diff -Nru libvdpau-1.1.1/aclocal.m4 libvdpau-1.2/aclocal.m4 --- libvdpau-1.1.1/aclocal.m4 2015-08-31 21:00:05.000000000 +0000 +++ libvdpau-1.2/aclocal.m4 2019-02-28 18:43:02.000000000 +0000 @@ -1,6 +1,6 @@ -# generated automatically by aclocal 1.15 -*- Autoconf -*- +# generated automatically by aclocal 1.16.1 -*- Autoconf -*- -# Copyright (C) 1996-2014 Free Software Foundation, Inc. +# Copyright (C) 1996-2018 Free Software Foundation, Inc. # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -22,7 +22,7 @@ # libtool.m4 - Configure libtool for the host system. -*-Autoconf-*- # -# Copyright (C) 1996-2001, 2003-2015 Free Software Foundation, Inc. +# Copyright (C) 1996-2001, 2003-2018 Free Software Foundation, Inc. # Written by Gordon Matzigkeit, 1996 # # This file is free software; the Free Software Foundation gives @@ -241,8 +241,8 @@ ofile=libtool can_build_shared=yes -# All known linkers require a '.a' archive for static linking (except MSVC, -# which needs '.lib'). +# All known linkers require a '.a' archive for static linking (except MSVC and +# ICC, which need '.lib'). libext=a with_gnu_ld=$lt_cv_prog_gnu_ld @@ -1056,8 +1056,8 @@ _LT_EOF echo "$LTCC $LTCFLAGS -c -o conftest.o conftest.c" >&AS_MESSAGE_LOG_FD $LTCC $LTCFLAGS -c -o conftest.o conftest.c 2>&AS_MESSAGE_LOG_FD - echo "$AR cru libconftest.a conftest.o" >&AS_MESSAGE_LOG_FD - $AR cru libconftest.a conftest.o 2>&AS_MESSAGE_LOG_FD + echo "$AR $AR_FLAGS libconftest.a conftest.o" >&AS_MESSAGE_LOG_FD + $AR $AR_FLAGS libconftest.a conftest.o 2>&AS_MESSAGE_LOG_FD echo "$RANLIB libconftest.a" >&AS_MESSAGE_LOG_FD $RANLIB libconftest.a 2>&AS_MESSAGE_LOG_FD cat > conftest.c << _LT_EOF @@ -1507,9 +1507,22 @@ m4_defun([_LT_PROG_AR], [AC_CHECK_TOOLS(AR, [ar], false) : ${AR=ar} -: ${AR_FLAGS=cru} _LT_DECL([], [AR], [1], [The archiver]) -_LT_DECL([], [AR_FLAGS], [1], [Flags to create an archive]) + +# Use ARFLAGS variable as AR's operation code to sync the variable naming with +# Automake. If both AR_FLAGS and ARFLAGS are specified, AR_FLAGS should have +# higher priority because thats what people were doing historically (setting +# ARFLAGS for automake and AR_FLAGS for libtool). FIXME: Make the AR_FLAGS +# variable obsoleted/removed. + +test ${AR_FLAGS+y} || AR_FLAGS=${ARFLAGS-cr} +lt_ar_flags=$AR_FLAGS +_LT_DECL([], [lt_ar_flags], [0], [Flags to create an archive (by configure)]) + +# Make AR_FLAGS overridable by 'make ARFLAGS='. Don't try to run-time override +# by AR_FLAGS because that was never working and AR_FLAGS is about to die. +_LT_DECL([], [AR_FLAGS], [\@S|@{ARFLAGS-"\@S|@lt_ar_flags"}], + [Flags to create an archive]) AC_CACHE_CHECK([for archiver @FILE support], [lt_cv_ar_at_file], [lt_cv_ar_at_file=no @@ -2221,26 +2234,35 @@ striplib= old_striplib= AC_MSG_CHECKING([whether stripping libraries is possible]) -if test -n "$STRIP" && $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then - test -z "$old_striplib" && old_striplib="$STRIP --strip-debug" - test -z "$striplib" && striplib="$STRIP --strip-unneeded" - AC_MSG_RESULT([yes]) +if test -z "$STRIP"; then + AC_MSG_RESULT([no]) else -# FIXME - insert some real tests, host_os isn't really good enough - case $host_os in - darwin*) - if test -n "$STRIP"; then + if $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then + old_striplib="$STRIP --strip-debug" + striplib="$STRIP --strip-unneeded" + AC_MSG_RESULT([yes]) + else + case $host_os in + darwin*) + # FIXME - insert some real tests, host_os isn't really good enough striplib="$STRIP -x" old_striplib="$STRIP -S" AC_MSG_RESULT([yes]) - else + ;; + freebsd*) + if $STRIP -V 2>&1 | $GREP "elftoolchain" >/dev/null; then + old_striplib="$STRIP --strip-debug" + striplib="$STRIP --strip-unneeded" + AC_MSG_RESULT([yes]) + else + AC_MSG_RESULT([no]) + fi + ;; + *) AC_MSG_RESULT([no]) - fi - ;; - *) - AC_MSG_RESULT([no]) - ;; - esac + ;; + esac + fi fi _LT_DECL([], [old_striplib], [1], [Commands to strip libraries]) _LT_DECL([], [striplib], [1]) @@ -2579,8 +2601,8 @@ dynamic_linker='Win32 ld.exe' ;; - *,cl*) - # Native MSVC + *,cl* | *,icl*) + # Native MSVC or ICC libname_spec='$name' soname_spec='$libname`echo $release | $SED -e 's/[[.]]/-/g'`$versuffix$shared_ext' library_names_spec='$libname.dll.lib' @@ -2636,7 +2658,7 @@ ;; *) - # Assume MSVC wrapper + # Assume MSVC and ICC wrapper library_names_spec='$libname`echo $release | $SED -e 's/[[.]]/-/g'`$versuffix$shared_ext $libname.lib' dynamic_linker='Win32 ld.exe' ;; @@ -4024,7 +4046,7 @@ if test "$lt_cv_nm_interface" = "MS dumpbin"; then # Fake it for dumpbin and say T for any non-static function, # D for any global variable and I for any imported variable. - # Also find C++ and __fastcall symbols from MSVC++, + # Also find C++ and __fastcall symbols from MSVC++ or ICC, # which start with @ or ?. lt_cv_sys_global_symbol_pipe="$AWK ['"\ " {last_section=section; section=\$ 3};"\ @@ -4933,7 +4955,7 @@ if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && ([substr](\$ 3,1,1) != ".")) { if (\$ 2 == "W") { print \$ 3 " weak" } else { print \$ 3 } } }'\'' | sort -u > $export_symbols' else - _LT_TAGVAR(export_symbols_cmds, $1)='`func_echo_all $NM | $SED -e '\''s/B\([[^B]]*\)$/P\1/'\''` -PCpgl $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) && ([substr](\$ 1,1,1) != ".")) { if ((\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) { print \$ 1 " weak" } else { print \$ 1 } } }'\'' | sort -u > $export_symbols' + _LT_TAGVAR(export_symbols_cmds, $1)='`func_echo_all $NM | $SED -e '\''s/B\([[^B]]*\)$/P\1/'\''` -PCpgl $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "L") || (\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) && ([substr](\$ 1,1,1) != ".")) { if ((\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) { print \$ 1 " weak" } else { print \$ 1 } } }'\'' | sort -u > $export_symbols' fi ;; pw32*) @@ -4941,7 +4963,7 @@ ;; cygwin* | mingw* | cegcc*) case $cc_basename in - cl*) + cl* | icl*) _LT_TAGVAR(exclude_expsyms, $1)='_NULL_IMPORT_DESCRIPTOR|_IMPORT_DESCRIPTOR_.*' ;; *) @@ -4998,15 +5020,15 @@ case $host_os in cygwin* | mingw* | pw32* | cegcc*) - # FIXME: the MSVC++ port hasn't been tested in a loooong time + # FIXME: the MSVC++ and ICC port hasn't been tested in a loooong time # When not using gcc, we currently assume that we are using - # Microsoft Visual C++. + # Microsoft Visual C++ or Intel C++ Compiler. if test yes != "$GCC"; then with_gnu_ld=no fi ;; interix*) - # we just hope/assume this is gcc and not c89 (= MSVC++) + # we just hope/assume this is gcc and not c89 (= MSVC++ or ICC) with_gnu_ld=yes ;; openbsd* | bitrig*) @@ -5170,6 +5192,7 @@ emximp -o $lib $output_objdir/$libname.def' _LT_TAGVAR(old_archive_From_new_cmds, $1)='emximp -o $output_objdir/${libname}_dll.a $output_objdir/$libname.def' _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes + _LT_TAGVAR(file_list_spec, $1)='@' ;; interix[[3-9]]*) @@ -5387,7 +5410,7 @@ if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && ([substr](\$ 3,1,1) != ".")) { if (\$ 2 == "W") { print \$ 3 " weak" } else { print \$ 3 } } }'\'' | sort -u > $export_symbols' else - _LT_TAGVAR(export_symbols_cmds, $1)='`func_echo_all $NM | $SED -e '\''s/B\([[^B]]*\)$/P\1/'\''` -PCpgl $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) && ([substr](\$ 1,1,1) != ".")) { if ((\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) { print \$ 1 " weak" } else { print \$ 1 } } }'\'' | sort -u > $export_symbols' + _LT_TAGVAR(export_symbols_cmds, $1)='`func_echo_all $NM | $SED -e '\''s/B\([[^B]]*\)$/P\1/'\''` -PCpgl $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "L") || (\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) && ([substr](\$ 1,1,1) != ".")) { if ((\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) { print \$ 1 " weak" } else { print \$ 1 } } }'\'' | sort -u > $export_symbols' fi aix_use_runtimelinking=no @@ -5570,12 +5593,12 @@ cygwin* | mingw* | pw32* | cegcc*) # When not using gcc, we currently assume that we are using - # Microsoft Visual C++. + # Microsoft Visual C++ or Intel C++ Compiler. # hardcode_libdir_flag_spec is actually meaningless, as there is # no search path for DLLs. case $cc_basename in - cl*) - # Native MSVC + cl* | icl*) + # Native MSVC or ICC _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' ' _LT_TAGVAR(allow_undefined_flag, $1)=unsupported _LT_TAGVAR(always_export_symbols, $1)=yes @@ -5616,7 +5639,7 @@ fi' ;; *) - # Assume MSVC wrapper + # Assume MSVC and ICC wrapper _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' ' _LT_TAGVAR(allow_undefined_flag, $1)=unsupported # Tell ltmain to make .lib files, not .a files. @@ -5875,6 +5898,7 @@ emximp -o $lib $output_objdir/$libname.def' _LT_TAGVAR(old_archive_From_new_cmds, $1)='emximp -o $output_objdir/${libname}_dll.a $output_objdir/$libname.def' _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes + _LT_TAGVAR(file_list_spec, $1)='@' ;; osf3*) @@ -6641,8 +6665,8 @@ cygwin* | mingw* | pw32* | cegcc*) case $GXX,$cc_basename in - ,cl* | no,cl*) - # Native MSVC + ,cl* | no,cl* | ,icl* | no,icl*) + # Native MSVC or ICC # hardcode_libdir_flag_spec is actually meaningless, as there is # no search path for DLLs. _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' ' @@ -6740,6 +6764,7 @@ emximp -o $lib $output_objdir/$libname.def' _LT_TAGVAR(old_archive_From_new_cmds, $1)='emximp -o $output_objdir/${libname}_dll.a $output_objdir/$libname.def' _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes + _LT_TAGVAR(file_list_spec, $1)='@' ;; dgux*) @@ -8370,7 +8395,7 @@ # Helper functions for option handling. -*- Autoconf -*- # -# Copyright (C) 2004-2005, 2007-2009, 2011-2015 Free Software +# Copyright (C) 2004-2005, 2007-2009, 2011-2018 Free Software # Foundation, Inc. # Written by Gary V. Vaughan, 2004 # @@ -8802,7 +8827,7 @@ # ltsugar.m4 -- libtool m4 base layer. -*-Autoconf-*- # -# Copyright (C) 2004-2005, 2007-2008, 2011-2015 Free Software +# Copyright (C) 2004-2005, 2007-2008, 2011-2018 Free Software # Foundation, Inc. # Written by Gary V. Vaughan, 2004 # @@ -8927,7 +8952,7 @@ # ltversion.m4 -- version numbers -*- Autoconf -*- # -# Copyright (C) 2004, 2011-2015 Free Software Foundation, Inc. +# Copyright (C) 2004, 2011-2018 Free Software Foundation, Inc. # Written by Scott James Remnant, 2004 # # This file is free software; the Free Software Foundation gives @@ -8936,22 +8961,22 @@ # @configure_input@ -# serial 4179 ltversion.m4 +# serial 4221 ltversion.m4 # This file is part of GNU Libtool -m4_define([LT_PACKAGE_VERSION], [2.4.6]) -m4_define([LT_PACKAGE_REVISION], [2.4.6]) +m4_define([LT_PACKAGE_VERSION], [2.4.6.42-b88ce]) +m4_define([LT_PACKAGE_REVISION], [2.4.6.42]) AC_DEFUN([LTVERSION_VERSION], -[macro_version='2.4.6' -macro_revision='2.4.6' +[macro_version='2.4.6.42-b88ce' +macro_revision='2.4.6.42' _LT_DECL(, macro_version, 0, [Which release of libtool.m4 was used?]) _LT_DECL(, macro_revision, 0) ]) # lt~obsolete.m4 -- aclocal satisfying obsolete definitions. -*-Autoconf-*- # -# Copyright (C) 2004-2005, 2007, 2009, 2011-2015 Free Software +# Copyright (C) 2004-2005, 2007, 2009, 2011-2018 Free Software # Foundation, Inc. # Written by Scott James Remnant, 2004. # @@ -9049,32 +9074,63 @@ m4_ifndef([_LT_PROG_FC], [AC_DEFUN([_LT_PROG_FC])]) m4_ifndef([_LT_PROG_CXX], [AC_DEFUN([_LT_PROG_CXX])]) -# pkg.m4 - Macros to locate and utilise pkg-config. -*- Autoconf -*- -# serial 1 (pkg-config-0.24) -# -# Copyright © 2004 Scott James Remnant . -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, but -# WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -# General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. -# -# As a special exception to the GNU General Public License, if you -# distribute this file as part of a program that contains a -# configuration script generated by Autoconf, you may include it under -# the same distribution terms that you use for the rest of that program. +# pkg.m4 - Macros to locate and utilise pkg-config. -*- Autoconf -*- +# serial 11 (pkg-config-0.29.1) -# PKG_PROG_PKG_CONFIG([MIN-VERSION]) -# ---------------------------------- +dnl Copyright © 2004 Scott James Remnant . +dnl Copyright © 2012-2015 Dan Nicholson +dnl +dnl This program is free software; you can redistribute it and/or modify +dnl it under the terms of the GNU General Public License as published by +dnl the Free Software Foundation; either version 2 of the License, or +dnl (at your option) any later version. +dnl +dnl This program is distributed in the hope that it will be useful, but +dnl WITHOUT ANY WARRANTY; without even the implied warranty of +dnl MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +dnl General Public License for more details. +dnl +dnl You should have received a copy of the GNU General Public License +dnl along with this program; if not, write to the Free Software +dnl Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA +dnl 02111-1307, USA. +dnl +dnl As a special exception to the GNU General Public License, if you +dnl distribute this file as part of a program that contains a +dnl configuration script generated by Autoconf, you may include it under +dnl the same distribution terms that you use for the rest of that +dnl program. + +dnl PKG_PREREQ(MIN-VERSION) +dnl ----------------------- +dnl Since: 0.29 +dnl +dnl Verify that the version of the pkg-config macros are at least +dnl MIN-VERSION. Unlike PKG_PROG_PKG_CONFIG, which checks the user's +dnl installed version of pkg-config, this checks the developer's version +dnl of pkg.m4 when generating configure. +dnl +dnl To ensure that this macro is defined, also add: +dnl m4_ifndef([PKG_PREREQ], +dnl [m4_fatal([must install pkg-config 0.29 or later before running autoconf/autogen])]) +dnl +dnl See the "Since" comment for each macro you use to see what version +dnl of the macros you require. +m4_defun([PKG_PREREQ], +[m4_define([PKG_MACROS_VERSION], [0.29.1]) +m4_if(m4_version_compare(PKG_MACROS_VERSION, [$1]), -1, + [m4_fatal([pkg.m4 version $1 or higher is required but ]PKG_MACROS_VERSION[ found])]) +])dnl PKG_PREREQ + +dnl PKG_PROG_PKG_CONFIG([MIN-VERSION]) +dnl ---------------------------------- +dnl Since: 0.16 +dnl +dnl Search for the pkg-config tool and set the PKG_CONFIG variable to +dnl first found in the path. Checks that the version of pkg-config found +dnl is at least MIN-VERSION. If MIN-VERSION is not specified, 0.9.0 is +dnl used since that's the first version where most current features of +dnl pkg-config existed. AC_DEFUN([PKG_PROG_PKG_CONFIG], [m4_pattern_forbid([^_?PKG_[A-Z_]+$]) m4_pattern_allow([^PKG_CONFIG(_(PATH|LIBDIR|SYSROOT_DIR|ALLOW_SYSTEM_(CFLAGS|LIBS)))?$]) @@ -9096,18 +9152,19 @@ PKG_CONFIG="" fi fi[]dnl -])# PKG_PROG_PKG_CONFIG +])dnl PKG_PROG_PKG_CONFIG -# PKG_CHECK_EXISTS(MODULES, [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND]) -# -# Check to see whether a particular set of modules exists. Similar -# to PKG_CHECK_MODULES(), but does not set variables or print errors. -# -# Please remember that m4 expands AC_REQUIRE([PKG_PROG_PKG_CONFIG]) -# only at the first occurence in configure.ac, so if the first place -# it's called might be skipped (such as if it is within an "if", you -# have to call PKG_CHECK_EXISTS manually -# -------------------------------------------------------------- +dnl PKG_CHECK_EXISTS(MODULES, [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND]) +dnl ------------------------------------------------------------------- +dnl Since: 0.18 +dnl +dnl Check to see whether a particular set of modules exists. Similar to +dnl PKG_CHECK_MODULES(), but does not set variables or print errors. +dnl +dnl Please remember that m4 expands AC_REQUIRE([PKG_PROG_PKG_CONFIG]) +dnl only at the first occurence in configure.ac, so if the first place +dnl it's called might be skipped (such as if it is within an "if", you +dnl have to call PKG_CHECK_EXISTS manually AC_DEFUN([PKG_CHECK_EXISTS], [AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl if test -n "$PKG_CONFIG" && \ @@ -9117,8 +9174,10 @@ $3])dnl fi]) -# _PKG_CONFIG([VARIABLE], [COMMAND], [MODULES]) -# --------------------------------------------- +dnl _PKG_CONFIG([VARIABLE], [COMMAND], [MODULES]) +dnl --------------------------------------------- +dnl Internal wrapper calling pkg-config via PKG_CONFIG and setting +dnl pkg_failed based on the result. m4_define([_PKG_CONFIG], [if test -n "$$1"; then pkg_cv_[]$1="$$1" @@ -9130,10 +9189,11 @@ else pkg_failed=untried fi[]dnl -])# _PKG_CONFIG +])dnl _PKG_CONFIG -# _PKG_SHORT_ERRORS_SUPPORTED -# ----------------------------- +dnl _PKG_SHORT_ERRORS_SUPPORTED +dnl --------------------------- +dnl Internal check to see if pkg-config supports short errors. AC_DEFUN([_PKG_SHORT_ERRORS_SUPPORTED], [AC_REQUIRE([PKG_PROG_PKG_CONFIG]) if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then @@ -9141,19 +9201,17 @@ else _pkg_short_errors_supported=no fi[]dnl -])# _PKG_SHORT_ERRORS_SUPPORTED +])dnl _PKG_SHORT_ERRORS_SUPPORTED -# PKG_CHECK_MODULES(VARIABLE-PREFIX, MODULES, [ACTION-IF-FOUND], -# [ACTION-IF-NOT-FOUND]) -# -# -# Note that if there is a possibility the first call to -# PKG_CHECK_MODULES might not happen, you should be sure to include an -# explicit call to PKG_PROG_PKG_CONFIG in your configure.ac -# -# -# -------------------------------------------------------------- +dnl PKG_CHECK_MODULES(VARIABLE-PREFIX, MODULES, [ACTION-IF-FOUND], +dnl [ACTION-IF-NOT-FOUND]) +dnl -------------------------------------------------------------- +dnl Since: 0.4.0 +dnl +dnl Note that if there is a possibility the first call to +dnl PKG_CHECK_MODULES might not happen, you should be sure to include an +dnl explicit call to PKG_PROG_PKG_CONFIG in your configure.ac AC_DEFUN([PKG_CHECK_MODULES], [AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl AC_ARG_VAR([$1][_CFLAGS], [C compiler flags for $1, overriding pkg-config])dnl @@ -9207,16 +9265,40 @@ AC_MSG_RESULT([yes]) $3 fi[]dnl -])# PKG_CHECK_MODULES +])dnl PKG_CHECK_MODULES -# PKG_INSTALLDIR(DIRECTORY) -# ------------------------- -# Substitutes the variable pkgconfigdir as the location where a module -# should install pkg-config .pc files. By default the directory is -# $libdir/pkgconfig, but the default can be changed by passing -# DIRECTORY. The user can override through the --with-pkgconfigdir -# parameter. +dnl PKG_CHECK_MODULES_STATIC(VARIABLE-PREFIX, MODULES, [ACTION-IF-FOUND], +dnl [ACTION-IF-NOT-FOUND]) +dnl --------------------------------------------------------------------- +dnl Since: 0.29 +dnl +dnl Checks for existence of MODULES and gathers its build flags with +dnl static libraries enabled. Sets VARIABLE-PREFIX_CFLAGS from --cflags +dnl and VARIABLE-PREFIX_LIBS from --libs. +dnl +dnl Note that if there is a possibility the first call to +dnl PKG_CHECK_MODULES_STATIC might not happen, you should be sure to +dnl include an explicit call to PKG_PROG_PKG_CONFIG in your +dnl configure.ac. +AC_DEFUN([PKG_CHECK_MODULES_STATIC], +[AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl +_save_PKG_CONFIG=$PKG_CONFIG +PKG_CONFIG="$PKG_CONFIG --static" +PKG_CHECK_MODULES($@) +PKG_CONFIG=$_save_PKG_CONFIG[]dnl +])dnl PKG_CHECK_MODULES_STATIC + + +dnl PKG_INSTALLDIR([DIRECTORY]) +dnl ------------------------- +dnl Since: 0.27 +dnl +dnl Substitutes the variable pkgconfigdir as the location where a module +dnl should install pkg-config .pc files. By default the directory is +dnl $libdir/pkgconfig, but the default can be changed by passing +dnl DIRECTORY. The user can override through the --with-pkgconfigdir +dnl parameter. AC_DEFUN([PKG_INSTALLDIR], [m4_pushdef([pkg_default], [m4_default([$1], ['${libdir}/pkgconfig'])]) m4_pushdef([pkg_description], @@ -9227,16 +9309,18 @@ AC_SUBST([pkgconfigdir], [$with_pkgconfigdir]) m4_popdef([pkg_default]) m4_popdef([pkg_description]) -]) dnl PKG_INSTALLDIR +])dnl PKG_INSTALLDIR -# PKG_NOARCH_INSTALLDIR(DIRECTORY) -# ------------------------- -# Substitutes the variable noarch_pkgconfigdir as the location where a -# module should install arch-independent pkg-config .pc files. By -# default the directory is $datadir/pkgconfig, but the default can be -# changed by passing DIRECTORY. The user can override through the -# --with-noarch-pkgconfigdir parameter. +dnl PKG_NOARCH_INSTALLDIR([DIRECTORY]) +dnl -------------------------------- +dnl Since: 0.27 +dnl +dnl Substitutes the variable noarch_pkgconfigdir as the location where a +dnl module should install arch-independent pkg-config .pc files. By +dnl default the directory is $datadir/pkgconfig, but the default can be +dnl changed by passing DIRECTORY. The user can override through the +dnl --with-noarch-pkgconfigdir parameter. AC_DEFUN([PKG_NOARCH_INSTALLDIR], [m4_pushdef([pkg_default], [m4_default([$1], ['${datadir}/pkgconfig'])]) m4_pushdef([pkg_description], @@ -9247,13 +9331,15 @@ AC_SUBST([noarch_pkgconfigdir], [$with_noarch_pkgconfigdir]) m4_popdef([pkg_default]) m4_popdef([pkg_description]) -]) dnl PKG_NOARCH_INSTALLDIR +])dnl PKG_NOARCH_INSTALLDIR -# PKG_CHECK_VAR(VARIABLE, MODULE, CONFIG-VARIABLE, -# [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND]) -# ------------------------------------------- -# Retrieves the value of the pkg-config variable for the given module. +dnl PKG_CHECK_VAR(VARIABLE, MODULE, CONFIG-VARIABLE, +dnl [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND]) +dnl ------------------------------------------- +dnl Since: 0.28 +dnl +dnl Retrieves the value of the pkg-config variable for the given module. AC_DEFUN([PKG_CHECK_VAR], [AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl AC_ARG_VAR([$1], [value of $3 for $2, overriding pkg-config])dnl @@ -9262,9 +9348,77 @@ AS_VAR_COPY([$1], [pkg_cv_][$1]) AS_VAR_IF([$1], [""], [$5], [$4])dnl -])# PKG_CHECK_VAR +])dnl PKG_CHECK_VAR + +dnl PKG_WITH_MODULES(VARIABLE-PREFIX, MODULES, +dnl [ACTION-IF-FOUND],[ACTION-IF-NOT-FOUND], +dnl [DESCRIPTION], [DEFAULT]) +dnl ------------------------------------------ +dnl +dnl Prepare a "--with-" configure option using the lowercase +dnl [VARIABLE-PREFIX] name, merging the behaviour of AC_ARG_WITH and +dnl PKG_CHECK_MODULES in a single macro. +AC_DEFUN([PKG_WITH_MODULES], +[ +m4_pushdef([with_arg], m4_tolower([$1])) + +m4_pushdef([description], + [m4_default([$5], [build with ]with_arg[ support])]) + +m4_pushdef([def_arg], [m4_default([$6], [auto])]) +m4_pushdef([def_action_if_found], [AS_TR_SH([with_]with_arg)=yes]) +m4_pushdef([def_action_if_not_found], [AS_TR_SH([with_]with_arg)=no]) + +m4_case(def_arg, + [yes],[m4_pushdef([with_without], [--without-]with_arg)], + [m4_pushdef([with_without],[--with-]with_arg)]) + +AC_ARG_WITH(with_arg, + AS_HELP_STRING(with_without, description[ @<:@default=]def_arg[@:>@]),, + [AS_TR_SH([with_]with_arg)=def_arg]) + +AS_CASE([$AS_TR_SH([with_]with_arg)], + [yes],[PKG_CHECK_MODULES([$1],[$2],$3,$4)], + [auto],[PKG_CHECK_MODULES([$1],[$2], + [m4_n([def_action_if_found]) $3], + [m4_n([def_action_if_not_found]) $4])]) + +m4_popdef([with_arg]) +m4_popdef([description]) +m4_popdef([def_arg]) + +])dnl PKG_WITH_MODULES + +dnl PKG_HAVE_WITH_MODULES(VARIABLE-PREFIX, MODULES, +dnl [DESCRIPTION], [DEFAULT]) +dnl ----------------------------------------------- +dnl +dnl Convenience macro to trigger AM_CONDITIONAL after PKG_WITH_MODULES +dnl check._[VARIABLE-PREFIX] is exported as make variable. +AC_DEFUN([PKG_HAVE_WITH_MODULES], +[ +PKG_WITH_MODULES([$1],[$2],,,[$3],[$4]) -# Copyright (C) 2002-2014 Free Software Foundation, Inc. +AM_CONDITIONAL([HAVE_][$1], + [test "$AS_TR_SH([with_]m4_tolower([$1]))" = "yes"]) +])dnl PKG_HAVE_WITH_MODULES + +dnl PKG_HAVE_DEFINE_WITH_MODULES(VARIABLE-PREFIX, MODULES, +dnl [DESCRIPTION], [DEFAULT]) +dnl ------------------------------------------------------ +dnl +dnl Convenience macro to run AM_CONDITIONAL and AC_DEFINE after +dnl PKG_WITH_MODULES check. HAVE_[VARIABLE-PREFIX] is exported as make +dnl and preprocessor variable. +AC_DEFUN([PKG_HAVE_DEFINE_WITH_MODULES], +[ +PKG_HAVE_WITH_MODULES([$1],[$2],[$3],[$4]) + +AS_IF([test "$AS_TR_SH([with_]m4_tolower([$1]))" = "yes"], + [AC_DEFINE([HAVE_][$1], 1, [Enable ]m4_tolower([$1])[ support])]) +])dnl PKG_HAVE_DEFINE_WITH_MODULES + +# Copyright (C) 2002-2018 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -9276,10 +9430,10 @@ # generated from the m4 files accompanying Automake X.Y. # (This private macro should not be called outside this file.) AC_DEFUN([AM_AUTOMAKE_VERSION], -[am__api_version='1.15' +[am__api_version='1.16' dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to dnl require some minimum version. Point them to the right macro. -m4_if([$1], [1.15], [], +m4_if([$1], [1.16.1], [], [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl ]) @@ -9295,14 +9449,14 @@ # Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced. # This function is AC_REQUIREd by AM_INIT_AUTOMAKE. AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION], -[AM_AUTOMAKE_VERSION([1.15])dnl +[AM_AUTOMAKE_VERSION([1.16.1])dnl m4_ifndef([AC_AUTOCONF_VERSION], [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl _AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))]) # AM_AUX_DIR_EXPAND -*- Autoconf -*- -# Copyright (C) 2001-2014 Free Software Foundation, Inc. +# Copyright (C) 2001-2018 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -9354,7 +9508,7 @@ # AM_CONDITIONAL -*- Autoconf -*- -# Copyright (C) 1997-2014 Free Software Foundation, Inc. +# Copyright (C) 1997-2018 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -9385,7 +9539,7 @@ Usually this means the macro was only invoked conditionally.]]) fi])]) -# Copyright (C) 1999-2014 Free Software Foundation, Inc. +# Copyright (C) 1999-2018 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -9576,13 +9730,12 @@ # Generate code to set up dependency tracking. -*- Autoconf -*- -# Copyright (C) 1999-2014 Free Software Foundation, Inc. +# Copyright (C) 1999-2018 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. - # _AM_OUTPUT_DEPENDENCY_COMMANDS # ------------------------------ AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS], @@ -9590,49 +9743,41 @@ # Older Autoconf quotes --file arguments for eval, but not when files # are listed without --file. Let's play safe and only enable the eval # if we detect the quoting. - case $CONFIG_FILES in - *\'*) eval set x "$CONFIG_FILES" ;; - *) set x $CONFIG_FILES ;; - esac + # TODO: see whether this extra hack can be removed once we start + # requiring Autoconf 2.70 or later. + AS_CASE([$CONFIG_FILES], + [*\'*], [eval set x "$CONFIG_FILES"], + [*], [set x $CONFIG_FILES]) shift - for mf + # Used to flag and report bootstrapping failures. + am_rc=0 + for am_mf do # Strip MF so we end up with the name of the file. - mf=`echo "$mf" | sed -e 's/:.