    || cp -p $$d/$$file $(distdir)/$$file \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
 	    || exit 1; \
 	  fi; \
 	done
-	list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
 	  if test "$$subdir" = .; then :; else \
 	    test -d "$(distdir)/$$subdir" \
 	    || $(MKDIR_P) "$(distdir)/$$subdir" \
 	    || exit 1; \
-	    distdir=`$(am__cd) $(distdir) && pwd`; \
-	    top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
-	    (cd $$subdir && \
+	  fi; \
+	done
+	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+	  if test "$$subdir" = .; then :; else \
+	    dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
+	    $(am__relativize); \
+	    new_distdir=$$reldir; \
+	    dir1=$$subdir; dir2="$(top_distdir)"; \
+	    $(am__relativize); \
+	    new_top_distdir=$$reldir; \
+	    echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
+	    echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
+	    ($(am__cd) $$subdir && \
 	      $(MAKE) $(AM_MAKEFLAGS) \
-	        top_distdir="$$top_distdir" \
-	        distdir="$$distdir/$$subdir" \
+	        top_distdir="$$new_top_distdir" \
+	        distdir="$$new_distdir" \
 		am__remove_distdir=: \
 		am__skip_length_check=: \
+		am__skip_mode_fix=: \
 	        distdir) \
 	      || exit 1; \
 	  fi; \
@@ -421,6 +479,7 @@
 
 distclean-generic:
 	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
 
 maintainer-clean-generic:
 	@echo "This command is intended for maintainers to use"
@@ -439,6 +498,8 @@
 
 html: html-recursive
 
+html-am:
+
 info: info-recursive
 
 info-am:
@@ -447,18 +508,28 @@
 
 install-dvi: install-dvi-recursive
 
+install-dvi-am:
+
 install-exec-am:
 
 install-html: install-html-recursive
 
+install-html-am:
+
 install-info: install-info-recursive
 
+install-info-am:
+
 install-man:
 
 install-pdf: install-pdf-recursive
 
+install-pdf-am:
+
 install-ps: install-ps-recursive
 
+install-ps-am:
+
 installcheck-am:
 
 maintainer-clean: maintainer-clean-recursive
@@ -479,8 +550,8 @@
 
 uninstall-am:
 
-.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) install-am \
-	install-strip
+.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) ctags-recursive \
+	install-am install-strip tags-recursive
 
 .PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
 	all all-am check check-am clean clean-generic clean-libtool \
@@ -496,6 +567,7 @@
 	mostlyclean-libtool pdf pdf-am ps ps-am tags tags-recursive \
 	uninstall uninstall-am
 
+
 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 # Otherwise a system limit (for SysV at least) may be exceeded.
 .NOEXPORT:
--- ode-0.11.orig/GIMPACT/src/Makefile.in
+++ ode-0.11/GIMPACT/src/Makefile.in
@@ -1,8 +1,9 @@
-# Makefile.in generated by automake 1.10.1 from Makefile.am.
+# Makefile.in generated by automake 1.11 from Makefile.am.
 # @configure_input@
 
 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
+# Inc.
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -16,8 +17,9 @@
 
 VPATH = @srcdir@
 pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
 install_sh_DATA = $(install_sh) -c -m 644
 install_sh_PROGRAM = $(install_sh) -c
@@ -41,6 +43,7 @@
 mkinstalldirs = $(install_sh) -d
 CONFIG_HEADER = $(top_builddir)/ode/src/config.h
 CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
 LTLIBRARIES = $(noinst_LTLIBRARIES)
 libGIMPACT_la_LIBADD =
 am_libGIMPACT_la_OBJECTS = gim_boxpruning.lo gim_contact.lo \
@@ -52,6 +55,7 @@
 DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/ode/src
 depcomp = $(SHELL) $(top_srcdir)/depcomp
 am__depfiles_maybe = depfiles
+am__mv = mv -f
 CXXCOMPILE = $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
 	$(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS)
 LTCXXCOMPILE = $(LIBTOOL) --tag=CXX $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
@@ -89,15 +93,14 @@
 DEPDIR = @DEPDIR@
 DLLTOOL = @DLLTOOL@
 DSYMUTIL = @DSYMUTIL@
-ECHO = @ECHO@
+DUMPBIN = @DUMPBIN@
 ECHO_C = @ECHO_C@
 ECHO_N = @ECHO_N@
 ECHO_T = @ECHO_T@
 EGREP = @EGREP@
 EXEEXT = @EXEEXT@
 EXTRA_LIBTOOL_LDFLAGS = @EXTRA_LIBTOOL_LDFLAGS@
-F77 = @F77@
-FFLAGS = @FFLAGS@
+FGREP = @FGREP@
 GL_LIBS = @GL_LIBS@
 GREP = @GREP@
 INSTALL = @INSTALL@
@@ -105,26 +108,32 @@
 INSTALL_PROGRAM = @INSTALL_PROGRAM@
 INSTALL_SCRIPT = @INSTALL_SCRIPT@
 INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LD = @LD@
 LDFLAGS = @LDFLAGS@
 LIBOBJS = @LIBOBJS@
 LIBS = @LIBS@
 LIBSTDCXX = @LIBSTDCXX@
 LIBTOOL = @LIBTOOL@
+LIPO = @LIPO@
 LN_S = @LN_S@
 LTLIBOBJS = @LTLIBOBJS@
 MAKEINFO = @MAKEINFO@
 MKDIR_P = @MKDIR_P@
+NM = @NM@
 NMEDIT = @NMEDIT@
 OBJDUMP = @OBJDUMP@
 OBJEXT = @OBJEXT@
 ODE_PRECISION = @ODE_PRECISION@
 ODE_RELEASE = @ODE_RELEASE@
 ODE_VERSION_INFO = @ODE_VERSION_INFO@
+OTOOL = @OTOOL@
+OTOOL64 = @OTOOL64@
 PACKAGE = @PACKAGE@
 PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
 PACKAGE_NAME = @PACKAGE_NAME@
 PACKAGE_STRING = @PACKAGE_STRING@
 PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
 PACKAGE_VERSION = @PACKAGE_VERSION@
 PATH_SEPARATOR = @PATH_SEPARATOR@
 RANLIB = @RANLIB@
@@ -145,7 +154,7 @@
 abs_top_srcdir = @abs_top_srcdir@
 ac_ct_CC = @ac_ct_CC@
 ac_ct_CXX = @ac_ct_CXX@
-ac_ct_F77 = @ac_ct_F77@
+ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
 ac_ct_WINDRES = @ac_ct_WINDRES@
 am__include = @am__include@
 am__leading_dot = @am__leading_dot@
@@ -177,6 +186,7 @@
 libexecdir = @libexecdir@
 localedir = @localedir@
 localstatedir = @localstatedir@
+lt_ECHO = @lt_ECHO@
 mandir = @mandir@
 mkdir_p = @mkdir_p@
 oldincludedir = @oldincludedir@
@@ -218,14 +228,14 @@
 	@for dep in $?; do \
 	  case '$(am__configure_deps)' in \
 	    *$$dep*) \
-	      cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
-		&& exit 0; \
+	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+	        && { if test -f $@; then exit 0; else break; fi; }; \
 	      exit 1;; \
 	  esac; \
 	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign  GIMPACT/src/Makefile'; \
-	cd $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign  GIMPACT/src/Makefile
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign GIMPACT/src/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign GIMPACT/src/Makefile
 .PRECIOUS: Makefile
 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 	@case '$?' in \
@@ -243,6 +253,7 @@
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 $(ACLOCAL_M4):  $(am__aclocal_m4_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
 
 clean-noinstLTLIBRARIES:
 	-test -z "$(noinst_LTLIBRARIES)" || rm -f $(noinst_LTLIBRARIES)
@@ -275,21 +286,21 @@
 
 .cpp.o:
 @am__fastdepCXX_TRUE@	$(CXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCXX_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCXX_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCXX_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCXX_FALSE@	$(CXXCOMPILE) -c -o $@ $<
 
 .cpp.obj:
 @am__fastdepCXX_TRUE@	$(CXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
-@am__fastdepCXX_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCXX_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCXX_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCXX_FALSE@	$(CXXCOMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
 
 .cpp.lo:
 @am__fastdepCXX_TRUE@	$(LTCXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCXX_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
+@am__fastdepCXX_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
 @AMDEP_TRUE@@am__fastdepCXX_FALSE@	source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCXX_FALSE@	$(LTCXXCOMPILE) -c -o $@ $<
@@ -305,14 +316,14 @@
 	unique=`for i in $$list; do \
 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 	  done | \
-	  $(AWK) '{ files[$$0] = 1; nonemtpy = 1; } \
+	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
 	mkid -fID $$unique
 tags: TAGS
 
 TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
+	set x; \
 	here=`pwd`; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
@@ -320,29 +331,34 @@
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
 	  test -n "$$unique" || unique=$$empty_fix; \
-	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	    $$tags $$unique; \
+	  if test $$# -gt 0; then \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
 	fi
 ctags: CTAGS
 CTAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	test -z "$(CTAGS_ARGS)$$tags$$unique" \
+	test -z "$(CTAGS_ARGS)$$unique" \
 	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
-	     $$tags $$unique
+	     $$unique
 
 GTAGS:
 	here=`$(am__cd) $(top_builddir) && pwd` \
-	  && cd $(top_srcdir) \
-	  && gtags -i $(GTAGS_ARGS) $$here
+	  && $(am__cd) $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) "$$here"
 
 distclean-tags:
 	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
@@ -363,13 +379,17 @@
 	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
 	  if test -d $$d/$$file; then \
 	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
 	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 	    fi; \
-	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
 	  else \
-	    test -f $(distdir)/$$file \
-	    || cp -p $$d/$$file $(distdir)/$$file \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
 	    || exit 1; \
 	  fi; \
 	done
@@ -397,6 +417,7 @@
 
 distclean-generic:
 	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
 
 maintainer-clean-generic:
 	@echo "This command is intended for maintainers to use"
@@ -418,6 +439,8 @@
 
 html: html-am
 
+html-am:
+
 info: info-am
 
 info-am:
@@ -426,18 +449,28 @@
 
 install-dvi: install-dvi-am
 
+install-dvi-am:
+
 install-exec-am:
 
 install-html: install-html-am
 
+install-html-am:
+
 install-info: install-info-am
 
+install-info-am:
+
 install-man:
 
 install-pdf: install-pdf-am
 
+install-pdf-am:
+
 install-ps: install-ps-am
 
+install-ps-am:
+
 installcheck-am:
 
 maintainer-clean: maintainer-clean-am
@@ -475,6 +508,7 @@
 	mostlyclean-compile mostlyclean-generic mostlyclean-libtool \
 	pdf pdf-am ps ps-am tags uninstall uninstall-am
 
+
 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 # Otherwise a system limit (for SysV at least) may be exceeded.
 .NOEXPORT:
--- ode-0.11.orig/GIMPACT/include/Makefile.in
+++ ode-0.11/GIMPACT/include/Makefile.in
@@ -1,8 +1,9 @@
-# Makefile.in generated by automake 1.10.1 from Makefile.am.
+# Makefile.in generated by automake 1.11 from Makefile.am.
 # @configure_input@
 
 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
+# Inc.
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -15,8 +16,9 @@
 @SET_MAKE@
 VPATH = @srcdir@
 pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
 install_sh_DATA = $(install_sh) -c -m 644
 install_sh_PROGRAM = $(install_sh) -c
@@ -40,6 +42,7 @@
 mkinstalldirs = $(install_sh) -d
 CONFIG_HEADER = $(top_builddir)/ode/src/config.h
 CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
 SOURCES =
 DIST_SOURCES =
 RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
@@ -51,10 +54,38 @@
 	ps-recursive uninstall-recursive
 RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
   distclean-recursive maintainer-clean-recursive
+AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
+	$(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
+	distdir
 ETAGS = etags
 CTAGS = ctags
 DIST_SUBDIRS = $(SUBDIRS)
 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+am__relativize = \
+  dir0=`pwd`; \
+  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
+  sed_rest='s,^[^/]*/*,,'; \
+  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
+  sed_butlast='s,/*[^/]*$$,,'; \
+  while test -n "$$dir1"; do \
+    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
+    if test "$$first" != "."; then \
+      if test "$$first" = ".."; then \
+        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
+        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
+      else \
+        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
+        if test "$$first2" = "$$first"; then \
+          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
+        else \
+          dir2="../$$dir2"; \
+        fi; \
+        dir0="$$dir0"/"$$first"; \
+      fi; \
+    fi; \
+    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
+  done; \
+  reldir="$$dir2"
 ACLOCAL = @ACLOCAL@
 ALLOCA = @ALLOCA@
 AMTAR = @AMTAR@
@@ -78,15 +109,14 @@
 DEPDIR = @DEPDIR@
 DLLTOOL = @DLLTOOL@
 DSYMUTIL = @DSYMUTIL@
-ECHO = @ECHO@
+DUMPBIN = @DUMPBIN@
 ECHO_C = @ECHO_C@
 ECHO_N = @ECHO_N@
 ECHO_T = @ECHO_T@
 EGREP = @EGREP@
 EXEEXT = @EXEEXT@
 EXTRA_LIBTOOL_LDFLAGS = @EXTRA_LIBTOOL_LDFLAGS@
-F77 = @F77@
-FFLAGS = @FFLAGS@
+FGREP = @FGREP@
 GL_LIBS = @GL_LIBS@
 GREP = @GREP@
 INSTALL = @INSTALL@
@@ -94,26 +124,32 @@
 INSTALL_PROGRAM = @INSTALL_PROGRAM@
 INSTALL_SCRIPT = @INSTALL_SCRIPT@
 INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LD = @LD@
 LDFLAGS = @LDFLAGS@
 LIBOBJS = @LIBOBJS@
 LIBS = @LIBS@
 LIBSTDCXX = @LIBSTDCXX@
 LIBTOOL = @LIBTOOL@
+LIPO = @LIPO@
 LN_S = @LN_S@
 LTLIBOBJS = @LTLIBOBJS@
 MAKEINFO = @MAKEINFO@
 MKDIR_P = @MKDIR_P@
+NM = @NM@
 NMEDIT = @NMEDIT@
 OBJDUMP = @OBJDUMP@
 OBJEXT = @OBJEXT@
 ODE_PRECISION = @ODE_PRECISION@
 ODE_RELEASE = @ODE_RELEASE@
 ODE_VERSION_INFO = @ODE_VERSION_INFO@
+OTOOL = @OTOOL@
+OTOOL64 = @OTOOL64@
 PACKAGE = @PACKAGE@
 PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
 PACKAGE_NAME = @PACKAGE_NAME@
 PACKAGE_STRING = @PACKAGE_STRING@
 PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
 PACKAGE_VERSION = @PACKAGE_VERSION@
 PATH_SEPARATOR = @PATH_SEPARATOR@
 RANLIB = @RANLIB@
@@ -134,7 +170,7 @@
 abs_top_srcdir = @abs_top_srcdir@
 ac_ct_CC = @ac_ct_CC@
 ac_ct_CXX = @ac_ct_CXX@
-ac_ct_F77 = @ac_ct_F77@
+ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
 ac_ct_WINDRES = @ac_ct_WINDRES@
 am__include = @am__include@
 am__leading_dot = @am__leading_dot@
@@ -166,6 +202,7 @@
 libexecdir = @libexecdir@
 localedir = @localedir@
 localstatedir = @localstatedir@
+lt_ECHO = @lt_ECHO@
 mandir = @mandir@
 mkdir_p = @mkdir_p@
 oldincludedir = @oldincludedir@
@@ -190,14 +227,14 @@
 	@for dep in $?; do \
 	  case '$(am__configure_deps)' in \
 	    *$$dep*) \
-	      cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
-		&& exit 0; \
+	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+	        && { if test -f $@; then exit 0; else break; fi; }; \
 	      exit 1;; \
 	  esac; \
 	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign  GIMPACT/include/Makefile'; \
-	cd $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign  GIMPACT/include/Makefile
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign GIMPACT/include/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign GIMPACT/include/Makefile
 .PRECIOUS: Makefile
 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 	@case '$?' in \
@@ -215,6 +252,7 @@
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 $(ACLOCAL_M4):  $(am__aclocal_m4_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
 
 mostlyclean-libtool:
 	-rm -f *.lo
@@ -246,7 +284,7 @@
 	  else \
 	    local_target="$$target"; \
 	  fi; \
-	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
 	  || eval $$failcom; \
 	done; \
 	if test "$$dot_seen" = "no"; then \
@@ -280,16 +318,16 @@
 	  else \
 	    local_target="$$target"; \
 	  fi; \
-	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
 	  || eval $$failcom; \
 	done && test -z "$$fail"
 tags-recursive:
 	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
+	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
 	done
 ctags-recursive:
 	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
+	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
 	done
 
 ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
@@ -297,14 +335,14 @@
 	unique=`for i in $$list; do \
 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 	  done | \
-	  $(AWK) '{ files[$$0] = 1; nonemtpy = 1; } \
+	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
 	mkid -fID $$unique
 tags: TAGS
 
 TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
+	set x; \
 	here=`pwd`; \
 	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
 	  include_option=--etags-include; \
@@ -316,7 +354,7 @@
 	list='$(SUBDIRS)'; for subdir in $$list; do \
 	  if test "$$subdir" = .; then :; else \
 	    test ! -f $$subdir/TAGS || \
-	      tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
+	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
 	  fi; \
 	done; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
@@ -325,29 +363,34 @@
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
 	  test -n "$$unique" || unique=$$empty_fix; \
-	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	    $$tags $$unique; \
+	  if test $$# -gt 0; then \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
 	fi
 ctags: CTAGS
 CTAGS: ctags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	test -z "$(CTAGS_ARGS)$$tags$$unique" \
+	test -z "$(CTAGS_ARGS)$$unique" \
 	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
-	     $$tags $$unique
+	     $$unique
 
 GTAGS:
 	here=`$(am__cd) $(top_builddir) && pwd` \
-	  && cd $(top_srcdir) \
-	  && gtags -i $(GTAGS_ARGS) $$here
+	  && $(am__cd) $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) "$$here"
 
 distclean-tags:
 	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
@@ -368,29 +411,44 @@
 	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
 	  if test -d $$d/$$file; then \
 	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
 	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 	    fi; \
-	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
 	  else \
-	    test -f $(distdir)/$$file \
-	    || cp -p $$d/$$file $(distdir)/$$file \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
 	    || exit 1; \
 	  fi; \
 	done
-	list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
 	  if test "$$subdir" = .; then :; else \
 	    test -d "$(distdir)/$$subdir" \
 	    || $(MKDIR_P) "$(distdir)/$$subdir" \
 	    || exit 1; \
-	    distdir=`$(am__cd) $(distdir) && pwd`; \
-	    top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
-	    (cd $$subdir && \
+	  fi; \
+	done
+	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+	  if test "$$subdir" = .; then :; else \
+	    dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
+	    $(am__relativize); \
+	    new_distdir=$$reldir; \
+	    dir1=$$subdir; dir2="$(top_distdir)"; \
+	    $(am__relativize); \
+	    new_top_distdir=$$reldir; \
+	    echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
+	    echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
+	    ($(am__cd) $$subdir && \
 	      $(MAKE) $(AM_MAKEFLAGS) \
-	        top_distdir="$$top_distdir" \
-	        distdir="$$distdir/$$subdir" \
+	        top_distdir="$$new_top_distdir" \
+	        distdir="$$new_distdir" \
 		am__remove_distdir=: \
 		am__skip_length_check=: \
+		am__skip_mode_fix=: \
 	        distdir) \
 	      || exit 1; \
 	  fi; \
@@ -420,6 +478,7 @@
 
 distclean-generic:
 	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
 
 maintainer-clean-generic:
 	@echo "This command is intended for maintainers to use"
@@ -438,6 +497,8 @@
 
 html: html-recursive
 
+html-am:
+
 info: info-recursive
 
 info-am:
@@ -446,18 +507,28 @@
 
 install-dvi: install-dvi-recursive
 
+install-dvi-am:
+
 install-exec-am:
 
 install-html: install-html-recursive
 
+install-html-am:
+
 install-info: install-info-recursive
 
+install-info-am:
+
 install-man:
 
 install-pdf: install-pdf-recursive
 
+install-pdf-am:
+
 install-ps: install-ps-recursive
 
+install-ps-am:
+
 installcheck-am:
 
 maintainer-clean: maintainer-clean-recursive
@@ -478,8 +549,8 @@
 
 uninstall-am:
 
-.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) install-am \
-	install-strip
+.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) ctags-recursive \
+	install-am install-strip tags-recursive
 
 .PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
 	all all-am check check-am clean clean-generic clean-libtool \
@@ -495,6 +566,7 @@
 	mostlyclean-libtool pdf pdf-am ps ps-am tags tags-recursive \
 	uninstall uninstall-am
 
+
 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 # Otherwise a system limit (for SysV at least) may be exceeded.
 .NOEXPORT:
--- ode-0.11.orig/GIMPACT/include/GIMPACT/Makefile.in
+++ ode-0.11/GIMPACT/include/GIMPACT/Makefile.in
@@ -1,8 +1,9 @@
-# Makefile.in generated by automake 1.10.1 from Makefile.am.
+# Makefile.in generated by automake 1.11 from Makefile.am.
 # @configure_input@
 
 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
+# Inc.
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -16,8 +17,9 @@
 
 VPATH = @srcdir@
 pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
 install_sh_DATA = $(install_sh) -c -m 644
 install_sh_PROGRAM = $(install_sh) -c
@@ -42,6 +44,7 @@
 mkinstalldirs = $(install_sh) -d
 CONFIG_HEADER = $(top_builddir)/ode/src/config.h
 CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
 SOURCES =
 DIST_SOURCES =
 HEADERS = $(noinst_HEADERS)
@@ -71,15 +74,14 @@
 DEPDIR = @DEPDIR@
 DLLTOOL = @DLLTOOL@
 DSYMUTIL = @DSYMUTIL@
-ECHO = @ECHO@
+DUMPBIN = @DUMPBIN@
 ECHO_C = @ECHO_C@
 ECHO_N = @ECHO_N@
 ECHO_T = @ECHO_T@
 EGREP = @EGREP@
 EXEEXT = @EXEEXT@
 EXTRA_LIBTOOL_LDFLAGS = @EXTRA_LIBTOOL_LDFLAGS@
-F77 = @F77@
-FFLAGS = @FFLAGS@
+FGREP = @FGREP@
 GL_LIBS = @GL_LIBS@
 GREP = @GREP@
 INSTALL = @INSTALL@
@@ -87,26 +89,32 @@
 INSTALL_PROGRAM = @INSTALL_PROGRAM@
 INSTALL_SCRIPT = @INSTALL_SCRIPT@
 INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LD = @LD@
 LDFLAGS = @LDFLAGS@
 LIBOBJS = @LIBOBJS@
 LIBS = @LIBS@
 LIBSTDCXX = @LIBSTDCXX@
 LIBTOOL = @LIBTOOL@
+LIPO = @LIPO@
 LN_S = @LN_S@
 LTLIBOBJS = @LTLIBOBJS@
 MAKEINFO = @MAKEINFO@
 MKDIR_P = @MKDIR_P@
+NM = @NM@
 NMEDIT = @NMEDIT@
 OBJDUMP = @OBJDUMP@
 OBJEXT = @OBJEXT@
 ODE_PRECISION = @ODE_PRECISION@
 ODE_RELEASE = @ODE_RELEASE@
 ODE_VERSION_INFO = @ODE_VERSION_INFO@
+OTOOL = @OTOOL@
+OTOOL64 = @OTOOL64@
 PACKAGE = @PACKAGE@
 PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
 PACKAGE_NAME = @PACKAGE_NAME@
 PACKAGE_STRING = @PACKAGE_STRING@
 PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
 PACKAGE_VERSION = @PACKAGE_VERSION@
 PATH_SEPARATOR = @PATH_SEPARATOR@
 RANLIB = @RANLIB@
@@ -127,7 +135,7 @@
 abs_top_srcdir = @abs_top_srcdir@
 ac_ct_CC = @ac_ct_CC@
 ac_ct_CXX = @ac_ct_CXX@
-ac_ct_F77 = @ac_ct_F77@
+ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
 ac_ct_WINDRES = @ac_ct_WINDRES@
 am__include = @am__include@
 am__leading_dot = @am__leading_dot@
@@ -159,6 +167,7 @@
 libexecdir = @libexecdir@
 localedir = @localedir@
 localstatedir = @localstatedir@
+lt_ECHO = @lt_ECHO@
 mandir = @mandir@
 mkdir_p = @mkdir_p@
 oldincludedir = @oldincludedir@
@@ -188,14 +197,14 @@
 	@for dep in $?; do \
 	  case '$(am__configure_deps)' in \
 	    *$$dep*) \
-	      cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
-		&& exit 0; \
+	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+	        && { if test -f $@; then exit 0; else break; fi; }; \
 	      exit 1;; \
 	  esac; \
 	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign  GIMPACT/include/GIMPACT/Makefile'; \
-	cd $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign  GIMPACT/include/GIMPACT/Makefile
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign GIMPACT/include/GIMPACT/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign GIMPACT/include/GIMPACT/Makefile
 .PRECIOUS: Makefile
 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 	@case '$?' in \
@@ -213,6 +222,7 @@
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 $(ACLOCAL_M4):  $(am__aclocal_m4_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
 
 mostlyclean-libtool:
 	-rm -f *.lo
@@ -225,14 +235,14 @@
 	unique=`for i in $$list; do \
 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 	  done | \
-	  $(AWK) '{ files[$$0] = 1; nonemtpy = 1; } \
+	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
 	mkid -fID $$unique
 tags: TAGS
 
 TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
+	set x; \
 	here=`pwd`; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
@@ -240,29 +250,34 @@
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
 	  test -n "$$unique" || unique=$$empty_fix; \
-	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	    $$tags $$unique; \
+	  if test $$# -gt 0; then \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
 	fi
 ctags: CTAGS
 CTAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	test -z "$(CTAGS_ARGS)$$tags$$unique" \
+	test -z "$(CTAGS_ARGS)$$unique" \
 	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
-	     $$tags $$unique
+	     $$unique
 
 GTAGS:
 	here=`$(am__cd) $(top_builddir) && pwd` \
-	  && cd $(top_srcdir) \
-	  && gtags -i $(GTAGS_ARGS) $$here
+	  && $(am__cd) $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) "$$here"
 
 distclean-tags:
 	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
@@ -283,13 +298,17 @@
 	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
 	  if test -d $$d/$$file; then \
 	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
 	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 	    fi; \
-	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
 	  else \
-	    test -f $(distdir)/$$file \
-	    || cp -p $$d/$$file $(distdir)/$$file \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
 	    || exit 1; \
 	  fi; \
 	done
@@ -317,6 +336,7 @@
 
 distclean-generic:
 	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
 
 maintainer-clean-generic:
 	@echo "This command is intended for maintainers to use"
@@ -335,6 +355,8 @@
 
 html: html-am
 
+html-am:
+
 info: info-am
 
 info-am:
@@ -343,18 +365,28 @@
 
 install-dvi: install-dvi-am
 
+install-dvi-am:
+
 install-exec-am:
 
 install-html: install-html-am
 
+install-html-am:
+
 install-info: install-info-am
 
+install-info-am:
+
 install-man:
 
 install-pdf: install-pdf-am
 
+install-pdf-am:
+
 install-ps: install-ps-am
 
+install-ps-am:
+
 installcheck-am:
 
 maintainer-clean: maintainer-clean-am
@@ -390,6 +422,7 @@
 	mostlyclean-libtool pdf pdf-am ps ps-am tags uninstall \
 	uninstall-am
 
+
 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 # Otherwise a system limit (for SysV at least) may be exceeded.
 .NOEXPORT:
--- ode-0.11.orig/ou/configure
+++ ode-0.11/ou/configure
@@ -1,20 +1,22 @@
 #! /bin/sh
 # Guess values for system-dependent variables and create Makefiles.
-# Generated by GNU Autoconf 2.63 for ou 0.
+# Generated by GNU Autoconf 2.64 for ou 0.
 #
 # Report bugs to <oleh_derevenko@users.sourceforge.net>.
 #
 # Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
-# 2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
+# 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software
+# Foundation, Inc.
+#
 # This configure script is free software; the Free Software Foundation
 # gives unlimited permission to copy, distribute and modify it.
-## --------------------- ##
-## M4sh Initialization.  ##
-## --------------------- ##
+## -------------------- ##
+## M4sh Initialization. ##
+## -------------------- ##
 
 # Be more Bourne compatible
 DUALCASE=1; export DUALCASE # for MKS sh
-if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then :
   emulate sh
   NULLCMD=:
   # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
@@ -22,23 +24,15 @@
   alias -g '${1+"$@"}'='"$@"'
   setopt NO_GLOB_SUBST
 else
-  case `(set -o) 2>/dev/null` in
-  *posix*) set -o posix ;;
+  case `(set -o) 2>/dev/null` in #(
+  *posix*) :
+    set -o posix ;; #(
+  *) :
+     ;;
 esac
-
 fi
 
 
-
-
-# PATH needs CR
-# Avoid depending upon Character Ranges.
-as_cr_letters='abcdefghijklmnopqrstuvwxyz'
-as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
-as_cr_Letters=$as_cr_letters$as_cr_LETTERS
-as_cr_digits='0123456789'
-as_cr_alnum=$as_cr_Letters$as_cr_digits
-
 as_nl='
 '
 export as_nl
@@ -46,7 +40,13 @@
 as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
 as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
 as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
-if (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
+# Prefer a ksh shell builtin over an external printf program on Solaris,
+# but without wasting forks for bash or zsh.
+if test -z "$BASH_VERSION$ZSH_VERSION" \
+    && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then
+  as_echo='print -r --'
+  as_echo_n='print -rn --'
+elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
   as_echo='printf %s\n'
   as_echo_n='printf %s'
 else
@@ -57,7 +57,7 @@
     as_echo_body='eval expr "X$1" : "X\\(.*\\)"'
     as_echo_n_body='eval
       arg=$1;
-      case $arg in
+      case $arg in #(
       *"$as_nl"*)
 	expr "X$arg" : "X\\(.*\\)$as_nl";
 	arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
@@ -80,13 +80,6 @@
   }
 fi
 
-# Support unset when possible.
-if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
-  as_unset=unset
-else
-  as_unset=false
-fi
-
 
 # IFS
 # We need space, tab and new line, in precisely that order.  Quoting is
@@ -96,15 +89,15 @@
 IFS=" ""	$as_nl"
 
 # Find who we are.  Look in the path if we contain no directory separator.
-case $0 in
+case $0 in #((
   *[\\/]* ) as_myself=$0 ;;
   *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
 for as_dir in $PATH
 do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
-  test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
-done
+    test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
+  done
 IFS=$as_save_IFS
 
      ;;
@@ -116,12 +109,16 @@
 fi
 if test ! -f "$as_myself"; then
   $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
-  { (exit 1); exit 1; }
+  exit 1
 fi
 
-# Work around bugs in pre-3.0 UWIN ksh.
-for as_var in ENV MAIL MAILPATH
-do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
+# Unset variables that we do not need and which cause bugs (e.g. in
+# pre-3.0 UWIN ksh).  But do not cause bugs in bash 2.01; the "|| exit 1"
+# suppresses any "Segmentation fault" message there.  '((' could
+# trigger a bug in pdksh 5.2.14.
+for as_var in BASH_ENV ENV MAIL MAILPATH
+do eval test x\${$as_var+set} = xset \
+  && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || :
 done
 PS1='$ '
 PS2='> '
@@ -133,330 +130,300 @@
 LANGUAGE=C
 export LANGUAGE
 
-# Required to use basename.
-if expr a : '\(a\)' >/dev/null 2>&1 &&
-   test "X`expr 00001 : '.*\(...\)'`" = X001; then
-  as_expr=expr
-else
-  as_expr=false
-fi
-
-if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
-  as_basename=basename
-else
-  as_basename=false
-fi
-
-
-# Name of the executable.
-as_me=`$as_basename -- "$0" ||
-$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
-	 X"$0" : 'X\(//\)$' \| \
-	 X"$0" : 'X\(/\)' \| . 2>/dev/null ||
-$as_echo X/"$0" |
-    sed '/^.*\/\([^/][^/]*\)\/*$/{
-	    s//\1/
-	    q
-	  }
-	  /^X\/\(\/\/\)$/{
-	    s//\1/
-	    q
-	  }
-	  /^X\/\(\/\).*/{
-	    s//\1/
-	    q
-	  }
-	  s/.*/./; q'`
-
 # CDPATH.
-$as_unset CDPATH
-
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
 
 if test "x$CONFIG_SHELL" = x; then
-  if (eval ":") 2>/dev/null; then
-  as_have_required=yes
+  as_bourne_compatible="if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then :
+  emulate sh
+  NULLCMD=:
+  # Pre-4.2 versions of Zsh do word splitting on \${1+\"\$@\"}, which
+  # is contrary to our usage.  Disable this feature.
+  alias -g '\${1+\"\$@\"}'='\"\$@\"'
+  setopt NO_GLOB_SUBST
 else
-  as_have_required=no
+  case \`(set -o) 2>/dev/null\` in #(
+  *posix*) :
+    set -o posix ;; #(
+  *) :
+     ;;
+esac
 fi
-
-  if test $as_have_required = yes &&	 (eval ":
-(as_func_return () {
-  (exit \$1)
-}
-as_func_success () {
-  as_func_return 0
-}
-as_func_failure () {
-  as_func_return 1
-}
-as_func_ret_success () {
-  return 0
-}
-as_func_ret_failure () {
-  return 1
-}
+"
+  as_required="as_fn_return () { (exit \$1); }
+as_fn_success () { as_fn_return 0; }
+as_fn_failure () { as_fn_return 1; }
+as_fn_ret_success () { return 0; }
+as_fn_ret_failure () { return 1; }
 
 exitcode=0
-if as_func_success; then
-  :
-else
-  exitcode=1
-  echo as_func_success failed.
-fi
-
-if as_func_failure; then
-  exitcode=1
-  echo as_func_failure succeeded.
-fi
-
-if as_func_ret_success; then
-  :
-else
-  exitcode=1
-  echo as_func_ret_success failed.
-fi
-
-if as_func_ret_failure; then
-  exitcode=1
-  echo as_func_ret_failure succeeded.
-fi
-
-if ( set x; as_func_ret_success y && test x = \"\$1\" ); then
-  :
+as_fn_success || { exitcode=1; echo as_fn_success failed.; }
+as_fn_failure && { exitcode=1; echo as_fn_failure succeeded.; }
+as_fn_ret_success || { exitcode=1; echo as_fn_ret_success failed.; }
+as_fn_ret_failure && { exitcode=1; echo as_fn_ret_failure succeeded.; }
+if ( set x; as_fn_ret_success y && test x = \"\$1\" ); then :
+
+else
+  exitcode=1; echo positional parameters were not saved.
+fi
+test x\$exitcode = x0 || exit 1"
+  as_suggested="  as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_1a=\$LINENO
+  as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO
+  eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" &&
+  test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1
+test \$(( 1 + 1 )) = 2 || exit 1"
+  if (eval "$as_required") 2>/dev/null; then :
+  as_have_required=yes
 else
-  exitcode=1
-  echo positional parameters were not saved.
+  as_have_required=no
 fi
+  if test x$as_have_required = xyes && (eval "$as_suggested") 2>/dev/null; then :
 
-test \$exitcode = 0) || { (exit 1); exit 1; }
-
-(
-  as_lineno_1=\$LINENO
-  as_lineno_2=\$LINENO
-  test \"x\$as_lineno_1\" != \"x\$as_lineno_2\" &&
-  test \"x\`expr \$as_lineno_1 + 1\`\" = \"x\$as_lineno_2\") || { (exit 1); exit 1; }
-") 2> /dev/null; then
-  :
 else
-  as_candidate_shells=
-    as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+as_found=false
 for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
 do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
-  case $as_dir in
+  as_found=:
+  case $as_dir in #(
 	 /*)
 	   for as_base in sh bash ksh sh5; do
-	     as_candidate_shells="$as_candidate_shells $as_dir/$as_base"
+	     # Try only shells that exist, to save several forks.
+	     as_shell=$as_dir/$as_base
+	     if { test -f "$as_shell" || test -f "$as_shell.exe"; } &&
+		    { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$as_shell"; } 2>/dev/null; then :
+  CONFIG_SHELL=$as_shell as_have_required=yes
+		   if { $as_echo "$as_bourne_compatible""$as_suggested" | as_run=a "$as_shell"; } 2>/dev/null; then :
+  break 2
+fi
+fi
 	   done;;
        esac
+  as_found=false
 done
+$as_found || { if { test -f "$SHELL" || test -f "$SHELL.exe"; } &&
+	      { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$SHELL"; } 2>/dev/null; then :
+  CONFIG_SHELL=$SHELL as_have_required=yes
+fi; }
 IFS=$as_save_IFS
 
 
-      for as_shell in $as_candidate_shells $SHELL; do
-	 # Try only shells that exist, to save several forks.
-	 if { test -f "$as_shell" || test -f "$as_shell.exe"; } &&
-		{ ("$as_shell") 2> /dev/null <<\_ASEOF
-if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
-  emulate sh
-  NULLCMD=:
-  # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
-  # is contrary to our usage.  Disable this feature.
-  alias -g '${1+"$@"}'='"$@"'
-  setopt NO_GLOB_SUBST
-else
-  case `(set -o) 2>/dev/null` in
-  *posix*) set -o posix ;;
-esac
-
-fi
-
-
-:
-_ASEOF
-}; then
-  CONFIG_SHELL=$as_shell
-	       as_have_required=yes
-	       if { "$as_shell" 2> /dev/null <<\_ASEOF
-if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
-  emulate sh
-  NULLCMD=:
-  # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
-  # is contrary to our usage.  Disable this feature.
-  alias -g '${1+"$@"}'='"$@"'
-  setopt NO_GLOB_SUBST
-else
-  case `(set -o) 2>/dev/null` in
-  *posix*) set -o posix ;;
-esac
-
-fi
-
-
-:
-(as_func_return () {
-  (exit $1)
-}
-as_func_success () {
-  as_func_return 0
-}
-as_func_failure () {
-  as_func_return 1
-}
-as_func_ret_success () {
-  return 0
-}
-as_func_ret_failure () {
-  return 1
-}
-
-exitcode=0
-if as_func_success; then
-  :
-else
-  exitcode=1
-  echo as_func_success failed.
-fi
-
-if as_func_failure; then
-  exitcode=1
-  echo as_func_failure succeeded.
-fi
-
-if as_func_ret_success; then
-  :
-else
-  exitcode=1
-  echo as_func_ret_success failed.
-fi
-
-if as_func_ret_failure; then
-  exitcode=1
-  echo as_func_ret_failure succeeded.
-fi
-
-if ( set x; as_func_ret_success y && test x = "$1" ); then
-  :
-else
-  exitcode=1
-  echo positional parameters were not saved.
-fi
-
-test $exitcode = 0) || { (exit 1); exit 1; }
-
-(
-  as_lineno_1=$LINENO
-  as_lineno_2=$LINENO
-  test "x$as_lineno_1" != "x$as_lineno_2" &&
-  test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2") || { (exit 1); exit 1; }
-
-_ASEOF
-}; then
-  break
-fi
-
-fi
-
-      done
-
-      if test "x$CONFIG_SHELL" != x; then
-  for as_var in BASH_ENV ENV
-	do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
-	done
+      if test "x$CONFIG_SHELL" != x; then :
+  # We cannot yet assume a decent shell, so we have to provide a
+	# neutralization value for shells without unset; and this also
+	# works around shells that cannot unset nonexistent variables.
+	BASH_ENV=/dev/null
+	ENV=/dev/null
+	(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV
 	export CONFIG_SHELL
 	exec "$CONFIG_SHELL" "$as_myself" ${1+"$@"}
 fi
 
-
-    if test $as_have_required = no; then
-  echo This script requires a shell more modern than all the
-      echo shells that I found on your system.  Please install a
-      echo modern shell, or manually run the script under such a
-      echo shell if you do have one.
-      { (exit 1); exit 1; }
+    if test x$as_have_required = xno; then :
+  $as_echo "$0: This script requires a shell more modern than all"
+  $as_echo "$0: the shells that I found on your system."
+  if test x${ZSH_VERSION+set} = xset ; then
+    $as_echo "$0: In particular, zsh $ZSH_VERSION has bugs and should"
+    $as_echo "$0: be upgraded to zsh 4.3.4 or later."
+  else
+    $as_echo "$0: Please tell bug-autoconf@gnu.org and
+$0: oleh_derevenko@users.sourceforge.net about your system,
+$0: including any error possibly output before this
+$0: message. Then install a modern shell, or manually run
+$0: the script under such a shell if you do have one."
+  fi
+  exit 1
 fi
-
-
 fi
-
 fi
+SHELL=${CONFIG_SHELL-/bin/sh}
+export SHELL
+# Unset more variables known to interfere with behavior of common tools.
+CLICOLOR_FORCE= GREP_OPTIONS=
+unset CLICOLOR_FORCE GREP_OPTIONS
+
+## --------------------- ##
+## M4sh Shell Functions. ##
+## --------------------- ##
+# as_fn_unset VAR
+# ---------------
+# Portably unset VAR.
+as_fn_unset ()
+{
+  { eval $1=; unset $1;}
+}
+as_unset=as_fn_unset
+
+# as_fn_set_status STATUS
+# -----------------------
+# Set $? to STATUS, without forking.
+as_fn_set_status ()
+{
+  return $1
+} # as_fn_set_status
+
+# as_fn_exit STATUS
+# -----------------
+# Exit the shell with STATUS, even in a "trap 0" or "set -e" context.
+as_fn_exit ()
+{
+  set +e
+  as_fn_set_status $1
+  exit $1
+} # as_fn_exit
+
+# as_fn_mkdir_p
+# -------------
+# Create "$as_dir" as a directory, including parents if necessary.
+as_fn_mkdir_p ()
+{
 
+  case $as_dir in #(
+  -*) as_dir=./$as_dir;;
+  esac
+  test -d "$as_dir" || eval $as_mkdir_p || {
+    as_dirs=
+    while :; do
+      case $as_dir in #(
+      *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
+      *) as_qdir=$as_dir;;
+      esac
+      as_dirs="'$as_qdir' $as_dirs"
+      as_dir=`$as_dirname -- "$as_dir" ||
+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$as_dir" : 'X\(//\)[^/]' \| \
+	 X"$as_dir" : 'X\(//\)$' \| \
+	 X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$as_dir" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+      test -d "$as_dir" && break
+    done
+    test -z "$as_dirs" || eval "mkdir $as_dirs"
+  } || test -d "$as_dir" || as_fn_error "cannot create directory $as_dir"
 
 
-(eval "as_func_return () {
-  (exit \$1)
-}
-as_func_success () {
-  as_func_return 0
-}
-as_func_failure () {
-  as_func_return 1
-}
-as_func_ret_success () {
-  return 0
-}
-as_func_ret_failure () {
-  return 1
-}
+} # as_fn_mkdir_p
+# as_fn_append VAR VALUE
+# ----------------------
+# Append the text in VALUE to the end of the definition contained in VAR. Take
+# advantage of any shell optimizations that allow amortized linear growth over
+# repeated appends, instead of the typical quadratic growth present in naive
+# implementations.
+if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then :
+  eval 'as_fn_append ()
+  {
+    eval $1+=\$2
+  }'
+else
+  as_fn_append ()
+  {
+    eval $1=\$$1\$2
+  }
+fi # as_fn_append
 
-exitcode=0
-if as_func_success; then
-  :
+# as_fn_arith ARG...
+# ------------------
+# Perform arithmetic evaluation on the ARGs, and store the result in the
+# global $as_val. Take advantage of shells that can avoid forks. The arguments
+# must be portable across $(()) and expr.
+if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then :
+  eval 'as_fn_arith ()
+  {
+    as_val=$(( $* ))
+  }'
 else
-  exitcode=1
-  echo as_func_success failed.
-fi
+  as_fn_arith ()
+  {
+    as_val=`expr "$@" || test $? -eq 1`
+  }
+fi # as_fn_arith
 
-if as_func_failure; then
-  exitcode=1
-  echo as_func_failure succeeded.
-fi
 
-if as_func_ret_success; then
-  :
+# as_fn_error ERROR [LINENO LOG_FD]
+# ---------------------------------
+# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
+# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
+# script with status $?, using 1 if that was 0.
+as_fn_error ()
+{
+  as_status=$?; test $as_status -eq 0 && as_status=1
+  if test "$3"; then
+    as_lineno=${as_lineno-"$2"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+    $as_echo "$as_me:${as_lineno-$LINENO}: error: $1" >&$3
+  fi
+  $as_echo "$as_me: error: $1" >&2
+  as_fn_exit $as_status
+} # as_fn_error
+
+if expr a : '\(a\)' >/dev/null 2>&1 &&
+   test "X`expr 00001 : '.*\(...\)'`" = X001; then
+  as_expr=expr
 else
-  exitcode=1
-  echo as_func_ret_success failed.
+  as_expr=false
 fi
 
-if as_func_ret_failure; then
-  exitcode=1
-  echo as_func_ret_failure succeeded.
+if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
+  as_basename=basename
+else
+  as_basename=false
 fi
 
-if ( set x; as_func_ret_success y && test x = \"\$1\" ); then
-  :
+if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
+  as_dirname=dirname
 else
-  exitcode=1
-  echo positional parameters were not saved.
+  as_dirname=false
 fi
 
-test \$exitcode = 0") || {
-  echo No shell found that supports shell functions.
-  echo Please tell bug-autoconf@gnu.org about your system,
-  echo including any error possibly output before this message.
-  echo This can help us improve future autoconf versions.
-  echo Configuration will now proceed without shell functions.
-}
+as_me=`$as_basename -- "$0" ||
+$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
+	 X"$0" : 'X\(//\)$' \| \
+	 X"$0" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X/"$0" |
+    sed '/^.*\/\([^/][^/]*\)\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\/\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\/\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
 
+# Avoid depending upon Character Ranges.
+as_cr_letters='abcdefghijklmnopqrstuvwxyz'
+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
+as_cr_Letters=$as_cr_letters$as_cr_LETTERS
+as_cr_digits='0123456789'
+as_cr_alnum=$as_cr_Letters$as_cr_digits
 
 
-  as_lineno_1=$LINENO
-  as_lineno_2=$LINENO
-  test "x$as_lineno_1" != "x$as_lineno_2" &&
-  test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || {
-
-  # Create $as_me.lineno as a copy of $as_myself, but with $LINENO
-  # uniformly replaced by the line number.  The first 'sed' inserts a
-  # line-number line after each line using $LINENO; the second 'sed'
-  # does the real work.  The second script uses 'N' to pair each
-  # line-number line with the line containing $LINENO, and appends
-  # trailing '-' during substitution so that $LINENO is not a special
-  # case at line end.
-  # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
-  # scripts with optimization help from Paolo Bonzini.  Blame Lee
-  # E. McMahon (1931-1989) for sed's syntax.  :-)
+  as_lineno_1=$LINENO as_lineno_1a=$LINENO
+  as_lineno_2=$LINENO as_lineno_2a=$LINENO
+  eval 'test "x$as_lineno_1'$as_run'" != "x$as_lineno_2'$as_run'" &&
+  test "x`expr $as_lineno_1'$as_run' + 1`" = "x$as_lineno_2'$as_run'"' || {
+  # Blame Lee E. McMahon (1931-1989) for sed's syntax.  :-)
   sed -n '
     p
     /[$]LINENO/=
@@ -473,8 +440,7 @@
       s/-\n.*//
     ' >$as_me.lineno &&
   chmod +x "$as_me.lineno" ||
-    { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2
-   { (exit 1); exit 1; }; }
+    { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2; as_fn_exit 1; }
 
   # Don't try to exec as it changes $[0], causing all sort of problems
   # (the dirname of $[0] is not the place where we might find the
@@ -484,29 +450,18 @@
   exit
 }
 
-
-if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
-  as_dirname=dirname
-else
-  as_dirname=false
-fi
-
 ECHO_C= ECHO_N= ECHO_T=
-case `echo -n x` in
+case `echo -n x` in #(((((
 -n*)
-  case `echo 'x\c'` in
+  case `echo 'xy\c'` in
   *c*) ECHO_T='	';;	# ECHO_T is single tab character.
-  *)   ECHO_C='\c';;
+  xy)  ECHO_C='\c';;
+  *)   echo `echo ksh88 bug on AIX 6.1` > /dev/null
+       ECHO_T='	';;
   esac;;
 *)
   ECHO_N='-n';;
 esac
-if expr a : '\(a\)' >/dev/null 2>&1 &&
-   test "X`expr 00001 : '.*\(...\)'`" = X001; then
-  as_expr=expr
-else
-  as_expr=false
-fi
 
 rm -f conf$$ conf$$.exe conf$$.file
 if test -d conf$$.dir; then
@@ -536,7 +491,7 @@
 rmdir conf$$.dir 2>/dev/null
 
 if mkdir -p . 2>/dev/null; then
-  as_mkdir_p=:
+  as_mkdir_p='mkdir -p "$as_dir"'
 else
   test -d ./-p && rmdir ./-p
   as_mkdir_p=false
@@ -555,10 +510,10 @@
       if test -d "$1"; then
 	test -d "$1/.";
       else
-	case $1 in
+	case $1 in #(
 	-*)set "./$1";;
 	esac;
-	case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in
+	case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in #((
 	???[sx]*):;;*)false;;esac;fi
     '\'' sh
   '
@@ -573,26 +528,25 @@
 
 
 
-
 # Check that we are running under the correct shell.
 SHELL=${CONFIG_SHELL-/bin/sh}
 
-case X$ECHO in
+case X$lt_ECHO in
 X*--fallback-echo)
   # Remove one level of quotation (which was required for Make).
-  ECHO=`echo "$ECHO" | sed 's,\\\\\$\\$0,'$0','`
+  ECHO=`echo "$lt_ECHO" | sed 's,\\\\\$\\$0,'$0','`
   ;;
 esac
 
-echo=${ECHO-echo}
+ECHO=${lt_ECHO-echo}
 if test "X$1" = X--no-reexec; then
   # Discard the --no-reexec flag, and continue.
   shift
 elif test "X$1" = X--fallback-echo; then
   # Avoid inline document here, it may be left over
   :
-elif test "X`($echo '\t') 2>/dev/null`" = 'X\t' ; then
-  # Yippee, $echo works!
+elif test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' ; then
+  # Yippee, $ECHO works!
   :
 else
   # Restart under the correct shell.
@@ -602,9 +556,9 @@
 if test "X$1" = X--fallback-echo; then
   # used as fallback echo
   shift
-  cat <<EOF
+  cat <<_LT_EOF
 $*
-EOF
+_LT_EOF
   exit 0
 fi
 
@@ -612,121 +566,116 @@
 # if CDPATH is set.
 (unset CDPATH) >/dev/null 2>&1 && unset CDPATH
 
-if test -z "$ECHO"; then
-if test "X${echo_test_string+set}" != Xset; then
-# find a string as large as possible, as long as the shell can cope with it
-  for cmd in 'sed 50q "$0"' 'sed 20q "$0"' 'sed 10q "$0"' 'sed 2q "$0"' 'echo test'; do
-    # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ...
-    if (echo_test_string=`eval $cmd`) 2>/dev/null &&
-       echo_test_string=`eval $cmd` &&
-       (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null
-    then
-      break
-    fi
-  done
-fi
+if test -z "$lt_ECHO"; then
+  if test "X${echo_test_string+set}" != Xset; then
+    # find a string as large as possible, as long as the shell can cope with it
+    for cmd in 'sed 50q "$0"' 'sed 20q "$0"' 'sed 10q "$0"' 'sed 2q "$0"' 'echo test'; do
+      # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ...
+      if { echo_test_string=`eval $cmd`; } 2>/dev/null &&
+	 { test "X$echo_test_string" = "X$echo_test_string"; } 2>/dev/null
+      then
+        break
+      fi
+    done
+  fi
 
-if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
-   echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
-   test "X$echo_testing_string" = "X$echo_test_string"; then
-  :
-else
-  # The Solaris, AIX, and Digital Unix default echo programs unquote
-  # backslashes.  This makes it impossible to quote backslashes using
-  #   echo "$something" | sed 's/\\/\\\\/g'
-  #
-  # So, first we look for a working echo in the user's PATH.
+  if test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' &&
+     echo_testing_string=`{ $ECHO "$echo_test_string"; } 2>/dev/null` &&
+     test "X$echo_testing_string" = "X$echo_test_string"; then
+    :
+  else
+    # The Solaris, AIX, and Digital Unix default echo programs unquote
+    # backslashes.  This makes it impossible to quote backslashes using
+    #   echo "$something" | sed 's/\\/\\\\/g'
+    #
+    # So, first we look for a working echo in the user's PATH.
 
-  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-  for dir in $PATH /usr/ucb; do
+    lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+    for dir in $PATH /usr/ucb; do
+      IFS="$lt_save_ifs"
+      if (test -f $dir/echo || test -f $dir/echo$ac_exeext) &&
+         test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' &&
+         echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` &&
+         test "X$echo_testing_string" = "X$echo_test_string"; then
+        ECHO="$dir/echo"
+        break
+      fi
+    done
     IFS="$lt_save_ifs"
-    if (test -f $dir/echo || test -f $dir/echo$ac_exeext) &&
-       test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' &&
-       echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` &&
-       test "X$echo_testing_string" = "X$echo_test_string"; then
-      echo="$dir/echo"
-      break
-    fi
-  done
-  IFS="$lt_save_ifs"
 
-  if test "X$echo" = Xecho; then
-    # We didn't find a better echo, so look for alternatives.
-    if test "X`(print -r '\t') 2>/dev/null`" = 'X\t' &&
-       echo_testing_string=`(print -r "$echo_test_string") 2>/dev/null` &&
-       test "X$echo_testing_string" = "X$echo_test_string"; then
-      # This shell has a builtin print -r that does the trick.
-      echo='print -r'
-    elif (test -f /bin/ksh || test -f /bin/ksh$ac_exeext) &&
-	 test "X$CONFIG_SHELL" != X/bin/ksh; then
-      # If we have ksh, try running configure again with it.
-      ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh}
-      export ORIGINAL_CONFIG_SHELL
-      CONFIG_SHELL=/bin/ksh
-      export CONFIG_SHELL
-      exec $CONFIG_SHELL "$0" --no-reexec ${1+"$@"}
-    else
-      # Try using printf.
-      echo='printf %s\n'
-      if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
-	 echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
-	 test "X$echo_testing_string" = "X$echo_test_string"; then
-	# Cool, printf works
-	:
-      elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` &&
-	   test "X$echo_testing_string" = 'X\t' &&
-	   echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
-	   test "X$echo_testing_string" = "X$echo_test_string"; then
-	CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL
-	export CONFIG_SHELL
-	SHELL="$CONFIG_SHELL"
-	export SHELL
-	echo="$CONFIG_SHELL $0 --fallback-echo"
-      elif echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` &&
-	   test "X$echo_testing_string" = 'X\t' &&
-	   echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
+    if test "X$ECHO" = Xecho; then
+      # We didn't find a better echo, so look for alternatives.
+      if test "X`{ print -r '\t'; } 2>/dev/null`" = 'X\t' &&
+         echo_testing_string=`{ print -r "$echo_test_string"; } 2>/dev/null` &&
+         test "X$echo_testing_string" = "X$echo_test_string"; then
+        # This shell has a builtin print -r that does the trick.
+        ECHO='print -r'
+      elif { test -f /bin/ksh || test -f /bin/ksh$ac_exeext; } &&
+	   test "X$CONFIG_SHELL" != X/bin/ksh; then
+        # If we have ksh, try running configure again with it.
+        ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh}
+        export ORIGINAL_CONFIG_SHELL
+        CONFIG_SHELL=/bin/ksh
+        export CONFIG_SHELL
+        exec $CONFIG_SHELL "$0" --no-reexec ${1+"$@"}
+      else
+        # Try using printf.
+        ECHO='printf %s\n'
+        if test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' &&
+	   echo_testing_string=`{ $ECHO "$echo_test_string"; } 2>/dev/null` &&
 	   test "X$echo_testing_string" = "X$echo_test_string"; then
-	echo="$CONFIG_SHELL $0 --fallback-echo"
-      else
-	# maybe with a smaller string...
-	prev=:
+	  # Cool, printf works
+	  :
+        elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` &&
+	     test "X$echo_testing_string" = 'X\t' &&
+	     echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
+	     test "X$echo_testing_string" = "X$echo_test_string"; then
+	  CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL
+	  export CONFIG_SHELL
+	  SHELL="$CONFIG_SHELL"
+	  export SHELL
+	  ECHO="$CONFIG_SHELL $0 --fallback-echo"
+        elif echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` &&
+	     test "X$echo_testing_string" = 'X\t' &&
+	     echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
+	     test "X$echo_testing_string" = "X$echo_test_string"; then
+	  ECHO="$CONFIG_SHELL $0 --fallback-echo"
+        else
+	  # maybe with a smaller string...
+	  prev=:
 
-	for cmd in 'echo test' 'sed 2q "$0"' 'sed 10q "$0"' 'sed 20q "$0"' 'sed 50q "$0"'; do
-	  if (test "X$echo_test_string" = "X`eval $cmd`") 2>/dev/null
-	  then
-	    break
-	  fi
-	  prev="$cmd"
-	done
+	  for cmd in 'echo test' 'sed 2q "$0"' 'sed 10q "$0"' 'sed 20q "$0"' 'sed 50q "$0"'; do
+	    if { test "X$echo_test_string" = "X`eval $cmd`"; } 2>/dev/null
+	    then
+	      break
+	    fi
+	    prev="$cmd"
+	  done
 
-	if test "$prev" != 'sed 50q "$0"'; then
-	  echo_test_string=`eval $prev`
-	  export echo_test_string
-	  exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "$0" ${1+"$@"}
-	else
-	  # Oops.  We lost completely, so just stick with echo.
-	  echo=echo
-	fi
+	  if test "$prev" != 'sed 50q "$0"'; then
+	    echo_test_string=`eval $prev`
+	    export echo_test_string
+	    exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "$0" ${1+"$@"}
+	  else
+	    # Oops.  We lost completely, so just stick with echo.
+	    ECHO=echo
+	  fi
+        fi
       fi
     fi
   fi
 fi
-fi
 
 # Copy echo and quote the copy suitably for passing to libtool from
 # the Makefile, instead of quoting the original, which is used later.
-ECHO=$echo
-if test "X$ECHO" = "X$CONFIG_SHELL $0 --fallback-echo"; then
-   ECHO="$CONFIG_SHELL \\\$\$0 --fallback-echo"
+lt_ECHO=$ECHO
+if test "X$lt_ECHO" = "X$CONFIG_SHELL $0 --fallback-echo"; then
+   lt_ECHO="$CONFIG_SHELL \\\$\$0 --fallback-echo"
 fi
 
 
 
 
-tagnames=${tagnames+${tagnames},}CXX
-
-tagnames=${tagnames+${tagnames},}F77
-
 exec 7<&0 </dev/null 6>&1
 
 # Name of the host.
@@ -745,7 +694,6 @@
 subdirs=
 MFLAGS=
 MAKEFLAGS=
-SHELL=${CONFIG_SHELL-/bin/sh}
 
 # Identity of this package.
 PACKAGE_NAME='ou'
@@ -753,6 +701,7 @@
 PACKAGE_VERSION='0'
 PACKAGE_STRING='ou 0'
 PACKAGE_BUGREPORT='oleh_derevenko@users.sourceforge.net'
+PACKAGE_URL=''
 
 ac_unique_file="src/ou/atomic.cpp"
 # Factoring default headers for most tests.
@@ -791,23 +740,30 @@
 # include <unistd.h>
 #endif"
 
-ac_subst_vars='LTLIBOBJS
+ac_subst_vars='am__EXEEXT_FALSE
+am__EXEEXT_TRUE
+LTLIBOBJS
 OU_NAMESPACE
 LIBOBJS
-LIBTOOL
-ac_ct_F77
-FFLAGS
-F77
 CXXCPP
-OBJDUMP
-AS
-DLLTOOL
+OTOOL64
+OTOOL
+LIPO
 NMEDIT
 DSYMUTIL
+lt_ECHO
 AR
-ECHO
 LN_S
+NM
+ac_ct_DUMPBIN
+DUMPBIN
+LD
+FGREP
 SED
+LIBTOOL
+OBJDUMP
+DLLTOOL
+AS
 RANLIB
 am__fastdepCXX_FALSE
 am__fastdepCXX_TRUE
@@ -895,6 +851,7 @@
 program_transform_name
 prefix
 exec_prefix
+PACKAGE_URL
 PACKAGE_BUGREPORT
 PACKAGE_STRING
 PACKAGE_VERSION
@@ -908,11 +865,10 @@
 enable_dependency_tracking
 enable_shared
 enable_static
+with_pic
 enable_fast_install
 with_gnu_ld
 enable_libtool_lock
-with_pic
-with_tags
 with_namespace
 enable_asserts
 '
@@ -929,8 +885,6 @@
 CXXFLAGS
 CCC
 CXXCPP
-F77
-FFLAGS
 OU_NAMESPACE'
 
 
@@ -1040,8 +994,7 @@
     ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
     # Reject names that are not valid shell variable names.
     expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
-      { $as_echo "$as_me: error: invalid feature name: $ac_useropt" >&2
-   { (exit 1); exit 1; }; }
+      as_fn_error "invalid feature name: $ac_useropt"
     ac_useropt_orig=$ac_useropt
     ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
     case $ac_user_opts in
@@ -1067,8 +1020,7 @@
     ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
     # Reject names that are not valid shell variable names.
     expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
-      { $as_echo "$as_me: error: invalid feature name: $ac_useropt" >&2
-   { (exit 1); exit 1; }; }
+      as_fn_error "invalid feature name: $ac_useropt"
     ac_useropt_orig=$ac_useropt
     ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
     case $ac_user_opts in
@@ -1272,8 +1224,7 @@
     ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
     # Reject names that are not valid shell variable names.
     expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
-      { $as_echo "$as_me: error: invalid package name: $ac_useropt" >&2
-   { (exit 1); exit 1; }; }
+      as_fn_error "invalid package name: $ac_useropt"
     ac_useropt_orig=$ac_useropt
     ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
     case $ac_user_opts in
@@ -1289,8 +1240,7 @@
     ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'`
     # Reject names that are not valid shell variable names.
     expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
-      { $as_echo "$as_me: error: invalid package name: $ac_useropt" >&2
-   { (exit 1); exit 1; }; }
+      as_fn_error "invalid package name: $ac_useropt"
     ac_useropt_orig=$ac_useropt
     ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
     case $ac_user_opts in
@@ -1320,17 +1270,17 @@
   | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
     x_libraries=$ac_optarg ;;
 
-  -*) { $as_echo "$as_me: error: unrecognized option: $ac_option
-Try \`$0 --help' for more information." >&2
-   { (exit 1); exit 1; }; }
+  -*) as_fn_error "unrecognized option: \`$ac_option'
+Try \`$0 --help' for more information."
     ;;
 
   *=*)
     ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='`
     # Reject names that are not valid shell variable names.
-    expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null &&
-      { $as_echo "$as_me: error: invalid variable name: $ac_envvar" >&2
-   { (exit 1); exit 1; }; }
+    case $ac_envvar in #(
+      '' | [0-9]* | *[!_$as_cr_alnum]* )
+      as_fn_error "invalid variable name: \`$ac_envvar'" ;;
+    esac
     eval $ac_envvar=\$ac_optarg
     export $ac_envvar ;;
 
@@ -1347,15 +1297,13 @@
 
 if test -n "$ac_prev"; then
   ac_option=--`echo $ac_prev | sed 's/_/-/g'`
-  { $as_echo "$as_me: error: missing argument to $ac_option" >&2
-   { (exit 1); exit 1; }; }
+  as_fn_error "missing argument to $ac_option"
 fi
 
 if test -n "$ac_unrecognized_opts"; then
   case $enable_option_checking in
     no) ;;
-    fatal) { $as_echo "$as_me: error: unrecognized options: $ac_unrecognized_opts" >&2
-   { (exit 1); exit 1; }; } ;;
+    fatal) as_fn_error "unrecognized options: $ac_unrecognized_opts" ;;
     *)     $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;;
   esac
 fi
@@ -1378,8 +1326,7 @@
     [\\/$]* | ?:[\\/]* )  continue;;
     NONE | '' ) case $ac_var in *prefix ) continue;; esac;;
   esac
-  { $as_echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2
-   { (exit 1); exit 1; }; }
+  as_fn_error "expected an absolute directory name for --$ac_var: $ac_val"
 done
 
 # There might be people who depend on the old broken behavior: `$host'
@@ -1409,11 +1356,9 @@
 ac_pwd=`pwd` && test -n "$ac_pwd" &&
 ac_ls_di=`ls -di .` &&
 ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` ||
-  { $as_echo "$as_me: error: working directory cannot be determined" >&2
-   { (exit 1); exit 1; }; }
+  as_fn_error "working directory cannot be determined"
 test "X$ac_ls_di" = "X$ac_pwd_ls_di" ||
-  { $as_echo "$as_me: error: pwd does not report name of working directory" >&2
-   { (exit 1); exit 1; }; }
+  as_fn_error "pwd does not report name of working directory"
 
 
 # Find the source files, if location was not specified.
@@ -1452,13 +1397,11 @@
 fi
 if test ! -r "$srcdir/$ac_unique_file"; then
   test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .."
-  { $as_echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2
-   { (exit 1); exit 1; }; }
+  as_fn_error "cannot find sources ($ac_unique_file) in $srcdir"
 fi
 ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work"
 ac_abs_confdir=`(
-	cd "$srcdir" && test -r "./$ac_unique_file" || { $as_echo "$as_me: error: $ac_msg" >&2
-   { (exit 1); exit 1; }; }
+	cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error "$ac_msg"
 	pwd)`
 # When building in place, set srcdir=.
 if test "$ac_abs_confdir" = "$ac_pwd"; then
@@ -1574,10 +1517,9 @@
 Optional Packages:
   --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
   --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
-  --with-gnu-ld           assume the C compiler uses GNU ld [default=no]
   --with-pic              try to use only PIC/non-PIC objects [default=use
                           both]
-  --with-tags[=TAGS]      include additional configurations [automatic]
+  --with-gnu-ld           assume the C compiler uses GNU ld [default=no]
   --with-namespace=name   sets the namespace for compiled code
 
 Some influential environment variables:
@@ -1592,8 +1534,6 @@
   CXX         C++ compiler command
   CXXFLAGS    C++ compiler flags
   CXXCPP      C++ preprocessor
-  F77         Fortran 77 compiler command
-  FFLAGS      Fortran 77 compiler flags
   OU_NAMESPACE
               which namespace OU will be compiled in
 
@@ -1664,451 +1604,1069 @@
 if $ac_init_version; then
   cat <<\_ACEOF
 ou configure 0
-generated by GNU Autoconf 2.63
+generated by GNU Autoconf 2.64
 
-Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
-2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
+Copyright (C) 2009 Free Software Foundation, Inc.
 This configure script is free software; the Free Software Foundation
 gives unlimited permission to copy, distribute and modify it.
 _ACEOF
   exit
 fi
-cat >config.log <<_ACEOF
-This file contains any messages produced by compilers while
-running configure, to aid debugging if configure makes a mistake.
 
-It was created by ou $as_me 0, which was
-generated by GNU Autoconf 2.63.  Invocation command line was
+## ------------------------ ##
+## Autoconf initialization. ##
+## ------------------------ ##
+
+# ac_fn_c_try_compile LINENO
+# --------------------------
+# Try to compile conftest.$ac_ext, and return whether this succeeded.
+ac_fn_c_try_compile ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  rm -f conftest.$ac_objext
+  if { { ac_try="$ac_compile"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_compile") 2>conftest.err
+  ac_status=$?
+  if test -s conftest.err; then
+    grep -v '^ *+' conftest.err >conftest.er1
+    cat conftest.er1 >&5
+    mv -f conftest.er1 conftest.err
+  fi
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest.$ac_objext; then :
+  ac_retval=0
+else
+  $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
 
-  $ $0 $@
+	ac_retval=1
+fi
+  eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
+  return $ac_retval
 
-_ACEOF
-exec 5>>config.log
+} # ac_fn_c_try_compile
+
+# ac_fn_c_try_cpp LINENO
+# ----------------------
+# Try to preprocess conftest.$ac_ext, and return whether this succeeded.
+ac_fn_c_try_cpp ()
 {
-cat <<_ASUNAME
-## --------- ##
-## Platform. ##
-## --------- ##
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  if { { ac_try="$ac_cpp conftest.$ac_ext"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_cpp conftest.$ac_ext") 2>conftest.err
+  ac_status=$?
+  if test -s conftest.err; then
+    grep -v '^ *+' conftest.err >conftest.er1
+    cat conftest.er1 >&5
+    mv -f conftest.er1 conftest.err
+  fi
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } >/dev/null && {
+	 test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       }; then :
+  ac_retval=0
+else
+  $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
 
-hostname = `(hostname || uname -n) 2>/dev/null | sed 1q`
-uname -m = `(uname -m) 2>/dev/null || echo unknown`
-uname -r = `(uname -r) 2>/dev/null || echo unknown`
-uname -s = `(uname -s) 2>/dev/null || echo unknown`
-uname -v = `(uname -v) 2>/dev/null || echo unknown`
+    ac_retval=1
+fi
+  eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
+  return $ac_retval
 
-/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown`
-/bin/uname -X     = `(/bin/uname -X) 2>/dev/null     || echo unknown`
+} # ac_fn_c_try_cpp
 
-/bin/arch              = `(/bin/arch) 2>/dev/null              || echo unknown`
-/usr/bin/arch -k       = `(/usr/bin/arch -k) 2>/dev/null       || echo unknown`
-/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown`
-/usr/bin/hostinfo      = `(/usr/bin/hostinfo) 2>/dev/null      || echo unknown`
-/bin/machine           = `(/bin/machine) 2>/dev/null           || echo unknown`
-/usr/bin/oslevel       = `(/usr/bin/oslevel) 2>/dev/null       || echo unknown`
-/bin/universe          = `(/bin/universe) 2>/dev/null          || echo unknown`
+# ac_fn_c_check_header_mongrel LINENO HEADER VAR INCLUDES
+# -------------------------------------------------------
+# Tests whether HEADER exists, giving a warning if it cannot be compiled using
+# the include files in INCLUDES and setting the cache variable VAR
+# accordingly.
+ac_fn_c_check_header_mongrel ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  if { as_var=$3; eval "test \"\${$as_var+set}\" = set"; }; then :
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
+$as_echo_n "checking for $2... " >&6; }
+if { as_var=$3; eval "test \"\${$as_var+set}\" = set"; }; then :
+  $as_echo_n "(cached) " >&6
+fi
+eval ac_res=\$$3
+	       { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+else
+  # Is the header compilable?
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 usability" >&5
+$as_echo_n "checking $2 usability... " >&6; }
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+$4
+#include <$2>
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_header_compiler=yes
+else
+  ac_header_compiler=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_compiler" >&5
+$as_echo "$ac_header_compiler" >&6; }
 
-_ASUNAME
+# Is the header present?
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 presence" >&5
+$as_echo_n "checking $2 presence... " >&6; }
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <$2>
+_ACEOF
+if ac_fn_c_try_cpp "$LINENO"; then :
+  ac_header_preproc=yes
+else
+  ac_header_preproc=no
+fi
+rm -f conftest.err conftest.$ac_ext
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_preproc" >&5
+$as_echo "$ac_header_preproc" >&6; }
 
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  $as_echo "PATH: $as_dir"
-done
-IFS=$as_save_IFS
+# So?  What about this header?
+case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in #((
+  yes:no: )
+    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&5
+$as_echo "$as_me: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&2;}
+    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5
+$as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;}
+    ;;
+  no:yes:* )
+    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: present but cannot be compiled" >&5
+$as_echo "$as_me: WARNING: $2: present but cannot be compiled" >&2;}
+    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2:     check for missing prerequisite headers?" >&5
+$as_echo "$as_me: WARNING: $2:     check for missing prerequisite headers?" >&2;}
+    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: see the Autoconf documentation" >&5
+$as_echo "$as_me: WARNING: $2: see the Autoconf documentation" >&2;}
+    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2:     section \"Present But Cannot Be Compiled\"" >&5
+$as_echo "$as_me: WARNING: $2:     section \"Present But Cannot Be Compiled\"" >&2;}
+    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5
+$as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;}
+( cat <<\_ASBOX
+## --------------------------------------------------- ##
+## Report this to oleh_derevenko@users.sourceforge.net ##
+## --------------------------------------------------- ##
+_ASBOX
+     ) | sed "s/^/$as_me: WARNING:     /" >&2
+    ;;
+esac
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
+$as_echo_n "checking for $2... " >&6; }
+if { as_var=$3; eval "test \"\${$as_var+set}\" = set"; }; then :
+  $as_echo_n "(cached) " >&6
+else
+  eval "$3=\$ac_header_compiler"
+fi
+eval ac_res=\$$3
+	       { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+fi
+  eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
 
-} >&5
+} # ac_fn_c_check_header_mongrel
 
-cat >&5 <<_ACEOF
+# ac_fn_c_try_run LINENO
+# ----------------------
+# Try to link conftest.$ac_ext, and return whether this succeeded. Assumes
+# that executables *can* be run.
+ac_fn_c_try_run ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  if { { ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_link") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } && { ac_try='./conftest$ac_exeext'
+  { { case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_try") 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; }; then :
+  ac_retval=0
+else
+  $as_echo "$as_me: program exited with status $ac_status" >&5
+       $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
 
+       ac_retval=$ac_status
+fi
+  rm -rf conftest.dSYM conftest_ipa8_conftest.oo
+  eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
+  return $ac_retval
 
-## ----------- ##
-## Core tests. ##
-## ----------- ##
+} # ac_fn_c_try_run
 
+# ac_fn_c_check_header_compile LINENO HEADER VAR INCLUDES
+# -------------------------------------------------------
+# Tests whether HEADER exists and can be compiled using the include files in
+# INCLUDES, setting the cache variable VAR accordingly.
+ac_fn_c_check_header_compile ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
+$as_echo_n "checking for $2... " >&6; }
+if { as_var=$3; eval "test \"\${$as_var+set}\" = set"; }; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+$4
+#include <$2>
 _ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  eval "$3=yes"
+else
+  eval "$3=no"
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+eval ac_res=\$$3
+	       { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+  eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
 
+} # ac_fn_c_check_header_compile
 
-# Keep a trace of the command line.
-# Strip out --no-create and --no-recursion so they do not pile up.
-# Strip out --silent because we don't want to record it for future runs.
-# Also quote any args containing shell meta-characters.
-# Make two passes to allow for proper duplicate-argument suppression.
-ac_configure_args=
-ac_configure_args0=
-ac_configure_args1=
-ac_must_keep_next=false
-for ac_pass in 1 2
-do
-  for ac_arg
-  do
-    case $ac_arg in
-    -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;;
-    -q | -quiet | --quiet | --quie | --qui | --qu | --q \
-    | -silent | --silent | --silen | --sile | --sil)
-      continue ;;
-    *\'*)
-      ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
-    esac
-    case $ac_pass in
-    1) ac_configure_args0="$ac_configure_args0 '$ac_arg'" ;;
-    2)
-      ac_configure_args1="$ac_configure_args1 '$ac_arg'"
-      if test $ac_must_keep_next = true; then
-	ac_must_keep_next=false # Got value, back to normal.
-      else
-	case $ac_arg in
-	  *=* | --config-cache | -C | -disable-* | --disable-* \
-	  | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \
-	  | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \
-	  | -with-* | --with-* | -without-* | --without-* | --x)
-	    case "$ac_configure_args0 " in
-	      "$ac_configure_args1"*" '$ac_arg' "* ) continue ;;
-	    esac
-	    ;;
-	  -* ) ac_must_keep_next=true ;;
-	esac
-      fi
-      ac_configure_args="$ac_configure_args '$ac_arg'"
-      ;;
-    esac
-  done
-done
-$as_unset ac_configure_args0 || test "${ac_configure_args0+set}" != set || { ac_configure_args0=; export ac_configure_args0; }
-$as_unset ac_configure_args1 || test "${ac_configure_args1+set}" != set || { ac_configure_args1=; export ac_configure_args1; }
+# ac_fn_cxx_try_compile LINENO
+# ----------------------------
+# Try to compile conftest.$ac_ext, and return whether this succeeded.
+ac_fn_cxx_try_compile ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  rm -f conftest.$ac_objext
+  if { { ac_try="$ac_compile"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_compile") 2>conftest.err
+  ac_status=$?
+  if test -s conftest.err; then
+    grep -v '^ *+' conftest.err >conftest.er1
+    cat conftest.er1 >&5
+    mv -f conftest.er1 conftest.err
+  fi
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } && {
+	 test -z "$ac_cxx_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest.$ac_objext; then :
+  ac_retval=0
+else
+  $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
 
-# When interrupted or exit'd, cleanup temporary files, and complete
-# config.log.  We remove comments because anyway the quotes in there
-# would cause problems or look ugly.
-# WARNING: Use '\'' to represent an apostrophe within the trap.
-# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug.
-trap 'exit_status=$?
-  # Save into config.log some information that might help in debugging.
-  {
-    echo
+	ac_retval=1
+fi
+  eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
+  return $ac_retval
 
-    cat <<\_ASBOX
-## ---------------- ##
-## Cache variables. ##
-## ---------------- ##
-_ASBOX
-    echo
-    # The following way of writing the cache mishandles newlines in values,
-(
-  for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do
-    eval ac_val=\$$ac_var
-    case $ac_val in #(
-    *${as_nl}*)
-      case $ac_var in #(
-      *_cv_*) { $as_echo "$as_me:$LINENO: WARNING: cache variable $ac_var contains a newline" >&5
-$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
-      esac
-      case $ac_var in #(
-      _ | IFS | as_nl) ;; #(
-      BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(
-      *) $as_unset $ac_var ;;
-      esac ;;
-    esac
-  done
-  (set) 2>&1 |
-    case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #(
-    *${as_nl}ac_space=\ *)
-      sed -n \
-	"s/'\''/'\''\\\\'\'''\''/g;
-	  s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p"
-      ;; #(
-    *)
-      sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
-      ;;
-    esac |
-    sort
-)
-    echo
+} # ac_fn_cxx_try_compile
 
-    cat <<\_ASBOX
-## ----------------- ##
-## Output variables. ##
-## ----------------- ##
-_ASBOX
-    echo
-    for ac_var in $ac_subst_vars
-    do
-      eval ac_val=\$$ac_var
-      case $ac_val in
-      *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
-      esac
-      $as_echo "$ac_var='\''$ac_val'\''"
-    done | sort
-    echo
+# ac_fn_c_try_link LINENO
+# -----------------------
+# Try to link conftest.$ac_ext, and return whether this succeeded.
+ac_fn_c_try_link ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  rm -f conftest.$ac_objext conftest$ac_exeext
+  if { { ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_link") 2>conftest.err
+  ac_status=$?
+  if test -s conftest.err; then
+    grep -v '^ *+' conftest.err >conftest.er1
+    cat conftest.er1 >&5
+    mv -f conftest.er1 conftest.err
+  fi
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest$ac_exeext && {
+	 test "$cross_compiling" = yes ||
+	 $as_test_x conftest$ac_exeext
+       }; then :
+  ac_retval=0
+else
+  $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
 
-    if test -n "$ac_subst_files"; then
-      cat <<\_ASBOX
-## ------------------- ##
-## File substitutions. ##
-## ------------------- ##
-_ASBOX
-      echo
-      for ac_var in $ac_subst_files
-      do
-	eval ac_val=\$$ac_var
-	case $ac_val in
-	*\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
-	esac
-	$as_echo "$ac_var='\''$ac_val'\''"
-      done | sort
-      echo
-    fi
+	ac_retval=1
+fi
+  # Delete the IPA/IPO (Inter Procedural Analysis/Optimization) information
+  # created by the PGI compiler (conftest_ipa8_conftest.oo), as it would
+  # interfere with the next link command; also delete a directory that is
+  # left behind by Apple's compiler.  We do this before executing the actions.
+  rm -rf conftest.dSYM conftest_ipa8_conftest.oo
+  eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
+  return $ac_retval
 
-    if test -s confdefs.h; then
-      cat <<\_ASBOX
-## ----------- ##
-## confdefs.h. ##
-## ----------- ##
-_ASBOX
-      echo
-      cat confdefs.h
-      echo
-    fi
-    test "$ac_signal" != 0 &&
-      $as_echo "$as_me: caught signal $ac_signal"
-    $as_echo "$as_me: exit $exit_status"
-  } >&5
-  rm -f core *.core core.conftest.* &&
-    rm -f -r conftest* confdefs* conf$$* $ac_clean_files &&
-    exit $exit_status
-' 0
-for ac_signal in 1 2 13 15; do
-  trap 'ac_signal='$ac_signal'; { (exit 1); exit 1; }' $ac_signal
-done
-ac_signal=0
+} # ac_fn_c_try_link
 
-# confdefs.h avoids OS command line length limits that DEFS can exceed.
-rm -f -r conftest* confdefs.h
+# ac_fn_c_check_func LINENO FUNC VAR
+# ----------------------------------
+# Tests whether FUNC exists, setting the cache variable VAR accordingly
+ac_fn_c_check_func ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
+$as_echo_n "checking for $2... " >&6; }
+if { as_var=$3; eval "test \"\${$as_var+set}\" = set"; }; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+/* Define $2 to an innocuous variant, in case <limits.h> declares $2.
+   For example, HP-UX 11i <limits.h> declares gettimeofday.  */
+#define $2 innocuous_$2
 
-# Predefined preprocessor variables.
+/* System header to define __stub macros and hopefully few prototypes,
+    which can conflict with char $2 (); below.
+    Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+    <limits.h> exists even on freestanding compilers.  */
 
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE_NAME "$PACKAGE_NAME"
-_ACEOF
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
 
+#undef $2
 
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE_TARNAME "$PACKAGE_TARNAME"
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char $2 ();
+/* The GNU C library defines this for functions which it implements
+    to always fail with ENOSYS.  Some functions are actually named
+    something starting with __ and the normal name is an alias.  */
+#if defined __stub_$2 || defined __stub___$2
+choke me
+#endif
+
+int
+main ()
+{
+return $2 ();
+  ;
+  return 0;
+}
 _ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  eval "$3=yes"
+else
+  eval "$3=no"
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+fi
+eval ac_res=\$$3
+	       { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+  eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
 
+} # ac_fn_c_check_func
 
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE_VERSION "$PACKAGE_VERSION"
-_ACEOF
+# ac_fn_cxx_try_cpp LINENO
+# ------------------------
+# Try to preprocess conftest.$ac_ext, and return whether this succeeded.
+ac_fn_cxx_try_cpp ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  if { { ac_try="$ac_cpp conftest.$ac_ext"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_cpp conftest.$ac_ext") 2>conftest.err
+  ac_status=$?
+  if test -s conftest.err; then
+    grep -v '^ *+' conftest.err >conftest.er1
+    cat conftest.er1 >&5
+    mv -f conftest.er1 conftest.err
+  fi
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } >/dev/null && {
+	 test -z "$ac_cxx_preproc_warn_flag$ac_cxx_werror_flag" ||
+	 test ! -s conftest.err
+       }; then :
+  ac_retval=0
+else
+  $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
 
+    ac_retval=1
+fi
+  eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
+  return $ac_retval
 
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE_STRING "$PACKAGE_STRING"
-_ACEOF
+} # ac_fn_cxx_try_cpp
 
+# ac_fn_cxx_try_link LINENO
+# -------------------------
+# Try to link conftest.$ac_ext, and return whether this succeeded.
+ac_fn_cxx_try_link ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  rm -f conftest.$ac_objext conftest$ac_exeext
+  if { { ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_link") 2>conftest.err
+  ac_status=$?
+  if test -s conftest.err; then
+    grep -v '^ *+' conftest.err >conftest.er1
+    cat conftest.er1 >&5
+    mv -f conftest.er1 conftest.err
+  fi
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } && {
+	 test -z "$ac_cxx_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest$ac_exeext && {
+	 test "$cross_compiling" = yes ||
+	 $as_test_x conftest$ac_exeext
+       }; then :
+  ac_retval=0
+else
+  $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
 
-cat >>confdefs.h <<_ACEOF
-#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT"
-_ACEOF
+	ac_retval=1
+fi
+  # Delete the IPA/IPO (Inter Procedural Analysis/Optimization) information
+  # created by the PGI compiler (conftest_ipa8_conftest.oo), as it would
+  # interfere with the next link command; also delete a directory that is
+  # left behind by Apple's compiler.  We do this before executing the actions.
+  rm -rf conftest.dSYM conftest_ipa8_conftest.oo
+  eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
+  return $ac_retval
 
+} # ac_fn_cxx_try_link
 
-# Let the site file select an alternate cache file if it wants to.
-# Prefer an explicitly selected file to automatically selected ones.
-ac_site_file1=NONE
-ac_site_file2=NONE
-if test -n "$CONFIG_SITE"; then
-  ac_site_file1=$CONFIG_SITE
-elif test "x$prefix" != xNONE; then
-  ac_site_file1=$prefix/share/config.site
-  ac_site_file2=$prefix/etc/config.site
+# ac_fn_c_check_type LINENO TYPE VAR INCLUDES
+# -------------------------------------------
+# Tests whether TYPE exists after having included INCLUDES, setting cache
+# variable VAR accordingly.
+ac_fn_c_check_type ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
+$as_echo_n "checking for $2... " >&6; }
+if { as_var=$3; eval "test \"\${$as_var+set}\" = set"; }; then :
+  $as_echo_n "(cached) " >&6
 else
-  ac_site_file1=$ac_default_prefix/share/config.site
-  ac_site_file2=$ac_default_prefix/etc/config.site
-fi
-for ac_site_file in "$ac_site_file1" "$ac_site_file2"
-do
-  test "x$ac_site_file" = xNONE && continue
-  if test -r "$ac_site_file"; then
-    { $as_echo "$as_me:$LINENO: loading site script $ac_site_file" >&5
-$as_echo "$as_me: loading site script $ac_site_file" >&6;}
-    sed 's/^/| /' "$ac_site_file" >&5
-    . "$ac_site_file"
-  fi
-done
+  eval "$3=no"
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+$4
+int
+main ()
+{
+if (sizeof ($2))
+	 return 0;
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+$4
+int
+main ()
+{
+if (sizeof (($2)))
+	    return 0;
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
 
-if test -r "$cache_file"; then
-  # Some versions of bash will fail to source /dev/null (special
-  # files actually), so we avoid doing that.
-  if test -f "$cache_file"; then
-    { $as_echo "$as_me:$LINENO: loading cache $cache_file" >&5
-$as_echo "$as_me: loading cache $cache_file" >&6;}
-    case $cache_file in
-      [\\/]* | ?:[\\/]* ) . "$cache_file";;
-      *)                      . "./$cache_file";;
-    esac
-  fi
 else
-  { $as_echo "$as_me:$LINENO: creating cache $cache_file" >&5
-$as_echo "$as_me: creating cache $cache_file" >&6;}
-  >$cache_file
-fi
-
-# Check that the precious variables saved in the cache have kept the same
-# value.
-ac_cache_corrupted=false
-for ac_var in $ac_precious_vars; do
-  eval ac_old_set=\$ac_cv_env_${ac_var}_set
-  eval ac_new_set=\$ac_env_${ac_var}_set
-  eval ac_old_val=\$ac_cv_env_${ac_var}_value
-  eval ac_new_val=\$ac_env_${ac_var}_value
-  case $ac_old_set,$ac_new_set in
-    set,)
-      { $as_echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
-$as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;}
-      ac_cache_corrupted=: ;;
-    ,set)
-      { $as_echo "$as_me:$LINENO: error: \`$ac_var' was not set in the previous run" >&5
-$as_echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;}
-      ac_cache_corrupted=: ;;
-    ,);;
-    *)
-      if test "x$ac_old_val" != "x$ac_new_val"; then
-	# differences in whitespace do not lead to failure.
-	ac_old_val_w=`echo x $ac_old_val`
-	ac_new_val_w=`echo x $ac_new_val`
-	if test "$ac_old_val_w" != "$ac_new_val_w"; then
-	  { $as_echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5
-$as_echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;}
-	  ac_cache_corrupted=:
-	else
-	  { $as_echo "$as_me:$LINENO: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5
-$as_echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;}
-	  eval $ac_var=\$ac_old_val
-	fi
-	{ $as_echo "$as_me:$LINENO:   former value:  \`$ac_old_val'" >&5
-$as_echo "$as_me:   former value:  \`$ac_old_val'" >&2;}
-	{ $as_echo "$as_me:$LINENO:   current value: \`$ac_new_val'" >&5
-$as_echo "$as_me:   current value: \`$ac_new_val'" >&2;}
-      fi;;
-  esac
-  # Pass precious variables to config.status.
-  if test "$ac_new_set" = set; then
-    case $ac_new_val in
-    *\'*) ac_arg=$ac_var=`$as_echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
-    *) ac_arg=$ac_var=$ac_new_val ;;
-    esac
-    case " $ac_configure_args " in
-      *" '$ac_arg' "*) ;; # Avoid dups.  Use of quotes ensures accuracy.
-      *) ac_configure_args="$ac_configure_args '$ac_arg'" ;;
-    esac
-  fi
-done
-if $ac_cache_corrupted; then
-  { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5
-$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-  { $as_echo "$as_me:$LINENO: error: changes in the environment can compromise the build" >&5
-$as_echo "$as_me: error: changes in the environment can compromise the build" >&2;}
-  { { $as_echo "$as_me:$LINENO: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5
-$as_echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&2;}
-   { (exit 1); exit 1; }; }
+  eval "$3=yes"
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
 fi
+eval ac_res=\$$3
+	       { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+  eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
 
+} # ac_fn_c_check_type
 
+# ac_fn_c_find_intX_t LINENO BITS VAR
+# -----------------------------------
+# Finds a signed integer type with width BITS, setting cache variable VAR
+# accordingly.
+ac_fn_c_find_intX_t ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for int$2_t" >&5
+$as_echo_n "checking for int$2_t... " >&6; }
+if { as_var=$3; eval "test \"\${$as_var+set}\" = set"; }; then :
+  $as_echo_n "(cached) " >&6
+else
+  eval "$3=no"
+     for ac_type in int$2_t 'int' 'long int' \
+	 'long long int' 'short int' 'signed char'; do
+       cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+$ac_includes_default
+int
+main ()
+{
+static int test_array [1 - 2 * !(0 < ($ac_type) (((($ac_type) 1 << ($2 - 2)) - 1) * 2 + 1))];
+test_array [0] = 0
 
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+$ac_includes_default
+int
+main ()
+{
+static int test_array [1 - 2 * !(($ac_type) (((($ac_type) 1 << ($2 - 2)) - 1) * 2 + 1)
+		 < ($ac_type) (((($ac_type) 1 << ($2 - 2)) - 1) * 2 + 2))];
+test_array [0] = 0
 
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
 
+else
+  case $ac_type in #(
+  int$2_t) :
+    eval "$3=yes" ;; #(
+  *) :
+    eval "$3=\$ac_type" ;;
+esac
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+       eval as_val=\$$3
+   if test "x$as_val" = x""no; then :
 
+else
+  break
+fi
+     done
+fi
+eval ac_res=\$$3
+	       { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+  eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
 
+} # ac_fn_c_find_intX_t
 
+# ac_fn_c_find_uintX_t LINENO BITS VAR
+# ------------------------------------
+# Finds an unsigned integer type with width BITS, setting cache variable VAR
+# accordingly.
+ac_fn_c_find_uintX_t ()
+{
+  as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for uint$2_t" >&5
+$as_echo_n "checking for uint$2_t... " >&6; }
+if { as_var=$3; eval "test \"\${$as_var+set}\" = set"; }; then :
+  $as_echo_n "(cached) " >&6
+else
+  eval "$3=no"
+     for ac_type in uint$2_t 'unsigned int' 'unsigned long int' \
+	 'unsigned long long int' 'unsigned short int' 'unsigned char'; do
+       cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+$ac_includes_default
+int
+main ()
+{
+static int test_array [1 - 2 * !(($ac_type) -1 >> ($2 - 1) == 1)];
+test_array [0] = 0
 
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  case $ac_type in #(
+  uint$2_t) :
+    eval "$3=yes" ;; #(
+  *) :
+    eval "$3=\$ac_type" ;;
+esac
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+       eval as_val=\$$3
+   if test "x$as_val" = x""no; then :
 
+else
+  break
+fi
+     done
+fi
+eval ac_res=\$$3
+	       { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+  eval $as_lineno_stack; test "x$as_lineno_stack" = x && { as_lineno=; unset as_lineno;}
 
+} # ac_fn_c_find_uintX_t
+cat >config.log <<_ACEOF
+This file contains any messages produced by compilers while
+running configure, to aid debugging if configure makes a mistake.
 
+It was created by ou $as_me 0, which was
+generated by GNU Autoconf 2.64.  Invocation command line was
 
+  $ $0 $@
 
+_ACEOF
+exec 5>>config.log
+{
+cat <<_ASUNAME
+## --------- ##
+## Platform. ##
+## --------- ##
 
+hostname = `(hostname || uname -n) 2>/dev/null | sed 1q`
+uname -m = `(uname -m) 2>/dev/null || echo unknown`
+uname -r = `(uname -r) 2>/dev/null || echo unknown`
+uname -s = `(uname -s) 2>/dev/null || echo unknown`
+uname -v = `(uname -v) 2>/dev/null || echo unknown`
 
+/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown`
+/bin/uname -X     = `(/bin/uname -X) 2>/dev/null     || echo unknown`
 
+/bin/arch              = `(/bin/arch) 2>/dev/null              || echo unknown`
+/usr/bin/arch -k       = `(/usr/bin/arch -k) 2>/dev/null       || echo unknown`
+/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown`
+/usr/bin/hostinfo      = `(/usr/bin/hostinfo) 2>/dev/null      || echo unknown`
+/bin/machine           = `(/bin/machine) 2>/dev/null           || echo unknown`
+/usr/bin/oslevel       = `(/usr/bin/oslevel) 2>/dev/null       || echo unknown`
+/bin/universe          = `(/bin/universe) 2>/dev/null          || echo unknown`
 
+_ASUNAME
 
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    $as_echo "PATH: $as_dir"
+  done
+IFS=$as_save_IFS
 
+} >&5
 
+cat >&5 <<_ACEOF
 
 
+## ----------- ##
+## Core tests. ##
+## ----------- ##
 
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
+_ACEOF
 
 
-# AC_CONFIG_HEADER([config.h])
-ac_aux_dir=
-for ac_dir in "$srcdir" "$srcdir/.." "$srcdir/../.."; do
-  if test -f "$ac_dir/install-sh"; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/install-sh -c"
-    break
-  elif test -f "$ac_dir/install.sh"; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/install.sh -c"
-    break
-  elif test -f "$ac_dir/shtool"; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/shtool install -c"
-    break
-  fi
+# Keep a trace of the command line.
+# Strip out --no-create and --no-recursion so they do not pile up.
+# Strip out --silent because we don't want to record it for future runs.
+# Also quote any args containing shell meta-characters.
+# Make two passes to allow for proper duplicate-argument suppression.
+ac_configure_args=
+ac_configure_args0=
+ac_configure_args1=
+ac_must_keep_next=false
+for ac_pass in 1 2
+do
+  for ac_arg
+  do
+    case $ac_arg in
+    -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;;
+    -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+    | -silent | --silent | --silen | --sile | --sil)
+      continue ;;
+    *\'*)
+      ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
+    esac
+    case $ac_pass in
+    1) as_fn_append ac_configure_args0 " '$ac_arg'" ;;
+    2)
+      as_fn_append ac_configure_args1 " '$ac_arg'"
+      if test $ac_must_keep_next = true; then
+	ac_must_keep_next=false # Got value, back to normal.
+      else
+	case $ac_arg in
+	  *=* | --config-cache | -C | -disable-* | --disable-* \
+	  | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \
+	  | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \
+	  | -with-* | --with-* | -without-* | --without-* | --x)
+	    case "$ac_configure_args0 " in
+	      "$ac_configure_args1"*" '$ac_arg' "* ) continue ;;
+	    esac
+	    ;;
+	  -* ) ac_must_keep_next=true ;;
+	esac
+      fi
+      as_fn_append ac_configure_args " '$ac_arg'"
+      ;;
+    esac
+  done
 done
-if test -z "$ac_aux_dir"; then
-  { { $as_echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" >&5
-$as_echo "$as_me: error: cannot find install-sh or install.sh in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" >&2;}
-   { (exit 1); exit 1; }; }
-fi
-
-# These three variables are undocumented and unsupported,
-# and are intended to be withdrawn in a future Autoconf release.
-# They can cause serious problems if a builder's source tree is in a directory
-# whose full name contains unusual characters.
-ac_config_guess="$SHELL $ac_aux_dir/config.guess"  # Please don't use this var.
-ac_config_sub="$SHELL $ac_aux_dir/config.sub"  # Please don't use this var.
-ac_configure="$SHELL $ac_aux_dir/configure"  # Please don't use this var.
+{ ac_configure_args0=; unset ac_configure_args0;}
+{ ac_configure_args1=; unset ac_configure_args1;}
 
+# When interrupted or exit'd, cleanup temporary files, and complete
+# config.log.  We remove comments because anyway the quotes in there
+# would cause problems or look ugly.
+# WARNING: Use '\'' to represent an apostrophe within the trap.
+# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug.
+trap 'exit_status=$?
+  # Save into config.log some information that might help in debugging.
+  {
+    echo
 
-# Make sure we can run config.sub.
-$SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 ||
-  { { $as_echo "$as_me:$LINENO: error: cannot run $SHELL $ac_aux_dir/config.sub" >&5
-$as_echo "$as_me: error: cannot run $SHELL $ac_aux_dir/config.sub" >&2;}
-   { (exit 1); exit 1; }; }
+    cat <<\_ASBOX
+## ---------------- ##
+## Cache variables. ##
+## ---------------- ##
+_ASBOX
+    echo
+    # The following way of writing the cache mishandles newlines in values,
+(
+  for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do
+    eval ac_val=\$$ac_var
+    case $ac_val in #(
+    *${as_nl}*)
+      case $ac_var in #(
+      *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5
+$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
+      esac
+      case $ac_var in #(
+      _ | IFS | as_nl) ;; #(
+      BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(
+      *) { eval $ac_var=; unset $ac_var;} ;;
+      esac ;;
+    esac
+  done
+  (set) 2>&1 |
+    case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #(
+    *${as_nl}ac_space=\ *)
+      sed -n \
+	"s/'\''/'\''\\\\'\'''\''/g;
+	  s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p"
+      ;; #(
+    *)
+      sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
+      ;;
+    esac |
+    sort
+)
+    echo
 
-{ $as_echo "$as_me:$LINENO: checking build system type" >&5
-$as_echo_n "checking build system type... " >&6; }
-if test "${ac_cv_build+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
-  ac_build_alias=$build_alias
-test "x$ac_build_alias" = x &&
-  ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"`
+    cat <<\_ASBOX
+## ----------------- ##
+## Output variables. ##
+## ----------------- ##
+_ASBOX
+    echo
+    for ac_var in $ac_subst_vars
+    do
+      eval ac_val=\$$ac_var
+      case $ac_val in
+      *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
+      esac
+      $as_echo "$ac_var='\''$ac_val'\''"
+    done | sort
+    echo
+
+    if test -n "$ac_subst_files"; then
+      cat <<\_ASBOX
+## ------------------- ##
+## File substitutions. ##
+## ------------------- ##
+_ASBOX
+      echo
+      for ac_var in $ac_subst_files
+      do
+	eval ac_val=\$$ac_var
+	case $ac_val in
+	*\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
+	esac
+	$as_echo "$ac_var='\''$ac_val'\''"
+      done | sort
+      echo
+    fi
+
+    if test -s confdefs.h; then
+      cat <<\_ASBOX
+## ----------- ##
+## confdefs.h. ##
+## ----------- ##
+_ASBOX
+      echo
+      cat confdefs.h
+      echo
+    fi
+    test "$ac_signal" != 0 &&
+      $as_echo "$as_me: caught signal $ac_signal"
+    $as_echo "$as_me: exit $exit_status"
+  } >&5
+  rm -f core *.core core.conftest.* &&
+    rm -f -r conftest* confdefs* conf$$* $ac_clean_files &&
+    exit $exit_status
+' 0
+for ac_signal in 1 2 13 15; do
+  trap 'ac_signal='$ac_signal'; as_fn_exit 1' $ac_signal
+done
+ac_signal=0
+
+# confdefs.h avoids OS command line length limits that DEFS can exceed.
+rm -f -r conftest* confdefs.h
+
+$as_echo "/* confdefs.h */" > confdefs.h
+
+# Predefined preprocessor variables.
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_NAME "$PACKAGE_NAME"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_TARNAME "$PACKAGE_TARNAME"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_VERSION "$PACKAGE_VERSION"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_STRING "$PACKAGE_STRING"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_URL "$PACKAGE_URL"
+_ACEOF
+
+
+# Let the site file select an alternate cache file if it wants to.
+# Prefer an explicitly selected file to automatically selected ones.
+ac_site_file1=NONE
+ac_site_file2=NONE
+if test -n "$CONFIG_SITE"; then
+  ac_site_file1=$CONFIG_SITE
+elif test "x$prefix" != xNONE; then
+  ac_site_file1=$prefix/share/config.site
+  ac_site_file2=$prefix/etc/config.site
+else
+  ac_site_file1=$ac_default_prefix/share/config.site
+  ac_site_file2=$ac_default_prefix/etc/config.site
+fi
+for ac_site_file in "$ac_site_file1" "$ac_site_file2"
+do
+  test "x$ac_site_file" = xNONE && continue
+  if test -r "$ac_site_file"; then
+    { $as_echo "$as_me:${as_lineno-$LINENO}: loading site script $ac_site_file" >&5
+$as_echo "$as_me: loading site script $ac_site_file" >&6;}
+    sed 's/^/| /' "$ac_site_file" >&5
+    . "$ac_site_file"
+  fi
+done
+
+if test -r "$cache_file"; then
+  # Some versions of bash will fail to source /dev/null (special
+  # files actually), so we avoid doing that.
+  if test -f "$cache_file"; then
+    { $as_echo "$as_me:${as_lineno-$LINENO}: loading cache $cache_file" >&5
+$as_echo "$as_me: loading cache $cache_file" >&6;}
+    case $cache_file in
+      [\\/]* | ?:[\\/]* ) . "$cache_file";;
+      *)                      . "./$cache_file";;
+    esac
+  fi
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: creating cache $cache_file" >&5
+$as_echo "$as_me: creating cache $cache_file" >&6;}
+  >$cache_file
+fi
+
+# Check that the precious variables saved in the cache have kept the same
+# value.
+ac_cache_corrupted=false
+for ac_var in $ac_precious_vars; do
+  eval ac_old_set=\$ac_cv_env_${ac_var}_set
+  eval ac_new_set=\$ac_env_${ac_var}_set
+  eval ac_old_val=\$ac_cv_env_${ac_var}_value
+  eval ac_new_val=\$ac_env_${ac_var}_value
+  case $ac_old_set,$ac_new_set in
+    set,)
+      { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
+$as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;}
+      ac_cache_corrupted=: ;;
+    ,set)
+      { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was not set in the previous run" >&5
+$as_echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;}
+      ac_cache_corrupted=: ;;
+    ,);;
+    *)
+      if test "x$ac_old_val" != "x$ac_new_val"; then
+	# differences in whitespace do not lead to failure.
+	ac_old_val_w=`echo x $ac_old_val`
+	ac_new_val_w=`echo x $ac_new_val`
+	if test "$ac_old_val_w" != "$ac_new_val_w"; then
+	  { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' has changed since the previous run:" >&5
+$as_echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;}
+	  ac_cache_corrupted=:
+	else
+	  { $as_echo "$as_me:${as_lineno-$LINENO}: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5
+$as_echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;}
+	  eval $ac_var=\$ac_old_val
+	fi
+	{ $as_echo "$as_me:${as_lineno-$LINENO}:   former value:  \`$ac_old_val'" >&5
+$as_echo "$as_me:   former value:  \`$ac_old_val'" >&2;}
+	{ $as_echo "$as_me:${as_lineno-$LINENO}:   current value: \`$ac_new_val'" >&5
+$as_echo "$as_me:   current value: \`$ac_new_val'" >&2;}
+      fi;;
+  esac
+  # Pass precious variables to config.status.
+  if test "$ac_new_set" = set; then
+    case $ac_new_val in
+    *\'*) ac_arg=$ac_var=`$as_echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
+    *) ac_arg=$ac_var=$ac_new_val ;;
+    esac
+    case " $ac_configure_args " in
+      *" '$ac_arg' "*) ;; # Avoid dups.  Use of quotes ensures accuracy.
+      *) as_fn_append ac_configure_args " '$ac_arg'" ;;
+    esac
+  fi
+done
+if $ac_cache_corrupted; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+  { $as_echo "$as_me:${as_lineno-$LINENO}: error: changes in the environment can compromise the build" >&5
+$as_echo "$as_me: error: changes in the environment can compromise the build" >&2;}
+  as_fn_error "run \`make distclean' and/or \`rm $cache_file' and start over" "$LINENO" 5
+fi
+## -------------------- ##
+## Main body of script. ##
+## -------------------- ##
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+
+# AC_CONFIG_HEADER([config.h])
+ac_aux_dir=
+for ac_dir in "$srcdir" "$srcdir/.." "$srcdir/../.."; do
+  for ac_t in install-sh install.sh shtool; do
+    if test -f "$ac_dir/$ac_t"; then
+      ac_aux_dir=$ac_dir
+      ac_install_sh="$ac_aux_dir/$ac_t -c"
+      break 2
+    fi
+  done
+done
+if test -z "$ac_aux_dir"; then
+  as_fn_error "cannot find install-sh, install.sh, or shtool in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" "$LINENO" 5
+fi
+
+# These three variables are undocumented and unsupported,
+# and are intended to be withdrawn in a future Autoconf release.
+# They can cause serious problems if a builder's source tree is in a directory
+# whose full name contains unusual characters.
+ac_config_guess="$SHELL $ac_aux_dir/config.guess"  # Please don't use this var.
+ac_config_sub="$SHELL $ac_aux_dir/config.sub"  # Please don't use this var.
+ac_configure="$SHELL $ac_aux_dir/configure"  # Please don't use this var.
+
+
+# Make sure we can run config.sub.
+$SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 ||
+  as_fn_error "cannot run $SHELL $ac_aux_dir/config.sub" "$LINENO" 5
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking build system type" >&5
+$as_echo_n "checking build system type... " >&6; }
+if test "${ac_cv_build+set}" = set; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_build_alias=$build_alias
+test "x$ac_build_alias" = x &&
+  ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"`
 test "x$ac_build_alias" = x &&
-  { { $as_echo "$as_me:$LINENO: error: cannot guess build type; you must specify one" >&5
-$as_echo "$as_me: error: cannot guess build type; you must specify one" >&2;}
-   { (exit 1); exit 1; }; }
+  as_fn_error "cannot guess build type; you must specify one" "$LINENO" 5
 ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` ||
-  { { $as_echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $ac_build_alias failed" >&5
-$as_echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $ac_build_alias failed" >&2;}
-   { (exit 1); exit 1; }; }
+  as_fn_error "$SHELL $ac_aux_dir/config.sub $ac_build_alias failed" "$LINENO" 5
 
 fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_build" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_build" >&5
 $as_echo "$ac_cv_build" >&6; }
 case $ac_cv_build in
 *-*-*) ;;
-*) { { $as_echo "$as_me:$LINENO: error: invalid value of canonical build" >&5
-$as_echo "$as_me: error: invalid value of canonical build" >&2;}
-   { (exit 1); exit 1; }; };;
+*) as_fn_error "invalid value of canonical build" "$LINENO" 5;;
 esac
 build=$ac_cv_build
 ac_save_IFS=$IFS; IFS='-'
@@ -2124,28 +2682,24 @@
 case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac
 
 
-{ $as_echo "$as_me:$LINENO: checking host system type" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking host system type" >&5
 $as_echo_n "checking host system type... " >&6; }
-if test "${ac_cv_host+set}" = set; then
+if test "${ac_cv_host+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
   if test "x$host_alias" = x; then
   ac_cv_host=$ac_cv_build
 else
   ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` ||
-    { { $as_echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $host_alias failed" >&5
-$as_echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $host_alias failed" >&2;}
-   { (exit 1); exit 1; }; }
+    as_fn_error "$SHELL $ac_aux_dir/config.sub $host_alias failed" "$LINENO" 5
 fi
 
 fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_host" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_host" >&5
 $as_echo "$ac_cv_host" >&6; }
 case $ac_cv_host in
 *-*-*) ;;
-*) { { $as_echo "$as_me:$LINENO: error: invalid value of canonical host" >&5
-$as_echo "$as_me: error: invalid value of canonical host" >&2;}
-   { (exit 1); exit 1; }; };;
+*) as_fn_error "invalid value of canonical host" "$LINENO" 5;;
 esac
 host=$ac_cv_host
 ac_save_IFS=$IFS; IFS='-'
@@ -2169,9 +2723,9 @@
 if test -n "$ac_tool_prefix"; then
   # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args.
 set dummy ${ac_tool_prefix}gcc; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 $as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_CC+set}" = set; then
+if test "${ac_cv_prog_CC+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
   if test -n "$CC"; then
@@ -2182,24 +2736,24 @@
 do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
   if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_CC="${ac_tool_prefix}gcc"
-    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
-done
+  done
 IFS=$as_save_IFS
 
 fi
 fi
 CC=$ac_cv_prog_CC
 if test -n "$CC"; then
-  { $as_echo "$as_me:$LINENO: result: $CC" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
 $as_echo "$CC" >&6; }
 else
-  { $as_echo "$as_me:$LINENO: result: no" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
 $as_echo "no" >&6; }
 fi
 
@@ -2209,9 +2763,9 @@
   ac_ct_CC=$CC
   # Extract the first word of "gcc", so it can be a program name with args.
 set dummy gcc; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 $as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
+if test "${ac_cv_prog_ac_ct_CC+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
   if test -n "$ac_ct_CC"; then
@@ -2222,24 +2776,24 @@
 do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
   if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_ac_ct_CC="gcc"
-    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
-done
+  done
 IFS=$as_save_IFS
 
 fi
 fi
 ac_ct_CC=$ac_cv_prog_ac_ct_CC
 if test -n "$ac_ct_CC"; then
-  { $as_echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5
 $as_echo "$ac_ct_CC" >&6; }
 else
-  { $as_echo "$as_me:$LINENO: result: no" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
 $as_echo "no" >&6; }
 fi
 
@@ -2248,7 +2802,7 @@
   else
     case $cross_compiling:$ac_tool_warned in
 yes:)
-{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
 ac_tool_warned=yes ;;
 esac
@@ -2262,9 +2816,9 @@
           if test -n "$ac_tool_prefix"; then
     # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args.
 set dummy ${ac_tool_prefix}cc; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 $as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_CC+set}" = set; then
+if test "${ac_cv_prog_CC+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
   if test -n "$CC"; then
@@ -2275,24 +2829,24 @@
 do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
   if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_CC="${ac_tool_prefix}cc"
-    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
-done
+  done
 IFS=$as_save_IFS
 
 fi
 fi
 CC=$ac_cv_prog_CC
 if test -n "$CC"; then
-  { $as_echo "$as_me:$LINENO: result: $CC" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
 $as_echo "$CC" >&6; }
 else
-  { $as_echo "$as_me:$LINENO: result: no" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
 $as_echo "no" >&6; }
 fi
 
@@ -2302,9 +2856,9 @@
 if test -z "$CC"; then
   # Extract the first word of "cc", so it can be a program name with args.
 set dummy cc; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 $as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_CC+set}" = set; then
+if test "${ac_cv_prog_CC+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
   if test -n "$CC"; then
@@ -2316,18 +2870,18 @@
 do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
   if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then
        ac_prog_rejected=yes
        continue
      fi
     ac_cv_prog_CC="cc"
-    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
-done
+  done
 IFS=$as_save_IFS
 
 if test $ac_prog_rejected = yes; then
@@ -2346,10 +2900,10 @@
 fi
 CC=$ac_cv_prog_CC
 if test -n "$CC"; then
-  { $as_echo "$as_me:$LINENO: result: $CC" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
 $as_echo "$CC" >&6; }
 else
-  { $as_echo "$as_me:$LINENO: result: no" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
 $as_echo "no" >&6; }
 fi
 
@@ -2361,9 +2915,9 @@
   do
     # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
 set dummy $ac_tool_prefix$ac_prog; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 $as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_CC+set}" = set; then
+if test "${ac_cv_prog_CC+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
   if test -n "$CC"; then
@@ -2374,24 +2928,24 @@
 do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
   if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_CC="$ac_tool_prefix$ac_prog"
-    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
-done
+  done
 IFS=$as_save_IFS
 
 fi
 fi
 CC=$ac_cv_prog_CC
 if test -n "$CC"; then
-  { $as_echo "$as_me:$LINENO: result: $CC" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
 $as_echo "$CC" >&6; }
 else
-  { $as_echo "$as_me:$LINENO: result: no" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
 $as_echo "no" >&6; }
 fi
 
@@ -2405,9 +2959,9 @@
 do
   # Extract the first word of "$ac_prog", so it can be a program name with args.
 set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 $as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
+if test "${ac_cv_prog_ac_ct_CC+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
   if test -n "$ac_ct_CC"; then
@@ -2418,24 +2972,24 @@
 do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
   if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_ac_ct_CC="$ac_prog"
-    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
-done
+  done
 IFS=$as_save_IFS
 
 fi
 fi
 ac_ct_CC=$ac_cv_prog_ac_ct_CC
 if test -n "$ac_ct_CC"; then
-  { $as_echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5
 $as_echo "$ac_ct_CC" >&6; }
 else
-  { $as_echo "$as_me:$LINENO: result: no" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
 $as_echo "no" >&6; }
 fi
 
@@ -2448,7 +3002,7 @@
   else
     case $cross_compiling:$ac_tool_warned in
 yes:)
-{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
 ac_tool_warned=yes ;;
 esac
@@ -2459,73 +3013,55 @@
 fi
 
 
-test -z "$CC" && { { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5
+test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-{ { $as_echo "$as_me:$LINENO: error: no acceptable C compiler found in \$PATH
-See \`config.log' for more details." >&5
-$as_echo "$as_me: error: no acceptable C compiler found in \$PATH
-See \`config.log' for more details." >&2;}
-   { (exit 1); exit 1; }; }; }
+as_fn_error "no acceptable C compiler found in \$PATH
+See \`config.log' for more details." "$LINENO" 5; }
 
 # Provide some information about the compiler.
-$as_echo "$as_me:$LINENO: checking for C compiler version" >&5
+$as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5
 set X $ac_compile
 ac_compiler=$2
-{ (ac_try="$ac_compiler --version >&5"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_compiler --version >&5") 2>&5
-  ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }
-{ (ac_try="$ac_compiler -v >&5"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_compiler -v >&5") 2>&5
-  ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }
-{ (ac_try="$ac_compiler -V >&5"
+for ac_option in --version -v -V -qversion; do
+  { { ac_try="$ac_compiler $ac_option >&5"
 case "(($ac_try" in
   *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
   *) ac_try_echo=$ac_try;;
 esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_compiler -V >&5") 2>&5
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_compiler $ac_option >&5") 2>conftest.err
   ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }
+  if test -s conftest.err; then
+    sed '10a\
+... rest of stderr output deleted ...
+         10q' conftest.err >conftest.er1
+    cat conftest.er1 >&5
+    rm -f conftest.er1 conftest.err
+  fi
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }
+done
 
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
-
+#include <stdio.h>
 int
 main ()
 {
+FILE *f = fopen ("conftest.out", "w");
+ return ferror (f) || fclose (f) != 0;
 
   ;
   return 0;
 }
 _ACEOF
 ac_clean_files_save=$ac_clean_files
-ac_clean_files="$ac_clean_files a.out a.out.dSYM a.exe b.out"
+ac_clean_files="$ac_clean_files a.out a.out.dSYM a.exe b.out conftest.out"
 # Try to create an executable without -o first, disregard a.out.
 # It will help us diagnose broken compilers, and finding out an intuition
 # of exeext.
-{ $as_echo "$as_me:$LINENO: checking for C compiler default output file name" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler default output file name" >&5
 $as_echo_n "checking for C compiler default output file name... " >&6; }
 ac_link_default=`$as_echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'`
 
@@ -2542,17 +3078,17 @@
 done
 rm -f $ac_rmfiles
 
-if { (ac_try="$ac_link_default"
+if { { ac_try="$ac_link_default"
 case "(($ac_try" in
   *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
   *) ac_try_echo=$ac_try;;
 esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
   (eval "$ac_link_default") 2>&5
   ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; then
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then :
   # Autoconf-2.13 could set the ac_cv_exeext variable to `no'.
 # So ignore a value of `no', otherwise this would lead to `EXEEXT = no'
 # in a Makefile.  We should not override ac_cv_exeext if it was cached,
@@ -2569,7 +3105,7 @@
 	# certainly right.
 	break;;
     *.* )
-        if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no;
+	if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no;
 	then :; else
 	   ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
 	fi
@@ -2588,84 +3124,75 @@
 else
   ac_file=''
 fi
-
-{ $as_echo "$as_me:$LINENO: result: $ac_file" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_file" >&5
 $as_echo "$ac_file" >&6; }
-if test -z "$ac_file"; then
+if test -z "$ac_file"; then :
   $as_echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
-{ { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5
+{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-{ { $as_echo "$as_me:$LINENO: error: C compiler cannot create executables
-See \`config.log' for more details." >&5
-$as_echo "$as_me: error: C compiler cannot create executables
-See \`config.log' for more details." >&2;}
-   { (exit 77); exit 77; }; }; }
+{ as_fn_set_status 77
+as_fn_error "C compiler cannot create executables
+See \`config.log' for more details." "$LINENO" 5; }; }
 fi
-
 ac_exeext=$ac_cv_exeext
 
 # Check that the compiler produces executables we can run.  If not, either
 # the compiler is broken, or we cross compile.
-{ $as_echo "$as_me:$LINENO: checking whether the C compiler works" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler works" >&5
 $as_echo_n "checking whether the C compiler works... " >&6; }
-# FIXME: These cross compiler hacks should be removed for Autoconf 3.0
 # If not cross compiling, check that we can run a simple program.
 if test "$cross_compiling" != yes; then
   if { ac_try='./$ac_file'
-  { (case "(($ac_try" in
+  { { case "(($ac_try" in
   *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
   *) ac_try_echo=$ac_try;;
 esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
   (eval "$ac_try") 2>&5
   ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; }; then
     cross_compiling=no
   else
     if test "$cross_compiling" = maybe; then
 	cross_compiling=yes
     else
-	{ { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5
+	{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-{ { $as_echo "$as_me:$LINENO: error: cannot run C compiled programs.
+as_fn_error "cannot run C compiled programs.
 If you meant to cross compile, use \`--host'.
-See \`config.log' for more details." >&5
-$as_echo "$as_me: error: cannot run C compiled programs.
-If you meant to cross compile, use \`--host'.
-See \`config.log' for more details." >&2;}
-   { (exit 1); exit 1; }; }; }
+See \`config.log' for more details." "$LINENO" 5; }
     fi
   fi
 fi
-{ $as_echo "$as_me:$LINENO: result: yes" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
 $as_echo "yes" >&6; }
 
-rm -f -r a.out a.out.dSYM a.exe conftest$ac_cv_exeext b.out
+rm -f -r a.out a.out.dSYM a.exe conftest$ac_cv_exeext b.out conftest.out
 ac_clean_files=$ac_clean_files_save
 # Check that the compiler produces executables we can run.  If not, either
 # the compiler is broken, or we cross compile.
-{ $as_echo "$as_me:$LINENO: checking whether we are cross compiling" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are cross compiling" >&5
 $as_echo_n "checking whether we are cross compiling... " >&6; }
-{ $as_echo "$as_me:$LINENO: result: $cross_compiling" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $cross_compiling" >&5
 $as_echo "$cross_compiling" >&6; }
 
-{ $as_echo "$as_me:$LINENO: checking for suffix of executables" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of executables" >&5
 $as_echo_n "checking for suffix of executables... " >&6; }
-if { (ac_try="$ac_link"
+if { { ac_try="$ac_link"
 case "(($ac_try" in
   *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
   *) ac_try_echo=$ac_try;;
 esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
   (eval "$ac_link") 2>&5
   ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; then
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then :
   # If both `conftest.exe' and `conftest' are `present' (well, observable)
 # catch `conftest.exe'.  For instance with Cygwin, `ls conftest' will
 # work properly (i.e., refer to `conftest.exe'), while it won't with
@@ -2680,32 +3207,24 @@
   esac
 done
 else
-  { { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5
+  { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-{ { $as_echo "$as_me:$LINENO: error: cannot compute suffix of executables: cannot compile and link
-See \`config.log' for more details." >&5
-$as_echo "$as_me: error: cannot compute suffix of executables: cannot compile and link
-See \`config.log' for more details." >&2;}
-   { (exit 1); exit 1; }; }; }
+as_fn_error "cannot compute suffix of executables: cannot compile and link
+See \`config.log' for more details." "$LINENO" 5; }
 fi
-
 rm -f conftest$ac_cv_exeext
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_exeext" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_exeext" >&5
 $as_echo "$ac_cv_exeext" >&6; }
 
 rm -f conftest.$ac_ext
 EXEEXT=$ac_cv_exeext
 ac_exeext=$EXEEXT
-{ $as_echo "$as_me:$LINENO: checking for suffix of object files" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of object files" >&5
 $as_echo_n "checking for suffix of object files... " >&6; }
-if test "${ac_cv_objext+set}" = set; then
+if test "${ac_cv_objext+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 
 int
@@ -2717,17 +3236,17 @@
 }
 _ACEOF
 rm -f conftest.o conftest.obj
-if { (ac_try="$ac_compile"
+if { { ac_try="$ac_compile"
 case "(($ac_try" in
   *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
   *) ac_try_echo=$ac_try;;
 esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
   (eval "$ac_compile") 2>&5
   ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; then
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then :
   for ac_file in conftest.o conftest.obj conftest.*; do
   test -f "$ac_file" || continue;
   case $ac_file in
@@ -2740,31 +3259,23 @@
   $as_echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
-{ { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5
+{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-{ { $as_echo "$as_me:$LINENO: error: cannot compute suffix of object files: cannot compile
-See \`config.log' for more details." >&5
-$as_echo "$as_me: error: cannot compute suffix of object files: cannot compile
-See \`config.log' for more details." >&2;}
-   { (exit 1); exit 1; }; }; }
+as_fn_error "cannot compute suffix of object files: cannot compile
+See \`config.log' for more details." "$LINENO" 5; }
 fi
-
 rm -f conftest.$ac_cv_objext conftest.$ac_ext
 fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_objext" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_objext" >&5
 $as_echo "$ac_cv_objext" >&6; }
 OBJEXT=$ac_cv_objext
 ac_objext=$OBJEXT
-{ $as_echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C compiler" >&5
 $as_echo_n "checking whether we are using the GNU C compiler... " >&6; }
-if test "${ac_cv_c_compiler_gnu+set}" = set; then
+if test "${ac_cv_c_compiler_gnu+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 
 int
@@ -2778,37 +3289,16 @@
   return 0;
 }
 _ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_compile") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest.$ac_objext; then
+if ac_fn_c_try_compile "$LINENO"; then :
   ac_compiler_gnu=yes
 else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-	ac_compiler_gnu=no
+  ac_compiler_gnu=no
 fi
-
 rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
 ac_cv_c_compiler_gnu=$ac_compiler_gnu
 
 fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_compiler_gnu" >&5
 $as_echo "$ac_cv_c_compiler_gnu" >&6; }
 if test $ac_compiler_gnu = yes; then
   GCC=yes
@@ -2817,20 +3307,16 @@
 fi
 ac_test_CFLAGS=${CFLAGS+set}
 ac_save_CFLAGS=$CFLAGS
-{ $as_echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5
 $as_echo_n "checking whether $CC accepts -g... " >&6; }
-if test "${ac_cv_prog_cc_g+set}" = set; then
+if test "${ac_cv_prog_cc_g+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
   ac_save_c_werror_flag=$ac_c_werror_flag
    ac_c_werror_flag=yes
    ac_cv_prog_cc_g=no
    CFLAGS="-g"
-   cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+   cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 
 int
@@ -2841,35 +3327,11 @@
   return 0;
 }
 _ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_compile") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest.$ac_objext; then
+if ac_fn_c_try_compile "$LINENO"; then :
   ac_cv_prog_cc_g=yes
 else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-	CFLAGS=""
-      cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+  CFLAGS=""
+      cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 
 int
@@ -2880,36 +3342,12 @@
   return 0;
 }
 _ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_compile") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest.$ac_objext; then
-  :
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
+if ac_fn_c_try_compile "$LINENO"; then :
 
-	ac_c_werror_flag=$ac_save_c_werror_flag
+else
+  ac_c_werror_flag=$ac_save_c_werror_flag
 	 CFLAGS="-g"
-	 cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+	 cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 
 int
@@ -2920,42 +3358,17 @@
   return 0;
 }
 _ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_compile") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest.$ac_objext; then
+if ac_fn_c_try_compile "$LINENO"; then :
   ac_cv_prog_cc_g=yes
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-
 fi
-
 rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
 fi
-
 rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
 fi
-
 rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
    ac_c_werror_flag=$ac_save_c_werror_flag
 fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_g" >&5
 $as_echo "$ac_cv_prog_cc_g" >&6; }
 if test "$ac_test_CFLAGS" = set; then
   CFLAGS=$ac_save_CFLAGS
@@ -2972,18 +3385,14 @@
     CFLAGS=
   fi
 fi
-{ $as_echo "$as_me:$LINENO: checking for $CC option to accept ISO C89" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5
 $as_echo_n "checking for $CC option to accept ISO C89... " >&6; }
-if test "${ac_cv_prog_cc_c89+set}" = set; then
+if test "${ac_cv_prog_cc_c89+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
   ac_cv_prog_cc_c89=no
 ac_save_CC=$CC
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 #include <stdarg.h>
 #include <stdio.h>
@@ -3040,32 +3449,9 @@
 	-Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
 do
   CC="$ac_save_CC $ac_arg"
-  rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_compile") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest.$ac_objext; then
+  if ac_fn_c_try_compile "$LINENO"; then :
   ac_cv_prog_cc_c89=$ac_arg
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-
 fi
-
 rm -f core conftest.err conftest.$ac_objext
   test "x$ac_cv_prog_cc_c89" != "xno" && break
 done
@@ -3076,17 +3462,19 @@
 # AC_CACHE_VAL
 case "x$ac_cv_prog_cc_c89" in
   x)
-    { $as_echo "$as_me:$LINENO: result: none needed" >&5
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5
 $as_echo "none needed" >&6; } ;;
   xno)
-    { $as_echo "$as_me:$LINENO: result: unsupported" >&5
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5
 $as_echo "unsupported" >&6; } ;;
   *)
     CC="$CC $ac_cv_prog_cc_c89"
-    { $as_echo "$as_me:$LINENO: result: $ac_cv_prog_cc_c89" >&5
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5
 $as_echo "$ac_cv_prog_cc_c89" >&6; } ;;
 esac
+if test "x$ac_cv_prog_cc_c89" != xno; then :
 
+fi
 
 ac_ext=c
 ac_cpp='$CPP $CPPFLAGS'
@@ -3100,14 +3488,14 @@
 ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
 ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
 ac_compiler_gnu=$ac_cv_c_compiler_gnu
-{ $as_echo "$as_me:$LINENO: checking how to run the C preprocessor" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to run the C preprocessor" >&5
 $as_echo_n "checking how to run the C preprocessor... " >&6; }
 # On Suns, sometimes $CPP names a directory.
 if test -n "$CPP" && test -d "$CPP"; then
   CPP=
 fi
 if test -z "$CPP"; then
-  if test "${ac_cv_prog_CPP+set}" = set; then
+  if test "${ac_cv_prog_CPP+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
       # Double quotes because CPP needs to be expanded
@@ -3122,11 +3510,7 @@
   # <limits.h> exists even on freestanding compilers.
   # On the NeXT, cc -E runs the code through the compiler's parser,
   # not just through cpp. "Syntax error" is here to catch this case.
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 #ifdef __STDC__
 # include <limits.h>
@@ -3135,78 +3519,34 @@
 #endif
 		     Syntax error
 _ACEOF
-if { (ac_try="$ac_cpp conftest.$ac_ext"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } >/dev/null && {
-	 test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       }; then
-  :
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
+if ac_fn_c_try_cpp "$LINENO"; then :
 
+else
   # Broken: fails on valid input.
 continue
 fi
-
 rm -f conftest.err conftest.$ac_ext
 
   # OK, works on sane cases.  Now check whether nonexistent headers
   # can be detected and how.
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 #include <ac_nonexistent.h>
 _ACEOF
-if { (ac_try="$ac_cpp conftest.$ac_ext"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } >/dev/null && {
-	 test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       }; then
+if ac_fn_c_try_cpp "$LINENO"; then :
   # Broken: success on invalid input.
 continue
 else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
   # Passes both tests.
 ac_preproc_ok=:
 break
 fi
-
 rm -f conftest.err conftest.$ac_ext
 
 done
 # Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
 rm -f conftest.err conftest.$ac_ext
-if $ac_preproc_ok; then
+if $ac_preproc_ok; then :
   break
 fi
 
@@ -3218,7 +3558,7 @@
 else
   ac_cv_prog_CPP=$CPP
 fi
-{ $as_echo "$as_me:$LINENO: result: $CPP" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $CPP" >&5
 $as_echo "$CPP" >&6; }
 ac_preproc_ok=false
 for ac_c_preproc_warn_flag in '' yes
@@ -3229,11 +3569,7 @@
   # <limits.h> exists even on freestanding compilers.
   # On the NeXT, cc -E runs the code through the compiler's parser,
   # not just through cpp. "Syntax error" is here to catch this case.
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 #ifdef __STDC__
 # include <limits.h>
@@ -3242,87 +3578,40 @@
 #endif
 		     Syntax error
 _ACEOF
-if { (ac_try="$ac_cpp conftest.$ac_ext"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } >/dev/null && {
-	 test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       }; then
-  :
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
+if ac_fn_c_try_cpp "$LINENO"; then :
 
+else
   # Broken: fails on valid input.
 continue
 fi
-
 rm -f conftest.err conftest.$ac_ext
 
   # OK, works on sane cases.  Now check whether nonexistent headers
   # can be detected and how.
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 #include <ac_nonexistent.h>
 _ACEOF
-if { (ac_try="$ac_cpp conftest.$ac_ext"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } >/dev/null && {
-	 test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       }; then
+if ac_fn_c_try_cpp "$LINENO"; then :
   # Broken: success on invalid input.
 continue
 else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
   # Passes both tests.
 ac_preproc_ok=:
 break
 fi
-
 rm -f conftest.err conftest.$ac_ext
 
 done
 # Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
 rm -f conftest.err conftest.$ac_ext
-if $ac_preproc_ok; then
-  :
+if $ac_preproc_ok; then :
+
 else
-  { { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5
+  { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-{ { $as_echo "$as_me:$LINENO: error: C preprocessor \"$CPP\" fails sanity check
-See \`config.log' for more details." >&5
-$as_echo "$as_me: error: C preprocessor \"$CPP\" fails sanity check
-See \`config.log' for more details." >&2;}
-   { (exit 1); exit 1; }; }; }
+as_fn_error "C preprocessor \"$CPP\" fails sanity check
+See \`config.log' for more details." "$LINENO" 5; }
 fi
 
 ac_ext=c
@@ -3332,9 +3621,9 @@
 ac_compiler_gnu=$ac_cv_c_compiler_gnu
 
 
-{ $as_echo "$as_me:$LINENO: checking for grep that handles long lines and -e" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for grep that handles long lines and -e" >&5
 $as_echo_n "checking for grep that handles long lines and -e... " >&6; }
-if test "${ac_cv_path_GREP+set}" = set; then
+if test "${ac_cv_path_GREP+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
   if test -z "$GREP"; then
@@ -3345,7 +3634,7 @@
 do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
-  for ac_prog in grep ggrep; do
+    for ac_prog in grep ggrep; do
     for ac_exec_ext in '' $ac_executable_extensions; do
       ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext"
       { test -f "$ac_path_GREP" && $as_test_x "$ac_path_GREP"; } || continue
@@ -3365,7 +3654,7 @@
     $as_echo 'GREP' >> "conftest.nl"
     "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break
     diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
-    ac_count=`expr $ac_count + 1`
+    as_fn_arith $ac_count + 1 && ac_count=$as_val
     if test $ac_count -gt ${ac_path_GREP_max-0}; then
       # Best one so far, save it but keep looking for a better one
       ac_cv_path_GREP="$ac_path_GREP"
@@ -3380,26 +3669,24 @@
       $ac_path_GREP_found && break 3
     done
   done
-done
+  done
 IFS=$as_save_IFS
   if test -z "$ac_cv_path_GREP"; then
-    { { $as_echo "$as_me:$LINENO: error: no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5
-$as_echo "$as_me: error: no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;}
-   { (exit 1); exit 1; }; }
+    as_fn_error "no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
   fi
 else
   ac_cv_path_GREP=$GREP
 fi
 
 fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_path_GREP" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_GREP" >&5
 $as_echo "$ac_cv_path_GREP" >&6; }
  GREP="$ac_cv_path_GREP"
 
 
-{ $as_echo "$as_me:$LINENO: checking for egrep" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for egrep" >&5
 $as_echo_n "checking for egrep... " >&6; }
-if test "${ac_cv_path_EGREP+set}" = set; then
+if test "${ac_cv_path_EGREP+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
   if echo a | $GREP -E '(a|b)' >/dev/null 2>&1
@@ -3413,7 +3700,7 @@
 do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
-  for ac_prog in egrep; do
+    for ac_prog in egrep; do
     for ac_exec_ext in '' $ac_executable_extensions; do
       ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext"
       { test -f "$ac_path_EGREP" && $as_test_x "$ac_path_EGREP"; } || continue
@@ -3433,7 +3720,7 @@
     $as_echo 'EGREP' >> "conftest.nl"
     "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break
     diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
-    ac_count=`expr $ac_count + 1`
+    as_fn_arith $ac_count + 1 && ac_count=$as_val
     if test $ac_count -gt ${ac_path_EGREP_max-0}; then
       # Best one so far, save it but keep looking for a better one
       ac_cv_path_EGREP="$ac_path_EGREP"
@@ -3448,12 +3735,10 @@
       $ac_path_EGREP_found && break 3
     done
   done
-done
+  done
 IFS=$as_save_IFS
   if test -z "$ac_cv_path_EGREP"; then
-    { { $as_echo "$as_me:$LINENO: error: no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5
-$as_echo "$as_me: error: no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;}
-   { (exit 1); exit 1; }; }
+    as_fn_error "no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
   fi
 else
   ac_cv_path_EGREP=$EGREP
@@ -3461,21 +3746,17 @@
 
    fi
 fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_path_EGREP" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_EGREP" >&5
 $as_echo "$ac_cv_path_EGREP" >&6; }
  EGREP="$ac_cv_path_EGREP"
 
 
-{ $as_echo "$as_me:$LINENO: checking for ANSI C header files" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ANSI C header files" >&5
 $as_echo_n "checking for ANSI C header files... " >&6; }
-if test "${ac_cv_header_stdc+set}" = set; then
+if test "${ac_cv_header_stdc+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 #include <stdlib.h>
 #include <stdarg.h>
@@ -3490,48 +3771,23 @@
   return 0;
 }
 _ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_compile") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest.$ac_objext; then
+if ac_fn_c_try_compile "$LINENO"; then :
   ac_cv_header_stdc=yes
 else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-	ac_cv_header_stdc=no
+  ac_cv_header_stdc=no
 fi
-
 rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
 
 if test $ac_cv_header_stdc = yes; then
   # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 #include <string.h>
 
 _ACEOF
 if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
-  $EGREP "memchr" >/dev/null 2>&1; then
-  :
+  $EGREP "memchr" >/dev/null 2>&1; then :
+
 else
   ac_cv_header_stdc=no
 fi
@@ -3541,18 +3797,14 @@
 
 if test $ac_cv_header_stdc = yes; then
   # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 #include <stdlib.h>
 
 _ACEOF
 if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
-  $EGREP "free" >/dev/null 2>&1; then
-  :
+  $EGREP "free" >/dev/null 2>&1; then :
+
 else
   ac_cv_header_stdc=no
 fi
@@ -3562,14 +3814,10 @@
 
 if test $ac_cv_header_stdc = yes; then
   # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi.
-  if test "$cross_compiling" = yes; then
+  if test "$cross_compiling" = yes; then :
   :
 else
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 #include <ctype.h>
 #include <stdlib.h>
@@ -3596,362 +3844,105 @@
   return 0;
 }
 _ACEOF
-rm -f conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_link") 2>&5
-  ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
-  { (case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_try") 2>&5
-  ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  :
-else
-  $as_echo "$as_me: program exited with status $ac_status" >&5
-$as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
+if ac_fn_c_try_run "$LINENO"; then :
 
-( exit $ac_status )
-ac_cv_header_stdc=no
+else
+  ac_cv_header_stdc=no
 fi
-rm -rf conftest.dSYM
-rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
+  conftest.$ac_objext conftest.beam conftest.$ac_ext
 fi
 
-
 fi
 fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_stdc" >&5
 $as_echo "$ac_cv_header_stdc" >&6; }
 if test $ac_cv_header_stdc = yes; then
 
-cat >>confdefs.h <<\_ACEOF
-#define STDC_HEADERS 1
-_ACEOF
+$as_echo "#define STDC_HEADERS 1" >>confdefs.h
 
 fi
 
 # On IRIX 5.3, sys/types and inttypes.h are conflicting.
+for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \
+		  inttypes.h stdint.h unistd.h
+do :
+  as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
+ac_fn_c_check_header_compile "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default
+"
+eval as_val=\$$as_ac_Header
+   if test "x$as_val" = x""yes; then :
+  cat >>confdefs.h <<_ACEOF
+#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
+_ACEOF
+
+fi
+
+done
+
 
 
+  ac_fn_c_check_header_mongrel "$LINENO" "minix/config.h" "ac_cv_header_minix_config_h" "$ac_includes_default"
+if test "x$ac_cv_header_minix_config_h" = x""yes; then :
+  MINIX=yes
+else
+  MINIX=
+fi
 
 
+  if test "$MINIX" = yes; then
 
+$as_echo "#define _POSIX_SOURCE 1" >>confdefs.h
 
 
+$as_echo "#define _POSIX_1_SOURCE 2" >>confdefs.h
 
 
-for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \
-		  inttypes.h stdint.h unistd.h
-do
-as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
-{ $as_echo "$as_me:$LINENO: checking for $ac_header" >&5
-$as_echo_n "checking for $ac_header... " >&6; }
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
+$as_echo "#define _MINIX 1" >>confdefs.h
+
+  fi
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether it is safe to define __EXTENSIONS__" >&5
+$as_echo_n "checking whether it is safe to define __EXTENSIONS__... " >&6; }
+if test "${ac_cv_safe_to_define___extensions__+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
-$ac_includes_default
 
-#include <$ac_header>
+#	  define __EXTENSIONS__ 1
+	  $ac_includes_default
+int
+main ()
+{
+
+  ;
+  return 0;
+}
 _ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_compile") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest.$ac_objext; then
-  eval "$as_ac_Header=yes"
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_cv_safe_to_define___extensions__=yes
 else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-	eval "$as_ac_Header=no"
+  ac_cv_safe_to_define___extensions__=no
 fi
-
 rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
 fi
-ac_res=`eval 'as_val=${'$as_ac_Header'}
-		 $as_echo "$as_val"'`
-	       { $as_echo "$as_me:$LINENO: result: $ac_res" >&5
-$as_echo "$ac_res" >&6; }
-as_val=`eval 'as_val=${'$as_ac_Header'}
-		 $as_echo "$as_val"'`
-   if test "x$as_val" = x""yes; then
-  cat >>confdefs.h <<_ACEOF
-#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
-_ACEOF
-
-fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_safe_to_define___extensions__" >&5
+$as_echo "$ac_cv_safe_to_define___extensions__" >&6; }
+  test $ac_cv_safe_to_define___extensions__ = yes &&
+    $as_echo "#define __EXTENSIONS__ 1" >>confdefs.h
 
-done
+  $as_echo "#define _ALL_SOURCE 1" >>confdefs.h
 
+  $as_echo "#define _GNU_SOURCE 1" >>confdefs.h
 
+  $as_echo "#define _POSIX_PTHREAD_SEMANTICS 1" >>confdefs.h
 
-  if test "${ac_cv_header_minix_config_h+set}" = set; then
-  { $as_echo "$as_me:$LINENO: checking for minix/config.h" >&5
-$as_echo_n "checking for minix/config.h... " >&6; }
-if test "${ac_cv_header_minix_config_h+set}" = set; then
-  $as_echo_n "(cached) " >&6
-fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_header_minix_config_h" >&5
-$as_echo "$ac_cv_header_minix_config_h" >&6; }
-else
-  # Is the header compilable?
-{ $as_echo "$as_me:$LINENO: checking minix/config.h usability" >&5
-$as_echo_n "checking minix/config.h usability... " >&6; }
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-$ac_includes_default
-#include <minix/config.h>
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_compile") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest.$ac_objext; then
-  ac_header_compiler=yes
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
+  $as_echo "#define _TANDEM_SOURCE 1" >>confdefs.h
 
-	ac_header_compiler=no
-fi
 
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-{ $as_echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
-$as_echo "$ac_header_compiler" >&6; }
-
-# Is the header present?
-{ $as_echo "$as_me:$LINENO: checking minix/config.h presence" >&5
-$as_echo_n "checking minix/config.h presence... " >&6; }
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-#include <minix/config.h>
-_ACEOF
-if { (ac_try="$ac_cpp conftest.$ac_ext"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } >/dev/null && {
-	 test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       }; then
-  ac_header_preproc=yes
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-  ac_header_preproc=no
-fi
-
-rm -f conftest.err conftest.$ac_ext
-{ $as_echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
-$as_echo "$ac_header_preproc" >&6; }
-
-# So?  What about this header?
-case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in
-  yes:no: )
-    { $as_echo "$as_me:$LINENO: WARNING: minix/config.h: accepted by the compiler, rejected by the preprocessor!" >&5
-$as_echo "$as_me: WARNING: minix/config.h: accepted by the compiler, rejected by the preprocessor!" >&2;}
-    { $as_echo "$as_me:$LINENO: WARNING: minix/config.h: proceeding with the compiler's result" >&5
-$as_echo "$as_me: WARNING: minix/config.h: proceeding with the compiler's result" >&2;}
-    ac_header_preproc=yes
-    ;;
-  no:yes:* )
-    { $as_echo "$as_me:$LINENO: WARNING: minix/config.h: present but cannot be compiled" >&5
-$as_echo "$as_me: WARNING: minix/config.h: present but cannot be compiled" >&2;}
-    { $as_echo "$as_me:$LINENO: WARNING: minix/config.h:     check for missing prerequisite headers?" >&5
-$as_echo "$as_me: WARNING: minix/config.h:     check for missing prerequisite headers?" >&2;}
-    { $as_echo "$as_me:$LINENO: WARNING: minix/config.h: see the Autoconf documentation" >&5
-$as_echo "$as_me: WARNING: minix/config.h: see the Autoconf documentation" >&2;}
-    { $as_echo "$as_me:$LINENO: WARNING: minix/config.h:     section \"Present But Cannot Be Compiled\"" >&5
-$as_echo "$as_me: WARNING: minix/config.h:     section \"Present But Cannot Be Compiled\"" >&2;}
-    { $as_echo "$as_me:$LINENO: WARNING: minix/config.h: proceeding with the preprocessor's result" >&5
-$as_echo "$as_me: WARNING: minix/config.h: proceeding with the preprocessor's result" >&2;}
-    { $as_echo "$as_me:$LINENO: WARNING: minix/config.h: in the future, the compiler will take precedence" >&5
-$as_echo "$as_me: WARNING: minix/config.h: in the future, the compiler will take precedence" >&2;}
-    ( cat <<\_ASBOX
-## --------------------------------------------------- ##
-## Report this to oleh_derevenko@users.sourceforge.net ##
-## --------------------------------------------------- ##
-_ASBOX
-     ) | sed "s/^/$as_me: WARNING:     /" >&2
-    ;;
-esac
-{ $as_echo "$as_me:$LINENO: checking for minix/config.h" >&5
-$as_echo_n "checking for minix/config.h... " >&6; }
-if test "${ac_cv_header_minix_config_h+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
-  ac_cv_header_minix_config_h=$ac_header_preproc
-fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_header_minix_config_h" >&5
-$as_echo "$ac_cv_header_minix_config_h" >&6; }
-
-fi
-if test "x$ac_cv_header_minix_config_h" = x""yes; then
-  MINIX=yes
-else
-  MINIX=
-fi
-
-
-  if test "$MINIX" = yes; then
-
-cat >>confdefs.h <<\_ACEOF
-#define _POSIX_SOURCE 1
-_ACEOF
-
-
-cat >>confdefs.h <<\_ACEOF
-#define _POSIX_1_SOURCE 2
-_ACEOF
-
-
-cat >>confdefs.h <<\_ACEOF
-#define _MINIX 1
-_ACEOF
-
-  fi
-
-
-
-  { $as_echo "$as_me:$LINENO: checking whether it is safe to define __EXTENSIONS__" >&5
-$as_echo_n "checking whether it is safe to define __EXTENSIONS__... " >&6; }
-if test "${ac_cv_safe_to_define___extensions__+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-#	  define __EXTENSIONS__ 1
-	  $ac_includes_default
-int
-main ()
-{
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_compile") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest.$ac_objext; then
-  ac_cv_safe_to_define___extensions__=yes
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-	ac_cv_safe_to_define___extensions__=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_safe_to_define___extensions__" >&5
-$as_echo "$ac_cv_safe_to_define___extensions__" >&6; }
-  test $ac_cv_safe_to_define___extensions__ = yes &&
-    cat >>confdefs.h <<\_ACEOF
-#define __EXTENSIONS__ 1
-_ACEOF
-
-  cat >>confdefs.h <<\_ACEOF
-#define _ALL_SOURCE 1
-_ACEOF
-
-  cat >>confdefs.h <<\_ACEOF
-#define _GNU_SOURCE 1
-_ACEOF
-
-  cat >>confdefs.h <<\_ACEOF
-#define _POSIX_PTHREAD_SEMANTICS 1
-_ACEOF
-
-  cat >>confdefs.h <<\_ACEOF
-#define _TANDEM_SOURCE 1
-_ACEOF
-
-
-am__api_version='1.10'
+am__api_version='1.11'
 
 # Find a good install program.  We prefer a C program (faster),
 # so one script is as good as another.  But avoid the broken or
@@ -3967,10 +3958,10 @@
 # OS/2's system install, which has a completely different semantic
 # ./install, which can be erroneously created by make from ./install.sh.
 # Reject install programs that cannot install multiple files.
-{ $as_echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a BSD-compatible install" >&5
 $as_echo_n "checking for a BSD-compatible install... " >&6; }
 if test -z "$INSTALL"; then
-if test "${ac_cv_path_install+set}" = set; then
+if test "${ac_cv_path_install+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
   as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
@@ -3978,11 +3969,11 @@
 do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
-  # Account for people who put trailing slashes in PATH elements.
-case $as_dir/ in
-  ./ | .// | /cC/* | \
+    # Account for people who put trailing slashes in PATH elements.
+case $as_dir/ in #((
+  ./ | .// | /[cC]/* | \
   /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \
-  ?:\\/os2\\/install\\/* | ?:\\/OS2\\/INSTALL\\/* | \
+  ?:[\\/]os2[\\/]install[\\/]* | ?:[\\/]OS2[\\/]INSTALL[\\/]* | \
   /usr/ucb/* ) ;;
   *)
     # OSF1 and SCO ODT 3.0 have their own names for install.
@@ -4019,7 +4010,7 @@
     ;;
 esac
 
-done
+  done
 IFS=$as_save_IFS
 
 rm -rf conftest.one conftest.two conftest.dir
@@ -4035,7 +4026,7 @@
     INSTALL=$ac_install_sh
   fi
 fi
-{ $as_echo "$as_me:$LINENO: result: $INSTALL" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $INSTALL" >&5
 $as_echo "$INSTALL" >&6; }
 
 # Use test -z because SunOS4 sh mishandles braces in ${var-val}.
@@ -4046,21 +4037,34 @@
 
 test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
 
-{ $as_echo "$as_me:$LINENO: checking whether build environment is sane" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether build environment is sane" >&5
 $as_echo_n "checking whether build environment is sane... " >&6; }
 # Just in case
 sleep 1
 echo timestamp > conftest.file
+# Reject unsafe characters in $srcdir or the absolute working directory
+# name.  Accept space and tab only in the latter.
+am_lf='
+'
+case `pwd` in
+  *[\\\"\#\$\&\'\`$am_lf]*)
+    as_fn_error "unsafe absolute working directory name" "$LINENO" 5;;
+esac
+case $srcdir in
+  *[\\\"\#\$\&\'\`$am_lf\ \	]*)
+    as_fn_error "unsafe srcdir value: \`$srcdir'" "$LINENO" 5;;
+esac
+
 # Do `set' in a subshell so we don't clobber the current shell's
 # arguments.  Must try -L first in case configure is actually a
 # symlink; some systems play weird games with the mod time of symlinks
 # (eg FreeBSD returns the mod time of the symlink's containing
 # directory).
 if (
-   set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null`
+   set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`
    if test "$*" = "X"; then
       # -L didn't work.
-      set X `ls -t $srcdir/configure conftest.file`
+      set X `ls -t "$srcdir/configure" conftest.file`
    fi
    rm -f conftest.file
    if test "$*" != "X $srcdir/configure conftest.file" \
@@ -4070,11 +4074,8 @@
       # if, for instance, CONFIG_SHELL is bash and it inherits a
       # broken ls alias from the environment.  This has actually
       # happened.  Such a system could not be considered "sane".
-      { { $as_echo "$as_me:$LINENO: error: ls -t appears to fail.  Make sure there is not a broken
-alias in your environment" >&5
-$as_echo "$as_me: error: ls -t appears to fail.  Make sure there is not a broken
-alias in your environment" >&2;}
-   { (exit 1); exit 1; }; }
+      as_fn_error "ls -t appears to fail.  Make sure there is not a broken
+alias in your environment" "$LINENO" 5
    fi
 
    test "$2" = conftest.file
@@ -4083,13 +4084,10 @@
    # Ok.
    :
 else
-   { { $as_echo "$as_me:$LINENO: error: newly created file is older than distributed files!
-Check your system clock" >&5
-$as_echo "$as_me: error: newly created file is older than distributed files!
-Check your system clock" >&2;}
-   { (exit 1); exit 1; }; }
+   as_fn_error "newly created file is older than distributed files!
+Check your system clock" "$LINENO" 5
 fi
-{ $as_echo "$as_me:$LINENO: result: yes" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
 $as_echo "yes" >&6; }
 test "$program_prefix" != NONE &&
   program_transform_name="s&^&$program_prefix&;$program_transform_name"
@@ -4104,20 +4102,136 @@
 # expand $ac_aux_dir to an absolute path
 am_aux_dir=`cd $ac_aux_dir && pwd`
 
-test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing"
+if test x"${MISSING+set}" != xset; then
+  case $am_aux_dir in
+  *\ * | *\	*)
+    MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;;
+  *)
+    MISSING="\${SHELL} $am_aux_dir/missing" ;;
+  esac
+fi
 # Use eval to expand $SHELL
 if eval "$MISSING --run true"; then
   am_missing_run="$MISSING --run "
 else
   am_missing_run=
-  { $as_echo "$as_me:$LINENO: WARNING: \`missing' script is too old or missing" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`missing' script is too old or missing" >&5
 $as_echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;}
 fi
 
-{ $as_echo "$as_me:$LINENO: checking for a thread-safe mkdir -p" >&5
+if test x"${install_sh}" != xset; then
+  case $am_aux_dir in
+  *\ * | *\	*)
+    install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;;
+  *)
+    install_sh="\${SHELL} $am_aux_dir/install-sh"
+  esac
+fi
+
+# Installed binaries are usually stripped using `strip' when the user
+# run `make install-strip'.  However `strip' might not be the right
+# tool to use in cross-compilation environments, therefore Automake
+# will honor the `STRIP' environment variable to overrule this program.
+if test "$cross_compiling" != no; then
+  if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
+set dummy ${ac_tool_prefix}strip; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_STRIP+set}" = set; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$STRIP"; then
+  ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_STRIP="${ac_tool_prefix}strip"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+STRIP=$ac_cv_prog_STRIP
+if test -n "$STRIP"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5
+$as_echo "$STRIP" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_STRIP"; then
+  ac_ct_STRIP=$STRIP
+  # Extract the first word of "strip", so it can be a program name with args.
+set dummy strip; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_STRIP"; then
+  ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_STRIP="strip"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
+if test -n "$ac_ct_STRIP"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5
+$as_echo "$ac_ct_STRIP" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+  if test "x$ac_ct_STRIP" = x; then
+    STRIP=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    STRIP=$ac_ct_STRIP
+  fi
+else
+  STRIP="$ac_cv_prog_STRIP"
+fi
+
+fi
+INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a thread-safe mkdir -p" >&5
 $as_echo_n "checking for a thread-safe mkdir -p... " >&6; }
 if test -z "$MKDIR_P"; then
-  if test "${ac_cv_path_mkdir+set}" = set; then
+  if test "${ac_cv_path_mkdir+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
   as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
@@ -4125,7 +4239,7 @@
 do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
-  for ac_prog in mkdir gmkdir; do
+    for ac_prog in mkdir gmkdir; do
 	 for ac_exec_ext in '' $ac_executable_extensions; do
 	   { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; } || continue
 	   case `"$as_dir/$ac_prog$ac_exec_ext" --version 2>&1` in #(
@@ -4137,7 +4251,7 @@
 	   esac
 	 done
        done
-done
+  done
 IFS=$as_save_IFS
 
 fi
@@ -4153,7 +4267,7 @@
     MKDIR_P="$ac_install_sh -d"
   fi
 fi
-{ $as_echo "$as_me:$LINENO: result: $MKDIR_P" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $MKDIR_P" >&5
 $as_echo "$MKDIR_P" >&6; }
 
 mkdir_p="$MKDIR_P"
@@ -4166,9 +4280,9 @@
 do
   # Extract the first word of "$ac_prog", so it can be a program name with args.
 set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 $as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_AWK+set}" = set; then
+if test "${ac_cv_prog_AWK+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
   if test -n "$AWK"; then
@@ -4179,24 +4293,24 @@
 do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
   if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_AWK="$ac_prog"
-    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
-done
+  done
 IFS=$as_save_IFS
 
 fi
 fi
 AWK=$ac_cv_prog_AWK
 if test -n "$AWK"; then
-  { $as_echo "$as_me:$LINENO: result: $AWK" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AWK" >&5
 $as_echo "$AWK" >&6; }
 else
-  { $as_echo "$as_me:$LINENO: result: no" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
 $as_echo "no" >&6; }
 fi
 
@@ -4204,11 +4318,11 @@
   test -n "$AWK" && break
 done
 
-{ $as_echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ${MAKE-make} sets \$(MAKE)" >&5
 $as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; }
 set x ${MAKE-make}
 ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'`
-if { as_var=ac_cv_prog_make_${ac_make}_set; eval "test \"\${$as_var+set}\" = set"; }; then
+if { as_var=ac_cv_prog_make_${ac_make}_set; eval "test \"\${$as_var+set}\" = set"; }; then :
   $as_echo_n "(cached) " >&6
 else
   cat >conftest.make <<\_ACEOF
@@ -4226,11 +4340,11 @@
 rm -f conftest.make
 fi
 if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then
-  { $as_echo "$as_me:$LINENO: result: yes" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
 $as_echo "yes" >&6; }
   SET_MAKE=
 else
-  { $as_echo "$as_me:$LINENO: result: no" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
 $as_echo "no" >&6; }
   SET_MAKE="MAKE=${MAKE-make}"
 fi
@@ -4252,44 +4366,44 @@
 am_make=${MAKE-make}
 cat > confinc << 'END'
 am__doit:
-	@echo done
+	@echo this is the am__doit target
 .PHONY: am__doit
 END
 # If we don't find an include directive, just comment out the code.
-{ $as_echo "$as_me:$LINENO: checking for style of include used by $am_make" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for style of include used by $am_make" >&5
 $as_echo_n "checking for style of include used by $am_make... " >&6; }
 am__include="#"
 am__quote=
 _am_result=none
 # First try GNU make style include.
 echo "include confinc" > confmf
-# We grep out `Entering directory' and `Leaving directory'
-# messages which can occur if `w' ends up in MAKEFLAGS.
-# In particular we don't look at `^make:' because GNU make might
-# be invoked under some other name (usually "gmake"), in which
-# case it prints its new name instead of `make'.
-if test "`$am_make -s -f confmf 2> /dev/null | grep -v 'ing directory'`" = "done"; then
-   am__include=include
-   am__quote=
-   _am_result=GNU
-fi
+# Ignore all kinds of additional output from `make'.
+case `$am_make -s -f confmf 2> /dev/null` in #(
+*the\ am__doit\ target*)
+  am__include=include
+  am__quote=
+  _am_result=GNU
+  ;;
+esac
 # Now try BSD make style include.
 if test "$am__include" = "#"; then
    echo '.include "confinc"' > confmf
-   if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then
-      am__include=.include
-      am__quote="\""
-      _am_result=BSD
-   fi
+   case `$am_make -s -f confmf 2> /dev/null` in #(
+   *the\ am__doit\ target*)
+     am__include=.include
+     am__quote="\""
+     _am_result=BSD
+     ;;
+   esac
 fi
 
 
-{ $as_echo "$as_me:$LINENO: result: $_am_result" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $_am_result" >&5
 $as_echo "$_am_result" >&6; }
 rm -f confinc confmf
 
 # Check whether --enable-dependency-tracking was given.
-if test "${enable_dependency_tracking+set}" = set; then
+if test "${enable_dependency_tracking+set}" = set; then :
   enableval=$enable_dependency_tracking;
 fi
 
@@ -4312,9 +4426,7 @@
   am__isrc=' -I$(srcdir)'
   # test to see if srcdir already configured
   if test -f $srcdir/config.status; then
-    { { $as_echo "$as_me:$LINENO: error: source directory already configured; run \"make distclean\" there first" >&5
-$as_echo "$as_me: error: source directory already configured; run \"make distclean\" there first" >&2;}
-   { (exit 1); exit 1; }; }
+    as_fn_error "source directory already configured; run \"make distclean\" there first" "$LINENO" 5
   fi
 fi
 
@@ -4358,124 +4470,22 @@
 
 MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"}
 
-install_sh=${install_sh-"\$(SHELL) $am_aux_dir/install-sh"}
+# We need awk for the "check" target.  The system "awk" is bad on
+# some platforms.
+# Always define AMTAR for backward compatibility.
 
-# Installed binaries are usually stripped using `strip' when the user
-# run `make install-strip'.  However `strip' might not be the right
-# tool to use in cross-compilation environments, therefore Automake
-# will honor the `STRIP' environment variable to overrule this program.
-if test "$cross_compiling" != no; then
-  if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
-set dummy ${ac_tool_prefix}strip; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_STRIP+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$STRIP"; then
-  ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-    ac_cv_prog_STRIP="${ac_tool_prefix}strip"
-    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-IFS=$as_save_IFS
+AMTAR=${AMTAR-"${am_missing_run}tar"}
 
-fi
-fi
-STRIP=$ac_cv_prog_STRIP
-if test -n "$STRIP"; then
-  { $as_echo "$as_me:$LINENO: result: $STRIP" >&5
-$as_echo "$STRIP" >&6; }
-else
-  { $as_echo "$as_me:$LINENO: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-fi
-if test -z "$ac_cv_prog_STRIP"; then
-  ac_ct_STRIP=$STRIP
-  # Extract the first word of "strip", so it can be a program name with args.
-set dummy strip; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$ac_ct_STRIP"; then
-  ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-    ac_cv_prog_ac_ct_STRIP="strip"
-    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-IFS=$as_save_IFS
-
-fi
-fi
-ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
-if test -n "$ac_ct_STRIP"; then
-  { $as_echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5
-$as_echo "$ac_ct_STRIP" >&6; }
-else
-  { $as_echo "$as_me:$LINENO: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-  if test "x$ac_ct_STRIP" = x; then
-    STRIP=":"
-  else
-    case $cross_compiling:$ac_tool_warned in
-yes:)
-{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5
-$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
-ac_tool_warned=yes ;;
-esac
-    STRIP=$ac_ct_STRIP
-  fi
-else
-  STRIP="$ac_cv_prog_STRIP"
-fi
-
-fi
-INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
-
-# We need awk for the "check" target.  The system "awk" is bad on
-# some platforms.
-# Always define AMTAR for backward compatibility.
-
-AMTAR=${AMTAR-"${am_missing_run}tar"}
-
-am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'
+am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'
 
 
 
 
 depcc="$CC"   am_compiler_list=
 
-{ $as_echo "$as_me:$LINENO: checking dependency style of $depcc" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5
 $as_echo_n "checking dependency style of $depcc... " >&6; }
-if test "${am_cv_CC_dependencies_compiler_type+set}" = set; then
+if test "${am_cv_CC_dependencies_compiler_type+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
   if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
@@ -4501,6 +4511,11 @@
   if test "$am_compiler_list" = ""; then
      am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp`
   fi
+  am__universal=false
+  case " $depcc " in #(
+     *\ -arch\ *\ -arch\ *) am__universal=true ;;
+     esac
+
   for depmode in $am_compiler_list; do
     # Setup a source with many dependencies, because some compilers
     # like to wrap large dependency lists on column 80 (with \), and
@@ -4518,7 +4533,17 @@
     done
     echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
 
+    # We check with `-c' and `-o' for the sake of the "dashmstdout"
+    # mode.  It turns out that the SunPro C++ compiler does not properly
+    # handle `-M -o', and we need to detect this.  Also, some Intel
+    # versions had trouble with output in subdirs
+    am__obj=sub/conftest.${OBJEXT-o}
+    am__minus_obj="-o $am__obj"
     case $depmode in
+    gcc)
+      # This depmode causes a compiler race in universal mode.
+      test "$am__universal" = false || continue
+      ;;
     nosideeffect)
       # after this tag, mechanisms are not by side-effect, so they'll
       # only be used when explicitly requested
@@ -4528,19 +4553,23 @@
 	break
       fi
       ;;
+    msvisualcpp | msvcmsys)
+      # This compiler won't grok `-c -o', but also, the minuso test has
+      # not run yet.  These depmodes are late enough in the game, and
+      # so weak that their functioning should not be impacted.
+      am__obj=conftest.${OBJEXT-o}
+      am__minus_obj=
+      ;;
     none) break ;;
     esac
-    # We check with `-c' and `-o' for the sake of the "dashmstdout"
-    # mode.  It turns out that the SunPro C++ compiler does not properly
-    # handle `-M -o', and we need to detect this.
     if depmode=$depmode \
-       source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \
+       source=sub/conftest.c object=$am__obj \
        depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
-       $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \
+       $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \
          >/dev/null 2>conftest.err &&
        grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
        grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
-       grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 &&
+       grep $am__obj sub/conftest.Po > /dev/null 2>&1 &&
        ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
       # icc doesn't choke on unknown options, it will just issue warnings
       # or remarks (even with -Werror).  So we grep stderr for any message
@@ -4564,7 +4593,7 @@
 fi
 
 fi
-{ $as_echo "$as_me:$LINENO: result: $am_cv_CC_dependencies_compiler_type" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_CC_dependencies_compiler_type" >&5
 $as_echo "$am_cv_CC_dependencies_compiler_type" >&6; }
 CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type
 
@@ -4581,38 +4610,38 @@
 
 
 
-{ $as_echo "$as_me:$LINENO: checking target OS" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking target OS" >&5
 $as_echo_n "checking target OS... " >&6; }
 case "$host_os" in
   cygwin* | mingw*)
     targetos=_OU_TARGET_OS_WINDOWS
     CXXFLAGS+="-mthreads $CXXFLAGS"
-    { $as_echo "$as_me:$LINENO: result: win32" >&5
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: win32" >&5
 $as_echo "win32" >&6; }
     ;;
   *qnx*)
     targetos=_OU_TARGET_OS_QNX
-    { $as_echo "$as_me:$LINENO: result: qnx" >&5
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: qnx" >&5
 $as_echo "qnx" >&6; }
     ;;
   *apple* | *darwin*)
     targetos=_OU_TARGET_OS_MAC
-    { $as_echo "$as_me:$LINENO: result: darwin" >&5
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: darwin" >&5
 $as_echo "darwin" >&6; }
     ;;
   *sunos*)
     targetos=_OU_TARGET_OS_SUNOS
-    { $as_echo "$as_me:$LINENO: result: sunos" >&5
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: sunos" >&5
 $as_echo "sunos" >&6; }
     ;;
   *aix*)
     targetos=_OU_TARGET_OS_AIX
-    { $as_echo "$as_me:$LINENO: result: aix" >&5
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: aix" >&5
 $as_echo "aix" >&6; }
     ;;
   *)
     targetos=_OU_TARGET_OS_GENUNIX
-    { $as_echo "$as_me:$LINENO: result: unix" >&5
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: unix" >&5
 $as_echo "unix" >&6; }
     ;;
 esac
@@ -4638,9 +4667,9 @@
   do
     # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
 set dummy $ac_tool_prefix$ac_prog; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 $as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_CXX+set}" = set; then
+if test "${ac_cv_prog_CXX+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
   if test -n "$CXX"; then
@@ -4651,24 +4680,24 @@
 do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
   if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_CXX="$ac_tool_prefix$ac_prog"
-    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
-done
+  done
 IFS=$as_save_IFS
 
 fi
 fi
 CXX=$ac_cv_prog_CXX
 if test -n "$CXX"; then
-  { $as_echo "$as_me:$LINENO: result: $CXX" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CXX" >&5
 $as_echo "$CXX" >&6; }
 else
-  { $as_echo "$as_me:$LINENO: result: no" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
 $as_echo "no" >&6; }
 fi
 
@@ -4682,9 +4711,9 @@
 do
   # Extract the first word of "$ac_prog", so it can be a program name with args.
 set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 $as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_ac_ct_CXX+set}" = set; then
+if test "${ac_cv_prog_ac_ct_CXX+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
   if test -n "$ac_ct_CXX"; then
@@ -4695,24 +4724,24 @@
 do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
   if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_ac_ct_CXX="$ac_prog"
-    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
-done
+  done
 IFS=$as_save_IFS
 
 fi
 fi
 ac_ct_CXX=$ac_cv_prog_ac_ct_CXX
 if test -n "$ac_ct_CXX"; then
-  { $as_echo "$as_me:$LINENO: result: $ac_ct_CXX" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CXX" >&5
 $as_echo "$ac_ct_CXX" >&6; }
 else
-  { $as_echo "$as_me:$LINENO: result: no" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
 $as_echo "no" >&6; }
 fi
 
@@ -4725,7 +4754,7 @@
   else
     case $cross_compiling:$ac_tool_warned in
 yes:)
-{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
 ac_tool_warned=yes ;;
 esac
@@ -4736,53 +4765,36 @@
   fi
 fi
 # Provide some information about the compiler.
-$as_echo "$as_me:$LINENO: checking for C++ compiler version" >&5
+$as_echo "$as_me:${as_lineno-$LINENO}: checking for C++ compiler version" >&5
 set X $ac_compile
 ac_compiler=$2
-{ (ac_try="$ac_compiler --version >&5"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_compiler --version >&5") 2>&5
-  ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }
-{ (ac_try="$ac_compiler -v >&5"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_compiler -v >&5") 2>&5
-  ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }
-{ (ac_try="$ac_compiler -V >&5"
+for ac_option in --version -v -V -qversion; do
+  { { ac_try="$ac_compiler $ac_option >&5"
 case "(($ac_try" in
   *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
   *) ac_try_echo=$ac_try;;
 esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_compiler -V >&5") 2>&5
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_compiler $ac_option >&5") 2>conftest.err
   ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }
+  if test -s conftest.err; then
+    sed '10a\
+... rest of stderr output deleted ...
+         10q' conftest.err >conftest.er1
+    cat conftest.er1 >&5
+    rm -f conftest.er1 conftest.err
+  fi
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }
+done
 
-{ $as_echo "$as_me:$LINENO: checking whether we are using the GNU C++ compiler" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C++ compiler" >&5
 $as_echo_n "checking whether we are using the GNU C++ compiler... " >&6; }
-if test "${ac_cv_cxx_compiler_gnu+set}" = set; then
+if test "${ac_cv_cxx_compiler_gnu+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 
 int
@@ -4796,37 +4808,16 @@
   return 0;
 }
 _ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_compile") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_cxx_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest.$ac_objext; then
+if ac_fn_cxx_try_compile "$LINENO"; then :
   ac_compiler_gnu=yes
 else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-	ac_compiler_gnu=no
+  ac_compiler_gnu=no
 fi
-
 rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
 ac_cv_cxx_compiler_gnu=$ac_compiler_gnu
 
 fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_cxx_compiler_gnu" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_cxx_compiler_gnu" >&5
 $as_echo "$ac_cv_cxx_compiler_gnu" >&6; }
 if test $ac_compiler_gnu = yes; then
   GXX=yes
@@ -4835,20 +4826,16 @@
 fi
 ac_test_CXXFLAGS=${CXXFLAGS+set}
 ac_save_CXXFLAGS=$CXXFLAGS
-{ $as_echo "$as_me:$LINENO: checking whether $CXX accepts -g" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CXX accepts -g" >&5
 $as_echo_n "checking whether $CXX accepts -g... " >&6; }
-if test "${ac_cv_prog_cxx_g+set}" = set; then
+if test "${ac_cv_prog_cxx_g+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
   ac_save_cxx_werror_flag=$ac_cxx_werror_flag
    ac_cxx_werror_flag=yes
    ac_cv_prog_cxx_g=no
    CXXFLAGS="-g"
-   cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+   cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 
 int
@@ -4859,35 +4846,11 @@
   return 0;
 }
 _ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_compile") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_cxx_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest.$ac_objext; then
+if ac_fn_cxx_try_compile "$LINENO"; then :
   ac_cv_prog_cxx_g=yes
 else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-	CXXFLAGS=""
-      cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+  CXXFLAGS=""
+      cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 
 int
@@ -4898,36 +4861,12 @@
   return 0;
 }
 _ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_compile") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_cxx_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest.$ac_objext; then
-  :
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
+if ac_fn_cxx_try_compile "$LINENO"; then :
 
-	ac_cxx_werror_flag=$ac_save_cxx_werror_flag
+else
+  ac_cxx_werror_flag=$ac_save_cxx_werror_flag
 	 CXXFLAGS="-g"
-	 cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+	 cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 
 int
@@ -4938,42 +4877,17 @@
   return 0;
 }
 _ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_compile") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_cxx_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest.$ac_objext; then
+if ac_fn_cxx_try_compile "$LINENO"; then :
   ac_cv_prog_cxx_g=yes
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-
 fi
-
 rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
 fi
-
 rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
 fi
-
 rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
    ac_cxx_werror_flag=$ac_save_cxx_werror_flag
 fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_prog_cxx_g" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cxx_g" >&5
 $as_echo "$ac_cv_prog_cxx_g" >&6; }
 if test "$ac_test_CXXFLAGS" = set; then
   CXXFLAGS=$ac_save_CXXFLAGS
@@ -4998,9 +4912,9 @@
 
 depcc="$CXX"  am_compiler_list=
 
-{ $as_echo "$as_me:$LINENO: checking dependency style of $depcc" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5
 $as_echo_n "checking dependency style of $depcc... " >&6; }
-if test "${am_cv_CXX_dependencies_compiler_type+set}" = set; then
+if test "${am_cv_CXX_dependencies_compiler_type+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
   if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
@@ -5026,6 +4940,11 @@
   if test "$am_compiler_list" = ""; then
      am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp`
   fi
+  am__universal=false
+  case " $depcc " in #(
+     *\ -arch\ *\ -arch\ *) am__universal=true ;;
+     esac
+
   for depmode in $am_compiler_list; do
     # Setup a source with many dependencies, because some compilers
     # like to wrap large dependency lists on column 80 (with \), and
@@ -5043,7 +4962,17 @@
     done
     echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
 
+    # We check with `-c' and `-o' for the sake of the "dashmstdout"
+    # mode.  It turns out that the SunPro C++ compiler does not properly
+    # handle `-M -o', and we need to detect this.  Also, some Intel
+    # versions had trouble with output in subdirs
+    am__obj=sub/conftest.${OBJEXT-o}
+    am__minus_obj="-o $am__obj"
     case $depmode in
+    gcc)
+      # This depmode causes a compiler race in universal mode.
+      test "$am__universal" = false || continue
+      ;;
     nosideeffect)
       # after this tag, mechanisms are not by side-effect, so they'll
       # only be used when explicitly requested
@@ -5053,19 +4982,23 @@
 	break
       fi
       ;;
+    msvisualcpp | msvcmsys)
+      # This compiler won't grok `-c -o', but also, the minuso test has
+      # not run yet.  These depmodes are late enough in the game, and
+      # so weak that their functioning should not be impacted.
+      am__obj=conftest.${OBJEXT-o}
+      am__minus_obj=
+      ;;
     none) break ;;
     esac
-    # We check with `-c' and `-o' for the sake of the "dashmstdout"
-    # mode.  It turns out that the SunPro C++ compiler does not properly
-    # handle `-M -o', and we need to detect this.
     if depmode=$depmode \
-       source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \
+       source=sub/conftest.c object=$am__obj \
        depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
-       $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \
+       $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \
          >/dev/null 2>conftest.err &&
        grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
        grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
-       grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 &&
+       grep $am__obj sub/conftest.Po > /dev/null 2>&1 &&
        ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
       # icc doesn't choke on unknown options, it will just issue warnings
       # or remarks (even with -Werror).  So we grep stderr for any message
@@ -5089,7 +5022,7 @@
 fi
 
 fi
-{ $as_echo "$as_me:$LINENO: result: $am_cv_CXX_dependencies_compiler_type" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_CXX_dependencies_compiler_type" >&5
 $as_echo "$am_cv_CXX_dependencies_compiler_type" >&6; }
 CXXDEPMODE=depmode=$am_cv_CXX_dependencies_compiler_type
 
@@ -5112,9 +5045,9 @@
 if test -n "$ac_tool_prefix"; then
   # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args.
 set dummy ${ac_tool_prefix}gcc; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 $as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_CC+set}" = set; then
+if test "${ac_cv_prog_CC+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
   if test -n "$CC"; then
@@ -5125,24 +5058,24 @@
 do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
   if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_CC="${ac_tool_prefix}gcc"
-    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
-done
+  done
 IFS=$as_save_IFS
 
 fi
 fi
 CC=$ac_cv_prog_CC
 if test -n "$CC"; then
-  { $as_echo "$as_me:$LINENO: result: $CC" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
 $as_echo "$CC" >&6; }
 else
-  { $as_echo "$as_me:$LINENO: result: no" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
 $as_echo "no" >&6; }
 fi
 
@@ -5152,9 +5085,9 @@
   ac_ct_CC=$CC
   # Extract the first word of "gcc", so it can be a program name with args.
 set dummy gcc; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 $as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
+if test "${ac_cv_prog_ac_ct_CC+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
   if test -n "$ac_ct_CC"; then
@@ -5165,24 +5098,24 @@
 do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
   if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_ac_ct_CC="gcc"
-    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
-done
+  done
 IFS=$as_save_IFS
 
 fi
 fi
 ac_ct_CC=$ac_cv_prog_ac_ct_CC
 if test -n "$ac_ct_CC"; then
-  { $as_echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5
 $as_echo "$ac_ct_CC" >&6; }
 else
-  { $as_echo "$as_me:$LINENO: result: no" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
 $as_echo "no" >&6; }
 fi
 
@@ -5191,7 +5124,7 @@
   else
     case $cross_compiling:$ac_tool_warned in
 yes:)
-{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
 ac_tool_warned=yes ;;
 esac
@@ -5205,9 +5138,9 @@
           if test -n "$ac_tool_prefix"; then
     # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args.
 set dummy ${ac_tool_prefix}cc; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 $as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_CC+set}" = set; then
+if test "${ac_cv_prog_CC+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
   if test -n "$CC"; then
@@ -5218,24 +5151,24 @@
 do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
   if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_CC="${ac_tool_prefix}cc"
-    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
-done
+  done
 IFS=$as_save_IFS
 
 fi
 fi
 CC=$ac_cv_prog_CC
 if test -n "$CC"; then
-  { $as_echo "$as_me:$LINENO: result: $CC" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
 $as_echo "$CC" >&6; }
 else
-  { $as_echo "$as_me:$LINENO: result: no" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
 $as_echo "no" >&6; }
 fi
 
@@ -5245,9 +5178,9 @@
 if test -z "$CC"; then
   # Extract the first word of "cc", so it can be a program name with args.
 set dummy cc; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 $as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_CC+set}" = set; then
+if test "${ac_cv_prog_CC+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
   if test -n "$CC"; then
@@ -5259,18 +5192,18 @@
 do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
   if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then
        ac_prog_rejected=yes
        continue
      fi
     ac_cv_prog_CC="cc"
-    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
-done
+  done
 IFS=$as_save_IFS
 
 if test $ac_prog_rejected = yes; then
@@ -5289,10 +5222,10 @@
 fi
 CC=$ac_cv_prog_CC
 if test -n "$CC"; then
-  { $as_echo "$as_me:$LINENO: result: $CC" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
 $as_echo "$CC" >&6; }
 else
-  { $as_echo "$as_me:$LINENO: result: no" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
 $as_echo "no" >&6; }
 fi
 
@@ -5304,9 +5237,9 @@
   do
     # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
 set dummy $ac_tool_prefix$ac_prog; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 $as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_CC+set}" = set; then
+if test "${ac_cv_prog_CC+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
   if test -n "$CC"; then
@@ -5317,24 +5250,24 @@
 do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
   if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_CC="$ac_tool_prefix$ac_prog"
-    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
-done
+  done
 IFS=$as_save_IFS
 
 fi
 fi
 CC=$ac_cv_prog_CC
 if test -n "$CC"; then
-  { $as_echo "$as_me:$LINENO: result: $CC" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
 $as_echo "$CC" >&6; }
 else
-  { $as_echo "$as_me:$LINENO: result: no" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
 $as_echo "no" >&6; }
 fi
 
@@ -5348,9 +5281,9 @@
 do
   # Extract the first word of "$ac_prog", so it can be a program name with args.
 set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 $as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
+if test "${ac_cv_prog_ac_ct_CC+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
   if test -n "$ac_ct_CC"; then
@@ -5361,24 +5294,24 @@
 do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
   if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_ac_ct_CC="$ac_prog"
-    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
-done
+  done
 IFS=$as_save_IFS
 
 fi
 fi
 ac_ct_CC=$ac_cv_prog_ac_ct_CC
 if test -n "$ac_ct_CC"; then
-  { $as_echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5
 $as_echo "$ac_ct_CC" >&6; }
 else
-  { $as_echo "$as_me:$LINENO: result: no" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
 $as_echo "no" >&6; }
 fi
 
@@ -5391,7 +5324,7 @@
   else
     case $cross_compiling:$ac_tool_warned in
 yes:)
-{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
 ac_tool_warned=yes ;;
 esac
@@ -5402,62 +5335,42 @@
 fi
 
 
-test -z "$CC" && { { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5
+test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-{ { $as_echo "$as_me:$LINENO: error: no acceptable C compiler found in \$PATH
-See \`config.log' for more details." >&5
-$as_echo "$as_me: error: no acceptable C compiler found in \$PATH
-See \`config.log' for more details." >&2;}
-   { (exit 1); exit 1; }; }; }
+as_fn_error "no acceptable C compiler found in \$PATH
+See \`config.log' for more details." "$LINENO" 5; }
 
 # Provide some information about the compiler.
-$as_echo "$as_me:$LINENO: checking for C compiler version" >&5
+$as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5
 set X $ac_compile
 ac_compiler=$2
-{ (ac_try="$ac_compiler --version >&5"
+for ac_option in --version -v -V -qversion; do
+  { { ac_try="$ac_compiler $ac_option >&5"
 case "(($ac_try" in
   *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
   *) ac_try_echo=$ac_try;;
 esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_compiler --version >&5") 2>&5
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_compiler $ac_option >&5") 2>conftest.err
   ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }
-{ (ac_try="$ac_compiler -v >&5"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_compiler -v >&5") 2>&5
-  ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }
-{ (ac_try="$ac_compiler -V >&5"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_compiler -V >&5") 2>&5
-  ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }
+  if test -s conftest.err; then
+    sed '10a\
+... rest of stderr output deleted ...
+         10q' conftest.err >conftest.er1
+    cat conftest.er1 >&5
+    rm -f conftest.er1 conftest.err
+  fi
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }
+done
 
-{ $as_echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C compiler" >&5
 $as_echo_n "checking whether we are using the GNU C compiler... " >&6; }
-if test "${ac_cv_c_compiler_gnu+set}" = set; then
+if test "${ac_cv_c_compiler_gnu+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 
 int
@@ -5471,37 +5384,16 @@
   return 0;
 }
 _ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_compile") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest.$ac_objext; then
+if ac_fn_c_try_compile "$LINENO"; then :
   ac_compiler_gnu=yes
 else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-	ac_compiler_gnu=no
+  ac_compiler_gnu=no
 fi
-
 rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
 ac_cv_c_compiler_gnu=$ac_compiler_gnu
 
 fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_compiler_gnu" >&5
 $as_echo "$ac_cv_c_compiler_gnu" >&6; }
 if test $ac_compiler_gnu = yes; then
   GCC=yes
@@ -5510,20 +5402,16 @@
 fi
 ac_test_CFLAGS=${CFLAGS+set}
 ac_save_CFLAGS=$CFLAGS
-{ $as_echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5
 $as_echo_n "checking whether $CC accepts -g... " >&6; }
-if test "${ac_cv_prog_cc_g+set}" = set; then
+if test "${ac_cv_prog_cc_g+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
   ac_save_c_werror_flag=$ac_c_werror_flag
    ac_c_werror_flag=yes
    ac_cv_prog_cc_g=no
    CFLAGS="-g"
-   cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+   cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 
 int
@@ -5534,35 +5422,11 @@
   return 0;
 }
 _ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_compile") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest.$ac_objext; then
+if ac_fn_c_try_compile "$LINENO"; then :
   ac_cv_prog_cc_g=yes
 else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-	CFLAGS=""
-      cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+  CFLAGS=""
+      cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 
 int
@@ -5573,36 +5437,12 @@
   return 0;
 }
 _ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_compile") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest.$ac_objext; then
-  :
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
+if ac_fn_c_try_compile "$LINENO"; then :
 
-	ac_c_werror_flag=$ac_save_c_werror_flag
+else
+  ac_c_werror_flag=$ac_save_c_werror_flag
 	 CFLAGS="-g"
-	 cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+	 cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 
 int
@@ -5613,42 +5453,17 @@
   return 0;
 }
 _ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_compile") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest.$ac_objext; then
+if ac_fn_c_try_compile "$LINENO"; then :
   ac_cv_prog_cc_g=yes
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-
 fi
-
 rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
 fi
-
 rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
 fi
-
 rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
    ac_c_werror_flag=$ac_save_c_werror_flag
 fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_g" >&5
 $as_echo "$ac_cv_prog_cc_g" >&6; }
 if test "$ac_test_CFLAGS" = set; then
   CFLAGS=$ac_save_CFLAGS
@@ -5665,18 +5480,14 @@
     CFLAGS=
   fi
 fi
-{ $as_echo "$as_me:$LINENO: checking for $CC option to accept ISO C89" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5
 $as_echo_n "checking for $CC option to accept ISO C89... " >&6; }
-if test "${ac_cv_prog_cc_c89+set}" = set; then
+if test "${ac_cv_prog_cc_c89+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
   ac_cv_prog_cc_c89=no
 ac_save_CC=$CC
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 #include <stdarg.h>
 #include <stdio.h>
@@ -5733,32 +5544,9 @@
 	-Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
 do
   CC="$ac_save_CC $ac_arg"
-  rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_compile") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest.$ac_objext; then
+  if ac_fn_c_try_compile "$LINENO"; then :
   ac_cv_prog_cc_c89=$ac_arg
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-
 fi
-
 rm -f core conftest.err conftest.$ac_objext
   test "x$ac_cv_prog_cc_c89" != "xno" && break
 done
@@ -5769,17 +5557,19 @@
 # AC_CACHE_VAL
 case "x$ac_cv_prog_cc_c89" in
   x)
-    { $as_echo "$as_me:$LINENO: result: none needed" >&5
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5
 $as_echo "none needed" >&6; } ;;
   xno)
-    { $as_echo "$as_me:$LINENO: result: unsupported" >&5
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5
 $as_echo "unsupported" >&6; } ;;
   *)
     CC="$CC $ac_cv_prog_cc_c89"
-    { $as_echo "$as_me:$LINENO: result: $ac_cv_prog_cc_c89" >&5
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5
 $as_echo "$ac_cv_prog_cc_c89" >&6; } ;;
 esac
+if test "x$ac_cv_prog_cc_c89" != xno; then :
 
+fi
 
 ac_ext=c
 ac_cpp='$CPP $CPPFLAGS'
@@ -5791,9 +5581,9 @@
 do
   # Extract the first word of "$ac_prog", so it can be a program name with args.
 set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 $as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_AWK+set}" = set; then
+if test "${ac_cv_prog_AWK+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
   if test -n "$AWK"; then
@@ -5804,24 +5594,24 @@
 do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
   if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_AWK="$ac_prog"
-    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
-done
+  done
 IFS=$as_save_IFS
 
 fi
 fi
 AWK=$ac_cv_prog_AWK
 if test -n "$AWK"; then
-  { $as_echo "$as_me:$LINENO: result: $AWK" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AWK" >&5
 $as_echo "$AWK" >&6; }
 else
-  { $as_echo "$as_me:$LINENO: result: no" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
 $as_echo "no" >&6; }
 fi
 
@@ -5829,105 +5619,13 @@
   test -n "$AWK" && break
 done
 
-# Find a good install program.  We prefer a C program (faster),
-# so one script is as good as another.  But avoid the broken or
-# incompatible versions:
-# SysV /etc/install, /usr/sbin/install
-# SunOS /usr/etc/install
-# IRIX /sbin/install
-# AIX /bin/install
-# AmigaOS /C/install, which installs bootblocks on floppy discs
-# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
-# AFS /usr/afsws/bin/install, which mishandles nonexistent args
-# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
-# OS/2's system install, which has a completely different semantic
-# ./install, which can be erroneously created by make from ./install.sh.
-# Reject install programs that cannot install multiple files.
-{ $as_echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5
-$as_echo_n "checking for a BSD-compatible install... " >&6; }
-if test -z "$INSTALL"; then
-if test "${ac_cv_path_install+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
-  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  # Account for people who put trailing slashes in PATH elements.
-case $as_dir/ in
-  ./ | .// | /cC/* | \
-  /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \
-  ?:\\/os2\\/install\\/* | ?:\\/OS2\\/INSTALL\\/* | \
-  /usr/ucb/* ) ;;
-  *)
-    # OSF1 and SCO ODT 3.0 have their own names for install.
-    # Don't use installbsd from OSF since it installs stuff as root
-    # by default.
-    for ac_prog in ginstall scoinst install; do
-      for ac_exec_ext in '' $ac_executable_extensions; do
-	if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; }; then
-	  if test $ac_prog = install &&
-	    grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
-	    # AIX install.  It has an incompatible calling convention.
-	    :
-	  elif test $ac_prog = install &&
-	    grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
-	    # program-specific install script used by HP pwplus--don't use.
-	    :
-	  else
-	    rm -rf conftest.one conftest.two conftest.dir
-	    echo one > conftest.one
-	    echo two > conftest.two
-	    mkdir conftest.dir
-	    if "$as_dir/$ac_prog$ac_exec_ext" -c conftest.one conftest.two "`pwd`/conftest.dir" &&
-	      test -s conftest.one && test -s conftest.two &&
-	      test -s conftest.dir/conftest.one &&
-	      test -s conftest.dir/conftest.two
-	    then
-	      ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c"
-	      break 3
-	    fi
-	  fi
-	fi
-      done
-    done
-    ;;
-esac
-
-done
-IFS=$as_save_IFS
-
-rm -rf conftest.one conftest.two conftest.dir
-
-fi
-  if test "${ac_cv_path_install+set}" = set; then
-    INSTALL=$ac_cv_path_install
-  else
-    # As a last resort, use the slow shell script.  Don't cache a
-    # value for INSTALL within a source directory, because that will
-    # break other packages using the cache if that directory is
-    # removed, or if the value is a relative name.
-    INSTALL=$ac_install_sh
-  fi
-fi
-{ $as_echo "$as_me:$LINENO: result: $INSTALL" >&5
-$as_echo "$INSTALL" >&6; }
-
-# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
-# It thinks the first close brace ends the variable substitution.
-test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
-
-test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}'
-
-test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
 
 if test -n "$ac_tool_prefix"; then
   # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
 set dummy ${ac_tool_prefix}ranlib; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 $as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_RANLIB+set}" = set; then
+if test "${ac_cv_prog_RANLIB+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
   if test -n "$RANLIB"; then
@@ -5938,24 +5636,24 @@
 do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
   if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
-    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
-done
+  done
 IFS=$as_save_IFS
 
 fi
 fi
 RANLIB=$ac_cv_prog_RANLIB
 if test -n "$RANLIB"; then
-  { $as_echo "$as_me:$LINENO: result: $RANLIB" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $RANLIB" >&5
 $as_echo "$RANLIB" >&6; }
 else
-  { $as_echo "$as_me:$LINENO: result: no" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
 $as_echo "no" >&6; }
 fi
 
@@ -5965,9 +5663,9 @@
   ac_ct_RANLIB=$RANLIB
   # Extract the first word of "ranlib", so it can be a program name with args.
 set dummy ranlib; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 $as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then
+if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
   if test -n "$ac_ct_RANLIB"; then
@@ -5978,24 +5676,24 @@
 do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
   if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_ac_ct_RANLIB="ranlib"
-    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
-done
+  done
 IFS=$as_save_IFS
 
 fi
 fi
 ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB
 if test -n "$ac_ct_RANLIB"; then
-  { $as_echo "$as_me:$LINENO: result: $ac_ct_RANLIB" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_RANLIB" >&5
 $as_echo "$ac_ct_RANLIB" >&6; }
 else
-  { $as_echo "$as_me:$LINENO: result: no" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
 $as_echo "no" >&6; }
 fi
 
@@ -6004,7 +5702,7 @@
   else
     case $cross_compiling:$ac_tool_warned in
 yes:)
-{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
 ac_tool_warned=yes ;;
 esac
@@ -6019,14 +5717,14 @@
 ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
 ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
 ac_compiler_gnu=$ac_cv_c_compiler_gnu
-{ $as_echo "$as_me:$LINENO: checking how to run the C preprocessor" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to run the C preprocessor" >&5
 $as_echo_n "checking how to run the C preprocessor... " >&6; }
 # On Suns, sometimes $CPP names a directory.
 if test -n "$CPP" && test -d "$CPP"; then
   CPP=
 fi
 if test -z "$CPP"; then
-  if test "${ac_cv_prog_CPP+set}" = set; then
+  if test "${ac_cv_prog_CPP+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
       # Double quotes because CPP needs to be expanded
@@ -6041,11 +5739,7 @@
   # <limits.h> exists even on freestanding compilers.
   # On the NeXT, cc -E runs the code through the compiler's parser,
   # not just through cpp. "Syntax error" is here to catch this case.
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 #ifdef __STDC__
 # include <limits.h>
@@ -6054,78 +5748,34 @@
 #endif
 		     Syntax error
 _ACEOF
-if { (ac_try="$ac_cpp conftest.$ac_ext"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } >/dev/null && {
-	 test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       }; then
-  :
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
+if ac_fn_c_try_cpp "$LINENO"; then :
 
+else
   # Broken: fails on valid input.
 continue
 fi
-
 rm -f conftest.err conftest.$ac_ext
 
   # OK, works on sane cases.  Now check whether nonexistent headers
   # can be detected and how.
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 #include <ac_nonexistent.h>
 _ACEOF
-if { (ac_try="$ac_cpp conftest.$ac_ext"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } >/dev/null && {
-	 test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       }; then
+if ac_fn_c_try_cpp "$LINENO"; then :
   # Broken: success on invalid input.
 continue
 else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
   # Passes both tests.
 ac_preproc_ok=:
 break
 fi
-
 rm -f conftest.err conftest.$ac_ext
 
 done
 # Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
 rm -f conftest.err conftest.$ac_ext
-if $ac_preproc_ok; then
+if $ac_preproc_ok; then :
   break
 fi
 
@@ -6137,7 +5787,7 @@
 else
   ac_cv_prog_CPP=$CPP
 fi
-{ $as_echo "$as_me:$LINENO: result: $CPP" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $CPP" >&5
 $as_echo "$CPP" >&6; }
 ac_preproc_ok=false
 for ac_c_preproc_warn_flag in '' yes
@@ -6148,11 +5798,7 @@
   # <limits.h> exists even on freestanding compilers.
   # On the NeXT, cc -E runs the code through the compiler's parser,
   # not just through cpp. "Syntax error" is here to catch this case.
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 #ifdef __STDC__
 # include <limits.h>
@@ -6161,87 +5807,40 @@
 #endif
 		     Syntax error
 _ACEOF
-if { (ac_try="$ac_cpp conftest.$ac_ext"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } >/dev/null && {
-	 test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       }; then
-  :
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
+if ac_fn_c_try_cpp "$LINENO"; then :
 
+else
   # Broken: fails on valid input.
 continue
 fi
-
 rm -f conftest.err conftest.$ac_ext
 
   # OK, works on sane cases.  Now check whether nonexistent headers
   # can be detected and how.
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 #include <ac_nonexistent.h>
 _ACEOF
-if { (ac_try="$ac_cpp conftest.$ac_ext"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } >/dev/null && {
-	 test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       }; then
+if ac_fn_c_try_cpp "$LINENO"; then :
   # Broken: success on invalid input.
 continue
 else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
   # Passes both tests.
 ac_preproc_ok=:
 break
 fi
-
 rm -f conftest.err conftest.$ac_ext
 
 done
 # Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
 rm -f conftest.err conftest.$ac_ext
-if $ac_preproc_ok; then
-  :
+if $ac_preproc_ok; then :
+
 else
-  { { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5
+  { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
 $as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-{ { $as_echo "$as_me:$LINENO: error: C preprocessor \"$CPP\" fails sanity check
-See \`config.log' for more details." >&5
-$as_echo "$as_me: error: C preprocessor \"$CPP\" fails sanity check
-See \`config.log' for more details." >&2;}
-   { (exit 1); exit 1; }; }; }
+as_fn_error "C preprocessor \"$CPP\" fails sanity check
+See \`config.log' for more details." "$LINENO" 5; }
 fi
 
 ac_ext=c
@@ -6250,2151 +5849,1360 @@
 ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
 ac_compiler_gnu=$ac_cv_c_compiler_gnu
 
-{ $as_echo "$as_me:$LINENO: checking for a thread-safe mkdir -p" >&5
-$as_echo_n "checking for a thread-safe mkdir -p... " >&6; }
-if test -z "$MKDIR_P"; then
-  if test "${ac_cv_path_mkdir+set}" = set; then
+
+enable_win32_dll=yes
+
+case $host in
+*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-cegcc*)
+  if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args.
+set dummy ${ac_tool_prefix}as; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_AS+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
-  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH$PATH_SEPARATOR/opt/sfw/bin
+  if test -n "$AS"; then
+  ac_cv_prog_AS="$AS" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
 do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
-  for ac_prog in mkdir gmkdir; do
-	 for ac_exec_ext in '' $ac_executable_extensions; do
-	   { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; } || continue
-	   case `"$as_dir/$ac_prog$ac_exec_ext" --version 2>&1` in #(
-	     'mkdir (GNU coreutils) '* | \
-	     'mkdir (coreutils) '* | \
-	     'mkdir (fileutils) '4.1*)
-	       ac_cv_path_mkdir=$as_dir/$ac_prog$ac_exec_ext
-	       break 3;;
-	   esac
-	 done
-       done
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_AS="${ac_tool_prefix}as"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
 done
+  done
 IFS=$as_save_IFS
 
 fi
-
-  if test "${ac_cv_path_mkdir+set}" = set; then
-    MKDIR_P="$ac_cv_path_mkdir -p"
-  else
-    # As a last resort, use the slow shell script.  Don't cache a
-    # value for MKDIR_P within a source directory, because that will
-    # break other packages using the cache if that directory is
-    # removed, or if the value is a relative name.
-    test -d ./--version && rmdir ./--version
-    MKDIR_P="$ac_install_sh -d"
-  fi
 fi
-{ $as_echo "$as_me:$LINENO: result: $MKDIR_P" >&5
-$as_echo "$MKDIR_P" >&6; }
+AS=$ac_cv_prog_AS
+if test -n "$AS"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AS" >&5
+$as_echo "$AS" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
 
 
+fi
+if test -z "$ac_cv_prog_AS"; then
+  ac_ct_AS=$AS
+  # Extract the first word of "as", so it can be a program name with args.
+set dummy as; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_ac_ct_AS+set}" = set; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_AS"; then
+  ac_cv_prog_ac_ct_AS="$ac_ct_AS" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_AS="as"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
 
-# Check whether --enable-shared was given.
-if test "${enable_shared+set}" = set; then
-  enableval=$enable_shared; p=${PACKAGE-default}
-    case $enableval in
-    yes) enable_shared=yes ;;
-    no) enable_shared=no ;;
-    *)
-      enable_shared=no
-      # Look at the argument we got.  We use all the common list separators.
-      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
-      for pkg in $enableval; do
-	IFS="$lt_save_ifs"
-	if test "X$pkg" = "X$p"; then
-	  enable_shared=yes
-	fi
-      done
-      IFS="$lt_save_ifs"
-      ;;
-    esac
+fi
+fi
+ac_ct_AS=$ac_cv_prog_ac_ct_AS
+if test -n "$ac_ct_AS"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_AS" >&5
+$as_echo "$ac_ct_AS" >&6; }
 else
-  enable_shared=yes
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
 fi
 
+  if test "x$ac_ct_AS" = x; then
+    AS="false"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    AS=$ac_ct_AS
+  fi
+else
+  AS="$ac_cv_prog_AS"
+fi
 
-# Check whether --enable-static was given.
-if test "${enable_static+set}" = set; then
-  enableval=$enable_static; p=${PACKAGE-default}
-    case $enableval in
-    yes) enable_static=yes ;;
-    no) enable_static=no ;;
-    *)
-     enable_static=no
-      # Look at the argument we got.  We use all the common list separators.
-      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
-      for pkg in $enableval; do
-	IFS="$lt_save_ifs"
-	if test "X$pkg" = "X$p"; then
-	  enable_static=yes
-	fi
-      done
-      IFS="$lt_save_ifs"
-      ;;
-    esac
+  if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}dlltool", so it can be a program name with args.
+set dummy ${ac_tool_prefix}dlltool; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_DLLTOOL+set}" = set; then :
+  $as_echo_n "(cached) " >&6
 else
-  enable_static=yes
-fi
-
+  if test -n "$DLLTOOL"; then
+  ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_DLLTOOL="${ac_tool_prefix}dlltool"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
 
-# Check whether --enable-fast-install was given.
-if test "${enable_fast_install+set}" = set; then
-  enableval=$enable_fast_install; p=${PACKAGE-default}
-    case $enableval in
-    yes) enable_fast_install=yes ;;
-    no) enable_fast_install=no ;;
-    *)
-      enable_fast_install=no
-      # Look at the argument we got.  We use all the common list separators.
-      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
-      for pkg in $enableval; do
-	IFS="$lt_save_ifs"
-	if test "X$pkg" = "X$p"; then
-	  enable_fast_install=yes
-	fi
-      done
-      IFS="$lt_save_ifs"
-      ;;
-    esac
+fi
+fi
+DLLTOOL=$ac_cv_prog_DLLTOOL
+if test -n "$DLLTOOL"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DLLTOOL" >&5
+$as_echo "$DLLTOOL" >&6; }
 else
-  enable_fast_install=yes
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
 fi
 
 
-{ $as_echo "$as_me:$LINENO: checking for a sed that does not truncate output" >&5
-$as_echo_n "checking for a sed that does not truncate output... " >&6; }
-if test "${lt_cv_path_SED+set}" = set; then
+fi
+if test -z "$ac_cv_prog_DLLTOOL"; then
+  ac_ct_DLLTOOL=$DLLTOOL
+  # Extract the first word of "dlltool", so it can be a program name with args.
+set dummy dlltool; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_ac_ct_DLLTOOL+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
-  # Loop through the user's path and test for sed and gsed.
-# Then use that list of sed's as ones to test for truncation.
+  if test -n "$ac_ct_DLLTOOL"; then
+  ac_cv_prog_ac_ct_DLLTOOL="$ac_ct_DLLTOOL" # Let the user override the test.
+else
 as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
 for as_dir in $PATH
 do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
-  for lt_ac_prog in sed gsed; do
     for ac_exec_ext in '' $ac_executable_extensions; do
-      if { test -f "$as_dir/$lt_ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$lt_ac_prog$ac_exec_ext"; }; then
-        lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext"
-      fi
-    done
-  done
-done
-IFS=$as_save_IFS
-lt_ac_max=0
-lt_ac_count=0
-# Add /usr/xpg4/bin/sed as it is typically found on Solaris
-# along with /bin/sed that truncates output.
-for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do
-  test ! -f $lt_ac_sed && continue
-  cat /dev/null > conftest.in
-  lt_ac_count=0
-  echo $ECHO_N "0123456789$ECHO_C" >conftest.in
-  # Check for GNU sed and select it if it is found.
-  if "$lt_ac_sed" --version 2>&1 < /dev/null | grep 'GNU' > /dev/null; then
-    lt_cv_path_SED=$lt_ac_sed
-    break
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_DLLTOOL="dlltool"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
   fi
-  while true; do
-    cat conftest.in conftest.in >conftest.tmp
-    mv conftest.tmp conftest.in
-    cp conftest.in conftest.nl
-    echo >>conftest.nl
-    $lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break
-    cmp -s conftest.out conftest.nl || break
-    # 10000 chars as input seems more than enough
-    test $lt_ac_count -gt 10 && break
-    lt_ac_count=`expr $lt_ac_count + 1`
-    if test $lt_ac_count -gt $lt_ac_max; then
-      lt_ac_max=$lt_ac_count
-      lt_cv_path_SED=$lt_ac_sed
-    fi
-  done
 done
+  done
+IFS=$as_save_IFS
 
 fi
-
-SED=$lt_cv_path_SED
-
-{ $as_echo "$as_me:$LINENO: result: $SED" >&5
-$as_echo "$SED" >&6; }
-
-
-# Check whether --with-gnu-ld was given.
-if test "${with_gnu_ld+set}" = set; then
-  withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes
+fi
+ac_ct_DLLTOOL=$ac_cv_prog_ac_ct_DLLTOOL
+if test -n "$ac_ct_DLLTOOL"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DLLTOOL" >&5
+$as_echo "$ac_ct_DLLTOOL" >&6; }
 else
-  with_gnu_ld=no
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
 fi
 