*$//'` - # Check whether this is an Automake generated Makefile or not. - # We used to match only the files named 'Makefile.in', but - # some people rename them; so instead we look at the file content. - # Grep'ing the first line is not enough: some people post-process - # each Makefile.in and add a new line on top of each file to say so. - # Grep'ing the whole file is not good either: AIX grep has a line + am_mf=`AS_ECHO(["$am_mf"]) | sed -e 's/:.*$//'` + # Check whether this is an Automake generated Makefile which includes + # dependency-tracking related rules and includes. + # Grep'ing the whole file directly is not great: AIX grep has a line # limit of 2048, but all sed's we know have understand at least 4000. - if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then - dirpart=`AS_DIRNAME("$mf")` - else - continue - fi - # Extract the definition of DEPDIR, am__include, and am__quote - # from the Makefile without running 'make'. - DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` - test -z "$DEPDIR" && continue - am__include=`sed -n 's/^am__include = //p' < "$mf"` - test -z "$am__include" && continue - am__quote=`sed -n 's/^am__quote = //p' < "$mf"` - # Find all dependency output files, they are included files with - # $(DEPDIR) in their names. We invoke sed twice because it is the - # simplest approach to changing $(DEPDIR) to its actual value in the - # expansion. - for file in `sed -n " - s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ - sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g'`; do - # Make sure the directory exists. - test -f "$dirpart/$file" && continue - fdir=`AS_DIRNAME(["$file"])` - AS_MKDIR_P([$dirpart/$fdir]) - # echo "creating $dirpart/$file" - echo '# dummy' > "$dirpart/$file" - done + sed -n 's,^am--depfiles:.*,X,p' "$am_mf" | grep X >/dev/null 2>&1 \ + || continue + am_dirpart=`AS_DIRNAME(["$am_mf"])` + am_filepart=`AS_BASENAME(["$am_mf"])` + AM_RUN_LOG([cd "$am_dirpart" \ + && sed -e '/# am--include-marker/d' "$am_filepart" \ + | $MAKE -f - am--depfiles]) || am_rc=$? done + if test $am_rc -ne 0; then + AC_MSG_FAILURE([Something went wrong bootstrapping makefile fragments + for automatic dependency tracking. Try re-running configure with the + '--disable-dependency-tracking' option to at least be able to build + the package (albeit without support for automatic dependency tracking).]) + fi + AS_UNSET([am_dirpart]) + AS_UNSET([am_filepart]) + AS_UNSET([am_mf]) + AS_UNSET([am_rc]) + rm -f conftest-deps.mk } ])# _AM_OUTPUT_DEPENDENCY_COMMANDS @@ -9641,18 +9786,17 @@ # ----------------------------- # This macro should only be invoked once -- use via AC_REQUIRE. # -# This code is only required when automatic dependency tracking -# is enabled. FIXME. This creates each '.P' file that we will -# need in order to bootstrap the dependency handling code. +# This code is only required when automatic dependency tracking is enabled. +# This creates each '.Po' and '.Plo' makefile fragment that we'll need in +# order to bootstrap the dependency handling code. AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS], [AC_CONFIG_COMMANDS([depfiles], [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS], - [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"]) -]) + [AMDEP_TRUE="$AMDEP_TRUE" MAKE="${MAKE-make}"])]) # Do all the work for Automake. -*- Autoconf -*- -# Copyright (C) 1996-2014 Free Software Foundation, Inc. +# Copyright (C) 1996-2018 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -9739,8 +9883,8 @@ AC_REQUIRE([AC_PROG_MKDIR_P])dnl # For better backward compatibility. To be removed once Automake 1.9.x # dies out for good. For more background, see: -# -# +# +# AC_SUBST([mkdir_p], ['$(MKDIR_P)']) # We need awk for the "check" target (and possibly the TAP driver). The # system "awk" is bad on some platforms. @@ -9807,7 +9951,7 @@ Aborting the configuration process, to ensure you take notice of the issue. You can download and install GNU coreutils to get an 'rm' implementation -that behaves properly: . +that behaves properly: . If you want to complete the configuration process using your problematic 'rm' anyway, export the environment variable ACCEPT_INFERIOR_RM_PROGRAM @@ -9849,7 +9993,7 @@ done echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count]) -# Copyright (C) 2001-2014 Free Software Foundation, Inc. +# Copyright (C) 2001-2018 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -9870,7 +10014,7 @@ fi AC_SUBST([install_sh])]) -# Copyright (C) 2003-2014 Free Software Foundation, Inc. +# Copyright (C) 2003-2018 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -9891,7 +10035,7 @@ # Check to see how 'make' treats includes. -*- Autoconf -*- -# Copyright (C) 2001-2014 Free Software Foundation, Inc. +# Copyright (C) 2001-2018 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -9899,49 +10043,42 @@ # AM_MAKE_INCLUDE() # ----------------- -# Check to see how make treats includes. +# Check whether make has an 'include' directive that can support all +# the idioms we need for our automatic dependency tracking code. AC_DEFUN([AM_MAKE_INCLUDE], -[am_make=${MAKE-make} -cat > confinc << 'END' +[AC_MSG_CHECKING([whether ${MAKE-make} supports the include directive]) +cat > confinc.mk << 'END' am__doit: - @echo this is the am__doit target + @echo this is the am__doit target >confinc.out .PHONY: am__doit END -# If we don't find an include directive, just comment out the code. -AC_MSG_CHECKING([for style of include used by $am_make]) am__include="#" am__quote= -_am_result=none -# First try GNU make style include. -echo "include confinc" > confmf -# Ignore all kinds of additional output from 'make'. -case `$am_make -s -f confmf 2> /dev/null` in #( -*the\ am__doit\ target*) - am__include=include - am__quote= - _am_result=GNU - ;; -esac -# Now try BSD make style include. -if test "$am__include" = "#"; then - echo '.include "confinc"' > confmf - case `$am_make -s -f confmf 2> /dev/null` in #( - *the\ am__doit\ target*) - am__include=.include - am__quote="\"" - _am_result=BSD - ;; - esac -fi -AC_SUBST([am__include]) -AC_SUBST([am__quote]) -AC_MSG_RESULT([$_am_result]) -rm -f confinc confmf -]) +# BSD make does it like this. +echo '.include "confinc.mk" # ignored' > confmf.BSD +# Other make implementations (GNU, Solaris 10, AIX) do it like this. +echo 'include confinc.mk # ignored' > confmf.GNU +_am_result=no +for s in GNU BSD; do + AM_RUN_LOG([${MAKE-make} -f confmf.$s && cat confinc.out]) + AS_CASE([$?:`cat confinc.out 2>/dev/null`], + ['0:this is the am__doit target'], + [AS_CASE([$s], + [BSD], [am__include='.include' am__quote='"'], + [am__include='include' am__quote=''])]) + if test "$am__include" != "#"; then + _am_result="yes ($s style)" + break + fi +done +rm -f confinc.* confmf.* +AC_MSG_RESULT([${_am_result}]) +AC_SUBST([am__include])]) +AC_SUBST([am__quote])]) # Fake the existence of programs that GNU maintainers use. -*- Autoconf -*- -# Copyright (C) 1997-2014 Free Software Foundation, Inc. +# Copyright (C) 1997-2018 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -9980,7 +10117,7 @@ # Helper functions for option handling. -*- Autoconf -*- -# Copyright (C) 2001-2014 Free Software Foundation, Inc. +# Copyright (C) 2001-2018 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -10009,7 +10146,7 @@ AC_DEFUN([_AM_IF_OPTION], [m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])]) -# Copyright (C) 1999-2014 Free Software Foundation, Inc. +# Copyright (C) 1999-2018 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -10056,7 +10193,7 @@ # For backward compatibility. AC_DEFUN_ONCE([AM_PROG_CC_C_O], [AC_REQUIRE([AC_PROG_CC])]) -# Copyright (C) 2001-2014 Free Software Foundation, Inc. +# Copyright (C) 2001-2018 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -10075,7 +10212,7 @@ # Check to make sure that the build environment is sane. -*- Autoconf -*- -# Copyright (C) 1996-2014 Free Software Foundation, Inc. +# Copyright (C) 1996-2018 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -10156,7 +10293,7 @@ rm -f conftest.file ]) -# Copyright (C) 2009-2014 Free Software Foundation, Inc. +# Copyright (C) 2009-2018 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -10216,7 +10353,7 @@ _AM_SUBST_NOTMAKE([AM_BACKSLASH])dnl ]) -# Copyright (C) 2001-2014 Free Software Foundation, Inc. +# Copyright (C) 2001-2018 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -10244,7 +10381,7 @@ INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s" AC_SUBST([INSTALL_STRIP_PROGRAM])]) -# Copyright (C) 2006-2014 Free Software Foundation, Inc. +# Copyright (C) 2006-2018 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -10263,7 +10400,7 @@ # Check how to create a tarball. -*- Autoconf -*- -# Copyright (C) 2004-2014 Free Software Foundation, Inc. +# Copyright (C) 2004-2018 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, diff -Nru libvdpau-1.1.1/ChangeLog libvdpau-1.2/ChangeLog --- libvdpau-1.1.1/ChangeLog 2015-08-31 21:00:32.000000000 +0000 +++ libvdpau-1.2/ChangeLog 2019-02-28 18:43:10.000000000 +0000 @@ -1,3 +1,117 @@ +commit 1b468dea984207a3fad4fdf4f6648f62300b2936 +Author: ManojGuptaBonda +Date: Mon Dec 31 17:02:30 2018 +0530 + + Add HEVC 444 support in VDPAU API + + Added new VdpPictureInfoHEVC444 structure for HEVC444 support. + having the SPS,PPS range extension variables that are defined for HEVC + 444. VdpPictureInfoHEVC is part of VdpPictureInfoHEVC444. + + New VdpYCbCr Formats are added to be used in get/putbits for YUV 4:4:4 + surfaces. + + Added the capability bits for chromatypes supported. + + Add support to return the supported chroma types in + VdpDecoderQueryProfileCapability API. The supported chroma types + are returned in a bitmask. + + Signed-off-by: Aaron Plattner + +commit 52a6ea26bae0c4b2c5bace65dd7cc09c8e677bda +Author: Aaron Plattner +Date: Tue Nov 20 11:10:36 2018 -0800 + + Fix typos from commit 53eeb07f68d483fee86ad872884aee890d5aa393 + + Signed-off-by: Aaron Plattner + +commit 53eeb07f68d483fee86ad872884aee890d5aa393 +Author: ManojGuptaBonda +Date: Tue Nov 20 13:29:37 2018 +0530 + + Add new frame and field mode chroma types. Add VdpDecoderQueryProfileCapability API + + Chroma types : + VDP_CHROMA_TYPE_420 + VDP_CHROMA_TYPE_422 + VDP_CHROMA_TYPE_444 + + already exist, surfaces of these types could be transparently used with + any VdpVideoDecoder. The implementation is free to internally convert + the surface between frame/field(NV12/NV24) as required by + VdpVideoDecoder operation. The interop API would allow registration of + these surfaces for either field or frame based interop. + + This change adds new enums for frame and field chroma types: + VDP_CHROMA_TYPE_420_FIELD + VDP_CHROMA_TYPE_422_FIELD + VDP_CHROMA_TYPE_444_FIELD + VDP_CHROMA_TYPE_420_FRAME + VDP_CHROMA_TYPE_422_FRAME + VDP_CHROMA_TYPE_444_FRAME + + So that frame/field based video surfaces can be created and exposed via + VDPAU OpenGL interop. + + The new chroma types could only be used by a VdpVideoDecoder that + supports output to field/frame surfaces respectively. Internal surface + convertion is not allowed. The interop API would allow registration + of these surfaces to field/frame based interop only. This will avoid + implicit conversions and allocation of shadow surface. + + Existing VdpDecoderQueryCapabilities() returns maxlevel, maxwidth, + height and macro blocks for a given decoder profile. Since it is not + possible to extend this API to return more capabilities, adding new API + VdpDecoderQueryProfileCapability(). In this change, new API will be able + to return supported picture structure along with other existing + capabilities. + + VdpDecoderQueryProfileCapability() can be extended in future to query + newer capabilities exposed. VdpDecoderCapabilities defines the + capabilities that can be queried. + + This function returns queried capability of the requested profile on the + underlying h/w. By design, only one capability can be queried at a time. + + Signed-off-by: Manoj Bonda + Signed-off-by: Aaron Plattner + +commit a21bf7aa438f5dd40d0a300a3167aa3d6f26dccc +Author: José Hiram Soltren +Date: Wed Sep 9 15:05:01 2015 -0500 + + Fix doc error on displayable surface types + + VdpVideoSurface is not directly displayable in the current + implementation of VDPAU. VdpOutputSurface is. Make the documentation + consistent with reality. + + Signed-off-by: Aaron Plattner + +commit fb5362be7a6d6f89f76c5e171c339f5fa1916d38 +Author: Aaron Plattner +Date: Mon Sep 7 21:16:58 2015 -0700 + + util.h: Make getenv_wrapper() static inline + + Otherwise, GCC generates a "‘getenv_wrapper’ defined but not used" warning. + + Signed-off-by: Aaron Plattner + +commit 1cda354bdfd0c9ca107293b84b52f4464fdbedcc +Author: Rico Tzschichholz +Date: Tue Sep 1 10:45:11 2015 +0200 + + mesa_dri2: Add missing include of config.h to define _GNU_SOURCE + + Fix build with -Wimplicit-function-declaration while secure_getenv() is + guarded by __USE_GNU. + + Reviewed-by: Aaron Plattner + Tested-by: Stefan Dirsch + commit af517f56d64118520aa0c8456318dd9ec3307e94 Author: Aaron Plattner Date: Mon Aug 31 13:59:50 2015 -0700 diff -Nru libvdpau-1.1.1/compile libvdpau-1.2/compile --- libvdpau-1.1.1/compile 2015-08-31 21:00:08.000000000 +0000 +++ libvdpau-1.2/compile 2019-02-28 18:40:58.000000000 +0000 @@ -1,9 +1,9 @@ #! /bin/sh # Wrapper for compilers which do not understand '-c -o'. -scriptversion=2012-10-14.11; # UTC +scriptversion=2018-03-07.03; # UTC -# Copyright (C) 1999-2014 Free Software Foundation, Inc. +# Copyright (C) 1999-2018 Free Software Foundation, Inc. # Written by Tom Tromey . # # This program is free software; you can redistribute it and/or modify @@ -17,7 +17,7 @@ # GNU General Public License for more details. # # You should have received a copy of the GNU General Public License -# along with this program. If not, see . +# along with this program. If not, see . # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a @@ -255,7 +255,8 @@ echo "compile $scriptversion" exit $? ;; - cl | *[/\\]cl | cl.exe | *[/\\]cl.exe ) + cl | *[/\\]cl | cl.exe | *[/\\]cl.exe | \ + icl | *[/\\]icl | icl.exe | *[/\\]icl.exe ) func_cl_wrapper "$@" # Doesn't return... ;; esac @@ -339,9 +340,9 @@ # Local Variables: # mode: shell-script # sh-indentation: 2 -# eval: (add-hook 'write-file-hooks 'time-stamp) +# eval: (add-hook 'before-save-hook 'time-stamp) # time-stamp-start: "scriptversion=" # time-stamp-format: "%:y-%02m-%02d.%02H" -# time-stamp-time-zone: "UTC" +# time-stamp-time-zone: "UTC0" # time-stamp-end: "; # UTC" # End: diff -Nru libvdpau-1.1.1/config.guess libvdpau-1.2/config.guess --- libvdpau-1.1.1/config.guess 2015-08-31 21:00:08.000000000 +0000 +++ libvdpau-1.2/config.guess 2019-02-28 18:40:58.000000000 +0000 @@ -1,8 +1,8 @@ #! /bin/sh # Attempt to guess a canonical system name. -# Copyright 1992-2014 Free Software Foundation, Inc. +# Copyright 1992-2018 Free Software Foundation, Inc. -timestamp='2014-11-04' +timestamp='2018-03-08' # This file is free software; you can redistribute it and/or modify it # under the terms of the GNU General Public License as published by @@ -15,7 +15,7 @@ # General Public License for more details. # # You should have received a copy of the GNU General Public License -# along with this program; if not, see . +# along with this program; if not, see . # # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a @@ -27,7 +27,7 @@ # Originally written by Per Bothner; maintained since 2000 by Ben Elliston. # # You can get the latest version of this script from: -# http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess;hb=HEAD +# https://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess # # Please send patches to . @@ -39,7 +39,7 @@ Output the configuration name of the system \`$me' is run on. -Operation modes: +Options: -h, --help print this help, then exit -t, --time-stamp print date of last modification, then exit -v, --version print version number, then exit @@ -50,7 +50,7 @@ GNU config.guess ($timestamp) Originally written by Per Bothner. -Copyright 1992-2014 Free Software Foundation, Inc. +Copyright 1992-2018 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." @@ -107,9 +107,9 @@ dummy=$tmp/dummy ; tmpfiles="$dummy.c $dummy.o $dummy.rel $dummy" ; case $CC_FOR_BUILD,$HOST_CC,$CC in - ,,) echo "int x;" > $dummy.c ; + ,,) echo "int x;" > "$dummy.c" ; for c in cc gcc c89 c99 ; do - if ($c -c -o $dummy.o $dummy.c) >/dev/null 2>&1 ; then + if ($c -c -o "$dummy.o" "$dummy.c") >/dev/null 2>&1 ; then CC_FOR_BUILD="$c"; break ; fi ; done ; @@ -132,14 +132,14 @@ UNAME_SYSTEM=`(uname -s) 2>/dev/null` || UNAME_SYSTEM=unknown UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown -case "${UNAME_SYSTEM}" in +case "$UNAME_SYSTEM" in Linux|GNU|GNU/*) # If the system lacks a compiler, then just pick glibc. # We could probably try harder. LIBC=gnu - eval $set_cc_for_build - cat <<-EOF > $dummy.c + eval "$set_cc_for_build" + cat <<-EOF > "$dummy.c" #include #if defined(__UCLIBC__) LIBC=uclibc @@ -149,13 +149,20 @@ LIBC=gnu #endif EOF - eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^LIBC' | sed 's, ,,g'` + eval "`$CC_FOR_BUILD -E "$dummy.c" 2>/dev/null | grep '^LIBC' | sed 's, ,,g'`" + + # If ldd exists, use it to detect musl libc. + if command -v ldd >/dev/null && \ + ldd --version 2>&1 | grep -q ^musl + then + LIBC=musl + fi ;; esac # Note: order is significant - the case branches are not exclusive. -case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in +case "$UNAME_MACHINE:$UNAME_SYSTEM:$UNAME_RELEASE:$UNAME_VERSION" in *:NetBSD:*:*) # NetBSD (nbsd) targets should (where applicable) match one or # more of the tuples: *-*-netbsdelf*, *-*-netbsdaout*, @@ -168,21 +175,31 @@ # Note: NetBSD doesn't particularly care about the vendor # portion of the name. We always set it to "unknown". sysctl="sysctl -n hw.machine_arch" - UNAME_MACHINE_ARCH=`(/sbin/$sysctl 2>/dev/null || \ - /usr/sbin/$sysctl 2>/dev/null || echo unknown)` - case "${UNAME_MACHINE_ARCH}" in + UNAME_MACHINE_ARCH=`(uname -p 2>/dev/null || \ + "/sbin/$sysctl" 2>/dev/null || \ + "/usr/sbin/$sysctl" 2>/dev/null || \ + echo unknown)` + case "$UNAME_MACHINE_ARCH" in armeb) machine=armeb-unknown ;; arm*) machine=arm-unknown ;; sh3el) machine=shl-unknown ;; sh3eb) machine=sh-unknown ;; sh5el) machine=sh5le-unknown ;; - *) machine=${UNAME_MACHINE_ARCH}-unknown ;; + earmv*) + arch=`echo "$UNAME_MACHINE_ARCH" | sed -e 's,^e\(armv[0-9]\).*$,\1,'` + endian=`echo "$UNAME_MACHINE_ARCH" | sed -ne 's,^.*\(eb\)$,\1,p'` + machine="${arch}${endian}"-unknown + ;; + *) machine="$UNAME_MACHINE_ARCH"-unknown ;; esac # The Operating System including object format, if it has switched - # to ELF recently, or will in the future. - case "${UNAME_MACHINE_ARCH}" in + # to ELF recently (or will in the future) and ABI. + case "$UNAME_MACHINE_ARCH" in + earm*) + os=netbsdelf + ;; arm*|i386|m68k|ns32k|sh3*|sparc|vax) - eval $set_cc_for_build + eval "$set_cc_for_build" if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \ | grep -q __ELF__ then @@ -197,44 +214,67 @@ os=netbsd ;; esac + # Determine ABI tags. + case "$UNAME_MACHINE_ARCH" in + earm*) + expr='s/^earmv[0-9]/-eabi/;s/eb$//' + abi=`echo "$UNAME_MACHINE_ARCH" | sed -e "$expr"` + ;; + esac # The OS release # Debian GNU/NetBSD machines have a different userland, and # thus, need a distinct triplet. However, they do not need # kernel version information, so it can be replaced with a # suitable tag, in the style of linux-gnu. - case "${UNAME_VERSION}" in + case "$UNAME_VERSION" in Debian*) release='-gnu' ;; *) - release=`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'` + release=`echo "$UNAME_RELEASE" | sed -e 's/[-_].*//' | cut -d. -f1,2` ;; esac # Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM: # contains redundant information, the shorter form: # CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used. - echo "${machine}-${os}${release}" + echo "$machine-${os}${release}${abi}" exit ;; *:Bitrig:*:*) UNAME_MACHINE_ARCH=`arch | sed 's/Bitrig.//'` - echo ${UNAME_MACHINE_ARCH}-unknown-bitrig${UNAME_RELEASE} + echo "$UNAME_MACHINE_ARCH"-unknown-bitrig"$UNAME_RELEASE" exit ;; *:OpenBSD:*:*) UNAME_MACHINE_ARCH=`arch | sed 's/OpenBSD.//'` - echo ${UNAME_MACHINE_ARCH}-unknown-openbsd${UNAME_RELEASE} + echo "$UNAME_MACHINE_ARCH"-unknown-openbsd"$UNAME_RELEASE" + exit ;; + *:LibertyBSD:*:*) + UNAME_MACHINE_ARCH=`arch | sed 's/^.*BSD\.//'` + echo "$UNAME_MACHINE_ARCH"-unknown-libertybsd"$UNAME_RELEASE" + exit ;; + *:MidnightBSD:*:*) + echo "$UNAME_MACHINE"-unknown-midnightbsd"$UNAME_RELEASE" exit ;; *:ekkoBSD:*:*) - echo ${UNAME_MACHINE}-unknown-ekkobsd${UNAME_RELEASE} + echo "$UNAME_MACHINE"-unknown-ekkobsd"$UNAME_RELEASE" exit ;; *:SolidBSD:*:*) - echo ${UNAME_MACHINE}-unknown-solidbsd${UNAME_RELEASE} + echo "$UNAME_MACHINE"-unknown-solidbsd"$UNAME_RELEASE" exit ;; macppc:MirBSD:*:*) - echo powerpc-unknown-mirbsd${UNAME_RELEASE} + echo powerpc-unknown-mirbsd"$UNAME_RELEASE" exit ;; *:MirBSD:*:*) - echo ${UNAME_MACHINE}-unknown-mirbsd${UNAME_RELEASE} + echo "$UNAME_MACHINE"-unknown-mirbsd"$UNAME_RELEASE" exit ;; + *:Sortix:*:*) + echo "$UNAME_MACHINE"-unknown-sortix + exit ;; + *:Redox:*:*) + echo "$UNAME_MACHINE"-unknown-redox + exit ;; + mips:OSF1:*.*) + echo mips-dec-osf1 + exit ;; alpha:OSF1:*:*) case $UNAME_RELEASE in *4.0) @@ -251,63 +291,54 @@ ALPHA_CPU_TYPE=`/usr/sbin/psrinfo -v | sed -n -e 's/^ The alpha \(.*\) processor.*$/\1/p' | head -n 1` case "$ALPHA_CPU_TYPE" in "EV4 (21064)") - UNAME_MACHINE="alpha" ;; + UNAME_MACHINE=alpha ;; "EV4.5 (21064)") - UNAME_MACHINE="alpha" ;; + UNAME_MACHINE=alpha ;; "LCA4 (21066/21068)") - UNAME_MACHINE="alpha" ;; + UNAME_MACHINE=alpha ;; "EV5 (21164)") - UNAME_MACHINE="alphaev5" ;; + UNAME_MACHINE=alphaev5 ;; "EV5.6 (21164A)") - UNAME_MACHINE="alphaev56" ;; + UNAME_MACHINE=alphaev56 ;; "EV5.6 (21164PC)") - UNAME_MACHINE="alphapca56" ;; + UNAME_MACHINE=alphapca56 ;; "EV5.7 (21164PC)") - UNAME_MACHINE="alphapca57" ;; + UNAME_MACHINE=alphapca57 ;; "EV6 (21264)") - UNAME_MACHINE="alphaev6" ;; + UNAME_MACHINE=alphaev6 ;; "EV6.7 (21264A)") - UNAME_MACHINE="alphaev67" ;; + UNAME_MACHINE=alphaev67 ;; "EV6.8CB (21264C)") - UNAME_MACHINE="alphaev68" ;; + UNAME_MACHINE=alphaev68 ;; "EV6.8AL (21264B)") - UNAME_MACHINE="alphaev68" ;; + UNAME_MACHINE=alphaev68 ;; "EV6.8CX (21264D)") - UNAME_MACHINE="alphaev68" ;; + UNAME_MACHINE=alphaev68 ;; "EV6.9A (21264/EV69A)") - UNAME_MACHINE="alphaev69" ;; + UNAME_MACHINE=alphaev69 ;; "EV7 (21364)") - UNAME_MACHINE="alphaev7" ;; + UNAME_MACHINE=alphaev7 ;; "EV7.9 (21364A)") - UNAME_MACHINE="alphaev79" ;; + UNAME_MACHINE=alphaev79 ;; esac # A Pn.n version is a patched version. # A Vn.n version is a released version. # A Tn.n version is a released field test version. # A Xn.n version is an unreleased experimental baselevel. # 1.2 uses "1.2" for uname -r. - echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[PVTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'` + echo "$UNAME_MACHINE"-dec-osf"`echo "$UNAME_RELEASE" | sed -e 's/^[PVTX]//' | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz`" # Reset EXIT trap before exiting to avoid spurious non-zero exit code. exitcode=$? trap '' 0 exit $exitcode ;; - Alpha\ *:Windows_NT*:*) - # How do we know it's Interix rather than the generic POSIX subsystem? - # Should we change UNAME_MACHINE based on the output of uname instead - # of the specific Alpha model? - echo alpha-pc-interix - exit ;; - 21064:Windows_NT:50:3) - echo alpha-dec-winnt3.5 - exit ;; Amiga*:UNIX_System_V:4.0:*) echo m68k-unknown-sysv4 exit ;; *:[Aa]miga[Oo][Ss]:*:*) - echo ${UNAME_MACHINE}-unknown-amigaos + echo "$UNAME_MACHINE"-unknown-amigaos exit ;; *:[Mm]orph[Oo][Ss]:*:*) - echo ${UNAME_MACHINE}-unknown-morphos + echo "$UNAME_MACHINE"-unknown-morphos exit ;; *:OS/390:*:*) echo i370-ibm-openedition @@ -319,7 +350,7 @@ echo powerpc-ibm-os400 exit ;; arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*) - echo arm-acorn-riscix${UNAME_RELEASE} + echo arm-acorn-riscix"$UNAME_RELEASE" exit ;; arm*:riscos:*:*|arm*:RISCOS:*:*) echo arm-unknown-riscos @@ -346,38 +377,38 @@ sparc) echo sparc-icl-nx7; exit ;; esac ;; s390x:SunOS:*:*) - echo ${UNAME_MACHINE}-ibm-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` + echo "$UNAME_MACHINE"-ibm-solaris2"`echo "$UNAME_RELEASE" | sed -e 's/[^.]*//'`" exit ;; sun4H:SunOS:5.*:*) - echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` + echo sparc-hal-solaris2"`echo "$UNAME_RELEASE"|sed -e 's/[^.]*//'`" exit ;; sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*) - echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` + echo sparc-sun-solaris2"`echo "$UNAME_RELEASE" | sed -e 's/[^.]*//'`" exit ;; i86pc:AuroraUX:5.*:* | i86xen:AuroraUX:5.*:*) - echo i386-pc-auroraux${UNAME_RELEASE} + echo i386-pc-auroraux"$UNAME_RELEASE" exit ;; i86pc:SunOS:5.*:* | i86xen:SunOS:5.*:*) - eval $set_cc_for_build - SUN_ARCH="i386" + eval "$set_cc_for_build" + SUN_ARCH=i386 # If there is a compiler, see if it is configured for 64-bit objects. # Note that the Sun cc does not turn __LP64__ into 1 like gcc does. # This test works for both compilers. - if [ "$CC_FOR_BUILD" != 'no_compiler_found' ]; then + if [ "$CC_FOR_BUILD" != no_compiler_found ]; then if (echo '#ifdef __amd64'; echo IS_64BIT_ARCH; echo '#endif') | \ - (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | \ + (CCOPTS="" $CC_FOR_BUILD -E - 2>/dev/null) | \ grep IS_64BIT_ARCH >/dev/null then - SUN_ARCH="x86_64" + SUN_ARCH=x86_64 fi fi - echo ${SUN_ARCH}-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` + echo "$SUN_ARCH"-pc-solaris2"`echo "$UNAME_RELEASE"|sed -e 's/[^.]*//'`" exit ;; sun4*:SunOS:6*:*) # According to config.sub, this is the proper way to canonicalize # SunOS6. Hard to guess exactly what SunOS6 will be like, but # it's likely to be more like Solaris than SunOS4. - echo sparc-sun-solaris3`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` + echo sparc-sun-solaris3"`echo "$UNAME_RELEASE"|sed -e 's/[^.]*//'`" exit ;; sun4*:SunOS:*:*) case "`/usr/bin/arch -k`" in @@ -386,25 +417,25 @@ ;; esac # Japanese Language versions have a version number like `4.1.3-JL'. - echo sparc-sun-sunos`echo ${UNAME_RELEASE}|sed -e 's/-/_/'` + echo sparc-sun-sunos"`echo "$UNAME_RELEASE"|sed -e 's/-/_/'`" exit ;; sun3*:SunOS:*:*) - echo m68k-sun-sunos${UNAME_RELEASE} + echo m68k-sun-sunos"$UNAME_RELEASE" exit ;; sun*:*:4.2BSD:*) UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null` - test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3 + test "x$UNAME_RELEASE" = x && UNAME_RELEASE=3 case "`/bin/arch`" in sun3) - echo m68k-sun-sunos${UNAME_RELEASE} + echo m68k-sun-sunos"$UNAME_RELEASE" ;; sun4) - echo sparc-sun-sunos${UNAME_RELEASE} + echo sparc-sun-sunos"$UNAME_RELEASE" ;; esac exit ;; aushp:SunOS:*:*) - echo sparc-auspex-sunos${UNAME_RELEASE} + echo sparc-auspex-sunos"$UNAME_RELEASE" exit ;; # The situation for MiNT is a little confusing. The machine name # can be virtually everything (everything which is not @@ -415,44 +446,44 @@ # MiNT. But MiNT is downward compatible to TOS, so this should # be no problem. atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*) - echo m68k-atari-mint${UNAME_RELEASE} + echo m68k-atari-mint"$UNAME_RELEASE" exit ;; atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*) - echo m68k-atari-mint${UNAME_RELEASE} + echo m68k-atari-mint"$UNAME_RELEASE" exit ;; *falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*) - echo m68k-atari-mint${UNAME_RELEASE} + echo m68k-atari-mint"$UNAME_RELEASE" exit ;; milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*) - echo m68k-milan-mint${UNAME_RELEASE} + echo m68k-milan-mint"$UNAME_RELEASE" exit ;; hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*) - echo m68k-hades-mint${UNAME_RELEASE} + echo m68k-hades-mint"$UNAME_RELEASE" exit ;; *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*) - echo m68k-unknown-mint${UNAME_RELEASE} + echo m68k-unknown-mint"$UNAME_RELEASE" exit ;; m68k:machten:*:*) - echo m68k-apple-machten${UNAME_RELEASE} + echo m68k-apple-machten"$UNAME_RELEASE" exit ;; powerpc:machten:*:*) - echo powerpc-apple-machten${UNAME_RELEASE} + echo powerpc-apple-machten"$UNAME_RELEASE" exit ;; RISC*:Mach:*:*) echo mips-dec-mach_bsd4.3 exit ;; RISC*:ULTRIX:*:*) - echo mips-dec-ultrix${UNAME_RELEASE} + echo mips-dec-ultrix"$UNAME_RELEASE" exit ;; VAX*:ULTRIX*:*:*) - echo vax-dec-ultrix${UNAME_RELEASE} + echo vax-dec-ultrix"$UNAME_RELEASE" exit ;; 2020:CLIX:*:* | 2430:CLIX:*:*) - echo clipper-intergraph-clix${UNAME_RELEASE} + echo clipper-intergraph-clix"$UNAME_RELEASE" exit ;; mips:*:*:UMIPS | mips:*:*:RISCos) - eval $set_cc_for_build - sed 's/^ //' << EOF >$dummy.c + eval "$set_cc_for_build" + sed 's/^ //' << EOF > "$dummy.c" #ifdef __cplusplus #include /* for printf() prototype */ int main (int argc, char *argv[]) { @@ -461,23 +492,23 @@ #endif #if defined (host_mips) && defined (MIPSEB) #if defined (SYSTYPE_SYSV) - printf ("mips-mips-riscos%ssysv\n", argv[1]); exit (0); + printf ("mips-mips-riscos%ssysv\\n", argv[1]); exit (0); #endif #if defined (SYSTYPE_SVR4) - printf ("mips-mips-riscos%ssvr4\n", argv[1]); exit (0); + printf ("mips-mips-riscos%ssvr4\\n", argv[1]); exit (0); #endif #if defined (SYSTYPE_BSD43) || defined(SYSTYPE_BSD) - printf ("mips-mips-riscos%sbsd\n", argv[1]); exit (0); + printf ("mips-mips-riscos%sbsd\\n", argv[1]); exit (0); #endif #endif exit (-1); } EOF - $CC_FOR_BUILD -o $dummy $dummy.c && - dummyarg=`echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` && - SYSTEM_NAME=`$dummy $dummyarg` && + $CC_FOR_BUILD -o "$dummy" "$dummy.c" && + dummyarg=`echo "$UNAME_RELEASE" | sed -n 's/\([0-9]*\).*/\1/p'` && + SYSTEM_NAME=`"$dummy" "$dummyarg"` && { echo "$SYSTEM_NAME"; exit; } - echo mips-mips-riscos${UNAME_RELEASE} + echo mips-mips-riscos"$UNAME_RELEASE" exit ;; Motorola:PowerMAX_OS:*:*) echo powerpc-motorola-powermax @@ -503,17 +534,17 @@ AViiON:dgux:*:*) # DG/UX returns AViiON for all architectures UNAME_PROCESSOR=`/usr/bin/uname -p` - if [ $UNAME_PROCESSOR = mc88100 ] || [ $UNAME_PROCESSOR = mc88110 ] + if [ "$UNAME_PROCESSOR" = mc88100 ] || [ "$UNAME_PROCESSOR" = mc88110 ] then - if [ ${TARGET_BINARY_INTERFACE}x = m88kdguxelfx ] || \ - [ ${TARGET_BINARY_INTERFACE}x = x ] + if [ "$TARGET_BINARY_INTERFACE"x = m88kdguxelfx ] || \ + [ "$TARGET_BINARY_INTERFACE"x = x ] then - echo m88k-dg-dgux${UNAME_RELEASE} + echo m88k-dg-dgux"$UNAME_RELEASE" else - echo m88k-dg-dguxbcs${UNAME_RELEASE} + echo m88k-dg-dguxbcs"$UNAME_RELEASE" fi else - echo i586-dg-dgux${UNAME_RELEASE} + echo i586-dg-dgux"$UNAME_RELEASE" fi exit ;; M88*:DolphinOS:*:*) # DolphinOS (SVR3) @@ -530,7 +561,7 @@ echo m68k-tektronix-bsd exit ;; *:IRIX*:*:*) - echo mips-sgi-irix`echo ${UNAME_RELEASE}|sed -e 's/-/_/g'` + echo mips-sgi-irix"`echo "$UNAME_RELEASE"|sed -e 's/-/_/g'`" exit ;; ????????:AIX?:[12].1:2) # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX. echo romp-ibm-aix # uname -m gives an 8 hex-code CPU id @@ -542,14 +573,14 @@ if [ -x /usr/bin/oslevel ] ; then IBM_REV=`/usr/bin/oslevel` else - IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE} + IBM_REV="$UNAME_VERSION.$UNAME_RELEASE" fi - echo ${UNAME_MACHINE}-ibm-aix${IBM_REV} + echo "$UNAME_MACHINE"-ibm-aix"$IBM_REV" exit ;; *:AIX:2:3) if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then - eval $set_cc_for_build - sed 's/^ //' << EOF >$dummy.c + eval "$set_cc_for_build" + sed 's/^ //' << EOF > "$dummy.c" #include main() @@ -560,7 +591,7 @@ exit(0); } EOF - if $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy` + if $CC_FOR_BUILD -o "$dummy" "$dummy.c" && SYSTEM_NAME=`"$dummy"` then echo "$SYSTEM_NAME" else @@ -574,7 +605,7 @@ exit ;; *:AIX:*:[4567]) IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'` - if /usr/sbin/lsattr -El ${IBM_CPU_ID} | grep ' POWER' >/dev/null 2>&1; then + if /usr/sbin/lsattr -El "$IBM_CPU_ID" | grep ' POWER' >/dev/null 2>&1; then IBM_ARCH=rs6000 else IBM_ARCH=powerpc @@ -583,18 +614,18 @@ IBM_REV=`/usr/bin/lslpp -Lqc bos.rte.libc | awk -F: '{ print $3 }' | sed s/[0-9]*$/0/` else - IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE} + IBM_REV="$UNAME_VERSION.$UNAME_RELEASE" fi - echo ${IBM_ARCH}-ibm-aix${IBM_REV} + echo "$IBM_ARCH"-ibm-aix"$IBM_REV" exit ;; *:AIX:*:*) echo rs6000-ibm-aix exit ;; - ibmrt:4.4BSD:*|romp-ibm:BSD:*) + ibmrt:4.4BSD:*|romp-ibm:4.4BSD:*) echo romp-ibm-bsd4.4 exit ;; ibmrt:*BSD:*|romp-ibm:BSD:*) # covers RT/PC BSD and - echo romp-ibm-bsd${UNAME_RELEASE} # 4.3 with uname added to + echo romp-ibm-bsd"$UNAME_RELEASE" # 4.3 with uname added to exit ;; # report: romp-ibm BSD 4.3 *:BOSX:*:*) echo rs6000-bull-bosx @@ -609,28 +640,28 @@ echo m68k-hp-bsd4.4 exit ;; 9000/[34678]??:HP-UX:*:*) - HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'` - case "${UNAME_MACHINE}" in - 9000/31? ) HP_ARCH=m68000 ;; - 9000/[34]?? ) HP_ARCH=m68k ;; + HPUX_REV=`echo "$UNAME_RELEASE"|sed -e 's/[^.]*.[0B]*//'` + case "$UNAME_MACHINE" in + 9000/31?) HP_ARCH=m68000 ;; + 9000/[34]??) HP_ARCH=m68k ;; 9000/[678][0-9][0-9]) if [ -x /usr/bin/getconf ]; then sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null` sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null` - case "${sc_cpu_version}" in - 523) HP_ARCH="hppa1.0" ;; # CPU_PA_RISC1_0 - 528) HP_ARCH="hppa1.1" ;; # CPU_PA_RISC1_1 + case "$sc_cpu_version" in + 523) HP_ARCH=hppa1.0 ;; # CPU_PA_RISC1_0 + 528) HP_ARCH=hppa1.1 ;; # CPU_PA_RISC1_1 532) # CPU_PA_RISC2_0 - case "${sc_kernel_bits}" in - 32) HP_ARCH="hppa2.0n" ;; - 64) HP_ARCH="hppa2.0w" ;; - '') HP_ARCH="hppa2.0" ;; # HP-UX 10.20 + case "$sc_kernel_bits" in + 32) HP_ARCH=hppa2.0n ;; + 64) HP_ARCH=hppa2.0w ;; + '') HP_ARCH=hppa2.0 ;; # HP-UX 10.20 esac ;; esac fi - if [ "${HP_ARCH}" = "" ]; then - eval $set_cc_for_build - sed 's/^ //' << EOF >$dummy.c + if [ "$HP_ARCH" = "" ]; then + eval "$set_cc_for_build" + sed 's/^ //' << EOF > "$dummy.c" #define _HPUX_SOURCE #include @@ -663,13 +694,13 @@ exit (0); } EOF - (CCOPTS= $CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null) && HP_ARCH=`$dummy` + (CCOPTS="" $CC_FOR_BUILD -o "$dummy" "$dummy.c" 2>/dev/null) && HP_ARCH=`"$dummy"` test -z "$HP_ARCH" && HP_ARCH=hppa fi ;; esac - if [ ${HP_ARCH} = "hppa2.0w" ] + if [ "$HP_ARCH" = hppa2.0w ] then - eval $set_cc_for_build + eval "$set_cc_for_build" # hppa2.0w-hp-hpux* has a 64-bit kernel and a compiler generating # 32-bit code. hppa64-hp-hpux* has the same kernel and a compiler @@ -680,23 +711,23 @@ # $ CC_FOR_BUILD="cc +DA2.0w" ./config.guess # => hppa64-hp-hpux11.23 - if echo __LP64__ | (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | + if echo __LP64__ | (CCOPTS="" $CC_FOR_BUILD -E - 2>/dev/null) | grep -q __LP64__ then - HP_ARCH="hppa2.0w" + HP_ARCH=hppa2.0w else - HP_ARCH="hppa64" + HP_ARCH=hppa64 fi fi - echo ${HP_ARCH}-hp-hpux${HPUX_REV} + echo "$HP_ARCH"-hp-hpux"$HPUX_REV" exit ;; ia64:HP-UX:*:*) - HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'` - echo ia64-hp-hpux${HPUX_REV} + HPUX_REV=`echo "$UNAME_RELEASE"|sed -e 's/[^.]*.[0B]*//'` + echo ia64-hp-hpux"$HPUX_REV" exit ;; 3050*:HI-UX:*:*) - eval $set_cc_for_build - sed 's/^ //' << EOF >$dummy.c + eval "$set_cc_for_build" + sed 's/^ //' << EOF > "$dummy.c" #include int main () @@ -721,11 +752,11 @@ exit (0); } EOF - $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy` && + $CC_FOR_BUILD -o "$dummy" "$dummy.c" && SYSTEM_NAME=`"$dummy"` && { echo "$SYSTEM_NAME"; exit; } echo unknown-hitachi-hiuxwe2 exit ;; - 9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:* ) + 9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:*) echo hppa1.1-hp-bsd exit ;; 9000/8??:4.3bsd:*:*) @@ -734,7 +765,7 @@ *9??*:MPE/iX:*:* | *3000*:MPE/iX:*:*) echo hppa1.0-hp-mpeix exit ;; - hp7??:OSF1:*:* | hp8?[79]:OSF1:*:* ) + hp7??:OSF1:*:* | hp8?[79]:OSF1:*:*) echo hppa1.1-hp-osf exit ;; hp8??:OSF1:*:*) @@ -742,9 +773,9 @@ exit ;; i*86:OSF1:*:*) if [ -x /usr/sbin/sysversion ] ; then - echo ${UNAME_MACHINE}-unknown-osf1mk + echo "$UNAME_MACHINE"-unknown-osf1mk else - echo ${UNAME_MACHINE}-unknown-osf1 + echo "$UNAME_MACHINE"-unknown-osf1 fi exit ;; parisc*:Lites*:*:*) @@ -769,127 +800,109 @@ echo c4-convex-bsd exit ;; CRAY*Y-MP:*:*:*) - echo ymp-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' + echo ymp-cray-unicos"$UNAME_RELEASE" | sed -e 's/\.[^.]*$/.X/' exit ;; CRAY*[A-Z]90:*:*:*) - echo ${UNAME_MACHINE}-cray-unicos${UNAME_RELEASE} \ + echo "$UNAME_MACHINE"-cray-unicos"$UNAME_RELEASE" \ | sed -e 's/CRAY.*\([A-Z]90\)/\1/' \ -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/ \ -e 's/\.[^.]*$/.X/' exit ;; CRAY*TS:*:*:*) - echo t90-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' + echo t90-cray-unicos"$UNAME_RELEASE" | sed -e 's/\.[^.]*$/.X/' exit ;; CRAY*T3E:*:*:*) - echo alphaev5-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' + echo alphaev5-cray-unicosmk"$UNAME_RELEASE" | sed -e 's/\.[^.]*$/.X/' exit ;; CRAY*SV1:*:*:*) - echo sv1-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' + echo sv1-cray-unicos"$UNAME_RELEASE" | sed -e 's/\.[^.]*$/.X/' exit ;; *:UNICOS/mp:*:*) - echo craynv-cray-unicosmp${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' + echo craynv-cray-unicosmp"$UNAME_RELEASE" | sed -e 's/\.[^.]*$/.X/' exit ;; F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*) - FUJITSU_PROC=`uname -m | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'` - FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'` - FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'` + FUJITSU_PROC=`uname -m | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz` + FUJITSU_SYS=`uname -p | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz | sed -e 's/\///'` + FUJITSU_REL=`echo "$UNAME_RELEASE" | sed -e 's/ /_/'` echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}" exit ;; 5000:UNIX_System_V:4.*:*) - FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'` - FUJITSU_REL=`echo ${UNAME_RELEASE} | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/ /_/'` + FUJITSU_SYS=`uname -p | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz | sed -e 's/\///'` + FUJITSU_REL=`echo "$UNAME_RELEASE" | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz | sed -e 's/ /_/'` echo "sparc-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}" exit ;; i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*) - echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE} + echo "$UNAME_MACHINE"-pc-bsdi"$UNAME_RELEASE" exit ;; sparc*:BSD/OS:*:*) - echo sparc-unknown-bsdi${UNAME_RELEASE} + echo sparc-unknown-bsdi"$UNAME_RELEASE" exit ;; *:BSD/OS:*:*) - echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE} + echo "$UNAME_MACHINE"-unknown-bsdi"$UNAME_RELEASE" exit ;; *:FreeBSD:*:*) UNAME_PROCESSOR=`/usr/bin/uname -p` - case ${UNAME_PROCESSOR} in + case "$UNAME_PROCESSOR" in amd64) - echo x86_64-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;; - *) - echo ${UNAME_PROCESSOR}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;; + UNAME_PROCESSOR=x86_64 ;; + i386) + UNAME_PROCESSOR=i586 ;; esac + echo "$UNAME_PROCESSOR"-unknown-freebsd"`echo "$UNAME_RELEASE"|sed -e 's/[-(].*//'`" exit ;; i*:CYGWIN*:*) - echo ${UNAME_MACHINE}-pc-cygwin + echo "$UNAME_MACHINE"-pc-cygwin exit ;; *:MINGW64*:*) - echo ${UNAME_MACHINE}-pc-mingw64 + echo "$UNAME_MACHINE"-pc-mingw64 exit ;; *:MINGW*:*) - echo ${UNAME_MACHINE}-pc-mingw32 + echo "$UNAME_MACHINE"-pc-mingw32 exit ;; *:MSYS*:*) - echo ${UNAME_MACHINE}-pc-msys - exit ;; - i*:windows32*:*) - # uname -m includes "-pc" on this system. - echo ${UNAME_MACHINE}-mingw32 + echo "$UNAME_MACHINE"-pc-msys exit ;; i*:PW*:*) - echo ${UNAME_MACHINE}-pc-pw32 + echo "$UNAME_MACHINE"-pc-pw32 exit ;; *:Interix*:*) - case ${UNAME_MACHINE} in + case "$UNAME_MACHINE" in x86) - echo i586-pc-interix${UNAME_RELEASE} + echo i586-pc-interix"$UNAME_RELEASE" exit ;; authenticamd | genuineintel | EM64T) - echo x86_64-unknown-interix${UNAME_RELEASE} + echo x86_64-unknown-interix"$UNAME_RELEASE" exit ;; IA64) - echo ia64-unknown-interix${UNAME_RELEASE} + echo ia64-unknown-interix"$UNAME_RELEASE" exit ;; esac ;; - [345]86:Windows_95:* | [345]86:Windows_98:* | [345]86:Windows_NT:*) - echo i${UNAME_MACHINE}-pc-mks - exit ;; - 8664:Windows_NT:*) - echo x86_64-pc-mks - exit ;; - i*:Windows_NT*:* | Pentium*:Windows_NT*:*) - # How do we know it's Interix rather than the generic POSIX subsystem? - # It also conflicts with pre-2.0 versions of AT&T UWIN. Should we - # UNAME_MACHINE based on the output of uname instead of i386? - echo i586-pc-interix - exit ;; i*:UWIN*:*) - echo ${UNAME_MACHINE}-pc-uwin + echo "$UNAME_MACHINE"-pc-uwin exit ;; amd64:CYGWIN*:*:* | x86_64:CYGWIN*:*:*) echo x86_64-unknown-cygwin exit ;; - p*:CYGWIN*:*) - echo powerpcle-unknown-cygwin - exit ;; prep*:SunOS:5.*:*) - echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` + echo powerpcle-unknown-solaris2"`echo "$UNAME_RELEASE"|sed -e 's/[^.]*//'`" exit ;; *:GNU:*:*) # the GNU system - echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-${LIBC}`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'` + echo "`echo "$UNAME_MACHINE"|sed -e 's,[-/].*$,,'`-unknown-$LIBC`echo "$UNAME_RELEASE"|sed -e 's,/.*$,,'`" exit ;; *:GNU/*:*:*) # other systems with GNU libc and userland - echo ${UNAME_MACHINE}-unknown-`echo ${UNAME_SYSTEM} | sed 's,^[^/]*/,,' | tr '[A-Z]' '[a-z]'``echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`-${LIBC} + echo "$UNAME_MACHINE-unknown-`echo "$UNAME_SYSTEM" | sed 's,^[^/]*/,,' | tr "[:upper:]" "[:lower:]"``echo "$UNAME_RELEASE"|sed -e 's/[-(].*//'`-$LIBC" exit ;; i*86:Minix:*:*) - echo ${UNAME_MACHINE}-pc-minix + echo "$UNAME_MACHINE"-pc-minix exit ;; aarch64:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-${LIBC} + echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" exit ;; aarch64_be:Linux:*:*) UNAME_MACHINE=aarch64_be - echo ${UNAME_MACHINE}-unknown-linux-${LIBC} + echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" exit ;; alpha:Linux:*:*) case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in @@ -902,58 +915,64 @@ EV68*) UNAME_MACHINE=alphaev68 ;; esac objdump --private-headers /bin/sh | grep -q ld.so.1 - if test "$?" = 0 ; then LIBC="gnulibc1" ; fi - echo ${UNAME_MACHINE}-unknown-linux-${LIBC} + if test "$?" = 0 ; then LIBC=gnulibc1 ; fi + echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" exit ;; arc:Linux:*:* | arceb:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-${LIBC} + echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" exit ;; arm*:Linux:*:*) - eval $set_cc_for_build + eval "$set_cc_for_build" if echo __ARM_EABI__ | $CC_FOR_BUILD -E - 2>/dev/null \ | grep -q __ARM_EABI__ then - echo ${UNAME_MACHINE}-unknown-linux-${LIBC} + echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" else if echo __ARM_PCS_VFP | $CC_FOR_BUILD -E - 2>/dev/null \ | grep -q __ARM_PCS_VFP then - echo ${UNAME_MACHINE}-unknown-linux-${LIBC}eabi + echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"eabi else - echo ${UNAME_MACHINE}-unknown-linux-${LIBC}eabihf + echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"eabihf fi fi exit ;; avr32*:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-${LIBC} + echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" exit ;; cris:Linux:*:*) - echo ${UNAME_MACHINE}-axis-linux-${LIBC} + echo "$UNAME_MACHINE"-axis-linux-"$LIBC" exit ;; crisv32:Linux:*:*) - echo ${UNAME_MACHINE}-axis-linux-${LIBC} + echo "$UNAME_MACHINE"-axis-linux-"$LIBC" + exit ;; + e2k:Linux:*:*) + echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" exit ;; frv:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-${LIBC} + echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" exit ;; hexagon:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-${LIBC} + echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" exit ;; i*86:Linux:*:*) - echo ${UNAME_MACHINE}-pc-linux-${LIBC} + echo "$UNAME_MACHINE"-pc-linux-"$LIBC" exit ;; ia64:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-${LIBC} + echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" + exit ;; + k1om:Linux:*:*) + echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" exit ;; m32r*:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-${LIBC} + echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" exit ;; m68*:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-${LIBC} + echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" exit ;; mips:Linux:*:* | mips64:Linux:*:*) - eval $set_cc_for_build - sed 's/^ //' << EOF >$dummy.c + eval "$set_cc_for_build" + sed 's/^ //' << EOF > "$dummy.c" #undef CPU #undef ${UNAME_MACHINE} #undef ${UNAME_MACHINE}el @@ -967,64 +986,70 @@ #endif #endif EOF - eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^CPU'` - test x"${CPU}" != x && { echo "${CPU}-unknown-linux-${LIBC}"; exit; } + eval "`$CC_FOR_BUILD -E "$dummy.c" 2>/dev/null | grep '^CPU'`" + test "x$CPU" != x && { echo "$CPU-unknown-linux-$LIBC"; exit; } ;; + mips64el:Linux:*:*) + echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" + exit ;; openrisc*:Linux:*:*) - echo or1k-unknown-linux-${LIBC} + echo or1k-unknown-linux-"$LIBC" exit ;; or32:Linux:*:* | or1k*:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-${LIBC} + echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" exit ;; padre:Linux:*:*) - echo sparc-unknown-linux-${LIBC} + echo sparc-unknown-linux-"$LIBC" exit ;; parisc64:Linux:*:* | hppa64:Linux:*:*) - echo hppa64-unknown-linux-${LIBC} + echo hppa64-unknown-linux-"$LIBC" exit ;; parisc:Linux:*:* | hppa:Linux:*:*) # Look for CPU level case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in - PA7*) echo hppa1.1-unknown-linux-${LIBC} ;; - PA8*) echo hppa2.0-unknown-linux-${LIBC} ;; - *) echo hppa-unknown-linux-${LIBC} ;; + PA7*) echo hppa1.1-unknown-linux-"$LIBC" ;; + PA8*) echo hppa2.0-unknown-linux-"$LIBC" ;; + *) echo hppa-unknown-linux-"$LIBC" ;; esac exit ;; ppc64:Linux:*:*) - echo powerpc64-unknown-linux-${LIBC} + echo powerpc64-unknown-linux-"$LIBC" exit ;; ppc:Linux:*:*) - echo powerpc-unknown-linux-${LIBC} + echo powerpc-unknown-linux-"$LIBC" exit ;; ppc64le:Linux:*:*) - echo powerpc64le-unknown-linux-${LIBC} + echo powerpc64le-unknown-linux-"$LIBC" exit ;; ppcle:Linux:*:*) - echo powerpcle-unknown-linux-${LIBC} + echo powerpcle-unknown-linux-"$LIBC" + exit ;; + riscv32:Linux:*:* | riscv64:Linux:*:*) + echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" exit ;; s390:Linux:*:* | s390x:Linux:*:*) - echo ${UNAME_MACHINE}-ibm-linux-${LIBC} + echo "$UNAME_MACHINE"-ibm-linux-"$LIBC" exit ;; sh64*:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-${LIBC} + echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" exit ;; sh*:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-${LIBC} + echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" exit ;; sparc:Linux:*:* | sparc64:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-${LIBC} + echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" exit ;; tile*:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-${LIBC} + echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" exit ;; vax:Linux:*:*) - echo ${UNAME_MACHINE}-dec-linux-${LIBC} + echo "$UNAME_MACHINE"-dec-linux-"$LIBC" exit ;; x86_64:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-${LIBC} + echo "$UNAME_MACHINE"-pc-linux-"$LIBC" exit ;; xtensa*:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-${LIBC} + echo "$UNAME_MACHINE"-unknown-linux-"$LIBC" exit ;; i*86:DYNIX/ptx:4*:*) # ptx 4.0 does uname -s correctly, with DYNIX/ptx in there. @@ -1038,34 +1063,34 @@ # I am not positive that other SVR4 systems won't match this, # I just have to hope. -- rms. # Use sysv4.2uw... so that sysv4* matches it. - echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION} + echo "$UNAME_MACHINE"-pc-sysv4.2uw"$UNAME_VERSION" exit ;; i*86:OS/2:*:*) # If we were able to find `uname', then EMX Unix compatibility # is probably installed. - echo ${UNAME_MACHINE}-pc-os2-emx + echo "$UNAME_MACHINE"-pc-os2-emx exit ;; i*86:XTS-300:*:STOP) - echo ${UNAME_MACHINE}-unknown-stop + echo "$UNAME_MACHINE"-unknown-stop exit ;; i*86:atheos:*:*) - echo ${UNAME_MACHINE}-unknown-atheos + echo "$UNAME_MACHINE"-unknown-atheos exit ;; i*86:syllable:*:*) - echo ${UNAME_MACHINE}-pc-syllable + echo "$UNAME_MACHINE"-pc-syllable exit ;; i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.[02]*:*) - echo i386-unknown-lynxos${UNAME_RELEASE} + echo i386-unknown-lynxos"$UNAME_RELEASE" exit ;; i*86:*DOS:*:*) - echo ${UNAME_MACHINE}-pc-msdosdjgpp + echo "$UNAME_MACHINE"-pc-msdosdjgpp exit ;; - i*86:*:4.*:* | i*86:SYSTEM_V:4.*:*) - UNAME_REL=`echo ${UNAME_RELEASE} | sed 's/\/MP$//'` + i*86:*:4.*:*) + UNAME_REL=`echo "$UNAME_RELEASE" | sed 's/\/MP$//'` if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then - echo ${UNAME_MACHINE}-univel-sysv${UNAME_REL} + echo "$UNAME_MACHINE"-univel-sysv"$UNAME_REL" else - echo ${UNAME_MACHINE}-pc-sysv${UNAME_REL} + echo "$UNAME_MACHINE"-pc-sysv"$UNAME_REL" fi exit ;; i*86:*:5:[678]*) @@ -1075,12 +1100,12 @@ *Pentium) UNAME_MACHINE=i586 ;; *Pent*|*Celeron) UNAME_MACHINE=i686 ;; esac - echo ${UNAME_MACHINE}-unknown-sysv${UNAME_RELEASE}${UNAME_SYSTEM}${UNAME_VERSION} + echo "$UNAME_MACHINE-unknown-sysv${UNAME_RELEASE}${UNAME_SYSTEM}{$UNAME_VERSION}" exit ;; i*86:*:3.2:*) if test -f /usr/options/cb.name; then UNAME_REL=`sed -n 's/.*Version //p' /dev/null >/dev/null ; then UNAME_REL=`(/bin/uname -X|grep Release|sed -e 's/.*= //')` (/bin/uname -X|grep i80486 >/dev/null) && UNAME_MACHINE=i486 @@ -1090,9 +1115,9 @@ && UNAME_MACHINE=i686 (/bin/uname -X|grep '^Machine.*Pentium Pro' >/dev/null) \ && UNAME_MACHINE=i686 - echo ${UNAME_MACHINE}-pc-sco$UNAME_REL + echo "$UNAME_MACHINE"-pc-sco"$UNAME_REL" else - echo ${UNAME_MACHINE}-pc-sysv32 + echo "$UNAME_MACHINE"-pc-sysv32 fi exit ;; pc:*:*:*) @@ -1100,7 +1125,7 @@ # uname -m prints for DJGPP always 'pc', but it prints nothing about # the processor, so we play safe by assuming i586. # Note: whatever this is, it MUST be the same as what config.sub - # prints for the "djgpp" host, or else GDB configury will decide that + # prints for the "djgpp" host, or else GDB configure will decide that # this is a cross-build. echo i586-pc-msdosdjgpp exit ;; @@ -1112,9 +1137,9 @@ exit ;; i860:*:4.