-ac_prog=ld
-if test "$GCC" = yes; then
-  # Check if gcc -print-prog-name=ld gives a path.
-  { $as_echo "$as_me:$LINENO: checking for ld used by $CC" >&5
-$as_echo_n "checking for ld used by $CC... " >&6; }
-  case $host in
-  *-*-mingw*)
-    # gcc leaves a trailing carriage return which upsets mingw
-    ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
-  *)
-    ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
-  esac
-  case $ac_prog in
-    # Accept absolute paths.
-    [\\/]* | ?:[\\/]*)
-      re_direlt='/[^/][^/]*/\.\./'
-      # Canonicalize the pathname of ld
-      ac_prog=`echo $ac_prog| $SED 's%\\\\%/%g'`
-      while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
-	ac_prog=`echo $ac_prog| $SED "s%$re_direlt%/%"`
-      done
-      test -z "$LD" && LD="$ac_prog"
-      ;;
-  "")
-    # If it fails, then pretend we aren't using GCC.
-    ac_prog=ld
-    ;;
-  *)
-    # If it is relative, then search for the first ld in PATH.
-    with_gnu_ld=unknown
-    ;;
-  esac
-elif test "$with_gnu_ld" = yes; then
-  { $as_echo "$as_me:$LINENO: checking for GNU ld" >&5
-$as_echo_n "checking for GNU ld... " >&6; }
+  if test "x$ac_ct_DLLTOOL" = x; then
+    DLLTOOL="false"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    DLLTOOL=$ac_ct_DLLTOOL
+  fi
 else
-  { $as_echo "$as_me:$LINENO: checking for non-GNU ld" >&5
-$as_echo_n "checking for non-GNU ld... " >&6; }
+  DLLTOOL="$ac_cv_prog_DLLTOOL"
 fi
-if test "${lt_cv_path_LD+set}" = set; then
+
+  if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}objdump", so it can be a program name with args.
+set dummy ${ac_tool_prefix}objdump; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_OBJDUMP+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
-  if test -z "$LD"; then
-  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-  for ac_dir in $PATH; do
-    IFS="$lt_save_ifs"
-    test -z "$ac_dir" && ac_dir=.
-    if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
-      lt_cv_path_LD="$ac_dir/$ac_prog"
-      # Check to see if the program is GNU ld.  I'd rather use --version,
-      # but apparently some variants of GNU ld only accept -v.
-      # Break only if it was the GNU/non-GNU ld that we prefer.
-      case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
-      *GNU* | *'with BFD'*)
-	test "$with_gnu_ld" != no && break
-	;;
-      *)
-	test "$with_gnu_ld" != yes && break
-	;;
-      esac
-    fi
-  done
-  IFS="$lt_save_ifs"
+  if test -n "$OBJDUMP"; then
+  ac_cv_prog_OBJDUMP="$OBJDUMP" # Let the user override the test.
 else
-  lt_cv_path_LD="$LD" # Let the user override the test with a path.
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_OBJDUMP="${ac_tool_prefix}objdump"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
+
 fi
 fi
-
-LD="$lt_cv_path_LD"
-if test -n "$LD"; then
-  { $as_echo "$as_me:$LINENO: result: $LD" >&5
-$as_echo "$LD" >&6; }
+OBJDUMP=$ac_cv_prog_OBJDUMP
+if test -n "$OBJDUMP"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OBJDUMP" >&5
+$as_echo "$OBJDUMP" >&6; }
 else
-  { $as_echo "$as_me:$LINENO: result: no" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
 $as_echo "no" >&6; }
 fi
-test -z "$LD" && { { $as_echo "$as_me:$LINENO: error: no acceptable ld found in \$PATH" >&5
-$as_echo "$as_me: error: no acceptable ld found in \$PATH" >&2;}
-   { (exit 1); exit 1; }; }
-{ $as_echo "$as_me:$LINENO: checking if the linker ($LD) is GNU ld" >&5
-$as_echo_n "checking if the linker ($LD) is GNU ld... " >&6; }
-if test "${lt_cv_prog_gnu_ld+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
-  # I'd rather use --version here, but apparently some GNU lds only accept -v.
-case `$LD -v 2>&1 </dev/null` in
-*GNU* | *'with BFD'*)
-  lt_cv_prog_gnu_ld=yes
-  ;;
-*)
-  lt_cv_prog_gnu_ld=no
-  ;;
-esac
-fi
-{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_gnu_ld" >&5
-$as_echo "$lt_cv_prog_gnu_ld" >&6; }
-with_gnu_ld=$lt_cv_prog_gnu_ld
 
 
-{ $as_echo "$as_me:$LINENO: checking for $LD option to reload object files" >&5
-$as_echo_n "checking for $LD option to reload object files... " >&6; }
-if test "${lt_cv_ld_reload_flag+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
-  lt_cv_ld_reload_flag='-r'
 fi
-{ $as_echo "$as_me:$LINENO: result: $lt_cv_ld_reload_flag" >&5
-$as_echo "$lt_cv_ld_reload_flag" >&6; }
-reload_flag=$lt_cv_ld_reload_flag
-case $reload_flag in
-"" | " "*) ;;
-*) reload_flag=" $reload_flag" ;;
-esac
-reload_cmds='$LD$reload_flag -o $output$reload_objs'
-case $host_os in
-  darwin*)
-    if test "$GCC" = yes; then
-      reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs'
-    else
-      reload_cmds='$LD$reload_flag -o $output$reload_objs'
-    fi
-    ;;
-esac
-
-{ $as_echo "$as_me:$LINENO: checking for BSD-compatible nm" >&5
-$as_echo_n "checking for BSD-compatible nm... " >&6; }
-if test "${lt_cv_path_NM+set}" = set; then
+if test -z "$ac_cv_prog_OBJDUMP"; then
+  ac_ct_OBJDUMP=$OBJDUMP
+  # Extract the first word of "objdump", so it can be a program name with args.
+set dummy objdump; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_ac_ct_OBJDUMP+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
-  if test -n "$NM"; then
-  # Let the user override the test.
-  lt_cv_path_NM="$NM"
+  if test -n "$ac_ct_OBJDUMP"; then
+  ac_cv_prog_ac_ct_OBJDUMP="$ac_ct_OBJDUMP" # Let the user override the test.
 else
-  lt_nm_to_check="${ac_tool_prefix}nm"
-  if test -n "$ac_tool_prefix" && test "$build" = "$host"; then
-    lt_nm_to_check="$lt_nm_to_check nm"
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_OBJDUMP="objdump"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
   fi
-  for lt_tmp_nm in $lt_nm_to_check; do
-    lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-    for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do
-      IFS="$lt_save_ifs"
-      test -z "$ac_dir" && ac_dir=.
-      tmp_nm="$ac_dir/$lt_tmp_nm"
-      if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then
-	# Check to see if the nm accepts a BSD-compat flag.
-	# Adding the `sed 1q' prevents false positives on HP-UX, which says:
-	#   nm: unknown option "B" ignored
-	# Tru64's nm complains that /dev/null is an invalid object file
-	case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in
-	*/dev/null* | *'Invalid file or object type'*)
-	  lt_cv_path_NM="$tmp_nm -B"
-	  break
-	  ;;
-	*)
-	  case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in
-	  */dev/null*)
-	    lt_cv_path_NM="$tmp_nm -p"
-	    break
-	    ;;
-	  *)
-	    lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
-	    continue # so that we can try to find one that supports BSD flags
-	    ;;
-	  esac
-	  ;;
-	esac
-      fi
-    done
-    IFS="$lt_save_ifs"
+done
   done
-  test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm
+IFS=$as_save_IFS
+
 fi
 fi
-{ $as_echo "$as_me:$LINENO: result: $lt_cv_path_NM" >&5
-$as_echo "$lt_cv_path_NM" >&6; }
-NM="$lt_cv_path_NM"
-
-{ $as_echo "$as_me:$LINENO: checking whether ln -s works" >&5
-$as_echo_n "checking whether ln -s works... " >&6; }
-LN_S=$as_ln_s
-if test "$LN_S" = "ln -s"; then
-  { $as_echo "$as_me:$LINENO: result: yes" >&5
-$as_echo "yes" >&6; }
+ac_ct_OBJDUMP=$ac_cv_prog_ac_ct_OBJDUMP
+if test -n "$ac_ct_OBJDUMP"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OBJDUMP" >&5
+$as_echo "$ac_ct_OBJDUMP" >&6; }
 else
-  { $as_echo "$as_me:$LINENO: result: no, using $LN_S" >&5
-$as_echo "no, using $LN_S" >&6; }
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
 fi
 
-{ $as_echo "$as_me:$LINENO: checking how to recognize dependent libraries" >&5
-$as_echo_n "checking how to recognize dependent libraries... " >&6; }
-if test "${lt_cv_deplibs_check_method+set}" = set; then
-  $as_echo_n "(cached) " >&6
+  if test "x$ac_ct_OBJDUMP" = x; then
+    OBJDUMP="false"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    OBJDUMP=$ac_ct_OBJDUMP
+  fi
 else
-  lt_cv_file_magic_cmd='$MAGIC_CMD'
-lt_cv_file_magic_test_file=
-lt_cv_deplibs_check_method='unknown'
-# Need to set the preceding variable on all platforms that support
-# interlibrary dependencies.
-# 'none' -- dependencies not supported.
-# `unknown' -- same as none, but documents that we really don't know.
-# 'pass_all' -- all dependencies passed with no checks.
-# 'test_compile' -- check by making test program.
-# 'file_magic [[regex]]' -- check by looking for files in library path
-# which responds to the $file_magic_cmd with a given extended regex.
-# If you have `file' or equivalent on your system and you're not sure
-# whether `pass_all' will *always* work, you probably want this one.
+  OBJDUMP="$ac_cv_prog_OBJDUMP"
+fi
 
-case $host_os in
-aix[4-9]*)
-  lt_cv_deplibs_check_method=pass_all
   ;;
+esac
 
-beos*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
+test -z "$AS" && AS=as
 
-bsdi[45]*)
-  lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)'
-  lt_cv_file_magic_cmd='/usr/bin/file -L'
-  lt_cv_file_magic_test_file=/shlib/libc.so
-  ;;
 
-cygwin*)
-  # func_win32_libid is a shell function defined in ltmain.sh
-  lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
-  lt_cv_file_magic_cmd='func_win32_libid'
-  ;;
 
-mingw* | pw32*)
-  # Base MSYS/MinGW do not provide the 'file' command needed by
-  # func_win32_libid shell function, so use a weaker test based on 'objdump',
-  # unless we find 'file', for example because we are cross-compiling.
-  if ( file / ) >/dev/null 2>&1; then
-    lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
-    lt_cv_file_magic_cmd='func_win32_libid'
-  else
-    lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
-    lt_cv_file_magic_cmd='$OBJDUMP -f'
-  fi
-  ;;
 
-darwin* | rhapsody*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
 
-freebsd* | dragonfly*)
-  if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
-    case $host_cpu in
-    i*86 )
-      # Not sure whether the presence of OpenBSD here was a mistake.
-      # Let's accept both of them until this is cleared up.
-      lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[3-9]86 (compact )?demand paged shared library'
-      lt_cv_file_magic_cmd=/usr/bin/file
-      lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
-      ;;
-    esac
-  else
-    lt_cv_deplibs_check_method=pass_all
-  fi
-  ;;
+test -z "$DLLTOOL" && DLLTOOL=dlltool
 
-gnu*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
 
-hpux10.20* | hpux11*)
-  lt_cv_file_magic_cmd=/usr/bin/file
-  case $host_cpu in
-  ia64*)
-    lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - IA64'
-    lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
-    ;;
-  hppa*64*)
-    lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - PA-RISC [0-9].[0-9]'
-    lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl
-    ;;
-  *)
-    lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9].[0-9]) shared library'
-    lt_cv_file_magic_test_file=/usr/lib/libc.sl
-    ;;
-  esac
-  ;;
 
-interix[3-9]*)
-  # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here
-  lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|\.a)$'
-  ;;
 
-irix5* | irix6* | nonstopux*)
-  case $LD in
-  *-32|*"-32 ") libmagic=32-bit;;
-  *-n32|*"-n32 ") libmagic=N32;;
-  *-64|*"-64 ") libmagic=64-bit;;
-  *) libmagic=never-match;;
-  esac
-  lt_cv_deplibs_check_method=pass_all
-  ;;
 
-# This must be Linux ELF.
-linux* | k*bsd*-gnu)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
+test -z "$OBJDUMP" && OBJDUMP=objdump
 
-netbsd*)
-  if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
-    lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$'
-  else
-    lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|_pic\.a)$'
-  fi
-  ;;
 
-newos6*)
-  lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)'
-  lt_cv_file_magic_cmd=/usr/bin/file
-  lt_cv_file_magic_test_file=/usr/lib/libnls.so
-  ;;
 
-nto-qnx*)
-  lt_cv_deplibs_check_method=unknown
-  ;;
 
-openbsd*)
-  if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-    lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|\.so|_pic\.a)$'
-  else
-    lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$'
-  fi
-  ;;
 
-osf3* | osf4* | osf5*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
 
-rdos*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
 
-solaris*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
+case `pwd` in
+  *\ * | *\	*)
+    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&5
+$as_echo "$as_me: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&2;} ;;
+esac
 
-sysv4 | sysv4.3*)
-  case $host_vendor in
-  motorola)
-    lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]'
-    lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
-    ;;
-  ncr)
-    lt_cv_deplibs_check_method=pass_all
-    ;;
-  sequent)
-    lt_cv_file_magic_cmd='/bin/file'
-    lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )'
-    ;;
-  sni)
-    lt_cv_file_magic_cmd='/bin/file'
-    lt_cv_deplibs_check_method="file_magic ELF [0-9][0-9]*-bit [LM]SB dynamic lib"
-    lt_cv_file_magic_test_file=/lib/libc.so
-    ;;
-  siemens)
-    lt_cv_deplibs_check_method=pass_all
-    ;;
-  pc)
-    lt_cv_deplibs_check_method=pass_all
-    ;;
-  esac
-  ;;
 
-sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-esac
 
-fi
-{ $as_echo "$as_me:$LINENO: result: $lt_cv_deplibs_check_method" >&5
-$as_echo "$lt_cv_deplibs_check_method" >&6; }
-file_magic_cmd=$lt_cv_file_magic_cmd
-deplibs_check_method=$lt_cv_deplibs_check_method
-test -z "$deplibs_check_method" && deplibs_check_method=unknown
+macro_version='2.2.6'
+macro_revision='1.3012'
 
 
 
 
-# If no C compiler was specified, use CC.
-LTCC=${LTCC-"$CC"}
 
-# If no C compiler flags were specified, use CFLAGS.
-LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
 
-# Allow CC to be a program name with arguments.
-compiler=$CC
 
-# Check whether --enable-libtool-lock was given.
-if test "${enable_libtool_lock+set}" = set; then
-  enableval=$enable_libtool_lock;
-fi
 
-test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
 
-# Some flags need to be propagated to the compiler or linker for good
-# libtool support.
-case $host in
-ia64-*-hpux*)
-  # Find out which ABI we are using.
-  echo 'int i;' > conftest.$ac_ext
-  if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; then
-    case `/usr/bin/file conftest.$ac_objext` in
-    *ELF-32*)
-      HPUX_IA64_MODE="32"
-      ;;
-    *ELF-64*)
-      HPUX_IA64_MODE="64"
-      ;;
-    esac
-  fi
-  rm -rf conftest*
-  ;;
-*-*-irix6*)
-  # Find out which ABI we are using.
-  echo '#line 6859 "configure"' > conftest.$ac_ext
-  if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; then
-   if test "$lt_cv_prog_gnu_ld" = yes; then
-    case `/usr/bin/file conftest.$ac_objext` in
-    *32-bit*)
-      LD="${LD-ld} -melf32bsmip"
-      ;;
-    *N32*)
-      LD="${LD-ld} -melf32bmipn32"
-      ;;
-    *64-bit*)
-      LD="${LD-ld} -melf64bmip"
-      ;;
-    esac
-   else
-    case `/usr/bin/file conftest.$ac_objext` in
-    *32-bit*)
-      LD="${LD-ld} -32"
-      ;;
-    *N32*)
-      LD="${LD-ld} -n32"
-      ;;
-    *64-bit*)
-      LD="${LD-ld} -64"
-      ;;
-    esac
-   fi
-  fi
-  rm -rf conftest*
-  ;;
-
-x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \
-s390*-*linux*|sparc*-*linux*)
-  # Find out which ABI we are using.
-  echo 'int i;' > conftest.$ac_ext
-  if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; then
-    case `/usr/bin/file conftest.o` in
-    *32-bit*)
-      case $host in
-        x86_64-*kfreebsd*-gnu)
-          LD="${LD-ld} -m elf_i386_fbsd"
-          ;;
-        x86_64-*linux*)
-          LD="${LD-ld} -m elf_i386"
-          ;;
-        ppc64-*linux*|powerpc64-*linux*)
-          LD="${LD-ld} -m elf32ppclinux"
-          ;;
-        s390x-*linux*)
-          LD="${LD-ld} -m elf_s390"
-          ;;
-        sparc64-*linux*)
-          LD="${LD-ld} -m elf32_sparc"
-          ;;
-      esac
-      ;;
-    *64-bit*)
-      case $host in
-        x86_64-*kfreebsd*-gnu)
-          LD="${LD-ld} -m elf_x86_64_fbsd"
-          ;;
-        x86_64-*linux*)
-          LD="${LD-ld} -m elf_x86_64"
-          ;;
-        ppc*-*linux*|powerpc*-*linux*)
-          LD="${LD-ld} -m elf64ppc"
-          ;;
-        s390*-*linux*)
-          LD="${LD-ld} -m elf64_s390"
-          ;;
-        sparc*-*linux*)
-          LD="${LD-ld} -m elf64_sparc"
-          ;;
-      esac
-      ;;
-    esac
-  fi
-  rm -rf conftest*
-  ;;
-
-*-*-sco3.2v5*)
-  # On SCO OpenServer 5, we need -belf to get full-featured binaries.
-  SAVE_CFLAGS="$CFLAGS"
-  CFLAGS="$CFLAGS -belf"
-  { $as_echo "$as_me:$LINENO: checking whether the C compiler needs -belf" >&5
-$as_echo_n "checking whether the C compiler needs -belf... " >&6; }
-if test "${lt_cv_cc_needs_belf+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
-  ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-     cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-
-int
-main ()
-{
 
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_link") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest$ac_exeext && {
-	 test "$cross_compiling" = yes ||
-	 $as_test_x conftest$ac_exeext
-       }; then
-  lt_cv_cc_needs_belf=yes
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
 
-	lt_cv_cc_needs_belf=no
-fi
 
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-      conftest$ac_exeext conftest.$ac_ext
-     ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
 
-fi
-{ $as_echo "$as_me:$LINENO: result: $lt_cv_cc_needs_belf" >&5
-$as_echo "$lt_cv_cc_needs_belf" >&6; }
-  if test x"$lt_cv_cc_needs_belf" != x"yes"; then
-    # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
-    CFLAGS="$SAVE_CFLAGS"
-  fi
-  ;;
-sparc*-*solaris*)
-  # Find out which ABI we are using.
-  echo 'int i;' > conftest.$ac_ext
-  if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; then
-    case `/usr/bin/file conftest.o` in
-    *64-bit*)
-      case $lt_cv_prog_gnu_ld in
-      yes*) LD="${LD-ld} -m elf64_sparc" ;;
-      *)
-        if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then
-	  LD="${LD-ld} -64"
-	fi
-	;;
-      esac
-      ;;
-    esac
-  fi
-  rm -rf conftest*
-  ;;
+ltmain="$ac_aux_dir/ltmain.sh"
 
-*-*-cygwin* | *-*-mingw* | *-*-pw32*)
-  if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "${ac_tool_prefix}dlltool", so it can be a program name with args.
-set dummy ${ac_tool_prefix}dlltool; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_DLLTOOL+set}" = set; then
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a sed that does not truncate output" >&5
+$as_echo_n "checking for a sed that does not truncate output... " >&6; }
+if test "${ac_cv_path_SED+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
-  if test -n "$DLLTOOL"; then
-  ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+            ac_script=s/aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa/bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb/
+     for ac_i in 1 2 3 4 5 6 7; do
+       ac_script="$ac_script$as_nl$ac_script"
+     done
+     echo "$ac_script" 2>/dev/null | sed 99q >conftest.sed
+     { ac_script=; unset ac_script;}
+     if test -z "$SED"; then
+  ac_path_SED_found=false
+  # Loop through the user's path and test for each of PROGNAME-LIST
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
 for as_dir in $PATH
 do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-    ac_cv_prog_DLLTOOL="${ac_tool_prefix}dlltool"
-    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-IFS=$as_save_IFS
+    for ac_prog in sed gsed; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
+      ac_path_SED="$as_dir/$ac_prog$ac_exec_ext"
+      { test -f "$ac_path_SED" && $as_test_x "$ac_path_SED"; } || continue
+# Check for GNU ac_path_SED and select it if it is found.
+  # Check for GNU $ac_path_SED
+case `"$ac_path_SED" --version 2>&1` in
+*GNU*)
+  ac_cv_path_SED="$ac_path_SED" ac_path_SED_found=:;;
+*)
+  ac_count=0
+  $as_echo_n 0123456789 >"conftest.in"
+  while :
+  do
+    cat "conftest.in" "conftest.in" >"conftest.tmp"
+    mv "conftest.tmp" "conftest.in"
+    cp "conftest.in" "conftest.nl"
+    $as_echo '' >> "conftest.nl"
+    "$ac_path_SED" -f conftest.sed < "conftest.nl" >"conftest.out" 2>/dev/null || break
+    diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
+    as_fn_arith $ac_count + 1 && ac_count=$as_val
+    if test $ac_count -gt ${ac_path_SED_max-0}; then
+      # Best one so far, save it but keep looking for a better one
+      ac_cv_path_SED="$ac_path_SED"
+      ac_path_SED_max=$ac_count
+    fi
+    # 10*(2^10) chars as input seems more than enough
+    test $ac_count -gt 10 && break
+  done
+  rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
+esac
 
-fi
-fi
-DLLTOOL=$ac_cv_prog_DLLTOOL
-if test -n "$DLLTOOL"; then
-  { $as_echo "$as_me:$LINENO: result: $DLLTOOL" >&5
-$as_echo "$DLLTOOL" >&6; }
+      $ac_path_SED_found && break 3
+    done
+  done
+  done
+IFS=$as_save_IFS
+  if test -z "$ac_cv_path_SED"; then
+    as_fn_error "no acceptable sed could be found in \$PATH" "$LINENO" 5
+  fi
 else
-  { $as_echo "$as_me:$LINENO: result: no" >&5
-$as_echo "no" >&6; }
+  ac_cv_path_SED=$SED
 fi
 
-
 fi
-if test -z "$ac_cv_prog_DLLTOOL"; then
-  ac_ct_DLLTOOL=$DLLTOOL
-  # Extract the first word of "dlltool", so it can be a program name with args.
-set dummy dlltool; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_ac_ct_DLLTOOL+set}" = set; then
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_SED" >&5
+$as_echo "$ac_cv_path_SED" >&6; }
+ SED="$ac_cv_path_SED"
+  rm -f conftest.sed
+
+test -z "$SED" && SED=sed
+Xsed="$SED -e 1s/^X//"
+
+
+
+
+
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for fgrep" >&5
+$as_echo_n "checking for fgrep... " >&6; }
+if test "${ac_cv_path_FGREP+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
-  if test -n "$ac_ct_DLLTOOL"; then
-  ac_cv_prog_ac_ct_DLLTOOL="$ac_ct_DLLTOOL" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
+  if echo 'ab*c' | $GREP -F 'ab*c' >/dev/null 2>&1
+   then ac_cv_path_FGREP="$GREP -F"
+   else
+     if test -z "$FGREP"; then
+  ac_path_FGREP_found=false
+  # Loop through the user's path and test for each of PROGNAME-LIST
+  as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
 do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-    ac_cv_prog_ac_ct_DLLTOOL="dlltool"
-    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-IFS=$as_save_IFS
+    for ac_prog in fgrep; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
+      ac_path_FGREP="$as_dir/$ac_prog$ac_exec_ext"
+      { test -f "$ac_path_FGREP" && $as_test_x "$ac_path_FGREP"; } || continue
+# Check for GNU ac_path_FGREP and select it if it is found.
+  # Check for GNU $ac_path_FGREP
+case `"$ac_path_FGREP" --version 2>&1` in
+*GNU*)
+  ac_cv_path_FGREP="$ac_path_FGREP" ac_path_FGREP_found=:;;
+*)
+  ac_count=0
+  $as_echo_n 0123456789 >"conftest.in"
+  while :
+  do
+    cat "conftest.in" "conftest.in" >"conftest.tmp"
+    mv "conftest.tmp" "conftest.in"
+    cp "conftest.in" "conftest.nl"
+    $as_echo 'FGREP' >> "conftest.nl"
+    "$ac_path_FGREP" FGREP < "conftest.nl" >"conftest.out" 2>/dev/null || break
+    diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
+    as_fn_arith $ac_count + 1 && ac_count=$as_val
+    if test $ac_count -gt ${ac_path_FGREP_max-0}; then
+      # Best one so far, save it but keep looking for a better one
+      ac_cv_path_FGREP="$ac_path_FGREP"
+      ac_path_FGREP_max=$ac_count
+    fi
+    # 10*(2^10) chars as input seems more than enough
+    test $ac_count -gt 10 && break
+  done
+  rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
+esac
 
-fi
-fi
-ac_ct_DLLTOOL=$ac_cv_prog_ac_ct_DLLTOOL
-if test -n "$ac_ct_DLLTOOL"; then
-  { $as_echo "$as_me:$LINENO: result: $ac_ct_DLLTOOL" >&5
-$as_echo "$ac_ct_DLLTOOL" >&6; }
+      $ac_path_FGREP_found && break 3
+    done
+  done
+  done
+IFS=$as_save_IFS
+  if test -z "$ac_cv_path_FGREP"; then
+    as_fn_error "no acceptable fgrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
+  fi
 else
-  { $as_echo "$as_me:$LINENO: result: no" >&5
-$as_echo "no" >&6; }
+  ac_cv_path_FGREP=$FGREP
 fi
 
-  if test "x$ac_ct_DLLTOOL" = x; then
-    DLLTOOL="false"
-  else
-    case $cross_compiling:$ac_tool_warned in
-yes:)
-{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5
-$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
-ac_tool_warned=yes ;;
-esac
-    DLLTOOL=$ac_ct_DLLTOOL
-  fi
-else
-  DLLTOOL="$ac_cv_prog_DLLTOOL"
+   fi
 fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_FGREP" >&5
+$as_echo "$ac_cv_path_FGREP" >&6; }
+ FGREP="$ac_cv_path_FGREP"
 
-  if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args.
-set dummy ${ac_tool_prefix}as; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_AS+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$AS"; then
-  ac_cv_prog_AS="$AS" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-    ac_cv_prog_AS="${ac_tool_prefix}as"
-    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-IFS=$as_save_IFS
 
-fi
-fi
-AS=$ac_cv_prog_AS
-if test -n "$AS"; then
-  { $as_echo "$as_me:$LINENO: result: $AS" >&5
-$as_echo "$AS" >&6; }
-else
-  { $as_echo "$as_me:$LINENO: result: no" >&5
-$as_echo "no" >&6; }
-fi
+test -z "$GREP" && GREP=grep
 
 
-fi
-if test -z "$ac_cv_prog_AS"; then
-  ac_ct_AS=$AS
-  # Extract the first word of "as", so it can be a program name with args.
-set dummy as; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_ac_ct_AS+set}" = set; then
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+# Check whether --with-gnu-ld was given.
+if test "${with_gnu_ld+set}" = set; then :
+  withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes
+else
+  with_gnu_ld=no
+fi
+
+ac_prog=ld
+if test "$GCC" = yes; then
+  # Check if gcc -print-prog-name=ld gives a path.
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ld used by $CC" >&5
+$as_echo_n "checking for ld used by $CC... " >&6; }
+  case $host in
+  *-*-mingw*)
+    # gcc leaves a trailing carriage return which upsets mingw
+    ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
+  *)
+    ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
+  esac
+  case $ac_prog in
+    # Accept absolute paths.
+    [\\/]* | ?:[\\/]*)
+      re_direlt='/[^/][^/]*/\.\./'
+      # Canonicalize the pathname of ld
+      ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'`
+      while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do
+	ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"`
+      done
+      test -z "$LD" && LD="$ac_prog"
+      ;;
+  "")
+    # If it fails, then pretend we aren't using GCC.
+    ac_prog=ld
+    ;;
+  *)
+    # If it is relative, then search for the first ld in PATH.
+    with_gnu_ld=unknown
+    ;;
+  esac
+elif test "$with_gnu_ld" = yes; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU ld" >&5
+$as_echo_n "checking for GNU ld... " >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for non-GNU ld" >&5
+$as_echo_n "checking for non-GNU ld... " >&6; }
+fi
+if test "${lt_cv_path_LD+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
-  if test -n "$ac_ct_AS"; then
-  ac_cv_prog_ac_ct_AS="$ac_ct_AS" # Let the user override the test.
+  if test -z "$LD"; then
+  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+  for ac_dir in $PATH; do
+    IFS="$lt_save_ifs"
+    test -z "$ac_dir" && ac_dir=.
+    if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
+      lt_cv_path_LD="$ac_dir/$ac_prog"
+      # Check to see if the program is GNU ld.  I'd rather use --version,
+      # but apparently some variants of GNU ld only accept -v.
+      # Break only if it was the GNU/non-GNU ld that we prefer.
+      case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
+      *GNU* | *'with BFD'*)
+	test "$with_gnu_ld" != no && break
+	;;
+      *)
+	test "$with_gnu_ld" != yes && break
+	;;
+      esac
+    fi
+  done
+  IFS="$lt_save_ifs"
 else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-    ac_cv_prog_ac_ct_AS="as"
-    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-IFS=$as_save_IFS
-
+  lt_cv_path_LD="$LD" # Let the user override the test with a path.
 fi
 fi
-ac_ct_AS=$ac_cv_prog_ac_ct_AS
-if test -n "$ac_ct_AS"; then
-  { $as_echo "$as_me:$LINENO: result: $ac_ct_AS" >&5
-$as_echo "$ac_ct_AS" >&6; }
+
+LD="$lt_cv_path_LD"
+if test -n "$LD"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LD" >&5
+$as_echo "$LD" >&6; }
 else
-  { $as_echo "$as_me:$LINENO: result: no" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
 $as_echo "no" >&6; }
 fi
-
-  if test "x$ac_ct_AS" = x; then
-    AS="false"
-  else
-    case $cross_compiling:$ac_tool_warned in
-yes:)
-{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5
-$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
-ac_tool_warned=yes ;;
-esac
-    AS=$ac_ct_AS
-  fi
+test -z "$LD" && as_fn_error "no acceptable ld found in \$PATH" "$LINENO" 5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if the linker ($LD) is GNU ld" >&5
+$as_echo_n "checking if the linker ($LD) is GNU ld... " >&6; }
+if test "${lt_cv_prog_gnu_ld+set}" = set; then :
+  $as_echo_n "(cached) " >&6
 else
-  AS="$ac_cv_prog_AS"
+  # I'd rather use --version here, but apparently some GNU lds only accept -v.
+case `$LD -v 2>&1 </dev/null` in
+*GNU* | *'with BFD'*)
+  lt_cv_prog_gnu_ld=yes
+  ;;
+*)
+  lt_cv_prog_gnu_ld=no
+  ;;
+esac
 fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_gnu_ld" >&5
+$as_echo "$lt_cv_prog_gnu_ld" >&6; }
+with_gnu_ld=$lt_cv_prog_gnu_ld
+
+
+
 
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for BSD- or MS-compatible name lister (nm)" >&5
+$as_echo_n "checking for BSD- or MS-compatible name lister (nm)... " >&6; }
+if test "${lt_cv_path_NM+set}" = set; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$NM"; then
+  # Let the user override the test.
+  lt_cv_path_NM="$NM"
+else
+  lt_nm_to_check="${ac_tool_prefix}nm"
+  if test -n "$ac_tool_prefix" && test "$build" = "$host"; then
+    lt_nm_to_check="$lt_nm_to_check nm"
+  fi
+  for lt_tmp_nm in $lt_nm_to_check; do
+    lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+    for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do
+      IFS="$lt_save_ifs"
+      test -z "$ac_dir" && ac_dir=.
+      tmp_nm="$ac_dir/$lt_tmp_nm"
+      if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then
+	# Check to see if the nm accepts a BSD-compat flag.
+	# Adding the `sed 1q' prevents false positives on HP-UX, which says:
+	#   nm: unknown option "B" ignored
+	# Tru64's nm complains that /dev/null is an invalid object file
+	case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in
+	*/dev/null* | *'Invalid file or object type'*)
+	  lt_cv_path_NM="$tmp_nm -B"
+	  break
+	  ;;
+	*)
+	  case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in
+	  */dev/null*)
+	    lt_cv_path_NM="$tmp_nm -p"
+	    break
+	    ;;
+	  *)
+	    lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
+	    continue # so that we can try to find one that supports BSD flags
+	    ;;
+	  esac
+	  ;;
+	esac
+      fi
+    done
+    IFS="$lt_save_ifs"
+  done
+  : ${lt_cv_path_NM=no}
+fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_NM" >&5
+$as_echo "$lt_cv_path_NM" >&6; }
+if test "$lt_cv_path_NM" != "no"; then
+  NM="$lt_cv_path_NM"
+else
+  # Didn't find any BSD compatible name lister, look for dumpbin.
   if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "${ac_tool_prefix}objdump", so it can be a program name with args.
-set dummy ${ac_tool_prefix}objdump; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+  for ac_prog in "dumpbin -symbols" "link -dump -symbols"
+  do
+    # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 $as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_OBJDUMP+set}" = set; then
+if test "${ac_cv_prog_DUMPBIN+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
-  if test -n "$OBJDUMP"; then
-  ac_cv_prog_OBJDUMP="$OBJDUMP" # Let the user override the test.
+  if test -n "$DUMPBIN"; then
+  ac_cv_prog_DUMPBIN="$DUMPBIN" # Let the user override the test.
 else
 as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
 for as_dir in $PATH
 do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
   if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-    ac_cv_prog_OBJDUMP="${ac_tool_prefix}objdump"
-    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    ac_cv_prog_DUMPBIN="$ac_tool_prefix$ac_prog"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
-done
+  done
 IFS=$as_save_IFS
 
 fi
 fi
-OBJDUMP=$ac_cv_prog_OBJDUMP
-if test -n "$OBJDUMP"; then
-  { $as_echo "$as_me:$LINENO: result: $OBJDUMP" >&5
-$as_echo "$OBJDUMP" >&6; }
+DUMPBIN=$ac_cv_prog_DUMPBIN
+if test -n "$DUMPBIN"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DUMPBIN" >&5
+$as_echo "$DUMPBIN" >&6; }
 else
-  { $as_echo "$as_me:$LINENO: result: no" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
 $as_echo "no" >&6; }
 fi
 
 
+    test -n "$DUMPBIN" && break
+  done
 fi
-if test -z "$ac_cv_prog_OBJDUMP"; then
-  ac_ct_OBJDUMP=$OBJDUMP
-  # Extract the first word of "objdump", so it can be a program name with args.
-set dummy objdump; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+if test -z "$DUMPBIN"; then
+  ac_ct_DUMPBIN=$DUMPBIN
+  for ac_prog in "dumpbin -symbols" "link -dump -symbols"
+do
+  # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 $as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_ac_ct_OBJDUMP+set}" = set; then
+if test "${ac_cv_prog_ac_ct_DUMPBIN+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
-  if test -n "$ac_ct_OBJDUMP"; then
-  ac_cv_prog_ac_ct_OBJDUMP="$ac_ct_OBJDUMP" # Let the user override the test.
+  if test -n "$ac_ct_DUMPBIN"; then
+  ac_cv_prog_ac_ct_DUMPBIN="$ac_ct_DUMPBIN" # Let the user override the test.
 else
 as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
 for as_dir in $PATH
 do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
   if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-    ac_cv_prog_ac_ct_OBJDUMP="objdump"
-    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    ac_cv_prog_ac_ct_DUMPBIN="$ac_prog"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
-done
+  done
 IFS=$as_save_IFS
 
 fi
 fi
-ac_ct_OBJDUMP=$ac_cv_prog_ac_ct_OBJDUMP
-if test -n "$ac_ct_OBJDUMP"; then
-  { $as_echo "$as_me:$LINENO: result: $ac_ct_OBJDUMP" >&5
-$as_echo "$ac_ct_OBJDUMP" >&6; }
+ac_ct_DUMPBIN=$ac_cv_prog_ac_ct_DUMPBIN
+if test -n "$ac_ct_DUMPBIN"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DUMPBIN" >&5
+$as_echo "$ac_ct_DUMPBIN" >&6; }
 else
-  { $as_echo "$as_me:$LINENO: result: no" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
 $as_echo "no" >&6; }
 fi
 
-  if test "x$ac_ct_OBJDUMP" = x; then
-    OBJDUMP="false"
+
+  test -n "$ac_ct_DUMPBIN" && break
+done
+
+  if test "x$ac_ct_DUMPBIN" = x; then
+    DUMPBIN=":"
   else
     case $cross_compiling:$ac_tool_warned in
 yes:)
-{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
 ac_tool_warned=yes ;;
 esac
-    OBJDUMP=$ac_ct_OBJDUMP
+    DUMPBIN=$ac_ct_DUMPBIN
   fi
-else
-  OBJDUMP="$ac_cv_prog_OBJDUMP"
 fi
 
-  ;;
 
-esac
+  if test "$DUMPBIN" != ":"; then
+    NM="$DUMPBIN"
+  fi
+fi
+test -z "$NM" && NM=nm
 
-need_locks="$enable_libtool_lock"
 
 
 
-for ac_header in dlfcn.h
-do
-as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
-  { $as_echo "$as_me:$LINENO: checking for $ac_header" >&5
-$as_echo_n "checking for $ac_header... " >&6; }
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
-  $as_echo_n "(cached) " >&6
-fi
-ac_res=`eval 'as_val=${'$as_ac_Header'}
-		 $as_echo "$as_val"'`
-	       { $as_echo "$as_me:$LINENO: result: $ac_res" >&5
-$as_echo "$ac_res" >&6; }
-else
-  # Is the header compilable?
-{ $as_echo "$as_me:$LINENO: checking $ac_header usability" >&5
-$as_echo_n "checking $ac_header usability... " >&6; }
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-$ac_includes_default
-#include <$ac_header>
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_compile") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest.$ac_objext; then
-  ac_header_compiler=yes
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
 
-	ac_header_compiler=no
-fi
 
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-{ $as_echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
-$as_echo "$ac_header_compiler" >&6; }
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking the name lister ($NM) interface" >&5
+$as_echo_n "checking the name lister ($NM) interface... " >&6; }
+if test "${lt_cv_nm_interface+set}" = set; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_nm_interface="BSD nm"
+  echo "int some_variable = 0;" > conftest.$ac_ext
+  (eval echo "\"\$as_me:6635: $ac_compile\"" >&5)
+  (eval "$ac_compile" 2>conftest.err)
+  cat conftest.err >&5
+  (eval echo "\"\$as_me:6638: $NM \\\"conftest.$ac_objext\\\"\"" >&5)
+  (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out)
+  cat conftest.err >&5
+  (eval echo "\"\$as_me:6641: output\"" >&5)
+  cat conftest.out >&5
+  if $GREP 'External.*some_variable' conftest.out > /dev/null; then
+    lt_cv_nm_interface="MS dumpbin"
+  fi
+  rm -f conftest*
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_nm_interface" >&5
+$as_echo "$lt_cv_nm_interface" >&6; }
 
-# Is the header present?
-{ $as_echo "$as_me:$LINENO: checking $ac_header presence" >&5
-$as_echo_n "checking $ac_header presence... " >&6; }
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-#include <$ac_header>
-_ACEOF
-if { (ac_try="$ac_cpp conftest.$ac_ext"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } >/dev/null && {
-	 test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       }; then
-  ac_header_preproc=yes
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ln -s works" >&5
+$as_echo_n "checking whether ln -s works... " >&6; }
+LN_S=$as_ln_s
+if test "$LN_S" = "ln -s"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
 else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-  ac_header_preproc=no
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no, using $LN_S" >&5
+$as_echo "no, using $LN_S" >&6; }
 fi
 
-rm -f conftest.err conftest.$ac_ext
-{ $as_echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
-$as_echo "$ac_header_preproc" >&6; }
+# find the maximum length of command line arguments
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking the maximum length of command line arguments" >&5
+$as_echo_n "checking the maximum length of command line arguments... " >&6; }
+if test "${lt_cv_sys_max_cmd_len+set}" = set; then :
+  $as_echo_n "(cached) " >&6
+else
+    i=0
+  teststring="ABCD"
 
-# So?  What about this header?
-case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in
-  yes:no: )
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
-$as_echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5
-$as_echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;}
-    ac_header_preproc=yes
+  case $build_os in
+  msdosdjgpp*)
+    # On DJGPP, this test can blow up pretty badly due to problems in libc
+    # (any single argument exceeding 2000 bytes causes a buffer overrun
+    # during glob expansion).  Even if it were fixed, the result of this
+    # check would be larger than it should be.
+    lt_cv_sys_max_cmd_len=12288;    # 12K is about right
     ;;
-  no:yes:* )
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5
-$as_echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header:     check for missing prerequisite headers?" >&5
-$as_echo "$as_me: WARNING: $ac_header:     check for missing prerequisite headers?" >&2;}
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5
-$as_echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;}
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header:     section \"Present But Cannot Be Compiled\"" >&5
-$as_echo "$as_me: WARNING: $ac_header:     section \"Present But Cannot Be Compiled\"" >&2;}
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
-$as_echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5
-$as_echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;}
-    ( cat <<\_ASBOX
-## --------------------------------------------------- ##
-## Report this to oleh_derevenko@users.sourceforge.net ##
-## --------------------------------------------------- ##
-_ASBOX
-     ) | sed "s/^/$as_me: WARNING:     /" >&2
+
+  gnu*)
+    # Under GNU Hurd, this test is not required because there is
+    # no limit to the length of command line arguments.
+    # Libtool will interpret -1 as no limit whatsoever
+    lt_cv_sys_max_cmd_len=-1;
     ;;
-esac
-{ $as_echo "$as_me:$LINENO: checking for $ac_header" >&5
-$as_echo_n "checking for $ac_header... " >&6; }
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
-  $as_echo_n "(cached) " >&6
-else
-  eval "$as_ac_Header=\$ac_header_preproc"
-fi
-ac_res=`eval 'as_val=${'$as_ac_Header'}
-		 $as_echo "$as_val"'`
-	       { $as_echo "$as_me:$LINENO: result: $ac_res" >&5
-$as_echo "$ac_res" >&6; }
+
+  cygwin* | mingw* | cegcc*)
+    # On Win9x/ME, this test blows up -- it succeeds, but takes
+    # about 5 minutes as the teststring grows exponentially.
+    # Worse, since 9x/ME are not pre-emptively multitasking,
+    # you end up with a "frozen" computer, even though with patience
+    # the test eventually succeeds (with a max line length of 256k).
+    # Instead, let's just punt: use the minimum linelength reported by
+    # all of the supported platforms: 8192 (on NT/2K/XP).
+    lt_cv_sys_max_cmd_len=8192;
+    ;;
+
+  amigaos*)
+    # On AmigaOS with pdksh, this test takes hours, literally.
+    # So we just punt and use a minimum line length of 8192.
+    lt_cv_sys_max_cmd_len=8192;
+    ;;
+
+  netbsd* | freebsd* | openbsd* | darwin* | dragonfly*)
+    # This has been around since 386BSD, at least.  Likely further.
+    if test -x /sbin/sysctl; then
+      lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax`
+    elif test -x /usr/sbin/sysctl; then
+      lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax`
+    else
+      lt_cv_sys_max_cmd_len=65536	# usable default for all BSDs
+    fi
+    # And add a safety zone
+    lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
+    lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
+    ;;
+
+  interix*)
+    # We know the value 262144 and hardcode it with a safety zone (like BSD)
+    lt_cv_sys_max_cmd_len=196608
+    ;;
+
+  osf*)
+    # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure
+    # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not
+    # nice to cause kernel panics so lets avoid the loop below.
+    # First set a reasonable default.
+    lt_cv_sys_max_cmd_len=16384
+    #
+    if test -x /sbin/sysconfig; then
+      case `/sbin/sysconfig -q proc exec_disable_arg_limit` in
+        *1*) lt_cv_sys_max_cmd_len=-1 ;;
+      esac
+    fi
+    ;;
+  sco3.2v5*)
+    lt_cv_sys_max_cmd_len=102400
+    ;;
+  sysv5* | sco5v6* | sysv4.2uw2*)
+    kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null`
+    if test -n "$kargmax"; then
+      lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[	 ]//'`
+    else
+      lt_cv_sys_max_cmd_len=32768
+    fi
+    ;;
+  *)
+    lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null`
+    if test -n "$lt_cv_sys_max_cmd_len"; then
+      lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
+      lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
+    else
+      # Make teststring a little bigger before we do anything with it.
+      # a 1K string should be a reasonable start.
+      for i in 1 2 3 4 5 6 7 8 ; do
+        teststring=$teststring$teststring
+      done
+      SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}}
+      # If test is not a shell built-in, we'll probably end up computing a
+      # maximum length that is only half of the actual maximum length, but
+      # we can't tell.
+      while { test "X"`$SHELL $0 --fallback-echo "X$teststring$teststring" 2>/dev/null` \
+	         = "XX$teststring$teststring"; } >/dev/null 2>&1 &&
+	      test $i != 17 # 1/2 MB should be enough
+      do
+        i=`expr $i + 1`
+        teststring=$teststring$teststring
+      done
+      # Only check the string length outside the loop.
+      lt_cv_sys_max_cmd_len=`expr "X$teststring" : ".*" 2>&1`
+      teststring=
+      # Add a significant safety factor because C++ compilers can tack on
+      # massive amounts of additional arguments before passing them to the
+      # linker.  It appears as though 1/2 is a usable value.
+      lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2`
+    fi
+    ;;
+  esac
 
 fi
-as_val=`eval 'as_val=${'$as_ac_Header'}
-		 $as_echo "$as_val"'`
-   if test "x$as_val" = x""yes; then
-  cat >>confdefs.h <<_ACEOF
-#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
-_ACEOF
 
+if test -n $lt_cv_sys_max_cmd_len ; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_sys_max_cmd_len" >&5
+$as_echo "$lt_cv_sys_max_cmd_len" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: none" >&5
+$as_echo "none" >&6; }
 fi
+max_cmd_len=$lt_cv_sys_max_cmd_len
 
-done
 
 
 
-if test -n "$CXX" && ( test "X$CXX" != "Xno" &&
-    ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) ||
-    (test "X$CXX" != "Xg++"))) ; then
-  ac_ext=cpp
-ac_cpp='$CXXCPP $CPPFLAGS'
-ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
-{ $as_echo "$as_me:$LINENO: checking how to run the C++ preprocessor" >&5
-$as_echo_n "checking how to run the C++ preprocessor... " >&6; }
-if test -z "$CXXCPP"; then
-  if test "${ac_cv_prog_CXXCPP+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
-      # Double quotes because CXXCPP needs to be expanded
-    for CXXCPP in "$CXX -E" "/lib/cpp"
-    do
-      ac_preproc_ok=false
-for ac_cxx_preproc_warn_flag in '' yes
-do
-  # Use a header file that comes with gcc, so configuring glibc
-  # with a fresh cross-compiler works.
-  # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-  # <limits.h> exists even on freestanding compilers.
-  # On the NeXT, cc -E runs the code through the compiler's parser,
-  # not just through cpp. "Syntax error" is here to catch this case.
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
-		     Syntax error
-_ACEOF
-if { (ac_try="$ac_cpp conftest.$ac_ext"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } >/dev/null && {
-	 test -z "$ac_cxx_preproc_warn_flag$ac_cxx_werror_flag" ||
-	 test ! -s conftest.err
-       }; then
-  :
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
 
-  # Broken: fails on valid input.
-continue
+
+: ${CP="cp -f"}
+: ${MV="mv -f"}
+: ${RM="rm -f"}
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the shell understands some XSI constructs" >&5
+$as_echo_n "checking whether the shell understands some XSI constructs... " >&6; }
+# Try some XSI features
+xsi_shell=no
+( _lt_dummy="a/b/c"
+  test "${_lt_dummy##*/},${_lt_dummy%/*},"${_lt_dummy%"$_lt_dummy"}, \
+      = c,a/b,, \
+    && eval 'test $(( 1 + 1 )) -eq 2 \
+    && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \
+  && xsi_shell=yes
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $xsi_shell" >&5
+$as_echo "$xsi_shell" >&6; }
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the shell understands \"+=\"" >&5
+$as_echo_n "checking whether the shell understands \"+=\"... " >&6; }
+lt_shell_append=no
+( foo=bar; set foo baz; eval "$1+=\$2" && test "$foo" = barbaz ) \
+    >/dev/null 2>&1 \
+  && lt_shell_append=yes
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_shell_append" >&5
+$as_echo "$lt_shell_append" >&6; }
+
+
+if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
+  lt_unset=unset
+else
+  lt_unset=false
 fi
 
-rm -f conftest.err conftest.$ac_ext
 
-  # OK, works on sane cases.  Now check whether nonexistent headers
-  # can be detected and how.
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-#include <ac_nonexistent.h>
-_ACEOF
-if { (ac_try="$ac_cpp conftest.$ac_ext"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
+
+
+
+# test EBCDIC or ASCII
+case `echo X|tr X '\101'` in
+ A) # ASCII based system
+    # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr
+  lt_SP2NL='tr \040 \012'
+  lt_NL2SP='tr \015\012 \040\040'
+  ;;
+ *) # EBCDIC based system
+  lt_SP2NL='tr \100 \n'
+  lt_NL2SP='tr \r\n \100\100'
+  ;;
 esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } >/dev/null && {
-	 test -z "$ac_cxx_preproc_warn_flag$ac_cxx_werror_flag" ||
-	 test ! -s conftest.err
-       }; then
-  # Broken: success on invalid input.
-continue
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
 
-  # Passes both tests.
-ac_preproc_ok=:
-break
-fi
 
-rm -f conftest.err conftest.$ac_ext
 
-done
-# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
-rm -f conftest.err conftest.$ac_ext
-if $ac_preproc_ok; then
-  break
-fi
 
-    done
-    ac_cv_prog_CXXCPP=$CXXCPP
 
-fi
-  CXXCPP=$ac_cv_prog_CXXCPP
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $LD option to reload object files" >&5
+$as_echo_n "checking for $LD option to reload object files... " >&6; }
+if test "${lt_cv_ld_reload_flag+set}" = set; then :
+  $as_echo_n "(cached) " >&6
 else
-  ac_cv_prog_CXXCPP=$CXXCPP
+  lt_cv_ld_reload_flag='-r'
 fi
-{ $as_echo "$as_me:$LINENO: result: $CXXCPP" >&5
-$as_echo "$CXXCPP" >&6; }
-ac_preproc_ok=false
-for ac_cxx_preproc_warn_flag in '' yes
-do
-  # Use a header file that comes with gcc, so configuring glibc
-  # with a fresh cross-compiler works.
-  # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-  # <limits.h> exists even on freestanding compilers.
-  # On the NeXT, cc -E runs the code through the compiler's parser,
-  # not just through cpp. "Syntax error" is here to catch this case.
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
-		     Syntax error
-_ACEOF
-if { (ac_try="$ac_cpp conftest.$ac_ext"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_reload_flag" >&5
+$as_echo "$lt_cv_ld_reload_flag" >&6; }
+reload_flag=$lt_cv_ld_reload_flag
+case $reload_flag in
+"" | " "*) ;;
+*) reload_flag=" $reload_flag" ;;
+esac
+reload_cmds='$LD$reload_flag -o $output$reload_objs'
+case $host_os in
+  darwin*)
+    if test "$GCC" = yes; then
+      reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs'
+    else
+      reload_cmds='$LD$reload_flag -o $output$reload_objs'
+    fi
+    ;;
 esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } >/dev/null && {
-	 test -z "$ac_cxx_preproc_warn_flag$ac_cxx_werror_flag" ||
-	 test ! -s conftest.err
-       }; then
-  :
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-  # Broken: fails on valid input.
-continue
-fi
 
-rm -f conftest.err conftest.$ac_ext
 
-  # OK, works on sane cases.  Now check whether nonexistent headers
-  # can be detected and how.
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-#include <ac_nonexistent.h>
-_ACEOF
-if { (ac_try="$ac_cpp conftest.$ac_ext"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } >/dev/null && {
-	 test -z "$ac_cxx_preproc_warn_flag$ac_cxx_werror_flag" ||
-	 test ! -s conftest.err
-       }; then
-  # Broken: success on invalid input.
-continue
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
 
-  # Passes both tests.
-ac_preproc_ok=:
-break
-fi
 
-rm -f conftest.err conftest.$ac_ext
 
-done
-# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
-rm -f conftest.err conftest.$ac_ext
-if $ac_preproc_ok; then
-  :
-else
-  { { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5
-$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-{ { $as_echo "$as_me:$LINENO: error: C++ preprocessor \"$CXXCPP\" fails sanity check
-See \`config.log' for more details." >&5
-$as_echo "$as_me: error: C++ preprocessor \"$CXXCPP\" fails sanity check
-See \`config.log' for more details." >&2;}
-   { (exit 1); exit 1; }; }; }
-fi
 
-ac_ext=cpp
-ac_cpp='$CXXCPP $CPPFLAGS'
-ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
 
-fi
 
 
-ac_ext=f
-ac_compile='$F77 -c $FFLAGS conftest.$ac_ext >&5'
-ac_link='$F77 -o conftest$ac_exeext $FFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_f77_compiler_gnu
 if test -n "$ac_tool_prefix"; then
-  for ac_prog in g77 xlf f77 frt pgf77 cf77 fort77 fl32 af77 xlf90 f90 pgf90 pghpf epcf90 gfortran g95 xlf95 f95 fort ifort ifc efc pgf95 lf95 ftn
-  do
-    # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
-set dummy $ac_tool_prefix$ac_prog; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+  # Extract the first word of "${ac_tool_prefix}objdump", so it can be a program name with args.
+set dummy ${ac_tool_prefix}objdump; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 $as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_F77+set}" = set; then
+if test "${ac_cv_prog_OBJDUMP+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
-  if test -n "$F77"; then
-  ac_cv_prog_F77="$F77" # Let the user override the test.
+  if test -n "$OBJDUMP"; then
+  ac_cv_prog_OBJDUMP="$OBJDUMP" # Let the user override the test.
 else
 as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
 for as_dir in $PATH
 do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
   if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-    ac_cv_prog_F77="$ac_tool_prefix$ac_prog"
-    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    ac_cv_prog_OBJDUMP="${ac_tool_prefix}objdump"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
-done
+  done
 IFS=$as_save_IFS
 
 fi
 fi
-F77=$ac_cv_prog_F77
-if test -n "$F77"; then
-  { $as_echo "$as_me:$LINENO: result: $F77" >&5
-$as_echo "$F77" >&6; }
+OBJDUMP=$ac_cv_prog_OBJDUMP
+if test -n "$OBJDUMP"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OBJDUMP" >&5
+$as_echo "$OBJDUMP" >&6; }
 else
-  { $as_echo "$as_me:$LINENO: result: no" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
 $as_echo "no" >&6; }
 fi
 
 
-    test -n "$F77" && break
-  done
 fi
-if test -z "$F77"; then
-  ac_ct_F77=$F77
-  for ac_prog in g77 xlf f77 frt pgf77 cf77 fort77 fl32 af77 xlf90 f90 pgf90 pghpf epcf90 gfortran g95 xlf95 f95 fort ifort ifc efc pgf95 lf95 ftn
-do
-  # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+if test -z "$ac_cv_prog_OBJDUMP"; then
+  ac_ct_OBJDUMP=$OBJDUMP
+  # Extract the first word of "objdump", so it can be a program name with args.
+set dummy objdump; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 $as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_ac_ct_F77+set}" = set; then
+if test "${ac_cv_prog_ac_ct_OBJDUMP+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
-  if test -n "$ac_ct_F77"; then
-  ac_cv_prog_ac_ct_F77="$ac_ct_F77" # Let the user override the test.
+  if test -n "$ac_ct_OBJDUMP"; then
+  ac_cv_prog_ac_ct_OBJDUMP="$ac_ct_OBJDUMP" # Let the user override the test.
 else
 as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
 for as_dir in $PATH
 do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
   if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-    ac_cv_prog_ac_ct_F77="$ac_prog"
-    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    ac_cv_prog_ac_ct_OBJDUMP="objdump"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
-done
+  done
 IFS=$as_save_IFS
 
 fi
 fi
-ac_ct_F77=$ac_cv_prog_ac_ct_F77
-if test -n "$ac_ct_F77"; then
-  { $as_echo "$as_me:$LINENO: result: $ac_ct_F77" >&5
-$as_echo "$ac_ct_F77" >&6; }
+ac_ct_OBJDUMP=$ac_cv_prog_ac_ct_OBJDUMP
+if test -n "$ac_ct_OBJDUMP"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OBJDUMP" >&5
+$as_echo "$ac_ct_OBJDUMP" >&6; }
 else
-  { $as_echo "$as_me:$LINENO: result: no" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
 $as_echo "no" >&6; }
 fi
 
-
-  test -n "$ac_ct_F77" && break
-done
-
-  if test "x$ac_ct_F77" = x; then
-    F77=""
+  if test "x$ac_ct_OBJDUMP" = x; then
+    OBJDUMP="false"
   else
     case $cross_compiling:$ac_tool_warned in
 yes:)
-{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
 ac_tool_warned=yes ;;
 esac
-    F77=$ac_ct_F77
+    OBJDUMP=$ac_ct_OBJDUMP
   fi
+else
+  OBJDUMP="$ac_cv_prog_OBJDUMP"
 fi
 
+test -z "$OBJDUMP" && OBJDUMP=objdump
 
-# Provide some information about the compiler.
-$as_echo "$as_me:$LINENO: checking for Fortran 77 compiler version" >&5
-set X $ac_compile
-ac_compiler=$2
-{ (ac_try="$ac_compiler --version >&5"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_compiler --version >&5") 2>&5
-  ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }
-{ (ac_try="$ac_compiler -v >&5"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_compiler -v >&5") 2>&5
-  ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }
-{ (ac_try="$ac_compiler -V >&5"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_compiler -V >&5") 2>&5
-  ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }
-rm -f a.out
-
-# If we don't use `.F' as extension, the preprocessor is not run on the
-# input file.  (Note that this only needs to work for GNU compilers.)
-ac_save_ext=$ac_ext
-ac_ext=F
-{ $as_echo "$as_me:$LINENO: checking whether we are using the GNU Fortran 77 compiler" >&5
-$as_echo_n "checking whether we are using the GNU Fortran 77 compiler... " >&6; }
-if test "${ac_cv_f77_compiler_gnu+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-      program main
-#ifndef __GNUC__
-       choke me
-#endif
 
-      end
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_compile") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_f77_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest.$ac_objext; then
-  ac_compiler_gnu=yes
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
 
-	ac_compiler_gnu=no
-fi
 
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-ac_cv_f77_compiler_gnu=$ac_compiler_gnu
 
-fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_f77_compiler_gnu" >&5
-$as_echo "$ac_cv_f77_compiler_gnu" >&6; }
-ac_ext=$ac_save_ext
-ac_test_FFLAGS=${FFLAGS+set}
-ac_save_FFLAGS=$FFLAGS
-FFLAGS=
-{ $as_echo "$as_me:$LINENO: checking whether $F77 accepts -g" >&5
-$as_echo_n "checking whether $F77 accepts -g... " >&6; }
-if test "${ac_cv_prog_f77_g+set}" = set; then
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to recognize dependent libraries" >&5
+$as_echo_n "checking how to recognize dependent libraries... " >&6; }
+if test "${lt_cv_deplibs_check_method+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
-  FFLAGS=-g
-cat >conftest.$ac_ext <<_ACEOF
-      program main
+  lt_cv_file_magic_cmd='$MAGIC_CMD'
+lt_cv_file_magic_test_file=
+lt_cv_deplibs_check_method='unknown'
+# Need to set the preceding variable on all platforms that support
+# interlibrary dependencies.
+# 'none' -- dependencies not supported.
+# `unknown' -- same as none, but documents that we really don't know.
+# 'pass_all' -- all dependencies passed with no checks.
+# 'test_compile' -- check by making test program.
+# 'file_magic [[regex]]' -- check by looking for files in library path
+# which responds to the $file_magic_cmd with a given extended regex.
+# If you have `file' or equivalent on your system and you're not sure
+# whether `pass_all' will *always* work, you probably want this one.
 
-      end
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_compile") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_f77_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest.$ac_objext; then
-  ac_cv_prog_f77_g=yes
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
+case $host_os in
+aix[4-9]*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
 
-	ac_cv_prog_f77_g=no
-fi
+beos*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
 
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+bsdi[45]*)
+  lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)'
+  lt_cv_file_magic_cmd='/usr/bin/file -L'
+  lt_cv_file_magic_test_file=/shlib/libc.so
+  ;;
 
-fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_prog_f77_g" >&5
-$as_echo "$ac_cv_prog_f77_g" >&6; }
-if test "$ac_test_FFLAGS" = set; then
-  FFLAGS=$ac_save_FFLAGS
-elif test $ac_cv_prog_f77_g = yes; then
-  if test "x$ac_cv_f77_compiler_gnu" = xyes; then
-    FFLAGS="-g -O2"
-  else
-    FFLAGS="-g"
-  fi
-else
-  if test "x$ac_cv_f77_compiler_gnu" = xyes; then
-    FFLAGS="-O2"
+cygwin*)
+  # func_win32_libid is a shell function defined in ltmain.sh
+  lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
+  lt_cv_file_magic_cmd='func_win32_libid'
+  ;;
+
+mingw* | pw32*)
+  # Base MSYS/MinGW do not provide the 'file' command needed by
+  # func_win32_libid shell function, so use a weaker test based on 'objdump',
+  # unless we find 'file', for example because we are cross-compiling.
+  if ( file / ) >/dev/null 2>&1; then
+    lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
+    lt_cv_file_magic_cmd='func_win32_libid'
   else
-    FFLAGS=
+    lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
+    lt_cv_file_magic_cmd='$OBJDUMP -f'
   fi
-fi
-
-if test $ac_compiler_gnu = yes; then
-  G77=yes
-else
-  G77=
-fi
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
+  ;;
 
+cegcc)
+  # use the weaker test based on 'objdump'. See mingw*.
+  lt_cv_deplibs_check_method='file_magic file format pe-arm-.*little(.*architecture: arm)?'
+  lt_cv_file_magic_cmd='$OBJDUMP -f'
+  ;;
 
+darwin* | rhapsody*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
 
-# Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers!
-# find the maximum length of command line arguments
-{ $as_echo "$as_me:$LINENO: checking the maximum length of command line arguments" >&5
-$as_echo_n "checking the maximum length of command line arguments... " >&6; }
-if test "${lt_cv_sys_max_cmd_len+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
-    i=0
-  teststring="ABCD"
+freebsd* | dragonfly*)
+  if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
+    case $host_cpu in
+    i*86 )
+      # Not sure whether the presence of OpenBSD here was a mistake.
+      # Let's accept both of them until this is cleared up.
+      lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[3-9]86 (compact )?demand paged shared library'
+      lt_cv_file_magic_cmd=/usr/bin/file
+      lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
+      ;;
+    esac
+  else
+    lt_cv_deplibs_check_method=pass_all
+  fi
+  ;;
 
-  case $build_os in
-  msdosdjgpp*)
-    # On DJGPP, this test can blow up pretty badly due to problems in libc
-    # (any single argument exceeding 2000 bytes causes a buffer overrun
-    # during glob expansion).  Even if it were fixed, the result of this
-    # check would be larger than it should be.
-    lt_cv_sys_max_cmd_len=12288;    # 12K is about right
-    ;;
+gnu*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
 
-  gnu*)
-    # Under GNU Hurd, this test is not required because there is
-    # no limit to the length of command line arguments.
-    # Libtool will interpret -1 as no limit whatsoever
-    lt_cv_sys_max_cmd_len=-1;
-    ;;
-
-  cygwin* | mingw*)
-    # On Win9x/ME, this test blows up -- it succeeds, but takes
-    # about 5 minutes as the teststring grows exponentially.
-    # Worse, since 9x/ME are not pre-emptively multitasking,
-    # you end up with a "frozen" computer, even though with patience
-    # the test eventually succeeds (with a max line length of 256k).
-    # Instead, let's just punt: use the minimum linelength reported by
-    # all of the supported platforms: 8192 (on NT/2K/XP).
-    lt_cv_sys_max_cmd_len=8192;
-    ;;
-
-  amigaos*)
-    # On AmigaOS with pdksh, this test takes hours, literally.
-    # So we just punt and use a minimum line length of 8192.
-    lt_cv_sys_max_cmd_len=8192;
-    ;;
-
-  netbsd* | freebsd* | openbsd* | darwin* | dragonfly*)
-    # This has been around since 386BSD, at least.  Likely further.
-    if test -x /sbin/sysctl; then
-      lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax`
-    elif test -x /usr/sbin/sysctl; then
-      lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax`
-    else
-      lt_cv_sys_max_cmd_len=65536	# usable default for all BSDs
-    fi
-    # And add a safety zone
-    lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
-    lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
-    ;;
-
-  interix*)
-    # We know the value 262144 and hardcode it with a safety zone (like BSD)
-    lt_cv_sys_max_cmd_len=196608
-    ;;
-
-  osf*)
-    # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure
-    # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not
-    # nice to cause kernel panics so lets avoid the loop below.
-    # First set a reasonable default.
-    lt_cv_sys_max_cmd_len=16384
-    #
-    if test -x /sbin/sysconfig; then
-      case `/sbin/sysconfig -q proc exec_disable_arg_limit` in
-        *1*) lt_cv_sys_max_cmd_len=-1 ;;
-      esac
-    fi
-    ;;
-  sco3.2v5*)
-    lt_cv_sys_max_cmd_len=102400
+hpux10.20* | hpux11*)
+  lt_cv_file_magic_cmd=/usr/bin/file
+  case $host_cpu in
+  ia64*)
+    lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - IA64'
+    lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
     ;;
-  sysv5* | sco5v6* | sysv4.2uw2*)
-    kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null`
-    if test -n "$kargmax"; then
-      lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[ 	]//'`
-    else
-      lt_cv_sys_max_cmd_len=32768
-    fi
+  hppa*64*)
+    lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - PA-RISC [0-9].[0-9]'
+    lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl
     ;;
   *)
-    lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null`
-    if test -n "$lt_cv_sys_max_cmd_len"; then
-      lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
-      lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
-    else
-      SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}}
-      while (test "X"`$SHELL $0 --fallback-echo "X$teststring" 2>/dev/null` \
-	       = "XX$teststring") >/dev/null 2>&1 &&
-	      new_result=`expr "X$teststring" : ".*" 2>&1` &&
-	      lt_cv_sys_max_cmd_len=$new_result &&
-	      test $i != 17 # 1/2 MB should be enough
-      do
-        i=`expr $i + 1`
-        teststring=$teststring$teststring
-      done
-      teststring=
-      # Add a significant safety factor because C++ compilers can tack on massive
-      # amounts of additional arguments before passing them to the linker.
-      # It appears as though 1/2 is a usable value.
-      lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2`
-    fi
+    lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9].[0-9]) shared library'
+    lt_cv_file_magic_test_file=/usr/lib/libc.sl
     ;;
   esac
+  ;;
 
-fi
-
-if test -n $lt_cv_sys_max_cmd_len ; then
-  { $as_echo "$as_me:$LINENO: result: $lt_cv_sys_max_cmd_len" >&5
-$as_echo "$lt_cv_sys_max_cmd_len" >&6; }
-else
-  { $as_echo "$as_me:$LINENO: result: none" >&5
-$as_echo "none" >&6; }
-fi
-
-
-
-
-
-# Check for command to grab the raw symbol name followed by C symbol from nm.
-{ $as_echo "$as_me:$LINENO: checking command to parse $NM output from $compiler object" >&5
-$as_echo_n "checking command to parse $NM output from $compiler object... " >&6; }
-if test "${lt_cv_sys_global_symbol_pipe+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
-
-# These are sane defaults that work on at least a few old systems.
-# [They come from Ultrix.  What could be older than Ultrix?!! ;)]
-
-# Character class describing NM global symbol codes.
-symcode='[BCDEGRST]'
-
-# Regexp to match symbols that can be accessed directly from C.
-sympat='\([_A-Za-z][_A-Za-z0-9]*\)'
+interix[3-9]*)
+  # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here
+  lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|\.a)$'
+  ;;
 
-# Transform an extracted symbol line into a proper C declaration
-lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern int \1;/p'"
+irix5* | irix6* | nonstopux*)
+  case $LD in
+  *-32|*"-32 ") libmagic=32-bit;;
+  *-n32|*"-n32 ") libmagic=N32;;
+  *-64|*"-64 ") libmagic=64-bit;;
+  *) libmagic=never-match;;
+  esac
+  lt_cv_deplibs_check_method=pass_all
+  ;;
 
-# Transform an extracted symbol line into symbol name and symbol address
-lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/  {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode \([^ ]*\) \([^ ]*\)$/  {\"\2\", (lt_ptr) \&\2},/p'"
+# This must be Linux ELF.
+linux* | k*bsd*-gnu)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
 
-# Define system-specific variables.
-case $host_os in
-aix*)
-  symcode='[BCDT]'
+netbsd* | netbsdelf*-gnu)
+  if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
+    lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$'
+  else
+    lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|_pic\.a)$'
+  fi
   ;;
-cygwin* | mingw* | pw32*)
-  symcode='[ABCDGISTW]'
+
+newos6*)
+  lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)'
+  lt_cv_file_magic_cmd=/usr/bin/file
+  lt_cv_file_magic_test_file=/usr/lib/libnls.so
   ;;
-hpux*) # Its linker distinguishes data from code symbols
-  if test "$host_cpu" = ia64; then
-    symcode='[ABCDEGRST]'
-  fi
-  lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
-  lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/  {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/  {\"\2\", (lt_ptr) \&\2},/p'"
+
+*nto* | *qnx*)
+  lt_cv_deplibs_check_method=pass_all
   ;;
-linux* | k*bsd*-gnu)
-  if test "$host_cpu" = ia64; then
-    symcode='[ABCDGIRSTW]'
-    lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
-    lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/  {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/  {\"\2\", (lt_ptr) \&\2},/p'"
+
+openbsd*)
+  if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+    lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|\.so|_pic\.a)$'
+  else
+    lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$'
   fi
   ;;
-irix* | nonstopux*)
-  symcode='[BCDEGRST]'
+
+osf3* | osf4* | osf5*)
+  lt_cv_deplibs_check_method=pass_all
   ;;
-osf*)
-  symcode='[BCDEGQRST]'
+
+rdos*)
+  lt_cv_deplibs_check_method=pass_all
   ;;
+
 solaris*)
-  symcode='[BDRT]'
-  ;;
-sco3.2v5*)
-  symcode='[DT]'
-  ;;
-sysv4.2uw2*)
-  symcode='[DT]'
+  lt_cv_deplibs_check_method=pass_all
   ;;
-sysv5* | sco5v6* | unixware* | OpenUNIX*)
-  symcode='[ABDT]'
+
+sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
+  lt_cv_deplibs_check_method=pass_all
   ;;
-sysv4)
-  symcode='[DFNSTU]'
+
+sysv4 | sysv4.3*)
+  case $host_vendor in
+  motorola)
+    lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]'
+    lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
+    ;;
+  ncr)
+    lt_cv_deplibs_check_method=pass_all
+    ;;
+  sequent)
+    lt_cv_file_magic_cmd='/bin/file'
+    lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )'
+    ;;
+  sni)
+    lt_cv_file_magic_cmd='/bin/file'
+    lt_cv_deplibs_check_method="file_magic ELF [0-9][0-9]*-bit [LM]SB dynamic lib"
+    lt_cv_file_magic_test_file=/lib/libc.so
+    ;;
+  siemens)
+    lt_cv_deplibs_check_method=pass_all
+    ;;
+  pc)
+    lt_cv_deplibs_check_method=pass_all
+    ;;
+  esac
   ;;
-esac
 
-# Handle CRLF in mingw tool chain
-opt_cr=
-case $build_os in
-mingw*)
-  opt_cr=`echo 'x\{0,1\}' | tr x '\015'` # option cr in regexp
+tpf*)
+  lt_cv_deplibs_check_method=pass_all
   ;;
 esac
 
-# If we're using GNU nm, then use its standard symbol codes.
-case `$NM -V 2>&1` in
-*GNU* | *'with BFD'*)
-  symcode='[ABCDGIRSTW]' ;;
-esac
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_deplibs_check_method" >&5
+$as_echo "$lt_cv_deplibs_check_method" >&6; }
+file_magic_cmd=$lt_cv_file_magic_cmd
+deplibs_check_method=$lt_cv_deplibs_check_method
+test -z "$deplibs_check_method" && deplibs_check_method=unknown
 
-# Try without a prefix undercore, then with it.
-for ac_symprfx in "" "_"; do
 
-  # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol.
-  symxfrm="\\1 $ac_symprfx\\2 \\2"
 
-  # Write the raw and C identifiers.
-  lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[ 	]\($symcode$symcode*\)[ 	][ 	]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'"
 
-  # Check to see that the pipe works correctly.
-  pipe_works=no
 
-  rm -f conftest*
-  cat > conftest.$ac_ext <<EOF
-#ifdef __cplusplus
-extern "C" {
-#endif
-char nm_test_var;
-void nm_test_func(){}
-#ifdef __cplusplus
-}
-#endif
-int main(){nm_test_var='a';nm_test_func();return(0);}
-EOF
 
-  if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; then
-    # Now try to grab the symbols.
-    nlist=conftest.nm
-    if { (eval echo "$as_me:$LINENO: \"$NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist\"") >&5
-  (eval $NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) 2>&5
-  ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && test -s "$nlist"; then
-      # Try sorting and uniquifying the output.
-      if sort "$nlist" | uniq > "$nlist"T; then
-	mv -f "$nlist"T "$nlist"
-      else
-	rm -f "$nlist"T
-      fi
 
-      # Make sure that we snagged all the symbols we need.
-      if grep ' nm_test_var$' "$nlist" >/dev/null; then
-	if grep ' nm_test_func$' "$nlist" >/dev/null; then
-	  cat <<EOF > conftest.$ac_ext
-#ifdef __cplusplus
-extern "C" {
-#endif
 
-EOF
-	  # Now generate the symbol file.
-	  eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | grep -v main >> conftest.$ac_ext'
 
-	  cat <<EOF >> conftest.$ac_ext
-#if defined (__STDC__) && __STDC__
-# define lt_ptr_t void *
-#else
-# define lt_ptr_t char *
-# define const
-#endif
-
-/* The mapping between symbol names and symbols. */
-const struct {
-  const char *name;
-  lt_ptr_t address;
-}
-lt_preloaded_symbols[] =
-{
-EOF
-	  $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/  {\"\2\", (lt_ptr_t) \&\2},/" < "$nlist" | grep -v main >> conftest.$ac_ext
-	  cat <<\EOF >> conftest.$ac_ext
-  {0, (lt_ptr_t) 0}
-};
-
-#ifdef __cplusplus
-}
-#endif
-EOF
-	  # Now try linking the two files.
-	  mv conftest.$ac_objext conftstm.$ac_objext
-	  lt_save_LIBS="$LIBS"
-	  lt_save_CFLAGS="$CFLAGS"
-	  LIBS="conftstm.$ac_objext"
-	  CFLAGS="$CFLAGS$lt_prog_compiler_no_builtin_flag"
-	  if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && test -s conftest${ac_exeext}; then
-	    pipe_works=yes
-	  fi
-	  LIBS="$lt_save_LIBS"
-	  CFLAGS="$lt_save_CFLAGS"
-	else
-	  echo "cannot find nm_test_func in $nlist" >&5
-	fi
-      else
-	echo "cannot find nm_test_var in $nlist" >&5
-      fi
-    else
-      echo "cannot run $lt_cv_sys_global_symbol_pipe" >&5
-    fi
-  else
-    echo "$progname: failed program was:" >&5
-    cat conftest.$ac_ext >&5
-  fi
-  rm -rf conftest* conftst*
-
-  # Do not use the global_symbol_pipe unless it works.
-  if test "$pipe_works" = yes; then
-    break
-  else
-    lt_cv_sys_global_symbol_pipe=
-  fi
-done
-
-fi
-
-if test -z "$lt_cv_sys_global_symbol_pipe"; then
-  lt_cv_sys_global_symbol_to_cdecl=
-fi
-if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then
-  { $as_echo "$as_me:$LINENO: result: failed" >&5
-$as_echo "failed" >&6; }
-else
-  { $as_echo "$as_me:$LINENO: result: ok" >&5
-$as_echo "ok" >&6; }
-fi
-
-{ $as_echo "$as_me:$LINENO: checking for objdir" >&5
-$as_echo_n "checking for objdir... " >&6; }
-if test "${lt_cv_objdir+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
-  rm -f .libs 2>/dev/null
-mkdir .libs 2>/dev/null
-if test -d .libs; then
-  lt_cv_objdir=.libs
-else
-  # MS-DOS does not allow filenames that begin with a dot.
-  lt_cv_objdir=_libs
-fi
-rmdir .libs 2>/dev/null
-fi
-{ $as_echo "$as_me:$LINENO: result: $lt_cv_objdir" >&5
-$as_echo "$lt_cv_objdir" >&6; }
-objdir=$lt_cv_objdir
-
-
-
-
-
-case $host_os in
-aix3*)
-  # AIX sometimes has problems with the GCC collect2 program.  For some
-  # reason, if we set the COLLECT_NAMES environment variable, the problems
-  # vanish in a puff of smoke.
-  if test "X${COLLECT_NAMES+set}" != Xset; then
-    COLLECT_NAMES=
-    export COLLECT_NAMES
-  fi
-  ;;
-esac
-
-# Sed substitution that helps us do robust quoting.  It backslashifies
-# metacharacters that are still active within double-quoted strings.
-Xsed='sed -e 1s/^X//'
-sed_quote_subst='s/\([\\"\\`$\\\\]\)/\\\1/g'
-
-# Same as above, but do not quote variable references.
-double_quote_subst='s/\([\\"\\`\\\\]\)/\\\1/g'
-
-# Sed substitution to delay expansion of an escaped shell variable in a
-# double_quote_subst'ed string.
-delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
-
-# Sed substitution to avoid accidental globbing in evaled expressions
-no_glob_subst='s/\*/\\\*/g'
-
-# Constants:
-rm="rm -f"
 
-# Global variables:
-default_ofile=libtool
-can_build_shared=yes
 
-# All known linkers require a `.a' archive for static linking (except MSVC,
-# which needs '.lib').
-libext=a
-ltmain="$ac_aux_dir/ltmain.sh"
-ofile="$default_ofile"
-with_gnu_ld="$lt_cv_prog_gnu_ld"
 
 if test -n "$ac_tool_prefix"; then
   # Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
 set dummy ${ac_tool_prefix}ar; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 $as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_AR+set}" = set; then
+if test "${ac_cv_prog_AR+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
   if test -n "$AR"; then
@@ -8405,24 +7213,24 @@
 do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
   if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_AR="${ac_tool_prefix}ar"
-    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
-done
+  done
 IFS=$as_save_IFS
 
 fi
 fi
 AR=$ac_cv_prog_AR
 if test -n "$AR"; then
-  { $as_echo "$as_me:$LINENO: result: $AR" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AR" >&5
 $as_echo "$AR" >&6; }
 else
-  { $as_echo "$as_me:$LINENO: result: no" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
 $as_echo "no" >&6; }
 fi
 
@@ -8432,9 +7240,9 @@
   ac_ct_AR=$AR
   # Extract the first word of "ar", so it can be a program name with args.
 set dummy ar; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 $as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_ac_ct_AR+set}" = set; then
+if test "${ac_cv_prog_ac_ct_AR+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
   if test -n "$ac_ct_AR"; then
@@ -8445,24 +7253,24 @@
 do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
   if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_ac_ct_AR="ar"
-    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
-done
+  done
 IFS=$as_save_IFS
 
 fi
 fi
 ac_ct_AR=$ac_cv_prog_ac_ct_AR
 if test -n "$ac_ct_AR"; then
-  { $as_echo "$as_me:$LINENO: result: $ac_ct_AR" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_AR" >&5
 $as_echo "$ac_ct_AR" >&6; }
 else
-  { $as_echo "$as_me:$LINENO: result: no" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
 $as_echo "no" >&6; }
 fi
 
@@ -8471,7 +7279,7 @@
   else
     case $cross_compiling:$ac_tool_warned in
 yes:)
-{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
 ac_tool_warned=yes ;;
 esac
@@ -8481,213 +7289,218 @@
   AR="$ac_cv_prog_AR"
 fi
 
+test -z "$AR" && AR=ar
+test -z "$AR_FLAGS" && AR_FLAGS=cru
+
+
+
+
+
+
+
+
+
+
+
 if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
-set dummy ${ac_tool_prefix}ranlib; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+  # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
+set dummy ${ac_tool_prefix}strip; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 $as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_RANLIB+set}" = set; then
+if test "${ac_cv_prog_STRIP+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
-  if test -n "$RANLIB"; then
-  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
+  if test -n "$STRIP"; then
+  ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
 else
 as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
 for as_dir in $PATH
 do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
   if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-    ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
-    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    ac_cv_prog_STRIP="${ac_tool_prefix}strip"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
-done
+  done
 IFS=$as_save_IFS
 
 fi
 fi
-RANLIB=$ac_cv_prog_RANLIB
-if test -n "$RANLIB"; then
-  { $as_echo "$as_me:$LINENO: result: $RANLIB" >&5
-$as_echo "$RANLIB" >&6; }
+STRIP=$ac_cv_prog_STRIP
+if test -n "$STRIP"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5
+$as_echo "$STRIP" >&6; }
 else
-  { $as_echo "$as_me:$LINENO: result: no" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
 $as_echo "no" >&6; }
 fi
 
 
 fi
-if test -z "$ac_cv_prog_RANLIB"; then
-  ac_ct_RANLIB=$RANLIB
-  # Extract the first word of "ranlib", so it can be a program name with args.
-set dummy ranlib; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+if test -z "$ac_cv_prog_STRIP"; then
+  ac_ct_STRIP=$STRIP
+  # Extract the first word of "strip", so it can be a program name with args.
+set dummy strip; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 $as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then
+if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
-  if test -n "$ac_ct_RANLIB"; then
-  ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test.
+  if test -n "$ac_ct_STRIP"; then
+  ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.
 else
 as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
 for as_dir in $PATH
 do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
   if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-    ac_cv_prog_ac_ct_RANLIB="ranlib"
-    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    ac_cv_prog_ac_ct_STRIP="strip"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
-done
+  done
 IFS=$as_save_IFS
 
 fi
 fi
-ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB
-if test -n "$ac_ct_RANLIB"; then
-  { $as_echo "$as_me:$LINENO: result: $ac_ct_RANLIB" >&5
-$as_echo "$ac_ct_RANLIB" >&6; }
+ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
+if test -n "$ac_ct_STRIP"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5
+$as_echo "$ac_ct_STRIP" >&6; }
 else
-  { $as_echo "$as_me:$LINENO: result: no" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
 $as_echo "no" >&6; }
 fi
 
-  if test "x$ac_ct_RANLIB" = x; then
-    RANLIB=":"
+  if test "x$ac_ct_STRIP" = x; then
+    STRIP=":"
   else
     case $cross_compiling:$ac_tool_warned in
 yes:)
-{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
 ac_tool_warned=yes ;;
 esac
-    RANLIB=$ac_ct_RANLIB
+    STRIP=$ac_ct_STRIP
   fi
 else
-  RANLIB="$ac_cv_prog_RANLIB"
+  STRIP="$ac_cv_prog_STRIP"
 fi
 
+test -z "$STRIP" && STRIP=:
+
+
+
+
+
+
 if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
-set dummy ${ac_tool_prefix}strip; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+  # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
+set dummy ${ac_tool_prefix}ranlib; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 $as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_STRIP+set}" = set; then
+if test "${ac_cv_prog_RANLIB+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
-  if test -n "$STRIP"; then
-  ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
+  if test -n "$RANLIB"; then
+  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
 else
 as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
 for as_dir in $PATH
 do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
   if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-    ac_cv_prog_STRIP="${ac_tool_prefix}strip"
-    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
-done
+  done
 IFS=$as_save_IFS
 
 fi
 fi
-STRIP=$ac_cv_prog_STRIP
-if test -n "$STRIP"; then
-  { $as_echo "$as_me:$LINENO: result: $STRIP" >&5
-$as_echo "$STRIP" >&6; }
+RANLIB=$ac_cv_prog_RANLIB
+if test -n "$RANLIB"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $RANLIB" >&5
+$as_echo "$RANLIB" >&6; }
 else
-  { $as_echo "$as_me:$LINENO: result: no" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
 $as_echo "no" >&6; }
 fi
 
 
 fi
-if test -z "$ac_cv_prog_STRIP"; then
-  ac_ct_STRIP=$STRIP
-  # Extract the first word of "strip", so it can be a program name with args.
-set dummy strip; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
+if test -z "$ac_cv_prog_RANLIB"; then
+  ac_ct_RANLIB=$RANLIB
+  # Extract the first word of "ranlib", so it can be a program name with args.
+set dummy ranlib; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
 $as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then
+if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
-  if test -n "$ac_ct_STRIP"; then
-  ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.
+  if test -n "$ac_ct_RANLIB"; then
+  ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test.
 else
 as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
 for as_dir in $PATH
 do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
   if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-    ac_cv_prog_ac_ct_STRIP="strip"
-    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    ac_cv_prog_ac_ct_RANLIB="ranlib"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
-done
+  done
 IFS=$as_save_IFS
 
 fi
 fi
-ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
-if test -n "$ac_ct_STRIP"; then
-  { $as_echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5
-$as_echo "$ac_ct_STRIP" >&6; }
+ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB
+if test -n "$ac_ct_RANLIB"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_RANLIB" >&5
+$as_echo "$ac_ct_RANLIB" >&6; }
 else
-  { $as_echo "$as_me:$LINENO: result: no" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
 $as_echo "no" >&6; }
 fi
 
-  if test "x$ac_ct_STRIP" = x; then
-    STRIP=":"
+  if test "x$ac_ct_RANLIB" = x; then
+    RANLIB=":"
   else
     case $cross_compiling:$ac_tool_warned in
 yes:)
-{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
 $as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
 ac_tool_warned=yes ;;
 esac
-    STRIP=$ac_ct_STRIP
+    RANLIB=$ac_ct_RANLIB
   fi
 else
-  STRIP="$ac_cv_prog_STRIP"
+  RANLIB="$ac_cv_prog_RANLIB"
 fi
 
+test -z "$RANLIB" && RANLIB=:
 
-old_CC="$CC"
-old_CFLAGS="$CFLAGS"
 
-# Set sane defaults for various variables
-test -z "$AR" && AR=ar
-test -z "$AR_FLAGS" && AR_FLAGS=cru
-test -z "$AS" && AS=as
-test -z "$CC" && CC=cc
-test -z "$LTCC" && LTCC=$CC
-test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS
-test -z "$DLLTOOL" && DLLTOOL=dlltool
-test -z "$LD" && LD=ld
-test -z "$LN_S" && LN_S="ln -s"
-test -z "$MAGIC_CMD" && MAGIC_CMD=file
-test -z "$NM" && NM=nm
-test -z "$SED" && SED=sed
-test -z "$OBJDUMP" && OBJDUMP=objdump
-test -z "$RANLIB" && RANLIB=:
-test -z "$STRIP" && STRIP=:
-test -z "$ac_objext" && ac_objext=o
 
-# Determine commands to create old-style static archives.
+
+
+
+# Determine commands to create old-style static archives.
 old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs'
 old_postinstall_cmds='chmod 644 $oldlib'
 old_postuninstall_cmds=
@@ -8704,1485 +7517,1019 @@
   old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib"
 fi
 
-for cc_temp in $compiler""; do
-  case $cc_temp in
-    compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
-    distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
-    \-*) ;;
-    *) break;;
-  esac
-done
-cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
 
 
-# Only perform the check for file, if the check method requires it
-case $deplibs_check_method in
-file_magic*)
-  if test "$file_magic_cmd" = '$MAGIC_CMD'; then
-    { $as_echo "$as_me:$LINENO: checking for ${ac_tool_prefix}file" >&5
-$as_echo_n "checking for ${ac_tool_prefix}file... " >&6; }
-if test "${lt_cv_path_MAGIC_CMD+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
-  case $MAGIC_CMD in
-[\\/*] |  ?:[\\/]*)
-  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
-  ;;
-*)
-  lt_save_MAGIC_CMD="$MAGIC_CMD"
-  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-  ac_dummy="/usr/bin$PATH_SEPARATOR$PATH"
-  for ac_dir in $ac_dummy; do
-    IFS="$lt_save_ifs"
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/${ac_tool_prefix}file; then
-      lt_cv_path_MAGIC_CMD="$ac_dir/${ac_tool_prefix}file"
-      if test -n "$file_magic_test_file"; then
-	case $deplibs_check_method in
-	"file_magic "*)
-	  file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
-	  MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-	  if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
-	    $EGREP "$file_magic_regex" > /dev/null; then
-	    :
-	  else
-	    cat <<EOF 1>&2
 
-*** Warning: the command libtool uses to detect shared libraries,
-*** $file_magic_cmd, produces output that libtool cannot recognize.
-*** The result is that libtool may fail to recognize shared libraries
-*** as such.  This will affect the creation of libtool libraries that
-*** depend on shared libraries, but programs linked with such libtool
-*** libraries will work regardless of this problem.  Nevertheless, you
-*** may want to report the problem to your system manager and/or to
-*** bug-libtool@gnu.org
 
-EOF
-	  fi ;;
-	esac
-      fi
-      break
-    fi
-  done
-  IFS="$lt_save_ifs"
-  MAGIC_CMD="$lt_save_MAGIC_CMD"
-  ;;
-esac
-fi
 
-MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-if test -n "$MAGIC_CMD"; then
-  { $as_echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5
-$as_echo "$MAGIC_CMD" >&6; }
-else
-  { $as_echo "$as_me:$LINENO: result: no" >&5
-$as_echo "no" >&6; }
-fi
 
-if test -z "$lt_cv_path_MAGIC_CMD"; then
-  if test -n "$ac_tool_prefix"; then
-    { $as_echo "$as_me:$LINENO: checking for file" >&5
-$as_echo_n "checking for file... " >&6; }
-if test "${lt_cv_path_MAGIC_CMD+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
-  case $MAGIC_CMD in
-[\\/*] |  ?:[\\/]*)
-  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
-  ;;
-*)
-  lt_save_MAGIC_CMD="$MAGIC_CMD"
-  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-  ac_dummy="/usr/bin$PATH_SEPARATOR$PATH"
-  for ac_dir in $ac_dummy; do
-    IFS="$lt_save_ifs"
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/file; then
-      lt_cv_path_MAGIC_CMD="$ac_dir/file"
-      if test -n "$file_magic_test_file"; then
-	case $deplibs_check_method in
-	"file_magic "*)
-	  file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
-	  MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-	  if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
-	    $EGREP "$file_magic_regex" > /dev/null; then
-	    :
-	  else
-	    cat <<EOF 1>&2
 
-*** Warning: the command libtool uses to detect shared libraries,
-*** $file_magic_cmd, produces output that libtool cannot recognize.
-*** The result is that libtool may fail to recognize shared libraries
-*** as such.  This will affect the creation of libtool libraries that
-*** depend on shared libraries, but programs linked with such libtool
-*** libraries will work regardless of this problem.  Nevertheless, you
-*** may want to report the problem to your system manager and/or to
-*** bug-libtool@gnu.org
 
-EOF
-	  fi ;;
-	esac
-      fi
-      break
-    fi
-  done
-  IFS="$lt_save_ifs"
-  MAGIC_CMD="$lt_save_MAGIC_CMD"
-  ;;
-esac
-fi
 
-MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-if test -n "$MAGIC_CMD"; then
-  { $as_echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5
-$as_echo "$MAGIC_CMD" >&6; }
-else
-  { $as_echo "$as_me:$LINENO: result: no" >&5
-$as_echo "no" >&6; }
-fi
 
-  else
-    MAGIC_CMD=:
-  fi
-fi
 
-  fi
-  ;;
-esac
 
 
-  case $host_os in
-    rhapsody* | darwin*)
-    if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "${ac_tool_prefix}dsymutil", so it can be a program name with args.
-set dummy ${ac_tool_prefix}dsymutil; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_DSYMUTIL+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$DSYMUTIL"; then
-  ac_cv_prog_DSYMUTIL="$DSYMUTIL" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-    ac_cv_prog_DSYMUTIL="${ac_tool_prefix}dsymutil"
-    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-IFS=$as_save_IFS
 
-fi
-fi
-DSYMUTIL=$ac_cv_prog_DSYMUTIL
-if test -n "$DSYMUTIL"; then
-  { $as_echo "$as_me:$LINENO: result: $DSYMUTIL" >&5
-$as_echo "$DSYMUTIL" >&6; }
-else
-  { $as_echo "$as_me:$LINENO: result: no" >&5
-$as_echo "no" >&6; }
-fi
 
 
-fi
-if test -z "$ac_cv_prog_DSYMUTIL"; then
-  ac_ct_DSYMUTIL=$DSYMUTIL
-  # Extract the first word of "dsymutil", so it can be a program name with args.
-set dummy dsymutil; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_ac_ct_DSYMUTIL+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$ac_ct_DSYMUTIL"; then
-  ac_cv_prog_ac_ct_DSYMUTIL="$ac_ct_DSYMUTIL" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-    ac_cv_prog_ac_ct_DSYMUTIL="dsymutil"
-    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-IFS=$as_save_IFS
 
-fi
-fi
-ac_ct_DSYMUTIL=$ac_cv_prog_ac_ct_DSYMUTIL
-if test -n "$ac_ct_DSYMUTIL"; then
-  { $as_echo "$as_me:$LINENO: result: $ac_ct_DSYMUTIL" >&5
-$as_echo "$ac_ct_DSYMUTIL" >&6; }
-else
-  { $as_echo "$as_me:$LINENO: result: no" >&5
-$as_echo "no" >&6; }
-fi
 
-  if test "x$ac_ct_DSYMUTIL" = x; then
-    DSYMUTIL=":"
-  else
-    case $cross_compiling:$ac_tool_warned in
-yes:)
-{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5
-$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
-ac_tool_warned=yes ;;
-esac
-    DSYMUTIL=$ac_ct_DSYMUTIL
-  fi
-else
-  DSYMUTIL="$ac_cv_prog_DSYMUTIL"
-fi
 
-    if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "${ac_tool_prefix}nmedit", so it can be a program name with args.
-set dummy ${ac_tool_prefix}nmedit; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_NMEDIT+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$NMEDIT"; then
-  ac_cv_prog_NMEDIT="$NMEDIT" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-    ac_cv_prog_NMEDIT="${ac_tool_prefix}nmedit"
-    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-IFS=$as_save_IFS
 
-fi
-fi
-NMEDIT=$ac_cv_prog_NMEDIT
-if test -n "$NMEDIT"; then
-  { $as_echo "$as_me:$LINENO: result: $NMEDIT" >&5
-$as_echo "$NMEDIT" >&6; }
-else
-  { $as_echo "$as_me:$LINENO: result: no" >&5
-$as_echo "no" >&6; }
-fi
 
 
-fi
-if test -z "$ac_cv_prog_NMEDIT"; then
-  ac_ct_NMEDIT=$NMEDIT
-  # Extract the first word of "nmedit", so it can be a program name with args.
-set dummy nmedit; ac_word=$2
-{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if test "${ac_cv_prog_ac_ct_NMEDIT+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
-  if test -n "$ac_ct_NMEDIT"; then
-  ac_cv_prog_ac_ct_NMEDIT="$ac_ct_NMEDIT" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
-    ac_cv_prog_ac_ct_NMEDIT="nmedit"
-    $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-IFS=$as_save_IFS
 
-fi
-fi
-ac_ct_NMEDIT=$ac_cv_prog_ac_ct_NMEDIT
-if test -n "$ac_ct_NMEDIT"; then
-  { $as_echo "$as_me:$LINENO: result: $ac_ct_NMEDIT" >&5
-$as_echo "$ac_ct_NMEDIT" >&6; }
-else
-  { $as_echo "$as_me:$LINENO: result: no" >&5
-$as_echo "no" >&6; }
-fi
 
-  if test "x$ac_ct_NMEDIT" = x; then
-    NMEDIT=":"
-  else
-    case $cross_compiling:$ac_tool_warned in
-yes:)
-{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5
-$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
-ac_tool_warned=yes ;;
-esac
-    NMEDIT=$ac_ct_NMEDIT
-  fi
-else
-  NMEDIT="$ac_cv_prog_NMEDIT"
-fi
 
 
-    { $as_echo "$as_me:$LINENO: checking for -single_module linker flag" >&5
-$as_echo_n "checking for -single_module linker flag... " >&6; }
-if test "${lt_cv_apple_cc_single_mod+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
-  lt_cv_apple_cc_single_mod=no
-      if test -z "${LT_MULTI_MODULE}"; then
-   # By default we will add the -single_module flag. You can override
-   # by either setting the environment variable LT_MULTI_MODULE
-   # non-empty at configure time, or by adding -multi_module to the
-   # link flags.
-   echo "int foo(void){return 1;}" > conftest.c
-   $LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
-     -dynamiclib ${wl}-single_module conftest.c
-   if test -f libconftest.dylib; then
-     lt_cv_apple_cc_single_mod=yes
-     rm -rf libconftest.dylib*
-   fi
-   rm conftest.c
-      fi
-fi
-{ $as_echo "$as_me:$LINENO: result: $lt_cv_apple_cc_single_mod" >&5
-$as_echo "$lt_cv_apple_cc_single_mod" >&6; }
-    { $as_echo "$as_me:$LINENO: checking for -exported_symbols_list linker flag" >&5
-$as_echo_n "checking for -exported_symbols_list linker flag... " >&6; }
-if test "${lt_cv_ld_exported_symbols_list+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
-  lt_cv_ld_exported_symbols_list=no
-      save_LDFLAGS=$LDFLAGS
-      echo "_main" > conftest.sym
-      LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym"
-      cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
 
-int
-main ()
-{
 
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_link") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest$ac_exeext && {
-	 test "$cross_compiling" = yes ||
-	 $as_test_x conftest$ac_exeext
-       }; then
-  lt_cv_ld_exported_symbols_list=yes
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
 
-	lt_cv_ld_exported_symbols_list=no
-fi
 
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-      conftest$ac_exeext conftest.$ac_ext
-   LDFLAGS="$save_LDFLAGS"
 
-fi
-{ $as_echo "$as_me:$LINENO: result: $lt_cv_ld_exported_symbols_list" >&5
-$as_echo "$lt_cv_ld_exported_symbols_list" >&6; }
-    case $host_os in
-    rhapsody* | darwin1.[0123])
-      _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;;
-    darwin1.*)
-     _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
-    darwin*)
-      # if running on 10.5 or later, the deployment target defaults
-      # to the OS version, if on x86, and 10.4, the deployment
-      # target defaults to 10.4. Don't you love it?
-      case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in
-   10.0,*86*-darwin8*|10.0,*-darwin[91]*)
-     _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
-   10.[012]*)
-     _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
-   10.*)
-     _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
-      esac
-    ;;
-  esac
-    if test "$lt_cv_apple_cc_single_mod" = "yes"; then
-      _lt_dar_single_mod='$single_module'
-    fi
-    if test "$lt_cv_ld_exported_symbols_list" = "yes"; then
-      _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym'
-    else
-      _lt_dar_export_syms="~$NMEDIT -s \$output_objdir/\${libname}-symbols.expsym \${lib}"
-    fi
-    if test "$DSYMUTIL" != ":"; then
-      _lt_dsymutil="~$DSYMUTIL \$lib || :"
-    else
-      _lt_dsymutil=
-    fi
-    ;;
-  esac
 
 
-enable_dlopen=no
-enable_win32_dll=yes
+# If no C compiler was specified, use CC.
+LTCC=${LTCC-"$CC"}
 
-# Check whether --enable-libtool-lock was given.
-if test "${enable_libtool_lock+set}" = set; then
-  enableval=$enable_libtool_lock;
-fi
+# If no C compiler flags were specified, use CFLAGS.
+LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
 
-test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
+# Allow CC to be a program name with arguments.
+compiler=$CC
 
 
-# Check whether --with-pic was given.
-if test "${with_pic+set}" = set; then
-  withval=$with_pic; pic_mode="$withval"
+# Check for command to grab the raw symbol name followed by C symbol from nm.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking command to parse $NM output from $compiler object" >&5
+$as_echo_n "checking command to parse $NM output from $compiler object... " >&6; }
+if test "${lt_cv_sys_global_symbol_pipe+set}" = set; then :
+  $as_echo_n "(cached) " >&6
 else
-  pic_mode=default
-fi
 
-test -z "$pic_mode" && pic_mode=default
+# These are sane defaults that work on at least a few old systems.
+# [They come from Ultrix.  What could be older than Ultrix?!! ;)]
 
-# Use C for the default configuration in the libtool script
-tagname=
-lt_save_CC="$CC"
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
+# Character class describing NM global symbol codes.
+symcode='[BCDEGRST]'
 
+# Regexp to match symbols that can be accessed directly from C.
+sympat='\([_A-Za-z][_A-Za-z0-9]*\)'
 
-# Source file extension for C test sources.
-ac_ext=c
+# Define system-specific variables.
+case $host_os in
+aix*)
+  symcode='[BCDT]'
+  ;;
+cygwin* | mingw* | pw32* | cegcc*)
+  symcode='[ABCDGISTW]'
+  ;;
+hpux*)
+  if test "$host_cpu" = ia64; then
+    symcode='[ABCDEGRST]'
+  fi
+  ;;
+irix* | nonstopux*)
+  symcode='[BCDEGRST]'
+  ;;
+osf*)
+  symcode='[BCDEGQRST]'
+  ;;
+solaris*)
+  symcode='[BDRT]'
+  ;;
+sco3.2v5*)
+  symcode='[DT]'
+  ;;
+sysv4.2uw2*)
+  symcode='[DT]'
+  ;;
+sysv5* | sco5v6* | unixware* | OpenUNIX*)
+  symcode='[ABDT]'
+  ;;
+sysv4)
+  symcode='[DFNSTU]'
+  ;;
+esac
 
-# Object file extension for compiled C test sources.
-objext=o
-objext=$objext
+# If we're using GNU nm, then use its standard symbol codes.
+case `$NM -V 2>&1` in
+*GNU* | *'with BFD'*)
+  symcode='[ABCDGIRSTW]' ;;
+esac
 
-# Code to be used in simple compile tests
-lt_simple_compile_test_code="int some_variable = 0;"
+# Transform an extracted symbol line into a proper C declaration.
+# Some systems (esp. on ia64) link data and code symbols differently,
+# so use this general approach.
+lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
 
-# Code to be used in simple link tests
-lt_simple_link_test_code='int main(){return(0);}'
+# Transform an extracted symbol line into symbol name and symbol address
+lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/  {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/  {\"\2\", (void *) \&\2},/p'"
+lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([^ ]*\) $/  {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \(lib[^ ]*\)$/  {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/  {\"lib\2\", (void *) \&\2},/p'"
 
+# Handle CRLF in mingw tool chain
+opt_cr=
+case $build_os in
+mingw*)
+  opt_cr=`$ECHO 'x\{0,1\}' | tr x '\015'` # option cr in regexp
+  ;;
+esac
 
-# If no C compiler was specified, use CC.
-LTCC=${LTCC-"$CC"}
+# Try without a prefix underscore, then with it.
+for ac_symprfx in "" "_"; do
 
-# If no C compiler flags were specified, use CFLAGS.
-LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
+  # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol.
+  symxfrm="\\1 $ac_symprfx\\2 \\2"
 
-# Allow CC to be a program name with arguments.
-compiler=$CC
+  # Write the raw and C identifiers.
+  if test "$lt_cv_nm_interface" = "MS dumpbin"; then
+    # Fake it for dumpbin and say T for any non-static function
+    # and D for any global variable.
+    # Also find C++ and __fastcall symbols from MSVC++,
+    # which start with @ or ?.
+    lt_cv_sys_global_symbol_pipe="$AWK '"\
+"     {last_section=section; section=\$ 3};"\
+"     /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\
+"     \$ 0!~/External *\|/{next};"\
+"     / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\
+"     {if(hide[section]) next};"\
+"     {f=0}; \$ 0~/\(\).*\|/{f=1}; {printf f ? \"T \" : \"D \"};"\
+"     {split(\$ 0, a, /\||\r/); split(a[2], s)};"\
+"     s[1]~/^[@?]/{print s[1], s[1]; next};"\
+"     s[1]~prfx {split(s[1],t,\"@\"); print t[1], substr(t[1],length(prfx))}"\
+"     ' prfx=^$ac_symprfx"
+  else
+    lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[	 ]\($symcode$symcode*\)[	 ][	 ]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'"
+  fi
 
+  # Check to see that the pipe works correctly.
+  pipe_works=no
 
-# save warnings/boilerplate of simple test code
-ac_outfile=conftest.$ac_objext
-echo "$lt_simple_compile_test_code" >conftest.$ac_ext
-eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
-_lt_compiler_boilerplate=`cat conftest.err`
-$rm conftest*
+  rm -f conftest*
+  cat > conftest.$ac_ext <<_LT_EOF
+#ifdef __cplusplus
+extern "C" {
+#endif
+char nm_test_var;
+void nm_test_func(void);
+void nm_test_func(void){}
+#ifdef __cplusplus
+}
+#endif
+int main(){nm_test_var='a';nm_test_func();return(0);}
+_LT_EOF
 
-ac_outfile=conftest.$ac_objext
-echo "$lt_simple_link_test_code" >conftest.$ac_ext
-eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
-_lt_linker_boilerplate=`cat conftest.err`
-$rm -r conftest*
+  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
+    # Now try to grab the symbols.
+    nlist=conftest.nm
+    if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist\""; } >&5
+  (eval $NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } && test -s "$nlist"; then
+      # Try sorting and uniquifying the output.
+      if sort "$nlist" | uniq > "$nlist"T; then
+	mv -f "$nlist"T "$nlist"
+      else
+	rm -f "$nlist"T
+      fi
 
+      # Make sure that we snagged all the symbols we need.
+      if $GREP ' nm_test_var$' "$nlist" >/dev/null; then
+	if $GREP ' nm_test_func$' "$nlist" >/dev/null; then
+	  cat <<_LT_EOF > conftest.$ac_ext
+#ifdef __cplusplus
+extern "C" {
+#endif
 
+_LT_EOF
+	  # Now generate the symbol file.
+	  eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | $GREP -v main >> conftest.$ac_ext'
 
-lt_prog_compiler_no_builtin_flag=
+	  cat <<_LT_EOF >> conftest.$ac_ext
 
-if test "$GCC" = yes; then
-  lt_prog_compiler_no_builtin_flag=' -fno-builtin'
+/* The mapping between symbol names and symbols.  */
+const struct {
+  const char *name;
+  void       *address;
+}
+lt__PROGRAM__LTX_preloaded_symbols[] =
+{
+  { "@PROGRAM@", (void *) 0 },
+_LT_EOF
+	  $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/  {\"\2\", (void *) \&\2},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext
+	  cat <<\_LT_EOF >> conftest.$ac_ext
+  {0, (void *) 0}
+};
 
+/* This works around a problem in FreeBSD linker */
+#ifdef FREEBSD_WORKAROUND
+static const void *lt_preloaded_setup() {
+  return lt__PROGRAM__LTX_preloaded_symbols;
+}
+#endif
 
-{ $as_echo "$as_me:$LINENO: checking if $compiler supports -fno-rtti -fno-exceptions" >&5
-$as_echo_n "checking if $compiler supports -fno-rtti -fno-exceptions... " >&6; }
-if test "${lt_cv_prog_compiler_rtti_exceptions+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
-  lt_cv_prog_compiler_rtti_exceptions=no
-  ac_outfile=conftest.$ac_objext
-   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
-   lt_compiler_flag="-fno-rtti -fno-exceptions"
-   # Insert the option either (1) after the last *FLAGS variable, or
-   # (2) before a word containing "conftest.", or (3) at the end.
-   # Note that $ac_compile itself does not contain backslashes and begins
-   # with a dollar sign (not a hyphen), so the echo should work correctly.
-   # The option is referenced via a variable to avoid confusing sed.
-   lt_compile=`echo "$ac_compile" | $SED \
-   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-   -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:9254: $lt_compile\"" >&5)
-   (eval "$lt_compile" 2>conftest.err)
-   ac_status=$?
-   cat conftest.err >&5
-   echo "$as_me:9258: \$? = $ac_status" >&5
-   if (exit $ac_status) && test -s "$ac_outfile"; then
-     # The compiler can only warn and ignore the option if not recognized
-     # So say no if there are warnings other than the usual output.
-     $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
-     $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
-     if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
-       lt_cv_prog_compiler_rtti_exceptions=yes
-     fi
-   fi
-   $rm conftest*
+#ifdef __cplusplus
+}
+#endif
+_LT_EOF
+	  # Now try linking the two files.
+	  mv conftest.$ac_objext conftstm.$ac_objext
+	  lt_save_LIBS="$LIBS"
+	  lt_save_CFLAGS="$CFLAGS"
+	  LIBS="conftstm.$ac_objext"
+	  CFLAGS="$CFLAGS$lt_prog_compiler_no_builtin_flag"
+	  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5
+  (eval $ac_link) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } && test -s conftest${ac_exeext}; then
+	    pipe_works=yes
+	  fi
+	  LIBS="$lt_save_LIBS"
+	  CFLAGS="$lt_save_CFLAGS"
+	else
+	  echo "cannot find nm_test_func in $nlist" >&5
+	fi
+      else
+	echo "cannot find nm_test_var in $nlist" >&5
+      fi
+    else
+      echo "cannot run $lt_cv_sys_global_symbol_pipe" >&5
+    fi
+  else
+    echo "$progname: failed program was:" >&5
+    cat conftest.$ac_ext >&5
+  fi
+  rm -rf conftest* conftst*
+
+  # Do not use the global_symbol_pipe unless it works.
+  if test "$pipe_works" = yes; then
+    break
+  else
+    lt_cv_sys_global_symbol_pipe=
+  fi
+done
 
 fi
-{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_rtti_exceptions" >&5
-$as_echo "$lt_cv_prog_compiler_rtti_exceptions" >&6; }
 
-if test x"$lt_cv_prog_compiler_rtti_exceptions" = xyes; then
-    lt_prog_compiler_no_builtin_flag="$lt_prog_compiler_no_builtin_flag -fno-rtti -fno-exceptions"
+if test -z "$lt_cv_sys_global_symbol_pipe"; then
+  lt_cv_sys_global_symbol_to_cdecl=
+fi
+if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: failed" >&5
+$as_echo "failed" >&6; }
 else
-    :
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: ok" >&5
+$as_echo "ok" >&6; }
 fi
 
-fi
 
-lt_prog_compiler_wl=
-lt_prog_compiler_pic=
-lt_prog_compiler_static=
 
-{ $as_echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5
-$as_echo_n "checking for $compiler option to produce PIC... " >&6; }
 
-  if test "$GCC" = yes; then
-    lt_prog_compiler_wl='-Wl,'
-    lt_prog_compiler_static='-static'
 
-    case $host_os in
-      aix*)
-      # All AIX code is PIC.
-      if test "$host_cpu" = ia64; then
-	# AIX 5 now supports IA64 processor
-	lt_prog_compiler_static='-Bstatic'
-      fi
-      ;;
 
-    amigaos*)
-      # FIXME: we need at least 68020 code to build shared libraries, but
-      # adding the `-m68020' flag to GCC prevents building anything better,
-      # like `-m68040'.
-      lt_prog_compiler_pic='-m68020 -resident32 -malways-restore-a4'
-      ;;
 
-    beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
-      # PIC is the default for these OSes.
-      ;;
 
-    mingw* | cygwin* | pw32* | os2*)
-      # This hack is so that the source file can tell whether it is being
-      # built for inclusion in a dll (and should export symbols for example).
-      # Although the cygwin gcc ignores -fPIC, still need this for old-style
-      # (--disable-auto-import) libraries
-      lt_prog_compiler_pic='-DDLL_EXPORT'
-      ;;
 
-    darwin* | rhapsody*)
-      # PIC is the default on this platform
-      # Common symbols not allowed in MH_DYLIB files
-      lt_prog_compiler_pic='-fno-common'
-      ;;
 
-    interix[3-9]*)
-      # Interix 3.x gcc -fpic/-fPIC options generate broken code.
-      # Instead, we relocate shared libraries at runtime.
-      ;;
 
-    msdosdjgpp*)
-      # Just because we use GCC doesn't mean we suddenly get shared libraries
-      # on systems that don't support them.
-      lt_prog_compiler_can_build_shared=no
-      enable_shared=no
-      ;;
 
-    sysv4*MP*)
-      if test -d /usr/nec; then
-	lt_prog_compiler_pic=-Kconform_pic
-      fi
-      ;;
 
-    hpux*)
-      # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
-      # not for PA HP-UX.
-      case $host_cpu in
-      hppa*64*|ia64*)
-	# +Z the default
-	;;
-      *)
-	lt_prog_compiler_pic='-fPIC'
-	;;
-      esac
-      ;;
 
-    *)
-      lt_prog_compiler_pic='-fPIC'
-      ;;
-    esac
-  else
-    # PORTME Check for flag to pass linker flags through the system compiler.
-    case $host_os in
-    aix*)
-      lt_prog_compiler_wl='-Wl,'
-      if test "$host_cpu" = ia64; then
-	# AIX 5 now supports IA64 processor
-	lt_prog_compiler_static='-Bstatic'
-      else
-	lt_prog_compiler_static='-bnso -bI:/lib/syscalls.exp'
-      fi
-      ;;
-      darwin*)
-        # PIC is the default on this platform
-        # Common symbols not allowed in MH_DYLIB files
-       case $cc_basename in
-         xlc*)
-         lt_prog_compiler_pic='-qnocommon'
-         lt_prog_compiler_wl='-Wl,'
-         ;;
-       esac
-       ;;
 
-    mingw* | cygwin* | pw32* | os2*)
-      # This hack is so that the source file can tell whether it is being
-      # built for inclusion in a dll (and should export symbols for example).
-      lt_prog_compiler_pic='-DDLL_EXPORT'
-      ;;
 
-    hpux9* | hpux10* | hpux11*)
-      lt_prog_compiler_wl='-Wl,'
-      # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
-      # not for PA HP-UX.
-      case $host_cpu in
-      hppa*64*|ia64*)
-	# +Z the default
-	;;
-      *)
-	lt_prog_compiler_pic='+Z'
-	;;
-      esac
-      # Is there a better lt_prog_compiler_static that works with the bundled CC?
-      lt_prog_compiler_static='${wl}-a ${wl}archive'
-      ;;
 
-    irix5* | irix6* | nonstopux*)
-      lt_prog_compiler_wl='-Wl,'
-      # PIC (with -KPIC) is the default.
-      lt_prog_compiler_static='-non_shared'
-      ;;
 
-    newsos6)
-      lt_prog_compiler_pic='-KPIC'
-      lt_prog_compiler_static='-Bstatic'
-      ;;
 
-    linux* | k*bsd*-gnu)
-      case $cc_basename in
-      icc* | ecc*)
-	lt_prog_compiler_wl='-Wl,'
-	lt_prog_compiler_pic='-KPIC'
-	lt_prog_compiler_static='-static'
-        ;;
-      pgcc* | pgf77* | pgf90* | pgf95*)
-        # Portland Group compilers (*not* the Pentium gcc compiler,
-	# which looks to be a dead project)
-	lt_prog_compiler_wl='-Wl,'
-	lt_prog_compiler_pic='-fpic'
-	lt_prog_compiler_static='-Bstatic'
-        ;;
-      ccc*)
-        lt_prog_compiler_wl='-Wl,'
-        # All Alpha code is PIC.
-        lt_prog_compiler_static='-non_shared'
-        ;;
-      *)
-        case `$CC -V 2>&1 | sed 5q` in
-	*Sun\ C*)
-	  # Sun C 5.9
-	  lt_prog_compiler_pic='-KPIC'
-	  lt_prog_compiler_static='-Bstatic'
-	  lt_prog_compiler_wl='-Wl,'
+
+
+
+# Check whether --enable-libtool-lock was given.
+if test "${enable_libtool_lock+set}" = set; then :
+  enableval=$enable_libtool_lock;
+fi
+
+test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
+
+# Some flags need to be propagated to the compiler or linker for good
+# libtool support.
+case $host in
+ia64-*-hpux*)
+  # Find out which ABI we are using.
+  echo 'int i;' > conftest.$ac_ext
+  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
+    case `/usr/bin/file conftest.$ac_objext` in
+      *ELF-32*)
+	HPUX_IA64_MODE="32"
+	;;
+      *ELF-64*)
+	HPUX_IA64_MODE="64"
+	;;
+    esac
+  fi
+  rm -rf conftest*
+  ;;
+*-*-irix6*)
+  # Find out which ABI we are using.
+  echo '#line 7843 "configure"' > conftest.$ac_ext
+  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
+    if test "$lt_cv_prog_gnu_ld" = yes; then
+      case `/usr/bin/file conftest.$ac_objext` in
+	*32-bit*)
+	  LD="${LD-ld} -melf32bsmip"
 	  ;;
-	*Sun\ F*)
-	  # Sun Fortran 8.3 passes all unrecognized flags to the linker
-	  lt_prog_compiler_pic='-KPIC'
-	  lt_prog_compiler_static='-Bstatic'
-	  lt_prog_compiler_wl=''
+	*N32*)
+	  LD="${LD-ld} -melf32bmipn32"
 	  ;;
-	esac
+	*64-bit*)
+	  LD="${LD-ld} -melf64bmip"
 	;;
       esac
-      ;;
-
-    osf3* | osf4* | osf5*)
-      lt_prog_compiler_wl='-Wl,'
-      # All OSF/1 code is PIC.
-      lt_prog_compiler_static='-non_shared'
-      ;;
-
-    rdos*)
-      lt_prog_compiler_static='-non_shared'
-      ;;
-
-    solaris*)
-      lt_prog_compiler_pic='-KPIC'
-      lt_prog_compiler_static='-Bstatic'
-      case $cc_basename in
-      f77* | f90* | f95*)
-	lt_prog_compiler_wl='-Qoption ld ';;
-      *)
-	lt_prog_compiler_wl='-Wl,';;
+    else
+      case `/usr/bin/file conftest.$ac_objext` in
+	*32-bit*)
+	  LD="${LD-ld} -32"
+	  ;;
+	*N32*)
+	  LD="${LD-ld} -n32"
+	  ;;
+	*64-bit*)
+	  LD="${LD-ld} -64"
+	  ;;
       esac
-      ;;
-
-    sunos4*)
-      lt_prog_compiler_wl='-Qoption ld '
-      lt_prog_compiler_pic='-PIC'
-      lt_prog_compiler_static='-Bstatic'
-      ;;
+    fi
+  fi
+  rm -rf conftest*
+  ;;
 
-    sysv4 | sysv4.2uw2* | sysv4.3*)
-      lt_prog_compiler_wl='-Wl,'
-      lt_prog_compiler_pic='-KPIC'
-      lt_prog_compiler_static='-Bstatic'
-      ;;
+x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \
+s390*-*linux*|s390*-*tpf*|sparc*-*linux*)
+  # Find out which ABI we are using.
+  echo 'int i;' > conftest.$ac_ext
+  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
+    case `/usr/bin/file conftest.o` in
+      *32-bit*)
+	case $host in
+	  x86_64-*kfreebsd*-gnu)
+	    LD="${LD-ld} -m elf_i386_fbsd"
+	    ;;
+	  x86_64-*linux*)
+	    LD="${LD-ld} -m elf_i386"
+	    ;;
+	  ppc64-*linux*|powerpc64-*linux*)
+	    LD="${LD-ld} -m elf32ppclinux"
+	    ;;
+	  s390x-*linux*)
+	    LD="${LD-ld} -m elf_s390"
+	    ;;
+	  sparc64-*linux*)
+	    LD="${LD-ld} -m elf32_sparc"
+	    ;;
+	esac
+	;;
+      *64-bit*)
+	case $host in
+	  x86_64-*kfreebsd*-gnu)
+	    LD="${LD-ld} -m elf_x86_64_fbsd"
+	    ;;
+	  x86_64-*linux*)
+	    LD="${LD-ld} -m elf_x86_64"
+	    ;;
+	  ppc*-*linux*|powerpc*-*linux*)
+	    LD="${LD-ld} -m elf64ppc"
+	    ;;
+	  s390*-*linux*|s390*-*tpf*)
+	    LD="${LD-ld} -m elf64_s390"
+	    ;;
+	  sparc*-*linux*)
+	    LD="${LD-ld} -m elf64_sparc"
+	    ;;
+	esac
+	;;
+    esac
+  fi
+  rm -rf conftest*
+  ;;
 
-    sysv4*MP*)
-      if test -d /usr/nec ;then
-	lt_prog_compiler_pic='-Kconform_pic'
-	lt_prog_compiler_static='-Bstatic'
-      fi
-      ;;
+*-*-sco3.2v5*)
+  # On SCO OpenServer 5, we need -belf to get full-featured binaries.
+  SAVE_CFLAGS="$CFLAGS"
+  CFLAGS="$CFLAGS -belf"
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler needs -belf" >&5
+$as_echo_n "checking whether the C compiler needs -belf... " >&6; }
+if test "${lt_cv_cc_needs_belf+set}" = set; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
 
-    sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
-      lt_prog_compiler_wl='-Wl,'
-      lt_prog_compiler_pic='-KPIC'
-      lt_prog_compiler_static='-Bstatic'
-      ;;
+     cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
 
-    unicos*)
-      lt_prog_compiler_wl='-Wl,'
-      lt_prog_compiler_can_build_shared=no
-      ;;
+int
+main ()
+{
 
-    uts4*)
-      lt_prog_compiler_pic='-pic'
-      lt_prog_compiler_static='-Bstatic'
-      ;;
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  lt_cv_cc_needs_belf=yes
+else
+  lt_cv_cc_needs_belf=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+     ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
 
-    *)
-      lt_prog_compiler_can_build_shared=no
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_cc_needs_belf" >&5
+$as_echo "$lt_cv_cc_needs_belf" >&6; }
+  if test x"$lt_cv_cc_needs_belf" != x"yes"; then
+    # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
+    CFLAGS="$SAVE_CFLAGS"
+  fi
+  ;;
+sparc*-*solaris*)
+  # Find out which ABI we are using.
+  echo 'int i;' > conftest.$ac_ext
+  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
+    case `/usr/bin/file conftest.o` in
+    *64-bit*)
+      case $lt_cv_prog_gnu_ld in
+      yes*) LD="${LD-ld} -m elf64_sparc" ;;
+      *)
+	if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then
+	  LD="${LD-ld} -64"
+	fi
+	;;
+      esac
       ;;
     esac
   fi
+  rm -rf conftest*
+  ;;
+esac
 
-{ $as_echo "$as_me:$LINENO: result: $lt_prog_compiler_pic" >&5
-$as_echo "$lt_prog_compiler_pic" >&6; }
+need_locks="$enable_libtool_lock"
 
-#
-# Check to make sure the PIC flag actually works.
-#
-if test -n "$lt_prog_compiler_pic"; then
 
-{ $as_echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic works" >&5
-$as_echo_n "checking if $compiler PIC flag $lt_prog_compiler_pic works... " >&6; }
-if test "${lt_cv_prog_compiler_pic_works+set}" = set; then
+  case $host_os in
+    rhapsody* | darwin*)
+    if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}dsymutil", so it can be a program name with args.
+set dummy ${ac_tool_prefix}dsymutil; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_DSYMUTIL+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
-  lt_cv_prog_compiler_pic_works=no
-  ac_outfile=conftest.$ac_objext
-   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
-   lt_compiler_flag="$lt_prog_compiler_pic -DPIC"
-   # Insert the option either (1) after the last *FLAGS variable, or
-   # (2) before a word containing "conftest.", or (3) at the end.
-   # Note that $ac_compile itself does not contain backslashes and begins
-   # with a dollar sign (not a hyphen), so the echo should work correctly.
-   # The option is referenced via a variable to avoid confusing sed.
-   lt_compile=`echo "$ac_compile" | $SED \
-   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-   -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:9544: $lt_compile\"" >&5)
-   (eval "$lt_compile" 2>conftest.err)
-   ac_status=$?
-   cat conftest.err >&5
-   echo "$as_me:9548: \$? = $ac_status" >&5
-   if (exit $ac_status) && test -s "$ac_outfile"; then
-     # The compiler can only warn and ignore the option if not recognized
-     # So say no if there are warnings other than the usual output.
-     $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
-     $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
-     if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
-       lt_cv_prog_compiler_pic_works=yes
-     fi
-   fi
-   $rm conftest*
+  if test -n "$DSYMUTIL"; then
+  ac_cv_prog_DSYMUTIL="$DSYMUTIL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_DSYMUTIL="${ac_tool_prefix}dsymutil"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
 
 fi
-{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_pic_works" >&5
-$as_echo "$lt_cv_prog_compiler_pic_works" >&6; }
-
-if test x"$lt_cv_prog_compiler_pic_works" = xyes; then
-    case $lt_prog_compiler_pic in
-     "" | " "*) ;;
-     *) lt_prog_compiler_pic=" $lt_prog_compiler_pic" ;;
-     esac
+fi
+DSYMUTIL=$ac_cv_prog_DSYMUTIL
+if test -n "$DSYMUTIL"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DSYMUTIL" >&5
+$as_echo "$DSYMUTIL" >&6; }
 else
-    lt_prog_compiler_pic=
-     lt_prog_compiler_can_build_shared=no
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
 fi
 
-fi
-case $host_os in
-  # For platforms which do not support PIC, -DPIC is meaningless:
-  *djgpp*)
-    lt_prog_compiler_pic=
-    ;;
-  *)
-    lt_prog_compiler_pic="$lt_prog_compiler_pic -DPIC"
-    ;;
-esac
 
-#
-# Check to make sure the static flag actually works.
-#
-wl=$lt_prog_compiler_wl eval lt_tmp_static_flag=\"$lt_prog_compiler_static\"
-{ $as_echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5
-$as_echo_n "checking if $compiler static flag $lt_tmp_static_flag works... " >&6; }
-if test "${lt_cv_prog_compiler_static_works+set}" = set; then
+fi
+if test -z "$ac_cv_prog_DSYMUTIL"; then
+  ac_ct_DSYMUTIL=$DSYMUTIL
+  # Extract the first word of "dsymutil", so it can be a program name with args.
+set dummy dsymutil; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_ac_ct_DSYMUTIL+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
-  lt_cv_prog_compiler_static_works=no
-   save_LDFLAGS="$LDFLAGS"
-   LDFLAGS="$LDFLAGS $lt_tmp_static_flag"
-   echo "$lt_simple_link_test_code" > conftest.$ac_ext
-   if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
-     # The linker can only warn and ignore the option if not recognized
-     # So say no if there are warnings
-     if test -s conftest.err; then
-       # Append any errors to the config.log.
-       cat conftest.err 1>&5
-       $echo "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp
-       $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
-       if diff conftest.exp conftest.er2 >/dev/null; then
-         lt_cv_prog_compiler_static_works=yes
-       fi
-     else
-       lt_cv_prog_compiler_static_works=yes
-     fi
-   fi
-   $rm -r conftest*
-   LDFLAGS="$save_LDFLAGS"
+  if test -n "$ac_ct_DSYMUTIL"; then
+  ac_cv_prog_ac_ct_DSYMUTIL="$ac_ct_DSYMUTIL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_DSYMUTIL="dsymutil"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
 
 fi
-{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_static_works" >&5
-$as_echo "$lt_cv_prog_compiler_static_works" >&6; }
-
-if test x"$lt_cv_prog_compiler_static_works" = xyes; then
-    :
+fi
+ac_ct_DSYMUTIL=$ac_cv_prog_ac_ct_DSYMUTIL
+if test -n "$ac_ct_DSYMUTIL"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DSYMUTIL" >&5
+$as_echo "$ac_ct_DSYMUTIL" >&6; }
 else
-    lt_prog_compiler_static=
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
 fi
 
+  if test "x$ac_ct_DSYMUTIL" = x; then
+    DSYMUTIL=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    DSYMUTIL=$ac_ct_DSYMUTIL
+  fi
+else
+  DSYMUTIL="$ac_cv_prog_DSYMUTIL"
+fi
 
-{ $as_echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5
-$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; }
-if test "${lt_cv_prog_compiler_c_o+set}" = set; then
+    if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}nmedit", so it can be a program name with args.
+set dummy ${ac_tool_prefix}nmedit; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_NMEDIT+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
-  lt_cv_prog_compiler_c_o=no
-   $rm -r conftest 2>/dev/null
-   mkdir conftest
-   cd conftest
-   mkdir out
-   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
-
-   lt_compiler_flag="-o out/conftest2.$ac_objext"
-   # Insert the option either (1) after the last *FLAGS variable, or
-   # (2) before a word containing "conftest.", or (3) at the end.
-   # Note that $ac_compile itself does not contain backslashes and begins
-   # with a dollar sign (not a hyphen), so the echo should work correctly.
-   lt_compile=`echo "$ac_compile" | $SED \
-   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-   -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:9648: $lt_compile\"" >&5)
-   (eval "$lt_compile" 2>out/conftest.err)
-   ac_status=$?
-   cat out/conftest.err >&5
-   echo "$as_me:9652: \$? = $ac_status" >&5
-   if (exit $ac_status) && test -s out/conftest2.$ac_objext
-   then
-     # The compiler can only warn and ignore the option if not recognized
-     # So say no if there are warnings
-     $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
-     $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
-     if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
-       lt_cv_prog_compiler_c_o=yes
-     fi
-   fi
-   chmod u+w . 2>&5
-   $rm conftest*
-   # SGI C++ compiler will create directory out/ii_files/ for
-   # template instantiation
-   test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files
-   $rm out/* && rmdir out
-   cd ..
-   rmdir conftest
-   $rm conftest*
+  if test -n "$NMEDIT"; then
+  ac_cv_prog_NMEDIT="$NMEDIT" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_NMEDIT="${ac_tool_prefix}nmedit"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
 
 fi
-{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o" >&5
-$as_echo "$lt_cv_prog_compiler_c_o" >&6; }
+fi
+NMEDIT=$ac_cv_prog_NMEDIT
+if test -n "$NMEDIT"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $NMEDIT" >&5
+$as_echo "$NMEDIT" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
 
 
-hard_links="nottested"
-if test "$lt_cv_prog_compiler_c_o" = no && test "$need_locks" != no; then
-  # do not overwrite the value of need_locks provided by the user
-  { $as_echo "$as_me:$LINENO: checking if we can lock with hard links" >&5
-$as_echo_n "checking if we can lock with hard links... " >&6; }
-  hard_links=yes
-  $rm conftest*
-  ln conftest.a conftest.b 2>/dev/null && hard_links=no
-  touch conftest.a
-  ln conftest.a conftest.b 2>&5 || hard_links=no
-  ln conftest.a conftest.b 2>/dev/null && hard_links=no
-  { $as_echo "$as_me:$LINENO: result: $hard_links" >&5
-$as_echo "$hard_links" >&6; }
-  if test "$hard_links" = no; then
-    { $as_echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5
-$as_echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;}
-    need_locks=warn
+fi
+if test -z "$ac_cv_prog_NMEDIT"; then
+  ac_ct_NMEDIT=$NMEDIT
+  # Extract the first word of "nmedit", so it can be a program name with args.
+set dummy nmedit; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_ac_ct_NMEDIT+set}" = set; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_NMEDIT"; then
+  ac_cv_prog_ac_ct_NMEDIT="$ac_ct_NMEDIT" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_NMEDIT="nmedit"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
   fi
+done
+  done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_NMEDIT=$ac_cv_prog_ac_ct_NMEDIT
+if test -n "$ac_ct_NMEDIT"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_NMEDIT" >&5
+$as_echo "$ac_ct_NMEDIT" >&6; }
 else
-  need_locks=no
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
 fi
 
-{ $as_echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5
-$as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; }
+  if test "x$ac_ct_NMEDIT" = x; then
+    NMEDIT=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    NMEDIT=$ac_ct_NMEDIT
+  fi
+else
+  NMEDIT="$ac_cv_prog_NMEDIT"
+fi
 
-  runpath_var=
-  allow_undefined_flag=
-  enable_shared_with_static_runtimes=no
-  archive_cmds=
-  archive_expsym_cmds=
-  old_archive_From_new_cmds=
-  old_archive_from_expsyms_cmds=
-  export_dynamic_flag_spec=
-  whole_archive_flag_spec=
-  thread_safe_flag_spec=
-  hardcode_libdir_flag_spec=
-  hardcode_libdir_flag_spec_ld=
-  hardcode_libdir_separator=
-  hardcode_direct=no
-  hardcode_minus_L=no
-  hardcode_shlibpath_var=unsupported
-  link_all_deplibs=unknown
-  hardcode_automatic=no
-  module_cmds=
-  module_expsym_cmds=
-  always_export_symbols=no
-  export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
-  # include_expsyms should be a list of space-separated symbols to be *always*
-  # included in the symbol list
-  include_expsyms=
-  # exclude_expsyms can be an extended regexp of symbols to exclude
-  # it will be wrapped by ` (' and `)$', so one must not match beginning or
-  # end of line.  Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
-  # as well as any symbol that contains `d'.
-  exclude_expsyms='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'
-  # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
-  # platforms (ab)use it in PIC code, but their linkers get confused if
-  # the symbol is explicitly referenced.  Since portable code cannot
-  # rely on this symbol name, it's probably fine to never include it in
-  # preloaded symbol tables.
-  # Exclude shared library initialization/finalization symbols.
-  extract_expsyms_cmds=
-  # Just being paranoid about ensuring that cc_basename is set.
-  for cc_temp in $compiler""; do
-  case $cc_temp in
-    compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
-    distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
-    \-*) ;;
-    *) break;;
-  esac
+    if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}lipo", so it can be a program name with args.
+set dummy ${ac_tool_prefix}lipo; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_LIPO+set}" = set; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$LIPO"; then
+  ac_cv_prog_LIPO="$LIPO" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_LIPO="${ac_tool_prefix}lipo"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
 done
-cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
-
-  case $host_os in
-  cygwin* | mingw* | pw32*)
-    # FIXME: the MSVC++ port hasn't been tested in a loooong time
-    # When not using gcc, we currently assume that we are using
-    # Microsoft Visual C++.
-    if test "$GCC" != yes; then
-      with_gnu_ld=no
-    fi
-    ;;
-  interix*)
-    # we just hope/assume this is gcc and not c89 (= MSVC++)
-    with_gnu_ld=yes
-    ;;
-  openbsd*)
-    with_gnu_ld=no
-    ;;
-  esac
-
-  ld_shlibs=yes
-  if test "$with_gnu_ld" = yes; then
-    # If archive_cmds runs LD, not CC, wlarc should be empty
-    wlarc='${wl}'
+  done
+IFS=$as_save_IFS
 
-    # Set some defaults for GNU ld with shared library support. These
-    # are reset later if shared libraries are not supported. Putting them
-    # here allows them to be overridden if necessary.
-    runpath_var=LD_RUN_PATH
-    hardcode_libdir_flag_spec='${wl}--rpath ${wl}$libdir'
-    export_dynamic_flag_spec='${wl}--export-dynamic'
-    # ancient GNU ld didn't support --whole-archive et. al.
-    if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then
-	whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
-      else
-  	whole_archive_flag_spec=
-    fi
-    supports_anon_versioning=no
-    case `$LD -v 2>/dev/null` in
-      *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11
-      *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
-      *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
-      *\ 2.11.*) ;; # other 2.11 versions
-      *) supports_anon_versioning=yes ;;
-    esac
+fi
+fi
+LIPO=$ac_cv_prog_LIPO
+if test -n "$LIPO"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LIPO" >&5
+$as_echo "$LIPO" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
 
-    # See if GNU ld supports shared libraries.
-    case $host_os in
-    aix[3-9]*)
-      # On AIX/PPC, the GNU linker is very broken
-      if test "$host_cpu" != ia64; then
-	ld_shlibs=no
-	cat <<EOF 1>&2
 
-*** Warning: the GNU linker, at least up to release 2.9.1, is reported
-*** to be unable to reliably create shared libraries on AIX.
-*** Therefore, libtool is disabling shared libraries support.  If you
-*** really care for shared libraries, you may want to modify your PATH
-*** so that a non-GNU linker is found, and then restart.
+fi
+if test -z "$ac_cv_prog_LIPO"; then
+  ac_ct_LIPO=$LIPO
+  # Extract the first word of "lipo", so it can be a program name with args.
+set dummy lipo; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_ac_ct_LIPO+set}" = set; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_LIPO"; then
+  ac_cv_prog_ac_ct_LIPO="$ac_ct_LIPO" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_LIPO="lipo"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
 
-EOF
-      fi
-      ;;
+fi
+fi
+ac_ct_LIPO=$ac_cv_prog_ac_ct_LIPO
+if test -n "$ac_ct_LIPO"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_LIPO" >&5
+$as_echo "$ac_ct_LIPO" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
 
-    amigaos*)
-      archive_cmds='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
-      hardcode_libdir_flag_spec='-L$libdir'
-      hardcode_minus_L=yes
+  if test "x$ac_ct_LIPO" = x; then
+    LIPO=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    LIPO=$ac_ct_LIPO
+  fi
+else
+  LIPO="$ac_cv_prog_LIPO"
+fi
 
-      # Samuel A. Falvo II <kc5tja@dolphin.openprojects.net> reports
-      # that the semantics of dynamic libraries on AmigaOS, at least up
-      # to version 4, is to share data among multiple programs linked
-      # with the same dynamic library.  Since this doesn't match the
-      # behavior of shared libraries on other platforms, we can't use
-      # them.
-      ld_shlibs=no
-      ;;
+    if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}otool", so it can be a program name with args.
+set dummy ${ac_tool_prefix}otool; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_OTOOL+set}" = set; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$OTOOL"; then
+  ac_cv_prog_OTOOL="$OTOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_OTOOL="${ac_tool_prefix}otool"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
 
-    beos*)
-      if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-	allow_undefined_flag=unsupported
-	# Joseph Beckenbach <jrb3@best.com> says some releases of gcc
-	# support --undefined.  This deserves some investigation.  FIXME
-	archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-      else
-	ld_shlibs=no
-      fi
-      ;;
+fi
+fi
+OTOOL=$ac_cv_prog_OTOOL
+if test -n "$OTOOL"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OTOOL" >&5
+$as_echo "$OTOOL" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
 
-    cygwin* | mingw* | pw32*)
-      # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, ) is actually meaningless,
-      # as there is no search path for DLLs.
-      hardcode_libdir_flag_spec='-L$libdir'
-      allow_undefined_flag=unsupported
-      always_export_symbols=no
-      enable_shared_with_static_runtimes=yes
-      export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/'\'' -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols'
 
-      if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
-        archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
-	# If the export-symbols file already is a .def file (1st line
-	# is EXPORTS), use it as is; otherwise, prepend...
-	archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
-	  cp $export_symbols $output_objdir/$soname.def;
-	else
-	  echo EXPORTS > $output_objdir/$soname.def;
-	  cat $export_symbols >> $output_objdir/$soname.def;
-	fi~
-	$CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
-      else
-	ld_shlibs=no
-      fi
-      ;;
+fi
+if test -z "$ac_cv_prog_OTOOL"; then
+  ac_ct_OTOOL=$OTOOL
+  # Extract the first word of "otool", so it can be a program name with args.
+set dummy otool; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_ac_ct_OTOOL+set}" = set; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_OTOOL"; then
+  ac_cv_prog_ac_ct_OTOOL="$ac_ct_OTOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_OTOOL="otool"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
 
-    interix[3-9]*)
-      hardcode_direct=no
-      hardcode_shlibpath_var=no
-      hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
-      export_dynamic_flag_spec='${wl}-E'
-      # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
-      # Instead, shared libraries are loaded at an image base (0x10000000 by
-      # default) and relocated if they conflict, which is a slow very memory
-      # consuming and fragmenting process.  To avoid this, we pick a random,
-      # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
-      # time.  Moving up from 0x10000000 also allows more sbrk(2) space.
-      archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
-      archive_expsym_cmds='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
-      ;;
+fi
+fi
+ac_ct_OTOOL=$ac_cv_prog_ac_ct_OTOOL
+if test -n "$ac_ct_OTOOL"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OTOOL" >&5
+$as_echo "$ac_ct_OTOOL" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
 
-    gnu* | linux* | k*bsd*-gnu)
-      if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-	tmp_addflag=
-	case $cc_basename,$host_cpu in
-	pgcc*)				# Portland Group C compiler
-	  whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
-	  tmp_addflag=' $pic_flag'
-	  ;;
-	pgf77* | pgf90* | pgf95*)	# Portland Group f77 and f90 compilers
-	  whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
-	  tmp_addflag=' $pic_flag -Mnomain' ;;
-	ecc*,ia64* | icc*,ia64*)		# Intel C compiler on ia64
-	  tmp_addflag=' -i_dynamic' ;;
-	efc*,ia64* | ifort*,ia64*)	# Intel Fortran compiler on ia64
-	  tmp_addflag=' -i_dynamic -nofor_main' ;;
-	ifc* | ifort*)			# Intel Fortran compiler
-	  tmp_addflag=' -nofor_main' ;;
-	esac
-	case `$CC -V 2>&1 | sed 5q` in
-	*Sun\ C*)			# Sun C 5.9
-	  whole_archive_flag_spec='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
-	  tmp_sharedflag='-G' ;;
-	*Sun\ F*)			# Sun Fortran 8.3
-	  tmp_sharedflag='-G' ;;
-	*)
-	  tmp_sharedflag='-shared' ;;
-	esac
-	archive_cmds='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+  if test "x$ac_ct_OTOOL" = x; then
+    OTOOL=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    OTOOL=$ac_ct_OTOOL
+  fi
+else
+  OTOOL="$ac_cv_prog_OTOOL"
+fi
 
-	if test $supports_anon_versioning = yes; then
-	  archive_expsym_cmds='$echo "{ global:" > $output_objdir/$libname.ver~
-  cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
-  $echo "local: *; };" >> $output_objdir/$libname.ver~
-	  $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
-	fi
-	link_all_deplibs=no
-      else
-	ld_shlibs=no
-      fi
-      ;;
+    if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}otool64", so it can be a program name with args.
+set dummy ${ac_tool_prefix}otool64; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_OTOOL64+set}" = set; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$OTOOL64"; then
+  ac_cv_prog_OTOOL64="$OTOOL64" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_OTOOL64="${ac_tool_prefix}otool64"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
 
-    netbsd*)
-      if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-	archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
-	wlarc=
-      else
-	archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-	archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-      fi
-      ;;
+fi
+fi
+OTOOL64=$ac_cv_prog_OTOOL64
+if test -n "$OTOOL64"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OTOOL64" >&5
+$as_echo "$OTOOL64" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
 
-    solaris*)
-      if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then
-	ld_shlibs=no
-	cat <<EOF 1>&2
 
-*** Warning: The releases 2.8.* of the GNU linker cannot reliably
-*** create shared libraries on Solaris systems.  Therefore, libtool
-*** is disabling shared libraries support.  We urge you to upgrade GNU
-*** binutils to release 2.9.1 or newer.  Another option is to modify
-*** your PATH or compiler configuration so that the native linker is
-*** used, and then restart.
+fi
+if test -z "$ac_cv_prog_OTOOL64"; then
+  ac_ct_OTOOL64=$OTOOL64
+  # Extract the first word of "otool64", so it can be a program name with args.
+set dummy otool64; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_ac_ct_OTOOL64+set}" = set; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_OTOOL64"; then
+  ac_cv_prog_ac_ct_OTOOL64="$ac_ct_OTOOL64" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_OTOOL64="otool64"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
 
-EOF
-      elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-	archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-	archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-      else
-	ld_shlibs=no
-      fi
-      ;;
+fi
+fi
+ac_ct_OTOOL64=$ac_cv_prog_ac_ct_OTOOL64
+if test -n "$ac_ct_OTOOL64"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OTOOL64" >&5
+$as_echo "$ac_ct_OTOOL64" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
 
-    sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
-      case `$LD -v 2>&1` in
-        *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*)
-	ld_shlibs=no
-	cat <<_LT_EOF 1>&2
+  if test "x$ac_ct_OTOOL64" = x; then
+    OTOOL64=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    OTOOL64=$ac_ct_OTOOL64
+  fi
+else
+  OTOOL64="$ac_cv_prog_OTOOL64"
+fi
 
-*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not
-*** reliably create shared libraries on SCO systems.  Therefore, libtool
-*** is disabling shared libraries support.  We urge you to upgrade GNU
-*** binutils to release 2.16.91.0.3 or newer.  Another option is to modify
-*** your PATH or compiler configuration so that the native linker is
-*** used, and then restart.
 
-_LT_EOF
-	;;
-	*)
-	  if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-	    hardcode_libdir_flag_spec='`test -z "$SCOABSPATH" && echo ${wl}-rpath,$libdir`'
-	    archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib'
-	    archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname,-retain-symbols-file,$export_symbols -o $lib'
-	  else
-	    ld_shlibs=no
-	  fi
-	;;
-      esac
-      ;;
 
-    sunos4*)
-      archive_cmds='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-      wlarc=
-      hardcode_direct=yes
-      hardcode_shlibpath_var=no
-      ;;
 
-    *)
-      if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-	archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-	archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-      else
-	ld_shlibs=no
-      fi
-      ;;
-    esac
 
-    if test "$ld_shlibs" = no; then
-      runpath_var=
-      hardcode_libdir_flag_spec=
-      export_dynamic_flag_spec=
-      whole_archive_flag_spec=
-    fi
-  else
-    # PORTME fill in a description of your system's linker (not GNU ld)
-    case $host_os in
-    aix3*)
-      allow_undefined_flag=unsupported
-      always_export_symbols=yes
-      archive_expsym_cmds='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
-      # Note: this linker hardcodes the directories in LIBPATH if there
-      # are no directories specified by -L.
-      hardcode_minus_L=yes
-      if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then
-	# Neither direct hardcoding nor static linking is supported with a
-	# broken collect2.
-	hardcode_direct=unsupported
-      fi
-      ;;
 
-    aix[4-9]*)
-      if test "$host_cpu" = ia64; then
-	# On IA64, the linker does run time linking by default, so we don't
-	# have to do anything special.
-	aix_use_runtimelinking=no
-	exp_sym_flag='-Bexport'
-	no_entry_flag=""
-      else
-	# If we're using GNU nm, then we don't want the "-C" option.
-	# -C means demangle to AIX nm, but means don't demangle with GNU nm
-	if $NM -V 2>&1 | grep 'GNU' > /dev/null; then
-	  export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols'
-	else
-	  export_symbols_cmds='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols'
-	fi
-	aix_use_runtimelinking=no
 
-	# Test if we are trying to use run time linking or normal
-	# AIX style linking. If -brtl is somewhere in LDFLAGS, we
-	# need to do runtime linking.
-	case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*)
-	  for ld_flag in $LDFLAGS; do
-  	  if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
-  	    aix_use_runtimelinking=yes
-  	    break
-  	  fi
-	  done
-	  ;;
-	esac
 
-	exp_sym_flag='-bexport'
-	no_entry_flag='-bnoentry'
-      fi
 
-      # When large executables or shared objects are built, AIX ld can
-      # have problems creating the table of contents.  If linking a library
-      # or program results in "error TOC overflow" add -mminimal-toc to
-      # CXXFLAGS/CFLAGS for g++/gcc.  In the cases where that is not
-      # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
 
-      archive_cmds=''
-      hardcode_direct=yes
-      hardcode_libdir_separator=':'
-      link_all_deplibs=yes
 
-      if test "$GCC" = yes; then
-	case $host_os in aix4.[012]|aix4.[012].*)
-	# We only want to do this on AIX 4.2 and lower, the check
-	# below for broken collect2 doesn't work under 4.3+
-	  collect2name=`${CC} -print-prog-name=collect2`
-	  if test -f "$collect2name" && \
-  	   strings "$collect2name" | grep resolve_lib_name >/dev/null
-	  then
-  	  # We have reworked collect2
-  	  :
-	  else
-  	  # We have old collect2
-  	  hardcode_direct=unsupported
-  	  # It fails to find uninstalled libraries when the uninstalled
-  	  # path is not listed in the libpath.  Setting hardcode_minus_L
-  	  # to unsupported forces relinking
-  	  hardcode_minus_L=yes
-  	  hardcode_libdir_flag_spec='-L$libdir'
-  	  hardcode_libdir_separator=
-	  fi
-	  ;;
-	esac
-	shared_flag='-shared'
-	if test "$aix_use_runtimelinking" = yes; then
-	  shared_flag="$shared_flag "'${wl}-G'
-	fi
-      else
-	# not using gcc
-	if test "$host_cpu" = ia64; then
-  	# VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
-  	# chokes on -Wl,-G. The following line is correct:
-	  shared_flag='-G'
-	else
-	  if test "$aix_use_runtimelinking" = yes; then
-	    shared_flag='${wl}-G'
-	  else
-	    shared_flag='${wl}-bM:SRE'
-	  fi
-	fi
-      fi
 
-      # It seems that -bexpall does not export symbols beginning with
-      # underscore (_), so it is better to generate a list of symbols to export.
-      always_export_symbols=yes
-      if test "$aix_use_runtimelinking" = yes; then
-	# Warning - without using the other runtime loading flags (-brtl),
-	# -berok will link without error, but may produce a broken library.
-	allow_undefined_flag='-berok'
-       # Determine the default libpath from the value encoded in an empty executable.
-       cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
 
-int
-main ()
-{
 
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_link") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest$ac_exeext && {
-	 test "$cross_compiling" = yes ||
-	 $as_test_x conftest$ac_exeext
-       }; then
 
-lt_aix_libpath_sed='
-    /Import File Strings/,/^$/ {
-	/^0/ {
-	    s/^0  *\(.*\)$/\1/
-	    p
-	}
-    }'
-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-# Check for a 64-bit object if we didn't find anything.
-if test -z "$aix_libpath"; then
-  aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-fi
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
 
 
-fi
 
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-      conftest$ac_exeext conftest.$ac_ext
-if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
 
-       hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
-	archive_expsym_cmds="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
-       else
-	if test "$host_cpu" = ia64; then
-	  hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib'
-	  allow_undefined_flag="-z nodefs"
-	  archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
+
+
+
+
+
+
+
+
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -single_module linker flag" >&5
+$as_echo_n "checking for -single_module linker flag... " >&6; }
+if test "${lt_cv_apple_cc_single_mod+set}" = set; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_apple_cc_single_mod=no
+      if test -z "${LT_MULTI_MODULE}"; then
+	# By default we will add the -single_module flag. You can override
+	# by either setting the environment variable LT_MULTI_MODULE
+	# non-empty at configure time, or by adding -multi_module to the
+	# link flags.
+	rm -rf libconftest.dylib*
+	echo "int foo(void){return 1;}" > conftest.c
+	echo "$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
+-dynamiclib -Wl,-single_module conftest.c" >&5
+	$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
+	  -dynamiclib -Wl,-single_module conftest.c 2>conftest.err
+        _lt_result=$?
+	if test -f libconftest.dylib && test ! -s conftest.err && test $_lt_result = 0; then
+	  lt_cv_apple_cc_single_mod=yes
 	else
-	 # Determine the default libpath from the value encoded in an empty executable.
-	 cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+	  cat conftest.err >&5
+	fi
+	rm -rf libconftest.dylib*
+	rm -f conftest.*
+      fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_apple_cc_single_mod" >&5
+$as_echo "$lt_cv_apple_cc_single_mod" >&6; }
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -exported_symbols_list linker flag" >&5
+$as_echo_n "checking for -exported_symbols_list linker flag... " >&6; }
+if test "${lt_cv_ld_exported_symbols_list+set}" = set; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_ld_exported_symbols_list=no
+      save_LDFLAGS=$LDFLAGS
+      echo "_main" > conftest.sym
+      LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym"
+      cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 
 int
@@ -10193,3083 +8540,2105 @@
   return 0;
 }
 _ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_link") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest$ac_exeext && {
-	 test "$cross_compiling" = yes ||
-	 $as_test_x conftest$ac_exeext
-       }; then
-
-lt_aix_libpath_sed='
-    /Import File Strings/,/^$/ {
-	/^0/ {
-	    s/^0  *\(.*\)$/\1/
-	    p
-	}
-    }'
-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-# Check for a 64-bit object if we didn't find anything.
-if test -z "$aix_libpath"; then
-  aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-fi
+if ac_fn_c_try_link "$LINENO"; then :
+  lt_cv_ld_exported_symbols_list=yes
 else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-
+  lt_cv_ld_exported_symbols_list=no
 fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+	LDFLAGS="$save_LDFLAGS"
 
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-      conftest$ac_exeext conftest.$ac_ext
-if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
-
-	 hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
-	  # Warning - without using the other run time loading flags,
-	  # -berok will link without error, but may produce a broken library.
-	  no_undefined_flag=' ${wl}-bernotok'
-	  allow_undefined_flag=' ${wl}-berok'
-	  # Exported symbols can be pulled into shared objects from archives
-	  whole_archive_flag_spec='$convenience'
-	  archive_cmds_need_lc=yes
-	  # This is similar to how AIX traditionally builds its shared libraries.
-	  archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
-	fi
-      fi
-      ;;
-
-    amigaos*)
-      archive_cmds='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
-      hardcode_libdir_flag_spec='-L$libdir'
-      hardcode_minus_L=yes
-      # see comment about different semantics on the GNU ld section
-      ld_shlibs=no
-      ;;
-
-    bsdi[45]*)
-      export_dynamic_flag_spec=-rdynamic
-      ;;
-
-    cygwin* | mingw* | pw32*)
-      # When not using gcc, we currently assume that we are using
-      # Microsoft Visual C++.
-      # hardcode_libdir_flag_spec is actually meaningless, as there is
-      # no search path for DLLs.
-      hardcode_libdir_flag_spec=' '
-      allow_undefined_flag=unsupported
-      # Tell ltmain to make .lib files, not .a files.
-      libext=lib
-      # Tell ltmain to make .dll files, not .so files.
-      shrext_cmds=".dll"
-      # FIXME: Setting linknames here is a bad hack.
-      archive_cmds='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames='
-      # The linker will automatically build a .lib file if we build a DLL.
-      old_archive_From_new_cmds='true'
-      # FIXME: Should let the user specify the lib program.
-      old_archive_cmds='lib -OUT:$oldlib$oldobjs$old_deplibs'
-      fix_srcfile_path='`cygpath -w "$srcfile"`'
-      enable_shared_with_static_runtimes=yes
-      ;;
-
-    darwin* | rhapsody*)
-      case $host_os in
-        rhapsody* | darwin1.[012])
-         allow_undefined_flag='${wl}-undefined ${wl}suppress'
-         ;;
-       *) # Darwin 1.3 on
-         if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then
-           allow_undefined_flag='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
-         else
-           case ${MACOSX_DEPLOYMENT_TARGET} in
-             10.[012])
-               allow_undefined_flag='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
-               ;;
-             10.*)
-               allow_undefined_flag='${wl}-undefined ${wl}dynamic_lookup'
-               ;;
-           esac
-         fi
-         ;;
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_exported_symbols_list" >&5
+$as_echo "$lt_cv_ld_exported_symbols_list" >&6; }
+    case $host_os in
+    rhapsody* | darwin1.[012])
+      _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;;
+    darwin1.*)
+      _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
+    darwin*) # darwin 5.x on
+      # if running on 10.5 or later, the deployment target defaults
+      # to the OS version, if on x86, and 10.4, the deployment
+      # target defaults to 10.4. Don't you love it?
+      case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in
+	10.0,*86*-darwin8*|10.0,*-darwin[91]*)
+	  _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
+	10.[012]*)
+	  _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
+	10.*)
+	  _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
       esac
-      archive_cmds_need_lc=no
-      hardcode_direct=no
-      hardcode_automatic=yes
-      hardcode_shlibpath_var=unsupported
-      whole_archive_flag_spec=''
-      link_all_deplibs=yes
-    if test "$GCC" = yes ; then
-    	output_verbose_link_cmd='echo'
-        archive_cmds="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}"
-        module_cmds="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}"
-        archive_expsym_cmds="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}"
-        module_expsym_cmds="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}"
+    ;;
+  esac
+    if test "$lt_cv_apple_cc_single_mod" = "yes"; then
+      _lt_dar_single_mod='$single_module'
+    fi
+    if test "$lt_cv_ld_exported_symbols_list" = "yes"; then
+      _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym'
     else
-      case $cc_basename in
-        xlc*)
-         output_verbose_link_cmd='echo'
-         archive_cmds='$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $xlcverstring'
-         module_cmds='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
-          # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
-         archive_expsym_cmds='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $xlcverstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-          module_expsym_cmds='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag  -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-          ;;
-       *)
-         ld_shlibs=no
-          ;;
-      esac
+      _lt_dar_export_syms='~$NMEDIT -s $output_objdir/${libname}-symbols.expsym ${lib}'
     fi
-      ;;
+    if test "$DSYMUTIL" != ":"; then
+      _lt_dsymutil='~$DSYMUTIL $lib || :'
+    else
+      _lt_dsymutil=
+    fi
+    ;;
+  esac
 
-    dgux*)
-      archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-      hardcode_libdir_flag_spec='-L$libdir'
-      hardcode_shlibpath_var=no
-      ;;
+for ac_header in dlfcn.h
+do :
+  ac_fn_c_check_header_compile "$LINENO" "dlfcn.h" "ac_cv_header_dlfcn_h" "$ac_includes_default
+"
+if test "x$ac_cv_header_dlfcn_h" = x""yes; then :
+  cat >>confdefs.h <<_ACEOF
+#define HAVE_DLFCN_H 1
+_ACEOF
 
-    freebsd1*)
-      ld_shlibs=no
-      ;;
+fi
 
-    # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
-    # support.  Future versions do this automatically, but an explicit c++rt0.o
-    # does not break anything, and helps significantly (at the cost of a little
-    # extra space).
-    freebsd2.2*)
-      archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
-      hardcode_libdir_flag_spec='-R$libdir'
-      hardcode_direct=yes
-      hardcode_shlibpath_var=no
-      ;;
+done
 
-    # Unfortunately, older versions of FreeBSD 2 do not have this feature.
-    freebsd2*)
-      archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-      hardcode_direct=yes
-      hardcode_minus_L=yes
-      hardcode_shlibpath_var=no
-      ;;
 
-    # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
-    freebsd* | dragonfly*)
-      archive_cmds='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
-      hardcode_libdir_flag_spec='-R$libdir'
-      hardcode_direct=yes
-      hardcode_shlibpath_var=no
-      ;;
 
-    hpux9*)
-      if test "$GCC" = yes; then
-	archive_cmds='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
-      else
-	archive_cmds='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
-      fi
-      hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
-      hardcode_libdir_separator=:
-      hardcode_direct=yes
+ac_ext=cpp
+ac_cpp='$CXXCPP $CPPFLAGS'
+ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
+if test -z "$CXX"; then
+  if test -n "$CCC"; then
+    CXX=$CCC
+  else
+    if test -n "$ac_tool_prefix"; then
+  for ac_prog in g++ c++ gpp aCC CC cxx cc++ cl.exe FCC KCC RCC xlC_r xlC
+  do
+    # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_CXX+set}" = set; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$CXX"; then
+  ac_cv_prog_CXX="$CXX" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_CXX="$ac_tool_prefix$ac_prog"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
 
-      # hardcode_minus_L: Not really in the search PATH,
-      # but as the default location of the library.
-      hardcode_minus_L=yes
-      export_dynamic_flag_spec='${wl}-E'
-      ;;
+fi
+fi
+CXX=$ac_cv_prog_CXX
+if test -n "$CXX"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CXX" >&5
+$as_echo "$CXX" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
 
-    hpux10*)
-      if test "$GCC" = yes -a "$with_gnu_ld" = no; then
-	archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
-      else
-	archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
-      fi
-      if test "$with_gnu_ld" = no; then
-	hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
-	hardcode_libdir_separator=:
 
-	hardcode_direct=yes
-	export_dynamic_flag_spec='${wl}-E'
+    test -n "$CXX" && break
+  done
+fi
+if test -z "$CXX"; then
+  ac_ct_CXX=$CXX
+  for ac_prog in g++ c++ gpp aCC CC cxx cc++ cl.exe FCC KCC RCC xlC_r xlC
+do
+  # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if test "${ac_cv_prog_ac_ct_CXX+set}" = set; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -n "$ac_ct_CXX"; then
+  ac_cv_prog_ac_ct_CXX="$ac_ct_CXX" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_CXX="$ac_prog"
+    $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+  done
+IFS=$as_save_IFS
 
-	# hardcode_minus_L: Not really in the search PATH,
-	# but as the default location of the library.
-	hardcode_minus_L=yes
-      fi
-      ;;
+fi
+fi
+ac_ct_CXX=$ac_cv_prog_ac_ct_CXX
+if test -n "$ac_ct_CXX"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CXX" >&5
+$as_echo "$ac_ct_CXX" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
 
-    hpux11*)
-      if test "$GCC" = yes -a "$with_gnu_ld" = no; then
-	case $host_cpu in
-	hppa*64*)
-	  archive_cmds='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-	  ;;
-	ia64*)
-	  archive_cmds='$CC -shared ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
-	  ;;
-	*)
-	  archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
-	  ;;
-	esac
-      else
-	case $host_cpu in
-	hppa*64*)
-	  archive_cmds='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-	  ;;
-	ia64*)
-	  archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
-	  ;;
-	*)
-	  archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
-	  ;;
-	esac
-      fi
-      if test "$with_gnu_ld" = no; then
-	hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
-	hardcode_libdir_separator=:
 
-	case $host_cpu in
-	hppa*64*|ia64*)
-	  hardcode_libdir_flag_spec_ld='+b $libdir'
-	  hardcode_direct=no
-	  hardcode_shlibpath_var=no
-	  ;;
-	*)
-	  hardcode_direct=yes
-	  export_dynamic_flag_spec='${wl}-E'
+  test -n "$ac_ct_CXX" && break
+done
 
-	  # hardcode_minus_L: Not really in the search PATH,
-	  # but as the default location of the library.
-	  hardcode_minus_L=yes
-	  ;;
-	esac
-      fi
-      ;;
+  if test "x$ac_ct_CXX" = x; then
+    CXX="g++"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+    CXX=$ac_ct_CXX
+  fi
+fi
 
-    irix5* | irix6* | nonstopux*)
-      if test "$GCC" = yes; then
-	archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-      else
-	archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-	hardcode_libdir_flag_spec_ld='-rpath $libdir'
-      fi
-      hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
-      hardcode_libdir_separator=:
-      link_all_deplibs=yes
-      ;;
+  fi
+fi
+# Provide some information about the compiler.
+$as_echo "$as_me:${as_lineno-$LINENO}: checking for C++ compiler version" >&5
+set X $ac_compile
+ac_compiler=$2
+for ac_option in --version -v -V -qversion; do
+  { { ac_try="$ac_compiler $ac_option >&5"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+  (eval "$ac_compiler $ac_option >&5") 2>conftest.err
+  ac_status=$?
+  if test -s conftest.err; then
+    sed '10a\
+... rest of stderr output deleted ...
+         10q' conftest.err >conftest.er1
+    cat conftest.er1 >&5
+    rm -f conftest.er1 conftest.err
+  fi
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }
+done
 
-    netbsd*)
-      if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-	archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'  # a.out
-      else
-	archive_cmds='$LD -shared -o $lib $libobjs $deplibs $linker_flags'      # ELF
-      fi
-      hardcode_libdir_flag_spec='-R$libdir'
-      hardcode_direct=yes
-      hardcode_shlibpath_var=no
-      ;;
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C++ compiler" >&5
+$as_echo_n "checking whether we are using the GNU C++ compiler... " >&6; }
+if test "${ac_cv_cxx_compiler_gnu+set}" = set; then :
+  $as_echo_n "(cached) " >&6
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
 
-    newsos6)
-      archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-      hardcode_direct=yes
-      hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
-      hardcode_libdir_separator=:
-      hardcode_shlibpath_var=no
-      ;;
+int
+main ()
+{
+#ifndef __GNUC__
+       choke me
+#endif
 
-    openbsd*)
-      if test -f /usr/libexec/ld.so; then
-	hardcode_direct=yes
-	hardcode_shlibpath_var=no
-	if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-	  archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
-	  archive_expsym_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
-	  hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
-	  export_dynamic_flag_spec='${wl}-E'
-	else
-	  case $host_os in
-	   openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*)
-	     archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-	     hardcode_libdir_flag_spec='-R$libdir'
-	     ;;
-	   *)
-	     archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
-	     hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
-	     ;;
-	  esac
-        fi
-      else
-	ld_shlibs=no
-      fi
-      ;;
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_cxx_try_compile "$LINENO"; then :
+  ac_compiler_gnu=yes
+else
+  ac_compiler_gnu=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ac_cv_cxx_compiler_gnu=$ac_compiler_gnu
 
-    os2*)
-      hardcode_libdir_flag_spec='-L$libdir'
-      hardcode_minus_L=yes
-      allow_undefined_flag=unsupported
-      archive_cmds='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
-      old_archive_From_new_cmds='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
-      ;;
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_cxx_compiler_gnu" >&5
+$as_echo "$ac_cv_cxx_compiler_gnu" >&6; }
+if test $ac_compiler_gnu = yes; then
+  GXX=yes
+else
+  GXX=
+fi
+ac_test_CXXFLAGS=${CXXFLAGS+set}
+ac_save_CXXFLAGS=$CXXFLAGS
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CXX accepts -g" >&5
+$as_echo_n "checking whether $CXX accepts -g... " >&6; }
+if test "${ac_cv_prog_cxx_g+set}" = set; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_save_cxx_werror_flag=$ac_cxx_werror_flag
+   ac_cxx_werror_flag=yes
+   ac_cv_prog_cxx_g=no
+   CXXFLAGS="-g"
+   cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
 
-    osf3*)
-      if test "$GCC" = yes; then
-	allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
-	archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-      else
-	allow_undefined_flag=' -expect_unresolved \*'
-	archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-      fi
-      hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
-      hardcode_libdir_separator=:
-      ;;
+int
+main ()
+{
 
-    osf4* | osf5*)	# as osf3* with the addition of -msym flag
-      if test "$GCC" = yes; then
-	allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
-	archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-	hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
-      else
-	allow_undefined_flag=' -expect_unresolved \*'
-	archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-	archive_expsym_cmds='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~
-	$LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~$rm $lib.exp'
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_cxx_try_compile "$LINENO"; then :
+  ac_cv_prog_cxx_g=yes
+else
+  CXXFLAGS=""
+      cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
 
-	# Both c and cxx compiler support -rpath directly
-	hardcode_libdir_flag_spec='-rpath $libdir'
-      fi
-      hardcode_libdir_separator=:
-      ;;
+int
+main ()
+{
 
-    solaris*)
-      no_undefined_flag=' -z text'
-      if test "$GCC" = yes; then
-	wlarc='${wl}'
-	archive_cmds='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-	archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-	  $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp'
-      else
-	wlarc=''
-	archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
-	archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-  	$LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
-      fi
-      hardcode_libdir_flag_spec='-R$libdir'
-      hardcode_shlibpath_var=no
-      case $host_os in
-      solaris2.[0-5] | solaris2.[0-5].*) ;;
-      *)
-	# The compiler driver will combine and reorder linker options,
-	# but understands `-z linker_flag'.  GCC discards it without `$wl',
-	# but is careful enough not to reorder.
- 	# Supported since Solaris 2.6 (maybe 2.5.1?)
-	if test "$GCC" = yes; then
-	  whole_archive_flag_spec='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
-	else
-	  whole_archive_flag_spec='-z allextract$convenience -z defaultextract'
-	fi
-	;;
-      esac
-      link_all_deplibs=yes
-      ;;
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_cxx_try_compile "$LINENO"; then :
 
-    sunos4*)
-      if test "x$host_vendor" = xsequent; then
-	# Use $CC to link under sequent, because it throws in some extra .o
-	# files that make .init and .fini sections work.
-	archive_cmds='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
-      else
-	archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
-      fi
-      hardcode_libdir_flag_spec='-L$libdir'
-      hardcode_direct=yes
-      hardcode_minus_L=yes
-      hardcode_shlibpath_var=no
-      ;;
+else
+  ac_cxx_werror_flag=$ac_save_cxx_werror_flag
+	 CXXFLAGS="-g"
+	 cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
 
-    sysv4)
-      case $host_vendor in
-	sni)
-	  archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-	  hardcode_direct=yes # is this really true???
-	;;
-	siemens)
-	  ## LD is ld it makes a PLAMLIB
-	  ## CC just makes a GrossModule.
-	  archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags'
-	  reload_cmds='$CC -r -o $output$reload_objs'
-	  hardcode_direct=no
-        ;;
-	motorola)
-	  archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-	  hardcode_direct=no #Motorola manual says yes, but my tests say they lie
-	;;
-      esac
-      runpath_var='LD_RUN_PATH'
-      hardcode_shlibpath_var=no
-      ;;
+int
+main ()
+{
 
-    sysv4.3*)
-      archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-      hardcode_shlibpath_var=no
-      export_dynamic_flag_spec='-Bexport'
-      ;;
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_cxx_try_compile "$LINENO"; then :
+  ac_cv_prog_cxx_g=yes
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+   ac_cxx_werror_flag=$ac_save_cxx_werror_flag
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cxx_g" >&5
+$as_echo "$ac_cv_prog_cxx_g" >&6; }
+if test "$ac_test_CXXFLAGS" = set; then
+  CXXFLAGS=$ac_save_CXXFLAGS
+elif test $ac_cv_prog_cxx_g = yes; then
+  if test "$GXX" = yes; then
+    CXXFLAGS="-g -O2"
+  else
+    CXXFLAGS="-g"
+  fi
+else
+  if test "$GXX" = yes; then
+    CXXFLAGS="-O2"
+  else
+    CXXFLAGS=
+  fi
+fi
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
 
-    sysv4*MP*)
-      if test -d /usr/nec; then
-	archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-	hardcode_shlibpath_var=no
-	runpath_var=LD_RUN_PATH
-	hardcode_runpath_var=yes
-	ld_shlibs=yes
-      fi
-      ;;
+depcc="$CXX"  am_compiler_list=
 
-    sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*)
-      no_undefined_flag='${wl}-z,text'
-      archive_cmds_need_lc=no
-      hardcode_shlibpath_var=no
-      runpath_var='LD_RUN_PATH'
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5
+$as_echo_n "checking dependency style of $depcc... " >&6; }
+if test "${am_cv_CXX_dependencies_compiler_type+set}" = set; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
+  # We make a subdir and do the tests there.  Otherwise we can end up
+  # making bogus files that we don't know about and never remove.  For
+  # instance it was reported that on HP-UX the gcc test will end up
+  # making a dummy file named `D' -- because `-MD' means `put the output
+  # in D'.
+  mkdir conftest.dir
+  # Copy depcomp to subdir because otherwise we won't find it if we're
+  # using a relative directory.
+  cp "$am_depcomp" conftest.dir
+  cd conftest.dir
+  # We will build objects and dependencies in a subdirectory because
+  # it helps to detect inapplicable dependency modes.  For instance
+  # both Tru64's cc and ICC support -MD to output dependencies as a
+  # side effect of compilation, but ICC will put the dependencies in
+  # the current directory while Tru64 will put them in the object
+  # directory.
+  mkdir sub
 
-      if test "$GCC" = yes; then
-	archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-	archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-      else
-	archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-	archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-      fi
-      ;;
+  am_cv_CXX_dependencies_compiler_type=none
+  if test "$am_compiler_list" = ""; then
+     am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp`
+  fi
+  am__universal=false
+  case " $depcc " in #(
+     *\ -arch\ *\ -arch\ *) am__universal=true ;;
+     esac
 
-    sysv5* | sco3.2v5* | sco5v6*)
-      # Note: We can NOT use -z defs as we might desire, because we do not
-      # link with -lc, and that would cause any symbols used from libc to
-      # always be unresolved, which means just about no library would
-      # ever link correctly.  If we're not using GNU ld we use -z text
-      # though, which does catch some bad symbols but isn't as heavy-handed
-      # as -z defs.
-      no_undefined_flag='${wl}-z,text'
-      allow_undefined_flag='${wl}-z,nodefs'
-      archive_cmds_need_lc=no
-      hardcode_shlibpath_var=no
-      hardcode_libdir_flag_spec='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`'
-      hardcode_libdir_separator=':'
-      link_all_deplibs=yes
-      export_dynamic_flag_spec='${wl}-Bexport'
-      runpath_var='LD_RUN_PATH'
+  for depmode in $am_compiler_list; do
+    # Setup a source with many dependencies, because some compilers
+    # like to wrap large dependency lists on column 80 (with \), and
+    # we should not choose a depcomp mode which is confused by this.
+    #
+    # We need to recreate these files for each test, as the compiler may
+    # overwrite some of them when testing with obscure command lines.
+    # This happens at least with the AIX C compiler.
+    : > sub/conftest.c
+    for i in 1 2 3 4 5 6; do
+      echo '#include "conftst'$i'.h"' >> sub/conftest.c
+      # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with
+      # Solaris 8's {/usr,}/bin/sh.
+      touch sub/conftst$i.h
+    done
+    echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
 
-      if test "$GCC" = yes; then
-	archive_cmds='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
-	archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
+    # We check with `-c' and `-o' for the sake of the "dashmstdout"
+    # mode.  It turns out that the SunPro C++ compiler does not properly
+    # handle `-M -o', and we need to detect this.  Also, some Intel
+    # versions had trouble with output in subdirs
+    am__obj=sub/conftest.${OBJEXT-o}
+    am__minus_obj="-o $am__obj"
+    case $depmode in
+    gcc)
+      # This depmode causes a compiler race in universal mode.
+      test "$am__universal" = false || continue
+      ;;
+    nosideeffect)
+      # after this tag, mechanisms are not by side-effect, so they'll
+      # only be used when explicitly requested
+      if test "x$enable_dependency_tracking" = xyes; then
+	continue
       else
-	archive_cmds='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
-	archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	break
       fi
       ;;
-
-    uts4*)
-      archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-      hardcode_libdir_flag_spec='-L$libdir'
-      hardcode_shlibpath_var=no
-      ;;
-
-    *)
-      ld_shlibs=no
+    msvisualcpp | msvcmsys)
+      # This compiler won't grok `-c -o', but also, the minuso test has
+      # not run yet.  These depmodes are late enough in the game, and
+      # so weak that their functioning should not be impacted.
+      am__obj=conftest.${OBJEXT-o}
+      am__minus_obj=
       ;;
+    none) break ;;
     esac
-  fi
+    if depmode=$depmode \
+       source=sub/conftest.c object=$am__obj \
+       depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
+       $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \
+         >/dev/null 2>conftest.err &&
+       grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
+       grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
+       grep $am__obj sub/conftest.Po > /dev/null 2>&1 &&
+       ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
+      # icc doesn't choke on unknown options, it will just issue warnings
+      # or remarks (even with -Werror).  So we grep stderr for any message
+      # that says an option was ignored or not supported.
+      # When given -MP, icc 7.0 and 7.1 complain thusly:
+      #   icc: Command line warning: ignoring option '-M'; no argument required
+      # The diagnosis changed in icc 8.0:
+      #   icc: Command line remark: option '-MP' not supported
+      if (grep 'ignoring option' conftest.err ||
+          grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
+        am_cv_CXX_dependencies_compiler_type=$depmode
+        break
+      fi
+    fi
+  done
 
-{ $as_echo "$as_me:$LINENO: result: $ld_shlibs" >&5
-$as_echo "$ld_shlibs" >&6; }
-test "$ld_shlibs" = no && can_build_shared=no
+  cd ..
+  rm -rf conftest.dir
+else
+  am_cv_CXX_dependencies_compiler_type=none
+fi
 
-#
-# Do we need to explicitly link libc?
-#
-case "x$archive_cmds_need_lc" in
-x|xyes)
-  # Assume -lc should be added
-  archive_cmds_need_lc=yes
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_CXX_dependencies_compiler_type" >&5
+$as_echo "$am_cv_CXX_dependencies_compiler_type" >&6; }
+CXXDEPMODE=depmode=$am_cv_CXX_dependencies_compiler_type
 
-  if test "$enable_shared" = yes && test "$GCC" = yes; then
-    case $archive_cmds in
-    *'~'*)
-      # FIXME: we may have to deal with multi-command sequences.
-      ;;
-    '$CC '*)
-      # Test whether the compiler implicitly links with -lc since on some
-      # systems, -lgcc has to come before -lc. If gcc already passes -lc
-      # to ld, don't add -lc before -lgcc.
-      { $as_echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5
-$as_echo_n "checking whether -lc should be explicitly linked in... " >&6; }
-      $rm conftest*
-      echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+ if
+  test "x$enable_dependency_tracking" != xno \
+  && test "$am_cv_CXX_dependencies_compiler_type" = gcc3; then
+  am__fastdepCXX_TRUE=
+  am__fastdepCXX_FALSE='#'
+else
+  am__fastdepCXX_TRUE='#'
+  am__fastdepCXX_FALSE=
+fi
 
-      if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } 2>conftest.err; then
-        soname=conftest
-        lib=conftest
-        libobjs=conftest.$ac_objext
-        deplibs=
-        wl=$lt_prog_compiler_wl
-	pic_flag=$lt_prog_compiler_pic
-        compiler_flags=-v
-        linker_flags=-v
-        verstring=
-        output_objdir=.
-        libname=conftest
-        lt_save_allow_undefined_flag=$allow_undefined_flag
-        allow_undefined_flag=
-        if { (eval echo "$as_me:$LINENO: \"$archive_cmds 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1\"") >&5
-  (eval $archive_cmds 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) 2>&5
-  ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }
-        then
-	  archive_cmds_need_lc=no
-        else
-	  archive_cmds_need_lc=yes
-        fi
-        allow_undefined_flag=$lt_save_allow_undefined_flag
-      else
-        cat conftest.err 1>&5
-      fi
-      $rm conftest*
-      { $as_echo "$as_me:$LINENO: result: $archive_cmds_need_lc" >&5
-$as_echo "$archive_cmds_need_lc" >&6; }
-      ;;
-    esac
-  fi
-  ;;
-esac
 
-{ $as_echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5
-$as_echo_n "checking dynamic linker characteristics... " >&6; }
-library_names_spec=
-libname_spec='lib$name'
-soname_spec=
-shrext_cmds=".so"
-postinstall_cmds=
-postuninstall_cmds=
-finish_cmds=
-finish_eval=
-shlibpath_var=
-shlibpath_overrides_runpath=unknown
-version_type=none
-dynamic_linker="$host_os ld.so"
-sys_lib_dlsearch_path_spec="/lib /usr/lib"
+if test -n "$CXX" && ( test "X$CXX" != "Xno" &&
+    ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) ||
+    (test "X$CXX" != "Xg++"))) ; then
+  ac_ext=cpp
+ac_cpp='$CXXCPP $CPPFLAGS'
+ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to run the C++ preprocessor" >&5
+$as_echo_n "checking how to run the C++ preprocessor... " >&6; }
+if test -z "$CXXCPP"; then
+  if test "${ac_cv_prog_CXXCPP+set}" = set; then :
+  $as_echo_n "(cached) " >&6
+else
+      # Double quotes because CXXCPP needs to be expanded
+    for CXXCPP in "$CXX -E" "/lib/cpp"
+    do
+      ac_preproc_ok=false
+for ac_cxx_preproc_warn_flag in '' yes
+do
+  # Use a header file that comes with gcc, so configuring glibc
+  # with a fresh cross-compiler works.
+  # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+  # <limits.h> exists even on freestanding compilers.
+  # On the NeXT, cc -E runs the code through the compiler's parser,
+  # not just through cpp. "Syntax error" is here to catch this case.
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+		     Syntax error
+_ACEOF
+if ac_fn_cxx_try_cpp "$LINENO"; then :
 
-if test "$GCC" = yes; then
-  case $host_os in
-    darwin*) lt_awk_arg="/^libraries:/,/LR/" ;;
-    *) lt_awk_arg="/^libraries:/" ;;
-  esac
-  lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e "s,=/,/,g"`
-  if echo "$lt_search_path_spec" | grep ';' >/dev/null ; then
-    # if the path contains ";" then we assume it to be the separator
-    # otherwise default to the standard path separator (i.e. ":") - it is
-    # assumed that no part of a normal pathname contains ";" but that should
-    # okay in the real world where ";" in dirpaths is itself problematic.
-    lt_search_path_spec=`echo "$lt_search_path_spec" | $SED -e 's/;/ /g'`
-  else
-    lt_search_path_spec=`echo "$lt_search_path_spec" | $SED  -e "s/$PATH_SEPARATOR/ /g"`
-  fi
-  # Ok, now we have the path, separated by spaces, we can step through it
-  # and add multilib dir if necessary.
-  lt_tmp_lt_search_path_spec=
-  lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null`
-  for lt_sys_path in $lt_search_path_spec; do
-    if test -d "$lt_sys_path/$lt_multi_os_dir"; then
-      lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir"
-    else
-      test -d "$lt_sys_path" && \
-	lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path"
-    fi
-  done
-  lt_search_path_spec=`echo $lt_tmp_lt_search_path_spec | awk '
-BEGIN {RS=" "; FS="/|\n";} {
-  lt_foo="";
-  lt_count=0;
-  for (lt_i = NF; lt_i > 0; lt_i--) {
-    if ($lt_i != "" && $lt_i != ".") {
-      if ($lt_i == "..") {
-        lt_count++;
-      } else {
-        if (lt_count == 0) {
-          lt_foo="/" $lt_i lt_foo;
-        } else {
-          lt_count--;
-        }
-      }
-    }
-  }
-  if (lt_foo != "") { lt_freq[lt_foo]++; }
-  if (lt_freq[lt_foo] == 1) { print lt_foo; }
-}'`
-  sys_lib_search_path_spec=`echo $lt_search_path_spec`
 else
-  sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
+  # Broken: fails on valid input.
+continue
 fi
-need_lib_prefix=unknown
-hardcode_into_libs=no
+rm -f conftest.err conftest.$ac_ext
 
-# when you set need_version to no, make sure it does not cause -set_version
-# flags to be left without arguments
-need_version=unknown
+  # OK, works on sane cases.  Now check whether nonexistent headers
+  # can be detected and how.
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <ac_nonexistent.h>
+_ACEOF
+if ac_fn_cxx_try_cpp "$LINENO"; then :
+  # Broken: success on invalid input.
+continue
+else
+  # Passes both tests.
+ac_preproc_ok=:
+break
+fi
+rm -f conftest.err conftest.$ac_ext
 
-case $host_os in
-aix3*)
-  version_type=linux
-  library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
-  shlibpath_var=LIBPATH
+done
+# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
+rm -f conftest.err conftest.$ac_ext
+if $ac_preproc_ok; then :
+  break
+fi
 
-  # AIX 3 has no versioning support, so we append a major version to the name.
-  soname_spec='${libname}${release}${shared_ext}$major'
-  ;;
+    done
+    ac_cv_prog_CXXCPP=$CXXCPP
 
-aix[4-9]*)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  hardcode_into_libs=yes
-  if test "$host_cpu" = ia64; then
-    # AIX 5 supports IA64
-    library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
-    shlibpath_var=LD_LIBRARY_PATH
-  else
-    # With GCC up to 2.95.x, collect2 would create an import file
-    # for dependence libraries.  The import file would start with
-    # the line `#! .'.  This would cause the generated library to
-    # depend on `.', always an invalid library.  This was fixed in
-    # development snapshots of GCC prior to 3.0.
-    case $host_os in
-      aix4 | aix4.[01] | aix4.[01].*)
-      if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
-	   echo ' yes '
-	   echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then
-	:
-      else
-	can_build_shared=no
-      fi
-      ;;
-    esac
-    # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
-    # soname into executable. Probably we can add versioning support to
-    # collect2, so additional links can be useful in future.
-    if test "$aix_use_runtimelinking" = yes; then
-      # If using run time linking (on AIX 4.2 or later) use lib<name>.so
-      # instead of lib<name>.a to let people know that these are not
-      # typical AIX shared libraries.
-      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-    else
-      # We preserve .a as extension for shared libraries through AIX4.2
-      # and later when we are not doing run time linking.
-      library_names_spec='${libname}${release}.a $libname.a'
-      soname_spec='${libname}${release}${shared_ext}$major'
-    fi
-    shlibpath_var=LIBPATH
-  fi
-  ;;
+fi
+  CXXCPP=$ac_cv_prog_CXXCPP
+else
+  ac_cv_prog_CXXCPP=$CXXCPP
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $CXXCPP" >&5
+$as_echo "$CXXCPP" >&6; }
+ac_preproc_ok=false
+for ac_cxx_preproc_warn_flag in '' yes
+do
+  # Use a header file that comes with gcc, so configuring glibc
+  # with a fresh cross-compiler works.
+  # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+  # <limits.h> exists even on freestanding compilers.
+  # On the NeXT, cc -E runs the code through the compiler's parser,
+  # not just through cpp. "Syntax error" is here to catch this case.
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+		     Syntax error
+_ACEOF
+if ac_fn_cxx_try_cpp "$LINENO"; then :
 
-amigaos*)
-  library_names_spec='$libname.ixlibrary $libname.a'
-  # Create ${libname}_ixlibrary.a entries in /sys/libs.
-  finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
-  ;;
+else
+  # Broken: fails on valid input.
+continue
+fi
+rm -f conftest.err conftest.$ac_ext
 
-beos*)
-  library_names_spec='${libname}${shared_ext}'
-  dynamic_linker="$host_os ld.so"
-  shlibpath_var=LIBRARY_PATH
-  ;;
+  # OK, works on sane cases.  Now check whether nonexistent headers
+  # can be detected and how.
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+#include <ac_nonexistent.h>
+_ACEOF
+if ac_fn_cxx_try_cpp "$LINENO"; then :
+  # Broken: success on invalid input.
+continue
+else
+  # Passes both tests.
+ac_preproc_ok=:
+break
+fi
+rm -f conftest.err conftest.$ac_ext
 
-bsdi[45]*)
-  version_type=linux
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
-  shlibpath_var=LD_LIBRARY_PATH
-  sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
-  sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
-  # the default ld.so.conf also contains /usr/contrib/lib and
-  # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
-  # libtool to hard-code these into programs
-  ;;
+done
+# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
+rm -f conftest.err conftest.$ac_ext
+if $ac_preproc_ok; then :
 
-cygwin* | mingw* | pw32*)
-  version_type=windows
-  shrext_cmds=".dll"
-  need_version=no
-  need_lib_prefix=no
+else
+  { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+_lt_caught_CXX_error=yes; }
+fi
 
-  case $GCC,$host_os in
-  yes,cygwin* | yes,mingw* | yes,pw32*)
-    library_names_spec='$libname.dll.a'
-    # DLL is installed to $(libdir)/../bin by postinstall_cmds
-    postinstall_cmds='base_file=`basename \${file}`~
-      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~
-      dldir=$destdir/`dirname \$dlpath`~
-      test -d \$dldir || mkdir -p \$dldir~
-      $install_prog $dir/$dlname \$dldir/$dlname~
-      chmod a+x \$dldir/$dlname'
-    postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
-      dlpath=$dir/\$dldll~
-       $rm \$dlpath'
-    shlibpath_overrides_runpath=yes
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
 
-    case $host_os in
-    cygwin*)
-      # Cygwin DLLs use 'cyg' prefix rather than 'lib'
-      soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
-      sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib"
-      ;;
-    mingw*)
-      # MinGW DLLs use traditional 'lib' prefix
-      soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
-      sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
-      if echo "$sys_lib_search_path_spec" | grep ';[c-zC-Z]:/' >/dev/null; then
-        # It is most probably a Windows format PATH printed by
-        # mingw gcc, but we are running on Cygwin. Gcc prints its search
-        # path with ; separators, and with drive letters. We can handle the
-        # drive letters (cygwin fileutils understands them), so leave them,
-        # especially as we might pass files found there to a mingw objdump,
-        # which wouldn't understand a cygwinified path. Ahh.
-        sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
-      else
-        sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED  -e "s/$PATH_SEPARATOR/ /g"`
-      fi
-      ;;
-    pw32*)
-      # pw32 DLLs use 'pw' prefix rather than 'lib'
-      library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
-      ;;
-    esac
-    ;;
+else
+  _lt_caught_CXX_error=yes
+fi
 
-  *)
-    library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib'
-    ;;
-  esac
-  dynamic_linker='Win32 ld.exe'
-  # FIXME: first we should search . and the directory the executable is in
-  shlibpath_var=PATH
-  ;;
 
-darwin* | rhapsody*)
-  dynamic_linker="$host_os dyld"
-  version_type=darwin
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext'
-  soname_spec='${libname}${release}${major}$shared_ext'
-  shlibpath_overrides_runpath=yes
-  shlibpath_var=DYLD_LIBRARY_PATH
-  shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
 
-  sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib"
-  sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
-  ;;
 
-dgux*)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  ;;
 
-freebsd1*)
-  dynamic_linker=no
-  ;;
+# Set options
 
-freebsd* | dragonfly*)
-  # DragonFly does not have aout.  When/if they implement a new
-  # versioning mechanism, adjust this.
-  if test -x /usr/bin/objformat; then
-    objformat=`/usr/bin/objformat`
-  else
-    case $host_os in
-    freebsd[123]*) objformat=aout ;;
-    *) objformat=elf ;;
-    esac
-  fi
-  version_type=freebsd-$objformat
-  case $version_type in
-    freebsd-elf*)
-      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
-      need_version=no
-      need_lib_prefix=no
-      ;;
-    freebsd-*)
-      library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
-      need_version=yes
-      ;;
-  esac
-  shlibpath_var=LD_LIBRARY_PATH
-  case $host_os in
-  freebsd2*)
-    shlibpath_overrides_runpath=yes
-    ;;
-  freebsd3.[01]* | freebsdelf3.[01]*)
-    shlibpath_overrides_runpath=yes
-    hardcode_into_libs=yes
-    ;;
-  freebsd3.[2-9]* | freebsdelf3.[2-9]* | \
-  freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1)
-    shlibpath_overrides_runpath=no
-    hardcode_into_libs=yes
-    ;;
-  *) # from 4.6 on, and DragonFly
-    shlibpath_overrides_runpath=yes
-    hardcode_into_libs=yes
-    ;;
-  esac
-  ;;
 
-gnu*)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  hardcode_into_libs=yes
-  ;;
 
-hpux9* | hpux10* | hpux11*)
-  # Give a soname corresponding to the major version so that dld.sl refuses to
-  # link against other versions.
-  version_type=sunos
-  need_lib_prefix=no
-  need_version=no
-  case $host_cpu in
-  ia64*)
-    shrext_cmds='.so'
-    hardcode_into_libs=yes
-    dynamic_linker="$host_os dld.so"
-    shlibpath_var=LD_LIBRARY_PATH
-    shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
-    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-    soname_spec='${libname}${release}${shared_ext}$major'
-    if test "X$HPUX_IA64_MODE" = X32; then
-      sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
-    else
-      sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
-    fi
-    sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
-    ;;
-   hppa*64*)
-     shrext_cmds='.sl'
-     hardcode_into_libs=yes
-     dynamic_linker="$host_os dld.sl"
-     shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
-     shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
-     library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-     soname_spec='${libname}${release}${shared_ext}$major'
-     sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
-     sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
-     ;;
-   *)
-    shrext_cmds='.sl'
-    dynamic_linker="$host_os dld.sl"
-    shlibpath_var=SHLIB_PATH
-    shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
-    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-    soname_spec='${libname}${release}${shared_ext}$major'
-    ;;
-  esac
-  # HP-UX runs *really* slowly unless shared libraries are mode 555.
-  postinstall_cmds='chmod 555 $lib'
-  ;;
+        enable_dlopen=no
 
-interix[3-9]*)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=no
-  hardcode_into_libs=yes
-  ;;
 
-irix5* | irix6* | nonstopux*)
-  case $host_os in
-    nonstopux*) version_type=nonstopux ;;
+
+            # Check whether --enable-shared was given.
+if test "${enable_shared+set}" = set; then :
+  enableval=$enable_shared; p=${PACKAGE-default}
+    case $enableval in
+    yes) enable_shared=yes ;;
+    no) enable_shared=no ;;
     *)
-	if test "$lt_cv_prog_gnu_ld" = yes; then
-		version_type=linux
-	else
-		version_type=irix
-	fi ;;
-  esac
-  need_lib_prefix=no
-  need_version=no
-  soname_spec='${libname}${release}${shared_ext}$major'
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
-  case $host_os in
-  irix5* | nonstopux*)
-    libsuff= shlibsuff=
-    ;;
-  *)
-    case $LD in # libtool.m4 will add one of these switches to LD
-    *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
-      libsuff= shlibsuff= libmagic=32-bit;;
-    *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
-      libsuff=32 shlibsuff=N32 libmagic=N32;;
-    *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
-      libsuff=64 shlibsuff=64 libmagic=64-bit;;
-    *) libsuff= shlibsuff= libmagic=never-match;;
+      enable_shared=no
+      # Look at the argument we got.  We use all the common list separators.
+      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+      for pkg in $enableval; do
+	IFS="$lt_save_ifs"
+	if test "X$pkg" = "X$p"; then
+	  enable_shared=yes
+	fi
+      done
+      IFS="$lt_save_ifs"
+      ;;
     esac
-    ;;
-  esac
-  shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
-  shlibpath_overrides_runpath=no
-  sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
-  sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
-  hardcode_into_libs=yes
-  ;;
+else
+  enable_shared=yes
+fi
 
-# No shared lib support for Linux oldld, aout, or coff.
-linux*oldld* | linux*aout* | linux*coff*)
-  dynamic_linker=no
-  ;;
 
-# This must be Linux ELF.
-linux* | k*bsd*-gnu)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=no
-  # This implies no fast_install, which is unacceptable.
-  # Some rework will be needed to allow for fast_install
-  # before this can be enabled.
-  hardcode_into_libs=yes
 
-  # find out which ABI we are using
-  libsuff=
-  case "$host_cpu" in
-  x86_64*|s390x*|powerpc64*)
-    echo '#line 11170 "configure"' > conftest.$ac_ext
-    if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; then
-      case `/usr/bin/file conftest.$ac_objext` in
-      *64-bit*)
-        libsuff=64
-        ;;
-      esac
-    fi
-    rm -rf conftest*
-    ;;
-  esac
 
-  sys_lib_dlsearch_path_spec="/lib${libsuff} /usr/lib${libsuff}"
 
-  # Append ld.so.conf contents to the search path
-  if test -f /etc/ld.so.conf; then
-    lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ 	]*hwcap[ 	]/d;s/[:,	]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
-    sys_lib_dlsearch_path_spec="$sys_lib_dlsearch_path_spec $lt_ld_extra"
-  fi
 
-  # We used to test for /lib/ld.so.1 and disable shared libraries on
-  # powerpc, because MkLinux only supported shared libraries with the
-  # GNU dynamic linker.  Since this was broken with cross compilers,
-  # most powerpc-linux boxes support dynamic linking these days and
-  # people can always --disable-shared, the test was removed, and we
-  # assume the GNU/Linux dynamic linker is in use.
-  dynamic_linker='GNU/Linux ld.so'
-  ;;
 
-netbsd*)
-  version_type=sunos
-  need_lib_prefix=no
-  need_version=no
-  if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
-    finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
-    dynamic_linker='NetBSD (a.out) ld.so'
-  else
-    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
-    soname_spec='${libname}${release}${shared_ext}$major'
-    dynamic_linker='NetBSD ld.elf_so'
-  fi
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
-  hardcode_into_libs=yes
-  ;;
 
-newsos6)
-  version_type=linux
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
-  ;;
 
-nto-qnx*)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
-  ;;
+  # Check whether --enable-static was given.
+if test "${enable_static+set}" = set; then :
+  enableval=$enable_static; p=${PACKAGE-default}
+    case $enableval in
+    yes) enable_static=yes ;;
+    no) enable_static=no ;;
+    *)
+     enable_static=no
+      # Look at the argument we got.  We use all the common list separators.
+      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+      for pkg in $enableval; do
+	IFS="$lt_save_ifs"
+	if test "X$pkg" = "X$p"; then
+	  enable_static=yes
+	fi
+      done
+      IFS="$lt_save_ifs"
+      ;;
+    esac
+else
+  enable_static=yes
+fi
 
-openbsd*)
-  version_type=sunos
-  sys_lib_dlsearch_path_spec="/usr/lib"
-  need_lib_prefix=no
-  # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
-  case $host_os in
-    openbsd3.3 | openbsd3.3.*) need_version=yes ;;
-    *)                         need_version=no  ;;
-  esac
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
-  finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
-  shlibpath_var=LD_LIBRARY_PATH
-  if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-    case $host_os in
-      openbsd2.[89] | openbsd2.[89].*)
-	shlibpath_overrides_runpath=no
-	;;
-      *)
-	shlibpath_overrides_runpath=yes
-	;;
-      esac
-  else
-    shlibpath_overrides_runpath=yes
-  fi
-  ;;
 
-os2*)
-  libname_spec='$name'
-  shrext_cmds=".dll"
-  need_lib_prefix=no
-  library_names_spec='$libname${shared_ext} $libname.a'
-  dynamic_linker='OS/2 ld.exe'
-  shlibpath_var=LIBPATH
-  ;;
 
-osf3* | osf4* | osf5*)
-  version_type=osf
-  need_lib_prefix=no
-  need_version=no
-  soname_spec='${libname}${release}${shared_ext}$major'
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  shlibpath_var=LD_LIBRARY_PATH
-  sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
-  sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
-  ;;
 
-rdos*)
-  dynamic_linker=no
-  ;;
 
-solaris*)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
-  hardcode_into_libs=yes
-  # ldd complains unless libraries are executable
-  postinstall_cmds='chmod +x $lib'
-  ;;
 
-sunos4*)
-  version_type=sunos
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
-  finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
-  if test "$with_gnu_ld" = yes; then
-    need_lib_prefix=no
-  fi
-  need_version=yes
-  ;;
 
-sysv4 | sysv4.3*)
-  version_type=linux
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  case $host_vendor in
-    sni)
-      shlibpath_overrides_runpath=no
-      need_lib_prefix=no
-      export_dynamic_flag_spec='${wl}-Blargedynsym'
-      runpath_var=LD_RUN_PATH
-      ;;
-    siemens)
-      need_lib_prefix=no
-      ;;
-    motorola)
-      need_lib_prefix=no
-      need_version=no
-      shlibpath_overrides_runpath=no
-      sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
-      ;;
-  esac
-  ;;
 
-sysv4*MP*)
-  if test -d /usr/nec ;then
-    version_type=linux
-    library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
-    soname_spec='$libname${shared_ext}.$major'
-    shlibpath_var=LD_LIBRARY_PATH
-  fi
-  ;;
 
-sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
-  version_type=freebsd-elf
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  hardcode_into_libs=yes
-  if test "$with_gnu_ld" = yes; then
-    sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
-    shlibpath_overrides_runpath=no
-  else
-    sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
-    shlibpath_overrides_runpath=yes
-    case $host_os in
-      sco3.2v5*)
-        sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
-	;;
-    esac
-  fi
-  sys_lib_dlsearch_path_spec='/usr/lib'
-  ;;
 
-uts4*)
-  version_type=linux
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  ;;
+# Check whether --with-pic was given.
+if test "${with_pic+set}" = set; then :
+  withval=$with_pic; pic_mode="$withval"
+else
+  pic_mode=default
+fi
 
-*)
-  dynamic_linker=no
-  ;;
-esac
-{ $as_echo "$as_me:$LINENO: result: $dynamic_linker" >&5
-$as_echo "$dynamic_linker" >&6; }
-test "$dynamic_linker" = no && can_build_shared=no
 
-if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
-  lt_cv_sys_lib_search_path_spec="$sys_lib_search_path_spec"
-fi
+test -z "$pic_mode" && pic_mode=default
 
-sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec"
-if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
-  lt_cv_sys_lib_dlsearch_path_spec="$sys_lib_dlsearch_path_spec"
-fi
 
-sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec"
 
-variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
-if test "$GCC" = yes; then
-  variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
-fi
 
-{ $as_echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5
-$as_echo_n "checking how to hardcode library paths into programs... " >&6; }
-hardcode_action=
-if test -n "$hardcode_libdir_flag_spec" || \
-   test -n "$runpath_var" || \
-   test "X$hardcode_automatic" = "Xyes" ; then
 
-  # We can hardcode non-existant directories.
-  if test "$hardcode_direct" != no &&
-     # If the only mechanism to avoid hardcoding is shlibpath_var, we
-     # have to relink, otherwise we might link with an installed library
-     # when we should be linking with a yet-to-be-installed one
-     ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, )" != no &&
-     test "$hardcode_minus_L" != no; then
-    # Linking always hardcodes the temporary library directory.
-    hardcode_action=relink
-  else
-    # We can link without hardcoding, and we can hardcode nonexisting dirs.
-    hardcode_action=immediate
-  fi
-else
-  # We cannot hardcode anything, or else we can only hardcode existing
-  # directories.
-  hardcode_action=unsupported
-fi
-{ $as_echo "$as_me:$LINENO: result: $hardcode_action" >&5
-$as_echo "$hardcode_action" >&6; }
 
-if test "$hardcode_action" = relink; then
-  # Fast installation is not supported
-  enable_fast_install=no
-elif test "$shlibpath_overrides_runpath" = yes ||
-     test "$enable_shared" = no; then
-  # Fast installation is not necessary
-  enable_fast_install=needless
-fi
 
-striplib=
-old_striplib=
-{ $as_echo "$as_me:$LINENO: checking whether stripping libraries is possible" >&5
-$as_echo_n "checking whether stripping libraries is possible... " >&6; }
-if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then
-  test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
-  test -z "$striplib" && striplib="$STRIP --strip-unneeded"
-  { $as_echo "$as_me:$LINENO: result: yes" >&5
-$as_echo "yes" >&6; }
+  # Check whether --enable-fast-install was given.
+if test "${enable_fast_install+set}" = set; then :
+  enableval=$enable_fast_install; p=${PACKAGE-default}
+    case $enableval in
+    yes) enable_fast_install=yes ;;
+    no) enable_fast_install=no ;;
+    *)
+      enable_fast_install=no
+      # Look at the argument we got.  We use all the common list separators.
+      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+      for pkg in $enableval; do
+	IFS="$lt_save_ifs"
+	if test "X$pkg" = "X$p"; then
+	  enable_fast_install=yes
+	fi
+      done
+      IFS="$lt_save_ifs"
+      ;;
+    esac
 else
-# FIXME - insert some real tests, host_os isn't really good enough
-  case $host_os in
-   darwin*)
-       if test -n "$STRIP" ; then
-         striplib="$STRIP -x"
-         old_striplib="$STRIP -S"
-         { $as_echo "$as_me:$LINENO: result: yes" >&5
-$as_echo "yes" >&6; }
-       else
-  { $as_echo "$as_me:$LINENO: result: no" >&5
-$as_echo "no" >&6; }
-fi
-       ;;
-   *)
-  { $as_echo "$as_me:$LINENO: result: no" >&5
-$as_echo "no" >&6; }
-    ;;
-  esac
+  enable_fast_install=yes
 fi
 
-if test "x$enable_dlopen" != xyes; then
-  enable_dlopen=unknown
-  enable_dlopen_self=unknown
-  enable_dlopen_self_static=unknown
-else
-  lt_cv_dlopen=no
-  lt_cv_dlopen_libs=
 
-  case $host_os in
-  beos*)
-    lt_cv_dlopen="load_add_on"
-    lt_cv_dlopen_libs=
-    lt_cv_dlopen_self=yes
-    ;;
 
-  mingw* | pw32*)
-    lt_cv_dlopen="LoadLibrary"
-    lt_cv_dlopen_libs=
-   ;;
 
-  cygwin*)
-    lt_cv_dlopen="dlopen"
-    lt_cv_dlopen_libs=
-   ;;
 
-  darwin*)
-  # if libdl is installed we need to link against it
-    { $as_echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5
-$as_echo_n "checking for dlopen in -ldl... " >&6; }
-if test "${ac_cv_lib_dl_dlopen+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
-  ac_check_lib_save_LIBS=$LIBS
-LIBS="-ldl  $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
 
-/* Override any GCC internal prototype to avoid an error.
-   Use char because int might match the return type of a GCC
-   builtin and then its argument prototype would still apply.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-char dlopen ();
-int
-main ()
-{
-return dlopen ();
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_link") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest$ac_exeext && {
-	 test "$cross_compiling" = yes ||
-	 $as_test_x conftest$ac_exeext
-       }; then
-  ac_cv_lib_dl_dlopen=yes
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
 
-	ac_cv_lib_dl_dlopen=no
-fi
 
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-      conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5
-$as_echo "$ac_cv_lib_dl_dlopen" >&6; }
-if test "x$ac_cv_lib_dl_dlopen" = x""yes; then
-  lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
-else
 
-    lt_cv_dlopen="dyld"
-    lt_cv_dlopen_libs=
-    lt_cv_dlopen_self=yes
 
-fi
 
-   ;;
+# This can be used to rebuild libtool when needed
+LIBTOOL_DEPS="$ltmain"
 
-  *)
-    { $as_echo "$as_me:$LINENO: checking for shl_load" >&5
-$as_echo_n "checking for shl_load... " >&6; }
-if test "${ac_cv_func_shl_load+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-/* Define shl_load to an innocuous variant, in case <limits.h> declares shl_load.
-   For example, HP-UX 11i <limits.h> declares gettimeofday.  */
-#define shl_load innocuous_shl_load
+# Always use our own libtool.
+LIBTOOL='$(SHELL) $(top_builddir)/libtool'
 
-/* System header to define __stub macros and hopefully few prototypes,
-    which can conflict with char shl_load (); below.
-    Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-    <limits.h> exists even on freestanding compilers.  */
 
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
 
-#undef shl_load
 
-/* Override any GCC internal prototype to avoid an error.
-   Use char because int might match the return type of a GCC
-   builtin and then its argument prototype would still apply.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-char shl_load ();
-/* The GNU C library defines this for functions which it implements
-    to always fail with ENOSYS.  Some functions are actually named
-    something starting with __ and the normal name is an alias.  */
-#if defined __stub_shl_load || defined __stub___shl_load
-choke me
-#endif
 