*:*) # i860-SVR4 if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then - echo i860-stardent-sysv${UNAME_RELEASE} # Stardent Vistra i860-SVR4 + echo i860-stardent-sysv"$UNAME_RELEASE" # Stardent Vistra i860-SVR4 else # Add other i860-SVR4 vendors below as they are discovered. - echo i860-unknown-sysv${UNAME_RELEASE} # Unknown i860-SVR4 + echo i860-unknown-sysv"$UNAME_RELEASE" # Unknown i860-SVR4 fi exit ;; mini*:CTIX:SYS*5:*) @@ -1134,9 +1159,9 @@ test -r /etc/.relid \ && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid` /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ - && { echo i486-ncr-sysv4.3${OS_REL}; exit; } + && { echo i486-ncr-sysv4.3"$OS_REL"; exit; } /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \ - && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;; + && { echo i586-ncr-sysv4.3"$OS_REL"; exit; } ;; 3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*) /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ && { echo i486-ncr-sysv4; exit; } ;; @@ -1145,28 +1170,28 @@ test -r /etc/.relid \ && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid` /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ - && { echo i486-ncr-sysv4.3${OS_REL}; exit; } + && { echo i486-ncr-sysv4.3"$OS_REL"; exit; } /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \ - && { echo i586-ncr-sysv4.3${OS_REL}; exit; } + && { echo i586-ncr-sysv4.3"$OS_REL"; exit; } /bin/uname -p 2>/dev/null | /bin/grep pteron >/dev/null \ - && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;; + && { echo i586-ncr-sysv4.3"$OS_REL"; exit; } ;; m68*:LynxOS:2.*:* | m68*:LynxOS:3.0*:*) - echo m68k-unknown-lynxos${UNAME_RELEASE} + echo m68k-unknown-lynxos"$UNAME_RELEASE" exit ;; mc68030:UNIX_System_V:4.*:*) echo m68k-atari-sysv4 exit ;; TSUNAMI:LynxOS:2.*:*) - echo sparc-unknown-lynxos${UNAME_RELEASE} + echo sparc-unknown-lynxos"$UNAME_RELEASE" exit ;; rs6000:LynxOS:2.*:*) - echo rs6000-unknown-lynxos${UNAME_RELEASE} + echo rs6000-unknown-lynxos"$UNAME_RELEASE" exit ;; PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.[02]*:*) - echo powerpc-unknown-lynxos${UNAME_RELEASE} + echo powerpc-unknown-lynxos"$UNAME_RELEASE" exit ;; SM[BE]S:UNIX_SV:*:*) - echo mips-dde-sysv${UNAME_RELEASE} + echo mips-dde-sysv"$UNAME_RELEASE" exit ;; RM*:ReliantUNIX-*:*:*) echo mips-sni-sysv4 @@ -1177,7 +1202,7 @@ *:SINIX-*:*:*) if uname -p 2>/dev/null >/dev/null ; then UNAME_MACHINE=`(uname -p) 2>/dev/null` - echo ${UNAME_MACHINE}-sni-sysv4 + echo "$UNAME_MACHINE"-sni-sysv4 else echo ns32k-sni-sysv fi @@ -1197,23 +1222,23 @@ exit ;; i*86:VOS:*:*) # From Paul.Green@stratus.com. - echo ${UNAME_MACHINE}-stratus-vos + echo "$UNAME_MACHINE"-stratus-vos exit ;; *:VOS:*:*) # From Paul.Green@stratus.com. echo hppa1.1-stratus-vos exit ;; mc68*:A/UX:*:*) - echo m68k-apple-aux${UNAME_RELEASE} + echo m68k-apple-aux"$UNAME_RELEASE" exit ;; news*:NEWS-OS:6*:*) echo mips-sony-newsos6 exit ;; R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*) if [ -d /usr/nec ]; then - echo mips-nec-sysv${UNAME_RELEASE} + echo mips-nec-sysv"$UNAME_RELEASE" else - echo mips-unknown-sysv${UNAME_RELEASE} + echo mips-unknown-sysv"$UNAME_RELEASE" fi exit ;; BeBox:BeOS:*:*) # BeOS running on hardware made by Be, PPC only. @@ -1232,46 +1257,56 @@ echo x86_64-unknown-haiku exit ;; SX-4:SUPER-UX:*:*) - echo sx4-nec-superux${UNAME_RELEASE} + echo sx4-nec-superux"$UNAME_RELEASE" exit ;; SX-5:SUPER-UX:*:*) - echo sx5-nec-superux${UNAME_RELEASE} + echo sx5-nec-superux"$UNAME_RELEASE" exit ;; SX-6:SUPER-UX:*:*) - echo sx6-nec-superux${UNAME_RELEASE} + echo sx6-nec-superux"$UNAME_RELEASE" exit ;; SX-7:SUPER-UX:*:*) - echo sx7-nec-superux${UNAME_RELEASE} + echo sx7-nec-superux"$UNAME_RELEASE" exit ;; SX-8:SUPER-UX:*:*) - echo sx8-nec-superux${UNAME_RELEASE} + echo sx8-nec-superux"$UNAME_RELEASE" exit ;; SX-8R:SUPER-UX:*:*) - echo sx8r-nec-superux${UNAME_RELEASE} + echo sx8r-nec-superux"$UNAME_RELEASE" + exit ;; + SX-ACE:SUPER-UX:*:*) + echo sxace-nec-superux"$UNAME_RELEASE" exit ;; Power*:Rhapsody:*:*) - echo powerpc-apple-rhapsody${UNAME_RELEASE} + echo powerpc-apple-rhapsody"$UNAME_RELEASE" exit ;; *:Rhapsody:*:*) - echo ${UNAME_MACHINE}-apple-rhapsody${UNAME_RELEASE} + echo "$UNAME_MACHINE"-apple-rhapsody"$UNAME_RELEASE" exit ;; *:Darwin:*:*) UNAME_PROCESSOR=`uname -p` || UNAME_PROCESSOR=unknown - eval $set_cc_for_build + eval "$set_cc_for_build" if test "$UNAME_PROCESSOR" = unknown ; then UNAME_PROCESSOR=powerpc fi - if test `echo "$UNAME_RELEASE" | sed -e 's/\..*//'` -le 10 ; then - if [ "$CC_FOR_BUILD" != 'no_compiler_found' ]; then + if test "`echo "$UNAME_RELEASE" | sed -e 's/\..*//'`" -le 10 ; then + if [ "$CC_FOR_BUILD" != no_compiler_found ]; then if (echo '#ifdef __LP64__'; echo IS_64BIT_ARCH; echo '#endif') | \ - (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | \ - grep IS_64BIT_ARCH >/dev/null + (CCOPTS="" $CC_FOR_BUILD -E - 2>/dev/null) | \ + grep IS_64BIT_ARCH >/dev/null then case $UNAME_PROCESSOR in i386) UNAME_PROCESSOR=x86_64 ;; powerpc) UNAME_PROCESSOR=powerpc64 ;; esac fi + # On 10.4-10.6 one might compile for PowerPC via gcc -arch ppc + if (echo '#ifdef __POWERPC__'; echo IS_PPC; echo '#endif') | \ + (CCOPTS="" $CC_FOR_BUILD -E - 2>/dev/null) | \ + grep IS_PPC >/dev/null + then + UNAME_PROCESSOR=powerpc + fi fi elif test "$UNAME_PROCESSOR" = i386 ; then # Avoid executing cc on OS X 10.9, as it ships with a stub @@ -1282,27 +1317,33 @@ # that Apple uses in portable devices. UNAME_PROCESSOR=x86_64 fi - echo ${UNAME_PROCESSOR}-apple-darwin${UNAME_RELEASE} + echo "$UNAME_PROCESSOR"-apple-darwin"$UNAME_RELEASE" exit ;; *:procnto*:*:* | *:QNX:[0123456789]*:*) UNAME_PROCESSOR=`uname -p` - if test "$UNAME_PROCESSOR" = "x86"; then + if test "$UNAME_PROCESSOR" = x86; then UNAME_PROCESSOR=i386 UNAME_MACHINE=pc fi - echo ${UNAME_PROCESSOR}-${UNAME_MACHINE}-nto-qnx${UNAME_RELEASE} + echo "$UNAME_PROCESSOR"-"$UNAME_MACHINE"-nto-qnx"$UNAME_RELEASE" exit ;; *:QNX:*:4*) echo i386-pc-qnx exit ;; - NEO-?:NONSTOP_KERNEL:*:*) - echo neo-tandem-nsk${UNAME_RELEASE} + NEO-*:NONSTOP_KERNEL:*:*) + echo neo-tandem-nsk"$UNAME_RELEASE" exit ;; NSE-*:NONSTOP_KERNEL:*:*) - echo nse-tandem-nsk${UNAME_RELEASE} + echo nse-tandem-nsk"$UNAME_RELEASE" + exit ;; + NSR-*:NONSTOP_KERNEL:*:*) + echo nsr-tandem-nsk"$UNAME_RELEASE" exit ;; - NSR-?:NONSTOP_KERNEL:*:*) - echo nsr-tandem-nsk${UNAME_RELEASE} + NSV-*:NONSTOP_KERNEL:*:*) + echo nsv-tandem-nsk"$UNAME_RELEASE" + exit ;; + NSX-*:NONSTOP_KERNEL:*:*) + echo nsx-tandem-nsk"$UNAME_RELEASE" exit ;; *:NonStop-UX:*:*) echo mips-compaq-nonstopux @@ -1311,18 +1352,18 @@ echo bs2000-siemens-sysv exit ;; DS/*:UNIX_System_V:*:*) - echo ${UNAME_MACHINE}-${UNAME_SYSTEM}-${UNAME_RELEASE} + echo "$UNAME_MACHINE"-"$UNAME_SYSTEM"-"$UNAME_RELEASE" exit ;; *:Plan9:*:*) # "uname -m" is not consistent, so use $cputype instead. 386 # is converted to i386 for consistency with other x86 # operating systems. - if test "$cputype" = "386"; then + if test "$cputype" = 386; then UNAME_MACHINE=i386 else UNAME_MACHINE="$cputype" fi - echo ${UNAME_MACHINE}-unknown-plan9 + echo "$UNAME_MACHINE"-unknown-plan9 exit ;; *:TOPS-10:*:*) echo pdp10-unknown-tops10 @@ -1343,14 +1384,14 @@ echo pdp10-unknown-its exit ;; SEI:*:*:SEIUX) - echo mips-sei-seiux${UNAME_RELEASE} + echo mips-sei-seiux"$UNAME_RELEASE" exit ;; *:DragonFly:*:*) - echo ${UNAME_MACHINE}-unknown-dragonfly`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` + echo "$UNAME_MACHINE"-unknown-dragonfly"`echo "$UNAME_RELEASE"|sed -e 's/[-(].*//'`" exit ;; *:*VMS:*:*) UNAME_MACHINE=`(uname -p) 2>/dev/null` - case "${UNAME_MACHINE}" in + case "$UNAME_MACHINE" in A*) echo alpha-dec-vms ; exit ;; I*) echo ia64-dec-vms ; exit ;; V*) echo vax-dec-vms ; exit ;; @@ -1359,34 +1400,48 @@ echo i386-pc-xenix exit ;; i*86:skyos:*:*) - echo ${UNAME_MACHINE}-pc-skyos`echo ${UNAME_RELEASE}` | sed -e 's/ .*$//' + echo "$UNAME_MACHINE"-pc-skyos"`echo "$UNAME_RELEASE" | sed -e 's/ .*$//'`" exit ;; i*86:rdos:*:*) - echo ${UNAME_MACHINE}-pc-rdos + echo "$UNAME_MACHINE"-pc-rdos exit ;; i*86:AROS:*:*) - echo ${UNAME_MACHINE}-pc-aros + echo "$UNAME_MACHINE"-pc-aros exit ;; x86_64:VMkernel:*:*) - echo ${UNAME_MACHINE}-unknown-esx + echo "$UNAME_MACHINE"-unknown-esx + exit ;; + amd64:Isilon\ OneFS:*:*) + echo x86_64-unknown-onefs exit ;; esac +echo "$0: unable to guess system type" >&2 + +case "$UNAME_MACHINE:$UNAME_SYSTEM" in + mips:Linux | mips64:Linux) + # If we got here on MIPS GNU/Linux, output extra information. + cat >&2 <&2 < in order to provide the needed -information to handle your system. +If $0 has already been updated, send the following data and any +information you think might be pertinent to config-patches@gnu.org to +provide the necessary information to handle your system. config.guess timestamp = $timestamp @@ -1405,16 +1460,16 @@ /usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null` /usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null` -UNAME_MACHINE = ${UNAME_MACHINE} -UNAME_RELEASE = ${UNAME_RELEASE} -UNAME_SYSTEM = ${UNAME_SYSTEM} -UNAME_VERSION = ${UNAME_VERSION} +UNAME_MACHINE = "$UNAME_MACHINE" +UNAME_RELEASE = "$UNAME_RELEASE" +UNAME_SYSTEM = "$UNAME_SYSTEM" +UNAME_VERSION = "$UNAME_VERSION" EOF exit 1 # Local variables: -# eval: (add-hook 'write-file-hooks 'time-stamp) +# eval: (add-hook 'before-save-hook 'time-stamp) # time-stamp-start: "timestamp='" # time-stamp-format: "%:y-%02m-%02d" # time-stamp-end: "'" diff -Nru libvdpau-1.1.1/config.sub libvdpau-1.2/config.sub --- libvdpau-1.1.1/config.sub 2015-08-31 21:00:08.000000000 +0000 +++ libvdpau-1.2/config.sub 2019-02-28 18:40:58.000000000 +0000 @@ -1,8 +1,8 @@ #! /bin/sh # Configuration validation subroutine script. -# Copyright 1992-2014 Free Software Foundation, Inc. +# Copyright 1992-2018 Free Software Foundation, Inc. -timestamp='2014-12-03' +timestamp='2018-03-08' # This file is free software; you can redistribute it and/or modify it # under the terms of the GNU General Public License as published by @@ -15,7 +15,7 @@ # General Public License for more details. # # You should have received a copy of the GNU General Public License -# along with this program; if not, see . +# along with this program; if not, see . # # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a @@ -33,7 +33,7 @@ # Otherwise, we print the canonical config type on stdout and succeed. # You can get the latest version of this script from: -# http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub;hb=HEAD +# https://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub # This file is supposed to be the same for all GNU packages # and recognize all the CPU types, system types and aliases @@ -53,12 +53,11 @@ me=`echo "$0" | sed -e 's,.*/,,'` usage="\ -Usage: $0 [OPTION] CPU-MFR-OPSYS - $0 [OPTION] ALIAS +Usage: $0 [OPTION] CPU-MFR-OPSYS or ALIAS Canonicalize a configuration name. -Operation modes: +Options: -h, --help print this help, then exit -t, --time-stamp print date of last modification, then exit -v, --version print version number, then exit @@ -68,7 +67,7 @@ version="\ GNU config.sub ($timestamp) -Copyright 1992-2014 Free Software Foundation, Inc. +Copyright 1992-2018 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." @@ -95,7 +94,7 @@ *local*) # First pass through any local machine types. - echo $1 + echo "$1" exit ;; * ) @@ -113,24 +112,24 @@ # Separate what the user gave into CPU-COMPANY and OS or KERNEL-OS (if any). # Here we must recognize all the valid KERNEL-OS combinations. -maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'` +maybe_os=`echo "$1" | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'` case $maybe_os in nto-qnx* | linux-gnu* | linux-android* | linux-dietlibc | linux-newlib* | \ linux-musl* | linux-uclibc* | uclinux-uclibc* | uclinux-gnu* | kfreebsd*-gnu* | \ - knetbsd*-gnu* | netbsd*-gnu* | \ - kopensolaris*-gnu* | \ + knetbsd*-gnu* | netbsd*-gnu* | netbsd*-eabi* | \ + kopensolaris*-gnu* | cloudabi*-eabi* | \ storm-chaos* | os2-emx* | rtmk-nova*) os=-$maybe_os - basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'` + basic_machine=`echo "$1" | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'` ;; android-linux) os=-linux-android - basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`-unknown + basic_machine=`echo "$1" | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`-unknown ;; *) - basic_machine=`echo $1 | sed 's/-[^-]*$//'` - if [ $basic_machine != $1 ] - then os=`echo $1 | sed 's/.*-/-/'` + basic_machine=`echo "$1" | sed 's/-[^-]*$//'` + if [ "$basic_machine" != "$1" ] + then os=`echo "$1" | sed 's/.*-/-/'` else os=; fi ;; esac @@ -179,44 +178,44 @@ ;; -sco6) os=-sco5v6 - basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + basic_machine=`echo "$1" | sed -e 's/86-.*/86-pc/'` ;; -sco5) os=-sco3.2v5 - basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + basic_machine=`echo "$1" | sed -e 's/86-.*/86-pc/'` ;; -sco4) os=-sco3.2v4 - basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + basic_machine=`echo "$1" | sed -e 's/86-.*/86-pc/'` ;; -sco3.2.[4-9]*) os=`echo $os | sed -e 's/sco3.2./sco3.2v/'` - basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + basic_machine=`echo "$1" | sed -e 's/86-.*/86-pc/'` ;; -sco3.2v[4-9]*) # Don't forget version if it is 3.2v4 or newer. - basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + basic_machine=`echo "$1" | sed -e 's/86-.*/86-pc/'` ;; -sco5v6*) # Don't forget version if it is 3.2v4 or newer. - basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + basic_machine=`echo "$1" | sed -e 's/86-.*/86-pc/'` ;; -sco*) os=-sco3.2v2 - basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + basic_machine=`echo "$1" | sed -e 's/86-.*/86-pc/'` ;; -udk*) - basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + basic_machine=`echo "$1" | sed -e 's/86-.*/86-pc/'` ;; -isc) os=-isc2.2 - basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + basic_machine=`echo "$1" | sed -e 's/86-.*/86-pc/'` ;; -clix*) basic_machine=clipper-intergraph ;; -isc*) - basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + basic_machine=`echo "$1" | sed -e 's/86-.*/86-pc/'` ;; -lynx*178) os=-lynxos178 @@ -228,10 +227,7 @@ os=-lynxos ;; -ptx*) - basic_machine=`echo $1 | sed -e 's/86-.*/86-sequent/'` - ;; - -windowsnt*) - os=`echo $os | sed -e 's/windowsnt/winnt/'` + basic_machine=`echo "$1" | sed -e 's/86-.*/86-sequent/'` ;; -psos*) os=-psos @@ -255,15 +251,16 @@ | arc | arceb \ | arm | arm[bl]e | arme[lb] | armv[2-8] | armv[3-8][lb] | armv7[arm] \ | avr | avr32 \ + | ba \ | be32 | be64 \ | bfin \ | c4x | c8051 | clipper \ | d10v | d30v | dlx | dsp16xx \ - | epiphany \ - | fido | fr30 | frv \ + | e2k | epiphany \ + | fido | fr30 | frv | ft32 \ | h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \ | hexagon \ - | i370 | i860 | i960 | ia64 \ + | i370 | i860 | i960 | ia16 | ia64 \ | ip2k | iq2000 \ | k1om \ | le32 | le64 \ @@ -299,13 +296,14 @@ | nios | nios2 | nios2eb | nios2el \ | ns16k | ns32k \ | open8 | or1k | or1knd | or32 \ - | pdp10 | pdp11 | pj | pjl \ + | pdp10 | pj | pjl \ | powerpc | powerpc64 | powerpc64le | powerpcle \ + | pru \ | pyramid \ | riscv32 | riscv64 \ | rl78 | rx \ | score \ - | sh | sh[1234] | sh[24]a | sh[24]aeb | sh[23]e | sh[34]eb | sheb | shbe | shle | sh[1234]le | sh3ele \ + | sh | sh[1234] | sh[24]a | sh[24]aeb | sh[23]e | sh[234]eb | sheb | shbe | shle | sh[1234]le | sh3ele \ | sh64 | sh64le \ | sparc | sparc64 | sparc64b | sparc64v | sparc86x | sparclet | sparclite \ | sparcv8 | sparcv9 | sparcv9b | sparcv9v \ @@ -314,7 +312,7 @@ | ubicom32 \ | v850 | v850e | v850e1 | v850e2 | v850es | v850e2v3 \ | visium \ - | we32k \ + | wasm32 \ | x86 | xc16x | xstormy16 | xtensa \ | z8k | z80) basic_machine=$basic_machine-unknown @@ -335,7 +333,7 @@ basic_machine=$basic_machine-unknown os=-none ;; - m88110 | m680[12346]0 | m683?2 | m68360 | m5200 | v70 | w65 | z8k) + m88110 | m680[12346]0 | m683?2 | m68360 | m5200 | v70 | w65) ;; ms1) basic_machine=mt-unknown @@ -364,7 +362,7 @@ ;; # Object if more than one company name word. *-*-*) - echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2 + echo Invalid configuration \`"$1"\': machine \`"$basic_machine"\' not recognized 1>&2 exit 1 ;; # Recognize the basic CPU types with company name. @@ -376,17 +374,18 @@ | alphapca5[67]-* | alpha64pca5[67]-* | arc-* | arceb-* \ | arm-* | armbe-* | armle-* | armeb-* | armv*-* \ | avr-* | avr32-* \ + | ba-* \ | be32-* | be64-* \ | bfin-* | bs2000-* \ | c[123]* | c30-* | [cjt]90-* | c4x-* \ | c8051-* | clipper-* | craynv-* | cydra-* \ | d10v-* | d30v-* | dlx-* \ - | elxsi-* \ + | e2k-* | elxsi-* \ | f30[01]-* | f700-* | fido-* | fr30-* | frv-* | fx80-* \ | h8300-* | h8500-* \ | hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \ | hexagon-* \ - | i*86-* | i860-* | i960-* | ia64-* \ + | i*86-* | i860-* | i960-* | ia16-* | ia64-* \ | ip2k-* | iq2000-* \ | k1om-* \ | le32-* | le64-* \ @@ -427,13 +426,15 @@ | orion-* \ | pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \ | powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* \ + | pru-* \ | pyramid-* \ + | riscv32-* | riscv64-* \ | rl78-* | romp-* | rs6000-* | rx-* \ | sh-* | sh[1234]-* | sh[24]a-* | sh[24]aeb-* | sh[23]e-* | sh[34]eb-* | sheb-* | shbe-* \ | shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \ | sparc-* | sparc64-* | sparc64b-* | sparc64v-* | sparc86x-* | sparclet-* \ | sparclite-* \ - | sparcv8-* | sparcv9-* | sparcv9b-* | sparcv9v-* | sv1-* | sx?-* \ + | sparcv8-* | sparcv9-* | sparcv9b-* | sparcv9v-* | sv1-* | sx*-* \ | tahoe-* \ | tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* \ | tile*-* \ @@ -442,6 +443,7 @@ | v850-* | v850e-* | v850e1-* | v850es-* | v850e2-* | v850e2v3-* \ | vax-* \ | visium-* \ + | wasm32-* \ | we32k-* \ | x86-* | x86_64-* | xc16x-* | xps100-* \ | xstormy16-* | xtensa*-* \ @@ -455,7 +457,7 @@ # Recognize the various machine names and aliases which stand # for a CPU type and a company and sometimes even an OS. 386bsd) - basic_machine=i386-unknown + basic_machine=i386-pc os=-bsd ;; 3b1 | 7300 | 7300-att | att-7300 | pc7300 | safari | unixpc) @@ -489,7 +491,7 @@ basic_machine=x86_64-pc ;; amd64-*) - basic_machine=x86_64-`echo $basic_machine | sed 's/^[^-]*-//'` + basic_machine=x86_64-`echo "$basic_machine" | sed 's/^[^-]*-//'` ;; amdahl) basic_machine=580-amdahl @@ -518,6 +520,9 @@ basic_machine=i386-pc os=-aros ;; + asmjs) + basic_machine=asmjs-unknown + ;; aux) basic_machine=m68k-apple os=-aux @@ -531,7 +536,7 @@ os=-linux ;; blackfin-*) - basic_machine=bfin-`echo $basic_machine | sed 's/^[^-]*-//'` + basic_machine=bfin-`echo "$basic_machine" | sed 's/^[^-]*-//'` os=-linux ;; bluegene*) @@ -539,13 +544,13 @@ os=-cnk ;; c54x-*) - basic_machine=tic54x-`echo $basic_machine | sed 's/^[^-]*-//'` + basic_machine=tic54x-`echo "$basic_machine" | sed 's/^[^-]*-//'` ;; c55x-*) - basic_machine=tic55x-`echo $basic_machine | sed 's/^[^-]*-//'` + basic_machine=tic55x-`echo "$basic_machine" | sed 's/^[^-]*-//'` ;; c6x-*) - basic_machine=tic6x-`echo $basic_machine | sed 's/^[^-]*-//'` + basic_machine=tic6x-`echo "$basic_machine" | sed 's/^[^-]*-//'` ;; c90) basic_machine=c90-cray @@ -634,10 +639,18 @@ basic_machine=rs6000-bull os=-bosx ;; - dpx2* | dpx2*-bull) + dpx2*) basic_machine=m68k-bull os=-sysv3 ;; + e500v[12]) + basic_machine=powerpc-unknown + os=$os"spe" + ;; + e500v[12]-*) + basic_machine=powerpc-`echo "$basic_machine" | sed 's/^[^-]*-//'` + os=$os"spe" + ;; ebmon29k) basic_machine=a29k-amd os=-ebmon @@ -727,9 +740,6 @@ hp9k8[0-9][0-9] | hp8[0-9][0-9]) basic_machine=hppa1.0-hp ;; - hppa-next) - os=-nextstep3 - ;; hppaosf) basic_machine=hppa1.1-hp os=-osf @@ -742,26 +752,26 @@ basic_machine=i370-ibm ;; i*86v32) - basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` + basic_machine=`echo "$1" | sed -e 's/86.*/86-pc/'` os=-sysv32 ;; i*86v4*) - basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` + basic_machine=`echo "$1" | sed -e 's/86.*/86-pc/'` os=-sysv4 ;; i*86v) - basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` + basic_machine=`echo "$1" | sed -e 's/86.*/86-pc/'` os=-sysv ;; i*86sol2) - basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` + basic_machine=`echo "$1" | sed -e 's/86.*/86-pc/'` os=-solaris2 ;; i386mach) basic_machine=i386-mach os=-mach ;; - i386-vsta | vsta) + vsta) basic_machine=i386-unknown os=-vsta ;; @@ -780,19 +790,16 @@ os=-sysv ;; leon-*|leon[3-9]-*) - basic_machine=sparc-`echo $basic_machine | sed 's/-.*//'` + basic_machine=sparc-`echo "$basic_machine" | sed 's/-.*//'` ;; m68knommu) basic_machine=m68k-unknown os=-linux ;; m68knommu-*) - basic_machine=m68k-`echo $basic_machine | sed 's/^[^-]*-//'` + basic_machine=m68k-`echo "$basic_machine" | sed 's/^[^-]*-//'` os=-linux ;; - m88k-omron*) - basic_machine=m88k-omron - ;; magnum | m3230) basic_machine=mips-mips os=-sysv @@ -824,10 +831,10 @@ os=-mint ;; mips3*-*) - basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'` + basic_machine=`echo "$basic_machine" | sed -e 's/mips3/mips64/'` ;; mips3*) - basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`-unknown + basic_machine=`echo "$basic_machine" | sed -e 's/mips3/mips64/'`-unknown ;; monitor) basic_machine=m68k-rom68k @@ -846,7 +853,7 @@ os=-msdos ;; ms1-*) - basic_machine=`echo $basic_machine | sed -e 's/ms1-/mt-/'` + basic_machine=`echo "$basic_machine" | sed -e 's/ms1-/mt-/'` ;; msys) basic_machine=i686-pc @@ -888,7 +895,7 @@ basic_machine=v70-nec os=-sysv ;; - next | m*-next ) + next | m*-next) basic_machine=m68k-next case $os in -nextstep* ) @@ -933,6 +940,12 @@ nsr-tandem) basic_machine=nsr-tandem ;; + nsv-tandem) + basic_machine=nsv-tandem + ;; + nsx-tandem) + basic_machine=nsx-tandem + ;; op50n-* | op60c-*) basic_machine=hppa1.1-oki os=-proelf @@ -965,7 +978,7 @@ os=-linux ;; parisc-*) - basic_machine=hppa-`echo $basic_machine | sed 's/^[^-]*-//'` + basic_machine=hppa-`echo "$basic_machine" | sed 's/^[^-]*-//'` os=-linux ;; pbd) @@ -981,7 +994,7 @@ basic_machine=i386-pc ;; pc98-*) - basic_machine=i386-`echo $basic_machine | sed 's/^[^-]*-//'` + basic_machine=i386-`echo "$basic_machine" | sed 's/^[^-]*-//'` ;; pentium | p5 | k5 | k6 | nexgen | viac3) basic_machine=i586-pc @@ -996,16 +1009,16 @@ basic_machine=i786-pc ;; pentium-* | p5-* | k5-* | k6-* | nexgen-* | viac3-*) - basic_machine=i586-`echo $basic_machine | sed 's/^[^-]*-//'` + basic_machine=i586-`echo "$basic_machine" | sed 's/^[^-]*-//'` ;; pentiumpro-* | p6-* | 6x86-* | athlon-*) - basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'` + basic_machine=i686-`echo "$basic_machine" | sed 's/^[^-]*-//'` ;; pentiumii-* | pentium2-* | pentiumiii-* | pentium3-*) - basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'` + basic_machine=i686-`echo "$basic_machine" | sed 's/^[^-]*-//'` ;; pentium4-*) - basic_machine=i786-`echo $basic_machine | sed 's/^[^-]*-//'` + basic_machine=i786-`echo "$basic_machine" | sed 's/^[^-]*-//'` ;; pn) basic_machine=pn-gould @@ -1015,23 +1028,23 @@ ppc | ppcbe) basic_machine=powerpc-unknown ;; ppc-* | ppcbe-*) - basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'` + basic_machine=powerpc-`echo "$basic_machine" | sed 's/^[^-]*-//'` ;; - ppcle | powerpclittle | ppc-le | powerpc-little) + ppcle | powerpclittle) basic_machine=powerpcle-unknown ;; ppcle-* | powerpclittle-*) - basic_machine=powerpcle-`echo $basic_machine | sed 's/^[^-]*-//'` + basic_machine=powerpcle-`echo "$basic_machine" | sed 's/^[^-]*-//'` ;; ppc64) basic_machine=powerpc64-unknown ;; - ppc64-*) basic_machine=powerpc64-`echo $basic_machine | sed 's/^[^-]*-//'` + ppc64-*) basic_machine=powerpc64-`echo "$basic_machine" | sed 's/^[^-]*-//'` ;; - ppc64le | powerpc64little | ppc64-le | powerpc64-little) + ppc64le | powerpc64little) basic_machine=powerpc64le-unknown ;; ppc64le-* | powerpc64little-*) - basic_machine=powerpc64le-`echo $basic_machine | sed 's/^[^-]*-//'` + basic_machine=powerpc64le-`echo "$basic_machine" | sed 's/^[^-]*-//'` ;; ps2) basic_machine=i386-ibm @@ -1085,17 +1098,10 @@ sequent) basic_machine=i386-sequent ;; - sh) - basic_machine=sh-hitachi - os=-hms - ;; sh5el) basic_machine=sh5le-unknown ;; - sh64) - basic_machine=sh64-unknown - ;; - sparclite-wrs | simso-wrs) + simso-wrs) basic_machine=sparclite-wrs os=-vxworks ;; @@ -1114,7 +1120,7 @@ os=-sysv4 ;; strongarm-* | thumb-*) - basic_machine=arm-`echo $basic_machine | sed 's/^[^-]*-//'` + basic_machine=arm-`echo "$basic_machine" | sed 's/^[^-]*-//'` ;; sun2) basic_machine=m68000-sun @@ -1236,6 +1242,9 @@ basic_machine=hppa1.1-winbond os=-proelf ;; + x64) + basic_machine=x86_64-pc + ;; xbox) basic_machine=i686-pc os=-mingw32 @@ -1244,20 +1253,12 @@ basic_machine=xps100-honeywell ;; xscale-* | xscalee[bl]-*) - basic_machine=`echo $basic_machine | sed 's/^xscale/arm/'` + basic_machine=`echo "$basic_machine" | sed 's/^xscale/arm/'` ;; ymp) basic_machine=ymp-cray os=-unicos ;; - z8k-*-coff) - basic_machine=z8k-unknown - os=-sim - ;; - z80-*-coff) - basic_machine=z80-unknown - os=-sim - ;; none) basic_machine=none-none os=-none @@ -1286,10 +1287,6 @@ vax) basic_machine=vax-dec ;; - pdp10) - # there are many clones, so DEC is not a safe bet - basic_machine=pdp10-unknown - ;; pdp11) basic_machine=pdp11-dec ;; @@ -1299,9 +1296,6 @@ sh[1234] | sh[24]a | sh[24]aeb | sh[34]eb | sh[1234]le | sh[23]ele) basic_machine=sh-unknown ;; - sparc | sparcv8 | sparcv9 | sparcv9b | sparcv9v) - basic_machine=sparc-sun - ;; cydra) basic_machine=cydra-cydrome ;; @@ -1321,7 +1315,7 @@ # Make sure to match an already-canonicalized machine name. ;; *) - echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2 + echo Invalid configuration \`"$1"\': machine \`"$basic_machine"\' not recognized 1>&2 exit 1 ;; esac @@ -1329,10 +1323,10 @@ # Here we canonicalize certain aliases for manufacturers. case $basic_machine in *-digital*) - basic_machine=`echo $basic_machine | sed 's/digital.*/dec/'` + basic_machine=`echo "$basic_machine" | sed 's/digital.*/dec/'` ;; *-commodore*) - basic_machine=`echo $basic_machine | sed 's/commodore.*/cbm/'` + basic_machine=`echo "$basic_machine" | sed 's/commodore.