-int
-main ()
-{
-return shl_load ();
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_link") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest$ac_exeext && {
-	 test "$cross_compiling" = yes ||
-	 $as_test_x conftest$ac_exeext
-       }; then
-  ac_cv_func_shl_load=yes
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
 
-	ac_cv_func_shl_load=no
-fi
 
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-      conftest$ac_exeext conftest.$ac_ext
-fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_func_shl_load" >&5
-$as_echo "$ac_cv_func_shl_load" >&6; }
-if test "x$ac_cv_func_shl_load" = x""yes; then
-  lt_cv_dlopen="shl_load"
-else
-  { $as_echo "$as_me:$LINENO: checking for shl_load in -ldld" >&5
-$as_echo_n "checking for shl_load in -ldld... " >&6; }
-if test "${ac_cv_lib_dld_shl_load+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
-  ac_check_lib_save_LIBS=$LIBS
-LIBS="-ldld  $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
 
-/* Override any GCC internal prototype to avoid an error.
-   Use char because int might match the return type of a GCC
-   builtin and then its argument prototype would still apply.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-char shl_load ();
-int
-main ()
-{
-return shl_load ();
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_link") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest$ac_exeext && {
-	 test "$cross_compiling" = yes ||
-	 $as_test_x conftest$ac_exeext
-       }; then
-  ac_cv_lib_dld_shl_load=yes
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
 
-	ac_cv_lib_dld_shl_load=no
-fi
 
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-      conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_dld_shl_load" >&5
-$as_echo "$ac_cv_lib_dld_shl_load" >&6; }
-if test "x$ac_cv_lib_dld_shl_load" = x""yes; then
-  lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld"
-else
-  { $as_echo "$as_me:$LINENO: checking for dlopen" >&5
-$as_echo_n "checking for dlopen... " >&6; }
-if test "${ac_cv_func_dlopen+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-/* Define dlopen to an innocuous variant, in case <limits.h> declares dlopen.
-   For example, HP-UX 11i <limits.h> declares gettimeofday.  */
-#define dlopen innocuous_dlopen
 
-/* System header to define __stub macros and hopefully few prototypes,
-    which can conflict with char dlopen (); below.
-    Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-    <limits.h> exists even on freestanding compilers.  */
 
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
-
-#undef dlopen
-
-/* Override any GCC internal prototype to avoid an error.
-   Use char because int might match the return type of a GCC
-   builtin and then its argument prototype would still apply.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-char dlopen ();
-/* The GNU C library defines this for functions which it implements
-    to always fail with ENOSYS.  Some functions are actually named
-    something starting with __ and the normal name is an alias.  */
-#if defined __stub_dlopen || defined __stub___dlopen
-choke me
-#endif
 
-int
-main ()
-{
-return dlopen ();
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_link") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest$ac_exeext && {
-	 test "$cross_compiling" = yes ||
-	 $as_test_x conftest$ac_exeext
-       }; then
-  ac_cv_func_dlopen=yes
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
 
-	ac_cv_func_dlopen=no
-fi
 
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-      conftest$ac_exeext conftest.$ac_ext
-fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_func_dlopen" >&5
-$as_echo "$ac_cv_func_dlopen" >&6; }
-if test "x$ac_cv_func_dlopen" = x""yes; then
-  lt_cv_dlopen="dlopen"
-else
-  { $as_echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5
-$as_echo_n "checking for dlopen in -ldl... " >&6; }
-if test "${ac_cv_lib_dl_dlopen+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
-  ac_check_lib_save_LIBS=$LIBS
-LIBS="-ldl  $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
 
-/* Override any GCC internal prototype to avoid an error.
-   Use char because int might match the return type of a GCC
-   builtin and then its argument prototype would still apply.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-char dlopen ();
-int
-main ()
-{
-return dlopen ();
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_link") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest$ac_exeext && {
-	 test "$cross_compiling" = yes ||
-	 $as_test_x conftest$ac_exeext
-       }; then
-  ac_cv_lib_dl_dlopen=yes
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
 
-	ac_cv_lib_dl_dlopen=no
-fi
 
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-      conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5
-$as_echo "$ac_cv_lib_dl_dlopen" >&6; }
-if test "x$ac_cv_lib_dl_dlopen" = x""yes; then
-  lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
-else
-  { $as_echo "$as_me:$LINENO: checking for dlopen in -lsvld" >&5
-$as_echo_n "checking for dlopen in -lsvld... " >&6; }
-if test "${ac_cv_lib_svld_dlopen+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
-  ac_check_lib_save_LIBS=$LIBS
-LIBS="-lsvld  $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
 
-/* Override any GCC internal prototype to avoid an error.
-   Use char because int might match the return type of a GCC
-   builtin and then its argument prototype would still apply.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-char dlopen ();
-int
-main ()
-{
-return dlopen ();
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_link") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest$ac_exeext && {
-	 test "$cross_compiling" = yes ||
-	 $as_test_x conftest$ac_exeext
-       }; then
-  ac_cv_lib_svld_dlopen=yes
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
 
-	ac_cv_lib_svld_dlopen=no
-fi
 
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-      conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_svld_dlopen" >&5
-$as_echo "$ac_cv_lib_svld_dlopen" >&6; }
-if test "x$ac_cv_lib_svld_dlopen" = x""yes; then
-  lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"
-else
-  { $as_echo "$as_me:$LINENO: checking for dld_link in -ldld" >&5
-$as_echo_n "checking for dld_link in -ldld... " >&6; }
-if test "${ac_cv_lib_dld_dld_link+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
-  ac_check_lib_save_LIBS=$LIBS
-LIBS="-ldld  $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
 
-/* Override any GCC internal prototype to avoid an error.
-   Use char because int might match the return type of a GCC
-   builtin and then its argument prototype would still apply.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-char dld_link ();
-int
-main ()
-{
-return dld_link ();
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_link") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest$ac_exeext && {
-	 test "$cross_compiling" = yes ||
-	 $as_test_x conftest$ac_exeext
-       }; then
-  ac_cv_lib_dld_dld_link=yes
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
 
-	ac_cv_lib_dld_dld_link=no
-fi
 
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-      conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_dld_dld_link" >&5
-$as_echo "$ac_cv_lib_dld_dld_link" >&6; }
-if test "x$ac_cv_lib_dld_dld_link" = x""yes; then
-  lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld"
-fi
 
+test -z "$LN_S" && LN_S="ln -s"
 
-fi
 
 
-fi
 
 
-fi
 
 
-fi
 
 
-fi
 
-    ;;
-  esac
 
-  if test "x$lt_cv_dlopen" != xno; then
-    enable_dlopen=yes
-  else
-    enable_dlopen=no
-  fi
 
-  case $lt_cv_dlopen in
-  dlopen)
-    save_CPPFLAGS="$CPPFLAGS"
-    test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
 
-    save_LDFLAGS="$LDFLAGS"
-    wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
 
-    save_LIBS="$LIBS"
-    LIBS="$lt_cv_dlopen_libs $LIBS"
+if test -n "${ZSH_VERSION+set}" ; then
+   setopt NO_GLOB_SUBST
+fi
 
-    { $as_echo "$as_me:$LINENO: checking whether a program can dlopen itself" >&5
-$as_echo_n "checking whether a program can dlopen itself... " >&6; }
-if test "${lt_cv_dlopen_self+set}" = set; then
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for objdir" >&5
+$as_echo_n "checking for objdir... " >&6; }
+if test "${lt_cv_objdir+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
-  	  if test "$cross_compiling" = yes; then :
-  lt_cv_dlopen_self=cross
+  rm -f .libs 2>/dev/null
+mkdir .libs 2>/dev/null
+if test -d .libs; then
+  lt_cv_objdir=.libs
 else
-  lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
-  lt_status=$lt_dlunknown
-  cat > conftest.$ac_ext <<EOF
-#line 12071 "configure"
-#include "confdefs.h"
+  # MS-DOS does not allow filenames that begin with a dot.
+  lt_cv_objdir=_libs
+fi
+rmdir .libs 2>/dev/null
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_objdir" >&5
+$as_echo "$lt_cv_objdir" >&6; }
+objdir=$lt_cv_objdir
 
-#if HAVE_DLFCN_H
-#include <dlfcn.h>
-#endif
 
-#include <stdio.h>
 
-#ifdef RTLD_GLOBAL
-#  define LT_DLGLOBAL		RTLD_GLOBAL
-#else
-#  ifdef DL_GLOBAL
-#    define LT_DLGLOBAL		DL_GLOBAL
-#  else
-#    define LT_DLGLOBAL		0
-#  endif
-#endif
 
-/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
-   find out it does not work in some platform. */
-#ifndef LT_DLLAZY_OR_NOW
-#  ifdef RTLD_LAZY
-#    define LT_DLLAZY_OR_NOW		RTLD_LAZY
-#  else
-#    ifdef DL_LAZY
-#      define LT_DLLAZY_OR_NOW		DL_LAZY
-#    else
-#      ifdef RTLD_NOW
-#        define LT_DLLAZY_OR_NOW	RTLD_NOW
-#      else
-#        ifdef DL_NOW
-#          define LT_DLLAZY_OR_NOW	DL_NOW
-#        else
-#          define LT_DLLAZY_OR_NOW	0
-#        endif
-#      endif
-#    endif
-#  endif
-#endif
 
-#ifdef __cplusplus
-extern "C" void exit (int);
-#endif
+cat >>confdefs.h <<_ACEOF
+#define LT_OBJDIR "$lt_cv_objdir/"
+_ACEOF
 
-void fnord() { int i=42;}
-int main ()
-{
-  void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
-  int status = $lt_dlunknown;
 
-  if (self)
-    {
-      if (dlsym (self,"fnord"))       status = $lt_dlno_uscore;
-      else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
-      /* dlclose (self); */
-    }
-  else
-    puts (dlerror ());
-
-    exit (status);
-}
-EOF
-  if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then
-    (./conftest; exit; ) >&5 2>/dev/null
-    lt_status=$?
-    case x$lt_status in
-      x$lt_dlno_uscore) lt_cv_dlopen_self=yes ;;
-      x$lt_dlneed_uscore) lt_cv_dlopen_self=yes ;;
-      x$lt_dlunknown|x*) lt_cv_dlopen_self=no ;;
-    esac
-  else :
-    # compilation failed
-    lt_cv_dlopen_self=no
-  fi
-fi
-rm -fr conftest*
-
-
-fi
-{ $as_echo "$as_me:$LINENO: result: $lt_cv_dlopen_self" >&5
-$as_echo "$lt_cv_dlopen_self" >&6; }
-
-    if test "x$lt_cv_dlopen_self" = xyes; then
-      wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\"
-      { $as_echo "$as_me:$LINENO: checking whether a statically linked program can dlopen itself" >&5
-$as_echo_n "checking whether a statically linked program can dlopen itself... " >&6; }
-if test "${lt_cv_dlopen_self_static+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
-  	  if test "$cross_compiling" = yes; then :
-  lt_cv_dlopen_self_static=cross
-else
-  lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
-  lt_status=$lt_dlunknown
-  cat > conftest.$ac_ext <<EOF
-#line 12171 "configure"
-#include "confdefs.h"
-
-#if HAVE_DLFCN_H
-#include <dlfcn.h>
-#endif
-
-#include <stdio.h>
 
-#ifdef RTLD_GLOBAL
-#  define LT_DLGLOBAL		RTLD_GLOBAL
-#else
-#  ifdef DL_GLOBAL
-#    define LT_DLGLOBAL		DL_GLOBAL
-#  else
-#    define LT_DLGLOBAL		0
-#  endif
-#endif
 
-/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
-   find out it does not work in some platform. */
-#ifndef LT_DLLAZY_OR_NOW
-#  ifdef RTLD_LAZY
-#    define LT_DLLAZY_OR_NOW		RTLD_LAZY
-#  else
-#    ifdef DL_LAZY
-#      define LT_DLLAZY_OR_NOW		DL_LAZY
-#    else
-#      ifdef RTLD_NOW
-#        define LT_DLLAZY_OR_NOW	RTLD_NOW
-#      else
-#        ifdef DL_NOW
-#          define LT_DLLAZY_OR_NOW	DL_NOW
-#        else
-#          define LT_DLLAZY_OR_NOW	0
-#        endif
-#      endif
-#    endif
-#  endif
-#endif
 
-#ifdef __cplusplus
-extern "C" void exit (int);
-#endif
 
-void fnord() { int i=42;}
-int main ()
-{
-  void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
-  int status = $lt_dlunknown;
 
-  if (self)
-    {
-      if (dlsym (self,"fnord"))       status = $lt_dlno_uscore;
-      else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
-      /* dlclose (self); */
-    }
-  else
-    puts (dlerror ());
 
-    exit (status);
-}
-EOF
-  if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
-  ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then
-    (./conftest; exit; ) >&5 2>/dev/null
-    lt_status=$?
-    case x$lt_status in
-      x$lt_dlno_uscore) lt_cv_dlopen_self_static=yes ;;
-      x$lt_dlneed_uscore) lt_cv_dlopen_self_static=yes ;;
-      x$lt_dlunknown|x*) lt_cv_dlopen_self_static=no ;;
-    esac
-  else :
-    # compilation failed
-    lt_cv_dlopen_self_static=no
-  fi
-fi
-rm -fr conftest*
 
 
-fi
-{ $as_echo "$as_me:$LINENO: result: $lt_cv_dlopen_self_static" >&5
-$as_echo "$lt_cv_dlopen_self_static" >&6; }
-    fi
 
-    CPPFLAGS="$save_CPPFLAGS"
-    LDFLAGS="$save_LDFLAGS"
-    LIBS="$save_LIBS"
-    ;;
-  esac
 
-  case $lt_cv_dlopen_self in
-  yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;;
-  *) enable_dlopen_self=unknown ;;
-  esac
 
-  case $lt_cv_dlopen_self_static in
-  yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;;
-  *) enable_dlopen_self_static=unknown ;;
-  esac
-fi
 
 
-# Report which library types will actually be built
-{ $as_echo "$as_me:$LINENO: checking if libtool supports shared libraries" >&5
-$as_echo_n "checking if libtool supports shared libraries... " >&6; }
-{ $as_echo "$as_me:$LINENO: result: $can_build_shared" >&5
-$as_echo "$can_build_shared" >&6; }
 
-{ $as_echo "$as_me:$LINENO: checking whether to build shared libraries" >&5
-$as_echo_n "checking whether to build shared libraries... " >&6; }
-test "$can_build_shared" = "no" && enable_shared=no
 
-# On AIX, shared libraries and static libraries use the same namespace, and
-# are all built from PIC.
 case $host_os in
 aix3*)
-  test "$enable_shared" = yes && enable_static=no
-  if test -n "$RANLIB"; then
-    archive_cmds="$archive_cmds~\$RANLIB \$lib"
-    postinstall_cmds='$RANLIB $lib'
+  # AIX sometimes has problems with the GCC collect2 program.  For some
+  # reason, if we set the COLLECT_NAMES environment variable, the problems
+  # vanish in a puff of smoke.
+  if test "X${COLLECT_NAMES+set}" != Xset; then
+    COLLECT_NAMES=
+    export COLLECT_NAMES
   fi
   ;;
-
-aix[4-9]*)
-  if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
-    test "$enable_shared" = yes && enable_static=no
-  fi
-    ;;
 esac
-{ $as_echo "$as_me:$LINENO: result: $enable_shared" >&5
-$as_echo "$enable_shared" >&6; }
-
-{ $as_echo "$as_me:$LINENO: checking whether to build static libraries" >&5
-$as_echo_n "checking whether to build static libraries... " >&6; }
-# Make sure either enable_shared or enable_static is yes.
-test "$enable_shared" = yes || enable_static=yes
-{ $as_echo "$as_me:$LINENO: result: $enable_static" >&5
-$as_echo "$enable_static" >&6; }
 
-# The else clause should only fire when bootstrapping the
-# libtool distribution, otherwise you forgot to ship ltmain.sh
-# with your package, and you will get complaints that there are
-# no rules to generate ltmain.sh.
-if test -f "$ltmain"; then
-  # See if we are running on zsh, and set the options which allow our commands through
-  # without removal of \ escapes.
-  if test -n "${ZSH_VERSION+set}" ; then
-    setopt NO_GLOB_SUBST
-  fi
-  # Now quote all the things that may contain metacharacters while being
-  # careful not to overquote the AC_SUBSTed values.  We take copies of the
-  # variables and quote the copies for generation of the libtool script.
-  for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \
-    SED SHELL STRIP \
-    libname_spec library_names_spec soname_spec extract_expsyms_cmds \
-    old_striplib striplib file_magic_cmd finish_cmds finish_eval \
-    deplibs_check_method reload_flag reload_cmds need_locks \
-    lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \
-    lt_cv_sys_global_symbol_to_c_name_address \
-    sys_lib_search_path_spec sys_lib_dlsearch_path_spec \
-    old_postinstall_cmds old_postuninstall_cmds \
-    compiler \
-    CC \
-    LD \
-    lt_prog_compiler_wl \
-    lt_prog_compiler_pic \
-    lt_prog_compiler_static \
-    lt_prog_compiler_no_builtin_flag \
-    export_dynamic_flag_spec \
-    thread_safe_flag_spec \
-    whole_archive_flag_spec \
-    enable_shared_with_static_runtimes \
-    old_archive_cmds \
-    old_archive_from_new_cmds \
-    predep_objects \
-    postdep_objects \
-    predeps \
-    postdeps \
-    compiler_lib_search_path \
-    compiler_lib_search_dirs \
-    archive_cmds \
-    archive_expsym_cmds \
-    postinstall_cmds \
-    postuninstall_cmds \
-    old_archive_from_expsyms_cmds \
-    allow_undefined_flag \
-    no_undefined_flag \
-    export_symbols_cmds \
-    hardcode_libdir_flag_spec \
-    hardcode_libdir_flag_spec_ld \
-    hardcode_libdir_separator \
-    hardcode_automatic \
-    module_cmds \
-    module_expsym_cmds \
-    lt_cv_prog_compiler_c_o \
-    fix_srcfile_path \
-    exclude_expsyms \
-    include_expsyms; do
-
-    case $var in
-    old_archive_cmds | \
-    old_archive_from_new_cmds | \
-    archive_cmds | \
-    archive_expsym_cmds | \
-    module_cmds | \
-    module_expsym_cmds | \
-    old_archive_from_expsyms_cmds | \
-    export_symbols_cmds | \
-    extract_expsyms_cmds | reload_cmds | finish_cmds | \
-    postinstall_cmds | postuninstall_cmds | \
-    old_postinstall_cmds | old_postuninstall_cmds | \
-    sys_lib_search_path_spec | sys_lib_dlsearch_path_spec)
-      # Double-quote double-evaled strings.
-      eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\""
-      ;;
-    *)
-      eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\""
-      ;;
-    esac
-  done
+# Sed substitution that helps us do robust quoting.  It backslashifies
+# metacharacters that are still active within double-quoted strings.
+sed_quote_subst='s/\(["`$\\]\)/\\\1/g'
 
-  case $lt_echo in
-  *'\$0 --fallback-echo"')
-    lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'`
-    ;;
-  esac
+# Same as above, but do not quote variable references.
+double_quote_subst='s/\(["`\\]\)/\\\1/g'
 
-cfgfile="${ofile}T"
-  trap "$rm \"$cfgfile\"; exit 1" 1 2 15
-  $rm -f "$cfgfile"
-  { $as_echo "$as_me:$LINENO: creating $ofile" >&5
-$as_echo "$as_me: creating $ofile" >&6;}
+# Sed substitution to delay expansion of an escaped shell variable in a
+# double_quote_subst'ed string.
+delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
 
-  cat <<__EOF__ >> "$cfgfile"
-#! $SHELL
+# Sed substitution to delay expansion of an escaped single quote.
+delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g'
 
-# `$echo "$cfgfile" | sed 's%^.*/%%'` - Provide generalized library-building support services.
-# Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP)
-# NOTE: Changes made to this file will be lost: look at ltmain.sh.
-#
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008
-# Free Software Foundation, Inc.
-#
-# This file is part of GNU Libtool:
-# Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
-#
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
+# Sed substitution to avoid accidental globbing in evaled expressions
+no_glob_subst='s/\*/\\\*/g'
 
-# A sed program that does not truncate output.
-SED=$lt_SED
+# Global variables:
+ofile=libtool
+can_build_shared=yes
 
-# Sed that helps us avoid accidentally triggering echo(1) options like -n.
-Xsed="$SED -e 1s/^X//"
+# All known linkers require a `.a' archive for static linking (except MSVC,
+# which needs '.lib').
+libext=a
 
-# The HP-UX ksh and POSIX shell print the target directory to stdout
-# if CDPATH is set.
-(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+with_gnu_ld="$lt_cv_prog_gnu_ld"
 
-# The names of the tagged configurations supported by this script.
-available_tags=
+old_CC="$CC"
+old_CFLAGS="$CFLAGS"
 
-# ### BEGIN LIBTOOL CONFIG
+# Set sane defaults for various variables
+test -z "$CC" && CC=cc
+test -z "$LTCC" && LTCC=$CC
+test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS
+test -z "$LD" && LD=ld
+test -z "$ac_objext" && ac_objext=o
 
-# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
+for cc_temp in $compiler""; do
+  case $cc_temp in
+    compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
+    distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
+    \-*) ;;
+    *) break;;
+  esac
+done
+cc_basename=`$ECHO "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
 
-# Shell to use when invoking shell scripts.
-SHELL=$lt_SHELL
 
-# Whether or not to build shared libraries.
-build_libtool_libs=$enable_shared
+# Only perform the check for file, if the check method requires it
+test -z "$MAGIC_CMD" && MAGIC_CMD=file
+case $deplibs_check_method in
+file_magic*)
+  if test "$file_magic_cmd" = '$MAGIC_CMD'; then
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ${ac_tool_prefix}file" >&5
+$as_echo_n "checking for ${ac_tool_prefix}file... " >&6; }
+if test "${lt_cv_path_MAGIC_CMD+set}" = set; then :
+  $as_echo_n "(cached) " >&6
+else
+  case $MAGIC_CMD in
+[\\/*] |  ?:[\\/]*)
+  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
+  ;;
+*)
+  lt_save_MAGIC_CMD="$MAGIC_CMD"
+  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+  ac_dummy="/usr/bin$PATH_SEPARATOR$PATH"
+  for ac_dir in $ac_dummy; do
+    IFS="$lt_save_ifs"
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/${ac_tool_prefix}file; then
+      lt_cv_path_MAGIC_CMD="$ac_dir/${ac_tool_prefix}file"
+      if test -n "$file_magic_test_file"; then
+	case $deplibs_check_method in
+	"file_magic "*)
+	  file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
+	  MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+	  if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
+	    $EGREP "$file_magic_regex" > /dev/null; then
+	    :
+	  else
+	    cat <<_LT_EOF 1>&2
 
-# Whether or not to build static libraries.
-build_old_libs=$enable_static
+*** Warning: the command libtool uses to detect shared libraries,
+*** $file_magic_cmd, produces output that libtool cannot recognize.
+*** The result is that libtool may fail to recognize shared libraries
+*** as such.  This will affect the creation of libtool libraries that
+*** depend on shared libraries, but programs linked with such libtool
+*** libraries will work regardless of this problem.  Nevertheless, you
+*** may want to report the problem to your system manager and/or to
+*** bug-libtool@gnu.org
 
-# Whether or not to add -lc for building shared libraries.
-build_libtool_need_lc=$archive_cmds_need_lc
+_LT_EOF
+	  fi ;;
+	esac
+      fi
+      break
+    fi
+  done
+  IFS="$lt_save_ifs"
+  MAGIC_CMD="$lt_save_MAGIC_CMD"
+  ;;
+esac
+fi
 
-# Whether or not to disallow shared libs when runtime libs are static
-allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes
-
-# Whether or not to optimize for fast installation.
-fast_install=$enable_fast_install
-
-# The host system.
-host_alias=$host_alias
-host=$host
-host_os=$host_os
+MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+if test -n "$MAGIC_CMD"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MAGIC_CMD" >&5
+$as_echo "$MAGIC_CMD" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
 
-# The build system.
-build_alias=$build_alias
-build=$build
-build_os=$build_os
 
-# An echo program that does not interpret backslashes.
-echo=$lt_echo
 
-# The archiver.
-AR=$lt_AR
-AR_FLAGS=$lt_AR_FLAGS
 
-# A C compiler.
-LTCC=$lt_LTCC
 
-# LTCC compiler flags.
-LTCFLAGS=$lt_LTCFLAGS
+if test -z "$lt_cv_path_MAGIC_CMD"; then
+  if test -n "$ac_tool_prefix"; then
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for file" >&5
+$as_echo_n "checking for file... " >&6; }
+if test "${lt_cv_path_MAGIC_CMD+set}" = set; then :
+  $as_echo_n "(cached) " >&6
+else
+  case $MAGIC_CMD in
+[\\/*] |  ?:[\\/]*)
+  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
+  ;;
+*)
+  lt_save_MAGIC_CMD="$MAGIC_CMD"
+  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+  ac_dummy="/usr/bin$PATH_SEPARATOR$PATH"
+  for ac_dir in $ac_dummy; do
+    IFS="$lt_save_ifs"
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/file; then
+      lt_cv_path_MAGIC_CMD="$ac_dir/file"
+      if test -n "$file_magic_test_file"; then
+	case $deplibs_check_method in
+	"file_magic "*)
+	  file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
+	  MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+	  if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
+	    $EGREP "$file_magic_regex" > /dev/null; then
+	    :
+	  else
+	    cat <<_LT_EOF 1>&2
 
-# A language-specific compiler.
-CC=$lt_compiler
+*** Warning: the command libtool uses to detect shared libraries,
+*** $file_magic_cmd, produces output that libtool cannot recognize.
+*** The result is that libtool may fail to recognize shared libraries
+*** as such.  This will affect the creation of libtool libraries that
+*** depend on shared libraries, but programs linked with such libtool
+*** libraries will work regardless of this problem.  Nevertheless, you
+*** may want to report the problem to your system manager and/or to
+*** bug-libtool@gnu.org
 
-# Is the compiler the GNU C compiler?
-with_gcc=$GCC
+_LT_EOF
+	  fi ;;
+	esac
+      fi
+      break
+    fi
+  done
+  IFS="$lt_save_ifs"
+  MAGIC_CMD="$lt_save_MAGIC_CMD"
+  ;;
+esac
+fi
 
-# An ERE matcher.
-EGREP=$lt_EGREP
+MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+if test -n "$MAGIC_CMD"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MAGIC_CMD" >&5
+$as_echo "$MAGIC_CMD" >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
 
-# The linker used to build libraries.
-LD=$lt_LD
 
-# Whether we need hard or soft links.
-LN_S=$lt_LN_S
+  else
+    MAGIC_CMD=:
+  fi
+fi
 
-# A BSD-compatible nm program.
-NM=$lt_NM
+  fi
+  ;;
+esac
 
-# A symbol stripping program
-STRIP=$lt_STRIP
+# Use C for the default configuration in the libtool script
 
-# Used to examine libraries when file_magic_cmd begins "file"
-MAGIC_CMD=$MAGIC_CMD
+lt_save_CC="$CC"
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
 
-# Used on cygwin: DLL creation program.
-DLLTOOL="$DLLTOOL"
 
-# Used on cygwin: object dumper.
-OBJDUMP="$OBJDUMP"
+# Source file extension for C test sources.
+ac_ext=c
 
-# Used on cygwin: assembler.
-AS="$AS"
+# Object file extension for compiled C test sources.
+objext=o
+objext=$objext
 
-# The name of the directory that contains temporary libtool files.
-objdir=$objdir
+# Code to be used in simple compile tests
+lt_simple_compile_test_code="int some_variable = 0;"
 
-# How to create reloadable object files.
-reload_flag=$lt_reload_flag
-reload_cmds=$lt_reload_cmds
+# Code to be used in simple link tests
+lt_simple_link_test_code='int main(){return(0);}'
 
-# How to pass a linker flag through the compiler.
-wl=$lt_lt_prog_compiler_wl
 
-# Object file suffix (normally "o").
-objext="$ac_objext"
 
-# Old archive suffix (normally "a").
-libext="$libext"
 
-# Shared library suffix (normally ".so").
-shrext_cmds='$shrext_cmds'
 
-# Executable file suffix (normally "").
-exeext="$exeext"
 
-# Additional compiler flags for building library objects.
-pic_flag=$lt_lt_prog_compiler_pic
-pic_mode=$pic_mode
 
-# What is the maximum length of a command?
-max_cmd_len=$lt_cv_sys_max_cmd_len
+# If no C compiler was specified, use CC.
+LTCC=${LTCC-"$CC"}
 
-# Does compiler simultaneously support -c and -o options?
-compiler_c_o=$lt_lt_cv_prog_compiler_c_o
+# If no C compiler flags were specified, use CFLAGS.
+LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
 
-# Must we lock files when doing compilation?
-need_locks=$lt_need_locks
+# Allow CC to be a program name with arguments.
+compiler=$CC
 
-# Do we need the lib prefix for modules?
-need_lib_prefix=$need_lib_prefix
+# Save the default compiler, since it gets overwritten when the other
+# tags are being tested, and _LT_TAGVAR(compiler, []) is a NOP.
+compiler_DEFAULT=$CC
 
-# Do we need a version for libraries?
-need_version=$need_version
+# save warnings/boilerplate of simple test code
+ac_outfile=conftest.$ac_objext
+echo "$lt_simple_compile_test_code" >conftest.$ac_ext
+eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_compiler_boilerplate=`cat conftest.err`
+$RM conftest*
 
-# Whether dlopen is supported.
-dlopen_support=$enable_dlopen
+ac_outfile=conftest.$ac_objext
+echo "$lt_simple_link_test_code" >conftest.$ac_ext
+eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_linker_boilerplate=`cat conftest.err`
+$RM -r conftest*
 
-# Whether dlopen of programs is supported.
-dlopen_self=$enable_dlopen_self
 
-# Whether dlopen of statically linked programs is supported.
-dlopen_self_static=$enable_dlopen_self_static
+if test -n "$compiler"; then
 
-# Compiler flag to prevent dynamic linking.
-link_static_flag=$lt_lt_prog_compiler_static
+lt_prog_compiler_no_builtin_flag=
 
-# Compiler flag to turn off builtin functions.
-no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag
+if test "$GCC" = yes; then
+  lt_prog_compiler_no_builtin_flag=' -fno-builtin'
 
-# Compiler flag to allow reflexive dlopens.
-export_dynamic_flag_spec=$lt_export_dynamic_flag_spec
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -fno-rtti -fno-exceptions" >&5
+$as_echo_n "checking if $compiler supports -fno-rtti -fno-exceptions... " >&6; }
+if test "${lt_cv_prog_compiler_rtti_exceptions+set}" = set; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_prog_compiler_rtti_exceptions=no
+   ac_outfile=conftest.$ac_objext
+   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+   lt_compiler_flag="-fno-rtti -fno-exceptions"
+   # Insert the option either (1) after the last *FLAGS variable, or
+   # (2) before a word containing "conftest.", or (3) at the end.
+   # Note that $ac_compile itself does not contain backslashes and begins
+   # with a dollar sign (not a hyphen), so the echo should work correctly.
+   # The option is referenced via a variable to avoid confusing sed.
+   lt_compile=`echo "$ac_compile" | $SED \
+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+   -e 's:$: $lt_compiler_flag:'`
+   (eval echo "\"\$as_me:9626: $lt_compile\"" >&5)
+   (eval "$lt_compile" 2>conftest.err)
+   ac_status=$?
+   cat conftest.err >&5
+   echo "$as_me:9630: \$? = $ac_status" >&5
+   if (exit $ac_status) && test -s "$ac_outfile"; then
+     # The compiler can only warn and ignore the option if not recognized
+     # So say no if there are warnings other than the usual output.
+     $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
+     $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+     if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
+       lt_cv_prog_compiler_rtti_exceptions=yes
+     fi
+   fi
+   $RM conftest*
 
-# Compiler flag to generate shared objects directly from archives.
-whole_archive_flag_spec=$lt_whole_archive_flag_spec
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_rtti_exceptions" >&5
+$as_echo "$lt_cv_prog_compiler_rtti_exceptions" >&6; }
 
-# Compiler flag to generate thread-safe objects.
-thread_safe_flag_spec=$lt_thread_safe_flag_spec
+if test x"$lt_cv_prog_compiler_rtti_exceptions" = xyes; then
+    lt_prog_compiler_no_builtin_flag="$lt_prog_compiler_no_builtin_flag -fno-rtti -fno-exceptions"
+else
+    :
+fi
 
-# Library versioning type.
-version_type=$version_type
+fi
 
-# Format of library name prefix.
-libname_spec=$lt_libname_spec
 
-# List of archive names.  First name is the real one, the rest are links.
-# The last name is the one that the linker finds with -lNAME.
-library_names_spec=$lt_library_names_spec
 
-# The coded name of the library, if different from the real name.
-soname_spec=$lt_soname_spec
 
-# Commands used to build and install an old-style archive.
-RANLIB=$lt_RANLIB
-old_archive_cmds=$lt_old_archive_cmds
-old_postinstall_cmds=$lt_old_postinstall_cmds
-old_postuninstall_cmds=$lt_old_postuninstall_cmds
 
-# Create an old-style archive from a shared archive.
-old_archive_from_new_cmds=$lt_old_archive_from_new_cmds
 
-# Create a temporary old-style archive to link instead of a shared archive.
-old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds
+  lt_prog_compiler_wl=
+lt_prog_compiler_pic=
+lt_prog_compiler_static=
 
-# Commands used to build and install a shared archive.
-archive_cmds=$lt_archive_cmds
-archive_expsym_cmds=$lt_archive_expsym_cmds
-postinstall_cmds=$lt_postinstall_cmds
-postuninstall_cmds=$lt_postuninstall_cmds
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $compiler option to produce PIC" >&5
+$as_echo_n "checking for $compiler option to produce PIC... " >&6; }
 
-# Commands used to build a loadable module (assumed same as above if empty)
-module_cmds=$lt_module_cmds
-module_expsym_cmds=$lt_module_expsym_cmds
+  if test "$GCC" = yes; then
+    lt_prog_compiler_wl='-Wl,'
+    lt_prog_compiler_static='-static'
 
-# Commands to strip libraries.
-old_striplib=$lt_old_striplib
-striplib=$lt_striplib
+    case $host_os in
+      aix*)
+      # All AIX code is PIC.
+      if test "$host_cpu" = ia64; then
+	# AIX 5 now supports IA64 processor
+	lt_prog_compiler_static='-Bstatic'
+      fi
+      ;;
 
-# Dependencies to place before the objects being linked to create a
-# shared library.
-predep_objects=$lt_predep_objects
+    amigaos*)
+      case $host_cpu in
+      powerpc)
+            # see comment about AmigaOS4 .so support
+            lt_prog_compiler_pic='-fPIC'
+        ;;
+      m68k)
+            # FIXME: we need at least 68020 code to build shared libraries, but
+            # adding the `-m68020' flag to GCC prevents building anything better,
+            # like `-m68040'.
+            lt_prog_compiler_pic='-m68020 -resident32 -malways-restore-a4'
+        ;;
+      esac
+      ;;
 
-# Dependencies to place after the objects being linked to create a
-# shared library.
-postdep_objects=$lt_postdep_objects
+    beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
+      # PIC is the default for these OSes.
+      ;;
 
-# Dependencies to place before the objects being linked to create a
-# shared library.
-predeps=$lt_predeps
+    mingw* | cygwin* | pw32* | os2* | cegcc*)
+      # This hack is so that the source file can tell whether it is being
+      # built for inclusion in a dll (and should export symbols for example).
+      # Although the cygwin gcc ignores -fPIC, still need this for old-style
+      # (--disable-auto-import) libraries
+      lt_prog_compiler_pic='-DDLL_EXPORT'
+      ;;
 
-# Dependencies to place after the objects being linked to create a
-# shared library.
-postdeps=$lt_postdeps
-
-# The directories searched by this compiler when creating a shared
-# library
-compiler_lib_search_dirs=$lt_compiler_lib_search_dirs
+    darwin* | rhapsody*)
+      # PIC is the default on this platform
+      # Common symbols not allowed in MH_DYLIB files
+      lt_prog_compiler_pic='-fno-common'
+      ;;
 
-# The library search path used internally by the compiler when linking
-# a shared library.
-compiler_lib_search_path=$lt_compiler_lib_search_path
+    hpux*)
+      # PIC is the default for 64-bit PA HP-UX, but not for 32-bit
+      # PA HP-UX.  On IA64 HP-UX, PIC is the default but the pic flag
+      # sets the default TLS model and affects inlining.
+      case $host_cpu in
+      hppa*64*)
+	# +Z the default
+	;;
+      *)
+	lt_prog_compiler_pic='-fPIC'
+	;;
+      esac
+      ;;
 
-# Method to check whether dependent libraries are shared objects.
-deplibs_check_method=$lt_deplibs_check_method
+    interix[3-9]*)
+      # Interix 3.x gcc -fpic/-fPIC options generate broken code.
+      # Instead, we relocate shared libraries at runtime.
+      ;;
 
-# Command to use when deplibs_check_method == file_magic.
-file_magic_cmd=$lt_file_magic_cmd
+    msdosdjgpp*)
+      # Just because we use GCC doesn't mean we suddenly get shared libraries
+      # on systems that don't support them.
+      lt_prog_compiler_can_build_shared=no
+      enable_shared=no
+      ;;
 
-# Flag that allows shared libraries with undefined symbols to be built.
-allow_undefined_flag=$lt_allow_undefined_flag
+    *nto* | *qnx*)
+      # QNX uses GNU C++, but need to define -shared option too, otherwise
+      # it will coredump.
+      lt_prog_compiler_pic='-fPIC -shared'
+      ;;
 
-# Flag that forces no undefined symbols.
-no_undefined_flag=$lt_no_undefined_flag
+    sysv4*MP*)
+      if test -d /usr/nec; then
+	lt_prog_compiler_pic=-Kconform_pic
+      fi
+      ;;
 
-# Commands used to finish a libtool library installation in a directory.
-finish_cmds=$lt_finish_cmds
+    *)
+      lt_prog_compiler_pic='-fPIC'
+      ;;
+    esac
+  else
+    # PORTME Check for flag to pass linker flags through the system compiler.
+    case $host_os in
+    aix*)
+      lt_prog_compiler_wl='-Wl,'
+      if test "$host_cpu" = ia64; then
+	# AIX 5 now supports IA64 processor
+	lt_prog_compiler_static='-Bstatic'
+      else
+	lt_prog_compiler_static='-bnso -bI:/lib/syscalls.exp'
+      fi
+      ;;
 
-# Same as above, but a single script fragment to be evaled but not shown.
-finish_eval=$lt_finish_eval
+    mingw* | cygwin* | pw32* | os2* | cegcc*)
+      # This hack is so that the source file can tell whether it is being
+      # built for inclusion in a dll (and should export symbols for example).
+      lt_prog_compiler_pic='-DDLL_EXPORT'
+      ;;
 
-# Take the output of nm and produce a listing of raw symbols and C names.
-global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe
+    hpux9* | hpux10* | hpux11*)
+      lt_prog_compiler_wl='-Wl,'
+      # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
+      # not for PA HP-UX.
+      case $host_cpu in
+      hppa*64*|ia64*)
+	# +Z the default
+	;;
+      *)
+	lt_prog_compiler_pic='+Z'
+	;;
+      esac
+      # Is there a better lt_prog_compiler_static that works with the bundled CC?
+      lt_prog_compiler_static='${wl}-a ${wl}archive'
+      ;;
 
-# Transform the output of nm in a proper C declaration
-global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl
+    irix5* | irix6* | nonstopux*)
+      lt_prog_compiler_wl='-Wl,'
+      # PIC (with -KPIC) is the default.
+      lt_prog_compiler_static='-non_shared'
+      ;;
 
-# Transform the output of nm in a C name address pair
-global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
+    linux* | k*bsd*-gnu)
+      case $cc_basename in
+      # old Intel for x86_64 which still supported -KPIC.
+      ecc*)
+	lt_prog_compiler_wl='-Wl,'
+	lt_prog_compiler_pic='-KPIC'
+	lt_prog_compiler_static='-static'
+        ;;
+      # icc used to be incompatible with GCC.
+      # ICC 10 doesn't accept -KPIC any more.
+      icc* | ifort*)
+	lt_prog_compiler_wl='-Wl,'
+	lt_prog_compiler_pic='-fPIC'
+	lt_prog_compiler_static='-static'
+        ;;
+      # Lahey Fortran 8.1.
+      lf95*)
+	lt_prog_compiler_wl='-Wl,'
+	lt_prog_compiler_pic='--shared'
+	lt_prog_compiler_static='--static'
+	;;
+      pgcc* | pgf77* | pgf90* | pgf95*)
+        # Portland Group compilers (*not* the Pentium gcc compiler,
+	# which looks to be a dead project)
+	lt_prog_compiler_wl='-Wl,'
+	lt_prog_compiler_pic='-fpic'
+	lt_prog_compiler_static='-Bstatic'
+        ;;
+      ccc*)
+        lt_prog_compiler_wl='-Wl,'
+        # All Alpha code is PIC.
+        lt_prog_compiler_static='-non_shared'
+        ;;
+      xl*)
+	# IBM XL C 8.0/Fortran 10.1 on PPC
+	lt_prog_compiler_wl='-Wl,'
+	lt_prog_compiler_pic='-qpic'
+	lt_prog_compiler_static='-qstaticlink'
+	;;
+      *)
+	case `$CC -V 2>&1 | sed 5q` in
+	*Sun\ C*)
+	  # Sun C 5.9
+	  lt_prog_compiler_pic='-KPIC'
+	  lt_prog_compiler_static='-Bstatic'
+	  lt_prog_compiler_wl='-Wl,'
+	  ;;
+	*Sun\ F*)
+	  # Sun Fortran 8.3 passes all unrecognized flags to the linker
+	  lt_prog_compiler_pic='-KPIC'
+	  lt_prog_compiler_static='-Bstatic'
+	  lt_prog_compiler_wl=''
+	  ;;
+	esac
+	;;
+      esac
+      ;;
 
-# This is the shared library runtime path variable.
-runpath_var=$runpath_var
+    newsos6)
+      lt_prog_compiler_pic='-KPIC'
+      lt_prog_compiler_static='-Bstatic'
+      ;;
 
-# This is the shared library path variable.
-shlibpath_var=$shlibpath_var
+    *nto* | *qnx*)
+      # QNX uses GNU C++, but need to define -shared option too, otherwise
+      # it will coredump.
+      lt_prog_compiler_pic='-fPIC -shared'
+      ;;
 
-# Is shlibpath searched before the hard-coded library search path?
-shlibpath_overrides_runpath=$shlibpath_overrides_runpath
+    osf3* | osf4* | osf5*)
+      lt_prog_compiler_wl='-Wl,'
+      # All OSF/1 code is PIC.
+      lt_prog_compiler_static='-non_shared'
+      ;;
 
-# How to hardcode a shared library path into an executable.
-hardcode_action=$hardcode_action
+    rdos*)
+      lt_prog_compiler_static='-non_shared'
+      ;;
 
-# Whether we should hardcode library paths into libraries.
-hardcode_into_libs=$hardcode_into_libs
+    solaris*)
+      lt_prog_compiler_pic='-KPIC'
+      lt_prog_compiler_static='-Bstatic'
+      case $cc_basename in
+      f77* | f90* | f95*)
+	lt_prog_compiler_wl='-Qoption ld ';;
+      *)
+	lt_prog_compiler_wl='-Wl,';;
+      esac
+      ;;
 
-# Flag to hardcode \$libdir into a binary during linking.
-# This must work even if \$libdir does not exist.
-hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec
+    sunos4*)
+      lt_prog_compiler_wl='-Qoption ld '
+      lt_prog_compiler_pic='-PIC'
+      lt_prog_compiler_static='-Bstatic'
+      ;;
 
-# If ld is used when linking, flag to hardcode \$libdir into
-# a binary during linking. This must work even if \$libdir does
-# not exist.
-hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld
+    sysv4 | sysv4.2uw2* | sysv4.3*)
+      lt_prog_compiler_wl='-Wl,'
+      lt_prog_compiler_pic='-KPIC'
+      lt_prog_compiler_static='-Bstatic'
+      ;;
 
-# Whether we need a single -rpath flag with a separated argument.
-hardcode_libdir_separator=$lt_hardcode_libdir_separator
+    sysv4*MP*)
+      if test -d /usr/nec ;then
+	lt_prog_compiler_pic='-Kconform_pic'
+	lt_prog_compiler_static='-Bstatic'
+      fi
+      ;;
 
-# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the
-# resulting binary.
-hardcode_direct=$hardcode_direct
+    sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
+      lt_prog_compiler_wl='-Wl,'
+      lt_prog_compiler_pic='-KPIC'
+      lt_prog_compiler_static='-Bstatic'
+      ;;
 
-# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
-# resulting binary.
-hardcode_minus_L=$hardcode_minus_L
+    unicos*)
+      lt_prog_compiler_wl='-Wl,'
+      lt_prog_compiler_can_build_shared=no
+      ;;
 
-# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into
-# the resulting binary.
-hardcode_shlibpath_var=$hardcode_shlibpath_var
+    uts4*)
+      lt_prog_compiler_pic='-pic'
+      lt_prog_compiler_static='-Bstatic'
+      ;;
 
-# Set to yes if building a shared library automatically hardcodes DIR into the library
-# and all subsequent libraries and executables linked against it.
-hardcode_automatic=$hardcode_automatic
+    *)
+      lt_prog_compiler_can_build_shared=no
+      ;;
+    esac
+  fi
 
-# Variables whose values should be saved in libtool wrapper scripts and
-# restored at relink time.
-variables_saved_for_relink="$variables_saved_for_relink"
+case $host_os in
+  # For platforms which do not support PIC, -DPIC is meaningless:
+  *djgpp*)
+    lt_prog_compiler_pic=
+    ;;
+  *)
+    lt_prog_compiler_pic="$lt_prog_compiler_pic -DPIC"
+    ;;
+esac
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_prog_compiler_pic" >&5
+$as_echo "$lt_prog_compiler_pic" >&6; }
 
-# Whether libtool must link a program against all its dependency libraries.
-link_all_deplibs=$link_all_deplibs
 
-# Compile-time system search path for libraries
-sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
 
-# Run-time system search path for libraries
-sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
 
-# Fix the shell variable \$srcfile for the compiler.
-fix_srcfile_path=$lt_fix_srcfile_path
 
-# Set to yes if exported symbols are required.
-always_export_symbols=$always_export_symbols
 
-# The commands to list exported symbols.
-export_symbols_cmds=$lt_export_symbols_cmds
+#
+# Check to make sure the PIC flag actually works.
+#
+if test -n "$lt_prog_compiler_pic"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler PIC flag $lt_prog_compiler_pic works" >&5
+$as_echo_n "checking if $compiler PIC flag $lt_prog_compiler_pic works... " >&6; }
+if test "${lt_cv_prog_compiler_pic_works+set}" = set; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_prog_compiler_pic_works=no
+   ac_outfile=conftest.$ac_objext
+   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+   lt_compiler_flag="$lt_prog_compiler_pic -DPIC"
+   # Insert the option either (1) after the last *FLAGS variable, or
+   # (2) before a word containing "conftest.", or (3) at the end.
+   # Note that $ac_compile itself does not contain backslashes and begins
+   # with a dollar sign (not a hyphen), so the echo should work correctly.
+   # The option is referenced via a variable to avoid confusing sed.
+   lt_compile=`echo "$ac_compile" | $SED \
+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+   -e 's:$: $lt_compiler_flag:'`
+   (eval echo "\"\$as_me:9965: $lt_compile\"" >&5)
+   (eval "$lt_compile" 2>conftest.err)
+   ac_status=$?
+   cat conftest.err >&5
+   echo "$as_me:9969: \$? = $ac_status" >&5
+   if (exit $ac_status) && test -s "$ac_outfile"; then
+     # The compiler can only warn and ignore the option if not recognized
+     # So say no if there are warnings other than the usual output.
+     $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
+     $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+     if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
+       lt_cv_prog_compiler_pic_works=yes
+     fi
+   fi
+   $RM conftest*
 
-# The commands to extract the exported symbol list from a shared archive.
-extract_expsyms_cmds=$lt_extract_expsyms_cmds
-
-# Symbols that should not be listed in the preloaded symbols.
-exclude_expsyms=$lt_exclude_expsyms
-
-# Symbols that must always be exported.
-include_expsyms=$lt_include_expsyms
-
-# ### END LIBTOOL CONFIG
-
-__EOF__
-
-
-  case $host_os in
-  aix3*)
-    cat <<\EOF >> "$cfgfile"
-
-# AIX sometimes has problems with the GCC collect2 program.  For some
-# reason, if we set the COLLECT_NAMES environment variable, the problems
-# vanish in a puff of smoke.
-if test "X${COLLECT_NAMES+set}" != Xset; then
-  COLLECT_NAMES=
-  export COLLECT_NAMES
 fi
-EOF
-    ;;
-  esac
-
-  # We use sed instead of cat because bash on DJGPP gets confused if
-  # if finds mixed CR/LF and LF-only lines.  Since sed operates in
-  # text mode, it properly converts lines to CR/LF.  This bash problem
-  # is reportedly fixed, but why not run on old versions too?
-  sed '$q' "$ltmain" >> "$cfgfile" || (rm -f "$cfgfile"; exit 1)
-
-  mv -f "$cfgfile" "$ofile" || \
-    (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")
-  chmod +x "$ofile"
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic_works" >&5
+$as_echo "$lt_cv_prog_compiler_pic_works" >&6; }
 
+if test x"$lt_cv_prog_compiler_pic_works" = xyes; then
+    case $lt_prog_compiler_pic in
+     "" | " "*) ;;
+     *) lt_prog_compiler_pic=" $lt_prog_compiler_pic" ;;
+     esac
 else
-  # If there is no Makefile yet, we rely on a make rule to execute
-  # `config.status --recheck' to rerun these tests and create the
-  # libtool script then.
-  ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'`
-  if test -f "$ltmain_in"; then
-    test -f Makefile && make "$ltmain"
-  fi
+    lt_prog_compiler_pic=
+     lt_prog_compiler_can_build_shared=no
 fi
 
+fi
 
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
 
-CC="$lt_save_CC"
 
 
-# Check whether --with-tags was given.
-if test "${with_tags+set}" = set; then
-  withval=$with_tags; tagnames="$withval"
-fi
 
 
-if test -f "$ltmain" && test -n "$tagnames"; then
-  if test ! -f "${ofile}"; then
-    { $as_echo "$as_me:$LINENO: WARNING: output file \`$ofile' does not exist" >&5
-$as_echo "$as_me: WARNING: output file \`$ofile' does not exist" >&2;}
-  fi
+#
+# Check to make sure the static flag actually works.
+#
+wl=$lt_prog_compiler_wl eval lt_tmp_static_flag=\"$lt_prog_compiler_static\"
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler static flag $lt_tmp_static_flag works" >&5
+$as_echo_n "checking if $compiler static flag $lt_tmp_static_flag works... " >&6; }
+if test "${lt_cv_prog_compiler_static_works+set}" = set; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_prog_compiler_static_works=no
+   save_LDFLAGS="$LDFLAGS"
+   LDFLAGS="$LDFLAGS $lt_tmp_static_flag"
+   echo "$lt_simple_link_test_code" > conftest.$ac_ext
+   if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
+     # The linker can only warn and ignore the option if not recognized
+     # So say no if there are warnings
+     if test -s conftest.err; then
+       # Append any errors to the config.log.
+       cat conftest.err 1>&5
+       $ECHO "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp
+       $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+       if diff conftest.exp conftest.er2 >/dev/null; then
+         lt_cv_prog_compiler_static_works=yes
+       fi
+     else
+       lt_cv_prog_compiler_static_works=yes
+     fi
+   fi
+   $RM -r conftest*
+   LDFLAGS="$save_LDFLAGS"
 
-  if test -z "$LTCC"; then
-    eval "`$SHELL ${ofile} --config | grep '^LTCC='`"
-    if test -z "$LTCC"; then
-      { $as_echo "$as_me:$LINENO: WARNING: output file \`$ofile' does not look like a libtool script" >&5
-$as_echo "$as_me: WARNING: output file \`$ofile' does not look like a libtool script" >&2;}
-    else
-      { $as_echo "$as_me:$LINENO: WARNING: using \`LTCC=$LTCC', extracted from \`$ofile'" >&5
-$as_echo "$as_me: WARNING: using \`LTCC=$LTCC', extracted from \`$ofile'" >&2;}
-    fi
-  fi
-  if test -z "$LTCFLAGS"; then
-    eval "`$SHELL ${ofile} --config | grep '^LTCFLAGS='`"
-  fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_static_works" >&5
+$as_echo "$lt_cv_prog_compiler_static_works" >&6; }
 
-  # Extract list of available tagged configurations in $ofile.
-  # Note that this assumes the entire list is on one line.
-  available_tags=`grep "^available_tags=" "${ofile}" | $SED -e 's/available_tags=\(.*$\)/\1/' -e 's/\"//g'`
+if test x"$lt_cv_prog_compiler_static_works" = xyes; then
+    :
+else
+    lt_prog_compiler_static=
+fi
 
-  lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
-  for tagname in $tagnames; do
-    IFS="$lt_save_ifs"
-    # Check whether tagname contains only valid characters
-    case `$echo "X$tagname" | $Xsed -e 's:[-_ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz1234567890,/]::g'` in
-    "") ;;
-    *)  { { $as_echo "$as_me:$LINENO: error: invalid tag name: $tagname" >&5
-$as_echo "$as_me: error: invalid tag name: $tagname" >&2;}
-   { (exit 1); exit 1; }; }
-	;;
-    esac
 
-    if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "${ofile}" > /dev/null
-    then
-      { { $as_echo "$as_me:$LINENO: error: tag name \"$tagname\" already exists" >&5
-$as_echo "$as_me: error: tag name \"$tagname\" already exists" >&2;}
-   { (exit 1); exit 1; }; }
-    fi
 
-    # Update the list of available tags.
-    if test -n "$tagname"; then
-      echo appending configuration tag \"$tagname\" to $ofile
-
-      case $tagname in
-      CXX)
-	if test -n "$CXX" && ( test "X$CXX" != "Xno" &&
-	    ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) ||
-	    (test "X$CXX" != "Xg++"))) ; then
-	  ac_ext=cpp
-ac_cpp='$CXXCPP $CPPFLAGS'
-ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
 
 
 
 
-archive_cmds_need_lc_CXX=no
-allow_undefined_flag_CXX=
-always_export_symbols_CXX=no
-archive_expsym_cmds_CXX=
-export_dynamic_flag_spec_CXX=
-hardcode_direct_CXX=no
-hardcode_libdir_flag_spec_CXX=
-hardcode_libdir_flag_spec_ld_CXX=
-hardcode_libdir_separator_CXX=
-hardcode_minus_L_CXX=no
-hardcode_shlibpath_var_CXX=unsupported
-hardcode_automatic_CXX=no
-module_cmds_CXX=
-module_expsym_cmds_CXX=
-link_all_deplibs_CXX=unknown
-old_archive_cmds_CXX=$old_archive_cmds
-no_undefined_flag_CXX=
-whole_archive_flag_spec_CXX=
-enable_shared_with_static_runtimes_CXX=no
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5
+$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; }
+if test "${lt_cv_prog_compiler_c_o+set}" = set; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_prog_compiler_c_o=no
+   $RM -r conftest 2>/dev/null
+   mkdir conftest
+   cd conftest
+   mkdir out
+   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
 
-# Dependencies to place before and after the object being linked:
-predep_objects_CXX=
-postdep_objects_CXX=
-predeps_CXX=
-postdeps_CXX=
-compiler_lib_search_path_CXX=
-compiler_lib_search_dirs_CXX=
+   lt_compiler_flag="-o out/conftest2.$ac_objext"
+   # Insert the option either (1) after the last *FLAGS variable, or
+   # (2) before a word containing "conftest.", or (3) at the end.
+   # Note that $ac_compile itself does not contain backslashes and begins
+   # with a dollar sign (not a hyphen), so the echo should work correctly.
+   lt_compile=`echo "$ac_compile" | $SED \
+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+   -e 's:$: $lt_compiler_flag:'`
+   (eval echo "\"\$as_me:10070: $lt_compile\"" >&5)
+   (eval "$lt_compile" 2>out/conftest.err)
+   ac_status=$?
+   cat out/conftest.err >&5
+   echo "$as_me:10074: \$? = $ac_status" >&5
+   if (exit $ac_status) && test -s out/conftest2.$ac_objext
+   then
+     # The compiler can only warn and ignore the option if not recognized
+     # So say no if there are warnings
+     $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
+     $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
+     if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
+       lt_cv_prog_compiler_c_o=yes
+     fi
+   fi
+   chmod u+w . 2>&5
+   $RM conftest*
+   # SGI C++ compiler will create directory out/ii_files/ for
+   # template instantiation
+   test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files
+   $RM out/* && rmdir out
+   cd ..
+   $RM -r conftest
+   $RM conftest*
 
-# Source file extension for C++ test sources.
-ac_ext=cpp
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o" >&5
+$as_echo "$lt_cv_prog_compiler_c_o" >&6; }
 
-# Object file extension for compiled C++ test sources.
-objext=o
-objext_CXX=$objext
 
-# Code to be used in simple compile tests
-lt_simple_compile_test_code="int some_variable = 0;"
 
-# Code to be used in simple link tests
-lt_simple_link_test_code='int main(int, char *[]) { return(0); }'
 
-# ltmain only uses $CC for tagged configurations so make sure $CC is set.
 
-# If no C compiler was specified, use CC.
-LTCC=${LTCC-"$CC"}
 
-# If no C compiler flags were specified, use CFLAGS.
-LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5
+$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; }
+if test "${lt_cv_prog_compiler_c_o+set}" = set; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_prog_compiler_c_o=no
+   $RM -r conftest 2>/dev/null
+   mkdir conftest
+   cd conftest
+   mkdir out
+   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
 
-# Allow CC to be a program name with arguments.
-compiler=$CC
+   lt_compiler_flag="-o out/conftest2.$ac_objext"
+   # Insert the option either (1) after the last *FLAGS variable, or
+   # (2) before a word containing "conftest.", or (3) at the end.
+   # Note that $ac_compile itself does not contain backslashes and begins
+   # with a dollar sign (not a hyphen), so the echo should work correctly.
+   lt_compile=`echo "$ac_compile" | $SED \
+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+   -e 's:$: $lt_compiler_flag:'`
+   (eval echo "\"\$as_me:10125: $lt_compile\"" >&5)
+   (eval "$lt_compile" 2>out/conftest.err)
+   ac_status=$?
+   cat out/conftest.err >&5
+   echo "$as_me:10129: \$? = $ac_status" >&5
+   if (exit $ac_status) && test -s out/conftest2.$ac_objext
+   then
+     # The compiler can only warn and ignore the option if not recognized
+     # So say no if there are warnings
+     $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
+     $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
+     if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
+       lt_cv_prog_compiler_c_o=yes
+     fi
+   fi
+   chmod u+w . 2>&5
+   $RM conftest*
+   # SGI C++ compiler will create directory out/ii_files/ for
+   # template instantiation
+   test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files
+   $RM out/* && rmdir out
+   cd ..
+   $RM -r conftest
+   $RM conftest*
 
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o" >&5
+$as_echo "$lt_cv_prog_compiler_c_o" >&6; }
 
-# save warnings/boilerplate of simple test code
-ac_outfile=conftest.$ac_objext
-echo "$lt_simple_compile_test_code" >conftest.$ac_ext
-eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
-_lt_compiler_boilerplate=`cat conftest.err`
-$rm conftest*
 
-ac_outfile=conftest.$ac_objext
-echo "$lt_simple_link_test_code" >conftest.$ac_ext
-eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
-_lt_linker_boilerplate=`cat conftest.err`
-$rm -r conftest*
 
 
-# Allow CC to be a program name with arguments.
-lt_save_CC=$CC
-lt_save_LD=$LD
-lt_save_GCC=$GCC
-GCC=$GXX
-lt_save_with_gnu_ld=$with_gnu_ld
-lt_save_path_LD=$lt_cv_path_LD
-if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then
-  lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx
-else
-  $as_unset lt_cv_prog_gnu_ld
-fi
-if test -n "${lt_cv_path_LDCXX+set}"; then
-  lt_cv_path_LD=$lt_cv_path_LDCXX
+hard_links="nottested"
+if test "$lt_cv_prog_compiler_c_o" = no && test "$need_locks" != no; then
+  # do not overwrite the value of need_locks provided by the user
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if we can lock with hard links" >&5
+$as_echo_n "checking if we can lock with hard links... " >&6; }
+  hard_links=yes
+  $RM conftest*
+  ln conftest.a conftest.b 2>/dev/null && hard_links=no
+  touch conftest.a
+  ln conftest.a conftest.b 2>&5 || hard_links=no
+  ln conftest.a conftest.b 2>/dev/null && hard_links=no
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $hard_links" >&5
+$as_echo "$hard_links" >&6; }
+  if test "$hard_links" = no; then
+    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5
+$as_echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;}
+    need_locks=warn
+  fi
 else
-  $as_unset lt_cv_path_LD
+  need_locks=no
 fi
-test -z "${LDCXX+set}" || LD=$LDCXX
-CC=${CXX-"c++"}
-compiler=$CC
-compiler_CXX=$CC
-for cc_temp in $compiler""; do
-  case $cc_temp in
-    compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
-    distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
-    \-*) ;;
-    *) break;;
-  esac
-done
-cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
 
 
-# We don't want -fno-exception wen compiling C++ code, so set the
-# no_builtin_flag separately
-if test "$GXX" = yes; then
-  lt_prog_compiler_no_builtin_flag_CXX=' -fno-builtin'
-else
-  lt_prog_compiler_no_builtin_flag_CXX=
-fi
 
-if test "$GXX" = yes; then
-  # Set up default GNU C++ configuration
 
 
-# Check whether --with-gnu-ld was given.
-if test "${with_gnu_ld+set}" = set; then
-  withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes
-else
-  with_gnu_ld=no
-fi
 
-ac_prog=ld
-if test "$GCC" = yes; then
-  # Check if gcc -print-prog-name=ld gives a path.
-  { $as_echo "$as_me:$LINENO: checking for ld used by $CC" >&5
-$as_echo_n "checking for ld used by $CC... " >&6; }
-  case $host in
-  *-*-mingw*)
-    # gcc leaves a trailing carriage return which upsets mingw
-    ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
-  *)
-    ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
-  esac
-  case $ac_prog in
-    # Accept absolute paths.
-    [\\/]* | ?:[\\/]*)
-      re_direlt='/[^/][^/]*/\.\./'
-      # Canonicalize the pathname of ld
-      ac_prog=`echo $ac_prog| $SED 's%\\\\%/%g'`
-      while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
-	ac_prog=`echo $ac_prog| $SED "s%$re_direlt%/%"`
-      done
-      test -z "$LD" && LD="$ac_prog"
-      ;;
-  "")
-    # If it fails, then pretend we aren't using GCC.
-    ac_prog=ld
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $compiler linker ($LD) supports shared libraries" >&5
+$as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; }
+
+  runpath_var=
+  allow_undefined_flag=
+  always_export_symbols=no
+  archive_cmds=
+  archive_expsym_cmds=
+  compiler_needs_object=no
+  enable_shared_with_static_runtimes=no
+  export_dynamic_flag_spec=
+  export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+  hardcode_automatic=no
+  hardcode_direct=no
+  hardcode_direct_absolute=no
+  hardcode_libdir_flag_spec=
+  hardcode_libdir_flag_spec_ld=
+  hardcode_libdir_separator=
+  hardcode_minus_L=no
+  hardcode_shlibpath_var=unsupported
+  inherit_rpath=no
+  link_all_deplibs=unknown
+  module_cmds=
+  module_expsym_cmds=
+  old_archive_from_new_cmds=
+  old_archive_from_expsyms_cmds=
+  thread_safe_flag_spec=
+  whole_archive_flag_spec=
+  # include_expsyms should be a list of space-separated symbols to be *always*
+  # included in the symbol list
+  include_expsyms=
+  # exclude_expsyms can be an extended regexp of symbols to exclude
+  # it will be wrapped by ` (' and `)$', so one must not match beginning or
+  # end of line.  Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
+  # as well as any symbol that contains `d'.
+  exclude_expsyms='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'
+  # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
+  # platforms (ab)use it in PIC code, but their linkers get confused if
+  # the symbol is explicitly referenced.  Since portable code cannot
+  # rely on this symbol name, it's probably fine to never include it in
+  # preloaded symbol tables.
+  # Exclude shared library initialization/finalization symbols.
+  extract_expsyms_cmds=
+
+  case $host_os in
+  cygwin* | mingw* | pw32* | cegcc*)
+    # FIXME: the MSVC++ port hasn't been tested in a loooong time
+    # When not using gcc, we currently assume that we are using
+    # Microsoft Visual C++.
+    if test "$GCC" != yes; then
+      with_gnu_ld=no
+    fi
     ;;
-  *)
-    # If it is relative, then search for the first ld in PATH.
-    with_gnu_ld=unknown
+  interix*)
+    # we just hope/assume this is gcc and not c89 (= MSVC++)
+    with_gnu_ld=yes
+    ;;
+  openbsd*)
+    with_gnu_ld=no
+    ;;
+  linux* | k*bsd*-gnu)
+    link_all_deplibs=no
     ;;
   esac
-elif test "$with_gnu_ld" = yes; then
-  { $as_echo "$as_me:$LINENO: checking for GNU ld" >&5
-$as_echo_n "checking for GNU ld... " >&6; }
-else
-  { $as_echo "$as_me:$LINENO: checking for non-GNU ld" >&5
-$as_echo_n "checking for non-GNU ld... " >&6; }
-fi
-if test "${lt_cv_path_LD+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
-  if test -z "$LD"; then
-  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-  for ac_dir in $PATH; do
-    IFS="$lt_save_ifs"
-    test -z "$ac_dir" && ac_dir=.
-    if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
-      lt_cv_path_LD="$ac_dir/$ac_prog"
-      # Check to see if the program is GNU ld.  I'd rather use --version,
-      # but apparently some variants of GNU ld only accept -v.
-      # Break only if it was the GNU/non-GNU ld that we prefer.
-      case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
-      *GNU* | *'with BFD'*)
-	test "$with_gnu_ld" != no && break
-	;;
-      *)
-	test "$with_gnu_ld" != yes && break
-	;;
-      esac
-    fi
-  done
-  IFS="$lt_save_ifs"
-else
-  lt_cv_path_LD="$LD" # Let the user override the test with a path.
-fi
-fi
-
-LD="$lt_cv_path_LD"
-if test -n "$LD"; then
-  { $as_echo "$as_me:$LINENO: result: $LD" >&5
-$as_echo "$LD" >&6; }
-else
-  { $as_echo "$as_me:$LINENO: result: no" >&5
-$as_echo "no" >&6; }
-fi
-test -z "$LD" && { { $as_echo "$as_me:$LINENO: error: no acceptable ld found in \$PATH" >&5
-$as_echo "$as_me: error: no acceptable ld found in \$PATH" >&2;}
-   { (exit 1); exit 1; }; }
-{ $as_echo "$as_me:$LINENO: checking if the linker ($LD) is GNU ld" >&5
-$as_echo_n "checking if the linker ($LD) is GNU ld... " >&6; }
-if test "${lt_cv_prog_gnu_ld+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
-  # I'd rather use --version here, but apparently some GNU lds only accept -v.
-case `$LD -v 2>&1 </dev/null` in
-*GNU* | *'with BFD'*)
-  lt_cv_prog_gnu_ld=yes
-  ;;
-*)
-  lt_cv_prog_gnu_ld=no
-  ;;
-esac
-fi
-{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_gnu_ld" >&5
-$as_echo "$lt_cv_prog_gnu_ld" >&6; }
-with_gnu_ld=$lt_cv_prog_gnu_ld
-
-
 
-  # Check if GNU C++ uses GNU ld as the underlying linker, since the
-  # archiving commands below assume that GNU ld is being used.
+  ld_shlibs=yes
   if test "$with_gnu_ld" = yes; then
-    archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
-    archive_expsym_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-
-    hardcode_libdir_flag_spec_CXX='${wl}--rpath ${wl}$libdir'
-    export_dynamic_flag_spec_CXX='${wl}--export-dynamic'
-
     # If archive_cmds runs LD, not CC, wlarc should be empty
-    # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to
-    #     investigate it a little bit more. (MM)
     wlarc='${wl}'
 
+    # Set some defaults for GNU ld with shared library support. These
+    # are reset later if shared libraries are not supported. Putting them
+    # here allows them to be overridden if necessary.
+    runpath_var=LD_RUN_PATH
+    hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+    export_dynamic_flag_spec='${wl}--export-dynamic'
     # ancient GNU ld didn't support --whole-archive et. al.
-    if eval "`$CC -print-prog-name=ld` --help 2>&1" | \
-	grep 'no-whole-archive' > /dev/null; then
-      whole_archive_flag_spec_CXX="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+    if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then
+      whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
     else
-      whole_archive_flag_spec_CXX=
+      whole_archive_flag_spec=
     fi
-  else
-    with_gnu_ld=no
-    wlarc=
-
-    # A generic and very simple default shared library creation
-    # command for GNU C++ for the case where it uses the native
-    # linker, instead of GNU ld.  If possible, this setting should
-    # overridden to take advantage of the native linker features on
-    # the platform it is being used on.
-    archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
-  fi
+    supports_anon_versioning=no
+    case `$LD -v 2>&1` in
+      *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11
+      *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
+      *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
+      *\ 2.11.*) ;; # other 2.11 versions
+      *) supports_anon_versioning=yes ;;
+    esac
 
-  # Commands to make compiler produce verbose output that lists
-  # what "hidden" libraries, object files and flags are used when
-  # linking a shared library.
-  output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"'
+    # See if GNU ld supports shared libraries.
+    case $host_os in
+    aix[3-9]*)
+      # On AIX/PPC, the GNU linker is very broken
+      if test "$host_cpu" != ia64; then
+	ld_shlibs=no
+	cat <<_LT_EOF 1>&2
 
-else
-  GXX=no
-  with_gnu_ld=no
-  wlarc=
-fi
+*** Warning: the GNU linker, at least up to release 2.9.1, is reported
+*** to be unable to reliably create shared libraries on AIX.
+*** Therefore, libtool is disabling shared libraries support.  If you
+*** really care for shared libraries, you may want to modify your PATH
+*** so that a non-GNU linker is found, and then restart.
 
-# PORTME: fill in a description of your system's C++ link characteristics
-{ $as_echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5
-$as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; }
-ld_shlibs_CXX=yes
-case $host_os in
-  aix3*)
-    # FIXME: insert proper C++ library support
-    ld_shlibs_CXX=no
-    ;;
-  aix[4-9]*)
-    if test "$host_cpu" = ia64; then
-      # On IA64, the linker does run time linking by default, so we don't
-      # have to do anything special.
-      aix_use_runtimelinking=no
-      exp_sym_flag='-Bexport'
-      no_entry_flag=""
-    else
-      aix_use_runtimelinking=no
+_LT_EOF
+      fi
+      ;;
 
-      # Test if we are trying to use run time linking or normal
-      # AIX style linking. If -brtl is somewhere in LDFLAGS, we
-      # need to do runtime linking.
-      case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*)
-	for ld_flag in $LDFLAGS; do
-	  case $ld_flag in
-	  *-brtl*)
-	    aix_use_runtimelinking=yes
-	    break
-	    ;;
-	  esac
-	done
-	;;
+    amigaos*)
+      case $host_cpu in
+      powerpc)
+            # see comment about AmigaOS4 .so support
+            archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+            archive_expsym_cmds=''
+        ;;
+      m68k)
+            archive_cmds='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
+            hardcode_libdir_flag_spec='-L$libdir'
+            hardcode_minus_L=yes
+        ;;
       esac
+      ;;
 
-      exp_sym_flag='-bexport'
-      no_entry_flag='-bnoentry'
-    fi
+    beos*)
+      if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+	allow_undefined_flag=unsupported
+	# Joseph Beckenbach <jrb3@best.com> says some releases of gcc
+	# support --undefined.  This deserves some investigation.  FIXME
+	archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+      else
+	ld_shlibs=no
+      fi
+      ;;
 
-    # When large executables or shared objects are built, AIX ld can
-    # have problems creating the table of contents.  If linking a library
-    # or program results in "error TOC overflow" add -mminimal-toc to
-    # CXXFLAGS/CFLAGS for g++/gcc.  In the cases where that is not
-    # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
-
-    archive_cmds_CXX=''
-    hardcode_direct_CXX=yes
-    hardcode_libdir_separator_CXX=':'
-    link_all_deplibs_CXX=yes
+    cygwin* | mingw* | pw32* | cegcc*)
+      # _LT_TAGVAR(hardcode_libdir_flag_spec, ) is actually meaningless,
+      # as there is no search path for DLLs.
+      hardcode_libdir_flag_spec='-L$libdir'
+      allow_undefined_flag=unsupported
+      always_export_symbols=no
+      enable_shared_with_static_runtimes=yes
+      export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/'\'' | $SED -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols'
 
-    if test "$GXX" = yes; then
-      case $host_os in aix4.[012]|aix4.[012].*)
-      # We only want to do this on AIX 4.2 and lower, the check
-      # below for broken collect2 doesn't work under 4.3+
-	collect2name=`${CC} -print-prog-name=collect2`
-	if test -f "$collect2name" && \
-	   strings "$collect2name" | grep resolve_lib_name >/dev/null
-	then
-	  # We have reworked collect2
-	  :
+      if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
+        archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+	# If the export-symbols file already is a .def file (1st line
+	# is EXPORTS), use it as is; otherwise, prepend...
+	archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
+	  cp $export_symbols $output_objdir/$soname.def;
 	else
-	  # We have old collect2
-	  hardcode_direct_CXX=unsupported
-	  # It fails to find uninstalled libraries when the uninstalled
-	  # path is not listed in the libpath.  Setting hardcode_minus_L
-	  # to unsupported forces relinking
-	  hardcode_minus_L_CXX=yes
-	  hardcode_libdir_flag_spec_CXX='-L$libdir'
-	  hardcode_libdir_separator_CXX=
-	fi
-	;;
-      esac
-      shared_flag='-shared'
-      if test "$aix_use_runtimelinking" = yes; then
-	shared_flag="$shared_flag "'${wl}-G'
-      fi
-    else
-      # not using gcc
-      if test "$host_cpu" = ia64; then
-	# VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
-	# chokes on -Wl,-G. The following line is correct:
-	shared_flag='-G'
+	  echo EXPORTS > $output_objdir/$soname.def;
+	  cat $export_symbols >> $output_objdir/$soname.def;
+	fi~
+	$CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
       else
-	if test "$aix_use_runtimelinking" = yes; then
-	  shared_flag='${wl}-G'
-	else
-	  shared_flag='${wl}-bM:SRE'
-	fi
+	ld_shlibs=no
       fi
-    fi
-
-    # It seems that -bexpall does not export symbols beginning with
-    # underscore (_), so it is better to generate a list of symbols to export.
-    always_export_symbols_CXX=yes
-    if test "$aix_use_runtimelinking" = yes; then
-      # Warning - without using the other runtime loading flags (-brtl),
-      # -berok will link without error, but may produce a broken library.
-      allow_undefined_flag_CXX='-berok'
-      # Determine the default libpath from the value encoded in an empty executable.
-      cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
+      ;;
 
-int
-main ()
-{
+    interix[3-9]*)
+      hardcode_direct=no
+      hardcode_shlibpath_var=no
+      hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
+      export_dynamic_flag_spec='${wl}-E'
+      # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
+      # Instead, shared libraries are loaded at an image base (0x10000000 by
+      # default) and relocated if they conflict, which is a slow very memory
+      # consuming and fragmenting process.  To avoid this, we pick a random,
+      # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
+      # time.  Moving up from 0x10000000 also allows more sbrk(2) space.
+      archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+      archive_expsym_cmds='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+      ;;
 
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_link") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_cxx_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest$ac_exeext && {
-	 test "$cross_compiling" = yes ||
-	 $as_test_x conftest$ac_exeext
-       }; then
+    gnu* | linux* | tpf* | k*bsd*-gnu)
+      tmp_diet=no
+      if test "$host_os" = linux-dietlibc; then
+	case $cc_basename in
+	  diet\ *) tmp_diet=yes;;	# linux-dietlibc with static linking (!diet-dyn)
+	esac
+      fi
+      if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \
+	 && test "$tmp_diet" = no
+      then
+	tmp_addflag=
+	tmp_sharedflag='-shared'
+	case $cc_basename,$host_cpu in
+        pgcc*)				# Portland Group C compiler
+	  whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
+	  tmp_addflag=' $pic_flag'
+	  ;;
+	pgf77* | pgf90* | pgf95*)	# Portland Group f77 and f90 compilers
+	  whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
+	  tmp_addflag=' $pic_flag -Mnomain' ;;
+	ecc*,ia64* | icc*,ia64*)	# Intel C compiler on ia64
+	  tmp_addflag=' -i_dynamic' ;;
+	efc*,ia64* | ifort*,ia64*)	# Intel Fortran compiler on ia64
+	  tmp_addflag=' -i_dynamic -nofor_main' ;;
+	ifc* | ifort*)			# Intel Fortran compiler
+	  tmp_addflag=' -nofor_main' ;;
+	lf95*)				# Lahey Fortran 8.1
+	  whole_archive_flag_spec=
+	  tmp_sharedflag='--shared' ;;
+	xl[cC]*)			# IBM XL C 8.0 on PPC (deal with xlf below)
+	  tmp_sharedflag='-qmkshrobj'
+	  tmp_addflag= ;;
+	esac
+	case `$CC -V 2>&1 | sed 5q` in
+	*Sun\ C*)			# Sun C 5.9
+	  whole_archive_flag_spec='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
+	  compiler_needs_object=yes
+	  tmp_sharedflag='-G' ;;
+	*Sun\ F*)			# Sun Fortran 8.3
+	  tmp_sharedflag='-G' ;;
+	esac
+	archive_cmds='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+
+        if test "x$supports_anon_versioning" = xyes; then
+          archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~
+	    cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+	    echo "local: *; };" >> $output_objdir/$libname.ver~
+	    $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
+        fi
+
+	case $cc_basename in
+	xlf*)
+	  # IBM XL Fortran 10.1 on PPC cannot create shared libs itself
+	  whole_archive_flag_spec='--whole-archive$convenience --no-whole-archive'
+	  hardcode_libdir_flag_spec=
+	  hardcode_libdir_flag_spec_ld='-rpath $libdir'
+	  archive_cmds='$LD -shared $libobjs $deplibs $compiler_flags -soname $soname -o $lib'
+	  if test "x$supports_anon_versioning" = xyes; then
+	    archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~
+	      cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+	      echo "local: *; };" >> $output_objdir/$libname.ver~
+	      $LD -shared $libobjs $deplibs $compiler_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib'
+	  fi
+	  ;;
+	esac
+      else
+        ld_shlibs=no
+      fi
+      ;;
+
+    netbsd* | netbsdelf*-gnu)
+      if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+	archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
+	wlarc=
+      else
+	archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+      fi
+      ;;
+
+    solaris*)
+      if $LD -v 2>&1 | $GREP 'BFD 2\.8' > /dev/null; then
+	ld_shlibs=no
+	cat <<_LT_EOF 1>&2
+
+*** Warning: The releases 2.8.* of the GNU linker cannot reliably
+*** create shared libraries on Solaris systems.  Therefore, libtool
+*** is disabling shared libraries support.  We urge you to upgrade GNU
+*** binutils to release 2.9.1 or newer.  Another option is to modify
+*** your PATH or compiler configuration so that the native linker is
+*** used, and then restart.
+
+_LT_EOF
+      elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+	archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+      else
+	ld_shlibs=no
+      fi
+      ;;
+
+    sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
+      case `$LD -v 2>&1` in
+        *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*)
+	ld_shlibs=no
+	cat <<_LT_EOF 1>&2
+
+*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not
+*** reliably create shared libraries on SCO systems.  Therefore, libtool
+*** is disabling shared libraries support.  We urge you to upgrade GNU
+*** binutils to release 2.16.91.0.3 or newer.  Another option is to modify
+*** your PATH or compiler configuration so that the native linker is
+*** used, and then restart.
+
+_LT_EOF
+	;;
+	*)
+	  # For security reasons, it is highly recommended that you always
+	  # use absolute paths for naming shared libraries, and exclude the
+	  # DT_RUNPATH tag from executables and libraries.  But doing so
+	  # requires that you compile everything twice, which is a pain.
+	  if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+	    hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+	    archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	    archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+	  else
+	    ld_shlibs=no
+	  fi
+	;;
+      esac
+      ;;
+
+    sunos4*)
+      archive_cmds='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+      wlarc=
+      hardcode_direct=yes
+      hardcode_shlibpath_var=no
+      ;;
+
+    *)
+      if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+	archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+      else
+	ld_shlibs=no
+      fi
+      ;;
+    esac
+
+    if test "$ld_shlibs" = no; then
+      runpath_var=
+      hardcode_libdir_flag_spec=
+      export_dynamic_flag_spec=
+      whole_archive_flag_spec=
+    fi
+  else
+    # PORTME fill in a description of your system's linker (not GNU ld)
+    case $host_os in
+    aix3*)
+      allow_undefined_flag=unsupported
+      always_export_symbols=yes
+      archive_expsym_cmds='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
+      # Note: this linker hardcodes the directories in LIBPATH if there
+      # are no directories specified by -L.
+      hardcode_minus_L=yes
+      if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then
+	# Neither direct hardcoding nor static linking is supported with a
+	# broken collect2.
+	hardcode_direct=unsupported
+      fi
+      ;;
+
+    aix[4-9]*)
+      if test "$host_cpu" = ia64; then
+	# On IA64, the linker does run time linking by default, so we don't
+	# have to do anything special.
+	aix_use_runtimelinking=no
+	exp_sym_flag='-Bexport'
+	no_entry_flag=""
+      else
+	# If we're using GNU nm, then we don't want the "-C" option.
+	# -C means demangle to AIX nm, but means don't demangle with GNU nm
+	if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
+	  export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+	else
+	  export_symbols_cmds='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+	fi
+	aix_use_runtimelinking=no
+
+	# Test if we are trying to use run time linking or normal
+	# AIX style linking. If -brtl is somewhere in LDFLAGS, we
+	# need to do runtime linking.
+	case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*)
+	  for ld_flag in $LDFLAGS; do
+	  if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
+	    aix_use_runtimelinking=yes
+	    break
+	  fi
+	  done
+	  ;;
+	esac
+
+	exp_sym_flag='-bexport'
+	no_entry_flag='-bnoentry'
+      fi
+
+      # When large executables or shared objects are built, AIX ld can
+      # have problems creating the table of contents.  If linking a library
+      # or program results in "error TOC overflow" add -mminimal-toc to
+      # CXXFLAGS/CFLAGS for g++/gcc.  In the cases where that is not
+      # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
+
+      archive_cmds=''
+      hardcode_direct=yes
+      hardcode_direct_absolute=yes
+      hardcode_libdir_separator=':'
+      link_all_deplibs=yes
+      file_list_spec='${wl}-f,'
+
+      if test "$GCC" = yes; then
+	case $host_os in aix4.[012]|aix4.[012].*)
+	# We only want to do this on AIX 4.2 and lower, the check
+	# below for broken collect2 doesn't work under 4.3+
+	  collect2name=`${CC} -print-prog-name=collect2`
+	  if test -f "$collect2name" &&
+	   strings "$collect2name" | $GREP resolve_lib_name >/dev/null
+	  then
+	  # We have reworked collect2
+	  :
+	  else
+	  # We have old collect2
+	  hardcode_direct=unsupported
+	  # It fails to find uninstalled libraries when the uninstalled
+	  # path is not listed in the libpath.  Setting hardcode_minus_L
+	  # to unsupported forces relinking
+	  hardcode_minus_L=yes
+	  hardcode_libdir_flag_spec='-L$libdir'
+	  hardcode_libdir_separator=
+	  fi
+	  ;;
+	esac
+	shared_flag='-shared'
+	if test "$aix_use_runtimelinking" = yes; then
+	  shared_flag="$shared_flag "'${wl}-G'
+	fi
+	link_all_deplibs=no
+      else
+	# not using gcc
+	if test "$host_cpu" = ia64; then
+	# VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
+	# chokes on -Wl,-G. The following line is correct:
+	  shared_flag='-G'
+	else
+	  if test "$aix_use_runtimelinking" = yes; then
+	    shared_flag='${wl}-G'
+	  else
+	    shared_flag='${wl}-bM:SRE'
+	  fi
+	fi
+      fi
+
+      export_dynamic_flag_spec='${wl}-bexpall'
+      # It seems that -bexpall does not export symbols beginning with
+      # underscore (_), so it is better to generate a list of symbols to export.
+      always_export_symbols=yes
+      if test "$aix_use_runtimelinking" = yes; then
+	# Warning - without using the other runtime loading flags (-brtl),
+	# -berok will link without error, but may produce a broken library.
+	allow_undefined_flag='-berok'
+        # Determine the default libpath from the value encoded in an
+        # empty executable.
+        cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
 
 lt_aix_libpath_sed='
     /Import File Strings/,/^$/ {
@@ -13283,33 +10652,22 @@
 if test -z "$aix_libpath"; then
   aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
 fi
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-
 fi
-
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-      conftest$ac_exeext conftest.$ac_ext
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
 if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
 
-      hardcode_libdir_flag_spec_CXX='${wl}-blibpath:$libdir:'"$aix_libpath"
-
-      archive_expsym_cmds_CXX="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
-     else
-      if test "$host_cpu" = ia64; then
-	hardcode_libdir_flag_spec_CXX='${wl}-R $libdir:/usr/lib:/lib'
-	allow_undefined_flag_CXX="-z nodefs"
-	archive_expsym_cmds_CXX="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
+        hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
+        archive_expsym_cmds='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then $ECHO "X${wl}${allow_undefined_flag}" | $Xsed; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
       else
-	# Determine the default libpath from the value encoded in an empty executable.
-	cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+	if test "$host_cpu" = ia64; then
+	  hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib'
+	  allow_undefined_flag="-z nodefs"
+	  archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
+	else
+	 # Determine the default libpath from the value encoded in an
+	 # empty executable.
+	 cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 
 int
@@ -13320,27 +10678,7 @@
   return 0;
 }
 _ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_link") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_cxx_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest$ac_exeext && {
-	 test "$cross_compiling" = yes ||
-	 $as_test_x conftest$ac_exeext
-       }; then
+if ac_fn_c_try_link "$LINENO"; then :
 
 lt_aix_libpath_sed='
     /Import File Strings/,/^$/ {
@@ -13354,5212 +10692,2176 @@
 if test -z "$aix_libpath"; then
   aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
 fi
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-
 fi
-
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-      conftest$ac_exeext conftest.$ac_ext
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
 if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
 
-	hardcode_libdir_flag_spec_CXX='${wl}-blibpath:$libdir:'"$aix_libpath"
-	# Warning - without using the other run time loading flags,
-	# -berok will link without error, but may produce a broken library.
-	no_undefined_flag_CXX=' ${wl}-bernotok'
-	allow_undefined_flag_CXX=' ${wl}-berok'
-	# Exported symbols can be pulled into shared objects from archives
-	whole_archive_flag_spec_CXX='$convenience'
-	archive_cmds_need_lc_CXX=yes
-	# This is similar to how AIX traditionally builds its shared libraries.
-	archive_expsym_cmds_CXX="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
-      fi
-    fi
-    ;;
+	 hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
+	  # Warning - without using the other run time loading flags,
+	  # -berok will link without error, but may produce a broken library.
+	  no_undefined_flag=' ${wl}-bernotok'
+	  allow_undefined_flag=' ${wl}-berok'
+	  # Exported symbols can be pulled into shared objects from archives
+	  whole_archive_flag_spec='$convenience'
+	  archive_cmds_need_lc=yes
+	  # This is similar to how AIX traditionally builds its shared libraries.
+	  archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
+	fi
+      fi
+      ;;
 
-  beos*)
-    if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-      allow_undefined_flag_CXX=unsupported
-      # Joseph Beckenbach <jrb3@best.com> says some releases of gcc
-      # support --undefined.  This deserves some investigation.  FIXME
-      archive_cmds_CXX='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-    else
-      ld_shlibs_CXX=no
-    fi
-    ;;
+    amigaos*)
+      case $host_cpu in
+      powerpc)
+            # see comment about AmigaOS4 .so support
+            archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+            archive_expsym_cmds=''
+        ;;
+      m68k)
+            archive_cmds='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
+            hardcode_libdir_flag_spec='-L$libdir'
+            hardcode_minus_L=yes
+        ;;
+      esac
+      ;;
 
-  chorus*)
-    case $cc_basename in
-      *)
-	# FIXME: insert proper C++ library support
-	ld_shlibs_CXX=no
-	;;
-    esac
-    ;;
+    bsdi[45]*)
+      export_dynamic_flag_spec=-rdynamic
+      ;;
 
-  cygwin* | mingw* | pw32*)
-    # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, CXX) is actually meaningless,
-    # as there is no search path for DLLs.
-    hardcode_libdir_flag_spec_CXX='-L$libdir'
-    allow_undefined_flag_CXX=unsupported
-    always_export_symbols_CXX=no
-    enable_shared_with_static_runtimes_CXX=yes
-
-    if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
-      archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
-      # If the export-symbols file already is a .def file (1st line
-      # is EXPORTS), use it as is; otherwise, prepend...
-      archive_expsym_cmds_CXX='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
-	cp $export_symbols $output_objdir/$soname.def;
-      else
-	echo EXPORTS > $output_objdir/$soname.def;
-	cat $export_symbols >> $output_objdir/$soname.def;
-      fi~
-      $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
-    else
-      ld_shlibs_CXX=no
-    fi
-  ;;
-      darwin* | rhapsody*)
-      archive_cmds_need_lc_CXX=no
-      hardcode_direct_CXX=no
-      hardcode_automatic_CXX=yes
-      hardcode_shlibpath_var_CXX=unsupported
-      whole_archive_flag_spec_CXX=''
-      link_all_deplibs_CXX=yes
-      allow_undefined_flag_CXX="$_lt_dar_allow_undefined"
-      if test "$GXX" = yes ; then
-      output_verbose_link_cmd='echo'
-      archive_cmds_CXX="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}"
-      module_cmds_CXX="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}"
-      archive_expsym_cmds_CXX="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}"
-      module_expsym_cmds_CXX="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}"
-      if test "$lt_cv_apple_cc_single_mod" != "yes"; then
-        archive_cmds_CXX="\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dsymutil}"
-        archive_expsym_cmds_CXX="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dar_export_syms}${_lt_dsymutil}"
-      fi
-      else
-      case $cc_basename in
-        xlc*)
-         output_verbose_link_cmd='echo'
-          archive_cmds_CXX='$CC -qmkshrobj ${wl}-single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $xlcverstring'
-          module_cmds_CXX='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
-          # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
-          archive_expsym_cmds_CXX='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj ${wl}-single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $xlcverstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-          module_expsym_cmds_CXX='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag  -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-          ;;
-       *)
-         ld_shlibs_CXX=no
-          ;;
-      esac
-      fi
-        ;;
+    cygwin* | mingw* | pw32* | cegcc*)
+      # When not using gcc, we currently assume that we are using
+      # Microsoft Visual C++.
+      # hardcode_libdir_flag_spec is actually meaningless, as there is
+      # no search path for DLLs.
+      hardcode_libdir_flag_spec=' '
+      allow_undefined_flag=unsupported
+      # Tell ltmain to make .lib files, not .a files.
+      libext=lib
+      # Tell ltmain to make .dll files, not .so files.
+      shrext_cmds=".dll"
+      # FIXME: Setting linknames here is a bad hack.
+      archive_cmds='$CC -o $lib $libobjs $compiler_flags `$ECHO "X$deplibs" | $Xsed -e '\''s/ -lc$//'\''` -link -dll~linknames='
+      # The linker will automatically build a .lib file if we build a DLL.
+      old_archive_from_new_cmds='true'
+      # FIXME: Should let the user specify the lib program.
+      old_archive_cmds='lib -OUT:$oldlib$oldobjs$old_deplibs'
+      fix_srcfile_path='`cygpath -w "$srcfile"`'
+      enable_shared_with_static_runtimes=yes
+      ;;
+
+    darwin* | rhapsody*)
+
+
+  archive_cmds_need_lc=no
+  hardcode_direct=no
+  hardcode_automatic=yes
+  hardcode_shlibpath_var=unsupported
+  whole_archive_flag_spec=''
+  link_all_deplibs=yes
+  allow_undefined_flag="$_lt_dar_allow_undefined"
+  case $cc_basename in
+     ifort*) _lt_dar_can_shared=yes ;;
+     *) _lt_dar_can_shared=$GCC ;;
+  esac
+  if test "$_lt_dar_can_shared" = "yes"; then
+    output_verbose_link_cmd=echo
+    archive_cmds="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}"
+    module_cmds="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}"
+    archive_expsym_cmds="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}"
+    module_expsym_cmds="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}"
+
+  else
+  ld_shlibs=no
+  fi
 
-  dgux*)
-    case $cc_basename in
-      ec++*)
-	# FIXME: insert proper C++ library support
-	ld_shlibs_CXX=no
-	;;
-      ghcx*)
-	# Green Hills C++ Compiler
-	# FIXME: insert proper C++ library support
-	ld_shlibs_CXX=no
-	;;
-      *)
-	# FIXME: insert proper C++ library support
-	ld_shlibs_CXX=no
-	;;
-    esac
-    ;;
-  freebsd[12]*)
-    # C++ shared libraries reported to be fairly broken before switch to ELF
-    ld_shlibs_CXX=no
-    ;;
-  freebsd-elf*)
-    archive_cmds_need_lc_CXX=no
-    ;;
-  freebsd* | dragonfly*)
-    # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF
-    # conventions
-    ld_shlibs_CXX=yes
-    ;;
-  gnu*)
-    ;;
-  hpux9*)
-    hardcode_libdir_flag_spec_CXX='${wl}+b ${wl}$libdir'
-    hardcode_libdir_separator_CXX=:
-    export_dynamic_flag_spec_CXX='${wl}-E'
-    hardcode_direct_CXX=yes
-    hardcode_minus_L_CXX=yes # Not in the search PATH,
-				# but as the default
-				# location of the library.
-
-    case $cc_basename in
-    CC*)
-      # FIXME: insert proper C++ library support
-      ld_shlibs_CXX=no
       ;;
-    aCC*)
-      archive_cmds_CXX='$rm $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
-      # Commands to make compiler produce verbose output that lists
-      # what "hidden" libraries, object files and flags are used when
-      # linking a shared library.
-      #
-      # There doesn't appear to be a way to prevent this compiler from
-      # explicitly linking system object files so we need to strip them
-      # from the output so that they don't get included in the library
-      # dependencies.
-      output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "[-]L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
+
+    dgux*)
+      archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      hardcode_libdir_flag_spec='-L$libdir'
+      hardcode_shlibpath_var=no
       ;;
-    *)
-      if test "$GXX" = yes; then
-        archive_cmds_CXX='$rm $output_objdir/$soname~$CC -shared -nostdlib -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+
+    freebsd1*)
+      ld_shlibs=no
+      ;;
+
+    # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
+    # support.  Future versions do this automatically, but an explicit c++rt0.o
+    # does not break anything, and helps significantly (at the cost of a little
+    # extra space).
+    freebsd2.2*)
+      archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
+      hardcode_libdir_flag_spec='-R$libdir'
+      hardcode_direct=yes
+      hardcode_shlibpath_var=no
+      ;;
+
+    # Unfortunately, older versions of FreeBSD 2 do not have this feature.
+    freebsd2*)
+      archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+      hardcode_direct=yes
+      hardcode_minus_L=yes
+      hardcode_shlibpath_var=no
+      ;;
+
+    # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
+    freebsd* | dragonfly*)
+      archive_cmds='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
+      hardcode_libdir_flag_spec='-R$libdir'
+      hardcode_direct=yes
+      hardcode_shlibpath_var=no
+      ;;
+
+    hpux9*)
+      if test "$GCC" = yes; then
+	archive_cmds='$RM $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
       else
-        # FIXME: insert proper C++ library support
-        ld_shlibs_CXX=no
+	archive_cmds='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
       fi
-      ;;
-    esac
-    ;;
-  hpux10*|hpux11*)
-    if test $with_gnu_ld = no; then
-      hardcode_libdir_flag_spec_CXX='${wl}+b ${wl}$libdir'
-      hardcode_libdir_separator_CXX=:
+      hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
+      hardcode_libdir_separator=:
+      hardcode_direct=yes
 
-      case $host_cpu in
-      hppa*64*|ia64*) ;;
-      *)
-	export_dynamic_flag_spec_CXX='${wl}-E'
-        ;;
-      esac
-    fi
-    case $host_cpu in
-    hppa*64*|ia64*)
-      hardcode_direct_CXX=no
-      hardcode_shlibpath_var_CXX=no
+      # hardcode_minus_L: Not really in the search PATH,
+      # but as the default location of the library.
+      hardcode_minus_L=yes
+      export_dynamic_flag_spec='${wl}-E'
       ;;
-    *)
-      hardcode_direct_CXX=yes
-      hardcode_minus_L_CXX=yes # Not in the search PATH,
-					      # but as the default
-					      # location of the library.
+
+    hpux10*)
+      if test "$GCC" = yes -a "$with_gnu_ld" = no; then
+	archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+      else
+	archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
+      fi
+      if test "$with_gnu_ld" = no; then
+	hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
+	hardcode_libdir_flag_spec_ld='+b $libdir'
+	hardcode_libdir_separator=:
+	hardcode_direct=yes
+	hardcode_direct_absolute=yes
+	export_dynamic_flag_spec='${wl}-E'
+	# hardcode_minus_L: Not really in the search PATH,
+	# but as the default location of the library.
+	hardcode_minus_L=yes
+      fi
       ;;
-    esac
 
-    case $cc_basename in
-      CC*)
-	# FIXME: insert proper C++ library support
-	ld_shlibs_CXX=no
-	;;
-      aCC*)
+    hpux11*)
+      if test "$GCC" = yes -a "$with_gnu_ld" = no; then
 	case $host_cpu in
 	hppa*64*)
-	  archive_cmds_CXX='$CC -b ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	  archive_cmds='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
 	  ;;
 	ia64*)
-	  archive_cmds_CXX='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	  archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
 	  ;;
 	*)
-	  archive_cmds_CXX='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	  archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
 	  ;;
 	esac
-	# Commands to make compiler produce verbose output that lists
-	# what "hidden" libraries, object files and flags are used when
-	# linking a shared library.
-	#
-	# There doesn't appear to be a way to prevent this compiler from
-	# explicitly linking system object files so we need to strip them
-	# from the output so that they don't get included in the library
-	# dependencies.
-	output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
-	;;
-      *)
-	if test "$GXX" = yes; then
-	  if test $with_gnu_ld = no; then
-	    case $host_cpu in
-	    hppa*64*)
-	      archive_cmds_CXX='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-	      ;;
-	    ia64*)
-	      archive_cmds_CXX='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-	      ;;
-	    *)
-	      archive_cmds_CXX='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-	      ;;
-	    esac
-	  fi
-	else
-	  # FIXME: insert proper C++ library support
-	  ld_shlibs_CXX=no
-	fi
-	;;
-    esac
-    ;;
-  interix[3-9]*)
-    hardcode_direct_CXX=no
-    hardcode_shlibpath_var_CXX=no
-    hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir'
-    export_dynamic_flag_spec_CXX='${wl}-E'
-    # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
-    # Instead, shared libraries are loaded at an image base (0x10000000 by
-    # default) and relocated if they conflict, which is a slow very memory
-    # consuming and fragmenting process.  To avoid this, we pick a random,
-    # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
-    # time.  Moving up from 0x10000000 also allows more sbrk(2) space.
-    archive_cmds_CXX='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
-    archive_expsym_cmds_CXX='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
-    ;;
-  irix5* | irix6*)
-    case $cc_basename in
-      CC*)
-	# SGI C++
-	archive_cmds_CXX='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-
-	# Archives containing C++ object files must be created using
-	# "CC -ar", where "CC" is the IRIX C++ compiler.  This is
-	# necessary to make sure instantiated templates are included
-	# in the archive.
-	old_archive_cmds_CXX='$CC -ar -WR,-u -o $oldlib $oldobjs'
-	;;
-      *)
-	if test "$GXX" = yes; then
-	  if test "$with_gnu_ld" = no; then
-	    archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-	  else
-	    archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` -o $lib'
-	  fi
-	fi
-	link_all_deplibs_CXX=yes
-	;;
-    esac
-    hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir'
-    hardcode_libdir_separator_CXX=:
-    ;;
-  linux* | k*bsd*-gnu)
-    case $cc_basename in
-      KCC*)
-	# Kuck and Associates, Inc. (KAI) C++ Compiler
-
-	# KCC will only create a shared library if the output file
-	# ends with ".so" (or ".sl" for HP-UX), so rename the library
-	# to its proper name (with version) after linking.
-	archive_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
-	archive_expsym_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib'
-	# Commands to make compiler produce verbose output that lists
-	# what "hidden" libraries, object files and flags are used when
-	# linking a shared library.
-	#
-	# There doesn't appear to be a way to prevent this compiler from
-	# explicitly linking system object files so we need to strip them
-	# from the output so that they don't get included in the library
-	# dependencies.
-	output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | grep "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
-
-	hardcode_libdir_flag_spec_CXX='${wl}--rpath,$libdir'
-	export_dynamic_flag_spec_CXX='${wl}--export-dynamic'
-
-	# Archives containing C++ object files must be created using
-	# "CC -Bstatic", where "CC" is the KAI C++ compiler.
-	old_archive_cmds_CXX='$CC -Bstatic -o $oldlib $oldobjs'
-	;;
-      icpc*)
-	# Intel C++
-	with_gnu_ld=yes
-	# version 8.0 and above of icpc choke on multiply defined symbols
-	# if we add $predep_objects and $postdep_objects, however 7.1 and
-	# earlier do not add the objects themselves.
-	case `$CC -V 2>&1` in
-	*"Version 7."*)
-  	  archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
-  	  archive_expsym_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+      else
+	case $host_cpu in
+	hppa*64*)
+	  archive_cmds='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
 	  ;;
-	*)  # Version 8.0 or newer
-	  tmp_idyn=
-	  case $host_cpu in
-	    ia64*) tmp_idyn=' -i_dynamic';;
-	  esac
-  	  archive_cmds_CXX='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-	  archive_expsym_cmds_CXX='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+	ia64*)
+	  archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	*)
+	  archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
 	  ;;
 	esac
-	archive_cmds_need_lc_CXX=no
-	hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir'
-	export_dynamic_flag_spec_CXX='${wl}--export-dynamic'
-	whole_archive_flag_spec_CXX='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
-	;;
-      pgCC* | pgcpp*)
-        # Portland Group C++ compiler
-	archive_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
-  	archive_expsym_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
-
-	hardcode_libdir_flag_spec_CXX='${wl}--rpath ${wl}$libdir'
-	export_dynamic_flag_spec_CXX='${wl}--export-dynamic'
-	whole_archive_flag_spec_CXX='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
-        ;;
-      cxx*)
-	# Compaq C++
-	archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
-	archive_expsym_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname  -o $lib ${wl}-retain-symbols-file $wl$export_symbols'
-
-	runpath_var=LD_RUN_PATH
-	hardcode_libdir_flag_spec_CXX='-rpath $libdir'
-	hardcode_libdir_separator_CXX=:
+      fi
+      if test "$with_gnu_ld" = no; then
+	hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
+	hardcode_libdir_separator=:
 
-	# Commands to make compiler produce verbose output that lists
-	# what "hidden" libraries, object files and flags are used when
-	# linking a shared library.
-	#
-	# There doesn't appear to be a way to prevent this compiler from
-	# explicitly linking system object files so we need to strip them
-	# from the output so that they don't get included in the library
-	# dependencies.
-	output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
-	;;
-      *)
-	case `$CC -V 2>&1 | sed 5q` in
-	*Sun\ C*)
-	  # Sun C++ 5.9
-	  no_undefined_flag_CXX=' -zdefs'
-	  archive_cmds_CXX='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-	  archive_expsym_cmds_CXX='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file ${wl}$export_symbols'
-	  hardcode_libdir_flag_spec_CXX='-R$libdir'
-	  whole_archive_flag_spec_CXX='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
+	case $host_cpu in
+	hppa*64*|ia64*)
+	  hardcode_direct=no
+	  hardcode_shlibpath_var=no
+	  ;;
+	*)
+	  hardcode_direct=yes
+	  hardcode_direct_absolute=yes
+	  export_dynamic_flag_spec='${wl}-E'
 
-	  # Not sure whether something based on
-	  # $CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1
-	  # would be better.
-	  output_verbose_link_cmd='echo'
-
-	  # Archives containing C++ object files must be created using
-	  # "CC -xar", where "CC" is the Sun C++ compiler.  This is
-	  # necessary to make sure instantiated templates are included
-	  # in the archive.
-	  old_archive_cmds_CXX='$CC -xar -o $oldlib $oldobjs'
+	  # hardcode_minus_L: Not really in the search PATH,
+	  # but as the default location of the library.
+	  hardcode_minus_L=yes
 	  ;;
 	esac
-	;;
-    esac
-    ;;
-  lynxos*)
-    # FIXME: insert proper C++ library support
-    ld_shlibs_CXX=no
-    ;;
-  m88k*)
-    # FIXME: insert proper C++ library support
-    ld_shlibs_CXX=no
-    ;;
-  mvs*)
-    case $cc_basename in
-      cxx*)
-	# FIXME: insert proper C++ library support
-	ld_shlibs_CXX=no
-	;;
-      *)
-	# FIXME: insert proper C++ library support
-	ld_shlibs_CXX=no
-	;;
-    esac
-    ;;
-  netbsd*)
-    if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-      archive_cmds_CXX='$LD -Bshareable  -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags'
-      wlarc=
-      hardcode_libdir_flag_spec_CXX='-R$libdir'
-      hardcode_direct_CXX=yes
-      hardcode_shlibpath_var_CXX=no
-    fi
-    # Workaround some broken pre-1.5 toolchains
-    output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"'
-    ;;
-  openbsd2*)
-    # C++ shared libraries are fairly broken
-    ld_shlibs_CXX=no
-    ;;
-  openbsd*)
-    if test -f /usr/libexec/ld.so; then
-      hardcode_direct_CXX=yes
-      hardcode_shlibpath_var_CXX=no
-      archive_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
-      hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir'
-      if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-	archive_expsym_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib'
-	export_dynamic_flag_spec_CXX='${wl}-E'
-	whole_archive_flag_spec_CXX="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
       fi
-      output_verbose_link_cmd='echo'
-    else
-      ld_shlibs_CXX=no
-    fi
-    ;;
-  osf3*)
-    case $cc_basename in
-      KCC*)
-	# Kuck and Associates, Inc. (KAI) C++ Compiler
-
-	# KCC will only create a shared library if the output file
-	# ends with ".so" (or ".sl" for HP-UX), so rename the library
-	# to its proper name (with version) after linking.
-	archive_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
+      ;;
 
-	hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir'
-	hardcode_libdir_separator_CXX=:
+    irix5* | irix6* | nonstopux*)
+      if test "$GCC" = yes; then
+	archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+	# Try to use the -exported_symbol ld option, if it does not
+	# work, assume that -exports_file does not work either and
+	# implicitly export all symbols.
+        save_LDFLAGS="$LDFLAGS"
+        LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null"
+        cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+int foo(void) {}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib'
 
-	# Archives containing C++ object files must be created using
-	# "CC -Bstatic", where "CC" is the KAI C++ compiler.
-	old_archive_cmds_CXX='$CC -Bstatic -o $oldlib $oldobjs'
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+        LDFLAGS="$save_LDFLAGS"
+      else
+	archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
+	archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib'
+      fi
+      archive_cmds_need_lc='no'
+      hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+      hardcode_libdir_separator=:
+      inherit_rpath=yes
+      link_all_deplibs=yes
+      ;;
 
-	;;
-      RCC*)
-	# Rational C++ 2.4.1
-	# FIXME: insert proper C++ library support
-	ld_shlibs_CXX=no
-	;;
-      cxx*)
-	allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*'
-	archive_cmds_CXX='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && echo ${wl}-set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-
-	hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir'
-	hardcode_libdir_separator_CXX=:
-
-	# Commands to make compiler produce verbose output that lists
-	# what "hidden" libraries, object files and flags are used when
-	# linking a shared library.
-	#
-	# There doesn't appear to be a way to prevent this compiler from
-	# explicitly linking system object files so we need to strip them
-	# from the output so that they don't get included in the library
-	# dependencies.
-	output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
-	;;
-      *)
-	if test "$GXX" = yes && test "$with_gnu_ld" = no; then
-	  allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*'
-	  archive_cmds_CXX='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+    netbsd* | netbsdelf*-gnu)
+      if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+	archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'  # a.out
+      else
+	archive_cmds='$LD -shared -o $lib $libobjs $deplibs $linker_flags'      # ELF
+      fi
+      hardcode_libdir_flag_spec='-R$libdir'
+      hardcode_direct=yes
+      hardcode_shlibpath_var=no
+      ;;
 
-	  hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir'
-	  hardcode_libdir_separator_CXX=:
+    newsos6)
+      archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      hardcode_direct=yes
+      hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+      hardcode_libdir_separator=:
+      hardcode_shlibpath_var=no
+      ;;
 
-	  # Commands to make compiler produce verbose output that lists
-	  # what "hidden" libraries, object files and flags are used when
-	  # linking a shared library.
-	  output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"'
+    *nto* | *qnx*)
+      ;;
 
+    openbsd*)
+      if test -f /usr/libexec/ld.so; then
+	hardcode_direct=yes
+	hardcode_shlibpath_var=no
+	hardcode_direct_absolute=yes
+	if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+	  archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+	  archive_expsym_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
+	  hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
+	  export_dynamic_flag_spec='${wl}-E'
 	else
-	  # FIXME: insert proper C++ library support
-	  ld_shlibs_CXX=no
+	  case $host_os in
+	   openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*)
+	     archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+	     hardcode_libdir_flag_spec='-R$libdir'
+	     ;;
+	   *)
+	     archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+	     hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
+	     ;;
+	  esac
 	fi
-	;;
-    esac
-    ;;
-  osf4* | osf5*)
-    case $cc_basename in
-      KCC*)
-	# Kuck and Associates, Inc. (KAI) C++ Compiler
-
-	# KCC will only create a shared library if the output file
-	# ends with ".so" (or ".sl" for HP-UX), so rename the library
-	# to its proper name (with version) after linking.
-	archive_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
+      else
+	ld_shlibs=no
+      fi
+      ;;
 
-	hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir'
-	hardcode_libdir_separator_CXX=:
+    os2*)
+      hardcode_libdir_flag_spec='-L$libdir'
+      hardcode_minus_L=yes
+      allow_undefined_flag=unsupported
+      archive_cmds='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$ECHO DATA >> $output_objdir/$libname.def~$ECHO " SINGLE NONSHARED" >> $output_objdir/$libname.def~$ECHO EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
+      old_archive_from_new_cmds='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
+      ;;
 
-	# Archives containing C++ object files must be created using
-	# the KAI C++ compiler.
-	old_archive_cmds_CXX='$CC -o $oldlib $oldobjs'
-	;;
-      RCC*)
-	# Rational C++ 2.4.1
-	# FIXME: insert proper C++ library support
-	ld_shlibs_CXX=no
-	;;
-      cxx*)
-	allow_undefined_flag_CXX=' -expect_unresolved \*'
-	archive_cmds_CXX='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-	archive_expsym_cmds_CXX='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~
-	  echo "-hidden">> $lib.exp~
-	  $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname -Wl,-input -Wl,$lib.exp  `test -n "$verstring" && echo -set_version	$verstring` -update_registry ${output_objdir}/so_locations -o $lib~
-	  $rm $lib.exp'
-
-	hardcode_libdir_flag_spec_CXX='-rpath $libdir'
-	hardcode_libdir_separator_CXX=:
-
-	# Commands to make compiler produce verbose output that lists
-	# what "hidden" libraries, object files and flags are used when
-	# linking a shared library.
-	#
-	# There doesn't appear to be a way to prevent this compiler from
-	# explicitly linking system object files so we need to strip them
-	# from the output so that they don't get included in the library
-	# dependencies.
-	output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
-	;;
-      *)
-	if test "$GXX" = yes && test "$with_gnu_ld" = no; then
-	  allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*'
-	 archive_cmds_CXX='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+    osf3*)
+      if test "$GCC" = yes; then
+	allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
+	archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+      else
+	allow_undefined_flag=' -expect_unresolved \*'
+	archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
+      fi
+      archive_cmds_need_lc='no'
+      hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+      hardcode_libdir_separator=:
+      ;;
 
-	  hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir'
-	  hardcode_libdir_separator_CXX=:
+    osf4* | osf5*)	# as osf3* with the addition of -msym flag
+      if test "$GCC" = yes; then
+	allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
+	archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+	hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+      else
+	allow_undefined_flag=' -expect_unresolved \*'
+	archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
+	archive_expsym_cmds='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~
+	$CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp'
 
-	  # Commands to make compiler produce verbose output that lists
-	  # what "hidden" libraries, object files and flags are used when
-	  # linking a shared library.
-	  output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"'
+	# Both c and cxx compiler support -rpath directly
+	hardcode_libdir_flag_spec='-rpath $libdir'
+      fi
+      archive_cmds_need_lc='no'
+      hardcode_libdir_separator=:
+      ;;
 
+    solaris*)
+      no_undefined_flag=' -z defs'
+      if test "$GCC" = yes; then
+	wlarc='${wl}'
+	archive_cmds='$CC -shared ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+	  $CC -shared ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
+      else
+	case `$CC -V 2>&1` in
+	*"Compilers 5.0"*)
+	  wlarc=''
+	  archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	  archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+	  $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp'
+	  ;;
+	*)
+	  wlarc='${wl}'
+	  archive_cmds='$CC -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $compiler_flags'
+	  archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+	  $CC -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
+	  ;;
+	esac
+      fi
+      hardcode_libdir_flag_spec='-R$libdir'
+      hardcode_shlibpath_var=no
+      case $host_os in
+      solaris2.[0-5] | solaris2.[0-5].*) ;;
+      *)
+	# The compiler driver will combine and reorder linker options,
+	# but understands `-z linker_flag'.  GCC discards it without `$wl',
+	# but is careful enough not to reorder.
+	# Supported since Solaris 2.6 (maybe 2.5.1?)
+	if test "$GCC" = yes; then
+	  whole_archive_flag_spec='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
 	else
-	  # FIXME: insert proper C++ library support
-	  ld_shlibs_CXX=no
+	  whole_archive_flag_spec='-z allextract$convenience -z defaultextract'
 	fi
 	;;
-    esac
-    ;;
-  psos*)
-    # FIXME: insert proper C++ library support
-    ld_shlibs_CXX=no
-    ;;
-  sunos4*)
-    case $cc_basename in
-      CC*)
-	# Sun C++ 4.x
-	# FIXME: insert proper C++ library support
-	ld_shlibs_CXX=no
-	;;
-      lcc*)
-	# Lucid
-	# FIXME: insert proper C++ library support
-	ld_shlibs_CXX=no
+      esac
+      link_all_deplibs=yes
+      ;;
+
+    sunos4*)
+      if test "x$host_vendor" = xsequent; then
+	# Use $CC to link under sequent, because it throws in some extra .o
+	# files that make .init and .fini sections work.
+	archive_cmds='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
+      else
+	archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
+      fi
+      hardcode_libdir_flag_spec='-L$libdir'
+      hardcode_direct=yes
+      hardcode_minus_L=yes
+      hardcode_shlibpath_var=no
+      ;;
+
+    sysv4)
+      case $host_vendor in
+	sni)
+	  archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	  hardcode_direct=yes # is this really true???
 	;;
-      *)
-	# FIXME: insert proper C++ library support
-	ld_shlibs_CXX=no
+	siemens)
+	  ## LD is ld it makes a PLAMLIB
+	  ## CC just makes a GrossModule.
+	  archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags'
+	  reload_cmds='$CC -r -o $output$reload_objs'
+	  hardcode_direct=no
+        ;;
+	motorola)
+	  archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	  hardcode_direct=no #Motorola manual says yes, but my tests say they lie
 	;;
-    esac
-    ;;
-  solaris*)
-    case $cc_basename in
-      CC*)
-	# Sun C++ 4.2, 5.x and Centerline C++
-        archive_cmds_need_lc_CXX=yes
-	no_undefined_flag_CXX=' -zdefs'
-	archive_cmds_CXX='$CC -G${allow_undefined_flag}  -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-	archive_expsym_cmds_CXX='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-	$CC -G${allow_undefined_flag}  ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'
+      esac
+      runpath_var='LD_RUN_PATH'
+      hardcode_shlibpath_var=no
+      ;;
 
-	hardcode_libdir_flag_spec_CXX='-R$libdir'
-	hardcode_shlibpath_var_CXX=no
-	case $host_os in
-	  solaris2.[0-5] | solaris2.[0-5].*) ;;
-	  *)
-	    # The compiler driver will combine and reorder linker options,
-	    # but understands `-z linker_flag'.
-	    # Supported since Solaris 2.6 (maybe 2.5.1?)
-	    whole_archive_flag_spec_CXX='-z allextract$convenience -z defaultextract'
-	    ;;
-	esac
-	link_all_deplibs_CXX=yes
+    sysv4.3*)
+      archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      hardcode_shlibpath_var=no
+      export_dynamic_flag_spec='-Bexport'
+      ;;
 
-	output_verbose_link_cmd='echo'
+    sysv4*MP*)
+      if test -d /usr/nec; then
+	archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	hardcode_shlibpath_var=no
+	runpath_var=LD_RUN_PATH
+	hardcode_runpath_var=yes
+	ld_shlibs=yes
+      fi
+      ;;
 
-	# Archives containing C++ object files must be created using
-	# "CC -xar", where "CC" is the Sun C++ compiler.  This is
-	# necessary to make sure instantiated templates are included
-	# in the archive.
-	old_archive_cmds_CXX='$CC -xar -o $oldlib $oldobjs'
-	;;
-      gcx*)
-	# Green Hills C++ Compiler
-	archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
+    sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*)
+      no_undefined_flag='${wl}-z,text'
+      archive_cmds_need_lc=no
+      hardcode_shlibpath_var=no
+      runpath_var='LD_RUN_PATH'
 
-	# The C++ compiler must be used to create the archive.
-	old_archive_cmds_CXX='$CC $LDFLAGS -archive -o $oldlib $oldobjs'
-	;;
-      *)
-	# GNU C++ compiler with Solaris linker
-	if test "$GXX" = yes && test "$with_gnu_ld" = no; then
-	  no_undefined_flag_CXX=' ${wl}-z ${wl}defs'
-	  if $CC --version | grep -v '^2\.7' > /dev/null; then
-	    archive_cmds_CXX='$CC -shared -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
-	    archive_expsym_cmds_CXX='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-		$CC -shared -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'
+      if test "$GCC" = yes; then
+	archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+      else
+	archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+      fi
+      ;;
 
-	    # Commands to make compiler produce verbose output that lists
-	    # what "hidden" libraries, object files and flags are used when
-	    # linking a shared library.
-	    output_verbose_link_cmd="$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep \"\-L\""
-	  else
-	    # g++ 2.7 appears to require `-G' NOT `-shared' on this
-	    # platform.
-	    archive_cmds_CXX='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
-	    archive_expsym_cmds_CXX='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-		$CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'
+    sysv5* | sco3.2v5* | sco5v6*)
+      # Note: We can NOT use -z defs as we might desire, because we do not
+      # link with -lc, and that would cause any symbols used from libc to
+      # always be unresolved, which means just about no library would
+      # ever link correctly.  If we're not using GNU ld we use -z text
+      # though, which does catch some bad symbols but isn't as heavy-handed
+      # as -z defs.
+      no_undefined_flag='${wl}-z,text'
+      allow_undefined_flag='${wl}-z,nodefs'
+      archive_cmds_need_lc=no
+      hardcode_shlibpath_var=no
+      hardcode_libdir_flag_spec='${wl}-R,$libdir'
+      hardcode_libdir_separator=':'
+      link_all_deplibs=yes
+      export_dynamic_flag_spec='${wl}-Bexport'
+      runpath_var='LD_RUN_PATH'
 
-	    # Commands to make compiler produce verbose output that lists
-	    # what "hidden" libraries, object files and flags are used when
-	    # linking a shared library.
-	    output_verbose_link_cmd="$CC -G $CFLAGS -v conftest.$objext 2>&1 | grep \"\-L\""
-	  fi
+      if test "$GCC" = yes; then
+	archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+      else
+	archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+      fi
+      ;;
 
-	  hardcode_libdir_flag_spec_CXX='${wl}-R $wl$libdir'
-	  case $host_os in
-	  solaris2.[0-5] | solaris2.[0-5].*) ;;
-	  *)
-	    whole_archive_flag_spec_CXX='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
-	    ;;
-	  esac
-	fi
-	;;
-    esac
-    ;;
-  sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*)
-    no_undefined_flag_CXX='${wl}-z,text'
-    archive_cmds_need_lc_CXX=no
-    hardcode_shlibpath_var_CXX=no
-    runpath_var='LD_RUN_PATH'
-
-    case $cc_basename in
-      CC*)
-	archive_cmds_CXX='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-	archive_expsym_cmds_CXX='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-	;;
-      *)
-	archive_cmds_CXX='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-	archive_expsym_cmds_CXX='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-	;;
+    uts4*)
+      archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      hardcode_libdir_flag_spec='-L$libdir'
+      hardcode_shlibpath_var=no
+      ;;
+
+    *)
+      ld_shlibs=no
+      ;;
     esac
-    ;;
-  sysv5* | sco3.2v5* | sco5v6*)
-    # Note: We can NOT use -z defs as we might desire, because we do not
-    # link with -lc, and that would cause any symbols used from libc to
-    # always be unresolved, which means just about no library would
-    # ever link correctly.  If we're not using GNU ld we use -z text
-    # though, which does catch some bad symbols but isn't as heavy-handed
-    # as -z defs.
-    # For security reasons, it is highly recommended that you always
-    # use absolute paths for naming shared libraries, and exclude the
-    # DT_RUNPATH tag from executables and libraries.  But doing so
-    # requires that you compile everything twice, which is a pain.
-    # So that behaviour is only enabled if SCOABSPATH is set to a
-    # non-empty value in the environment.  Most likely only useful for
-    # creating official distributions of packages.
-    # This is a hack until libtool officially supports absolute path
-    # names for shared libraries.
-    no_undefined_flag_CXX='${wl}-z,text'
-    allow_undefined_flag_CXX='${wl}-z,nodefs'
-    archive_cmds_need_lc_CXX=no
-    hardcode_shlibpath_var_CXX=no
-    hardcode_libdir_flag_spec_CXX='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`'
-    hardcode_libdir_separator_CXX=':'
-    link_all_deplibs_CXX=yes
-    export_dynamic_flag_spec_CXX='${wl}-Bexport'
-    runpath_var='LD_RUN_PATH'
-
-    case $cc_basename in
-      CC*)
-	archive_cmds_CXX='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
-	archive_expsym_cmds_CXX='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
-	;;
-      *)
-	archive_cmds_CXX='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
-	archive_expsym_cmds_CXX='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
+
+    if test x$host_vendor = xsni; then
+      case $host in
+      sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
+	export_dynamic_flag_spec='${wl}-Blargedynsym'
 	;;
-    esac
-    ;;
-  tandem*)
-    case $cc_basename in
-      NCC*)
-	# NonStop-UX NCC 3.20
-	# FIXME: insert proper C++ library support
-	ld_shlibs_CXX=no
-	;;
-      *)
-	# FIXME: insert proper C++ library support
-	ld_shlibs_CXX=no
-	;;
-    esac
-    ;;
-  vxworks*)
-    # FIXME: insert proper C++ library support
-    ld_shlibs_CXX=no
-    ;;
-  *)
-    # FIXME: insert proper C++ library support
-    ld_shlibs_CXX=no
-    ;;
-esac
-{ $as_echo "$as_me:$LINENO: result: $ld_shlibs_CXX" >&5
-$as_echo "$ld_shlibs_CXX" >&6; }
-test "$ld_shlibs_CXX" = no && can_build_shared=no
+      esac
+    fi
+  fi
 
-GCC_CXX="$GXX"
-LD_CXX="$LD"
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ld_shlibs" >&5
+$as_echo "$ld_shlibs" >&6; }
+test "$ld_shlibs" = no && can_build_shared=no
 
-cat > conftest.$ac_ext <<EOF
-class Foo
-{
-public:
-  Foo (void) { a = 0; }
-private:
-  int a;
-};
-EOF
+with_gnu_ld=$with_gnu_ld
 
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; then
-  # Parse the compiler output and extract the necessary
-  # objects, libraries and library flags.
 
-  # Sentinel used to keep track of whether or not we are before
-  # the conftest object file.
-  pre_test_object_deps_done=no
 
-  # The `*' in the case matches for architectures that use `case' in
-  # $output_verbose_cmd can trigger glob expansion during the loop
-  # eval without this substitution.
-  output_verbose_link_cmd=`$echo "X$output_verbose_link_cmd" | $Xsed -e "$no_glob_subst"`
 
-  for p in `eval $output_verbose_link_cmd`; do
-    case $p in
 
-    -L* | -R* | -l*)
-       # Some compilers place space between "-{L,R}" and the path.
-       # Remove the space.
-       if test $p = "-L" \
-	  || test $p = "-R"; then
-	 prev=$p
-	 continue
-       else
-	 prev=
-       fi
 
-       if test "$pre_test_object_deps_done" = no; then
-	 case $p in
-	 -L* | -R*)
-	   # Internal compiler library paths should come after those
-	   # provided the user.  The postdeps already come after the
-	   # user supplied libs so there is no need to process them.
-	   if test -z "$compiler_lib_search_path_CXX"; then
-	     compiler_lib_search_path_CXX="${prev}${p}"
-	   else
-	     compiler_lib_search_path_CXX="${compiler_lib_search_path_CXX} ${prev}${p}"
-	   fi
-	   ;;
-	 # The "-l" case would never come before the object being
-	 # linked, so don't bother handling this case.
-	 esac
-       else
-	 if test -z "$postdeps_CXX"; then
-	   postdeps_CXX="${prev}${p}"
-	 else
-	   postdeps_CXX="${postdeps_CXX} ${prev}${p}"
-	 fi
-       fi
-       ;;
 
-    *.$objext)
-       # This assumes that the test object file only shows up
-       # once in the compiler output.
-       if test "$p" = "conftest.$objext"; then
-	 pre_test_object_deps_done=yes
-	 continue
-       fi
 
-       if test "$pre_test_object_deps_done" = no; then
-	 if test -z "$predep_objects_CXX"; then
-	   predep_objects_CXX="$p"
-	 else
-	   predep_objects_CXX="$predep_objects_CXX $p"
-	 fi
-       else
-	 if test -z "$postdep_objects_CXX"; then
-	   postdep_objects_CXX="$p"
-	 else
-	   postdep_objects_CXX="$postdep_objects_CXX $p"
-	 fi
-       fi
-       ;;
 
-    *) ;; # Ignore the rest.
 
-    esac
-  done
 
-  # Clean up.
-  rm -f a.out a.exe
-else
-  echo "libtool.m4: error: problem compiling CXX test program"
-fi
 
-$rm -f confest.$objext
 
-compiler_lib_search_dirs_CXX=
-if test -n "$compiler_lib_search_path_CXX"; then
-  compiler_lib_search_dirs_CXX=`echo " ${compiler_lib_search_path_CXX}" | ${SED} -e 's! -L! !g' -e 's!^ !!'`
-fi
 
-# PORTME: override above test on systems where it is broken
-case $host_os in
-interix[3-9]*)
-  # Interix 3.5 installs completely hosed .la files for C++, so rather than
-  # hack all around it, let's just trust "g++" to DTRT.
-  predep_objects_CXX=
-  postdep_objects_CXX=
-  postdeps_CXX=
-  ;;
 
-linux*)
-  case `$CC -V 2>&1 | sed 5q` in
-  *Sun\ C*)
-    # Sun C++ 5.9
-    #
-    # The more standards-conforming stlport4 library is
-    # incompatible with the Cstd library. Avoid specifying
-    # it if it's in CXXFLAGS. Ignore libCrun as
-    # -library=stlport4 depends on it.
-    case " $CXX $CXXFLAGS " in
-    *" -library=stlport4 "*)
-      solaris_use_stlport4=yes
+#
+# Do we need to explicitly link libc?
+#
+case "x$archive_cmds_need_lc" in
+x|xyes)
+  # Assume -lc should be added
+  archive_cmds_need_lc=yes
+
+  if test "$enable_shared" = yes && test "$GCC" = yes; then
+    case $archive_cmds in
+    *'~'*)
+      # FIXME: we may have to deal with multi-command sequences.
       ;;
-    esac
-    if test "$solaris_use_stlport4" != yes; then
-      postdeps_CXX='-library=Cstd -library=Crun'
-    fi
-    ;;
-  esac
-  ;;
+    '$CC '*)
+      # Test whether the compiler implicitly links with -lc since on some
+      # systems, -lgcc has to come before -lc. If gcc already passes -lc
+      # to ld, don't add -lc before -lgcc.
+      { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether -lc should be explicitly linked in" >&5
+$as_echo_n "checking whether -lc should be explicitly linked in... " >&6; }
+      $RM conftest*
+      echo "$lt_simple_compile_test_code" > conftest.$ac_ext
 
-solaris*)
-  case $cc_basename in
-  CC*)
-    # The more standards-conforming stlport4 library is
-    # incompatible with the Cstd library. Avoid specifying
-    # it if it's in CXXFLAGS. Ignore libCrun as
-    # -library=stlport4 depends on it.
-    case " $CXX $CXXFLAGS " in
-    *" -library=stlport4 "*)
-      solaris_use_stlport4=yes
+      if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } 2>conftest.err; then
+        soname=conftest
+        lib=conftest
+        libobjs=conftest.$ac_objext
+        deplibs=
+        wl=$lt_prog_compiler_wl
+	pic_flag=$lt_prog_compiler_pic
+        compiler_flags=-v
+        linker_flags=-v
+        verstring=
+        output_objdir=.
+        libname=conftest
+        lt_save_allow_undefined_flag=$allow_undefined_flag
+        allow_undefined_flag=
+        if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1\""; } >&5
+  (eval $archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }
+        then
+	  archive_cmds_need_lc=no
+        else
+	  archive_cmds_need_lc=yes
+        fi
+        allow_undefined_flag=$lt_save_allow_undefined_flag
+      else
+        cat conftest.err 1>&5
+      fi
+      $RM conftest*
+      { $as_echo "$as_me:${as_lineno-$LINENO}: result: $archive_cmds_need_lc" >&5
+$as_echo "$archive_cmds_need_lc" >&6; }
       ;;
     esac
-
-    # Adding this requires a known-good setup of shared libraries for
-    # Sun compiler versions before 5.6, else PIC objects from an old
-    # archive will be linked into the output, leading to subtle bugs.
-    if test "$solaris_use_stlport4" != yes; then
-      postdeps_CXX='-library=Cstd -library=Crun'
-    fi
-    ;;
-  esac
+  fi
   ;;
 esac
 
-case " $postdeps_CXX " in
-*" -lc "*) archive_cmds_need_lc_CXX=no ;;
-esac
 
-lt_prog_compiler_wl_CXX=
-lt_prog_compiler_pic_CXX=
-lt_prog_compiler_static_CXX=
 
-{ $as_echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5
-$as_echo_n "checking for $compiler option to produce PIC... " >&6; }
 
-  # C++ specific cases for pic, static, wl, etc.
-  if test "$GXX" = yes; then
-    lt_prog_compiler_wl_CXX='-Wl,'
-    lt_prog_compiler_static_CXX='-static'
 
-    case $host_os in
-    aix*)
-      # All AIX code is PIC.
-      if test "$host_cpu" = ia64; then
-	# AIX 5 now supports IA64 processor
-	lt_prog_compiler_static_CXX='-Bstatic'
-      fi
-      ;;
-    amigaos*)
-      # FIXME: we need at least 68020 code to build shared libraries, but
-      # adding the `-m68020' flag to GCC prevents building anything better,
-      # like `-m68040'.
-      lt_prog_compiler_pic_CXX='-m68020 -resident32 -malways-restore-a4'
-      ;;
-    beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
-      # PIC is the default for these OSes.
-      ;;
-    mingw* | cygwin* | os2* | pw32*)
-      # This hack is so that the source file can tell whether it is being
-      # built for inclusion in a dll (and should export symbols for example).
-      # Although the cygwin gcc ignores -fPIC, still need this for old-style
-      # (--disable-auto-import) libraries
-      lt_prog_compiler_pic_CXX='-DDLL_EXPORT'
-      ;;
-    darwin* | rhapsody*)
-      # PIC is the default on this platform
-      # Common symbols not allowed in MH_DYLIB files
-      lt_prog_compiler_pic_CXX='-fno-common'
-      ;;
-    *djgpp*)
-      # DJGPP does not support shared libraries at all
-      lt_prog_compiler_pic_CXX=
-      ;;
-    interix[3-9]*)
-      # Interix 3.x gcc -fpic/-fPIC options generate broken code.
-      # Instead, we relocate shared libraries at runtime.
-      ;;
-    sysv4*MP*)
-      if test -d /usr/nec; then
-	lt_prog_compiler_pic_CXX=-Kconform_pic
-      fi
-      ;;
-    hpux*)
-      # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
-      # not for PA HP-UX.
-      case $host_cpu in
-      hppa*64*|ia64*)
-	;;
-      *)
-	lt_prog_compiler_pic_CXX='-fPIC'
-	;;
-      esac
-      ;;
-    *)
-      lt_prog_compiler_pic_CXX='-fPIC'
-      ;;
-    esac
-  else
-    case $host_os in
-      aix[4-9]*)
-	# All AIX code is PIC.
-	if test "$host_cpu" = ia64; then
-	  # AIX 5 now supports IA64 processor
-	  lt_prog_compiler_static_CXX='-Bstatic'
-	else
-	  lt_prog_compiler_static_CXX='-bnso -bI:/lib/syscalls.exp'
-	fi
-	;;
-      chorus*)
-	case $cc_basename in
-	cxch68*)
-	  # Green Hills C++ Compiler
-	  # _LT_AC_TAGVAR(lt_prog_compiler_static, CXX)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a"
-	  ;;
-	esac
-	;;
-       darwin*)
-         # PIC is the default on this platform
-         # Common symbols not allowed in MH_DYLIB files
-         case $cc_basename in
-           xlc*)
-           lt_prog_compiler_pic_CXX='-qnocommon'
-           lt_prog_compiler_wl_CXX='-Wl,'
-           ;;
-         esac
-       ;;
-      dgux*)
-	case $cc_basename in
-	  ec++*)
-	    lt_prog_compiler_pic_CXX='-KPIC'
-	    ;;
-	  ghcx*)
-	    # Green Hills C++ Compiler
-	    lt_prog_compiler_pic_CXX='-pic'
-	    ;;
-	  *)
-	    ;;
-	esac
-	;;
-      freebsd* | dragonfly*)
-	# FreeBSD uses GNU C++
-	;;
-      hpux9* | hpux10* | hpux11*)
-	case $cc_basename in
-	  CC*)
-	    lt_prog_compiler_wl_CXX='-Wl,'
-	    lt_prog_compiler_static_CXX='${wl}-a ${wl}archive'
-	    if test "$host_cpu" != ia64; then
-	      lt_prog_compiler_pic_CXX='+Z'
-	    fi
-	    ;;
-	  aCC*)
-	    lt_prog_compiler_wl_CXX='-Wl,'
-	    lt_prog_compiler_static_CXX='${wl}-a ${wl}archive'
-	    case $host_cpu in
-	    hppa*64*|ia64*)
-	      # +Z the default
-	      ;;
-	    *)
-	      lt_prog_compiler_pic_CXX='+Z'
-	      ;;
-	    esac
-	    ;;
-	  *)
-	    ;;
-	esac
-	;;
-      interix*)
-	# This is c89, which is MS Visual C++ (no shared libs)
-	# Anyone wants to do a port?
-	;;
-      irix5* | irix6* | nonstopux*)
-	case $cc_basename in
-	  CC*)
-	    lt_prog_compiler_wl_CXX='-Wl,'
-	    lt_prog_compiler_static_CXX='-non_shared'
-	    # CC pic flag -KPIC is the default.
-	    ;;
-	  *)
-	    ;;
-	esac
-	;;
-      linux* | k*bsd*-gnu)
-	case $cc_basename in
-	  KCC*)
-	    # KAI C++ Compiler
-	    lt_prog_compiler_wl_CXX='--backend -Wl,'
-	    lt_prog_compiler_pic_CXX='-fPIC'
-	    ;;
-	  icpc* | ecpc*)
-	    # Intel C++
-	    lt_prog_compiler_wl_CXX='-Wl,'
-	    lt_prog_compiler_pic_CXX='-KPIC'
-	    lt_prog_compiler_static_CXX='-static'
-	    ;;
-	  pgCC* | pgcpp*)
-	    # Portland Group C++ compiler.
-	    lt_prog_compiler_wl_CXX='-Wl,'
-	    lt_prog_compiler_pic_CXX='-fpic'
-	    lt_prog_compiler_static_CXX='-Bstatic'
-	    ;;
-	  cxx*)
-	    # Compaq C++
-	    # Make sure the PIC flag is empty.  It appears that all Alpha
-	    # Linux and Compaq Tru64 Unix objects are PIC.
-	    lt_prog_compiler_pic_CXX=
-	    lt_prog_compiler_static_CXX='-non_shared'
-	    ;;
-	  *)
-	    case `$CC -V 2>&1 | sed 5q` in
-	    *Sun\ C*)
-	      # Sun C++ 5.9
-	      lt_prog_compiler_pic_CXX='-KPIC'
-	      lt_prog_compiler_static_CXX='-Bstatic'
-	      lt_prog_compiler_wl_CXX='-Qoption ld '
-	      ;;
-	    esac
-	    ;;
-	esac
-	;;
-      lynxos*)
-	;;
-      m88k*)
-	;;
-      mvs*)
-	case $cc_basename in
-	  cxx*)
-	    lt_prog_compiler_pic_CXX='-W c,exportall'
-	    ;;
-	  *)
-	    ;;
-	esac
-	;;
-      netbsd*)
-	;;
-      osf3* | osf4* | osf5*)
-	case $cc_basename in
-	  KCC*)
-	    lt_prog_compiler_wl_CXX='--backend -Wl,'
-	    ;;
-	  RCC*)
-	    # Rational C++ 2.4.1
-	    lt_prog_compiler_pic_CXX='-pic'
-	    ;;
-	  cxx*)
-	    # Digital/Compaq C++
-	    lt_prog_compiler_wl_CXX='-Wl,'
-	    # Make sure the PIC flag is empty.  It appears that all Alpha
-	    # Linux and Compaq Tru64 Unix objects are PIC.
-	    lt_prog_compiler_pic_CXX=
-	    lt_prog_compiler_static_CXX='-non_shared'
-	    ;;
-	  *)
-	    ;;
-	esac
-	;;
-      psos*)
-	;;
-      solaris*)
-	case $cc_basename in
-	  CC*)
-	    # Sun C++ 4.2, 5.x and Centerline C++
-	    lt_prog_compiler_pic_CXX='-KPIC'
-	    lt_prog_compiler_static_CXX='-Bstatic'
-	    lt_prog_compiler_wl_CXX='-Qoption ld '
-	    ;;
-	  gcx*)
-	    # Green Hills C++ Compiler
-	    lt_prog_compiler_pic_CXX='-PIC'
-	    ;;
-	  *)
-	    ;;
-	esac
-	;;
-      sunos4*)
-	case $cc_basename in
-	  CC*)
-	    # Sun C++ 4.x
-	    lt_prog_compiler_pic_CXX='-pic'
-	    lt_prog_compiler_static_CXX='-Bstatic'
-	    ;;
-	  lcc*)
-	    # Lucid
-	    lt_prog_compiler_pic_CXX='-pic'
-	    ;;
-	  *)
-	    ;;
-	esac
-	;;
-      tandem*)
-	case $cc_basename in
-	  NCC*)
-	    # NonStop-UX NCC 3.20
-	    lt_prog_compiler_pic_CXX='-KPIC'
-	    ;;
-	  *)
-	    ;;
-	esac
-	;;
-      sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
-	case $cc_basename in
-	  CC*)
-	    lt_prog_compiler_wl_CXX='-Wl,'
-	    lt_prog_compiler_pic_CXX='-KPIC'
-	    lt_prog_compiler_static_CXX='-Bstatic'
-	    ;;
-	esac
-	;;
-      vxworks*)
-	;;
-      *)
-	lt_prog_compiler_can_build_shared_CXX=no
-	;;
-    esac
-  fi
 
-{ $as_echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_CXX" >&5
-$as_echo "$lt_prog_compiler_pic_CXX" >&6; }
 
-#
-# Check to make sure the PIC flag actually works.
-#
-if test -n "$lt_prog_compiler_pic_CXX"; then
 
-{ $as_echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic_CXX works" >&5
-$as_echo_n "checking if $compiler PIC flag $lt_prog_compiler_pic_CXX works... " >&6; }
-if test "${lt_cv_prog_compiler_pic_works_CXX+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
-  lt_cv_prog_compiler_pic_works_CXX=no
-  ac_outfile=conftest.$ac_objext
-   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
-   lt_compiler_flag="$lt_prog_compiler_pic_CXX -DPIC"
-   # Insert the option either (1) after the last *FLAGS variable, or
-   # (2) before a word containing "conftest.", or (3) at the end.
-   # Note that $ac_compile itself does not contain backslashes and begins
-   # with a dollar sign (not a hyphen), so the echo should work correctly.
-   # The option is referenced via a variable to avoid confusing sed.
-   lt_compile=`echo "$ac_compile" | $SED \
-   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-   -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:14580: $lt_compile\"" >&5)
-   (eval "$lt_compile" 2>conftest.err)
-   ac_status=$?
-   cat conftest.err >&5
-   echo "$as_me:14584: \$? = $ac_status" >&5
-   if (exit $ac_status) && test -s "$ac_outfile"; then
-     # The compiler can only warn and ignore the option if not recognized
-     # So say no if there are warnings other than the usual output.
-     $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
-     $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
-     if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
-       lt_cv_prog_compiler_pic_works_CXX=yes
-     fi
-   fi
-   $rm conftest*
 
-fi
-{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_pic_works_CXX" >&5
-$as_echo "$lt_cv_prog_compiler_pic_works_CXX" >&6; }
 
-if test x"$lt_cv_prog_compiler_pic_works_CXX" = xyes; then
-    case $lt_prog_compiler_pic_CXX in
-     "" | " "*) ;;
-     *) lt_prog_compiler_pic_CXX=" $lt_prog_compiler_pic_CXX" ;;
-     esac
-else
-    lt_prog_compiler_pic_CXX=
-     lt_prog_compiler_can_build_shared_CXX=no
-fi
 
-fi
-case $host_os in
-  # For platforms which do not support PIC, -DPIC is meaningless:
-  *djgpp*)
-    lt_prog_compiler_pic_CXX=
-    ;;
-  *)
-    lt_prog_compiler_pic_CXX="$lt_prog_compiler_pic_CXX -DPIC"
-    ;;
-esac
 
-#
-# Check to make sure the static flag actually works.
-#
-wl=$lt_prog_compiler_wl_CXX eval lt_tmp_static_flag=\"$lt_prog_compiler_static_CXX\"
-{ $as_echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5
-$as_echo_n "checking if $compiler static flag $lt_tmp_static_flag works... " >&6; }
-if test "${lt_cv_prog_compiler_static_works_CXX+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
-  lt_cv_prog_compiler_static_works_CXX=no
-   save_LDFLAGS="$LDFLAGS"
-   LDFLAGS="$LDFLAGS $lt_tmp_static_flag"
-   echo "$lt_simple_link_test_code" > conftest.$ac_ext
-   if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
-     # The linker can only warn and ignore the option if not recognized
-     # So say no if there are warnings
-     if test -s conftest.err; then
-       # Append any errors to the config.log.
-       cat conftest.err 1>&5
-       $echo "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp
-       $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
-       if diff conftest.exp conftest.er2 >/dev/null; then
-         lt_cv_prog_compiler_static_works_CXX=yes
-       fi
-     else
-       lt_cv_prog_compiler_static_works_CXX=yes
-     fi
-   fi
-   $rm -r conftest*
-   LDFLAGS="$save_LDFLAGS"
 
-fi
-{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_static_works_CXX" >&5
-$as_echo "$lt_cv_prog_compiler_static_works_CXX" >&6; }
 
-if test x"$lt_cv_prog_compiler_static_works_CXX" = xyes; then
-    :
-else
-    lt_prog_compiler_static_CXX=
-fi
 
 
-{ $as_echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5
-$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; }
-if test "${lt_cv_prog_compiler_c_o_CXX+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
-  lt_cv_prog_compiler_c_o_CXX=no
-   $rm -r conftest 2>/dev/null
-   mkdir conftest
-   cd conftest
-   mkdir out
-   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
 
-   lt_compiler_flag="-o out/conftest2.$ac_objext"
-   # Insert the option either (1) after the last *FLAGS variable, or
-   # (2) before a word containing "conftest.", or (3) at the end.
-   # Note that $ac_compile itself does not contain backslashes and begins
-   # with a dollar sign (not a hyphen), so the echo should work correctly.
-   lt_compile=`echo "$ac_compile" | $SED \
-   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-   -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:14684: $lt_compile\"" >&5)
-   (eval "$lt_compile" 2>out/conftest.err)
-   ac_status=$?
-   cat out/conftest.err >&5
-   echo "$as_me:14688: \$? = $ac_status" >&5
-   if (exit $ac_status) && test -s out/conftest2.$ac_objext
-   then
-     # The compiler can only warn and ignore the option if not recognized
-     # So say no if there are warnings
-     $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
-     $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
-     if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
-       lt_cv_prog_compiler_c_o_CXX=yes
-     fi
-   fi
-   chmod u+w . 2>&5
-   $rm conftest*
-   # SGI C++ compiler will create directory out/ii_files/ for
-   # template instantiation
-   test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files
-   $rm out/* && rmdir out
-   cd ..
-   rmdir conftest
-   $rm conftest*
 
-fi
-{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o_CXX" >&5
-$as_echo "$lt_cv_prog_compiler_c_o_CXX" >&6; }
 
 
-hard_links="nottested"
-if test "$lt_cv_prog_compiler_c_o_CXX" = no && test "$need_locks" != no; then
-  # do not overwrite the value of need_locks provided by the user
-  { $as_echo "$as_me:$LINENO: checking if we can lock with hard links" >&5
-$as_echo_n "checking if we can lock with hard links... " >&6; }
-  hard_links=yes
-  $rm conftest*
-  ln conftest.a conftest.b 2>/dev/null && hard_links=no
-  touch conftest.a
-  ln conftest.a conftest.b 2>&5 || hard_links=no
-  ln conftest.a conftest.b 2>/dev/null && hard_links=no
-  { $as_echo "$as_me:$LINENO: result: $hard_links" >&5
-$as_echo "$hard_links" >&6; }
-  if test "$hard_links" = no; then
-    { $as_echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5
-$as_echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;}
-    need_locks=warn
-  fi
-else
-  need_locks=no
-fi
 
-{ $as_echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5
-$as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; }
 
-  export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
-  case $host_os in
-  aix[4-9]*)
-    # If we're using GNU nm, then we don't want the "-C" option.
-    # -C means demangle to AIX nm, but means don't demangle with GNU nm
-    if $NM -V 2>&1 | grep 'GNU' > /dev/null; then
-      export_symbols_cmds_CXX='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols'
-    else
-      export_symbols_cmds_CXX='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols'
-    fi
-    ;;
-  pw32*)
-    export_symbols_cmds_CXX="$ltdll_cmds"
-  ;;
-  cygwin* | mingw*)
-    export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/;/^.*[ ]__nm__/s/^.*[ ]__nm__\([^ ]*\)[ ][^ ]*/\1 DATA/;/^I[ ]/d;/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols'
-  ;;
-  linux* | k*bsd*-gnu)
-    link_all_deplibs_CXX=no
-  ;;
-  *)
-    export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
-  ;;
-  esac
-  exclude_expsyms_CXX='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'
 
-{ $as_echo "$as_me:$LINENO: result: $ld_shlibs_CXX" >&5
-$as_echo "$ld_shlibs_CXX" >&6; }
-test "$ld_shlibs_CXX" = no && can_build_shared=no
 
-#
-# Do we need to explicitly link libc?
-#
-case "x$archive_cmds_need_lc_CXX" in
-x|xyes)
-  # Assume -lc should be added
-  archive_cmds_need_lc_CXX=yes
 
-  if test "$enable_shared" = yes && test "$GCC" = yes; then
-    case $archive_cmds_CXX in
-    *'~'*)
-      # FIXME: we may have to deal with multi-command sequences.
-      ;;
-    '$CC '*)
-      # Test whether the compiler implicitly links with -lc since on some
-      # systems, -lgcc has to come before -lc. If gcc already passes -lc
-      # to ld, don't add -lc before -lgcc.
-      { $as_echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5
-$as_echo_n "checking whether -lc should be explicitly linked in... " >&6; }
-      $rm conftest*
-      echo "$lt_simple_compile_test_code" > conftest.$ac_ext
 
-      if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } 2>conftest.err; then
-        soname=conftest
-        lib=conftest
-        libobjs=conftest.$ac_objext
-        deplibs=
-        wl=$lt_prog_compiler_wl_CXX
-	pic_flag=$lt_prog_compiler_pic_CXX
-        compiler_flags=-v
-        linker_flags=-v
-        verstring=
-        output_objdir=.
-        libname=conftest
-        lt_save_allow_undefined_flag=$allow_undefined_flag_CXX
-        allow_undefined_flag_CXX=
-        if { (eval echo "$as_me:$LINENO: \"$archive_cmds_CXX 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1\"") >&5
-  (eval $archive_cmds_CXX 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) 2>&5
-  ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }
-        then
-	  archive_cmds_need_lc_CXX=no
-        else
-	  archive_cmds_need_lc_CXX=yes
-        fi
-        allow_undefined_flag_CXX=$lt_save_allow_undefined_flag
-      else
-        cat conftest.err 1>&5
-      fi
-      $rm conftest*
-      { $as_echo "$as_me:$LINENO: result: $archive_cmds_need_lc_CXX" >&5
-$as_echo "$archive_cmds_need_lc_CXX" >&6; }
-      ;;
-    esac
-  fi
-  ;;
-esac
 
-{ $as_echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5
-$as_echo_n "checking dynamic linker characteristics... " >&6; }
-library_names_spec=
-libname_spec='lib$name'
-soname_spec=
-shrext_cmds=".so"
-postinstall_cmds=
-postuninstall_cmds=
-finish_cmds=
-finish_eval=
-shlibpath_var=
-shlibpath_overrides_runpath=unknown
-version_type=none
-dynamic_linker="$host_os ld.so"
-sys_lib_dlsearch_path_spec="/lib /usr/lib"
 
-need_lib_prefix=unknown
-hardcode_into_libs=no
 
-# when you set need_version to no, make sure it does not cause -set_version
-# flags to be left without arguments
-need_version=unknown
 
-case $host_os in
-aix3*)
-  version_type=linux
-  library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
-  shlibpath_var=LIBPATH
 
-  # AIX 3 has no versioning support, so we append a major version to the name.
-  soname_spec='${libname}${release}${shared_ext}$major'
-  ;;
 
-aix[4-9]*)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  hardcode_into_libs=yes
-  if test "$host_cpu" = ia64; then
-    # AIX 5 supports IA64
-    library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
-    shlibpath_var=LD_LIBRARY_PATH
-  else
-    # With GCC up to 2.95.x, collect2 would create an import file
-    # for dependence libraries.  The import file would start with
-    # the line `#! .'.  This would cause the generated library to
-    # depend on `.', always an invalid library.  This was fixed in
-    # development snapshots of GCC prior to 3.0.
-    case $host_os in
-      aix4 | aix4.[01] | aix4.[01].*)
-      if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
-	   echo ' yes '
-	   echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then
-	:
-      else
-	can_build_shared=no
-      fi
-      ;;
-    esac
-    # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
-    # soname into executable. Probably we can add versioning support to
-    # collect2, so additional links can be useful in future.
-    if test "$aix_use_runtimelinking" = yes; then
-      # If using run time linking (on AIX 4.2 or later) use lib<name>.so
-      # instead of lib<name>.a to let people know that these are not
-      # typical AIX shared libraries.
-      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-    else
-      # We preserve .a as extension for shared libraries through AIX4.2
-      # and later when we are not doing run time linking.
-      library_names_spec='${libname}${release}.a $libname.a'
-      soname_spec='${libname}${release}${shared_ext}$major'
-    fi
-    shlibpath_var=LIBPATH
-  fi
-  ;;
 
-amigaos*)
-  library_names_spec='$libname.ixlibrary $libname.a'
-  # Create ${libname}_ixlibrary.a entries in /sys/libs.
-  finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
-  ;;
 
-beos*)
-  library_names_spec='${libname}${shared_ext}'
-  dynamic_linker="$host_os ld.so"
-  shlibpath_var=LIBRARY_PATH
-  ;;
 
-bsdi[45]*)
-  version_type=linux
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
-  shlibpath_var=LD_LIBRARY_PATH
-  sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
-  sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
-  # the default ld.so.conf also contains /usr/contrib/lib and
-  # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
-  # libtool to hard-code these into programs
-  ;;
 
-cygwin* | mingw* | pw32*)
-  version_type=windows
-  shrext_cmds=".dll"
-  need_version=no
-  need_lib_prefix=no
 
-  case $GCC,$host_os in
-  yes,cygwin* | yes,mingw* | yes,pw32*)
-    library_names_spec='$libname.dll.a'
-    # DLL is installed to $(libdir)/../bin by postinstall_cmds
-    postinstall_cmds='base_file=`basename \${file}`~
-      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~
-      dldir=$destdir/`dirname \$dlpath`~
-      test -d \$dldir || mkdir -p \$dldir~
-      $install_prog $dir/$dlname \$dldir/$dlname~
-      chmod a+x \$dldir/$dlname'
-    postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
-      dlpath=$dir/\$dldll~
-       $rm \$dlpath'
-    shlibpath_overrides_runpath=yes
 
-    case $host_os in
-    cygwin*)
-      # Cygwin DLLs use 'cyg' prefix rather than 'lib'
-      soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
-      sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib"
-      ;;
-    mingw*)
-      # MinGW DLLs use traditional 'lib' prefix
-      soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
-      sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
-      if echo "$sys_lib_search_path_spec" | grep ';[c-zC-Z]:/' >/dev/null; then
-        # It is most probably a Windows format PATH printed by
-        # mingw gcc, but we are running on Cygwin. Gcc prints its search
-        # path with ; separators, and with drive letters. We can handle the
-        # drive letters (cygwin fileutils understands them), so leave them,
-        # especially as we might pass files found there to a mingw objdump,
-        # which wouldn't understand a cygwinified path. Ahh.
-        sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
-      else
-        sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED  -e "s/$PATH_SEPARATOR/ /g"`
-      fi
-      ;;
-    pw32*)
-      # pw32 DLLs use 'pw' prefix rather than 'lib'
-      library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
-      ;;
-    esac
-    ;;
 
-  *)
-    library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib'
-    ;;
-  esac
-  dynamic_linker='Win32 ld.exe'
-  # FIXME: first we should search . and the directory the executable is in
-  shlibpath_var=PATH
-  ;;
 
-darwin* | rhapsody*)
-  dynamic_linker="$host_os dyld"
-  version_type=darwin
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext'
-  soname_spec='${libname}${release}${major}$shared_ext'
-  shlibpath_overrides_runpath=yes
-  shlibpath_var=DYLD_LIBRARY_PATH
-  shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
 
-  sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
-  ;;
 
-dgux*)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  ;;
 
-freebsd1*)
-  dynamic_linker=no
-  ;;
 
-freebsd* | dragonfly*)
-  # DragonFly does not have aout.  When/if they implement a new
-  # versioning mechanism, adjust this.
-  if test -x /usr/bin/objformat; then
-    objformat=`/usr/bin/objformat`
-  else
-    case $host_os in
-    freebsd[123]*) objformat=aout ;;
-    *) objformat=elf ;;
-    esac
-  fi
-  version_type=freebsd-$objformat
-  case $version_type in
-    freebsd-elf*)
-      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
-      need_version=no
-      need_lib_prefix=no
-      ;;
-    freebsd-*)
-      library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
-      need_version=yes
-      ;;
-  esac
-  shlibpath_var=LD_LIBRARY_PATH
-  case $host_os in
-  freebsd2*)
-    shlibpath_overrides_runpath=yes
-    ;;
-  freebsd3.[01]* | freebsdelf3.[01]*)
-    shlibpath_overrides_runpath=yes
-    hardcode_into_libs=yes
-    ;;
-  freebsd3.[2-9]* | freebsdelf3.[2-9]* | \
-  freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1)
-    shlibpath_overrides_runpath=no
-    hardcode_into_libs=yes
-    ;;
-  *) # from 4.6 on, and DragonFly
-    shlibpath_overrides_runpath=yes
-    hardcode_into_libs=yes
-    ;;
-  esac
-  ;;
 
-gnu*)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  hardcode_into_libs=yes
-  ;;
 
-hpux9* | hpux10* | hpux11*)
-  # Give a soname corresponding to the major version so that dld.sl refuses to
-  # link against other versions.
-  version_type=sunos
-  need_lib_prefix=no
-  need_version=no
-  case $host_cpu in
-  ia64*)
-    shrext_cmds='.so'
-    hardcode_into_libs=yes
-    dynamic_linker="$host_os dld.so"
-    shlibpath_var=LD_LIBRARY_PATH
-    shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
-    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-    soname_spec='${libname}${release}${shared_ext}$major'
-    if test "X$HPUX_IA64_MODE" = X32; then
-      sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
-    else
-      sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
-    fi
-    sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
-    ;;
-   hppa*64*)
-     shrext_cmds='.sl'
-     hardcode_into_libs=yes
-     dynamic_linker="$host_os dld.sl"
-     shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
-     shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
-     library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-     soname_spec='${libname}${release}${shared_ext}$major'
-     sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
-     sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
-     ;;
-   *)
-    shrext_cmds='.sl'
-    dynamic_linker="$host_os dld.sl"
-    shlibpath_var=SHLIB_PATH
-    shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
-    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-    soname_spec='${libname}${release}${shared_ext}$major'
-    ;;
-  esac
-  # HP-UX runs *really* slowly unless shared libraries are mode 555.
-  postinstall_cmds='chmod 555 $lib'
-  ;;
 
-interix[3-9]*)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=no
-  hardcode_into_libs=yes
-  ;;
 
-irix5* | irix6* | nonstopux*)
-  case $host_os in
-    nonstopux*) version_type=nonstopux ;;
-    *)
-	if test "$lt_cv_prog_gnu_ld" = yes; then
-		version_type=linux
-	else
-		version_type=irix
-	fi ;;
-  esac
-  need_lib_prefix=no
-  need_version=no
-  soname_spec='${libname}${release}${shared_ext}$major'
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
-  case $host_os in
-  irix5* | nonstopux*)
-    libsuff= shlibsuff=
-    ;;
-  *)
-    case $LD in # libtool.m4 will add one of these switches to LD
-    *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
-      libsuff= shlibsuff= libmagic=32-bit;;
-    *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
-      libsuff=32 shlibsuff=N32 libmagic=N32;;
-    *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
-      libsuff=64 shlibsuff=64 libmagic=64-bit;;
-    *) libsuff= shlibsuff= libmagic=never-match;;
-    esac
-    ;;
-  esac
-  shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
-  shlibpath_overrides_runpath=no
-  sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
-  sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
-  hardcode_into_libs=yes
-  ;;
 
-# No shared lib support for Linux oldld, aout, or coff.
-linux*oldld* | linux*aout* | linux*coff*)
-  dynamic_linker=no
-  ;;
 
-# This must be Linux ELF.
-linux* | k*bsd*-gnu)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=no
-  # This implies no fast_install, which is unacceptable.
-  # Some rework will be needed to allow for fast_install
-  # before this can be enabled.
-  hardcode_into_libs=yes
 
-  # find out which ABI we are using
-  libsuff=
-  case "$host_cpu" in
-  x86_64*|s390x*|powerpc64*)
-    echo '#line 15194 "configure"' > conftest.$ac_ext
-    if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; then
-      case `/usr/bin/file conftest.$ac_objext` in
-      *64-bit*)
-        libsuff=64
-        ;;
-      esac
-    fi
-    rm -rf conftest*
-    ;;
-  esac
 
-  sys_lib_dlsearch_path_spec="/lib${libsuff} /usr/lib${libsuff}"
 
-  # Append ld.so.conf contents to the search path
-  if test -f /etc/ld.so.conf; then
-    lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ 	]*hwcap[ 	]/d;s/[:,	]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
-    sys_lib_dlsearch_path_spec="$sys_lib_dlsearch_path_spec $lt_ld_extra"
-  fi
 
-  # We used to test for /lib/ld.so.1 and disable shared libraries on
-  # powerpc, because MkLinux only supported shared libraries with the
-  # GNU dynamic linker.  Since this was broken with cross compilers,
-  # most powerpc-linux boxes support dynamic linking these days and
-  # people can always --disable-shared, the test was removed, and we
-  # assume the GNU/Linux dynamic linker is in use.
-  dynamic_linker='GNU/Linux ld.so'
-  ;;
 
-netbsd*)
-  version_type=sunos
-  need_lib_prefix=no
-  need_version=no
-  if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
-    finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
-    dynamic_linker='NetBSD (a.out) ld.so'
-  else
-    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
-    soname_spec='${libname}${release}${shared_ext}$major'
-    dynamic_linker='NetBSD ld.elf_so'
-  fi
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
-  hardcode_into_libs=yes
-  ;;
 
-newsos6)
-  version_type=linux
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
-  ;;
 
-nto-qnx*)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
-  ;;
 
-openbsd*)
-  version_type=sunos
-  sys_lib_dlsearch_path_spec="/usr/lib"
-  need_lib_prefix=no
-  # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
-  case $host_os in
-    openbsd3.3 | openbsd3.3.*) need_version=yes ;;
-    *)                         need_version=no  ;;
-  esac
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
-  finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
-  shlibpath_var=LD_LIBRARY_PATH
-  if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-    case $host_os in
-      openbsd2.[89] | openbsd2.[89].*)
-	shlibpath_overrides_runpath=no
-	;;
-      *)
-	shlibpath_overrides_runpath=yes
-	;;
-      esac
-  else
-    shlibpath_overrides_runpath=yes
-  fi
-  ;;
 
-os2*)
-  libname_spec='$name'
-  shrext_cmds=".dll"
-  need_lib_prefix=no
-  library_names_spec='$libname${shared_ext} $libname.a'
-  dynamic_linker='OS/2 ld.exe'
-  shlibpath_var=LIBPATH
-  ;;
 
-osf3* | osf4* | osf5*)
-  version_type=osf
-  need_lib_prefix=no
-  need_version=no
-  soname_spec='${libname}${release}${shared_ext}$major'
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  shlibpath_var=LD_LIBRARY_PATH
-  sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
-  sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
-  ;;
 
-rdos*)
-  dynamic_linker=no
-  ;;
 
-solaris*)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
-  hardcode_into_libs=yes
-  # ldd complains unless libraries are executable
-  postinstall_cmds='chmod +x $lib'
-  ;;
 
-sunos4*)
-  version_type=sunos
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
-  finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
-  if test "$with_gnu_ld" = yes; then
-    need_lib_prefix=no
-  fi
-  need_version=yes
-  ;;
 
-sysv4 | sysv4.3*)
-  version_type=linux
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  case $host_vendor in
-    sni)
-      shlibpath_overrides_runpath=no
-      need_lib_prefix=no
-      export_dynamic_flag_spec='${wl}-Blargedynsym'
-      runpath_var=LD_RUN_PATH
-      ;;
-    siemens)
-      need_lib_prefix=no
-      ;;
-    motorola)
-      need_lib_prefix=no
-      need_version=no
-      shlibpath_overrides_runpath=no
-      sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
-      ;;
-  esac
-  ;;
 
-sysv4*MP*)
-  if test -d /usr/nec ;then
-    version_type=linux
-    library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
-    soname_spec='$libname${shared_ext}.$major'
-    shlibpath_var=LD_LIBRARY_PATH
-  fi
-  ;;
 
-sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
-  version_type=freebsd-elf
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  hardcode_into_libs=yes
-  if test "$with_gnu_ld" = yes; then
-    sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
-    shlibpath_overrides_runpath=no
-  else
-    sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
-    shlibpath_overrides_runpath=yes
-    case $host_os in
-      sco3.2v5*)
-        sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
-	;;
-    esac
-  fi
-  sys_lib_dlsearch_path_spec='/usr/lib'
-  ;;
 
-uts4*)
-  version_type=linux
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  ;;
 
-*)
-  dynamic_linker=no
-  ;;
-esac
-{ $as_echo "$as_me:$LINENO: result: $dynamic_linker" >&5
-$as_echo "$dynamic_linker" >&6; }
-test "$dynamic_linker" = no && can_build_shared=no
 
-if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
-  lt_cv_sys_lib_search_path_spec="$sys_lib_search_path_spec"
-fi
 
-sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec"
-if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
-  lt_cv_sys_lib_dlsearch_path_spec="$sys_lib_dlsearch_path_spec"
-fi
 
-sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec"
 
-variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
-if test "$GCC" = yes; then
-  variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
-fi
 
-{ $as_echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5
-$as_echo_n "checking how to hardcode library paths into programs... " >&6; }
-hardcode_action_CXX=
-if test -n "$hardcode_libdir_flag_spec_CXX" || \
-   test -n "$runpath_var_CXX" || \
-   test "X$hardcode_automatic_CXX" = "Xyes" ; then
 
-  # We can hardcode non-existant directories.
-  if test "$hardcode_direct_CXX" != no &&
-     # If the only mechanism to avoid hardcoding is shlibpath_var, we
-     # have to relink, otherwise we might link with an installed library
-     # when we should be linking with a yet-to-be-installed one
-     ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, CXX)" != no &&
-     test "$hardcode_minus_L_CXX" != no; then
-    # Linking always hardcodes the temporary library directory.
-    hardcode_action_CXX=relink
-  else
-    # We can link without hardcoding, and we can hardcode nonexisting dirs.
-    hardcode_action_CXX=immediate
-  fi
-else
-  # We cannot hardcode anything, or else we can only hardcode existing
-  # directories.
-  hardcode_action_CXX=unsupported
-fi
-{ $as_echo "$as_me:$LINENO: result: $hardcode_action_CXX" >&5
-$as_echo "$hardcode_action_CXX" >&6; }
 
-if test "$hardcode_action_CXX" = relink; then
-  # Fast installation is not supported
-  enable_fast_install=no
-elif test "$shlibpath_overrides_runpath" = yes ||
-     test "$enable_shared" = no; then
-  # Fast installation is not necessary
-  enable_fast_install=needless
-fi
 
 
-# The else clause should only fire when bootstrapping the
-# libtool distribution, otherwise you forgot to ship ltmain.sh
-# with your package, and you will get complaints that there are
-# no rules to generate ltmain.sh.
-if test -f "$ltmain"; then
-  # See if we are running on zsh, and set the options which allow our commands through
-  # without removal of \ escapes.
-  if test -n "${ZSH_VERSION+set}" ; then
-    setopt NO_GLOB_SUBST
-  fi
-  # Now quote all the things that may contain metacharacters while being
-  # careful not to overquote the AC_SUBSTed values.  We take copies of the
-  # variables and quote the copies for generation of the libtool script.
-  for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \
-    SED SHELL STRIP \
-    libname_spec library_names_spec soname_spec extract_expsyms_cmds \
-    old_striplib striplib file_magic_cmd finish_cmds finish_eval \
-    deplibs_check_method reload_flag reload_cmds need_locks \
-    lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \
-    lt_cv_sys_global_symbol_to_c_name_address \
-    sys_lib_search_path_spec sys_lib_dlsearch_path_spec \
-    old_postinstall_cmds old_postuninstall_cmds \
-    compiler_CXX \
-    CC_CXX \
-    LD_CXX \
-    lt_prog_compiler_wl_CXX \
-    lt_prog_compiler_pic_CXX \
-    lt_prog_compiler_static_CXX \
-    lt_prog_compiler_no_builtin_flag_CXX \
-    export_dynamic_flag_spec_CXX \
-    thread_safe_flag_spec_CXX \
-    whole_archive_flag_spec_CXX \
-    enable_shared_with_static_runtimes_CXX \
-    old_archive_cmds_CXX \
-    old_archive_from_new_cmds_CXX \
-    predep_objects_CXX \
-    postdep_objects_CXX \
-    predeps_CXX \
-    postdeps_CXX \
-    compiler_lib_search_path_CXX \
-    compiler_lib_search_dirs_CXX \
-    archive_cmds_CXX \
-    archive_expsym_cmds_CXX \
-    postinstall_cmds_CXX \
-    postuninstall_cmds_CXX \
-    old_archive_from_expsyms_cmds_CXX \
-    allow_undefined_flag_CXX \
-    no_undefined_flag_CXX \
-    export_symbols_cmds_CXX \
-    hardcode_libdir_flag_spec_CXX \
-    hardcode_libdir_flag_spec_ld_CXX \
-    hardcode_libdir_separator_CXX \
-    hardcode_automatic_CXX \
-    module_cmds_CXX \
-    module_expsym_cmds_CXX \
-    lt_cv_prog_compiler_c_o_CXX \
-    fix_srcfile_path_CXX \
-    exclude_expsyms_CXX \
-    include_expsyms_CXX; do
-
-    case $var in
-    old_archive_cmds_CXX | \
-    old_archive_from_new_cmds_CXX | \
-    archive_cmds_CXX | \
-    archive_expsym_cmds_CXX | \
-    module_cmds_CXX | \
-    module_expsym_cmds_CXX | \
-    old_archive_from_expsyms_cmds_CXX | \
-    export_symbols_cmds_CXX | \
-    extract_expsyms_cmds | reload_cmds | finish_cmds | \
-    postinstall_cmds | postuninstall_cmds | \
-    old_postinstall_cmds | old_postuninstall_cmds | \
-    sys_lib_search_path_spec | sys_lib_dlsearch_path_spec)
-      # Double-quote double-evaled strings.
-      eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\""
-      ;;
-    *)
-      eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\""
-      ;;
-    esac
-  done
 
-  case $lt_echo in
-  *'\$0 --fallback-echo"')
-    lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'`
-    ;;
-  esac
 
-cfgfile="$ofile"
 
-  cat <<__EOF__ >> "$cfgfile"
-# ### BEGIN LIBTOOL TAG CONFIG: $tagname
 
-# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
 
-# Shell to use when invoking shell scripts.
-SHELL=$lt_SHELL
 
-# Whether or not to build shared libraries.
-build_libtool_libs=$enable_shared
 
-# Whether or not to build static libraries.
-build_old_libs=$enable_static
 
-# Whether or not to add -lc for building shared libraries.
-build_libtool_need_lc=$archive_cmds_need_lc_CXX
 
-# Whether or not to disallow shared libs when runtime libs are static
-allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes_CXX
 
-# Whether or not to optimize for fast installation.
-fast_install=$enable_fast_install
 
-# The host system.
-host_alias=$host_alias
-host=$host
-host_os=$host_os
 
-# The build system.
-build_alias=$build_alias
-build=$build
-build_os=$build_os
 
-# An echo program that does not interpret backslashes.
-echo=$lt_echo
 
-# The archiver.
-AR=$lt_AR
-AR_FLAGS=$lt_AR_FLAGS
 
-# A C compiler.
-LTCC=$lt_LTCC
 
-# LTCC compiler flags.
-LTCFLAGS=$lt_LTCFLAGS
 
-# A language-specific compiler.
-CC=$lt_compiler_CXX
 
-# Is the compiler the GNU C compiler?
-with_gcc=$GCC_CXX
 
-# An ERE matcher.
-EGREP=$lt_EGREP
 
-# The linker used to build libraries.
-LD=$lt_LD_CXX
 
-# Whether we need hard or soft links.
-LN_S=$lt_LN_S
 
-# A BSD-compatible nm program.
-NM=$lt_NM
 
-# A symbol stripping program
-STRIP=$lt_STRIP
 
-# Used to examine libraries when file_magic_cmd begins "file"
-MAGIC_CMD=$MAGIC_CMD
 
-# Used on cygwin: DLL creation program.
-DLLTOOL="$DLLTOOL"
 
-# Used on cygwin: object dumper.
-OBJDUMP="$OBJDUMP"
 
-# Used on cygwin: assembler.
-AS="$AS"
 
-# The name of the directory that contains temporary libtool files.
-objdir=$objdir
 
-# How to create reloadable object files.
-reload_flag=$lt_reload_flag
-reload_cmds=$lt_reload_cmds
 
-# How to pass a linker flag through the compiler.
-wl=$lt_lt_prog_compiler_wl_CXX
 
-# Object file suffix (normally "o").
-objext="$ac_objext"
 
-# Old archive suffix (normally "a").
-libext="$libext"
 
-# Shared library suffix (normally ".so").
-shrext_cmds='$shrext_cmds'
 
-# Executable file suffix (normally "").
-exeext="$exeext"
 
-# Additional compiler flags for building library objects.
-pic_flag=$lt_lt_prog_compiler_pic_CXX
-pic_mode=$pic_mode
 
-# What is the maximum length of a command?
-max_cmd_len=$lt_cv_sys_max_cmd_len
 
-# Does compiler simultaneously support -c and -o options?
-compiler_c_o=$lt_lt_cv_prog_compiler_c_o_CXX
 
-# Must we lock files when doing compilation?
-need_locks=$lt_need_locks
 
-# Do we need the lib prefix for modules?
-need_lib_prefix=$need_lib_prefix
 
-# Do we need a version for libraries?
-need_version=$need_version
 
-# Whether dlopen is supported.
-dlopen_support=$enable_dlopen
 
-# Whether dlopen of programs is supported.
-dlopen_self=$enable_dlopen_self
 
-# Whether dlopen of statically linked programs is supported.
-dlopen_self_static=$enable_dlopen_self_static
 
-# Compiler flag to prevent dynamic linking.
-link_static_flag=$lt_lt_prog_compiler_static_CXX
 
-# Compiler flag to turn off builtin functions.
-no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_CXX
 
-# Compiler flag to allow reflexive dlopens.
-export_dynamic_flag_spec=$lt_export_dynamic_flag_spec_CXX
 
-# Compiler flag to generate shared objects directly from archives.
-whole_archive_flag_spec=$lt_whole_archive_flag_spec_CXX
 
-# Compiler flag to generate thread-safe objects.
-thread_safe_flag_spec=$lt_thread_safe_flag_spec_CXX
 
-# Library versioning type.
-version_type=$version_type
 
-# Format of library name prefix.
-libname_spec=$lt_libname_spec
 
-# List of archive names.  First name is the real one, the rest are links.
-# The last name is the one that the linker finds with -lNAME.
-library_names_spec=$lt_library_names_spec
 
-# The coded name of the library, if different from the real name.
-soname_spec=$lt_soname_spec
 
-# Commands used to build and install an old-style archive.
-RANLIB=$lt_RANLIB
-old_archive_cmds=$lt_old_archive_cmds_CXX
-old_postinstall_cmds=$lt_old_postinstall_cmds
-old_postuninstall_cmds=$lt_old_postuninstall_cmds
-
-# Create an old-style archive from a shared archive.
-old_archive_from_new_cmds=$lt_old_archive_from_new_cmds_CXX
-
-# Create a temporary old-style archive to link instead of a shared archive.
-old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds_CXX
-
-# Commands used to build and install a shared archive.
-archive_cmds=$lt_archive_cmds_CXX
-archive_expsym_cmds=$lt_archive_expsym_cmds_CXX
-postinstall_cmds=$lt_postinstall_cmds
-postuninstall_cmds=$lt_postuninstall_cmds
-
-# Commands used to build a loadable module (assumed same as above if empty)
-module_cmds=$lt_module_cmds_CXX
-module_expsym_cmds=$lt_module_expsym_cmds_CXX
-
-# Commands to strip libraries.
-old_striplib=$lt_old_striplib
-striplib=$lt_striplib
-
-# Dependencies to place before the objects being linked to create a
-# shared library.
-predep_objects=$lt_predep_objects_CXX
-
-# Dependencies to place after the objects being linked to create a
-# shared library.
-postdep_objects=$lt_postdep_objects_CXX
-
-# Dependencies to place before the objects being linked to create a
-# shared library.
-predeps=$lt_predeps_CXX
-
-# Dependencies to place after the objects being linked to create a
-# shared library.
-postdeps=$lt_postdeps_CXX
-
-# The directories searched by this compiler when creating a shared
-# library
-compiler_lib_search_dirs=$lt_compiler_lib_search_dirs_CXX
 
-# The library search path used internally by the compiler when linking
-# a shared library.
-compiler_lib_search_path=$lt_compiler_lib_search_path_CXX
-
-# Method to check whether dependent libraries are shared objects.
-deplibs_check_method=$lt_deplibs_check_method
-
-# Command to use when deplibs_check_method == file_magic.
-file_magic_cmd=$lt_file_magic_cmd
-
-# Flag that allows shared libraries with undefined symbols to be built.
-allow_undefined_flag=$lt_allow_undefined_flag_CXX
-
-# Flag that forces no undefined symbols.
-no_undefined_flag=$lt_no_undefined_flag_CXX
-
-# Commands used to finish a libtool library installation in a directory.
-finish_cmds=$lt_finish_cmds
 
-# Same as above, but a single script fragment to be evaled but not shown.
-finish_eval=$lt_finish_eval
-
-# Take the output of nm and produce a listing of raw symbols and C names.
-global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe
-
-# Transform the output of nm in a proper C declaration
-global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl
-
-# Transform the output of nm in a C name address pair
-global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
 
-# This is the shared library runtime path variable.
-runpath_var=$runpath_var
 
-# This is the shared library path variable.
-shlibpath_var=$shlibpath_var
 
-# Is shlibpath searched before the hard-coded library search path?
-shlibpath_overrides_runpath=$shlibpath_overrides_runpath
 
-# How to hardcode a shared library path into an executable.
-hardcode_action=$hardcode_action_CXX
 
-# Whether we should hardcode library paths into libraries.
-hardcode_into_libs=$hardcode_into_libs
 
-# Flag to hardcode \$libdir into a binary during linking.
-# This must work even if \$libdir does not exist.
-hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_CXX
 
-# If ld is used when linking, flag to hardcode \$libdir into
-# a binary during linking. This must work even if \$libdir does
-# not exist.
-hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_CXX
 
-# Whether we need a single -rpath flag with a separated argument.
-hardcode_libdir_separator=$lt_hardcode_libdir_separator_CXX
 
-# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the
-# resulting binary.
-hardcode_direct=$hardcode_direct_CXX
 
-# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
-# resulting binary.
-hardcode_minus_L=$hardcode_minus_L_CXX
 
-# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into
-# the resulting binary.
-hardcode_shlibpath_var=$hardcode_shlibpath_var_CXX
 
-# Set to yes if building a shared library automatically hardcodes DIR into the library
-# and all subsequent libraries and executables linked against it.
-hardcode_automatic=$hardcode_automatic_CXX
 
-# Variables whose values should be saved in libtool wrapper scripts and
-# restored at relink time.
-variables_saved_for_relink="$variables_saved_for_relink"
 
-# Whether libtool must link a program against all its dependency libraries.
-link_all_deplibs=$link_all_deplibs_CXX
 
-# Compile-time system search path for libraries
-sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
 
-# Run-time system search path for libraries
-sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
 
-# Fix the shell variable \$srcfile for the compiler.
-fix_srcfile_path=$lt_fix_srcfile_path
 
-# Set to yes if exported symbols are required.
-always_export_symbols=$always_export_symbols_CXX
 
-# The commands to list exported symbols.
-export_symbols_cmds=$lt_export_symbols_cmds_CXX
 
-# The commands to extract the exported symbol list from a shared archive.
-extract_expsyms_cmds=$lt_extract_expsyms_cmds
 
-# Symbols that should not be listed in the preloaded symbols.
-exclude_expsyms=$lt_exclude_expsyms_CXX
 
-# Symbols that must always be exported.
-include_expsyms=$lt_include_expsyms_CXX
 
-# ### END LIBTOOL TAG CONFIG: $tagname
 
-__EOF__
 
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking dynamic linker characteristics" >&5
+$as_echo_n "checking dynamic linker characteristics... " >&6; }
 
-else
-  # If there is no Makefile yet, we rely on a make rule to execute
-  # `config.status --recheck' to rerun these tests and create the
-  # libtool script then.
-  ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'`
-  if test -f "$ltmain_in"; then
-    test -f Makefile && make "$ltmain"
+if test "$GCC" = yes; then
+  case $host_os in
+    darwin*) lt_awk_arg="/^libraries:/,/LR/" ;;
+    *) lt_awk_arg="/^libraries:/" ;;
+  esac
+  lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e "s,=/,/,g"`
+  if $ECHO "$lt_search_path_spec" | $GREP ';' >/dev/null ; then
+    # if the path contains ";" then we assume it to be the separator
+    # otherwise default to the standard path separator (i.e. ":") - it is
+    # assumed that no part of a normal pathname contains ";" but that should
+    # okay in the real world where ";" in dirpaths is itself problematic.
+    lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED -e 's/;/ /g'`
+  else
+    lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED  -e "s/$PATH_SEPARATOR/ /g"`
   fi
+  # Ok, now we have the path, separated by spaces, we can step through it
+  # and add multilib dir if necessary.
+  lt_tmp_lt_search_path_spec=
+  lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null`
+  for lt_sys_path in $lt_search_path_spec; do
+    if test -d "$lt_sys_path/$lt_multi_os_dir"; then
+      lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir"
+    else
+      test -d "$lt_sys_path" && \
+	lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path"
+    fi
+  done
+  lt_search_path_spec=`$ECHO $lt_tmp_lt_search_path_spec | awk '
+BEGIN {RS=" "; FS="/|\n";} {
+  lt_foo="";
+  lt_count=0;
+  for (lt_i = NF; lt_i > 0; lt_i--) {
+    if ($lt_i != "" && $lt_i != ".") {
+      if ($lt_i == "..") {
+        lt_count++;
+      } else {
+        if (lt_count == 0) {
+          lt_foo="/" $lt_i lt_foo;
+        } else {
+          lt_count--;
+        }
+      }
+    }
+  }
+  if (lt_foo != "") { lt_freq[lt_foo]++; }
+  if (lt_freq[lt_foo] == 1) { print lt_foo; }
+}'`
+  sys_lib_search_path_spec=`$ECHO $lt_search_path_spec`
+else
+  sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
 fi
+library_names_spec=
+libname_spec='lib$name'
+soname_spec=
+shrext_cmds=".so"
+postinstall_cmds=
+postuninstall_cmds=
+finish_cmds=
+finish_eval=
+shlibpath_var=
+shlibpath_overrides_runpath=unknown
+version_type=none
+dynamic_linker="$host_os ld.so"
+sys_lib_dlsearch_path_spec="/lib /usr/lib"
+need_lib_prefix=unknown
+hardcode_into_libs=no
 
+# when you set need_version to no, make sure it does not cause -set_version
+# flags to be left without arguments
+need_version=unknown
 
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-CC=$lt_save_CC
-LDCXX=$LD
-LD=$lt_save_LD
-GCC=$lt_save_GCC
-with_gnu_ldcxx=$with_gnu_ld
-with_gnu_ld=$lt_save_with_gnu_ld
-lt_cv_path_LDCXX=$lt_cv_path_LD
-lt_cv_path_LD=$lt_save_path_LD
-lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld
-lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld
-
-	else
-	  tagname=""
-	fi
-	;;
+case $host_os in
+aix3*)
+  version_type=linux
+  library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
+  shlibpath_var=LIBPATH
 
-      F77)
-	if test -n "$F77" && test "X$F77" != "Xno"; then
+  # AIX 3 has no versioning support, so we append a major version to the name.
+  soname_spec='${libname}${release}${shared_ext}$major'
+  ;;
 
-ac_ext=f
-ac_compile='$F77 -c $FFLAGS conftest.$ac_ext >&5'
-ac_link='$F77 -o conftest$ac_exeext $FFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_f77_compiler_gnu
-
-
-archive_cmds_need_lc_F77=no
-allow_undefined_flag_F77=
-always_export_symbols_F77=no
-archive_expsym_cmds_F77=
-export_dynamic_flag_spec_F77=
-hardcode_direct_F77=no
-hardcode_libdir_flag_spec_F77=
-hardcode_libdir_flag_spec_ld_F77=
-hardcode_libdir_separator_F77=
-hardcode_minus_L_F77=no
-hardcode_automatic_F77=no
-module_cmds_F77=
-module_expsym_cmds_F77=
-link_all_deplibs_F77=unknown
-old_archive_cmds_F77=$old_archive_cmds
-no_undefined_flag_F77=
-whole_archive_flag_spec_F77=
-enable_shared_with_static_runtimes_F77=no
+aix[4-9]*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  hardcode_into_libs=yes
+  if test "$host_cpu" = ia64; then
+    # AIX 5 supports IA64
+    library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
+    shlibpath_var=LD_LIBRARY_PATH
+  else
+    # With GCC up to 2.95.x, collect2 would create an import file
+    # for dependence libraries.  The import file would start with
+    # the line `#! .'.  This would cause the generated library to
+    # depend on `.', always an invalid library.  This was fixed in
+    # development snapshots of GCC prior to 3.0.
+    case $host_os in
+      aix4 | aix4.[01] | aix4.[01].*)
+      if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
+	   echo ' yes '
+	   echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then
+	:
+      else
+	can_build_shared=no
+      fi
+      ;;
+    esac
+    # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
+    # soname into executable. Probably we can add versioning support to
+    # collect2, so additional links can be useful in future.
+    if test "$aix_use_runtimelinking" = yes; then
+      # If using run time linking (on AIX 4.2 or later) use lib<name>.so
+      # instead of lib<name>.a to let people know that these are not
+      # typical AIX shared libraries.
+      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    else
+      # We preserve .a as extension for shared libraries through AIX4.2
+      # and later when we are not doing run time linking.
+      library_names_spec='${libname}${release}.a $libname.a'
+      soname_spec='${libname}${release}${shared_ext}$major'
+    fi
+    shlibpath_var=LIBPATH
+  fi
+  ;;
 
-# Source file extension for f77 test sources.
-ac_ext=f
+amigaos*)
+  case $host_cpu in
+  powerpc)
+    # Since July 2007 AmigaOS4 officially supports .so libraries.
+    # When compiling the executable, add -use-dynld -Lsobjs: to the compileline.
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    ;;
+  m68k)
+    library_names_spec='$libname.ixlibrary $libname.a'
+    # Create ${libname}_ixlibrary.a entries in /sys/libs.
+    finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$ECHO "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
+    ;;
+  esac
+  ;;
 
-# Object file extension for compiled f77 test sources.
-objext=o
-objext_F77=$objext
+beos*)
+  library_names_spec='${libname}${shared_ext}'
+  dynamic_linker="$host_os ld.so"
+  shlibpath_var=LIBRARY_PATH
+  ;;
 
-# Code to be used in simple compile tests
-lt_simple_compile_test_code="\
-      subroutine t
-      return
-      end
-"
+bsdi[45]*)
+  version_type=linux
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
+  sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
+  # the default ld.so.conf also contains /usr/contrib/lib and
+  # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
+  # libtool to hard-code these into programs
+  ;;
 
-# Code to be used in simple link tests
-lt_simple_link_test_code="\
-      program t
-      end
-"
+cygwin* | mingw* | pw32* | cegcc*)
+  version_type=windows
+  shrext_cmds=".dll"
+  need_version=no
+  need_lib_prefix=no
 
-# ltmain only uses $CC for tagged configurations so make sure $CC is set.
-
-# If no C compiler was specified, use CC.
-LTCC=${LTCC-"$CC"}
-
-# If no C compiler flags were specified, use CFLAGS.
-LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
-
-# Allow CC to be a program name with arguments.
-compiler=$CC
-
-
-# save warnings/boilerplate of simple test code
-ac_outfile=conftest.$ac_objext
-echo "$lt_simple_compile_test_code" >conftest.$ac_ext
-eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
-_lt_compiler_boilerplate=`cat conftest.err`
-$rm conftest*
-
-ac_outfile=conftest.$ac_objext
-echo "$lt_simple_link_test_code" >conftest.$ac_ext
-eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
-_lt_linker_boilerplate=`cat conftest.err`
-$rm -r conftest*
-
-
-# Allow CC to be a program name with arguments.
-lt_save_CC="$CC"
-CC=${F77-"f77"}
-compiler=$CC
-compiler_F77=$CC
-for cc_temp in $compiler""; do
-  case $cc_temp in
-    compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
-    distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
-    \-*) ;;
-    *) break;;
-  esac
-done
-cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
-
-
-{ $as_echo "$as_me:$LINENO: checking if libtool supports shared libraries" >&5
-$as_echo_n "checking if libtool supports shared libraries... " >&6; }
-{ $as_echo "$as_me:$LINENO: result: $can_build_shared" >&5
-$as_echo "$can_build_shared" >&6; }
-
-{ $as_echo "$as_me:$LINENO: checking whether to build shared libraries" >&5
-$as_echo_n "checking whether to build shared libraries... " >&6; }
-test "$can_build_shared" = "no" && enable_shared=no
-
-# On AIX, shared libraries and static libraries use the same namespace, and
-# are all built from PIC.
-case $host_os in
-aix3*)
-  test "$enable_shared" = yes && enable_static=no
-  if test -n "$RANLIB"; then
-    archive_cmds="$archive_cmds~\$RANLIB \$lib"
-    postinstall_cmds='$RANLIB $lib'
-  fi
-  ;;
-aix[4-9]*)
-  if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
-    test "$enable_shared" = yes && enable_static=no
-  fi
-  ;;
-esac
-{ $as_echo "$as_me:$LINENO: result: $enable_shared" >&5
-$as_echo "$enable_shared" >&6; }
-
-{ $as_echo "$as_me:$LINENO: checking whether to build static libraries" >&5
-$as_echo_n "checking whether to build static libraries... " >&6; }
-# Make sure either enable_shared or enable_static is yes.
-test "$enable_shared" = yes || enable_static=yes
-{ $as_echo "$as_me:$LINENO: result: $enable_static" >&5
-$as_echo "$enable_static" >&6; }
-
-GCC_F77="$G77"
-LD_F77="$LD"
-
-lt_prog_compiler_wl_F77=
-lt_prog_compiler_pic_F77=
-lt_prog_compiler_static_F77=
-
-{ $as_echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5
-$as_echo_n "checking for $compiler option to produce PIC... " >&6; }
-
-  if test "$GCC" = yes; then
-    lt_prog_compiler_wl_F77='-Wl,'
-    lt_prog_compiler_static_F77='-static'
+  case $GCC,$host_os in
+  yes,cygwin* | yes,mingw* | yes,pw32* | yes,cegcc*)
+    library_names_spec='$libname.dll.a'
+    # DLL is installed to $(libdir)/../bin by postinstall_cmds
+    postinstall_cmds='base_file=`basename \${file}`~
+      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
+      dldir=$destdir/`dirname \$dlpath`~
+      test -d \$dldir || mkdir -p \$dldir~
+      $install_prog $dir/$dlname \$dldir/$dlname~
+      chmod a+x \$dldir/$dlname~
+      if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then
+        eval '\''$striplib \$dldir/$dlname'\'' || exit \$?;
+      fi'
+    postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
+      dlpath=$dir/\$dldll~
+       $RM \$dlpath'
+    shlibpath_overrides_runpath=yes
 
     case $host_os in
-      aix*)
-      # All AIX code is PIC.
-      if test "$host_cpu" = ia64; then
-	# AIX 5 now supports IA64 processor
-	lt_prog_compiler_static_F77='-Bstatic'
-      fi
-      ;;
-
-    amigaos*)
-      # FIXME: we need at least 68020 code to build shared libraries, but
-      # adding the `-m68020' flag to GCC prevents building anything better,
-      # like `-m68040'.
-      lt_prog_compiler_pic_F77='-m68020 -resident32 -malways-restore-a4'
+    cygwin*)
+      # Cygwin DLLs use 'cyg' prefix rather than 'lib'
+      soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+      sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib"
       ;;
-
-    beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
-      # PIC is the default for these OSes.
+    mingw* | cegcc*)
+      # MinGW DLLs use traditional 'lib' prefix
+      soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+      sys_lib_search_path_spec=`$CC -print-search-dirs | $GREP "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
+      if $ECHO "$sys_lib_search_path_spec" | $GREP ';[c-zC-Z]:/' >/dev/null; then
+        # It is most probably a Windows format PATH printed by
+        # mingw gcc, but we are running on Cygwin. Gcc prints its search
+        # path with ; separators, and with drive letters. We can handle the
+        # drive letters (cygwin fileutils understands them), so leave them,
+        # especially as we might pass files found there to a mingw objdump,
+        # which wouldn't understand a cygwinified path. Ahh.
+        sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
+      else
+        sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED  -e "s/$PATH_SEPARATOR/ /g"`
+      fi
       ;;
-
-    mingw* | cygwin* | pw32* | os2*)
-      # This hack is so that the source file can tell whether it is being
-      # built for inclusion in a dll (and should export symbols for example).
-      # Although the cygwin gcc ignores -fPIC, still need this for old-style
-      # (--disable-auto-import) libraries
-      lt_prog_compiler_pic_F77='-DDLL_EXPORT'
+    pw32*)
+      # pw32 DLLs use 'pw' prefix rather than 'lib'
+      library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
       ;;
+    esac
+    ;;
 
-    darwin* | rhapsody*)
-      # PIC is the default on this platform
-      # Common symbols not allowed in MH_DYLIB files
-      lt_prog_compiler_pic_F77='-fno-common'
-      ;;
+  *)
+    library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib'
+    ;;
+  esac
+  dynamic_linker='Win32 ld.exe'
+  # FIXME: first we should search . and the directory the executable is in
+  shlibpath_var=PATH
+  ;;
 
-    interix[3-9]*)
-      # Interix 3.x gcc -fpic/-fPIC options generate broken code.
-      # Instead, we relocate shared libraries at runtime.
-      ;;
+darwin* | rhapsody*)
+  dynamic_linker="$host_os dyld"
+  version_type=darwin
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext'
+  soname_spec='${libname}${release}${major}$shared_ext'
+  shlibpath_overrides_runpath=yes
+  shlibpath_var=DYLD_LIBRARY_PATH
+  shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
 
-    msdosdjgpp*)
-      # Just because we use GCC doesn't mean we suddenly get shared libraries
-      # on systems that don't support them.
-      lt_prog_compiler_can_build_shared_F77=no
-      enable_shared=no
-      ;;
+  sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib"
+  sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
+  ;;
 
-    sysv4*MP*)
-      if test -d /usr/nec; then
-	lt_prog_compiler_pic_F77=-Kconform_pic
-      fi
-      ;;
+dgux*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  ;;
 
-    hpux*)
-      # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
-      # not for PA HP-UX.
-      case $host_cpu in
-      hppa*64*|ia64*)
-	# +Z the default
-	;;
-      *)
-	lt_prog_compiler_pic_F77='-fPIC'
-	;;
-      esac
-      ;;
+freebsd1*)
+  dynamic_linker=no
+  ;;
 
-    *)
-      lt_prog_compiler_pic_F77='-fPIC'
-      ;;
-    esac
+freebsd* | dragonfly*)
+  # DragonFly does not have aout.  When/if they implement a new
+  # versioning mechanism, adjust this.
+  if test -x /usr/bin/objformat; then
+    objformat=`/usr/bin/objformat`
   else
-    # PORTME Check for flag to pass linker flags through the system compiler.
     case $host_os in
-    aix*)
-      lt_prog_compiler_wl_F77='-Wl,'
-      if test "$host_cpu" = ia64; then
-	# AIX 5 now supports IA64 processor
-	lt_prog_compiler_static_F77='-Bstatic'
-      else
-	lt_prog_compiler_static_F77='-bnso -bI:/lib/syscalls.exp'
-      fi
-      ;;
-      darwin*)
-        # PIC is the default on this platform
-        # Common symbols not allowed in MH_DYLIB files
-       case $cc_basename in
-         xlc*)
-         lt_prog_compiler_pic_F77='-qnocommon'
-         lt_prog_compiler_wl_F77='-Wl,'
-         ;;
-       esac
-       ;;
-
-    mingw* | cygwin* | pw32* | os2*)
-      # This hack is so that the source file can tell whether it is being
-      # built for inclusion in a dll (and should export symbols for example).
-      lt_prog_compiler_pic_F77='-DDLL_EXPORT'
-      ;;
-
-    hpux9* | hpux10* | hpux11*)
-      lt_prog_compiler_wl_F77='-Wl,'
-      # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
-      # not for PA HP-UX.
-      case $host_cpu in
-      hppa*64*|ia64*)
-	# +Z the default
-	;;
-      *)
-	lt_prog_compiler_pic_F77='+Z'
-	;;
-      esac
-      # Is there a better lt_prog_compiler_static that works with the bundled CC?
-      lt_prog_compiler_static_F77='${wl}-a ${wl}archive'
+    freebsd[123]*) objformat=aout ;;
+    *) objformat=elf ;;
+    esac
+  fi
+  version_type=freebsd-$objformat
+  case $version_type in
+    freebsd-elf*)
+      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
+      need_version=no
+      need_lib_prefix=no
       ;;
-
-    irix5* | irix6* | nonstopux*)
-      lt_prog_compiler_wl_F77='-Wl,'
-      # PIC (with -KPIC) is the default.
-      lt_prog_compiler_static_F77='-non_shared'
+    freebsd-*)
+      library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
+      need_version=yes
       ;;
+  esac
+  shlibpath_var=LD_LIBRARY_PATH
+  case $host_os in
+  freebsd2*)
+    shlibpath_overrides_runpath=yes
+    ;;
+  freebsd3.[01]* | freebsdelf3.[01]*)
+    shlibpath_overrides_runpath=yes
+    hardcode_into_libs=yes
+    ;;
+  freebsd3.[2-9]* | freebsdelf3.[2-9]* | \
+  freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1)
+    shlibpath_overrides_runpath=no
+    hardcode_into_libs=yes
+    ;;
+  *) # from 4.6 on, and DragonFly
+    shlibpath_overrides_runpath=yes
+    hardcode_into_libs=yes
+    ;;
+  esac
+  ;;
 
-    newsos6)
-      lt_prog_compiler_pic_F77='-KPIC'
-      lt_prog_compiler_static_F77='-Bstatic'
-      ;;
+gnu*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  hardcode_into_libs=yes
+  ;;
 
-    linux* | k*bsd*-gnu)
-      case $cc_basename in
-      icc* | ecc*)
-	lt_prog_compiler_wl_F77='-Wl,'
-	lt_prog_compiler_pic_F77='-KPIC'
-	lt_prog_compiler_static_F77='-static'
-        ;;
-      pgcc* | pgf77* | pgf90* | pgf95*)
-        # Portland Group compilers (*not* the Pentium gcc compiler,
-	# which looks to be a dead project)
-	lt_prog_compiler_wl_F77='-Wl,'
-	lt_prog_compiler_pic_F77='-fpic'
-	lt_prog_compiler_static_F77='-Bstatic'
-        ;;
-      ccc*)
-        lt_prog_compiler_wl_F77='-Wl,'
-        # All Alpha code is PIC.
-        lt_prog_compiler_static_F77='-non_shared'
-        ;;
-      *)
-        case `$CC -V 2>&1 | sed 5q` in
-	*Sun\ C*)
-	  # Sun C 5.9
-	  lt_prog_compiler_pic_F77='-KPIC'
-	  lt_prog_compiler_static_F77='-Bstatic'
-	  lt_prog_compiler_wl_F77='-Wl,'
-	  ;;
-	*Sun\ F*)
-	  # Sun Fortran 8.3 passes all unrecognized flags to the linker
-	  lt_prog_compiler_pic_F77='-KPIC'
-	  lt_prog_compiler_static_F77='-Bstatic'
-	  lt_prog_compiler_wl_F77=''
-	  ;;
-	esac
-	;;
-      esac
-      ;;
-
-    osf3* | osf4* | osf5*)
-      lt_prog_compiler_wl_F77='-Wl,'
-      # All OSF/1 code is PIC.
-      lt_prog_compiler_static_F77='-non_shared'
-      ;;
-
-    rdos*)
-      lt_prog_compiler_static_F77='-non_shared'
-      ;;
-
-    solaris*)
-      lt_prog_compiler_pic_F77='-KPIC'
-      lt_prog_compiler_static_F77='-Bstatic'
-      case $cc_basename in
-      f77* | f90* | f95*)
-	lt_prog_compiler_wl_F77='-Qoption ld ';;
-      *)
-	lt_prog_compiler_wl_F77='-Wl,';;
-      esac
-      ;;
-
-    sunos4*)
-      lt_prog_compiler_wl_F77='-Qoption ld '
-      lt_prog_compiler_pic_F77='-PIC'
-      lt_prog_compiler_static_F77='-Bstatic'
-      ;;
-
-    sysv4 | sysv4.2uw2* | sysv4.3*)
-      lt_prog_compiler_wl_F77='-Wl,'
-      lt_prog_compiler_pic_F77='-KPIC'
-      lt_prog_compiler_static_F77='-Bstatic'
-      ;;
-
-    sysv4*MP*)
-      if test -d /usr/nec ;then
-	lt_prog_compiler_pic_F77='-Kconform_pic'
-	lt_prog_compiler_static_F77='-Bstatic'
-      fi
-      ;;
-
-    sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
-      lt_prog_compiler_wl_F77='-Wl,'
-      lt_prog_compiler_pic_F77='-KPIC'
-      lt_prog_compiler_static_F77='-Bstatic'
-      ;;
-
-    unicos*)
-      lt_prog_compiler_wl_F77='-Wl,'
-      lt_prog_compiler_can_build_shared_F77=no
-      ;;
+hpux9* | hpux10* | hpux11*)
+  # Give a soname corresponding to the major version so that dld.sl refuses to
+  # link against other versions.
+  version_type=sunos
+  need_lib_prefix=no
+  need_version=no
+  case $host_cpu in
+  ia64*)
+    shrext_cmds='.so'
+    hardcode_into_libs=yes
+    dynamic_linker="$host_os dld.so"
+    shlibpath_var=LD_LIBRARY_PATH
+    shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    soname_spec='${libname}${release}${shared_ext}$major'
+    if test "X$HPUX_IA64_MODE" = X32; then
+      sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
+    else
+      sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
+    fi
+    sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+    ;;
+  hppa*64*)
+    shrext_cmds='.sl'
+    hardcode_into_libs=yes
+    dynamic_linker="$host_os dld.sl"
+    shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
+    shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    soname_spec='${libname}${release}${shared_ext}$major'
+    sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
+    sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+    ;;
+  *)
+    shrext_cmds='.sl'
+    dynamic_linker="$host_os dld.sl"
+    shlibpath_var=SHLIB_PATH
+    shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    soname_spec='${libname}${release}${shared_ext}$major'
+    ;;
+  esac
+  # HP-UX runs *really* slowly unless shared libraries are mode 555.
+  postinstall_cmds='chmod 555 $lib'
+  ;;
 
-    uts4*)
-      lt_prog_compiler_pic_F77='-pic'
-      lt_prog_compiler_static_F77='-Bstatic'
-      ;;
+interix[3-9]*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  ;;
 
+irix5* | irix6* | nonstopux*)
+  case $host_os in
+    nonstopux*) version_type=nonstopux ;;
     *)
-      lt_prog_compiler_can_build_shared_F77=no
-      ;;
+	if test "$lt_cv_prog_gnu_ld" = yes; then
+		version_type=linux
+	else
+		version_type=irix
+	fi ;;
+  esac
+  need_lib_prefix=no
+  need_version=no
+  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
+  case $host_os in
+  irix5* | nonstopux*)
+    libsuff= shlibsuff=
+    ;;
+  *)
+    case $LD in # libtool.m4 will add one of these switches to LD
+    *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
+      libsuff= shlibsuff= libmagic=32-bit;;
+    *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
+      libsuff=32 shlibsuff=N32 libmagic=N32;;
+    *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
+      libsuff=64 shlibsuff=64 libmagic=64-bit;;
+    *) libsuff= shlibsuff= libmagic=never-match;;
     esac
-  fi
+    ;;
+  esac
+  shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
+  shlibpath_overrides_runpath=no
+  sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
+  sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
+  hardcode_into_libs=yes
+  ;;
 
-{ $as_echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_F77" >&5
-$as_echo "$lt_prog_compiler_pic_F77" >&6; }
+# No shared lib support for Linux oldld, aout, or coff.
+linux*oldld* | linux*aout* | linux*coff*)
+  dynamic_linker=no
+  ;;
 
-#
-# Check to make sure the PIC flag actually works.
-#
-if test -n "$lt_prog_compiler_pic_F77"; then
+# This must be Linux ELF.
+linux* | k*bsd*-gnu)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  # Some binutils ld are patched to set DT_RUNPATH
+  save_LDFLAGS=$LDFLAGS
+  save_libdir=$libdir
+  eval "libdir=/foo; wl=\"$lt_prog_compiler_wl\"; \
+       LDFLAGS=\"\$LDFLAGS $hardcode_libdir_flag_spec\""
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
 
-{ $as_echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic_F77 works" >&5
-$as_echo_n "checking if $compiler PIC flag $lt_prog_compiler_pic_F77 works... " >&6; }
-if test "${lt_cv_prog_compiler_pic_works_F77+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
-  lt_cv_prog_compiler_pic_works_F77=no
-  ac_outfile=conftest.$ac_objext
-   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
-   lt_compiler_flag="$lt_prog_compiler_pic_F77"
-   # Insert the option either (1) after the last *FLAGS variable, or
-   # (2) before a word containing "conftest.", or (3) at the end.
-   # Note that $ac_compile itself does not contain backslashes and begins
-   # with a dollar sign (not a hyphen), so the echo should work correctly.
-   # The option is referenced via a variable to avoid confusing sed.
-   lt_compile=`echo "$ac_compile" | $SED \
-   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-   -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:16292: $lt_compile\"" >&5)
-   (eval "$lt_compile" 2>conftest.err)
-   ac_status=$?
-   cat conftest.err >&5
-   echo "$as_me:16296: \$? = $ac_status" >&5
-   if (exit $ac_status) && test -s "$ac_outfile"; then
-     # The compiler can only warn and ignore the option if not recognized
-     # So say no if there are warnings other than the usual output.
-     $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
-     $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
-     if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
-       lt_cv_prog_compiler_pic_works_F77=yes
-     fi
-   fi
-   $rm conftest*
+int
+main ()
+{
 
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  if  ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null; then :
+  shlibpath_overrides_runpath=yes
 fi
-{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_pic_works_F77" >&5
-$as_echo "$lt_cv_prog_compiler_pic_works_F77" >&6; }
-
-if test x"$lt_cv_prog_compiler_pic_works_F77" = xyes; then
-    case $lt_prog_compiler_pic_F77 in
-     "" | " "*) ;;
-     *) lt_prog_compiler_pic_F77=" $lt_prog_compiler_pic_F77" ;;
-     esac
-else
-    lt_prog_compiler_pic_F77=
-     lt_prog_compiler_can_build_shared_F77=no
 fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+  LDFLAGS=$save_LDFLAGS
+  libdir=$save_libdir
 
-fi
-case $host_os in
-  # For platforms which do not support PIC, -DPIC is meaningless:
-  *djgpp*)
-    lt_prog_compiler_pic_F77=
-    ;;
-  *)
-    lt_prog_compiler_pic_F77="$lt_prog_compiler_pic_F77"
-    ;;
-esac
+  # This implies no fast_install, which is unacceptable.
+  # Some rework will be needed to allow for fast_install
+  # before this can be enabled.
+  hardcode_into_libs=yes
 
-#
-# Check to make sure the static flag actually works.
-#
-wl=$lt_prog_compiler_wl_F77 eval lt_tmp_static_flag=\"$lt_prog_compiler_static_F77\"
-{ $as_echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5
-$as_echo_n "checking if $compiler static flag $lt_tmp_static_flag works... " >&6; }
-if test "${lt_cv_prog_compiler_static_works_F77+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
-  lt_cv_prog_compiler_static_works_F77=no
-   save_LDFLAGS="$LDFLAGS"
-   LDFLAGS="$LDFLAGS $lt_tmp_static_flag"
-   echo "$lt_simple_link_test_code" > conftest.$ac_ext
-   if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
-     # The linker can only warn and ignore the option if not recognized
-     # So say no if there are warnings
-     if test -s conftest.err; then
-       # Append any errors to the config.log.
-       cat conftest.err 1>&5
-       $echo "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp
-       $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
-       if diff conftest.exp conftest.er2 >/dev/null; then
-         lt_cv_prog_compiler_static_works_F77=yes
-       fi
-     else
-       lt_cv_prog_compiler_static_works_F77=yes
-     fi
-   fi
-   $rm -r conftest*
-   LDFLAGS="$save_LDFLAGS"
+  # Append ld.so.conf contents to the search path
+  if test -f /etc/ld.so.conf; then
+    lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[	 ]*hwcap[	 ]/d;s/[:,	]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
+    sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
+  fi
 
-fi
-{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_static_works_F77" >&5
-$as_echo "$lt_cv_prog_compiler_static_works_F77" >&6; }
+  # We used to test for /lib/ld.so.1 and disable shared libraries on
+  # powerpc, because MkLinux only supported shared libraries with the
+  # GNU dynamic linker.  Since this was broken with cross compilers,
+  # most powerpc-linux boxes support dynamic linking these days and
+  # people can always --disable-shared, the test was removed, and we
+  # assume the GNU/Linux dynamic linker is in use.
+  dynamic_linker='GNU/Linux ld.so'
+  ;;
 
-if test x"$lt_cv_prog_compiler_static_works_F77" = xyes; then
-    :
-else
-    lt_prog_compiler_static_F77=
-fi
+netbsdelf*-gnu)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  dynamic_linker='NetBSD ld.elf_so'
+  ;;
 
+netbsd*)
+  version_type=sunos
+  need_lib_prefix=no
+  need_version=no
+  if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+    finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+    dynamic_linker='NetBSD (a.out) ld.so'
+  else
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+    soname_spec='${libname}${release}${shared_ext}$major'
+    dynamic_linker='NetBSD ld.elf_so'
+  fi
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  hardcode_into_libs=yes
+  ;;
 
-{ $as_echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5
-$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; }
-if test "${lt_cv_prog_compiler_c_o_F77+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
-  lt_cv_prog_compiler_c_o_F77=no
-   $rm -r conftest 2>/dev/null
-   mkdir conftest
-   cd conftest
-   mkdir out
-   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
-
-   lt_compiler_flag="-o out/conftest2.$ac_objext"
-   # Insert the option either (1) after the last *FLAGS variable, or
-   # (2) before a word containing "conftest.", or (3) at the end.
-   # Note that $ac_compile itself does not contain backslashes and begins
-   # with a dollar sign (not a hyphen), so the echo should work correctly.
-   lt_compile=`echo "$ac_compile" | $SED \
-   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-   -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:16396: $lt_compile\"" >&5)
-   (eval "$lt_compile" 2>out/conftest.err)
-   ac_status=$?
-   cat out/conftest.err >&5
-   echo "$as_me:16400: \$? = $ac_status" >&5
-   if (exit $ac_status) && test -s out/conftest2.$ac_objext
-   then
-     # The compiler can only warn and ignore the option if not recognized
-     # So say no if there are warnings
-     $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
-     $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
-     if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
-       lt_cv_prog_compiler_c_o_F77=yes
-     fi
-   fi
-   chmod u+w . 2>&5
-   $rm conftest*
-   # SGI C++ compiler will create directory out/ii_files/ for
-   # template instantiation
-   test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files
-   $rm out/* && rmdir out
-   cd ..
-   rmdir conftest
-   $rm conftest*
-
-fi
-{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o_F77" >&5
-$as_echo "$lt_cv_prog_compiler_c_o_F77" >&6; }
-
-
-hard_links="nottested"
-if test "$lt_cv_prog_compiler_c_o_F77" = no && test "$need_locks" != no; then
-  # do not overwrite the value of need_locks provided by the user
-  { $as_echo "$as_me:$LINENO: checking if we can lock with hard links" >&5
-$as_echo_n "checking if we can lock with hard links... " >&6; }
-  hard_links=yes
-  $rm conftest*
-  ln conftest.a conftest.b 2>/dev/null && hard_links=no
-  touch conftest.a
-  ln conftest.a conftest.b 2>&5 || hard_links=no
-  ln conftest.a conftest.b 2>/dev/null && hard_links=no
-  { $as_echo "$as_me:$LINENO: result: $hard_links" >&5
-$as_echo "$hard_links" >&6; }
-  if test "$hard_links" = no; then
-    { $as_echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5
-$as_echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;}
-    need_locks=warn
-  fi
-else
-  need_locks=no
-fi
-
-{ $as_echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5
-$as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; }
+newsos6)
+  version_type=linux
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  ;;
 
-  runpath_var=
-  allow_undefined_flag_F77=
-  enable_shared_with_static_runtimes_F77=no
-  archive_cmds_F77=
-  archive_expsym_cmds_F77=
-  old_archive_From_new_cmds_F77=
-  old_archive_from_expsyms_cmds_F77=
-  export_dynamic_flag_spec_F77=
-  whole_archive_flag_spec_F77=
-  thread_safe_flag_spec_F77=
-  hardcode_libdir_flag_spec_F77=
-  hardcode_libdir_flag_spec_ld_F77=
-  hardcode_libdir_separator_F77=
-  hardcode_direct_F77=no
-  hardcode_minus_L_F77=no
-  hardcode_shlibpath_var_F77=unsupported
-  link_all_deplibs_F77=unknown
-  hardcode_automatic_F77=no
-  module_cmds_F77=
-  module_expsym_cmds_F77=
-  always_export_symbols_F77=no
-  export_symbols_cmds_F77='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
-  # include_expsyms should be a list of space-separated symbols to be *always*
-  # included in the symbol list
-  include_expsyms_F77=
-  # exclude_expsyms can be an extended regexp of symbols to exclude
-  # it will be wrapped by ` (' and `)$', so one must not match beginning or
-  # end of line.  Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
-  # as well as any symbol that contains `d'.
-  exclude_expsyms_F77='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'
-  # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
-  # platforms (ab)use it in PIC code, but their linkers get confused if
-  # the symbol is explicitly referenced.  Since portable code cannot
-  # rely on this symbol name, it's probably fine to never include it in
-  # preloaded symbol tables.
-  # Exclude shared library initialization/finalization symbols.
-  extract_expsyms_cmds=
-  # Just being paranoid about ensuring that cc_basename is set.
-  for cc_temp in $compiler""; do
-  case $cc_temp in
-    compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
-    distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
-    \-*) ;;
-    *) break;;
-  esac
-done
-cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
+*nto* | *qnx*)
+  version_type=qnx
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  dynamic_linker='ldqnx.so'
+  ;;
 
+openbsd*)
+  version_type=sunos
+  sys_lib_dlsearch_path_spec="/usr/lib"
+  need_lib_prefix=no
+  # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
   case $host_os in
-  cygwin* | mingw* | pw32*)
-    # FIXME: the MSVC++ port hasn't been tested in a loooong time
-    # When not using gcc, we currently assume that we are using
-    # Microsoft Visual C++.
-    if test "$GCC" != yes; then
-      with_gnu_ld=no
-    fi
-    ;;
-  interix*)
-    # we just hope/assume this is gcc and not c89 (= MSVC++)
-    with_gnu_ld=yes
-    ;;
-  openbsd*)
-    with_gnu_ld=no
-    ;;
+    openbsd3.3 | openbsd3.3.*)	need_version=yes ;;
+    *)				need_version=no  ;;
   esac
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+    case $host_os in
+      openbsd2.[89] | openbsd2.[89].*)
+	shlibpath_overrides_runpath=no
+	;;
+      *)
+	shlibpath_overrides_runpath=yes
+	;;
+      esac
+  else
+    shlibpath_overrides_runpath=yes
+  fi
+  ;;
 
-  ld_shlibs_F77=yes
-  if test "$with_gnu_ld" = yes; then
-    # If archive_cmds runs LD, not CC, wlarc should be empty
-    wlarc='${wl}'
+os2*)
+  libname_spec='$name'
+  shrext_cmds=".dll"
+  need_lib_prefix=no
+  library_names_spec='$libname${shared_ext} $libname.a'
+  dynamic_linker='OS/2 ld.exe'
+  shlibpath_var=LIBPATH
+  ;;
 
-    # Set some defaults for GNU ld with shared library support. These
-    # are reset later if shared libraries are not supported. Putting them
-    # here allows them to be overridden if necessary.
-    runpath_var=LD_RUN_PATH
-    hardcode_libdir_flag_spec_F77='${wl}--rpath ${wl}$libdir'
-    export_dynamic_flag_spec_F77='${wl}--export-dynamic'
-    # ancient GNU ld didn't support --whole-archive et. al.
-    if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then
-	whole_archive_flag_spec_F77="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
-      else
-  	whole_archive_flag_spec_F77=
-    fi
-    supports_anon_versioning=no
-    case `$LD -v 2>/dev/null` in
-      *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11
-      *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
-      *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
-      *\ 2.11.*) ;; # other 2.11 versions
-      *) supports_anon_versioning=yes ;;
-    esac
+osf3* | osf4* | osf5*)
+  version_type=osf
+  need_lib_prefix=no
+  need_version=no
+  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  shlibpath_var=LD_LIBRARY_PATH
+  sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
+  sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
+  ;;
 
-    # See if GNU ld supports shared libraries.
-    case $host_os in
-    aix[3-9]*)
-      # On AIX/PPC, the GNU linker is very broken
-      if test "$host_cpu" != ia64; then
-	ld_shlibs_F77=no
-	cat <<EOF 1>&2
+rdos*)
+  dynamic_linker=no
+  ;;
 
-*** Warning: the GNU linker, at least up to release 2.9.1, is reported
-*** to be unable to reliably create shared libraries on AIX.
-*** Therefore, libtool is disabling shared libraries support.  If you
-*** really care for shared libraries, you may want to modify your PATH
-*** so that a non-GNU linker is found, and then restart.
+solaris*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  hardcode_into_libs=yes
+  # ldd complains unless libraries are executable
+  postinstall_cmds='chmod +x $lib'
+  ;;
 
-EOF
-      fi
-      ;;
+sunos4*)
+  version_type=sunos
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+  finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  if test "$with_gnu_ld" = yes; then
+    need_lib_prefix=no
+  fi
+  need_version=yes
+  ;;
 
-    amigaos*)
-      archive_cmds_F77='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
-      hardcode_libdir_flag_spec_F77='-L$libdir'
-      hardcode_minus_L_F77=yes
-
-      # Samuel A. Falvo II <kc5tja@dolphin.openprojects.net> reports
-      # that the semantics of dynamic libraries on AmigaOS, at least up
-      # to version 4, is to share data among multiple programs linked
-      # with the same dynamic library.  Since this doesn't match the
-      # behavior of shared libraries on other platforms, we can't use
-      # them.
-      ld_shlibs_F77=no
+sysv4 | sysv4.3*)
+  version_type=linux
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  case $host_vendor in
+    sni)
+      shlibpath_overrides_runpath=no
+      need_lib_prefix=no
+      runpath_var=LD_RUN_PATH
       ;;
-
-    beos*)
-      if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-	allow_undefined_flag_F77=unsupported
-	# Joseph Beckenbach <jrb3@best.com> says some releases of gcc
-	# support --undefined.  This deserves some investigation.  FIXME
-	archive_cmds_F77='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-      else
-	ld_shlibs_F77=no
-      fi
+    siemens)
+      need_lib_prefix=no
       ;;
-
-    cygwin* | mingw* | pw32*)
-      # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, F77) is actually meaningless,
-      # as there is no search path for DLLs.
-      hardcode_libdir_flag_spec_F77='-L$libdir'
-      allow_undefined_flag_F77=unsupported
-      always_export_symbols_F77=no
-      enable_shared_with_static_runtimes_F77=yes
-      export_symbols_cmds_F77='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/'\'' -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols'
-
-      if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
-        archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
-	# If the export-symbols file already is a .def file (1st line
-	# is EXPORTS), use it as is; otherwise, prepend...
-	archive_expsym_cmds_F77='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
-	  cp $export_symbols $output_objdir/$soname.def;
-	else
-	  echo EXPORTS > $output_objdir/$soname.def;
-	  cat $export_symbols >> $output_objdir/$soname.def;
-	fi~
-	$CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
-      else
-	ld_shlibs_F77=no
-      fi
+    motorola)
+      need_lib_prefix=no
+      need_version=no
+      shlibpath_overrides_runpath=no
+      sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
       ;;
+  esac
+  ;;
 
-    interix[3-9]*)
-      hardcode_direct_F77=no
-      hardcode_shlibpath_var_F77=no
-      hardcode_libdir_flag_spec_F77='${wl}-rpath,$libdir'
-      export_dynamic_flag_spec_F77='${wl}-E'
-      # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
-      # Instead, shared libraries are loaded at an image base (0x10000000 by
-      # default) and relocated if they conflict, which is a slow very memory
-      # consuming and fragmenting process.  To avoid this, we pick a random,
-      # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
-      # time.  Moving up from 0x10000000 also allows more sbrk(2) space.
-      archive_cmds_F77='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
-      archive_expsym_cmds_F77='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
-      ;;
+sysv4*MP*)
+  if test -d /usr/nec ;then
+    version_type=linux
+    library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
+    soname_spec='$libname${shared_ext}.$major'
+    shlibpath_var=LD_LIBRARY_PATH
+  fi
+  ;;
 
-    gnu* | linux* | k*bsd*-gnu)
-      if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-	tmp_addflag=
-	case $cc_basename,$host_cpu in
-	pgcc*)				# Portland Group C compiler
-	  whole_archive_flag_spec_F77='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
-	  tmp_addflag=' $pic_flag'
-	  ;;
-	pgf77* | pgf90* | pgf95*)	# Portland Group f77 and f90 compilers
-	  whole_archive_flag_spec_F77='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
-	  tmp_addflag=' $pic_flag -Mnomain' ;;
-	ecc*,ia64* | icc*,ia64*)		# Intel C compiler on ia64
-	  tmp_addflag=' -i_dynamic' ;;
-	efc*,ia64* | ifort*,ia64*)	# Intel Fortran compiler on ia64
-	  tmp_addflag=' -i_dynamic -nofor_main' ;;
-	ifc* | ifort*)			# Intel Fortran compiler
-	  tmp_addflag=' -nofor_main' ;;
-	esac
-	case `$CC -V 2>&1 | sed 5q` in
-	*Sun\ C*)			# Sun C 5.9
-	  whole_archive_flag_spec_F77='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
-	  tmp_sharedflag='-G' ;;
-	*Sun\ F*)			# Sun Fortran 8.3
-	  tmp_sharedflag='-G' ;;
-	*)
-	  tmp_sharedflag='-shared' ;;
-	esac
-	archive_cmds_F77='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
+  version_type=freebsd-elf
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  hardcode_into_libs=yes
+  if test "$with_gnu_ld" = yes; then
+    sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
+  else
+    sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
+    case $host_os in
+      sco3.2v5*)
+        sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
+	;;
+    esac
+  fi
+  sys_lib_dlsearch_path_spec='/usr/lib'
+  ;;
 
-	if test $supports_anon_versioning = yes; then
-	  archive_expsym_cmds_F77='$echo "{ global:" > $output_objdir/$libname.ver~
-  cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
-  $echo "local: *; };" >> $output_objdir/$libname.ver~
-	  $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
-	fi
-	link_all_deplibs_F77=no
-      else
-	ld_shlibs_F77=no
-      fi
-      ;;
+tpf*)
+  # TPF is a cross-target only.  Preferred cross-host = GNU/Linux.
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  ;;
 
-    netbsd*)
-      if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-	archive_cmds_F77='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
-	wlarc=
-      else
-	archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-	archive_expsym_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-      fi
-      ;;
+uts4*)
+  version_type=linux
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  ;;
 
-    solaris*)
-      if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then
-	ld_shlibs_F77=no
-	cat <<EOF 1>&2
+*)
+  dynamic_linker=no
+  ;;
+esac
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $dynamic_linker" >&5
+$as_echo "$dynamic_linker" >&6; }
+test "$dynamic_linker" = no && can_build_shared=no
 
-*** Warning: The releases 2.8.* of the GNU linker cannot reliably
-*** create shared libraries on Solaris systems.  Therefore, libtool
-*** is disabling shared libraries support.  We urge you to upgrade GNU
-*** binutils to release 2.9.1 or newer.  Another option is to modify
-*** your PATH or compiler configuration so that the native linker is
-*** used, and then restart.
+variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
+if test "$GCC" = yes; then
+  variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
+fi
 
-EOF
-      elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-	archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-	archive_expsym_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-      else
-	ld_shlibs_F77=no
-      fi
-      ;;
+if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then
+  sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec"
+fi
+if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then
+  sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec"
+fi
 
-    sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
-      case `$LD -v 2>&1` in
-        *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*)
-	ld_shlibs_F77=no
-	cat <<_LT_EOF 1>&2
 
-*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not
-*** reliably create shared libraries on SCO systems.  Therefore, libtool
-*** is disabling shared libraries support.  We urge you to upgrade GNU
-*** binutils to release 2.16.91.0.3 or newer.  Another option is to modify
-*** your PATH or compiler configuration so that the native linker is
-*** used, and then restart.
 