*/cbm/'` ;; *) ;; @@ -1343,8 +1337,8 @@ if [ x"$os" != x"" ] then case $os in - # First match some system type aliases - # that might get confused with valid system types. + # First match some system type aliases that might get confused + # with valid system types. # -solaris* is a basic system type, with this one exception. -auroraux) os=-auroraux @@ -1355,45 +1349,48 @@ -solaris) os=-solaris2 ;; - -svr4*) - os=-sysv4 - ;; -unixware*) os=-sysv4.2uw ;; -gnu/linux*) os=`echo $os | sed -e 's|gnu/linux|linux-gnu|'` ;; - # First accept the basic system types. + # es1800 is here to avoid being matched by es* (a different OS) + -es1800*) + os=-ose + ;; + # Now accept the basic system types. # The portable systems comes first. - # Each alternative MUST END IN A *, to match a version number. + # Each alternative MUST end in a * to match a version number. # -sysv* is not here because it comes later, after sysvr4. -gnu* | -bsd* | -mach* | -minix* | -genix* | -ultrix* | -irix* \ | -*vms* | -sco* | -esix* | -isc* | -aix* | -cnk* | -sunos | -sunos[34]*\ | -hpux* | -unos* | -osf* | -luna* | -dgux* | -auroraux* | -solaris* \ | -sym* | -kopensolaris* | -plan9* \ | -amigaos* | -amigados* | -msdos* | -newsos* | -unicos* | -aof* \ - | -aos* | -aros* \ + | -aos* | -aros* | -cloudabi* | -sortix* \ | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \ | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \ - | -hiux* | -386bsd* | -knetbsd* | -mirbsd* | -netbsd* \ - | -bitrig* | -openbsd* | -solidbsd* \ + | -hiux* | -knetbsd* | -mirbsd* | -netbsd* \ + | -bitrig* | -openbsd* | -solidbsd* | -libertybsd* \ | -ekkobsd* | -kfreebsd* | -freebsd* | -riscix* | -lynxos* \ | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \ | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \ - | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \ - | -chorusos* | -chorusrdb* | -cegcc* \ + | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* | -hcos* \ + | -chorusos* | -chorusrdb* | -cegcc* | -glidix* \ | -cygwin* | -msys* | -pe* | -psos* | -moss* | -proelf* | -rtems* \ - | -mingw32* | -mingw64* | -linux-gnu* | -linux-android* \ + | -midipix* | -mingw32* | -mingw64* | -linux-gnu* | -linux-android* \ | -linux-newlib* | -linux-musl* | -linux-uclibc* \ | -uxpv* | -beos* | -mpeix* | -udk* | -moxiebox* \ - | -interix* | -uwin* | -mks* | -rhapsody* | -darwin* | -opened* \ + | -interix* | -uwin* | -mks* | -rhapsody* | -darwin* \ | -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \ | -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \ | -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \ - | -morphos* | -superux* | -rtmk* | -rtmk-nova* | -windiss* \ + | -morphos* | -superux* | -rtmk* | -windiss* \ | -powermax* | -dnix* | -nx6 | -nx7 | -sei* | -dragonfly* \ - | -skyos* | -haiku* | -rdos* | -toppers* | -drops* | -es* | -tirtos*) + | -skyos* | -haiku* | -rdos* | -toppers* | -drops* | -es* \ + | -onefs* | -tirtos* | -phoenix* | -fuchsia* | -redox* | -bme* \ + | -midnightbsd*) # Remember, each alternative MUST END IN *, to match a version number. ;; -qnx*) @@ -1410,12 +1407,12 @@ -nto*) os=`echo $os | sed -e 's|nto|nto-qnx|'` ;; - -sim | -es1800* | -hms* | -xray | -os68k* | -none* | -v88r* \ - | -windows* | -osx | -abug | -netware* | -os9* | -beos* | -haiku* \ + -sim | -xray | -os68k* | -v88r* \ + | -windows* | -osx | -abug | -netware* | -os9* \ | -macos* | -mpw* | -magic* | -mmixware* | -mon960* | -lnews*) ;; -mac*) - os=`echo $os | sed -e 's|mac|macos|'` + os=`echo "$os" | sed -e 's|mac|macos|'` ;; -linux-dietlibc) os=-linux-dietlibc @@ -1424,10 +1421,10 @@ os=`echo $os | sed -e 's|linux|linux-gnu|'` ;; -sunos5*) - os=`echo $os | sed -e 's|sunos5|solaris2|'` + os=`echo "$os" | sed -e 's|sunos5|solaris2|'` ;; -sunos6*) - os=`echo $os | sed -e 's|sunos6|solaris3|'` + os=`echo "$os" | sed -e 's|sunos6|solaris3|'` ;; -opened*) os=-openedition @@ -1438,12 +1435,6 @@ -wince*) os=-wince ;; - -osfrose*) - os=-osfrose - ;; - -osf*) - os=-osf - ;; -utek*) os=-bsd ;; @@ -1468,7 +1459,7 @@ -nova*) os=-rtmk-nova ;; - -ns2 ) + -ns2) os=-nextstep2 ;; -nsk*) @@ -1490,7 +1481,7 @@ -oss*) os=-sysv3 ;; - -svr4) + -svr4*) os=-sysv4 ;; -svr3) @@ -1505,32 +1496,38 @@ -ose*) os=-ose ;; - -es1800*) - os=-ose - ;; - -xenix) - os=-xenix - ;; -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*) os=-mint ;; - -aros*) - os=-aros - ;; -zvmoe) os=-zvmoe ;; -dicos*) os=-dicos ;; + -pikeos*) + # Until real need of OS specific support for + # particular features comes up, bare metal + # configurations are quite functional. + case $basic_machine in + arm*) + os=-eabi + ;; + *) + os=-elf + ;; + esac + ;; -nacl*) ;; + -ios) + ;; -none) ;; *) # Get rid of the `-' at the beginning of $os. os=`echo $os | sed 's/[^-]*-//'` - echo Invalid configuration \`$1\': system \`$os\' not recognized 1>&2 + echo Invalid configuration \`"$1"\': system \`"$os"\' not recognized 1>&2 exit 1 ;; esac @@ -1620,12 +1617,12 @@ sparc-* | *-sun) os=-sunos4.1.1 ;; + pru-*) + os=-elf + ;; *-be) os=-beos ;; - *-haiku) - os=-haiku - ;; *-ibm) os=-aix ;; @@ -1665,7 +1662,7 @@ m88k-omron*) os=-luna ;; - *-next ) + *-next) os=-nextstep ;; *-sequent) @@ -1680,9 +1677,6 @@ i370-*) os=-mvs ;; - *-next) - os=-nextstep3 - ;; *-gould) os=-sysv ;; @@ -1792,15 +1786,15 @@ vendor=stratus ;; esac - basic_machine=`echo $basic_machine | sed "s/unknown/$vendor/"` + basic_machine=`echo "$basic_machine" | sed "s/unknown/$vendor/"` ;; esac -echo $basic_machine$os +echo "$basic_machine$os" exit # Local variables: -# eval: (add-hook 'write-file-hooks 'time-stamp) +# eval: (add-hook 'before-save-hook 'time-stamp) # time-stamp-start: "timestamp='" # time-stamp-format: "%:y-%02m-%02d" # time-stamp-end: "'" diff -Nru libvdpau-1.1.1/configure libvdpau-1.2/configure --- libvdpau-1.1.1/configure 2015-08-31 21:00:06.000000000 +0000 +++ libvdpau-1.2/configure 2019-02-28 18:43:03.000000000 +0000 @@ -1,6 +1,6 @@ #! /bin/sh # Guess values for system-dependent variables and create Makefiles. -# Generated by GNU Autoconf 2.69 for libvdpau 1.1.1. +# Generated by GNU Autoconf 2.69 for libvdpau 1.2. # # Report bugs to . # @@ -590,8 +590,8 @@ # Identity of this package. PACKAGE_NAME='libvdpau' PACKAGE_TARNAME='libvdpau' -PACKAGE_VERSION='1.1.1' -PACKAGE_STRING='libvdpau 1.1.1' +PACKAGE_VERSION='1.2' +PACKAGE_STRING='libvdpau 1.2' PACKAGE_BUGREPORT='vdpau@lists.freedesktop.org' PACKAGE_URL='' @@ -700,7 +700,6 @@ AMDEPBACKSLASH AMDEP_FALSE AMDEP_TRUE -am__quote am__include DEPDIR OBJEXT @@ -774,7 +773,8 @@ PACKAGE_TARNAME PACKAGE_NAME PATH_SEPARATOR -SHELL' +SHELL +am__quote' ac_subst_files='' ac_user_opts=' enable_option_checking @@ -1355,7 +1355,7 @@ # Omit some internal or obsolete options to make the list less imposing. # This message is too long to be a string in the A/UX 3.1 sh. cat <<_ACEOF -\`configure' configures libvdpau 1.1.1 to adapt to many kinds of systems. +\`configure' configures libvdpau 1.2 to adapt to many kinds of systems. Usage: $0 [OPTION]... [VAR=VALUE]... @@ -1425,7 +1425,7 @@ if test -n "$ac_init_help"; then case $ac_init_help in - short | recursive ) echo "Configuration of libvdpau 1.1.1:";; + short | recursive ) echo "Configuration of libvdpau 1.2:";; esac cat <<\_ACEOF @@ -1555,7 +1555,7 @@ test -n "$ac_init_help" && exit $ac_status if $ac_init_version; then cat <<\_ACEOF -libvdpau configure 1.1.1 +libvdpau configure 1.2 generated by GNU Autoconf 2.69 Copyright (C) 2012 Free Software Foundation, Inc. @@ -2045,7 +2045,7 @@ This file contains any messages produced by compilers while running configure, to aid debugging if configure makes a mistake. -It was created by libvdpau $as_me 1.1.1, which was +It was created by libvdpau $as_me 1.2, which was generated by GNU Autoconf 2.69. Invocation command line was $ $0 $@ @@ -2393,7 +2393,7 @@ ac_compiler_gnu=$ac_cv_c_compiler_gnu -am__api_version='1.15' +am__api_version='1.16' ac_aux_dir= for ac_dir in "$srcdir" "$srcdir/.." "$srcdir/../.."; do @@ -2908,7 +2908,7 @@ # Define the identity of the package. PACKAGE='libvdpau' - VERSION='1.1.1' + VERSION='1.2' cat >>confdefs.h <<_ACEOF @@ -2938,8 +2938,8 @@ # For better backward compatibility. To be removed once Automake 1.9.x # dies out for good. For more background, see: -# -# +# +# mkdir_p='$(MKDIR_P)' # We need awk for the "check" target (and possibly the TAP driver). The @@ -2990,7 +2990,7 @@ Aborting the configuration process, to ensure you take notice of the issue. You can download and install GNU coreutils to get an 'rm' implementation -that behaves properly: . +that behaves properly: . If you want to complete the configuration process using your problematic 'rm' anyway, export the environment variable ACCEPT_INFERIOR_RM_PROGRAM @@ -3010,45 +3010,45 @@ ac_config_commands="$ac_config_commands depfiles" - -am_make=${MAKE-make} -cat > confinc << 'END' +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ${MAKE-make} supports the include directive" >&5 +$as_echo_n "checking whether ${MAKE-make} supports the include directive... " >&6; } +cat > confinc.mk << 'END' am__doit: - @echo this is the am__doit target + @echo this is the am__doit target >confinc.out .PHONY: am__doit END -# If we don't find an include directive, just comment out the code. -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for style of include used by $am_make" >&5 -$as_echo_n "checking for style of include used by $am_make... " >&6; } am__include="#" am__quote= -_am_result=none -# First try GNU make style include. -echo "include confinc" > confmf -# Ignore all kinds of additional output from 'make'. -case `$am_make -s -f confmf 2> /dev/null` in #( -*the\ am__doit\ target*) - am__include=include - am__quote= - _am_result=GNU - ;; -esac -# Now try BSD make style include. -if test "$am__include" = "#"; then - echo '.include "confinc"' > confmf - case `$am_make -s -f confmf 2> /dev/null` in #( - *the\ am__doit\ target*) - am__include=.include - am__quote="\"" - _am_result=BSD +# BSD make does it like this. +echo '.include "confinc.mk" # ignored' > confmf.BSD +# Other make implementations (GNU, Solaris 10, AIX) do it like this. +echo 'include confinc.mk # ignored' > confmf.GNU +_am_result=no +for s in GNU BSD; do + { echo "$as_me:$LINENO: ${MAKE-make} -f confmf.$s && cat confinc.out" >&5 + (${MAKE-make} -f confmf.$s && cat confinc.out) >&5 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } + case $?:`cat confinc.out 2>/dev/null` in #( + '0:this is the am__doit target') : + case $s in #( + BSD) : + am__include='.include' am__quote='"' ;; #( + *) : + am__include='include' am__quote='' ;; +esac ;; #( + *) : ;; - esac -fi - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $_am_result" >&5 -$as_echo "$_am_result" >&6; } -rm -f confinc confmf +esac + if test "$am__include" != "#"; then + _am_result="yes ($s style)" + break + fi +done +rm -f confinc.* confmf.* +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: ${_am_result}" >&5 +$as_echo "${_am_result}" >&6; } # Check whether --enable-dependency-tracking was given. if test "${enable_dependency_tracking+set}" = set; then : @@ -5671,8 +5671,8 @@ -macro_version='2.4.6' -macro_revision='2.4.6' +macro_version='2.4.6.42-b88ce' +macro_revision='2.4.6.42' @@ -7204,13 +7204,29 @@ fi : ${AR=ar} -: ${AR_FLAGS=cru} +# Use ARFLAGS variable as AR's operation code to sync the variable naming with +# Automake. If both AR_FLAGS and ARFLAGS are specified, AR_FLAGS should have +# higher priority because thats what people were doing historically (setting +# ARFLAGS for automake and AR_FLAGS for libtool). FIXME: Make the AR_FLAGS +# variable obsoleted/removed. + +test ${AR_FLAGS+y} || AR_FLAGS=${ARFLAGS-cr} +lt_ar_flags=$AR_FLAGS + + + + + + +# Make AR_FLAGS overridable by 'make ARFLAGS='. Don't try to run-time override +# by AR_FLAGS because that was never working and AR_FLAGS is about to die. + @@ -7659,7 +7675,7 @@ if test "$lt_cv_nm_interface" = "MS dumpbin"; then # Fake it for dumpbin and say T for any non-static function, # D for any global variable and I for any imported variable. - # Also find C++ and __fastcall symbols from MSVC++, + # Also find C++ and __fastcall symbols from MSVC++ or ICC, # which start with @ or ?. lt_cv_sys_global_symbol_pipe="$AWK '"\ " {last_section=section; section=\$ 3};"\ @@ -8928,8 +8944,8 @@ _LT_EOF echo "$LTCC $LTCFLAGS -c -o conftest.o conftest.c" >&5 $LTCC $LTCFLAGS -c -o conftest.o conftest.c 2>&5 - echo "$AR cru libconftest.a conftest.o" >&5 - $AR cru libconftest.a conftest.o 2>&5 + echo "$AR $AR_FLAGS libconftest.a conftest.o" >&5 + $AR $AR_FLAGS libconftest.a conftest.o 2>&5 echo "$RANLIB libconftest.a" >&5 $RANLIB libconftest.a 2>&5 cat > conftest.c << _LT_EOF @@ -9306,8 +9322,8 @@ ofile=libtool can_build_shared=yes -# All known linkers require a '.a' archive for static linking (except MSVC, -# which needs '.lib'). +# All known linkers require a '.a' archive for static linking (except MSVC and +# ICC, which need '.lib'). libext=a with_gnu_ld=$lt_cv_prog_gnu_ld @@ -10230,15 +10246,15 @@ case $host_os in cygwin* | mingw* | pw32* | cegcc*) - # FIXME: the MSVC++ port hasn't been tested in a loooong time + # FIXME: the MSVC++ and ICC port hasn't been tested in a loooong time # When not using gcc, we currently assume that we are using - # Microsoft Visual C++. + # Microsoft Visual C++ or Intel C++ Compiler. if test yes != "$GCC"; then with_gnu_ld=no fi ;; interix*) - # we just hope/assume this is gcc and not c89 (= MSVC++) + # we just hope/assume this is gcc and not c89 (= MSVC++ or ICC) with_gnu_ld=yes ;; openbsd* | bitrig*) @@ -10402,6 +10418,7 @@ emximp -o $lib $output_objdir/$libname.def' old_archive_From_new_cmds='emximp -o $output_objdir/${libname}_dll.a $output_objdir/$libname.def' enable_shared_with_static_runtimes=yes + file_list_spec='@' ;; interix[3-9]*) @@ -10619,7 +10636,7 @@ if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && (substr(\$ 3,1,1) != ".")) { if (\$ 2 == "W") { print \$ 3 " weak" } else { print \$ 3 } } }'\'' | sort -u > $export_symbols' else - export_symbols_cmds='`func_echo_all $NM | $SED -e '\''s/B\([^B]*\)$/P\1/'\''` -PCpgl $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) && (substr(\$ 1,1,1) != ".")) { if ((\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) { print \$ 1 " weak" } else { print \$ 1 } } }'\'' | sort -u > $export_symbols' + export_symbols_cmds='`func_echo_all $NM | $SED -e '\''s/B\([^B]*\)$/P\1/'\''` -PCpgl $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "L") || (\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) && (substr(\$ 1,1,1) != ".")) { if ((\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) { print \$ 1 " weak" } else { print \$ 1 } } }'\'' | sort -u > $export_symbols' fi aix_use_runtimelinking=no @@ -10886,12 +10903,12 @@ cygwin* | mingw* | pw32* | cegcc*) # When not using gcc, we currently assume that we are using - # Microsoft Visual C++. + # Microsoft Visual C++ or Intel C++ Compiler. # hardcode_libdir_flag_spec is actually meaningless, as there is # no search path for DLLs. case $cc_basename in - cl*) - # Native MSVC + cl* | icl*) + # Native MSVC or ICC hardcode_libdir_flag_spec=' ' allow_undefined_flag=unsupported always_export_symbols=yes @@ -10932,7 +10949,7 @@ fi' ;; *) - # Assume MSVC wrapper + # Assume MSVC and ICC wrapper hardcode_libdir_flag_spec=' ' allow_undefined_flag=unsupported # Tell ltmain to make .lib files, not .a files. @@ -11256,6 +11273,7 @@ emximp -o $lib $output_objdir/$libname.def' old_archive_From_new_cmds='emximp -o $output_objdir/${libname}_dll.a $output_objdir/$libname.def' enable_shared_with_static_runtimes=yes + file_list_spec='@' ;; osf3*) @@ -11963,8 +11981,8 @@ dynamic_linker='Win32 ld.exe' ;; - *,cl*) - # Native MSVC + *,cl* | *,icl*) + # Native MSVC or ICC libname_spec='$name' soname_spec='$libname`echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext' library_names_spec='$libname.dll.lib' @@ -12020,7 +12038,7 @@ ;; *) - # Assume MSVC wrapper + # Assume MSVC and ICC wrapper library_names_spec='$libname`echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext $libname.lib' dynamic_linker='Win32 ld.exe' ;; @@ -13199,30 +13217,41 @@ old_striplib= { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether stripping libraries is possible" >&5 $as_echo_n "checking whether stripping libraries is possible... " >&6; } -if test -n "$STRIP" && $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then - test -z "$old_striplib" && old_striplib="$STRIP --strip-debug" - test -z "$striplib" && striplib="$STRIP --strip-unneeded" - { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -$as_echo "yes" >&6; } +if test -z "$STRIP"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } else -# FIXME - insert some real tests, host_os isn't really good enough - case $host_os in - darwin*) - if test -n "$STRIP"; then + if $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then + old_striplib="$STRIP --strip-debug" + striplib="$STRIP --strip-unneeded" + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + else + case $host_os in + darwin*) + # FIXME - insert some real tests, host_os isn't really good enough striplib="$STRIP -x" old_striplib="$STRIP -S" { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 $as_echo "yes" >&6; } - else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 + ;; + freebsd*) + if $STRIP -V 2>&1 | $GREP "elftoolchain" >/dev/null; then + old_striplib="$STRIP --strip-debug" + striplib="$STRIP --strip-unneeded" + { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 +$as_echo "yes" >&6; } + else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } - fi - ;; - *) - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 + fi + ;; + *) + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 $as_echo "no" >&6; } - ;; - esac + ;; + esac + fi fi @@ -13990,8 +14019,8 @@ cygwin* | mingw* | pw32* | cegcc*) case $GXX,$cc_basename in - ,cl* | no,cl*) - # Native MSVC + ,cl* | no,cl* | ,icl* | no,icl*) + # Native MSVC or ICC # hardcode_libdir_flag_spec is actually meaningless, as there is # no search path for DLLs. hardcode_libdir_flag_spec_CXX=' ' @@ -14121,6 +14150,7 @@ emximp -o $lib $output_objdir/$libname.def' old_archive_From_new_cmds_CXX='emximp -o $output_objdir/${libname}_dll.a $output_objdir/$libname.def' enable_shared_with_static_runtimes_CXX=yes + file_list_spec_CXX='@' ;; dgux*) @@ -15556,7 +15586,7 @@ if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then export_symbols_cmds_CXX='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && (substr(\$ 3,1,1) != ".")) { if (\$ 2 == "W") { print \$ 3 " weak" } else { print \$ 3 } } }'\'' | sort -u > $export_symbols' else - export_symbols_cmds_CXX='`func_echo_all $NM | $SED -e '\''s/B\([^B]*\)$/P\1/'\''` -PCpgl $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) && (substr(\$ 1,1,1) != ".")) { if ((\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) { print \$ 1 " weak" } else { print \$ 1 } } }'\'' | sort -u > $export_symbols' + export_symbols_cmds_CXX='`func_echo_all $NM | $SED -e '\''s/B\([^B]*\)$/P\1/'\''` -PCpgl $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "L") || (\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) && (substr(\$ 1,1,1) != ".")) { if ((\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) { print \$ 1 " weak" } else { print \$ 1 } } }'\'' | sort -u > $export_symbols' fi ;; pw32*) @@ -15564,7 +15594,7 @@ ;; cygwin* | mingw* | cegcc*) case $cc_basename in - cl*) + cl* | icl*) exclude_expsyms_CXX='_NULL_IMPORT_DESCRIPTOR|_IMPORT_DESCRIPTOR_.*' ;; *) @@ -15926,8 +15956,8 @@ dynamic_linker='Win32 ld.exe' ;; - *,cl*) - # Native MSVC + *,cl* | *,icl*) + # Native MSVC or ICC libname_spec='$name' soname_spec='$libname`echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext' library_names_spec='$libname.dll.lib' @@ -15983,7 +16013,7 @@ ;; *) - # Assume MSVC wrapper + # Assume MSVC and ICC wrapper library_names_spec='$libname`echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext $libname.lib' dynamic_linker='Win32 ld.exe' ;; @@ -17919,7 +17949,7 @@ # report actual input values of CONFIG_FILES etc. instead of their # values after options handling. ac_log=" -This file was extended by libvdpau $as_me 1.1.1, which was +This file was extended by libvdpau $as_me 1.2, which was generated by GNU Autoconf 2.69. Invocation command line was CONFIG_FILES = $CONFIG_FILES @@ -17985,7 +18015,7 @@ cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`" ac_cs_version="\\ -libvdpau config.status 1.1.1 +libvdpau config.status 1.2 configured by $0, generated by GNU Autoconf 2.69, with options \\"\$ac_cs_config\\" @@ -18104,7 +18134,7 @@ # # INIT-COMMANDS # -AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir" +AMDEP_TRUE="$AMDEP_TRUE" MAKE="${MAKE-make}" # The HP-UX ksh and POSIX shell print the target directory to stdout @@ -18156,6 +18186,7 @@ DLLTOOL='`$ECHO "$DLLTOOL" | $SED "$delay_single_quote_subst"`' sharedlib_from_linklib_cmd='`$ECHO "$sharedlib_from_linklib_cmd" | $SED "$delay_single_quote_subst"`' AR='`$ECHO "$AR" | $SED "$delay_single_quote_subst"`' +lt_ar_flags='`$ECHO "$lt_ar_flags" | $SED "$delay_single_quote_subst"`' AR_FLAGS='`$ECHO "$AR_FLAGS" | $SED "$delay_single_quote_subst"`' archiver_list_spec='`$ECHO "$archiver_list_spec" | $SED "$delay_single_quote_subst"`' STRIP='`$ECHO "$STRIP" | $SED "$delay_single_quote_subst"`' @@ -18338,7 +18369,6 @@ DLLTOOL \ sharedlib_from_linklib_cmd \ AR \ -AR_FLAGS \ archiver_list_spec \ STRIP \ RANLIB \ @@ -19103,29 +19133,35 @@ # Older Autoconf quotes --file arguments for eval, but not when files # are listed without --file. Let's play safe and only enable the eval # if we detect the quoting. - case $CONFIG_FILES in - *\'*) eval set x "$CONFIG_FILES" ;; - *) set x $CONFIG_FILES ;; - esac + # TODO: see whether this extra hack can be removed once we start + # requiring Autoconf 2.70 or later. + case $CONFIG_FILES in #( + *\'*) : + eval set x "$CONFIG_FILES" ;; #( + *) : + set x $CONFIG_FILES ;; #( + *) : + ;; +esac shift - for mf + # Used to flag and report bootstrapping failures. + am_rc=0 + for am_mf do # Strip MF so we end up with the name of the file. - mf=`echo "$mf" | sed -e 's/:.*$//'` - # Check whether this is an Automake generated Makefile or not. - # We used to match only the files named 'Makefile.in', but - # some people rename them; so instead we look at the file content. - # Grep'ing the first line is not enough: some people post-process - # each Makefile.in and add a new line on top of each file to say so. - # Grep'ing the whole file is not good either: AIX grep has a line + am_mf=`$as_echo "$am_mf" | sed -e 's/:.*$//'` + # Check whether this is an Automake generated Makefile which includes + # dependency-tracking related rules and includes. + # Grep'ing the whole file directly is not great: AIX grep has a line # limit of 2048, but all sed's we know have understand at least 4000. - if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then - dirpart=`$as_dirname -- "$mf" || -$as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$mf" : 'X\(//\)[^/]' \| \ - X"$mf" : 'X\(//\)$' \| \ - X"$mf" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X"$mf" | + sed -n 's,^am--depfiles:.*,X,p' "$am_mf" | grep X >/dev/null 2>&1 \ + || continue + am_dirpart=`$as_dirname -- "$am_mf" || +$as_expr X"$am_mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$am_mf" : 'X\(//\)[^/]' \| \ + X"$am_mf" : 'X\(//\)$' \| \ + X"$am_mf" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$am_mf" | sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/ q @@ -19143,53 +19179,48 @@ q } s/.*/./; q'` - else - continue - fi - # Extract the definition of DEPDIR, am__include, and am__quote - # from the Makefile without running 'make'. - DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` - test -z "$DEPDIR" && continue - am__include=`sed -n 's/^am__include = //p' < "$mf"` - test -z "$am__include" && continue - am__quote=`sed -n 's/^am__quote = //p' < "$mf"` - # Find all dependency output files, they are included files with - # $(DEPDIR) in their names. We invoke sed twice because it is the - # simplest approach to changing $(DEPDIR) to its actual value in the - # expansion. - for file in `sed -n " - s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ - sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g'`; do - # Make sure the directory exists. - test -f "$dirpart/$file" && continue - fdir=`$as_dirname -- "$file" || -$as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$file" : 'X\(//\)[^/]' \| \ - X"$file" : 'X\(//\)$' \| \ - X"$file" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X"$file" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ + am_filepart=`$as_basename -- "$am_mf" || +$as_expr X/"$am_mf" : '.*/\([^/][^/]*\)/*$' \| \ + X"$am_mf" : 'X\(//\)$' \| \ + X"$am_mf" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X/"$am_mf" | + sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/ q } - /^X\(\/\/\)$/{ + /^X\/\(\/\/\)$/{ s//\1/ q } - /^X\(\/\).*/{ + /^X\/\(\/\).*/{ s//\1/ q } s/.*/./; q'` - as_dir=$dirpart/$fdir; as_fn_mkdir_p - # echo "creating $dirpart/$file" - echo '# dummy' > "$dirpart/$file" - done + { echo "$as_me:$LINENO: cd "$am_dirpart" \ + && sed -e '/# am--include-marker/d' "$am_filepart" \ + | $MAKE -f - am--depfiles" >&5 + (cd "$am_dirpart" \ + && sed -e '/# am--include-marker/d' "$am_filepart" \ + | $MAKE -f - am--depfiles) >&5 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } || am_rc=$? done + if test $am_rc -ne 0; then + { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +as_fn_error $? "Something went wrong bootstrapping makefile fragments + for automatic dependency tracking. Try re-running configure with the + '--disable-dependency-tracking' option to at least be able to build + the package (albeit without support for automatic dependency tracking). +See \`config.log' for more details" "$LINENO" 5; } + fi + { am_dirpart=; unset am_dirpart;} + { am_filepart=; unset am_filepart;} + { am_mf=; unset am_mf;} + { am_rc=; unset am_rc;} + rm -f conftest-deps.mk } ;; "libtool":C) @@ -19351,8 +19382,11 @@ # The archiver. AR=$lt_AR +# Flags to create an archive (by configure). +lt_ar_flags=$lt_ar_flags + # Flags to create an archive. -AR_FLAGS=$lt_AR_FLAGS +AR_FLAGS=\${ARFLAGS-"\$lt_ar_flags"} # How to feed a file listing to the archiver. archiver_list_spec=$lt_archiver_list_spec diff -Nru libvdpau-1.1.1/configure.ac libvdpau-1.2/configure.ac --- libvdpau-1.1.1/configure.ac 2015-08-31 20:59:37.000000000 +0000 +++ libvdpau-1.2/configure.ac 2019-02-28 18:42:55.000000000 +0000 @@ -1,6 +1,6 @@ AC_PREREQ(2.60) -AC_INIT(libvdpau, 1.1.1, [vdpau@lists.freedesktop.org], libvdpau) +AC_INIT(libvdpau, 1.2, [vdpau@lists.freedesktop.org], libvdpau) AM_INIT_AUTOMAKE([dist-bzip2 foreign]) AC_CONFIG_HEADERS(config.h) diff -Nru libvdpau-1.1.1/debian/changelog libvdpau-1.2/debian/changelog --- libvdpau-1.1.1/debian/changelog 2016-02-19 13:07:45.000000000 +0000 +++ libvdpau-1.2/debian/changelog 2019-02-28 22:00:00.000000000 +0000 @@ -1,3 +1,9 @@ +libvdpau (1.2-0ubuntu0~gpu16.04.1) xenial; urgency=medium + + * New upstream release + + -- Michael Marley Thu, 28 Feb 2019 17:00:00 -0500 + libvdpau (1.1.1-3ubuntu1) xenial; urgency=medium * control: Demote libvdpau-va-gl1 from vdpau-driver-all Depends to diff -Nru libvdpau-1.1.1/debian/patches/link-with-libx11.patch libvdpau-1.2/debian/patches/link-with-libx11.patch --- libvdpau-1.1.1/debian/patches/link-with-libx11.patch 2015-10-28 23:47:48.000000000 +0000 +++ libvdpau-1.2/debian/patches/link-with-libx11.patch 2019-02-28 22:00:00.000000000 +0000 @@ -14,9 +14,11 @@ in warnings during the package build (and possibly errors later with better linkers). ---- a/src/Makefile.am -+++ b/src/Makefile.am -@@ -22,7 +22,8 @@ endif +Index: libvdpau-1.2/src/Makefile.am +=================================================================== +--- libvdpau-1.2.orig/src/Makefile.am ++++ libvdpau-1.2/src/Makefile.am +@@ -23,7 +23,8 @@ endif libvdpau_la_LIBADD = \ $(DLOPEN_LIBS) \ $(PTHREAD_LIBS) \ diff -Nru libvdpau-1.1.1/debian/patches/missing-configh-include.patch libvdpau-1.2/debian/patches/missing-configh-include.patch --- libvdpau-1.1.1/debian/patches/missing-configh-include.patch 2015-10-28 23:47:48.000000000 +0000 +++ libvdpau-1.2/debian/patches/missing-configh-include.patch 1970-01-01 00:00:00.000000000 +0000 @@ -1,28 +0,0 @@ -From: Rico Tzschichholz -Date: Tue, 1 Sep 2015 10:45:11 +0200 -Subject: mesa_dri2: Add missing include of config.h to define _GNU_SOURCE - -Fix build with -Wimplicit-function-declaration while secure_getenv() is -guarded by __USE_GNU. - -Reviewed-by: Aaron Plattner -Tested-by: Stefan Dirsch -(cherry picked from commit 1cda354bdfd0c9ca107293b84b52f4464fdbedcc) ---- - src/mesa_dri2.c | 3 +++ - 1 file changed, 3 insertions(+) - -diff --git a/src/mesa_dri2.c b/src/mesa_dri2.c -index 51e8794..420ccee 100644 ---- a/src/mesa_dri2.c -+++ b/src/mesa_dri2.c -@@ -33,6 +33,9 @@ - * and José Hiram Soltren (jsoltren@nvidia.com) - */ - -+#ifdef HAVE_CONFIG_H -+#include "config.h" -+#endif - - #define NEED_REPLIES - #include diff -Nru libvdpau-1.1.1/debian/patches/series libvdpau-1.2/debian/patches/series --- libvdpau-1.1.1/debian/patches/series 2015-10-28 23:47:48.000000000 +0000 +++ libvdpau-1.2/debian/patches/series 2019-02-28 22:00:00.000000000 +0000 @@ -2,4 +2,3 @@ simplify-dlopen-path-length-error-handling.patch vdpau-module-searchpath.patch doxygen-no-timestamps.patch -missing-configh-include.patch diff -Nru libvdpau-1.1.1/debian/patches/simplify-dlopen-path-length-error-handling.patch libvdpau-1.2/debian/patches/simplify-dlopen-path-length-error-handling.patch --- libvdpau-1.1.1/debian/patches/simplify-dlopen-path-length-error-handling.patch 2015-10-28 23:47:48.000000000 +0000 +++ libvdpau-1.2/debian/patches/simplify-dlopen-path-length-error-handling.patch 2019-02-28 22:00:00.000000000 +0000 @@ -3,8 +3,10 @@ "path too long" is not a fatal error, there may be other search paths that don't overflow, so try them as well ---- a/src/vdpau_wrapper.c -+++ b/src/vdpau_wrapper.c +Index: libvdpau-1.2/src/vdpau_wrapper.c +=================================================================== +--- libvdpau-1.2.orig/src/vdpau_wrapper.c ++++ libvdpau-1.2/src/vdpau_wrapper.c @@ -132,6 +132,8 @@ static VdpStatus _vdp_open_driver( vdpau_driver = "nvidia"; } @@ -14,7 +16,7 @@ /* Don't allow setuid apps to use VDPAU_DRIVER_PATH */ vdpau_driver_path = secure_getenv("VDPAU_DRIVER_PATH"); if (vdpau_driver_path && -@@ -141,12 +143,6 @@ static VdpStatus _vdp_open_driver( +@@ -148,12 +150,6 @@ static VdpStatus _vdp_open_driver( DRIVER_LIB_FORMAT, VDPAU_MODULEDIR, vdpau_driver) >= sizeof(vdpau_driver_lib)) { fprintf(stderr, "Failed to construct driver path: path too long\n"); @@ -27,7 +29,7 @@ } else { _vdp_driver_dll = dlopen(vdpau_driver_lib, RTLD_NOW | RTLD_GLOBAL); -@@ -154,11 +150,12 @@ static VdpStatus _vdp_open_driver( +@@ -161,11 +157,12 @@ static VdpStatus _vdp_open_driver( } if (!_vdp_driver_dll) { diff -Nru libvdpau-1.1.1/debian/patches/vdpau-module-searchpath.patch libvdpau-1.2/debian/patches/vdpau-module-searchpath.patch --- libvdpau-1.1.1/debian/patches/vdpau-module-searchpath.patch 2015-10-28 23:47:48.000000000 +0000 +++ libvdpau-1.2/debian/patches/vdpau-module-searchpath.patch 2019-02-28 22:00:00.000000000 +0000 @@ -3,9 +3,11 @@ start searching the vdpau module in ${ORIGIN}/vdpau, then the MODULEDIR and finally fall back to /usr/lib/vdpau ---- a/src/vdpau_wrapper.c -+++ b/src/vdpau_wrapper.c -@@ -103,6 +103,13 @@ static char * _vdp_get_driver_name_from_ +Index: libvdpau-1.2/src/vdpau_wrapper.c +=================================================================== +--- libvdpau-1.2.orig/src/vdpau_wrapper.c ++++ libvdpau-1.2/src/vdpau_wrapper.c +@@ -107,6 +107,13 @@ static char * _vdp_get_driver_name_from_ return driver_name; } @@ -19,7 +21,7 @@ static VdpStatus _vdp_open_driver( Display * display, int screen) -@@ -117,6 +127,7 @@ static VdpStatus _vdp_open_driver( +@@ -117,6 +124,7 @@ static VdpStatus _vdp_open_driver( char vdpau_driver_lib[PATH_MAX]; char const * vdpau_trace; char const * func_name; @@ -27,7 +29,7 @@ vdpau_driver = secure_getenv("VDPAU_DRIVER"); if (vdpau_driver) { -@@ -138,9 +146,11 @@ static VdpStatus _vdp_open_driver( +@@ -145,9 +153,11 @@ static VdpStatus _vdp_open_driver( /* Fallback to VDPAU_MODULEDIR when VDPAU_DRIVER_PATH is not set, * or if we fail to create the driver path/dlopen the library. */ diff -Nru libvdpau-1.1.1/depcomp libvdpau-1.2/depcomp --- libvdpau-1.1.1/depcomp 2015-08-31 21:00:08.000000000 +0000 +++ libvdpau-1.2/depcomp 2019-02-28 18:40:58.000000000 +0000 @@ -1,9 +1,9 @@ #! /bin/sh # depcomp - compile a program generating dependencies as side-effects -scriptversion=2013-05-30.07; # UTC +scriptversion=2018-03-07.03; # UTC -# Copyright (C) 1999-2014 Free Software Foundation, Inc. +# Copyright (C) 1999-2018 Free Software Foundation, Inc. # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by @@ -16,7 +16,7 @@ # GNU General Public License for more details. # You should have received a copy of the GNU General Public License -# along with this program. If not, see . +# along with this program. If not, see . # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a @@ -783,9 +783,9 @@ # Local Variables: # mode: shell-script # sh-indentation: 2 -# eval: (add-hook 'write-file-hooks 'time-stamp) +# eval: (add-hook 'before-save-hook 'time-stamp) # time-stamp-start: "scriptversion=" # time-stamp-format: "%:y-%02m-%02d.%02H" -# time-stamp-time-zone: "UTC" +# time-stamp-time-zone: "UTC0" # time-stamp-end: "; # UTC" # End: diff -Nru libvdpau-1.1.1/doc/Makefile.in libvdpau-1.2/doc/Makefile.in --- libvdpau-1.1.1/doc/Makefile.in 2015-08-31 21:00:08.000000000 +0000 +++ libvdpau-1.2/doc/Makefile.in 2019-02-28 18:43:03.000000000 +0000 @@ -1,7 +1,7 @@ -# Makefile.in generated by automake 1.15 from Makefile.am. +# Makefile.in generated by automake 1.16.1 from Makefile.am. # @configure_input@ -# Copyright (C) 1994-2014 Free Software Foundation, Inc. +# Copyright (C) 1994-2018 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -285,8 +285,8 @@ *config.status*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ *) \ - echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ - cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ + echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles)'; \ + cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles);; \ esac; $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) @@ -310,7 +310,10 @@ cscope cscopelist: -distdir: $(DISTFILES) +distdir: $(BUILT_SOURCES) + $(MAKE) $(AM_MAKEFLAGS) distdir-am + +distdir-am: $(DISTFILES) @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ list='$(DISTFILES)'; \ diff -Nru libvdpau-1.1.1/include/vdpau/vdpau.h libvdpau-1.2/include/vdpau/vdpau.h --- libvdpau-1.1.1/include/vdpau/vdpau.h 2015-05-11 19:55:31.000000000 +0000 +++ libvdpau-1.2/include/vdpau/vdpau.h 2019-02-04 20:06:18.000000000 +0000 @@ -838,13 +838,66 @@ */ typedef uint32_t VdpChromaType; -/** \hideinitializer \brief 4:2:0 chroma format. */ +/** \hideinitializer \brief 4:2:0 chroma format. Undefined field/frame based + * Video surfaces allocated with this chroma type have undefined + * field/frame structure. The implementation is free to internally morph + * the surface between frame/field(NV12/NV24) as required by + * VdpVideoDecoder operation. Interop with OpenGL allows registration + * of these surfaces for either field- or frame-based interop. But, an implicit + * field/frame structure conversion may be performed. + */ #define VDP_CHROMA_TYPE_420 ((VdpChromaType)0) -/** \hideinitializer \brief 4:2:2 chroma format. */ +/** \hideinitializer \brief 4:2:2 chroma format. Undefined field/frame based + * Video surfaces allocated with this chroma type have undefined + * field/frame structure. The implementation is free to internally morph + * the surface between frame/field(NV12/NV24) as required by + * VdpVideoDecoder operation. Interop with OpenGL allows registration + * of these surfaces for either field- or frame-based interop. But, an implicit + * field/frame structure conversion may be performed. + */ #define VDP_CHROMA_TYPE_422 ((VdpChromaType)1) -/** \hideinitializer \brief 4:4:4 chroma format. */ +/** \hideinitializer \brief 4:4:4 chroma format. Undefined field/frame based + * Video surfaces allocated with this chroma type have undefined + * field/frame structure. The implementation is free to internally morph + * the surface between frame/field(NV12/NV24) as required by + * VdpVideoDecoder operation. Interop with OpenGL allows registration + * of these surfaces for either field- or frame-based interop. But, an implicit + * field/frame structure conversion may be performed. + */ #define VDP_CHROMA_TYPE_444 ((VdpChromaType)2) +/** \hideinitializer \brief 4:2:0 chroma format. Field based. + * Video surfaces allocated with this chroma type can only be + * interoped with OpenGL if the matching field/frame structure is + * specified in the OpenGL API */ +#define VDP_CHROMA_TYPE_420_FIELD ((VdpChromaType)3) +/** \hideinitializer \brief 4:2:2 chroma format. Field based. + * Video surfaces allocated with this chroma type can only be + * interoped with OpenGL if the matching field/frame structure is + * specified in the OpenGL API */ +#define VDP_CHROMA_TYPE_422_FIELD ((VdpChromaType)4) +/** \hideinitializer \brief 4:4:4 chroma format. Field based. + * Video surfaces allocated with this chroma type can only be + * interoped with OpenGL if the matching field/frame structure is + * specified in the OpenGL API */ +#define VDP_CHROMA_TYPE_444_FIELD ((VdpChromaType)5) + +/** \hideinitializer \brief 4:2:0 chroma format. Frame based. + * Video surfaces allocated with this chroma type can only be + * interoped with OpenGL if the matching field/frame structure is + * specified in the OpenGL API */ +#define VDP_CHROMA_TYPE_420_FRAME ((VdpChromaType)6) +/** \hideinitializer \brief 4:2:2 chroma format. Frame based. + * Video surfaces allocated with this chroma type can only be + * interoped with OpenGL if the matching field/frame structure is + * specified in the OpenGL API */ +#define VDP_CHROMA_TYPE_422_FRAME ((VdpChromaType)7) +/** \hideinitializer \brief 4:4:4 chroma format. Frame based. + * Video surfaces allocated with this chroma type can only be + * interoped with OpenGL if the matching field/frame structure is + * specified in the OpenGL API */ +#define VDP_CHROMA_TYPE_444_FRAME ((VdpChromaType)8) + /** * \brief The set of all known YCbCr surface formats. */ @@ -930,6 +983,32 @@ * Applications should access this data via a uint32_t pointer. */ #define VDP_YCBCR_FORMAT_V8U8Y8A8 ((VdpYCbCrFormat)5) +/** + * \hideinitializer + * \brief The "Y_UV_444" YCbCr surface format. + * + * This format has two planes, a Y plane and a UV plane. + * + * The Y plane is an array of byte-sized Y components. + * Applications should access this data via a uint8_t pointer. + * + * The UV plane is an array of interleaved byte-sized U and V + * components, in the order U, V, U, V. Applications should + * access this data via a uint8_t pointer. + */ +#define VDP_YCBCR_FORMAT_Y_UV_444 ((VdpYCbCrFormat)6) +/** + * \hideinitializer + * \brief The "Y_U_V_444" YCbCr surface format. + * + * This format has three planes, a Y plane, a V plane, and a U + * plane. + * + * Each of the planes is an array of byte-sized components. + * + * Applications should access this data via a uint8_t pointer. + */ +#define VDP_YCBCR_FORMAT_Y_U_V_444 ((VdpYCbCrFormat)7) /** * \brief The set of all known RGB surface formats. @@ -1704,7 +1783,7 @@ * - The Hardware that implements \ref VdpPresentationQueue * "VdpPresentationQueue" functionality, * - * VdpVideoSurfaces are directly displayable using a \ref + * VdpOutputSurfaces are directly displayable using a \ref * VdpPresentationQueue "VdpPresentationQueue" object. * * @{ @@ -2620,6 +2699,46 @@ /** \hideinitializer */ #define VDP_DECODER_LEVEL_HEVC_6_2 186 +typedef enum { + VDP_VIDEO_SURFACE_FIELD_STRUCTURE = (1 << 0), + VDP_VIDEO_SURFACE_FRAME_STRUCTURE = (1 << 1) +} VdpVideoSurfaceSupportedPictureStructure; + +typedef enum { + VDP_DECODER_PROFILE_MAX_LEVEL = 0, + VDP_DECODER_PROFILE_MAX_MACROBLOCKS = 1, + VDP_DECODER_PROFILE_MAX_WIDTH = 2, + VDP_DECODER_PROFILE_MAX_HEIGHT = 3, + VDP_DECODER_PROFILE_SUPPORTED_PICTURE_STRUCTURE = 4, + /** + * A list of supported chroma types, stored as a bitmask of 1 shifted + * by each supported VdpChromaType value. E.g., + * (1 << VDP_CHROMA_TYPE_420) | + * (1 << VDP_CHROMA_TYPE_422) | + * (1 << VDP_CHROMA_TYPE_444) + */ + VDP_DECODER_PROFILE_SUPPORTED_CHROMA_TYPES = 5 +} VdpDecoderCapability; + +/** + * \brief Query the supported value of the requested capability, for + * the specified profile on the specified device. + * \param[in] device The device to query. + * \param[in] profile The decoder profile for which information is requested. + * \param[in] capability The decoder profile capability for which the value + * is requested. + * \param[out] capability_value The value of the requested capability. + * \return VdpStatus The completion status of the operation. + */ + +typedef VdpStatus VdpDecoderQueryProfileCapability( + VdpDevice device, + VdpDecoderProfile profile, + /* output parameters follow */ + VdpDecoderCapability capability, + void * capability_value +); + /** * \brief Query the implementation's VdpDecoder capabilities. * \param[in] device The device to query. @@ -3300,6 +3419,64 @@ } VdpPictureInfoHEVC; /** + * \brief Picture parameter information for an HEVC 444 picture. + * + * Note: VDPAU clients must use VdpPictureInfoHEVC444 to describe the + * attributes of a frame being decoded with + * VDP_DECODER_PROFILE_HEVC_MAIN_444. + */ +typedef struct { + /** \ref VdpPictureInfoHEVC struct. */ + VdpPictureInfoHEVC pictureInfo; + + /* SPS Range Extensions for Main 444, Main 10, etc. */ + uint8_t sps_range_extension_flag; + /* sps extension for transform_skip_rotation_enabled_flag */ + uint8_t transformSkipRotationEnableFlag; + /* sps extension for transform_skip_context_enabled_flag */ + uint8_t transformSkipContextEnableFlag; + /* sps implicit_rdpcm_enabled_flag */ + uint8_t implicitRdpcmEnableFlag; + /* sps explicit_rdpcm_enabled_flag */ + uint8_t explicitRdpcmEnableFlag; + /* sps extended_precision_processing_flag,always 0 in current profile */ + uint8_t extendedPrecisionProcessingFlag; + /* sps intra_smoothing_disabled_flag */ + uint8_t intraSmoothingDisabledFlag; + /* sps high_precision_offsets_enabled_flag */ + uint8_t highPrecisionOffsetsEnableFlag; + /* sps persistent_rice_adaptation_enabled_flag */ + uint8_t persistentRiceAdaptationEnableFlag; + /* sps cabac_bypass_alignment_enabled_flag, always 0 in current profile */ + uint8_t cabacBypassAlignmentEnableFlag; + /* sps intraBlockCopyEnableFlag, always 0 not used by the spec as of now */ + uint8_t intraBlockCopyEnableFlag; + + /* PPS Range Extensions for Main 444, Main 10, etc. */ + uint8_t pps_range_extension_flag; + /* pps extension log2_max_transform_skip_block_size_minus2, 0...5 */ + uint8_t log2MaxTransformSkipSize; + /* pps cross_component_prediction_enabled_flag */ + uint8_t crossComponentPredictionEnableFlag; + /* pps chroma_qp_adjustment_enabled_flag */ + uint8_t chromaQpAdjustmentEnableFlag; + /* pps diff_cu_chroma_qp_adjustment_depth, 0...3 */ + uint8_t diffCuChromaQpAdjustmentDepth; + /* pps chroma_qp_adjustment_table_size_minus1+1, 1...6 */ + uint8_t chromaQpAdjustmentTableSize; + /* pps log2_sao_offset_scale_luma, max(0,bitdepth-10), */ + /* maxBitdepth 16 for future. */ + uint8_t log2SaoOffsetScaleLuma; + /* pps log2_sao_offset_scale_chroma */ + uint8_t log2SaoOffsetScaleChroma; + /* -[12,+12] */ + int8_t cb_qp_adjustment[6]; + /* -[12,+12] */ + int8_t cr_qp_adjustment[6]; + +} VdpPictureInfoHEVC444; + +/** * \brief Decode a compressed field/frame and render the result * into a \ref VdpVideoSurface "VdpVideoSurface". * \param[in] decoder The decoder object that will perform the @@ -4587,6 +4764,8 @@ #define VDP_FUNC_ID_PRESENTATION_QUEUE_QUERY_SURFACE_STATUS ((VdpFuncId)65) /** \hideinitializer */ #define VDP_FUNC_ID_PREEMPTION_CALLBACK_REGISTER ((VdpFuncId)66) +/** \hideinitializer */ +#define VDP_FUNC_ID_DECODER_QUERY_CAPABILITY ((VdpFuncId)67) #define VDP_FUNC_ID_BASE_WINSYS 0x1000 diff -Nru libvdpau-1.1.1/install-sh libvdpau-1.2/install-sh --- libvdpau-1.1.1/install-sh 2015-08-31 21:00:08.000000000 +0000 +++ libvdpau-1.2/install-sh 2019-02-28 18:40:58.000000000 +0000 @@ -1,7 +1,7 @@ #!/bin/sh # install - install a program, script, or datafile -scriptversion=2013-12-25.23; # UTC +scriptversion=2018-03-11.20; # UTC # This originates from X11R5 (mit/util/scripts/install.sh), which was # later released in X11R6 (xc/config/util/install.sh) with the @@ -271,15 +271,18 @@ fi dst=$dst_arg - # If destination is a directory, append the input filename; won't work - # if double slashes aren't ignored. + # If destination is a directory, append the input filename. if test -d "$dst"; then if test "$is_target_a_directory" = never; then echo "$0: $dst_arg: Is a directory" >&2 exit 1 fi dstdir=$dst - dst=$dstdir/`basename "$src"` + dstbase=`basename "$src"` + case $dst in + */) dst=$dst$dstbase;; + *) dst=$dst/$dstbase;; + esac dstdir_status=0 else dstdir=`dirname "$dst"` @@ -288,6 +291,11 @@ fi fi + case $dstdir in + */) dstdirslash=$dstdir;; + *) dstdirslash=$dstdir/;; + esac + obsolete_mkdir_used=false if test $dstdir_status != 0; then @@ -324,34 +332,43 @@ # is incompatible with FreeBSD 'install' when (umask & 300) != 0. ;; *) + # Note that $RANDOM variable is not portable (e.g. dash); Use it + # here however when possible just to lower collision chance. tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$ - trap 'ret=$?; rmdir "$tmpdir/d" "$tmpdir" 2>/dev/null; exit $ret' 0 + trap 'ret=$?; rmdir "$tmpdir/a/b" "$tmpdir/a" "$tmpdir" 2>/dev/null; exit $ret' 0 + + # Because "mkdir -p" follows existing symlinks and we likely work + # directly in world-writeable /tmp, make sure that the '$tmpdir' + # directory is successfully created first before we actually test + # 'mkdir -p' feature. if (umask $mkdir_umask && - exec $mkdirprog $mkdir_mode -p -- "$tmpdir/d") >/dev/null 2>&1 + $mkdirprog $mkdir_mode "$tmpdir" && + exec $mkdirprog $mkdir_mode -p -- "$tmpdir/a/b") >/dev/null 2>&1 then if test -z "$dir_arg" || { # Check for POSIX incompatibilities with -m. # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or # other-writable bit of parent directory when it shouldn't. # FreeBSD 6.1 mkdir -m -p sets mode of existing directory. - ls_ld_tmpdir=`ls -ld "$tmpdir"` + test_tmpdir="$tmpdir/a" + ls_ld_tmpdir=`ls -ld "$test_tmpdir"` case $ls_ld_tmpdir in d????-?r-*) different_mode=700;; d????-?--*) different_mode=755;; *) false;; esac && - $mkdirprog -m$different_mode -p -- "$tmpdir" && { - ls_ld_tmpdir_1=`ls -ld "$tmpdir"` + $mkdirprog -m$different_mode -p -- "$test_tmpdir" && { + ls_ld_tmpdir_1=`ls -ld "$test_tmpdir"` test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1" } } then posix_mkdir=: fi - rmdir "$tmpdir/d" "$tmpdir" + rmdir "$tmpdir/a/b" "$tmpdir/a" "$tmpdir" else # Remove any dirs left behind by ancient mkdir implementations. - rmdir ./$mkdir_mode ./-p ./-- 2>/dev/null + rmdir ./$mkdir_mode ./-p ./-- "$tmpdir" 2>/dev/null fi trap '' 0;; esac;; @@ -427,8 +444,8 @@ else # Make a couple of temp file names in the proper directory. - dsttmp=$dstdir/_inst.$$_ - rmtmp=$dstdir/_rm.$$_ + dsttmp=${dstdirslash}_inst.$$_ + rmtmp=${dstdirslash}_rm.$$_ # Trap to clean up those temp files at exit. trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0 @@ -493,9 +510,9 @@ done # Local variables: -# eval: (add-hook 'write-file-hooks 'time-stamp) +# eval: (add-hook 'before-save-hook 'time-stamp) # time-stamp-start: "scriptversion=" # time-stamp-format: "%:y-%02m-%02d.%02H" -# time-stamp-time-zone: "UTC" +# time-stamp-time-zone: "UTC0" # time-stamp-end: "; # UTC" # End: diff -Nru libvdpau-1.1.1/ltmain.sh libvdpau-1.2/ltmain.sh --- libvdpau-1.1.1/ltmain.sh 2015-08-31 21:00:02.000000000 +0000 +++ libvdpau-1.2/ltmain.sh 2019-02-28 18:40:52.000000000 +0000 @@ -1,12 +1,12 @@ #! /bin/sh ## DO NOT EDIT - This file generated from ./build-aux/ltmain.in -## by inline-source v2014-01-03.01 +## by inline-source v2018-07-24.06 -# libtool (GNU libtool) 2.4.6 +# libtool (GNU libtool) 2.4.6.42-b88ce # Provide generalized library-building support services. # Written by Gordon Matzigkeit , 1996 -# Copyright (C) 1996-2015 Free Software Foundation, Inc. +# Copyright (C) 1996-2018 Free Software Foundation, Inc. # This is free software; see the source for copying conditions. There is NO # warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. @@ -31,8 +31,8 @@ PROGRAM=libtool PACKAGE=libtool -VERSION=2.4.6 -package_revision=2.4.6 +VERSION=2.4.6.42-b88ce +package_revision=2.4.6.42 ## ------ ## @@ -64,34 +64,25 @@ # libraries, which are installed to $pkgauxdir. # Set a version string for this script. -scriptversion=2015-01-20.17; # UTC +scriptversion=2018-07-24.06; # UTC # General shell script boiler plate, and helper functions. # Written by Gary V. Vaughan, 2004 -# Copyright (C) 2004-2015 Free Software Foundation, Inc. -# This is free software; see the source for copying conditions. There is NO -# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. - -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 3 of the License, or -# (at your option) any later version. - -# As a special exception to the GNU General Public License, if you distribute -# this file as part of a program or library that is built using GNU Libtool, -# you may include this file under the same distribution terms that you use -# for the rest of that program. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNES FOR A PARTICULAR PURPOSE. See the GNU -# General Public License for more details. - -# You should have received a copy of the GNU General Public License -# along with this program. If not, see . +# This is free software. There is NO warranty; not even for +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. +# +# Copyright (C) 2004-2018 Bootstrap Authors +# +# This file is dual licensed under the terms of the MIT license +# , and GPL version 3 or later +# . You must apply one of +# these licenses when using or redistributing this software or any of +# the files within it. See the URLs above, or the file `LICENSE` +# included in the Bootstrap distribution for the full license texts. -# Please report bugs or propose patches to gary@gnu.org. +# Please report bugs or propose patches to: +# ## ------ ## @@ -140,9 +131,6 @@ fi" done -# CDPATH. -(unset CDPATH) >/dev/null 2>&1 && unset CDPATH - # Make sure IFS has a sensible default sp=' ' nl=' @@ -159,6 +147,26 @@ fi +# func_unset VAR +# -------------- +# Portably unset VAR. +# In some shells, an 'unset VAR' statement leaves a non-zero return +# status if VAR is already unset, which might be problematic if the +# statement is used at the end of a function (thus poisoning its return +# value) or when 'set -e' is active (causing even a spurious abort of +# the script in this case). +func_unset () +{ + { eval $1=; (eval unset $1) >/dev/null 2>&1 && eval unset $1 || : ; } +} + + +# Make sure CDPATH doesn't cause `cd` commands to output the target dir. +func_unset CDPATH + +# Make sure ${,E,F}GREP behave sanely. +func_unset GREP_OPTIONS + ## ------------------------- ## ## Locate command utilities. ## @@ -259,7 +267,7 @@ rm -f conftest.in conftest.tmp conftest.nl conftest.out } - func_path_progs "sed gsed" func_check_prog_sed $PATH:/usr/xpg4/bin + func_path_progs "sed gsed" func_check_prog_sed "$PATH:/usr/xpg4/bin" rm -f conftest.sed SED=$func_path_progs_result } @@ -295,7 +303,7 @@ rm -f conftest.in conftest.tmp conftest.nl conftest.out } - func_path_progs "grep ggrep" func_check_prog_grep $PATH:/usr/xpg4/bin + func_path_progs "grep ggrep" func_check_prog_grep "$PATH:/usr/xpg4/bin" GREP=$func_path_progs_result } @@ -580,16 +588,16 @@ { $debug_cmd - func_quote_for_eval "$2" - eval "$1+=\\ \$func_quote_for_eval_result" + func_quote_arg pretty "$2" + eval "$1+=\\ \$func_quote_arg_result" }' else func_append_quoted () { $debug_cmd - func_quote_for_eval "$2" - eval "$1=\$$1\\ \$func_quote_for_eval_result" + func_quote_arg pretty "$2" + eval "$1=\$$1\\ \$func_quote_arg_result" } fi @@ -1091,85 +1099,199 @@ } -# func_quote_for_eval ARG... -# -------------------------- -# Aesthetically quote ARGs to be evaled later. -# This function returns two values: -# i) func_quote_for_eval_result -# double-quoted, suitable for a subsequent eval -# ii) func_quote_for_eval_unquoted_result -# has all characters that are still active within double -# quotes backslashified. -func_quote_for_eval () +# func_quote_portable EVAL ARG +# ---------------------------- +# Internal function to portably implement func_quote_arg. Note that we still +# keep attention to performance here so we as much as possible try to avoid +# calling sed binary (so far O(N) complexity as long as func_append is O(1)). +func_quote_portable () { $debug_cmd - func_quote_for_eval_unquoted_result= - func_quote_for_eval_result= - while test 0 -lt $#; do - case $1 in - *[\\\`\"\$]*) - _G_unquoted_arg=`printf '%s\n' "$1" |$SED "$sed_quote_subst"` ;; - *) - _G_unquoted_arg=$1 ;; - esac - if test -n "$func_quote_for_eval_unquoted_result"; then - func_append func_quote_for_eval_unquoted_result " $_G_unquoted_arg" - else - func_append func_quote_for_eval_unquoted_result "$_G_unquoted_arg" + func_quote_portable_result=$2 + + # one-time-loop (easy break) + while true + do + if $1; then + func_quote_portable_result=`$ECHO "$2" | $SED \ + -e "$sed_double_quote_subst" -e "$sed_double_backslash"` + break fi - case $_G_unquoted_arg in - # Double-quote args containing shell metacharacters to delay - # word splitting, command substitution and variable expansion - # for a subsequent eval. - # Many Bourne shells cannot handle close brackets correctly - # in scan sets, so we specify it separately. - *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") - _G_quoted_arg=\"$_G_unquoted_arg\" + # Quote for eval. + case $func_quote_portable_result in + *[\\\`\"\$]*) + case $func_quote_portable_result in + *[\[\*\?]