-_LT_EOF
-	;;
-	*)
-	  if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-	    hardcode_libdir_flag_spec_F77='`test -z "$SCOABSPATH" && echo ${wl}-rpath,$libdir`'
-	    archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib'
-	    archive_expsym_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname,-retain-symbols-file,$export_symbols -o $lib'
-	  else
-	    ld_shlibs_F77=no
-	  fi
-	;;
-      esac
-      ;;
 
-    sunos4*)
-      archive_cmds_F77='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-      wlarc=
-      hardcode_direct_F77=yes
-      hardcode_shlibpath_var_F77=no
-      ;;
 
-    *)
-      if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-	archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-	archive_expsym_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-      else
-	ld_shlibs_F77=no
-      fi
-      ;;
-    esac
 
-    if test "$ld_shlibs_F77" = no; then
-      runpath_var=
-      hardcode_libdir_flag_spec_F77=
-      export_dynamic_flag_spec_F77=
-      whole_archive_flag_spec_F77=
-    fi
-  else
-    # PORTME fill in a description of your system's linker (not GNU ld)
-    case $host_os in
-    aix3*)
-      allow_undefined_flag_F77=unsupported
-      always_export_symbols_F77=yes
-      archive_expsym_cmds_F77='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
-      # Note: this linker hardcodes the directories in LIBPATH if there
-      # are no directories specified by -L.
-      hardcode_minus_L_F77=yes
-      if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then
-	# Neither direct hardcoding nor static linking is supported with a
-	# broken collect2.
-	hardcode_direct_F77=unsupported
-      fi
-      ;;
 
-    aix[4-9]*)
-      if test "$host_cpu" = ia64; then
-	# On IA64, the linker does run time linking by default, so we don't
-	# have to do anything special.
-	aix_use_runtimelinking=no
-	exp_sym_flag='-Bexport'
-	no_entry_flag=""
-      else
-	# If we're using GNU nm, then we don't want the "-C" option.
-	# -C means demangle to AIX nm, but means don't demangle with GNU nm
-	if $NM -V 2>&1 | grep 'GNU' > /dev/null; then
-	  export_symbols_cmds_F77='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols'
-	else
-	  export_symbols_cmds_F77='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols'
-	fi
-	aix_use_runtimelinking=no
 
-	# Test if we are trying to use run time linking or normal
-	# AIX style linking. If -brtl is somewhere in LDFLAGS, we
-	# need to do runtime linking.
-	case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*)
-	  for ld_flag in $LDFLAGS; do
-  	  if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
-  	    aix_use_runtimelinking=yes
-  	    break
-  	  fi
-	  done
-	  ;;
-	esac
 
-	exp_sym_flag='-bexport'
-	no_entry_flag='-bnoentry'
-      fi
 
-      # When large executables or shared objects are built, AIX ld can
-      # have problems creating the table of contents.  If linking a library
-      # or program results in "error TOC overflow" add -mminimal-toc to
-      # CXXFLAGS/CFLAGS for g++/gcc.  In the cases where that is not
-      # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
 
-      archive_cmds_F77=''
-      hardcode_direct_F77=yes
-      hardcode_libdir_separator_F77=':'
-      link_all_deplibs_F77=yes
 
-      if test "$GCC" = yes; then
-	case $host_os in aix4.[012]|aix4.[012].*)
-	# We only want to do this on AIX 4.2 and lower, the check
-	# below for broken collect2 doesn't work under 4.3+
-	  collect2name=`${CC} -print-prog-name=collect2`
-	  if test -f "$collect2name" && \
-  	   strings "$collect2name" | grep resolve_lib_name >/dev/null
-	  then
-  	  # We have reworked collect2
-  	  :
-	  else
-  	  # We have old collect2
-  	  hardcode_direct_F77=unsupported
-  	  # It fails to find uninstalled libraries when the uninstalled
-  	  # path is not listed in the libpath.  Setting hardcode_minus_L
-  	  # to unsupported forces relinking
-  	  hardcode_minus_L_F77=yes
-  	  hardcode_libdir_flag_spec_F77='-L$libdir'
-  	  hardcode_libdir_separator_F77=
-	  fi
-	  ;;
-	esac
-	shared_flag='-shared'
-	if test "$aix_use_runtimelinking" = yes; then
-	  shared_flag="$shared_flag "'${wl}-G'
-	fi
-      else
-	# not using gcc
-	if test "$host_cpu" = ia64; then
-  	# VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
-  	# chokes on -Wl,-G. The following line is correct:
-	  shared_flag='-G'
-	else
-	  if test "$aix_use_runtimelinking" = yes; then
-	    shared_flag='${wl}-G'
-	  else
-	    shared_flag='${wl}-bM:SRE'
-	  fi
-	fi
-      fi
 
-      # It seems that -bexpall does not export symbols beginning with
-      # underscore (_), so it is better to generate a list of symbols to export.
-      always_export_symbols_F77=yes
-      if test "$aix_use_runtimelinking" = yes; then
-	# Warning - without using the other runtime loading flags (-brtl),
-	# -berok will link without error, but may produce a broken library.
-	allow_undefined_flag_F77='-berok'
-       # Determine the default libpath from the value encoded in an empty executable.
-       cat >conftest.$ac_ext <<_ACEOF
-      program main
 
-      end
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_link") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_f77_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest$ac_exeext && {
-	 test "$cross_compiling" = yes ||
-	 $as_test_x conftest$ac_exeext
-       }; then
 
-lt_aix_libpath_sed='
-    /Import File Strings/,/^$/ {
-	/^0/ {
-	    s/^0  *\(.*\)$/\1/
-	    p
-	}
-    }'
-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-# Check for a 64-bit object if we didn't find anything.
-if test -z "$aix_libpath"; then
-  aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-fi
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
 
 
-fi
 
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-      conftest$ac_exeext conftest.$ac_ext
-if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
 
-       hardcode_libdir_flag_spec_F77='${wl}-blibpath:$libdir:'"$aix_libpath"
-	archive_expsym_cmds_F77="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
-       else
-	if test "$host_cpu" = ia64; then
-	  hardcode_libdir_flag_spec_F77='${wl}-R $libdir:/usr/lib:/lib'
-	  allow_undefined_flag_F77="-z nodefs"
-	  archive_expsym_cmds_F77="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
-	else
-	 # Determine the default libpath from the value encoded in an empty executable.
-	 cat >conftest.$ac_ext <<_ACEOF
-      program main
 
-      end
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_link") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_f77_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest$ac_exeext && {
-	 test "$cross_compiling" = yes ||
-	 $as_test_x conftest$ac_exeext
-       }; then
 
-lt_aix_libpath_sed='
-    /Import File Strings/,/^$/ {
-	/^0/ {
-	    s/^0  *\(.*\)$/\1/
-	    p
-	}
-    }'
-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-# Check for a 64-bit object if we didn't find anything.
-if test -z "$aix_libpath"; then
-  aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-fi
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
 
 
-fi
 
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-      conftest$ac_exeext conftest.$ac_ext
-if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
 
-	 hardcode_libdir_flag_spec_F77='${wl}-blibpath:$libdir:'"$aix_libpath"
-	  # Warning - without using the other run time loading flags,
-	  # -berok will link without error, but may produce a broken library.
-	  no_undefined_flag_F77=' ${wl}-bernotok'
-	  allow_undefined_flag_F77=' ${wl}-berok'
-	  # Exported symbols can be pulled into shared objects from archives
-	  whole_archive_flag_spec_F77='$convenience'
-	  archive_cmds_need_lc_F77=yes
-	  # This is similar to how AIX traditionally builds its shared libraries.
-	  archive_expsym_cmds_F77="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
-	fi
-      fi
-      ;;
 
-    amigaos*)
-      archive_cmds_F77='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
-      hardcode_libdir_flag_spec_F77='-L$libdir'
-      hardcode_minus_L_F77=yes
-      # see comment about different semantics on the GNU ld section
-      ld_shlibs_F77=no
-      ;;
 
-    bsdi[45]*)
-      export_dynamic_flag_spec_F77=-rdynamic
-      ;;
 
-    cygwin* | mingw* | pw32*)
-      # When not using gcc, we currently assume that we are using
-      # Microsoft Visual C++.
-      # hardcode_libdir_flag_spec is actually meaningless, as there is
-      # no search path for DLLs.
-      hardcode_libdir_flag_spec_F77=' '
-      allow_undefined_flag_F77=unsupported
-      # Tell ltmain to make .lib files, not .a files.
-      libext=lib
-      # Tell ltmain to make .dll files, not .so files.
-      shrext_cmds=".dll"
-      # FIXME: Setting linknames here is a bad hack.
-      archive_cmds_F77='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames='
-      # The linker will automatically build a .lib file if we build a DLL.
-      old_archive_From_new_cmds_F77='true'
-      # FIXME: Should let the user specify the lib program.
-      old_archive_cmds_F77='lib -OUT:$oldlib$oldobjs$old_deplibs'
-      fix_srcfile_path_F77='`cygpath -w "$srcfile"`'
-      enable_shared_with_static_runtimes_F77=yes
-      ;;
 
-    darwin* | rhapsody*)
-      case $host_os in
-        rhapsody* | darwin1.[012])
-         allow_undefined_flag_F77='${wl}-undefined ${wl}suppress'
-         ;;
-       *) # Darwin 1.3 on
-         if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then
-           allow_undefined_flag_F77='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
-         else
-           case ${MACOSX_DEPLOYMENT_TARGET} in
-             10.[012])
-               allow_undefined_flag_F77='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
-               ;;
-             10.*)
-               allow_undefined_flag_F77='${wl}-undefined ${wl}dynamic_lookup'
-               ;;
-           esac
-         fi
-         ;;
-      esac
-      archive_cmds_need_lc_F77=no
-      hardcode_direct_F77=no
-      hardcode_automatic_F77=yes
-      hardcode_shlibpath_var_F77=unsupported
-      whole_archive_flag_spec_F77=''
-      link_all_deplibs_F77=yes
-    if test "$GCC" = yes ; then
-    	output_verbose_link_cmd='echo'
-        archive_cmds_F77="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}"
-        module_cmds_F77="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}"
-        archive_expsym_cmds_F77="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}"
-        module_expsym_cmds_F77="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}"
-    else
-      case $cc_basename in
-        xlc*)
-         output_verbose_link_cmd='echo'
-         archive_cmds_F77='$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $xlcverstring'
-         module_cmds_F77='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
-          # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
-         archive_expsym_cmds_F77='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $xlcverstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-          module_expsym_cmds_F77='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag  -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-          ;;
-       *)
-         ld_shlibs_F77=no
-          ;;
-      esac
-    fi
-      ;;
 
-    dgux*)
-      archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-      hardcode_libdir_flag_spec_F77='-L$libdir'
-      hardcode_shlibpath_var_F77=no
-      ;;
 
-    freebsd1*)
-      ld_shlibs_F77=no
-      ;;
 
-    # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
-    # support.  Future versions do this automatically, but an explicit c++rt0.o
-    # does not break anything, and helps significantly (at the cost of a little
-    # extra space).
-    freebsd2.2*)
-      archive_cmds_F77='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
-      hardcode_libdir_flag_spec_F77='-R$libdir'
-      hardcode_direct_F77=yes
-      hardcode_shlibpath_var_F77=no
-      ;;
 
-    # Unfortunately, older versions of FreeBSD 2 do not have this feature.
-    freebsd2*)
-      archive_cmds_F77='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-      hardcode_direct_F77=yes
-      hardcode_minus_L_F77=yes
-      hardcode_shlibpath_var_F77=no
-      ;;
 
-    # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
-    freebsd* | dragonfly*)
-      archive_cmds_F77='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
-      hardcode_libdir_flag_spec_F77='-R$libdir'
-      hardcode_direct_F77=yes
-      hardcode_shlibpath_var_F77=no
-      ;;
 
-    hpux9*)
-      if test "$GCC" = yes; then
-	archive_cmds_F77='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
-      else
-	archive_cmds_F77='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
-      fi
-      hardcode_libdir_flag_spec_F77='${wl}+b ${wl}$libdir'
-      hardcode_libdir_separator_F77=:
-      hardcode_direct_F77=yes
 
-      # hardcode_minus_L: Not really in the search PATH,
-      # but as the default location of the library.
-      hardcode_minus_L_F77=yes
-      export_dynamic_flag_spec_F77='${wl}-E'
-      ;;
 
-    hpux10*)
-      if test "$GCC" = yes -a "$with_gnu_ld" = no; then
-	archive_cmds_F77='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
-      else
-	archive_cmds_F77='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
-      fi
-      if test "$with_gnu_ld" = no; then
-	hardcode_libdir_flag_spec_F77='${wl}+b ${wl}$libdir'
-	hardcode_libdir_separator_F77=:
 
-	hardcode_direct_F77=yes
-	export_dynamic_flag_spec_F77='${wl}-E'
 
-	# hardcode_minus_L: Not really in the search PATH,
-	# but as the default location of the library.
-	hardcode_minus_L_F77=yes
-      fi
-      ;;
 
-    hpux11*)
-      if test "$GCC" = yes -a "$with_gnu_ld" = no; then
-	case $host_cpu in
-	hppa*64*)
-	  archive_cmds_F77='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-	  ;;
-	ia64*)
-	  archive_cmds_F77='$CC -shared ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
-	  ;;
-	*)
-	  archive_cmds_F77='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
-	  ;;
-	esac
-      else
-	case $host_cpu in
-	hppa*64*)
-	  archive_cmds_F77='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-	  ;;
-	ia64*)
-	  archive_cmds_F77='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
-	  ;;
-	*)
-	  archive_cmds_F77='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
-	  ;;
-	esac
-      fi
-      if test "$with_gnu_ld" = no; then
-	hardcode_libdir_flag_spec_F77='${wl}+b ${wl}$libdir'
-	hardcode_libdir_separator_F77=:
 
-	case $host_cpu in
-	hppa*64*|ia64*)
-	  hardcode_libdir_flag_spec_ld_F77='+b $libdir'
-	  hardcode_direct_F77=no
-	  hardcode_shlibpath_var_F77=no
-	  ;;
-	*)
-	  hardcode_direct_F77=yes
-	  export_dynamic_flag_spec_F77='${wl}-E'
 
-	  # hardcode_minus_L: Not really in the search PATH,
-	  # but as the default location of the library.
-	  hardcode_minus_L_F77=yes
-	  ;;
-	esac
-      fi
-      ;;
 
-    irix5* | irix6* | nonstopux*)
-      if test "$GCC" = yes; then
-	archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-      else
-	archive_cmds_F77='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-	hardcode_libdir_flag_spec_ld_F77='-rpath $libdir'
-      fi
-      hardcode_libdir_flag_spec_F77='${wl}-rpath ${wl}$libdir'
-      hardcode_libdir_separator_F77=:
-      link_all_deplibs_F77=yes
-      ;;
 
-    netbsd*)
-      if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-	archive_cmds_F77='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'  # a.out
-      else
-	archive_cmds_F77='$LD -shared -o $lib $libobjs $deplibs $linker_flags'      # ELF
-      fi
-      hardcode_libdir_flag_spec_F77='-R$libdir'
-      hardcode_direct_F77=yes
-      hardcode_shlibpath_var_F77=no
-      ;;
 
-    newsos6)
-      archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-      hardcode_direct_F77=yes
-      hardcode_libdir_flag_spec_F77='${wl}-rpath ${wl}$libdir'
-      hardcode_libdir_separator_F77=:
-      hardcode_shlibpath_var_F77=no
-      ;;
 
-    openbsd*)
-      if test -f /usr/libexec/ld.so; then
-	hardcode_direct_F77=yes
-	hardcode_shlibpath_var_F77=no
-	if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-	  archive_cmds_F77='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
-	  archive_expsym_cmds_F77='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
-	  hardcode_libdir_flag_spec_F77='${wl}-rpath,$libdir'
-	  export_dynamic_flag_spec_F77='${wl}-E'
-	else
-	  case $host_os in
-	   openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*)
-	     archive_cmds_F77='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-	     hardcode_libdir_flag_spec_F77='-R$libdir'
-	     ;;
-	   *)
-	     archive_cmds_F77='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
-	     hardcode_libdir_flag_spec_F77='${wl}-rpath,$libdir'
-	     ;;
-	  esac
-        fi
-      else
-	ld_shlibs_F77=no
-      fi
-      ;;
 
-    os2*)
-      hardcode_libdir_flag_spec_F77='-L$libdir'
-      hardcode_minus_L_F77=yes
-      allow_undefined_flag_F77=unsupported
-      archive_cmds_F77='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
-      old_archive_From_new_cmds_F77='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
-      ;;
 
-    osf3*)
-      if test "$GCC" = yes; then
-	allow_undefined_flag_F77=' ${wl}-expect_unresolved ${wl}\*'
-	archive_cmds_F77='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-      else
-	allow_undefined_flag_F77=' -expect_unresolved \*'
-	archive_cmds_F77='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-      fi
-      hardcode_libdir_flag_spec_F77='${wl}-rpath ${wl}$libdir'
-      hardcode_libdir_separator_F77=:
-      ;;
 
-    osf4* | osf5*)	# as osf3* with the addition of -msym flag
-      if test "$GCC" = yes; then
-	allow_undefined_flag_F77=' ${wl}-expect_unresolved ${wl}\*'
-	archive_cmds_F77='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-	hardcode_libdir_flag_spec_F77='${wl}-rpath ${wl}$libdir'
-      else
-	allow_undefined_flag_F77=' -expect_unresolved \*'
-	archive_cmds_F77='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-	archive_expsym_cmds_F77='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~
-	$LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~$rm $lib.exp'
 
-	# Both c and cxx compiler support -rpath directly
-	hardcode_libdir_flag_spec_F77='-rpath $libdir'
-      fi
-      hardcode_libdir_separator_F77=:
-      ;;
 
-    solaris*)
-      no_undefined_flag_F77=' -z text'
-      if test "$GCC" = yes; then
-	wlarc='${wl}'
-	archive_cmds_F77='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-	archive_expsym_cmds_F77='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-	  $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp'
-      else
-	wlarc=''
-	archive_cmds_F77='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
-	archive_expsym_cmds_F77='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-  	$LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
-      fi
-      hardcode_libdir_flag_spec_F77='-R$libdir'
-      hardcode_shlibpath_var_F77=no
-      case $host_os in
-      solaris2.[0-5] | solaris2.[0-5].*) ;;
-      *)
-	# The compiler driver will combine and reorder linker options,
-	# but understands `-z linker_flag'.  GCC discards it without `$wl',
-	# but is careful enough not to reorder.
- 	# Supported since Solaris 2.6 (maybe 2.5.1?)
-	if test "$GCC" = yes; then
-	  whole_archive_flag_spec_F77='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
-	else
-	  whole_archive_flag_spec_F77='-z allextract$convenience -z defaultextract'
-	fi
-	;;
-      esac
-      link_all_deplibs_F77=yes
-      ;;
 
-    sunos4*)
-      if test "x$host_vendor" = xsequent; then
-	# Use $CC to link under sequent, because it throws in some extra .o
-	# files that make .init and .fini sections work.
-	archive_cmds_F77='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
-      else
-	archive_cmds_F77='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
-      fi
-      hardcode_libdir_flag_spec_F77='-L$libdir'
-      hardcode_direct_F77=yes
-      hardcode_minus_L_F77=yes
-      hardcode_shlibpath_var_F77=no
-      ;;
 
-    sysv4)
-      case $host_vendor in
-	sni)
-	  archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-	  hardcode_direct_F77=yes # is this really true???
-	;;
-	siemens)
-	  ## LD is ld it makes a PLAMLIB
-	  ## CC just makes a GrossModule.
-	  archive_cmds_F77='$LD -G -o $lib $libobjs $deplibs $linker_flags'
-	  reload_cmds_F77='$CC -r -o $output$reload_objs'
-	  hardcode_direct_F77=no
-        ;;
-	motorola)
-	  archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-	  hardcode_direct_F77=no #Motorola manual says yes, but my tests say they lie
-	;;
-      esac
-      runpath_var='LD_RUN_PATH'
-      hardcode_shlibpath_var_F77=no
-      ;;
 
-    sysv4.3*)
-      archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-      hardcode_shlibpath_var_F77=no
-      export_dynamic_flag_spec_F77='-Bexport'
-      ;;
 
-    sysv4*MP*)
-      if test -d /usr/nec; then
-	archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-	hardcode_shlibpath_var_F77=no
-	runpath_var=LD_RUN_PATH
-	hardcode_runpath_var=yes
-	ld_shlibs_F77=yes
-      fi
-      ;;
 
-    sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*)
-      no_undefined_flag_F77='${wl}-z,text'
-      archive_cmds_need_lc_F77=no
-      hardcode_shlibpath_var_F77=no
-      runpath_var='LD_RUN_PATH'
 
-      if test "$GCC" = yes; then
-	archive_cmds_F77='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-	archive_expsym_cmds_F77='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-      else
-	archive_cmds_F77='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-	archive_expsym_cmds_F77='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-      fi
-      ;;
 
-    sysv5* | sco3.2v5* | sco5v6*)
-      # Note: We can NOT use -z defs as we might desire, because we do not
-      # link with -lc, and that would cause any symbols used from libc to
-      # always be unresolved, which means just about no library would
-      # ever link correctly.  If we're not using GNU ld we use -z text
-      # though, which does catch some bad symbols but isn't as heavy-handed
-      # as -z defs.
-      no_undefined_flag_F77='${wl}-z,text'
-      allow_undefined_flag_F77='${wl}-z,nodefs'
-      archive_cmds_need_lc_F77=no
-      hardcode_shlibpath_var_F77=no
-      hardcode_libdir_flag_spec_F77='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`'
-      hardcode_libdir_separator_F77=':'
-      link_all_deplibs_F77=yes
-      export_dynamic_flag_spec_F77='${wl}-Bexport'
-      runpath_var='LD_RUN_PATH'
 
-      if test "$GCC" = yes; then
-	archive_cmds_F77='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
-	archive_expsym_cmds_F77='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
-      else
-	archive_cmds_F77='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
-	archive_expsym_cmds_F77='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
-      fi
-      ;;
 
-    uts4*)
-      archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-      hardcode_libdir_flag_spec_F77='-L$libdir'
-      hardcode_shlibpath_var_F77=no
-      ;;
 
-    *)
-      ld_shlibs_F77=no
-      ;;
-    esac
-  fi
 
-{ $as_echo "$as_me:$LINENO: result: $ld_shlibs_F77" >&5
-$as_echo "$ld_shlibs_F77" >&6; }
-test "$ld_shlibs_F77" = no && can_build_shared=no
 
-#
-# Do we need to explicitly link libc?
-#
-case "x$archive_cmds_need_lc_F77" in
-x|xyes)
-  # Assume -lc should be added
-  archive_cmds_need_lc_F77=yes
 
-  if test "$enable_shared" = yes && test "$GCC" = yes; then
-    case $archive_cmds_F77 in
-    *'~'*)
-      # FIXME: we may have to deal with multi-command sequences.
-      ;;
-    '$CC '*)
-      # Test whether the compiler implicitly links with -lc since on some
-      # systems, -lgcc has to come before -lc. If gcc already passes -lc
-      # to ld, don't add -lc before -lgcc.
-      { $as_echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5
-$as_echo_n "checking whether -lc should be explicitly linked in... " >&6; }
-      $rm conftest*
-      echo "$lt_simple_compile_test_code" > conftest.$ac_ext
 
-      if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } 2>conftest.err; then
-        soname=conftest
-        lib=conftest
-        libobjs=conftest.$ac_objext
-        deplibs=
-        wl=$lt_prog_compiler_wl_F77
-	pic_flag=$lt_prog_compiler_pic_F77
-        compiler_flags=-v
-        linker_flags=-v
-        verstring=
-        output_objdir=.
-        libname=conftest
-        lt_save_allow_undefined_flag=$allow_undefined_flag_F77
-        allow_undefined_flag_F77=
-        if { (eval echo "$as_me:$LINENO: \"$archive_cmds_F77 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1\"") >&5
-  (eval $archive_cmds_F77 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) 2>&5
-  ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }
-        then
-	  archive_cmds_need_lc_F77=no
-        else
-	  archive_cmds_need_lc_F77=yes
-        fi
-        allow_undefined_flag_F77=$lt_save_allow_undefined_flag
-      else
-        cat conftest.err 1>&5
-      fi
-      $rm conftest*
-      { $as_echo "$as_me:$LINENO: result: $archive_cmds_need_lc_F77" >&5
-$as_echo "$archive_cmds_need_lc_F77" >&6; }
-      ;;
-    esac
-  fi
-  ;;
-esac
 
-{ $as_echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5
-$as_echo_n "checking dynamic linker characteristics... " >&6; }
-library_names_spec=
-libname_spec='lib$name'
-soname_spec=
-shrext_cmds=".so"
-postinstall_cmds=
-postuninstall_cmds=
-finish_cmds=
-finish_eval=
-shlibpath_var=
-shlibpath_overrides_runpath=unknown
-version_type=none
-dynamic_linker="$host_os ld.so"
-sys_lib_dlsearch_path_spec="/lib /usr/lib"
 
-need_lib_prefix=unknown
-hardcode_into_libs=no
 
-# when you set need_version to no, make sure it does not cause -set_version
-# flags to be left without arguments
-need_version=unknown
 
-case $host_os in
-aix3*)
-  version_type=linux
-  library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
-  shlibpath_var=LIBPATH
 
-  # AIX 3 has no versioning support, so we append a major version to the name.
-  soname_spec='${libname}${release}${shared_ext}$major'
-  ;;
 
-aix[4-9]*)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  hardcode_into_libs=yes
-  if test "$host_cpu" = ia64; then
-    # AIX 5 supports IA64
-    library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
-    shlibpath_var=LD_LIBRARY_PATH
-  else
-    # With GCC up to 2.95.x, collect2 would create an import file
-    # for dependence libraries.  The import file would start with
-    # the line `#! .'.  This would cause the generated library to
-    # depend on `.', always an invalid library.  This was fixed in
-    # development snapshots of GCC prior to 3.0.
-    case $host_os in
-      aix4 | aix4.[01] | aix4.[01].*)
-      if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
-	   echo ' yes '
-	   echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then
-	:
-      else
-	can_build_shared=no
-      fi
-      ;;
-    esac
-    # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
-    # soname into executable. Probably we can add versioning support to
-    # collect2, so additional links can be useful in future.
-    if test "$aix_use_runtimelinking" = yes; then
-      # If using run time linking (on AIX 4.2 or later) use lib<name>.so
-      # instead of lib<name>.a to let people know that these are not
-      # typical AIX shared libraries.
-      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-    else
-      # We preserve .a as extension for shared libraries through AIX4.2
-      # and later when we are not doing run time linking.
-      library_names_spec='${libname}${release}.a $libname.a'
-      soname_spec='${libname}${release}${shared_ext}$major'
-    fi
-    shlibpath_var=LIBPATH
-  fi
-  ;;
 
-amigaos*)
-  library_names_spec='$libname.ixlibrary $libname.a'
-  # Create ${libname}_ixlibrary.a entries in /sys/libs.
-  finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
-  ;;
 
-beos*)
-  library_names_spec='${libname}${shared_ext}'
-  dynamic_linker="$host_os ld.so"
-  shlibpath_var=LIBRARY_PATH
-  ;;
 
-bsdi[45]*)
-  version_type=linux
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
-  shlibpath_var=LD_LIBRARY_PATH
-  sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
-  sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
-  # the default ld.so.conf also contains /usr/contrib/lib and
-  # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
-  # libtool to hard-code these into programs
-  ;;
 
-cygwin* | mingw* | pw32*)
-  version_type=windows
-  shrext_cmds=".dll"
-  need_version=no
-  need_lib_prefix=no
 
-  case $GCC,$host_os in
-  yes,cygwin* | yes,mingw* | yes,pw32*)
-    library_names_spec='$libname.dll.a'
-    # DLL is installed to $(libdir)/../bin by postinstall_cmds
-    postinstall_cmds='base_file=`basename \${file}`~
-      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~
-      dldir=$destdir/`dirname \$dlpath`~
-      test -d \$dldir || mkdir -p \$dldir~
-      $install_prog $dir/$dlname \$dldir/$dlname~
-      chmod a+x \$dldir/$dlname'
-    postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
-      dlpath=$dir/\$dldll~
-       $rm \$dlpath'
-    shlibpath_overrides_runpath=yes
 
-    case $host_os in
-    cygwin*)
-      # Cygwin DLLs use 'cyg' prefix rather than 'lib'
-      soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
-      sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib"
-      ;;
-    mingw*)
-      # MinGW DLLs use traditional 'lib' prefix
-      soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
-      sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
-      if echo "$sys_lib_search_path_spec" | grep ';[c-zC-Z]:/' >/dev/null; then
-        # It is most probably a Windows format PATH printed by
-        # mingw gcc, but we are running on Cygwin. Gcc prints its search
-        # path with ; separators, and with drive letters. We can handle the
-        # drive letters (cygwin fileutils understands them), so leave them,
-        # especially as we might pass files found there to a mingw objdump,
-        # which wouldn't understand a cygwinified path. Ahh.
-        sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
-      else
-        sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED  -e "s/$PATH_SEPARATOR/ /g"`
-      fi
-      ;;
-    pw32*)
-      # pw32 DLLs use 'pw' prefix rather than 'lib'
-      library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
-      ;;
-    esac
-    ;;
 
-  *)
-    library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib'
-    ;;
-  esac
-  dynamic_linker='Win32 ld.exe'
-  # FIXME: first we should search . and the directory the executable is in
-  shlibpath_var=PATH
-  ;;
 
-darwin* | rhapsody*)
-  dynamic_linker="$host_os dyld"
-  version_type=darwin
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext'
-  soname_spec='${libname}${release}${major}$shared_ext'
-  shlibpath_overrides_runpath=yes
-  shlibpath_var=DYLD_LIBRARY_PATH
-  shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
 
-  sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
-  ;;
 
-dgux*)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  ;;
 
-freebsd1*)
-  dynamic_linker=no
-  ;;
 
-freebsd* | dragonfly*)
-  # DragonFly does not have aout.  When/if they implement a new
-  # versioning mechanism, adjust this.
-  if test -x /usr/bin/objformat; then
-    objformat=`/usr/bin/objformat`
+
+
+
+
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to hardcode library paths into programs" >&5
+$as_echo_n "checking how to hardcode library paths into programs... " >&6; }
+hardcode_action=
+if test -n "$hardcode_libdir_flag_spec" ||
+   test -n "$runpath_var" ||
+   test "X$hardcode_automatic" = "Xyes" ; then
+
+  # We can hardcode non-existent directories.
+  if test "$hardcode_direct" != no &&
+     # If the only mechanism to avoid hardcoding is shlibpath_var, we
+     # have to relink, otherwise we might link with an installed library
+     # when we should be linking with a yet-to-be-installed one
+     ## test "$_LT_TAGVAR(hardcode_shlibpath_var, )" != no &&
+     test "$hardcode_minus_L" != no; then
+    # Linking always hardcodes the temporary library directory.
+    hardcode_action=relink
   else
-    case $host_os in
-    freebsd[123]*) objformat=aout ;;
-    *) objformat=elf ;;
-    esac
+    # We can link without hardcoding, and we can hardcode nonexisting dirs.
+    hardcode_action=immediate
   fi
-  version_type=freebsd-$objformat
-  case $version_type in
-    freebsd-elf*)
-      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
-      need_version=no
-      need_lib_prefix=no
-      ;;
-    freebsd-*)
-      library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
-      need_version=yes
-      ;;
-  esac
-  shlibpath_var=LD_LIBRARY_PATH
+else
+  # We cannot hardcode anything, or else we can only hardcode existing
+  # directories.
+  hardcode_action=unsupported
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $hardcode_action" >&5
+$as_echo "$hardcode_action" >&6; }
+
+if test "$hardcode_action" = relink ||
+   test "$inherit_rpath" = yes; then
+  # Fast installation is not supported
+  enable_fast_install=no
+elif test "$shlibpath_overrides_runpath" = yes ||
+     test "$enable_shared" = no; then
+  # Fast installation is not necessary
+  enable_fast_install=needless
+fi
+
+
+
+
+
+
+  if test "x$enable_dlopen" != xyes; then
+  enable_dlopen=unknown
+  enable_dlopen_self=unknown
+  enable_dlopen_self_static=unknown
+else
+  lt_cv_dlopen=no
+  lt_cv_dlopen_libs=
+
   case $host_os in
-  freebsd2*)
-    shlibpath_overrides_runpath=yes
-    ;;
-  freebsd3.[01]* | freebsdelf3.[01]*)
-    shlibpath_overrides_runpath=yes
-    hardcode_into_libs=yes
-    ;;
-  freebsd3.[2-9]* | freebsdelf3.[2-9]* | \
-  freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1)
-    shlibpath_overrides_runpath=no
-    hardcode_into_libs=yes
-    ;;
-  *) # from 4.6 on, and DragonFly
-    shlibpath_overrides_runpath=yes
-    hardcode_into_libs=yes
+  beos*)
+    lt_cv_dlopen="load_add_on"
+    lt_cv_dlopen_libs=
+    lt_cv_dlopen_self=yes
     ;;
-  esac
-  ;;
-
-gnu*)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  hardcode_into_libs=yes
-  ;;
 
-hpux9* | hpux10* | hpux11*)
-  # Give a soname corresponding to the major version so that dld.sl refuses to
-  # link against other versions.
-  version_type=sunos
-  need_lib_prefix=no
-  need_version=no
-  case $host_cpu in
-  ia64*)
-    shrext_cmds='.so'
-    hardcode_into_libs=yes
-    dynamic_linker="$host_os dld.so"
-    shlibpath_var=LD_LIBRARY_PATH
-    shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
-    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-    soname_spec='${libname}${release}${shared_ext}$major'
-    if test "X$HPUX_IA64_MODE" = X32; then
-      sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
-    else
-      sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
-    fi
-    sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+  mingw* | pw32* | cegcc*)
+    lt_cv_dlopen="LoadLibrary"
+    lt_cv_dlopen_libs=
     ;;
-   hppa*64*)
-     shrext_cmds='.sl'
-     hardcode_into_libs=yes
-     dynamic_linker="$host_os dld.sl"
-     shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
-     shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
-     library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-     soname_spec='${libname}${release}${shared_ext}$major'
-     sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
-     sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
-     ;;
-   *)
-    shrext_cmds='.sl'
-    dynamic_linker="$host_os dld.sl"
-    shlibpath_var=SHLIB_PATH
-    shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
-    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-    soname_spec='${libname}${release}${shared_ext}$major'
+
+  cygwin*)
+    lt_cv_dlopen="dlopen"
+    lt_cv_dlopen_libs=
     ;;
-  esac
-  # HP-UX runs *really* slowly unless shared libraries are mode 555.
-  postinstall_cmds='chmod 555 $lib'
-  ;;
 
-interix[3-9]*)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=no
-  hardcode_into_libs=yes
-  ;;
+  darwin*)
+  # if libdl is installed we need to link against it
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5
+$as_echo_n "checking for dlopen in -ldl... " >&6; }
+if test "${ac_cv_lib_dl_dlopen+set}" = set; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-ldl  $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
+
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char dlopen ();
+int
+main ()
+{
+return dlopen ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_lib_dl_dlopen=yes
+else
+  ac_cv_lib_dl_dlopen=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5
+$as_echo "$ac_cv_lib_dl_dlopen" >&6; }
+if test "x$ac_cv_lib_dl_dlopen" = x""yes; then :
+  lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
+else
+
+    lt_cv_dlopen="dyld"
+    lt_cv_dlopen_libs=
+    lt_cv_dlopen_self=yes
+
+fi
 
-irix5* | irix6* | nonstopux*)
-  case $host_os in
-    nonstopux*) version_type=nonstopux ;;
-    *)
-	if test "$lt_cv_prog_gnu_ld" = yes; then
-		version_type=linux
-	else
-		version_type=irix
-	fi ;;
-  esac
-  need_lib_prefix=no
-  need_version=no
-  soname_spec='${libname}${release}${shared_ext}$major'
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
-  case $host_os in
-  irix5* | nonstopux*)
-    libsuff= shlibsuff=
     ;;
+
   *)
-    case $LD in # libtool.m4 will add one of these switches to LD
-    *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
-      libsuff= shlibsuff= libmagic=32-bit;;
-    *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
-      libsuff=32 shlibsuff=N32 libmagic=N32;;
-    *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
-      libsuff=64 shlibsuff=64 libmagic=64-bit;;
-    *) libsuff= shlibsuff= libmagic=never-match;;
-    esac
-    ;;
-  esac
-  shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
-  shlibpath_overrides_runpath=no
-  sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
-  sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
-  hardcode_into_libs=yes
-  ;;
+    ac_fn_c_check_func "$LINENO" "shl_load" "ac_cv_func_shl_load"
+if test "x$ac_cv_func_shl_load" = x""yes; then :
+  lt_cv_dlopen="shl_load"
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for shl_load in -ldld" >&5
+$as_echo_n "checking for shl_load in -ldld... " >&6; }
+if test "${ac_cv_lib_dld_shl_load+set}" = set; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-ldld  $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
 
-# No shared lib support for Linux oldld, aout, or coff.
-linux*oldld* | linux*aout* | linux*coff*)
-  dynamic_linker=no
-  ;;
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char shl_load ();
+int
+main ()
+{
+return shl_load ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_lib_dld_shl_load=yes
+else
+  ac_cv_lib_dld_shl_load=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_shl_load" >&5
+$as_echo "$ac_cv_lib_dld_shl_load" >&6; }
+if test "x$ac_cv_lib_dld_shl_load" = x""yes; then :
+  lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld"
+else
+  ac_fn_c_check_func "$LINENO" "dlopen" "ac_cv_func_dlopen"
+if test "x$ac_cv_func_dlopen" = x""yes; then :
+  lt_cv_dlopen="dlopen"
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5
+$as_echo_n "checking for dlopen in -ldl... " >&6; }
+if test "${ac_cv_lib_dl_dlopen+set}" = set; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-ldl  $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
 
-# This must be Linux ELF.
-linux* | k*bsd*-gnu)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=no
-  # This implies no fast_install, which is unacceptable.
-  # Some rework will be needed to allow for fast_install
-  # before this can be enabled.
-  hardcode_into_libs=yes
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char dlopen ();
+int
+main ()
+{
+return dlopen ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_lib_dl_dlopen=yes
+else
+  ac_cv_lib_dl_dlopen=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5
+$as_echo "$ac_cv_lib_dl_dlopen" >&6; }
+if test "x$ac_cv_lib_dl_dlopen" = x""yes; then :
+  lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -lsvld" >&5
+$as_echo_n "checking for dlopen in -lsvld... " >&6; }
+if test "${ac_cv_lib_svld_dlopen+set}" = set; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-lsvld  $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
 
-  # find out which ABI we are using
-  libsuff=
-  case "$host_cpu" in
-  x86_64*|s390x*|powerpc64*)
-    echo '#line 17846 "configure"' > conftest.$ac_ext
-    if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; then
-      case `/usr/bin/file conftest.$ac_objext` in
-      *64-bit*)
-        libsuff=64
-        ;;
-      esac
-    fi
-    rm -rf conftest*
-    ;;
-  esac
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char dlopen ();
+int
+main ()
+{
+return dlopen ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_lib_svld_dlopen=yes
+else
+  ac_cv_lib_svld_dlopen=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_svld_dlopen" >&5
+$as_echo "$ac_cv_lib_svld_dlopen" >&6; }
+if test "x$ac_cv_lib_svld_dlopen" = x""yes; then :
+  lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dld_link in -ldld" >&5
+$as_echo_n "checking for dld_link in -ldld... " >&6; }
+if test "${ac_cv_lib_dld_dld_link+set}" = set; then :
+  $as_echo_n "(cached) " >&6
+else
+  ac_check_lib_save_LIBS=$LIBS
+LIBS="-ldld  $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
 
-  sys_lib_dlsearch_path_spec="/lib${libsuff} /usr/lib${libsuff}"
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
+#ifdef __cplusplus
+extern "C"
+#endif
+char dld_link ();
+int
+main ()
+{
+return dld_link ();
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+  ac_cv_lib_dld_dld_link=yes
+else
+  ac_cv_lib_dld_dld_link=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_dld_link" >&5
+$as_echo "$ac_cv_lib_dld_dld_link" >&6; }
+if test "x$ac_cv_lib_dld_dld_link" = x""yes; then :
+  lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld"
+fi
 
-  # Append ld.so.conf contents to the search path
-  if test -f /etc/ld.so.conf; then
-    lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ 	]*hwcap[ 	]/d;s/[:,	]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
-    sys_lib_dlsearch_path_spec="$sys_lib_dlsearch_path_spec $lt_ld_extra"
-  fi
 
-  # We used to test for /lib/ld.so.1 and disable shared libraries on
-  # powerpc, because MkLinux only supported shared libraries with the
-  # GNU dynamic linker.  Since this was broken with cross compilers,
-  # most powerpc-linux boxes support dynamic linking these days and
-  # people can always --disable-shared, the test was removed, and we
-  # assume the GNU/Linux dynamic linker is in use.
-  dynamic_linker='GNU/Linux ld.so'
-  ;;
+fi
 
-netbsd*)
-  version_type=sunos
-  need_lib_prefix=no
-  need_version=no
-  if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
-    finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
-    dynamic_linker='NetBSD (a.out) ld.so'
-  else
-    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
-    soname_spec='${libname}${release}${shared_ext}$major'
-    dynamic_linker='NetBSD ld.elf_so'
-  fi
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
-  hardcode_into_libs=yes
-  ;;
 
-newsos6)
-  version_type=linux
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
-  ;;
-
-nto-qnx*)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
-  ;;
+fi
 
-openbsd*)
-  version_type=sunos
-  sys_lib_dlsearch_path_spec="/usr/lib"
-  need_lib_prefix=no
-  # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
-  case $host_os in
-    openbsd3.3 | openbsd3.3.*) need_version=yes ;;
-    *)                         need_version=no  ;;
-  esac
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
-  finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
-  shlibpath_var=LD_LIBRARY_PATH
-  if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-    case $host_os in
-      openbsd2.[89] | openbsd2.[89].*)
-	shlibpath_overrides_runpath=no
-	;;
-      *)
-	shlibpath_overrides_runpath=yes
-	;;
-      esac
-  else
-    shlibpath_overrides_runpath=yes
-  fi
-  ;;
 
-os2*)
-  libname_spec='$name'
-  shrext_cmds=".dll"
-  need_lib_prefix=no
-  library_names_spec='$libname${shared_ext} $libname.a'
-  dynamic_linker='OS/2 ld.exe'
-  shlibpath_var=LIBPATH
-  ;;
+fi
 
-osf3* | osf4* | osf5*)
-  version_type=osf
-  need_lib_prefix=no
-  need_version=no
-  soname_spec='${libname}${release}${shared_ext}$major'
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  shlibpath_var=LD_LIBRARY_PATH
-  sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
-  sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
-  ;;
 
-rdos*)
-  dynamic_linker=no
-  ;;
+fi
 
-solaris*)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
-  hardcode_into_libs=yes
-  # ldd complains unless libraries are executable
-  postinstall_cmds='chmod +x $lib'
-  ;;
 
-sunos4*)
-  version_type=sunos
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
-  finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
-  if test "$with_gnu_ld" = yes; then
-    need_lib_prefix=no
-  fi
-  need_version=yes
-  ;;
+fi
 
-sysv4 | sysv4.3*)
-  version_type=linux
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  case $host_vendor in
-    sni)
-      shlibpath_overrides_runpath=no
-      need_lib_prefix=no
-      export_dynamic_flag_spec='${wl}-Blargedynsym'
-      runpath_var=LD_RUN_PATH
-      ;;
-    siemens)
-      need_lib_prefix=no
-      ;;
-    motorola)
-      need_lib_prefix=no
-      need_version=no
-      shlibpath_overrides_runpath=no
-      sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
-      ;;
+    ;;
   esac
-  ;;
-
-sysv4*MP*)
-  if test -d /usr/nec ;then
-    version_type=linux
-    library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
-    soname_spec='$libname${shared_ext}.$major'
-    shlibpath_var=LD_LIBRARY_PATH
-  fi
-  ;;
 
-sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
-  version_type=freebsd-elf
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  hardcode_into_libs=yes
-  if test "$with_gnu_ld" = yes; then
-    sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
-    shlibpath_overrides_runpath=no
+  if test "x$lt_cv_dlopen" != xno; then
+    enable_dlopen=yes
   else
-    sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
-    shlibpath_overrides_runpath=yes
-    case $host_os in
-      sco3.2v5*)
-        sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
-	;;
-    esac
+    enable_dlopen=no
   fi
-  sys_lib_dlsearch_path_spec='/usr/lib'
-  ;;
 
-uts4*)
-  version_type=linux
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  ;;
+  case $lt_cv_dlopen in
+  dlopen)
+    save_CPPFLAGS="$CPPFLAGS"
+    test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
 
-*)
-  dynamic_linker=no
-  ;;
-esac
-{ $as_echo "$as_me:$LINENO: result: $dynamic_linker" >&5
-$as_echo "$dynamic_linker" >&6; }
-test "$dynamic_linker" = no && can_build_shared=no
+    save_LDFLAGS="$LDFLAGS"
+    wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
 
-if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
-  lt_cv_sys_lib_search_path_spec="$sys_lib_search_path_spec"
-fi
+    save_LIBS="$LIBS"
+    LIBS="$lt_cv_dlopen_libs $LIBS"
 
-sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec"
-if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a program can dlopen itself" >&5
+$as_echo_n "checking whether a program can dlopen itself... " >&6; }
+if test "${lt_cv_dlopen_self+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
-  lt_cv_sys_lib_dlsearch_path_spec="$sys_lib_dlsearch_path_spec"
-fi
+  	  if test "$cross_compiling" = yes; then :
+  lt_cv_dlopen_self=cross
+else
+  lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
+  lt_status=$lt_dlunknown
+  cat > conftest.$ac_ext <<_LT_EOF
+#line 12508 "configure"
+#include "confdefs.h"
 
-sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec"
+#if HAVE_DLFCN_H
+#include <dlfcn.h>
+#endif
 
-variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
-if test "$GCC" = yes; then
-  variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
-fi
+#include <stdio.h>
 
-{ $as_echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5
-$as_echo_n "checking how to hardcode library paths into programs... " >&6; }
-hardcode_action_F77=
-if test -n "$hardcode_libdir_flag_spec_F77" || \
-   test -n "$runpath_var_F77" || \
-   test "X$hardcode_automatic_F77" = "Xyes" ; then
+#ifdef RTLD_GLOBAL
+#  define LT_DLGLOBAL		RTLD_GLOBAL
+#else
+#  ifdef DL_GLOBAL
+#    define LT_DLGLOBAL		DL_GLOBAL
+#  else
+#    define LT_DLGLOBAL		0
+#  endif
+#endif
 
-  # We can hardcode non-existant directories.
-  if test "$hardcode_direct_F77" != no &&
-     # If the only mechanism to avoid hardcoding is shlibpath_var, we
-     # have to relink, otherwise we might link with an installed library
-     # when we should be linking with a yet-to-be-installed one
-     ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, F77)" != no &&
-     test "$hardcode_minus_L_F77" != no; then
-    # Linking always hardcodes the temporary library directory.
-    hardcode_action_F77=relink
+/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
+   find out it does not work in some platform. */
+#ifndef LT_DLLAZY_OR_NOW
+#  ifdef RTLD_LAZY
+#    define LT_DLLAZY_OR_NOW		RTLD_LAZY
+#  else
+#    ifdef DL_LAZY
+#      define LT_DLLAZY_OR_NOW		DL_LAZY
+#    else
+#      ifdef RTLD_NOW
+#        define LT_DLLAZY_OR_NOW	RTLD_NOW
+#      else
+#        ifdef DL_NOW
+#          define LT_DLLAZY_OR_NOW	DL_NOW
+#        else
+#          define LT_DLLAZY_OR_NOW	0
+#        endif
+#      endif
+#    endif
+#  endif
+#endif
+
+void fnord() { int i=42;}
+int main ()
+{
+  void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
+  int status = $lt_dlunknown;
+
+  if (self)
+    {
+      if (dlsym (self,"fnord"))       status = $lt_dlno_uscore;
+      else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
+      /* dlclose (self); */
+    }
   else
-    # We can link without hardcoding, and we can hardcode nonexisting dirs.
-    hardcode_action_F77=immediate
+    puts (dlerror ());
+
+  return status;
+}
+_LT_EOF
+  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5
+  (eval $ac_link) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } && test -s conftest${ac_exeext} 2>/dev/null; then
+    (./conftest; exit; ) >&5 2>/dev/null
+    lt_status=$?
+    case x$lt_status in
+      x$lt_dlno_uscore) lt_cv_dlopen_self=yes ;;
+      x$lt_dlneed_uscore) lt_cv_dlopen_self=yes ;;
+      x$lt_dlunknown|x*) lt_cv_dlopen_self=no ;;
+    esac
+  else :
+    # compilation failed
+    lt_cv_dlopen_self=no
   fi
-else
-  # We cannot hardcode anything, or else we can only hardcode existing
-  # directories.
-  hardcode_action_F77=unsupported
 fi
-{ $as_echo "$as_me:$LINENO: result: $hardcode_action_F77" >&5
-$as_echo "$hardcode_action_F77" >&6; }
+rm -fr conftest*
 
-if test "$hardcode_action_F77" = relink; then
-  # Fast installation is not supported
-  enable_fast_install=no
-elif test "$shlibpath_overrides_runpath" = yes ||
-     test "$enable_shared" = no; then
-  # Fast installation is not necessary
-  enable_fast_install=needless
-fi
 
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_dlopen_self" >&5
+$as_echo "$lt_cv_dlopen_self" >&6; }
 
-# The else clause should only fire when bootstrapping the
-# libtool distribution, otherwise you forgot to ship ltmain.sh
-# with your package, and you will get complaints that there are
-# no rules to generate ltmain.sh.
-if test -f "$ltmain"; then
-  # See if we are running on zsh, and set the options which allow our commands through
-  # without removal of \ escapes.
-  if test -n "${ZSH_VERSION+set}" ; then
-    setopt NO_GLOB_SUBST
-  fi
-  # Now quote all the things that may contain metacharacters while being
-  # careful not to overquote the AC_SUBSTed values.  We take copies of the
-  # variables and quote the copies for generation of the libtool script.
-  for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \
-    SED SHELL STRIP \
-    libname_spec library_names_spec soname_spec extract_expsyms_cmds \
-    old_striplib striplib file_magic_cmd finish_cmds finish_eval \
-    deplibs_check_method reload_flag reload_cmds need_locks \
-    lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \
-    lt_cv_sys_global_symbol_to_c_name_address \
-    sys_lib_search_path_spec sys_lib_dlsearch_path_spec \
-    old_postinstall_cmds old_postuninstall_cmds \
-    compiler_F77 \
-    CC_F77 \
-    LD_F77 \
-    lt_prog_compiler_wl_F77 \
-    lt_prog_compiler_pic_F77 \
-    lt_prog_compiler_static_F77 \
-    lt_prog_compiler_no_builtin_flag_F77 \
-    export_dynamic_flag_spec_F77 \
-    thread_safe_flag_spec_F77 \
-    whole_archive_flag_spec_F77 \
-    enable_shared_with_static_runtimes_F77 \
-    old_archive_cmds_F77 \
-    old_archive_from_new_cmds_F77 \
-    predep_objects_F77 \
-    postdep_objects_F77 \
-    predeps_F77 \
-    postdeps_F77 \
-    compiler_lib_search_path_F77 \
-    compiler_lib_search_dirs_F77 \
-    archive_cmds_F77 \
-    archive_expsym_cmds_F77 \
-    postinstall_cmds_F77 \
-    postuninstall_cmds_F77 \
-    old_archive_from_expsyms_cmds_F77 \
-    allow_undefined_flag_F77 \
-    no_undefined_flag_F77 \
-    export_symbols_cmds_F77 \
-    hardcode_libdir_flag_spec_F77 \
-    hardcode_libdir_flag_spec_ld_F77 \
-    hardcode_libdir_separator_F77 \
-    hardcode_automatic_F77 \
-    module_cmds_F77 \
-    module_expsym_cmds_F77 \
-    lt_cv_prog_compiler_c_o_F77 \
-    fix_srcfile_path_F77 \
-    exclude_expsyms_F77 \
-    include_expsyms_F77; do
-
-    case $var in
-    old_archive_cmds_F77 | \
-    old_archive_from_new_cmds_F77 | \
-    archive_cmds_F77 | \
-    archive_expsym_cmds_F77 | \
-    module_cmds_F77 | \
-    module_expsym_cmds_F77 | \
-    old_archive_from_expsyms_cmds_F77 | \
-    export_symbols_cmds_F77 | \
-    extract_expsyms_cmds | reload_cmds | finish_cmds | \
-    postinstall_cmds | postuninstall_cmds | \
-    old_postinstall_cmds | old_postuninstall_cmds | \
-    sys_lib_search_path_spec | sys_lib_dlsearch_path_spec)
-      # Double-quote double-evaled strings.
-      eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\""
-      ;;
-    *)
-      eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\""
-      ;;
-    esac
-  done
-
-  case $lt_echo in
-  *'\$0 --fallback-echo"')
-    lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'`
-    ;;
-  esac
+    if test "x$lt_cv_dlopen_self" = xyes; then
+      wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\"
+      { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a statically linked program can dlopen itself" >&5
+$as_echo_n "checking whether a statically linked program can dlopen itself... " >&6; }
+if test "${lt_cv_dlopen_self_static+set}" = set; then :
+  $as_echo_n "(cached) " >&6
+else
+  	  if test "$cross_compiling" = yes; then :
+  lt_cv_dlopen_self_static=cross
+else
+  lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
+  lt_status=$lt_dlunknown
+  cat > conftest.$ac_ext <<_LT_EOF
+#line 12604 "configure"
+#include "confdefs.h"
 
-cfgfile="$ofile"
+#if HAVE_DLFCN_H
+#include <dlfcn.h>
+#endif
 
-  cat <<__EOF__ >> "$cfgfile"
-# ### BEGIN LIBTOOL TAG CONFIG: $tagname
+#include <stdio.h>
 
-# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
+#ifdef RTLD_GLOBAL
+#  define LT_DLGLOBAL		RTLD_GLOBAL
+#else
+#  ifdef DL_GLOBAL
+#    define LT_DLGLOBAL		DL_GLOBAL
+#  else
+#    define LT_DLGLOBAL		0
+#  endif
+#endif
 
-# Shell to use when invoking shell scripts.
-SHELL=$lt_SHELL
+/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
+   find out it does not work in some platform. */
+#ifndef LT_DLLAZY_OR_NOW
+#  ifdef RTLD_LAZY
+#    define LT_DLLAZY_OR_NOW		RTLD_LAZY
+#  else
+#    ifdef DL_LAZY
+#      define LT_DLLAZY_OR_NOW		DL_LAZY
+#    else
+#      ifdef RTLD_NOW
+#        define LT_DLLAZY_OR_NOW	RTLD_NOW
+#      else
+#        ifdef DL_NOW
+#          define LT_DLLAZY_OR_NOW	DL_NOW
+#        else
+#          define LT_DLLAZY_OR_NOW	0
+#        endif
+#      endif
+#    endif
+#  endif
+#endif
 
-# Whether or not to build shared libraries.
-build_libtool_libs=$enable_shared
+void fnord() { int i=42;}
+int main ()
+{
+  void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
+  int status = $lt_dlunknown;
 
-# Whether or not to build static libraries.
-build_old_libs=$enable_static
+  if (self)
+    {
+      if (dlsym (self,"fnord"))       status = $lt_dlno_uscore;
+      else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
+      /* dlclose (self); */
+    }
+  else
+    puts (dlerror ());
 
-# Whether or not to add -lc for building shared libraries.
-build_libtool_need_lc=$archive_cmds_need_lc_F77
+  return status;
+}
+_LT_EOF
+  if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5
+  (eval $ac_link) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } && test -s conftest${ac_exeext} 2>/dev/null; then
+    (./conftest; exit; ) >&5 2>/dev/null
+    lt_status=$?
+    case x$lt_status in
+      x$lt_dlno_uscore) lt_cv_dlopen_self_static=yes ;;
+      x$lt_dlneed_uscore) lt_cv_dlopen_self_static=yes ;;
+      x$lt_dlunknown|x*) lt_cv_dlopen_self_static=no ;;
+    esac
+  else :
+    # compilation failed
+    lt_cv_dlopen_self_static=no
+  fi
+fi
+rm -fr conftest*
 
-# Whether or not to disallow shared libs when runtime libs are static
-allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes_F77
 
-# Whether or not to optimize for fast installation.
-fast_install=$enable_fast_install
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_dlopen_self_static" >&5
+$as_echo "$lt_cv_dlopen_self_static" >&6; }
+    fi
 
-# The host system.
-host_alias=$host_alias
-host=$host
-host_os=$host_os
+    CPPFLAGS="$save_CPPFLAGS"
+    LDFLAGS="$save_LDFLAGS"
+    LIBS="$save_LIBS"
+    ;;
+  esac
 
-# The build system.
-build_alias=$build_alias
-build=$build
-build_os=$build_os
+  case $lt_cv_dlopen_self in
+  yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;;
+  *) enable_dlopen_self=unknown ;;
+  esac
 
-# An echo program that does not interpret backslashes.
-echo=$lt_echo
+  case $lt_cv_dlopen_self_static in
+  yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;;
+  *) enable_dlopen_self_static=unknown ;;
+  esac
+fi
 
-# The archiver.
-AR=$lt_AR
-AR_FLAGS=$lt_AR_FLAGS
 
-# A C compiler.
-LTCC=$lt_LTCC
 
-# LTCC compiler flags.
-LTCFLAGS=$lt_LTCFLAGS
 
-# A language-specific compiler.
-CC=$lt_compiler_F77
 
-# Is the compiler the GNU C compiler?
-with_gcc=$GCC_F77
 
-# An ERE matcher.
-EGREP=$lt_EGREP
 
-# The linker used to build libraries.
-LD=$lt_LD_F77
 
-# Whether we need hard or soft links.
-LN_S=$lt_LN_S
 
-# A BSD-compatible nm program.
-NM=$lt_NM
 
-# A symbol stripping program
-STRIP=$lt_STRIP
 
-# Used to examine libraries when file_magic_cmd begins "file"
-MAGIC_CMD=$MAGIC_CMD
 
-# Used on cygwin: DLL creation program.
-DLLTOOL="$DLLTOOL"
 
-# Used on cygwin: object dumper.
-OBJDUMP="$OBJDUMP"
 
-# Used on cygwin: assembler.
-AS="$AS"
 
-# The name of the directory that contains temporary libtool files.
-objdir=$objdir
 
-# How to create reloadable object files.
-reload_flag=$lt_reload_flag
-reload_cmds=$lt_reload_cmds
 
-# How to pass a linker flag through the compiler.
-wl=$lt_lt_prog_compiler_wl_F77
+striplib=
+old_striplib=
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether stripping libraries is possible" >&5
+$as_echo_n "checking whether stripping libraries is possible... " >&6; }
+if test -n "$STRIP" && $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then
+  test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
+  test -z "$striplib" && striplib="$STRIP --strip-unneeded"
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+else
+# FIXME - insert some real tests, host_os isn't really good enough
+  case $host_os in
+  darwin*)
+    if test -n "$STRIP" ; then
+      striplib="$STRIP -x"
+      old_striplib="$STRIP -S"
+      { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+    else
+      { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+    fi
+    ;;
+  *)
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+    ;;
+  esac
+fi
 
-# Object file suffix (normally "o").
-objext="$ac_objext"
 
-# Old archive suffix (normally "a").
-libext="$libext"
 
-# Shared library suffix (normally ".so").
-shrext_cmds='$shrext_cmds'
 
-# Executable file suffix (normally "").
-exeext="$exeext"
 
-# Additional compiler flags for building library objects.
-pic_flag=$lt_lt_prog_compiler_pic_F77
-pic_mode=$pic_mode
 
-# What is the maximum length of a command?
-max_cmd_len=$lt_cv_sys_max_cmd_len
 
-# Does compiler simultaneously support -c and -o options?
-compiler_c_o=$lt_lt_cv_prog_compiler_c_o_F77
 
-# Must we lock files when doing compilation?
-need_locks=$lt_need_locks
 
-# Do we need the lib prefix for modules?
-need_lib_prefix=$need_lib_prefix
 
-# Do we need a version for libraries?
-need_version=$need_version
 
-# Whether dlopen is supported.
-dlopen_support=$enable_dlopen
 
-# Whether dlopen of programs is supported.
-dlopen_self=$enable_dlopen_self
+  # Report which library types will actually be built
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if libtool supports shared libraries" >&5
+$as_echo_n "checking if libtool supports shared libraries... " >&6; }
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $can_build_shared" >&5
+$as_echo "$can_build_shared" >&6; }
 
-# Whether dlopen of statically linked programs is supported.
-dlopen_self_static=$enable_dlopen_self_static
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build shared libraries" >&5
+$as_echo_n "checking whether to build shared libraries... " >&6; }
+  test "$can_build_shared" = "no" && enable_shared=no
 
-# Compiler flag to prevent dynamic linking.
-link_static_flag=$lt_lt_prog_compiler_static_F77
+  # On AIX, shared libraries and static libraries use the same namespace, and
+  # are all built from PIC.
+  case $host_os in
+  aix3*)
+    test "$enable_shared" = yes && enable_static=no
+    if test -n "$RANLIB"; then
+      archive_cmds="$archive_cmds~\$RANLIB \$lib"
+      postinstall_cmds='$RANLIB $lib'
+    fi
+    ;;
 
-# Compiler flag to turn off builtin functions.
-no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_F77
+  aix[4-9]*)
+    if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
+      test "$enable_shared" = yes && enable_static=no
+    fi
+    ;;
+  esac
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_shared" >&5
+$as_echo "$enable_shared" >&6; }
 
-# Compiler flag to allow reflexive dlopens.
-export_dynamic_flag_spec=$lt_export_dynamic_flag_spec_F77
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build static libraries" >&5
+$as_echo_n "checking whether to build static libraries... " >&6; }
+  # Make sure either enable_shared or enable_static is yes.
+  test "$enable_shared" = yes || enable_static=yes
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_static" >&5
+$as_echo "$enable_static" >&6; }
 
-# Compiler flag to generate shared objects directly from archives.
-whole_archive_flag_spec=$lt_whole_archive_flag_spec_F77
 
-# Compiler flag to generate thread-safe objects.
-thread_safe_flag_spec=$lt_thread_safe_flag_spec_F77
 
-# Library versioning type.
-version_type=$version_type
 
-# Format of library name prefix.
-libname_spec=$lt_libname_spec
+fi
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
 
-# List of archive names.  First name is the real one, the rest are links.
-# The last name is the one that the linker finds with -lNAME.
-library_names_spec=$lt_library_names_spec
+CC="$lt_save_CC"
 
-# The coded name of the library, if different from the real name.
-soname_spec=$lt_soname_spec
 
-# Commands used to build and install an old-style archive.
-RANLIB=$lt_RANLIB
-old_archive_cmds=$lt_old_archive_cmds_F77
-old_postinstall_cmds=$lt_old_postinstall_cmds
-old_postuninstall_cmds=$lt_old_postuninstall_cmds
+ac_ext=cpp
+ac_cpp='$CXXCPP $CPPFLAGS'
+ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
 
-# Create an old-style archive from a shared archive.
-old_archive_from_new_cmds=$lt_old_archive_from_new_cmds_F77
+archive_cmds_need_lc_CXX=no
+allow_undefined_flag_CXX=
+always_export_symbols_CXX=no
+archive_expsym_cmds_CXX=
+compiler_needs_object_CXX=no
+export_dynamic_flag_spec_CXX=
+hardcode_direct_CXX=no
+hardcode_direct_absolute_CXX=no
+hardcode_libdir_flag_spec_CXX=
+hardcode_libdir_flag_spec_ld_CXX=
+hardcode_libdir_separator_CXX=
+hardcode_minus_L_CXX=no
+hardcode_shlibpath_var_CXX=unsupported
+hardcode_automatic_CXX=no
+inherit_rpath_CXX=no
+module_cmds_CXX=
+module_expsym_cmds_CXX=
+link_all_deplibs_CXX=unknown
+old_archive_cmds_CXX=$old_archive_cmds
+no_undefined_flag_CXX=
+whole_archive_flag_spec_CXX=
+enable_shared_with_static_runtimes_CXX=no
 
-# Create a temporary old-style archive to link instead of a shared archive.
-old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds_F77
+# Source file extension for C++ test sources.
+ac_ext=cpp
 
-# Commands used to build and install a shared archive.
-archive_cmds=$lt_archive_cmds_F77
-archive_expsym_cmds=$lt_archive_expsym_cmds_F77
-postinstall_cmds=$lt_postinstall_cmds
-postuninstall_cmds=$lt_postuninstall_cmds
+# Object file extension for compiled C++ test sources.
+objext=o
+objext_CXX=$objext
 
-# Commands used to build a loadable module (assumed same as above if empty)
-module_cmds=$lt_module_cmds_F77
-module_expsym_cmds=$lt_module_expsym_cmds_F77
+# No sense in running all these tests if we already determined that
+# the CXX compiler isn't working.  Some variables (like enable_shared)
+# are currently assumed to apply to all compilers on this platform,
+# and will be corrupted by setting them based on a non-working compiler.
+if test "$_lt_caught_CXX_error" != yes; then
+  # Code to be used in simple compile tests
+  lt_simple_compile_test_code="int some_variable = 0;"
 
-# Commands to strip libraries.
-old_striplib=$lt_old_striplib
-striplib=$lt_striplib
+  # Code to be used in simple link tests
+  lt_simple_link_test_code='int main(int, char *[]) { return(0); }'
 
-# Dependencies to place before the objects being linked to create a
-# shared library.
-predep_objects=$lt_predep_objects_F77
-
-# Dependencies to place after the objects being linked to create a
-# shared library.
-postdep_objects=$lt_postdep_objects_F77
-
-# Dependencies to place before the objects being linked to create a
-# shared library.
-predeps=$lt_predeps_F77
-
-# Dependencies to place after the objects being linked to create a
-# shared library.
-postdeps=$lt_postdeps_F77
-
-# The directories searched by this compiler when creating a shared
-# library
-compiler_lib_search_dirs=$lt_compiler_lib_search_dirs_F77
+  # ltmain only uses $CC for tagged configurations so make sure $CC is set.
 
-# The library search path used internally by the compiler when linking
-# a shared library.
-compiler_lib_search_path=$lt_compiler_lib_search_path_F77
 
-# Method to check whether dependent libraries are shared objects.
-deplibs_check_method=$lt_deplibs_check_method
 
-# Command to use when deplibs_check_method == file_magic.
-file_magic_cmd=$lt_file_magic_cmd
 
-# Flag that allows shared libraries with undefined symbols to be built.
-allow_undefined_flag=$lt_allow_undefined_flag_F77
 
-# Flag that forces no undefined symbols.
-no_undefined_flag=$lt_no_undefined_flag_F77
-
-# Commands used to finish a libtool library installation in a directory.
-finish_cmds=$lt_finish_cmds
-
-# Same as above, but a single script fragment to be evaled but not shown.
-finish_eval=$lt_finish_eval
-
-# Take the output of nm and produce a listing of raw symbols and C names.
-global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe
-
-# Transform the output of nm in a proper C declaration
-global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl
-
-# Transform the output of nm in a C name address pair
-global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
-
-# This is the shared library runtime path variable.
-runpath_var=$runpath_var
-
-# This is the shared library path variable.
-shlibpath_var=$shlibpath_var
-
-# Is shlibpath searched before the hard-coded library search path?
-shlibpath_overrides_runpath=$shlibpath_overrides_runpath
-
-# How to hardcode a shared library path into an executable.
-hardcode_action=$hardcode_action_F77
-
-# Whether we should hardcode library paths into libraries.
-hardcode_into_libs=$hardcode_into_libs
-
-# Flag to hardcode \$libdir into a binary during linking.
-# This must work even if \$libdir does not exist.
-hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_F77
-
-# If ld is used when linking, flag to hardcode \$libdir into
-# a binary during linking. This must work even if \$libdir does
-# not exist.
-hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_F77
-
-# Whether we need a single -rpath flag with a separated argument.
-hardcode_libdir_separator=$lt_hardcode_libdir_separator_F77
-
-# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the
-# resulting binary.
-hardcode_direct=$hardcode_direct_F77
-
-# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
-# resulting binary.
-hardcode_minus_L=$hardcode_minus_L_F77
-
-# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into
-# the resulting binary.
-hardcode_shlibpath_var=$hardcode_shlibpath_var_F77
-
-# Set to yes if building a shared library automatically hardcodes DIR into the library
-# and all subsequent libraries and executables linked against it.
-hardcode_automatic=$hardcode_automatic_F77
-
-# Variables whose values should be saved in libtool wrapper scripts and
-# restored at relink time.
-variables_saved_for_relink="$variables_saved_for_relink"
-
-# Whether libtool must link a program against all its dependency libraries.
-link_all_deplibs=$link_all_deplibs_F77
-
-# Compile-time system search path for libraries
-sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
-
-# Run-time system search path for libraries
-sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
-
-# Fix the shell variable \$srcfile for the compiler.
-fix_srcfile_path=$lt_fix_srcfile_path
-
-# Set to yes if exported symbols are required.
-always_export_symbols=$always_export_symbols_F77
-
-# The commands to list exported symbols.
-export_symbols_cmds=$lt_export_symbols_cmds_F77
-
-# The commands to extract the exported symbol list from a shared archive.
-extract_expsyms_cmds=$lt_extract_expsyms_cmds
-
-# Symbols that should not be listed in the preloaded symbols.
-exclude_expsyms=$lt_exclude_expsyms_F77
-
-# Symbols that must always be exported.
-include_expsyms=$lt_include_expsyms_F77
-
-# ### END LIBTOOL TAG CONFIG: $tagname
-
-__EOF__
-
-
-else
-  # If there is no Makefile yet, we rely on a make rule to execute
-  # `config.status --recheck' to rerun these tests and create the
-  # libtool script then.
-  ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'`
-  if test -f "$ltmain_in"; then
-    test -f Makefile && make "$ltmain"
-  fi
-fi
-
-
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-CC="$lt_save_CC"
-
-	else
-	  tagname=""
-	fi
-	;;
-
-      GCJ)
-	if test -n "$GCJ" && test "X$GCJ" != "Xno"; then
-
-
-# Source file extension for Java test sources.
-ac_ext=java
-
-# Object file extension for compiled Java test sources.
-objext=o
-objext_GCJ=$objext
-
-# Code to be used in simple compile tests
-lt_simple_compile_test_code="class foo {}"
-
-# Code to be used in simple link tests
-lt_simple_link_test_code='public class conftest { public static void main(String[] argv) {}; }'
-
-# ltmain only uses $CC for tagged configurations so make sure $CC is set.
 
 # If no C compiler was specified, use CC.
 LTCC=${LTCC-"$CC"}
@@ -18571,26 +12873,42 @@
 compiler=$CC
 
 
-# save warnings/boilerplate of simple test code
-ac_outfile=conftest.$ac_objext
+  # save warnings/boilerplate of simple test code
+  ac_outfile=conftest.$ac_objext
 echo "$lt_simple_compile_test_code" >conftest.$ac_ext
 eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
 _lt_compiler_boilerplate=`cat conftest.err`
-$rm conftest*
+$RM conftest*
 
-ac_outfile=conftest.$ac_objext
+  ac_outfile=conftest.$ac_objext
 echo "$lt_simple_link_test_code" >conftest.$ac_ext
 eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
 _lt_linker_boilerplate=`cat conftest.err`
-$rm -r conftest*
+$RM -r conftest*
 
 
-# Allow CC to be a program name with arguments.
-lt_save_CC="$CC"
-CC=${GCJ-"gcj"}
-compiler=$CC
-compiler_GCJ=$CC
-for cc_temp in $compiler""; do
+  # Allow CC to be a program name with arguments.
+  lt_save_CC=$CC
+  lt_save_LD=$LD
+  lt_save_GCC=$GCC
+  GCC=$GXX
+  lt_save_with_gnu_ld=$with_gnu_ld
+  lt_save_path_LD=$lt_cv_path_LD
+  if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then
+    lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx
+  else
+    $as_unset lt_cv_prog_gnu_ld
+  fi
+  if test -n "${lt_cv_path_LDCXX+set}"; then
+    lt_cv_path_LD=$lt_cv_path_LDCXX
+  else
+    $as_unset lt_cv_path_LD
+  fi
+  test -z "${LDCXX+set}" || LD=$LDCXX
+  CC=${CXX-"c++"}
+  compiler=$CC
+  compiler_CXX=$CC
+  for cc_temp in $compiler""; do
   case $cc_temp in
     compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
     distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
@@ -18598,3123 +12916,2744 @@
     *) break;;
   esac
 done
-cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
+cc_basename=`$ECHO "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
 
-LD_GCJ="$LD"
 
-# GCJ did not exist at the time GCC didn't implicitly link libc in.
-archive_cmds_need_lc_GCJ=no
-
-old_archive_cmds_GCJ=$old_archive_cmds
+  if test -n "$compiler"; then
+    # We don't want -fno-exception when compiling C++ code, so set the
+    # no_builtin_flag separately
+    if test "$GXX" = yes; then
+      lt_prog_compiler_no_builtin_flag_CXX=' -fno-builtin'
+    else
+      lt_prog_compiler_no_builtin_flag_CXX=
+    fi
 
+    if test "$GXX" = yes; then
+      # Set up default GNU C++ configuration
 
-lt_prog_compiler_no_builtin_flag_GCJ=
 
-if test "$GCC" = yes; then
-  lt_prog_compiler_no_builtin_flag_GCJ=' -fno-builtin'
 
+# Check whether --with-gnu-ld was given.
+if test "${with_gnu_ld+set}" = set; then :
+  withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes
+else
+  with_gnu_ld=no
+fi
 
-{ $as_echo "$as_me:$LINENO: checking if $compiler supports -fno-rtti -fno-exceptions" >&5
-$as_echo_n "checking if $compiler supports -fno-rtti -fno-exceptions... " >&6; }
-if test "${lt_cv_prog_compiler_rtti_exceptions+set}" = set; then
+ac_prog=ld
+if test "$GCC" = yes; then
+  # Check if gcc -print-prog-name=ld gives a path.
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ld used by $CC" >&5
+$as_echo_n "checking for ld used by $CC... " >&6; }
+  case $host in
+  *-*-mingw*)
+    # gcc leaves a trailing carriage return which upsets mingw
+    ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
+  *)
+    ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
+  esac
+  case $ac_prog in
+    # Accept absolute paths.
+    [\\/]* | ?:[\\/]*)
+      re_direlt='/[^/][^/]*/\.\./'
+      # Canonicalize the pathname of ld
+      ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'`
+      while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do
+	ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"`
+      done
+      test -z "$LD" && LD="$ac_prog"
+      ;;
+  "")
+    # If it fails, then pretend we aren't using GCC.
+    ac_prog=ld
+    ;;
+  *)
+    # If it is relative, then search for the first ld in PATH.
+    with_gnu_ld=unknown
+    ;;
+  esac
+elif test "$with_gnu_ld" = yes; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU ld" >&5
+$as_echo_n "checking for GNU ld... " >&6; }
+else
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking for non-GNU ld" >&5
+$as_echo_n "checking for non-GNU ld... " >&6; }
+fi
+if test "${lt_cv_path_LD+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
-  lt_cv_prog_compiler_rtti_exceptions=no
-  ac_outfile=conftest.$ac_objext
-   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
-   lt_compiler_flag="-fno-rtti -fno-exceptions"
-   # Insert the option either (1) after the last *FLAGS variable, or
-   # (2) before a word containing "conftest.", or (3) at the end.
-   # Note that $ac_compile itself does not contain backslashes and begins
-   # with a dollar sign (not a hyphen), so the echo should work correctly.
-   # The option is referenced via a variable to avoid confusing sed.
-   lt_compile=`echo "$ac_compile" | $SED \
-   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-   -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:18635: $lt_compile\"" >&5)
-   (eval "$lt_compile" 2>conftest.err)
-   ac_status=$?
-   cat conftest.err >&5
-   echo "$as_me:18639: \$? = $ac_status" >&5
-   if (exit $ac_status) && test -s "$ac_outfile"; then
-     # The compiler can only warn and ignore the option if not recognized
-     # So say no if there are warnings other than the usual output.
-     $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
-     $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
-     if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
-       lt_cv_prog_compiler_rtti_exceptions=yes
-     fi
-   fi
-   $rm conftest*
-
+  if test -z "$LD"; then
+  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+  for ac_dir in $PATH; do
+    IFS="$lt_save_ifs"
+    test -z "$ac_dir" && ac_dir=.
+    if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
+      lt_cv_path_LD="$ac_dir/$ac_prog"
+      # Check to see if the program is GNU ld.  I'd rather use --version,
+      # but apparently some variants of GNU ld only accept -v.
+      # Break only if it was the GNU/non-GNU ld that we prefer.
+      case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
+      *GNU* | *'with BFD'*)
+	test "$with_gnu_ld" != no && break
+	;;
+      *)
+	test "$with_gnu_ld" != yes && break
+	;;
+      esac
+    fi
+  done
+  IFS="$lt_save_ifs"
+else
+  lt_cv_path_LD="$LD" # Let the user override the test with a path.
+fi
 fi
-{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_rtti_exceptions" >&5
-$as_echo "$lt_cv_prog_compiler_rtti_exceptions" >&6; }
 
-if test x"$lt_cv_prog_compiler_rtti_exceptions" = xyes; then
-    lt_prog_compiler_no_builtin_flag_GCJ="$lt_prog_compiler_no_builtin_flag_GCJ -fno-rtti -fno-exceptions"
+LD="$lt_cv_path_LD"
+if test -n "$LD"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LD" >&5
+$as_echo "$LD" >&6; }
 else
-    :
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
 fi
-
+test -z "$LD" && as_fn_error "no acceptable ld found in \$PATH" "$LINENO" 5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if the linker ($LD) is GNU ld" >&5
+$as_echo_n "checking if the linker ($LD) is GNU ld... " >&6; }
+if test "${lt_cv_prog_gnu_ld+set}" = set; then :
+  $as_echo_n "(cached) " >&6
+else
+  # I'd rather use --version here, but apparently some GNU lds only accept -v.
+case `$LD -v 2>&1 </dev/null` in
+*GNU* | *'with BFD'*)
+  lt_cv_prog_gnu_ld=yes
+  ;;
+*)
+  lt_cv_prog_gnu_ld=no
+  ;;
+esac
 fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_gnu_ld" >&5
+$as_echo "$lt_cv_prog_gnu_ld" >&6; }
+with_gnu_ld=$lt_cv_prog_gnu_ld
 
-lt_prog_compiler_wl_GCJ=
-lt_prog_compiler_pic_GCJ=
-lt_prog_compiler_static_GCJ=
 
-{ $as_echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5
-$as_echo_n "checking for $compiler option to produce PIC... " >&6; }
 
-  if test "$GCC" = yes; then
-    lt_prog_compiler_wl_GCJ='-Wl,'
-    lt_prog_compiler_static_GCJ='-static'
 
-    case $host_os in
-      aix*)
-      # All AIX code is PIC.
-      if test "$host_cpu" = ia64; then
-	# AIX 5 now supports IA64 processor
-	lt_prog_compiler_static_GCJ='-Bstatic'
-      fi
-      ;;
 
-    amigaos*)
-      # FIXME: we need at least 68020 code to build shared libraries, but
-      # adding the `-m68020' flag to GCC prevents building anything better,
-      # like `-m68040'.
-      lt_prog_compiler_pic_GCJ='-m68020 -resident32 -malways-restore-a4'
-      ;;
 
-    beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
-      # PIC is the default for these OSes.
-      ;;
 
-    mingw* | cygwin* | pw32* | os2*)
-      # This hack is so that the source file can tell whether it is being
-      # built for inclusion in a dll (and should export symbols for example).
-      # Although the cygwin gcc ignores -fPIC, still need this for old-style
-      # (--disable-auto-import) libraries
+      # Check if GNU C++ uses GNU ld as the underlying linker, since the
+      # archiving commands below assume that GNU ld is being used.
+      if test "$with_gnu_ld" = yes; then
+        archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
+        archive_expsym_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+
+        hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir'
+        export_dynamic_flag_spec_CXX='${wl}--export-dynamic'
+
+        # If archive_cmds runs LD, not CC, wlarc should be empty
+        # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to
+        #     investigate it a little bit more. (MM)
+        wlarc='${wl}'
+
+        # ancient GNU ld didn't support --whole-archive et. al.
+        if eval "`$CC -print-prog-name=ld` --help 2>&1" |
+	  $GREP 'no-whole-archive' > /dev/null; then
+          whole_archive_flag_spec_CXX="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+        else
+          whole_archive_flag_spec_CXX=
+        fi
+      else
+        with_gnu_ld=no
+        wlarc=
 
-      ;;
+        # A generic and very simple default shared library creation
+        # command for GNU C++ for the case where it uses the native
+        # linker, instead of GNU ld.  If possible, this setting should
+        # overridden to take advantage of the native linker features on
+        # the platform it is being used on.
+        archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
+      fi
 
-    darwin* | rhapsody*)
-      # PIC is the default on this platform
-      # Common symbols not allowed in MH_DYLIB files
-      lt_prog_compiler_pic_GCJ='-fno-common'
-      ;;
+      # Commands to make compiler produce verbose output that lists
+      # what "hidden" libraries, object files and flags are used when
+      # linking a shared library.
+      output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"'
 
-    interix[3-9]*)
-      # Interix 3.x gcc -fpic/-fPIC options generate broken code.
-      # Instead, we relocate shared libraries at runtime.
-      ;;
+    else
+      GXX=no
+      with_gnu_ld=no
+      wlarc=
+    fi
 
-    msdosdjgpp*)
-      # Just because we use GCC doesn't mean we suddenly get shared libraries
-      # on systems that don't support them.
-      lt_prog_compiler_can_build_shared_GCJ=no
-      enable_shared=no
-      ;;
+    # PORTME: fill in a description of your system's C++ link characteristics
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $compiler linker ($LD) supports shared libraries" >&5
+$as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; }
+    ld_shlibs_CXX=yes
+    case $host_os in
+      aix3*)
+        # FIXME: insert proper C++ library support
+        ld_shlibs_CXX=no
+        ;;
+      aix[4-9]*)
+        if test "$host_cpu" = ia64; then
+          # On IA64, the linker does run time linking by default, so we don't
+          # have to do anything special.
+          aix_use_runtimelinking=no
+          exp_sym_flag='-Bexport'
+          no_entry_flag=""
+        else
+          aix_use_runtimelinking=no
 
-    sysv4*MP*)
-      if test -d /usr/nec; then
-	lt_prog_compiler_pic_GCJ=-Kconform_pic
-      fi
-      ;;
+          # Test if we are trying to use run time linking or normal
+          # AIX style linking. If -brtl is somewhere in LDFLAGS, we
+          # need to do runtime linking.
+          case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*)
+	    for ld_flag in $LDFLAGS; do
+	      case $ld_flag in
+	      *-brtl*)
+	        aix_use_runtimelinking=yes
+	        break
+	        ;;
+	      esac
+	    done
+	    ;;
+          esac
 
-    hpux*)
-      # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
-      # not for PA HP-UX.
-      case $host_cpu in
-      hppa*64*|ia64*)
-	# +Z the default
-	;;
-      *)
-	lt_prog_compiler_pic_GCJ='-fPIC'
-	;;
-      esac
-      ;;
+          exp_sym_flag='-bexport'
+          no_entry_flag='-bnoentry'
+        fi
 
-    *)
-      lt_prog_compiler_pic_GCJ='-fPIC'
-      ;;
-    esac
-  else
-    # PORTME Check for flag to pass linker flags through the system compiler.
-    case $host_os in
-    aix*)
-      lt_prog_compiler_wl_GCJ='-Wl,'
-      if test "$host_cpu" = ia64; then
-	# AIX 5 now supports IA64 processor
-	lt_prog_compiler_static_GCJ='-Bstatic'
-      else
-	lt_prog_compiler_static_GCJ='-bnso -bI:/lib/syscalls.exp'
-      fi
-      ;;
-      darwin*)
-        # PIC is the default on this platform
-        # Common symbols not allowed in MH_DYLIB files
-       case $cc_basename in
-         xlc*)
-         lt_prog_compiler_pic_GCJ='-qnocommon'
-         lt_prog_compiler_wl_GCJ='-Wl,'
-         ;;
-       esac
-       ;;
+        # When large executables or shared objects are built, AIX ld can
+        # have problems creating the table of contents.  If linking a library
+        # or program results in "error TOC overflow" add -mminimal-toc to
+        # CXXFLAGS/CFLAGS for g++/gcc.  In the cases where that is not
+        # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
+
+        archive_cmds_CXX=''
+        hardcode_direct_CXX=yes
+        hardcode_direct_absolute_CXX=yes
+        hardcode_libdir_separator_CXX=':'
+        link_all_deplibs_CXX=yes
+        file_list_spec_CXX='${wl}-f,'
+
+        if test "$GXX" = yes; then
+          case $host_os in aix4.[012]|aix4.[012].*)
+          # We only want to do this on AIX 4.2 and lower, the check
+          # below for broken collect2 doesn't work under 4.3+
+	  collect2name=`${CC} -print-prog-name=collect2`
+	  if test -f "$collect2name" &&
+	     strings "$collect2name" | $GREP resolve_lib_name >/dev/null
+	  then
+	    # We have reworked collect2
+	    :
+	  else
+	    # We have old collect2
+	    hardcode_direct_CXX=unsupported
+	    # It fails to find uninstalled libraries when the uninstalled
+	    # path is not listed in the libpath.  Setting hardcode_minus_L
+	    # to unsupported forces relinking
+	    hardcode_minus_L_CXX=yes
+	    hardcode_libdir_flag_spec_CXX='-L$libdir'
+	    hardcode_libdir_separator_CXX=
+	  fi
+          esac
+          shared_flag='-shared'
+	  if test "$aix_use_runtimelinking" = yes; then
+	    shared_flag="$shared_flag "'${wl}-G'
+	  fi
+        else
+          # not using gcc
+          if test "$host_cpu" = ia64; then
+	  # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
+	  # chokes on -Wl,-G. The following line is correct:
+	  shared_flag='-G'
+          else
+	    if test "$aix_use_runtimelinking" = yes; then
+	      shared_flag='${wl}-G'
+	    else
+	      shared_flag='${wl}-bM:SRE'
+	    fi
+          fi
+        fi
 
-    mingw* | cygwin* | pw32* | os2*)
-      # This hack is so that the source file can tell whether it is being
-      # built for inclusion in a dll (and should export symbols for example).
+        export_dynamic_flag_spec_CXX='${wl}-bexpall'
+        # It seems that -bexpall does not export symbols beginning with
+        # underscore (_), so it is better to generate a list of symbols to
+	# export.
+        always_export_symbols_CXX=yes
+        if test "$aix_use_runtimelinking" = yes; then
+          # Warning - without using the other runtime loading flags (-brtl),
+          # -berok will link without error, but may produce a broken library.
+          allow_undefined_flag_CXX='-berok'
+          # Determine the default libpath from the value encoded in an empty
+          # executable.
+          cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
 
-      ;;
+int
+main ()
+{
 
-    hpux9* | hpux10* | hpux11*)
-      lt_prog_compiler_wl_GCJ='-Wl,'
-      # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
-      # not for PA HP-UX.
-      case $host_cpu in
-      hppa*64*|ia64*)
-	# +Z the default
-	;;
-      *)
-	lt_prog_compiler_pic_GCJ='+Z'
-	;;
-      esac
-      # Is there a better lt_prog_compiler_static that works with the bundled CC?
-      lt_prog_compiler_static_GCJ='${wl}-a ${wl}archive'
-      ;;
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_cxx_try_link "$LINENO"; then :
 
-    irix5* | irix6* | nonstopux*)
-      lt_prog_compiler_wl_GCJ='-Wl,'
-      # PIC (with -KPIC) is the default.
-      lt_prog_compiler_static_GCJ='-non_shared'
-      ;;
+lt_aix_libpath_sed='
+    /Import File Strings/,/^$/ {
+	/^0/ {
+	    s/^0  *\(.*\)$/\1/
+	    p
+	}
+    }'
+aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+# Check for a 64-bit object if we didn't find anything.
+if test -z "$aix_libpath"; then
+  aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+fi
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
 
-    newsos6)
-      lt_prog_compiler_pic_GCJ='-KPIC'
-      lt_prog_compiler_static_GCJ='-Bstatic'
-      ;;
+          hardcode_libdir_flag_spec_CXX='${wl}-blibpath:$libdir:'"$aix_libpath"
 
-    linux* | k*bsd*-gnu)
-      case $cc_basename in
-      icc* | ecc*)
-	lt_prog_compiler_wl_GCJ='-Wl,'
-	lt_prog_compiler_pic_GCJ='-KPIC'
-	lt_prog_compiler_static_GCJ='-static'
-        ;;
-      pgcc* | pgf77* | pgf90* | pgf95*)
-        # Portland Group compilers (*not* the Pentium gcc compiler,
-	# which looks to be a dead project)
-	lt_prog_compiler_wl_GCJ='-Wl,'
-	lt_prog_compiler_pic_GCJ='-fpic'
-	lt_prog_compiler_static_GCJ='-Bstatic'
-        ;;
-      ccc*)
-        lt_prog_compiler_wl_GCJ='-Wl,'
-        # All Alpha code is PIC.
-        lt_prog_compiler_static_GCJ='-non_shared'
-        ;;
-      *)
-        case `$CC -V 2>&1 | sed 5q` in
-	*Sun\ C*)
-	  # Sun C 5.9
-	  lt_prog_compiler_pic_GCJ='-KPIC'
-	  lt_prog_compiler_static_GCJ='-Bstatic'
-	  lt_prog_compiler_wl_GCJ='-Wl,'
-	  ;;
-	*Sun\ F*)
-	  # Sun Fortran 8.3 passes all unrecognized flags to the linker
-	  lt_prog_compiler_pic_GCJ='-KPIC'
-	  lt_prog_compiler_static_GCJ='-Bstatic'
-	  lt_prog_compiler_wl_GCJ=''
-	  ;;
-	esac
-	;;
-      esac
-      ;;
+          archive_expsym_cmds_CXX='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then $ECHO "X${wl}${allow_undefined_flag}" | $Xsed; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+        else
+          if test "$host_cpu" = ia64; then
+	    hardcode_libdir_flag_spec_CXX='${wl}-R $libdir:/usr/lib:/lib'
+	    allow_undefined_flag_CXX="-z nodefs"
+	    archive_expsym_cmds_CXX="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
+          else
+	    # Determine the default libpath from the value encoded in an
+	    # empty executable.
+	    cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
 
-    osf3* | osf4* | osf5*)
-      lt_prog_compiler_wl_GCJ='-Wl,'
-      # All OSF/1 code is PIC.
-      lt_prog_compiler_static_GCJ='-non_shared'
-      ;;
+int
+main ()
+{
 
-    rdos*)
-      lt_prog_compiler_static_GCJ='-non_shared'
-      ;;
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_cxx_try_link "$LINENO"; then :
 
-    solaris*)
-      lt_prog_compiler_pic_GCJ='-KPIC'
-      lt_prog_compiler_static_GCJ='-Bstatic'
-      case $cc_basename in
-      f77* | f90* | f95*)
-	lt_prog_compiler_wl_GCJ='-Qoption ld ';;
-      *)
-	lt_prog_compiler_wl_GCJ='-Wl,';;
-      esac
-      ;;
+lt_aix_libpath_sed='
+    /Import File Strings/,/^$/ {
+	/^0/ {
+	    s/^0  *\(.*\)$/\1/
+	    p
+	}
+    }'
+aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+# Check for a 64-bit object if we didn't find anything.
+if test -z "$aix_libpath"; then
+  aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+fi
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
 
-    sunos4*)
-      lt_prog_compiler_wl_GCJ='-Qoption ld '
-      lt_prog_compiler_pic_GCJ='-PIC'
-      lt_prog_compiler_static_GCJ='-Bstatic'
-      ;;
+	    hardcode_libdir_flag_spec_CXX='${wl}-blibpath:$libdir:'"$aix_libpath"
+	    # Warning - without using the other run time loading flags,
+	    # -berok will link without error, but may produce a broken library.
+	    no_undefined_flag_CXX=' ${wl}-bernotok'
+	    allow_undefined_flag_CXX=' ${wl}-berok'
+	    # Exported symbols can be pulled into shared objects from archives
+	    whole_archive_flag_spec_CXX='$convenience'
+	    archive_cmds_need_lc_CXX=yes
+	    # This is similar to how AIX traditionally builds its shared
+	    # libraries.
+	    archive_expsym_cmds_CXX="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
+          fi
+        fi
+        ;;
 
-    sysv4 | sysv4.2uw2* | sysv4.3*)
-      lt_prog_compiler_wl_GCJ='-Wl,'
-      lt_prog_compiler_pic_GCJ='-KPIC'
-      lt_prog_compiler_static_GCJ='-Bstatic'
-      ;;
+      beos*)
+	if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+	  allow_undefined_flag_CXX=unsupported
+	  # Joseph Beckenbach <jrb3@best.com> says some releases of gcc
+	  # support --undefined.  This deserves some investigation.  FIXME
+	  archive_cmds_CXX='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	else
+	  ld_shlibs_CXX=no
+	fi
+	;;
 
-    sysv4*MP*)
-      if test -d /usr/nec ;then
-	lt_prog_compiler_pic_GCJ='-Kconform_pic'
-	lt_prog_compiler_static_GCJ='-Bstatic'
-      fi
-      ;;
+      chorus*)
+        case $cc_basename in
+          *)
+	  # FIXME: insert proper C++ library support
+	  ld_shlibs_CXX=no
+	  ;;
+        esac
+        ;;
 
-    sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
-      lt_prog_compiler_wl_GCJ='-Wl,'
-      lt_prog_compiler_pic_GCJ='-KPIC'
-      lt_prog_compiler_static_GCJ='-Bstatic'
-      ;;
+      cygwin* | mingw* | pw32* | cegcc*)
+        # _LT_TAGVAR(hardcode_libdir_flag_spec, CXX) is actually meaningless,
+        # as there is no search path for DLLs.
+        hardcode_libdir_flag_spec_CXX='-L$libdir'
+        allow_undefined_flag_CXX=unsupported
+        always_export_symbols_CXX=no
+        enable_shared_with_static_runtimes_CXX=yes
+
+        if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
+          archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+          # If the export-symbols file already is a .def file (1st line
+          # is EXPORTS), use it as is; otherwise, prepend...
+          archive_expsym_cmds_CXX='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
+	    cp $export_symbols $output_objdir/$soname.def;
+          else
+	    echo EXPORTS > $output_objdir/$soname.def;
+	    cat $export_symbols >> $output_objdir/$soname.def;
+          fi~
+          $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+        else
+          ld_shlibs_CXX=no
+        fi
+        ;;
+      darwin* | rhapsody*)
 
-    unicos*)
-      lt_prog_compiler_wl_GCJ='-Wl,'
-      lt_prog_compiler_can_build_shared_GCJ=no
-      ;;
 
-    uts4*)
-      lt_prog_compiler_pic_GCJ='-pic'
-      lt_prog_compiler_static_GCJ='-Bstatic'
-      ;;
+  archive_cmds_need_lc_CXX=no
+  hardcode_direct_CXX=no
+  hardcode_automatic_CXX=yes
+  hardcode_shlibpath_var_CXX=unsupported
+  whole_archive_flag_spec_CXX=''
+  link_all_deplibs_CXX=yes
+  allow_undefined_flag_CXX="$_lt_dar_allow_undefined"
+  case $cc_basename in
+     ifort*) _lt_dar_can_shared=yes ;;
+     *) _lt_dar_can_shared=$GCC ;;
+  esac
+  if test "$_lt_dar_can_shared" = "yes"; then
+    output_verbose_link_cmd=echo
+    archive_cmds_CXX="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}"
+    module_cmds_CXX="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}"
+    archive_expsym_cmds_CXX="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}"
+    module_expsym_cmds_CXX="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}"
+       if test "$lt_cv_apple_cc_single_mod" != "yes"; then
+      archive_cmds_CXX="\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dsymutil}"
+      archive_expsym_cmds_CXX="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dar_export_syms}${_lt_dsymutil}"
+    fi
 
-    *)
-      lt_prog_compiler_can_build_shared_GCJ=no
-      ;;
-    esac
+  else
+  ld_shlibs_CXX=no
   fi
 
-{ $as_echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_GCJ" >&5
-$as_echo "$lt_prog_compiler_pic_GCJ" >&6; }
-
-#
-# Check to make sure the PIC flag actually works.
-#
-if test -n "$lt_prog_compiler_pic_GCJ"; then
-
-{ $as_echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic_GCJ works" >&5
-$as_echo_n "checking if $compiler PIC flag $lt_prog_compiler_pic_GCJ works... " >&6; }
-if test "${lt_cv_prog_compiler_pic_works_GCJ+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
-  lt_cv_prog_compiler_pic_works_GCJ=no
-  ac_outfile=conftest.$ac_objext
-   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
-   lt_compiler_flag="$lt_prog_compiler_pic_GCJ"
-   # Insert the option either (1) after the last *FLAGS variable, or
-   # (2) before a word containing "conftest.", or (3) at the end.
-   # Note that $ac_compile itself does not contain backslashes and begins
-   # with a dollar sign (not a hyphen), so the echo should work correctly.
-   # The option is referenced via a variable to avoid confusing sed.
-   lt_compile=`echo "$ac_compile" | $SED \
-   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-   -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:18925: $lt_compile\"" >&5)
-   (eval "$lt_compile" 2>conftest.err)
-   ac_status=$?
-   cat conftest.err >&5
-   echo "$as_me:18929: \$? = $ac_status" >&5
-   if (exit $ac_status) && test -s "$ac_outfile"; then
-     # The compiler can only warn and ignore the option if not recognized
-     # So say no if there are warnings other than the usual output.
-     $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
-     $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
-     if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
-       lt_cv_prog_compiler_pic_works_GCJ=yes
-     fi
-   fi
-   $rm conftest*
+	;;
 
-fi
-{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_pic_works_GCJ" >&5
-$as_echo "$lt_cv_prog_compiler_pic_works_GCJ" >&6; }
+      dgux*)
+        case $cc_basename in
+          ec++*)
+	    # FIXME: insert proper C++ library support
+	    ld_shlibs_CXX=no
+	    ;;
+          ghcx*)
+	    # Green Hills C++ Compiler
+	    # FIXME: insert proper C++ library support
+	    ld_shlibs_CXX=no
+	    ;;
+          *)
+	    # FIXME: insert proper C++ library support
+	    ld_shlibs_CXX=no
+	    ;;
+        esac
+        ;;
 
-if test x"$lt_cv_prog_compiler_pic_works_GCJ" = xyes; then
-    case $lt_prog_compiler_pic_GCJ in
-     "" | " "*) ;;
-     *) lt_prog_compiler_pic_GCJ=" $lt_prog_compiler_pic_GCJ" ;;
-     esac
-else
-    lt_prog_compiler_pic_GCJ=
-     lt_prog_compiler_can_build_shared_GCJ=no
-fi
+      freebsd[12]*)
+        # C++ shared libraries reported to be fairly broken before
+	# switch to ELF
+        ld_shlibs_CXX=no
+        ;;
 
-fi
-case $host_os in
-  # For platforms which do not support PIC, -DPIC is meaningless:
-  *djgpp*)
-    lt_prog_compiler_pic_GCJ=
-    ;;
-  *)
-    lt_prog_compiler_pic_GCJ="$lt_prog_compiler_pic_GCJ"
-    ;;
-esac
+      freebsd-elf*)
+        archive_cmds_need_lc_CXX=no
+        ;;
 
-#
-# Check to make sure the static flag actually works.
-#
-wl=$lt_prog_compiler_wl_GCJ eval lt_tmp_static_flag=\"$lt_prog_compiler_static_GCJ\"
-{ $as_echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5
-$as_echo_n "checking if $compiler static flag $lt_tmp_static_flag works... " >&6; }
-if test "${lt_cv_prog_compiler_static_works_GCJ+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
-  lt_cv_prog_compiler_static_works_GCJ=no
-   save_LDFLAGS="$LDFLAGS"
-   LDFLAGS="$LDFLAGS $lt_tmp_static_flag"
-   echo "$lt_simple_link_test_code" > conftest.$ac_ext
-   if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
-     # The linker can only warn and ignore the option if not recognized
-     # So say no if there are warnings
-     if test -s conftest.err; then
-       # Append any errors to the config.log.
-       cat conftest.err 1>&5
-       $echo "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp
-       $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
-       if diff conftest.exp conftest.er2 >/dev/null; then
-         lt_cv_prog_compiler_static_works_GCJ=yes
-       fi
-     else
-       lt_cv_prog_compiler_static_works_GCJ=yes
-     fi
-   fi
-   $rm -r conftest*
-   LDFLAGS="$save_LDFLAGS"
+      freebsd* | dragonfly*)
+        # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF
+        # conventions
+        ld_shlibs_CXX=yes
+        ;;
 
-fi
-{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_static_works_GCJ" >&5
-$as_echo "$lt_cv_prog_compiler_static_works_GCJ" >&6; }
+      gnu*)
+        ;;
 
-if test x"$lt_cv_prog_compiler_static_works_GCJ" = xyes; then
-    :
-else
-    lt_prog_compiler_static_GCJ=
-fi
+      hpux9*)
+        hardcode_libdir_flag_spec_CXX='${wl}+b ${wl}$libdir'
+        hardcode_libdir_separator_CXX=:
+        export_dynamic_flag_spec_CXX='${wl}-E'
+        hardcode_direct_CXX=yes
+        hardcode_minus_L_CXX=yes # Not in the search PATH,
+				             # but as the default
+				             # location of the library.
+
+        case $cc_basename in
+          CC*)
+            # FIXME: insert proper C++ library support
+            ld_shlibs_CXX=no
+            ;;
+          aCC*)
+            archive_cmds_CXX='$RM $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+            # Commands to make compiler produce verbose output that lists
+            # what "hidden" libraries, object files and flags are used when
+            # linking a shared library.
+            #
+            # There doesn't appear to be a way to prevent this compiler from
+            # explicitly linking system object files so we need to strip them
+            # from the output so that they don't get included in the library
+            # dependencies.
+            output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $EGREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed'
+            ;;
+          *)
+            if test "$GXX" = yes; then
+              archive_cmds_CXX='$RM $output_objdir/$soname~$CC -shared -nostdlib -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+            else
+              # FIXME: insert proper C++ library support
+              ld_shlibs_CXX=no
+            fi
+            ;;
+        esac
+        ;;
 
+      hpux10*|hpux11*)
+        if test $with_gnu_ld = no; then
+	  hardcode_libdir_flag_spec_CXX='${wl}+b ${wl}$libdir'
+	  hardcode_libdir_separator_CXX=:
 
-{ $as_echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5
-$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; }
-if test "${lt_cv_prog_compiler_c_o_GCJ+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
-  lt_cv_prog_compiler_c_o_GCJ=no
-   $rm -r conftest 2>/dev/null
-   mkdir conftest
-   cd conftest
-   mkdir out
-   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+          case $host_cpu in
+            hppa*64*|ia64*)
+              ;;
+            *)
+	      export_dynamic_flag_spec_CXX='${wl}-E'
+              ;;
+          esac
+        fi
+        case $host_cpu in
+          hppa*64*|ia64*)
+            hardcode_direct_CXX=no
+            hardcode_shlibpath_var_CXX=no
+            ;;
+          *)
+            hardcode_direct_CXX=yes
+            hardcode_direct_absolute_CXX=yes
+            hardcode_minus_L_CXX=yes # Not in the search PATH,
+					         # but as the default
+					         # location of the library.
+            ;;
+        esac
+
+        case $cc_basename in
+          CC*)
+	    # FIXME: insert proper C++ library support
+	    ld_shlibs_CXX=no
+	    ;;
+          aCC*)
+	    case $host_cpu in
+	      hppa*64*)
+	        archive_cmds_CXX='$CC -b ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	        ;;
+	      ia64*)
+	        archive_cmds_CXX='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	        ;;
+	      *)
+	        archive_cmds_CXX='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	        ;;
+	    esac
+	    # Commands to make compiler produce verbose output that lists
+	    # what "hidden" libraries, object files and flags are used when
+	    # linking a shared library.
+	    #
+	    # There doesn't appear to be a way to prevent this compiler from
+	    # explicitly linking system object files so we need to strip them
+	    # from the output so that they don't get included in the library
+	    # dependencies.
+	    output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $GREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed'
+	    ;;
+          *)
+	    if test "$GXX" = yes; then
+	      if test $with_gnu_ld = no; then
+	        case $host_cpu in
+	          hppa*64*)
+	            archive_cmds_CXX='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	            ;;
+	          ia64*)
+	            archive_cmds_CXX='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	            ;;
+	          *)
+	            archive_cmds_CXX='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	            ;;
+	        esac
+	      fi
+	    else
+	      # FIXME: insert proper C++ library support
+	      ld_shlibs_CXX=no
+	    fi
+	    ;;
+        esac
+        ;;
 
-   lt_compiler_flag="-o out/conftest2.$ac_objext"
-   # Insert the option either (1) after the last *FLAGS variable, or
-   # (2) before a word containing "conftest.", or (3) at the end.
-   # Note that $ac_compile itself does not contain backslashes and begins
-   # with a dollar sign (not a hyphen), so the echo should work correctly.
-   lt_compile=`echo "$ac_compile" | $SED \
-   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-   -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:19029: $lt_compile\"" >&5)
-   (eval "$lt_compile" 2>out/conftest.err)
-   ac_status=$?
-   cat out/conftest.err >&5
-   echo "$as_me:19033: \$? = $ac_status" >&5
-   if (exit $ac_status) && test -s out/conftest2.$ac_objext
-   then
-     # The compiler can only warn and ignore the option if not recognized
-     # So say no if there are warnings
-     $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
-     $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
-     if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
-       lt_cv_prog_compiler_c_o_GCJ=yes
-     fi
-   fi
-   chmod u+w . 2>&5
-   $rm conftest*
-   # SGI C++ compiler will create directory out/ii_files/ for
-   # template instantiation
-   test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files
-   $rm out/* && rmdir out
-   cd ..
-   rmdir conftest
-   $rm conftest*
+      interix[3-9]*)
+	hardcode_direct_CXX=no
+	hardcode_shlibpath_var_CXX=no
+	hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir'
+	export_dynamic_flag_spec_CXX='${wl}-E'
+	# Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
+	# Instead, shared libraries are loaded at an image base (0x10000000 by
+	# default) and relocated if they conflict, which is a slow very memory
+	# consuming and fragmenting process.  To avoid this, we pick a random,
+	# 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
+	# time.  Moving up from 0x10000000 also allows more sbrk(2) space.
+	archive_cmds_CXX='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+	archive_expsym_cmds_CXX='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+	;;
+      irix5* | irix6*)
+        case $cc_basename in
+          CC*)
+	    # SGI C++
+	    archive_cmds_CXX='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
+
+	    # Archives containing C++ object files must be created using
+	    # "CC -ar", where "CC" is the IRIX C++ compiler.  This is
+	    # necessary to make sure instantiated templates are included
+	    # in the archive.
+	    old_archive_cmds_CXX='$CC -ar -WR,-u -o $oldlib $oldobjs'
+	    ;;
+          *)
+	    if test "$GXX" = yes; then
+	      if test "$with_gnu_ld" = no; then
+	        archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+	      else
+	        archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` -o $lib'
+	      fi
+	    fi
+	    link_all_deplibs_CXX=yes
+	    ;;
+        esac
+        hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir'
+        hardcode_libdir_separator_CXX=:
+        inherit_rpath_CXX=yes
+        ;;
 
-fi
-{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o_GCJ" >&5
-$as_echo "$lt_cv_prog_compiler_c_o_GCJ" >&6; }
+      linux* | k*bsd*-gnu)
+        case $cc_basename in
+          KCC*)
+	    # Kuck and Associates, Inc. (KAI) C++ Compiler
+
+	    # KCC will only create a shared library if the output file
+	    # ends with ".so" (or ".sl" for HP-UX), so rename the library
+	    # to its proper name (with version) after linking.
+	    archive_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
+	    archive_expsym_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib'
+	    # Commands to make compiler produce verbose output that lists
+	    # what "hidden" libraries, object files and flags are used when
+	    # linking a shared library.
+	    #
+	    # There doesn't appear to be a way to prevent this compiler from
+	    # explicitly linking system object files so we need to strip them
+	    # from the output so that they don't get included in the library
+	    # dependencies.
+	    output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | $GREP "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed'
+
+	    hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir'
+	    export_dynamic_flag_spec_CXX='${wl}--export-dynamic'
+
+	    # Archives containing C++ object files must be created using
+	    # "CC -Bstatic", where "CC" is the KAI C++ compiler.
+	    old_archive_cmds_CXX='$CC -Bstatic -o $oldlib $oldobjs'
+	    ;;
+	  icpc* | ecpc* )
+	    # Intel C++
+	    with_gnu_ld=yes
+	    # version 8.0 and above of icpc choke on multiply defined symbols
+	    # if we add $predep_objects and $postdep_objects, however 7.1 and
+	    # earlier do not add the objects themselves.
+	    case `$CC -V 2>&1` in
+	      *"Version 7."*)
+	        archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
+		archive_expsym_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+		;;
+	      *)  # Version 8.0 or newer
+	        tmp_idyn=
+	        case $host_cpu in
+		  ia64*) tmp_idyn=' -i_dynamic';;
+		esac
+	        archive_cmds_CXX='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+		archive_expsym_cmds_CXX='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+		;;
+	    esac
+	    archive_cmds_need_lc_CXX=no
+	    hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir'
+	    export_dynamic_flag_spec_CXX='${wl}--export-dynamic'
+	    whole_archive_flag_spec_CXX='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
+	    ;;
+          pgCC* | pgcpp*)
+            # Portland Group C++ compiler
+	    case `$CC -V` in
+	    *pgCC\ [1-5]* | *pgcpp\ [1-5]*)
+	      prelink_cmds_CXX='tpldir=Template.dir~
+		rm -rf $tpldir~
+		$CC --prelink_objects --instantiation_dir $tpldir $objs $libobjs $compile_deplibs~
+		compile_command="$compile_command `find $tpldir -name \*.o | $NL2SP`"'
+	      old_archive_cmds_CXX='tpldir=Template.dir~
+		rm -rf $tpldir~
+		$CC --prelink_objects --instantiation_dir $tpldir $oldobjs$old_deplibs~
+		$AR $AR_FLAGS $oldlib$oldobjs$old_deplibs `find $tpldir -name \*.o | $NL2SP`~
+		$RANLIB $oldlib'
+	      archive_cmds_CXX='tpldir=Template.dir~
+		rm -rf $tpldir~
+		$CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~
+		$CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
+	      archive_expsym_cmds_CXX='tpldir=Template.dir~
+		rm -rf $tpldir~
+		$CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~
+		$CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
+	      ;;
+	    *) # Version 6 will use weak symbols
+	      archive_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
+	      archive_expsym_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
+	      ;;
+	    esac
 
+	    hardcode_libdir_flag_spec_CXX='${wl}--rpath ${wl}$libdir'
+	    export_dynamic_flag_spec_CXX='${wl}--export-dynamic'
+	    whole_archive_flag_spec_CXX='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
+            ;;
+	  cxx*)
+	    # Compaq C++
+	    archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	    archive_expsym_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname  -o $lib ${wl}-retain-symbols-file $wl$export_symbols'
 
-hard_links="nottested"
-if test "$lt_cv_prog_compiler_c_o_GCJ" = no && test "$need_locks" != no; then
-  # do not overwrite the value of need_locks provided by the user
-  { $as_echo "$as_me:$LINENO: checking if we can lock with hard links" >&5
-$as_echo_n "checking if we can lock with hard links... " >&6; }
-  hard_links=yes
-  $rm conftest*
-  ln conftest.a conftest.b 2>/dev/null && hard_links=no
-  touch conftest.a
-  ln conftest.a conftest.b 2>&5 || hard_links=no
-  ln conftest.a conftest.b 2>/dev/null && hard_links=no
-  { $as_echo "$as_me:$LINENO: result: $hard_links" >&5
-$as_echo "$hard_links" >&6; }
-  if test "$hard_links" = no; then
-    { $as_echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5
-$as_echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;}
-    need_locks=warn
-  fi
-else
-  need_locks=no
-fi
+	    runpath_var=LD_RUN_PATH
+	    hardcode_libdir_flag_spec_CXX='-rpath $libdir'
+	    hardcode_libdir_separator_CXX=:
 
-{ $as_echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5
-$as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; }
+	    # Commands to make compiler produce verbose output that lists
+	    # what "hidden" libraries, object files and flags are used when
+	    # linking a shared library.
+	    #
+	    # There doesn't appear to be a way to prevent this compiler from
+	    # explicitly linking system object files so we need to strip them
+	    # from the output so that they don't get included in the library
+	    # dependencies.
+	    output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld"`; templist=`$ECHO "X$templist" | $Xsed -e "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed'
+	    ;;
+	  xl*)
+	    # IBM XL 8.0 on PPC, with GNU ld
+	    hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir'
+	    export_dynamic_flag_spec_CXX='${wl}--export-dynamic'
+	    archive_cmds_CXX='$CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	    if test "x$supports_anon_versioning" = xyes; then
+	      archive_expsym_cmds_CXX='echo "{ global:" > $output_objdir/$libname.ver~
+		cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+		echo "local: *; };" >> $output_objdir/$libname.ver~
+		$CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
+	    fi
+	    ;;
+	  *)
+	    case `$CC -V 2>&1 | sed 5q` in
+	    *Sun\ C*)
+	      # Sun C++ 5.9
+	      no_undefined_flag_CXX=' -zdefs'
+	      archive_cmds_CXX='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	      archive_expsym_cmds_CXX='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file ${wl}$export_symbols'
+	      hardcode_libdir_flag_spec_CXX='-R$libdir'
+	      whole_archive_flag_spec_CXX='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
+	      compiler_needs_object_CXX=yes
+
+	      # Not sure whether something based on
+	      # $CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1
+	      # would be better.
+	      output_verbose_link_cmd='echo'
+
+	      # Archives containing C++ object files must be created using
+	      # "CC -xar", where "CC" is the Sun C++ compiler.  This is
+	      # necessary to make sure instantiated templates are included
+	      # in the archive.
+	      old_archive_cmds_CXX='$CC -xar -o $oldlib $oldobjs'
+	      ;;
+	    esac
+	    ;;
+	esac
+	;;
 
-  runpath_var=
-  allow_undefined_flag_GCJ=
-  enable_shared_with_static_runtimes_GCJ=no
-  archive_cmds_GCJ=
-  archive_expsym_cmds_GCJ=
-  old_archive_From_new_cmds_GCJ=
-  old_archive_from_expsyms_cmds_GCJ=
-  export_dynamic_flag_spec_GCJ=
-  whole_archive_flag_spec_GCJ=
-  thread_safe_flag_spec_GCJ=
-  hardcode_libdir_flag_spec_GCJ=
-  hardcode_libdir_flag_spec_ld_GCJ=
-  hardcode_libdir_separator_GCJ=
-  hardcode_direct_GCJ=no
-  hardcode_minus_L_GCJ=no
-  hardcode_shlibpath_var_GCJ=unsupported
-  link_all_deplibs_GCJ=unknown
-  hardcode_automatic_GCJ=no
-  module_cmds_GCJ=
-  module_expsym_cmds_GCJ=
-  always_export_symbols_GCJ=no
-  export_symbols_cmds_GCJ='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
-  # include_expsyms should be a list of space-separated symbols to be *always*
-  # included in the symbol list
-  include_expsyms_GCJ=
-  # exclude_expsyms can be an extended regexp of symbols to exclude
-  # it will be wrapped by ` (' and `)$', so one must not match beginning or
-  # end of line.  Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
-  # as well as any symbol that contains `d'.
-  exclude_expsyms_GCJ='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'
-  # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
-  # platforms (ab)use it in PIC code, but their linkers get confused if
-  # the symbol is explicitly referenced.  Since portable code cannot
-  # rely on this symbol name, it's probably fine to never include it in
-  # preloaded symbol tables.
-  # Exclude shared library initialization/finalization symbols.
-  extract_expsyms_cmds=
-  # Just being paranoid about ensuring that cc_basename is set.
-  for cc_temp in $compiler""; do
-  case $cc_temp in
-    compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
-    distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
-    \-*) ;;
-    *) break;;
-  esac
-done
-cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
+      lynxos*)
+        # FIXME: insert proper C++ library support
+	ld_shlibs_CXX=no
+	;;
 
-  case $host_os in
-  cygwin* | mingw* | pw32*)
-    # FIXME: the MSVC++ port hasn't been tested in a loooong time
-    # When not using gcc, we currently assume that we are using
-    # Microsoft Visual C++.
-    if test "$GCC" != yes; then
-      with_gnu_ld=no
-    fi
-    ;;
-  interix*)
-    # we just hope/assume this is gcc and not c89 (= MSVC++)
-    with_gnu_ld=yes
-    ;;
-  openbsd*)
-    with_gnu_ld=no
-    ;;
-  esac
+      m88k*)
+        # FIXME: insert proper C++ library support
+        ld_shlibs_CXX=no
+	;;
 
-  ld_shlibs_GCJ=yes
-  if test "$with_gnu_ld" = yes; then
-    # If archive_cmds runs LD, not CC, wlarc should be empty
-    wlarc='${wl}'
+      mvs*)
+        case $cc_basename in
+          cxx*)
+	    # FIXME: insert proper C++ library support
+	    ld_shlibs_CXX=no
+	    ;;
+	  *)
+	    # FIXME: insert proper C++ library support
+	    ld_shlibs_CXX=no
+	    ;;
+	esac
+	;;
 
-    # Set some defaults for GNU ld with shared library support. These
-    # are reset later if shared libraries are not supported. Putting them
-    # here allows them to be overridden if necessary.
-    runpath_var=LD_RUN_PATH
-    hardcode_libdir_flag_spec_GCJ='${wl}--rpath ${wl}$libdir'
-    export_dynamic_flag_spec_GCJ='${wl}--export-dynamic'
-    # ancient GNU ld didn't support --whole-archive et. al.
-    if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then
-	whole_archive_flag_spec_GCJ="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
-      else
-  	whole_archive_flag_spec_GCJ=
-    fi
-    supports_anon_versioning=no
-    case `$LD -v 2>/dev/null` in
-      *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11
-      *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
-      *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
-      *\ 2.11.*) ;; # other 2.11 versions
-      *) supports_anon_versioning=yes ;;
-    esac
+      netbsd*)
+        if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+	  archive_cmds_CXX='$LD -Bshareable  -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags'
+	  wlarc=
+	  hardcode_libdir_flag_spec_CXX='-R$libdir'
+	  hardcode_direct_CXX=yes
+	  hardcode_shlibpath_var_CXX=no
+	fi
+	# Workaround some broken pre-1.5 toolchains
+	output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"'
+	;;
 
-    # See if GNU ld supports shared libraries.
-    case $host_os in
-    aix[3-9]*)
-      # On AIX/PPC, the GNU linker is very broken
-      if test "$host_cpu" != ia64; then
-	ld_shlibs_GCJ=no
-	cat <<EOF 1>&2
+      *nto* | *qnx*)
+        ld_shlibs_CXX=yes
+	;;
 
-*** Warning: the GNU linker, at least up to release 2.9.1, is reported
-*** to be unable to reliably create shared libraries on AIX.
-*** Therefore, libtool is disabling shared libraries support.  If you
-*** really care for shared libraries, you may want to modify your PATH
-*** so that a non-GNU linker is found, and then restart.
+      openbsd2*)
+        # C++ shared libraries are fairly broken
+	ld_shlibs_CXX=no
+	;;
 
-EOF
-      fi
-      ;;
+      openbsd*)
+	if test -f /usr/libexec/ld.so; then
+	  hardcode_direct_CXX=yes
+	  hardcode_shlibpath_var_CXX=no
+	  hardcode_direct_absolute_CXX=yes
+	  archive_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
+	  hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir'
+	  if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+	    archive_expsym_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib'
+	    export_dynamic_flag_spec_CXX='${wl}-E'
+	    whole_archive_flag_spec_CXX="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+	  fi
+	  output_verbose_link_cmd=echo
+	else
+	  ld_shlibs_CXX=no
+	fi
+	;;
 
-    amigaos*)
-      archive_cmds_GCJ='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
-      hardcode_libdir_flag_spec_GCJ='-L$libdir'
-      hardcode_minus_L_GCJ=yes
-
-      # Samuel A. Falvo II <kc5tja@dolphin.openprojects.net> reports
-      # that the semantics of dynamic libraries on AmigaOS, at least up
-      # to version 4, is to share data among multiple programs linked
-      # with the same dynamic library.  Since this doesn't match the
-      # behavior of shared libraries on other platforms, we can't use
-      # them.
-      ld_shlibs_GCJ=no
-      ;;
+      osf3* | osf4* | osf5*)
+        case $cc_basename in
+          KCC*)
+	    # Kuck and Associates, Inc. (KAI) C++ Compiler
+
+	    # KCC will only create a shared library if the output file
+	    # ends with ".so" (or ".sl" for HP-UX), so rename the library
+	    # to its proper name (with version) after linking.
+	    archive_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo "$lib" | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
+
+	    hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir'
+	    hardcode_libdir_separator_CXX=:
+
+	    # Archives containing C++ object files must be created using
+	    # the KAI C++ compiler.
+	    case $host in
+	      osf3*) old_archive_cmds_CXX='$CC -Bstatic -o $oldlib $oldobjs' ;;
+	      *) old_archive_cmds_CXX='$CC -o $oldlib $oldobjs' ;;
+	    esac
+	    ;;
+          RCC*)
+	    # Rational C++ 2.4.1
+	    # FIXME: insert proper C++ library support
+	    ld_shlibs_CXX=no
+	    ;;
+          cxx*)
+	    case $host in
+	      osf3*)
+	        allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*'
+	        archive_cmds_CXX='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && $ECHO "X${wl}-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
+	        hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir'
+		;;
+	      *)
+	        allow_undefined_flag_CXX=' -expect_unresolved \*'
+	        archive_cmds_CXX='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
+	        archive_expsym_cmds_CXX='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~
+	          echo "-hidden">> $lib.exp~
+	          $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname ${wl}-input ${wl}$lib.exp  `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib~
+	          $RM $lib.exp'
+	        hardcode_libdir_flag_spec_CXX='-rpath $libdir'
+		;;
+	    esac
 
-    beos*)
-      if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-	allow_undefined_flag_GCJ=unsupported
-	# Joseph Beckenbach <jrb3@best.com> says some releases of gcc
-	# support --undefined.  This deserves some investigation.  FIXME
-	archive_cmds_GCJ='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-      else
-	ld_shlibs_GCJ=no
-      fi
-      ;;
+	    hardcode_libdir_separator_CXX=:
 
-    cygwin* | mingw* | pw32*)
-      # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, GCJ) is actually meaningless,
-      # as there is no search path for DLLs.
-      hardcode_libdir_flag_spec_GCJ='-L$libdir'
-      allow_undefined_flag_GCJ=unsupported
-      always_export_symbols_GCJ=no
-      enable_shared_with_static_runtimes_GCJ=yes
-      export_symbols_cmds_GCJ='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/'\'' -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols'
+	    # Commands to make compiler produce verbose output that lists
+	    # what "hidden" libraries, object files and flags are used when
+	    # linking a shared library.
+	    #
+	    # There doesn't appear to be a way to prevent this compiler from
+	    # explicitly linking system object files so we need to strip them
+	    # from the output so that they don't get included in the library
+	    # dependencies.
+	    output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld" | $GREP -v "ld:"`; templist=`$ECHO "X$templist" | $Xsed -e "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed'
+	    ;;
+	  *)
+	    if test "$GXX" = yes && test "$with_gnu_ld" = no; then
+	      allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*'
+	      case $host in
+	        osf3*)
+	          archive_cmds_CXX='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+		  ;;
+	        *)
+	          archive_cmds_CXX='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+		  ;;
+	      esac
+
+	      hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir'
+	      hardcode_libdir_separator_CXX=:
+
+	      # Commands to make compiler produce verbose output that lists
+	      # what "hidden" libraries, object files and flags are used when
+	      # linking a shared library.
+	      output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"'
+
+	    else
+	      # FIXME: insert proper C++ library support
+	      ld_shlibs_CXX=no
+	    fi
+	    ;;
+        esac
+        ;;
 
-      if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
-        archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
-	# If the export-symbols file already is a .def file (1st line
-	# is EXPORTS), use it as is; otherwise, prepend...
-	archive_expsym_cmds_GCJ='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
-	  cp $export_symbols $output_objdir/$soname.def;
-	else
-	  echo EXPORTS > $output_objdir/$soname.def;
-	  cat $export_symbols >> $output_objdir/$soname.def;
-	fi~
-	$CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
-      else
-	ld_shlibs_GCJ=no
-      fi
-      ;;
+      psos*)
+        # FIXME: insert proper C++ library support
+        ld_shlibs_CXX=no
+        ;;
 
-    interix[3-9]*)
-      hardcode_direct_GCJ=no
-      hardcode_shlibpath_var_GCJ=no
-      hardcode_libdir_flag_spec_GCJ='${wl}-rpath,$libdir'
-      export_dynamic_flag_spec_GCJ='${wl}-E'
-      # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
-      # Instead, shared libraries are loaded at an image base (0x10000000 by
-      # default) and relocated if they conflict, which is a slow very memory
-      # consuming and fragmenting process.  To avoid this, we pick a random,
-      # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
-      # time.  Moving up from 0x10000000 also allows more sbrk(2) space.
-      archive_cmds_GCJ='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
-      archive_expsym_cmds_GCJ='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
-      ;;
+      sunos4*)
+        case $cc_basename in
+          CC*)
+	    # Sun C++ 4.x
+	    # FIXME: insert proper C++ library support
+	    ld_shlibs_CXX=no
+	    ;;
+          lcc*)
+	    # Lucid
+	    # FIXME: insert proper C++ library support
+	    ld_shlibs_CXX=no
+	    ;;
+          *)
+	    # FIXME: insert proper C++ library support
+	    ld_shlibs_CXX=no
+	    ;;
+        esac
+        ;;
 
-    gnu* | linux* | k*bsd*-gnu)
-      if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-	tmp_addflag=
-	case $cc_basename,$host_cpu in
-	pgcc*)				# Portland Group C compiler
-	  whole_archive_flag_spec_GCJ='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
-	  tmp_addflag=' $pic_flag'
-	  ;;
-	pgf77* | pgf90* | pgf95*)	# Portland Group f77 and f90 compilers
-	  whole_archive_flag_spec_GCJ='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
-	  tmp_addflag=' $pic_flag -Mnomain' ;;
-	ecc*,ia64* | icc*,ia64*)		# Intel C compiler on ia64
-	  tmp_addflag=' -i_dynamic' ;;
-	efc*,ia64* | ifort*,ia64*)	# Intel Fortran compiler on ia64
-	  tmp_addflag=' -i_dynamic -nofor_main' ;;
-	ifc* | ifort*)			# Intel Fortran compiler
-	  tmp_addflag=' -nofor_main' ;;
-	esac
-	case `$CC -V 2>&1 | sed 5q` in
-	*Sun\ C*)			# Sun C 5.9
-	  whole_archive_flag_spec_GCJ='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
-	  tmp_sharedflag='-G' ;;
-	*Sun\ F*)			# Sun Fortran 8.3
-	  tmp_sharedflag='-G' ;;
-	*)
-	  tmp_sharedflag='-shared' ;;
-	esac
-	archive_cmds_GCJ='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-
-	if test $supports_anon_versioning = yes; then
-	  archive_expsym_cmds_GCJ='$echo "{ global:" > $output_objdir/$libname.ver~
-  cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
-  $echo "local: *; };" >> $output_objdir/$libname.ver~
-	  $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
-	fi
-	link_all_deplibs_GCJ=no
-      else
-	ld_shlibs_GCJ=no
-      fi
-      ;;
-
-    netbsd*)
-      if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-	archive_cmds_GCJ='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
-	wlarc=
-      else
-	archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-	archive_expsym_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-      fi
-      ;;
-
-    solaris*)
-      if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then
-	ld_shlibs_GCJ=no
-	cat <<EOF 1>&2
+      solaris*)
+        case $cc_basename in
+          CC*)
+	    # Sun C++ 4.2, 5.x and Centerline C++
+            archive_cmds_need_lc_CXX=yes
+	    no_undefined_flag_CXX=' -zdefs'
+	    archive_cmds_CXX='$CC -G${allow_undefined_flag}  -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	    archive_expsym_cmds_CXX='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+	      $CC -G${allow_undefined_flag} ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
+
+	    hardcode_libdir_flag_spec_CXX='-R$libdir'
+	    hardcode_shlibpath_var_CXX=no
+	    case $host_os in
+	      solaris2.[0-5] | solaris2.[0-5].*) ;;
+	      *)
+		# The compiler driver will combine and reorder linker options,
+		# but understands `-z linker_flag'.
+	        # Supported since Solaris 2.6 (maybe 2.5.1?)
+		whole_archive_flag_spec_CXX='-z allextract$convenience -z defaultextract'
+	        ;;
+	    esac
+	    link_all_deplibs_CXX=yes
 
-*** Warning: The releases 2.8.* of the GNU linker cannot reliably
-*** create shared libraries on Solaris systems.  Therefore, libtool
-*** is disabling shared libraries support.  We urge you to upgrade GNU
-*** binutils to release 2.9.1 or newer.  Another option is to modify
-*** your PATH or compiler configuration so that the native linker is
-*** used, and then restart.
+	    output_verbose_link_cmd='echo'
 
-EOF
-      elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-	archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-	archive_expsym_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-      else
-	ld_shlibs_GCJ=no
-      fi
-      ;;
+	    # Archives containing C++ object files must be created using
+	    # "CC -xar", where "CC" is the Sun C++ compiler.  This is
+	    # necessary to make sure instantiated templates are included
+	    # in the archive.
+	    old_archive_cmds_CXX='$CC -xar -o $oldlib $oldobjs'
+	    ;;
+          gcx*)
+	    # Green Hills C++ Compiler
+	    archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
 
-    sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
-      case `$LD -v 2>&1` in
-        *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*)
-	ld_shlibs_GCJ=no
-	cat <<_LT_EOF 1>&2
+	    # The C++ compiler must be used to create the archive.
+	    old_archive_cmds_CXX='$CC $LDFLAGS -archive -o $oldlib $oldobjs'
+	    ;;
+          *)
+	    # GNU C++ compiler with Solaris linker
+	    if test "$GXX" = yes && test "$with_gnu_ld" = no; then
+	      no_undefined_flag_CXX=' ${wl}-z ${wl}defs'
+	      if $CC --version | $GREP -v '^2\.7' > /dev/null; then
+	        archive_cmds_CXX='$CC -shared -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
+	        archive_expsym_cmds_CXX='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+		  $CC -shared -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
+
+	        # Commands to make compiler produce verbose output that lists
+	        # what "hidden" libraries, object files and flags are used when
+	        # linking a shared library.
+	        output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"'
+	      else
+	        # g++ 2.7 appears to require `-G' NOT `-shared' on this
+	        # platform.
+	        archive_cmds_CXX='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
+	        archive_expsym_cmds_CXX='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+		  $CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
+
+	        # Commands to make compiler produce verbose output that lists
+	        # what "hidden" libraries, object files and flags are used when
+	        # linking a shared library.
+	        output_verbose_link_cmd='$CC -G $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"'
+	      fi
+
+	      hardcode_libdir_flag_spec_CXX='${wl}-R $wl$libdir'
+	      case $host_os in
+		solaris2.[0-5] | solaris2.[0-5].*) ;;
+		*)
+		  whole_archive_flag_spec_CXX='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
+		  ;;
+	      esac
+	    fi
+	    ;;
+        esac
+        ;;
 
-*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not
-*** reliably create shared libraries on SCO systems.  Therefore, libtool
-*** is disabling shared libraries support.  We urge you to upgrade GNU
-*** binutils to release 2.16.91.0.3 or newer.  Another option is to modify
-*** your PATH or compiler configuration so that the native linker is
-*** used, and then restart.
+    sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*)
+      no_undefined_flag_CXX='${wl}-z,text'
+      archive_cmds_need_lc_CXX=no
+      hardcode_shlibpath_var_CXX=no
+      runpath_var='LD_RUN_PATH'
 
-_LT_EOF
-	;;
+      case $cc_basename in
+        CC*)
+	  archive_cmds_CXX='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  archive_expsym_cmds_CXX='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
 	*)
-	  if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-	    hardcode_libdir_flag_spec_GCJ='`test -z "$SCOABSPATH" && echo ${wl}-rpath,$libdir`'
-	    archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib'
-	    archive_expsym_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname,-retain-symbols-file,$export_symbols -o $lib'
-	  else
-	    ld_shlibs_GCJ=no
-	  fi
-	;;
+	  archive_cmds_CXX='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  archive_expsym_cmds_CXX='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
       esac
       ;;
 
-    sunos4*)
-      archive_cmds_GCJ='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-      wlarc=
-      hardcode_direct_GCJ=yes
-      hardcode_shlibpath_var_GCJ=no
-      ;;
-
-    *)
-      if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-	archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-	archive_expsym_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-      else
-	ld_shlibs_GCJ=no
-      fi
-      ;;
-    esac
+      sysv5* | sco3.2v5* | sco5v6*)
+	# Note: We can NOT use -z defs as we might desire, because we do not
+	# link with -lc, and that would cause any symbols used from libc to
+	# always be unresolved, which means just about no library would
+	# ever link correctly.  If we're not using GNU ld we use -z text
+	# though, which does catch some bad symbols but isn't as heavy-handed
+	# as -z defs.
+	no_undefined_flag_CXX='${wl}-z,text'
+	allow_undefined_flag_CXX='${wl}-z,nodefs'
+	archive_cmds_need_lc_CXX=no
+	hardcode_shlibpath_var_CXX=no
+	hardcode_libdir_flag_spec_CXX='${wl}-R,$libdir'
+	hardcode_libdir_separator_CXX=':'
+	link_all_deplibs_CXX=yes
+	export_dynamic_flag_spec_CXX='${wl}-Bexport'
+	runpath_var='LD_RUN_PATH'
 
-    if test "$ld_shlibs_GCJ" = no; then
-      runpath_var=
-      hardcode_libdir_flag_spec_GCJ=
-      export_dynamic_flag_spec_GCJ=
-      whole_archive_flag_spec_GCJ=
-    fi
-  else
-    # PORTME fill in a description of your system's linker (not GNU ld)
-    case $host_os in
-    aix3*)
-      allow_undefined_flag_GCJ=unsupported
-      always_export_symbols_GCJ=yes
-      archive_expsym_cmds_GCJ='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
-      # Note: this linker hardcodes the directories in LIBPATH if there
-      # are no directories specified by -L.
-      hardcode_minus_L_GCJ=yes
-      if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then
-	# Neither direct hardcoding nor static linking is supported with a
-	# broken collect2.
-	hardcode_direct_GCJ=unsupported
-      fi
+	case $cc_basename in
+          CC*)
+	    archive_cmds_CXX='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	    archive_expsym_cmds_CXX='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	    ;;
+	  *)
+	    archive_cmds_CXX='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	    archive_expsym_cmds_CXX='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	    ;;
+	esac
       ;;
 
-    aix[4-9]*)
-      if test "$host_cpu" = ia64; then
-	# On IA64, the linker does run time linking by default, so we don't
-	# have to do anything special.
-	aix_use_runtimelinking=no
-	exp_sym_flag='-Bexport'
-	no_entry_flag=""
-      else
-	# If we're using GNU nm, then we don't want the "-C" option.
-	# -C means demangle to AIX nm, but means don't demangle with GNU nm
-	if $NM -V 2>&1 | grep 'GNU' > /dev/null; then
-	  export_symbols_cmds_GCJ='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols'
-	else
-	  export_symbols_cmds_GCJ='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols'
-	fi
-	aix_use_runtimelinking=no
-
-	# Test if we are trying to use run time linking or normal
-	# AIX style linking. If -brtl is somewhere in LDFLAGS, we
-	# need to do runtime linking.
-	case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*)
-	  for ld_flag in $LDFLAGS; do
-  	  if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
-  	    aix_use_runtimelinking=yes
-  	    break
-  	  fi
-	  done
-	  ;;
-	esac
+      tandem*)
+        case $cc_basename in
+          NCC*)
+	    # NonStop-UX NCC 3.20
+	    # FIXME: insert proper C++ library support
+	    ld_shlibs_CXX=no
+	    ;;
+          *)
+	    # FIXME: insert proper C++ library support
+	    ld_shlibs_CXX=no
+	    ;;
+        esac
+        ;;
 
-	exp_sym_flag='-bexport'
-	no_entry_flag='-bnoentry'
-      fi
+      vxworks*)
+        # FIXME: insert proper C++ library support
+        ld_shlibs_CXX=no
+        ;;
 
-      # When large executables or shared objects are built, AIX ld can
-      # have problems creating the table of contents.  If linking a library
-      # or program results in "error TOC overflow" add -mminimal-toc to
-      # CXXFLAGS/CFLAGS for g++/gcc.  In the cases where that is not
-      # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
+      *)
+        # FIXME: insert proper C++ library support
+        ld_shlibs_CXX=no
+        ;;
+    esac
 
-      archive_cmds_GCJ=''
-      hardcode_direct_GCJ=yes
-      hardcode_libdir_separator_GCJ=':'
-      link_all_deplibs_GCJ=yes
+    { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ld_shlibs_CXX" >&5
+$as_echo "$ld_shlibs_CXX" >&6; }
+    test "$ld_shlibs_CXX" = no && can_build_shared=no
 
-      if test "$GCC" = yes; then
-	case $host_os in aix4.[012]|aix4.[012].*)
-	# We only want to do this on AIX 4.2 and lower, the check
-	# below for broken collect2 doesn't work under 4.3+
-	  collect2name=`${CC} -print-prog-name=collect2`
-	  if test -f "$collect2name" && \
-  	   strings "$collect2name" | grep resolve_lib_name >/dev/null
-	  then
-  	  # We have reworked collect2
-  	  :
-	  else
-  	  # We have old collect2
-  	  hardcode_direct_GCJ=unsupported
-  	  # It fails to find uninstalled libraries when the uninstalled
-  	  # path is not listed in the libpath.  Setting hardcode_minus_L
-  	  # to unsupported forces relinking
-  	  hardcode_minus_L_GCJ=yes
-  	  hardcode_libdir_flag_spec_GCJ='-L$libdir'
-  	  hardcode_libdir_separator_GCJ=
-	  fi
-	  ;;
-	esac
-	shared_flag='-shared'
-	if test "$aix_use_runtimelinking" = yes; then
-	  shared_flag="$shared_flag "'${wl}-G'
-	fi
-      else
-	# not using gcc
-	if test "$host_cpu" = ia64; then
-  	# VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
-  	# chokes on -Wl,-G. The following line is correct:
-	  shared_flag='-G'
-	else
-	  if test "$aix_use_runtimelinking" = yes; then
-	    shared_flag='${wl}-G'
-	  else
-	    shared_flag='${wl}-bM:SRE'
-	  fi
-	fi
-      fi
+    GCC_CXX="$GXX"
+    LD_CXX="$LD"
 
-      # It seems that -bexpall does not export symbols beginning with
-      # underscore (_), so it is better to generate a list of symbols to export.
-      always_export_symbols_GCJ=yes
-      if test "$aix_use_runtimelinking" = yes; then
-	# Warning - without using the other runtime loading flags (-brtl),
-	# -berok will link without error, but may produce a broken library.
-	allow_undefined_flag_GCJ='-berok'
-       # Determine the default libpath from the value encoded in an empty executable.
-       cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
+    ## CAVEAT EMPTOR:
+    ## There is no encapsulation within the following macros, do not change
+    ## the running order or otherwise move them around unless you know exactly
+    ## what you are doing...
+    # Dependencies to place before and after the object being linked:
+predep_objects_CXX=
+postdep_objects_CXX=
+predeps_CXX=
+postdeps_CXX=
+compiler_lib_search_path_CXX=
 
-int
-main ()
+cat > conftest.$ac_ext <<_LT_EOF
+class Foo
 {
+public:
+  Foo (void) { a = 0; }
+private:
+  int a;
+};
+_LT_EOF
 
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_link") 2>conftest.er1
+if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+  (eval $ac_compile) 2>&5
   ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest$ac_exeext && {
-	 test "$cross_compiling" = yes ||
-	 $as_test_x conftest$ac_exeext
-       }; then
-
-lt_aix_libpath_sed='
-    /Import File Strings/,/^$/ {
-	/^0/ {
-	    s/^0  *\(.*\)$/\1/
-	    p
-	}
-    }'
-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-# Check for a 64-bit object if we didn't find anything.
-if test -z "$aix_libpath"; then
-  aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-fi
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }; then
+  # Parse the compiler output and extract the necessary
+  # objects, libraries and library flags.
 
-fi
+  # Sentinel used to keep track of whether or not we are before
+  # the conftest object file.
+  pre_test_object_deps_done=no
 
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-      conftest$ac_exeext conftest.$ac_ext
-if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
+  for p in `eval "$output_verbose_link_cmd"`; do
+    case $p in
 
-       hardcode_libdir_flag_spec_GCJ='${wl}-blibpath:$libdir:'"$aix_libpath"
-	archive_expsym_cmds_GCJ="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+    -L* | -R* | -l*)
+       # Some compilers place space between "-{L,R}" and the path.
+       # Remove the space.
+       if test $p = "-L" ||
+          test $p = "-R"; then
+	 prev=$p
+	 continue
        else
-	if test "$host_cpu" = ia64; then
-	  hardcode_libdir_flag_spec_GCJ='${wl}-R $libdir:/usr/lib:/lib'
-	  allow_undefined_flag_GCJ="-z nodefs"
-	  archive_expsym_cmds_GCJ="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
-	else
-	 # Determine the default libpath from the value encoded in an empty executable.
-	 cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
+	 prev=
+       fi
 
-int
-main ()
-{
+       if test "$pre_test_object_deps_done" = no; then
+	 case $p in
+	 -L* | -R*)
+	   # Internal compiler library paths should come after those
+	   # provided the user.  The postdeps already come after the
+	   # user supplied libs so there is no need to process them.
+	   if test -z "$compiler_lib_search_path_CXX"; then
+	     compiler_lib_search_path_CXX="${prev}${p}"
+	   else
+	     compiler_lib_search_path_CXX="${compiler_lib_search_path_CXX} ${prev}${p}"
+	   fi
+	   ;;
+	 # The "-l" case would never come before the object being
+	 # linked, so don't bother handling this case.
+	 esac
+       else
+	 if test -z "$postdeps_CXX"; then
+	   postdeps_CXX="${prev}${p}"
+	 else
+	   postdeps_CXX="${postdeps_CXX} ${prev}${p}"
+	 fi
+       fi
+       ;;
 
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_link") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest$ac_exeext && {
-	 test "$cross_compiling" = yes ||
-	 $as_test_x conftest$ac_exeext
-       }; then
+    *.$objext)
+       # This assumes that the test object file only shows up
+       # once in the compiler output.
+       if test "$p" = "conftest.$objext"; then
+	 pre_test_object_deps_done=yes
+	 continue
+       fi
 
-lt_aix_libpath_sed='
-    /Import File Strings/,/^$/ {
-	/^0/ {
-	    s/^0  *\(.*\)$/\1/
-	    p
-	}
-    }'
-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-# Check for a 64-bit object if we didn't find anything.
-if test -z "$aix_libpath"; then
-  aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-fi
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
+       if test "$pre_test_object_deps_done" = no; then
+	 if test -z "$predep_objects_CXX"; then
+	   predep_objects_CXX="$p"
+	 else
+	   predep_objects_CXX="$predep_objects_CXX $p"
+	 fi
+       else
+	 if test -z "$postdep_objects_CXX"; then
+	   postdep_objects_CXX="$p"
+	 else
+	   postdep_objects_CXX="$postdep_objects_CXX $p"
+	 fi
+       fi
+       ;;
+
+    *) ;; # Ignore the rest.
 
+    esac
+  done
 
+  # Clean up.
+  rm -f a.out a.exe
+else
+  echo "libtool.m4: error: problem compiling CXX test program"
 fi
 
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-      conftest$ac_exeext conftest.$ac_ext
-if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
+$RM -f confest.$objext
 
-	 hardcode_libdir_flag_spec_GCJ='${wl}-blibpath:$libdir:'"$aix_libpath"
-	  # Warning - without using the other run time loading flags,
-	  # -berok will link without error, but may produce a broken library.
-	  no_undefined_flag_GCJ=' ${wl}-bernotok'
-	  allow_undefined_flag_GCJ=' ${wl}-berok'
-	  # Exported symbols can be pulled into shared objects from archives
-	  whole_archive_flag_spec_GCJ='$convenience'
-	  archive_cmds_need_lc_GCJ=yes
-	  # This is similar to how AIX traditionally builds its shared libraries.
-	  archive_expsym_cmds_GCJ="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
-	fi
-      fi
-      ;;
+# PORTME: override above test on systems where it is broken
+case $host_os in
+interix[3-9]*)
+  # Interix 3.5 installs completely hosed .la files for C++, so rather than
+  # hack all around it, let's just trust "g++" to DTRT.
+  predep_objects_CXX=
+  postdep_objects_CXX=
+  postdeps_CXX=
+  ;;
 
-    amigaos*)
-      archive_cmds_GCJ='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
-      hardcode_libdir_flag_spec_GCJ='-L$libdir'
-      hardcode_minus_L_GCJ=yes
-      # see comment about different semantics on the GNU ld section
-      ld_shlibs_GCJ=no
-      ;;
+linux*)
+  case `$CC -V 2>&1 | sed 5q` in
+  *Sun\ C*)
+    # Sun C++ 5.9
 
-    bsdi[45]*)
-      export_dynamic_flag_spec_GCJ=-rdynamic
+    # The more standards-conforming stlport4 library is
+    # incompatible with the Cstd library. Avoid specifying
+    # it if it's in CXXFLAGS. Ignore libCrun as
+    # -library=stlport4 depends on it.
+    case " $CXX $CXXFLAGS " in
+    *" -library=stlport4 "*)
+      solaris_use_stlport4=yes
       ;;
+    esac
 
-    cygwin* | mingw* | pw32*)
-      # When not using gcc, we currently assume that we are using
-      # Microsoft Visual C++.
-      # hardcode_libdir_flag_spec is actually meaningless, as there is
-      # no search path for DLLs.
-      hardcode_libdir_flag_spec_GCJ=' '
-      allow_undefined_flag_GCJ=unsupported
-      # Tell ltmain to make .lib files, not .a files.
-      libext=lib
-      # Tell ltmain to make .dll files, not .so files.
-      shrext_cmds=".dll"
-      # FIXME: Setting linknames here is a bad hack.
-      archive_cmds_GCJ='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames='
-      # The linker will automatically build a .lib file if we build a DLL.
-      old_archive_From_new_cmds_GCJ='true'
-      # FIXME: Should let the user specify the lib program.
-      old_archive_cmds_GCJ='lib -OUT:$oldlib$oldobjs$old_deplibs'
-      fix_srcfile_path_GCJ='`cygpath -w "$srcfile"`'
-      enable_shared_with_static_runtimes_GCJ=yes
+    if test "$solaris_use_stlport4" != yes; then
+      postdeps_CXX='-library=Cstd -library=Crun'
+    fi
+    ;;
+  esac
+  ;;
+
+solaris*)
+  case $cc_basename in
+  CC*)
+    # The more standards-conforming stlport4 library is
+    # incompatible with the Cstd library. Avoid specifying
+    # it if it's in CXXFLAGS. Ignore libCrun as
+    # -library=stlport4 depends on it.
+    case " $CXX $CXXFLAGS " in
+    *" -library=stlport4 "*)
+      solaris_use_stlport4=yes
       ;;
+    esac
 
-    darwin* | rhapsody*)
-      case $host_os in
-        rhapsody* | darwin1.[012])
-         allow_undefined_flag_GCJ='${wl}-undefined ${wl}suppress'
-         ;;
-       *) # Darwin 1.3 on
-         if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then
-           allow_undefined_flag_GCJ='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
-         else
-           case ${MACOSX_DEPLOYMENT_TARGET} in
-             10.[012])
-               allow_undefined_flag_GCJ='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
-               ;;
-             10.*)
-               allow_undefined_flag_GCJ='${wl}-undefined ${wl}dynamic_lookup'
-               ;;
-           esac
-         fi
-         ;;
-      esac
-      archive_cmds_need_lc_GCJ=no
-      hardcode_direct_GCJ=no
-      hardcode_automatic_GCJ=yes
-      hardcode_shlibpath_var_GCJ=unsupported
-      whole_archive_flag_spec_GCJ=''
-      link_all_deplibs_GCJ=yes
-    if test "$GCC" = yes ; then
-    	output_verbose_link_cmd='echo'
-        archive_cmds_GCJ="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}"
-        module_cmds_GCJ="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}"
-        archive_expsym_cmds_GCJ="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}"
-        module_expsym_cmds_GCJ="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}"
-    else
-      case $cc_basename in
-        xlc*)
-         output_verbose_link_cmd='echo'
-         archive_cmds_GCJ='$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $xlcverstring'
-         module_cmds_GCJ='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
-          # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
-         archive_expsym_cmds_GCJ='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $xlcverstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-          module_expsym_cmds_GCJ='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag  -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-          ;;
-       *)
-         ld_shlibs_GCJ=no
-          ;;
-      esac
+    # Adding this requires a known-good setup of shared libraries for
+    # Sun compiler versions before 5.6, else PIC objects from an old
+    # archive will be linked into the output, leading to subtle bugs.
+    if test "$solaris_use_stlport4" != yes; then
+      postdeps_CXX='-library=Cstd -library=Crun'
     fi
-      ;;
+    ;;
+  esac
+  ;;
+esac
 
-    dgux*)
-      archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-      hardcode_libdir_flag_spec_GCJ='-L$libdir'
-      hardcode_shlibpath_var_GCJ=no
-      ;;
 
-    freebsd1*)
-      ld_shlibs_GCJ=no
-      ;;
+case " $postdeps_CXX " in
+*" -lc "*) archive_cmds_need_lc_CXX=no ;;
+esac
+ compiler_lib_search_dirs_CXX=
+if test -n "${compiler_lib_search_path_CXX}"; then
+ compiler_lib_search_dirs_CXX=`echo " ${compiler_lib_search_path_CXX}" | ${SED} -e 's! -L! !g' -e 's!^ !!'`
+fi
 
-    # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
-    # support.  Future versions do this automatically, but an explicit c++rt0.o
-    # does not break anything, and helps significantly (at the cost of a little
-    # extra space).
-    freebsd2.2*)
-      archive_cmds_GCJ='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
-      hardcode_libdir_flag_spec_GCJ='-R$libdir'
-      hardcode_direct_GCJ=yes
-      hardcode_shlibpath_var_GCJ=no
-      ;;
 
-    # Unfortunately, older versions of FreeBSD 2 do not have this feature.
-    freebsd2*)
-      archive_cmds_GCJ='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-      hardcode_direct_GCJ=yes
-      hardcode_minus_L_GCJ=yes
-      hardcode_shlibpath_var_GCJ=no
-      ;;
 
-    # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
-    freebsd* | dragonfly*)
-      archive_cmds_GCJ='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
-      hardcode_libdir_flag_spec_GCJ='-R$libdir'
-      hardcode_direct_GCJ=yes
-      hardcode_shlibpath_var_GCJ=no
-      ;;
 
-    hpux9*)
-      if test "$GCC" = yes; then
-	archive_cmds_GCJ='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
-      else
-	archive_cmds_GCJ='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
-      fi
-      hardcode_libdir_flag_spec_GCJ='${wl}+b ${wl}$libdir'
-      hardcode_libdir_separator_GCJ=:
-      hardcode_direct_GCJ=yes
 
-      # hardcode_minus_L: Not really in the search PATH,
-      # but as the default location of the library.
-      hardcode_minus_L_GCJ=yes
-      export_dynamic_flag_spec_GCJ='${wl}-E'
-      ;;
 
-    hpux10*)
-      if test "$GCC" = yes -a "$with_gnu_ld" = no; then
-	archive_cmds_GCJ='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
-      else
-	archive_cmds_GCJ='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
-      fi
-      if test "$with_gnu_ld" = no; then
-	hardcode_libdir_flag_spec_GCJ='${wl}+b ${wl}$libdir'
-	hardcode_libdir_separator_GCJ=:
 
-	hardcode_direct_GCJ=yes
-	export_dynamic_flag_spec_GCJ='${wl}-E'
 
-	# hardcode_minus_L: Not really in the search PATH,
-	# but as the default location of the library.
-	hardcode_minus_L_GCJ=yes
-      fi
-      ;;
 
-    hpux11*)
-      if test "$GCC" = yes -a "$with_gnu_ld" = no; then
-	case $host_cpu in
-	hppa*64*)
-	  archive_cmds_GCJ='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-	  ;;
-	ia64*)
-	  archive_cmds_GCJ='$CC -shared ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
-	  ;;
-	*)
-	  archive_cmds_GCJ='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
-	  ;;
-	esac
-      else
-	case $host_cpu in
-	hppa*64*)
-	  archive_cmds_GCJ='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-	  ;;
-	ia64*)
-	  archive_cmds_GCJ='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
-	  ;;
-	*)
-	  archive_cmds_GCJ='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
-	  ;;
-	esac
-      fi
-      if test "$with_gnu_ld" = no; then
-	hardcode_libdir_flag_spec_GCJ='${wl}+b ${wl}$libdir'
-	hardcode_libdir_separator_GCJ=:
 
-	case $host_cpu in
-	hppa*64*|ia64*)
-	  hardcode_libdir_flag_spec_ld_GCJ='+b $libdir'
-	  hardcode_direct_GCJ=no
-	  hardcode_shlibpath_var_GCJ=no
-	  ;;
-	*)
-	  hardcode_direct_GCJ=yes
-	  export_dynamic_flag_spec_GCJ='${wl}-E'
 
-	  # hardcode_minus_L: Not really in the search PATH,
-	  # but as the default location of the library.
-	  hardcode_minus_L_GCJ=yes
-	  ;;
-	esac
-      fi
-      ;;
 
-    irix5* | irix6* | nonstopux*)
-      if test "$GCC" = yes; then
-	archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-      else
-	archive_cmds_GCJ='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-	hardcode_libdir_flag_spec_ld_GCJ='-rpath $libdir'
-      fi
-      hardcode_libdir_flag_spec_GCJ='${wl}-rpath ${wl}$libdir'
-      hardcode_libdir_separator_GCJ=:
-      link_all_deplibs_GCJ=yes
-      ;;
 
-    netbsd*)
-      if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-	archive_cmds_GCJ='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'  # a.out
-      else
-	archive_cmds_GCJ='$LD -shared -o $lib $libobjs $deplibs $linker_flags'      # ELF
-      fi
-      hardcode_libdir_flag_spec_GCJ='-R$libdir'
-      hardcode_direct_GCJ=yes
-      hardcode_shlibpath_var_GCJ=no
-      ;;
 
-    newsos6)
-      archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-      hardcode_direct_GCJ=yes
-      hardcode_libdir_flag_spec_GCJ='${wl}-rpath ${wl}$libdir'
-      hardcode_libdir_separator_GCJ=:
-      hardcode_shlibpath_var_GCJ=no
-      ;;
 
-    openbsd*)
-      if test -f /usr/libexec/ld.so; then
-	hardcode_direct_GCJ=yes
-	hardcode_shlibpath_var_GCJ=no
-	if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-	  archive_cmds_GCJ='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
-	  archive_expsym_cmds_GCJ='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
-	  hardcode_libdir_flag_spec_GCJ='${wl}-rpath,$libdir'
-	  export_dynamic_flag_spec_GCJ='${wl}-E'
-	else
-	  case $host_os in
-	   openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*)
-	     archive_cmds_GCJ='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-	     hardcode_libdir_flag_spec_GCJ='-R$libdir'
-	     ;;
-	   *)
-	     archive_cmds_GCJ='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
-	     hardcode_libdir_flag_spec_GCJ='${wl}-rpath,$libdir'
-	     ;;
-	  esac
-        fi
-      else
-	ld_shlibs_GCJ=no
-      fi
-      ;;
 
-    os2*)
-      hardcode_libdir_flag_spec_GCJ='-L$libdir'
-      hardcode_minus_L_GCJ=yes
-      allow_undefined_flag_GCJ=unsupported
-      archive_cmds_GCJ='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
-      old_archive_From_new_cmds_GCJ='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
-      ;;
 
-    osf3*)
-      if test "$GCC" = yes; then
-	allow_undefined_flag_GCJ=' ${wl}-expect_unresolved ${wl}\*'
-	archive_cmds_GCJ='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-      else
-	allow_undefined_flag_GCJ=' -expect_unresolved \*'
-	archive_cmds_GCJ='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-      fi
-      hardcode_libdir_flag_spec_GCJ='${wl}-rpath ${wl}$libdir'
-      hardcode_libdir_separator_GCJ=:
-      ;;
 
-    osf4* | osf5*)	# as osf3* with the addition of -msym flag
-      if test "$GCC" = yes; then
-	allow_undefined_flag_GCJ=' ${wl}-expect_unresolved ${wl}\*'
-	archive_cmds_GCJ='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-	hardcode_libdir_flag_spec_GCJ='${wl}-rpath ${wl}$libdir'
-      else
-	allow_undefined_flag_GCJ=' -expect_unresolved \*'
-	archive_cmds_GCJ='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-	archive_expsym_cmds_GCJ='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~
-	$LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~$rm $lib.exp'
 
-	# Both c and cxx compiler support -rpath directly
-	hardcode_libdir_flag_spec_GCJ='-rpath $libdir'
-      fi
-      hardcode_libdir_separator_GCJ=:
-      ;;
 
-    solaris*)
-      no_undefined_flag_GCJ=' -z text'
-      if test "$GCC" = yes; then
-	wlarc='${wl}'
-	archive_cmds_GCJ='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-	archive_expsym_cmds_GCJ='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-	  $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp'
-      else
-	wlarc=''
-	archive_cmds_GCJ='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
-	archive_expsym_cmds_GCJ='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-  	$LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
-      fi
-      hardcode_libdir_flag_spec_GCJ='-R$libdir'
-      hardcode_shlibpath_var_GCJ=no
-      case $host_os in
-      solaris2.[0-5] | solaris2.[0-5].*) ;;
-      *)
-	# The compiler driver will combine and reorder linker options,
-	# but understands `-z linker_flag'.  GCC discards it without `$wl',
-	# but is careful enough not to reorder.
- 	# Supported since Solaris 2.6 (maybe 2.5.1?)
-	if test "$GCC" = yes; then
-	  whole_archive_flag_spec_GCJ='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
-	else
-	  whole_archive_flag_spec_GCJ='-z allextract$convenience -z defaultextract'
-	fi
-	;;
-      esac
-      link_all_deplibs_GCJ=yes
-      ;;
 
-    sunos4*)
-      if test "x$host_vendor" = xsequent; then
-	# Use $CC to link under sequent, because it throws in some extra .o
-	# files that make .init and .fini sections work.
-	archive_cmds_GCJ='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
-      else
-	archive_cmds_GCJ='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
-      fi
-      hardcode_libdir_flag_spec_GCJ='-L$libdir'
-      hardcode_direct_GCJ=yes
-      hardcode_minus_L_GCJ=yes
-      hardcode_shlibpath_var_GCJ=no
-      ;;
-
-    sysv4)
-      case $host_vendor in
-	sni)
-	  archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-	  hardcode_direct_GCJ=yes # is this really true???
-	;;
-	siemens)
-	  ## LD is ld it makes a PLAMLIB
-	  ## CC just makes a GrossModule.
-	  archive_cmds_GCJ='$LD -G -o $lib $libobjs $deplibs $linker_flags'
-	  reload_cmds_GCJ='$CC -r -o $output$reload_objs'
-	  hardcode_direct_GCJ=no
-        ;;
-	motorola)
-	  archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-	  hardcode_direct_GCJ=no #Motorola manual says yes, but my tests say they lie
-	;;
-      esac
-      runpath_var='LD_RUN_PATH'
-      hardcode_shlibpath_var_GCJ=no
-      ;;
-
-    sysv4.3*)
-      archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-      hardcode_shlibpath_var_GCJ=no
-      export_dynamic_flag_spec_GCJ='-Bexport'
-      ;;
-
-    sysv4*MP*)
-      if test -d /usr/nec; then
-	archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-	hardcode_shlibpath_var_GCJ=no
-	runpath_var=LD_RUN_PATH
-	hardcode_runpath_var=yes
-	ld_shlibs_GCJ=yes
-      fi
-      ;;
-
-    sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*)
-      no_undefined_flag_GCJ='${wl}-z,text'
-      archive_cmds_need_lc_GCJ=no
-      hardcode_shlibpath_var_GCJ=no
-      runpath_var='LD_RUN_PATH'
 
-      if test "$GCC" = yes; then
-	archive_cmds_GCJ='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-	archive_expsym_cmds_GCJ='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-      else
-	archive_cmds_GCJ='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-	archive_expsym_cmds_GCJ='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-      fi
-      ;;
-
-    sysv5* | sco3.2v5* | sco5v6*)
-      # Note: We can NOT use -z defs as we might desire, because we do not
-      # link with -lc, and that would cause any symbols used from libc to
-      # always be unresolved, which means just about no library would
-      # ever link correctly.  If we're not using GNU ld we use -z text
-      # though, which does catch some bad symbols but isn't as heavy-handed
-      # as -z defs.
-      no_undefined_flag_GCJ='${wl}-z,text'
-      allow_undefined_flag_GCJ='${wl}-z,nodefs'
-      archive_cmds_need_lc_GCJ=no
-      hardcode_shlibpath_var_GCJ=no
-      hardcode_libdir_flag_spec_GCJ='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`'
-      hardcode_libdir_separator_GCJ=':'
-      link_all_deplibs_GCJ=yes
-      export_dynamic_flag_spec_GCJ='${wl}-Bexport'
-      runpath_var='LD_RUN_PATH'
-
-      if test "$GCC" = yes; then
-	archive_cmds_GCJ='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
-	archive_expsym_cmds_GCJ='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
-      else
-	archive_cmds_GCJ='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
-	archive_expsym_cmds_GCJ='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
-      fi
-      ;;
 
-    uts4*)
-      archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-      hardcode_libdir_flag_spec_GCJ='-L$libdir'
-      hardcode_shlibpath_var_GCJ=no
-      ;;
 
-    *)
-      ld_shlibs_GCJ=no
-      ;;
-    esac
-  fi
 
-{ $as_echo "$as_me:$LINENO: result: $ld_shlibs_GCJ" >&5
-$as_echo "$ld_shlibs_GCJ" >&6; }
-test "$ld_shlibs_GCJ" = no && can_build_shared=no
 
-#
-# Do we need to explicitly link libc?
-#
-case "x$archive_cmds_need_lc_GCJ" in
-x|xyes)
-  # Assume -lc should be added
-  archive_cmds_need_lc_GCJ=yes
 
-  if test "$enable_shared" = yes && test "$GCC" = yes; then
-    case $archive_cmds_GCJ in
-    *'~'*)
-      # FIXME: we may have to deal with multi-command sequences.
-      ;;
-    '$CC '*)
-      # Test whether the compiler implicitly links with -lc since on some
-      # systems, -lgcc has to come before -lc. If gcc already passes -lc
-      # to ld, don't add -lc before -lgcc.
-      { $as_echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5
-$as_echo_n "checking whether -lc should be explicitly linked in... " >&6; }
-      $rm conftest*
-      echo "$lt_simple_compile_test_code" > conftest.$ac_ext
 
-      if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } 2>conftest.err; then
-        soname=conftest
-        lib=conftest
-        libobjs=conftest.$ac_objext
-        deplibs=
-        wl=$lt_prog_compiler_wl_GCJ
-	pic_flag=$lt_prog_compiler_pic_GCJ
-        compiler_flags=-v
-        linker_flags=-v
-        verstring=
-        output_objdir=.
-        libname=conftest
-        lt_save_allow_undefined_flag=$allow_undefined_flag_GCJ
-        allow_undefined_flag_GCJ=
-        if { (eval echo "$as_me:$LINENO: \"$archive_cmds_GCJ 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1\"") >&5
-  (eval $archive_cmds_GCJ 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) 2>&5
-  ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }
-        then
-	  archive_cmds_need_lc_GCJ=no
-        else
-	  archive_cmds_need_lc_GCJ=yes
-        fi
-        allow_undefined_flag_GCJ=$lt_save_allow_undefined_flag
-      else
-        cat conftest.err 1>&5
-      fi
-      $rm conftest*
-      { $as_echo "$as_me:$LINENO: result: $archive_cmds_need_lc_GCJ" >&5
-$as_echo "$archive_cmds_need_lc_GCJ" >&6; }
-      ;;
-    esac
-  fi
-  ;;
-esac
 
-{ $as_echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5
-$as_echo_n "checking dynamic linker characteristics... " >&6; }
-library_names_spec=
-libname_spec='lib$name'
-soname_spec=
-shrext_cmds=".so"
-postinstall_cmds=
-postuninstall_cmds=
-finish_cmds=
-finish_eval=
-shlibpath_var=
-shlibpath_overrides_runpath=unknown
-version_type=none
-dynamic_linker="$host_os ld.so"
-sys_lib_dlsearch_path_spec="/lib /usr/lib"
 
-need_lib_prefix=unknown
-hardcode_into_libs=no
 
-# when you set need_version to no, make sure it does not cause -set_version
-# flags to be left without arguments
-need_version=unknown
+    lt_prog_compiler_wl_CXX=
+lt_prog_compiler_pic_CXX=
+lt_prog_compiler_static_CXX=
 
-case $host_os in
-aix3*)
-  version_type=linux
-  library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
-  shlibpath_var=LIBPATH
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $compiler option to produce PIC" >&5
+$as_echo_n "checking for $compiler option to produce PIC... " >&6; }
 
-  # AIX 3 has no versioning support, so we append a major version to the name.
-  soname_spec='${libname}${release}${shared_ext}$major'
-  ;;
+  # C++ specific cases for pic, static, wl, etc.
+  if test "$GXX" = yes; then
+    lt_prog_compiler_wl_CXX='-Wl,'
+    lt_prog_compiler_static_CXX='-static'
 
-aix[4-9]*)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  hardcode_into_libs=yes
-  if test "$host_cpu" = ia64; then
-    # AIX 5 supports IA64
-    library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
-    shlibpath_var=LD_LIBRARY_PATH
-  else
-    # With GCC up to 2.95.x, collect2 would create an import file
-    # for dependence libraries.  The import file would start with
-    # the line `#! .'.  This would cause the generated library to
-    # depend on `.', always an invalid library.  This was fixed in
-    # development snapshots of GCC prior to 3.0.
     case $host_os in
-      aix4 | aix4.[01] | aix4.[01].*)
-      if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
-	   echo ' yes '
-	   echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then
-	:
-      else
-	can_build_shared=no
+    aix*)
+      # All AIX code is PIC.
+      if test "$host_cpu" = ia64; then
+	# AIX 5 now supports IA64 processor
+	lt_prog_compiler_static_CXX='-Bstatic'
       fi
       ;;
-    esac
-    # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
-    # soname into executable. Probably we can add versioning support to
-    # collect2, so additional links can be useful in future.
-    if test "$aix_use_runtimelinking" = yes; then
-      # If using run time linking (on AIX 4.2 or later) use lib<name>.so
-      # instead of lib<name>.a to let people know that these are not
-      # typical AIX shared libraries.
-      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-    else
-      # We preserve .a as extension for shared libraries through AIX4.2
-      # and later when we are not doing run time linking.
-      library_names_spec='${libname}${release}.a $libname.a'
-      soname_spec='${libname}${release}${shared_ext}$major'
-    fi
-    shlibpath_var=LIBPATH
-  fi
-  ;;
-
-amigaos*)
-  library_names_spec='$libname.ixlibrary $libname.a'
-  # Create ${libname}_ixlibrary.a entries in /sys/libs.
-  finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
-  ;;
-
-beos*)
-  library_names_spec='${libname}${shared_ext}'
-  dynamic_linker="$host_os ld.so"
-  shlibpath_var=LIBRARY_PATH
-  ;;
-
-bsdi[45]*)
-  version_type=linux
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
-  shlibpath_var=LD_LIBRARY_PATH
-  sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
-  sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
-  # the default ld.so.conf also contains /usr/contrib/lib and
-  # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
-  # libtool to hard-code these into programs
-  ;;
-
-cygwin* | mingw* | pw32*)
-  version_type=windows
-  shrext_cmds=".dll"
-  need_version=no
-  need_lib_prefix=no
 
-  case $GCC,$host_os in
-  yes,cygwin* | yes,mingw* | yes,pw32*)
-    library_names_spec='$libname.dll.a'
-    # DLL is installed to $(libdir)/../bin by postinstall_cmds
-    postinstall_cmds='base_file=`basename \${file}`~
-      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~
-      dldir=$destdir/`dirname \$dlpath`~
-      test -d \$dldir || mkdir -p \$dldir~
-      $install_prog $dir/$dlname \$dldir/$dlname~
-      chmod a+x \$dldir/$dlname'
-    postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
-      dlpath=$dir/\$dldll~
-       $rm \$dlpath'
-    shlibpath_overrides_runpath=yes
+    amigaos*)
+      case $host_cpu in
+      powerpc)
+            # see comment about AmigaOS4 .so support
+            lt_prog_compiler_pic_CXX='-fPIC'
+        ;;
+      m68k)
+            # FIXME: we need at least 68020 code to build shared libraries, but
+            # adding the `-m68020' flag to GCC prevents building anything better,
+            # like `-m68040'.
+            lt_prog_compiler_pic_CXX='-m68020 -resident32 -malways-restore-a4'
+        ;;
+      esac
+      ;;
 
-    case $host_os in
-    cygwin*)
-      # Cygwin DLLs use 'cyg' prefix rather than 'lib'
-      soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
-      sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib"
+    beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
+      # PIC is the default for these OSes.
       ;;
-    mingw*)
-      # MinGW DLLs use traditional 'lib' prefix
-      soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
-      sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
-      if echo "$sys_lib_search_path_spec" | grep ';[c-zC-Z]:/' >/dev/null; then
-        # It is most probably a Windows format PATH printed by
-        # mingw gcc, but we are running on Cygwin. Gcc prints its search
-        # path with ; separators, and with drive letters. We can handle the
-        # drive letters (cygwin fileutils understands them), so leave them,
-        # especially as we might pass files found there to a mingw objdump,
-        # which wouldn't understand a cygwinified path. Ahh.
-        sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
-      else
-        sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED  -e "s/$PATH_SEPARATOR/ /g"`
-      fi
+    mingw* | cygwin* | os2* | pw32* | cegcc*)
+      # This hack is so that the source file can tell whether it is being
+      # built for inclusion in a dll (and should export symbols for example).
+      # Although the cygwin gcc ignores -fPIC, still need this for old-style
+      # (--disable-auto-import) libraries
+      lt_prog_compiler_pic_CXX='-DDLL_EXPORT'
       ;;
-    pw32*)
-      # pw32 DLLs use 'pw' prefix rather than 'lib'
-      library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+    darwin* | rhapsody*)
+      # PIC is the default on this platform
+      # Common symbols not allowed in MH_DYLIB files
+      lt_prog_compiler_pic_CXX='-fno-common'
       ;;
-    esac
-    ;;
-
-  *)
-    library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib'
-    ;;
-  esac
-  dynamic_linker='Win32 ld.exe'
-  # FIXME: first we should search . and the directory the executable is in
-  shlibpath_var=PATH
-  ;;
-
-darwin* | rhapsody*)
-  dynamic_linker="$host_os dyld"
-  version_type=darwin
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext'
-  soname_spec='${libname}${release}${major}$shared_ext'
-  shlibpath_overrides_runpath=yes
-  shlibpath_var=DYLD_LIBRARY_PATH
-  shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
-
-  sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
-  ;;
-
-dgux*)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  ;;
-
-freebsd1*)
-  dynamic_linker=no
-  ;;
-
-freebsd* | dragonfly*)
-  # DragonFly does not have aout.  When/if they implement a new
-  # versioning mechanism, adjust this.
-  if test -x /usr/bin/objformat; then
-    objformat=`/usr/bin/objformat`
-  else
-    case $host_os in
-    freebsd[123]*) objformat=aout ;;
-    *) objformat=elf ;;
-    esac
-  fi
-  version_type=freebsd-$objformat
-  case $version_type in
-    freebsd-elf*)
-      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
-      need_version=no
-      need_lib_prefix=no
+    *djgpp*)
+      # DJGPP does not support shared libraries at all
+      lt_prog_compiler_pic_CXX=
       ;;
-    freebsd-*)
-      library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
-      need_version=yes
+    interix[3-9]*)
+      # Interix 3.x gcc -fpic/-fPIC options generate broken code.
+      # Instead, we relocate shared libraries at runtime.
+      ;;
+    sysv4*MP*)
+      if test -d /usr/nec; then
+	lt_prog_compiler_pic_CXX=-Kconform_pic
+      fi
+      ;;
+    hpux*)
+      # PIC is the default for 64-bit PA HP-UX, but not for 32-bit
+      # PA HP-UX.  On IA64 HP-UX, PIC is the default but the pic flag
+      # sets the default TLS model and affects inlining.
+      case $host_cpu in
+      hppa*64*)
+	;;
+      *)
+	lt_prog_compiler_pic_CXX='-fPIC'
+	;;
+      esac
+      ;;
+    *qnx* | *nto*)
+      # QNX uses GNU C++, but need to define -shared option too, otherwise
+      # it will coredump.
+      lt_prog_compiler_pic_CXX='-fPIC -shared'
       ;;
-  esac
-  shlibpath_var=LD_LIBRARY_PATH
-  case $host_os in
-  freebsd2*)
-    shlibpath_overrides_runpath=yes
-    ;;
-  freebsd3.[01]* | freebsdelf3.[01]*)
-    shlibpath_overrides_runpath=yes
-    hardcode_into_libs=yes
-    ;;
-  freebsd3.[2-9]* | freebsdelf3.[2-9]* | \
-  freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1)
-    shlibpath_overrides_runpath=no
-    hardcode_into_libs=yes
-    ;;
-  *) # from 4.6 on, and DragonFly
-    shlibpath_overrides_runpath=yes
-    hardcode_into_libs=yes
-    ;;
-  esac
-  ;;
-
-gnu*)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  hardcode_into_libs=yes
-  ;;
-
-hpux9* | hpux10* | hpux11*)
-  # Give a soname corresponding to the major version so that dld.sl refuses to
-  # link against other versions.
-  version_type=sunos
-  need_lib_prefix=no
-  need_version=no
-  case $host_cpu in
-  ia64*)
-    shrext_cmds='.so'
-    hardcode_into_libs=yes
-    dynamic_linker="$host_os dld.so"
-    shlibpath_var=LD_LIBRARY_PATH
-    shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
-    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-    soname_spec='${libname}${release}${shared_ext}$major'
-    if test "X$HPUX_IA64_MODE" = X32; then
-      sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
-    else
-      sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
-    fi
-    sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
-    ;;
-   hppa*64*)
-     shrext_cmds='.sl'
-     hardcode_into_libs=yes
-     dynamic_linker="$host_os dld.sl"
-     shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
-     shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
-     library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-     soname_spec='${libname}${release}${shared_ext}$major'
-     sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
-     sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
-     ;;
-   *)
-    shrext_cmds='.sl'
-    dynamic_linker="$host_os dld.sl"
-    shlibpath_var=SHLIB_PATH
-    shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
-    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-    soname_spec='${libname}${release}${shared_ext}$major'
-    ;;
-  esac
-  # HP-UX runs *really* slowly unless shared libraries are mode 555.
-  postinstall_cmds='chmod 555 $lib'
-  ;;
-
-interix[3-9]*)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=no
-  hardcode_into_libs=yes
-  ;;
-
-irix5* | irix6* | nonstopux*)
-  case $host_os in
-    nonstopux*) version_type=nonstopux ;;
     *)
-	if test "$lt_cv_prog_gnu_ld" = yes; then
-		version_type=linux
-	else
-		version_type=irix
-	fi ;;
-  esac
-  need_lib_prefix=no
-  need_version=no
-  soname_spec='${libname}${release}${shared_ext}$major'
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
-  case $host_os in
-  irix5* | nonstopux*)
-    libsuff= shlibsuff=
-    ;;
-  *)
-    case $LD in # libtool.m4 will add one of these switches to LD
-    *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
-      libsuff= shlibsuff= libmagic=32-bit;;
-    *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
-      libsuff=32 shlibsuff=N32 libmagic=N32;;
-    *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
-      libsuff=64 shlibsuff=64 libmagic=64-bit;;
-    *) libsuff= shlibsuff= libmagic=never-match;;
+      lt_prog_compiler_pic_CXX='-fPIC'
+      ;;
     esac
-    ;;
-  esac
-  shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
-  shlibpath_overrides_runpath=no
-  sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
-  sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
-  hardcode_into_libs=yes
-  ;;
-
-# No shared lib support for Linux oldld, aout, or coff.
-linux*oldld* | linux*aout* | linux*coff*)
-  dynamic_linker=no
-  ;;
-
-# This must be Linux ELF.
-linux* | k*bsd*-gnu)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=no
-  # This implies no fast_install, which is unacceptable.
-  # Some rework will be needed to allow for fast_install
-  # before this can be enabled.
-  hardcode_into_libs=yes
-
-  # find out which ABI we are using
-  libsuff=
-  case "$host_cpu" in
-  x86_64*|s390x*|powerpc64*)
-    echo '#line 20499 "configure"' > conftest.$ac_ext
-    if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
-  ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; then
-      case `/usr/bin/file conftest.$ac_objext` in
-      *64-bit*)
-        libsuff=64
-        ;;
-      esac
-    fi
-    rm -rf conftest*
-    ;;
-  esac
-
-  sys_lib_dlsearch_path_spec="/lib${libsuff} /usr/lib${libsuff}"
-
-  # Append ld.so.conf contents to the search path
-  if test -f /etc/ld.so.conf; then
-    lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ 	]*hwcap[ 	]/d;s/[:,	]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
-    sys_lib_dlsearch_path_spec="$sys_lib_dlsearch_path_spec $lt_ld_extra"
-  fi
-
-  # We used to test for /lib/ld.so.1 and disable shared libraries on
-  # powerpc, because MkLinux only supported shared libraries with the
-  # GNU dynamic linker.  Since this was broken with cross compilers,
-  # most powerpc-linux boxes support dynamic linking these days and
-  # people can always --disable-shared, the test was removed, and we
-  # assume the GNU/Linux dynamic linker is in use.
-  dynamic_linker='GNU/Linux ld.so'
-  ;;
-
-netbsd*)
-  version_type=sunos
-  need_lib_prefix=no
-  need_version=no
-  if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
-    finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
-    dynamic_linker='NetBSD (a.out) ld.so'
   else
-    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
-    soname_spec='${libname}${release}${shared_ext}$major'
-    dynamic_linker='NetBSD ld.elf_so'
-  fi
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
-  hardcode_into_libs=yes
-  ;;
-
-newsos6)
-  version_type=linux
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
-  ;;
-
-nto-qnx*)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
-  ;;
-
-openbsd*)
-  version_type=sunos
-  sys_lib_dlsearch_path_spec="/usr/lib"
-  need_lib_prefix=no
-  # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
-  case $host_os in
-    openbsd3.3 | openbsd3.3.*) need_version=yes ;;
-    *)                         need_version=no  ;;
-  esac
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
-  finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
-  shlibpath_var=LD_LIBRARY_PATH
-  if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
     case $host_os in
-      openbsd2.[89] | openbsd2.[89].*)
-	shlibpath_overrides_runpath=no
+      aix[4-9]*)
+	# All AIX code is PIC.
+	if test "$host_cpu" = ia64; then
+	  # AIX 5 now supports IA64 processor
+	  lt_prog_compiler_static_CXX='-Bstatic'
+	else
+	  lt_prog_compiler_static_CXX='-bnso -bI:/lib/syscalls.exp'
+	fi
+	;;
+      chorus*)
+	case $cc_basename in
+	cxch68*)
+	  # Green Hills C++ Compiler
+	  # _LT_TAGVAR(lt_prog_compiler_static, CXX)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a"
+	  ;;
+	esac
+	;;
+      dgux*)
+	case $cc_basename in
+	  ec++*)
+	    lt_prog_compiler_pic_CXX='-KPIC'
+	    ;;
+	  ghcx*)
+	    # Green Hills C++ Compiler
+	    lt_prog_compiler_pic_CXX='-pic'
+	    ;;
+	  *)
+	    ;;
+	esac
+	;;
+      freebsd* | dragonfly*)
+	# FreeBSD uses GNU C++
+	;;
+      hpux9* | hpux10* | hpux11*)
+	case $cc_basename in
+	  CC*)
+	    lt_prog_compiler_wl_CXX='-Wl,'
+	    lt_prog_compiler_static_CXX='${wl}-a ${wl}archive'
+	    if test "$host_cpu" != ia64; then
+	      lt_prog_compiler_pic_CXX='+Z'
+	    fi
+	    ;;
+	  aCC*)
+	    lt_prog_compiler_wl_CXX='-Wl,'
+	    lt_prog_compiler_static_CXX='${wl}-a ${wl}archive'
+	    case $host_cpu in
+	    hppa*64*|ia64*)
+	      # +Z the default
+	      ;;
+	    *)
+	      lt_prog_compiler_pic_CXX='+Z'
+	      ;;
+	    esac
+	    ;;
+	  *)
+	    ;;
+	esac
+	;;
+      interix*)
+	# This is c89, which is MS Visual C++ (no shared libs)
+	# Anyone wants to do a port?
+	;;
+      irix5* | irix6* | nonstopux*)
+	case $cc_basename in
+	  CC*)
+	    lt_prog_compiler_wl_CXX='-Wl,'
+	    lt_prog_compiler_static_CXX='-non_shared'
+	    # CC pic flag -KPIC is the default.
+	    ;;
+	  *)
+	    ;;
+	esac
+	;;
+      linux* | k*bsd*-gnu)
+	case $cc_basename in
+	  KCC*)
+	    # KAI C++ Compiler
+	    lt_prog_compiler_wl_CXX='--backend -Wl,'
+	    lt_prog_compiler_pic_CXX='-fPIC'
+	    ;;
+	  ecpc* )
+	    # old Intel C++ for x86_64 which still supported -KPIC.
+	    lt_prog_compiler_wl_CXX='-Wl,'
+	    lt_prog_compiler_pic_CXX='-KPIC'
+	    lt_prog_compiler_static_CXX='-static'
+	    ;;
+	  icpc* )
+	    # Intel C++, used to be incompatible with GCC.
+	    # ICC 10 doesn't accept -KPIC any more.
+	    lt_prog_compiler_wl_CXX='-Wl,'
+	    lt_prog_compiler_pic_CXX='-fPIC'
+	    lt_prog_compiler_static_CXX='-static'
+	    ;;
+	  pgCC* | pgcpp*)
+	    # Portland Group C++ compiler
+	    lt_prog_compiler_wl_CXX='-Wl,'
+	    lt_prog_compiler_pic_CXX='-fpic'
+	    lt_prog_compiler_static_CXX='-Bstatic'
+	    ;;
+	  cxx*)
+	    # Compaq C++
+	    # Make sure the PIC flag is empty.  It appears that all Alpha
+	    # Linux and Compaq Tru64 Unix objects are PIC.
+	    lt_prog_compiler_pic_CXX=
+	    lt_prog_compiler_static_CXX='-non_shared'
+	    ;;
+	  xlc* | xlC*)
+	    # IBM XL 8.0 on PPC
+	    lt_prog_compiler_wl_CXX='-Wl,'
+	    lt_prog_compiler_pic_CXX='-qpic'
+	    lt_prog_compiler_static_CXX='-qstaticlink'
+	    ;;
+	  *)
+	    case `$CC -V 2>&1 | sed 5q` in
+	    *Sun\ C*)
+	      # Sun C++ 5.9
+	      lt_prog_compiler_pic_CXX='-KPIC'
+	      lt_prog_compiler_static_CXX='-Bstatic'
+	      lt_prog_compiler_wl_CXX='-Qoption ld '
+	      ;;
+	    esac
+	    ;;
+	esac
+	;;
+      lynxos*)
+	;;
+      m88k*)
+	;;
+      mvs*)
+	case $cc_basename in
+	  cxx*)
+	    lt_prog_compiler_pic_CXX='-W c,exportall'
+	    ;;
+	  *)
+	    ;;
+	esac
+	;;
+      netbsd* | netbsdelf*-gnu)
+	;;
+      *qnx* | *nto*)
+        # QNX uses GNU C++, but need to define -shared option too, otherwise
+        # it will coredump.
+        lt_prog_compiler_pic_CXX='-fPIC -shared'
+        ;;
+      osf3* | osf4* | osf5*)
+	case $cc_basename in
+	  KCC*)
+	    lt_prog_compiler_wl_CXX='--backend -Wl,'
+	    ;;
+	  RCC*)
+	    # Rational C++ 2.4.1
+	    lt_prog_compiler_pic_CXX='-pic'
+	    ;;
+	  cxx*)
+	    # Digital/Compaq C++
+	    lt_prog_compiler_wl_CXX='-Wl,'
+	    # Make sure the PIC flag is empty.  It appears that all Alpha
+	    # Linux and Compaq Tru64 Unix objects are PIC.
+	    lt_prog_compiler_pic_CXX=
+	    lt_prog_compiler_static_CXX='-non_shared'
+	    ;;
+	  *)
+	    ;;
+	esac
+	;;
+      psos*)
+	;;
+      solaris*)
+	case $cc_basename in
+	  CC*)
+	    # Sun C++ 4.2, 5.x and Centerline C++
+	    lt_prog_compiler_pic_CXX='-KPIC'
+	    lt_prog_compiler_static_CXX='-Bstatic'
+	    lt_prog_compiler_wl_CXX='-Qoption ld '
+	    ;;
+	  gcx*)
+	    # Green Hills C++ Compiler
+	    lt_prog_compiler_pic_CXX='-PIC'
+	    ;;
+	  *)
+	    ;;
+	esac
+	;;
+      sunos4*)
+	case $cc_basename in
+	  CC*)
+	    # Sun C++ 4.x
+	    lt_prog_compiler_pic_CXX='-pic'
+	    lt_prog_compiler_static_CXX='-Bstatic'
+	    ;;
+	  lcc*)
+	    # Lucid
+	    lt_prog_compiler_pic_CXX='-pic'
+	    ;;
+	  *)
+	    ;;
+	esac
+	;;
+      sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
+	case $cc_basename in
+	  CC*)
+	    lt_prog_compiler_wl_CXX='-Wl,'
+	    lt_prog_compiler_pic_CXX='-KPIC'
+	    lt_prog_compiler_static_CXX='-Bstatic'
+	    ;;
+	esac
 	;;
-      *)
-	shlibpath_overrides_runpath=yes
+      tandem*)
+	case $cc_basename in
+	  NCC*)
+	    # NonStop-UX NCC 3.20
+	    lt_prog_compiler_pic_CXX='-KPIC'
+	    ;;
+	  *)
+	    ;;
+	esac
 	;;
-      esac
-  else
-    shlibpath_overrides_runpath=yes
-  fi
-  ;;
-
-os2*)
-  libname_spec='$name'
-  shrext_cmds=".dll"
-  need_lib_prefix=no
-  library_names_spec='$libname${shared_ext} $libname.a'
-  dynamic_linker='OS/2 ld.exe'
-  shlibpath_var=LIBPATH
-  ;;
-
-osf3* | osf4* | osf5*)
-  version_type=osf
-  need_lib_prefix=no
-  need_version=no
-  soname_spec='${libname}${release}${shared_ext}$major'
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  shlibpath_var=LD_LIBRARY_PATH
-  sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
-  sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
-  ;;
-
-rdos*)
-  dynamic_linker=no
-  ;;
-
-solaris*)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
-  hardcode_into_libs=yes
-  # ldd complains unless libraries are executable
-  postinstall_cmds='chmod +x $lib'
-  ;;
-
-sunos4*)
-  version_type=sunos
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
-  finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
-  if test "$with_gnu_ld" = yes; then
-    need_lib_prefix=no
-  fi
-  need_version=yes
-  ;;
-
-sysv4 | sysv4.3*)
-  version_type=linux
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  case $host_vendor in
-    sni)
-      shlibpath_overrides_runpath=no
-      need_lib_prefix=no
-      export_dynamic_flag_spec='${wl}-Blargedynsym'
-      runpath_var=LD_RUN_PATH
-      ;;
-    siemens)
-      need_lib_prefix=no
-      ;;
-    motorola)
-      need_lib_prefix=no
-      need_version=no
-      shlibpath_overrides_runpath=no
-      sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
-      ;;
-  esac
-  ;;
-
-sysv4*MP*)
-  if test -d /usr/nec ;then
-    version_type=linux
-    library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
-    soname_spec='$libname${shared_ext}.$major'
-    shlibpath_var=LD_LIBRARY_PATH
-  fi
-  ;;
-
-sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
-  version_type=freebsd-elf
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  hardcode_into_libs=yes
-  if test "$with_gnu_ld" = yes; then
-    sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
-    shlibpath_overrides_runpath=no
-  else
-    sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
-    shlibpath_overrides_runpath=yes
-    case $host_os in
-      sco3.2v5*)
-        sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
+      vxworks*)
+	;;
+      *)
+	lt_prog_compiler_can_build_shared_CXX=no
 	;;
     esac
   fi
-  sys_lib_dlsearch_path_spec='/usr/lib'
-  ;;
-
-uts4*)
-  version_type=linux
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  ;;
 
-*)
-  dynamic_linker=no
-  ;;
+case $host_os in
+  # For platforms which do not support PIC, -DPIC is meaningless:
+  *djgpp*)
+    lt_prog_compiler_pic_CXX=
+    ;;
+  *)
+    lt_prog_compiler_pic_CXX="$lt_prog_compiler_pic_CXX -DPIC"
+    ;;
 esac
-{ $as_echo "$as_me:$LINENO: result: $dynamic_linker" >&5
-$as_echo "$dynamic_linker" >&6; }
-test "$dynamic_linker" = no && can_build_shared=no
-
-if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
-  lt_cv_sys_lib_search_path_spec="$sys_lib_search_path_spec"
-fi
-
-sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec"
-if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
-  lt_cv_sys_lib_dlsearch_path_spec="$sys_lib_dlsearch_path_spec"
-fi
-
-sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec"
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_prog_compiler_pic_CXX" >&5
+$as_echo "$lt_prog_compiler_pic_CXX" >&6; }
 
-variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
-if test "$GCC" = yes; then
-  variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
-fi
 
-{ $as_echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5
-$as_echo_n "checking how to hardcode library paths into programs... " >&6; }
-hardcode_action_GCJ=
-if test -n "$hardcode_libdir_flag_spec_GCJ" || \
-   test -n "$runpath_var_GCJ" || \
-   test "X$hardcode_automatic_GCJ" = "Xyes" ; then
 
-  # We can hardcode non-existant directories.
-  if test "$hardcode_direct_GCJ" != no &&
-     # If the only mechanism to avoid hardcoding is shlibpath_var, we
-     # have to relink, otherwise we might link with an installed library
-     # when we should be linking with a yet-to-be-installed one
-     ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, GCJ)" != no &&
-     test "$hardcode_minus_L_GCJ" != no; then
-    # Linking always hardcodes the temporary library directory.
-    hardcode_action_GCJ=relink
-  else
-    # We can link without hardcoding, and we can hardcode nonexisting dirs.
-    hardcode_action_GCJ=immediate
-  fi
+#
+# Check to make sure the PIC flag actually works.
+#
+if test -n "$lt_prog_compiler_pic_CXX"; then
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler PIC flag $lt_prog_compiler_pic_CXX works" >&5
+$as_echo_n "checking if $compiler PIC flag $lt_prog_compiler_pic_CXX works... " >&6; }
+if test "${lt_cv_prog_compiler_pic_works_CXX+set}" = set; then :
+  $as_echo_n "(cached) " >&6
 else
-  # We cannot hardcode anything, or else we can only hardcode existing
-  # directories.
-  hardcode_action_GCJ=unsupported
-fi
-{ $as_echo "$as_me:$LINENO: result: $hardcode_action_GCJ" >&5
-$as_echo "$hardcode_action_GCJ" >&6; }
-
-if test "$hardcode_action_GCJ" = relink; then
-  # Fast installation is not supported
-  enable_fast_install=no
-elif test "$shlibpath_overrides_runpath" = yes ||
-     test "$enable_shared" = no; then
-  # Fast installation is not necessary
-  enable_fast_install=needless
-fi
-
-
-# The else clause should only fire when bootstrapping the
-# libtool distribution, otherwise you forgot to ship ltmain.sh
-# with your package, and you will get complaints that there are
-# no rules to generate ltmain.sh.
-if test -f "$ltmain"; then
-  # See if we are running on zsh, and set the options which allow our commands through
-  # without removal of \ escapes.
-  if test -n "${ZSH_VERSION+set}" ; then
-    setopt NO_GLOB_SUBST
-  fi
-  # Now quote all the things that may contain metacharacters while being
-  # careful not to overquote the AC_SUBSTed values.  We take copies of the
-  # variables and quote the copies for generation of the libtool script.
-  for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \
-    SED SHELL STRIP \
-    libname_spec library_names_spec soname_spec extract_expsyms_cmds \
-    old_striplib striplib file_magic_cmd finish_cmds finish_eval \
-    deplibs_check_method reload_flag reload_cmds need_locks \
-    lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \
-    lt_cv_sys_global_symbol_to_c_name_address \
-    sys_lib_search_path_spec sys_lib_dlsearch_path_spec \
-    old_postinstall_cmds old_postuninstall_cmds \
-    compiler_GCJ \
-    CC_GCJ \
-    LD_GCJ \
-    lt_prog_compiler_wl_GCJ \
-    lt_prog_compiler_pic_GCJ \
-    lt_prog_compiler_static_GCJ \
-    lt_prog_compiler_no_builtin_flag_GCJ \
-    export_dynamic_flag_spec_GCJ \
-    thread_safe_flag_spec_GCJ \
-    whole_archive_flag_spec_GCJ \
-    enable_shared_with_static_runtimes_GCJ \
-    old_archive_cmds_GCJ \
-    old_archive_from_new_cmds_GCJ \
-    predep_objects_GCJ \
-    postdep_objects_GCJ \
-    predeps_GCJ \
-    postdeps_GCJ \
-    compiler_lib_search_path_GCJ \
-    compiler_lib_search_dirs_GCJ \
-    archive_cmds_GCJ \
-    archive_expsym_cmds_GCJ \
-    postinstall_cmds_GCJ \
-    postuninstall_cmds_GCJ \
-    old_archive_from_expsyms_cmds_GCJ \
-    allow_undefined_flag_GCJ \
-    no_undefined_flag_GCJ \
-    export_symbols_cmds_GCJ \
-    hardcode_libdir_flag_spec_GCJ \
-    hardcode_libdir_flag_spec_ld_GCJ \
-    hardcode_libdir_separator_GCJ \
-    hardcode_automatic_GCJ \
-    module_cmds_GCJ \
-    module_expsym_cmds_GCJ \
-    lt_cv_prog_compiler_c_o_GCJ \
-    fix_srcfile_path_GCJ \
-    exclude_expsyms_GCJ \
-    include_expsyms_GCJ; do
-
-    case $var in
-    old_archive_cmds_GCJ | \
-    old_archive_from_new_cmds_GCJ | \
-    archive_cmds_GCJ | \
-    archive_expsym_cmds_GCJ | \
-    module_cmds_GCJ | \
-    module_expsym_cmds_GCJ | \
-    old_archive_from_expsyms_cmds_GCJ | \
-    export_symbols_cmds_GCJ | \
-    extract_expsyms_cmds | reload_cmds | finish_cmds | \
-    postinstall_cmds | postuninstall_cmds | \
-    old_postinstall_cmds | old_postuninstall_cmds | \
-    sys_lib_search_path_spec | sys_lib_dlsearch_path_spec)
-      # Double-quote double-evaled strings.
-      eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\""
-      ;;
-    *)
-      eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\""
-      ;;
-    esac
-  done
-
-  case $lt_echo in
-  *'\$0 --fallback-echo"')
-    lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'`
-    ;;
-  esac
-
-cfgfile="$ofile"
-
-  cat <<__EOF__ >> "$cfgfile"
-# ### BEGIN LIBTOOL TAG CONFIG: $tagname
-
-# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
-
-# Shell to use when invoking shell scripts.
-SHELL=$lt_SHELL
-
-# Whether or not to build shared libraries.
-build_libtool_libs=$enable_shared
-
-# Whether or not to build static libraries.
-build_old_libs=$enable_static
-
-# Whether or not to add -lc for building shared libraries.
-build_libtool_need_lc=$archive_cmds_need_lc_GCJ
-
-# Whether or not to disallow shared libs when runtime libs are static
-allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes_GCJ
-
-# Whether or not to optimize for fast installation.
-fast_install=$enable_fast_install
-
-# The host system.
-host_alias=$host_alias
-host=$host
-host_os=$host_os
-
-# The build system.
-build_alias=$build_alias
-build=$build
-build_os=$build_os
-
-# An echo program that does not interpret backslashes.
-echo=$lt_echo
-
-# The archiver.
-AR=$lt_AR
-AR_FLAGS=$lt_AR_FLAGS
-
-# A C compiler.
-LTCC=$lt_LTCC
-
-# LTCC compiler flags.
-LTCFLAGS=$lt_LTCFLAGS
-
-# A language-specific compiler.
-CC=$lt_compiler_GCJ
+  lt_cv_prog_compiler_pic_works_CXX=no
+   ac_outfile=conftest.$ac_objext
+   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+   lt_compiler_flag="$lt_prog_compiler_pic_CXX -DPIC"
+   # Insert the option either (1) after the last *FLAGS variable, or
+   # (2) before a word containing "conftest.", or (3) at the end.
+   # Note that $ac_compile itself does not contain backslashes and begins
+   # with a dollar sign (not a hyphen), so the echo should work correctly.
+   # The option is referenced via a variable to avoid confusing sed.
+   lt_compile=`echo "$ac_compile" | $SED \
+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+   -e 's:$: $lt_compiler_flag:'`
+   (eval echo "\"\$as_me:14560: $lt_compile\"" >&5)
+   (eval "$lt_compile" 2>conftest.err)
+   ac_status=$?
+   cat conftest.err >&5
+   echo "$as_me:14564: \$? = $ac_status" >&5
+   if (exit $ac_status) && test -s "$ac_outfile"; then
+     # The compiler can only warn and ignore the option if not recognized
+     # So say no if there are warnings other than the usual output.
+     $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
+     $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+     if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
+       lt_cv_prog_compiler_pic_works_CXX=yes
+     fi
+   fi
+   $RM conftest*
 
-# Is the compiler the GNU C compiler?
-with_gcc=$GCC_GCJ
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic_works_CXX" >&5
+$as_echo "$lt_cv_prog_compiler_pic_works_CXX" >&6; }
 
-# An ERE matcher.
-EGREP=$lt_EGREP
+if test x"$lt_cv_prog_compiler_pic_works_CXX" = xyes; then
+    case $lt_prog_compiler_pic_CXX in
+     "" | " "*) ;;
+     *) lt_prog_compiler_pic_CXX=" $lt_prog_compiler_pic_CXX" ;;
+     esac
+else
+    lt_prog_compiler_pic_CXX=
+     lt_prog_compiler_can_build_shared_CXX=no
+fi
 
-# The linker used to build libraries.
-LD=$lt_LD_GCJ
+fi
 
-# Whether we need hard or soft links.
-LN_S=$lt_LN_S
 
-# A BSD-compatible nm program.
-NM=$lt_NM
 
-# A symbol stripping program
-STRIP=$lt_STRIP
+#
+# Check to make sure the static flag actually works.
+#
+wl=$lt_prog_compiler_wl_CXX eval lt_tmp_static_flag=\"$lt_prog_compiler_static_CXX\"
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler static flag $lt_tmp_static_flag works" >&5
+$as_echo_n "checking if $compiler static flag $lt_tmp_static_flag works... " >&6; }
+if test "${lt_cv_prog_compiler_static_works_CXX+set}" = set; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_prog_compiler_static_works_CXX=no
+   save_LDFLAGS="$LDFLAGS"
+   LDFLAGS="$LDFLAGS $lt_tmp_static_flag"
+   echo "$lt_simple_link_test_code" > conftest.$ac_ext
+   if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
+     # The linker can only warn and ignore the option if not recognized
+     # So say no if there are warnings
+     if test -s conftest.err; then
+       # Append any errors to the config.log.
+       cat conftest.err 1>&5
+       $ECHO "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp
+       $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+       if diff conftest.exp conftest.er2 >/dev/null; then
+         lt_cv_prog_compiler_static_works_CXX=yes
+       fi
+     else
+       lt_cv_prog_compiler_static_works_CXX=yes
+     fi
+   fi
+   $RM -r conftest*
+   LDFLAGS="$save_LDFLAGS"
 
-# Used to examine libraries when file_magic_cmd begins "file"
-MAGIC_CMD=$MAGIC_CMD
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_static_works_CXX" >&5
+$as_echo "$lt_cv_prog_compiler_static_works_CXX" >&6; }
 
-# Used on cygwin: DLL creation program.
-DLLTOOL="$DLLTOOL"
+if test x"$lt_cv_prog_compiler_static_works_CXX" = xyes; then
+    :
+else
+    lt_prog_compiler_static_CXX=
+fi
 
-# Used on cygwin: object dumper.
-OBJDUMP="$OBJDUMP"
 
-# Used on cygwin: assembler.
-AS="$AS"
 
-# The name of the directory that contains temporary libtool files.
-objdir=$objdir
 
-# How to create reloadable object files.
-reload_flag=$lt_reload_flag
-reload_cmds=$lt_reload_cmds
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5
+$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; }
+if test "${lt_cv_prog_compiler_c_o_CXX+set}" = set; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_prog_compiler_c_o_CXX=no
+   $RM -r conftest 2>/dev/null
+   mkdir conftest
+   cd conftest
+   mkdir out
+   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
 
-# How to pass a linker flag through the compiler.
-wl=$lt_lt_prog_compiler_wl_GCJ
+   lt_compiler_flag="-o out/conftest2.$ac_objext"
+   # Insert the option either (1) after the last *FLAGS variable, or
+   # (2) before a word containing "conftest.", or (3) at the end.
+   # Note that $ac_compile itself does not contain backslashes and begins
+   # with a dollar sign (not a hyphen), so the echo should work correctly.
+   lt_compile=`echo "$ac_compile" | $SED \
+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+   -e 's:$: $lt_compiler_flag:'`
+   (eval echo "\"\$as_me:14659: $lt_compile\"" >&5)
+   (eval "$lt_compile" 2>out/conftest.err)
+   ac_status=$?
+   cat out/conftest.err >&5
+   echo "$as_me:14663: \$? = $ac_status" >&5
+   if (exit $ac_status) && test -s out/conftest2.$ac_objext
+   then
+     # The compiler can only warn and ignore the option if not recognized
+     # So say no if there are warnings
+     $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
+     $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
+     if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
+       lt_cv_prog_compiler_c_o_CXX=yes
+     fi
+   fi
+   chmod u+w . 2>&5
+   $RM conftest*
+   # SGI C++ compiler will create directory out/ii_files/ for
+   # template instantiation
+   test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files
+   $RM out/* && rmdir out
+   cd ..
+   $RM -r conftest
+   $RM conftest*
 
-# Object file suffix (normally "o").
-objext="$ac_objext"
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o_CXX" >&5
+$as_echo "$lt_cv_prog_compiler_c_o_CXX" >&6; }
 
-# Old archive suffix (normally "a").
-libext="$libext"
 
-# Shared library suffix (normally ".so").
-shrext_cmds='$shrext_cmds'
 
-# Executable file suffix (normally "").
-exeext="$exeext"
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5
+$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; }
+if test "${lt_cv_prog_compiler_c_o_CXX+set}" = set; then :
+  $as_echo_n "(cached) " >&6
+else
+  lt_cv_prog_compiler_c_o_CXX=no
+   $RM -r conftest 2>/dev/null
+   mkdir conftest
+   cd conftest
+   mkdir out
+   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
 
-# Additional compiler flags for building library objects.
-pic_flag=$lt_lt_prog_compiler_pic_GCJ
-pic_mode=$pic_mode
+   lt_compiler_flag="-o out/conftest2.$ac_objext"
+   # Insert the option either (1) after the last *FLAGS variable, or
+   # (2) before a word containing "conftest.", or (3) at the end.
+   # Note that $ac_compile itself does not contain backslashes and begins
+   # with a dollar sign (not a hyphen), so the echo should work correctly.
+   lt_compile=`echo "$ac_compile" | $SED \
+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+   -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+   -e 's:$: $lt_compiler_flag:'`
+   (eval echo "\"\$as_me:14711: $lt_compile\"" >&5)
+   (eval "$lt_compile" 2>out/conftest.err)
+   ac_status=$?
+   cat out/conftest.err >&5
+   echo "$as_me:14715: \$? = $ac_status" >&5
+   if (exit $ac_status) && test -s out/conftest2.$ac_objext
+   then
+     # The compiler can only warn and ignore the option if not recognized
+     # So say no if there are warnings
+     $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
+     $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
+     if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
+       lt_cv_prog_compiler_c_o_CXX=yes
+     fi
+   fi
+   chmod u+w . 2>&5
+   $RM conftest*
+   # SGI C++ compiler will create directory out/ii_files/ for
+   # template instantiation
+   test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files
+   $RM out/* && rmdir out
+   cd ..
+   $RM -r conftest
+   $RM conftest*
 
-# What is the maximum length of a command?
-max_cmd_len=$lt_cv_sys_max_cmd_len
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o_CXX" >&5
+$as_echo "$lt_cv_prog_compiler_c_o_CXX" >&6; }
 
-# Does compiler simultaneously support -c and -o options?
-compiler_c_o=$lt_lt_cv_prog_compiler_c_o_GCJ
 
-# Must we lock files when doing compilation?
-need_locks=$lt_need_locks
 
-# Do we need the lib prefix for modules?
-need_lib_prefix=$need_lib_prefix
 
-# Do we need a version for libraries?
-need_version=$need_version
+hard_links="nottested"
+if test "$lt_cv_prog_compiler_c_o_CXX" = no && test "$need_locks" != no; then
+  # do not overwrite the value of need_locks provided by the user
+  { $as_echo "$as_me:${as_lineno-$LINENO}: checking if we can lock with hard links" >&5
+$as_echo_n "checking if we can lock with hard links... " >&6; }
+  hard_links=yes
+  $RM conftest*
+  ln conftest.a conftest.b 2>/dev/null && hard_links=no
+  touch conftest.a
+  ln conftest.a conftest.b 2>&5 || hard_links=no
+  ln conftest.a conftest.b 2>/dev/null && hard_links=no
+  { $as_echo "$as_me:${as_lineno-$LINENO}: result: $hard_links" >&5
+$as_echo "$hard_links" >&6; }
+  if test "$hard_links" = no; then
+    { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5
+$as_echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;}
+    need_locks=warn
+  fi
+else
+  need_locks=no
+fi
 
-# Whether dlopen is supported.
-dlopen_support=$enable_dlopen
 
-# Whether dlopen of programs is supported.
-dlopen_self=$enable_dlopen_self
 
-# Whether dlopen of statically linked programs is supported.
-dlopen_self_static=$enable_dlopen_self_static
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $compiler linker ($LD) supports shared libraries" >&5
+$as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; }
 
-# Compiler flag to prevent dynamic linking.
-link_static_flag=$lt_lt_prog_compiler_static_GCJ
+  export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+  case $host_os in
+  aix[4-9]*)
+    # If we're using GNU nm, then we don't want the "-C" option.
+    # -C means demangle to AIX nm, but means don't demangle with GNU nm
+    if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
+      export_symbols_cmds_CXX='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+    else
+      export_symbols_cmds_CXX='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+    fi
+    ;;
+  pw32*)
+    export_symbols_cmds_CXX="$ltdll_cmds"
+  ;;
+  cygwin* | mingw* | cegcc*)
+    export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/;/^.*[ ]__nm__/s/^.*[ ]__nm__\([^ ]*\)[ ][^ ]*/\1 DATA/;/^I[ ]/d;/^[AITW][ ]/s/.* //'\'' | sort | uniq > $export_symbols'
+  ;;
+  linux* | k*bsd*-gnu)
+    link_all_deplibs_CXX=no
+  ;;
+  *)
+    export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+  ;;
+  esac
+  exclude_expsyms_CXX='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'
 
-# Compiler flag to turn off builtin functions.
-no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_GCJ
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ld_shlibs_CXX" >&5
+$as_echo "$ld_shlibs_CXX" >&6; }
+test "$ld_shlibs_CXX" = no && can_build_shared=no
 
-# Compiler flag to allow reflexive dlopens.
-export_dynamic_flag_spec=$lt_export_dynamic_flag_spec_GCJ
+with_gnu_ld_CXX=$with_gnu_ld
 
-# Compiler flag to generate shared objects directly from archives.
-whole_archive_flag_spec=$lt_whole_archive_flag_spec_GCJ
 
-# Compiler flag to generate thread-safe objects.
-thread_safe_flag_spec=$lt_thread_safe_flag_spec_GCJ
 
-# Library versioning type.
-version_type=$version_type
 
-# Format of library name prefix.
-libname_spec=$lt_libname_spec
 
-# List of archive names.  First name is the real one, the rest are links.
-# The last name is the one that the linker finds with -lNAME.
-library_names_spec=$lt_library_names_spec
 
-# The coded name of the library, if different from the real name.
-soname_spec=$lt_soname_spec
+#
+# Do we need to explicitly link libc?
+#
+case "x$archive_cmds_need_lc_CXX" in
+x|xyes)
+  # Assume -lc should be added
+  archive_cmds_need_lc_CXX=yes
 
-# Commands used to build and install an old-style archive.
-RANLIB=$lt_RANLIB
-old_archive_cmds=$lt_old_archive_cmds_GCJ
-old_postinstall_cmds=$lt_old_postinstall_cmds
-old_postuninstall_cmds=$lt_old_postuninstall_cmds
+  if test "$enable_shared" = yes && test "$GCC" = yes; then
+    case $archive_cmds_CXX in
+    *'~'*)
+      # FIXME: we may have to deal with multi-command sequences.
+      ;;
+    '$CC '*)
+      # Test whether the compiler implicitly links with -lc since on some
+      # systems, -lgcc has to come before -lc. If gcc already passes -lc
+      # to ld, don't add -lc before -lgcc.
+      { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether -lc should be explicitly linked in" >&5
+$as_echo_n "checking whether -lc should be explicitly linked in... " >&6; }
+      $RM conftest*
+      echo "$lt_simple_compile_test_code" > conftest.$ac_ext
 
-# Create an old-style archive from a shared archive.
-old_archive_from_new_cmds=$lt_old_archive_from_new_cmds_GCJ
+      if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+  (eval $ac_compile) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; } 2>conftest.err; then
+        soname=conftest
+        lib=conftest
+        libobjs=conftest.$ac_objext
+        deplibs=
+        wl=$lt_prog_compiler_wl_CXX
+	pic_flag=$lt_prog_compiler_pic_CXX
+        compiler_flags=-v
+        linker_flags=-v
+        verstring=
+        output_objdir=.
+        libname=conftest
+        lt_save_allow_undefined_flag=$allow_undefined_flag_CXX
+        allow_undefined_flag_CXX=
+        if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$archive_cmds_CXX 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1\""; } >&5
+  (eval $archive_cmds_CXX 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) 2>&5
+  ac_status=$?
+  $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+  test $ac_status = 0; }
+        then
+	  archive_cmds_need_lc_CXX=no
+        else
+	  archive_cmds_need_lc_CXX=yes
+        fi
+        allow_undefined_flag_CXX=$lt_save_allow_undefined_flag
+      else
+        cat conftest.err 1>&5
+      fi
+      $RM conftest*
+      { $as_echo "$as_me:${as_lineno-$LINENO}: result: $archive_cmds_need_lc_CXX" >&5
+$as_echo "$archive_cmds_need_lc_CXX" >&6; }
+      ;;
+    esac
+  fi
+  ;;
+esac
 
-# Create a temporary old-style archive to link instead of a shared archive.
-old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds_GCJ
 
-# Commands used to build and install a shared archive.
-archive_cmds=$lt_archive_cmds_GCJ
-archive_expsym_cmds=$lt_archive_expsym_cmds_GCJ
-postinstall_cmds=$lt_postinstall_cmds
-postuninstall_cmds=$lt_postuninstall_cmds
 
-# Commands used to build a loadable module (assumed same as above if empty)
-module_cmds=$lt_module_cmds_GCJ
-module_expsym_cmds=$lt_module_expsym_cmds_GCJ
 
-# Commands to strip libraries.
-old_striplib=$lt_old_striplib
-striplib=$lt_striplib
 
-# Dependencies to place before the objects being linked to create a
-# shared library.
-predep_objects=$lt_predep_objects_GCJ
-
-# Dependencies to place after the objects being linked to create a
-# shared library.
-postdep_objects=$lt_postdep_objects_GCJ
-
-# Dependencies to place before the objects being linked to create a
-# shared library.
-predeps=$lt_predeps_GCJ
-
-# Dependencies to place after the objects being linked to create a
-# shared library.
-postdeps=$lt_postdeps_GCJ
-
-# The directories searched by this compiler when creating a shared
-# library
-compiler_lib_search_dirs=$lt_compiler_lib_search_dirs_GCJ
 
-# The library search path used internally by the compiler when linking
-# a shared library.
-compiler_lib_search_path=$lt_compiler_lib_search_path_GCJ
 
-# Method to check whether dependent libraries are shared objects.
-deplibs_check_method=$lt_deplibs_check_method
 
-# Command to use when deplibs_check_method == file_magic.
-file_magic_cmd=$lt_file_magic_cmd
 
-# Flag that allows shared libraries with undefined symbols to be built.
-allow_undefined_flag=$lt_allow_undefined_flag_GCJ
 
-# Flag that forces no undefined symbols.
-no_undefined_flag=$lt_no_undefined_flag_GCJ
 
-# Commands used to finish a libtool library installation in a directory.
-finish_cmds=$lt_finish_cmds
 
-# Same as above, but a single script fragment to be evaled but not shown.
-finish_eval=$lt_finish_eval
 
-# Take the output of nm and produce a listing of raw symbols and C names.
-global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe
 
-# Transform the output of nm in a proper C declaration
-global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl
 
-# Transform the output of nm in a C name address pair
-global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
 
-# This is the shared library runtime path variable.
-runpath_var=$runpath_var
 
-# This is the shared library path variable.
-shlibpath_var=$shlibpath_var
 
-# Is shlibpath searched before the hard-coded library search path?
-shlibpath_overrides_runpath=$shlibpath_overrides_runpath
 
-# How to hardcode a shared library path into an executable.
-hardcode_action=$hardcode_action_GCJ
 
-# Whether we should hardcode library paths into libraries.
-hardcode_into_libs=$hardcode_into_libs
 
-# Flag to hardcode \$libdir into a binary during linking.
-# This must work even if \$libdir does not exist.
-hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_GCJ
 
-# If ld is used when linking, flag to hardcode \$libdir into
-# a binary during linking. This must work even if \$libdir does
-# not exist.
-hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_GCJ
-
-# Whether we need a single -rpath flag with a separated argument.
-hardcode_libdir_separator=$lt_hardcode_libdir_separator_GCJ
-
-# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the
-# resulting binary.
-hardcode_direct=$hardcode_direct_GCJ
-
-# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
-# resulting binary.
-hardcode_minus_L=$hardcode_minus_L_GCJ
-
-# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into
-# the resulting binary.
-hardcode_shlibpath_var=$hardcode_shlibpath_var_GCJ
-
-# Set to yes if building a shared library automatically hardcodes DIR into the library
-# and all subsequent libraries and executables linked against it.
-hardcode_automatic=$hardcode_automatic_GCJ
 
-# Variables whose values should be saved in libtool wrapper scripts and
-# restored at relink time.
-variables_saved_for_relink="$variables_saved_for_relink"
 
-# Whether libtool must link a program against all its dependency libraries.
-link_all_deplibs=$link_all_deplibs_GCJ
 
-# Compile-time system search path for libraries
-sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
 
-# Run-time system search path for libraries
-sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
 
-# Fix the shell variable \$srcfile for the compiler.
-fix_srcfile_path=$lt_fix_srcfile_path
 
-# Set to yes if exported symbols are required.
-always_export_symbols=$always_export_symbols_GCJ
 
-# The commands to list exported symbols.
-export_symbols_cmds=$lt_export_symbols_cmds_GCJ
 
-# The commands to extract the exported symbol list from a shared archive.
-extract_expsyms_cmds=$lt_extract_expsyms_cmds
 
-# Symbols that should not be listed in the preloaded symbols.
-exclude_expsyms=$lt_exclude_expsyms_GCJ
 
-# Symbols that must always be exported.
-include_expsyms=$lt_include_expsyms_GCJ
 
-# ### END LIBTOOL TAG CONFIG: $tagname
 
-__EOF__
 
 
-else
-  # If there is no Makefile yet, we rely on a make rule to execute
-  # `config.status --recheck' to rerun these tests and create the
-  # libtool script then.
-  ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'`
-  if test -f "$ltmain_in"; then
-    test -f Makefile && make "$ltmain"
-  fi
-fi
 
 
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
 
-CC="$lt_save_CC"
 
-	else
-	  tagname=""
-	fi
-	;;
 
-      RC)
 
 
-# Source file extension for RC test sources.
-ac_ext=rc
 
-# Object file extension for compiled RC test sources.
-objext=o
-objext_RC=$objext
 
-# Code to be used in simple compile tests
-lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }'
 
-# Code to be used in simple link tests
-lt_simple_link_test_code="$lt_simple_compile_test_code"
 
-# ltmain only uses $CC for tagged configurations so make sure $CC is set.
 
-# If no C compiler was specified, use CC.
-LTCC=${LTCC-"$CC"}
 
-# If no C compiler flags were specified, use CFLAGS.
-LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
 
-# Allow CC to be a program name with arguments.
-compiler=$CC
 
 
-# save warnings/boilerplate of simple test code
-ac_outfile=conftest.$ac_objext
-echo "$lt_simple_compile_test_code" >conftest.$ac_ext
-eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
-_lt_compiler_boilerplate=`cat conftest.err`
-$rm conftest*
 
-ac_outfile=conftest.$ac_objext
-echo "$lt_simple_link_test_code" >conftest.$ac_ext
-eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
-_lt_linker_boilerplate=`cat conftest.err`
-$rm -r conftest*
 
 
-# Allow CC to be a program name with arguments.
-lt_save_CC="$CC"
-CC=${RC-"windres"}
-compiler=$CC
-compiler_RC=$CC
-for cc_temp in $compiler""; do
-  case $cc_temp in
-    compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
-    distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
-    \-*) ;;
-    *) break;;
-  esac
-done
-cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
 
-lt_cv_prog_compiler_c_o_RC=yes
 
-# The else clause should only fire when bootstrapping the
-# libtool distribution, otherwise you forgot to ship ltmain.sh
-# with your package, and you will get complaints that there are
-# no rules to generate ltmain.sh.
-if test -f "$ltmain"; then
-  # See if we are running on zsh, and set the options which allow our commands through
-  # without removal of \ escapes.
-  if test -n "${ZSH_VERSION+set}" ; then
-    setopt NO_GLOB_SUBST
-  fi
-  # Now quote all the things that may contain metacharacters while being
-  # careful not to overquote the AC_SUBSTed values.  We take copies of the
-  # variables and quote the copies for generation of the libtool script.
-  for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \
-    SED SHELL STRIP \
-    libname_spec library_names_spec soname_spec extract_expsyms_cmds \
-    old_striplib striplib file_magic_cmd finish_cmds finish_eval \
-    deplibs_check_method reload_flag reload_cmds need_locks \
-    lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \
-    lt_cv_sys_global_symbol_to_c_name_address \
-    sys_lib_search_path_spec sys_lib_dlsearch_path_spec \
-    old_postinstall_cmds old_postuninstall_cmds \
-    compiler_RC \
-    CC_RC \
-    LD_RC \
-    lt_prog_compiler_wl_RC \
-    lt_prog_compiler_pic_RC \
-    lt_prog_compiler_static_RC \
-    lt_prog_compiler_no_builtin_flag_RC \
-    export_dynamic_flag_spec_RC \
-    thread_safe_flag_spec_RC \
-    whole_archive_flag_spec_RC \
-    enable_shared_with_static_runtimes_RC \
-    old_archive_cmds_RC \
-    old_archive_from_new_cmds_RC \
-    predep_objects_RC \
-    postdep_objects_RC \
-    predeps_RC \
-    postdeps_RC \
-    compiler_lib_search_path_RC \
-    compiler_lib_search_dirs_RC \
-    archive_cmds_RC \
-    archive_expsym_cmds_RC \
-    postinstall_cmds_RC \
-    postuninstall_cmds_RC \
-    old_archive_from_expsyms_cmds_RC \
-    allow_undefined_flag_RC \
-    no_undefined_flag_RC \
-    export_symbols_cmds_RC \
-    hardcode_libdir_flag_spec_RC \
-    hardcode_libdir_flag_spec_ld_RC \
-    hardcode_libdir_separator_RC \
-    hardcode_automatic_RC \
-    module_cmds_RC \
-    module_expsym_cmds_RC \
-    lt_cv_prog_compiler_c_o_RC \
-    fix_srcfile_path_RC \
-    exclude_expsyms_RC \
-    include_expsyms_RC; do
-
-    case $var in
-    old_archive_cmds_RC | \
-    old_archive_from_new_cmds_RC | \
-    archive_cmds_RC | \
-    archive_expsym_cmds_RC | \
-    module_cmds_RC | \
-    module_expsym_cmds_RC | \
-    old_archive_from_expsyms_cmds_RC | \
-    export_symbols_cmds_RC | \
-    extract_expsyms_cmds | reload_cmds | finish_cmds | \
-    postinstall_cmds | postuninstall_cmds | \
-    old_postinstall_cmds | old_postuninstall_cmds | \
-    sys_lib_search_path_spec | sys_lib_dlsearch_path_spec)
-      # Double-quote double-evaled strings.
-      eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\""
-      ;;
-    *)
-      eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\""
-      ;;
-    esac
-  done
 
-  case $lt_echo in
-  *'\$0 --fallback-echo"')
-    lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'`
-    ;;
-  esac
 
-cfgfile="$ofile"
 
-  cat <<__EOF__ >> "$cfgfile"
-# ### BEGIN LIBTOOL TAG CONFIG: $tagname
 
-# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
 
-# Shell to use when invoking shell scripts.
-SHELL=$lt_SHELL
 
-# Whether or not to build shared libraries.
-build_libtool_libs=$enable_shared
 
-# Whether or not to build static libraries.
-build_old_libs=$enable_static
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking dynamic linker characteristics" >&5
+$as_echo_n "checking dynamic linker characteristics... " >&6; }
 
-# Whether or not to add -lc for building shared libraries.
-build_libtool_need_lc=$archive_cmds_need_lc_RC
+library_names_spec=
+libname_spec='lib$name'
+soname_spec=
+shrext_cmds=".so"
+postinstall_cmds=
+postuninstall_cmds=
+finish_cmds=
+finish_eval=
+shlibpath_var=
+shlibpath_overrides_runpath=unknown
+version_type=none
+dynamic_linker="$host_os ld.so"
+sys_lib_dlsearch_path_spec="/lib /usr/lib"
+need_lib_prefix=unknown
+hardcode_into_libs=no
 
-# Whether or not to disallow shared libs when runtime libs are static
-allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes_RC
+# when you set need_version to no, make sure it does not cause -set_version
+# flags to be left without arguments
+need_version=unknown
 
-# Whether or not to optimize for fast installation.
-fast_install=$enable_fast_install
+case $host_os in
+aix3*)
+  version_type=linux
+  library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
+  shlibpath_var=LIBPATH
 
-# The host system.
-host_alias=$host_alias
-host=$host
-host_os=$host_os
+  # AIX 3 has no versioning support, so we append a major version to the name.
+  soname_spec='${libname}${release}${shared_ext}$major'
+  ;;
 
-# The build system.
-build_alias=$build_alias
-build=$build
-build_os=$build_os
+aix[4-9]*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  hardcode_into_libs=yes
+  if test "$host_cpu" = ia64; then
+    # AIX 5 supports IA64
+    library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
+    shlibpath_var=LD_LIBRARY_PATH
+  else
+    # With GCC up to 2.95.x, collect2 would create an import file
+    # for dependence libraries.  The import file would start with
+    # the line `#! .'.  This would cause the generated library to
+    # depend on `.', always an invalid library.  This was fixed in
+    # development snapshots of GCC prior to 3.0.
+    case $host_os in
+      aix4 | aix4.[01] | aix4.[01].*)
+      if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
+	   echo ' yes '
+	   echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then
+	:
+      else
+	can_build_shared=no
+      fi
+      ;;
+    esac
+    # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
+    # soname into executable. Probably we can add versioning support to
+    # collect2, so additional links can be useful in future.
+    if test "$aix_use_runtimelinking" = yes; then
+      # If using run time linking (on AIX 4.2 or later) use lib<name>.so
+      # instead of lib<name>.a to let people know that these are not
+      # typical AIX shared libraries.
+      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    else
+      # We preserve .a as extension for shared libraries through AIX4.2
+      # and later when we are not doing run time linking.
+      library_names_spec='${libname}${release}.a $libname.a'
+      soname_spec='${libname}${release}${shared_ext}$major'
+    fi
+    shlibpath_var=LIBPATH
+  fi
+  ;;
 
-# An echo program that does not interpret backslashes.
-echo=$lt_echo
+amigaos*)
+  case $host_cpu in
+  powerpc)
+    # Since July 2007 AmigaOS4 officially supports .so libraries.
+    # When compiling the executable, add -use-dynld -Lsobjs: to the compileline.
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    ;;
+  m68k)
+    library_names_spec='$libname.ixlibrary $libname.a'
+    # Create ${libname}_ixlibrary.a entries in /sys/libs.
+    finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$ECHO "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
+    ;;
+  esac
+  ;;
 
-# The archiver.
-AR=$lt_AR
-AR_FLAGS=$lt_AR_FLAGS
+beos*)
+  library_names_spec='${libname}${shared_ext}'
+  dynamic_linker="$host_os ld.so"
+  shlibpath_var=LIBRARY_PATH
+  ;;
 
-# A C compiler.
-LTCC=$lt_LTCC
+bsdi[45]*)
+  version_type=linux
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
+  sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
+  # the default ld.so.conf also contains /usr/contrib/lib and
+  # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
+  # libtool to hard-code these into programs
+  ;;
 
-# LTCC compiler flags.
-LTCFLAGS=$lt_LTCFLAGS
+cygwin* | mingw* | pw32* | cegcc*)
+  version_type=windows
+  shrext_cmds=".dll"
+  need_version=no
+  need_lib_prefix=no
 
-# A language-specific compiler.
-CC=$lt_compiler_RC
+  case $GCC,$host_os in
+  yes,cygwin* | yes,mingw* | yes,pw32* | yes,cegcc*)
+    library_names_spec='$libname.dll.a'
+    # DLL is installed to $(libdir)/../bin by postinstall_cmds
+    postinstall_cmds='base_file=`basename \${file}`~
+      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
+      dldir=$destdir/`dirname \$dlpath`~
+      test -d \$dldir || mkdir -p \$dldir~
+      $install_prog $dir/$dlname \$dldir/$dlname~
+      chmod a+x \$dldir/$dlname~
+      if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then
+        eval '\''$striplib \$dldir/$dlname'\'' || exit \$?;
+      fi'
+    postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
+      dlpath=$dir/\$dldll~
+       $RM \$dlpath'
+    shlibpath_overrides_runpath=yes
 
-# Is the compiler the GNU C compiler?
-with_gcc=$GCC_RC
+    case $host_os in
+    cygwin*)
+      # Cygwin DLLs use 'cyg' prefix rather than 'lib'
+      soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+      sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib"
+      ;;
+    mingw* | cegcc*)
+      # MinGW DLLs use traditional 'lib' prefix
+      soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+      sys_lib_search_path_spec=`$CC -print-search-dirs | $GREP "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
+      if $ECHO "$sys_lib_search_path_spec" | $GREP ';[c-zC-Z]:/' >/dev/null; then
+        # It is most probably a Windows format PATH printed by
+        # mingw gcc, but we are running on Cygwin. Gcc prints its search
+        # path with ; separators, and with drive letters. We can handle the
+        # drive letters (cygwin fileutils understands them), so leave them,
+        # especially as we might pass files found there to a mingw objdump,
+        # which wouldn't understand a cygwinified path. Ahh.
+        sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
+      else
+        sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED  -e "s/$PATH_SEPARATOR/ /g"`
+      fi
+      ;;
+    pw32*)
+      # pw32 DLLs use 'pw' prefix rather than 'lib'
+      library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+      ;;
+    esac
+    ;;
 
-# An ERE matcher.
-EGREP=$lt_EGREP
+  *)
+    library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib'
+    ;;
+  esac
+  dynamic_linker='Win32 ld.exe'
+  # FIXME: first we should search . and the directory the executable is in
+  shlibpath_var=PATH
+  ;;
 
-# The linker used to build libraries.
-LD=$lt_LD_RC
+darwin* | rhapsody*)
+  dynamic_linker="$host_os dyld"
+  version_type=darwin
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext'
+  soname_spec='${libname}${release}${major}$shared_ext'
+  shlibpath_overrides_runpath=yes
+  shlibpath_var=DYLD_LIBRARY_PATH
+  shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
 
-# Whether we need hard or soft links.
-LN_S=$lt_LN_S
+  sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
+  ;;
 
-# A BSD-compatible nm program.
-NM=$lt_NM
+dgux*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  ;;
 
-# A symbol stripping program
-STRIP=$lt_STRIP
+freebsd1*)
+  dynamic_linker=no
+  ;;
 
-# Used to examine libraries when file_magic_cmd begins "file"
-MAGIC_CMD=$MAGIC_CMD
+freebsd* | dragonfly*)
+  # DragonFly does not have aout.  When/if they implement a new
+  # versioning mechanism, adjust this.
+  if test -x /usr/bin/objformat; then
+    objformat=`/usr/bin/objformat`
+  else
+    case $host_os in
+    freebsd[123]*) objformat=aout ;;
+    *) objformat=elf ;;
+    esac
+  fi
+  version_type=freebsd-$objformat
+  case $version_type in
+    freebsd-elf*)
+      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
+      need_version=no
+      need_lib_prefix=no
+      ;;
+    freebsd-*)
+      library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
+      need_version=yes
+      ;;
+  esac
+  shlibpath_var=LD_LIBRARY_PATH
+  case $host_os in
+  freebsd2*)
+    shlibpath_overrides_runpath=yes
+    ;;
+  freebsd3.[01]* | freebsdelf3.[01]*)
+    shlibpath_overrides_runpath=yes
+    hardcode_into_libs=yes
+    ;;
+  freebsd3.[2-9]* | freebsdelf3.[2-9]* | \
+  freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1)
+    shlibpath_overrides_runpath=no
+    hardcode_into_libs=yes
+    ;;
+  *) # from 4.6 on, and DragonFly
+    shlibpath_overrides_runpath=yes
+    hardcode_into_libs=yes
+    ;;
+  esac
+  ;;
 
-# Used on cygwin: DLL creation program.
-DLLTOOL="$DLLTOOL"
+gnu*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  hardcode_into_libs=yes
+  ;;
 
-# Used on cygwin: object dumper.
-OBJDUMP="$OBJDUMP"
+hpux9* | hpux10* | hpux11*)
+  # Give a soname corresponding to the major version so that dld.sl refuses to
+  # link against other versions.
+  version_type=sunos
+  need_lib_prefix=no
+  need_version=no
+  case $host_cpu in
+  ia64*)
+    shrext_cmds='.so'
+    hardcode_into_libs=yes
+    dynamic_linker="$host_os dld.so"
+    shlibpath_var=LD_LIBRARY_PATH
+    shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    soname_spec='${libname}${release}${shared_ext}$major'
+    if test "X$HPUX_IA64_MODE" = X32; then
+      sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
+    else
+      sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
+    fi
+    sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+    ;;
+  hppa*64*)
+    shrext_cmds='.sl'
+    hardcode_into_libs=yes
+    dynamic_linker="$host_os dld.sl"
+    shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
+    shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    soname_spec='${libname}${release}${shared_ext}$major'
+    sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
+    sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+    ;;
+  *)
+    shrext_cmds='.sl'
+    dynamic_linker="$host_os dld.sl"
+    shlibpath_var=SHLIB_PATH
+    shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    soname_spec='${libname}${release}${shared_ext}$major'
+    ;;
+  esac
+  # HP-UX runs *really* slowly unless shared libraries are mode 555.
+  postinstall_cmds='chmod 555 $lib'
+  ;;
 
-# Used on cygwin: assembler.
-AS="$AS"
+interix[3-9]*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  ;;
 
-# The name of the directory that contains temporary libtool files.
-objdir=$objdir
+irix5* | irix6* | nonstopux*)
+  case $host_os in
+    nonstopux*) version_type=nonstopux ;;
+    *)
+	if test "$lt_cv_prog_gnu_ld" = yes; then
+		version_type=linux
+	else
+		version_type=irix
+	fi ;;
+  esac
+  need_lib_prefix=no
+  need_version=no
+  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
+  case $host_os in
+  irix5* | nonstopux*)
+    libsuff= shlibsuff=
+    ;;
+  *)
+    case $LD in # libtool.m4 will add one of these switches to LD
+    *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
+      libsuff= shlibsuff= libmagic=32-bit;;
+    *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
+      libsuff=32 shlibsuff=N32 libmagic=N32;;
+    *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
+      libsuff=64 shlibsuff=64 libmagic=64-bit;;
+    *) libsuff= shlibsuff= libmagic=never-match;;
+    esac
+    ;;
+  esac
+  shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
+  shlibpath_overrides_runpath=no
+  sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
+  sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
+  hardcode_into_libs=yes
+  ;;
 
-# How to create reloadable object files.
-reload_flag=$lt_reload_flag
-reload_cmds=$lt_reload_cmds
+# No shared lib support for Linux oldld, aout, or coff.
+linux*oldld* | linux*aout* | linux*coff*)
+  dynamic_linker=no
+  ;;
 
-# How to pass a linker flag through the compiler.
-wl=$lt_lt_prog_compiler_wl_RC
+# This must be Linux ELF.
+linux* | k*bsd*-gnu)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  # Some binutils ld are patched to set DT_RUNPATH
+  save_LDFLAGS=$LDFLAGS
+  save_libdir=$libdir
+  eval "libdir=/foo; wl=\"$lt_prog_compiler_wl_CXX\"; \
+       LDFLAGS=\"\$LDFLAGS $hardcode_libdir_flag_spec_CXX\""
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h.  */
 
-# Object file suffix (normally "o").
-objext="$ac_objext"
+int
+main ()
+{
 
-# Old archive suffix (normally "a").
-libext="$libext"
+  ;
+  return 0;
+}
+_ACEOF
+if ac_fn_cxx_try_link "$LINENO"; then :
+  if  ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null; then :
+  shlibpath_overrides_runpath=yes
+fi
+fi
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
+  LDFLAGS=$save_LDFLAGS
+  libdir=$save_libdir
 
-# Shared library suffix (normally ".so").
-shrext_cmds='$shrext_cmds'
+  # This implies no fast_install, which is unacceptable.
+  # Some rework will be needed to allow for fast_install
+  # before this can be enabled.
+  hardcode_into_libs=yes
 
-# Executable file suffix (normally "").
-exeext="$exeext"
+  # Append ld.so.conf contents to the search path
+  if test -f /etc/ld.so.conf; then
+    lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[	 ]*hwcap[	 ]/d;s/[:,	]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
+    sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
+  fi
 
-# Additional compiler flags for building library objects.
-pic_flag=$lt_lt_prog_compiler_pic_RC
-pic_mode=$pic_mode
+  # We used to test for /lib/ld.so.1 and disable shared libraries on
+  # powerpc, because MkLinux only supported shared libraries with the
+  # GNU dynamic linker.  Since this was broken with cross compilers,
+  # most powerpc-linux boxes support dynamic linking these days and
+  # people can always --disable-shared, the test was removed, and we
+  # assume the GNU/Linux dynamic linker is in use.
+  dynamic_linker='GNU/Linux ld.so'
+  ;;
 
-# What is the maximum length of a command?
-max_cmd_len=$lt_cv_sys_max_cmd_len
+netbsdelf*-gnu)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  dynamic_linker='NetBSD ld.elf_so'
+  ;;
 
-# Does compiler simultaneously support -c and -o options?
-compiler_c_o=$lt_lt_cv_prog_compiler_c_o_RC
+netbsd*)
+  version_type=sunos
+  need_lib_prefix=no
+  need_version=no
+  if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+    finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+    dynamic_linker='NetBSD (a.out) ld.so'
+  else
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+    soname_spec='${libname}${release}${shared_ext}$major'
+    dynamic_linker='NetBSD ld.elf_so'
+  fi
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  hardcode_into_libs=yes
+  ;;
 
-# Must we lock files when doing compilation?
-need_locks=$lt_need_locks
+newsos6)
+  version_type=linux
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  ;;
 
-# Do we need the lib prefix for modules?
-need_lib_prefix=$need_lib_prefix
+*nto* | *qnx*)
+  version_type=qnx
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  dynamic_linker='ldqnx.so'
+  ;;
 
-# Do we need a version for libraries?
-need_version=$need_version
+openbsd*)
+  version_type=sunos
+  sys_lib_dlsearch_path_spec="/usr/lib"
+  need_lib_prefix=no
+  # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
+  case $host_os in
+    openbsd3.3 | openbsd3.3.*)	need_version=yes ;;
+    *)				need_version=no  ;;
+  esac
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+  finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+    case $host_os in
+      openbsd2.[89] | openbsd2.[89].*)
+	shlibpath_overrides_runpath=no
+	;;
+      *)
+	shlibpath_overrides_runpath=yes
+	;;
+      esac
+  else
+    shlibpath_overrides_runpath=yes
+  fi
+  ;;
 
-# Whether dlopen is supported.
-dlopen_support=$enable_dlopen
+os2*)
+  libname_spec='$name'
+  shrext_cmds=".dll"
+  need_lib_prefix=no
+  library_names_spec='$libname${shared_ext} $libname.a'
+  dynamic_linker='OS/2 ld.exe'
+  shlibpath_var=LIBPATH
+  ;;
 
-# Whether dlopen of programs is supported.
-dlopen_self=$enable_dlopen_self
+osf3* | osf4* | osf5*)
+  version_type=osf
+  need_lib_prefix=no
+  need_version=no
+  soname_spec='${libname}${release}${shared_ext}$major'
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  shlibpath_var=LD_LIBRARY_PATH
+  sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
+  sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
+  ;;
 
-# Whether dlopen of statically linked programs is supported.
-dlopen_self_static=$enable_dlopen_self_static
+rdos*)
+  dynamic_linker=no
+  ;;
 
-# Compiler flag to prevent dynamic linking.
-link_static_flag=$lt_lt_prog_compiler_static_RC
+solaris*)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  hardcode_into_libs=yes
+  # ldd complains unless libraries are executable
+  postinstall_cmds='chmod +x $lib'
+  ;;
 
-# Compiler flag to turn off builtin functions.
-no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_RC
+sunos4*)
+  version_type=sunos
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+  finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  if test "$with_gnu_ld" = yes; then
+    need_lib_prefix=no
+  fi
+  need_version=yes
+  ;;
 
-# Compiler flag to allow reflexive dlopens.
-export_dynamic_flag_spec=$lt_export_dynamic_flag_spec_RC
+sysv4 | sysv4.3*)
+  version_type=linux
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  case $host_vendor in
+    sni)
+      shlibpath_overrides_runpath=no
+      need_lib_prefix=no
+      runpath_var=LD_RUN_PATH
+      ;;
+    siemens)
+      need_lib_prefix=no
+      ;;
+    motorola)
+      need_lib_prefix=no
+      need_version=no
+      shlibpath_overrides_runpath=no
+      sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
+      ;;
+  esac
+  ;;
 
-# Compiler flag to generate shared objects directly from archives.
-whole_archive_flag_spec=$lt_whole_archive_flag_spec_RC
+sysv4*MP*)
+  if test -d /usr/nec ;then
+    version_type=linux
+    library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
+    soname_spec='$libname${shared_ext}.$major'
+    shlibpath_var=LD_LIBRARY_PATH
+  fi
+  ;;
 
-# Compiler flag to generate thread-safe objects.
-thread_safe_flag_spec=$lt_thread_safe_flag_spec_RC
+sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
+  version_type=freebsd-elf
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
+  hardcode_into_libs=yes
+  if test "$with_gnu_ld" = yes; then
+    sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
+  else
+    sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
+    case $host_os in
+      sco3.2v5*)
+        sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
+	;;
+    esac
+  fi
+  sys_lib_dlsearch_path_spec='/usr/lib'
+  ;;
 
-# Library versioning type.
-version_type=$version_type
+tpf*)
+  # TPF is a cross-target only.  Preferred cross-host = GNU/Linux.
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  ;;
 
-# Format of library name prefix.
-libname_spec=$lt_libname_spec
+uts4*)
+  version_type=linux
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  ;;
 
-# List of archive names.  First name is the real one, the rest are links.
-# The last name is the one that the linker finds with -lNAME.
-library_names_spec=$lt_library_names_spec
+*)
+  dynamic_linker=no
+  ;;
+esac
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $dynamic_linker" >&5
+$as_echo "$dynamic_linker" >&6; }
+test "$dynamic_linker" = no && can_build_shared=no
 
-# The coded name of the library, if different from the real name.
-soname_spec=$lt_soname_spec
+variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
+if test "$GCC" = yes; then
+  variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
+fi
 
-# Commands used to build and install an old-style archive.
-RANLIB=$lt_RANLIB
-old_archive_cmds=$lt_old_archive_cmds_RC
-old_postinstall_cmds=$lt_old_postinstall_cmds
-old_postuninstall_cmds=$lt_old_postuninstall_cmds
+if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then
+  sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec"
+fi
+if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then
+  sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec"
+fi
 
-# Create an old-style archive from a shared archive.
-old_archive_from_new_cmds=$lt_old_archive_from_new_cmds_RC
 
-# Create a temporary old-style archive to link instead of a shared archive.
-old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds_RC
 
-# Commands used to build and install a shared archive.
-archive_cmds=$lt_archive_cmds_RC
-archive_expsym_cmds=$lt_archive_expsym_cmds_RC
-postinstall_cmds=$lt_postinstall_cmds
-postuninstall_cmds=$lt_postuninstall_cmds
 
-# Commands used to build a loadable module (assumed same as above if empty)
-module_cmds=$lt_module_cmds_RC
-module_expsym_cmds=$lt_module_expsym_cmds_RC
 
-# Commands to strip libraries.
-old_striplib=$lt_old_striplib
-striplib=$lt_striplib
 
-# Dependencies to place before the objects being linked to create a
-# shared library.
-predep_objects=$lt_predep_objects_RC
-
-# Dependencies to place after the objects being linked to create a
-# shared library.
-postdep_objects=$lt_postdep_objects_RC
-
-# Dependencies to place before the objects being linked to create a
-# shared library.
-predeps=$lt_predeps_RC
-
-# Dependencies to place after the objects being linked to create a
-# shared library.
-postdeps=$lt_postdeps_RC
-
-# The directories searched by this compiler when creating a shared
-# library
-compiler_lib_search_dirs=$lt_compiler_lib_search_dirs_RC
 
-# The library search path used internally by the compiler when linking
-# a shared library.
-compiler_lib_search_path=$lt_compiler_lib_search_path_RC
 
-# Method to check whether dependent libraries are shared objects.
-deplibs_check_method=$lt_deplibs_check_method
 
-# Command to use when deplibs_check_method == file_magic.
-file_magic_cmd=$lt_file_magic_cmd
 
-# Flag that allows shared libraries with undefined symbols to be built.
-allow_undefined_flag=$lt_allow_undefined_flag_RC
 
-# Flag that forces no undefined symbols.
-no_undefined_flag=$lt_no_undefined_flag_RC
 
-# Commands used to finish a libtool library installation in a directory.
-finish_cmds=$lt_finish_cmds
 
-# Same as above, but a single script fragment to be evaled but not shown.
-finish_eval=$lt_finish_eval
 
-# Take the output of nm and produce a listing of raw symbols and C names.
-global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe
 
-# Transform the output of nm in a proper C declaration
-global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl
 
-# Transform the output of nm in a C name address pair
-global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
 
-# This is the shared library runtime path variable.
-runpath_var=$runpath_var
 
-# This is the shared library path variable.
-shlibpath_var=$shlibpath_var
 
-# Is shlibpath searched before the hard-coded library search path?
-shlibpath_overrides_runpath=$shlibpath_overrides_runpath
 
-# How to hardcode a shared library path into an executable.
-hardcode_action=$hardcode_action_RC
 
-# Whether we should hardcode library paths into libraries.
-hardcode_into_libs=$hardcode_into_libs
 
-# Flag to hardcode \$libdir into a binary during linking.
-# This must work even if \$libdir does not exist.
-hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_RC
 
-# If ld is used when linking, flag to hardcode \$libdir into
-# a binary during linking. This must work even if \$libdir does
-# not exist.
-hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_RC
-
-# Whether we need a single -rpath flag with a separated argument.
-hardcode_libdir_separator=$lt_hardcode_libdir_separator_RC
-
-# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the
-# resulting binary.
-hardcode_direct=$hardcode_direct_RC
-
-# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
-# resulting binary.
-hardcode_minus_L=$hardcode_minus_L_RC
-
-# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into
-# the resulting binary.
-hardcode_shlibpath_var=$hardcode_shlibpath_var_RC
-
-# Set to yes if building a shared library automatically hardcodes DIR into the library
-# and all subsequent libraries and executables linked against it.
-hardcode_automatic=$hardcode_automatic_RC
 
-# Variables whose values should be saved in libtool wrapper scripts and
-# restored at relink time.
-variables_saved_for_relink="$variables_saved_for_relink"
 
-# Whether libtool must link a program against all its dependency libraries.
-link_all_deplibs=$link_all_deplibs_RC
 
-# Compile-time system search path for libraries
-sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
 
-# Run-time system search path for libraries
-sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
 
-# Fix the shell variable \$srcfile for the compiler.
-fix_srcfile_path=$lt_fix_srcfile_path
 
-# Set to yes if exported symbols are required.
-always_export_symbols=$always_export_symbols_RC
 
-# The commands to list exported symbols.
-export_symbols_cmds=$lt_export_symbols_cmds_RC
 
-# The commands to extract the exported symbol list from a shared archive.
-extract_expsyms_cmds=$lt_extract_expsyms_cmds
 
-# Symbols that should not be listed in the preloaded symbols.
-exclude_expsyms=$lt_exclude_expsyms_RC
 
-# Symbols that must always be exported.
-include_expsyms=$lt_include_expsyms_RC
 
-# ### END LIBTOOL TAG CONFIG: $tagname
 
-__EOF__
 
+    { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to hardcode library paths into programs" >&5
+$as_echo_n "checking how to hardcode library paths into programs... " >&6; }
+hardcode_action_CXX=
+if test -n "$hardcode_libdir_flag_spec_CXX" ||
+   test -n "$runpath_var_CXX" ||
+   test "X$hardcode_automatic_CXX" = "Xyes" ; then
 
-else
-  # If there is no Makefile yet, we rely on a make rule to execute
-  # `config.status --recheck' to rerun these tests and create the
-  # libtool script then.
-  ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'`
-  if test -f "$ltmain_in"; then
-    test -f Makefile && make "$ltmain"
+  # We can hardcode non-existent directories.
+  if test "$hardcode_direct_CXX" != no &&
+     # If the only mechanism to avoid hardcoding is shlibpath_var, we
+     # have to relink, otherwise we might link with an installed library
+     # when we should be linking with a yet-to-be-installed one
+     ## test "$_LT_TAGVAR(hardcode_shlibpath_var, CXX)" != no &&
+     test "$hardcode_minus_L_CXX" != no; then
+    # Linking always hardcodes the temporary library directory.
+    hardcode_action_CXX=relink
+  else
+    # We can link without hardcoding, and we can hardcode nonexisting dirs.
+    hardcode_action_CXX=immediate
   fi
+else
+  # We cannot hardcode anything, or else we can only hardcode existing
+  # directories.
+  hardcode_action_CXX=unsupported
 fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $hardcode_action_CXX" >&5
+$as_echo "$hardcode_action_CXX" >&6; }
 
+if test "$hardcode_action_CXX" = relink ||
+   test "$inherit_rpath_CXX" = yes; then
+  # Fast installation is not supported
+  enable_fast_install=no
+elif test "$shlibpath_overrides_runpath" = yes ||
+     test "$enable_shared" = no; then
+  # Fast installation is not necessary
+  enable_fast_install=needless
+fi
 
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-CC="$lt_save_CC"
-
-	;;
-
-      *)
-	{ { $as_echo "$as_me:$LINENO: error: Unsupported tag name: $tagname" >&5
-$as_echo "$as_me: error: Unsupported tag name: $tagname" >&2;}
-   { (exit 1); exit 1; }; }
-	;;
-      esac
 
-      # Append the new tag name to the list of available tags.
-      if test -n "$tagname" ; then
-      available_tags="$available_tags $tagname"
-    fi
-    fi
-  done
-  IFS="$lt_save_ifs"
 
-  # Now substitute the updated list of available tags.
-  if eval "sed -e 's/^available_tags=.*\$/available_tags=\"$available_tags\"/' \"$ofile\" > \"${ofile}T\""; then
-    mv "${ofile}T" "$ofile"
-    chmod +x "$ofile"
-  else
-    rm -f "${ofile}T"
-    { { $as_echo "$as_me:$LINENO: error: unable to update list of available tagged configurations." >&5
-$as_echo "$as_me: error: unable to update list of available tagged configurations." >&2;}
-   { (exit 1); exit 1; }; }
-  fi
-fi
 
 
 
-# This can be used to rebuild libtool when needed
-LIBTOOL_DEPS="$ac_aux_dir/ltmain.sh"
 
-# Always use our own libtool.
-LIBTOOL='$(SHELL) $(top_builddir)/libtool'
+  fi # test -n "$compiler"
 
-# Prevent multiple expansion
+  CC=$lt_save_CC
+  LDCXX=$LD
+  LD=$lt_save_LD
+  GCC=$lt_save_GCC
+  with_gnu_ld=$lt_save_with_gnu_ld
+  lt_cv_path_LDCXX=$lt_cv_path_LD
+  lt_cv_path_LD=$lt_save_path_LD
+  lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld
+  lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld
+fi # test "$_lt_caught_CXX_error" != yes
 
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
 
 
 
@@ -21728,28 +15667,25 @@
 
 
 
+        ac_config_commands="$ac_config_commands libtool"
 
 
 
 
+# Only expand once:
 
 
 
 
 # Checks for libraries.
-
-{ $as_echo "$as_me:$LINENO: checking for main in -lc" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for main in -lc" >&5
 $as_echo_n "checking for main in -lc... " >&6; }
-if test "${ac_cv_lib_c_main+set}" = set; then
+if test "${ac_cv_lib_c_main+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
   ac_check_lib_save_LIBS=$LIBS
 LIBS="-lc  $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 
 
@@ -21761,43 +15697,18 @@
   return 0;
 }
 _ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_link") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest$ac_exeext && {
-	 test "$cross_compiling" = yes ||
-	 $as_test_x conftest$ac_exeext
-       }; then
+if ac_fn_c_try_link "$LINENO"; then :
   ac_cv_lib_c_main=yes
 else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-	ac_cv_lib_c_main=no
+  ac_cv_lib_c_main=no
 fi
-
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-      conftest$ac_exeext conftest.$ac_ext
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
 LIBS=$ac_check_lib_save_LIBS
 fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_c_main" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_c_main" >&5
 $as_echo "$ac_cv_lib_c_main" >&6; }
-if test "x$ac_cv_lib_c_main" = x""yes; then
+if test "x$ac_cv_lib_c_main" = x""yes; then :
   cat >>confdefs.h <<_ACEOF
 #define HAVE_LIBC 1
 _ACEOF
@@ -21806,19 +15717,14 @@
 
 fi
  # needed for sunos?
-
-{ $as_echo "$as_me:$LINENO: checking for main in -lpthread" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for main in -lpthread" >&5
 $as_echo_n "checking for main in -lpthread... " >&6; }
-if test "${ac_cv_lib_pthread_main+set}" = set; then
+if test "${ac_cv_lib_pthread_main+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
   ac_check_lib_save_LIBS=$LIBS
 LIBS="-lpthread  $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 
 
@@ -21830,43 +15736,18 @@
   return 0;
 }
 _ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_link") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest$ac_exeext && {
-	 test "$cross_compiling" = yes ||
-	 $as_test_x conftest$ac_exeext
-       }; then
+if ac_fn_c_try_link "$LINENO"; then :
   ac_cv_lib_pthread_main=yes
 else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-	ac_cv_lib_pthread_main=no
+  ac_cv_lib_pthread_main=no
 fi
-
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-      conftest$ac_exeext conftest.$ac_ext
+rm -f core conftest.err conftest.$ac_objext \
+    conftest$ac_exeext conftest.$ac_ext
 LIBS=$ac_check_lib_save_LIBS
 fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_pthread_main" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_pthread_main" >&5
 $as_echo "$ac_cv_lib_pthread_main" >&6; }
-if test "x$ac_cv_lib_pthread_main" = x""yes; then
+if test "x$ac_cv_lib_pthread_main" = x""yes; then :
   cat >>confdefs.h <<_ACEOF
 #define HAVE_LIBPTHREAD 1
 _ACEOF
@@ -21876,24 +15757,18 @@
 fi
 
 
-cat >>confdefs.h <<\_ACEOF
-#define _REENTRANT 1
-_ACEOF
+$as_echo "#define _REENTRANT 1" >>confdefs.h
 
 
 
 
 # Checks for header files.
-{ $as_echo "$as_me:$LINENO: checking for ANSI C header files" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ANSI C header files" >&5
 $as_echo_n "checking for ANSI C header files... " >&6; }
-if test "${ac_cv_header_stdc+set}" = set; then
+if test "${ac_cv_header_stdc+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 #include <stdlib.h>
 #include <stdarg.h>
@@ -21908,48 +15783,23 @@
   return 0;
 }
 _ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_compile") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest.$ac_objext; then
+if ac_fn_c_try_compile "$LINENO"; then :
   ac_cv_header_stdc=yes
 else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-	ac_cv_header_stdc=no
+  ac_cv_header_stdc=no
 fi
-
 rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
 
 if test $ac_cv_header_stdc = yes; then
   # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 #include <string.h>
 
 _ACEOF
 if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
-  $EGREP "memchr" >/dev/null 2>&1; then
-  :
+  $EGREP "memchr" >/dev/null 2>&1; then :
+
 else
   ac_cv_header_stdc=no
 fi
@@ -21959,18 +15809,14 @@
 
 if test $ac_cv_header_stdc = yes; then
   # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 #include <stdlib.h>
 
 _ACEOF
 if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
-  $EGREP "free" >/dev/null 2>&1; then
-  :
+  $EGREP "free" >/dev/null 2>&1; then :
+
 else
   ac_cv_header_stdc=no
 fi
@@ -21980,14 +15826,10 @@
 
 if test $ac_cv_header_stdc = yes; then
   # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi.
-  if test "$cross_compiling" = yes; then
+  if test "$cross_compiling" = yes; then :
   :
 else
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 #include <ctype.h>
 #include <stdlib.h>
@@ -22014,201 +15856,31 @@
   return 0;
 }
 _ACEOF
-rm -f conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_link") 2>&5
-  ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
-  { (case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_try") 2>&5
-  ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  :
-else
-  $as_echo "$as_me: program exited with status $ac_status" >&5
-$as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
+if ac_fn_c_try_run "$LINENO"; then :
 
-( exit $ac_status )
-ac_cv_header_stdc=no
+else
+  ac_cv_header_stdc=no
 fi
-rm -rf conftest.dSYM
-rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
+  conftest.$ac_objext conftest.beam conftest.$ac_ext
 fi
 
-
 fi
 fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_stdc" >&5
 $as_echo "$ac_cv_header_stdc" >&6; }
 if test $ac_cv_header_stdc = yes; then
 
-cat >>confdefs.h <<\_ACEOF
-#define STDC_HEADERS 1
-_ACEOF
+$as_echo "#define STDC_HEADERS 1" >>confdefs.h
 
 fi
 
-
-
-
-
-
 for ac_header in inttypes.h malloc.h stddef.h stdlib.h string.h
-do
-as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
-  { $as_echo "$as_me:$LINENO: checking for $ac_header" >&5
-$as_echo_n "checking for $ac_header... " >&6; }
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
-  $as_echo_n "(cached) " >&6
-fi
-ac_res=`eval 'as_val=${'$as_ac_Header'}
-		 $as_echo "$as_val"'`
-	       { $as_echo "$as_me:$LINENO: result: $ac_res" >&5
-$as_echo "$ac_res" >&6; }
-else
-  # Is the header compilable?
-{ $as_echo "$as_me:$LINENO: checking $ac_header usability" >&5
-$as_echo_n "checking $ac_header usability... " >&6; }
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-$ac_includes_default
-#include <$ac_header>
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_compile") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest.$ac_objext; then
-  ac_header_compiler=yes
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-	ac_header_compiler=no
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-{ $as_echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
-$as_echo "$ac_header_compiler" >&6; }
-
-# Is the header present?
-{ $as_echo "$as_me:$LINENO: checking $ac_header presence" >&5
-$as_echo_n "checking $ac_header presence... " >&6; }
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-#include <$ac_header>
-_ACEOF
-if { (ac_try="$ac_cpp conftest.$ac_ext"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } >/dev/null && {
-	 test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       }; then
-  ac_header_preproc=yes
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-  ac_header_preproc=no
-fi
-
-rm -f conftest.err conftest.$ac_ext
-{ $as_echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
-$as_echo "$ac_header_preproc" >&6; }
-
-# So?  What about this header?
-case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in
-  yes:no: )
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
-$as_echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5
-$as_echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;}
-    ac_header_preproc=yes
-    ;;
-  no:yes:* )
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5
-$as_echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header:     check for missing prerequisite headers?" >&5
-$as_echo "$as_me: WARNING: $ac_header:     check for missing prerequisite headers?" >&2;}
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5
-$as_echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;}
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header:     section \"Present But Cannot Be Compiled\"" >&5
-$as_echo "$as_me: WARNING: $ac_header:     section \"Present But Cannot Be Compiled\"" >&2;}
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
-$as_echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5
-$as_echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;}
-    ( cat <<\_ASBOX
-## --------------------------------------------------- ##
-## Report this to oleh_derevenko@users.sourceforge.net ##
-## --------------------------------------------------- ##
-_ASBOX
-     ) | sed "s/^/$as_me: WARNING:     /" >&2
-    ;;
-esac
-{ $as_echo "$as_me:$LINENO: checking for $ac_header" >&5
-$as_echo_n "checking for $ac_header... " >&6; }
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
-  $as_echo_n "(cached) " >&6
-else
-  eval "$as_ac_Header=\$ac_header_preproc"
-fi
-ac_res=`eval 'as_val=${'$as_ac_Header'}
-		 $as_echo "$as_val"'`
-	       { $as_echo "$as_me:$LINENO: result: $ac_res" >&5
-$as_echo "$ac_res" >&6; }
-
-fi
-as_val=`eval 'as_val=${'$as_ac_Header'}
-		 $as_echo "$as_val"'`
-   if test "x$as_val" = x""yes; then
+do :
+  as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
+ac_fn_c_check_header_mongrel "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default"
+eval as_val=\$$as_ac_Header
+   if test "x$as_val" = x""yes; then :
   cat >>confdefs.h <<_ACEOF
 #define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
 _ACEOF
@@ -22219,16 +15891,12 @@
 
 
 # Checks for typedefs, structures, and compiler characteristics.
-{ $as_echo "$as_me:$LINENO: checking for stdbool.h that conforms to C99" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for stdbool.h that conforms to C99" >&5
 $as_echo_n "checking for stdbool.h that conforms to C99... " >&6; }
-if test "${ac_cv_header_stdbool_h+set}" = set; then
+if test "${ac_cv_header_stdbool_h+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 
 #include <stdbool.h>
@@ -22308,131 +15976,17 @@
   return 0;
 }
 _ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_compile") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest.$ac_objext; then
+if ac_fn_c_try_compile "$LINENO"; then :
   ac_cv_header_stdbool_h=yes
 else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-	ac_cv_header_stdbool_h=no
+  ac_cv_header_stdbool_h=no
 fi
-
 rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
 fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_header_stdbool_h" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_stdbool_h" >&5
 $as_echo "$ac_cv_header_stdbool_h" >&6; }
-{ $as_echo "$as_me:$LINENO: checking for _Bool" >&5
-$as_echo_n "checking for _Bool... " >&6; }
-if test "${ac_cv_type__Bool+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
-  ac_cv_type__Bool=no
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-$ac_includes_default
-int
-main ()
-{
-if (sizeof (_Bool))
-       return 0;
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_compile") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest.$ac_objext; then
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-$ac_includes_default
-int
-main ()
-{
-if (sizeof ((_Bool)))
-	  return 0;
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_compile") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest.$ac_objext; then
-  :
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-	ac_cv_type__Bool=yes
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-
-fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_type__Bool" >&5
-$as_echo "$ac_cv_type__Bool" >&6; }
-if test "x$ac_cv_type__Bool" = x""yes; then
+ac_fn_c_check_type "$LINENO" "_Bool" "ac_cv_type__Bool" "$ac_includes_default"
+if test "x$ac_cv_type__Bool" = x""yes; then :
 
 cat >>confdefs.h <<_ACEOF
 #define HAVE__BOOL 1
@@ -22443,22 +15997,16 @@
 
 if test $ac_cv_header_stdbool_h = yes; then
 
-cat >>confdefs.h <<\_ACEOF
-#define HAVE_STDBOOL_H 1
-_ACEOF
+$as_echo "#define HAVE_STDBOOL_H 1" >>confdefs.h
 
 fi
 
-{ $as_echo "$as_me:$LINENO: checking for an ANSI C-conforming const" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for an ANSI C-conforming const" >&5
 $as_echo_n "checking for an ANSI C-conforming const... " >&6; }
-if test "${ac_cv_c_const+set}" = set; then
+if test "${ac_cv_c_const+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 
 int
@@ -22518,99 +16066,48 @@
   return 0;
 }
 _ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_compile") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest.$ac_objext; then
+if ac_fn_c_try_compile "$LINENO"; then :
   ac_cv_c_const=yes
 else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-	ac_cv_c_const=no
+  ac_cv_c_const=no
 fi
-
 rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
 fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_c_const" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_const" >&5
 $as_echo "$ac_cv_c_const" >&6; }
 if test $ac_cv_c_const = no; then
 
-cat >>confdefs.h <<\_ACEOF
-#define const /**/
-_ACEOF
+$as_echo "#define const /**/" >>confdefs.h
 
 fi
 
-{ $as_echo "$as_me:$LINENO: checking for inline" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for inline" >&5
 $as_echo_n "checking for inline... " >&6; }
-if test "${ac_cv_c_inline+set}" = set; then
+if test "${ac_cv_c_inline+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
   ac_cv_c_inline=no
 for ac_kw in inline __inline__ __inline; do
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
 #ifndef __cplusplus
 typedef int foo_t;
 static $ac_kw foo_t static_foo () {return 0; }
-$ac_kw foo_t foo () {return 0; }
-#endif
-
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_compile") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest.$ac_objext; then
-  ac_cv_c_inline=$ac_kw
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
+$ac_kw foo_t foo () {return 0; }
+#endif
 
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_cv_c_inline=$ac_kw
 fi
-
 rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
   test "$ac_cv_c_inline" != no && break
 done
 
 fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_c_inline" >&5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_inline" >&5
 $as_echo "$ac_cv_c_inline" >&6; }
 
-
 case $ac_cv_c_inline in
   inline | yes) ;;
   *)
@@ -22626,3212 +16123,2791 @@
     ;;
 esac
 
+ac_fn_c_find_intX_t "$LINENO" "16" "ac_cv_c_int16_t"
+case $ac_cv_c_int16_t in #(
+  no|yes) ;; #(
+  *)
 
-  { $as_echo "$as_me:$LINENO: checking for int16_t" >&5
-$as_echo_n "checking for int16_t... " >&6; }
-if test "${ac_cv_c_int16_t+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
-  ac_cv_c_int16_t=no
-     for ac_type in 'int16_t' 'int' 'long int' \
-	 'long long int' 'short int' 'signed char'; do
-       cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
+cat >>confdefs.h <<_ACEOF
+#define int16_t $ac_cv_c_int16_t
 _ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-$ac_includes_default
-int
-main ()
-{
-static int test_array [1 - 2 * !(0 < ($ac_type) (((($ac_type) 1 << (16 - 2)) - 1) * 2 + 1))];
-test_array [0] = 0
+;;
+esac
 
-  ;
-  return 0;
-}
+ac_fn_c_find_intX_t "$LINENO" "32" "ac_cv_c_int32_t"
+case $ac_cv_c_int32_t in #(
+  no|yes) ;; #(
+  *)
+
+cat >>confdefs.h <<_ACEOF
+#define int32_t $ac_cv_c_int32_t
 _ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
+;;
 esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_compile") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest.$ac_objext; then
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-$ac_includes_default
-int
-main ()
-{
-static int test_array [1 - 2 * !(($ac_type) (((($ac_type) 1 << (16 - 2)) - 1) * 2 + 1)
-		 < ($ac_type) (((($ac_type) 1 << (16 - 2)) - 1) * 2 + 2))];
-test_array [0] = 0
 
-  ;
-  return 0;
-}
+ac_fn_c_find_intX_t "$LINENO" "64" "ac_cv_c_int64_t"
+case $ac_cv_c_int64_t in #(
+  no|yes) ;; #(
+  *)
+
+cat >>confdefs.h <<_ACEOF
+#define int64_t $ac_cv_c_int64_t
 _ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
+;;
 esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_compile") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest.$ac_objext; then
-  :
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
 
-	case $ac_type in
-  int16_t) ac_cv_c_int16_t=yes ;;
-  *) ac_cv_c_int16_t=$ac_type ;;
+ac_fn_c_find_intX_t "$LINENO" "8" "ac_cv_c_int8_t"
+case $ac_cv_c_int8_t in #(
+  no|yes) ;; #(
+  *)
+
+cat >>confdefs.h <<_ACEOF
+#define int8_t $ac_cv_c_int8_t
+_ACEOF
+;;
 esac
 
-fi
+ac_fn_c_check_type "$LINENO" "size_t" "ac_cv_type_size_t" "$ac_includes_default"
+if test "x$ac_cv_type_size_t" = x""yes; then :
 
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
 else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
 
+cat >>confdefs.h <<_ACEOF
+#define size_t unsigned int
+_ACEOF
 
 fi
 
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-       test "$ac_cv_c_int16_t" != no && break
-     done
-fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_c_int16_t" >&5
-$as_echo "$ac_cv_c_int16_t" >&6; }
-  case $ac_cv_c_int16_t in #(
+ac_fn_c_find_uintX_t "$LINENO" "16" "ac_cv_c_uint16_t"
+case $ac_cv_c_uint16_t in #(
   no|yes) ;; #(
   *)
 
+
 cat >>confdefs.h <<_ACEOF
-#define int16_t $ac_cv_c_int16_t
+#define uint16_t $ac_cv_c_uint16_t
+_ACEOF
+;;
+  esac
+
+ac_fn_c_find_uintX_t "$LINENO" "32" "ac_cv_c_uint32_t"
+case $ac_cv_c_uint32_t in #(
+  no|yes) ;; #(
+  *)
+
+$as_echo "#define _UINT32_T 1" >>confdefs.h
+
+
+cat >>confdefs.h <<_ACEOF
+#define uint32_t $ac_cv_c_uint32_t
+_ACEOF
+;;
+  esac
+
+ac_fn_c_find_uintX_t "$LINENO" "64" "ac_cv_c_uint64_t"
+case $ac_cv_c_uint64_t in #(
+  no|yes) ;; #(
+  *)
+
+$as_echo "#define _UINT64_T 1" >>confdefs.h
+
+
+cat >>confdefs.h <<_ACEOF
+#define uint64_t $ac_cv_c_uint64_t
 _ACEOF
 ;;
   esac
 
+ac_fn_c_find_uintX_t "$LINENO" "8" "ac_cv_c_uint8_t"
+case $ac_cv_c_uint8_t in #(
+  no|yes) ;; #(
+  *)
+
+$as_echo "#define _UINT8_T 1" >>confdefs.h
+
+
+cat >>confdefs.h <<_ACEOF
+#define uint8_t $ac_cv_c_uint8_t
+_ACEOF
+;;
+  esac
 
-  { $as_echo "$as_me:$LINENO: checking for int32_t" >&5
-$as_echo_n "checking for int32_t... " >&6; }
-if test "${ac_cv_c_int32_t+set}" = set; then
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for working volatile" >&5
+$as_echo_n "checking for working volatile... " >&6; }
+if test "${ac_cv_c_volatile+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
-  ac_cv_c_int32_t=no
-     for ac_type in 'int32_t' 'int' 'long int' \
-	 'long long int' 'short int' 'signed char'; do
-       cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
-$ac_includes_default
+
 int
 main ()
 {
-static int test_array [1 - 2 * !(0 < ($ac_type) (((($ac_type) 1 << (32 - 2)) - 1) * 2 + 1))];
-test_array [0] = 0
 
+volatile int x;
+int * volatile y = (int *) 0;
+return !x && !y;
   ;
   return 0;
 }
 _ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_compile") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest.$ac_objext; then
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
+if ac_fn_c_try_compile "$LINENO"; then :
+  ac_cv_c_volatile=yes
+else
+  ac_cv_c_volatile=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_volatile" >&5
+$as_echo "$ac_cv_c_volatile" >&6; }
+if test $ac_cv_c_volatile = no; then
+
+$as_echo "#define volatile /**/" >>confdefs.h
+
+fi
+
+ac_fn_c_check_type "$LINENO" "ptrdiff_t" "ac_cv_type_ptrdiff_t" "$ac_includes_default"
+if test "x$ac_cv_type_ptrdiff_t" = x""yes; then :
+
+cat >>confdefs.h <<_ACEOF
+#define HAVE_PTRDIFF_T 1
+_ACEOF
+
+
+fi
+
+
+# Checks for library functions.
+for ac_header in stdlib.h
+do :
+  ac_fn_c_check_header_mongrel "$LINENO" "stdlib.h" "ac_cv_header_stdlib_h" "$ac_includes_default"
+if test "x$ac_cv_header_stdlib_h" = x""yes; then :
+  cat >>confdefs.h <<_ACEOF
+#define HAVE_STDLIB_H 1
 _ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+
+fi
+
+done
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU libc compatible malloc" >&5
+$as_echo_n "checking for GNU libc compatible malloc... " >&6; }
+if test "${ac_cv_func_malloc_0_nonnull+set}" = set; then :
+  $as_echo_n "(cached) " >&6
+else
+  if test "$cross_compiling" = yes; then :
+  ac_cv_func_malloc_0_nonnull=no
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
-$ac_includes_default
+#if defined STDC_HEADERS || defined HAVE_STDLIB_H
+# include <stdlib.h>
+#else
+char *malloc ();
+#endif
+
 int
 main ()
 {
-static int test_array [1 - 2 * !(($ac_type) (((($ac_type) 1 << (32 - 2)) - 1) * 2 + 1)
-		 < ($ac_type) (((($ac_type) 1 << (32 - 2)) - 1) * 2 + 2))];
-test_array [0] = 0
-
+return ! malloc (0);
   ;
   return 0;
 }
 _ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_compile") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest.$ac_objext; then
-  :
+if ac_fn_c_try_run "$LINENO"; then :
+  ac_cv_func_malloc_0_nonnull=yes
 else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-	case $ac_type in
-  int32_t) ac_cv_c_int32_t=yes ;;
-  *) ac_cv_c_int32_t=$ac_type ;;
-esac
+  ac_cv_func_malloc_0_nonnull=no
+fi
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
+  conftest.$ac_objext conftest.beam conftest.$ac_ext
+fi
 
 fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_func_malloc_0_nonnull" >&5
+$as_echo "$ac_cv_func_malloc_0_nonnull" >&6; }
+if test $ac_cv_func_malloc_0_nonnull = yes; then :
+
+$as_echo "#define HAVE_MALLOC 1" >>confdefs.h
 
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
 else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
+  $as_echo "#define HAVE_MALLOC 0" >>confdefs.h
+
+   case " $LIBOBJS " in
+  *" malloc.$ac_objext "* ) ;;
+  *) LIBOBJS="$LIBOBJS malloc.$ac_objext"
+ ;;
+esac
 
 
-fi
+$as_echo "#define malloc rpl_malloc" >>confdefs.h
 
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-       test "$ac_cv_c_int32_t" != no && break
-     done
 fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_c_int32_t" >&5
-$as_echo "$ac_cv_c_int32_t" >&6; }
-  case $ac_cv_c_int32_t in #(
-  no|yes) ;; #(
-  *)
 
-cat >>confdefs.h <<_ACEOF
-#define int32_t $ac_cv_c_int32_t
+
+for ac_header in stdlib.h
+do :
+  ac_fn_c_check_header_mongrel "$LINENO" "stdlib.h" "ac_cv_header_stdlib_h" "$ac_includes_default"
+if test "x$ac_cv_header_stdlib_h" = x""yes; then :
+  cat >>confdefs.h <<_ACEOF
+#define HAVE_STDLIB_H 1
 _ACEOF
-;;
-  esac
 
+fi
+
+done
 
-  { $as_echo "$as_me:$LINENO: checking for int64_t" >&5
-$as_echo_n "checking for int64_t... " >&6; }
-if test "${ac_cv_c_int64_t+set}" = set; then
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU libc compatible realloc" >&5
+$as_echo_n "checking for GNU libc compatible realloc... " >&6; }
+if test "${ac_cv_func_realloc_0_nonnull+set}" = set; then :
   $as_echo_n "(cached) " >&6
 else
-  ac_cv_c_int64_t=no
-     for ac_type in 'int64_t' 'int' 'long int' \
-	 'long long int' 'short int' 'signed char'; do
-       cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
+  if test "$cross_compiling" = yes; then :
+  ac_cv_func_realloc_0_nonnull=no
+else
+  cat confdefs.h - <<_ACEOF >conftest.$ac_ext
 /* end confdefs.h.  */
-$ac_includes_default
+#if defined STDC_HEADERS || defined HAVE_STDLIB_H
+# include <stdlib.h>
+#else
+char *realloc ();
+#endif
+
 int
 main ()
 {
-static int test_array [1 - 2 * !(0 < ($ac_type) (((($ac_type) 1 << (64 - 2)) - 1) * 2 + 1))];
-test_array [0] = 0
-
+return ! realloc (0, 0);
   ;
   return 0;
 }
 _ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_compile") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest.$ac_objext; then
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-$ac_includes_default
-int
-main ()
-{
-static int test_array [1 - 2 * !(($ac_type) (((($ac_type) 1 << (64 - 2)) - 1) * 2 + 1)
-		 < ($ac_type) (((($ac_type) 1 << (64 - 2)) - 1) * 2 + 2))];
-test_array [0] = 0
+if ac_fn_c_try_run "$LINENO"; then :
+  ac_cv_func_realloc_0_nonnull=yes
+else
+  ac_cv_func_realloc_0_nonnull=no
+fi
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
+  conftest.$ac_objext conftest.beam conftest.$ac_ext
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_func_realloc_0_nonnull" >&5
+$as_echo "$ac_cv_func_realloc_0_nonnull" >&6; }
+if test $ac_cv_func_realloc_0_nonnull = yes; then :
+
+$as_echo "#define HAVE_REALLOC 1" >>confdefs.h
 
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_compile") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest.$ac_objext; then
-  :
 else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
+  $as_echo "#define HAVE_REALLOC 0" >>confdefs.h
 
-	case $ac_type in
-  int64_t) ac_cv_c_int64_t=yes ;;
-  *) ac_cv_c_int64_t=$ac_type ;;
+   case " $LIBOBJS " in
+  *" realloc.$ac_objext "* ) ;;
+  *) LIBOBJS="$LIBOBJS realloc.$ac_objext"
+ ;;
 esac
 
+
+$as_echo "#define realloc rpl_realloc" >>confdefs.h
+
 fi
 
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
 
+for ac_func in memset
+do :
+  ac_fn_c_check_func "$LINENO" "memset" "ac_cv_func_memset"
+if test "x$ac_cv_func_memset" = x""yes; then :
+  cat >>confdefs.h <<_ACEOF
+#define HAVE_MEMSET 1
+_ACEOF
 
 fi
+done
 
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-       test "$ac_cv_c_int64_t" != no && break
-     done
+
+if test $targetos = _OU_TARGET_OS_MAC
+then
+    MAC_OS_X_VERSION=1000
+    ac_fn_c_check_func "$LINENO" "OSAtomicAdd32Barrier" "ac_cv_func_OSAtomicAdd32Barrier"
+if test "x$ac_cv_func_OSAtomicAdd32Barrier" = x""yes; then :
+  MAC_OS_X_VERSION=1040
 fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_c_int64_t" >&5
-$as_echo "$ac_cv_c_int64_t" >&6; }
-  case $ac_cv_c_int64_t in #(
-  no|yes) ;; #(
-  *)
+
+    ac_fn_c_check_func "$LINENO" "OSAtomicAnd32OrigBarrier" "ac_cv_func_OSAtomicAnd32OrigBarrier"
+if test "x$ac_cv_func_OSAtomicAnd32OrigBarrier" = x""yes; then :
+  MAC_OS_X_VERSION=1050
+fi
+
 
 cat >>confdefs.h <<_ACEOF
-#define int64_t $ac_cv_c_int64_t
+#define MAC_OS_X_VERSION $MAC_OS_X_VERSION
 _ACEOF
-;;
-  esac
 
+fi
+
+if test $targetos = _OU_TARGET_OS_SUNOS
+then
+    ac_fn_c_check_func "$LINENO" "atomic_inc_32_nv" "ac_cv_func_atomic_inc_32_nv"
+if test "x$ac_cv_func_atomic_inc_32_nv" = x""yes; then :
 
-  { $as_echo "$as_me:$LINENO: checking for int8_t" >&5
-$as_echo_n "checking for int8_t... " >&6; }
-if test "${ac_cv_c_int8_t+set}" = set; then
-  $as_echo_n "(cached) " >&6
 else
-  ac_cv_c_int8_t=no
-     for ac_type in 'int8_t' 'int' 'long int' \
-	 'long long int' 'short int' 'signed char'; do
-       cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-$ac_includes_default
-int
-main ()
-{
-static int test_array [1 - 2 * !(0 < ($ac_type) (((($ac_type) 1 << (8 - 2)) - 1) * 2 + 1))];
-test_array [0] = 0
+  targetos=_OU_TARGET_OS_GENUNIX
+fi
 
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_compile") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest.$ac_objext; then
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-$ac_includes_default
-int
-main ()
-{
-static int test_array [1 - 2 * !(($ac_type) (((($ac_type) 1 << (8 - 2)) - 1) * 2 + 1)
-		 < ($ac_type) (((($ac_type) 1 << (8 - 2)) - 1) * 2 + 2))];
-test_array [0] = 0
+fi
 
-  ;
-  return 0;
-}
+cat >>confdefs.h <<_ACEOF
+#define _OU_TARGET_OS $targetos
 _ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_compile") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest.$ac_objext; then
-  :
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
 
-	case $ac_type in
-  int8_t) ac_cv_c_int8_t=yes ;;
-  *) ac_cv_c_int8_t=$ac_type ;;
-esac
 
-fi
 
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
 
 
+# Check whether --with-namespace was given.
+if test "${with_namespace+set}" = set; then :
+  withval=$with_namespace; OU_NAMESPACE=$withval
 fi
 
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-       test "$ac_cv_c_int8_t" != no && break
-     done
+if test x$OU_NAMESPACE = xno -o x$OU_NAMESPACE = x
+then
+    OU_NAMESPACE="ou"
 fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_c_int8_t" >&5
-$as_echo "$ac_cv_c_int8_t" >&6; }
-  case $ac_cv_c_int8_t in #(
-  no|yes) ;; #(
-  *)
-
-cat >>confdefs.h <<_ACEOF
-#define int8_t $ac_cv_c_int8_t
-_ACEOF
-;;
-  esac
+CPPFLAGS="$CPPFLAGS -D_OU_NAMESPACE=$OU_NAMESPACE"
 
-{ $as_echo "$as_me:$LINENO: checking for size_t" >&5
-$as_echo_n "checking for size_t... " >&6; }
-if test "${ac_cv_type_size_t+set}" = set; then
-  $as_echo_n "(cached) " >&6
+# Check whether --enable-asserts was given.
+if test "${enable_asserts+set}" = set; then :
+  enableval=$enable_asserts; asserts=$enableval
 else
-  ac_cv_type_size_t=no
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
+  asserts=yes
+fi
+
+if test x$asserts = xno
+then
+    CPPFLAGS="$CPPFLAGS -DNDEBUG"
+fi
+
+ac_config_files="$ac_config_files Makefile include/ou/Makefile src/ou/Makefile test/Makefile"
+
+cat >confcache <<\_ACEOF
+# This file is a shell script that caches the results of configure
+# tests run on this system so they can be shared between configure
+# scripts and configure runs, see configure's option --config-cache.
+# It is not useful on other systems.  If it contains results you don't
+# want to keep, you may remove or edit it.
+#
+# config.status only pays attention to the cache file if you give it
+# the --recheck option to rerun configure.
+#
+# `ac_cv_env_foo' variables (set or unset) will be overridden when
+# loading this file, other *unset* `ac_cv_foo' will be assigned the
+# following values.
+
 _ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-$ac_includes_default
-int
-main ()
-{
-if (sizeof (size_t))
-       return 0;
-  ;
-  return 0;
+
+# The following way of writing the cache mishandles newlines in values,
+# but we know of no workaround that is simple, portable, and efficient.
+# So, we kill variables containing newlines.
+# Ultrix sh set writes to stderr and can't be redirected directly,
+# and sets the high bit in the cache file unless we assign to the vars.
+(
+  for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do
+    eval ac_val=\$$ac_var
+    case $ac_val in #(
+    *${as_nl}*)
+      case $ac_var in #(
+      *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5
+$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
+      esac
+      case $ac_var in #(
+      _ | IFS | as_nl) ;; #(
+      BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(
+      *) { eval $ac_var=; unset $ac_var;} ;;
+      esac ;;
+    esac
+  done
+
+  (set) 2>&1 |
+    case $as_nl`(ac_space=' '; set) 2>&1` in #(
+    *${as_nl}ac_space=\ *)
+      # `set' does not quote correctly, so add quotes: double-quote
+      # substitution turns \\\\ into \\, and sed turns \\ into \.
+      sed -n \
+	"s/'/'\\\\''/g;
+	  s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p"
+      ;; #(
+    *)
+      # `set' quotes correctly as required by POSIX, so do not add quotes.
+      sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
+      ;;
+    esac |
+    sort
+) |
+  sed '
+     /^ac_cv_env_/b end
+     t clear
+     :clear
+     s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/
+     t end
+     s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/
+     :end' >>confcache
+if diff "$cache_file" confcache >/dev/null 2>&1; then :; else
+  if test -w "$cache_file"; then
+    test "x$cache_file" != "x/dev/null" &&
+      { $as_echo "$as_me:${as_lineno-$LINENO}: updating cache $cache_file" >&5
+$as_echo "$as_me: updating cache $cache_file" >&6;}
+    cat confcache >$cache_file
+  else
+    { $as_echo "$as_me:${as_lineno-$LINENO}: not updating unwritable cache $cache_file" >&5
+$as_echo "$as_me: not updating unwritable cache $cache_file" >&6;}
+  fi
+fi
+rm -f confcache
+
+test "x$prefix" = xNONE && prefix=$ac_default_prefix
+# Let make expand exec_prefix.
+test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
+
+# Transform confdefs.h into DEFS.
+# Protect against shell expansion while executing Makefile rules.
+# Protect against Makefile macro expansion.
+#
+# If the first sed substitution is executed (which looks for macros that
+# take arguments), then branch to the quote section.  Otherwise,
+# look for a macro that doesn't take arguments.
+ac_script='
+:mline
+/\\$/{
+ N
+ s,\\\n,,
+ b mline
 }
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_compile") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest.$ac_objext; then
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-$ac_includes_default
-int
-main ()
-{
-if (sizeof ((size_t)))
-	  return 0;
-  ;
-  return 0;
+t clear
+:clear
+s/^[	 ]*#[	 ]*define[	 ][	 ]*\([^	 (][^	 (]*([^)]*)\)[	 ]*\(.*\)/-D\1=\2/g
+t quote
+s/^[	 ]*#[	 ]*define[	 ][	 ]*\([^	 ][^	 ]*\)[	 ]*\(.*\)/-D\1=\2/g
+t quote
+b any
+:quote
+s/[	 `~#$^&*(){}\\|;'\''"<>?]/\\&/g
+s/\[/\\&/g
+s/\]/\\&/g
+s/\$/$$/g
+H
+:any
+${
+	g
+	s/^\n//
+	s/\n/ /g
+	p
 }
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_compile") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest.$ac_objext; then
-  :
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
+'
+DEFS=`sed -n "$ac_script" confdefs.h`
 
-	ac_cv_type_size_t=yes
-fi
 
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
+ac_libobjs=
+ac_ltlibobjs=
+for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue
+  # 1. Remove the extension, and $U if already installed.
+  ac_script='s/\$U\././;s/\.o$//;s/\.obj$//'
+  ac_i=`$as_echo "$ac_i" | sed "$ac_script"`
+  # 2. Prepend LIBOBJDIR.  When used with automake>=1.10 LIBOBJDIR
+  #    will be set to the directory where LIBOBJS objects are built.
+  as_fn_append ac_libobjs " \${LIBOBJDIR}$ac_i\$U.$ac_objext"
+  as_fn_append ac_ltlibobjs " \${LIBOBJDIR}$ac_i"'$U.lo'
+done
+LIBOBJS=$ac_libobjs
 
+LTLIBOBJS=$ac_ltlibobjs
 
-fi
 
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then
+  as_fn_error "conditional \"AMDEP\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
 fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_type_size_t" >&5
-$as_echo "$ac_cv_type_size_t" >&6; }
-if test "x$ac_cv_type_size_t" = x""yes; then
-  :
-else
-
-cat >>confdefs.h <<_ACEOF
-#define size_t unsigned int
-_ACEOF
-
+if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then
+  as_fn_error "conditional \"am__fastdepCC\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
 fi
-
-
-  { $as_echo "$as_me:$LINENO: checking for uint16_t" >&5
-$as_echo_n "checking for uint16_t... " >&6; }
-if test "${ac_cv_c_uint16_t+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
-  ac_cv_c_uint16_t=no
-     for ac_type in 'uint16_t' 'unsigned int' 'unsigned long int' \
-	 'unsigned long long int' 'unsigned short int' 'unsigned char'; do
-       cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-$ac_includes_default
-int
-main ()
-{
-static int test_array [1 - 2 * !(($ac_type) -1 >> (16 - 1) == 1)];
-test_array [0] = 0
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_compile") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest.$ac_objext; then
-  case $ac_type in
-  uint16_t) ac_cv_c_uint16_t=yes ;;
-  *) ac_cv_c_uint16_t=$ac_type ;;
-esac
-
+ if test -n "$EXEEXT"; then
+  am__EXEEXT_TRUE=
+  am__EXEEXT_FALSE='#'
 else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-
+  am__EXEEXT_TRUE='#'
+  am__EXEEXT_FALSE=
 fi
 
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-       test "$ac_cv_c_uint16_t" != no && break
-     done
+if test -z "${am__fastdepCXX_TRUE}" && test -z "${am__fastdepCXX_FALSE}"; then
+  as_fn_error "conditional \"am__fastdepCXX\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${am__fastdepCXX_TRUE}" && test -z "${am__fastdepCXX_FALSE}"; then
+  as_fn_error "conditional \"am__fastdepCXX\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
 fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_c_uint16_t" >&5
-$as_echo "$ac_cv_c_uint16_t" >&6; }
-  case $ac_cv_c_uint16_t in #(
-  no|yes) ;; #(
-  *)
 
+: ${CONFIG_STATUS=./config.status}
+ac_write_fail=0
+ac_clean_files_save=$ac_clean_files
+ac_clean_files="$ac_clean_files $CONFIG_STATUS"
+{ $as_echo "$as_me:${as_lineno-$LINENO}: creating $CONFIG_STATUS" >&5
+$as_echo "$as_me: creating $CONFIG_STATUS" >&6;}
+as_write_fail=0
+cat >$CONFIG_STATUS <<_ASEOF || as_write_fail=1
+#! $SHELL
+# Generated by $as_me.
+# Run this file to recreate the current configuration.
+# Compiler output produced by configure, useful for debugging
+# configure, is in config.log if it exists.
 
-cat >>confdefs.h <<_ACEOF
-#define uint16_t $ac_cv_c_uint16_t
-_ACEOF
-;;
-  esac
+debug=false
+ac_cs_recheck=false
+ac_cs_silent=false
 
+SHELL=\${CONFIG_SHELL-$SHELL}
+export SHELL
+_ASEOF
+cat >>$CONFIG_STATUS <<\_ASEOF || as_write_fail=1
+## -------------------- ##
+## M4sh Initialization. ##
+## -------------------- ##
 
-  { $as_echo "$as_me:$LINENO: checking for uint32_t" >&5
-$as_echo_n "checking for uint32_t... " >&6; }
-if test "${ac_cv_c_uint32_t+set}" = set; then
-  $as_echo_n "(cached) " >&6
+# Be more Bourne compatible
+DUALCASE=1; export DUALCASE # for MKS sh
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then :
+  emulate sh
+  NULLCMD=:
+  # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
+  # is contrary to our usage.  Disable this feature.
+  alias -g '${1+"$@"}'='"$@"'
+  setopt NO_GLOB_SUBST
 else
-  ac_cv_c_uint32_t=no
-     for ac_type in 'uint32_t' 'unsigned int' 'unsigned long int' \
-	 'unsigned long long int' 'unsigned short int' 'unsigned char'; do
-       cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-$ac_includes_default
-int
-main ()
-{
-static int test_array [1 - 2 * !(($ac_type) -1 >> (32 - 1) == 1)];
-test_array [0] = 0
-
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_compile") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest.$ac_objext; then
-  case $ac_type in
-  uint32_t) ac_cv_c_uint32_t=yes ;;
-  *) ac_cv_c_uint32_t=$ac_type ;;
+  case `(set -o) 2>/dev/null` in #(
+  *posix*) :
+    set -o posix ;; #(
+  *) :
+     ;;
 esac
-
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
+fi
 
 
+as_nl='
+'
+export as_nl
+# Printing a long string crashes Solaris 7 /usr/bin/printf.
+as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
+# Prefer a ksh shell builtin over an external printf program on Solaris,
+# but without wasting forks for bash or zsh.
+if test -z "$BASH_VERSION$ZSH_VERSION" \
+    && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then
+  as_echo='print -r --'
+  as_echo_n='print -rn --'
+elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
+  as_echo='printf %s\n'
+  as_echo_n='printf %s'
+else
+  if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
+    as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
+    as_echo_n='/usr/ucb/echo -n'
+  else
+    as_echo_body='eval expr "X$1" : "X\\(.*\\)"'
+    as_echo_n_body='eval
+      arg=$1;
+      case $arg in #(
+      *"$as_nl"*)
+	expr "X$arg" : "X\\(.*\\)$as_nl";
+	arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
+      esac;
+      expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl"
+    '
+    export as_echo_n_body
+    as_echo_n='sh -c $as_echo_n_body as_echo'
+  fi
+  export as_echo_body
+  as_echo='sh -c $as_echo_body as_echo'
 fi
 
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-       test "$ac_cv_c_uint32_t" != no && break
-     done
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+  PATH_SEPARATOR=:
+  (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
+    (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
+      PATH_SEPARATOR=';'
+  }
 fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_c_uint32_t" >&5
-$as_echo "$ac_cv_c_uint32_t" >&6; }
-  case $ac_cv_c_uint32_t in #(
-  no|yes) ;; #(
-  *)
-
-cat >>confdefs.h <<\_ACEOF
-#define _UINT32_T 1
-_ACEOF
 
 
-cat >>confdefs.h <<_ACEOF
-#define uint32_t $ac_cv_c_uint32_t
-_ACEOF
-;;
-  esac
-
+# IFS
+# We need space, tab and new line, in precisely that order.  Quoting is
+# there to prevent editors from complaining about space-tab.
+# (If _AS_PATH_WALK were called with IFS unset, it would disable word
+# splitting by setting IFS to empty value.)
+IFS=" ""	$as_nl"
 
-  { $as_echo "$as_me:$LINENO: checking for uint64_t" >&5
-$as_echo_n "checking for uint64_t... " >&6; }
-if test "${ac_cv_c_uint64_t+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
-  ac_cv_c_uint64_t=no
-     for ac_type in 'uint64_t' 'unsigned int' 'unsigned long int' \
-	 'unsigned long long int' 'unsigned short int' 'unsigned char'; do
-       cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-$ac_includes_default
-int
-main ()
-{
-static int test_array [1 - 2 * !(($ac_type) -1 >> (64 - 1) == 1)];
-test_array [0] = 0
+# Find who we are.  Look in the path if we contain no directory separator.
+case $0 in #((
+  *[\\/]* ) as_myself=$0 ;;
+  *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+    test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
+  done
+IFS=$as_save_IFS
 
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_compile") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest.$ac_objext; then
-  case $ac_type in
-  uint64_t) ac_cv_c_uint64_t=yes ;;
-  *) ac_cv_c_uint64_t=$ac_type ;;
+     ;;
 esac
-
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-
+# We did not find ourselves, most probably we were run as `sh COMMAND'
+# in which case we are not to be found in the path.
+if test "x$as_myself" = x; then
+  as_myself=$0
 fi
-
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-       test "$ac_cv_c_uint64_t" != no && break
-     done
+if test ! -f "$as_myself"; then
+  $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
+  exit 1
 fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_c_uint64_t" >&5
-$as_echo "$ac_cv_c_uint64_t" >&6; }
-  case $ac_cv_c_uint64_t in #(
-  no|yes) ;; #(
-  *)
 
-cat >>confdefs.h <<\_ACEOF
-#define _UINT64_T 1
-_ACEOF
+# Unset variables that we do not need and which cause bugs (e.g. in
+# pre-3.0 UWIN ksh).  But do not cause bugs in bash 2.01; the "|| exit 1"
+# suppresses any "Segmentation fault" message there.  '((' could
+# trigger a bug in pdksh 5.2.14.
+for as_var in BASH_ENV ENV MAIL MAILPATH
+do eval test x\${$as_var+set} = xset \
+  && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || :
+done
+PS1='$ '
+PS2='> '
+PS4='+ '
+
+# NLS nuisances.
+LC_ALL=C
+export LC_ALL
+LANGUAGE=C
+export LANGUAGE
 
+# CDPATH.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
 
-cat >>confdefs.h <<_ACEOF
-#define uint64_t $ac_cv_c_uint64_t
-_ACEOF
-;;
-  esac
 
+# as_fn_error ERROR [LINENO LOG_FD]
+# ---------------------------------
+# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
+# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
+# script with status $?, using 1 if that was 0.
+as_fn_error ()
+{
+  as_status=$?; test $as_status -eq 0 && as_status=1
+  if test "$3"; then
+    as_lineno=${as_lineno-"$2"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+    $as_echo "$as_me:${as_lineno-$LINENO}: error: $1" >&$3
+  fi
+  $as_echo "$as_me: error: $1" >&2
+  as_fn_exit $as_status
+} # as_fn_error
+
+
+# as_fn_set_status STATUS
+# -----------------------
+# Set $? to STATUS, without forking.
+as_fn_set_status ()
+{
+  return $1
+} # as_fn_set_status
+
+# as_fn_exit STATUS
+# -----------------
+# Exit the shell with STATUS, even in a "trap 0" or "set -e" context.
+as_fn_exit ()
+{
+  set +e
+  as_fn_set_status $1
+  exit $1
+} # as_fn_exit
+
+# as_fn_unset VAR
+# ---------------
+# Portably unset VAR.
+as_fn_unset ()
+{
+  { eval $1=; unset $1;}
+}
+as_unset=as_fn_unset
+# as_fn_append VAR VALUE
+# ----------------------
+# Append the text in VALUE to the end of the definition contained in VAR. Take
+# advantage of any shell optimizations that allow amortized linear growth over
+# repeated appends, instead of the typical quadratic growth present in naive
+# implementations.
+if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then :
+  eval 'as_fn_append ()
+  {
+    eval $1+=\$2
+  }'
+else
+  as_fn_append ()
+  {
+    eval $1=\$$1\$2
+  }
+fi # as_fn_append
 
-  { $as_echo "$as_me:$LINENO: checking for uint8_t" >&5
-$as_echo_n "checking for uint8_t... " >&6; }
-if test "${ac_cv_c_uint8_t+set}" = set; then
-  $as_echo_n "(cached) " >&6
+# as_fn_arith ARG...
+# ------------------
+# Perform arithmetic evaluation on the ARGs, and store the result in the
+# global $as_val. Take advantage of shells that can avoid forks. The arguments
+# must be portable across $(()) and expr.
+if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then :
+  eval 'as_fn_arith ()
+  {
+    as_val=$(( $* ))
+  }'
 else
-  ac_cv_c_uint8_t=no
-     for ac_type in 'uint8_t' 'unsigned int' 'unsigned long int' \
-	 'unsigned long long int' 'unsigned short int' 'unsigned char'; do
-       cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-$ac_includes_default
-int
-main ()
-{
-static int test_array [1 - 2 * !(($ac_type) -1 >> (8 - 1) == 1)];
-test_array [0] = 0
+  as_fn_arith ()
+  {
+    as_val=`expr "$@" || test $? -eq 1`
+  }
+fi # as_fn_arith
 
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_compile") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest.$ac_objext; then
-  case $ac_type in
-  uint8_t) ac_cv_c_uint8_t=yes ;;
-  *) ac_cv_c_uint8_t=$ac_type ;;
-esac
 
+if expr a : '\(a\)' >/dev/null 2>&1 &&
+   test "X`expr 00001 : '.*\(...\)'`" = X001; then
+  as_expr=expr
 else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
+  as_expr=false
+fi
 
+if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
+  as_basename=basename
+else
+  as_basename=false
 fi
 
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-       test "$ac_cv_c_uint8_t" != no && break
-     done
+if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
+  as_dirname=dirname
+else
+  as_dirname=false
 fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_c_uint8_t" >&5
-$as_echo "$ac_cv_c_uint8_t" >&6; }
-  case $ac_cv_c_uint8_t in #(
-  no|yes) ;; #(
-  *)
 
-cat >>confdefs.h <<\_ACEOF
-#define _UINT8_T 1
-_ACEOF
+as_me=`$as_basename -- "$0" ||
+$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
+	 X"$0" : 'X\(//\)$' \| \
+	 X"$0" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X/"$0" |
+    sed '/^.*\/\([^/][^/]*\)\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\/\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\/\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
 
+# Avoid depending upon Character Ranges.
+as_cr_letters='abcdefghijklmnopqrstuvwxyz'
+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
+as_cr_Letters=$as_cr_letters$as_cr_LETTERS
+as_cr_digits='0123456789'
+as_cr_alnum=$as_cr_Letters$as_cr_digits
 
-cat >>confdefs.h <<_ACEOF
-#define uint8_t $ac_cv_c_uint8_t
-_ACEOF
-;;
-  esac
+ECHO_C= ECHO_N= ECHO_T=
+case `echo -n x` in #(((((
+-n*)
+  case `echo 'xy\c'` in
+  *c*) ECHO_T='	';;	# ECHO_T is single tab character.
+  xy)  ECHO_C='\c';;
+  *)   echo `echo ksh88 bug on AIX 6.1` > /dev/null
+       ECHO_T='	';;
+  esac;;
+*)
+  ECHO_N='-n';;
+esac
 
-{ $as_echo "$as_me:$LINENO: checking for working volatile" >&5
-$as_echo_n "checking for working volatile... " >&6; }
-if test "${ac_cv_c_volatile+set}" = set; then
-  $as_echo_n "(cached) " >&6
+rm -f conf$$ conf$$.exe conf$$.file
+if test -d conf$$.dir; then
+  rm -f conf$$.dir/conf$$.file
 else
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
+  rm -f conf$$.dir
+  mkdir conf$$.dir 2>/dev/null
+fi
+if (echo >conf$$.file) 2>/dev/null; then
+  if ln -s conf$$.file conf$$ 2>/dev/null; then
+    as_ln_s='ln -s'
+    # ... but there are two gotchas:
+    # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
+    # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
+    # In both cases, we have to default to `cp -p'.
+    ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
+      as_ln_s='cp -p'
+  elif ln conf$$.file conf$$ 2>/dev/null; then
+    as_ln_s=ln
+  else
+    as_ln_s='cp -p'
+  fi
+else
+  as_ln_s='cp -p'
+fi
+rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
+rmdir conf$$.dir 2>/dev/null
 
-int
-main ()
+
+# as_fn_mkdir_p
+# -------------
+# Create "$as_dir" as a directory, including parents if necessary.
+as_fn_mkdir_p ()
 {
 
-volatile int x;
-int * volatile y = (int *) 0;
-return !x && !y;
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_compile") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest.$ac_objext; then
-  ac_cv_c_volatile=yes
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
+  case $as_dir in #(
+  -*) as_dir=./$as_dir;;
+  esac
+  test -d "$as_dir" || eval $as_mkdir_p || {
+    as_dirs=
+    while :; do
+      case $as_dir in #(
+      *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
+      *) as_qdir=$as_dir;;
+      esac
+      as_dirs="'$as_qdir' $as_dirs"
+      as_dir=`$as_dirname -- "$as_dir" ||
+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$as_dir" : 'X\(//\)[^/]' \| \
+	 X"$as_dir" : 'X\(//\)$' \| \
+	 X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$as_dir" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+      test -d "$as_dir" && break
+    done
+    test -z "$as_dirs" || eval "mkdir $as_dirs"
+  } || test -d "$as_dir" || as_fn_error "cannot create directory $as_dir"
 
-	ac_cv_c_volatile=no
-fi
 
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+} # as_fn_mkdir_p
+if mkdir -p . 2>/dev/null; then
+  as_mkdir_p='mkdir -p "$as_dir"'
+else
+  test -d ./-p && rmdir ./-p
+  as_mkdir_p=false
 fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_c_volatile" >&5
-$as_echo "$ac_cv_c_volatile" >&6; }
-if test $ac_cv_c_volatile = no; then
-
-cat >>confdefs.h <<\_ACEOF
-#define volatile /**/
-_ACEOF
 
+if test -x / >/dev/null 2>&1; then
+  as_test_x='test -x'
+else
+  if ls -dL / >/dev/null 2>&1; then
+    as_ls_L_option=L
+  else
+    as_ls_L_option=
+  fi
+  as_test_x='
+    eval sh -c '\''
+      if test -d "$1"; then
+	test -d "$1/.";
+      else
+	case $1 in #(
+	-*)set "./$1";;
+	esac;
+	case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in #((
+	???[sx]*):;;*)false;;esac;fi
+    '\'' sh
+  '
 fi
+as_executable_p=$as_test_x
 
-{ $as_echo "$as_me:$LINENO: checking for ptrdiff_t" >&5
-$as_echo_n "checking for ptrdiff_t... " >&6; }
-if test "${ac_cv_type_ptrdiff_t+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
-  ac_cv_type_ptrdiff_t=no
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-$ac_includes_default
-int
-main ()
-{
-if (sizeof (ptrdiff_t))
-       return 0;
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_compile") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest.$ac_objext; then
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-$ac_includes_default
-int
-main ()
-{
-if (sizeof ((ptrdiff_t)))
-	  return 0;
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_compile") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest.$ac_objext; then
-  :
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
+# Sed expression to map a string onto a valid CPP name.
+as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
+
+# Sed expression to map a string onto a valid variable name.
+as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
 
-	ac_cv_type_ptrdiff_t=yes
-fi
 
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
+exec 6>&1
+## ----------------------------------- ##
+## Main body of $CONFIG_STATUS script. ##
+## ----------------------------------- ##
+_ASEOF
+test $as_write_fail = 0 && chmod +x $CONFIG_STATUS || ac_write_fail=1
 
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+# Save the log message, to keep $0 and so on meaningful, and to
+# report actual input values of CONFIG_FILES etc. instead of their
+# values after options handling.
+ac_log="
+This file was extended by ou $as_me 0, which was
+generated by GNU Autoconf 2.64.  Invocation command line was
 
-fi
+  CONFIG_FILES    = $CONFIG_FILES
+  CONFIG_HEADERS  = $CONFIG_HEADERS
+  CONFIG_LINKS    = $CONFIG_LINKS
+  CONFIG_COMMANDS = $CONFIG_COMMANDS
+  $ $0 $@
 
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_type_ptrdiff_t" >&5
-$as_echo "$ac_cv_type_ptrdiff_t" >&6; }
-if test "x$ac_cv_type_ptrdiff_t" = x""yes; then
+on `(hostname || uname -n) 2>/dev/null | sed 1q`
+"
 
-cat >>confdefs.h <<_ACEOF
-#define HAVE_PTRDIFF_T 1
 _ACEOF
 
+case $ac_config_files in *"
+"*) set x $ac_config_files; shift; ac_config_files=$*;;
+esac
 
-fi
 
 
-# Checks for library functions.
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+# Files that config.status was made for.
+config_files="$ac_config_files"
+config_commands="$ac_config_commands"
 
-for ac_header in stdlib.h
-do
-as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
-  { $as_echo "$as_me:$LINENO: checking for $ac_header" >&5
-$as_echo_n "checking for $ac_header... " >&6; }
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
-  $as_echo_n "(cached) " >&6
-fi
-ac_res=`eval 'as_val=${'$as_ac_Header'}
-		 $as_echo "$as_val"'`
-	       { $as_echo "$as_me:$LINENO: result: $ac_res" >&5
-$as_echo "$ac_res" >&6; }
-else
-  # Is the header compilable?
-{ $as_echo "$as_me:$LINENO: checking $ac_header usability" >&5
-$as_echo_n "checking $ac_header usability... " >&6; }
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-$ac_includes_default
-#include <$ac_header>
 _ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_compile") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest.$ac_objext; then
-  ac_header_compiler=yes
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
 
-	ac_header_compiler=no
-fi
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+ac_cs_usage="\
+\`$as_me' instantiates files and other configuration actions
+from templates according to the current configuration.  Unless the files
+and actions are specified as TAGs, all are instantiated by default.
 
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-{ $as_echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
-$as_echo "$ac_header_compiler" >&6; }
+Usage: $0 [OPTION]... [TAG]...
+
+  -h, --help       print this help, then exit
+  -V, --version    print version number and configuration settings, then exit
+  -q, --quiet, --silent
+                   do not print progress messages
+  -d, --debug      don't remove temporary files
+      --recheck    update $as_me by reconfiguring in the same conditions
+      --file=FILE[:TEMPLATE]
+                   instantiate the configuration file FILE
+
+Configuration files:
+$config_files
+
+Configuration commands:
+$config_commands
+
+Report bugs to <oleh_derevenko@users.sourceforge.net>."
 
-# Is the header present?
-{ $as_echo "$as_me:$LINENO: checking $ac_header presence" >&5
-$as_echo_n "checking $ac_header presence... " >&6; }
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-#include <$ac_header>
 _ACEOF
-if { (ac_try="$ac_cpp conftest.$ac_ext"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } >/dev/null && {
-	 test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       }; then
-  ac_header_preproc=yes
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+ac_cs_version="\\
+ou config.status 0
+configured by $0, generated by GNU Autoconf 2.64,
+  with options \\"`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`\\"
 
-  ac_header_preproc=no
-fi
+Copyright (C) 2009 Free Software Foundation, Inc.
+This config.status script is free software; the Free Software Foundation
+gives unlimited permission to copy, distribute and modify it."
 
-rm -f conftest.err conftest.$ac_ext
-{ $as_echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
-$as_echo "$ac_header_preproc" >&6; }
+ac_pwd='$ac_pwd'
+srcdir='$srcdir'
+INSTALL='$INSTALL'
+MKDIR_P='$MKDIR_P'
+AWK='$AWK'
+test -n "\$AWK" || AWK=awk
+_ACEOF
 
-# So?  What about this header?
-case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in
-  yes:no: )
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
-$as_echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5
-$as_echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;}
-    ac_header_preproc=yes
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+# The default lists apply if the user does not specify any file.
+ac_need_defaults=:
+while test $# != 0
+do
+  case $1 in
+  --*=*)
+    ac_option=`expr "X$1" : 'X\([^=]*\)='`
+    ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'`
+    ac_shift=:
     ;;
-  no:yes:* )
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5
-$as_echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header:     check for missing prerequisite headers?" >&5
-$as_echo "$as_me: WARNING: $ac_header:     check for missing prerequisite headers?" >&2;}
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5
-$as_echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;}
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header:     section \"Present But Cannot Be Compiled\"" >&5
-$as_echo "$as_me: WARNING: $ac_header:     section \"Present But Cannot Be Compiled\"" >&2;}
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
-$as_echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5
-$as_echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;}
-    ( cat <<\_ASBOX
-## --------------------------------------------------- ##
-## Report this to oleh_derevenko@users.sourceforge.net ##
-## --------------------------------------------------- ##
-_ASBOX
-     ) | sed "s/^/$as_me: WARNING:     /" >&2
+  *)
+    ac_option=$1
+    ac_optarg=$2
+    ac_shift=shift
     ;;
-esac
-{ $as_echo "$as_me:$LINENO: checking for $ac_header" >&5
-$as_echo_n "checking for $ac_header... " >&6; }
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
-  $as_echo_n "(cached) " >&6
-else
-  eval "$as_ac_Header=\$ac_header_preproc"
-fi
-ac_res=`eval 'as_val=${'$as_ac_Header'}
-		 $as_echo "$as_val"'`
-	       { $as_echo "$as_me:$LINENO: result: $ac_res" >&5
-$as_echo "$ac_res" >&6; }
+  esac
 
-fi
-as_val=`eval 'as_val=${'$as_ac_Header'}
-		 $as_echo "$as_val"'`
-   if test "x$as_val" = x""yes; then
-  cat >>confdefs.h <<_ACEOF
-#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
-_ACEOF
+  case $ac_option in
+  # Handling of the options.
+  -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
+    ac_cs_recheck=: ;;
+  --version | --versio | --versi | --vers | --ver | --ve | --v | -V )
+    $as_echo "$ac_cs_version"; exit ;;
+  --debug | --debu | --deb | --de | --d | -d )
+    debug=: ;;
+  --file | --fil | --fi | --f )
+    $ac_shift
+    case $ac_optarg in
+    *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;;
+    esac
+    as_fn_append CONFIG_FILES " '$ac_optarg'"
+    ac_need_defaults=false;;
+  --he | --h |  --help | --hel | -h )
+    $as_echo "$ac_cs_usage"; exit ;;
+  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+  | -silent | --silent | --silen | --sile | --sil | --si | --s)
+    ac_cs_silent=: ;;
 
-fi
+  # This is an error.
+  -*) as_fn_error "unrecognized option: \`$1'
+Try \`$0 --help' for more information." ;;
+
+  *) as_fn_append ac_config_targets " $1"
+     ac_need_defaults=false ;;
 
+  esac
+  shift
 done
 
-{ $as_echo "$as_me:$LINENO: checking for GNU libc compatible malloc" >&5
-$as_echo_n "checking for GNU libc compatible malloc... " >&6; }
-if test "${ac_cv_func_malloc_0_nonnull+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
-  if test "$cross_compiling" = yes; then
-  ac_cv_func_malloc_0_nonnull=no
-else
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
+ac_configure_extra_args=
+
+if $ac_cs_silent; then
+  exec 6>/dev/null
+  ac_configure_extra_args="$ac_configure_extra_args --silent"
+fi
+
 _ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-#if defined STDC_HEADERS || defined HAVE_STDLIB_H
-# include <stdlib.h>
-#else
-char *malloc ();
-#endif
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+if \$ac_cs_recheck; then
+  set X '$SHELL' '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
+  shift
+  \$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6
+  CONFIG_SHELL='$SHELL'
+  export CONFIG_SHELL
+  exec "\$@"
+fi
 
-int
-main ()
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+exec 5>>config.log
 {
-return ! malloc (0);
-  ;
-  return 0;
-}
+  echo
+  sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX
+## Running $as_me. ##
+_ASBOX
+  $as_echo "$ac_log"
+} >&5
+
 _ACEOF
-rm -f conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_link") 2>&5
-  ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
-  { (case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_try") 2>&5
-  ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_func_malloc_0_nonnull=yes
-else
-  $as_echo "$as_me: program exited with status $ac_status" >&5
-$as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+#
+# INIT-COMMANDS
+#
+AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"
 
-( exit $ac_status )
-ac_cv_func_malloc_0_nonnull=no
-fi
-rm -rf conftest.dSYM
-rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
-fi
 
+# The HP-UX ksh and POSIX shell print the target directory to stdout
+# if CDPATH is set.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+sed_quote_subst='$sed_quote_subst'
+double_quote_subst='$double_quote_subst'
+delay_variable_subst='$delay_variable_subst'
+AS='`$ECHO "X$AS" | $Xsed -e "$delay_single_quote_subst"`'
+DLLTOOL='`$ECHO "X$DLLTOOL" | $Xsed -e "$delay_single_quote_subst"`'
+OBJDUMP='`$ECHO "X$OBJDUMP" | $Xsed -e "$delay_single_quote_subst"`'
+macro_version='`$ECHO "X$macro_version" | $Xsed -e "$delay_single_quote_subst"`'
+macro_revision='`$ECHO "X$macro_revision" | $Xsed -e "$delay_single_quote_subst"`'
+enable_shared='`$ECHO "X$enable_shared" | $Xsed -e "$delay_single_quote_subst"`'
+enable_static='`$ECHO "X$enable_static" | $Xsed -e "$delay_single_quote_subst"`'
+pic_mode='`$ECHO "X$pic_mode" | $Xsed -e "$delay_single_quote_subst"`'
+enable_fast_install='`$ECHO "X$enable_fast_install" | $Xsed -e "$delay_single_quote_subst"`'
+host_alias='`$ECHO "X$host_alias" | $Xsed -e "$delay_single_quote_subst"`'
+host='`$ECHO "X$host" | $Xsed -e "$delay_single_quote_subst"`'
+host_os='`$ECHO "X$host_os" | $Xsed -e "$delay_single_quote_subst"`'
+build_alias='`$ECHO "X$build_alias" | $Xsed -e "$delay_single_quote_subst"`'
+build='`$ECHO "X$build" | $Xsed -e "$delay_single_quote_subst"`'
+build_os='`$ECHO "X$build_os" | $Xsed -e "$delay_single_quote_subst"`'
+SED='`$ECHO "X$SED" | $Xsed -e "$delay_single_quote_subst"`'
+Xsed='`$ECHO "X$Xsed" | $Xsed -e "$delay_single_quote_subst"`'
+GREP='`$ECHO "X$GREP" | $Xsed -e "$delay_single_quote_subst"`'
+EGREP='`$ECHO "X$EGREP" | $Xsed -e "$delay_single_quote_subst"`'
+FGREP='`$ECHO "X$FGREP" | $Xsed -e "$delay_single_quote_subst"`'
+LD='`$ECHO "X$LD" | $Xsed -e "$delay_single_quote_subst"`'
+NM='`$ECHO "X$NM" | $Xsed -e "$delay_single_quote_subst"`'
+LN_S='`$ECHO "X$LN_S" | $Xsed -e "$delay_single_quote_subst"`'
+max_cmd_len='`$ECHO "X$max_cmd_len" | $Xsed -e "$delay_single_quote_subst"`'
+ac_objext='`$ECHO "X$ac_objext" | $Xsed -e "$delay_single_quote_subst"`'
+exeext='`$ECHO "X$exeext" | $Xsed -e "$delay_single_quote_subst"`'
+lt_unset='`$ECHO "X$lt_unset" | $Xsed -e "$delay_single_quote_subst"`'
+lt_SP2NL='`$ECHO "X$lt_SP2NL" | $Xsed -e "$delay_single_quote_subst"`'
+lt_NL2SP='`$ECHO "X$lt_NL2SP" | $Xsed -e "$delay_single_quote_subst"`'
+reload_flag='`$ECHO "X$reload_flag" | $Xsed -e "$delay_single_quote_subst"`'
+reload_cmds='`$ECHO "X$reload_cmds" | $Xsed -e "$delay_single_quote_subst"`'
+deplibs_check_method='`$ECHO "X$deplibs_check_method" | $Xsed -e "$delay_single_quote_subst"`'
+file_magic_cmd='`$ECHO "X$file_magic_cmd" | $Xsed -e "$delay_single_quote_subst"`'
+AR='`$ECHO "X$AR" | $Xsed -e "$delay_single_quote_subst"`'
+AR_FLAGS='`$ECHO "X$AR_FLAGS" | $Xsed -e "$delay_single_quote_subst"`'
+STRIP='`$ECHO "X$STRIP" | $Xsed -e "$delay_single_quote_subst"`'
+RANLIB='`$ECHO "X$RANLIB" | $Xsed -e "$delay_single_quote_subst"`'
+old_postinstall_cmds='`$ECHO "X$old_postinstall_cmds" | $Xsed -e "$delay_single_quote_subst"`'
+old_postuninstall_cmds='`$ECHO "X$old_postuninstall_cmds" | $Xsed -e "$delay_single_quote_subst"`'
+old_archive_cmds='`$ECHO "X$old_archive_cmds" | $Xsed -e "$delay_single_quote_subst"`'
+CC='`$ECHO "X$CC" | $Xsed -e "$delay_single_quote_subst"`'
+CFLAGS='`$ECHO "X$CFLAGS" | $Xsed -e "$delay_single_quote_subst"`'
+compiler='`$ECHO "X$compiler" | $Xsed -e "$delay_single_quote_subst"`'
+GCC='`$ECHO "X$GCC" | $Xsed -e "$delay_single_quote_subst"`'
+lt_cv_sys_global_symbol_pipe='`$ECHO "X$lt_cv_sys_global_symbol_pipe" | $Xsed -e "$delay_single_quote_subst"`'
+lt_cv_sys_global_symbol_to_cdecl='`$ECHO "X$lt_cv_sys_global_symbol_to_cdecl" | $Xsed -e "$delay_single_quote_subst"`'
+lt_cv_sys_global_symbol_to_c_name_address='`$ECHO "X$lt_cv_sys_global_symbol_to_c_name_address" | $Xsed -e "$delay_single_quote_subst"`'
+lt_cv_sys_global_symbol_to_c_name_address_lib_prefix='`$ECHO "X$lt_cv_sys_global_symbol_to_c_name_address_lib_prefix" | $Xsed -e "$delay_single_quote_subst"`'
+objdir='`$ECHO "X$objdir" | $Xsed -e "$delay_single_quote_subst"`'
+SHELL='`$ECHO "X$SHELL" | $Xsed -e "$delay_single_quote_subst"`'
+ECHO='`$ECHO "X$ECHO" | $Xsed -e "$delay_single_quote_subst"`'
+MAGIC_CMD='`$ECHO "X$MAGIC_CMD" | $Xsed -e "$delay_single_quote_subst"`'
+lt_prog_compiler_no_builtin_flag='`$ECHO "X$lt_prog_compiler_no_builtin_flag" | $Xsed -e "$delay_single_quote_subst"`'
+lt_prog_compiler_wl='`$ECHO "X$lt_prog_compiler_wl" | $Xsed -e "$delay_single_quote_subst"`'
+lt_prog_compiler_pic='`$ECHO "X$lt_prog_compiler_pic" | $Xsed -e "$delay_single_quote_subst"`'
+lt_prog_compiler_static='`$ECHO "X$lt_prog_compiler_static" | $Xsed -e "$delay_single_quote_subst"`'
+lt_cv_prog_compiler_c_o='`$ECHO "X$lt_cv_prog_compiler_c_o" | $Xsed -e "$delay_single_quote_subst"`'
+need_locks='`$ECHO "X$need_locks" | $Xsed -e "$delay_single_quote_subst"`'
+DSYMUTIL='`$ECHO "X$DSYMUTIL" | $Xsed -e "$delay_single_quote_subst"`'
+NMEDIT='`$ECHO "X$NMEDIT" | $Xsed -e "$delay_single_quote_subst"`'
+LIPO='`$ECHO "X$LIPO" | $Xsed -e "$delay_single_quote_subst"`'
+OTOOL='`$ECHO "X$OTOOL" | $Xsed -e "$delay_single_quote_subst"`'
+OTOOL64='`$ECHO "X$OTOOL64" | $Xsed -e "$delay_single_quote_subst"`'
+libext='`$ECHO "X$libext" | $Xsed -e "$delay_single_quote_subst"`'
+shrext_cmds='`$ECHO "X$shrext_cmds" | $Xsed -e "$delay_single_quote_subst"`'
+extract_expsyms_cmds='`$ECHO "X$extract_expsyms_cmds" | $Xsed -e "$delay_single_quote_subst"`'
+archive_cmds_need_lc='`$ECHO "X$archive_cmds_need_lc" | $Xsed -e "$delay_single_quote_subst"`'
+enable_shared_with_static_runtimes='`$ECHO "X$enable_shared_with_static_runtimes" | $Xsed -e "$delay_single_quote_subst"`'
+export_dynamic_flag_spec='`$ECHO "X$export_dynamic_flag_spec" | $Xsed -e "$delay_single_quote_subst"`'
+whole_archive_flag_spec='`$ECHO "X$whole_archive_flag_spec" | $Xsed -e "$delay_single_quote_subst"`'
+compiler_needs_object='`$ECHO "X$compiler_needs_object" | $Xsed -e "$delay_single_quote_subst"`'
+old_archive_from_new_cmds='`$ECHO "X$old_archive_from_new_cmds" | $Xsed -e "$delay_single_quote_subst"`'
+old_archive_from_expsyms_cmds='`$ECHO "X$old_archive_from_expsyms_cmds" | $Xsed -e "$delay_single_quote_subst"`'
+archive_cmds='`$ECHO "X$archive_cmds" | $Xsed -e "$delay_single_quote_subst"`'
+archive_expsym_cmds='`$ECHO "X$archive_expsym_cmds" | $Xsed -e "$delay_single_quote_subst"`'
+module_cmds='`$ECHO "X$module_cmds" | $Xsed -e "$delay_single_quote_subst"`'
+module_expsym_cmds='`$ECHO "X$module_expsym_cmds" | $Xsed -e "$delay_single_quote_subst"`'
+with_gnu_ld='`$ECHO "X$with_gnu_ld" | $Xsed -e "$delay_single_quote_subst"`'
+allow_undefined_flag='`$ECHO "X$allow_undefined_flag" | $Xsed -e "$delay_single_quote_subst"`'
+no_undefined_flag='`$ECHO "X$no_undefined_flag" | $Xsed -e "$delay_single_quote_subst"`'
+hardcode_libdir_flag_spec='`$ECHO "X$hardcode_libdir_flag_spec" | $Xsed -e "$delay_single_quote_subst"`'
+hardcode_libdir_flag_spec_ld='`$ECHO "X$hardcode_libdir_flag_spec_ld" | $Xsed -e "$delay_single_quote_subst"`'
+hardcode_libdir_separator='`$ECHO "X$hardcode_libdir_separator" | $Xsed -e "$delay_single_quote_subst"`'
+hardcode_direct='`$ECHO "X$hardcode_direct" | $Xsed -e "$delay_single_quote_subst"`'
+hardcode_direct_absolute='`$ECHO "X$hardcode_direct_absolute" | $Xsed -e "$delay_single_quote_subst"`'
+hardcode_minus_L='`$ECHO "X$hardcode_minus_L" | $Xsed -e "$delay_single_quote_subst"`'
+hardcode_shlibpath_var='`$ECHO "X$hardcode_shlibpath_var" | $Xsed -e "$delay_single_quote_subst"`'
+hardcode_automatic='`$ECHO "X$hardcode_automatic" | $Xsed -e "$delay_single_quote_subst"`'
+inherit_rpath='`$ECHO "X$inherit_rpath" | $Xsed -e "$delay_single_quote_subst"`'
+link_all_deplibs='`$ECHO "X$link_all_deplibs" | $Xsed -e "$delay_single_quote_subst"`'
+fix_srcfile_path='`$ECHO "X$fix_srcfile_path" | $Xsed -e "$delay_single_quote_subst"`'
+always_export_symbols='`$ECHO "X$always_export_symbols" | $Xsed -e "$delay_single_quote_subst"`'
+export_symbols_cmds='`$ECHO "X$export_symbols_cmds" | $Xsed -e "$delay_single_quote_subst"`'
+exclude_expsyms='`$ECHO "X$exclude_expsyms" | $Xsed -e "$delay_single_quote_subst"`'
+include_expsyms='`$ECHO "X$include_expsyms" | $Xsed -e "$delay_single_quote_subst"`'
+prelink_cmds='`$ECHO "X$prelink_cmds" | $Xsed -e "$delay_single_quote_subst"`'
+file_list_spec='`$ECHO "X$file_list_spec" | $Xsed -e "$delay_single_quote_subst"`'
+variables_saved_for_relink='`$ECHO "X$variables_saved_for_relink" | $Xsed -e "$delay_single_quote_subst"`'
+need_lib_prefix='`$ECHO "X$need_lib_prefix" | $Xsed -e "$delay_single_quote_subst"`'
+need_version='`$ECHO "X$need_version" | $Xsed -e "$delay_single_quote_subst"`'
+version_type='`$ECHO "X$version_type" | $Xsed -e "$delay_single_quote_subst"`'
+runpath_var='`$ECHO "X$runpath_var" | $Xsed -e "$delay_single_quote_subst"`'
+shlibpath_var='`$ECHO "X$shlibpath_var" | $Xsed -e "$delay_single_quote_subst"`'
+shlibpath_overrides_runpath='`$ECHO "X$shlibpath_overrides_runpath" | $Xsed -e "$delay_single_quote_subst"`'
+libname_spec='`$ECHO "X$libname_spec" | $Xsed -e "$delay_single_quote_subst"`'
+library_names_spec='`$ECHO "X$library_names_spec" | $Xsed -e "$delay_single_quote_subst"`'
+soname_spec='`$ECHO "X$soname_spec" | $Xsed -e "$delay_single_quote_subst"`'
+postinstall_cmds='`$ECHO "X$postinstall_cmds" | $Xsed -e "$delay_single_quote_subst"`'
+postuninstall_cmds='`$ECHO "X$postuninstall_cmds" | $Xsed -e "$delay_single_quote_subst"`'
+finish_cmds='`$ECHO "X$finish_cmds" | $Xsed -e "$delay_single_quote_subst"`'
+finish_eval='`$ECHO "X$finish_eval" | $Xsed -e "$delay_single_quote_subst"`'
+hardcode_into_libs='`$ECHO "X$hardcode_into_libs" | $Xsed -e "$delay_single_quote_subst"`'
+sys_lib_search_path_spec='`$ECHO "X$sys_lib_search_path_spec" | $Xsed -e "$delay_single_quote_subst"`'
+sys_lib_dlsearch_path_spec='`$ECHO "X$sys_lib_dlsearch_path_spec" | $Xsed -e "$delay_single_quote_subst"`'
+hardcode_action='`$ECHO "X$hardcode_action" | $Xsed -e "$delay_single_quote_subst"`'
+enable_dlopen='`$ECHO "X$enable_dlopen" | $Xsed -e "$delay_single_quote_subst"`'
+enable_dlopen_self='`$ECHO "X$enable_dlopen_self" | $Xsed -e "$delay_single_quote_subst"`'
+enable_dlopen_self_static='`$ECHO "X$enable_dlopen_self_static" | $Xsed -e "$delay_single_quote_subst"`'
+old_striplib='`$ECHO "X$old_striplib" | $Xsed -e "$delay_single_quote_subst"`'
+striplib='`$ECHO "X$striplib" | $Xsed -e "$delay_single_quote_subst"`'
+compiler_lib_search_dirs='`$ECHO "X$compiler_lib_search_dirs" | $Xsed -e "$delay_single_quote_subst"`'
+predep_objects='`$ECHO "X$predep_objects" | $Xsed -e "$delay_single_quote_subst"`'
+postdep_objects='`$ECHO "X$postdep_objects" | $Xsed -e "$delay_single_quote_subst"`'
+predeps='`$ECHO "X$predeps" | $Xsed -e "$delay_single_quote_subst"`'
+postdeps='`$ECHO "X$postdeps" | $Xsed -e "$delay_single_quote_subst"`'
+compiler_lib_search_path='`$ECHO "X$compiler_lib_search_path" | $Xsed -e "$delay_single_quote_subst"`'
+LD_CXX='`$ECHO "X$LD_CXX" | $Xsed -e "$delay_single_quote_subst"`'
+old_archive_cmds_CXX='`$ECHO "X$old_archive_cmds_CXX" | $Xsed -e "$delay_single_quote_subst"`'
+compiler_CXX='`$ECHO "X$compiler_CXX" | $Xsed -e "$delay_single_quote_subst"`'
+GCC_CXX='`$ECHO "X$GCC_CXX" | $Xsed -e "$delay_single_quote_subst"`'
+lt_prog_compiler_no_builtin_flag_CXX='`$ECHO "X$lt_prog_compiler_no_builtin_flag_CXX" | $Xsed -e "$delay_single_quote_subst"`'
+lt_prog_compiler_wl_CXX='`$ECHO "X$lt_prog_compiler_wl_CXX" | $Xsed -e "$delay_single_quote_subst"`'
+lt_prog_compiler_pic_CXX='`$ECHO "X$lt_prog_compiler_pic_CXX" | $Xsed -e "$delay_single_quote_subst"`'
+lt_prog_compiler_static_CXX='`$ECHO "X$lt_prog_compiler_static_CXX" | $Xsed -e "$delay_single_quote_subst"`'
+lt_cv_prog_compiler_c_o_CXX='`$ECHO "X$lt_cv_prog_compiler_c_o_CXX" | $Xsed -e "$delay_single_quote_subst"`'
+archive_cmds_need_lc_CXX='`$ECHO "X$archive_cmds_need_lc_CXX" | $Xsed -e "$delay_single_quote_subst"`'
+enable_shared_with_static_runtimes_CXX='`$ECHO "X$enable_shared_with_static_runtimes_CXX" | $Xsed -e "$delay_single_quote_subst"`'
+export_dynamic_flag_spec_CXX='`$ECHO "X$export_dynamic_flag_spec_CXX" | $Xsed -e "$delay_single_quote_subst"`'
+whole_archive_flag_spec_CXX='`$ECHO "X$whole_archive_flag_spec_CXX" | $Xsed -e "$delay_single_quote_subst"`'
+compiler_needs_object_CXX='`$ECHO "X$compiler_needs_object_CXX" | $Xsed -e "$delay_single_quote_subst"`'
+old_archive_from_new_cmds_CXX='`$ECHO "X$old_archive_from_new_cmds_CXX" | $Xsed -e "$delay_single_quote_subst"`'
+old_archive_from_expsyms_cmds_CXX='`$ECHO "X$old_archive_from_expsyms_cmds_CXX" | $Xsed -e "$delay_single_quote_subst"`'
+archive_cmds_CXX='`$ECHO "X$archive_cmds_CXX" | $Xsed -e "$delay_single_quote_subst"`'
+archive_expsym_cmds_CXX='`$ECHO "X$archive_expsym_cmds_CXX" | $Xsed -e "$delay_single_quote_subst"`'
+module_cmds_CXX='`$ECHO "X$module_cmds_CXX" | $Xsed -e "$delay_single_quote_subst"`'
+module_expsym_cmds_CXX='`$ECHO "X$module_expsym_cmds_CXX" | $Xsed -e "$delay_single_quote_subst"`'
+with_gnu_ld_CXX='`$ECHO "X$with_gnu_ld_CXX" | $Xsed -e "$delay_single_quote_subst"`'
+allow_undefined_flag_CXX='`$ECHO "X$allow_undefined_flag_CXX" | $Xsed -e "$delay_single_quote_subst"`'
+no_undefined_flag_CXX='`$ECHO "X$no_undefined_flag_CXX" | $Xsed -e "$delay_single_quote_subst"`'
+hardcode_libdir_flag_spec_CXX='`$ECHO "X$hardcode_libdir_flag_spec_CXX" | $Xsed -e "$delay_single_quote_subst"`'
+hardcode_libdir_flag_spec_ld_CXX='`$ECHO "X$hardcode_libdir_flag_spec_ld_CXX" | $Xsed -e "$delay_single_quote_subst"`'
+hardcode_libdir_separator_CXX='`$ECHO "X$hardcode_libdir_separator_CXX" | $Xsed -e "$delay_single_quote_subst"`'
+hardcode_direct_CXX='`$ECHO "X$hardcode_direct_CXX" | $Xsed -e "$delay_single_quote_subst"`'
+hardcode_direct_absolute_CXX='`$ECHO "X$hardcode_direct_absolute_CXX" | $Xsed -e "$delay_single_quote_subst"`'
+hardcode_minus_L_CXX='`$ECHO "X$hardcode_minus_L_CXX" | $Xsed -e "$delay_single_quote_subst"`'
+hardcode_shlibpath_var_CXX='`$ECHO "X$hardcode_shlibpath_var_CXX" | $Xsed -e "$delay_single_quote_subst"`'
+hardcode_automatic_CXX='`$ECHO "X$hardcode_automatic_CXX" | $Xsed -e "$delay_single_quote_subst"`'
+inherit_rpath_CXX='`$ECHO "X$inherit_rpath_CXX" | $Xsed -e "$delay_single_quote_subst"`'
+link_all_deplibs_CXX='`$ECHO "X$link_all_deplibs_CXX" | $Xsed -e "$delay_single_quote_subst"`'
+fix_srcfile_path_CXX='`$ECHO "X$fix_srcfile_path_CXX" | $Xsed -e "$delay_single_quote_subst"`'
+always_export_symbols_CXX='`$ECHO "X$always_export_symbols_CXX" | $Xsed -e "$delay_single_quote_subst"`'
+export_symbols_cmds_CXX='`$ECHO "X$export_symbols_cmds_CXX" | $Xsed -e "$delay_single_quote_subst"`'
+exclude_expsyms_CXX='`$ECHO "X$exclude_expsyms_CXX" | $Xsed -e "$delay_single_quote_subst"`'
+include_expsyms_CXX='`$ECHO "X$include_expsyms_CXX" | $Xsed -e "$delay_single_quote_subst"`'
+prelink_cmds_CXX='`$ECHO "X$prelink_cmds_CXX" | $Xsed -e "$delay_single_quote_subst"`'
+file_list_spec_CXX='`$ECHO "X$file_list_spec_CXX" | $Xsed -e "$delay_single_quote_subst"`'
+hardcode_action_CXX='`$ECHO "X$hardcode_action_CXX" | $Xsed -e "$delay_single_quote_subst"`'
+compiler_lib_search_dirs_CXX='`$ECHO "X$compiler_lib_search_dirs_CXX" | $Xsed -e "$delay_single_quote_subst"`'
+predep_objects_CXX='`$ECHO "X$predep_objects_CXX" | $Xsed -e "$delay_single_quote_subst"`'
+postdep_objects_CXX='`$ECHO "X$postdep_objects_CXX" | $Xsed -e "$delay_single_quote_subst"`'
+predeps_CXX='`$ECHO "X$predeps_CXX" | $Xsed -e "$delay_single_quote_subst"`'
+postdeps_CXX='`$ECHO "X$postdeps_CXX" | $Xsed -e "$delay_single_quote_subst"`'
+compiler_lib_search_path_CXX='`$ECHO "X$compiler_lib_search_path_CXX" | $Xsed -e "$delay_single_quote_subst"`'
+
+LTCC='$LTCC'
+LTCFLAGS='$LTCFLAGS'
+compiler='$compiler_DEFAULT'
+
+# Quote evaled strings.
+for var in SED \
+GREP \
+EGREP \
+FGREP \
+LD \
+NM \
+LN_S \
+lt_SP2NL \
+lt_NL2SP \
+reload_flag \
+deplibs_check_method \
+file_magic_cmd \
+AR \
+AR_FLAGS \
+STRIP \
+RANLIB \
+CC \
+CFLAGS \
+compiler \
+lt_cv_sys_global_symbol_pipe \
+lt_cv_sys_global_symbol_to_cdecl \
+lt_cv_sys_global_symbol_to_c_name_address \
+lt_cv_sys_global_symbol_to_c_name_address_lib_prefix \
+SHELL \
+ECHO \
+lt_prog_compiler_no_builtin_flag \
+lt_prog_compiler_wl \
+lt_prog_compiler_pic \
+lt_prog_compiler_static \
+lt_cv_prog_compiler_c_o \
+need_locks \
+DSYMUTIL \
+NMEDIT \
+LIPO \
+OTOOL \
+OTOOL64 \
+shrext_cmds \
+export_dynamic_flag_spec \
+whole_archive_flag_spec \
+compiler_needs_object \
+with_gnu_ld \
+allow_undefined_flag \
+no_undefined_flag \
+hardcode_libdir_flag_spec \
+hardcode_libdir_flag_spec_ld \
+hardcode_libdir_separator \
+fix_srcfile_path \
+exclude_expsyms \
+include_expsyms \
+file_list_spec \
+variables_saved_for_relink \
+libname_spec \
+library_names_spec \
+soname_spec \
+finish_eval \
+old_striplib \
+striplib \
+compiler_lib_search_dirs \
+predep_objects \
+postdep_objects \
+predeps \
+postdeps \
+compiler_lib_search_path \
+LD_CXX \
+compiler_CXX \
+lt_prog_compiler_no_builtin_flag_CXX \
+lt_prog_compiler_wl_CXX \
+lt_prog_compiler_pic_CXX \
+lt_prog_compiler_static_CXX \
+lt_cv_prog_compiler_c_o_CXX \
+export_dynamic_flag_spec_CXX \
+whole_archive_flag_spec_CXX \
+compiler_needs_object_CXX \
+with_gnu_ld_CXX \
+allow_undefined_flag_CXX \
+no_undefined_flag_CXX \
+hardcode_libdir_flag_spec_CXX \
+hardcode_libdir_flag_spec_ld_CXX \
+hardcode_libdir_separator_CXX \
+fix_srcfile_path_CXX \
+exclude_expsyms_CXX \
+include_expsyms_CXX \
+file_list_spec_CXX \
+compiler_lib_search_dirs_CXX \
+predep_objects_CXX \
+postdep_objects_CXX \
+predeps_CXX \
+postdeps_CXX \
+compiler_lib_search_path_CXX; do
+    case \`eval \\\\\$ECHO "X\\\\\$\$var"\` in
+    *[\\\\\\\`\\"\\\$]*)
+      eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"X\\\$\$var\\" | \\\$Xsed -e \\"\\\$sed_quote_subst\\"\\\`\\\\\\""
+      ;;
+    *)
+      eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
+      ;;
+    esac
+done
+
+# Double-quote double-evaled strings.
+for var in reload_cmds \
+old_postinstall_cmds \
+old_postuninstall_cmds \
+old_archive_cmds \
+extract_expsyms_cmds \
+old_archive_from_new_cmds \
+old_archive_from_expsyms_cmds \
+archive_cmds \
+archive_expsym_cmds \
+module_cmds \
+module_expsym_cmds \
+export_symbols_cmds \
+prelink_cmds \
+postinstall_cmds \
+postuninstall_cmds \
+finish_cmds \
+sys_lib_search_path_spec \
+sys_lib_dlsearch_path_spec \
+old_archive_cmds_CXX \
+old_archive_from_new_cmds_CXX \
+old_archive_from_expsyms_cmds_CXX \
+archive_cmds_CXX \
+archive_expsym_cmds_CXX \
+module_cmds_CXX \
+module_expsym_cmds_CXX \
+export_symbols_cmds_CXX \
+prelink_cmds_CXX; do
+    case \`eval \\\\\$ECHO "X\\\\\$\$var"\` in
+    *[\\\\\\\`\\"\\\$]*)
+      eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"X\\\$\$var\\" | \\\$Xsed -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\""
+      ;;
+    *)
+      eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
+      ;;
+    esac
+done
+
+# Fix-up fallback echo if it was mangled by the above quoting rules.
+case \$lt_ECHO in
+*'\\\$0 --fallback-echo"')  lt_ECHO=\`\$ECHO "X\$lt_ECHO" | \$Xsed -e 's/\\\\\\\\\\\\\\\$0 --fallback-echo"\$/\$0 --fallback-echo"/'\`
+  ;;
+esac
 
+ac_aux_dir='$ac_aux_dir'
+xsi_shell='$xsi_shell'
+lt_shell_append='$lt_shell_append'
+
+# See if we are running on zsh, and set the options which allow our
+# commands through without removal of \ escapes INIT.
+if test -n "\${ZSH_VERSION+set}" ; then
+   setopt NO_GLOB_SUBST
 fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_func_malloc_0_nonnull" >&5
-$as_echo "$ac_cv_func_malloc_0_nonnull" >&6; }
-if test $ac_cv_func_malloc_0_nonnull = yes; then
 
-cat >>confdefs.h <<\_ACEOF
-#define HAVE_MALLOC 1
-_ACEOF
 
-else
-  cat >>confdefs.h <<\_ACEOF
-#define HAVE_MALLOC 0
-_ACEOF
+    PACKAGE='$PACKAGE'
+    VERSION='$VERSION'
+    TIMESTAMP='$TIMESTAMP'
+    RM='$RM'
+    ofile='$ofile'
 
-   case " $LIBOBJS " in
-  *" malloc.$ac_objext "* ) ;;
-  *) LIBOBJS="$LIBOBJS malloc.$ac_objext"
- ;;
-esac
 
 
-cat >>confdefs.h <<\_ACEOF
-#define malloc rpl_malloc
-_ACEOF
 
-fi
 
 
+_ACEOF
 
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
 
-for ac_header in stdlib.h
+# Handling of arguments.
+for ac_config_target in $ac_config_targets
 do
-as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
-  { $as_echo "$as_me:$LINENO: checking for $ac_header" >&5
-$as_echo_n "checking for $ac_header... " >&6; }
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
-  $as_echo_n "(cached) " >&6
-fi
-ac_res=`eval 'as_val=${'$as_ac_Header'}
-		 $as_echo "$as_val"'`
-	       { $as_echo "$as_me:$LINENO: result: $ac_res" >&5
-$as_echo "$ac_res" >&6; }
-else
-  # Is the header compilable?
-{ $as_echo "$as_me:$LINENO: checking $ac_header usability" >&5
-$as_echo_n "checking $ac_header usability... " >&6; }
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-$ac_includes_default
-#include <$ac_header>
-_ACEOF
-rm -f conftest.$ac_objext
-if { (ac_try="$ac_compile"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_compile") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest.$ac_objext; then
-  ac_header_compiler=yes
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
+  case $ac_config_target in
+    "depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;;
+    "libtool") CONFIG_COMMANDS="$CONFIG_COMMANDS libtool" ;;
+    "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;;
+    "include/ou/Makefile") CONFIG_FILES="$CONFIG_FILES include/ou/Makefile" ;;
+    "src/ou/Makefile") CONFIG_FILES="$CONFIG_FILES src/ou/Makefile" ;;
+    "test/Makefile") CONFIG_FILES="$CONFIG_FILES test/Makefile" ;;
+
+  *) as_fn_error "invalid argument: \`$ac_config_target'" "$LINENO" 5;;
+  esac
+done
+
 
-	ac_header_compiler=no
+# If the user did not use the arguments to specify the items to instantiate,
+# then the envvar interface is used.  Set only those that are not.
+# We use the long form for the default assignment because of an extremely
+# bizarre bug on SunOS 4.1.3.
+if $ac_need_defaults; then
+  test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files
+  test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands
 fi
 
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-{ $as_echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
-$as_echo "$ac_header_compiler" >&6; }
+# Have a temporary directory for convenience.  Make it in the build tree
+# simply because there is no reason against having it here, and in addition,
+# creating and moving files from /tmp can sometimes cause problems.
+# Hook for its removal unless debugging.
+# Note that there is a small window in which the directory will not be cleaned:
+# after its creation but before its name has been assigned to `$tmp'.
+$debug ||
+{
+  tmp=
+  trap 'exit_status=$?
+  { test -z "$tmp" || test ! -d "$tmp" || rm -fr "$tmp"; } && exit $exit_status
+' 0
+  trap 'as_fn_exit 1' 1 2 13 15
+}
+# Create a (secure) tmp directory for tmp files.
 
-# Is the header present?
-{ $as_echo "$as_me:$LINENO: checking $ac_header presence" >&5
-$as_echo_n "checking $ac_header presence... " >&6; }
-cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-#include <$ac_header>
-_ACEOF
-if { (ac_try="$ac_cpp conftest.$ac_ext"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } >/dev/null && {
-	 test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       }; then
-  ac_header_preproc=yes
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
+{
+  tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` &&
+  test -n "$tmp" && test -d "$tmp"
+}  ||
+{
+  tmp=./conf$$-$RANDOM
+  (umask 077 && mkdir "$tmp")
+} || as_fn_error "cannot create a temporary directory in ." "$LINENO" 5
 
-  ac_header_preproc=no
-fi
+# Set up the scripts for CONFIG_FILES section.
+# No need to generate them if there are no CONFIG_FILES.
+# This happens for instance with `./config.status config.h'.
+if test -n "$CONFIG_FILES"; then
 
-rm -f conftest.err conftest.$ac_ext
-{ $as_echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
-$as_echo "$ac_header_preproc" >&6; }
 
-# So?  What about this header?
-case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in
-  yes:no: )
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
-$as_echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the compiler's result" >&5
-$as_echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;}
-    ac_header_preproc=yes
-    ;;
-  no:yes:* )
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header: present but cannot be compiled" >&5
-$as_echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header:     check for missing prerequisite headers?" >&5
-$as_echo "$as_me: WARNING: $ac_header:     check for missing prerequisite headers?" >&2;}
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header: see the Autoconf documentation" >&5
-$as_echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;}
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header:     section \"Present But Cannot Be Compiled\"" >&5
-$as_echo "$as_me: WARNING: $ac_header:     section \"Present But Cannot Be Compiled\"" >&2;}
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
-$as_echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
-    { $as_echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5
-$as_echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;}
-    ( cat <<\_ASBOX
-## --------------------------------------------------- ##
-## Report this to oleh_derevenko@users.sourceforge.net ##
-## --------------------------------------------------- ##
-_ASBOX
-     ) | sed "s/^/$as_me: WARNING:     /" >&2
-    ;;
-esac
-{ $as_echo "$as_me:$LINENO: checking for $ac_header" >&5
-$as_echo_n "checking for $ac_header... " >&6; }
-if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
-  $as_echo_n "(cached) " >&6
+ac_cr=`echo X | tr X '\015'`
+# On cygwin, bash can eat \r inside `` if the user requested igncr.
+# But we know of no other shell where ac_cr would be empty at this
+# point, so we can use a bashism as a fallback.
+if test "x$ac_cr" = x; then
+  eval ac_cr=\$\'\\r\'
+fi
+ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' </dev/null 2>/dev/null`
+if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then
+  ac_cs_awk_cr='\r'
 else
-  eval "$as_ac_Header=\$ac_header_preproc"
+  ac_cs_awk_cr=$ac_cr
 fi
-ac_res=`eval 'as_val=${'$as_ac_Header'}
-		 $as_echo "$as_val"'`
-	       { $as_echo "$as_me:$LINENO: result: $ac_res" >&5
-$as_echo "$ac_res" >&6; }
 
-fi
-as_val=`eval 'as_val=${'$as_ac_Header'}
-		 $as_echo "$as_val"'`
-   if test "x$as_val" = x""yes; then
-  cat >>confdefs.h <<_ACEOF
-#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
+echo 'BEGIN {' >"$tmp/subs1.awk" &&
 _ACEOF
 
-fi
 
+{
+  echo "cat >conf$$subs.awk <<_ACEOF" &&
+  echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' &&
+  echo "_ACEOF"
+} >conf$$subs.sh ||
+  as_fn_error "could not make $CONFIG_STATUS" "$LINENO" 5
+ac_delim_num=`echo "$ac_subst_vars" | grep -c '$'`
+ac_delim='%!_!# '
+for ac_last_try in false false false false false :; do
+  . ./conf$$subs.sh ||
+    as_fn_error "could not make $CONFIG_STATUS" "$LINENO" 5
+
+  ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X`
+  if test $ac_delim_n = $ac_delim_num; then
+    break
+  elif $ac_last_try; then
+    as_fn_error "could not make $CONFIG_STATUS" "$LINENO" 5
+  else
+    ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
+  fi
 done
+rm -f conf$$subs.sh
 
-{ $as_echo "$as_me:$LINENO: checking for GNU libc compatible realloc" >&5
-$as_echo_n "checking for GNU libc compatible realloc... " >&6; }
-if test "${ac_cv_func_realloc_0_nonnull+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
-  if test "$cross_compiling" = yes; then
-  ac_cv_func_realloc_0_nonnull=no
-else
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+cat >>"\$tmp/subs1.awk" <<\\_ACAWK &&
 _ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-#if defined STDC_HEADERS || defined HAVE_STDLIB_H
-# include <stdlib.h>
-#else
-char *realloc ();
-#endif
+sed -n '
+h
+s/^/S["/; s/!.*/"]=/
+p
+g
+s/^[^!]*!//
+:repl
+t repl
+s/'"$ac_delim"'$//
+t delim
+:nl
+h
+s/\(.\{148\}\).*/\1/
+t more1
+s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/
+p
+n
+b repl
+:more1
+s/["\\]/\\&/g; s/^/"/; s/$/"\\/
+p
+g
+s/.\{148\}//
+t nl
+:delim
+h
+s/\(.\{148\}\).*/\1/
+t more2
+s/["\\]/\\&/g; s/^/"/; s/$/"/
+p
+b
+:more2
+s/["\\]/\\&/g; s/^/"/; s/$/"\\/
+p
+g
+s/.\{148\}//
+t delim
+' <conf$$subs.awk | sed '
+/^[^""]/{
+  N
+  s/\n//
+}
+' >>$CONFIG_STATUS || ac_write_fail=1
+rm -f conf$$subs.awk
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+_ACAWK
+cat >>"\$tmp/subs1.awk" <<_ACAWK &&
+  for (key in S) S_is_set[key] = 1
+  FS = ""
 
-int
-main ()
+}
 {
-return ! realloc (0, 0);
-  ;
-  return 0;
+  line = $ 0
+  nfields = split(line, field, "@")
+  substed = 0
+  len = length(field[1])
+  for (i = 2; i < nfields; i++) {
+    key = field[i]
+    keylen = length(key)
+    if (S_is_set[key]) {
+      value = S[key]
+      line = substr(line, 1, len) "" value "" substr(line, len + keylen + 3)
+      len += length(value) + length(field[++i])
+      substed = 1
+    } else
+      len += 1 + keylen
+  }
+
+  print line
 }
+
+_ACAWK
 _ACEOF
-rm -f conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_link") 2>&5
-  ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
-  { (case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_try") 2>&5
-  ac_status=$?
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  ac_cv_func_realloc_0_nonnull=yes
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then
+  sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g"
 else
-  $as_echo "$as_me: program exited with status $ac_status" >&5
-$as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-( exit $ac_status )
-ac_cv_func_realloc_0_nonnull=no
-fi
-rm -rf conftest.dSYM
-rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
-fi
-
+  cat
+fi < "$tmp/subs1.awk" > "$tmp/subs.awk" \
+  || as_fn_error "could not setup config files machinery" "$LINENO" 5
+_ACEOF
 
+# VPATH may cause trouble with some makes, so we remove $(srcdir),
+# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and
+# trailing colons and then remove the whole line if VPATH becomes empty
+# (actually we leave an empty line to preserve line numbers).
+if test "x$srcdir" = x.; then
+  ac_vpsub='/^[	 ]*VPATH[	 ]*=/{
+s/:*\$(srcdir):*/:/
+s/:*\${srcdir}:*/:/
+s/:*@srcdir@:*/:/
+s/^\([^=]*=[	 ]*\):*/\1/
+s/:*$//
+s/^[^=]*=[	 ]*$//
+}'
 fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_func_realloc_0_nonnull" >&5
-$as_echo "$ac_cv_func_realloc_0_nonnull" >&6; }
-if test $ac_cv_func_realloc_0_nonnull = yes; then
-
-cat >>confdefs.h <<\_ACEOF
-#define HAVE_REALLOC 1
-_ACEOF
-
-else
-  cat >>confdefs.h <<\_ACEOF
-#define HAVE_REALLOC 0
-_ACEOF
 
-   case " $LIBOBJS " in
-  *" realloc.$ac_objext "* ) ;;
-  *) LIBOBJS="$LIBOBJS realloc.$ac_objext"
- ;;
-esac
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+fi # test -n "$CONFIG_FILES"
 
 
-cat >>confdefs.h <<\_ACEOF
-#define realloc rpl_realloc
-_ACEOF
+eval set X "  :F $CONFIG_FILES      :C $CONFIG_COMMANDS"
+shift
+for ac_tag
+do
+  case $ac_tag in
+  :[FHLC]) ac_mode=$ac_tag; continue;;
+  esac
+  case $ac_mode$ac_tag in
+  :[FHL]*:*);;
+  :L* | :C*:*) as_fn_error "invalid tag \`$ac_tag'" "$LINENO" 5;;
+  :[FH]-) ac_tag=-:-;;
+  :[FH]*) ac_tag=$ac_tag:$ac_tag.in;;
+  esac
+  ac_save_IFS=$IFS
+  IFS=:
+  set x $ac_tag
+  IFS=$ac_save_IFS
+  shift
+  ac_file=$1
+  shift
 
-fi
+  case $ac_mode in
+  :L) ac_source=$1;;
+  :[FH])
+    ac_file_inputs=
+    for ac_f
+    do
+      case $ac_f in
+      -) ac_f="$tmp/stdin";;
+      *) # Look for the file first in the build tree, then in the source tree
+	 # (if the path is not absolute).  The absolute path cannot be DOS-style,
+	 # because $ac_f cannot contain `:'.
+	 test -f "$ac_f" ||
+	   case $ac_f in
+	   [\\/$]*) false;;
+	   *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";;
+	   esac ||
+	   as_fn_error "cannot find input file: \`$ac_f'" "$LINENO" 5;;
+      esac
+      case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac
+      as_fn_append ac_file_inputs " '$ac_f'"
+    done
 
+    # Let's still pretend it is `configure' which instantiates (i.e., don't
+    # use $as_me), people would be surprised to read:
+    #    /* config.h.  Generated by config.status.  */
+    configure_input='Generated from '`
+	  $as_echo "$*" | sed 's|^[^:]*/||;s|:[^:]*/|, |g'
+	`' by configure.'
+    if test x"$ac_file" != x-; then
+      configure_input="$ac_file.  $configure_input"
+      { $as_echo "$as_me:${as_lineno-$LINENO}: creating $ac_file" >&5
+$as_echo "$as_me: creating $ac_file" >&6;}
+    fi
+    # Neutralize special characters interpreted by sed in replacement strings.
+    case $configure_input in #(
+    *\&* | *\|* | *\\* )
+       ac_sed_conf_input=`$as_echo "$configure_input" |
+       sed 's/[\\\\&|]/\\\\&/g'`;; #(
+    *) ac_sed_conf_input=$configure_input;;
+    esac
 
+    case $ac_tag in
+    *:-:* | *:-) cat >"$tmp/stdin" \
+      || as_fn_error "could not create $ac_file" "$LINENO" 5 ;;
+    esac
+    ;;
+  esac
 
+  ac_dir=`$as_dirname -- "$ac_file" ||
+$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$ac_file" : 'X\(//\)[^/]' \| \
+	 X"$ac_file" : 'X\(//\)$' \| \
+	 X"$ac_file" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$ac_file" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+  as_dir="$ac_dir"; as_fn_mkdir_p
+  ac_builddir=.
 
-for ac_func in memset
-do
-as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh`
-{ $as_echo "$as_me:$LINENO: checking for $ac_func" >&5
-$as_echo_n "checking for $ac_func... " >&6; }
-if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then
-  $as_echo_n "(cached) " >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-/* Define $ac_func to an innocuous variant, in case <limits.h> declares $ac_func.
-   For example, HP-UX 11i <limits.h> declares gettimeofday.  */
-#define $ac_func innocuous_$ac_func
+case "$ac_dir" in
+.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
+*)
+  ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
+  # A ".." for each directory in $ac_dir_suffix.
+  ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
+  case $ac_top_builddir_sub in
+  "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
+  *)  ac_top_build_prefix=$ac_top_builddir_sub/ ;;
+  esac ;;
+esac
+ac_abs_top_builddir=$ac_pwd
+ac_abs_builddir=$ac_pwd$ac_dir_suffix
+# for backward compatibility:
+ac_top_builddir=$ac_top_build_prefix
 
-/* System header to define __stub macros and hopefully few prototypes,
-    which can conflict with char $ac_func (); below.
-    Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-    <limits.h> exists even on freestanding compilers.  */
+case $srcdir in
+  .)  # We are building in place.
+    ac_srcdir=.
+    ac_top_srcdir=$ac_top_builddir_sub
+    ac_abs_top_srcdir=$ac_pwd ;;
+  [\\/]* | ?:[\\/]* )  # Absolute name.
+    ac_srcdir=$srcdir$ac_dir_suffix;
+    ac_top_srcdir=$srcdir
+    ac_abs_top_srcdir=$srcdir ;;
+  *) # Relative name.
+    ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
+    ac_top_srcdir=$ac_top_build_prefix$srcdir
+    ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
+esac
+ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
 
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
 
-#undef $ac_func
+  case $ac_mode in
+  :F)
+  #
+  # CONFIG_FILE
+  #
 
-/* Override any GCC internal prototype to avoid an error.
-   Use char because int might match the return type of a GCC
-   builtin and then its argument prototype would still apply.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-char $ac_func ();
-/* The GNU C library defines this for functions which it implements
-    to always fail with ENOSYS.  Some functions are actually named
-    something starting with __ and the normal name is an alias.  */
-#if defined __stub_$ac_func || defined __stub___$ac_func
-choke me
-#endif
+  case $INSTALL in
+  [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;;
+  *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;;
+  esac
+  ac_MKDIR_P=$MKDIR_P
+  case $MKDIR_P in
+  [\\/$]* | ?:[\\/]* ) ;;
+  */*) ac_MKDIR_P=$ac_top_build_prefix$MKDIR_P ;;
+  esac
+_ACEOF
 
-int
-main ()
-{
-return $ac_func ();
-  ;
-  return 0;
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+# If the template does not know about datarootdir, expand it.
+# FIXME: This hack should be removed a few years after 2.60.
+ac_datarootdir_hack=; ac_datarootdir_seen=
+ac_sed_dataroot='
+/datarootdir/ {
+  p
+  q
 }
+/@datadir@/p
+/@docdir@/p
+/@infodir@/p
+/@localedir@/p
+/@mandir@/p'
+case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in
+*datarootdir*) ac_datarootdir_seen=yes;;
+*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*)
+  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5
+$as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;}
 _ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+  ac_datarootdir_hack='
+  s&@datadir@&$datadir&g
+  s&@docdir@&$docdir&g
+  s&@infodir@&$infodir&g
+  s&@localedir@&$localedir&g
+  s&@mandir@&$mandir&g
+  s&\\\${datarootdir}&$datarootdir&g' ;;
 esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_link") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest$ac_exeext && {
-	 test "$cross_compiling" = yes ||
-	 $as_test_x conftest$ac_exeext
-       }; then
-  eval "$as_ac_var=yes"
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-	eval "$as_ac_var=no"
-fi
+_ACEOF
 
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-      conftest$ac_exeext conftest.$ac_ext
-fi
-ac_res=`eval 'as_val=${'$as_ac_var'}
-		 $as_echo "$as_val"'`
-	       { $as_echo "$as_me:$LINENO: result: $ac_res" >&5
-$as_echo "$ac_res" >&6; }
-as_val=`eval 'as_val=${'$as_ac_var'}
-		 $as_echo "$as_val"'`
-   if test "x$as_val" = x""yes; then
-  cat >>confdefs.h <<_ACEOF
-#define `$as_echo "HAVE_$ac_func" | $as_tr_cpp` 1
+# Neutralize VPATH when `$srcdir' = `.'.
+# Shell code in configure.ac might set extrasub.
+# FIXME: do we really want to maintain this feature?
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+ac_sed_extra="$ac_vpsub
+$extrasub
 _ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+:t
+/@[a-zA-Z_][a-zA-Z_0-9]*@/!b
+s|@configure_input@|$ac_sed_conf_input|;t t
+s&@top_builddir@&$ac_top_builddir_sub&;t t
+s&@top_build_prefix@&$ac_top_build_prefix&;t t
+s&@srcdir@&$ac_srcdir&;t t
+s&@abs_srcdir@&$ac_abs_srcdir&;t t
+s&@top_srcdir@&$ac_top_srcdir&;t t
+s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t
+s&@builddir@&$ac_builddir&;t t
+s&@abs_builddir@&$ac_abs_builddir&;t t
+s&@abs_top_builddir@&$ac_abs_top_builddir&;t t
+s&@INSTALL@&$ac_INSTALL&;t t
+s&@MKDIR_P@&$ac_MKDIR_P&;t t
+$ac_datarootdir_hack
+"
+eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$tmp/subs.awk" >$tmp/out \
+  || as_fn_error "could not create $ac_file" "$LINENO" 5
+
+test -z "$ac_datarootdir_hack$ac_datarootdir_seen" &&
+  { ac_out=`sed -n '/\${datarootdir}/p' "$tmp/out"`; test -n "$ac_out"; } &&
+  { ac_out=`sed -n '/^[	 ]*datarootdir[	 ]*:*=/p' "$tmp/out"`; test -z "$ac_out"; } &&
+  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a reference to the variable \`datarootdir'
+which seems to be undefined.  Please make sure it is defined." >&5
+$as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir'
+which seems to be undefined.  Please make sure it is defined." >&2;}
+
+  rm -f "$tmp/stdin"
+  case $ac_file in
+  -) cat "$tmp/out" && rm -f "$tmp/out";;
+  *) rm -f "$ac_file" && mv "$tmp/out" "$ac_file";;
+  esac \
+  || as_fn_error "could not create $ac_file" "$LINENO" 5
+ ;;
+
 
-fi
-done
+  :C)  { $as_echo "$as_me:${as_lineno-$LINENO}: executing $ac_file commands" >&5
+$as_echo "$as_me: executing $ac_file commands" >&6;}
+ ;;
+  esac
 
 
-if test $targetos = _OU_TARGET_OS_MAC
-then
-    MAC_OS_X_VERSION=1000
-    { $as_echo "$as_me:$LINENO: checking for OSAtomicAdd32Barrier" >&5
-$as_echo_n "checking for OSAtomicAdd32Barrier... " >&6; }
-if test "${ac_cv_func_OSAtomicAdd32Barrier+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-/* Define OSAtomicAdd32Barrier to an innocuous variant, in case <limits.h> declares OSAtomicAdd32Barrier.
-   For example, HP-UX 11i <limits.h> declares gettimeofday.  */
-#define OSAtomicAdd32Barrier innocuous_OSAtomicAdd32Barrier
+  case $ac_file$ac_mode in
+    "depfiles":C) test x"$AMDEP_TRUE" != x"" || {
+  # Autoconf 2.62 quotes --file arguments for eval, but not when files
+  # are listed without --file.  Let's play safe and only enable the eval
+  # if we detect the quoting.
+  case $CONFIG_FILES in
+  *\'*) eval set x "$CONFIG_FILES" ;;
+  *)   set x $CONFIG_FILES ;;
+  esac
+  shift
+  for mf
+  do
+    # Strip MF so we end up with the name of the file.
+    mf=`echo "$mf" | sed -e 's/:.*$//'`
+    # Check whether this is an Automake generated Makefile or not.
+    # We used to match only the files named `Makefile.in', but
+    # some people rename them; so instead we look at the file content.
+    # Grep'ing the first line is not enough: some people post-process
+    # each Makefile.in and add a new line on top of each file to say so.
+    # Grep'ing the whole file is not good either: AIX grep has a line
+    # limit of 2048, but all sed's we know have understand at least 4000.
+    if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then
+      dirpart=`$as_dirname -- "$mf" ||
+$as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$mf" : 'X\(//\)[^/]' \| \
+	 X"$mf" : 'X\(//\)$' \| \
+	 X"$mf" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$mf" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+    else
+      continue
+    fi
+    # Extract the definition of DEPDIR, am__include, and am__quote
+    # from the Makefile without running `make'.
+    DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
+    test -z "$DEPDIR" && continue
+    am__include=`sed -n 's/^am__include = //p' < "$mf"`
+    test -z "am__include" && continue
+    am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
+    # When using ansi2knr, U may be empty or an underscore; expand it
+    U=`sed -n 's/^U = //p' < "$mf"`
+    # Find all dependency output files, they are included files with
+    # $(DEPDIR) in their names.  We invoke sed twice because it is the
+    # simplest approach to changing $(DEPDIR) to its actual value in the
+    # expansion.
+    for file in `sed -n "
+      s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
+	 sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
+      # Make sure the directory exists.
+      test -f "$dirpart/$file" && continue
+      fdir=`$as_dirname -- "$file" ||
+$as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$file" : 'X\(//\)[^/]' \| \
+	 X"$file" : 'X\(//\)$' \| \
+	 X"$file" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$file" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+      as_dir=$dirpart/$fdir; as_fn_mkdir_p
+      # echo "creating $dirpart/$file"
+      echo '# dummy' > "$dirpart/$file"
+    done
+  done
+}
+ ;;
+    "libtool":C)
 
-/* System header to define __stub macros and hopefully few prototypes,
-    which can conflict with char OSAtomicAdd32Barrier (); below.
-    Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-    <limits.h> exists even on freestanding compilers.  */
+    # See if we are running on zsh, and set the options which allow our
+    # commands through without removal of \ escapes.
+    if test -n "${ZSH_VERSION+set}" ; then
+      setopt NO_GLOB_SUBST
+    fi
 
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
+    cfgfile="${ofile}T"
+    trap "$RM \"$cfgfile\"; exit 1" 1 2 15
+    $RM "$cfgfile"
 
-#undef OSAtomicAdd32Barrier
+    cat <<_LT_EOF >> "$cfgfile"
+#! $SHELL
 
-/* Override any GCC internal prototype to avoid an error.
-   Use char because int might match the return type of a GCC
-   builtin and then its argument prototype would still apply.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-char OSAtomicAdd32Barrier ();
-/* The GNU C library defines this for functions which it implements
-    to always fail with ENOSYS.  Some functions are actually named
-    something starting with __ and the normal name is an alias.  */
-#if defined __stub_OSAtomicAdd32Barrier || defined __stub___OSAtomicAdd32Barrier
-choke me
-#endif
+# `$ECHO "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services.
+# Generated automatically by $as_me ($PACKAGE$TIMESTAMP) $VERSION
+# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
+# NOTE: Changes made to this file will be lost: look at ltmain.sh.
+#
+#   Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,
+#                 2006, 2007, 2008 Free Software Foundation, Inc.
+#   Written by Gordon Matzigkeit, 1996
+#
+#   This file is part of GNU Libtool.
+#
+# GNU Libtool is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# As a special exception to the GNU General Public License,
+# if you distribute this file as part of a program or library that
+# is built using GNU Libtool, you may include this file under the
+# same distribution terms that you use for the rest of that program.
+#
+# GNU Libtool is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING.  If not, a copy
+# can be downloaded from http://www.gnu.org/licenses/gpl.html, or
+# obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
 
-int
-main ()
-{
-return OSAtomicAdd32Barrier ();
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_link") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest$ac_exeext && {
-	 test "$cross_compiling" = yes ||
-	 $as_test_x conftest$ac_exeext
-       }; then
-  ac_cv_func_OSAtomicAdd32Barrier=yes
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
 
-	ac_cv_func_OSAtomicAdd32Barrier=no
-fi
+# The names of the tagged configurations supported by this script.
+available_tags="CXX "
 
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-      conftest$ac_exeext conftest.$ac_ext
-fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_func_OSAtomicAdd32Barrier" >&5
-$as_echo "$ac_cv_func_OSAtomicAdd32Barrier" >&6; }
-if test "x$ac_cv_func_OSAtomicAdd32Barrier" = x""yes; then
-  MAC_OS_X_VERSION=1040
-fi
+# ### BEGIN LIBTOOL CONFIG
 
-    { $as_echo "$as_me:$LINENO: checking for OSAtomicAnd32OrigBarrier" >&5
-$as_echo_n "checking for OSAtomicAnd32OrigBarrier... " >&6; }
-if test "${ac_cv_func_OSAtomicAnd32OrigBarrier+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-/* Define OSAtomicAnd32OrigBarrier to an innocuous variant, in case <limits.h> declares OSAtomicAnd32OrigBarrier.
-   For example, HP-UX 11i <limits.h> declares gettimeofday.  */
-#define OSAtomicAnd32OrigBarrier innocuous_OSAtomicAnd32OrigBarrier
+# Assembler program.
+AS=$AS
 
-/* System header to define __stub macros and hopefully few prototypes,
-    which can conflict with char OSAtomicAnd32OrigBarrier (); below.
-    Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-    <limits.h> exists even on freestanding compilers.  */
+# DLL creation program.
+DLLTOOL=$DLLTOOL
 
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
+# Object dumper program.
+OBJDUMP=$OBJDUMP
 
-#undef OSAtomicAnd32OrigBarrier
+# Which release of libtool.m4 was used?
+macro_version=$macro_version
+macro_revision=$macro_revision
 
-/* Override any GCC internal prototype to avoid an error.
-   Use char because int might match the return type of a GCC
-   builtin and then its argument prototype would still apply.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-char OSAtomicAnd32OrigBarrier ();
-/* The GNU C library defines this for functions which it implements
-    to always fail with ENOSYS.  Some functions are actually named
-    something starting with __ and the normal name is an alias.  */
-#if defined __stub_OSAtomicAnd32OrigBarrier || defined __stub___OSAtomicAnd32OrigBarrier
-choke me
-#endif
+# Whether or not to build shared libraries.
+build_libtool_libs=$enable_shared
 
-int
-main ()
-{
-return OSAtomicAnd32OrigBarrier ();
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_link") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest$ac_exeext && {
-	 test "$cross_compiling" = yes ||
-	 $as_test_x conftest$ac_exeext
-       }; then
-  ac_cv_func_OSAtomicAnd32OrigBarrier=yes
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
+# Whether or not to build static libraries.
+build_old_libs=$enable_static
 
-	ac_cv_func_OSAtomicAnd32OrigBarrier=no
-fi
+# What type of objects to build.
+pic_mode=$pic_mode
 
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-      conftest$ac_exeext conftest.$ac_ext
-fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_func_OSAtomicAnd32OrigBarrier" >&5
-$as_echo "$ac_cv_func_OSAtomicAnd32OrigBarrier" >&6; }
-if test "x$ac_cv_func_OSAtomicAnd32OrigBarrier" = x""yes; then
-  MAC_OS_X_VERSION=1050
-fi
+# Whether or not to optimize for fast installation.
+fast_install=$enable_fast_install
 
+# The host system.
+host_alias=$host_alias
+host=$host
+host_os=$host_os
 
-cat >>confdefs.h <<_ACEOF
-#define MAC_OS_X_VERSION $MAC_OS_X_VERSION
-_ACEOF
+# The build system.
+build_alias=$build_alias
+build=$build
+build_os=$build_os
 
-fi
+# A sed program that does not truncate output.
+SED=$lt_SED
 
-if test $targetos = _OU_TARGET_OS_SUNOS
-then
-    { $as_echo "$as_me:$LINENO: checking for atomic_inc_32_nv" >&5
-$as_echo_n "checking for atomic_inc_32_nv... " >&6; }
-if test "${ac_cv_func_atomic_inc_32_nv+set}" = set; then
-  $as_echo_n "(cached) " >&6
-else
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-/* Define atomic_inc_32_nv to an innocuous variant, in case <limits.h> declares atomic_inc_32_nv.
-   For example, HP-UX 11i <limits.h> declares gettimeofday.  */
-#define atomic_inc_32_nv innocuous_atomic_inc_32_nv
+# Sed that helps us avoid accidentally triggering echo(1) options like -n.
+Xsed="\$SED -e 1s/^X//"
 
-/* System header to define __stub macros and hopefully few prototypes,
-    which can conflict with char atomic_inc_32_nv (); below.
-    Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
-    <limits.h> exists even on freestanding compilers.  */
+# A grep program that handles long lines.
+GREP=$lt_GREP
 
-#ifdef __STDC__
-# include <limits.h>
-#else
-# include <assert.h>
-#endif
+# An ERE matcher.
+EGREP=$lt_EGREP
 
-#undef atomic_inc_32_nv
+# A literal string matcher.
+FGREP=$lt_FGREP
 
-/* Override any GCC internal prototype to avoid an error.
-   Use char because int might match the return type of a GCC
-   builtin and then its argument prototype would still apply.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-char atomic_inc_32_nv ();
-/* The GNU C library defines this for functions which it implements
-    to always fail with ENOSYS.  Some functions are actually named
-    something starting with __ and the normal name is an alias.  */
-#if defined __stub_atomic_inc_32_nv || defined __stub___atomic_inc_32_nv
-choke me
-#endif
+# A BSD- or MS-compatible name lister.
+NM=$lt_NM
 
-int
-main ()
-{
-return atomic_inc_32_nv ();
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext conftest$ac_exeext
-if { (ac_try="$ac_link"
-case "(($ac_try" in
-  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
-  *) ac_try_echo=$ac_try;;
-esac
-eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\""
-$as_echo "$ac_try_echo") >&5
-  (eval "$ac_link") 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } && {
-	 test -z "$ac_c_werror_flag" ||
-	 test ! -s conftest.err
-       } && test -s conftest$ac_exeext && {
-	 test "$cross_compiling" = yes ||
-	 $as_test_x conftest$ac_exeext
-       }; then
-  ac_cv_func_atomic_inc_32_nv=yes
-else
-  $as_echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
+# Whether we need soft or hard links.
+LN_S=$lt_LN_S
 
-	ac_cv_func_atomic_inc_32_nv=no
-fi
+# What is the maximum length of a command?
+max_cmd_len=$max_cmd_len
 
-rm -rf conftest.dSYM
-rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
-      conftest$ac_exeext conftest.$ac_ext
-fi
-{ $as_echo "$as_me:$LINENO: result: $ac_cv_func_atomic_inc_32_nv" >&5
-$as_echo "$ac_cv_func_atomic_inc_32_nv" >&6; }
-if test "x$ac_cv_func_atomic_inc_32_nv" = x""yes; then
-  :
-else
-  targetos=_OU_TARGET_OS_GENUNIX
-fi
+# Object file suffix (normally "o").
+objext=$ac_objext
+
+# Executable file suffix (normally "").
+exeext=$exeext
 
-fi
+# whether the shell understands "unset".
+lt_unset=$lt_unset
 
-cat >>confdefs.h <<_ACEOF
-#define _OU_TARGET_OS $targetos
-_ACEOF
+# turn spaces into newlines.
+SP2NL=$lt_lt_SP2NL
 
+# turn newlines into spaces.
+NL2SP=$lt_lt_NL2SP
 
+# How to create reloadable object files.
+reload_flag=$lt_reload_flag
+reload_cmds=$lt_reload_cmds
 
+# Method to check whether dependent libraries are shared objects.
+deplibs_check_method=$lt_deplibs_check_method
 
+# Command to use when deplibs_check_method == "file_magic".
+file_magic_cmd=$lt_file_magic_cmd
 
-# Check whether --with-namespace was given.
-if test "${with_namespace+set}" = set; then
-  withval=$with_namespace; OU_NAMESPACE=$withval
-fi
+# The archiver.
+AR=$lt_AR
+AR_FLAGS=$lt_AR_FLAGS
 
-if test x$OU_NAMESPACE = xno -o x$OU_NAMESPACE = x
-then
-    OU_NAMESPACE="ou"
-fi
-CPPFLAGS="$CPPFLAGS -D_OU_NAMESPACE=$OU_NAMESPACE"
+# A symbol stripping program.
+STRIP=$lt_STRIP
 
-# Check whether --enable-asserts was given.
-if test "${enable_asserts+set}" = set; then
-  enableval=$enable_asserts; asserts=$enableval
-else
-  asserts=yes
-fi
+# Commands used to install an old-style archive.
+RANLIB=$lt_RANLIB
+old_postinstall_cmds=$lt_old_postinstall_cmds
+old_postuninstall_cmds=$lt_old_postuninstall_cmds
 
-if test x$asserts = xno
-then
-    CPPFLAGS="$CPPFLAGS -DNDEBUG"
-fi
+# A C compiler.
+LTCC=$lt_CC
 
-ac_config_files="$ac_config_files Makefile include/ou/Makefile src/ou/Makefile test/Makefile"
+# LTCC compiler flags.
+LTCFLAGS=$lt_CFLAGS
 
-cat >confcache <<\_ACEOF
-# This file is a shell script that caches the results of configure
-# tests run on this system so they can be shared between configure
-# scripts and configure runs, see configure's option --config-cache.
-# It is not useful on other systems.  If it contains results you don't
-# want to keep, you may remove or edit it.
-#
-# config.status only pays attention to the cache file if you give it
-# the --recheck option to rerun configure.
-#
-# `ac_cv_env_foo' variables (set or unset) will be overridden when
-# loading this file, other *unset* `ac_cv_foo' will be assigned the
-# following values.
+# Take the output of nm and produce a listing of raw symbols and C names.
+global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe
 
-_ACEOF
+# Transform the output of nm in a proper C declaration.
+global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl
 
-# The following way of writing the cache mishandles newlines in values,
-# but we know of no workaround that is simple, portable, and efficient.
-# So, we kill variables containing newlines.
-# Ultrix sh set writes to stderr and can't be redirected directly,
-# and sets the high bit in the cache file unless we assign to the vars.
-(
-  for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do
-    eval ac_val=\$$ac_var
-    case $ac_val in #(
-    *${as_nl}*)
-      case $ac_var in #(
-      *_cv_*) { $as_echo "$as_me:$LINENO: WARNING: cache variable $ac_var contains a newline" >&5
-$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
-      esac
-      case $ac_var in #(
-      _ | IFS | as_nl) ;; #(
-      BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(
-      *) $as_unset $ac_var ;;
-      esac ;;
-    esac
-  done
+# Transform the output of nm in a C name address pair.
+global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
 
-  (set) 2>&1 |
-    case $as_nl`(ac_space=' '; set) 2>&1` in #(
-    *${as_nl}ac_space=\ *)
-      # `set' does not quote correctly, so add quotes (double-quote
-      # substitution turns \\\\ into \\, and sed turns \\ into \).
-      sed -n \
-	"s/'/'\\\\''/g;
-	  s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p"
-      ;; #(
-    *)
-      # `set' quotes correctly as required by POSIX, so do not add quotes.
-      sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
-      ;;
-    esac |
-    sort
-) |
-  sed '
-     /^ac_cv_env_/b end
-     t clear
-     :clear
-     s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/
-     t end
-     s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/
-     :end' >>confcache
-if diff "$cache_file" confcache >/dev/null 2>&1; then :; else
-  if test -w "$cache_file"; then
-    test "x$cache_file" != "x/dev/null" &&
-      { $as_echo "$as_me:$LINENO: updating cache $cache_file" >&5
-$as_echo "$as_me: updating cache $cache_file" >&6;}
-    cat confcache >$cache_file
-  else
-    { $as_echo "$as_me:$LINENO: not updating unwritable cache $cache_file" >&5
-$as_echo "$as_me: not updating unwritable cache $cache_file" >&6;}
-  fi
-fi
-rm -f confcache
+# Transform the output of nm in a C name address pair when lib prefix is needed.
+global_symbol_to_c_name_address_lib_prefix=$lt_lt_cv_sys_global_symbol_to_c_name_address_lib_prefix
 
-test "x$prefix" = xNONE && prefix=$ac_default_prefix
-# Let make expand exec_prefix.
-test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
+# The name of the directory that contains temporary libtool files.
+objdir=$objdir
 
-# Transform confdefs.h into DEFS.
-# Protect against shell expansion while executing Makefile rules.
-# Protect against Makefile macro expansion.
-#
-# If the first sed substitution is executed (which looks for macros that
-# take arguments), then branch to the quote section.  Otherwise,
-# look for a macro that doesn't take arguments.
-ac_script='
-:mline
-/\\$/{
- N
- s,\\\n,,
- b mline
-}
-t clear
-:clear
-s/^[	 ]*#[	 ]*define[	 ][	 ]*\([^	 (][^	 (]*([^)]*)\)[	 ]*\(.*\)/-D\1=\2/g
-t quote
-s/^[	 ]*#[	 ]*define[	 ][	 ]*\([^	 ][^	 ]*\)[	 ]*\(.*\)/-D\1=\2/g
-t quote
-b any
-:quote
-s/[	 `~#$^&*(){}\\|;'\''"<>?]/\\&/g
-s/\[/\\&/g
-s/\]/\\&/g
-s/\$/$$/g
-H
-:any
-${
-	g
-	s/^\n//
-	s/\n/ /g
-	p
-}
-'
-DEFS=`sed -n "$ac_script" confdefs.h`
+# Shell to use when invoking shell scripts.
+SHELL=$lt_SHELL
 
+# An echo program that does not interpret backslashes.
+ECHO=$lt_ECHO
 
-ac_libobjs=
-ac_ltlibobjs=
-for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue
-  # 1. Remove the extension, and $U if already installed.
-  ac_script='s/\$U\././;s/\.o$//;s/\.obj$//'
-  ac_i=`$as_echo "$ac_i" | sed "$ac_script"`
-  # 2. Prepend LIBOBJDIR.  When used with automake>=1.10 LIBOBJDIR
-  #    will be set to the directory where LIBOBJS objects are built.
-  ac_libobjs="$ac_libobjs \${LIBOBJDIR}$ac_i\$U.$ac_objext"
-  ac_ltlibobjs="$ac_ltlibobjs \${LIBOBJDIR}$ac_i"'$U.lo'
-done
-LIBOBJS=$ac_libobjs
+# Used to examine libraries when file_magic_cmd begins with "file".
+MAGIC_CMD=$MAGIC_CMD
 
-LTLIBOBJS=$ac_ltlibobjs
+# Must we lock files when doing compilation?
+need_locks=$lt_need_locks
 
+# Tool to manipulate archived DWARF debug symbol files on Mac OS X.
+DSYMUTIL=$lt_DSYMUTIL
 
-if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then
-  { { $as_echo "$as_me:$LINENO: error: conditional \"AMDEP\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-$as_echo "$as_me: error: conditional \"AMDEP\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
-   { (exit 1); exit 1; }; }
-fi
-if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then
-  { { $as_echo "$as_me:$LINENO: error: conditional \"am__fastdepCC\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-$as_echo "$as_me: error: conditional \"am__fastdepCC\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
-   { (exit 1); exit 1; }; }
-fi
-if test -z "${am__fastdepCXX_TRUE}" && test -z "${am__fastdepCXX_FALSE}"; then
-  { { $as_echo "$as_me:$LINENO: error: conditional \"am__fastdepCXX\" was never defined.
-Usually this means the macro was only invoked conditionally." >&5
-$as_echo "$as_me: error: conditional \"am__fastdepCXX\" was never defined.
-Usually this means the macro was only invoked conditionally." >&2;}
-   { (exit 1); exit 1; }; }
-fi
+# Tool to change global to local symbols on Mac OS X.
+NMEDIT=$lt_NMEDIT
 
-: ${CONFIG_STATUS=./config.status}
-ac_write_fail=0
-ac_clean_files_save=$ac_clean_files
-ac_clean_files="$ac_clean_files $CONFIG_STATUS"
-{ $as_echo "$as_me:$LINENO: creating $CONFIG_STATUS" >&5
-$as_echo "$as_me: creating $CONFIG_STATUS" >&6;}
-cat >$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
-#! $SHELL
-# Generated by $as_me.
-# Run this file to recreate the current configuration.
-# Compiler output produced by configure, useful for debugging
-# configure, is in config.log if it exists.
+# Tool to manipulate fat objects and archives on Mac OS X.
+LIPO=$lt_LIPO
 
-debug=false
-ac_cs_recheck=false
-ac_cs_silent=false
-SHELL=\${CONFIG_SHELL-$SHELL}
-_ACEOF
+# ldd/readelf like tool for Mach-O binaries on Mac OS X.
+OTOOL=$lt_OTOOL
 
-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-## --------------------- ##
-## M4sh Initialization.  ##
-## --------------------- ##
+# ldd/readelf like tool for 64 bit Mach-O binaries on Mac OS X 10.4.
+OTOOL64=$lt_OTOOL64
 
-# Be more Bourne compatible
-DUALCASE=1; export DUALCASE # for MKS sh
-if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
-  emulate sh
-  NULLCMD=:
-  # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
-  # is contrary to our usage.  Disable this feature.
-  alias -g '${1+"$@"}'='"$@"'
-  setopt NO_GLOB_SUBST
-else
-  case `(set -o) 2>/dev/null` in
-  *posix*) set -o posix ;;
-esac
+# Old archive suffix (normally "a").
+libext=$libext
 
-fi
+# Shared library suffix (normally ".so").
+shrext_cmds=$lt_shrext_cmds
 
+# The commands to extract the exported symbol list from a shared archive.
+extract_expsyms_cmds=$lt_extract_expsyms_cmds
 
+# Variables whose values should be saved in libtool wrapper scripts and
+# restored at link time.
+variables_saved_for_relink=$lt_variables_saved_for_relink
 
+# Do we need the "lib" prefix for modules?
+need_lib_prefix=$need_lib_prefix
 
-# PATH needs CR
-# Avoid depending upon Character Ranges.
-as_cr_letters='abcdefghijklmnopqrstuvwxyz'
-as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
-as_cr_Letters=$as_cr_letters$as_cr_LETTERS
-as_cr_digits='0123456789'
-as_cr_alnum=$as_cr_Letters$as_cr_digits
+# Do we need a version for libraries?
+need_version=$need_version
 
-as_nl='
-'
-export as_nl
-# Printing a long string crashes Solaris 7 /usr/bin/printf.
-as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
-as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
-as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
-if (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
-  as_echo='printf %s\n'
-  as_echo_n='printf %s'
-else
-  if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
-    as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
-    as_echo_n='/usr/ucb/echo -n'
-  else
-    as_echo_body='eval expr "X$1" : "X\\(.*\\)"'
-    as_echo_n_body='eval
-      arg=$1;
-      case $arg in
-      *"$as_nl"*)
-	expr "X$arg" : "X\\(.*\\)$as_nl";
-	arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
-      esac;
-      expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl"
-    '
-    export as_echo_n_body
-    as_echo_n='sh -c $as_echo_n_body as_echo'
-  fi
-  export as_echo_body
-  as_echo='sh -c $as_echo_body as_echo'
-fi
+# Library versioning type.
+version_type=$version_type
 
-# The user is always right.
-if test "${PATH_SEPARATOR+set}" != set; then
-  PATH_SEPARATOR=:
-  (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
-    (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
-      PATH_SEPARATOR=';'
-  }
-fi
+# Shared library runtime path variable.
+runpath_var=$runpath_var
+
+# Shared library path variable.
+shlibpath_var=$shlibpath_var
 
-# Support unset when possible.
-if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
-  as_unset=unset
-else
-  as_unset=false
-fi
+# Is shlibpath searched before the hard-coded library search path?
+shlibpath_overrides_runpath=$shlibpath_overrides_runpath
 
+# Format of library name prefix.
+libname_spec=$lt_libname_spec
 
-# IFS
-# We need space, tab and new line, in precisely that order.  Quoting is
-# there to prevent editors from complaining about space-tab.
-# (If _AS_PATH_WALK were called with IFS unset, it would disable word
-# splitting by setting IFS to empty value.)
-IFS=" ""	$as_nl"
+# List of archive names.  First name is the real one, the rest are links.
+# The last name is the one that the linker finds with -lNAME
+library_names_spec=$lt_library_names_spec
 
-# Find who we are.  Look in the path if we contain no directory separator.
-case $0 in
-  *[\\/]* ) as_myself=$0 ;;
-  *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
-done
-IFS=$as_save_IFS
+# The coded name of the library, if different from the real name.
+soname_spec=$lt_soname_spec
 