*) + func_quote_portable_result=`$ECHO "$func_quote_portable_result" \ + | $SED "$sed_quote_subst"` + break + ;; + esac + + func_quote_portable_old_IFS=$IFS + for _G_char in '\' '`' '"' '$' + do + # STATE($1) PREV($2) SEPARATOR($3) + set start "" "" + func_quote_portable_result=dummy"$_G_char$func_quote_portable_result$_G_char"dummy + IFS=$_G_char + for _G_part in $func_quote_portable_result + do + case $1 in + quote) + func_append func_quote_portable_result "$3$2" + set quote "$_G_part" "\\$_G_char" + ;; + start) + set first "" "" + func_quote_portable_result= + ;; + first) + set quote "$_G_part" "" + ;; + esac + done + done + IFS=$func_quote_portable_old_IFS ;; - *) - _G_quoted_arg=$_G_unquoted_arg - ;; + *) ;; esac - - if test -n "$func_quote_for_eval_result"; then - func_append func_quote_for_eval_result " $_G_quoted_arg" - else - func_append func_quote_for_eval_result "$_G_quoted_arg" - fi - shift + break done + + func_quote_portable_unquoted_result=$func_quote_portable_result + case $func_quote_portable_result in + # double-quote args containing shell metacharacters to delay + # word splitting, command substitution and variable expansion + # for a subsequent eval. + # many bourne shells cannot handle close brackets correctly + # in scan sets, so we specify it separately. + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") + func_quote_portable_result=\"$func_quote_portable_result\" + ;; + esac } -# func_quote_for_expand ARG -# ------------------------- -# Aesthetically quote ARG to be evaled later; same as above, -# but do not quote variable references. -func_quote_for_expand () -{ - $debug_cmd +# func_quotefast_eval ARG +# ----------------------- +# Quote one ARG (internal). This is equivalent to 'func_quote_arg eval ARG', +# but optimized for speed. Result is stored in $func_quotefast_eval. +if test xyes = `(x=; printf -v x %q yes; echo x"$x") 2>/dev/null`; then + printf -v _GL_test_printf_tilde %q '~' + if test '\~' = "$_GL_test_printf_tilde"; then + func_quotefast_eval () + { + printf -v func_quotefast_eval_result %q "$1" + } + else + # Broken older Bash implementations. Make those faster too if possible. + func_quotefast_eval () + { + case $1 in + '~'*) + func_quote_portable false "$1" + func_quotefast_eval_result=$func_quote_portable_result + ;; + *) + printf -v func_quotefast_eval_result %q "$1" + ;; + esac + } + fi +else + func_quotefast_eval () + { + func_quote_portable false "$1" + func_quotefast_eval_result=$func_quote_portable_result + } +fi - case $1 in - *[\\\`\"]*) - _G_arg=`$ECHO "$1" | $SED \ - -e "$sed_double_quote_subst" -e "$sed_double_backslash"` ;; - *) - _G_arg=$1 ;; + +# func_quote_arg MODEs ARG +# ------------------------ +# Quote one ARG to be evaled later. MODEs argument may contain zero or more +# specifiers listed below separated by ',' character. This function returns two +# values: +# i) func_quote_arg_result +# double-quoted (when needed), suitable for a subsequent eval +# ii) func_quote_arg_unquoted_result +# has all characters that are still active within double +# quotes backslashified. Available only if 'unquoted' is specified. +# +# Available modes: +# ---------------- +# 'eval' (default) +# - escape shell special characters +# 'expand' +# - the same as 'eval'; but do not quote variable references +# 'pretty' +# - request aesthetic output, i.e. '"a b"' instead of 'a\ b'. This might +# be used later in func_quote to get output like: 'echo "a b"' instead +# of 'echo a\ b'. This is slower than default on some shells. +# 'unquoted' +# - produce also $func_quote_arg_unquoted_result which does not contain +# wrapping double-quotes. +# +# Examples for 'func_quote_arg pretty,unquoted string': +# +# string | *_result | *_unquoted_result +# ------------+-----------------------+------------------- +# " | \" | \" +# a b | "a b" | a b +# "a b" | "\"a b\"" | \"a b\" +# * | "*" | * +# z="${x-$y}" | "z=\"\${x-\$y}\"" | z=\"\${x-\$y}\" +# +# Examples for 'func_quote_arg pretty,unquoted,expand string': +# +# string | *_result | *_unquoted_result +# --------------+---------------------+-------------------- +# z="${x-$y}" | "z=\"${x-$y}\"" | z=\"${x-$y}\" +func_quote_arg () +{ + _G_quote_expand=false + case ,$1, in + *,expand,*) + _G_quote_expand=: + ;; esac - case $_G_arg in - # Double-quote args containing shell metacharacters to delay - # word splitting and command substitution for a subsequent eval. - # Many Bourne shells cannot handle close brackets correctly - # in scan sets, so we specify it separately. - *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") - _G_arg=\"$_G_arg\" + case ,$1, in + *,pretty,*|*,expand,*|*,unquoted,*) + func_quote_portable $_G_quote_expand "$2" + func_quote_arg_result=$func_quote_portable_result + func_quote_arg_unquoted_result=$func_quote_portable_unquoted_result + ;; + *) + # Faster quote-for-eval for some shells. + func_quotefast_eval "$2" + func_quote_arg_result=$func_quotefast_eval_result ;; esac +} + - func_quote_for_expand_result=$_G_arg +# func_quote MODEs ARGs... +# ------------------------ +# Quote all ARGs to be evaled later and join them into single command. See +# func_quote_arg's description for more info. +func_quote () +{ + $debug_cmd + _G_func_quote_mode=$1 ; shift + func_quote_result= + while test 0 -lt $#; do + func_quote_arg "$_G_func_quote_mode" "$1" + if test -n "$func_quote_result"; then + func_append func_quote_result " $func_quote_arg_result" + else + func_append func_quote_result "$func_quote_arg_result" + fi + shift + done } @@ -1215,8 +1337,8 @@ _G_cmd=$1 _G_fail_exp=${2-':'} - func_quote_for_expand "$_G_cmd" - eval "func_notquiet $func_quote_for_expand_result" + func_quote_arg pretty,expand "$_G_cmd" + eval "func_notquiet $func_quote_arg_result" $opt_dry_run || { eval "$_G_cmd" @@ -1241,8 +1363,8 @@ _G_fail_exp=${2-':'} $opt_quiet || { - func_quote_for_expand "$_G_cmd" - eval "func_echo $func_quote_for_expand_result" + func_quote_arg expand,pretty "$_G_cmd" + eval "func_echo $func_quote_arg_result" } $opt_dry_run || { @@ -1369,30 +1491,26 @@ # End: #! /bin/sh -# Set a version string for this script. -scriptversion=2014-01-07.03; # UTC - # A portable, pluggable option parser for Bourne shell. # Written by Gary V. Vaughan, 2010 -# Copyright (C) 2010-2015 Free Software Foundation, Inc. -# This is free software; see the source for copying conditions. There is NO -# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. - -# This program is free software: you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation, either version 3 of the License, or -# (at your option) any later version. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. +# This is free software. There is NO warranty; not even for +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. +# +# Copyright (C) 2010-2018 Bootstrap Authors +# +# This file is dual licensed under the terms of the MIT license +# , and GPL version 3 or later +# . You must apply one of +# these licenses when using or redistributing this software or any of +# the files within it. See the URLs above, or the file `LICENSE` +# included in the Bootstrap distribution for the full license texts. -# You should have received a copy of the GNU General Public License -# along with this program. If not, see . +# Please report bugs or propose patches to: +# -# Please report bugs or propose patches to gary@gnu.org. +# Set a version string for this script. +scriptversion=2018-07-24.06; # UTC ## ------ ## @@ -1415,7 +1533,7 @@ # # In order for the '--version' option to work, you will need to have a # suitably formatted comment like the one at the top of this file -# starting with '# Written by ' and ending with '# warranty; '. +# starting with '# Written by ' and ending with '# Copyright'. # # For '-h' and '--help' to work, you will also need a one line # description of your script's purpose in a comment directly above the @@ -1427,7 +1545,7 @@ # to display verbose messages only when your user has specified # '--verbose'. # -# After sourcing this file, you can plug processing for additional +# After sourcing this file, you can plug in processing for additional # options by amending the variables from the 'Configuration' section # below, and following the instructions in the 'Option parsing' # section further down. @@ -1476,8 +1594,8 @@ ## ------------------------- ## # This section contains functions for adding, removing, and running hooks -# to the main code. A hook is just a named list of of function, that can -# be run in order later on. +# in the main code. A hook is just a list of function names that can be +# run in order later on. # func_hookable FUNC_NAME # ----------------------- @@ -1510,7 +1628,8 @@ # func_remove_hook FUNC_NAME HOOK_FUNC # ------------------------------------ -# Remove HOOK_FUNC from the list of functions called by FUNC_NAME. +# Remove HOOK_FUNC from the list of hook functions to be called by +# FUNC_NAME. func_remove_hook () { $debug_cmd @@ -1519,10 +1638,28 @@ } +# func_propagate_result FUNC_NAME_A FUNC_NAME_B +# --------------------------------------------- +# If the *_result variable of FUNC_NAME_A _is set_, assign its value to +# *_result variable of FUNC_NAME_B. +func_propagate_result () +{ + $debug_cmd + + func_propagate_result_result=: + if eval "test \"\${${1}_result+set}\" = set" + then + eval "${2}_result=\$${1}_result" + else + func_propagate_result_result=false + fi +} + + # func_run_hooks FUNC_NAME [ARG]... # --------------------------------- # Run all hook functions registered to FUNC_NAME. -# It is assumed that the list of hook functions contains nothing more +# It's assumed that the list of hook functions contains nothing more # than a whitespace-delimited list of legal shell function names, and # no effort is wasted trying to catch shell meta-characters or preserve # whitespace. @@ -1532,22 +1669,19 @@ case " $hookable_fns " in *" $1 "*) ;; - *) func_fatal_error "'$1' does not support hook funcions.n" ;; + *) func_fatal_error "'$1' does not support hook functions." ;; esac eval _G_hook_fns=\$$1_hooks; shift for _G_hook in $_G_hook_fns; do - eval $_G_hook '"$@"' - - # store returned options list back into positional - # parameters for next 'cmd' execution. - eval _G_hook_result=\$${_G_hook}_result - eval set dummy "$_G_hook_result"; shift + func_unset "${_G_hook}_result" + eval $_G_hook '${1+"$@"}' + func_propagate_result $_G_hook func_run_hooks + if $func_propagate_result_result; then + eval set dummy "$func_run_hooks_result"; shift + fi done - - func_quote_for_eval ${1+"$@"} - func_run_hooks_result=$func_quote_for_eval_result } @@ -1557,10 +1691,18 @@ ## --------------- ## # In order to add your own option parsing hooks, you must accept the -# full positional parameter list in your hook function, remove any -# options that you action, and then pass back the remaining unprocessed -# options in '_result', escaped suitably for -# 'eval'. Like this: +# full positional parameter list from your hook function. You may remove +# or edit any options that you action, and then pass back the remaining +# unprocessed options in '_result', escaped +# suitably for 'eval'. +# +# The '_result' variable is automatically unset +# before your hook gets called; for best performance, only set the +# *_result variable when necessary (i.e. don't call the 'func_quote' +# function unnecessarily because it can be an expensive operation on some +# machines). +# +# Like this: # # my_options_prep () # { @@ -1570,9 +1712,8 @@ # usage_message=$usage_message' # -s, --silent don'\''t print informational messages # ' -# -# func_quote_for_eval ${1+"$@"} -# my_options_prep_result=$func_quote_for_eval_result +# # No change in '$@' (ignored completely by this hook). Leave +# # my_options_prep_result variable intact. # } # func_add_hook func_options_prep my_options_prep # @@ -1581,25 +1722,36 @@ # { # $debug_cmd # -# # Note that for efficiency, we parse as many options as we can +# args_changed=false +# +# # Note that, for efficiency, we parse as many options as we can # # recognise in a loop before passing the remainder back to the # # caller on the first unrecognised argument we encounter. # while test $# -gt 0; do # opt=$1; shift # case $opt in -# --silent|-s) opt_silent=: ;; +# --silent|-s) opt_silent=: +# args_changed=: +# ;; # # Separate non-argument short options: # -s*) func_split_short_opt "$_G_opt" # set dummy "$func_split_short_opt_name" \ # "-$func_split_short_opt_arg" ${1+"$@"} # shift +# args_changed=: # ;; -# *) set dummy "$_G_opt" "$*"; shift; break ;; +# *) # Make sure the first unrecognised option "$_G_opt" +# # is added back to "$@" in case we need it later, +# # if $args_changed was set to 'true'. +# set dummy "$_G_opt" ${1+"$@"}; shift; break ;; # esac # done # -# func_quote_for_eval ${1+"$@"} -# my_silent_option_result=$func_quote_for_eval_result +# # Only call 'func_quote' here if we processed at least one argument. +# if $args_changed; then +# func_quote eval ${1+"$@"} +# my_silent_option_result=$func_quote_result +# fi # } # func_add_hook func_parse_options my_silent_option # @@ -1610,17 +1762,26 @@ # # $opt_silent && $opt_verbose && func_fatal_help "\ # '--silent' and '--verbose' options are mutually exclusive." -# -# func_quote_for_eval ${1+"$@"} -# my_option_validation_result=$func_quote_for_eval_result # } # func_add_hook func_validate_options my_option_validation # -# You'll alse need to manually amend $usage_message to reflect the extra +# You'll also need to manually amend $usage_message to reflect the extra # options you parse. It's preferable to append if you can, so that # multiple option parsing hooks can be added safely. +# func_options_finish [ARG]... +# ---------------------------- +# Finishing the option parse loop (call 'func_options' hooks ATM). +func_options_finish () +{ + $debug_cmd + + func_run_hooks func_options ${1+"$@"} + func_propagate_result func_run_hooks func_options_finish +} + + # func_options [ARG]... # --------------------- # All the functions called inside func_options are hookable. See the @@ -1630,17 +1791,27 @@ { $debug_cmd - func_options_prep ${1+"$@"} - eval func_parse_options \ - ${func_options_prep_result+"$func_options_prep_result"} - eval func_validate_options \ - ${func_parse_options_result+"$func_parse_options_result"} + _G_options_quoted=false - eval func_run_hooks func_options \ - ${func_validate_options_result+"$func_validate_options_result"} + for my_func in options_prep parse_options validate_options options_finish + do + func_unset func_${my_func}_result + func_unset func_run_hooks_result + eval func_$my_func '${1+"$@"}' + func_propagate_result func_$my_func func_options + if $func_propagate_result_result; then + eval set dummy "$func_options_result"; shift + _G_options_quoted=: + fi + done - # save modified positional parameters for caller - func_options_result=$func_run_hooks_result + $_G_options_quoted || { + # As we (func_options) are top-level options-parser function and + # nobody quoted "$@" for us yet, we need to do it explicitly for + # caller. + func_quote eval ${1+"$@"} + func_options_result=$func_quote_result + } } @@ -1649,9 +1820,8 @@ # All initialisations required before starting the option parse loop. # Note that when calling hook functions, we pass through the list of # positional parameters. If a hook function modifies that list, and -# needs to propogate that back to rest of this script, then the complete -# modified list must be put in 'func_run_hooks_result' before -# returning. +# needs to propagate that back to rest of this script, then the complete +# modified list must be put in 'func_run_hooks_result' before returning. func_hookable func_options_prep func_options_prep () { @@ -1662,9 +1832,7 @@ opt_warning_types= func_run_hooks func_options_prep ${1+"$@"} - - # save modified positional parameters for caller - func_options_prep_result=$func_run_hooks_result + func_propagate_result func_run_hooks func_options_prep } @@ -1676,25 +1844,32 @@ { $debug_cmd - func_parse_options_result= - + _G_parse_options_requote=false # this just eases exit handling while test $# -gt 0; do # Defer to hook functions for initial option parsing, so they # get priority in the event of reusing an option name. func_run_hooks func_parse_options ${1+"$@"} - - # Adjust func_parse_options positional parameters to match - eval set dummy "$func_run_hooks_result"; shift + func_propagate_result func_run_hooks func_parse_options + if $func_propagate_result_result; then + eval set dummy "$func_parse_options_result"; shift + # Even though we may have changed "$@", we passed the "$@" array + # down into the hook and it quoted it for us (because we are in + # this if-branch). No need to quote it again. + _G_parse_options_requote=false + fi # Break out of the loop if we already parsed every option. test $# -gt 0 || break + # We expect that one of the options parsed in this function matches + # and thus we remove _G_opt from "$@" and need to re-quote. + _G_match_parse_options=: _G_opt=$1 shift case $_G_opt in --debug|-x) debug_cmd='set -x' - func_echo "enabling shell trace mode" + func_echo "enabling shell trace mode" >&2 $debug_cmd ;; @@ -1704,7 +1879,10 @@ ;; --warnings|--warning|-W) - test $# = 0 && func_missing_arg $_G_opt && break + if test $# = 0 && func_missing_arg $_G_opt; then + _G_parse_options_requote=: + break + fi case " $warning_categories $1" in *" $1 "*) # trailing space prevents matching last $1 above @@ -1757,15 +1935,24 @@ shift ;; - --) break ;; + --) _G_parse_options_requote=: ; break ;; -*) func_fatal_help "unrecognised option: '$_G_opt'" ;; - *) set dummy "$_G_opt" ${1+"$@"}; shift; break ;; + *) set dummy "$_G_opt" ${1+"$@"}; shift + _G_match_parse_options=false + break + ;; esac + + if $_G_match_parse_options; then + _G_parse_options_requote=: + fi done - # save modified positional parameters for caller - func_quote_for_eval ${1+"$@"} - func_parse_options_result=$func_quote_for_eval_result + if $_G_parse_options_requote; then + # save modified positional parameters for caller + func_quote eval ${1+"$@"} + func_parse_options_result=$func_quote_result + fi } @@ -1782,12 +1969,10 @@ test -n "$opt_warning_types" || opt_warning_types=" $warning_categories" func_run_hooks func_validate_options ${1+"$@"} + func_propagate_result func_run_hooks func_validate_options # Bail if the options were screwed! $exit_cmd $EXIT_FAILURE - - # save modified positional parameters for caller - func_validate_options_result=$func_run_hooks_result } @@ -1843,8 +2028,8 @@ # func_split_equals STRING # ------------------------ -# Set func_split_equals_lhs and func_split_equals_rhs shell variables after -# splitting STRING at the '=' sign. +# Set func_split_equals_lhs and func_split_equals_rhs shell variables +# after splitting STRING at the '=' sign. test -z "$_G_HAVE_XSI_OPS" \ && (eval 'x=a/b/c; test 5aa/bb/cc = "${#x}${x%%/*}${x%/*}${x#*/}${x##*/}"') 2>/dev/null \ @@ -1859,8 +2044,9 @@ func_split_equals_lhs=${1%%=*} func_split_equals_rhs=${1#*=} - test "x$func_split_equals_lhs" = "x$1" \ - && func_split_equals_rhs= + if test "x$func_split_equals_lhs" = "x$1"; then + func_split_equals_rhs= + fi }' else # ...otherwise fall back to using expr, which is often a shell builtin. @@ -1938,31 +2124,44 @@ # func_version # ------------ # Echo version message to standard output and exit. +# The version message is extracted from the calling file's header +# comments, with leading '# ' stripped: +# 1. First display the progname and version +# 2. Followed by the header comment line matching /^# Written by / +# 3. Then a blank line followed by the first following line matching +# /^# Copyright / +# 4. Immediately followed by any lines between the previous matches, +# except lines preceding the intervening completely blank line. +# For example, see the header comments of this file. func_version () { $debug_cmd printf '%s\n' "$progname $scriptversion" $SED -n ' - /(C)/!b go - :more - /\./!{ - N - s|\n# | | - b more - } - :go - /^# Written by /,/# warranty; / { - s|^# || - s|^# *$|| - s|\((C)\)[ 0-9,-]*[ ,-]\([1-9][0-9]* \)|\1 \2| - p + /^# Written by /!b + s|^# ||; p; n + + :fwd2blnk + /./ { + n + b fwd2blnk } - /^# Written by / { - s|^# || - p + p; n + + :holdwrnt + s|^# || + s|^# *$|| + /^Copyright /!{ + /./H + n + b holdwrnt } - /^warranty; /q' < "$progpath" + + s|\((C)\)[ 0-9,-]*[ ,-]\([1-9][0-9]* \)|\1 \2| + G + s|\(\n\)\n*|\1|g + p; q' < "$progpath" exit $? } @@ -1972,12 +2171,12 @@ # mode: shell-script # sh-indentation: 2 # eval: (add-hook 'before-save-hook 'time-stamp) -# time-stamp-pattern: "10/scriptversion=%:y-%02m-%02d.%02H; # UTC" +# time-stamp-pattern: "30/scriptversion=%:y-%02m-%02d.%02H; # UTC" # time-stamp-time-zone: "UTC" # End: # Set a version string. -scriptversion='(GNU libtool) 2.4.6' +scriptversion='(GNU libtool) 2.4.6.42-b88ce' # func_echo ARG... @@ -2068,12 +2267,12 @@ compiler: $LTCC compiler flags: $LTCFLAGS linker: $LD (gnu? $with_gnu_ld) - version: $progname (GNU libtool) 2.4.6 + version: $progname (GNU libtool) 2.4.6.42-b88ce automake: `($AUTOMAKE --version) 2>/dev/null |$SED 1q` autoconf: `($AUTOCONF --version) 2>/dev/null |$SED 1q` Report bugs to . -GNU libtool home page: . +GNU libtool home page: . General help using GNU software: ." exit 0 } @@ -2124,7 +2323,7 @@ # a configuration failure hint, and exit. func_fatal_configuration () { - func__fatal_error ${1+"$@"} \ + func_fatal_error ${1+"$@"} \ "See the $PACKAGE documentation for more information." \ "Fatal configuration error." } @@ -2270,6 +2469,8 @@ nonopt= preserve_args= + _G_rc_lt_options_prep=: + # Shorthand for --mode=foo, only valid as the first argument case $1 in clean|clea|cle|cl) @@ -2293,11 +2494,16 @@ uninstall|uninstal|uninsta|uninst|unins|unin|uni|un|u) shift; set dummy --mode uninstall ${1+"$@"}; shift ;; + *) + _G_rc_lt_options_prep=false + ;; esac - # Pass back the list of options. - func_quote_for_eval ${1+"$@"} - libtool_options_prep_result=$func_quote_for_eval_result + if $_G_rc_lt_options_prep; then + # Pass back the list of options. + func_quote eval ${1+"$@"} + libtool_options_prep_result=$func_quote_result + fi } func_add_hook func_options_prep libtool_options_prep @@ -2309,9 +2515,12 @@ { $debug_cmd + _G_rc_lt_parse_options=false + # Perform our own loop to consume as many options as possible in # each iteration. while test $# -gt 0; do + _G_match_lt_parse_options=: _G_opt=$1 shift case $_G_opt in @@ -2386,15 +2595,20 @@ func_append preserve_args " $_G_opt" ;; - # An option not handled by this hook function: - *) set dummy "$_G_opt" ${1+"$@"}; shift; break ;; + # An option not handled by this hook function: + *) set dummy "$_G_opt" ${1+"$@"} ; shift + _G_match_lt_parse_options=false + break + ;; esac + $_G_match_lt_parse_options && _G_rc_lt_parse_options=: done - - # save modified positional parameters for caller - func_quote_for_eval ${1+"$@"} - libtool_parse_options_result=$func_quote_for_eval_result + if $_G_rc_lt_parse_options; then + # save modified positional parameters for caller + func_quote eval ${1+"$@"} + libtool_parse_options_result=$func_quote_result + fi } func_add_hook func_parse_options libtool_parse_options @@ -2451,8 +2665,8 @@ } # Pass back the unparsed argument list - func_quote_for_eval ${1+"$@"} - libtool_validate_options_result=$func_quote_for_eval_result + func_quote eval ${1+"$@"} + libtool_validate_options_result=$func_quote_result } func_add_hook func_validate_options libtool_validate_options @@ -3418,8 +3632,8 @@ esac done - func_quote_for_eval "$libobj" - test "X$libobj" != "X$func_quote_for_eval_result" \ + func_quote_arg pretty "$libobj" + test "X$libobj" != "X$func_quote_arg_result" \ && $ECHO "X$libobj" | $GREP '[]~#^*{};<>?"'"'"' &()|`$[]' \ && func_warning "libobj name '$libobj' may not contain shell special characters." func_dirname_and_basename "$obj" "/" "" @@ -3492,8 +3706,8 @@ func_to_tool_file "$srcfile" func_convert_file_msys_to_w32 srcfile=$func_to_tool_file_result - func_quote_for_eval "$srcfile" - qsrcfile=$func_quote_for_eval_result + func_quote_arg pretty "$srcfile" + qsrcfile=$func_quote_arg_result # Only build a PIC object if we are building libtool libraries. if test yes = "$build_libtool_libs"; then @@ -4096,8 +4310,8 @@ case $nonopt in *shtool*) :;; *) false;; esac then # Aesthetically quote it. - func_quote_for_eval "$nonopt" - install_prog="$func_quote_for_eval_result " + func_quote_arg pretty "$nonopt" + install_prog="$func_quote_arg_result " arg=$1 shift else @@ -4107,8 +4321,8 @@ # The real first argument should be the name of the installation program. # Aesthetically quote it. - func_quote_for_eval "$arg" - func_append install_prog "$func_quote_for_eval_result" + func_quote_arg pretty "$arg" + func_append install_prog "$func_quote_arg_result" install_shared_prog=$install_prog case " $install_prog " in *[\\\ /]cp\ *) install_cp=: ;; @@ -4165,12 +4379,12 @@ esac # Aesthetically quote the argument. - func_quote_for_eval "$arg" - func_append install_prog " $func_quote_for_eval_result" + func_quote_arg pretty "$arg" + func_append install_prog " $func_quote_arg_result" if test -n "$arg2"; then - func_quote_for_eval "$arg2" + func_quote_arg pretty "$arg2" fi - func_append install_shared_prog " $func_quote_for_eval_result" + func_append install_shared_prog " $func_quote_arg_result" done test -z "$install_prog" && \ @@ -4181,8 +4395,8 @@ if test -n "$install_override_mode" && $no_mode; then if $install_cp; then :; else - func_quote_for_eval "$install_override_mode" - func_append install_shared_prog " -m $func_quote_for_eval_result" + func_quote_arg pretty "$install_override_mode" + func_append install_shared_prog " -m $func_quote_arg_result" fi fi @@ -4478,8 +4692,8 @@ relink_command=`$ECHO "$relink_command" | $SED 's%@OUTPUT@%'"$outputname"'%g'` $opt_quiet || { - func_quote_for_expand "$relink_command" - eval "func_echo $func_quote_for_expand_result" + func_quote_arg expand,pretty "$relink_command" + eval "func_echo $func_quote_arg_result" } if eval "$relink_command"; then : else @@ -5258,7 +5472,8 @@ if test \"\$libtool_execute_magic\" != \"$magic\"; then file=\"\$0\"" - qECHO=`$ECHO "$ECHO" | $SED "$sed_quote_subst"` + func_quote_arg pretty "$ECHO" + qECHO=$func_quote_arg_result $ECHO "\ # A function that is used when there is no print builtin or printf. @@ -5268,7 +5483,7 @@ \$1 _LTECHO_EOF' } - ECHO=\"$qECHO\" + ECHO=$qECHO fi # Very basic option parsing. These options are (a) specific to @@ -6611,9 +6826,9 @@ while test "$#" -gt 0; do arg=$1 shift - func_quote_for_eval "$arg" - qarg=$func_quote_for_eval_unquoted_result - func_append libtool_args " $func_quote_for_eval_result" + func_quote_arg pretty,unquoted "$arg" + qarg=$func_quote_arg_unquoted_result + func_append libtool_args " $func_quote_arg_result" # If the previous option needs an argument, assign it. if test -n "$prev"; then @@ -7211,9 +7426,9 @@ save_ifs=$IFS; IFS=, for flag in $args; do IFS=$save_ifs - func_quote_for_eval "$flag" - func_append arg " $func_quote_for_eval_result" - func_append compiler_flags " $func_quote_for_eval_result" + func_quote_arg pretty "$flag" + func_append arg " $func_quote_arg_result" + func_append compiler_flags " $func_quote_arg_result" done IFS=$save_ifs func_stripname ' ' '' "$arg" @@ -7227,10 +7442,10 @@ save_ifs=$IFS; IFS=, for flag in $args; do IFS=$save_ifs - func_quote_for_eval "$flag" - func_append arg " $wl$func_quote_for_eval_result" - func_append compiler_flags " $wl$func_quote_for_eval_result" - func_append linker_flags " $func_quote_for_eval_result" + func_quote_arg pretty "$flag" + func_append arg " $wl$func_quote_arg_result" + func_append compiler_flags " $wl$func_quote_arg_result" + func_append linker_flags " $func_quote_arg_result" done IFS=$save_ifs func_stripname ' ' '' "$arg" @@ -7254,8 +7469,8 @@ # -msg_* for osf cc -msg_*) - func_quote_for_eval "$arg" - arg=$func_quote_for_eval_result + func_quote_arg pretty "$arg" + arg=$func_quote_arg_result ;; # Flags to be passed through unchanged, with rationale: @@ -7272,12 +7487,16 @@ # -tp=* Portland pgcc target processor selection # --sysroot=* for sysroot support # -O*, -g*, -flto*, -fwhopr*, -fuse-linker-plugin GCC link-time optimization + # -specs=* GCC specs files # -stdlib=* select c++ std lib with clang + # -fsanitize=* Clang/GCC memory and address sanitizer + # -fuse-ld=* Linker select flags for GCC -64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*| \ -t[45]*|-txscale*|-p|-pg|--coverage|-fprofile-*|-F*|@*|-tp=*|--sysroot=*| \ - -O*|-g*|-flto*|-fwhopr*|-fuse-linker-plugin|-fstack-protector*|-stdlib=*) - func_quote_for_eval "$arg" - arg=$func_quote_for_eval_result + -O*|-g*|-flto*|-fwhopr*|-fuse-linker-plugin|-fstack-protector*|-stdlib=*| \ + -specs=*|-fsanitize=*|-fuse-ld=*) + func_quote_arg pretty "$arg" + arg=$func_quote_arg_result func_append compile_command " $arg" func_append finalize_command " $arg" func_append compiler_flags " $arg" @@ -7298,15 +7517,15 @@ continue else # Otherwise treat like 'Some other compiler flag' below - func_quote_for_eval "$arg" - arg=$func_quote_for_eval_result + func_quote_arg pretty "$arg" + arg=$func_quote_arg_result fi ;; # Some other compiler flag. -* | +*) - func_quote_for_eval "$arg" - arg=$func_quote_for_eval_result + func_quote_arg pretty "$arg" + arg=$func_quote_arg_result ;; *.$objext) @@ -7426,8 +7645,8 @@ *) # Unknown arguments in both finalize_command and compile_command need # to be aesthetically quoted because they are evaled later. - func_quote_for_eval "$arg" - arg=$func_quote_for_eval_result + func_quote_arg pretty "$arg" + arg=$func_quote_arg_result ;; esac # arg @@ -9933,8 +10152,8 @@ for cmd in $concat_cmds; do IFS=$save_ifs $opt_quiet || { - func_quote_for_expand "$cmd" - eval "func_echo $func_quote_for_expand_result" + func_quote_arg expand,pretty "$cmd" + eval "func_echo $func_quote_arg_result" } $opt_dry_run || eval "$cmd" || { lt_exit=$? @@ -10027,8 +10246,8 @@ eval cmd=\"$cmd\" IFS=$save_ifs $opt_quiet || { - func_quote_for_expand "$cmd" - eval "func_echo $func_quote_for_expand_result" + func_quote_arg expand,pretty "$cmd" + eval "func_echo $func_quote_arg_result" } $opt_dry_run || eval "$cmd" || { lt_exit=$? @@ -10502,12 +10721,13 @@ elif eval var_value=\$$var; test -z "$var_value"; then relink_command="$var=; export $var; $relink_command" else - func_quote_for_eval "$var_value" - relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command" + func_quote_arg pretty "$var_value" + relink_command="$var=$func_quote_arg_result; export $var; $relink_command" fi done - relink_command="(cd `pwd`; $relink_command)" - relink_command=`$ECHO "$relink_command" | $SED "$sed_quote_subst"` + func_quote eval cd "`pwd`" + func_quote_arg pretty,unquoted "($func_quote_result; $relink_command)" + relink_command=$func_quote_arg_unquoted_result fi # Only actually do things if not in dry run mode. @@ -10747,13 +10967,15 @@ elif eval var_value=\$$var; test -z "$var_value"; then relink_command="$var=; export $var; $relink_command" else - func_quote_for_eval "$var_value" - relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command" + func_quote_arg pretty,unquoted "$var_value" + relink_command="$var=$func_quote_arg_unquoted_result; export $var; $relink_command" fi done # Quote the link command for shipping. - relink_command="(cd `pwd`; $SHELL \"$progpath\" $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)" - relink_command=`$ECHO "$relink_command" | $SED "$sed_quote_subst"` + func_quote eval cd "`pwd`" + relink_command="($func_quote_result; $SHELL \"$progpath\" $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)" + func_quote_arg pretty,unquoted "$relink_command" + relink_command=$func_quote_arg_unquoted_result if test yes = "$hardcode_automatic"; then relink_command= fi diff -Nru libvdpau-1.1.1/Makefile.in libvdpau-1.2/Makefile.in --- libvdpau-1.1.1/Makefile.in 2015-08-31 21:00:08.000000000 +0000 +++ libvdpau-1.2/Makefile.in 2019-02-28 18:43:03.000000000 +0000 @@ -1,7 +1,7 @@ -# Makefile.in generated by automake 1.15 from Makefile.am. +# Makefile.in generated by automake 1.16.1 from Makefile.am. # @configure_input@ -# Copyright (C) 1994-2014 Free Software Foundation, Inc. +# Copyright (C) 1994-2018 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -165,7 +165,7 @@ $(RECURSIVE_CLEAN_TARGETS) \ $(am__extra_recursive_targets) AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \ - cscope distdir dist dist-all distcheck + cscope distdir distdir-am dist dist-all distcheck am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) \ $(LISP)config.h.in # Read a list of newline-separated strings from the standard input, @@ -190,8 +190,8 @@ DIST_SUBDIRS = $(SUBDIRS) am__DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/config.h.in \ $(srcdir)/vdpau.pc.in AUTHORS COPYING ChangeLog INSTALL NEWS \ - README compile config.guess config.sub install-sh ltmain.sh \ - missing + README compile config.guess config.sub depcomp install-sh \ + ltmain.sh missing DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) distdir = $(PACKAGE)-$(VERSION) top_distdir = $(distdir) @@ -398,8 +398,8 @@ echo ' $(SHELL) ./config.status'; \ $(SHELL) ./config.status;; \ *) \ - echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \ - cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \ + echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__maybe_remake_depfiles)'; \ + cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__maybe_remake_depfiles);; \ esac; $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) @@ -564,7 +564,10 @@ -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags -rm -f cscope.out cscope.in.out cscope.po.out cscope.files -distdir: $(DISTFILES) +distdir: $(BUILT_SOURCES) + $(MAKE) $(AM_MAKEFLAGS) distdir-am + +distdir-am: $(DISTFILES) $(am__remove_distdir) test -d "$(distdir)" || mkdir "$(distdir)" @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ @@ -632,7 +635,7 @@ ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \ || chmod -R a+r "$(distdir)" dist-gzip: distdir - tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz + tardir=$(distdir) && $(am__tar) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).tar.gz $(am__post_remove_distdir) dist-bzip2: distdir tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2 @@ -657,7 +660,7 @@ @echo WARNING: "Support for shar distribution archives is" \ "deprecated." >&2 @echo WARNING: "It will be removed altogether in Automake 2.0" >&2 - shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz + shar $(distdir) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).shar.gz $(am__post_remove_distdir) dist-zip: distdir @@ -675,7 +678,7 @@ distcheck: dist case '$(DIST_ARCHIVES)' in \ *.tar.gz*) \ - GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\ + eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).tar.gz | $(am__untar) ;;\ *.tar.bz2*) \ bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\ *.tar.lz*) \ @@ -685,7 +688,7 @@ *.tar.Z*) \ uncompress -c $(distdir).tar.Z | $(am__untar) ;;\ *.shar.gz*) \ - GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\ + eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).shar.gz | unshar ;;\ *.zip*) \ unzip $(distdir).zip ;;\ esac diff -Nru libvdpau-1.1.1/missing libvdpau-1.2/missing --- libvdpau-1.1.1/missing 2015-08-31 21:00:08.000000000 +0000 +++ libvdpau-1.2/missing 2019-02-28 18:40:58.000000000 +0000 @@ -1,9 +1,9 @@ #! /bin/sh # Common wrapper for a few potentially missing GNU programs. -scriptversion=2013-10-28.13; # UTC +scriptversion=2018-03-07.03; # UTC -# Copyright (C) 1996-2014 Free Software Foundation, Inc. +# Copyright (C) 1996-2018 Free Software Foundation, Inc. # Originally written by Fran,cois Pinard , 1996. # This program is free software; you can redistribute it and/or modify @@ -17,7 +17,7 @@ # GNU General Public License for more details. # You should have received a copy of the GNU General Public License -# along with this program. If not, see . +# along with this program. If not, see . # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a @@ -101,9 +101,9 @@ exit $st fi -perl_URL=http://www.perl.org/ -flex_URL=http://flex.sourceforge.net/ -gnu_software_URL=http://www.gnu.org/software +perl_URL=https://www.perl.org/ +flex_URL=https://github.com/westes/flex +gnu_software_URL=https://www.gnu.org/software program_details () { @@ -207,9 +207,9 @@ exit $st # Local variables: -# eval: (add-hook 'write-file-hooks 'time-stamp) +# eval: (add-hook 'before-save-hook 'time-stamp) # time-stamp-start: "scriptversion=" # time-stamp-format: "%:y-%02m-%02d.%02H" -# time-stamp-time-zone: "UTC" +# time-stamp-time-zone: "UTC0" # time-stamp-end: "; # UTC" # End: diff -Nru libvdpau-1.1.1/src/Makefile.in libvdpau-1.2/src/Makefile.in --- libvdpau-1.1.1/src/Makefile.in 2015-08-31 21:00:08.000000000 +0000 +++ libvdpau-1.2/src/Makefile.in 2019-02-28 18:43:03.000000000 +0000 @@ -1,7 +1,7 @@ -# Makefile.in generated by automake 1.15 from Makefile.am. +# Makefile.in generated by automake 1.16.1 from Makefile.am. # @configure_input@ -# Copyright (C) 1994-2014 Free Software Foundation, Inc. +# Copyright (C) 1994-2018 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -165,7 +165,9 @@ am__v_at_1 = DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir) depcomp = $(SHELL) $(top_srcdir)/depcomp -am__depfiles_maybe = depfiles +am__maybe_remake_depfiles = depfiles +am__depfiles_remade = ./$(DEPDIR)/mesa_dri2.Plo \ + ./$(DEPDIR)/vdpau_wrapper.Plo am__mv = mv -f COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) @@ -399,8 +401,8 @@ *config.status*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ *) \ - echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ - cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ + echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles)'; \ + cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles);; \ esac; $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) @@ -456,8 +458,14 @@ distclean-compile: -rm -f *.tab.c -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mesa_dri2.Plo@am__quote@ -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/vdpau_wrapper.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mesa_dri2.Plo@am__quote@ # am--include-marker +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/vdpau_wrapper.Plo@am__quote@ # am--include-marker + +$(am__depfiles_remade): + @$(MKDIR_P) $(@D) + @echo '# dummy' >$@-t && $(am__mv) $@-t $@ + +am--depfiles: $(am__depfiles_remade) .c.o: @am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< @@ -580,7 +588,10 @@ distclean-tags: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags -distdir: $(DISTFILES) +distdir: $(BUILT_SOURCES) + $(MAKE) $(AM_MAKEFLAGS) distdir-am + +distdir-am: $(DISTFILES) @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ list='$(DISTFILES)'; \ @@ -653,7 +664,8 @@ mostlyclean-am distclean: distclean-am - -rm -rf ./$(DEPDIR) + -rm -f ./$(DEPDIR)/mesa_dri2.Plo + -rm -f ./$(DEPDIR)/vdpau_wrapper.Plo -rm -f Makefile distclean-am: clean-am distclean-compile distclean-generic \ distclean-tags @@ -700,7 +712,8 @@ installcheck-am: maintainer-clean: maintainer-clean-am - -rm -rf ./$(DEPDIR) + -rm -f ./$(DEPDIR)/mesa_dri2.Plo + -rm -f ./$(DEPDIR)/vdpau_wrapper.Plo -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic @@ -722,9 +735,9 @@ .MAKE: install-am install-strip -.PHONY: CTAGS GTAGS TAGS all all-am check check-am clean clean-generic \ - clean-libLTLIBRARIES clean-libtool cscopelist-am ctags \ - ctags-am distclean distclean-compile distclean-generic \ +.PHONY: CTAGS GTAGS TAGS all all-am am--depfiles check check-am clean \ + clean-generic clean-libLTLIBRARIES clean-libtool cscopelist-am \ + ctags ctags-am distclean distclean-compile distclean-generic \ distclean-libtool distclean-tags distdir dvi dvi-am html \ html-am info info-am install install-am install-data \ install-data-am install-dist_libvdpausysconfDATA install-dvi \ diff -Nru libvdpau-1.1.1/src/mesa_dri2.c libvdpau-1.2/src/mesa_dri2.c --- libvdpau-1.1.1/src/mesa_dri2.c 2015-08-31 20:53:02.000000000 +0000 +++ libvdpau-1.2/src/mesa_dri2.c 2018-02-23 20:22:13.000000000 +0000 @@ -33,6 +33,9 @@ * and José Hiram Soltren (jsoltren@nvidia.com) */ +#ifdef HAVE_CONFIG_H +#include "config.h" +#endif #define NEED_REPLIES #include diff -Nru libvdpau-1.1.1/src/util.h libvdpau-1.2/src/util.h --- libvdpau-1.1.1/src/util.h 2015-08-31 20:55:58.000000000 +0000 +++ libvdpau-1.2/src/util.h 2018-02-23 21:45:11.000000000 +0000 @@ -28,7 +28,7 @@ #include #include -static char * getenv_wrapper(const char *name) +static inline char * getenv_wrapper(const char *name) { if (getuid() == geteuid() && getgid() == getegid()) { return getenv(name); diff -Nru libvdpau-1.1.1/test/Makefile.in libvdpau-1.2/test/Makefile.in --- libvdpau-1.1.1/test/Makefile.in 2015-08-31 21:00:08.000000000 +0000 +++ libvdpau-1.2/test/Makefile.in 2019-02-28 18:43:03.000000000 +0000 @@ -1,7 +1,7 @@ -# Makefile.in generated by automake 1.15 from Makefile.am. +# Makefile.in generated by automake 1.16.1 from Makefile.am. # @configure_input@ -# Copyright (C) 1994-2014 Free Software Foundation, Inc. +# Copyright (C) 1994-2018 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -123,7 +123,8 @@ am__v_at_1 = DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir) depcomp = $(SHELL) $(top_srcdir)/depcomp -am__depfiles_maybe = depfiles +am__maybe_remake_depfiles = depfiles +am__depfiles_remade = ./$(DEPDIR)/dlclose.Po am__mv = mv -f COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) @@ -536,8 +537,8 @@ *config.status*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ *) \ - echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ - cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ + echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles)'; \ + cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles);; \ esac; $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) @@ -568,7 +569,13 @@ distclean-compile: -rm -f *.tab.c -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/dlclose.Po@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/dlclose.Po@am__quote@ # am--include-marker + +$(am__depfiles_remade): + @$(MKDIR_P) $(@D) + @echo '# dummy' >$@-t && $(am__mv) $@-t $@ + +am--depfiles: $(am__depfiles_remade) .c.o: @am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< @@ -769,7 +776,7 @@ fi; \ $$success || exit 1 -check-TESTS: +check-TESTS: $(check_PROGRAMS) @list='$(RECHECK_LOGS)'; test -z "$$list" || rm -f $$list @list='$(RECHECK_LOGS:.log=.trs)'; test -z "$$list" || rm -f $$list @test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG) @@ -812,7 +819,10 @@ @am__EXEEXT_TRUE@ $(am__common_driver_flags) $(AM_TEST_LOG_DRIVER_FLAGS) $(TEST_LOG_DRIVER_FLAGS) -- $(TEST_LOG_COMPILE) \ @am__EXEEXT_TRUE@ "$$tst" $(AM_TESTS_FD_REDIRECT) -distdir: $(DISTFILES) +distdir: $(BUILT_SOURCES) + $(MAKE) $(AM_MAKEFLAGS) distdir-am + +distdir-am: $(DISTFILES) @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ list='$(DISTFILES)'; \ @@ -887,7 +897,7 @@ mostlyclean-am distclean: distclean-am - -rm -rf ./$(DEPDIR) + -rm -f ./$(DEPDIR)/dlclose.Po -rm -f Makefile distclean-am: clean-am distclean-compile distclean-generic \ distclean-tags @@ -933,7 +943,7 @@ installcheck-am: maintainer-clean: maintainer-clean-am - -rm -rf ./$(DEPDIR) + -rm -f ./$(DEPDIR)/dlclose.Po -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic @@ -954,16 +964,16 @@ .MAKE: check-am install-am install-strip -.PHONY: CTAGS GTAGS TAGS all all-am check check-TESTS check-am clean \ - clean-checkPROGRAMS clean-generic clean-libtool cscopelist-am \ - ctags ctags-am distclean distclean-compile distclean-generic \ - distclean-libtool distclean-tags distdir dvi dvi-am html \ - html-am info info-am install install-am install-data \ - install-data-am install-dvi install-dvi-am install-exec \ - install-exec-am install-html install-html-am install-info \ - install-info-am install-man install-pdf install-pdf-am \ - install-ps install-ps-am install-strip installcheck \ - installcheck-am installdirs maintainer-clean \ +.PHONY: CTAGS GTAGS TAGS all all-am am--depfiles check check-TESTS \ + check-am clean clean-checkPROGRAMS clean-generic clean-libtool \ + cscopelist-am ctags ctags-am distclean distclean-compile \ + distclean-generic distclean-libtool distclean-tags distdir dvi \ + dvi-am html html-am info info-am install install-am \ + install-data install-data-am install-dvi install-dvi-am \ + install-exec install-exec-am install-html install-html-am \ + install-info install-info-am install-man install-pdf \ + install-pdf-am install-ps install-ps-am install-strip \ + installcheck installcheck-am installdirs maintainer-clean \ maintainer-clean-generic mostlyclean mostlyclean-compile \ mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ recheck tags tags-am uninstall uninstall-am diff -Nru libvdpau-1.1.1/test-driver libvdpau-1.2/test-driver --- libvdpau-1.1.1/test-driver 2015-08-31 21:00:08.000000000 +0000 +++ libvdpau-1.2/test-driver 2019-02-28 18:40:58.000000000 +0000 @@ -1,9 +1,9 @@ #! /bin/sh # test-driver - basic testsuite driver script. -scriptversion=2013-07-13.22; # UTC +scriptversion=2018-03-07.03; # UTC -# Copyright (C) 2011-2014 Free Software Foundation, Inc. +# Copyright (C) 2011-2018 Free Software Foundation, Inc. # # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by @@ -16,7 +16,7 @@ # GNU General Public License for more details. # # You should have received a copy of the GNU General Public License -# along with this program. If not, see . +# along with this program. If not, see . # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a @@ -140,9 +140,9 @@ # Local Variables: # mode: shell-script # sh-indentation: 2 -# eval: (add-hook 'write-file-hooks 'time-stamp) +# eval: (add-hook 'before-save-hook 'time-stamp) # time-stamp-start: "scriptversion=" # time-stamp-format: "%:y-%02m-%02d.%02H" -# time-stamp-time-zone: "UTC" +# time-stamp-time-zone: "UTC0" # time-stamp-end: "; # UTC" # End: diff -Nru libvdpau-1.1.1/trace/Makefile.in libvdpau-1.2/trace/Makefile.in --- libvdpau-1.1.1/trace/Makefile.in 2015-08-31 21:00:08.000000000 +0000 +++ libvdpau-1.2/trace/Makefile.in 2019-02-28 18:43:03.000000000 +0000 @@ -1,7 +1,7 @@ -# Makefile.in generated by automake 1.15 from Makefile.am. +# Makefile.in generated by automake 1.16.1 from Makefile.am. # @configure_input@ -# Copyright (C) 1994-2014 Free Software Foundation, Inc. +# Copyright (C) 1994-2018 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -157,7 +157,8 @@ am__v_at_1 = DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir) depcomp = $(SHELL) $(top_srcdir)/depcomp -am__depfiles_maybe = depfiles +am__maybe_remake_depfiles = depfiles +am__depfiles_remade = ./$(DEPDIR)/vdpau_trace.Plo am__mv = mv -f CXXCOMPILE = $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \ $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) @@ -380,8 +381,8 @@ *config.status*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ *) \ - echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ - cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ + echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles)'; \ + cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles);; \ esac; $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) @@ -437,7 +438,13 @@ distclean-compile: -rm -f *.tab.c -@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/vdpau_trace.Plo@am__quote@ +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/vdpau_trace.Plo@am__quote@ # am--include-marker + +$(am__depfiles_remade): + @$(MKDIR_P) $(@D) + @echo '# dummy' >$@-t && $(am__mv) $@-t $@ + +am--depfiles: $(am__depfiles_remade) .cpp.o: @am__fastdepCXX_TRUE@ $(AM_V_CXX)$(CXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< @@ -539,7 +546,10 @@ distclean-tags: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags -distdir: $(DISTFILES) +distdir: $(BUILT_SOURCES) + $(MAKE) $(AM_MAKEFLAGS) distdir-am + +distdir-am: $(DISTFILES) @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ list='$(DISTFILES)'; \ @@ -612,7 +622,7 @@ mostlyclean-am distclean: distclean-am - -rm -rf ./$(DEPDIR) + -rm -f ./$(DEPDIR)/vdpau_trace.Plo -rm -f Makefile distclean-am: clean-am distclean-compile distclean-generic \ distclean-tags @@ -659,7 +669,7 @@ installcheck-am: maintainer-clean: maintainer-clean-am - -rm -rf ./$(DEPDIR) + -rm -f ./$(DEPDIR)/vdpau_trace.Plo -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic @@ -681,17 +691,18 @@ .MAKE: install-am install-strip -.PHONY: CTAGS GTAGS TAGS all all-am check check-am clean clean-generic \ - clean-libtool clean-moduleLTLIBRARIES cscopelist-am ctags \ - ctags-am distclean distclean-compile distclean-generic \ - distclean-libtool distclean-tags distdir dvi dvi-am html \ - html-am info info-am install install-am install-data \ - install-data-am install-dvi install-dvi-am install-exec \ - install-exec-am install-html install-html-am install-info \ - install-info-am install-libvdpau_traceincludeHEADERS \ - install-man install-moduleLTLIBRARIES install-pdf \ - install-pdf-am install-ps install-ps-am install-strip \ - installcheck installcheck-am installdirs maintainer-clean \ +.PHONY: CTAGS GTAGS TAGS all all-am am--depfiles check check-am clean \ + clean-generic clean-libtool clean-moduleLTLIBRARIES \ + cscopelist-am ctags ctags-am distclean distclean-compile \ + distclean-generic distclean-libtool distclean-tags distdir dvi \ + dvi-am html html-am info info-am install install-am \ + install-data install-data-am install-dvi install-dvi-am \ + install-exec install-exec-am install-html install-html-am \ + install-info install-info-am \ + install-libvdpau_traceincludeHEADERS install-man \ + install-moduleLTLIBRARIES install-pdf install-pdf-am \ + install-ps install-ps-am install-strip installcheck \ + installcheck-am installdirs maintainer-clean \ maintainer-clean-generic mostlyclean mostlyclean-compile \ mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ tags tags-am uninstall uninstall-am \