-     ;;
-esac
-# We did not find ourselves, most probably we were run as `sh COMMAND'
-# in which case we are not to be found in the path.
-if test "x$as_myself" = x; then
-  as_myself=$0
-fi
-if test ! -f "$as_myself"; then
-  $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
-  { (exit 1); exit 1; }
-fi
+# Command to use after installation of a shared archive.
+postinstall_cmds=$lt_postinstall_cmds
 
-# Work around bugs in pre-3.0 UWIN ksh.
-for as_var in ENV MAIL MAILPATH
-do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
-done
-PS1='$ '
-PS2='> '
-PS4='+ '
+# Command to use after uninstallation of a shared archive.
+postuninstall_cmds=$lt_postuninstall_cmds
 
-# NLS nuisances.
-LC_ALL=C
-export LC_ALL
-LANGUAGE=C
-export LANGUAGE
+# Commands used to finish a libtool library installation in a directory.
+finish_cmds=$lt_finish_cmds
 
-# Required to use basename.
-if expr a : '\(a\)' >/dev/null 2>&1 &&
-   test "X`expr 00001 : '.*\(...\)'`" = X001; then
-  as_expr=expr
-else
-  as_expr=false
-fi
+# As "finish_cmds", except a single script fragment to be evaled but
+# not shown.
+finish_eval=$lt_finish_eval
 
-if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
-  as_basename=basename
-else
-  as_basename=false
-fi
+# Whether we should hardcode library paths into libraries.
+hardcode_into_libs=$hardcode_into_libs
 
+# Compile-time system search path for libraries.
+sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
 
-# Name of the executable.
-as_me=`$as_basename -- "$0" ||
-$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
-	 X"$0" : 'X\(//\)$' \| \
-	 X"$0" : 'X\(/\)' \| . 2>/dev/null ||
-$as_echo X/"$0" |
-    sed '/^.*\/\([^/][^/]*\)\/*$/{
-	    s//\1/
-	    q
-	  }
-	  /^X\/\(\/\/\)$/{
-	    s//\1/
-	    q
-	  }
-	  /^X\/\(\/\).*/{
-	    s//\1/
-	    q
-	  }
-	  s/.*/./; q'`
+# Run-time system search path for libraries.
+sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
 
-# CDPATH.
-$as_unset CDPATH
+# Whether dlopen is supported.
+dlopen_support=$enable_dlopen
 
+# Whether dlopen of programs is supported.
+dlopen_self=$enable_dlopen_self
 
+# Whether dlopen of statically linked programs is supported.
+dlopen_self_static=$enable_dlopen_self_static
 
-  as_lineno_1=$LINENO
-  as_lineno_2=$LINENO
-  test "x$as_lineno_1" != "x$as_lineno_2" &&
-  test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || {
-
-  # Create $as_me.lineno as a copy of $as_myself, but with $LINENO
-  # uniformly replaced by the line number.  The first 'sed' inserts a
-  # line-number line after each line using $LINENO; the second 'sed'
-  # does the real work.  The second script uses 'N' to pair each
-  # line-number line with the line containing $LINENO, and appends
-  # trailing '-' during substitution so that $LINENO is not a special
-  # case at line end.
-  # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
-  # scripts with optimization help from Paolo Bonzini.  Blame Lee
-  # E. McMahon (1931-1989) for sed's syntax.  :-)
-  sed -n '
-    p
-    /[$]LINENO/=
-  ' <$as_myself |
-    sed '
-      s/[$]LINENO.*/&-/
-      t lineno
-      b
-      :lineno
-      N
-      :loop
-      s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/
-      t loop
-      s/-\n.*//
-    ' >$as_me.lineno &&
-  chmod +x "$as_me.lineno" ||
-    { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2
-   { (exit 1); exit 1; }; }
+# Commands to strip libraries.
+old_striplib=$lt_old_striplib
+striplib=$lt_striplib
 
-  # Don't try to exec as it changes $[0], causing all sort of problems
-  # (the dirname of $[0] is not the place where we might find the
-  # original and so on.  Autoconf is especially sensitive to this).
-  . "./$as_me.lineno"
-  # Exit status is that of the last command.
-  exit
-}
 
+# The linker used to build libraries.
+LD=$lt_LD
 
-if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
-  as_dirname=dirname
-else
-  as_dirname=false
-fi
+# Commands used to build an old-style archive.
+old_archive_cmds=$lt_old_archive_cmds
 
-ECHO_C= ECHO_N= ECHO_T=
-case `echo -n x` in
--n*)
-  case `echo 'x\c'` in
-  *c*) ECHO_T='	';;	# ECHO_T is single tab character.
-  *)   ECHO_C='\c';;
-  esac;;
-*)
-  ECHO_N='-n';;
-esac
-if expr a : '\(a\)' >/dev/null 2>&1 &&
-   test "X`expr 00001 : '.*\(...\)'`" = X001; then
-  as_expr=expr
-else
-  as_expr=false
-fi
+# A language specific compiler.
+CC=$lt_compiler
 
-rm -f conf$$ conf$$.exe conf$$.file
-if test -d conf$$.dir; then
-  rm -f conf$$.dir/conf$$.file
-else
-  rm -f conf$$.dir
-  mkdir conf$$.dir 2>/dev/null
-fi
-if (echo >conf$$.file) 2>/dev/null; then
-  if ln -s conf$$.file conf$$ 2>/dev/null; then
-    as_ln_s='ln -s'
-    # ... but there are two gotchas:
-    # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
-    # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
-    # In both cases, we have to default to `cp -p'.
-    ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
-      as_ln_s='cp -p'
-  elif ln conf$$.file conf$$ 2>/dev/null; then
-    as_ln_s=ln
-  else
-    as_ln_s='cp -p'
-  fi
-else
-  as_ln_s='cp -p'
-fi
-rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
-rmdir conf$$.dir 2>/dev/null
+# Is the compiler the GNU compiler?
+with_gcc=$GCC
 
-if mkdir -p . 2>/dev/null; then
-  as_mkdir_p=:
-else
-  test -d ./-p && rmdir ./-p
-  as_mkdir_p=false
-fi
+# Compiler flag to turn off builtin functions.
+no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag
 
-if test -x / >/dev/null 2>&1; then
-  as_test_x='test -x'
-else
-  if ls -dL / >/dev/null 2>&1; then
-    as_ls_L_option=L
-  else
-    as_ls_L_option=
-  fi
-  as_test_x='
-    eval sh -c '\''
-      if test -d "$1"; then
-	test -d "$1/.";
-      else
-	case $1 in
-	-*)set "./$1";;
-	esac;
-	case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in
-	???[sx]*):;;*)false;;esac;fi
-    '\'' sh
-  '
-fi
-as_executable_p=$as_test_x
+# How to pass a linker flag through the compiler.
+wl=$lt_lt_prog_compiler_wl
 
-# Sed expression to map a string onto a valid CPP name.
-as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
+# Additional compiler flags for building library objects.
+pic_flag=$lt_lt_prog_compiler_pic
 
-# Sed expression to map a string onto a valid variable name.
-as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
+# Compiler flag to prevent dynamic linking.
+link_static_flag=$lt_lt_prog_compiler_static
 
+# Does compiler simultaneously support -c and -o options?
+compiler_c_o=$lt_lt_cv_prog_compiler_c_o
 
-exec 6>&1
+# Whether or not to add -lc for building shared libraries.
+build_libtool_need_lc=$archive_cmds_need_lc
 
-# Save the log message, to keep $[0] and so on meaningful, and to
-# report actual input values of CONFIG_FILES etc. instead of their
-# values after options handling.
-ac_log="
-This file was extended by ou $as_me 0, which was
-generated by GNU Autoconf 2.63.  Invocation command line was
+# Whether or not to disallow shared libs when runtime libs are static.
+allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes
 
-  CONFIG_FILES    = $CONFIG_FILES
-  CONFIG_HEADERS  = $CONFIG_HEADERS
-  CONFIG_LINKS    = $CONFIG_LINKS
-  CONFIG_COMMANDS = $CONFIG_COMMANDS
-  $ $0 $@
+# Compiler flag to allow reflexive dlopens.
+export_dynamic_flag_spec=$lt_export_dynamic_flag_spec
 
-on `(hostname || uname -n) 2>/dev/null | sed 1q`
-"
+# Compiler flag to generate shared objects directly from archives.
+whole_archive_flag_spec=$lt_whole_archive_flag_spec
 
-_ACEOF
+# Whether the compiler copes with passing no objects directly.
+compiler_needs_object=$lt_compiler_needs_object
 
-case $ac_config_files in *"
-"*) set x $ac_config_files; shift; ac_config_files=$*;;
-esac
+# Create an old-style archive from a shared archive.
+old_archive_from_new_cmds=$lt_old_archive_from_new_cmds
 
+# Create a temporary old-style archive to link instead of a shared archive.
+old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds
 
+# Commands used to build a shared archive.
+archive_cmds=$lt_archive_cmds
+archive_expsym_cmds=$lt_archive_expsym_cmds
 
-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
-# Files that config.status was made for.
-config_files="`echo $ac_config_files`"
-config_commands="`echo $ac_config_commands`"
+# Commands used to build a loadable module if different from building
+# a shared archive.
+module_cmds=$lt_module_cmds
+module_expsym_cmds=$lt_module_expsym_cmds
 
-_ACEOF
+# Whether we are building with GNU ld or not.
+with_gnu_ld=$lt_with_gnu_ld
 
-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-ac_cs_usage="\
-\`$as_me' instantiates files from templates according to the
-current configuration.
+# Flag that allows shared libraries with undefined symbols to be built.
+allow_undefined_flag=$lt_allow_undefined_flag
 
-Usage: $0 [OPTION]... [FILE]...
+# Flag that enforces no undefined symbols.
+no_undefined_flag=$lt_no_undefined_flag
 
-  -h, --help       print this help, then exit
-  -V, --version    print version number and configuration settings, then exit
-  -q, --quiet, --silent
-                   do not print progress messages
-  -d, --debug      don't remove temporary files
-      --recheck    update $as_me by reconfiguring in the same conditions
-      --file=FILE[:TEMPLATE]
-                   instantiate the configuration file FILE
+# Flag to hardcode \$libdir into a binary during linking.
+# This must work even if \$libdir does not exist
+hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec
 
-Configuration files:
-$config_files
+# If ld is used when linking, flag to hardcode \$libdir into a binary
+# during linking.  This must work even if \$libdir does not exist.
+hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld
 
-Configuration commands:
-$config_commands
+# Whether we need a single "-rpath" flag with a separated argument.
+hardcode_libdir_separator=$lt_hardcode_libdir_separator
 
-Report bugs to <bug-autoconf@gnu.org>."
+# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes
+# DIR into the resulting binary.
+hardcode_direct=$hardcode_direct
 
-_ACEOF
-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
-ac_cs_version="\\
-ou config.status 0
-configured by $0, generated by GNU Autoconf 2.63,
-  with options \\"`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`\\"
+# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes
+# DIR into the resulting binary and the resulting library dependency is
+# "absolute",i.e impossible to change by setting \${shlibpath_var} if the
+# library is relocated.
+hardcode_direct_absolute=$hardcode_direct_absolute
 
-Copyright (C) 2008 Free Software Foundation, Inc.
-This config.status script is free software; the Free Software Foundation
-gives unlimited permission to copy, distribute and modify it."
+# Set to "yes" if using the -LDIR flag during linking hardcodes DIR
+# into the resulting binary.
+hardcode_minus_L=$hardcode_minus_L
 
-ac_pwd='$ac_pwd'
-srcdir='$srcdir'
-INSTALL='$INSTALL'
-MKDIR_P='$MKDIR_P'
-AWK='$AWK'
-test -n "\$AWK" || AWK=awk
-_ACEOF
+# Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR
+# into the resulting binary.
+hardcode_shlibpath_var=$hardcode_shlibpath_var
 
-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-# The default lists apply if the user does not specify any file.
-ac_need_defaults=:
-while test $# != 0
-do
-  case $1 in
-  --*=*)
-    ac_option=`expr "X$1" : 'X\([^=]*\)='`
-    ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'`
-    ac_shift=:
-    ;;
-  *)
-    ac_option=$1
-    ac_optarg=$2
-    ac_shift=shift
-    ;;
-  esac
+# Set to "yes" if building a shared library automatically hardcodes DIR
+# into the library and all subsequent libraries and executables linked
+# against it.
+hardcode_automatic=$hardcode_automatic
 
-  case $ac_option in
-  # Handling of the options.
-  -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
-    ac_cs_recheck=: ;;
-  --version | --versio | --versi | --vers | --ver | --ve | --v | -V )
-    $as_echo "$ac_cs_version"; exit ;;
-  --debug | --debu | --deb | --de | --d | -d )
-    debug=: ;;
-  --file | --fil | --fi | --f )
-    $ac_shift
-    case $ac_optarg in
-    *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;;
-    esac
-    CONFIG_FILES="$CONFIG_FILES '$ac_optarg'"
-    ac_need_defaults=false;;
-  --he | --h |  --help | --hel | -h )
-    $as_echo "$ac_cs_usage"; exit ;;
-  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
-  | -silent | --silent | --silen | --sile | --sil | --si | --s)
-    ac_cs_silent=: ;;
+# Set to yes if linker adds runtime paths of dependent libraries
+# to runtime path list.
+inherit_rpath=$inherit_rpath
 
-  # This is an error.
-  -*) { $as_echo "$as_me: error: unrecognized option: $1
-Try \`$0 --help' for more information." >&2
-   { (exit 1); exit 1; }; } ;;
+# Whether libtool must link a program against all its dependency libraries.
+link_all_deplibs=$link_all_deplibs
 
-  *) ac_config_targets="$ac_config_targets $1"
-     ac_need_defaults=false ;;
+# Fix the shell variable \$srcfile for the compiler.
+fix_srcfile_path=$lt_fix_srcfile_path
 
-  esac
-  shift
-done
+# Set to "yes" if exported symbols are required.
+always_export_symbols=$always_export_symbols
 
-ac_configure_extra_args=
+# The commands to list exported symbols.
+export_symbols_cmds=$lt_export_symbols_cmds
 
-if $ac_cs_silent; then
-  exec 6>/dev/null
-  ac_configure_extra_args="$ac_configure_extra_args --silent"
-fi
+# Symbols that should not be listed in the preloaded symbols.
+exclude_expsyms=$lt_exclude_expsyms
 
-_ACEOF
-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
-if \$ac_cs_recheck; then
-  set X '$SHELL' '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
-  shift
-  \$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6
-  CONFIG_SHELL='$SHELL'
-  export CONFIG_SHELL
-  exec "\$@"
-fi
+# Symbols that must always be exported.
+include_expsyms=$lt_include_expsyms
 
-_ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-exec 5>>config.log
-{
-  echo
-  sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX
-## Running $as_me. ##
-_ASBOX
-  $as_echo "$ac_log"
-} >&5
+# Commands necessary for linking programs (against libraries) with templates.
+prelink_cmds=$lt_prelink_cmds
 
-_ACEOF
-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
-#
-# INIT-COMMANDS
-#
-AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"
+# Specify filename containing input files.
+file_list_spec=$lt_file_list_spec
 
-_ACEOF
+# How to hardcode a shared library path into an executable.
+hardcode_action=$hardcode_action
 
-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+# The directories searched by this compiler when creating a shared library.
+compiler_lib_search_dirs=$lt_compiler_lib_search_dirs
 
-# Handling of arguments.
-for ac_config_target in $ac_config_targets
-do
-  case $ac_config_target in
-    "depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;;
-    "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;;
-    "include/ou/Makefile") CONFIG_FILES="$CONFIG_FILES include/ou/Makefile" ;;
-    "src/ou/Makefile") CONFIG_FILES="$CONFIG_FILES src/ou/Makefile" ;;
-    "test/Makefile") CONFIG_FILES="$CONFIG_FILES test/Makefile" ;;
+# Dependencies to place before and after the objects being linked to
+# create a shared library.
+predep_objects=$lt_predep_objects
+postdep_objects=$lt_postdep_objects
+predeps=$lt_predeps
+postdeps=$lt_postdeps
 
-  *) { { $as_echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5
-$as_echo "$as_me: error: invalid argument: $ac_config_target" >&2;}
-   { (exit 1); exit 1; }; };;
-  esac
-done
+# The library search path used internally by the compiler when linking
+# a shared library.
+compiler_lib_search_path=$lt_compiler_lib_search_path
+
+# ### END LIBTOOL CONFIG
 
+_LT_EOF
 
-# If the user did not use the arguments to specify the items to instantiate,
-# then the envvar interface is used.  Set only those that are not.
-# We use the long form for the default assignment because of an extremely
-# bizarre bug on SunOS 4.1.3.
-if $ac_need_defaults; then
-  test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files
-  test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands
+  case $host_os in
+  aix3*)
+    cat <<\_LT_EOF >> "$cfgfile"
+# AIX sometimes has problems with the GCC collect2 program.  For some
+# reason, if we set the COLLECT_NAMES environment variable, the problems
+# vanish in a puff of smoke.
+if test "X${COLLECT_NAMES+set}" != Xset; then
+  COLLECT_NAMES=
+  export COLLECT_NAMES
 fi
+_LT_EOF
+    ;;
+  esac
 
-# Have a temporary directory for convenience.  Make it in the build tree
-# simply because there is no reason against having it here, and in addition,
-# creating and moving files from /tmp can sometimes cause problems.
-# Hook for its removal unless debugging.
-# Note that there is a small window in which the directory will not be cleaned:
-# after its creation but before its name has been assigned to `$tmp'.
-$debug ||
-{
-  tmp=
-  trap 'exit_status=$?
-  { test -z "$tmp" || test ! -d "$tmp" || rm -fr "$tmp"; } && exit $exit_status
-' 0
-  trap '{ (exit 1); exit 1; }' 1 2 13 15
-}
-# Create a (secure) tmp directory for tmp files.
-
-{
-  tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` &&
-  test -n "$tmp" && test -d "$tmp"
-}  ||
-{
-  tmp=./conf$$-$RANDOM
-  (umask 077 && mkdir "$tmp")
-} ||
-{
-   $as_echo "$as_me: cannot create a temporary directory in ." >&2
-   { (exit 1); exit 1; }
-}
 
-# Set up the scripts for CONFIG_FILES section.
-# No need to generate them if there are no CONFIG_FILES.
-# This happens for instance with `./config.status config.h'.
-if test -n "$CONFIG_FILES"; then
+ltmain="$ac_aux_dir/ltmain.sh"
 
 
-ac_cr='
'
-ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' </dev/null 2>/dev/null`
-if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then
-  ac_cs_awk_cr='\\r'
-else
-  ac_cs_awk_cr=$ac_cr
-fi
+  # We use sed instead of cat because bash on DJGPP gets confused if
+  # if finds mixed CR/LF and LF-only lines.  Since sed operates in
+  # text mode, it properly converts lines to CR/LF.  This bash problem
+  # is reportedly fixed, but why not run on old versions too?
+  sed '/^# Generated shell functions inserted here/q' "$ltmain" >> "$cfgfile" \
+    || (rm -f "$cfgfile"; exit 1)
 
-echo 'BEGIN {' >"$tmp/subs1.awk" &&
-_ACEOF
+  case $xsi_shell in
+  yes)
+    cat << \_LT_EOF >> "$cfgfile"
 
+# func_dirname file append nondir_replacement
+# Compute the dirname of FILE.  If nonempty, add APPEND to the result,
+# otherwise set result to NONDIR_REPLACEMENT.
+func_dirname ()
+{
+  case ${1} in
+    */*) func_dirname_result="${1%/*}${2}" ;;
+    *  ) func_dirname_result="${3}" ;;
+  esac
+}
 
+# func_basename file
+func_basename ()
 {
-  echo "cat >conf$$subs.awk <<_ACEOF" &&
-  echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' &&
-  echo "_ACEOF"
-} >conf$$subs.sh ||
-  { { $as_echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5
-$as_echo "$as_me: error: could not make $CONFIG_STATUS" >&2;}
-   { (exit 1); exit 1; }; }
-ac_delim_num=`echo "$ac_subst_vars" | grep -c '$'`
-ac_delim='%!_!# '
-for ac_last_try in false false false false false :; do
-  . ./conf$$subs.sh ||
-    { { $as_echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5
-$as_echo "$as_me: error: could not make $CONFIG_STATUS" >&2;}
-   { (exit 1); exit 1; }; }
+  func_basename_result="${1##*/}"
+}
 
-  ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X`
-  if test $ac_delim_n = $ac_delim_num; then
-    break
-  elif $ac_last_try; then
-    { { $as_echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5
-$as_echo "$as_me: error: could not make $CONFIG_STATUS" >&2;}
-   { (exit 1); exit 1; }; }
-  else
-    ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
-  fi
-done
-rm -f conf$$subs.sh
+# func_dirname_and_basename file append nondir_replacement
+# perform func_basename and func_dirname in a single function
+# call:
+#   dirname:  Compute the dirname of FILE.  If nonempty,
+#             add APPEND to the result, otherwise set result
+#             to NONDIR_REPLACEMENT.
+#             value returned in "$func_dirname_result"
+#   basename: Compute filename of FILE.
+#             value retuned in "$func_basename_result"
+# Implementation must be kept synchronized with func_dirname
+# and func_basename. For efficiency, we do not delegate to
+# those functions but instead duplicate the functionality here.
+func_dirname_and_basename ()
+{
+  case ${1} in
+    */*) func_dirname_result="${1%/*}${2}" ;;
+    *  ) func_dirname_result="${3}" ;;
+  esac
+  func_basename_result="${1##*/}"
+}
 
-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
-cat >>"\$tmp/subs1.awk" <<\\_ACAWK &&
-_ACEOF
-sed -n '
-h
-s/^/S["/; s/!.*/"]=/
-p
-g
-s/^[^!]*!//
-:repl
-t repl
-s/'"$ac_delim"'$//
-t delim
-:nl
-h
-s/\(.\{148\}\).*/\1/
-t more1
-s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/
-p
-n
-b repl
-:more1
-s/["\\]/\\&/g; s/^/"/; s/$/"\\/
-p
-g
-s/.\{148\}//
-t nl
-:delim
-h
-s/\(.\{148\}\).*/\1/
-t more2
-s/["\\]/\\&/g; s/^/"/; s/$/"/
-p
-b
-:more2
-s/["\\]/\\&/g; s/^/"/; s/$/"\\/
-p
-g
-s/.\{148\}//
-t delim
-' <conf$$subs.awk | sed '
-/^[^""]/{
-  N
-  s/\n//
+# func_stripname prefix suffix name
+# strip PREFIX and SUFFIX off of NAME.
+# PREFIX and SUFFIX must not contain globbing or regex special
+# characters, hashes, percent signs, but SUFFIX may contain a leading
+# dot (in which case that matches only a dot).
+func_stripname ()
+{
+  # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are
+  # positional parameters, so assign one to ordinary parameter first.
+  func_stripname_result=${3}
+  func_stripname_result=${func_stripname_result#"${1}"}
+  func_stripname_result=${func_stripname_result%"${2}"}
 }
-' >>$CONFIG_STATUS || ac_write_fail=1
-rm -f conf$$subs.awk
-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
-_ACAWK
-cat >>"\$tmp/subs1.awk" <<_ACAWK &&
-  for (key in S) S_is_set[key] = 1
-  FS = ""
 
+# func_opt_split
+func_opt_split ()
+{
+  func_opt_split_opt=${1%%=*}
+  func_opt_split_arg=${1#*=}
 }
+
+# func_lo2o object
+func_lo2o ()
 {
-  line = $ 0
-  nfields = split(line, field, "@")
-  substed = 0
-  len = length(field[1])
-  for (i = 2; i < nfields; i++) {
-    key = field[i]
-    keylen = length(key)
-    if (S_is_set[key]) {
-      value = S[key]
-      line = substr(line, 1, len) "" value "" substr(line, len + keylen + 3)
-      len += length(value) + length(field[++i])
-      substed = 1
-    } else
-      len += 1 + keylen
-  }
+  case ${1} in
+    *.lo) func_lo2o_result=${1%.lo}.${objext} ;;
+    *)    func_lo2o_result=${1} ;;
+  esac
+}
 
-  print line
+# func_xform libobj-or-source
+func_xform ()
+{
+  func_xform_result=${1%.*}.lo
 }
 
-_ACAWK
-_ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then
-  sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g"
-else
-  cat
-fi < "$tmp/subs1.awk" > "$tmp/subs.awk" \
-  || { { $as_echo "$as_me:$LINENO: error: could not setup config files machinery" >&5
-$as_echo "$as_me: error: could not setup config files machinery" >&2;}
-   { (exit 1); exit 1; }; }
-_ACEOF
+# func_arith arithmetic-term...
+func_arith ()
+{
+  func_arith_result=$(( $* ))
+}
 
-# VPATH may cause trouble with some makes, so we remove $(srcdir),
-# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and
-# trailing colons and then remove the whole line if VPATH becomes empty
-# (actually we leave an empty line to preserve line numbers).
-if test "x$srcdir" = x.; then
-  ac_vpsub='/^[	 ]*VPATH[	 ]*=/{
-s/:*\$(srcdir):*/:/
-s/:*\${srcdir}:*/:/
-s/:*@srcdir@:*/:/
-s/^\([^=]*=[	 ]*\):*/\1/
-s/:*$//
-s/^[^=]*=[	 ]*$//
-}'
-fi
+# func_len string
+# STRING may not start with a hyphen.
+func_len ()
+{
+  func_len_result=${#1}
+}
 
-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-fi # test -n "$CONFIG_FILES"
+_LT_EOF
+    ;;
+  *) # Bourne compatible functions.
+    cat << \_LT_EOF >> "$cfgfile"
+
+# func_dirname file append nondir_replacement
+# Compute the dirname of FILE.  If nonempty, add APPEND to the result,
+# otherwise set result to NONDIR_REPLACEMENT.
+func_dirname ()
+{
+  # Extract subdirectory from the argument.
+  func_dirname_result=`$ECHO "X${1}" | $Xsed -e "$dirname"`
+  if test "X$func_dirname_result" = "X${1}"; then
+    func_dirname_result="${3}"
+  else
+    func_dirname_result="$func_dirname_result${2}"
+  fi
+}
 
+# func_basename file
+func_basename ()
+{
+  func_basename_result=`$ECHO "X${1}" | $Xsed -e "$basename"`
+}
 
-eval set X "  :F $CONFIG_FILES      :C $CONFIG_COMMANDS"
-shift
-for ac_tag
-do
-  case $ac_tag in
-  :[FHLC]) ac_mode=$ac_tag; continue;;
-  esac
-  case $ac_mode$ac_tag in
-  :[FHL]*:*);;
-  :L* | :C*:*) { { $as_echo "$as_me:$LINENO: error: invalid tag $ac_tag" >&5
-$as_echo "$as_me: error: invalid tag $ac_tag" >&2;}
-   { (exit 1); exit 1; }; };;
-  :[FH]-) ac_tag=-:-;;
-  :[FH]*) ac_tag=$ac_tag:$ac_tag.in;;
+
+# func_stripname prefix suffix name
+# strip PREFIX and SUFFIX off of NAME.
+# PREFIX and SUFFIX must not contain globbing or regex special
+# characters, hashes, percent signs, but SUFFIX may contain a leading
+# dot (in which case that matches only a dot).
+# func_strip_suffix prefix name
+func_stripname ()
+{
+  case ${2} in
+    .*) func_stripname_result=`$ECHO "X${3}" \
+           | $Xsed -e "s%^${1}%%" -e "s%\\\\${2}\$%%"`;;
+    *)  func_stripname_result=`$ECHO "X${3}" \
+           | $Xsed -e "s%^${1}%%" -e "s%${2}\$%%"`;;
   esac
-  ac_save_IFS=$IFS
-  IFS=:
-  set x $ac_tag
-  IFS=$ac_save_IFS
-  shift
-  ac_file=$1
-  shift
+}
 
-  case $ac_mode in
-  :L) ac_source=$1;;
-  :[FH])
-    ac_file_inputs=
-    for ac_f
-    do
-      case $ac_f in
-      -) ac_f="$tmp/stdin";;
-      *) # Look for the file first in the build tree, then in the source tree
-	 # (if the path is not absolute).  The absolute path cannot be DOS-style,
-	 # because $ac_f cannot contain `:'.
-	 test -f "$ac_f" ||
-	   case $ac_f in
-	   [\\/$]*) false;;
-	   *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";;
-	   esac ||
-	   { { $as_echo "$as_me:$LINENO: error: cannot find input file: $ac_f" >&5
-$as_echo "$as_me: error: cannot find input file: $ac_f" >&2;}
-   { (exit 1); exit 1; }; };;
-      esac
-      case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac
-      ac_file_inputs="$ac_file_inputs '$ac_f'"
-    done
+# sed scripts:
+my_sed_long_opt='1s/^\(-[^=]*\)=.*/\1/;q'
+my_sed_long_arg='1s/^-[^=]*=//'
 
-    # Let's still pretend it is `configure' which instantiates (i.e., don't
-    # use $as_me), people would be surprised to read:
-    #    /* config.h.  Generated by config.status.  */
-    configure_input='Generated from '`
-	  $as_echo "$*" | sed 's|^[^:]*/||;s|:[^:]*/|, |g'
-	`' by configure.'
-    if test x"$ac_file" != x-; then
-      configure_input="$ac_file.  $configure_input"
-      { $as_echo "$as_me:$LINENO: creating $ac_file" >&5
-$as_echo "$as_me: creating $ac_file" >&6;}
-    fi
-    # Neutralize special characters interpreted by sed in replacement strings.
-    case $configure_input in #(
-    *\&* | *\|* | *\\* )
-       ac_sed_conf_input=`$as_echo "$configure_input" |
-       sed 's/[\\\\&|]/\\\\&/g'`;; #(
-    *) ac_sed_conf_input=$configure_input;;
-    esac
+# func_opt_split
+func_opt_split ()
+{
+  func_opt_split_opt=`$ECHO "X${1}" | $Xsed -e "$my_sed_long_opt"`
+  func_opt_split_arg=`$ECHO "X${1}" | $Xsed -e "$my_sed_long_arg"`
+}
 
-    case $ac_tag in
-    *:-:* | *:-) cat >"$tmp/stdin" \
-      || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5
-$as_echo "$as_me: error: could not create $ac_file" >&2;}
-   { (exit 1); exit 1; }; } ;;
-    esac
+# func_lo2o object
+func_lo2o ()
+{
+  func_lo2o_result=`$ECHO "X${1}" | $Xsed -e "$lo2o"`
+}
+
+# func_xform libobj-or-source
+func_xform ()
+{
+  func_xform_result=`$ECHO "X${1}" | $Xsed -e 's/\.[^.]*$/.lo/'`
+}
+
+# func_arith arithmetic-term...
+func_arith ()
+{
+  func_arith_result=`expr "$@"`
+}
+
+# func_len string
+# STRING may not start with a hyphen.
+func_len ()
+{
+  func_len_result=`expr "$1" : ".*" 2>/dev/null || echo $max_cmd_len`
+}
+
+_LT_EOF
+esac
+
+case $lt_shell_append in
+  yes)
+    cat << \_LT_EOF >> "$cfgfile"
+
+# func_append var value
+# Append VALUE to the end of shell variable VAR.
+func_append ()
+{
+  eval "$1+=\$2"
+}
+_LT_EOF
     ;;
-  esac
+  *)
+    cat << \_LT_EOF >> "$cfgfile"
 
-  ac_dir=`$as_dirname -- "$ac_file" ||
-$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-	 X"$ac_file" : 'X\(//\)[^/]' \| \
-	 X"$ac_file" : 'X\(//\)$' \| \
-	 X"$ac_file" : 'X\(/\)' \| . 2>/dev/null ||
-$as_echo X"$ac_file" |
-    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
-	    s//\1/
-	    q
-	  }
-	  /^X\(\/\/\)[^/].*/{
-	    s//\1/
-	    q
-	  }
-	  /^X\(\/\/\)$/{
-	    s//\1/
-	    q
-	  }
-	  /^X\(\/\).*/{
-	    s//\1/
-	    q
-	  }
-	  s/.*/./; q'`
-  { as_dir="$ac_dir"
-  case $as_dir in #(
-  -*) as_dir=./$as_dir;;
+# func_append var value
+# Append VALUE to the end of shell variable VAR.
+func_append ()
+{
+  eval "$1=\$$1\$2"
+}
+
+_LT_EOF
+    ;;
   esac
-  test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || {
-    as_dirs=
-    while :; do
-      case $as_dir in #(
-      *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
-      *) as_qdir=$as_dir;;
-      esac
-      as_dirs="'$as_qdir' $as_dirs"
-      as_dir=`$as_dirname -- "$as_dir" ||
-$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-	 X"$as_dir" : 'X\(//\)[^/]' \| \
-	 X"$as_dir" : 'X\(//\)$' \| \
-	 X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
-$as_echo X"$as_dir" |
-    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
-	    s//\1/
-	    q
-	  }
-	  /^X\(\/\/\)[^/].*/{
-	    s//\1/
-	    q
-	  }
-	  /^X\(\/\/\)$/{
-	    s//\1/
-	    q
-	  }
-	  /^X\(\/\).*/{
-	    s//\1/
-	    q
-	  }
-	  s/.*/./; q'`
-      test -d "$as_dir" && break
-    done
-    test -z "$as_dirs" || eval "mkdir $as_dirs"
-  } || test -d "$as_dir" || { { $as_echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5
-$as_echo "$as_me: error: cannot create directory $as_dir" >&2;}
-   { (exit 1); exit 1; }; }; }
-  ac_builddir=.
 
-case "$ac_dir" in
-.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
-*)
-  ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
-  # A ".." for each directory in $ac_dir_suffix.
-  ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
-  case $ac_top_builddir_sub in
-  "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
-  *)  ac_top_build_prefix=$ac_top_builddir_sub/ ;;
-  esac ;;
-esac
-ac_abs_top_builddir=$ac_pwd
-ac_abs_builddir=$ac_pwd$ac_dir_suffix
-# for backward compatibility:
-ac_top_builddir=$ac_top_build_prefix
 
-case $srcdir in
-  .)  # We are building in place.
-    ac_srcdir=.
-    ac_top_srcdir=$ac_top_builddir_sub
-    ac_abs_top_srcdir=$ac_pwd ;;
-  [\\/]* | ?:[\\/]* )  # Absolute name.
-    ac_srcdir=$srcdir$ac_dir_suffix;
-    ac_top_srcdir=$srcdir
-    ac_abs_top_srcdir=$srcdir ;;
-  *) # Relative name.
-    ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
-    ac_top_srcdir=$ac_top_build_prefix$srcdir
-    ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
-esac
-ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
+  sed -n '/^# Generated shell functions inserted here/,$p' "$ltmain" >> "$cfgfile" \
+    || (rm -f "$cfgfile"; exit 1)
+
+  mv -f "$cfgfile" "$ofile" ||
+    (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")
+  chmod +x "$ofile"
+
+
+    cat <<_LT_EOF >> "$ofile"
+
+# ### BEGIN LIBTOOL TAG CONFIG: CXX
+
+# The linker used to build libraries.
+LD=$lt_LD_CXX
+
+# Commands used to build an old-style archive.
+old_archive_cmds=$lt_old_archive_cmds_CXX
+
+# A language specific compiler.
+CC=$lt_compiler_CXX
+
+# Is the compiler the GNU compiler?
+with_gcc=$GCC_CXX
+
+# Compiler flag to turn off builtin functions.
+no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_CXX
+
+# How to pass a linker flag through the compiler.
+wl=$lt_lt_prog_compiler_wl_CXX
+
+# Additional compiler flags for building library objects.
+pic_flag=$lt_lt_prog_compiler_pic_CXX
+
+# Compiler flag to prevent dynamic linking.
+link_static_flag=$lt_lt_prog_compiler_static_CXX
+
+# Does compiler simultaneously support -c and -o options?
+compiler_c_o=$lt_lt_cv_prog_compiler_c_o_CXX
+
+# Whether or not to add -lc for building shared libraries.
+build_libtool_need_lc=$archive_cmds_need_lc_CXX
+
+# Whether or not to disallow shared libs when runtime libs are static.
+allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes_CXX
+
+# Compiler flag to allow reflexive dlopens.
+export_dynamic_flag_spec=$lt_export_dynamic_flag_spec_CXX
+
+# Compiler flag to generate shared objects directly from archives.
+whole_archive_flag_spec=$lt_whole_archive_flag_spec_CXX
+
+# Whether the compiler copes with passing no objects directly.
+compiler_needs_object=$lt_compiler_needs_object_CXX
+
+# Create an old-style archive from a shared archive.
+old_archive_from_new_cmds=$lt_old_archive_from_new_cmds_CXX
 
+# Create a temporary old-style archive to link instead of a shared archive.
+old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds_CXX
 
-  case $ac_mode in
-  :F)
-  #
-  # CONFIG_FILE
-  #
+# Commands used to build a shared archive.
+archive_cmds=$lt_archive_cmds_CXX
+archive_expsym_cmds=$lt_archive_expsym_cmds_CXX
 
-  case $INSTALL in
-  [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;;
-  *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;;
-  esac
-  ac_MKDIR_P=$MKDIR_P
-  case $MKDIR_P in
-  [\\/$]* | ?:[\\/]* ) ;;
-  */*) ac_MKDIR_P=$ac_top_build_prefix$MKDIR_P ;;
-  esac
-_ACEOF
+# Commands used to build a loadable module if different from building
+# a shared archive.
+module_cmds=$lt_module_cmds_CXX
+module_expsym_cmds=$lt_module_expsym_cmds_CXX
 
-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-# If the template does not know about datarootdir, expand it.
-# FIXME: This hack should be removed a few years after 2.60.
-ac_datarootdir_hack=; ac_datarootdir_seen=
+# Whether we are building with GNU ld or not.
+with_gnu_ld=$lt_with_gnu_ld_CXX
 
-ac_sed_dataroot='
-/datarootdir/ {
-  p
-  q
-}
-/@datadir@/p
-/@docdir@/p
-/@infodir@/p
-/@localedir@/p
-/@mandir@/p
-'
-case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in
-*datarootdir*) ac_datarootdir_seen=yes;;
-*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*)
-  { $as_echo "$as_me:$LINENO: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5
-$as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;}
-_ACEOF
-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
-  ac_datarootdir_hack='
-  s&@datadir@&$datadir&g
-  s&@docdir@&$docdir&g
-  s&@infodir@&$infodir&g
-  s&@localedir@&$localedir&g
-  s&@mandir@&$mandir&g
-    s&\\\${datarootdir}&$datarootdir&g' ;;
-esac
-_ACEOF
+# Flag that allows shared libraries with undefined symbols to be built.
+allow_undefined_flag=$lt_allow_undefined_flag_CXX
 
-# Neutralize VPATH when `$srcdir' = `.'.
-# Shell code in configure.ac might set extrasub.
-# FIXME: do we really want to maintain this feature?
-cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
-ac_sed_extra="$ac_vpsub
-$extrasub
-_ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
-:t
-/@[a-zA-Z_][a-zA-Z_0-9]*@/!b
-s|@configure_input@|$ac_sed_conf_input|;t t
-s&@top_builddir@&$ac_top_builddir_sub&;t t
-s&@top_build_prefix@&$ac_top_build_prefix&;t t
-s&@srcdir@&$ac_srcdir&;t t
-s&@abs_srcdir@&$ac_abs_srcdir&;t t
-s&@top_srcdir@&$ac_top_srcdir&;t t
-s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t
-s&@builddir@&$ac_builddir&;t t
-s&@abs_builddir@&$ac_abs_builddir&;t t
-s&@abs_top_builddir@&$ac_abs_top_builddir&;t t
-s&@INSTALL@&$ac_INSTALL&;t t
-s&@MKDIR_P@&$ac_MKDIR_P&;t t
-$ac_datarootdir_hack
-"
-eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$tmp/subs.awk" >$tmp/out \
-  || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5
-$as_echo "$as_me: error: could not create $ac_file" >&2;}
-   { (exit 1); exit 1; }; }
+# Flag that enforces no undefined symbols.
+no_undefined_flag=$lt_no_undefined_flag_CXX
 
-test -z "$ac_datarootdir_hack$ac_datarootdir_seen" &&
-  { ac_out=`sed -n '/\${datarootdir}/p' "$tmp/out"`; test -n "$ac_out"; } &&
-  { ac_out=`sed -n '/^[	 ]*datarootdir[	 ]*:*=/p' "$tmp/out"`; test -z "$ac_out"; } &&
-  { $as_echo "$as_me:$LINENO: WARNING: $ac_file contains a reference to the variable \`datarootdir'
-which seems to be undefined.  Please make sure it is defined." >&5
-$as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir'
-which seems to be undefined.  Please make sure it is defined." >&2;}
+# Flag to hardcode \$libdir into a binary during linking.
+# This must work even if \$libdir does not exist
+hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_CXX
 
-  rm -f "$tmp/stdin"
-  case $ac_file in
-  -) cat "$tmp/out" && rm -f "$tmp/out";;
-  *) rm -f "$ac_file" && mv "$tmp/out" "$ac_file";;
-  esac \
-  || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5
-$as_echo "$as_me: error: could not create $ac_file" >&2;}
-   { (exit 1); exit 1; }; }
- ;;
+# If ld is used when linking, flag to hardcode \$libdir into a binary
+# during linking.  This must work even if \$libdir does not exist.
+hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_CXX
 
+# Whether we need a single "-rpath" flag with a separated argument.
+hardcode_libdir_separator=$lt_hardcode_libdir_separator_CXX
 
-  :C)  { $as_echo "$as_me:$LINENO: executing $ac_file commands" >&5
-$as_echo "$as_me: executing $ac_file commands" >&6;}
- ;;
-  esac
+# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes
+# DIR into the resulting binary.
+hardcode_direct=$hardcode_direct_CXX
 
+# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes
+# DIR into the resulting binary and the resulting library dependency is
+# "absolute",i.e impossible to change by setting \${shlibpath_var} if the
+# library is relocated.
+hardcode_direct_absolute=$hardcode_direct_absolute_CXX
+
+# Set to "yes" if using the -LDIR flag during linking hardcodes DIR
+# into the resulting binary.
+hardcode_minus_L=$hardcode_minus_L_CXX
+
+# Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR
+# into the resulting binary.
+hardcode_shlibpath_var=$hardcode_shlibpath_var_CXX
+
+# Set to "yes" if building a shared library automatically hardcodes DIR
+# into the library and all subsequent libraries and executables linked
+# against it.
+hardcode_automatic=$hardcode_automatic_CXX
+
+# Set to yes if linker adds runtime paths of dependent libraries
+# to runtime path list.
+inherit_rpath=$inherit_rpath_CXX
+
+# Whether libtool must link a program against all its dependency libraries.
+link_all_deplibs=$link_all_deplibs_CXX
+
+# Fix the shell variable \$srcfile for the compiler.
+fix_srcfile_path=$lt_fix_srcfile_path_CXX
+
+# Set to "yes" if exported symbols are required.
+always_export_symbols=$always_export_symbols_CXX
+
+# The commands to list exported symbols.
+export_symbols_cmds=$lt_export_symbols_cmds_CXX
+
+# Symbols that should not be listed in the preloaded symbols.
+exclude_expsyms=$lt_exclude_expsyms_CXX
+
+# Symbols that must always be exported.
+include_expsyms=$lt_include_expsyms_CXX
+
+# Commands necessary for linking programs (against libraries) with templates.
+prelink_cmds=$lt_prelink_cmds_CXX
+
+# Specify filename containing input files.
+file_list_spec=$lt_file_list_spec_CXX
+
+# How to hardcode a shared library path into an executable.
+hardcode_action=$hardcode_action_CXX
+
+# The directories searched by this compiler when creating a shared library.
+compiler_lib_search_dirs=$lt_compiler_lib_search_dirs_CXX
+
+# Dependencies to place before and after the objects being linked to
+# create a shared library.
+predep_objects=$lt_predep_objects_CXX
+postdep_objects=$lt_postdep_objects_CXX
+predeps=$lt_predeps_CXX
+postdeps=$lt_postdeps_CXX
+
+# The library search path used internally by the compiler when linking
+# a shared library.
+compiler_lib_search_path=$lt_compiler_lib_search_path_CXX
+
+# ### END LIBTOOL TAG CONFIG: CXX
+_LT_EOF
 
-  case $ac_file$ac_mode in
-    "depfiles":C) test x"$AMDEP_TRUE" != x"" || for mf in $CONFIG_FILES; do
-  # Strip MF so we end up with the name of the file.
-  mf=`echo "$mf" | sed -e 's/:.*$//'`
-  # Check whether this is an Automake generated Makefile or not.
-  # We used to match only the files named `Makefile.in', but
-  # some people rename them; so instead we look at the file content.
-  # Grep'ing the first line is not enough: some people post-process
-  # each Makefile.in and add a new line on top of each file to say so.
-  # Grep'ing the whole file is not good either: AIX grep has a line
-  # limit of 2048, but all sed's we know have understand at least 4000.
-  if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then
-    dirpart=`$as_dirname -- "$mf" ||
-$as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-	 X"$mf" : 'X\(//\)[^/]' \| \
-	 X"$mf" : 'X\(//\)$' \| \
-	 X"$mf" : 'X\(/\)' \| . 2>/dev/null ||
-$as_echo X"$mf" |
-    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
-	    s//\1/
-	    q
-	  }
-	  /^X\(\/\/\)[^/].*/{
-	    s//\1/
-	    q
-	  }
-	  /^X\(\/\/\)$/{
-	    s//\1/
-	    q
-	  }
-	  /^X\(\/\).*/{
-	    s//\1/
-	    q
-	  }
-	  s/.*/./; q'`
-  else
-    continue
-  fi
-  # Extract the definition of DEPDIR, am__include, and am__quote
-  # from the Makefile without running `make'.
-  DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
-  test -z "$DEPDIR" && continue
-  am__include=`sed -n 's/^am__include = //p' < "$mf"`
-  test -z "am__include" && continue
-  am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
-  # When using ansi2knr, U may be empty or an underscore; expand it
-  U=`sed -n 's/^U = //p' < "$mf"`
-  # Find all dependency output files, they are included files with
-  # $(DEPDIR) in their names.  We invoke sed twice because it is the
-  # simplest approach to changing $(DEPDIR) to its actual value in the
-  # expansion.
-  for file in `sed -n "
-    s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
-       sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
-    # Make sure the directory exists.
-    test -f "$dirpart/$file" && continue
-    fdir=`$as_dirname -- "$file" ||
-$as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-	 X"$file" : 'X\(//\)[^/]' \| \
-	 X"$file" : 'X\(//\)$' \| \
-	 X"$file" : 'X\(/\)' \| . 2>/dev/null ||
-$as_echo X"$file" |
-    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
-	    s//\1/
-	    q
-	  }
-	  /^X\(\/\/\)[^/].*/{
-	    s//\1/
-	    q
-	  }
-	  /^X\(\/\/\)$/{
-	    s//\1/
-	    q
-	  }
-	  /^X\(\/\).*/{
-	    s//\1/
-	    q
-	  }
-	  s/.*/./; q'`
-    { as_dir=$dirpart/$fdir
-  case $as_dir in #(
-  -*) as_dir=./$as_dir;;
-  esac
-  test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || {
-    as_dirs=
-    while :; do
-      case $as_dir in #(
-      *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
-      *) as_qdir=$as_dir;;
-      esac
-      as_dirs="'$as_qdir' $as_dirs"
-      as_dir=`$as_dirname -- "$as_dir" ||
-$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-	 X"$as_dir" : 'X\(//\)[^/]' \| \
-	 X"$as_dir" : 'X\(//\)$' \| \
-	 X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
-$as_echo X"$as_dir" |
-    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
-	    s//\1/
-	    q
-	  }
-	  /^X\(\/\/\)[^/].*/{
-	    s//\1/
-	    q
-	  }
-	  /^X\(\/\/\)$/{
-	    s//\1/
-	    q
-	  }
-	  /^X\(\/\).*/{
-	    s//\1/
-	    q
-	  }
-	  s/.*/./; q'`
-      test -d "$as_dir" && break
-    done
-    test -z "$as_dirs" || eval "mkdir $as_dirs"
-  } || test -d "$as_dir" || { { $as_echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5
-$as_echo "$as_me: error: cannot create directory $as_dir" >&2;}
-   { (exit 1); exit 1; }; }; }
-    # echo "creating $dirpart/$file"
-    echo '# dummy' > "$dirpart/$file"
-  done
-done
  ;;
 
   esac
 done # for ac_tag
 
 
-{ (exit 0); exit 0; }
+as_fn_exit 0
 _ACEOF
-chmod +x $CONFIG_STATUS
 ac_clean_files=$ac_clean_files_save
 
 test $ac_write_fail = 0 ||
-  { { $as_echo "$as_me:$LINENO: error: write failure creating $CONFIG_STATUS" >&5
-$as_echo "$as_me: error: write failure creating $CONFIG_STATUS" >&2;}
-   { (exit 1); exit 1; }; }
+  as_fn_error "write failure creating $CONFIG_STATUS" "$LINENO" 5
 
 
 # configure is writing to config.log, and then calls config.status.
@@ -25852,10 +18928,10 @@
   exec 5>>config.log
   # Use ||, not &&, to avoid exiting from the if with $? = 1, which
   # would make configure fail if this is the last instruction.
-  $ac_cs_success || { (exit 1); exit 1; }
+  $ac_cs_success || as_fn_exit $?
 fi
 if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then
-  { $as_echo "$as_me:$LINENO: WARNING: unrecognized options: $ac_unrecognized_opts" >&5
+  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: unrecognized options: $ac_unrecognized_opts" >&5
 $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2;}
 fi
 
--- ode-0.11.orig/ou/Makefile.in
+++ ode-0.11/ou/Makefile.in
@@ -1,8 +1,9 @@
-# Makefile.in generated by automake 1.10.1 from Makefile.am.
+# Makefile.in generated by automake 1.11 from Makefile.am.
 # @configure_input@
 
 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
+# Inc.
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -15,8 +16,9 @@
 @SET_MAKE@
 VPATH = @srcdir@
 pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
 install_sh_DATA = $(install_sh) -c -m 644
 install_sh_PROGRAM = $(install_sh) -c
@@ -45,6 +47,7 @@
  configure.lineno config.status.lineno
 mkinstalldirs = $(install_sh) -d
 CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
 SOURCES =
 DIST_SOURCES =
 RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
@@ -56,6 +59,9 @@
 	ps-recursive uninstall-recursive
 RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
   distclean-recursive maintainer-clean-recursive
+AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
+	$(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
+	distdir dist dist-all distcheck
 ETAGS = etags
 CTAGS = ctags
 DIST_SUBDIRS = $(SUBDIRS)
@@ -63,9 +69,34 @@
 distdir = $(PACKAGE)-$(VERSION)
 top_distdir = $(distdir)
 am__remove_distdir = \
-  { test ! -d $(distdir) \
-    || { find $(distdir) -type d ! -perm -200 -exec chmod u+w {} ';' \
-         && rm -fr $(distdir); }; }
+  { test ! -d "$(distdir)" \
+    || { find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
+         && rm -fr "$(distdir)"; }; }
+am__relativize = \
+  dir0=`pwd`; \
+  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
+  sed_rest='s,^[^/]*/*,,'; \
+  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
+  sed_butlast='s,/*[^/]*$$,,'; \
+  while test -n "$$dir1"; do \
+    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
+    if test "$$first" != "."; then \
+      if test "$$first" = ".."; then \
+        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
+        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
+      else \
+        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
+        if test "$$first2" = "$$first"; then \
+          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
+        else \
+          dir2="../$$dir2"; \
+        fi; \
+        dir0="$$dir0"/"$$first"; \
+      fi; \
+    fi; \
+    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
+  done; \
+  reldir="$$dir2"
 DIST_ARCHIVES = $(distdir).tar.gz
 GZIP_ENV = --best
 distuninstallcheck_listfiles = find . -type f -print
@@ -92,37 +123,42 @@
 DEPDIR = @DEPDIR@
 DLLTOOL = @DLLTOOL@
 DSYMUTIL = @DSYMUTIL@
-ECHO = @ECHO@
+DUMPBIN = @DUMPBIN@
 ECHO_C = @ECHO_C@
 ECHO_N = @ECHO_N@
 ECHO_T = @ECHO_T@
 EGREP = @EGREP@
 EXEEXT = @EXEEXT@
-F77 = @F77@
-FFLAGS = @FFLAGS@
+FGREP = @FGREP@
 GREP = @GREP@
 INSTALL = @INSTALL@
 INSTALL_DATA = @INSTALL_DATA@
 INSTALL_PROGRAM = @INSTALL_PROGRAM@
 INSTALL_SCRIPT = @INSTALL_SCRIPT@
 INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LD = @LD@
 LDFLAGS = @LDFLAGS@
 LIBOBJS = @LIBOBJS@
 LIBS = @LIBS@
 LIBTOOL = @LIBTOOL@
+LIPO = @LIPO@
 LN_S = @LN_S@
 LTLIBOBJS = @LTLIBOBJS@
 MAKEINFO = @MAKEINFO@
 MKDIR_P = @MKDIR_P@
+NM = @NM@
 NMEDIT = @NMEDIT@
 OBJDUMP = @OBJDUMP@
 OBJEXT = @OBJEXT@
+OTOOL = @OTOOL@
+OTOOL64 = @OTOOL64@
 OU_NAMESPACE = @OU_NAMESPACE@
 PACKAGE = @PACKAGE@
 PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
 PACKAGE_NAME = @PACKAGE_NAME@
 PACKAGE_STRING = @PACKAGE_STRING@
 PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
 PACKAGE_VERSION = @PACKAGE_VERSION@
 PATH_SEPARATOR = @PATH_SEPARATOR@
 RANLIB = @RANLIB@
@@ -137,7 +173,7 @@
 abs_top_srcdir = @abs_top_srcdir@
 ac_ct_CC = @ac_ct_CC@
 ac_ct_CXX = @ac_ct_CXX@
-ac_ct_F77 = @ac_ct_F77@
+ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
 am__include = @am__include@
 am__leading_dot = @am__leading_dot@
 am__quote = @am__quote@
@@ -168,6 +204,7 @@
 libexecdir = @libexecdir@
 localedir = @localedir@
 localstatedir = @localstatedir@
+lt_ECHO = @lt_ECHO@
 mandir = @mandir@
 mkdir_p = @mkdir_p@
 oldincludedir = @oldincludedir@
@@ -200,15 +237,15 @@
 	@for dep in $?; do \
 	  case '$(am__configure_deps)' in \
 	    *$$dep*) \
-	      echo ' cd $(srcdir) && $(AUTOMAKE) --foreign '; \
-	      cd $(srcdir) && $(AUTOMAKE) --foreign  \
+	      echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \
+	      $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \
 		&& exit 0; \
 	      exit 1;; \
 	  esac; \
 	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign  Makefile'; \
-	cd $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign  Makefile
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign Makefile
 .PRECIOUS: Makefile
 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 	@case '$?' in \
@@ -224,9 +261,10 @@
 	$(SHELL) ./config.status --recheck
 
 $(top_srcdir)/configure:  $(am__configure_deps)
-	cd $(srcdir) && $(AUTOCONF)
+	$(am__cd) $(srcdir) && $(AUTOCONF)
 $(ACLOCAL_M4):  $(am__aclocal_m4_deps)
-	cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
+	$(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
+$(am__aclocal_m4_deps):
 
 mostlyclean-libtool:
 	-rm -f *.lo
@@ -235,7 +273,7 @@
 	-rm -rf .libs _libs
 
 distclean-libtool:
-	-rm -f libtool
+	-rm -f libtool config.lt
 
 # This directory's subdirectories are mostly independent; you can cd
 # into them and run `make' without going through this Makefile.
@@ -261,7 +299,7 @@
 	  else \
 	    local_target="$$target"; \
 	  fi; \
-	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
 	  || eval $$failcom; \
 	done; \
 	if test "$$dot_seen" = "no"; then \
@@ -295,16 +333,16 @@
 	  else \
 	    local_target="$$target"; \
 	  fi; \
-	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
 	  || eval $$failcom; \
 	done && test -z "$$fail"
 tags-recursive:
 	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
+	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
 	done
 ctags-recursive:
 	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
+	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
 	done
 
 ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
@@ -312,14 +350,14 @@
 	unique=`for i in $$list; do \
 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 	  done | \
-	  $(AWK) '{ files[$$0] = 1; nonemtpy = 1; } \
+	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
 	mkid -fID $$unique
 tags: TAGS
 
 TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
+	set x; \
 	here=`pwd`; \
 	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
 	  include_option=--etags-include; \
@@ -331,7 +369,7 @@
 	list='$(SUBDIRS)'; for subdir in $$list; do \
 	  if test "$$subdir" = .; then :; else \
 	    test ! -f $$subdir/TAGS || \
-	      tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
+	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
 	  fi; \
 	done; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
@@ -340,36 +378,41 @@
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
 	  test -n "$$unique" || unique=$$empty_fix; \
-	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	    $$tags $$unique; \
+	  if test $$# -gt 0; then \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
 	fi
 ctags: CTAGS
 CTAGS: ctags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	test -z "$(CTAGS_ARGS)$$tags$$unique" \
+	test -z "$(CTAGS_ARGS)$$unique" \
 	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
-	     $$tags $$unique
+	     $$unique
 
 GTAGS:
 	here=`$(am__cd) $(top_builddir) && pwd` \
-	  && cd $(top_srcdir) \
-	  && gtags -i $(GTAGS_ARGS) $$here
+	  && $(am__cd) $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) "$$here"
 
 distclean-tags:
 	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
 
 distdir: $(DISTFILES)
 	$(am__remove_distdir)
-	test -d $(distdir) || mkdir $(distdir)
+	test -d "$(distdir)" || mkdir "$(distdir)"
 	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
 	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
 	list='$(DISTFILES)'; \
@@ -385,38 +428,54 @@
 	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
 	  if test -d $$d/$$file; then \
 	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
 	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 	    fi; \
-	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
 	  else \
-	    test -f $(distdir)/$$file \
-	    || cp -p $$d/$$file $(distdir)/$$file \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
 	    || exit 1; \
 	  fi; \
 	done
-	list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
 	  if test "$$subdir" = .; then :; else \
 	    test -d "$(distdir)/$$subdir" \
 	    || $(MKDIR_P) "$(distdir)/$$subdir" \
 	    || exit 1; \
-	    distdir=`$(am__cd) $(distdir) && pwd`; \
-	    top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
-	    (cd $$subdir && \
+	  fi; \
+	done
+	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+	  if test "$$subdir" = .; then :; else \
+	    dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
+	    $(am__relativize); \
+	    new_distdir=$$reldir; \
+	    dir1=$$subdir; dir2="$(top_distdir)"; \
+	    $(am__relativize); \
+	    new_top_distdir=$$reldir; \
+	    echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
+	    echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
+	    ($(am__cd) $$subdir && \
 	      $(MAKE) $(AM_MAKEFLAGS) \
-	        top_distdir="$$top_distdir" \
-	        distdir="$$distdir/$$subdir" \
+	        top_distdir="$$new_top_distdir" \
+	        distdir="$$new_distdir" \
 		am__remove_distdir=: \
 		am__skip_length_check=: \
+		am__skip_mode_fix=: \
 	        distdir) \
 	      || exit 1; \
 	  fi; \
 	done
-	-find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \
+	-test -n "$(am__skip_mode_fix)" \
+	|| find "$(distdir)" -type d ! -perm -777 -exec chmod a+rwx {} \; -o \
 	  ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
 	  ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
 	  ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
-	|| chmod -R a+r $(distdir)
+	|| chmod -R a+r "$(distdir)"
 dist-gzip: distdir
 	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
 	$(am__remove_distdir)
@@ -429,6 +488,10 @@
 	tardir=$(distdir) && $(am__tar) | lzma -9 -c >$(distdir).tar.lzma
 	$(am__remove_distdir)
 
+dist-xz: distdir
+	tardir=$(distdir) && $(am__tar) | xz -c >$(distdir).tar.xz
+	$(am__remove_distdir)
+
 dist-tarZ: distdir
 	tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
 	$(am__remove_distdir)
@@ -457,6 +520,8 @@
 	  bunzip2 -c $(distdir).tar.bz2 | $(am__untar) ;;\
 	*.tar.lzma*) \
 	  unlzma -c $(distdir).tar.lzma | $(am__untar) ;;\
+	*.tar.xz*) \
+	  xz -dc $(distdir).tar.xz | $(am__untar) ;;\
 	*.tar.Z*) \
 	  uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
 	*.shar.gz*) \
@@ -468,9 +533,11 @@
 	mkdir $(distdir)/_build
 	mkdir $(distdir)/_inst
 	chmod a-w $(distdir)
+	test -d $(distdir)/_build || exit 0; \
 	dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
 	  && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
-	  && cd $(distdir)/_build \
+	  && am__cwd=`pwd` \
+	  && $(am__cd) $(distdir)/_build \
 	  && ../configure --srcdir=.. --prefix="$$dc_install_base" \
 	    $(DISTCHECK_CONFIGURE_FLAGS) \
 	  && $(MAKE) $(AM_MAKEFLAGS) \
@@ -492,13 +559,15 @@
 	  && rm -rf "$$dc_destdir" \
 	  && $(MAKE) $(AM_MAKEFLAGS) dist \
 	  && rm -rf $(DIST_ARCHIVES) \
-	  && $(MAKE) $(AM_MAKEFLAGS) distcleancheck
+	  && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
+	  && cd "$$am__cwd" \
+	  || exit 1
 	$(am__remove_distdir)
 	@(echo "$(distdir) archives ready for distribution: "; \
 	  list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
 	  sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
 distuninstallcheck:
-	@cd $(distuninstallcheck_dir) \
+	@$(am__cd) '$(distuninstallcheck_dir)' \
 	&& test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \
 	   || { echo "ERROR: files left after uninstall:" ; \
 	        if test -n "$(DESTDIR)"; then \
@@ -540,6 +609,7 @@
 
 distclean-generic:
 	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
 
 maintainer-clean-generic:
 	@echo "This command is intended for maintainers to use"
@@ -560,6 +630,8 @@
 
 html: html-recursive
 
+html-am:
+
 info: info-recursive
 
 info-am:
@@ -568,18 +640,28 @@
 
 install-dvi: install-dvi-recursive
 
+install-dvi-am:
+
 install-exec-am:
 
 install-html: install-html-recursive
 
+install-html-am:
+
 install-info: install-info-recursive
 
+install-info-am:
+
 install-man:
 
 install-pdf: install-pdf-recursive
 
+install-pdf-am:
+
 install-ps: install-ps-recursive
 
+install-ps-am:
+
 installcheck-am:
 
 maintainer-clean: maintainer-clean-recursive
@@ -602,24 +684,25 @@
 
 uninstall-am:
 
-.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) install-am \
-	install-strip
+.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) ctags-recursive \
+	install-am install-strip tags-recursive
 
 .PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
 	all all-am am--refresh check check-am clean clean-generic \
 	clean-libtool ctags ctags-recursive dist dist-all dist-bzip2 \
-	dist-gzip dist-lzma dist-shar dist-tarZ dist-zip distcheck \
-	distclean distclean-generic distclean-libtool distclean-tags \
-	distcleancheck distdir distuninstallcheck dvi dvi-am html \
-	html-am info info-am install install-am install-data \
-	install-data-am install-dvi install-dvi-am install-exec \
-	install-exec-am install-html install-html-am install-info \
-	install-info-am install-man install-pdf install-pdf-am \
-	install-ps install-ps-am install-strip installcheck \
-	installcheck-am installdirs installdirs-am maintainer-clean \
-	maintainer-clean-generic mostlyclean mostlyclean-generic \
-	mostlyclean-libtool pdf pdf-am ps ps-am tags tags-recursive \
-	uninstall uninstall-am
+	dist-gzip dist-lzma dist-shar dist-tarZ dist-xz dist-zip \
+	distcheck distclean distclean-generic distclean-libtool \
+	distclean-tags distcleancheck distdir distuninstallcheck dvi \
+	dvi-am html html-am info info-am install install-am \
+	install-data install-data-am install-dvi install-dvi-am \
+	install-exec install-exec-am install-html install-html-am \
+	install-info install-info-am install-man install-pdf \
+	install-pdf-am install-ps install-ps-am install-strip \
+	installcheck installcheck-am installdirs installdirs-am \
+	maintainer-clean maintainer-clean-generic mostlyclean \
+	mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
+	tags tags-recursive uninstall uninstall-am
+
 
 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 # Otherwise a system limit (for SysV at least) may be exceeded.
--- ode-0.11.orig/ou/aclocal.m4
+++ ode-0.11/ou/aclocal.m4
@@ -1,7 +1,7 @@
-# generated automatically by aclocal 1.10.1 -*- Autoconf -*-
+# generated automatically by aclocal 1.11 -*- Autoconf -*-
 
 # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
-# 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
+# 2005, 2006, 2007, 2008, 2009  Free Software Foundation, Inc.
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -13,108 +13,194 @@
 
 m4_ifndef([AC_AUTOCONF_VERSION],
   [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
-m4_if(AC_AUTOCONF_VERSION, [2.63],,
-[m4_warning([this file was generated for autoconf 2.63.
+m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.64],,
+[m4_warning([this file was generated for autoconf 2.64.
 You have another version of autoconf.  It may work, but is not guaranteed to.
 If you have problems, you may need to regenerate the build system entirely.
 To do so, use the procedure documented by the package, typically `autoreconf'.])])
 
 # libtool.m4 - Configure libtool for the host system. -*-Autoconf-*-
+#
+#   Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,
+#                 2006, 2007, 2008 Free Software Foundation, Inc.
+#   Written by Gordon Matzigkeit, 1996
+#
+# This file is free software; the Free Software Foundation gives
+# unlimited permission to copy and/or distribute it, with or without
+# modifications, as long as this notice is preserved.
+
+m4_define([_LT_COPYING], [dnl
+#   Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,
+#                 2006, 2007, 2008 Free Software Foundation, Inc.
+#   Written by Gordon Matzigkeit, 1996
+#
+#   This file is part of GNU Libtool.
+#
+# GNU Libtool is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# As a special exception to the GNU General Public License,
+# if you distribute this file as part of a program or library that
+# is built using GNU Libtool, you may include this file under the
+# same distribution terms that you use for the rest of that program.
+#
+# GNU Libtool is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING.  If not, a copy
+# can be downloaded from http://www.gnu.org/licenses/gpl.html, or
+# obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+])
 
-# serial 52 AC_PROG_LIBTOOL
+# serial 56 LT_INIT
 
 
-# AC_PROVIDE_IFELSE(MACRO-NAME, IF-PROVIDED, IF-NOT-PROVIDED)
-# -----------------------------------------------------------
-# If this macro is not defined by Autoconf, define it here.
-m4_ifdef([AC_PROVIDE_IFELSE],
-         [],
-         [m4_define([AC_PROVIDE_IFELSE],
-	         [m4_ifdef([AC_PROVIDE_$1],
-		           [$2], [$3])])])
+# LT_PREREQ(VERSION)
+# ------------------
+# Complain and exit if this libtool version is less that VERSION.
+m4_defun([LT_PREREQ],
+[m4_if(m4_version_compare(m4_defn([LT_PACKAGE_VERSION]), [$1]), -1,
+       [m4_default([$3],
+		   [m4_fatal([Libtool version $1 or higher is required],
+		             63)])],
+       [$2])])
 
 
-# AC_PROG_LIBTOOL
-# ---------------
-AC_DEFUN([AC_PROG_LIBTOOL],
-[AC_REQUIRE([_AC_PROG_LIBTOOL])dnl
-dnl If AC_PROG_CXX has already been expanded, run AC_LIBTOOL_CXX
-dnl immediately, otherwise, hook it in at the end of AC_PROG_CXX.
-  AC_PROVIDE_IFELSE([AC_PROG_CXX],
-    [AC_LIBTOOL_CXX],
-    [define([AC_PROG_CXX], defn([AC_PROG_CXX])[AC_LIBTOOL_CXX
-  ])])
-dnl And a similar setup for Fortran 77 support
-  AC_PROVIDE_IFELSE([AC_PROG_F77],
-    [AC_LIBTOOL_F77],
-    [define([AC_PROG_F77], defn([AC_PROG_F77])[AC_LIBTOOL_F77
-])])
-
-dnl Quote A][M_PROG_GCJ so that aclocal doesn't bring it in needlessly.
-dnl If either AC_PROG_GCJ or A][M_PROG_GCJ have already been expanded, run
-dnl AC_LIBTOOL_GCJ immediately, otherwise, hook it in at the end of both.
-  AC_PROVIDE_IFELSE([AC_PROG_GCJ],
-    [AC_LIBTOOL_GCJ],
-    [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],
-      [AC_LIBTOOL_GCJ],
-      [AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ],
-	[AC_LIBTOOL_GCJ],
-      [ifdef([AC_PROG_GCJ],
-	     [define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[AC_LIBTOOL_GCJ])])
-       ifdef([A][M_PROG_GCJ],
-	     [define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[AC_LIBTOOL_GCJ])])
-       ifdef([LT_AC_PROG_GCJ],
-	     [define([LT_AC_PROG_GCJ],
-		defn([LT_AC_PROG_GCJ])[AC_LIBTOOL_GCJ])])])])
-])])# AC_PROG_LIBTOOL
+# _LT_CHECK_BUILDDIR
+# ------------------
+# Complain if the absolute build directory name contains unusual characters
+m4_defun([_LT_CHECK_BUILDDIR],
+[case `pwd` in
+  *\ * | *\	*)
+    AC_MSG_WARN([Libtool does not cope well with whitespace in `pwd`]) ;;
+esac
+])
 
 
-# _AC_PROG_LIBTOOL
-# ----------------
-AC_DEFUN([_AC_PROG_LIBTOOL],
-[AC_REQUIRE([AC_LIBTOOL_SETUP])dnl
-AC_BEFORE([$0],[AC_LIBTOOL_CXX])dnl
-AC_BEFORE([$0],[AC_LIBTOOL_F77])dnl
-AC_BEFORE([$0],[AC_LIBTOOL_GCJ])dnl
+# LT_INIT([OPTIONS])
+# ------------------
+AC_DEFUN([LT_INIT],
+[AC_PREREQ([2.58])dnl We use AC_INCLUDES_DEFAULT
+AC_BEFORE([$0], [LT_LANG])dnl
+AC_BEFORE([$0], [LT_OUTPUT])dnl
+AC_BEFORE([$0], [LTDL_INIT])dnl
+m4_require([_LT_CHECK_BUILDDIR])dnl
+
+dnl Autoconf doesn't catch unexpanded LT_ macros by default:
+m4_pattern_forbid([^_?LT_[A-Z_]+$])dnl
+m4_pattern_allow([^(_LT_EOF|LT_DLGLOBAL|LT_DLLAZY_OR_NOW|LT_MULTI_MODULE)$])dnl
+dnl aclocal doesn't pull ltoptions.m4, ltsugar.m4, or ltversion.m4
+dnl unless we require an AC_DEFUNed macro:
+AC_REQUIRE([LTOPTIONS_VERSION])dnl
+AC_REQUIRE([LTSUGAR_VERSION])dnl
+AC_REQUIRE([LTVERSION_VERSION])dnl
+AC_REQUIRE([LTOBSOLETE_VERSION])dnl
+m4_require([_LT_PROG_LTMAIN])dnl
+
+dnl Parse OPTIONS
+_LT_SET_OPTIONS([$0], [$1])
 
 # This can be used to rebuild libtool when needed
-LIBTOOL_DEPS="$ac_aux_dir/ltmain.sh"
+LIBTOOL_DEPS="$ltmain"
 
 # Always use our own libtool.
 LIBTOOL='$(SHELL) $(top_builddir)/libtool'
 AC_SUBST(LIBTOOL)dnl
 
-# Prevent multiple expansion
-define([AC_PROG_LIBTOOL], [])
-])# _AC_PROG_LIBTOOL
+_LT_SETUP
 
+# Only expand once:
+m4_define([LT_INIT])
+])# LT_INIT
+
+# Old names:
+AU_ALIAS([AC_PROG_LIBTOOL], [LT_INIT])
+AU_ALIAS([AM_PROG_LIBTOOL], [LT_INIT])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_PROG_LIBTOOL], [])
+dnl AC_DEFUN([AM_PROG_LIBTOOL], [])
 
-# AC_LIBTOOL_SETUP
-# ----------------
-AC_DEFUN([AC_LIBTOOL_SETUP],
-[AC_PREREQ(2.50)dnl
-AC_REQUIRE([AC_ENABLE_SHARED])dnl
-AC_REQUIRE([AC_ENABLE_STATIC])dnl
-AC_REQUIRE([AC_ENABLE_FAST_INSTALL])dnl
-AC_REQUIRE([AC_CANONICAL_HOST])dnl
+
+# _LT_CC_BASENAME(CC)
+# -------------------
+# Calculate cc_basename.  Skip known compiler wrappers and cross-prefix.
+m4_defun([_LT_CC_BASENAME],
+[for cc_temp in $1""; do
+  case $cc_temp in
+    compile | *[[\\/]]compile | ccache | *[[\\/]]ccache ) ;;
+    distcc | *[[\\/]]distcc | purify | *[[\\/]]purify ) ;;
+    \-*) ;;
+    *) break;;
+  esac
+done
+cc_basename=`$ECHO "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
+])
+
+
+# _LT_FILEUTILS_DEFAULTS
+# ----------------------
+# It is okay to use these file commands and assume they have been set
+# sensibly after `m4_require([_LT_FILEUTILS_DEFAULTS])'.
+m4_defun([_LT_FILEUTILS_DEFAULTS],
+[: ${CP="cp -f"}
+: ${MV="mv -f"}
+: ${RM="rm -f"}
+])# _LT_FILEUTILS_DEFAULTS
+
+
+# _LT_SETUP
+# ---------
+m4_defun([_LT_SETUP],
+[AC_REQUIRE([AC_CANONICAL_HOST])dnl
 AC_REQUIRE([AC_CANONICAL_BUILD])dnl
+_LT_DECL([], [host_alias], [0], [The host system])dnl
+_LT_DECL([], [host], [0])dnl
+_LT_DECL([], [host_os], [0])dnl
+dnl
+_LT_DECL([], [build_alias], [0], [The build system])dnl
+_LT_DECL([], [build], [0])dnl
+_LT_DECL([], [build_os], [0])dnl
+dnl
 AC_REQUIRE([AC_PROG_CC])dnl
-AC_REQUIRE([AC_PROG_LD])dnl
-AC_REQUIRE([AC_PROG_LD_RELOAD_FLAG])dnl
-AC_REQUIRE([AC_PROG_NM])dnl
-
+AC_REQUIRE([LT_PATH_LD])dnl
+AC_REQUIRE([LT_PATH_NM])dnl
+dnl
 AC_REQUIRE([AC_PROG_LN_S])dnl
-AC_REQUIRE([AC_DEPLIBS_CHECK_METHOD])dnl
-# Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers!
-AC_REQUIRE([AC_OBJEXT])dnl
-AC_REQUIRE([AC_EXEEXT])dnl
+test -z "$LN_S" && LN_S="ln -s"
+_LT_DECL([], [LN_S], [1], [Whether we need soft or hard links])dnl
 dnl
-AC_LIBTOOL_SYS_MAX_CMD_LEN
-AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE
-AC_LIBTOOL_OBJDIR
+AC_REQUIRE([LT_CMD_MAX_LEN])dnl
+_LT_DECL([objext], [ac_objext], [0], [Object file suffix (normally "o")])dnl
+_LT_DECL([], [exeext], [0], [Executable file suffix (normally "")])dnl
+dnl
+m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+m4_require([_LT_CHECK_SHELL_FEATURES])dnl
+m4_require([_LT_CMD_RELOAD])dnl
+m4_require([_LT_CHECK_MAGIC_METHOD])dnl
+m4_require([_LT_CMD_OLD_ARCHIVE])dnl
+m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl
+
+_LT_CONFIG_LIBTOOL_INIT([
+# See if we are running on zsh, and set the options which allow our
+# commands through without removal of \ escapes INIT.
+if test -n "\${ZSH_VERSION+set}" ; then
+   setopt NO_GLOB_SUBST
+fi
+])
+if test -n "${ZSH_VERSION+set}" ; then
+   setopt NO_GLOB_SUBST
+fi
 
-AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl
-_LT_AC_PROG_ECHO_BACKSLASH
+_LT_CHECK_OBJDIR
+
+m4_require([_LT_TAG_COMPILER])dnl
+_LT_PROG_ECHO_BACKSLASH
 
 case $host_os in
 aix3*)
@@ -130,116 +216,653 @@
 
 # Sed substitution that helps us do robust quoting.  It backslashifies
 # metacharacters that are still active within double-quoted strings.
-Xsed='sed -e 1s/^X//'
-[sed_quote_subst='s/\([\\"\\`$\\\\]\)/\\\1/g']
+sed_quote_subst='s/\([["`$\\]]\)/\\\1/g'
 
 # Same as above, but do not quote variable references.
-[double_quote_subst='s/\([\\"\\`\\\\]\)/\\\1/g']
+double_quote_subst='s/\([["`\\]]\)/\\\1/g'
 
 # Sed substitution to delay expansion of an escaped shell variable in a
 # double_quote_subst'ed string.
 delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
 
+# Sed substitution to delay expansion of an escaped single quote.
+delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g'
+
 # Sed substitution to avoid accidental globbing in evaled expressions
 no_glob_subst='s/\*/\\\*/g'
 
-# Constants:
-rm="rm -f"
-
 # Global variables:
-default_ofile=libtool
+ofile=libtool
 can_build_shared=yes
 
 # All known linkers require a `.a' archive for static linking (except MSVC,
 # which needs '.lib').
 libext=a
-ltmain="$ac_aux_dir/ltmain.sh"
-ofile="$default_ofile"
-with_gnu_ld="$lt_cv_prog_gnu_ld"
 
-AC_CHECK_TOOL(AR, ar, false)
-AC_CHECK_TOOL(RANLIB, ranlib, :)
-AC_CHECK_TOOL(STRIP, strip, :)
+with_gnu_ld="$lt_cv_prog_gnu_ld"
 
 old_CC="$CC"
 old_CFLAGS="$CFLAGS"
 
 # Set sane defaults for various variables
-test -z "$AR" && AR=ar
-test -z "$AR_FLAGS" && AR_FLAGS=cru
-test -z "$AS" && AS=as
 test -z "$CC" && CC=cc
 test -z "$LTCC" && LTCC=$CC
 test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS
-test -z "$DLLTOOL" && DLLTOOL=dlltool
 test -z "$LD" && LD=ld
-test -z "$LN_S" && LN_S="ln -s"
-test -z "$MAGIC_CMD" && MAGIC_CMD=file
-test -z "$NM" && NM=nm
-test -z "$SED" && SED=sed
-test -z "$OBJDUMP" && OBJDUMP=objdump
-test -z "$RANLIB" && RANLIB=:
-test -z "$STRIP" && STRIP=:
 test -z "$ac_objext" && ac_objext=o
 
-# Determine commands to create old-style static archives.
-old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs'
-old_postinstall_cmds='chmod 644 $oldlib'
-old_postuninstall_cmds=
-
-if test -n "$RANLIB"; then
-  case $host_os in
-  openbsd*)
-    old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$oldlib"
-    ;;
-  *)
-    old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$oldlib"
-    ;;
-  esac
-  old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib"
-fi
-
 _LT_CC_BASENAME([$compiler])
 
 # Only perform the check for file, if the check method requires it
+test -z "$MAGIC_CMD" && MAGIC_CMD=file
 case $deplibs_check_method in
 file_magic*)
   if test "$file_magic_cmd" = '$MAGIC_CMD'; then
-    AC_PATH_MAGIC
+    _LT_PATH_MAGIC
   fi
   ;;
 esac
 
-_LT_REQUIRED_DARWIN_CHECKS
+# Use C for the default configuration in the libtool script
+LT_SUPPORTED_TAG([CC])
+_LT_LANG_C_CONFIG
+_LT_LANG_DEFAULT_CONFIG
+_LT_CONFIG_COMMANDS
+])# _LT_SETUP
+
 
-AC_PROVIDE_IFELSE([AC_LIBTOOL_DLOPEN], enable_dlopen=yes, enable_dlopen=no)
-AC_PROVIDE_IFELSE([AC_LIBTOOL_WIN32_DLL],
-enable_win32_dll=yes, enable_win32_dll=no)
-
-AC_ARG_ENABLE([libtool-lock],
-    [AC_HELP_STRING([--disable-libtool-lock],
-	[avoid locking (might break parallel builds)])])
-test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
+# _LT_PROG_LTMAIN
+# ---------------
+# Note that this code is called both from `configure', and `config.status'
+# now that we use AC_CONFIG_COMMANDS to generate libtool.  Notably,
+# `config.status' has no value for ac_aux_dir unless we are using Automake,
+# so we pass a copy along to make sure it has a sensible value anyway.
+m4_defun([_LT_PROG_LTMAIN],
+[m4_ifdef([AC_REQUIRE_AUX_FILE], [AC_REQUIRE_AUX_FILE([ltmain.sh])])dnl
+_LT_CONFIG_LIBTOOL_INIT([ac_aux_dir='$ac_aux_dir'])
+ltmain="$ac_aux_dir/ltmain.sh"
+])# _LT_PROG_LTMAIN
 
-AC_ARG_WITH([pic],
-    [AC_HELP_STRING([--with-pic],
-	[try to use only PIC/non-PIC objects @<:@default=use both@:>@])],
-    [pic_mode="$withval"],
-    [pic_mode=default])
-test -z "$pic_mode" && pic_mode=default
 
-# Use C for the default configuration in the libtool script
-tagname=
-AC_LIBTOOL_LANG_C_CONFIG
-_LT_AC_TAGCONFIG
-])# AC_LIBTOOL_SETUP
+
+# So that we can recreate a full libtool script including additional
+# tags, we accumulate the chunks of code to send to AC_CONFIG_COMMANDS
+# in macros and then make a single call at the end using the `libtool'
+# label.
+
+
+# _LT_CONFIG_LIBTOOL_INIT([INIT-COMMANDS])
+# ----------------------------------------
+# Register INIT-COMMANDS to be passed to AC_CONFIG_COMMANDS later.
+m4_define([_LT_CONFIG_LIBTOOL_INIT],
+[m4_ifval([$1],
+          [m4_append([_LT_OUTPUT_LIBTOOL_INIT],
+                     [$1
+])])])
+
+# Initialize.
+m4_define([_LT_OUTPUT_LIBTOOL_INIT])
+
+
+# _LT_CONFIG_LIBTOOL([COMMANDS])
+# ------------------------------
+# Register COMMANDS to be passed to AC_CONFIG_COMMANDS later.
+m4_define([_LT_CONFIG_LIBTOOL],
+[m4_ifval([$1],
+          [m4_append([_LT_OUTPUT_LIBTOOL_COMMANDS],
+                     [$1
+])])])
+
+# Initialize.
+m4_define([_LT_OUTPUT_LIBTOOL_COMMANDS])
+
+
+# _LT_CONFIG_SAVE_COMMANDS([COMMANDS], [INIT_COMMANDS])
+# -----------------------------------------------------
+m4_defun([_LT_CONFIG_SAVE_COMMANDS],
+[_LT_CONFIG_LIBTOOL([$1])
+_LT_CONFIG_LIBTOOL_INIT([$2])
+])
+
+
+# _LT_FORMAT_COMMENT([COMMENT])
+# -----------------------------
+# Add leading comment marks to the start of each line, and a trailing
+# full-stop to the whole comment if one is not present already.
+m4_define([_LT_FORMAT_COMMENT],
+[m4_ifval([$1], [
+m4_bpatsubst([m4_bpatsubst([$1], [^ *], [# ])],
+              [['`$\]], [\\\&])]m4_bmatch([$1], [[!?.]$], [], [.])
+)])
+
+
+
+
+
+# _LT_DECL([CONFIGNAME], VARNAME, VALUE, [DESCRIPTION], [IS-TAGGED?])
+# -------------------------------------------------------------------
+# CONFIGNAME is the name given to the value in the libtool script.
+# VARNAME is the (base) name used in the configure script.
+# VALUE may be 0, 1 or 2 for a computed quote escaped value based on
+# VARNAME.  Any other value will be used directly.
+m4_define([_LT_DECL],
+[lt_if_append_uniq([lt_decl_varnames], [$2], [, ],
+    [lt_dict_add_subkey([lt_decl_dict], [$2], [libtool_name],
+	[m4_ifval([$1], [$1], [$2])])
+    lt_dict_add_subkey([lt_decl_dict], [$2], [value], [$3])
+    m4_ifval([$4],
+	[lt_dict_add_subkey([lt_decl_dict], [$2], [description], [$4])])
+    lt_dict_add_subkey([lt_decl_dict], [$2],
+	[tagged?], [m4_ifval([$5], [yes], [no])])])
+])
+
+
+# _LT_TAGDECL([CONFIGNAME], VARNAME, VALUE, [DESCRIPTION])
+# --------------------------------------------------------
+m4_define([_LT_TAGDECL], [_LT_DECL([$1], [$2], [$3], [$4], [yes])])
+
+
+# lt_decl_tag_varnames([SEPARATOR], [VARNAME1...])
+# ------------------------------------------------
+m4_define([lt_decl_tag_varnames],
+[_lt_decl_filter([tagged?], [yes], $@)])
+
+
+# _lt_decl_filter(SUBKEY, VALUE, [SEPARATOR], [VARNAME1..])
+# ---------------------------------------------------------
+m4_define([_lt_decl_filter],
+[m4_case([$#],
+  [0], [m4_fatal([$0: too few arguments: $#])],
+  [1], [m4_fatal([$0: too few arguments: $#: $1])],
+  [2], [lt_dict_filter([lt_decl_dict], [$1], [$2], [], lt_decl_varnames)],
+  [3], [lt_dict_filter([lt_decl_dict], [$1], [$2], [$3], lt_decl_varnames)],
+  [lt_dict_filter([lt_decl_dict], $@)])[]dnl
+])
+
+
+# lt_decl_quote_varnames([SEPARATOR], [VARNAME1...])
+# --------------------------------------------------
+m4_define([lt_decl_quote_varnames],
+[_lt_decl_filter([value], [1], $@)])
+
+
+# lt_decl_dquote_varnames([SEPARATOR], [VARNAME1...])
+# ---------------------------------------------------
+m4_define([lt_decl_dquote_varnames],
+[_lt_decl_filter([value], [2], $@)])
+
+
+# lt_decl_varnames_tagged([SEPARATOR], [VARNAME1...])
+# ---------------------------------------------------
+m4_define([lt_decl_varnames_tagged],
+[m4_assert([$# <= 2])dnl
+_$0(m4_quote(m4_default([$1], [[, ]])),
+    m4_ifval([$2], [[$2]], [m4_dquote(lt_decl_tag_varnames)]),
+    m4_split(m4_normalize(m4_quote(_LT_TAGS)), [ ]))])
+m4_define([_lt_decl_varnames_tagged],
+[m4_ifval([$3], [lt_combine([$1], [$2], [_], $3)])])
+
+
+# lt_decl_all_varnames([SEPARATOR], [VARNAME1...])
+# ------------------------------------------------
+m4_define([lt_decl_all_varnames],
+[_$0(m4_quote(m4_default([$1], [[, ]])),
+     m4_if([$2], [],
+	   m4_quote(lt_decl_varnames),
+	m4_quote(m4_shift($@))))[]dnl
+])
+m4_define([_lt_decl_all_varnames],
+[lt_join($@, lt_decl_varnames_tagged([$1],
+			lt_decl_tag_varnames([[, ]], m4_shift($@))))dnl
+])
+
+
+# _LT_CONFIG_STATUS_DECLARE([VARNAME])
+# ------------------------------------
+# Quote a variable value, and forward it to `config.status' so that its
+# declaration there will have the same value as in `configure'.  VARNAME
+# must have a single quote delimited value for this to work.
+m4_define([_LT_CONFIG_STATUS_DECLARE],
+[$1='`$ECHO "X$][$1" | $Xsed -e "$delay_single_quote_subst"`'])
+
+
+# _LT_CONFIG_STATUS_DECLARATIONS
+# ------------------------------
+# We delimit libtool config variables with single quotes, so when
+# we write them to config.status, we have to be sure to quote all
+# embedded single quotes properly.  In configure, this macro expands
+# each variable declared with _LT_DECL (and _LT_TAGDECL) into:
+#
+#    <var>='`$ECHO "X$<var>" | $Xsed -e "$delay_single_quote_subst"`'
+m4_defun([_LT_CONFIG_STATUS_DECLARATIONS],
+[m4_foreach([_lt_var], m4_quote(lt_decl_all_varnames),
+    [m4_n([_LT_CONFIG_STATUS_DECLARE(_lt_var)])])])
+
+
+# _LT_LIBTOOL_TAGS
+# ----------------
+# Output comment and list of tags supported by the script
+m4_defun([_LT_LIBTOOL_TAGS],
+[_LT_FORMAT_COMMENT([The names of the tagged configurations supported by this script])dnl
+available_tags="_LT_TAGS"dnl
+])
+
+
+# _LT_LIBTOOL_DECLARE(VARNAME, [TAG])
+# -----------------------------------
+# Extract the dictionary values for VARNAME (optionally with TAG) and
+# expand to a commented shell variable setting:
+#
+#    # Some comment about what VAR is for.
+#    visible_name=$lt_internal_name
+m4_define([_LT_LIBTOOL_DECLARE],
+[_LT_FORMAT_COMMENT(m4_quote(lt_dict_fetch([lt_decl_dict], [$1],
+					   [description])))[]dnl
+m4_pushdef([_libtool_name],
+    m4_quote(lt_dict_fetch([lt_decl_dict], [$1], [libtool_name])))[]dnl
+m4_case(m4_quote(lt_dict_fetch([lt_decl_dict], [$1], [value])),
+    [0], [_libtool_name=[$]$1],
+    [1], [_libtool_name=$lt_[]$1],
+    [2], [_libtool_name=$lt_[]$1],
+    [_libtool_name=lt_dict_fetch([lt_decl_dict], [$1], [value])])[]dnl
+m4_ifval([$2], [_$2])[]m4_popdef([_libtool_name])[]dnl
+])
+
+
+# _LT_LIBTOOL_CONFIG_VARS
+# -----------------------
+# Produce commented declarations of non-tagged libtool config variables
+# suitable for insertion in the LIBTOOL CONFIG section of the `libtool'
+# script.  Tagged libtool config variables (even for the LIBTOOL CONFIG
+# section) are produced by _LT_LIBTOOL_TAG_VARS.
+m4_defun([_LT_LIBTOOL_CONFIG_VARS],
+[m4_foreach([_lt_var],
+    m4_quote(_lt_decl_filter([tagged?], [no], [], lt_decl_varnames)),
+    [m4_n([_LT_LIBTOOL_DECLARE(_lt_var)])])])
+
+
+# _LT_LIBTOOL_TAG_VARS(TAG)
+# -------------------------
+m4_define([_LT_LIBTOOL_TAG_VARS],
+[m4_foreach([_lt_var], m4_quote(lt_decl_tag_varnames),
+    [m4_n([_LT_LIBTOOL_DECLARE(_lt_var, [$1])])])])
+
+
+# _LT_TAGVAR(VARNAME, [TAGNAME])
+# ------------------------------
+m4_define([_LT_TAGVAR], [m4_ifval([$2], [$1_$2], [$1])])
 
 
-# _LT_AC_SYS_COMPILER
+# _LT_CONFIG_COMMANDS
 # -------------------
-AC_DEFUN([_LT_AC_SYS_COMPILER],
+# Send accumulated output to $CONFIG_STATUS.  Thanks to the lists of
+# variables for single and double quote escaping we saved from calls
+# to _LT_DECL, we can put quote escaped variables declarations
+# into `config.status', and then the shell code to quote escape them in
+# for loops in `config.status'.  Finally, any additional code accumulated
+# from calls to _LT_CONFIG_LIBTOOL_INIT is expanded.
+m4_defun([_LT_CONFIG_COMMANDS],
+[AC_PROVIDE_IFELSE([LT_OUTPUT],
+	dnl If the libtool generation code has been placed in $CONFIG_LT,
+	dnl instead of duplicating it all over again into config.status,
+	dnl then we will have config.status run $CONFIG_LT later, so it
+	dnl needs to know what name is stored there:
+        [AC_CONFIG_COMMANDS([libtool],
+            [$SHELL $CONFIG_LT || AS_EXIT(1)], [CONFIG_LT='$CONFIG_LT'])],
+    dnl If the libtool generation code is destined for config.status,
+    dnl expand the accumulated commands and init code now:
+    [AC_CONFIG_COMMANDS([libtool],
+        [_LT_OUTPUT_LIBTOOL_COMMANDS], [_LT_OUTPUT_LIBTOOL_COMMANDS_INIT])])
+])#_LT_CONFIG_COMMANDS
+
+
+# Initialize.
+m4_define([_LT_OUTPUT_LIBTOOL_COMMANDS_INIT],
+[
+
+# The HP-UX ksh and POSIX shell print the target directory to stdout
+# if CDPATH is set.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+sed_quote_subst='$sed_quote_subst'
+double_quote_subst='$double_quote_subst'
+delay_variable_subst='$delay_variable_subst'
+_LT_CONFIG_STATUS_DECLARATIONS
+LTCC='$LTCC'
+LTCFLAGS='$LTCFLAGS'
+compiler='$compiler_DEFAULT'
+
+# Quote evaled strings.
+for var in lt_decl_all_varnames([[ \
+]], lt_decl_quote_varnames); do
+    case \`eval \\\\\$ECHO "X\\\\\$\$var"\` in
+    *[[\\\\\\\`\\"\\\$]]*)
+      eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"X\\\$\$var\\" | \\\$Xsed -e \\"\\\$sed_quote_subst\\"\\\`\\\\\\""
+      ;;
+    *)
+      eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
+      ;;
+    esac
+done
+
+# Double-quote double-evaled strings.
+for var in lt_decl_all_varnames([[ \
+]], lt_decl_dquote_varnames); do
+    case \`eval \\\\\$ECHO "X\\\\\$\$var"\` in
+    *[[\\\\\\\`\\"\\\$]]*)
+      eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"X\\\$\$var\\" | \\\$Xsed -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\""
+      ;;
+    *)
+      eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
+      ;;
+    esac
+done
+
+# Fix-up fallback echo if it was mangled by the above quoting rules.
+case \$lt_ECHO in
+*'\\\[$]0 --fallback-echo"')dnl "
+  lt_ECHO=\`\$ECHO "X\$lt_ECHO" | \$Xsed -e 's/\\\\\\\\\\\\\\\[$]0 --fallback-echo"\[$]/\[$]0 --fallback-echo"/'\`
+  ;;
+esac
+
+_LT_OUTPUT_LIBTOOL_INIT
+])
+
+
+# LT_OUTPUT
+# ---------
+# This macro allows early generation of the libtool script (before
+# AC_OUTPUT is called), incase it is used in configure for compilation
+# tests.
+AC_DEFUN([LT_OUTPUT],
+[: ${CONFIG_LT=./config.lt}
+AC_MSG_NOTICE([creating $CONFIG_LT])
+cat >"$CONFIG_LT" <<_LTEOF
+#! $SHELL
+# Generated by $as_me.
+# Run this file to recreate a libtool stub with the current configuration.
+
+lt_cl_silent=false
+SHELL=\${CONFIG_SHELL-$SHELL}
+_LTEOF
+
+cat >>"$CONFIG_LT" <<\_LTEOF
+AS_SHELL_SANITIZE
+_AS_PREPARE
+
+exec AS_MESSAGE_FD>&1
+exec AS_MESSAGE_LOG_FD>>config.log
+{
+  echo
+  AS_BOX([Running $as_me.])
+} >&AS_MESSAGE_LOG_FD
+
+lt_cl_help="\
+\`$as_me' creates a local libtool stub from the current configuration,
+for use in further configure time tests before the real libtool is
+generated.
+
+Usage: $[0] [[OPTIONS]]
+
+  -h, --help      print this help, then exit
+  -V, --version   print version number, then exit
+  -q, --quiet     do not print progress messages
+  -d, --debug     don't remove temporary files
+
+Report bugs to <bug-libtool@gnu.org>."
+
+lt_cl_version="\
+m4_ifset([AC_PACKAGE_NAME], [AC_PACKAGE_NAME ])config.lt[]dnl
+m4_ifset([AC_PACKAGE_VERSION], [ AC_PACKAGE_VERSION])
+configured by $[0], generated by m4_PACKAGE_STRING.
+
+Copyright (C) 2008 Free Software Foundation, Inc.
+This config.lt script is free software; the Free Software Foundation
+gives unlimited permision to copy, distribute and modify it."
+
+while test $[#] != 0
+do
+  case $[1] in
+    --version | --v* | -V )
+      echo "$lt_cl_version"; exit 0 ;;
+    --help | --h* | -h )
+      echo "$lt_cl_help"; exit 0 ;;
+    --debug | --d* | -d )
+      debug=: ;;
+    --quiet | --q* | --silent | --s* | -q )
+      lt_cl_silent=: ;;
+
+    -*) AC_MSG_ERROR([unrecognized option: $[1]
+Try \`$[0] --help' for more information.]) ;;
+
+    *) AC_MSG_ERROR([unrecognized argument: $[1]
+Try \`$[0] --help' for more information.]) ;;
+  esac
+  shift
+done
+
+if $lt_cl_silent; then
+  exec AS_MESSAGE_FD>/dev/null
+fi
+_LTEOF
+
+cat >>"$CONFIG_LT" <<_LTEOF
+_LT_OUTPUT_LIBTOOL_COMMANDS_INIT
+_LTEOF
+
+cat >>"$CONFIG_LT" <<\_LTEOF
+AC_MSG_NOTICE([creating $ofile])
+_LT_OUTPUT_LIBTOOL_COMMANDS
+AS_EXIT(0)
+_LTEOF
+chmod +x "$CONFIG_LT"
+
+# configure is writing to config.log, but config.lt does its own redirection,
+# appending to config.log, which fails on DOS, as config.log is still kept
+# open by configure.  Here we exec the FD to /dev/null, effectively closing
+# config.log, so it can be properly (re)opened and appended to by config.lt.
+if test "$no_create" != yes; then
+  lt_cl_success=:
+  test "$silent" = yes &&
+    lt_config_lt_args="$lt_config_lt_args --quiet"
+  exec AS_MESSAGE_LOG_FD>/dev/null
+  $SHELL "$CONFIG_LT" $lt_config_lt_args || lt_cl_success=false
+  exec AS_MESSAGE_LOG_FD>>config.log
+  $lt_cl_success || AS_EXIT(1)
+fi
+])# LT_OUTPUT
+
+
+# _LT_CONFIG(TAG)
+# ---------------
+# If TAG is the built-in tag, create an initial libtool script with a
+# default configuration from the untagged config vars.  Otherwise add code
+# to config.status for appending the configuration named by TAG from the
+# matching tagged config vars.
+m4_defun([_LT_CONFIG],
+[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+_LT_CONFIG_SAVE_COMMANDS([
+  m4_define([_LT_TAG], m4_if([$1], [], [C], [$1]))dnl
+  m4_if(_LT_TAG, [C], [
+    # See if we are running on zsh, and set the options which allow our
+    # commands through without removal of \ escapes.
+    if test -n "${ZSH_VERSION+set}" ; then
+      setopt NO_GLOB_SUBST
+    fi
+
+    cfgfile="${ofile}T"
+    trap "$RM \"$cfgfile\"; exit 1" 1 2 15
+    $RM "$cfgfile"
+
+    cat <<_LT_EOF >> "$cfgfile"
+#! $SHELL
+
+# `$ECHO "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services.
+# Generated automatically by $as_me ($PACKAGE$TIMESTAMP) $VERSION
+# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
+# NOTE: Changes made to this file will be lost: look at ltmain.sh.
+#
+_LT_COPYING
+_LT_LIBTOOL_TAGS
+
+# ### BEGIN LIBTOOL CONFIG
+_LT_LIBTOOL_CONFIG_VARS
+_LT_LIBTOOL_TAG_VARS
+# ### END LIBTOOL CONFIG
+
+_LT_EOF
+
+  case $host_os in
+  aix3*)
+    cat <<\_LT_EOF >> "$cfgfile"
+# AIX sometimes has problems with the GCC collect2 program.  For some
+# reason, if we set the COLLECT_NAMES environment variable, the problems
+# vanish in a puff of smoke.
+if test "X${COLLECT_NAMES+set}" != Xset; then
+  COLLECT_NAMES=
+  export COLLECT_NAMES
+fi
+_LT_EOF
+    ;;
+  esac
+
+  _LT_PROG_LTMAIN
+
+  # We use sed instead of cat because bash on DJGPP gets confused if
+  # if finds mixed CR/LF and LF-only lines.  Since sed operates in
+  # text mode, it properly converts lines to CR/LF.  This bash problem
+  # is reportedly fixed, but why not run on old versions too?
+  sed '/^# Generated shell functions inserted here/q' "$ltmain" >> "$cfgfile" \
+    || (rm -f "$cfgfile"; exit 1)
+
+  _LT_PROG_XSI_SHELLFNS
+
+  sed -n '/^# Generated shell functions inserted here/,$p' "$ltmain" >> "$cfgfile" \
+    || (rm -f "$cfgfile"; exit 1)
+
+  mv -f "$cfgfile" "$ofile" ||
+    (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")
+  chmod +x "$ofile"
+],
+[cat <<_LT_EOF >> "$ofile"
+
+dnl Unfortunately we have to use $1 here, since _LT_TAG is not expanded
+dnl in a comment (ie after a #).
+# ### BEGIN LIBTOOL TAG CONFIG: $1
+_LT_LIBTOOL_TAG_VARS(_LT_TAG)
+# ### END LIBTOOL TAG CONFIG: $1
+_LT_EOF
+])dnl /m4_if
+],
+[m4_if([$1], [], [
+    PACKAGE='$PACKAGE'
+    VERSION='$VERSION'
+    TIMESTAMP='$TIMESTAMP'
+    RM='$RM'
+    ofile='$ofile'], [])
+])dnl /_LT_CONFIG_SAVE_COMMANDS
+])# _LT_CONFIG
+
+
+# LT_SUPPORTED_TAG(TAG)
+# ---------------------
+# Trace this macro to discover what tags are supported by the libtool
+# --tag option, using:
+#    autoconf --trace 'LT_SUPPORTED_TAG:$1'
+AC_DEFUN([LT_SUPPORTED_TAG], [])
+
+
+# C support is built-in for now
+m4_define([_LT_LANG_C_enabled], [])
+m4_define([_LT_TAGS], [])
+
+
+# LT_LANG(LANG)
+# -------------
+# Enable libtool support for the given language if not already enabled.
+AC_DEFUN([LT_LANG],
+[AC_BEFORE([$0], [LT_OUTPUT])dnl
+m4_case([$1],
+  [C],			[_LT_LANG(C)],
+  [C++],		[_LT_LANG(CXX)],
+  [Java],		[_LT_LANG(GCJ)],
+  [Fortran 77],		[_LT_LANG(F77)],
+  [Fortran],		[_LT_LANG(FC)],
+  [Windows Resource],	[_LT_LANG(RC)],
+  [m4_ifdef([_LT_LANG_]$1[_CONFIG],
+    [_LT_LANG($1)],
+    [m4_fatal([$0: unsupported language: "$1"])])])dnl
+])# LT_LANG
+
+
+# _LT_LANG(LANGNAME)
+# ------------------
+m4_defun([_LT_LANG],
+[m4_ifdef([_LT_LANG_]$1[_enabled], [],
+  [LT_SUPPORTED_TAG([$1])dnl
+  m4_append([_LT_TAGS], [$1 ])dnl
+  m4_define([_LT_LANG_]$1[_enabled], [])dnl
+  _LT_LANG_$1_CONFIG($1)])dnl
+])# _LT_LANG
+
+
+# _LT_LANG_DEFAULT_CONFIG
+# -----------------------
+m4_defun([_LT_LANG_DEFAULT_CONFIG],
+[AC_PROVIDE_IFELSE([AC_PROG_CXX],
+  [LT_LANG(CXX)],
+  [m4_define([AC_PROG_CXX], defn([AC_PROG_CXX])[LT_LANG(CXX)])])
+
+AC_PROVIDE_IFELSE([AC_PROG_F77],
+  [LT_LANG(F77)],
+  [m4_define([AC_PROG_F77], defn([AC_PROG_F77])[LT_LANG(F77)])])
+
+AC_PROVIDE_IFELSE([AC_PROG_FC],
+  [LT_LANG(FC)],
+  [m4_define([AC_PROG_FC], defn([AC_PROG_FC])[LT_LANG(FC)])])
+
+dnl The call to [A][M_PROG_GCJ] is quoted like that to stop aclocal
+dnl pulling things in needlessly.
+AC_PROVIDE_IFELSE([AC_PROG_GCJ],
+  [LT_LANG(GCJ)],
+  [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],
+    [LT_LANG(GCJ)],
+    [AC_PROVIDE_IFELSE([LT_PROG_GCJ],
+      [LT_LANG(GCJ)],
+      [m4_ifdef([AC_PROG_GCJ],
+	[m4_define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[LT_LANG(GCJ)])])
+       m4_ifdef([A][M_PROG_GCJ],
+	[m4_define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[LT_LANG(GCJ)])])
+       m4_ifdef([LT_PROG_GCJ],
+	[m4_define([LT_PROG_GCJ], defn([LT_PROG_GCJ])[LT_LANG(GCJ)])])])])])
+
+AC_PROVIDE_IFELSE([LT_PROG_RC],
+  [LT_LANG(RC)],
+  [m4_define([LT_PROG_RC], defn([LT_PROG_RC])[LT_LANG(RC)])])
+])# _LT_LANG_DEFAULT_CONFIG
+
+# Obsolete macros:
+AU_DEFUN([AC_LIBTOOL_CXX], [LT_LANG(C++)])
+AU_DEFUN([AC_LIBTOOL_F77], [LT_LANG(Fortran 77)])
+AU_DEFUN([AC_LIBTOOL_FC], [LT_LANG(Fortran)])
+AU_DEFUN([AC_LIBTOOL_GCJ], [LT_LANG(Java)])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LIBTOOL_CXX], [])
+dnl AC_DEFUN([AC_LIBTOOL_F77], [])
+dnl AC_DEFUN([AC_LIBTOOL_FC], [])
+dnl AC_DEFUN([AC_LIBTOOL_GCJ], [])
+
+
+# _LT_TAG_COMPILER
+# ----------------
+m4_defun([_LT_TAG_COMPILER],
 [AC_REQUIRE([AC_PROG_CC])dnl
 
+_LT_DECL([LTCC], [CC], [1], [A C compiler])dnl
+_LT_DECL([LTCFLAGS], [CFLAGS], [1], [LTCC compiler flags])dnl
+_LT_TAGDECL([CC], [compiler], [1], [A language specific compiler])dnl
+_LT_TAGDECL([with_gcc], [GCC], [0], [Is the compiler the GNU compiler?])dnl
+
 # If no C compiler was specified, use CC.
 LTCC=${LTCC-"$CC"}
 
@@ -248,36 +871,20 @@
 
 # Allow CC to be a program name with arguments.
 compiler=$CC
-])# _LT_AC_SYS_COMPILER
-
-
-# _LT_CC_BASENAME(CC)
-# -------------------
-# Calculate cc_basename.  Skip known compiler wrappers and cross-prefix.
-AC_DEFUN([_LT_CC_BASENAME],
-[for cc_temp in $1""; do
-  case $cc_temp in
-    compile | *[[\\/]]compile | ccache | *[[\\/]]ccache ) ;;
-    distcc | *[[\\/]]distcc | purify | *[[\\/]]purify ) ;;
-    \-*) ;;
-    *) break;;
-  esac
-done
-cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
-])
+])# _LT_TAG_COMPILER
 
 
 # _LT_COMPILER_BOILERPLATE
 # ------------------------
 # Check for compiler boilerplate output or warnings with
 # the simple compiler test code.
-AC_DEFUN([_LT_COMPILER_BOILERPLATE],
-[AC_REQUIRE([LT_AC_PROG_SED])dnl
+m4_defun([_LT_COMPILER_BOILERPLATE],
+[m4_require([_LT_DECL_SED])dnl
 ac_outfile=conftest.$ac_objext
 echo "$lt_simple_compile_test_code" >conftest.$ac_ext
 eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
 _lt_compiler_boilerplate=`cat conftest.err`
-$rm conftest*
+$RM conftest*
 ])# _LT_COMPILER_BOILERPLATE
 
 
@@ -285,39 +892,57 @@
 # ----------------------
 # Check for linker boilerplate output or warnings with
 # the simple link test code.
-AC_DEFUN([_LT_LINKER_BOILERPLATE],
-[AC_REQUIRE([LT_AC_PROG_SED])dnl
+m4_defun([_LT_LINKER_BOILERPLATE],
+[m4_require([_LT_DECL_SED])dnl
 ac_outfile=conftest.$ac_objext
 echo "$lt_simple_link_test_code" >conftest.$ac_ext
 eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
 _lt_linker_boilerplate=`cat conftest.err`
-$rm -r conftest*
+$RM -r conftest*
 ])# _LT_LINKER_BOILERPLATE
 
 # _LT_REQUIRED_DARWIN_CHECKS
-# --------------------------
-# Check for some things on darwin
-AC_DEFUN([_LT_REQUIRED_DARWIN_CHECKS],[
+# -------------------------
+m4_defun_once([_LT_REQUIRED_DARWIN_CHECKS],[
   case $host_os in
     rhapsody* | darwin*)
     AC_CHECK_TOOL([DSYMUTIL], [dsymutil], [:])
     AC_CHECK_TOOL([NMEDIT], [nmedit], [:])
+    AC_CHECK_TOOL([LIPO], [lipo], [:])
+    AC_CHECK_TOOL([OTOOL], [otool], [:])
+    AC_CHECK_TOOL([OTOOL64], [otool64], [:])
+    _LT_DECL([], [DSYMUTIL], [1],
+      [Tool to manipulate archived DWARF debug symbol files on Mac OS X])
+    _LT_DECL([], [NMEDIT], [1],
+      [Tool to change global to local symbols on Mac OS X])
+    _LT_DECL([], [LIPO], [1],
+      [Tool to manipulate fat objects and archives on Mac OS X])
+    _LT_DECL([], [OTOOL], [1],
+      [ldd/readelf like tool for Mach-O binaries on Mac OS X])
+    _LT_DECL([], [OTOOL64], [1],
+      [ldd/readelf like tool for 64 bit Mach-O binaries on Mac OS X 10.4])
 
     AC_CACHE_CHECK([for -single_module linker flag],[lt_cv_apple_cc_single_mod],
       [lt_cv_apple_cc_single_mod=no
       if test -z "${LT_MULTI_MODULE}"; then
-   # By default we will add the -single_module flag. You can override
-   # by either setting the environment variable LT_MULTI_MODULE
-   # non-empty at configure time, or by adding -multi_module to the
-   # link flags.
-   echo "int foo(void){return 1;}" > conftest.c
-   $LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
-     -dynamiclib ${wl}-single_module conftest.c
-   if test -f libconftest.dylib; then
-     lt_cv_apple_cc_single_mod=yes
-     rm -rf libconftest.dylib*
-   fi
-   rm conftest.c
+	# By default we will add the -single_module flag. You can override
+	# by either setting the environment variable LT_MULTI_MODULE
+	# non-empty at configure time, or by adding -multi_module to the
+	# link flags.
+	rm -rf libconftest.dylib*
+	echo "int foo(void){return 1;}" > conftest.c
+	echo "$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
+-dynamiclib -Wl,-single_module conftest.c" >&AS_MESSAGE_LOG_FD
+	$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
+	  -dynamiclib -Wl,-single_module conftest.c 2>conftest.err
+        _lt_result=$?
+	if test -f libconftest.dylib && test ! -s conftest.err && test $_lt_result = 0; then
+	  lt_cv_apple_cc_single_mod=yes
+	else
+	  cat conftest.err >&AS_MESSAGE_LOG_FD
+	fi
+	rm -rf libconftest.dylib*
+	rm -f conftest.*
       fi])
     AC_CACHE_CHECK([for -exported_symbols_list linker flag],
       [lt_cv_ld_exported_symbols_list],
@@ -326,26 +951,26 @@
       echo "_main" > conftest.sym
       LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym"
       AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])],
-   [lt_cv_ld_exported_symbols_list=yes],
-   [lt_cv_ld_exported_symbols_list=no])
-   LDFLAGS="$save_LDFLAGS"
+	[lt_cv_ld_exported_symbols_list=yes],
+	[lt_cv_ld_exported_symbols_list=no])
+	LDFLAGS="$save_LDFLAGS"
     ])
     case $host_os in
-    rhapsody* | darwin1.[[0123]])
+    rhapsody* | darwin1.[[012]])
       _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;;
     darwin1.*)
-     _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
-    darwin*)
+      _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
+    darwin*) # darwin 5.x on
       # if running on 10.5 or later, the deployment target defaults
       # to the OS version, if on x86, and 10.4, the deployment
       # target defaults to 10.4. Don't you love it?
       case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in
-   10.0,*86*-darwin8*|10.0,*-darwin[[91]]*)
-     _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
-   10.[[012]]*)
-     _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
-   10.*)
-     _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
+	10.0,*86*-darwin8*|10.0,*-darwin[[91]]*)
+	  _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
+	10.[[012]]*)
+	  _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
+	10.*)
+	  _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
       esac
     ;;
   esac
@@ -355,10 +980,10 @@
     if test "$lt_cv_ld_exported_symbols_list" = "yes"; then
       _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym'
     else
-      _lt_dar_export_syms="~$NMEDIT -s \$output_objdir/\${libname}-symbols.expsym \${lib}"
+      _lt_dar_export_syms='~$NMEDIT -s $output_objdir/${libname}-symbols.expsym ${lib}'
     fi
     if test "$DSYMUTIL" != ":"; then
-      _lt_dsymutil="~$DSYMUTIL \$lib || :"
+      _lt_dsymutil='~$DSYMUTIL $lib || :'
     else
       _lt_dsymutil=
     fi
@@ -366,16 +991,51 @@
   esac
 ])
 
-# _LT_AC_SYS_LIBPATH_AIX
-# ----------------------
-# Links a minimal program and checks the executable
-# for the system default hardcoded library path. In most cases,
-# this is /usr/lib:/lib, but when the MPI compilers are used
+
+# _LT_DARWIN_LINKER_FEATURES
+# --------------------------
+# Checks for linker and compiler features on darwin
+m4_defun([_LT_DARWIN_LINKER_FEATURES],
+[
+  m4_require([_LT_REQUIRED_DARWIN_CHECKS])
+  _LT_TAGVAR(archive_cmds_need_lc, $1)=no
+  _LT_TAGVAR(hardcode_direct, $1)=no
+  _LT_TAGVAR(hardcode_automatic, $1)=yes
+  _LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
+  _LT_TAGVAR(whole_archive_flag_spec, $1)=''
+  _LT_TAGVAR(link_all_deplibs, $1)=yes
+  _LT_TAGVAR(allow_undefined_flag, $1)="$_lt_dar_allow_undefined"
+  case $cc_basename in
+     ifort*) _lt_dar_can_shared=yes ;;
+     *) _lt_dar_can_shared=$GCC ;;
+  esac
+  if test "$_lt_dar_can_shared" = "yes"; then
+    output_verbose_link_cmd=echo
+    _LT_TAGVAR(archive_cmds, $1)="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}"
+    _LT_TAGVAR(module_cmds, $1)="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}"
+    _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}"
+    _LT_TAGVAR(module_expsym_cmds, $1)="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}"
+    m4_if([$1], [CXX],
+[   if test "$lt_cv_apple_cc_single_mod" != "yes"; then
+      _LT_TAGVAR(archive_cmds, $1)="\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dsymutil}"
+      _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dar_export_syms}${_lt_dsymutil}"
+    fi
+],[])
+  else
+  _LT_TAGVAR(ld_shlibs, $1)=no
+  fi
+])
+
+# _LT_SYS_MODULE_PATH_AIX
+# -----------------------
+# Links a minimal program and checks the executable
+# for the system default hardcoded library path. In most cases,
+# this is /usr/lib:/lib, but when the MPI compilers are used
 # the location of the communication and MPI libs are included too.
 # If we don't find anything, use the default library path according
 # to the aix ld manual.
-AC_DEFUN([_LT_AC_SYS_LIBPATH_AIX],
-[AC_REQUIRE([LT_AC_PROG_SED])dnl
+m4_defun([_LT_SYS_MODULE_PATH_AIX],
+[m4_require([_LT_DECL_SED])dnl
 AC_LINK_IFELSE(AC_LANG_PROGRAM,[
 lt_aix_libpath_sed='
     /Import File Strings/,/^$/ {
@@ -390,45 +1050,45 @@
   aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
 fi],[])
 if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
-])# _LT_AC_SYS_LIBPATH_AIX
+])# _LT_SYS_MODULE_PATH_AIX
 
 
-# _LT_AC_SHELL_INIT(ARG)
-# ----------------------
-AC_DEFUN([_LT_AC_SHELL_INIT],
+# _LT_SHELL_INIT(ARG)
+# -------------------
+m4_define([_LT_SHELL_INIT],
 [ifdef([AC_DIVERSION_NOTICE],
 	     [AC_DIVERT_PUSH(AC_DIVERSION_NOTICE)],
 	 [AC_DIVERT_PUSH(NOTICE)])
 $1
 AC_DIVERT_POP
-])# _LT_AC_SHELL_INIT
+])# _LT_SHELL_INIT
 
 
-# _LT_AC_PROG_ECHO_BACKSLASH
-# --------------------------
+# _LT_PROG_ECHO_BACKSLASH
+# -----------------------
 # Add some code to the start of the generated configure script which
 # will find an echo command which doesn't interpret backslashes.
-AC_DEFUN([_LT_AC_PROG_ECHO_BACKSLASH],
-[_LT_AC_SHELL_INIT([
+m4_defun([_LT_PROG_ECHO_BACKSLASH],
+[_LT_SHELL_INIT([
 # Check that we are running under the correct shell.
 SHELL=${CONFIG_SHELL-/bin/sh}
 
-case X$ECHO in
+case X$lt_ECHO in
 X*--fallback-echo)
   # Remove one level of quotation (which was required for Make).
-  ECHO=`echo "$ECHO" | sed 's,\\\\\[$]\\[$]0,'[$]0','`
+  ECHO=`echo "$lt_ECHO" | sed 's,\\\\\[$]\\[$]0,'[$]0','`
   ;;
 esac
 
-echo=${ECHO-echo}
+ECHO=${lt_ECHO-echo}
 if test "X[$]1" = X--no-reexec; then
   # Discard the --no-reexec flag, and continue.
   shift
 elif test "X[$]1" = X--fallback-echo; then
   # Avoid inline document here, it may be left over
   :
-elif test "X`($echo '\t') 2>/dev/null`" = 'X\t' ; then
-  # Yippee, $echo works!
+elif test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' ; then
+  # Yippee, $ECHO works!
   :
 else
   # Restart under the correct shell.
@@ -438,9 +1098,9 @@
 if test "X[$]1" = X--fallback-echo; then
   # used as fallback echo
   shift
-  cat <<EOF
+  cat <<_LT_EOF
 [$]*
-EOF
+_LT_EOF
   exit 0
 fi
 
@@ -448,124 +1108,127 @@
 # if CDPATH is set.
 (unset CDPATH) >/dev/null 2>&1 && unset CDPATH
 
-if test -z "$ECHO"; then
-if test "X${echo_test_string+set}" != Xset; then
-# find a string as large as possible, as long as the shell can cope with it
-  for cmd in 'sed 50q "[$]0"' 'sed 20q "[$]0"' 'sed 10q "[$]0"' 'sed 2q "[$]0"' 'echo test'; do
-    # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ...
-    if (echo_test_string=`eval $cmd`) 2>/dev/null &&
-       echo_test_string=`eval $cmd` &&
-       (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null
-    then
-      break
-    fi
-  done
-fi
+if test -z "$lt_ECHO"; then
+  if test "X${echo_test_string+set}" != Xset; then
+    # find a string as large as possible, as long as the shell can cope with it
+    for cmd in 'sed 50q "[$]0"' 'sed 20q "[$]0"' 'sed 10q "[$]0"' 'sed 2q "[$]0"' 'echo test'; do
+      # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ...
+      if { echo_test_string=`eval $cmd`; } 2>/dev/null &&
+	 { test "X$echo_test_string" = "X$echo_test_string"; } 2>/dev/null
+      then
+        break
+      fi
+    done
+  fi
 
-if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
-   echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
-   test "X$echo_testing_string" = "X$echo_test_string"; then
-  :
-else
-  # The Solaris, AIX, and Digital Unix default echo programs unquote
-  # backslashes.  This makes it impossible to quote backslashes using
-  #   echo "$something" | sed 's/\\/\\\\/g'
-  #
-  # So, first we look for a working echo in the user's PATH.
+  if test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' &&
+     echo_testing_string=`{ $ECHO "$echo_test_string"; } 2>/dev/null` &&
+     test "X$echo_testing_string" = "X$echo_test_string"; then
+    :
+  else
+    # The Solaris, AIX, and Digital Unix default echo programs unquote
+    # backslashes.  This makes it impossible to quote backslashes using
+    #   echo "$something" | sed 's/\\/\\\\/g'
+    #
+    # So, first we look for a working echo in the user's PATH.
 
-  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-  for dir in $PATH /usr/ucb; do
+    lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+    for dir in $PATH /usr/ucb; do
+      IFS="$lt_save_ifs"
+      if (test -f $dir/echo || test -f $dir/echo$ac_exeext) &&
+         test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' &&
+         echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` &&
+         test "X$echo_testing_string" = "X$echo_test_string"; then
+        ECHO="$dir/echo"
+        break
+      fi
+    done
     IFS="$lt_save_ifs"
-    if (test -f $dir/echo || test -f $dir/echo$ac_exeext) &&
-       test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' &&
-       echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` &&
-       test "X$echo_testing_string" = "X$echo_test_string"; then
-      echo="$dir/echo"
-      break
-    fi
-  done
-  IFS="$lt_save_ifs"
 
-  if test "X$echo" = Xecho; then
-    # We didn't find a better echo, so look for alternatives.
-    if test "X`(print -r '\t') 2>/dev/null`" = 'X\t' &&
-       echo_testing_string=`(print -r "$echo_test_string") 2>/dev/null` &&
-       test "X$echo_testing_string" = "X$echo_test_string"; then
-      # This shell has a builtin print -r that does the trick.
-      echo='print -r'
-    elif (test -f /bin/ksh || test -f /bin/ksh$ac_exeext) &&
-	 test "X$CONFIG_SHELL" != X/bin/ksh; then
-      # If we have ksh, try running configure again with it.
-      ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh}
-      export ORIGINAL_CONFIG_SHELL
-      CONFIG_SHELL=/bin/ksh
-      export CONFIG_SHELL
-      exec $CONFIG_SHELL "[$]0" --no-reexec ${1+"[$]@"}
-    else
-      # Try using printf.
-      echo='printf %s\n'
-      if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
-	 echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
-	 test "X$echo_testing_string" = "X$echo_test_string"; then
-	# Cool, printf works
-	:
-      elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` &&
-	   test "X$echo_testing_string" = 'X\t' &&
-	   echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
-	   test "X$echo_testing_string" = "X$echo_test_string"; then
-	CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL
-	export CONFIG_SHELL
-	SHELL="$CONFIG_SHELL"
-	export SHELL
-	echo="$CONFIG_SHELL [$]0 --fallback-echo"
-      elif echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` &&
-	   test "X$echo_testing_string" = 'X\t' &&
-	   echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
-	   test "X$echo_testing_string" = "X$echo_test_string"; then
-	echo="$CONFIG_SHELL [$]0 --fallback-echo"
+    if test "X$ECHO" = Xecho; then
+      # We didn't find a better echo, so look for alternatives.
+      if test "X`{ print -r '\t'; } 2>/dev/null`" = 'X\t' &&
+         echo_testing_string=`{ print -r "$echo_test_string"; } 2>/dev/null` &&
+         test "X$echo_testing_string" = "X$echo_test_string"; then
+        # This shell has a builtin print -r that does the trick.
+        ECHO='print -r'
+      elif { test -f /bin/ksh || test -f /bin/ksh$ac_exeext; } &&
+	   test "X$CONFIG_SHELL" != X/bin/ksh; then
+        # If we have ksh, try running configure again with it.
+        ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh}
+        export ORIGINAL_CONFIG_SHELL
+        CONFIG_SHELL=/bin/ksh
+        export CONFIG_SHELL
+        exec $CONFIG_SHELL "[$]0" --no-reexec ${1+"[$]@"}
       else
-	# maybe with a smaller string...
-	prev=:
+        # Try using printf.
+        ECHO='printf %s\n'
+        if test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' &&
+	   echo_testing_string=`{ $ECHO "$echo_test_string"; } 2>/dev/null` &&
+	   test "X$echo_testing_string" = "X$echo_test_string"; then
+	  # Cool, printf works
+	  :
+        elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` &&
+	     test "X$echo_testing_string" = 'X\t' &&
+	     echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
+	     test "X$echo_testing_string" = "X$echo_test_string"; then
+	  CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL
+	  export CONFIG_SHELL
+	  SHELL="$CONFIG_SHELL"
+	  export SHELL
+	  ECHO="$CONFIG_SHELL [$]0 --fallback-echo"
+        elif echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` &&
+	     test "X$echo_testing_string" = 'X\t' &&
+	     echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
+	     test "X$echo_testing_string" = "X$echo_test_string"; then
+	  ECHO="$CONFIG_SHELL [$]0 --fallback-echo"
+        else
+	  # maybe with a smaller string...
+	  prev=:
 
-	for cmd in 'echo test' 'sed 2q "[$]0"' 'sed 10q "[$]0"' 'sed 20q "[$]0"' 'sed 50q "[$]0"'; do
-	  if (test "X$echo_test_string" = "X`eval $cmd`") 2>/dev/null
-	  then
-	    break
-	  fi
-	  prev="$cmd"
-	done
+	  for cmd in 'echo test' 'sed 2q "[$]0"' 'sed 10q "[$]0"' 'sed 20q "[$]0"' 'sed 50q "[$]0"'; do
+	    if { test "X$echo_test_string" = "X`eval $cmd`"; } 2>/dev/null
+	    then
+	      break
+	    fi
+	    prev="$cmd"
+	  done
 
-	if test "$prev" != 'sed 50q "[$]0"'; then
-	  echo_test_string=`eval $prev`
-	  export echo_test_string
-	  exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "[$]0" ${1+"[$]@"}
-	else
-	  # Oops.  We lost completely, so just stick with echo.
-	  echo=echo
-	fi
+	  if test "$prev" != 'sed 50q "[$]0"'; then
+	    echo_test_string=`eval $prev`
+	    export echo_test_string
+	    exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "[$]0" ${1+"[$]@"}
+	  else
+	    # Oops.  We lost completely, so just stick with echo.
+	    ECHO=echo
+	  fi
+        fi
       fi
     fi
   fi
 fi
-fi
 
 # Copy echo and quote the copy suitably for passing to libtool from
 # the Makefile, instead of quoting the original, which is used later.
-ECHO=$echo
-if test "X$ECHO" = "X$CONFIG_SHELL [$]0 --fallback-echo"; then
-   ECHO="$CONFIG_SHELL \\\$\[$]0 --fallback-echo"
+lt_ECHO=$ECHO
+if test "X$lt_ECHO" = "X$CONFIG_SHELL [$]0 --fallback-echo"; then
+   lt_ECHO="$CONFIG_SHELL \\\$\[$]0 --fallback-echo"
 fi
 
-AC_SUBST(ECHO)
-])])# _LT_AC_PROG_ECHO_BACKSLASH
+AC_SUBST(lt_ECHO)
+])
+_LT_DECL([], [SHELL], [1], [Shell to use when invoking shell scripts])
+_LT_DECL([], [ECHO], [1],
+    [An echo program that does not interpret backslashes])
+])# _LT_PROG_ECHO_BACKSLASH
 
 
-# _LT_AC_LOCK
-# -----------
-AC_DEFUN([_LT_AC_LOCK],
+# _LT_ENABLE_LOCK
+# ---------------
+m4_defun([_LT_ENABLE_LOCK],
 [AC_ARG_ENABLE([libtool-lock],
-    [AC_HELP_STRING([--disable-libtool-lock],
-	[avoid locking (might break parallel builds)])])
+  [AS_HELP_STRING([--disable-libtool-lock],
+    [avoid locking (might break parallel builds)])])
 test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
 
 # Some flags need to be propagated to the compiler or linker for good
@@ -576,12 +1239,12 @@
   echo 'int i;' > conftest.$ac_ext
   if AC_TRY_EVAL(ac_compile); then
     case `/usr/bin/file conftest.$ac_objext` in
-    *ELF-32*)
-      HPUX_IA64_MODE="32"
-      ;;
-    *ELF-64*)
-      HPUX_IA64_MODE="64"
-      ;;
+      *ELF-32*)
+	HPUX_IA64_MODE="32"
+	;;
+      *ELF-64*)
+	HPUX_IA64_MODE="64"
+	;;
     esac
   fi
   rm -rf conftest*
@@ -590,79 +1253,79 @@
   # Find out which ABI we are using.
   echo '[#]line __oline__ "configure"' > conftest.$ac_ext
   if AC_TRY_EVAL(ac_compile); then
-   if test "$lt_cv_prog_gnu_ld" = yes; then
-    case `/usr/bin/file conftest.$ac_objext` in
-    *32-bit*)
-      LD="${LD-ld} -melf32bsmip"
-      ;;
-    *N32*)
-      LD="${LD-ld} -melf32bmipn32"
-      ;;
-    *64-bit*)
-      LD="${LD-ld} -melf64bmip"
-      ;;
-    esac
-   else
-    case `/usr/bin/file conftest.$ac_objext` in
-    *32-bit*)
-      LD="${LD-ld} -32"
-      ;;
-    *N32*)
-      LD="${LD-ld} -n32"
-      ;;
-    *64-bit*)
-      LD="${LD-ld} -64"
-      ;;
-    esac
-   fi
+    if test "$lt_cv_prog_gnu_ld" = yes; then
+      case `/usr/bin/file conftest.$ac_objext` in
+	*32-bit*)
+	  LD="${LD-ld} -melf32bsmip"
+	  ;;
+	*N32*)
+	  LD="${LD-ld} -melf32bmipn32"
+	  ;;
+	*64-bit*)
+	  LD="${LD-ld} -melf64bmip"
+	;;
+      esac
+    else
+      case `/usr/bin/file conftest.$ac_objext` in
+	*32-bit*)
+	  LD="${LD-ld} -32"
+	  ;;
+	*N32*)
+	  LD="${LD-ld} -n32"
+	  ;;
+	*64-bit*)
+	  LD="${LD-ld} -64"
+	  ;;
+      esac
+    fi
   fi
   rm -rf conftest*
   ;;
 
 x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \
-s390*-*linux*|sparc*-*linux*)
+s390*-*linux*|s390*-*tpf*|sparc*-*linux*)
   # Find out which ABI we are using.
   echo 'int i;' > conftest.$ac_ext
   if AC_TRY_EVAL(ac_compile); then
     case `/usr/bin/file conftest.o` in
-    *32-bit*)
-      case $host in
-        x86_64-*kfreebsd*-gnu)
-          LD="${LD-ld} -m elf_i386_fbsd"
-          ;;
-        x86_64-*linux*)
-          LD="${LD-ld} -m elf_i386"
-          ;;
-        ppc64-*linux*|powerpc64-*linux*)
-          LD="${LD-ld} -m elf32ppclinux"
-          ;;
-        s390x-*linux*)
-          LD="${LD-ld} -m elf_s390"
-          ;;
-        sparc64-*linux*)
-          LD="${LD-ld} -m elf32_sparc"
-          ;;
-      esac
-      ;;
-    *64-bit*)
-      case $host in
-        x86_64-*kfreebsd*-gnu)
-          LD="${LD-ld} -m elf_x86_64_fbsd"
-          ;;
-        x86_64-*linux*)
-          LD="${LD-ld} -m elf_x86_64"
-          ;;
-        ppc*-*linux*|powerpc*-*linux*)
-          LD="${LD-ld} -m elf64ppc"
-          ;;
-        s390*-*linux*)
-          LD="${LD-ld} -m elf64_s390"
-          ;;
-        sparc*-*linux*)
-          LD="${LD-ld} -m elf64_sparc"
-          ;;
-      esac
-      ;;
+      *32-bit*)
+	case $host in
+	  x86_64-*kfreebsd*-gnu)
+	    LD="${LD-ld} -m elf_i386_fbsd"
+	    ;;
+	  x86_64-*linux*)
+	    LD="${LD-ld} -m elf_i386"
+	    ;;
+	  ppc64-*linux*|powerpc64-*linux*)
+	    LD="${LD-ld} -m elf32ppclinux"
+	    ;;
+	  s390x-*linux*)
+	    LD="${LD-ld} -m elf_s390"
+	    ;;
+	  sparc64-*linux*)
+	    LD="${LD-ld} -m elf32_sparc"
+	    ;;
+	esac
+	;;
+      *64-bit*)
+	case $host in
+	  x86_64-*kfreebsd*-gnu)
+	    LD="${LD-ld} -m elf_x86_64_fbsd"
+	    ;;
+	  x86_64-*linux*)
+	    LD="${LD-ld} -m elf_x86_64"
+	    ;;
+	  ppc*-*linux*|powerpc*-*linux*)
+	    LD="${LD-ld} -m elf64ppc"
+	    ;;
+	  s390*-*linux*|s390*-*tpf*)
+	    LD="${LD-ld} -m elf64_s390"
+	    ;;
+	  sparc*-*linux*)
+	    LD="${LD-ld} -m elf64_sparc"
+	    ;;
+	esac
+	;;
     esac
   fi
   rm -rf conftest*
@@ -674,7 +1337,7 @@
   CFLAGS="$CFLAGS -belf"
   AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf,
     [AC_LANG_PUSH(C)
-     AC_TRY_LINK([],[],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])
+     AC_LINK_IFELSE([AC_LANG_PROGRAM([[]],[[]])],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])
      AC_LANG_POP])
   if test x"$lt_cv_cc_needs_belf" != x"yes"; then
     # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
@@ -690,7 +1353,7 @@
       case $lt_cv_prog_gnu_ld in
       yes*) LD="${LD-ld} -m elf64_sparc" ;;
       *)
-        if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then
+	if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then
 	  LD="${LD-ld} -64"
 	fi
 	;;
@@ -700,30 +1363,63 @@
   fi
   rm -rf conftest*
   ;;
-
-AC_PROVIDE_IFELSE([AC_LIBTOOL_WIN32_DLL],
-[*-*-cygwin* | *-*-mingw* | *-*-pw32*)
-  AC_CHECK_TOOL(DLLTOOL, dlltool, false)
-  AC_CHECK_TOOL(AS, as, false)
-  AC_CHECK_TOOL(OBJDUMP, objdump, false)
-  ;;
-  ])
 esac
 
 need_locks="$enable_libtool_lock"
+])# _LT_ENABLE_LOCK
+
+
+# _LT_CMD_OLD_ARCHIVE
+# -------------------
+m4_defun([_LT_CMD_OLD_ARCHIVE],
+[AC_CHECK_TOOL(AR, ar, false)
+test -z "$AR" && AR=ar
+test -z "$AR_FLAGS" && AR_FLAGS=cru
+_LT_DECL([], [AR], [1], [The archiver])
+_LT_DECL([], [AR_FLAGS], [1])
+
+AC_CHECK_TOOL(STRIP, strip, :)
+test -z "$STRIP" && STRIP=:
+_LT_DECL([], [STRIP], [1], [A symbol stripping program])
 
-])# _LT_AC_LOCK
+AC_CHECK_TOOL(RANLIB, ranlib, :)
+test -z "$RANLIB" && RANLIB=:
+_LT_DECL([], [RANLIB], [1],
+    [Commands used to install an old-style archive])
+
+# Determine commands to create old-style static archives.
+old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs'
+old_postinstall_cmds='chmod 644 $oldlib'
+old_postuninstall_cmds=
+
+if test -n "$RANLIB"; then
+  case $host_os in
+  openbsd*)
+    old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$oldlib"
+    ;;
+  *)
+    old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$oldlib"
+    ;;
+  esac
+  old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib"
+fi
+_LT_DECL([], [old_postinstall_cmds], [2])
+_LT_DECL([], [old_postuninstall_cmds], [2])
+_LT_TAGDECL([], [old_archive_cmds], [2],
+    [Commands used to build an old-style archive])
+])# _LT_CMD_OLD_ARCHIVE
 
 
-# AC_LIBTOOL_COMPILER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,
+# _LT_COMPILER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,
 #		[OUTPUT-FILE], [ACTION-SUCCESS], [ACTION-FAILURE])
 # ----------------------------------------------------------------
 # Check whether the given compiler option works
-AC_DEFUN([AC_LIBTOOL_COMPILER_OPTION],
-[AC_REQUIRE([LT_AC_PROG_SED])
+AC_DEFUN([_LT_COMPILER_OPTION],
+[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+m4_require([_LT_DECL_SED])dnl
 AC_CACHE_CHECK([$1], [$2],
   [$2=no
-  ifelse([$4], , [ac_outfile=conftest.$ac_objext], [ac_outfile=$4])
+   m4_if([$4], , [ac_outfile=conftest.$ac_objext], [ac_outfile=$4])
    echo "$lt_simple_compile_test_code" > conftest.$ac_ext
    lt_compiler_flag="$3"
    # Insert the option either (1) after the last *FLAGS variable, or
@@ -743,29 +1439,35 @@
    if (exit $ac_status) && test -s "$ac_outfile"; then
      # The compiler can only warn and ignore the option if not recognized
      # So say no if there are warnings other than the usual output.
-     $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
+     $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
      $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
      if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
        $2=yes
      fi
    fi
-   $rm conftest*
+   $RM conftest*
 ])
 
 if test x"[$]$2" = xyes; then
-    ifelse([$5], , :, [$5])
+    m4_if([$5], , :, [$5])
 else
-    ifelse([$6], , :, [$6])
+    m4_if([$6], , :, [$6])
 fi
-])# AC_LIBTOOL_COMPILER_OPTION
-
+])# _LT_COMPILER_OPTION
 
-# AC_LIBTOOL_LINKER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,
-#                          [ACTION-SUCCESS], [ACTION-FAILURE])
-# ------------------------------------------------------------
-# Check whether the given compiler option works
-AC_DEFUN([AC_LIBTOOL_LINKER_OPTION],
-[AC_REQUIRE([LT_AC_PROG_SED])dnl
+# Old name:
+AU_ALIAS([AC_LIBTOOL_COMPILER_OPTION], [_LT_COMPILER_OPTION])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LIBTOOL_COMPILER_OPTION], [])
+
+
+# _LT_LINKER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,
+#                  [ACTION-SUCCESS], [ACTION-FAILURE])
+# ----------------------------------------------------
+# Check whether the given linker option works
+AC_DEFUN([_LT_LINKER_OPTION],
+[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+m4_require([_LT_DECL_SED])dnl
 AC_CACHE_CHECK([$1], [$2],
   [$2=no
    save_LDFLAGS="$LDFLAGS"
@@ -777,7 +1479,7 @@
      if test -s conftest.err; then
        # Append any errors to the config.log.
        cat conftest.err 1>&AS_MESSAGE_LOG_FD
-       $echo "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp
+       $ECHO "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp
        $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
        if diff conftest.exp conftest.er2 >/dev/null; then
          $2=yes
@@ -786,22 +1488,28 @@
        $2=yes
      fi
    fi
-   $rm -r conftest*
+   $RM -r conftest*
    LDFLAGS="$save_LDFLAGS"
 ])
 
 if test x"[$]$2" = xyes; then
-    ifelse([$4], , :, [$4])
+    m4_if([$4], , :, [$4])
 else
-    ifelse([$5], , :, [$5])
+    m4_if([$5], , :, [$5])
 fi
-])# AC_LIBTOOL_LINKER_OPTION
+])# _LT_LINKER_OPTION
 
+# Old name:
+AU_ALIAS([AC_LIBTOOL_LINKER_OPTION], [_LT_LINKER_OPTION])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LIBTOOL_LINKER_OPTION], [])
 
-# AC_LIBTOOL_SYS_MAX_CMD_LEN
-# --------------------------
-AC_DEFUN([AC_LIBTOOL_SYS_MAX_CMD_LEN],
-[# find the maximum length of command line arguments
+
+# LT_CMD_MAX_LEN
+#---------------
+AC_DEFUN([LT_CMD_MAX_LEN],
+[AC_REQUIRE([AC_CANONICAL_HOST])dnl
+# find the maximum length of command line arguments
 AC_MSG_CHECKING([the maximum length of command line arguments])
 AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl
   i=0
@@ -823,7 +1531,7 @@
     lt_cv_sys_max_cmd_len=-1;
     ;;
 
-  cygwin* | mingw*)
+  cygwin* | mingw* | cegcc*)
     # On Win9x/ME, this test blows up -- it succeeds, but takes
     # about 5 minutes as the teststring grows exponentially.
     # Worse, since 9x/ME are not pre-emptively multitasking,
@@ -878,7 +1586,7 @@
   sysv5* | sco5v6* | sysv4.2uw2*)
     kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null`
     if test -n "$kargmax"; then
-      lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[[ 	]]//'`
+      lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[[	 ]]//'`
     else
       lt_cv_sys_max_cmd_len=32768
     fi
@@ -889,20 +1597,28 @@
       lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
       lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
     else
+      # Make teststring a little bigger before we do anything with it.
+      # a 1K string should be a reasonable start.
+      for i in 1 2 3 4 5 6 7 8 ; do
+        teststring=$teststring$teststring
+      done
       SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}}
-      while (test "X"`$SHELL [$]0 --fallback-echo "X$teststring" 2>/dev/null` \
-	       = "XX$teststring") >/dev/null 2>&1 &&
-	      new_result=`expr "X$teststring" : ".*" 2>&1` &&
-	      lt_cv_sys_max_cmd_len=$new_result &&
+      # If test is not a shell built-in, we'll probably end up computing a
+      # maximum length that is only half of the actual maximum length, but
+      # we can't tell.
+      while { test "X"`$SHELL [$]0 --fallback-echo "X$teststring$teststring" 2>/dev/null` \
+	         = "XX$teststring$teststring"; } >/dev/null 2>&1 &&
 	      test $i != 17 # 1/2 MB should be enough
       do
         i=`expr $i + 1`
         teststring=$teststring$teststring
       done
+      # Only check the string length outside the loop.
+      lt_cv_sys_max_cmd_len=`expr "X$teststring" : ".*" 2>&1`
       teststring=
-      # Add a significant safety factor because C++ compilers can tack on massive
-      # amounts of additional arguments before passing them to the linker.
-      # It appears as though 1/2 is a usable value.
+      # Add a significant safety factor because C++ compilers can tack on
+      # massive amounts of additional arguments before passing them to the
+      # linker.  It appears as though 1/2 is a usable value.
       lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2`
     fi
     ;;
@@ -913,27 +1629,35 @@
 else
   AC_MSG_RESULT(none)
 fi
-])# AC_LIBTOOL_SYS_MAX_CMD_LEN
+max_cmd_len=$lt_cv_sys_max_cmd_len
+_LT_DECL([], [max_cmd_len], [0],
+    [What is the maximum length of a command?])
+])# LT_CMD_MAX_LEN
 
+# Old name:
+AU_ALIAS([AC_LIBTOOL_SYS_MAX_CMD_LEN], [LT_CMD_MAX_LEN])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LIBTOOL_SYS_MAX_CMD_LEN], [])
 
-# _LT_AC_CHECK_DLFCN
-# ------------------
-AC_DEFUN([_LT_AC_CHECK_DLFCN],
-[AC_CHECK_HEADERS(dlfcn.h)dnl
-])# _LT_AC_CHECK_DLFCN
+
+# _LT_HEADER_DLFCN
+# ----------------
+m4_defun([_LT_HEADER_DLFCN],
+[AC_CHECK_HEADERS([dlfcn.h], [], [], [AC_INCLUDES_DEFAULT])dnl
+])# _LT_HEADER_DLFCN
 
 
-# _LT_AC_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE,
-#                           ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING)
-# ---------------------------------------------------------------------
-AC_DEFUN([_LT_AC_TRY_DLOPEN_SELF],
-[AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl
+# _LT_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE,
+#                      ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING)
+# ----------------------------------------------------------------
+m4_defun([_LT_TRY_DLOPEN_SELF],
+[m4_require([_LT_HEADER_DLFCN])dnl
 if test "$cross_compiling" = yes; then :
   [$4]
 else
   lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
   lt_status=$lt_dlunknown
-  cat > conftest.$ac_ext <<EOF
+  cat > conftest.$ac_ext <<_LT_EOF
 [#line __oline__ "configure"
 #include "confdefs.h"
 
@@ -975,10 +1699,6 @@
 #  endif
 #endif
 
-#ifdef __cplusplus
-extern "C" void exit (int);
-#endif
-
 void fnord() { int i=42;}
 int main ()
 {
@@ -994,9 +1714,9 @@
   else
     puts (dlerror ());
 
-    exit (status);
+  return status;
 }]
-EOF
+_LT_EOF
   if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext} 2>/dev/null; then
     (./conftest; exit; ) >&AS_MESSAGE_LOG_FD 2>/dev/null
     lt_status=$?
@@ -1011,13 +1731,13 @@
   fi
 fi
 rm -fr conftest*
-])# _LT_AC_TRY_DLOPEN_SELF
+])# _LT_TRY_DLOPEN_SELF
 
 
-# AC_LIBTOOL_DLOPEN_SELF
-# ----------------------
-AC_DEFUN([AC_LIBTOOL_DLOPEN_SELF],
-[AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl
+# LT_SYS_DLOPEN_SELF
+# ------------------
+AC_DEFUN([LT_SYS_DLOPEN_SELF],
+[m4_require([_LT_HEADER_DLFCN])dnl
 if test "x$enable_dlopen" != xyes; then
   enable_dlopen=unknown
   enable_dlopen_self=unknown
@@ -1033,15 +1753,15 @@
     lt_cv_dlopen_self=yes
     ;;
 
-  mingw* | pw32*)
+  mingw* | pw32* | cegcc*)
     lt_cv_dlopen="LoadLibrary"
     lt_cv_dlopen_libs=
-   ;;
+    ;;
 
   cygwin*)
     lt_cv_dlopen="dlopen"
     lt_cv_dlopen_libs=
-   ;;
+    ;;
 
   darwin*)
   # if libdl is installed we need to link against it
@@ -1051,7 +1771,7 @@
     lt_cv_dlopen_libs=
     lt_cv_dlopen_self=yes
     ])
-   ;;
+    ;;
 
   *)
     AC_CHECK_FUNC([shl_load],
@@ -1093,7 +1813,7 @@
 
     AC_CACHE_CHECK([whether a program can dlopen itself],
 	  lt_cv_dlopen_self, [dnl
-	  _LT_AC_TRY_DLOPEN_SELF(
+	  _LT_TRY_DLOPEN_SELF(
 	    lt_cv_dlopen_self=yes, lt_cv_dlopen_self=yes,
 	    lt_cv_dlopen_self=no, lt_cv_dlopen_self=cross)
     ])
@@ -1101,8 +1821,8 @@
     if test "x$lt_cv_dlopen_self" = xyes; then
       wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\"
       AC_CACHE_CHECK([whether a statically linked program can dlopen itself],
-    	  lt_cv_dlopen_self_static, [dnl
-	  _LT_AC_TRY_DLOPEN_SELF(
+	  lt_cv_dlopen_self_static, [dnl
+	  _LT_TRY_DLOPEN_SELF(
 	    lt_cv_dlopen_self_static=yes, lt_cv_dlopen_self_static=yes,
 	    lt_cv_dlopen_self_static=no,  lt_cv_dlopen_self_static=cross)
       ])
@@ -1124,19 +1844,32 @@
   *) enable_dlopen_self_static=unknown ;;
   esac
 fi
-])# AC_LIBTOOL_DLOPEN_SELF
+_LT_DECL([dlopen_support], [enable_dlopen], [0],
+	 [Whether dlopen is supported])
+_LT_DECL([dlopen_self], [enable_dlopen_self], [0],
+	 [Whether dlopen of programs is supported])
+_LT_DECL([dlopen_self_static], [enable_dlopen_self_static], [0],
+	 [Whether dlopen of statically linked programs is supported])
+])# LT_SYS_DLOPEN_SELF
+
+# Old name:
+AU_ALIAS([AC_LIBTOOL_DLOPEN_SELF], [LT_SYS_DLOPEN_SELF])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LIBTOOL_DLOPEN_SELF], [])
 
 
-# AC_LIBTOOL_PROG_CC_C_O([TAGNAME])
-# ---------------------------------
-# Check to see if options -c and -o are simultaneously supported by compiler
-AC_DEFUN([AC_LIBTOOL_PROG_CC_C_O],
-[AC_REQUIRE([LT_AC_PROG_SED])dnl
-AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl
+# _LT_COMPILER_C_O([TAGNAME])
+# ---------------------------
+# Check to see if options -c and -o are simultaneously supported by compiler.
+# This macro does not hard code the compiler like AC_PROG_CC_C_O.
+m4_defun([_LT_COMPILER_C_O],
+[m4_require([_LT_DECL_SED])dnl
+m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+m4_require([_LT_TAG_COMPILER])dnl
 AC_CACHE_CHECK([if $compiler supports -c -o file.$ac_objext],
-  [_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)],
-  [_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=no
-   $rm -r conftest 2>/dev/null
+  [_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)],
+  [_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=no
+   $RM -r conftest 2>/dev/null
    mkdir conftest
    cd conftest
    mkdir out
@@ -1160,37 +1893,41 @@
    then
      # The compiler can only warn and ignore the option if not recognized
      # So say no if there are warnings
-     $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
+     $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
      $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
      if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
-       _LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
+       _LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
      fi
    fi
    chmod u+w . 2>&AS_MESSAGE_LOG_FD
-   $rm conftest*
+   $RM conftest*
    # SGI C++ compiler will create directory out/ii_files/ for
    # template instantiation
-   test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files
-   $rm out/* && rmdir out
+   test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files
+   $RM out/* && rmdir out
    cd ..
-   rmdir conftest
-   $rm conftest*
+   $RM -r conftest
+   $RM conftest*
 ])
-])# AC_LIBTOOL_PROG_CC_C_O
+_LT_TAGDECL([compiler_c_o], [lt_cv_prog_compiler_c_o], [1],
+	[Does compiler simultaneously support -c and -o options?])
+])# _LT_COMPILER_C_O
 
 
-# AC_LIBTOOL_SYS_HARD_LINK_LOCKS([TAGNAME])
-# -----------------------------------------
+# _LT_COMPILER_FILE_LOCKS([TAGNAME])
+# ----------------------------------
 # Check to see if we can do hard links to lock some files if needed
-AC_DEFUN([AC_LIBTOOL_SYS_HARD_LINK_LOCKS],
-[AC_REQUIRE([_LT_AC_LOCK])dnl
+m4_defun([_LT_COMPILER_FILE_LOCKS],
+[m4_require([_LT_ENABLE_LOCK])dnl
+m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+_LT_COMPILER_C_O([$1])
 
 hard_links="nottested"
-if test "$_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)" = no && test "$need_locks" != no; then
+if test "$_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)" = no && test "$need_locks" != no; then
   # do not overwrite the value of need_locks provided by the user
   AC_MSG_CHECKING([if we can lock with hard links])
   hard_links=yes
-  $rm conftest*
+  $RM conftest*
   ln conftest.a conftest.b 2>/dev/null && hard_links=no
   touch conftest.a
   ln conftest.a conftest.b 2>&5 || hard_links=no
@@ -1203,12 +1940,13 @@
 else
   need_locks=no
 fi
-])# AC_LIBTOOL_SYS_HARD_LINK_LOCKS
+_LT_DECL([], [need_locks], [1], [Must we lock files when doing compilation?])
+])# _LT_COMPILER_FILE_LOCKS
 
 
-# AC_LIBTOOL_OBJDIR
-# -----------------
-AC_DEFUN([AC_LIBTOOL_OBJDIR],
+# _LT_CHECK_OBJDIR
+# ----------------
+m4_defun([_LT_CHECK_OBJDIR],
 [AC_CACHE_CHECK([for objdir], [lt_cv_objdir],
 [rm -f .libs 2>/dev/null
 mkdir .libs 2>/dev/null
@@ -1220,40 +1958,46 @@
 fi
 rmdir .libs 2>/dev/null])
 objdir=$lt_cv_objdir
-])# AC_LIBTOOL_OBJDIR
+_LT_DECL([], [objdir], [0],
+         [The name of the directory that contains temporary libtool files])dnl
+m4_pattern_allow([LT_OBJDIR])dnl
+AC_DEFINE_UNQUOTED(LT_OBJDIR, "$lt_cv_objdir/",
+  [Define to the sub-directory in which libtool stores uninstalled libraries.])
+])# _LT_CHECK_OBJDIR
 
 
-# AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH([TAGNAME])
-# ----------------------------------------------
+# _LT_LINKER_HARDCODE_LIBPATH([TAGNAME])
+# --------------------------------------
 # Check hardcoding attributes.
-AC_DEFUN([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH],
+m4_defun([_LT_LINKER_HARDCODE_LIBPATH],
 [AC_MSG_CHECKING([how to hardcode library paths into programs])
-_LT_AC_TAGVAR(hardcode_action, $1)=
-if test -n "$_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)" || \
-   test -n "$_LT_AC_TAGVAR(runpath_var, $1)" || \
-   test "X$_LT_AC_TAGVAR(hardcode_automatic, $1)" = "Xyes" ; then
+_LT_TAGVAR(hardcode_action, $1)=
+if test -n "$_LT_TAGVAR(hardcode_libdir_flag_spec, $1)" ||
+   test -n "$_LT_TAGVAR(runpath_var, $1)" ||
+   test "X$_LT_TAGVAR(hardcode_automatic, $1)" = "Xyes" ; then
 
-  # We can hardcode non-existant directories.
-  if test "$_LT_AC_TAGVAR(hardcode_direct, $1)" != no &&
+  # We can hardcode non-existent directories.
+  if test "$_LT_TAGVAR(hardcode_direct, $1)" != no &&
      # If the only mechanism to avoid hardcoding is shlibpath_var, we
      # have to relink, otherwise we might link with an installed library
      # when we should be linking with a yet-to-be-installed one
-     ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)" != no &&
-     test "$_LT_AC_TAGVAR(hardcode_minus_L, $1)" != no; then
+     ## test "$_LT_TAGVAR(hardcode_shlibpath_var, $1)" != no &&
+     test "$_LT_TAGVAR(hardcode_minus_L, $1)" != no; then
     # Linking always hardcodes the temporary library directory.
-    _LT_AC_TAGVAR(hardcode_action, $1)=relink
+    _LT_TAGVAR(hardcode_action, $1)=relink
   else
     # We can link without hardcoding, and we can hardcode nonexisting dirs.
-    _LT_AC_TAGVAR(hardcode_action, $1)=immediate
+    _LT_TAGVAR(hardcode_action, $1)=immediate
   fi
 else
   # We cannot hardcode anything, or else we can only hardcode existing
   # directories.
-  _LT_AC_TAGVAR(hardcode_action, $1)=unsupported
+  _LT_TAGVAR(hardcode_action, $1)=unsupported
 fi
-AC_MSG_RESULT([$_LT_AC_TAGVAR(hardcode_action, $1)])
+AC_MSG_RESULT([$_LT_TAGVAR(hardcode_action, $1)])
 
-if test "$_LT_AC_TAGVAR(hardcode_action, $1)" = relink; then
+if test "$_LT_TAGVAR(hardcode_action, $1)" = relink ||
+   test "$_LT_TAGVAR(inherit_rpath, $1)" = yes; then
   # Fast installation is not supported
   enable_fast_install=no
 elif test "$shlibpath_overrides_runpath" = yes ||
@@ -1261,73 +2005,70 @@
   # Fast installation is not necessary
   enable_fast_install=needless
 fi
-])# AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH
+_LT_TAGDECL([], [hardcode_action], [0],
+    [How to hardcode a shared library path into an executable])
+])# _LT_LINKER_HARDCODE_LIBPATH
 
 
-# AC_LIBTOOL_SYS_LIB_STRIP
-# ------------------------
-AC_DEFUN([AC_LIBTOOL_SYS_LIB_STRIP],
-[striplib=
+# _LT_CMD_STRIPLIB
+# ----------------
+m4_defun([_LT_CMD_STRIPLIB],
+[m4_require([_LT_DECL_EGREP])
+striplib=
 old_striplib=
 AC_MSG_CHECKING([whether stripping libraries is possible])
-if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then
+if test -n "$STRIP" && $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then
   test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
   test -z "$striplib" && striplib="$STRIP --strip-unneeded"
   AC_MSG_RESULT([yes])
 else
 # FIXME - insert some real tests, host_os isn't really good enough
   case $host_os in
-   darwin*)
-       if test -n "$STRIP" ; then
-         striplib="$STRIP -x"
-         old_striplib="$STRIP -S"
-         AC_MSG_RESULT([yes])
-       else
-  AC_MSG_RESULT([no])
-fi
-       ;;
-   *)
-  AC_MSG_RESULT([no])
+  darwin*)
+    if test -n "$STRIP" ; then
+      striplib="$STRIP -x"
+      old_striplib="$STRIP -S"
+      AC_MSG_RESULT([yes])
+    else
+      AC_MSG_RESULT([no])
+    fi
+    ;;
+  *)
+    AC_MSG_RESULT([no])
     ;;
   esac
 fi
-])# AC_LIBTOOL_SYS_LIB_STRIP
+_LT_DECL([], [old_striplib], [1], [Commands to strip libraries])
+_LT_DECL([], [striplib], [1])
+])# _LT_CMD_STRIPLIB
 
 
-# AC_LIBTOOL_SYS_DYNAMIC_LINKER
+# _LT_SYS_DYNAMIC_LINKER([TAG])
 # -----------------------------
 # PORTME Fill in your ld.so characteristics
-AC_DEFUN([AC_LIBTOOL_SYS_DYNAMIC_LINKER],
-[AC_REQUIRE([LT_AC_PROG_SED])dnl
+m4_defun([_LT_SYS_DYNAMIC_LINKER],
+[AC_REQUIRE([AC_CANONICAL_HOST])dnl
+m4_require([_LT_DECL_EGREP])dnl
+m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+m4_require([_LT_DECL_OBJDUMP])dnl
+m4_require([_LT_DECL_SED])dnl
 AC_MSG_CHECKING([dynamic linker characteristics])
-library_names_spec=
-libname_spec='lib$name'
-soname_spec=
-shrext_cmds=".so"
-postinstall_cmds=
-postuninstall_cmds=
-finish_cmds=
-finish_eval=
-shlibpath_var=
-shlibpath_overrides_runpath=unknown
-version_type=none
-dynamic_linker="$host_os ld.so"
-sys_lib_dlsearch_path_spec="/lib /usr/lib"
-m4_if($1,[],[
+m4_if([$1],
+	[], [
 if test "$GCC" = yes; then
   case $host_os in
     darwin*) lt_awk_arg="/^libraries:/,/LR/" ;;
     *) lt_awk_arg="/^libraries:/" ;;
   esac
   lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e "s,=/,/,g"`
-  if echo "$lt_search_path_spec" | grep ';' >/dev/null ; then
+  if $ECHO "$lt_search_path_spec" | $GREP ';' >/dev/null ; then
     # if the path contains ";" then we assume it to be the separator
     # otherwise default to the standard path separator (i.e. ":") - it is
     # assumed that no part of a normal pathname contains ";" but that should
     # okay in the real world where ";" in dirpaths is itself problematic.
-    lt_search_path_spec=`echo "$lt_search_path_spec" | $SED -e 's/;/ /g'`
+    lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED -e 's/;/ /g'`
   else
-    lt_search_path_spec=`echo "$lt_search_path_spec" | $SED  -e "s/$PATH_SEPARATOR/ /g"`
+    lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED  -e "s/$PATH_SEPARATOR/ /g"`
   fi
   # Ok, now we have the path, separated by spaces, we can step through it
   # and add multilib dir if necessary.
@@ -1341,7 +2082,7 @@
 	lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path"
     fi
   done
-  lt_search_path_spec=`echo $lt_tmp_lt_search_path_spec | awk '
+  lt_search_path_spec=`$ECHO $lt_tmp_lt_search_path_spec | awk '
 BEGIN {RS=" "; FS="/|\n";} {
   lt_foo="";
   lt_count=0;
@@ -1361,10 +2102,23 @@
   if (lt_foo != "") { lt_freq[[lt_foo]]++; }
   if (lt_freq[[lt_foo]] == 1) { print lt_foo; }
 }'`
-  sys_lib_search_path_spec=`echo $lt_search_path_spec`
+  sys_lib_search_path_spec=`$ECHO $lt_search_path_spec`
 else
   sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
 fi])
+library_names_spec=
+libname_spec='lib$name'
+soname_spec=
+shrext_cmds=".so"
+postinstall_cmds=
+postuninstall_cmds=
+finish_cmds=
+finish_eval=
+shlibpath_var=
+shlibpath_overrides_runpath=unknown
+version_type=none
+dynamic_linker="$host_os ld.so"
+sys_lib_dlsearch_path_spec="/lib /usr/lib"
 need_lib_prefix=unknown
 hardcode_into_libs=no
 
@@ -1401,7 +2155,7 @@
       aix4 | aix4.[[01]] | aix4.[[01]].*)
       if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
 	   echo ' yes '
-	   echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then
+	   echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then
 	:
       else
 	can_build_shared=no
@@ -1427,9 +2181,18 @@
   ;;
 
 amigaos*)
-  library_names_spec='$libname.ixlibrary $libname.a'
-  # Create ${libname}_ixlibrary.a entries in /sys/libs.
-  finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
+  case $host_cpu in
+  powerpc)
+    # Since July 2007 AmigaOS4 officially supports .so libraries.
+    # When compiling the executable, add -use-dynld -Lsobjs: to the compileline.
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    ;;
+  m68k)
+    library_names_spec='$libname.ixlibrary $libname.a'
+    # Create ${libname}_ixlibrary.a entries in /sys/libs.
+    finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$ECHO "X$lib" | $Xsed -e '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
+    ;;
+  esac
   ;;
 
 beos*)
@@ -1452,25 +2215,28 @@
   # libtool to hard-code these into programs
   ;;
 
-cygwin* | mingw* | pw32*)
+cygwin* | mingw* | pw32* | cegcc*)
   version_type=windows
   shrext_cmds=".dll"
   need_version=no
   need_lib_prefix=no
 
   case $GCC,$host_os in
-  yes,cygwin* | yes,mingw* | yes,pw32*)
+  yes,cygwin* | yes,mingw* | yes,pw32* | yes,cegcc*)
     library_names_spec='$libname.dll.a'
     # DLL is installed to $(libdir)/../bin by postinstall_cmds
     postinstall_cmds='base_file=`basename \${file}`~
-      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~
+      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
       dldir=$destdir/`dirname \$dlpath`~
       test -d \$dldir || mkdir -p \$dldir~
       $install_prog $dir/$dlname \$dldir/$dlname~
-      chmod a+x \$dldir/$dlname'
+      chmod a+x \$dldir/$dlname~
+      if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then
+        eval '\''$striplib \$dldir/$dlname'\'' || exit \$?;
+      fi'
     postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
       dlpath=$dir/\$dldll~
-       $rm \$dlpath'
+       $RM \$dlpath'
     shlibpath_overrides_runpath=yes
 
     case $host_os in
@@ -1479,20 +2245,20 @@
       soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
       sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib"
       ;;
-    mingw*)
+    mingw* | cegcc*)
       # MinGW DLLs use traditional 'lib' prefix
       soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
-      sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
-      if echo "$sys_lib_search_path_spec" | [grep ';[c-zC-Z]:/' >/dev/null]; then
+      sys_lib_search_path_spec=`$CC -print-search-dirs | $GREP "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
+      if $ECHO "$sys_lib_search_path_spec" | [$GREP ';[c-zC-Z]:/' >/dev/null]; then
         # It is most probably a Windows format PATH printed by
         # mingw gcc, but we are running on Cygwin. Gcc prints its search
         # path with ; separators, and with drive letters. We can handle the
         # drive letters (cygwin fileutils understands them), so leave them,
         # especially as we might pass files found there to a mingw objdump,
         # which wouldn't understand a cygwinified path. Ahh.
-        sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
+        sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
       else
-        sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED  -e "s/$PATH_SEPARATOR/ /g"`
+        sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED  -e "s/$PATH_SEPARATOR/ /g"`
       fi
       ;;
     pw32*)
@@ -1516,13 +2282,13 @@
   version_type=darwin
   need_lib_prefix=no
   need_version=no
-  library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext'
+  library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext'
   soname_spec='${libname}${release}${major}$shared_ext'
   shlibpath_overrides_runpath=yes
   shlibpath_var=DYLD_LIBRARY_PATH
   shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
-  m4_if([$1], [],[
-  sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib"]) 
+m4_if([$1], [],[
+  sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib"])
   sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
   ;;
 
@@ -1615,18 +2381,18 @@
     fi
     sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
     ;;
-   hppa*64*)
-     shrext_cmds='.sl'
-     hardcode_into_libs=yes
-     dynamic_linker="$host_os dld.sl"
-     shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
-     shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
-     library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-     soname_spec='${libname}${release}${shared_ext}$major'
-     sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
-     sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
-     ;;
-   *)
+  hppa*64*)
+    shrext_cmds='.sl'
+    hardcode_into_libs=yes
+    dynamic_linker="$host_os dld.sl"
+    shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
+    shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+    soname_spec='${libname}${release}${shared_ext}$major'
+    sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
+    sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+    ;;
+  *)
     shrext_cmds='.sl'
     dynamic_linker="$host_os dld.sl"
     shlibpath_var=SHLIB_PATH
@@ -1703,33 +2469,26 @@
   finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
   shlibpath_var=LD_LIBRARY_PATH
   shlibpath_overrides_runpath=no
+  # Some binutils ld are patched to set DT_RUNPATH
+  save_LDFLAGS=$LDFLAGS
+  save_libdir=$libdir
+  eval "libdir=/foo; wl=\"$_LT_TAGVAR(lt_prog_compiler_wl, $1)\"; \
+       LDFLAGS=\"\$LDFLAGS $_LT_TAGVAR(hardcode_libdir_flag_spec, $1)\""
+  AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])],
+    [AS_IF([ ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null],
+       [shlibpath_overrides_runpath=yes])])
+  LDFLAGS=$save_LDFLAGS
+  libdir=$save_libdir
+
   # This implies no fast_install, which is unacceptable.
   # Some rework will be needed to allow for fast_install
   # before this can be enabled.
   hardcode_into_libs=yes
 
-  # find out which ABI we are using
-  libsuff=
-  case "$host_cpu" in
-  x86_64*|s390x*|powerpc64*)
-    echo '[#]line __oline__ "configure"' > conftest.$ac_ext
-    if AC_TRY_EVAL(ac_compile); then
-      case `/usr/bin/file conftest.$ac_objext` in
-      *64-bit*)
-        libsuff=64
-        ;;
-      esac
-    fi
-    rm -rf conftest*
-    ;;
-  esac
-
-  sys_lib_dlsearch_path_spec="/lib${libsuff} /usr/lib${libsuff}"
-
   # Append ld.so.conf contents to the search path
   if test -f /etc/ld.so.conf; then
-    lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ 	]*hwcap[ 	]/d;s/[:,	]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
-    sys_lib_dlsearch_path_spec="$sys_lib_dlsearch_path_spec $lt_ld_extra"
+    lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[	 ]*hwcap[	 ]/d;s/[:,	]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
+    sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
   fi
 
   # We used to test for /lib/ld.so.1 and disable shared libraries on
@@ -1741,11 +2500,23 @@
   dynamic_linker='GNU/Linux ld.so'
   ;;
 
+netbsdelf*-gnu)
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+  soname_spec='${libname}${release}${shared_ext}$major'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  dynamic_linker='NetBSD ld.elf_so'
+  ;;
+
 netbsd*)
   version_type=sunos
   need_lib_prefix=no
   need_version=no
-  if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
+  if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
     library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
     finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
     dynamic_linker='NetBSD (a.out) ld.so'
@@ -1766,14 +2537,16 @@
   shlibpath_overrides_runpath=yes
   ;;
 
-nto-qnx*)
-  version_type=linux
+*nto* | *qnx*)
+  version_type=qnx
   need_lib_prefix=no
   need_version=no
   library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
   soname_spec='${libname}${release}${shared_ext}$major'
   shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  dynamic_linker='ldqnx.so'
   ;;
 
 openbsd*)
@@ -1782,13 +2555,13 @@
   need_lib_prefix=no
   # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
   case $host_os in
-    openbsd3.3 | openbsd3.3.*) need_version=yes ;;
-    *)                         need_version=no  ;;
+    openbsd3.3 | openbsd3.3.*)	need_version=yes ;;
+    *)				need_version=no  ;;
   esac
   library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
   finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
   shlibpath_var=LD_LIBRARY_PATH
-  if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+  if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
     case $host_os in
       openbsd2.[[89]] | openbsd2.[[89]].*)
 	shlibpath_overrides_runpath=no
@@ -1860,7 +2633,6 @@
     sni)
       shlibpath_overrides_runpath=no
       need_lib_prefix=no
-      export_dynamic_flag_spec='${wl}-Blargedynsym'
       runpath_var=LD_RUN_PATH
       ;;
     siemens)
@@ -1891,13 +2663,12 @@
   library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
   soname_spec='${libname}${release}${shared_ext}$major'
   shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=yes
   hardcode_into_libs=yes
   if test "$with_gnu_ld" = yes; then
     sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
-    shlibpath_overrides_runpath=no
   else
     sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
-    shlibpath_overrides_runpath=yes
     case $host_os in
       sco3.2v5*)
         sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
@@ -1907,7 +2678,18 @@
   sys_lib_dlsearch_path_spec='/usr/lib'
   ;;
 
-uts4*)
+tpf*)
+  # TPF is a cross-target only.  Preferred cross-host = GNU/Linux.
+  version_type=linux
+  need_lib_prefix=no
+  need_version=no
+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+  shlibpath_var=LD_LIBRARY_PATH
+  shlibpath_overrides_runpath=no
+  hardcode_into_libs=yes
+  ;;
+
+uts4*)
   version_type=linux
   library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
   soname_spec='${libname}${release}${shared_ext}$major'
@@ -1921,288 +2703,58 @@
 AC_MSG_RESULT([$dynamic_linker])
 test "$dynamic_linker" = no && can_build_shared=no
 
-AC_CACHE_VAL([lt_cv_sys_lib_search_path_spec],
-[lt_cv_sys_lib_search_path_spec="$sys_lib_search_path_spec"])
-sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec"
-AC_CACHE_VAL([lt_cv_sys_lib_dlsearch_path_spec],
-[lt_cv_sys_lib_dlsearch_path_spec="$sys_lib_dlsearch_path_spec"])
-sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec"
-
 variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
 if test "$GCC" = yes; then
   variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
 fi
-])# AC_LIBTOOL_SYS_DYNAMIC_LINKER
-
-
-# _LT_AC_TAGCONFIG
-# ----------------
-AC_DEFUN([_LT_AC_TAGCONFIG],
-[AC_REQUIRE([LT_AC_PROG_SED])dnl
-AC_ARG_WITH([tags],
-    [AC_HELP_STRING([--with-tags@<:@=TAGS@:>@],
-        [include additional configurations @<:@automatic@:>@])],
-    [tagnames="$withval"])
-
-if test -f "$ltmain" && test -n "$tagnames"; then
-  if test ! -f "${ofile}"; then
-    AC_MSG_WARN([output file `$ofile' does not exist])
-  fi
-
-  if test -z "$LTCC"; then
-    eval "`$SHELL ${ofile} --config | grep '^LTCC='`"
-    if test -z "$LTCC"; then
-      AC_MSG_WARN([output file `$ofile' does not look like a libtool script])
-    else
-      AC_MSG_WARN([using `LTCC=$LTCC', extracted from `$ofile'])
-    fi
-  fi
-  if test -z "$LTCFLAGS"; then
-    eval "`$SHELL ${ofile} --config | grep '^LTCFLAGS='`"
-  fi
-
-  # Extract list of available tagged configurations in $ofile.
-  # Note that this assumes the entire list is on one line.
-  available_tags=`grep "^available_tags=" "${ofile}" | $SED -e 's/available_tags=\(.*$\)/\1/' -e 's/\"//g'`
-
-  lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
-  for tagname in $tagnames; do
-    IFS="$lt_save_ifs"
-    # Check whether tagname contains only valid characters
-    case `$echo "X$tagname" | $Xsed -e 's:[[-_ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz1234567890,/]]::g'` in
-    "") ;;
-    *)  AC_MSG_ERROR([invalid tag name: $tagname])
-	;;
-    esac
-
-    if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "${ofile}" > /dev/null
-    then
-      AC_MSG_ERROR([tag name \"$tagname\" already exists])
-    fi
-
-    # Update the list of available tags.
-    if test -n "$tagname"; then
-      echo appending configuration tag \"$tagname\" to $ofile
-
-      case $tagname in
-      CXX)
-	if test -n "$CXX" && ( test "X$CXX" != "Xno" &&
-	    ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) ||
-	    (test "X$CXX" != "Xg++"))) ; then
-	  AC_LIBTOOL_LANG_CXX_CONFIG
-	else
-	  tagname=""
-	fi
-	;;
-
-      F77)
-	if test -n "$F77" && test "X$F77" != "Xno"; then
-	  AC_LIBTOOL_LANG_F77_CONFIG
-	else
-	  tagname=""
-	fi
-	;;
-
-      GCJ)
-	if test -n "$GCJ" && test "X$GCJ" != "Xno"; then
-	  AC_LIBTOOL_LANG_GCJ_CONFIG
-	else
-	  tagname=""
-	fi
-	;;
-
-      RC)
-	AC_LIBTOOL_LANG_RC_CONFIG
-	;;
-
-      *)
-	AC_MSG_ERROR([Unsupported tag name: $tagname])
-	;;
-      esac
-
-      # Append the new tag name to the list of available tags.
-      if test -n "$tagname" ; then
-      available_tags="$available_tags $tagname"
-    fi
-    fi
-  done
-  IFS="$lt_save_ifs"
 
-  # Now substitute the updated list of available tags.
-  if eval "sed -e 's/^available_tags=.*\$/available_tags=\"$available_tags\"/' \"$ofile\" > \"${ofile}T\""; then
-    mv "${ofile}T" "$ofile"
-    chmod +x "$ofile"
-  else
-    rm -f "${ofile}T"
-    AC_MSG_ERROR([unable to update list of available tagged configurations.])
-  fi
+if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then
+  sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec"
+fi
+if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then
+  sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec"
 fi
-])# _LT_AC_TAGCONFIG
-
-
-# AC_LIBTOOL_DLOPEN
-# -----------------
-# enable checks for dlopen support
-AC_DEFUN([AC_LIBTOOL_DLOPEN],
- [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])
-])# AC_LIBTOOL_DLOPEN
-
-
-# AC_LIBTOOL_WIN32_DLL
-# --------------------
-# declare package support for building win32 DLLs
-AC_DEFUN([AC_LIBTOOL_WIN32_DLL],
-[AC_BEFORE([$0], [AC_LIBTOOL_SETUP])
-])# AC_LIBTOOL_WIN32_DLL
-
-
-# AC_ENABLE_SHARED([DEFAULT])
-# ---------------------------
-# implement the --enable-shared flag
-# DEFAULT is either `yes' or `no'.  If omitted, it defaults to `yes'.
-AC_DEFUN([AC_ENABLE_SHARED],
-[define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl
-AC_ARG_ENABLE([shared],
-    [AC_HELP_STRING([--enable-shared@<:@=PKGS@:>@],
-	[build shared libraries @<:@default=]AC_ENABLE_SHARED_DEFAULT[@:>@])],
-    [p=${PACKAGE-default}
-    case $enableval in
-    yes) enable_shared=yes ;;
-    no) enable_shared=no ;;
-    *)
-      enable_shared=no
-      # Look at the argument we got.  We use all the common list separators.
-      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
-      for pkg in $enableval; do
-	IFS="$lt_save_ifs"
-	if test "X$pkg" = "X$p"; then
-	  enable_shared=yes
-	fi
-      done
-      IFS="$lt_save_ifs"
-      ;;
-    esac],
-    [enable_shared=]AC_ENABLE_SHARED_DEFAULT)
-])# AC_ENABLE_SHARED
-
-
-# AC_DISABLE_SHARED
-# -----------------
-# set the default shared flag to --disable-shared
-AC_DEFUN([AC_DISABLE_SHARED],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-AC_ENABLE_SHARED(no)
-])# AC_DISABLE_SHARED
-
-
-# AC_ENABLE_STATIC([DEFAULT])
-# ---------------------------
-# implement the --enable-static flag
-# DEFAULT is either `yes' or `no'.  If omitted, it defaults to `yes'.
-AC_DEFUN([AC_ENABLE_STATIC],
-[define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl
-AC_ARG_ENABLE([static],
-    [AC_HELP_STRING([--enable-static@<:@=PKGS@:>@],
-	[build static libraries @<:@default=]AC_ENABLE_STATIC_DEFAULT[@:>@])],
-    [p=${PACKAGE-default}
-    case $enableval in
-    yes) enable_static=yes ;;
-    no) enable_static=no ;;
-    *)
-     enable_static=no
-      # Look at the argument we got.  We use all the common list separators.
-      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
-      for pkg in $enableval; do
-	IFS="$lt_save_ifs"
-	if test "X$pkg" = "X$p"; then
-	  enable_static=yes
-	fi
-      done
-      IFS="$lt_save_ifs"
-      ;;
-    esac],
-    [enable_static=]AC_ENABLE_STATIC_DEFAULT)
-])# AC_ENABLE_STATIC
-
-
-# AC_DISABLE_STATIC
-# -----------------
-# set the default static flag to --disable-static
-AC_DEFUN([AC_DISABLE_STATIC],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-AC_ENABLE_STATIC(no)
-])# AC_DISABLE_STATIC
-
-
-# AC_ENABLE_FAST_INSTALL([DEFAULT])
-# ---------------------------------
-# implement the --enable-fast-install flag
-# DEFAULT is either `yes' or `no'.  If omitted, it defaults to `yes'.
-AC_DEFUN([AC_ENABLE_FAST_INSTALL],
-[define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl
-AC_ARG_ENABLE([fast-install],
-    [AC_HELP_STRING([--enable-fast-install@<:@=PKGS@:>@],
-    [optimize for fast installation @<:@default=]AC_ENABLE_FAST_INSTALL_DEFAULT[@:>@])],
-    [p=${PACKAGE-default}
-    case $enableval in
-    yes) enable_fast_install=yes ;;
-    no) enable_fast_install=no ;;
-    *)
-      enable_fast_install=no
-      # Look at the argument we got.  We use all the common list separators.
-      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
-      for pkg in $enableval; do
-	IFS="$lt_save_ifs"
-	if test "X$pkg" = "X$p"; then
-	  enable_fast_install=yes
-	fi
-      done
-      IFS="$lt_save_ifs"
-      ;;
-    esac],
-    [enable_fast_install=]AC_ENABLE_FAST_INSTALL_DEFAULT)
-])# AC_ENABLE_FAST_INSTALL
-
 
-# AC_DISABLE_FAST_INSTALL
-# -----------------------
-# set the default to --disable-fast-install
-AC_DEFUN([AC_DISABLE_FAST_INSTALL],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-AC_ENABLE_FAST_INSTALL(no)
-])# AC_DISABLE_FAST_INSTALL
+_LT_DECL([], [variables_saved_for_relink], [1],
+    [Variables whose values should be saved in libtool wrapper scripts and
+    restored at link time])
+_LT_DECL([], [need_lib_prefix], [0],
+    [Do we need the "lib" prefix for modules?])
+_LT_DECL([], [need_version], [0], [Do we need a version for libraries?])
+_LT_DECL([], [version_type], [0], [Library versioning type])
+_LT_DECL([], [runpath_var], [0],  [Shared library runtime path variable])
+_LT_DECL([], [shlibpath_var], [0],[Shared library path variable])
+_LT_DECL([], [shlibpath_overrides_runpath], [0],
+    [Is shlibpath searched before the hard-coded library search path?])
+_LT_DECL([], [libname_spec], [1], [Format of library name prefix])
+_LT_DECL([], [library_names_spec], [1],
+    [[List of archive names.  First name is the real one, the rest are links.
+    The last name is the one that the linker finds with -lNAME]])
+_LT_DECL([], [soname_spec], [1],
+    [[The coded name of the library, if different from the real name]])
+_LT_DECL([], [postinstall_cmds], [2],
+    [Command to use after installation of a shared archive])
+_LT_DECL([], [postuninstall_cmds], [2],
+    [Command to use after uninstallation of a shared archive])
+_LT_DECL([], [finish_cmds], [2],
+    [Commands used to finish a libtool library installation in a directory])
+_LT_DECL([], [finish_eval], [1],
+    [[As "finish_cmds", except a single script fragment to be evaled but
+    not shown]])
+_LT_DECL([], [hardcode_into_libs], [0],
+    [Whether we should hardcode library paths into libraries])
+_LT_DECL([], [sys_lib_search_path_spec], [2],
+    [Compile-time system search path for libraries])
+_LT_DECL([], [sys_lib_dlsearch_path_spec], [2],
+    [Run-time system search path for libraries])
+])# _LT_SYS_DYNAMIC_LINKER
 
 
-# AC_LIBTOOL_PICMODE([MODE])
+# _LT_PATH_TOOL_PREFIX(TOOL)
 # --------------------------
-# implement the --with-pic flag
-# MODE is either `yes' or `no'.  If omitted, it defaults to `both'.
-AC_DEFUN([AC_LIBTOOL_PICMODE],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-pic_mode=ifelse($#,1,$1,default)
-])# AC_LIBTOOL_PICMODE
-
-
-# AC_PROG_EGREP
-# -------------
-# This is predefined starting with Autoconf 2.54, so this conditional
-# definition can be removed once we require Autoconf 2.54 or later.
-m4_ifndef([AC_PROG_EGREP], [AC_DEFUN([AC_PROG_EGREP],
-[AC_CACHE_CHECK([for egrep], [ac_cv_prog_egrep],
-   [if echo a | (grep -E '(a|b)') >/dev/null 2>&1
-    then ac_cv_prog_egrep='grep -E'
-    else ac_cv_prog_egrep='egrep'
-    fi])
- EGREP=$ac_cv_prog_egrep
- AC_SUBST([EGREP])
-])])
-
-
-# AC_PATH_TOOL_PREFIX
-# -------------------
 # find a file program which can recognize shared library
-AC_DEFUN([AC_PATH_TOOL_PREFIX],
-[AC_REQUIRE([AC_PROG_EGREP])dnl
+AC_DEFUN([_LT_PATH_TOOL_PREFIX],
+[m4_require([_LT_DECL_EGREP])dnl
 AC_MSG_CHECKING([for $1])
 AC_CACHE_VAL(lt_cv_path_MAGIC_CMD,
 [case $MAGIC_CMD in
@@ -2215,7 +2767,7 @@
 dnl $ac_dummy forces splitting on constant user-supplied paths.
 dnl POSIX.2 word splitting is done only on the output of word expansions,
 dnl not every word.  This closes a longstanding sh security hole.
-  ac_dummy="ifelse([$2], , $PATH, [$2])"
+  ac_dummy="m4_if([$2], , $PATH, [$2])"
   for ac_dir in $ac_dummy; do
     IFS="$lt_save_ifs"
     test -z "$ac_dir" && ac_dir=.
@@ -2230,7 +2782,7 @@
 	    $EGREP "$file_magic_regex" > /dev/null; then
 	    :
 	  else
-	    cat <<EOF 1>&2
+	    cat <<_LT_EOF 1>&2
 
 *** Warning: the command libtool uses to detect shared libraries,
 *** $file_magic_cmd, produces output that libtool cannot recognize.
@@ -2241,7 +2793,7 @@
 *** may want to report the problem to your system manager and/or to
 *** bug-libtool@gnu.org
 
-EOF
+_LT_EOF
 	  fi ;;
 	esac
       fi
@@ -2258,37 +2810,47 @@
 else
   AC_MSG_RESULT(no)
 fi
-])# AC_PATH_TOOL_PREFIX
+_LT_DECL([], [MAGIC_CMD], [0],
+	 [Used to examine libraries when file_magic_cmd begins with "file"])dnl
+])# _LT_PATH_TOOL_PREFIX
 
+# Old name:
+AU_ALIAS([AC_PATH_TOOL_PREFIX], [_LT_PATH_TOOL_PREFIX])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_PATH_TOOL_PREFIX], [])
 
-# AC_PATH_MAGIC
-# -------------
+
+# _LT_PATH_MAGIC
+# --------------
 # find a file program which can recognize a shared library
-AC_DEFUN([AC_PATH_MAGIC],
-[AC_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin$PATH_SEPARATOR$PATH)
+m4_defun([_LT_PATH_MAGIC],
+[_LT_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin$PATH_SEPARATOR$PATH)
 if test -z "$lt_cv_path_MAGIC_CMD"; then
   if test -n "$ac_tool_prefix"; then
-    AC_PATH_TOOL_PREFIX(file, /usr/bin$PATH_SEPARATOR$PATH)
+    _LT_PATH_TOOL_PREFIX(file, /usr/bin$PATH_SEPARATOR$PATH)
   else
     MAGIC_CMD=:
   fi
 fi
-])# AC_PATH_MAGIC
+])# _LT_PATH_MAGIC
 
 
-# AC_PROG_LD
+# LT_PATH_LD
 # ----------
 # find the pathname to the GNU or non-GNU linker
-AC_DEFUN([AC_PROG_LD],
-[AC_ARG_WITH([gnu-ld],
-    [AC_HELP_STRING([--with-gnu-ld],
-	[assume the C compiler uses GNU ld @<:@default=no@:>@])],
-    [test "$withval" = no || with_gnu_ld=yes],
-    [with_gnu_ld=no])
-AC_REQUIRE([LT_AC_PROG_SED])dnl
-AC_REQUIRE([AC_PROG_CC])dnl
+AC_DEFUN([LT_PATH_LD],
+[AC_REQUIRE([AC_PROG_CC])dnl
 AC_REQUIRE([AC_CANONICAL_HOST])dnl
 AC_REQUIRE([AC_CANONICAL_BUILD])dnl
+m4_require([_LT_DECL_SED])dnl
+m4_require([_LT_DECL_EGREP])dnl
+
+AC_ARG_WITH([gnu-ld],
+    [AS_HELP_STRING([--with-gnu-ld],
+	[assume the C compiler uses GNU ld @<:@default=no@:>@])],
+    [test "$withval" = no || with_gnu_ld=yes],
+    [with_gnu_ld=no])dnl
+
 ac_prog=ld
 if test "$GCC" = yes; then
   # Check if gcc -print-prog-name=ld gives a path.
@@ -2305,9 +2867,9 @@
     [[\\/]]* | ?:[[\\/]]*)
       re_direlt='/[[^/]][[^/]]*/\.\./'
       # Canonicalize the pathname of ld
-      ac_prog=`echo $ac_prog| $SED 's%\\\\%/%g'`
-      while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
-	ac_prog=`echo $ac_prog| $SED "s%$re_direlt%/%"`
+      ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'`
+      while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do
+	ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"`
       done
       test -z "$LD" && LD="$ac_prog"
       ;;
@@ -2357,15 +2919,24 @@
   AC_MSG_RESULT(no)
 fi
 test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
-AC_PROG_LD_GNU
-])# AC_PROG_LD
+_LT_PATH_LD_GNU
+AC_SUBST([LD])
 
+_LT_TAGDECL([], [LD], [1], [The linker used to build libraries])
+])# LT_PATH_LD
 
-# AC_PROG_LD_GNU
-# --------------
-AC_DEFUN([AC_PROG_LD_GNU],
-[AC_REQUIRE([AC_PROG_EGREP])dnl
-AC_CACHE_CHECK([if the linker ($LD) is GNU ld], lt_cv_prog_gnu_ld,
+# Old names:
+AU_ALIAS([AM_PROG_LD], [LT_PATH_LD])
+AU_ALIAS([AC_PROG_LD], [LT_PATH_LD])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AM_PROG_LD], [])
+dnl AC_DEFUN([AC_PROG_LD], [])
+
+
+# _LT_PATH_LD_GNU
+#- --------------
+m4_defun([_LT_PATH_LD_GNU],
+[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], lt_cv_prog_gnu_ld,
 [# I'd rather use --version here, but apparently some GNU lds only accept -v.
 case `$LD -v 2>&1 </dev/null` in
 *GNU* | *'with BFD'*)
@@ -2376,14 +2947,14 @@
   ;;
 esac])
 with_gnu_ld=$lt_cv_prog_gnu_ld
-])# AC_PROG_LD_GNU
+])# _LT_PATH_LD_GNU
 
 
-# AC_PROG_LD_RELOAD_FLAG
-# ----------------------
+# _LT_CMD_RELOAD
+# --------------
 # find reload flag for linker
 #   -- PORTME Some linkers may need a different reload flag.
-AC_DEFUN([AC_PROG_LD_RELOAD_FLAG],
+m4_defun([_LT_CMD_RELOAD],
 [AC_CACHE_CHECK([for $LD option to reload object files],
   lt_cv_ld_reload_flag,
   [lt_cv_ld_reload_flag='-r'])
@@ -2402,15 +2973,19 @@
     fi
     ;;
 esac
-])# AC_PROG_LD_RELOAD_FLAG
+_LT_DECL([], [reload_flag], [1], [How to create reloadable object files])dnl
+_LT_DECL([], [reload_cmds], [2])dnl
+])# _LT_CMD_RELOAD
 
 
-# AC_DEPLIBS_CHECK_METHOD
-# -----------------------
+# _LT_CHECK_MAGIC_METHOD
+# ----------------------
 # how to check for library dependencies
 #  -- PORTME fill in with the dynamic library characteristics
-AC_DEFUN([AC_DEPLIBS_CHECK_METHOD],
-[AC_CACHE_CHECK([how to recognize dependent libraries],
+m4_defun([_LT_CHECK_MAGIC_METHOD],
+[m4_require([_LT_DECL_EGREP])
+m4_require([_LT_DECL_OBJDUMP])
+AC_CACHE_CHECK([how to recognize dependent libraries],
 lt_cv_deplibs_check_method,
 [lt_cv_file_magic_cmd='$MAGIC_CMD'
 lt_cv_file_magic_test_file=
@@ -2460,12 +3035,18 @@
   fi
   ;;
 
+cegcc)
+  # use the weaker test based on 'objdump'. See mingw*.
+  lt_cv_deplibs_check_method='file_magic file format pe-arm-.*little(.*architecture: arm)?'
+  lt_cv_file_magic_cmd='$OBJDUMP -f'
+  ;;
+
 darwin* | rhapsody*)
   lt_cv_deplibs_check_method=pass_all
   ;;
 
 freebsd* | dragonfly*)
-  if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
+  if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
     case $host_cpu in
     i*86 )
       # Not sure whether the presence of OpenBSD here was a mistake.
@@ -2522,8 +3103,8 @@
   lt_cv_deplibs_check_method=pass_all
   ;;
 
-netbsd*)
-  if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
+netbsd* | netbsdelf*-gnu)
+  if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
     lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$'
   else
     lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|_pic\.a)$'
@@ -2536,12 +3117,12 @@
   lt_cv_file_magic_test_file=/usr/lib/libnls.so
   ;;
 
-nto-qnx*)
-  lt_cv_deplibs_check_method=unknown
+*nto* | *qnx*)
+  lt_cv_deplibs_check_method=pass_all
   ;;
 
 openbsd*)
-  if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+  if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
     lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|\.so|_pic\.a)$'
   else
     lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$'
@@ -2560,6 +3141,10 @@
   lt_cv_deplibs_check_method=pass_all
   ;;
 
+sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
 sysv4 | sysv4.3*)
   case $host_vendor in
   motorola)
@@ -2587,7 +3172,7 @@
   esac
   ;;
 
-sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
+tpf*)
   lt_cv_deplibs_check_method=pass_all
   ;;
 esac
@@ -2595,14 +3180,20 @@
 file_magic_cmd=$lt_cv_file_magic_cmd
 deplibs_check_method=$lt_cv_deplibs_check_method
 test -z "$deplibs_check_method" && deplibs_check_method=unknown
-])# AC_DEPLIBS_CHECK_METHOD
 
+_LT_DECL([], [deplibs_check_method], [1],
+    [Method to check whether dependent libraries are shared objects])
+_LT_DECL([], [file_magic_cmd], [1],
+    [Command to use when deplibs_check_method == "file_magic"])
+])# _LT_CHECK_MAGIC_METHOD
 
-# AC_PROG_NM
+
+# LT_PATH_NM
 # ----------
-# find the pathname to a BSD-compatible name lister
-AC_DEFUN([AC_PROG_NM],
-[AC_CACHE_CHECK([for BSD-compatible nm], lt_cv_path_NM,
+# find the pathname to a BSD- or MS-compatible name lister
+AC_DEFUN([LT_PATH_NM],
+[AC_REQUIRE([AC_PROG_CC])dnl
+AC_CACHE_CHECK([for BSD- or MS-compatible name lister (nm)], lt_cv_path_NM,
 [if test -n "$NM"; then
   # Let the user override the test.
   lt_cv_path_NM="$NM"
@@ -2644,16 +3235,51 @@
     done
     IFS="$lt_save_ifs"
   done
-  test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm
+  : ${lt_cv_path_NM=no}
 fi])
-NM="$lt_cv_path_NM"
-])# AC_PROG_NM
+if test "$lt_cv_path_NM" != "no"; then
+  NM="$lt_cv_path_NM"
+else
+  # Didn't find any BSD compatible name lister, look for dumpbin.
+  AC_CHECK_TOOLS(DUMPBIN, ["dumpbin -symbols" "link -dump -symbols"], :)
+  AC_SUBST([DUMPBIN])
+  if test "$DUMPBIN" != ":"; then
+    NM="$DUMPBIN"
+  fi
+fi
+test -z "$NM" && NM=nm
+AC_SUBST([NM])
+_LT_DECL([], [NM], [1], [A BSD- or MS-compatible name lister])dnl
 
+AC_CACHE_CHECK([the name lister ($NM) interface], [lt_cv_nm_interface],
+  [lt_cv_nm_interface="BSD nm"
+  echo "int some_variable = 0;" > conftest.$ac_ext
+  (eval echo "\"\$as_me:__oline__: $ac_compile\"" >&AS_MESSAGE_LOG_FD)
+  (eval "$ac_compile" 2>conftest.err)
+  cat conftest.err >&AS_MESSAGE_LOG_FD
+  (eval echo "\"\$as_me:__oline__: $NM \\\"conftest.$ac_objext\\\"\"" >&AS_MESSAGE_LOG_FD)
+  (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out)
+  cat conftest.err >&AS_MESSAGE_LOG_FD
+  (eval echo "\"\$as_me:__oline__: output\"" >&AS_MESSAGE_LOG_FD)
+  cat conftest.out >&AS_MESSAGE_LOG_FD
+  if $GREP 'External.*some_variable' conftest.out > /dev/null; then
+    lt_cv_nm_interface="MS dumpbin"
+  fi
+  rm -f conftest*])
+])# LT_PATH_NM
+
+# Old names:
+AU_ALIAS([AM_PROG_NM], [LT_PATH_NM])
+AU_ALIAS([AC_PROG_NM], [LT_PATH_NM])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AM_PROG_NM], [])
+dnl AC_DEFUN([AC_PROG_NM], [])
 
-# AC_CHECK_LIBM
-# -------------
+
+# LT_LIB_M
+# --------
 # check for math library
-AC_DEFUN([AC_CHECK_LIBM],
+AC_DEFUN([LT_LIB_M],
 [AC_REQUIRE([AC_CANONICAL_HOST])dnl
 LIBM=
 case $host in
@@ -2668,4017 +3294,4697 @@
   AC_CHECK_LIB(m, cos, LIBM="-lm")
   ;;
 esac
-])# AC_CHECK_LIBM
-
-
-# AC_LIBLTDL_CONVENIENCE([DIRECTORY])
-# -----------------------------------
-# sets LIBLTDL to the link flags for the libltdl convenience library and
-# LTDLINCL to the include flags for the libltdl header and adds
-# --enable-ltdl-convenience to the configure arguments.  Note that
-# AC_CONFIG_SUBDIRS is not called here.  If DIRECTORY is not provided,
-# it is assumed to be `libltdl'.  LIBLTDL will be prefixed with
-# '${top_builddir}/' and LTDLINCL will be prefixed with '${top_srcdir}/'
-# (note the single quotes!).  If your package is not flat and you're not
-# using automake, define top_builddir and top_srcdir appropriately in
-# the Makefiles.
-AC_DEFUN([AC_LIBLTDL_CONVENIENCE],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-  case $enable_ltdl_convenience in
-  no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;;
-  "") enable_ltdl_convenience=yes
-      ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;;
-  esac
-  LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdlc.la
-  LTDLINCL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl'])
-  # For backwards non-gettext consistent compatibility...
-  INCLTDL="$LTDLINCL"
-])# AC_LIBLTDL_CONVENIENCE
-
+AC_SUBST([LIBM])
+])# LT_LIB_M
 
-# AC_LIBLTDL_INSTALLABLE([DIRECTORY])
-# -----------------------------------
-# sets LIBLTDL to the link flags for the libltdl installable library and
-# LTDLINCL to the include flags for the libltdl header and adds
-# --enable-ltdl-install to the configure arguments.  Note that
-# AC_CONFIG_SUBDIRS is not called here.  If DIRECTORY is not provided,
-# and an installed libltdl is not found, it is assumed to be `libltdl'.
-# LIBLTDL will be prefixed with '${top_builddir}/'# and LTDLINCL with
-# '${top_srcdir}/' (note the single quotes!).  If your package is not
-# flat and you're not using automake, define top_builddir and top_srcdir
-# appropriately in the Makefiles.
-# In the future, this macro may have to be called after AC_PROG_LIBTOOL.
-AC_DEFUN([AC_LIBLTDL_INSTALLABLE],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-  AC_CHECK_LIB(ltdl, lt_dlinit,
-  [test x"$enable_ltdl_install" != xyes && enable_ltdl_install=no],
-  [if test x"$enable_ltdl_install" = xno; then
-     AC_MSG_WARN([libltdl not installed, but installation disabled])
-   else
-     enable_ltdl_install=yes
-   fi
-  ])
-  if test x"$enable_ltdl_install" = x"yes"; then
-    ac_configure_args="$ac_configure_args --enable-ltdl-install"
-    LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdl.la
-    LTDLINCL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl'])
-  else
-    ac_configure_args="$ac_configure_args --enable-ltdl-install=no"
-    LIBLTDL="-lltdl"
-    LTDLINCL=
-  fi
-  # For backwards non-gettext consistent compatibility...
-  INCLTDL="$LTDLINCL"
-])# AC_LIBLTDL_INSTALLABLE
+# Old name:
+AU_ALIAS([AC_CHECK_LIBM], [LT_LIB_M])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_CHECK_LIBM], [])
 
 
-# AC_LIBTOOL_CXX
-# --------------
-# enable support for C++ libraries
-AC_DEFUN([AC_LIBTOOL_CXX],
-[AC_REQUIRE([_LT_AC_LANG_CXX])
-])# AC_LIBTOOL_CXX
+# _LT_COMPILER_NO_RTTI([TAGNAME])
+# -------------------------------
+m4_defun([_LT_COMPILER_NO_RTTI],
+[m4_require([_LT_TAG_COMPILER])dnl
 
+_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=
 
-# _LT_AC_LANG_CXX
-# ---------------
-AC_DEFUN([_LT_AC_LANG_CXX],
-[AC_REQUIRE([AC_PROG_CXX])
-AC_REQUIRE([_LT_AC_PROG_CXXCPP])
-_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}CXX])
-])# _LT_AC_LANG_CXX
+if test "$GCC" = yes; then
+  _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin'
 
-# _LT_AC_PROG_CXXCPP
-# ------------------
-AC_DEFUN([_LT_AC_PROG_CXXCPP],
-[
-AC_REQUIRE([AC_PROG_CXX])
-if test -n "$CXX" && ( test "X$CXX" != "Xno" &&
-    ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) ||
-    (test "X$CXX" != "Xg++"))) ; then
-  AC_PROG_CXXCPP
+  _LT_COMPILER_OPTION([if $compiler supports -fno-rtti -fno-exceptions],
+    lt_cv_prog_compiler_rtti_exceptions,
+    [-fno-rtti -fno-exceptions], [],
+    [_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)="$_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) -fno-rtti -fno-exceptions"])
 fi
-])# _LT_AC_PROG_CXXCPP
+_LT_TAGDECL([no_builtin_flag], [lt_prog_compiler_no_builtin_flag], [1],
+	[Compiler flag to turn off builtin functions])
+])# _LT_COMPILER_NO_RTTI
 
-# AC_LIBTOOL_F77
-# --------------
-# enable support for Fortran 77 libraries
-AC_DEFUN([AC_LIBTOOL_F77],
-[AC_REQUIRE([_LT_AC_LANG_F77])
-])# AC_LIBTOOL_F77
 
+# _LT_CMD_GLOBAL_SYMBOLS
+# ----------------------
+m4_defun([_LT_CMD_GLOBAL_SYMBOLS],
+[AC_REQUIRE([AC_CANONICAL_HOST])dnl
+AC_REQUIRE([AC_PROG_CC])dnl
+AC_REQUIRE([LT_PATH_NM])dnl
+AC_REQUIRE([LT_PATH_LD])dnl
+m4_require([_LT_DECL_SED])dnl
+m4_require([_LT_DECL_EGREP])dnl
+m4_require([_LT_TAG_COMPILER])dnl
 
-# _LT_AC_LANG_F77
-# ---------------
-AC_DEFUN([_LT_AC_LANG_F77],
-[AC_REQUIRE([AC_PROG_F77])
-_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}F77])
-])# _LT_AC_LANG_F77
+# Check for command to grab the raw symbol name followed by C symbol from nm.
+AC_MSG_CHECKING([command to parse $NM output from $compiler object])
+AC_CACHE_VAL([lt_cv_sys_global_symbol_pipe],
+[
+# These are sane defaults that work on at least a few old systems.
+# [They come from Ultrix.  What could be older than Ultrix?!! ;)]
 
+# Character class describing NM global symbol codes.
+symcode='[[BCDEGRST]]'
 
-# AC_LIBTOOL_GCJ
-# --------------
-# enable support for GCJ libraries
-AC_DEFUN([AC_LIBTOOL_GCJ],
-[AC_REQUIRE([_LT_AC_LANG_GCJ])
-])# AC_LIBTOOL_GCJ
+# Regexp to match symbols that can be accessed directly from C.
+sympat='\([[_A-Za-z]][[_A-Za-z0-9]]*\)'
 
+# Define system-specific variables.
+case $host_os in
+aix*)
+  symcode='[[BCDT]]'
+  ;;
+cygwin* | mingw* | pw32* | cegcc*)
+  symcode='[[ABCDGISTW]]'
+  ;;
+hpux*)
+  if test "$host_cpu" = ia64; then
+    symcode='[[ABCDEGRST]]'
+  fi
+  ;;
+irix* | nonstopux*)
+  symcode='[[BCDEGRST]]'
+  ;;
+osf*)
+  symcode='[[BCDEGQRST]]'
+  ;;
+solaris*)
+  symcode='[[BDRT]]'
+  ;;
+sco3.2v5*)
+  symcode='[[DT]]'
+  ;;
+sysv4.2uw2*)
+  symcode='[[DT]]'
+  ;;
+sysv5* | sco5v6* | unixware* | OpenUNIX*)
+  symcode='[[ABDT]]'
+  ;;
+sysv4)
+  symcode='[[DFNSTU]]'
+  ;;
+esac
 
-# _LT_AC_LANG_GCJ
-# ---------------
-AC_DEFUN([_LT_AC_LANG_GCJ],
-[AC_PROVIDE_IFELSE([AC_PROG_GCJ],[],
-  [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],[],
-    [AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ],[],
-      [ifdef([AC_PROG_GCJ],[AC_REQUIRE([AC_PROG_GCJ])],
-	 [ifdef([A][M_PROG_GCJ],[AC_REQUIRE([A][M_PROG_GCJ])],
-	   [AC_REQUIRE([A][C_PROG_GCJ_OR_A][M_PROG_GCJ])])])])])])
-_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}GCJ])
-])# _LT_AC_LANG_GCJ
+# If we're using GNU nm, then use its standard symbol codes.
+case `$NM -V 2>&1` in
+*GNU* | *'with BFD'*)
+  symcode='[[ABCDGIRSTW]]' ;;
+esac
 
+# Transform an extracted symbol line into a proper C declaration.
+# Some systems (esp. on ia64) link data and code symbols differently,
+# so use this general approach.
+lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
 
-# AC_LIBTOOL_RC
-# -------------
-# enable support for Windows resource files
-AC_DEFUN([AC_LIBTOOL_RC],
-[AC_REQUIRE([LT_AC_PROG_RC])
-_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}RC])
-])# AC_LIBTOOL_RC
+# Transform an extracted symbol line into symbol name and symbol address
+lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/  {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/  {\"\2\", (void *) \&\2},/p'"
+lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([[^ ]]*\) $/  {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \(lib[[^ ]]*\)$/  {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/  {\"lib\2\", (void *) \&\2},/p'"
 
-
-# AC_LIBTOOL_LANG_C_CONFIG
-# ------------------------
-# Ensure that the configuration vars for the C compiler are
-# suitably defined.  Those variables are subsequently used by
-# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
-AC_DEFUN([AC_LIBTOOL_LANG_C_CONFIG], [_LT_AC_LANG_C_CONFIG])
-AC_DEFUN([_LT_AC_LANG_C_CONFIG],
-[lt_save_CC="$CC"
-AC_LANG_PUSH(C)
-
-# Source file extension for C test sources.
-ac_ext=c
-
-# Object file extension for compiled C test sources.
-objext=o
-_LT_AC_TAGVAR(objext, $1)=$objext
-
-# Code to be used in simple compile tests
-lt_simple_compile_test_code="int some_variable = 0;"
-
-# Code to be used in simple link tests
-lt_simple_link_test_code='int main(){return(0);}'
-
-_LT_AC_SYS_COMPILER
-
-# save warnings/boilerplate of simple test code
-_LT_COMPILER_BOILERPLATE
-_LT_LINKER_BOILERPLATE
-
-AC_LIBTOOL_PROG_COMPILER_NO_RTTI($1)
-AC_LIBTOOL_PROG_COMPILER_PIC($1)
-AC_LIBTOOL_PROG_CC_C_O($1)
-AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1)
-AC_LIBTOOL_PROG_LD_SHLIBS($1)
-AC_LIBTOOL_SYS_DYNAMIC_LINKER($1)
-AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1)
-AC_LIBTOOL_SYS_LIB_STRIP
-AC_LIBTOOL_DLOPEN_SELF
-
-# Report which library types will actually be built
-AC_MSG_CHECKING([if libtool supports shared libraries])
-AC_MSG_RESULT([$can_build_shared])
-
-AC_MSG_CHECKING([whether to build shared libraries])
-test "$can_build_shared" = "no" && enable_shared=no
-
-# On AIX, shared libraries and static libraries use the same namespace, and
-# are all built from PIC.
-case $host_os in
-aix3*)
-  test "$enable_shared" = yes && enable_static=no
-  if test -n "$RANLIB"; then
-    archive_cmds="$archive_cmds~\$RANLIB \$lib"
-    postinstall_cmds='$RANLIB $lib'
-  fi
+# Handle CRLF in mingw tool chain
+opt_cr=
+case $build_os in
+mingw*)
+  opt_cr=`$ECHO 'x\{0,1\}' | tr x '\015'` # option cr in regexp
   ;;
-
-aix[[4-9]]*)
-  if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
-    test "$enable_shared" = yes && enable_static=no
-  fi
-    ;;
 esac
-AC_MSG_RESULT([$enable_shared])
-
-AC_MSG_CHECKING([whether to build static libraries])
-# Make sure either enable_shared or enable_static is yes.
-test "$enable_shared" = yes || enable_static=yes
-AC_MSG_RESULT([$enable_static])
-
-AC_LIBTOOL_CONFIG($1)
-
-AC_LANG_POP
-CC="$lt_save_CC"
-])# AC_LIBTOOL_LANG_C_CONFIG
-
-
-# AC_LIBTOOL_LANG_CXX_CONFIG
-# --------------------------
-# Ensure that the configuration vars for the C compiler are
-# suitably defined.  Those variables are subsequently used by
-# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
-AC_DEFUN([AC_LIBTOOL_LANG_CXX_CONFIG], [_LT_AC_LANG_CXX_CONFIG(CXX)])
-AC_DEFUN([_LT_AC_LANG_CXX_CONFIG],
-[AC_LANG_PUSH(C++)
-AC_REQUIRE([AC_PROG_CXX])
-AC_REQUIRE([_LT_AC_PROG_CXXCPP])
-
-_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-_LT_AC_TAGVAR(allow_undefined_flag, $1)=
-_LT_AC_TAGVAR(always_export_symbols, $1)=no
-_LT_AC_TAGVAR(archive_expsym_cmds, $1)=
-_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=
-_LT_AC_TAGVAR(hardcode_direct, $1)=no
-_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=
-_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
-_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
-_LT_AC_TAGVAR(hardcode_minus_L, $1)=no
-_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
-_LT_AC_TAGVAR(hardcode_automatic, $1)=no
-_LT_AC_TAGVAR(module_cmds, $1)=
-_LT_AC_TAGVAR(module_expsym_cmds, $1)=
-_LT_AC_TAGVAR(link_all_deplibs, $1)=unknown
-_LT_AC_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
-_LT_AC_TAGVAR(no_undefined_flag, $1)=
-_LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
-_LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=no
-
-# Dependencies to place before and after the object being linked:
-_LT_AC_TAGVAR(predep_objects, $1)=
-_LT_AC_TAGVAR(postdep_objects, $1)=
-_LT_AC_TAGVAR(predeps, $1)=
-_LT_AC_TAGVAR(postdeps, $1)=
-_LT_AC_TAGVAR(compiler_lib_search_path, $1)=
-_LT_AC_TAGVAR(compiler_lib_search_dirs, $1)=
-
-# Source file extension for C++ test sources.
-ac_ext=cpp
 
-# Object file extension for compiled C++ test sources.
-objext=o
-_LT_AC_TAGVAR(objext, $1)=$objext
-
-# Code to be used in simple compile tests
-lt_simple_compile_test_code="int some_variable = 0;"
+# Try without a prefix underscore, then with it.
+for ac_symprfx in "" "_"; do
 
-# Code to be used in simple link tests
-lt_simple_link_test_code='int main(int, char *[[]]) { return(0); }'
+  # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol.
+  symxfrm="\\1 $ac_symprfx\\2 \\2"
 
-# ltmain only uses $CC for tagged configurations so make sure $CC is set.
-_LT_AC_SYS_COMPILER
+  # Write the raw and C identifiers.
+  if test "$lt_cv_nm_interface" = "MS dumpbin"; then
+    # Fake it for dumpbin and say T for any non-static function
+    # and D for any global variable.
+    # Also find C++ and __fastcall symbols from MSVC++,
+    # which start with @ or ?.
+    lt_cv_sys_global_symbol_pipe="$AWK ['"\
+"     {last_section=section; section=\$ 3};"\
+"     /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\
+"     \$ 0!~/External *\|/{next};"\
+"     / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\
+"     {if(hide[section]) next};"\
+"     {f=0}; \$ 0~/\(\).*\|/{f=1}; {printf f ? \"T \" : \"D \"};"\
+"     {split(\$ 0, a, /\||\r/); split(a[2], s)};"\
+"     s[1]~/^[@?]/{print s[1], s[1]; next};"\
+"     s[1]~prfx {split(s[1],t,\"@\"); print t[1], substr(t[1],length(prfx))}"\
+"     ' prfx=^$ac_symprfx]"
+  else
+    lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[	 ]]\($symcode$symcode*\)[[	 ]][[	 ]]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'"
+  fi
 
-# save warnings/boilerplate of simple test code
-_LT_COMPILER_BOILERPLATE
-_LT_LINKER_BOILERPLATE
+  # Check to see that the pipe works correctly.
+  pipe_works=no
 
-# Allow CC to be a program name with arguments.
-lt_save_CC=$CC
-lt_save_LD=$LD
-lt_save_GCC=$GCC
-GCC=$GXX
-lt_save_with_gnu_ld=$with_gnu_ld
-lt_save_path_LD=$lt_cv_path_LD
-if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then
-  lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx
-else
-  $as_unset lt_cv_prog_gnu_ld
-fi
-if test -n "${lt_cv_path_LDCXX+set}"; then
-  lt_cv_path_LD=$lt_cv_path_LDCXX
-else
-  $as_unset lt_cv_path_LD
-fi
-test -z "${LDCXX+set}" || LD=$LDCXX
-CC=${CXX-"c++"}
-compiler=$CC
-_LT_AC_TAGVAR(compiler, $1)=$CC
-_LT_CC_BASENAME([$compiler])
+  rm -f conftest*
+  cat > conftest.$ac_ext <<_LT_EOF
+#ifdef __cplusplus
+extern "C" {
+#endif
+char nm_test_var;
+void nm_test_func(void);
+void nm_test_func(void){}
+#ifdef __cplusplus
+}
+#endif
+int main(){nm_test_var='a';nm_test_func();return(0);}
+_LT_EOF
 
-# We don't want -fno-exception wen compiling C++ code, so set the
-# no_builtin_flag separately
-if test "$GXX" = yes; then
-  _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin'
-else
-  _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=
-fi
+  if AC_TRY_EVAL(ac_compile); then
+    # Now try to grab the symbols.
+    nlist=conftest.nm
+    if AC_TRY_EVAL(NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) && test -s "$nlist"; then
+      # Try sorting and uniquifying the output.
+      if sort "$nlist" | uniq > "$nlist"T; then
+	mv -f "$nlist"T "$nlist"
+      else
+	rm -f "$nlist"T
+      fi
 
-if test "$GXX" = yes; then
-  # Set up default GNU C++ configuration
+      # Make sure that we snagged all the symbols we need.
+      if $GREP ' nm_test_var$' "$nlist" >/dev/null; then
+	if $GREP ' nm_test_func$' "$nlist" >/dev/null; then
+	  cat <<_LT_EOF > conftest.$ac_ext
+#ifdef __cplusplus
+extern "C" {
+#endif
 
-  AC_PROG_LD
+_LT_EOF
+	  # Now generate the symbol file.
+	  eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | $GREP -v main >> conftest.$ac_ext'
 
-  # Check if GNU C++ uses GNU ld as the underlying linker, since the
-  # archiving commands below assume that GNU ld is being used.
-  if test "$with_gnu_ld" = yes; then
-    _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
-    _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+	  cat <<_LT_EOF >> conftest.$ac_ext
 
-    _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir'
-    _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+/* The mapping between symbol names and symbols.  */
+const struct {
+  const char *name;
+  void       *address;
+}
+lt__PROGRAM__LTX_preloaded_symbols[[]] =
+{
+  { "@PROGRAM@", (void *) 0 },
+_LT_EOF
+	  $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/  {\"\2\", (void *) \&\2},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext
+	  cat <<\_LT_EOF >> conftest.$ac_ext
+  {0, (void *) 0}
+};
 
-    # If archive_cmds runs LD, not CC, wlarc should be empty
-    # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to
-    #     investigate it a little bit more. (MM)
-    wlarc='${wl}'
+/* This works around a problem in FreeBSD linker */
+#ifdef FREEBSD_WORKAROUND
+static const void *lt_preloaded_setup() {
+  return lt__PROGRAM__LTX_preloaded_symbols;
+}
+#endif
 
-    # ancient GNU ld didn't support --whole-archive et. al.
-    if eval "`$CC -print-prog-name=ld` --help 2>&1" | \
-	grep 'no-whole-archive' > /dev/null; then
-      _LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+#ifdef __cplusplus
+}
+#endif
+_LT_EOF
+	  # Now try linking the two files.
+	  mv conftest.$ac_objext conftstm.$ac_objext
+	  lt_save_LIBS="$LIBS"
+	  lt_save_CFLAGS="$CFLAGS"
+	  LIBS="conftstm.$ac_objext"
+	  CFLAGS="$CFLAGS$_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)"
+	  if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext}; then
+	    pipe_works=yes
+	  fi
+	  LIBS="$lt_save_LIBS"
+	  CFLAGS="$lt_save_CFLAGS"
+	else
+	  echo "cannot find nm_test_func in $nlist" >&AS_MESSAGE_LOG_FD
+	fi
+      else
+	echo "cannot find nm_test_var in $nlist" >&AS_MESSAGE_LOG_FD
+      fi
     else
-      _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
+      echo "cannot run $lt_cv_sys_global_symbol_pipe" >&AS_MESSAGE_LOG_FD
     fi
   else
-    with_gnu_ld=no
-    wlarc=
-
-    # A generic and very simple default shared library creation
-    # command for GNU C++ for the case where it uses the native
-    # linker, instead of GNU ld.  If possible, this setting should
-    # overridden to take advantage of the native linker features on
-    # the platform it is being used on.
-    _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
+    echo "$progname: failed program was:" >&AS_MESSAGE_LOG_FD
+    cat conftest.$ac_ext >&5
   fi
+  rm -rf conftest* conftst*
 
-  # Commands to make compiler produce verbose output that lists
-  # what "hidden" libraries, object files and flags are used when
-  # linking a shared library.
-  output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"'
-
+  # Do not use the global_symbol_pipe unless it works.
+  if test "$pipe_works" = yes; then
+    break
+  else
+    lt_cv_sys_global_symbol_pipe=
+  fi
+done
+])
+if test -z "$lt_cv_sys_global_symbol_pipe"; then
+  lt_cv_sys_global_symbol_to_cdecl=
+fi
+if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then
+  AC_MSG_RESULT(failed)
 else
-  GXX=no
-  with_gnu_ld=no
-  wlarc=
+  AC_MSG_RESULT(ok)
 fi
 
-# PORTME: fill in a description of your system's C++ link characteristics
-AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries])
-_LT_AC_TAGVAR(ld_shlibs, $1)=yes
-case $host_os in
-  aix3*)
-    # FIXME: insert proper C++ library support
-    _LT_AC_TAGVAR(ld_shlibs, $1)=no
-    ;;
-  aix[[4-9]]*)
-    if test "$host_cpu" = ia64; then
-      # On IA64, the linker does run time linking by default, so we don't
-      # have to do anything special.
-      aix_use_runtimelinking=no
-      exp_sym_flag='-Bexport'
-      no_entry_flag=""
-    else
-      aix_use_runtimelinking=no
-
-      # Test if we are trying to use run time linking or normal
-      # AIX style linking. If -brtl is somewhere in LDFLAGS, we
-      # need to do runtime linking.
-      case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*)
-	for ld_flag in $LDFLAGS; do
-	  case $ld_flag in
-	  *-brtl*)
-	    aix_use_runtimelinking=yes
-	    break
-	    ;;
-	  esac
-	done
-	;;
-      esac
-
-      exp_sym_flag='-bexport'
-      no_entry_flag='-bnoentry'
-    fi
+_LT_DECL([global_symbol_pipe], [lt_cv_sys_global_symbol_pipe], [1],
+    [Take the output of nm and produce a listing of raw symbols and C names])
+_LT_DECL([global_symbol_to_cdecl], [lt_cv_sys_global_symbol_to_cdecl], [1],
+    [Transform the output of nm in a proper C declaration])
+_LT_DECL([global_symbol_to_c_name_address],
+    [lt_cv_sys_global_symbol_to_c_name_address], [1],
+    [Transform the output of nm in a C name address pair])
+_LT_DECL([global_symbol_to_c_name_address_lib_prefix],
+    [lt_cv_sys_global_symbol_to_c_name_address_lib_prefix], [1],
+    [Transform the output of nm in a C name address pair when lib prefix is needed])
+]) # _LT_CMD_GLOBAL_SYMBOLS
 
-    # When large executables or shared objects are built, AIX ld can
-    # have problems creating the table of contents.  If linking a library
-    # or program results in "error TOC overflow" add -mminimal-toc to
-    # CXXFLAGS/CFLAGS for g++/gcc.  In the cases where that is not
-    # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
-
-    _LT_AC_TAGVAR(archive_cmds, $1)=''
-    _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-    _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':'
-    _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
 
-    if test "$GXX" = yes; then
-      case $host_os in aix4.[[012]]|aix4.[[012]].*)
-      # We only want to do this on AIX 4.2 and lower, the check
-      # below for broken collect2 doesn't work under 4.3+
-	collect2name=`${CC} -print-prog-name=collect2`
-	if test -f "$collect2name" && \
-	   strings "$collect2name" | grep resolve_lib_name >/dev/null
-	then
-	  # We have reworked collect2
-	  :
-	else
-	  # We have old collect2
-	  _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported
-	  # It fails to find uninstalled libraries when the uninstalled
-	  # path is not listed in the libpath.  Setting hardcode_minus_L
-	  # to unsupported forces relinking
-	  _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-	  _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-	  _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
-	fi
-	;;
-      esac
-      shared_flag='-shared'
-      if test "$aix_use_runtimelinking" = yes; then
-	shared_flag="$shared_flag "'${wl}-G'
-      fi
-    else
-      # not using gcc
-      if test "$host_cpu" = ia64; then
-	# VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
-	# chokes on -Wl,-G. The following line is correct:
-	shared_flag='-G'
-      else
-	if test "$aix_use_runtimelinking" = yes; then
-	  shared_flag='${wl}-G'
-	else
-	  shared_flag='${wl}-bM:SRE'
-	fi
-      fi
-    fi
+# _LT_COMPILER_PIC([TAGNAME])
+# ---------------------------
+m4_defun([_LT_COMPILER_PIC],
+[m4_require([_LT_TAG_COMPILER])dnl
+_LT_TAGVAR(lt_prog_compiler_wl, $1)=
+_LT_TAGVAR(lt_prog_compiler_pic, $1)=
+_LT_TAGVAR(lt_prog_compiler_static, $1)=
 
-    # It seems that -bexpall does not export symbols beginning with
-    # underscore (_), so it is better to generate a list of symbols to export.
-    _LT_AC_TAGVAR(always_export_symbols, $1)=yes
-    if test "$aix_use_runtimelinking" = yes; then
-      # Warning - without using the other runtime loading flags (-brtl),
-      # -berok will link without error, but may produce a broken library.
-      _LT_AC_TAGVAR(allow_undefined_flag, $1)='-berok'
-      # Determine the default libpath from the value encoded in an empty executable.
-      _LT_AC_SYS_LIBPATH_AIX
-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
+AC_MSG_CHECKING([for $compiler option to produce PIC])
+m4_if([$1], [CXX], [
+  # C++ specific cases for pic, static, wl, etc.
+  if test "$GXX" = yes; then
+    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+    _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
 
-      _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
-     else
+    case $host_os in
+    aix*)
+      # All AIX code is PIC.
       if test "$host_cpu" = ia64; then
-	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
-	_LT_AC_TAGVAR(allow_undefined_flag, $1)="-z nodefs"
-	_LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
-      else
-	# Determine the default libpath from the value encoded in an empty executable.
-	_LT_AC_SYS_LIBPATH_AIX
-	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
-	# Warning - without using the other run time loading flags,
-	# -berok will link without error, but may produce a broken library.
-	_LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
-	_LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
-	# Exported symbols can be pulled into shared objects from archives
-	_LT_AC_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
-	_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes
-	# This is similar to how AIX traditionally builds its shared libraries.
-	_LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
-      fi
-    fi
-    ;;
-
-  beos*)
-    if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-      _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
-      # Joseph Beckenbach <jrb3@best.com> says some releases of gcc
-      # support --undefined.  This deserves some investigation.  FIXME
-      _LT_AC_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-    else
-      _LT_AC_TAGVAR(ld_shlibs, $1)=no
-    fi
-    ;;
-
-  chorus*)
-    case $cc_basename in
-      *)
-	# FIXME: insert proper C++ library support
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
-	;;
-    esac
-    ;;
-
-  cygwin* | mingw* | pw32*)
-    # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
-    # as there is no search path for DLLs.
-    _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-    _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
-    _LT_AC_TAGVAR(always_export_symbols, $1)=no
-    _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
-
-    if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
-      _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
-      # If the export-symbols file already is a .def file (1st line
-      # is EXPORTS), use it as is; otherwise, prepend...
-      _LT_AC_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
-	cp $export_symbols $output_objdir/$soname.def;
-      else
-	echo EXPORTS > $output_objdir/$soname.def;
-	cat $export_symbols >> $output_objdir/$soname.def;
-      fi~
-      $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
-    else
-      _LT_AC_TAGVAR(ld_shlibs, $1)=no
-    fi
-  ;;
-      darwin* | rhapsody*)
-      _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-      _LT_AC_TAGVAR(hardcode_direct, $1)=no
-      _LT_AC_TAGVAR(hardcode_automatic, $1)=yes
-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
-      _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=''
-      _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
-      _LT_AC_TAGVAR(allow_undefined_flag, $1)="$_lt_dar_allow_undefined"
-      if test "$GXX" = yes ; then
-      output_verbose_link_cmd='echo'
-      _LT_AC_TAGVAR(archive_cmds, $1)="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}"
-      _LT_AC_TAGVAR(module_cmds, $1)="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}"
-      _LT_AC_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}"
-      _LT_AC_TAGVAR(module_expsym_cmds, $1)="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}"
-      if test "$lt_cv_apple_cc_single_mod" != "yes"; then
-        _LT_AC_TAGVAR(archive_cmds, $1)="\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dsymutil}"
-        _LT_AC_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dar_export_syms}${_lt_dsymutil}"
-      fi
-      else
-      case $cc_basename in
-        xlc*)
-         output_verbose_link_cmd='echo'
-          _LT_AC_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj ${wl}-single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $xlcverstring'
-          _LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
-          # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
-          _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj ${wl}-single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $xlcverstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-          _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag  -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-          ;;
-       *)
-         _LT_AC_TAGVAR(ld_shlibs, $1)=no
-          ;;
-      esac
-      fi
-        ;;
-
-  dgux*)
-    case $cc_basename in
-      ec++*)
-	# FIXME: insert proper C++ library support
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
-	;;
-      ghcx*)
-	# Green Hills C++ Compiler
-	# FIXME: insert proper C++ library support
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
-	;;
-      *)
-	# FIXME: insert proper C++ library support
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
-	;;
-    esac
-    ;;
-  freebsd[[12]]*)
-    # C++ shared libraries reported to be fairly broken before switch to ELF
-    _LT_AC_TAGVAR(ld_shlibs, $1)=no
-    ;;
-  freebsd-elf*)
-    _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-    ;;
-  freebsd* | dragonfly*)
-    # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF
-    # conventions
-    _LT_AC_TAGVAR(ld_shlibs, $1)=yes
-    ;;
-  gnu*)
-    ;;
-  hpux9*)
-    _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
-    _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-    _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
-    _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-    _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
-				# but as the default
-				# location of the library.
-
-    case $cc_basename in
-    CC*)
-      # FIXME: insert proper C++ library support
-      _LT_AC_TAGVAR(ld_shlibs, $1)=no
-      ;;
-    aCC*)
-      _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
-      # Commands to make compiler produce verbose output that lists
-      # what "hidden" libraries, object files and flags are used when
-      # linking a shared library.
-      #
-      # There doesn't appear to be a way to prevent this compiler from
-      # explicitly linking system object files so we need to strip them
-      # from the output so that they don't get included in the library
-      # dependencies.
-      output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "[[-]]L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
-      ;;
-    *)
-      if test "$GXX" = yes; then
-        _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -shared -nostdlib -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
-      else
-        # FIXME: insert proper C++ library support
-        _LT_AC_TAGVAR(ld_shlibs, $1)=no
+	# AIX 5 now supports IA64 processor
+	_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
       fi
       ;;
-    esac
-    ;;
-  hpux10*|hpux11*)
-    if test $with_gnu_ld = no; then
-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
-      _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
 
+    amigaos*)
       case $host_cpu in
-      hppa*64*|ia64*) ;;
-      *)
-	_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+      powerpc)
+            # see comment about AmigaOS4 .so support
+            _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+        ;;
+      m68k)
+            # FIXME: we need at least 68020 code to build shared libraries, but
+            # adding the `-m68020' flag to GCC prevents building anything better,
+            # like `-m68040'.
+            _LT_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4'
         ;;
       esac
-    fi
-    case $host_cpu in
-    hppa*64*|ia64*)
-      _LT_AC_TAGVAR(hardcode_direct, $1)=no
-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-      ;;
-    *)
-      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-      _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
-					      # but as the default
-					      # location of the library.
       ;;
-    esac
 
-    case $cc_basename in
-      CC*)
-	# FIXME: insert proper C++ library support
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
+    beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
+      # PIC is the default for these OSes.
+      ;;
+    mingw* | cygwin* | os2* | pw32* | cegcc*)
+      # This hack is so that the source file can tell whether it is being
+      # built for inclusion in a dll (and should export symbols for example).
+      # Although the cygwin gcc ignores -fPIC, still need this for old-style
+      # (--disable-auto-import) libraries
+      m4_if([$1], [GCJ], [],
+	[_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
+      ;;
+    darwin* | rhapsody*)
+      # PIC is the default on this platform
+      # Common symbols not allowed in MH_DYLIB files
+      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'
+      ;;
+    *djgpp*)
+      # DJGPP does not support shared libraries at all
+      _LT_TAGVAR(lt_prog_compiler_pic, $1)=
+      ;;
+    interix[[3-9]]*)
+      # Interix 3.x gcc -fpic/-fPIC options generate broken code.
+      # Instead, we relocate shared libraries at runtime.
+      ;;
+    sysv4*MP*)
+      if test -d /usr/nec; then
+	_LT_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic
+      fi
+      ;;
+    hpux*)
+      # PIC is the default for 64-bit PA HP-UX, but not for 32-bit
+      # PA HP-UX.  On IA64 HP-UX, PIC is the default but the pic flag
+      # sets the default TLS model and affects inlining.
+      case $host_cpu in
+      hppa*64*)
 	;;
-      aCC*)
-	case $host_cpu in
-	hppa*64*)
-	  _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-	  ;;
-	ia64*)
-	  _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-	  ;;
-	*)
-	  _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+      *)
+	_LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+	;;
+      esac
+      ;;
+    *qnx* | *nto*)
+      # QNX uses GNU C++, but need to define -shared option too, otherwise
+      # it will coredump.
+      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared'
+      ;;
+    *)
+      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+      ;;
+    esac
+  else
+    case $host_os in
+      aix[[4-9]]*)
+	# All AIX code is PIC.
+	if test "$host_cpu" = ia64; then
+	  # AIX 5 now supports IA64 processor
+	  _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+	else
+	  _LT_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp'
+	fi
+	;;
+      chorus*)
+	case $cc_basename in
+	cxch68*)
+	  # Green Hills C++ Compiler
+	  # _LT_TAGVAR(lt_prog_compiler_static, $1)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a"
 	  ;;
 	esac
-	# Commands to make compiler produce verbose output that lists
-	# what "hidden" libraries, object files and flags are used when
-	# linking a shared library.
-	#
-	# There doesn't appear to be a way to prevent this compiler from
-	# explicitly linking system object files so we need to strip them
-	# from the output so that they don't get included in the library
-	# dependencies.
-	output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
 	;;
-      *)
-	if test "$GXX" = yes; then
-	  if test $with_gnu_ld = no; then
+      dgux*)
+	case $cc_basename in
+	  ec++*)
+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+	    ;;
+	  ghcx*)
+	    # Green Hills C++ Compiler
+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
+	    ;;
+	  *)
+	    ;;
+	esac
+	;;
+      freebsd* | dragonfly*)
+	# FreeBSD uses GNU C++
+	;;
+      hpux9* | hpux10* | hpux11*)
+	case $cc_basename in
+	  CC*)
+	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	    _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
+	    if test "$host_cpu" != ia64; then
+	      _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
+	    fi
+	    ;;
+	  aCC*)
+	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	    _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
 	    case $host_cpu in
-	    hppa*64*)
-	      _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-	      ;;
-	    ia64*)
-	      _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	    hppa*64*|ia64*)
+	      # +Z the default
 	      ;;
 	    *)
-	      _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	      _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
 	      ;;
 	    esac
-	  fi
-	else
-	  # FIXME: insert proper C++ library support
-	  _LT_AC_TAGVAR(ld_shlibs, $1)=no
-	fi
-	;;
-    esac
-    ;;
-  interix[[3-9]]*)
-    _LT_AC_TAGVAR(hardcode_direct, $1)=no
-    _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-    _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-    _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
-    # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
-    # Instead, shared libraries are loaded at an image base (0x10000000 by
-    # default) and relocated if they conflict, which is a slow very memory
-    # consuming and fragmenting process.  To avoid this, we pick a random,
-    # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
-    # time.  Moving up from 0x10000000 also allows more sbrk(2) space.
-    _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
-    _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
-    ;;
-  irix5* | irix6*)
-    case $cc_basename in
-      CC*)
-	# SGI C++
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-
-	# Archives containing C++ object files must be created using
-	# "CC -ar", where "CC" is the IRIX C++ compiler.  This is
-	# necessary to make sure instantiated templates are included
-	# in the archive.
-	_LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -ar -WR,-u -o $oldlib $oldobjs'
+	    ;;
+	  *)
+	    ;;
+	esac
 	;;
-      *)
-	if test "$GXX" = yes; then
-	  if test "$with_gnu_ld" = no; then
-	    _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-	  else
-	    _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` -o $lib'
-	  fi
-	fi
-	_LT_AC_TAGVAR(link_all_deplibs, $1)=yes
+      interix*)
+	# This is c89, which is MS Visual C++ (no shared libs)
+	# Anyone wants to do a port?
 	;;
-    esac
-    _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-    _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-    ;;
-  linux* | k*bsd*-gnu)
-    case $cc_basename in
-      KCC*)
-	# Kuck and Associates, Inc. (KAI) C++ Compiler
-
-	# KCC will only create a shared library if the output file
-	# ends with ".so" (or ".sl" for HP-UX), so rename the library
-	# to its proper name (with version) after linking.
-	_LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
-	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib'
-	# Commands to make compiler produce verbose output that lists
-	# what "hidden" libraries, object files and flags are used when
-	# linking a shared library.
-	#
-	# There doesn't appear to be a way to prevent this compiler from
-	# explicitly linking system object files so we need to strip them
-	# from the output so that they don't get included in the library
-	# dependencies.
-	output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | grep "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
-
-	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath,$libdir'
-	_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
-
-	# Archives containing C++ object files must be created using
-	# "CC -Bstatic", where "CC" is the KAI C++ compiler.
-	_LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs'
-	;;
-      icpc*)
-	# Intel C++
-	with_gnu_ld=yes
-	# version 8.0 and above of icpc choke on multiply defined symbols
-	# if we add $predep_objects and $postdep_objects, however 7.1 and
-	# earlier do not add the objects themselves.
-	case `$CC -V 2>&1` in
-	*"Version 7."*)
-  	  _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
-  	  _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-	  ;;
-	*)  # Version 8.0 or newer
-	  tmp_idyn=
-	  case $host_cpu in
-	    ia64*) tmp_idyn=' -i_dynamic';;
-	  esac
-  	  _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-	  _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-	  ;;
+      irix5* | irix6* | nonstopux*)
+	case $cc_basename in
+	  CC*)
+	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+	    # CC pic flag -KPIC is the default.
+	    ;;
+	  *)
+	    ;;
 	esac
-	_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-	_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
-	_LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
-	;;
-      pgCC* | pgcpp*)
-        # Portland Group C++ compiler
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
-  	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
-
-	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir'
-	_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
-	_LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
-        ;;
-      cxx*)
-	# Compaq C++
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
-	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname  -o $lib ${wl}-retain-symbols-file $wl$export_symbols'
-
-	runpath_var=LD_RUN_PATH
-	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
-	_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-
-	# Commands to make compiler produce verbose output that lists
-	# what "hidden" libraries, object files and flags are used when
-	# linking a shared library.
-	#
-	# There doesn't appear to be a way to prevent this compiler from
-	# explicitly linking system object files so we need to strip them
-	# from the output so that they don't get included in the library
-	# dependencies.
-	output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
 	;;
-      *)
-	case `$CC -V 2>&1 | sed 5q` in
-	*Sun\ C*)
-	  # Sun C++ 5.9
-	  _LT_AC_TAGVAR(no_undefined_flag, $1)=' -zdefs'
-	  _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-	  _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file ${wl}$export_symbols'
-	  _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-	  _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
-
-	  # Not sure whether something based on
-	  # $CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1
-	  # would be better.
-	  output_verbose_link_cmd='echo'
-
-	  # Archives containing C++ object files must be created using
-	  # "CC -xar", where "CC" is the Sun C++ compiler.  This is
-	  # necessary to make sure instantiated templates are included
-	  # in the archive.
-	  _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs'
-	  ;;
+      linux* | k*bsd*-gnu)
+	case $cc_basename in
+	  KCC*)
+	    # KAI C++ Compiler
+	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,'
+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+	    ;;
+	  ecpc* )
+	    # old Intel C++ for x86_64 which still supported -KPIC.
+	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
+	    ;;
+	  icpc* )
+	    # Intel C++, used to be incompatible with GCC.
+	    # ICC 10 doesn't accept -KPIC any more.
+	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
+	    ;;
+	  pgCC* | pgcpp*)
+	    # Portland Group C++ compiler
+	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic'
+	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+	    ;;
+	  cxx*)
+	    # Compaq C++
+	    # Make sure the PIC flag is empty.  It appears that all Alpha
+	    # Linux and Compaq Tru64 Unix objects are PIC.
+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)=
+	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+	    ;;
+	  xlc* | xlC*)
+	    # IBM XL 8.0 on PPC
+	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-qpic'
+	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-qstaticlink'
+	    ;;
+	  *)
+	    case `$CC -V 2>&1 | sed 5q` in
+	    *Sun\ C*)
+	      # Sun C++ 5.9
+	      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+	      _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+	      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
+	      ;;
+	    esac
+	    ;;
 	esac
 	;;
-    esac
-    ;;
-  lynxos*)
-    # FIXME: insert proper C++ library support
-    _LT_AC_TAGVAR(ld_shlibs, $1)=no
-    ;;
-  m88k*)
-    # FIXME: insert proper C++ library support
-    _LT_AC_TAGVAR(ld_shlibs, $1)=no
-    ;;
-  mvs*)
-    case $cc_basename in
-      cxx*)
-	# FIXME: insert proper C++ library support
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
-	;;
-      *)
-	# FIXME: insert proper C++ library support
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
-	;;
-    esac
-    ;;
-  netbsd*)
-    if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-      _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable  -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags'
-      wlarc=
-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-    fi
-    # Workaround some broken pre-1.5 toolchains
-    output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"'
-    ;;
-  openbsd2*)
-    # C++ shared libraries are fairly broken
-    _LT_AC_TAGVAR(ld_shlibs, $1)=no
-    ;;
-  openbsd*)
-    if test -f /usr/libexec/ld.so; then
-      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-      _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-      if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib'
-	_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
-	_LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
-      fi
-      output_verbose_link_cmd='echo'
-    else
-      _LT_AC_TAGVAR(ld_shlibs, $1)=no
-    fi
-    ;;
-  osf3*)
-    case $cc_basename in
-      KCC*)
-	# Kuck and Associates, Inc. (KAI) C++ Compiler
-
-	# KCC will only create a shared library if the output file
-	# ends with ".so" (or ".sl" for HP-UX), so rename the library
-	# to its proper name (with version) after linking.
-	_LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
-
-	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-	_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-
-	# Archives containing C++ object files must be created using
-	# "CC -Bstatic", where "CC" is the KAI C++ compiler.
-	_LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs'
-
-	;;
-      RCC*)
-	# Rational C++ 2.4.1
-	# FIXME: insert proper C++ library support
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
-	;;
-      cxx*)
-	_LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && echo ${wl}-set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-
-	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-	_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-
-	# Commands to make compiler produce verbose output that lists
-	# what "hidden" libraries, object files and flags are used when
-	# linking a shared library.
-	#
-	# There doesn't appear to be a way to prevent this compiler from
-	# explicitly linking system object files so we need to strip them
-	# from the output so that they don't get included in the library
-	# dependencies.
-	output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
+      lynxos*)
 	;;
-      *)
-	if test "$GXX" = yes && test "$with_gnu_ld" = no; then
-	  _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
-	  _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-
-	  _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-	  _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-
-	  # Commands to make compiler produce verbose output that lists
-	  # what "hidden" libraries, object files and flags are used when
-	  # linking a shared library.
-	  output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"'
-
-	else
-	  # FIXME: insert proper C++ library support
-	  _LT_AC_TAGVAR(ld_shlibs, $1)=no
-	fi
+      m88k*)
 	;;
-    esac
-    ;;
-  osf4* | osf5*)
-    case $cc_basename in
-      KCC*)
-	# Kuck and Associates, Inc. (KAI) C++ Compiler
-
-	# KCC will only create a shared library if the output file
-	# ends with ".so" (or ".sl" for HP-UX), so rename the library
-	# to its proper name (with version) after linking.
-	_LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
-
-	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-	_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-
-	# Archives containing C++ object files must be created using
-	# the KAI C++ compiler.
-	_LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -o $oldlib $oldobjs'
-	;;
-      RCC*)
-	# Rational C++ 2.4.1
-	# FIXME: insert proper C++ library support
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
-	;;
-      cxx*)
-	_LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~
-	  echo "-hidden">> $lib.exp~
-	  $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname -Wl,-input -Wl,$lib.exp  `test -n "$verstring" && echo -set_version	$verstring` -update_registry ${output_objdir}/so_locations -o $lib~
-	  $rm $lib.exp'
-
-	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
-	_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-
-	# Commands to make compiler produce verbose output that lists
-	# what "hidden" libraries, object files and flags are used when
-	# linking a shared library.
-	#
-	# There doesn't appear to be a way to prevent this compiler from
-	# explicitly linking system object files so we need to strip them
-	# from the output so that they don't get included in the library
-	# dependencies.
-	output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
+      mvs*)
+	case $cc_basename in
+	  cxx*)
+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-W c,exportall'
+	    ;;
+	  *)
+	    ;;
+	esac
 	;;
-      *)
-	if test "$GXX" = yes && test "$with_gnu_ld" = no; then
-	  _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
-	 _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-
-	  _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-	  _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-
-	  # Commands to make compiler produce verbose output that lists
-	  # what "hidden" libraries, object files and flags are used when
-	  # linking a shared library.
-	  output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"'
-
-	else
-	  # FIXME: insert proper C++ library support
-	  _LT_AC_TAGVAR(ld_shlibs, $1)=no
-	fi
+      netbsd* | netbsdelf*-gnu)
 	;;
-    esac
-    ;;
-  psos*)
-    # FIXME: insert proper C++ library support
-    _LT_AC_TAGVAR(ld_shlibs, $1)=no
-    ;;
-  sunos4*)
-    case $cc_basename in
-      CC*)
-	# Sun C++ 4.x
-	# FIXME: insert proper C++ library support
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
-	;;
-      lcc*)
-	# Lucid
-	# FIXME: insert proper C++ library support
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
+      *qnx* | *nto*)
+        # QNX uses GNU C++, but need to define -shared option too, otherwise
+        # it will coredump.
+        _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared'
+        ;;
+      osf3* | osf4* | osf5*)
+	case $cc_basename in
+	  KCC*)
+	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,'
+	    ;;
+	  RCC*)
+	    # Rational C++ 2.4.1
+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
+	    ;;
+	  cxx*)
+	    # Digital/Compaq C++
+	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	    # Make sure the PIC flag is empty.  It appears that all Alpha
+	    # Linux and Compaq Tru64 Unix objects are PIC.
+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)=
+	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+	    ;;
+	  *)
+	    ;;
+	esac
 	;;
-      *)
-	# FIXME: insert proper C++ library support
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
+      psos*)
 	;;
-    esac
-    ;;
-  solaris*)
-    case $cc_basename in
-      CC*)
-	# Sun C++ 4.2, 5.x and Centerline C++
-        _LT_AC_TAGVAR(archive_cmds_need_lc,$1)=yes
-	_LT_AC_TAGVAR(no_undefined_flag, $1)=' -zdefs'
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag}  -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-	$CC -G${allow_undefined_flag}  ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'
-
-	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-	_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-	case $host_os in
-	  solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
+      solaris*)
+	case $cc_basename in
+	  CC*)
+	    # Sun C++ 4.2, 5.x and Centerline C++
+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
+	    ;;
+	  gcx*)
+	    # Green Hills C++ Compiler
+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
+	    ;;
 	  *)
-	    # The compiler driver will combine and reorder linker options,
-	    # but understands `-z linker_flag'.
-	    # Supported since Solaris 2.6 (maybe 2.5.1?)
-	    _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract'
 	    ;;
 	esac
-	_LT_AC_TAGVAR(link_all_deplibs, $1)=yes
-
-	output_verbose_link_cmd='echo'
-
-	# Archives containing C++ object files must be created using
-	# "CC -xar", where "CC" is the Sun C++ compiler.  This is
-	# necessary to make sure instantiated templates are included
-	# in the archive.
-	_LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs'
-	;;
-      gcx*)
-	# Green Hills C++ Compiler
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
-
-	# The C++ compiler must be used to create the archive.
-	_LT_AC_TAGVAR(old_archive_cmds, $1)='$CC $LDFLAGS -archive -o $oldlib $oldobjs'
 	;;
-      *)
-	# GNU C++ compiler with Solaris linker
-	if test "$GXX" = yes && test "$with_gnu_ld" = no; then
-	  _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-z ${wl}defs'
-	  if $CC --version | grep -v '^2\.7' > /dev/null; then
-	    _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
-	    _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-		$CC -shared -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'
-
-	    # Commands to make compiler produce verbose output that lists
-	    # what "hidden" libraries, object files and flags are used when
-	    # linking a shared library.
-	    output_verbose_link_cmd="$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep \"\-L\""
-	  else
-	    # g++ 2.7 appears to require `-G' NOT `-shared' on this
-	    # platform.
-	    _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
-	    _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-		$CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'
-
-	    # Commands to make compiler produce verbose output that lists
-	    # what "hidden" libraries, object files and flags are used when
-	    # linking a shared library.
-	    output_verbose_link_cmd="$CC -G $CFLAGS -v conftest.$objext 2>&1 | grep \"\-L\""
-	  fi
-
-	  _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $wl$libdir'
-	  case $host_os in
-	  solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
+      sunos4*)
+	case $cc_basename in
+	  CC*)
+	    # Sun C++ 4.x
+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
+	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+	    ;;
+	  lcc*)
+	    # Lucid
+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
+	    ;;
 	  *)
-	    _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
 	    ;;
-	  esac
-	fi
+	esac
 	;;
-    esac
-    ;;
-  sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*)
-    _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
-    _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-    _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-    runpath_var='LD_RUN_PATH'
-
-    case $cc_basename in
-      CC*)
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+      sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
+	case $cc_basename in
+	  CC*)
+	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+	    ;;
+	esac
 	;;
-      *)
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+      tandem*)
+	case $cc_basename in
+	  NCC*)
+	    # NonStop-UX NCC 3.20
+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+	    ;;
+	  *)
+	    ;;
+	esac
 	;;
-    esac
-    ;;
-  sysv5* | sco3.2v5* | sco5v6*)
-    # Note: We can NOT use -z defs as we might desire, because we do not
-    # link with -lc, and that would cause any symbols used from libc to
-    # always be unresolved, which means just about no library would
-    # ever link correctly.  If we're not using GNU ld we use -z text
-    # though, which does catch some bad symbols but isn't as heavy-handed
-    # as -z defs.
-    # For security reasons, it is highly recommended that you always
-    # use absolute paths for naming shared libraries, and exclude the
-    # DT_RUNPATH tag from executables and libraries.  But doing so
-    # requires that you compile everything twice, which is a pain.
-    # So that behaviour is only enabled if SCOABSPATH is set to a
-    # non-empty value in the environment.  Most likely only useful for
-    # creating official distributions of packages.
-    # This is a hack until libtool officially supports absolute path
-    # names for shared libraries.
-    _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
-    _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs'
-    _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-    _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-    _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`'
-    _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':'
-    _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
-    _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport'
-    runpath_var='LD_RUN_PATH'
-
-    case $cc_basename in
-      CC*)
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
-	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
+      vxworks*)
 	;;
       *)
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
-	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	_LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
 	;;
     esac
-    ;;
-  tandem*)
-    case $cc_basename in
-      NCC*)
-	# NonStop-UX NCC 3.20
-	# FIXME: insert proper C++ library support
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
-	;;
-      *)
-	# FIXME: insert proper C++ library support
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
-	;;
-    esac
-    ;;
-  vxworks*)
-    # FIXME: insert proper C++ library support
-    _LT_AC_TAGVAR(ld_shlibs, $1)=no
-    ;;
-  *)
-    # FIXME: insert proper C++ library support
-    _LT_AC_TAGVAR(ld_shlibs, $1)=no
-    ;;
-esac
-AC_MSG_RESULT([$_LT_AC_TAGVAR(ld_shlibs, $1)])
-test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no
+  fi
+],
+[
+  if test "$GCC" = yes; then
+    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+    _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
 
-_LT_AC_TAGVAR(GCC, $1)="$GXX"
-_LT_AC_TAGVAR(LD, $1)="$LD"
+    case $host_os in
+      aix*)
+      # All AIX code is PIC.
+      if test "$host_cpu" = ia64; then
+	# AIX 5 now supports IA64 processor
+	_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+      fi
+      ;;
 
-AC_LIBTOOL_POSTDEP_PREDEP($1)
-AC_LIBTOOL_PROG_COMPILER_PIC($1)
-AC_LIBTOOL_PROG_CC_C_O($1)
-AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1)
-AC_LIBTOOL_PROG_LD_SHLIBS($1)
-AC_LIBTOOL_SYS_DYNAMIC_LINKER($1)
-AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1)
+    amigaos*)
+      case $host_cpu in
+      powerpc)
+            # see comment about AmigaOS4 .so support
+            _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+        ;;
+      m68k)
+            # FIXME: we need at least 68020 code to build shared libraries, but
+            # adding the `-m68020' flag to GCC prevents building anything better,
+            # like `-m68040'.
+            _LT_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4'
+        ;;
+      esac
+      ;;
 
-AC_LIBTOOL_CONFIG($1)
+    beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
+      # PIC is the default for these OSes.
+      ;;
 
-AC_LANG_POP
-CC=$lt_save_CC
-LDCXX=$LD
-LD=$lt_save_LD
-GCC=$lt_save_GCC
-with_gnu_ldcxx=$with_gnu_ld
-with_gnu_ld=$lt_save_with_gnu_ld
-lt_cv_path_LDCXX=$lt_cv_path_LD
-lt_cv_path_LD=$lt_save_path_LD
-lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld
-lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld
-])# AC_LIBTOOL_LANG_CXX_CONFIG
+    mingw* | cygwin* | pw32* | os2* | cegcc*)
+      # This hack is so that the source file can tell whether it is being
+      # built for inclusion in a dll (and should export symbols for example).
+      # Although the cygwin gcc ignores -fPIC, still need this for old-style
+      # (--disable-auto-import) libraries
+      m4_if([$1], [GCJ], [],
+	[_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
+      ;;
 
-# AC_LIBTOOL_POSTDEP_PREDEP([TAGNAME])
-# ------------------------------------
-# Figure out "hidden" library dependencies from verbose
-# compiler output when linking a shared library.
-# Parse the compiler output and extract the necessary
-# objects, libraries and library flags.
-AC_DEFUN([AC_LIBTOOL_POSTDEP_PREDEP],
-[AC_REQUIRE([LT_AC_PROG_SED])dnl
-dnl we can't use the lt_simple_compile_test_code here,
-dnl because it contains code intended for an executable,
-dnl not a library.  It's possible we should let each
-dnl tag define a new lt_????_link_test_code variable,
-dnl but it's only used here...
-ifelse([$1],[],[cat > conftest.$ac_ext <<EOF
-int a;
-void foo (void) { a = 0; }
-EOF
-],[$1],[CXX],[cat > conftest.$ac_ext <<EOF
-class Foo
-{
-public:
-  Foo (void) { a = 0; }
-private:
-  int a;
-};
-EOF
-],[$1],[F77],[cat > conftest.$ac_ext <<EOF
-      subroutine foo
-      implicit none
-      integer*4 a
-      a=0
-      return
-      end
-EOF
-],[$1],[GCJ],[cat > conftest.$ac_ext <<EOF
-public class foo {
-  private int a;
-  public void bar (void) {
-    a = 0;
-  }
-};
-EOF
-])
-dnl Parse the compiler output and extract the necessary
-dnl objects, libraries and library flags.
-if AC_TRY_EVAL(ac_compile); then
-  # Parse the compiler output and extract the necessary
-  # objects, libraries and library flags.
+    darwin* | rhapsody*)
+      # PIC is the default on this platform
+      # Common symbols not allowed in MH_DYLIB files
+      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'
+      ;;
 
-  # Sentinel used to keep track of whether or not we are before
-  # the conftest object file.
-  pre_test_object_deps_done=no
+    hpux*)
+      # PIC is the default for 64-bit PA HP-UX, but not for 32-bit
+      # PA HP-UX.  On IA64 HP-UX, PIC is the default but the pic flag
+      # sets the default TLS model and affects inlining.
+      case $host_cpu in
+      hppa*64*)
+	# +Z the default
+	;;
+      *)
+	_LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+	;;
+      esac
+      ;;
 
-  # The `*' in the case matches for architectures that use `case' in
-  # $output_verbose_cmd can trigger glob expansion during the loop
-  # eval without this substitution.
-  output_verbose_link_cmd=`$echo "X$output_verbose_link_cmd" | $Xsed -e "$no_glob_subst"`
+    interix[[3-9]]*)
+      # Interix 3.x gcc -fpic/-fPIC options generate broken code.
+      # Instead, we relocate shared libraries at runtime.
+      ;;
 
-  for p in `eval $output_verbose_link_cmd`; do
-    case $p in
+    msdosdjgpp*)
+      # Just because we use GCC doesn't mean we suddenly get shared libraries
+      # on systems that don't support them.
+      _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
+      enable_shared=no
+      ;;
 
-    -L* | -R* | -l*)
-       # Some compilers place space between "-{L,R}" and the path.
-       # Remove the space.
-       if test $p = "-L" \
-	  || test $p = "-R"; then
-	 prev=$p
-	 continue
-       else
-	 prev=
-       fi
+    *nto* | *qnx*)
+      # QNX uses GNU C++, but need to define -shared option too, otherwise
+      # it will coredump.
+      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared'
+      ;;
 
-       if test "$pre_test_object_deps_done" = no; then
-	 case $p in
-	 -L* | -R*)
-	   # Internal compiler library paths should come after those
-	   # provided the user.  The postdeps already come after the
-	   # user supplied libs so there is no need to process them.
-	   if test -z "$_LT_AC_TAGVAR(compiler_lib_search_path, $1)"; then
-	     _LT_AC_TAGVAR(compiler_lib_search_path, $1)="${prev}${p}"
-	   else
-	     _LT_AC_TAGVAR(compiler_lib_search_path, $1)="${_LT_AC_TAGVAR(compiler_lib_search_path, $1)} ${prev}${p}"
-	   fi
-	   ;;
-	 # The "-l" case would never come before the object being
-	 # linked, so don't bother handling this case.
-	 esac
-       else
-	 if test -z "$_LT_AC_TAGVAR(postdeps, $1)"; then
-	   _LT_AC_TAGVAR(postdeps, $1)="${prev}${p}"
-	 else
-	   _LT_AC_TAGVAR(postdeps, $1)="${_LT_AC_TAGVAR(postdeps, $1)} ${prev}${p}"
-	 fi
-       fi
-       ;;
+    sysv4*MP*)
+      if test -d /usr/nec; then
+	_LT_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic
+      fi
+      ;;
 
-    *.$objext)
-       # This assumes that the test object file only shows up
-       # once in the compiler output.
-       if test "$p" = "conftest.$objext"; then
-	 pre_test_object_deps_done=yes
-	 continue
-       fi
+    *)
+      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+      ;;
+    esac
+  else
+    # PORTME Check for flag to pass linker flags through the system compiler.
+    case $host_os in
+    aix*)
+      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+      if test "$host_cpu" = ia64; then
+	# AIX 5 now supports IA64 processor
+	_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+      else
+	_LT_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp'
+      fi
+      ;;
 
-       if test "$pre_test_object_deps_done" = no; then
-	 if test -z "$_LT_AC_TAGVAR(predep_objects, $1)"; then
-	   _LT_AC_TAGVAR(predep_objects, $1)="$p"
-	 else
-	   _LT_AC_TAGVAR(predep_objects, $1)="$_LT_AC_TAGVAR(predep_objects, $1) $p"
-	 fi
-       else
-	 if test -z "$_LT_AC_TAGVAR(postdep_objects, $1)"; then
-	   _LT_AC_TAGVAR(postdep_objects, $1)="$p"
-	 else
-	   _LT_AC_TAGVAR(postdep_objects, $1)="$_LT_AC_TAGVAR(postdep_objects, $1) $p"
-	 fi
-       fi
-       ;;
+    mingw* | cygwin* | pw32* | os2* | cegcc*)
+      # This hack is so that the source file can tell whether it is being
+      # built for inclusion in a dll (and should export symbols for example).
+      m4_if([$1], [GCJ], [],
+	[_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
+      ;;
 
-    *) ;; # Ignore the rest.
+    hpux9* | hpux10* | hpux11*)
+      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+      # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
+      # not for PA HP-UX.
+      case $host_cpu in
+      hppa*64*|ia64*)
+	# +Z the default
+	;;
+      *)
+	_LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
+	;;
+      esac
+      # Is there a better lt_prog_compiler_static that works with the bundled CC?
+      _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
+      ;;
 
-    esac
-  done
+    irix5* | irix6* | nonstopux*)
+      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+      # PIC (with -KPIC) is the default.
+      _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+      ;;
 
-  # Clean up.
-  rm -f a.out a.exe
-else
-  echo "libtool.m4: error: problem compiling $1 test program"
-fi
+    linux* | k*bsd*-gnu)
+      case $cc_basename in
+      # old Intel for x86_64 which still supported -KPIC.
+      ecc*)
+	_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	_LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+	_LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
+        ;;
+      # icc used to be incompatible with GCC.
+      # ICC 10 doesn't accept -KPIC any more.
+      icc* | ifort*)
+	_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	_LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+	_LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
+        ;;
+      # Lahey Fortran 8.1.
+      lf95*)
+	_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	_LT_TAGVAR(lt_prog_compiler_pic, $1)='--shared'
+	_LT_TAGVAR(lt_prog_compiler_static, $1)='--static'
+	;;
+      pgcc* | pgf77* | pgf90* | pgf95*)
+        # Portland Group compilers (*not* the Pentium gcc compiler,
+	# which looks to be a dead project)
+	_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	_LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic'
+	_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+        ;;
+      ccc*)
+        _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+        # All Alpha code is PIC.
+        _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+        ;;
+      xl*)
+	# IBM XL C 8.0/Fortran 10.1 on PPC
+	_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	_LT_TAGVAR(lt_prog_compiler_pic, $1)='-qpic'
+	_LT_TAGVAR(lt_prog_compiler_static, $1)='-qstaticlink'
+	;;
+      *)
+	case `$CC -V 2>&1 | sed 5q` in
+	*Sun\ C*)
+	  # Sun C 5.9
+	  _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+	  _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+	  _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	  ;;
+	*Sun\ F*)
+	  # Sun Fortran 8.3 passes all unrecognized flags to the linker
+	  _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+	  _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+	  _LT_TAGVAR(lt_prog_compiler_wl, $1)=''
+	  ;;
+	esac
+	;;
+      esac
+      ;;
 
-$rm -f confest.$objext
+    newsos6)
+      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+      _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+      ;;
 
-_LT_AC_TAGVAR(compiler_lib_search_dirs, $1)=
-if test -n "$_LT_AC_TAGVAR(compiler_lib_search_path, $1)"; then
-  _LT_AC_TAGVAR(compiler_lib_search_dirs, $1)=`echo " ${_LT_AC_TAGVAR(compiler_lib_search_path, $1)}" | ${SED} -e 's! -L! !g' -e 's!^ !!'`
-fi
+    *nto* | *qnx*)
+      # QNX uses GNU C++, but need to define -shared option too, otherwise
+      # it will coredump.
+      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared'
+      ;;
 
-# PORTME: override above test on systems where it is broken
-ifelse([$1],[CXX],
-[case $host_os in
-interix[[3-9]]*)
-  # Interix 3.5 installs completely hosed .la files for C++, so rather than
-  # hack all around it, let's just trust "g++" to DTRT.
-  _LT_AC_TAGVAR(predep_objects,$1)=
-  _LT_AC_TAGVAR(postdep_objects,$1)=
-  _LT_AC_TAGVAR(postdeps,$1)=
-  ;;
+    osf3* | osf4* | osf5*)
+      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+      # All OSF/1 code is PIC.
+      _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+      ;;
 
-linux*)
-  case `$CC -V 2>&1 | sed 5q` in
-  *Sun\ C*)
-    # Sun C++ 5.9
-    #
-    # The more standards-conforming stlport4 library is
-    # incompatible with the Cstd library. Avoid specifying
-    # it if it's in CXXFLAGS. Ignore libCrun as
-    # -library=stlport4 depends on it.
-    case " $CXX $CXXFLAGS " in
-    *" -library=stlport4 "*)
-      solaris_use_stlport4=yes
+    rdos*)
+      _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
       ;;
-    esac
-    if test "$solaris_use_stlport4" != yes; then
-      _LT_AC_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun'
-    fi
-    ;;
-  esac
-  ;;
 
-solaris*)
-  case $cc_basename in
-  CC*)
-    # The more standards-conforming stlport4 library is
-    # incompatible with the Cstd library. Avoid specifying
-    # it if it's in CXXFLAGS. Ignore libCrun as
-    # -library=stlport4 depends on it.
-    case " $CXX $CXXFLAGS " in
-    *" -library=stlport4 "*)
-      solaris_use_stlport4=yes
+    solaris*)
+      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+      _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+      case $cc_basename in
+      f77* | f90* | f95*)
+	_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ';;
+      *)
+	_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,';;
+      esac
       ;;
-    esac
 
-    # Adding this requires a known-good setup of shared libraries for
-    # Sun compiler versions before 5.6, else PIC objects from an old
-    # archive will be linked into the output, leading to subtle bugs.
-    if test "$solaris_use_stlport4" != yes; then
-      _LT_AC_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun'
-    fi
-    ;;
-  esac
-  ;;
-esac
-])
-case " $_LT_AC_TAGVAR(postdeps, $1) " in
-*" -lc "*) _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no ;;
-esac
-])# AC_LIBTOOL_POSTDEP_PREDEP
-
-# AC_LIBTOOL_LANG_F77_CONFIG
-# --------------------------
-# Ensure that the configuration vars for the C compiler are
-# suitably defined.  Those variables are subsequently used by
-# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
-AC_DEFUN([AC_LIBTOOL_LANG_F77_CONFIG], [_LT_AC_LANG_F77_CONFIG(F77)])
-AC_DEFUN([_LT_AC_LANG_F77_CONFIG],
-[AC_REQUIRE([AC_PROG_F77])
-AC_LANG_PUSH(Fortran 77)
-
-_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-_LT_AC_TAGVAR(allow_undefined_flag, $1)=
-_LT_AC_TAGVAR(always_export_symbols, $1)=no
-_LT_AC_TAGVAR(archive_expsym_cmds, $1)=
-_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=
-_LT_AC_TAGVAR(hardcode_direct, $1)=no
-_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=
-_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
-_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
-_LT_AC_TAGVAR(hardcode_minus_L, $1)=no
-_LT_AC_TAGVAR(hardcode_automatic, $1)=no
-_LT_AC_TAGVAR(module_cmds, $1)=
-_LT_AC_TAGVAR(module_expsym_cmds, $1)=
-_LT_AC_TAGVAR(link_all_deplibs, $1)=unknown
-_LT_AC_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
-_LT_AC_TAGVAR(no_undefined_flag, $1)=
-_LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
-_LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=no
+    sunos4*)
+      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
+      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
+      _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+      ;;
 
-# Source file extension for f77 test sources.
-ac_ext=f
+    sysv4 | sysv4.2uw2* | sysv4.3*)
+      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+      _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+      ;;
 
-# Object file extension for compiled f77 test sources.
-objext=o
-_LT_AC_TAGVAR(objext, $1)=$objext
+    sysv4*MP*)
+      if test -d /usr/nec ;then
+	_LT_TAGVAR(lt_prog_compiler_pic, $1)='-Kconform_pic'
+	_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+      fi
+      ;;
 
-# Code to be used in simple compile tests
-lt_simple_compile_test_code="\
-      subroutine t
-      return
-      end
-"
+    sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
+      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+      _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+      ;;
 
-# Code to be used in simple link tests
-lt_simple_link_test_code="\
-      program t
-      end
-"
+    unicos*)
+      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+      _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
+      ;;
 
-# ltmain only uses $CC for tagged configurations so make sure $CC is set.
-_LT_AC_SYS_COMPILER
+    uts4*)
+      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
+      _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+      ;;
 
-# save warnings/boilerplate of simple test code
-_LT_COMPILER_BOILERPLATE
-_LT_LINKER_BOILERPLATE
+    *)
+      _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
+      ;;
+    esac
+  fi
+])
+case $host_os in
+  # For platforms which do not support PIC, -DPIC is meaningless:
+  *djgpp*)
+    _LT_TAGVAR(lt_prog_compiler_pic, $1)=
+    ;;
+  *)
+    _LT_TAGVAR(lt_prog_compiler_pic, $1)="$_LT_TAGVAR(lt_prog_compiler_pic, $1)@&t@m4_if([$1],[],[ -DPIC],[m4_if([$1],[CXX],[ -DPIC],[])])"
+    ;;
+esac
+AC_MSG_RESULT([$_LT_TAGVAR(lt_prog_compiler_pic, $1)])
+_LT_TAGDECL([wl], [lt_prog_compiler_wl], [1],
+	[How to pass a linker flag through the compiler])
 
-# Allow CC to be a program name with arguments.
-lt_save_CC="$CC"
-CC=${F77-"f77"}
-compiler=$CC
-_LT_AC_TAGVAR(compiler, $1)=$CC
-_LT_CC_BASENAME([$compiler])
+#
+# Check to make sure the PIC flag actually works.
+#
+if test -n "$_LT_TAGVAR(lt_prog_compiler_pic, $1)"; then
+  _LT_COMPILER_OPTION([if $compiler PIC flag $_LT_TAGVAR(lt_prog_compiler_pic, $1) works],
+    [_LT_TAGVAR(lt_cv_prog_compiler_pic_works, $1)],
+    [$_LT_TAGVAR(lt_prog_compiler_pic, $1)@&t@m4_if([$1],[],[ -DPIC],[m4_if([$1],[CXX],[ -DPIC],[])])], [],
+    [case $_LT_TAGVAR(lt_prog_compiler_pic, $1) in
+     "" | " "*) ;;
+     *) _LT_TAGVAR(lt_prog_compiler_pic, $1)=" $_LT_TAGVAR(lt_prog_compiler_pic, $1)" ;;
+     esac],
+    [_LT_TAGVAR(lt_prog_compiler_pic, $1)=
+     _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no])
+fi
+_LT_TAGDECL([pic_flag], [lt_prog_compiler_pic], [1],
+	[Additional compiler flags for building library objects])
 
-AC_MSG_CHECKING([if libtool supports shared libraries])
-AC_MSG_RESULT([$can_build_shared])
+#
+# Check to make sure the static flag actually works.
+#
+wl=$_LT_TAGVAR(lt_prog_compiler_wl, $1) eval lt_tmp_static_flag=\"$_LT_TAGVAR(lt_prog_compiler_static, $1)\"
+_LT_LINKER_OPTION([if $compiler static flag $lt_tmp_static_flag works],
+  _LT_TAGVAR(lt_cv_prog_compiler_static_works, $1),
+  $lt_tmp_static_flag,
+  [],
+  [_LT_TAGVAR(lt_prog_compiler_static, $1)=])
+_LT_TAGDECL([link_static_flag], [lt_prog_compiler_static], [1],
+	[Compiler flag to prevent dynamic linking])
+])# _LT_COMPILER_PIC
 
-AC_MSG_CHECKING([whether to build shared libraries])
-test "$can_build_shared" = "no" && enable_shared=no
 
-# On AIX, shared libraries and static libraries use the same namespace, and
-# are all built from PIC.
-case $host_os in
-aix3*)
-  test "$enable_shared" = yes && enable_static=no
-  if test -n "$RANLIB"; then
-    archive_cmds="$archive_cmds~\$RANLIB \$lib"
-    postinstall_cmds='$RANLIB $lib'
-  fi
+# _LT_LINKER_SHLIBS([TAGNAME])
+# ----------------------------
+# See if the linker supports building shared libraries.
+m4_defun([_LT_LINKER_SHLIBS],
+[AC_REQUIRE([LT_PATH_LD])dnl
+AC_REQUIRE([LT_PATH_NM])dnl
+m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+m4_require([_LT_DECL_EGREP])dnl
+m4_require([_LT_DECL_SED])dnl
+m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl
+m4_require([_LT_TAG_COMPILER])dnl
+AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries])
+m4_if([$1], [CXX], [
+  _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+  case $host_os in
+  aix[[4-9]]*)
+    # If we're using GNU nm, then we don't want the "-C" option.
+    # -C means demangle to AIX nm, but means don't demangle with GNU nm
+    if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
+      _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+    else
+      _LT_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+    fi
+    ;;
+  pw32*)
+    _LT_TAGVAR(export_symbols_cmds, $1)="$ltdll_cmds"
   ;;
-aix[[4-9]]*)
-  if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
-    test "$enable_shared" = yes && enable_static=no
-  fi
+  cygwin* | mingw* | cegcc*)
+    _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;/^.*[[ ]]__nm__/s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.* //'\'' | sort | uniq > $export_symbols'
   ;;
-esac
-AC_MSG_RESULT([$enable_shared])
-
-AC_MSG_CHECKING([whether to build static libraries])
-# Make sure either enable_shared or enable_static is yes.
-test "$enable_shared" = yes || enable_static=yes
-AC_MSG_RESULT([$enable_static])
-
-_LT_AC_TAGVAR(GCC, $1)="$G77"
-_LT_AC_TAGVAR(LD, $1)="$LD"
-
-AC_LIBTOOL_PROG_COMPILER_PIC($1)
-AC_LIBTOOL_PROG_CC_C_O($1)
-AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1)
-AC_LIBTOOL_PROG_LD_SHLIBS($1)
-AC_LIBTOOL_SYS_DYNAMIC_LINKER($1)
-AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1)
+  linux* | k*bsd*-gnu)
+    _LT_TAGVAR(link_all_deplibs, $1)=no
+  ;;
+  *)
+    _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+  ;;
+  esac
+  _LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*']
+], [
+  runpath_var=
+  _LT_TAGVAR(allow_undefined_flag, $1)=
+  _LT_TAGVAR(always_export_symbols, $1)=no
+  _LT_TAGVAR(archive_cmds, $1)=
+  _LT_TAGVAR(archive_expsym_cmds, $1)=
+  _LT_TAGVAR(compiler_needs_object, $1)=no
+  _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
+  _LT_TAGVAR(export_dynamic_flag_spec, $1)=
+  _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+  _LT_TAGVAR(hardcode_automatic, $1)=no
+  _LT_TAGVAR(hardcode_direct, $1)=no
+  _LT_TAGVAR(hardcode_direct_absolute, $1)=no
+  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
+  _LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
+  _LT_TAGVAR(hardcode_libdir_separator, $1)=
+  _LT_TAGVAR(hardcode_minus_L, $1)=no
+  _LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
+  _LT_TAGVAR(inherit_rpath, $1)=no
+  _LT_TAGVAR(link_all_deplibs, $1)=unknown
+  _LT_TAGVAR(module_cmds, $1)=
+  _LT_TAGVAR(module_expsym_cmds, $1)=
+  _LT_TAGVAR(old_archive_from_new_cmds, $1)=
+  _LT_TAGVAR(old_archive_from_expsyms_cmds, $1)=
+  _LT_TAGVAR(thread_safe_flag_spec, $1)=
+  _LT_TAGVAR(whole_archive_flag_spec, $1)=
+  # include_expsyms should be a list of space-separated symbols to be *always*
+  # included in the symbol list
+  _LT_TAGVAR(include_expsyms, $1)=
+  # exclude_expsyms can be an extended regexp of symbols to exclude
+  # it will be wrapped by ` (' and `)$', so one must not match beginning or
+  # end of line.  Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
+  # as well as any symbol that contains `d'.
+  _LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*']
+  # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
+  # platforms (ab)use it in PIC code, but their linkers get confused if
+  # the symbol is explicitly referenced.  Since portable code cannot
+  # rely on this symbol name, it's probably fine to never include it in
+  # preloaded symbol tables.
+  # Exclude shared library initialization/finalization symbols.
+dnl Note also adjust exclude_expsyms for C++ above.
+  extract_expsyms_cmds=
 
-AC_LIBTOOL_CONFIG($1)
+  case $host_os in
+  cygwin* | mingw* | pw32* | cegcc*)
+    # FIXME: the MSVC++ port hasn't been tested in a loooong time
+    # When not using gcc, we currently assume that we are using
+    # Microsoft Visual C++.
+    if test "$GCC" != yes; then
+      with_gnu_ld=no
+    fi
+    ;;
+  interix*)
+    # we just hope/assume this is gcc and not c89 (= MSVC++)
+    with_gnu_ld=yes
+    ;;
+  openbsd*)
+    with_gnu_ld=no
+    ;;
+  linux* | k*bsd*-gnu)
+    _LT_TAGVAR(link_all_deplibs, $1)=no
+    ;;
+  esac
 
-AC_LANG_POP
-CC="$lt_save_CC"
-])# AC_LIBTOOL_LANG_F77_CONFIG
+  _LT_TAGVAR(ld_shlibs, $1)=yes
+  if test "$with_gnu_ld" = yes; then
+    # If archive_cmds runs LD, not CC, wlarc should be empty
+    wlarc='${wl}'
 
+    # Set some defaults for GNU ld with shared library support. These
+    # are reset later if shared libraries are not supported. Putting them
+    # here allows them to be overridden if necessary.
+    runpath_var=LD_RUN_PATH
+    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+    _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+    # ancient GNU ld didn't support --whole-archive et. al.
+    if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then
+      _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+    else
+      _LT_TAGVAR(whole_archive_flag_spec, $1)=
+    fi
+    supports_anon_versioning=no
+    case `$LD -v 2>&1` in
+      *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.10.*) ;; # catch versions < 2.11
+      *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
+      *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
+      *\ 2.11.*) ;; # other 2.11 versions
+      *) supports_anon_versioning=yes ;;
+    esac
 
-# AC_LIBTOOL_LANG_GCJ_CONFIG
-# --------------------------
-# Ensure that the configuration vars for the C compiler are
-# suitably defined.  Those variables are subsequently used by
-# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
-AC_DEFUN([AC_LIBTOOL_LANG_GCJ_CONFIG], [_LT_AC_LANG_GCJ_CONFIG(GCJ)])
-AC_DEFUN([_LT_AC_LANG_GCJ_CONFIG],
-[AC_LANG_SAVE
+    # See if GNU ld supports shared libraries.
+    case $host_os in
+    aix[[3-9]]*)
+      # On AIX/PPC, the GNU linker is very broken
+      if test "$host_cpu" != ia64; then
+	_LT_TAGVAR(ld_shlibs, $1)=no
+	cat <<_LT_EOF 1>&2
 
-# Source file extension for Java test sources.
-ac_ext=java
+*** Warning: the GNU linker, at least up to release 2.9.1, is reported
+*** to be unable to reliably create shared libraries on AIX.
+*** Therefore, libtool is disabling shared libraries support.  If you
+*** really care for shared libraries, you may want to modify your PATH
+*** so that a non-GNU linker is found, and then restart.
 
-# Object file extension for compiled Java test sources.
-objext=o
-_LT_AC_TAGVAR(objext, $1)=$objext
+_LT_EOF
+      fi
+      ;;
 
-# Code to be used in simple compile tests
-lt_simple_compile_test_code="class foo {}"
+    amigaos*)
+      case $host_cpu in
+      powerpc)
+            # see comment about AmigaOS4 .so support
+            _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+            _LT_TAGVAR(archive_expsym_cmds, $1)=''
+        ;;
+      m68k)
+            _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
+            _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+            _LT_TAGVAR(hardcode_minus_L, $1)=yes
+        ;;
+      esac
+      ;;
 
-# Code to be used in simple link tests
-lt_simple_link_test_code='public class conftest { public static void main(String[[]] argv) {}; }'
+    beos*)
+      if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+	_LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+	# Joseph Beckenbach <jrb3@best.com> says some releases of gcc
+	# support --undefined.  This deserves some investigation.  FIXME
+	_LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+      else
+	_LT_TAGVAR(ld_shlibs, $1)=no
+      fi
+      ;;
 
-# ltmain only uses $CC for tagged configurations so make sure $CC is set.
-_LT_AC_SYS_COMPILER
+    cygwin* | mingw* | pw32* | cegcc*)
+      # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
+      # as there is no search path for DLLs.
+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+      _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+      _LT_TAGVAR(always_export_symbols, $1)=no
+      _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+      _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/'\'' | $SED -e '\''/^[[AITW]][[ ]]/s/.*[[ ]]//'\'' | sort | uniq > $export_symbols'
 
-# save warnings/boilerplate of simple test code
-_LT_COMPILER_BOILERPLATE
-_LT_LINKER_BOILERPLATE
+      if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
+        _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+	# If the export-symbols file already is a .def file (1st line
+	# is EXPORTS), use it as is; otherwise, prepend...
+	_LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
+	  cp $export_symbols $output_objdir/$soname.def;
+	else
+	  echo EXPORTS > $output_objdir/$soname.def;
+	  cat $export_symbols >> $output_objdir/$soname.def;
+	fi~
+	$CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+      else
+	_LT_TAGVAR(ld_shlibs, $1)=no
+      fi
+      ;;
 
-# Allow CC to be a program name with arguments.
-lt_save_CC="$CC"
-CC=${GCJ-"gcj"}
-compiler=$CC
-_LT_AC_TAGVAR(compiler, $1)=$CC
-_LT_CC_BASENAME([$compiler])
-_LT_AC_TAGVAR(LD, $1)="$LD"
+    interix[[3-9]]*)
+      _LT_TAGVAR(hardcode_direct, $1)=no
+      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+      _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+      # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
+      # Instead, shared libraries are loaded at an image base (0x10000000 by
+      # default) and relocated if they conflict, which is a slow very memory
+      # consuming and fragmenting process.  To avoid this, we pick a random,
+      # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
+      # time.  Moving up from 0x10000000 also allows more sbrk(2) space.
+      _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+      _LT_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+      ;;
 
-# GCJ did not exist at the time GCC didn't implicitly link libc in.
-_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
+    gnu* | linux* | tpf* | k*bsd*-gnu)
+      tmp_diet=no
+      if test "$host_os" = linux-dietlibc; then
+	case $cc_basename in
+	  diet\ *) tmp_diet=yes;;	# linux-dietlibc with static linking (!diet-dyn)
+	esac
+      fi
+      if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \
+	 && test "$tmp_diet" = no
+      then
+	tmp_addflag=
+	tmp_sharedflag='-shared'
+	case $cc_basename,$host_cpu in
+        pgcc*)				# Portland Group C compiler
+	  _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
+	  tmp_addflag=' $pic_flag'
+	  ;;
+	pgf77* | pgf90* | pgf95*)	# Portland Group f77 and f90 compilers
+	  _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
+	  tmp_addflag=' $pic_flag -Mnomain' ;;
+	ecc*,ia64* | icc*,ia64*)	# Intel C compiler on ia64
+	  tmp_addflag=' -i_dynamic' ;;
+	efc*,ia64* | ifort*,ia64*)	# Intel Fortran compiler on ia64
+	  tmp_addflag=' -i_dynamic -nofor_main' ;;
+	ifc* | ifort*)			# Intel Fortran compiler
+	  tmp_addflag=' -nofor_main' ;;
+	lf95*)				# Lahey Fortran 8.1
+	  _LT_TAGVAR(whole_archive_flag_spec, $1)=
+	  tmp_sharedflag='--shared' ;;
+	xl[[cC]]*)			# IBM XL C 8.0 on PPC (deal with xlf below)
+	  tmp_sharedflag='-qmkshrobj'
+	  tmp_addflag= ;;
+	esac
+	case `$CC -V 2>&1 | sed 5q` in
+	*Sun\ C*)			# Sun C 5.9
+	  _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
+	  _LT_TAGVAR(compiler_needs_object, $1)=yes
+	  tmp_sharedflag='-G' ;;
+	*Sun\ F*)			# Sun Fortran 8.3
+	  tmp_sharedflag='-G' ;;
+	esac
+	_LT_TAGVAR(archive_cmds, $1)='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
 
-_LT_AC_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
+        if test "x$supports_anon_versioning" = xyes; then
+          _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~
+	    cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+	    echo "local: *; };" >> $output_objdir/$libname.ver~
+	    $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
+        fi
 
-AC_LIBTOOL_PROG_COMPILER_NO_RTTI($1)
-AC_LIBTOOL_PROG_COMPILER_PIC($1)
-AC_LIBTOOL_PROG_CC_C_O($1)
-AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1)
-AC_LIBTOOL_PROG_LD_SHLIBS($1)
-AC_LIBTOOL_SYS_DYNAMIC_LINKER($1)
-AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1)
+	case $cc_basename in
+	xlf*)
+	  # IBM XL Fortran 10.1 on PPC cannot create shared libs itself
+	  _LT_TAGVAR(whole_archive_flag_spec, $1)='--whole-archive$convenience --no-whole-archive'
+	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
+	  _LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='-rpath $libdir'
+	  _LT_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $compiler_flags -soname $soname -o $lib'
+	  if test "x$supports_anon_versioning" = xyes; then
+	    _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~
+	      cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+	      echo "local: *; };" >> $output_objdir/$libname.ver~
+	      $LD -shared $libobjs $deplibs $compiler_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib'
+	  fi
+	  ;;
+	esac
+      else
+        _LT_TAGVAR(ld_shlibs, $1)=no
+      fi
+      ;;
 
-AC_LIBTOOL_CONFIG($1)
+    netbsd* | netbsdelf*-gnu)
+      if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+	_LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
+	wlarc=
+      else
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+      fi
+      ;;
 
-AC_LANG_RESTORE
-CC="$lt_save_CC"
-])# AC_LIBTOOL_LANG_GCJ_CONFIG
+    solaris*)
+      if $LD -v 2>&1 | $GREP 'BFD 2\.8' > /dev/null; then
+	_LT_TAGVAR(ld_shlibs, $1)=no
+	cat <<_LT_EOF 1>&2
 
+*** Warning: The releases 2.8.* of the GNU linker cannot reliably
+*** create shared libraries on Solaris systems.  Therefore, libtool
+*** is disabling shared libraries support.  We urge you to upgrade GNU
+*** binutils to release 2.9.1 or newer.  Another option is to modify
+*** your PATH or compiler configuration so that the native linker is
+*** used, and then restart.
 
-# AC_LIBTOOL_LANG_RC_CONFIG
-# -------------------------
-# Ensure that the configuration vars for the Windows resource compiler are
-# suitably defined.  Those variables are subsequently used by
-# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
-AC_DEFUN([AC_LIBTOOL_LANG_RC_CONFIG], [_LT_AC_LANG_RC_CONFIG(RC)])
-AC_DEFUN([_LT_AC_LANG_RC_CONFIG],
-[AC_LANG_SAVE
-
-# Source file extension for RC test sources.
-ac_ext=rc
-
-# Object file extension for compiled RC test sources.
-objext=o
-_LT_AC_TAGVAR(objext, $1)=$objext
-
-# Code to be used in simple compile tests
-lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }'
-
-# Code to be used in simple link tests
-lt_simple_link_test_code="$lt_simple_compile_test_code"
-
-# ltmain only uses $CC for tagged configurations so make sure $CC is set.
-_LT_AC_SYS_COMPILER
-
-# save warnings/boilerplate of simple test code
-_LT_COMPILER_BOILERPLATE
-_LT_LINKER_BOILERPLATE
-
-# Allow CC to be a program name with arguments.
-lt_save_CC="$CC"
-CC=${RC-"windres"}
-compiler=$CC
-_LT_AC_TAGVAR(compiler, $1)=$CC
-_LT_CC_BASENAME([$compiler])
-_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
+_LT_EOF
+      elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+      else
+	_LT_TAGVAR(ld_shlibs, $1)=no
+      fi
+      ;;
 
-AC_LIBTOOL_CONFIG($1)
+    sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
+      case `$LD -v 2>&1` in
+        *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.1[[0-5]].*)
+	_LT_TAGVAR(ld_shlibs, $1)=no
+	cat <<_LT_EOF 1>&2
 
-AC_LANG_RESTORE
-CC="$lt_save_CC"
-])# AC_LIBTOOL_LANG_RC_CONFIG
+*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not
+*** reliably create shared libraries on SCO systems.  Therefore, libtool
+*** is disabling shared libraries support.  We urge you to upgrade GNU
+*** binutils to release 2.16.91.0.3 or newer.  Another option is to modify
+*** your PATH or compiler configuration so that the native linker is
+*** used, and then restart.
 
+_LT_EOF
+	;;
+	*)
+	  # For security reasons, it is highly recommended that you always
+	  # use absolute paths for naming shared libraries, and exclude the
+	  # DT_RUNPATH tag from executables and libraries.  But doing so
+	  # requires that you compile everything twice, which is a pain.
+	  if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+	    _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	    _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+	  else
+	    _LT_TAGVAR(ld_shlibs, $1)=no
+	  fi
+	;;
+      esac
+      ;;
 
-# AC_LIBTOOL_CONFIG([TAGNAME])
-# ----------------------------
-# If TAGNAME is not passed, then create an initial libtool script
-# with a default configuration from the untagged config vars.  Otherwise
-# add code to config.status for appending the configuration named by
-# TAGNAME from the matching tagged config vars.
-AC_DEFUN([AC_LIBTOOL_CONFIG],
-[# The else clause should only fire when bootstrapping the
-# libtool distribution, otherwise you forgot to ship ltmain.sh
-# with your package, and you will get complaints that there are
-# no rules to generate ltmain.sh.
-if test -f "$ltmain"; then
-  # See if we are running on zsh, and set the options which allow our commands through
-  # without removal of \ escapes.
-  if test -n "${ZSH_VERSION+set}" ; then
-    setopt NO_GLOB_SUBST
-  fi
-  # Now quote all the things that may contain metacharacters while being
-  # careful not to overquote the AC_SUBSTed values.  We take copies of the
-  # variables and quote the copies for generation of the libtool script.
-  for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \
-    SED SHELL STRIP \
-    libname_spec library_names_spec soname_spec extract_expsyms_cmds \
-    old_striplib striplib file_magic_cmd finish_cmds finish_eval \
-    deplibs_check_method reload_flag reload_cmds need_locks \
-    lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \
-    lt_cv_sys_global_symbol_to_c_name_address \
-    sys_lib_search_path_spec sys_lib_dlsearch_path_spec \
-    old_postinstall_cmds old_postuninstall_cmds \
-    _LT_AC_TAGVAR(compiler, $1) \
-    _LT_AC_TAGVAR(CC, $1) \
-    _LT_AC_TAGVAR(LD, $1) \
-    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1) \
-    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1) \
-    _LT_AC_TAGVAR(lt_prog_compiler_static, $1) \
-    _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) \
-    _LT_AC_TAGVAR(export_dynamic_flag_spec, $1) \
-    _LT_AC_TAGVAR(thread_safe_flag_spec, $1) \
-    _LT_AC_TAGVAR(whole_archive_flag_spec, $1) \
-    _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1) \
-    _LT_AC_TAGVAR(old_archive_cmds, $1) \
-    _LT_AC_TAGVAR(old_archive_from_new_cmds, $1) \
-    _LT_AC_TAGVAR(predep_objects, $1) \
-    _LT_AC_TAGVAR(postdep_objects, $1) \
-    _LT_AC_TAGVAR(predeps, $1) \
-    _LT_AC_TAGVAR(postdeps, $1) \
-    _LT_AC_TAGVAR(compiler_lib_search_path, $1) \
-    _LT_AC_TAGVAR(compiler_lib_search_dirs, $1) \
-    _LT_AC_TAGVAR(archive_cmds, $1) \
-    _LT_AC_TAGVAR(archive_expsym_cmds, $1) \
-    _LT_AC_TAGVAR(postinstall_cmds, $1) \
-    _LT_AC_TAGVAR(postuninstall_cmds, $1) \
-    _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1) \
-    _LT_AC_TAGVAR(allow_undefined_flag, $1) \
-    _LT_AC_TAGVAR(no_undefined_flag, $1) \
-    _LT_AC_TAGVAR(export_symbols_cmds, $1) \
-    _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) \
-    _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1) \
-    _LT_AC_TAGVAR(hardcode_libdir_separator, $1) \
-    _LT_AC_TAGVAR(hardcode_automatic, $1) \
-    _LT_AC_TAGVAR(module_cmds, $1) \
-    _LT_AC_TAGVAR(module_expsym_cmds, $1) \
-    _LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1) \
-    _LT_AC_TAGVAR(fix_srcfile_path, $1) \
-    _LT_AC_TAGVAR(exclude_expsyms, $1) \
-    _LT_AC_TAGVAR(include_expsyms, $1); do
-
-    case $var in
-    _LT_AC_TAGVAR(old_archive_cmds, $1) | \
-    _LT_AC_TAGVAR(old_archive_from_new_cmds, $1) | \
-    _LT_AC_TAGVAR(archive_cmds, $1) | \
-    _LT_AC_TAGVAR(archive_expsym_cmds, $1) | \
-    _LT_AC_TAGVAR(module_cmds, $1) | \
-    _LT_AC_TAGVAR(module_expsym_cmds, $1) | \
-    _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1) | \
-    _LT_AC_TAGVAR(export_symbols_cmds, $1) | \
-    extract_expsyms_cmds | reload_cmds | finish_cmds | \
-    postinstall_cmds | postuninstall_cmds | \
-    old_postinstall_cmds | old_postuninstall_cmds | \
-    sys_lib_search_path_spec | sys_lib_dlsearch_path_spec)
-      # Double-quote double-evaled strings.
-      eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\""
+    sunos4*)
+      _LT_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+      wlarc=
+      _LT_TAGVAR(hardcode_direct, $1)=yes
+      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
       ;;
+
     *)
-      eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\""
+      if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+      else
+	_LT_TAGVAR(ld_shlibs, $1)=no
+      fi
       ;;
     esac
-  done
 
-  case $lt_echo in
-  *'\[$]0 --fallback-echo"')
-    lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\[$]0 --fallback-echo"[$]/[$]0 --fallback-echo"/'`
-    ;;
-  esac
-
-ifelse([$1], [],
-  [cfgfile="${ofile}T"
-  trap "$rm \"$cfgfile\"; exit 1" 1 2 15
-  $rm -f "$cfgfile"
-  AC_MSG_NOTICE([creating $ofile])],
-  [cfgfile="$ofile"])
+    if test "$_LT_TAGVAR(ld_shlibs, $1)" = no; then
+      runpath_var=
+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
+      _LT_TAGVAR(export_dynamic_flag_spec, $1)=
+      _LT_TAGVAR(whole_archive_flag_spec, $1)=
+    fi
+  else
+    # PORTME fill in a description of your system's linker (not GNU ld)
+    case $host_os in
+    aix3*)
+      _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+      _LT_TAGVAR(always_export_symbols, $1)=yes
+      _LT_TAGVAR(archive_expsym_cmds, $1)='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
+      # Note: this linker hardcodes the directories in LIBPATH if there
+      # are no directories specified by -L.
+      _LT_TAGVAR(hardcode_minus_L, $1)=yes
+      if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then
+	# Neither direct hardcoding nor static linking is supported with a
+	# broken collect2.
+	_LT_TAGVAR(hardcode_direct, $1)=unsupported
+      fi
+      ;;
 
-  cat <<__EOF__ >> "$cfgfile"
-ifelse([$1], [],
-[#! $SHELL
+    aix[[4-9]]*)
+      if test "$host_cpu" = ia64; then
+	# On IA64, the linker does run time linking by default, so we don't
+	# have to do anything special.
+	aix_use_runtimelinking=no
+	exp_sym_flag='-Bexport'
+	no_entry_flag=""
+      else
+	# If we're using GNU nm, then we don't want the "-C" option.
+	# -C means demangle to AIX nm, but means don't demangle with GNU nm
+	if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
+	  _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+	else
+	  _LT_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+	fi
+	aix_use_runtimelinking=no
 
-# `$echo "$cfgfile" | sed 's%^.*/%%'` - Provide generalized library-building support services.
-# Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP)
-# NOTE: Changes made to this file will be lost: look at ltmain.sh.
-#
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008
-# Free Software Foundation, Inc.
-#
-# This file is part of GNU Libtool:
-# Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
-#
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
+	# Test if we are trying to use run time linking or normal
+	# AIX style linking. If -brtl is somewhere in LDFLAGS, we
+	# need to do runtime linking.
+	case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*)
+	  for ld_flag in $LDFLAGS; do
+	  if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
+	    aix_use_runtimelinking=yes
+	    break
+	  fi
+	  done
+	  ;;
+	esac
 
-# A sed program that does not truncate output.
-SED=$lt_SED
+	exp_sym_flag='-bexport'
+	no_entry_flag='-bnoentry'
+      fi
 
-# Sed that helps us avoid accidentally triggering echo(1) options like -n.
-Xsed="$SED -e 1s/^X//"
+      # When large executables or shared objects are built, AIX ld can
+      # have problems creating the table of contents.  If linking a library
+      # or program results in "error TOC overflow" add -mminimal-toc to
+      # CXXFLAGS/CFLAGS for g++/gcc.  In the cases where that is not
+      # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
 
-# The HP-UX ksh and POSIX shell print the target directory to stdout
-# if CDPATH is set.
-(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+      _LT_TAGVAR(archive_cmds, $1)=''
+      _LT_TAGVAR(hardcode_direct, $1)=yes
+      _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
+      _LT_TAGVAR(hardcode_libdir_separator, $1)=':'
+      _LT_TAGVAR(link_all_deplibs, $1)=yes
+      _LT_TAGVAR(file_list_spec, $1)='${wl}-f,'
 
-# The names of the tagged configurations supported by this script.
-available_tags=
+      if test "$GCC" = yes; then
+	case $host_os in aix4.[[012]]|aix4.[[012]].*)
+	# We only want to do this on AIX 4.2 and lower, the check
+	# below for broken collect2 doesn't work under 4.3+
+	  collect2name=`${CC} -print-prog-name=collect2`
+	  if test -f "$collect2name" &&
+	   strings "$collect2name" | $GREP resolve_lib_name >/dev/null
+	  then
+	  # We have reworked collect2
+	  :
+	  else
+	  # We have old collect2
+	  _LT_TAGVAR(hardcode_direct, $1)=unsupported
+	  # It fails to find uninstalled libraries when the uninstalled
+	  # path is not listed in the libpath.  Setting hardcode_minus_L
+	  # to unsupported forces relinking
+	  _LT_TAGVAR(hardcode_minus_L, $1)=yes
+	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+	  _LT_TAGVAR(hardcode_libdir_separator, $1)=
+	  fi
+	  ;;
+	esac
+	shared_flag='-shared'
+	if test "$aix_use_runtimelinking" = yes; then
+	  shared_flag="$shared_flag "'${wl}-G'
+	fi
+	_LT_TAGVAR(link_all_deplibs, $1)=no
+      else
+	# not using gcc
+	if test "$host_cpu" = ia64; then
+	# VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
+	# chokes on -Wl,-G. The following line is correct:
+	  shared_flag='-G'
+	else
+	  if test "$aix_use_runtimelinking" = yes; then
+	    shared_flag='${wl}-G'
+	  else
+	    shared_flag='${wl}-bM:SRE'
+	  fi
+	fi
+      fi
 
-# ### BEGIN LIBTOOL CONFIG],
-[# ### BEGIN LIBTOOL TAG CONFIG: $tagname])
+      _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-bexpall'
+      # It seems that -bexpall does not export symbols beginning with
+      # underscore (_), so it is better to generate a list of symbols to export.
+      _LT_TAGVAR(always_export_symbols, $1)=yes
+      if test "$aix_use_runtimelinking" = yes; then
+	# Warning - without using the other runtime loading flags (-brtl),
+	# -berok will link without error, but may produce a broken library.
+	_LT_TAGVAR(allow_undefined_flag, $1)='-berok'
+        # Determine the default libpath from the value encoded in an
+        # empty executable.
+        _LT_SYS_MODULE_PATH_AIX
+        _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
+        _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then $ECHO "X${wl}${allow_undefined_flag}" | $Xsed; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+      else
+	if test "$host_cpu" = ia64; then
+	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
+	  _LT_TAGVAR(allow_undefined_flag, $1)="-z nodefs"
+	  _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
+	else
+	 # Determine the default libpath from the value encoded in an
+	 # empty executable.
+	 _LT_SYS_MODULE_PATH_AIX
+	 _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
+	  # Warning - without using the other run time loading flags,
+	  # -berok will link without error, but may produce a broken library.
+	  _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
+	  _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
+	  # Exported symbols can be pulled into shared objects from archives
+	  _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
+	  _LT_TAGVAR(archive_cmds_need_lc, $1)=yes
+	  # This is similar to how AIX traditionally builds its shared libraries.
+	  _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
+	fi
+      fi
+      ;;
 
-# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
+    amigaos*)
+      case $host_cpu in
+      powerpc)
+            # see comment about AmigaOS4 .so support
+            _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+            _LT_TAGVAR(archive_expsym_cmds, $1)=''
+        ;;
+      m68k)
+            _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
+            _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+            _LT_TAGVAR(hardcode_minus_L, $1)=yes
+        ;;
+      esac
+      ;;
 
-# Shell to use when invoking shell scripts.
-SHELL=$lt_SHELL
+    bsdi[[45]]*)
+      _LT_TAGVAR(export_dynamic_flag_spec, $1)=-rdynamic
+      ;;
 
-# Whether or not to build shared libraries.
-build_libtool_libs=$enable_shared
+    cygwin* | mingw* | pw32* | cegcc*)
+      # When not using gcc, we currently assume that we are using
+      # Microsoft Visual C++.
+      # hardcode_libdir_flag_spec is actually meaningless, as there is
+      # no search path for DLLs.
+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' '
+      _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+      # Tell ltmain to make .lib files, not .a files.
+      libext=lib
+      # Tell ltmain to make .dll files, not .so files.
+      shrext_cmds=".dll"
+      # FIXME: Setting linknames here is a bad hack.
+      _LT_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `$ECHO "X$deplibs" | $Xsed -e '\''s/ -lc$//'\''` -link -dll~linknames='
+      # The linker will automatically build a .lib file if we build a DLL.
+      _LT_TAGVAR(old_archive_from_new_cmds, $1)='true'
+      # FIXME: Should let the user specify the lib program.
+      _LT_TAGVAR(old_archive_cmds, $1)='lib -OUT:$oldlib$oldobjs$old_deplibs'
+      _LT_TAGVAR(fix_srcfile_path, $1)='`cygpath -w "$srcfile"`'
+      _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+      ;;
 
-# Whether or not to build static libraries.
-build_old_libs=$enable_static
+    darwin* | rhapsody*)
+      _LT_DARWIN_LINKER_FEATURES($1)
+      ;;
 
-# Whether or not to add -lc for building shared libraries.
-build_libtool_need_lc=$_LT_AC_TAGVAR(archive_cmds_need_lc, $1)
+    dgux*)
+      _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+      ;;
 
-# Whether or not to disallow shared libs when runtime libs are static
-allow_libtool_libs_with_static_runtimes=$_LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)
+    freebsd1*)
+      _LT_TAGVAR(ld_shlibs, $1)=no
+      ;;
 
-# Whether or not to optimize for fast installation.
-fast_install=$enable_fast_install
+    # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
+    # support.  Future versions do this automatically, but an explicit c++rt0.o
+    # does not break anything, and helps significantly (at the cost of a little
+    # extra space).
+    freebsd2.2*)
+      _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+      _LT_TAGVAR(hardcode_direct, $1)=yes
+      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+      ;;
 
-# The host system.
-host_alias=$host_alias
-host=$host
-host_os=$host_os
+    # Unfortunately, older versions of FreeBSD 2 do not have this feature.
+    freebsd2*)
+      _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+      _LT_TAGVAR(hardcode_direct, $1)=yes
+      _LT_TAGVAR(hardcode_minus_L, $1)=yes
+      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+      ;;
 
-# The build system.
-build_alias=$build_alias
-build=$build
-build_os=$build_os
+    # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
+    freebsd* | dragonfly*)
+      _LT_TAGVAR(archive_cmds, $1)='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+      _LT_TAGVAR(hardcode_direct, $1)=yes
+      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+      ;;
 
-# An echo program that does not interpret backslashes.
-echo=$lt_echo
+    hpux9*)
+      if test "$GCC" = yes; then
+	_LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+      else
+	_LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+      fi
+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+      _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+      _LT_TAGVAR(hardcode_direct, $1)=yes
 
-# The archiver.
-AR=$lt_AR
-AR_FLAGS=$lt_AR_FLAGS
+      # hardcode_minus_L: Not really in the search PATH,
+      # but as the default location of the library.
+      _LT_TAGVAR(hardcode_minus_L, $1)=yes
+      _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+      ;;
 
-# A C compiler.
-LTCC=$lt_LTCC
+    hpux10*)
+      if test "$GCC" = yes -a "$with_gnu_ld" = no; then
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+      else
+	_LT_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
+      fi
+      if test "$with_gnu_ld" = no; then
+	_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+	_LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='+b $libdir'
+	_LT_TAGVAR(hardcode_libdir_separator, $1)=:
+	_LT_TAGVAR(hardcode_direct, $1)=yes
+	_LT_TAGVAR(hardcode_direct_absolute, $1)=yes
+	_LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+	# hardcode_minus_L: Not really in the search PATH,
+	# but as the default location of the library.
+	_LT_TAGVAR(hardcode_minus_L, $1)=yes
+      fi
+      ;;
 
-# LTCC compiler flags.
-LTCFLAGS=$lt_LTCFLAGS
+    hpux11*)
+      if test "$GCC" = yes -a "$with_gnu_ld" = no; then
+	case $host_cpu in
+	hppa*64*)
+	  _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	ia64*)
+	  _LT_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	*)
+	  _LT_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	esac
+      else
+	case $host_cpu in
+	hppa*64*)
+	  _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	ia64*)
+	  _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	*)
+	  _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	esac
+      fi
+      if test "$with_gnu_ld" = no; then
+	_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+	_LT_TAGVAR(hardcode_libdir_separator, $1)=:
 
-# A language-specific compiler.
-CC=$lt_[]_LT_AC_TAGVAR(compiler, $1)
+	case $host_cpu in
+	hppa*64*|ia64*)
+	  _LT_TAGVAR(hardcode_direct, $1)=no
+	  _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+	  ;;
+	*)
+	  _LT_TAGVAR(hardcode_direct, $1)=yes
+	  _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
+	  _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
 
-# Is the compiler the GNU C compiler?
-with_gcc=$_LT_AC_TAGVAR(GCC, $1)
+	  # hardcode_minus_L: Not really in the search PATH,
+	  # but as the default location of the library.
+	  _LT_TAGVAR(hardcode_minus_L, $1)=yes
+	  ;;
+	esac
+      fi
+      ;;
 
-# An ERE matcher.
-EGREP=$lt_EGREP
+    irix5* | irix6* | nonstopux*)
+      if test "$GCC" = yes; then
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+	# Try to use the -exported_symbol ld option, if it does not
+	# work, assume that -exports_file does not work either and
+	# implicitly export all symbols.
+        save_LDFLAGS="$LDFLAGS"
+        LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null"
+        AC_LINK_IFELSE(int foo(void) {},
+          _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib'
+        )
+        LDFLAGS="$save_LDFLAGS"
+      else
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
+	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib'
+      fi
+      _LT_TAGVAR(archive_cmds_need_lc, $1)='no'
+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+      _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+      _LT_TAGVAR(inherit_rpath, $1)=yes
+      _LT_TAGVAR(link_all_deplibs, $1)=yes
+      ;;
 
-# The linker used to build libraries.
-LD=$lt_[]_LT_AC_TAGVAR(LD, $1)
-
-# Whether we need hard or soft links.
-LN_S=$lt_LN_S
-
-# A BSD-compatible nm program.
-NM=$lt_NM
-
-# A symbol stripping program
-STRIP=$lt_STRIP
-
-# Used to examine libraries when file_magic_cmd begins "file"
-MAGIC_CMD=$MAGIC_CMD
+    netbsd* | netbsdelf*-gnu)
+      if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+	_LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'  # a.out
+      else
+	_LT_TAGVAR(archive_cmds, $1)='$LD -shared -o $lib $libobjs $deplibs $linker_flags'      # ELF
+      fi
+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+      _LT_TAGVAR(hardcode_direct, $1)=yes
+      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+      ;;
 
-# Used on cygwin: DLL creation program.
-DLLTOOL="$DLLTOOL"
+    newsos6)
+      _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      _LT_TAGVAR(hardcode_direct, $1)=yes
+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+      _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+      ;;
 
-# Used on cygwin: object dumper.
-OBJDUMP="$OBJDUMP"
+    *nto* | *qnx*)
+      ;;
 
-# Used on cygwin: assembler.
-AS="$AS"
+    openbsd*)
+      if test -f /usr/libexec/ld.so; then
+	_LT_TAGVAR(hardcode_direct, $1)=yes
+	_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+	_LT_TAGVAR(hardcode_direct_absolute, $1)=yes
+	if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+	  _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+	  _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
+	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+	  _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+	else
+	  case $host_os in
+	   openbsd[[01]].* | openbsd2.[[0-7]] | openbsd2.[[0-7]].*)
+	     _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+	     _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+	     ;;
+	   *)
+	     _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+	     _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+	     ;;
+	  esac
+	fi
+      else
+	_LT_TAGVAR(ld_shlibs, $1)=no
+      fi
+      ;;
 
-# The name of the directory that contains temporary libtool files.
-objdir=$objdir
+    os2*)
+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+      _LT_TAGVAR(hardcode_minus_L, $1)=yes
+      _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+      _LT_TAGVAR(archive_cmds, $1)='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$ECHO DATA >> $output_objdir/$libname.def~$ECHO " SINGLE NONSHARED" >> $output_objdir/$libname.def~$ECHO EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
+      _LT_TAGVAR(old_archive_from_new_cmds, $1)='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
+      ;;
 
-# How to create reloadable object files.
-reload_flag=$lt_reload_flag
-reload_cmds=$lt_reload_cmds
+    osf3*)
+      if test "$GCC" = yes; then
+	_LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+      else
+	_LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
+      fi
+      _LT_TAGVAR(archive_cmds_need_lc, $1)='no'
+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+      _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+      ;;
 
-# How to pass a linker flag through the compiler.
-wl=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)
+    osf4* | osf5*)	# as osf3* with the addition of -msym flag
+      if test "$GCC" = yes; then
+	_LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+	_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+      else
+	_LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
+	_LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~
+	$CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp'
 
-# Object file suffix (normally "o").
-objext="$ac_objext"
+	# Both c and cxx compiler support -rpath directly
+	_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
+      fi
+      _LT_TAGVAR(archive_cmds_need_lc, $1)='no'
+      _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+      ;;
 
-# Old archive suffix (normally "a").
-libext="$libext"
+    solaris*)
+      _LT_TAGVAR(no_undefined_flag, $1)=' -z defs'
+      if test "$GCC" = yes; then
+	wlarc='${wl}'
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	_LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+	  $CC -shared ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
+      else
+	case `$CC -V 2>&1` in
+	*"Compilers 5.0"*)
+	  wlarc=''
+	  _LT_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	  _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+	  $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp'
+	  ;;
+	*)
+	  wlarc='${wl}'
+	  _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $compiler_flags'
+	  _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+	  $CC -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
+	  ;;
+	esac
+      fi
+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+      case $host_os in
+      solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
+      *)
+	# The compiler driver will combine and reorder linker options,
+	# but understands `-z linker_flag'.  GCC discards it without `$wl',
+	# but is careful enough not to reorder.
+	# Supported since Solaris 2.6 (maybe 2.5.1?)
+	if test "$GCC" = yes; then
+	  _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
+	else
+	  _LT_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract'
+	fi
+	;;
+      esac
+      _LT_TAGVAR(link_all_deplibs, $1)=yes
+      ;;
 
-# Shared library suffix (normally ".so").
-shrext_cmds='$shrext_cmds'
+    sunos4*)
+      if test "x$host_vendor" = xsequent; then
+	# Use $CC to link under sequent, because it throws in some extra .o
+	# files that make .init and .fini sections work.
+	_LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
+      else
+	_LT_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
+      fi
+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+      _LT_TAGVAR(hardcode_direct, $1)=yes
+      _LT_TAGVAR(hardcode_minus_L, $1)=yes
+      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+      ;;
 
-# Executable file suffix (normally "").
-exeext="$exeext"
+    sysv4)
+      case $host_vendor in
+	sni)
+	  _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	  _LT_TAGVAR(hardcode_direct, $1)=yes # is this really true???
+	;;
+	siemens)
+	  ## LD is ld it makes a PLAMLIB
+	  ## CC just makes a GrossModule.
+	  _LT_TAGVAR(archive_cmds, $1)='$LD -G -o $lib $libobjs $deplibs $linker_flags'
+	  _LT_TAGVAR(reload_cmds, $1)='$CC -r -o $output$reload_objs'
+	  _LT_TAGVAR(hardcode_direct, $1)=no
+        ;;
+	motorola)
+	  _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	  _LT_TAGVAR(hardcode_direct, $1)=no #Motorola manual says yes, but my tests say they lie
+	;;
+      esac
+      runpath_var='LD_RUN_PATH'
+      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+      ;;
 
-# Additional compiler flags for building library objects.
-pic_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)
-pic_mode=$pic_mode
+    sysv4.3*)
+      _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+      _LT_TAGVAR(export_dynamic_flag_spec, $1)='-Bexport'
+      ;;
 
-# What is the maximum length of a command?
-max_cmd_len=$lt_cv_sys_max_cmd_len
+    sysv4*MP*)
+      if test -d /usr/nec; then
+	_LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+	runpath_var=LD_RUN_PATH
+	hardcode_runpath_var=yes
+	_LT_TAGVAR(ld_shlibs, $1)=yes
+      fi
+      ;;
 
-# Does compiler simultaneously support -c and -o options?
-compiler_c_o=$lt_[]_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)
+    sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*)
+      _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
+      _LT_TAGVAR(archive_cmds_need_lc, $1)=no
+      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+      runpath_var='LD_RUN_PATH'
 
-# Must we lock files when doing compilation?
-need_locks=$lt_need_locks
+      if test "$GCC" = yes; then
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+      else
+	_LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+      fi
+      ;;
 
-# Do we need the lib prefix for modules?
-need_lib_prefix=$need_lib_prefix
+    sysv5* | sco3.2v5* | sco5v6*)
+      # Note: We can NOT use -z defs as we might desire, because we do not
+      # link with -lc, and that would cause any symbols used from libc to
+      # always be unresolved, which means just about no library would
+      # ever link correctly.  If we're not using GNU ld we use -z text
+      # though, which does catch some bad symbols but isn't as heavy-handed
+      # as -z defs.
+      _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
+      _LT_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs'
+      _LT_TAGVAR(archive_cmds_need_lc, $1)=no
+      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R,$libdir'
+      _LT_TAGVAR(hardcode_libdir_separator, $1)=':'
+      _LT_TAGVAR(link_all_deplibs, $1)=yes
+      _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport'
+      runpath_var='LD_RUN_PATH'
 
-# Do we need a version for libraries?
-need_version=$need_version
+      if test "$GCC" = yes; then
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+      else
+	_LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+      fi
+      ;;
 
-# Whether dlopen is supported.
-dlopen_support=$enable_dlopen
+    uts4*)
+      _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+      ;;
 
-# Whether dlopen of programs is supported.
-dlopen_self=$enable_dlopen_self
+    *)
+      _LT_TAGVAR(ld_shlibs, $1)=no
+      ;;
+    esac
 
-# Whether dlopen of statically linked programs is supported.
-dlopen_self_static=$enable_dlopen_self_static
+    if test x$host_vendor = xsni; then
+      case $host in
+      sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
+	_LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Blargedynsym'
+	;;
+      esac
+    fi
+  fi
+])
+AC_MSG_RESULT([$_LT_TAGVAR(ld_shlibs, $1)])
+test "$_LT_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no
 
-# Compiler flag to prevent dynamic linking.
-link_static_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_static, $1)
+_LT_TAGVAR(with_gnu_ld, $1)=$with_gnu_ld
 
-# Compiler flag to turn off builtin functions.
-no_builtin_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)
+_LT_DECL([], [libext], [0], [Old archive suffix (normally "a")])dnl
+_LT_DECL([], [shrext_cmds], [1], [Shared library suffix (normally ".so")])dnl
+_LT_DECL([], [extract_expsyms_cmds], [2],
+    [The commands to extract the exported symbol list from a shared archive])
 
-# Compiler flag to allow reflexive dlopens.
-export_dynamic_flag_spec=$lt_[]_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)
+#
+# Do we need to explicitly link libc?
+#
+case "x$_LT_TAGVAR(archive_cmds_need_lc, $1)" in
+x|xyes)
+  # Assume -lc should be added
+  _LT_TAGVAR(archive_cmds_need_lc, $1)=yes
 
-# Compiler flag to generate shared objects directly from archives.
-whole_archive_flag_spec=$lt_[]_LT_AC_TAGVAR(whole_archive_flag_spec, $1)
+  if test "$enable_shared" = yes && test "$GCC" = yes; then
+    case $_LT_TAGVAR(archive_cmds, $1) in
+    *'~'*)
+      # FIXME: we may have to deal with multi-command sequences.
+      ;;
+    '$CC '*)
+      # Test whether the compiler implicitly links with -lc since on some
+      # systems, -lgcc has to come before -lc. If gcc already passes -lc
+      # to ld, don't add -lc before -lgcc.
+      AC_MSG_CHECKING([whether -lc should be explicitly linked in])
+      $RM conftest*
+      echo "$lt_simple_compile_test_code" > conftest.$ac_ext
 
-# Compiler flag to generate thread-safe objects.
-thread_safe_flag_spec=$lt_[]_LT_AC_TAGVAR(thread_safe_flag_spec, $1)
+      if AC_TRY_EVAL(ac_compile) 2>conftest.err; then
+        soname=conftest
+        lib=conftest
+        libobjs=conftest.$ac_objext
+        deplibs=
+        wl=$_LT_TAGVAR(lt_prog_compiler_wl, $1)
+	pic_flag=$_LT_TAGVAR(lt_prog_compiler_pic, $1)
+        compiler_flags=-v
+        linker_flags=-v
+        verstring=
+        output_objdir=.
+        libname=conftest
+        lt_save_allow_undefined_flag=$_LT_TAGVAR(allow_undefined_flag, $1)
+        _LT_TAGVAR(allow_undefined_flag, $1)=
+        if AC_TRY_EVAL(_LT_TAGVAR(archive_cmds, $1) 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1)
+        then
+	  _LT_TAGVAR(archive_cmds_need_lc, $1)=no
+        else
+	  _LT_TAGVAR(archive_cmds_need_lc, $1)=yes
+        fi
+        _LT_TAGVAR(allow_undefined_flag, $1)=$lt_save_allow_undefined_flag
+      else
+        cat conftest.err 1>&5
+      fi
+      $RM conftest*
+      AC_MSG_RESULT([$_LT_TAGVAR(archive_cmds_need_lc, $1)])
+      ;;
+    esac
+  fi
+  ;;
+esac
 
-# Library versioning type.
-version_type=$version_type
+_LT_TAGDECL([build_libtool_need_lc], [archive_cmds_need_lc], [0],
+    [Whether or not to add -lc for building shared libraries])
+_LT_TAGDECL([allow_libtool_libs_with_static_runtimes],
+    [enable_shared_with_static_runtimes], [0],
+    [Whether or not to disallow shared libs when runtime libs are static])
+_LT_TAGDECL([], [export_dynamic_flag_spec], [1],
+    [Compiler flag to allow reflexive dlopens])
+_LT_TAGDECL([], [whole_archive_flag_spec], [1],
+    [Compiler flag to generate shared objects directly from archives])
+_LT_TAGDECL([], [compiler_needs_object], [1],
+    [Whether the compiler copes with passing no objects directly])
+_LT_TAGDECL([], [old_archive_from_new_cmds], [2],
+    [Create an old-style archive from a shared archive])
+_LT_TAGDECL([], [old_archive_from_expsyms_cmds], [2],
+    [Create a temporary old-style archive to link instead of a shared archive])
+_LT_TAGDECL([], [archive_cmds], [2], [Commands used to build a shared archive])
+_LT_TAGDECL([], [archive_expsym_cmds], [2])
+_LT_TAGDECL([], [module_cmds], [2],
+    [Commands used to build a loadable module if different from building
+    a shared archive.])
+_LT_TAGDECL([], [module_expsym_cmds], [2])
+_LT_TAGDECL([], [with_gnu_ld], [1],
+    [Whether we are building with GNU ld or not])
+_LT_TAGDECL([], [allow_undefined_flag], [1],
+    [Flag that allows shared libraries with undefined symbols to be built])
+_LT_TAGDECL([], [no_undefined_flag], [1],
+    [Flag that enforces no undefined symbols])
+_LT_TAGDECL([], [hardcode_libdir_flag_spec], [1],
+    [Flag to hardcode $libdir into a binary during linking.
+    This must work even if $libdir does not exist])
+_LT_TAGDECL([], [hardcode_libdir_flag_spec_ld], [1],
+    [[If ld is used when linking, flag to hardcode $libdir into a binary
+    during linking.  This must work even if $libdir does not exist]])
+_LT_TAGDECL([], [hardcode_libdir_separator], [1],
+    [Whether we need a single "-rpath" flag with a separated argument])
+_LT_TAGDECL([], [hardcode_direct], [0],
+    [Set to "yes" if using DIR/libNAME${shared_ext} during linking hardcodes
+    DIR into the resulting binary])
+_LT_TAGDECL([], [hardcode_direct_absolute], [0],
+    [Set to "yes" if using DIR/libNAME${shared_ext} during linking hardcodes
+    DIR into the resulting binary and the resulting library dependency is
+    "absolute", i.e impossible to change by setting ${shlibpath_var} if the
+    library is relocated])
+_LT_TAGDECL([], [hardcode_minus_L], [0],
+    [Set to "yes" if using the -LDIR flag during linking hardcodes DIR
+    into the resulting binary])
+_LT_TAGDECL([], [hardcode_shlibpath_var], [0],
+    [Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR
+    into the resulting binary])
+_LT_TAGDECL([], [hardcode_automatic], [0],
+    [Set to "yes" if building a shared library automatically hardcodes DIR
+    into the library and all subsequent libraries and executables linked
+    against it])
+_LT_TAGDECL([], [inherit_rpath], [0],
+    [Set to yes if linker adds runtime paths of dependent libraries
+    to runtime path list])
+_LT_TAGDECL([], [link_all_deplibs], [0],
+    [Whether libtool must link a program against all its dependency libraries])
+_LT_TAGDECL([], [fix_srcfile_path], [1],
+    [Fix the shell variable $srcfile for the compiler])
+_LT_TAGDECL([], [always_export_symbols], [0],
+    [Set to "yes" if exported symbols are required])
+_LT_TAGDECL([], [export_symbols_cmds], [2],
+    [The commands to list exported symbols])
+_LT_TAGDECL([], [exclude_expsyms], [1],
+    [Symbols that should not be listed in the preloaded symbols])
+_LT_TAGDECL([], [include_expsyms], [1],
+    [Symbols that must always be exported])
+_LT_TAGDECL([], [prelink_cmds], [2],
+    [Commands necessary for linking programs (against libraries) with templates])
+_LT_TAGDECL([], [file_list_spec], [1],
+    [Specify filename containing input files])
+dnl FIXME: Not yet implemented
+dnl _LT_TAGDECL([], [thread_safe_flag_spec], [1],
+dnl    [Compiler flag to generate thread safe objects])
+])# _LT_LINKER_SHLIBS
 
-# Format of library name prefix.
-libname_spec=$lt_libname_spec
 
-# List of archive names.  First name is the real one, the rest are links.
-# The last name is the one that the linker finds with -lNAME.
-library_names_spec=$lt_library_names_spec
+# _LT_LANG_C_CONFIG([TAG])
+# ------------------------
+# Ensure that the configuration variables for a C compiler are suitably
+# defined.  These variables are subsequently used by _LT_CONFIG to write
+# the compiler configuration to `libtool'.
+m4_defun([_LT_LANG_C_CONFIG],
+[m4_require([_LT_DECL_EGREP])dnl
+lt_save_CC="$CC"
+AC_LANG_PUSH(C)
 
-# The coded name of the library, if different from the real name.
-soname_spec=$lt_soname_spec
+# Source file extension for C test sources.
+ac_ext=c
 
-# Commands used to build and install an old-style archive.
-RANLIB=$lt_RANLIB
-old_archive_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_cmds, $1)
-old_postinstall_cmds=$lt_old_postinstall_cmds
-old_postuninstall_cmds=$lt_old_postuninstall_cmds
+# Object file extension for compiled C test sources.
+objext=o
+_LT_TAGVAR(objext, $1)=$objext
 
-# Create an old-style archive from a shared archive.
-old_archive_from_new_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_from_new_cmds, $1)
+# Code to be used in simple compile tests
+lt_simple_compile_test_code="int some_variable = 0;"
 
-# Create a temporary old-style archive to link instead of a shared archive.
-old_archive_from_expsyms_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1)
+# Code to be used in simple link tests
+lt_simple_link_test_code='int main(){return(0);}'
 
-# Commands used to build and install a shared archive.
-archive_cmds=$lt_[]_LT_AC_TAGVAR(archive_cmds, $1)
-archive_expsym_cmds=$lt_[]_LT_AC_TAGVAR(archive_expsym_cmds, $1)
-postinstall_cmds=$lt_postinstall_cmds
-postuninstall_cmds=$lt_postuninstall_cmds
+_LT_TAG_COMPILER
+# Save the default compiler, since it gets overwritten when the other
+# tags are being tested, and _LT_TAGVAR(compiler, []) is a NOP.
+compiler_DEFAULT=$CC
 
-# Commands used to build a loadable module (assumed same as above if empty)
-module_cmds=$lt_[]_LT_AC_TAGVAR(module_cmds, $1)
-module_expsym_cmds=$lt_[]_LT_AC_TAGVAR(module_expsym_cmds, $1)
+# save warnings/boilerplate of simple test code
+_LT_COMPILER_BOILERPLATE
+_LT_LINKER_BOILERPLATE
 
-# Commands to strip libraries.
-old_striplib=$lt_old_striplib
-striplib=$lt_striplib
+if test -n "$compiler"; then
+  _LT_COMPILER_NO_RTTI($1)
+  _LT_COMPILER_PIC($1)
+  _LT_COMPILER_C_O($1)
+  _LT_COMPILER_FILE_LOCKS($1)
+  _LT_LINKER_SHLIBS($1)
+  _LT_SYS_DYNAMIC_LINKER($1)
+  _LT_LINKER_HARDCODE_LIBPATH($1)
+  LT_SYS_DLOPEN_SELF
+  _LT_CMD_STRIPLIB
+
+  # Report which library types will actually be built
+  AC_MSG_CHECKING([if libtool supports shared libraries])
+  AC_MSG_RESULT([$can_build_shared])
 
-# Dependencies to place before the objects being linked to create a
-# shared library.
-predep_objects=$lt_[]_LT_AC_TAGVAR(predep_objects, $1)
+  AC_MSG_CHECKING([whether to build shared libraries])
+  test "$can_build_shared" = "no" && enable_shared=no
 
-# Dependencies to place after the objects being linked to create a
-# shared library.
-postdep_objects=$lt_[]_LT_AC_TAGVAR(postdep_objects, $1)
+  # On AIX, shared libraries and static libraries use the same namespace, and
+  # are all built from PIC.
+  case $host_os in
+  aix3*)
+    test "$enable_shared" = yes && enable_static=no
+    if test -n "$RANLIB"; then
+      archive_cmds="$archive_cmds~\$RANLIB \$lib"
+      postinstall_cmds='$RANLIB $lib'
+    fi
+    ;;
 
-# Dependencies to place before the objects being linked to create a
-# shared library.
-predeps=$lt_[]_LT_AC_TAGVAR(predeps, $1)
+  aix[[4-9]]*)
+    if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
+      test "$enable_shared" = yes && enable_static=no
+    fi
+    ;;
+  esac
+  AC_MSG_RESULT([$enable_shared])
 
-# Dependencies to place after the objects being linked to create a
-# shared library.
-postdeps=$lt_[]_LT_AC_TAGVAR(postdeps, $1)
+  AC_MSG_CHECKING([whether to build static libraries])
+  # Make sure either enable_shared or enable_static is yes.
+  test "$enable_shared" = yes || enable_static=yes
+  AC_MSG_RESULT([$enable_static])
 
-# The directories searched by this compiler when creating a shared
-# library
-compiler_lib_search_dirs=$lt_[]_LT_AC_TAGVAR(compiler_lib_search_dirs, $1)
+  _LT_CONFIG($1)
+fi
+AC_LANG_POP
+CC="$lt_save_CC"
+])# _LT_LANG_C_CONFIG
 
-# The library search path used internally by the compiler when linking
-# a shared library.
-compiler_lib_search_path=$lt_[]_LT_AC_TAGVAR(compiler_lib_search_path, $1)
 
-# Method to check whether dependent libraries are shared objects.
-deplibs_check_method=$lt_deplibs_check_method
+# _LT_PROG_CXX
+# ------------
+# Since AC_PROG_CXX is broken, in that it returns g++ if there is no c++
+# compiler, we have our own version here.
+m4_defun([_LT_PROG_CXX],
+[
+pushdef([AC_MSG_ERROR], [_lt_caught_CXX_error=yes])
+AC_PROG_CXX
+if test -n "$CXX" && ( test "X$CXX" != "Xno" &&
+    ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) ||
+    (test "X$CXX" != "Xg++"))) ; then
+  AC_PROG_CXXCPP
+else
+  _lt_caught_CXX_error=yes
+fi
+popdef([AC_MSG_ERROR])
+])# _LT_PROG_CXX
 
-# Command to use when deplibs_check_method == file_magic.
-file_magic_cmd=$lt_file_magic_cmd
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([_LT_PROG_CXX], [])
 
-# Flag that allows shared libraries with undefined symbols to be built.
-allow_undefined_flag=$lt_[]_LT_AC_TAGVAR(allow_undefined_flag, $1)
 
-# Flag that forces no undefined symbols.
-no_undefined_flag=$lt_[]_LT_AC_TAGVAR(no_undefined_flag, $1)
+# _LT_LANG_CXX_CONFIG([TAG])
+# --------------------------
+# Ensure that the configuration variables for a C++ compiler are suitably
+# defined.  These variables are subsequently used by _LT_CONFIG to write
+# the compiler configuration to `libtool'.
+m4_defun([_LT_LANG_CXX_CONFIG],
+[AC_REQUIRE([_LT_PROG_CXX])dnl
+m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+m4_require([_LT_DECL_EGREP])dnl
+
+AC_LANG_PUSH(C++)
+_LT_TAGVAR(archive_cmds_need_lc, $1)=no
+_LT_TAGVAR(allow_undefined_flag, $1)=
+_LT_TAGVAR(always_export_symbols, $1)=no
+_LT_TAGVAR(archive_expsym_cmds, $1)=
+_LT_TAGVAR(compiler_needs_object, $1)=no
+_LT_TAGVAR(export_dynamic_flag_spec, $1)=
+_LT_TAGVAR(hardcode_direct, $1)=no
+_LT_TAGVAR(hardcode_direct_absolute, $1)=no
+_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
+_LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
+_LT_TAGVAR(hardcode_libdir_separator, $1)=
+_LT_TAGVAR(hardcode_minus_L, $1)=no
+_LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
+_LT_TAGVAR(hardcode_automatic, $1)=no
+_LT_TAGVAR(inherit_rpath, $1)=no
+_LT_TAGVAR(module_cmds, $1)=
+_LT_TAGVAR(module_expsym_cmds, $1)=
+_LT_TAGVAR(link_all_deplibs, $1)=unknown
+_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
+_LT_TAGVAR(no_undefined_flag, $1)=
+_LT_TAGVAR(whole_archive_flag_spec, $1)=
+_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
 
-# Commands used to finish a libtool library installation in a directory.
-finish_cmds=$lt_finish_cmds
+# Source file extension for C++ test sources.
+ac_ext=cpp
 
-# Same as above, but a single script fragment to be evaled but not shown.
-finish_eval=$lt_finish_eval
+# Object file extension for compiled C++ test sources.
+objext=o
+_LT_TAGVAR(objext, $1)=$objext
 
-# Take the output of nm and produce a listing of raw symbols and C names.
-global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe
+# No sense in running all these tests if we already determined that
+# the CXX compiler isn't working.  Some variables (like enable_shared)
+# are currently assumed to apply to all compilers on this platform,
+# and will be corrupted by setting them based on a non-working compiler.
+if test "$_lt_caught_CXX_error" != yes; then
+  # Code to be used in simple compile tests
+  lt_simple_compile_test_code="int some_variable = 0;"
+
+  # Code to be used in simple link tests
+  lt_simple_link_test_code='int main(int, char *[[]]) { return(0); }'
+
+  # ltmain only uses $CC for tagged configurations so make sure $CC is set.
+  _LT_TAG_COMPILER
+
+  # save warnings/boilerplate of simple test code
+  _LT_COMPILER_BOILERPLATE
+  _LT_LINKER_BOILERPLATE
+
+  # Allow CC to be a program name with arguments.
+  lt_save_CC=$CC
+  lt_save_LD=$LD
+  lt_save_GCC=$GCC
+  GCC=$GXX
+  lt_save_with_gnu_ld=$with_gnu_ld
+  lt_save_path_LD=$lt_cv_path_LD
+  if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then
+    lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx
+  else
+    $as_unset lt_cv_prog_gnu_ld
+  fi
+  if test -n "${lt_cv_path_LDCXX+set}"; then
+    lt_cv_path_LD=$lt_cv_path_LDCXX
+  else
+    $as_unset lt_cv_path_LD
+  fi
+  test -z "${LDCXX+set}" || LD=$LDCXX
+  CC=${CXX-"c++"}
+  compiler=$CC
+  _LT_TAGVAR(compiler, $1)=$CC
+  _LT_CC_BASENAME([$compiler])
 
-# Transform the output of nm in a proper C declaration
-global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl
+  if test -n "$compiler"; then
+    # We don't want -fno-exception when compiling C++ code, so set the
+    # no_builtin_flag separately
+    if test "$GXX" = yes; then
+      _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin'
+    else
+      _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=
+    fi
 
-# Transform the output of nm in a C name address pair
-global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
+    if test "$GXX" = yes; then
+      # Set up default GNU C++ configuration
 
-# This is the shared library runtime path variable.
-runpath_var=$runpath_var
+      LT_PATH_LD
 
-# This is the shared library path variable.
-shlibpath_var=$shlibpath_var
+      # Check if GNU C++ uses GNU ld as the underlying linker, since the
+      # archiving commands below assume that GNU ld is being used.
+      if test "$with_gnu_ld" = yes; then
+        _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
+        _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+
+        _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+        _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+
+        # If archive_cmds runs LD, not CC, wlarc should be empty
+        # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to
+        #     investigate it a little bit more. (MM)
+        wlarc='${wl}'
+
+        # ancient GNU ld didn't support --whole-archive et. al.
+        if eval "`$CC -print-prog-name=ld` --help 2>&1" |
+	  $GREP 'no-whole-archive' > /dev/null; then
+          _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+        else
+          _LT_TAGVAR(whole_archive_flag_spec, $1)=
+        fi
+      else
+        with_gnu_ld=no
+        wlarc=
 
-# Is shlibpath searched before the hard-coded library search path?
-shlibpath_overrides_runpath=$shlibpath_overrides_runpath
+        # A generic and very simple default shared library creation
+        # command for GNU C++ for the case where it uses the native
+        # linker, instead of GNU ld.  If possible, this setting should
+        # overridden to take advantage of the native linker features on
+        # the platform it is being used on.
+        _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
+      fi
 
-# How to hardcode a shared library path into an executable.
-hardcode_action=$_LT_AC_TAGVAR(hardcode_action, $1)
+      # Commands to make compiler produce verbose output that lists
+      # what "hidden" libraries, object files and flags are used when
+      # linking a shared library.
+      output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"'
 
-# Whether we should hardcode library paths into libraries.
-hardcode_into_libs=$hardcode_into_libs
+    else
+      GXX=no
+      with_gnu_ld=no
+      wlarc=
+    fi
 
-# Flag to hardcode \$libdir into a binary during linking.
-# This must work even if \$libdir does not exist.
-hardcode_libdir_flag_spec=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)
+    # PORTME: fill in a description of your system's C++ link characteristics
+    AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries])
+    _LT_TAGVAR(ld_shlibs, $1)=yes
+    case $host_os in
+      aix3*)
+        # FIXME: insert proper C++ library support
+        _LT_TAGVAR(ld_shlibs, $1)=no
+        ;;
+      aix[[4-9]]*)
+        if test "$host_cpu" = ia64; then
+          # On IA64, the linker does run time linking by default, so we don't
+          # have to do anything special.
+          aix_use_runtimelinking=no
+          exp_sym_flag='-Bexport'
+          no_entry_flag=""
+        else
+          aix_use_runtimelinking=no
 
-# If ld is used when linking, flag to hardcode \$libdir into
-# a binary during linking. This must work even if \$libdir does
-# not exist.
-hardcode_libdir_flag_spec_ld=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)
+          # Test if we are trying to use run time linking or normal
+          # AIX style linking. If -brtl is somewhere in LDFLAGS, we
+          # need to do runtime linking.
+          case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*)
+	    for ld_flag in $LDFLAGS; do
+	      case $ld_flag in
+	      *-brtl*)
+	        aix_use_runtimelinking=yes
+	        break
+	        ;;
+	      esac
+	    done
+	    ;;
+          esac
 
-# Whether we need a single -rpath flag with a separated argument.
-hardcode_libdir_separator=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_separator, $1)
+          exp_sym_flag='-bexport'
+          no_entry_flag='-bnoentry'
+        fi
 
-# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the
-# resulting binary.
-hardcode_direct=$_LT_AC_TAGVAR(hardcode_direct, $1)
+        # When large executables or shared objects are built, AIX ld can
+        # have problems creating the table of contents.  If linking a library
+        # or program results in "error TOC overflow" add -mminimal-toc to
+        # CXXFLAGS/CFLAGS for g++/gcc.  In the cases where that is not
+        # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
+
+        _LT_TAGVAR(archive_cmds, $1)=''
+        _LT_TAGVAR(hardcode_direct, $1)=yes
+        _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
+        _LT_TAGVAR(hardcode_libdir_separator, $1)=':'
+        _LT_TAGVAR(link_all_deplibs, $1)=yes
+        _LT_TAGVAR(file_list_spec, $1)='${wl}-f,'
+
+        if test "$GXX" = yes; then
+          case $host_os in aix4.[[012]]|aix4.[[012]].*)
+          # We only want to do this on AIX 4.2 and lower, the check
+          # below for broken collect2 doesn't work under 4.3+
+	  collect2name=`${CC} -print-prog-name=collect2`
+	  if test -f "$collect2name" &&
+	     strings "$collect2name" | $GREP resolve_lib_name >/dev/null
+	  then
+	    # We have reworked collect2
+	    :
+	  else
+	    # We have old collect2
+	    _LT_TAGVAR(hardcode_direct, $1)=unsupported
+	    # It fails to find uninstalled libraries when the uninstalled
+	    # path is not listed in the libpath.  Setting hardcode_minus_L
+	    # to unsupported forces relinking
+	    _LT_TAGVAR(hardcode_minus_L, $1)=yes
+	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+	    _LT_TAGVAR(hardcode_libdir_separator, $1)=
+	  fi
+          esac
+          shared_flag='-shared'
+	  if test "$aix_use_runtimelinking" = yes; then
+	    shared_flag="$shared_flag "'${wl}-G'
+	  fi
+        else
+          # not using gcc
+          if test "$host_cpu" = ia64; then
+	  # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
+	  # chokes on -Wl,-G. The following line is correct:
+	  shared_flag='-G'
+          else
+	    if test "$aix_use_runtimelinking" = yes; then
+	      shared_flag='${wl}-G'
+	    else
+	      shared_flag='${wl}-bM:SRE'
+	    fi
+          fi
+        fi
 
-# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
-# resulting binary.
-hardcode_minus_L=$_LT_AC_TAGVAR(hardcode_minus_L, $1)
+        _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-bexpall'
+        # It seems that -bexpall does not export symbols beginning with
+        # underscore (_), so it is better to generate a list of symbols to
+	# export.
+        _LT_TAGVAR(always_export_symbols, $1)=yes
+        if test "$aix_use_runtimelinking" = yes; then
+          # Warning - without using the other runtime loading flags (-brtl),
+          # -berok will link without error, but may produce a broken library.
+          _LT_TAGVAR(allow_undefined_flag, $1)='-berok'
+          # Determine the default libpath from the value encoded in an empty
+          # executable.
+          _LT_SYS_MODULE_PATH_AIX
+          _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
 
-# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into
-# the resulting binary.
-hardcode_shlibpath_var=$_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)
+          _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then $ECHO "X${wl}${allow_undefined_flag}" | $Xsed; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+        else
+          if test "$host_cpu" = ia64; then
+	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
+	    _LT_TAGVAR(allow_undefined_flag, $1)="-z nodefs"
+	    _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
+          else
+	    # Determine the default libpath from the value encoded in an
+	    # empty executable.
+	    _LT_SYS_MODULE_PATH_AIX
+	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
+	    # Warning - without using the other run time loading flags,
+	    # -berok will link without error, but may produce a broken library.
+	    _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
+	    _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
+	    # Exported symbols can be pulled into shared objects from archives
+	    _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
+	    _LT_TAGVAR(archive_cmds_need_lc, $1)=yes
+	    # This is similar to how AIX traditionally builds its shared
+	    # libraries.
+	    _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
+          fi
+        fi
+        ;;
 
-# Set to yes if building a shared library automatically hardcodes DIR into the library
-# and all subsequent libraries and executables linked against it.
-hardcode_automatic=$_LT_AC_TAGVAR(hardcode_automatic, $1)
+      beos*)
+	if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+	  _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+	  # Joseph Beckenbach <jrb3@best.com> says some releases of gcc
+	  # support --undefined.  This deserves some investigation.  FIXME
+	  _LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	else
+	  _LT_TAGVAR(ld_shlibs, $1)=no
+	fi
+	;;
 
-# Variables whose values should be saved in libtool wrapper scripts and
-# restored at relink time.
-variables_saved_for_relink="$variables_saved_for_relink"
+      chorus*)
+        case $cc_basename in
+          *)
+	  # FIXME: insert proper C++ library support
+	  _LT_TAGVAR(ld_shlibs, $1)=no
+	  ;;
+        esac
+        ;;
 
-# Whether libtool must link a program against all its dependency libraries.
-link_all_deplibs=$_LT_AC_TAGVAR(link_all_deplibs, $1)
+      cygwin* | mingw* | pw32* | cegcc*)
+        # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
+        # as there is no search path for DLLs.
+        _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+        _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+        _LT_TAGVAR(always_export_symbols, $1)=no
+        _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+
+        if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
+          _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+          # If the export-symbols file already is a .def file (1st line
+          # is EXPORTS), use it as is; otherwise, prepend...
+          _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
+	    cp $export_symbols $output_objdir/$soname.def;
+          else
+	    echo EXPORTS > $output_objdir/$soname.def;
+	    cat $export_symbols >> $output_objdir/$soname.def;
+          fi~
+          $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+        else
+          _LT_TAGVAR(ld_shlibs, $1)=no
+        fi
+        ;;
+      darwin* | rhapsody*)
+        _LT_DARWIN_LINKER_FEATURES($1)
+	;;
 
-# Compile-time system search path for libraries
-sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
+      dgux*)
+        case $cc_basename in
+          ec++*)
+	    # FIXME: insert proper C++ library support
+	    _LT_TAGVAR(ld_shlibs, $1)=no
+	    ;;
+          ghcx*)
+	    # Green Hills C++ Compiler
+	    # FIXME: insert proper C++ library support
+	    _LT_TAGVAR(ld_shlibs, $1)=no
+	    ;;
+          *)
+	    # FIXME: insert proper C++ library support
+	    _LT_TAGVAR(ld_shlibs, $1)=no
+	    ;;
+        esac
+        ;;
 
-# Run-time system search path for libraries
-sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
+      freebsd[[12]]*)
+        # C++ shared libraries reported to be fairly broken before
+	# switch to ELF
+        _LT_TAGVAR(ld_shlibs, $1)=no
+        ;;
 
-# Fix the shell variable \$srcfile for the compiler.
-fix_srcfile_path=$lt_fix_srcfile_path
+      freebsd-elf*)
+        _LT_TAGVAR(archive_cmds_need_lc, $1)=no
+        ;;
 
-# Set to yes if exported symbols are required.
-always_export_symbols=$_LT_AC_TAGVAR(always_export_symbols, $1)
+      freebsd* | dragonfly*)
+        # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF
+        # conventions
+        _LT_TAGVAR(ld_shlibs, $1)=yes
+        ;;
 
-# The commands to list exported symbols.
-export_symbols_cmds=$lt_[]_LT_AC_TAGVAR(export_symbols_cmds, $1)
+      gnu*)
+        ;;
 
-# The commands to extract the exported symbol list from a shared archive.
-extract_expsyms_cmds=$lt_extract_expsyms_cmds
+      hpux9*)
+        _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+        _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+        _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+        _LT_TAGVAR(hardcode_direct, $1)=yes
+        _LT_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
+				             # but as the default
+				             # location of the library.
+
+        case $cc_basename in
+          CC*)
+            # FIXME: insert proper C++ library support
+            _LT_TAGVAR(ld_shlibs, $1)=no
+            ;;
+          aCC*)
+            _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+            # Commands to make compiler produce verbose output that lists
+            # what "hidden" libraries, object files and flags are used when
+            # linking a shared library.
+            #
+            # There doesn't appear to be a way to prevent this compiler from
+            # explicitly linking system object files so we need to strip them
+            # from the output so that they don't get included in the library
+            # dependencies.
+            output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $EGREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed'
+            ;;
+          *)
+            if test "$GXX" = yes; then
+              _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared -nostdlib -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+            else
+              # FIXME: insert proper C++ library support
+              _LT_TAGVAR(ld_shlibs, $1)=no
+            fi
+            ;;
+        esac
+        ;;
 
-# Symbols that should not be listed in the preloaded symbols.
-exclude_expsyms=$lt_[]_LT_AC_TAGVAR(exclude_expsyms, $1)
+      hpux10*|hpux11*)
+        if test $with_gnu_ld = no; then
+	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+	  _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+
+          case $host_cpu in
+            hppa*64*|ia64*)
+              ;;
+            *)
+	      _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+              ;;
+          esac
+        fi
+        case $host_cpu in
+          hppa*64*|ia64*)
+            _LT_TAGVAR(hardcode_direct, $1)=no
+            _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+            ;;
+          *)
+            _LT_TAGVAR(hardcode_direct, $1)=yes
+            _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
+            _LT_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
+					         # but as the default
+					         # location of the library.
+            ;;
+        esac
+
+        case $cc_basename in
+          CC*)
+	    # FIXME: insert proper C++ library support
+	    _LT_TAGVAR(ld_shlibs, $1)=no
+	    ;;
+          aCC*)
+	    case $host_cpu in
+	      hppa*64*)
+	        _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	        ;;
+	      ia64*)
+	        _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	        ;;
+	      *)
+	        _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	        ;;
+	    esac
+	    # Commands to make compiler produce verbose output that lists
+	    # what "hidden" libraries, object files and flags are used when
+	    # linking a shared library.
+	    #
+	    # There doesn't appear to be a way to prevent this compiler from
+	    # explicitly linking system object files so we need to strip them
+	    # from the output so that they don't get included in the library
+	    # dependencies.
+	    output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $GREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed'
+	    ;;
+          *)
+	    if test "$GXX" = yes; then
+	      if test $with_gnu_ld = no; then
+	        case $host_cpu in
+	          hppa*64*)
+	            _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	            ;;
+	          ia64*)
+	            _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	            ;;
+	          *)
+	            _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	            ;;
+	        esac
+	      fi
+	    else
+	      # FIXME: insert proper C++ library support
+	      _LT_TAGVAR(ld_shlibs, $1)=no
+	    fi
+	    ;;
+        esac
+        ;;
 
-# Symbols that must always be exported.
-include_expsyms=$lt_[]_LT_AC_TAGVAR(include_expsyms, $1)
+      interix[[3-9]]*)
+	_LT_TAGVAR(hardcode_direct, $1)=no
+	_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+	_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+	_LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+	# Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
+	# Instead, shared libraries are loaded at an image base (0x10000000 by
+	# default) and relocated if they conflict, which is a slow very memory
+	# consuming and fragmenting process.  To avoid this, we pick a random,
+	# 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
+	# time.  Moving up from 0x10000000 also allows more sbrk(2) space.
+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+	_LT_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+	;;
+      irix5* | irix6*)
+        case $cc_basename in
+          CC*)
+	    # SGI C++
+	    _LT_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
+
+	    # Archives containing C++ object files must be created using
+	    # "CC -ar", where "CC" is the IRIX C++ compiler.  This is
+	    # necessary to make sure instantiated templates are included
+	    # in the archive.
+	    _LT_TAGVAR(old_archive_cmds, $1)='$CC -ar -WR,-u -o $oldlib $oldobjs'
+	    ;;
+          *)
+	    if test "$GXX" = yes; then
+	      if test "$with_gnu_ld" = no; then
+	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+	      else
+	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` -o $lib'
+	      fi
+	    fi
+	    _LT_TAGVAR(link_all_deplibs, $1)=yes
+	    ;;
+        esac
+        _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+        _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+        _LT_TAGVAR(inherit_rpath, $1)=yes
+        ;;
 
-ifelse([$1],[],
-[# ### END LIBTOOL CONFIG],
-[# ### END LIBTOOL TAG CONFIG: $tagname])
+      linux* | k*bsd*-gnu)
+        case $cc_basename in
+          KCC*)
+	    # Kuck and Associates, Inc. (KAI) C++ Compiler
+
+	    # KCC will only create a shared library if the output file
+	    # ends with ".so" (or ".sl" for HP-UX), so rename the library
+	    # to its proper name (with version) after linking.
+	    _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
+	    _LT_TAGVAR(archive_expsym_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib'
+	    # Commands to make compiler produce verbose output that lists
+	    # what "hidden" libraries, object files and flags are used when
+	    # linking a shared library.
+	    #
+	    # There doesn't appear to be a way to prevent this compiler from
+	    # explicitly linking system object files so we need to strip them
+	    # from the output so that they don't get included in the library
+	    # dependencies.
+	    output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | $GREP "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed'
+
+	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+	    _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+
+	    # Archives containing C++ object files must be created using
+	    # "CC -Bstatic", where "CC" is the KAI C++ compiler.
+	    _LT_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs'
+	    ;;
+	  icpc* | ecpc* )
+	    # Intel C++
+	    with_gnu_ld=yes
+	    # version 8.0 and above of icpc choke on multiply defined symbols
+	    # if we add $predep_objects and $postdep_objects, however 7.1 and
+	    # earlier do not add the objects themselves.
+	    case `$CC -V 2>&1` in
+	      *"Version 7."*)
+	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
+		_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+		;;
+	      *)  # Version 8.0 or newer
+	        tmp_idyn=
+	        case $host_cpu in
+		  ia64*) tmp_idyn=' -i_dynamic';;
+		esac
+	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+		_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+		;;
+	    esac
+	    _LT_TAGVAR(archive_cmds_need_lc, $1)=no
+	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+	    _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+	    _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
+	    ;;
+          pgCC* | pgcpp*)
+            # Portland Group C++ compiler
+	    case `$CC -V` in
+	    *pgCC\ [[1-5]]* | *pgcpp\ [[1-5]]*)
+	      _LT_TAGVAR(prelink_cmds, $1)='tpldir=Template.dir~
+		rm -rf $tpldir~
+		$CC --prelink_objects --instantiation_dir $tpldir $objs $libobjs $compile_deplibs~
+		compile_command="$compile_command `find $tpldir -name \*.o | $NL2SP`"'
+	      _LT_TAGVAR(old_archive_cmds, $1)='tpldir=Template.dir~
+		rm -rf $tpldir~
+		$CC --prelink_objects --instantiation_dir $tpldir $oldobjs$old_deplibs~
+		$AR $AR_FLAGS $oldlib$oldobjs$old_deplibs `find $tpldir -name \*.o | $NL2SP`~
+		$RANLIB $oldlib'
+	      _LT_TAGVAR(archive_cmds, $1)='tpldir=Template.dir~
+		rm -rf $tpldir~
+		$CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~
+		$CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
+	      _LT_TAGVAR(archive_expsym_cmds, $1)='tpldir=Template.dir~
+		rm -rf $tpldir~
+		$CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~
+		$CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
+	      ;;
+	    *) # Version 6 will use weak symbols
+	      _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
+	      _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
+	      ;;
+	    esac
 
-__EOF__
+	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir'
+	    _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+	    _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
+            ;;
+	  cxx*)
+	    # Compaq C++
+	    _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	    _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname  -o $lib ${wl}-retain-symbols-file $wl$export_symbols'
 
-ifelse([$1],[], [
-  case $host_os in
-  aix3*)
-    cat <<\EOF >> "$cfgfile"
+	    runpath_var=LD_RUN_PATH
+	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
+	    _LT_TAGVAR(hardcode_libdir_separator, $1)=:
 
-# AIX sometimes has problems with the GCC collect2 program.  For some
-# reason, if we set the COLLECT_NAMES environment variable, the problems
-# vanish in a puff of smoke.
-if test "X${COLLECT_NAMES+set}" != Xset; then
-  COLLECT_NAMES=
-  export COLLECT_NAMES
-fi
-EOF
-    ;;
-  esac
+	    # Commands to make compiler produce verbose output that lists
+	    # what "hidden" libraries, object files and flags are used when
+	    # linking a shared library.
+	    #
+	    # There doesn't appear to be a way to prevent this compiler from
+	    # explicitly linking system object files so we need to strip them
+	    # from the output so that they don't get included in the library
+	    # dependencies.
+	    output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld"`; templist=`$ECHO "X$templist" | $Xsed -e "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed'
+	    ;;
+	  xl*)
+	    # IBM XL 8.0 on PPC, with GNU ld
+	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+	    _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+	    _LT_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	    if test "x$supports_anon_versioning" = xyes; then
+	      _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~
+		cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+		echo "local: *; };" >> $output_objdir/$libname.ver~
+		$CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
+	    fi
+	    ;;
+	  *)
+	    case `$CC -V 2>&1 | sed 5q` in
+	    *Sun\ C*)
+	      # Sun C++ 5.9
+	      _LT_TAGVAR(no_undefined_flag, $1)=' -zdefs'
+	      _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	      _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file ${wl}$export_symbols'
+	      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+	      _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
+	      _LT_TAGVAR(compiler_needs_object, $1)=yes
+
+	      # Not sure whether something based on
+	      # $CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1
+	      # would be better.
+	      output_verbose_link_cmd='echo'
+
+	      # Archives containing C++ object files must be created using
+	      # "CC -xar", where "CC" is the Sun C++ compiler.  This is
+	      # necessary to make sure instantiated templates are included
+	      # in the archive.
+	      _LT_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs'
+	      ;;
+	    esac
+	    ;;
+	esac
+	;;
 
-  # We use sed instead of cat because bash on DJGPP gets confused if
-  # if finds mixed CR/LF and LF-only lines.  Since sed operates in
-  # text mode, it properly converts lines to CR/LF.  This bash problem
-  # is reportedly fixed, but why not run on old versions too?
-  sed '$q' "$ltmain" >> "$cfgfile" || (rm -f "$cfgfile"; exit 1)
+      lynxos*)
+        # FIXME: insert proper C++ library support
+	_LT_TAGVAR(ld_shlibs, $1)=no
+	;;
 
-  mv -f "$cfgfile" "$ofile" || \
-    (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")
-  chmod +x "$ofile"
-])
-else
-  # If there is no Makefile yet, we rely on a make rule to execute
-  # `config.status --recheck' to rerun these tests and create the
-  # libtool script then.
-  ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'`
-  if test -f "$ltmain_in"; then
-    test -f Makefile && make "$ltmain"
-  fi
-fi
-])# AC_LIBTOOL_CONFIG
+      m88k*)
+        # FIXME: insert proper C++ library support
+        _LT_TAGVAR(ld_shlibs, $1)=no
+	;;
 
+      mvs*)
+        case $cc_basename in
+          cxx*)
+	    # FIXME: insert proper C++ library support
+	    _LT_TAGVAR(ld_shlibs, $1)=no
+	    ;;
+	  *)
+	    # FIXME: insert proper C++ library support
+	    _LT_TAGVAR(ld_shlibs, $1)=no
+	    ;;
+	esac
+	;;
 
-# AC_LIBTOOL_PROG_COMPILER_NO_RTTI([TAGNAME])
-# -------------------------------------------
-AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_NO_RTTI],
-[AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl
+      netbsd*)
+        if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+	  _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable  -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags'
+	  wlarc=
+	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+	  _LT_TAGVAR(hardcode_direct, $1)=yes
+	  _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+	fi
+	# Workaround some broken pre-1.5 toolchains
+	output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"'
+	;;
 
-_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=
+      *nto* | *qnx*)
+        _LT_TAGVAR(ld_shlibs, $1)=yes
+	;;
 
-if test "$GCC" = yes; then
-  _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin'
+      openbsd2*)
+        # C++ shared libraries are fairly broken
+	_LT_TAGVAR(ld_shlibs, $1)=no
+	;;
+
+      openbsd*)
+	if test -f /usr/libexec/ld.so; then
+	  _LT_TAGVAR(hardcode_direct, $1)=yes
+	  _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+	  _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
+	  _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
+	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+	  if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+	    _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib'
+	    _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+	    _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+	  fi
+	  output_verbose_link_cmd=echo
+	else
+	  _LT_TAGVAR(ld_shlibs, $1)=no
+	fi
+	;;
 
-  AC_LIBTOOL_COMPILER_OPTION([if $compiler supports -fno-rtti -fno-exceptions],
-    lt_cv_prog_compiler_rtti_exceptions,
-    [-fno-rtti -fno-exceptions], [],
-    [_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)="$_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) -fno-rtti -fno-exceptions"])
-fi
-])# AC_LIBTOOL_PROG_COMPILER_NO_RTTI
+      osf3* | osf4* | osf5*)
+        case $cc_basename in
+          KCC*)
+	    # Kuck and Associates, Inc. (KAI) C++ Compiler
+
+	    # KCC will only create a shared library if the output file
+	    # ends with ".so" (or ".sl" for HP-UX), so rename the library
+	    # to its proper name (with version) after linking.
+	    _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo "$lib" | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
+
+	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+	    _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+
+	    # Archives containing C++ object files must be created using
+	    # the KAI C++ compiler.
+	    case $host in
+	      osf3*) _LT_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs' ;;
+	      *) _LT_TAGVAR(old_archive_cmds, $1)='$CC -o $oldlib $oldobjs' ;;
+	    esac
+	    ;;
+          RCC*)
+	    # Rational C++ 2.4.1
+	    # FIXME: insert proper C++ library support
+	    _LT_TAGVAR(ld_shlibs, $1)=no
+	    ;;
+          cxx*)
+	    case $host in
+	      osf3*)
+	        _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
+	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && $ECHO "X${wl}-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
+	        _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+		;;
+	      *)
+	        _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
+	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
+	        _LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~
+	          echo "-hidden">> $lib.exp~
+	          $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname ${wl}-input ${wl}$lib.exp  `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib~
+	          $RM $lib.exp'
+	        _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
+		;;
+	    esac
 
+	    _LT_TAGVAR(hardcode_libdir_separator, $1)=:
 
-# AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE
-# ---------------------------------
-AC_DEFUN([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE],
-[AC_REQUIRE([AC_CANONICAL_HOST])
-AC_REQUIRE([LT_AC_PROG_SED])
-AC_REQUIRE([AC_PROG_NM])
-AC_REQUIRE([AC_OBJEXT])
-# Check for command to grab the raw symbol name followed by C symbol from nm.
-AC_MSG_CHECKING([command to parse $NM output from $compiler object])
-AC_CACHE_VAL([lt_cv_sys_global_symbol_pipe],
-[
-# These are sane defaults that work on at least a few old systems.
-# [They come from Ultrix.  What could be older than Ultrix?!! ;)]
+	    # Commands to make compiler produce verbose output that lists
+	    # what "hidden" libraries, object files and flags are used when
+	    # linking a shared library.
+	    #
+	    # There doesn't appear to be a way to prevent this compiler from
+	    # explicitly linking system object files so we need to strip them
+	    # from the output so that they don't get included in the library
+	    # dependencies.
+	    output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld" | $GREP -v "ld:"`; templist=`$ECHO "X$templist" | $Xsed -e "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed'
+	    ;;
+	  *)
+	    if test "$GXX" = yes && test "$with_gnu_ld" = no; then
+	      _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
+	      case $host in
+	        osf3*)
+	          _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+		  ;;
+	        *)
+	          _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+		  ;;
+	      esac
+
+	      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+	      _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+
+	      # Commands to make compiler produce verbose output that lists
+	      # what "hidden" libraries, object files and flags are used when
+	      # linking a shared library.
+	      output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"'
+
+	    else
+	      # FIXME: insert proper C++ library support
+	      _LT_TAGVAR(ld_shlibs, $1)=no
+	    fi
+	    ;;
+        esac
+        ;;
 
-# Character class describing NM global symbol codes.
-symcode='[[BCDEGRST]]'
+      psos*)
+        # FIXME: insert proper C++ library support
+        _LT_TAGVAR(ld_shlibs, $1)=no
+        ;;
 
-# Regexp to match symbols that can be accessed directly from C.
-sympat='\([[_A-Za-z]][[_A-Za-z0-9]]*\)'
+      sunos4*)
+        case $cc_basename in
+          CC*)
+	    # Sun C++ 4.x
+	    # FIXME: insert proper C++ library support
+	    _LT_TAGVAR(ld_shlibs, $1)=no
+	    ;;
+          lcc*)
+	    # Lucid
+	    # FIXME: insert proper C++ library support
+	    _LT_TAGVAR(ld_shlibs, $1)=no
+	    ;;
+          *)
+	    # FIXME: insert proper C++ library support
+	    _LT_TAGVAR(ld_shlibs, $1)=no
+	    ;;
+        esac
+        ;;
 
-# Transform an extracted symbol line into a proper C declaration
-lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern int \1;/p'"
+      solaris*)
+        case $cc_basename in
+          CC*)
+	    # Sun C++ 4.2, 5.x and Centerline C++
+            _LT_TAGVAR(archive_cmds_need_lc,$1)=yes
+	    _LT_TAGVAR(no_undefined_flag, $1)=' -zdefs'
+	    _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag}  -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	    _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+	      $CC -G${allow_undefined_flag} ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
+
+	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+	    _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+	    case $host_os in
+	      solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
+	      *)
+		# The compiler driver will combine and reorder linker options,
+		# but understands `-z linker_flag'.
+	        # Supported since Solaris 2.6 (maybe 2.5.1?)
+		_LT_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract'
+	        ;;
+	    esac
+	    _LT_TAGVAR(link_all_deplibs, $1)=yes
 
-# Transform an extracted symbol line into symbol name and symbol address
-lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/  {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode \([[^ ]]*\) \([[^ ]]*\)$/  {\"\2\", (lt_ptr) \&\2},/p'"
+	    output_verbose_link_cmd='echo'
 
-# Define system-specific variables.
-case $host_os in
-aix*)
-  symcode='[[BCDT]]'
-  ;;
-cygwin* | mingw* | pw32*)
-  symcode='[[ABCDGISTW]]'
-  ;;
-hpux*) # Its linker distinguishes data from code symbols
-  if test "$host_cpu" = ia64; then
-    symcode='[[ABCDEGRST]]'
-  fi
-  lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
-  lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/  {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/  {\"\2\", (lt_ptr) \&\2},/p'"
-  ;;
-linux* | k*bsd*-gnu)
-  if test "$host_cpu" = ia64; then
-    symcode='[[ABCDGIRSTW]]'
-    lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
-    lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/  {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/  {\"\2\", (lt_ptr) \&\2},/p'"
-  fi
-  ;;
-irix* | nonstopux*)
-  symcode='[[BCDEGRST]]'
-  ;;
-osf*)
-  symcode='[[BCDEGQRST]]'
-  ;;
-solaris*)
-  symcode='[[BDRT]]'
-  ;;
-sco3.2v5*)
-  symcode='[[DT]]'
-  ;;
-sysv4.2uw2*)
-  symcode='[[DT]]'
-  ;;
-sysv5* | sco5v6* | unixware* | OpenUNIX*)
-  symcode='[[ABDT]]'
-  ;;
-sysv4)
-  symcode='[[DFNSTU]]'
-  ;;
-esac
+	    # Archives containing C++ object files must be created using
+	    # "CC -xar", where "CC" is the Sun C++ compiler.  This is
+	    # necessary to make sure instantiated templates are included
+	    # in the archive.
+	    _LT_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs'
+	    ;;
+          gcx*)
+	    # Green Hills C++ Compiler
+	    _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
 
-# Handle CRLF in mingw tool chain
-opt_cr=
-case $build_os in
-mingw*)
-  opt_cr=`echo 'x\{0,1\}' | tr x '\015'` # option cr in regexp
-  ;;
-esac
+	    # The C++ compiler must be used to create the archive.
+	    _LT_TAGVAR(old_archive_cmds, $1)='$CC $LDFLAGS -archive -o $oldlib $oldobjs'
+	    ;;
+          *)
+	    # GNU C++ compiler with Solaris linker
+	    if test "$GXX" = yes && test "$with_gnu_ld" = no; then
+	      _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-z ${wl}defs'
+	      if $CC --version | $GREP -v '^2\.7' > /dev/null; then
+	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
+	        _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+		  $CC -shared -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
+
+	        # Commands to make compiler produce verbose output that lists
+	        # what "hidden" libraries, object files and flags are used when
+	        # linking a shared library.
+	        output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"'
+	      else
+	        # g++ 2.7 appears to require `-G' NOT `-shared' on this
+	        # platform.
+	        _LT_TAGVAR(archive_cmds, $1)='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
+	        _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+		  $CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
+
+	        # Commands to make compiler produce verbose output that lists
+	        # what "hidden" libraries, object files and flags are used when
+	        # linking a shared library.
+	        output_verbose_link_cmd='$CC -G $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"'
+	      fi
+
+	      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $wl$libdir'
+	      case $host_os in
+		solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
+		*)
+		  _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
+		  ;;
+	      esac
+	    fi
+	    ;;
+        esac
+        ;;
 
-# If we're using GNU nm, then use its standard symbol codes.
-case `$NM -V 2>&1` in
-*GNU* | *'with BFD'*)
-  symcode='[[ABCDGIRSTW]]' ;;
-esac
+    sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*)
+      _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
+      _LT_TAGVAR(archive_cmds_need_lc, $1)=no
+      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+      runpath_var='LD_RUN_PATH'
 
-# Try without a prefix undercore, then with it.
-for ac_symprfx in "" "_"; do
+      case $cc_basename in
+        CC*)
+	  _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	*)
+	  _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+      esac
+      ;;
 
-  # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol.
-  symxfrm="\\1 $ac_symprfx\\2 \\2"
+      sysv5* | sco3.2v5* | sco5v6*)
+	# Note: We can NOT use -z defs as we might desire, because we do not
+	# link with -lc, and that would cause any symbols used from libc to
+	# always be unresolved, which means just about no library would
+	# ever link correctly.  If we're not using GNU ld we use -z text
+	# though, which does catch some bad symbols but isn't as heavy-handed
+	# as -z defs.
+	_LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
+	_LT_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs'
+	_LT_TAGVAR(archive_cmds_need_lc, $1)=no
+	_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+	_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R,$libdir'
+	_LT_TAGVAR(hardcode_libdir_separator, $1)=':'
+	_LT_TAGVAR(link_all_deplibs, $1)=yes
+	_LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport'
+	runpath_var='LD_RUN_PATH'
 
-  # Write the raw and C identifiers.
-  lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[ 	]]\($symcode$symcode*\)[[ 	]][[ 	]]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'"
+	case $cc_basename in
+          CC*)
+	    _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	    _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	    ;;
+	  *)
+	    _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	    _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+	    ;;
+	esac
+      ;;
 
-  # Check to see that the pipe works correctly.
-  pipe_works=no
+      tandem*)
+        case $cc_basename in
+          NCC*)
+	    # NonStop-UX NCC 3.20
+	    # FIXME: insert proper C++ library support
+	    _LT_TAGVAR(ld_shlibs, $1)=no
+	    ;;
+          *)
+	    # FIXME: insert proper C++ library support
+	    _LT_TAGVAR(ld_shlibs, $1)=no
+	    ;;
+        esac
+        ;;
 
-  rm -f conftest*
-  cat > conftest.$ac_ext <<EOF
-#ifdef __cplusplus
-extern "C" {
-#endif
-char nm_test_var;
-void nm_test_func(){}
-#ifdef __cplusplus
-}
-#endif
-int main(){nm_test_var='a';nm_test_func();return(0);}
-EOF
+      vxworks*)
+        # FIXME: insert proper C++ library support
+        _LT_TAGVAR(ld_shlibs, $1)=no
+        ;;
 
-  if AC_TRY_EVAL(ac_compile); then
-    # Now try to grab the symbols.
-    nlist=conftest.nm
-    if AC_TRY_EVAL(NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) && test -s "$nlist"; then
-      # Try sorting and uniquifying the output.
-      if sort "$nlist" | uniq > "$nlist"T; then
-	mv -f "$nlist"T "$nlist"
-      else
-	rm -f "$nlist"T
-      fi
+      *)
+        # FIXME: insert proper C++ library support
+        _LT_TAGVAR(ld_shlibs, $1)=no
+        ;;
+    esac
 
-      # Make sure that we snagged all the symbols we need.
-      if grep ' nm_test_var$' "$nlist" >/dev/null; then
-	if grep ' nm_test_func$' "$nlist" >/dev/null; then
-	  cat <<EOF > conftest.$ac_ext
-#ifdef __cplusplus
-extern "C" {
-#endif
+    AC_MSG_RESULT([$_LT_TAGVAR(ld_shlibs, $1)])
+    test "$_LT_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no
 
-EOF
-	  # Now generate the symbol file.
-	  eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | grep -v main >> conftest.$ac_ext'
+    _LT_TAGVAR(GCC, $1)="$GXX"
+    _LT_TAGVAR(LD, $1)="$LD"
 
-	  cat <<EOF >> conftest.$ac_ext
-#if defined (__STDC__) && __STDC__
-# define lt_ptr_t void *
-#else
-# define lt_ptr_t char *
-# define const
-#endif
+    ## CAVEAT EMPTOR:
+    ## There is no encapsulation within the following macros, do not change
+    ## the running order or otherwise move them around unless you know exactly
+    ## what you are doing...
+    _LT_SYS_HIDDEN_LIBDEPS($1)
+    _LT_COMPILER_PIC($1)
+    _LT_COMPILER_C_O($1)
+    _LT_COMPILER_FILE_LOCKS($1)
+    _LT_LINKER_SHLIBS($1)
+    _LT_SYS_DYNAMIC_LINKER($1)
+    _LT_LINKER_HARDCODE_LIBPATH($1)
+
+    _LT_CONFIG($1)
+  fi # test -n "$compiler"
+
+  CC=$lt_save_CC
+  LDCXX=$LD
+  LD=$lt_save_LD
+  GCC=$lt_save_GCC
+  with_gnu_ld=$lt_save_with_gnu_ld
+  lt_cv_path_LDCXX=$lt_cv_path_LD
+  lt_cv_path_LD=$lt_save_path_LD
+  lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld
+  lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld
+fi # test "$_lt_caught_CXX_error" != yes
 
-/* The mapping between symbol names and symbols. */
-const struct {
-  const char *name;
-  lt_ptr_t address;
-}
-lt_preloaded_symbols[[]] =
-{
-EOF
-	  $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/  {\"\2\", (lt_ptr_t) \&\2},/" < "$nlist" | grep -v main >> conftest.$ac_ext
-	  cat <<\EOF >> conftest.$ac_ext
-  {0, (lt_ptr_t) 0}
-};
+AC_LANG_POP
+])# _LT_LANG_CXX_CONFIG
 
-#ifdef __cplusplus
-}
-#endif
-EOF
-	  # Now try linking the two files.
-	  mv conftest.$ac_objext conftstm.$ac_objext
-	  lt_save_LIBS="$LIBS"
-	  lt_save_CFLAGS="$CFLAGS"
-	  LIBS="conftstm.$ac_objext"
-	  CFLAGS="$CFLAGS$_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)"
-	  if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext}; then
-	    pipe_works=yes
-	  fi
-	  LIBS="$lt_save_LIBS"
-	  CFLAGS="$lt_save_CFLAGS"
-	else
-	  echo "cannot find nm_test_func in $nlist" >&AS_MESSAGE_LOG_FD
-	fi
-      else
-	echo "cannot find nm_test_var in $nlist" >&AS_MESSAGE_LOG_FD
-      fi
-    else
-      echo "cannot run $lt_cv_sys_global_symbol_pipe" >&AS_MESSAGE_LOG_FD
-    fi
-  else
-    echo "$progname: failed program was:" >&AS_MESSAGE_LOG_FD
-    cat conftest.$ac_ext >&5
-  fi
-  rm -rf conftest* conftst*
 
-  # Do not use the global_symbol_pipe unless it works.
-  if test "$pipe_works" = yes; then
-    break
-  else
-    lt_cv_sys_global_symbol_pipe=
-  fi
-done
+# _LT_SYS_HIDDEN_LIBDEPS([TAGNAME])
+# ---------------------------------
+# Figure out "hidden" library dependencies from verbose
+# compiler output when linking a shared library.
+# Parse the compiler output and extract the necessary
+# objects, libraries and library flags.
+m4_defun([_LT_SYS_HIDDEN_LIBDEPS],
+[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+# Dependencies to place before and after the object being linked:
+_LT_TAGVAR(predep_objects, $1)=
+_LT_TAGVAR(postdep_objects, $1)=
+_LT_TAGVAR(predeps, $1)=
+_LT_TAGVAR(postdeps, $1)=
+_LT_TAGVAR(compiler_lib_search_path, $1)=
+
+dnl we can't use the lt_simple_compile_test_code here,
+dnl because it contains code intended for an executable,
+dnl not a library.  It's possible we should let each
+dnl tag define a new lt_????_link_test_code variable,
+dnl but it's only used here...
+m4_if([$1], [], [cat > conftest.$ac_ext <<_LT_EOF
+int a;
+void foo (void) { a = 0; }
+_LT_EOF
+], [$1], [CXX], [cat > conftest.$ac_ext <<_LT_EOF
+class Foo
+{
+public:
+  Foo (void) { a = 0; }
+private:
+  int a;
+};
+_LT_EOF
+], [$1], [F77], [cat > conftest.$ac_ext <<_LT_EOF
+      subroutine foo
+      implicit none
+      integer*4 a
+      a=0
+      return
+      end
+_LT_EOF
+], [$1], [FC], [cat > conftest.$ac_ext <<_LT_EOF
+      subroutine foo
+      implicit none
+      integer a
+      a=0
+      return
+      end
+_LT_EOF
+], [$1], [GCJ], [cat > conftest.$ac_ext <<_LT_EOF
+public class foo {
+  private int a;
+  public void bar (void) {
+    a = 0;
+  }
+};
+_LT_EOF
 ])
-if test -z "$lt_cv_sys_global_symbol_pipe"; then
-  lt_cv_sys_global_symbol_to_cdecl=
-fi
-if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then
-  AC_MSG_RESULT(failed)
+dnl Parse the compiler output and extract the necessary
+dnl objects, libraries and library flags.
+if AC_TRY_EVAL(ac_compile); then
+  # Parse the compiler output and extract the necessary
+  # objects, libraries and library flags.
+
+  # Sentinel used to keep track of whether or not we are before
+  # the conftest object file.
+  pre_test_object_deps_done=no
+
+  for p in `eval "$output_verbose_link_cmd"`; do
+    case $p in
+
+    -L* | -R* | -l*)
+       # Some compilers place space between "-{L,R}" and the path.
+       # Remove the space.
+       if test $p = "-L" ||
+          test $p = "-R"; then
+	 prev=$p
+	 continue
+       else
+	 prev=
+       fi
+
+       if test "$pre_test_object_deps_done" = no; then
+	 case $p in
+	 -L* | -R*)
+	   # Internal compiler library paths should come after those
+	   # provided the user.  The postdeps already come after the
+	   # user supplied libs so there is no need to process them.
+	   if test -z "$_LT_TAGVAR(compiler_lib_search_path, $1)"; then
+	     _LT_TAGVAR(compiler_lib_search_path, $1)="${prev}${p}"
+	   else
+	     _LT_TAGVAR(compiler_lib_search_path, $1)="${_LT_TAGVAR(compiler_lib_search_path, $1)} ${prev}${p}"
+	   fi
+	   ;;
+	 # The "-l" case would never come before the object being
+	 # linked, so don't bother handling this case.
+	 esac
+       else
+	 if test -z "$_LT_TAGVAR(postdeps, $1)"; then
+	   _LT_TAGVAR(postdeps, $1)="${prev}${p}"
+	 else
+	   _LT_TAGVAR(postdeps, $1)="${_LT_TAGVAR(postdeps, $1)} ${prev}${p}"
+	 fi
+       fi
+       ;;
+
+    *.$objext)
+       # This assumes that the test object file only shows up
+       # once in the compiler output.
+       if test "$p" = "conftest.$objext"; then
+	 pre_test_object_deps_done=yes
+	 continue
+       fi
+
+       if test "$pre_test_object_deps_done" = no; then
+	 if test -z "$_LT_TAGVAR(predep_objects, $1)"; then
+	   _LT_TAGVAR(predep_objects, $1)="$p"
+	 else
+	   _LT_TAGVAR(predep_objects, $1)="$_LT_TAGVAR(predep_objects, $1) $p"
+	 fi
+       else
+	 if test -z "$_LT_TAGVAR(postdep_objects, $1)"; then
+	   _LT_TAGVAR(postdep_objects, $1)="$p"
+	 else
+	   _LT_TAGVAR(postdep_objects, $1)="$_LT_TAGVAR(postdep_objects, $1) $p"
+	 fi
+       fi
+       ;;
+
+    *) ;; # Ignore the rest.
+
+    esac
+  done
+
+  # Clean up.
+  rm -f a.out a.exe
 else
-  AC_MSG_RESULT(ok)
+  echo "libtool.m4: error: problem compiling $1 test program"
 fi
-]) # AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE
 
+$RM -f confest.$objext
 
-# AC_LIBTOOL_PROG_COMPILER_PIC([TAGNAME])
-# ---------------------------------------
-AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_PIC],
-[_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)=
-_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
-_LT_AC_TAGVAR(lt_prog_compiler_static, $1)=
+# PORTME: override above test on systems where it is broken
+m4_if([$1], [CXX],
+[case $host_os in
+interix[[3-9]]*)
+  # Interix 3.5 installs completely hosed .la files for C++, so rather than
+  # hack all around it, let's just trust "g++" to DTRT.
+  _LT_TAGVAR(predep_objects,$1)=
+  _LT_TAGVAR(postdep_objects,$1)=
+  _LT_TAGVAR(postdeps,$1)=
+  ;;
 
-AC_MSG_CHECKING([for $compiler option to produce PIC])
- ifelse([$1],[CXX],[
-  # C++ specific cases for pic, static, wl, etc.
-  if test "$GXX" = yes; then
-    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-    _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static'
+linux*)
+  case `$CC -V 2>&1 | sed 5q` in
+  *Sun\ C*)
+    # Sun C++ 5.9
 
-    case $host_os in
-    aix*)
-      # All AIX code is PIC.
-      if test "$host_cpu" = ia64; then
-	# AIX 5 now supports IA64 processor
-	_LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-      fi
-      ;;
-    amigaos*)
-      # FIXME: we need at least 68020 code to build shared libraries, but
-      # adding the `-m68020' flag to GCC prevents building anything better,
-      # like `-m68040'.
-      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4'
-      ;;
-    beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
-      # PIC is the default for these OSes.
-      ;;
-    mingw* | cygwin* | os2* | pw32*)
-      # This hack is so that the source file can tell whether it is being
-      # built for inclusion in a dll (and should export symbols for example).
-      # Although the cygwin gcc ignores -fPIC, still need this for old-style
-      # (--disable-auto-import) libraries
-      m4_if([$1], [GCJ], [],
-	[_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
-      ;;
-    darwin* | rhapsody*)
-      # PIC is the default on this platform
-      # Common symbols not allowed in MH_DYLIB files
-      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'
-      ;;
-    *djgpp*)
-      # DJGPP does not support shared libraries at all
-      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
-      ;;
-    interix[[3-9]]*)
-      # Interix 3.x gcc -fpic/-fPIC options generate broken code.
-      # Instead, we relocate shared libraries at runtime.
-      ;;
-    sysv4*MP*)
-      if test -d /usr/nec; then
-	_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic
-      fi
-      ;;
-    hpux*)
-      # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
-      # not for PA HP-UX.
-      case $host_cpu in
-      hppa*64*|ia64*)
-	;;
-      *)
-	_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
-	;;
-      esac
+    # The more standards-conforming stlport4 library is
+    # incompatible with the Cstd library. Avoid specifying
+    # it if it's in CXXFLAGS. Ignore libCrun as
+    # -library=stlport4 depends on it.
+    case " $CXX $CXXFLAGS " in
+    *" -library=stlport4 "*)
+      solaris_use_stlport4=yes
       ;;
-    *)
-      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+    esac
+
+    if test "$solaris_use_stlport4" != yes; then
+      _LT_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun'
+    fi
+    ;;
+  esac
+  ;;
+
+solaris*)
+  case $cc_basename in
+  CC*)
+    # The more standards-conforming stlport4 library is
+    # incompatible with the Cstd library. Avoid specifying
+    # it if it's in CXXFLAGS. Ignore libCrun as
+    # -library=stlport4 depends on it.
+    case " $CXX $CXXFLAGS " in
+    *" -library=stlport4 "*)
+      solaris_use_stlport4=yes
       ;;
     esac
-  else
+
+    # Adding this requires a known-good setup of shared libraries for
+    # Sun compiler versions before 5.6, else PIC objects from an old
+    # archive will be linked into the output, leading to subtle bugs.
+    if test "$solaris_use_stlport4" != yes; then
+      _LT_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun'
+    fi
+    ;;
+  esac
+  ;;
+esac
+])
+
+case " $_LT_TAGVAR(postdeps, $1) " in
+*" -lc "*) _LT_TAGVAR(archive_cmds_need_lc, $1)=no ;;
+esac
+ _LT_TAGVAR(compiler_lib_search_dirs, $1)=
+if test -n "${_LT_TAGVAR(compiler_lib_search_path, $1)}"; then
+ _LT_TAGVAR(compiler_lib_search_dirs, $1)=`echo " ${_LT_TAGVAR(compiler_lib_search_path, $1)}" | ${SED} -e 's! -L! !g' -e 's!^ !!'`
+fi
+_LT_TAGDECL([], [compiler_lib_search_dirs], [1],
+    [The directories searched by this compiler when creating a shared library])
+_LT_TAGDECL([], [predep_objects], [1],
+    [Dependencies to place before and after the objects being linked to
+    create a shared library])
+_LT_TAGDECL([], [postdep_objects], [1])
+_LT_TAGDECL([], [predeps], [1])
+_LT_TAGDECL([], [postdeps], [1])
+_LT_TAGDECL([], [compiler_lib_search_path], [1],
+    [The library search path used internally by the compiler when linking
+    a shared library])
+])# _LT_SYS_HIDDEN_LIBDEPS
+
+
+# _LT_PROG_F77
+# ------------
+# Since AC_PROG_F77 is broken, in that it returns the empty string
+# if there is no fortran compiler, we have our own version here.
+m4_defun([_LT_PROG_F77],
+[
+pushdef([AC_MSG_ERROR], [_lt_disable_F77=yes])
+AC_PROG_F77
+if test -z "$F77" || test "X$F77" = "Xno"; then
+  _lt_disable_F77=yes
+fi
+popdef([AC_MSG_ERROR])
+])# _LT_PROG_F77
+
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([_LT_PROG_F77], [])
+
+
+# _LT_LANG_F77_CONFIG([TAG])
+# --------------------------
+# Ensure that the configuration variables for a Fortran 77 compiler are
+# suitably defined.  These variables are subsequently used by _LT_CONFIG
+# to write the compiler configuration to `libtool'.
+m4_defun([_LT_LANG_F77_CONFIG],
+[AC_REQUIRE([_LT_PROG_F77])dnl
+AC_LANG_PUSH(Fortran 77)
+
+_LT_TAGVAR(archive_cmds_need_lc, $1)=no
+_LT_TAGVAR(allow_undefined_flag, $1)=
+_LT_TAGVAR(always_export_symbols, $1)=no
+_LT_TAGVAR(archive_expsym_cmds, $1)=
+_LT_TAGVAR(export_dynamic_flag_spec, $1)=
+_LT_TAGVAR(hardcode_direct, $1)=no
+_LT_TAGVAR(hardcode_direct_absolute, $1)=no
+_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
+_LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
+_LT_TAGVAR(hardcode_libdir_separator, $1)=
+_LT_TAGVAR(hardcode_minus_L, $1)=no
+_LT_TAGVAR(hardcode_automatic, $1)=no
+_LT_TAGVAR(inherit_rpath, $1)=no
+_LT_TAGVAR(module_cmds, $1)=
+_LT_TAGVAR(module_expsym_cmds, $1)=
+_LT_TAGVAR(link_all_deplibs, $1)=unknown
+_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
+_LT_TAGVAR(no_undefined_flag, $1)=
+_LT_TAGVAR(whole_archive_flag_spec, $1)=
+_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
+
+# Source file extension for f77 test sources.
+ac_ext=f
+
+# Object file extension for compiled f77 test sources.
+objext=o
+_LT_TAGVAR(objext, $1)=$objext
+
+# No sense in running all these tests if we already determined that
+# the F77 compiler isn't working.  Some variables (like enable_shared)
+# are currently assumed to apply to all compilers on this platform,
+# and will be corrupted by setting them based on a non-working compiler.
+if test "$_lt_disable_F77" != yes; then
+  # Code to be used in simple compile tests
+  lt_simple_compile_test_code="\
+      subroutine t
+      return
+      end
+"
+
+  # Code to be used in simple link tests
+  lt_simple_link_test_code="\
+      program t
+      end
+"
+
+  # ltmain only uses $CC for tagged configurations so make sure $CC is set.
+  _LT_TAG_COMPILER
+
+  # save warnings/boilerplate of simple test code
+  _LT_COMPILER_BOILERPLATE
+  _LT_LINKER_BOILERPLATE
+
+  # Allow CC to be a program name with arguments.
+  lt_save_CC="$CC"
+  lt_save_GCC=$GCC
+  CC=${F77-"f77"}
+  compiler=$CC
+  _LT_TAGVAR(compiler, $1)=$CC
+  _LT_CC_BASENAME([$compiler])
+  GCC=$G77
+  if test -n "$compiler"; then
+    AC_MSG_CHECKING([if libtool supports shared libraries])
+    AC_MSG_RESULT([$can_build_shared])
+
+    AC_MSG_CHECKING([whether to build shared libraries])
+    test "$can_build_shared" = "no" && enable_shared=no
+
+    # On AIX, shared libraries and static libraries use the same namespace, and
+    # are all built from PIC.
     case $host_os in
+      aix3*)
+        test "$enable_shared" = yes && enable_static=no
+        if test -n "$RANLIB"; then
+          archive_cmds="$archive_cmds~\$RANLIB \$lib"
+          postinstall_cmds='$RANLIB $lib'
+        fi
+        ;;
       aix[[4-9]]*)
-	# All AIX code is PIC.
-	if test "$host_cpu" = ia64; then
-	  # AIX 5 now supports IA64 processor
-	  _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-	else
-	  _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp'
+	if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
+	  test "$enable_shared" = yes && enable_static=no
 	fi
-	;;
-      chorus*)
-	case $cc_basename in
-	cxch68*)
-	  # Green Hills C++ Compiler
-	  # _LT_AC_TAGVAR(lt_prog_compiler_static, $1)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a"
-	  ;;
-	esac
-	;;
-       darwin*)
-         # PIC is the default on this platform
-         # Common symbols not allowed in MH_DYLIB files
-         case $cc_basename in
-           xlc*)
-           _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-qnocommon'
-           _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-           ;;
-         esac
-       ;;
-      dgux*)
-	case $cc_basename in
-	  ec++*)
-	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-	    ;;
-	  ghcx*)
-	    # Green Hills C++ Compiler
-	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
-	    ;;
-	  *)
-	    ;;
-	esac
-	;;
-      freebsd* | dragonfly*)
-	# FreeBSD uses GNU C++
-	;;
-      hpux9* | hpux10* | hpux11*)
-	case $cc_basename in
-	  CC*)
-	    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-	    _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
-	    if test "$host_cpu" != ia64; then
-	      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
-	    fi
-	    ;;
-	  aCC*)
-	    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-	    _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
-	    case $host_cpu in
-	    hppa*64*|ia64*)
-	      # +Z the default
-	      ;;
-	    *)
-	      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
-	      ;;
-	    esac
-	    ;;
-	  *)
-	    ;;
-	esac
-	;;
-      interix*)
-	# This is c89, which is MS Visual C++ (no shared libs)
-	# Anyone wants to do a port?
-	;;
-      irix5* | irix6* | nonstopux*)
-	case $cc_basename in
-	  CC*)
-	    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-	    _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
-	    # CC pic flag -KPIC is the default.
-	    ;;
-	  *)
-	    ;;
-	esac
-	;;
-      linux* | k*bsd*-gnu)
-	case $cc_basename in
-	  KCC*)
-	    # KAI C++ Compiler
-	    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,'
-	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
-	    ;;
-	  icpc* | ecpc*)
-	    # Intel C++
-	    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-	    _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static'
-	    ;;
-	  pgCC* | pgcpp*)
-	    # Portland Group C++ compiler.
-	    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fpic'
-	    _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-	    ;;
-	  cxx*)
-	    # Compaq C++
-	    # Make sure the PIC flag is empty.  It appears that all Alpha
-	    # Linux and Compaq Tru64 Unix objects are PIC.
-	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
-	    _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
-	    ;;
-	  *)
-	    case `$CC -V 2>&1 | sed 5q` in
-	    *Sun\ C*)
-	      # Sun C++ 5.9
-	      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-	      _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-	      _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
-	      ;;
-	    esac
-	    ;;
-	esac
-	;;
-      lynxos*)
-	;;
-      m88k*)
-	;;
-      mvs*)
-	case $cc_basename in
-	  cxx*)
-	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-W c,exportall'
-	    ;;
-	  *)
-	    ;;
-	esac
-	;;
-      netbsd*)
-	;;
-      osf3* | osf4* | osf5*)
-	case $cc_basename in
-	  KCC*)
-	    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,'
-	    ;;
-	  RCC*)
-	    # Rational C++ 2.4.1
-	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
-	    ;;
-	  cxx*)
-	    # Digital/Compaq C++
-	    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-	    # Make sure the PIC flag is empty.  It appears that all Alpha
-	    # Linux and Compaq Tru64 Unix objects are PIC.
-	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
-	    _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
-	    ;;
-	  *)
-	    ;;
-	esac
-	;;
-      psos*)
-	;;
-      solaris*)
-	case $cc_basename in
-	  CC*)
-	    # Sun C++ 4.2, 5.x and Centerline C++
-	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-	    _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-	    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
-	    ;;
-	  gcx*)
-	    # Green Hills C++ Compiler
-	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
-	    ;;
-	  *)
-	    ;;
-	esac
-	;;
-      sunos4*)
-	case $cc_basename in
-	  CC*)
-	    # Sun C++ 4.x
-	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
-	    _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-	    ;;
-	  lcc*)
-	    # Lucid
-	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
-	    ;;
-	  *)
-	    ;;
-	esac
-	;;
-      tandem*)
-	case $cc_basename in
-	  NCC*)
-	    # NonStop-UX NCC 3.20
-	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-	    ;;
-	  *)
-	    ;;
-	esac
-	;;
-      sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
-	case $cc_basename in
-	  CC*)
-	    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-	    _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-	    ;;
-	esac
-	;;
-      vxworks*)
-	;;
-      *)
-	_LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
-	;;
+        ;;
     esac
-  fi
-],
+    AC_MSG_RESULT([$enable_shared])
+
+    AC_MSG_CHECKING([whether to build static libraries])
+    # Make sure either enable_shared or enable_static is yes.
+    test "$enable_shared" = yes || enable_static=yes
+    AC_MSG_RESULT([$enable_static])
+
+    _LT_TAGVAR(GCC, $1)="$G77"
+    _LT_TAGVAR(LD, $1)="$LD"
+
+    ## CAVEAT EMPTOR:
+    ## There is no encapsulation within the following macros, do not change
+    ## the running order or otherwise move them around unless you know exactly
+    ## what you are doing...
+    _LT_COMPILER_PIC($1)
+    _LT_COMPILER_C_O($1)
+    _LT_COMPILER_FILE_LOCKS($1)
+    _LT_LINKER_SHLIBS($1)
+    _LT_SYS_DYNAMIC_LINKER($1)
+    _LT_LINKER_HARDCODE_LIBPATH($1)
+
+    _LT_CONFIG($1)
+  fi # test -n "$compiler"
+
+  GCC=$lt_save_GCC
+  CC="$lt_save_CC"
+fi # test "$_lt_disable_F77" != yes
+
+AC_LANG_POP
+])# _LT_LANG_F77_CONFIG
+
+
+# _LT_PROG_FC
+# -----------
+# Since AC_PROG_FC is broken, in that it returns the empty string
+# if there is no fortran compiler, we have our own version here.
+m4_defun([_LT_PROG_FC],
 [
-  if test "$GCC" = yes; then
-    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-    _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static'
+pushdef([AC_MSG_ERROR], [_lt_disable_FC=yes])
+AC_PROG_FC
+if test -z "$FC" || test "X$FC" = "Xno"; then
+  _lt_disable_FC=yes
+fi
+popdef([AC_MSG_ERROR])
+])# _LT_PROG_FC
+
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([_LT_PROG_FC], [])
+
+
+# _LT_LANG_FC_CONFIG([TAG])
+# -------------------------
+# Ensure that the configuration variables for a Fortran compiler are
+# suitably defined.  These variables are subsequently used by _LT_CONFIG
+# to write the compiler configuration to `libtool'.
+m4_defun([_LT_LANG_FC_CONFIG],
+[AC_REQUIRE([_LT_PROG_FC])dnl
+AC_LANG_PUSH(Fortran)
+
+_LT_TAGVAR(archive_cmds_need_lc, $1)=no
+_LT_TAGVAR(allow_undefined_flag, $1)=
+_LT_TAGVAR(always_export_symbols, $1)=no
+_LT_TAGVAR(archive_expsym_cmds, $1)=
+_LT_TAGVAR(export_dynamic_flag_spec, $1)=
+_LT_TAGVAR(hardcode_direct, $1)=no
+_LT_TAGVAR(hardcode_direct_absolute, $1)=no
+_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
+_LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
+_LT_TAGVAR(hardcode_libdir_separator, $1)=
+_LT_TAGVAR(hardcode_minus_L, $1)=no
+_LT_TAGVAR(hardcode_automatic, $1)=no
+_LT_TAGVAR(inherit_rpath, $1)=no
+_LT_TAGVAR(module_cmds, $1)=
+_LT_TAGVAR(module_expsym_cmds, $1)=
+_LT_TAGVAR(link_all_deplibs, $1)=unknown
+_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
+_LT_TAGVAR(no_undefined_flag, $1)=
+_LT_TAGVAR(whole_archive_flag_spec, $1)=
+_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
+
+# Source file extension for fc test sources.
+ac_ext=${ac_fc_srcext-f}
+
+# Object file extension for compiled fc test sources.
+objext=o
+_LT_TAGVAR(objext, $1)=$objext
+
+# No sense in running all these tests if we already determined that
+# the FC compiler isn't working.  Some variables (like enable_shared)
+# are currently assumed to apply to all compilers on this platform,
+# and will be corrupted by setting them based on a non-working compiler.
+if test "$_lt_disable_FC" != yes; then
+  # Code to be used in simple compile tests
+  lt_simple_compile_test_code="\
+      subroutine t
+      return
+      end
+"
+
+  # Code to be used in simple link tests
+  lt_simple_link_test_code="\
+      program t
+      end
+"
+
+  # ltmain only uses $CC for tagged configurations so make sure $CC is set.
+  _LT_TAG_COMPILER
+
+  # save warnings/boilerplate of simple test code
+  _LT_COMPILER_BOILERPLATE
+  _LT_LINKER_BOILERPLATE
+
+  # Allow CC to be a program name with arguments.
+  lt_save_CC="$CC"
+  lt_save_GCC=$GCC
+  CC=${FC-"f95"}
+  compiler=$CC
+  GCC=$ac_cv_fc_compiler_gnu
+
+  _LT_TAGVAR(compiler, $1)=$CC
+  _LT_CC_BASENAME([$compiler])
+
+  if test -n "$compiler"; then
+    AC_MSG_CHECKING([if libtool supports shared libraries])
+    AC_MSG_RESULT([$can_build_shared])
+
+    AC_MSG_CHECKING([whether to build shared libraries])
+    test "$can_build_shared" = "no" && enable_shared=no
+
+    # On AIX, shared libraries and static libraries use the same namespace, and
+    # are all built from PIC.
+    case $host_os in
+      aix3*)
+        test "$enable_shared" = yes && enable_static=no
+        if test -n "$RANLIB"; then
+          archive_cmds="$archive_cmds~\$RANLIB \$lib"
+          postinstall_cmds='$RANLIB $lib'
+        fi
+        ;;
+      aix[[4-9]]*)
+	if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
+	  test "$enable_shared" = yes && enable_static=no
+	fi
+        ;;
+    esac
+    AC_MSG_RESULT([$enable_shared])
+
+    AC_MSG_CHECKING([whether to build static libraries])
+    # Make sure either enable_shared or enable_static is yes.
+    test "$enable_shared" = yes || enable_static=yes
+    AC_MSG_RESULT([$enable_static])
+
+    _LT_TAGVAR(GCC, $1)="$ac_cv_fc_compiler_gnu"
+    _LT_TAGVAR(LD, $1)="$LD"
+
+    ## CAVEAT EMPTOR:
+    ## There is no encapsulation within the following macros, do not change
+    ## the running order or otherwise move them around unless you know exactly
+    ## what you are doing...
+    _LT_SYS_HIDDEN_LIBDEPS($1)
+    _LT_COMPILER_PIC($1)
+    _LT_COMPILER_C_O($1)
+    _LT_COMPILER_FILE_LOCKS($1)
+    _LT_LINKER_SHLIBS($1)
+    _LT_SYS_DYNAMIC_LINKER($1)
+    _LT_LINKER_HARDCODE_LIBPATH($1)
+
+    _LT_CONFIG($1)
+  fi # test -n "$compiler"
+
+  GCC=$lt_save_GCC
+  CC="$lt_save_CC"
+fi # test "$_lt_disable_FC" != yes
+
+AC_LANG_POP
+])# _LT_LANG_FC_CONFIG
+
+
+# _LT_LANG_GCJ_CONFIG([TAG])
+# --------------------------
+# Ensure that the configuration variables for the GNU Java Compiler compiler
+# are suitably defined.  These variables are subsequently used by _LT_CONFIG
+# to write the compiler configuration to `libtool'.
+m4_defun([_LT_LANG_GCJ_CONFIG],
+[AC_REQUIRE([LT_PROG_GCJ])dnl
+AC_LANG_SAVE
+
+# Source file extension for Java test sources.
+ac_ext=java
+
+# Object file extension for compiled Java test sources.
+objext=o
+_LT_TAGVAR(objext, $1)=$objext
+
+# Code to be used in simple compile tests
+lt_simple_compile_test_code="class foo {}"
+
+# Code to be used in simple link tests
+lt_simple_link_test_code='public class conftest { public static void main(String[[]] argv) {}; }'
+
+# ltmain only uses $CC for tagged configurations so make sure $CC is set.
+_LT_TAG_COMPILER
+
+# save warnings/boilerplate of simple test code
+_LT_COMPILER_BOILERPLATE
+_LT_LINKER_BOILERPLATE
+
+# Allow CC to be a program name with arguments.
+lt_save_CC="$CC"
+lt_save_GCC=$GCC
+GCC=yes
+CC=${GCJ-"gcj"}
+compiler=$CC
+_LT_TAGVAR(compiler, $1)=$CC
+_LT_TAGVAR(LD, $1)="$LD"
+_LT_CC_BASENAME([$compiler])
 
-    case $host_os in
-      aix*)
-      # All AIX code is PIC.
-      if test "$host_cpu" = ia64; then
-	# AIX 5 now supports IA64 processor
-	_LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-      fi
-      ;;
+# GCJ did not exist at the time GCC didn't implicitly link libc in.
+_LT_TAGVAR(archive_cmds_need_lc, $1)=no
 
-    amigaos*)
-      # FIXME: we need at least 68020 code to build shared libraries, but
-      # adding the `-m68020' flag to GCC prevents building anything better,
-      # like `-m68040'.
-      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4'
-      ;;
+_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
 
-    beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
-      # PIC is the default for these OSes.
-      ;;
+if test -n "$compiler"; then
+  _LT_COMPILER_NO_RTTI($1)
+  _LT_COMPILER_PIC($1)
+  _LT_COMPILER_C_O($1)
+  _LT_COMPILER_FILE_LOCKS($1)
+  _LT_LINKER_SHLIBS($1)
+  _LT_LINKER_HARDCODE_LIBPATH($1)
 
-    mingw* | cygwin* | pw32* | os2*)
-      # This hack is so that the source file can tell whether it is being
-      # built for inclusion in a dll (and should export symbols for example).
-      # Although the cygwin gcc ignores -fPIC, still need this for old-style
-      # (--disable-auto-import) libraries
-      m4_if([$1], [GCJ], [],
-	[_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
-      ;;
+  _LT_CONFIG($1)
+fi
 
-    darwin* | rhapsody*)
-      # PIC is the default on this platform
-      # Common symbols not allowed in MH_DYLIB files
-      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'
-      ;;
+AC_LANG_RESTORE
 
-    interix[[3-9]]*)
-      # Interix 3.x gcc -fpic/-fPIC options generate broken code.
-      # Instead, we relocate shared libraries at runtime.
-      ;;
+GCC=$lt_save_GCC
+CC="$lt_save_CC"
+])# _LT_LANG_GCJ_CONFIG
 
-    msdosdjgpp*)
-      # Just because we use GCC doesn't mean we suddenly get shared libraries
-      # on systems that don't support them.
-      _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
-      enable_shared=no
-      ;;
 
-    sysv4*MP*)
-      if test -d /usr/nec; then
-	_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic
-      fi
-      ;;
+# _LT_LANG_RC_CONFIG([TAG])
+# -------------------------
+# Ensure that the configuration variables for the Windows resource compiler
+# are suitably defined.  These variables are subsequently used by _LT_CONFIG
+# to write the compiler configuration to `libtool'.
+m4_defun([_LT_LANG_RC_CONFIG],
+[AC_REQUIRE([LT_PROG_RC])dnl
+AC_LANG_SAVE
 
-    hpux*)
-      # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
-      # not for PA HP-UX.
-      case $host_cpu in
-      hppa*64*|ia64*)
-	# +Z the default
-	;;
-      *)
-	_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
-	;;
-      esac
-      ;;
+# Source file extension for RC test sources.
+ac_ext=rc
 
-    *)
-      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
-      ;;
-    esac
-  else
-    # PORTME Check for flag to pass linker flags through the system compiler.
-    case $host_os in
-    aix*)
-      _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-      if test "$host_cpu" = ia64; then
-	# AIX 5 now supports IA64 processor
-	_LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-      else
-	_LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp'
-      fi
-      ;;
-      darwin*)
-        # PIC is the default on this platform
-        # Common symbols not allowed in MH_DYLIB files
-       case $cc_basename in
-         xlc*)
-         _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-qnocommon'
-         _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-         ;;
-       esac
-       ;;
+# Object file extension for compiled RC test sources.
+objext=o
+_LT_TAGVAR(objext, $1)=$objext
 
-    mingw* | cygwin* | pw32* | os2*)
-      # This hack is so that the source file can tell whether it is being
-      # built for inclusion in a dll (and should export symbols for example).
-      m4_if([$1], [GCJ], [],
-	[_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
-      ;;
+# Code to be used in simple compile tests
+lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }'
 
-    hpux9* | hpux10* | hpux11*)
-      _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-      # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
-      # not for PA HP-UX.
-      case $host_cpu in
-      hppa*64*|ia64*)
-	# +Z the default
-	;;
-      *)
-	_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
-	;;
-      esac
-      # Is there a better lt_prog_compiler_static that works with the bundled CC?
-      _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
-      ;;
+# Code to be used in simple link tests
+lt_simple_link_test_code="$lt_simple_compile_test_code"
 
-    irix5* | irix6* | nonstopux*)
-      _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-      # PIC (with -KPIC) is the default.
-      _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
-      ;;
+# ltmain only uses $CC for tagged configurations so make sure $CC is set.
+_LT_TAG_COMPILER
 
-    newsos6)
-      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-      _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-      ;;
+# save warnings/boilerplate of simple test code
+_LT_COMPILER_BOILERPLATE
+_LT_LINKER_BOILERPLATE
 
-    linux* | k*bsd*-gnu)
-      case $cc_basename in
-      icc* | ecc*)
-	_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-	_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-	_LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static'
-        ;;
-      pgcc* | pgf77* | pgf90* | pgf95*)
-        # Portland Group compilers (*not* the Pentium gcc compiler,
-	# which looks to be a dead project)
-	_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-	_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fpic'
-	_LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-        ;;
-      ccc*)
-        _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-        # All Alpha code is PIC.
-        _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
-        ;;
-      *)
-        case `$CC -V 2>&1 | sed 5q` in
-	*Sun\ C*)
-	  # Sun C 5.9
-	  _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-	  _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-	  _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-	  ;;
-	*Sun\ F*)
-	  # Sun Fortran 8.3 passes all unrecognized flags to the linker
-	  _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-	  _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-	  _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)=''
-	  ;;
-	esac
-	;;
-      esac
-      ;;
+# Allow CC to be a program name with arguments.
+lt_save_CC="$CC"
+lt_save_GCC=$GCC
+GCC=
+CC=${RC-"windres"}
+compiler=$CC
+_LT_TAGVAR(compiler, $1)=$CC
+_LT_CC_BASENAME([$compiler])
+_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
 
-    osf3* | osf4* | osf5*)
-      _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-      # All OSF/1 code is PIC.
-      _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
-      ;;
+if test -n "$compiler"; then
+  :
+  _LT_CONFIG($1)
+fi
 
-    rdos*)
-      _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
-      ;;
+GCC=$lt_save_GCC
+AC_LANG_RESTORE
+CC="$lt_save_CC"
+])# _LT_LANG_RC_CONFIG
 
-    solaris*)
-      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-      _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-      case $cc_basename in
-      f77* | f90* | f95*)
-	_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ';;
-      *)
-	_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,';;
-      esac
-      ;;
 
-    sunos4*)
-      _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
-      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
-      _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-      ;;
+# LT_PROG_GCJ
+# -----------
+AC_DEFUN([LT_PROG_GCJ],
+[m4_ifdef([AC_PROG_GCJ], [AC_PROG_GCJ],
+  [m4_ifdef([A][M_PROG_GCJ], [A][M_PROG_GCJ],
+    [AC_CHECK_TOOL(GCJ, gcj,)
+      test "x${GCJFLAGS+set}" = xset || GCJFLAGS="-g -O2"
+      AC_SUBST(GCJFLAGS)])])[]dnl
+])
 
-    sysv4 | sysv4.2uw2* | sysv4.3*)
-      _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-      _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-      ;;
+# Old name:
+AU_ALIAS([LT_AC_PROG_GCJ], [LT_PROG_GCJ])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([LT_AC_PROG_GCJ], [])
 
-    sysv4*MP*)
-      if test -d /usr/nec ;then
-	_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-Kconform_pic'
-	_LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-      fi
-      ;;
 
-    sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
-      _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-      _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-      ;;
+# LT_PROG_RC
+# ----------
+AC_DEFUN([LT_PROG_RC],
+[AC_CHECK_TOOL(RC, windres,)
+])
 
-    unicos*)
-      _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-      _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
-      ;;
+# Old name:
+AU_ALIAS([LT_AC_PROG_RC], [LT_PROG_RC])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([LT_AC_PROG_RC], [])
 
-    uts4*)
-      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
-      _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-      ;;
 
-    *)
-      _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
-      ;;
-    esac
-  fi
+# _LT_DECL_EGREP
+# --------------
+# If we don't have a new enough Autoconf to choose the best grep
+# available, choose the one first in the user's PATH.
+m4_defun([_LT_DECL_EGREP],
+[AC_REQUIRE([AC_PROG_EGREP])dnl
+AC_REQUIRE([AC_PROG_FGREP])dnl
+test -z "$GREP" && GREP=grep
+_LT_DECL([], [GREP], [1], [A grep program that handles long lines])
+_LT_DECL([], [EGREP], [1], [An ERE matcher])
+_LT_DECL([], [FGREP], [1], [A literal string matcher])
+dnl Non-bleeding-edge autoconf doesn't subst GREP, so do it here too
+AC_SUBST([GREP])
 ])
-AC_MSG_RESULT([$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)])
 
-#
-# Check to make sure the PIC flag actually works.
-#
-if test -n "$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)"; then
-  AC_LIBTOOL_COMPILER_OPTION([if $compiler PIC flag $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) works],
-    _LT_AC_TAGVAR(lt_cv_prog_compiler_pic_works, $1),
-    [$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)ifelse([$1],[],[ -DPIC],[ifelse([$1],[CXX],[ -DPIC],[])])], [],
-    [case $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) in
-     "" | " "*) ;;
-     *) _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=" $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)" ;;
-     esac],
-    [_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
-     _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no])
-fi
-case $host_os in
-  # For platforms which do not support PIC, -DPIC is meaningless:
-  *djgpp*)
-    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
-    ;;
-  *)
-    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)="$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)ifelse([$1],[],[ -DPIC],[ifelse([$1],[CXX],[ -DPIC],[])])"
-    ;;
-esac
 
-#
-# Check to make sure the static flag actually works.
-#
-wl=$_LT_AC_TAGVAR(lt_prog_compiler_wl, $1) eval lt_tmp_static_flag=\"$_LT_AC_TAGVAR(lt_prog_compiler_static, $1)\"
-AC_LIBTOOL_LINKER_OPTION([if $compiler static flag $lt_tmp_static_flag works],
-  _LT_AC_TAGVAR(lt_cv_prog_compiler_static_works, $1),
-  $lt_tmp_static_flag,
-  [],
-  [_LT_AC_TAGVAR(lt_prog_compiler_static, $1)=])
+# _LT_DECL_OBJDUMP
+# --------------
+# If we don't have a new enough Autoconf to choose the best objdump
+# available, choose the one first in the user's PATH.
+m4_defun([_LT_DECL_OBJDUMP],
+[AC_CHECK_TOOL(OBJDUMP, objdump, false)
+test -z "$OBJDUMP" && OBJDUMP=objdump
+_LT_DECL([], [OBJDUMP], [1], [An object symbol dumper])
+AC_SUBST([OBJDUMP])
+])
+
+
+# _LT_DECL_SED
+# ------------
+# Check for a fully-functional sed program, that truncates
+# as few characters as possible.  Prefer GNU sed if found.
+m4_defun([_LT_DECL_SED],
+[AC_PROG_SED
+test -z "$SED" && SED=sed
+Xsed="$SED -e 1s/^X//"
+_LT_DECL([], [SED], [1], [A sed program that does not truncate output])
+_LT_DECL([], [Xsed], ["\$SED -e 1s/^X//"],
+    [Sed that helps us avoid accidentally triggering echo(1) options like -n])
+])# _LT_DECL_SED
+
+m4_ifndef([AC_PROG_SED], [
+# NOTE: This macro has been submitted for inclusion into   #
+#  GNU Autoconf as AC_PROG_SED.  When it is available in   #
+#  a released version of Autoconf we should remove this    #
+#  macro and use it instead.                               #
+
+m4_defun([AC_PROG_SED],
+[AC_MSG_CHECKING([for a sed that does not truncate output])
+AC_CACHE_VAL(lt_cv_path_SED,
+[# Loop through the user's path and test for sed and gsed.
+# Then use that list of sed's as ones to test for truncation.
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for lt_ac_prog in sed gsed; do
+    for ac_exec_ext in '' $ac_executable_extensions; do
+      if $as_executable_p "$as_dir/$lt_ac_prog$ac_exec_ext"; then
+        lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext"
+      fi
+    done
+  done
+done
+IFS=$as_save_IFS
+lt_ac_max=0
+lt_ac_count=0
+# Add /usr/xpg4/bin/sed as it is typically found on Solaris
+# along with /bin/sed that truncates output.
+for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do
+  test ! -f $lt_ac_sed && continue
+  cat /dev/null > conftest.in
+  lt_ac_count=0
+  echo $ECHO_N "0123456789$ECHO_C" >conftest.in
+  # Check for GNU sed and select it if it is found.
+  if "$lt_ac_sed" --version 2>&1 < /dev/null | grep 'GNU' > /dev/null; then
+    lt_cv_path_SED=$lt_ac_sed
+    break
+  fi
+  while true; do
+    cat conftest.in conftest.in >conftest.tmp
+    mv conftest.tmp conftest.in
+    cp conftest.in conftest.nl
+    echo >>conftest.nl
+    $lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break
+    cmp -s conftest.out conftest.nl || break
+    # 10000 chars as input seems more than enough
+    test $lt_ac_count -gt 10 && break
+    lt_ac_count=`expr $lt_ac_count + 1`
+    if test $lt_ac_count -gt $lt_ac_max; then
+      lt_ac_max=$lt_ac_count
+      lt_cv_path_SED=$lt_ac_sed
+    fi
+  done
+done
 ])
+SED=$lt_cv_path_SED
+AC_SUBST([SED])
+AC_MSG_RESULT([$SED])
+])#AC_PROG_SED
+])#m4_ifndef
+
+# Old name:
+AU_ALIAS([LT_AC_PROG_SED], [AC_PROG_SED])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([LT_AC_PROG_SED], [])
+
+
+# _LT_CHECK_SHELL_FEATURES
+# ------------------------
+# Find out whether the shell is Bourne or XSI compatible,
+# or has some other useful features.
+m4_defun([_LT_CHECK_SHELL_FEATURES],
+[AC_MSG_CHECKING([whether the shell understands some XSI constructs])
+# Try some XSI features
+xsi_shell=no
+( _lt_dummy="a/b/c"
+  test "${_lt_dummy##*/},${_lt_dummy%/*},"${_lt_dummy%"$_lt_dummy"}, \
+      = c,a/b,, \
+    && eval 'test $(( 1 + 1 )) -eq 2 \
+    && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \
+  && xsi_shell=yes
+AC_MSG_RESULT([$xsi_shell])
+_LT_CONFIG_LIBTOOL_INIT([xsi_shell='$xsi_shell'])
+
+AC_MSG_CHECKING([whether the shell understands "+="])
+lt_shell_append=no
+( foo=bar; set foo baz; eval "$[1]+=\$[2]" && test "$foo" = barbaz ) \
+    >/dev/null 2>&1 \
+  && lt_shell_append=yes
+AC_MSG_RESULT([$lt_shell_append])
+_LT_CONFIG_LIBTOOL_INIT([lt_shell_append='$lt_shell_append'])
 
+if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
+  lt_unset=unset
+else
+  lt_unset=false
+fi
+_LT_DECL([], [lt_unset], [0], [whether the shell understands "unset"])dnl
 
-# AC_LIBTOOL_PROG_LD_SHLIBS([TAGNAME])
-# ------------------------------------
-# See if the linker supports building shared libraries.
-AC_DEFUN([AC_LIBTOOL_PROG_LD_SHLIBS],
-[AC_REQUIRE([LT_AC_PROG_SED])dnl
-AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries])
-ifelse([$1],[CXX],[
-  _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
-  case $host_os in
-  aix[[4-9]]*)
-    # If we're using GNU nm, then we don't want the "-C" option.
-    # -C means demangle to AIX nm, but means don't demangle with GNU nm
-    if $NM -V 2>&1 | grep 'GNU' > /dev/null; then
-      _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols'
-    else
-      _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols'
-    fi
-    ;;
-  pw32*)
-    _LT_AC_TAGVAR(export_symbols_cmds, $1)="$ltdll_cmds"
-  ;;
-  cygwin* | mingw*)
-    _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;/^.*[[ ]]__nm__/s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.*[[ ]]//'\'' | sort | uniq > $export_symbols'
-  ;;
-  linux* | k*bsd*-gnu)
-    _LT_AC_TAGVAR(link_all_deplibs, $1)=no
-  ;;
-  *)
-    _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+# test EBCDIC or ASCII
+case `echo X|tr X '\101'` in
+ A) # ASCII based system
+    # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr
+  lt_SP2NL='tr \040 \012'
+  lt_NL2SP='tr \015\012 \040\040'
+  ;;
+ *) # EBCDIC based system
+  lt_SP2NL='tr \100 \n'
+  lt_NL2SP='tr \r\n \100\100'
   ;;
+esac
+_LT_DECL([SP2NL], [lt_SP2NL], [1], [turn spaces into newlines])dnl
+_LT_DECL([NL2SP], [lt_NL2SP], [1], [turn newlines into spaces])dnl
+])# _LT_CHECK_SHELL_FEATURES
+
+
+# _LT_PROG_XSI_SHELLFNS
+# ---------------------
+# Bourne and XSI compatible variants of some useful shell functions.
+m4_defun([_LT_PROG_XSI_SHELLFNS],
+[case $xsi_shell in
+  yes)
+    cat << \_LT_EOF >> "$cfgfile"
+
+# func_dirname file append nondir_replacement
+# Compute the dirname of FILE.  If nonempty, add APPEND to the result,
+# otherwise set result to NONDIR_REPLACEMENT.
+func_dirname ()
+{
+  case ${1} in
+    */*) func_dirname_result="${1%/*}${2}" ;;
+    *  ) func_dirname_result="${3}" ;;
   esac
-  _LT_AC_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*']
-],[
-  runpath_var=
-  _LT_AC_TAGVAR(allow_undefined_flag, $1)=
-  _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=no
-  _LT_AC_TAGVAR(archive_cmds, $1)=
-  _LT_AC_TAGVAR(archive_expsym_cmds, $1)=
-  _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)=
-  _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1)=
-  _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=
-  _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
-  _LT_AC_TAGVAR(thread_safe_flag_spec, $1)=
-  _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=
-  _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
-  _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
-  _LT_AC_TAGVAR(hardcode_direct, $1)=no
-  _LT_AC_TAGVAR(hardcode_minus_L, $1)=no
-  _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
-  _LT_AC_TAGVAR(link_all_deplibs, $1)=unknown
-  _LT_AC_TAGVAR(hardcode_automatic, $1)=no
-  _LT_AC_TAGVAR(module_cmds, $1)=
-  _LT_AC_TAGVAR(module_expsym_cmds, $1)=
-  _LT_AC_TAGVAR(always_export_symbols, $1)=no
-  _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
-  # include_expsyms should be a list of space-separated symbols to be *always*
-  # included in the symbol list
-  _LT_AC_TAGVAR(include_expsyms, $1)=
-  # exclude_expsyms can be an extended regexp of symbols to exclude
-  # it will be wrapped by ` (' and `)$', so one must not match beginning or
-  # end of line.  Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
-  # as well as any symbol that contains `d'.
-  _LT_AC_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*']
-  # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
-  # platforms (ab)use it in PIC code, but their linkers get confused if
-  # the symbol is explicitly referenced.  Since portable code cannot
-  # rely on this symbol name, it's probably fine to never include it in
-  # preloaded symbol tables.
-  # Exclude shared library initialization/finalization symbols.
-dnl Note also adjust exclude_expsyms for C++ above.
-  extract_expsyms_cmds=
-  # Just being paranoid about ensuring that cc_basename is set.
-  _LT_CC_BASENAME([$compiler])
-  case $host_os in
-  cygwin* | mingw* | pw32*)
-    # FIXME: the MSVC++ port hasn't been tested in a loooong time
-    # When not using gcc, we currently assume that we are using
-    # Microsoft Visual C++.
-    if test "$GCC" != yes; then
-      with_gnu_ld=no
-    fi
-    ;;
-  interix*)
-    # we just hope/assume this is gcc and not c89 (= MSVC++)
-    with_gnu_ld=yes
-    ;;
-  openbsd*)
-    with_gnu_ld=no
-    ;;
+}
+
+# func_basename file
+func_basename ()
+{
+  func_basename_result="${1##*/}"
+}
+
+# func_dirname_and_basename file append nondir_replacement
+# perform func_basename and func_dirname in a single function
+# call:
+#   dirname:  Compute the dirname of FILE.  If nonempty,
+#             add APPEND to the result, otherwise set result
+#             to NONDIR_REPLACEMENT.
+#             value returned in "$func_dirname_result"
+#   basename: Compute filename of FILE.
+#             value retuned in "$func_basename_result"
+# Implementation must be kept synchronized with func_dirname
+# and func_basename. For efficiency, we do not delegate to
+# those functions but instead duplicate the functionality here.
+func_dirname_and_basename ()
+{
+  case ${1} in
+    */*) func_dirname_result="${1%/*}${2}" ;;
+    *  ) func_dirname_result="${3}" ;;
   esac
+  func_basename_result="${1##*/}"
+}
 
-  _LT_AC_TAGVAR(ld_shlibs, $1)=yes
-  if test "$with_gnu_ld" = yes; then
-    # If archive_cmds runs LD, not CC, wlarc should be empty
-    wlarc='${wl}'
+# func_stripname prefix suffix name
+# strip PREFIX and SUFFIX off of NAME.
+# PREFIX and SUFFIX must not contain globbing or regex special
+# characters, hashes, percent signs, but SUFFIX may contain a leading
+# dot (in which case that matches only a dot).
+func_stripname ()
+{
+  # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are
+  # positional parameters, so assign one to ordinary parameter first.
+  func_stripname_result=${3}
+  func_stripname_result=${func_stripname_result#"${1}"}
+  func_stripname_result=${func_stripname_result%"${2}"}
+}
 
-    # Set some defaults for GNU ld with shared library support. These
-    # are reset later if shared libraries are not supported. Putting them
-    # here allows them to be overridden if necessary.
-    runpath_var=LD_RUN_PATH
-    _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir'
-    _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
-    # ancient GNU ld didn't support --whole-archive et. al.
-    if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then
-	_LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
-      else
-  	_LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
-    fi
-    supports_anon_versioning=no
-    case `$LD -v 2>/dev/null` in
-      *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.10.*) ;; # catch versions < 2.11
-      *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
-      *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
-      *\ 2.11.*) ;; # other 2.11 versions
-      *) supports_anon_versioning=yes ;;
-    esac
+# func_opt_split
+func_opt_split ()
+{
+  func_opt_split_opt=${1%%=*}
+  func_opt_split_arg=${1#*=}
+}
 
-    # See if GNU ld supports shared libraries.
-    case $host_os in
-    aix[[3-9]]*)
-      # On AIX/PPC, the GNU linker is very broken
-      if test "$host_cpu" != ia64; then
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
-	cat <<EOF 1>&2
+# func_lo2o object
+func_lo2o ()
+{
+  case ${1} in
+    *.lo) func_lo2o_result=${1%.lo}.${objext} ;;
+    *)    func_lo2o_result=${1} ;;
+  esac
+}
 
-*** Warning: the GNU linker, at least up to release 2.9.1, is reported
-*** to be unable to reliably create shared libraries on AIX.
-*** Therefore, libtool is disabling shared libraries support.  If you
-*** really care for shared libraries, you may want to modify your PATH
-*** so that a non-GNU linker is found, and then restart.
+# func_xform libobj-or-source
+func_xform ()
+{
+  func_xform_result=${1%.*}.lo
+}
 
-EOF
-      fi
-      ;;
+# func_arith arithmetic-term...
+func_arith ()
+{
+  func_arith_result=$(( $[*] ))
+}
 
-    amigaos*)
-      _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-      _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-
-      # Samuel A. Falvo II <kc5tja@dolphin.openprojects.net> reports
-      # that the semantics of dynamic libraries on AmigaOS, at least up
-      # to version 4, is to share data among multiple programs linked
-      # with the same dynamic library.  Since this doesn't match the
-      # behavior of shared libraries on other platforms, we can't use
-      # them.
-      _LT_AC_TAGVAR(ld_shlibs, $1)=no
-      ;;
+# func_len string
+# STRING may not start with a hyphen.
+func_len ()
+{
+  func_len_result=${#1}
+}
 
-    beos*)
-      if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-	_LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
-	# Joseph Beckenbach <jrb3@best.com> says some releases of gcc
-	# support --undefined.  This deserves some investigation.  FIXME
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-      else
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
-      fi
-      ;;
+_LT_EOF
+    ;;
+  *) # Bourne compatible functions.
+    cat << \_LT_EOF >> "$cfgfile"
 
-    cygwin* | mingw* | pw32*)
-      # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
-      # as there is no search path for DLLs.
-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-      _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
-      _LT_AC_TAGVAR(always_export_symbols, $1)=no
-      _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
-      _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/'\'' -e '\''/^[[AITW]][[ ]]/s/.*[[ ]]//'\'' | sort | uniq > $export_symbols'
+# func_dirname file append nondir_replacement
+# Compute the dirname of FILE.  If nonempty, add APPEND to the result,
+# otherwise set result to NONDIR_REPLACEMENT.
+func_dirname ()
+{
+  # Extract subdirectory from the argument.
+  func_dirname_result=`$ECHO "X${1}" | $Xsed -e "$dirname"`
+  if test "X$func_dirname_result" = "X${1}"; then
+    func_dirname_result="${3}"
+  else
+    func_dirname_result="$func_dirname_result${2}"
+  fi
+}
 
-      if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
-        _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
-	# If the export-symbols file already is a .def file (1st line
-	# is EXPORTS), use it as is; otherwise, prepend...
-	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
-	  cp $export_symbols $output_objdir/$soname.def;
-	else
-	  echo EXPORTS > $output_objdir/$soname.def;
-	  cat $export_symbols >> $output_objdir/$soname.def;
-	fi~
-	$CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
-      else
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
-      fi
-      ;;
+# func_basename file
+func_basename ()
+{
+  func_basename_result=`$ECHO "X${1}" | $Xsed -e "$basename"`
+}
 
-    interix[[3-9]]*)
-      _LT_AC_TAGVAR(hardcode_direct, $1)=no
-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-      _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
-      # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
-      # Instead, shared libraries are loaded at an image base (0x10000000 by
-      # default) and relocated if they conflict, which is a slow very memory
-      # consuming and fragmenting process.  To avoid this, we pick a random,
-      # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
-      # time.  Moving up from 0x10000000 also allows more sbrk(2) space.
-      _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
-      _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
-      ;;
+dnl func_dirname_and_basename
+dnl A portable version of this function is already defined in general.m4sh
+dnl so there is no need for it here.
+
+# func_stripname prefix suffix name
+# strip PREFIX and SUFFIX off of NAME.
+# PREFIX and SUFFIX must not contain globbing or regex special
+# characters, hashes, percent signs, but SUFFIX may contain a leading
+# dot (in which case that matches only a dot).
+# func_strip_suffix prefix name
+func_stripname ()
+{
+  case ${2} in
+    .*) func_stripname_result=`$ECHO "X${3}" \
+           | $Xsed -e "s%^${1}%%" -e "s%\\\\${2}\$%%"`;;
+    *)  func_stripname_result=`$ECHO "X${3}" \
+           | $Xsed -e "s%^${1}%%" -e "s%${2}\$%%"`;;
+  esac
+}
 
-    gnu* | linux* | k*bsd*-gnu)
-      if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-	tmp_addflag=
-	case $cc_basename,$host_cpu in
-	pgcc*)				# Portland Group C compiler
-	  _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
-	  tmp_addflag=' $pic_flag'
-	  ;;
-	pgf77* | pgf90* | pgf95*)	# Portland Group f77 and f90 compilers
-	  _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
-	  tmp_addflag=' $pic_flag -Mnomain' ;;
-	ecc*,ia64* | icc*,ia64*)		# Intel C compiler on ia64
-	  tmp_addflag=' -i_dynamic' ;;
-	efc*,ia64* | ifort*,ia64*)	# Intel Fortran compiler on ia64
-	  tmp_addflag=' -i_dynamic -nofor_main' ;;
-	ifc* | ifort*)			# Intel Fortran compiler
-	  tmp_addflag=' -nofor_main' ;;
-	esac
-	case `$CC -V 2>&1 | sed 5q` in
-	*Sun\ C*)			# Sun C 5.9
-	  _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
-	  tmp_sharedflag='-G' ;;
-	*Sun\ F*)			# Sun Fortran 8.3
-	  tmp_sharedflag='-G' ;;
-	*)
-	  tmp_sharedflag='-shared' ;;
-	esac
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+# sed scripts:
+my_sed_long_opt='1s/^\(-[[^=]]*\)=.*/\1/;q'
+my_sed_long_arg='1s/^-[[^=]]*=//'
 
-	if test $supports_anon_versioning = yes; then
-	  _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $output_objdir/$libname.ver~
-  cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
-  $echo "local: *; };" >> $output_objdir/$libname.ver~
-	  $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
-	fi
-	_LT_AC_TAGVAR(link_all_deplibs, $1)=no
-      else
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
-      fi
-      ;;
+# func_opt_split
+func_opt_split ()
+{
+  func_opt_split_opt=`$ECHO "X${1}" | $Xsed -e "$my_sed_long_opt"`
+  func_opt_split_arg=`$ECHO "X${1}" | $Xsed -e "$my_sed_long_arg"`
+}
 
-    netbsd*)
-      if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-	_LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
-	wlarc=
-      else
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-      fi
-      ;;
+# func_lo2o object
+func_lo2o ()
+{
+  func_lo2o_result=`$ECHO "X${1}" | $Xsed -e "$lo2o"`
+}
 
-    solaris*)
-      if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
-	cat <<EOF 1>&2
+# func_xform libobj-or-source
+func_xform ()
+{
+  func_xform_result=`$ECHO "X${1}" | $Xsed -e 's/\.[[^.]]*$/.lo/'`
+}
 
-*** Warning: The releases 2.8.* of the GNU linker cannot reliably
-*** create shared libraries on Solaris systems.  Therefore, libtool
-*** is disabling shared libraries support.  We urge you to upgrade GNU
-*** binutils to release 2.9.1 or newer.  Another option is to modify
-*** your PATH or compiler configuration so that the native linker is
-*** used, and then restart.
+# func_arith arithmetic-term...
+func_arith ()
+{
+  func_arith_result=`expr "$[@]"`
+}
 
-EOF
-      elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-      else
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
-      fi
-      ;;
+# func_len string
+# STRING may not start with a hyphen.
+func_len ()
+{
+  func_len_result=`expr "$[1]" : ".*" 2>/dev/null || echo $max_cmd_len`
+}
 
-    sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
-      case `$LD -v 2>&1` in
-        *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.1[[0-5]].*)
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
-	cat <<_LT_EOF 1>&2
+_LT_EOF
+esac
 
-*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not
-*** reliably create shared libraries on SCO systems.  Therefore, libtool
-*** is disabling shared libraries support.  We urge you to upgrade GNU
-*** binutils to release 2.16.91.0.3 or newer.  Another option is to modify
-*** your PATH or compiler configuration so that the native linker is
-*** used, and then restart.
+case $lt_shell_append in
+  yes)
+    cat << \_LT_EOF >> "$cfgfile"
+
+# func_append var value
+# Append VALUE to the end of shell variable VAR.
+func_append ()
+{
+  eval "$[1]+=\$[2]"
+}
+_LT_EOF
+    ;;
+  *)
+    cat << \_LT_EOF >> "$cfgfile"
+
+# func_append var value
+# Append VALUE to the end of shell variable VAR.
+func_append ()
+{
+  eval "$[1]=\$$[1]\$[2]"
+}
 
 _LT_EOF
-	;;
-	*)
-	  if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-	    _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='`test -z "$SCOABSPATH" && echo ${wl}-rpath,$libdir`'
-	    _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib'
-	    _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname,-retain-symbols-file,$export_symbols -o $lib'
-	  else
-	    _LT_AC_TAGVAR(ld_shlibs, $1)=no
-	  fi
-	;;
-      esac
-      ;;
+    ;;
+  esac
+])
 
-    sunos4*)
-      _LT_AC_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-      wlarc=
-      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-      ;;
+# Helper functions for option handling.                    -*- Autoconf -*-
+#
+#   Copyright (C) 2004, 2005, 2007, 2008 Free Software Foundation, Inc.
+#   Written by Gary V. Vaughan, 2004
+#
+# This file is free software; the Free Software Foundation gives
+# unlimited permission to copy and/or distribute it, with or without
+# modifications, as long as this notice is preserved.
 
-    *)
-      if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-      else
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
-      fi
-      ;;
-    esac
+# serial 6 ltoptions.m4
 
-    if test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no; then
-      runpath_var=
-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=
-      _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=
-      _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
-    fi
-  else
-    # PORTME fill in a description of your system's linker (not GNU ld)
-    case $host_os in
-    aix3*)
-      _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
-      _LT_AC_TAGVAR(always_export_symbols, $1)=yes
-      _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
-      # Note: this linker hardcodes the directories in LIBPATH if there
-      # are no directories specified by -L.
-      _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-      if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then
-	# Neither direct hardcoding nor static linking is supported with a
-	# broken collect2.
-	_LT_AC_TAGVAR(hardcode_direct, $1)=unsupported
-      fi
-      ;;
+# This is to help aclocal find these macros, as it can't see m4_define.
+AC_DEFUN([LTOPTIONS_VERSION], [m4_if([1])])
 
-    aix[[4-9]]*)
-      if test "$host_cpu" = ia64; then
-	# On IA64, the linker does run time linking by default, so we don't
-	# have to do anything special.
-	aix_use_runtimelinking=no
-	exp_sym_flag='-Bexport'
-	no_entry_flag=""
-      else
-	# If we're using GNU nm, then we don't want the "-C" option.
-	# -C means demangle to AIX nm, but means don't demangle with GNU nm
-	if $NM -V 2>&1 | grep 'GNU' > /dev/null; then
-	  _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols'
-	else
-	  _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols'
-	fi
-	aix_use_runtimelinking=no
 
-	# Test if we are trying to use run time linking or normal
-	# AIX style linking. If -brtl is somewhere in LDFLAGS, we
-	# need to do runtime linking.
-	case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*)
-	  for ld_flag in $LDFLAGS; do
-  	  if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
-  	    aix_use_runtimelinking=yes
-  	    break
-  	  fi
-	  done
-	  ;;
-	esac
+# _LT_MANGLE_OPTION(MACRO-NAME, OPTION-NAME)
+# ------------------------------------------
+m4_define([_LT_MANGLE_OPTION],
+[[_LT_OPTION_]m4_bpatsubst($1__$2, [[^a-zA-Z0-9_]], [_])])
+
 
-	exp_sym_flag='-bexport'
-	no_entry_flag='-bnoentry'
-      fi
+# _LT_SET_OPTION(MACRO-NAME, OPTION-NAME)
+# ---------------------------------------
+# Set option OPTION-NAME for macro MACRO-NAME, and if there is a
+# matching handler defined, dispatch to it.  Other OPTION-NAMEs are
+# saved as a flag.
+m4_define([_LT_SET_OPTION],
+[m4_define(_LT_MANGLE_OPTION([$1], [$2]))dnl
+m4_ifdef(_LT_MANGLE_DEFUN([$1], [$2]),
+        _LT_MANGLE_DEFUN([$1], [$2]),
+    [m4_warning([Unknown $1 option `$2'])])[]dnl
+])
 
-      # When large executables or shared objects are built, AIX ld can
-      # have problems creating the table of contents.  If linking a library
-      # or program results in "error TOC overflow" add -mminimal-toc to
-      # CXXFLAGS/CFLAGS for g++/gcc.  In the cases where that is not
-      # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
 
-      _LT_AC_TAGVAR(archive_cmds, $1)=''
-      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-      _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':'
-      _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
+# _LT_IF_OPTION(MACRO-NAME, OPTION-NAME, IF-SET, [IF-NOT-SET])
+# ------------------------------------------------------------
+# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise.
+m4_define([_LT_IF_OPTION],
+[m4_ifdef(_LT_MANGLE_OPTION([$1], [$2]), [$3], [$4])])
 
-      if test "$GCC" = yes; then
-	case $host_os in aix4.[[012]]|aix4.[[012]].*)
-	# We only want to do this on AIX 4.2 and lower, the check
-	# below for broken collect2 doesn't work under 4.3+
-	  collect2name=`${CC} -print-prog-name=collect2`
-	  if test -f "$collect2name" && \
-  	   strings "$collect2name" | grep resolve_lib_name >/dev/null
-	  then
-  	  # We have reworked collect2
-  	  :
-	  else
-  	  # We have old collect2
-  	  _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported
-  	  # It fails to find uninstalled libraries when the uninstalled
-  	  # path is not listed in the libpath.  Setting hardcode_minus_L
-  	  # to unsupported forces relinking
-  	  _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-  	  _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-  	  _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
-	  fi
-	  ;;
-	esac
-	shared_flag='-shared'
-	if test "$aix_use_runtimelinking" = yes; then
-	  shared_flag="$shared_flag "'${wl}-G'
-	fi
-      else
-	# not using gcc
-	if test "$host_cpu" = ia64; then
-  	# VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
-  	# chokes on -Wl,-G. The following line is correct:
-	  shared_flag='-G'
-	else
-	  if test "$aix_use_runtimelinking" = yes; then
-	    shared_flag='${wl}-G'
-	  else
-	    shared_flag='${wl}-bM:SRE'
-	  fi
-	fi
-      fi
 
-      # It seems that -bexpall does not export symbols beginning with
-      # underscore (_), so it is better to generate a list of symbols to export.
-      _LT_AC_TAGVAR(always_export_symbols, $1)=yes
-      if test "$aix_use_runtimelinking" = yes; then
-	# Warning - without using the other runtime loading flags (-brtl),
-	# -berok will link without error, but may produce a broken library.
-	_LT_AC_TAGVAR(allow_undefined_flag, $1)='-berok'
-       # Determine the default libpath from the value encoded in an empty executable.
-       _LT_AC_SYS_LIBPATH_AIX
-       _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
-	_LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
-       else
-	if test "$host_cpu" = ia64; then
-	  _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
-	  _LT_AC_TAGVAR(allow_undefined_flag, $1)="-z nodefs"
-	  _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
-	else
-	 # Determine the default libpath from the value encoded in an empty executable.
-	 _LT_AC_SYS_LIBPATH_AIX
-	 _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
-	  # Warning - without using the other run time loading flags,
-	  # -berok will link without error, but may produce a broken library.
-	  _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
-	  _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
-	  # Exported symbols can be pulled into shared objects from archives
-	  _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
-	  _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes
-	  # This is similar to how AIX traditionally builds its shared libraries.
-	  _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
-	fi
-      fi
-      ;;
+# _LT_UNLESS_OPTIONS(MACRO-NAME, OPTION-LIST, IF-NOT-SET)
+# -------------------------------------------------------
+# Execute IF-NOT-SET unless all options in OPTION-LIST for MACRO-NAME
+# are set.
+m4_define([_LT_UNLESS_OPTIONS],
+[m4_foreach([_LT_Option], m4_split(m4_normalize([$2])),
+	    [m4_ifdef(_LT_MANGLE_OPTION([$1], _LT_Option),
+		      [m4_define([$0_found])])])[]dnl
+m4_ifdef([$0_found], [m4_undefine([$0_found])], [$3
+])[]dnl
+])
 
-    amigaos*)
-      _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-      _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-      # see comment about different semantics on the GNU ld section
-      _LT_AC_TAGVAR(ld_shlibs, $1)=no
-      ;;
 
-    bsdi[[45]]*)
-      _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=-rdynamic
-      ;;
+# _LT_SET_OPTIONS(MACRO-NAME, OPTION-LIST)
+# ----------------------------------------
+# OPTION-LIST is a space-separated list of Libtool options associated
+# with MACRO-NAME.  If any OPTION has a matching handler declared with
+# LT_OPTION_DEFINE, dispatch to that macro; otherwise complain about
+# the unknown option and exit.
+m4_defun([_LT_SET_OPTIONS],
+[# Set options
+m4_foreach([_LT_Option], m4_split(m4_normalize([$2])),
+    [_LT_SET_OPTION([$1], _LT_Option)])
+
+m4_if([$1],[LT_INIT],[
+  dnl
+  dnl Simply set some default values (i.e off) if boolean options were not
+  dnl specified:
+  _LT_UNLESS_OPTIONS([LT_INIT], [dlopen], [enable_dlopen=no
+  ])
+  _LT_UNLESS_OPTIONS([LT_INIT], [win32-dll], [enable_win32_dll=no
+  ])
+  dnl
+  dnl If no reference was made to various pairs of opposing options, then
+  dnl we run the default mode handler for the pair.  For example, if neither
+  dnl `shared' nor `disable-shared' was passed, we enable building of shared
+  dnl archives by default:
+  _LT_UNLESS_OPTIONS([LT_INIT], [shared disable-shared], [_LT_ENABLE_SHARED])
+  _LT_UNLESS_OPTIONS([LT_INIT], [static disable-static], [_LT_ENABLE_STATIC])
+  _LT_UNLESS_OPTIONS([LT_INIT], [pic-only no-pic], [_LT_WITH_PIC])
+  _LT_UNLESS_OPTIONS([LT_INIT], [fast-install disable-fast-install],
+  		   [_LT_ENABLE_FAST_INSTALL])
+  ])
+])# _LT_SET_OPTIONS
 
-    cygwin* | mingw* | pw32*)
-      # When not using gcc, we currently assume that we are using
-      # Microsoft Visual C++.
-      # hardcode_libdir_flag_spec is actually meaningless, as there is
-      # no search path for DLLs.
-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=' '
-      _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
-      # Tell ltmain to make .lib files, not .a files.
-      libext=lib
-      # Tell ltmain to make .dll files, not .so files.
-      shrext_cmds=".dll"
-      # FIXME: Setting linknames here is a bad hack.
-      _LT_AC_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames='
-      # The linker will automatically build a .lib file if we build a DLL.
-      _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)='true'
-      # FIXME: Should let the user specify the lib program.
-      _LT_AC_TAGVAR(old_archive_cmds, $1)='lib -OUT:$oldlib$oldobjs$old_deplibs'
-      _LT_AC_TAGVAR(fix_srcfile_path, $1)='`cygpath -w "$srcfile"`'
-      _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
-      ;;
 
-    darwin* | rhapsody*)
-      case $host_os in
-        rhapsody* | darwin1.[[012]])
-         _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-undefined ${wl}suppress'
-         ;;
-       *) # Darwin 1.3 on
-         if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then
-           _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
-         else
-           case ${MACOSX_DEPLOYMENT_TARGET} in
-             10.[[012]])
-               _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
-               ;;
-             10.*)
-               _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-undefined ${wl}dynamic_lookup'
-               ;;
-           esac
-         fi
-         ;;
-      esac
-      _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-      _LT_AC_TAGVAR(hardcode_direct, $1)=no
-      _LT_AC_TAGVAR(hardcode_automatic, $1)=yes
-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
-      _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=''
-      _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
-    if test "$GCC" = yes ; then
-    	output_verbose_link_cmd='echo'
-        _LT_AC_TAGVAR(archive_cmds, $1)="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}"
-        _LT_AC_TAGVAR(module_cmds, $1)="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}"
-        _LT_AC_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}"
-        _LT_AC_TAGVAR(module_expsym_cmds, $1)="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}"
-    else
-      case $cc_basename in
-        xlc*)
-         output_verbose_link_cmd='echo'
-         _LT_AC_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $xlcverstring'
-         _LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
-          # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
-         _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $xlcverstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-          _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag  -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-          ;;
-       *)
-         _LT_AC_TAGVAR(ld_shlibs, $1)=no
-          ;;
-      esac
-    fi
-      ;;
 
-    dgux*)
-      _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-      ;;
+# _LT_MANGLE_DEFUN(MACRO-NAME, OPTION-NAME)
+# -----------------------------------------
+m4_define([_LT_MANGLE_DEFUN],
+[[_LT_OPTION_DEFUN_]m4_bpatsubst(m4_toupper([$1__$2]), [[^A-Z0-9_]], [_])])
 
-    freebsd1*)
-      _LT_AC_TAGVAR(ld_shlibs, $1)=no
-      ;;
 
-    # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
-    # support.  Future versions do this automatically, but an explicit c++rt0.o
-    # does not break anything, and helps significantly (at the cost of a little
-    # extra space).
-    freebsd2.2*)
-      _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-      ;;
+# LT_OPTION_DEFINE(MACRO-NAME, OPTION-NAME, CODE)
+# -----------------------------------------------
+m4_define([LT_OPTION_DEFINE],
+[m4_define(_LT_MANGLE_DEFUN([$1], [$2]), [$3])[]dnl
+])# LT_OPTION_DEFINE
 
-    # Unfortunately, older versions of FreeBSD 2 do not have this feature.
-    freebsd2*)
-      _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-      _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-      ;;
 
-    # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
-    freebsd* | dragonfly*)
-      _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-      ;;
+# dlopen
+# ------
+LT_OPTION_DEFINE([LT_INIT], [dlopen], [enable_dlopen=yes
+])
 
-    hpux9*)
-      if test "$GCC" = yes; then
-	_LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
-      else
-	_LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
-      fi
-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
-      _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
+AU_DEFUN([AC_LIBTOOL_DLOPEN],
+[_LT_SET_OPTION([LT_INIT], [dlopen])
+AC_DIAGNOSE([obsolete],
+[$0: Remove this warning and the call to _LT_SET_OPTION when you
+put the `dlopen' option into LT_INIT's first parameter.])
+])
 
-      # hardcode_minus_L: Not really in the search PATH,
-      # but as the default location of the library.
-      _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-      _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
-      ;;
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LIBTOOL_DLOPEN], [])
 
-    hpux10*)
-      if test "$GCC" = yes -a "$with_gnu_ld" = no; then
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
-      else
-	_LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
-      fi
-      if test "$with_gnu_ld" = no; then
-	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
-	_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
 
-	_LT_AC_TAGVAR(hardcode_direct, $1)=yes
-	_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+# win32-dll
+# ---------
+# Declare package support for building win32 dll's.
+LT_OPTION_DEFINE([LT_INIT], [win32-dll],
+[enable_win32_dll=yes
 
-	# hardcode_minus_L: Not really in the search PATH,
-	# but as the default location of the library.
-	_LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-      fi
-      ;;
+case $host in
+*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-cegcc*)
+  AC_CHECK_TOOL(AS, as, false)
+  AC_CHECK_TOOL(DLLTOOL, dlltool, false)
+  AC_CHECK_TOOL(OBJDUMP, objdump, false)
+  ;;
+esac
 
-    hpux11*)
-      if test "$GCC" = yes -a "$with_gnu_ld" = no; then
-	case $host_cpu in
-	hppa*64*)
-	  _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-	  ;;
-	ia64*)
-	  _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
-	  ;;
-	*)
-	  _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
-	  ;;
-	esac
-      else
-	case $host_cpu in
-	hppa*64*)
-	  _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-	  ;;
-	ia64*)
-	  _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
-	  ;;
-	*)
-	  _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
-	  ;;
-	esac
-      fi
-      if test "$with_gnu_ld" = no; then
-	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
-	_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
+test -z "$AS" && AS=as
+_LT_DECL([], [AS],      [0], [Assembler program])dnl
 
-	case $host_cpu in
-	hppa*64*|ia64*)
-	  _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='+b $libdir'
-	  _LT_AC_TAGVAR(hardcode_direct, $1)=no
-	  _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-	  ;;
-	*)
-	  _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-	  _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+test -z "$DLLTOOL" && DLLTOOL=dlltool
+_LT_DECL([], [DLLTOOL], [0], [DLL creation program])dnl
 
-	  # hardcode_minus_L: Not really in the search PATH,
-	  # but as the default location of the library.
-	  _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-	  ;;
-	esac
-      fi
-      ;;
+test -z "$OBJDUMP" && OBJDUMP=objdump
+_LT_DECL([], [OBJDUMP], [0], [Object dumper program])dnl
+])# win32-dll
 
-    irix5* | irix6* | nonstopux*)
-      if test "$GCC" = yes; then
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-      else
-	_LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-	_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='-rpath $libdir'
-      fi
-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-      _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-      _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
-      ;;
+AU_DEFUN([AC_LIBTOOL_WIN32_DLL],
+[AC_REQUIRE([AC_CANONICAL_HOST])dnl
+_LT_SET_OPTION([LT_INIT], [win32-dll])
+AC_DIAGNOSE([obsolete],
+[$0: Remove this warning and the call to _LT_SET_OPTION when you
+put the `win32-dll' option into LT_INIT's first parameter.])
+])
 
-    netbsd*)
-      if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
-	_LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'  # a.out
-      else
-	_LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared -o $lib $libobjs $deplibs $linker_flags'      # ELF
-      fi
-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-      ;;
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LIBTOOL_WIN32_DLL], [])
 
-    newsos6)
-      _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-      _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-      ;;
 
-    openbsd*)
-      if test -f /usr/libexec/ld.so; then
-	_LT_AC_TAGVAR(hardcode_direct, $1)=yes
-	_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-	if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-	  _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
-	  _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
-	  _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-	  _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
-	else
-	  case $host_os in
-	   openbsd[[01]].* | openbsd2.[[0-7]] | openbsd2.[[0-7]].*)
-	     _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-	     _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-	     ;;
-	   *)
-	     _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
-	     _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-	     ;;
-	  esac
-        fi
-      else
-	_LT_AC_TAGVAR(ld_shlibs, $1)=no
-      fi
+# _LT_ENABLE_SHARED([DEFAULT])
+# ----------------------------
+# implement the --enable-shared flag, and supports the `shared' and
+# `disable-shared' LT_INIT options.
+# DEFAULT is either `yes' or `no'.  If omitted, it defaults to `yes'.
+m4_define([_LT_ENABLE_SHARED],
+[m4_define([_LT_ENABLE_SHARED_DEFAULT], [m4_if($1, no, no, yes)])dnl
+AC_ARG_ENABLE([shared],
+    [AS_HELP_STRING([--enable-shared@<:@=PKGS@:>@],
+	[build shared libraries @<:@default=]_LT_ENABLE_SHARED_DEFAULT[@:>@])],
+    [p=${PACKAGE-default}
+    case $enableval in
+    yes) enable_shared=yes ;;
+    no) enable_shared=no ;;
+    *)
+      enable_shared=no
+      # Look at the argument we got.  We use all the common list separators.
+      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+      for pkg in $enableval; do
+	IFS="$lt_save_ifs"
+	if test "X$pkg" = "X$p"; then
+	  enable_shared=yes
+	fi
+      done
+      IFS="$lt_save_ifs"
       ;;
+    esac],
+    [enable_shared=]_LT_ENABLE_SHARED_DEFAULT)
 
-    os2*)
-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-      _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-      _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
-      _LT_AC_TAGVAR(archive_cmds, $1)='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
-      _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
-      ;;
+    _LT_DECL([build_libtool_libs], [enable_shared], [0],
+	[Whether or not to build shared libraries])
+])# _LT_ENABLE_SHARED
 
-    osf3*)
-      if test "$GCC" = yes; then
-	_LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-      else
-	_LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
-	_LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-      fi
-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-      _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-      ;;
+LT_OPTION_DEFINE([LT_INIT], [shared], [_LT_ENABLE_SHARED([yes])])
+LT_OPTION_DEFINE([LT_INIT], [disable-shared], [_LT_ENABLE_SHARED([no])])
 
-    osf4* | osf5*)	# as osf3* with the addition of -msym flag
-      if test "$GCC" = yes; then
-	_LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-      else
-	_LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
-	_LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
-	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~
-	$LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~$rm $lib.exp'
+# Old names:
+AC_DEFUN([AC_ENABLE_SHARED],
+[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[shared])
+])
 
-	# Both c and cxx compiler support -rpath directly
-	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
-      fi
-      _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-      ;;
+AC_DEFUN([AC_DISABLE_SHARED],
+[_LT_SET_OPTION([LT_INIT], [disable-shared])
+])
 
-    solaris*)
-      _LT_AC_TAGVAR(no_undefined_flag, $1)=' -z text'
-      if test "$GCC" = yes; then
-	wlarc='${wl}'
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-	  $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp'
-      else
-	wlarc=''
-	_LT_AC_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
-	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
-  	$LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
-      fi
-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-      case $host_os in
-      solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
-      *)
-	# The compiler driver will combine and reorder linker options,
-	# but understands `-z linker_flag'.  GCC discards it without `$wl',
-	# but is careful enough not to reorder.
- 	# Supported since Solaris 2.6 (maybe 2.5.1?)
-	if test "$GCC" = yes; then
-	  _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
-	else
-	  _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract'
+AU_DEFUN([AM_ENABLE_SHARED], [AC_ENABLE_SHARED($@)])
+AU_DEFUN([AM_DISABLE_SHARED], [AC_DISABLE_SHARED($@)])
+
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AM_ENABLE_SHARED], [])
+dnl AC_DEFUN([AM_DISABLE_SHARED], [])
+
+
+
+# _LT_ENABLE_STATIC([DEFAULT])
+# ----------------------------
+# implement the --enable-static flag, and support the `static' and
+# `disable-static' LT_INIT options.
+# DEFAULT is either `yes' or `no'.  If omitted, it defaults to `yes'.
+m4_define([_LT_ENABLE_STATIC],
+[m4_define([_LT_ENABLE_STATIC_DEFAULT], [m4_if($1, no, no, yes)])dnl
+AC_ARG_ENABLE([static],
+    [AS_HELP_STRING([--enable-static@<:@=PKGS@:>@],
+	[build static libraries @<:@default=]_LT_ENABLE_STATIC_DEFAULT[@:>@])],
+    [p=${PACKAGE-default}
+    case $enableval in
+    yes) enable_static=yes ;;
+    no) enable_static=no ;;
+    *)
+     enable_static=no
+      # Look at the argument we got.  We use all the common list separators.
+      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+      for pkg in $enableval; do
+	IFS="$lt_save_ifs"
+	if test "X$pkg" = "X$p"; then
+	  enable_static=yes
 	fi
-	;;
-      esac
-      _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
-      ;;
-
-    sunos4*)
-      if test "x$host_vendor" = xsequent; then
-	# Use $CC to link under sequent, because it throws in some extra .o
-	# files that make .init and .fini sections work.
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
-      else
-	_LT_AC_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
-      fi
-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-      _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+      done
+      IFS="$lt_save_ifs"
       ;;
+    esac],
+    [enable_static=]_LT_ENABLE_STATIC_DEFAULT)
 
-    sysv4)
-      case $host_vendor in
-	sni)
-	  _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-	  _LT_AC_TAGVAR(hardcode_direct, $1)=yes # is this really true???
-	;;
-	siemens)
-	  ## LD is ld it makes a PLAMLIB
-	  ## CC just makes a GrossModule.
-	  _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -o $lib $libobjs $deplibs $linker_flags'
-	  _LT_AC_TAGVAR(reload_cmds, $1)='$CC -r -o $output$reload_objs'
-	  _LT_AC_TAGVAR(hardcode_direct, $1)=no
-        ;;
-	motorola)
-	  _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-	  _LT_AC_TAGVAR(hardcode_direct, $1)=no #Motorola manual says yes, but my tests say they lie
-	;;
-      esac
-      runpath_var='LD_RUN_PATH'
-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-      ;;
+    _LT_DECL([build_old_libs], [enable_static], [0],
+	[Whether or not to build static libraries])
+])# _LT_ENABLE_STATIC
 
-    sysv4.3*)
-      _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-      _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='-Bexport'
-      ;;
+LT_OPTION_DEFINE([LT_INIT], [static], [_LT_ENABLE_STATIC([yes])])
+LT_OPTION_DEFINE([LT_INIT], [disable-static], [_LT_ENABLE_STATIC([no])])
 
-    sysv4*MP*)
-      if test -d /usr/nec; then
-	_LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-	_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-	runpath_var=LD_RUN_PATH
-	hardcode_runpath_var=yes
-	_LT_AC_TAGVAR(ld_shlibs, $1)=yes
-      fi
-      ;;
+# Old names:
+AC_DEFUN([AC_ENABLE_STATIC],
+[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[static])
+])
 
-    sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*)
-      _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
-      _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-      runpath_var='LD_RUN_PATH'
+AC_DEFUN([AC_DISABLE_STATIC],
+[_LT_SET_OPTION([LT_INIT], [disable-static])
+])
 
-      if test "$GCC" = yes; then
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-      else
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-      fi
-      ;;
+AU_DEFUN([AM_ENABLE_STATIC], [AC_ENABLE_STATIC($@)])
+AU_DEFUN([AM_DISABLE_STATIC], [AC_DISABLE_STATIC($@)])
 
-    sysv5* | sco3.2v5* | sco5v6*)
-      # Note: We can NOT use -z defs as we might desire, because we do not
-      # link with -lc, and that would cause any symbols used from libc to
-      # always be unresolved, which means just about no library would
-      # ever link correctly.  If we're not using GNU ld we use -z text
-      # though, which does catch some bad symbols but isn't as heavy-handed
-      # as -z defs.
-      _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
-      _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs'
-      _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`'
-      _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':'
-      _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
-      _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport'
-      runpath_var='LD_RUN_PATH'
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AM_ENABLE_STATIC], [])
+dnl AC_DEFUN([AM_DISABLE_STATIC], [])
 
-      if test "$GCC" = yes; then
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
-	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
-      else
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
-	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
-      fi
-      ;;
 
-    uts4*)
-      _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-      ;;
 
+# _LT_ENABLE_FAST_INSTALL([DEFAULT])
+# ----------------------------------
+# implement the --enable-fast-install flag, and support the `fast-install'
+# and `disable-fast-install' LT_INIT options.
+# DEFAULT is either `yes' or `no'.  If omitted, it defaults to `yes'.
+m4_define([_LT_ENABLE_FAST_INSTALL],
+[m4_define([_LT_ENABLE_FAST_INSTALL_DEFAULT], [m4_if($1, no, no, yes)])dnl
+AC_ARG_ENABLE([fast-install],
+    [AS_HELP_STRING([--enable-fast-install@<:@=PKGS@:>@],
+    [optimize for fast installation @<:@default=]_LT_ENABLE_FAST_INSTALL_DEFAULT[@:>@])],
+    [p=${PACKAGE-default}
+    case $enableval in
+    yes) enable_fast_install=yes ;;
+    no) enable_fast_install=no ;;
     *)
-      _LT_AC_TAGVAR(ld_shlibs, $1)=no
+      enable_fast_install=no
+      # Look at the argument we got.  We use all the common list separators.
+      lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+      for pkg in $enableval; do
+	IFS="$lt_save_ifs"
+	if test "X$pkg" = "X$p"; then
+	  enable_fast_install=yes
+	fi
+      done
+      IFS="$lt_save_ifs"
       ;;
-    esac
-  fi
+    esac],
+    [enable_fast_install=]_LT_ENABLE_FAST_INSTALL_DEFAULT)
+
+_LT_DECL([fast_install], [enable_fast_install], [0],
+	 [Whether or not to optimize for fast installation])dnl
+])# _LT_ENABLE_FAST_INSTALL
+
+LT_OPTION_DEFINE([LT_INIT], [fast-install], [_LT_ENABLE_FAST_INSTALL([yes])])
+LT_OPTION_DEFINE([LT_INIT], [disable-fast-install], [_LT_ENABLE_FAST_INSTALL([no])])
+
+# Old names:
+AU_DEFUN([AC_ENABLE_FAST_INSTALL],
+[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[fast-install])
+AC_DIAGNOSE([obsolete],
+[$0: Remove this warning and the call to _LT_SET_OPTION when you put
+the `fast-install' option into LT_INIT's first parameter.])
 ])
-AC_MSG_RESULT([$_LT_AC_TAGVAR(ld_shlibs, $1)])
-test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no
 
+AU_DEFUN([AC_DISABLE_FAST_INSTALL],
+[_LT_SET_OPTION([LT_INIT], [disable-fast-install])
+AC_DIAGNOSE([obsolete],
+[$0: Remove this warning and the call to _LT_SET_OPTION when you put
+the `disable-fast-install' option into LT_INIT's first parameter.])
+])
+
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_ENABLE_FAST_INSTALL], [])
+dnl AC_DEFUN([AM_DISABLE_FAST_INSTALL], [])
+
+
+# _LT_WITH_PIC([MODE])
+# --------------------
+# implement the --with-pic flag, and support the `pic-only' and `no-pic'
+# LT_INIT options.
+# MODE is either `yes' or `no'.  If omitted, it defaults to `both'.
+m4_define([_LT_WITH_PIC],
+[AC_ARG_WITH([pic],
+    [AS_HELP_STRING([--with-pic],
+	[try to use only PIC/non-PIC objects @<:@default=use both@:>@])],
+    [pic_mode="$withval"],
+    [pic_mode=default])
+
+test -z "$pic_mode" && pic_mode=m4_default([$1], [default])
+
+_LT_DECL([], [pic_mode], [0], [What type of objects to build])dnl
+])# _LT_WITH_PIC
+
+LT_OPTION_DEFINE([LT_INIT], [pic-only], [_LT_WITH_PIC([yes])])
+LT_OPTION_DEFINE([LT_INIT], [no-pic], [_LT_WITH_PIC([no])])
+
+# Old name:
+AU_DEFUN([AC_LIBTOOL_PICMODE],
+[_LT_SET_OPTION([LT_INIT], [pic-only])
+AC_DIAGNOSE([obsolete],
+[$0: Remove this warning and the call to _LT_SET_OPTION when you
+put the `pic-only' option into LT_INIT's first parameter.])
+])
+
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LIBTOOL_PICMODE], [])
+
+
+m4_define([_LTDL_MODE], [])
+LT_OPTION_DEFINE([LTDL_INIT], [nonrecursive],
+		 [m4_define([_LTDL_MODE], [nonrecursive])])
+LT_OPTION_DEFINE([LTDL_INIT], [recursive],
+		 [m4_define([_LTDL_MODE], [recursive])])
+LT_OPTION_DEFINE([LTDL_INIT], [subproject],
+		 [m4_define([_LTDL_MODE], [subproject])])
+
+m4_define([_LTDL_TYPE], [])
+LT_OPTION_DEFINE([LTDL_INIT], [installable],
+		 [m4_define([_LTDL_TYPE], [installable])])
+LT_OPTION_DEFINE([LTDL_INIT], [convenience],
+		 [m4_define([_LTDL_TYPE], [convenience])])
+
+# ltsugar.m4 -- libtool m4 base layer.                         -*-Autoconf-*-
 #
-# Do we need to explicitly link libc?
+# Copyright (C) 2004, 2005, 2007, 2008 Free Software Foundation, Inc.
+# Written by Gary V. Vaughan, 2004
 #
-case "x$_LT_AC_TAGVAR(archive_cmds_need_lc, $1)" in
-x|xyes)
-  # Assume -lc should be added
-  _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes
+# This file is free software; the Free Software Foundation gives
+# unlimited permission to copy and/or distribute it, with or without
+# modifications, as long as this notice is preserved.
 
-  if test "$enable_shared" = yes && test "$GCC" = yes; then
-    case $_LT_AC_TAGVAR(archive_cmds, $1) in
-    *'~'*)
-      # FIXME: we may have to deal with multi-command sequences.
-      ;;
-    '$CC '*)
-      # Test whether the compiler implicitly links with -lc since on some
-      # systems, -lgcc has to come before -lc. If gcc already passes -lc
-      # to ld, don't add -lc before -lgcc.
-      AC_MSG_CHECKING([whether -lc should be explicitly linked in])
-      $rm conftest*
-      echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+# serial 6 ltsugar.m4
 
-      if AC_TRY_EVAL(ac_compile) 2>conftest.err; then
-        soname=conftest
-        lib=conftest
-        libobjs=conftest.$ac_objext
-        deplibs=
-        wl=$_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)
-	pic_flag=$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)
-        compiler_flags=-v
-        linker_flags=-v
-        verstring=
-        output_objdir=.
-        libname=conftest
-        lt_save_allow_undefined_flag=$_LT_AC_TAGVAR(allow_undefined_flag, $1)
-        _LT_AC_TAGVAR(allow_undefined_flag, $1)=
-        if AC_TRY_EVAL(_LT_AC_TAGVAR(archive_cmds, $1) 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1)
-        then
-	  _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
-        else
-	  _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes
-        fi
-        _LT_AC_TAGVAR(allow_undefined_flag, $1)=$lt_save_allow_undefined_flag
-      else
-        cat conftest.err 1>&5
-      fi
-      $rm conftest*
-      AC_MSG_RESULT([$_LT_AC_TAGVAR(archive_cmds_need_lc, $1)])
-      ;;
-    esac
-  fi
-  ;;
-esac
-])# AC_LIBTOOL_PROG_LD_SHLIBS
+# This is to help aclocal find these macros, as it can't see m4_define.
+AC_DEFUN([LTSUGAR_VERSION], [m4_if([0.1])])
 
 
-# _LT_AC_FILE_LTDLL_C
-# -------------------
-# Be careful that the start marker always follows a newline.
-AC_DEFUN([_LT_AC_FILE_LTDLL_C], [
-# /* ltdll.c starts here */
-# #define WIN32_LEAN_AND_MEAN
-# #include <windows.h>
-# #undef WIN32_LEAN_AND_MEAN
-# #include <stdio.h>
-#
-# #ifndef __CYGWIN__
-# #  ifdef __CYGWIN32__
-# #    define __CYGWIN__ __CYGWIN32__
-# #  endif
-# #endif
-#
-# #ifdef __cplusplus
-# extern "C" {
-# #endif
-# BOOL APIENTRY DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved);
-# #ifdef __cplusplus
-# }
-# #endif
-#
-# #ifdef __CYGWIN__
-# #include <cygwin/cygwin_dll.h>
-# DECLARE_CYGWIN_DLL( DllMain );
-# #endif
-# HINSTANCE __hDllInstance_base;
-#
-# BOOL APIENTRY
-# DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved)
-# {
-#   __hDllInstance_base = hInst;
-#   return TRUE;
-# }
-# /* ltdll.c ends here */
-])# _LT_AC_FILE_LTDLL_C
+# lt_join(SEP, ARG1, [ARG2...])
+# -----------------------------
+# Produce ARG1SEPARG2...SEPARGn, omitting [] arguments and their
+# associated separator.
+# Needed until we can rely on m4_join from Autoconf 2.62, since all earlier
+# versions in m4sugar had bugs.
+m4_define([lt_join],
+[m4_if([$#], [1], [],
+       [$#], [2], [[$2]],
+       [m4_if([$2], [], [], [[$2]_])$0([$1], m4_shift(m4_shift($@)))])])
+m4_define([_lt_join],
+[m4_if([$#$2], [2], [],
+       [m4_if([$2], [], [], [[$1$2]])$0([$1], m4_shift(m4_shift($@)))])])
 
 
-# _LT_AC_TAGVAR(VARNAME, [TAGNAME])
-# ---------------------------------
-AC_DEFUN([_LT_AC_TAGVAR], [ifelse([$2], [], [$1], [$1_$2])])
+# lt_car(LIST)
+# lt_cdr(LIST)
+# ------------
+# Manipulate m4 lists.
+# These macros are necessary as long as will still need to support
+# Autoconf-2.59 which quotes differently.
+m4_define([lt_car], [[$1]])
+m4_define([lt_cdr],
+[m4_if([$#], 0, [m4_fatal([$0: cannot be called without arguments])],
+       [$#], 1, [],
+       [m4_dquote(m4_shift($@))])])
+m4_define([lt_unquote], $1)
+
+
+# lt_append(MACRO-NAME, STRING, [SEPARATOR])
+# ------------------------------------------
+# Redefine MACRO-NAME to hold its former content plus `SEPARATOR'`STRING'.
+# Note that neither SEPARATOR nor STRING are expanded; they are appended
+# to MACRO-NAME as is (leaving the expansion for when MACRO-NAME is invoked).
+# No SEPARATOR is output if MACRO-NAME was previously undefined (different
+# than defined and empty).
+#
+# This macro is needed until we can rely on Autoconf 2.62, since earlier
+# versions of m4sugar mistakenly expanded SEPARATOR but not STRING.
+m4_define([lt_append],
+[m4_define([$1],
+	   m4_ifdef([$1], [m4_defn([$1])[$3]])[$2])])
 
 
-# old names
-AC_DEFUN([AM_PROG_LIBTOOL],   [AC_PROG_LIBTOOL])
-AC_DEFUN([AM_ENABLE_SHARED],  [AC_ENABLE_SHARED($@)])
-AC_DEFUN([AM_ENABLE_STATIC],  [AC_ENABLE_STATIC($@)])
-AC_DEFUN([AM_DISABLE_SHARED], [AC_DISABLE_SHARED($@)])
-AC_DEFUN([AM_DISABLE_STATIC], [AC_DISABLE_STATIC($@)])
-AC_DEFUN([AM_PROG_LD],        [AC_PROG_LD])
-AC_DEFUN([AM_PROG_NM],        [AC_PROG_NM])
 
-# This is just to silence aclocal about the macro not being used
-ifelse([AC_DISABLE_FAST_INSTALL])
+# lt_combine(SEP, PREFIX-LIST, INFIX, SUFFIX1, [SUFFIX2...])
+# ----------------------------------------------------------
+# Produce a SEP delimited list of all paired combinations of elements of
+# PREFIX-LIST with SUFFIX1 through SUFFIXn.  Each element of the list
+# has the form PREFIXmINFIXSUFFIXn.
+# Needed until we can rely on m4_combine added in Autoconf 2.62.
+m4_define([lt_combine],
+[m4_if(m4_eval([$# > 3]), [1],
+       [m4_pushdef([_Lt_sep], [m4_define([_Lt_sep], m4_defn([lt_car]))])]]dnl
+[[m4_foreach([_Lt_prefix], [$2],
+	     [m4_foreach([_Lt_suffix],
+		]m4_dquote(m4_dquote(m4_shift(m4_shift(m4_shift($@)))))[,
+	[_Lt_sep([$1])[]m4_defn([_Lt_prefix])[$3]m4_defn([_Lt_suffix])])])])])
+
+
+# lt_if_append_uniq(MACRO-NAME, VARNAME, [SEPARATOR], [UNIQ], [NOT-UNIQ])
+# -----------------------------------------------------------------------
+# Iff MACRO-NAME does not yet contain VARNAME, then append it (delimited
+# by SEPARATOR if supplied) and expand UNIQ, else NOT-UNIQ.
+m4_define([lt_if_append_uniq],
+[m4_ifdef([$1],
+	  [m4_if(m4_index([$3]m4_defn([$1])[$3], [$3$2$3]), [-1],
+		 [lt_append([$1], [$2], [$3])$4],
+		 [$5])],
+	  [lt_append([$1], [$2], [$3])$4])])
 
-AC_DEFUN([LT_AC_PROG_GCJ],
-[AC_CHECK_TOOL(GCJ, gcj, no)
-  test "x${GCJFLAGS+set}" = xset || GCJFLAGS="-g -O2"
-  AC_SUBST(GCJFLAGS)
-])
 
-AC_DEFUN([LT_AC_PROG_RC],
-[AC_CHECK_TOOL(RC, windres, no)
+# lt_dict_add(DICT, KEY, VALUE)
+# -----------------------------
+m4_define([lt_dict_add],
+[m4_define([$1($2)], [$3])])
+
+
+# lt_dict_add_subkey(DICT, KEY, SUBKEY, VALUE)
+# --------------------------------------------
+m4_define([lt_dict_add_subkey],
+[m4_define([$1($2:$3)], [$4])])
+
+
+# lt_dict_fetch(DICT, KEY, [SUBKEY])
+# ----------------------------------
+m4_define([lt_dict_fetch],
+[m4_ifval([$3],
+	m4_ifdef([$1($2:$3)], [m4_defn([$1($2:$3)])]),
+    m4_ifdef([$1($2)], [m4_defn([$1($2)])]))])
+
+
+# lt_if_dict_fetch(DICT, KEY, [SUBKEY], VALUE, IF-TRUE, [IF-FALSE])
+# -----------------------------------------------------------------
+m4_define([lt_if_dict_fetch],
+[m4_if(lt_dict_fetch([$1], [$2], [$3]), [$4],
+	[$5],
+    [$6])])
+
+
+# lt_dict_filter(DICT, [SUBKEY], VALUE, [SEPARATOR], KEY, [...])
+# --------------------------------------------------------------
+m4_define([lt_dict_filter],
+[m4_if([$5], [], [],
+  [lt_join(m4_quote(m4_default([$4], [[, ]])),
+           lt_unquote(m4_split(m4_normalize(m4_foreach(_Lt_key, lt_car([m4_shiftn(4, $@)]),
+		      [lt_if_dict_fetch([$1], _Lt_key, [$2], [$3], [_Lt_key ])])))))])[]dnl
 ])
 
+# ltversion.m4 -- version numbers			-*- Autoconf -*-
+#
+#   Copyright (C) 2004 Free Software Foundation, Inc.
+#   Written by Scott James Remnant, 2004
+#
+# This file is free software; the Free Software Foundation gives
+# unlimited permission to copy and/or distribute it, with or without
+# modifications, as long as this notice is preserved.
 
-# Cheap backport of AS_EXECUTABLE_P and required macros
-# from Autoconf 2.59; we should not use $as_executable_p directly.
+# Generated from ltversion.in.
 
-# _AS_TEST_PREPARE
-# ----------------
-m4_ifndef([_AS_TEST_PREPARE],
-[m4_defun([_AS_TEST_PREPARE],
-[if test -x / >/dev/null 2>&1; then
-  as_executable_p='test -x'
-else
-  as_executable_p='test -f'
-fi
-])])# _AS_TEST_PREPARE
+# serial 3012 ltversion.m4
+# This file is part of GNU Libtool
 
-# AS_EXECUTABLE_P
-# ---------------
-# Check whether a file is executable.
-m4_ifndef([AS_EXECUTABLE_P],
-[m4_defun([AS_EXECUTABLE_P],
-[AS_REQUIRE([_AS_TEST_PREPARE])dnl
-$as_executable_p $1[]dnl
-])])# AS_EXECUTABLE_P
+m4_define([LT_PACKAGE_VERSION], [2.2.6])
+m4_define([LT_PACKAGE_REVISION], [1.3012])
 
-# NOTE: This macro has been submitted for inclusion into   #
-#  GNU Autoconf as AC_PROG_SED.  When it is available in   #
-#  a released version of Autoconf we should remove this    #
-#  macro and use it instead.                               #
-# LT_AC_PROG_SED
-# --------------
-# Check for a fully-functional sed program, that truncates
-# as few characters as possible.  Prefer GNU sed if found.
-AC_DEFUN([LT_AC_PROG_SED],
-[AC_MSG_CHECKING([for a sed that does not truncate output])
-AC_CACHE_VAL(lt_cv_path_SED,
-[# Loop through the user's path and test for sed and gsed.
-# Then use that list of sed's as ones to test for truncation.
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for lt_ac_prog in sed gsed; do
-    for ac_exec_ext in '' $ac_executable_extensions; do
-      if AS_EXECUTABLE_P(["$as_dir/$lt_ac_prog$ac_exec_ext"]); then
-        lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext"
-      fi
-    done
-  done
-done
-IFS=$as_save_IFS
-lt_ac_max=0
-lt_ac_count=0
-# Add /usr/xpg4/bin/sed as it is typically found on Solaris
-# along with /bin/sed that truncates output.
-for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do
-  test ! -f $lt_ac_sed && continue
-  cat /dev/null > conftest.in
-  lt_ac_count=0
-  echo $ECHO_N "0123456789$ECHO_C" >conftest.in
-  # Check for GNU sed and select it if it is found.
-  if "$lt_ac_sed" --version 2>&1 < /dev/null | grep 'GNU' > /dev/null; then
-    lt_cv_path_SED=$lt_ac_sed
-    break
-  fi
-  while true; do
-    cat conftest.in conftest.in >conftest.tmp
-    mv conftest.tmp conftest.in
-    cp conftest.in conftest.nl
-    echo >>conftest.nl
-    $lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break
-    cmp -s conftest.out conftest.nl || break
-    # 10000 chars as input seems more than enough
-    test $lt_ac_count -gt 10 && break
-    lt_ac_count=`expr $lt_ac_count + 1`
-    if test $lt_ac_count -gt $lt_ac_max; then
-      lt_ac_max=$lt_ac_count
-      lt_cv_path_SED=$lt_ac_sed
-    fi
-  done
-done
-])
-SED=$lt_cv_path_SED
-AC_SUBST([SED])
-AC_MSG_RESULT([$SED])
+AC_DEFUN([LTVERSION_VERSION],
+[macro_version='2.2.6'
+macro_revision='1.3012'
+_LT_DECL(, macro_version, 0, [Which release of libtool.m4 was used?])
+_LT_DECL(, macro_revision, 0)
 ])
 
-# Copyright (C) 2002, 2003, 2005, 2006, 2007  Free Software Foundation, Inc.
+# lt~obsolete.m4 -- aclocal satisfying obsolete definitions.    -*-Autoconf-*-
+#
+#   Copyright (C) 2004, 2005, 2007 Free Software Foundation, Inc.
+#   Written by Scott James Remnant, 2004.
+#
+# This file is free software; the Free Software Foundation gives
+# unlimited permission to copy and/or distribute it, with or without
+# modifications, as long as this notice is preserved.
+
+# serial 4 lt~obsolete.m4
+
+# These exist entirely to fool aclocal when bootstrapping libtool.
+#
+# In the past libtool.m4 has provided macros via AC_DEFUN (or AU_DEFUN)
+# which have later been changed to m4_define as they aren't part of the
+# exported API, or moved to Autoconf or Automake where they belong.
+#
+# The trouble is, aclocal is a bit thick.  It'll see the old AC_DEFUN
+# in /usr/share/aclocal/libtool.m4 and remember it, then when it sees us
+# using a macro with the same name in our local m4/libtool.m4 it'll
+# pull the old libtool.m4 in (it doesn't see our shiny new m4_define
+# and doesn't know about Autoconf macros at all.)
+#
+# So we provide this file, which has a silly filename so it's always
+# included after everything else.  This provides aclocal with the
+# AC_DEFUNs it wants, but when m4 processes it, it doesn't do anything
+# because those macros already exist, or will be overwritten later.
+# We use AC_DEFUN over AU_DEFUN for compatibility with aclocal-1.6. 
+#
+# Anytime we withdraw an AC_DEFUN or AU_DEFUN, remember to add it here.
+# Yes, that means every name once taken will need to remain here until
+# we give up compatibility with versions before 1.7, at which point
+# we need to keep only those names which we still refer to.
+
+# This is to help aclocal find these macros, as it can't see m4_define.
+AC_DEFUN([LTOBSOLETE_VERSION], [m4_if([1])])
+
+m4_ifndef([AC_LIBTOOL_LINKER_OPTION],	[AC_DEFUN([AC_LIBTOOL_LINKER_OPTION])])
+m4_ifndef([AC_PROG_EGREP],		[AC_DEFUN([AC_PROG_EGREP])])
+m4_ifndef([_LT_AC_PROG_ECHO_BACKSLASH],	[AC_DEFUN([_LT_AC_PROG_ECHO_BACKSLASH])])
+m4_ifndef([_LT_AC_SHELL_INIT],		[AC_DEFUN([_LT_AC_SHELL_INIT])])
+m4_ifndef([_LT_AC_SYS_LIBPATH_AIX],	[AC_DEFUN([_LT_AC_SYS_LIBPATH_AIX])])
+m4_ifndef([_LT_PROG_LTMAIN],		[AC_DEFUN([_LT_PROG_LTMAIN])])
+m4_ifndef([_LT_AC_TAGVAR],		[AC_DEFUN([_LT_AC_TAGVAR])])
+m4_ifndef([AC_LTDL_ENABLE_INSTALL],	[AC_DEFUN([AC_LTDL_ENABLE_INSTALL])])
+m4_ifndef([AC_LTDL_PREOPEN],		[AC_DEFUN([AC_LTDL_PREOPEN])])
+m4_ifndef([_LT_AC_SYS_COMPILER],	[AC_DEFUN([_LT_AC_SYS_COMPILER])])
+m4_ifndef([_LT_AC_LOCK],		[AC_DEFUN([_LT_AC_LOCK])])
+m4_ifndef([AC_LIBTOOL_SYS_OLD_ARCHIVE],	[AC_DEFUN([AC_LIBTOOL_SYS_OLD_ARCHIVE])])
+m4_ifndef([_LT_AC_TRY_DLOPEN_SELF],	[AC_DEFUN([_LT_AC_TRY_DLOPEN_SELF])])
+m4_ifndef([AC_LIBTOOL_PROG_CC_C_O],	[AC_DEFUN([AC_LIBTOOL_PROG_CC_C_O])])
+m4_ifndef([AC_LIBTOOL_SYS_HARD_LINK_LOCKS], [AC_DEFUN([AC_LIBTOOL_SYS_HARD_LINK_LOCKS])])
+m4_ifndef([AC_LIBTOOL_OBJDIR],		[AC_DEFUN([AC_LIBTOOL_OBJDIR])])
+m4_ifndef([AC_LTDL_OBJDIR],		[AC_DEFUN([AC_LTDL_OBJDIR])])
+m4_ifndef([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH], [AC_DEFUN([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH])])
+m4_ifndef([AC_LIBTOOL_SYS_LIB_STRIP],	[AC_DEFUN([AC_LIBTOOL_SYS_LIB_STRIP])])
+m4_ifndef([AC_PATH_MAGIC],		[AC_DEFUN([AC_PATH_MAGIC])])
+m4_ifndef([AC_PROG_LD_GNU],		[AC_DEFUN([AC_PROG_LD_GNU])])
+m4_ifndef([AC_PROG_LD_RELOAD_FLAG],	[AC_DEFUN([AC_PROG_LD_RELOAD_FLAG])])
+m4_ifndef([AC_DEPLIBS_CHECK_METHOD],	[AC_DEFUN([AC_DEPLIBS_CHECK_METHOD])])
+m4_ifndef([AC_LIBTOOL_PROG_COMPILER_NO_RTTI], [AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_NO_RTTI])])
+m4_ifndef([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE], [AC_DEFUN([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE])])
+m4_ifndef([AC_LIBTOOL_PROG_COMPILER_PIC], [AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_PIC])])
+m4_ifndef([AC_LIBTOOL_PROG_LD_SHLIBS],	[AC_DEFUN([AC_LIBTOOL_PROG_LD_SHLIBS])])
+m4_ifndef([AC_LIBTOOL_POSTDEP_PREDEP],	[AC_DEFUN([AC_LIBTOOL_POSTDEP_PREDEP])])
+m4_ifndef([LT_AC_PROG_EGREP],		[AC_DEFUN([LT_AC_PROG_EGREP])])
+m4_ifndef([LT_AC_PROG_SED],		[AC_DEFUN([LT_AC_PROG_SED])])
+m4_ifndef([_LT_CC_BASENAME],		[AC_DEFUN([_LT_CC_BASENAME])])
+m4_ifndef([_LT_COMPILER_BOILERPLATE],	[AC_DEFUN([_LT_COMPILER_BOILERPLATE])])
+m4_ifndef([_LT_LINKER_BOILERPLATE],	[AC_DEFUN([_LT_LINKER_BOILERPLATE])])
+m4_ifndef([_AC_PROG_LIBTOOL],		[AC_DEFUN([_AC_PROG_LIBTOOL])])
+m4_ifndef([AC_LIBTOOL_SETUP],		[AC_DEFUN([AC_LIBTOOL_SETUP])])
+m4_ifndef([_LT_AC_CHECK_DLFCN],		[AC_DEFUN([_LT_AC_CHECK_DLFCN])])
+m4_ifndef([AC_LIBTOOL_SYS_DYNAMIC_LINKER],	[AC_DEFUN([AC_LIBTOOL_SYS_DYNAMIC_LINKER])])
+m4_ifndef([_LT_AC_TAGCONFIG],		[AC_DEFUN([_LT_AC_TAGCONFIG])])
+m4_ifndef([AC_DISABLE_FAST_INSTALL],	[AC_DEFUN([AC_DISABLE_FAST_INSTALL])])
+m4_ifndef([_LT_AC_LANG_CXX],		[AC_DEFUN([_LT_AC_LANG_CXX])])
+m4_ifndef([_LT_AC_LANG_F77],		[AC_DEFUN([_LT_AC_LANG_F77])])
+m4_ifndef([_LT_AC_LANG_GCJ],		[AC_DEFUN([_LT_AC_LANG_GCJ])])
+m4_ifndef([AC_LIBTOOL_RC],		[AC_DEFUN([AC_LIBTOOL_RC])])
+m4_ifndef([AC_LIBTOOL_LANG_C_CONFIG],	[AC_DEFUN([AC_LIBTOOL_LANG_C_CONFIG])])
+m4_ifndef([_LT_AC_LANG_C_CONFIG],	[AC_DEFUN([_LT_AC_LANG_C_CONFIG])])
+m4_ifndef([AC_LIBTOOL_LANG_CXX_CONFIG],	[AC_DEFUN([AC_LIBTOOL_LANG_CXX_CONFIG])])
+m4_ifndef([_LT_AC_LANG_CXX_CONFIG],	[AC_DEFUN([_LT_AC_LANG_CXX_CONFIG])])
+m4_ifndef([AC_LIBTOOL_LANG_F77_CONFIG],	[AC_DEFUN([AC_LIBTOOL_LANG_F77_CONFIG])])
+m4_ifndef([_LT_AC_LANG_F77_CONFIG],	[AC_DEFUN([_LT_AC_LANG_F77_CONFIG])])
+m4_ifndef([AC_LIBTOOL_LANG_GCJ_CONFIG],	[AC_DEFUN([AC_LIBTOOL_LANG_GCJ_CONFIG])])
+m4_ifndef([_LT_AC_LANG_GCJ_CONFIG],	[AC_DEFUN([_LT_AC_LANG_GCJ_CONFIG])])
+m4_ifndef([AC_LIBTOOL_LANG_RC_CONFIG],	[AC_DEFUN([AC_LIBTOOL_LANG_RC_CONFIG])])
+m4_ifndef([_LT_AC_LANG_RC_CONFIG],	[AC_DEFUN([_LT_AC_LANG_RC_CONFIG])])
+m4_ifndef([AC_LIBTOOL_CONFIG],		[AC_DEFUN([AC_LIBTOOL_CONFIG])])
+m4_ifndef([_LT_AC_FILE_LTDLL_C],	[AC_DEFUN([_LT_AC_FILE_LTDLL_C])])
+
+# Copyright (C) 2002, 2003, 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
@@ -6690,10 +7996,10 @@
 # generated from the m4 files accompanying Automake X.Y.
 # (This private macro should not be called outside this file.)
 AC_DEFUN([AM_AUTOMAKE_VERSION],
-[am__api_version='1.10'
+[am__api_version='1.11'
 dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to
 dnl require some minimum version.  Point them to the right macro.
-m4_if([$1], [1.10.1], [],
+m4_if([$1], [1.11], [],
       [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl
 ])
 
@@ -6707,12 +8013,12 @@
 # AM_SET_CURRENT_AUTOMAKE_VERSION
 # -------------------------------
 # Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced.
-# This function is AC_REQUIREd by AC_INIT_AUTOMAKE.
+# This function is AC_REQUIREd by AM_INIT_AUTOMAKE.
 AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],
-[AM_AUTOMAKE_VERSION([1.10.1])dnl
+[AM_AUTOMAKE_VERSION([1.11])dnl
 m4_ifndef([AC_AUTOCONF_VERSION],
   [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
-_AM_AUTOCONF_VERSION(AC_AUTOCONF_VERSION)])
+_AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))])
 
 # AM_AUX_DIR_EXPAND                                         -*- Autoconf -*-
 
@@ -6769,14 +8075,14 @@
 
 # AM_CONDITIONAL                                            -*- Autoconf -*-
 
-# Copyright (C) 1997, 2000, 2001, 2003, 2004, 2005, 2006
+# Copyright (C) 1997, 2000, 2001, 2003, 2004, 2005, 2006, 2008
 # Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
 
-# serial 8
+# serial 9
 
 # AM_CONDITIONAL(NAME, SHELL-CONDITION)
 # -------------------------------------
@@ -6789,6 +8095,7 @@
 AC_SUBST([$1_FALSE])dnl
 _AM_SUBST_NOTMAKE([$1_TRUE])dnl
 _AM_SUBST_NOTMAKE([$1_FALSE])dnl
+m4_define([_AM_COND_VALUE_$1], [$2])dnl
 if $2; then
   $1_TRUE=
   $1_FALSE='#'
@@ -6802,14 +8109,14 @@
 Usually this means the macro was only invoked conditionally.]])
 fi])])
 
-# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
+# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2009
 # Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
 
-# serial 9
+# serial 10
 
 # There are a few dirty hacks below to avoid letting `AC_PROG_CC' be
 # written in clear, in which case automake, when reading aclocal.m4,
@@ -6866,6 +8173,16 @@
   if test "$am_compiler_list" = ""; then
      am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp`
   fi
+  am__universal=false
+  m4_case([$1], [CC],
+    [case " $depcc " in #(
+     *\ -arch\ *\ -arch\ *) am__universal=true ;;
+     esac],
+    [CXX],
+    [case " $depcc " in #(
+     *\ -arch\ *\ -arch\ *) am__universal=true ;;
+     esac])
+
   for depmode in $am_compiler_list; do
     # Setup a source with many dependencies, because some compilers
     # like to wrap large dependency lists on column 80 (with \), and
@@ -6883,7 +8200,17 @@
     done
     echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
 
+    # We check with `-c' and `-o' for the sake of the "dashmstdout"
+    # mode.  It turns out that the SunPro C++ compiler does not properly
+    # handle `-M -o', and we need to detect this.  Also, some Intel
+    # versions had trouble with output in subdirs
+    am__obj=sub/conftest.${OBJEXT-o}
+    am__minus_obj="-o $am__obj"
     case $depmode in
+    gcc)
+      # This depmode causes a compiler race in universal mode.
+      test "$am__universal" = false || continue
+      ;;
     nosideeffect)
       # after this tag, mechanisms are not by side-effect, so they'll
       # only be used when explicitly requested
@@ -6893,19 +8220,23 @@
 	break
       fi
       ;;
+    msvisualcpp | msvcmsys)
+      # This compiler won't grok `-c -o', but also, the minuso test has
+      # not run yet.  These depmodes are late enough in the game, and
+      # so weak that their functioning should not be impacted.
+      am__obj=conftest.${OBJEXT-o}
+      am__minus_obj=
+      ;;
     none) break ;;
     esac
-    # We check with `-c' and `-o' for the sake of the "dashmstdout"
-    # mode.  It turns out that the SunPro C++ compiler does not properly
-    # handle `-M -o', and we need to detect this.
     if depmode=$depmode \
-       source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \
+       source=sub/conftest.c object=$am__obj \
        depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
-       $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \
+       $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \
          >/dev/null 2>conftest.err &&
        grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
        grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
-       grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 &&
+       grep $am__obj sub/conftest.Po > /dev/null 2>&1 &&
        ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
       # icc doesn't choke on unknown options, it will just issue warnings
       # or remarks (even with -Werror).  So we grep stderr for any message
@@ -6962,57 +8293,68 @@
 
 # Generate code to set up dependency tracking.              -*- Autoconf -*-
 
-# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005
+# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2008
 # Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
 
-#serial 3
+#serial 5
 
 # _AM_OUTPUT_DEPENDENCY_COMMANDS
 # ------------------------------
 AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS],
-[for mf in $CONFIG_FILES; do
-  # Strip MF so we end up with the name of the file.
-  mf=`echo "$mf" | sed -e 's/:.*$//'`
-  # Check whether this is an Automake generated Makefile or not.
-  # We used to match only the files named `Makefile.in', but
-  # some people rename them; so instead we look at the file content.
-  # Grep'ing the first line is not enough: some people post-process
-  # each Makefile.in and add a new line on top of each file to say so.
-  # Grep'ing the whole file is not good either: AIX grep has a line
-  # limit of 2048, but all sed's we know have understand at least 4000.
-  if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then
-    dirpart=`AS_DIRNAME("$mf")`
-  else
-    continue
-  fi
-  # Extract the definition of DEPDIR, am__include, and am__quote
-  # from the Makefile without running `make'.
-  DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
-  test -z "$DEPDIR" && continue
-  am__include=`sed -n 's/^am__include = //p' < "$mf"`
-  test -z "am__include" && continue
-  am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
-  # When using ansi2knr, U may be empty or an underscore; expand it
-  U=`sed -n 's/^U = //p' < "$mf"`
-  # Find all dependency output files, they are included files with
-  # $(DEPDIR) in their names.  We invoke sed twice because it is the
-  # simplest approach to changing $(DEPDIR) to its actual value in the
-  # expansion.
-  for file in `sed -n "
-    s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
-       sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
-    # Make sure the directory exists.
-    test -f "$dirpart/$file" && continue
-    fdir=`AS_DIRNAME(["$file"])`
-    AS_MKDIR_P([$dirpart/$fdir])
-    # echo "creating $dirpart/$file"
-    echo '# dummy' > "$dirpart/$file"
+[{
+  # Autoconf 2.62 quotes --file arguments for eval, but not when files
+  # are listed without --file.  Let's play safe and only enable the eval
+  # if we detect the quoting.
+  case $CONFIG_FILES in
+  *\'*) eval set x "$CONFIG_FILES" ;;
+  *)   set x $CONFIG_FILES ;;
+  esac
+  shift
+  for mf
+  do
+    # Strip MF so we end up with the name of the file.
+    mf=`echo "$mf" | sed -e 's/:.*$//'`
+    # Check whether this is an Automake generated Makefile or not.
+    # We used to match only the files named `Makefile.in', but
+    # some people rename them; so instead we look at the file content.
+    # Grep'ing the first line is not enough: some people post-process
+    # each Makefile.in and add a new line on top of each file to say so.
+    # Grep'ing the whole file is not good either: AIX grep has a line
+    # limit of 2048, but all sed's we know have understand at least 4000.
+    if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then
+      dirpart=`AS_DIRNAME("$mf")`
+    else
+      continue
+    fi
+    # Extract the definition of DEPDIR, am__include, and am__quote
+    # from the Makefile without running `make'.
+    DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
+    test -z "$DEPDIR" && continue
+    am__include=`sed -n 's/^am__include = //p' < "$mf"`
+    test -z "am__include" && continue
+    am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
+    # When using ansi2knr, U may be empty or an underscore; expand it
+    U=`sed -n 's/^U = //p' < "$mf"`
+    # Find all dependency output files, they are included files with
+    # $(DEPDIR) in their names.  We invoke sed twice because it is the
+    # simplest approach to changing $(DEPDIR) to its actual value in the
+    # expansion.
+    for file in `sed -n "
+      s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
+	 sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
+      # Make sure the directory exists.
+      test -f "$dirpart/$file" && continue
+      fdir=`AS_DIRNAME(["$file"])`
+      AS_MKDIR_P([$dirpart/$fdir])
+      # echo "creating $dirpart/$file"
+      echo '# dummy' > "$dirpart/$file"
+    done
   done
-done
+}
 ])# _AM_OUTPUT_DEPENDENCY_COMMANDS
 
 
@@ -7032,13 +8374,13 @@
 # Do all the work for Automake.                             -*- Autoconf -*-
 
 # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
-# 2005, 2006, 2008 Free Software Foundation, Inc.
+# 2005, 2006, 2008, 2009 Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
 
-# serial 13
+# serial 16
 
 # This macro actually does too much.  Some checks are only needed if
 # your package does certain things.  But this isn't really a big deal.
@@ -7055,7 +8397,7 @@
 # arguments mandatory, and then we can depend on a new Autoconf
 # release and drop the old call support.
 AC_DEFUN([AM_INIT_AUTOMAKE],
-[AC_PREREQ([2.60])dnl
+[AC_PREREQ([2.62])dnl
 dnl Autoconf wants to disallow AM_ names.  We explicitly allow
 dnl the ones we care about.
 m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl
@@ -7106,8 +8448,8 @@
 AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version})
 AM_MISSING_PROG(AUTOHEADER, autoheader)
 AM_MISSING_PROG(MAKEINFO, makeinfo)
-AM_PROG_INSTALL_SH
-AM_PROG_INSTALL_STRIP
+AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
+AC_REQUIRE([AM_PROG_INSTALL_STRIP])dnl
 AC_REQUIRE([AM_PROG_MKDIR_P])dnl
 # We need awk for the "check" target.  The system "awk" is bad on
 # some platforms.
@@ -7115,24 +8457,37 @@
 AC_REQUIRE([AC_PROG_MAKE_SET])dnl
 AC_REQUIRE([AM_SET_LEADING_DOT])dnl
 _AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])],
-              [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])],
-	      		     [_AM_PROG_TAR([v7])])])
+	      [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])],
+			     [_AM_PROG_TAR([v7])])])
 _AM_IF_OPTION([no-dependencies],,
 [AC_PROVIDE_IFELSE([AC_PROG_CC],
-                  [_AM_DEPENDENCIES(CC)],
-                  [define([AC_PROG_CC],
-                          defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl
+		  [_AM_DEPENDENCIES(CC)],
+		  [define([AC_PROG_CC],
+			  defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl
 AC_PROVIDE_IFELSE([AC_PROG_CXX],
-                  [_AM_DEPENDENCIES(CXX)],
-                  [define([AC_PROG_CXX],
-                          defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl
+		  [_AM_DEPENDENCIES(CXX)],
+		  [define([AC_PROG_CXX],
+			  defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl
 AC_PROVIDE_IFELSE([AC_PROG_OBJC],
-                  [_AM_DEPENDENCIES(OBJC)],
-                  [define([AC_PROG_OBJC],
-                          defn([AC_PROG_OBJC])[_AM_DEPENDENCIES(OBJC)])])dnl
+		  [_AM_DEPENDENCIES(OBJC)],
+		  [define([AC_PROG_OBJC],
+			  defn([AC_PROG_OBJC])[_AM_DEPENDENCIES(OBJC)])])dnl
 ])
+_AM_IF_OPTION([silent-rules], [AC_REQUIRE([AM_SILENT_RULES])])dnl
+dnl The `parallel-tests' driver may need to know about EXEEXT, so add the
+dnl `am__EXEEXT' conditional if _AM_COMPILER_EXEEXT was seen.  This macro
+dnl is hooked onto _AC_COMPILER_EXEEXT early, see below.
+AC_CONFIG_COMMANDS_PRE(dnl
+[m4_provide_if([_AM_COMPILER_EXEEXT],
+  [AM_CONDITIONAL([am__EXEEXT], [test -n "$EXEEXT"])])])dnl
 ])
 
+dnl Hook into `_AC_COMPILER_EXEEXT' early to learn its expansion.  Do not
+dnl add the conditional right here, as _AC_COMPILER_EXEEXT may be further
+dnl mangled by Autoconf and run in a shell conditional statement.
+m4_define([_AC_COMPILER_EXEEXT],
+m4_defn([_AC_COMPILER_EXEEXT])[m4_provide([_AM_COMPILER_EXEEXT])])
+
 
 # When config.status generates a header, we must update the stamp-h file.
 # This file resides in the same directory as the config header
@@ -7155,7 +8510,7 @@
 done
 echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count])
 
-# Copyright (C) 2001, 2003, 2005  Free Software Foundation, Inc.
+# Copyright (C) 2001, 2003, 2005, 2008  Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
@@ -7166,7 +8521,14 @@
 # Define $install_sh.
 AC_DEFUN([AM_PROG_INSTALL_SH],
 [AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
-install_sh=${install_sh-"\$(SHELL) $am_aux_dir/install-sh"}
+if test x"${install_sh}" != xset; then
+  case $am_aux_dir in
+  *\ * | *\	*)
+    install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;;
+  *)
+    install_sh="\${SHELL} $am_aux_dir/install-sh"
+  esac
+fi
 AC_SUBST(install_sh)])
 
 # Copyright (C) 2003, 2005  Free Software Foundation, Inc.
@@ -7192,13 +8554,13 @@
 
 # Check to see how 'make' treats includes.	            -*- Autoconf -*-
 
-# Copyright (C) 2001, 2002, 2003, 2005  Free Software Foundation, Inc.
+# Copyright (C) 2001, 2002, 2003, 2005, 2009  Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
 
-# serial 3
+# serial 4
 
 # AM_MAKE_INCLUDE()
 # -----------------
@@ -7207,7 +8569,7 @@
 [am_make=${MAKE-make}
 cat > confinc << 'END'
 am__doit:
-	@echo done
+	@echo this is the am__doit target
 .PHONY: am__doit
 END
 # If we don't find an include directive, just comment out the code.
@@ -7217,24 +8579,24 @@
 _am_result=none
 # First try GNU make style include.
 echo "include confinc" > confmf
-# We grep out `Entering directory' and `Leaving directory'
-# messages which can occur if `w' ends up in MAKEFLAGS.
-# In particular we don't look at `^make:' because GNU make might
-# be invoked under some other name (usually "gmake"), in which
-# case it prints its new name instead of `make'.
-if test "`$am_make -s -f confmf 2> /dev/null | grep -v 'ing directory'`" = "done"; then
-   am__include=include
-   am__quote=
-   _am_result=GNU
-fi
+# Ignore all kinds of additional output from `make'.
+case `$am_make -s -f confmf 2> /dev/null` in #(
+*the\ am__doit\ target*)
+  am__include=include
+  am__quote=
+  _am_result=GNU
+  ;;
+esac
 # Now try BSD make style include.
 if test "$am__include" = "#"; then
    echo '.include "confinc"' > confmf
-   if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then
-      am__include=.include
-      am__quote="\""
-      _am_result=BSD
-   fi
+   case `$am_make -s -f confmf 2> /dev/null` in #(
+   *the\ am__doit\ target*)
+     am__include=.include
+     am__quote="\""
+     _am_result=BSD
+     ;;
+   esac
 fi
 AC_SUBST([am__include])
 AC_SUBST([am__quote])
@@ -7244,14 +8606,14 @@
 
 # Fake the existence of programs that GNU maintainers use.  -*- Autoconf -*-
 
-# Copyright (C) 1997, 1999, 2000, 2001, 2003, 2004, 2005
+# Copyright (C) 1997, 1999, 2000, 2001, 2003, 2004, 2005, 2008
 # Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
 
-# serial 5
+# serial 6
 
 # AM_MISSING_PROG(NAME, PROGRAM)
 # ------------------------------
@@ -7268,7 +8630,14 @@
 AC_DEFUN([AM_MISSING_HAS_RUN],
 [AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
 AC_REQUIRE_AUX_FILE([missing])dnl
-test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing"
+if test x"${MISSING+set}" != xset; then
+  case $am_aux_dir in
+  *\ * | *\	*)
+    MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;;
+  *)
+    MISSING="\${SHELL} $am_aux_dir/missing" ;;
+  esac
+fi
 # Use eval to expand $SHELL
 if eval "$MISSING --run true"; then
   am_missing_run="$MISSING --run "
@@ -7306,13 +8675,13 @@
 
 # Helper functions for option handling.                     -*- Autoconf -*-
 
-# Copyright (C) 2001, 2002, 2003, 2005  Free Software Foundation, Inc.
+# Copyright (C) 2001, 2002, 2003, 2005, 2008  Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
 
-# serial 3
+# serial 4
 
 # _AM_MANGLE_OPTION(NAME)
 # -----------------------
@@ -7329,7 +8698,7 @@
 # ----------------------------------
 # OPTIONS is a space-separated list of Automake options.
 AC_DEFUN([_AM_SET_OPTIONS],
-[AC_FOREACH([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])])
+[m4_foreach_w([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])])
 
 # _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET])
 # -------------------------------------------
@@ -7339,14 +8708,14 @@
 
 # Check to make sure that the build environment is sane.    -*- Autoconf -*-
 
-# Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005
+# Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005, 2008
 # Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
 
-# serial 4
+# serial 5
 
 # AM_SANITY_CHECK
 # ---------------
@@ -7355,16 +8724,29 @@
 # Just in case
 sleep 1
 echo timestamp > conftest.file
+# Reject unsafe characters in $srcdir or the absolute working directory
+# name.  Accept space and tab only in the latter.
+am_lf='
+'
+case `pwd` in
+  *[[\\\"\#\$\&\'\`$am_lf]]*)
+    AC_MSG_ERROR([unsafe absolute working directory name]);;
+esac
+case $srcdir in
+  *[[\\\"\#\$\&\'\`$am_lf\ \	]]*)
+    AC_MSG_ERROR([unsafe srcdir value: `$srcdir']);;
+esac
+
 # Do `set' in a subshell so we don't clobber the current shell's
 # arguments.  Must try -L first in case configure is actually a
 # symlink; some systems play weird games with the mod time of symlinks
 # (eg FreeBSD returns the mod time of the symlink's containing
 # directory).
 if (
-   set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null`
+   set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`
    if test "$[*]" = "X"; then
       # -L didn't work.
-      set X `ls -t $srcdir/configure conftest.file`
+      set X `ls -t "$srcdir/configure" conftest.file`
    fi
    rm -f conftest.file
    if test "$[*]" != "X $srcdir/configure conftest.file" \
@@ -7417,18 +8799,25 @@
 INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
 AC_SUBST([INSTALL_STRIP_PROGRAM])])
 
-# Copyright (C) 2006  Free Software Foundation, Inc.
+# Copyright (C) 2006, 2008  Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
 
+# serial 2
+
 # _AM_SUBST_NOTMAKE(VARIABLE)
 # ---------------------------
 # Prevent Automake from outputting VARIABLE = @VARIABLE@ in Makefile.in.
 # This macro is traced by Automake.
 AC_DEFUN([_AM_SUBST_NOTMAKE])
 
+# AM_SUBST_NOTMAKE(VARIABLE)
+# ---------------------------
+# Public sister of _AM_SUBST_NOTMAKE.
+AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)])
+
 # Check how to create a tarball.                            -*- Autoconf -*-
 
 # Copyright (C) 2004, 2005  Free Software Foundation, Inc.
--- ode-0.11.orig/ou/src/ou/Makefile.in
+++ ode-0.11/ou/src/ou/Makefile.in
@@ -1,8 +1,9 @@
-# Makefile.in generated by automake 1.10.1 from Makefile.am.
+# Makefile.in generated by automake 1.11 from Makefile.am.
 # @configure_input@
 
 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
+# Inc.
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -16,8 +17,9 @@
 
 VPATH = @srcdir@
 pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
 install_sh_DATA = $(install_sh) -c -m 644
 install_sh_PROGRAM = $(install_sh) -c
@@ -40,6 +42,7 @@
 	$(ACLOCAL_M4)
 mkinstalldirs = $(install_sh) -d
 CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
 LTLIBRARIES = $(noinst_LTLIBRARIES)
 libou_la_LIBADD =
 am_libou_la_OBJECTS = atomic.lo customization.lo malloc.lo \
@@ -48,6 +51,7 @@
 DEFAULT_INCLUDES = -I.@am__isrc@
 depcomp = $(SHELL) $(top_srcdir)/../depcomp
 am__depfiles_maybe = depfiles
+am__mv = mv -f
 CXXCOMPILE = $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
 	$(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS)
 LTCXXCOMPILE = $(LIBTOOL) --tag=CXX $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
@@ -84,37 +88,42 @@
 DEPDIR = @DEPDIR@
 DLLTOOL = @DLLTOOL@
 DSYMUTIL = @DSYMUTIL@
-ECHO = @ECHO@
+DUMPBIN = @DUMPBIN@
 ECHO_C = @ECHO_C@
 ECHO_N = @ECHO_N@
 ECHO_T = @ECHO_T@
 EGREP = @EGREP@
 EXEEXT = @EXEEXT@
-F77 = @F77@
-FFLAGS = @FFLAGS@
+FGREP = @FGREP@
 GREP = @GREP@
 INSTALL = @INSTALL@
 INSTALL_DATA = @INSTALL_DATA@
 INSTALL_PROGRAM = @INSTALL_PROGRAM@
 INSTALL_SCRIPT = @INSTALL_SCRIPT@
 INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LD = @LD@
 LDFLAGS = @LDFLAGS@
 LIBOBJS = @LIBOBJS@
 LIBS = @LIBS@
 LIBTOOL = @LIBTOOL@
+LIPO = @LIPO@
 LN_S = @LN_S@
 LTLIBOBJS = @LTLIBOBJS@
 MAKEINFO = @MAKEINFO@
 MKDIR_P = @MKDIR_P@
+NM = @NM@
 NMEDIT = @NMEDIT@
 OBJDUMP = @OBJDUMP@
 OBJEXT = @OBJEXT@
+OTOOL = @OTOOL@
+OTOOL64 = @OTOOL64@
 OU_NAMESPACE = @OU_NAMESPACE@
 PACKAGE = @PACKAGE@
 PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
 PACKAGE_NAME = @PACKAGE_NAME@
 PACKAGE_STRING = @PACKAGE_STRING@
 PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
 PACKAGE_VERSION = @PACKAGE_VERSION@
 PATH_SEPARATOR = @PATH_SEPARATOR@
 RANLIB = @RANLIB@
@@ -129,7 +138,7 @@
 abs_top_srcdir = @abs_top_srcdir@
 ac_ct_CC = @ac_ct_CC@
 ac_ct_CXX = @ac_ct_CXX@
-ac_ct_F77 = @ac_ct_F77@
+ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
 am__include = @am__include@
 am__leading_dot = @am__leading_dot@
 am__quote = @am__quote@
@@ -160,6 +169,7 @@
 libexecdir = @libexecdir@
 localedir = @localedir@
 localstatedir = @localstatedir@
+lt_ECHO = @lt_ECHO@
 mandir = @mandir@
 mkdir_p = @mkdir_p@
 oldincludedir = @oldincludedir@
@@ -192,14 +202,14 @@
 	@for dep in $?; do \
 	  case '$(am__configure_deps)' in \
 	    *$$dep*) \
-	      cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
-		&& exit 0; \
+	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+	        && { if test -f $@; then exit 0; else break; fi; }; \
 	      exit 1;; \
 	  esac; \
 	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign  src/ou/Makefile'; \
-	cd $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign  src/ou/Makefile
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign src/ou/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign src/ou/Makefile
 .PRECIOUS: Makefile
 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 	@case '$?' in \
@@ -217,6 +227,7 @@
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 $(ACLOCAL_M4):  $(am__aclocal_m4_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
 
 clean-noinstLTLIBRARIES:
 	-test -z "$(noinst_LTLIBRARIES)" || rm -f $(noinst_LTLIBRARIES)
@@ -242,21 +253,21 @@
 
 .cpp.o:
 @am__fastdepCXX_TRUE@	$(CXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCXX_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCXX_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCXX_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCXX_FALSE@	$(CXXCOMPILE) -c -o $@ $<
 
 .cpp.obj:
 @am__fastdepCXX_TRUE@	$(CXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
-@am__fastdepCXX_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCXX_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCXX_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCXX_FALSE@	$(CXXCOMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
 
 .cpp.lo:
 @am__fastdepCXX_TRUE@	$(LTCXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCXX_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
+@am__fastdepCXX_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
 @AMDEP_TRUE@@am__fastdepCXX_FALSE@	source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCXX_FALSE@	$(LTCXXCOMPILE) -c -o $@ $<
@@ -272,14 +283,14 @@
 	unique=`for i in $$list; do \
 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 	  done | \
-	  $(AWK) '{ files[$$0] = 1; nonemtpy = 1; } \
+	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
 	mkid -fID $$unique
 tags: TAGS
 
 TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
+	set x; \
 	here=`pwd`; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
@@ -287,29 +298,34 @@
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
 	  test -n "$$unique" || unique=$$empty_fix; \
-	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	    $$tags $$unique; \
+	  if test $$# -gt 0; then \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
 	fi
 ctags: CTAGS
 CTAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	test -z "$(CTAGS_ARGS)$$tags$$unique" \
+	test -z "$(CTAGS_ARGS)$$unique" \
 	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
-	     $$tags $$unique
+	     $$unique
 
 GTAGS:
 	here=`$(am__cd) $(top_builddir) && pwd` \
-	  && cd $(top_srcdir) \
-	  && gtags -i $(GTAGS_ARGS) $$here
+	  && $(am__cd) $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) "$$here"
 
 distclean-tags:
 	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
@@ -330,13 +346,17 @@
 	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
 	  if test -d $$d/$$file; then \
 	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
 	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 	    fi; \
-	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
 	  else \
-	    test -f $(distdir)/$$file \
-	    || cp -p $$d/$$file $(distdir)/$$file \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
 	    || exit 1; \
 	  fi; \
 	done
@@ -364,6 +384,7 @@
 
 distclean-generic:
 	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
 
 maintainer-clean-generic:
 	@echo "This command is intended for maintainers to use"
@@ -385,6 +406,8 @@
 
 html: html-am
 
+html-am:
+
 info: info-am
 
 info-am:
@@ -393,18 +416,28 @@
 
 install-dvi: install-dvi-am
 
+install-dvi-am:
+
 install-exec-am:
 
 install-html: install-html-am
 
+install-html-am:
+
 install-info: install-info-am
 
+install-info-am:
+
 install-man:
 
 install-pdf: install-pdf-am
 
+install-pdf-am:
+
 install-ps: install-ps-am
 
+install-ps-am:
+
 installcheck-am:
 
 maintainer-clean: maintainer-clean-am
@@ -442,6 +475,7 @@
 	mostlyclean-compile mostlyclean-generic mostlyclean-libtool \
 	pdf pdf-am ps ps-am tags uninstall uninstall-am
 
+
 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 # Otherwise a system limit (for SysV at least) may be exceeded.
 .NOEXPORT:
--- ode-0.11.orig/ou/test/Makefile.in
+++ ode-0.11/ou/test/Makefile.in
@@ -1,8 +1,9 @@
-# Makefile.in generated by automake 1.10.1 from Makefile.am.
+# Makefile.in generated by automake 1.11 from Makefile.am.
 # @configure_input@
 
 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
+# Inc.
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -15,8 +16,9 @@
 @SET_MAKE@
 VPATH = @srcdir@
 pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
 install_sh_DATA = $(install_sh) -c -m 644
 install_sh_PROGRAM = $(install_sh) -c
@@ -40,12 +42,14 @@
 	$(ACLOCAL_M4)
 mkinstalldirs = $(install_sh) -d
 CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
 am_outest_OBJECTS = outest.$(OBJEXT)
 outest_OBJECTS = $(am_outest_OBJECTS)
 outest_DEPENDENCIES = $(top_builddir)/src/ou/libou.la
 DEFAULT_INCLUDES = -I.@am__isrc@
 depcomp = $(SHELL) $(top_srcdir)/../depcomp
 am__depfiles_maybe = depfiles
+am__mv = mv -f
 CXXCOMPILE = $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
 	$(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS)
 LTCXXCOMPILE = $(LIBTOOL) --tag=CXX $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
@@ -82,37 +86,42 @@
 DEPDIR = @DEPDIR@
 DLLTOOL = @DLLTOOL@
 DSYMUTIL = @DSYMUTIL@
-ECHO = @ECHO@
+DUMPBIN = @DUMPBIN@
 ECHO_C = @ECHO_C@
 ECHO_N = @ECHO_N@
 ECHO_T = @ECHO_T@
 EGREP = @EGREP@
 EXEEXT = @EXEEXT@
-F77 = @F77@
-FFLAGS = @FFLAGS@
+FGREP = @FGREP@
 GREP = @GREP@
 INSTALL = @INSTALL@
 INSTALL_DATA = @INSTALL_DATA@
 INSTALL_PROGRAM = @INSTALL_PROGRAM@
 INSTALL_SCRIPT = @INSTALL_SCRIPT@
 INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LD = @LD@
 LDFLAGS = @LDFLAGS@
 LIBOBJS = @LIBOBJS@
 LIBS = @LIBS@
 LIBTOOL = @LIBTOOL@
+LIPO = @LIPO@
 LN_S = @LN_S@
 LTLIBOBJS = @LTLIBOBJS@
 MAKEINFO = @MAKEINFO@
 MKDIR_P = @MKDIR_P@
+NM = @NM@
 NMEDIT = @NMEDIT@
 OBJDUMP = @OBJDUMP@
 OBJEXT = @OBJEXT@
+OTOOL = @OTOOL@
+OTOOL64 = @OTOOL64@
 OU_NAMESPACE = @OU_NAMESPACE@
 PACKAGE = @PACKAGE@
 PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
 PACKAGE_NAME = @PACKAGE_NAME@
 PACKAGE_STRING = @PACKAGE_STRING@
 PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
 PACKAGE_VERSION = @PACKAGE_VERSION@
 PATH_SEPARATOR = @PATH_SEPARATOR@
 RANLIB = @RANLIB@
@@ -127,7 +136,7 @@
 abs_top_srcdir = @abs_top_srcdir@
 ac_ct_CC = @ac_ct_CC@
 ac_ct_CXX = @ac_ct_CXX@
-ac_ct_F77 = @ac_ct_F77@
+ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
 am__include = @am__include@
 am__leading_dot = @am__leading_dot@
 am__quote = @am__quote@
@@ -158,6 +167,7 @@
 libexecdir = @libexecdir@
 localedir = @localedir@
 localstatedir = @localstatedir@
+lt_ECHO = @lt_ECHO@
 mandir = @mandir@
 mkdir_p = @mkdir_p@
 oldincludedir = @oldincludedir@
@@ -186,14 +196,14 @@
 	@for dep in $?; do \
 	  case '$(am__configure_deps)' in \
 	    *$$dep*) \
-	      cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
-		&& exit 0; \
+	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+	        && { if test -f $@; then exit 0; else break; fi; }; \
 	      exit 1;; \
 	  esac; \
 	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign  test/Makefile'; \
-	cd $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign  test/Makefile
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign test/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign test/Makefile
 .PRECIOUS: Makefile
 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 	@case '$?' in \
@@ -211,13 +221,16 @@
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 $(ACLOCAL_M4):  $(am__aclocal_m4_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
 
 clean-checkPROGRAMS:
-	@list='$(check_PROGRAMS)'; for p in $$list; do \
-	  f=`echo $$p|sed 's/$(EXEEXT)$$//'`; \
-	  echo " rm -f $$p $$f"; \
-	  rm -f $$p $$f ; \
-	done
+	@list='$(check_PROGRAMS)'; test -n "$$list" || exit 0; \
+	echo " rm -f" $$list; \
+	rm -f $$list || exit $$?; \
+	test -n "$(EXEEXT)" || exit 0; \
+	list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
+	echo " rm -f" $$list; \
+	rm -f $$list
 outest$(EXEEXT): $(outest_OBJECTS) $(outest_DEPENDENCIES) 
 	@rm -f outest$(EXEEXT)
 	$(CXXLINK) $(outest_OBJECTS) $(outest_LDADD) $(LIBS)
@@ -232,21 +245,21 @@
 
 .cpp.o:
 @am__fastdepCXX_TRUE@	$(CXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCXX_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCXX_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCXX_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCXX_FALSE@	$(CXXCOMPILE) -c -o $@ $<
 
 .cpp.obj:
 @am__fastdepCXX_TRUE@	$(CXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
-@am__fastdepCXX_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCXX_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCXX_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCXX_FALSE@	$(CXXCOMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
 
 .cpp.lo:
 @am__fastdepCXX_TRUE@	$(LTCXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCXX_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
+@am__fastdepCXX_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
 @AMDEP_TRUE@@am__fastdepCXX_FALSE@	source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCXX_FALSE@	$(LTCXXCOMPILE) -c -o $@ $<
@@ -262,14 +275,14 @@
 	unique=`for i in $$list; do \
 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 	  done | \
-	  $(AWK) '{ files[$$0] = 1; nonemtpy = 1; } \
+	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
 	mkid -fID $$unique
 tags: TAGS
 
 TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
+	set x; \
 	here=`pwd`; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
@@ -277,29 +290,34 @@
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
 	  test -n "$$unique" || unique=$$empty_fix; \
-	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	    $$tags $$unique; \
+	  if test $$# -gt 0; then \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
 	fi
 ctags: CTAGS
 CTAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	test -z "$(CTAGS_ARGS)$$tags$$unique" \
+	test -z "$(CTAGS_ARGS)$$unique" \
 	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
-	     $$tags $$unique
+	     $$unique
 
 GTAGS:
 	here=`$(am__cd) $(top_builddir) && pwd` \
-	  && cd $(top_srcdir) \
-	  && gtags -i $(GTAGS_ARGS) $$here
+	  && $(am__cd) $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) "$$here"
 
 distclean-tags:
 	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
@@ -320,13 +338,17 @@
 	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
 	  if test -d $$d/$$file; then \
 	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
 	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 	    fi; \
-	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
 	  else \
-	    test -f $(distdir)/$$file \
-	    || cp -p $$d/$$file $(distdir)/$$file \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
 	    || exit 1; \
 	  fi; \
 	done
@@ -355,6 +377,7 @@
 
 distclean-generic:
 	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
 
 maintainer-clean-generic:
 	@echo "This command is intended for maintainers to use"
@@ -376,6 +399,8 @@
 
 html: html-am
 
+html-am:
+
 info: info-am
 
 info-am:
@@ -384,18 +409,28 @@
 
 install-dvi: install-dvi-am
 
+install-dvi-am:
+
 install-exec-am:
 
 install-html: install-html-am
 
+install-html-am:
+
 install-info: install-info-am
 
+install-info-am:
+
 install-man:
 
 install-pdf: install-pdf-am
 
+install-pdf-am:
+
 install-ps: install-ps-am
 
+install-ps-am:
+
 installcheck-am:
 
 maintainer-clean: maintainer-clean-am
@@ -418,7 +453,7 @@
 
 uninstall-am:
 
-.MAKE: install-am install-strip
+.MAKE: check-am install-am install-strip
 
 .PHONY: CTAGS GTAGS all all-am check check-am clean \
 	clean-checkPROGRAMS clean-generic clean-libtool ctags \
@@ -434,6 +469,7 @@
 	mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
 	tags uninstall uninstall-am
 
+
 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 # Otherwise a system limit (for SysV at least) may be exceeded.
 .NOEXPORT:
--- ode-0.11.orig/ou/include/ou/Makefile.in
+++ ode-0.11/ou/include/ou/Makefile.in
@@ -1,8 +1,9 @@
-# Makefile.in generated by automake 1.10.1 from Makefile.am.
+# Makefile.in generated by automake 1.11 from Makefile.am.
 # @configure_input@
 
 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
+# Inc.
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -15,8 +16,9 @@
 @SET_MAKE@
 VPATH = @srcdir@
 pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
 install_sh_DATA = $(install_sh) -c -m 644
 install_sh_PROGRAM = $(install_sh) -c
@@ -39,6 +41,7 @@
 	$(ACLOCAL_M4)
 mkinstalldirs = $(install_sh) -d
 CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
 SOURCES =
 DIST_SOURCES =
 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
@@ -64,37 +67,42 @@
 DEPDIR = @DEPDIR@
 DLLTOOL = @DLLTOOL@
 DSYMUTIL = @DSYMUTIL@
-ECHO = @ECHO@
+DUMPBIN = @DUMPBIN@
 ECHO_C = @ECHO_C@
 ECHO_N = @ECHO_N@
 ECHO_T = @ECHO_T@
 EGREP = @EGREP@
 EXEEXT = @EXEEXT@
-F77 = @F77@
-FFLAGS = @FFLAGS@
+FGREP = @FGREP@
 GREP = @GREP@
 INSTALL = @INSTALL@
 INSTALL_DATA = @INSTALL_DATA@
 INSTALL_PROGRAM = @INSTALL_PROGRAM@
 INSTALL_SCRIPT = @INSTALL_SCRIPT@
 INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LD = @LD@
 LDFLAGS = @LDFLAGS@
 LIBOBJS = @LIBOBJS@
 LIBS = @LIBS@
 LIBTOOL = @LIBTOOL@
+LIPO = @LIPO@
 LN_S = @LN_S@
 LTLIBOBJS = @LTLIBOBJS@
 MAKEINFO = @MAKEINFO@
 MKDIR_P = @MKDIR_P@
+NM = @NM@
 NMEDIT = @NMEDIT@
 OBJDUMP = @OBJDUMP@
 OBJEXT = @OBJEXT@
+OTOOL = @OTOOL@
+OTOOL64 = @OTOOL64@
 OU_NAMESPACE = @OU_NAMESPACE@
 PACKAGE = @PACKAGE@
 PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
 PACKAGE_NAME = @PACKAGE_NAME@
 PACKAGE_STRING = @PACKAGE_STRING@
 PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
 PACKAGE_VERSION = @PACKAGE_VERSION@
 PATH_SEPARATOR = @PATH_SEPARATOR@
 RANLIB = @RANLIB@
@@ -109,7 +117,7 @@
 abs_top_srcdir = @abs_top_srcdir@
 ac_ct_CC = @ac_ct_CC@
 ac_ct_CXX = @ac_ct_CXX@
-ac_ct_F77 = @ac_ct_F77@
+ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
 am__include = @am__include@
 am__leading_dot = @am__leading_dot@
 am__quote = @am__quote@
@@ -140,6 +148,7 @@
 libexecdir = @libexecdir@
 localedir = @localedir@
 localstatedir = @localstatedir@
+lt_ECHO = @lt_ECHO@
 mandir = @mandir@
 mkdir_p = @mkdir_p@
 oldincludedir = @oldincludedir@
@@ -179,14 +188,14 @@
 	@for dep in $?; do \
 	  case '$(am__configure_deps)' in \
 	    *$$dep*) \
-	      cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
-		&& exit 0; \
+	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+	        && { if test -f $@; then exit 0; else break; fi; }; \
 	      exit 1;; \
 	  esac; \
 	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign  include/ou/Makefile'; \
-	cd $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign  include/ou/Makefile
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign include/ou/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign include/ou/Makefile
 .PRECIOUS: Makefile
 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 	@case '$?' in \
@@ -204,6 +213,7 @@
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 $(ACLOCAL_M4):  $(am__aclocal_m4_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
 
 mostlyclean-libtool:
 	-rm -f *.lo
@@ -233,13 +243,17 @@
 	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
 	  if test -d $$d/$$file; then \
 	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
 	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 	    fi; \
-	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
 	  else \
-	    test -f $(distdir)/$$file \
-	    || cp -p $$d/$$file $(distdir)/$$file \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
 	    || exit 1; \
 	  fi; \
 	done
@@ -267,6 +281,7 @@
 
 distclean-generic:
 	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
 
 maintainer-clean-generic:
 	@echo "This command is intended for maintainers to use"
@@ -285,6 +300,8 @@
 
 html: html-am
 
+html-am:
+
 info: info-am
 
 info-am:
@@ -293,18 +310,28 @@
 
 install-dvi: install-dvi-am
 
+install-dvi-am:
+
 install-exec-am:
 
 install-html: install-html-am
 
+install-html-am:
+
 install-info: install-info-am
 
+install-info-am:
+
 install-man:
 
 install-pdf: install-pdf-am
 
+install-pdf-am:
+
 install-ps: install-ps-am
 
+install-ps-am:
+
 installcheck-am:
 
 maintainer-clean: maintainer-clean-am
@@ -338,6 +365,7 @@
 	maintainer-clean-generic mostlyclean mostlyclean-generic \
 	mostlyclean-libtool pdf pdf-am ps ps-am uninstall uninstall-am
 
+
 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 # Otherwise a system limit (for SysV at least) may be exceeded.
 .NOEXPORT:
--- ode-0.11.orig/tests/Makefile.in
+++ ode-0.11/tests/Makefile.in
@@ -1,8 +1,9 @@
-# Makefile.in generated by automake 1.10.1 from Makefile.am.
+# Makefile.in generated by automake 1.11 from Makefile.am.
 # @configure_input@
 
 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
+# Inc.
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -15,8 +16,9 @@
 @SET_MAKE@
 VPATH = @srcdir@
 pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
 install_sh_DATA = $(install_sh) -c -m 644
 install_sh_PROGRAM = $(install_sh) -c
@@ -42,6 +44,7 @@
 mkinstalldirs = $(install_sh) -d
 CONFIG_HEADER = $(top_builddir)/ode/src/config.h
 CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
 am_tests_OBJECTS = main.$(OBJEXT) joint.$(OBJEXT) odemath.$(OBJEXT) \
 	collision.$(OBJEXT) ball.$(OBJEXT) fixed.$(OBJEXT) \
 	hinge.$(OBJEXT) hinge2.$(OBJEXT) piston.$(OBJEXT) pr.$(OBJEXT) \
@@ -53,6 +56,7 @@
 DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/ode/src
 depcomp = $(SHELL) $(top_srcdir)/depcomp
 am__depfiles_maybe = depfiles
+am__mv = mv -f
 CXXCOMPILE = $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
 	$(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS)
 LTCXXCOMPILE = $(LIBTOOL) --tag=CXX $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
@@ -73,10 +77,40 @@
 	ps-recursive uninstall-recursive
 RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
   distclean-recursive maintainer-clean-recursive
+AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
+	$(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
+	distdir
 ETAGS = etags
 CTAGS = ctags
+am__tty_colors = \
+red=; grn=; lgn=; blu=; std=
 DIST_SUBDIRS = $(SUBDIRS)
 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+am__relativize = \
+  dir0=`pwd`; \
+  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
+  sed_rest='s,^[^/]*/*,,'; \
+  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
+  sed_butlast='s,/*[^/]*$$,,'; \
+  while test -n "$$dir1"; do \
+    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
+    if test "$$first" != "."; then \
+      if test "$$first" = ".."; then \
+        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
+        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
+      else \
+        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
+        if test "$$first2" = "$$first"; then \
+          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
+        else \
+          dir2="../$$dir2"; \
+        fi; \
+        dir0="$$dir0"/"$$first"; \
+      fi; \
+    fi; \
+    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
+  done; \
+  reldir="$$dir2"
 ACLOCAL = @ACLOCAL@
 ALLOCA = @ALLOCA@
 AMTAR = @AMTAR@
@@ -100,15 +134,14 @@
 DEPDIR = @DEPDIR@
 DLLTOOL = @DLLTOOL@
 DSYMUTIL = @DSYMUTIL@
-ECHO = @ECHO@
+DUMPBIN = @DUMPBIN@
 ECHO_C = @ECHO_C@
 ECHO_N = @ECHO_N@
 ECHO_T = @ECHO_T@
 EGREP = @EGREP@
 EXEEXT = @EXEEXT@
 EXTRA_LIBTOOL_LDFLAGS = @EXTRA_LIBTOOL_LDFLAGS@
-F77 = @F77@
-FFLAGS = @FFLAGS@
+FGREP = @FGREP@
 GL_LIBS = @GL_LIBS@
 GREP = @GREP@
 INSTALL = @INSTALL@
@@ -116,26 +149,32 @@
 INSTALL_PROGRAM = @INSTALL_PROGRAM@
 INSTALL_SCRIPT = @INSTALL_SCRIPT@
 INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LD = @LD@
 LDFLAGS = @LDFLAGS@
 LIBOBJS = @LIBOBJS@
 LIBS = @LIBS@
 LIBSTDCXX = @LIBSTDCXX@
 LIBTOOL = @LIBTOOL@
+LIPO = @LIPO@
 LN_S = @LN_S@
 LTLIBOBJS = @LTLIBOBJS@
 MAKEINFO = @MAKEINFO@
 MKDIR_P = @MKDIR_P@
+NM = @NM@
 NMEDIT = @NMEDIT@
 OBJDUMP = @OBJDUMP@
 OBJEXT = @OBJEXT@
 ODE_PRECISION = @ODE_PRECISION@
 ODE_RELEASE = @ODE_RELEASE@
 ODE_VERSION_INFO = @ODE_VERSION_INFO@
+OTOOL = @OTOOL@
+OTOOL64 = @OTOOL64@
 PACKAGE = @PACKAGE@
 PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
 PACKAGE_NAME = @PACKAGE_NAME@
 PACKAGE_STRING = @PACKAGE_STRING@
 PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
 PACKAGE_VERSION = @PACKAGE_VERSION@
 PATH_SEPARATOR = @PATH_SEPARATOR@
 RANLIB = @RANLIB@
@@ -156,7 +195,7 @@
 abs_top_srcdir = @abs_top_srcdir@
 ac_ct_CC = @ac_ct_CC@
 ac_ct_CXX = @ac_ct_CXX@
-ac_ct_F77 = @ac_ct_F77@
+ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
 ac_ct_WINDRES = @ac_ct_WINDRES@
 am__include = @am__include@
 am__leading_dot = @am__leading_dot@
@@ -188,6 +227,7 @@
 libexecdir = @libexecdir@
 localedir = @localedir@
 localstatedir = @localstatedir@
+lt_ECHO = @lt_ECHO@
 mandir = @mandir@
 mkdir_p = @mkdir_p@
 oldincludedir = @oldincludedir@
@@ -231,14 +271,14 @@
 	@for dep in $?; do \
 	  case '$(am__configure_deps)' in \
 	    *$$dep*) \
-	      cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
-		&& exit 0; \
+	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+	        && { if test -f $@; then exit 0; else break; fi; }; \
 	      exit 1;; \
 	  esac; \
 	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign  tests/Makefile'; \
-	cd $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign  tests/Makefile
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign tests/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign tests/Makefile
 .PRECIOUS: Makefile
 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 	@case '$?' in \
@@ -256,13 +296,16 @@
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 $(ACLOCAL_M4):  $(am__aclocal_m4_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
 
 clean-checkPROGRAMS:
-	@list='$(check_PROGRAMS)'; for p in $$list; do \
-	  f=`echo $$p|sed 's/$(EXEEXT)$$//'`; \
-	  echo " rm -f $$p $$f"; \
-	  rm -f $$p $$f ; \
-	done
+	@list='$(check_PROGRAMS)'; test -n "$$list" || exit 0; \
+	echo " rm -f" $$list; \
+	rm -f $$list || exit $$?; \
+	test -n "$(EXEEXT)" || exit 0; \
+	list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
+	echo " rm -f" $$list; \
+	rm -f $$list
 tests$(EXEEXT): $(tests_OBJECTS) $(tests_DEPENDENCIES) 
 	@rm -f tests$(EXEEXT)
 	$(CXXLINK) $(tests_OBJECTS) $(tests_LDADD) $(LIBS)
@@ -289,147 +332,147 @@
 
 .cpp.o:
 @am__fastdepCXX_TRUE@	$(CXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCXX_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCXX_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCXX_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCXX_FALSE@	$(CXXCOMPILE) -c -o $@ $<
 
 .cpp.obj:
 @am__fastdepCXX_TRUE@	$(CXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
-@am__fastdepCXX_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCXX_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCXX_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCXX_FALSE@	$(CXXCOMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
 
 .cpp.lo:
 @am__fastdepCXX_TRUE@	$(LTCXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCXX_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
+@am__fastdepCXX_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
 @AMDEP_TRUE@@am__fastdepCXX_FALSE@	source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCXX_FALSE@	$(LTCXXCOMPILE) -c -o $@ $<
 
 ball.o: joints/ball.cpp
 @am__fastdepCXX_TRUE@	$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT ball.o -MD -MP -MF $(DEPDIR)/ball.Tpo -c -o ball.o `test -f 'joints/ball.cpp' || echo '$(srcdir)/'`joints/ball.cpp
-@am__fastdepCXX_TRUE@	mv -f $(DEPDIR)/ball.Tpo $(DEPDIR)/ball.Po
+@am__fastdepCXX_TRUE@	$(am__mv) $(DEPDIR)/ball.Tpo $(DEPDIR)/ball.Po
 @AMDEP_TRUE@@am__fastdepCXX_FALSE@	source='joints/ball.cpp' object='ball.o' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCXX_FALSE@	$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o ball.o `test -f 'joints/ball.cpp' || echo '$(srcdir)/'`joints/ball.cpp
 
 ball.obj: joints/ball.cpp
 @am__fastdepCXX_TRUE@	$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT ball.obj -MD -MP -MF $(DEPDIR)/ball.Tpo -c -o ball.obj `if test -f 'joints/ball.cpp'; then $(CYGPATH_W) 'joints/ball.cpp'; else $(CYGPATH_W) '$(srcdir)/joints/ball.cpp'; fi`
-@am__fastdepCXX_TRUE@	mv -f $(DEPDIR)/ball.Tpo $(DEPDIR)/ball.Po
+@am__fastdepCXX_TRUE@	$(am__mv) $(DEPDIR)/ball.Tpo $(DEPDIR)/ball.Po
 @AMDEP_TRUE@@am__fastdepCXX_FALSE@	source='joints/ball.cpp' object='ball.obj' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCXX_FALSE@	$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o ball.obj `if test -f 'joints/ball.cpp'; then $(CYGPATH_W) 'joints/ball.cpp'; else $(CYGPATH_W) '$(srcdir)/joints/ball.cpp'; fi`
 
 fixed.o: joints/fixed.cpp
 @am__fastdepCXX_TRUE@	$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT fixed.o -MD -MP -MF $(DEPDIR)/fixed.Tpo -c -o fixed.o `test -f 'joints/fixed.cpp' || echo '$(srcdir)/'`joints/fixed.cpp
-@am__fastdepCXX_TRUE@	mv -f $(DEPDIR)/fixed.Tpo $(DEPDIR)/fixed.Po
+@am__fastdepCXX_TRUE@	$(am__mv) $(DEPDIR)/fixed.Tpo $(DEPDIR)/fixed.Po
 @AMDEP_TRUE@@am__fastdepCXX_FALSE@	source='joints/fixed.cpp' object='fixed.o' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCXX_FALSE@	$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o fixed.o `test -f 'joints/fixed.cpp' || echo '$(srcdir)/'`joints/fixed.cpp
 
 fixed.obj: joints/fixed.cpp
 @am__fastdepCXX_TRUE@	$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT fixed.obj -MD -MP -MF $(DEPDIR)/fixed.Tpo -c -o fixed.obj `if test -f 'joints/fixed.cpp'; then $(CYGPATH_W) 'joints/fixed.cpp'; else $(CYGPATH_W) '$(srcdir)/joints/fixed.cpp'; fi`
-@am__fastdepCXX_TRUE@	mv -f $(DEPDIR)/fixed.Tpo $(DEPDIR)/fixed.Po
+@am__fastdepCXX_TRUE@	$(am__mv) $(DEPDIR)/fixed.Tpo $(DEPDIR)/fixed.Po
 @AMDEP_TRUE@@am__fastdepCXX_FALSE@	source='joints/fixed.cpp' object='fixed.obj' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCXX_FALSE@	$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o fixed.obj `if test -f 'joints/fixed.cpp'; then $(CYGPATH_W) 'joints/fixed.cpp'; else $(CYGPATH_W) '$(srcdir)/joints/fixed.cpp'; fi`
 
 hinge.o: joints/hinge.cpp
 @am__fastdepCXX_TRUE@	$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT hinge.o -MD -MP -MF $(DEPDIR)/hinge.Tpo -c -o hinge.o `test -f 'joints/hinge.cpp' || echo '$(srcdir)/'`joints/hinge.cpp
-@am__fastdepCXX_TRUE@	mv -f $(DEPDIR)/hinge.Tpo $(DEPDIR)/hinge.Po
+@am__fastdepCXX_TRUE@	$(am__mv) $(DEPDIR)/hinge.Tpo $(DEPDIR)/hinge.Po
 @AMDEP_TRUE@@am__fastdepCXX_FALSE@	source='joints/hinge.cpp' object='hinge.o' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCXX_FALSE@	$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o hinge.o `test -f 'joints/hinge.cpp' || echo '$(srcdir)/'`joints/hinge.cpp
 
 hinge.obj: joints/hinge.cpp
 @am__fastdepCXX_TRUE@	$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT hinge.obj -MD -MP -MF $(DEPDIR)/hinge.Tpo -c -o hinge.obj `if test -f 'joints/hinge.cpp'; then $(CYGPATH_W) 'joints/hinge.cpp'; else $(CYGPATH_W) '$(srcdir)/joints/hinge.cpp'; fi`
-@am__fastdepCXX_TRUE@	mv -f $(DEPDIR)/hinge.Tpo $(DEPDIR)/hinge.Po
+@am__fastdepCXX_TRUE@	$(am__mv) $(DEPDIR)/hinge.Tpo $(DEPDIR)/hinge.Po
 @AMDEP_TRUE@@am__fastdepCXX_FALSE@	source='joints/hinge.cpp' object='hinge.obj' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCXX_FALSE@	$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o hinge.obj `if test -f 'joints/hinge.cpp'; then $(CYGPATH_W) 'joints/hinge.cpp'; else $(CYGPATH_W) '$(srcdir)/joints/hinge.cpp'; fi`
 
 hinge2.o: joints/hinge2.cpp
 @am__fastdepCXX_TRUE@	$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT hinge2.o -MD -MP -MF $(DEPDIR)/hinge2.Tpo -c -o hinge2.o `test -f 'joints/hinge2.cpp' || echo '$(srcdir)/'`joints/hinge2.cpp
-@am__fastdepCXX_TRUE@	mv -f $(DEPDIR)/hinge2.Tpo $(DEPDIR)/hinge2.Po
+@am__fastdepCXX_TRUE@	$(am__mv) $(DEPDIR)/hinge2.Tpo $(DEPDIR)/hinge2.Po
 @AMDEP_TRUE@@am__fastdepCXX_FALSE@	source='joints/hinge2.cpp' object='hinge2.o' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCXX_FALSE@	$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o hinge2.o `test -f 'joints/hinge2.cpp' || echo '$(srcdir)/'`joints/hinge2.cpp
 
 hinge2.obj: joints/hinge2.cpp
 @am__fastdepCXX_TRUE@	$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT hinge2.obj -MD -MP -MF $(DEPDIR)/hinge2.Tpo -c -o hinge2.obj `if test -f 'joints/hinge2.cpp'; then $(CYGPATH_W) 'joints/hinge2.cpp'; else $(CYGPATH_W) '$(srcdir)/joints/hinge2.cpp'; fi`
-@am__fastdepCXX_TRUE@	mv -f $(DEPDIR)/hinge2.Tpo $(DEPDIR)/hinge2.Po
+@am__fastdepCXX_TRUE@	$(am__mv) $(DEPDIR)/hinge2.Tpo $(DEPDIR)/hinge2.Po
 @AMDEP_TRUE@@am__fastdepCXX_FALSE@	source='joints/hinge2.cpp' object='hinge2.obj' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCXX_FALSE@	$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o hinge2.obj `if test -f 'joints/hinge2.cpp'; then $(CYGPATH_W) 'joints/hinge2.cpp'; else $(CYGPATH_W) '$(srcdir)/joints/hinge2.cpp'; fi`
 
 piston.o: joints/piston.cpp
 @am__fastdepCXX_TRUE@	$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT piston.o -MD -MP -MF $(DEPDIR)/piston.Tpo -c -o piston.o `test -f 'joints/piston.cpp' || echo '$(srcdir)/'`joints/piston.cpp
-@am__fastdepCXX_TRUE@	mv -f $(DEPDIR)/piston.Tpo $(DEPDIR)/piston.Po
+@am__fastdepCXX_TRUE@	$(am__mv) $(DEPDIR)/piston.Tpo $(DEPDIR)/piston.Po
 @AMDEP_TRUE@@am__fastdepCXX_FALSE@	source='joints/piston.cpp' object='piston.o' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCXX_FALSE@	$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o piston.o `test -f 'joints/piston.cpp' || echo '$(srcdir)/'`joints/piston.cpp
 
 piston.obj: joints/piston.cpp
 @am__fastdepCXX_TRUE@	$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT piston.obj -MD -MP -MF $(DEPDIR)/piston.Tpo -c -o piston.obj `if test -f 'joints/piston.cpp'; then $(CYGPATH_W) 'joints/piston.cpp'; else $(CYGPATH_W) '$(srcdir)/joints/piston.cpp'; fi`
-@am__fastdepCXX_TRUE@	mv -f $(DEPDIR)/piston.Tpo $(DEPDIR)/piston.Po
+@am__fastdepCXX_TRUE@	$(am__mv) $(DEPDIR)/piston.Tpo $(DEPDIR)/piston.Po
 @AMDEP_TRUE@@am__fastdepCXX_FALSE@	source='joints/piston.cpp' object='piston.obj' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCXX_FALSE@	$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o piston.obj `if test -f 'joints/piston.cpp'; then $(CYGPATH_W) 'joints/piston.cpp'; else $(CYGPATH_W) '$(srcdir)/joints/piston.cpp'; fi`
 
 pr.o: joints/pr.cpp
 @am__fastdepCXX_TRUE@	$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT pr.o -MD -MP -MF $(DEPDIR)/pr.Tpo -c -o pr.o `test -f 'joints/pr.cpp' || echo '$(srcdir)/'`joints/pr.cpp
-@am__fastdepCXX_TRUE@	mv -f $(DEPDIR)/pr.Tpo $(DEPDIR)/pr.Po
+@am__fastdepCXX_TRUE@	$(am__mv) $(DEPDIR)/pr.Tpo $(DEPDIR)/pr.Po
 @AMDEP_TRUE@@am__fastdepCXX_FALSE@	source='joints/pr.cpp' object='pr.o' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCXX_FALSE@	$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o pr.o `test -f 'joints/pr.cpp' || echo '$(srcdir)/'`joints/pr.cpp
 
 pr.obj: joints/pr.cpp
 @am__fastdepCXX_TRUE@	$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT pr.obj -MD -MP -MF $(DEPDIR)/pr.Tpo -c -o pr.obj `if test -f 'joints/pr.cpp'; then $(CYGPATH_W) 'joints/pr.cpp'; else $(CYGPATH_W) '$(srcdir)/joints/pr.cpp'; fi`
-@am__fastdepCXX_TRUE@	mv -f $(DEPDIR)/pr.Tpo $(DEPDIR)/pr.Po
+@am__fastdepCXX_TRUE@	$(am__mv) $(DEPDIR)/pr.Tpo $(DEPDIR)/pr.Po
 @AMDEP_TRUE@@am__fastdepCXX_FALSE@	source='joints/pr.cpp' object='pr.obj' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCXX_FALSE@	$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o pr.obj `if test -f 'joints/pr.cpp'; then $(CYGPATH_W) 'joints/pr.cpp'; else $(CYGPATH_W) '$(srcdir)/joints/pr.cpp'; fi`
 
 pu.o: joints/pu.cpp
 @am__fastdepCXX_TRUE@	$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT pu.o -MD -MP -MF $(DEPDIR)/pu.Tpo -c -o pu.o `test -f 'joints/pu.cpp' || echo '$(srcdir)/'`joints/pu.cpp
-@am__fastdepCXX_TRUE@	mv -f $(DEPDIR)/pu.Tpo $(DEPDIR)/pu.Po
+@am__fastdepCXX_TRUE@	$(am__mv) $(DEPDIR)/pu.Tpo $(DEPDIR)/pu.Po
 @AMDEP_TRUE@@am__fastdepCXX_FALSE@	source='joints/pu.cpp' object='pu.o' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCXX_FALSE@	$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o pu.o `test -f 'joints/pu.cpp' || echo '$(srcdir)/'`joints/pu.cpp
 
 pu.obj: joints/pu.cpp
 @am__fastdepCXX_TRUE@	$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT pu.obj -MD -MP -MF $(DEPDIR)/pu.Tpo -c -o pu.obj `if test -f 'joints/pu.cpp'; then $(CYGPATH_W) 'joints/pu.cpp'; else $(CYGPATH_W) '$(srcdir)/joints/pu.cpp'; fi`
-@am__fastdepCXX_TRUE@	mv -f $(DEPDIR)/pu.Tpo $(DEPDIR)/pu.Po
+@am__fastdepCXX_TRUE@	$(am__mv) $(DEPDIR)/pu.Tpo $(DEPDIR)/pu.Po
 @AMDEP_TRUE@@am__fastdepCXX_FALSE@	source='joints/pu.cpp' object='pu.obj' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCXX_FALSE@	$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o pu.obj `if test -f 'joints/pu.cpp'; then $(CYGPATH_W) 'joints/pu.cpp'; else $(CYGPATH_W) '$(srcdir)/joints/pu.cpp'; fi`
 
 slider.o: joints/slider.cpp
 @am__fastdepCXX_TRUE@	$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT slider.o -MD -MP -MF $(DEPDIR)/slider.Tpo -c -o slider.o `test -f 'joints/slider.cpp' || echo '$(srcdir)/'`joints/slider.cpp
-@am__fastdepCXX_TRUE@	mv -f $(DEPDIR)/slider.Tpo $(DEPDIR)/slider.Po
+@am__fastdepCXX_TRUE@	$(am__mv) $(DEPDIR)/slider.Tpo $(DEPDIR)/slider.Po
 @AMDEP_TRUE@@am__fastdepCXX_FALSE@	source='joints/slider.cpp' object='slider.o' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCXX_FALSE@	$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o slider.o `test -f 'joints/slider.cpp' || echo '$(srcdir)/'`joints/slider.cpp
 
 slider.obj: joints/slider.cpp
 @am__fastdepCXX_TRUE@	$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT slider.obj -MD -MP -MF $(DEPDIR)/slider.Tpo -c -o slider.obj `if test -f 'joints/slider.cpp'; then $(CYGPATH_W) 'joints/slider.cpp'; else $(CYGPATH_W) '$(srcdir)/joints/slider.cpp'; fi`
-@am__fastdepCXX_TRUE@	mv -f $(DEPDIR)/slider.Tpo $(DEPDIR)/slider.Po
+@am__fastdepCXX_TRUE@	$(am__mv) $(DEPDIR)/slider.Tpo $(DEPDIR)/slider.Po
 @AMDEP_TRUE@@am__fastdepCXX_FALSE@	source='joints/slider.cpp' object='slider.obj' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCXX_FALSE@	$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o slider.obj `if test -f 'joints/slider.cpp'; then $(CYGPATH_W) 'joints/slider.cpp'; else $(CYGPATH_W) '$(srcdir)/joints/slider.cpp'; fi`
 
 universal.o: joints/universal.cpp
 @am__fastdepCXX_TRUE@	$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT universal.o -MD -MP -MF $(DEPDIR)/universal.Tpo -c -o universal.o `test -f 'joints/universal.cpp' || echo '$(srcdir)/'`joints/universal.cpp
-@am__fastdepCXX_TRUE@	mv -f $(DEPDIR)/universal.Tpo $(DEPDIR)/universal.Po
+@am__fastdepCXX_TRUE@	$(am__mv) $(DEPDIR)/universal.Tpo $(DEPDIR)/universal.Po
 @AMDEP_TRUE@@am__fastdepCXX_FALSE@	source='joints/universal.cpp' object='universal.o' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCXX_FALSE@	$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o universal.o `test -f 'joints/universal.cpp' || echo '$(srcdir)/'`joints/universal.cpp
 
 universal.obj: joints/universal.cpp
 @am__fastdepCXX_TRUE@	$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT universal.obj -MD -MP -MF $(DEPDIR)/universal.Tpo -c -o universal.obj `if test -f 'joints/universal.cpp'; then $(CYGPATH_W) 'joints/universal.cpp'; else $(CYGPATH_W) '$(srcdir)/joints/universal.cpp'; fi`
-@am__fastdepCXX_TRUE@	mv -f $(DEPDIR)/universal.Tpo $(DEPDIR)/universal.Po
+@am__fastdepCXX_TRUE@	$(am__mv) $(DEPDIR)/universal.Tpo $(DEPDIR)/universal.Po
 @AMDEP_TRUE@@am__fastdepCXX_FALSE@	source='joints/universal.cpp' object='universal.obj' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCXX_FALSE@	$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o universal.obj `if test -f 'joints/universal.cpp'; then $(CYGPATH_W) 'joints/universal.cpp'; else $(CYGPATH_W) '$(srcdir)/joints/universal.cpp'; fi`
@@ -464,7 +507,7 @@
 	  else \
 	    local_target="$$target"; \
 	  fi; \
-	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
 	  || eval $$failcom; \
 	done; \
 	if test "$$dot_seen" = "no"; then \
@@ -498,16 +541,16 @@
 	  else \
 	    local_target="$$target"; \
 	  fi; \
-	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
 	  || eval $$failcom; \
 	done && test -z "$$fail"
 tags-recursive:
 	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
+	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
 	done
 ctags-recursive:
 	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
+	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
 	done
 
 ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
@@ -515,14 +558,14 @@
 	unique=`for i in $$list; do \
 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 	  done | \
-	  $(AWK) '{ files[$$0] = 1; nonemtpy = 1; } \
+	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
 	mkid -fID $$unique
 tags: TAGS
 
 TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
+	set x; \
 	here=`pwd`; \
 	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
 	  include_option=--etags-include; \
@@ -534,7 +577,7 @@
 	list='$(SUBDIRS)'; for subdir in $$list; do \
 	  if test "$$subdir" = .; then :; else \
 	    test ! -f $$subdir/TAGS || \
-	      tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
+	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
 	  fi; \
 	done; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
@@ -543,37 +586,43 @@
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
 	  test -n "$$unique" || unique=$$empty_fix; \
-	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	    $$tags $$unique; \
+	  if test $$# -gt 0; then \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
 	fi
 ctags: CTAGS
 CTAGS: ctags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	test -z "$(CTAGS_ARGS)$$tags$$unique" \
+	test -z "$(CTAGS_ARGS)$$unique" \
 	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
-	     $$tags $$unique
+	     $$unique
 
 GTAGS:
 	here=`$(am__cd) $(top_builddir) && pwd` \
-	  && cd $(top_srcdir) \
-	  && gtags -i $(GTAGS_ARGS) $$here
+	  && $(am__cd) $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) "$$here"
 
 distclean-tags:
 	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
 
 check-TESTS: $(TESTS)
-	@failed=0; all=0; xfail=0; xpass=0; skip=0; ws='[	 ]'; \
+	@failed=0; all=0; xfail=0; xpass=0; skip=0; \
 	srcdir=$(srcdir); export srcdir; \
 	list=' $(TESTS) '; \
+	$(am__tty_colors); \
 	if test -n "$$list"; then \
 	  for tst in $$list; do \
 	    if test -f ./$$tst; then dir=./; \
@@ -582,49 +631,63 @@
 	    if $(TESTS_ENVIRONMENT) $${dir}$$tst; then \
 	      all=`expr $$all + 1`; \
 	      case " $(XFAIL_TESTS) " in \
-	      *$$ws$$tst$$ws*) \
+	      *[\ \	]$$tst[\ \	]*) \
 		xpass=`expr $$xpass + 1`; \
 		failed=`expr $$failed + 1`; \
-		echo "XPASS: $$tst"; \
+		col=$$red; res=XPASS; \
 	      ;; \
 	      *) \
-		echo "PASS: $$tst"; \
+		col=$$grn; res=PASS; \
 	      ;; \
 	      esac; \
 	    elif test $$? -ne 77; then \
 	      all=`expr $$all + 1`; \
 	      case " $(XFAIL_TESTS) " in \
-	      *$$ws$$tst$$ws*) \
+	      *[\ \	]$$tst[\ \	]*) \
 		xfail=`expr $$xfail + 1`; \
-		echo "XFAIL: $$tst"; \
+		col=$$lgn; res=XFAIL; \
 	      ;; \
 	      *) \
 		failed=`expr $$failed + 1`; \
-		echo "FAIL: $$tst"; \
+		col=$$red; res=FAIL; \
 	      ;; \
 	      esac; \
 	    else \
 	      skip=`expr $$skip + 1`; \
-	      echo "SKIP: $$tst"; \
+	      col=$$blu; res=SKIP; \
 	    fi; \
+	    echo "$${col}$$res$${std}: $$tst"; \
 	  done; \
+	  if test "$$all" -eq 1; then \
+	    tests="test"; \
+	    All=""; \
+	  else \
+	    tests="tests"; \
+	    All="All "; \
+	  fi; \
 	  if test "$$failed" -eq 0; then \
 	    if test "$$xfail" -eq 0; then \
-	      banner="All $$all tests passed"; \
+	      banner="$$All$$all $$tests passed"; \
 	    else \
-	      banner="All $$all tests behaved as expected ($$xfail expected failures)"; \
+	      if test "$$xfail" -eq 1; then failures=failure; else failures=failures; fi; \
+	      banner="$$All$$all $$tests behaved as expected ($$xfail expected $$failures)"; \
 	    fi; \
 	  else \
 	    if test "$$xpass" -eq 0; then \
-	      banner="$$failed of $$all tests failed"; \
+	      banner="$$failed of $$all $$tests failed"; \
 	    else \
-	      banner="$$failed of $$all tests did not behave as expected ($$xpass unexpected passes)"; \
+	      if test "$$xpass" -eq 1; then passes=pass; else passes=passes; fi; \
+	      banner="$$failed of $$all $$tests did not behave as expected ($$xpass unexpected $$passes)"; \
 	    fi; \
 	  fi; \
 	  dashes="$$banner"; \
 	  skipped=""; \
 	  if test "$$skip" -ne 0; then \
-	    skipped="($$skip tests were not run)"; \
+	    if test "$$skip" -eq 1; then \
+	      skipped="($$skip test was not run)"; \
+	    else \
+	      skipped="($$skip tests were not run)"; \
+	    fi; \
 	    test `echo "$$skipped" | wc -c` -le `echo "$$banner" | wc -c` || \
 	      dashes="$$skipped"; \
 	  fi; \
@@ -635,11 +698,15 @@
 	      dashes="$$report"; \
 	  fi; \
 	  dashes=`echo "$$dashes" | sed s/./=/g`; \
-	  echo "$$dashes"; \
+	  if test "$$failed" -eq 0; then \
+	    echo "$$grn$$dashes"; \
+	  else \
+	    echo "$$red$$dashes"; \
+	  fi; \
 	  echo "$$banner"; \
 	  test -z "$$skipped" || echo "$$skipped"; \
 	  test -z "$$report" || echo "$$report"; \
-	  echo "$$dashes"; \
+	  echo "$$dashes$$std"; \
 	  test "$$failed" -eq 0; \
 	else :; fi
 
@@ -659,29 +726,44 @@
 	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
 	  if test -d $$d/$$file; then \
 	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
 	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 	    fi; \
-	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
 	  else \
-	    test -f $(distdir)/$$file \
-	    || cp -p $$d/$$file $(distdir)/$$file \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
 	    || exit 1; \
 	  fi; \
 	done
-	list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
 	  if test "$$subdir" = .; then :; else \
 	    test -d "$(distdir)/$$subdir" \
 	    || $(MKDIR_P) "$(distdir)/$$subdir" \
 	    || exit 1; \
-	    distdir=`$(am__cd) $(distdir) && pwd`; \
-	    top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
-	    (cd $$subdir && \
+	  fi; \
+	done
+	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+	  if test "$$subdir" = .; then :; else \
+	    dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
+	    $(am__relativize); \
+	    new_distdir=$$reldir; \
+	    dir1=$$subdir; dir2="$(top_distdir)"; \
+	    $(am__relativize); \
+	    new_top_distdir=$$reldir; \
+	    echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
+	    echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
+	    ($(am__cd) $$subdir && \
 	      $(MAKE) $(AM_MAKEFLAGS) \
-	        top_distdir="$$top_distdir" \
-	        distdir="$$distdir/$$subdir" \
+	        top_distdir="$$new_top_distdir" \
+	        distdir="$$new_distdir" \
 		am__remove_distdir=: \
 		am__skip_length_check=: \
+		am__skip_mode_fix=: \
 	        distdir) \
 	      || exit 1; \
 	  fi; \
@@ -713,6 +795,7 @@
 
 distclean-generic:
 	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
 
 maintainer-clean-generic:
 	@echo "This command is intended for maintainers to use"
@@ -734,6 +817,8 @@
 
 html: html-recursive
 
+html-am:
+
 info: info-recursive
 
 info-am:
@@ -742,18 +827,28 @@
 
 install-dvi: install-dvi-recursive
 
+install-dvi-am:
+
 install-exec-am:
 
 install-html: install-html-recursive
 
+install-html-am:
+
 install-info: install-info-recursive
 
+install-info-am:
+
 install-man:
 
 install-pdf: install-pdf-recursive
 
+install-pdf-am:
+
 install-ps: install-ps-recursive
 
+install-ps-am:
+
 installcheck-am:
 
 maintainer-clean: maintainer-clean-recursive
@@ -776,8 +871,8 @@
 
 uninstall-am:
 
-.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) install-am \
-	install-strip
+.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) check-am \
+	ctags-recursive install-am install-strip tags-recursive
 
 .PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
 	all all-am check check-TESTS check-am clean \
@@ -794,6 +889,7 @@
 	mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
 	tags tags-recursive uninstall uninstall-am
 
+
 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 # Otherwise a system limit (for SysV at least) may be exceeded.
 .NOEXPORT:
--- ode-0.11.orig/tests/UnitTest++/Makefile.in
+++ ode-0.11/tests/UnitTest++/Makefile.in
@@ -1,8 +1,9 @@
-# Makefile.in generated by automake 1.10.1 from Makefile.am.
+# Makefile.in generated by automake 1.11 from Makefile.am.
 # @configure_input@
 
 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
+# Inc.
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -17,8 +18,9 @@
 # Makefile.am for UnitTest++
 VPATH = @srcdir@
 pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
 install_sh_DATA = $(install_sh) -c -m 644
 install_sh_PROGRAM = $(install_sh) -c
@@ -43,6 +45,7 @@
 mkinstalldirs = $(install_sh) -d
 CONFIG_HEADER = $(top_builddir)/ode/src/config.h
 CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
 SOURCES =
 DIST_SOURCES =
 RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
@@ -54,10 +57,38 @@
 	ps-recursive uninstall-recursive
 RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
   distclean-recursive maintainer-clean-recursive
+AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
+	$(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
+	distdir
 ETAGS = etags
 CTAGS = ctags
 DIST_SUBDIRS = $(SUBDIRS)
 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+am__relativize = \
+  dir0=`pwd`; \
+  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
+  sed_rest='s,^[^/]*/*,,'; \
+  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
+  sed_butlast='s,/*[^/]*$$,,'; \
+  while test -n "$$dir1"; do \
+    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
+    if test "$$first" != "."; then \
+      if test "$$first" = ".."; then \
+        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
+        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
+      else \
+        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
+        if test "$$first2" = "$$first"; then \
+          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
+        else \
+          dir2="../$$dir2"; \
+        fi; \
+        dir0="$$dir0"/"$$first"; \
+      fi; \
+    fi; \
+    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
+  done; \
+  reldir="$$dir2"
 ACLOCAL = @ACLOCAL@
 ALLOCA = @ALLOCA@
 AMTAR = @AMTAR@
@@ -81,15 +112,14 @@
 DEPDIR = @DEPDIR@
 DLLTOOL = @DLLTOOL@
 DSYMUTIL = @DSYMUTIL@
-ECHO = @ECHO@
+DUMPBIN = @DUMPBIN@
 ECHO_C = @ECHO_C@
 ECHO_N = @ECHO_N@
 ECHO_T = @ECHO_T@
 EGREP = @EGREP@
 EXEEXT = @EXEEXT@
 EXTRA_LIBTOOL_LDFLAGS = @EXTRA_LIBTOOL_LDFLAGS@
-F77 = @F77@
-FFLAGS = @FFLAGS@
+FGREP = @FGREP@
 GL_LIBS = @GL_LIBS@
 GREP = @GREP@
 INSTALL = @INSTALL@
@@ -97,26 +127,32 @@
 INSTALL_PROGRAM = @INSTALL_PROGRAM@
 INSTALL_SCRIPT = @INSTALL_SCRIPT@
 INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LD = @LD@
 LDFLAGS = @LDFLAGS@
 LIBOBJS = @LIBOBJS@
 LIBS = @LIBS@
 LIBSTDCXX = @LIBSTDCXX@
 LIBTOOL = @LIBTOOL@
+LIPO = @LIPO@
 LN_S = @LN_S@
 LTLIBOBJS = @LTLIBOBJS@
 MAKEINFO = @MAKEINFO@
 MKDIR_P = @MKDIR_P@
+NM = @NM@
 NMEDIT = @NMEDIT@
 OBJDUMP = @OBJDUMP@
 OBJEXT = @OBJEXT@
 ODE_PRECISION = @ODE_PRECISION@
 ODE_RELEASE = @ODE_RELEASE@
 ODE_VERSION_INFO = @ODE_VERSION_INFO@
+OTOOL = @OTOOL@
+OTOOL64 = @OTOOL64@
 PACKAGE = @PACKAGE@
 PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
 PACKAGE_NAME = @PACKAGE_NAME@
 PACKAGE_STRING = @PACKAGE_STRING@
 PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
 PACKAGE_VERSION = @PACKAGE_VERSION@
 PATH_SEPARATOR = @PATH_SEPARATOR@
 RANLIB = @RANLIB@
@@ -137,7 +173,7 @@
 abs_top_srcdir = @abs_top_srcdir@
 ac_ct_CC = @ac_ct_CC@
 ac_ct_CXX = @ac_ct_CXX@
-ac_ct_F77 = @ac_ct_F77@
+ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
 ac_ct_WINDRES = @ac_ct_WINDRES@
 am__include = @am__include@
 am__leading_dot = @am__leading_dot@
@@ -169,6 +205,7 @@
 libexecdir = @libexecdir@
 localedir = @localedir@
 localstatedir = @localstatedir@
+lt_ECHO = @lt_ECHO@
 mandir = @mandir@
 mkdir_p = @mkdir_p@
 oldincludedir = @oldincludedir@
@@ -194,14 +231,14 @@
 	@for dep in $?; do \
 	  case '$(am__configure_deps)' in \
 	    *$$dep*) \
-	      cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
-		&& exit 0; \
+	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+	        && { if test -f $@; then exit 0; else break; fi; }; \
 	      exit 1;; \
 	  esac; \
 	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign  tests/UnitTest++/Makefile'; \
-	cd $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign  tests/UnitTest++/Makefile
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign tests/UnitTest++/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign tests/UnitTest++/Makefile
 .PRECIOUS: Makefile
 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 	@case '$?' in \
@@ -219,6 +256,7 @@
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 $(ACLOCAL_M4):  $(am__aclocal_m4_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
 
 mostlyclean-libtool:
 	-rm -f *.lo
@@ -250,7 +288,7 @@
 	  else \
 	    local_target="$$target"; \
 	  fi; \
-	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
 	  || eval $$failcom; \
 	done; \
 	if test "$$dot_seen" = "no"; then \
@@ -284,16 +322,16 @@
 	  else \
 	    local_target="$$target"; \
 	  fi; \
-	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
 	  || eval $$failcom; \
 	done && test -z "$$fail"
 tags-recursive:
 	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
+	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
 	done
 ctags-recursive:
 	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
+	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
 	done
 
 ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
@@ -301,14 +339,14 @@
 	unique=`for i in $$list; do \
 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 	  done | \
-	  $(AWK) '{ files[$$0] = 1; nonemtpy = 1; } \
+	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
 	mkid -fID $$unique
 tags: TAGS
 
 TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
+	set x; \
 	here=`pwd`; \
 	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
 	  include_option=--etags-include; \
@@ -320,7 +358,7 @@
 	list='$(SUBDIRS)'; for subdir in $$list; do \
 	  if test "$$subdir" = .; then :; else \
 	    test ! -f $$subdir/TAGS || \
-	      tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
+	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
 	  fi; \
 	done; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
@@ -329,29 +367,34 @@
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
 	  test -n "$$unique" || unique=$$empty_fix; \
-	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	    $$tags $$unique; \
+	  if test $$# -gt 0; then \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
 	fi
 ctags: CTAGS
 CTAGS: ctags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	test -z "$(CTAGS_ARGS)$$tags$$unique" \
+	test -z "$(CTAGS_ARGS)$$unique" \
 	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
-	     $$tags $$unique
+	     $$unique
 
 GTAGS:
 	here=`$(am__cd) $(top_builddir) && pwd` \
-	  && cd $(top_srcdir) \
-	  && gtags -i $(GTAGS_ARGS) $$here
+	  && $(am__cd) $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) "$$here"
 
 distclean-tags:
 	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
@@ -372,29 +415,44 @@
 	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
 	  if test -d $$d/$$file; then \
 	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
 	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 	    fi; \
-	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
 	  else \
-	    test -f $(distdir)/$$file \
-	    || cp -p $$d/$$file $(distdir)/$$file \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
 	    || exit 1; \
 	  fi; \
 	done
-	list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
 	  if test "$$subdir" = .; then :; else \
 	    test -d "$(distdir)/$$subdir" \
 	    || $(MKDIR_P) "$(distdir)/$$subdir" \
 	    || exit 1; \
-	    distdir=`$(am__cd) $(distdir) && pwd`; \
-	    top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
-	    (cd $$subdir && \
+	  fi; \
+	done
+	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+	  if test "$$subdir" = .; then :; else \
+	    dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
+	    $(am__relativize); \
+	    new_distdir=$$reldir; \
+	    dir1=$$subdir; dir2="$(top_distdir)"; \
+	    $(am__relativize); \
+	    new_top_distdir=$$reldir; \
+	    echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
+	    echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
+	    ($(am__cd) $$subdir && \
 	      $(MAKE) $(AM_MAKEFLAGS) \
-	        top_distdir="$$top_distdir" \
-	        distdir="$$distdir/$$subdir" \
+	        top_distdir="$$new_top_distdir" \
+	        distdir="$$new_distdir" \
 		am__remove_distdir=: \
 		am__skip_length_check=: \
+		am__skip_mode_fix=: \
 	        distdir) \
 	      || exit 1; \
 	  fi; \
@@ -424,6 +482,7 @@
 
 distclean-generic:
 	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
 
 maintainer-clean-generic:
 	@echo "This command is intended for maintainers to use"
@@ -442,6 +501,8 @@
 
 html: html-recursive
 
+html-am:
+
 info: info-recursive
 
 info-am:
@@ -450,18 +511,28 @@
 
 install-dvi: install-dvi-recursive
 
+install-dvi-am:
+
 install-exec-am:
 
 install-html: install-html-recursive
 
+install-html-am:
+
 install-info: install-info-recursive
 
+install-info-am:
+
 install-man:
 
 install-pdf: install-pdf-recursive
 
+install-pdf-am:
+
 install-ps: install-ps-recursive
 
+install-ps-am:
+
 installcheck-am:
 
 maintainer-clean: maintainer-clean-recursive
@@ -482,8 +553,8 @@
 
 uninstall-am:
 
-.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) install-am \
-	install-strip
+.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) ctags-recursive \
+	install-am install-strip tags-recursive
 
 .PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
 	all all-am check check-am clean clean-generic clean-libtool \
@@ -499,6 +570,7 @@
 	mostlyclean-libtool pdf pdf-am ps ps-am tags tags-recursive \
 	uninstall uninstall-am
 
+
 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 # Otherwise a system limit (for SysV at least) may be exceeded.
 .NOEXPORT:
--- ode-0.11.orig/tests/UnitTest++/src/Makefile.in
+++ ode-0.11/tests/UnitTest++/src/Makefile.in
@@ -1,8 +1,9 @@
-# Makefile.in generated by automake 1.10.1 from Makefile.am.
+# Makefile.in generated by automake 1.11 from Makefile.am.
 # @configure_input@
 
 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
+# Inc.
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -15,8 +16,9 @@
 @SET_MAKE@
 VPATH = @srcdir@
 pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
 install_sh_DATA = $(install_sh) -c -m 644
 install_sh_PROGRAM = $(install_sh) -c
@@ -40,6 +42,7 @@
 mkinstalldirs = $(install_sh) -d
 CONFIG_HEADER = $(top_builddir)/ode/src/config.h
 CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
 @WIN32_FALSE@libunittestpp_la_DEPENDENCIES =  \
 @WIN32_FALSE@	$(builddir)/Posix/libhelper.la
 @WIN32_TRUE@libunittestpp_la_DEPENDENCIES =  \
@@ -54,6 +57,7 @@
 DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/ode/src
 depcomp = $(SHELL) $(top_srcdir)/depcomp
 am__depfiles_maybe = depfiles
+am__mv = mv -f
 CXXCOMPILE = $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
 	$(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS)
 LTCXXCOMPILE = $(LIBTOOL) --tag=CXX $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
@@ -83,10 +87,38 @@
 	ps-recursive uninstall-recursive
 RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
   distclean-recursive maintainer-clean-recursive
+AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
+	$(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
+	distdir
 ETAGS = etags
 CTAGS = ctags
 DIST_SUBDIRS = Posix Win32
 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+am__relativize = \
+  dir0=`pwd`; \
+  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
+  sed_rest='s,^[^/]*/*,,'; \
+  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
+  sed_butlast='s,/*[^/]*$$,,'; \
+  while test -n "$$dir1"; do \
+    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
+    if test "$$first" != "."; then \
+      if test "$$first" = ".."; then \
+        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
+        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
+      else \
+        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
+        if test "$$first2" = "$$first"; then \
+          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
+        else \
+          dir2="../$$dir2"; \
+        fi; \
+        dir0="$$dir0"/"$$first"; \
+      fi; \
+    fi; \
+    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
+  done; \
+  reldir="$$dir2"
 ACLOCAL = @ACLOCAL@
 ALLOCA = @ALLOCA@
 AMTAR = @AMTAR@
@@ -110,15 +142,14 @@
 DEPDIR = @DEPDIR@
 DLLTOOL = @DLLTOOL@
 DSYMUTIL = @DSYMUTIL@
-ECHO = @ECHO@
+DUMPBIN = @DUMPBIN@
 ECHO_C = @ECHO_C@
 ECHO_N = @ECHO_N@
 ECHO_T = @ECHO_T@
 EGREP = @EGREP@
 EXEEXT = @EXEEXT@
 EXTRA_LIBTOOL_LDFLAGS = @EXTRA_LIBTOOL_LDFLAGS@
-F77 = @F77@
-FFLAGS = @FFLAGS@
+FGREP = @FGREP@
 GL_LIBS = @GL_LIBS@
 GREP = @GREP@
 INSTALL = @INSTALL@
@@ -126,26 +157,32 @@
 INSTALL_PROGRAM = @INSTALL_PROGRAM@
 INSTALL_SCRIPT = @INSTALL_SCRIPT@
 INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LD = @LD@
 LDFLAGS = @LDFLAGS@
 LIBOBJS = @LIBOBJS@
 LIBS = @LIBS@
 LIBSTDCXX = @LIBSTDCXX@
 LIBTOOL = @LIBTOOL@
+LIPO = @LIPO@
 LN_S = @LN_S@
 LTLIBOBJS = @LTLIBOBJS@
 MAKEINFO = @MAKEINFO@
 MKDIR_P = @MKDIR_P@
+NM = @NM@
 NMEDIT = @NMEDIT@
 OBJDUMP = @OBJDUMP@
 OBJEXT = @OBJEXT@
 ODE_PRECISION = @ODE_PRECISION@
 ODE_RELEASE = @ODE_RELEASE@
 ODE_VERSION_INFO = @ODE_VERSION_INFO@
+OTOOL = @OTOOL@
+OTOOL64 = @OTOOL64@
 PACKAGE = @PACKAGE@
 PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
 PACKAGE_NAME = @PACKAGE_NAME@
 PACKAGE_STRING = @PACKAGE_STRING@
 PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
 PACKAGE_VERSION = @PACKAGE_VERSION@
 PATH_SEPARATOR = @PATH_SEPARATOR@
 RANLIB = @RANLIB@
@@ -166,7 +203,7 @@
 abs_top_srcdir = @abs_top_srcdir@
 ac_ct_CC = @ac_ct_CC@
 ac_ct_CXX = @ac_ct_CXX@
-ac_ct_F77 = @ac_ct_F77@
+ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
 ac_ct_WINDRES = @ac_ct_WINDRES@
 am__include = @am__include@
 am__leading_dot = @am__leading_dot@
@@ -198,6 +235,7 @@
 libexecdir = @libexecdir@
 localedir = @localedir@
 localstatedir = @localstatedir@
+lt_ECHO = @lt_ECHO@
 mandir = @mandir@
 mkdir_p = @mkdir_p@
 oldincludedir = @oldincludedir@
@@ -246,14 +284,14 @@
 	@for dep in $?; do \
 	  case '$(am__configure_deps)' in \
 	    *$$dep*) \
-	      cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
-		&& exit 0; \
+	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+	        && { if test -f $@; then exit 0; else break; fi; }; \
 	      exit 1;; \
 	  esac; \
 	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign  tests/UnitTest++/src/Makefile'; \
-	cd $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign  tests/UnitTest++/src/Makefile
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign tests/UnitTest++/src/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign tests/UnitTest++/src/Makefile
 .PRECIOUS: Makefile
 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 	@case '$?' in \
@@ -271,6 +309,7 @@
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 $(ACLOCAL_M4):  $(am__aclocal_m4_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
 
 clean-checkLTLIBRARIES:
 	-test -z "$(check_LTLIBRARIES)" || rm -f $(check_LTLIBRARIES)
@@ -307,21 +346,21 @@
 
 .cpp.o:
 @am__fastdepCXX_TRUE@	$(CXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCXX_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCXX_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCXX_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCXX_FALSE@	$(CXXCOMPILE) -c -o $@ $<
 
 .cpp.obj:
 @am__fastdepCXX_TRUE@	$(CXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
-@am__fastdepCXX_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCXX_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCXX_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCXX_FALSE@	$(CXXCOMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
 
 .cpp.lo:
 @am__fastdepCXX_TRUE@	$(LTCXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCXX_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
+@am__fastdepCXX_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
 @AMDEP_TRUE@@am__fastdepCXX_FALSE@	source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCXX_FALSE@	$(LTCXXCOMPILE) -c -o $@ $<
@@ -356,7 +395,7 @@
 	  else \
 	    local_target="$$target"; \
 	  fi; \
-	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
 	  || eval $$failcom; \
 	done; \
 	if test "$$dot_seen" = "no"; then \
@@ -390,16 +429,16 @@
 	  else \
 	    local_target="$$target"; \
 	  fi; \
-	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
 	  || eval $$failcom; \
 	done && test -z "$$fail"
 tags-recursive:
 	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
+	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
 	done
 ctags-recursive:
 	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
+	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
 	done
 
 ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
@@ -407,14 +446,14 @@
 	unique=`for i in $$list; do \
 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 	  done | \
-	  $(AWK) '{ files[$$0] = 1; nonemtpy = 1; } \
+	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
 	mkid -fID $$unique
 tags: TAGS
 
 TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
+	set x; \
 	here=`pwd`; \
 	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
 	  include_option=--etags-include; \
@@ -426,7 +465,7 @@
 	list='$(SUBDIRS)'; for subdir in $$list; do \
 	  if test "$$subdir" = .; then :; else \
 	    test ! -f $$subdir/TAGS || \
-	      tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
+	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
 	  fi; \
 	done; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
@@ -435,29 +474,34 @@
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
 	  test -n "$$unique" || unique=$$empty_fix; \
-	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	    $$tags $$unique; \
+	  if test $$# -gt 0; then \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
 	fi
 ctags: CTAGS
 CTAGS: ctags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	test -z "$(CTAGS_ARGS)$$tags$$unique" \
+	test -z "$(CTAGS_ARGS)$$unique" \
 	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
-	     $$tags $$unique
+	     $$unique
 
 GTAGS:
 	here=`$(am__cd) $(top_builddir) && pwd` \
-	  && cd $(top_srcdir) \
-	  && gtags -i $(GTAGS_ARGS) $$here
+	  && $(am__cd) $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) "$$here"
 
 distclean-tags:
 	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
@@ -478,29 +522,44 @@
 	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
 	  if test -d $$d/$$file; then \
 	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
 	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 	    fi; \
-	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
 	  else \
-	    test -f $(distdir)/$$file \
-	    || cp -p $$d/$$file $(distdir)/$$file \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
 	    || exit 1; \
 	  fi; \
 	done
-	list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
 	  if test "$$subdir" = .; then :; else \
 	    test -d "$(distdir)/$$subdir" \
 	    || $(MKDIR_P) "$(distdir)/$$subdir" \
 	    || exit 1; \
-	    distdir=`$(am__cd) $(distdir) && pwd`; \
-	    top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
-	    (cd $$subdir && \
+	  fi; \
+	done
+	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+	  if test "$$subdir" = .; then :; else \
+	    dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
+	    $(am__relativize); \
+	    new_distdir=$$reldir; \
+	    dir1=$$subdir; dir2="$(top_distdir)"; \
+	    $(am__relativize); \
+	    new_top_distdir=$$reldir; \
+	    echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
+	    echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
+	    ($(am__cd) $$subdir && \
 	      $(MAKE) $(AM_MAKEFLAGS) \
-	        top_distdir="$$top_distdir" \
-	        distdir="$$distdir/$$subdir" \
+	        top_distdir="$$new_top_distdir" \
+	        distdir="$$new_distdir" \
 		am__remove_distdir=: \
 		am__skip_length_check=: \
+		am__skip_mode_fix=: \
 	        distdir) \
 	      || exit 1; \
 	  fi; \
@@ -531,6 +590,7 @@
 
 distclean-generic:
 	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
 
 maintainer-clean-generic:
 	@echo "This command is intended for maintainers to use"
@@ -552,6 +612,8 @@
 
 html: html-recursive
 
+html-am:
+
 info: info-recursive
 
 info-am:
@@ -560,18 +622,28 @@
 
 install-dvi: install-dvi-recursive
 
+install-dvi-am:
+
 install-exec-am:
 
 install-html: install-html-recursive
 
+install-html-am:
+
 install-info: install-info-recursive
 
+install-info-am:
+
 install-man:
 
 install-pdf: install-pdf-recursive
 
+install-pdf-am:
+
 install-ps: install-ps-recursive
 
+install-ps-am:
+
 installcheck-am:
 
 maintainer-clean: maintainer-clean-recursive
@@ -594,8 +666,8 @@
 
 uninstall-am:
 
-.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) install-am \
-	install-strip
+.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) check-am \
+	ctags-recursive install-am install-strip tags-recursive
 
 .PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
 	all all-am check check-am clean clean-checkLTLIBRARIES \
@@ -612,6 +684,7 @@
 	mostlyclean-libtool pdf pdf-am ps ps-am tags tags-recursive \
 	uninstall uninstall-am
 
+
 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 # Otherwise a system limit (for SysV at least) may be exceeded.
 .NOEXPORT:
--- ode-0.11.orig/tests/UnitTest++/src/Posix/Makefile.in
+++ ode-0.11/tests/UnitTest++/src/Posix/Makefile.in
@@ -1,8 +1,9 @@
-# Makefile.in generated by automake 1.10.1 from Makefile.am.
+# Makefile.in generated by automake 1.11 from Makefile.am.
 # @configure_input@
 
 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
+# Inc.
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -15,8 +16,9 @@
 @SET_MAKE@
 VPATH = @srcdir@
 pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
 install_sh_DATA = $(install_sh) -c -m 644
 install_sh_PROGRAM = $(install_sh) -c
@@ -40,12 +42,14 @@
 mkinstalldirs = $(install_sh) -d
 CONFIG_HEADER = $(top_builddir)/ode/src/config.h
 CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
 libhelper_la_LIBADD =
 am_libhelper_la_OBJECTS = SignalTranslator.lo TimeHelpers.lo
 libhelper_la_OBJECTS = $(am_libhelper_la_OBJECTS)
 DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/ode/src
 depcomp = $(SHELL) $(top_srcdir)/depcomp
 am__depfiles_maybe = depfiles
+am__mv = mv -f
 CXXCOMPILE = $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
 	$(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS)
 LTCXXCOMPILE = $(LIBTOOL) --tag=CXX $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
@@ -92,15 +96,14 @@
 DEPDIR = @DEPDIR@
 DLLTOOL = @DLLTOOL@
 DSYMUTIL = @DSYMUTIL@
-ECHO = @ECHO@
+DUMPBIN = @DUMPBIN@
 ECHO_C = @ECHO_C@
 ECHO_N = @ECHO_N@
 ECHO_T = @ECHO_T@
 EGREP = @EGREP@
 EXEEXT = @EXEEXT@
 EXTRA_LIBTOOL_LDFLAGS = @EXTRA_LIBTOOL_LDFLAGS@
-F77 = @F77@
-FFLAGS = @FFLAGS@
+FGREP = @FGREP@
 GL_LIBS = @GL_LIBS@
 GREP = @GREP@
 INSTALL = @INSTALL@
@@ -108,26 +111,32 @@
 INSTALL_PROGRAM = @INSTALL_PROGRAM@
 INSTALL_SCRIPT = @INSTALL_SCRIPT@
 INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LD = @LD@
 LDFLAGS = @LDFLAGS@
 LIBOBJS = @LIBOBJS@
 LIBS = @LIBS@
 LIBSTDCXX = @LIBSTDCXX@
 LIBTOOL = @LIBTOOL@
+LIPO = @LIPO@
 LN_S = @LN_S@
 LTLIBOBJS = @LTLIBOBJS@
 MAKEINFO = @MAKEINFO@
 MKDIR_P = @MKDIR_P@
+NM = @NM@
 NMEDIT = @NMEDIT@
 OBJDUMP = @OBJDUMP@
 OBJEXT = @OBJEXT@
 ODE_PRECISION = @ODE_PRECISION@
 ODE_RELEASE = @ODE_RELEASE@
 ODE_VERSION_INFO = @ODE_VERSION_INFO@
+OTOOL = @OTOOL@
+OTOOL64 = @OTOOL64@
 PACKAGE = @PACKAGE@
 PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
 PACKAGE_NAME = @PACKAGE_NAME@
 PACKAGE_STRING = @PACKAGE_STRING@
 PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
 PACKAGE_VERSION = @PACKAGE_VERSION@
 PATH_SEPARATOR = @PATH_SEPARATOR@
 RANLIB = @RANLIB@
@@ -148,7 +157,7 @@
 abs_top_srcdir = @abs_top_srcdir@
 ac_ct_CC = @ac_ct_CC@
 ac_ct_CXX = @ac_ct_CXX@
-ac_ct_F77 = @ac_ct_F77@
+ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
 ac_ct_WINDRES = @ac_ct_WINDRES@
 am__include = @am__include@
 am__leading_dot = @am__leading_dot@
@@ -180,6 +189,7 @@
 libexecdir = @libexecdir@
 localedir = @localedir@
 localstatedir = @localstatedir@
+lt_ECHO = @lt_ECHO@
 mandir = @mandir@
 mkdir_p = @mkdir_p@
 oldincludedir = @oldincludedir@
@@ -208,14 +218,14 @@
 	@for dep in $?; do \
 	  case '$(am__configure_deps)' in \
 	    *$$dep*) \
-	      cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
-		&& exit 0; \
+	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+	        && { if test -f $@; then exit 0; else break; fi; }; \
 	      exit 1;; \
 	  esac; \
 	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign  tests/UnitTest++/src/Posix/Makefile'; \
-	cd $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign  tests/UnitTest++/src/Posix/Makefile
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign tests/UnitTest++/src/Posix/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign tests/UnitTest++/src/Posix/Makefile
 .PRECIOUS: Makefile
 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 	@case '$?' in \
@@ -233,6 +243,7 @@
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 $(ACLOCAL_M4):  $(am__aclocal_m4_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
 
 clean-checkLTLIBRARIES:
 	-test -z "$(check_LTLIBRARIES)" || rm -f $(check_LTLIBRARIES)
@@ -256,21 +267,21 @@
 
 .cpp.o:
 @am__fastdepCXX_TRUE@	$(CXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCXX_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCXX_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCXX_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCXX_FALSE@	$(CXXCOMPILE) -c -o $@ $<
 
 .cpp.obj:
 @am__fastdepCXX_TRUE@	$(CXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
-@am__fastdepCXX_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCXX_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCXX_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCXX_FALSE@	$(CXXCOMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
 
 .cpp.lo:
 @am__fastdepCXX_TRUE@	$(LTCXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCXX_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
+@am__fastdepCXX_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
 @AMDEP_TRUE@@am__fastdepCXX_FALSE@	source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCXX_FALSE@	$(LTCXXCOMPILE) -c -o $@ $<
@@ -286,14 +297,14 @@
 	unique=`for i in $$list; do \
 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 	  done | \
-	  $(AWK) '{ files[$$0] = 1; nonemtpy = 1; } \
+	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
 	mkid -fID $$unique
 tags: TAGS
 
 TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
+	set x; \
 	here=`pwd`; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
@@ -301,29 +312,34 @@
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
 	  test -n "$$unique" || unique=$$empty_fix; \
-	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	    $$tags $$unique; \
+	  if test $$# -gt 0; then \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
 	fi
 ctags: CTAGS
 CTAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	test -z "$(CTAGS_ARGS)$$tags$$unique" \
+	test -z "$(CTAGS_ARGS)$$unique" \
 	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
-	     $$tags $$unique
+	     $$unique
 
 GTAGS:
 	here=`$(am__cd) $(top_builddir) && pwd` \
-	  && cd $(top_srcdir) \
-	  && gtags -i $(GTAGS_ARGS) $$here
+	  && $(am__cd) $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) "$$here"
 
 distclean-tags:
 	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
@@ -344,13 +360,17 @@
 	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
 	  if test -d $$d/$$file; then \
 	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
 	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 	    fi; \
-	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
 	  else \
-	    test -f $(distdir)/$$file \
-	    || cp -p $$d/$$file $(distdir)/$$file \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
 	    || exit 1; \
 	  fi; \
 	done
@@ -379,6 +399,7 @@
 
 distclean-generic:
 	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
 
 maintainer-clean-generic:
 	@echo "This command is intended for maintainers to use"
@@ -400,6 +421,8 @@
 
 html: html-am
 
+html-am:
+
 info: info-am
 
 info-am:
@@ -408,18 +431,28 @@
 
 install-dvi: install-dvi-am
 
+install-dvi-am:
+
 install-exec-am:
 
 install-html: install-html-am
 
+install-html-am:
+
 install-info: install-info-am
 
+install-info-am:
+
 install-man:
 
 install-pdf: install-pdf-am
 
+install-pdf-am:
+
 install-ps: install-ps-am
 
+install-ps-am:
+
 installcheck-am:
 
 maintainer-clean: maintainer-clean-am
@@ -442,7 +475,7 @@
 
 uninstall-am:
 
-.MAKE: install-am install-strip
+.MAKE: check-am install-am install-strip
 
 .PHONY: CTAGS GTAGS all all-am check check-am clean \
 	clean-checkLTLIBRARIES clean-generic clean-libtool ctags \
@@ -458,6 +491,7 @@
 	mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
 	tags uninstall uninstall-am
 
+
 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 # Otherwise a system limit (for SysV at least) may be exceeded.
 .NOEXPORT:
--- ode-0.11.orig/tests/UnitTest++/src/Win32/Makefile.in
+++ ode-0.11/tests/UnitTest++/src/Win32/Makefile.in
@@ -1,8 +1,9 @@
-# Makefile.in generated by automake 1.10.1 from Makefile.am.
+# Makefile.in generated by automake 1.11 from Makefile.am.
 # @configure_input@
 
 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
+# Inc.
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -15,8 +16,9 @@
 @SET_MAKE@
 VPATH = @srcdir@
 pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
 install_sh_DATA = $(install_sh) -c -m 644
 install_sh_PROGRAM = $(install_sh) -c
@@ -40,12 +42,14 @@
 mkinstalldirs = $(install_sh) -d
 CONFIG_HEADER = $(top_builddir)/ode/src/config.h
 CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
 libhelper_la_LIBADD =
 am_libhelper_la_OBJECTS = TimeHelpers.lo
 libhelper_la_OBJECTS = $(am_libhelper_la_OBJECTS)
 DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/ode/src
 depcomp = $(SHELL) $(top_srcdir)/depcomp
 am__depfiles_maybe = depfiles
+am__mv = mv -f
 CXXCOMPILE = $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
 	$(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS)
 LTCXXCOMPILE = $(LIBTOOL) --tag=CXX $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
@@ -92,15 +96,14 @@
 DEPDIR = @DEPDIR@
 DLLTOOL = @DLLTOOL@
 DSYMUTIL = @DSYMUTIL@
-ECHO = @ECHO@
+DUMPBIN = @DUMPBIN@
 ECHO_C = @ECHO_C@
 ECHO_N = @ECHO_N@
 ECHO_T = @ECHO_T@
 EGREP = @EGREP@
 EXEEXT = @EXEEXT@
 EXTRA_LIBTOOL_LDFLAGS = @EXTRA_LIBTOOL_LDFLAGS@
-F77 = @F77@
-FFLAGS = @FFLAGS@
+FGREP = @FGREP@
 GL_LIBS = @GL_LIBS@
 GREP = @GREP@
 INSTALL = @INSTALL@
@@ -108,26 +111,32 @@
 INSTALL_PROGRAM = @INSTALL_PROGRAM@
 INSTALL_SCRIPT = @INSTALL_SCRIPT@
 INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LD = @LD@
 LDFLAGS = @LDFLAGS@
 LIBOBJS = @LIBOBJS@
 LIBS = @LIBS@
 LIBSTDCXX = @LIBSTDCXX@
 LIBTOOL = @LIBTOOL@
+LIPO = @LIPO@
 LN_S = @LN_S@
 LTLIBOBJS = @LTLIBOBJS@
 MAKEINFO = @MAKEINFO@
 MKDIR_P = @MKDIR_P@
+NM = @NM@
 NMEDIT = @NMEDIT@
 OBJDUMP = @OBJDUMP@
 OBJEXT = @OBJEXT@
 ODE_PRECISION = @ODE_PRECISION@
 ODE_RELEASE = @ODE_RELEASE@
 ODE_VERSION_INFO = @ODE_VERSION_INFO@
+OTOOL = @OTOOL@
+OTOOL64 = @OTOOL64@
 PACKAGE = @PACKAGE@
 PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
 PACKAGE_NAME = @PACKAGE_NAME@
 PACKAGE_STRING = @PACKAGE_STRING@
 PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
 PACKAGE_VERSION = @PACKAGE_VERSION@
 PATH_SEPARATOR = @PATH_SEPARATOR@
 RANLIB = @RANLIB@
@@ -148,7 +157,7 @@
 abs_top_srcdir = @abs_top_srcdir@
 ac_ct_CC = @ac_ct_CC@
 ac_ct_CXX = @ac_ct_CXX@
-ac_ct_F77 = @ac_ct_F77@
+ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
 ac_ct_WINDRES = @ac_ct_WINDRES@
 am__include = @am__include@
 am__leading_dot = @am__leading_dot@
@@ -180,6 +189,7 @@
 libexecdir = @libexecdir@
 localedir = @localedir@
 localstatedir = @localstatedir@
+lt_ECHO = @lt_ECHO@
 mandir = @mandir@
 mkdir_p = @mkdir_p@
 oldincludedir = @oldincludedir@
@@ -206,14 +216,14 @@
 	@for dep in $?; do \
 	  case '$(am__configure_deps)' in \
 	    *$$dep*) \
-	      cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
-		&& exit 0; \
+	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+	        && { if test -f $@; then exit 0; else break; fi; }; \
 	      exit 1;; \
 	  esac; \
 	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign  tests/UnitTest++/src/Win32/Makefile'; \
-	cd $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign  tests/UnitTest++/src/Win32/Makefile
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign tests/UnitTest++/src/Win32/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign tests/UnitTest++/src/Win32/Makefile
 .PRECIOUS: Makefile
 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 	@case '$?' in \
@@ -231,6 +241,7 @@
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 $(ACLOCAL_M4):  $(am__aclocal_m4_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
 
 clean-checkLTLIBRARIES:
 	-test -z "$(check_LTLIBRARIES)" || rm -f $(check_LTLIBRARIES)
@@ -253,21 +264,21 @@
 
 .cpp.o:
 @am__fastdepCXX_TRUE@	$(CXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCXX_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCXX_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCXX_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCXX_FALSE@	$(CXXCOMPILE) -c -o $@ $<
 
 .cpp.obj:
 @am__fastdepCXX_TRUE@	$(CXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
-@am__fastdepCXX_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCXX_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCXX_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCXX_FALSE@	$(CXXCOMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
 
 .cpp.lo:
 @am__fastdepCXX_TRUE@	$(LTCXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCXX_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
+@am__fastdepCXX_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
 @AMDEP_TRUE@@am__fastdepCXX_FALSE@	source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCXX_FALSE@	$(LTCXXCOMPILE) -c -o $@ $<
@@ -283,14 +294,14 @@
 	unique=`for i in $$list; do \
 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 	  done | \
-	  $(AWK) '{ files[$$0] = 1; nonemtpy = 1; } \
+	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
 	mkid -fID $$unique
 tags: TAGS
 
 TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
+	set x; \
 	here=`pwd`; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
@@ -298,29 +309,34 @@
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
 	  test -n "$$unique" || unique=$$empty_fix; \
-	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	    $$tags $$unique; \
+	  if test $$# -gt 0; then \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
 	fi
 ctags: CTAGS
 CTAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	test -z "$(CTAGS_ARGS)$$tags$$unique" \
+	test -z "$(CTAGS_ARGS)$$unique" \
 	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
-	     $$tags $$unique
+	     $$unique
 
 GTAGS:
 	here=`$(am__cd) $(top_builddir) && pwd` \
-	  && cd $(top_srcdir) \
-	  && gtags -i $(GTAGS_ARGS) $$here
+	  && $(am__cd) $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) "$$here"
 
 distclean-tags:
 	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
@@ -341,13 +357,17 @@
 	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
 	  if test -d $$d/$$file; then \
 	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
 	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 	    fi; \
-	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
 	  else \
-	    test -f $(distdir)/$$file \
-	    || cp -p $$d/$$file $(distdir)/$$file \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
 	    || exit 1; \
 	  fi; \
 	done
@@ -376,6 +396,7 @@
 
 distclean-generic:
 	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
 
 maintainer-clean-generic:
 	@echo "This command is intended for maintainers to use"
@@ -397,6 +418,8 @@
 
 html: html-am
 
+html-am:
+
 info: info-am
 
 info-am:
@@ -405,18 +428,28 @@
 
 install-dvi: install-dvi-am
 
+install-dvi-am:
+
 install-exec-am:
 
 install-html: install-html-am
 
+install-html-am:
+
 install-info: install-info-am
 
+install-info-am:
+
 install-man:
 
 install-pdf: install-pdf-am
 
+install-pdf-am:
+
 install-ps: install-ps-am
 
+install-ps-am:
+
 installcheck-am:
 
 maintainer-clean: maintainer-clean-am
@@ -439,7 +472,7 @@
 
 uninstall-am:
 
-.MAKE: install-am install-strip
+.MAKE: check-am install-am install-strip
 
 .PHONY: CTAGS GTAGS all all-am check check-am clean \
 	clean-checkLTLIBRARIES clean-generic clean-libtool ctags \
@@ -455,6 +488,7 @@
 	mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
 	tags uninstall uninstall-am
 
+
 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 # Otherwise a system limit (for SysV at least) may be exceeded.
 .NOEXPORT:
--- ode-0.11.orig/OPCODE/Makefile.in
+++ ode-0.11/OPCODE/Makefile.in
@@ -1,8 +1,9 @@
-# Makefile.in generated by automake 1.10.1 from Makefile.am.
+# Makefile.in generated by automake 1.11 from Makefile.am.
 # @configure_input@
 
 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
+# Inc.
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -16,8 +17,9 @@
 
 VPATH = @srcdir@
 pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
 install_sh_DATA = $(install_sh) -c -m 644
 install_sh_PROGRAM = $(install_sh) -c
@@ -41,6 +43,7 @@
 mkinstalldirs = $(install_sh) -d
 CONFIG_HEADER = $(top_builddir)/ode/src/config.h
 CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
 LTLIBRARIES = $(noinst_LTLIBRARIES)
 libOPCODE_la_LIBADD =
 am_libOPCODE_la_OBJECTS = OPC_AABBCollider.lo OPC_AABBTree.lo \
@@ -55,6 +58,7 @@
 DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/ode/src
 depcomp = $(SHELL) $(top_srcdir)/depcomp
 am__depfiles_maybe = depfiles
+am__mv = mv -f
 CXXCOMPILE = $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
 	$(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS)
 LTCXXCOMPILE = $(LIBTOOL) --tag=CXX $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
@@ -84,10 +88,38 @@
 	ps-recursive uninstall-recursive
 RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
   distclean-recursive maintainer-clean-recursive
+AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
+	$(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
+	distdir
 ETAGS = etags
 CTAGS = ctags
 DIST_SUBDIRS = $(SUBDIRS)
 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+am__relativize = \
+  dir0=`pwd`; \
+  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
+  sed_rest='s,^[^/]*/*,,'; \
+  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
+  sed_butlast='s,/*[^/]*$$,,'; \
+  while test -n "$$dir1"; do \
+    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
+    if test "$$first" != "."; then \
+      if test "$$first" = ".."; then \
+        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
+        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
+      else \
+        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
+        if test "$$first2" = "$$first"; then \
+          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
+        else \
+          dir2="../$$dir2"; \
+        fi; \
+        dir0="$$dir0"/"$$first"; \
+      fi; \
+    fi; \
+    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
+  done; \
+  reldir="$$dir2"
 ACLOCAL = @ACLOCAL@
 ALLOCA = @ALLOCA@
 AMTAR = @AMTAR@
@@ -111,15 +143,14 @@
 DEPDIR = @DEPDIR@
 DLLTOOL = @DLLTOOL@
 DSYMUTIL = @DSYMUTIL@
-ECHO = @ECHO@
+DUMPBIN = @DUMPBIN@
 ECHO_C = @ECHO_C@
 ECHO_N = @ECHO_N@
 ECHO_T = @ECHO_T@
 EGREP = @EGREP@
 EXEEXT = @EXEEXT@
 EXTRA_LIBTOOL_LDFLAGS = @EXTRA_LIBTOOL_LDFLAGS@
-F77 = @F77@
-FFLAGS = @FFLAGS@
+FGREP = @FGREP@
 GL_LIBS = @GL_LIBS@
 GREP = @GREP@
 INSTALL = @INSTALL@
@@ -127,26 +158,32 @@
 INSTALL_PROGRAM = @INSTALL_PROGRAM@
 INSTALL_SCRIPT = @INSTALL_SCRIPT@
 INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LD = @LD@
 LDFLAGS = @LDFLAGS@
 LIBOBJS = @LIBOBJS@
 LIBS = @LIBS@
 LIBSTDCXX = @LIBSTDCXX@
 LIBTOOL = @LIBTOOL@
+LIPO = @LIPO@
 LN_S = @LN_S@
 LTLIBOBJS = @LTLIBOBJS@
 MAKEINFO = @MAKEINFO@
 MKDIR_P = @MKDIR_P@
+NM = @NM@
 NMEDIT = @NMEDIT@
 OBJDUMP = @OBJDUMP@
 OBJEXT = @OBJEXT@
 ODE_PRECISION = @ODE_PRECISION@
 ODE_RELEASE = @ODE_RELEASE@
 ODE_VERSION_INFO = @ODE_VERSION_INFO@
+OTOOL = @OTOOL@
+OTOOL64 = @OTOOL64@
 PACKAGE = @PACKAGE@
 PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
 PACKAGE_NAME = @PACKAGE_NAME@
 PACKAGE_STRING = @PACKAGE_STRING@
 PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
 PACKAGE_VERSION = @PACKAGE_VERSION@
 PATH_SEPARATOR = @PATH_SEPARATOR@
 RANLIB = @RANLIB@
@@ -167,7 +204,7 @@
 abs_top_srcdir = @abs_top_srcdir@
 ac_ct_CC = @ac_ct_CC@
 ac_ct_CXX = @ac_ct_CXX@
-ac_ct_F77 = @ac_ct_F77@
+ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
 ac_ct_WINDRES = @ac_ct_WINDRES@
 am__include = @am__include@
 am__leading_dot = @am__leading_dot@
@@ -199,6 +236,7 @@
 libexecdir = @libexecdir@
 localedir = @localedir@
 localstatedir = @localstatedir@
+lt_ECHO = @lt_ECHO@
 mandir = @mandir@
 mkdir_p = @mkdir_p@
 oldincludedir = @oldincludedir@
@@ -263,14 +301,14 @@
 	@for dep in $?; do \
 	  case '$(am__configure_deps)' in \
 	    *$$dep*) \
-	      cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
-		&& exit 0; \
+	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+	        && { if test -f $@; then exit 0; else break; fi; }; \
 	      exit 1;; \
 	  esac; \
 	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign  OPCODE/Makefile'; \
-	cd $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign  OPCODE/Makefile
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign OPCODE/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign OPCODE/Makefile
 .PRECIOUS: Makefile
 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 	@case '$?' in \
@@ -288,6 +326,7 @@
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 $(ACLOCAL_M4):  $(am__aclocal_m4_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
 
 clean-noinstLTLIBRARIES:
 	-test -z "$(noinst_LTLIBRARIES)" || rm -f $(noinst_LTLIBRARIES)
@@ -331,21 +370,21 @@
 
 .cpp.o:
 @am__fastdepCXX_TRUE@	$(CXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCXX_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCXX_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCXX_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCXX_FALSE@	$(CXXCOMPILE) -c -o $@ $<
 
 .cpp.obj:
 @am__fastdepCXX_TRUE@	$(CXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
-@am__fastdepCXX_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCXX_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCXX_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCXX_FALSE@	$(CXXCOMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
 
 .cpp.lo:
 @am__fastdepCXX_TRUE@	$(LTCXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCXX_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
+@am__fastdepCXX_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
 @AMDEP_TRUE@@am__fastdepCXX_FALSE@	source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCXX_FALSE@	$(LTCXXCOMPILE) -c -o $@ $<
@@ -380,7 +419,7 @@
 	  else \
 	    local_target="$$target"; \
 	  fi; \
-	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
 	  || eval $$failcom; \
 	done; \
 	if test "$$dot_seen" = "no"; then \
@@ -414,16 +453,16 @@
 	  else \
 	    local_target="$$target"; \
 	  fi; \
-	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
 	  || eval $$failcom; \
 	done && test -z "$$fail"
 tags-recursive:
 	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
+	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
 	done
 ctags-recursive:
 	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
+	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
 	done
 
 ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
@@ -431,14 +470,14 @@
 	unique=`for i in $$list; do \
 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 	  done | \
-	  $(AWK) '{ files[$$0] = 1; nonemtpy = 1; } \
+	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
 	mkid -fID $$unique
 tags: TAGS
 
 TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
+	set x; \
 	here=`pwd`; \
 	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
 	  include_option=--etags-include; \
@@ -450,7 +489,7 @@
 	list='$(SUBDIRS)'; for subdir in $$list; do \
 	  if test "$$subdir" = .; then :; else \
 	    test ! -f $$subdir/TAGS || \
-	      tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
+	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
 	  fi; \
 	done; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
@@ -459,29 +498,34 @@
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
 	  test -n "$$unique" || unique=$$empty_fix; \
-	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	    $$tags $$unique; \
+	  if test $$# -gt 0; then \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
 	fi
 ctags: CTAGS
 CTAGS: ctags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	test -z "$(CTAGS_ARGS)$$tags$$unique" \
+	test -z "$(CTAGS_ARGS)$$unique" \
 	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
-	     $$tags $$unique
+	     $$unique
 
 GTAGS:
 	here=`$(am__cd) $(top_builddir) && pwd` \
-	  && cd $(top_srcdir) \
-	  && gtags -i $(GTAGS_ARGS) $$here
+	  && $(am__cd) $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) "$$here"
 
 distclean-tags:
 	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
@@ -502,29 +546,44 @@
 	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
 	  if test -d $$d/$$file; then \
 	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
 	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 	    fi; \
-	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
 	  else \
-	    test -f $(distdir)/$$file \
-	    || cp -p $$d/$$file $(distdir)/$$file \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
 	    || exit 1; \
 	  fi; \
 	done
-	list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
 	  if test "$$subdir" = .; then :; else \
 	    test -d "$(distdir)/$$subdir" \
 	    || $(MKDIR_P) "$(distdir)/$$subdir" \
 	    || exit 1; \
-	    distdir=`$(am__cd) $(distdir) && pwd`; \
-	    top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
-	    (cd $$subdir && \
+	  fi; \
+	done
+	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+	  if test "$$subdir" = .; then :; else \
+	    dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
+	    $(am__relativize); \
+	    new_distdir=$$reldir; \
+	    dir1=$$subdir; dir2="$(top_distdir)"; \
+	    $(am__relativize); \
+	    new_top_distdir=$$reldir; \
+	    echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
+	    echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
+	    ($(am__cd) $$subdir && \
 	      $(MAKE) $(AM_MAKEFLAGS) \
-	        top_distdir="$$top_distdir" \
-	        distdir="$$distdir/$$subdir" \
+	        top_distdir="$$new_top_distdir" \
+	        distdir="$$new_distdir" \
 		am__remove_distdir=: \
 		am__skip_length_check=: \
+		am__skip_mode_fix=: \
 	        distdir) \
 	      || exit 1; \
 	  fi; \
@@ -554,6 +613,7 @@
 
 distclean-generic:
 	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
 
 maintainer-clean-generic:
 	@echo "This command is intended for maintainers to use"
@@ -575,6 +635,8 @@
 
 html: html-recursive
 
+html-am:
+
 info: info-recursive
 
 info-am:
@@ -583,18 +645,28 @@
 
 install-dvi: install-dvi-recursive
 
+install-dvi-am:
+
 install-exec-am:
 
 install-html: install-html-recursive
 
+install-html-am:
+
 install-info: install-info-recursive
 
+install-info-am:
+
 install-man:
 
 install-pdf: install-pdf-recursive
 
+install-pdf-am:
+
 install-ps: install-ps-recursive
 
+install-ps-am:
+
 installcheck-am:
 
 maintainer-clean: maintainer-clean-recursive
@@ -617,8 +689,8 @@
 
 uninstall-am:
 
-.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) install-am \
-	install-strip
+.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) ctags-recursive \
+	install-am install-strip tags-recursive
 
 .PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
 	all all-am check check-am clean clean-generic clean-libtool \
@@ -635,6 +707,7 @@
 	mostlyclean-libtool pdf pdf-am ps ps-am tags tags-recursive \
 	uninstall uninstall-am
 
+
 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 # Otherwise a system limit (for SysV at least) may be exceeded.
 .NOEXPORT:
--- ode-0.11.orig/OPCODE/Ice/Makefile.in
+++ ode-0.11/OPCODE/Ice/Makefile.in
@@ -1,8 +1,9 @@
-# Makefile.in generated by automake 1.10.1 from Makefile.am.
+# Makefile.in generated by automake 1.11 from Makefile.am.
 # @configure_input@
 
 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
+# Inc.
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -16,8 +17,9 @@
 
 VPATH = @srcdir@
 pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
 install_sh_DATA = $(install_sh) -c -m 644
 install_sh_PROGRAM = $(install_sh) -c
@@ -41,6 +43,7 @@
 mkinstalldirs = $(install_sh) -d
 CONFIG_HEADER = $(top_builddir)/ode/src/config.h
 CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
 LTLIBRARIES = $(noinst_LTLIBRARIES)
 libIce_la_LIBADD =
 am_libIce_la_OBJECTS = IceAABB.lo IceContainer.lo IceHPoint.lo \
@@ -51,6 +54,7 @@
 DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/ode/src
 depcomp = $(SHELL) $(top_srcdir)/depcomp
 am__depfiles_maybe = depfiles
+am__mv = mv -f
 CXXCOMPILE = $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
 	$(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS)
 LTCXXCOMPILE = $(LIBTOOL) --tag=CXX $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
@@ -97,15 +101,14 @@
 DEPDIR = @DEPDIR@
 DLLTOOL = @DLLTOOL@
 DSYMUTIL = @DSYMUTIL@
-ECHO = @ECHO@
+DUMPBIN = @DUMPBIN@
 ECHO_C = @ECHO_C@
 ECHO_N = @ECHO_N@
 ECHO_T = @ECHO_T@
 EGREP = @EGREP@
 EXEEXT = @EXEEXT@
 EXTRA_LIBTOOL_LDFLAGS = @EXTRA_LIBTOOL_LDFLAGS@
-F77 = @F77@
-FFLAGS = @FFLAGS@
+FGREP = @FGREP@
 GL_LIBS = @GL_LIBS@
 GREP = @GREP@
 INSTALL = @INSTALL@
@@ -113,26 +116,32 @@
 INSTALL_PROGRAM = @INSTALL_PROGRAM@
 INSTALL_SCRIPT = @INSTALL_SCRIPT@
 INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LD = @LD@
 LDFLAGS = @LDFLAGS@
 LIBOBJS = @LIBOBJS@
 LIBS = @LIBS@
 LIBSTDCXX = @LIBSTDCXX@
 LIBTOOL = @LIBTOOL@
+LIPO = @LIPO@
 LN_S = @LN_S@
 LTLIBOBJS = @LTLIBOBJS@
 MAKEINFO = @MAKEINFO@
 MKDIR_P = @MKDIR_P@
+NM = @NM@
 NMEDIT = @NMEDIT@
 OBJDUMP = @OBJDUMP@
 OBJEXT = @OBJEXT@
 ODE_PRECISION = @ODE_PRECISION@
 ODE_RELEASE = @ODE_RELEASE@
 ODE_VERSION_INFO = @ODE_VERSION_INFO@
+OTOOL = @OTOOL@
+OTOOL64 = @OTOOL64@
 PACKAGE = @PACKAGE@
 PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
 PACKAGE_NAME = @PACKAGE_NAME@
 PACKAGE_STRING = @PACKAGE_STRING@
 PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
 PACKAGE_VERSION = @PACKAGE_VERSION@
 PATH_SEPARATOR = @PATH_SEPARATOR@
 RANLIB = @RANLIB@
@@ -153,7 +162,7 @@
 abs_top_srcdir = @abs_top_srcdir@
 ac_ct_CC = @ac_ct_CC@
 ac_ct_CXX = @ac_ct_CXX@
-ac_ct_F77 = @ac_ct_F77@
+ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
 ac_ct_WINDRES = @ac_ct_WINDRES@
 am__include = @am__include@
 am__leading_dot = @am__leading_dot@
@@ -185,6 +194,7 @@
 libexecdir = @libexecdir@
 localedir = @localedir@
 localstatedir = @localstatedir@
+lt_ECHO = @lt_ECHO@
 mandir = @mandir@
 mkdir_p = @mkdir_p@
 oldincludedir = @oldincludedir@
@@ -226,14 +236,14 @@
 	@for dep in $?; do \
 	  case '$(am__configure_deps)' in \
 	    *$$dep*) \
-	      cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
-		&& exit 0; \
+	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+	        && { if test -f $@; then exit 0; else break; fi; }; \
 	      exit 1;; \
 	  esac; \
 	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign  OPCODE/Ice/Makefile'; \
-	cd $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign  OPCODE/Ice/Makefile
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign OPCODE/Ice/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign OPCODE/Ice/Makefile
 .PRECIOUS: Makefile
 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 	@case '$?' in \
@@ -251,6 +261,7 @@
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 $(ACLOCAL_M4):  $(am__aclocal_m4_deps)
 	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
 
 clean-noinstLTLIBRARIES:
 	-test -z "$(noinst_LTLIBRARIES)" || rm -f $(noinst_LTLIBRARIES)
@@ -287,21 +298,21 @@
 
 .cpp.o:
 @am__fastdepCXX_TRUE@	$(CXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCXX_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCXX_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCXX_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCXX_FALSE@	$(CXXCOMPILE) -c -o $@ $<
 
 .cpp.obj:
 @am__fastdepCXX_TRUE@	$(CXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
-@am__fastdepCXX_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCXX_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCXX_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCXX_FALSE@	$(CXXCOMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
 
 .cpp.lo:
 @am__fastdepCXX_TRUE@	$(LTCXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCXX_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
+@am__fastdepCXX_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
 @AMDEP_TRUE@@am__fastdepCXX_FALSE@	source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCXX_FALSE@	$(LTCXXCOMPILE) -c -o $@ $<
@@ -317,14 +328,14 @@
 	unique=`for i in $$list; do \
 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 	  done | \
-	  $(AWK) '{ files[$$0] = 1; nonemtpy = 1; } \
+	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
 	mkid -fID $$unique
 tags: TAGS
 
 TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
+	set x; \
 	here=`pwd`; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
@@ -332,29 +343,34 @@
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
 	  test -n "$$unique" || unique=$$empty_fix; \
-	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	    $$tags $$unique; \
+	  if test $$# -gt 0; then \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
 	fi
 ctags: CTAGS
 CTAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
-	tags=; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 	  done | \
 	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	test -z "$(CTAGS_ARGS)$$tags$$unique" \
+	test -z "$(CTAGS_ARGS)$$unique" \
 	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
-	     $$tags $$unique
+	     $$unique
 
 GTAGS:
 	here=`$(am__cd) $(top_builddir) && pwd` \
-	  && cd $(top_srcdir) \
-	  && gtags -i $(GTAGS_ARGS) $$here
+	  && $(am__cd) $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) "$$here"
 
 distclean-tags:
 	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
@@ -375,13 +391,17 @@
 	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
 	  if test -d $$d/$$file; then \
 	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
 	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 	    fi; \
-	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
 	  else \
-	    test -f $(distdir)/$$file \
-	    || cp -p $$d/$$file $(distdir)/$$file \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
 	    || exit 1; \
 	  fi; \
 	done
@@ -409,6 +429,7 @@
 
 distclean-generic:
 	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
 
 maintainer-clean-generic:
 	@echo "This command is intended for maintainers to use"
@@ -430,6 +451,8 @@
 
 html: html-am
 
+html-am:
+
 info: info-am
 
 info-am:
@@ -438,18 +461,28 @@
 
 install-dvi: install-dvi-am
 
+install-dvi-am:
+
 install-exec-am:
 
 install-html: install-html-am
 
+install-html-am:
+
 install-info: install-info-am
 
+install-info-am:
+
 install-man:
 
 install-pdf: install-pdf-am
 
+install-pdf-am:
+
 install-ps: install-ps-am
 
+install-ps-am:
+
 installcheck-am:
 
 maintainer-clean: maintainer-clean-am
@@ -487,6 +520,7 @@
 	mostlyclean-compile mostlyclean-generic mostlyclean-libtool \
 	pdf pdf-am ps ps-am tags uninstall uninstall-am
 
+
 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 # Otherwise a system limit (for SysV at least) may be exceeded.
 .NOEXPORT: