diff -Nru uriparser-0.6.0/aclocal.m4 uriparser-0.7.4/aclocal.m4
--- uriparser-0.6.0/aclocal.m4	2007-09-19 04:12:42.000000000 +0100
+++ uriparser-0.7.4/aclocal.m4	2008-12-23 02:31:16.000000000 +0000
@@ -1,7 +1,7 @@
-# generated automatically by aclocal 1.10 -*- Autoconf -*-
+# generated automatically by aclocal 1.10.1 -*- Autoconf -*-
 
 # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
-# 2005, 2006  Free Software Foundation, Inc.
+# 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -11,14 +11,17 @@
 # even the implied warranty of MERCHANTABILITY or FITNESS FOR A
 # PARTICULAR PURPOSE.
 
-m4_if(m4_PACKAGE_VERSION, [2.61],,
-[m4_fatal([this file was generated for autoconf 2.61.
-You have another version of autoconf.  If you want to use that,
-you should regenerate the build system entirely.], [63])])
+m4_ifndef([AC_AUTOCONF_VERSION],
+  [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
+m4_if(AC_AUTOCONF_VERSION, [2.61],,
+[m4_warning([this file was generated for autoconf 2.61.
+You have another version of autoconf.  It may work, but is not guaranteed to.
+If you have problems, you may need to regenerate the build system entirely.
+To do so, use the procedure documented by the package, typically `autoreconf'.])])
 
 # libtool.m4 - Configure libtool for the host system. -*-Autoconf-*-
 
-# serial 50 AC_PROG_LIBTOOL
+# serial 52 AC_PROG_LIBTOOL
 
 
 # AC_PROVIDE_IFELSE(MACRO-NAME, IF-PROVIDED, IF-NOT-PROVIDED)
@@ -106,7 +109,6 @@
 AC_REQUIRE([AC_OBJEXT])dnl
 AC_REQUIRE([AC_EXEEXT])dnl
 dnl
-
 AC_LIBTOOL_SYS_MAX_CMD_LEN
 AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE
 AC_LIBTOOL_OBJDIR
@@ -181,7 +183,7 @@
 test -z "$ac_objext" && ac_objext=o
 
 # Determine commands to create old-style static archives.
-old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs$old_deplibs'
+old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs'
 old_postinstall_cmds='chmod 644 $oldlib'
 old_postuninstall_cmds=
 
@@ -208,6 +210,8 @@
   ;;
 esac
 
+_LT_REQUIRED_DARWIN_CHECKS
+
 AC_PROVIDE_IFELSE([AC_LIBTOOL_DLOPEN], enable_dlopen=yes, enable_dlopen=no)
 AC_PROVIDE_IFELSE([AC_LIBTOOL_WIN32_DLL],
 enable_win32_dll=yes, enable_win32_dll=no)
@@ -224,6 +228,14 @@
     [pic_mode=default])
 test -z "$pic_mode" && pic_mode=default
 
+# Check if we have a version mismatch between libtool.m4 and ltmain.sh.
+#
+# Note:  This should be in AC_LIBTOOL_SETUP, _after_ $ltmain have been defined.
+#        We also should do it _before_ AC_LIBTOOL_LANG_C_CONFIG that actually
+#        calls AC_LIBTOOL_CONFIG and creates libtool.
+#
+_LT_VERSION_CHECK
+
 # Use C for the default configuration in the libtool script
 tagname=
 AC_LIBTOOL_LANG_C_CONFIG
@@ -231,6 +243,41 @@
 ])# AC_LIBTOOL_SETUP
 
 
+# _LT_VERSION_CHECK
+# -----------------
+AC_DEFUN([_LT_VERSION_CHECK],
+[AC_MSG_CHECKING([for correct ltmain.sh version])
+if test "x$ltmain" = "x" ; then
+  AC_MSG_RESULT(no)
+  AC_MSG_ERROR([
+
+*** @<:@Gentoo@:>@ sanity check failed! ***
+*** \$ltmain is not defined, please check the patch for consistency! ***
+])
+fi
+gentoo_lt_version="1.5.26"
+gentoo_ltmain_version=`sed -n '/^[[ 	]]*VERSION=/{s/^[[ 	]]*VERSION=//;p;q;}' "$ltmain"`
+if test "x$gentoo_lt_version" != "x$gentoo_ltmain_version" ; then
+  AC_MSG_RESULT(no)
+  AC_MSG_ERROR([
+
+*** @<:@Gentoo@:>@ sanity check failed! ***
+*** libtool.m4 and ltmain.sh have a version mismatch! ***
+*** (libtool.m4 = $gentoo_lt_version, ltmain.sh = $gentoo_ltmain_version) ***
+
+Please run:
+
+  libtoolize --copy --force
+
+if appropriate, please contact the maintainer of this
+package (or your distribution) for help.
+])
+else
+  AC_MSG_RESULT(yes)
+fi
+])# _LT_VERSION_CHECK
+
+
 # _LT_AC_SYS_COMPILER
 # -------------------
 AC_DEFUN([_LT_AC_SYS_COMPILER],
@@ -287,9 +334,80 @@
 echo "$lt_simple_link_test_code" >conftest.$ac_ext
 eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
 _lt_linker_boilerplate=`cat conftest.err`
-$rm conftest*
+$rm -r conftest*
 ])# _LT_LINKER_BOILERPLATE
 
+# _LT_REQUIRED_DARWIN_CHECKS
+# --------------------------
+# Check for some things on darwin
+AC_DEFUN([_LT_REQUIRED_DARWIN_CHECKS],[
+  case $host_os in
+    rhapsody* | darwin*)
+    AC_CHECK_TOOL([DSYMUTIL], [dsymutil], [:])
+    AC_CHECK_TOOL([NMEDIT], [nmedit], [:])
+
+    AC_CACHE_CHECK([for -single_module linker flag],[lt_cv_apple_cc_single_mod],
+      [lt_cv_apple_cc_single_mod=no
+      if test -z "${LT_MULTI_MODULE}"; then
+   # By default we will add the -single_module flag. You can override
+   # by either setting the environment variable LT_MULTI_MODULE
+   # non-empty at configure time, or by adding -multi_module to the
+   # link flags.
+   echo "int foo(void){return 1;}" > conftest.c
+   $LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
+     -dynamiclib ${wl}-single_module conftest.c
+   if test -f libconftest.dylib; then
+     lt_cv_apple_cc_single_mod=yes
+     rm -rf libconftest.dylib*
+   fi
+   rm conftest.c
+      fi])
+    AC_CACHE_CHECK([for -exported_symbols_list linker flag],
+      [lt_cv_ld_exported_symbols_list],
+      [lt_cv_ld_exported_symbols_list=no
+      save_LDFLAGS=$LDFLAGS
+      echo "_main" > conftest.sym
+      LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym"
+      AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])],
+   [lt_cv_ld_exported_symbols_list=yes],
+   [lt_cv_ld_exported_symbols_list=no])
+   LDFLAGS="$save_LDFLAGS"
+    ])
+    case $host_os in
+    rhapsody* | darwin1.[[0123]])
+      _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;;
+    darwin1.*)
+     _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
+    darwin*)
+      # if running on 10.5 or later, the deployment target defaults
+      # to the OS version, if on x86, and 10.4, the deployment
+      # target defaults to 10.4. Don't you love it?
+      case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in
+   10.0,*86*-darwin8*|10.0,*-darwin[[91]]*)
+     _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
+   10.[[012]]*)
+     _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
+   10.*)
+     _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
+      esac
+    ;;
+  esac
+    if test "$lt_cv_apple_cc_single_mod" = "yes"; then
+      _lt_dar_single_mod='$single_module'
+    fi
+    if test "$lt_cv_ld_exported_symbols_list" = "yes"; then
+      _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym'
+    else
+      _lt_dar_export_syms="~$NMEDIT -s \$output_objdir/\${libname}-symbols.expsym \${lib}"
+    fi
+    if test "$DSYMUTIL" != ":"; then
+      _lt_dsymutil="~$DSYMUTIL \$lib || :"
+    else
+      _lt_dsymutil=
+    fi
+    ;;
+  esac
+])
 
 # _LT_AC_SYS_LIBPATH_AIX
 # ----------------------
@@ -614,7 +732,11 @@
     *64-bit*)
       case $lt_cv_prog_gnu_ld in
       yes*) LD="${LD-ld} -m elf64_sparc" ;;
-      *)    LD="${LD-ld} -64" ;;
+      *)
+        if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then
+	  LD="${LD-ld} -64"
+	fi
+	;;
       esac
       ;;
     esac
@@ -707,7 +829,7 @@
        $2=yes
      fi
    fi
-   $rm conftest*
+   $rm -r conftest*
    LDFLAGS="$save_LDFLAGS"
 ])
 
@@ -805,24 +927,27 @@
     fi
     ;;
   *)
-    # If test is not a shell built-in, we'll probably end up computing a
-    # maximum length that is only half of the actual maximum length, but
-    # we can't tell.
-    SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}}
-    while (test "X"`$SHELL [$]0 --fallback-echo "X$teststring" 2>/dev/null` \
+    lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null`
+    if test -n "$lt_cv_sys_max_cmd_len"; then
+      lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
+      lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
+    else
+      SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}}
+      while (test "X"`$SHELL [$]0 --fallback-echo "X$teststring" 2>/dev/null` \
 	       = "XX$teststring") >/dev/null 2>&1 &&
-	    new_result=`expr "X$teststring" : ".*" 2>&1` &&
-	    lt_cv_sys_max_cmd_len=$new_result &&
-	    test $i != 17 # 1/2 MB should be enough
-    do
-      i=`expr $i + 1`
-      teststring=$teststring$teststring
-    done
-    teststring=
-    # Add a significant safety factor because C++ compilers can tack on massive
-    # amounts of additional arguments before passing them to the linker.
-    # It appears as though 1/2 is a usable value.
-    lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2`
+	      new_result=`expr "X$teststring" : ".*" 2>&1` &&
+	      lt_cv_sys_max_cmd_len=$new_result &&
+	      test $i != 17 # 1/2 MB should be enough
+      do
+        i=`expr $i + 1`
+        teststring=$teststring$teststring
+      done
+      teststring=
+      # Add a significant safety factor because C++ compilers can tack on massive
+      # amounts of additional arguments before passing them to the linker.
+      # It appears as though 1/2 is a usable value.
+      lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2`
+    fi
     ;;
   esac
 ])
@@ -975,7 +1100,7 @@
     AC_CHECK_FUNC([shl_load],
 	  [lt_cv_dlopen="shl_load"],
       [AC_CHECK_LIB([dld], [shl_load],
-	    [lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-dld"],
+	    [lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld"],
 	[AC_CHECK_FUNC([dlopen],
 	      [lt_cv_dlopen="dlopen"],
 	  [AC_CHECK_LIB([dl], [dlopen],
@@ -983,7 +1108,7 @@
 	    [AC_CHECK_LIB([svld], [dlopen],
 		  [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"],
 	      [AC_CHECK_LIB([dld], [dld_link],
-		    [lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-dld"])
+		    [lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld"])
 	      ])
 	    ])
 	  ])
@@ -1300,7 +1425,7 @@
   soname_spec='${libname}${release}${shared_ext}$major'
   ;;
 
-aix4* | aix5*)
+aix[[4-9]]*)
   version_type=linux
   need_lib_prefix=no
   need_version=no
@@ -1468,7 +1593,14 @@
     *) objformat=elf ;;
     esac
   fi
-  version_type=freebsd-$objformat
+  # Handle Gentoo/FreeBSD as it was Linux
+  case $host_vendor in
+    gentoo)
+      version_type=linux ;;
+    *)
+      version_type=freebsd-$objformat ;;
+  esac
+
   case $version_type in
     freebsd-elf*)
       library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
@@ -1479,6 +1611,12 @@
       library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
       need_version=yes
       ;;
+    linux)
+      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+      soname_spec='${libname}${release}${shared_ext}$major'
+      need_lib_prefix=no
+      need_version=no
+      ;;
   esac
   shlibpath_var=LD_LIBRARY_PATH
   case $host_os in
@@ -1557,7 +1695,7 @@
   postinstall_cmds='chmod 555 $lib'
   ;;
 
-interix3*)
+interix[[3-9]]*)
   version_type=linux
   need_lib_prefix=no
   need_version=no
@@ -1628,7 +1766,7 @@
 
   # Append ld.so.conf contents to the search path
   if test -f /etc/ld.so.conf; then
-    lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;s/[:,	]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
+    lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ 	]*hwcap[ 	]/d;s/[:,	]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
     sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
   fi
 
@@ -1821,6 +1959,13 @@
 AC_MSG_RESULT([$dynamic_linker])
 test "$dynamic_linker" = no && can_build_shared=no
 
+AC_CACHE_VAL([lt_cv_sys_lib_search_path_spec],
+[lt_cv_sys_lib_search_path_spec="$sys_lib_search_path_spec"])
+sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec"
+AC_CACHE_VAL([lt_cv_sys_lib_dlsearch_path_spec],
+[lt_cv_sys_lib_dlsearch_path_spec="$sys_lib_dlsearch_path_spec"])
+sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec"
+
 variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
 if test "$GCC" = yes; then
   variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
@@ -2320,7 +2465,7 @@
 # whether `pass_all' will *always* work, you probably want this one.
 
 case $host_os in
-aix4* | aix5*)
+aix[[4-9]]*)
   lt_cv_deplibs_check_method=pass_all
   ;;
 
@@ -2395,7 +2540,7 @@
   esac
   ;;
 
-interix3*)
+interix[[3-9]]*)
   # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here
   lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|\.a)$'
   ;;
@@ -2756,7 +2901,7 @@
   fi
   ;;
 
-aix4* | aix5*)
+aix[[4-9]]*)
   if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
     test "$enable_shared" = yes && enable_static=no
   fi
@@ -2813,6 +2958,7 @@
 _LT_AC_TAGVAR(predeps, $1)=
 _LT_AC_TAGVAR(postdeps, $1)=
 _LT_AC_TAGVAR(compiler_lib_search_path, $1)=
+_LT_AC_TAGVAR(compiler_lib_search_dirs, $1)=
 
 # Source file extension for C++ test sources.
 ac_ext=cpp
@@ -2922,7 +3068,7 @@
     # FIXME: insert proper C++ library support
     _LT_AC_TAGVAR(ld_shlibs, $1)=no
     ;;
-  aix4* | aix5*)
+  aix[[4-9]]*)
     if test "$host_cpu" = ia64; then
       # On IA64, the linker does run time linking by default, so we don't
       # have to do anything special.
@@ -2935,7 +3081,7 @@
       # Test if we are trying to use run time linking or normal
       # AIX style linking. If -brtl is somewhere in LDFLAGS, we
       # need to do runtime linking.
-      case $host_os in aix4.[[23]]|aix4.[[23]].*|aix5*)
+      case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*)
 	for ld_flag in $LDFLAGS; do
 	  case $ld_flag in
 	  *-brtl*)
@@ -3081,59 +3227,31 @@
     fi
   ;;
       darwin* | rhapsody*)
-        case $host_os in
-        rhapsody* | darwin1.[[012]])
-         _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-undefined ${wl}suppress'
-         ;;
-       *) # Darwin 1.3 on
-         if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then
-           _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
-         else
-           case ${MACOSX_DEPLOYMENT_TARGET} in
-             10.[[012]])
-               _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
-               ;;
-             10.*)
-               _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-undefined ${wl}dynamic_lookup'
-               ;;
-           esac
-         fi
-         ;;
-        esac
       _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
       _LT_AC_TAGVAR(hardcode_direct, $1)=no
       _LT_AC_TAGVAR(hardcode_automatic, $1)=yes
       _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
       _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=''
       _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
-
-    if test "$GXX" = yes ; then
-      lt_int_apple_cc_single_mod=no
+      _LT_AC_TAGVAR(allow_undefined_flag, $1)="$_lt_dar_allow_undefined"
+      if test "$GXX" = yes ; then
       output_verbose_link_cmd='echo'
-      if $CC -dumpspecs 2>&1 | $EGREP 'single_module' >/dev/null ; then
-       lt_int_apple_cc_single_mod=yes
+      _LT_AC_TAGVAR(archive_cmds, $1)="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}"
+      _LT_AC_TAGVAR(module_cmds, $1)="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}"
+      _LT_AC_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}"
+      _LT_AC_TAGVAR(module_expsym_cmds, $1)="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}"
+      if test "$lt_cv_apple_cc_single_mod" != "yes"; then
+        _LT_AC_TAGVAR(archive_cmds, $1)="\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dsymutil}"
+        _LT_AC_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dar_export_syms}${_lt_dsymutil}"
       fi
-      if test "X$lt_int_apple_cc_single_mod" = Xyes ; then
-       _LT_AC_TAGVAR(archive_cmds, $1)='$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
-      else
-          _LT_AC_TAGVAR(archive_cmds, $1)='$CC -r -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
-        fi
-        _LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
-        # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
-          if test "X$lt_int_apple_cc_single_mod" = Xyes ; then
-            _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-          else
-            _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -r -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-          fi
-            _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag  -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
       else
       case $cc_basename in
         xlc*)
          output_verbose_link_cmd='echo'
-          _LT_AC_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj ${wl}-single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $verstring'
+          _LT_AC_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj ${wl}-single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $xlcverstring'
           _LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
           # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
-          _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj ${wl}-single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+          _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj ${wl}-single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $xlcverstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
           _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag  -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
           ;;
        *)
@@ -3284,7 +3402,7 @@
 	;;
     esac
     ;;
-  interix3*)
+  interix[[3-9]]*)
     _LT_AC_TAGVAR(hardcode_direct, $1)=no
     _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
     _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
@@ -3376,7 +3494,7 @@
 	_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
 	_LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
 	;;
-      pgCC*)
+      pgCC* | pgcpp*)
         # Portland Group C++ compiler
 	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
   	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
@@ -3465,16 +3583,20 @@
     _LT_AC_TAGVAR(ld_shlibs, $1)=no
     ;;
   openbsd*)
-    _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-    _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-    _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
-    _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-    if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-      _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib'
-      _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
-      _LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+    if test -f /usr/libexec/ld.so; then
+      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
+      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+      _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
+      _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+      if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib'
+	_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+	_LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+      fi
+      output_verbose_link_cmd='echo'
+    else
+      _LT_AC_TAGVAR(ld_shlibs, $1)=no
     fi
-    output_verbose_link_cmd='echo'
     ;;
   osf3*)
     case $cc_basename in
@@ -3807,7 +3929,8 @@
 # compiler output when linking a shared library.
 # Parse the compiler output and extract the necessary
 # objects, libraries and library flags.
-AC_DEFUN([AC_LIBTOOL_POSTDEP_PREDEP],[
+AC_DEFUN([AC_LIBTOOL_POSTDEP_PREDEP],
+[AC_REQUIRE([LT_AC_PROG_SED])dnl
 dnl we can't use the lt_simple_compile_test_code here,
 dnl because it contains code intended for an executable,
 dnl not a library.  It's possible we should let each
@@ -3932,10 +4055,15 @@
 
 $rm -f confest.$objext
 
+_LT_AC_TAGVAR(compiler_lib_search_dirs, $1)=
+if test -n "$_LT_AC_TAGVAR(compiler_lib_search_path, $1)"; then
+  _LT_AC_TAGVAR(compiler_lib_search_dirs, $1)=`echo " ${_LT_AC_TAGVAR(compiler_lib_search_path, $1)}" | ${SED} -e 's! -L! !g' -e 's!^ !!'`
+fi
+
 # PORTME: override above test on systems where it is broken
 ifelse([$1],[CXX],
 [case $host_os in
-interix3*)
+interix[[3-9]]*)
   # Interix 3.5 installs completely hosed .la files for C++, so rather than
   # hack all around it, let's just trust "g++" to DTRT.
   _LT_AC_TAGVAR(predep_objects,$1)=
@@ -3988,7 +4116,6 @@
   ;;
 esac
 ])
-
 case " $_LT_AC_TAGVAR(postdeps, $1) " in
 *" -lc "*) _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no ;;
 esac
@@ -4073,7 +4200,7 @@
     postinstall_cmds='$RANLIB $lib'
   fi
   ;;
-aix4* | aix5*)
+aix[[4-9]]*)
   if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
     test "$enable_shared" = yes && enable_static=no
   fi
@@ -4250,6 +4377,7 @@
     _LT_AC_TAGVAR(predeps, $1) \
     _LT_AC_TAGVAR(postdeps, $1) \
     _LT_AC_TAGVAR(compiler_lib_search_path, $1) \
+    _LT_AC_TAGVAR(compiler_lib_search_dirs, $1) \
     _LT_AC_TAGVAR(archive_cmds, $1) \
     _LT_AC_TAGVAR(archive_expsym_cmds, $1) \
     _LT_AC_TAGVAR(postinstall_cmds, $1) \
@@ -4265,6 +4393,7 @@
     _LT_AC_TAGVAR(module_cmds, $1) \
     _LT_AC_TAGVAR(module_expsym_cmds, $1) \
     _LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1) \
+    _LT_AC_TAGVAR(fix_srcfile_path, $1) \
     _LT_AC_TAGVAR(exclude_expsyms, $1) \
     _LT_AC_TAGVAR(include_expsyms, $1); do
 
@@ -4311,7 +4440,7 @@
 # Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP)
 # NOTE: Changes made to this file will be lost: look at ltmain.sh.
 #
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008
 # Free Software Foundation, Inc.
 #
 # This file is part of GNU Libtool:
@@ -4548,6 +4677,10 @@
 # shared library.
 postdeps=$lt_[]_LT_AC_TAGVAR(postdeps, $1)
 
+# The directories searched by this compiler when creating a shared
+# library
+compiler_lib_search_dirs=$lt_[]_LT_AC_TAGVAR(compiler_lib_search_dirs, $1)
+
 # The library search path used internally by the compiler when linking
 # a shared library.
 compiler_lib_search_path=$lt_[]_LT_AC_TAGVAR(compiler_lib_search_path, $1)
@@ -4636,7 +4769,7 @@
 sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
 
 # Fix the shell variable \$srcfile for the compiler.
-fix_srcfile_path="$_LT_AC_TAGVAR(fix_srcfile_path, $1)"
+fix_srcfile_path=$lt_fix_srcfile_path
 
 # Set to yes if exported symbols are required.
 always_export_symbols=$_LT_AC_TAGVAR(always_export_symbols, $1)
@@ -4897,7 +5030,7 @@
     echo "$progname: failed program was:" >&AS_MESSAGE_LOG_FD
     cat conftest.$ac_ext >&5
   fi
-  rm -f conftest* conftst*
+  rm -rf conftest* conftst*
 
   # Do not use the global_symbol_pipe unless it works.
   if test "$pipe_works" = yes; then
@@ -4954,7 +5087,8 @@
       # built for inclusion in a dll (and should export symbols for example).
       # Although the cygwin gcc ignores -fPIC, still need this for old-style
       # (--disable-auto-import) libraries
-      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'
+      m4_if([$1], [GCJ], [],
+	[_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
       ;;
     darwin* | rhapsody*)
       # PIC is the default on this platform
@@ -4965,7 +5099,7 @@
       # DJGPP does not support shared libraries at all
       _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
       ;;
-    interix3*)
+    interix[[3-9]]*)
       # Interix 3.x gcc -fpic/-fPIC options generate broken code.
       # Instead, we relocate shared libraries at runtime.
       ;;
@@ -4991,7 +5125,7 @@
     esac
   else
     case $host_os in
-      aix4* | aix5*)
+      aix[[4-9]]*)
 	# All AIX code is PIC.
 	if test "$host_cpu" = ia64; then
 	  # AIX 5 now supports IA64 processor
@@ -5087,7 +5221,7 @@
 	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
 	    _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static'
 	    ;;
-	  pgCC*)
+	  pgCC* | pgcpp*)
 	    # Portland Group C++ compiler.
 	    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
 	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fpic'
@@ -5238,7 +5372,8 @@
       # built for inclusion in a dll (and should export symbols for example).
       # Although the cygwin gcc ignores -fPIC, still need this for old-style
       # (--disable-auto-import) libraries
-      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'
+      m4_if([$1], [GCJ], [],
+	[_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
       ;;
 
     darwin* | rhapsody*)
@@ -5247,7 +5382,7 @@
       _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'
       ;;
 
-    interix3*)
+    interix[[3-9]]*)
       # Interix 3.x gcc -fpic/-fPIC options generate broken code.
       # Instead, we relocate shared libraries at runtime.
       ;;
@@ -5308,7 +5443,8 @@
     mingw* | cygwin* | pw32* | os2*)
       # This hack is so that the source file can tell whether it is being
       # built for inclusion in a dll (and should export symbols for example).
-      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'
+      m4_if([$1], [GCJ], [],
+	[_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
       ;;
 
     hpux9* | hpux10* | hpux11*)
@@ -5445,7 +5581,7 @@
 #
 if test -n "$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)"; then
   AC_LIBTOOL_COMPILER_OPTION([if $compiler PIC flag $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) works],
-    _LT_AC_TAGVAR(lt_prog_compiler_pic_works, $1),
+    _LT_AC_TAGVAR(lt_cv_prog_compiler_pic_works, $1),
     [$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)ifelse([$1],[],[ -DPIC],[ifelse([$1],[CXX],[ -DPIC],[])])], [],
     [case $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) in
      "" | " "*) ;;
@@ -5469,7 +5605,7 @@
 #
 wl=$_LT_AC_TAGVAR(lt_prog_compiler_wl, $1) eval lt_tmp_static_flag=\"$_LT_AC_TAGVAR(lt_prog_compiler_static, $1)\"
 AC_LIBTOOL_LINKER_OPTION([if $compiler static flag $lt_tmp_static_flag works],
-  _LT_AC_TAGVAR(lt_prog_compiler_static_works, $1),
+  _LT_AC_TAGVAR(lt_cv_prog_compiler_static_works, $1),
   $lt_tmp_static_flag,
   [],
   [_LT_AC_TAGVAR(lt_prog_compiler_static, $1)=])
@@ -5485,7 +5621,7 @@
 ifelse([$1],[CXX],[
   _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
   case $host_os in
-  aix4* | aix5*)
+  aix[[4-9]]*)
     # If we're using GNU nm, then we don't want the "-C" option.
     # -C means demangle to AIX nm, but means don't demangle with GNU nm
     if $NM -V 2>&1 | grep 'GNU' > /dev/null; then
@@ -5504,6 +5640,7 @@
     _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
   ;;
   esac
+  _LT_AC_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*']
 ],[
   runpath_var=
   _LT_AC_TAGVAR(allow_undefined_flag, $1)=
@@ -5534,12 +5671,14 @@
   # it will be wrapped by ` (' and `)$', so one must not match beginning or
   # end of line.  Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
   # as well as any symbol that contains `d'.
-  _LT_AC_TAGVAR(exclude_expsyms, $1)="_GLOBAL_OFFSET_TABLE_"
+  _LT_AC_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*']
   # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
   # platforms (ab)use it in PIC code, but their linkers get confused if
   # the symbol is explicitly referenced.  Since portable code cannot
   # rely on this symbol name, it's probably fine to never include it in
   # preloaded symbol tables.
+  # Exclude shared library initialization/finalization symbols.
+dnl Note also adjust exclude_expsyms for C++ above.
   extract_expsyms_cmds=
   # Just being paranoid about ensuring that cc_basename is set.
   _LT_CC_BASENAME([$compiler])
@@ -5589,7 +5728,7 @@
 
     # See if GNU ld supports shared libraries.
     case $host_os in
-    aix3* | aix4* | aix5*)
+    aix[[3-9]]*)
       # On AIX/PPC, the GNU linker is very broken
       if test "$host_cpu" != ia64; then
 	_LT_AC_TAGVAR(ld_shlibs, $1)=no
@@ -5655,7 +5794,7 @@
       fi
       ;;
 
-    interix3*)
+    interix[[3-9]]*)
       _LT_AC_TAGVAR(hardcode_direct, $1)=no
       _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
       _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
@@ -5808,7 +5947,7 @@
       fi
       ;;
 
-    aix4* | aix5*)
+    aix[[4-9]]*)
       if test "$host_cpu" = ia64; then
 	# On IA64, the linker does run time linking by default, so we don't
 	# have to do anything special.
@@ -5828,7 +5967,7 @@
 	# Test if we are trying to use run time linking or normal
 	# AIX style linking. If -brtl is somewhere in LDFLAGS, we
 	# need to do runtime linking.
-	case $host_os in aix4.[[23]]|aix4.[[23]].*|aix5*)
+	case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*)
 	  for ld_flag in $LDFLAGS; do
   	  if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
   	    aix_use_runtimelinking=yes
@@ -5988,19 +6127,18 @@
       _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
     if test "$GCC" = yes ; then
     	output_verbose_link_cmd='echo'
-        _LT_AC_TAGVAR(archive_cmds, $1)='$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
-      _LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
-      # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
-      _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-      _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag  -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+        _LT_AC_TAGVAR(archive_cmds, $1)="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}"
+        _LT_AC_TAGVAR(module_cmds, $1)="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}"
+        _LT_AC_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}"
+        _LT_AC_TAGVAR(module_expsym_cmds, $1)="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}"
     else
       case $cc_basename in
         xlc*)
          output_verbose_link_cmd='echo'
-         _LT_AC_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $verstring'
+         _LT_AC_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $xlcverstring'
          _LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
           # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
-         _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+         _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $xlcverstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
           _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag  -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
           ;;
        *)
@@ -6162,24 +6300,28 @@
       ;;
 
     openbsd*)
-      _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-      _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
-      if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
-	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
-	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-	_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+      if test -f /usr/libexec/ld.so; then
+	_LT_AC_TAGVAR(hardcode_direct, $1)=yes
+	_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+	if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+	  _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+	  _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
+	  _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+	  _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+	else
+	  case $host_os in
+	   openbsd[[01]].* | openbsd2.[[0-7]] | openbsd2.[[0-7]].*)
+	     _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+	     _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+	     ;;
+	   *)
+	     _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+	     _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+	     ;;
+	  esac
+        fi
       else
-       case $host_os in
-	 openbsd[[01]].* | openbsd2.[[0-7]] | openbsd2.[[0-7]].*)
-	   _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-	   _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-	   ;;
-	 *)
-	   _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
-	   _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-	   ;;
-       esac
+	_LT_AC_TAGVAR(ld_shlibs, $1)=no
       fi
       ;;
 
@@ -6569,7 +6711,7 @@
 AC_MSG_RESULT([$SED])
 ])
 
-# Copyright (C) 2002, 2003, 2005, 2006  Free Software Foundation, Inc.
+# Copyright (C) 2002, 2003, 2005, 2006, 2007  Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
@@ -6584,7 +6726,7 @@
 [am__api_version='1.10'
 dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to
 dnl require some minimum version.  Point them to the right macro.
-m4_if([$1], [1.10], [],
+m4_if([$1], [1.10.1], [],
       [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl
 ])
 
@@ -6600,8 +6742,10 @@
 # Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced.
 # This function is AC_REQUIREd by AC_INIT_AUTOMAKE.
 AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],
-[AM_AUTOMAKE_VERSION([1.10])dnl
-_AM_AUTOCONF_VERSION(m4_PACKAGE_VERSION)])
+[AM_AUTOMAKE_VERSION([1.10.1])dnl
+m4_ifndef([AC_AUTOCONF_VERSION],
+  [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
+_AM_AUTOCONF_VERSION(AC_AUTOCONF_VERSION)])
 
 # AM_AUX_DIR_EXPAND                                         -*- Autoconf -*-
 
@@ -6873,7 +7017,7 @@
   # each Makefile.in and add a new line on top of each file to say so.
   # Grep'ing the whole file is not good either: AIX grep has a line
   # limit of 2048, but all sed's we know have understand at least 4000.
-  if sed 10q "$mf" | grep '^#.*generated by automake' > /dev/null 2>&1; then
+  if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then
     dirpart=`AS_DIRNAME("$mf")`
   else
     continue
@@ -6933,13 +7077,13 @@
 # Do all the work for Automake.                             -*- Autoconf -*-
 
 # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
-# 2005, 2006 Free Software Foundation, Inc.
+# 2005, 2006, 2008 Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
 
-# serial 12
+# serial 13
 
 # This macro actually does too much.  Some checks are only needed if
 # your package does certain things.  But this isn't really a big deal.
@@ -7044,16 +7188,17 @@
 # our stamp files there.
 AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK],
 [# Compute $1's index in $config_headers.
+_am_arg=$1
 _am_stamp_count=1
 for _am_header in $config_headers :; do
   case $_am_header in
-    $1 | $1:* )
+    $_am_arg | $_am_arg:* )
       break ;;
     * )
       _am_stamp_count=`expr $_am_stamp_count + 1` ;;
   esac
 done
-echo "timestamp for $1" >`AS_DIRNAME([$1])`/stamp-h[]$_am_stamp_count])
+echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count])
 
 # Copyright (C) 2001, 2003, 2005  Free Software Foundation, Inc.
 #
@@ -7325,7 +7470,7 @@
 
 # _AM_SUBST_NOTMAKE(VARIABLE)
 # ---------------------------
-# Prevent Automake from outputing VARIABLE = @VARIABLE@ in Makefile.in.
+# Prevent Automake from outputting VARIABLE = @VARIABLE@ in Makefile.in.
 # This macro is traced by Automake.
 AC_DEFUN([_AM_SUBST_NOTMAKE])
 
diff -Nru /tmp/bxdedfLB6u/uriparser-0.6.0/build-aux/config.guess /tmp/fLjZ2dz9P3/uriparser-0.7.4/build-aux/config.guess
--- uriparser-0.6.0/build-aux/config.guess	1970-01-01 01:00:00.000000000 +0100
+++ uriparser-0.7.4/build-aux/config.guess	2008-12-23 02:31:20.000000000 +0000
@@ -0,0 +1,1552 @@
+#! /bin/sh
+# Attempt to guess a canonical system name.
+#   Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
+#   2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008
+#   Free Software Foundation, Inc.
+
+timestamp='2008-12-19'
+
+# This file is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA
+# 02110-1301, USA.
+#
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+
+# Originally written by Per Bothner <per@bothner.com>.
+# Please send patches to <config-patches@gnu.org>.  Submit a context
+# diff and a properly formatted ChangeLog entry.
+#
+# This script attempts to guess a canonical system name similar to
+# config.sub.  If it succeeds, it prints the system name on stdout, and
+# exits with 0.  Otherwise, it exits with 1.
+#
+# The plan is that this can be called by configure scripts if you
+# don't specify an explicit build system type.
+
+me=`echo "$0" | sed -e 's,.*/,,'`
+
+usage="\
+Usage: $0 [OPTION]
+
+Output the configuration name of the system \`$me' is run on.
+
+Operation modes:
+  -h, --help         print this help, then exit
+  -t, --time-stamp   print date of last modification, then exit
+  -v, --version      print version number, then exit
+
+Report bugs and patches to <config-patches@gnu.org>."
+
+version="\
+GNU config.guess ($timestamp)
+
+Originally written by Per Bothner.
+Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001,
+2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
+
+This is free software; see the source for copying conditions.  There is NO
+warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
+
+help="
+Try \`$me --help' for more information."
+
+# Parse command line
+while test $# -gt 0 ; do
+  case $1 in
+    --time-stamp | --time* | -t )
+       echo "$timestamp" ; exit ;;
+    --version | -v )
+       echo "$version" ; exit ;;
+    --help | --h* | -h )
+       echo "$usage"; exit ;;
+    -- )     # Stop option processing
+       shift; break ;;
+    - )	# Use stdin as input.
+       break ;;
+    -* )
+       echo "$me: invalid option $1$help" >&2
+       exit 1 ;;
+    * )
+       break ;;
+  esac
+done
+
+if test $# != 0; then
+  echo "$me: too many arguments$help" >&2
+  exit 1
+fi
+
+trap 'exit 1' 1 2 15
+
+# CC_FOR_BUILD -- compiler used by this script. Note that the use of a
+# compiler to aid in system detection is discouraged as it requires
+# temporary files to be created and, as you can see below, it is a
+# headache to deal with in a portable fashion.
+
+# Historically, `CC_FOR_BUILD' used to be named `HOST_CC'. We still
+# use `HOST_CC' if defined, but it is deprecated.
+
+# Portable tmp directory creation inspired by the Autoconf team.
+
+set_cc_for_build='
+trap "exitcode=\$?; (rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null) && exit \$exitcode" 0 ;
+trap "rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null; exit 1" 1 2 13 15 ;
+: ${TMPDIR=/tmp} ;
+ { tmp=`(umask 077 && mktemp -d "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } ||
+ { test -n "$RANDOM" && tmp=$TMPDIR/cg$$-$RANDOM && (umask 077 && mkdir $tmp) ; } ||
+ { tmp=$TMPDIR/cg-$$ && (umask 077 && mkdir $tmp) && echo "Warning: creating insecure temp directory" >&2 ; } ||
+ { echo "$me: cannot create a temporary directory in $TMPDIR" >&2 ; exit 1 ; } ;
+dummy=$tmp/dummy ;
+tmpfiles="$dummy.c $dummy.o $dummy.rel $dummy" ;
+case $CC_FOR_BUILD,$HOST_CC,$CC in
+ ,,)    echo "int x;" > $dummy.c ;
+	for c in cc gcc c89 c99 ; do
+	  if ($c -c -o $dummy.o $dummy.c) >/dev/null 2>&1 ; then
+	     CC_FOR_BUILD="$c"; break ;
+	  fi ;
+	done ;
+	if test x"$CC_FOR_BUILD" = x ; then
+	  CC_FOR_BUILD=no_compiler_found ;
+	fi
+	;;
+ ,,*)   CC_FOR_BUILD=$CC ;;
+ ,*,*)  CC_FOR_BUILD=$HOST_CC ;;
+esac ; set_cc_for_build= ;'
+
+# This is needed to find uname on a Pyramid OSx when run in the BSD universe.
+# (ghazi@noc.rutgers.edu 1994-08-24)
+if (test -f /.attbin/uname) >/dev/null 2>&1 ; then
+	PATH=$PATH:/.attbin ; export PATH
+fi
+
+UNAME_MACHINE=`(uname -m) 2>/dev/null` || UNAME_MACHINE=unknown
+UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown
+UNAME_SYSTEM=`(uname -s) 2>/dev/null`  || UNAME_SYSTEM=unknown
+UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown
+
+# Note: order is significant - the case branches are not exclusive.
+
+case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
+    *:NetBSD:*:*)
+	# NetBSD (nbsd) targets should (where applicable) match one or
+	# more of the tupples: *-*-netbsdelf*, *-*-netbsdaout*,
+	# *-*-netbsdecoff* and *-*-netbsd*.  For targets that recently
+	# switched to ELF, *-*-netbsd* would select the old
+	# object file format.  This provides both forward
+	# compatibility and a consistent mechanism for selecting the
+	# object file format.
+	#
+	# Note: NetBSD doesn't particularly care about the vendor
+	# portion of the name.  We always set it to "unknown".
+	sysctl="sysctl -n hw.machine_arch"
+	UNAME_MACHINE_ARCH=`(/sbin/$sysctl 2>/dev/null || \
+	    /usr/sbin/$sysctl 2>/dev/null || echo unknown)`
+	case "${UNAME_MACHINE_ARCH}" in
+	    armeb) machine=armeb-unknown ;;
+	    arm*) machine=arm-unknown ;;
+	    sh3el) machine=shl-unknown ;;
+	    sh3eb) machine=sh-unknown ;;
+	    sh5el) machine=sh5le-unknown ;;
+	    *) machine=${UNAME_MACHINE_ARCH}-unknown ;;
+	esac
+	# The Operating System including object format, if it has switched
+	# to ELF recently, or will in the future.
+	case "${UNAME_MACHINE_ARCH}" in
+	    arm*|i386|m68k|ns32k|sh3*|sparc|vax)
+		eval $set_cc_for_build
+		if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \
+			| grep __ELF__ >/dev/null
+		then
+		    # Once all utilities can be ECOFF (netbsdecoff) or a.out (netbsdaout).
+		    # Return netbsd for either.  FIX?
+		    os=netbsd
+		else
+		    os=netbsdelf
+		fi
+		;;
+	    *)
+	        os=netbsd
+		;;
+	esac
+	# The OS release
+	# Debian GNU/NetBSD machines have a different userland, and
+	# thus, need a distinct triplet. However, they do not need
+	# kernel version information, so it can be replaced with a
+	# suitable tag, in the style of linux-gnu.
+	case "${UNAME_VERSION}" in
+	    Debian*)
+		release='-gnu'
+		;;
+	    *)
+		release=`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'`
+		;;
+	esac
+	# Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM:
+	# contains redundant information, the shorter form:
+	# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used.
+	echo "${machine}-${os}${release}"
+	exit ;;
+    *:OpenBSD:*:*)
+	UNAME_MACHINE_ARCH=`arch | sed 's/OpenBSD.//'`
+	echo ${UNAME_MACHINE_ARCH}-unknown-openbsd${UNAME_RELEASE}
+	exit ;;
+    *:ekkoBSD:*:*)
+	echo ${UNAME_MACHINE}-unknown-ekkobsd${UNAME_RELEASE}
+	exit ;;
+    *:SolidBSD:*:*)
+	echo ${UNAME_MACHINE}-unknown-solidbsd${UNAME_RELEASE}
+	exit ;;
+    macppc:MirBSD:*:*)
+	echo powerpc-unknown-mirbsd${UNAME_RELEASE}
+	exit ;;
+    *:MirBSD:*:*)
+	echo ${UNAME_MACHINE}-unknown-mirbsd${UNAME_RELEASE}
+	exit ;;
+    alpha:OSF1:*:*)
+	case $UNAME_RELEASE in
+	*4.0)
+		UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'`
+		;;
+	*5.*)
+	        UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $4}'`
+		;;
+	esac
+	# According to Compaq, /usr/sbin/psrinfo has been available on
+	# OSF/1 and Tru64 systems produced since 1995.  I hope that
+	# covers most systems running today.  This code pipes the CPU
+	# types through head -n 1, so we only detect the type of CPU 0.
+	ALPHA_CPU_TYPE=`/usr/sbin/psrinfo -v | sed -n -e 's/^  The alpha \(.*\) processor.*$/\1/p' | head -n 1`
+	case "$ALPHA_CPU_TYPE" in
+	    "EV4 (21064)")
+		UNAME_MACHINE="alpha" ;;
+	    "EV4.5 (21064)")
+		UNAME_MACHINE="alpha" ;;
+	    "LCA4 (21066/21068)")
+		UNAME_MACHINE="alpha" ;;
+	    "EV5 (21164)")
+		UNAME_MACHINE="alphaev5" ;;
+	    "EV5.6 (21164A)")
+		UNAME_MACHINE="alphaev56" ;;
+	    "EV5.6 (21164PC)")
+		UNAME_MACHINE="alphapca56" ;;
+	    "EV5.7 (21164PC)")
+		UNAME_MACHINE="alphapca57" ;;
+	    "EV6 (21264)")
+		UNAME_MACHINE="alphaev6" ;;
+	    "EV6.7 (21264A)")
+		UNAME_MACHINE="alphaev67" ;;
+	    "EV6.8CB (21264C)")
+		UNAME_MACHINE="alphaev68" ;;
+	    "EV6.8AL (21264B)")
+		UNAME_MACHINE="alphaev68" ;;
+	    "EV6.8CX (21264D)")
+		UNAME_MACHINE="alphaev68" ;;
+	    "EV6.9A (21264/EV69A)")
+		UNAME_MACHINE="alphaev69" ;;
+	    "EV7 (21364)")
+		UNAME_MACHINE="alphaev7" ;;
+	    "EV7.9 (21364A)")
+		UNAME_MACHINE="alphaev79" ;;
+	esac
+	# A Pn.n version is a patched version.
+	# A Vn.n version is a released version.
+	# A Tn.n version is a released field test version.
+	# A Xn.n version is an unreleased experimental baselevel.
+	# 1.2 uses "1.2" for uname -r.
+	echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[PVTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
+	exit ;;
+    Alpha\ *:Windows_NT*:*)
+	# How do we know it's Interix rather than the generic POSIX subsystem?
+	# Should we change UNAME_MACHINE based on the output of uname instead
+	# of the specific Alpha model?
+	echo alpha-pc-interix
+	exit ;;
+    21064:Windows_NT:50:3)
+	echo alpha-dec-winnt3.5
+	exit ;;
+    Amiga*:UNIX_System_V:4.0:*)
+	echo m68k-unknown-sysv4
+	exit ;;
+    *:[Aa]miga[Oo][Ss]:*:*)
+	echo ${UNAME_MACHINE}-unknown-amigaos
+	exit ;;
+    *:[Mm]orph[Oo][Ss]:*:*)
+	echo ${UNAME_MACHINE}-unknown-morphos
+	exit ;;
+    *:OS/390:*:*)
+	echo i370-ibm-openedition
+	exit ;;
+    *:z/VM:*:*)
+	echo s390-ibm-zvmoe
+	exit ;;
+    *:OS400:*:*)
+        echo powerpc-ibm-os400
+	exit ;;
+    arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*)
+	echo arm-acorn-riscix${UNAME_RELEASE}
+	exit ;;
+    arm:riscos:*:*|arm:RISCOS:*:*)
+	echo arm-unknown-riscos
+	exit ;;
+    SR2?01:HI-UX/MPP:*:* | SR8000:HI-UX/MPP:*:*)
+	echo hppa1.1-hitachi-hiuxmpp
+	exit ;;
+    Pyramid*:OSx*:*:* | MIS*:OSx*:*:* | MIS*:SMP_DC-OSx*:*:*)
+	# akee@wpdis03.wpafb.af.mil (Earle F. Ake) contributed MIS and NILE.
+	if test "`(/bin/universe) 2>/dev/null`" = att ; then
+		echo pyramid-pyramid-sysv3
+	else
+		echo pyramid-pyramid-bsd
+	fi
+	exit ;;
+    NILE*:*:*:dcosx)
+	echo pyramid-pyramid-svr4
+	exit ;;
+    DRS?6000:unix:4.0:6*)
+	echo sparc-icl-nx6
+	exit ;;
+    DRS?6000:UNIX_SV:4.2*:7* | DRS?6000:isis:4.2*:7*)
+	case `/usr/bin/uname -p` in
+	    sparc) echo sparc-icl-nx7; exit ;;
+	esac ;;
+    sun4H:SunOS:5.*:*)
+	echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+	exit ;;
+    sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*)
+	echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+	exit ;;
+    i86pc:SunOS:5.*:* | i86xen:SunOS:5.*:*)
+	eval $set_cc_for_build
+	SUN_ARCH="i386"
+	# If there is a compiler, see if it is configured for 64-bit objects.
+	# Note that the Sun cc does not turn __LP64__ into 1 like gcc does.
+	# This test works for both compilers.
+	if [ "$CC_FOR_BUILD" != 'no_compiler_found' ]; then
+	    if (echo '#ifdef __amd64'; echo IS_64BIT_ARCH; echo '#endif') | \
+		(CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | \
+		grep IS_64BIT_ARCH >/dev/null
+	    then
+		SUN_ARCH="x86_64"
+	    fi
+	fi
+	echo ${SUN_ARCH}-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+	exit ;;
+    sun4*:SunOS:6*:*)
+	# According to config.sub, this is the proper way to canonicalize
+	# SunOS6.  Hard to guess exactly what SunOS6 will be like, but
+	# it's likely to be more like Solaris than SunOS4.
+	echo sparc-sun-solaris3`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+	exit ;;
+    sun4*:SunOS:*:*)
+	case "`/usr/bin/arch -k`" in
+	    Series*|S4*)
+		UNAME_RELEASE=`uname -v`
+		;;
+	esac
+	# Japanese Language versions have a version number like `4.1.3-JL'.
+	echo sparc-sun-sunos`echo ${UNAME_RELEASE}|sed -e 's/-/_/'`
+	exit ;;
+    sun3*:SunOS:*:*)
+	echo m68k-sun-sunos${UNAME_RELEASE}
+	exit ;;
+    sun*:*:4.2BSD:*)
+	UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null`
+	test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3
+	case "`/bin/arch`" in
+	    sun3)
+		echo m68k-sun-sunos${UNAME_RELEASE}
+		;;
+	    sun4)
+		echo sparc-sun-sunos${UNAME_RELEASE}
+		;;
+	esac
+	exit ;;
+    aushp:SunOS:*:*)
+	echo sparc-auspex-sunos${UNAME_RELEASE}
+	exit ;;
+    # The situation for MiNT is a little confusing.  The machine name
+    # can be virtually everything (everything which is not
+    # "atarist" or "atariste" at least should have a processor
+    # > m68000).  The system name ranges from "MiNT" over "FreeMiNT"
+    # to the lowercase version "mint" (or "freemint").  Finally
+    # the system name "TOS" denotes a system which is actually not
+    # MiNT.  But MiNT is downward compatible to TOS, so this should
+    # be no problem.
+    atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*)
+        echo m68k-atari-mint${UNAME_RELEASE}
+	exit ;;
+    atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*)
+	echo m68k-atari-mint${UNAME_RELEASE}
+        exit ;;
+    *falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*)
+        echo m68k-atari-mint${UNAME_RELEASE}
+	exit ;;
+    milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*)
+        echo m68k-milan-mint${UNAME_RELEASE}
+        exit ;;
+    hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*)
+        echo m68k-hades-mint${UNAME_RELEASE}
+        exit ;;
+    *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*)
+        echo m68k-unknown-mint${UNAME_RELEASE}
+        exit ;;
+    m68k:machten:*:*)
+	echo m68k-apple-machten${UNAME_RELEASE}
+	exit ;;
+    powerpc:machten:*:*)
+	echo powerpc-apple-machten${UNAME_RELEASE}
+	exit ;;
+    RISC*:Mach:*:*)
+	echo mips-dec-mach_bsd4.3
+	exit ;;
+    RISC*:ULTRIX:*:*)
+	echo mips-dec-ultrix${UNAME_RELEASE}
+	exit ;;
+    VAX*:ULTRIX*:*:*)
+	echo vax-dec-ultrix${UNAME_RELEASE}
+	exit ;;
+    2020:CLIX:*:* | 2430:CLIX:*:*)
+	echo clipper-intergraph-clix${UNAME_RELEASE}
+	exit ;;
+    mips:*:*:UMIPS | mips:*:*:RISCos)
+	eval $set_cc_for_build
+	sed 's/^	//' << EOF >$dummy.c
+#ifdef __cplusplus
+#include <stdio.h>  /* for printf() prototype */
+	int main (int argc, char *argv[]) {
+#else
+	int main (argc, argv) int argc; char *argv[]; {
+#endif
+	#if defined (host_mips) && defined (MIPSEB)
+	#if defined (SYSTYPE_SYSV)
+	  printf ("mips-mips-riscos%ssysv\n", argv[1]); exit (0);
+	#endif
+	#if defined (SYSTYPE_SVR4)
+	  printf ("mips-mips-riscos%ssvr4\n", argv[1]); exit (0);
+	#endif
+	#if defined (SYSTYPE_BSD43) || defined(SYSTYPE_BSD)
+	  printf ("mips-mips-riscos%sbsd\n", argv[1]); exit (0);
+	#endif
+	#endif
+	  exit (-1);
+	}
+EOF
+	$CC_FOR_BUILD -o $dummy $dummy.c &&
+	  dummyarg=`echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` &&
+	  SYSTEM_NAME=`$dummy $dummyarg` &&
+	    { echo "$SYSTEM_NAME"; exit; }
+	echo mips-mips-riscos${UNAME_RELEASE}
+	exit ;;
+    Motorola:PowerMAX_OS:*:*)
+	echo powerpc-motorola-powermax
+	exit ;;
+    Motorola:*:4.3:PL8-*)
+	echo powerpc-harris-powermax
+	exit ;;
+    Night_Hawk:*:*:PowerMAX_OS | Synergy:PowerMAX_OS:*:*)
+	echo powerpc-harris-powermax
+	exit ;;
+    Night_Hawk:Power_UNIX:*:*)
+	echo powerpc-harris-powerunix
+	exit ;;
+    m88k:CX/UX:7*:*)
+	echo m88k-harris-cxux7
+	exit ;;
+    m88k:*:4*:R4*)
+	echo m88k-motorola-sysv4
+	exit ;;
+    m88k:*:3*:R3*)
+	echo m88k-motorola-sysv3
+	exit ;;
+    AViiON:dgux:*:*)
+        # DG/UX returns AViiON for all architectures
+        UNAME_PROCESSOR=`/usr/bin/uname -p`
+	if [ $UNAME_PROCESSOR = mc88100 ] || [ $UNAME_PROCESSOR = mc88110 ]
+	then
+	    if [ ${TARGET_BINARY_INTERFACE}x = m88kdguxelfx ] || \
+	       [ ${TARGET_BINARY_INTERFACE}x = x ]
+	    then
+		echo m88k-dg-dgux${UNAME_RELEASE}
+	    else
+		echo m88k-dg-dguxbcs${UNAME_RELEASE}
+	    fi
+	else
+	    echo i586-dg-dgux${UNAME_RELEASE}
+	fi
+ 	exit ;;
+    M88*:DolphinOS:*:*)	# DolphinOS (SVR3)
+	echo m88k-dolphin-sysv3
+	exit ;;
+    M88*:*:R3*:*)
+	# Delta 88k system running SVR3
+	echo m88k-motorola-sysv3
+	exit ;;
+    XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3)
+	echo m88k-tektronix-sysv3
+	exit ;;
+    Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD)
+	echo m68k-tektronix-bsd
+	exit ;;
+    *:IRIX*:*:*)
+	echo mips-sgi-irix`echo ${UNAME_RELEASE}|sed -e 's/-/_/g'`
+	exit ;;
+    ????????:AIX?:[12].1:2)   # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX.
+	echo romp-ibm-aix     # uname -m gives an 8 hex-code CPU id
+	exit ;;               # Note that: echo "'`uname -s`'" gives 'AIX '
+    i*86:AIX:*:*)
+	echo i386-ibm-aix
+	exit ;;
+    ia64:AIX:*:*)
+	if [ -x /usr/bin/oslevel ] ; then
+		IBM_REV=`/usr/bin/oslevel`
+	else
+		IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE}
+	fi
+	echo ${UNAME_MACHINE}-ibm-aix${IBM_REV}
+	exit ;;
+    *:AIX:2:3)
+	if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then
+		eval $set_cc_for_build
+		sed 's/^		//' << EOF >$dummy.c
+		#include <sys/systemcfg.h>
+
+		main()
+			{
+			if (!__power_pc())
+				exit(1);
+			puts("powerpc-ibm-aix3.2.5");
+			exit(0);
+			}
+EOF
+		if $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy`
+		then
+			echo "$SYSTEM_NAME"
+		else
+			echo rs6000-ibm-aix3.2.5
+		fi
+	elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then
+		echo rs6000-ibm-aix3.2.4
+	else
+		echo rs6000-ibm-aix3.2
+	fi
+	exit ;;
+    *:AIX:*:[456])
+	IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'`
+	if /usr/sbin/lsattr -El ${IBM_CPU_ID} | grep ' POWER' >/dev/null 2>&1; then
+		IBM_ARCH=rs6000
+	else
+		IBM_ARCH=powerpc
+	fi
+	if [ -x /usr/bin/oslevel ] ; then
+		IBM_REV=`/usr/bin/oslevel`
+	else
+		IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE}
+	fi
+	echo ${IBM_ARCH}-ibm-aix${IBM_REV}
+	exit ;;
+    *:AIX:*:*)
+	echo rs6000-ibm-aix
+	exit ;;
+    ibmrt:4.4BSD:*|romp-ibm:BSD:*)
+	echo romp-ibm-bsd4.4
+	exit ;;
+    ibmrt:*BSD:*|romp-ibm:BSD:*)            # covers RT/PC BSD and
+	echo romp-ibm-bsd${UNAME_RELEASE}   # 4.3 with uname added to
+	exit ;;                             # report: romp-ibm BSD 4.3
+    *:BOSX:*:*)
+	echo rs6000-bull-bosx
+	exit ;;
+    DPX/2?00:B.O.S.:*:*)
+	echo m68k-bull-sysv3
+	exit ;;
+    9000/[34]??:4.3bsd:1.*:*)
+	echo m68k-hp-bsd
+	exit ;;
+    hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*)
+	echo m68k-hp-bsd4.4
+	exit ;;
+    9000/[34678]??:HP-UX:*:*)
+	HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
+	case "${UNAME_MACHINE}" in
+	    9000/31? )            HP_ARCH=m68000 ;;
+	    9000/[34]?? )         HP_ARCH=m68k ;;
+	    9000/[678][0-9][0-9])
+		if [ -x /usr/bin/getconf ]; then
+		    sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null`
+                    sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null`
+                    case "${sc_cpu_version}" in
+                      523) HP_ARCH="hppa1.0" ;; # CPU_PA_RISC1_0
+                      528) HP_ARCH="hppa1.1" ;; # CPU_PA_RISC1_1
+                      532)                      # CPU_PA_RISC2_0
+                        case "${sc_kernel_bits}" in
+                          32) HP_ARCH="hppa2.0n" ;;
+                          64) HP_ARCH="hppa2.0w" ;;
+			  '') HP_ARCH="hppa2.0" ;;   # HP-UX 10.20
+                        esac ;;
+                    esac
+		fi
+		if [ "${HP_ARCH}" = "" ]; then
+		    eval $set_cc_for_build
+		    sed 's/^              //' << EOF >$dummy.c
+
+              #define _HPUX_SOURCE
+              #include <stdlib.h>
+              #include <unistd.h>
+
+              int main ()
+              {
+              #if defined(_SC_KERNEL_BITS)
+                  long bits = sysconf(_SC_KERNEL_BITS);
+              #endif
+                  long cpu  = sysconf (_SC_CPU_VERSION);
+
+                  switch (cpu)
+              	{
+              	case CPU_PA_RISC1_0: puts ("hppa1.0"); break;
+              	case CPU_PA_RISC1_1: puts ("hppa1.1"); break;
+              	case CPU_PA_RISC2_0:
+              #if defined(_SC_KERNEL_BITS)
+              	    switch (bits)
+              		{
+              		case 64: puts ("hppa2.0w"); break;
+              		case 32: puts ("hppa2.0n"); break;
+              		default: puts ("hppa2.0"); break;
+              		} break;
+              #else  /* !defined(_SC_KERNEL_BITS) */
+              	    puts ("hppa2.0"); break;
+              #endif
+              	default: puts ("hppa1.0"); break;
+              	}
+                  exit (0);
+              }
+EOF
+		    (CCOPTS= $CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null) && HP_ARCH=`$dummy`
+		    test -z "$HP_ARCH" && HP_ARCH=hppa
+		fi ;;
+	esac
+	if [ ${HP_ARCH} = "hppa2.0w" ]
+	then
+	    eval $set_cc_for_build
+
+	    # hppa2.0w-hp-hpux* has a 64-bit kernel and a compiler generating
+	    # 32-bit code.  hppa64-hp-hpux* has the same kernel and a compiler
+	    # generating 64-bit code.  GNU and HP use different nomenclature:
+	    #
+	    # $ CC_FOR_BUILD=cc ./config.guess
+	    # => hppa2.0w-hp-hpux11.23
+	    # $ CC_FOR_BUILD="cc +DA2.0w" ./config.guess
+	    # => hppa64-hp-hpux11.23
+
+	    if echo __LP64__ | (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) |
+		grep __LP64__ >/dev/null
+	    then
+		HP_ARCH="hppa2.0w"
+	    else
+		HP_ARCH="hppa64"
+	    fi
+	fi
+	echo ${HP_ARCH}-hp-hpux${HPUX_REV}
+	exit ;;
+    ia64:HP-UX:*:*)
+	HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
+	echo ia64-hp-hpux${HPUX_REV}
+	exit ;;
+    3050*:HI-UX:*:*)
+	eval $set_cc_for_build
+	sed 's/^	//' << EOF >$dummy.c
+	#include <unistd.h>
+	int
+	main ()
+	{
+	  long cpu = sysconf (_SC_CPU_VERSION);
+	  /* The order matters, because CPU_IS_HP_MC68K erroneously returns
+	     true for CPU_PA_RISC1_0.  CPU_IS_PA_RISC returns correct
+	     results, however.  */
+	  if (CPU_IS_PA_RISC (cpu))
+	    {
+	      switch (cpu)
+		{
+		  case CPU_PA_RISC1_0: puts ("hppa1.0-hitachi-hiuxwe2"); break;
+		  case CPU_PA_RISC1_1: puts ("hppa1.1-hitachi-hiuxwe2"); break;
+		  case CPU_PA_RISC2_0: puts ("hppa2.0-hitachi-hiuxwe2"); break;
+		  default: puts ("hppa-hitachi-hiuxwe2"); break;
+		}
+	    }
+	  else if (CPU_IS_HP_MC68K (cpu))
+	    puts ("m68k-hitachi-hiuxwe2");
+	  else puts ("unknown-hitachi-hiuxwe2");
+	  exit (0);
+	}
+EOF
+	$CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy` &&
+		{ echo "$SYSTEM_NAME"; exit; }
+	echo unknown-hitachi-hiuxwe2
+	exit ;;
+    9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:* )
+	echo hppa1.1-hp-bsd
+	exit ;;
+    9000/8??:4.3bsd:*:*)
+	echo hppa1.0-hp-bsd
+	exit ;;
+    *9??*:MPE/iX:*:* | *3000*:MPE/iX:*:*)
+	echo hppa1.0-hp-mpeix
+	exit ;;
+    hp7??:OSF1:*:* | hp8?[79]:OSF1:*:* )
+	echo hppa1.1-hp-osf
+	exit ;;
+    hp8??:OSF1:*:*)
+	echo hppa1.0-hp-osf
+	exit ;;
+    i*86:OSF1:*:*)
+	if [ -x /usr/sbin/sysversion ] ; then
+	    echo ${UNAME_MACHINE}-unknown-osf1mk
+	else
+	    echo ${UNAME_MACHINE}-unknown-osf1
+	fi
+	exit ;;
+    parisc*:Lites*:*:*)
+	echo hppa1.1-hp-lites
+	exit ;;
+    C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*)
+	echo c1-convex-bsd
+        exit ;;
+    C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*)
+	if getsysinfo -f scalar_acc
+	then echo c32-convex-bsd
+	else echo c2-convex-bsd
+	fi
+        exit ;;
+    C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*)
+	echo c34-convex-bsd
+        exit ;;
+    C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*)
+	echo c38-convex-bsd
+        exit ;;
+    C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*)
+	echo c4-convex-bsd
+        exit ;;
+    CRAY*Y-MP:*:*:*)
+	echo ymp-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+	exit ;;
+    CRAY*[A-Z]90:*:*:*)
+	echo ${UNAME_MACHINE}-cray-unicos${UNAME_RELEASE} \
+	| sed -e 's/CRAY.*\([A-Z]90\)/\1/' \
+	      -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/ \
+	      -e 's/\.[^.]*$/.X/'
+	exit ;;
+    CRAY*TS:*:*:*)
+	echo t90-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+	exit ;;
+    CRAY*T3E:*:*:*)
+	echo alphaev5-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+	exit ;;
+    CRAY*SV1:*:*:*)
+	echo sv1-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+	exit ;;
+    *:UNICOS/mp:*:*)
+	echo craynv-cray-unicosmp${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+	exit ;;
+    F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*)
+	FUJITSU_PROC=`uname -m | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
+        FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
+        FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'`
+        echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
+        exit ;;
+    5000:UNIX_System_V:4.*:*)
+        FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
+        FUJITSU_REL=`echo ${UNAME_RELEASE} | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/ /_/'`
+        echo "sparc-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
+	exit ;;
+    i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*)
+	echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE}
+	exit ;;
+    sparc*:BSD/OS:*:*)
+	echo sparc-unknown-bsdi${UNAME_RELEASE}
+	exit ;;
+    *:BSD/OS:*:*)
+	echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE}
+	exit ;;
+    *:FreeBSD:*:*)
+	case ${UNAME_MACHINE} in
+	    pc98)
+		echo i386-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;;
+	    amd64)
+		echo x86_64-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;;
+	    *)
+		echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;;
+	esac
+	exit ;;
+    i*:CYGWIN*:*)
+	echo ${UNAME_MACHINE}-pc-cygwin
+	exit ;;
+    *:MINGW*:*)
+	echo ${UNAME_MACHINE}-pc-mingw32
+	exit ;;
+    i*:windows32*:*)
+    	# uname -m includes "-pc" on this system.
+    	echo ${UNAME_MACHINE}-mingw32
+	exit ;;
+    i*:PW*:*)
+	echo ${UNAME_MACHINE}-pc-pw32
+	exit ;;
+    *:Interix*:[3456]*)
+    	case ${UNAME_MACHINE} in
+	    x86)
+		echo i586-pc-interix${UNAME_RELEASE}
+		exit ;;
+	    EM64T | authenticamd | genuineintel)
+		echo x86_64-unknown-interix${UNAME_RELEASE}
+		exit ;;
+	    IA64)
+		echo ia64-unknown-interix${UNAME_RELEASE}
+		exit ;;
+	esac ;;
+    [345]86:Windows_95:* | [345]86:Windows_98:* | [345]86:Windows_NT:*)
+	echo i${UNAME_MACHINE}-pc-mks
+	exit ;;
+    i*:Windows_NT*:* | Pentium*:Windows_NT*:*)
+	# How do we know it's Interix rather than the generic POSIX subsystem?
+	# It also conflicts with pre-2.0 versions of AT&T UWIN. Should we
+	# UNAME_MACHINE based on the output of uname instead of i386?
+	echo i586-pc-interix
+	exit ;;
+    i*:UWIN*:*)
+	echo ${UNAME_MACHINE}-pc-uwin
+	exit ;;
+    amd64:CYGWIN*:*:* | x86_64:CYGWIN*:*:*)
+	echo x86_64-unknown-cygwin
+	exit ;;
+    p*:CYGWIN*:*)
+	echo powerpcle-unknown-cygwin
+	exit ;;
+    prep*:SunOS:5.*:*)
+	echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+	exit ;;
+    *:GNU:*:*)
+	# the GNU system
+	echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-gnu`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'`
+	exit ;;
+    *:GNU/*:*:*)
+	# other systems with GNU libc and userland
+	echo ${UNAME_MACHINE}-unknown-`echo ${UNAME_SYSTEM} | sed 's,^[^/]*/,,' | tr '[A-Z]' '[a-z]'``echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`-gnu
+	exit ;;
+    i*86:Minix:*:*)
+	echo ${UNAME_MACHINE}-pc-minix
+	exit ;;
+    arm*:Linux:*:*)
+	eval $set_cc_for_build
+	if echo __ARM_EABI__ | $CC_FOR_BUILD -E - 2>/dev/null \
+	    | grep -q __ARM_EABI__
+	then
+	    echo ${UNAME_MACHINE}-unknown-linux-gnu
+	else
+	    echo ${UNAME_MACHINE}-unknown-linux-gnueabi
+	fi
+	exit ;;
+    avr32*:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	exit ;;
+    cris:Linux:*:*)
+	echo cris-axis-linux-gnu
+	exit ;;
+    crisv32:Linux:*:*)
+	echo crisv32-axis-linux-gnu
+	exit ;;
+    frv:Linux:*:*)
+    	echo frv-unknown-linux-gnu
+	exit ;;
+    ia64:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	exit ;;
+    m32r*:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	exit ;;
+    m68*:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	exit ;;
+    mips:Linux:*:*)
+	eval $set_cc_for_build
+	sed 's/^	//' << EOF >$dummy.c
+	#undef CPU
+	#undef mips
+	#undef mipsel
+	#if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL)
+	CPU=mipsel
+	#else
+	#if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB)
+	CPU=mips
+	#else
+	CPU=
+	#endif
+	#endif
+EOF
+	eval "`$CC_FOR_BUILD -E $dummy.c 2>/dev/null | sed -n '
+	    /^CPU/{
+		s: ::g
+		p
+	    }'`"
+	test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; }
+	;;
+    mips64:Linux:*:*)
+	eval $set_cc_for_build
+	sed 's/^	//' << EOF >$dummy.c
+	#undef CPU
+	#undef mips64
+	#undef mips64el
+	#if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL)
+	CPU=mips64el
+	#else
+	#if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB)
+	CPU=mips64
+	#else
+	CPU=
+	#endif
+	#endif
+EOF
+	eval "`$CC_FOR_BUILD -E $dummy.c 2>/dev/null | sed -n '
+	    /^CPU/{
+		s: ::g
+		p
+	    }'`"
+	test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; }
+	;;
+    or32:Linux:*:*)
+	echo or32-unknown-linux-gnu
+	exit ;;
+    ppc:Linux:*:*)
+	echo powerpc-unknown-linux-gnu
+	exit ;;
+    ppc64:Linux:*:*)
+	echo powerpc64-unknown-linux-gnu
+	exit ;;
+    alpha:Linux:*:*)
+	case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in
+	  EV5)   UNAME_MACHINE=alphaev5 ;;
+	  EV56)  UNAME_MACHINE=alphaev56 ;;
+	  PCA56) UNAME_MACHINE=alphapca56 ;;
+	  PCA57) UNAME_MACHINE=alphapca56 ;;
+	  EV6)   UNAME_MACHINE=alphaev6 ;;
+	  EV67)  UNAME_MACHINE=alphaev67 ;;
+	  EV68*) UNAME_MACHINE=alphaev68 ;;
+        esac
+	objdump --private-headers /bin/sh | grep ld.so.1 >/dev/null
+	if test "$?" = 0 ; then LIBC="libc1" ; else LIBC="" ; fi
+	echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC}
+	exit ;;
+    padre:Linux:*:*)
+	echo sparc-unknown-linux-gnu
+	exit ;;
+    parisc:Linux:*:* | hppa:Linux:*:*)
+	# Look for CPU level
+	case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in
+	  PA7*) echo hppa1.1-unknown-linux-gnu ;;
+	  PA8*) echo hppa2.0-unknown-linux-gnu ;;
+	  *)    echo hppa-unknown-linux-gnu ;;
+	esac
+	exit ;;
+    parisc64:Linux:*:* | hppa64:Linux:*:*)
+	echo hppa64-unknown-linux-gnu
+	exit ;;
+    s390:Linux:*:* | s390x:Linux:*:*)
+	echo ${UNAME_MACHINE}-ibm-linux
+	exit ;;
+    sh64*:Linux:*:*)
+    	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	exit ;;
+    sh*:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	exit ;;
+    sparc:Linux:*:* | sparc64:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	exit ;;
+    vax:Linux:*:*)
+	echo ${UNAME_MACHINE}-dec-linux-gnu
+	exit ;;
+    x86_64:Linux:*:*)
+	echo x86_64-unknown-linux-gnu
+	exit ;;
+    xtensa*:Linux:*:*)
+    	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	exit ;;
+    i*86:Linux:*:*)
+	# The BFD linker knows what the default object file format is, so
+	# first see if it will tell us. cd to the root directory to prevent
+	# problems with other programs or directories called `ld' in the path.
+	# Set LC_ALL=C to ensure ld outputs messages in English.
+	ld_supported_targets=`cd /; LC_ALL=C ld --help 2>&1 \
+			 | sed -ne '/supported targets:/!d
+				    s/[ 	][ 	]*/ /g
+				    s/.*supported targets: *//
+				    s/ .*//
+				    p'`
+        case "$ld_supported_targets" in
+	  elf32-i386)
+		TENTATIVE="${UNAME_MACHINE}-pc-linux-gnu"
+		;;
+	  a.out-i386-linux)
+		echo "${UNAME_MACHINE}-pc-linux-gnuaout"
+		exit ;;
+	  "")
+		# Either a pre-BFD a.out linker (linux-gnuoldld) or
+		# one that does not give us useful --help.
+		echo "${UNAME_MACHINE}-pc-linux-gnuoldld"
+		exit ;;
+	esac
+	# Determine whether the default compiler is a.out or elf
+	eval $set_cc_for_build
+	sed 's/^	//' << EOF >$dummy.c
+	#include <features.h>
+	#ifdef __ELF__
+	# ifdef __GLIBC__
+	#  if __GLIBC__ >= 2
+	LIBC=gnu
+	#  else
+	LIBC=gnulibc1
+	#  endif
+	# else
+	LIBC=gnulibc1
+	# endif
+	#else
+	#if defined(__INTEL_COMPILER) || defined(__PGI) || defined(__SUNPRO_C) || defined(__SUNPRO_CC)
+	LIBC=gnu
+	#else
+	LIBC=gnuaout
+	#endif
+	#endif
+	#ifdef __dietlibc__
+	LIBC=dietlibc
+	#endif
+EOF
+	eval "`$CC_FOR_BUILD -E $dummy.c 2>/dev/null | sed -n '
+	    /^LIBC/{
+		s: ::g
+		p
+	    }'`"
+	test x"${LIBC}" != x && {
+		echo "${UNAME_MACHINE}-pc-linux-${LIBC}"
+		exit
+	}
+	test x"${TENTATIVE}" != x && { echo "${TENTATIVE}"; exit; }
+	;;
+    i*86:DYNIX/ptx:4*:*)
+	# ptx 4.0 does uname -s correctly, with DYNIX/ptx in there.
+	# earlier versions are messed up and put the nodename in both
+	# sysname and nodename.
+	echo i386-sequent-sysv4
+	exit ;;
+    i*86:UNIX_SV:4.2MP:2.*)
+        # Unixware is an offshoot of SVR4, but it has its own version
+        # number series starting with 2...
+        # I am not positive that other SVR4 systems won't match this,
+	# I just have to hope.  -- rms.
+        # Use sysv4.2uw... so that sysv4* matches it.
+	echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION}
+	exit ;;
+    i*86:OS/2:*:*)
+	# If we were able to find `uname', then EMX Unix compatibility
+	# is probably installed.
+	echo ${UNAME_MACHINE}-pc-os2-emx
+	exit ;;
+    i*86:XTS-300:*:STOP)
+	echo ${UNAME_MACHINE}-unknown-stop
+	exit ;;
+    i*86:atheos:*:*)
+	echo ${UNAME_MACHINE}-unknown-atheos
+	exit ;;
+    i*86:syllable:*:*)
+	echo ${UNAME_MACHINE}-pc-syllable
+	exit ;;
+    i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.0*:*)
+	echo i386-unknown-lynxos${UNAME_RELEASE}
+	exit ;;
+    i*86:*DOS:*:*)
+	echo ${UNAME_MACHINE}-pc-msdosdjgpp
+	exit ;;
+    i*86:*:4.*:* | i*86:SYSTEM_V:4.*:*)
+	UNAME_REL=`echo ${UNAME_RELEASE} | sed 's/\/MP$//'`
+	if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then
+		echo ${UNAME_MACHINE}-univel-sysv${UNAME_REL}
+	else
+		echo ${UNAME_MACHINE}-pc-sysv${UNAME_REL}
+	fi
+	exit ;;
+    i*86:*:5:[678]*)
+    	# UnixWare 7.x, OpenUNIX and OpenServer 6.
+	case `/bin/uname -X | grep "^Machine"` in
+	    *486*)	     UNAME_MACHINE=i486 ;;
+	    *Pentium)	     UNAME_MACHINE=i586 ;;
+	    *Pent*|*Celeron) UNAME_MACHINE=i686 ;;
+	esac
+	echo ${UNAME_MACHINE}-unknown-sysv${UNAME_RELEASE}${UNAME_SYSTEM}${UNAME_VERSION}
+	exit ;;
+    i*86:*:3.2:*)
+	if test -f /usr/options/cb.name; then
+		UNAME_REL=`sed -n 's/.*Version //p' </usr/options/cb.name`
+		echo ${UNAME_MACHINE}-pc-isc$UNAME_REL
+	elif /bin/uname -X 2>/dev/null >/dev/null ; then
+		UNAME_REL=`(/bin/uname -X|grep Release|sed -e 's/.*= //')`
+		(/bin/uname -X|grep i80486 >/dev/null) && UNAME_MACHINE=i486
+		(/bin/uname -X|grep '^Machine.*Pentium' >/dev/null) \
+			&& UNAME_MACHINE=i586
+		(/bin/uname -X|grep '^Machine.*Pent *II' >/dev/null) \
+			&& UNAME_MACHINE=i686
+		(/bin/uname -X|grep '^Machine.*Pentium Pro' >/dev/null) \
+			&& UNAME_MACHINE=i686
+		echo ${UNAME_MACHINE}-pc-sco$UNAME_REL
+	else
+		echo ${UNAME_MACHINE}-pc-sysv32
+	fi
+	exit ;;
+    pc:*:*:*)
+	# Left here for compatibility:
+        # uname -m prints for DJGPP always 'pc', but it prints nothing about
+        # the processor, so we play safe by assuming i386.
+	echo i386-pc-msdosdjgpp
+        exit ;;
+    Intel:Mach:3*:*)
+	echo i386-pc-mach3
+	exit ;;
+    paragon:*:*:*)
+	echo i860-intel-osf1
+	exit ;;
+    i860:*:4.*:*) # i860-SVR4
+	if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then
+	  echo i860-stardent-sysv${UNAME_RELEASE} # Stardent Vistra i860-SVR4
+	else # Add other i860-SVR4 vendors below as they are discovered.
+	  echo i860-unknown-sysv${UNAME_RELEASE}  # Unknown i860-SVR4
+	fi
+	exit ;;
+    mini*:CTIX:SYS*5:*)
+	# "miniframe"
+	echo m68010-convergent-sysv
+	exit ;;
+    mc68k:UNIX:SYSTEM5:3.51m)
+	echo m68k-convergent-sysv
+	exit ;;
+    M680?0:D-NIX:5.3:*)
+	echo m68k-diab-dnix
+	exit ;;
+    M68*:*:R3V[5678]*:*)
+	test -r /sysV68 && { echo 'm68k-motorola-sysv'; exit; } ;;
+    3[345]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0 | SDS2:*:4.0:3.0 | SHG2:*:4.0:3.0 | S7501*:*:4.0:3.0)
+	OS_REL=''
+	test -r /etc/.relid \
+	&& OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid`
+	/bin/uname -p 2>/dev/null | grep 86 >/dev/null \
+	  && { echo i486-ncr-sysv4.3${OS_REL}; exit; }
+	/bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \
+	  && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;;
+    3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*)
+        /bin/uname -p 2>/dev/null | grep 86 >/dev/null \
+          && { echo i486-ncr-sysv4; exit; } ;;
+    NCR*:*:4.2:* | MPRAS*:*:4.2:*)
+	OS_REL='.3'
+	test -r /etc/.relid \
+	    && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid`
+	/bin/uname -p 2>/dev/null | grep 86 >/dev/null \
+	    && { echo i486-ncr-sysv4.3${OS_REL}; exit; }
+	/bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \
+	    && { echo i586-ncr-sysv4.3${OS_REL}; exit; }
+	/bin/uname -p 2>/dev/null | /bin/grep pteron >/dev/null \
+	    && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;;
+    m68*:LynxOS:2.*:* | m68*:LynxOS:3.0*:*)
+	echo m68k-unknown-lynxos${UNAME_RELEASE}
+	exit ;;
+    mc68030:UNIX_System_V:4.*:*)
+	echo m68k-atari-sysv4
+	exit ;;
+    TSUNAMI:LynxOS:2.*:*)
+	echo sparc-unknown-lynxos${UNAME_RELEASE}
+	exit ;;
+    rs6000:LynxOS:2.*:*)
+	echo rs6000-unknown-lynxos${UNAME_RELEASE}
+	exit ;;
+    PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.0*:*)
+	echo powerpc-unknown-lynxos${UNAME_RELEASE}
+	exit ;;
+    SM[BE]S:UNIX_SV:*:*)
+	echo mips-dde-sysv${UNAME_RELEASE}
+	exit ;;
+    RM*:ReliantUNIX-*:*:*)
+	echo mips-sni-sysv4
+	exit ;;
+    RM*:SINIX-*:*:*)
+	echo mips-sni-sysv4
+	exit ;;
+    *:SINIX-*:*:*)
+	if uname -p 2>/dev/null >/dev/null ; then
+		UNAME_MACHINE=`(uname -p) 2>/dev/null`
+		echo ${UNAME_MACHINE}-sni-sysv4
+	else
+		echo ns32k-sni-sysv
+	fi
+	exit ;;
+    PENTIUM:*:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort
+                      # says <Richard.M.Bartel@ccMail.Census.GOV>
+        echo i586-unisys-sysv4
+        exit ;;
+    *:UNIX_System_V:4*:FTX*)
+	# From Gerald Hewes <hewes@openmarket.com>.
+	# How about differentiating between stratus architectures? -djm
+	echo hppa1.1-stratus-sysv4
+	exit ;;
+    *:*:*:FTX*)
+	# From seanf@swdc.stratus.com.
+	echo i860-stratus-sysv4
+	exit ;;
+    i*86:VOS:*:*)
+	# From Paul.Green@stratus.com.
+	echo ${UNAME_MACHINE}-stratus-vos
+	exit ;;
+    *:VOS:*:*)
+	# From Paul.Green@stratus.com.
+	echo hppa1.1-stratus-vos
+	exit ;;
+    mc68*:A/UX:*:*)
+	echo m68k-apple-aux${UNAME_RELEASE}
+	exit ;;
+    news*:NEWS-OS:6*:*)
+	echo mips-sony-newsos6
+	exit ;;
+    R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*)
+	if [ -d /usr/nec ]; then
+	        echo mips-nec-sysv${UNAME_RELEASE}
+	else
+	        echo mips-unknown-sysv${UNAME_RELEASE}
+	fi
+        exit ;;
+    BeBox:BeOS:*:*)	# BeOS running on hardware made by Be, PPC only.
+	echo powerpc-be-beos
+	exit ;;
+    BeMac:BeOS:*:*)	# BeOS running on Mac or Mac clone, PPC only.
+	echo powerpc-apple-beos
+	exit ;;
+    BePC:BeOS:*:*)	# BeOS running on Intel PC compatible.
+	echo i586-pc-beos
+	exit ;;
+    BePC:Haiku:*:*)	# Haiku running on Intel PC compatible.
+	echo i586-pc-haiku
+	exit ;;
+    SX-4:SUPER-UX:*:*)
+	echo sx4-nec-superux${UNAME_RELEASE}
+	exit ;;
+    SX-5:SUPER-UX:*:*)
+	echo sx5-nec-superux${UNAME_RELEASE}
+	exit ;;
+    SX-6:SUPER-UX:*:*)
+	echo sx6-nec-superux${UNAME_RELEASE}
+	exit ;;
+    SX-7:SUPER-UX:*:*)
+	echo sx7-nec-superux${UNAME_RELEASE}
+	exit ;;
+    SX-8:SUPER-UX:*:*)
+	echo sx8-nec-superux${UNAME_RELEASE}
+	exit ;;
+    SX-8R:SUPER-UX:*:*)
+	echo sx8r-nec-superux${UNAME_RELEASE}
+	exit ;;
+    Power*:Rhapsody:*:*)
+	echo powerpc-apple-rhapsody${UNAME_RELEASE}
+	exit ;;
+    *:Rhapsody:*:*)
+	echo ${UNAME_MACHINE}-apple-rhapsody${UNAME_RELEASE}
+	exit ;;
+    *:Darwin:*:*)
+	UNAME_PROCESSOR=`uname -p` || UNAME_PROCESSOR=unknown
+	case $UNAME_PROCESSOR in
+	    unknown) UNAME_PROCESSOR=powerpc ;;
+	esac
+	echo ${UNAME_PROCESSOR}-apple-darwin${UNAME_RELEASE}
+	exit ;;
+    *:procnto*:*:* | *:QNX:[0123456789]*:*)
+	UNAME_PROCESSOR=`uname -p`
+	if test "$UNAME_PROCESSOR" = "x86"; then
+		UNAME_PROCESSOR=i386
+		UNAME_MACHINE=pc
+	fi
+	echo ${UNAME_PROCESSOR}-${UNAME_MACHINE}-nto-qnx${UNAME_RELEASE}
+	exit ;;
+    *:QNX:*:4*)
+	echo i386-pc-qnx
+	exit ;;
+    NSE-?:NONSTOP_KERNEL:*:*)
+	echo nse-tandem-nsk${UNAME_RELEASE}
+	exit ;;
+    NSR-?:NONSTOP_KERNEL:*:*)
+	echo nsr-tandem-nsk${UNAME_RELEASE}
+	exit ;;
+    *:NonStop-UX:*:*)
+	echo mips-compaq-nonstopux
+	exit ;;
+    BS2000:POSIX*:*:*)
+	echo bs2000-siemens-sysv
+	exit ;;
+    DS/*:UNIX_System_V:*:*)
+	echo ${UNAME_MACHINE}-${UNAME_SYSTEM}-${UNAME_RELEASE}
+	exit ;;
+    *:Plan9:*:*)
+	# "uname -m" is not consistent, so use $cputype instead. 386
+	# is converted to i386 for consistency with other x86
+	# operating systems.
+	if test "$cputype" = "386"; then
+	    UNAME_MACHINE=i386
+	else
+	    UNAME_MACHINE="$cputype"
+	fi
+	echo ${UNAME_MACHINE}-unknown-plan9
+	exit ;;
+    *:TOPS-10:*:*)
+	echo pdp10-unknown-tops10
+	exit ;;
+    *:TENEX:*:*)
+	echo pdp10-unknown-tenex
+	exit ;;
+    KS10:TOPS-20:*:* | KL10:TOPS-20:*:* | TYPE4:TOPS-20:*:*)
+	echo pdp10-dec-tops20
+	exit ;;
+    XKL-1:TOPS-20:*:* | TYPE5:TOPS-20:*:*)
+	echo pdp10-xkl-tops20
+	exit ;;
+    *:TOPS-20:*:*)
+	echo pdp10-unknown-tops20
+	exit ;;
+    *:ITS:*:*)
+	echo pdp10-unknown-its
+	exit ;;
+    SEI:*:*:SEIUX)
+        echo mips-sei-seiux${UNAME_RELEASE}
+	exit ;;
+    *:DragonFly:*:*)
+	echo ${UNAME_MACHINE}-unknown-dragonfly`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`
+	exit ;;
+    *:*VMS:*:*)
+    	UNAME_MACHINE=`(uname -p) 2>/dev/null`
+	case "${UNAME_MACHINE}" in
+	    A*) echo alpha-dec-vms ; exit ;;
+	    I*) echo ia64-dec-vms ; exit ;;
+	    V*) echo vax-dec-vms ; exit ;;
+	esac ;;
+    *:XENIX:*:SysV)
+	echo i386-pc-xenix
+	exit ;;
+    i*86:skyos:*:*)
+	echo ${UNAME_MACHINE}-pc-skyos`echo ${UNAME_RELEASE}` | sed -e 's/ .*$//'
+	exit ;;
+    i*86:rdos:*:*)
+	echo ${UNAME_MACHINE}-pc-rdos
+	exit ;;
+esac
+
+#echo '(No uname command or uname output not recognized.)' 1>&2
+#echo "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" 1>&2
+
+eval $set_cc_for_build
+cat >$dummy.c <<EOF
+#ifdef _SEQUENT_
+# include <sys/types.h>
+# include <sys/utsname.h>
+#endif
+main ()
+{
+#if defined (sony)
+#if defined (MIPSEB)
+  /* BFD wants "bsd" instead of "newsos".  Perhaps BFD should be changed,
+     I don't know....  */
+  printf ("mips-sony-bsd\n"); exit (0);
+#else
+#include <sys/param.h>
+  printf ("m68k-sony-newsos%s\n",
+#ifdef NEWSOS4
+          "4"
+#else
+	  ""
+#endif
+         ); exit (0);
+#endif
+#endif
+
+#if defined (__arm) && defined (__acorn) && defined (__unix)
+  printf ("arm-acorn-riscix\n"); exit (0);
+#endif
+
+#if defined (hp300) && !defined (hpux)
+  printf ("m68k-hp-bsd\n"); exit (0);
+#endif
+
+#if defined (NeXT)
+#if !defined (__ARCHITECTURE__)
+#define __ARCHITECTURE__ "m68k"
+#endif
+  int version;
+  version=`(hostinfo | sed -n 's/.*NeXT Mach \([0-9]*\).*/\1/p') 2>/dev/null`;
+  if (version < 4)
+    printf ("%s-next-nextstep%d\n", __ARCHITECTURE__, version);
+  else
+    printf ("%s-next-openstep%d\n", __ARCHITECTURE__, version);
+  exit (0);
+#endif
+
+#if defined (MULTIMAX) || defined (n16)
+#if defined (UMAXV)
+  printf ("ns32k-encore-sysv\n"); exit (0);
+#else
+#if defined (CMU)
+  printf ("ns32k-encore-mach\n"); exit (0);
+#else
+  printf ("ns32k-encore-bsd\n"); exit (0);
+#endif
+#endif
+#endif
+
+#if defined (__386BSD__)
+  printf ("i386-pc-bsd\n"); exit (0);
+#endif
+
+#if defined (sequent)
+#if defined (i386)
+  printf ("i386-sequent-dynix\n"); exit (0);
+#endif
+#if defined (ns32000)
+  printf ("ns32k-sequent-dynix\n"); exit (0);
+#endif
+#endif
+
+#if defined (_SEQUENT_)
+    struct utsname un;
+
+    uname(&un);
+
+    if (strncmp(un.version, "V2", 2) == 0) {
+	printf ("i386-sequent-ptx2\n"); exit (0);
+    }
+    if (strncmp(un.version, "V1", 2) == 0) { /* XXX is V1 correct? */
+	printf ("i386-sequent-ptx1\n"); exit (0);
+    }
+    printf ("i386-sequent-ptx\n"); exit (0);
+
+#endif
+
+#if defined (vax)
+# if !defined (ultrix)
+#  include <sys/param.h>
+#  if defined (BSD)
+#   if BSD == 43
+      printf ("vax-dec-bsd4.3\n"); exit (0);
+#   else
+#    if BSD == 199006
+      printf ("vax-dec-bsd4.3reno\n"); exit (0);
+#    else
+      printf ("vax-dec-bsd\n"); exit (0);
+#    endif
+#   endif
+#  else
+    printf ("vax-dec-bsd\n"); exit (0);
+#  endif
+# else
+    printf ("vax-dec-ultrix\n"); exit (0);
+# endif
+#endif
+
+#if defined (alliant) && defined (i860)
+  printf ("i860-alliant-bsd\n"); exit (0);
+#endif
+
+  exit (1);
+}
+EOF
+
+$CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null && SYSTEM_NAME=`$dummy` &&
+	{ echo "$SYSTEM_NAME"; exit; }
+
+# Apollos put the system type in the environment.
+
+test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit; }
+
+# Convex versions that predate uname can use getsysinfo(1)
+
+if [ -x /usr/convex/getsysinfo ]
+then
+    case `getsysinfo -f cpu_type` in
+    c1*)
+	echo c1-convex-bsd
+	exit ;;
+    c2*)
+	if getsysinfo -f scalar_acc
+	then echo c32-convex-bsd
+	else echo c2-convex-bsd
+	fi
+	exit ;;
+    c34*)
+	echo c34-convex-bsd
+	exit ;;
+    c38*)
+	echo c38-convex-bsd
+	exit ;;
+    c4*)
+	echo c4-convex-bsd
+	exit ;;
+    esac
+fi
+
+cat >&2 <<EOF
+$0: unable to guess system type
+
+This script, last modified $timestamp, has failed to recognize
+the operating system you are using. It is advised that you
+download the most up to date version of the config scripts from
+
+  http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess;hb=HEAD
+and
+  http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub;hb=HEAD
+
+If the version you run ($0) is already up to date, please
+send the following data and any information you think might be
+pertinent to <config-patches@gnu.org> in order to provide the needed
+information to handle your system.
+
+config.guess timestamp = $timestamp
+
+uname -m = `(uname -m) 2>/dev/null || echo unknown`
+uname -r = `(uname -r) 2>/dev/null || echo unknown`
+uname -s = `(uname -s) 2>/dev/null || echo unknown`
+uname -v = `(uname -v) 2>/dev/null || echo unknown`
+
+/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null`
+/bin/uname -X     = `(/bin/uname -X) 2>/dev/null`
+
+hostinfo               = `(hostinfo) 2>/dev/null`
+/bin/universe          = `(/bin/universe) 2>/dev/null`
+/usr/bin/arch -k       = `(/usr/bin/arch -k) 2>/dev/null`
+/bin/arch              = `(/bin/arch) 2>/dev/null`
+/usr/bin/oslevel       = `(/usr/bin/oslevel) 2>/dev/null`
+/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null`
+
+UNAME_MACHINE = ${UNAME_MACHINE}
+UNAME_RELEASE = ${UNAME_RELEASE}
+UNAME_SYSTEM  = ${UNAME_SYSTEM}
+UNAME_VERSION = ${UNAME_VERSION}
+EOF
+
+exit 1
+
+# Local variables:
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "timestamp='"
+# time-stamp-format: "%:y-%02m-%02d"
+# time-stamp-end: "'"
+# End:
diff -Nru /tmp/bxdedfLB6u/uriparser-0.6.0/build-aux/config.sub /tmp/fLjZ2dz9P3/uriparser-0.7.4/build-aux/config.sub
--- uriparser-0.6.0/build-aux/config.sub	1970-01-01 01:00:00.000000000 +0100
+++ uriparser-0.7.4/build-aux/config.sub	2008-12-23 02:31:19.000000000 +0000
@@ -0,0 +1,1676 @@
+#! /bin/sh
+# Configuration validation subroutine script.
+#   Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
+#   2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008
+#   Free Software Foundation, Inc.
+
+timestamp='2008-01-16'
+
+# This file is (in principle) common to ALL GNU software.
+# The presence of a machine in this file suggests that SOME GNU software
+# can handle that machine.  It does not imply ALL GNU software can.
+#
+# This file is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA
+# 02110-1301, USA.
+#
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+
+# Please send patches to <config-patches@gnu.org>.  Submit a context
+# diff and a properly formatted ChangeLog entry.
+#
+# Configuration subroutine to validate and canonicalize a configuration type.
+# Supply the specified configuration type as an argument.
+# If it is invalid, we print an error message on stderr and exit with code 1.
+# Otherwise, we print the canonical config type on stdout and succeed.
+
+# This file is supposed to be the same for all GNU packages
+# and recognize all the CPU types, system types and aliases
+# that are meaningful with *any* GNU software.
+# Each package is responsible for reporting which valid configurations
+# it does not support.  The user should be able to distinguish
+# a failure to support a valid configuration from a meaningless
+# configuration.
+
+# The goal of this file is to map all the various variations of a given
+# machine specification into a single specification in the form:
+#	CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM
+# or in some cases, the newer four-part form:
+#	CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM
+# It is wrong to echo any other type of specification.
+
+me=`echo "$0" | sed -e 's,.*/,,'`
+
+usage="\
+Usage: $0 [OPTION] CPU-MFR-OPSYS
+       $0 [OPTION] ALIAS
+
+Canonicalize a configuration name.
+
+Operation modes:
+  -h, --help         print this help, then exit
+  -t, --time-stamp   print date of last modification, then exit
+  -v, --version      print version number, then exit
+
+Report bugs and patches to <config-patches@gnu.org>."
+
+version="\
+GNU config.sub ($timestamp)
+
+Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001,
+2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
+
+This is free software; see the source for copying conditions.  There is NO
+warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
+
+help="
+Try \`$me --help' for more information."
+
+# Parse command line
+while test $# -gt 0 ; do
+  case $1 in
+    --time-stamp | --time* | -t )
+       echo "$timestamp" ; exit ;;
+    --version | -v )
+       echo "$version" ; exit ;;
+    --help | --h* | -h )
+       echo "$usage"; exit ;;
+    -- )     # Stop option processing
+       shift; break ;;
+    - )	# Use stdin as input.
+       break ;;
+    -* )
+       echo "$me: invalid option $1$help"
+       exit 1 ;;
+
+    *local*)
+       # First pass through any local machine types.
+       echo $1
+       exit ;;
+
+    * )
+       break ;;
+  esac
+done
+
+case $# in
+ 0) echo "$me: missing argument$help" >&2
+    exit 1;;
+ 1) ;;
+ *) echo "$me: too many arguments$help" >&2
+    exit 1;;
+esac
+
+# Separate what the user gave into CPU-COMPANY and OS or KERNEL-OS (if any).
+# Here we must recognize all the valid KERNEL-OS combinations.
+maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'`
+case $maybe_os in
+  nto-qnx* | linux-gnu* | linux-dietlibc | linux-newlib* | linux-uclibc* | \
+  uclinux-uclibc* | uclinux-gnu* | kfreebsd*-gnu* | knetbsd*-gnu* | netbsd*-gnu* | \
+  storm-chaos* | os2-emx* | rtmk-nova*)
+    os=-$maybe_os
+    basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`
+    ;;
+  *)
+    basic_machine=`echo $1 | sed 's/-[^-]*$//'`
+    if [ $basic_machine != $1 ]
+    then os=`echo $1 | sed 's/.*-/-/'`
+    else os=; fi
+    ;;
+esac
+
+### Let's recognize common machines as not being operating systems so
+### that things like config.sub decstation-3100 work.  We also
+### recognize some manufacturers as not being operating systems, so we
+### can provide default operating systems below.
+case $os in
+	-sun*os*)
+		# Prevent following clause from handling this invalid input.
+		;;
+	-dec* | -mips* | -sequent* | -encore* | -pc532* | -sgi* | -sony* | \
+	-att* | -7300* | -3300* | -delta* | -motorola* | -sun[234]* | \
+	-unicom* | -ibm* | -next | -hp | -isi* | -apollo | -altos* | \
+	-convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\
+	-c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \
+	-harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \
+	-apple | -axis | -knuth | -cray)
+		os=
+		basic_machine=$1
+		;;
+	-sim | -cisco | -oki | -wec | -winbond)
+		os=
+		basic_machine=$1
+		;;
+	-scout)
+		;;
+	-wrs)
+		os=-vxworks
+		basic_machine=$1
+		;;
+	-chorusos*)
+		os=-chorusos
+		basic_machine=$1
+		;;
+ 	-chorusrdb)
+ 		os=-chorusrdb
+		basic_machine=$1
+ 		;;
+	-hiux*)
+		os=-hiuxwe2
+		;;
+	-sco6)
+		os=-sco5v6
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+		;;
+	-sco5)
+		os=-sco3.2v5
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+		;;
+	-sco4)
+		os=-sco3.2v4
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+		;;
+	-sco3.2.[4-9]*)
+		os=`echo $os | sed -e 's/sco3.2./sco3.2v/'`
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+		;;
+	-sco3.2v[4-9]*)
+		# Don't forget version if it is 3.2v4 or newer.
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+		;;
+	-sco5v6*)
+		# Don't forget version if it is 3.2v4 or newer.
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+		;;
+	-sco*)
+		os=-sco3.2v2
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+		;;
+	-udk*)
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+		;;
+	-isc)
+		os=-isc2.2
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+		;;
+	-clix*)
+		basic_machine=clipper-intergraph
+		;;
+	-isc*)
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+		;;
+	-lynx*)
+		os=-lynxos
+		;;
+	-ptx*)
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-sequent/'`
+		;;
+	-windowsnt*)
+		os=`echo $os | sed -e 's/windowsnt/winnt/'`
+		;;
+	-psos*)
+		os=-psos
+		;;
+	-mint | -mint[0-9]*)
+		basic_machine=m68k-atari
+		os=-mint
+		;;
+esac
+
+# Decode aliases for certain CPU-COMPANY combinations.
+case $basic_machine in
+	# Recognize the basic CPU types without company name.
+	# Some are omitted here because they have special meanings below.
+	1750a | 580 \
+	| a29k \
+	| alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \
+	| alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] | alpha64pca5[67] \
+	| am33_2.0 \
+	| arc | arm | arm[bl]e | arme[lb] | armv[2345] | armv[345][lb] | avr | avr32 \
+	| bfin \
+	| c4x | clipper \
+	| d10v | d30v | dlx | dsp16xx | dvp \
+	| fido | fr30 | frv \
+	| h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \
+	| i370 | i860 | i960 | ia64 \
+	| ip2k | iq2000 \
+	| m32c | m32r | m32rle | m68000 | m68k | m88k \
+	| maxq | mb | microblaze | mcore | mep \
+	| mips | mipsbe | mipseb | mipsel | mipsle \
+	| mips16 \
+	| mips64 | mips64el \
+	| mips64vr | mips64vrel \
+	| mips64orion | mips64orionel \
+	| mips64vr4100 | mips64vr4100el \
+	| mips64vr4300 | mips64vr4300el \
+	| mips64vr5000 | mips64vr5000el \
+	| mips64vr5900 | mips64vr5900el \
+	| mipsisa32 | mipsisa32el \
+	| mipsisa32r2 | mipsisa32r2el \
+	| mipsisa64 | mipsisa64el \
+	| mipsisa64r2 | mipsisa64r2el \
+	| mipsisa64sb1 | mipsisa64sb1el \
+	| mipsisa64sr71k | mipsisa64sr71kel \
+	| mipstx39 | mipstx39el \
+	| mn10200 | mn10300 \
+	| mt \
+	| msp430 \
+	| nios | nios2 \
+	| ns16k | ns32k \
+	| or32 \
+	| pdp10 | pdp11 | pj | pjl \
+	| powerpc | powerpc64 | powerpc64le | powerpcle | ppcbe \
+	| pyramid \
+	| score \
+	| sh | sh[1234] | sh[24]a | sh[24]a*eb | sh[23]e | sh[34]eb | sheb | shbe | shle | sh[1234]le | sh3ele \
+	| sh64 | sh64le \
+	| sparc | sparc64 | sparc64b | sparc64v | sparc86x | sparclet | sparclite \
+	| sparcv8 | sparcv9 | sparcv9b | sparcv9v \
+	| spu | strongarm \
+	| tahoe | thumb | tic4x | tic80 | tron \
+	| v850 | v850e \
+	| we32k \
+	| x86 | xc16x | xscale | xscalee[bl] | xstormy16 | xtensa \
+	| z8k)
+		basic_machine=$basic_machine-unknown
+		;;
+	m6811 | m68hc11 | m6812 | m68hc12)
+		# Motorola 68HC11/12.
+		basic_machine=$basic_machine-unknown
+		os=-none
+		;;
+	m88110 | m680[12346]0 | m683?2 | m68360 | m5200 | v70 | w65 | z8k)
+		;;
+	ms1)
+		basic_machine=mt-unknown
+		;;
+
+	# We use `pc' rather than `unknown'
+	# because (1) that's what they normally are, and
+	# (2) the word "unknown" tends to confuse beginning users.
+	i*86 | x86_64)
+	  basic_machine=$basic_machine-pc
+	  ;;
+	# Object if more than one company name word.
+	*-*-*)
+		echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2
+		exit 1
+		;;
+	# Recognize the basic CPU types with company name.
+	580-* \
+	| a29k-* \
+	| alpha-* | alphaev[4-8]-* | alphaev56-* | alphaev6[78]-* \
+	| alpha64-* | alpha64ev[4-8]-* | alpha64ev56-* | alpha64ev6[78]-* \
+	| alphapca5[67]-* | alpha64pca5[67]-* | arc-* \
+	| arm-*  | armbe-* | armle-* | armeb-* | armv*-* \
+	| avr-* | avr32-* \
+	| bfin-* | bs2000-* \
+	| c[123]* | c30-* | [cjt]90-* | c4x-* | c54x-* | c55x-* | c6x-* \
+	| clipper-* | craynv-* | cydra-* \
+	| d10v-* | d30v-* | dlx-* \
+	| elxsi-* \
+	| f30[01]-* | f700-* | fido-* | fr30-* | frv-* | fx80-* \
+	| h8300-* | h8500-* \
+	| hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \
+	| i*86-* | i860-* | i960-* | ia64-* \
+	| ip2k-* | iq2000-* \
+	| m32c-* | m32r-* | m32rle-* \
+	| m68000-* | m680[012346]0-* | m68360-* | m683?2-* | m68k-* \
+	| m88110-* | m88k-* | maxq-* | mcore-* \
+	| mips-* | mipsbe-* | mipseb-* | mipsel-* | mipsle-* \
+	| mips16-* \
+	| mips64-* | mips64el-* \
+	| mips64vr-* | mips64vrel-* \
+	| mips64orion-* | mips64orionel-* \
+	| mips64vr4100-* | mips64vr4100el-* \
+	| mips64vr4300-* | mips64vr4300el-* \
+	| mips64vr5000-* | mips64vr5000el-* \
+	| mips64vr5900-* | mips64vr5900el-* \
+	| mipsisa32-* | mipsisa32el-* \
+	| mipsisa32r2-* | mipsisa32r2el-* \
+	| mipsisa64-* | mipsisa64el-* \
+	| mipsisa64r2-* | mipsisa64r2el-* \
+	| mipsisa64sb1-* | mipsisa64sb1el-* \
+	| mipsisa64sr71k-* | mipsisa64sr71kel-* \
+	| mipstx39-* | mipstx39el-* \
+	| mmix-* \
+	| mt-* \
+	| msp430-* \
+	| nios-* | nios2-* \
+	| none-* | np1-* | ns16k-* | ns32k-* \
+	| orion-* \
+	| pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \
+	| powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* | ppcbe-* \
+	| pyramid-* \
+	| romp-* | rs6000-* \
+	| sh-* | sh[1234]-* | sh[24]a-* | sh[24]a*eb-* | sh[23]e-* | sh[34]eb-* | sheb-* | shbe-* \
+	| shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \
+	| sparc-* | sparc64-* | sparc64b-* | sparc64v-* | sparc86x-* | sparclet-* \
+	| sparclite-* \
+	| sparcv8-* | sparcv9-* | sparcv9b-* | sparcv9v-* | strongarm-* | sv1-* | sx?-* \
+	| tahoe-* | thumb-* \
+	| tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* \
+	| tron-* \
+	| v850-* | v850e-* | vax-* \
+	| we32k-* \
+	| x86-* | x86_64-* | xc16x-* | xps100-* | xscale-* | xscalee[bl]-* \
+	| xstormy16-* | xtensa*-* \
+	| ymp-* \
+	| z8k-*)
+		;;
+	# Recognize the basic CPU types without company name, with glob match.
+	xtensa*)
+		basic_machine=$basic_machine-unknown
+		;;
+	# Recognize the various machine names and aliases which stand
+	# for a CPU type and a company and sometimes even an OS.
+	386bsd)
+		basic_machine=i386-unknown
+		os=-bsd
+		;;
+	3b1 | 7300 | 7300-att | att-7300 | pc7300 | safari | unixpc)
+		basic_machine=m68000-att
+		;;
+	3b*)
+		basic_machine=we32k-att
+		;;
+	a29khif)
+		basic_machine=a29k-amd
+		os=-udi
+		;;
+    	abacus)
+		basic_machine=abacus-unknown
+		;;
+	adobe68k)
+		basic_machine=m68010-adobe
+		os=-scout
+		;;
+	alliant | fx80)
+		basic_machine=fx80-alliant
+		;;
+	altos | altos3068)
+		basic_machine=m68k-altos
+		;;
+	am29k)
+		basic_machine=a29k-none
+		os=-bsd
+		;;
+	amd64)
+		basic_machine=x86_64-pc
+		;;
+	amd64-*)
+		basic_machine=x86_64-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	amdahl)
+		basic_machine=580-amdahl
+		os=-sysv
+		;;
+	amiga | amiga-*)
+		basic_machine=m68k-unknown
+		;;
+	amigaos | amigados)
+		basic_machine=m68k-unknown
+		os=-amigaos
+		;;
+	amigaunix | amix)
+		basic_machine=m68k-unknown
+		os=-sysv4
+		;;
+	apollo68)
+		basic_machine=m68k-apollo
+		os=-sysv
+		;;
+	apollo68bsd)
+		basic_machine=m68k-apollo
+		os=-bsd
+		;;
+	aux)
+		basic_machine=m68k-apple
+		os=-aux
+		;;
+	balance)
+		basic_machine=ns32k-sequent
+		os=-dynix
+		;;
+	blackfin)
+		basic_machine=bfin-unknown
+		os=-linux
+		;;
+	blackfin-*)
+		basic_machine=bfin-`echo $basic_machine | sed 's/^[^-]*-//'`
+		os=-linux
+		;;
+	c90)
+		basic_machine=c90-cray
+		os=-unicos
+		;;
+	convex-c1)
+		basic_machine=c1-convex
+		os=-bsd
+		;;
+	convex-c2)
+		basic_machine=c2-convex
+		os=-bsd
+		;;
+	convex-c32)
+		basic_machine=c32-convex
+		os=-bsd
+		;;
+	convex-c34)
+		basic_machine=c34-convex
+		os=-bsd
+		;;
+	convex-c38)
+		basic_machine=c38-convex
+		os=-bsd
+		;;
+	cray | j90)
+		basic_machine=j90-cray
+		os=-unicos
+		;;
+	craynv)
+		basic_machine=craynv-cray
+		os=-unicosmp
+		;;
+	cr16)
+		basic_machine=cr16-unknown
+		os=-elf
+		;;
+	crds | unos)
+		basic_machine=m68k-crds
+		;;
+	crisv32 | crisv32-* | etraxfs*)
+		basic_machine=crisv32-axis
+		;;
+	cris | cris-* | etrax*)
+		basic_machine=cris-axis
+		;;
+	crx)
+		basic_machine=crx-unknown
+		os=-elf
+		;;
+	da30 | da30-*)
+		basic_machine=m68k-da30
+		;;
+	decstation | decstation-3100 | pmax | pmax-* | pmin | dec3100 | decstatn)
+		basic_machine=mips-dec
+		;;
+	decsystem10* | dec10*)
+		basic_machine=pdp10-dec
+		os=-tops10
+		;;
+	decsystem20* | dec20*)
+		basic_machine=pdp10-dec
+		os=-tops20
+		;;
+	delta | 3300 | motorola-3300 | motorola-delta \
+	      | 3300-motorola | delta-motorola)
+		basic_machine=m68k-motorola
+		;;
+	delta88)
+		basic_machine=m88k-motorola
+		os=-sysv3
+		;;
+	djgpp)
+		basic_machine=i586-pc
+		os=-msdosdjgpp
+		;;
+	dpx20 | dpx20-*)
+		basic_machine=rs6000-bull
+		os=-bosx
+		;;
+	dpx2* | dpx2*-bull)
+		basic_machine=m68k-bull
+		os=-sysv3
+		;;
+	ebmon29k)
+		basic_machine=a29k-amd
+		os=-ebmon
+		;;
+	elxsi)
+		basic_machine=elxsi-elxsi
+		os=-bsd
+		;;
+	encore | umax | mmax)
+		basic_machine=ns32k-encore
+		;;
+	es1800 | OSE68k | ose68k | ose | OSE)
+		basic_machine=m68k-ericsson
+		os=-ose
+		;;
+	fx2800)
+		basic_machine=i860-alliant
+		;;
+	genix)
+		basic_machine=ns32k-ns
+		;;
+	gmicro)
+		basic_machine=tron-gmicro
+		os=-sysv
+		;;
+	go32)
+		basic_machine=i386-pc
+		os=-go32
+		;;
+	h3050r* | hiux*)
+		basic_machine=hppa1.1-hitachi
+		os=-hiuxwe2
+		;;
+	h8300hms)
+		basic_machine=h8300-hitachi
+		os=-hms
+		;;
+	h8300xray)
+		basic_machine=h8300-hitachi
+		os=-xray
+		;;
+	h8500hms)
+		basic_machine=h8500-hitachi
+		os=-hms
+		;;
+	harris)
+		basic_machine=m88k-harris
+		os=-sysv3
+		;;
+	hp300-*)
+		basic_machine=m68k-hp
+		;;
+	hp300bsd)
+		basic_machine=m68k-hp
+		os=-bsd
+		;;
+	hp300hpux)
+		basic_machine=m68k-hp
+		os=-hpux
+		;;
+	hp3k9[0-9][0-9] | hp9[0-9][0-9])
+		basic_machine=hppa1.0-hp
+		;;
+	hp9k2[0-9][0-9] | hp9k31[0-9])
+		basic_machine=m68000-hp
+		;;
+	hp9k3[2-9][0-9])
+		basic_machine=m68k-hp
+		;;
+	hp9k6[0-9][0-9] | hp6[0-9][0-9])
+		basic_machine=hppa1.0-hp
+		;;
+	hp9k7[0-79][0-9] | hp7[0-79][0-9])
+		basic_machine=hppa1.1-hp
+		;;
+	hp9k78[0-9] | hp78[0-9])
+		# FIXME: really hppa2.0-hp
+		basic_machine=hppa1.1-hp
+		;;
+	hp9k8[67]1 | hp8[67]1 | hp9k80[24] | hp80[24] | hp9k8[78]9 | hp8[78]9 | hp9k893 | hp893)
+		# FIXME: really hppa2.0-hp
+		basic_machine=hppa1.1-hp
+		;;
+	hp9k8[0-9][13679] | hp8[0-9][13679])
+		basic_machine=hppa1.1-hp
+		;;
+	hp9k8[0-9][0-9] | hp8[0-9][0-9])
+		basic_machine=hppa1.0-hp
+		;;
+	hppa-next)
+		os=-nextstep3
+		;;
+	hppaosf)
+		basic_machine=hppa1.1-hp
+		os=-osf
+		;;
+	hppro)
+		basic_machine=hppa1.1-hp
+		os=-proelf
+		;;
+	i370-ibm* | ibm*)
+		basic_machine=i370-ibm
+		;;
+# I'm not sure what "Sysv32" means.  Should this be sysv3.2?
+	i*86v32)
+		basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
+		os=-sysv32
+		;;
+	i*86v4*)
+		basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
+		os=-sysv4
+		;;
+	i*86v)
+		basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
+		os=-sysv
+		;;
+	i*86sol2)
+		basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
+		os=-solaris2
+		;;
+	i386mach)
+		basic_machine=i386-mach
+		os=-mach
+		;;
+	i386-vsta | vsta)
+		basic_machine=i386-unknown
+		os=-vsta
+		;;
+	iris | iris4d)
+		basic_machine=mips-sgi
+		case $os in
+		    -irix*)
+			;;
+		    *)
+			os=-irix4
+			;;
+		esac
+		;;
+	isi68 | isi)
+		basic_machine=m68k-isi
+		os=-sysv
+		;;
+	m68knommu)
+		basic_machine=m68k-unknown
+		os=-linux
+		;;
+	m68knommu-*)
+		basic_machine=m68k-`echo $basic_machine | sed 's/^[^-]*-//'`
+		os=-linux
+		;;
+	m88k-omron*)
+		basic_machine=m88k-omron
+		;;
+	magnum | m3230)
+		basic_machine=mips-mips
+		os=-sysv
+		;;
+	merlin)
+		basic_machine=ns32k-utek
+		os=-sysv
+		;;
+	mingw32)
+		basic_machine=i386-pc
+		os=-mingw32
+		;;
+	mingw32ce)
+		basic_machine=arm-unknown
+		os=-mingw32ce
+		;;
+	miniframe)
+		basic_machine=m68000-convergent
+		;;
+	*mint | -mint[0-9]* | *MiNT | *MiNT[0-9]*)
+		basic_machine=m68k-atari
+		os=-mint
+		;;
+	mipsEE* | ee | ps2)
+		basic_machine=mips64r5900el-scei
+		case $os in
+		    -linux*)
+			;;
+		    *)
+			os=-elf
+			;;
+		esac
+		;;
+	iop)
+		basic_machine=mipsel-scei
+		os=-irx
+		;;
+	dvp)
+		basic_machine=dvp-scei
+		os=-elf
+		;;
+	mips3*-*)
+		basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`
+		;;
+	mips3*)
+		basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`-unknown
+		;;
+	monitor)
+		basic_machine=m68k-rom68k
+		os=-coff
+		;;
+	morphos)
+		basic_machine=powerpc-unknown
+		os=-morphos
+		;;
+	msdos)
+		basic_machine=i386-pc
+		os=-msdos
+		;;
+	ms1-*)
+		basic_machine=`echo $basic_machine | sed -e 's/ms1-/mt-/'`
+		;;
+	mvs)
+		basic_machine=i370-ibm
+		os=-mvs
+		;;
+	ncr3000)
+		basic_machine=i486-ncr
+		os=-sysv4
+		;;
+	netbsd386)
+		basic_machine=i386-unknown
+		os=-netbsd
+		;;
+	netwinder)
+		basic_machine=armv4l-rebel
+		os=-linux
+		;;
+	news | news700 | news800 | news900)
+		basic_machine=m68k-sony
+		os=-newsos
+		;;
+	news1000)
+		basic_machine=m68030-sony
+		os=-newsos
+		;;
+	news-3600 | risc-news)
+		basic_machine=mips-sony
+		os=-newsos
+		;;
+	necv70)
+		basic_machine=v70-nec
+		os=-sysv
+		;;
+	next | m*-next )
+		basic_machine=m68k-next
+		case $os in
+		    -nextstep* )
+			;;
+		    -ns2*)
+		      os=-nextstep2
+			;;
+		    *)
+		      os=-nextstep3
+			;;
+		esac
+		;;
+	nh3000)
+		basic_machine=m68k-harris
+		os=-cxux
+		;;
+	nh[45]000)
+		basic_machine=m88k-harris
+		os=-cxux
+		;;
+	nindy960)
+		basic_machine=i960-intel
+		os=-nindy
+		;;
+	mon960)
+		basic_machine=i960-intel
+		os=-mon960
+		;;
+	nonstopux)
+		basic_machine=mips-compaq
+		os=-nonstopux
+		;;
+	np1)
+		basic_machine=np1-gould
+		;;
+	nsr-tandem)
+		basic_machine=nsr-tandem
+		;;
+	op50n-* | op60c-*)
+		basic_machine=hppa1.1-oki
+		os=-proelf
+		;;
+	openrisc | openrisc-*)
+		basic_machine=or32-unknown
+		;;
+	os400)
+		basic_machine=powerpc-ibm
+		os=-os400
+		;;
+	OSE68000 | ose68000)
+		basic_machine=m68000-ericsson
+		os=-ose
+		;;
+	os68k)
+		basic_machine=m68k-none
+		os=-os68k
+		;;
+	pa-hitachi)
+		basic_machine=hppa1.1-hitachi
+		os=-hiuxwe2
+		;;
+	paragon)
+		basic_machine=i860-intel
+		os=-osf
+		;;
+	parisc)
+		basic_machine=hppa-unknown
+		os=-linux
+		;;
+	parisc-*)
+		basic_machine=hppa-`echo $basic_machine | sed 's/^[^-]*-//'`
+		os=-linux
+		;;
+	pbd)
+		basic_machine=sparc-tti
+		;;
+	pbb)
+		basic_machine=m68k-tti
+		;;
+	pc532 | pc532-*)
+		basic_machine=ns32k-pc532
+		;;
+	pc98)
+		basic_machine=i386-pc
+		;;
+	pc98-*)
+		basic_machine=i386-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	pentium | p5 | k5 | k6 | nexgen | viac3)
+		basic_machine=i586-pc
+		;;
+	pentiumpro | p6 | 6x86 | athlon | athlon_*)
+		basic_machine=i686-pc
+		;;
+	pentiumii | pentium2 | pentiumiii | pentium3)
+		basic_machine=i686-pc
+		;;
+	pentium4)
+		basic_machine=i786-pc
+		;;
+	pentium-* | p5-* | k5-* | k6-* | nexgen-* | viac3-*)
+		basic_machine=i586-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	pentiumpro-* | p6-* | 6x86-* | athlon-*)
+		basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	pentiumii-* | pentium2-* | pentiumiii-* | pentium3-*)
+		basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	pentium4-*)
+		basic_machine=i786-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	pn)
+		basic_machine=pn-gould
+		;;
+	power)	basic_machine=power-ibm
+		;;
+	ppc)	basic_machine=powerpc-unknown
+		;;
+	ppc-*)	basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	ppcle | powerpclittle | ppc-le | powerpc-little)
+		basic_machine=powerpcle-unknown
+		;;
+	ppcle-* | powerpclittle-*)
+		basic_machine=powerpcle-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	ppc64)	basic_machine=powerpc64-unknown
+		;;
+	ppc64-*) basic_machine=powerpc64-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	ppc64le | powerpc64little | ppc64-le | powerpc64-little)
+		basic_machine=powerpc64le-unknown
+		;;
+	ppc64le-* | powerpc64little-*)
+		basic_machine=powerpc64le-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	ps2)
+		basic_machine=i386-ibm
+		;;
+	pw32)
+		basic_machine=i586-unknown
+		os=-pw32
+		;;
+	rdos)
+		basic_machine=i386-pc
+		os=-rdos
+		;;
+	rom68k)
+		basic_machine=m68k-rom68k
+		os=-coff
+		;;
+	rm[46]00)
+		basic_machine=mips-siemens
+		;;
+	rtpc | rtpc-*)
+		basic_machine=romp-ibm
+		;;
+	s390 | s390-*)
+		basic_machine=s390-ibm
+		;;
+	s390x | s390x-*)
+		basic_machine=s390x-ibm
+		;;
+	sa29200)
+		basic_machine=a29k-amd
+		os=-udi
+		;;
+	sb1)
+		basic_machine=mipsisa64sb1-unknown
+		;;
+	sb1el)
+		basic_machine=mipsisa64sb1el-unknown
+		;;
+	sde)
+		basic_machine=mipsisa32-sde
+		os=-elf
+		;;
+	sei)
+		basic_machine=mips-sei
+		os=-seiux
+		;;
+	sequent)
+		basic_machine=i386-sequent
+		;;
+	sh)
+		basic_machine=sh-hitachi
+		os=-hms
+		;;
+	sh5el)
+		basic_machine=sh5le-unknown
+		;;
+	sh64)
+		basic_machine=sh64-unknown
+		;;
+	sparclite-wrs | simso-wrs)
+		basic_machine=sparclite-wrs
+		os=-vxworks
+		;;
+	sps7)
+		basic_machine=m68k-bull
+		os=-sysv2
+		;;
+	spur)
+		basic_machine=spur-unknown
+		;;
+	st2000)
+		basic_machine=m68k-tandem
+		;;
+	stratus)
+		basic_machine=i860-stratus
+		os=-sysv4
+		;;
+	sun2)
+		basic_machine=m68000-sun
+		;;
+	sun2os3)
+		basic_machine=m68000-sun
+		os=-sunos3
+		;;
+	sun2os4)
+		basic_machine=m68000-sun
+		os=-sunos4
+		;;
+	sun3os3)
+		basic_machine=m68k-sun
+		os=-sunos3
+		;;
+	sun3os4)
+		basic_machine=m68k-sun
+		os=-sunos4
+		;;
+	sun4os3)
+		basic_machine=sparc-sun
+		os=-sunos3
+		;;
+	sun4os4)
+		basic_machine=sparc-sun
+		os=-sunos4
+		;;
+	sun4sol2)
+		basic_machine=sparc-sun
+		os=-solaris2
+		;;
+	sun3 | sun3-*)
+		basic_machine=m68k-sun
+		;;
+	sun4)
+		basic_machine=sparc-sun
+		;;
+	sun386 | sun386i | roadrunner)
+		basic_machine=i386-sun
+		;;
+	sv1)
+		basic_machine=sv1-cray
+		os=-unicos
+		;;
+	symmetry)
+		basic_machine=i386-sequent
+		os=-dynix
+		;;
+	t3e)
+		basic_machine=alphaev5-cray
+		os=-unicos
+		;;
+	t90)
+		basic_machine=t90-cray
+		os=-unicos
+		;;
+	tic54x | c54x*)
+		basic_machine=tic54x-unknown
+		os=-coff
+		;;
+	tic55x | c55x*)
+		basic_machine=tic55x-unknown
+		os=-coff
+		;;
+	tic6x | c6x*)
+		basic_machine=tic6x-unknown
+		os=-coff
+		;;
+	tile*)
+		basic_machine=tile-unknown
+		os=-linux-gnu
+		;;
+	tx39)
+		basic_machine=mipstx39-unknown
+		;;
+	tx39el)
+		basic_machine=mipstx39el-unknown
+		;;
+	toad1)
+		basic_machine=pdp10-xkl
+		os=-tops20
+		;;
+	tower | tower-32)
+		basic_machine=m68k-ncr
+		;;
+	tpf)
+		basic_machine=s390x-ibm
+		os=-tpf
+		;;
+	udi29k)
+		basic_machine=a29k-amd
+		os=-udi
+		;;
+	ultra3)
+		basic_machine=a29k-nyu
+		os=-sym1
+		;;
+	v810 | necv810)
+		basic_machine=v810-nec
+		os=-none
+		;;
+	vaxv)
+		basic_machine=vax-dec
+		os=-sysv
+		;;
+	vms)
+		basic_machine=vax-dec
+		os=-vms
+		;;
+	vpp*|vx|vx-*)
+		basic_machine=f301-fujitsu
+		;;
+	vxworks960)
+		basic_machine=i960-wrs
+		os=-vxworks
+		;;
+	vxworks68)
+		basic_machine=m68k-wrs
+		os=-vxworks
+		;;
+	vxworks29k)
+		basic_machine=a29k-wrs
+		os=-vxworks
+		;;
+	w65*)
+		basic_machine=w65-wdc
+		os=-none
+		;;
+	w89k-*)
+		basic_machine=hppa1.1-winbond
+		os=-proelf
+		;;
+	xbox)
+		basic_machine=i686-pc
+		os=-mingw32
+		;;
+	xps | xps100)
+		basic_machine=xps100-honeywell
+		;;
+	ymp)
+		basic_machine=ymp-cray
+		os=-unicos
+		;;
+	z8k-*-coff)
+		basic_machine=z8k-unknown
+		os=-sim
+		;;
+	none)
+		basic_machine=none-none
+		os=-none
+		;;
+
+# Here we handle the default manufacturer of certain CPU types.  It is in
+# some cases the only manufacturer, in others, it is the most popular.
+	w89k)
+		basic_machine=hppa1.1-winbond
+		;;
+	op50n)
+		basic_machine=hppa1.1-oki
+		;;
+	op60c)
+		basic_machine=hppa1.1-oki
+		;;
+	romp)
+		basic_machine=romp-ibm
+		;;
+	mmix)
+		basic_machine=mmix-knuth
+		;;
+	rs6000)
+		basic_machine=rs6000-ibm
+		;;
+	vax)
+		basic_machine=vax-dec
+		;;
+	pdp10)
+		# there are many clones, so DEC is not a safe bet
+		basic_machine=pdp10-unknown
+		;;
+	pdp11)
+		basic_machine=pdp11-dec
+		;;
+	we32k)
+		basic_machine=we32k-att
+		;;
+	sh[1234] | sh[24]a | sh[34]eb | sh[1234]le | sh[23]ele)
+		basic_machine=sh-unknown
+		;;
+	sparc | sparcv8 | sparcv9 | sparcv9b | sparcv9v)
+		basic_machine=sparc-sun
+		;;
+	cydra)
+		basic_machine=cydra-cydrome
+		;;
+	orion)
+		basic_machine=orion-highlevel
+		;;
+	orion105)
+		basic_machine=clipper-highlevel
+		;;
+	mac | mpw | mac-mpw)
+		basic_machine=m68k-apple
+		;;
+	pmac | pmac-mpw)
+		basic_machine=powerpc-apple
+		;;
+	*-unknown)
+		# Make sure to match an already-canonicalized machine name.
+		;;
+	*)
+		echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2
+		exit 1
+		;;
+esac
+
+# Here we canonicalize certain aliases for manufacturers.
+case $basic_machine in
+	*-digital*)
+		basic_machine=`echo $basic_machine | sed 's/digital.*/dec/'`
+		;;
+	*-commodore*)
+		basic_machine=`echo $basic_machine | sed 's/commodore.*/cbm/'`
+		;;
+	*)
+		;;
+esac
+
+# Decode manufacturer-specific aliases for certain operating systems.
+
+if [ x"$os" != x"" ]
+then
+case $os in
+        # First match some system type aliases
+        # that might get confused with valid system types.
+	# -solaris* is a basic system type, with this one exception.
+	-solaris1 | -solaris1.*)
+		os=`echo $os | sed -e 's|solaris1|sunos4|'`
+		;;
+	-solaris)
+		os=-solaris2
+		;;
+	-svr4*)
+		os=-sysv4
+		;;
+	-unixware*)
+		os=-sysv4.2uw
+		;;
+	-gnu/linux*)
+		os=`echo $os | sed -e 's|gnu/linux|linux-gnu|'`
+		;;
+	# First accept the basic system types.
+	# The portable systems comes first.
+	# Each alternative MUST END IN A *, to match a version number.
+	# -sysv* is not here because it comes later, after sysvr4.
+	-gnu* | -bsd* | -mach* | -minix* | -genix* | -ultrix* | -irix* \
+	      | -*vms* | -sco* | -esix* | -isc* | -aix* | -sunos | -sunos[34]*\
+	      | -hpux* | -unos* | -osf* | -luna* | -dgux* | -solaris* | -sym* \
+	      | -amigaos* | -amigados* | -msdos* | -newsos* | -unicos* | -aof* \
+	      | -aos* \
+	      | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \
+	      | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \
+	      | -hiux* | -386bsd* | -knetbsd* | -mirbsd* | -netbsd* \
+	      | -openbsd* | -solidbsd* \
+	      | -ekkobsd* | -kfreebsd* | -freebsd* | -riscix* | -lynxos* \
+	      | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \
+	      | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \
+	      | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \
+	      | -chorusos* | -chorusrdb* \
+	      | -cygwin* | -pe* | -psos* | -moss* | -proelf* | -rtems* \
+	      | -mingw32* | -linux-gnu* | -linux-newlib* | -linux-uclibc* \
+	      | -uxpv* | -beos* | -mpeix* | -udk* \
+	      | -interix* | -uwin* | -mks* | -rhapsody* | -darwin* | -opened* \
+	      | -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \
+	      | -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \
+	      | -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \
+	      | -morphos* | -superux* | -rtmk* | -rtmk-nova* | -windiss* \
+	      | -powermax* | -dnix* | -nx6 | -nx7 | -sei* | -dragonfly* \
+	      | -skyos* | -haiku* | -rdos* | -toppers* | -drops* | -irx*)
+	# Remember, each alternative MUST END IN *, to match a version number.
+		;;
+	-qnx*)
+		case $basic_machine in
+		    x86-* | i*86-*)
+			;;
+		    *)
+			os=-nto$os
+			;;
+		esac
+		;;
+	-nto-qnx*)
+		;;
+	-nto*)
+		os=`echo $os | sed -e 's|nto|nto-qnx|'`
+		;;
+	-sim | -es1800* | -hms* | -xray | -os68k* | -none* | -v88r* \
+	      | -windows* | -osx | -abug | -netware* | -os9* | -beos* | -haiku* \
+	      | -macos* | -mpw* | -magic* | -mmixware* | -mon960* | -lnews*)
+		;;
+	-mac*)
+		os=`echo $os | sed -e 's|mac|macos|'`
+		;;
+	-linux-dietlibc)
+		os=-linux-dietlibc
+		;;
+	-linux*)
+		os=`echo $os | sed -e 's|linux|linux-gnu|'`
+		;;
+	-sunos5*)
+		os=`echo $os | sed -e 's|sunos5|solaris2|'`
+		;;
+	-sunos6*)
+		os=`echo $os | sed -e 's|sunos6|solaris3|'`
+		;;
+	-opened*)
+		os=-openedition
+		;;
+        -os400*)
+		os=-os400
+		;;
+	-wince*)
+		os=-wince
+		;;
+	-osfrose*)
+		os=-osfrose
+		;;
+	-osf*)
+		os=-osf
+		;;
+	-utek*)
+		os=-bsd
+		;;
+	-dynix*)
+		os=-bsd
+		;;
+	-acis*)
+		os=-aos
+		;;
+	-atheos*)
+		os=-atheos
+		;;
+	-syllable*)
+		os=-syllable
+		;;
+	-386bsd)
+		os=-bsd
+		;;
+	-ctix* | -uts*)
+		os=-sysv
+		;;
+	-nova*)
+		os=-rtmk-nova
+		;;
+	-ns2 )
+		os=-nextstep2
+		;;
+	-nsk*)
+		os=-nsk
+		;;
+	# Preserve the version number of sinix5.
+	-sinix5.*)
+		os=`echo $os | sed -e 's|sinix|sysv|'`
+		;;
+	-sinix*)
+		os=-sysv4
+		;;
+        -tpf*)
+		os=-tpf
+		;;
+	-triton*)
+		os=-sysv3
+		;;
+	-oss*)
+		os=-sysv3
+		;;
+	-svr4)
+		os=-sysv4
+		;;
+	-svr3)
+		os=-sysv3
+		;;
+	-sysvr4)
+		os=-sysv4
+		;;
+	# This must come after -sysvr4.
+	-sysv*)
+		;;
+	-ose*)
+		os=-ose
+		;;
+	-es1800*)
+		os=-ose
+		;;
+	-xenix)
+		os=-xenix
+		;;
+	-*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*)
+		os=-mint
+		;;
+	-aros*)
+		os=-aros
+		;;
+	-kaos*)
+		os=-kaos
+		;;
+	-zvmoe)
+		os=-zvmoe
+		;;
+	-none)
+		;;
+	*)
+		# Get rid of the `-' at the beginning of $os.
+		os=`echo $os | sed 's/[^-]*-//'`
+		echo Invalid configuration \`$1\': system \`$os\' not recognized 1>&2
+		exit 1
+		;;
+esac
+else
+
+# Here we handle the default operating systems that come with various machines.
+# The value should be what the vendor currently ships out the door with their
+# machine or put another way, the most popular os provided with the machine.
+
+# Note that if you're going to try to match "-MANUFACTURER" here (say,
+# "-sun"), then you have to tell the case statement up towards the top
+# that MANUFACTURER isn't an operating system.  Otherwise, code above
+# will signal an error saying that MANUFACTURER isn't an operating
+# system, and we'll never get to this point.
+
+case $basic_machine in
+        score-*)
+		os=-elf
+		;;
+        spu-*)
+		os=-elf
+		;;
+	*-acorn)
+		os=-riscix1.2
+		;;
+	arm*-rebel)
+		os=-linux
+		;;
+	arm*-semi)
+		os=-aout
+		;;
+        c4x-* | tic4x-*)
+        	os=-coff
+		;;
+	# This must come before the *-dec entry.
+	pdp10-*)
+		os=-tops20
+		;;
+	pdp11-*)
+		os=-none
+		;;
+	*-dec | vax-*)
+		os=-ultrix4.2
+		;;
+	m68*-apollo)
+		os=-domain
+		;;
+	i386-sun)
+		os=-sunos4.0.2
+		;;
+	m68000-sun)
+		os=-sunos3
+		# This also exists in the configure program, but was not the
+		# default.
+		# os=-sunos4
+		;;
+	m68*-cisco)
+		os=-aout
+		;;
+        mep-*)
+		os=-elf
+		;;
+	mips*-cisco)
+		os=-elf
+		;;
+	mips*-*)
+		os=-elf
+		;;
+	or32-*)
+		os=-coff
+		;;
+	*-tti)	# must be before sparc entry or we get the wrong os.
+		os=-sysv3
+		;;
+	sparc-* | *-sun)
+		os=-sunos4.1.1
+		;;
+	*-be)
+		os=-beos
+		;;
+	*-haiku)
+		os=-haiku
+		;;
+	*-ibm)
+		os=-aix
+		;;
+    	*-knuth)
+		os=-mmixware
+		;;
+	*-wec)
+		os=-proelf
+		;;
+	*-winbond)
+		os=-proelf
+		;;
+	*-oki)
+		os=-proelf
+		;;
+	*-hp)
+		os=-hpux
+		;;
+	*-hitachi)
+		os=-hiux
+		;;
+	i860-* | *-att | *-ncr | *-altos | *-motorola | *-convergent)
+		os=-sysv
+		;;
+	*-cbm)
+		os=-amigaos
+		;;
+	*-dg)
+		os=-dgux
+		;;
+	*-dolphin)
+		os=-sysv3
+		;;
+	m68k-ccur)
+		os=-rtu
+		;;
+	m88k-omron*)
+		os=-luna
+		;;
+	*-next )
+		os=-nextstep
+		;;
+	*-sequent)
+		os=-ptx
+		;;
+	*-crds)
+		os=-unos
+		;;
+	*-ns)
+		os=-genix
+		;;
+	i370-*)
+		os=-mvs
+		;;
+	*-next)
+		os=-nextstep3
+		;;
+	*-gould)
+		os=-sysv
+		;;
+	*-highlevel)
+		os=-bsd
+		;;
+	*-encore)
+		os=-bsd
+		;;
+	*-sgi)
+		os=-irix
+		;;
+	*-siemens)
+		os=-sysv4
+		;;
+	*-masscomp)
+		os=-rtu
+		;;
+	f30[01]-fujitsu | f700-fujitsu)
+		os=-uxpv
+		;;
+	*-rom68k)
+		os=-coff
+		;;
+	*-*bug)
+		os=-coff
+		;;
+	*-apple)
+		os=-macos
+		;;
+	*-atari*)
+		os=-mint
+		;;
+	*)
+		os=-none
+		;;
+esac
+fi
+
+# Here we handle the case where we know the os, and the CPU type, but not the
+# manufacturer.  We pick the logical manufacturer.
+vendor=unknown
+case $basic_machine in
+	*-unknown)
+		case $os in
+			-riscix*)
+				vendor=acorn
+				;;
+			-sunos*)
+				vendor=sun
+				;;
+			-aix*)
+				vendor=ibm
+				;;
+			-beos*)
+				vendor=be
+				;;
+			-hpux*)
+				vendor=hp
+				;;
+			-mpeix*)
+				vendor=hp
+				;;
+			-hiux*)
+				vendor=hitachi
+				;;
+			-unos*)
+				vendor=crds
+				;;
+			-dgux*)
+				vendor=dg
+				;;
+			-luna*)
+				vendor=omron
+				;;
+			-genix*)
+				vendor=ns
+				;;
+			-mvs* | -opened*)
+				vendor=ibm
+				;;
+			-os400*)
+				vendor=ibm
+				;;
+			-ptx*)
+				vendor=sequent
+				;;
+			-tpf*)
+				vendor=ibm
+				;;
+			-vxsim* | -vxworks* | -windiss*)
+				vendor=wrs
+				;;
+			-aux*)
+				vendor=apple
+				;;
+			-hms*)
+				vendor=hitachi
+				;;
+			-mpw* | -macos*)
+				vendor=apple
+				;;
+			-*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*)
+				vendor=atari
+				;;
+			-vos*)
+				vendor=stratus
+				;;
+		esac
+		basic_machine=`echo $basic_machine | sed "s/unknown/$vendor/"`
+		;;
+esac
+
+echo $basic_machine$os
+exit
+
+# Local variables:
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "timestamp='"
+# time-stamp-format: "%:y-%02m-%02d"
+# time-stamp-end: "'"
+# End:
diff -Nru /tmp/bxdedfLB6u/uriparser-0.6.0/build-aux/depcomp /tmp/fLjZ2dz9P3/uriparser-0.7.4/build-aux/depcomp
--- uriparser-0.6.0/build-aux/depcomp	1970-01-01 01:00:00.000000000 +0100
+++ uriparser-0.7.4/build-aux/depcomp	2008-12-23 02:31:18.000000000 +0000
@@ -0,0 +1,589 @@
+#! /bin/sh
+# depcomp - compile a program generating dependencies as side-effects
+
+scriptversion=2007-03-29.01
+
+# Copyright (C) 1999, 2000, 2003, 2004, 2005, 2006, 2007 Free Software
+# Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+# 02110-1301, USA.
+
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+# Originally written by Alexandre Oliva <oliva@dcc.unicamp.br>.
+
+case $1 in
+  '')
+     echo "$0: No command.  Try \`$0 --help' for more information." 1>&2
+     exit 1;
+     ;;
+  -h | --h*)
+    cat <<\EOF
+Usage: depcomp [--help] [--version] PROGRAM [ARGS]
+
+Run PROGRAMS ARGS to compile a file, generating dependencies
+as side-effects.
+
+Environment variables:
+  depmode     Dependency tracking mode.
+  source      Source file read by `PROGRAMS ARGS'.
+  object      Object file output by `PROGRAMS ARGS'.
+  DEPDIR      directory where to store dependencies.
+  depfile     Dependency file to output.
+  tmpdepfile  Temporary file to use when outputing dependencies.
+  libtool     Whether libtool is used (yes/no).
+
+Report bugs to <bug-automake@gnu.org>.
+EOF
+    exit $?
+    ;;
+  -v | --v*)
+    echo "depcomp $scriptversion"
+    exit $?
+    ;;
+esac
+
+if test -z "$depmode" || test -z "$source" || test -z "$object"; then
+  echo "depcomp: Variables source, object and depmode must be set" 1>&2
+  exit 1
+fi
+
+# Dependencies for sub/bar.o or sub/bar.obj go into sub/.deps/bar.Po.
+depfile=${depfile-`echo "$object" |
+  sed 's|[^\\/]*$|'${DEPDIR-.deps}'/&|;s|\.\([^.]*\)$|.P\1|;s|Pobj$|Po|'`}
+tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`}
+
+rm -f "$tmpdepfile"
+
+# Some modes work just like other modes, but use different flags.  We
+# parameterize here, but still list the modes in the big case below,
+# to make depend.m4 easier to write.  Note that we *cannot* use a case
+# here, because this file can only contain one case statement.
+if test "$depmode" = hp; then
+  # HP compiler uses -M and no extra arg.
+  gccflag=-M
+  depmode=gcc
+fi
+
+if test "$depmode" = dashXmstdout; then
+   # This is just like dashmstdout with a different argument.
+   dashmflag=-xM
+   depmode=dashmstdout
+fi
+
+case "$depmode" in
+gcc3)
+## gcc 3 implements dependency tracking that does exactly what
+## we want.  Yay!  Note: for some reason libtool 1.4 doesn't like
+## it if -MD -MP comes after the -MF stuff.  Hmm.
+## Unfortunately, FreeBSD c89 acceptance of flags depends upon
+## the command line argument order; so add the flags where they
+## appear in depend2.am.  Note that the slowdown incurred here
+## affects only configure: in makefiles, %FASTDEP% shortcuts this.
+  for arg
+  do
+    case $arg in
+    -c) set fnord "$@" -MT "$object" -MD -MP -MF "$tmpdepfile" "$arg" ;;
+    *)  set fnord "$@" "$arg" ;;
+    esac
+    shift # fnord
+    shift # $arg
+  done
+  "$@"
+  stat=$?
+  if test $stat -eq 0; then :
+  else
+    rm -f "$tmpdepfile"
+    exit $stat
+  fi
+  mv "$tmpdepfile" "$depfile"
+  ;;
+
+gcc)
+## There are various ways to get dependency output from gcc.  Here's
+## why we pick this rather obscure method:
+## - Don't want to use -MD because we'd like the dependencies to end
+##   up in a subdir.  Having to rename by hand is ugly.
+##   (We might end up doing this anyway to support other compilers.)
+## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like
+##   -MM, not -M (despite what the docs say).
+## - Using -M directly means running the compiler twice (even worse
+##   than renaming).
+  if test -z "$gccflag"; then
+    gccflag=-MD,
+  fi
+  "$@" -Wp,"$gccflag$tmpdepfile"
+  stat=$?
+  if test $stat -eq 0; then :
+  else
+    rm -f "$tmpdepfile"
+    exit $stat
+  fi
+  rm -f "$depfile"
+  echo "$object : \\" > "$depfile"
+  alpha=ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz
+## The second -e expression handles DOS-style file names with drive letters.
+  sed -e 's/^[^:]*: / /' \
+      -e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile"
+## This next piece of magic avoids the `deleted header file' problem.
+## The problem is that when a header file which appears in a .P file
+## is deleted, the dependency causes make to die (because there is
+## typically no way to rebuild the header).  We avoid this by adding
+## dummy dependencies for each header file.  Too bad gcc doesn't do
+## this for us directly.
+  tr ' ' '
+' < "$tmpdepfile" |
+## Some versions of gcc put a space before the `:'.  On the theory
+## that the space means something, we add a space to the output as
+## well.
+## Some versions of the HPUX 10.20 sed can't process this invocation
+## correctly.  Breaking it into two sed invocations is a workaround.
+    sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
+  rm -f "$tmpdepfile"
+  ;;
+
+hp)
+  # This case exists only to let depend.m4 do its work.  It works by
+  # looking at the text of this script.  This case will never be run,
+  # since it is checked for above.
+  exit 1
+  ;;
+
+sgi)
+  if test "$libtool" = yes; then
+    "$@" "-Wp,-MDupdate,$tmpdepfile"
+  else
+    "$@" -MDupdate "$tmpdepfile"
+  fi
+  stat=$?
+  if test $stat -eq 0; then :
+  else
+    rm -f "$tmpdepfile"
+    exit $stat
+  fi
+  rm -f "$depfile"
+
+  if test -f "$tmpdepfile"; then  # yes, the sourcefile depend on other files
+    echo "$object : \\" > "$depfile"
+
+    # Clip off the initial element (the dependent).  Don't try to be
+    # clever and replace this with sed code, as IRIX sed won't handle
+    # lines with more than a fixed number of characters (4096 in
+    # IRIX 6.2 sed, 8192 in IRIX 6.5).  We also remove comment lines;
+    # the IRIX cc adds comments like `#:fec' to the end of the
+    # dependency line.
+    tr ' ' '
+' < "$tmpdepfile" \
+    | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' | \
+    tr '
+' ' ' >> $depfile
+    echo >> $depfile
+
+    # The second pass generates a dummy entry for each header file.
+    tr ' ' '
+' < "$tmpdepfile" \
+   | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \
+   >> $depfile
+  else
+    # The sourcefile does not contain any dependencies, so just
+    # store a dummy comment line, to avoid errors with the Makefile
+    # "include basename.Plo" scheme.
+    echo "#dummy" > "$depfile"
+  fi
+  rm -f "$tmpdepfile"
+  ;;
+
+aix)
+  # The C for AIX Compiler uses -M and outputs the dependencies
+  # in a .u file.  In older versions, this file always lives in the
+  # current directory.  Also, the AIX compiler puts `$object:' at the
+  # start of each line; $object doesn't have directory information.
+  # Version 6 uses the directory in both cases.
+  dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
+  test "x$dir" = "x$object" && dir=
+  base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
+  if test "$libtool" = yes; then
+    tmpdepfile1=$dir$base.u
+    tmpdepfile2=$base.u
+    tmpdepfile3=$dir.libs/$base.u
+    "$@" -Wc,-M
+  else
+    tmpdepfile1=$dir$base.u
+    tmpdepfile2=$dir$base.u
+    tmpdepfile3=$dir$base.u
+    "$@" -M
+  fi
+  stat=$?
+
+  if test $stat -eq 0; then :
+  else
+    rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
+    exit $stat
+  fi
+
+  for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
+  do
+    test -f "$tmpdepfile" && break
+  done
+  if test -f "$tmpdepfile"; then
+    # Each line is of the form `foo.o: dependent.h'.
+    # Do two passes, one to just change these to
+    # `$object: dependent.h' and one to simply `dependent.h:'.
+    sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile"
+    # That's a tab and a space in the [].
+    sed -e 's,^.*\.[a-z]*:[	 ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile"
+  else
+    # The sourcefile does not contain any dependencies, so just
+    # store a dummy comment line, to avoid errors with the Makefile
+    # "include basename.Plo" scheme.
+    echo "#dummy" > "$depfile"
+  fi
+  rm -f "$tmpdepfile"
+  ;;
+
+icc)
+  # Intel's C compiler understands `-MD -MF file'.  However on
+  #    icc -MD -MF foo.d -c -o sub/foo.o sub/foo.c
+  # ICC 7.0 will fill foo.d with something like
+  #    foo.o: sub/foo.c
+  #    foo.o: sub/foo.h
+  # which is wrong.  We want:
+  #    sub/foo.o: sub/foo.c
+  #    sub/foo.o: sub/foo.h
+  #    sub/foo.c:
+  #    sub/foo.h:
+  # ICC 7.1 will output
+  #    foo.o: sub/foo.c sub/foo.h
+  # and will wrap long lines using \ :
+  #    foo.o: sub/foo.c ... \
+  #     sub/foo.h ... \
+  #     ...
+
+  "$@" -MD -MF "$tmpdepfile"
+  stat=$?
+  if test $stat -eq 0; then :
+  else
+    rm -f "$tmpdepfile"
+    exit $stat
+  fi
+  rm -f "$depfile"
+  # Each line is of the form `foo.o: dependent.h',
+  # or `foo.o: dep1.h dep2.h \', or ` dep3.h dep4.h \'.
+  # Do two passes, one to just change these to
+  # `$object: dependent.h' and one to simply `dependent.h:'.
+  sed "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile"
+  # Some versions of the HPUX 10.20 sed can't process this invocation
+  # correctly.  Breaking it into two sed invocations is a workaround.
+  sed 's,^[^:]*: \(.*\)$,\1,;s/^\\$//;/^$/d;/:$/d' < "$tmpdepfile" |
+    sed -e 's/$/ :/' >> "$depfile"
+  rm -f "$tmpdepfile"
+  ;;
+
+hp2)
+  # The "hp" stanza above does not work with aCC (C++) and HP's ia64
+  # compilers, which have integrated preprocessors.  The correct option
+  # to use with these is +Maked; it writes dependencies to a file named
+  # 'foo.d', which lands next to the object file, wherever that
+  # happens to be.
+  # Much of this is similar to the tru64 case; see comments there.
+  dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
+  test "x$dir" = "x$object" && dir=
+  base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
+  if test "$libtool" = yes; then
+    tmpdepfile1=$dir$base.d
+    tmpdepfile2=$dir.libs/$base.d
+    "$@" -Wc,+Maked
+  else
+    tmpdepfile1=$dir$base.d
+    tmpdepfile2=$dir$base.d
+    "$@" +Maked
+  fi
+  stat=$?
+  if test $stat -eq 0; then :
+  else
+     rm -f "$tmpdepfile1" "$tmpdepfile2"
+     exit $stat
+  fi
+
+  for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2"
+  do
+    test -f "$tmpdepfile" && break
+  done
+  if test -f "$tmpdepfile"; then
+    sed -e "s,^.*\.[a-z]*:,$object:," "$tmpdepfile" > "$depfile"
+    # Add `dependent.h:' lines.
+    sed -ne '2,${; s/^ *//; s/ \\*$//; s/$/:/; p;}' "$tmpdepfile" >> "$depfile"
+  else
+    echo "#dummy" > "$depfile"
+  fi
+  rm -f "$tmpdepfile" "$tmpdepfile2"
+  ;;
+
+tru64)
+   # The Tru64 compiler uses -MD to generate dependencies as a side
+   # effect.  `cc -MD -o foo.o ...' puts the dependencies into `foo.o.d'.
+   # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put
+   # dependencies in `foo.d' instead, so we check for that too.
+   # Subdirectories are respected.
+   dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
+   test "x$dir" = "x$object" && dir=
+   base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
+
+   if test "$libtool" = yes; then
+      # With Tru64 cc, shared objects can also be used to make a
+      # static library.  This mechanism is used in libtool 1.4 series to
+      # handle both shared and static libraries in a single compilation.
+      # With libtool 1.4, dependencies were output in $dir.libs/$base.lo.d.
+      #
+      # With libtool 1.5 this exception was removed, and libtool now
+      # generates 2 separate objects for the 2 libraries.  These two
+      # compilations output dependencies in $dir.libs/$base.o.d and
+      # in $dir$base.o.d.  We have to check for both files, because
+      # one of the two compilations can be disabled.  We should prefer
+      # $dir$base.o.d over $dir.libs/$base.o.d because the latter is
+      # automatically cleaned when .libs/ is deleted, while ignoring
+      # the former would cause a distcleancheck panic.
+      tmpdepfile1=$dir.libs/$base.lo.d   # libtool 1.4
+      tmpdepfile2=$dir$base.o.d          # libtool 1.5
+      tmpdepfile3=$dir.libs/$base.o.d    # libtool 1.5
+      tmpdepfile4=$dir.libs/$base.d      # Compaq CCC V6.2-504
+      "$@" -Wc,-MD
+   else
+      tmpdepfile1=$dir$base.o.d
+      tmpdepfile2=$dir$base.d
+      tmpdepfile3=$dir$base.d
+      tmpdepfile4=$dir$base.d
+      "$@" -MD
+   fi
+
+   stat=$?
+   if test $stat -eq 0; then :
+   else
+      rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4"
+      exit $stat
+   fi
+
+   for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4"
+   do
+     test -f "$tmpdepfile" && break
+   done
+   if test -f "$tmpdepfile"; then
+      sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile"
+      # That's a tab and a space in the [].
+      sed -e 's,^.*\.[a-z]*:[	 ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile"
+   else
+      echo "#dummy" > "$depfile"
+   fi
+   rm -f "$tmpdepfile"
+   ;;
+
+#nosideeffect)
+  # This comment above is used by automake to tell side-effect
+  # dependency tracking mechanisms from slower ones.
+
+dashmstdout)
+  # Important note: in order to support this mode, a compiler *must*
+  # always write the preprocessed file to stdout, regardless of -o.
+  "$@" || exit $?
+
+  # Remove the call to Libtool.
+  if test "$libtool" = yes; then
+    while test $1 != '--mode=compile'; do
+      shift
+    done
+    shift
+  fi
+
+  # Remove `-o $object'.
+  IFS=" "
+  for arg
+  do
+    case $arg in
+    -o)
+      shift
+      ;;
+    $object)
+      shift
+      ;;
+    *)
+      set fnord "$@" "$arg"
+      shift # fnord
+      shift # $arg
+      ;;
+    esac
+  done
+
+  test -z "$dashmflag" && dashmflag=-M
+  # Require at least two characters before searching for `:'
+  # in the target name.  This is to cope with DOS-style filenames:
+  # a dependency such as `c:/foo/bar' could be seen as target `c' otherwise.
+  "$@" $dashmflag |
+    sed 's:^[  ]*[^: ][^:][^:]*\:[    ]*:'"$object"'\: :' > "$tmpdepfile"
+  rm -f "$depfile"
+  cat < "$tmpdepfile" > "$depfile"
+  tr ' ' '
+' < "$tmpdepfile" | \
+## Some versions of the HPUX 10.20 sed can't process this invocation
+## correctly.  Breaking it into two sed invocations is a workaround.
+    sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
+  rm -f "$tmpdepfile"
+  ;;
+
+dashXmstdout)
+  # This case only exists to satisfy depend.m4.  It is never actually
+  # run, as this mode is specially recognized in the preamble.
+  exit 1
+  ;;
+
+makedepend)
+  "$@" || exit $?
+  # Remove any Libtool call
+  if test "$libtool" = yes; then
+    while test $1 != '--mode=compile'; do
+      shift
+    done
+    shift
+  fi
+  # X makedepend
+  shift
+  cleared=no
+  for arg in "$@"; do
+    case $cleared in
+    no)
+      set ""; shift
+      cleared=yes ;;
+    esac
+    case "$arg" in
+    -D*|-I*)
+      set fnord "$@" "$arg"; shift ;;
+    # Strip any option that makedepend may not understand.  Remove
+    # the object too, otherwise makedepend will parse it as a source file.
+    -*|$object)
+      ;;
+    *)
+      set fnord "$@" "$arg"; shift ;;
+    esac
+  done
+  obj_suffix="`echo $object | sed 's/^.*\././'`"
+  touch "$tmpdepfile"
+  ${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@"
+  rm -f "$depfile"
+  cat < "$tmpdepfile" > "$depfile"
+  sed '1,2d' "$tmpdepfile" | tr ' ' '
+' | \
+## Some versions of the HPUX 10.20 sed can't process this invocation
+## correctly.  Breaking it into two sed invocations is a workaround.
+    sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
+  rm -f "$tmpdepfile" "$tmpdepfile".bak
+  ;;
+
+cpp)
+  # Important note: in order to support this mode, a compiler *must*
+  # always write the preprocessed file to stdout.
+  "$@" || exit $?
+
+  # Remove the call to Libtool.
+  if test "$libtool" = yes; then
+    while test $1 != '--mode=compile'; do
+      shift
+    done
+    shift
+  fi
+
+  # Remove `-o $object'.
+  IFS=" "
+  for arg
+  do
+    case $arg in
+    -o)
+      shift
+      ;;
+    $object)
+      shift
+      ;;
+    *)
+      set fnord "$@" "$arg"
+      shift # fnord
+      shift # $arg
+      ;;
+    esac
+  done
+
+  "$@" -E |
+    sed -n -e '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \
+       -e '/^#line [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' |
+    sed '$ s: \\$::' > "$tmpdepfile"
+  rm -f "$depfile"
+  echo "$object : \\" > "$depfile"
+  cat < "$tmpdepfile" >> "$depfile"
+  sed < "$tmpdepfile" '/^$/d;s/^ //;s/ \\$//;s/$/ :/' >> "$depfile"
+  rm -f "$tmpdepfile"
+  ;;
+
+msvisualcpp)
+  # Important note: in order to support this mode, a compiler *must*
+  # always write the preprocessed file to stdout, regardless of -o,
+  # because we must use -o when running libtool.
+  "$@" || exit $?
+  IFS=" "
+  for arg
+  do
+    case "$arg" in
+    "-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI")
+	set fnord "$@"
+	shift
+	shift
+	;;
+    *)
+	set fnord "$@" "$arg"
+	shift
+	shift
+	;;
+    esac
+  done
+  "$@" -E |
+  sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::echo "`cygpath -u \\"\1\\"`":p' | sort | uniq > "$tmpdepfile"
+  rm -f "$depfile"
+  echo "$object : \\" > "$depfile"
+  . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s::	\1 \\:p' >> "$depfile"
+  echo "	" >> "$depfile"
+  . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s::\1\::p' >> "$depfile"
+  rm -f "$tmpdepfile"
+  ;;
+
+none)
+  exec "$@"
+  ;;
+
+*)
+  echo "Unknown depmode $depmode" 1>&2
+  exit 1
+  ;;
+esac
+
+exit 0
+
+# Local Variables:
+# mode: shell-script
+# sh-indentation: 2
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-end: "$"
+# End:
diff -Nru /tmp/bxdedfLB6u/uriparser-0.6.0/build-aux/install-sh /tmp/fLjZ2dz9P3/uriparser-0.7.4/build-aux/install-sh
--- uriparser-0.6.0/build-aux/install-sh	1970-01-01 01:00:00.000000000 +0100
+++ uriparser-0.7.4/build-aux/install-sh	2008-12-23 02:31:18.000000000 +0000
@@ -0,0 +1,519 @@
+#!/bin/sh
+# install - install a program, script, or datafile
+
+scriptversion=2006-12-25.00
+
+# This originates from X11R5 (mit/util/scripts/install.sh), which was
+# later released in X11R6 (xc/config/util/install.sh) with the
+# following copyright and license.
+#
+# Copyright (C) 1994 X Consortium
+#
+# Permission is hereby granted, free of charge, to any person obtaining a copy
+# of this software and associated documentation files (the "Software"), to
+# deal in the Software without restriction, including without limitation the
+# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
+# sell copies of the Software, and to permit persons to whom the Software is
+# furnished to do so, subject to the following conditions:
+#
+# The above copyright notice and this permission notice shall be included in
+# all copies or substantial portions of the Software.
+#
+# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL THE
+# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
+# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC-
+# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+#
+# Except as contained in this notice, the name of the X Consortium shall not
+# be used in advertising or otherwise to promote the sale, use or other deal-
+# ings in this Software without prior written authorization from the X Consor-
+# tium.
+#
+#
+# FSF changes to this file are in the public domain.
+#
+# Calling this script install-sh is preferred over install.sh, to prevent
+# `make' implicit rules from creating a file called install from it
+# when there is no Makefile.
+#
+# This script is compatible with the BSD install script, but was written
+# from scratch.
+
+nl='
+'
+IFS=" ""	$nl"
+
+# set DOITPROG to echo to test this script
+
+# Don't use :- since 4.3BSD and earlier shells don't like it.
+doit=${DOITPROG-}
+if test -z "$doit"; then
+  doit_exec=exec
+else
+  doit_exec=$doit
+fi
+
+# Put in absolute file names if you don't have them in your path;
+# or use environment vars.
+
+chgrpprog=${CHGRPPROG-chgrp}
+chmodprog=${CHMODPROG-chmod}
+chownprog=${CHOWNPROG-chown}
+cmpprog=${CMPPROG-cmp}
+cpprog=${CPPROG-cp}
+mkdirprog=${MKDIRPROG-mkdir}
+mvprog=${MVPROG-mv}
+rmprog=${RMPROG-rm}
+stripprog=${STRIPPROG-strip}
+
+posix_glob='?'
+initialize_posix_glob='
+  test "$posix_glob" != "?" || {
+    if (set -f) 2>/dev/null; then
+      posix_glob=
+    else
+      posix_glob=:
+    fi
+  }
+'
+
+posix_mkdir=
+
+# Desired mode of installed file.
+mode=0755
+
+chgrpcmd=
+chmodcmd=$chmodprog
+chowncmd=
+mvcmd=$mvprog
+rmcmd="$rmprog -f"
+stripcmd=
+
+src=
+dst=
+dir_arg=
+dst_arg=
+
+copy_on_change=false
+no_target_directory=
+
+usage="\
+Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE
+   or: $0 [OPTION]... SRCFILES... DIRECTORY
+   or: $0 [OPTION]... -t DIRECTORY SRCFILES...
+   or: $0 [OPTION]... -d DIRECTORIES...
+
+In the 1st form, copy SRCFILE to DSTFILE.
+In the 2nd and 3rd, copy all SRCFILES to DIRECTORY.
+In the 4th, create DIRECTORIES.
+
+Options:
+     --help     display this help and exit.
+     --version  display version info and exit.
+
+  -c            (ignored)
+  -C            install only if different (preserve the last data modification time)
+  -d            create directories instead of installing files.
+  -g GROUP      $chgrpprog installed files to GROUP.
+  -m MODE       $chmodprog installed files to MODE.
+  -o USER       $chownprog installed files to USER.
+  -s            $stripprog installed files.
+  -t DIRECTORY  install into DIRECTORY.
+  -T            report an error if DSTFILE is a directory.
+
+Environment variables override the default commands:
+  CHGRPPROG CHMODPROG CHOWNPROG CMPPROG CPPROG MKDIRPROG MVPROG
+  RMPROG STRIPPROG
+"
+
+while test $# -ne 0; do
+  case $1 in
+    -c) ;;
+
+    -C) copy_on_change=true;;
+
+    -d) dir_arg=true;;
+
+    -g) chgrpcmd="$chgrpprog $2"
+	shift;;
+
+    --help) echo "$usage"; exit $?;;
+
+    -m) mode=$2
+	case $mode in
+	  *' '* | *'	'* | *'
+'*	  | *'*'* | *'?'* | *'['*)
+	    echo "$0: invalid mode: $mode" >&2
+	    exit 1;;
+	esac
+	shift;;
+
+    -o) chowncmd="$chownprog $2"
+	shift;;
+
+    -s) stripcmd=$stripprog;;
+
+    -t) dst_arg=$2
+	shift;;
+
+    -T) no_target_directory=true;;
+
+    --version) echo "$0 $scriptversion"; exit $?;;
+
+    --)	shift
+	break;;
+
+    -*)	echo "$0: invalid option: $1" >&2
+	exit 1;;
+
+    *)  break;;
+  esac
+  shift
+done
+
+if test $# -ne 0 && test -z "$dir_arg$dst_arg"; then
+  # When -d is used, all remaining arguments are directories to create.
+  # When -t is used, the destination is already specified.
+  # Otherwise, the last argument is the destination.  Remove it from $@.
+  for arg
+  do
+    if test -n "$dst_arg"; then
+      # $@ is not empty: it contains at least $arg.
+      set fnord "$@" "$dst_arg"
+      shift # fnord
+    fi
+    shift # arg
+    dst_arg=$arg
+  done
+fi
+
+if test $# -eq 0; then
+  if test -z "$dir_arg"; then
+    echo "$0: no input file specified." >&2
+    exit 1
+  fi
+  # It's OK to call `install-sh -d' without argument.
+  # This can happen when creating conditional directories.
+  exit 0
+fi
+
+if test -z "$dir_arg"; then
+  trap '(exit $?); exit' 1 2 13 15
+
+  # Set umask so as not to create temps with too-generous modes.
+  # However, 'strip' requires both read and write access to temps.
+  case $mode in
+    # Optimize common cases.
+    *644) cp_umask=133;;
+    *755) cp_umask=22;;
+
+    *[0-7])
+      if test -z "$stripcmd"; then
+	u_plus_rw=
+      else
+	u_plus_rw='% 200'
+      fi
+      cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;;
+    *)
+      if test -z "$stripcmd"; then
+	u_plus_rw=
+      else
+	u_plus_rw=,u+rw
+      fi
+      cp_umask=$mode$u_plus_rw;;
+  esac
+fi
+
+for src
+do
+  # Protect names starting with `-'.
+  case $src in
+    -*) src=./$src;;
+  esac
+
+  if test -n "$dir_arg"; then
+    dst=$src
+    dstdir=$dst
+    test -d "$dstdir"
+    dstdir_status=$?
+  else
+
+    # Waiting for this to be detected by the "$cpprog $src $dsttmp" command
+    # might cause directories to be created, which would be especially bad
+    # if $src (and thus $dsttmp) contains '*'.
+    if test ! -f "$src" && test ! -d "$src"; then
+      echo "$0: $src does not exist." >&2
+      exit 1
+    fi
+
+    if test -z "$dst_arg"; then
+      echo "$0: no destination specified." >&2
+      exit 1
+    fi
+
+    dst=$dst_arg
+    # Protect names starting with `-'.
+    case $dst in
+      -*) dst=./$dst;;
+    esac
+
+    # If destination is a directory, append the input filename; won't work
+    # if double slashes aren't ignored.
+    if test -d "$dst"; then
+      if test -n "$no_target_directory"; then
+	echo "$0: $dst_arg: Is a directory" >&2
+	exit 1
+      fi
+      dstdir=$dst
+      dst=$dstdir/`basename "$src"`
+      dstdir_status=0
+    else
+      # Prefer dirname, but fall back on a substitute if dirname fails.
+      dstdir=`
+	(dirname "$dst") 2>/dev/null ||
+	expr X"$dst" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	     X"$dst" : 'X\(//\)[^/]' \| \
+	     X"$dst" : 'X\(//\)$' \| \
+	     X"$dst" : 'X\(/\)' \| . 2>/dev/null ||
+	echo X"$dst" |
+	    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+		   s//\1/
+		   q
+		 }
+		 /^X\(\/\/\)[^/].*/{
+		   s//\1/
+		   q
+		 }
+		 /^X\(\/\/\)$/{
+		   s//\1/
+		   q
+		 }
+		 /^X\(\/\).*/{
+		   s//\1/
+		   q
+		 }
+		 s/.*/./; q'
+      `
+
+      test -d "$dstdir"
+      dstdir_status=$?
+    fi
+  fi
+
+  obsolete_mkdir_used=false
+
+  if test $dstdir_status != 0; then
+    case $posix_mkdir in
+      '')
+	# Create intermediate dirs using mode 755 as modified by the umask.
+	# This is like FreeBSD 'install' as of 1997-10-28.
+	umask=`umask`
+	case $stripcmd.$umask in
+	  # Optimize common cases.
+	  *[2367][2367]) mkdir_umask=$umask;;
+	  .*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;;
+
+	  *[0-7])
+	    mkdir_umask=`expr $umask + 22 \
+	      - $umask % 100 % 40 + $umask % 20 \
+	      - $umask % 10 % 4 + $umask % 2
+	    `;;
+	  *) mkdir_umask=$umask,go-w;;
+	esac
+
+	# With -d, create the new directory with the user-specified mode.
+	# Otherwise, rely on $mkdir_umask.
+	if test -n "$dir_arg"; then
+	  mkdir_mode=-m$mode
+	else
+	  mkdir_mode=
+	fi
+
+	posix_mkdir=false
+	case $umask in
+	  *[123567][0-7][0-7])
+	    # POSIX mkdir -p sets u+wx bits regardless of umask, which
+	    # is incompatible with FreeBSD 'install' when (umask & 300) != 0.
+	    ;;
+	  *)
+	    tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$
+	    trap 'ret=$?; rmdir "$tmpdir/d" "$tmpdir" 2>/dev/null; exit $ret' 0
+
+	    if (umask $mkdir_umask &&
+		exec $mkdirprog $mkdir_mode -p -- "$tmpdir/d") >/dev/null 2>&1
+	    then
+	      if test -z "$dir_arg" || {
+		   # Check for POSIX incompatibilities with -m.
+		   # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or
+		   # other-writeable bit of parent directory when it shouldn't.
+		   # FreeBSD 6.1 mkdir -m -p sets mode of existing directory.
+		   ls_ld_tmpdir=`ls -ld "$tmpdir"`
+		   case $ls_ld_tmpdir in
+		     d????-?r-*) different_mode=700;;
+		     d????-?--*) different_mode=755;;
+		     *) false;;
+		   esac &&
+		   $mkdirprog -m$different_mode -p -- "$tmpdir" && {
+		     ls_ld_tmpdir_1=`ls -ld "$tmpdir"`
+		     test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1"
+		   }
+		 }
+	      then posix_mkdir=:
+	      fi
+	      rmdir "$tmpdir/d" "$tmpdir"
+	    else
+	      # Remove any dirs left behind by ancient mkdir implementations.
+	      rmdir ./$mkdir_mode ./-p ./-- 2>/dev/null
+	    fi
+	    trap '' 0;;
+	esac;;
+    esac
+
+    if
+      $posix_mkdir && (
+	umask $mkdir_umask &&
+	$doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir"
+      )
+    then :
+    else
+
+      # The umask is ridiculous, or mkdir does not conform to POSIX,
+      # or it failed possibly due to a race condition.  Create the
+      # directory the slow way, step by step, checking for races as we go.
+
+      case $dstdir in
+	/*) prefix='/';;
+	-*) prefix='./';;
+	*)  prefix='';;
+      esac
+
+      eval "$initialize_posix_glob"
+
+      oIFS=$IFS
+      IFS=/
+      $posix_glob set -f
+      set fnord $dstdir
+      shift
+      $posix_glob set +f
+      IFS=$oIFS
+
+      prefixes=
+
+      for d
+      do
+	test -z "$d" && continue
+
+	prefix=$prefix$d
+	if test -d "$prefix"; then
+	  prefixes=
+	else
+	  if $posix_mkdir; then
+	    (umask=$mkdir_umask &&
+	     $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break
+	    # Don't fail if two instances are running concurrently.
+	    test -d "$prefix" || exit 1
+	  else
+	    case $prefix in
+	      *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;;
+	      *) qprefix=$prefix;;
+	    esac
+	    prefixes="$prefixes '$qprefix'"
+	  fi
+	fi
+	prefix=$prefix/
+      done
+
+      if test -n "$prefixes"; then
+	# Don't fail if two instances are running concurrently.
+	(umask $mkdir_umask &&
+	 eval "\$doit_exec \$mkdirprog $prefixes") ||
+	  test -d "$dstdir" || exit 1
+	obsolete_mkdir_used=true
+      fi
+    fi
+  fi
+
+  if test -n "$dir_arg"; then
+    { test -z "$chowncmd" || $doit $chowncmd "$dst"; } &&
+    { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } &&
+    { test "$obsolete_mkdir_used$chowncmd$chgrpcmd" = false ||
+      test -z "$chmodcmd" || $doit $chmodcmd $mode "$dst"; } || exit 1
+  else
+
+    # Make a couple of temp file names in the proper directory.
+    dsttmp=$dstdir/_inst.$$_
+    rmtmp=$dstdir/_rm.$$_
+
+    # Trap to clean up those temp files at exit.
+    trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0
+
+    # Copy the file name to the temp name.
+    (umask $cp_umask && $doit_exec $cpprog "$src" "$dsttmp") &&
+
+    # and set any options; do chmod last to preserve setuid bits.
+    #
+    # If any of these fail, we abort the whole thing.  If we want to
+    # ignore errors from any of these, just make sure not to ignore
+    # errors from the above "$doit $cpprog $src $dsttmp" command.
+    #
+    { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } &&
+    { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } &&
+    { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } &&
+    { test -z "$chmodcmd" || $doit $chmodcmd $mode "$dsttmp"; } &&
+
+    # If -C, don't bother to copy if it wouldn't change the file.
+    if $copy_on_change &&
+       old=`LC_ALL=C ls -dlL "$dst"	2>/dev/null` &&
+       new=`LC_ALL=C ls -dlL "$dsttmp"	2>/dev/null` &&
+
+       eval "$initialize_posix_glob" &&
+       $posix_glob set -f &&
+       set X $old && old=:$2:$4:$5:$6 &&
+       set X $new && new=:$2:$4:$5:$6 &&
+       $posix_glob set +f &&
+
+       test "$old" = "$new" &&
+       $cmpprog "$dst" "$dsttmp" >/dev/null 2>&1
+    then
+      rm -f "$dsttmp"
+    else
+      # Rename the file to the real destination.
+      $doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null ||
+
+      # The rename failed, perhaps because mv can't rename something else
+      # to itself, or perhaps because mv is so ancient that it does not
+      # support -f.
+      {
+	# Now remove or move aside any old file at destination location.
+	# We try this two ways since rm can't unlink itself on some
+	# systems and the destination file might be busy for other
+	# reasons.  In this case, the final cleanup might fail but the new
+	# file should still install successfully.
+	{
+	  test ! -f "$dst" ||
+	  $doit $rmcmd -f "$dst" 2>/dev/null ||
+	  { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null &&
+	    { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; }
+	  } ||
+	  { echo "$0: cannot unlink or rename $dst" >&2
+	    (exit 1); exit 1
+	  }
+	} &&
+
+	# Now rename the file to the real destination.
+	$doit $mvcmd "$dsttmp" "$dst"
+      }
+    fi || exit 1
+
+    trap '' 0
+  fi
+done
+
+# Local variables:
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-end: "$"
+# End:
diff -Nru /tmp/bxdedfLB6u/uriparser-0.6.0/build-aux/ltmain.sh /tmp/fLjZ2dz9P3/uriparser-0.7.4/build-aux/ltmain.sh
--- uriparser-0.6.0/build-aux/ltmain.sh	1970-01-01 01:00:00.000000000 +0100
+++ uriparser-0.7.4/build-aux/ltmain.sh	2008-09-11 22:39:34.000000000 +0100
@@ -0,0 +1,6975 @@
+# ltmain.sh - Provide generalized library-building support services.
+# NOTE: Changing this file will not affect anything until you rerun configure.
+#
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, 2006,
+# 2007, 2008  Free Software Foundation, Inc.
+# Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+#
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+basename="s,^.*/,,g"
+
+# Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh
+# is ksh but when the shell is invoked as "sh" and the current value of
+# the _XPG environment variable is not equal to 1 (one), the special
+# positional parameter $0, within a function call, is the name of the
+# function.
+progpath="$0"
+
+# The name of this program:
+progname=`echo "$progpath" | $SED $basename`
+modename="$progname"
+
+# Global variables:
+EXIT_SUCCESS=0
+EXIT_FAILURE=1
+
+PROGRAM=ltmain.sh
+PACKAGE=libtool
+VERSION=1.5.26
+TIMESTAMP=" (1.1220.2.493 2008/02/01 16:58:18)"
+
+# Be Bourne compatible (taken from Autoconf:_AS_BOURNE_COMPATIBLE).
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
+  emulate sh
+  NULLCMD=:
+  # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
+  # is contrary to our usage.  Disable this feature.
+  alias -g '${1+"$@"}'='"$@"'
+  setopt NO_GLOB_SUBST
+else
+  case `(set -o) 2>/dev/null` in *posix*) set -o posix;; esac
+fi
+BIN_SH=xpg4; export BIN_SH # for Tru64
+DUALCASE=1; export DUALCASE # for MKS sh
+
+# Check that we have a working $echo.
+if test "X$1" = X--no-reexec; then
+  # Discard the --no-reexec flag, and continue.
+  shift
+elif test "X$1" = X--fallback-echo; then
+  # Avoid inline document here, it may be left over
+  :
+elif test "X`($echo '\t') 2>/dev/null`" = 'X\t'; then
+  # Yippee, $echo works!
+  :
+else
+  # Restart under the correct shell, and then maybe $echo will work.
+  exec $SHELL "$progpath" --no-reexec ${1+"$@"}
+fi
+
+if test "X$1" = X--fallback-echo; then
+  # used as fallback echo
+  shift
+  cat <<EOF
+$*
+EOF
+  exit $EXIT_SUCCESS
+fi
+
+default_mode=
+help="Try \`$progname --help' for more information."
+magic="%%%MAGIC variable%%%"
+mkdir="mkdir"
+mv="mv -f"
+rm="rm -f"
+
+# Sed substitution that helps us do robust quoting.  It backslashifies
+# metacharacters that are still active within double-quoted strings.
+Xsed="${SED}"' -e 1s/^X//'
+sed_quote_subst='s/\([\\`\\"$\\\\]\)/\\\1/g'
+# test EBCDIC or ASCII
+case `echo X|tr X '\101'` in
+ A) # ASCII based system
+    # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr
+  SP2NL='tr \040 \012'
+  NL2SP='tr \015\012 \040\040'
+  ;;
+ *) # EBCDIC based system
+  SP2NL='tr \100 \n'
+  NL2SP='tr \r\n \100\100'
+  ;;
+esac
+
+# NLS nuisances.
+# Only set LANG and LC_ALL to C if already set.
+# These must not be set unconditionally because not all systems understand
+# e.g. LANG=C (notably SCO).
+# We save the old values to restore during execute mode.
+lt_env=
+for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
+do
+  eval "if test \"\${$lt_var+set}\" = set; then
+	  save_$lt_var=\$$lt_var
+	  lt_env=\"$lt_var=\$$lt_var \$lt_env\"
+	  $lt_var=C
+	  export $lt_var
+	fi"
+done
+
+if test -n "$lt_env"; then
+  lt_env="env $lt_env"
+fi
+
+# Make sure IFS has a sensible default
+lt_nl='
+'
+IFS=" 	$lt_nl"
+
+if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then
+  $echo "$modename: not configured to build any kind of library" 1>&2
+  $echo "Fatal configuration error.  See the $PACKAGE docs for more information." 1>&2
+  exit $EXIT_FAILURE
+fi
+
+# Global variables.
+mode=$default_mode
+nonopt=
+prev=
+prevopt=
+run=
+show="$echo"
+show_help=
+execute_dlfiles=
+duplicate_deps=no
+preserve_args=
+lo2o="s/\\.lo\$/.${objext}/"
+o2lo="s/\\.${objext}\$/.lo/"
+extracted_archives=
+extracted_serial=0
+
+#####################################
+# Shell function definitions:
+# This seems to be the best place for them
+
+# func_mktempdir [string]
+# Make a temporary directory that won't clash with other running
+# libtool processes, and avoids race conditions if possible.  If
+# given, STRING is the basename for that directory.
+func_mktempdir ()
+{
+    my_template="${TMPDIR-/tmp}/${1-$progname}"
+
+    if test "$run" = ":"; then
+      # Return a directory name, but don't create it in dry-run mode
+      my_tmpdir="${my_template}-$$"
+    else
+
+      # If mktemp works, use that first and foremost
+      my_tmpdir=`mktemp -d "${my_template}-XXXXXXXX" 2>/dev/null`
+
+      if test ! -d "$my_tmpdir"; then
+	# Failing that, at least try and use $RANDOM to avoid a race
+	my_tmpdir="${my_template}-${RANDOM-0}$$"
+
+	save_mktempdir_umask=`umask`
+	umask 0077
+	$mkdir "$my_tmpdir"
+	umask $save_mktempdir_umask
+      fi
+
+      # If we're not in dry-run mode, bomb out on failure
+      test -d "$my_tmpdir" || {
+        $echo "cannot create temporary directory \`$my_tmpdir'" 1>&2
+	exit $EXIT_FAILURE
+      }
+    fi
+
+    $echo "X$my_tmpdir" | $Xsed
+}
+
+
+# func_win32_libid arg
+# return the library type of file 'arg'
+#
+# Need a lot of goo to handle *both* DLLs and import libs
+# Has to be a shell function in order to 'eat' the argument
+# that is supplied when $file_magic_command is called.
+func_win32_libid ()
+{
+  win32_libid_type="unknown"
+  win32_fileres=`file -L $1 2>/dev/null`
+  case $win32_fileres in
+  *ar\ archive\ import\ library*) # definitely import
+    win32_libid_type="x86 archive import"
+    ;;
+  *ar\ archive*) # could be an import, or static
+    if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null | \
+      $EGREP -e 'file format pe-i386(.*architecture: i386)?' >/dev/null ; then
+      win32_nmres=`eval $NM -f posix -A $1 | \
+	$SED -n -e '1,100{
+		/ I /{
+			s,.*,import,
+			p
+			q
+			}
+		}'`
+      case $win32_nmres in
+      import*)  win32_libid_type="x86 archive import";;
+      *)        win32_libid_type="x86 archive static";;
+      esac
+    fi
+    ;;
+  *DLL*)
+    win32_libid_type="x86 DLL"
+    ;;
+  *executable*) # but shell scripts are "executable" too...
+    case $win32_fileres in
+    *MS\ Windows\ PE\ Intel*)
+      win32_libid_type="x86 DLL"
+      ;;
+    esac
+    ;;
+  esac
+  $echo $win32_libid_type
+}
+
+
+# func_infer_tag arg
+# Infer tagged configuration to use if any are available and
+# if one wasn't chosen via the "--tag" command line option.
+# Only attempt this if the compiler in the base compile
+# command doesn't match the default compiler.
+# arg is usually of the form 'gcc ...'
+func_infer_tag ()
+{
+    if test -n "$available_tags" && test -z "$tagname"; then
+      CC_quoted=
+      for arg in $CC; do
+	case $arg in
+	  *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
+	  arg="\"$arg\""
+	  ;;
+	esac
+	CC_quoted="$CC_quoted $arg"
+      done
+      case $@ in
+      # Blanks in the command may have been stripped by the calling shell,
+      # but not from the CC environment variable when configure was run.
+      " $CC "* | "$CC "* | " `$echo $CC` "* | "`$echo $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$echo $CC_quoted` "* | "`$echo $CC_quoted` "*) ;;
+      # Blanks at the start of $base_compile will cause this to fail
+      # if we don't check for them as well.
+      *)
+	for z in $available_tags; do
+	  if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$progpath" > /dev/null; then
+	    # Evaluate the configuration.
+	    eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $progpath`"
+	    CC_quoted=
+	    for arg in $CC; do
+	    # Double-quote args containing other shell metacharacters.
+	    case $arg in
+	      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
+	      arg="\"$arg\""
+	      ;;
+	    esac
+	    CC_quoted="$CC_quoted $arg"
+	  done
+	    # user sometimes does CC=<HOST>-gcc so we need to match that to 'gcc'
+	    trimedcc=`echo ${CC} | $SED -e "s/${host}-//g"`
+	    # and sometimes libtool has CC=<HOST>-gcc but user does CC=gcc
+	    extendcc=${host}-${CC}
+	    # and sometimes libtool has CC=<OLDHOST>-gcc but user has CC=<NEWHOST>-gcc  
+	    # (Gentoo-specific hack because we always export $CHOST)
+	    mungedcc=${CHOST-${host}}-${trimedcc}
+	    case "$@ " in
+	      "cc "* | " cc "* | "${host}-cc "* | " ${host}-cc "*|\
+	      "gcc "* | " gcc "* | "${host}-gcc "* | " ${host}-gcc "*)
+	      tagname=CC
+	      break ;;
+	      "$trimedcc "* | " $trimedcc "* | "`$echo $trimedcc` "* | " `$echo $trimedcc` "*|\
+	      "$extendcc "* | " $extendcc "* | "`$echo $extendcc` "* | " `$echo $extendcc` "*|\
+	      "$mungedcc "* | " $mungedcc "* | "`$echo $mungedcc` "* | " `$echo $mungedcc` "*|\
+	      " $CC "* | "$CC "* | " `$echo $CC` "* | "`$echo $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$echo $CC_quoted` "* | "`$echo $CC_quoted` "*)
+	      # The compiler in the base compile command matches
+	      # the one in the tagged configuration.
+	      # Assume this is the tagged configuration we want.
+	      tagname=$z
+	      break
+	      ;;
+	    esac
+	  fi
+	done
+	# If $tagname still isn't set, then no tagged configuration
+	# was found and let the user know that the "--tag" command
+	# line option must be used.
+	if test -z "$tagname"; then
+	  $echo "$modename: unable to infer tagged configuration"
+	  $echo "$modename: specify a tag with \`--tag'" 1>&2
+	  exit $EXIT_FAILURE
+#        else
+#          $echo "$modename: using $tagname tagged configuration"
+	fi
+	;;
+      esac
+    fi
+}
+
+
+# func_extract_an_archive dir oldlib
+func_extract_an_archive ()
+{
+    f_ex_an_ar_dir="$1"; shift
+    f_ex_an_ar_oldlib="$1"
+
+    $show "(cd $f_ex_an_ar_dir && $AR x $f_ex_an_ar_oldlib)"
+    $run eval "(cd \$f_ex_an_ar_dir && $AR x \$f_ex_an_ar_oldlib)" || exit $?
+    if ($AR t "$f_ex_an_ar_oldlib" | sort | sort -uc >/dev/null 2>&1); then
+     :
+    else
+      $echo "$modename: ERROR: object name conflicts: $f_ex_an_ar_dir/$f_ex_an_ar_oldlib" 1>&2
+      exit $EXIT_FAILURE
+    fi
+}
+
+# func_extract_archives gentop oldlib ...
+func_extract_archives ()
+{
+    my_gentop="$1"; shift
+    my_oldlibs=${1+"$@"}
+    my_oldobjs=""
+    my_xlib=""
+    my_xabs=""
+    my_xdir=""
+    my_status=""
+
+    $show "${rm}r $my_gentop"
+    $run ${rm}r "$my_gentop"
+    $show "$mkdir $my_gentop"
+    $run $mkdir "$my_gentop"
+    my_status=$?
+    if test "$my_status" -ne 0 && test ! -d "$my_gentop"; then
+      exit $my_status
+    fi
+
+    for my_xlib in $my_oldlibs; do
+      # Extract the objects.
+      case $my_xlib in
+	[\\/]* | [A-Za-z]:[\\/]*) my_xabs="$my_xlib" ;;
+	*) my_xabs=`pwd`"/$my_xlib" ;;
+      esac
+      my_xlib=`$echo "X$my_xlib" | $Xsed -e 's%^.*/%%'`
+      my_xlib_u=$my_xlib
+      while :; do
+        case " $extracted_archives " in
+	*" $my_xlib_u "*)
+	  extracted_serial=`expr $extracted_serial + 1`
+	  my_xlib_u=lt$extracted_serial-$my_xlib ;;
+	*) break ;;
+	esac
+      done
+      extracted_archives="$extracted_archives $my_xlib_u"
+      my_xdir="$my_gentop/$my_xlib_u"
+
+      $show "${rm}r $my_xdir"
+      $run ${rm}r "$my_xdir"
+      $show "$mkdir $my_xdir"
+      $run $mkdir "$my_xdir"
+      exit_status=$?
+      if test "$exit_status" -ne 0 && test ! -d "$my_xdir"; then
+	exit $exit_status
+      fi
+      case $host in
+      *-darwin*)
+	$show "Extracting $my_xabs"
+	# Do not bother doing anything if just a dry run
+	if test -z "$run"; then
+	  darwin_orig_dir=`pwd`
+	  cd $my_xdir || exit $?
+	  darwin_archive=$my_xabs
+	  darwin_curdir=`pwd`
+	  darwin_base_archive=`$echo "X$darwin_archive" | $Xsed -e 's%^.*/%%'`
+	  darwin_arches=`lipo -info "$darwin_archive" 2>/dev/null | $EGREP Architectures 2>/dev/null`
+	  if test -n "$darwin_arches"; then 
+	    darwin_arches=`echo "$darwin_arches" | $SED -e 's/.*are://'`
+	    darwin_arch=
+	    $show "$darwin_base_archive has multiple architectures $darwin_arches"
+	    for darwin_arch in  $darwin_arches ; do
+	      mkdir -p "unfat-$$/${darwin_base_archive}-${darwin_arch}"
+	      lipo -thin $darwin_arch -output "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" "${darwin_archive}"
+	      cd "unfat-$$/${darwin_base_archive}-${darwin_arch}"
+	      func_extract_an_archive "`pwd`" "${darwin_base_archive}"
+	      cd "$darwin_curdir"
+	      $rm "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}"
+	    done # $darwin_arches
+      ## Okay now we have a bunch of thin objects, gotta fatten them up :)
+	    darwin_filelist=`find unfat-$$ -type f -name \*.o -print -o -name \*.lo -print| xargs basename | sort -u | $NL2SP`
+	    darwin_file=
+	    darwin_files=
+	    for darwin_file in $darwin_filelist; do
+	      darwin_files=`find unfat-$$ -name $darwin_file -print | $NL2SP`
+	      lipo -create -output "$darwin_file" $darwin_files
+	    done # $darwin_filelist
+	    ${rm}r unfat-$$
+	    cd "$darwin_orig_dir"
+	  else
+	    cd "$darwin_orig_dir"
+ 	    func_extract_an_archive "$my_xdir" "$my_xabs"
+	  fi # $darwin_arches
+	fi # $run
+	;;
+      *)
+        func_extract_an_archive "$my_xdir" "$my_xabs"
+        ;;
+      esac
+      my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | $NL2SP`
+    done
+    func_extract_archives_result="$my_oldobjs"
+}
+# End of Shell function definitions
+#####################################
+
+# Darwin sucks
+eval std_shrext=\"$shrext_cmds\"
+
+disable_libs=no
+
+# Parse our command line options once, thoroughly.
+while test "$#" -gt 0
+do
+  arg="$1"
+  shift
+
+  case $arg in
+  -*=*) optarg=`$echo "X$arg" | $Xsed -e 's/[-_a-zA-Z0-9]*=//'` ;;
+  *) optarg= ;;
+  esac
+
+  # If the previous option needs an argument, assign it.
+  if test -n "$prev"; then
+    case $prev in
+    execute_dlfiles)
+      execute_dlfiles="$execute_dlfiles $arg"
+      ;;
+    tag)
+      tagname="$arg"
+      preserve_args="${preserve_args}=$arg"
+
+      # Check whether tagname contains only valid characters
+      case $tagname in
+      *[!-_A-Za-z0-9,/]*)
+	$echo "$progname: invalid tag name: $tagname" 1>&2
+	exit $EXIT_FAILURE
+	;;
+      esac
+
+      case $tagname in
+      CC)
+	# Don't test for the "default" C tag, as we know, it's there, but
+	# not specially marked.
+	;;
+      *)
+	if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "$progpath" > /dev/null; then
+	  taglist="$taglist $tagname"
+	  # Evaluate the configuration.
+	  eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$tagname'$/,/^# ### END LIBTOOL TAG CONFIG: '$tagname'$/p' < $progpath`"
+	else
+	  $echo "$progname: ignoring unknown tag $tagname" 1>&2
+	fi
+	;;
+      esac
+      ;;
+    *)
+      eval "$prev=\$arg"
+      ;;
+    esac
+
+    prev=
+    prevopt=
+    continue
+  fi
+
+  # Have we seen a non-optional argument yet?
+  case $arg in
+  --help)
+    show_help=yes
+    ;;
+
+  --version)
+    echo "\
+$PROGRAM (GNU $PACKAGE) $VERSION$TIMESTAMP
+
+Copyright (C) 2008  Free Software Foundation, Inc.
+This is free software; see the source for copying conditions.  There is NO
+warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
+    exit $?
+    ;;
+
+  --config)
+    ${SED} -e '1,/^# ### BEGIN LIBTOOL CONFIG/d' -e '/^# ### END LIBTOOL CONFIG/,$d' $progpath
+    # Now print the configurations for the tags.
+    for tagname in $taglist; do
+      ${SED} -n -e "/^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$/,/^# ### END LIBTOOL TAG CONFIG: $tagname$/p" < "$progpath"
+    done
+    exit $?
+    ;;
+
+  --debug)
+    $echo "$progname: enabling shell trace mode"
+    set -x
+    preserve_args="$preserve_args $arg"
+    ;;
+
+  --dry-run | -n)
+    run=:
+    ;;
+
+  --features)
+    $echo "host: $host"
+    if test "$build_libtool_libs" = yes; then
+      $echo "enable shared libraries"
+    else
+      $echo "disable shared libraries"
+    fi
+    if test "$build_old_libs" = yes; then
+      $echo "enable static libraries"
+    else
+      $echo "disable static libraries"
+    fi
+    exit $?
+    ;;
+
+  --finish) mode="finish" ;;
+
+  --mode) prevopt="--mode" prev=mode ;;
+  --mode=*) mode="$optarg" ;;
+
+  --preserve-dup-deps) duplicate_deps="yes" ;;
+
+  --quiet | --silent)
+    show=:
+    preserve_args="$preserve_args $arg"
+    ;;
+
+  --tag)
+    prevopt="--tag"
+    prev=tag
+    preserve_args="$preserve_args --tag"
+    ;;
+  --tag=*)
+    set tag "$optarg" ${1+"$@"}
+    shift
+    prev=tag
+    preserve_args="$preserve_args --tag"
+    ;;
+
+  -dlopen)
+    prevopt="-dlopen"
+    prev=execute_dlfiles
+    ;;
+
+  -*)
+    $echo "$modename: unrecognized option \`$arg'" 1>&2
+    $echo "$help" 1>&2
+    exit $EXIT_FAILURE
+    ;;
+
+  *)
+    nonopt="$arg"
+    break
+    ;;
+  esac
+done
+
+if test -n "$prevopt"; then
+  $echo "$modename: option \`$prevopt' requires an argument" 1>&2
+  $echo "$help" 1>&2
+  exit $EXIT_FAILURE
+fi
+
+case $disable_libs in
+no) 
+  ;;
+shared)
+  build_libtool_libs=no
+  build_old_libs=yes
+  ;;
+static)
+  build_old_libs=`case $build_libtool_libs in yes) echo no;; *) echo yes;; esac`
+  ;;
+esac
+
+# If this variable is set in any of the actions, the command in it
+# will be execed at the end.  This prevents here-documents from being
+# left over by shells.
+exec_cmd=
+
+if test -z "$show_help"; then
+
+  # Infer the operation mode.
+  if test -z "$mode"; then
+    $echo "*** Warning: inferring the mode of operation is deprecated." 1>&2
+    $echo "*** Future versions of Libtool will require --mode=MODE be specified." 1>&2
+    case $nonopt in
+    *cc | cc* | *++ | gcc* | *-gcc* | g++* | xlc*)
+      mode=link
+      for arg
+      do
+	case $arg in
+	-c)
+	   mode=compile
+	   break
+	   ;;
+	esac
+      done
+      ;;
+    *db | *dbx | *strace | *truss)
+      mode=execute
+      ;;
+    *install*|cp|mv)
+      mode=install
+      ;;
+    *rm)
+      mode=uninstall
+      ;;
+    *)
+      # If we have no mode, but dlfiles were specified, then do execute mode.
+      test -n "$execute_dlfiles" && mode=execute
+
+      # Just use the default operation mode.
+      if test -z "$mode"; then
+	if test -n "$nonopt"; then
+	  $echo "$modename: warning: cannot infer operation mode from \`$nonopt'" 1>&2
+	else
+	  $echo "$modename: warning: cannot infer operation mode without MODE-ARGS" 1>&2
+	fi
+      fi
+      ;;
+    esac
+  fi
+
+  # Only execute mode is allowed to have -dlopen flags.
+  if test -n "$execute_dlfiles" && test "$mode" != execute; then
+    $echo "$modename: unrecognized option \`-dlopen'" 1>&2
+    $echo "$help" 1>&2
+    exit $EXIT_FAILURE
+  fi
+
+  # Change the help message to a mode-specific one.
+  generic_help="$help"
+  help="Try \`$modename --help --mode=$mode' for more information."
+
+  # These modes are in order of execution frequency so that they run quickly.
+  case $mode in
+  # libtool compile mode
+  compile)
+    modename="$modename: compile"
+    # Get the compilation command and the source file.
+    base_compile=
+    srcfile="$nonopt"  #  always keep a non-empty value in "srcfile"
+    suppress_opt=yes
+    suppress_output=
+    arg_mode=normal
+    libobj=
+    later=
+
+    for arg
+    do
+      case $arg_mode in
+      arg  )
+	# do not "continue".  Instead, add this to base_compile
+	lastarg="$arg"
+	arg_mode=normal
+	;;
+
+      target )
+	libobj="$arg"
+	arg_mode=normal
+	continue
+	;;
+
+      normal )
+	# Accept any command-line options.
+	case $arg in
+	-o)
+	  if test -n "$libobj" ; then
+	    $echo "$modename: you cannot specify \`-o' more than once" 1>&2
+	    exit $EXIT_FAILURE
+	  fi
+	  arg_mode=target
+	  continue
+	  ;;
+
+	-static | -prefer-pic | -prefer-non-pic)
+	  later="$later $arg"
+	  continue
+	  ;;
+
+	-no-suppress)
+	  suppress_opt=no
+	  continue
+	  ;;
+
+	-Xcompiler)
+	  arg_mode=arg  #  the next one goes into the "base_compile" arg list
+	  continue      #  The current "srcfile" will either be retained or
+	  ;;            #  replaced later.  I would guess that would be a bug.
+
+	-Wc,*)
+	  args=`$echo "X$arg" | $Xsed -e "s/^-Wc,//"`
+	  lastarg=
+	  save_ifs="$IFS"; IFS=','
+ 	  for arg in $args; do
+	    IFS="$save_ifs"
+
+	    # Double-quote args containing other shell metacharacters.
+	    # Many Bourne shells cannot handle close brackets correctly
+	    # in scan sets, so we specify it separately.
+	    case $arg in
+	      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
+	      arg="\"$arg\""
+	      ;;
+	    esac
+	    lastarg="$lastarg $arg"
+	  done
+	  IFS="$save_ifs"
+	  lastarg=`$echo "X$lastarg" | $Xsed -e "s/^ //"`
+
+	  # Add the arguments to base_compile.
+	  base_compile="$base_compile $lastarg"
+	  continue
+	  ;;
+
+	* )
+	  # Accept the current argument as the source file.
+	  # The previous "srcfile" becomes the current argument.
+	  #
+	  lastarg="$srcfile"
+	  srcfile="$arg"
+	  ;;
+	esac  #  case $arg
+	;;
+      esac    #  case $arg_mode
+
+      # Aesthetically quote the previous argument.
+      lastarg=`$echo "X$lastarg" | $Xsed -e "$sed_quote_subst"`
+
+      case $lastarg in
+      # Double-quote args containing other shell metacharacters.
+      # Many Bourne shells cannot handle close brackets correctly
+      # in scan sets, and some SunOS ksh mistreat backslash-escaping
+      # in scan sets (worked around with variable expansion),
+      # and furthermore cannot handle '|' '&' '(' ')' in scan sets 
+      # at all, so we specify them separately.
+      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
+	lastarg="\"$lastarg\""
+	;;
+      esac
+
+      base_compile="$base_compile $lastarg"
+    done # for arg
+
+    case $arg_mode in
+    arg)
+      $echo "$modename: you must specify an argument for -Xcompile"
+      exit $EXIT_FAILURE
+      ;;
+    target)
+      $echo "$modename: you must specify a target with \`-o'" 1>&2
+      exit $EXIT_FAILURE
+      ;;
+    *)
+      # Get the name of the library object.
+      [ -z "$libobj" ] && libobj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%'`
+      ;;
+    esac
+
+    # Recognize several different file suffixes.
+    # If the user specifies -o file.o, it is replaced with file.lo
+    xform='[cCFSifmso]'
+    case $libobj in
+    *.ada) xform=ada ;;
+    *.adb) xform=adb ;;
+    *.ads) xform=ads ;;
+    *.asm) xform=asm ;;
+    *.c++) xform=c++ ;;
+    *.cc) xform=cc ;;
+    *.ii) xform=ii ;;
+    *.class) xform=class ;;
+    *.cpp) xform=cpp ;;
+    *.cxx) xform=cxx ;;
+    *.[fF][09]?) xform=[fF][09]. ;;
+    *.for) xform=for ;;
+    *.java) xform=java ;;
+    *.obj) xform=obj ;;
+    *.sx) xform=sx ;;
+    esac
+
+    libobj=`$echo "X$libobj" | $Xsed -e "s/\.$xform$/.lo/"`
+
+    case $libobj in
+    *.lo) obj=`$echo "X$libobj" | $Xsed -e "$lo2o"` ;;
+    *)
+      $echo "$modename: cannot determine name of library object from \`$libobj'" 1>&2
+      exit $EXIT_FAILURE
+      ;;
+    esac
+
+    func_infer_tag $base_compile
+
+    for arg in $later; do
+      case $arg in
+      -static)
+	build_old_libs=yes
+	continue
+	;;
+
+      -prefer-pic)
+	pic_mode=yes
+	continue
+	;;
+
+      -prefer-non-pic)
+	pic_mode=no
+	continue
+	;;
+      esac
+    done
+
+    qlibobj=`$echo "X$libobj" | $Xsed -e "$sed_quote_subst"`
+    case $qlibobj in
+      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
+	qlibobj="\"$qlibobj\"" ;;
+    esac
+    test "X$libobj" != "X$qlibobj" \
+	&& $echo "X$libobj" | grep '[]~#^*{};<>?"'"'"' 	&()|`$[]' \
+	&& $echo "$modename: libobj name \`$libobj' may not contain shell special characters."
+    objname=`$echo "X$obj" | $Xsed -e 's%^.*/%%'`
+    xdir=`$echo "X$obj" | $Xsed -e 's%/[^/]*$%%'`
+    if test "X$xdir" = "X$obj"; then
+      xdir=
+    else
+      xdir=$xdir/
+    fi
+    lobj=${xdir}$objdir/$objname
+
+    if test -z "$base_compile"; then
+      $echo "$modename: you must specify a compilation command" 1>&2
+      $echo "$help" 1>&2
+      exit $EXIT_FAILURE
+    fi
+
+    # Delete any leftover library objects.
+    if test "$build_old_libs" = yes; then
+      removelist="$obj $lobj $libobj ${libobj}T"
+    else
+      removelist="$lobj $libobj ${libobj}T"
+    fi
+
+    $run $rm $removelist
+    trap "$run $rm $removelist; exit $EXIT_FAILURE" 1 2 15
+
+    # On Cygwin there's no "real" PIC flag so we must build both object types
+    case $host_os in
+    cygwin* | mingw* | pw32* | os2*)
+      pic_mode=default
+      ;;
+    esac
+    if test "$pic_mode" = no && test "$deplibs_check_method" != pass_all; then
+      # non-PIC code in shared libraries is not supported
+      pic_mode=default
+    fi
+
+    # Calculate the filename of the output object if compiler does
+    # not support -o with -c
+    if test "$compiler_c_o" = no; then
+      output_obj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%' -e 's%\.[^.]*$%%'`.${objext}
+      lockfile="$output_obj.lock"
+      removelist="$removelist $output_obj $lockfile"
+      trap "$run $rm $removelist; exit $EXIT_FAILURE" 1 2 15
+    else
+      output_obj=
+      need_locks=no
+      lockfile=
+    fi
+
+    # Lock this critical section if it is needed
+    # We use this script file to make the link, it avoids creating a new file
+    if test "$need_locks" = yes; then
+      until $run ln "$srcfile" "$lockfile" 2>/dev/null; do
+	$show "Waiting for $lockfile to be removed"
+	sleep 2
+      done
+    elif test "$need_locks" = warn; then
+      if test -f "$lockfile"; then
+	$echo "\
+*** ERROR, $lockfile exists and contains:
+`cat $lockfile 2>/dev/null`
+
+This indicates that another process is trying to use the same
+temporary object file, and libtool could not work around it because
+your compiler does not support \`-c' and \`-o' together.  If you
+repeat this compilation, it may succeed, by chance, but you had better
+avoid parallel builds (make -j) in this platform, or get a better
+compiler."
+
+	$run $rm $removelist
+	exit $EXIT_FAILURE
+      fi
+      $echo "$srcfile" > "$lockfile"
+    fi
+
+    if test -n "$fix_srcfile_path"; then
+      eval srcfile=\"$fix_srcfile_path\"
+    fi
+    qsrcfile=`$echo "X$srcfile" | $Xsed -e "$sed_quote_subst"`
+    case $qsrcfile in
+      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
+      qsrcfile="\"$qsrcfile\"" ;;
+    esac
+
+    $run $rm "$libobj" "${libobj}T"
+
+    # Create a libtool object file (analogous to a ".la" file),
+    # but don't create it if we're doing a dry run.
+    test -z "$run" && cat > ${libobj}T <<EOF
+# $libobj - a libtool object file
+# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP
+#
+# Please DO NOT delete this file!
+# It is necessary for linking the library.
+
+# Name of the PIC object.
+EOF
+
+    # Only build a PIC object if we are building libtool libraries.
+    if test "$build_libtool_libs" = yes; then
+      # Without this assignment, base_compile gets emptied.
+      fbsd_hideous_sh_bug=$base_compile
+
+      if test "$pic_mode" != no; then
+	command="$base_compile $qsrcfile $pic_flag"
+      else
+	# Don't build PIC code
+	command="$base_compile $qsrcfile"
+      fi
+
+      if test ! -d "${xdir}$objdir"; then
+	$show "$mkdir ${xdir}$objdir"
+	$run $mkdir ${xdir}$objdir
+	exit_status=$?
+	if test "$exit_status" -ne 0 && test ! -d "${xdir}$objdir"; then
+	  exit $exit_status
+	fi
+      fi
+
+      if test -z "$output_obj"; then
+	# Place PIC objects in $objdir
+	command="$command -o $lobj"
+      fi
+
+      $run $rm "$lobj" "$output_obj"
+
+      $show "$command"
+      if $run eval $lt_env "$command"; then :
+      else
+	test -n "$output_obj" && $run $rm $removelist
+	exit $EXIT_FAILURE
+      fi
+
+      if test "$need_locks" = warn &&
+	 test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then
+	$echo "\
+*** ERROR, $lockfile contains:
+`cat $lockfile 2>/dev/null`
+
+but it should contain:
+$srcfile
+
+This indicates that another process is trying to use the same
+temporary object file, and libtool could not work around it because
+your compiler does not support \`-c' and \`-o' together.  If you
+repeat this compilation, it may succeed, by chance, but you had better
+avoid parallel builds (make -j) in this platform, or get a better
+compiler."
+
+	$run $rm $removelist
+	exit $EXIT_FAILURE
+      fi
+
+      # Just move the object if needed, then go on to compile the next one
+      if test -n "$output_obj" && test "X$output_obj" != "X$lobj"; then
+	$show "$mv $output_obj $lobj"
+	if $run $mv $output_obj $lobj; then :
+	else
+	  error=$?
+	  $run $rm $removelist
+	  exit $error
+	fi
+      fi
+
+      # Append the name of the PIC object to the libtool object file.
+      test -z "$run" && cat >> ${libobj}T <<EOF
+pic_object='$objdir/$objname'
+
+EOF
+
+      # Allow error messages only from the first compilation.
+      if test "$suppress_opt" = yes; then
+        suppress_output=' >/dev/null 2>&1'
+      fi
+    else
+      # No PIC object so indicate it doesn't exist in the libtool
+      # object file.
+      test -z "$run" && cat >> ${libobj}T <<EOF
+pic_object=none
+
+EOF
+    fi
+
+    # Only build a position-dependent object if we build old libraries.
+    if test "$build_old_libs" = yes; then
+      if test "$pic_mode" != yes; then
+	# Don't build PIC code
+	command="$base_compile $qsrcfile"
+      else
+	command="$base_compile $qsrcfile $pic_flag"
+      fi
+      if test "$compiler_c_o" = yes; then
+	command="$command -o $obj"
+      fi
+
+      # Suppress compiler output if we already did a PIC compilation.
+      command="$command$suppress_output"
+      $run $rm "$obj" "$output_obj"
+      $show "$command"
+      if $run eval $lt_env "$command"; then :
+      else
+	$run $rm $removelist
+	exit $EXIT_FAILURE
+      fi
+
+      if test "$need_locks" = warn &&
+	 test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then
+	$echo "\
+*** ERROR, $lockfile contains:
+`cat $lockfile 2>/dev/null`
+
+but it should contain:
+$srcfile
+
+This indicates that another process is trying to use the same
+temporary object file, and libtool could not work around it because
+your compiler does not support \`-c' and \`-o' together.  If you
+repeat this compilation, it may succeed, by chance, but you had better
+avoid parallel builds (make -j) in this platform, or get a better
+compiler."
+
+	$run $rm $removelist
+	exit $EXIT_FAILURE
+      fi
+
+      # Just move the object if needed
+      if test -n "$output_obj" && test "X$output_obj" != "X$obj"; then
+	$show "$mv $output_obj $obj"
+	if $run $mv $output_obj $obj; then :
+	else
+	  error=$?
+	  $run $rm $removelist
+	  exit $error
+	fi
+      fi
+
+      # Append the name of the non-PIC object the libtool object file.
+      # Only append if the libtool object file exists.
+      test -z "$run" && cat >> ${libobj}T <<EOF
+# Name of the non-PIC object.
+non_pic_object='$objname'
+
+EOF
+    else
+      # Append the name of the non-PIC object the libtool object file.
+      # Only append if the libtool object file exists.
+      test -z "$run" && cat >> ${libobj}T <<EOF
+# Name of the non-PIC object.
+non_pic_object=none
+
+EOF
+    fi
+
+    $run $mv "${libobj}T" "${libobj}"
+
+    # Unlock the critical section if it was locked
+    if test "$need_locks" != no; then
+      $run $rm "$lockfile"
+    fi
+
+    exit $EXIT_SUCCESS
+    ;;
+
+  # libtool link mode
+  link | relink)
+    modename="$modename: link"
+    case $host in
+    *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
+      # It is impossible to link a dll without this setting, and
+      # we shouldn't force the makefile maintainer to figure out
+      # which system we are compiling for in order to pass an extra
+      # flag for every libtool invocation.
+      # allow_undefined=no
+
+      # FIXME: Unfortunately, there are problems with the above when trying
+      # to make a dll which has undefined symbols, in which case not
+      # even a static library is built.  For now, we need to specify
+      # -no-undefined on the libtool link line when we can be certain
+      # that all symbols are satisfied, otherwise we get a static library.
+      allow_undefined=yes
+      ;;
+    *)
+      allow_undefined=yes
+      ;;
+    esac
+    libtool_args="$nonopt"
+    base_compile="$nonopt $@"
+    compile_command="$nonopt"
+    finalize_command="$nonopt"
+
+    compile_rpath=
+    finalize_rpath=
+    compile_shlibpath=
+    finalize_shlibpath=
+    convenience=
+    old_convenience=
+    deplibs=
+    old_deplibs=
+    compiler_flags=
+    linker_flags=
+    dllsearchpath=
+    lib_search_path=`pwd`
+    inst_prefix_dir=
+
+    avoid_version=no
+    dlfiles=
+    dlprefiles=
+    dlself=no
+    export_dynamic=no
+    export_symbols=
+    export_symbols_regex=
+    generated=
+    libobjs=
+    ltlibs=
+    module=no
+    no_install=no
+    objs=
+    non_pic_objects=
+    notinst_path= # paths that contain not-installed libtool libraries
+    precious_files_regex=
+    prefer_static_libs=no
+    preload=no
+    prev=
+    prevarg=
+    release=
+    rpath=
+    xrpath=
+    perm_rpath=
+    temp_rpath=
+    thread_safe=no
+    vinfo=
+    vinfo_number=no
+    single_module="${wl}-single_module"
+
+    func_infer_tag $base_compile
+
+    # We need to know -static, to get the right output filenames.
+    for arg
+    do
+      case $arg in
+      -all-static | -static | -static-libtool-libs)
+	case $arg in
+	-all-static)
+	  if test "$build_libtool_libs" = yes && test -z "$link_static_flag"; then
+	    $echo "$modename: warning: complete static linking is impossible in this configuration" 1>&2
+	  fi
+	  if test -n "$link_static_flag"; then
+	    dlopen_self=$dlopen_self_static
+	  fi
+	  prefer_static_libs=yes
+	  ;;
+	-static)
+	  if test -z "$pic_flag" && test -n "$link_static_flag"; then
+	    dlopen_self=$dlopen_self_static
+	  fi
+	  prefer_static_libs=built
+	  ;;
+	-static-libtool-libs)
+	  if test -z "$pic_flag" && test -n "$link_static_flag"; then
+	    dlopen_self=$dlopen_self_static
+	  fi
+	  prefer_static_libs=yes
+	  ;;
+	esac
+	build_libtool_libs=no
+	build_old_libs=yes
+	break
+	;;
+      esac
+    done
+
+    # See if our shared archives depend on static archives.
+    test -n "$old_archive_from_new_cmds" && build_old_libs=yes
+
+    # Go through the arguments, transforming them on the way.
+    while test "$#" -gt 0; do
+      arg="$1"
+      shift
+      case $arg in
+      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
+	qarg=\"`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`\" ### testsuite: skip nested quoting test
+	;;
+      *) qarg=$arg ;;
+      esac
+      libtool_args="$libtool_args $qarg"
+
+      # If the previous option needs an argument, assign it.
+      if test -n "$prev"; then
+	case $prev in
+	output)
+	  compile_command="$compile_command @OUTPUT@"
+	  finalize_command="$finalize_command @OUTPUT@"
+	  ;;
+	esac
+
+	case $prev in
+	dlfiles|dlprefiles)
+	  if test "$preload" = no; then
+	    # Add the symbol object into the linking commands.
+	    compile_command="$compile_command @SYMFILE@"
+	    finalize_command="$finalize_command @SYMFILE@"
+	    preload=yes
+	  fi
+	  case $arg in
+	  *.la | *.lo) ;;  # We handle these cases below.
+	  force)
+	    if test "$dlself" = no; then
+	      dlself=needless
+	      export_dynamic=yes
+	    fi
+	    prev=
+	    continue
+	    ;;
+	  self)
+	    if test "$prev" = dlprefiles; then
+	      dlself=yes
+	    elif test "$prev" = dlfiles && test "$dlopen_self" != yes; then
+	      dlself=yes
+	    else
+	      dlself=needless
+	      export_dynamic=yes
+	    fi
+	    prev=
+	    continue
+	    ;;
+	  *)
+	    if test "$prev" = dlfiles; then
+	      dlfiles="$dlfiles $arg"
+	    else
+	      dlprefiles="$dlprefiles $arg"
+	    fi
+	    prev=
+	    continue
+	    ;;
+	  esac
+	  ;;
+	expsyms)
+	  export_symbols="$arg"
+	  if test ! -f "$arg"; then
+	    $echo "$modename: symbol file \`$arg' does not exist"
+	    exit $EXIT_FAILURE
+	  fi
+	  prev=
+	  continue
+	  ;;
+	expsyms_regex)
+	  export_symbols_regex="$arg"
+	  prev=
+	  continue
+	  ;;
+	inst_prefix)
+	  inst_prefix_dir="$arg"
+	  prev=
+	  continue
+	  ;;
+	precious_regex)
+	  precious_files_regex="$arg"
+	  prev=
+	  continue
+	  ;;
+	release)
+	  release="-$arg"
+	  prev=
+	  continue
+	  ;;
+	objectlist)
+	  if test -f "$arg"; then
+	    save_arg=$arg
+	    moreargs=
+	    for fil in `cat $save_arg`
+	    do
+#	      moreargs="$moreargs $fil"
+	      arg=$fil
+	      # A libtool-controlled object.
+
+	      # Check to see that this really is a libtool object.
+	      if (${SED} -e '2q' $arg | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
+		pic_object=
+		non_pic_object=
+
+		# Read the .lo file
+		# If there is no directory component, then add one.
+		case $arg in
+		*/* | *\\*) . $arg ;;
+		*) . ./$arg ;;
+		esac
+
+		if test -z "$pic_object" || \
+		   test -z "$non_pic_object" ||
+		   test "$pic_object" = none && \
+		   test "$non_pic_object" = none; then
+		  $echo "$modename: cannot find name of object for \`$arg'" 1>&2
+		  exit $EXIT_FAILURE
+		fi
+
+		# Extract subdirectory from the argument.
+		xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'`
+		if test "X$xdir" = "X$arg"; then
+		  xdir=
+		else
+		  xdir="$xdir/"
+		fi
+
+		if test "$pic_object" != none; then
+		  # Prepend the subdirectory the object is found in.
+		  pic_object="$xdir$pic_object"
+
+		  if test "$prev" = dlfiles; then
+		    if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
+		      dlfiles="$dlfiles $pic_object"
+		      prev=
+		      continue
+		    else
+		      # If libtool objects are unsupported, then we need to preload.
+		      prev=dlprefiles
+		    fi
+		  fi
+
+		  # CHECK ME:  I think I busted this.  -Ossama
+		  if test "$prev" = dlprefiles; then
+		    # Preload the old-style object.
+		    dlprefiles="$dlprefiles $pic_object"
+		    prev=
+		  fi
+
+		  # A PIC object.
+		  libobjs="$libobjs $pic_object"
+		  arg="$pic_object"
+		fi
+
+		# Non-PIC object.
+		if test "$non_pic_object" != none; then
+		  # Prepend the subdirectory the object is found in.
+		  non_pic_object="$xdir$non_pic_object"
+
+		  # A standard non-PIC object
+		  non_pic_objects="$non_pic_objects $non_pic_object"
+		  if test -z "$pic_object" || test "$pic_object" = none ; then
+		    arg="$non_pic_object"
+		  fi
+		else
+		  # If the PIC object exists, use it instead.
+		  # $xdir was prepended to $pic_object above.
+		  non_pic_object="$pic_object"
+		  non_pic_objects="$non_pic_objects $non_pic_object"
+		fi
+	      else
+		# Only an error if not doing a dry-run.
+		if test -z "$run"; then
+		  $echo "$modename: \`$arg' is not a valid libtool object" 1>&2
+		  exit $EXIT_FAILURE
+		else
+		  # Dry-run case.
+
+		  # Extract subdirectory from the argument.
+		  xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'`
+		  if test "X$xdir" = "X$arg"; then
+		    xdir=
+		  else
+		    xdir="$xdir/"
+		  fi
+
+		  pic_object=`$echo "X${xdir}${objdir}/${arg}" | $Xsed -e "$lo2o"`
+		  non_pic_object=`$echo "X${xdir}${arg}" | $Xsed -e "$lo2o"`
+		  libobjs="$libobjs $pic_object"
+		  non_pic_objects="$non_pic_objects $non_pic_object"
+		fi
+	      fi
+	    done
+	  else
+	    $echo "$modename: link input file \`$save_arg' does not exist"
+	    exit $EXIT_FAILURE
+	  fi
+	  arg=$save_arg
+	  prev=
+	  continue
+	  ;;
+	rpath | xrpath)
+	  # We need an absolute path.
+	  case $arg in
+	  [\\/]* | [A-Za-z]:[\\/]*) ;;
+	  *)
+	    $echo "$modename: only absolute run-paths are allowed" 1>&2
+	    exit $EXIT_FAILURE
+	    ;;
+	  esac
+	  if test "$prev" = rpath; then
+	    case "$rpath " in
+	    *" $arg "*) ;;
+	    *) rpath="$rpath $arg" ;;
+	    esac
+	  else
+	    case "$xrpath " in
+	    *" $arg "*) ;;
+	    *) xrpath="$xrpath $arg" ;;
+	    esac
+	  fi
+	  prev=
+	  continue
+	  ;;
+	xcompiler)
+	  compiler_flags="$compiler_flags $qarg"
+	  prev=
+	  compile_command="$compile_command $qarg"
+	  finalize_command="$finalize_command $qarg"
+	  continue
+	  ;;
+	xlinker)
+	  linker_flags="$linker_flags $qarg"
+	  compiler_flags="$compiler_flags $wl$qarg"
+	  prev=
+	  compile_command="$compile_command $wl$qarg"
+	  finalize_command="$finalize_command $wl$qarg"
+	  continue
+	  ;;
+	xcclinker)
+	  linker_flags="$linker_flags $qarg"
+	  compiler_flags="$compiler_flags $qarg"
+	  prev=
+	  compile_command="$compile_command $qarg"
+	  finalize_command="$finalize_command $qarg"
+	  continue
+	  ;;
+	shrext)
+  	  shrext_cmds="$arg"
+	  prev=
+	  continue
+	  ;;
+	darwin_framework|darwin_framework_skip)
+	  test "$prev" = "darwin_framework" && compiler_flags="$compiler_flags $arg"
+	  compile_command="$compile_command $arg"
+	  finalize_command="$finalize_command $arg"
+	  prev=
+	  continue
+	  ;;
+	*)
+	  eval "$prev=\"\$arg\""
+	  prev=
+	  continue
+	  ;;
+	esac
+      fi # test -n "$prev"
+
+      prevarg="$arg"
+
+      case $arg in
+      -all-static)
+	if test -n "$link_static_flag"; then
+	  compile_command="$compile_command $link_static_flag"
+	  finalize_command="$finalize_command $link_static_flag"
+	fi
+	continue
+	;;
+
+      -allow-undefined)
+	# FIXME: remove this flag sometime in the future.
+	$echo "$modename: \`-allow-undefined' is deprecated because it is the default" 1>&2
+	continue
+	;;
+
+      -avoid-version)
+	avoid_version=yes
+	continue
+	;;
+
+      -dlopen)
+	prev=dlfiles
+	continue
+	;;
+
+      -dlpreopen)
+	prev=dlprefiles
+	continue
+	;;
+
+      -export-dynamic)
+	export_dynamic=yes
+	continue
+	;;
+
+      -export-symbols | -export-symbols-regex)
+	if test -n "$export_symbols" || test -n "$export_symbols_regex"; then
+	  $echo "$modename: more than one -exported-symbols argument is not allowed"
+	  exit $EXIT_FAILURE
+	fi
+	if test "X$arg" = "X-export-symbols"; then
+	  prev=expsyms
+	else
+	  prev=expsyms_regex
+	fi
+	continue
+	;;
+
+      -framework|-arch|-isysroot)
+	case " $CC " in
+	  *" ${arg} ${1} "* | *" ${arg}	${1} "*) 
+		prev=darwin_framework_skip ;;
+	  *) compiler_flags="$compiler_flags $arg"
+	     prev=darwin_framework ;;
+	esac
+	compile_command="$compile_command $arg"
+	finalize_command="$finalize_command $arg"
+	continue
+	;;
+
+      -inst-prefix-dir)
+	prev=inst_prefix
+	continue
+	;;
+
+      # The native IRIX linker understands -LANG:*, -LIST:* and -LNO:*
+      # so, if we see these flags be careful not to treat them like -L
+      -L[A-Z][A-Z]*:*)
+	case $with_gcc/$host in
+	no/*-*-irix* | /*-*-irix*)
+	  compile_command="$compile_command $arg"
+	  finalize_command="$finalize_command $arg"
+	  ;;
+	esac
+	continue
+	;;
+
+      -L*)
+	dir=`$echo "X$arg" | $Xsed -e 's/^-L//'`
+	# We need an absolute path.
+	case $dir in
+	[\\/]* | [A-Za-z]:[\\/]*) ;;
+	*)
+	  absdir=`cd "$dir" && pwd`
+	  if test -z "$absdir"; then
+	    $echo "$modename: cannot determine absolute directory name of \`$dir'" 1>&2
+	    absdir="$dir"
+	    notinst_path="$notinst_path $dir"
+	  fi
+	  dir="$absdir"
+	  ;;
+	esac
+	case "$deplibs " in
+	*" -L$dir "*) ;;
+	*)
+	  deplibs="$deplibs -L$dir"
+	  lib_search_path="$lib_search_path $dir"
+	  ;;
+	esac
+	case $host in
+	*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
+	  testbindir=`$echo "X$dir" | $Xsed -e 's*/lib$*/bin*'`
+	  case :$dllsearchpath: in
+	  *":$dir:"*) ;;
+	  *) dllsearchpath="$dllsearchpath:$dir";;
+	  esac
+	  case :$dllsearchpath: in
+	  *":$testbindir:"*) ;;
+	  *) dllsearchpath="$dllsearchpath:$testbindir";;
+	  esac
+	  ;;
+	esac
+	continue
+	;;
+
+      -l*)
+	if test "X$arg" = "X-lc" || test "X$arg" = "X-lm"; then
+	  case $host in
+	  *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos*)
+	    # These systems don't actually have a C or math library (as such)
+	    continue
+	    ;;
+	  *-*-os2*)
+	    # These systems don't actually have a C library (as such)
+	    test "X$arg" = "X-lc" && continue
+	    ;;
+	  *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
+	    # Do not include libc due to us having libc/libc_r.
+	    test "X$arg" = "X-lc" && continue
+	    ;;
+	  *-*-rhapsody* | *-*-darwin1.[012])
+	    # Rhapsody C and math libraries are in the System framework
+	    deplibs="$deplibs -framework System"
+	    continue
+	    ;;
+	  *-*-sco3.2v5* | *-*-sco5v6*)
+	    # Causes problems with __ctype
+	    test "X$arg" = "X-lc" && continue
+	    ;;
+	  *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*)
+	    # Compiler inserts libc in the correct place for threads to work
+	    test "X$arg" = "X-lc" && continue
+	    ;;
+	  esac
+	elif test "X$arg" = "X-lc_r"; then
+	 case $host in
+	 *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
+	   # Do not include libc_r directly, use -pthread flag.
+	   continue
+	   ;;
+	 esac
+	fi
+	deplibs="$deplibs $arg"
+	continue
+	;;
+
+      # Tru64 UNIX uses -model [arg] to determine the layout of C++
+      # classes, name mangling, and exception handling.
+      -model)
+	compile_command="$compile_command $arg"
+	compiler_flags="$compiler_flags $arg"
+	finalize_command="$finalize_command $arg"
+	prev=xcompiler
+	continue
+	;;
+
+     -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe|-threads)
+	compiler_flags="$compiler_flags $arg"
+	compile_command="$compile_command $arg"
+	finalize_command="$finalize_command $arg"
+	continue
+	;;
+
+      -multi_module)
+	single_module="${wl}-multi_module"
+	continue
+	;;
+
+      -module)
+	module=yes
+	continue
+	;;
+
+      # -64, -mips[0-9] enable 64-bit mode on the SGI compiler
+      # -r[0-9][0-9]* specifies the processor on the SGI compiler
+      # -xarch=*, -xtarget=* enable 64-bit mode on the Sun compiler
+      # +DA*, +DD* enable 64-bit mode on the HP compiler
+      # -q* pass through compiler args for the IBM compiler
+      # -m* pass through architecture-specific compiler args for GCC
+      # -m*, -t[45]*, -txscale* pass through architecture-specific
+      # compiler args for GCC
+      # -p, -pg, --coverage, -fprofile-* pass through profiling flag for GCC
+      # -F/path gives path to uninstalled frameworks, gcc on darwin
+      # @file GCC response files
+      -64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*| \
+      -t[45]*|-txscale*|-p|-pg|--coverage|-fprofile-*|-F*|@*)
+
+	# Unknown arguments in both finalize_command and compile_command need
+	# to be aesthetically quoted because they are evaled later.
+	arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
+	case $arg in
+	*[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
+	  arg="\"$arg\""
+	  ;;
+	esac
+        compile_command="$compile_command $arg"
+        finalize_command="$finalize_command $arg"
+        compiler_flags="$compiler_flags $arg"
+        continue
+        ;;
+
+      -shrext)
+	prev=shrext
+	continue
+	;;
+
+      -no-fast-install)
+	fast_install=no
+	continue
+	;;
+
+      -no-install)
+	case $host in
+	*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-darwin*)
+	  # The PATH hackery in wrapper scripts is required on Windows
+	  # and Darwin in order for the loader to find any dlls it needs.
+	  $echo "$modename: warning: \`-no-install' is ignored for $host" 1>&2
+	  $echo "$modename: warning: assuming \`-no-fast-install' instead" 1>&2
+	  fast_install=no
+	  ;;
+	*) no_install=yes ;;
+	esac
+	continue
+	;;
+
+      -no-undefined)
+	allow_undefined=no
+	continue
+	;;
+
+      -objectlist)
+	prev=objectlist
+	continue
+	;;
+
+      -o) prev=output ;;
+
+      -precious-files-regex)
+	prev=precious_regex
+	continue
+	;;
+
+      -release)
+	prev=release
+	continue
+	;;
+
+      -rpath)
+	prev=rpath
+	continue
+	;;
+
+      -R)
+	prev=xrpath
+	continue
+	;;
+
+      -R*)
+	dir=`$echo "X$arg" | $Xsed -e 's/^-R//'`
+	# We need an absolute path.
+	case $dir in
+	[\\/]* | [A-Za-z]:[\\/]*) ;;
+	*)
+	  $echo "$modename: only absolute run-paths are allowed" 1>&2
+	  exit $EXIT_FAILURE
+	  ;;
+	esac
+	case "$xrpath " in
+	*" $dir "*) ;;
+	*) xrpath="$xrpath $dir" ;;
+	esac
+	continue
+	;;
+
+      -static | -static-libtool-libs)
+	# The effects of -static are defined in a previous loop.
+	# We used to do the same as -all-static on platforms that
+	# didn't have a PIC flag, but the assumption that the effects
+	# would be equivalent was wrong.  It would break on at least
+	# Digital Unix and AIX.
+	continue
+	;;
+
+      -thread-safe)
+	thread_safe=yes
+	continue
+	;;
+
+      -version-info)
+	prev=vinfo
+	continue
+	;;
+      -version-number)
+	prev=vinfo
+	vinfo_number=yes
+	continue
+	;;
+
+      -Wc,*)
+	args=`$echo "X$arg" | $Xsed -e "$sed_quote_subst" -e 's/^-Wc,//'`
+	arg=
+	save_ifs="$IFS"; IFS=','
+	for flag in $args; do
+	  IFS="$save_ifs"
+	  case $flag in
+	    *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
+	    flag="\"$flag\""
+	    ;;
+	  esac
+	  arg="$arg $wl$flag"
+	  compiler_flags="$compiler_flags $flag"
+	done
+	IFS="$save_ifs"
+	arg=`$echo "X$arg" | $Xsed -e "s/^ //"`
+	;;
+
+      -Wl,*)
+	args=`$echo "X$arg" | $Xsed -e "$sed_quote_subst" -e 's/^-Wl,//'`
+	arg=
+	save_ifs="$IFS"; IFS=','
+	for flag in $args; do
+	  IFS="$save_ifs"
+	  case $flag in
+	    *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
+	    flag="\"$flag\""
+	    ;;
+	  esac
+	  arg="$arg $wl$flag"
+	  compiler_flags="$compiler_flags $wl$flag"
+	  linker_flags="$linker_flags $flag"
+	done
+	IFS="$save_ifs"
+	arg=`$echo "X$arg" | $Xsed -e "s/^ //"`
+	;;
+
+      -Xcompiler)
+	prev=xcompiler
+	continue
+	;;
+
+      -Xlinker)
+	prev=xlinker
+	continue
+	;;
+
+      -XCClinker)
+	prev=xcclinker
+	continue
+	;;
+
+      # Some other compiler flag.
+      -* | +*)
+	# Unknown arguments in both finalize_command and compile_command need
+	# to be aesthetically quoted because they are evaled later.
+	arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
+	case $arg in
+	*[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
+	  arg="\"$arg\""
+	  ;;
+	esac
+	;;
+
+      *.$objext)
+	# A standard object.
+	objs="$objs $arg"
+	;;
+
+      *.lo)
+	# A libtool-controlled object.
+
+	# Check to see that this really is a libtool object.
+	if (${SED} -e '2q' $arg | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
+	  pic_object=
+	  non_pic_object=
+
+	  # Read the .lo file
+	  # If there is no directory component, then add one.
+	  case $arg in
+	  */* | *\\*) . $arg ;;
+	  *) . ./$arg ;;
+	  esac
+
+	  if test -z "$pic_object" || \
+	     test -z "$non_pic_object" ||
+	     test "$pic_object" = none && \
+	     test "$non_pic_object" = none; then
+	    $echo "$modename: cannot find name of object for \`$arg'" 1>&2
+	    exit $EXIT_FAILURE
+	  fi
+
+	  # Extract subdirectory from the argument.
+	  xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'`
+	  if test "X$xdir" = "X$arg"; then
+	    xdir=
+ 	  else
+	    xdir="$xdir/"
+	  fi
+
+	  if test "$pic_object" != none; then
+	    # Prepend the subdirectory the object is found in.
+	    pic_object="$xdir$pic_object"
+
+	    if test "$prev" = dlfiles; then
+	      if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
+		dlfiles="$dlfiles $pic_object"
+		prev=
+		continue
+	      else
+		# If libtool objects are unsupported, then we need to preload.
+		prev=dlprefiles
+	      fi
+	    fi
+
+	    # CHECK ME:  I think I busted this.  -Ossama
+	    if test "$prev" = dlprefiles; then
+	      # Preload the old-style object.
+	      dlprefiles="$dlprefiles $pic_object"
+	      prev=
+	    fi
+
+	    # A PIC object.
+	    libobjs="$libobjs $pic_object"
+	    arg="$pic_object"
+	  fi
+
+	  # Non-PIC object.
+	  if test "$non_pic_object" != none; then
+	    # Prepend the subdirectory the object is found in.
+	    non_pic_object="$xdir$non_pic_object"
+
+	    # A standard non-PIC object
+	    non_pic_objects="$non_pic_objects $non_pic_object"
+	    if test -z "$pic_object" || test "$pic_object" = none ; then
+	      arg="$non_pic_object"
+	    fi
+	  else
+	    # If the PIC object exists, use it instead.
+	    # $xdir was prepended to $pic_object above.
+	    non_pic_object="$pic_object"
+	    non_pic_objects="$non_pic_objects $non_pic_object"
+	  fi
+	else
+	  # Only an error if not doing a dry-run.
+	  if test -z "$run"; then
+	    $echo "$modename: \`$arg' is not a valid libtool object" 1>&2
+	    exit $EXIT_FAILURE
+	  else
+	    # Dry-run case.
+
+	    # Extract subdirectory from the argument.
+	    xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'`
+	    if test "X$xdir" = "X$arg"; then
+	      xdir=
+	    else
+	      xdir="$xdir/"
+	    fi
+
+	    pic_object=`$echo "X${xdir}${objdir}/${arg}" | $Xsed -e "$lo2o"`
+	    non_pic_object=`$echo "X${xdir}${arg}" | $Xsed -e "$lo2o"`
+	    libobjs="$libobjs $pic_object"
+	    non_pic_objects="$non_pic_objects $non_pic_object"
+	  fi
+	fi
+	;;
+
+      *.$libext)
+	# An archive.
+	deplibs="$deplibs $arg"
+	old_deplibs="$old_deplibs $arg"
+	continue
+	;;
+
+      *.la)
+	# A libtool-controlled library.
+
+	if test "$prev" = dlfiles; then
+	  # This library was specified with -dlopen.
+	  dlfiles="$dlfiles $arg"
+	  prev=
+	elif test "$prev" = dlprefiles; then
+	  # The library was specified with -dlpreopen.
+	  dlprefiles="$dlprefiles $arg"
+	  prev=
+	else
+	  deplibs="$deplibs $arg"
+	fi
+	continue
+	;;
+
+      # Some other compiler argument.
+      *)
+	# Unknown arguments in both finalize_command and compile_command need
+	# to be aesthetically quoted because they are evaled later.
+	arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
+	case $arg in
+	*[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
+	  arg="\"$arg\""
+	  ;;
+	esac
+	;;
+      esac # arg
+
+      # Now actually substitute the argument into the commands.
+      if test -n "$arg"; then
+	compile_command="$compile_command $arg"
+	finalize_command="$finalize_command $arg"
+      fi
+    done # argument parsing loop
+
+    if test -n "$prev"; then
+      $echo "$modename: the \`$prevarg' option requires an argument" 1>&2
+      $echo "$help" 1>&2
+      exit $EXIT_FAILURE
+    fi
+
+    if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then
+      eval arg=\"$export_dynamic_flag_spec\"
+      compile_command="$compile_command $arg"
+      finalize_command="$finalize_command $arg"
+    fi
+
+    oldlibs=
+    # calculate the name of the file, without its directory
+    outputname=`$echo "X$output" | $Xsed -e 's%^.*/%%'`
+    libobjs_save="$libobjs"
+
+    if test -n "$shlibpath_var"; then
+      # get the directories listed in $shlibpath_var
+      eval shlib_search_path=\`\$echo \"X\${$shlibpath_var}\" \| \$Xsed -e \'s/:/ /g\'\`
+    else
+      shlib_search_path=
+    fi
+    eval sys_lib_search_path=\"$sys_lib_search_path_spec\"
+    eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\"
+
+    output_objdir=`$echo "X$output" | $Xsed -e 's%/[^/]*$%%'`
+    if test "X$output_objdir" = "X$output"; then
+      output_objdir="$objdir"
+    else
+      output_objdir="$output_objdir/$objdir"
+    fi
+    # Create the object directory.
+    if test ! -d "$output_objdir"; then
+      $show "$mkdir $output_objdir"
+      $run $mkdir $output_objdir
+      exit_status=$?
+      if test "$exit_status" -ne 0 && test ! -d "$output_objdir"; then
+	exit $exit_status
+      fi
+    fi
+
+    # Determine the type of output
+    case $output in
+    "")
+      $echo "$modename: you must specify an output file" 1>&2
+      $echo "$help" 1>&2
+      exit $EXIT_FAILURE
+      ;;
+    *.$libext) linkmode=oldlib ;;
+    *.lo | *.$objext) linkmode=obj ;;
+    *.la) linkmode=lib ;;
+    *) linkmode=prog ;; # Anything else should be a program.
+    esac
+
+    case $host in
+    *cygwin* | *mingw* | *pw32*)
+      # don't eliminate duplications in $postdeps and $predeps
+      duplicate_compiler_generated_deps=yes
+      ;;
+    *)
+      duplicate_compiler_generated_deps=$duplicate_deps
+      ;;
+    esac
+    specialdeplibs=
+
+    libs=
+    # Find all interdependent deplibs by searching for libraries
+    # that are linked more than once (e.g. -la -lb -la)
+    for deplib in $deplibs; do
+      if test "X$duplicate_deps" = "Xyes" ; then
+	case "$libs " in
+	*" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
+	esac
+      fi
+      libs="$libs $deplib"
+    done
+
+    if test "$linkmode" = lib; then
+      libs="$predeps $libs $compiler_lib_search_path $postdeps"
+
+      # Compute libraries that are listed more than once in $predeps
+      # $postdeps and mark them as special (i.e., whose duplicates are
+      # not to be eliminated).
+      pre_post_deps=
+      if test "X$duplicate_compiler_generated_deps" = "Xyes" ; then
+	for pre_post_dep in $predeps $postdeps; do
+	  case "$pre_post_deps " in
+	  *" $pre_post_dep "*) specialdeplibs="$specialdeplibs $pre_post_deps" ;;
+	  esac
+	  pre_post_deps="$pre_post_deps $pre_post_dep"
+	done
+      fi
+      pre_post_deps=
+    fi
+
+    deplibs=
+    newdependency_libs=
+    newlib_search_path=
+    need_relink=no # whether we're linking any uninstalled libtool libraries
+    notinst_deplibs= # not-installed libtool libraries
+    case $linkmode in
+    lib)
+	passes="conv link"
+	for file in $dlfiles $dlprefiles; do
+	  case $file in
+	  *.la) ;;
+	  *)
+	    $echo "$modename: libraries can \`-dlopen' only libtool libraries: $file" 1>&2
+	    exit $EXIT_FAILURE
+	    ;;
+	  esac
+	done
+	;;
+    prog)
+	compile_deplibs=
+	finalize_deplibs=
+	alldeplibs=no
+	newdlfiles=
+	newdlprefiles=
+	passes="conv scan dlopen dlpreopen link"
+	;;
+    *)  passes="conv"
+	;;
+    esac
+    for pass in $passes; do
+      if test "$linkmode,$pass" = "lib,link" ||
+	 test "$linkmode,$pass" = "prog,scan"; then
+	libs="$deplibs"
+	deplibs=
+      fi
+      if test "$linkmode" = prog; then
+	case $pass in
+	dlopen) libs="$dlfiles" ;;
+	dlpreopen) libs="$dlprefiles" ;;
+	link) libs="$deplibs %DEPLIBS% $dependency_libs" ;;
+	esac
+      fi
+      if test "$pass" = dlopen; then
+	# Collect dlpreopened libraries
+	save_deplibs="$deplibs"
+	deplibs=
+      fi
+      for deplib in $libs; do
+	lib=
+	found=no
+	case $deplib in
+	-mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe|-threads)
+	  if test "$linkmode,$pass" = "prog,link"; then
+	    compile_deplibs="$deplib $compile_deplibs"
+	    finalize_deplibs="$deplib $finalize_deplibs"
+	  else
+	    compiler_flags="$compiler_flags $deplib"
+	  fi
+	  continue
+	  ;;
+	-l*)
+	  if test "$linkmode" != lib && test "$linkmode" != prog; then
+	    $echo "$modename: warning: \`-l' is ignored for archives/objects" 1>&2
+	    continue
+	  fi
+	  name=`$echo "X$deplib" | $Xsed -e 's/^-l//'`
+	  if test "$linkmode" = lib; then
+	    searchdirs="$newlib_search_path $lib_search_path $compiler_lib_search_dirs $sys_lib_search_path $shlib_search_path"
+	  else
+	    searchdirs="$newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path"
+	  fi
+	  for searchdir in $searchdirs; do
+	    for search_ext in .la $std_shrext .so .a; do
+	      # Search the libtool library
+	      lib="$searchdir/lib${name}${search_ext}"
+	      if test -f "$lib"; then
+		if test "$search_ext" = ".la"; then
+		  found=yes
+		else
+		  found=no
+		fi
+		break 2
+	      fi
+	    done
+	  done
+	  if test "$found" != yes; then
+	    # deplib doesn't seem to be a libtool library
+	    if test "$linkmode,$pass" = "prog,link"; then
+	      compile_deplibs="$deplib $compile_deplibs"
+	      finalize_deplibs="$deplib $finalize_deplibs"
+	    else
+	      deplibs="$deplib $deplibs"
+	      test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs"
+	    fi
+	    continue
+	  else # deplib is a libtool library
+	    # If $allow_libtool_libs_with_static_runtimes && $deplib is a stdlib,
+	    # We need to do some special things here, and not later.
+	    if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+	      case " $predeps $postdeps " in
+	      *" $deplib "*)
+		if (${SED} -e '2q' $lib |
+                    grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
+		  library_names=
+		  old_library=
+		  case $lib in
+		  */* | *\\*) . $lib ;;
+		  *) . ./$lib ;;
+		  esac
+		  for l in $old_library $library_names; do
+		    ll="$l"
+		  done
+		  if test "X$ll" = "X$old_library" ; then # only static version available
+		    found=no
+		    ladir=`$echo "X$lib" | $Xsed -e 's%/[^/]*$%%'`
+		    test "X$ladir" = "X$lib" && ladir="."
+		    lib=$ladir/$old_library
+		    if test "$linkmode,$pass" = "prog,link"; then
+		      compile_deplibs="$deplib $compile_deplibs"
+		      finalize_deplibs="$deplib $finalize_deplibs"
+		    else
+		      deplibs="$deplib $deplibs"
+		      test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs"
+		    fi
+		    continue
+		  fi
+		fi
+	        ;;
+	      *) ;;
+	      esac
+	    fi
+	  fi
+	  ;; # -l
+	-L*)
+	  case $linkmode in
+	  lib)
+	    deplibs="$deplib $deplibs"
+	    test "$pass" = conv && continue
+	    newdependency_libs="$deplib $newdependency_libs"
+	    newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`
+	    ;;
+	  prog)
+	    if test "$pass" = conv; then
+	      deplibs="$deplib $deplibs"
+	      continue
+	    fi
+	    if test "$pass" = scan; then
+	      deplibs="$deplib $deplibs"
+	    else
+	      compile_deplibs="$deplib $compile_deplibs"
+	      finalize_deplibs="$deplib $finalize_deplibs"
+	    fi
+	    newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`
+	    ;;
+	  *)
+	    $echo "$modename: warning: \`-L' is ignored for archives/objects" 1>&2
+	    ;;
+	  esac # linkmode
+	  continue
+	  ;; # -L
+	-R*)
+	  if test "$pass" = link; then
+	    dir=`$echo "X$deplib" | $Xsed -e 's/^-R//'`
+	    # Make sure the xrpath contains only unique directories.
+	    case "$xrpath " in
+	    *" $dir "*) ;;
+	    *) xrpath="$xrpath $dir" ;;
+	    esac
+	  fi
+	  deplibs="$deplib $deplibs"
+	  continue
+	  ;;
+	*.la) lib="$deplib" ;;
+	*.$libext)
+	  if test "$pass" = conv; then
+	    deplibs="$deplib $deplibs"
+	    continue
+	  fi
+	  case $linkmode in
+	  lib)
+	    valid_a_lib=no
+	    case $deplibs_check_method in
+	      match_pattern*)
+		set dummy $deplibs_check_method
+	        match_pattern_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"`
+		if eval $echo \"$deplib\" 2>/dev/null \
+		    | $SED 10q \
+		    | $EGREP "$match_pattern_regex" > /dev/null; then
+		  valid_a_lib=yes
+		fi
+		;;
+	      pass_all)
+		valid_a_lib=yes
+		;;
+            esac
+	    if test "$valid_a_lib" != yes; then
+	      $echo
+	      $echo "*** Warning: Trying to link with static lib archive $deplib."
+	      $echo "*** I have the capability to make that library automatically link in when"
+	      $echo "*** you link to this library.  But I can only do this if you have a"
+	      $echo "*** shared version of the library, which you do not appear to have"
+	      $echo "*** because the file extensions .$libext of this argument makes me believe"
+	      $echo "*** that it is just a static archive that I should not used here."
+	    else
+	      $echo
+	      $echo "*** Warning: Linking the shared library $output against the"
+	      $echo "*** static library $deplib is not portable!"
+	      deplibs="$deplib $deplibs"
+	    fi
+	    continue
+	    ;;
+	  prog)
+	    if test "$pass" != link; then
+	      deplibs="$deplib $deplibs"
+	    else
+	      compile_deplibs="$deplib $compile_deplibs"
+	      finalize_deplibs="$deplib $finalize_deplibs"
+	    fi
+	    continue
+	    ;;
+	  esac # linkmode
+	  ;; # *.$libext
+	*.lo | *.$objext)
+	  if test "$pass" = conv; then
+	    deplibs="$deplib $deplibs"
+	  elif test "$linkmode" = prog; then
+	    if test "$pass" = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then
+	      # If there is no dlopen support or we're linking statically,
+	      # we need to preload.
+	      newdlprefiles="$newdlprefiles $deplib"
+	      compile_deplibs="$deplib $compile_deplibs"
+	      finalize_deplibs="$deplib $finalize_deplibs"
+	    else
+	      newdlfiles="$newdlfiles $deplib"
+	    fi
+	  fi
+	  continue
+	  ;;
+	%DEPLIBS%)
+	  alldeplibs=yes
+	  continue
+	  ;;
+	esac # case $deplib
+	if test "$found" = yes || test -f "$lib"; then :
+	else
+	  $echo "$modename: cannot find the library \`$lib' or unhandled argument \`$deplib'" 1>&2
+	  exit $EXIT_FAILURE
+	fi
+
+	# Check to see that this really is a libtool archive.
+	if (${SED} -e '2q' $lib | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
+	else
+	  $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
+	  exit $EXIT_FAILURE
+	fi
+
+	ladir=`$echo "X$lib" | $Xsed -e 's%/[^/]*$%%'`
+	test "X$ladir" = "X$lib" && ladir="."
+
+	dlname=
+	dlopen=
+	dlpreopen=
+	libdir=
+	library_names=
+	old_library=
+	# If the library was installed with an old release of libtool,
+	# it will not redefine variables installed, or shouldnotlink
+	installed=yes
+	shouldnotlink=no
+	avoidtemprpath=
+
+
+	# Read the .la file
+	case $lib in
+	*/* | *\\*) . $lib ;;
+	*) . ./$lib ;;
+	esac
+
+	if test "$linkmode,$pass" = "lib,link" ||
+	   test "$linkmode,$pass" = "prog,scan" ||
+	   { test "$linkmode" != prog && test "$linkmode" != lib; }; then
+	  test -n "$dlopen" && dlfiles="$dlfiles $dlopen"
+	  test -n "$dlpreopen" && dlprefiles="$dlprefiles $dlpreopen"
+	fi
+
+	if test "$pass" = conv; then
+	  # Only check for convenience libraries
+	  deplibs="$lib $deplibs"
+	  if test -z "$libdir"; then
+	    if test -z "$old_library"; then
+	      $echo "$modename: cannot find name of link library for \`$lib'" 1>&2
+	      exit $EXIT_FAILURE
+	    fi
+	    # It is a libtool convenience library, so add in its objects.
+	    convenience="$convenience $ladir/$objdir/$old_library"
+	    old_convenience="$old_convenience $ladir/$objdir/$old_library"
+	    tmp_libs=
+	    for deplib in $dependency_libs; do
+	      deplibs="$deplib $deplibs"
+              if test "X$duplicate_deps" = "Xyes" ; then
+	        case "$tmp_libs " in
+	        *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
+	        esac
+              fi
+	      tmp_libs="$tmp_libs $deplib"
+	    done
+	  elif test "$linkmode" != prog && test "$linkmode" != lib; then
+	    $echo "$modename: \`$lib' is not a convenience library" 1>&2
+	    exit $EXIT_FAILURE
+	  fi
+	  continue
+	fi # $pass = conv
+
+
+	# Get the name of the library we link against.
+	linklib=
+	for l in $old_library $library_names; do
+	  linklib="$l"
+	done
+	if test -z "$linklib"; then
+	  $echo "$modename: cannot find name of link library for \`$lib'" 1>&2
+	  exit $EXIT_FAILURE
+	fi
+
+	# This library was specified with -dlopen.
+	if test "$pass" = dlopen; then
+	  if test -z "$libdir"; then
+	    $echo "$modename: cannot -dlopen a convenience library: \`$lib'" 1>&2
+	    exit $EXIT_FAILURE
+	  fi
+	  if test -z "$dlname" ||
+	     test "$dlopen_support" != yes ||
+	     test "$build_libtool_libs" = no; then
+	    # If there is no dlname, no dlopen support or we're linking
+	    # statically, we need to preload.  We also need to preload any
+	    # dependent libraries so libltdl's deplib preloader doesn't
+	    # bomb out in the load deplibs phase.
+	    dlprefiles="$dlprefiles $lib $dependency_libs"
+	  else
+	    newdlfiles="$newdlfiles $lib"
+	  fi
+	  continue
+	fi # $pass = dlopen
+
+	# We need an absolute path.
+	case $ladir in
+	[\\/]* | [A-Za-z]:[\\/]*) abs_ladir="$ladir" ;;
+	*)
+	  abs_ladir=`cd "$ladir" && pwd`
+	  if test -z "$abs_ladir"; then
+	    $echo "$modename: warning: cannot determine absolute directory name of \`$ladir'" 1>&2
+	    $echo "$modename: passing it literally to the linker, although it might fail" 1>&2
+	    abs_ladir="$ladir"
+	  fi
+	  ;;
+	esac
+	laname=`$echo "X$lib" | $Xsed -e 's%^.*/%%'`
+
+	# Find the relevant object directory and library name.
+	if test "X$installed" = Xyes; then
+	  if test ! -f "$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then
+	    $echo "$modename: warning: library \`$lib' was moved." 1>&2
+	    dir="$ladir"
+	    absdir="$abs_ladir"
+	    libdir="$abs_ladir"
+	  else
+	    dir="$libdir"
+	    absdir="$libdir"
+	  fi
+	  test "X$hardcode_automatic" = Xyes && avoidtemprpath=yes
+	else
+	  if test ! -f "$ladir/$objdir/$linklib" && test -f "$abs_ladir/$linklib"; then
+	    dir="$ladir"
+	    absdir="$abs_ladir"
+	    # Remove this search path later
+	    notinst_path="$notinst_path $abs_ladir"
+	  else
+	    dir="$ladir/$objdir"
+	    absdir="$abs_ladir/$objdir"
+	    # Remove this search path later
+	    notinst_path="$notinst_path $abs_ladir"
+	  fi
+	fi # $installed = yes
+	name=`$echo "X$laname" | $Xsed -e 's/\.la$//' -e 's/^lib//'`
+
+	# This library was specified with -dlpreopen.
+	if test "$pass" = dlpreopen; then
+	  if test -z "$libdir"; then
+	    $echo "$modename: cannot -dlpreopen a convenience library: \`$lib'" 1>&2
+	    exit $EXIT_FAILURE
+	  fi
+	  # Prefer using a static library (so that no silly _DYNAMIC symbols
+	  # are required to link).
+	  if test -n "$old_library"; then
+	    newdlprefiles="$newdlprefiles $dir/$old_library"
+	  # Otherwise, use the dlname, so that lt_dlopen finds it.
+	  elif test -n "$dlname"; then
+	    newdlprefiles="$newdlprefiles $dir/$dlname"
+	  else
+	    newdlprefiles="$newdlprefiles $dir/$linklib"
+	  fi
+	fi # $pass = dlpreopen
+
+	if test -z "$libdir"; then
+	  # Link the convenience library
+	  if test "$linkmode" = lib; then
+	    deplibs="$dir/$old_library $deplibs"
+	  elif test "$linkmode,$pass" = "prog,link"; then
+	    compile_deplibs="$dir/$old_library $compile_deplibs"
+	    finalize_deplibs="$dir/$old_library $finalize_deplibs"
+	  else
+	    deplibs="$lib $deplibs" # used for prog,scan pass
+	  fi
+	  continue
+	fi
+
+
+	if test "$linkmode" = prog && test "$pass" != link; then
+	  newlib_search_path="$newlib_search_path $ladir"
+	  deplibs="$lib $deplibs"
+
+	  linkalldeplibs=no
+	  if test "$link_all_deplibs" != no || test -z "$library_names" ||
+	     test "$build_libtool_libs" = no; then
+	    linkalldeplibs=yes
+	  fi
+
+	  tmp_libs=
+	  for deplib in $dependency_libs; do
+	    case $deplib in
+	    -L*) newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`;; ### testsuite: skip nested quoting test
+	    esac
+	    # Need to link against all dependency_libs?
+	    if test "$linkalldeplibs" = yes; then
+	      deplibs="$deplib $deplibs"
+	    else
+	      # Need to hardcode shared library paths
+	      # or/and link against static libraries
+	      newdependency_libs="$deplib $newdependency_libs"
+	    fi
+	    if test "X$duplicate_deps" = "Xyes" ; then
+	      case "$tmp_libs " in
+	      *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
+	      esac
+	    fi
+	    tmp_libs="$tmp_libs $deplib"
+	  done # for deplib
+	  continue
+	fi # $linkmode = prog...
+
+	if test "$linkmode,$pass" = "prog,link"; then
+	  if test -n "$library_names" &&
+	     { { test "$prefer_static_libs" = no ||
+		 test "$prefer_static_libs,$installed" = "built,yes"; } ||
+	       test -z "$old_library"; }; then
+	    # We need to hardcode the library path
+	    if test -n "$shlibpath_var" && test -z "$avoidtemprpath" ; then
+	      # Make sure the rpath contains only unique directories.
+	      case "$temp_rpath " in
+	      *" $dir "*) ;;
+	      *" $absdir "*) ;;
+	      *) temp_rpath="$temp_rpath $absdir" ;;
+	      esac
+	    fi
+
+	    # Hardcode the library path.
+	    # Skip directories that are in the system default run-time
+	    # search path.
+	    case " $sys_lib_dlsearch_path " in
+	    *" $absdir "*) ;;
+	    *)
+	      case "$compile_rpath " in
+	      *" $absdir "*) ;;
+	      *) compile_rpath="$compile_rpath $absdir"
+	      esac
+	      ;;
+	    esac
+	    case " $sys_lib_dlsearch_path " in
+	    *" $libdir "*) ;;
+	    *)
+	      case "$finalize_rpath " in
+	      *" $libdir "*) ;;
+	      *) finalize_rpath="$finalize_rpath $libdir"
+	      esac
+	      ;;
+	    esac
+	  fi # $linkmode,$pass = prog,link...
+
+	  if test "$alldeplibs" = yes &&
+	     { test "$deplibs_check_method" = pass_all ||
+	       { test "$build_libtool_libs" = yes &&
+		 test -n "$library_names"; }; }; then
+	    # We only need to search for static libraries
+	    continue
+	  fi
+	fi
+
+	link_static=no # Whether the deplib will be linked statically
+	use_static_libs=$prefer_static_libs
+	if test "$use_static_libs" = built && test "$installed" = yes ; then
+	  use_static_libs=no
+	fi
+	if test -n "$library_names" &&
+	   { test "$use_static_libs" = no || test -z "$old_library"; }; then
+	  if test "$installed" = no; then
+	    notinst_deplibs="$notinst_deplibs $lib"
+	    need_relink=yes
+	  fi
+	  # This is a shared library
+
+	  # Warn about portability, can't link against -module's on
+	  # some systems (darwin)
+	  if test "$shouldnotlink" = yes && test "$pass" = link ; then
+	    $echo
+	    if test "$linkmode" = prog; then
+	      $echo "*** Warning: Linking the executable $output against the loadable module"
+	    else
+	      $echo "*** Warning: Linking the shared library $output against the loadable module"
+	    fi
+	    $echo "*** $linklib is not portable!"
+	  fi
+	  if test "$linkmode" = lib &&
+	     test "$hardcode_into_libs" = yes; then
+	    # Hardcode the library path.
+	    # Skip directories that are in the system default run-time
+	    # search path.
+	    case " $sys_lib_dlsearch_path " in
+	    *" $absdir "*) ;;
+	    *)
+	      case "$compile_rpath " in
+	      *" $absdir "*) ;;
+	      *) compile_rpath="$compile_rpath $absdir"
+	      esac
+	      ;;
+	    esac
+	    case " $sys_lib_dlsearch_path " in
+	    *" $libdir "*) ;;
+	    *)
+	      case "$finalize_rpath " in
+	      *" $libdir "*) ;;
+	      *) finalize_rpath="$finalize_rpath $libdir"
+	      esac
+	      ;;
+	    esac
+	  fi
+
+	  if test -n "$old_archive_from_expsyms_cmds"; then
+	    # figure out the soname
+	    set dummy $library_names
+	    realname="$2"
+	    shift; shift
+	    libname=`eval \\$echo \"$libname_spec\"`
+	    # use dlname if we got it. it's perfectly good, no?
+	    if test -n "$dlname"; then
+	      soname="$dlname"
+	    elif test -n "$soname_spec"; then
+	      # bleh windows
+	      case $host in
+	      *cygwin* | mingw*)
+		major=`expr $current - $age`
+		versuffix="-$major"
+		;;
+	      esac
+	      eval soname=\"$soname_spec\"
+	    else
+	      soname="$realname"
+	    fi
+
+	    # Make a new name for the extract_expsyms_cmds to use
+	    soroot="$soname"
+	    soname=`$echo $soroot | ${SED} -e 's/^.*\///'`
+	    newlib="libimp-`$echo $soname | ${SED} 's/^lib//;s/\.dll$//'`.a"
+
+	    # If the library has no export list, then create one now
+	    if test -f "$output_objdir/$soname-def"; then :
+	    else
+	      $show "extracting exported symbol list from \`$soname'"
+	      save_ifs="$IFS"; IFS='~'
+	      cmds=$extract_expsyms_cmds
+	      for cmd in $cmds; do
+		IFS="$save_ifs"
+		eval cmd=\"$cmd\"
+		$show "$cmd"
+		$run eval "$cmd" || exit $?
+	      done
+	      IFS="$save_ifs"
+	    fi
+
+	    # Create $newlib
+	    if test -f "$output_objdir/$newlib"; then :; else
+	      $show "generating import library for \`$soname'"
+	      save_ifs="$IFS"; IFS='~'
+	      cmds=$old_archive_from_expsyms_cmds
+	      for cmd in $cmds; do
+		IFS="$save_ifs"
+		eval cmd=\"$cmd\"
+		$show "$cmd"
+		$run eval "$cmd" || exit $?
+	      done
+	      IFS="$save_ifs"
+	    fi
+	    # make sure the library variables are pointing to the new library
+	    dir=$output_objdir
+	    linklib=$newlib
+	  fi # test -n "$old_archive_from_expsyms_cmds"
+
+	  if test "$linkmode" = prog || test "$mode" != relink; then
+	    add_shlibpath=
+	    add_dir=
+	    add=
+	    lib_linked=yes
+	    case $hardcode_action in
+	    immediate | unsupported)
+	      if test "$hardcode_direct" = no; then
+		add="$dir/$linklib"
+		case $host in
+		  *-*-sco3.2v5.0.[024]*) add_dir="-L$dir" ;;
+		  *-*-sysv4*uw2*) add_dir="-L$dir" ;;
+		  *-*-sysv5OpenUNIX* | *-*-sysv5UnixWare7.[01].[10]* | \
+		    *-*-unixware7*) add_dir="-L$dir" ;;
+		  *-*-darwin* )
+		    # if the lib is a module then we can not link against
+		    # it, someone is ignoring the new warnings I added
+		    if /usr/bin/file -L $add 2> /dev/null |
+                      $EGREP ": [^:]* bundle" >/dev/null ; then
+		      $echo "** Warning, lib $linklib is a module, not a shared library"
+		      if test -z "$old_library" ; then
+		        $echo
+		        $echo "** And there doesn't seem to be a static archive available"
+		        $echo "** The link will probably fail, sorry"
+		      else
+		        add="$dir/$old_library"
+		      fi
+		    fi
+		esac
+	      elif test "$hardcode_minus_L" = no; then
+		case $host in
+		*-*-sunos*) add_shlibpath="$dir" ;;
+		esac
+		add_dir="-L$dir"
+		add="-l$name"
+	      elif test "$hardcode_shlibpath_var" = no; then
+		add_shlibpath="$dir"
+		add="-l$name"
+	      else
+		lib_linked=no
+	      fi
+	      ;;
+	    relink)
+	      if test "$hardcode_direct" = yes; then
+		add="$dir/$linklib"
+	      elif test "$hardcode_minus_L" = yes; then
+		add_dir="-L$dir"
+		# Try looking first in the location we're being installed to.
+		if test -n "$inst_prefix_dir"; then
+		  case $libdir in
+		    [\\/]*)
+		      add_dir="$add_dir -L$inst_prefix_dir$libdir"
+		      ;;
+		  esac
+		fi
+		add="-l$name"
+	      elif test "$hardcode_shlibpath_var" = yes; then
+		add_shlibpath="$dir"
+		add="-l$name"
+	      else
+		lib_linked=no
+	      fi
+	      ;;
+	    *) lib_linked=no ;;
+	    esac
+
+	    if test "$lib_linked" != yes; then
+	      $echo "$modename: configuration error: unsupported hardcode properties"
+	      exit $EXIT_FAILURE
+	    fi
+
+	    if test -n "$add_shlibpath"; then
+	      case :$compile_shlibpath: in
+	      *":$add_shlibpath:"*) ;;
+	      *) compile_shlibpath="$compile_shlibpath$add_shlibpath:" ;;
+	      esac
+	    fi
+	    if test "$linkmode" = prog; then
+	      test -n "$add_dir" && compile_deplibs="$add_dir $compile_deplibs"
+	      test -n "$add" && compile_deplibs="$add $compile_deplibs"
+	    else
+	      test -n "$add_dir" && deplibs="$add_dir $deplibs"
+	      test -n "$add" && deplibs="$add $deplibs"
+	      if test "$hardcode_direct" != yes && \
+		 test "$hardcode_minus_L" != yes && \
+		 test "$hardcode_shlibpath_var" = yes; then
+		case :$finalize_shlibpath: in
+		*":$libdir:"*) ;;
+		*) finalize_shlibpath="$finalize_shlibpath$libdir:" ;;
+		esac
+	      fi
+	    fi
+	  fi
+
+	  if test "$linkmode" = prog || test "$mode" = relink; then
+	    add_shlibpath=
+	    add_dir=
+	    add=
+	    # Finalize command for both is simple: just hardcode it.
+	    if test "$hardcode_direct" = yes; then
+	      add="$libdir/$linklib"
+	    elif test "$hardcode_minus_L" = yes; then
+	      add_dir="-L$libdir"
+	      add="-l$name"
+	    elif test "$hardcode_shlibpath_var" = yes; then
+	      case :$finalize_shlibpath: in
+	      *":$libdir:"*) ;;
+	      *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;;
+	      esac
+	      add="-l$name"
+	    elif test "$hardcode_automatic" = yes; then
+	      if test -n "$inst_prefix_dir" &&
+		 test -f "$inst_prefix_dir$libdir/$linklib" ; then
+	        add="$inst_prefix_dir$libdir/$linklib"
+	      else
+	        add="$libdir/$linklib"
+	      fi
+	    else
+	      # We cannot seem to hardcode it, guess we'll fake it.
+	      add_dir="-L$libdir"
+	      # Try looking first in the location we're being installed to.
+	      if test -n "$inst_prefix_dir"; then
+		case $libdir in
+		  [\\/]*)
+		    add_dir="$add_dir -L$inst_prefix_dir$libdir"
+		    ;;
+		esac
+	      fi
+	      add="-l$name"
+	    fi
+
+	    if test "$linkmode" = prog; then
+	      test -n "$add_dir" && finalize_deplibs="$add_dir $finalize_deplibs"
+	      test -n "$add" && finalize_deplibs="$add $finalize_deplibs"
+	    else
+	      test -n "$add_dir" && deplibs="$add_dir $deplibs"
+	      test -n "$add" && deplibs="$add $deplibs"
+	    fi
+	  fi
+	elif test "$linkmode" = prog; then
+	  # Here we assume that one of hardcode_direct or hardcode_minus_L
+	  # is not unsupported.  This is valid on all known static and
+	  # shared platforms.
+	  if test "$hardcode_direct" != unsupported; then
+	    test -n "$old_library" && linklib="$old_library"
+	    compile_deplibs="$dir/$linklib $compile_deplibs"
+	    finalize_deplibs="$dir/$linklib $finalize_deplibs"
+	  else
+	    compile_deplibs="-l$name -L$dir $compile_deplibs"
+	    finalize_deplibs="-l$name -L$dir $finalize_deplibs"
+	  fi
+	elif test "$build_libtool_libs" = yes; then
+	  # Not a shared library
+	  if test "$deplibs_check_method" != pass_all; then
+	    # We're trying link a shared library against a static one
+	    # but the system doesn't support it.
+
+	    # Just print a warning and add the library to dependency_libs so
+	    # that the program can be linked against the static library.
+	    $echo
+	    $echo "*** Warning: This system can not link to static lib archive $lib."
+	    $echo "*** I have the capability to make that library automatically link in when"
+	    $echo "*** you link to this library.  But I can only do this if you have a"
+	    $echo "*** shared version of the library, which you do not appear to have."
+	    if test "$module" = yes; then
+	      $echo "*** But as you try to build a module library, libtool will still create "
+	      $echo "*** a static module, that should work as long as the dlopening application"
+	      $echo "*** is linked with the -dlopen flag to resolve symbols at runtime."
+	      if test -z "$global_symbol_pipe"; then
+		$echo
+		$echo "*** However, this would only work if libtool was able to extract symbol"
+		$echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
+		$echo "*** not find such a program.  So, this module is probably useless."
+		$echo "*** \`nm' from GNU binutils and a full rebuild may help."
+	      fi
+	      if test "$build_old_libs" = no; then
+		build_libtool_libs=module
+		build_old_libs=yes
+	      else
+		build_libtool_libs=no
+	      fi
+	    fi
+	  else
+	    deplibs="$dir/$old_library $deplibs"
+	    link_static=yes
+	  fi
+	fi # link shared/static library?
+
+	if test "$linkmode" = lib; then
+	  if test -n "$dependency_libs" &&
+	     { test "$hardcode_into_libs" != yes ||
+	       test "$build_old_libs" = yes ||
+	       test "$link_static" = yes; }; then
+	    # Extract -R from dependency_libs
+	    temp_deplibs=
+	    for libdir in $dependency_libs; do
+	      case $libdir in
+	      -R*) temp_xrpath=`$echo "X$libdir" | $Xsed -e 's/^-R//'`
+		   case " $xrpath " in
+		   *" $temp_xrpath "*) ;;
+		   *) xrpath="$xrpath $temp_xrpath";;
+		   esac;;
+	      *) temp_deplibs="$temp_deplibs $libdir";;
+	      esac
+	    done
+	    dependency_libs="$temp_deplibs"
+	  fi
+
+	  newlib_search_path="$newlib_search_path $absdir"
+	  # Link against this library
+	  test "$link_static" = no && newdependency_libs="$abs_ladir/$laname $newdependency_libs"
+	  # ... and its dependency_libs
+	  tmp_libs=
+	  for deplib in $dependency_libs; do
+	    newdependency_libs="$deplib $newdependency_libs"
+	    if test "X$duplicate_deps" = "Xyes" ; then
+	      case "$tmp_libs " in
+	      *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
+	      esac
+	    fi
+	    tmp_libs="$tmp_libs $deplib"
+	  done
+
+	  if test "$link_all_deplibs" != no; then
+	    # Add the search paths of all dependency libraries
+	    for deplib in $dependency_libs; do
+	      case $deplib in
+	      -L*) path="$deplib" ;;
+	      *.la)
+		dir=`$echo "X$deplib" | $Xsed -e 's%/[^/]*$%%'`
+		test "X$dir" = "X$deplib" && dir="."
+		# We need an absolute path.
+		case $dir in
+		[\\/]* | [A-Za-z]:[\\/]*) absdir="$dir" ;;
+		*)
+		  absdir=`cd "$dir" && pwd`
+		  if test -z "$absdir"; then
+		    $echo "$modename: warning: cannot determine absolute directory name of \`$dir'" 1>&2
+		    absdir="$dir"
+		  fi
+		  ;;
+		esac
+		if grep "^installed=no" $deplib > /dev/null; then
+		  path="$absdir/$objdir"
+		else
+		  eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
+		  if test -z "$libdir"; then
+		    $echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2
+		    exit $EXIT_FAILURE
+		  fi
+		  if test "$absdir" != "$libdir"; then
+		    $echo "$modename: warning: \`$deplib' seems to be moved" 1>&2
+		  fi
+		  path="$absdir"
+		fi
+		depdepl=
+		case $host in
+		*-*-darwin*)
+		  # we do not want to link against static libs,
+		  # but need to link against shared
+		  eval deplibrary_names=`${SED} -n -e 's/^library_names=\(.*\)$/\1/p' $deplib`
+		  eval deplibdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
+		  if test -n "$deplibrary_names" ; then
+		    for tmp in $deplibrary_names ; do
+		      depdepl=$tmp
+		    done
+		    if test -f "$deplibdir/$depdepl" ; then
+		      depdepl="$deplibdir/$depdepl"
+	      	    elif test -f "$path/$depdepl" ; then
+		      depdepl="$path/$depdepl"
+		    else
+		      # Can't find it, oh well...
+		      depdepl=
+		    fi
+		    # do not add paths which are already there
+		    case " $newlib_search_path " in
+		    *" $path "*) ;;
+		    *) newlib_search_path="$newlib_search_path $path";;
+		    esac
+		  fi
+		  path=""
+		  ;;
+		*)
+		  path="-L$path"
+		  ;;
+		esac
+		;;
+	      -l*)
+		case $host in
+		*-*-darwin*)
+		  # Again, we only want to link against shared libraries
+		  eval tmp_libs=`$echo "X$deplib" | $Xsed -e "s,^\-l,,"`
+		  for tmp in $newlib_search_path ; do
+		    if test -f "$tmp/lib$tmp_libs.dylib" ; then
+		      eval depdepl="$tmp/lib$tmp_libs.dylib"
+		      break
+		    fi
+		  done
+		  path=""
+		  ;;
+		*) continue ;;
+		esac
+		;;
+	      *) continue ;;
+	      esac
+	      case " $deplibs " in
+	      *" $path "*) ;;
+	      *) deplibs="$path $deplibs" ;;
+	      esac
+	      case " $deplibs " in
+	      *" $depdepl "*) ;;
+	      *) deplibs="$depdepl $deplibs" ;;
+	      esac
+	    done
+	  fi # link_all_deplibs != no
+	fi # linkmode = lib
+      done # for deplib in $libs
+      dependency_libs="$newdependency_libs"
+      if test "$pass" = dlpreopen; then
+	# Link the dlpreopened libraries before other libraries
+	for deplib in $save_deplibs; do
+	  deplibs="$deplib $deplibs"
+	done
+      fi
+      if test "$pass" != dlopen; then
+	if test "$pass" != conv; then
+	  # Make sure lib_search_path contains only unique directories.
+	  lib_search_path=
+	  for dir in $newlib_search_path; do
+	    case "$lib_search_path " in
+	    *" $dir "*) ;;
+	    *) lib_search_path="$lib_search_path $dir" ;;
+	    esac
+	  done
+	  newlib_search_path=
+	fi
+
+	if test "$linkmode,$pass" != "prog,link"; then
+	  vars="deplibs"
+	else
+	  vars="compile_deplibs finalize_deplibs"
+	fi
+	for var in $vars dependency_libs; do
+	  # Add libraries to $var in reverse order
+	  eval tmp_libs=\"\$$var\"
+	  new_libs=
+	  for deplib in $tmp_libs; do
+	    # FIXME: Pedantically, this is the right thing to do, so
+	    #        that some nasty dependency loop isn't accidentally
+	    #        broken:
+	    #new_libs="$deplib $new_libs"
+	    # Pragmatically, this seems to cause very few problems in
+	    # practice:
+	    case $deplib in
+	    -L*) new_libs="$deplib $new_libs" ;;
+	    -R*) ;;
+	    *)
+	      # And here is the reason: when a library appears more
+	      # than once as an explicit dependence of a library, or
+	      # is implicitly linked in more than once by the
+	      # compiler, it is considered special, and multiple
+	      # occurrences thereof are not removed.  Compare this
+	      # with having the same library being listed as a
+	      # dependency of multiple other libraries: in this case,
+	      # we know (pedantically, we assume) the library does not
+	      # need to be listed more than once, so we keep only the
+	      # last copy.  This is not always right, but it is rare
+	      # enough that we require users that really mean to play
+	      # such unportable linking tricks to link the library
+	      # using -Wl,-lname, so that libtool does not consider it
+	      # for duplicate removal.
+	      case " $specialdeplibs " in
+	      *" $deplib "*) new_libs="$deplib $new_libs" ;;
+	      *)
+		case " $new_libs " in
+		*" $deplib "*) ;;
+		*) new_libs="$deplib $new_libs" ;;
+		esac
+		;;
+	      esac
+	      ;;
+	    esac
+	  done
+	  tmp_libs=
+	  for deplib in $new_libs; do
+	    case $deplib in
+	    -L*)
+	      case " $tmp_libs " in
+	      *" $deplib "*) ;;
+	      *) tmp_libs="$tmp_libs $deplib" ;;
+	      esac
+	      ;;
+	    *) tmp_libs="$tmp_libs $deplib" ;;
+	    esac
+	  done
+	  eval $var=\"$tmp_libs\"
+	done # for var
+      fi
+      # Last step: remove runtime libs from dependency_libs
+      # (they stay in deplibs)
+      tmp_libs=
+      for i in $dependency_libs ; do
+	case " $predeps $postdeps $compiler_lib_search_path " in
+	*" $i "*)
+	  i=""
+	  ;;
+	esac
+	if test -n "$i" ; then
+	  tmp_libs="$tmp_libs $i"
+	fi
+      done
+      dependency_libs=$tmp_libs
+    done # for pass
+    if test "$linkmode" = prog; then
+      dlfiles="$newdlfiles"
+      dlprefiles="$newdlprefiles"
+    fi
+
+    case $linkmode in
+    oldlib)
+      case " $deplibs" in
+      *\ -l* | *\ -L*)
+	$echo "$modename: warning: \`-l' and \`-L' are ignored for archives" 1>&2 ;;
+      esac
+
+      if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
+	$echo "$modename: warning: \`-dlopen' is ignored for archives" 1>&2
+      fi
+
+      if test -n "$rpath"; then
+	$echo "$modename: warning: \`-rpath' is ignored for archives" 1>&2
+      fi
+
+      if test -n "$xrpath"; then
+	$echo "$modename: warning: \`-R' is ignored for archives" 1>&2
+      fi
+
+      if test -n "$vinfo"; then
+	$echo "$modename: warning: \`-version-info/-version-number' is ignored for archives" 1>&2
+      fi
+
+      if test -n "$release"; then
+	$echo "$modename: warning: \`-release' is ignored for archives" 1>&2
+      fi
+
+      if test -n "$export_symbols" || test -n "$export_symbols_regex"; then
+	$echo "$modename: warning: \`-export-symbols' is ignored for archives" 1>&2
+      fi
+
+      # Now set the variables for building old libraries.
+      build_libtool_libs=no
+      oldlibs="$output"
+      objs="$objs$old_deplibs"
+      ;;
+
+    lib)
+      # Make sure we only generate libraries of the form `libNAME.la'.
+      case $outputname in
+      lib*)
+	name=`$echo "X$outputname" | $Xsed -e 's/\.la$//' -e 's/^lib//'`
+	eval shared_ext=\"$shrext_cmds\"
+	eval libname=\"$libname_spec\"
+	;;
+      *)
+	if test "$module" = no; then
+	  $echo "$modename: libtool library \`$output' must begin with \`lib'" 1>&2
+	  $echo "$help" 1>&2
+	  exit $EXIT_FAILURE
+	fi
+	if test "$need_lib_prefix" != no; then
+	  # Add the "lib" prefix for modules if required
+	  name=`$echo "X$outputname" | $Xsed -e 's/\.la$//'`
+	  eval shared_ext=\"$shrext_cmds\"
+	  eval libname=\"$libname_spec\"
+	else
+	  libname=`$echo "X$outputname" | $Xsed -e 's/\.la$//'`
+	fi
+	;;
+      esac
+
+      if test -n "$objs"; then
+	if test "$deplibs_check_method" != pass_all; then
+	  $echo "$modename: cannot build libtool library \`$output' from non-libtool objects on this host:$objs" 2>&1
+	  exit $EXIT_FAILURE
+	else
+	  $echo
+	  $echo "*** Warning: Linking the shared library $output against the non-libtool"
+	  $echo "*** objects $objs is not portable!"
+	  libobjs="$libobjs $objs"
+	fi
+      fi
+
+      if test "$dlself" != no; then
+	$echo "$modename: warning: \`-dlopen self' is ignored for libtool libraries" 1>&2
+      fi
+
+      set dummy $rpath
+      if test "$#" -gt 2; then
+	$echo "$modename: warning: ignoring multiple \`-rpath's for a libtool library" 1>&2
+      fi
+      install_libdir="$2"
+
+      oldlibs=
+      if test -z "$rpath"; then
+	if test "$build_libtool_libs" = yes; then
+	  # Building a libtool convenience library.
+	  # Some compilers have problems with a `.al' extension so
+	  # convenience libraries should have the same extension an
+	  # archive normally would.
+	  oldlibs="$output_objdir/$libname.$libext $oldlibs"
+	  build_libtool_libs=convenience
+	  build_old_libs=yes
+	fi
+
+	if test -n "$vinfo"; then
+	  $echo "$modename: warning: \`-version-info/-version-number' is ignored for convenience libraries" 1>&2
+	fi
+
+	if test -n "$release"; then
+	  $echo "$modename: warning: \`-release' is ignored for convenience libraries" 1>&2
+	fi
+      else
+
+	# Parse the version information argument.
+	save_ifs="$IFS"; IFS=':'
+	set dummy $vinfo 0 0 0
+	IFS="$save_ifs"
+
+	if test -n "$8"; then
+	  $echo "$modename: too many parameters to \`-version-info'" 1>&2
+	  $echo "$help" 1>&2
+	  exit $EXIT_FAILURE
+	fi
+
+	# convert absolute version numbers to libtool ages
+	# this retains compatibility with .la files and attempts
+	# to make the code below a bit more comprehensible
+
+	case $vinfo_number in
+	yes)
+	  number_major="$2"
+	  number_minor="$3"
+	  number_revision="$4"
+	  #
+	  # There are really only two kinds -- those that
+	  # use the current revision as the major version
+	  # and those that subtract age and use age as
+	  # a minor version.  But, then there is irix
+	  # which has an extra 1 added just for fun
+	  #
+	  case $version_type in
+	  darwin|linux|osf|windows|none)
+	    current=`expr $number_major + $number_minor`
+	    age="$number_minor"
+	    revision="$number_revision"
+	    ;;
+	  freebsd-aout|freebsd-elf|sunos)
+	    current="$number_major"
+	    revision="$number_minor"
+	    age="0"
+	    ;;
+	  irix|nonstopux)
+	    current=`expr $number_major + $number_minor`
+	    age="$number_minor"
+	    revision="$number_minor"
+	    lt_irix_increment=no
+	    ;;
+	  esac
+	  ;;
+	no)
+	  current="$2"
+	  revision="$3"
+	  age="$4"
+	  ;;
+	esac
+
+	# Check that each of the things are valid numbers.
+	case $current in
+	0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
+	*)
+	  $echo "$modename: CURRENT \`$current' must be a nonnegative integer" 1>&2
+	  $echo "$modename: \`$vinfo' is not valid version information" 1>&2
+	  exit $EXIT_FAILURE
+	  ;;
+	esac
+
+	case $revision in
+	0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
+	*)
+	  $echo "$modename: REVISION \`$revision' must be a nonnegative integer" 1>&2
+	  $echo "$modename: \`$vinfo' is not valid version information" 1>&2
+	  exit $EXIT_FAILURE
+	  ;;
+	esac
+
+	case $age in
+	0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
+	*)
+	  $echo "$modename: AGE \`$age' must be a nonnegative integer" 1>&2
+	  $echo "$modename: \`$vinfo' is not valid version information" 1>&2
+	  exit $EXIT_FAILURE
+	  ;;
+	esac
+
+	if test "$age" -gt "$current"; then
+	  $echo "$modename: AGE \`$age' is greater than the current interface number \`$current'" 1>&2
+	  $echo "$modename: \`$vinfo' is not valid version information" 1>&2
+	  exit $EXIT_FAILURE
+	fi
+
+	# Calculate the version variables.
+	major=
+	versuffix=
+	verstring=
+	case $version_type in
+	none) ;;
+
+	darwin)
+	  # Like Linux, but with the current version available in
+	  # verstring for coding it into the library header
+	  major=.`expr $current - $age`
+	  versuffix="$major.$age.$revision"
+	  # Darwin ld doesn't like 0 for these options...
+	  minor_current=`expr $current + 1`
+	  xlcverstring="${wl}-compatibility_version ${wl}$minor_current ${wl}-current_version ${wl}$minor_current.$revision"
+	  verstring="-compatibility_version $minor_current -current_version $minor_current.$revision"
+	  ;;
+
+	freebsd-aout)
+	  major=".$current"
+	  versuffix=".$current.$revision";
+	  ;;
+
+	freebsd-elf)
+	  major=".$current"
+	  versuffix=".$current";
+	  ;;
+
+	irix | nonstopux)
+	  if test "X$lt_irix_increment" = "Xno"; then
+	    major=`expr $current - $age`
+	  else
+	    major=`expr $current - $age + 1`
+	  fi
+	  case $version_type in
+	    nonstopux) verstring_prefix=nonstopux ;;
+	    *)         verstring_prefix=sgi ;;
+	  esac
+	  verstring="$verstring_prefix$major.$revision"
+
+	  # Add in all the interfaces that we are compatible with.
+	  loop=$revision
+	  while test "$loop" -ne 0; do
+	    iface=`expr $revision - $loop`
+	    loop=`expr $loop - 1`
+	    verstring="$verstring_prefix$major.$iface:$verstring"
+	  done
+
+	  # Before this point, $major must not contain `.'.
+	  major=.$major
+	  versuffix="$major.$revision"
+	  ;;
+
+	linux)
+	  major=.`expr $current - $age`
+	  versuffix="$major.$age.$revision"
+	  ;;
+
+	osf)
+	  major=.`expr $current - $age`
+	  versuffix=".$current.$age.$revision"
+	  verstring="$current.$age.$revision"
+
+	  # Add in all the interfaces that we are compatible with.
+	  loop=$age
+	  while test "$loop" -ne 0; do
+	    iface=`expr $current - $loop`
+	    loop=`expr $loop - 1`
+	    verstring="$verstring:${iface}.0"
+	  done
+
+	  # Make executables depend on our current version.
+	  verstring="$verstring:${current}.0"
+	  ;;
+
+	sunos)
+	  major=".$current"
+	  versuffix=".$current.$revision"
+	  ;;
+
+	windows)
+	  # Use '-' rather than '.', since we only want one
+	  # extension on DOS 8.3 filesystems.
+	  major=`expr $current - $age`
+	  versuffix="-$major"
+	  ;;
+
+	*)
+	  $echo "$modename: unknown library version type \`$version_type'" 1>&2
+	  $echo "Fatal configuration error.  See the $PACKAGE docs for more information." 1>&2
+	  exit $EXIT_FAILURE
+	  ;;
+	esac
+
+	# Clear the version info if we defaulted, and they specified a release.
+	if test -z "$vinfo" && test -n "$release"; then
+	  major=
+	  case $version_type in
+	  darwin)
+	    # we can't check for "0.0" in archive_cmds due to quoting
+	    # problems, so we reset it completely
+	    verstring=
+	    ;;
+	  *)
+	    verstring="0.0"
+	    ;;
+	  esac
+	  if test "$need_version" = no; then
+	    versuffix=
+	  else
+	    versuffix=".0.0"
+	  fi
+	fi
+
+	# Remove version info from name if versioning should be avoided
+	if test "$avoid_version" = yes && test "$need_version" = no; then
+	  major=
+	  versuffix=
+	  verstring=""
+	fi
+
+	# Check to see if the archive will have undefined symbols.
+	if test "$allow_undefined" = yes; then
+	  if test "$allow_undefined_flag" = unsupported; then
+	    $echo "$modename: warning: undefined symbols not allowed in $host shared libraries" 1>&2
+	    build_libtool_libs=no
+	    build_old_libs=yes
+	  fi
+	else
+	  # Don't allow undefined symbols.
+	  allow_undefined_flag="$no_undefined_flag"
+	fi
+      fi
+
+      if test "$mode" != relink; then
+	# Remove our outputs, but don't remove object files since they
+	# may have been created when compiling PIC objects.
+	removelist=
+	tempremovelist=`$echo "$output_objdir/*"`
+	for p in $tempremovelist; do
+	  case $p in
+	    *.$objext)
+	       ;;
+	    $output_objdir/$outputname | $output_objdir/$libname.* | $output_objdir/${libname}${release}.*)
+	       if test "X$precious_files_regex" != "X"; then
+	         if echo $p | $EGREP -e "$precious_files_regex" >/dev/null 2>&1
+	         then
+		   continue
+		 fi
+	       fi
+	       removelist="$removelist $p"
+	       ;;
+	    *) ;;
+	  esac
+	done
+	if test -n "$removelist"; then
+	  $show "${rm}r $removelist"
+	  $run ${rm}r $removelist
+	fi
+      fi
+
+      # Now set the variables for building old libraries.
+      if test "$build_old_libs" = yes && test "$build_libtool_libs" != convenience ; then
+	oldlibs="$oldlibs $output_objdir/$libname.$libext"
+
+	# Transform .lo files to .o files.
+	oldobjs="$objs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}'$/d' -e "$lo2o" | $NL2SP`
+      fi
+
+      # Eliminate all temporary directories.
+      #for path in $notinst_path; do
+      #	lib_search_path=`$echo "$lib_search_path " | ${SED} -e "s% $path % %g"`
+      #	deplibs=`$echo "$deplibs " | ${SED} -e "s% -L$path % %g"`
+      #	dependency_libs=`$echo "$dependency_libs " | ${SED} -e "s% -L$path % %g"`
+      #done
+
+      if test -n "$xrpath"; then
+	# If the user specified any rpath flags, then add them.
+	temp_xrpath=
+	for libdir in $xrpath; do
+	  temp_xrpath="$temp_xrpath -R$libdir"
+	  case "$finalize_rpath " in
+	  *" $libdir "*) ;;
+	  *) finalize_rpath="$finalize_rpath $libdir" ;;
+	  esac
+	done
+	if test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes; then
+	  dependency_libs="$temp_xrpath $dependency_libs"
+	fi
+      fi
+
+      # Make sure dlfiles contains only unique files that won't be dlpreopened
+      old_dlfiles="$dlfiles"
+      dlfiles=
+      for lib in $old_dlfiles; do
+	case " $dlprefiles $dlfiles " in
+	*" $lib "*) ;;
+	*) dlfiles="$dlfiles $lib" ;;
+	esac
+      done
+
+      # Make sure dlprefiles contains only unique files
+      old_dlprefiles="$dlprefiles"
+      dlprefiles=
+      for lib in $old_dlprefiles; do
+	case "$dlprefiles " in
+	*" $lib "*) ;;
+	*) dlprefiles="$dlprefiles $lib" ;;
+	esac
+      done
+
+      if test "$build_libtool_libs" = yes; then
+	if test -n "$rpath"; then
+	  case $host in
+	  *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos*)
+	    # these systems don't actually have a c library (as such)!
+	    ;;
+	  *-*-rhapsody* | *-*-darwin1.[012])
+	    # Rhapsody C library is in the System framework
+	    deplibs="$deplibs -framework System"
+	    ;;
+	  *-*-netbsd*)
+	    # Don't link with libc until the a.out ld.so is fixed.
+	    ;;
+	  *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
+	    # Do not include libc due to us having libc/libc_r.
+	    ;;
+	  *-*-sco3.2v5* | *-*-sco5v6*)
+	    # Causes problems with __ctype
+	    ;;
+	  *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*)
+	    # Compiler inserts libc in the correct place for threads to work
+	    ;;
+ 	  *)
+	    # Add libc to deplibs on all other systems if necessary.
+	    if test "$build_libtool_need_lc" = "yes"; then
+	      deplibs="$deplibs -lc"
+	    fi
+	    ;;
+	  esac
+	fi
+
+	# Transform deplibs into only deplibs that can be linked in shared.
+	name_save=$name
+	libname_save=$libname
+	release_save=$release
+	versuffix_save=$versuffix
+	major_save=$major
+	# I'm not sure if I'm treating the release correctly.  I think
+	# release should show up in the -l (ie -lgmp5) so we don't want to
+	# add it in twice.  Is that correct?
+	release=""
+	versuffix=""
+	major=""
+	newdeplibs=
+	droppeddeps=no
+	case $deplibs_check_method in
+	pass_all)
+	  # Don't check for shared/static.  Everything works.
+	  # This might be a little naive.  We might want to check
+	  # whether the library exists or not.  But this is on
+	  # osf3 & osf4 and I'm not really sure... Just
+	  # implementing what was already the behavior.
+	  newdeplibs=$deplibs
+	  ;;
+	test_compile)
+	  # This code stresses the "libraries are programs" paradigm to its
+	  # limits. Maybe even breaks it.  We compile a program, linking it
+	  # against the deplibs as a proxy for the library.  Then we can check
+	  # whether they linked in statically or dynamically with ldd.
+	  $rm conftest.c
+	  cat > conftest.c <<EOF
+	  int main() { return 0; }
+EOF
+	  $rm conftest
+	  if $LTCC $LTCFLAGS -o conftest conftest.c $deplibs; then
+	    ldd_output=`ldd conftest`
+	    for i in $deplibs; do
+	      name=`expr $i : '-l\(.*\)'`
+	      # If $name is empty we are operating on a -L argument.
+              if test "$name" != "" && test "$name" != "0"; then
+		if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+		  case " $predeps $postdeps " in
+		  *" $i "*)
+		    newdeplibs="$newdeplibs $i"
+		    i=""
+		    ;;
+		  esac
+	        fi
+		if test -n "$i" ; then
+		  libname=`eval \\$echo \"$libname_spec\"`
+		  deplib_matches=`eval \\$echo \"$library_names_spec\"`
+		  set dummy $deplib_matches
+		  deplib_match=$2
+		  if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
+		    newdeplibs="$newdeplibs $i"
+		  else
+		    droppeddeps=yes
+		    $echo
+		    $echo "*** Warning: dynamic linker does not accept needed library $i."
+		    $echo "*** I have the capability to make that library automatically link in when"
+		    $echo "*** you link to this library.  But I can only do this if you have a"
+		    $echo "*** shared version of the library, which I believe you do not have"
+		    $echo "*** because a test_compile did reveal that the linker did not use it for"
+		    $echo "*** its dynamic dependency list that programs get resolved with at runtime."
+		  fi
+		fi
+	      else
+		newdeplibs="$newdeplibs $i"
+	      fi
+	    done
+	  else
+	    # Error occurred in the first compile.  Let's try to salvage
+	    # the situation: Compile a separate program for each library.
+	    for i in $deplibs; do
+	      name=`expr $i : '-l\(.*\)'`
+	      # If $name is empty we are operating on a -L argument.
+              if test "$name" != "" && test "$name" != "0"; then
+		$rm conftest
+		if $LTCC $LTCFLAGS -o conftest conftest.c $i; then
+		  ldd_output=`ldd conftest`
+		  if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+		    case " $predeps $postdeps " in
+		    *" $i "*)
+		      newdeplibs="$newdeplibs $i"
+		      i=""
+		      ;;
+		    esac
+		  fi
+		  if test -n "$i" ; then
+		    libname=`eval \\$echo \"$libname_spec\"`
+		    deplib_matches=`eval \\$echo \"$library_names_spec\"`
+		    set dummy $deplib_matches
+		    deplib_match=$2
+		    if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
+		      newdeplibs="$newdeplibs $i"
+		    else
+		      droppeddeps=yes
+		      $echo
+		      $echo "*** Warning: dynamic linker does not accept needed library $i."
+		      $echo "*** I have the capability to make that library automatically link in when"
+		      $echo "*** you link to this library.  But I can only do this if you have a"
+		      $echo "*** shared version of the library, which you do not appear to have"
+		      $echo "*** because a test_compile did reveal that the linker did not use this one"
+		      $echo "*** as a dynamic dependency that programs can get resolved with at runtime."
+		    fi
+		  fi
+		else
+		  droppeddeps=yes
+		  $echo
+		  $echo "*** Warning!  Library $i is needed by this library but I was not able to"
+		  $echo "*** make it link in!  You will probably need to install it or some"
+		  $echo "*** library that it depends on before this library will be fully"
+		  $echo "*** functional.  Installing it before continuing would be even better."
+		fi
+	      else
+		newdeplibs="$newdeplibs $i"
+	      fi
+	    done
+	  fi
+	  ;;
+	file_magic*)
+	  set dummy $deplibs_check_method
+	  file_magic_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"`
+	  for a_deplib in $deplibs; do
+	    name=`expr $a_deplib : '-l\(.*\)'`
+	    # If $name is empty we are operating on a -L argument.
+            if test "$name" != "" && test  "$name" != "0"; then
+	      if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+		case " $predeps $postdeps " in
+		*" $a_deplib "*)
+		  newdeplibs="$newdeplibs $a_deplib"
+		  a_deplib=""
+		  ;;
+		esac
+	      fi
+	      if test -n "$a_deplib" ; then
+		libname=`eval \\$echo \"$libname_spec\"`
+		for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
+		  potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
+		  for potent_lib in $potential_libs; do
+		      # Follow soft links.
+		      if ls -lLd "$potent_lib" 2>/dev/null \
+			 | grep " -> " >/dev/null; then
+			continue
+		      fi
+		      # The statement above tries to avoid entering an
+		      # endless loop below, in case of cyclic links.
+		      # We might still enter an endless loop, since a link
+		      # loop can be closed while we follow links,
+		      # but so what?
+		      potlib="$potent_lib"
+		      while test -h "$potlib" 2>/dev/null; do
+			potliblink=`ls -ld $potlib | ${SED} 's/.* -> //'`
+			case $potliblink in
+			[\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";;
+			*) potlib=`$echo "X$potlib" | $Xsed -e 's,[^/]*$,,'`"$potliblink";;
+			esac
+		      done
+		      if eval $file_magic_cmd \"\$potlib\" 2>/dev/null \
+			 | ${SED} 10q \
+			 | $EGREP "$file_magic_regex" > /dev/null; then
+			newdeplibs="$newdeplibs $a_deplib"
+			a_deplib=""
+			break 2
+		      fi
+		  done
+		done
+	      fi
+	      if test -n "$a_deplib" ; then
+		droppeddeps=yes
+		$echo
+		$echo "*** Warning: linker path does not have real file for library $a_deplib."
+		$echo "*** I have the capability to make that library automatically link in when"
+		$echo "*** you link to this library.  But I can only do this if you have a"
+		$echo "*** shared version of the library, which you do not appear to have"
+		$echo "*** because I did check the linker path looking for a file starting"
+		if test -z "$potlib" ; then
+		  $echo "*** with $libname but no candidates were found. (...for file magic test)"
+		else
+		  $echo "*** with $libname and none of the candidates passed a file format test"
+		  $echo "*** using a file magic. Last file checked: $potlib"
+		fi
+	      fi
+	    else
+	      # Add a -L argument.
+	      newdeplibs="$newdeplibs $a_deplib"
+	    fi
+	  done # Gone through all deplibs.
+	  ;;
+	match_pattern*)
+	  set dummy $deplibs_check_method
+	  match_pattern_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"`
+	  for a_deplib in $deplibs; do
+	    name=`expr $a_deplib : '-l\(.*\)'`
+	    # If $name is empty we are operating on a -L argument.
+	    if test -n "$name" && test "$name" != "0"; then
+	      if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+		case " $predeps $postdeps " in
+		*" $a_deplib "*)
+		  newdeplibs="$newdeplibs $a_deplib"
+		  a_deplib=""
+		  ;;
+		esac
+	      fi
+	      if test -n "$a_deplib" ; then
+		libname=`eval \\$echo \"$libname_spec\"`
+		for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
+		  potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
+		  for potent_lib in $potential_libs; do
+		    potlib="$potent_lib" # see symlink-check above in file_magic test
+		    if eval $echo \"$potent_lib\" 2>/dev/null \
+		        | ${SED} 10q \
+		        | $EGREP "$match_pattern_regex" > /dev/null; then
+		      newdeplibs="$newdeplibs $a_deplib"
+		      a_deplib=""
+		      break 2
+		    fi
+		  done
+		done
+	      fi
+	      if test -n "$a_deplib" ; then
+		droppeddeps=yes
+		$echo
+		$echo "*** Warning: linker path does not have real file for library $a_deplib."
+		$echo "*** I have the capability to make that library automatically link in when"
+		$echo "*** you link to this library.  But I can only do this if you have a"
+		$echo "*** shared version of the library, which you do not appear to have"
+		$echo "*** because I did check the linker path looking for a file starting"
+		if test -z "$potlib" ; then
+		  $echo "*** with $libname but no candidates were found. (...for regex pattern test)"
+		else
+		  $echo "*** with $libname and none of the candidates passed a file format test"
+		  $echo "*** using a regex pattern. Last file checked: $potlib"
+		fi
+	      fi
+	    else
+	      # Add a -L argument.
+	      newdeplibs="$newdeplibs $a_deplib"
+	    fi
+	  done # Gone through all deplibs.
+	  ;;
+	none | unknown | *)
+	  newdeplibs=""
+	  tmp_deplibs=`$echo "X $deplibs" | $Xsed -e 's/ -lc$//' \
+	    -e 's/ -[LR][^ ]*//g'`
+	  if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+	    for i in $predeps $postdeps ; do
+	      # can't use Xsed below, because $i might contain '/'
+	      tmp_deplibs=`$echo "X $tmp_deplibs" | ${SED} -e "1s,^X,," -e "s,$i,,"`
+	    done
+	  fi
+	  if $echo "X $tmp_deplibs" | $Xsed -e 's/[ 	]//g' \
+	    | grep . >/dev/null; then
+	    $echo
+	    if test "X$deplibs_check_method" = "Xnone"; then
+	      $echo "*** Warning: inter-library dependencies are not supported in this platform."
+	    else
+	      $echo "*** Warning: inter-library dependencies are not known to be supported."
+	    fi
+	    $echo "*** All declared inter-library dependencies are being dropped."
+	    droppeddeps=yes
+	  fi
+	  ;;
+	esac
+	versuffix=$versuffix_save
+	major=$major_save
+	release=$release_save
+	libname=$libname_save
+	name=$name_save
+
+	case $host in
+	*-*-rhapsody* | *-*-darwin1.[012])
+	  # On Rhapsody replace the C library is the System framework
+	  newdeplibs=`$echo "X $newdeplibs" | $Xsed -e 's/ -lc / -framework System /'`
+	  ;;
+	esac
+
+	if test "$droppeddeps" = yes; then
+	  if test "$module" = yes; then
+	    $echo
+	    $echo "*** Warning: libtool could not satisfy all declared inter-library"
+	    $echo "*** dependencies of module $libname.  Therefore, libtool will create"
+	    $echo "*** a static module, that should work as long as the dlopening"
+	    $echo "*** application is linked with the -dlopen flag."
+	    if test -z "$global_symbol_pipe"; then
+	      $echo
+	      $echo "*** However, this would only work if libtool was able to extract symbol"
+	      $echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
+	      $echo "*** not find such a program.  So, this module is probably useless."
+	      $echo "*** \`nm' from GNU binutils and a full rebuild may help."
+	    fi
+	    if test "$build_old_libs" = no; then
+	      oldlibs="$output_objdir/$libname.$libext"
+	      build_libtool_libs=module
+	      build_old_libs=yes
+	    else
+	      build_libtool_libs=no
+	    fi
+	  else
+	    $echo "*** The inter-library dependencies that have been dropped here will be"
+	    $echo "*** automatically added whenever a program is linked with this library"
+	    $echo "*** or is declared to -dlopen it."
+
+	    if test "$allow_undefined" = no; then
+	      $echo
+	      $echo "*** Since this library must not contain undefined symbols,"
+	      $echo "*** because either the platform does not support them or"
+	      $echo "*** it was explicitly requested with -no-undefined,"
+	      $echo "*** libtool will only create a static version of it."
+	      if test "$build_old_libs" = no; then
+		oldlibs="$output_objdir/$libname.$libext"
+		build_libtool_libs=module
+		build_old_libs=yes
+	      else
+		build_libtool_libs=no
+	      fi
+	    fi
+	  fi
+	fi
+	# Done checking deplibs!
+	deplibs=$newdeplibs
+      fi
+
+
+      # move library search paths that coincide with paths to not yet
+      # installed libraries to the beginning of the library search list
+      new_libs=
+      for path in $notinst_path; do
+	case " $new_libs " in
+	*" -L$path/$objdir "*) ;;
+	*)
+	  case " $deplibs " in
+	  *" -L$path/$objdir "*)
+	    new_libs="$new_libs -L$path/$objdir" ;;
+	  esac
+	  ;;
+	esac
+      done
+      for deplib in $deplibs; do
+	case $deplib in
+	-L*)
+	  case " $new_libs " in
+	  *" $deplib "*) ;;
+	  *) new_libs="$new_libs $deplib" ;;
+	  esac
+	  ;;
+	*) new_libs="$new_libs $deplib" ;;
+	esac
+      done
+      deplibs="$new_libs"
+
+
+      # All the library-specific variables (install_libdir is set above).
+      library_names=
+      old_library=
+      dlname=
+
+      # Test again, we may have decided not to build it any more
+      if test "$build_libtool_libs" = yes; then
+	if test "$hardcode_into_libs" = yes; then
+	  # Hardcode the library paths
+	  hardcode_libdirs=
+	  dep_rpath=
+	  rpath="$finalize_rpath"
+	  test "$mode" != relink && rpath="$compile_rpath$rpath"
+	  for libdir in $rpath; do
+	    if test -n "$hardcode_libdir_flag_spec"; then
+	      if test -n "$hardcode_libdir_separator"; then
+		if test -z "$hardcode_libdirs"; then
+		  hardcode_libdirs="$libdir"
+		else
+		  # Just accumulate the unique libdirs.
+		  case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
+		  *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
+		    ;;
+		  *)
+		    hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
+		    ;;
+		  esac
+		fi
+	      else
+		eval flag=\"$hardcode_libdir_flag_spec\"
+		dep_rpath="$dep_rpath $flag"
+	      fi
+	    elif test -n "$runpath_var"; then
+	      case "$perm_rpath " in
+	      *" $libdir "*) ;;
+	      *) perm_rpath="$perm_rpath $libdir" ;;
+	      esac
+	    fi
+	  done
+	  # Substitute the hardcoded libdirs into the rpath.
+	  if test -n "$hardcode_libdir_separator" &&
+	     test -n "$hardcode_libdirs"; then
+	    libdir="$hardcode_libdirs"
+	    if test -n "$hardcode_libdir_flag_spec_ld"; then
+	      case $archive_cmds in
+	      *\$LD*) eval dep_rpath=\"$hardcode_libdir_flag_spec_ld\" ;;
+	      *)      eval dep_rpath=\"$hardcode_libdir_flag_spec\" ;;
+	      esac
+	    else
+	      eval dep_rpath=\"$hardcode_libdir_flag_spec\"
+	    fi
+	  fi
+	  if test -n "$runpath_var" && test -n "$perm_rpath"; then
+	    # We should set the runpath_var.
+	    rpath=
+	    for dir in $perm_rpath; do
+	      rpath="$rpath$dir:"
+	    done
+	    eval "$runpath_var='$rpath\$$runpath_var'; export $runpath_var"
+	  fi
+	  test -n "$dep_rpath" && deplibs="$dep_rpath $deplibs"
+	fi
+
+	shlibpath="$finalize_shlibpath"
+	test "$mode" != relink && shlibpath="$compile_shlibpath$shlibpath"
+	if test -n "$shlibpath"; then
+	  eval "$shlibpath_var='$shlibpath\$$shlibpath_var'; export $shlibpath_var"
+	fi
+
+	# Get the real and link names of the library.
+	eval shared_ext=\"$shrext_cmds\"
+	eval library_names=\"$library_names_spec\"
+	set dummy $library_names
+	realname="$2"
+	shift; shift
+
+	if test -n "$soname_spec"; then
+	  eval soname=\"$soname_spec\"
+	else
+	  soname="$realname"
+	fi
+	if test -z "$dlname"; then
+	  dlname=$soname
+	fi
+
+	lib="$output_objdir/$realname"
+	linknames=
+	for link
+	do
+	  linknames="$linknames $link"
+	done
+
+	# Use standard objects if they are pic
+	test -z "$pic_flag" && libobjs=`$echo "X$libobjs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
+
+	# Prepare the list of exported symbols
+	if test -z "$export_symbols"; then
+	  if test "$always_export_symbols" = yes || test -n "$export_symbols_regex"; then
+	    $show "generating symbol list for \`$libname.la'"
+	    export_symbols="$output_objdir/$libname.exp"
+	    $run $rm $export_symbols
+	    cmds=$export_symbols_cmds
+	    save_ifs="$IFS"; IFS='~'
+	    for cmd in $cmds; do
+	      IFS="$save_ifs"
+	      eval cmd=\"$cmd\"
+	      if len=`expr "X$cmd" : ".*"` &&
+	       test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then
+	        $show "$cmd"
+	        $run eval "$cmd" || exit $?
+	        skipped_export=false
+	      else
+	        # The command line is too long to execute in one step.
+	        $show "using reloadable object file for export list..."
+	        skipped_export=:
+		# Break out early, otherwise skipped_export may be
+		# set to false by a later but shorter cmd.
+		break
+	      fi
+	    done
+	    IFS="$save_ifs"
+	    if test -n "$export_symbols_regex"; then
+	      $show "$EGREP -e \"$export_symbols_regex\" \"$export_symbols\" > \"${export_symbols}T\""
+	      $run eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"'
+	      $show "$mv \"${export_symbols}T\" \"$export_symbols\""
+	      $run eval '$mv "${export_symbols}T" "$export_symbols"'
+	    fi
+	  fi
+	fi
+
+	if test -n "$export_symbols" && test -n "$include_expsyms"; then
+	  $run eval '$echo "X$include_expsyms" | $SP2NL >> "$export_symbols"'
+	fi
+
+	tmp_deplibs=
+	for test_deplib in $deplibs; do
+		case " $convenience " in
+		*" $test_deplib "*) ;;
+		*)
+			tmp_deplibs="$tmp_deplibs $test_deplib"
+			;;
+		esac
+	done
+	deplibs="$tmp_deplibs"
+
+	if test -n "$convenience"; then
+	  if test -n "$whole_archive_flag_spec"; then
+	    save_libobjs=$libobjs
+	    eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
+	  else
+	    gentop="$output_objdir/${outputname}x"
+	    generated="$generated $gentop"
+
+	    func_extract_archives $gentop $convenience
+	    libobjs="$libobjs $func_extract_archives_result"
+	  fi
+	fi
+	
+	if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then
+	  eval flag=\"$thread_safe_flag_spec\"
+	  linker_flags="$linker_flags $flag"
+	fi
+
+	# Make a backup of the uninstalled library when relinking
+	if test "$mode" = relink; then
+	  $run eval '(cd $output_objdir && $rm ${realname}U && $mv $realname ${realname}U)' || exit $?
+	fi
+
+	# Do each of the archive commands.
+	if test "$module" = yes && test -n "$module_cmds" ; then
+	  if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then
+	    eval test_cmds=\"$module_expsym_cmds\"
+	    cmds=$module_expsym_cmds
+	  else
+	    eval test_cmds=\"$module_cmds\"
+	    cmds=$module_cmds
+	  fi
+	else
+	if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
+	  eval test_cmds=\"$archive_expsym_cmds\"
+	  cmds=$archive_expsym_cmds
+	else
+	  eval test_cmds=\"$archive_cmds\"
+	  cmds=$archive_cmds
+	  fi
+	fi
+
+	if test "X$skipped_export" != "X:" &&
+	   len=`expr "X$test_cmds" : ".*" 2>/dev/null` &&
+	   test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then
+	  :
+	else
+	  # The command line is too long to link in one step, link piecewise.
+	  $echo "creating reloadable object files..."
+
+	  # Save the value of $output and $libobjs because we want to
+	  # use them later.  If we have whole_archive_flag_spec, we
+	  # want to use save_libobjs as it was before
+	  # whole_archive_flag_spec was expanded, because we can't
+	  # assume the linker understands whole_archive_flag_spec.
+	  # This may have to be revisited, in case too many
+	  # convenience libraries get linked in and end up exceeding
+	  # the spec.
+	  if test -z "$convenience" || test -z "$whole_archive_flag_spec"; then
+	    save_libobjs=$libobjs
+	  fi
+	  save_output=$output
+	  output_la=`$echo "X$output" | $Xsed -e "$basename"`
+
+	  # Clear the reloadable object creation command queue and
+	  # initialize k to one.
+	  test_cmds=
+	  concat_cmds=
+	  objlist=
+	  delfiles=
+	  last_robj=
+	  k=1
+	  output=$output_objdir/$output_la-${k}.$objext
+	  # Loop over the list of objects to be linked.
+	  for obj in $save_libobjs
+	  do
+	    eval test_cmds=\"$reload_cmds $objlist $last_robj\"
+	    if test "X$objlist" = X ||
+	       { len=`expr "X$test_cmds" : ".*" 2>/dev/null` &&
+		 test "$len" -le "$max_cmd_len"; }; then
+	      objlist="$objlist $obj"
+	    else
+	      # The command $test_cmds is almost too long, add a
+	      # command to the queue.
+	      if test "$k" -eq 1 ; then
+		# The first file doesn't have a previous command to add.
+		eval concat_cmds=\"$reload_cmds $objlist $last_robj\"
+	      else
+		# All subsequent reloadable object files will link in
+		# the last one created.
+		eval concat_cmds=\"\$concat_cmds~$reload_cmds $objlist $last_robj\"
+	      fi
+	      last_robj=$output_objdir/$output_la-${k}.$objext
+	      k=`expr $k + 1`
+	      output=$output_objdir/$output_la-${k}.$objext
+	      objlist=$obj
+	      len=1
+	    fi
+	  done
+	  # Handle the remaining objects by creating one last
+	  # reloadable object file.  All subsequent reloadable object
+	  # files will link in the last one created.
+	  test -z "$concat_cmds" || concat_cmds=$concat_cmds~
+	  eval concat_cmds=\"\${concat_cmds}$reload_cmds $objlist $last_robj\"
+
+	  if ${skipped_export-false}; then
+	    $show "generating symbol list for \`$libname.la'"
+	    export_symbols="$output_objdir/$libname.exp"
+	    $run $rm $export_symbols
+	    libobjs=$output
+	    # Append the command to create the export file.
+	    eval concat_cmds=\"\$concat_cmds~$export_symbols_cmds\"
+          fi
+
+	  # Set up a command to remove the reloadable object files
+	  # after they are used.
+	  i=0
+	  while test "$i" -lt "$k"
+	  do
+	    i=`expr $i + 1`
+	    delfiles="$delfiles $output_objdir/$output_la-${i}.$objext"
+	  done
+
+	  $echo "creating a temporary reloadable object file: $output"
+
+	  # Loop through the commands generated above and execute them.
+	  save_ifs="$IFS"; IFS='~'
+	  for cmd in $concat_cmds; do
+	    IFS="$save_ifs"
+	    $show "$cmd"
+	    $run eval "$cmd" || exit $?
+	  done
+	  IFS="$save_ifs"
+
+	  libobjs=$output
+	  # Restore the value of output.
+	  output=$save_output
+
+	  if test -n "$convenience" && test -n "$whole_archive_flag_spec"; then
+	    eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
+	  fi
+	  # Expand the library linking commands again to reset the
+	  # value of $libobjs for piecewise linking.
+
+	  # Do each of the archive commands.
+	  if test "$module" = yes && test -n "$module_cmds" ; then
+	    if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then
+	      cmds=$module_expsym_cmds
+	    else
+	      cmds=$module_cmds
+	    fi
+	  else
+	  if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
+	    cmds=$archive_expsym_cmds
+	  else
+	    cmds=$archive_cmds
+	    fi
+	  fi
+
+	  # Append the command to remove the reloadable object files
+	  # to the just-reset $cmds.
+	  eval cmds=\"\$cmds~\$rm $delfiles\"
+	fi
+	save_ifs="$IFS"; IFS='~'
+	for cmd in $cmds; do
+	  IFS="$save_ifs"
+	  eval cmd=\"$cmd\"
+	  $show "$cmd"
+	  $run eval "$cmd" || {
+	    lt_exit=$?
+
+	    # Restore the uninstalled library and exit
+	    if test "$mode" = relink; then
+	      $run eval '(cd $output_objdir && $rm ${realname}T && $mv ${realname}U $realname)'
+	    fi
+
+	    exit $lt_exit
+	  }
+	done
+	IFS="$save_ifs"
+
+	# Restore the uninstalled library and exit
+	if test "$mode" = relink; then
+	  $run eval '(cd $output_objdir && $rm ${realname}T && $mv $realname ${realname}T && $mv "$realname"U $realname)' || exit $?
+
+	  if test -n "$convenience"; then
+	    if test -z "$whole_archive_flag_spec"; then
+	      $show "${rm}r $gentop"
+	      $run ${rm}r "$gentop"
+	    fi
+	  fi
+
+	  exit $EXIT_SUCCESS
+	fi
+
+	# Create links to the real library.
+	for linkname in $linknames; do
+	  if test "$realname" != "$linkname"; then
+	    $show "(cd $output_objdir && $rm $linkname && $LN_S $realname $linkname)"
+	    $run eval '(cd $output_objdir && $rm $linkname && $LN_S $realname $linkname)' || exit $?
+	  fi
+	done
+
+	# If -module or -export-dynamic was specified, set the dlname.
+	if test "$module" = yes || test "$export_dynamic" = yes; then
+	  # On all known operating systems, these are identical.
+	  dlname="$soname"
+	fi
+      fi
+      ;;
+
+    obj)
+      case " $deplibs" in
+      *\ -l* | *\ -L*)
+	$echo "$modename: warning: \`-l' and \`-L' are ignored for objects" 1>&2 ;;
+      esac
+
+      if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
+	$echo "$modename: warning: \`-dlopen' is ignored for objects" 1>&2
+      fi
+
+      if test -n "$rpath"; then
+	$echo "$modename: warning: \`-rpath' is ignored for objects" 1>&2
+      fi
+
+      if test -n "$xrpath"; then
+	$echo "$modename: warning: \`-R' is ignored for objects" 1>&2
+      fi
+
+      if test -n "$vinfo"; then
+	$echo "$modename: warning: \`-version-info' is ignored for objects" 1>&2
+      fi
+
+      if test -n "$release"; then
+	$echo "$modename: warning: \`-release' is ignored for objects" 1>&2
+      fi
+
+      case $output in
+      *.lo)
+	if test -n "$objs$old_deplibs"; then
+	  $echo "$modename: cannot build library object \`$output' from non-libtool objects" 1>&2
+	  exit $EXIT_FAILURE
+	fi
+	libobj="$output"
+	obj=`$echo "X$output" | $Xsed -e "$lo2o"`
+	;;
+      *)
+	libobj=
+	obj="$output"
+	;;
+      esac
+
+      # Delete the old objects.
+      $run $rm $obj $libobj
+
+      # Objects from convenience libraries.  This assumes
+      # single-version convenience libraries.  Whenever we create
+      # different ones for PIC/non-PIC, this we'll have to duplicate
+      # the extraction.
+      reload_conv_objs=
+      gentop=
+      # reload_cmds runs $LD directly, so let us get rid of
+      # -Wl from whole_archive_flag_spec and hope we can get by with
+      # turning comma into space..
+      wl=
+
+      if test -n "$convenience"; then
+	if test -n "$whole_archive_flag_spec"; then
+	  eval tmp_whole_archive_flags=\"$whole_archive_flag_spec\"
+	  reload_conv_objs=$reload_objs\ `$echo "X$tmp_whole_archive_flags" | $Xsed -e 's|,| |g'`
+	else
+	  gentop="$output_objdir/${obj}x"
+	  generated="$generated $gentop"
+
+	  func_extract_archives $gentop $convenience
+	  reload_conv_objs="$reload_objs $func_extract_archives_result"
+	fi
+      fi
+
+      # Create the old-style object.
+      reload_objs="$objs$old_deplibs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}$'/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test
+
+      output="$obj"
+      cmds=$reload_cmds
+      save_ifs="$IFS"; IFS='~'
+      for cmd in $cmds; do
+	IFS="$save_ifs"
+	eval cmd=\"$cmd\"
+	$show "$cmd"
+	$run eval "$cmd" || exit $?
+      done
+      IFS="$save_ifs"
+
+      # Exit if we aren't doing a library object file.
+      if test -z "$libobj"; then
+	if test -n "$gentop"; then
+	  $show "${rm}r $gentop"
+	  $run ${rm}r $gentop
+	fi
+
+	exit $EXIT_SUCCESS
+      fi
+
+      if test "$build_libtool_libs" != yes; then
+	if test -n "$gentop"; then
+	  $show "${rm}r $gentop"
+	  $run ${rm}r $gentop
+	fi
+
+	# Create an invalid libtool object if no PIC, so that we don't
+	# accidentally link it into a program.
+	# $show "echo timestamp > $libobj"
+	# $run eval "echo timestamp > $libobj" || exit $?
+	exit $EXIT_SUCCESS
+      fi
+
+      if test -n "$pic_flag" || test "$pic_mode" != default; then
+	# Only do commands if we really have different PIC objects.
+	reload_objs="$libobjs $reload_conv_objs"
+	output="$libobj"
+	cmds=$reload_cmds
+	save_ifs="$IFS"; IFS='~'
+	for cmd in $cmds; do
+	  IFS="$save_ifs"
+	  eval cmd=\"$cmd\"
+	  $show "$cmd"
+	  $run eval "$cmd" || exit $?
+	done
+	IFS="$save_ifs"
+      fi
+
+      if test -n "$gentop"; then
+	$show "${rm}r $gentop"
+	$run ${rm}r $gentop
+      fi
+
+      exit $EXIT_SUCCESS
+      ;;
+
+    prog)
+      case $host in
+	*cygwin*) output=`$echo $output | ${SED} -e 's,.exe$,,;s,$,.exe,'` ;;
+      esac
+      if test -n "$vinfo"; then
+	$echo "$modename: warning: \`-version-info' is ignored for programs" 1>&2
+      fi
+
+      if test -n "$release"; then
+	$echo "$modename: warning: \`-release' is ignored for programs" 1>&2
+      fi
+
+      if test "$preload" = yes; then
+	if test "$dlopen_support" = unknown && test "$dlopen_self" = unknown &&
+	   test "$dlopen_self_static" = unknown; then
+	  $echo "$modename: warning: \`AC_LIBTOOL_DLOPEN' not used. Assuming no dlopen support."
+	fi
+      fi
+
+      case $host in
+      *-*-rhapsody* | *-*-darwin1.[012])
+	# On Rhapsody replace the C library is the System framework
+	compile_deplibs=`$echo "X $compile_deplibs" | $Xsed -e 's/ -lc / -framework System /'`
+	finalize_deplibs=`$echo "X $finalize_deplibs" | $Xsed -e 's/ -lc / -framework System /'`
+	;;
+      esac
+
+      case $host in
+      *darwin*)
+        # Don't allow lazy linking, it breaks C++ global constructors
+        if test "$tagname" = CXX ; then
+        compile_command="$compile_command ${wl}-bind_at_load"
+        finalize_command="$finalize_command ${wl}-bind_at_load"
+        fi
+        ;;
+      esac
+
+
+      # move library search paths that coincide with paths to not yet
+      # installed libraries to the beginning of the library search list
+      new_libs=
+      for path in $notinst_path; do
+	case " $new_libs " in
+	*" -L$path/$objdir "*) ;;
+	*)
+	  case " $compile_deplibs " in
+	  *" -L$path/$objdir "*)
+	    new_libs="$new_libs -L$path/$objdir" ;;
+	  esac
+	  ;;
+	esac
+      done
+      for deplib in $compile_deplibs; do
+	case $deplib in
+	-L*)
+	  case " $new_libs " in
+	  *" $deplib "*) ;;
+	  *) new_libs="$new_libs $deplib" ;;
+	  esac
+	  ;;
+	*) new_libs="$new_libs $deplib" ;;
+	esac
+      done
+      compile_deplibs="$new_libs"
+
+
+      compile_command="$compile_command $compile_deplibs"
+      finalize_command="$finalize_command $finalize_deplibs"
+
+      if test -n "$rpath$xrpath"; then
+	# If the user specified any rpath flags, then add them.
+	for libdir in $rpath $xrpath; do
+	  # This is the magic to use -rpath.
+	  case "$finalize_rpath " in
+	  *" $libdir "*) ;;
+	  *) finalize_rpath="$finalize_rpath $libdir" ;;
+	  esac
+	done
+      fi
+
+      # Now hardcode the library paths
+      rpath=
+      hardcode_libdirs=
+      for libdir in $compile_rpath $finalize_rpath; do
+	if test -n "$hardcode_libdir_flag_spec"; then
+	  if test -n "$hardcode_libdir_separator"; then
+	    if test -z "$hardcode_libdirs"; then
+	      hardcode_libdirs="$libdir"
+	    else
+	      # Just accumulate the unique libdirs.
+	      case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
+	      *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
+		;;
+	      *)
+		hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
+		;;
+	      esac
+	    fi
+	  else
+	    eval flag=\"$hardcode_libdir_flag_spec\"
+	    rpath="$rpath $flag"
+	  fi
+	elif test -n "$runpath_var"; then
+	  case "$perm_rpath " in
+	  *" $libdir "*) ;;
+	  *) perm_rpath="$perm_rpath $libdir" ;;
+	  esac
+	fi
+	case $host in
+	*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
+	  testbindir=`$echo "X$libdir" | $Xsed -e 's*/lib$*/bin*'`
+	  case :$dllsearchpath: in
+	  *":$libdir:"*) ;;
+	  *) dllsearchpath="$dllsearchpath:$libdir";;
+	  esac
+	  case :$dllsearchpath: in
+	  *":$testbindir:"*) ;;
+	  *) dllsearchpath="$dllsearchpath:$testbindir";;
+	  esac
+	  ;;
+	esac
+      done
+      # Substitute the hardcoded libdirs into the rpath.
+      if test -n "$hardcode_libdir_separator" &&
+	 test -n "$hardcode_libdirs"; then
+	libdir="$hardcode_libdirs"
+	eval rpath=\" $hardcode_libdir_flag_spec\"
+      fi
+      compile_rpath="$rpath"
+
+      rpath=
+      hardcode_libdirs=
+      for libdir in $finalize_rpath; do
+	if test -n "$hardcode_libdir_flag_spec"; then
+	  if test -n "$hardcode_libdir_separator"; then
+	    if test -z "$hardcode_libdirs"; then
+	      hardcode_libdirs="$libdir"
+	    else
+	      # Just accumulate the unique libdirs.
+	      case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
+	      *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
+		;;
+	      *)
+		hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
+		;;
+	      esac
+	    fi
+	  else
+	    eval flag=\"$hardcode_libdir_flag_spec\"
+	    rpath="$rpath $flag"
+	  fi
+	elif test -n "$runpath_var"; then
+	  case "$finalize_perm_rpath " in
+	  *" $libdir "*) ;;
+	  *) finalize_perm_rpath="$finalize_perm_rpath $libdir" ;;
+	  esac
+	fi
+      done
+      # Substitute the hardcoded libdirs into the rpath.
+      if test -n "$hardcode_libdir_separator" &&
+	 test -n "$hardcode_libdirs"; then
+	libdir="$hardcode_libdirs"
+	eval rpath=\" $hardcode_libdir_flag_spec\"
+      fi
+      finalize_rpath="$rpath"
+
+      if test -n "$libobjs" && test "$build_old_libs" = yes; then
+	# Transform all the library objects into standard objects.
+	compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
+	finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
+      fi
+
+      dlsyms=
+      if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
+	if test -n "$NM" && test -n "$global_symbol_pipe"; then
+	  dlsyms="${outputname}S.c"
+	else
+	  $echo "$modename: not configured to extract global symbols from dlpreopened files" 1>&2
+	fi
+      fi
+
+      if test -n "$dlsyms"; then
+	case $dlsyms in
+	"") ;;
+	*.c)
+	  # Discover the nlist of each of the dlfiles.
+	  nlist="$output_objdir/${outputname}.nm"
+
+	  $show "$rm $nlist ${nlist}S ${nlist}T"
+	  $run $rm "$nlist" "${nlist}S" "${nlist}T"
+
+	  # Parse the name list into a source file.
+	  $show "creating $output_objdir/$dlsyms"
+
+	  test -z "$run" && $echo > "$output_objdir/$dlsyms" "\
+/* $dlsyms - symbol resolution table for \`$outputname' dlsym emulation. */
+/* Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP */
+
+#ifdef __cplusplus
+extern \"C\" {
+#endif
+
+/* Prevent the only kind of declaration conflicts we can make. */
+#define lt_preloaded_symbols some_other_symbol
+
+/* External symbol declarations for the compiler. */\
+"
+
+	  if test "$dlself" = yes; then
+	    $show "generating symbol list for \`$output'"
+
+	    test -z "$run" && $echo ': @PROGRAM@ ' > "$nlist"
+
+	    # Add our own program objects to the symbol list.
+	    progfiles=`$echo "X$objs$old_deplibs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
+	    for arg in $progfiles; do
+	      $show "extracting global C symbols from \`$arg'"
+	      $run eval "$NM $arg | $global_symbol_pipe >> '$nlist'"
+	    done
+
+	    if test -n "$exclude_expsyms"; then
+	      $run eval '$EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T'
+	      $run eval '$mv "$nlist"T "$nlist"'
+	    fi
+
+	    if test -n "$export_symbols_regex"; then
+	      $run eval '$EGREP -e "$export_symbols_regex" "$nlist" > "$nlist"T'
+	      $run eval '$mv "$nlist"T "$nlist"'
+	    fi
+
+	    # Prepare the list of exported symbols
+	    if test -z "$export_symbols"; then
+	      export_symbols="$output_objdir/$outputname.exp"
+	      $run $rm $export_symbols
+	      $run eval "${SED} -n -e '/^: @PROGRAM@ $/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"'
+              case $host in
+              *cygwin* | *mingw* )
+	        $run eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
+		$run eval 'cat "$export_symbols" >> "$output_objdir/$outputname.def"'
+                ;;
+              esac
+	    else
+	      $run eval "${SED} -e 's/\([].[*^$]\)/\\\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"'
+	      $run eval 'grep -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T'
+	      $run eval 'mv "$nlist"T "$nlist"'
+              case $host in
+              *cygwin* | *mingw* )
+	        $run eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
+		$run eval 'cat "$nlist" >> "$output_objdir/$outputname.def"'
+                ;;
+              esac
+	    fi
+	  fi
+
+	  for arg in $dlprefiles; do
+	    $show "extracting global C symbols from \`$arg'"
+	    name=`$echo "$arg" | ${SED} -e 's%^.*/%%'`
+	    $run eval '$echo ": $name " >> "$nlist"'
+	    $run eval "$NM $arg | $global_symbol_pipe >> '$nlist'"
+	  done
+
+	  if test -z "$run"; then
+	    # Make sure we have at least an empty file.
+	    test -f "$nlist" || : > "$nlist"
+
+	    if test -n "$exclude_expsyms"; then
+	      $EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T
+	      $mv "$nlist"T "$nlist"
+	    fi
+
+	    # Try sorting and uniquifying the output.
+	    if grep -v "^: " < "$nlist" |
+		if sort -k 3 </dev/null >/dev/null 2>&1; then
+		  sort -k 3
+		else
+		  sort +2
+		fi |
+		uniq > "$nlist"S; then
+	      :
+	    else
+	      grep -v "^: " < "$nlist" > "$nlist"S
+	    fi
+
+	    if test -f "$nlist"S; then
+	      eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$dlsyms"'
+	    else
+	      $echo '/* NONE */' >> "$output_objdir/$dlsyms"
+	    fi
+
+	    $echo >> "$output_objdir/$dlsyms" "\
+
+#undef lt_preloaded_symbols
+
+#if defined (__STDC__) && __STDC__
+# define lt_ptr void *
+#else
+# define lt_ptr char *
+# define const
+#endif
+
+/* The mapping between symbol names and symbols. */
+"
+
+	    case $host in
+	    *cygwin* | *mingw* )
+	  $echo >> "$output_objdir/$dlsyms" "\
+/* DATA imports from DLLs on WIN32 can't be const, because
+   runtime relocations are performed -- see ld's documentation
+   on pseudo-relocs */
+struct {
+"
+	      ;;
+	    * )
+	  $echo >> "$output_objdir/$dlsyms" "\
+const struct {
+"
+	      ;;
+	    esac
+
+
+	  $echo >> "$output_objdir/$dlsyms" "\
+  const char *name;
+  lt_ptr address;
+}
+lt_preloaded_symbols[] =
+{\
+"
+
+	    eval "$global_symbol_to_c_name_address" < "$nlist" >> "$output_objdir/$dlsyms"
+
+	    $echo >> "$output_objdir/$dlsyms" "\
+  {0, (lt_ptr) 0}
+};
+
+/* This works around a problem in FreeBSD linker */
+#ifdef FREEBSD_WORKAROUND
+static const void *lt_preloaded_setup() {
+  return lt_preloaded_symbols;
+}
+#endif
+
+#ifdef __cplusplus
+}
+#endif\
+"
+	  fi
+
+	  pic_flag_for_symtable=
+	  case $host in
+	  # compiling the symbol table file with pic_flag works around
+	  # a FreeBSD bug that causes programs to crash when -lm is
+	  # linked before any other PIC object.  But we must not use
+	  # pic_flag when linking with -static.  The problem exists in
+	  # FreeBSD 2.2.6 and is fixed in FreeBSD 3.1.
+	  *-*-freebsd2*|*-*-freebsd3.0*|*-*-freebsdelf3.0*)
+	    case "$compile_command " in
+	    *" -static "*) ;;
+	    *) pic_flag_for_symtable=" $pic_flag -DFREEBSD_WORKAROUND";;
+	    esac;;
+	  *-*-hpux*)
+	    case "$compile_command " in
+	    *" -static "*) ;;
+	    *) pic_flag_for_symtable=" $pic_flag";;
+	    esac
+	  esac
+
+	  # Now compile the dynamic symbol file.
+	  $show "(cd $output_objdir && $LTCC  $LTCFLAGS -c$no_builtin_flag$pic_flag_for_symtable \"$dlsyms\")"
+	  $run eval '(cd $output_objdir && $LTCC  $LTCFLAGS -c$no_builtin_flag$pic_flag_for_symtable "$dlsyms")' || exit $?
+
+	  # Clean up the generated files.
+	  $show "$rm $output_objdir/$dlsyms $nlist ${nlist}S ${nlist}T"
+	  $run $rm "$output_objdir/$dlsyms" "$nlist" "${nlist}S" "${nlist}T"
+
+	  # Transform the symbol file into the correct name.
+          case $host in
+          *cygwin* | *mingw* )
+            if test -f "$output_objdir/${outputname}.def" ; then
+              compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}.def $output_objdir/${outputname}S.${objext}%" | $NL2SP`
+              finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}.def $output_objdir/${outputname}S.${objext}%" | $NL2SP`
+            else
+              compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%" | $NL2SP`
+              finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%" | $NL2SP`
+             fi
+            ;;
+          * )
+            compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%" | $NL2SP`
+            finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%" | $NL2SP`
+            ;;
+          esac
+	  ;;
+	*)
+	  $echo "$modename: unknown suffix for \`$dlsyms'" 1>&2
+	  exit $EXIT_FAILURE
+	  ;;
+	esac
+      else
+	# We keep going just in case the user didn't refer to
+	# lt_preloaded_symbols.  The linker will fail if global_symbol_pipe
+	# really was required.
+
+	# Nullify the symbol file.
+	compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "s% @SYMFILE@%%" | $NL2SP`
+	finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "s% @SYMFILE@%%" | $NL2SP`
+      fi
+
+      if test "$need_relink" = no || test "$build_libtool_libs" != yes; then
+	# Replace the output file specification.
+	compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e 's%@OUTPUT@%'"$output"'%g' | $NL2SP`
+	link_command="$compile_command$compile_rpath"
+
+	# We have no uninstalled library dependencies, so finalize right now.
+	$show "$link_command"
+	$run eval "$link_command"
+	exit_status=$?
+
+	# Delete the generated files.
+	if test -n "$dlsyms"; then
+	  $show "$rm $output_objdir/${outputname}S.${objext}"
+	  $run $rm "$output_objdir/${outputname}S.${objext}"
+	fi
+
+	exit $exit_status
+      fi
+
+      if test -n "$shlibpath_var"; then
+	# We should set the shlibpath_var
+	rpath=
+	for dir in $temp_rpath; do
+	  case $dir in
+	  [\\/]* | [A-Za-z]:[\\/]*)
+	    # Absolute path.
+	    rpath="$rpath$dir:"
+	    ;;
+	  *)
+	    # Relative path: add a thisdir entry.
+	    rpath="$rpath\$thisdir/$dir:"
+	    ;;
+	  esac
+	done
+	temp_rpath="$rpath"
+      fi
+
+      if test -n "$compile_shlibpath$finalize_shlibpath"; then
+	compile_command="$shlibpath_var=\"$compile_shlibpath$finalize_shlibpath\$$shlibpath_var\" $compile_command"
+      fi
+      if test -n "$finalize_shlibpath"; then
+	finalize_command="$shlibpath_var=\"$finalize_shlibpath\$$shlibpath_var\" $finalize_command"
+      fi
+
+      compile_var=
+      finalize_var=
+      if test -n "$runpath_var"; then
+	if test -n "$perm_rpath"; then
+	  # We should set the runpath_var.
+	  rpath=
+	  for dir in $perm_rpath; do
+	    rpath="$rpath$dir:"
+	  done
+	  compile_var="$runpath_var=\"$rpath\$$runpath_var\" "
+	fi
+	if test -n "$finalize_perm_rpath"; then
+	  # We should set the runpath_var.
+	  rpath=
+	  for dir in $finalize_perm_rpath; do
+	    rpath="$rpath$dir:"
+	  done
+	  finalize_var="$runpath_var=\"$rpath\$$runpath_var\" "
+	fi
+      fi
+
+      if test "$no_install" = yes; then
+	# We don't need to create a wrapper script.
+	link_command="$compile_var$compile_command$compile_rpath"
+	# Replace the output file specification.
+	link_command=`$echo "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'`
+	# Delete the old output file.
+	$run $rm $output
+	# Link the executable and exit
+	$show "$link_command"
+	$run eval "$link_command" || exit $?
+	exit $EXIT_SUCCESS
+      fi
+
+      if test "$hardcode_action" = relink; then
+	# Fast installation is not supported
+	link_command="$compile_var$compile_command$compile_rpath"
+	relink_command="$finalize_var$finalize_command$finalize_rpath"
+
+	$echo "$modename: warning: this platform does not like uninstalled shared libraries" 1>&2
+	$echo "$modename: \`$output' will be relinked during installation" 1>&2
+      else
+	if test "$fast_install" != no; then
+	  link_command="$finalize_var$compile_command$finalize_rpath"
+	  if test "$fast_install" = yes; then
+	    relink_command=`$echo "X$compile_var$compile_command$compile_rpath" | $SP2NL | $Xsed -e 's%@OUTPUT@%\$progdir/\$file%g' | $NL2SP`
+	  else
+	    # fast_install is set to needless
+	    relink_command=
+	  fi
+	else
+	  link_command="$compile_var$compile_command$compile_rpath"
+	  relink_command="$finalize_var$finalize_command$finalize_rpath"
+	fi
+      fi
+
+      # Replace the output file specification.
+      link_command=`$echo "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'`
+
+      # Delete the old output files.
+      $run $rm $output $output_objdir/$outputname $output_objdir/lt-$outputname
+
+      $show "$link_command"
+      $run eval "$link_command" || exit $?
+
+      # Now create the wrapper script.
+      $show "creating $output"
+
+      # Quote the relink command for shipping.
+      if test -n "$relink_command"; then
+	# Preserve any variables that may affect compiler behavior
+	for var in $variables_saved_for_relink; do
+	  if eval test -z \"\${$var+set}\"; then
+	    relink_command="{ test -z \"\${$var+set}\" || unset $var || { $var=; export $var; }; }; $relink_command"
+	  elif eval var_value=\$$var; test -z "$var_value"; then
+	    relink_command="$var=; export $var; $relink_command"
+	  else
+	    var_value=`$echo "X$var_value" | $Xsed -e "$sed_quote_subst"`
+	    relink_command="$var=\"$var_value\"; export $var; $relink_command"
+	  fi
+	done
+	relink_command="(cd `pwd`; $relink_command)"
+	relink_command=`$echo "X$relink_command" | $SP2NL | $Xsed -e "$sed_quote_subst" | $NL2SP`
+      fi
+
+      # Quote $echo for shipping.
+      if test "X$echo" = "X$SHELL $progpath --fallback-echo"; then
+	case $progpath in
+	[\\/]* | [A-Za-z]:[\\/]*) qecho="$SHELL $progpath --fallback-echo";;
+	*) qecho="$SHELL `pwd`/$progpath --fallback-echo";;
+	esac
+	qecho=`$echo "X$qecho" | $Xsed -e "$sed_quote_subst"`
+      else
+	qecho=`$echo "X$echo" | $Xsed -e "$sed_quote_subst"`
+      fi
+
+      # Only actually do things if our run command is non-null.
+      if test -z "$run"; then
+	# win32 will think the script is a binary if it has
+	# a .exe suffix, so we strip it off here.
+	case $output in
+	  *.exe) output=`$echo $output|${SED} 's,.exe$,,'` ;;
+	esac
+	# test for cygwin because mv fails w/o .exe extensions
+	case $host in
+	  *cygwin*)
+	    exeext=.exe
+	    outputname=`$echo $outputname|${SED} 's,.exe$,,'` ;;
+	  *) exeext= ;;
+	esac
+	case $host in
+	  *cygwin* | *mingw* )
+            output_name=`basename $output`
+            output_path=`dirname $output`
+            cwrappersource="$output_path/$objdir/lt-$output_name.c"
+            cwrapper="$output_path/$output_name.exe"
+            $rm $cwrappersource $cwrapper
+            trap "$rm $cwrappersource $cwrapper; exit $EXIT_FAILURE" 1 2 15
+
+	    cat > $cwrappersource <<EOF
+
+/* $cwrappersource - temporary wrapper executable for $objdir/$outputname
+   Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP
+
+   The $output program cannot be directly executed until all the libtool
+   libraries that it depends on are installed.
+
+   This wrapper executable should never be moved out of the build directory.
+   If it is, it will not operate correctly.
+
+   Currently, it simply execs the wrapper *script* "/bin/sh $output",
+   but could eventually absorb all of the scripts functionality and
+   exec $objdir/$outputname directly.
+*/
+EOF
+	    cat >> $cwrappersource<<"EOF"
+#include <stdio.h>
+#include <stdlib.h>
+#include <unistd.h>
+#include <malloc.h>
+#include <stdarg.h>
+#include <assert.h>
+#include <string.h>
+#include <ctype.h>
+#include <sys/stat.h>
+
+#if defined(PATH_MAX)
+# define LT_PATHMAX PATH_MAX
+#elif defined(MAXPATHLEN)
+# define LT_PATHMAX MAXPATHLEN
+#else
+# define LT_PATHMAX 1024
+#endif
+
+#ifndef DIR_SEPARATOR
+# define DIR_SEPARATOR '/'
+# define PATH_SEPARATOR ':'
+#endif
+
+#if defined (_WIN32) || defined (__MSDOS__) || defined (__DJGPP__) || \
+  defined (__OS2__)
+# define HAVE_DOS_BASED_FILE_SYSTEM
+# ifndef DIR_SEPARATOR_2
+#  define DIR_SEPARATOR_2 '\\'
+# endif
+# ifndef PATH_SEPARATOR_2
+#  define PATH_SEPARATOR_2 ';'
+# endif
+#endif
+
+#ifndef DIR_SEPARATOR_2
+# define IS_DIR_SEPARATOR(ch) ((ch) == DIR_SEPARATOR)
+#else /* DIR_SEPARATOR_2 */
+# define IS_DIR_SEPARATOR(ch) \
+        (((ch) == DIR_SEPARATOR) || ((ch) == DIR_SEPARATOR_2))
+#endif /* DIR_SEPARATOR_2 */
+
+#ifndef PATH_SEPARATOR_2
+# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR)
+#else /* PATH_SEPARATOR_2 */
+# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR_2)
+#endif /* PATH_SEPARATOR_2 */
+
+#define XMALLOC(type, num)      ((type *) xmalloc ((num) * sizeof(type)))
+#define XFREE(stale) do { \
+  if (stale) { free ((void *) stale); stale = 0; } \
+} while (0)
+
+/* -DDEBUG is fairly common in CFLAGS.  */
+#undef DEBUG
+#if defined DEBUGWRAPPER
+# define DEBUG(format, ...) fprintf(stderr, format, __VA_ARGS__)
+#else
+# define DEBUG(format, ...)
+#endif
+
+const char *program_name = NULL;
+
+void * xmalloc (size_t num);
+char * xstrdup (const char *string);
+const char * base_name (const char *name);
+char * find_executable(const char *wrapper);
+int    check_executable(const char *path);
+char * strendzap(char *str, const char *pat);
+void lt_fatal (const char *message, ...);
+
+int
+main (int argc, char *argv[])
+{
+  char **newargz;
+  int i;
+
+  program_name = (char *) xstrdup (base_name (argv[0]));
+  DEBUG("(main) argv[0]      : %s\n",argv[0]);
+  DEBUG("(main) program_name : %s\n",program_name);
+  newargz = XMALLOC(char *, argc+2);
+EOF
+
+            cat >> $cwrappersource <<EOF
+  newargz[0] = (char *) xstrdup("$SHELL");
+EOF
+
+            cat >> $cwrappersource <<"EOF"
+  newargz[1] = find_executable(argv[0]);
+  if (newargz[1] == NULL)
+    lt_fatal("Couldn't find %s", argv[0]);
+  DEBUG("(main) found exe at : %s\n",newargz[1]);
+  /* we know the script has the same name, without the .exe */
+  /* so make sure newargz[1] doesn't end in .exe */
+  strendzap(newargz[1],".exe");
+  for (i = 1; i < argc; i++)
+    newargz[i+1] = xstrdup(argv[i]);
+  newargz[argc+1] = NULL;
+
+  for (i=0; i<argc+1; i++)
+  {
+    DEBUG("(main) newargz[%d]   : %s\n",i,newargz[i]);
+    ;
+  }
+
+EOF
+
+            case $host_os in
+              mingw*)
+                cat >> $cwrappersource <<EOF
+  execv("$SHELL",(char const **)newargz);
+EOF
+              ;;
+              *)
+                cat >> $cwrappersource <<EOF
+  execv("$SHELL",newargz);
+EOF
+              ;;
+            esac
+
+            cat >> $cwrappersource <<"EOF"
+  return 127;
+}
+
+void *
+xmalloc (size_t num)
+{
+  void * p = (void *) malloc (num);
+  if (!p)
+    lt_fatal ("Memory exhausted");
+
+  return p;
+}
+
+char *
+xstrdup (const char *string)
+{
+  return string ? strcpy ((char *) xmalloc (strlen (string) + 1), string) : NULL
+;
+}
+
+const char *
+base_name (const char *name)
+{
+  const char *base;
+
+#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
+  /* Skip over the disk name in MSDOS pathnames. */
+  if (isalpha ((unsigned char)name[0]) && name[1] == ':')
+    name += 2;
+#endif
+
+  for (base = name; *name; name++)
+    if (IS_DIR_SEPARATOR (*name))
+      base = name + 1;
+  return base;
+}
+
+int
+check_executable(const char * path)
+{
+  struct stat st;
+
+  DEBUG("(check_executable)  : %s\n", path ? (*path ? path : "EMPTY!") : "NULL!");
+  if ((!path) || (!*path))
+    return 0;
+
+  if ((stat (path, &st) >= 0) &&
+      (
+        /* MinGW & native WIN32 do not support S_IXOTH or S_IXGRP */
+#if defined (S_IXOTH)
+       ((st.st_mode & S_IXOTH) == S_IXOTH) ||
+#endif
+#if defined (S_IXGRP)
+       ((st.st_mode & S_IXGRP) == S_IXGRP) ||
+#endif
+       ((st.st_mode & S_IXUSR) == S_IXUSR))
+      )
+    return 1;
+  else
+    return 0;
+}
+
+/* Searches for the full path of the wrapper.  Returns
+   newly allocated full path name if found, NULL otherwise */
+char *
+find_executable (const char* wrapper)
+{
+  int has_slash = 0;
+  const char* p;
+  const char* p_next;
+  /* static buffer for getcwd */
+  char tmp[LT_PATHMAX + 1];
+  int tmp_len;
+  char* concat_name;
+
+  DEBUG("(find_executable)  : %s\n", wrapper ? (*wrapper ? wrapper : "EMPTY!") : "NULL!");
+
+  if ((wrapper == NULL) || (*wrapper == '\0'))
+    return NULL;
+
+  /* Absolute path? */
+#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
+  if (isalpha ((unsigned char)wrapper[0]) && wrapper[1] == ':')
+  {
+    concat_name = xstrdup (wrapper);
+    if (check_executable(concat_name))
+      return concat_name;
+    XFREE(concat_name);
+  }
+  else
+  {
+#endif
+    if (IS_DIR_SEPARATOR (wrapper[0]))
+    {
+      concat_name = xstrdup (wrapper);
+      if (check_executable(concat_name))
+        return concat_name;
+      XFREE(concat_name);
+    }
+#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
+  }
+#endif
+
+  for (p = wrapper; *p; p++)
+    if (*p == '/')
+    {
+      has_slash = 1;
+      break;
+    }
+  if (!has_slash)
+  {
+    /* no slashes; search PATH */
+    const char* path = getenv ("PATH");
+    if (path != NULL)
+    {
+      for (p = path; *p; p = p_next)
+      {
+        const char* q;
+        size_t p_len;
+        for (q = p; *q; q++)
+          if (IS_PATH_SEPARATOR(*q))
+            break;
+        p_len = q - p;
+        p_next = (*q == '\0' ? q : q + 1);
+        if (p_len == 0)
+        {
+          /* empty path: current directory */
+          if (getcwd (tmp, LT_PATHMAX) == NULL)
+            lt_fatal ("getcwd failed");
+          tmp_len = strlen(tmp);
+          concat_name = XMALLOC(char, tmp_len + 1 + strlen(wrapper) + 1);
+          memcpy (concat_name, tmp, tmp_len);
+          concat_name[tmp_len] = '/';
+          strcpy (concat_name + tmp_len + 1, wrapper);
+        }
+        else
+        {
+          concat_name = XMALLOC(char, p_len + 1 + strlen(wrapper) + 1);
+          memcpy (concat_name, p, p_len);
+          concat_name[p_len] = '/';
+          strcpy (concat_name + p_len + 1, wrapper);
+        }
+        if (check_executable(concat_name))
+          return concat_name;
+        XFREE(concat_name);
+      }
+    }
+    /* not found in PATH; assume curdir */
+  }
+  /* Relative path | not found in path: prepend cwd */
+  if (getcwd (tmp, LT_PATHMAX) == NULL)
+    lt_fatal ("getcwd failed");
+  tmp_len = strlen(tmp);
+  concat_name = XMALLOC(char, tmp_len + 1 + strlen(wrapper) + 1);
+  memcpy (concat_name, tmp, tmp_len);
+  concat_name[tmp_len] = '/';
+  strcpy (concat_name + tmp_len + 1, wrapper);
+
+  if (check_executable(concat_name))
+    return concat_name;
+  XFREE(concat_name);
+  return NULL;
+}
+
+char *
+strendzap(char *str, const char *pat)
+{
+  size_t len, patlen;
+
+  assert(str != NULL);
+  assert(pat != NULL);
+
+  len = strlen(str);
+  patlen = strlen(pat);
+
+  if (patlen <= len)
+  {
+    str += len - patlen;
+    if (strcmp(str, pat) == 0)
+      *str = '\0';
+  }
+  return str;
+}
+
+static void
+lt_error_core (int exit_status, const char * mode,
+          const char * message, va_list ap)
+{
+  fprintf (stderr, "%s: %s: ", program_name, mode);
+  vfprintf (stderr, message, ap);
+  fprintf (stderr, ".\n");
+
+  if (exit_status >= 0)
+    exit (exit_status);
+}
+
+void
+lt_fatal (const char *message, ...)
+{
+  va_list ap;
+  va_start (ap, message);
+  lt_error_core (EXIT_FAILURE, "FATAL", message, ap);
+  va_end (ap);
+}
+EOF
+          # we should really use a build-platform specific compiler
+          # here, but OTOH, the wrappers (shell script and this C one)
+          # are only useful if you want to execute the "real" binary.
+          # Since the "real" binary is built for $host, then this
+          # wrapper might as well be built for $host, too.
+          $run $LTCC $LTCFLAGS -s -o $cwrapper $cwrappersource
+          ;;
+        esac
+        $rm $output
+        trap "$rm $output; exit $EXIT_FAILURE" 1 2 15
+
+	$echo > $output "\
+#! $SHELL
+
+# $output - temporary wrapper script for $objdir/$outputname
+# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP
+#
+# The $output program cannot be directly executed until all the libtool
+# libraries that it depends on are installed.
+#
+# This wrapper script should never be moved out of the build directory.
+# If it is, it will not operate correctly.
+
+# Sed substitution that helps us do robust quoting.  It backslashifies
+# metacharacters that are still active within double-quoted strings.
+Xsed='${SED} -e 1s/^X//'
+sed_quote_subst='$sed_quote_subst'
+
+# Be Bourne compatible (taken from Autoconf:_AS_BOURNE_COMPATIBLE).
+if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then
+  emulate sh
+  NULLCMD=:
+  # Zsh 3.x and 4.x performs word splitting on \${1+\"\$@\"}, which
+  # is contrary to our usage.  Disable this feature.
+  alias -g '\${1+\"\$@\"}'='\"\$@\"'
+  setopt NO_GLOB_SUBST
+else
+  case \`(set -o) 2>/dev/null\` in *posix*) set -o posix;; esac
+fi
+BIN_SH=xpg4; export BIN_SH # for Tru64
+DUALCASE=1; export DUALCASE # for MKS sh
+
+# The HP-UX ksh and POSIX shell print the target directory to stdout
+# if CDPATH is set.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+relink_command=\"$relink_command\"
+
+# This environment variable determines our operation mode.
+if test \"\$libtool_install_magic\" = \"$magic\"; then
+  # install mode needs the following variable:
+  notinst_deplibs='$notinst_deplibs'
+else
+  # When we are sourced in execute mode, \$file and \$echo are already set.
+  if test \"\$libtool_execute_magic\" != \"$magic\"; then
+    echo=\"$qecho\"
+    file=\"\$0\"
+    # Make sure echo works.
+    if test \"X\$1\" = X--no-reexec; then
+      # Discard the --no-reexec flag, and continue.
+      shift
+    elif test \"X\`(\$echo '\t') 2>/dev/null\`\" = 'X\t'; then
+      # Yippee, \$echo works!
+      :
+    else
+      # Restart under the correct shell, and then maybe \$echo will work.
+      exec $SHELL \"\$0\" --no-reexec \${1+\"\$@\"}
+    fi
+  fi\
+"
+	$echo >> $output "\
+
+  # Find the directory that this script lives in.
+  thisdir=\`\$echo \"X\$file\" | \$Xsed -e 's%/[^/]*$%%'\`
+  test \"x\$thisdir\" = \"x\$file\" && thisdir=.
+
+  # Follow symbolic links until we get to the real thisdir.
+  file=\`ls -ld \"\$file\" | ${SED} -n 's/.*-> //p'\`
+  while test -n \"\$file\"; do
+    destdir=\`\$echo \"X\$file\" | \$Xsed -e 's%/[^/]*\$%%'\`
+
+    # If there was a directory component, then change thisdir.
+    if test \"x\$destdir\" != \"x\$file\"; then
+      case \"\$destdir\" in
+      [\\\\/]* | [A-Za-z]:[\\\\/]*) thisdir=\"\$destdir\" ;;
+      *) thisdir=\"\$thisdir/\$destdir\" ;;
+      esac
+    fi
+
+    file=\`\$echo \"X\$file\" | \$Xsed -e 's%^.*/%%'\`
+    file=\`ls -ld \"\$thisdir/\$file\" | ${SED} -n 's/.*-> //p'\`
+  done
+
+  # Try to get the absolute directory name.
+  absdir=\`cd \"\$thisdir\" && pwd\`
+  test -n \"\$absdir\" && thisdir=\"\$absdir\"
+"
+
+	if test "$fast_install" = yes; then
+	  $echo >> $output "\
+  program=lt-'$outputname'$exeext
+  progdir=\"\$thisdir/$objdir\"
+
+  if test ! -f \"\$progdir/\$program\" || \\
+     { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | ${SED} 1q\`; \\
+       test \"X\$file\" != \"X\$progdir/\$program\"; }; then
+
+    file=\"\$\$-\$program\"
+
+    if test ! -d \"\$progdir\"; then
+      $mkdir \"\$progdir\"
+    else
+      $rm \"\$progdir/\$file\"
+    fi"
+
+	  $echo >> $output "\
+
+    # relink executable if necessary
+    if test -n \"\$relink_command\"; then
+      if relink_command_output=\`eval \$relink_command 2>&1\`; then :
+      else
+	$echo \"\$relink_command_output\" >&2
+	$rm \"\$progdir/\$file\"
+	exit $EXIT_FAILURE
+      fi
+    fi
+
+    $mv \"\$progdir/\$file\" \"\$progdir/\$program\" 2>/dev/null ||
+    { $rm \"\$progdir/\$program\";
+      $mv \"\$progdir/\$file\" \"\$progdir/\$program\"; }
+    $rm \"\$progdir/\$file\"
+  fi"
+	else
+	  $echo >> $output "\
+  program='$outputname'
+  progdir=\"\$thisdir/$objdir\"
+"
+	fi
+
+	$echo >> $output "\
+
+  if test -f \"\$progdir/\$program\"; then"
+
+	# Export our shlibpath_var if we have one.
+	if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
+	  $echo >> $output "\
+    # Add our own library path to $shlibpath_var
+    $shlibpath_var=\"$temp_rpath\$$shlibpath_var\"
+
+    # Some systems cannot cope with colon-terminated $shlibpath_var
+    # The second colon is a workaround for a bug in BeOS R4 sed
+    $shlibpath_var=\`\$echo \"X\$$shlibpath_var\" | \$Xsed -e 's/::*\$//'\`
+
+    export $shlibpath_var
+"
+	fi
+
+	# fixup the dll searchpath if we need to.
+	if test -n "$dllsearchpath"; then
+	  $echo >> $output "\
+    # Add the dll search path components to the executable PATH
+    PATH=$dllsearchpath:\$PATH
+"
+	fi
+
+	$echo >> $output "\
+    if test \"\$libtool_execute_magic\" != \"$magic\"; then
+      # Run the actual program with our arguments.
+
+      # Make sure env LD_LIBRARY_PATH does not mess us up
+      if test -n \"\${LD_LIBRARY_PATH+set}\"; then
+        export LD_LIBRARY_PATH=\$progdir:\$LD_LIBRARY_PATH
+      fi
+"
+	case $host in
+	# Backslashes separate directories on plain windows
+	*-*-mingw | *-*-os2*)
+	  $echo >> $output "\
+      exec \"\$progdir\\\\\$program\" \${1+\"\$@\"}
+"
+	  ;;
+
+	*)
+	  $echo >> $output "\
+      exec \"\$progdir/\$program\" \${1+\"\$@\"}
+"
+	  ;;
+	esac
+	$echo >> $output "\
+      \$echo \"\$0: cannot exec \$program \$*\"
+      exit $EXIT_FAILURE
+    fi
+  else
+    # The program doesn't exist.
+    \$echo \"\$0: error: \\\`\$progdir/\$program' does not exist\" 1>&2
+    \$echo \"This script is just a wrapper for \$program.\" 1>&2
+    $echo \"See the $PACKAGE documentation for more information.\" 1>&2
+    exit $EXIT_FAILURE
+  fi
+fi\
+"
+	chmod +x $output
+      fi
+      exit $EXIT_SUCCESS
+      ;;
+    esac
+
+    # See if we need to build an old-fashioned archive.
+    for oldlib in $oldlibs; do
+
+      if test "$build_libtool_libs" = convenience; then
+	oldobjs="$libobjs_save"
+	addlibs="$convenience"
+	build_libtool_libs=no
+      else
+	if test "$build_libtool_libs" = module; then
+	  oldobjs="$libobjs_save"
+	  build_libtool_libs=no
+	else
+	  oldobjs="$old_deplibs $non_pic_objects"
+	fi
+	addlibs="$old_convenience"
+      fi
+
+      if test -n "$addlibs"; then
+	gentop="$output_objdir/${outputname}x"
+	generated="$generated $gentop"
+
+	func_extract_archives $gentop $addlibs
+	oldobjs="$oldobjs $func_extract_archives_result"
+      fi
+
+      # Do each command in the archive commands.
+      if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then
+       cmds=$old_archive_from_new_cmds
+      else
+	# POSIX demands no paths to be encoded in archives.  We have
+	# to avoid creating archives with duplicate basenames if we
+	# might have to extract them afterwards, e.g., when creating a
+	# static archive out of a convenience library, or when linking
+	# the entirety of a libtool archive into another (currently
+	# not supported by libtool).
+	if (for obj in $oldobjs
+	    do
+	      $echo "X$obj" | $Xsed -e 's%^.*/%%'
+	    done | sort | sort -uc >/dev/null 2>&1); then
+	  :
+	else
+	  $echo "copying selected object files to avoid basename conflicts..."
+
+	  if test -z "$gentop"; then
+	    gentop="$output_objdir/${outputname}x"
+	    generated="$generated $gentop"
+
+	    $show "${rm}r $gentop"
+	    $run ${rm}r "$gentop"
+	    $show "$mkdir $gentop"
+	    $run $mkdir "$gentop"
+	    exit_status=$?
+	    if test "$exit_status" -ne 0 && test ! -d "$gentop"; then
+	      exit $exit_status
+	    fi
+	  fi
+
+	  save_oldobjs=$oldobjs
+	  oldobjs=
+	  counter=1
+	  for obj in $save_oldobjs
+	  do
+	    objbase=`$echo "X$obj" | $Xsed -e 's%^.*/%%'`
+	    case " $oldobjs " in
+	    " ") oldobjs=$obj ;;
+	    *[\ /]"$objbase "*)
+	      while :; do
+		# Make sure we don't pick an alternate name that also
+		# overlaps.
+		newobj=lt$counter-$objbase
+		counter=`expr $counter + 1`
+		case " $oldobjs " in
+		*[\ /]"$newobj "*) ;;
+		*) if test ! -f "$gentop/$newobj"; then break; fi ;;
+		esac
+	      done
+	      $show "ln $obj $gentop/$newobj || cp $obj $gentop/$newobj"
+	      $run ln "$obj" "$gentop/$newobj" ||
+	      $run cp "$obj" "$gentop/$newobj"
+	      oldobjs="$oldobjs $gentop/$newobj"
+	      ;;
+	    *) oldobjs="$oldobjs $obj" ;;
+	    esac
+	  done
+	fi
+
+	eval cmds=\"$old_archive_cmds\"
+
+	if len=`expr "X$cmds" : ".*"` &&
+	     test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then
+	  cmds=$old_archive_cmds
+	else
+	  # the command line is too long to link in one step, link in parts
+	  $echo "using piecewise archive linking..."
+	  save_RANLIB=$RANLIB
+	  RANLIB=:
+	  objlist=
+	  concat_cmds=
+	  save_oldobjs=$oldobjs
+
+	  # Is there a better way of finding the last object in the list?
+	  for obj in $save_oldobjs
+	  do
+	    last_oldobj=$obj
+	  done
+	  for obj in $save_oldobjs
+	  do
+	    oldobjs="$objlist $obj"
+	    objlist="$objlist $obj"
+	    eval test_cmds=\"$old_archive_cmds\"
+	    if len=`expr "X$test_cmds" : ".*" 2>/dev/null` &&
+	       test "$len" -le "$max_cmd_len"; then
+	      :
+	    else
+	      # the above command should be used before it gets too long
+	      oldobjs=$objlist
+	      if test "$obj" = "$last_oldobj" ; then
+	        RANLIB=$save_RANLIB
+	      fi
+	      test -z "$concat_cmds" || concat_cmds=$concat_cmds~
+	      eval concat_cmds=\"\${concat_cmds}$old_archive_cmds\"
+	      objlist=
+	    fi
+	  done
+	  RANLIB=$save_RANLIB
+	  oldobjs=$objlist
+	  if test "X$oldobjs" = "X" ; then
+	    eval cmds=\"\$concat_cmds\"
+	  else
+	    eval cmds=\"\$concat_cmds~\$old_archive_cmds\"
+	  fi
+	fi
+      fi
+      save_ifs="$IFS"; IFS='~'
+      for cmd in $cmds; do
+        eval cmd=\"$cmd\"
+	IFS="$save_ifs"
+	$show "$cmd"
+	$run eval "$cmd" || exit $?
+      done
+      IFS="$save_ifs"
+    done
+
+    if test -n "$generated"; then
+      $show "${rm}r$generated"
+      $run ${rm}r$generated
+    fi
+
+    # Now create the libtool archive.
+    case $output in
+    *.la)
+      old_library=
+      test "$build_old_libs" = yes && old_library="$libname.$libext"
+      $show "creating $output"
+
+      # Preserve any variables that may affect compiler behavior
+      for var in $variables_saved_for_relink; do
+	if eval test -z \"\${$var+set}\"; then
+	  relink_command="{ test -z \"\${$var+set}\" || unset $var || { $var=; export $var; }; }; $relink_command"
+	elif eval var_value=\$$var; test -z "$var_value"; then
+	  relink_command="$var=; export $var; $relink_command"
+	else
+	  var_value=`$echo "X$var_value" | $Xsed -e "$sed_quote_subst"`
+	  relink_command="$var=\"$var_value\"; export $var; $relink_command"
+	fi
+      done
+      # Quote the link command for shipping.
+      relink_command="(cd `pwd`; $SHELL $progpath $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)"
+      relink_command=`$echo "X$relink_command" | $SP2NL | $Xsed -e "$sed_quote_subst" | $NL2SP`
+      if test "$hardcode_automatic" = yes ; then
+	relink_command=
+      fi
+
+
+      # Only create the output if not a dry run.
+      if test -z "$run"; then
+	for installed in no yes; do
+	  if test "$installed" = yes; then
+	    if test -z "$install_libdir"; then
+	      break
+	    fi
+	    output="$output_objdir/$outputname"i
+	    # Replace all uninstalled libtool libraries with the installed ones
+	    newdependency_libs=
+	    for deplib in $dependency_libs; do
+	      case $deplib in
+	      *.la)
+		name=`$echo "X$deplib" | $Xsed -e 's%^.*/%%'`
+		eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
+		if test -z "$libdir"; then
+		  $echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2
+		  exit $EXIT_FAILURE
+		fi
+		newdependency_libs="$newdependency_libs $libdir/$name"
+		;;
+	      *) newdependency_libs="$newdependency_libs $deplib" ;;
+	      esac
+	    done
+	    dependency_libs="$newdependency_libs"
+	    newdlfiles=
+	    for lib in $dlfiles; do
+	      name=`$echo "X$lib" | $Xsed -e 's%^.*/%%'`
+	      eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
+	      if test -z "$libdir"; then
+		$echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
+		exit $EXIT_FAILURE
+	      fi
+	      newdlfiles="$newdlfiles $libdir/$name"
+	    done
+	    dlfiles="$newdlfiles"
+	    newdlprefiles=
+	    for lib in $dlprefiles; do
+	      name=`$echo "X$lib" | $Xsed -e 's%^.*/%%'`
+	      eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
+	      if test -z "$libdir"; then
+		$echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
+		exit $EXIT_FAILURE
+	      fi
+	      newdlprefiles="$newdlprefiles $libdir/$name"
+	    done
+	    dlprefiles="$newdlprefiles"
+	  else
+	    newdlfiles=
+	    for lib in $dlfiles; do
+	      case $lib in
+		[\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;;
+		*) abs=`pwd`"/$lib" ;;
+	      esac
+	      newdlfiles="$newdlfiles $abs"
+	    done
+	    dlfiles="$newdlfiles"
+	    newdlprefiles=
+	    for lib in $dlprefiles; do
+	      case $lib in
+		[\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;;
+		*) abs=`pwd`"/$lib" ;;
+	      esac
+	      newdlprefiles="$newdlprefiles $abs"
+	    done
+	    dlprefiles="$newdlprefiles"
+	  fi
+	  $rm $output
+	  # place dlname in correct position for cygwin
+	  tdlname=$dlname
+	  case $host,$output,$installed,$module,$dlname in
+	    *cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll) tdlname=../bin/$dlname ;;
+	  esac
+	  $echo > $output "\
+# $outputname - a libtool library file
+# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP
+#
+# Please DO NOT delete this file!
+# It is necessary for linking the library.
+
+# The name that we can dlopen(3).
+dlname='$tdlname'
+
+# Names of this library.
+library_names='$library_names'
+
+# The name of the static archive.
+old_library='$old_library'
+
+# Libraries that this one depends upon.
+dependency_libs='$dependency_libs'
+
+# Version information for $libname.
+current=$current
+age=$age
+revision=$revision
+
+# Is this an already installed library?
+installed=$installed
+
+# Should we warn about portability when linking against -modules?
+shouldnotlink=$module
+
+# Files to dlopen/dlpreopen
+dlopen='$dlfiles'
+dlpreopen='$dlprefiles'
+
+# Directory that this library needs to be installed in:
+libdir='$install_libdir'"
+	  if test "$installed" = no && test "$need_relink" = yes; then
+	    $echo >> $output "\
+relink_command=\"$relink_command\""
+	  fi
+	done
+      fi
+
+      # Do a symbolic link so that the libtool archive can be found in
+      # LD_LIBRARY_PATH before the program is installed.
+      $show "(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)"
+      $run eval '(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)' || exit $?
+      ;;
+    esac
+    exit $EXIT_SUCCESS
+    ;;
+
+  # libtool install mode
+  install)
+    modename="$modename: install"
+
+    # There may be an optional sh(1) argument at the beginning of
+    # install_prog (especially on Windows NT).
+    if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh ||
+       # Allow the use of GNU shtool's install command.
+       $echo "X$nonopt" | grep shtool > /dev/null; then
+      # Aesthetically quote it.
+      arg=`$echo "X$nonopt" | $Xsed -e "$sed_quote_subst"`
+      case $arg in
+      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
+	arg="\"$arg\""
+	;;
+      esac
+      install_prog="$arg "
+      arg="$1"
+      shift
+    else
+      install_prog=
+      arg=$nonopt
+    fi
+
+    # The real first argument should be the name of the installation program.
+    # Aesthetically quote it.
+    arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
+    case $arg in
+    *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
+      arg="\"$arg\""
+      ;;
+    esac
+    install_prog="$install_prog$arg"
+
+    # We need to accept at least all the BSD install flags.
+    dest=
+    files=
+    opts=
+    prev=
+    install_type=
+    isdir=no
+    stripme=
+    for arg
+    do
+      if test -n "$dest"; then
+	files="$files $dest"
+	dest=$arg
+	continue
+      fi
+
+      case $arg in
+      -d) isdir=yes ;;
+      -f) 
+      	case " $install_prog " in
+	*[\\\ /]cp\ *) ;;
+	*) prev=$arg ;;
+	esac
+	;;
+      -g | -m | -o) prev=$arg ;;
+      -s)
+	stripme=" -s"
+	continue
+	;;
+      -*)
+	;;
+      *)
+	# If the previous option needed an argument, then skip it.
+	if test -n "$prev"; then
+	  prev=
+	else
+	  dest=$arg
+	  continue
+	fi
+	;;
+      esac
+
+      # Aesthetically quote the argument.
+      arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
+      case $arg in
+      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
+	arg="\"$arg\""
+	;;
+      esac
+      install_prog="$install_prog $arg"
+    done
+
+    if test -z "$install_prog"; then
+      $echo "$modename: you must specify an install program" 1>&2
+      $echo "$help" 1>&2
+      exit $EXIT_FAILURE
+    fi
+
+    if test -n "$prev"; then
+      $echo "$modename: the \`$prev' option requires an argument" 1>&2
+      $echo "$help" 1>&2
+      exit $EXIT_FAILURE
+    fi
+
+    if test -z "$files"; then
+      if test -z "$dest"; then
+	$echo "$modename: no file or destination specified" 1>&2
+      else
+	$echo "$modename: you must specify a destination" 1>&2
+      fi
+      $echo "$help" 1>&2
+      exit $EXIT_FAILURE
+    fi
+
+    # Strip any trailing slash from the destination.
+    dest=`$echo "X$dest" | $Xsed -e 's%/$%%'`
+
+    # Check to see that the destination is a directory.
+    test -d "$dest" && isdir=yes
+    if test "$isdir" = yes; then
+      destdir="$dest"
+      destname=
+    else
+      destdir=`$echo "X$dest" | $Xsed -e 's%/[^/]*$%%'`
+      test "X$destdir" = "X$dest" && destdir=.
+      destname=`$echo "X$dest" | $Xsed -e 's%^.*/%%'`
+
+      # Not a directory, so check to see that there is only one file specified.
+      set dummy $files
+      if test "$#" -gt 2; then
+	$echo "$modename: \`$dest' is not a directory" 1>&2
+	$echo "$help" 1>&2
+	exit $EXIT_FAILURE
+      fi
+    fi
+    case $destdir in
+    [\\/]* | [A-Za-z]:[\\/]*) ;;
+    *)
+      for file in $files; do
+	case $file in
+	*.lo) ;;
+	*)
+	  $echo "$modename: \`$destdir' must be an absolute directory name" 1>&2
+	  $echo "$help" 1>&2
+	  exit $EXIT_FAILURE
+	  ;;
+	esac
+      done
+      ;;
+    esac
+
+    # This variable tells wrapper scripts just to set variables rather
+    # than running their programs.
+    libtool_install_magic="$magic"
+
+    staticlibs=
+    future_libdirs=
+    current_libdirs=
+    for file in $files; do
+
+      # Do each installation.
+      case $file in
+      *.$libext)
+	# Do the static libraries later.
+	staticlibs="$staticlibs $file"
+	;;
+
+      *.la)
+	# Check to see that this really is a libtool archive.
+	if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
+	else
+	  $echo "$modename: \`$file' is not a valid libtool archive" 1>&2
+	  $echo "$help" 1>&2
+	  exit $EXIT_FAILURE
+	fi
+
+	library_names=
+	old_library=
+	relink_command=
+	# If there is no directory component, then add one.
+	case $file in
+	*/* | *\\*) . $file ;;
+	*) . ./$file ;;
+	esac
+
+	# Add the libdir to current_libdirs if it is the destination.
+	if test "X$destdir" = "X$libdir"; then
+	  case "$current_libdirs " in
+	  *" $libdir "*) ;;
+	  *) current_libdirs="$current_libdirs $libdir" ;;
+	  esac
+	else
+	  # Note the libdir as a future libdir.
+	  case "$future_libdirs " in
+	  *" $libdir "*) ;;
+	  *) future_libdirs="$future_libdirs $libdir" ;;
+	  esac
+	fi
+
+	dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`/
+	test "X$dir" = "X$file/" && dir=
+	dir="$dir$objdir"
+
+	if test -n "$relink_command"; then
+	  # Determine the prefix the user has applied to our future dir.
+	  inst_prefix_dir=`$echo "$destdir" | $SED "s%$libdir\$%%"`
+
+	  # Don't allow the user to place us outside of our expected
+	  # location b/c this prevents finding dependent libraries that
+	  # are installed to the same prefix.
+	  # At present, this check doesn't affect windows .dll's that
+	  # are installed into $libdir/../bin (currently, that works fine)
+	  # but it's something to keep an eye on.
+	  if test "$inst_prefix_dir" = "$destdir"; then
+	    $echo "$modename: error: cannot install \`$file' to a directory not ending in $libdir" 1>&2
+	    exit $EXIT_FAILURE
+	  fi
+
+	  if test -n "$inst_prefix_dir"; then
+	    # Stick the inst_prefix_dir data into the link command.
+	    relink_command=`$echo "$relink_command" | $SP2NL | $SED "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%" | $NL2SP`
+	  else
+	    relink_command=`$echo "$relink_command" | $SP2NL | $SED "s%@inst_prefix_dir@%%" | $NL2SP`
+	  fi
+
+	  $echo "$modename: warning: relinking \`$file'" 1>&2
+	  $show "$relink_command"
+	  if $run eval "$relink_command"; then :
+	  else
+	    $echo "$modename: error: relink \`$file' with the above command before installing it" 1>&2
+	    exit $EXIT_FAILURE
+	  fi
+	fi
+
+	# See the names of the shared library.
+	set dummy $library_names
+	if test -n "$2"; then
+	  realname="$2"
+	  shift
+	  shift
+
+	  srcname="$realname"
+	  test -n "$relink_command" && srcname="$realname"T
+
+	  # Install the shared library and build the symlinks.
+	  $show "$install_prog $dir/$srcname $destdir/$realname"
+	  $run eval "$install_prog $dir/$srcname $destdir/$realname" || exit $?
+	  if test -n "$stripme" && test -n "$striplib"; then
+	    $show "$striplib $destdir/$realname"
+	    $run eval "$striplib $destdir/$realname" || exit $?
+	  fi
+
+	  if test "$#" -gt 0; then
+	    # Delete the old symlinks, and create new ones.
+	    # Try `ln -sf' first, because the `ln' binary might depend on
+	    # the symlink we replace!  Solaris /bin/ln does not understand -f,
+	    # so we also need to try rm && ln -s.
+	    for linkname
+	    do
+	      if test "$linkname" != "$realname"; then
+                $show "(cd $destdir && { $LN_S -f $realname $linkname || { $rm $linkname && $LN_S $realname $linkname; }; })"
+                $run eval "(cd $destdir && { $LN_S -f $realname $linkname || { $rm $linkname && $LN_S $realname $linkname; }; })"
+	      fi
+	    done
+	  fi
+
+	  # Do each command in the postinstall commands.
+	  lib="$destdir/$realname"
+	  cmds=$postinstall_cmds
+	  save_ifs="$IFS"; IFS='~'
+	  for cmd in $cmds; do
+	    IFS="$save_ifs"
+	    eval cmd=\"$cmd\"
+	    $show "$cmd"
+	    $run eval "$cmd" || {
+	      lt_exit=$?
+
+	      # Restore the uninstalled library and exit
+	      if test "$mode" = relink; then
+		$run eval '(cd $output_objdir && $rm ${realname}T && $mv ${realname}U $realname)'
+	      fi
+
+	      exit $lt_exit
+	    }
+	  done
+	  IFS="$save_ifs"
+	fi
+
+	# Install the pseudo-library for information purposes.
+	name=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
+	instname="$dir/$name"i
+	$show "$install_prog $instname $destdir/$name"
+	$run eval "$install_prog $instname $destdir/$name" || exit $?
+
+	# Maybe install the static library, too.
+	test -n "$old_library" && staticlibs="$staticlibs $dir/$old_library"
+	;;
+
+      *.lo)
+	# Install (i.e. copy) a libtool object.
+
+	# Figure out destination file name, if it wasn't already specified.
+	if test -n "$destname"; then
+	  destfile="$destdir/$destname"
+	else
+	  destfile=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
+	  destfile="$destdir/$destfile"
+	fi
+
+	# Deduce the name of the destination old-style object file.
+	case $destfile in
+	*.lo)
+	  staticdest=`$echo "X$destfile" | $Xsed -e "$lo2o"`
+	  ;;
+	*.$objext)
+	  staticdest="$destfile"
+	  destfile=
+	  ;;
+	*)
+	  $echo "$modename: cannot copy a libtool object to \`$destfile'" 1>&2
+	  $echo "$help" 1>&2
+	  exit $EXIT_FAILURE
+	  ;;
+	esac
+
+	# Install the libtool object if requested.
+	if test -n "$destfile"; then
+	  $show "$install_prog $file $destfile"
+	  $run eval "$install_prog $file $destfile" || exit $?
+	fi
+
+	# Install the old object if enabled.
+	if test "$build_old_libs" = yes; then
+	  # Deduce the name of the old-style object file.
+	  staticobj=`$echo "X$file" | $Xsed -e "$lo2o"`
+
+	  $show "$install_prog $staticobj $staticdest"
+	  $run eval "$install_prog \$staticobj \$staticdest" || exit $?
+	fi
+	exit $EXIT_SUCCESS
+	;;
+
+      *)
+	# Figure out destination file name, if it wasn't already specified.
+	if test -n "$destname"; then
+	  destfile="$destdir/$destname"
+	else
+	  destfile=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
+	  destfile="$destdir/$destfile"
+	fi
+
+	# If the file is missing, and there is a .exe on the end, strip it
+	# because it is most likely a libtool script we actually want to
+	# install
+	stripped_ext=""
+	case $file in
+	  *.exe)
+	    if test ! -f "$file"; then
+	      file=`$echo $file|${SED} 's,.exe$,,'`
+	      stripped_ext=".exe"
+	    fi
+	    ;;
+	esac
+
+	# Do a test to see if this is really a libtool program.
+	case $host in
+	*cygwin*|*mingw*)
+	    wrapper=`$echo $file | ${SED} -e 's,.exe$,,'`
+	    ;;
+	*)
+	    wrapper=$file
+	    ;;
+	esac
+	if (${SED} -e '4q' $wrapper | grep "^# Generated by .*$PACKAGE")>/dev/null 2>&1; then
+	  notinst_deplibs=
+	  relink_command=
+
+	  # Note that it is not necessary on cygwin/mingw to append a dot to
+	  # foo even if both foo and FILE.exe exist: automatic-append-.exe
+	  # behavior happens only for exec(3), not for open(2)!  Also, sourcing
+	  # `FILE.' does not work on cygwin managed mounts.
+	  #
+	  # If there is no directory component, then add one.
+	  case $wrapper in
+	  */* | *\\*) . ${wrapper} ;;
+	  *) . ./${wrapper} ;;
+	  esac
+
+	  # Check the variables that should have been set.
+	  if test -z "$notinst_deplibs"; then
+	    $echo "$modename: invalid libtool wrapper script \`$wrapper'" 1>&2
+	    exit $EXIT_FAILURE
+	  fi
+
+	  finalize=yes
+	  for lib in $notinst_deplibs; do
+	    # Check to see that each library is installed.
+	    libdir=
+	    if test -f "$lib"; then
+	      # If there is no directory component, then add one.
+	      case $lib in
+	      */* | *\\*) . $lib ;;
+	      *) . ./$lib ;;
+	      esac
+	    fi
+	    libfile="$libdir/"`$echo "X$lib" | $Xsed -e 's%^.*/%%g'` ### testsuite: skip nested quoting test
+	    if test -n "$libdir" && test ! -f "$libfile"; then
+	      $echo "$modename: warning: \`$lib' has not been installed in \`$libdir'" 1>&2
+	      finalize=no
+	    fi
+	  done
+
+	  relink_command=
+	  # Note that it is not necessary on cygwin/mingw to append a dot to
+	  # foo even if both foo and FILE.exe exist: automatic-append-.exe
+	  # behavior happens only for exec(3), not for open(2)!  Also, sourcing
+	  # `FILE.' does not work on cygwin managed mounts.
+	  #
+	  # If there is no directory component, then add one.
+	  case $wrapper in
+	  */* | *\\*) . ${wrapper} ;;
+	  *) . ./${wrapper} ;;
+	  esac
+
+	  outputname=
+	  if test "$fast_install" = no && test -n "$relink_command"; then
+	    if test "$finalize" = yes && test -z "$run"; then
+	      tmpdir=`func_mktempdir`
+	      file=`$echo "X$file$stripped_ext" | $Xsed -e 's%^.*/%%'`
+	      outputname="$tmpdir/$file"
+	      # Replace the output file specification.
+	      relink_command=`$echo "X$relink_command" | $SP2NL | $Xsed -e 's%@OUTPUT@%'"$outputname"'%g' | $NL2SP`
+
+	      $show "$relink_command"
+	      if $run eval "$relink_command"; then :
+	      else
+		$echo "$modename: error: relink \`$file' with the above command before installing it" 1>&2
+		${rm}r "$tmpdir"
+		continue
+	      fi
+	      file="$outputname"
+	    else
+	      $echo "$modename: warning: cannot relink \`$file'" 1>&2
+	    fi
+	  else
+	    # Install the binary that we compiled earlier.
+	    file=`$echo "X$file$stripped_ext" | $Xsed -e "s%\([^/]*\)$%$objdir/\1%"`
+	  fi
+	fi
+
+	# remove .exe since cygwin /usr/bin/install will append another
+	# one anyway 
+	case $install_prog,$host in
+	*/usr/bin/install*,*cygwin*)
+	  case $file:$destfile in
+	  *.exe:*.exe)
+	    # this is ok
+	    ;;
+	  *.exe:*)
+	    destfile=$destfile.exe
+	    ;;
+	  *:*.exe)
+	    destfile=`$echo $destfile | ${SED} -e 's,.exe$,,'`
+	    ;;
+	  esac
+	  ;;
+	esac
+	$show "$install_prog$stripme $file $destfile"
+	$run eval "$install_prog\$stripme \$file \$destfile" || exit $?
+	test -n "$outputname" && ${rm}r "$tmpdir"
+	;;
+      esac
+    done
+
+    for file in $staticlibs; do
+      name=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
+
+      # Set up the ranlib parameters.
+      oldlib="$destdir/$name"
+
+      $show "$install_prog $file $oldlib"
+      $run eval "$install_prog \$file \$oldlib" || exit $?
+
+      if test -n "$stripme" && test -n "$old_striplib"; then
+	$show "$old_striplib $oldlib"
+	$run eval "$old_striplib $oldlib" || exit $?
+      fi
+
+      # Do each command in the postinstall commands.
+      cmds=$old_postinstall_cmds
+      save_ifs="$IFS"; IFS='~'
+      for cmd in $cmds; do
+	IFS="$save_ifs"
+	eval cmd=\"$cmd\"
+	$show "$cmd"
+	$run eval "$cmd" || exit $?
+      done
+      IFS="$save_ifs"
+    done
+
+    if test -n "$future_libdirs"; then
+      $echo "$modename: warning: remember to run \`$progname --finish$future_libdirs'" 1>&2
+    fi
+
+    if test -n "$current_libdirs"; then
+      # Maybe just do a dry run.
+      test -n "$run" && current_libdirs=" -n$current_libdirs"
+      exec_cmd='$SHELL $progpath $preserve_args --finish$current_libdirs'
+    else
+      exit $EXIT_SUCCESS
+    fi
+    ;;
+
+  # libtool finish mode
+  finish)
+    modename="$modename: finish"
+    libdirs="$nonopt"
+    admincmds=
+
+    if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then
+      for dir
+      do
+	libdirs="$libdirs $dir"
+      done
+
+      for libdir in $libdirs; do
+	if test -n "$finish_cmds"; then
+	  # Do each command in the finish commands.
+	  cmds=$finish_cmds
+	  save_ifs="$IFS"; IFS='~'
+	  for cmd in $cmds; do
+	    IFS="$save_ifs"
+	    eval cmd=\"$cmd\"
+	    $show "$cmd"
+	    $run eval "$cmd" || admincmds="$admincmds
+       $cmd"
+	  done
+	  IFS="$save_ifs"
+	fi
+	if test -n "$finish_eval"; then
+	  # Do the single finish_eval.
+	  eval cmds=\"$finish_eval\"
+	  $run eval "$cmds" || admincmds="$admincmds
+       $cmds"
+	fi
+      done
+    fi
+
+    # Exit here if they wanted silent mode.
+    test "$show" = : && exit $EXIT_SUCCESS
+
+    $echo "X----------------------------------------------------------------------" | $Xsed
+    $echo "Libraries have been installed in:"
+    for libdir in $libdirs; do
+      $echo "   $libdir"
+    done
+    $echo
+    $echo "If you ever happen to want to link against installed libraries"
+    $echo "in a given directory, LIBDIR, you must either use libtool, and"
+    $echo "specify the full pathname of the library, or use the \`-LLIBDIR'"
+    $echo "flag during linking and do at least one of the following:"
+    if test -n "$shlibpath_var"; then
+      $echo "   - add LIBDIR to the \`$shlibpath_var' environment variable"
+      $echo "     during execution"
+    fi
+    if test -n "$runpath_var"; then
+      $echo "   - add LIBDIR to the \`$runpath_var' environment variable"
+      $echo "     during linking"
+    fi
+    if test -n "$hardcode_libdir_flag_spec"; then
+      libdir=LIBDIR
+      eval flag=\"$hardcode_libdir_flag_spec\"
+
+      $echo "   - use the \`$flag' linker flag"
+    fi
+    if test -n "$admincmds"; then
+      $echo "   - have your system administrator run these commands:$admincmds"
+    fi
+    if test -f /etc/ld.so.conf; then
+      $echo "   - have your system administrator add LIBDIR to \`/etc/ld.so.conf'"
+    fi
+    $echo
+    $echo "See any operating system documentation about shared libraries for"
+    $echo "more information, such as the ld(1) and ld.so(8) manual pages."
+    $echo "X----------------------------------------------------------------------" | $Xsed
+    exit $EXIT_SUCCESS
+    ;;
+
+  # libtool execute mode
+  execute)
+    modename="$modename: execute"
+
+    # The first argument is the command name.
+    cmd="$nonopt"
+    if test -z "$cmd"; then
+      $echo "$modename: you must specify a COMMAND" 1>&2
+      $echo "$help"
+      exit $EXIT_FAILURE
+    fi
+
+    # Handle -dlopen flags immediately.
+    for file in $execute_dlfiles; do
+      if test ! -f "$file"; then
+	$echo "$modename: \`$file' is not a file" 1>&2
+	$echo "$help" 1>&2
+	exit $EXIT_FAILURE
+      fi
+
+      dir=
+      case $file in
+      *.la)
+	# Check to see that this really is a libtool archive.
+	if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
+	else
+	  $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
+	  $echo "$help" 1>&2
+	  exit $EXIT_FAILURE
+	fi
+
+	# Read the libtool library.
+	dlname=
+	library_names=
+
+	# If there is no directory component, then add one.
+	case $file in
+	*/* | *\\*) . $file ;;
+	*) . ./$file ;;
+	esac
+
+	# Skip this library if it cannot be dlopened.
+	if test -z "$dlname"; then
+	  # Warn if it was a shared library.
+	  test -n "$library_names" && $echo "$modename: warning: \`$file' was not linked with \`-export-dynamic'"
+	  continue
+	fi
+
+	dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`
+	test "X$dir" = "X$file" && dir=.
+
+	if test -f "$dir/$objdir/$dlname"; then
+	  dir="$dir/$objdir"
+	else
+	  if test ! -f "$dir/$dlname"; then
+	    $echo "$modename: cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'" 1>&2
+	    exit $EXIT_FAILURE
+	  fi
+	fi
+	;;
+
+      *.lo)
+	# Just add the directory containing the .lo file.
+	dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`
+	test "X$dir" = "X$file" && dir=.
+	;;
+
+      *)
+	$echo "$modename: warning \`-dlopen' is ignored for non-libtool libraries and objects" 1>&2
+	continue
+	;;
+      esac
+
+      # Get the absolute pathname.
+      absdir=`cd "$dir" && pwd`
+      test -n "$absdir" && dir="$absdir"
+
+      # Now add the directory to shlibpath_var.
+      if eval "test -z \"\$$shlibpath_var\""; then
+	eval "$shlibpath_var=\"\$dir\""
+      else
+	eval "$shlibpath_var=\"\$dir:\$$shlibpath_var\""
+      fi
+    done
+
+    # This variable tells wrapper scripts just to set shlibpath_var
+    # rather than running their programs.
+    libtool_execute_magic="$magic"
+
+    # Check if any of the arguments is a wrapper script.
+    args=
+    for file
+    do
+      case $file in
+      -*) ;;
+      *)
+	# Do a test to see if this is really a libtool program.
+	if (${SED} -e '4q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
+	  # If there is no directory component, then add one.
+	  case $file in
+	  */* | *\\*) . $file ;;
+	  *) . ./$file ;;
+	  esac
+
+	  # Transform arg to wrapped name.
+	  file="$progdir/$program"
+	fi
+	;;
+      esac
+      # Quote arguments (to preserve shell metacharacters).
+      file=`$echo "X$file" | $Xsed -e "$sed_quote_subst"`
+      args="$args \"$file\""
+    done
+
+    if test -z "$run"; then
+      if test -n "$shlibpath_var"; then
+	# Export the shlibpath_var.
+	eval "export $shlibpath_var"
+      fi
+
+      # Restore saved environment variables
+      for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
+      do
+	eval "if test \"\${save_$lt_var+set}\" = set; then
+		$lt_var=\$save_$lt_var; export $lt_var
+	      fi"
+      done
+
+      # Now prepare to actually exec the command.
+      exec_cmd="\$cmd$args"
+    else
+      # Display what would be done.
+      if test -n "$shlibpath_var"; then
+	eval "\$echo \"\$shlibpath_var=\$$shlibpath_var\""
+	$echo "export $shlibpath_var"
+      fi
+      $echo "$cmd$args"
+      exit $EXIT_SUCCESS
+    fi
+    ;;
+
+  # libtool clean and uninstall mode
+  clean | uninstall)
+    modename="$modename: $mode"
+    rm="$nonopt"
+    files=
+    rmforce=
+    exit_status=0
+
+    # This variable tells wrapper scripts just to set variables rather
+    # than running their programs.
+    libtool_install_magic="$magic"
+
+    for arg
+    do
+      case $arg in
+      -f) rm="$rm $arg"; rmforce=yes ;;
+      -*) rm="$rm $arg" ;;
+      *) files="$files $arg" ;;
+      esac
+    done
+
+    if test -z "$rm"; then
+      $echo "$modename: you must specify an RM program" 1>&2
+      $echo "$help" 1>&2
+      exit $EXIT_FAILURE
+    fi
+
+    rmdirs=
+
+    origobjdir="$objdir"
+    for file in $files; do
+      dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`
+      if test "X$dir" = "X$file"; then
+	dir=.
+	objdir="$origobjdir"
+      else
+	objdir="$dir/$origobjdir"
+      fi
+      name=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
+      test "$mode" = uninstall && objdir="$dir"
+
+      # Remember objdir for removal later, being careful to avoid duplicates
+      if test "$mode" = clean; then
+	case " $rmdirs " in
+	  *" $objdir "*) ;;
+	  *) rmdirs="$rmdirs $objdir" ;;
+	esac
+      fi
+
+      # Don't error if the file doesn't exist and rm -f was used.
+      if (test -L "$file") >/dev/null 2>&1 \
+	|| (test -h "$file") >/dev/null 2>&1 \
+	|| test -f "$file"; then
+	:
+      elif test -d "$file"; then
+	exit_status=1
+	continue
+      elif test "$rmforce" = yes; then
+	continue
+      fi
+
+      rmfiles="$file"
+
+      case $name in
+      *.la)
+	# Possibly a libtool archive, so verify it.
+	if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
+	  . $dir/$name
+
+	  # Delete the libtool libraries and symlinks.
+	  for n in $library_names; do
+	    rmfiles="$rmfiles $objdir/$n"
+	  done
+	  test -n "$old_library" && rmfiles="$rmfiles $objdir/$old_library"
+
+	  case "$mode" in
+	  clean)
+	    case "  $library_names " in
+	    # "  " in the beginning catches empty $dlname
+	    *" $dlname "*) ;;
+	    *) rmfiles="$rmfiles $objdir/$dlname" ;;
+	    esac
+	     test -n "$libdir" && rmfiles="$rmfiles $objdir/$name $objdir/${name}i"
+	    ;;
+	  uninstall)
+	    if test -n "$library_names"; then
+	      # Do each command in the postuninstall commands.
+	      cmds=$postuninstall_cmds
+	      save_ifs="$IFS"; IFS='~'
+	      for cmd in $cmds; do
+		IFS="$save_ifs"
+		eval cmd=\"$cmd\"
+		$show "$cmd"
+		$run eval "$cmd"
+		if test "$?" -ne 0 && test "$rmforce" != yes; then
+		  exit_status=1
+		fi
+	      done
+	      IFS="$save_ifs"
+	    fi
+
+	    if test -n "$old_library"; then
+	      # Do each command in the old_postuninstall commands.
+	      cmds=$old_postuninstall_cmds
+	      save_ifs="$IFS"; IFS='~'
+	      for cmd in $cmds; do
+		IFS="$save_ifs"
+		eval cmd=\"$cmd\"
+		$show "$cmd"
+		$run eval "$cmd"
+		if test "$?" -ne 0 && test "$rmforce" != yes; then
+		  exit_status=1
+		fi
+	      done
+	      IFS="$save_ifs"
+	    fi
+	    # FIXME: should reinstall the best remaining shared library.
+	    ;;
+	  esac
+	fi
+	;;
+
+      *.lo)
+	# Possibly a libtool object, so verify it.
+	if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
+
+	  # Read the .lo file
+	  . $dir/$name
+
+	  # Add PIC object to the list of files to remove.
+	  if test -n "$pic_object" \
+	     && test "$pic_object" != none; then
+	    rmfiles="$rmfiles $dir/$pic_object"
+	  fi
+
+	  # Add non-PIC object to the list of files to remove.
+	  if test -n "$non_pic_object" \
+	     && test "$non_pic_object" != none; then
+	    rmfiles="$rmfiles $dir/$non_pic_object"
+	  fi
+	fi
+	;;
+
+      *)
+	if test "$mode" = clean ; then
+	  noexename=$name
+	  case $file in
+	  *.exe)
+	    file=`$echo $file|${SED} 's,.exe$,,'`
+	    noexename=`$echo $name|${SED} 's,.exe$,,'`
+	    # $file with .exe has already been added to rmfiles,
+	    # add $file without .exe
+	    rmfiles="$rmfiles $file"
+	    ;;
+	  esac
+	  # Do a test to see if this is a libtool program.
+	  if (${SED} -e '4q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
+	    relink_command=
+	    . $dir/$noexename
+
+	    # note $name still contains .exe if it was in $file originally
+	    # as does the version of $file that was added into $rmfiles
+	    rmfiles="$rmfiles $objdir/$name $objdir/${name}S.${objext}"
+	    if test "$fast_install" = yes && test -n "$relink_command"; then
+	      rmfiles="$rmfiles $objdir/lt-$name"
+	    fi
+	    if test "X$noexename" != "X$name" ; then
+	      rmfiles="$rmfiles $objdir/lt-${noexename}.c"
+	    fi
+	  fi
+	fi
+	;;
+      esac
+      $show "$rm $rmfiles"
+      $run $rm $rmfiles || exit_status=1
+    done
+    objdir="$origobjdir"
+
+    # Try to remove the ${objdir}s in the directories where we deleted files
+    for dir in $rmdirs; do
+      if test -d "$dir"; then
+	$show "rmdir $dir"
+	$run rmdir $dir >/dev/null 2>&1
+      fi
+    done
+
+    exit $exit_status
+    ;;
+
+  "")
+    $echo "$modename: you must specify a MODE" 1>&2
+    $echo "$generic_help" 1>&2
+    exit $EXIT_FAILURE
+    ;;
+  esac
+
+  if test -z "$exec_cmd"; then
+    $echo "$modename: invalid operation mode \`$mode'" 1>&2
+    $echo "$generic_help" 1>&2
+    exit $EXIT_FAILURE
+  fi
+fi # test -z "$show_help"
+
+if test -n "$exec_cmd"; then
+  eval exec $exec_cmd
+  exit $EXIT_FAILURE
+fi
+
+# We need to display help for each of the modes.
+case $mode in
+"") $echo \
+"Usage: $modename [OPTION]... [MODE-ARG]...
+
+Provide generalized library-building support services.
+
+    --config          show all configuration variables
+    --debug           enable verbose shell tracing
+-n, --dry-run         display commands without modifying any files
+    --features        display basic configuration information and exit
+    --finish          same as \`--mode=finish'
+    --help            display this help message and exit
+    --mode=MODE       use operation mode MODE [default=inferred from MODE-ARGS]
+    --quiet           same as \`--silent'
+    --silent          don't print informational messages
+    --tag=TAG         use configuration variables from tag TAG
+    --version         print version information
+
+MODE must be one of the following:
+
+      clean           remove files from the build directory
+      compile         compile a source file into a libtool object
+      execute         automatically set library path, then run a program
+      finish          complete the installation of libtool libraries
+      install         install libraries or executables
+      link            create a library or an executable
+      uninstall       remove libraries from an installed directory
+
+MODE-ARGS vary depending on the MODE.  Try \`$modename --help --mode=MODE' for
+a more detailed description of MODE.
+
+Report bugs to <bug-libtool@gnu.org>."
+  exit $EXIT_SUCCESS
+  ;;
+
+clean)
+  $echo \
+"Usage: $modename [OPTION]... --mode=clean RM [RM-OPTION]... FILE...
+
+Remove files from the build directory.
+
+RM is the name of the program to use to delete files associated with each FILE
+(typically \`/bin/rm').  RM-OPTIONS are options (such as \`-f') to be passed
+to RM.
+
+If FILE is a libtool library, object or program, all the files associated
+with it are deleted. Otherwise, only FILE itself is deleted using RM."
+  ;;
+
+compile)
+  $echo \
+"Usage: $modename [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE
+
+Compile a source file into a libtool library object.
+
+This mode accepts the following additional options:
+
+  -o OUTPUT-FILE    set the output file name to OUTPUT-FILE
+  -prefer-pic       try to building PIC objects only
+  -prefer-non-pic   try to building non-PIC objects only
+  -static           always build a \`.o' file suitable for static linking
+
+COMPILE-COMMAND is a command to be used in creating a \`standard' object file
+from the given SOURCEFILE.
+
+The output file name is determined by removing the directory component from
+SOURCEFILE, then substituting the C source code suffix \`.c' with the
+library object suffix, \`.lo'."
+  ;;
+
+execute)
+  $echo \
+"Usage: $modename [OPTION]... --mode=execute COMMAND [ARGS]...
+
+Automatically set library path, then run a program.
+
+This mode accepts the following additional options:
+
+  -dlopen FILE      add the directory containing FILE to the library path
+
+This mode sets the library path environment variable according to \`-dlopen'
+flags.
+
+If any of the ARGS are libtool executable wrappers, then they are translated
+into their corresponding uninstalled binary, and any of their required library
+directories are added to the library path.
+
+Then, COMMAND is executed, with ARGS as arguments."
+  ;;
+
+finish)
+  $echo \
+"Usage: $modename [OPTION]... --mode=finish [LIBDIR]...
+
+Complete the installation of libtool libraries.
+
+Each LIBDIR is a directory that contains libtool libraries.
+
+The commands that this mode executes may require superuser privileges.  Use
+the \`--dry-run' option if you just want to see what would be executed."
+  ;;
+
+install)
+  $echo \
+"Usage: $modename [OPTION]... --mode=install INSTALL-COMMAND...
+
+Install executables or libraries.
+
+INSTALL-COMMAND is the installation command.  The first component should be
+either the \`install' or \`cp' program.
+
+The rest of the components are interpreted as arguments to that command (only
+BSD-compatible install options are recognized)."
+  ;;
+
+link)
+  $echo \
+"Usage: $modename [OPTION]... --mode=link LINK-COMMAND...
+
+Link object files or libraries together to form another library, or to
+create an executable program.
+
+LINK-COMMAND is a command using the C compiler that you would use to create
+a program from several object files.
+
+The following components of LINK-COMMAND are treated specially:
+
+  -all-static       do not do any dynamic linking at all
+  -avoid-version    do not add a version suffix if possible
+  -dlopen FILE      \`-dlpreopen' FILE if it cannot be dlopened at runtime
+  -dlpreopen FILE   link in FILE and add its symbols to lt_preloaded_symbols
+  -export-dynamic   allow symbols from OUTPUT-FILE to be resolved with dlsym(3)
+  -export-symbols SYMFILE
+                    try to export only the symbols listed in SYMFILE
+  -export-symbols-regex REGEX
+                    try to export only the symbols matching REGEX
+  -LLIBDIR          search LIBDIR for required installed libraries
+  -lNAME            OUTPUT-FILE requires the installed library libNAME
+  -module           build a library that can dlopened
+  -no-fast-install  disable the fast-install mode
+  -no-install       link a not-installable executable
+  -no-undefined     declare that a library does not refer to external symbols
+  -o OUTPUT-FILE    create OUTPUT-FILE from the specified objects
+  -objectlist FILE  Use a list of object files found in FILE to specify objects
+  -precious-files-regex REGEX
+                    don't remove output files matching REGEX
+  -release RELEASE  specify package release information
+  -rpath LIBDIR     the created library will eventually be installed in LIBDIR
+  -R[ ]LIBDIR       add LIBDIR to the runtime path of programs and libraries
+  -static           do not do any dynamic linking of uninstalled libtool libraries
+  -static-libtool-libs
+                    do not do any dynamic linking of libtool libraries
+  -version-info CURRENT[:REVISION[:AGE]]
+                    specify library version info [each variable defaults to 0]
+
+All other options (arguments beginning with \`-') are ignored.
+
+Every other argument is treated as a filename.  Files ending in \`.la' are
+treated as uninstalled libtool libraries, other files are standard or library
+object files.
+
+If the OUTPUT-FILE ends in \`.la', then a libtool library is created,
+only library objects (\`.lo' files) may be specified, and \`-rpath' is
+required, except when creating a convenience library.
+
+If OUTPUT-FILE ends in \`.a' or \`.lib', then a standard library is created
+using \`ar' and \`ranlib', or on Windows using \`lib'.
+
+If OUTPUT-FILE ends in \`.lo' or \`.${objext}', then a reloadable object file
+is created, otherwise an executable program is created."
+  ;;
+
+uninstall)
+  $echo \
+"Usage: $modename [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE...
+
+Remove libraries from an installation directory.
+
+RM is the name of the program to use to delete files associated with each FILE
+(typically \`/bin/rm').  RM-OPTIONS are options (such as \`-f') to be passed
+to RM.
+
+If FILE is a libtool library, all the files associated with it are deleted.
+Otherwise, only FILE itself is deleted using RM."
+  ;;
+
+*)
+  $echo "$modename: invalid operation mode \`$mode'" 1>&2
+  $echo "$help" 1>&2
+  exit $EXIT_FAILURE
+  ;;
+esac
+
+$echo
+$echo "Try \`$modename --help' for more information about other modes."
+
+exit $?
+
+# The TAGs below are defined such that we never get into a situation
+# in which we disable both kinds of libraries.  Given conflicting
+# choices, we go for a static library, that is the most portable,
+# since we can't tell whether shared libraries were disabled because
+# the user asked for that or because the platform doesn't support
+# them.  This is particularly important on AIX, because we don't
+# support having both static and shared libraries enabled at the same
+# time on that platform, so we default to a shared-only configuration.
+# If a disable-shared tag is given, we'll fallback to a static-only
+# configuration.  But we'll never go from static-only to shared-only.
+
+# ### BEGIN LIBTOOL TAG CONFIG: disable-shared
+disable_libs=shared
+# ### END LIBTOOL TAG CONFIG: disable-shared
+
+# ### BEGIN LIBTOOL TAG CONFIG: disable-static
+disable_libs=static
+# ### END LIBTOOL TAG CONFIG: disable-static
+
+# Local Variables:
+# mode:shell-script
+# sh-indentation:2
+# End:
diff -Nru /tmp/bxdedfLB6u/uriparser-0.6.0/build-aux/missing /tmp/fLjZ2dz9P3/uriparser-0.7.4/build-aux/missing
--- uriparser-0.6.0/build-aux/missing	1970-01-01 01:00:00.000000000 +0100
+++ uriparser-0.7.4/build-aux/missing	2008-12-23 02:31:18.000000000 +0000
@@ -0,0 +1,367 @@
+#! /bin/sh
+# Common stub for a few missing GNU programs while installing.
+
+scriptversion=2006-05-10.23
+
+# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005, 2006
+#   Free Software Foundation, Inc.
+# Originally by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+# 02110-1301, USA.
+
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+if test $# -eq 0; then
+  echo 1>&2 "Try \`$0 --help' for more information"
+  exit 1
+fi
+
+run=:
+sed_output='s/.* --output[ =]\([^ ]*\).*/\1/p'
+sed_minuso='s/.* -o \([^ ]*\).*/\1/p'
+
+# In the cases where this matters, `missing' is being run in the
+# srcdir already.
+if test -f configure.ac; then
+  configure_ac=configure.ac
+else
+  configure_ac=configure.in
+fi
+
+msg="missing on your system"
+
+case $1 in
+--run)
+  # Try to run requested program, and just exit if it succeeds.
+  run=
+  shift
+  "$@" && exit 0
+  # Exit code 63 means version mismatch.  This often happens
+  # when the user try to use an ancient version of a tool on
+  # a file that requires a minimum version.  In this case we
+  # we should proceed has if the program had been absent, or
+  # if --run hadn't been passed.
+  if test $? = 63; then
+    run=:
+    msg="probably too old"
+  fi
+  ;;
+
+  -h|--h|--he|--hel|--help)
+    echo "\
+$0 [OPTION]... PROGRAM [ARGUMENT]...
+
+Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an
+error status if there is no known handling for PROGRAM.
+
+Options:
+  -h, --help      display this help and exit
+  -v, --version   output version information and exit
+  --run           try to run the given command, and emulate it if it fails
+
+Supported PROGRAM values:
+  aclocal      touch file \`aclocal.m4'
+  autoconf     touch file \`configure'
+  autoheader   touch file \`config.h.in'
+  autom4te     touch the output file, or create a stub one
+  automake     touch all \`Makefile.in' files
+  bison        create \`y.tab.[ch]', if possible, from existing .[ch]
+  flex         create \`lex.yy.c', if possible, from existing .c
+  help2man     touch the output file
+  lex          create \`lex.yy.c', if possible, from existing .c
+  makeinfo     touch the output file
+  tar          try tar, gnutar, gtar, then tar without non-portable flags
+  yacc         create \`y.tab.[ch]', if possible, from existing .[ch]
+
+Send bug reports to <bug-automake@gnu.org>."
+    exit $?
+    ;;
+
+  -v|--v|--ve|--ver|--vers|--versi|--versio|--version)
+    echo "missing $scriptversion (GNU Automake)"
+    exit $?
+    ;;
+
+  -*)
+    echo 1>&2 "$0: Unknown \`$1' option"
+    echo 1>&2 "Try \`$0 --help' for more information"
+    exit 1
+    ;;
+
+esac
+
+# Now exit if we have it, but it failed.  Also exit now if we
+# don't have it and --version was passed (most likely to detect
+# the program).
+case $1 in
+  lex|yacc)
+    # Not GNU programs, they don't have --version.
+    ;;
+
+  tar)
+    if test -n "$run"; then
+       echo 1>&2 "ERROR: \`tar' requires --run"
+       exit 1
+    elif test "x$2" = "x--version" || test "x$2" = "x--help"; then
+       exit 1
+    fi
+    ;;
+
+  *)
+    if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
+       # We have it, but it failed.
+       exit 1
+    elif test "x$2" = "x--version" || test "x$2" = "x--help"; then
+       # Could not run --version or --help.  This is probably someone
+       # running `$TOOL --version' or `$TOOL --help' to check whether
+       # $TOOL exists and not knowing $TOOL uses missing.
+       exit 1
+    fi
+    ;;
+esac
+
+# If it does not exist, or fails to run (possibly an outdated version),
+# try to emulate it.
+case $1 in
+  aclocal*)
+    echo 1>&2 "\
+WARNING: \`$1' is $msg.  You should only need it if
+         you modified \`acinclude.m4' or \`${configure_ac}'.  You might want
+         to install the \`Automake' and \`Perl' packages.  Grab them from
+         any GNU archive site."
+    touch aclocal.m4
+    ;;
+
+  autoconf)
+    echo 1>&2 "\
+WARNING: \`$1' is $msg.  You should only need it if
+         you modified \`${configure_ac}'.  You might want to install the
+         \`Autoconf' and \`GNU m4' packages.  Grab them from any GNU
+         archive site."
+    touch configure
+    ;;
+
+  autoheader)
+    echo 1>&2 "\
+WARNING: \`$1' is $msg.  You should only need it if
+         you modified \`acconfig.h' or \`${configure_ac}'.  You might want
+         to install the \`Autoconf' and \`GNU m4' packages.  Grab them
+         from any GNU archive site."
+    files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' ${configure_ac}`
+    test -z "$files" && files="config.h"
+    touch_files=
+    for f in $files; do
+      case $f in
+      *:*) touch_files="$touch_files "`echo "$f" |
+				       sed -e 's/^[^:]*://' -e 's/:.*//'`;;
+      *) touch_files="$touch_files $f.in";;
+      esac
+    done
+    touch $touch_files
+    ;;
+
+  automake*)
+    echo 1>&2 "\
+WARNING: \`$1' is $msg.  You should only need it if
+         you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'.
+         You might want to install the \`Automake' and \`Perl' packages.
+         Grab them from any GNU archive site."
+    find . -type f -name Makefile.am -print |
+	   sed 's/\.am$/.in/' |
+	   while read f; do touch "$f"; done
+    ;;
+
+  autom4te)
+    echo 1>&2 "\
+WARNING: \`$1' is needed, but is $msg.
+         You might have modified some files without having the
+         proper tools for further handling them.
+         You can get \`$1' as part of \`Autoconf' from any GNU
+         archive site."
+
+    file=`echo "$*" | sed -n "$sed_output"`
+    test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
+    if test -f "$file"; then
+	touch $file
+    else
+	test -z "$file" || exec >$file
+	echo "#! /bin/sh"
+	echo "# Created by GNU Automake missing as a replacement of"
+	echo "#  $ $@"
+	echo "exit 0"
+	chmod +x $file
+	exit 1
+    fi
+    ;;
+
+  bison|yacc)
+    echo 1>&2 "\
+WARNING: \`$1' $msg.  You should only need it if
+         you modified a \`.y' file.  You may need the \`Bison' package
+         in order for those modifications to take effect.  You can get
+         \`Bison' from any GNU archive site."
+    rm -f y.tab.c y.tab.h
+    if test $# -ne 1; then
+        eval LASTARG="\${$#}"
+	case $LASTARG in
+	*.y)
+	    SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'`
+	    if test -f "$SRCFILE"; then
+	         cp "$SRCFILE" y.tab.c
+	    fi
+	    SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'`
+	    if test -f "$SRCFILE"; then
+	         cp "$SRCFILE" y.tab.h
+	    fi
+	  ;;
+	esac
+    fi
+    if test ! -f y.tab.h; then
+	echo >y.tab.h
+    fi
+    if test ! -f y.tab.c; then
+	echo 'main() { return 0; }' >y.tab.c
+    fi
+    ;;
+
+  lex|flex)
+    echo 1>&2 "\
+WARNING: \`$1' is $msg.  You should only need it if
+         you modified a \`.l' file.  You may need the \`Flex' package
+         in order for those modifications to take effect.  You can get
+         \`Flex' from any GNU archive site."
+    rm -f lex.yy.c
+    if test $# -ne 1; then
+        eval LASTARG="\${$#}"
+	case $LASTARG in
+	*.l)
+	    SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'`
+	    if test -f "$SRCFILE"; then
+	         cp "$SRCFILE" lex.yy.c
+	    fi
+	  ;;
+	esac
+    fi
+    if test ! -f lex.yy.c; then
+	echo 'main() { return 0; }' >lex.yy.c
+    fi
+    ;;
+
+  help2man)
+    echo 1>&2 "\
+WARNING: \`$1' is $msg.  You should only need it if
+	 you modified a dependency of a manual page.  You may need the
+	 \`Help2man' package in order for those modifications to take
+	 effect.  You can get \`Help2man' from any GNU archive site."
+
+    file=`echo "$*" | sed -n "$sed_output"`
+    test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
+    if test -f "$file"; then
+	touch $file
+    else
+	test -z "$file" || exec >$file
+	echo ".ab help2man is required to generate this page"
+	exit 1
+    fi
+    ;;
+
+  makeinfo)
+    echo 1>&2 "\
+WARNING: \`$1' is $msg.  You should only need it if
+         you modified a \`.texi' or \`.texinfo' file, or any other file
+         indirectly affecting the aspect of the manual.  The spurious
+         call might also be the consequence of using a buggy \`make' (AIX,
+         DU, IRIX).  You might want to install the \`Texinfo' package or
+         the \`GNU make' package.  Grab either from any GNU archive site."
+    # The file to touch is that specified with -o ...
+    file=`echo "$*" | sed -n "$sed_output"`
+    test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
+    if test -z "$file"; then
+      # ... or it is the one specified with @setfilename ...
+      infile=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'`
+      file=`sed -n '
+	/^@setfilename/{
+	  s/.* \([^ ]*\) *$/\1/
+	  p
+	  q
+	}' $infile`
+      # ... or it is derived from the source name (dir/f.texi becomes f.info)
+      test -z "$file" && file=`echo "$infile" | sed 's,.*/,,;s,.[^.]*$,,'`.info
+    fi
+    # If the file does not exist, the user really needs makeinfo;
+    # let's fail without touching anything.
+    test -f $file || exit 1
+    touch $file
+    ;;
+
+  tar)
+    shift
+
+    # We have already tried tar in the generic part.
+    # Look for gnutar/gtar before invocation to avoid ugly error
+    # messages.
+    if (gnutar --version > /dev/null 2>&1); then
+       gnutar "$@" && exit 0
+    fi
+    if (gtar --version > /dev/null 2>&1); then
+       gtar "$@" && exit 0
+    fi
+    firstarg="$1"
+    if shift; then
+	case $firstarg in
+	*o*)
+	    firstarg=`echo "$firstarg" | sed s/o//`
+	    tar "$firstarg" "$@" && exit 0
+	    ;;
+	esac
+	case $firstarg in
+	*h*)
+	    firstarg=`echo "$firstarg" | sed s/h//`
+	    tar "$firstarg" "$@" && exit 0
+	    ;;
+	esac
+    fi
+
+    echo 1>&2 "\
+WARNING: I can't seem to be able to run \`tar' with the given arguments.
+         You may want to install GNU tar or Free paxutils, or check the
+         command line arguments."
+    exit 1
+    ;;
+
+  *)
+    echo 1>&2 "\
+WARNING: \`$1' is needed, and is $msg.
+         You might have modified some files without having the
+         proper tools for further handling them.  Check the \`README' file,
+         it often tells you about the needed prerequisites for installing
+         this package.  You may also peek at any GNU archive site, in case
+         some other package would contain this missing \`$1' program."
+    exit 1
+    ;;
+esac
+
+exit 0
+
+# Local variables:
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-end: "$"
+# End:
diff -Nru /tmp/bxdedfLB6u/uriparser-0.6.0/ChangeLog /tmp/fLjZ2dz9P3/uriparser-0.7.4/ChangeLog
--- uriparser-0.6.0/ChangeLog	2007-09-19 04:11:22.000000000 +0100
+++ uriparser-0.7.4/ChangeLog	2008-12-23 02:01:21.000000000 +0000
@@ -1,3 +1,106 @@
+2008-12-23 -- 0.7.4
+
+  * Fixed: Null pointer de-referencing when dissecting query
+      strings starting with "&" right after "?" (#2418192).
+      Thanks to Harvey Vrsalovic for reporting!
+  * Fixed: Memory leak in uriFreeQueryList function (#2413066)
+      Thanks to Daniel Chapiesky for reporting!
+  * Fixed: Memory leak in uriNormalizeSyntax(Ex) functions (#2413066)
+      Thanks to Daniel Chapiesky for reporting!
+  * Improved: Nested configure hacks resolved
+  * Soname: 1:9:0
+
+2008-11-08 -- 0.7.3
+
+  * Fixed: Missing NULL check in parsing routines
+      Thanks to Sezai Tekin for reporting!
+  * Fixed: uriparser now builds on Cygwin
+  * Fixed: Now shipping gnulib's config.guess from HEAD
+      which is suitable for Haiku (#2116355)
+  * Changed: swprintf requirement resolved
+  * Changed: Build system changes:
+      - configure option --enable-doc added
+      - configure.in renamed to configure.ac
+      - some Autotools files moved to build-aux directory
+  * Added: Qt Assistant documentation output:
+      - Qt Compressed Help (.qch) at <doc/uriparser-doc-*.qch>
+      - Qt Help Project (.qhp) at <doc/html/index.qhp>
+      Generation requires Doxygen 1.5.7.1-20081103 or later.
+  * Soname: 1:8:0
+
+2008-09-01 -- 0.7.2
+
+  * Fixed: Bad cleanup logic in functions
+      - uriAddBaseUri(..)
+      - uriRemoveBaseUri(..)
+      Previously you needed to call uriFreeUriMembers on return code
+      URI_ERROR_MALLOC and only then. So that's why these functions now
+      take cleanup off your shoulders. An extra call to uriFreeUriMembers
+      from your side is still needed in case of success.
+  * Soname: 1:7:0
+
+2008-04-27 -- 0.7.1
+
+  * Fixed: Bogus syntax error when parsing URIs with port-like
+      passwords, e.g. "http://user:21@host/" (#1948038)
+      Thanks to Friedrich Delgado Friedrichs for reporting!
+  * Fixed: Parser did not handle trailing slashes correctly in some cases,
+      which also made the structures produced from parsing "http://e.com/"
+      and "http://e.com" indistinguishable. (#1950126)
+      Thanks to Edward Z. Yang for reporting!
+
+2008-04-04 -- 0.7.0
+
+  * Added: Dissection and composition of query strings
+  * Added: Documentation improvements
+      (in|out|inout indicators, addition of \since and \see)
+  * Changed: Code::Blocks project files updated from file format
+      version 1.4 to 1.6, which is produced by Code::Blocks 8.02
+  * Added: Code::Blocks workspace file
+  * Soname: 1:5:0
+
+2008-02-25 -- 0.6.4
+
+  * Added: Syntax-based normalization can now handle relative URIs,
+      e.g. "../../a/b/.././c" is normalized to "../../a/c"
+  * Fixed: Normalization code could free foreign memory
+  * Fixed: Normalization processed the path segment even when asked not to
+  * Added: MinGW Makefile and related readme
+      Thanks to Michael Anthony Puls II!
+  * Fixed: Documentation bug not requiring enough memory for the output
+      buffer when converting a relative file URI back to a filename
+  * Soname: 1:4:0
+
+2008-02-11 -- 0.6.3
+
+  * Fixed: Two major crash bugs in normalization code
+      Thanks to Adrian Manrique for the patch!
+  * Added: Brief usage tutorial
+  * Soname: 1:3:0
+
+2008-02-08 -- 0.6.2
+
+  * Fixed: Freeing a normalized URI like "http://test?"
+      caused a crash. Thanks to Adrian Manrique for reporting!
+  * Fixed: Filename <--> URI string conversion helpers can
+      now handle relative URIs and filenames
+  * Soname: 1:2:0
+
+2007-12-23 -- 0.6.1
+
+  * Fixed: Percent-encodings in hostnames were not repaired during normalization.
+      Thanks to Adrian Manrique for reporting!
+  * Fixed: Percent-encodings were fixed after dot removal not before during
+      normalization.
+      Thanks to Adrian Manrique for reporting!
+  * Fixed: Include path order bug
+      Thanks to Ed Schouten for reporting this!
+  * Fixed: Shadow builds now possible
+      Thanks to Adeodato SimĂł for the patch!
+  * Added: Version guards for Autoconf/Automake
+      Thanks to Martin Michlmayr for reporting!
+  * Soname: 1:1:0
+
 2007-09-17 -- 0.6.0
 
   * Fixed: Proper soname updates from now on, starting at 1:0:0
diff -Nru /tmp/bxdedfLB6u/uriparser-0.6.0/config.guess /tmp/fLjZ2dz9P3/uriparser-0.7.4/config.guess
--- uriparser-0.6.0/config.guess	2007-03-24 12:42:51.000000000 +0000
+++ uriparser-0.7.4/config.guess	1970-01-01 01:00:00.000000000 +0100
@@ -1,1513 +0,0 @@
-#! /bin/sh
-# Attempt to guess a canonical system name.
-#   Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
-#   2000, 2001, 2002, 2003, 2004, 2005, 2006 Free Software Foundation,
-#   Inc.
-
-timestamp='2007-01-15'
-
-# This file is free software; you can redistribute it and/or modify it
-# under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA
-# 02110-1301, USA.
-#
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-
-# Originally written by Per Bothner <per@bothner.com>.
-# Please send patches to <config-patches@gnu.org>.  Submit a context
-# diff and a properly formatted ChangeLog entry.
-#
-# This script attempts to guess a canonical system name similar to
-# config.sub.  If it succeeds, it prints the system name on stdout, and
-# exits with 0.  Otherwise, it exits with 1.
-#
-# The plan is that this can be called by configure scripts if you
-# don't specify an explicit build system type.
-
-me=`echo "$0" | sed -e 's,.*/,,'`
-
-usage="\
-Usage: $0 [OPTION]
-
-Output the configuration name of the system \`$me' is run on.
-
-Operation modes:
-  -h, --help         print this help, then exit
-  -t, --time-stamp   print date of last modification, then exit
-  -v, --version      print version number, then exit
-
-Report bugs and patches to <config-patches@gnu.org>."
-
-version="\
-GNU config.guess ($timestamp)
-
-Originally written by Per Bothner.
-Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
-Free Software Foundation, Inc.
-
-This is free software; see the source for copying conditions.  There is NO
-warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
-
-help="
-Try \`$me --help' for more information."
-
-# Parse command line
-while test $# -gt 0 ; do
-  case $1 in
-    --time-stamp | --time* | -t )
-       echo "$timestamp" ; exit ;;
-    --version | -v )
-       echo "$version" ; exit ;;
-    --help | --h* | -h )
-       echo "$usage"; exit ;;
-    -- )     # Stop option processing
-       shift; break ;;
-    - )	# Use stdin as input.
-       break ;;
-    -* )
-       echo "$me: invalid option $1$help" >&2
-       exit 1 ;;
-    * )
-       break ;;
-  esac
-done
-
-if test $# != 0; then
-  echo "$me: too many arguments$help" >&2
-  exit 1
-fi
-
-trap 'exit 1' 1 2 15
-
-# CC_FOR_BUILD -- compiler used by this script. Note that the use of a
-# compiler to aid in system detection is discouraged as it requires
-# temporary files to be created and, as you can see below, it is a
-# headache to deal with in a portable fashion.
-
-# Historically, `CC_FOR_BUILD' used to be named `HOST_CC'. We still
-# use `HOST_CC' if defined, but it is deprecated.
-
-# Portable tmp directory creation inspired by the Autoconf team.
-
-set_cc_for_build='
-trap "exitcode=\$?; (rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null) && exit \$exitcode" 0 ;
-trap "rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null; exit 1" 1 2 13 15 ;
-: ${TMPDIR=/tmp} ;
- { tmp=`(umask 077 && mktemp -d "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } ||
- { test -n "$RANDOM" && tmp=$TMPDIR/cg$$-$RANDOM && (umask 077 && mkdir $tmp) ; } ||
- { tmp=$TMPDIR/cg-$$ && (umask 077 && mkdir $tmp) && echo "Warning: creating insecure temp directory" >&2 ; } ||
- { echo "$me: cannot create a temporary directory in $TMPDIR" >&2 ; exit 1 ; } ;
-dummy=$tmp/dummy ;
-tmpfiles="$dummy.c $dummy.o $dummy.rel $dummy" ;
-case $CC_FOR_BUILD,$HOST_CC,$CC in
- ,,)    echo "int x;" > $dummy.c ;
-	for c in cc gcc c89 c99 ; do
-	  if ($c -c -o $dummy.o $dummy.c) >/dev/null 2>&1 ; then
-	     CC_FOR_BUILD="$c"; break ;
-	  fi ;
-	done ;
-	if test x"$CC_FOR_BUILD" = x ; then
-	  CC_FOR_BUILD=no_compiler_found ;
-	fi
-	;;
- ,,*)   CC_FOR_BUILD=$CC ;;
- ,*,*)  CC_FOR_BUILD=$HOST_CC ;;
-esac ; set_cc_for_build= ;'
-
-# This is needed to find uname on a Pyramid OSx when run in the BSD universe.
-# (ghazi@noc.rutgers.edu 1994-08-24)
-if (test -f /.attbin/uname) >/dev/null 2>&1 ; then
-	PATH=$PATH:/.attbin ; export PATH
-fi
-
-UNAME_MACHINE=`(uname -m) 2>/dev/null` || UNAME_MACHINE=unknown
-UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown
-UNAME_SYSTEM=`(uname -s) 2>/dev/null`  || UNAME_SYSTEM=unknown
-UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown
-
-# Note: order is significant - the case branches are not exclusive.
-
-case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
-    *:NetBSD:*:*)
-	# NetBSD (nbsd) targets should (where applicable) match one or
-	# more of the tupples: *-*-netbsdelf*, *-*-netbsdaout*,
-	# *-*-netbsdecoff* and *-*-netbsd*.  For targets that recently
-	# switched to ELF, *-*-netbsd* would select the old
-	# object file format.  This provides both forward
-	# compatibility and a consistent mechanism for selecting the
-	# object file format.
-	#
-	# Note: NetBSD doesn't particularly care about the vendor
-	# portion of the name.  We always set it to "unknown".
-	sysctl="sysctl -n hw.machine_arch"
-	UNAME_MACHINE_ARCH=`(/sbin/$sysctl 2>/dev/null || \
-	    /usr/sbin/$sysctl 2>/dev/null || echo unknown)`
-	case "${UNAME_MACHINE_ARCH}" in
-	    armeb) machine=armeb-unknown ;;
-	    arm*) machine=arm-unknown ;;
-	    sh3el) machine=shl-unknown ;;
-	    sh3eb) machine=sh-unknown ;;
-	    sh5el) machine=sh5le-unknown ;;
-	    *) machine=${UNAME_MACHINE_ARCH}-unknown ;;
-	esac
-	# The Operating System including object format, if it has switched
-	# to ELF recently, or will in the future.
-	case "${UNAME_MACHINE_ARCH}" in
-	    arm*|i386|m68k|ns32k|sh3*|sparc|vax)
-		eval $set_cc_for_build
-		if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \
-			| grep __ELF__ >/dev/null
-		then
-		    # Once all utilities can be ECOFF (netbsdecoff) or a.out (netbsdaout).
-		    # Return netbsd for either.  FIX?
-		    os=netbsd
-		else
-		    os=netbsdelf
-		fi
-		;;
-	    *)
-	        os=netbsd
-		;;
-	esac
-	# The OS release
-	# Debian GNU/NetBSD machines have a different userland, and
-	# thus, need a distinct triplet. However, they do not need
-	# kernel version information, so it can be replaced with a
-	# suitable tag, in the style of linux-gnu.
-	case "${UNAME_VERSION}" in
-	    Debian*)
-		release='-gnu'
-		;;
-	    *)
-		release=`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'`
-		;;
-	esac
-	# Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM:
-	# contains redundant information, the shorter form:
-	# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used.
-	echo "${machine}-${os}${release}"
-	exit ;;
-    *:OpenBSD:*:*)
-	UNAME_MACHINE_ARCH=`arch | sed 's/OpenBSD.//'`
-	echo ${UNAME_MACHINE_ARCH}-unknown-openbsd${UNAME_RELEASE}
-	exit ;;
-    *:ekkoBSD:*:*)
-	echo ${UNAME_MACHINE}-unknown-ekkobsd${UNAME_RELEASE}
-	exit ;;
-    *:SolidBSD:*:*)
-	echo ${UNAME_MACHINE}-unknown-solidbsd${UNAME_RELEASE}
-	exit ;;
-    macppc:MirBSD:*:*)
-	echo powerpc-unknown-mirbsd${UNAME_RELEASE}
-	exit ;;
-    *:MirBSD:*:*)
-	echo ${UNAME_MACHINE}-unknown-mirbsd${UNAME_RELEASE}
-	exit ;;
-    alpha:OSF1:*:*)
-	case $UNAME_RELEASE in
-	*4.0)
-		UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'`
-		;;
-	*5.*)
-	        UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $4}'`
-		;;
-	esac
-	# According to Compaq, /usr/sbin/psrinfo has been available on
-	# OSF/1 and Tru64 systems produced since 1995.  I hope that
-	# covers most systems running today.  This code pipes the CPU
-	# types through head -n 1, so we only detect the type of CPU 0.
-	ALPHA_CPU_TYPE=`/usr/sbin/psrinfo -v | sed -n -e 's/^  The alpha \(.*\) processor.*$/\1/p' | head -n 1`
-	case "$ALPHA_CPU_TYPE" in
-	    "EV4 (21064)")
-		UNAME_MACHINE="alpha" ;;
-	    "EV4.5 (21064)")
-		UNAME_MACHINE="alpha" ;;
-	    "LCA4 (21066/21068)")
-		UNAME_MACHINE="alpha" ;;
-	    "EV5 (21164)")
-		UNAME_MACHINE="alphaev5" ;;
-	    "EV5.6 (21164A)")
-		UNAME_MACHINE="alphaev56" ;;
-	    "EV5.6 (21164PC)")
-		UNAME_MACHINE="alphapca56" ;;
-	    "EV5.7 (21164PC)")
-		UNAME_MACHINE="alphapca57" ;;
-	    "EV6 (21264)")
-		UNAME_MACHINE="alphaev6" ;;
-	    "EV6.7 (21264A)")
-		UNAME_MACHINE="alphaev67" ;;
-	    "EV6.8CB (21264C)")
-		UNAME_MACHINE="alphaev68" ;;
-	    "EV6.8AL (21264B)")
-		UNAME_MACHINE="alphaev68" ;;
-	    "EV6.8CX (21264D)")
-		UNAME_MACHINE="alphaev68" ;;
-	    "EV6.9A (21264/EV69A)")
-		UNAME_MACHINE="alphaev69" ;;
-	    "EV7 (21364)")
-		UNAME_MACHINE="alphaev7" ;;
-	    "EV7.9 (21364A)")
-		UNAME_MACHINE="alphaev79" ;;
-	esac
-	# A Pn.n version is a patched version.
-	# A Vn.n version is a released version.
-	# A Tn.n version is a released field test version.
-	# A Xn.n version is an unreleased experimental baselevel.
-	# 1.2 uses "1.2" for uname -r.
-	echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[PVTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
-	exit ;;
-    Alpha\ *:Windows_NT*:*)
-	# How do we know it's Interix rather than the generic POSIX subsystem?
-	# Should we change UNAME_MACHINE based on the output of uname instead
-	# of the specific Alpha model?
-	echo alpha-pc-interix
-	exit ;;
-    21064:Windows_NT:50:3)
-	echo alpha-dec-winnt3.5
-	exit ;;
-    Amiga*:UNIX_System_V:4.0:*)
-	echo m68k-unknown-sysv4
-	exit ;;
-    *:[Aa]miga[Oo][Ss]:*:*)
-	echo ${UNAME_MACHINE}-unknown-amigaos
-	exit ;;
-    *:[Mm]orph[Oo][Ss]:*:*)
-	echo ${UNAME_MACHINE}-unknown-morphos
-	exit ;;
-    *:OS/390:*:*)
-	echo i370-ibm-openedition
-	exit ;;
-    *:z/VM:*:*)
-	echo s390-ibm-zvmoe
-	exit ;;
-    *:OS400:*:*)
-        echo powerpc-ibm-os400
-	exit ;;
-    arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*)
-	echo arm-acorn-riscix${UNAME_RELEASE}
-	exit ;;
-    arm:riscos:*:*|arm:RISCOS:*:*)
-	echo arm-unknown-riscos
-	exit ;;
-    SR2?01:HI-UX/MPP:*:* | SR8000:HI-UX/MPP:*:*)
-	echo hppa1.1-hitachi-hiuxmpp
-	exit ;;
-    Pyramid*:OSx*:*:* | MIS*:OSx*:*:* | MIS*:SMP_DC-OSx*:*:*)
-	# akee@wpdis03.wpafb.af.mil (Earle F. Ake) contributed MIS and NILE.
-	if test "`(/bin/universe) 2>/dev/null`" = att ; then
-		echo pyramid-pyramid-sysv3
-	else
-		echo pyramid-pyramid-bsd
-	fi
-	exit ;;
-    NILE*:*:*:dcosx)
-	echo pyramid-pyramid-svr4
-	exit ;;
-    DRS?6000:unix:4.0:6*)
-	echo sparc-icl-nx6
-	exit ;;
-    DRS?6000:UNIX_SV:4.2*:7* | DRS?6000:isis:4.2*:7*)
-	case `/usr/bin/uname -p` in
-	    sparc) echo sparc-icl-nx7; exit ;;
-	esac ;;
-    sun4H:SunOS:5.*:*)
-	echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
-	exit ;;
-    sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*)
-	echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
-	exit ;;
-    i86pc:SunOS:5.*:*)
-	echo i386-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
-	exit ;;
-    sun4*:SunOS:6*:*)
-	# According to config.sub, this is the proper way to canonicalize
-	# SunOS6.  Hard to guess exactly what SunOS6 will be like, but
-	# it's likely to be more like Solaris than SunOS4.
-	echo sparc-sun-solaris3`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
-	exit ;;
-    sun4*:SunOS:*:*)
-	case "`/usr/bin/arch -k`" in
-	    Series*|S4*)
-		UNAME_RELEASE=`uname -v`
-		;;
-	esac
-	# Japanese Language versions have a version number like `4.1.3-JL'.
-	echo sparc-sun-sunos`echo ${UNAME_RELEASE}|sed -e 's/-/_/'`
-	exit ;;
-    sun3*:SunOS:*:*)
-	echo m68k-sun-sunos${UNAME_RELEASE}
-	exit ;;
-    sun*:*:4.2BSD:*)
-	UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null`
-	test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3
-	case "`/bin/arch`" in
-	    sun3)
-		echo m68k-sun-sunos${UNAME_RELEASE}
-		;;
-	    sun4)
-		echo sparc-sun-sunos${UNAME_RELEASE}
-		;;
-	esac
-	exit ;;
-    aushp:SunOS:*:*)
-	echo sparc-auspex-sunos${UNAME_RELEASE}
-	exit ;;
-    # The situation for MiNT is a little confusing.  The machine name
-    # can be virtually everything (everything which is not
-    # "atarist" or "atariste" at least should have a processor
-    # > m68000).  The system name ranges from "MiNT" over "FreeMiNT"
-    # to the lowercase version "mint" (or "freemint").  Finally
-    # the system name "TOS" denotes a system which is actually not
-    # MiNT.  But MiNT is downward compatible to TOS, so this should
-    # be no problem.
-    atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*)
-        echo m68k-atari-mint${UNAME_RELEASE}
-	exit ;;
-    atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*)
-	echo m68k-atari-mint${UNAME_RELEASE}
-        exit ;;
-    *falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*)
-        echo m68k-atari-mint${UNAME_RELEASE}
-	exit ;;
-    milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*)
-        echo m68k-milan-mint${UNAME_RELEASE}
-        exit ;;
-    hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*)
-        echo m68k-hades-mint${UNAME_RELEASE}
-        exit ;;
-    *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*)
-        echo m68k-unknown-mint${UNAME_RELEASE}
-        exit ;;
-    m68k:machten:*:*)
-	echo m68k-apple-machten${UNAME_RELEASE}
-	exit ;;
-    powerpc:machten:*:*)
-	echo powerpc-apple-machten${UNAME_RELEASE}
-	exit ;;
-    RISC*:Mach:*:*)
-	echo mips-dec-mach_bsd4.3
-	exit ;;
-    RISC*:ULTRIX:*:*)
-	echo mips-dec-ultrix${UNAME_RELEASE}
-	exit ;;
-    VAX*:ULTRIX*:*:*)
-	echo vax-dec-ultrix${UNAME_RELEASE}
-	exit ;;
-    2020:CLIX:*:* | 2430:CLIX:*:*)
-	echo clipper-intergraph-clix${UNAME_RELEASE}
-	exit ;;
-    mips:*:*:UMIPS | mips:*:*:RISCos)
-	eval $set_cc_for_build
-	sed 's/^	//' << EOF >$dummy.c
-#ifdef __cplusplus
-#include <stdio.h>  /* for printf() prototype */
-	int main (int argc, char *argv[]) {
-#else
-	int main (argc, argv) int argc; char *argv[]; {
-#endif
-	#if defined (host_mips) && defined (MIPSEB)
-	#if defined (SYSTYPE_SYSV)
-	  printf ("mips-mips-riscos%ssysv\n", argv[1]); exit (0);
-	#endif
-	#if defined (SYSTYPE_SVR4)
-	  printf ("mips-mips-riscos%ssvr4\n", argv[1]); exit (0);
-	#endif
-	#if defined (SYSTYPE_BSD43) || defined(SYSTYPE_BSD)
-	  printf ("mips-mips-riscos%sbsd\n", argv[1]); exit (0);
-	#endif
-	#endif
-	  exit (-1);
-	}
-EOF
-	$CC_FOR_BUILD -o $dummy $dummy.c &&
-	  dummyarg=`echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` &&
-	  SYSTEM_NAME=`$dummy $dummyarg` &&
-	    { echo "$SYSTEM_NAME"; exit; }
-	echo mips-mips-riscos${UNAME_RELEASE}
-	exit ;;
-    Motorola:PowerMAX_OS:*:*)
-	echo powerpc-motorola-powermax
-	exit ;;
-    Motorola:*:4.3:PL8-*)
-	echo powerpc-harris-powermax
-	exit ;;
-    Night_Hawk:*:*:PowerMAX_OS | Synergy:PowerMAX_OS:*:*)
-	echo powerpc-harris-powermax
-	exit ;;
-    Night_Hawk:Power_UNIX:*:*)
-	echo powerpc-harris-powerunix
-	exit ;;
-    m88k:CX/UX:7*:*)
-	echo m88k-harris-cxux7
-	exit ;;
-    m88k:*:4*:R4*)
-	echo m88k-motorola-sysv4
-	exit ;;
-    m88k:*:3*:R3*)
-	echo m88k-motorola-sysv3
-	exit ;;
-    AViiON:dgux:*:*)
-        # DG/UX returns AViiON for all architectures
-        UNAME_PROCESSOR=`/usr/bin/uname -p`
-	if [ $UNAME_PROCESSOR = mc88100 ] || [ $UNAME_PROCESSOR = mc88110 ]
-	then
-	    if [ ${TARGET_BINARY_INTERFACE}x = m88kdguxelfx ] || \
-	       [ ${TARGET_BINARY_INTERFACE}x = x ]
-	    then
-		echo m88k-dg-dgux${UNAME_RELEASE}
-	    else
-		echo m88k-dg-dguxbcs${UNAME_RELEASE}
-	    fi
-	else
-	    echo i586-dg-dgux${UNAME_RELEASE}
-	fi
- 	exit ;;
-    M88*:DolphinOS:*:*)	# DolphinOS (SVR3)
-	echo m88k-dolphin-sysv3
-	exit ;;
-    M88*:*:R3*:*)
-	# Delta 88k system running SVR3
-	echo m88k-motorola-sysv3
-	exit ;;
-    XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3)
-	echo m88k-tektronix-sysv3
-	exit ;;
-    Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD)
-	echo m68k-tektronix-bsd
-	exit ;;
-    *:IRIX*:*:*)
-	echo mips-sgi-irix`echo ${UNAME_RELEASE}|sed -e 's/-/_/g'`
-	exit ;;
-    ????????:AIX?:[12].1:2)   # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX.
-	echo romp-ibm-aix     # uname -m gives an 8 hex-code CPU id
-	exit ;;               # Note that: echo "'`uname -s`'" gives 'AIX '
-    i*86:AIX:*:*)
-	echo i386-ibm-aix
-	exit ;;
-    ia64:AIX:*:*)
-	if [ -x /usr/bin/oslevel ] ; then
-		IBM_REV=`/usr/bin/oslevel`
-	else
-		IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE}
-	fi
-	echo ${UNAME_MACHINE}-ibm-aix${IBM_REV}
-	exit ;;
-    *:AIX:2:3)
-	if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then
-		eval $set_cc_for_build
-		sed 's/^		//' << EOF >$dummy.c
-		#include <sys/systemcfg.h>
-
-		main()
-			{
-			if (!__power_pc())
-				exit(1);
-			puts("powerpc-ibm-aix3.2.5");
-			exit(0);
-			}
-EOF
-		if $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy`
-		then
-			echo "$SYSTEM_NAME"
-		else
-			echo rs6000-ibm-aix3.2.5
-		fi
-	elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then
-		echo rs6000-ibm-aix3.2.4
-	else
-		echo rs6000-ibm-aix3.2
-	fi
-	exit ;;
-    *:AIX:*:[45])
-	IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'`
-	if /usr/sbin/lsattr -El ${IBM_CPU_ID} | grep ' POWER' >/dev/null 2>&1; then
-		IBM_ARCH=rs6000
-	else
-		IBM_ARCH=powerpc
-	fi
-	if [ -x /usr/bin/oslevel ] ; then
-		IBM_REV=`/usr/bin/oslevel`
-	else
-		IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE}
-	fi
-	echo ${IBM_ARCH}-ibm-aix${IBM_REV}
-	exit ;;
-    *:AIX:*:*)
-	echo rs6000-ibm-aix
-	exit ;;
-    ibmrt:4.4BSD:*|romp-ibm:BSD:*)
-	echo romp-ibm-bsd4.4
-	exit ;;
-    ibmrt:*BSD:*|romp-ibm:BSD:*)            # covers RT/PC BSD and
-	echo romp-ibm-bsd${UNAME_RELEASE}   # 4.3 with uname added to
-	exit ;;                             # report: romp-ibm BSD 4.3
-    *:BOSX:*:*)
-	echo rs6000-bull-bosx
-	exit ;;
-    DPX/2?00:B.O.S.:*:*)
-	echo m68k-bull-sysv3
-	exit ;;
-    9000/[34]??:4.3bsd:1.*:*)
-	echo m68k-hp-bsd
-	exit ;;
-    hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*)
-	echo m68k-hp-bsd4.4
-	exit ;;
-    9000/[34678]??:HP-UX:*:*)
-	HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
-	case "${UNAME_MACHINE}" in
-	    9000/31? )            HP_ARCH=m68000 ;;
-	    9000/[34]?? )         HP_ARCH=m68k ;;
-	    9000/[678][0-9][0-9])
-		if [ -x /usr/bin/getconf ]; then
-		    sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null`
-                    sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null`
-                    case "${sc_cpu_version}" in
-                      523) HP_ARCH="hppa1.0" ;; # CPU_PA_RISC1_0
-                      528) HP_ARCH="hppa1.1" ;; # CPU_PA_RISC1_1
-                      532)                      # CPU_PA_RISC2_0
-                        case "${sc_kernel_bits}" in
-                          32) HP_ARCH="hppa2.0n" ;;
-                          64) HP_ARCH="hppa2.0w" ;;
-			  '') HP_ARCH="hppa2.0" ;;   # HP-UX 10.20
-                        esac ;;
-                    esac
-		fi
-		if [ "${HP_ARCH}" = "" ]; then
-		    eval $set_cc_for_build
-		    sed 's/^              //' << EOF >$dummy.c
-
-              #define _HPUX_SOURCE
-              #include <stdlib.h>
-              #include <unistd.h>
-
-              int main ()
-              {
-              #if defined(_SC_KERNEL_BITS)
-                  long bits = sysconf(_SC_KERNEL_BITS);
-              #endif
-                  long cpu  = sysconf (_SC_CPU_VERSION);
-
-                  switch (cpu)
-              	{
-              	case CPU_PA_RISC1_0: puts ("hppa1.0"); break;
-              	case CPU_PA_RISC1_1: puts ("hppa1.1"); break;
-              	case CPU_PA_RISC2_0:
-              #if defined(_SC_KERNEL_BITS)
-              	    switch (bits)
-              		{
-              		case 64: puts ("hppa2.0w"); break;
-              		case 32: puts ("hppa2.0n"); break;
-              		default: puts ("hppa2.0"); break;
-              		} break;
-              #else  /* !defined(_SC_KERNEL_BITS) */
-              	    puts ("hppa2.0"); break;
-              #endif
-              	default: puts ("hppa1.0"); break;
-              	}
-                  exit (0);
-              }
-EOF
-		    (CCOPTS= $CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null) && HP_ARCH=`$dummy`
-		    test -z "$HP_ARCH" && HP_ARCH=hppa
-		fi ;;
-	esac
-	if [ ${HP_ARCH} = "hppa2.0w" ]
-	then
-	    eval $set_cc_for_build
-
-	    # hppa2.0w-hp-hpux* has a 64-bit kernel and a compiler generating
-	    # 32-bit code.  hppa64-hp-hpux* has the same kernel and a compiler
-	    # generating 64-bit code.  GNU and HP use different nomenclature:
-	    #
-	    # $ CC_FOR_BUILD=cc ./config.guess
-	    # => hppa2.0w-hp-hpux11.23
-	    # $ CC_FOR_BUILD="cc +DA2.0w" ./config.guess
-	    # => hppa64-hp-hpux11.23
-
-	    if echo __LP64__ | (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) |
-		grep __LP64__ >/dev/null
-	    then
-		HP_ARCH="hppa2.0w"
-	    else
-		HP_ARCH="hppa64"
-	    fi
-	fi
-	echo ${HP_ARCH}-hp-hpux${HPUX_REV}
-	exit ;;
-    ia64:HP-UX:*:*)
-	HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
-	echo ia64-hp-hpux${HPUX_REV}
-	exit ;;
-    3050*:HI-UX:*:*)
-	eval $set_cc_for_build
-	sed 's/^	//' << EOF >$dummy.c
-	#include <unistd.h>
-	int
-	main ()
-	{
-	  long cpu = sysconf (_SC_CPU_VERSION);
-	  /* The order matters, because CPU_IS_HP_MC68K erroneously returns
-	     true for CPU_PA_RISC1_0.  CPU_IS_PA_RISC returns correct
-	     results, however.  */
-	  if (CPU_IS_PA_RISC (cpu))
-	    {
-	      switch (cpu)
-		{
-		  case CPU_PA_RISC1_0: puts ("hppa1.0-hitachi-hiuxwe2"); break;
-		  case CPU_PA_RISC1_1: puts ("hppa1.1-hitachi-hiuxwe2"); break;
-		  case CPU_PA_RISC2_0: puts ("hppa2.0-hitachi-hiuxwe2"); break;
-		  default: puts ("hppa-hitachi-hiuxwe2"); break;
-		}
-	    }
-	  else if (CPU_IS_HP_MC68K (cpu))
-	    puts ("m68k-hitachi-hiuxwe2");
-	  else puts ("unknown-hitachi-hiuxwe2");
-	  exit (0);
-	}
-EOF
-	$CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy` &&
-		{ echo "$SYSTEM_NAME"; exit; }
-	echo unknown-hitachi-hiuxwe2
-	exit ;;
-    9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:* )
-	echo hppa1.1-hp-bsd
-	exit ;;
-    9000/8??:4.3bsd:*:*)
-	echo hppa1.0-hp-bsd
-	exit ;;
-    *9??*:MPE/iX:*:* | *3000*:MPE/iX:*:*)
-	echo hppa1.0-hp-mpeix
-	exit ;;
-    hp7??:OSF1:*:* | hp8?[79]:OSF1:*:* )
-	echo hppa1.1-hp-osf
-	exit ;;
-    hp8??:OSF1:*:*)
-	echo hppa1.0-hp-osf
-	exit ;;
-    i*86:OSF1:*:*)
-	if [ -x /usr/sbin/sysversion ] ; then
-	    echo ${UNAME_MACHINE}-unknown-osf1mk
-	else
-	    echo ${UNAME_MACHINE}-unknown-osf1
-	fi
-	exit ;;
-    parisc*:Lites*:*:*)
-	echo hppa1.1-hp-lites
-	exit ;;
-    C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*)
-	echo c1-convex-bsd
-        exit ;;
-    C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*)
-	if getsysinfo -f scalar_acc
-	then echo c32-convex-bsd
-	else echo c2-convex-bsd
-	fi
-        exit ;;
-    C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*)
-	echo c34-convex-bsd
-        exit ;;
-    C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*)
-	echo c38-convex-bsd
-        exit ;;
-    C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*)
-	echo c4-convex-bsd
-        exit ;;
-    CRAY*Y-MP:*:*:*)
-	echo ymp-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
-	exit ;;
-    CRAY*[A-Z]90:*:*:*)
-	echo ${UNAME_MACHINE}-cray-unicos${UNAME_RELEASE} \
-	| sed -e 's/CRAY.*\([A-Z]90\)/\1/' \
-	      -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/ \
-	      -e 's/\.[^.]*$/.X/'
-	exit ;;
-    CRAY*TS:*:*:*)
-	echo t90-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
-	exit ;;
-    CRAY*T3E:*:*:*)
-	echo alphaev5-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
-	exit ;;
-    CRAY*SV1:*:*:*)
-	echo sv1-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
-	exit ;;
-    *:UNICOS/mp:*:*)
-	echo craynv-cray-unicosmp${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
-	exit ;;
-    F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*)
-	FUJITSU_PROC=`uname -m | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
-        FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
-        FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'`
-        echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
-        exit ;;
-    5000:UNIX_System_V:4.*:*)
-        FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
-        FUJITSU_REL=`echo ${UNAME_RELEASE} | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/ /_/'`
-        echo "sparc-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
-	exit ;;
-    i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*)
-	echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE}
-	exit ;;
-    sparc*:BSD/OS:*:*)
-	echo sparc-unknown-bsdi${UNAME_RELEASE}
-	exit ;;
-    *:BSD/OS:*:*)
-	echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE}
-	exit ;;
-    *:FreeBSD:*:*)
-	case ${UNAME_MACHINE} in
-	    pc98)
-		echo i386-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;;
-	    amd64)
-		echo x86_64-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;;
-	    *)
-		echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;;
-	esac
-	exit ;;
-    i*:CYGWIN*:*)
-	echo ${UNAME_MACHINE}-pc-cygwin
-	exit ;;
-    *:MINGW*:*)
-	echo ${UNAME_MACHINE}-pc-mingw32
-	exit ;;
-    i*:windows32*:*)
-    	# uname -m includes "-pc" on this system.
-    	echo ${UNAME_MACHINE}-mingw32
-	exit ;;
-    i*:PW*:*)
-	echo ${UNAME_MACHINE}-pc-pw32
-	exit ;;
-    x86:Interix*:[3456]*)
-	echo i586-pc-interix${UNAME_RELEASE}
-	exit ;;
-    EM64T:Interix*:[3456]* | authenticamd:Interix*:[3456]*)
-	echo x86_64-unknown-interix${UNAME_RELEASE}
-	exit ;;
-    [345]86:Windows_95:* | [345]86:Windows_98:* | [345]86:Windows_NT:*)
-	echo i${UNAME_MACHINE}-pc-mks
-	exit ;;
-    i*:Windows_NT*:* | Pentium*:Windows_NT*:*)
-	# How do we know it's Interix rather than the generic POSIX subsystem?
-	# It also conflicts with pre-2.0 versions of AT&T UWIN. Should we
-	# UNAME_MACHINE based on the output of uname instead of i386?
-	echo i586-pc-interix
-	exit ;;
-    i*:UWIN*:*)
-	echo ${UNAME_MACHINE}-pc-uwin
-	exit ;;
-    amd64:CYGWIN*:*:* | x86_64:CYGWIN*:*:*)
-	echo x86_64-unknown-cygwin
-	exit ;;
-    p*:CYGWIN*:*)
-	echo powerpcle-unknown-cygwin
-	exit ;;
-    prep*:SunOS:5.*:*)
-	echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
-	exit ;;
-    *:GNU:*:*)
-	# the GNU system
-	echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-gnu`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'`
-	exit ;;
-    *:GNU/*:*:*)
-	# other systems with GNU libc and userland
-	echo ${UNAME_MACHINE}-unknown-`echo ${UNAME_SYSTEM} | sed 's,^[^/]*/,,' | tr '[A-Z]' '[a-z]'``echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`-gnu
-	exit ;;
-    i*86:Minix:*:*)
-	echo ${UNAME_MACHINE}-pc-minix
-	exit ;;
-    arm*:Linux:*:*)
-	echo ${UNAME_MACHINE}-unknown-linux-gnu
-	exit ;;
-    avr32*:Linux:*:*)
-	echo ${UNAME_MACHINE}-unknown-linux-gnu
-	exit ;;
-    cris:Linux:*:*)
-	echo cris-axis-linux-gnu
-	exit ;;
-    crisv32:Linux:*:*)
-	echo crisv32-axis-linux-gnu
-	exit ;;
-    frv:Linux:*:*)
-    	echo frv-unknown-linux-gnu
-	exit ;;
-    ia64:Linux:*:*)
-	echo ${UNAME_MACHINE}-unknown-linux-gnu
-	exit ;;
-    m32r*:Linux:*:*)
-	echo ${UNAME_MACHINE}-unknown-linux-gnu
-	exit ;;
-    m68*:Linux:*:*)
-	echo ${UNAME_MACHINE}-unknown-linux-gnu
-	exit ;;
-    mips:Linux:*:*)
-	eval $set_cc_for_build
-	sed 's/^	//' << EOF >$dummy.c
-	#undef CPU
-	#undef mips
-	#undef mipsel
-	#if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL)
-	CPU=mipsel
-	#else
-	#if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB)
-	CPU=mips
-	#else
-	CPU=
-	#endif
-	#endif
-EOF
-	eval "`$CC_FOR_BUILD -E $dummy.c 2>/dev/null | sed -n '
-	    /^CPU/{
-		s: ::g
-		p
-	    }'`"
-	test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; }
-	;;
-    mips64:Linux:*:*)
-	eval $set_cc_for_build
-	sed 's/^	//' << EOF >$dummy.c
-	#undef CPU
-	#undef mips64
-	#undef mips64el
-	#if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL)
-	CPU=mips64el
-	#else
-	#if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB)
-	CPU=mips64
-	#else
-	CPU=
-	#endif
-	#endif
-EOF
-	eval "`$CC_FOR_BUILD -E $dummy.c 2>/dev/null | sed -n '
-	    /^CPU/{
-		s: ::g
-		p
-	    }'`"
-	test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; }
-	;;
-    or32:Linux:*:*)
-	echo or32-unknown-linux-gnu
-	exit ;;
-    ppc:Linux:*:*)
-	echo powerpc-unknown-linux-gnu
-	exit ;;
-    ppc64:Linux:*:*)
-	echo powerpc64-unknown-linux-gnu
-	exit ;;
-    alpha:Linux:*:*)
-	case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in
-	  EV5)   UNAME_MACHINE=alphaev5 ;;
-	  EV56)  UNAME_MACHINE=alphaev56 ;;
-	  PCA56) UNAME_MACHINE=alphapca56 ;;
-	  PCA57) UNAME_MACHINE=alphapca56 ;;
-	  EV6)   UNAME_MACHINE=alphaev6 ;;
-	  EV67)  UNAME_MACHINE=alphaev67 ;;
-	  EV68*) UNAME_MACHINE=alphaev68 ;;
-        esac
-	objdump --private-headers /bin/sh | grep ld.so.1 >/dev/null
-	if test "$?" = 0 ; then LIBC="libc1" ; else LIBC="" ; fi
-	echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC}
-	exit ;;
-    parisc:Linux:*:* | hppa:Linux:*:*)
-	# Look for CPU level
-	case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in
-	  PA7*) echo hppa1.1-unknown-linux-gnu ;;
-	  PA8*) echo hppa2.0-unknown-linux-gnu ;;
-	  *)    echo hppa-unknown-linux-gnu ;;
-	esac
-	exit ;;
-    parisc64:Linux:*:* | hppa64:Linux:*:*)
-	echo hppa64-unknown-linux-gnu
-	exit ;;
-    s390:Linux:*:* | s390x:Linux:*:*)
-	echo ${UNAME_MACHINE}-ibm-linux
-	exit ;;
-    sh64*:Linux:*:*)
-    	echo ${UNAME_MACHINE}-unknown-linux-gnu
-	exit ;;
-    sh*:Linux:*:*)
-	echo ${UNAME_MACHINE}-unknown-linux-gnu
-	exit ;;
-    sparc:Linux:*:* | sparc64:Linux:*:*)
-	echo ${UNAME_MACHINE}-unknown-linux-gnu
-	exit ;;
-    vax:Linux:*:*)
-	echo ${UNAME_MACHINE}-dec-linux-gnu
-	exit ;;
-    x86_64:Linux:*:*)
-	echo x86_64-unknown-linux-gnu
-	exit ;;
-    xtensa:Linux:*:*)
-    	echo xtensa-unknown-linux-gnu
-	exit ;;
-    i*86:Linux:*:*)
-	# The BFD linker knows what the default object file format is, so
-	# first see if it will tell us. cd to the root directory to prevent
-	# problems with other programs or directories called `ld' in the path.
-	# Set LC_ALL=C to ensure ld outputs messages in English.
-	ld_supported_targets=`cd /; LC_ALL=C ld --help 2>&1 \
-			 | sed -ne '/supported targets:/!d
-				    s/[ 	][ 	]*/ /g
-				    s/.*supported targets: *//
-				    s/ .*//
-				    p'`
-        case "$ld_supported_targets" in
-	  elf32-i386)
-		TENTATIVE="${UNAME_MACHINE}-pc-linux-gnu"
-		;;
-	  a.out-i386-linux)
-		echo "${UNAME_MACHINE}-pc-linux-gnuaout"
-		exit ;;
-	  coff-i386)
-		echo "${UNAME_MACHINE}-pc-linux-gnucoff"
-		exit ;;
-	  "")
-		# Either a pre-BFD a.out linker (linux-gnuoldld) or
-		# one that does not give us useful --help.
-		echo "${UNAME_MACHINE}-pc-linux-gnuoldld"
-		exit ;;
-	esac
-	# Determine whether the default compiler is a.out or elf
-	eval $set_cc_for_build
-	sed 's/^	//' << EOF >$dummy.c
-	#include <features.h>
-	#ifdef __ELF__
-	# ifdef __GLIBC__
-	#  if __GLIBC__ >= 2
-	LIBC=gnu
-	#  else
-	LIBC=gnulibc1
-	#  endif
-	# else
-	LIBC=gnulibc1
-	# endif
-	#else
-	#if defined(__INTEL_COMPILER) || defined(__PGI) || defined(__SUNPRO_C) || defined(__SUNPRO_CC)
-	LIBC=gnu
-	#else
-	LIBC=gnuaout
-	#endif
-	#endif
-	#ifdef __dietlibc__
-	LIBC=dietlibc
-	#endif
-EOF
-	eval "`$CC_FOR_BUILD -E $dummy.c 2>/dev/null | sed -n '
-	    /^LIBC/{
-		s: ::g
-		p
-	    }'`"
-	test x"${LIBC}" != x && {
-		echo "${UNAME_MACHINE}-pc-linux-${LIBC}"
-		exit
-	}
-	test x"${TENTATIVE}" != x && { echo "${TENTATIVE}"; exit; }
-	;;
-    i*86:DYNIX/ptx:4*:*)
-	# ptx 4.0 does uname -s correctly, with DYNIX/ptx in there.
-	# earlier versions are messed up and put the nodename in both
-	# sysname and nodename.
-	echo i386-sequent-sysv4
-	exit ;;
-    i*86:UNIX_SV:4.2MP:2.*)
-        # Unixware is an offshoot of SVR4, but it has its own version
-        # number series starting with 2...
-        # I am not positive that other SVR4 systems won't match this,
-	# I just have to hope.  -- rms.
-        # Use sysv4.2uw... so that sysv4* matches it.
-	echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION}
-	exit ;;
-    i*86:OS/2:*:*)
-	# If we were able to find `uname', then EMX Unix compatibility
-	# is probably installed.
-	echo ${UNAME_MACHINE}-pc-os2-emx
-	exit ;;
-    i*86:XTS-300:*:STOP)
-	echo ${UNAME_MACHINE}-unknown-stop
-	exit ;;
-    i*86:atheos:*:*)
-	echo ${UNAME_MACHINE}-unknown-atheos
-	exit ;;
-    i*86:syllable:*:*)
-	echo ${UNAME_MACHINE}-pc-syllable
-	exit ;;
-    i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.0*:*)
-	echo i386-unknown-lynxos${UNAME_RELEASE}
-	exit ;;
-    i*86:*DOS:*:*)
-	echo ${UNAME_MACHINE}-pc-msdosdjgpp
-	exit ;;
-    i*86:*:4.*:* | i*86:SYSTEM_V:4.*:*)
-	UNAME_REL=`echo ${UNAME_RELEASE} | sed 's/\/MP$//'`
-	if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then
-		echo ${UNAME_MACHINE}-univel-sysv${UNAME_REL}
-	else
-		echo ${UNAME_MACHINE}-pc-sysv${UNAME_REL}
-	fi
-	exit ;;
-    i*86:*:5:[678]*)
-    	# UnixWare 7.x, OpenUNIX and OpenServer 6.
-	case `/bin/uname -X | grep "^Machine"` in
-	    *486*)	     UNAME_MACHINE=i486 ;;
-	    *Pentium)	     UNAME_MACHINE=i586 ;;
-	    *Pent*|*Celeron) UNAME_MACHINE=i686 ;;
-	esac
-	echo ${UNAME_MACHINE}-unknown-sysv${UNAME_RELEASE}${UNAME_SYSTEM}${UNAME_VERSION}
-	exit ;;
-    i*86:*:3.2:*)
-	if test -f /usr/options/cb.name; then
-		UNAME_REL=`sed -n 's/.*Version //p' </usr/options/cb.name`
-		echo ${UNAME_MACHINE}-pc-isc$UNAME_REL
-	elif /bin/uname -X 2>/dev/null >/dev/null ; then
-		UNAME_REL=`(/bin/uname -X|grep Release|sed -e 's/.*= //')`
-		(/bin/uname -X|grep i80486 >/dev/null) && UNAME_MACHINE=i486
-		(/bin/uname -X|grep '^Machine.*Pentium' >/dev/null) \
-			&& UNAME_MACHINE=i586
-		(/bin/uname -X|grep '^Machine.*Pent *II' >/dev/null) \
-			&& UNAME_MACHINE=i686
-		(/bin/uname -X|grep '^Machine.*Pentium Pro' >/dev/null) \
-			&& UNAME_MACHINE=i686
-		echo ${UNAME_MACHINE}-pc-sco$UNAME_REL
-	else
-		echo ${UNAME_MACHINE}-pc-sysv32
-	fi
-	exit ;;
-    pc:*:*:*)
-	# Left here for compatibility:
-        # uname -m prints for DJGPP always 'pc', but it prints nothing about
-        # the processor, so we play safe by assuming i386.
-	echo i386-pc-msdosdjgpp
-        exit ;;
-    Intel:Mach:3*:*)
-	echo i386-pc-mach3
-	exit ;;
-    paragon:*:*:*)
-	echo i860-intel-osf1
-	exit ;;
-    i860:*:4.*:*) # i860-SVR4
-	if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then
-	  echo i860-stardent-sysv${UNAME_RELEASE} # Stardent Vistra i860-SVR4
-	else # Add other i860-SVR4 vendors below as they are discovered.
-	  echo i860-unknown-sysv${UNAME_RELEASE}  # Unknown i860-SVR4
-	fi
-	exit ;;
-    mini*:CTIX:SYS*5:*)
-	# "miniframe"
-	echo m68010-convergent-sysv
-	exit ;;
-    mc68k:UNIX:SYSTEM5:3.51m)
-	echo m68k-convergent-sysv
-	exit ;;
-    M680?0:D-NIX:5.3:*)
-	echo m68k-diab-dnix
-	exit ;;
-    M68*:*:R3V[5678]*:*)
-	test -r /sysV68 && { echo 'm68k-motorola-sysv'; exit; } ;;
-    3[345]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0 | SDS2:*:4.0:3.0 | SHG2:*:4.0:3.0 | S7501*:*:4.0:3.0)
-	OS_REL=''
-	test -r /etc/.relid \
-	&& OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid`
-	/bin/uname -p 2>/dev/null | grep 86 >/dev/null \
-	  && { echo i486-ncr-sysv4.3${OS_REL}; exit; }
-	/bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \
-	  && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;;
-    3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*)
-        /bin/uname -p 2>/dev/null | grep 86 >/dev/null \
-          && { echo i486-ncr-sysv4; exit; } ;;
-    m68*:LynxOS:2.*:* | m68*:LynxOS:3.0*:*)
-	echo m68k-unknown-lynxos${UNAME_RELEASE}
-	exit ;;
-    mc68030:UNIX_System_V:4.*:*)
-	echo m68k-atari-sysv4
-	exit ;;
-    TSUNAMI:LynxOS:2.*:*)
-	echo sparc-unknown-lynxos${UNAME_RELEASE}
-	exit ;;
-    rs6000:LynxOS:2.*:*)
-	echo rs6000-unknown-lynxos${UNAME_RELEASE}
-	exit ;;
-    PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.0*:*)
-	echo powerpc-unknown-lynxos${UNAME_RELEASE}
-	exit ;;
-    SM[BE]S:UNIX_SV:*:*)
-	echo mips-dde-sysv${UNAME_RELEASE}
-	exit ;;
-    RM*:ReliantUNIX-*:*:*)
-	echo mips-sni-sysv4
-	exit ;;
-    RM*:SINIX-*:*:*)
-	echo mips-sni-sysv4
-	exit ;;
-    *:SINIX-*:*:*)
-	if uname -p 2>/dev/null >/dev/null ; then
-		UNAME_MACHINE=`(uname -p) 2>/dev/null`
-		echo ${UNAME_MACHINE}-sni-sysv4
-	else
-		echo ns32k-sni-sysv
-	fi
-	exit ;;
-    PENTIUM:*:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort
-                      # says <Richard.M.Bartel@ccMail.Census.GOV>
-        echo i586-unisys-sysv4
-        exit ;;
-    *:UNIX_System_V:4*:FTX*)
-	# From Gerald Hewes <hewes@openmarket.com>.
-	# How about differentiating between stratus architectures? -djm
-	echo hppa1.1-stratus-sysv4
-	exit ;;
-    *:*:*:FTX*)
-	# From seanf@swdc.stratus.com.
-	echo i860-stratus-sysv4
-	exit ;;
-    i*86:VOS:*:*)
-	# From Paul.Green@stratus.com.
-	echo ${UNAME_MACHINE}-stratus-vos
-	exit ;;
-    *:VOS:*:*)
-	# From Paul.Green@stratus.com.
-	echo hppa1.1-stratus-vos
-	exit ;;
-    mc68*:A/UX:*:*)
-	echo m68k-apple-aux${UNAME_RELEASE}
-	exit ;;
-    news*:NEWS-OS:6*:*)
-	echo mips-sony-newsos6
-	exit ;;
-    R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*)
-	if [ -d /usr/nec ]; then
-	        echo mips-nec-sysv${UNAME_RELEASE}
-	else
-	        echo mips-unknown-sysv${UNAME_RELEASE}
-	fi
-        exit ;;
-    BeBox:BeOS:*:*)	# BeOS running on hardware made by Be, PPC only.
-	echo powerpc-be-beos
-	exit ;;
-    BeMac:BeOS:*:*)	# BeOS running on Mac or Mac clone, PPC only.
-	echo powerpc-apple-beos
-	exit ;;
-    BePC:BeOS:*:*)	# BeOS running on Intel PC compatible.
-	echo i586-pc-beos
-	exit ;;
-    SX-4:SUPER-UX:*:*)
-	echo sx4-nec-superux${UNAME_RELEASE}
-	exit ;;
-    SX-5:SUPER-UX:*:*)
-	echo sx5-nec-superux${UNAME_RELEASE}
-	exit ;;
-    SX-6:SUPER-UX:*:*)
-	echo sx6-nec-superux${UNAME_RELEASE}
-	exit ;;
-    SX-7:SUPER-UX:*:*)
-	echo sx7-nec-superux${UNAME_RELEASE}
-	exit ;;
-    SX-8:SUPER-UX:*:*)
-	echo sx8-nec-superux${UNAME_RELEASE}
-	exit ;;
-    SX-8R:SUPER-UX:*:*)
-	echo sx8r-nec-superux${UNAME_RELEASE}
-	exit ;;
-    Power*:Rhapsody:*:*)
-	echo powerpc-apple-rhapsody${UNAME_RELEASE}
-	exit ;;
-    *:Rhapsody:*:*)
-	echo ${UNAME_MACHINE}-apple-rhapsody${UNAME_RELEASE}
-	exit ;;
-    *:Darwin:*:*)
-	UNAME_PROCESSOR=`uname -p` || UNAME_PROCESSOR=unknown
-	case $UNAME_PROCESSOR in
-	    unknown) UNAME_PROCESSOR=powerpc ;;
-	esac
-	echo ${UNAME_PROCESSOR}-apple-darwin${UNAME_RELEASE}
-	exit ;;
-    *:procnto*:*:* | *:QNX:[0123456789]*:*)
-	UNAME_PROCESSOR=`uname -p`
-	if test "$UNAME_PROCESSOR" = "x86"; then
-		UNAME_PROCESSOR=i386
-		UNAME_MACHINE=pc
-	fi
-	echo ${UNAME_PROCESSOR}-${UNAME_MACHINE}-nto-qnx${UNAME_RELEASE}
-	exit ;;
-    *:QNX:*:4*)
-	echo i386-pc-qnx
-	exit ;;
-    NSE-?:NONSTOP_KERNEL:*:*)
-	echo nse-tandem-nsk${UNAME_RELEASE}
-	exit ;;
-    NSR-?:NONSTOP_KERNEL:*:*)
-	echo nsr-tandem-nsk${UNAME_RELEASE}
-	exit ;;
-    *:NonStop-UX:*:*)
-	echo mips-compaq-nonstopux
-	exit ;;
-    BS2000:POSIX*:*:*)
-	echo bs2000-siemens-sysv
-	exit ;;
-    DS/*:UNIX_System_V:*:*)
-	echo ${UNAME_MACHINE}-${UNAME_SYSTEM}-${UNAME_RELEASE}
-	exit ;;
-    *:Plan9:*:*)
-	# "uname -m" is not consistent, so use $cputype instead. 386
-	# is converted to i386 for consistency with other x86
-	# operating systems.
-	if test "$cputype" = "386"; then
-	    UNAME_MACHINE=i386
-	else
-	    UNAME_MACHINE="$cputype"
-	fi
-	echo ${UNAME_MACHINE}-unknown-plan9
-	exit ;;
-    *:TOPS-10:*:*)
-	echo pdp10-unknown-tops10
-	exit ;;
-    *:TENEX:*:*)
-	echo pdp10-unknown-tenex
-	exit ;;
-    KS10:TOPS-20:*:* | KL10:TOPS-20:*:* | TYPE4:TOPS-20:*:*)
-	echo pdp10-dec-tops20
-	exit ;;
-    XKL-1:TOPS-20:*:* | TYPE5:TOPS-20:*:*)
-	echo pdp10-xkl-tops20
-	exit ;;
-    *:TOPS-20:*:*)
-	echo pdp10-unknown-tops20
-	exit ;;
-    *:ITS:*:*)
-	echo pdp10-unknown-its
-	exit ;;
-    SEI:*:*:SEIUX)
-        echo mips-sei-seiux${UNAME_RELEASE}
-	exit ;;
-    *:DragonFly:*:*)
-	echo ${UNAME_MACHINE}-unknown-dragonfly`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`
-	exit ;;
-    *:*VMS:*:*)
-    	UNAME_MACHINE=`(uname -p) 2>/dev/null`
-	case "${UNAME_MACHINE}" in
-	    A*) echo alpha-dec-vms ; exit ;;
-	    I*) echo ia64-dec-vms ; exit ;;
-	    V*) echo vax-dec-vms ; exit ;;
-	esac ;;
-    *:XENIX:*:SysV)
-	echo i386-pc-xenix
-	exit ;;
-    i*86:skyos:*:*)
-	echo ${UNAME_MACHINE}-pc-skyos`echo ${UNAME_RELEASE}` | sed -e 's/ .*$//'
-	exit ;;
-    i*86:rdos:*:*)
-	echo ${UNAME_MACHINE}-pc-rdos
-	exit ;;
-esac
-
-#echo '(No uname command or uname output not recognized.)' 1>&2
-#echo "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" 1>&2
-
-eval $set_cc_for_build
-cat >$dummy.c <<EOF
-#ifdef _SEQUENT_
-# include <sys/types.h>
-# include <sys/utsname.h>
-#endif
-main ()
-{
-#if defined (sony)
-#if defined (MIPSEB)
-  /* BFD wants "bsd" instead of "newsos".  Perhaps BFD should be changed,
-     I don't know....  */
-  printf ("mips-sony-bsd\n"); exit (0);
-#else
-#include <sys/param.h>
-  printf ("m68k-sony-newsos%s\n",
-#ifdef NEWSOS4
-          "4"
-#else
-	  ""
-#endif
-         ); exit (0);
-#endif
-#endif
-
-#if defined (__arm) && defined (__acorn) && defined (__unix)
-  printf ("arm-acorn-riscix\n"); exit (0);
-#endif
-
-#if defined (hp300) && !defined (hpux)
-  printf ("m68k-hp-bsd\n"); exit (0);
-#endif
-
-#if defined (NeXT)
-#if !defined (__ARCHITECTURE__)
-#define __ARCHITECTURE__ "m68k"
-#endif
-  int version;
-  version=`(hostinfo | sed -n 's/.*NeXT Mach \([0-9]*\).*/\1/p') 2>/dev/null`;
-  if (version < 4)
-    printf ("%s-next-nextstep%d\n", __ARCHITECTURE__, version);
-  else
-    printf ("%s-next-openstep%d\n", __ARCHITECTURE__, version);
-  exit (0);
-#endif
-
-#if defined (MULTIMAX) || defined (n16)
-#if defined (UMAXV)
-  printf ("ns32k-encore-sysv\n"); exit (0);
-#else
-#if defined (CMU)
-  printf ("ns32k-encore-mach\n"); exit (0);
-#else
-  printf ("ns32k-encore-bsd\n"); exit (0);
-#endif
-#endif
-#endif
-
-#if defined (__386BSD__)
-  printf ("i386-pc-bsd\n"); exit (0);
-#endif
-
-#if defined (sequent)
-#if defined (i386)
-  printf ("i386-sequent-dynix\n"); exit (0);
-#endif
-#if defined (ns32000)
-  printf ("ns32k-sequent-dynix\n"); exit (0);
-#endif
-#endif
-
-#if defined (_SEQUENT_)
-    struct utsname un;
-
-    uname(&un);
-
-    if (strncmp(un.version, "V2", 2) == 0) {
-	printf ("i386-sequent-ptx2\n"); exit (0);
-    }
-    if (strncmp(un.version, "V1", 2) == 0) { /* XXX is V1 correct? */
-	printf ("i386-sequent-ptx1\n"); exit (0);
-    }
-    printf ("i386-sequent-ptx\n"); exit (0);
-
-#endif
-
-#if defined (vax)
-# if !defined (ultrix)
-#  include <sys/param.h>
-#  if defined (BSD)
-#   if BSD == 43
-      printf ("vax-dec-bsd4.3\n"); exit (0);
-#   else
-#    if BSD == 199006
-      printf ("vax-dec-bsd4.3reno\n"); exit (0);
-#    else
-      printf ("vax-dec-bsd\n"); exit (0);
-#    endif
-#   endif
-#  else
-    printf ("vax-dec-bsd\n"); exit (0);
-#  endif
-# else
-    printf ("vax-dec-ultrix\n"); exit (0);
-# endif
-#endif
-
-#if defined (alliant) && defined (i860)
-  printf ("i860-alliant-bsd\n"); exit (0);
-#endif
-
-  exit (1);
-}
-EOF
-
-$CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null && SYSTEM_NAME=`$dummy` &&
-	{ echo "$SYSTEM_NAME"; exit; }
-
-# Apollos put the system type in the environment.
-
-test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit; }
-
-# Convex versions that predate uname can use getsysinfo(1)
-
-if [ -x /usr/convex/getsysinfo ]
-then
-    case `getsysinfo -f cpu_type` in
-    c1*)
-	echo c1-convex-bsd
-	exit ;;
-    c2*)
-	if getsysinfo -f scalar_acc
-	then echo c32-convex-bsd
-	else echo c2-convex-bsd
-	fi
-	exit ;;
-    c34*)
-	echo c34-convex-bsd
-	exit ;;
-    c38*)
-	echo c38-convex-bsd
-	exit ;;
-    c4*)
-	echo c4-convex-bsd
-	exit ;;
-    esac
-fi
-
-cat >&2 <<EOF
-$0: unable to guess system type
-
-This script, last modified $timestamp, has failed to recognize
-the operating system you are using. It is advised that you
-download the most up to date version of the config scripts from
-
-  http://savannah.gnu.org/cgi-bin/viewcvs/*checkout*/config/config/config.guess
-and
-  http://savannah.gnu.org/cgi-bin/viewcvs/*checkout*/config/config/config.sub
-
-If the version you run ($0) is already up to date, please
-send the following data and any information you think might be
-pertinent to <config-patches@gnu.org> in order to provide the needed
-information to handle your system.
-
-config.guess timestamp = $timestamp
-
-uname -m = `(uname -m) 2>/dev/null || echo unknown`
-uname -r = `(uname -r) 2>/dev/null || echo unknown`
-uname -s = `(uname -s) 2>/dev/null || echo unknown`
-uname -v = `(uname -v) 2>/dev/null || echo unknown`
-
-/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null`
-/bin/uname -X     = `(/bin/uname -X) 2>/dev/null`
-
-hostinfo               = `(hostinfo) 2>/dev/null`
-/bin/universe          = `(/bin/universe) 2>/dev/null`
-/usr/bin/arch -k       = `(/usr/bin/arch -k) 2>/dev/null`
-/bin/arch              = `(/bin/arch) 2>/dev/null`
-/usr/bin/oslevel       = `(/usr/bin/oslevel) 2>/dev/null`
-/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null`
-
-UNAME_MACHINE = ${UNAME_MACHINE}
-UNAME_RELEASE = ${UNAME_RELEASE}
-UNAME_SYSTEM  = ${UNAME_SYSTEM}
-UNAME_VERSION = ${UNAME_VERSION}
-EOF
-
-exit 1
-
-# Local variables:
-# eval: (add-hook 'write-file-hooks 'time-stamp)
-# time-stamp-start: "timestamp='"
-# time-stamp-format: "%:y-%02m-%02d"
-# time-stamp-end: "'"
-# End:
diff -Nru /tmp/bxdedfLB6u/uriparser-0.6.0/config.sub /tmp/fLjZ2dz9P3/uriparser-0.7.4/config.sub
--- uriparser-0.6.0/config.sub	2007-03-24 12:42:51.000000000 +0000
+++ uriparser-0.7.4/config.sub	1970-01-01 01:00:00.000000000 +0100
@@ -1,1622 +0,0 @@
-#! /bin/sh
-# Configuration validation subroutine script.
-#   Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
-#   2000, 2001, 2002, 2003, 2004, 2005, 2006 Free Software Foundation,
-#   Inc.
-
-timestamp='2007-01-18'
-
-# This file is (in principle) common to ALL GNU software.
-# The presence of a machine in this file suggests that SOME GNU software
-# can handle that machine.  It does not imply ALL GNU software can.
-#
-# This file is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA
-# 02110-1301, USA.
-#
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-
-# Please send patches to <config-patches@gnu.org>.  Submit a context
-# diff and a properly formatted ChangeLog entry.
-#
-# Configuration subroutine to validate and canonicalize a configuration type.
-# Supply the specified configuration type as an argument.
-# If it is invalid, we print an error message on stderr and exit with code 1.
-# Otherwise, we print the canonical config type on stdout and succeed.
-
-# This file is supposed to be the same for all GNU packages
-# and recognize all the CPU types, system types and aliases
-# that are meaningful with *any* GNU software.
-# Each package is responsible for reporting which valid configurations
-# it does not support.  The user should be able to distinguish
-# a failure to support a valid configuration from a meaningless
-# configuration.
-
-# The goal of this file is to map all the various variations of a given
-# machine specification into a single specification in the form:
-#	CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM
-# or in some cases, the newer four-part form:
-#	CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM
-# It is wrong to echo any other type of specification.
-
-me=`echo "$0" | sed -e 's,.*/,,'`
-
-usage="\
-Usage: $0 [OPTION] CPU-MFR-OPSYS
-       $0 [OPTION] ALIAS
-
-Canonicalize a configuration name.
-
-Operation modes:
-  -h, --help         print this help, then exit
-  -t, --time-stamp   print date of last modification, then exit
-  -v, --version      print version number, then exit
-
-Report bugs and patches to <config-patches@gnu.org>."
-
-version="\
-GNU config.sub ($timestamp)
-
-Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
-Free Software Foundation, Inc.
-
-This is free software; see the source for copying conditions.  There is NO
-warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
-
-help="
-Try \`$me --help' for more information."
-
-# Parse command line
-while test $# -gt 0 ; do
-  case $1 in
-    --time-stamp | --time* | -t )
-       echo "$timestamp" ; exit ;;
-    --version | -v )
-       echo "$version" ; exit ;;
-    --help | --h* | -h )
-       echo "$usage"; exit ;;
-    -- )     # Stop option processing
-       shift; break ;;
-    - )	# Use stdin as input.
-       break ;;
-    -* )
-       echo "$me: invalid option $1$help"
-       exit 1 ;;
-
-    *local*)
-       # First pass through any local machine types.
-       echo $1
-       exit ;;
-
-    * )
-       break ;;
-  esac
-done
-
-case $# in
- 0) echo "$me: missing argument$help" >&2
-    exit 1;;
- 1) ;;
- *) echo "$me: too many arguments$help" >&2
-    exit 1;;
-esac
-
-# Separate what the user gave into CPU-COMPANY and OS or KERNEL-OS (if any).
-# Here we must recognize all the valid KERNEL-OS combinations.
-maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'`
-case $maybe_os in
-  nto-qnx* | linux-gnu* | linux-dietlibc | linux-newlib* | linux-uclibc* | \
-  uclinux-uclibc* | uclinux-gnu* | kfreebsd*-gnu* | knetbsd*-gnu* | netbsd*-gnu* | \
-  storm-chaos* | os2-emx* | rtmk-nova*)
-    os=-$maybe_os
-    basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`
-    ;;
-  *)
-    basic_machine=`echo $1 | sed 's/-[^-]*$//'`
-    if [ $basic_machine != $1 ]
-    then os=`echo $1 | sed 's/.*-/-/'`
-    else os=; fi
-    ;;
-esac
-
-### Let's recognize common machines as not being operating systems so
-### that things like config.sub decstation-3100 work.  We also
-### recognize some manufacturers as not being operating systems, so we
-### can provide default operating systems below.
-case $os in
-	-sun*os*)
-		# Prevent following clause from handling this invalid input.
-		;;
-	-dec* | -mips* | -sequent* | -encore* | -pc532* | -sgi* | -sony* | \
-	-att* | -7300* | -3300* | -delta* | -motorola* | -sun[234]* | \
-	-unicom* | -ibm* | -next | -hp | -isi* | -apollo | -altos* | \
-	-convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\
-	-c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \
-	-harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \
-	-apple | -axis | -knuth | -cray)
-		os=
-		basic_machine=$1
-		;;
-	-sim | -cisco | -oki | -wec | -winbond)
-		os=
-		basic_machine=$1
-		;;
-	-scout)
-		;;
-	-wrs)
-		os=-vxworks
-		basic_machine=$1
-		;;
-	-chorusos*)
-		os=-chorusos
-		basic_machine=$1
-		;;
- 	-chorusrdb)
- 		os=-chorusrdb
-		basic_machine=$1
- 		;;
-	-hiux*)
-		os=-hiuxwe2
-		;;
-	-sco6)
-		os=-sco5v6
-		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
-		;;
-	-sco5)
-		os=-sco3.2v5
-		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
-		;;
-	-sco4)
-		os=-sco3.2v4
-		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
-		;;
-	-sco3.2.[4-9]*)
-		os=`echo $os | sed -e 's/sco3.2./sco3.2v/'`
-		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
-		;;
-	-sco3.2v[4-9]*)
-		# Don't forget version if it is 3.2v4 or newer.
-		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
-		;;
-	-sco5v6*)
-		# Don't forget version if it is 3.2v4 or newer.
-		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
-		;;
-	-sco*)
-		os=-sco3.2v2
-		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
-		;;
-	-udk*)
-		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
-		;;
-	-isc)
-		os=-isc2.2
-		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
-		;;
-	-clix*)
-		basic_machine=clipper-intergraph
-		;;
-	-isc*)
-		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
-		;;
-	-lynx*)
-		os=-lynxos
-		;;
-	-ptx*)
-		basic_machine=`echo $1 | sed -e 's/86-.*/86-sequent/'`
-		;;
-	-windowsnt*)
-		os=`echo $os | sed -e 's/windowsnt/winnt/'`
-		;;
-	-psos*)
-		os=-psos
-		;;
-	-mint | -mint[0-9]*)
-		basic_machine=m68k-atari
-		os=-mint
-		;;
-esac
-
-# Decode aliases for certain CPU-COMPANY combinations.
-case $basic_machine in
-	# Recognize the basic CPU types without company name.
-	# Some are omitted here because they have special meanings below.
-	1750a | 580 \
-	| a29k \
-	| alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \
-	| alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] | alpha64pca5[67] \
-	| am33_2.0 \
-	| arc | arm | arm[bl]e | arme[lb] | armv[2345] | armv[345][lb] | avr | avr32 \
-	| bfin \
-	| c4x | clipper \
-	| d10v | d30v | dlx | dsp16xx \
-	| fido | fr30 | frv \
-	| h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \
-	| i370 | i860 | i960 | ia64 \
-	| ip2k | iq2000 \
-	| m32c | m32r | m32rle | m68000 | m68k | m88k \
-	| maxq | mb | microblaze | mcore | mep \
-	| mips | mipsbe | mipseb | mipsel | mipsle \
-	| mips16 \
-	| mips64 | mips64el \
-	| mips64vr | mips64vrel \
-	| mips64orion | mips64orionel \
-	| mips64vr4100 | mips64vr4100el \
-	| mips64vr4300 | mips64vr4300el \
-	| mips64vr5000 | mips64vr5000el \
-	| mips64vr5900 | mips64vr5900el \
-	| mipsisa32 | mipsisa32el \
-	| mipsisa32r2 | mipsisa32r2el \
-	| mipsisa64 | mipsisa64el \
-	| mipsisa64r2 | mipsisa64r2el \
-	| mipsisa64sb1 | mipsisa64sb1el \
-	| mipsisa64sr71k | mipsisa64sr71kel \
-	| mipstx39 | mipstx39el \
-	| mn10200 | mn10300 \
-	| mt \
-	| msp430 \
-	| nios | nios2 \
-	| ns16k | ns32k \
-	| or32 \
-	| pdp10 | pdp11 | pj | pjl \
-	| powerpc | powerpc64 | powerpc64le | powerpcle | ppcbe \
-	| pyramid \
-	| score \
-	| sh | sh[1234] | sh[24]a | sh[23]e | sh[34]eb | sheb | shbe | shle | sh[1234]le | sh3ele \
-	| sh64 | sh64le \
-	| sparc | sparc64 | sparc64b | sparc64v | sparc86x | sparclet | sparclite \
-	| sparcv8 | sparcv9 | sparcv9b | sparcv9v \
-	| spu | strongarm \
-	| tahoe | thumb | tic4x | tic80 | tron \
-	| v850 | v850e \
-	| we32k \
-	| x86 | xc16x | xscale | xscalee[bl] | xstormy16 | xtensa \
-	| z8k)
-		basic_machine=$basic_machine-unknown
-		;;
-	m6811 | m68hc11 | m6812 | m68hc12)
-		# Motorola 68HC11/12.
-		basic_machine=$basic_machine-unknown
-		os=-none
-		;;
-	m88110 | m680[12346]0 | m683?2 | m68360 | m5200 | v70 | w65 | z8k)
-		;;
-	ms1)
-		basic_machine=mt-unknown
-		;;
-
-	# We use `pc' rather than `unknown'
-	# because (1) that's what they normally are, and
-	# (2) the word "unknown" tends to confuse beginning users.
-	i*86 | x86_64)
-	  basic_machine=$basic_machine-pc
-	  ;;
-	# Object if more than one company name word.
-	*-*-*)
-		echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2
-		exit 1
-		;;
-	# Recognize the basic CPU types with company name.
-	580-* \
-	| a29k-* \
-	| alpha-* | alphaev[4-8]-* | alphaev56-* | alphaev6[78]-* \
-	| alpha64-* | alpha64ev[4-8]-* | alpha64ev56-* | alpha64ev6[78]-* \
-	| alphapca5[67]-* | alpha64pca5[67]-* | arc-* \
-	| arm-*  | armbe-* | armle-* | armeb-* | armv*-* \
-	| avr-* | avr32-* \
-	| bfin-* | bs2000-* \
-	| c[123]* | c30-* | [cjt]90-* | c4x-* | c54x-* | c55x-* | c6x-* \
-	| clipper-* | craynv-* | cydra-* \
-	| d10v-* | d30v-* | dlx-* \
-	| elxsi-* \
-	| f30[01]-* | f700-* | fido-* | fr30-* | frv-* | fx80-* \
-	| h8300-* | h8500-* \
-	| hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \
-	| i*86-* | i860-* | i960-* | ia64-* \
-	| ip2k-* | iq2000-* \
-	| m32c-* | m32r-* | m32rle-* \
-	| m68000-* | m680[012346]0-* | m68360-* | m683?2-* | m68k-* \
-	| m88110-* | m88k-* | maxq-* | mcore-* \
-	| mips-* | mipsbe-* | mipseb-* | mipsel-* | mipsle-* \
-	| mips16-* \
-	| mips64-* | mips64el-* \
-	| mips64vr-* | mips64vrel-* \
-	| mips64orion-* | mips64orionel-* \
-	| mips64vr4100-* | mips64vr4100el-* \
-	| mips64vr4300-* | mips64vr4300el-* \
-	| mips64vr5000-* | mips64vr5000el-* \
-	| mips64vr5900-* | mips64vr5900el-* \
-	| mipsisa32-* | mipsisa32el-* \
-	| mipsisa32r2-* | mipsisa32r2el-* \
-	| mipsisa64-* | mipsisa64el-* \
-	| mipsisa64r2-* | mipsisa64r2el-* \
-	| mipsisa64sb1-* | mipsisa64sb1el-* \
-	| mipsisa64sr71k-* | mipsisa64sr71kel-* \
-	| mipstx39-* | mipstx39el-* \
-	| mmix-* \
-	| mt-* \
-	| msp430-* \
-	| nios-* | nios2-* \
-	| none-* | np1-* | ns16k-* | ns32k-* \
-	| orion-* \
-	| pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \
-	| powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* | ppcbe-* \
-	| pyramid-* \
-	| romp-* | rs6000-* \
-	| sh-* | sh[1234]-* | sh[24]a-* | sh[23]e-* | sh[34]eb-* | sheb-* | shbe-* \
-	| shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \
-	| sparc-* | sparc64-* | sparc64b-* | sparc64v-* | sparc86x-* | sparclet-* \
-	| sparclite-* \
-	| sparcv8-* | sparcv9-* | sparcv9b-* | sparcv9v-* | strongarm-* | sv1-* | sx?-* \
-	| tahoe-* | thumb-* \
-	| tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* \
-	| tron-* \
-	| v850-* | v850e-* | vax-* \
-	| we32k-* \
-	| x86-* | x86_64-* | xc16x-* | xps100-* | xscale-* | xscalee[bl]-* \
-	| xstormy16-* | xtensa-* \
-	| ymp-* \
-	| z8k-*)
-		;;
-	# Recognize the various machine names and aliases which stand
-	# for a CPU type and a company and sometimes even an OS.
-	386bsd)
-		basic_machine=i386-unknown
-		os=-bsd
-		;;
-	3b1 | 7300 | 7300-att | att-7300 | pc7300 | safari | unixpc)
-		basic_machine=m68000-att
-		;;
-	3b*)
-		basic_machine=we32k-att
-		;;
-	a29khif)
-		basic_machine=a29k-amd
-		os=-udi
-		;;
-    	abacus)
-		basic_machine=abacus-unknown
-		;;
-	adobe68k)
-		basic_machine=m68010-adobe
-		os=-scout
-		;;
-	alliant | fx80)
-		basic_machine=fx80-alliant
-		;;
-	altos | altos3068)
-		basic_machine=m68k-altos
-		;;
-	am29k)
-		basic_machine=a29k-none
-		os=-bsd
-		;;
-	amd64)
-		basic_machine=x86_64-pc
-		;;
-	amd64-*)
-		basic_machine=x86_64-`echo $basic_machine | sed 's/^[^-]*-//'`
-		;;
-	amdahl)
-		basic_machine=580-amdahl
-		os=-sysv
-		;;
-	amiga | amiga-*)
-		basic_machine=m68k-unknown
-		;;
-	amigaos | amigados)
-		basic_machine=m68k-unknown
-		os=-amigaos
-		;;
-	amigaunix | amix)
-		basic_machine=m68k-unknown
-		os=-sysv4
-		;;
-	apollo68)
-		basic_machine=m68k-apollo
-		os=-sysv
-		;;
-	apollo68bsd)
-		basic_machine=m68k-apollo
-		os=-bsd
-		;;
-	aux)
-		basic_machine=m68k-apple
-		os=-aux
-		;;
-	balance)
-		basic_machine=ns32k-sequent
-		os=-dynix
-		;;
-	c90)
-		basic_machine=c90-cray
-		os=-unicos
-		;;
-	convex-c1)
-		basic_machine=c1-convex
-		os=-bsd
-		;;
-	convex-c2)
-		basic_machine=c2-convex
-		os=-bsd
-		;;
-	convex-c32)
-		basic_machine=c32-convex
-		os=-bsd
-		;;
-	convex-c34)
-		basic_machine=c34-convex
-		os=-bsd
-		;;
-	convex-c38)
-		basic_machine=c38-convex
-		os=-bsd
-		;;
-	cray | j90)
-		basic_machine=j90-cray
-		os=-unicos
-		;;
-	craynv)
-		basic_machine=craynv-cray
-		os=-unicosmp
-		;;
-	cr16c)
-		basic_machine=cr16c-unknown
-		os=-elf
-		;;
-	crds | unos)
-		basic_machine=m68k-crds
-		;;
-	crisv32 | crisv32-* | etraxfs*)
-		basic_machine=crisv32-axis
-		;;
-	cris | cris-* | etrax*)
-		basic_machine=cris-axis
-		;;
-	crx)
-		basic_machine=crx-unknown
-		os=-elf
-		;;
-	da30 | da30-*)
-		basic_machine=m68k-da30
-		;;
-	decstation | decstation-3100 | pmax | pmax-* | pmin | dec3100 | decstatn)
-		basic_machine=mips-dec
-		;;
-	decsystem10* | dec10*)
-		basic_machine=pdp10-dec
-		os=-tops10
-		;;
-	decsystem20* | dec20*)
-		basic_machine=pdp10-dec
-		os=-tops20
-		;;
-	delta | 3300 | motorola-3300 | motorola-delta \
-	      | 3300-motorola | delta-motorola)
-		basic_machine=m68k-motorola
-		;;
-	delta88)
-		basic_machine=m88k-motorola
-		os=-sysv3
-		;;
-	djgpp)
-		basic_machine=i586-pc
-		os=-msdosdjgpp
-		;;
-	dpx20 | dpx20-*)
-		basic_machine=rs6000-bull
-		os=-bosx
-		;;
-	dpx2* | dpx2*-bull)
-		basic_machine=m68k-bull
-		os=-sysv3
-		;;
-	ebmon29k)
-		basic_machine=a29k-amd
-		os=-ebmon
-		;;
-	elxsi)
-		basic_machine=elxsi-elxsi
-		os=-bsd
-		;;
-	encore | umax | mmax)
-		basic_machine=ns32k-encore
-		;;
-	es1800 | OSE68k | ose68k | ose | OSE)
-		basic_machine=m68k-ericsson
-		os=-ose
-		;;
-	fx2800)
-		basic_machine=i860-alliant
-		;;
-	genix)
-		basic_machine=ns32k-ns
-		;;
-	gmicro)
-		basic_machine=tron-gmicro
-		os=-sysv
-		;;
-	go32)
-		basic_machine=i386-pc
-		os=-go32
-		;;
-	h3050r* | hiux*)
-		basic_machine=hppa1.1-hitachi
-		os=-hiuxwe2
-		;;
-	h8300hms)
-		basic_machine=h8300-hitachi
-		os=-hms
-		;;
-	h8300xray)
-		basic_machine=h8300-hitachi
-		os=-xray
-		;;
-	h8500hms)
-		basic_machine=h8500-hitachi
-		os=-hms
-		;;
-	harris)
-		basic_machine=m88k-harris
-		os=-sysv3
-		;;
-	hp300-*)
-		basic_machine=m68k-hp
-		;;
-	hp300bsd)
-		basic_machine=m68k-hp
-		os=-bsd
-		;;
-	hp300hpux)
-		basic_machine=m68k-hp
-		os=-hpux
-		;;
-	hp3k9[0-9][0-9] | hp9[0-9][0-9])
-		basic_machine=hppa1.0-hp
-		;;
-	hp9k2[0-9][0-9] | hp9k31[0-9])
-		basic_machine=m68000-hp
-		;;
-	hp9k3[2-9][0-9])
-		basic_machine=m68k-hp
-		;;
-	hp9k6[0-9][0-9] | hp6[0-9][0-9])
-		basic_machine=hppa1.0-hp
-		;;
-	hp9k7[0-79][0-9] | hp7[0-79][0-9])
-		basic_machine=hppa1.1-hp
-		;;
-	hp9k78[0-9] | hp78[0-9])
-		# FIXME: really hppa2.0-hp
-		basic_machine=hppa1.1-hp
-		;;
-	hp9k8[67]1 | hp8[67]1 | hp9k80[24] | hp80[24] | hp9k8[78]9 | hp8[78]9 | hp9k893 | hp893)
-		# FIXME: really hppa2.0-hp
-		basic_machine=hppa1.1-hp
-		;;
-	hp9k8[0-9][13679] | hp8[0-9][13679])
-		basic_machine=hppa1.1-hp
-		;;
-	hp9k8[0-9][0-9] | hp8[0-9][0-9])
-		basic_machine=hppa1.0-hp
-		;;
-	hppa-next)
-		os=-nextstep3
-		;;
-	hppaosf)
-		basic_machine=hppa1.1-hp
-		os=-osf
-		;;
-	hppro)
-		basic_machine=hppa1.1-hp
-		os=-proelf
-		;;
-	i370-ibm* | ibm*)
-		basic_machine=i370-ibm
-		;;
-# I'm not sure what "Sysv32" means.  Should this be sysv3.2?
-	i*86v32)
-		basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
-		os=-sysv32
-		;;
-	i*86v4*)
-		basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
-		os=-sysv4
-		;;
-	i*86v)
-		basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
-		os=-sysv
-		;;
-	i*86sol2)
-		basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
-		os=-solaris2
-		;;
-	i386mach)
-		basic_machine=i386-mach
-		os=-mach
-		;;
-	i386-vsta | vsta)
-		basic_machine=i386-unknown
-		os=-vsta
-		;;
-	iris | iris4d)
-		basic_machine=mips-sgi
-		case $os in
-		    -irix*)
-			;;
-		    *)
-			os=-irix4
-			;;
-		esac
-		;;
-	isi68 | isi)
-		basic_machine=m68k-isi
-		os=-sysv
-		;;
-	m88k-omron*)
-		basic_machine=m88k-omron
-		;;
-	magnum | m3230)
-		basic_machine=mips-mips
-		os=-sysv
-		;;
-	merlin)
-		basic_machine=ns32k-utek
-		os=-sysv
-		;;
-	mingw32)
-		basic_machine=i386-pc
-		os=-mingw32
-		;;
-	miniframe)
-		basic_machine=m68000-convergent
-		;;
-	*mint | -mint[0-9]* | *MiNT | *MiNT[0-9]*)
-		basic_machine=m68k-atari
-		os=-mint
-		;;
-	mips3*-*)
-		basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`
-		;;
-	mips3*)
-		basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`-unknown
-		;;
-	monitor)
-		basic_machine=m68k-rom68k
-		os=-coff
-		;;
-	morphos)
-		basic_machine=powerpc-unknown
-		os=-morphos
-		;;
-	msdos)
-		basic_machine=i386-pc
-		os=-msdos
-		;;
-	ms1-*)
-		basic_machine=`echo $basic_machine | sed -e 's/ms1-/mt-/'`
-		;;
-	mvs)
-		basic_machine=i370-ibm
-		os=-mvs
-		;;
-	ncr3000)
-		basic_machine=i486-ncr
-		os=-sysv4
-		;;
-	netbsd386)
-		basic_machine=i386-unknown
-		os=-netbsd
-		;;
-	netwinder)
-		basic_machine=armv4l-rebel
-		os=-linux
-		;;
-	news | news700 | news800 | news900)
-		basic_machine=m68k-sony
-		os=-newsos
-		;;
-	news1000)
-		basic_machine=m68030-sony
-		os=-newsos
-		;;
-	news-3600 | risc-news)
-		basic_machine=mips-sony
-		os=-newsos
-		;;
-	necv70)
-		basic_machine=v70-nec
-		os=-sysv
-		;;
-	next | m*-next )
-		basic_machine=m68k-next
-		case $os in
-		    -nextstep* )
-			;;
-		    -ns2*)
-		      os=-nextstep2
-			;;
-		    *)
-		      os=-nextstep3
-			;;
-		esac
-		;;
-	nh3000)
-		basic_machine=m68k-harris
-		os=-cxux
-		;;
-	nh[45]000)
-		basic_machine=m88k-harris
-		os=-cxux
-		;;
-	nindy960)
-		basic_machine=i960-intel
-		os=-nindy
-		;;
-	mon960)
-		basic_machine=i960-intel
-		os=-mon960
-		;;
-	nonstopux)
-		basic_machine=mips-compaq
-		os=-nonstopux
-		;;
-	np1)
-		basic_machine=np1-gould
-		;;
-	nsr-tandem)
-		basic_machine=nsr-tandem
-		;;
-	op50n-* | op60c-*)
-		basic_machine=hppa1.1-oki
-		os=-proelf
-		;;
-	openrisc | openrisc-*)
-		basic_machine=or32-unknown
-		;;
-	os400)
-		basic_machine=powerpc-ibm
-		os=-os400
-		;;
-	OSE68000 | ose68000)
-		basic_machine=m68000-ericsson
-		os=-ose
-		;;
-	os68k)
-		basic_machine=m68k-none
-		os=-os68k
-		;;
-	pa-hitachi)
-		basic_machine=hppa1.1-hitachi
-		os=-hiuxwe2
-		;;
-	paragon)
-		basic_machine=i860-intel
-		os=-osf
-		;;
-	pbd)
-		basic_machine=sparc-tti
-		;;
-	pbb)
-		basic_machine=m68k-tti
-		;;
-	pc532 | pc532-*)
-		basic_machine=ns32k-pc532
-		;;
-	pc98)
-		basic_machine=i386-pc
-		;;
-	pc98-*)
-		basic_machine=i386-`echo $basic_machine | sed 's/^[^-]*-//'`
-		;;
-	pentium | p5 | k5 | k6 | nexgen | viac3)
-		basic_machine=i586-pc
-		;;
-	pentiumpro | p6 | 6x86 | athlon | athlon_*)
-		basic_machine=i686-pc
-		;;
-	pentiumii | pentium2 | pentiumiii | pentium3)
-		basic_machine=i686-pc
-		;;
-	pentium4)
-		basic_machine=i786-pc
-		;;
-	pentium-* | p5-* | k5-* | k6-* | nexgen-* | viac3-*)
-		basic_machine=i586-`echo $basic_machine | sed 's/^[^-]*-//'`
-		;;
-	pentiumpro-* | p6-* | 6x86-* | athlon-*)
-		basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'`
-		;;
-	pentiumii-* | pentium2-* | pentiumiii-* | pentium3-*)
-		basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'`
-		;;
-	pentium4-*)
-		basic_machine=i786-`echo $basic_machine | sed 's/^[^-]*-//'`
-		;;
-	pn)
-		basic_machine=pn-gould
-		;;
-	power)	basic_machine=power-ibm
-		;;
-	ppc)	basic_machine=powerpc-unknown
-		;;
-	ppc-*)	basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'`
-		;;
-	ppcle | powerpclittle | ppc-le | powerpc-little)
-		basic_machine=powerpcle-unknown
-		;;
-	ppcle-* | powerpclittle-*)
-		basic_machine=powerpcle-`echo $basic_machine | sed 's/^[^-]*-//'`
-		;;
-	ppc64)	basic_machine=powerpc64-unknown
-		;;
-	ppc64-*) basic_machine=powerpc64-`echo $basic_machine | sed 's/^[^-]*-//'`
-		;;
-	ppc64le | powerpc64little | ppc64-le | powerpc64-little)
-		basic_machine=powerpc64le-unknown
-		;;
-	ppc64le-* | powerpc64little-*)
-		basic_machine=powerpc64le-`echo $basic_machine | sed 's/^[^-]*-//'`
-		;;
-	ps2)
-		basic_machine=i386-ibm
-		;;
-	pw32)
-		basic_machine=i586-unknown
-		os=-pw32
-		;;
-	rdos)
-		basic_machine=i386-pc
-		os=-rdos
-		;;
-	rom68k)
-		basic_machine=m68k-rom68k
-		os=-coff
-		;;
-	rm[46]00)
-		basic_machine=mips-siemens
-		;;
-	rtpc | rtpc-*)
-		basic_machine=romp-ibm
-		;;
-	s390 | s390-*)
-		basic_machine=s390-ibm
-		;;
-	s390x | s390x-*)
-		basic_machine=s390x-ibm
-		;;
-	sa29200)
-		basic_machine=a29k-amd
-		os=-udi
-		;;
-	sb1)
-		basic_machine=mipsisa64sb1-unknown
-		;;
-	sb1el)
-		basic_machine=mipsisa64sb1el-unknown
-		;;
-	sde)
-		basic_machine=mipsisa32-sde
-		os=-elf
-		;;
-	sei)
-		basic_machine=mips-sei
-		os=-seiux
-		;;
-	sequent)
-		basic_machine=i386-sequent
-		;;
-	sh)
-		basic_machine=sh-hitachi
-		os=-hms
-		;;
-	sh5el)
-		basic_machine=sh5le-unknown
-		;;
-	sh64)
-		basic_machine=sh64-unknown
-		;;
-	sparclite-wrs | simso-wrs)
-		basic_machine=sparclite-wrs
-		os=-vxworks
-		;;
-	sps7)
-		basic_machine=m68k-bull
-		os=-sysv2
-		;;
-	spur)
-		basic_machine=spur-unknown
-		;;
-	st2000)
-		basic_machine=m68k-tandem
-		;;
-	stratus)
-		basic_machine=i860-stratus
-		os=-sysv4
-		;;
-	sun2)
-		basic_machine=m68000-sun
-		;;
-	sun2os3)
-		basic_machine=m68000-sun
-		os=-sunos3
-		;;
-	sun2os4)
-		basic_machine=m68000-sun
-		os=-sunos4
-		;;
-	sun3os3)
-		basic_machine=m68k-sun
-		os=-sunos3
-		;;
-	sun3os4)
-		basic_machine=m68k-sun
-		os=-sunos4
-		;;
-	sun4os3)
-		basic_machine=sparc-sun
-		os=-sunos3
-		;;
-	sun4os4)
-		basic_machine=sparc-sun
-		os=-sunos4
-		;;
-	sun4sol2)
-		basic_machine=sparc-sun
-		os=-solaris2
-		;;
-	sun3 | sun3-*)
-		basic_machine=m68k-sun
-		;;
-	sun4)
-		basic_machine=sparc-sun
-		;;
-	sun386 | sun386i | roadrunner)
-		basic_machine=i386-sun
-		;;
-	sv1)
-		basic_machine=sv1-cray
-		os=-unicos
-		;;
-	symmetry)
-		basic_machine=i386-sequent
-		os=-dynix
-		;;
-	t3e)
-		basic_machine=alphaev5-cray
-		os=-unicos
-		;;
-	t90)
-		basic_machine=t90-cray
-		os=-unicos
-		;;
-	tic54x | c54x*)
-		basic_machine=tic54x-unknown
-		os=-coff
-		;;
-	tic55x | c55x*)
-		basic_machine=tic55x-unknown
-		os=-coff
-		;;
-	tic6x | c6x*)
-		basic_machine=tic6x-unknown
-		os=-coff
-		;;
-	tx39)
-		basic_machine=mipstx39-unknown
-		;;
-	tx39el)
-		basic_machine=mipstx39el-unknown
-		;;
-	toad1)
-		basic_machine=pdp10-xkl
-		os=-tops20
-		;;
-	tower | tower-32)
-		basic_machine=m68k-ncr
-		;;
-	tpf)
-		basic_machine=s390x-ibm
-		os=-tpf
-		;;
-	udi29k)
-		basic_machine=a29k-amd
-		os=-udi
-		;;
-	ultra3)
-		basic_machine=a29k-nyu
-		os=-sym1
-		;;
-	v810 | necv810)
-		basic_machine=v810-nec
-		os=-none
-		;;
-	vaxv)
-		basic_machine=vax-dec
-		os=-sysv
-		;;
-	vms)
-		basic_machine=vax-dec
-		os=-vms
-		;;
-	vpp*|vx|vx-*)
-		basic_machine=f301-fujitsu
-		;;
-	vxworks960)
-		basic_machine=i960-wrs
-		os=-vxworks
-		;;
-	vxworks68)
-		basic_machine=m68k-wrs
-		os=-vxworks
-		;;
-	vxworks29k)
-		basic_machine=a29k-wrs
-		os=-vxworks
-		;;
-	w65*)
-		basic_machine=w65-wdc
-		os=-none
-		;;
-	w89k-*)
-		basic_machine=hppa1.1-winbond
-		os=-proelf
-		;;
-	xbox)
-		basic_machine=i686-pc
-		os=-mingw32
-		;;
-	xps | xps100)
-		basic_machine=xps100-honeywell
-		;;
-	ymp)
-		basic_machine=ymp-cray
-		os=-unicos
-		;;
-	z8k-*-coff)
-		basic_machine=z8k-unknown
-		os=-sim
-		;;
-	none)
-		basic_machine=none-none
-		os=-none
-		;;
-
-# Here we handle the default manufacturer of certain CPU types.  It is in
-# some cases the only manufacturer, in others, it is the most popular.
-	w89k)
-		basic_machine=hppa1.1-winbond
-		;;
-	op50n)
-		basic_machine=hppa1.1-oki
-		;;
-	op60c)
-		basic_machine=hppa1.1-oki
-		;;
-	romp)
-		basic_machine=romp-ibm
-		;;
-	mmix)
-		basic_machine=mmix-knuth
-		;;
-	rs6000)
-		basic_machine=rs6000-ibm
-		;;
-	vax)
-		basic_machine=vax-dec
-		;;
-	pdp10)
-		# there are many clones, so DEC is not a safe bet
-		basic_machine=pdp10-unknown
-		;;
-	pdp11)
-		basic_machine=pdp11-dec
-		;;
-	we32k)
-		basic_machine=we32k-att
-		;;
-	sh[1234] | sh[24]a | sh[34]eb | sh[1234]le | sh[23]ele)
-		basic_machine=sh-unknown
-		;;
-	sparc | sparcv8 | sparcv9 | sparcv9b | sparcv9v)
-		basic_machine=sparc-sun
-		;;
-	cydra)
-		basic_machine=cydra-cydrome
-		;;
-	orion)
-		basic_machine=orion-highlevel
-		;;
-	orion105)
-		basic_machine=clipper-highlevel
-		;;
-	mac | mpw | mac-mpw)
-		basic_machine=m68k-apple
-		;;
-	pmac | pmac-mpw)
-		basic_machine=powerpc-apple
-		;;
-	*-unknown)
-		# Make sure to match an already-canonicalized machine name.
-		;;
-	*)
-		echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2
-		exit 1
-		;;
-esac
-
-# Here we canonicalize certain aliases for manufacturers.
-case $basic_machine in
-	*-digital*)
-		basic_machine=`echo $basic_machine | sed 's/digital.*/dec/'`
-		;;
-	*-commodore*)
-		basic_machine=`echo $basic_machine | sed 's/commodore.*/cbm/'`
-		;;
-	*)
-		;;
-esac
-
-# Decode manufacturer-specific aliases for certain operating systems.
-
-if [ x"$os" != x"" ]
-then
-case $os in
-        # First match some system type aliases
-        # that might get confused with valid system types.
-	# -solaris* is a basic system type, with this one exception.
-	-solaris1 | -solaris1.*)
-		os=`echo $os | sed -e 's|solaris1|sunos4|'`
-		;;
-	-solaris)
-		os=-solaris2
-		;;
-	-svr4*)
-		os=-sysv4
-		;;
-	-unixware*)
-		os=-sysv4.2uw
-		;;
-	-gnu/linux*)
-		os=`echo $os | sed -e 's|gnu/linux|linux-gnu|'`
-		;;
-	# First accept the basic system types.
-	# The portable systems comes first.
-	# Each alternative MUST END IN A *, to match a version number.
-	# -sysv* is not here because it comes later, after sysvr4.
-	-gnu* | -bsd* | -mach* | -minix* | -genix* | -ultrix* | -irix* \
-	      | -*vms* | -sco* | -esix* | -isc* | -aix* | -sunos | -sunos[34]*\
-	      | -hpux* | -unos* | -osf* | -luna* | -dgux* | -solaris* | -sym* \
-	      | -amigaos* | -amigados* | -msdos* | -newsos* | -unicos* | -aof* \
-	      | -aos* \
-	      | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \
-	      | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \
-	      | -hiux* | -386bsd* | -knetbsd* | -mirbsd* | -netbsd* \
-	      | -openbsd* | -solidbsd* \
-	      | -ekkobsd* | -kfreebsd* | -freebsd* | -riscix* | -lynxos* \
-	      | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \
-	      | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \
-	      | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \
-	      | -chorusos* | -chorusrdb* \
-	      | -cygwin* | -pe* | -psos* | -moss* | -proelf* | -rtems* \
-	      | -mingw32* | -linux-gnu* | -linux-newlib* | -linux-uclibc* \
-	      | -uxpv* | -beos* | -mpeix* | -udk* \
-	      | -interix* | -uwin* | -mks* | -rhapsody* | -darwin* | -opened* \
-	      | -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \
-	      | -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \
-	      | -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \
-	      | -morphos* | -superux* | -rtmk* | -rtmk-nova* | -windiss* \
-	      | -powermax* | -dnix* | -nx6 | -nx7 | -sei* | -dragonfly* \
-	      | -skyos* | -haiku* | -rdos* | -toppers* | -drops*)
-	# Remember, each alternative MUST END IN *, to match a version number.
-		;;
-	-qnx*)
-		case $basic_machine in
-		    x86-* | i*86-*)
-			;;
-		    *)
-			os=-nto$os
-			;;
-		esac
-		;;
-	-nto-qnx*)
-		;;
-	-nto*)
-		os=`echo $os | sed -e 's|nto|nto-qnx|'`
-		;;
-	-sim | -es1800* | -hms* | -xray | -os68k* | -none* | -v88r* \
-	      | -windows* | -osx | -abug | -netware* | -os9* | -beos* | -haiku* \
-	      | -macos* | -mpw* | -magic* | -mmixware* | -mon960* | -lnews*)
-		;;
-	-mac*)
-		os=`echo $os | sed -e 's|mac|macos|'`
-		;;
-	-linux-dietlibc)
-		os=-linux-dietlibc
-		;;
-	-linux*)
-		os=`echo $os | sed -e 's|linux|linux-gnu|'`
-		;;
-	-sunos5*)
-		os=`echo $os | sed -e 's|sunos5|solaris2|'`
-		;;
-	-sunos6*)
-		os=`echo $os | sed -e 's|sunos6|solaris3|'`
-		;;
-	-opened*)
-		os=-openedition
-		;;
-        -os400*)
-		os=-os400
-		;;
-	-wince*)
-		os=-wince
-		;;
-	-osfrose*)
-		os=-osfrose
-		;;
-	-osf*)
-		os=-osf
-		;;
-	-utek*)
-		os=-bsd
-		;;
-	-dynix*)
-		os=-bsd
-		;;
-	-acis*)
-		os=-aos
-		;;
-	-atheos*)
-		os=-atheos
-		;;
-	-syllable*)
-		os=-syllable
-		;;
-	-386bsd)
-		os=-bsd
-		;;
-	-ctix* | -uts*)
-		os=-sysv
-		;;
-	-nova*)
-		os=-rtmk-nova
-		;;
-	-ns2 )
-		os=-nextstep2
-		;;
-	-nsk*)
-		os=-nsk
-		;;
-	# Preserve the version number of sinix5.
-	-sinix5.*)
-		os=`echo $os | sed -e 's|sinix|sysv|'`
-		;;
-	-sinix*)
-		os=-sysv4
-		;;
-        -tpf*)
-		os=-tpf
-		;;
-	-triton*)
-		os=-sysv3
-		;;
-	-oss*)
-		os=-sysv3
-		;;
-	-svr4)
-		os=-sysv4
-		;;
-	-svr3)
-		os=-sysv3
-		;;
-	-sysvr4)
-		os=-sysv4
-		;;
-	# This must come after -sysvr4.
-	-sysv*)
-		;;
-	-ose*)
-		os=-ose
-		;;
-	-es1800*)
-		os=-ose
-		;;
-	-xenix)
-		os=-xenix
-		;;
-	-*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*)
-		os=-mint
-		;;
-	-aros*)
-		os=-aros
-		;;
-	-kaos*)
-		os=-kaos
-		;;
-	-zvmoe)
-		os=-zvmoe
-		;;
-	-none)
-		;;
-	*)
-		# Get rid of the `-' at the beginning of $os.
-		os=`echo $os | sed 's/[^-]*-//'`
-		echo Invalid configuration \`$1\': system \`$os\' not recognized 1>&2
-		exit 1
-		;;
-esac
-else
-
-# Here we handle the default operating systems that come with various machines.
-# The value should be what the vendor currently ships out the door with their
-# machine or put another way, the most popular os provided with the machine.
-
-# Note that if you're going to try to match "-MANUFACTURER" here (say,
-# "-sun"), then you have to tell the case statement up towards the top
-# that MANUFACTURER isn't an operating system.  Otherwise, code above
-# will signal an error saying that MANUFACTURER isn't an operating
-# system, and we'll never get to this point.
-
-case $basic_machine in
-        score-*)
-		os=-elf
-		;;
-        spu-*)
-		os=-elf
-		;;
-	*-acorn)
-		os=-riscix1.2
-		;;
-	arm*-rebel)
-		os=-linux
-		;;
-	arm*-semi)
-		os=-aout
-		;;
-        c4x-* | tic4x-*)
-        	os=-coff
-		;;
-	# This must come before the *-dec entry.
-	pdp10-*)
-		os=-tops20
-		;;
-	pdp11-*)
-		os=-none
-		;;
-	*-dec | vax-*)
-		os=-ultrix4.2
-		;;
-	m68*-apollo)
-		os=-domain
-		;;
-	i386-sun)
-		os=-sunos4.0.2
-		;;
-	m68000-sun)
-		os=-sunos3
-		# This also exists in the configure program, but was not the
-		# default.
-		# os=-sunos4
-		;;
-	m68*-cisco)
-		os=-aout
-		;;
-        mep-*)
-		os=-elf
-		;;
-	mips*-cisco)
-		os=-elf
-		;;
-	mips*-*)
-		os=-elf
-		;;
-	or32-*)
-		os=-coff
-		;;
-	*-tti)	# must be before sparc entry or we get the wrong os.
-		os=-sysv3
-		;;
-	sparc-* | *-sun)
-		os=-sunos4.1.1
-		;;
-	*-be)
-		os=-beos
-		;;
-	*-haiku)
-		os=-haiku
-		;;
-	*-ibm)
-		os=-aix
-		;;
-    	*-knuth)
-		os=-mmixware
-		;;
-	*-wec)
-		os=-proelf
-		;;
-	*-winbond)
-		os=-proelf
-		;;
-	*-oki)
-		os=-proelf
-		;;
-	*-hp)
-		os=-hpux
-		;;
-	*-hitachi)
-		os=-hiux
-		;;
-	i860-* | *-att | *-ncr | *-altos | *-motorola | *-convergent)
-		os=-sysv
-		;;
-	*-cbm)
-		os=-amigaos
-		;;
-	*-dg)
-		os=-dgux
-		;;
-	*-dolphin)
-		os=-sysv3
-		;;
-	m68k-ccur)
-		os=-rtu
-		;;
-	m88k-omron*)
-		os=-luna
-		;;
-	*-next )
-		os=-nextstep
-		;;
-	*-sequent)
-		os=-ptx
-		;;
-	*-crds)
-		os=-unos
-		;;
-	*-ns)
-		os=-genix
-		;;
-	i370-*)
-		os=-mvs
-		;;
-	*-next)
-		os=-nextstep3
-		;;
-	*-gould)
-		os=-sysv
-		;;
-	*-highlevel)
-		os=-bsd
-		;;
-	*-encore)
-		os=-bsd
-		;;
-	*-sgi)
-		os=-irix
-		;;
-	*-siemens)
-		os=-sysv4
-		;;
-	*-masscomp)
-		os=-rtu
-		;;
-	f30[01]-fujitsu | f700-fujitsu)
-		os=-uxpv
-		;;
-	*-rom68k)
-		os=-coff
-		;;
-	*-*bug)
-		os=-coff
-		;;
-	*-apple)
-		os=-macos
-		;;
-	*-atari*)
-		os=-mint
-		;;
-	*)
-		os=-none
-		;;
-esac
-fi
-
-# Here we handle the case where we know the os, and the CPU type, but not the
-# manufacturer.  We pick the logical manufacturer.
-vendor=unknown
-case $basic_machine in
-	*-unknown)
-		case $os in
-			-riscix*)
-				vendor=acorn
-				;;
-			-sunos*)
-				vendor=sun
-				;;
-			-aix*)
-				vendor=ibm
-				;;
-			-beos*)
-				vendor=be
-				;;
-			-hpux*)
-				vendor=hp
-				;;
-			-mpeix*)
-				vendor=hp
-				;;
-			-hiux*)
-				vendor=hitachi
-				;;
-			-unos*)
-				vendor=crds
-				;;
-			-dgux*)
-				vendor=dg
-				;;
-			-luna*)
-				vendor=omron
-				;;
-			-genix*)
-				vendor=ns
-				;;
-			-mvs* | -opened*)
-				vendor=ibm
-				;;
-			-os400*)
-				vendor=ibm
-				;;
-			-ptx*)
-				vendor=sequent
-				;;
-			-tpf*)
-				vendor=ibm
-				;;
-			-vxsim* | -vxworks* | -windiss*)
-				vendor=wrs
-				;;
-			-aux*)
-				vendor=apple
-				;;
-			-hms*)
-				vendor=hitachi
-				;;
-			-mpw* | -macos*)
-				vendor=apple
-				;;
-			-*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*)
-				vendor=atari
-				;;
-			-vos*)
-				vendor=stratus
-				;;
-		esac
-		basic_machine=`echo $basic_machine | sed "s/unknown/$vendor/"`
-		;;
-esac
-
-echo $basic_machine$os
-exit
-
-# Local variables:
-# eval: (add-hook 'write-file-hooks 'time-stamp)
-# time-stamp-start: "timestamp='"
-# time-stamp-format: "%:y-%02m-%02d"
-# time-stamp-end: "'"
-# End:
diff -Nru /tmp/bxdedfLB6u/uriparser-0.6.0/configure /tmp/fLjZ2dz9P3/uriparser-0.7.4/configure
--- uriparser-0.6.0/configure	2007-09-19 04:12:47.000000000 +0100
+++ uriparser-0.7.4/configure	2008-12-23 02:31:17.000000000 +0000
@@ -1,6 +1,6 @@
 #! /bin/sh
 # Guess values for system-dependent variables and create Makefiles.
-# Generated by GNU Autoconf 2.61 for uriparser 0.6.0.
+# Generated by GNU Autoconf 2.61 for uriparser 0.7.4.
 #
 # Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
 # 2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
@@ -726,8 +726,8 @@
 # Identity of this package.
 PACKAGE_NAME='uriparser'
 PACKAGE_TARNAME='uriparser'
-PACKAGE_VERSION='0.6.0'
-PACKAGE_STRING='uriparser 0.6.0'
+PACKAGE_VERSION='0.7.4'
+PACKAGE_STRING='uriparser 0.7.4'
 PACKAGE_BUGREPORT=''
 
 # Factoring default headers for most tests.
@@ -862,12 +862,17 @@
 ECHO
 AR
 RANLIB
+DSYMUTIL
+NMEDIT
 CPP
 CXXCPP
 F77
 FFLAGS
 ac_ct_F77
 LIBTOOL
+subdirs
+URI_GENERATE_DOC_TRUE
+URI_GENERATE_DOC_FALSE
 LIBOBJS
 LTLIBOBJS'
 ac_subst_files=''
@@ -886,7 +891,7 @@
 CXXCPP
 F77
 FFLAGS'
-
+ac_subdirs_all='doc'
 
 # Initialize some variables set by options.
 ac_init_help=
@@ -1388,7 +1393,7 @@
   # Omit some internal or obsolete options to make the list less imposing.
   # This message is too long to be a string in the A/UX 3.1 sh.
   cat <<_ACEOF
-\`configure' configures uriparser 0.6.0 to adapt to many kinds of systems.
+\`configure' configures uriparser 0.7.4 to adapt to many kinds of systems.
 
 Usage: $0 [OPTION]... [VAR=VALUE]...
 
@@ -1458,7 +1463,7 @@
 
 if test -n "$ac_init_help"; then
   case $ac_init_help in
-     short | recursive ) echo "Configuration of uriparser 0.6.0:";;
+     short | recursive ) echo "Configuration of uriparser 0.7.4:";;
    esac
   cat <<\_ACEOF
 
@@ -1476,6 +1481,8 @@
 Extra options:
   --enable-sizedown       save space whereever possible (resulting in slower code)
 
+  --enable-doc            generate API documentation with Doxygen (off by default)
+
 Optional Packages:
   --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
   --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
@@ -1562,7 +1569,7 @@
 test -n "$ac_init_help" && exit $ac_status
 if $ac_init_version; then
   cat <<\_ACEOF
-uriparser configure 0.6.0
+uriparser configure 0.7.4
 generated by GNU Autoconf 2.61
 
 Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
@@ -1576,7 +1583,7 @@
 This file contains any messages produced by compilers while
 running configure, to aid debugging if configure makes a mistake.
 
-It was created by uriparser $as_me 0.6.0, which was
+It was created by uriparser $as_me 0.7.4, which was
 generated by GNU Autoconf 2.61.  Invocation command line was
 
   $ $0 $@
@@ -1929,10 +1936,8 @@
 ac_compiler_gnu=$ac_cv_c_compiler_gnu
 
 
-am__api_version='1.10'
-
 ac_aux_dir=
-for ac_dir in "$srcdir" "$srcdir/.." "$srcdir/../.."; do
+for ac_dir in build-aux "$srcdir"/build-aux; do
   if test -f "$ac_dir/install-sh"; then
     ac_aux_dir=$ac_dir
     ac_install_sh="$ac_aux_dir/install-sh -c"
@@ -1948,8 +1953,8 @@
   fi
 done
 if test -z "$ac_aux_dir"; then
-  { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" >&5
-echo "$as_me: error: cannot find install-sh or install.sh in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" >&2;}
+  { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in build-aux \"$srcdir\"/build-aux" >&5
+echo "$as_me: error: cannot find install-sh or install.sh in build-aux \"$srcdir\"/build-aux" >&2;}
    { (exit 1); exit 1; }; }
 fi
 
@@ -1962,6 +1967,8 @@
 ac_configure="$SHELL $ac_aux_dir/configure"  # Please don't use this var.
 
 
+am__api_version='1.10'
+
 # Find a good install program.  We prefer a C program (faster),
 # so one script is as good as another.  But avoid the broken or
 # incompatible versions:
@@ -2266,7 +2273,7 @@
 
 # Define the identity of the package.
  PACKAGE='uriparser'
- VERSION='0.6.0'
+ VERSION='0.7.4'
 
 
 cat >>confdefs.h <<_ACEOF
@@ -4569,7 +4576,7 @@
 # whether `pass_all' will *always* work, you probably want this one.
 
 case $host_os in
-aix4* | aix5*)
+aix[4-9]*)
   lt_cv_deplibs_check_method=pass_all
   ;;
 
@@ -4644,7 +4651,7 @@
   esac
   ;;
 
-interix3*)
+interix[3-9]*)
   # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here
   lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|\.a)$'
   ;;
@@ -4785,7 +4792,7 @@
   ;;
 *-*-irix6*)
   # Find out which ABI we are using.
-  echo '#line 4788 "configure"' > conftest.$ac_ext
+  echo '#line 4795 "configure"' > conftest.$ac_ext
   if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
   (eval $ac_compile) 2>&5
   ac_status=$?
@@ -4957,7 +4964,11 @@
     *64-bit*)
       case $lt_cv_prog_gnu_ld in
       yes*) LD="${LD-ld} -m elf64_sparc" ;;
-      *)    LD="${LD-ld} -64" ;;
+      *)
+        if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then
+	  LD="${LD-ld} -64"
+	fi
+	;;
       esac
       ;;
     esac
@@ -6082,7 +6093,6 @@
 
 
 # Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers!
-
 # find the maximum length of command line arguments
 { echo "$as_me:$LINENO: checking the maximum length of command line arguments" >&5
 echo $ECHO_N "checking the maximum length of command line arguments... $ECHO_C" >&6; }
@@ -6169,24 +6179,27 @@
     fi
     ;;
   *)
-    # If test is not a shell built-in, we'll probably end up computing a
-    # maximum length that is only half of the actual maximum length, but
-    # we can't tell.
-    SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}}
-    while (test "X"`$SHELL $0 --fallback-echo "X$teststring" 2>/dev/null` \
+    lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null`
+    if test -n "$lt_cv_sys_max_cmd_len"; then
+      lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
+      lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
+    else
+      SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}}
+      while (test "X"`$SHELL $0 --fallback-echo "X$teststring" 2>/dev/null` \
 	       = "XX$teststring") >/dev/null 2>&1 &&
-	    new_result=`expr "X$teststring" : ".*" 2>&1` &&
-	    lt_cv_sys_max_cmd_len=$new_result &&
-	    test $i != 17 # 1/2 MB should be enough
-    do
-      i=`expr $i + 1`
-      teststring=$teststring$teststring
-    done
-    teststring=
-    # Add a significant safety factor because C++ compilers can tack on massive
-    # amounts of additional arguments before passing them to the linker.
-    # It appears as though 1/2 is a usable value.
-    lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2`
+	      new_result=`expr "X$teststring" : ".*" 2>&1` &&
+	      lt_cv_sys_max_cmd_len=$new_result &&
+	      test $i != 17 # 1/2 MB should be enough
+      do
+        i=`expr $i + 1`
+        teststring=$teststring$teststring
+      done
+      teststring=
+      # Add a significant safety factor because C++ compilers can tack on massive
+      # amounts of additional arguments before passing them to the linker.
+      # It appears as though 1/2 is a usable value.
+      lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2`
+    fi
     ;;
   esac
 
@@ -6394,7 +6407,7 @@
     echo "$progname: failed program was:" >&5
     cat conftest.$ac_ext >&5
   fi
-  rm -f conftest* conftst*
+  rm -rf conftest* conftst*
 
   # Do not use the global_symbol_pipe unless it works.
   if test "$pipe_works" = yes; then
@@ -6792,7 +6805,7 @@
 test -z "$ac_objext" && ac_objext=o
 
 # Determine commands to create old-style static archives.
-old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs$old_deplibs'
+old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs'
 old_postinstall_cmds='chmod 644 $oldlib'
 old_postuninstall_cmds=
 
@@ -6954,6 +6967,318 @@
   ;;
 esac
 
+
+  case $host_os in
+    rhapsody* | darwin*)
+    if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}dsymutil", so it can be a program name with args.
+set dummy ${ac_tool_prefix}dsymutil; ac_word=$2
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
+if test "${ac_cv_prog_DSYMUTIL+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  if test -n "$DSYMUTIL"; then
+  ac_cv_prog_DSYMUTIL="$DSYMUTIL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_DSYMUTIL="${ac_tool_prefix}dsymutil"
+    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+done
+IFS=$as_save_IFS
+
+fi
+fi
+DSYMUTIL=$ac_cv_prog_DSYMUTIL
+if test -n "$DSYMUTIL"; then
+  { echo "$as_me:$LINENO: result: $DSYMUTIL" >&5
+echo "${ECHO_T}$DSYMUTIL" >&6; }
+else
+  { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_DSYMUTIL"; then
+  ac_ct_DSYMUTIL=$DSYMUTIL
+  # Extract the first word of "dsymutil", so it can be a program name with args.
+set dummy dsymutil; ac_word=$2
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
+if test "${ac_cv_prog_ac_ct_DSYMUTIL+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  if test -n "$ac_ct_DSYMUTIL"; then
+  ac_cv_prog_ac_ct_DSYMUTIL="$ac_ct_DSYMUTIL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_DSYMUTIL="dsymutil"
+    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_DSYMUTIL=$ac_cv_prog_ac_ct_DSYMUTIL
+if test -n "$ac_ct_DSYMUTIL"; then
+  { echo "$as_me:$LINENO: result: $ac_ct_DSYMUTIL" >&5
+echo "${ECHO_T}$ac_ct_DSYMUTIL" >&6; }
+else
+  { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
+fi
+
+  if test "x$ac_ct_DSYMUTIL" = x; then
+    DSYMUTIL=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
+whose name does not start with the host triplet.  If you think this
+configuration is useful to you, please write to autoconf@gnu.org." >&5
+echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
+whose name does not start with the host triplet.  If you think this
+configuration is useful to you, please write to autoconf@gnu.org." >&2;}
+ac_tool_warned=yes ;;
+esac
+    DSYMUTIL=$ac_ct_DSYMUTIL
+  fi
+else
+  DSYMUTIL="$ac_cv_prog_DSYMUTIL"
+fi
+
+    if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "${ac_tool_prefix}nmedit", so it can be a program name with args.
+set dummy ${ac_tool_prefix}nmedit; ac_word=$2
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
+if test "${ac_cv_prog_NMEDIT+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  if test -n "$NMEDIT"; then
+  ac_cv_prog_NMEDIT="$NMEDIT" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_NMEDIT="${ac_tool_prefix}nmedit"
+    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+done
+IFS=$as_save_IFS
+
+fi
+fi
+NMEDIT=$ac_cv_prog_NMEDIT
+if test -n "$NMEDIT"; then
+  { echo "$as_me:$LINENO: result: $NMEDIT" >&5
+echo "${ECHO_T}$NMEDIT" >&6; }
+else
+  { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_NMEDIT"; then
+  ac_ct_NMEDIT=$NMEDIT
+  # Extract the first word of "nmedit", so it can be a program name with args.
+set dummy nmedit; ac_word=$2
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
+if test "${ac_cv_prog_ac_ct_NMEDIT+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  if test -n "$ac_ct_NMEDIT"; then
+  ac_cv_prog_ac_ct_NMEDIT="$ac_ct_NMEDIT" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_exec_ext in '' $ac_executable_extensions; do
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+    ac_cv_prog_ac_ct_NMEDIT="nmedit"
+    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
+    break 2
+  fi
+done
+done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_NMEDIT=$ac_cv_prog_ac_ct_NMEDIT
+if test -n "$ac_ct_NMEDIT"; then
+  { echo "$as_me:$LINENO: result: $ac_ct_NMEDIT" >&5
+echo "${ECHO_T}$ac_ct_NMEDIT" >&6; }
+else
+  { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
+fi
+
+  if test "x$ac_ct_NMEDIT" = x; then
+    NMEDIT=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
+whose name does not start with the host triplet.  If you think this
+configuration is useful to you, please write to autoconf@gnu.org." >&5
+echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
+whose name does not start with the host triplet.  If you think this
+configuration is useful to you, please write to autoconf@gnu.org." >&2;}
+ac_tool_warned=yes ;;
+esac
+    NMEDIT=$ac_ct_NMEDIT
+  fi
+else
+  NMEDIT="$ac_cv_prog_NMEDIT"
+fi
+
+
+    { echo "$as_me:$LINENO: checking for -single_module linker flag" >&5
+echo $ECHO_N "checking for -single_module linker flag... $ECHO_C" >&6; }
+if test "${lt_cv_apple_cc_single_mod+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  lt_cv_apple_cc_single_mod=no
+      if test -z "${LT_MULTI_MODULE}"; then
+   # By default we will add the -single_module flag. You can override
+   # by either setting the environment variable LT_MULTI_MODULE
+   # non-empty at configure time, or by adding -multi_module to the
+   # link flags.
+   echo "int foo(void){return 1;}" > conftest.c
+   $LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
+     -dynamiclib ${wl}-single_module conftest.c
+   if test -f libconftest.dylib; then
+     lt_cv_apple_cc_single_mod=yes
+     rm -rf libconftest.dylib*
+   fi
+   rm conftest.c
+      fi
+fi
+{ echo "$as_me:$LINENO: result: $lt_cv_apple_cc_single_mod" >&5
+echo "${ECHO_T}$lt_cv_apple_cc_single_mod" >&6; }
+    { echo "$as_me:$LINENO: checking for -exported_symbols_list linker flag" >&5
+echo $ECHO_N "checking for -exported_symbols_list linker flag... $ECHO_C" >&6; }
+if test "${lt_cv_ld_exported_symbols_list+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  lt_cv_ld_exported_symbols_list=no
+      save_LDFLAGS=$LDFLAGS
+      echo "_main" > conftest.sym
+      LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym"
+      cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_link") 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest$ac_exeext &&
+       $as_test_x conftest$ac_exeext; then
+  lt_cv_ld_exported_symbols_list=yes
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+	lt_cv_ld_exported_symbols_list=no
+fi
+
+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
+      conftest$ac_exeext conftest.$ac_ext
+   LDFLAGS="$save_LDFLAGS"
+
+fi
+{ echo "$as_me:$LINENO: result: $lt_cv_ld_exported_symbols_list" >&5
+echo "${ECHO_T}$lt_cv_ld_exported_symbols_list" >&6; }
+    case $host_os in
+    rhapsody* | darwin1.[0123])
+      _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;;
+    darwin1.*)
+     _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
+    darwin*)
+      # if running on 10.5 or later, the deployment target defaults
+      # to the OS version, if on x86, and 10.4, the deployment
+      # target defaults to 10.4. Don't you love it?
+      case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in
+   10.0,*86*-darwin8*|10.0,*-darwin[91]*)
+     _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
+   10.[012]*)
+     _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
+   10.*)
+     _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
+      esac
+    ;;
+  esac
+    if test "$lt_cv_apple_cc_single_mod" = "yes"; then
+      _lt_dar_single_mod='$single_module'
+    fi
+    if test "$lt_cv_ld_exported_symbols_list" = "yes"; then
+      _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym'
+    else
+      _lt_dar_export_syms="~$NMEDIT -s \$output_objdir/\${libname}-symbols.expsym \${lib}"
+    fi
+    if test "$DSYMUTIL" != ":"; then
+      _lt_dsymutil="~$DSYMUTIL \$lib || :"
+    else
+      _lt_dsymutil=
+    fi
+    ;;
+  esac
+
+
 enable_dlopen=no
 enable_win32_dll=no
 
@@ -6974,6 +7299,67 @@
 
 test -z "$pic_mode" && pic_mode=default
 
+# Check if we have a version mismatch between libtool.m4 and ltmain.sh.
+#
+# Note:  This should be in AC_LIBTOOL_SETUP, _after_ $ltmain have been defined.
+#        We also should do it _before_ AC_LIBTOOL_LANG_C_CONFIG that actually
+#        calls AC_LIBTOOL_CONFIG and creates libtool.
+#
+{ echo "$as_me:$LINENO: checking for correct ltmain.sh version" >&5
+echo $ECHO_N "checking for correct ltmain.sh version... $ECHO_C" >&6; }
+if test "x$ltmain" = "x" ; then
+  { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
+  { { echo "$as_me:$LINENO: error:
+
+*** [Gentoo] sanity check failed! ***
+*** \$ltmain is not defined, please check the patch for consistency! ***
+" >&5
+echo "$as_me: error:
+
+*** [Gentoo] sanity check failed! ***
+*** \$ltmain is not defined, please check the patch for consistency! ***
+" >&2;}
+   { (exit 1); exit 1; }; }
+fi
+gentoo_lt_version="1.5.26"
+gentoo_ltmain_version=`sed -n '/^[ 	]*VERSION=/{s/^[ 	]*VERSION=//;p;q;}' "$ltmain"`
+if test "x$gentoo_lt_version" != "x$gentoo_ltmain_version" ; then
+  { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
+  { { echo "$as_me:$LINENO: error:
+
+*** [Gentoo] sanity check failed! ***
+*** libtool.m4 and ltmain.sh have a version mismatch! ***
+*** (libtool.m4 = $gentoo_lt_version, ltmain.sh = $gentoo_ltmain_version) ***
+
+Please run:
+
+  libtoolize --copy --force
+
+if appropriate, please contact the maintainer of this
+package (or your distribution) for help.
+" >&5
+echo "$as_me: error:
+
+*** [Gentoo] sanity check failed! ***
+*** libtool.m4 and ltmain.sh have a version mismatch! ***
+*** (libtool.m4 = $gentoo_lt_version, ltmain.sh = $gentoo_ltmain_version) ***
+
+Please run:
+
+  libtoolize --copy --force
+
+if appropriate, please contact the maintainer of this
+package (or your distribution) for help.
+" >&2;}
+   { (exit 1); exit 1; }; }
+else
+  { echo "$as_me:$LINENO: result: yes" >&5
+echo "${ECHO_T}yes" >&6; }
+fi
+
+
 # Use C for the default configuration in the libtool script
 tagname=
 lt_save_CC="$CC"
@@ -7019,7 +7405,7 @@
 echo "$lt_simple_link_test_code" >conftest.$ac_ext
 eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
 _lt_linker_boilerplate=`cat conftest.err`
-$rm conftest*
+$rm -r conftest*
 
 
 
@@ -7047,11 +7433,11 @@
    -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
    -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
    -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:7050: $lt_compile\"" >&5)
+   (eval echo "\"\$as_me:7436: $lt_compile\"" >&5)
    (eval "$lt_compile" 2>conftest.err)
    ac_status=$?
    cat conftest.err >&5
-   echo "$as_me:7054: \$? = $ac_status" >&5
+   echo "$as_me:7440: \$? = $ac_status" >&5
    if (exit $ac_status) && test -s "$ac_outfile"; then
      # The compiler can only warn and ignore the option if not recognized
      # So say no if there are warnings other than the usual output.
@@ -7120,7 +7506,7 @@
       lt_prog_compiler_pic='-fno-common'
       ;;
 
-    interix3*)
+    interix[3-9]*)
       # Interix 3.x gcc -fpic/-fPIC options generate broken code.
       # Instead, we relocate shared libraries at runtime.
       ;;
@@ -7321,10 +7707,10 @@
 
 { echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic works" >&5
 echo $ECHO_N "checking if $compiler PIC flag $lt_prog_compiler_pic works... $ECHO_C" >&6; }
-if test "${lt_prog_compiler_pic_works+set}" = set; then
+if test "${lt_cv_prog_compiler_pic_works+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
-  lt_prog_compiler_pic_works=no
+  lt_cv_prog_compiler_pic_works=no
   ac_outfile=conftest.$ac_objext
    echo "$lt_simple_compile_test_code" > conftest.$ac_ext
    lt_compiler_flag="$lt_prog_compiler_pic -DPIC"
@@ -7337,27 +7723,27 @@
    -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
    -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
    -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:7340: $lt_compile\"" >&5)
+   (eval echo "\"\$as_me:7726: $lt_compile\"" >&5)
    (eval "$lt_compile" 2>conftest.err)
    ac_status=$?
    cat conftest.err >&5
-   echo "$as_me:7344: \$? = $ac_status" >&5
+   echo "$as_me:7730: \$? = $ac_status" >&5
    if (exit $ac_status) && test -s "$ac_outfile"; then
      # The compiler can only warn and ignore the option if not recognized
      # So say no if there are warnings other than the usual output.
      $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
      $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
      if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
-       lt_prog_compiler_pic_works=yes
+       lt_cv_prog_compiler_pic_works=yes
      fi
    fi
    $rm conftest*
 
 fi
-{ echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_works" >&5
-echo "${ECHO_T}$lt_prog_compiler_pic_works" >&6; }
+{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_pic_works" >&5
+echo "${ECHO_T}$lt_cv_prog_compiler_pic_works" >&6; }
 
-if test x"$lt_prog_compiler_pic_works" = xyes; then
+if test x"$lt_cv_prog_compiler_pic_works" = xyes; then
     case $lt_prog_compiler_pic in
      "" | " "*) ;;
      *) lt_prog_compiler_pic=" $lt_prog_compiler_pic" ;;
@@ -7384,10 +7770,10 @@
 wl=$lt_prog_compiler_wl eval lt_tmp_static_flag=\"$lt_prog_compiler_static\"
 { echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5
 echo $ECHO_N "checking if $compiler static flag $lt_tmp_static_flag works... $ECHO_C" >&6; }
-if test "${lt_prog_compiler_static_works+set}" = set; then
+if test "${lt_cv_prog_compiler_static_works+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
-  lt_prog_compiler_static_works=no
+  lt_cv_prog_compiler_static_works=no
    save_LDFLAGS="$LDFLAGS"
    LDFLAGS="$LDFLAGS $lt_tmp_static_flag"
    echo "$lt_simple_link_test_code" > conftest.$ac_ext
@@ -7400,20 +7786,20 @@
        $echo "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp
        $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
        if diff conftest.exp conftest.er2 >/dev/null; then
-         lt_prog_compiler_static_works=yes
+         lt_cv_prog_compiler_static_works=yes
        fi
      else
-       lt_prog_compiler_static_works=yes
+       lt_cv_prog_compiler_static_works=yes
      fi
    fi
-   $rm conftest*
+   $rm -r conftest*
    LDFLAGS="$save_LDFLAGS"
 
 fi
-{ echo "$as_me:$LINENO: result: $lt_prog_compiler_static_works" >&5
-echo "${ECHO_T}$lt_prog_compiler_static_works" >&6; }
+{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_static_works" >&5
+echo "${ECHO_T}$lt_cv_prog_compiler_static_works" >&6; }
 
-if test x"$lt_prog_compiler_static_works" = xyes; then
+if test x"$lt_cv_prog_compiler_static_works" = xyes; then
     :
 else
     lt_prog_compiler_static=
@@ -7441,11 +7827,11 @@
    -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
    -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
    -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:7444: $lt_compile\"" >&5)
+   (eval echo "\"\$as_me:7830: $lt_compile\"" >&5)
    (eval "$lt_compile" 2>out/conftest.err)
    ac_status=$?
    cat out/conftest.err >&5
-   echo "$as_me:7448: \$? = $ac_status" >&5
+   echo "$as_me:7834: \$? = $ac_status" >&5
    if (exit $ac_status) && test -s out/conftest2.$ac_objext
    then
      # The compiler can only warn and ignore the option if not recognized
@@ -7525,12 +7911,13 @@
   # it will be wrapped by ` (' and `)$', so one must not match beginning or
   # end of line.  Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
   # as well as any symbol that contains `d'.
-  exclude_expsyms="_GLOBAL_OFFSET_TABLE_"
+  exclude_expsyms='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'
   # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
   # platforms (ab)use it in PIC code, but their linkers get confused if
   # the symbol is explicitly referenced.  Since portable code cannot
   # rely on this symbol name, it's probably fine to never include it in
   # preloaded symbol tables.
+  # Exclude shared library initialization/finalization symbols.
   extract_expsyms_cmds=
   # Just being paranoid about ensuring that cc_basename is set.
   for cc_temp in $compiler""; do
@@ -7589,7 +7976,7 @@
 
     # See if GNU ld supports shared libraries.
     case $host_os in
-    aix3* | aix4* | aix5*)
+    aix[3-9]*)
       # On AIX/PPC, the GNU linker is very broken
       if test "$host_cpu" != ia64; then
 	ld_shlibs=no
@@ -7655,7 +8042,7 @@
       fi
       ;;
 
-    interix3*)
+    interix[3-9]*)
       hardcode_direct=no
       hardcode_shlibpath_var=no
       hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
@@ -7808,7 +8195,7 @@
       fi
       ;;
 
-    aix4* | aix5*)
+    aix[4-9]*)
       if test "$host_cpu" = ia64; then
 	# On IA64, the linker does run time linking by default, so we don't
 	# have to do anything special.
@@ -7828,7 +8215,7 @@
 	# Test if we are trying to use run time linking or normal
 	# AIX style linking. If -brtl is somewhere in LDFLAGS, we
 	# need to do runtime linking.
-	case $host_os in aix4.[23]|aix4.[23].*|aix5*)
+	case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*)
 	  for ld_flag in $LDFLAGS; do
   	  if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
   	    aix_use_runtimelinking=yes
@@ -8100,19 +8487,18 @@
       link_all_deplibs=yes
     if test "$GCC" = yes ; then
     	output_verbose_link_cmd='echo'
-        archive_cmds='$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
-      module_cmds='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
-      # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
-      archive_expsym_cmds='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-      module_expsym_cmds='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag  -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+        archive_cmds="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}"
+        module_cmds="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}"
+        archive_expsym_cmds="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}"
+        module_expsym_cmds="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}"
     else
       case $cc_basename in
         xlc*)
          output_verbose_link_cmd='echo'
-         archive_cmds='$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $verstring'
+         archive_cmds='$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $xlcverstring'
          module_cmds='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
           # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
-         archive_expsym_cmds='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+         archive_expsym_cmds='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $xlcverstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
           module_expsym_cmds='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag  -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
           ;;
        *)
@@ -8274,24 +8660,28 @@
       ;;
 
     openbsd*)
-      hardcode_direct=yes
-      hardcode_shlibpath_var=no
-      if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-	archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
-	archive_expsym_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
-	hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
-	export_dynamic_flag_spec='${wl}-E'
+      if test -f /usr/libexec/ld.so; then
+	hardcode_direct=yes
+	hardcode_shlibpath_var=no
+	if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+	  archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+	  archive_expsym_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
+	  hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
+	  export_dynamic_flag_spec='${wl}-E'
+	else
+	  case $host_os in
+	   openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*)
+	     archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+	     hardcode_libdir_flag_spec='-R$libdir'
+	     ;;
+	   *)
+	     archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+	     hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
+	     ;;
+	  esac
+        fi
       else
-       case $host_os in
-	 openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*)
-	   archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-	   hardcode_libdir_flag_spec='-R$libdir'
-	   ;;
-	 *)
-	   archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
-	   hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
-	   ;;
-       esac
+	ld_shlibs=no
       fi
       ;;
 
@@ -8620,7 +9010,7 @@
   soname_spec='${libname}${release}${shared_ext}$major'
   ;;
 
-aix4* | aix5*)
+aix[4-9]*)
   version_type=linux
   need_lib_prefix=no
   need_version=no
@@ -8788,7 +9178,14 @@
     *) objformat=elf ;;
     esac
   fi
-  version_type=freebsd-$objformat
+  # Handle Gentoo/FreeBSD as it was Linux
+  case $host_vendor in
+    gentoo)
+      version_type=linux ;;
+    *)
+      version_type=freebsd-$objformat ;;
+  esac
+
   case $version_type in
     freebsd-elf*)
       library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
@@ -8799,6 +9196,12 @@
       library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
       need_version=yes
       ;;
+    linux)
+      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+      soname_spec='${libname}${release}${shared_ext}$major'
+      need_lib_prefix=no
+      need_version=no
+      ;;
   esac
   shlibpath_var=LD_LIBRARY_PATH
   case $host_os in
@@ -8877,7 +9280,7 @@
   postinstall_cmds='chmod 555 $lib'
   ;;
 
-interix3*)
+interix[3-9]*)
   version_type=linux
   need_lib_prefix=no
   need_version=no
@@ -8948,7 +9351,7 @@
 
   # Append ld.so.conf contents to the search path
   if test -f /etc/ld.so.conf; then
-    lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;s/[:,	]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
+    lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ 	]*hwcap[ 	]/d;s/[:,	]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
     sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
   fi
 
@@ -9142,6 +9545,21 @@
 echo "${ECHO_T}$dynamic_linker" >&6; }
 test "$dynamic_linker" = no && can_build_shared=no
 
+if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  lt_cv_sys_lib_search_path_spec="$sys_lib_search_path_spec"
+fi
+
+sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec"
+if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  lt_cv_sys_lib_dlsearch_path_spec="$sys_lib_dlsearch_path_spec"
+fi
+
+sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec"
+
 variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
 if test "$GCC" = yes; then
   variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
@@ -9461,7 +9879,7 @@
 { echo "$as_me:$LINENO: result: $ac_cv_lib_dld_shl_load" >&5
 echo "${ECHO_T}$ac_cv_lib_dld_shl_load" >&6; }
 if test $ac_cv_lib_dld_shl_load = yes; then
-  lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-dld"
+  lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld"
 else
   { echo "$as_me:$LINENO: checking for dlopen" >&5
 echo $ECHO_N "checking for dlopen... $ECHO_C" >&6; }
@@ -9737,7 +10155,7 @@
 { echo "$as_me:$LINENO: result: $ac_cv_lib_dld_dld_link" >&5
 echo "${ECHO_T}$ac_cv_lib_dld_dld_link" >&6; }
 if test $ac_cv_lib_dld_dld_link = yes; then
-  lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-dld"
+  lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld"
 fi
 
 
@@ -9786,7 +10204,7 @@
   lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
   lt_status=$lt_dlunknown
   cat > conftest.$ac_ext <<EOF
-#line 9789 "configure"
+#line 10207 "configure"
 #include "confdefs.h"
 
 #if HAVE_DLFCN_H
@@ -9886,7 +10304,7 @@
   lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
   lt_status=$lt_dlunknown
   cat > conftest.$ac_ext <<EOF
-#line 9889 "configure"
+#line 10307 "configure"
 #include "confdefs.h"
 
 #if HAVE_DLFCN_H
@@ -10013,7 +10431,7 @@
   fi
   ;;
 
-aix4* | aix5*)
+aix[4-9]*)
   if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
     test "$enable_shared" = yes && enable_static=no
   fi
@@ -10069,6 +10487,7 @@
     predeps \
     postdeps \
     compiler_lib_search_path \
+    compiler_lib_search_dirs \
     archive_cmds \
     archive_expsym_cmds \
     postinstall_cmds \
@@ -10084,6 +10503,7 @@
     module_cmds \
     module_expsym_cmds \
     lt_cv_prog_compiler_c_o \
+    fix_srcfile_path \
     exclude_expsyms \
     include_expsyms; do
 
@@ -10128,7 +10548,7 @@
 # Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP)
 # NOTE: Changes made to this file will be lost: look at ltmain.sh.
 #
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008
 # Free Software Foundation, Inc.
 #
 # This file is part of GNU Libtool:
@@ -10364,6 +10784,10 @@
 # shared library.
 postdeps=$lt_postdeps
 
+# The directories searched by this compiler when creating a shared
+# library
+compiler_lib_search_dirs=$lt_compiler_lib_search_dirs
+
 # The library search path used internally by the compiler when linking
 # a shared library.
 compiler_lib_search_path=$lt_compiler_lib_search_path
@@ -10452,7 +10876,7 @@
 sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
 
 # Fix the shell variable \$srcfile for the compiler.
-fix_srcfile_path="$fix_srcfile_path"
+fix_srcfile_path=$lt_fix_srcfile_path
 
 # Set to yes if exported symbols are required.
 always_export_symbols=$always_export_symbols
@@ -10612,6 +11036,7 @@
 predeps_CXX=
 postdeps_CXX=
 compiler_lib_search_path_CXX=
+compiler_lib_search_dirs_CXX=
 
 # Source file extension for C++ test sources.
 ac_ext=cpp
@@ -10649,7 +11074,7 @@
 echo "$lt_simple_link_test_code" >conftest.$ac_ext
 eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
 _lt_linker_boilerplate=`cat conftest.err`
-$rm conftest*
+$rm -r conftest*
 
 
 # Allow CC to be a program name with arguments.
@@ -10856,7 +11281,7 @@
     # FIXME: insert proper C++ library support
     ld_shlibs_CXX=no
     ;;
-  aix4* | aix5*)
+  aix[4-9]*)
     if test "$host_cpu" = ia64; then
       # On IA64, the linker does run time linking by default, so we don't
       # have to do anything special.
@@ -10869,7 +11294,7 @@
       # Test if we are trying to use run time linking or normal
       # AIX style linking. If -brtl is somewhere in LDFLAGS, we
       # need to do runtime linking.
-      case $host_os in aix4.[23]|aix4.[23].*|aix5*)
+      case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*)
 	for ld_flag in $LDFLAGS; do
 	  case $ld_flag in
 	  *-brtl*)
@@ -11127,59 +11552,31 @@
     fi
   ;;
       darwin* | rhapsody*)
-        case $host_os in
-        rhapsody* | darwin1.[012])
-         allow_undefined_flag_CXX='${wl}-undefined ${wl}suppress'
-         ;;
-       *) # Darwin 1.3 on
-         if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then
-           allow_undefined_flag_CXX='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
-         else
-           case ${MACOSX_DEPLOYMENT_TARGET} in
-             10.[012])
-               allow_undefined_flag_CXX='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
-               ;;
-             10.*)
-               allow_undefined_flag_CXX='${wl}-undefined ${wl}dynamic_lookup'
-               ;;
-           esac
-         fi
-         ;;
-        esac
       archive_cmds_need_lc_CXX=no
       hardcode_direct_CXX=no
       hardcode_automatic_CXX=yes
       hardcode_shlibpath_var_CXX=unsupported
       whole_archive_flag_spec_CXX=''
       link_all_deplibs_CXX=yes
-
-    if test "$GXX" = yes ; then
-      lt_int_apple_cc_single_mod=no
+      allow_undefined_flag_CXX="$_lt_dar_allow_undefined"
+      if test "$GXX" = yes ; then
       output_verbose_link_cmd='echo'
-      if $CC -dumpspecs 2>&1 | $EGREP 'single_module' >/dev/null ; then
-       lt_int_apple_cc_single_mod=yes
+      archive_cmds_CXX="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}"
+      module_cmds_CXX="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}"
+      archive_expsym_cmds_CXX="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}"
+      module_expsym_cmds_CXX="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}"
+      if test "$lt_cv_apple_cc_single_mod" != "yes"; then
+        archive_cmds_CXX="\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dsymutil}"
+        archive_expsym_cmds_CXX="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dar_export_syms}${_lt_dsymutil}"
       fi
-      if test "X$lt_int_apple_cc_single_mod" = Xyes ; then
-       archive_cmds_CXX='$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
-      else
-          archive_cmds_CXX='$CC -r -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
-        fi
-        module_cmds_CXX='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
-        # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
-          if test "X$lt_int_apple_cc_single_mod" = Xyes ; then
-            archive_expsym_cmds_CXX='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-          else
-            archive_expsym_cmds_CXX='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -r -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-          fi
-            module_expsym_cmds_CXX='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag  -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
       else
       case $cc_basename in
         xlc*)
          output_verbose_link_cmd='echo'
-          archive_cmds_CXX='$CC -qmkshrobj ${wl}-single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $verstring'
+          archive_cmds_CXX='$CC -qmkshrobj ${wl}-single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $xlcverstring'
           module_cmds_CXX='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
           # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
-          archive_expsym_cmds_CXX='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj ${wl}-single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+          archive_expsym_cmds_CXX='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj ${wl}-single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $xlcverstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
           module_expsym_cmds_CXX='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag  -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
           ;;
        *)
@@ -11330,7 +11727,7 @@
 	;;
     esac
     ;;
-  interix3*)
+  interix[3-9]*)
     hardcode_direct_CXX=no
     hardcode_shlibpath_var_CXX=no
     hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir'
@@ -11422,7 +11819,7 @@
 	export_dynamic_flag_spec_CXX='${wl}--export-dynamic'
 	whole_archive_flag_spec_CXX='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
 	;;
-      pgCC*)
+      pgCC* | pgcpp*)
         # Portland Group C++ compiler
 	archive_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
   	archive_expsym_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
@@ -11511,16 +11908,20 @@
     ld_shlibs_CXX=no
     ;;
   openbsd*)
-    hardcode_direct_CXX=yes
-    hardcode_shlibpath_var_CXX=no
-    archive_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
-    hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir'
-    if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-      archive_expsym_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib'
-      export_dynamic_flag_spec_CXX='${wl}-E'
-      whole_archive_flag_spec_CXX="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+    if test -f /usr/libexec/ld.so; then
+      hardcode_direct_CXX=yes
+      hardcode_shlibpath_var_CXX=no
+      archive_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
+      hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir'
+      if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+	archive_expsym_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib'
+	export_dynamic_flag_spec_CXX='${wl}-E'
+	whole_archive_flag_spec_CXX="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+      fi
+      output_verbose_link_cmd='echo'
+    else
+      ld_shlibs_CXX=no
     fi
-    output_verbose_link_cmd='echo'
     ;;
   osf3*)
     case $cc_basename in
@@ -11825,7 +12226,6 @@
 GCC_CXX="$GXX"
 LD_CXX="$LD"
 
-
 cat > conftest.$ac_ext <<EOF
 class Foo
 {
@@ -11927,9 +12327,14 @@
 
 $rm -f confest.$objext
 
+compiler_lib_search_dirs_CXX=
+if test -n "$compiler_lib_search_path_CXX"; then
+  compiler_lib_search_dirs_CXX=`echo " ${compiler_lib_search_path_CXX}" | ${SED} -e 's! -L! !g' -e 's!^ !!'`
+fi
+
 # PORTME: override above test on systems where it is broken
 case $host_os in
-interix3*)
+interix[3-9]*)
   # Interix 3.5 installs completely hosed .la files for C++, so rather than
   # hack all around it, let's just trust "g++" to DTRT.
   predep_objects_CXX=
@@ -11982,7 +12387,6 @@
   ;;
 esac
 
-
 case " $postdeps_CXX " in
 *" -lc "*) archive_cmds_need_lc_CXX=no ;;
 esac
@@ -12032,7 +12436,7 @@
       # DJGPP does not support shared libraries at all
       lt_prog_compiler_pic_CXX=
       ;;
-    interix3*)
+    interix[3-9]*)
       # Interix 3.x gcc -fpic/-fPIC options generate broken code.
       # Instead, we relocate shared libraries at runtime.
       ;;
@@ -12058,7 +12462,7 @@
     esac
   else
     case $host_os in
-      aix4* | aix5*)
+      aix[4-9]*)
 	# All AIX code is PIC.
 	if test "$host_cpu" = ia64; then
 	  # AIX 5 now supports IA64 processor
@@ -12154,7 +12558,7 @@
 	    lt_prog_compiler_pic_CXX='-KPIC'
 	    lt_prog_compiler_static_CXX='-static'
 	    ;;
-	  pgCC*)
+	  pgCC* | pgcpp*)
 	    # Portland Group C++ compiler.
 	    lt_prog_compiler_wl_CXX='-Wl,'
 	    lt_prog_compiler_pic_CXX='-fpic'
@@ -12285,10 +12689,10 @@
 
 { echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic_CXX works" >&5
 echo $ECHO_N "checking if $compiler PIC flag $lt_prog_compiler_pic_CXX works... $ECHO_C" >&6; }
-if test "${lt_prog_compiler_pic_works_CXX+set}" = set; then
+if test "${lt_cv_prog_compiler_pic_works_CXX+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
-  lt_prog_compiler_pic_works_CXX=no
+  lt_cv_prog_compiler_pic_works_CXX=no
   ac_outfile=conftest.$ac_objext
    echo "$lt_simple_compile_test_code" > conftest.$ac_ext
    lt_compiler_flag="$lt_prog_compiler_pic_CXX -DPIC"
@@ -12301,27 +12705,27 @@
    -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
    -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
    -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:12304: $lt_compile\"" >&5)
+   (eval echo "\"\$as_me:12708: $lt_compile\"" >&5)
    (eval "$lt_compile" 2>conftest.err)
    ac_status=$?
    cat conftest.err >&5
-   echo "$as_me:12308: \$? = $ac_status" >&5
+   echo "$as_me:12712: \$? = $ac_status" >&5
    if (exit $ac_status) && test -s "$ac_outfile"; then
      # The compiler can only warn and ignore the option if not recognized
      # So say no if there are warnings other than the usual output.
      $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
      $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
      if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
-       lt_prog_compiler_pic_works_CXX=yes
+       lt_cv_prog_compiler_pic_works_CXX=yes
      fi
    fi
    $rm conftest*
 
 fi
-{ echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_works_CXX" >&5
-echo "${ECHO_T}$lt_prog_compiler_pic_works_CXX" >&6; }
+{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_pic_works_CXX" >&5
+echo "${ECHO_T}$lt_cv_prog_compiler_pic_works_CXX" >&6; }
 
-if test x"$lt_prog_compiler_pic_works_CXX" = xyes; then
+if test x"$lt_cv_prog_compiler_pic_works_CXX" = xyes; then
     case $lt_prog_compiler_pic_CXX in
      "" | " "*) ;;
      *) lt_prog_compiler_pic_CXX=" $lt_prog_compiler_pic_CXX" ;;
@@ -12348,10 +12752,10 @@
 wl=$lt_prog_compiler_wl_CXX eval lt_tmp_static_flag=\"$lt_prog_compiler_static_CXX\"
 { echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5
 echo $ECHO_N "checking if $compiler static flag $lt_tmp_static_flag works... $ECHO_C" >&6; }
-if test "${lt_prog_compiler_static_works_CXX+set}" = set; then
+if test "${lt_cv_prog_compiler_static_works_CXX+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
-  lt_prog_compiler_static_works_CXX=no
+  lt_cv_prog_compiler_static_works_CXX=no
    save_LDFLAGS="$LDFLAGS"
    LDFLAGS="$LDFLAGS $lt_tmp_static_flag"
    echo "$lt_simple_link_test_code" > conftest.$ac_ext
@@ -12364,20 +12768,20 @@
        $echo "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp
        $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
        if diff conftest.exp conftest.er2 >/dev/null; then
-         lt_prog_compiler_static_works_CXX=yes
+         lt_cv_prog_compiler_static_works_CXX=yes
        fi
      else
-       lt_prog_compiler_static_works_CXX=yes
+       lt_cv_prog_compiler_static_works_CXX=yes
      fi
    fi
-   $rm conftest*
+   $rm -r conftest*
    LDFLAGS="$save_LDFLAGS"
 
 fi
-{ echo "$as_me:$LINENO: result: $lt_prog_compiler_static_works_CXX" >&5
-echo "${ECHO_T}$lt_prog_compiler_static_works_CXX" >&6; }
+{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_static_works_CXX" >&5
+echo "${ECHO_T}$lt_cv_prog_compiler_static_works_CXX" >&6; }
 
-if test x"$lt_prog_compiler_static_works_CXX" = xyes; then
+if test x"$lt_cv_prog_compiler_static_works_CXX" = xyes; then
     :
 else
     lt_prog_compiler_static_CXX=
@@ -12405,11 +12809,11 @@
    -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
    -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
    -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:12408: $lt_compile\"" >&5)
+   (eval echo "\"\$as_me:12812: $lt_compile\"" >&5)
    (eval "$lt_compile" 2>out/conftest.err)
    ac_status=$?
    cat out/conftest.err >&5
-   echo "$as_me:12412: \$? = $ac_status" >&5
+   echo "$as_me:12816: \$? = $ac_status" >&5
    if (exit $ac_status) && test -s out/conftest2.$ac_objext
    then
      # The compiler can only warn and ignore the option if not recognized
@@ -12462,7 +12866,7 @@
 
   export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
   case $host_os in
-  aix4* | aix5*)
+  aix[4-9]*)
     # If we're using GNU nm, then we don't want the "-C" option.
     # -C means demangle to AIX nm, but means don't demangle with GNU nm
     if $NM -V 2>&1 | grep 'GNU' > /dev/null; then
@@ -12481,6 +12885,7 @@
     export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
   ;;
   esac
+  exclude_expsyms_CXX='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'
 
 { echo "$as_me:$LINENO: result: $ld_shlibs_CXX" >&5
 echo "${ECHO_T}$ld_shlibs_CXX" >&6; }
@@ -12582,7 +12987,7 @@
   soname_spec='${libname}${release}${shared_ext}$major'
   ;;
 
-aix4* | aix5*)
+aix[4-9]*)
   version_type=linux
   need_lib_prefix=no
   need_version=no
@@ -12749,7 +13154,14 @@
     *) objformat=elf ;;
     esac
   fi
-  version_type=freebsd-$objformat
+  # Handle Gentoo/FreeBSD as it was Linux
+  case $host_vendor in
+    gentoo)
+      version_type=linux ;;
+    *)
+      version_type=freebsd-$objformat ;;
+  esac
+
   case $version_type in
     freebsd-elf*)
       library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
@@ -12760,6 +13172,12 @@
       library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
       need_version=yes
       ;;
+    linux)
+      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+      soname_spec='${libname}${release}${shared_ext}$major'
+      need_lib_prefix=no
+      need_version=no
+      ;;
   esac
   shlibpath_var=LD_LIBRARY_PATH
   case $host_os in
@@ -12838,7 +13256,7 @@
   postinstall_cmds='chmod 555 $lib'
   ;;
 
-interix3*)
+interix[3-9]*)
   version_type=linux
   need_lib_prefix=no
   need_version=no
@@ -12909,7 +13327,7 @@
 
   # Append ld.so.conf contents to the search path
   if test -f /etc/ld.so.conf; then
-    lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;s/[:,	]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
+    lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ 	]*hwcap[ 	]/d;s/[:,	]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
     sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
   fi
 
@@ -13103,6 +13521,21 @@
 echo "${ECHO_T}$dynamic_linker" >&6; }
 test "$dynamic_linker" = no && can_build_shared=no
 
+if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  lt_cv_sys_lib_search_path_spec="$sys_lib_search_path_spec"
+fi
+
+sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec"
+if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  lt_cv_sys_lib_dlsearch_path_spec="$sys_lib_dlsearch_path_spec"
+fi
+
+sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec"
+
 variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
 if test "$GCC" = yes; then
   variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
@@ -13186,6 +13619,7 @@
     predeps_CXX \
     postdeps_CXX \
     compiler_lib_search_path_CXX \
+    compiler_lib_search_dirs_CXX \
     archive_cmds_CXX \
     archive_expsym_cmds_CXX \
     postinstall_cmds_CXX \
@@ -13201,6 +13635,7 @@
     module_cmds_CXX \
     module_expsym_cmds_CXX \
     lt_cv_prog_compiler_c_o_CXX \
+    fix_srcfile_path_CXX \
     exclude_expsyms_CXX \
     include_expsyms_CXX; do
 
@@ -13433,6 +13868,10 @@
 # shared library.
 postdeps=$lt_postdeps_CXX
 
+# The directories searched by this compiler when creating a shared
+# library
+compiler_lib_search_dirs=$lt_compiler_lib_search_dirs_CXX
+
 # The library search path used internally by the compiler when linking
 # a shared library.
 compiler_lib_search_path=$lt_compiler_lib_search_path_CXX
@@ -13521,7 +13960,7 @@
 sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
 
 # Fix the shell variable \$srcfile for the compiler.
-fix_srcfile_path="$fix_srcfile_path_CXX"
+fix_srcfile_path=$lt_fix_srcfile_path
 
 # Set to yes if exported symbols are required.
 always_export_symbols=$always_export_symbols_CXX
@@ -13647,7 +14086,7 @@
 echo "$lt_simple_link_test_code" >conftest.$ac_ext
 eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
 _lt_linker_boilerplate=`cat conftest.err`
-$rm conftest*
+$rm -r conftest*
 
 
 # Allow CC to be a program name with arguments.
@@ -13685,7 +14124,7 @@
     postinstall_cmds='$RANLIB $lib'
   fi
   ;;
-aix4* | aix5*)
+aix[4-9]*)
   if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
     test "$enable_shared" = yes && enable_static=no
   fi
@@ -13749,7 +14188,7 @@
       lt_prog_compiler_pic_F77='-fno-common'
       ;;
 
-    interix3*)
+    interix[3-9]*)
       # Interix 3.x gcc -fpic/-fPIC options generate broken code.
       # Instead, we relocate shared libraries at runtime.
       ;;
@@ -13950,10 +14389,10 @@
 
 { echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic_F77 works" >&5
 echo $ECHO_N "checking if $compiler PIC flag $lt_prog_compiler_pic_F77 works... $ECHO_C" >&6; }
-if test "${lt_prog_compiler_pic_works_F77+set}" = set; then
+if test "${lt_cv_prog_compiler_pic_works_F77+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
-  lt_prog_compiler_pic_works_F77=no
+  lt_cv_prog_compiler_pic_works_F77=no
   ac_outfile=conftest.$ac_objext
    echo "$lt_simple_compile_test_code" > conftest.$ac_ext
    lt_compiler_flag="$lt_prog_compiler_pic_F77"
@@ -13966,27 +14405,27 @@
    -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
    -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
    -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:13969: $lt_compile\"" >&5)
+   (eval echo "\"\$as_me:14408: $lt_compile\"" >&5)
    (eval "$lt_compile" 2>conftest.err)
    ac_status=$?
    cat conftest.err >&5
-   echo "$as_me:13973: \$? = $ac_status" >&5
+   echo "$as_me:14412: \$? = $ac_status" >&5
    if (exit $ac_status) && test -s "$ac_outfile"; then
      # The compiler can only warn and ignore the option if not recognized
      # So say no if there are warnings other than the usual output.
      $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
      $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
      if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
-       lt_prog_compiler_pic_works_F77=yes
+       lt_cv_prog_compiler_pic_works_F77=yes
      fi
    fi
    $rm conftest*
 
 fi
-{ echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_works_F77" >&5
-echo "${ECHO_T}$lt_prog_compiler_pic_works_F77" >&6; }
+{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_pic_works_F77" >&5
+echo "${ECHO_T}$lt_cv_prog_compiler_pic_works_F77" >&6; }
 
-if test x"$lt_prog_compiler_pic_works_F77" = xyes; then
+if test x"$lt_cv_prog_compiler_pic_works_F77" = xyes; then
     case $lt_prog_compiler_pic_F77 in
      "" | " "*) ;;
      *) lt_prog_compiler_pic_F77=" $lt_prog_compiler_pic_F77" ;;
@@ -14013,10 +14452,10 @@
 wl=$lt_prog_compiler_wl_F77 eval lt_tmp_static_flag=\"$lt_prog_compiler_static_F77\"
 { echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5
 echo $ECHO_N "checking if $compiler static flag $lt_tmp_static_flag works... $ECHO_C" >&6; }
-if test "${lt_prog_compiler_static_works_F77+set}" = set; then
+if test "${lt_cv_prog_compiler_static_works_F77+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
-  lt_prog_compiler_static_works_F77=no
+  lt_cv_prog_compiler_static_works_F77=no
    save_LDFLAGS="$LDFLAGS"
    LDFLAGS="$LDFLAGS $lt_tmp_static_flag"
    echo "$lt_simple_link_test_code" > conftest.$ac_ext
@@ -14029,20 +14468,20 @@
        $echo "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp
        $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
        if diff conftest.exp conftest.er2 >/dev/null; then
-         lt_prog_compiler_static_works_F77=yes
+         lt_cv_prog_compiler_static_works_F77=yes
        fi
      else
-       lt_prog_compiler_static_works_F77=yes
+       lt_cv_prog_compiler_static_works_F77=yes
      fi
    fi
-   $rm conftest*
+   $rm -r conftest*
    LDFLAGS="$save_LDFLAGS"
 
 fi
-{ echo "$as_me:$LINENO: result: $lt_prog_compiler_static_works_F77" >&5
-echo "${ECHO_T}$lt_prog_compiler_static_works_F77" >&6; }
+{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_static_works_F77" >&5
+echo "${ECHO_T}$lt_cv_prog_compiler_static_works_F77" >&6; }
 
-if test x"$lt_prog_compiler_static_works_F77" = xyes; then
+if test x"$lt_cv_prog_compiler_static_works_F77" = xyes; then
     :
 else
     lt_prog_compiler_static_F77=
@@ -14070,11 +14509,11 @@
    -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
    -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
    -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:14073: $lt_compile\"" >&5)
+   (eval echo "\"\$as_me:14512: $lt_compile\"" >&5)
    (eval "$lt_compile" 2>out/conftest.err)
    ac_status=$?
    cat out/conftest.err >&5
-   echo "$as_me:14077: \$? = $ac_status" >&5
+   echo "$as_me:14516: \$? = $ac_status" >&5
    if (exit $ac_status) && test -s out/conftest2.$ac_objext
    then
      # The compiler can only warn and ignore the option if not recognized
@@ -14154,12 +14593,13 @@
   # it will be wrapped by ` (' and `)$', so one must not match beginning or
   # end of line.  Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
   # as well as any symbol that contains `d'.
-  exclude_expsyms_F77="_GLOBAL_OFFSET_TABLE_"
+  exclude_expsyms_F77='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'
   # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
   # platforms (ab)use it in PIC code, but their linkers get confused if
   # the symbol is explicitly referenced.  Since portable code cannot
   # rely on this symbol name, it's probably fine to never include it in
   # preloaded symbol tables.
+  # Exclude shared library initialization/finalization symbols.
   extract_expsyms_cmds=
   # Just being paranoid about ensuring that cc_basename is set.
   for cc_temp in $compiler""; do
@@ -14218,7 +14658,7 @@
 
     # See if GNU ld supports shared libraries.
     case $host_os in
-    aix3* | aix4* | aix5*)
+    aix[3-9]*)
       # On AIX/PPC, the GNU linker is very broken
       if test "$host_cpu" != ia64; then
 	ld_shlibs_F77=no
@@ -14284,7 +14724,7 @@
       fi
       ;;
 
-    interix3*)
+    interix[3-9]*)
       hardcode_direct_F77=no
       hardcode_shlibpath_var_F77=no
       hardcode_libdir_flag_spec_F77='${wl}-rpath,$libdir'
@@ -14437,7 +14877,7 @@
       fi
       ;;
 
-    aix4* | aix5*)
+    aix[4-9]*)
       if test "$host_cpu" = ia64; then
 	# On IA64, the linker does run time linking by default, so we don't
 	# have to do anything special.
@@ -14457,7 +14897,7 @@
 	# Test if we are trying to use run time linking or normal
 	# AIX style linking. If -brtl is somewhere in LDFLAGS, we
 	# need to do runtime linking.
-	case $host_os in aix4.[23]|aix4.[23].*|aix5*)
+	case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*)
 	  for ld_flag in $LDFLAGS; do
   	  if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
   	    aix_use_runtimelinking=yes
@@ -14709,19 +15149,18 @@
       link_all_deplibs_F77=yes
     if test "$GCC" = yes ; then
     	output_verbose_link_cmd='echo'
-        archive_cmds_F77='$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
-      module_cmds_F77='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
-      # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
-      archive_expsym_cmds_F77='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-      module_expsym_cmds_F77='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag  -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+        archive_cmds_F77="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}"
+        module_cmds_F77="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}"
+        archive_expsym_cmds_F77="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}"
+        module_expsym_cmds_F77="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}"
     else
       case $cc_basename in
         xlc*)
          output_verbose_link_cmd='echo'
-         archive_cmds_F77='$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $verstring'
+         archive_cmds_F77='$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $xlcverstring'
          module_cmds_F77='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
           # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
-         archive_expsym_cmds_F77='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+         archive_expsym_cmds_F77='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $xlcverstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
           module_expsym_cmds_F77='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag  -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
           ;;
        *)
@@ -14883,24 +15322,28 @@
       ;;
 
     openbsd*)
-      hardcode_direct_F77=yes
-      hardcode_shlibpath_var_F77=no
-      if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-	archive_cmds_F77='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
-	archive_expsym_cmds_F77='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
-	hardcode_libdir_flag_spec_F77='${wl}-rpath,$libdir'
-	export_dynamic_flag_spec_F77='${wl}-E'
+      if test -f /usr/libexec/ld.so; then
+	hardcode_direct_F77=yes
+	hardcode_shlibpath_var_F77=no
+	if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+	  archive_cmds_F77='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+	  archive_expsym_cmds_F77='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
+	  hardcode_libdir_flag_spec_F77='${wl}-rpath,$libdir'
+	  export_dynamic_flag_spec_F77='${wl}-E'
+	else
+	  case $host_os in
+	   openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*)
+	     archive_cmds_F77='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+	     hardcode_libdir_flag_spec_F77='-R$libdir'
+	     ;;
+	   *)
+	     archive_cmds_F77='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+	     hardcode_libdir_flag_spec_F77='${wl}-rpath,$libdir'
+	     ;;
+	  esac
+        fi
       else
-       case $host_os in
-	 openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*)
-	   archive_cmds_F77='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-	   hardcode_libdir_flag_spec_F77='-R$libdir'
-	   ;;
-	 *)
-	   archive_cmds_F77='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
-	   hardcode_libdir_flag_spec_F77='${wl}-rpath,$libdir'
-	   ;;
-       esac
+	ld_shlibs_F77=no
       fi
       ;;
 
@@ -15178,7 +15621,7 @@
   soname_spec='${libname}${release}${shared_ext}$major'
   ;;
 
-aix4* | aix5*)
+aix[4-9]*)
   version_type=linux
   need_lib_prefix=no
   need_version=no
@@ -15345,7 +15788,14 @@
     *) objformat=elf ;;
     esac
   fi
-  version_type=freebsd-$objformat
+  # Handle Gentoo/FreeBSD as it was Linux
+  case $host_vendor in
+    gentoo)
+      version_type=linux ;;
+    *)
+      version_type=freebsd-$objformat ;;
+  esac
+
   case $version_type in
     freebsd-elf*)
       library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
@@ -15356,6 +15806,12 @@
       library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
       need_version=yes
       ;;
+    linux)
+      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+      soname_spec='${libname}${release}${shared_ext}$major'
+      need_lib_prefix=no
+      need_version=no
+      ;;
   esac
   shlibpath_var=LD_LIBRARY_PATH
   case $host_os in
@@ -15434,7 +15890,7 @@
   postinstall_cmds='chmod 555 $lib'
   ;;
 
-interix3*)
+interix[3-9]*)
   version_type=linux
   need_lib_prefix=no
   need_version=no
@@ -15505,7 +15961,7 @@
 
   # Append ld.so.conf contents to the search path
   if test -f /etc/ld.so.conf; then
-    lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;s/[:,	]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
+    lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ 	]*hwcap[ 	]/d;s/[:,	]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
     sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
   fi
 
@@ -15699,6 +16155,21 @@
 echo "${ECHO_T}$dynamic_linker" >&6; }
 test "$dynamic_linker" = no && can_build_shared=no
 
+if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  lt_cv_sys_lib_search_path_spec="$sys_lib_search_path_spec"
+fi
+
+sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec"
+if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  lt_cv_sys_lib_dlsearch_path_spec="$sys_lib_dlsearch_path_spec"
+fi
+
+sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec"
+
 variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
 if test "$GCC" = yes; then
   variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
@@ -15782,6 +16253,7 @@
     predeps_F77 \
     postdeps_F77 \
     compiler_lib_search_path_F77 \
+    compiler_lib_search_dirs_F77 \
     archive_cmds_F77 \
     archive_expsym_cmds_F77 \
     postinstall_cmds_F77 \
@@ -15797,6 +16269,7 @@
     module_cmds_F77 \
     module_expsym_cmds_F77 \
     lt_cv_prog_compiler_c_o_F77 \
+    fix_srcfile_path_F77 \
     exclude_expsyms_F77 \
     include_expsyms_F77; do
 
@@ -16029,6 +16502,10 @@
 # shared library.
 postdeps=$lt_postdeps_F77
 
+# The directories searched by this compiler when creating a shared
+# library
+compiler_lib_search_dirs=$lt_compiler_lib_search_dirs_F77
+
 # The library search path used internally by the compiler when linking
 # a shared library.
 compiler_lib_search_path=$lt_compiler_lib_search_path_F77
@@ -16117,7 +16594,7 @@
 sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
 
 # Fix the shell variable \$srcfile for the compiler.
-fix_srcfile_path="$fix_srcfile_path_F77"
+fix_srcfile_path=$lt_fix_srcfile_path
 
 # Set to yes if exported symbols are required.
 always_export_symbols=$always_export_symbols_F77
@@ -16203,7 +16680,7 @@
 echo "$lt_simple_link_test_code" >conftest.$ac_ext
 eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
 _lt_linker_boilerplate=`cat conftest.err`
-$rm conftest*
+$rm -r conftest*
 
 
 # Allow CC to be a program name with arguments.
@@ -16252,11 +16729,11 @@
    -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
    -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
    -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:16255: $lt_compile\"" >&5)
+   (eval echo "\"\$as_me:16732: $lt_compile\"" >&5)
    (eval "$lt_compile" 2>conftest.err)
    ac_status=$?
    cat conftest.err >&5
-   echo "$as_me:16259: \$? = $ac_status" >&5
+   echo "$as_me:16736: \$? = $ac_status" >&5
    if (exit $ac_status) && test -s "$ac_outfile"; then
      # The compiler can only warn and ignore the option if not recognized
      # So say no if there are warnings other than the usual output.
@@ -16316,7 +16793,7 @@
       # built for inclusion in a dll (and should export symbols for example).
       # Although the cygwin gcc ignores -fPIC, still need this for old-style
       # (--disable-auto-import) libraries
-      lt_prog_compiler_pic_GCJ='-DDLL_EXPORT'
+
       ;;
 
     darwin* | rhapsody*)
@@ -16325,7 +16802,7 @@
       lt_prog_compiler_pic_GCJ='-fno-common'
       ;;
 
-    interix3*)
+    interix[3-9]*)
       # Interix 3.x gcc -fpic/-fPIC options generate broken code.
       # Instead, we relocate shared libraries at runtime.
       ;;
@@ -16386,7 +16863,7 @@
     mingw* | cygwin* | pw32* | os2*)
       # This hack is so that the source file can tell whether it is being
       # built for inclusion in a dll (and should export symbols for example).
-      lt_prog_compiler_pic_GCJ='-DDLL_EXPORT'
+
       ;;
 
     hpux9* | hpux10* | hpux11*)
@@ -16526,10 +17003,10 @@
 
 { echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic_GCJ works" >&5
 echo $ECHO_N "checking if $compiler PIC flag $lt_prog_compiler_pic_GCJ works... $ECHO_C" >&6; }
-if test "${lt_prog_compiler_pic_works_GCJ+set}" = set; then
+if test "${lt_cv_prog_compiler_pic_works_GCJ+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
-  lt_prog_compiler_pic_works_GCJ=no
+  lt_cv_prog_compiler_pic_works_GCJ=no
   ac_outfile=conftest.$ac_objext
    echo "$lt_simple_compile_test_code" > conftest.$ac_ext
    lt_compiler_flag="$lt_prog_compiler_pic_GCJ"
@@ -16542,27 +17019,27 @@
    -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
    -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
    -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:16545: $lt_compile\"" >&5)
+   (eval echo "\"\$as_me:17022: $lt_compile\"" >&5)
    (eval "$lt_compile" 2>conftest.err)
    ac_status=$?
    cat conftest.err >&5
-   echo "$as_me:16549: \$? = $ac_status" >&5
+   echo "$as_me:17026: \$? = $ac_status" >&5
    if (exit $ac_status) && test -s "$ac_outfile"; then
      # The compiler can only warn and ignore the option if not recognized
      # So say no if there are warnings other than the usual output.
      $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
      $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
      if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
-       lt_prog_compiler_pic_works_GCJ=yes
+       lt_cv_prog_compiler_pic_works_GCJ=yes
      fi
    fi
    $rm conftest*
 
 fi
-{ echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_works_GCJ" >&5
-echo "${ECHO_T}$lt_prog_compiler_pic_works_GCJ" >&6; }
+{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_pic_works_GCJ" >&5
+echo "${ECHO_T}$lt_cv_prog_compiler_pic_works_GCJ" >&6; }
 
-if test x"$lt_prog_compiler_pic_works_GCJ" = xyes; then
+if test x"$lt_cv_prog_compiler_pic_works_GCJ" = xyes; then
     case $lt_prog_compiler_pic_GCJ in
      "" | " "*) ;;
      *) lt_prog_compiler_pic_GCJ=" $lt_prog_compiler_pic_GCJ" ;;
@@ -16589,10 +17066,10 @@
 wl=$lt_prog_compiler_wl_GCJ eval lt_tmp_static_flag=\"$lt_prog_compiler_static_GCJ\"
 { echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5
 echo $ECHO_N "checking if $compiler static flag $lt_tmp_static_flag works... $ECHO_C" >&6; }
-if test "${lt_prog_compiler_static_works_GCJ+set}" = set; then
+if test "${lt_cv_prog_compiler_static_works_GCJ+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
-  lt_prog_compiler_static_works_GCJ=no
+  lt_cv_prog_compiler_static_works_GCJ=no
    save_LDFLAGS="$LDFLAGS"
    LDFLAGS="$LDFLAGS $lt_tmp_static_flag"
    echo "$lt_simple_link_test_code" > conftest.$ac_ext
@@ -16605,20 +17082,20 @@
        $echo "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp
        $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
        if diff conftest.exp conftest.er2 >/dev/null; then
-         lt_prog_compiler_static_works_GCJ=yes
+         lt_cv_prog_compiler_static_works_GCJ=yes
        fi
      else
-       lt_prog_compiler_static_works_GCJ=yes
+       lt_cv_prog_compiler_static_works_GCJ=yes
      fi
    fi
-   $rm conftest*
+   $rm -r conftest*
    LDFLAGS="$save_LDFLAGS"
 
 fi
-{ echo "$as_me:$LINENO: result: $lt_prog_compiler_static_works_GCJ" >&5
-echo "${ECHO_T}$lt_prog_compiler_static_works_GCJ" >&6; }
+{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_static_works_GCJ" >&5
+echo "${ECHO_T}$lt_cv_prog_compiler_static_works_GCJ" >&6; }
 
-if test x"$lt_prog_compiler_static_works_GCJ" = xyes; then
+if test x"$lt_cv_prog_compiler_static_works_GCJ" = xyes; then
     :
 else
     lt_prog_compiler_static_GCJ=
@@ -16646,11 +17123,11 @@
    -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
    -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
    -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:16649: $lt_compile\"" >&5)
+   (eval echo "\"\$as_me:17126: $lt_compile\"" >&5)
    (eval "$lt_compile" 2>out/conftest.err)
    ac_status=$?
    cat out/conftest.err >&5
-   echo "$as_me:16653: \$? = $ac_status" >&5
+   echo "$as_me:17130: \$? = $ac_status" >&5
    if (exit $ac_status) && test -s out/conftest2.$ac_objext
    then
      # The compiler can only warn and ignore the option if not recognized
@@ -16730,12 +17207,13 @@
   # it will be wrapped by ` (' and `)$', so one must not match beginning or
   # end of line.  Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
   # as well as any symbol that contains `d'.
-  exclude_expsyms_GCJ="_GLOBAL_OFFSET_TABLE_"
+  exclude_expsyms_GCJ='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'
   # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
   # platforms (ab)use it in PIC code, but their linkers get confused if
   # the symbol is explicitly referenced.  Since portable code cannot
   # rely on this symbol name, it's probably fine to never include it in
   # preloaded symbol tables.
+  # Exclude shared library initialization/finalization symbols.
   extract_expsyms_cmds=
   # Just being paranoid about ensuring that cc_basename is set.
   for cc_temp in $compiler""; do
@@ -16794,7 +17272,7 @@
 
     # See if GNU ld supports shared libraries.
     case $host_os in
-    aix3* | aix4* | aix5*)
+    aix[3-9]*)
       # On AIX/PPC, the GNU linker is very broken
       if test "$host_cpu" != ia64; then
 	ld_shlibs_GCJ=no
@@ -16860,7 +17338,7 @@
       fi
       ;;
 
-    interix3*)
+    interix[3-9]*)
       hardcode_direct_GCJ=no
       hardcode_shlibpath_var_GCJ=no
       hardcode_libdir_flag_spec_GCJ='${wl}-rpath,$libdir'
@@ -17013,7 +17491,7 @@
       fi
       ;;
 
-    aix4* | aix5*)
+    aix[4-9]*)
       if test "$host_cpu" = ia64; then
 	# On IA64, the linker does run time linking by default, so we don't
 	# have to do anything special.
@@ -17033,7 +17511,7 @@
 	# Test if we are trying to use run time linking or normal
 	# AIX style linking. If -brtl is somewhere in LDFLAGS, we
 	# need to do runtime linking.
-	case $host_os in aix4.[23]|aix4.[23].*|aix5*)
+	case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*)
 	  for ld_flag in $LDFLAGS; do
   	  if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
   	    aix_use_runtimelinking=yes
@@ -17305,19 +17783,18 @@
       link_all_deplibs_GCJ=yes
     if test "$GCC" = yes ; then
     	output_verbose_link_cmd='echo'
-        archive_cmds_GCJ='$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
-      module_cmds_GCJ='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
-      # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
-      archive_expsym_cmds_GCJ='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
-      module_expsym_cmds_GCJ='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag  -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+        archive_cmds_GCJ="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}"
+        module_cmds_GCJ="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}"
+        archive_expsym_cmds_GCJ="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}"
+        module_expsym_cmds_GCJ="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}"
     else
       case $cc_basename in
         xlc*)
          output_verbose_link_cmd='echo'
-         archive_cmds_GCJ='$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $verstring'
+         archive_cmds_GCJ='$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $xlcverstring'
          module_cmds_GCJ='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
           # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
-         archive_expsym_cmds_GCJ='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+         archive_expsym_cmds_GCJ='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $xlcverstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
           module_expsym_cmds_GCJ='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag  -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
           ;;
        *)
@@ -17479,24 +17956,28 @@
       ;;
 
     openbsd*)
-      hardcode_direct_GCJ=yes
-      hardcode_shlibpath_var_GCJ=no
-      if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-	archive_cmds_GCJ='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
-	archive_expsym_cmds_GCJ='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
-	hardcode_libdir_flag_spec_GCJ='${wl}-rpath,$libdir'
-	export_dynamic_flag_spec_GCJ='${wl}-E'
+      if test -f /usr/libexec/ld.so; then
+	hardcode_direct_GCJ=yes
+	hardcode_shlibpath_var_GCJ=no
+	if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+	  archive_cmds_GCJ='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+	  archive_expsym_cmds_GCJ='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
+	  hardcode_libdir_flag_spec_GCJ='${wl}-rpath,$libdir'
+	  export_dynamic_flag_spec_GCJ='${wl}-E'
+	else
+	  case $host_os in
+	   openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*)
+	     archive_cmds_GCJ='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+	     hardcode_libdir_flag_spec_GCJ='-R$libdir'
+	     ;;
+	   *)
+	     archive_cmds_GCJ='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+	     hardcode_libdir_flag_spec_GCJ='${wl}-rpath,$libdir'
+	     ;;
+	  esac
+        fi
       else
-       case $host_os in
-	 openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*)
-	   archive_cmds_GCJ='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-	   hardcode_libdir_flag_spec_GCJ='-R$libdir'
-	   ;;
-	 *)
-	   archive_cmds_GCJ='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
-	   hardcode_libdir_flag_spec_GCJ='${wl}-rpath,$libdir'
-	   ;;
-       esac
+	ld_shlibs_GCJ=no
       fi
       ;;
 
@@ -17774,7 +18255,7 @@
   soname_spec='${libname}${release}${shared_ext}$major'
   ;;
 
-aix4* | aix5*)
+aix[4-9]*)
   version_type=linux
   need_lib_prefix=no
   need_version=no
@@ -17941,7 +18422,14 @@
     *) objformat=elf ;;
     esac
   fi
-  version_type=freebsd-$objformat
+  # Handle Gentoo/FreeBSD as it was Linux
+  case $host_vendor in
+    gentoo)
+      version_type=linux ;;
+    *)
+      version_type=freebsd-$objformat ;;
+  esac
+
   case $version_type in
     freebsd-elf*)
       library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
@@ -17952,6 +18440,12 @@
       library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
       need_version=yes
       ;;
+    linux)
+      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+      soname_spec='${libname}${release}${shared_ext}$major'
+      need_lib_prefix=no
+      need_version=no
+      ;;
   esac
   shlibpath_var=LD_LIBRARY_PATH
   case $host_os in
@@ -18030,7 +18524,7 @@
   postinstall_cmds='chmod 555 $lib'
   ;;
 
-interix3*)
+interix[3-9]*)
   version_type=linux
   need_lib_prefix=no
   need_version=no
@@ -18101,7 +18595,7 @@
 
   # Append ld.so.conf contents to the search path
   if test -f /etc/ld.so.conf; then
-    lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;s/[:,	]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
+    lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ 	]*hwcap[ 	]/d;s/[:,	]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
     sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
   fi
 
@@ -18295,6 +18789,21 @@
 echo "${ECHO_T}$dynamic_linker" >&6; }
 test "$dynamic_linker" = no && can_build_shared=no
 
+if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  lt_cv_sys_lib_search_path_spec="$sys_lib_search_path_spec"
+fi
+
+sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec"
+if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  lt_cv_sys_lib_dlsearch_path_spec="$sys_lib_dlsearch_path_spec"
+fi
+
+sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec"
+
 variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
 if test "$GCC" = yes; then
   variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
@@ -18378,6 +18887,7 @@
     predeps_GCJ \
     postdeps_GCJ \
     compiler_lib_search_path_GCJ \
+    compiler_lib_search_dirs_GCJ \
     archive_cmds_GCJ \
     archive_expsym_cmds_GCJ \
     postinstall_cmds_GCJ \
@@ -18393,6 +18903,7 @@
     module_cmds_GCJ \
     module_expsym_cmds_GCJ \
     lt_cv_prog_compiler_c_o_GCJ \
+    fix_srcfile_path_GCJ \
     exclude_expsyms_GCJ \
     include_expsyms_GCJ; do
 
@@ -18625,6 +19136,10 @@
 # shared library.
 postdeps=$lt_postdeps_GCJ
 
+# The directories searched by this compiler when creating a shared
+# library
+compiler_lib_search_dirs=$lt_compiler_lib_search_dirs_GCJ
+
 # The library search path used internally by the compiler when linking
 # a shared library.
 compiler_lib_search_path=$lt_compiler_lib_search_path_GCJ
@@ -18713,7 +19228,7 @@
 sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
 
 # Fix the shell variable \$srcfile for the compiler.
-fix_srcfile_path="$fix_srcfile_path_GCJ"
+fix_srcfile_path=$lt_fix_srcfile_path
 
 # Set to yes if exported symbols are required.
 always_export_symbols=$always_export_symbols_GCJ
@@ -18798,7 +19313,7 @@
 echo "$lt_simple_link_test_code" >conftest.$ac_ext
 eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
 _lt_linker_boilerplate=`cat conftest.err`
-$rm conftest*
+$rm -r conftest*
 
 
 # Allow CC to be a program name with arguments.
@@ -18858,6 +19373,7 @@
     predeps_RC \
     postdeps_RC \
     compiler_lib_search_path_RC \
+    compiler_lib_search_dirs_RC \
     archive_cmds_RC \
     archive_expsym_cmds_RC \
     postinstall_cmds_RC \
@@ -18873,6 +19389,7 @@
     module_cmds_RC \
     module_expsym_cmds_RC \
     lt_cv_prog_compiler_c_o_RC \
+    fix_srcfile_path_RC \
     exclude_expsyms_RC \
     include_expsyms_RC; do
 
@@ -19105,6 +19622,10 @@
 # shared library.
 postdeps=$lt_postdeps_RC
 
+# The directories searched by this compiler when creating a shared
+# library
+compiler_lib_search_dirs=$lt_compiler_lib_search_dirs_RC
+
 # The library search path used internally by the compiler when linking
 # a shared library.
 compiler_lib_search_path=$lt_compiler_lib_search_path_RC
@@ -19193,7 +19714,7 @@
 sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
 
 # Fix the shell variable \$srcfile for the compiler.
-fix_srcfile_path="$fix_srcfile_path_RC"
+fix_srcfile_path=$lt_fix_srcfile_path
 
 # Set to yes if exported symbols are required.
 always_export_symbols=$always_export_symbols_RC
@@ -19468,8 +19989,61 @@
 
 
 
+## Check for wprintf
+{ echo "$as_me:$LINENO: checking for wprintf" >&5
+echo $ECHO_N "checking for wprintf... $ECHO_C" >&6; }
+cat >conftest.$ac_ext <<_ACEOF
+
+	#include <stdio.h>
+	#include <wchar.h>
+	int main() {
+	    wprintf((wchar_t *)0, 0);
+	    return 0;
+	}
+
+_ACEOF
+rm -f conftest.$ac_objext conftest$ac_exeext
+if { (ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_link") 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } && {
+	 test -z "$ac_c_werror_flag" ||
+	 test ! -s conftest.err
+       } && test -s conftest$ac_exeext &&
+       $as_test_x conftest$ac_exeext; then
+
+
+cat >>confdefs.h <<\_ACEOF
+#define HAVE_WPRINTF
+_ACEOF
+
+	{ echo "$as_me:$LINENO: result: yes" >&5
+echo "${ECHO_T}yes" >&6; }
+
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+
+	{ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
+
+fi
+
+rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
+      conftest$ac_exeext conftest.$ac_ext
+
 
-# URI_SIZEDOWN
+## Option for URI_SIZEDOWN
 # Check whether --enable-sizedown was given.
 if test "${enable_sizedown+set}" = set; then
   enableval=$enable_sizedown;
@@ -19479,8 +20053,7 @@
 
 
 
-
-# These are for and from CppTest
+## Checks for and from CppTest
 
 for ac_header in sys/time.h
 do
@@ -19769,8 +20342,34 @@
 fi
 
 
+## Local headers must come very first. Otherwise we
+## risk including headers of an already installed
+## uriparser version if its path is in CPPFLAGS
+CPPFLAGS="-I${srcdir}/include ${CPPFLAGS}"
+
+
+## API documentation
+URI_GENERATE_DOC=0
+# Check whether --enable-doc was given.
+if test "${enable_doc+set}" = set; then
+  enableval=$enable_doc;
+	subdirs="$subdirs doc"
+
+	URI_GENERATE_DOC=1
+
+fi
+
+ if test x${URI_GENERATE_DOC} = x1; then
+  URI_GENERATE_DOC_TRUE=
+  URI_GENERATE_DOC_FALSE='#'
+else
+  URI_GENERATE_DOC_TRUE='#'
+  URI_GENERATE_DOC_FALSE=
+fi
+
+
 
-ac_config_files="$ac_config_files Makefile"
+ac_config_files="$ac_config_files Makefile doc/Makefile"
 
 cat >confcache <<\_ACEOF
 # This file is a shell script that caches the results of configure
@@ -19889,6 +20488,13 @@
 Usually this means the macro was only invoked conditionally." >&2;}
    { (exit 1); exit 1; }; }
 fi
+if test -z "${URI_GENERATE_DOC_TRUE}" && test -z "${URI_GENERATE_DOC_FALSE}"; then
+  { { echo "$as_me:$LINENO: error: conditional \"URI_GENERATE_DOC\" was never defined.
+Usually this means the macro was only invoked conditionally." >&5
+echo "$as_me: error: conditional \"URI_GENERATE_DOC\" was never defined.
+Usually this means the macro was only invoked conditionally." >&2;}
+   { (exit 1); exit 1; }; }
+fi
 
 : ${CONFIG_STATUS=./config.status}
 ac_clean_files_save=$ac_clean_files
@@ -20189,7 +20795,7 @@
 # report actual input values of CONFIG_FILES etc. instead of their
 # values after options handling.
 ac_log="
-This file was extended by uriparser $as_me 0.6.0, which was
+This file was extended by uriparser $as_me 0.7.4, which was
 generated by GNU Autoconf 2.61.  Invocation command line was
 
   CONFIG_FILES    = $CONFIG_FILES
@@ -20242,7 +20848,7 @@
 _ACEOF
 cat >>$CONFIG_STATUS <<_ACEOF
 ac_cs_version="\\
-uriparser config.status 0.6.0
+uriparser config.status 0.7.4
 configured by $0, generated by GNU Autoconf 2.61,
   with options \\"`echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`\\"
 
@@ -20359,6 +20965,7 @@
     "test/CppTest/config.h") CONFIG_HEADERS="$CONFIG_HEADERS test/CppTest/config.h" ;;
     "depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;;
     "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;;
+    "doc/Makefile") CONFIG_FILES="$CONFIG_FILES doc/Makefile" ;;
 
   *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5
 echo "$as_me: error: invalid argument: $ac_config_target" >&2;}
@@ -20517,7 +21124,7 @@
 ECHO!$ECHO$ac_delim
 AR!$AR$ac_delim
 RANLIB!$RANLIB$ac_delim
-CPP!$CPP$ac_delim
+DSYMUTIL!$DSYMUTIL$ac_delim
 _ACEOF
 
   if test `sed -n "s/.*$ac_delim\$/X/p" conf$$subs.sed | grep -c X` = 97; then
@@ -20559,16 +21166,21 @@
 ac_delim='%!_!# '
 for ac_last_try in false false false false false :; do
   cat >conf$$subs.sed <<_ACEOF
+NMEDIT!$NMEDIT$ac_delim
+CPP!$CPP$ac_delim
 CXXCPP!$CXXCPP$ac_delim
 F77!$F77$ac_delim
 FFLAGS!$FFLAGS$ac_delim
 ac_ct_F77!$ac_ct_F77$ac_delim
 LIBTOOL!$LIBTOOL$ac_delim
+subdirs!$subdirs$ac_delim
+URI_GENERATE_DOC_TRUE!$URI_GENERATE_DOC_TRUE$ac_delim
+URI_GENERATE_DOC_FALSE!$URI_GENERATE_DOC_FALSE$ac_delim
 LIBOBJS!$LIBOBJS$ac_delim
 LTLIBOBJS!$LTLIBOBJS$ac_delim
 _ACEOF
 
-  if test `sed -n "s/.*$ac_delim\$/X/p" conf$$subs.sed | grep -c X` = 7; then
+  if test `sed -n "s/.*$ac_delim\$/X/p" conf$$subs.sed | grep -c X` = 12; then
     break
   elif $ac_last_try; then
     { { echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5
@@ -20969,21 +21581,22 @@
   fi
   rm -f "$tmp/out12"
 # Compute $ac_file's index in $config_headers.
+_am_arg=$ac_file
 _am_stamp_count=1
 for _am_header in $config_headers :; do
   case $_am_header in
-    $ac_file | $ac_file:* )
+    $_am_arg | $_am_arg:* )
       break ;;
     * )
       _am_stamp_count=`expr $_am_stamp_count + 1` ;;
   esac
 done
-echo "timestamp for $ac_file" >`$as_dirname -- $ac_file ||
-$as_expr X$ac_file : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-	 X$ac_file : 'X\(//\)[^/]' \| \
-	 X$ac_file : 'X\(//\)$' \| \
-	 X$ac_file : 'X\(/\)' \| . 2>/dev/null ||
-echo X$ac_file |
+echo "timestamp for $_am_arg" >`$as_dirname -- "$_am_arg" ||
+$as_expr X"$_am_arg" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$_am_arg" : 'X\(//\)[^/]' \| \
+	 X"$_am_arg" : 'X\(//\)$' \| \
+	 X"$_am_arg" : 'X\(/\)' \| . 2>/dev/null ||
+echo X"$_am_arg" |
     sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
 	    s//\1/
 	    q
@@ -21020,7 +21633,7 @@
   # each Makefile.in and add a new line on top of each file to say so.
   # Grep'ing the whole file is not good either: AIX grep has a line
   # limit of 2048, but all sed's we know have understand at least 4000.
-  if sed 10q "$mf" | grep '^#.*generated by automake' > /dev/null 2>&1; then
+  if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then
     dirpart=`$as_dirname -- "$mf" ||
 $as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
 	 X"$mf" : 'X\(//\)[^/]' \| \
@@ -21166,4 +21779,183 @@
   $ac_cs_success || { (exit 1); exit 1; }
 fi
 
+#
+# CONFIG_SUBDIRS section.
+#
+if test "$no_recursion" != yes; then
+
+  # Remove --cache-file and --srcdir arguments so they do not pile up.
+  ac_sub_configure_args=
+  ac_prev=
+  eval "set x $ac_configure_args"
+  shift
+  for ac_arg
+  do
+    if test -n "$ac_prev"; then
+      ac_prev=
+      continue
+    fi
+    case $ac_arg in
+    -cache-file | --cache-file | --cache-fil | --cache-fi \
+    | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
+      ac_prev=cache_file ;;
+    -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
+    | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* \
+    | --c=*)
+      ;;
+    --config-cache | -C)
+      ;;
+    -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
+      ac_prev=srcdir ;;
+    -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
+      ;;
+    -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
+      ac_prev=prefix ;;
+    -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
+      ;;
+    *)
+      case $ac_arg in
+      *\'*) ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
+      esac
+      ac_sub_configure_args="$ac_sub_configure_args '$ac_arg'" ;;
+    esac
+  done
+
+  # Always prepend --prefix to ensure using the same prefix
+  # in subdir configurations.
+  ac_arg="--prefix=$prefix"
+  case $ac_arg in
+  *\'*) ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
+  esac
+  ac_sub_configure_args="'$ac_arg' $ac_sub_configure_args"
+
+  # Pass --silent
+  if test "$silent" = yes; then
+    ac_sub_configure_args="--silent $ac_sub_configure_args"
+  fi
+
+  ac_popdir=`pwd`
+  for ac_dir in : $subdirs; do test "x$ac_dir" = x: && continue
+
+    # Do not complain, so a configure script can configure whichever
+    # parts of a large source tree are present.
+    test -d "$srcdir/$ac_dir" || continue
+
+    ac_msg="=== configuring in $ac_dir (`pwd`/$ac_dir)"
+    echo "$as_me:$LINENO: $ac_msg" >&5
+    echo "$ac_msg" >&6
+    { as_dir="$ac_dir"
+  case $as_dir in #(
+  -*) as_dir=./$as_dir;;
+  esac
+  test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || {
+    as_dirs=
+    while :; do
+      case $as_dir in #(
+      *\'*) as_qdir=`echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #(
+      *) as_qdir=$as_dir;;
+      esac
+      as_dirs="'$as_qdir' $as_dirs"
+      as_dir=`$as_dirname -- "$as_dir" ||
+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	 X"$as_dir" : 'X\(//\)[^/]' \| \
+	 X"$as_dir" : 'X\(//\)$' \| \
+	 X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
+echo X"$as_dir" |
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+      test -d "$as_dir" && break
+    done
+    test -z "$as_dirs" || eval "mkdir $as_dirs"
+  } || test -d "$as_dir" || { { echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5
+echo "$as_me: error: cannot create directory $as_dir" >&2;}
+   { (exit 1); exit 1; }; }; }
+    ac_builddir=.
+
+case "$ac_dir" in
+.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
+*)
+  ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
+  # A ".." for each directory in $ac_dir_suffix.
+  ac_top_builddir_sub=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,/..,g;s,/,,'`
+  case $ac_top_builddir_sub in
+  "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
+  *)  ac_top_build_prefix=$ac_top_builddir_sub/ ;;
+  esac ;;
+esac
+ac_abs_top_builddir=$ac_pwd
+ac_abs_builddir=$ac_pwd$ac_dir_suffix
+# for backward compatibility:
+ac_top_builddir=$ac_top_build_prefix
+
+case $srcdir in
+  .)  # We are building in place.
+    ac_srcdir=.
+    ac_top_srcdir=$ac_top_builddir_sub
+    ac_abs_top_srcdir=$ac_pwd ;;
+  [\\/]* | ?:[\\/]* )  # Absolute name.
+    ac_srcdir=$srcdir$ac_dir_suffix;
+    ac_top_srcdir=$srcdir
+    ac_abs_top_srcdir=$srcdir ;;
+  *) # Relative name.
+    ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
+    ac_top_srcdir=$ac_top_build_prefix$srcdir
+    ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
+esac
+ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
+
+
+    cd "$ac_dir"
+
+    # Check for guested configure; otherwise get Cygnus style configure.
+    if test -f "$ac_srcdir/configure.gnu"; then
+      ac_sub_configure=$ac_srcdir/configure.gnu
+    elif test -f "$ac_srcdir/configure"; then
+      ac_sub_configure=$ac_srcdir/configure
+    elif test -f "$ac_srcdir/configure.in"; then
+      # This should be Cygnus configure.
+      ac_sub_configure=$ac_aux_dir/configure
+    else
+      { echo "$as_me:$LINENO: WARNING: no configuration information is in $ac_dir" >&5
+echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2;}
+      ac_sub_configure=
+    fi
+
+    # The recursion is here.
+    if test -n "$ac_sub_configure"; then
+      # Make the cache file name correct relative to the subdirectory.
+      case $cache_file in
+      [\\/]* | ?:[\\/]* ) ac_sub_cache_file=$cache_file ;;
+      *) # Relative name.
+	ac_sub_cache_file=$ac_top_build_prefix$cache_file ;;
+      esac
+
+      { echo "$as_me:$LINENO: running $SHELL $ac_sub_configure $ac_sub_configure_args --cache-file=$ac_sub_cache_file --srcdir=$ac_srcdir" >&5
+echo "$as_me: running $SHELL $ac_sub_configure $ac_sub_configure_args --cache-file=$ac_sub_cache_file --srcdir=$ac_srcdir" >&6;}
+      # The eval makes quoting arguments work.
+      eval "\$SHELL \"\$ac_sub_configure\" $ac_sub_configure_args \
+	   --cache-file=\"\$ac_sub_cache_file\" --srcdir=\"\$ac_srcdir\"" ||
+	{ { echo "$as_me:$LINENO: error: $ac_sub_configure failed for $ac_dir" >&5
+echo "$as_me: error: $ac_sub_configure failed for $ac_dir" >&2;}
+   { (exit 1); exit 1; }; }
+    fi
+
+    cd "$ac_popdir"
+  done
+fi
 
diff -Nru /tmp/bxdedfLB6u/uriparser-0.6.0/configure.ac /tmp/fLjZ2dz9P3/uriparser-0.7.4/configure.ac
--- uriparser-0.6.0/configure.ac	1970-01-01 01:00:00.000000000 +0100
+++ uriparser-0.7.4/configure.ac	2008-12-23 02:01:21.000000000 +0000
@@ -0,0 +1,73 @@
+AC_PREREQ(2.61)
+AC_INIT([uriparser], [0.7.4])
+AC_CONFIG_AUX_DIR([build-aux])
+AM_INIT_AUTOMAKE([1.10.1 foreign dist-zip dist-bzip2 dist-lzma subdir-objects])
+AM_CONFIG_HEADER(test/CppTest/config.h)
+
+
+AC_PROG_CC
+AC_PROG_CXX
+AC_PROG_LIBTOOL
+AC_HEADER_STDC
+
+
+## Check for wprintf
+AC_MSG_CHECKING(for wprintf)
+AC_LINK_IFELSE([
+	#include <stdio.h>
+	#include <wchar.h>
+	int main() {
+	    wprintf((wchar_t *)0, 0);
+	    return 0;
+	}
+],[
+	AC_DEFINE([HAVE_WPRINTF],, [Define if your CRT provides the wprintf function.])
+	AC_MSG_RESULT(yes)
+],[
+	AC_MSG_RESULT(no)
+])
+
+
+## Option for URI_SIZEDOWN
+AC_ARG_ENABLE(sizedown, [
+Extra options:
+  --enable-sizedown       save space whereever possible (resulting in slower code)], [
+	CPPFLAGS="${CPPFLAGS} -DURI_SIZEDOWN"
+], [])
+
+
+## Checks for and from CppTest
+AC_CHECK_HEADERS(sys/time.h)
+AC_CHECK_FUNCS([gettimeofday])
+AC_MSG_CHECKING(for round)
+AC_TRY_COMPILE(
+	[ #include <math.h> ],
+	[ double d = round(1.0); ],
+	[ round=yes ],[ round=no ])
+AC_MSG_RESULT($round)
+if test "$round" = "yes"; then
+	AC_DEFINE([HAVE_ROUND],,[Defined if the function exists])
+fi
+
+
+## Local headers must come very first. Otherwise we
+## risk including headers of an already installed
+## uriparser version if its path is in CPPFLAGS
+CPPFLAGS="-I${srcdir}/include ${CPPFLAGS}"
+
+
+## API documentation
+URI_GENERATE_DOC=0
+AC_ARG_ENABLE(doc, [
+  --enable-doc            generate API documentation with Doxygen (off by default)], [
+	AC_CONFIG_SUBDIRS([doc])
+	URI_GENERATE_DOC=1
+], [])
+AM_CONDITIONAL(URI_GENERATE_DOC, test x${URI_GENERATE_DOC} = x1)
+
+
+AC_CONFIG_FILES([
+	Makefile
+	doc/Makefile
+])
+AC_OUTPUT
diff -Nru /tmp/bxdedfLB6u/uriparser-0.6.0/configure.in /tmp/fLjZ2dz9P3/uriparser-0.7.4/configure.in
--- uriparser-0.6.0/configure.in	2007-09-19 04:10:16.000000000 +0100
+++ uriparser-0.7.4/configure.in	1970-01-01 01:00:00.000000000 +0100
@@ -1,40 +0,0 @@
-AC_PREREQ(2.59)
-AC_INIT([uriparser], [0.6.0])
-AM_INIT_AUTOMAKE([1.9 foreign])
-AM_CONFIG_HEADER(test/CppTest/config.h)
-
-
-AC_PROG_CC
-AC_PROG_CXX
-AC_PROG_LIBTOOL
-AC_HEADER_STDC
-
-
-
-# URI_SIZEDOWN
-AC_ARG_ENABLE(sizedown, [
-Extra options:
-  --enable-sizedown       save space whereever possible (resulting in slower code)], [
-	CPPFLAGS="${CPPFLAGS} -DURI_SIZEDOWN"
-], [])
-
-
-
-# These are for and from CppTest
-AC_CHECK_HEADERS(sys/time.h)
-AC_CHECK_FUNCS([gettimeofday])
-AC_MSG_CHECKING(for round)
-AC_TRY_COMPILE(
-	[ #include <math.h> ],
-	[ double d = round(1.0); ],
-	[ round=yes ],[ round=no ])
-AC_MSG_RESULT($round)
-if test "$round" = "yes"; then
-	AC_DEFINE([HAVE_ROUND],,[Defined if the function exists])
-fi
-
-
-
-AC_CONFIG_FILES([Makefile])
-AC_OUTPUT
-
diff -Nru /tmp/bxdedfLB6u/uriparser-0.6.0/COPYING /tmp/fLjZ2dz9P3/uriparser-0.7.4/COPYING
--- uriparser-0.6.0/COPYING	2007-07-06 00:25:43.000000000 +0100
+++ uriparser-0.7.4/COPYING	2008-12-20 18:52:47.000000000 +0000
@@ -1,13 +1,13 @@
-uriparser - RFC 3986 URI parsing library
-
-Copyright (C) 2007, Weijia Song <songweijia@gmail.com>
-Copyright (C) 2007, Sebastian Pipping <webmaster@hartwork.org>
-All rights reserved.
-
+uriparser - RFC 3986 URI parsing library
+
+Copyright (C) 2007, Weijia Song <songweijia@gmail.com>
+Copyright (C) 2007, Sebastian Pipping <webmaster@hartwork.org>
+All rights reserved.
+
 Redistribution  and use in source and binary forms, with or without
 modification,  are permitted provided that the following conditions
-are met:
-
+are met:
+
     * Redistributions   of  source  code  must  retain  the   above
       copyright  notice, this list of conditions and the  following
       disclaimer.
@@ -21,7 +21,7 @@
       contributors  may  be  used to endorse  or  promote  products
       derived  from  this software without specific  prior  written
       permission.
-
+
 THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 "AS  IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT  NOT
 LIMITED  TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND  FITNESS
diff -Nru /tmp/bxdedfLB6u/uriparser-0.6.0/debian/changelog /tmp/fLjZ2dz9P3/uriparser-0.7.4/debian/changelog
--- uriparser-0.6.0/debian/changelog	2009-05-19 07:12:08.000000000 +0100
+++ uriparser-0.7.4/debian/changelog	2009-05-19 07:12:08.000000000 +0100
@@ -1,3 +1,42 @@
+uriparser (0.7.4-1ubuntu1~ppa1) hardy; urgency=low
+
+  * backport for hardy
+
+ -- Greek Ordono <greek.ordono@gmail.com>  Tue, 19 May 2009 05:55:03 +0000
+
+uriparser (0.7.4-1) unstable; urgency=low
+
+  * New upstream release.  closes: #493073.
+  * Add myself to Uploaders.
+  * Bump to Standards-Version 3.8.0.
+  * debian/prune-tarball.sh: also remove RFC1866.
+
+ -- Clint Adams <schizo@debian.org>  Sat, 14 Feb 2009 10:36:07 -0500
+
+uriparser (0.6.4-1) unstable; urgency=low
+
+  * New upstream release.
+  * Bump Standard-Versions to 3.7.3 (no changes needed).
+
+ -- Adeodato SimĂł <dato@net.com.org.es>  Sun, 09 Mar 2008 11:54:35 +0100
+
+uriparser (0.6.3-1) unstable; urgency=low
+
+  * New upstream release.
+
+ -- Adeodato SimĂł <dato@net.com.org.es>  Mon, 11 Feb 2008 19:48:38 +0100
+
+uriparser (0.6.1-1) unstable; urgency=low
+
+  * New upstream version. 
+
+  * Add a watch file.
+
+  * Convert debian/liburiparser1.symbols to be a dpkg-gensymbols file.
+    SymbolFile.pm blacklists arch-specific symbols, so this closes: #448959.
+
+ -- Adeodato SimĂł <dato@net.com.org.es>  Wed, 26 Dec 2007 18:42:29 +0100
+
 uriparser (0.6.0-1) unstable; urgency=low
 
   * Initial release. (Closes: #443222)
diff -Nru /tmp/bxdedfLB6u/uriparser-0.6.0/debian/control /tmp/fLjZ2dz9P3/uriparser-0.7.4/debian/control
--- uriparser-0.6.0/debian/control	2009-05-19 07:12:08.000000000 +0100
+++ uriparser-0.7.4/debian/control	2009-05-19 07:12:08.000000000 +0100
@@ -3,8 +3,8 @@
 Priority: optional
 Maintainer: Debian Xiph.org Maintainers <pkg-xiph-maint@lists.alioth.debian.org>
 Build-Depends: autotools-dev, debhelper
-Standards-Version: 3.7.2
-Uploaders: Adeodato SimĂł <dato@net.com.org.es>
+Standards-Version: 3.8.0
+Uploaders: Adeodato SimĂł <dato@net.com.org.es>, Clint Adams <schizo@debian.org>
 Homepage: http://uriparser.sourceforge.net
 XS-VCS-Bzr: http://bzr.debian.org/bzr/pkg-xiph/uriparser
 
diff -Nru /tmp/bxdedfLB6u/uriparser-0.6.0/debian/copyright /tmp/fLjZ2dz9P3/uriparser-0.7.4/debian/copyright
--- uriparser-0.6.0/debian/copyright	2009-05-19 07:12:08.000000000 +0100
+++ uriparser-0.7.4/debian/copyright	2009-05-19 07:12:08.000000000 +0100
@@ -20,8 +20,8 @@
     | Copyright (C) 2007 Weijia Song <songweijia@gmail.com>
     | Copyright (C) 2007 Sebastian Pipping <webmaster@hartwork.org>
 
-  And licensed under the terms of the BSD license. On Debian systems, the
-  full text of the BSD License is available in /usr/share/common-licenses/BSD.
+    And licensed under the terms of the BSD license. On Debian systems, the
+    full text of the BSD License is available in /usr/share/common-licenses/BSD.
 
   - The packaging scripts in the debian/ subdirectory are:
 
diff -Nru /tmp/bxdedfLB6u/uriparser-0.6.0/debian/liburiparser1.symbols /tmp/fLjZ2dz9P3/uriparser-0.7.4/debian/liburiparser1.symbols
--- uriparser-0.6.0/debian/liburiparser1.symbols	2009-05-19 07:12:08.000000000 +0100
+++ uriparser-0.7.4/debian/liburiparser1.symbols	2009-05-19 07:12:08.000000000 +0100
@@ -1,67 +1,100 @@
-_fini
-_init
-uriAddBaseUriA
-uriAddBaseUriW
-uriCopyAuthorityA
-uriCopyAuthorityW
-uriCopyPathA
-uriCopyPathW
-uriEqualsUriA
-uriEqualsUriW
-uriEscapeA
-uriEscapeExA
-uriEscapeExW
-uriEscapeW
-uriFixAmbiguityA
-uriFixAmbiguityW
-uriFreeUriMembersA
-uriFreeUriMembersW
-uriGetOctetValue
-uriHexToLetterA
-uriHexToLetterW
-uriHexdigToIntA
-uriHexdigToIntW
-uriIsHostSetA
-uriIsHostSetW
-uriIsUnreserved
-uriNormalizeSyntaxA
-uriNormalizeSyntaxExA
-uriNormalizeSyntaxExW
-uriNormalizeSyntaxMaskRequiredA
-uriNormalizeSyntaxMaskRequiredW
-uriNormalizeSyntaxW
-uriParseIpFourAddressA
-uriParseIpFourAddressW
-uriParseUriA
-uriParseUriExA
-uriParseUriExW
-uriParseUriW
-uriPushToStack
-uriRemoveBaseUriA
-uriRemoveBaseUriW
-uriRemoveDotSegmentsA
-uriRemoveDotSegmentsW
-uriResetUriA
-uriResetUriW
-uriStackToOctet
-uriToStringA
-uriToStringCharsRequiredA
-uriToStringCharsRequiredW
-uriToStringW
-uriUnescapeInPlaceA
-uriUnescapeInPlaceExA
-uriUnescapeInPlaceExW
-uriUnescapeInPlaceW
-uriUnixFilenameToUriStringA
-uriUnixFilenameToUriStringW
-uriUriStringToUnixFilenameA
-uriUriStringToUnixFilenameW
-uriUriStringToWindowsFilenameA
-uriUriStringToWindowsFilenameW
-uriWindowsFilenameToUriStringA
-uriWindowsFilenameToUriStringW
-uriWriteQuadToDoubleByte
-uri_TESTING_ONLY_ParseIpFourA
-uri_TESTING_ONLY_ParseIpFourW
-uri_TESTING_ONLY_ParseIpSixA
-uri_TESTING_ONLY_ParseIpSixW
+liburiparser.so.1 liburiparser1 #MINVER#
+ uriAddBaseUriA@Base 0.6.0
+ uriAddBaseUriW@Base 0.6.0
+ uriComposeQueryA@Base 0.7.2
+ uriComposeQueryCharsRequiredA@Base 0.7.2
+ uriComposeQueryCharsRequiredExA@Base 0.7.2
+ uriComposeQueryCharsRequiredExW@Base 0.7.2
+ uriComposeQueryCharsRequiredW@Base 0.7.2
+ uriComposeQueryExA@Base 0.7.2
+ uriComposeQueryExW@Base 0.7.2
+ uriComposeQueryMallocA@Base 0.7.2
+ uriComposeQueryMallocExA@Base 0.7.2
+ uriComposeQueryMallocExW@Base 0.7.2
+ uriComposeQueryMallocW@Base 0.7.2
+ uriComposeQueryW@Base 0.7.2
+ uriConstParentA@Base 0.6.0
+ uriConstParentW@Base 0.6.0
+ uriConstPwdA@Base 0.6.0
+ uriConstPwdW@Base 0.6.0
+ uriCopyAuthorityA@Base 0.6.0
+ uriCopyAuthorityW@Base 0.6.0
+ uriCopyPathA@Base 0.6.0
+ uriCopyPathW@Base 0.6.0
+ uriDissectQueryMallocA@Base 0.7.2
+ uriDissectQueryMallocExA@Base 0.7.2
+ uriDissectQueryMallocExW@Base 0.7.2
+ uriDissectQueryMallocW@Base 0.7.2
+ uriEqualsUriA@Base 0.6.0
+ uriEqualsUriW@Base 0.6.0
+ uriEscapeA@Base 0.6.0
+ uriEscapeExA@Base 0.6.0
+ uriEscapeExW@Base 0.6.0
+ uriEscapeW@Base 0.6.0
+ uriFixAmbiguityA@Base 0.6.0
+ uriFixAmbiguityW@Base 0.6.0
+ uriFixEmptyTrailSegmentA@Base 0.7.2
+ uriFixEmptyTrailSegmentW@Base 0.7.2
+ uriFreeQueryListA@Base 0.7.2
+ uriFreeQueryListW@Base 0.7.2
+ uriFreeUriMembersA@Base 0.6.0
+ uriFreeUriMembersW@Base 0.6.0
+ uriGetOctetValue@Base 0.6.0
+ uriHexToLetterA@Base 0.6.0
+ uriHexToLetterExA@Base 0.7.4
+ uriHexToLetterExW@Base 0.7.4
+ uriHexToLetterW@Base 0.6.0
+ uriHexdigToIntA@Base 0.6.0
+ uriHexdigToIntW@Base 0.6.0
+ uriIsHostSetA@Base 0.6.0
+ uriIsHostSetW@Base 0.6.0
+ uriIsUnreserved@Base 0.6.0
+ uriNormalizeSyntaxA@Base 0.6.0
+ uriNormalizeSyntaxExA@Base 0.6.0
+ uriNormalizeSyntaxExW@Base 0.6.0
+ uriNormalizeSyntaxMaskRequiredA@Base 0.6.0
+ uriNormalizeSyntaxMaskRequiredW@Base 0.6.0
+ uriNormalizeSyntaxW@Base 0.6.0
+ uriParseIpFourAddressA@Base 0.6.0
+ uriParseIpFourAddressW@Base 0.6.0
+ uriParseUriA@Base 0.6.0
+ uriParseUriExA@Base 0.6.0
+ uriParseUriExW@Base 0.6.0
+ uriParseUriW@Base 0.6.0
+ uriPushToStack@Base 0.6.0
+ uriRemoveBaseUriA@Base 0.6.0
+ uriRemoveBaseUriImplA@Base 0.7.2
+ uriRemoveBaseUriImplW@Base 0.7.2
+ uriRemoveBaseUriW@Base 0.6.0
+ uriRemoveDotSegmentsA@Base 0.6.0
+ uriRemoveDotSegmentsAbsoluteA@Base 0.6.4
+ uriRemoveDotSegmentsAbsoluteW@Base 0.6.4
+ uriRemoveDotSegmentsExA@Base 0.7.4
+ uriRemoveDotSegmentsExW@Base 0.7.4
+ uriRemoveDotSegmentsW@Base 0.6.0
+ uriResetUriA@Base 0.6.0
+ uriResetUriW@Base 0.6.0
+ uriSafeToPointToA@Base 0.6.0
+ uriSafeToPointToW@Base 0.6.0
+ uriStackToOctet@Base 0.6.0
+ uriToStringA@Base 0.6.0
+ uriToStringCharsRequiredA@Base 0.6.0
+ uriToStringCharsRequiredW@Base 0.6.0
+ uriToStringW@Base 0.6.0
+ uriUnescapeInPlaceA@Base 0.6.0
+ uriUnescapeInPlaceExA@Base 0.6.0
+ uriUnescapeInPlaceExW@Base 0.6.0
+ uriUnescapeInPlaceW@Base 0.6.0
+ uriUnixFilenameToUriStringA@Base 0.6.0
+ uriUnixFilenameToUriStringW@Base 0.6.0
+ uriUriStringToUnixFilenameA@Base 0.6.0
+ uriUriStringToUnixFilenameW@Base 0.6.0
+ uriUriStringToWindowsFilenameA@Base 0.6.0
+ uriUriStringToWindowsFilenameW@Base 0.6.0
+ uriWindowsFilenameToUriStringA@Base 0.6.0
+ uriWindowsFilenameToUriStringW@Base 0.6.0
+ uriWriteQuadToDoubleByte@Base 0.6.0
+ uri_TESTING_ONLY_ParseIpFourA@Base 0.6.0
+ uri_TESTING_ONLY_ParseIpFourW@Base 0.6.0
+ uri_TESTING_ONLY_ParseIpSixA@Base 0.6.0
+ uri_TESTING_ONLY_ParseIpSixW@Base 0.6.0
diff -Nru /tmp/bxdedfLB6u/uriparser-0.6.0/debian/prune-tarball.sh /tmp/fLjZ2dz9P3/uriparser-0.7.4/debian/prune-tarball.sh
--- uriparser-0.6.0/debian/prune-tarball.sh	2009-05-19 07:12:08.000000000 +0100
+++ uriparser-0.7.4/debian/prune-tarball.sh	2009-05-19 07:12:08.000000000 +0100
@@ -12,7 +12,7 @@
 trap "rm -rf $TMP_DIR" 0
 
 tar xCf "$TMP_DIR" "$1"
-rm "$TMP_DIR"/*/doc/rfc{3986,3513}.htm
+rm "$TMP_DIR"/*/doc/rfc{3986,3513,1866}.htm
 rm "$TMP_DIR"/*/doc/rfc3986_grammar_only.txt
 
 (
diff -Nru /tmp/bxdedfLB6u/uriparser-0.6.0/debian/rules /tmp/fLjZ2dz9P3/uriparser-0.7.4/debian/rules
--- uriparser-0.6.0/debian/rules	2009-05-19 07:12:08.000000000 +0100
+++ uriparser-0.7.4/debian/rules	2009-05-19 07:12:08.000000000 +0100
@@ -80,7 +80,6 @@
 	dh_installdirs
 	cd $(objdir) && $(MAKE) install DESTDIR=$(CURDIR)/debian/tmp
 	dh_install --list-missing
-	nm -D $(CURDIR)/debian/tmp/usr/lib/liburiparser.so.1 | awk '/ T / {print $$3}' | env LC_ALL=C sort | diff $(CURDIR)/debian/liburiparser1.symbols -
 	touch $@ 
 
 #
@@ -99,7 +98,7 @@
 	dh_strip
 	dh_compress
 	dh_fixperms
-	dh_makeshlibs -V 'liburiparser1'
+	dh_makeshlibs -V -- -c4
 	dh_installdeb
 	dh_shlibdeps
 	dh_gencontrol
diff -Nru /tmp/bxdedfLB6u/uriparser-0.6.0/debian/watch /tmp/fLjZ2dz9P3/uriparser-0.7.4/debian/watch
--- uriparser-0.6.0/debian/watch	1970-01-01 01:00:00.000000000 +0100
+++ uriparser-0.7.4/debian/watch	2009-05-19 07:12:08.000000000 +0100
@@ -0,0 +1,2 @@
+version=3
+http://sf.net/uriparser/uriparser-(.*)\.tar.gz
diff -Nru /tmp/bxdedfLB6u/uriparser-0.6.0/depcomp /tmp/fLjZ2dz9P3/uriparser-0.7.4/depcomp
--- uriparser-0.6.0/depcomp	2007-07-06 00:26:55.000000000 +0100
+++ uriparser-0.7.4/depcomp	1970-01-01 01:00:00.000000000 +0100
@@ -1,584 +0,0 @@
-#! /bin/sh
-# depcomp - compile a program generating dependencies as side-effects
-
-scriptversion=2006-10-15.18
-
-# Copyright (C) 1999, 2000, 2003, 2004, 2005, 2006 Free Software
-# Foundation, Inc.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
-# 02110-1301, USA.
-
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-# Originally written by Alexandre Oliva <oliva@dcc.unicamp.br>.
-
-case $1 in
-  '')
-     echo "$0: No command.  Try \`$0 --help' for more information." 1>&2
-     exit 1;
-     ;;
-  -h | --h*)
-    cat <<\EOF
-Usage: depcomp [--help] [--version] PROGRAM [ARGS]
-
-Run PROGRAMS ARGS to compile a file, generating dependencies
-as side-effects.
-
-Environment variables:
-  depmode     Dependency tracking mode.
-  source      Source file read by `PROGRAMS ARGS'.
-  object      Object file output by `PROGRAMS ARGS'.
-  DEPDIR      directory where to store dependencies.
-  depfile     Dependency file to output.
-  tmpdepfile  Temporary file to use when outputing dependencies.
-  libtool     Whether libtool is used (yes/no).
-
-Report bugs to <bug-automake@gnu.org>.
-EOF
-    exit $?
-    ;;
-  -v | --v*)
-    echo "depcomp $scriptversion"
-    exit $?
-    ;;
-esac
-
-if test -z "$depmode" || test -z "$source" || test -z "$object"; then
-  echo "depcomp: Variables source, object and depmode must be set" 1>&2
-  exit 1
-fi
-
-# Dependencies for sub/bar.o or sub/bar.obj go into sub/.deps/bar.Po.
-depfile=${depfile-`echo "$object" |
-  sed 's|[^\\/]*$|'${DEPDIR-.deps}'/&|;s|\.\([^.]*\)$|.P\1|;s|Pobj$|Po|'`}
-tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`}
-
-rm -f "$tmpdepfile"
-
-# Some modes work just like other modes, but use different flags.  We
-# parameterize here, but still list the modes in the big case below,
-# to make depend.m4 easier to write.  Note that we *cannot* use a case
-# here, because this file can only contain one case statement.
-if test "$depmode" = hp; then
-  # HP compiler uses -M and no extra arg.
-  gccflag=-M
-  depmode=gcc
-fi
-
-if test "$depmode" = dashXmstdout; then
-   # This is just like dashmstdout with a different argument.
-   dashmflag=-xM
-   depmode=dashmstdout
-fi
-
-case "$depmode" in
-gcc3)
-## gcc 3 implements dependency tracking that does exactly what
-## we want.  Yay!  Note: for some reason libtool 1.4 doesn't like
-## it if -MD -MP comes after the -MF stuff.  Hmm.
-## Unfortunately, FreeBSD c89 acceptance of flags depends upon
-## the command line argument order; so add the flags where they
-## appear in depend2.am.  Note that the slowdown incurred here
-## affects only configure: in makefiles, %FASTDEP% shortcuts this.
-  for arg
-  do
-    case $arg in
-    -c) set fnord "$@" -MT "$object" -MD -MP -MF "$tmpdepfile" "$arg" ;;
-    *)  set fnord "$@" "$arg" ;;
-    esac
-    shift # fnord
-    shift # $arg
-  done
-  "$@"
-  stat=$?
-  if test $stat -eq 0; then :
-  else
-    rm -f "$tmpdepfile"
-    exit $stat
-  fi
-  mv "$tmpdepfile" "$depfile"
-  ;;
-
-gcc)
-## There are various ways to get dependency output from gcc.  Here's
-## why we pick this rather obscure method:
-## - Don't want to use -MD because we'd like the dependencies to end
-##   up in a subdir.  Having to rename by hand is ugly.
-##   (We might end up doing this anyway to support other compilers.)
-## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like
-##   -MM, not -M (despite what the docs say).
-## - Using -M directly means running the compiler twice (even worse
-##   than renaming).
-  if test -z "$gccflag"; then
-    gccflag=-MD,
-  fi
-  "$@" -Wp,"$gccflag$tmpdepfile"
-  stat=$?
-  if test $stat -eq 0; then :
-  else
-    rm -f "$tmpdepfile"
-    exit $stat
-  fi
-  rm -f "$depfile"
-  echo "$object : \\" > "$depfile"
-  alpha=ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz
-## The second -e expression handles DOS-style file names with drive letters.
-  sed -e 's/^[^:]*: / /' \
-      -e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile"
-## This next piece of magic avoids the `deleted header file' problem.
-## The problem is that when a header file which appears in a .P file
-## is deleted, the dependency causes make to die (because there is
-## typically no way to rebuild the header).  We avoid this by adding
-## dummy dependencies for each header file.  Too bad gcc doesn't do
-## this for us directly.
-  tr ' ' '
-' < "$tmpdepfile" |
-## Some versions of gcc put a space before the `:'.  On the theory
-## that the space means something, we add a space to the output as
-## well.
-## Some versions of the HPUX 10.20 sed can't process this invocation
-## correctly.  Breaking it into two sed invocations is a workaround.
-    sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
-  rm -f "$tmpdepfile"
-  ;;
-
-hp)
-  # This case exists only to let depend.m4 do its work.  It works by
-  # looking at the text of this script.  This case will never be run,
-  # since it is checked for above.
-  exit 1
-  ;;
-
-sgi)
-  if test "$libtool" = yes; then
-    "$@" "-Wp,-MDupdate,$tmpdepfile"
-  else
-    "$@" -MDupdate "$tmpdepfile"
-  fi
-  stat=$?
-  if test $stat -eq 0; then :
-  else
-    rm -f "$tmpdepfile"
-    exit $stat
-  fi
-  rm -f "$depfile"
-
-  if test -f "$tmpdepfile"; then  # yes, the sourcefile depend on other files
-    echo "$object : \\" > "$depfile"
-
-    # Clip off the initial element (the dependent).  Don't try to be
-    # clever and replace this with sed code, as IRIX sed won't handle
-    # lines with more than a fixed number of characters (4096 in
-    # IRIX 6.2 sed, 8192 in IRIX 6.5).  We also remove comment lines;
-    # the IRIX cc adds comments like `#:fec' to the end of the
-    # dependency line.
-    tr ' ' '
-' < "$tmpdepfile" \
-    | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' | \
-    tr '
-' ' ' >> $depfile
-    echo >> $depfile
-
-    # The second pass generates a dummy entry for each header file.
-    tr ' ' '
-' < "$tmpdepfile" \
-   | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \
-   >> $depfile
-  else
-    # The sourcefile does not contain any dependencies, so just
-    # store a dummy comment line, to avoid errors with the Makefile
-    # "include basename.Plo" scheme.
-    echo "#dummy" > "$depfile"
-  fi
-  rm -f "$tmpdepfile"
-  ;;
-
-aix)
-  # The C for AIX Compiler uses -M and outputs the dependencies
-  # in a .u file.  In older versions, this file always lives in the
-  # current directory.  Also, the AIX compiler puts `$object:' at the
-  # start of each line; $object doesn't have directory information.
-  # Version 6 uses the directory in both cases.
-  stripped=`echo "$object" | sed 's/\(.*\)\..*$/\1/'`
-  tmpdepfile="$stripped.u"
-  if test "$libtool" = yes; then
-    "$@" -Wc,-M
-  else
-    "$@" -M
-  fi
-  stat=$?
-
-  if test -f "$tmpdepfile"; then :
-  else
-    stripped=`echo "$stripped" | sed 's,^.*/,,'`
-    tmpdepfile="$stripped.u"
-  fi
-
-  if test $stat -eq 0; then :
-  else
-    rm -f "$tmpdepfile"
-    exit $stat
-  fi
-
-  if test -f "$tmpdepfile"; then
-    outname="$stripped.o"
-    # Each line is of the form `foo.o: dependent.h'.
-    # Do two passes, one to just change these to
-    # `$object: dependent.h' and one to simply `dependent.h:'.
-    sed -e "s,^$outname:,$object :," < "$tmpdepfile" > "$depfile"
-    sed -e "s,^$outname: \(.*\)$,\1:," < "$tmpdepfile" >> "$depfile"
-  else
-    # The sourcefile does not contain any dependencies, so just
-    # store a dummy comment line, to avoid errors with the Makefile
-    # "include basename.Plo" scheme.
-    echo "#dummy" > "$depfile"
-  fi
-  rm -f "$tmpdepfile"
-  ;;
-
-icc)
-  # Intel's C compiler understands `-MD -MF file'.  However on
-  #    icc -MD -MF foo.d -c -o sub/foo.o sub/foo.c
-  # ICC 7.0 will fill foo.d with something like
-  #    foo.o: sub/foo.c
-  #    foo.o: sub/foo.h
-  # which is wrong.  We want:
-  #    sub/foo.o: sub/foo.c
-  #    sub/foo.o: sub/foo.h
-  #    sub/foo.c:
-  #    sub/foo.h:
-  # ICC 7.1 will output
-  #    foo.o: sub/foo.c sub/foo.h
-  # and will wrap long lines using \ :
-  #    foo.o: sub/foo.c ... \
-  #     sub/foo.h ... \
-  #     ...
-
-  "$@" -MD -MF "$tmpdepfile"
-  stat=$?
-  if test $stat -eq 0; then :
-  else
-    rm -f "$tmpdepfile"
-    exit $stat
-  fi
-  rm -f "$depfile"
-  # Each line is of the form `foo.o: dependent.h',
-  # or `foo.o: dep1.h dep2.h \', or ` dep3.h dep4.h \'.
-  # Do two passes, one to just change these to
-  # `$object: dependent.h' and one to simply `dependent.h:'.
-  sed "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile"
-  # Some versions of the HPUX 10.20 sed can't process this invocation
-  # correctly.  Breaking it into two sed invocations is a workaround.
-  sed 's,^[^:]*: \(.*\)$,\1,;s/^\\$//;/^$/d;/:$/d' < "$tmpdepfile" |
-    sed -e 's/$/ :/' >> "$depfile"
-  rm -f "$tmpdepfile"
-  ;;
-
-hp2)
-  # The "hp" stanza above does not work with aCC (C++) and HP's ia64
-  # compilers, which have integrated preprocessors.  The correct option
-  # to use with these is +Maked; it writes dependencies to a file named
-  # 'foo.d', which lands next to the object file, wherever that
-  # happens to be.
-  # Much of this is similar to the tru64 case; see comments there.
-  dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
-  test "x$dir" = "x$object" && dir=
-  base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
-  if test "$libtool" = yes; then
-    tmpdepfile1=$dir$base.d
-    tmpdepfile2=$dir.libs/$base.d
-    "$@" -Wc,+Maked
-  else
-    tmpdepfile1=$dir$base.d
-    tmpdepfile2=$dir$base.d
-    "$@" +Maked
-  fi
-  stat=$?
-  if test $stat -eq 0; then :
-  else
-     rm -f "$tmpdepfile1" "$tmpdepfile2"
-     exit $stat
-  fi
-
-  for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2"
-  do
-    test -f "$tmpdepfile" && break
-  done
-  if test -f "$tmpdepfile"; then
-    sed -e "s,^.*\.[a-z]*:,$object:," "$tmpdepfile" > "$depfile"
-    # Add `dependent.h:' lines.
-    sed -ne '2,${; s/^ *//; s/ \\*$//; s/$/:/; p;}' "$tmpdepfile" >> "$depfile"
-  else
-    echo "#dummy" > "$depfile"
-  fi
-  rm -f "$tmpdepfile" "$tmpdepfile2"
-  ;;
-
-tru64)
-   # The Tru64 compiler uses -MD to generate dependencies as a side
-   # effect.  `cc -MD -o foo.o ...' puts the dependencies into `foo.o.d'.
-   # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put
-   # dependencies in `foo.d' instead, so we check for that too.
-   # Subdirectories are respected.
-   dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
-   test "x$dir" = "x$object" && dir=
-   base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
-
-   if test "$libtool" = yes; then
-      # With Tru64 cc, shared objects can also be used to make a
-      # static library.  This mechanism is used in libtool 1.4 series to
-      # handle both shared and static libraries in a single compilation.
-      # With libtool 1.4, dependencies were output in $dir.libs/$base.lo.d.
-      #
-      # With libtool 1.5 this exception was removed, and libtool now
-      # generates 2 separate objects for the 2 libraries.  These two
-      # compilations output dependencies in $dir.libs/$base.o.d and
-      # in $dir$base.o.d.  We have to check for both files, because
-      # one of the two compilations can be disabled.  We should prefer
-      # $dir$base.o.d over $dir.libs/$base.o.d because the latter is
-      # automatically cleaned when .libs/ is deleted, while ignoring
-      # the former would cause a distcleancheck panic.
-      tmpdepfile1=$dir.libs/$base.lo.d   # libtool 1.4
-      tmpdepfile2=$dir$base.o.d          # libtool 1.5
-      tmpdepfile3=$dir.libs/$base.o.d    # libtool 1.5
-      tmpdepfile4=$dir.libs/$base.d      # Compaq CCC V6.2-504
-      "$@" -Wc,-MD
-   else
-      tmpdepfile1=$dir$base.o.d
-      tmpdepfile2=$dir$base.d
-      tmpdepfile3=$dir$base.d
-      tmpdepfile4=$dir$base.d
-      "$@" -MD
-   fi
-
-   stat=$?
-   if test $stat -eq 0; then :
-   else
-      rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4"
-      exit $stat
-   fi
-
-   for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4"
-   do
-     test -f "$tmpdepfile" && break
-   done
-   if test -f "$tmpdepfile"; then
-      sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile"
-      # That's a tab and a space in the [].
-      sed -e 's,^.*\.[a-z]*:[	 ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile"
-   else
-      echo "#dummy" > "$depfile"
-   fi
-   rm -f "$tmpdepfile"
-   ;;
-
-#nosideeffect)
-  # This comment above is used by automake to tell side-effect
-  # dependency tracking mechanisms from slower ones.
-
-dashmstdout)
-  # Important note: in order to support this mode, a compiler *must*
-  # always write the preprocessed file to stdout, regardless of -o.
-  "$@" || exit $?
-
-  # Remove the call to Libtool.
-  if test "$libtool" = yes; then
-    while test $1 != '--mode=compile'; do
-      shift
-    done
-    shift
-  fi
-
-  # Remove `-o $object'.
-  IFS=" "
-  for arg
-  do
-    case $arg in
-    -o)
-      shift
-      ;;
-    $object)
-      shift
-      ;;
-    *)
-      set fnord "$@" "$arg"
-      shift # fnord
-      shift # $arg
-      ;;
-    esac
-  done
-
-  test -z "$dashmflag" && dashmflag=-M
-  # Require at least two characters before searching for `:'
-  # in the target name.  This is to cope with DOS-style filenames:
-  # a dependency such as `c:/foo/bar' could be seen as target `c' otherwise.
-  "$@" $dashmflag |
-    sed 's:^[  ]*[^: ][^:][^:]*\:[    ]*:'"$object"'\: :' > "$tmpdepfile"
-  rm -f "$depfile"
-  cat < "$tmpdepfile" > "$depfile"
-  tr ' ' '
-' < "$tmpdepfile" | \
-## Some versions of the HPUX 10.20 sed can't process this invocation
-## correctly.  Breaking it into two sed invocations is a workaround.
-    sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
-  rm -f "$tmpdepfile"
-  ;;
-
-dashXmstdout)
-  # This case only exists to satisfy depend.m4.  It is never actually
-  # run, as this mode is specially recognized in the preamble.
-  exit 1
-  ;;
-
-makedepend)
-  "$@" || exit $?
-  # Remove any Libtool call
-  if test "$libtool" = yes; then
-    while test $1 != '--mode=compile'; do
-      shift
-    done
-    shift
-  fi
-  # X makedepend
-  shift
-  cleared=no
-  for arg in "$@"; do
-    case $cleared in
-    no)
-      set ""; shift
-      cleared=yes ;;
-    esac
-    case "$arg" in
-    -D*|-I*)
-      set fnord "$@" "$arg"; shift ;;
-    # Strip any option that makedepend may not understand.  Remove
-    # the object too, otherwise makedepend will parse it as a source file.
-    -*|$object)
-      ;;
-    *)
-      set fnord "$@" "$arg"; shift ;;
-    esac
-  done
-  obj_suffix="`echo $object | sed 's/^.*\././'`"
-  touch "$tmpdepfile"
-  ${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@"
-  rm -f "$depfile"
-  cat < "$tmpdepfile" > "$depfile"
-  sed '1,2d' "$tmpdepfile" | tr ' ' '
-' | \
-## Some versions of the HPUX 10.20 sed can't process this invocation
-## correctly.  Breaking it into two sed invocations is a workaround.
-    sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
-  rm -f "$tmpdepfile" "$tmpdepfile".bak
-  ;;
-
-cpp)
-  # Important note: in order to support this mode, a compiler *must*
-  # always write the preprocessed file to stdout.
-  "$@" || exit $?
-
-  # Remove the call to Libtool.
-  if test "$libtool" = yes; then
-    while test $1 != '--mode=compile'; do
-      shift
-    done
-    shift
-  fi
-
-  # Remove `-o $object'.
-  IFS=" "
-  for arg
-  do
-    case $arg in
-    -o)
-      shift
-      ;;
-    $object)
-      shift
-      ;;
-    *)
-      set fnord "$@" "$arg"
-      shift # fnord
-      shift # $arg
-      ;;
-    esac
-  done
-
-  "$@" -E |
-    sed -n -e '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \
-       -e '/^#line [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' |
-    sed '$ s: \\$::' > "$tmpdepfile"
-  rm -f "$depfile"
-  echo "$object : \\" > "$depfile"
-  cat < "$tmpdepfile" >> "$depfile"
-  sed < "$tmpdepfile" '/^$/d;s/^ //;s/ \\$//;s/$/ :/' >> "$depfile"
-  rm -f "$tmpdepfile"
-  ;;
-
-msvisualcpp)
-  # Important note: in order to support this mode, a compiler *must*
-  # always write the preprocessed file to stdout, regardless of -o,
-  # because we must use -o when running libtool.
-  "$@" || exit $?
-  IFS=" "
-  for arg
-  do
-    case "$arg" in
-    "-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI")
-	set fnord "$@"
-	shift
-	shift
-	;;
-    *)
-	set fnord "$@" "$arg"
-	shift
-	shift
-	;;
-    esac
-  done
-  "$@" -E |
-  sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::echo "`cygpath -u \\"\1\\"`":p' | sort | uniq > "$tmpdepfile"
-  rm -f "$depfile"
-  echo "$object : \\" > "$depfile"
-  . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s::	\1 \\:p' >> "$depfile"
-  echo "	" >> "$depfile"
-  . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s::\1\::p' >> "$depfile"
-  rm -f "$tmpdepfile"
-  ;;
-
-none)
-  exec "$@"
-  ;;
-
-*)
-  echo "Unknown depmode $depmode" 1>&2
-  exit 1
-  ;;
-esac
-
-exit 0
-
-# Local Variables:
-# mode: shell-script
-# sh-indentation: 2
-# eval: (add-hook 'write-file-hooks 'time-stamp)
-# time-stamp-start: "scriptversion="
-# time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-end: "$"
-# End:
diff -Nru /tmp/bxdedfLB6u/uriparser-0.6.0/doc/aclocal.m4 /tmp/fLjZ2dz9P3/uriparser-0.7.4/doc/aclocal.m4
--- uriparser-0.6.0/doc/aclocal.m4	2007-07-28 17:55:44.000000000 +0100
+++ uriparser-0.7.4/doc/aclocal.m4	2008-12-23 02:31:15.000000000 +0000
@@ -1,7 +1,7 @@
-# generated automatically by aclocal 1.10 -*- Autoconf -*-
+# generated automatically by aclocal 1.10.1 -*- Autoconf -*-
 
 # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
-# 2005, 2006  Free Software Foundation, Inc.
+# 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -11,12 +11,15 @@
 # even the implied warranty of MERCHANTABILITY or FITNESS FOR A
 # PARTICULAR PURPOSE.
 
-m4_if(m4_PACKAGE_VERSION, [2.61],,
-[m4_fatal([this file was generated for autoconf 2.61.
-You have another version of autoconf.  If you want to use that,
-you should regenerate the build system entirely.], [63])])
+m4_ifndef([AC_AUTOCONF_VERSION],
+  [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
+m4_if(AC_AUTOCONF_VERSION, [2.61],,
+[m4_warning([this file was generated for autoconf 2.61.
+You have another version of autoconf.  It may work, but is not guaranteed to.
+If you have problems, you may need to regenerate the build system entirely.
+To do so, use the procedure documented by the package, typically `autoreconf'.])])
 
-# Copyright (C) 2002, 2003, 2005, 2006  Free Software Foundation, Inc.
+# Copyright (C) 2002, 2003, 2005, 2006, 2007  Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
@@ -31,7 +34,7 @@
 [am__api_version='1.10'
 dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to
 dnl require some minimum version.  Point them to the right macro.
-m4_if([$1], [1.10], [],
+m4_if([$1], [1.10.1], [],
       [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl
 ])
 
@@ -47,8 +50,10 @@
 # Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced.
 # This function is AC_REQUIREd by AC_INIT_AUTOMAKE.
 AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],
-[AM_AUTOMAKE_VERSION([1.10])dnl
-_AM_AUTOCONF_VERSION(m4_PACKAGE_VERSION)])
+[AM_AUTOMAKE_VERSION([1.10.1])dnl
+m4_ifndef([AC_AUTOCONF_VERSION],
+  [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
+_AM_AUTOCONF_VERSION(AC_AUTOCONF_VERSION)])
 
 # AM_AUX_DIR_EXPAND                                         -*- Autoconf -*-
 
@@ -106,13 +111,13 @@
 # Do all the work for Automake.                             -*- Autoconf -*-
 
 # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
-# 2005, 2006 Free Software Foundation, Inc.
+# 2005, 2006, 2008 Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
 
-# serial 12
+# serial 13
 
 # This macro actually does too much.  Some checks are only needed if
 # your package does certain things.  But this isn't really a big deal.
@@ -217,16 +222,17 @@
 # our stamp files there.
 AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK],
 [# Compute $1's index in $config_headers.
+_am_arg=$1
 _am_stamp_count=1
 for _am_header in $config_headers :; do
   case $_am_header in
-    $1 | $1:* )
+    $_am_arg | $_am_arg:* )
       break ;;
     * )
       _am_stamp_count=`expr $_am_stamp_count + 1` ;;
   esac
 done
-echo "timestamp for $1" >`AS_DIRNAME([$1])`/stamp-h[]$_am_stamp_count])
+echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count])
 
 # Copyright (C) 2001, 2003, 2005  Free Software Foundation, Inc.
 #
@@ -446,7 +452,7 @@
 
 # _AM_SUBST_NOTMAKE(VARIABLE)
 # ---------------------------
-# Prevent Automake from outputing VARIABLE = @VARIABLE@ in Makefile.in.
+# Prevent Automake from outputting VARIABLE = @VARIABLE@ in Makefile.in.
 # This macro is traced by Automake.
 AC_DEFUN([_AM_SUBST_NOTMAKE])
 
diff -Nru /tmp/bxdedfLB6u/uriparser-0.6.0/doc/configure /tmp/fLjZ2dz9P3/uriparser-0.7.4/doc/configure
--- uriparser-0.6.0/doc/configure	2007-07-28 17:55:46.000000000 +0100
+++ uriparser-0.7.4/doc/configure	2008-12-23 02:31:15.000000000 +0000
@@ -576,7 +576,7 @@
 PACKAGE_STRING=
 PACKAGE_BUGREPORT=
 
-ac_unique_file="Doxyfile"
+ac_unique_file="Doxyfile.in"
 ac_subst_vars='SHELL
 PATH_SEPARATOR
 PACKAGE_NAME
@@ -638,6 +638,8 @@
 am__untar
 DOXY_CHECK
 GRAPHVIZ_CHECK
+GENERATE_HTMLHELP
+QHG_LOCATION
 LIBOBJS
 LTLIBOBJS'
 ac_subst_files=''
@@ -1633,10 +1635,8 @@
 ac_compiler_gnu=$ac_cv_c_compiler_gnu
 
 
-am__api_version='1.10'
-
 ac_aux_dir=
-for ac_dir in "$srcdir" "$srcdir/.." "$srcdir/../.."; do
+for ac_dir in ../build-aux "$srcdir"/../build-aux; do
   if test -f "$ac_dir/install-sh"; then
     ac_aux_dir=$ac_dir
     ac_install_sh="$ac_aux_dir/install-sh -c"
@@ -1652,8 +1652,8 @@
   fi
 done
 if test -z "$ac_aux_dir"; then
-  { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" >&5
-echo "$as_me: error: cannot find install-sh or install.sh in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" >&2;}
+  { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in ../build-aux \"$srcdir\"/../build-aux" >&5
+echo "$as_me: error: cannot find install-sh or install.sh in ../build-aux \"$srcdir\"/../build-aux" >&2;}
    { (exit 1); exit 1; }; }
 fi
 
@@ -1666,6 +1666,8 @@
 ac_configure="$SHELL $ac_aux_dir/configure"  # Please don't use this var.
 
 
+am__api_version='1.10'
+
 # Find a good install program.  We prefer a C program (faster),
 # so one script is as good as another.  But avoid the broken or
 # incompatible versions:
@@ -1969,8 +1971,8 @@
 
 
 # Define the identity of the package.
- PACKAGE=uriparser
- VERSION=0.5.0-doc
+ PACKAGE=uriparser-doc
+ VERSION=0.7.4
 
 
 cat >>confdefs.h <<_ACEOF
@@ -2210,7 +2212,22 @@
 fi
 
 
-ac_config_files="$ac_config_files Makefile"
+## HTML help, Qt Compressed Help
+host_triplet=`${ac_config_guess}`
+if echo "${host_triplet}" | grep cygwin &>/dev/null ; then
+	GENERATE_HTMLHELP=YES
+	QHG_LOCATION=../qhelpgenerator.exe
+else
+	GENERATE_HTMLHELP=NO
+	QHG_LOCATION=qhelpgenerator
+fi
+
+
+
+
+ac_config_files="$ac_config_files Doxyfile Makefile"
+
+ac_config_files="$ac_config_files release.sh"
 
 cat >confcache <<\_ACEOF
 # This file is a shell script that caches the results of configure
@@ -2781,7 +2798,9 @@
 for ac_config_target in $ac_config_targets
 do
   case $ac_config_target in
+    "Doxyfile") CONFIG_FILES="$CONFIG_FILES Doxyfile" ;;
     "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;;
+    "release.sh") CONFIG_FILES="$CONFIG_FILES release.sh" ;;
 
   *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5
 echo "$as_me: error: invalid argument: $ac_config_target" >&2;}
@@ -2903,11 +2922,13 @@
 am__untar!$am__untar$ac_delim
 DOXY_CHECK!$DOXY_CHECK$ac_delim
 GRAPHVIZ_CHECK!$GRAPHVIZ_CHECK$ac_delim
+GENERATE_HTMLHELP!$GENERATE_HTMLHELP$ac_delim
+QHG_LOCATION!$QHG_LOCATION$ac_delim
 LIBOBJS!$LIBOBJS$ac_delim
 LTLIBOBJS!$LTLIBOBJS$ac_delim
 _ACEOF
 
-  if test `sed -n "s/.*$ac_delim\$/X/p" conf$$subs.sed | grep -c X` = 63; then
+  if test `sed -n "s/.*$ac_delim\$/X/p" conf$$subs.sed | grep -c X` = 65; then
     break
   elif $ac_last_try; then
     { { echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5
@@ -3215,6 +3236,11 @@
 
   esac
 
+
+  case $ac_file$ac_mode in
+    "release.sh":F) chmod a+x release.sh ;;
+
+  esac
 done # for ac_tag
 
 
diff -Nru /tmp/bxdedfLB6u/uriparser-0.6.0/doc/configure.ac /tmp/fLjZ2dz9P3/uriparser-0.7.4/doc/configure.ac
--- uriparser-0.6.0/doc/configure.ac	1970-01-01 01:00:00.000000000 +0100
+++ uriparser-0.7.4/doc/configure.ac	2008-12-23 02:10:40.000000000 +0000
@@ -0,0 +1,40 @@
+# Process this file with autoconf to produce a configure script.
+AC_PREREQ(2.61)
+AC_INIT(Doxyfile.in)
+AC_CONFIG_AUX_DIR([../build-aux])
+AM_INIT_AUTOMAKE(uriparser-doc, 0.7.4)
+
+
+## Doxygen
+AC_CHECK_PROG(DOXY_CHECK, doxygen, found, missing)
+if test ${DOXY_CHECK} != "found" ; then
+	AC_MSG_ERROR([Please install Doxygen first.])
+fi
+
+
+## Graphviz
+AC_CHECK_PROG(GRAPHVIZ_CHECK, dot, found, missing)
+if test ${GRAPHVIZ_CHECK} != "found" ; then
+	AC_MSG_ERROR([Please install Graphviz first.])
+fi
+
+
+## HTML help, Qt Compressed Help
+host_triplet=`${ac_config_guess}`
+if echo "${host_triplet}" | grep cygwin &>/dev/null ; then
+	GENERATE_HTMLHELP=YES
+	QHG_LOCATION=../qhelpgenerator.exe
+else
+	GENERATE_HTMLHELP=NO
+	QHG_LOCATION=qhelpgenerator
+fi
+AC_SUBST(GENERATE_HTMLHELP)
+AC_SUBST(QHG_LOCATION)
+
+
+AC_CONFIG_FILES([
+	Doxyfile
+	Makefile
+])
+AC_CONFIG_FILES([release.sh], [chmod a+x release.sh])
+AC_OUTPUT
diff -Nru /tmp/bxdedfLB6u/uriparser-0.6.0/doc/configure.in /tmp/fLjZ2dz9P3/uriparser-0.7.4/doc/configure.in
--- uriparser-0.6.0/doc/configure.in	2007-09-19 04:09:51.000000000 +0100
+++ uriparser-0.7.4/doc/configure.in	1970-01-01 01:00:00.000000000 +0100
@@ -1,21 +0,0 @@
-# Process this file with autoconf to produce a configure script.
-AC_INIT(Doxyfile)
-AM_INIT_AUTOMAKE(uriparser, 0.6.0-doc)
-
-
-## Doxygen
-AC_CHECK_PROG(DOXY_CHECK, doxygen, found, missing)
-if test ${DOXY_CHECK} != "found" ; then
-	AC_MSG_ERROR([Please install Doxygen first.])
-fi
-
-
-## Graphviz
-AC_CHECK_PROG(GRAPHVIZ_CHECK, dot, found, missing)
-if test ${GRAPHVIZ_CHECK} != "found" ; then
-	AC_MSG_ERROR([Please install Graphviz first.])
-fi
-
-
-AC_OUTPUT(Makefile)
-
diff -Nru /tmp/bxdedfLB6u/uriparser-0.6.0/doc/Doxyfile /tmp/fLjZ2dz9P3/uriparser-0.7.4/doc/Doxyfile
--- uriparser-0.6.0/doc/Doxyfile	2007-09-19 04:10:07.000000000 +0100
+++ uriparser-0.7.4/doc/Doxyfile	1970-01-01 01:00:00.000000000 +0100
@@ -1,923 +0,0 @@
-# uriparser Doxyfile for Doxygen 1.4.7
-
-
-
-
-###############################################################
-# Project related options
-###############################################################
-
-
-PROJECT_NAME = uriparser
-# The PROJECT_NAME tag is a single word (or a sequence of words surrounded by double-quotes) that should identify the project for which the documentation is generated. This name is used in the title of most generated pages and in a few other places.
-
-
-PROJECT_NUMBER = 0.6.0
-# The PROJECT_NUMBER tag can be used to enter a project or revision number. This could be handy for archiving the generated documentation or if some version control system is used.
-
-
-OUTPUT_DIRECTORY = .
-# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) path into which the generated documentation will be written. If a relative path is entered, it will be relative to the location where doxygen was started. If left blank the current directory will be used.
-
-
-# CREATE_SUBDIRS = 
-# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create 4096 sub-directories (in 2 levels) under the output directory of each output format and will distribute the generated files over these directories. Enabling this option can be useful when feeding doxygen a huge amount of source files, where putting all generated files in the same directory would otherwise causes performance problems for the file system.
-
-
-# OUTPUT_LANGUAGE = 
-# The OUTPUT_LANGUAGE tag is used to specify the language in which all documentation generated by doxygen is written. Doxygen will use this information to generate all constant output in the proper language. The default language is English, other supported languages are: Afrikaans, Arabic, Brazilian, Catalan, Chinese, Croatian, Czech, Danish, Dutch, Finnish, French, German, Greek, Hungarian, Italian, Japanese, Korean, Lithuanian, Norwegian, Persian, Polish, Portuguese, Romanian, Russian, Serbian, Slovak, Slovene, Spanish, Swedish, and Ukrainian.
-
-
-# USE_WINDOWS_ENCODING = 
-# This tag can be used to specify the encoding used in the generated output. The encoding is not always determined by the language that is chosen, but also whether or not the output is meant for Windows or non-Windows users. In case there is a difference, setting the USE_WINDOWS_ENCODING tag to YES forces the Windows encoding, (this is the default for the Windows binary), whereas setting the tag to NO uses a Unix-style encoding (the default for all platforms other than Windows).
-
-
-# BRIEF_MEMBER_DESC = 
-# If the BRIEF_MEMBER_DESC tag is set to YES (the default) doxygen will include brief member descriptions after the members that are listed in the file and class documentation (similar to JavaDoc). Set to NO to disable this.
-
-
-# REPEAT_BRIEF = 
-# If the REPEAT_BRIEF tag is set to YES (the default) doxygen will prepend the brief description of a member or function before the detailed description
-#
-# Note:
-# If both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the brief descriptions will be completely suppressed.
-
-
-# ABBREVIATE_BRIEF = 
-# This tag implements a quasi-intelligent brief description abbreviator that is used to form the text in various listings. Each string in this list, if found as the leading text of the brief description, will be stripped from the text and the result after processing the whole list, is used as the annotated text. Otherwise, the brief description is used as-is. If left blank, the following values are used ("\$name" is automatically replaced with the name of the entity): "The $name class" "The $name widget" "The $name file" "is" "provides" "specifies" "contains" "represents" "a" "an" "the".
-
-
-# ALWAYS_DETAILED_SEC = 
-# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then doxygen will generate a detailed section even if there is only a brief description.
-
-
-# INLINE_INHERITED_MEMB = 
-# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all inherited members of a class in the documentation of that class as if those members were ordinary class members. Constructors, destructors and assignment operators of the base classes will not be shown.
-
-
-FULL_PATH_NAMES = NO
-# If the FULL_PATH_NAMES tag is set to YES doxygen will prepend the full path before files name in the file list and in the header files. If set to NO the shortest path that makes the file name unique will be used
-
-
-# STRIP_FROM_PATH = 
-# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag can be used to strip a user-defined part of the path. Stripping is only done if one of the specified strings matches the left-hand part of the path. The tag can be used to show relative paths in the file list. If left blank the directory from which doxygen is run is used as the path to strip.
-
-
-# STRIP_FROM_INC_PATH = 
-# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of the path mentioned in the documentation of a class, which tells the reader which header file to include in order to use a class. If left blank only the name of the header file containing the class definition is used. Otherwise one should specify the include paths that are normally passed to the compiler using the -I flag.
-
-
-# CASE_SENSE_NAMES = 
-# If the CASE_SENSE_NAMES tag is set to NO then doxygen will only generate file names in lower-case letters. If set to YES upper-case letters are also allowed. This is useful if you have classes or files whose names only differ in case and if your file system supports case sensitive file names. Windows users are advised to set this option to NO.
-
-
-# SHORT_NAMES = 
-# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter (but less readable) file names. This can be useful is your file systems doesn't support long names like on DOS, Mac, or CD-ROM.
-
-
-# JAVADOC_AUTOBRIEF = 
-# If the JAVADOC_AUTOBRIEF is set to YES then doxygen will interpret the first line (until the first dot) of a JavaDoc-style comment as the brief description. If set to NO (the default), the Javadoc-style will behave just like the Qt-style comments.
-
-
-BUILTIN_STL_SUPPORT = NO
-# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want to include (a tag file for) the STL sources as input, then you should set this tag to YES in order to let doxygen match functions declarations and definitions whose arguments contain STL classes (e.g. func(std::string); v.s. func(std::string) {}). This also make the inheritance and collaboration diagrams that involve STL classes more complete and accurate.
-
-
-# DISTRIBUTE_GROUP_DOC = 
-# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC tag is set to YES, then doxygen will reuse the documentation of the first member in the group (if any) for the other members of the group. By default all members of a group must be documented explicitly.
-
-
-# MULTILINE_CPP_IS_BRIEF = 
-# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen treat a multi-line C++ special comment block (i.e. a block of //! or /// comments) as a brief description. This used to be the default behaviour. The new default is to treat a multi-line C++ comment block as a detailed description. Set this tag to YES if you prefer the old behaviour instead. Note that setting this tag to YES also means that rational rose comments are not recognized any more.
-
-
-DETAILS_AT_TOP = YES
-# If the DETAILS_AT_TOP tag is set to YES then Doxygen will output the detailed description near the top, like JavaDoc. If set to NO, the detailed description appears after the member documentation.
-
-
-# INHERIT_DOCS = 
-# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented member inherits the documentation from any documented member that it re-implements.
-
-
-# SEPARATE_MEMBER_PAGES = 
-# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce a new page for each member. If set to NO, the documentation of a member will be part of the file/class/namespace that contains it.
-
-
-# TAB_SIZE = 
-# the TAB_SIZE tag can be used to set the number of spaces in a tab. Doxygen uses this value to replace tabs by spaces in code fragments.
-
-
-# ALIASES = 
-# This tag can be used to specify a number of aliases that acts as commands in the documentation. An alias has the form
-#
-# name=value
-#
-# For example adding
-#
-# "sideeffect=\par Side Effects:\n" 
-#
-# will allow you to put the command \sideeffect (or @sideeffect) in the documentation, which will result in a user-defined paragraph with heading "Side Effects:". You can put \n's in the value part of an alias to insert newlines.
-
-
-OPTIMIZE_OUTPUT_FOR_C = YES
-# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources only. Doxygen will then generate output that is more tailored for C. For instance, some of the names that are used will be different. The list of all members will be omitted, etc.
-
-
-# OPTIMIZE_OUTPUT_JAVA = 
-# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java or Python sources only. Doxygen will then generate output that is more tailored for that language. For instance, namespaces will be presented as packages, qualified scopes will look different, etc.
-
-
-# SUBGROUPING = 
-# Set the SUBGROUPING tag to YES (the default) to allow class member groups of the same type (for instance a group of public functions) to be put as a subgroup of that type (e.g. under the Public Functions section). Set it to NO to prevent subgrouping. Alternatively, this can be done per class using the \nosubgrouping command.
-
-
-
-
-###############################################################
-# Build related options
-###############################################################
-
-
-EXTRACT_ALL = NO
-# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in documentation are documented, even if no documentation was available. Private class members and static file members will be hidden unless the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES
-#
-# Note:
-# This will also disable the warnings about undocumented members that are normally produced when WARNINGS is set to YES 
-
-
-EXTRACT_PRIVATE = YES
-# If the EXTRACT_PRIVATE tag is set to YES all private members of a class will be included in the documentation.
-
-
-EXTRACT_STATIC = YES
-# If the EXTRACT_STATIC tag is set to YES all static members of a file will be included in the documentation.
-
-
-# EXTRACT_LOCAL_CLASSES = 
-# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs) defined locally in source files will be included in the documentation. If set to NO only classes defined in header files are included. Does not have any effect for Java sources.
-
-
-# EXTRACT_LOCAL_METHODS = 
-# This flag is only useful for Objective-C code. When set to YES local methods, which are defined in the implementation section but not in the interface are included in the documentation. If set to NO (the default) only methods in the interface are included.
-
-
-HIDE_UNDOC_MEMBERS = NO
-# If the HIDE_UNDOC_MEMBERS tag is set to YES, doxygen will hide all undocumented members inside documented classes or files. If set to NO (the default) these members will be included in the various overviews, but no documentation section is generated. This option has no effect if EXTRACT_ALL is enabled.
-
-
-HIDE_UNDOC_CLASSES = NO
-# If the HIDE_UNDOC_CLASSESS tag is set to YES, doxygen will hide all undocumented classes. If set to NO (the default) these classes will be included in the various overviews. This option has no effect if EXTRACT_ALL is enabled.
-
-
-HIDE_FRIEND_COMPOUNDS = NO
-# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all friend (class|struct|union) declarations. If set to NO (the default) these declarations will be included in the documentation.
-
-
-# HIDE_IN_BODY_DOCS = 
-# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any documentation blocks found inside the body of a function. If set to NO (the default) these blocks will be appended to the function's detailed documentation block.
-
-
-# INTERNAL_DOCS = 
-# The INTERNAL_DOCS tag determines if documentation that is typed after a \internal command is included. If the tag is set to NO (the default) then the documentation will be excluded. Set it to YES to include the internal documentation.
-
-
-HIDE_SCOPE_NAMES = YES
-# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then doxygen will show members with their full class and namespace scopes in the documentation. If set to YES the scope will be hidden.
-
-
-SHOW_INCLUDE_FILES = YES
-# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then doxygen will put a list of the files that are included by a file in the documentation of that file.
-
-
-# INLINE_INFO = 
-# If the INLINE_INFO tag is set to YES (the default) then a tag [inline] is inserted in the documentation for inline members.
-
-
-# SORT_MEMBER_DOCS = 
-# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen will sort the (detailed) documentation of file and class members alphabetically by member name. If set to NO the members will appear in declaration order.
-
-
-# SORT_BRIEF_DOCS = 
-# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief descriptions of file, namespace and class members alphabetically by member name. If set to NO (the default) the members will appear in declaration order.
-
-
-# GENERATE_DEPRECATEDLIST = 
-# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or disable (NO) the deprecated list. This list is created by putting \deprecated commands in the documentation.
-
-
-# GENERATE_TODOLIST = 
-# The GENERATE_TODOLIST tag can be used to enable (YES) or disable (NO) the todo list. This list is created by putting \todo commands in the documentation.
-
-
-# GENERATE_TESTLIST = 
-# The GENERATE_TESTLIST tag can be used to enable (YES) or disable (NO) the test list. This list is created by putting \test commands in the documentation.
-
-
-# GENERATE_BUGLIST = 
-# The GENERATE_BUGLIST tag can be used to enable (YES) or disable (NO) the bug list. This list is created by putting \bug commands in the documentation.
-
-
-# ENABLED_SECTIONS = 
-# The ENABLED_SECTIONS tag can be used to enable conditional documentation sections, marked by \if <section-label> ... \endif and \cond <section-label> ... \endcond blocks.
-
-
-# MAX_INITIALIZER_LINES = 
-# The MAX_INITIALIZER_LINES tag determines the maximum number of lines that the initial value of a variable or define can be. If the initializer consists of more lines than specified here it will be hidden. Use a value of 0 to hide initializers completely. The appearance of the value of individual variables and defines can be controlled using \showinitializer or \hideinitializer command in the documentation.
-
-
-SHOW_USED_FILES = YES
-# Set the SHOW_USED_FILES tag to NO to disable the list of files generated at the bottom of the documentation of classes and structs. If set to YES the list will mention the files that were used to generate the documentation.
-
-
-SHOW_DIRECTORIES = NO
-# If the sources in your project are distributed over multiple directories then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy in the documentation.
-
-
-
-
-###############################################################
-# Options related to warning and progress messages
-###############################################################
-
-
-QUIET = YES
-# The QUIET tag can be used to turn on/off the messages that are generated to standard output by doxygen. Possible values are YES and NO, where YES implies that the messages are off. If left blank NO is used.
-
-
-# WARNINGS = 
-# The WARNINGS tag can be used to turn on/off the warning messages that are generated to standard error by doxygen. Possible values are YES and NO, where YES implies that the warnings are on. If left blank NO is used.
-#
-# Tip: Turn warnings on while writing the documentation.
-
-
-WARN_IF_UNDOCUMENTED = YES
-# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings for undocumented members. If EXTRACT_ALL is set to YES then this flag will automatically be disabled.
-
-
-WARN_IF_DOC_ERROR = YES
-# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for potential errors in the documentation, such as not documenting some parameters in a documented function, or documenting parameters that don't exist or using markup commands wrongly.
-
-
-WARN_NO_PARAMDOC = YES
-# This WARN_NO_PARAMDOC option can be abled to get warnings for functions that are documented, but have no documentation for their parameters or return value. If set to NO (the default) doxygen will only warn about wrong or incomplete parameter documentation, but not about the absence of documentation.
-
-
-WARN_FORMAT = "WARNING: $text ($line, $file)"
-# The WARN_FORMAT tag determines the format of the warning messages that doxygen can produce. The string should contain the $file, $line, and $text tags, which will be replaced by the file and line number from which the warning originated and the warning text.
-
-
-# WARN_LOGFILE = 
-# The WARN_LOGFILE tag can be used to specify a file to which warning and error messages should be written. If left blank the output is written to stderr.
-
-
-
-
-###############################################################
-# Input related options
-###############################################################
-
-
-INPUT = ../include
-# The INPUT tag is used to specify the files and/or directories that contain documented source files. You may enter file names like myfile.cpp or directories like /usr/src/myproject. Separate the files or directories with spaces.
-#
-# Note: If this tag is empty the current directory is searched.
-
-
-# FILE_PATTERNS = 
-# If the value of the INPUT tag contains directories, you can use the FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and *.h ) to filter out the source-files in the directories. If left blank the following patterns are tested: .c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx *.hpp .h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm
-
-
-# FILE_VERSION_FILTER = 
-# The FILE_VERSION_FILTER tag can be used to specify a program or script that doxygen should invoke to get the current version for each file (typically from the version control system). Doxygen will invoke the program by executing (via popen()) the command command input-file, where command is the value of the FILE_VERSION_FILTER tag, and input-file is the name of an input file provided by doxygen. Whatever the program writes to standard output is used as the file version.
-#
-# Example of using a shell script as a filter for Unix:
-#
-# FILE_VERSION_FILTER = "/bin/sh versionfilter.sh"
-#
-# Example shell script for CVS:
-#
-# #!/bin/sh
-# cvs status $1 | sed -n 's/^[ \]*Working revision:[ \t]*\([0-9][0-9\.]*\).*/\1/p'
-#
-# Example shell script for Subversion:
-#
-# #!/bin/sh
-# svn stat -v $1 | sed -n 's/^[ A-Z?\*|!]\{1,15\}/r/;s/ \{1,15\}/\/r/;s/ .*//p'
-#
-# Example filter for ClearCase:
-#
-# FILE_VERSION_INFO = "cleartool desc -fmt \%Vn"
-
-
-RECURSIVE = YES
-# The RECURSIVE tag can be used to specify whether or not subdirectories should be searched for input files as well. Possible values are YES and NO. If left blank NO is used.
-
-
-# EXCLUDE = 
-# The EXCLUDE tag can be used to specify files and/or directories that should excluded from the INPUT source files. This way you can easily exclude a subdirectory from a directory tree whose root is specified with the INPUT tag.
-
-
-# EXCLUDE_SYMLINKS = 
-# The EXCLUDE_SYMLINKS tag can be used select whether or not files or directories that are symbolic links (a Unix filesystem feature) are excluded from the input.
-
-
-# EXCLUDE_PATTERNS = 
-# If the value of the INPUT tag contains directories, you can use the EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude certain files from those directories.
-
-# Note that the wildcards are matched against the file with absolute path, so to exclude all test directories use the pattern */test/*
-
-
-# EXAMPLE_PATH = 
-# The EXAMPLE_PATH tag can be used to specify one or more files or directories that contain example code fragments that are included (see the \include command in section \include).
-
-
-# EXAMPLE_RECURSIVE = 
-# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be searched for input files to be used with the \include or \dontinclude commands irrespective of the value of the RECURSIVE tag. Possible values are YES and NO. If left blank NO is used.
-
-
-# EXAMPLE_PATTERNS = 
-# If the value of the EXAMPLE_PATH tag contains directories, you can use the EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp and *.h) to filter out the source-files in the directories. If left blank all files are included.
-
-
-# IMAGE_PATH = 
-# The IMAGE_PATH tag can be used to specify one or more files or directories that contain images that are to be included in the documentation (see the \image command).
-
-
-INPUT_FILTER = "cpp -C -D URI_DOXYGEN -I ../include"
-# The INPUT_FILTER tag can be used to specify a program that doxygen should invoke to filter for each input file. Doxygen will invoke the filter program by executing (via popen()) the command:
-#
-# <filter> <input-file>
-#
-# where <filter> is the value of the INPUT_FILTER tag, and <input-file> is the name of an input file. Doxygen will then use the output that the filter program writes to standard output.
-
-
-# FILTER_PATTERNS = 
-# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern basis. Doxygen will compare the file name with each pattern and apply the filter if there is a match. The filters are a list of the form: pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further info on how filters are used. If FILTER_PATTERNS is empty, INPUT_FILTER is applied to all files.
-
-
-# FILTER_SOURCE_FILES = 
-# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using INPUT_FILTER ) will also be used to filter the input files that are used for producing the source files to browse (i.e. when SOURCE_BROWSER is set to YES).
-
-
-
-
-###############################################################
-# Source browsing related options
-###############################################################
-
-
-# SOURCE_BROWSER = 
-# If the SOURCE_BROWSER tag is set to YES then a list of source files will be generated. Documented entities will be cross-referenced with these sources.
-
-
-# INLINE_SOURCES = 
-# Setting the INLINE_SOURCES tag to YES will include the body of functions, classes and enums directly into the documentation.
-
-
-STRIP_CODE_COMMENTS = YES
-# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct doxygen to hide any special comment blocks from generated source code fragments. Normal C and C++ comments will always remain visible.
-
-
-# REFERENCED_BY_RELATION = 
-# If the REFERENCED_BY_RELATION tag is set to YES (the default) then for each documented function all documented functions referencing it will be listed.
-
-
-# REFERENCES_RELATION = 
-# If the REFERENCES_RELATION tag is set to YES (the default) then for each documented function all documented entities called/used by that function will be listed.
-
-
-# REFERENCES_LINK_SOURCE = 
-# If the REFERENCES_LINK_SOURCE tag is set to YES (the default) and SOURCE_BROWSER tag is set to YES, then the hyperlinks from functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will link to the source code. Otherwise they will link to the documentstion.
-
-
-# VERBATIM_HEADERS = 
-# If the VERBATIM_HEADERS tag is set the YES (the default) then doxygen will generate a verbatim copy of the header file for each class for which an include is specified. Set to NO to disable this.
-#
-# See also:
-# Section \class.
-
-
-# USE_HTAGS = 
-# If the USE_HTAGS tag is set to YES then the references to source code will point to the HTML generated by the htags(1) tool instead of doxygen built-in source browser. The htags tool is part of GNU's global source tagging system (see http://www.gnu.org/software/global/global.html). The use it do the following:
-#
-# 1. Install the latest version of global (i.e. 4.8.6 or better)
-# 2. Enable SOURCE_BROWSER and USE_HTAGS in the config file
-# 3. Make sure the INPUT points to the root of the source tree
-# 4. Run doxygen as normal
-#
-# Doxygen will invoke htags (and that will in turn invoke gtags), so these tools must be available from the command line (i.e. in the search path).
-#
-# The result: instead of the source browser generated by doxygen, the links to source code will now point to the output of htags.
-
-
-
-
-###############################################################
-# Alphabetical index options
-###############################################################
-
-
-ALPHABETICAL_INDEX = NO
-# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index of all compounds will be generated. Enable this if the project contains a lot of classes, structs, unions or interfaces.
-
-
-# COLS_IN_ALPHA_INDEX = 
-# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns in which this list will be split (can be a number in the range [1..20])
-
-
-# IGNORE_PREFIX = 
-# In case all classes in a project start with a common prefix, all classes will be put under the same header in the alphabetical index. The IGNORE_PREFIX tag can be used to specify a prefix (or a list of prefixes) that should be ignored while generating the index headers.
-
-
-
-
-###############################################################
-# HTML related options
-###############################################################
-
-
-GENERATE_HTML = YES
-# If the GENERATE_HTML tag is set to YES (the default) doxygen will generate HTML output
-
-
-# HTML_OUTPUT = TODO
-# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. If a relative path is entered the value of OUTPUT_DIRECTORY will be put in front of it. If left blank `html' will be used as the default path.
-
-
-# HTML_FILE_EXTENSION = 
-# The HTML_FILE_EXTENSION tag can be used to specify the file extension for each generated HTML page (for example: .htm, .php, .asp). If it is left blank doxygen will generate files with .html extension.
-
-
-# HTML_HEADER = TODO
-# The HTML_HEADER tag can be used to specify a user-defined HTML header file for each generated HTML page. To get valid HTML the header file should contain at least a <HTML> and a <BODY> tag, but it is good idea to include the style sheet that is generated by doxygen as well. Minimal example:
-#
-# <HTML>
-# <HEAD>
-# <TITLE>My title</TITLE>
-# <LINK HREF="doxygen.css" REL="stylesheet" TYPE="text/css">
-# </HEAD>
-# <BODY BGCOLOR="#FFFFFF">
-#
-# If the tag is left blank doxygen will generate a standard header.
-#
-# The following commands have a special meaning inside the header: $title, $datetime, $date, $doxygenversion, $projectname, and $projectnumber. Doxygen will replace them by respectively the title of the page, the current date and time, only the current date, the version number of doxygen, the project name (see PROJECT_NAME), or the project number (see PROJECT_NUMBER).
-#
-# If CREATE_SUBDIRS is enabled, the command $relpath$ can be used to produce a relative path to the root of the HTML output directory, e.g. use $relpath$doxygen.css, to refer to the standard style sheet.
-#
-# See also section Doxygen usage for information on how to generate the default header that doxygen normally uses.
-
-
-# HTML_FOOTER = 
-# The HTML_FOOTER tag can be used to specify a user-defined HTML footer for each generated HTML page. To get valid HTML the footer file should contain at least a </BODY> and a </HTML> tag. A minimal example:
-#
-# </BODY>
-# </HTML>
-#
-# If the tag is left blank doxygen will generate a standard footer.
-#
-# The following commands have a special meaning inside the footer: $title, $datetime, $date, $doxygenversion, $projectname, $projectnumber. Doxygen will replace them by respectively the title of the page, the current date and time, only the current date, the version number of doxygen, the project name (see PROJECT_NAME), or the project number (see PROJECT_NUMBER).
-#
-# See also section Doxygen usage for information on how to generate the default footer that doxygen normally uses.
-
-
-# HTML_STYLESHEET = 
-# The HTML_STYLESHEET tag can be used to specify a user-defined cascading style sheet that is used by each HTML page. It can be used to fine-tune the look of the HTML output. If the tag is left blank doxygen will generate a default style sheet.
-#
-# See also section Doxygen usage for information on how to generate the style sheet that doxygen normally uses.
-
-
-# HTML_ALIGN_MEMBERS = 
-# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes, files or namespaces will be aligned in HTML using tables. If set to NO a bullet list will be used.
-#
-# Note: Setting this tag to NO will become obsolete in the future, since I only intent to support and test the aligned representation.
-
-
-# GENERATE_HTMLHELP = 
-# If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three additional HTML index files: index.hhp, index.hhc, and index.hhk. The index.hhp is a project file that can be read by Microsoft's HTML Help Workshop on Windows.
-#
-# The HTML Help Workshop contains a compiler that can convert all HTML output generated by doxygen into a single compressed HTML file (.chm). Compressed HTML files are now used as the Windows 98 help format, and will replace the old Windows help format (.hlp) on all Windows platforms in the future. Compressed HTML files also contain an index, a table of contents, and you can search for words in the documentation. The HTML workshop also contains a viewer for compressed HTML files.
-
-
-# CHM_FILE = 
-# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can be used to specify the file name of the resulting .chm file. You can add a path in front of the file if the result should not be written to the html output directory.
-
-
-# HHC_LOCATION = 
-# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can be used to specify the location (absolute path including file name) of the HTML help compiler (hhc.exe). If non empty doxygen will try to run the HTML help compiler on the generated index.hhp.
-
-
-# GENERATE_CHI = 
-# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag controls if a separate .chi index file is generated (YES) or that it should be included in the master .chm file (NO).
-
-
-# BINARY_TOC = 
-# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag controls whether a binary table of contents is generated (YES) or a normal table of contents (NO) in the .chm file.
-
-
-# TOC_EXPAND = 
-# The TOC_EXPAND flag can be set to YES to add extra items for group members to the table of contents of the HTML help documentation and to the tree view.
-
-
-# DISABLE_INDEX = 
-# If you want full control over the layout of the generated HTML pages it might be necessary to disable the index and replace it with your own. The DISABLE_INDEX tag can be used to turn on/off the condensed index at top of each page. A value of NO (the default) enables the index and the value YES disables it.
-
-
-# ENUM_VALUES_PER_LINE = 
-# This tag can be used to set the number of enum values (range [1..20]) that doxygen will group on one line in the generated HTML documentation.
-
-
-# GENERATE_TREEVIEW = 
-# If the GENERATE_TREEVIEW tag is set to YES, a side panel will be generated containing a tree-like index structure (just like the one that is generated for HTML Help). For this to work a browser that supports JavaScript and frames is required (for instance Mozilla 1.0+, Netscape 6.0+ or Internet explorer 5.0+ or Konqueror).
-
-
-# TREEVIEW_WIDTH = 
-# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be used to set the initial width (in pixels) of the frame in which the tree is shown.
-
-
-
-
-###############################################################
-# LaTeX related options
-###############################################################
-
-
-GENERATE_LATEX = NO
-# If the GENERATE_LATEX tag is set to YES (the default) doxygen will generate $\mbox{\LaTeX}$ output.
-
-
-# LATEX_OUTPUT = 
-# The LATEX_OUTPUT tag is used to specify where the $\mbox{\LaTeX}$ docs will be put. If a relative path is entered the value of OUTPUT_DIRECTORY will be put in front of it. If left blank `latex' will be used as the default path.
-
-
-# LATEX_CMD_NAME = 
-# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be invoked. If left blank `latex' will be used as the default command name.
-
-
-# MAKEINDEX_CMD_NAME = 
-# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate index for LaTeX. If left blank `makeindex' will be used as the default command name.
-
-
-# COMPACT_LATEX = 
-# If the COMPACT_LATEX tag is set to YES doxygen generates more compact $\mbox{\LaTeX}$ documents. This may be useful for small projects and may help to save some trees in general.
-
-
-# PAPER_TYPE = 
-# The PAPER_TYPE tag can be used to set the paper type that is used by the printer. Possible values are:
-#
-# * a4 (210 x 297 mm).
-# * a4wide (same as a4, but including the a4wide package).
-# * letter (8.5 x 11 inches).
-# * legal (8.5 x 14 inches).
-# * executive (7.25 x 10.5 inches)
-#
-# If left blank a4wide will be used.
-
-
-# EXTRA_PACKAGES = 
-# The EXTRA_PACKAGES tag can be used to specify one or more $\mbox{\LaTeX}$ package names that should be included in the $\mbox{\LaTeX}$ output. To get the times font for instance you can specify
-#
-# EXTRA_PACKAGES = times
-#
-# If left blank no extra packages will be included.
-
-
-# LATEX_HEADER = 
-# The LATEX_HEADER tag can be used to specify a personal $\mbox{\LaTeX}$ header for the generated $\mbox{\LaTeX}$ document. The header should contain everything until the first chapter.
-#
-# If it is left blank doxygen will generate a standard header. See section Doxygen usage for information on how to let doxygen write the default header to a separate file.
-#
-# Note:
-# Only use a user-defined header if you know what you are doing!
-#
-# The following commands have a special meaning inside the header: $title, $datetime, $date, $doxygenversion, $projectname, $projectnumber. Doxygen will replace them by respectively the title of the page, the current date and time, only the current date, the version number of doxygen, the project name (see PROJECT_NAME), or the project number (see PROJECT_NUMBER).
-
-
-# PDF_HYPERLINKS = 
-# If the PDF_HYPERLINKS tag is set to YES, the $\mbox{\LaTeX}$ that is generated is prepared for conversion to PDF (using ps2pdf or pdflatex). The PDF file will contain links (just like the HTML output) instead of page references. This makes the output suitable for online browsing using a PDF viewer.
-
-
-# USE_PDFLATEX = 
-# If the LATEX_PDFLATEX tag is set to YES, doxygen will use pdflatex to generate the PDF file directly from the $\mbox{\LaTeX}$ files.
-
-
-# LATEX_BATCHMODE = 
-# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \batchmode. command to the generated $\mbox{\LaTeX}$ files. This will instruct $\mbox{\LaTeX}$ to keep running if errors occur, instead of asking the user for help. This option is also used when generating formulas in HTML.
-
-
-# LATEX_HIDE_INDICES = 
-# If LATEX_HIDE_INDICES is set to YES then doxygen will not include the index chapters (such as File Index, Compound Index, etc.) in the output.
-
-
-
-
-###############################################################
-# RTF related options
-###############################################################
-
-
-# GENERATE_RTF = 
-# If the GENERATE_RTF tag is set to YES doxygen will generate RTF output. The RTF output is optimized for Word 97 and may not look too pretty with other readers/editors.
-
-
-# RTF_OUTPUT = 
-# The RTF_OUTPUT tag is used to specify where the RTF docs will be put. If a relative path is entered the value of OUTPUT_DIRECTORY will be put in front of it. If left blank rtf will be used as the default path.
-
-
-# COMPACT_RTF = 
-# If the COMPACT_RTF tag is set to YES doxygen generates more compact RTF documents. This may be useful for small projects and may help to save some trees in general.
-
-
-# RTF_HYPERLINKS = 
-# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated will contain hyperlink fields. The RTF file will contain links (just like the HTML output) instead of page references. This makes the output suitable for online browsing using Word or some other Word compatible reader that support those fields.
-#
-# note:
-# WordPad (write) and others do not support links.
-
-
-# RTF_STYLESHEET_FILE = 
-# Load stylesheet definitions from file. Syntax is similar to doxygen's config file, i.e. a series of assignments. You only have to provide replacements, missing definitions are set to their default value.
-#
-# See also section Doxygen usage for information on how to generate the default style sheet that doxygen normally uses.
-
-
-# RTF_EXTENSIONS_FILE = 
-# Set optional variables used in the generation of an RTF document. Syntax is similar to doxygen's config file. A template extensions file can be generated using doxygen -e rtf extensionFile.
-
-
-
-
-###############################################################
-# Man page related options
-###############################################################
-
-
-# GENERATE_MAN = 
-# If the GENERATE_MAN tag is set to YES (the default) doxygen will generate man pages for classes and files.
-
-
-# MAN_OUTPUT = 
-# The MAN_OUTPUT tag is used to specify where the man pages will be put. If a relative path is entered the value of OUTPUT_DIRECTORY will be put in front of it. If left blank `man' will be used as the default path. A directory man3 will be created inside the directory specified by MAN_OUTPUT.
-
-
-# MAN_EXTENSION = 
-# The MAN_EXTENSION tag determines the extension that is added to the generated man pages (default is the subroutine's section .3)
-
-
-# MAN_LINKS = 
-# If the MAN_LINKS tag is set to YES and doxygen generates man output, then it will generate one additional man file for each entity documented in the real man page(s). These additional files only source the real man page, but without them the man command would be unable to find the correct page. The default is NO.
-
-
-
-
-###############################################################
-# XML related options
-###############################################################
-
-
-# GENERATE_XML = 
-# If the GENERATE_XML tag is set to YES Doxygen will generate an XML file that captures the structure of the code including all documentation.
-
-
-# XML_OUTPUT = 
-# The XML_OUTPUT tag is used to specify where the XML pages will be put. If a relative path is entered the value of OUTPUT_DIRECTORY will be put in front of it. If left blank xml will be used as the default path.
-
-
-# XML_SCHEMA = 
-# The XML_SCHEMA tag can be used to specify an XML schema, which can be used by a validating XML parser to check the syntax of the XML files.
-
-
-# XML_DTD = 
-# The XML_DTD tag can be used to specify an XML DTD, which can be used by a validating XML parser to check the syntax of the XML files.
-
-
-# XML_PROGRAMLISTING = 
-# If the XML_PROGRAMLISTING tag is set to YES Doxygen will dump the program listings (including syntax highlighting and cross-referencing information) to the XML output. Note that enabling this will significantly increase the size of the XML output.
-
-
-
-
-###############################################################
-# AUTOGEN_DEF related options
-###############################################################
-
-
-# GENERATE_AUTOGEN_DEF = 
-# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will generate an AutoGen Definitions (see http://autogen.sf.net) file that captures the structure of the code including all documentation. Note that this feature is still experimental and incomplete at the moment.
-
-
-
-
-###############################################################
-# PERLMOD related options
-###############################################################
-
-
-# GENERATE_PERLMOD = 
-# If the GENERATE_PERLMOD tag is set to YES Doxygen will generate a Perl module file that captures the structure of the code including all documentation. Note that this feature is still experimental and incomplete at the moment.
-
-
-# PERLMOD_LATEX = 
-# If the PERLMOD_LATEX tag is set to YES Doxygen will generate the necessary Makefile rules, Perl scripts and LaTeX code to be able to generate PDF and DVI output from the Perl module output.
-
-
-# PERLMOD_PRETTY = 
-# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be nicely formatted so it can be parsed by a human reader. This is useful if you want to understand what is going on. On the other hand, if this tag is set to NO the size of the Perl module output will be much smaller and Perl will parse it just the same.
-
-
-# PERLMOD_MAKEVAR_PREFIX = 
-# The names of the make variables in the generated doxyrules.make file are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. This is useful so different doxyrules.make files included by the same Makefile don't overwrite each other's variables.
-
-
-
-
-###############################################################
-# Preprocessor related options
-###############################################################
-
-
-ENABLE_PREPROCESSING = YES
-# If the ENABLE_PREPROCESSING tag is set to YES (the default) doxygen will evaluate all C-preprocessor directives found in the sources and include files.
-
-
-MACRO_EXPANSION = NO
-# If the MACRO_EXPANSION tag is set to YES doxygen will expand all macro names in the source code. If set to NO (the default) only conditional compilation will be performed. Macro expansion can be done in a controlled way by setting EXPAND_ONLY_PREDEF to YES.
-
-
-EXPAND_ONLY_PREDEF = NO
-# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES then the macro expansion is limited to the macros specified with the PREDEFINED and EXPAND_AS_DEFINED tags.
-
-
-SEARCH_INCLUDES = YES
-# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files in the INCLUDE_PATH (see below) will be searched if a #include is found.
-
-
-INCLUDE_PATH = ../include
-# The INCLUDE_PATH tag can be used to specify one or more directories that contain include files that are not input files but should be processed by the preprocessor.
-
-
-# PREDEFINED = 
-# The PREDEFINED tag can be used to specify one or more macro names that are defined before the preprocessor is started (similar to the -D option of gcc). The argument of the tag is a list of macros of the form: name or name=definition (no spaces). If the definition and the "=" are omitted, "=1" is assumed. To prevent a macro definition from being undefined via #undef or recursively expanded use the := operator instead of the = operator.
-
-
-# EXPAND_AS_DEFINED = 
-# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then this tag can be used to specify a list of macro names that should be expanded. The macro definition that is found in the sources will be used. Use the PREDEFINED tag if you want to use a different macro definition.
-
-
-# SKIP_FUNCTION_MACROS = 
-# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then doxygen's preprocessor will remove all function-like macros that are alone on a line, have an all uppercase name, and do not end with a semicolon. Such function macros are typically used for boiler-plate code, and will confuse the parser if not removed.
-
-
-
-
-###############################################################
-# External reference options
-###############################################################
-
-
-# TAGFILES = 
-# The TAGFILES tag can be used to specify one or more tagfiles.
-#
-# See section Doxytag usage for more information about the usage of tag files.
-#
-# Optionally an initial location of the external documentation can be added for each tagfile. The format of a tag file without this location is as follows:
-#
-# TAGFILES = file1 file2 ... 
-#
-# Adding location for the tag files is done as follows:
-#
-# TAGFILES = file1=loc1 "file2 = loc2" ... 
-#
-# where loc1 and loc2 can be relative or absolute paths or URLs, If a location is present for each tag, the installdox tool (see section Installdox usage for more information) does not have to be run to correct the links.
-#
-# Note:
-# Each tag file must have a unique name (where the name does not include the path) If a tag file is not located in the directory in which doxygen is run, you must also specify the path to the tagfile here.
-
-
-# GENERATE_TAGFILE = 
-# When a file name is specified after GENERATE_TAGFILE, doxygen will create a tag file that is based on the input files it reads. See section Doxytag usage for more information about the usage of tag files.
-
-
-# ALLEXTERNALS = 
-# If the ALLEXTERNALS tag is set to YES all external class will be listed in the class index. If set to NO only the inherited external classes will be listed.
-
-
-# EXTERNAL_GROUPS = 
-# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed in the modules index. If set to NO, only the current project's groups will be listed.
-
-
-# PERL_PATH = 
-# The PERL_PATH should be the absolute path and name of the perl script interpreter (i.e. the result of `which perl').
-
-
-
-
-###############################################################
-# Dot options
-###############################################################
-
-
-# CLASS_DIAGRAMS = 
-# If the CLASS_DIAGRAMS tag is set to YES (the default) doxygen will generate a class diagram (in HTML and $\mbox{\LaTeX}$) for classes with base or super classes. Setting the tag to NO turns the diagrams off. Note that this option is superseded by the HAVE_DOT option below. This is only a fallback. It is recommended to install and use dot, since it yields more powerful graphs.
-
-
-HAVE_DOT = YES
-# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is available from the path. This tool is part of Graphviz, a graph visualization toolkit from AT&T and Lucent Bell Labs. The other options in this section have no effect if this option is set to NO (the default)
-
-
-CLASS_GRAPH = NO
-# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen will generate a graph for each documented class showing the direct and indirect inheritance relations. Setting this tag to YES will force the the CLASS_DIAGRAMS tag to NO.
-
-
-COLLABORATION_GRAPH = NO
-# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen will generate a graph for each documented class showing the direct and indirect implementation dependencies (inheritance, containment, and class references variables) of the class with other documented classes.
-
-
-# GROUP_GRAPHS
-# If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen will generate a graph for groups, showing the direct groups dependencies.
-
-
-UML_LOOK = NO
-# If the UML_LOOK tag is set to YES doxygen will generate inheritance and collaboration diagrams in a style similar to the OMG's Unified Modeling Language.
-
-
-# TEMPLATE_RELATIONS = 
-# If the TEMPLATE_RELATIONS and HAVE_DOT tags are set to YES then doxygen will show the relations between templates and their instances.
-
-
-HIDE_UNDOC_RELATIONS = NO
-# If set to YES, the inheritance and collaboration graphs will hide inheritance and usage relations if the target is undocumented or is not a class.
-
-
-INCLUDE_GRAPH = YES
-# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT tags are set to YES then doxygen will generate a graph for each documented file showing the direct and indirect include dependencies of the file with other documented files.
-
-
-INCLUDED_BY_GRAPH = YES
-# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and HAVE_DOT tags are set to YES then doxygen will generate a graph for each documented header file showing the documented files that directly or indirectly include this file.
-
-
-CALL_GRAPH = NO
-# If the CALL_GRAPH and HAVE_DOT tags are set to YES then doxygen will generate a call dependency graph for every global function or class method. Note that enabling this option will significantly increase the time of a run. So in most cases it will be better to enable call graphs for selected functions only using the \callgraph command.
-
-
-CALLER_GRAPH = NO
-# If the CALLER_GRAPH and HAVE_DOT tags are set to YES then doxygen will generate a caller dependency graph for every global function or class method. Note that enabling this option will significantly increase the time of a run. So in most cases it will be better to enable caller graphs for selected functions only using the \callergraph command.
-
-
-GRAPHICAL_HIERARCHY = YES
-# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen will graphical hierarchy of all classes instead of a textual one.
-
-
-# DIRECTORY_GRAPH
-# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT options are set to YES then doxygen will show the dependencies a directory has on other directories in a graphical way. The dependency relations are determined by the #include relations between the files in the directories.
-
-
-# DOT_IMAGE_FORMAT = 
-# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images generated by dot. Possible values are gif, jpg, and png. If left blank png will be used.
-
-
-# DOT_PATH = 
-# This tag can be used to specify the path where the dot tool can be found. If left blank, it is assumed the dot tool can be found on the path.
-
-
-# DOTFILE_DIRS = 
-# This tag can be used to specify one or more directories that contain dot files that are included in the documentation (see the \dotfile command).
-
-
-# MAX_DOT_GRAPH_HEIGHT = 
-# The MAX_DOT_GRAPH_HEIGHT tag can be used to set the maximum allows height (in pixels) of the graphs generated by dot. If a graph becomes larger than this value, doxygen will try to truncate the graph, so that it fits within the specified constraint. Beware that most browsers cannot cope with very large images.
-
-
-# MAX_DOT_GRAPH_DEPTH = 
-# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the graphs generated by dot. A depth value of 3 means that only nodes reachable from the root by following a path via at most 3 edges will be shown. Nodes that lay further from the root node will be omitted. Note that setting this option to 1 or 2 may greatly reduce the computation time needed for large code bases. Also note that a graph may be further truncated if the graph's image dimensions are not sufficient to fit the graph (see MAX_DOT_GRAPH_WIDTH and MAX_DOT_GRAPH_HEIGHT). If 0 is used for the depth value (the default), the graph is not depth-constraint.
-
-
-# MAX_DOT_GRAPH_WIDTH = 
-# The MAX_DOT_GRAPH_WIDTH tag can be used to set the maximum allowed width (in pixels) of the graphs generated by dot. If a graph becomes larger than this value, doxygen will try to truncate the graph, so that it fits within the specified constraint. Beware that most browsers cannot cope with very large images.
-
-
-# DOT_TRANSPARENT = 
-# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent background. This is disabled by default, which results in a white background. Warning: Depending on the platform used, enabling this option may lead to badly anti-aliased labels on the edges of a graph (i.e. they become hard to read).
-
-
-DOT_MULTI_TARGETS = YES
-# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output files in one run (i.e. multiple -o and -T options on the command line). This makes dot run faster, but since only newer versions of dot (>1.8.10) support this, this feature is disabled by default.
-
-
-GENERATE_LEGEND = YES
-# If the GENERATE_LEGEND tag is set to YES (the default) doxygen will generate a legend page explaining the meaning of the various boxes and arrows in the dot generated graphs.
-
-
-# DOT_CLEANUP = 
-# If the DOT_CLEANUP tag is set to YES (the default) doxygen will remove the intermediate dot files that are used to generate the various graphs.
-
-
-
-
-###############################################################
-# Search engine options
-###############################################################
-
-
-# SEARCHENGINE = 
-# The SEARCHENGINE tag specifies whether or not the HTML output should contain a search facility. Possible values are YES and NO. If set to YES, doxygen will produce a search index and a PHP script to search through the index. For this to work the documentation should be viewed via a web-server running PHP version 4.1.0 or higher. (See http://www.php.net/manual/en/installation.php for installation instructions).
diff -Nru /tmp/bxdedfLB6u/uriparser-0.6.0/doc/install-sh /tmp/fLjZ2dz9P3/uriparser-0.7.4/doc/install-sh
--- uriparser-0.6.0/doc/install-sh	2007-07-06 00:26:55.000000000 +0100
+++ uriparser-0.7.4/doc/install-sh	1970-01-01 01:00:00.000000000 +0100
@@ -1,507 +0,0 @@
-#!/bin/sh
-# install - install a program, script, or datafile
-
-scriptversion=2006-10-14.15
-
-# This originates from X11R5 (mit/util/scripts/install.sh), which was
-# later released in X11R6 (xc/config/util/install.sh) with the
-# following copyright and license.
-#
-# Copyright (C) 1994 X Consortium
-#
-# Permission is hereby granted, free of charge, to any person obtaining a copy
-# of this software and associated documentation files (the "Software"), to
-# deal in the Software without restriction, including without limitation the
-# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
-# sell copies of the Software, and to permit persons to whom the Software is
-# furnished to do so, subject to the following conditions:
-#
-# The above copyright notice and this permission notice shall be included in
-# all copies or substantial portions of the Software.
-#
-# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
-# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL THE
-# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
-# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC-
-# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
-#
-# Except as contained in this notice, the name of the X Consortium shall not
-# be used in advertising or otherwise to promote the sale, use or other deal-
-# ings in this Software without prior written authorization from the X Consor-
-# tium.
-#
-#
-# FSF changes to this file are in the public domain.
-#
-# Calling this script install-sh is preferred over install.sh, to prevent
-# `make' implicit rules from creating a file called install from it
-# when there is no Makefile.
-#
-# This script is compatible with the BSD install script, but was written
-# from scratch.
-
-nl='
-'
-IFS=" ""	$nl"
-
-# set DOITPROG to echo to test this script
-
-# Don't use :- since 4.3BSD and earlier shells don't like it.
-doit="${DOITPROG-}"
-if test -z "$doit"; then
-  doit_exec=exec
-else
-  doit_exec=$doit
-fi
-
-# Put in absolute file names if you don't have them in your path;
-# or use environment vars.
-
-mvprog="${MVPROG-mv}"
-cpprog="${CPPROG-cp}"
-chmodprog="${CHMODPROG-chmod}"
-chownprog="${CHOWNPROG-chown}"
-chgrpprog="${CHGRPPROG-chgrp}"
-stripprog="${STRIPPROG-strip}"
-rmprog="${RMPROG-rm}"
-mkdirprog="${MKDIRPROG-mkdir}"
-
-posix_glob=
-posix_mkdir=
-
-# Desired mode of installed file.
-mode=0755
-
-chmodcmd=$chmodprog
-chowncmd=
-chgrpcmd=
-stripcmd=
-rmcmd="$rmprog -f"
-mvcmd="$mvprog"
-src=
-dst=
-dir_arg=
-dstarg=
-no_target_directory=
-
-usage="Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE
-   or: $0 [OPTION]... SRCFILES... DIRECTORY
-   or: $0 [OPTION]... -t DIRECTORY SRCFILES...
-   or: $0 [OPTION]... -d DIRECTORIES...
-
-In the 1st form, copy SRCFILE to DSTFILE.
-In the 2nd and 3rd, copy all SRCFILES to DIRECTORY.
-In the 4th, create DIRECTORIES.
-
-Options:
--c         (ignored)
--d         create directories instead of installing files.
--g GROUP   $chgrpprog installed files to GROUP.
--m MODE    $chmodprog installed files to MODE.
--o USER    $chownprog installed files to USER.
--s         $stripprog installed files.
--t DIRECTORY  install into DIRECTORY.
--T         report an error if DSTFILE is a directory.
---help     display this help and exit.
---version  display version info and exit.
-
-Environment variables override the default commands:
-  CHGRPPROG CHMODPROG CHOWNPROG CPPROG MKDIRPROG MVPROG RMPROG STRIPPROG
-"
-
-while test $# -ne 0; do
-  case $1 in
-    -c) shift
-        continue;;
-
-    -d) dir_arg=true
-        shift
-        continue;;
-
-    -g) chgrpcmd="$chgrpprog $2"
-        shift
-        shift
-        continue;;
-
-    --help) echo "$usage"; exit $?;;
-
-    -m) mode=$2
-        shift
-        shift
-	case $mode in
-	  *' '* | *'	'* | *'
-'*	  | *'*'* | *'?'* | *'['*)
-	    echo "$0: invalid mode: $mode" >&2
-	    exit 1;;
-	esac
-        continue;;
-
-    -o) chowncmd="$chownprog $2"
-        shift
-        shift
-        continue;;
-
-    -s) stripcmd=$stripprog
-        shift
-        continue;;
-
-    -t) dstarg=$2
-	shift
-	shift
-	continue;;
-
-    -T) no_target_directory=true
-	shift
-	continue;;
-
-    --version) echo "$0 $scriptversion"; exit $?;;
-
-    --)	shift
-	break;;
-
-    -*)	echo "$0: invalid option: $1" >&2
-	exit 1;;
-
-    *)  break;;
-  esac
-done
-
-if test $# -ne 0 && test -z "$dir_arg$dstarg"; then
-  # When -d is used, all remaining arguments are directories to create.
-  # When -t is used, the destination is already specified.
-  # Otherwise, the last argument is the destination.  Remove it from $@.
-  for arg
-  do
-    if test -n "$dstarg"; then
-      # $@ is not empty: it contains at least $arg.
-      set fnord "$@" "$dstarg"
-      shift # fnord
-    fi
-    shift # arg
-    dstarg=$arg
-  done
-fi
-
-if test $# -eq 0; then
-  if test -z "$dir_arg"; then
-    echo "$0: no input file specified." >&2
-    exit 1
-  fi
-  # It's OK to call `install-sh -d' without argument.
-  # This can happen when creating conditional directories.
-  exit 0
-fi
-
-if test -z "$dir_arg"; then
-  trap '(exit $?); exit' 1 2 13 15
-
-  # Set umask so as not to create temps with too-generous modes.
-  # However, 'strip' requires both read and write access to temps.
-  case $mode in
-    # Optimize common cases.
-    *644) cp_umask=133;;
-    *755) cp_umask=22;;
-
-    *[0-7])
-      if test -z "$stripcmd"; then
-	u_plus_rw=
-      else
-	u_plus_rw='% 200'
-      fi
-      cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;;
-    *)
-      if test -z "$stripcmd"; then
-	u_plus_rw=
-      else
-	u_plus_rw=,u+rw
-      fi
-      cp_umask=$mode$u_plus_rw;;
-  esac
-fi
-
-for src
-do
-  # Protect names starting with `-'.
-  case $src in
-    -*) src=./$src ;;
-  esac
-
-  if test -n "$dir_arg"; then
-    dst=$src
-    dstdir=$dst
-    test -d "$dstdir"
-    dstdir_status=$?
-  else
-
-    # Waiting for this to be detected by the "$cpprog $src $dsttmp" command
-    # might cause directories to be created, which would be especially bad
-    # if $src (and thus $dsttmp) contains '*'.
-    if test ! -f "$src" && test ! -d "$src"; then
-      echo "$0: $src does not exist." >&2
-      exit 1
-    fi
-
-    if test -z "$dstarg"; then
-      echo "$0: no destination specified." >&2
-      exit 1
-    fi
-
-    dst=$dstarg
-    # Protect names starting with `-'.
-    case $dst in
-      -*) dst=./$dst ;;
-    esac
-
-    # If destination is a directory, append the input filename; won't work
-    # if double slashes aren't ignored.
-    if test -d "$dst"; then
-      if test -n "$no_target_directory"; then
-	echo "$0: $dstarg: Is a directory" >&2
-	exit 1
-      fi
-      dstdir=$dst
-      dst=$dstdir/`basename "$src"`
-      dstdir_status=0
-    else
-      # Prefer dirname, but fall back on a substitute if dirname fails.
-      dstdir=`
-	(dirname "$dst") 2>/dev/null ||
-	expr X"$dst" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-	     X"$dst" : 'X\(//\)[^/]' \| \
-	     X"$dst" : 'X\(//\)$' \| \
-	     X"$dst" : 'X\(/\)' \| . 2>/dev/null ||
-	echo X"$dst" |
-	    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
-		   s//\1/
-		   q
-		 }
-		 /^X\(\/\/\)[^/].*/{
-		   s//\1/
-		   q
-		 }
-		 /^X\(\/\/\)$/{
-		   s//\1/
-		   q
-		 }
-		 /^X\(\/\).*/{
-		   s//\1/
-		   q
-		 }
-		 s/.*/./; q'
-      `
-
-      test -d "$dstdir"
-      dstdir_status=$?
-    fi
-  fi
-
-  obsolete_mkdir_used=false
-
-  if test $dstdir_status != 0; then
-    case $posix_mkdir in
-      '')
-	# Create intermediate dirs using mode 755 as modified by the umask.
-	# This is like FreeBSD 'install' as of 1997-10-28.
-	umask=`umask`
-	case $stripcmd.$umask in
-	  # Optimize common cases.
-	  *[2367][2367]) mkdir_umask=$umask;;
-	  .*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;;
-
-	  *[0-7])
-	    mkdir_umask=`expr $umask + 22 \
-	      - $umask % 100 % 40 + $umask % 20 \
-	      - $umask % 10 % 4 + $umask % 2
-	    `;;
-	  *) mkdir_umask=$umask,go-w;;
-	esac
-
-	# With -d, create the new directory with the user-specified mode.
-	# Otherwise, rely on $mkdir_umask.
-	if test -n "$dir_arg"; then
-	  mkdir_mode=-m$mode
-	else
-	  mkdir_mode=
-	fi
-
-	posix_mkdir=false
-	case $umask in
-	  *[123567][0-7][0-7])
-	    # POSIX mkdir -p sets u+wx bits regardless of umask, which
-	    # is incompatible with FreeBSD 'install' when (umask & 300) != 0.
-	    ;;
-	  *)
-	    tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$
-	    trap 'ret=$?; rmdir "$tmpdir/d" "$tmpdir" 2>/dev/null; exit $ret' 0
-
-	    if (umask $mkdir_umask &&
-		exec $mkdirprog $mkdir_mode -p -- "$tmpdir/d") >/dev/null 2>&1
-	    then
-	      if test -z "$dir_arg" || {
-		   # Check for POSIX incompatibilities with -m.
-		   # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or
-		   # other-writeable bit of parent directory when it shouldn't.
-		   # FreeBSD 6.1 mkdir -m -p sets mode of existing directory.
-		   ls_ld_tmpdir=`ls -ld "$tmpdir"`
-		   case $ls_ld_tmpdir in
-		     d????-?r-*) different_mode=700;;
-		     d????-?--*) different_mode=755;;
-		     *) false;;
-		   esac &&
-		   $mkdirprog -m$different_mode -p -- "$tmpdir" && {
-		     ls_ld_tmpdir_1=`ls -ld "$tmpdir"`
-		     test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1"
-		   }
-		 }
-	      then posix_mkdir=:
-	      fi
-	      rmdir "$tmpdir/d" "$tmpdir"
-	    else
-	      # Remove any dirs left behind by ancient mkdir implementations.
-	      rmdir ./$mkdir_mode ./-p ./-- 2>/dev/null
-	    fi
-	    trap '' 0;;
-	esac;;
-    esac
-
-    if
-      $posix_mkdir && (
-	umask $mkdir_umask &&
-	$doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir"
-      )
-    then :
-    else
-
-      # The umask is ridiculous, or mkdir does not conform to POSIX,
-      # or it failed possibly due to a race condition.  Create the
-      # directory the slow way, step by step, checking for races as we go.
-
-      case $dstdir in
-	/*) prefix=/ ;;
-	-*) prefix=./ ;;
-	*)  prefix= ;;
-      esac
-
-      case $posix_glob in
-        '')
-	  if (set -f) 2>/dev/null; then
-	    posix_glob=true
-	  else
-	    posix_glob=false
-	  fi ;;
-      esac
-
-      oIFS=$IFS
-      IFS=/
-      $posix_glob && set -f
-      set fnord $dstdir
-      shift
-      $posix_glob && set +f
-      IFS=$oIFS
-
-      prefixes=
-
-      for d
-      do
-	test -z "$d" && continue
-
-	prefix=$prefix$d
-	if test -d "$prefix"; then
-	  prefixes=
-	else
-	  if $posix_mkdir; then
-	    (umask=$mkdir_umask &&
-	     $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break
-	    # Don't fail if two instances are running concurrently.
-	    test -d "$prefix" || exit 1
-	  else
-	    case $prefix in
-	      *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;;
-	      *) qprefix=$prefix;;
-	    esac
-	    prefixes="$prefixes '$qprefix'"
-	  fi
-	fi
-	prefix=$prefix/
-      done
-
-      if test -n "$prefixes"; then
-	# Don't fail if two instances are running concurrently.
-	(umask $mkdir_umask &&
-	 eval "\$doit_exec \$mkdirprog $prefixes") ||
-	  test -d "$dstdir" || exit 1
-	obsolete_mkdir_used=true
-      fi
-    fi
-  fi
-
-  if test -n "$dir_arg"; then
-    { test -z "$chowncmd" || $doit $chowncmd "$dst"; } &&
-    { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } &&
-    { test "$obsolete_mkdir_used$chowncmd$chgrpcmd" = false ||
-      test -z "$chmodcmd" || $doit $chmodcmd $mode "$dst"; } || exit 1
-  else
-
-    # Make a couple of temp file names in the proper directory.
-    dsttmp=$dstdir/_inst.$$_
-    rmtmp=$dstdir/_rm.$$_
-
-    # Trap to clean up those temp files at exit.
-    trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0
-
-    # Copy the file name to the temp name.
-    (umask $cp_umask && $doit_exec $cpprog "$src" "$dsttmp") &&
-
-    # and set any options; do chmod last to preserve setuid bits.
-    #
-    # If any of these fail, we abort the whole thing.  If we want to
-    # ignore errors from any of these, just make sure not to ignore
-    # errors from the above "$doit $cpprog $src $dsttmp" command.
-    #
-    { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } \
-      && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } \
-      && { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } \
-      && { test -z "$chmodcmd" || $doit $chmodcmd $mode "$dsttmp"; } &&
-
-    # Now rename the file to the real destination.
-    { $doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null \
-      || {
-	   # The rename failed, perhaps because mv can't rename something else
-	   # to itself, or perhaps because mv is so ancient that it does not
-	   # support -f.
-
-	   # Now remove or move aside any old file at destination location.
-	   # We try this two ways since rm can't unlink itself on some
-	   # systems and the destination file might be busy for other
-	   # reasons.  In this case, the final cleanup might fail but the new
-	   # file should still install successfully.
-	   {
-	     if test -f "$dst"; then
-	       $doit $rmcmd -f "$dst" 2>/dev/null \
-	       || { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null \
-		     && { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; }; }\
-	       || {
-		 echo "$0: cannot unlink or rename $dst" >&2
-		 (exit 1); exit 1
-	       }
-	     else
-	       :
-	     fi
-	   } &&
-
-	   # Now rename the file to the real destination.
-	   $doit $mvcmd "$dsttmp" "$dst"
-	 }
-    } || exit 1
-
-    trap '' 0
-  fi
-done
-
-# Local variables:
-# eval: (add-hook 'write-file-hooks 'time-stamp)
-# time-stamp-start: "scriptversion="
-# time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-end: "$"
-# End:
diff -Nru /tmp/bxdedfLB6u/uriparser-0.6.0/doc/Mainpage /tmp/fLjZ2dz9P3/uriparser-0.7.4/doc/Mainpage
--- uriparser-0.6.0/doc/Mainpage	1970-01-01 01:00:00.000000000 +0100
+++ uriparser-0.7.4/doc/Mainpage	2008-12-20 18:52:47.000000000 +0000
@@ -0,0 +1,343 @@
+/**
+ * @mainpage
+ *
+ * @section SEC_TOC Table of Contents
+ * - <a href="#intro">Introduction</a>
+ * - Algorithms and Examples
+ *   - <a href="#parsing">Parsing URIs</a> (from string to object)
+ *   - <a href="#recomposition">Recomposing URIs</a> (from object back to string)
+ *   - <a href="#resolution">Resolving References</a>
+ *   - <a href="#shortening">Creating References</a>
+ *   - <a href="#filenames">Filenames and URIs</a>
+ *   - <a href="#normalization">Normalizing URIs</a>
+ *   - <a href="#querystrings">Working with query strings</a>
+ * - <a href="#chartypes">Ansi and Unicode</a>
+ * - <a href="#autoconf">Autoconf Check</a>
+ *
+ *
+ * @section intro Introduction
+ * Welcome to the short uriparser integration tutorial.
+ * It is intended to answer upcoming questions and to shed light
+ * where function prototypes alone are not enough.
+ * Please drop me a line if you need further assistance and I will
+ * see what I can do for you. Good luck with uriparser!
+ *
+ *
+ * @subsection parsing Parsing URIs (from string to object)
+ * Parsing a URI with uriparser looks like this:
+ *
+ * @code
+ * 	UriParserStateA state;
+ * 	UriUriA uri;
+ *
+ * 	state.uri = &uri;
+ * 	if (uriParseUriA(&state, "file:///home/user/song.mp3") != URI_SUCCESS) {
+ * 		/COMMENT_HACK* Failure *COMMENT_HACK/
+ * 		uriFreeUriMembersA(&uri);
+ * 		...
+ * 	}
+ * 	...
+ * 	uriFreeUriMembersA(&uri);
+ * @endcode
+ *
+ * While the URI object (::UriUriA) holds information about the recogized
+ * parts of the given URI string, the parser state object (::UriParserStateA)
+ * keeps error code and position. This information does not belong to
+ * the URI itself, which is why there are two seperate objects.
+ *
+ * You can reuse parser state objects for parsing several URIs like this:
+ *
+ * @code
+ * 	UriParserStateA state;
+ * 	UriUriA uriOne;
+ * 	UriUriA uriTwo;
+ *
+ * 	state.uri = &uriOne;
+ * 	if (uriParseUriA(&state, "file:///home/user/one") != URI_SUCCESS) {
+ * 		/COMMENT_HACK* Failure *COMMENT_HACK/
+ * 		uriFreeUriMembersA(&uriOne);
+ * 		...
+ * 	}
+ * 	...
+ * 	state.uri = &uriTwo;
+ * 	if (uriParseUriA(&state, "file:///home/user/two") != URI_SUCCESS) {
+ * 		/COMMENT_HACK* Failure *COMMENT_HACK/
+ * 		uriFreeUriMembersA(&uriOne);
+ * 		uriFreeUriMembersA(&uriTwo);
+ * 		...
+ * 	}
+ * 	...
+ * 	uriFreeUriMembersA(&uriOne);
+ * 	uriFreeUriMembersA(&uriTwo);
+ * @endcode
+ *
+ *
+ * @subsection recomposition Recomposing URIs (from object back to string)
+ * According to <a href="http://tools.ietf.org/html/rfc3986#section-5.3" target="_blank">RFC 3986</a>
+ * glueing parts of a URI together to form a string is called recomposition.
+ * Before we can recompose a URI object we have to know how much
+ * space the resulting string will take:
+ *
+ * @code
+ * 	UriUriA uri;
+ * 	char * uriString;
+ * 	int charsRequired;
+ * 	...
+ * 	if (uriToStringCharsRequiredA(&uri, &charsRequired) != URI_SUCCESS) {
+ * 		/COMMENT_HACK* Failure *COMMENT_HACK/
+ * 		...
+ * 	}
+ * 	charsRequired++;
+ * @endcode
+ *
+ * Now we can tell uriToStringA() to write the string to a given buffer:
+ *
+ * @code
+ * 	uriString = malloc(charsRequired * sizeof(char));
+ * 	if (uriString == NULL) {
+ * 		/COMMENT_HACK* Failure *COMMENT_HACK/
+ * 		...
+ * 	}
+ * 	if (uriToStringA(uriString, &uri, charsRequired, NULL) != URI_SUCCESS) {
+ * 		/COMMENT_HACK* Failure *COMMENT_HACK/
+ * 		...
+ * 	}
+ * @endcode
+ *
+ * @remarks
+ * Incrementing <c>charsRequired</c> by 1 is required since
+ * uriToStringCharsRequiredA() returns the length of the string
+ * as strlen() does, but uriToStringA() works with the number
+ * of maximum characters to be written <b>including</b> the
+ * zero-terminator.
+ *
+ *
+ * @subsection resolution Resolving References
+ * <a href="http://tools.ietf.org/html/rfc3986#section-5" target="_blank">Reference Resolution</a>
+ * is the process of turning a (relative) URI reference into an absolute URI by applying a base
+ * URI to it. In code it looks like this:
+ *
+ * @code
+ * 	UriUriA absoluteDest;
+ * 	UriUriA relativeSource;
+ * 	UriUriA absoluteBase;
+ * 	...
+ * 	/COMMENT_HACK* relativeSource holds "../TWO" now *COMMENT_HACK/
+ * 	/COMMENT_HACK* absoluteBase holds "file:///one/two/three" now *COMMENT_HACK/
+ * 	if (uriAddBaseUriA(&absoluteDest, &relativeSource, &absoluteBase) != URI_SUCCESS) {
+ * 		/COMMENT_HACK* Failure *COMMENT_HACK/
+ * 		uriFreeUriMembersA(&absoluteDest);
+ * 		...
+ * 	}
+ * 	/COMMENT_HACK* absoluteDest holds "file:///one/TWO" now *COMMENT_HACK/
+ * 	...
+ * 	uriFreeUriMembersA(&absoluteDest);
+ * @endcode
+ *
+ * @remarks
+ * uriAddBaseUriA() does not normalize the resulting URI.
+ * Usually you might want to pass it through uriNormalizeSyntaxA() after.
+ *
+ *
+ * @subsection shortening Creating References
+ * Reference Creation is the inverse process of Reference Resolution: A common base URI
+ * is &quot;substracted&quot; from an absolute URI to make a (relative) reference.
+ * If the base URI is not common the remaining URI will still be absolute, i.e. will
+ * carry a scheme
+ *
+ * @code
+ * 	UriUriA dest;
+ * 	UriUriA absoluteSource;
+ * 	UriUriA absoluteBase;
+ * 	...
+ * 	/COMMENT_HACK* absoluteSource holds "file:///one/TWO" now *COMMENT_HACK/
+ * 	/COMMENT_HACK* absoluteBase holds "file:///one/two/three" now *COMMENT_HACK/
+ * 	if (uriRemoveBaseUriA(&dest, &absoluteSource, &absoluteBase, URI_FALSE) != URI_SUCCESS) {
+ * 		/COMMENT_HACK* Failure *COMMENT_HACK/
+ * 		uriFreeUriMembersA(&dest);
+ * 		...
+ * 	}
+ * 	/COMMENT_HACK* dest holds "../TWO" now *COMMENT_HACK/
+ * 	...
+ * 	uriFreeUriMembersA(&dest);
+ * @endcode
+ *
+ * The fourth parameter is the domain root mode. With <c>URI_FALSE</c> as above this will produce
+ * URIs relative to the base URI. With <c>URI_TRUE</c> the resulting URI will be relative to the
+ * domain root instead, e.g. &quot;/one/TWO&quot; in this case.
+ *
+ *
+ * @subsection filenames Filenames and URIs
+ * Converting filenames to and from URIs works on strings directly,
+ * i.e. without creating an URI object. 
+ *
+ * @code
+ * 	const char * const absFilename = "E:\\Documents and Settings";
+ * 	const int bytesNeeded = 8 + 3 * strlen(absFilename) + 1;
+ * 	char * absUri = malloc(bytesNeeded * sizeof(char));
+ * 	if (uriWindowsFilenameToUriStringA(absFilename, absUri) != URI_SUCCESS) {
+ * 		/COMMENT_HACK* Failure *COMMENT_HACK/
+ * 		free(absUri);
+ * 		...
+ * 	}
+ * 	/COMMENT_HACK* absUri is "file:///E:/Documents%20and%20Settings" now *COMMENT_HACK/
+ * 	...
+ * 	free(absUri);
+ * @endcode
+ *
+ * Conversion works ..
+ * - for relative or absolute values,
+ * - in both directions (filenames &lt;--&gt; URIs) and
+ * - with Unix and Windows filenames.
+ *
+ * All you have to do is to choose the right function for the task and allocate
+ * the required space (in characters) for the target buffer.
+ * Let me present you an overview:
+ *
+ * - Filename --&gt; URI
+ *   - uriUnixFilenameToUriStringA()\n
+ *     Space required: [<b>7</b> +] 3 * len(filename) + 1 
+ *   - uriWindowsFilenameToUriStringA()\n
+ *     Space required: [<b>8</b> +] 3 * len(filename) + 1
+ * - URI --&gt; filename
+ *   - uriUriStringToUnixFilenameA()\n
+ *     Space required: len(uriString) + 1 [- <b>7]</b>
+ *   - uriUriStringToWindowsFilenameA()\n
+ *     Space required: len(uriString) + 1 [- <b>8]</b>
+ *
+ *
+ * @subsection normalization Normalizing URIs
+ * Sometimes we come accross unnecessarily long URIs like &quot;http<b></b>://example.org/one/two/../../one&quot;.
+ * The algorithm we can use to shorten this URI down to &quot;http<b></b>://example.org/one&quot; is called
+ * <a href="http://tools.ietf.org/html/rfc3986#section-6.2.2" target="_blank">Syntax-Based Normalization</a>.
+ * Note that normalizing a URI does more than just &quot;stripping dot segments&quot;. Please have a look at
+ * <a href="http://tools.ietf.org/html/rfc3986#section-6.2.2" target="_blank">Section 6.2.2 of RFC 3986</a>
+ * for the full description.
+ *
+ * As we asked uriToStringCharsRequiredA() for the required space when converting
+ * a URI object back to a sring, we can ask uriNormalizeSyntaxMaskRequiredA() for
+ * the parts of a URI that require normalization and then pass this normalization
+ * mask to uriNormalizeSyntaxExA():
+ *
+ * @code
+ * 	const unsigned int dirtyParts = uriNormalizeSyntaxMaskRequiredA(&uri);
+ * 	if (uriNormalizeSyntaxExA(&uri, dirtyParts) != URI_SUCCESS) {
+ * 		/COMMENT_HACK* Failure *COMMENT_HACK/
+ * 		...
+ * 	}
+ * @endcode
+ *
+ * If you don't want to normalize all parts of the URI you can pass a custom
+ * mask as well:
+ *
+ * @code
+ * 	const unsigned int normMask = URI_NORMALIZE_SCHEME | URI_NORMALIZE_USER_INFO;
+ * 	if (uriNormalizeSyntaxExA(&uri, normMask) != URI_SUCCESS) {
+ * 		/COMMENT_HACK* Failure *COMMENT_HACK/
+ * 		...
+ * 	}
+ * @endcode
+ *
+ * Please see ::UriNormalizationMaskEnum for the complete set of flags.
+ *
+ * On the other hand calling plain uriNormalizeSyntaxA() (without the &quot;Ex&quot;)
+ * saves you thinking about single parts, as it queries uriNormalizeSyntaxMaskRequiredA()
+ * internally:
+ *
+ * @code
+ * 	if (uriNormalizeSyntaxA(&uri) != URI_SUCCESS) {
+ * 		/COMMENT_HACK* Failure *COMMENT_HACK/
+ * 		...
+ * 	}
+ * @endcode
+ *
+ *
+ * @section querystrings Working with query strings
+ * <a href="http://tools.ietf.org/html/rfc3986" target="_blank">RFC 3986</a>
+ * itself does not understand the query part of a URI as a list of key/value pairs.
+ * But HTML 2.0 does and defines a media type <i>application/x-www-form-urlencoded</i>
+ * in in <a href="http://tools.ietf.org/html/rfc1866#section-8.2.1" target="blank">section 8.2.1</a>
+ * of <a href="http://tools.ietf.org/html/rfc1866" target="blank">RFC 1866</a>.
+ * uriparser allows you to dissect (or parse) a query string into unescaped key/value pairs
+ * and back.
+ *
+ * To dissect the query part of a just-parsed URI you could write code like this:
+ * 
+ * @code
+ * 	UriUriA uri;
+ * 	UriQueryListA * queryList;
+ * 	int itemCount;
+ * 	...
+ * 	if (uriDissectQueryMallocA(&queryList, &itemCount, uri.query.first,
+ * 			uri.query.afterLast) != URI_SUCCESS) {
+ * 		/COMMENT_HACK* Failure *COMMENT_HACK/
+ * 		...
+ * 	}
+ * 	...
+ * 	uriFreeQueryListA(queryList);
+ * @endcode
+ *
+ * @remarks
+ * - <c>NULL</c> in the <c>value</c> member means there was <b>no</b> '=' in the item text as with "?abc&def".
+ * - An empty string in the <c>value</c> member means there was '=' in the item as with "?abc=&def".
+ *
+ *
+ * To compose a query string from a query list you could write code like this:
+ *
+ * @code
+ * 	int charsRequired;
+ * 	int charsWritten;
+ * 	char * queryString;
+ * 	...
+ * 	if (uriComposeQueryCharsRequiredA(queryList, &charsRequired) != URI_SUCCESS) {
+ * 		/COMMENT_HACK* Failure *COMMENT_HACK/
+ * 		...
+ * 	}
+ * 	queryString = malloc((charsRequired + 1) * sizeof(char));
+ * 	if (queryString == NULL) {
+ * 		/COMMENT_HACK* Failure *COMMENT_HACK/
+ * 		...
+ * 	}
+ * 	if (uriComposeQueryA(queryString, queryList, charsRequired + 1, &charsWritten) != URI_SUCCESS) {
+ * 		/COMMENT_HACK* Failure *COMMENT_HACK/
+ * 		...
+ * 	}
+ * 	...
+ * 	free(queryString);
+ * @endcode
+ *
+ *
+ * @section chartypes Ansi and Unicode
+ * uriparser comes with two versions of every structure and function:
+ * one handling Ansi text (char *) and one working with Unicode text (wchar_t *),
+ * for instance
+ * - uriParseUriA() for Ansi and
+ * - uriParseUriW() for Unicode.
+ *
+ * This tutorial only shows the usage of the Ansi editions but
+ * their Unicode counterparts work in the very same way.
+ *
+ *
+ * @section autoconf Autoconf Check
+ * You can use the code below to make <c>./configure</c> test for presence
+ * of uriparser 0.6.4 or later.
+ *
+ *<div class="fragment"><pre class="fragment">URIPARSER_MISSING=<span class="stringliteral">"Please install uriparser 0.6.4 or later.
+ *   On a Debian-based system enter 'sudo apt-get install liburiparser-dev'."</span>
+ *AC_CHECK_LIB(uriparser, uriParseUriA,, AC_MSG_ERROR(${URIPARSER_MISSING}))
+ *AC_CHECK_HEADER(uriparser/Uri.h,, AC_MSG_ERROR(${URIPARSER_MISSING}))
+ *<b></b>
+ *URIPARSER_TOO_OLD=<span class="stringliteral">"uriparser 0.6.4 or later is required, your copy is too old."</span>
+ *AC_COMPILE_IFELSE([
+ *<span class="preprocessor">\#include <uriparser/Uri.h>
+ *\#if (defined(URI_VER_MAJOR) && defined(URI_VER_MINOR) && defined(URI_VER_RELEASE) \\<b></b>
+ *&& ((URI_VER_MAJOR > 0) \\<b></b>
+ *|| ((URI_VER_MAJOR == 0) && (URI_VER_MINOR > 6)) \\<b></b>
+ *|| ((URI_VER_MAJOR == 0) && (URI_VER_MINOR == 6) && (URI_VER_RELEASE >= 4)) \\<b></b>
+ *))</span>
+ *<span class="comment"><b></b>/<b></b>* FINE *<b></b>/</span>
+ *<span class="preprocessor">\#else
+ *\# error uriparser not recent enough
+ *\#endif</span>
+ *],,AC_MSG_ERROR(${URIPARSER_TOO_OLD}))</pre></div>
+ */
diff -Nru /tmp/bxdedfLB6u/uriparser-0.6.0/doc/Makefile.am /tmp/fLjZ2dz9P3/uriparser-0.7.4/doc/Makefile.am
--- uriparser-0.6.0/doc/Makefile.am	2007-07-28 17:52:58.000000000 +0100
+++ uriparser-0.7.4/doc/Makefile.am	2008-12-23 02:01:21.000000000 +0000
@@ -1,22 +1,26 @@
-## Process this file with automake to produce Makefile.in
-AUTOMAKE_OPTIONS = foreign dist-zip no-dist-gzip
-
-noinst_SCRIPTS = phony_html_doc
-
-phony_html_doc :
-	rm -f html/*.css
-	rm -f html/*.gif
-	rm -f html/*.html
-	rm -f html/*.png
-	rm -f html/*.map
-	rm -f html/*.md5
-	rm -f html/graph_legend.dot
-	doxygen Doxyfile
-
-EXTRA_DIST = \
-	Doxyfile \
-	\
-	html/*.css \
-	html/*.gif \
-	html/*.html \
-	html/*.png
+## Process this file with automake to produce Makefile.in
+AUTOMAKE_OPTIONS = 1.10 foreign dist-zip no-dist-gzip
+
+
+noinst_SCRIPTS = phony_html_doc
+
+phony_html_doc :
+	rm -f html/*.css
+	rm -f html/*.gif
+	rm -f html/*.html
+	rm -f html/*.png
+	rm -f html/*.map
+	rm -f html/*.md5
+	rm -f html/graph_legend.dot
+	rm -f html/index.*
+	doxygen Doxyfile
+
+URI_DOC_FILES = \
+	html/*.css \
+	html/*.gif \
+	html/*.html \
+	html/*.png
+
+
+## Make doc files get installed
+nobase_nodist_doc_DATA = $(URI_DOC_FILES)
diff -Nru /tmp/bxdedfLB6u/uriparser-0.6.0/doc/Makefile.in /tmp/fLjZ2dz9P3/uriparser-0.7.4/doc/Makefile.in
--- uriparser-0.6.0/doc/Makefile.in	2007-07-28 17:55:45.000000000 +0100
+++ uriparser-0.7.4/doc/Makefile.in	2008-12-23 02:31:18.000000000 +0000
@@ -1,8 +1,8 @@
-# Makefile.in generated by automake 1.10 from Makefile.am.
+# Makefile.in generated by automake 1.10.1 from Makefile.am.
 # @configure_input@
 
 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006  Free Software Foundation, Inc.
+# 2003, 2004, 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -14,6 +14,7 @@
 
 @SET_MAKE@
 
+
 VPATH = @srcdir@
 pkgdatadir = $(datadir)/@PACKAGE@
 pkglibdir = $(libdir)/@PACKAGE@
@@ -30,55 +31,74 @@
 NORMAL_UNINSTALL = :
 PRE_UNINSTALL = :
 POST_UNINSTALL = :
-subdir = .
-DIST_COMMON = $(am__configure_deps) $(srcdir)/../install-sh \
-	$(srcdir)/../missing $(srcdir)/Makefile.am \
-	$(srcdir)/Makefile.in $(top_srcdir)/configure
+build_triplet = @build@
+host_triplet = @host@
+subdir = doc
+DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/configure.in
+am__aclocal_m4_deps = $(top_srcdir)/configure.ac
 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
 	$(ACLOCAL_M4)
-am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
- configure.lineno config.status.lineno
 mkinstalldirs = $(install_sh) -d
+CONFIG_HEADER = $(top_builddir)/test/CppTest/config.h
 CONFIG_CLEAN_FILES =
 SCRIPTS = $(noinst_SCRIPTS)
 SOURCES =
 DIST_SOURCES =
+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
+am__vpath_adj = case $$p in \
+    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
+    *) f=$$p;; \
+  esac;
+am__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
+am__installdirs = "$(DESTDIR)$(docdir)"
+nobase_nodist_docDATA_INSTALL = $(install_sh_DATA)
+DATA = $(nobase_nodist_doc_DATA)
 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-distdir = $(PACKAGE)-$(VERSION)
-top_distdir = $(distdir)
-am__remove_distdir = \
-  { test ! -d $(distdir) \
-    || { find $(distdir) -type d ! -perm -200 -exec chmod u+w {} ';' \
-         && rm -fr $(distdir); }; }
-GZIP_ENV = --best
-DIST_ARCHIVES = $(distdir).zip
-distuninstallcheck_listfiles = find . -type f -print
-distcleancheck_listfiles = find . -type f -print
 ACLOCAL = @ACLOCAL@
 AMTAR = @AMTAR@
+AR = @AR@
 AUTOCONF = @AUTOCONF@
 AUTOHEADER = @AUTOHEADER@
 AUTOMAKE = @AUTOMAKE@
 AWK = @AWK@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CXX = @CXX@
+CXXCPP = @CXXCPP@
+CXXDEPMODE = @CXXDEPMODE@
+CXXFLAGS = @CXXFLAGS@
 CYGPATH_W = @CYGPATH_W@
 DEFS = @DEFS@
-DOXY_CHECK = @DOXY_CHECK@
+DEPDIR = @DEPDIR@
+DSYMUTIL = @DSYMUTIL@
+ECHO = @ECHO@
 ECHO_C = @ECHO_C@
 ECHO_N = @ECHO_N@
 ECHO_T = @ECHO_T@
-GRAPHVIZ_CHECK = @GRAPHVIZ_CHECK@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+F77 = @F77@
+FFLAGS = @FFLAGS@
+GREP = @GREP@
 INSTALL = @INSTALL@
 INSTALL_DATA = @INSTALL_DATA@
 INSTALL_PROGRAM = @INSTALL_PROGRAM@
 INSTALL_SCRIPT = @INSTALL_SCRIPT@
 INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LDFLAGS = @LDFLAGS@
 LIBOBJS = @LIBOBJS@
 LIBS = @LIBS@
+LIBTOOL = @LIBTOOL@
+LN_S = @LN_S@
 LTLIBOBJS = @LTLIBOBJS@
 MAKEINFO = @MAKEINFO@
 MKDIR_P = @MKDIR_P@
+NMEDIT = @NMEDIT@
+OBJEXT = @OBJEXT@
 PACKAGE = @PACKAGE@
 PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
 PACKAGE_NAME = @PACKAGE_NAME@
@@ -86,6 +106,8 @@
 PACKAGE_TARNAME = @PACKAGE_TARNAME@
 PACKAGE_VERSION = @PACKAGE_VERSION@
 PATH_SEPARATOR = @PATH_SEPARATOR@
+RANLIB = @RANLIB@
+SED = @SED@
 SET_MAKE = @SET_MAKE@
 SHELL = @SHELL@
 STRIP = @STRIP@
@@ -94,18 +116,31 @@
 abs_srcdir = @abs_srcdir@
 abs_top_builddir = @abs_top_builddir@
 abs_top_srcdir = @abs_top_srcdir@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_CXX = @ac_ct_CXX@
+ac_ct_F77 = @ac_ct_F77@
+am__include = @am__include@
 am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
 am__tar = @am__tar@
 am__untar = @am__untar@
 bindir = @bindir@
+build = @build@
 build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
 builddir = @builddir@
 datadir = @datadir@
 datarootdir = @datarootdir@
 docdir = @docdir@
 dvidir = @dvidir@
 exec_prefix = @exec_prefix@
+host = @host@
 host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
 htmldir = @htmldir@
 includedir = @includedir@
 infodir = @infodir@
@@ -124,56 +159,77 @@
 sbindir = @sbindir@
 sharedstatedir = @sharedstatedir@
 srcdir = @srcdir@
+subdirs = @subdirs@
 sysconfdir = @sysconfdir@
 target_alias = @target_alias@
 top_builddir = @top_builddir@
 top_srcdir = @top_srcdir@
-AUTOMAKE_OPTIONS = foreign dist-zip no-dist-gzip
+AUTOMAKE_OPTIONS = 1.10 foreign dist-zip no-dist-gzip
 noinst_SCRIPTS = phony_html_doc
-EXTRA_DIST = \
-	Doxyfile \
-	\
+URI_DOC_FILES = \
 	html/*.css \
 	html/*.gif \
 	html/*.html \
 	html/*.png
 
+nobase_nodist_doc_DATA = $(URI_DOC_FILES)
 all: all-am
 
 .SUFFIXES:
-am--refresh:
-	@:
 $(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
 	@for dep in $?; do \
 	  case '$(am__configure_deps)' in \
 	    *$$dep*) \
-	      echo ' cd $(srcdir) && $(AUTOMAKE) --foreign '; \
-	      cd $(srcdir) && $(AUTOMAKE) --foreign  \
+	      cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
 		&& exit 0; \
 	      exit 1;; \
 	  esac; \
 	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign  Makefile'; \
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign  doc/Makefile'; \
 	cd $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign  Makefile
+	  $(AUTOMAKE) --foreign  doc/Makefile
 .PRECIOUS: Makefile
 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 	@case '$?' in \
 	  *config.status*) \
-	    echo ' $(SHELL) ./config.status'; \
-	    $(SHELL) ./config.status;; \
+	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
 	  *) \
-	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
-	    cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
 	esac;
 
 $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-	$(SHELL) ./config.status --recheck
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 
 $(top_srcdir)/configure:  $(am__configure_deps)
-	cd $(srcdir) && $(AUTOCONF)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 $(ACLOCAL_M4):  $(am__aclocal_m4_deps)
-	cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+mostlyclean-libtool:
+	-rm -f *.lo
+
+clean-libtool:
+	-rm -rf .libs _libs
+install-nobase_nodist_docDATA: $(nobase_nodist_doc_DATA)
+	@$(NORMAL_INSTALL)
+	test -z "$(docdir)" || $(MKDIR_P) "$(DESTDIR)$(docdir)"
+	@$(am__vpath_adj_setup) \
+	list='$(nobase_nodist_doc_DATA)'; for p in $$list; do \
+	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+	  $(am__vpath_adj) \
+	  echo " $(nobase_nodist_docDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(docdir)/$$f'"; \
+	  $(nobase_nodist_docDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(docdir)/$$f"; \
+	done
+
+uninstall-nobase_nodist_docDATA:
+	@$(NORMAL_UNINSTALL)
+	@$(am__vpath_adj_setup) \
+	list='$(nobase_nodist_doc_DATA)'; for p in $$list; do \
+	  $(am__vpath_adj) \
+	  echo " rm -f '$(DESTDIR)$(docdir)/$$f'"; \
+	  rm -f "$(DESTDIR)$(docdir)/$$f"; \
+	done
 tags: TAGS
 TAGS:
 
@@ -182,8 +238,6 @@
 
 
 distdir: $(DISTFILES)
-	$(am__remove_distdir)
-	test -d $(distdir) || mkdir $(distdir)
 	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
 	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
 	list='$(DISTFILES)'; \
@@ -209,107 +263,13 @@
 	    || exit 1; \
 	  fi; \
 	done
-	-find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \
-	  ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
-	  ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
-	  ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
-	|| chmod -R a+r $(distdir)
-dist-gzip: distdir
-	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
-	$(am__remove_distdir)
-
-dist-bzip2: distdir
-	tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2
-	$(am__remove_distdir)
-
-dist-tarZ: distdir
-	tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
-	$(am__remove_distdir)
-
-dist-shar: distdir
-	shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
-	$(am__remove_distdir)
-dist-zip: distdir
-	-rm -f $(distdir).zip
-	zip -rq $(distdir).zip $(distdir)
-	$(am__remove_distdir)
-
-dist dist-all: distdir
-	-rm -f $(distdir).zip
-	zip -rq $(distdir).zip $(distdir)
-	$(am__remove_distdir)
-
-# This target untars the dist file and tries a VPATH configuration.  Then
-# it guarantees that the distribution is self-contained by making another
-# tarfile.
-distcheck: dist
-	case '$(DIST_ARCHIVES)' in \
-	*.tar.gz*) \
-	  GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(am__untar) ;;\
-	*.tar.bz2*) \
-	  bunzip2 -c $(distdir).tar.bz2 | $(am__untar) ;;\
-	*.tar.Z*) \
-	  uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
-	*.shar.gz*) \
-	  GZIP=$(GZIP_ENV) gunzip -c $(distdir).shar.gz | unshar ;;\
-	*.zip*) \
-	  unzip $(distdir).zip ;;\
-	esac
-	chmod -R a-w $(distdir); chmod a+w $(distdir)
-	mkdir $(distdir)/_build
-	mkdir $(distdir)/_inst
-	chmod a-w $(distdir)
-	dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
-	  && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
-	  && cd $(distdir)/_build \
-	  && ../configure --srcdir=.. --prefix="$$dc_install_base" \
-	    $(DISTCHECK_CONFIGURE_FLAGS) \
-	  && $(MAKE) $(AM_MAKEFLAGS) \
-	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
-	  && $(MAKE) $(AM_MAKEFLAGS) check \
-	  && $(MAKE) $(AM_MAKEFLAGS) install \
-	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
-	  && $(MAKE) $(AM_MAKEFLAGS) uninstall \
-	  && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
-	        distuninstallcheck \
-	  && chmod -R a-w "$$dc_install_base" \
-	  && ({ \
-	       (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
-	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
-	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
-	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
-	            distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
-	      } || { rm -rf "$$dc_destdir"; exit 1; }) \
-	  && rm -rf "$$dc_destdir" \
-	  && $(MAKE) $(AM_MAKEFLAGS) dist \
-	  && rm -rf $(DIST_ARCHIVES) \
-	  && $(MAKE) $(AM_MAKEFLAGS) distcleancheck
-	$(am__remove_distdir)
-	@(echo "$(distdir) archives ready for distribution: "; \
-	  list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
-	  sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
-distuninstallcheck:
-	@cd $(distuninstallcheck_dir) \
-	&& test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \
-	   || { echo "ERROR: files left after uninstall:" ; \
-	        if test -n "$(DESTDIR)"; then \
-	          echo "  (check DESTDIR support)"; \
-	        fi ; \
-	        $(distuninstallcheck_listfiles) ; \
-	        exit 1; } >&2
-distcleancheck: distclean
-	@if test '$(srcdir)' = . ; then \
-	  echo "ERROR: distcleancheck can only run from a VPATH build" ; \
-	  exit 1 ; \
-	fi
-	@test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
-	  || { echo "ERROR: files left in build directory after distclean:" ; \
-	       $(distcleancheck_listfiles) ; \
-	       exit 1; } >&2
 check-am: all-am
 check: check-am
-all-am: Makefile $(SCRIPTS)
+all-am: Makefile $(SCRIPTS) $(DATA)
 installdirs:
+	for dir in "$(DESTDIR)$(docdir)"; do \
+	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
+	done
 install: install-am
 install-exec: install-exec-am
 install-data: install-data-am
@@ -336,10 +296,9 @@
 	@echo "it deletes files that may require special tools to rebuild."
 clean: clean-am
 
-clean-am: clean-generic mostlyclean-am
+clean-am: clean-generic clean-libtool mostlyclean-am
 
 distclean: distclean-am
-	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
 	-rm -f Makefile
 distclean-am: clean-am distclean-generic
 
@@ -353,7 +312,7 @@
 
 info-am:
 
-install-data-am:
+install-data-am: install-nobase_nodist_docDATA
 
 install-dvi: install-dvi-am
 
@@ -372,14 +331,12 @@
 installcheck-am:
 
 maintainer-clean: maintainer-clean-am
-	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
-	-rm -rf $(top_srcdir)/autom4te.cache
 	-rm -f Makefile
 maintainer-clean-am: distclean-am maintainer-clean-generic
 
 mostlyclean: mostlyclean-am
 
-mostlyclean-am: mostlyclean-generic
+mostlyclean-am: mostlyclean-generic mostlyclean-libtool
 
 pdf: pdf-am
 
@@ -389,21 +346,22 @@
 
 ps-am:
 
-uninstall-am:
+uninstall-am: uninstall-nobase_nodist_docDATA
 
 .MAKE: install-am install-strip
 
-.PHONY: all all-am am--refresh check check-am clean clean-generic dist \
-	dist-all dist-bzip2 dist-gzip dist-shar dist-tarZ dist-zip \
-	distcheck distclean distclean-generic distcleancheck distdir \
-	distuninstallcheck dvi dvi-am html html-am info info-am \
-	install install-am install-data install-data-am install-dvi \
-	install-dvi-am install-exec install-exec-am install-html \
-	install-html-am install-info install-info-am install-man \
-	install-pdf install-pdf-am install-ps install-ps-am \
-	install-strip installcheck installcheck-am installdirs \
-	maintainer-clean maintainer-clean-generic mostlyclean \
-	mostlyclean-generic pdf pdf-am ps ps-am uninstall uninstall-am
+.PHONY: all all-am check check-am clean clean-generic clean-libtool \
+	distclean distclean-generic distclean-libtool distdir dvi \
+	dvi-am html html-am info info-am install install-am \
+	install-data install-data-am install-dvi install-dvi-am \
+	install-exec install-exec-am install-html install-html-am \
+	install-info install-info-am install-man \
+	install-nobase_nodist_docDATA install-pdf install-pdf-am \
+	install-ps install-ps-am install-strip installcheck \
+	installcheck-am installdirs maintainer-clean \
+	maintainer-clean-generic mostlyclean mostlyclean-generic \
+	mostlyclean-libtool pdf pdf-am ps ps-am uninstall uninstall-am \
+	uninstall-nobase_nodist_docDATA
 
 
 phony_html_doc :
@@ -414,6 +372,7 @@
 	rm -f html/*.map
 	rm -f html/*.md5
 	rm -f html/graph_legend.dot
+	rm -f html/index.*
 	doxygen Doxyfile
 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 # Otherwise a system limit (for SysV at least) may be exceeded.
diff -Nru /tmp/bxdedfLB6u/uriparser-0.6.0/doc/missing /tmp/fLjZ2dz9P3/uriparser-0.7.4/doc/missing
--- uriparser-0.6.0/doc/missing	2007-07-06 00:26:55.000000000 +0100
+++ uriparser-0.7.4/doc/missing	1970-01-01 01:00:00.000000000 +0100
@@ -1,367 +0,0 @@
-#! /bin/sh
-# Common stub for a few missing GNU programs while installing.
-
-scriptversion=2006-05-10.23
-
-# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005, 2006
-#   Free Software Foundation, Inc.
-# Originally by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
-# 02110-1301, USA.
-
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-if test $# -eq 0; then
-  echo 1>&2 "Try \`$0 --help' for more information"
-  exit 1
-fi
-
-run=:
-sed_output='s/.* --output[ =]\([^ ]*\).*/\1/p'
-sed_minuso='s/.* -o \([^ ]*\).*/\1/p'
-
-# In the cases where this matters, `missing' is being run in the
-# srcdir already.
-if test -f configure.ac; then
-  configure_ac=configure.ac
-else
-  configure_ac=configure.in
-fi
-
-msg="missing on your system"
-
-case $1 in
---run)
-  # Try to run requested program, and just exit if it succeeds.
-  run=
-  shift
-  "$@" && exit 0
-  # Exit code 63 means version mismatch.  This often happens
-  # when the user try to use an ancient version of a tool on
-  # a file that requires a minimum version.  In this case we
-  # we should proceed has if the program had been absent, or
-  # if --run hadn't been passed.
-  if test $? = 63; then
-    run=:
-    msg="probably too old"
-  fi
-  ;;
-
-  -h|--h|--he|--hel|--help)
-    echo "\
-$0 [OPTION]... PROGRAM [ARGUMENT]...
-
-Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an
-error status if there is no known handling for PROGRAM.
-
-Options:
-  -h, --help      display this help and exit
-  -v, --version   output version information and exit
-  --run           try to run the given command, and emulate it if it fails
-
-Supported PROGRAM values:
-  aclocal      touch file \`aclocal.m4'
-  autoconf     touch file \`configure'
-  autoheader   touch file \`config.h.in'
-  autom4te     touch the output file, or create a stub one
-  automake     touch all \`Makefile.in' files
-  bison        create \`y.tab.[ch]', if possible, from existing .[ch]
-  flex         create \`lex.yy.c', if possible, from existing .c
-  help2man     touch the output file
-  lex          create \`lex.yy.c', if possible, from existing .c
-  makeinfo     touch the output file
-  tar          try tar, gnutar, gtar, then tar without non-portable flags
-  yacc         create \`y.tab.[ch]', if possible, from existing .[ch]
-
-Send bug reports to <bug-automake@gnu.org>."
-    exit $?
-    ;;
-
-  -v|--v|--ve|--ver|--vers|--versi|--versio|--version)
-    echo "missing $scriptversion (GNU Automake)"
-    exit $?
-    ;;
-
-  -*)
-    echo 1>&2 "$0: Unknown \`$1' option"
-    echo 1>&2 "Try \`$0 --help' for more information"
-    exit 1
-    ;;
-
-esac
-
-# Now exit if we have it, but it failed.  Also exit now if we
-# don't have it and --version was passed (most likely to detect
-# the program).
-case $1 in
-  lex|yacc)
-    # Not GNU programs, they don't have --version.
-    ;;
-
-  tar)
-    if test -n "$run"; then
-       echo 1>&2 "ERROR: \`tar' requires --run"
-       exit 1
-    elif test "x$2" = "x--version" || test "x$2" = "x--help"; then
-       exit 1
-    fi
-    ;;
-
-  *)
-    if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
-       # We have it, but it failed.
-       exit 1
-    elif test "x$2" = "x--version" || test "x$2" = "x--help"; then
-       # Could not run --version or --help.  This is probably someone
-       # running `$TOOL --version' or `$TOOL --help' to check whether
-       # $TOOL exists and not knowing $TOOL uses missing.
-       exit 1
-    fi
-    ;;
-esac
-
-# If it does not exist, or fails to run (possibly an outdated version),
-# try to emulate it.
-case $1 in
-  aclocal*)
-    echo 1>&2 "\
-WARNING: \`$1' is $msg.  You should only need it if
-         you modified \`acinclude.m4' or \`${configure_ac}'.  You might want
-         to install the \`Automake' and \`Perl' packages.  Grab them from
-         any GNU archive site."
-    touch aclocal.m4
-    ;;
-
-  autoconf)
-    echo 1>&2 "\
-WARNING: \`$1' is $msg.  You should only need it if
-         you modified \`${configure_ac}'.  You might want to install the
-         \`Autoconf' and \`GNU m4' packages.  Grab them from any GNU
-         archive site."
-    touch configure
-    ;;
-
-  autoheader)
-    echo 1>&2 "\
-WARNING: \`$1' is $msg.  You should only need it if
-         you modified \`acconfig.h' or \`${configure_ac}'.  You might want
-         to install the \`Autoconf' and \`GNU m4' packages.  Grab them
-         from any GNU archive site."
-    files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' ${configure_ac}`
-    test -z "$files" && files="config.h"
-    touch_files=
-    for f in $files; do
-      case $f in
-      *:*) touch_files="$touch_files "`echo "$f" |
-				       sed -e 's/^[^:]*://' -e 's/:.*//'`;;
-      *) touch_files="$touch_files $f.in";;
-      esac
-    done
-    touch $touch_files
-    ;;
-
-  automake*)
-    echo 1>&2 "\
-WARNING: \`$1' is $msg.  You should only need it if
-         you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'.
-         You might want to install the \`Automake' and \`Perl' packages.
-         Grab them from any GNU archive site."
-    find . -type f -name Makefile.am -print |
-	   sed 's/\.am$/.in/' |
-	   while read f; do touch "$f"; done
-    ;;
-
-  autom4te)
-    echo 1>&2 "\
-WARNING: \`$1' is needed, but is $msg.
-         You might have modified some files without having the
-         proper tools for further handling them.
-         You can get \`$1' as part of \`Autoconf' from any GNU
-         archive site."
-
-    file=`echo "$*" | sed -n "$sed_output"`
-    test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
-    if test -f "$file"; then
-	touch $file
-    else
-	test -z "$file" || exec >$file
-	echo "#! /bin/sh"
-	echo "# Created by GNU Automake missing as a replacement of"
-	echo "#  $ $@"
-	echo "exit 0"
-	chmod +x $file
-	exit 1
-    fi
-    ;;
-
-  bison|yacc)
-    echo 1>&2 "\
-WARNING: \`$1' $msg.  You should only need it if
-         you modified a \`.y' file.  You may need the \`Bison' package
-         in order for those modifications to take effect.  You can get
-         \`Bison' from any GNU archive site."
-    rm -f y.tab.c y.tab.h
-    if test $# -ne 1; then
-        eval LASTARG="\${$#}"
-	case $LASTARG in
-	*.y)
-	    SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'`
-	    if test -f "$SRCFILE"; then
-	         cp "$SRCFILE" y.tab.c
-	    fi
-	    SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'`
-	    if test -f "$SRCFILE"; then
-	         cp "$SRCFILE" y.tab.h
-	    fi
-	  ;;
-	esac
-    fi
-    if test ! -f y.tab.h; then
-	echo >y.tab.h
-    fi
-    if test ! -f y.tab.c; then
-	echo 'main() { return 0; }' >y.tab.c
-    fi
-    ;;
-
-  lex|flex)
-    echo 1>&2 "\
-WARNING: \`$1' is $msg.  You should only need it if
-         you modified a \`.l' file.  You may need the \`Flex' package
-         in order for those modifications to take effect.  You can get
-         \`Flex' from any GNU archive site."
-    rm -f lex.yy.c
-    if test $# -ne 1; then
-        eval LASTARG="\${$#}"
-	case $LASTARG in
-	*.l)
-	    SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'`
-	    if test -f "$SRCFILE"; then
-	         cp "$SRCFILE" lex.yy.c
-	    fi
-	  ;;
-	esac
-    fi
-    if test ! -f lex.yy.c; then
-	echo 'main() { return 0; }' >lex.yy.c
-    fi
-    ;;
-
-  help2man)
-    echo 1>&2 "\
-WARNING: \`$1' is $msg.  You should only need it if
-	 you modified a dependency of a manual page.  You may need the
-	 \`Help2man' package in order for those modifications to take
-	 effect.  You can get \`Help2man' from any GNU archive site."
-
-    file=`echo "$*" | sed -n "$sed_output"`
-    test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
-    if test -f "$file"; then
-	touch $file
-    else
-	test -z "$file" || exec >$file
-	echo ".ab help2man is required to generate this page"
-	exit 1
-    fi
-    ;;
-
-  makeinfo)
-    echo 1>&2 "\
-WARNING: \`$1' is $msg.  You should only need it if
-         you modified a \`.texi' or \`.texinfo' file, or any other file
-         indirectly affecting the aspect of the manual.  The spurious
-         call might also be the consequence of using a buggy \`make' (AIX,
-         DU, IRIX).  You might want to install the \`Texinfo' package or
-         the \`GNU make' package.  Grab either from any GNU archive site."
-    # The file to touch is that specified with -o ...
-    file=`echo "$*" | sed -n "$sed_output"`
-    test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
-    if test -z "$file"; then
-      # ... or it is the one specified with @setfilename ...
-      infile=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'`
-      file=`sed -n '
-	/^@setfilename/{
-	  s/.* \([^ ]*\) *$/\1/
-	  p
-	  q
-	}' $infile`
-      # ... or it is derived from the source name (dir/f.texi becomes f.info)
-      test -z "$file" && file=`echo "$infile" | sed 's,.*/,,;s,.[^.]*$,,'`.info
-    fi
-    # If the file does not exist, the user really needs makeinfo;
-    # let's fail without touching anything.
-    test -f $file || exit 1
-    touch $file
-    ;;
-
-  tar)
-    shift
-
-    # We have already tried tar in the generic part.
-    # Look for gnutar/gtar before invocation to avoid ugly error
-    # messages.
-    if (gnutar --version > /dev/null 2>&1); then
-       gnutar "$@" && exit 0
-    fi
-    if (gtar --version > /dev/null 2>&1); then
-       gtar "$@" && exit 0
-    fi
-    firstarg="$1"
-    if shift; then
-	case $firstarg in
-	*o*)
-	    firstarg=`echo "$firstarg" | sed s/o//`
-	    tar "$firstarg" "$@" && exit 0
-	    ;;
-	esac
-	case $firstarg in
-	*h*)
-	    firstarg=`echo "$firstarg" | sed s/h//`
-	    tar "$firstarg" "$@" && exit 0
-	    ;;
-	esac
-    fi
-
-    echo 1>&2 "\
-WARNING: I can't seem to be able to run \`tar' with the given arguments.
-         You may want to install GNU tar or Free paxutils, or check the
-         command line arguments."
-    exit 1
-    ;;
-
-  *)
-    echo 1>&2 "\
-WARNING: \`$1' is needed, and is $msg.
-         You might have modified some files without having the
-         proper tools for further handling them.  Check the \`README' file,
-         it often tells you about the needed prerequisites for installing
-         this package.  You may also peek at any GNU archive site, in case
-         some other package would contain this missing \`$1' program."
-    exit 1
-    ;;
-esac
-
-exit 0
-
-# Local variables:
-# eval: (add-hook 'write-file-hooks 'time-stamp)
-# time-stamp-start: "scriptversion="
-# time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-end: "$"
-# End:
diff -Nru /tmp/bxdedfLB6u/uriparser-0.6.0/doc/preprocess.sh /tmp/fLjZ2dz9P3/uriparser-0.7.4/doc/preprocess.sh
--- uriparser-0.6.0/doc/preprocess.sh	1970-01-01 01:00:00.000000000 +0100
+++ uriparser-0.7.4/doc/preprocess.sh	2008-12-20 18:52:47.000000000 +0000
@@ -0,0 +1,3 @@
+#! /bin/sh
+# Run GCC preprocessor and delete empty lines
+cpp -DURI_DOXYGEN -DURI_NO_UNICODE -C -I ../include $1 | sed '/^$/d' | sed -r 's/COMMENT_HACK//g'
diff -Nru /tmp/bxdedfLB6u/uriparser-0.6.0/doc/release.sh.in /tmp/fLjZ2dz9P3/uriparser-0.7.4/doc/release.sh.in
--- uriparser-0.6.0/doc/release.sh.in	1970-01-01 01:00:00.000000000 +0100
+++ uriparser-0.7.4/doc/release.sh.in	2008-12-23 02:19:39.000000000 +0000
@@ -0,0 +1,39 @@
+#! /usr/bin/env bash
+(
+cd $(dirname $(which "$0")) || exit 1
+
+distdir="@PACKAGE@-@VERSION@"
+[ -z $MAKE ] && MAKE=make
+
+# Clean up
+rm -Rf "${distdir}" "${distdir}.zip"
+
+# Generate
+"${MAKE}" || exit 1
+
+# Copy
+mkdir -p "${distdir}/html"
+cp \
+	html/*.css \
+	html/*.gif \
+	html/*.html \
+	html/*.png \
+	\
+	"${distdir}/html/" || exit 1
+
+# Package
+zip -r "${distdir}.zip" "${distdir}" || exit 1
+
+cat <<INFO
+=================================================
+${distdir} archives ready for distribution:
+${distdir}.zip
+=================================================
+
+INFO
+
+# Clean up
+rm -Rf "${distdir}"
+
+)
+exit $?
diff -Nru /tmp/bxdedfLB6u/uriparser-0.6.0/doc/rfc3513.htm /tmp/fLjZ2dz9P3/uriparser-0.7.4/doc/rfc3513.htm
--- uriparser-0.6.0/doc/rfc3513.htm	1970-01-01 01:00:00.000000000 +0100
+++ uriparser-0.7.4/doc/rfc3513.htm	2009-05-19 07:12:08.000000000 +0100
@@ -0,0 +1,1579 @@
+<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
+<html xml:lang="en" lang="en"><head>
+
+
+    <meta http-equiv="Content-Type" content="text/html; charset=us-ascii">
+    <meta name="robots" content="index,follow">
+    <meta name="creator" content="rfcmarkup version 1.46">
+    <link rel="icon" href="http://tools.ietf.org/images/rfc.png" type="image/png">
+    <link rel="shortcut icon" href="http://tools.ietf.org/images/rfc.png" type="image/png"><title>RFC 3513 Internet Protocol Version 6 (IPv6) Addressing Architecture</title>
+    
+    
+    <style type="text/css">
+	body {
+	    margin: 0px 8px;
+            font-size: 1em;
+	}
+        h1, h2, h3, h4, h5, h6, .h1, .h2, .h3, .h4, .h5, .h6 {
+	    font-weight: bold;
+            line-height: 0pt;
+            display: inline;
+            white-space: pre;
+            font-family: monospace;
+            font-size: 1em;
+	    font-weight: bold;
+        }
+        pre {
+            font-size: 1em;
+        }
+	.pre {
+	    white-space: pre;
+	    font-family: monospace;
+	}
+	.header{
+	    font-weight: bold;
+	}
+        @media print {
+            body {
+                font-size: 10.5pt;
+            }
+            h1, h2, h3, h4, h5, h6 {
+                font-size: 10.5pt;
+            }
+        
+            a:link, a:visited {
+                color: inherit;
+                text-decoration: none;
+            }
+	    .break {
+		page-break-before: always;
+                text-decoration: none;
+	    }
+            .noprint {
+                display: none;
+            }
+        }
+	@media screen {
+	    .grey, .grey a:link, .grey a:visited {
+		color: #777;
+	    }
+	    .break {
+                text-decoration: none;
+                display: none;
+	    }            
+            .docinfo {
+                background-color: #EEE;
+            }
+            .top {
+                border-top: 2px solid #EEE;
+            }
+            .bgwhite  { background-color: white; }
+            .bgred    { background-color: #F44; }
+            .bggrey   { background-color: #666; }
+            .bgbrown  { background-color: #840; }            
+            .bgorange { background-color: #FA0; }
+            .bgyellow { background-color: #EE0; }
+            .bgmagenta{ background-color: #F4F; }
+            .bgblue   { background-color: #66F; }
+            .bgcyan   { background-color: #4DD; }
+            .bggreen  { background-color: #4F4; }
+
+            .legend   { font-size: 90%; }
+            .cplate   { font-size: 70%; border: solid grey 1px; }
+	}
+    </style>
+
+    <script type="text/javascript"><!--
+    function addHeaderTags() {
+	var spans = document.getElementsByTagName("span");
+	for (var i=0; i < spans.length; i++) {
+	    var elem = spans[i];
+	    if (elem) {
+		var level = elem.getAttribute("class");
+                if (level == "h1" || level == "h2" || level == "h3" || level == "h4" || level == "h5" || level == "h6") {
+                    elem.innerHTML = "<"+level+">"+elem.innerHTML+"</"+level+">";		
+                }
+	    }
+	}
+    }
+    var legend_html = "Colour legend:<br />      <table>         <tr><td>Unknown:</td>          <td><span class='cplate bgwhite'>&nbsp;&nbsp;&nbsp;&nbsp;</span></td></tr>         <tr><td>Draft:</td>            <td><span class='cplate bgred'>&nbsp;&nbsp;&nbsp;&nbsp;</span></td></tr>         <tr><td>Informational:</td>    <td><span class='cplate bgorange'>&nbsp;&nbsp;&nbsp;&nbsp;</span></td></tr>         <tr><td>Experimental:</td>     <td><span class='cplate bgyellow'>&nbsp;&nbsp;&nbsp;&nbsp;</span></td></tr>         <tr><td>Best Common Practice:</td><td><span class='cplate bgmagenta'>&nbsp;&nbsp;&nbsp;&nbsp;</span></td></tr>         <tr><td>Proposed Standard:</td><td><span class='cplate bgblue'>&nbsp;&nbsp;&nbsp;&nbsp;</span></td></tr>         <tr><td>Draft Standard:</td>   <td><span class='cplate bgcyan'>&nbsp;&nbsp;&nbsp;&nbsp;</span></td></tr>         <tr><td>Standard:</td>         <td><span class='cplate bggreen'>&nbsp;&nbsp;&nbsp;&nbsp;</span></td></tr>         <tr><td>Historic:</td>         <td><span class='cplate bggrey'>&nbsp;&nbsp;&nbsp;&nbsp;</span></td></tr>         <tr><td>Obsolete:</td>         <td><span class='cplate bgbrown'>&nbsp;&nbsp;&nbsp;&nbsp;</span></td></tr>     </table>";
+    function showElem(id) {
+        var elem = document.getElementById(id);
+        elem.innerHTML = eval(id+"_html");
+        elem.style.visibility='visible';
+    }
+    function hideElem(id) {
+        var elem = document.getElementById(id);
+        elem.style.visibility='hidden';        
+        elem.innerHTML = "";
+    }
+    // -->
+    </script></head><body onload="addHeaderTags()">
+   <div style="height: 8px;">
+      <span style="cursor: pointer;" onmouseover="this.style.cursor='pointer';" onclick="showElem('legend');" onmouseout="hideElem('legend')" class="pre noprint docinfo bgbrown" title="Click for colour legend.">                                                                        </span>
+      <div id="legend" class="docinfo noprint pre legend" style="border: 1px solid rgb(51, 68, 85); padding: 4px 9px 5px 7px; position: absolute; top: 4px; left: 4ex; visibility: hidden; background-color: white;" onmouseover="showElem('legend');" onmouseout="hideElem('legend');"></div>
+   </div>
+<span class="pre noprint docinfo top">[<a href="http://tools.ietf.org/html/">RFCs/IDs</a>] [<a href="http://tools.ietf.org/rfc/rfc3513.txt">Plain Text</a>] [From <a href="http://tools.ietf.org/html/draft-ietf-ipngwg-addr-arch-v3">draft-ietf-ipngwg-addr-arch-v3</a>]           </span><br>
+<span class="pre noprint docinfo">                                                                        </span><br>
+<span class="pre noprint docinfo">Obsoleted by: <a href="http://tools.ietf.org/html/rfc4291">4291</a>                                     PROPOSED STANDARD</span><br>
+<span class="pre noprint docinfo">                                                                        </span><br>
+<pre>Network Working Group                                          R. Hinden
+Request for Comments: 3513                                         Nokia
+Obsoletes: <a href="http://tools.ietf.org/html/rfc2373">2373</a>                                               S. Deering
+Category: Standards Track                                  Cisco Systems
+                                                              April 2003
+
+
+       <span class="h1"><h1>Internet Protocol Version 6 (IPv6) Addressing Architecture</h1></span>
+
+Status of this Memo
+
+   This document specifies an Internet standards track protocol for the
+   Internet community, and requests discussion and suggestions for
+   improvements.  Please refer to the current edition of the "Internet
+   Official Protocol Standards" (STD 1) for the standardization state
+   and status of this protocol.  Distribution of this memo is unlimited.
+
+Copyright Notice
+
+   Copyright (C) The Internet Society (2003).  All Rights Reserved.
+
+Abstract
+
+   This specification defines the addressing architecture of the IP
+   Version 6 (IPv6) protocol.  The document includes the IPv6 addressing
+   model, text representations of IPv6 addresses, definition of IPv6
+   unicast addresses, anycast addresses, and multicast addresses, and an
+   IPv6 node's required addresses.
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+<span class="grey">Hinden &amp; Deering            Standards Track                     [Page 1]</span>
+<a name="page-2" id="page-2" href="#page-2"><span class="break"> </span></a>
+<span class="grey"><a href="http://tools.ietf.org/html/rfc3513">RFC 3513</a>              IPv6 Addressing Architecture            April 2003</span>
+
+
+Table of Contents
+
+   <a href="#section-1">1</a>. Introduction.................................................<a href="#page-3">3</a>
+   <a href="#section-2">2</a>. IPv6 Addressing..............................................<a href="#page-3">3</a>
+      <a href="#section-2.1">2.1</a> Addressing Model.........................................<a href="#page-4">4</a>
+      <a href="#section-2.2">2.2</a> Text Representation of Addresses.........................<a href="#page-4">4</a>
+      <a href="#section-2.3">2.3</a> Text Representation of Address Prefixes..................<a href="#page-5">5</a>
+      <a href="#section-2.4">2.4</a> Address Type Identification..............................<a href="#page-6">6</a>
+      <a href="#section-2.5">2.5</a> Unicast Addresses........................................<a href="#page-7">7</a>
+          <a href="#section-2.5.1">2.5.1</a> Interface Identifiers..............................<a href="#page-8">8</a>
+          <a href="#section-2.5.2">2.5.2</a> The Unspecified Address............................<a href="#page-9">9</a>
+          <a href="#section-2.5.3">2.5.3</a> The Loopback Address...............................<a href="#page-9">9</a>
+          <a href="#section-2.5.4">2.5.4</a> Global Unicast Addresses..........................<a href="#page-10">10</a>
+          <a href="#section-2.5.5">2.5.5</a> IPv6 Addresses with Embedded IPv4 Addresses.......<a href="#page-10">10</a>
+          <a href="#section-2.5.6">2.5.6</a> Local-use IPv6 Unicast Addresses..................<a href="#page-11">11</a>
+      <a href="#section-2.6">2.6</a> Anycast Addresses.......................................<a href="#page-12">12</a>
+          <a href="#section-2.6.1">2.6.1</a> Required Anycast Address..........................<a href="#page-13">13</a>
+      <a href="#section-2.7">2.7</a> Multicast Addresses.....................................<a href="#page-13">13</a>
+          <a href="#section-2.7.1">2.7.1</a> Pre-Defined Multicast Addresses...................<a href="#page-15">15</a>
+      <a href="#section-2.8">2.8</a> A Node's Required Addresses.............................<a href="#page-17">17</a>
+   <a href="#section-3">3</a>. Security Considerations.....................................<a href="#page-17">17</a>
+   <a href="#section-4">4</a>. IANA Considerations.........................................<a href="#page-18">18</a>
+   <a href="#section-5">5</a>. References..................................................<a href="#page-19">19</a>
+      <a href="#section-5.1">5.1</a> Normative References....................................<a href="#page-19">19</a>
+      <a href="#section-5.2">5.2</a> Informative References..................................<a href="#page-19">19</a>
+   APPENDIX A: Creating Modified EUI-64 format Interface IDs......<a href="#page-21">21</a>
+   APPENDIX B: Changes from <a href="http://tools.ietf.org/html/rfc2373">RFC-2373</a>..............................<a href="#page-24">24</a>
+   Authors' Addresses.............................................<a href="#page-25">25</a>
+   Full Copyright Statement.......................................<a href="#page-26">26</a>
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+<span class="grey">Hinden &amp; Deering            Standards Track                     [Page 2]</span>
+<a name="page-3" id="page-3" href="#page-3"><span class="break"> </span></a>
+<span class="grey"><a href="http://tools.ietf.org/html/rfc3513">RFC 3513</a>              IPv6 Addressing Architecture            April 2003</span>
+
+
+<span class="h2"><h2><a name="section-1">1</a>.  Introduction</h2></span>
+
+   This specification defines the addressing architecture of the IP
+   Version 6 (IPv6) protocol.  It includes the basic formats for the
+   various types of IPv6 addresses (unicast, anycast, and multicast).
+
+   The authors would like to acknowledge the contributions of Paul
+   Francis, Scott Bradner, Jim Bound, Brian Carpenter, Matt Crawford,
+   Deborah Estrin, Roger Fajman, Bob Fink, Peter Ford, Bob Gilligan,
+   Dimitry Haskin, Tom Harsch, Christian Huitema, Tony Li, Greg
+   Minshall, Thomas Narten, Erik Nordmark, Yakov Rekhter, Bill Simpson,
+   Sue Thomson, Markku Savela, and Larry Masinter.
+
+<span class="h2"><h2><a name="section-2">2</a>. IPv6 Addressing</h2></span>
+
+   IPv6 addresses are 128-bit identifiers for interfaces and sets of
+   interfaces (where "interface" is as defined in <a href="#section-2">section 2</a> of [<a href="#ref-IPV6" title="&quot;Internet Protocol, Version 6 (IPv6) Specification&quot;">IPV6</a>]).
+   There are three types of addresses:
+
+   Unicast:   An identifier for a single interface.  A packet sent to a
+              unicast address is delivered to the interface identified
+              by that address.
+
+   Anycast:   An identifier for a set of interfaces (typically belonging
+              to different nodes).  A packet sent to an anycast address
+              is delivered to one of the interfaces identified by that
+              address (the "nearest" one, according to the routing
+              protocols' measure of distance).
+
+   Multicast: An identifier for a set of interfaces (typically belonging
+              to different nodes).  A packet sent to a multicast address
+              is delivered to all interfaces identified by that address.
+
+   There are no broadcast addresses in IPv6, their function being
+   superseded by multicast addresses.
+
+   In this document, fields in addresses are given a specific name, for
+   example "subnet".  When this name is used with the term "ID" for
+   identifier after the name (e.g., "subnet ID"), it refers to the
+   contents of the named field.  When it is used with the term "prefix"
+   (e.g., "subnet prefix") it refers to all of the address from the left
+   up to and including this field.
+
+   In IPv6, all zeros and all ones are legal values for any field,
+   unless specifically excluded.  Specifically, prefixes may contain, or
+   end with, zero-valued fields.
+
+
+
+
+
+<span class="grey">Hinden &amp; Deering            Standards Track                     [Page 3]</span>
+<a name="page-4" id="page-4" href="#page-4"><span class="break"> </span></a>
+<span class="grey"><a href="http://tools.ietf.org/html/rfc3513">RFC 3513</a>              IPv6 Addressing Architecture            April 2003</span>
+
+
+<span class="h3"><h3><a name="section-2.1">2.1</a> Addressing Model</h3></span>
+
+   IPv6 addresses of all types are assigned to interfaces, not nodes.
+   An IPv6 unicast address refers to a single interface.  Since each
+   interface belongs to a single node, any of that node's interfaces'
+   unicast addresses may be used as an identifier for the node.
+
+   All interfaces are required to have at least one link-local unicast
+   address (see <a href="#section-2.8">section 2.8</a> for additional required addresses).  A
+   single interface may also have multiple IPv6 addresses of any type
+   (unicast, anycast, and multicast) or scope.  Unicast addresses with
+   scope greater than link-scope are not needed for interfaces that are
+   not used as the origin or destination of any IPv6 packets to or from
+   non-neighbors.  This is sometimes convenient for point-to-point
+   interfaces.  There is one exception to this addressing model:
+
+      A unicast address or a set of unicast addresses may be assigned to
+      multiple physical interfaces if the implementation treats the
+      multiple physical interfaces as one interface when presenting it
+      to the internet layer.  This is useful for load-sharing over
+      multiple physical interfaces.
+
+   Currently IPv6 continues the IPv4 model that a subnet prefix is
+   associated with one link.  Multiple subnet prefixes may be assigned
+   to the same link.
+
+<span class="h3"><h3><a name="section-2.2">2.2</a> Text Representation of Addresses</h3></span>
+
+   There are three conventional forms for representing IPv6 addresses as
+   text strings:
+
+   1. The preferred form is x:x:x:x:x:x:x:x, where the 'x's are the
+      hexadecimal values of the eight 16-bit pieces of the address.
+
+      Examples:
+
+         FEDC:BA98:7654:3210:FEDC:BA98:7654:3210
+
+         1080:0:0:0:8:800:200C:417A
+
+      Note that it is not necessary to write the leading zeros in an
+      individual field, but there must be at least one numeral in every
+      field (except for the case described in 2.).
+
+   2. Due to some methods of allocating certain styles of IPv6
+      addresses, it will be common for addresses to contain long strings
+      of zero bits.  In order to make writing addresses containing zero
+      bits easier a special syntax is available to compress the zeros.
+
+
+
+<span class="grey">Hinden &amp; Deering            Standards Track                     [Page 4]</span>
+<a name="page-5" id="page-5" href="#page-5"><span class="break"> </span></a>
+<span class="grey"><a href="http://tools.ietf.org/html/rfc3513">RFC 3513</a>              IPv6 Addressing Architecture            April 2003</span>
+
+
+      The use of "::" indicates one or more groups of 16 bits of zeros.
+      The "::" can only appear once in an address.  The "::" can also be
+      used to compress leading or trailing zeros in an address.
+
+      For example, the following addresses:
+
+         1080:0:0:0:8:800:200C:417A  a unicast address
+         FF01:0:0:0:0:0:0:101        a multicast address
+         0:0:0:0:0:0:0:1             the loopback address
+         0:0:0:0:0:0:0:0             the unspecified addresses
+
+      may be represented as:
+
+         1080::8:800:200C:417A       a unicast address
+         FF01::101                   a multicast address
+         ::1                         the loopback address
+         ::                          the unspecified addresses
+
+   3. An alternative form that is sometimes more convenient when dealing
+      with a mixed environment of IPv4 and IPv6 nodes is
+      x:x:x:x:x:x:d.d.d.d, where the 'x's are the hexadecimal values of
+      the six high-order 16-bit pieces of the address, and the 'd's are
+      the decimal values of the four low-order 8-bit pieces of the
+      address (standard IPv4 representation).  Examples:
+
+         0:0:0:0:0:0:13.1.68.3
+
+         0:0:0:0:0:FFFF:129.144.52.38
+
+      or in compressed form:
+
+         ::13.1.68.3
+
+         ::FFFF:129.144.52.38
+
+<span class="h3"><h3><a name="section-2.3">2.3</a> Text Representation of Address Prefixes</h3></span>
+
+   The text representation of IPv6 address prefixes is similar to the
+   way IPv4 addresses prefixes are written in CIDR notation [<a href="#ref-CIDR" title="&quot;Classless Inter-Domain Routing (CIDR): An Address Assignment and Aggregation Strategy&quot;">CIDR</a>].  An
+   IPv6 address prefix is represented by the notation:
+
+      ipv6-address/prefix-length
+
+   where
+
+      ipv6-address    is an IPv6 address in any of the notations listed
+                      in <a href="#section-2.2">section 2.2</a>.
+
+
+
+
+<span class="grey">Hinden &amp; Deering            Standards Track                     [Page 5]</span>
+<a name="page-6" id="page-6" href="#page-6"><span class="break"> </span></a>
+<span class="grey"><a href="http://tools.ietf.org/html/rfc3513">RFC 3513</a>              IPv6 Addressing Architecture            April 2003</span>
+
+
+      prefix-length   is a decimal value specifying how many of the
+                      leftmost contiguous bits of the address comprise
+                      the prefix.
+
+   For example, the following are legal representations of the 60-bit
+   prefix 12AB00000000CD3 (hexadecimal):
+
+      12AB:0000:0000:CD30:0000:0000:0000:0000/60
+      12AB::CD30:0:0:0:0/60
+      12AB:0:0:CD30::/60
+
+   The following are NOT legal representations of the above prefix:
+
+      12AB:0:0:CD3/60   may drop leading zeros, but not trailing zeros,
+                        within any 16-bit chunk of the address
+
+      12AB::CD30/60     address to left of "/" expands to
+                        12AB:0000:0000:0000:0000:000:0000:CD30
+
+      12AB::CD3/60      address to left of "/" expands to
+                        12AB:0000:0000:0000:0000:000:0000:0CD3
+
+   When writing both a node address and a prefix of that node address
+   (e.g., the node's subnet prefix), the two can combined as follows:
+
+      the node address      12AB:0:0:CD30:123:4567:89AB:CDEF
+      and its subnet number 12AB:0:0:CD30::/60
+
+      can be abbreviated as 12AB:0:0:CD30:123:4567:89AB:CDEF/60
+
+<a href="#section-2.4">2.4</a> Address Type Identification
+
+   The type of an IPv6 address is identified by the high-order bits of
+   the address, as follows:
+
+   Address type         Binary prefix        IPv6 notation   Section
+   ------------         -------------        -------------   -------
+   Unspecified          00...0  (128 bits)   ::/128          2.5.2
+   Loopback             00...1  (128 bits)   ::1/128         2.5.3
+   Multicast            11111111             FF00::/8        2.7
+   Link-local unicast   1111111010           FE80::/10       2.5.6
+   Site-local unicast   1111111011           FEC0::/10       2.5.6
+   Global unicast       (everything else)
+
+   Anycast addresses are taken from the unicast address spaces (of any
+   scope) and are not syntactically distinguishable from unicast
+   addresses.
+
+
+
+
+<span class="grey">Hinden &amp; Deering            Standards Track                     [Page 6]</span>
+<a name="page-7" id="page-7" href="#page-7"><span class="break"> </span></a>
+<span class="grey"><a href="http://tools.ietf.org/html/rfc3513">RFC 3513</a>              IPv6 Addressing Architecture            April 2003</span>
+
+
+   The general format of global unicast addresses is described in
+   <a href="#section-2.5.4">section 2.5.4</a>.  Some special-purpose subtypes of global unicast
+   addresses which contain embedded IPv4 addresses (for the purposes of
+   IPv4-IPv6 interoperation) are described in <a href="#section-2.5.5">section 2.5.5</a>.
+
+   Future specifications may redefine one or more sub-ranges of the
+   global unicast space for other purposes, but unless and until that
+   happens, implementations must treat all addresses that do not start
+   with any of the above-listed prefixes as global unicast addresses.
+
+<span class="h3"><h3><a name="section-2.5">2.5</a> Unicast Addresses</h3></span>
+
+   IPv6 unicast addresses are aggregable with prefixes of arbitrary
+   bit-length similar to IPv4 addresses under Classless Interdomain
+   Routing.
+
+   There are several types of unicast addresses in IPv6, in particular
+   global unicast, site-local unicast, and link-local unicast.  There
+   are also some special-purpose subtypes of global unicast, such as
+   IPv6 addresses with embedded IPv4 addresses or encoded NSAP
+   addresses.  Additional address types or subtypes can be defined in
+   the future.
+
+   IPv6 nodes may have considerable or little knowledge of the internal
+   structure of the IPv6 address, depending on the role the node plays
+   (for instance, host versus router).  At a minimum, a node may
+   consider that unicast addresses (including its own) have no internal
+   structure:
+
+   |                           128 bits                              |
+   +-----------------------------------------------------------------+
+   |                          node address                           |
+   +-----------------------------------------------------------------+
+
+   A slightly sophisticated host (but still rather simple) may
+   additionally be aware of subnet prefix(es) for the link(s) it is
+   attached to, where different addresses may have different values for
+   n:
+
+   |                         n bits                 |   128-n bits   |
+   +------------------------------------------------+----------------+
+   |                   subnet prefix                | interface ID   |
+   +------------------------------------------------+----------------+
+
+   Though a very simple router may have no knowledge of the internal
+   structure of IPv6 unicast addresses, routers will more generally have
+   knowledge of one or more of the hierarchical boundaries for the
+   operation of routing protocols.  The known boundaries will differ
+
+
+
+<span class="grey">Hinden &amp; Deering            Standards Track                     [Page 7]</span>
+<a name="page-8" id="page-8" href="#page-8"><span class="break"> </span></a>
+<span class="grey"><a href="http://tools.ietf.org/html/rfc3513">RFC 3513</a>              IPv6 Addressing Architecture            April 2003</span>
+
+
+   from router to router, depending on what positions the router holds
+   in the routing hierarchy.
+
+<span class="h4"><h4><a name="section-2.5.1">2.5.1</a> Interface Identifiers</h4></span>
+
+   Interface identifiers in IPv6 unicast addresses are used to identify
+   interfaces on a link.  They are required to be unique within a subnet
+   prefix.  It is recommended that the same interface identifier not be
+   assigned to different nodes on a link.  They may also be unique over
+   a broader scope.  In some cases an interface's identifier will be
+   derived directly from that interface's link-layer address.  The same
+   interface identifier may be used on multiple interfaces on a single
+   node, as long as they are attached to different subnets.
+
+   Note that the uniqueness of interface identifiers is independent of
+   the uniqueness of IPv6 addresses.  For example, a global unicast
+   address may be created with a non-global scope interface identifier
+   and a site-local address may be created with a global scope interface
+   identifier.
+
+   For all unicast addresses, except those that start with binary value
+   000, Interface IDs are required to be 64 bits long and to be
+   constructed in Modified EUI-64 format.
+
+   Modified EUI-64 format based Interface identifiers may have global
+   scope when derived from a global token (e.g., IEEE 802 48-bit MAC or
+   IEEE EUI-64 identifiers [<a href="#ref-EUI64" title="&quot;./rfc3513&quot;">EUI64</a>]) or may have local scope where a
+   global token is not available (e.g., serial links, tunnel end-points,
+   etc.) or where global tokens are undesirable (e.g., temporary tokens
+   for privacy [<a href="#ref-PRIV" title="&quot;Privacy Extensions for Stateless Address Autoconfiguration in IPv6&quot;">PRIV</a>]).
+
+   Modified EUI-64 format interface identifiers are formed by inverting
+   the "u" bit (universal/local bit in IEEE EUI-64 terminology) when
+   forming the interface identifier from IEEE EUI-64 identifiers.  In
+   the resulting Modified EUI-64 format the "u" bit is set to one (1) to
+   indicate global scope, and it is set to zero (0) to indicate local
+   scope.  The first three octets in binary of an IEEE EUI-64 identifier
+   are as follows:
+
+       0       0 0       1 1       2
+      |0       7 8       5 6       3|
+      +----+----+----+----+----+----+
+      |cccc|ccug|cccc|cccc|cccc|cccc|
+      +----+----+----+----+----+----+
+
+   written in Internet standard bit-order , where "u" is the
+   universal/local bit, "g" is the individual/group bit, and "c" are the
+   bits of the company_id.  Appendix A: "Creating Modified EUI-64 format
+
+
+
+<span class="grey">Hinden &amp; Deering            Standards Track                     [Page 8]</span>
+<a name="page-9" id="page-9" href="#page-9"><span class="break"> </span></a>
+<span class="grey"><a href="http://tools.ietf.org/html/rfc3513">RFC 3513</a>              IPv6 Addressing Architecture            April 2003</span>
+
+
+   Interface Identifiers" provides examples on the creation of Modified
+   EUI-64 format based interface identifiers.
+
+   The motivation for inverting the "u" bit when forming an interface
+   identifier is to make it easy for system administrators to hand
+   configure non-global identifiers when hardware tokens are not
+   available.  This is expected to be case for serial links, tunnel end-
+   points, etc.  The alternative would have been for these to be of the
+   form 0200:0:0:1, 0200:0:0:2, etc., instead of the much simpler 1, 2,
+   etc.
+
+   The use of the universal/local bit in the Modified EUI-64 format
+   identifier is to allow development of future technology that can take
+   advantage of interface identifiers with global scope.
+
+   The details of forming interface identifiers are defined in the
+   appropriate "IPv6 over &lt;link&gt;" specification such as "IPv6 over
+   Ethernet" [<a href="#ref-ETHER" title="&quot;Transmission of IPv6 Packets over Ethernet Networks&quot;">ETHER</a>], "IPv6 over FDDI" [<a href="#ref-FDDI" title="&quot;Transmission of IPv6 Packets over FDDI Networks&quot;">FDDI</a>], etc.
+
+<span class="h4"><h4><a name="section-2.5.2">2.5.2</a> The Unspecified Address</h4></span>
+
+   The address 0:0:0:0:0:0:0:0 is called the unspecified address.  It
+   must never be assigned to any node.  It indicates the absence of an
+   address.  One example of its use is in the Source Address field of
+   any IPv6 packets sent by an initializing host before it has learned
+   its own address.
+
+   The unspecified address must not be used as the destination address
+   of IPv6 packets or in IPv6 Routing Headers.  An IPv6 packet with a
+   source address of unspecified must never be forwarded by an IPv6
+   router.
+
+<span class="h4"><h4><a name="section-2.5.3">2.5.3</a> The Loopback Address</h4></span>
+
+   The unicast address 0:0:0:0:0:0:0:1 is called the loopback address.
+   It may be used by a node to send an IPv6 packet to itself.  It may
+   never be assigned to any physical interface.   It is treated as
+   having link-local scope, and may be thought of as the link-local
+   unicast address of a virtual interface (typically called "the
+   loopback interface") to an imaginary link that goes nowhere.
+
+   The loopback address must not be used as the source address in IPv6
+   packets that are sent outside of a single node.  An IPv6 packet with
+   a destination address of loopback must never be sent outside of a
+   single node and must never be forwarded by an IPv6 router.  A packet
+   received on an interface with destination address of loopback must be
+   dropped.
+
+
+
+
+<span class="grey">Hinden &amp; Deering            Standards Track                     [Page 9]</span>
+<a name="page-10" id="page-10" href="#page-10"><span class="break"> </span></a>
+<span class="grey"><a href="http://tools.ietf.org/html/rfc3513">RFC 3513</a>              IPv6 Addressing Architecture            April 2003</span>
+
+
+<span class="h4"><h4><a name="section-2.5.4">2.5.4</a> Global Unicast Addresses</h4></span>
+
+   The general format for IPv6 global unicast addresses is as follows:
+
+   |         n bits         |   m bits  |       128-n-m bits         |
+   +------------------------+-----------+----------------------------+
+   | global routing prefix  | subnet ID |       interface ID         |
+   +------------------------+-----------+----------------------------+
+
+   where the global routing prefix is a (typically hierarchically-
+   structured) value assigned to a site (a cluster of subnets/links),
+   the subnet ID is an identifier of a link within the site, and the
+   interface ID is as defined in <a href="#section-2.5.1">section 2.5.1</a>.
+
+   All global unicast addresses other than those that start with binary
+   000 have a 64-bit interface ID field (i.e., n + m = 64), formatted as
+   described in <a href="#section-2.5.1">section 2.5.1</a>.  Global unicast addresses that start with
+   binary 000 have no such constraint on the size or structure of the
+   interface ID field.
+
+   Examples of global unicast addresses that start with binary 000 are
+   the IPv6 address with embedded IPv4 addresses described in section
+   2.5.5 and the IPv6 address containing encoded NSAP addresses
+   specified in [<a href="#ref-NSAP" title="&quot;OSI NSAPs and IPv6&quot;">NSAP</a>].  An example of global addresses starting with a
+   binary value other than 000 (and therefore having a 64-bit interface
+   ID field) can be found in [<a href="#ref-AGGR" title="&quot;An Aggregatable Global Unicast Address Format&quot;">AGGR</a>].
+
+<span class="h4"><h4><a name="section-2.5.5">2.5.5</a> IPv6 Addresses with Embedded IPv4 Addresses</h4></span>
+
+   The IPv6 transition mechanisms [<a href="#ref-TRAN" title="&quot;Transition Mechanisms for IPv6 Hosts and Routers&quot;">TRAN</a>] include a technique for hosts
+   and routers to dynamically tunnel IPv6 packets over IPv4 routing
+   infrastructure.  IPv6 nodes that use this technique are assigned
+   special IPv6 unicast addresses that carry a global IPv4 address in
+   the low-order 32 bits.  This type of address is termed an "IPv4-
+   compatible IPv6 address" and has the format:
+
+   |                80 bits               | 16 |      32 bits        |
+   +--------------------------------------+--------------------------+
+   |0000..............................0000|0000|    IPv4 address     |
+   +--------------------------------------+----+---------------------+
+
+   Note: The IPv4 address used in the "IPv4-compatible IPv6 address"
+   must be a globally-unique IPv4 unicast address.
+
+   A second type of IPv6 address which holds an embedded IPv4 address is
+   also defined.  This address type is used to represent the addresses
+   of IPv4 nodes as IPv6 addresses.  This type of address is termed an
+   "IPv4-mapped IPv6 address" and has the format:
+
+
+
+<span class="grey">Hinden &amp; Deering            Standards Track                    [Page 10]</span>
+<a name="page-11" id="page-11" href="#page-11"><span class="break"> </span></a>
+<span class="grey"><a href="http://tools.ietf.org/html/rfc3513">RFC 3513</a>              IPv6 Addressing Architecture            April 2003</span>
+
+
+   |                80 bits               | 16 |      32 bits        |
+   +--------------------------------------+--------------------------+
+   |0000..............................0000|FFFF|    IPv4 address     |
+   +--------------------------------------+----+---------------------+
+
+<span class="h4"><h4><a name="section-2.5.6">2.5.6</a> Local-Use IPv6 Unicast Addresses</h4></span>
+
+   There are two types of local-use unicast addresses defined.  These
+   are Link-Local and Site-Local.  The Link-Local is for use on a single
+   link and the Site-Local is for use in a single site.  Link-Local
+   addresses have the following format:
+
+   |   10     |
+   |  bits    |         54 bits         |          64 bits           |
+   +----------+-------------------------+----------------------------+
+   |1111111010|           0             |       interface ID         |
+   +----------+-------------------------+----------------------------+
+
+   Link-Local addresses are designed to be used for addressing on a
+   single link for purposes such as automatic address configuration,
+   neighbor discovery, or when no routers are present.
+
+   Routers must not forward any packets with link-local source or
+   destination addresses to other links.
+
+   Site-Local addresses have the following format:
+
+   |   10     |
+   |  bits    |         54 bits         |         64 bits            |
+   +----------+-------------------------+----------------------------+
+   |1111111011|        subnet ID        |       interface ID         |
+   +----------+-------------------------+----------------------------+
+
+   Site-local addresses are designed to be used for addressing inside of
+   a site without the need for a global prefix.  Although a subnet ID
+   may be up to 54-bits long, it is expected that globally-connected
+   sites will use the same subnet IDs for site-local and global
+   prefixes.
+
+   Routers must not forward any packets with site-local source or
+   destination addresses outside of the site.
+
+
+
+
+
+
+
+
+
+
+<span class="grey">Hinden &amp; Deering            Standards Track                    [Page 11]</span>
+<a name="page-12" id="page-12" href="#page-12"><span class="break"> </span></a>
+<span class="grey"><a href="http://tools.ietf.org/html/rfc3513">RFC 3513</a>              IPv6 Addressing Architecture            April 2003</span>
+
+
+<span class="h3"><h3><a name="section-2.6">2.6</a> Anycast Addresses</h3></span>
+
+   An IPv6 anycast address is an address that is assigned to more than
+   one interface (typically belonging to different nodes), with the
+   property that a packet sent to an anycast address is routed to the
+   "nearest" interface having that address, according to the routing
+   protocols' measure of distance.
+
+   Anycast addresses are allocated from the unicast address space, using
+   any of the defined unicast address formats.  Thus, anycast addresses
+   are syntactically indistinguishable from unicast addresses.  When a
+   unicast address is assigned to more than one interface, thus turning
+   it into an anycast address, the nodes to which the address is
+   assigned must be explicitly configured to know that it is an anycast
+   address.
+
+   For any assigned anycast address, there is a longest prefix P of that
+   address that identifies the topological region in which all
+   interfaces belonging to that anycast address reside.  Within the
+   region identified by P, the anycast address must be maintained as a
+   separate entry in the routing system (commonly referred to as a "host
+   route"); outside the region identified by P, the anycast address may
+   be aggregated into the routing entry for prefix P.
+
+   Note that in the worst case, the prefix P of an anycast set may be
+   the null prefix, i.e., the members of the set may have no topological
+   locality.  In that case, the anycast address must be maintained as a
+   separate routing entry throughout the entire internet, which presents
+   a severe scaling limit on how many such "global" anycast sets may be
+   supported.  Therefore, it is expected that support for global anycast
+   sets may be unavailable or very restricted.
+
+   One expected use of anycast addresses is to identify the set of
+   routers belonging to an organization providing internet service.
+   Such addresses could be used as intermediate addresses in an IPv6
+   Routing header, to cause a packet to be delivered via a particular
+   service provider or sequence of service providers.
+
+   Some other possible uses are to identify the set of routers attached
+   to a particular subnet, or the set of routers providing entry into a
+   particular routing domain.
+
+   There is little experience with widespread, arbitrary use of internet
+   anycast addresses, and some known complications and hazards when
+   using them in their full generality [<a href="#ref-ANYCST" title="&quot;Host Anycasting Service&quot;">ANYCST</a>].  Until more experience
+   has been gained and solutions are specified, the following
+   restrictions are imposed on IPv6 anycast addresses:
+
+
+
+
+<span class="grey">Hinden &amp; Deering            Standards Track                    [Page 12]</span>
+<a name="page-13" id="page-13" href="#page-13"><span class="break"> </span></a>
+<span class="grey"><a href="http://tools.ietf.org/html/rfc3513">RFC 3513</a>              IPv6 Addressing Architecture            April 2003</span>
+
+
+   o  An anycast address must not be used as the source address of an
+      IPv6 packet.
+
+   o  An anycast address must not be assigned to an IPv6 host, that is,
+      it may be assigned to an IPv6 router only.
+
+<span class="h4"><h4><a name="section-2.6.1">2.6.1</a> Required Anycast Address</h4></span>
+
+   The Subnet-Router anycast address is predefined.  Its format is as
+   follows:
+
+   |                         n bits                 |   128-n bits   |
+   +------------------------------------------------+----------------+
+   |                   subnet prefix                | 00000000000000 |
+   +------------------------------------------------+----------------+
+
+   The "subnet prefix" in an anycast address is the prefix which
+   identifies a specific link.  This anycast address is syntactically
+   the same as a unicast address for an interface on the link with the
+   interface identifier set to zero.
+
+   Packets sent to the Subnet-Router anycast address will be delivered
+   to one router on the subnet.  All routers are required to support the
+   Subnet-Router anycast addresses for the subnets to which they have
+   interfaces.
+
+   The subnet-router anycast address is intended to be used for
+   applications where a node needs to communicate with any one of the
+   set of routers.
+
+<span class="h3"><h3><a name="section-2.7">2.7</a> Multicast Addresses</h3></span>
+
+   An IPv6 multicast address is an identifier for a group of interfaces
+   (typically on different nodes).  An interface may belong to any
+   number of multicast groups.  Multicast addresses have the following
+   format:
+
+   |   8    |  4 |  4 |                  112 bits                   |
+   +------ -+----+----+---------------------------------------------+
+   |11111111|flgs|scop|                  group ID                   |
+   +--------+----+----+---------------------------------------------+
+
+         binary 11111111 at the start of the address identifies the
+         address as being a multicast address.
+
+                                       +-+-+-+-+
+         flgs is a set of 4 flags:     |0|0|0|T|
+                                       +-+-+-+-+
+
+
+
+<span class="grey">Hinden &amp; Deering            Standards Track                    [Page 13]</span>
+<a name="page-14" id="page-14" href="#page-14"><span class="break"> </span></a>
+<span class="grey"><a href="http://tools.ietf.org/html/rfc3513">RFC 3513</a>              IPv6 Addressing Architecture            April 2003</span>
+
+
+            The high-order 3 flags are reserved, and must be initialized
+            to 0.
+
+            T = 0 indicates a permanently-assigned ("well-known")
+            multicast address, assigned by the Internet Assigned Number
+            Authority (IANA).
+
+            T = 1 indicates a non-permanently-assigned ("transient")
+            multicast address.
+
+         scop is a 4-bit multicast scope value used to limit the scope
+         of the multicast group.  The values are:
+
+            0  reserved
+            1  interface-local scope
+            2  link-local scope
+            3  reserved
+            4  admin-local scope
+            5  site-local scope
+            6  (unassigned)
+            7  (unassigned)
+            8  organization-local scope
+            9  (unassigned)
+            A  (unassigned)
+            B  (unassigned)
+            C  (unassigned)
+            D  (unassigned)
+            E  global scope
+            F  reserved
+
+            interface-local scope spans only a single interface on a
+            node, and is useful only for loopback transmission of
+            multicast.
+
+            link-local and site-local multicast scopes span the same
+            topological regions as the corresponding unicast scopes.
+
+            admin-local scope is the smallest scope that must be
+            administratively configured, i.e., not automatically derived
+            from physical connectivity or other, non- multicast-related
+            configuration.
+
+            organization-local scope is intended to span multiple sites
+            belonging to a single organization.
+
+            scopes labeled "(unassigned)" are available for
+            administrators to define additional multicast regions.
+
+
+
+
+<span class="grey">Hinden &amp; Deering            Standards Track                    [Page 14]</span>
+<a name="page-15" id="page-15" href="#page-15"><span class="break"> </span></a>
+<span class="grey"><a href="http://tools.ietf.org/html/rfc3513">RFC 3513</a>              IPv6 Addressing Architecture            April 2003</span>
+
+
+         group ID identifies the multicast group, either permanent or
+         transient, within the given scope.
+
+   The "meaning" of a permanently-assigned multicast address is
+   independent of the scope value.  For example, if the "NTP servers
+   group" is assigned a permanent multicast address with a group ID of
+   101 (hex), then:
+
+      FF01:0:0:0:0:0:0:101 means all NTP servers on the same interface
+      (i.e., the same node) as the sender.
+
+      FF02:0:0:0:0:0:0:101 means all NTP servers on the same link as the
+      sender.
+
+      FF05:0:0:0:0:0:0:101 means all NTP servers in the same site as the
+      sender.
+
+      FF0E:0:0:0:0:0:0:101 means all NTP servers in the internet.
+
+   Non-permanently-assigned multicast addresses are meaningful only
+   within a given scope.  For example, a group identified by the non-
+   permanent, site-local multicast address FF15:0:0:0:0:0:0:101 at one
+   site bears no relationship to a group using the same address at a
+   different site, nor to a non-permanent group using the same group ID
+   with different scope, nor to a permanent group with the same group
+   ID.
+
+   Multicast addresses must not be used as source addresses in IPv6
+   packets or appear in any Routing header.
+
+   Routers must not forward any multicast packets beyond of the scope
+   indicated by the scop field in the destination multicast address.
+
+   Nodes must not originate a packet to a multicast address whose scop
+   field contains the reserved value 0; if such a packet is received, it
+   must be silently dropped.  Nodes should not originate a packet to a
+   multicast address whose scop field contains the reserved value F; if
+   such a packet is sent or received, it must be treated the same as
+   packets destined to a global (scop E) multicast address.
+
+<span class="h4"><h4><a name="section-2.7.1">2.7.1</a> Pre-Defined Multicast Addresses</h4></span>
+
+   The following well-known multicast addresses are pre-defined.  The
+   group ID's defined in this section are defined for explicit scope
+   values.
+
+   Use of these group IDs for any other scope values, with the T flag
+   equal to 0, is not allowed.
+
+
+
+<span class="grey">Hinden &amp; Deering            Standards Track                    [Page 15]</span>
+<a name="page-16" id="page-16" href="#page-16"><span class="break"> </span></a>
+<span class="grey"><a href="http://tools.ietf.org/html/rfc3513">RFC 3513</a>              IPv6 Addressing Architecture            April 2003</span>
+
+
+      Reserved Multicast Addresses:   FF00:0:0:0:0:0:0:0
+                                      FF01:0:0:0:0:0:0:0
+                                      FF02:0:0:0:0:0:0:0
+                                      FF03:0:0:0:0:0:0:0
+                                      FF04:0:0:0:0:0:0:0
+                                      FF05:0:0:0:0:0:0:0
+                                      FF06:0:0:0:0:0:0:0
+                                      FF07:0:0:0:0:0:0:0
+                                      FF08:0:0:0:0:0:0:0
+                                      FF09:0:0:0:0:0:0:0
+                                      FF0A:0:0:0:0:0:0:0
+                                      FF0B:0:0:0:0:0:0:0
+                                      FF0C:0:0:0:0:0:0:0
+                                      FF0D:0:0:0:0:0:0:0
+                                      FF0E:0:0:0:0:0:0:0
+                                      FF0F:0:0:0:0:0:0:0
+
+   The above multicast addresses are reserved and shall never be
+   assigned to any multicast group.
+
+      All Nodes Addresses:    FF01:0:0:0:0:0:0:1
+                              FF02:0:0:0:0:0:0:1
+
+   The above multicast addresses identify the group of all IPv6 nodes,
+   within scope 1 (interface-local) or 2 (link-local).
+
+      All Routers Addresses:   FF01:0:0:0:0:0:0:2
+                               FF02:0:0:0:0:0:0:2
+                               FF05:0:0:0:0:0:0:2
+
+   The above multicast addresses identify the group of all IPv6 routers,
+   within scope 1 (interface-local), 2 (link-local), or 5 (site-local).
+
+      Solicited-Node Address:  FF02:0:0:0:0:1:FFXX:XXXX
+
+   Solicited-node multicast address are computed as a function of a
+   node's unicast and anycast addresses.  A solicited-node multicast
+   address is formed by taking the low-order 24 bits of an address
+   (unicast or anycast) and appending those bits to the prefix
+   FF02:0:0:0:0:1:FF00::/104 resulting in a multicast address in the
+   range
+
+      FF02:0:0:0:0:1:FF00:0000
+
+   to
+
+      FF02:0:0:0:0:1:FFFF:FFFF
+
+
+
+
+<span class="grey">Hinden &amp; Deering            Standards Track                    [Page 16]</span>
+<a name="page-17" id="page-17" href="#page-17"><span class="break"> </span></a>
+<span class="grey"><a href="http://tools.ietf.org/html/rfc3513">RFC 3513</a>              IPv6 Addressing Architecture            April 2003</span>
+
+
+   For example, the solicited node multicast address corresponding to
+   the IPv6 address 4037::01:800:200E:8C6C is FF02::1:FF0E:8C6C.  IPv6
+   addresses that differ only in the high-order bits, e.g., due to
+   multiple high-order prefixes associated with different aggregations,
+   will map to the same solicited-node address thereby, reducing the
+   number of multicast addresses a node must join.
+
+   A node is required to compute and join (on the appropriate interface)
+   the associated Solicited-Node multicast addresses for every unicast
+   and anycast address it is assigned.
+
+<span class="h3"><h3><a name="section-2.8">2.8</a> A Node's Required Addresses</h3></span>
+
+   A host is required to recognize the following addresses as
+   identifying itself:
+
+      o  Its required Link-Local Address for each interface.
+      o  Any additional Unicast and Anycast Addresses that have been
+         configured for the node's interfaces (manually or
+         automatically).
+      o  The loopback address.
+      o  The All-Nodes Multicast Addresses defined in <a href="#section-2.7.1">section 2.7.1</a>.
+      o  The Solicited-Node Multicast Address for each of its unicast
+         and anycast addresses.
+      o  Multicast Addresses of all other groups to which the node
+         belongs.
+
+   A router is required to recognize all addresses that a host is
+   required to recognize, plus the following addresses as identifying
+   itself:
+
+      o  The Subnet-Router Anycast Addresses for all interfaces for
+         which it is configured to act as a router.
+      o  All other Anycast Addresses with which the router has been
+         configured.
+      o  The All-Routers Multicast Addresses defined in <a href="#section-2.7.1">section 2.7.1</a>.
+
+<span class="h2"><h2><a name="section-3">3</a>. Security Considerations</h2></span>
+
+   IPv6 addressing documents do not have any direct impact on Internet
+   infrastructure security.  Authentication of IPv6 packets is defined
+   in [<a href="#ref-AUTH" title="&quot;IP Authentication Header&quot;">AUTH</a>].
+
+
+
+
+
+
+
+
+
+<span class="grey">Hinden &amp; Deering            Standards Track                    [Page 17]</span>
+<a name="page-18" id="page-18" href="#page-18"><span class="break"> </span></a>
+<span class="grey"><a href="http://tools.ietf.org/html/rfc3513">RFC 3513</a>              IPv6 Addressing Architecture            April 2003</span>
+
+
+<span class="h2"><h2><a name="section-4">4</a>. IANA Considerations</h2></span>
+
+   The table and notes at <a href="http://www.isi.edu/in-notes/iana/assignments/ipv6-address-space.txt">http://www.isi.edu/in-</a>
+   <a href="http://www.isi.edu/in-notes/iana/assignments/ipv6-address-space.txt">notes/iana/assignments/ipv6-address-space.txt</a> should be replaced with
+   the following:
+
+   INTERNET PROTOCOL VERSION 6 ADDRESS SPACE
+
+   The initial assignment of IPv6 address space is as follows:
+
+   Allocation                            Prefix         Fraction of
+                                         (binary)       Address Space
+   -----------------------------------   --------       -------------
+   Unassigned (see Note 1 below)         0000 0000      1/256
+   Unassigned                            0000 0001      1/256
+   Reserved for NSAP Allocation          0000 001       1/128 [<a href="http://tools.ietf.org/html/rfc1888">RFC1888</a>]
+   Unassigned                            0000 01        1/64
+   Unassigned                            0000 1         1/32
+   Unassigned                            0001           1/16
+   Global Unicast                        001            1/8   [<a href="http://tools.ietf.org/html/rfc2374">RFC2374</a>]
+   Unassigned                            010            1/8
+   Unassigned                            011            1/8
+   Unassigned                            100            1/8
+   Unassigned                            101            1/8
+   Unassigned                            110            1/8
+   Unassigned                            1110           1/16
+   Unassigned                            1111 0         1/32
+   Unassigned                            1111 10        1/64
+   Unassigned                            1111 110       1/128
+   Unassigned                            1111 1110 0    1/512
+   Link-Local Unicast Addresses          1111 1110 10   1/1024
+   Site-Local Unicast Addresses          1111 1110 11   1/1024
+   Multicast Addresses                   1111 1111      1/256
+
+   Notes:
+
+   1. The "unspecified address", the "loopback address", and the IPv6
+      Addresses with Embedded IPv4 Addresses are assigned out of the
+      0000 0000 binary prefix space.
+
+   2. For now, IANA should limit its allocation of IPv6 unicast address
+      space to the range of addresses that start with binary value 001.
+      The rest of the global unicast address space (approximately 85% of
+      the IPv6 address space) is reserved for future definition and use,
+      and is not to be assigned by IANA at this time.
+
+
+
+
+
+
+<span class="grey">Hinden &amp; Deering            Standards Track                    [Page 18]</span>
+<a name="page-19" id="page-19" href="#page-19"><span class="break"> </span></a>
+<span class="grey"><a href="http://tools.ietf.org/html/rfc3513">RFC 3513</a>              IPv6 Addressing Architecture            April 2003</span>
+
+
+<span class="h2"><h2><a name="section-5">5</a>.  References</h2></span>
+
+<span class="h3"><h3><a name="section-5.1">5.1</a>  Normative References</h3></span>
+
+   [<a name="ref-IPV6" id="ref-IPV6">IPV6</a>]    Deering, S. and R. Hinden, "Internet Protocol, Version 6
+             (IPv6) Specification", <a href="http://tools.ietf.org/html/rfc2460">RFC 2460</a>, December 1998.
+
+   [<a name="ref-RFC2026" id="ref-RFC2026">RFC2026</a>] Bradner, S., "The Internet Standards Process -- Revision
+             3", <a href="http://tools.ietf.org/html/bcp9">BCP 9</a> , <a href="http://tools.ietf.org/html/rfc2026">RFC 2026</a>, October 1996.
+
+<span class="h3"><h3><a name="section-5.2">5.2</a>  Informative References</h3></span>
+
+   [<a name="ref-ANYCST" id="ref-ANYCST">ANYCST</a>]  Partridge, C., Mendez, T. and W. Milliken, "Host Anycasting
+             Service", <a href="http://tools.ietf.org/html/rfc1546">RFC 1546</a>, November 1993.
+
+   [<a name="ref-AUTH" id="ref-AUTH">AUTH</a>]    Kent, S. and R. Atkinson, "IP Authentication Header", <a href="http://tools.ietf.org/html/rfc2402">RFC</a>
+             <a href="http://tools.ietf.org/html/rfc2402">2402</a>, November 1998.
+
+   [<a name="ref-AGGR" id="ref-AGGR">AGGR</a>]    Hinden, R., O'Dell, M. and S. Deering, "An Aggregatable
+             Global Unicast Address Format", <a href="http://tools.ietf.org/html/rfc2374">RFC 2374</a>, July 1998.
+
+   [<a name="ref-CIDR" id="ref-CIDR">CIDR</a>]    Fuller, V., Li, T., Yu, J. and K. Varadhan, "Classless
+             Inter-Domain Routing (CIDR): An Address Assignment and
+             Aggregation Strategy", <a href="http://tools.ietf.org/html/rfc1519">RFC 1519</a>, September 1993.
+
+   [<a name="ref-ETHER" id="ref-ETHER">ETHER</a>]   Crawford, M., "Transmission of IPv6 Packets over Ethernet
+             Networks", <a href="http://tools.ietf.org/html/rfc2464">RFC 2464</a>, December 1998.
+
+   [<a name="ref-EUI64" id="ref-EUI64">EUI64</a>]   IEEE, "Guidelines for 64-bit Global Identifier (EUI-64)
+             Registration Authority",
+             <a href="http://standards.ieee.org/regauth/oui/tutorials/EUI64.html">http://standards.ieee.org/regauth/oui/tutorials/EUI64.html</a>,
+             March 1997.
+
+   [<a name="ref-FDDI" id="ref-FDDI">FDDI</a>]    Crawford, M., "Transmission of IPv6 Packets over FDDI
+             Networks", <a href="http://tools.ietf.org/html/rfc2467">RFC 2467</a>, December 1998.
+
+   [<a name="ref-MASGN" id="ref-MASGN">MASGN</a>]   Hinden, R. and S. Deering, "IPv6 Multicast Address
+             Assignments", <a href="http://tools.ietf.org/html/rfc2375">RFC 2375</a>, July 1998.
+
+   [<a name="ref-NSAP" id="ref-NSAP">NSAP</a>]    Bound, J., Carpenter, B., Harrington, D., Houldsworth, J.
+             and A. Lloyd, "OSI NSAPs and IPv6", <a href="http://tools.ietf.org/html/rfc1888">RFC 1888</a>, August 1996.
+
+   [<a name="ref-PRIV" id="ref-PRIV">PRIV</a>]    Narten, T. and R. Draves, "Privacy Extensions for Stateless
+             Address Autoconfiguration in IPv6", <a href="http://tools.ietf.org/html/rfc3041">RFC 3041</a>, January 2001.
+
+   [<a name="ref-TOKEN" id="ref-TOKEN">TOKEN</a>]   Crawford, M., Narten, T. and S. Thomas, "Transmission of
+             IPv6 Packets over Token Ring Networks", <a href="http://tools.ietf.org/html/rfc2470">RFC 2470</a>, December
+             1998.
+
+
+
+<span class="grey">Hinden &amp; Deering            Standards Track                    [Page 19]</span>
+<a name="page-20" id="page-20" href="#page-20"><span class="break"> </span></a>
+<span class="grey"><a href="http://tools.ietf.org/html/rfc3513">RFC 3513</a>              IPv6 Addressing Architecture            April 2003</span>
+
+
+   [<a name="ref-TRAN" id="ref-TRAN">TRAN</a>]    Gilligan, R. and E. Nordmark, "Transition Mechanisms for
+             IPv6 Hosts and Routers", <a href="http://tools.ietf.org/html/rfc2893">RFC 2893</a>, August 2000.
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+<span class="grey">Hinden &amp; Deering            Standards Track                    [Page 20]</span>
+<a name="page-21" id="page-21" href="#page-21"><span class="break"> </span></a>
+<span class="grey"><a href="http://tools.ietf.org/html/rfc3513">RFC 3513</a>              IPv6 Addressing Architecture            April 2003</span>
+
+
+APPENDIX A: Creating Modified EUI-64 format Interface Identifiers
+
+   Depending on the characteristics of a specific link or node there are
+   a number of approaches for creating Modified EUI-64 format interface
+   identifiers.  This appendix describes some of these approaches.
+
+Links or Nodes with IEEE EUI-64 Identifiers
+
+   The only change needed to transform an IEEE EUI-64 identifier to an
+   interface identifier is to invert the "u" (universal/local) bit.  For
+   example, a globally unique IEEE EUI-64 identifier of the form:
+
+   |0              1|1              3|3              4|4              6|
+   |0              5|6              1|2              7|8              3|
+   +----------------+----------------+----------------+----------------+
+   |cccccc0gcccccccc|ccccccccmmmmmmmm|mmmmmmmmmmmmmmmm|mmmmmmmmmmmmmmmm|
+   +----------------+----------------+----------------+----------------+
+
+   where "c" are the bits of the assigned company_id, "0" is the value
+   of the universal/local bit to indicate global scope, "g" is
+   individual/group bit, and "m" are the bits of the manufacturer-
+   selected extension identifier.  The IPv6 interface identifier would
+   be of the form:
+
+   |0              1|1              3|3              4|4              6|
+   |0              5|6              1|2              7|8              3|
+   +----------------+----------------+----------------+----------------+
+   |cccccc1gcccccccc|ccccccccmmmmmmmm|mmmmmmmmmmmmmmmm|mmmmmmmmmmmmmmmm|
+   +----------------+----------------+----------------+----------------+
+
+   The only change is inverting the value of the universal/local bit.
+
+Links or Nodes with IEEE 802 48 bit MAC's
+
+   [<a name="ref-EUI64" id="ref-EUI64">EUI64</a>] defines a method to create a IEEE EUI-64 identifier from an
+   IEEE 48bit MAC identifier.  This is to insert two octets, with
+   hexadecimal values of 0xFF and 0xFE, in the middle of the 48 bit MAC
+   (between the company_id and vendor supplied id).  For example, the 48
+   bit IEEE MAC with global scope:
+
+
+
+
+
+
+
+
+
+
+
+
+<span class="grey">Hinden &amp; Deering            Standards Track                    [Page 21]</span>
+<a name="page-22" id="page-22" href="#page-22"><span class="break"> </span></a>
+<span class="grey"><a href="http://tools.ietf.org/html/rfc3513">RFC 3513</a>              IPv6 Addressing Architecture            April 2003</span>
+
+
+   |0              1|1              3|3              4|
+   |0              5|6              1|2              7|
+   +----------------+----------------+----------------+
+   |cccccc0gcccccccc|ccccccccmmmmmmmm|mmmmmmmmmmmmmmmm|
+   +----------------+----------------+----------------+
+
+   where "c" are the bits of the assigned company_id, "0" is the value
+   of the universal/local bit to indicate global scope, "g" is
+   individual/group bit, and "m" are the bits of the manufacturer-
+   selected extension identifier.  The interface identifier would be of
+   the form:
+
+   |0              1|1              3|3              4|4              6|
+   |0              5|6              1|2              7|8              3|
+   +----------------+----------------+----------------+----------------+
+   |cccccc1gcccccccc|cccccccc11111111|11111110mmmmmmmm|mmmmmmmmmmmmmmmm|
+   +----------------+----------------+----------------+----------------+
+
+   When IEEE 802 48bit MAC addresses are available (on an interface or a
+   node), an implementation may use them to create interface identifiers
+   due to their availability and uniqueness properties.
+
+Links with Other Kinds of Identifiers
+
+   There are a number of types of links that have link-layer interface
+   identifiers other than IEEE EIU-64 or IEEE 802 48-bit MACs.  Examples
+   include LocalTalk and Arcnet.  The method to create an Modified EUI-
+   64 format identifier is to take the link identifier (e.g., the
+   LocalTalk 8 bit node identifier) and zero fill it to the left.  For
+   example, a LocalTalk 8 bit node identifier of hexadecimal value 0x4F
+   results in the following interface identifier:
+
+   |0              1|1              3|3              4|4              6|
+   |0              5|6              1|2              7|8              3|
+   +----------------+----------------+----------------+----------------+
+   |0000000000000000|0000000000000000|0000000000000000|0000000001001111|
+   +----------------+----------------+----------------+----------------+
+
+   Note that this results in the universal/local bit set to "0" to
+   indicate local scope.
+
+Links without Identifiers
+
+   There are a number of links that do not have any type of built-in
+   identifier.  The most common of these are serial links and configured
+   tunnels.  Interface identifiers must be chosen that are unique within
+   a subnet-prefix.
+
+
+
+
+<span class="grey">Hinden &amp; Deering            Standards Track                    [Page 22]</span>
+<a name="page-23" id="page-23" href="#page-23"><span class="break"> </span></a>
+<span class="grey"><a href="http://tools.ietf.org/html/rfc3513">RFC 3513</a>              IPv6 Addressing Architecture            April 2003</span>
+
+
+   When no built-in identifier is available on a link the preferred
+   approach is to use a global interface identifier from another
+   interface or one which is assigned to the node itself.  When using
+   this approach no other interface connecting the same node to the same
+   subnet-prefix may use the same identifier.
+
+   If there is no global interface identifier available for use on the
+   link the implementation needs to create a local-scope interface
+   identifier.  The only requirement is that it be unique within a
+   subnet prefix.  There are many possible approaches to select a
+   subnet-prefix-unique interface identifier.  These include:
+
+      Manual Configuration
+      Node Serial Number
+      Other node-specific token
+
+   The subnet-prefix-unique interface identifier should be generated in
+   a manner that it does not change after a reboot of a node or if
+   interfaces are added or deleted from the node.
+
+   The selection of the appropriate algorithm is link and implementation
+   dependent.  The details on forming interface identifiers are defined
+   in the appropriate "IPv6 over &lt;link&gt;" specification.  It is strongly
+   recommended that a collision detection algorithm be implemented as
+   part of any automatic algorithm.
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+<span class="grey">Hinden &amp; Deering            Standards Track                    [Page 23]</span>
+<a name="page-24" id="page-24" href="#page-24"><span class="break"> </span></a>
+<span class="grey"><a href="http://tools.ietf.org/html/rfc3513">RFC 3513</a>              IPv6 Addressing Architecture            April 2003</span>
+
+
+APPENDIX B: Changes from <a href="http://tools.ietf.org/html/rfc2373">RFC-2373</a>
+
+   The following changes were made from <a href="http://tools.ietf.org/html/rfc2373">RFC-2373</a> "IP Version 6
+   Addressing Architecture":
+
+   -  Clarified text in <a href="#section-2.2">section 2.2</a> to allow "::" to represent one or
+      more groups of 16 bits of zeros.
+   -  Changed uniqueness requirement of Interface Identifiers from
+      unique on a link to unique within a subnet prefix.  Also added a
+      recommendation that the same interface identifier not be assigned
+      to different machines on a link.
+   -  Change site-local format to make the subnet ID field 54-bit long
+      and remove the 38-bit zero's field.
+   -  Added description of multicast scop values and rules to handle the
+      reserved scop value 0.
+   -  Revised sections 2.4 and 2.5.6 to simplify and clarify how
+      different address types  are identified.  This was done to insure
+      that implementations do not build in any knowledge about global
+      unicast format prefixes.  Changes include:
+         o  Removed Format Prefix (FP) terminology
+         o  Revised list of address types to only include exceptions to
+            global unicast and a singe entry that identifies everything
+            else as Global Unicast.
+         o  Removed list of defined prefix exceptions from <a href="#section-2.5.6">section 2.5.6</a>
+            as it is now the main part of <a href="#section-2.4">section 2.4</a>.
+   -  Clarified text relating to EUI-64 identifiers to distinguish
+      between IPv6's "Modified EUI-64 format" identifiers and IEEE EUI-
+      64 identifiers.
+   -  Combined the sections on the Global Unicast Addresses and NSAP
+      Addresses into a single section on Global Unicast Addresses,
+      generalized the Global Unicast format, and cited [<a href="#ref-AGGR" title="&quot;An Aggregatable Global Unicast Address Format&quot;">AGGR</a>] and [<a href="#ref-NSAP" title="&quot;OSI NSAPs and IPv6&quot;">NSAP</a>]
+      as examples.
+   -  Reordered sections 2.5.4 and 2.5.5.
+   -  Removed <a href="#section-2.7.2">section 2.7.2</a> Assignment of New IPv6 Multicast Addresses
+      because this is being redefined elsewhere.
+   -  Added an IANA considerations section that updates the IANA IPv6
+      address allocations and documents the NSAP and AGGR allocations.
+   -  Added clarification that the "IPv4-compatible IPv6 address" must
+      use global IPv4 unicast addresses.
+   -  Divided references in to normative and non-normative sections.
+   -  Added reference to [<a href="#ref-PRIV" title="&quot;Privacy Extensions for Stateless Address Autoconfiguration in IPv6&quot;">PRIV</a>] in <a href="#section-2.5.1">section 2.5.1</a>
+   -  Added clarification that routers must not forward multicast
+      packets outside of the scope indicated in the multicast address.
+   -  Added clarification that routers must not forward packets with
+       source address of the unspecified address.
+   -  Added clarification that routers must drop packets received on an
+      interface with destination address of loopback.
+   -  Clarified the definition of IPv4-mapped addresses.
+
+
+
+<span class="grey">Hinden &amp; Deering            Standards Track                    [Page 24]</span>
+<a name="page-25" id="page-25" href="#page-25"><span class="break"> </span></a>
+<span class="grey"><a href="http://tools.ietf.org/html/rfc3513">RFC 3513</a>              IPv6 Addressing Architecture            April 2003</span>
+
+
+   -  Removed the ABNF Description of Text Representations Appendix.
+   -  Removed the address block reserved for IPX addresses.
+   -  Multicast scope changes:
+         o  Changed name of scope value 1 from "node-local" to
+            "interface-local"
+         o  Defined scope value 4 as "admin-local"
+   -  Corrected reference to <a href="http://tools.ietf.org/html/rfc1933">RFC1933</a> and updated references.
+   -  Many small changes to clarify and make the text more consistent.
+
+Authors' Addresses
+
+   Robert M. Hinden
+   Nokia
+   313 Fairchild Drive
+   Mountain View, CA 94043
+   USA
+
+   Phone: +1 650 625-2004
+   EMail: hinden@iprg.nokia.com
+
+
+   Stephen E. Deering
+   Cisco Systems, Inc.
+   170 West Tasman Drive
+   San Jose, CA 95134-1706
+   USA
+
+   Phone: +1 408 527-8213
+   EMail: deering@cisco.com
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+<span class="grey">Hinden &amp; Deering            Standards Track                    [Page 25]</span>
+<a name="page-26" id="page-26" href="#page-26"><span class="break"> </span></a>
+<span class="grey"><a href="http://tools.ietf.org/html/rfc3513">RFC 3513</a>              IPv6 Addressing Architecture            April 2003</span>
+
+
+Full Copyright Statement
+
+   Copyright (C) The Internet Society (2003).  All Rights Reserved.
+
+   This document and translations of it may be copied and furnished to
+   others, and derivative works that comment on or otherwise explain it
+   or assist in its implementation may be prepared, copied, published
+   and distributed, in whole or in part, without restriction of any
+   kind, provided that the above copyright notice and this paragraph are
+   included on all such copies and derivative works.  However, this
+   document itself may not be modified in any way, such as by removing
+   the copyright notice or references to the Internet Society or other
+   Internet organizations, except as needed for the purpose of
+   developing Internet standards in which case the procedures for
+   copyrights defined in the Internet Standards process must be
+   followed, or as required to translate it into languages other than
+   English.
+
+   The limited permissions granted above are perpetual and will not be
+   revoked by the Internet Society or its successors or assigns.
+
+   This document and the information contained herein is provided on an
+   "AS IS" basis and THE INTERNET SOCIETY AND THE INTERNET ENGINEERING
+   TASK FORCE DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING
+   BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE INFORMATION
+   HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED WARRANTIES OF
+   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
+
+Acknowledgement
+
+   Funding for the RFC Editor function is currently provided by the
+   Internet Society.
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+Hinden &amp; Deering            Standards Track                    [Page 26]
+<span class="break"> </span>
+
+</pre><br>
+<span class="noprint"><small><small>Html markup produced by rfcmarkup 1.46, available from
+<a href="http://tools.ietf.org/tools/rfcmarkup/">http://tools.ietf.org/tools/rfcmarkup/</a>
+</small></small></span>
+
+</body></html>
\ No newline at end of file
diff -Nru /tmp/bxdedfLB6u/uriparser-0.6.0/doc/rfc3986_grammar_only.txt /tmp/fLjZ2dz9P3/uriparser-0.7.4/doc/rfc3986_grammar_only.txt
--- uriparser-0.6.0/doc/rfc3986_grammar_only.txt	1970-01-01 01:00:00.000000000 +0100
+++ uriparser-0.7.4/doc/rfc3986_grammar_only.txt	2009-05-19 07:12:08.000000000 +0100
@@ -0,0 +1,80 @@
+URI           = scheme ":" hier-part [ "?" query ] [ "#" fragment ]
+
+hier-part     = "//" authority path-abempty
+              / path-absolute
+              / path-rootless
+              / path-empty
+
+URI-reference = URI / relative-ref
+
+absolute-URI  = scheme ":" hier-part [ "?" query ]
+
+relative-ref  = relative-part [ "?" query ] [ "#" fragment ]
+
+relative-part = "//" authority path-abempty
+              / path-absolute
+              / path-noscheme
+              / path-empty
+
+scheme        = ALPHA *( ALPHA / DIGIT / "+" / "-" / "." )
+
+authority     = [ userinfo "@" ] host [ ":" port ]
+userinfo      = *( unreserved / pct-encoded / sub-delims / ":" )
+host          = IP-literal / IPv4address / reg-name
+port          = *DIGIT
+
+IP-literal    = "[" ( IPv6address / IPvFuture  ) "]"
+
+IPvFuture     = "v" 1*HEXDIG "." 1*( unreserved / sub-delims / ":" )
+
+IPv6address   =                            6( h16 ":" ) ls32
+              /                       "::" 5( h16 ":" ) ls32
+              / [               h16 ] "::" 4( h16 ":" ) ls32
+              / [ *1( h16 ":" ) h16 ] "::" 3( h16 ":" ) ls32
+              / [ *2( h16 ":" ) h16 ] "::" 2( h16 ":" ) ls32
+              / [ *3( h16 ":" ) h16 ] "::"    h16 ":"   ls32
+              / [ *4( h16 ":" ) h16 ] "::"              ls32
+              / [ *5( h16 ":" ) h16 ] "::"              h16
+              / [ *6( h16 ":" ) h16 ] "::"
+
+h16           = 1*4HEXDIG
+ls32          = ( h16 ":" h16 ) / IPv4address
+IPv4address   = dec-octet "." dec-octet "." dec-octet "." dec-octet
+dec-octet     = DIGIT                 ; 0-9
+              / %x31-39 DIGIT         ; 10-99
+              / "1" 2DIGIT            ; 100-199
+              / "2" %x30-34 DIGIT     ; 200-249
+              / "25" %x30-35          ; 250-255
+
+reg-name      = *( unreserved / pct-encoded / sub-delims )
+
+path          = path-abempty    ; begins with "/" or is empty
+              / path-absolute   ; begins with "/" but not "//"
+              / path-noscheme   ; begins with a non-colon segment
+              / path-rootless   ; begins with a segment
+              / path-empty      ; zero characters
+
+path-abempty  = *( "/" segment )
+path-absolute = "/" [ segment-nz *( "/" segment ) ]
+path-noscheme = segment-nz-nc *( "/" segment )
+path-rootless = segment-nz *( "/" segment )
+path-empty    = 0<pchar>
+
+segment       = *pchar
+segment-nz    = 1*pchar
+segment-nz-nc = 1*( unreserved / pct-encoded / sub-delims / "@" )
+              ; non-zero-length segment without any colon ":"
+
+pchar         = unreserved / pct-encoded / sub-delims / ":" / "@"
+
+query         = *( pchar / "/" / "?" )
+
+fragment      = *( pchar / "/" / "?" )
+
+pct-encoded   = "%" HEXDIG HEXDIG
+
+unreserved    = ALPHA / DIGIT / "-" / "." / "_" / "~"
+reserved      = gen-delims / sub-delims
+gen-delims    = ":" / "/" / "?" / "#" / "[" / "]" / "@"
+sub-delims    = "!" / "$" / "&" / "'" / "(" / ")"
+              / "*" / "+" / "," / ";" / "="
diff -Nru /tmp/bxdedfLB6u/uriparser-0.6.0/doc/rfc3986.htm /tmp/fLjZ2dz9P3/uriparser-0.7.4/doc/rfc3986.htm
--- uriparser-0.6.0/doc/rfc3986.htm	1970-01-01 01:00:00.000000000 +0100
+++ uriparser-0.7.4/doc/rfc3986.htm	2009-05-19 07:12:08.000000000 +0100
@@ -0,0 +1,3539 @@
+<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
+<html xml:lang="en" lang="en"><head>
+
+
+    <meta http-equiv="Content-Type" content="text/html; charset=us-ascii">
+    <meta name="robots" content="index,follow">
+    <meta name="creator" content="rfcmarkup version 1.46">
+    <link rel="icon" href="http://tools.ietf.org/images/rfc.png" type="image/png">
+    <link rel="shortcut icon" href="http://tools.ietf.org/images/rfc.png" type="image/png"><title>RFC 3986 Uniform Resource Identifier (URI): Generic Syntax</title>
+    
+    
+    <style type="text/css">
+	body {
+	    margin: 0px 8px;
+            font-size: 1em;
+	}
+        h1, h2, h3, h4, h5, h6, .h1, .h2, .h3, .h4, .h5, .h6 {
+	    font-weight: bold;
+            line-height: 0pt;
+            display: inline;
+            white-space: pre;
+            font-family: monospace;
+            font-size: 1em;
+	    font-weight: bold;
+        }
+        pre {
+            font-size: 1em;
+        }
+	.pre {
+	    white-space: pre;
+	    font-family: monospace;
+	}
+	.header{
+	    font-weight: bold;
+	}
+        @media print {
+            body {
+                font-size: 10.5pt;
+            }
+            h1, h2, h3, h4, h5, h6 {
+                font-size: 10.5pt;
+            }
+        
+            a:link, a:visited {
+                color: inherit;
+                text-decoration: none;
+            }
+	    .break {
+		page-break-before: always;
+                text-decoration: none;
+	    }
+            .noprint {
+                display: none;
+            }
+        }
+	@media screen {
+	    .grey, .grey a:link, .grey a:visited {
+		color: #777;
+	    }
+	    .break {
+                text-decoration: none;
+                display: none;
+	    }            
+            .docinfo {
+                background-color: #EEE;
+            }
+            .top {
+                border-top: 2px solid #EEE;
+            }
+            .bgwhite  { background-color: white; }
+            .bgred    { background-color: #F44; }
+            .bggrey   { background-color: #666; }
+            .bgbrown  { background-color: #840; }            
+            .bgorange { background-color: #FA0; }
+            .bgyellow { background-color: #EE0; }
+            .bgmagenta{ background-color: #F4F; }
+            .bgblue   { background-color: #66F; }
+            .bgcyan   { background-color: #4DD; }
+            .bggreen  { background-color: #4F4; }
+
+            .legend   { font-size: 90%; }
+            .cplate   { font-size: 70%; border: solid grey 1px; }
+	}
+    </style>
+
+    <script type="text/javascript"><!--
+    function addHeaderTags() {
+	var spans = document.getElementsByTagName("span");
+	for (var i=0; i < spans.length; i++) {
+	    var elem = spans[i];
+	    if (elem) {
+		var level = elem.getAttribute("class");
+                if (level == "h1" || level == "h2" || level == "h3" || level == "h4" || level == "h5" || level == "h6") {
+                    elem.innerHTML = "<"+level+">"+elem.innerHTML+"</"+level+">";		
+                }
+	    }
+	}
+    }
+    var legend_html = "Colour legend:<br />      <table>         <tr><td>Unknown:</td>          <td><span class='cplate bgwhite'>&nbsp;&nbsp;&nbsp;&nbsp;</span></td></tr>         <tr><td>Draft:</td>            <td><span class='cplate bgred'>&nbsp;&nbsp;&nbsp;&nbsp;</span></td></tr>         <tr><td>Informational:</td>    <td><span class='cplate bgorange'>&nbsp;&nbsp;&nbsp;&nbsp;</span></td></tr>         <tr><td>Experimental:</td>     <td><span class='cplate bgyellow'>&nbsp;&nbsp;&nbsp;&nbsp;</span></td></tr>         <tr><td>Best Common Practice:</td><td><span class='cplate bgmagenta'>&nbsp;&nbsp;&nbsp;&nbsp;</span></td></tr>         <tr><td>Proposed Standard:</td><td><span class='cplate bgblue'>&nbsp;&nbsp;&nbsp;&nbsp;</span></td></tr>         <tr><td>Draft Standard:</td>   <td><span class='cplate bgcyan'>&nbsp;&nbsp;&nbsp;&nbsp;</span></td></tr>         <tr><td>Standard:</td>         <td><span class='cplate bggreen'>&nbsp;&nbsp;&nbsp;&nbsp;</span></td></tr>         <tr><td>Historic:</td>         <td><span class='cplate bggrey'>&nbsp;&nbsp;&nbsp;&nbsp;</span></td></tr>         <tr><td>Obsolete:</td>         <td><span class='cplate bgbrown'>&nbsp;&nbsp;&nbsp;&nbsp;</span></td></tr>     </table>";
+    function showElem(id) {
+        var elem = document.getElementById(id);
+        elem.innerHTML = eval(id+"_html");
+        elem.style.visibility='visible';
+    }
+    function hideElem(id) {
+        var elem = document.getElementById(id);
+        elem.style.visibility='hidden';        
+        elem.innerHTML = "";
+    }
+    // -->
+    </script></head><body onload="addHeaderTags()">
+   <div style="height: 8px;">
+      <span style="cursor: pointer;" onmouseover="this.style.cursor='pointer';" onclick="showElem('legend');" onmouseout="hideElem('legend')" class="pre noprint docinfo bggreen" title="Click for colour legend.">                                                                        </span>
+      <div id="legend" class="docinfo noprint pre legend" style="border: 1px solid rgb(51, 68, 85); padding: 4px 9px 5px 7px; position: absolute; top: 4px; left: 4ex; visibility: hidden; background-color: white;" onmouseover="showElem('legend');" onmouseout="hideElem('legend');"></div>
+   </div>
+<span class="pre noprint docinfo top">[<a href="http://tools.ietf.org/html/">RFCs/IDs</a>] [<a href="http://tools.ietf.org/rfc/rfc3986.txt">Plain Text</a>] [From <a href="http://tools.ietf.org/html/draft-fielding-uri-rfc2396bis">draft-fielding-uri-rfc2396bis</a>]            </span><br>
+<span class="pre noprint docinfo">                                                                        </span><br>
+<span class="pre noprint docinfo">                                                                STANDARD</span><br>
+<span class="pre noprint docinfo">                                                                        </span><br>
+<pre>Network Working Group                                     T. Berners-Lee
+Request for Comments: 3986                                       W3C/MIT
+STD: 66                                                      R. Fielding
+Updates: <a href="http://tools.ietf.org/html/rfc1738">1738</a>                                               Day Software
+Obsoletes: <a href="http://tools.ietf.org/html/rfc2732">2732</a>, <a href="http://tools.ietf.org/html/rfc2396">2396</a>, <a href="http://tools.ietf.org/html/rfc1808">1808</a>                                  L. Masinter
+Category: Standards Track                                  Adobe Systems
+                                                            January 2005
+
+
+           <span class="h1"><h1>Uniform Resource Identifier (URI): Generic Syntax</h1></span>
+
+Status of This Memo
+
+   This document specifies an Internet standards track protocol for the
+   Internet community, and requests discussion and suggestions for
+   improvements.  Please refer to the current edition of the "Internet
+   Official Protocol Standards" (STD 1) for the standardization state
+   and status of this protocol.  Distribution of this memo is unlimited.
+
+Copyright Notice
+
+   Copyright (C) The Internet Society (2005).
+
+Abstract
+
+   A Uniform Resource Identifier (URI) is a compact sequence of
+   characters that identifies an abstract or physical resource.  This
+   specification defines the generic URI syntax and a process for
+   resolving URI references that might be in relative form, along with
+   guidelines and security considerations for the use of URIs on the
+   Internet.  The URI syntax defines a grammar that is a superset of all
+   valid URIs, allowing an implementation to parse the common components
+   of a URI reference without knowing the scheme-specific requirements
+   of every possible identifier.  This specification does not define a
+   generative grammar for URIs; that task is performed by the individual
+   specifications of each URI scheme.
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+<span class="grey">Berners-Lee, et al.         Standards Track                     [Page 1]</span>
+<a name="page-2" id="page-2" href="#page-2"><span class="break"> </span></a>
+<span class="grey"><a href="http://tools.ietf.org/html/rfc3986">RFC 3986</a>                   URI Generic Syntax               January 2005</span>
+
+
+Table of Contents
+
+   <a href="#section-1">1</a>.  Introduction . . . . . . . . . . . . . . . . . . . . . . . . .  <a href="#page-4">4</a>
+       <a href="#section-1.1">1.1</a>.  Overview of URIs . . . . . . . . . . . . . . . . . . . .  <a href="#page-4">4</a>
+             <a href="#section-1.1.1">1.1.1</a>.  Generic Syntax . . . . . . . . . . . . . . . . .  <a href="#page-6">6</a>
+             <a href="#section-1.1.2">1.1.2</a>.  Examples . . . . . . . . . . . . . . . . . . . .  <a href="#page-7">7</a>
+             <a href="#section-1.1.3">1.1.3</a>.  URI, URL, and URN  . . . . . . . . . . . . . . .  <a href="#page-7">7</a>
+       <a href="#section-1.2">1.2</a>.  Design Considerations  . . . . . . . . . . . . . . . . .  <a href="#page-8">8</a>
+             <a href="#section-1.2.1">1.2.1</a>.  Transcription  . . . . . . . . . . . . . . . . .  <a href="#page-8">8</a>
+             <a href="#section-1.2.2">1.2.2</a>.  Separating Identification from Interaction . . .  <a href="#page-9">9</a>
+             <a href="#section-1.2.3">1.2.3</a>.  Hierarchical Identifiers . . . . . . . . . . . . <a href="#page-10">10</a>
+       <a href="#section-1.3">1.3</a>.  Syntax Notation  . . . . . . . . . . . . . . . . . . . . <a href="#page-11">11</a>
+   <a href="#section-2">2</a>.  Characters . . . . . . . . . . . . . . . . . . . . . . . . . . <a href="#page-11">11</a>
+       <a href="#section-2.1">2.1</a>.  Percent-Encoding . . . . . . . . . . . . . . . . . . . . <a href="#page-12">12</a>
+       <a href="#section-2.2">2.2</a>.  Reserved Characters  . . . . . . . . . . . . . . . . . . <a href="#page-12">12</a>
+       <a href="#section-2.3">2.3</a>.  Unreserved Characters  . . . . . . . . . . . . . . . . . <a href="#page-13">13</a>
+       <a href="#section-2.4">2.4</a>.  When to Encode or Decode . . . . . . . . . . . . . . . . <a href="#page-14">14</a>
+       <a href="#section-2.5">2.5</a>.  Identifying Data . . . . . . . . . . . . . . . . . . . . <a href="#page-14">14</a>
+   <a href="#section-3">3</a>.  Syntax Components  . . . . . . . . . . . . . . . . . . . . . . <a href="#page-16">16</a>
+       <a href="#section-3.1">3.1</a>.  Scheme . . . . . . . . . . . . . . . . . . . . . . . . . <a href="#page-17">17</a>
+       <a href="#section-3.2">3.2</a>.  Authority  . . . . . . . . . . . . . . . . . . . . . . . <a href="#page-17">17</a>
+             <a href="#section-3.2.1">3.2.1</a>.  User Information . . . . . . . . . . . . . . . . <a href="#page-18">18</a>
+             <a href="#section-3.2.2">3.2.2</a>.  Host . . . . . . . . . . . . . . . . . . . . . . <a href="#page-18">18</a>
+             <a href="#section-3.2.3">3.2.3</a>.  Port . . . . . . . . . . . . . . . . . . . . . . <a href="#page-22">22</a>
+       <a href="#section-3.3">3.3</a>.  Path . . . . . . . . . . . . . . . . . . . . . . . . . . <a href="#page-22">22</a>
+       <a href="#section-3.4">3.4</a>.  Query  . . . . . . . . . . . . . . . . . . . . . . . . . <a href="#page-23">23</a>
+       <a href="#section-3.5">3.5</a>.  Fragment . . . . . . . . . . . . . . . . . . . . . . . . <a href="#page-24">24</a>
+   <a href="#section-4">4</a>.  Usage  . . . . . . . . . . . . . . . . . . . . . . . . . . . . <a href="#page-25">25</a>
+       <a href="#section-4.1">4.1</a>.  URI Reference  . . . . . . . . . . . . . . . . . . . . . <a href="#page-25">25</a>
+       <a href="#section-4.2">4.2</a>.  Relative Reference . . . . . . . . . . . . . . . . . . . <a href="#page-26">26</a>
+       <a href="#section-4.3">4.3</a>.  Absolute URI . . . . . . . . . . . . . . . . . . . . . . <a href="#page-27">27</a>
+       <a href="#section-4.4">4.4</a>.  Same-Document Reference  . . . . . . . . . . . . . . . . <a href="#page-27">27</a>
+       <a href="#section-4.5">4.5</a>.  Suffix Reference . . . . . . . . . . . . . . . . . . . . <a href="#page-27">27</a>
+   <a href="#section-5">5</a>.  Reference Resolution . . . . . . . . . . . . . . . . . . . . . <a href="#page-28">28</a>
+       <a href="#section-5.1">5.1</a>.  Establishing a Base URI  . . . . . . . . . . . . . . . . <a href="#page-28">28</a>
+             <a href="#section-5.1.1">5.1.1</a>.  Base URI Embedded in Content . . . . . . . . . . <a href="#page-29">29</a>
+             <a href="#section-5.1.2">5.1.2</a>.  Base URI from the Encapsulating Entity . . . . . <a href="#page-29">29</a>
+             <a href="#section-5.1.3">5.1.3</a>.  Base URI from the Retrieval URI  . . . . . . . . <a href="#page-30">30</a>
+             <a href="#section-5.1.4">5.1.4</a>.  Default Base URI . . . . . . . . . . . . . . . . <a href="#page-30">30</a>
+       <a href="#section-5.2">5.2</a>.  Relative Resolution  . . . . . . . . . . . . . . . . . . <a href="#page-30">30</a>
+             <a href="#section-5.2.1">5.2.1</a>.  Pre-parse the Base URI . . . . . . . . . . . . . <a href="#page-31">31</a>
+             <a href="#section-5.2.2">5.2.2</a>.  Transform References . . . . . . . . . . . . . . <a href="#page-31">31</a>
+             <a href="#section-5.2.3">5.2.3</a>.  Merge Paths  . . . . . . . . . . . . . . . . . . <a href="#page-32">32</a>
+             <a href="#section-5.2.4">5.2.4</a>.  Remove Dot Segments  . . . . . . . . . . . . . . <a href="#page-33">33</a>
+       <a href="#section-5.3">5.3</a>.  Component Recomposition  . . . . . . . . . . . . . . . . <a href="#page-35">35</a>
+       <a href="#section-5.4">5.4</a>.  Reference Resolution Examples  . . . . . . . . . . . . . <a href="#page-35">35</a>
+             <a href="#section-5.4.1">5.4.1</a>.  Normal Examples  . . . . . . . . . . . . . . . . <a href="#page-36">36</a>
+             <a href="#section-5.4.2">5.4.2</a>.  Abnormal Examples  . . . . . . . . . . . . . . . <a href="#page-36">36</a>
+
+
+
+<span class="grey">Berners-Lee, et al.         Standards Track                     [Page 2]</span>
+<a name="page-3" id="page-3" href="#page-3"><span class="break"> </span></a>
+<span class="grey"><a href="http://tools.ietf.org/html/rfc3986">RFC 3986</a>                   URI Generic Syntax               January 2005</span>
+
+
+   <a href="#section-6">6</a>.  Normalization and Comparison . . . . . . . . . . . . . . . . . <a href="#page-38">38</a>
+       <a href="#section-6.1">6.1</a>.  Equivalence  . . . . . . . . . . . . . . . . . . . . . . <a href="#page-38">38</a>
+       <a href="#section-6.2">6.2</a>.  Comparison Ladder  . . . . . . . . . . . . . . . . . . . <a href="#page-39">39</a>
+             <a href="#section-6.2.1">6.2.1</a>.  Simple String Comparison . . . . . . . . . . . . <a href="#page-39">39</a>
+             <a href="#section-6.2.2">6.2.2</a>.  Syntax-Based Normalization . . . . . . . . . . . <a href="#page-40">40</a>
+             <a href="#section-6.2.3">6.2.3</a>.  Scheme-Based Normalization . . . . . . . . . . . <a href="#page-41">41</a>
+             <a href="#section-6.2.4">6.2.4</a>.  Protocol-Based Normalization . . . . . . . . . . <a href="#page-42">42</a>
+   <a href="#section-7">7</a>.  Security Considerations  . . . . . . . . . . . . . . . . . . . <a href="#page-43">43</a>
+       <a href="#section-7.1">7.1</a>.  Reliability and Consistency  . . . . . . . . . . . . . . <a href="#page-43">43</a>
+       <a href="#section-7.2">7.2</a>.  Malicious Construction . . . . . . . . . . . . . . . . . <a href="#page-43">43</a>
+       <a href="#section-7.3">7.3</a>.  Back-End Transcoding . . . . . . . . . . . . . . . . . . <a href="#page-44">44</a>
+       <a href="#section-7.4">7.4</a>.  Rare IP Address Formats  . . . . . . . . . . . . . . . . <a href="#page-45">45</a>
+       <a href="#section-7.5">7.5</a>.  Sensitive Information  . . . . . . . . . . . . . . . . . <a href="#page-45">45</a>
+       <a href="#section-7.6">7.6</a>.  Semantic Attacks . . . . . . . . . . . . . . . . . . . . <a href="#page-45">45</a>
+   <a href="#section-8">8</a>.  IANA Considerations  . . . . . . . . . . . . . . . . . . . . . <a href="#page-46">46</a>
+   <a href="#section-9">9</a>.  Acknowledgements . . . . . . . . . . . . . . . . . . . . . . . <a href="#page-46">46</a>
+   <a href="#section-10">10</a>. References . . . . . . . . . . . . . . . . . . . . . . . . . . <a href="#page-46">46</a>
+       <a href="#section-10.1">10.1</a>. Normative References . . . . . . . . . . . . . . . . . . <a href="#page-46">46</a>
+       <a href="#section-10.2">10.2</a>. Informative References . . . . . . . . . . . . . . . . . <a href="#page-47">47</a>
+   A.  Collected ABNF for URI . . . . . . . . . . . . . . . . . . . . <a href="#page-49">49</a>
+   B.  Parsing a URI Reference with a Regular Expression  . . . . . . <a href="#page-50">50</a>
+   C.  Delimiting a URI in Context  . . . . . . . . . . . . . . . . . <a href="#page-51">51</a>
+   D.  Changes from <a href="http://tools.ietf.org/html/rfc2396">RFC 2396</a>  . . . . . . . . . . . . . . . . . . . . <a href="#page-53">53</a>
+       D.1.  Additions  . . . . . . . . . . . . . . . . . . . . . . . <a href="#page-53">53</a>
+       D.2.  Modifications  . . . . . . . . . . . . . . . . . . . . . <a href="#page-53">53</a>
+   Index  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . <a href="#page-56">56</a>
+   Authors' Addresses . . . . . . . . . . . . . . . . . . . . . . . . <a href="#page-60">60</a>
+   Full Copyright Statement . . . . . . . . . . . . . . . . . . . . . <a href="#page-61">61</a>
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+<span class="grey">Berners-Lee, et al.         Standards Track                     [Page 3]</span>
+<a name="page-4" id="page-4" href="#page-4"><span class="break"> </span></a>
+<span class="grey"><a href="http://tools.ietf.org/html/rfc3986">RFC 3986</a>                   URI Generic Syntax               January 2005</span>
+
+
+<span class="h2"><h2><a name="section-1">1</a>.  Introduction</h2></span>
+
+   A Uniform Resource Identifier (URI) provides a simple and extensible
+   means for identifying a resource.  This specification of URI syntax
+   and semantics is derived from concepts introduced by the World Wide
+   Web global information initiative, whose use of these identifiers
+   dates from 1990 and is described in "Universal Resource Identifiers
+   in WWW" [<a href="http://tools.ietf.org/html/rfc1630" title="&quot;Universal Resource Identifiers in WWW: A Unifying Syntax for the Expression of Names and Addresses of Objects on the Network as used in the World-Wide Web&quot;">RFC1630</a>].  The syntax is designed to meet the
+   recommendations laid out in "Functional Recommendations for Internet
+   Resource Locators" [<a href="http://tools.ietf.org/html/rfc1736" title="&quot;Functional Recommendations for Internet Resource Locators&quot;">RFC1736</a>] and "Functional Requirements for Uniform
+   Resource Names" [<a href="http://tools.ietf.org/html/rfc1737" title="&quot;Functional Requirements for Uniform Resource Names&quot;">RFC1737</a>].
+
+   This document obsoletes [<a href="http://tools.ietf.org/html/rfc2396" title="&quot;Uniform Resource Identifiers (URI): Generic Syntax&quot;">RFC2396</a>], which merged "Uniform Resource
+   Locators" [<a href="http://tools.ietf.org/html/rfc1738" title="&quot;Uniform Resource Locators (URL)&quot;">RFC1738</a>] and "Relative Uniform Resource Locators"
+   [<a href="http://tools.ietf.org/html/rfc1808" title="&quot;Relative Uniform Resource Locators&quot;">RFC1808</a>] in order to define a single, generic syntax for all URIs.
+   It obsoletes [<a href="http://tools.ietf.org/html/rfc2732" title="&quot;Format for Literal IPv6 Addresses in URL&amp;#39;s&quot;">RFC2732</a>], which introduced syntax for an IPv6 address.
+   It excludes portions of <a href="http://tools.ietf.org/html/rfc1738">RFC 1738</a> that defined the specific syntax of
+   individual URI schemes; those portions will be updated as separate
+   documents.  The process for registration of new URI schemes is
+   defined separately by [<a href="#ref-BCP35" title="&quot;Registration Procedures for URL Scheme Names&quot;">BCP35</a>].  Advice for designers of new URI
+   schemes can be found in [<a href="http://tools.ietf.org/html/rfc2718" title="&quot;Guidelines for new URL Schemes&quot;">RFC2718</a>].  All significant changes from <a href="http://tools.ietf.org/html/rfc2396">RFC</a>
+   <a href="http://tools.ietf.org/html/rfc2396">2396</a> are noted in Appendix D.
+
+   This specification uses the terms "character" and "coded character
+   set" in accordance with the definitions provided in [<a href="#ref-BCP19" title="&quot;IANA Charset Registration Procedures&quot;">BCP19</a>], and
+   "character encoding" in place of what [<a href="#ref-BCP19" title="&quot;IANA Charset Registration Procedures&quot;">BCP19</a>] refers to as a
+   "charset".
+
+<span class="h3"><h3><a name="section-1.1">1.1</a>.  Overview of URIs</h3></span>
+
+   URIs are characterized as follows:
+
+   Uniform
+
+      Uniformity provides several benefits.  It allows different types
+      of resource identifiers to be used in the same context, even when
+      the mechanisms used to access those resources may differ.  It
+      allows uniform semantic interpretation of common syntactic
+      conventions across different types of resource identifiers.  It
+      allows introduction of new types of resource identifiers without
+      interfering with the way that existing identifiers are used.  It
+      allows the identifiers to be reused in many different contexts,
+      thus permitting new applications or protocols to leverage a pre-
+      existing, large, and widely used set of resource identifiers.
+
+
+
+
+
+
+
+<span class="grey">Berners-Lee, et al.         Standards Track                     [Page 4]</span>
+<a name="page-5" id="page-5" href="#page-5"><span class="break"> </span></a>
+<span class="grey"><a href="http://tools.ietf.org/html/rfc3986">RFC 3986</a>                   URI Generic Syntax               January 2005</span>
+
+
+   Resource
+
+      This specification does not limit the scope of what might be a
+      resource; rather, the term "resource" is used in a general sense
+      for whatever might be identified by a URI.  Familiar examples
+      include an electronic document, an image, a source of information
+      with a consistent purpose (e.g., "today's weather report for Los
+      Angeles"), a service (e.g., an HTTP-to-SMS gateway), and a
+      collection of other resources.  A resource is not necessarily
+      accessible via the Internet; e.g., human beings, corporations, and
+      bound books in a library can also be resources.  Likewise,
+      abstract concepts can be resources, such as the operators and
+      operands of a mathematical equation, the types of a relationship
+      (e.g., "parent" or "employee"), or numeric values (e.g., zero,
+      one, and infinity).
+
+   Identifier
+
+      An identifier embodies the information required to distinguish
+      what is being identified from all other things within its scope of
+      identification.  Our use of the terms "identify" and "identifying"
+      refer to this purpose of distinguishing one resource from all
+      other resources, regardless of how that purpose is accomplished
+      (e.g., by name, address, or context).  These terms should not be
+      mistaken as an assumption that an identifier defines or embodies
+      the identity of what is referenced, though that may be the case
+      for some identifiers.  Nor should it be assumed that a system
+      using URIs will access the resource identified: in many cases,
+      URIs are used to denote resources without any intention that they
+      be accessed.  Likewise, the "one" resource identified might not be
+      singular in nature (e.g., a resource might be a named set or a
+      mapping that varies over time).
+
+   A URI is an identifier consisting of a sequence of characters
+   matching the syntax rule named &lt;URI&gt; in <a href="#section-3">Section 3</a>.  It enables
+   uniform identification of resources via a separately defined
+   extensible set of naming schemes (<a href="#section-3.1">Section 3.1</a>).  How that
+   identification is accomplished, assigned, or enabled is delegated to
+   each scheme specification.
+
+   This specification does not place any limits on the nature of a
+   resource, the reasons why an application might seek to refer to a
+   resource, or the kinds of systems that might use URIs for the sake of
+   identifying resources.  This specification does not require that a
+   URI persists in identifying the same resource over time, though that
+   is a common goal of all URI schemes.  Nevertheless, nothing in this
+
+
+
+
+
+<span class="grey">Berners-Lee, et al.         Standards Track                     [Page 5]</span>
+<a name="page-6" id="page-6" href="#page-6"><span class="break"> </span></a>
+<span class="grey"><a href="http://tools.ietf.org/html/rfc3986">RFC 3986</a>                   URI Generic Syntax               January 2005</span>
+
+
+   specification prevents an application from limiting itself to
+   particular types of resources, or to a subset of URIs that maintains
+   characteristics desired by that application.
+
+   URIs have a global scope and are interpreted consistently regardless
+   of context, though the result of that interpretation may be in
+   relation to the end-user's context.  For example, "<a href="http://localhost/">http://localhost/</a>"
+   has the same interpretation for every user of that reference, even
+   though the network interface corresponding to "localhost" may be
+   different for each end-user: interpretation is independent of access.
+   However, an action made on the basis of that reference will take
+   place in relation to the end-user's context, which implies that an
+   action intended to refer to a globally unique thing must use a URI
+   that distinguishes that resource from all other things.  URIs that
+   identify in relation to the end-user's local context should only be
+   used when the context itself is a defining aspect of the resource,
+   such as when an on-line help manual refers to a file on the end-
+   user's file system (e.g., "file:///etc/hosts").
+
+<span class="h4"><h4><a name="section-1.1.1">1.1.1</a>.  Generic Syntax</h4></span>
+
+   Each URI begins with a scheme name, as defined in <a href="#section-3.1">Section 3.1</a>, that
+   refers to a specification for assigning identifiers within that
+   scheme.  As such, the URI syntax is a federated and extensible naming
+   system wherein each scheme's specification may further restrict the
+   syntax and semantics of identifiers using that scheme.
+
+   This specification defines those elements of the URI syntax that are
+   required of all URI schemes or are common to many URI schemes.  It
+   thus defines the syntax and semantics needed to implement a scheme-
+   independent parsing mechanism for URI references, by which the
+   scheme-dependent handling of a URI can be postponed until the
+   scheme-dependent semantics are needed.  Likewise, protocols and data
+   formats that make use of URI references can refer to this
+   specification as a definition for the range of syntax allowed for all
+   URIs, including those schemes that have yet to be defined.  This
+   decouples the evolution of identification schemes from the evolution
+   of protocols, data formats, and implementations that make use of
+   URIs.
+
+   A parser of the generic URI syntax can parse any URI reference into
+   its major components.  Once the scheme is determined, further
+   scheme-specific parsing can be performed on the components.  In other
+   words, the URI generic syntax is a superset of the syntax of all URI
+   schemes.
+
+
+
+
+
+
+<span class="grey">Berners-Lee, et al.         Standards Track                     [Page 6]</span>
+<a name="page-7" id="page-7" href="#page-7"><span class="break"> </span></a>
+<span class="grey"><a href="http://tools.ietf.org/html/rfc3986">RFC 3986</a>                   URI Generic Syntax               January 2005</span>
+
+
+<span class="h4"><h4><a name="section-1.1.2">1.1.2</a>.  Examples</h4></span>
+
+   The following example URIs illustrate several URI schemes and
+   variations in their common syntax components:
+
+      <a href="ftp://ftp.is.co.za/rfc/rfc1808.txt">ftp://ftp.is.co.za/rfc/rfc1808.txt</a>
+
+      <a href="http://www.ietf.org/rfc/rfc2396.txt">http://www.ietf.org/rfc/rfc2396.txt</a>
+
+      ldap://[2001:db8::7]/c=GB?objectClass?one
+
+      mailto:John.Doe@example.com
+
+      news:comp.infosystems.www.servers.unix
+
+      tel:+1-816-555-1212
+
+      telnet://192.0.2.16:80/
+
+      urn:oasis:names:specification:docbook:dtd:xml:4.1.2
+
+
+<span class="h4"><h4><a name="section-1.1.3">1.1.3</a>.  URI, URL, and URN</h4></span>
+
+   A URI can be further classified as a locator, a name, or both.  The
+   term "Uniform Resource Locator" (URL) refers to the subset of URIs
+   that, in addition to identifying a resource, provide a means of
+   locating the resource by describing its primary access mechanism
+   (e.g., its network "location").  The term "Uniform Resource Name"
+   (URN) has been used historically to refer to both URIs under the
+   "urn" scheme [<a href="http://tools.ietf.org/html/rfc2141" title="&quot;URN Syntax&quot;">RFC2141</a>], which are required to remain globally unique
+   and persistent even when the resource ceases to exist or becomes
+   unavailable, and to any other URI with the properties of a name.
+
+   An individual scheme does not have to be classified as being just one
+   of "name" or "locator".  Instances of URIs from any given scheme may
+   have the characteristics of names or locators or both, often
+   depending on the persistence and care in the assignment of
+   identifiers by the naming authority, rather than on any quality of
+   the scheme.  Future specifications and related documentation should
+   use the general term "URI" rather than the more restrictive terms
+   "URL" and "URN" [<a href="http://tools.ietf.org/html/rfc3305" title="&quot;Report from the Joint W3C/IETF URI Planning Interest Group: Uniform Resource Identifiers (URIs), URLs, and Uniform Resource Names (URNs): Clarifications and Recommendations&quot;">RFC3305</a>].
+
+
+
+
+
+
+
+
+
+<span class="grey">Berners-Lee, et al.         Standards Track                     [Page 7]</span>
+<a name="page-8" id="page-8" href="#page-8"><span class="break"> </span></a>
+<span class="grey"><a href="http://tools.ietf.org/html/rfc3986">RFC 3986</a>                   URI Generic Syntax               January 2005</span>
+
+
+<span class="h3"><h3><a name="section-1.2">1.2</a>.  Design Considerations</h3></span>
+
+<span class="h4"><h4><a name="section-1.2.1">1.2.1</a>.  Transcription</h4></span>
+
+   The URI syntax has been designed with global transcription as one of
+   its main considerations.  A URI is a sequence of characters from a
+   very limited set: the letters of the basic Latin alphabet, digits,
+   and a few special characters.  A URI may be represented in a variety
+   of ways; e.g., ink on paper, pixels on a screen, or a sequence of
+   character encoding octets.  The interpretation of a URI depends only
+   on the characters used and not on how those characters are
+   represented in a network protocol.
+
+   The goal of transcription can be described by a simple scenario.
+   Imagine two colleagues, Sam and Kim, sitting in a pub at an
+   international conference and exchanging research ideas.  Sam asks Kim
+   for a location to get more information, so Kim writes the URI for the
+   research site on a napkin.  Upon returning home, Sam takes out the
+   napkin and types the URI into a computer, which then retrieves the
+   information to which Kim referred.
+
+   There are several design considerations revealed by the scenario:
+
+   o  A URI is a sequence of characters that is not always represented
+      as a sequence of octets.
+
+   o  A URI might be transcribed from a non-network source and thus
+      should consist of characters that are most likely able to be
+      entered into a computer, within the constraints imposed by
+      keyboards (and related input devices) across languages and
+      locales.
+
+   o  A URI often has to be remembered by people, and it is easier for
+      people to remember a URI when it consists of meaningful or
+      familiar components.
+
+   These design considerations are not always in alignment.  For
+   example, it is often the case that the most meaningful name for a URI
+   component would require characters that cannot be typed into some
+   systems.  The ability to transcribe a resource identifier from one
+   medium to another has been considered more important than having a
+   URI consist of the most meaningful of components.
+
+   In local or regional contexts and with improving technology, users
+   might benefit from being able to use a wider range of characters;
+   such use is not defined by this specification.  Percent-encoded
+   octets (<a href="#section-2.1">Section 2.1</a>) may be used within a URI to represent characters
+   outside the range of the US-ASCII coded character set if this
+
+
+
+<span class="grey">Berners-Lee, et al.         Standards Track                     [Page 8]</span>
+<a name="page-9" id="page-9" href="#page-9"><span class="break"> </span></a>
+<span class="grey"><a href="http://tools.ietf.org/html/rfc3986">RFC 3986</a>                   URI Generic Syntax               January 2005</span>
+
+
+   representation is allowed by the scheme or by the protocol element in
+   which the URI is referenced.  Such a definition should specify the
+   character encoding used to map those characters to octets prior to
+   being percent-encoded for the URI.
+
+<span class="h4"><h4><a name="section-1.2.2">1.2.2</a>.  Separating Identification from Interaction</h4></span>
+
+   A common misunderstanding of URIs is that they are only used to refer
+   to accessible resources.  The URI itself only provides
+   identification; access to the resource is neither guaranteed nor
+   implied by the presence of a URI.  Instead, any operation associated
+   with a URI reference is defined by the protocol element, data format
+   attribute, or natural language text in which it appears.
+
+   Given a URI, a system may attempt to perform a variety of operations
+   on the resource, as might be characterized by words such as "access",
+   "update", "replace", or "find attributes".  Such operations are
+   defined by the protocols that make use of URIs, not by this
+   specification.  However, we do use a few general terms for describing
+   common operations on URIs.  URI "resolution" is the process of
+   determining an access mechanism and the appropriate parameters
+   necessary to dereference a URI; this resolution may require several
+   iterations.  To use that access mechanism to perform an action on the
+   URI's resource is to "dereference" the URI.
+
+   When URIs are used within information retrieval systems to identify
+   sources of information, the most common form of URI dereference is
+   "retrieval": making use of a URI in order to retrieve a
+   representation of its associated resource.  A "representation" is a
+   sequence of octets, along with representation metadata describing
+   those octets, that constitutes a record of the state of the resource
+   at the time when the representation is generated.  Retrieval is
+   achieved by a process that might include using the URI as a cache key
+   to check for a locally cached representation, resolution of the URI
+   to determine an appropriate access mechanism (if any), and
+   dereference of the URI for the sake of applying a retrieval
+   operation.  Depending on the protocols used to perform the retrieval,
+   additional information might be supplied about the resource (resource
+   metadata) and its relation to other resources.
+
+   URI references in information retrieval systems are designed to be
+   late-binding: the result of an access is generally determined when it
+   is accessed and may vary over time or due to other aspects of the
+   interaction.  These references are created in order to be used in the
+   future: what is being identified is not some specific result that was
+   obtained in the past, but rather some characteristic that is expected
+   to be true for future results.  In such cases, the resource referred
+   to by the URI is actually a sameness of characteristics as observed
+
+
+
+<span class="grey">Berners-Lee, et al.         Standards Track                     [Page 9]</span>
+<a name="page-10" id="page-10" href="#page-10"><span class="break"> </span></a>
+<span class="grey"><a href="http://tools.ietf.org/html/rfc3986">RFC 3986</a>                   URI Generic Syntax               January 2005</span>
+
+
+   over time, perhaps elucidated by additional comments or assertions
+   made by the resource provider.
+
+   Although many URI schemes are named after protocols, this does not
+   imply that use of these URIs will result in access to the resource
+   via the named protocol.  URIs are often used simply for the sake of
+   identification.  Even when a URI is used to retrieve a representation
+   of a resource, that access might be through gateways, proxies,
+   caches, and name resolution services that are independent of the
+   protocol associated with the scheme name.  The resolution of some
+   URIs may require the use of more than one protocol (e.g., both DNS
+   and HTTP are typically used to access an "http" URI's origin server
+   when a representation isn't found in a local cache).
+
+<span class="h4"><h4><a name="section-1.2.3">1.2.3</a>.  Hierarchical Identifiers</h4></span>
+
+   The URI syntax is organized hierarchically, with components listed in
+   order of decreasing significance from left to right.  For some URI
+   schemes, the visible hierarchy is limited to the scheme itself:
+   everything after the scheme component delimiter (":") is considered
+   opaque to URI processing.  Other URI schemes make the hierarchy
+   explicit and visible to generic parsing algorithms.
+
+   The generic syntax uses the slash ("/"), question mark ("?"), and
+   number sign ("#") characters to delimit components that are
+   significant to the generic parser's hierarchical interpretation of an
+   identifier.  In addition to aiding the readability of such
+   identifiers through the consistent use of familiar syntax, this
+   uniform representation of hierarchy across naming schemes allows
+   scheme-independent references to be made relative to that hierarchy.
+
+   It is often the case that a group or "tree" of documents has been
+   constructed to serve a common purpose, wherein the vast majority of
+   URI references in these documents point to resources within the tree
+   rather than outside it.  Similarly, documents located at a particular
+   site are much more likely to refer to other resources at that site
+   than to resources at remote sites.  Relative referencing of URIs
+   allows document trees to be partially independent of their location
+   and access scheme.  For instance, it is possible for a single set of
+   hypertext documents to be simultaneously accessible and traversable
+   via each of the "file", "http", and "ftp" schemes if the documents
+   refer to each other with relative references.  Furthermore, such
+   document trees can be moved, as a whole, without changing any of the
+   relative references.
+
+   A relative reference (<a href="#section-4.2">Section 4.2</a>) refers to a resource by describing
+   the difference within a hierarchical name space between the reference
+   context and the target URI.  The reference resolution algorithm,
+
+
+
+<span class="grey">Berners-Lee, et al.         Standards Track                    [Page 10]</span>
+<a name="page-11" id="page-11" href="#page-11"><span class="break"> </span></a>
+<span class="grey"><a href="http://tools.ietf.org/html/rfc3986">RFC 3986</a>                   URI Generic Syntax               January 2005</span>
+
+
+   presented in <a href="#section-5">Section 5</a>, defines how such a reference is transformed
+   to the target URI.  As relative references can only be used within
+   the context of a hierarchical URI, designers of new URI schemes
+   should use a syntax consistent with the generic syntax's hierarchical
+   components unless there are compelling reasons to forbid relative
+   referencing within that scheme.
+
+      NOTE: Previous specifications used the terms "partial URI" and
+      "relative URI" to denote a relative reference to a URI.  As some
+      readers misunderstood those terms to mean that relative URIs are a
+      subset of URIs rather than a method of referencing URIs, this
+      specification simply refers to them as relative references.
+
+   All URI references are parsed by generic syntax parsers when used.
+   However, because hierarchical processing has no effect on an absolute
+   URI used in a reference unless it contains one or more dot-segments
+   (complete path segments of "." or "..", as described in <a href="#section-3.3">Section 3.3</a>),
+   URI scheme specifications can define opaque identifiers by
+   disallowing use of slash characters, question mark characters, and
+   the URIs "scheme:." and "scheme:..".
+
+<span class="h3"><h3><a name="section-1.3">1.3</a>.  Syntax Notation</h3></span>
+
+   This specification uses the Augmented Backus-Naur Form (ABNF)
+   notation of [<a href="http://tools.ietf.org/html/rfc2234" title="&quot;Augmented BNF for Syntax Specifications: ABNF&quot;">RFC2234</a>], including the following core ABNF syntax rules
+   defined by that specification: ALPHA (letters), CR (carriage return),
+   DIGIT (decimal digits), DQUOTE (double quote), HEXDIG (hexadecimal
+   digits), LF (line feed), and SP (space).  The complete URI syntax is
+   collected in Appendix A.
+
+<span class="h2"><h2><a name="section-2">2</a>.  Characters</h2></span>
+
+   The URI syntax provides a method of encoding data, presumably for the
+   sake of identifying a resource, as a sequence of characters.  The URI
+   characters are, in turn, frequently encoded as octets for transport
+   or presentation.  This specification does not mandate any particular
+   character encoding for mapping between URI characters and the octets
+   used to store or transmit those characters.  When a URI appears in a
+   protocol element, the character encoding is defined by that protocol;
+   without such a definition, a URI is assumed to be in the same
+   character encoding as the surrounding text.
+
+   The ABNF notation defines its terminal values to be non-negative
+   integers (codepoints) based on the US-ASCII coded character set
+   [<a href="#ref-ASCII" title="&quot;Coded Character Set -- 7-bit American Standard Code for Information Interchange&quot;">ASCII</a>].  Because a URI is a sequence of characters, we must invert
+   that relation in order to understand the URI syntax.  Therefore, the
+
+
+
+
+
+<span class="grey">Berners-Lee, et al.         Standards Track                    [Page 11]</span>
+<a name="page-12" id="page-12" href="#page-12"><span class="break"> </span></a>
+<span class="grey"><a href="http://tools.ietf.org/html/rfc3986">RFC 3986</a>                   URI Generic Syntax               January 2005</span>
+
+
+   integer values used by the ABNF must be mapped back to their
+   corresponding characters via US-ASCII in order to complete the syntax
+   rules.
+
+   A URI is composed from a limited set of characters consisting of
+   digits, letters, and a few graphic symbols.  A reserved subset of
+   those characters may be used to delimit syntax components within a
+   URI while the remaining characters, including both the unreserved set
+   and those reserved characters not acting as delimiters, define each
+   component's identifying data.
+
+<span class="h3"><h3><a name="section-2.1">2.1</a>.  Percent-Encoding</h3></span>
+
+   A percent-encoding mechanism is used to represent a data octet in a
+   component when that octet's corresponding character is outside the
+   allowed set or is being used as a delimiter of, or within, the
+   component.  A percent-encoded octet is encoded as a character
+   triplet, consisting of the percent character "%" followed by the two
+   hexadecimal digits representing that octet's numeric value.  For
+   example, "%20" is the percent-encoding for the binary octet
+   "00100000" (ABNF: %x20), which in US-ASCII corresponds to the space
+   character (SP).  <a href="#section-2.4">Section 2.4</a> describes when percent-encoding and
+   decoding is applied.
+
+      pct-encoded = "%" HEXDIG HEXDIG
+
+   The uppercase hexadecimal digits 'A' through 'F' are equivalent to
+   the lowercase digits 'a' through 'f', respectively.  If two URIs
+   differ only in the case of hexadecimal digits used in percent-encoded
+   octets, they are equivalent.  For consistency, URI producers and
+   normalizers should use uppercase hexadecimal digits for all percent-
+   encodings.
+
+<span class="h3"><h3><a name="section-2.2">2.2</a>.  Reserved Characters</h3></span>
+
+   URIs include components and subcomponents that are delimited by
+   characters in the "reserved" set.  These characters are called
+   "reserved" because they may (or may not) be defined as delimiters by
+   the generic syntax, by each scheme-specific syntax, or by the
+   implementation-specific syntax of a URI's dereferencing algorithm.
+   If data for a URI component would conflict with a reserved
+   character's purpose as a delimiter, then the conflicting data must be
+   percent-encoded before the URI is formed.
+
+
+
+
+
+
+
+
+<span class="grey">Berners-Lee, et al.         Standards Track                    [Page 12]</span>
+<a name="page-13" id="page-13" href="#page-13"><span class="break"> </span></a>
+<span class="grey"><a href="http://tools.ietf.org/html/rfc3986">RFC 3986</a>                   URI Generic Syntax               January 2005</span>
+
+
+      reserved    = gen-delims / sub-delims
+
+      gen-delims  = ":" / "/" / "?" / "#" / "[" / "]" / "@"
+
+      sub-delims  = "!" / "$" / "&amp;" / "'" / "(" / ")"
+                  / "*" / "+" / "," / ";" / "="
+
+   The purpose of reserved characters is to provide a set of delimiting
+   characters that are distinguishable from other data within a URI.
+   URIs that differ in the replacement of a reserved character with its
+   corresponding percent-encoded octet are not equivalent.  Percent-
+   encoding a reserved character, or decoding a percent-encoded octet
+   that corresponds to a reserved character, will change how the URI is
+   interpreted by most applications.  Thus, characters in the reserved
+   set are protected from normalization and are therefore safe to be
+   used by scheme-specific and producer-specific algorithms for
+   delimiting data subcomponents within a URI.
+
+   A subset of the reserved characters (gen-delims) is used as
+   delimiters of the generic URI components described in <a href="#section-3">Section 3</a>.  A
+   component's ABNF syntax rule will not use the reserved or gen-delims
+   rule names directly; instead, each syntax rule lists the characters
+   allowed within that component (i.e., not delimiting it), and any of
+   those characters that are also in the reserved set are "reserved" for
+   use as subcomponent delimiters within the component.  Only the most
+   common subcomponents are defined by this specification; other
+   subcomponents may be defined by a URI scheme's specification, or by
+   the implementation-specific syntax of a URI's dereferencing
+   algorithm, provided that such subcomponents are delimited by
+   characters in the reserved set allowed within that component.
+
+   URI producing applications should percent-encode data octets that
+   correspond to characters in the reserved set unless these characters
+   are specifically allowed by the URI scheme to represent data in that
+   component.  If a reserved character is found in a URI component and
+   no delimiting role is known for that character, then it must be
+   interpreted as representing the data octet corresponding to that
+   character's encoding in US-ASCII.
+
+<span class="h3"><h3><a name="section-2.3">2.3</a>.  Unreserved Characters</h3></span>
+
+   Characters that are allowed in a URI but do not have a reserved
+   purpose are called unreserved.  These include uppercase and lowercase
+   letters, decimal digits, hyphen, period, underscore, and tilde.
+
+      unreserved  = ALPHA / DIGIT / "-" / "." / "_" / "~"
+
+
+
+
+
+<span class="grey">Berners-Lee, et al.         Standards Track                    [Page 13]</span>
+<a name="page-14" id="page-14" href="#page-14"><span class="break"> </span></a>
+<span class="grey"><a href="http://tools.ietf.org/html/rfc3986">RFC 3986</a>                   URI Generic Syntax               January 2005</span>
+
+
+   URIs that differ in the replacement of an unreserved character with
+   its corresponding percent-encoded US-ASCII octet are equivalent: they
+   identify the same resource.  However, URI comparison implementations
+   do not always perform normalization prior to comparison (see Section
+   6).  For consistency, percent-encoded octets in the ranges of ALPHA
+   (%41-%5A and %61-%7A), DIGIT (%30-%39), hyphen (%2D), period (%2E),
+   underscore (%5F), or tilde (%7E) should not be created by URI
+   producers and, when found in a URI, should be decoded to their
+   corresponding unreserved characters by URI normalizers.
+
+<span class="h3"><h3><a name="section-2.4">2.4</a>.  When to Encode or Decode</h3></span>
+
+   Under normal circumstances, the only time when octets within a URI
+   are percent-encoded is during the process of producing the URI from
+   its component parts.  This is when an implementation determines which
+   of the reserved characters are to be used as subcomponent delimiters
+   and which can be safely used as data.  Once produced, a URI is always
+   in its percent-encoded form.
+
+   When a URI is dereferenced, the components and subcomponents
+   significant to the scheme-specific dereferencing process (if any)
+   must be parsed and separated before the percent-encoded octets within
+   those components can be safely decoded, as otherwise the data may be
+   mistaken for component delimiters.  The only exception is for
+   percent-encoded octets corresponding to characters in the unreserved
+   set, which can be decoded at any time.  For example, the octet
+   corresponding to the tilde ("~") character is often encoded as "%7E"
+   by older URI processing implementations; the "%7E" can be replaced by
+   "~" without changing its interpretation.
+
+   Because the percent ("%") character serves as the indicator for
+   percent-encoded octets, it must be percent-encoded as "%25" for that
+   octet to be used as data within a URI.  Implementations must not
+   percent-encode or decode the same string more than once, as decoding
+   an already decoded string might lead to misinterpreting a percent
+   data octet as the beginning of a percent-encoding, or vice versa in
+   the case of percent-encoding an already percent-encoded string.
+
+<span class="h3"><h3><a name="section-2.5">2.5</a>.  Identifying Data</h3></span>
+
+   URI characters provide identifying data for each of the URI
+   components, serving as an external interface for identification
+   between systems.  Although the presence and nature of the URI
+   production interface is hidden from clients that use its URIs (and is
+   thus beyond the scope of the interoperability requirements defined by
+   this specification), it is a frequent source of confusion and errors
+   in the interpretation of URI character issues.  Implementers have to
+   be aware that there are multiple character encodings involved in the
+
+
+
+<span class="grey">Berners-Lee, et al.         Standards Track                    [Page 14]</span>
+<a name="page-15" id="page-15" href="#page-15"><span class="break"> </span></a>
+<span class="grey"><a href="http://tools.ietf.org/html/rfc3986">RFC 3986</a>                   URI Generic Syntax               January 2005</span>
+
+
+   production and transmission of URIs: local name and data encoding,
+   public interface encoding, URI character encoding, data format
+   encoding, and protocol encoding.
+
+   Local names, such as file system names, are stored with a local
+   character encoding.  URI producing applications (e.g., origin
+   servers) will typically use the local encoding as the basis for
+   producing meaningful names.  The URI producer will transform the
+   local encoding to one that is suitable for a public interface and
+   then transform the public interface encoding into the restricted set
+   of URI characters (reserved, unreserved, and percent-encodings).
+   Those characters are, in turn, encoded as octets to be used as a
+   reference within a data format (e.g., a document charset), and such
+   data formats are often subsequently encoded for transmission over
+   Internet protocols.
+
+   For most systems, an unreserved character appearing within a URI
+   component is interpreted as representing the data octet corresponding
+   to that character's encoding in US-ASCII.  Consumers of URIs assume
+   that the letter "X" corresponds to the octet "01011000", and even
+   when that assumption is incorrect, there is no harm in making it.  A
+   system that internally provides identifiers in the form of a
+   different character encoding, such as EBCDIC, will generally perform
+   character translation of textual identifiers to UTF-8 [<a href="#ref-STD63" title="&quot;UTF-8, a transformation format of ISO 10646&quot;">STD63</a>] (or
+   some other superset of the US-ASCII character encoding) at an
+   internal interface, thereby providing more meaningful identifiers
+   than those resulting from simply percent-encoding the original
+   octets.
+
+   For example, consider an information service that provides data,
+   stored locally using an EBCDIC-based file system, to clients on the
+   Internet through an HTTP server.  When an author creates a file with
+   the name "Laguna Beach" on that file system, the "http" URI
+   corresponding to that resource is expected to contain the meaningful
+   string "Laguna%20Beach".  If, however, that server produces URIs by
+   using an overly simplistic raw octet mapping, then the result would
+   be a URI containing "%D3%81%87%A4%95%81@%C2%85%81%83%88".  An
+   internal transcoding interface fixes this problem by transcoding the
+   local name to a superset of US-ASCII prior to producing the URI.
+   Naturally, proper interpretation of an incoming URI on such an
+   interface requires that percent-encoded octets be decoded (e.g.,
+   "%20" to SP) before the reverse transcoding is applied to obtain the
+   local name.
+
+   In some cases, the internal interface between a URI component and the
+   identifying data that it has been crafted to represent is much less
+   direct than a character encoding translation.  For example, portions
+   of a URI might reflect a query on non-ASCII data, or numeric
+
+
+
+<span class="grey">Berners-Lee, et al.         Standards Track                    [Page 15]</span>
+<a name="page-16" id="page-16" href="#page-16"><span class="break"> </span></a>
+<span class="grey"><a href="http://tools.ietf.org/html/rfc3986">RFC 3986</a>                   URI Generic Syntax               January 2005</span>
+
+
+   coordinates on a map.  Likewise, a URI scheme may define components
+   with additional encoding requirements that are applied prior to
+   forming the component and producing the URI.
+
+   When a new URI scheme defines a component that represents textual
+   data consisting of characters from the Universal Character Set [<a href="#ref-UCS" title="&quot;Information Technology - Universal Multiple-Octet Coded Character Set (UCS)&quot;">UCS</a>],
+   the data should first be encoded as octets according to the UTF-8
+   character encoding [<a href="#ref-STD63" title="&quot;UTF-8, a transformation format of ISO 10646&quot;">STD63</a>]; then only those octets that do not
+   correspond to characters in the unreserved set should be percent-
+   encoded.  For example, the character A would be represented as "A",
+   the character LATIN CAPITAL LETTER A WITH GRAVE would be represented
+   as "%C3%80", and the character KATAKANA LETTER A would be represented
+   as "%E3%82%A2".
+
+<span class="h2"><h2><a name="section-3">3</a>.  Syntax Components</h2></span>
+
+   The generic URI syntax consists of a hierarchical sequence of
+   components referred to as the scheme, authority, path, query, and
+   fragment.
+
+      URI         = scheme ":" hier-part [ "?" query ] [ "#" fragment ]
+
+      hier-part   = "//" authority path-abempty
+                  / path-absolute
+                  / path-rootless
+                  / path-empty
+
+   The scheme and path components are required, though the path may be
+   empty (no characters).  When authority is present, the path must
+   either be empty or begin with a slash ("/") character.  When
+   authority is not present, the path cannot begin with two slash
+   characters ("//").  These restrictions result in five different ABNF
+   rules for a path (<a href="#section-3.3">Section 3.3</a>), only one of which will match any
+   given URI reference.
+
+   The following are two example URIs and their component parts:
+
+         foo://example.com:8042/over/there?name=ferret#nose
+         \_/   \______________/\_________/ \_________/ \__/
+          |           |            |            |        |
+       scheme     authority       path        query   fragment
+          |   _____________________|__
+         / \ /                        \
+         urn:example:animal:ferret:nose
+
+
+
+
+
+
+
+<span class="grey">Berners-Lee, et al.         Standards Track                    [Page 16]</span>
+<a name="page-17" id="page-17" href="#page-17"><span class="break"> </span></a>
+<span class="grey"><a href="http://tools.ietf.org/html/rfc3986">RFC 3986</a>                   URI Generic Syntax               January 2005</span>
+
+
+<span class="h3"><h3><a name="section-3.1">3.1</a>.  Scheme</h3></span>
+
+   Each URI begins with a scheme name that refers to a specification for
+   assigning identifiers within that scheme.  As such, the URI syntax is
+   a federated and extensible naming system wherein each scheme's
+   specification may further restrict the syntax and semantics of
+   identifiers using that scheme.
+
+   Scheme names consist of a sequence of characters beginning with a
+   letter and followed by any combination of letters, digits, plus
+   ("+"), period ("."), or hyphen ("-").  Although schemes are case-
+   insensitive, the canonical form is lowercase and documents that
+   specify schemes must do so with lowercase letters.  An implementation
+   should accept uppercase letters as equivalent to lowercase in scheme
+   names (e.g., allow "HTTP" as well as "http") for the sake of
+   robustness but should only produce lowercase scheme names for
+   consistency.
+
+      scheme      = ALPHA *( ALPHA / DIGIT / "+" / "-" / "." )
+
+   Individual schemes are not specified by this document.  The process
+   for registration of new URI schemes is defined separately by [<a href="#ref-BCP35" title="&quot;Registration Procedures for URL Scheme Names&quot;">BCP35</a>].
+   The scheme registry maintains the mapping between scheme names and
+   their specifications.  Advice for designers of new URI schemes can be
+   found in [<a href="http://tools.ietf.org/html/rfc2718" title="&quot;Guidelines for new URL Schemes&quot;">RFC2718</a>].  URI scheme specifications must define their own
+   syntax so that all strings matching their scheme-specific syntax will
+   also match the &lt;absolute-URI&gt; grammar, as described in <a href="#section-4.3">Section 4.3</a>.
+
+   When presented with a URI that violates one or more scheme-specific
+   restrictions, the scheme-specific resolution process should flag the
+   reference as an error rather than ignore the unused parts; doing so
+   reduces the number of equivalent URIs and helps detect abuses of the
+   generic syntax, which might indicate that the URI has been
+   constructed to mislead the user (<a href="#section-7.6">Section 7.6</a>).
+
+<span class="h3"><h3><a name="section-3.2">3.2</a>.  Authority</h3></span>
+
+   Many URI schemes include a hierarchical element for a naming
+   authority so that governance of the name space defined by the
+   remainder of the URI is delegated to that authority (which may, in
+   turn, delegate it further).  The generic syntax provides a common
+   means for distinguishing an authority based on a registered name or
+   server address, along with optional port and user information.
+
+   The authority component is preceded by a double slash ("//") and is
+   terminated by the next slash ("/"), question mark ("?"), or number
+   sign ("#") character, or by the end of the URI.
+
+
+
+
+<span class="grey">Berners-Lee, et al.         Standards Track                    [Page 17]</span>
+<a name="page-18" id="page-18" href="#page-18"><span class="break"> </span></a>
+<span class="grey"><a href="http://tools.ietf.org/html/rfc3986">RFC 3986</a>                   URI Generic Syntax               January 2005</span>
+
+
+      authority   = [ userinfo "@" ] host [ ":" port ]
+
+   URI producers and normalizers should omit the ":" delimiter that
+   separates host from port if the port component is empty.  Some
+   schemes do not allow the userinfo and/or port subcomponents.
+
+   If a URI contains an authority component, then the path component
+   must either be empty or begin with a slash ("/") character.  Non-
+   validating parsers (those that merely separate a URI reference into
+   its major components) will often ignore the subcomponent structure of
+   authority, treating it as an opaque string from the double-slash to
+   the first terminating delimiter, until such time as the URI is
+   dereferenced.
+
+<span class="h4"><h4><a name="section-3.2.1">3.2.1</a>.  User Information</h4></span>
+
+   The userinfo subcomponent may consist of a user name and, optionally,
+   scheme-specific information about how to gain authorization to access
+   the resource.  The user information, if present, is followed by a
+   commercial at-sign ("@") that delimits it from the host.
+
+      userinfo    = *( unreserved / pct-encoded / sub-delims / ":" )
+
+   Use of the format "user:password" in the userinfo field is
+   deprecated.  Applications should not render as clear text any data
+   after the first colon (":") character found within a userinfo
+   subcomponent unless the data after the colon is the empty string
+   (indicating no password).  Applications may choose to ignore or
+   reject such data when it is received as part of a reference and
+   should reject the storage of such data in unencrypted form.  The
+   passing of authentication information in clear text has proven to be
+   a security risk in almost every case where it has been used.
+
+   Applications that render a URI for the sake of user feedback, such as
+   in graphical hypertext browsing, should render userinfo in a way that
+   is distinguished from the rest of a URI, when feasible.  Such
+   rendering will assist the user in cases where the userinfo has been
+   misleadingly crafted to look like a trusted domain name
+   (<a href="#section-7.6">Section 7.6</a>).
+
+<span class="h4"><h4><a name="section-3.2.2">3.2.2</a>.  Host</h4></span>
+
+   The host subcomponent of authority is identified by an IP literal
+   encapsulated within square brackets, an IPv4 address in dotted-
+   decimal form, or a registered name.  The host subcomponent is case-
+   insensitive.  The presence of a host subcomponent within a URI does
+   not imply that the scheme requires access to the given host on the
+   Internet.  In many cases, the host syntax is used only for the sake
+
+
+
+<span class="grey">Berners-Lee, et al.         Standards Track                    [Page 18]</span>
+<a name="page-19" id="page-19" href="#page-19"><span class="break"> </span></a>
+<span class="grey"><a href="http://tools.ietf.org/html/rfc3986">RFC 3986</a>                   URI Generic Syntax               January 2005</span>
+
+
+   of reusing the existing registration process created and deployed for
+   DNS, thus obtaining a globally unique name without the cost of
+   deploying another registry.  However, such use comes with its own
+   costs: domain name ownership may change over time for reasons not
+   anticipated by the URI producer.  In other cases, the data within the
+   host component identifies a registered name that has nothing to do
+   with an Internet host.  We use the name "host" for the ABNF rule
+   because that is its most common purpose, not its only purpose.
+
+      host        = IP-literal / IPv4address / reg-name
+
+   The syntax rule for host is ambiguous because it does not completely
+   distinguish between an IPv4address and a reg-name.  In order to
+   disambiguate the syntax, we apply the "first-match-wins" algorithm:
+   If host matches the rule for IPv4address, then it should be
+   considered an IPv4 address literal and not a reg-name.  Although host
+   is case-insensitive, producers and normalizers should use lowercase
+   for registered names and hexadecimal addresses for the sake of
+   uniformity, while only using uppercase letters for percent-encodings.
+
+   A host identified by an Internet Protocol literal address, version 6
+   [<a href="http://tools.ietf.org/html/rfc3513" title="&quot;Internet Protocol Version 6 (IPv6) Addressing Architecture&quot;">RFC3513</a>] or later, is distinguished by enclosing the IP literal
+   within square brackets ("[" and "]").  This is the only place where
+   square bracket characters are allowed in the URI syntax.  In
+   anticipation of future, as-yet-undefined IP literal address formats,
+   an implementation may use an optional version flag to indicate such a
+   format explicitly rather than rely on heuristic determination.
+
+      IP-literal = "[" ( IPv6address / IPvFuture  ) "]"
+
+      IPvFuture  = "v" 1*HEXDIG "." 1*( unreserved / sub-delims / ":" )
+
+   The version flag does not indicate the IP version; rather, it
+   indicates future versions of the literal format.  As such,
+   implementations must not provide the version flag for the existing
+   IPv4 and IPv6 literal address forms described below.  If a URI
+   containing an IP-literal that starts with "v" (case-insensitive),
+   indicating that the version flag is present, is dereferenced by an
+   application that does not know the meaning of that version flag, then
+   the application should return an appropriate error for "address
+   mechanism not supported".
+
+   A host identified by an IPv6 literal address is represented inside
+   the square brackets without a preceding version flag.  The ABNF
+   provided here is a translation of the text definition of an IPv6
+   literal address provided in [<a href="http://tools.ietf.org/html/rfc3513" title="&quot;Internet Protocol Version 6 (IPv6) Addressing Architecture&quot;">RFC3513</a>].  This syntax does not support
+   IPv6 scoped addressing zone identifiers.
+
+
+
+
+<span class="grey">Berners-Lee, et al.         Standards Track                    [Page 19]</span>
+<a name="page-20" id="page-20" href="#page-20"><span class="break"> </span></a>
+<span class="grey"><a href="http://tools.ietf.org/html/rfc3986">RFC 3986</a>                   URI Generic Syntax               January 2005</span>
+
+
+   A 128-bit IPv6 address is divided into eight 16-bit pieces.  Each
+   piece is represented numerically in case-insensitive hexadecimal,
+   using one to four hexadecimal digits (leading zeroes are permitted).
+   The eight encoded pieces are given most-significant first, separated
+   by colon characters.  Optionally, the least-significant two pieces
+   may instead be represented in IPv4 address textual format.  A
+   sequence of one or more consecutive zero-valued 16-bit pieces within
+   the address may be elided, omitting all their digits and leaving
+   exactly two consecutive colons in their place to mark the elision.
+
+      IPv6address =                            6( h16 ":" ) ls32
+                  /                       "::" 5( h16 ":" ) ls32
+                  / [               h16 ] "::" 4( h16 ":" ) ls32
+                  / [ *1( h16 ":" ) h16 ] "::" 3( h16 ":" ) ls32
+                  / [ *2( h16 ":" ) h16 ] "::" 2( h16 ":" ) ls32
+                  / [ *3( h16 ":" ) h16 ] "::"    h16 ":"   ls32
+                  / [ *4( h16 ":" ) h16 ] "::"              ls32
+                  / [ *5( h16 ":" ) h16 ] "::"              h16
+                  / [ *6( h16 ":" ) h16 ] "::"
+
+      ls32        = ( h16 ":" h16 ) / IPv4address
+                  ; least-significant 32 bits of address
+
+      h16         = 1*4HEXDIG
+                  ; 16 bits of address represented in hexadecimal
+
+   A host identified by an IPv4 literal address is represented in
+   dotted-decimal notation (a sequence of four decimal numbers in the
+   range 0 to 255, separated by "."), as described in [<a href="http://tools.ietf.org/html/rfc1123" title="&quot;Requirements for Internet Hosts - Application and Support&quot;">RFC1123</a>] by
+   reference to [<a href="http://tools.ietf.org/html/rfc0952" title="&quot;DoD Internet host table specification&quot;">RFC0952</a>].  Note that other forms of dotted notation may
+   be interpreted on some platforms, as described in <a href="#section-7.4">Section 7.4</a>, but
+   only the dotted-decimal form of four octets is allowed by this
+   grammar.
+
+      IPv4address = dec-octet "." dec-octet "." dec-octet "." dec-octet
+
+      dec-octet   = DIGIT                 ; 0-9
+                  / %x31-39 DIGIT         ; 10-99
+                  / "1" 2DIGIT            ; 100-199
+                  / "2" %x30-34 DIGIT     ; 200-249
+                  / "25" %x30-35          ; 250-255
+
+   A host identified by a registered name is a sequence of characters
+   usually intended for lookup within a locally defined host or service
+   name registry, though the URI's scheme-specific semantics may require
+   that a specific registry (or fixed name table) be used instead.  The
+   most common name registry mechanism is the Domain Name System (DNS).
+   A registered name intended for lookup in the DNS uses the syntax
+
+
+
+<span class="grey">Berners-Lee, et al.         Standards Track                    [Page 20]</span>
+<a name="page-21" id="page-21" href="#page-21"><span class="break"> </span></a>
+<span class="grey"><a href="http://tools.ietf.org/html/rfc3986">RFC 3986</a>                   URI Generic Syntax               January 2005</span>
+
+
+   defined in <a href="#section-3.5">Section 3.5</a> of [<a href="http://tools.ietf.org/html/rfc1034" title="&quot;Domain names - concepts and facilities&quot;">RFC1034</a>] and <a href="#section-2.1">Section 2.1</a> of [<a href="http://tools.ietf.org/html/rfc1123" title="&quot;Requirements for Internet Hosts - Application and Support&quot;">RFC1123</a>].
+   Such a name consists of a sequence of domain labels separated by ".",
+   each domain label starting and ending with an alphanumeric character
+   and possibly also containing "-" characters.  The rightmost domain
+   label of a fully qualified domain name in DNS may be followed by a
+   single "." and should be if it is necessary to distinguish between
+   the complete domain name and some local domain.
+
+      reg-name    = *( unreserved / pct-encoded / sub-delims )
+
+   If the URI scheme defines a default for host, then that default
+   applies when the host subcomponent is undefined or when the
+   registered name is empty (zero length).  For example, the "file" URI
+   scheme is defined so that no authority, an empty host, and
+   "localhost" all mean the end-user's machine, whereas the "http"
+   scheme considers a missing authority or empty host invalid.
+
+   This specification does not mandate a particular registered name
+   lookup technology and therefore does not restrict the syntax of reg-
+   name beyond what is necessary for interoperability.  Instead, it
+   delegates the issue of registered name syntax conformance to the
+   operating system of each application performing URI resolution, and
+   that operating system decides what it will allow for the purpose of
+   host identification.  A URI resolution implementation might use DNS,
+   host tables, yellow pages, NetInfo, WINS, or any other system for
+   lookup of registered names.  However, a globally scoped naming
+   system, such as DNS fully qualified domain names, is necessary for
+   URIs intended to have global scope.  URI producers should use names
+   that conform to the DNS syntax, even when use of DNS is not
+   immediately apparent, and should limit these names to no more than
+   255 characters in length.
+
+   The reg-name syntax allows percent-encoded octets in order to
+   represent non-ASCII registered names in a uniform way that is
+   independent of the underlying name resolution technology.  Non-ASCII
+   characters must first be encoded according to UTF-8 [<a href="#ref-STD63" title="&quot;UTF-8, a transformation format of ISO 10646&quot;">STD63</a>], and then
+   each octet of the corresponding UTF-8 sequence must be percent-
+   encoded to be represented as URI characters.  URI producing
+   applications must not use percent-encoding in host unless it is used
+   to represent a UTF-8 character sequence.  When a non-ASCII registered
+   name represents an internationalized domain name intended for
+   resolution via the DNS, the name must be transformed to the IDNA
+   encoding [<a href="http://tools.ietf.org/html/rfc3490" title="&quot;Internationalizing Domain Names in Applications (IDNA)&quot;">RFC3490</a>] prior to name lookup.  URI producers should
+   provide these registered names in the IDNA encoding, rather than a
+   percent-encoding, if they wish to maximize interoperability with
+   legacy URI resolvers.
+
+
+
+
+
+<span class="grey">Berners-Lee, et al.         Standards Track                    [Page 21]</span>
+<a name="page-22" id="page-22" href="#page-22"><span class="break"> </span></a>
+<span class="grey"><a href="http://tools.ietf.org/html/rfc3986">RFC 3986</a>                   URI Generic Syntax               January 2005</span>
+
+
+<span class="h4"><h4><a name="section-3.2.3">3.2.3</a>.  Port</h4></span>
+
+   The port subcomponent of authority is designated by an optional port
+   number in decimal following the host and delimited from it by a
+   single colon (":") character.
+
+      port        = *DIGIT
+
+   A scheme may define a default port.  For example, the "http" scheme
+   defines a default port of "80", corresponding to its reserved TCP
+   port number.  The type of port designated by the port number (e.g.,
+   TCP, UDP, SCTP) is defined by the URI scheme.  URI producers and
+   normalizers should omit the port component and its ":" delimiter if
+   port is empty or if its value would be the same as that of the
+   scheme's default.
+
+<span class="h3"><h3><a name="section-3.3">3.3</a>.  Path</h3></span>
+
+   The path component contains data, usually organized in hierarchical
+   form, that, along with data in the non-hierarchical query component
+   (<a href="#section-3.4">Section 3.4</a>), serves to identify a resource within the scope of the
+   URI's scheme and naming authority (if any).  The path is terminated
+   by the first question mark ("?") or number sign ("#") character, or
+   by the end of the URI.
+
+   If a URI contains an authority component, then the path component
+   must either be empty or begin with a slash ("/") character.  If a URI
+   does not contain an authority component, then the path cannot begin
+   with two slash characters ("//").  In addition, a URI reference
+   (<a href="#section-4.1">Section 4.1</a>) may be a relative-path reference, in which case the
+   first path segment cannot contain a colon (":") character.  The ABNF
+   requires five separate rules to disambiguate these cases, only one of
+   which will match the path substring within a given URI reference.  We
+   use the generic term "path component" to describe the URI substring
+   matched by the parser to one of these rules.
+
+      path          = path-abempty    ; begins with "/" or is empty
+                    / path-absolute   ; begins with "/" but not "//"
+                    / path-noscheme   ; begins with a non-colon segment
+                    / path-rootless   ; begins with a segment
+                    / path-empty      ; zero characters
+
+      path-abempty  = *( "/" segment )
+      path-absolute = "/" [ segment-nz *( "/" segment ) ]
+      path-noscheme = segment-nz-nc *( "/" segment )
+      path-rootless = segment-nz *( "/" segment )
+      path-empty    = 0&lt;pchar&gt;
+
+
+
+
+<span class="grey">Berners-Lee, et al.         Standards Track                    [Page 22]</span>
+<a name="page-23" id="page-23" href="#page-23"><span class="break"> </span></a>
+<span class="grey"><a href="http://tools.ietf.org/html/rfc3986">RFC 3986</a>                   URI Generic Syntax               January 2005</span>
+
+
+      segment       = *pchar
+      segment-nz    = 1*pchar
+      segment-nz-nc = 1*( unreserved / pct-encoded / sub-delims / "@" )
+                    ; non-zero-length segment without any colon ":"
+
+      pchar         = unreserved / pct-encoded / sub-delims / ":" / "@"
+
+   A path consists of a sequence of path segments separated by a slash
+   ("/") character.  A path is always defined for a URI, though the
+   defined path may be empty (zero length).  Use of the slash character
+   to indicate hierarchy is only required when a URI will be used as the
+   context for relative references.  For example, the URI
+   &lt;mailto:fred@example.com&gt; has a path of "fred@example.com", whereas
+   the URI &lt;foo://info.example.com?fred&gt; has an empty path.
+
+   The path segments "." and "..", also known as dot-segments, are
+   defined for relative reference within the path name hierarchy.  They
+   are intended for use at the beginning of a relative-path reference
+   (<a href="#section-4.2">Section 4.2</a>) to indicate relative position within the hierarchical
+   tree of names.  This is similar to their role within some operating
+   systems' file directory structures to indicate the current directory
+   and parent directory, respectively.  However, unlike in a file
+   system, these dot-segments are only interpreted within the URI path
+   hierarchy and are removed as part of the resolution process (Section
+   5.2).
+
+   Aside from dot-segments in hierarchical paths, a path segment is
+   considered opaque by the generic syntax.  URI producing applications
+   often use the reserved characters allowed in a segment to delimit
+   scheme-specific or dereference-handler-specific subcomponents.  For
+   example, the semicolon (";") and equals ("=") reserved characters are
+   often used to delimit parameters and parameter values applicable to
+   that segment.  The comma (",") reserved character is often used for
+   similar purposes.  For example, one URI producer might use a segment
+   such as "name;v=1.1" to indicate a reference to version 1.1 of
+   "name", whereas another might use a segment such as "name,1.1" to
+   indicate the same.  Parameter types may be defined by scheme-specific
+   semantics, but in most cases the syntax of a parameter is specific to
+   the implementation of the URI's dereferencing algorithm.
+
+<span class="h3"><h3><a name="section-3.4">3.4</a>.  Query</h3></span>
+
+   The query component contains non-hierarchical data that, along with
+   data in the path component (<a href="#section-3.3">Section 3.3</a>), serves to identify a
+   resource within the scope of the URI's scheme and naming authority
+   (if any).  The query component is indicated by the first question
+   mark ("?") character and terminated by a number sign ("#") character
+   or by the end of the URI.
+
+
+
+<span class="grey">Berners-Lee, et al.         Standards Track                    [Page 23]</span>
+<a name="page-24" id="page-24" href="#page-24"><span class="break"> </span></a>
+<span class="grey"><a href="http://tools.ietf.org/html/rfc3986">RFC 3986</a>                   URI Generic Syntax               January 2005</span>
+
+
+      query       = *( pchar / "/" / "?" )
+
+   The characters slash ("/") and question mark ("?") may represent data
+   within the query component.  Beware that some older, erroneous
+   implementations may not handle such data correctly when it is used as
+   the base URI for relative references (<a href="#section-5.1">Section 5.1</a>), apparently
+   because they fail to distinguish query data from path data when
+   looking for hierarchical separators.  However, as query components
+   are often used to carry identifying information in the form of
+   "key=value" pairs and one frequently used value is a reference to
+   another URI, it is sometimes better for usability to avoid percent-
+   encoding those characters.
+
+<span class="h3"><h3><a name="section-3.5">3.5</a>.  Fragment</h3></span>
+
+   The fragment identifier component of a URI allows indirect
+   identification of a secondary resource by reference to a primary
+   resource and additional identifying information.  The identified
+   secondary resource may be some portion or subset of the primary
+   resource, some view on representations of the primary resource, or
+   some other resource defined or described by those representations.  A
+   fragment identifier component is indicated by the presence of a
+   number sign ("#") character and terminated by the end of the URI.
+
+      fragment    = *( pchar / "/" / "?" )
+
+   The semantics of a fragment identifier are defined by the set of
+   representations that might result from a retrieval action on the
+   primary resource.  The fragment's format and resolution is therefore
+   dependent on the media type [<a href="http://tools.ietf.org/html/rfc2046" title="&quot;Multipurpose Internet Mail Extensions (MIME) Part Two: Media Types&quot;">RFC2046</a>] of a potentially retrieved
+   representation, even though such a retrieval is only performed if the
+   URI is dereferenced.  If no such representation exists, then the
+   semantics of the fragment are considered unknown and are effectively
+   unconstrained.  Fragment identifier semantics are independent of the
+   URI scheme and thus cannot be redefined by scheme specifications.
+
+   Individual media types may define their own restrictions on or
+   structures within the fragment identifier syntax for specifying
+   different types of subsets, views, or external references that are
+   identifiable as secondary resources by that media type.  If the
+   primary resource has multiple representations, as is often the case
+   for resources whose representation is selected based on attributes of
+   the retrieval request (a.k.a., content negotiation), then whatever is
+   identified by the fragment should be consistent across all of those
+   representations.  Each representation should either define the
+   fragment so that it corresponds to the same secondary resource,
+   regardless of how it is represented, or should leave the fragment
+   undefined (i.e., not found).
+
+
+
+<span class="grey">Berners-Lee, et al.         Standards Track                    [Page 24]</span>
+<a name="page-25" id="page-25" href="#page-25"><span class="break"> </span></a>
+<span class="grey"><a href="http://tools.ietf.org/html/rfc3986">RFC 3986</a>                   URI Generic Syntax               January 2005</span>
+
+
+   As with any URI, use of a fragment identifier component does not
+   imply that a retrieval action will take place.  A URI with a fragment
+   identifier may be used to refer to the secondary resource without any
+   implication that the primary resource is accessible or will ever be
+   accessed.
+
+   Fragment identifiers have a special role in information retrieval
+   systems as the primary form of client-side indirect referencing,
+   allowing an author to specifically identify aspects of an existing
+   resource that are only indirectly provided by the resource owner.  As
+   such, the fragment identifier is not used in the scheme-specific
+   processing of a URI; instead, the fragment identifier is separated
+   from the rest of the URI prior to a dereference, and thus the
+   identifying information within the fragment itself is dereferenced
+   solely by the user agent, regardless of the URI scheme.  Although
+   this separate handling is often perceived to be a loss of
+   information, particularly for accurate redirection of references as
+   resources move over time, it also serves to prevent information
+   providers from denying reference authors the right to refer to
+   information within a resource selectively.  Indirect referencing also
+   provides additional flexibility and extensibility to systems that use
+   URIs, as new media types are easier to define and deploy than new
+   schemes of identification.
+
+   The characters slash ("/") and question mark ("?") are allowed to
+   represent data within the fragment identifier.  Beware that some
+   older, erroneous implementations may not handle this data correctly
+   when it is used as the base URI for relative references (Section
+   5.1).
+
+<span class="h2"><h2><a name="section-4">4</a>.  Usage</h2></span>
+
+   When applications make reference to a URI, they do not always use the
+   full form of reference defined by the "URI" syntax rule.  To save
+   space and take advantage of hierarchical locality, many Internet
+   protocol elements and media type formats allow an abbreviation of a
+   URI, whereas others restrict the syntax to a particular form of URI.
+   We define the most common forms of reference syntax in this
+   specification because they impact and depend upon the design of the
+   generic syntax, requiring a uniform parsing algorithm in order to be
+   interpreted consistently.
+
+<span class="h3"><h3><a name="section-4.1">4.1</a>.  URI Reference</h3></span>
+
+   URI-reference is used to denote the most common usage of a resource
+   identifier.
+
+      URI-reference = URI / relative-ref
+
+
+
+<span class="grey">Berners-Lee, et al.         Standards Track                    [Page 25]</span>
+<a name="page-26" id="page-26" href="#page-26"><span class="break"> </span></a>
+<span class="grey"><a href="http://tools.ietf.org/html/rfc3986">RFC 3986</a>                   URI Generic Syntax               January 2005</span>
+
+
+   A URI-reference is either a URI or a relative reference.  If the
+   URI-reference's prefix does not match the syntax of a scheme followed
+   by its colon separator, then the URI-reference is a relative
+   reference.
+
+   A URI-reference is typically parsed first into the five URI
+   components, in order to determine what components are present and
+   whether the reference is relative.  Then, each component is parsed
+   for its subparts and their validation.  The ABNF of URI-reference,
+   along with the "first-match-wins" disambiguation rule, is sufficient
+   to define a validating parser for the generic syntax.  Readers
+   familiar with regular expressions should see Appendix B for an
+   example of a non-validating URI-reference parser that will take any
+   given string and extract the URI components.
+
+<span class="h3"><h3><a name="section-4.2">4.2</a>.  Relative Reference</h3></span>
+
+   A relative reference takes advantage of the hierarchical syntax
+   (<a href="#section-1.2.3">Section 1.2.3</a>) to express a URI reference relative to the name space
+   of another hierarchical URI.
+
+      relative-ref  = relative-part [ "?" query ] [ "#" fragment ]
+
+      relative-part = "//" authority path-abempty
+                    / path-absolute
+                    / path-noscheme
+                    / path-empty
+
+   The URI referred to by a relative reference, also known as the target
+   URI, is obtained by applying the reference resolution algorithm of
+   <a href="#section-5">Section 5</a>.
+
+   A relative reference that begins with two slash characters is termed
+   a network-path reference; such references are rarely used.  A
+   relative reference that begins with a single slash character is
+   termed an absolute-path reference.  A relative reference that does
+   not begin with a slash character is termed a relative-path reference.
+
+   A path segment that contains a colon character (e.g., "this:that")
+   cannot be used as the first segment of a relative-path reference, as
+   it would be mistaken for a scheme name.  Such a segment must be
+   preceded by a dot-segment (e.g., "./this:that") to make a relative-
+   path reference.
+
+
+
+
+
+
+
+
+<span class="grey">Berners-Lee, et al.         Standards Track                    [Page 26]</span>
+<a name="page-27" id="page-27" href="#page-27"><span class="break"> </span></a>
+<span class="grey"><a href="http://tools.ietf.org/html/rfc3986">RFC 3986</a>                   URI Generic Syntax               January 2005</span>
+
+
+<span class="h3"><h3><a name="section-4.3">4.3</a>.  Absolute URI</h3></span>
+
+   Some protocol elements allow only the absolute form of a URI without
+   a fragment identifier.  For example, defining a base URI for later
+   use by relative references calls for an absolute-URI syntax rule that
+   does not allow a fragment.
+
+      absolute-URI  = scheme ":" hier-part [ "?" query ]
+
+   URI scheme specifications must define their own syntax so that all
+   strings matching their scheme-specific syntax will also match the
+   &lt;absolute-URI&gt; grammar.  Scheme specifications will not define
+   fragment identifier syntax or usage, regardless of its applicability
+   to resources identifiable via that scheme, as fragment identification
+   is orthogonal to scheme definition.  However, scheme specifications
+   are encouraged to include a wide range of examples, including
+   examples that show use of the scheme's URIs with fragment identifiers
+   when such usage is appropriate.
+
+<span class="h3"><h3><a name="section-4.4">4.4</a>.  Same-Document Reference</h3></span>
+
+   When a URI reference refers to a URI that is, aside from its fragment
+   component (if any), identical to the base URI (<a href="#section-5.1">Section 5.1</a>), that
+   reference is called a "same-document" reference.  The most frequent
+   examples of same-document references are relative references that are
+   empty or include only the number sign ("#") separator followed by a
+   fragment identifier.
+
+   When a same-document reference is dereferenced for a retrieval
+   action, the target of that reference is defined to be within the same
+   entity (representation, document, or message) as the reference;
+   therefore, a dereference should not result in a new retrieval action.
+
+   Normalization of the base and target URIs prior to their comparison,
+   as described in Sections 6.2.2 and 6.2.3, is allowed but rarely
+   performed in practice.  Normalization may increase the set of same-
+   document references, which may be of benefit to some caching
+   applications.  As such, reference authors should not assume that a
+   slightly different, though equivalent, reference URI will (or will
+   not) be interpreted as a same-document reference by any given
+   application.
+
+<span class="h3"><h3><a name="section-4.5">4.5</a>.  Suffix Reference</h3></span>
+
+   The URI syntax is designed for unambiguous reference to resources and
+   extensibility via the URI scheme.  However, as URI identification and
+   usage have become commonplace, traditional media (television, radio,
+   newspapers, billboards, etc.) have increasingly used a suffix of the
+
+
+
+<span class="grey">Berners-Lee, et al.         Standards Track                    [Page 27]</span>
+<a name="page-28" id="page-28" href="#page-28"><span class="break"> </span></a>
+<span class="grey"><a href="http://tools.ietf.org/html/rfc3986">RFC 3986</a>                   URI Generic Syntax               January 2005</span>
+
+
+   URI as a reference, consisting of only the authority and path
+   portions of the URI, such as
+
+      www.w3.org/Addressing/
+
+   or simply a DNS registered name on its own.  Such references are
+   primarily intended for human interpretation rather than for machines,
+   with the assumption that context-based heuristics are sufficient to
+   complete the URI (e.g., most registered names beginning with "www"
+   are likely to have a URI prefix of "http://").  Although there is no
+   standard set of heuristics for disambiguating a URI suffix, many
+   client implementations allow them to be entered by the user and
+   heuristically resolved.
+
+   Although this practice of using suffix references is common, it
+   should be avoided whenever possible and should never be used in
+   situations where long-term references are expected.  The heuristics
+   noted above will change over time, particularly when a new URI scheme
+   becomes popular, and are often incorrect when used out of context.
+   Furthermore, they can lead to security issues along the lines of
+   those described in [<a href="http://tools.ietf.org/html/rfc1535" title="&quot;A Security Problem and Proposed Correction With Widely Deployed DNS Software&quot;">RFC1535</a>].
+
+   As a URI suffix has the same syntax as a relative-path reference, a
+   suffix reference cannot be used in contexts where a relative
+   reference is expected.  As a result, suffix references are limited to
+   places where there is no defined base URI, such as dialog boxes and
+   off-line advertisements.
+
+<span class="h2"><h2><a name="section-5">5</a>.  Reference Resolution</h2></span>
+
+   This section defines the process of resolving a URI reference within
+   a context that allows relative references so that the result is a
+   string matching the &lt;URI&gt; syntax rule of <a href="#section-3">Section 3</a>.
+
+<span class="h3"><h3><a name="section-5.1">5.1</a>.  Establishing a Base URI</h3></span>
+
+   The term "relative" implies that a "base URI" exists against which
+   the relative reference is applied.  Aside from fragment-only
+   references (<a href="#section-4.4">Section 4.4</a>), relative references are only usable when a
+   base URI is known.  A base URI must be established by the parser
+   prior to parsing URI references that might be relative.  A base URI
+   must conform to the &lt;absolute-URI&gt; syntax rule (<a href="#section-4.3">Section 4.3</a>).  If the
+   base URI is obtained from a URI reference, then that reference must
+   be converted to absolute form and stripped of any fragment component
+   prior to its use as a base URI.
+
+
+
+
+
+
+<span class="grey">Berners-Lee, et al.         Standards Track                    [Page 28]</span>
+<a name="page-29" id="page-29" href="#page-29"><span class="break"> </span></a>
+<span class="grey"><a href="http://tools.ietf.org/html/rfc3986">RFC 3986</a>                   URI Generic Syntax               January 2005</span>
+
+
+   The base URI of a reference can be established in one of four ways,
+   discussed below in order of precedence.  The order of precedence can
+   be thought of in terms of layers, where the innermost defined base
+   URI has the highest precedence.  This can be visualized graphically
+   as follows:
+
+         .----------------------------------------------------------.
+         |  .----------------------------------------------------.  |
+         |  |  .----------------------------------------------.  |  |
+         |  |  |  .----------------------------------------.  |  |  |
+         |  |  |  |  .----------------------------------.  |  |  |  |
+         |  |  |  |  |       &lt;relative-reference&gt;       |  |  |  |  |
+         |  |  |  |  `----------------------------------'  |  |  |  |
+         |  |  |  | (5.1.1) Base URI embedded in content   |  |  |  |
+         |  |  |  `----------------------------------------'  |  |  |
+         |  |  | (5.1.2) Base URI of the encapsulating entity |  |  |
+         |  |  |         (message, representation, or none)   |  |  |
+         |  |  `----------------------------------------------'  |  |
+         |  | (5.1.3) URI used to retrieve the entity            |  |
+         |  `----------------------------------------------------'  |
+         | (5.1.4) Default Base URI (application-dependent)         |
+         `----------------------------------------------------------'
+
+<span class="h4"><h4><a name="section-5.1.1">5.1.1</a>.  Base URI Embedded in Content</h4></span>
+
+   Within certain media types, a base URI for relative references can be
+   embedded within the content itself so that it can be readily obtained
+   by a parser.  This can be useful for descriptive documents, such as
+   tables of contents, which may be transmitted to others through
+   protocols other than their usual retrieval context (e.g., email or
+   USENET news).
+
+   It is beyond the scope of this specification to specify how, for each
+   media type, a base URI can be embedded.  The appropriate syntax, when
+   available, is described by the data format specification associated
+   with each media type.
+
+<span class="h4"><h4><a name="section-5.1.2">5.1.2</a>.  Base URI from the Encapsulating Entity</h4></span>
+
+   If no base URI is embedded, the base URI is defined by the
+   representation's retrieval context.  For a document that is enclosed
+   within another entity, such as a message or archive, the retrieval
+   context is that entity.  Thus, the default base URI of a
+   representation is the base URI of the entity in which the
+   representation is encapsulated.
+
+
+
+
+
+
+<span class="grey">Berners-Lee, et al.         Standards Track                    [Page 29]</span>
+<a name="page-30" id="page-30" href="#page-30"><span class="break"> </span></a>
+<span class="grey"><a href="http://tools.ietf.org/html/rfc3986">RFC 3986</a>                   URI Generic Syntax               January 2005</span>
+
+
+   A mechanism for embedding a base URI within MIME container types
+   (e.g., the message and multipart types) is defined by MHTML
+   [<a href="http://tools.ietf.org/html/rfc2557" title="&quot;MIME Encapsulation of Aggregate Documents, such as HTML (MHTML)&quot;">RFC2557</a>].  Protocols that do not use the MIME message header syntax,
+   but that do allow some form of tagged metadata to be included within
+   messages, may define their own syntax for defining a base URI as part
+   of a message.
+
+<span class="h4"><h4><a name="section-5.1.3">5.1.3</a>.  Base URI from the Retrieval URI</h4></span>
+
+   If no base URI is embedded and the representation is not encapsulated
+   within some other entity, then, if a URI was used to retrieve the
+   representation, that URI shall be considered the base URI.  Note that
+   if the retrieval was the result of a redirected request, the last URI
+   used (i.e., the URI that resulted in the actual retrieval of the
+   representation) is the base URI.
+
+<span class="h4"><h4><a name="section-5.1.4">5.1.4</a>.  Default Base URI</h4></span>
+
+   If none of the conditions described above apply, then the base URI is
+   defined by the context of the application.  As this definition is
+   necessarily application-dependent, failing to define a base URI by
+   using one of the other methods may result in the same content being
+   interpreted differently by different types of applications.
+
+   A sender of a representation containing relative references is
+   responsible for ensuring that a base URI for those references can be
+   established.  Aside from fragment-only references, relative
+   references can only be used reliably in situations where the base URI
+   is well defined.
+
+<span class="h3"><h3><a name="section-5.2">5.2</a>.  Relative Resolution</h3></span>
+
+   This section describes an algorithm for converting a URI reference
+   that might be relative to a given base URI into the parsed components
+   of the reference's target.  The components can then be recomposed, as
+   described in <a href="#section-5.3">Section 5.3</a>, to form the target URI.  This algorithm
+   provides definitive results that can be used to test the output of
+   other implementations.  Applications may implement relative reference
+   resolution by using some other algorithm, provided that the results
+   match what would be given by this one.
+
+
+
+
+
+
+
+
+
+
+
+<span class="grey">Berners-Lee, et al.         Standards Track                    [Page 30]</span>
+<a name="page-31" id="page-31" href="#page-31"><span class="break"> </span></a>
+<span class="grey"><a href="http://tools.ietf.org/html/rfc3986">RFC 3986</a>                   URI Generic Syntax               January 2005</span>
+
+
+<span class="h4"><h4><a name="section-5.2.1">5.2.1</a>.  Pre-parse the Base URI</h4></span>
+
+   The base URI (Base) is established according to the procedure of
+   <a href="#section-5.1">Section 5.1</a> and parsed into the five main components described in
+   <a href="#section-3">Section 3</a>.  Note that only the scheme component is required to be
+   present in a base URI; the other components may be empty or
+   undefined.  A component is undefined if its associated delimiter does
+   not appear in the URI reference; the path component is never
+   undefined, though it may be empty.
+
+   Normalization of the base URI, as described in Sections 6.2.2 and
+   6.2.3, is optional.  A URI reference must be transformed to its
+   target URI before it can be normalized.
+
+<span class="h4"><h4><a name="section-5.2.2">5.2.2</a>.  Transform References</h4></span>
+
+   For each URI reference (R), the following pseudocode describes an
+   algorithm for transforming R into its target URI (T):
+
+      -- The URI reference is parsed into the five URI components
+      --
+      (R.scheme, R.authority, R.path, R.query, R.fragment) = parse(R);
+
+      -- A non-strict parser may ignore a scheme in the reference
+      -- if it is identical to the base URI's scheme.
+      --
+      if ((not strict) and (R.scheme == Base.scheme)) then
+         undefine(R.scheme);
+      endif;
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+<span class="grey">Berners-Lee, et al.         Standards Track                    [Page 31]</span>
+<a name="page-32" id="page-32" href="#page-32"><span class="break"> </span></a>
+<span class="grey"><a href="http://tools.ietf.org/html/rfc3986">RFC 3986</a>                   URI Generic Syntax               January 2005</span>
+
+
+      if defined(R.scheme) then
+         T.scheme    = R.scheme;
+         T.authority = R.authority;
+         T.path      = remove_dot_segments(R.path);
+         T.query     = R.query;
+      else
+         if defined(R.authority) then
+            T.authority = R.authority;
+            T.path      = remove_dot_segments(R.path);
+            T.query     = R.query;
+         else
+            if (R.path == "") then
+               T.path = Base.path;
+               if defined(R.query) then
+                  T.query = R.query;
+               else
+                  T.query = Base.query;
+               endif;
+            else
+               if (R.path starts-with "/") then
+                  T.path = remove_dot_segments(R.path);
+               else
+                  T.path = merge(Base.path, R.path);
+                  T.path = remove_dot_segments(T.path);
+               endif;
+               T.query = R.query;
+            endif;
+            T.authority = Base.authority;
+         endif;
+         T.scheme = Base.scheme;
+      endif;
+
+      T.fragment = R.fragment;
+
+<span class="h4"><h4><a name="section-5.2.3">5.2.3</a>.  Merge Paths</h4></span>
+
+   The pseudocode above refers to a "merge" routine for merging a
+   relative-path reference with the path of the base URI.  This is
+   accomplished as follows:
+
+   o  If the base URI has a defined authority component and an empty
+      path, then return a string consisting of "/" concatenated with the
+      reference's path; otherwise,
+
+
+
+
+
+
+
+
+<span class="grey">Berners-Lee, et al.         Standards Track                    [Page 32]</span>
+<a name="page-33" id="page-33" href="#page-33"><span class="break"> </span></a>
+<span class="grey"><a href="http://tools.ietf.org/html/rfc3986">RFC 3986</a>                   URI Generic Syntax               January 2005</span>
+
+
+   o  return a string consisting of the reference's path component
+      appended to all but the last segment of the base URI's path (i.e.,
+      excluding any characters after the right-most "/" in the base URI
+      path, or excluding the entire base URI path if it does not contain
+      any "/" characters).
+
+<span class="h4"><h4><a name="section-5.2.4">5.2.4</a>.  Remove Dot Segments</h4></span>
+
+   The pseudocode also refers to a "remove_dot_segments" routine for
+   interpreting and removing the special "." and ".." complete path
+   segments from a referenced path.  This is done after the path is
+   extracted from a reference, whether or not the path was relative, in
+   order to remove any invalid or extraneous dot-segments prior to
+   forming the target URI.  Although there are many ways to accomplish
+   this removal process, we describe a simple method using two string
+   buffers.
+
+   1.  The input buffer is initialized with the now-appended path
+       components and the output buffer is initialized to the empty
+       string.
+
+   2.  While the input buffer is not empty, loop as follows:
+
+       A.  If the input buffer begins with a prefix of "../" or "./",
+           then remove that prefix from the input buffer; otherwise,
+
+       B.  if the input buffer begins with a prefix of "/./" or "/.",
+           where "." is a complete path segment, then replace that
+           prefix with "/" in the input buffer; otherwise,
+
+       C.  if the input buffer begins with a prefix of "/../" or "/..",
+           where ".." is a complete path segment, then replace that
+           prefix with "/" in the input buffer and remove the last
+           segment and its preceding "/" (if any) from the output
+           buffer; otherwise,
+
+       D.  if the input buffer consists only of "." or "..", then remove
+           that from the input buffer; otherwise,
+
+       E.  move the first path segment in the input buffer to the end of
+           the output buffer, including the initial "/" character (if
+           any) and any subsequent characters up to, but not including,
+           the next "/" character or the end of the input buffer.
+
+   3.  Finally, the output buffer is returned as the result of
+       remove_dot_segments.
+
+
+
+
+
+<span class="grey">Berners-Lee, et al.         Standards Track                    [Page 33]</span>
+<a name="page-34" id="page-34" href="#page-34"><span class="break"> </span></a>
+<span class="grey"><a href="http://tools.ietf.org/html/rfc3986">RFC 3986</a>                   URI Generic Syntax               January 2005</span>
+
+
+   Note that dot-segments are intended for use in URI references to
+   express an identifier relative to the hierarchy of names in the base
+   URI.  The remove_dot_segments algorithm respects that hierarchy by
+   removing extra dot-segments rather than treat them as an error or
+   leaving them to be misinterpreted by dereference implementations.
+
+   The following illustrates how the above steps are applied for two
+   examples of merged paths, showing the state of the two buffers after
+   each step.
+
+      STEP   OUTPUT BUFFER         INPUT BUFFER
+
+       1 :                         /a/b/c/./../../g
+       2E:   /a                    /b/c/./../../g
+       2E:   /a/b                  /c/./../../g
+       2E:   /a/b/c                /./../../g
+       2B:   /a/b/c                /../../g
+       2C:   /a/b                  /../g
+       2C:   /a                    /g
+       2E:   /a/g
+
+      STEP   OUTPUT BUFFER         INPUT BUFFER
+
+       <a href="#section-1">1</a> :                         mid/content=5/../6
+       2E:   mid                   /content=5/../6
+       2E:   mid/content=5         /../6
+       2C:   mid                   /6
+       2E:   mid/6
+
+   Some applications may find it more efficient to implement the
+   remove_dot_segments algorithm by using two segment stacks rather than
+   strings.
+
+      Note: Beware that some older, erroneous implementations will fail
+      to separate a reference's query component from its path component
+      prior to merging the base and reference paths, resulting in an
+      interoperability failure if the query component contains the
+      strings "/../" or "/./".
+
+
+
+
+
+
+
+
+
+
+
+
+
+<span class="grey">Berners-Lee, et al.         Standards Track                    [Page 34]</span>
+<a name="page-35" id="page-35" href="#page-35"><span class="break"> </span></a>
+<span class="grey"><a href="http://tools.ietf.org/html/rfc3986">RFC 3986</a>                   URI Generic Syntax               January 2005</span>
+
+
+<span class="h3"><h3><a name="section-5.3">5.3</a>.  Component Recomposition</h3></span>
+
+   Parsed URI components can be recomposed to obtain the corresponding
+   URI reference string.  Using pseudocode, this would be:
+
+      result = ""
+
+      if defined(scheme) then
+         append scheme to result;
+         append ":" to result;
+      endif;
+
+      if defined(authority) then
+         append "//" to result;
+         append authority to result;
+      endif;
+
+      append path to result;
+
+      if defined(query) then
+         append "?" to result;
+         append query to result;
+      endif;
+
+      if defined(fragment) then
+         append "#" to result;
+         append fragment to result;
+      endif;
+
+      return result;
+
+   Note that we are careful to preserve the distinction between a
+   component that is undefined, meaning that its separator was not
+   present in the reference, and a component that is empty, meaning that
+   the separator was present and was immediately followed by the next
+   component separator or the end of the reference.
+
+<span class="h3"><h3><a name="section-5.4">5.4</a>.  Reference Resolution Examples</h3></span>
+
+   Within a representation with a well defined base URI of
+
+      http://a/b/c/d;p?q
+
+   a relative reference is transformed to its target URI as follows.
+
+
+
+
+
+
+
+<span class="grey">Berners-Lee, et al.         Standards Track                    [Page 35]</span>
+<a name="page-36" id="page-36" href="#page-36"><span class="break"> </span></a>
+<span class="grey"><a href="http://tools.ietf.org/html/rfc3986">RFC 3986</a>                   URI Generic Syntax               January 2005</span>
+
+
+<span class="h4"><h4><a name="section-5.4.1">5.4.1</a>.  Normal Examples</h4></span>
+
+      "g:h"           =  "g:h"
+      "g"             =  "<a href="http://a/b/c/g">http://a/b/c/g</a>"
+      "./g"           =  "<a href="http://a/b/c/g">http://a/b/c/g</a>"
+      "g/"            =  "<a href="http://a/b/c/g/">http://a/b/c/g/</a>"
+      "/g"            =  "<a href="http://a/g">http://a/g</a>"
+      "//g"           =  "http://g"
+      "?y"            =  "http://a/b/c/d;p?y"
+      "g?y"           =  "<a href="http://a/b/c/g?y">http://a/b/c/g?y</a>"
+      "#s"            =  "http://a/b/c/d;p?q#s"
+      "g#s"           =  "<a href="http://a/b/c/g#s">http://a/b/c/g#s</a>"
+      "g?y#s"         =  "<a href="http://a/b/c/g?y#s">http://a/b/c/g?y#s</a>"
+      ";x"            =  "http://a/b/c/;x"
+      "g;x"           =  "http://a/b/c/g;x"
+      "g;x?y#s"       =  "http://a/b/c/g;x?y#s"
+      ""              =  "http://a/b/c/d;p?q"
+      "."             =  "<a href="http://a/b/c/">http://a/b/c/</a>"
+      "./"            =  "<a href="http://a/b/c/">http://a/b/c/</a>"
+      ".."            =  "<a href="http://a/b/">http://a/b/</a>"
+      "../"           =  "<a href="http://a/b/">http://a/b/</a>"
+      "../g"          =  "<a href="http://a/b/g">http://a/b/g</a>"
+      "../.."         =  "<a href="http://a/">http://a/</a>"
+      "../../"        =  "<a href="http://a/">http://a/</a>"
+      "../../g"       =  "<a href="http://a/g">http://a/g</a>"
+
+<span class="h4"><h4><a name="section-5.4.2">5.4.2</a>.  Abnormal Examples</h4></span>
+
+   Although the following abnormal examples are unlikely to occur in
+   normal practice, all URI parsers should be capable of resolving them
+   consistently.  Each example uses the same base as that above.
+
+   Parsers must be careful in handling cases where there are more ".."
+   segments in a relative-path reference than there are hierarchical
+   levels in the base URI's path.  Note that the ".." syntax cannot be
+   used to change the authority component of a URI.
+
+      "../../../g"    =  "<a href="http://a/g">http://a/g</a>"
+      "../../../../g" =  "<a href="http://a/g">http://a/g</a>"
+
+
+
+
+
+
+
+
+
+
+
+
+<span class="grey">Berners-Lee, et al.         Standards Track                    [Page 36]</span>
+<a name="page-37" id="page-37" href="#page-37"><span class="break"> </span></a>
+<span class="grey"><a href="http://tools.ietf.org/html/rfc3986">RFC 3986</a>                   URI Generic Syntax               January 2005</span>
+
+
+   Similarly, parsers must remove the dot-segments "." and ".." when
+   they are complete components of a path, but not when they are only
+   part of a segment.
+
+      "/./g"          =  "<a href="http://a/g">http://a/g</a>"
+      "/../g"         =  "<a href="http://a/g">http://a/g</a>"
+      "g."            =  "<a href="http://a/b/c/g">http://a/b/c/g</a>."
+      ".g"            =  "<a href="http://a/b/c/.g">http://a/b/c/.g</a>"
+      "g.."           =  "<a href="http://a/b/c/g">http://a/b/c/g</a>.."
+      "..g"           =  "<a href="http://a/b/c/..g">http://a/b/c/..g</a>"
+
+   Less likely are cases where the relative reference uses unnecessary
+   or nonsensical forms of the "." and ".." complete path segments.
+
+      "./../g"        =  "<a href="http://a/b/g">http://a/b/g</a>"
+      "./g/."         =  "<a href="http://a/b/c/g/">http://a/b/c/g/</a>"
+      "g/./h"         =  "<a href="http://a/b/c/g/h">http://a/b/c/g/h</a>"
+      "g/../h"        =  "<a href="http://a/b/c/h">http://a/b/c/h</a>"
+      "g;x=1/./y"     =  "http://a/b/c/g;x=1/y"
+      "g;x=1/../y"    =  "<a href="http://a/b/c/y">http://a/b/c/y</a>"
+
+   Some applications fail to separate the reference's query and/or
+   fragment components from the path component before merging it with
+   the base path and removing dot-segments.  This error is rarely
+   noticed, as typical usage of a fragment never includes the hierarchy
+   ("/") character and the query component is not normally used within
+   relative references.
+
+      "g?y/./x"       =  "<a href="http://a/b/c/g?y/./x">http://a/b/c/g?y/./x</a>"
+      "g?y/../x"      =  "<a href="http://a/b/c/g?y/../x">http://a/b/c/g?y/../x</a>"
+      "g#s/./x"       =  "<a href="http://a/b/c/g#s/./x">http://a/b/c/g#s/./x</a>"
+      "g#s/../x"      =  "<a href="http://a/b/c/g#s/../x">http://a/b/c/g#s/../x</a>"
+
+   Some parsers allow the scheme name to be present in a relative
+   reference if it is the same as the base URI scheme.  This is
+   considered to be a loophole in prior specifications of partial URI
+   [<a href="http://tools.ietf.org/html/rfc1630" title="&quot;Universal Resource Identifiers in WWW: A Unifying Syntax for the Expression of Names and Addresses of Objects on the Network as used in the World-Wide Web&quot;">RFC1630</a>].  Its use should be avoided but is allowed for backward
+   compatibility.
+
+      "http:g"        =  "http:g"         ; for strict parsers
+                      /  "<a href="http://a/b/c/g">http://a/b/c/g</a>" ; for backward compatibility
+
+
+
+
+
+
+
+
+
+
+<span class="grey">Berners-Lee, et al.         Standards Track                    [Page 37]</span>
+<a name="page-38" id="page-38" href="#page-38"><span class="break"> </span></a>
+<span class="grey"><a href="http://tools.ietf.org/html/rfc3986">RFC 3986</a>                   URI Generic Syntax               January 2005</span>
+
+
+<span class="h2"><h2><a name="section-6">6</a>.  Normalization and Comparison</h2></span>
+
+   One of the most common operations on URIs is simple comparison:
+   determining whether two URIs are equivalent without using the URIs to
+   access their respective resource(s).  A comparison is performed every
+   time a response cache is accessed, a browser checks its history to
+   color a link, or an XML parser processes tags within a namespace.
+   Extensive normalization prior to comparison of URIs is often used by
+   spiders and indexing engines to prune a search space or to reduce
+   duplication of request actions and response storage.
+
+   URI comparison is performed for some particular purpose.  Protocols
+   or implementations that compare URIs for different purposes will
+   often be subject to differing design trade-offs in regards to how
+   much effort should be spent in reducing aliased identifiers.  This
+   section describes various methods that may be used to compare URIs,
+   the trade-offs between them, and the types of applications that might
+   use them.
+
+<span class="h3"><h3><a name="section-6.1">6.1</a>.  Equivalence</h3></span>
+
+   Because URIs exist to identify resources, presumably they should be
+   considered equivalent when they identify the same resource.  However,
+   this definition of equivalence is not of much practical use, as there
+   is no way for an implementation to compare two resources unless it
+   has full knowledge or control of them.  For this reason,
+   determination of equivalence or difference of URIs is based on string
+   comparison, perhaps augmented by reference to additional rules
+   provided by URI scheme definitions.  We use the terms "different" and
+   "equivalent" to describe the possible outcomes of such comparisons,
+   but there are many application-dependent versions of equivalence.
+
+   Even though it is possible to determine that two URIs are equivalent,
+   URI comparison is not sufficient to determine whether two URIs
+   identify different resources.  For example, an owner of two different
+   domain names could decide to serve the same resource from both,
+   resulting in two different URIs.  Therefore, comparison methods are
+   designed to minimize false negatives while strictly avoiding false
+   positives.
+
+   In testing for equivalence, applications should not directly compare
+   relative references; the references should be converted to their
+   respective target URIs before comparison.  When URIs are compared to
+   select (or avoid) a network action, such as retrieval of a
+   representation, fragment components (if any) should be excluded from
+   the comparison.
+
+
+
+
+
+<span class="grey">Berners-Lee, et al.         Standards Track                    [Page 38]</span>
+<a name="page-39" id="page-39" href="#page-39"><span class="break"> </span></a>
+<span class="grey"><a href="http://tools.ietf.org/html/rfc3986">RFC 3986</a>                   URI Generic Syntax               January 2005</span>
+
+
+<span class="h3"><h3><a name="section-6.2">6.2</a>.  Comparison Ladder</h3></span>
+
+   A variety of methods are used in practice to test URI equivalence.
+   These methods fall into a range, distinguished by the amount of
+   processing required and the degree to which the probability of false
+   negatives is reduced.  As noted above, false negatives cannot be
+   eliminated.  In practice, their probability can be reduced, but this
+   reduction requires more processing and is not cost-effective for all
+   applications.
+
+   If this range of comparison practices is considered as a ladder, the
+   following discussion will climb the ladder, starting with practices
+   that are cheap but have a relatively higher chance of producing false
+   negatives, and proceeding to those that have higher computational
+   cost and lower risk of false negatives.
+
+<span class="h4"><h4><a name="section-6.2.1">6.2.1</a>.  Simple String Comparison</h4></span>
+
+   If two URIs, when considered as character strings, are identical,
+   then it is safe to conclude that they are equivalent.  This type of
+   equivalence test has very low computational cost and is in wide use
+   in a variety of applications, particularly in the domain of parsing.
+
+   Testing strings for equivalence requires some basic precautions.
+   This procedure is often referred to as "bit-for-bit" or
+   "byte-for-byte" comparison, which is potentially misleading.  Testing
+   strings for equality is normally based on pair comparison of the
+   characters that make up the strings, starting from the first and
+   proceeding until both strings are exhausted and all characters are
+   found to be equal, until a pair of characters compares unequal, or
+   until one of the strings is exhausted before the other.
+
+   This character comparison requires that each pair of characters be
+   put in comparable form.  For example, should one URI be stored in a
+   byte array in EBCDIC encoding and the second in a Java String object
+   (UTF-16), bit-for-bit comparisons applied naively will produce
+   errors.  It is better to speak of equality on a character-for-
+   character basis rather than on a byte-for-byte or bit-for-bit basis.
+   In practical terms, character-by-character comparisons should be done
+   codepoint-by-codepoint after conversion to a common character
+   encoding.
+
+   False negatives are caused by the production and use of URI aliases.
+   Unnecessary aliases can be reduced, regardless of the comparison
+   method, by consistently providing URI references in an already-
+   normalized form (i.e., a form identical to what would be produced
+   after normalization is applied, as described below).
+
+
+
+
+<span class="grey">Berners-Lee, et al.         Standards Track                    [Page 39]</span>
+<a name="page-40" id="page-40" href="#page-40"><span class="break"> </span></a>
+<span class="grey"><a href="http://tools.ietf.org/html/rfc3986">RFC 3986</a>                   URI Generic Syntax               January 2005</span>
+
+
+   Protocols and data formats often limit some URI comparisons to simple
+   string comparison, based on the theory that people and
+   implementations will, in their own best interest, be consistent in
+   providing URI references, or at least consistent enough to negate any
+   efficiency that might be obtained from further normalization.
+
+<span class="h4"><h4><a name="section-6.2.2">6.2.2</a>.  Syntax-Based Normalization</h4></span>
+
+   Implementations may use logic based on the definitions provided by
+   this specification to reduce the probability of false negatives.
+   This processing is moderately higher in cost than character-for-
+   character string comparison.  For example, an application using this
+   approach could reasonably consider the following two URIs equivalent:
+
+      example://a/b/c/%7Bfoo%7D
+      eXAMPLE://a/./b/../b/%63/%7bfoo%7d
+
+   Web user agents, such as browsers, typically apply this type of URI
+   normalization when determining whether a cached response is
+   available.  Syntax-based normalization includes such techniques as
+   case normalization, percent-encoding normalization, and removal of
+   dot-segments.
+
+<span class="h5"><h5><a name="section-6.2.2.1">6.2.2.1</a>.  Case Normalization</h5></span>
+
+   For all URIs, the hexadecimal digits within a percent-encoding
+   triplet (e.g., "%3a" versus "%3A") are case-insensitive and therefore
+   should be normalized to use uppercase letters for the digits A-F.
+
+   When a URI uses components of the generic syntax, the component
+   syntax equivalence rules always apply; namely, that the scheme and
+   host are case-insensitive and therefore should be normalized to
+   lowercase.  For example, the URI &lt;HTTP://www.EXAMPLE.com/&gt; is
+   equivalent to &lt;http://www.example.com/&gt;.  The other generic syntax
+   components are assumed to be case-sensitive unless specifically
+   defined otherwise by the scheme (see <a href="#section-6.2.3">Section 6.2.3</a>).
+
+<span class="h5"><h5><a name="section-6.2.2.2">6.2.2.2</a>.  Percent-Encoding Normalization</h5></span>
+
+   The percent-encoding mechanism (<a href="#section-2.1">Section 2.1</a>) is a frequent source of
+   variance among otherwise identical URIs.  In addition to the case
+   normalization issue noted above, some URI producers percent-encode
+   octets that do not require percent-encoding, resulting in URIs that
+   are equivalent to their non-encoded counterparts.  These URIs should
+   be normalized by decoding any percent-encoded octet that corresponds
+   to an unreserved character, as described in <a href="#section-2.3">Section 2.3</a>.
+
+
+
+
+
+<span class="grey">Berners-Lee, et al.         Standards Track                    [Page 40]</span>
+<a name="page-41" id="page-41" href="#page-41"><span class="break"> </span></a>
+<span class="grey"><a href="http://tools.ietf.org/html/rfc3986">RFC 3986</a>                   URI Generic Syntax               January 2005</span>
+
+
+<span class="h5"><h5><a name="section-6.2.2.3">6.2.2.3</a>.  Path Segment Normalization</h5></span>
+
+   The complete path segments "." and ".." are intended only for use
+   within relative references (<a href="#section-4.1">Section 4.1</a>) and are removed as part of
+   the reference resolution process (<a href="#section-5.2">Section 5.2</a>).  However, some
+   deployed implementations incorrectly assume that reference resolution
+   is not necessary when the reference is already a URI and thus fail to
+   remove dot-segments when they occur in non-relative paths.  URI
+   normalizers should remove dot-segments by applying the
+   remove_dot_segments algorithm to the path, as described in
+   <a href="#section-5.2.4">Section 5.2.4</a>.
+
+<span class="h4"><h4><a name="section-6.2.3">6.2.3</a>.  Scheme-Based Normalization</h4></span>
+
+   The syntax and semantics of URIs vary from scheme to scheme, as
+   described by the defining specification for each scheme.
+   Implementations may use scheme-specific rules, at further processing
+   cost, to reduce the probability of false negatives.  For example,
+   because the "http" scheme makes use of an authority component, has a
+   default port of "80", and defines an empty path to be equivalent to
+   "/", the following four URIs are equivalent:
+
+      http://example.com
+      http://example.com/
+      <a href="http://example.com/">http://example.com:/</a>
+      <a href="http://example.com/">http://example.com:80/</a>
+
+   In general, a URI that uses the generic syntax for authority with an
+   empty path should be normalized to a path of "/".  Likewise, an
+   explicit ":port", for which the port is empty or the default for the
+   scheme, is equivalent to one where the port and its ":" delimiter are
+   elided and thus should be removed by scheme-based normalization.  For
+   example, the second URI above is the normal form for the "http"
+   scheme.
+
+   Another case where normalization varies by scheme is in the handling
+   of an empty authority component or empty host subcomponent.  For many
+   scheme specifications, an empty authority or host is considered an
+   error; for others, it is considered equivalent to "localhost" or the
+   end-user's host.  When a scheme defines a default for authority and a
+   URI reference to that default is desired, the reference should be
+   normalized to an empty authority for the sake of uniformity, brevity,
+   and internationalization.  If, however, either the userinfo or port
+   subcomponents are non-empty, then the host should be given explicitly
+   even if it matches the default.
+
+   Normalization should not remove delimiters when their associated
+   component is empty unless licensed to do so by the scheme
+
+
+
+<span class="grey">Berners-Lee, et al.         Standards Track                    [Page 41]</span>
+<a name="page-42" id="page-42" href="#page-42"><span class="break"> </span></a>
+<span class="grey"><a href="http://tools.ietf.org/html/rfc3986">RFC 3986</a>                   URI Generic Syntax               January 2005</span>
+
+
+   specification.  For example, the URI "http://example.com/?" cannot be
+   assumed to be equivalent to any of the examples above.  Likewise, the
+   presence or absence of delimiters within a userinfo subcomponent is
+   usually significant to its interpretation.  The fragment component is
+   not subject to any scheme-based normalization; thus, two URIs that
+   differ only by the suffix "#" are considered different regardless of
+   the scheme.
+
+   Some schemes define additional subcomponents that consist of case-
+   insensitive data, giving an implicit license to normalizers to
+   convert this data to a common case (e.g., all lowercase).  For
+   example, URI schemes that define a subcomponent of path to contain an
+   Internet hostname, such as the "mailto" URI scheme, cause that
+   subcomponent to be case-insensitive and thus subject to case
+   normalization (e.g., "mailto:Joe@Example.COM" is equivalent to
+   "mailto:Joe@example.com", even though the generic syntax considers
+   the path component to be case-sensitive).
+
+   Other scheme-specific normalizations are possible.
+
+<span class="h4"><h4><a name="section-6.2.4">6.2.4</a>.  Protocol-Based Normalization</h4></span>
+
+   Substantial effort to reduce the incidence of false negatives is
+   often cost-effective for web spiders.  Therefore, they implement even
+   more aggressive techniques in URI comparison.  For example, if they
+   observe that a URI such as
+
+      http://example.com/data
+
+   redirects to a URI differing only in the trailing slash
+
+      http://example.com/data/
+
+   they will likely regard the two as equivalent in the future.  This
+   kind of technique is only appropriate when equivalence is clearly
+   indicated by both the result of accessing the resources and the
+   common conventions of their scheme's dereference algorithm (in this
+   case, use of redirection by HTTP origin servers to avoid problems
+   with relative references).
+
+
+
+
+
+
+
+
+
+
+
+
+<span class="grey">Berners-Lee, et al.         Standards Track                    [Page 42]</span>
+<a name="page-43" id="page-43" href="#page-43"><span class="break"> </span></a>
+<span class="grey"><a href="http://tools.ietf.org/html/rfc3986">RFC 3986</a>                   URI Generic Syntax               January 2005</span>
+
+
+<span class="h2"><h2><a name="section-7">7</a>.  Security Considerations</h2></span>
+
+   A URI does not in itself pose a security threat.  However, as URIs
+   are often used to provide a compact set of instructions for access to
+   network resources, care must be taken to properly interpret the data
+   within a URI, to prevent that data from causing unintended access,
+   and to avoid including data that should not be revealed in plain
+   text.
+
+<span class="h3"><h3><a name="section-7.1">7.1</a>.  Reliability and Consistency</h3></span>
+
+   There is no guarantee that once a URI has been used to retrieve
+   information, the same information will be retrievable by that URI in
+   the future.  Nor is there any guarantee that the information
+   retrievable via that URI in the future will be observably similar to
+   that retrieved in the past.  The URI syntax does not constrain how a
+   given scheme or authority apportions its namespace or maintains it
+   over time.  Such guarantees can only be obtained from the person(s)
+   controlling that namespace and the resource in question.  A specific
+   URI scheme may define additional semantics, such as name persistence,
+   if those semantics are required of all naming authorities for that
+   scheme.
+
+<span class="h3"><h3><a name="section-7.2">7.2</a>.  Malicious Construction</h3></span>
+
+   It is sometimes possible to construct a URI so that an attempt to
+   perform a seemingly harmless, idempotent operation, such as the
+   retrieval of a representation, will in fact cause a possibly damaging
+   remote operation.  The unsafe URI is typically constructed by
+   specifying a port number other than that reserved for the network
+   protocol in question.  The client unwittingly contacts a site running
+   a different protocol service, and data within the URI contains
+   instructions that, when interpreted according to this other protocol,
+   cause an unexpected operation.  A frequent example of such abuse has
+   been the use of a protocol-based scheme with a port component of
+   "25", thereby fooling user agent software into sending an unintended
+   or impersonating message via an SMTP server.
+
+   Applications should prevent dereference of a URI that specifies a TCP
+   port number within the "well-known port" range (0 - 1023) unless the
+   protocol being used to dereference that URI is compatible with the
+   protocol expected on that well-known port.  Although IANA maintains a
+   registry of well-known ports, applications should make such
+   restrictions user-configurable to avoid preventing the deployment of
+   new services.
+
+
+
+
+
+
+<span class="grey">Berners-Lee, et al.         Standards Track                    [Page 43]</span>
+<a name="page-44" id="page-44" href="#page-44"><span class="break"> </span></a>
+<span class="grey"><a href="http://tools.ietf.org/html/rfc3986">RFC 3986</a>                   URI Generic Syntax               January 2005</span>
+
+
+   When a URI contains percent-encoded octets that match the delimiters
+   for a given resolution or dereference protocol (for example, CR and
+   LF characters for the TELNET protocol), these percent-encodings must
+   not be decoded before transmission across that protocol.  Transfer of
+   the percent-encoding, which might violate the protocol, is less
+   harmful than allowing decoded octets to be interpreted as additional
+   operations or parameters, perhaps triggering an unexpected and
+   possibly harmful remote operation.
+
+<span class="h3"><h3><a name="section-7.3">7.3</a>.  Back-End Transcoding</h3></span>
+
+   When a URI is dereferenced, the data within it is often parsed by
+   both the user agent and one or more servers.  In HTTP, for example, a
+   typical user agent will parse a URI into its five major components,
+   access the authority's server, and send it the data within the
+   authority, path, and query components.  A typical server will take
+   that information, parse the path into segments and the query into
+   key/value pairs, and then invoke implementation-specific handlers to
+   respond to the request.  As a result, a common security concern for
+   server implementations that handle a URI, either as a whole or split
+   into separate components, is proper interpretation of the octet data
+   represented by the characters and percent-encodings within that URI.
+
+   Percent-encoded octets must be decoded at some point during the
+   dereference process.  Applications must split the URI into its
+   components and subcomponents prior to decoding the octets, as
+   otherwise the decoded octets might be mistaken for delimiters.
+   Security checks of the data within a URI should be applied after
+   decoding the octets.  Note, however, that the "%00" percent-encoding
+   (NUL) may require special handling and should be rejected if the
+   application is not expecting to receive raw data within a component.
+
+   Special care should be taken when the URI path interpretation process
+   involves the use of a back-end file system or related system
+   functions.  File systems typically assign an operational meaning to
+   special characters, such as the "/", "\", ":", "[", and "]"
+   characters, and to special device names like ".", "..", "...", "aux",
+   "lpt", etc.  In some cases, merely testing for the existence of such
+   a name will cause the operating system to pause or invoke unrelated
+   system calls, leading to significant security concerns regarding
+   denial of service and unintended data transfer.  It would be
+   impossible for this specification to list all such significant
+   characters and device names.  Implementers should research the
+   reserved names and characters for the types of storage device that
+   may be attached to their applications and restrict the use of data
+   obtained from URI components accordingly.
+
+
+
+
+
+<span class="grey">Berners-Lee, et al.         Standards Track                    [Page 44]</span>
+<a name="page-45" id="page-45" href="#page-45"><span class="break"> </span></a>
+<span class="grey"><a href="http://tools.ietf.org/html/rfc3986">RFC 3986</a>                   URI Generic Syntax               January 2005</span>
+
+
+<span class="h3"><h3><a name="section-7.4">7.4</a>.  Rare IP Address Formats</h3></span>
+
+   Although the URI syntax for IPv4address only allows the common
+   dotted-decimal form of IPv4 address literal, many implementations
+   that process URIs make use of platform-dependent system routines,
+   such as gethostbyname() and inet_aton(), to translate the string
+   literal to an actual IP address.  Unfortunately, such system routines
+   often allow and process a much larger set of formats than those
+   described in <a href="#section-3.2.2">Section 3.2.2</a>.
+
+   For example, many implementations allow dotted forms of three
+   numbers, wherein the last part is interpreted as a 16-bit quantity
+   and placed in the right-most two bytes of the network address (e.g.,
+   a Class B network).  Likewise, a dotted form of two numbers means
+   that the last part is interpreted as a 24-bit quantity and placed in
+   the right-most three bytes of the network address (Class A), and a
+   single number (without dots) is interpreted as a 32-bit quantity and
+   stored directly in the network address.  Adding further to the
+   confusion, some implementations allow each dotted part to be
+   interpreted as decimal, octal, or hexadecimal, as specified in the C
+   language (i.e., a leading 0x or 0X implies hexadecimal; a leading 0
+   implies octal; otherwise, the number is interpreted as decimal).
+
+   These additional IP address formats are not allowed in the URI syntax
+   due to differences between platform implementations.  However, they
+   can become a security concern if an application attempts to filter
+   access to resources based on the IP address in string literal format.
+   If this filtering is performed, literals should be converted to
+   numeric form and filtered based on the numeric value, and not on a
+   prefix or suffix of the string form.
+
+<span class="h3"><h3><a name="section-7.5">7.5</a>.  Sensitive Information</h3></span>
+
+   URI producers should not provide a URI that contains a username or
+   password that is intended to be secret.  URIs are frequently
+   displayed by browsers, stored in clear text bookmarks, and logged by
+   user agent history and intermediary applications (proxies).  A
+   password appearing within the userinfo component is deprecated and
+   should be considered an error (or simply ignored) except in those
+   rare cases where the 'password' parameter is intended to be public.
+
+<span class="h3"><h3><a name="section-7.6">7.6</a>.  Semantic Attacks</h3></span>
+
+   Because the userinfo subcomponent is rarely used and appears before
+   the host in the authority component, it can be used to construct a
+   URI intended to mislead a human user by appearing to identify one
+   (trusted) naming authority while actually identifying a different
+   authority hidden behind the noise.  For example
+
+
+
+<span class="grey">Berners-Lee, et al.         Standards Track                    [Page 45]</span>
+<a name="page-46" id="page-46" href="#page-46"><span class="break"> </span></a>
+<span class="grey"><a href="http://tools.ietf.org/html/rfc3986">RFC 3986</a>                   URI Generic Syntax               January 2005</span>
+
+
+      ftp://cnn.example.com&amp;story=breaking_news@10.0.0.1/top_story.htm
+
+   might lead a human user to assume that the host is 'cnn.example.com',
+   whereas it is actually '10.0.0.1'.  Note that a misleading userinfo
+   subcomponent could be much longer than the example above.
+
+   A misleading URI, such as that above, is an attack on the user's
+   preconceived notions about the meaning of a URI rather than an attack
+   on the software itself.  User agents may be able to reduce the impact
+   of such attacks by distinguishing the various components of the URI
+   when they are rendered, such as by using a different color or tone to
+   render userinfo if any is present, though there is no panacea.  More
+   information on URI-based semantic attacks can be found in [<a href="#ref-Siedzik" title="&quot;Semantic Attacks: What&amp;#39;s in a URL?&quot;">Siedzik</a>].
+
+<span class="h2"><h2><a name="section-8">8</a>.  IANA Considerations</h2></span>
+
+   URI scheme names, as defined by &lt;scheme&gt; in <a href="#section-3.1">Section 3.1</a>, form a
+   registered namespace that is managed by IANA according to the
+   procedures defined in [<a href="#ref-BCP35" title="&quot;Registration Procedures for URL Scheme Names&quot;">BCP35</a>].  No IANA actions are required by this
+   document.
+
+<span class="h2"><h2><a name="section-9">9</a>.  Acknowledgements</h2></span>
+
+   This specification is derived from <a href="http://tools.ietf.org/html/rfc2396">RFC 2396</a> [<a href="http://tools.ietf.org/html/rfc2396" title="&quot;Uniform Resource Identifiers (URI): Generic Syntax&quot;">RFC2396</a>], <a href="http://tools.ietf.org/html/rfc1808">RFC 1808</a>
+   [<a href="http://tools.ietf.org/html/rfc1808" title="&quot;Relative Uniform Resource Locators&quot;">RFC1808</a>], and <a href="http://tools.ietf.org/html/rfc1738">RFC 1738</a> [<a href="http://tools.ietf.org/html/rfc1738" title="&quot;Uniform Resource Locators (URL)&quot;">RFC1738</a>]; the acknowledgements in those
+   documents still apply.  It also incorporates the update (with
+   corrections) for IPv6 literals in the host syntax, as defined by
+   Robert M. Hinden, Brian E. Carpenter, and Larry Masinter in
+   [<a href="http://tools.ietf.org/html/rfc2732" title="&quot;Format for Literal IPv6 Addresses in URL&amp;#39;s&quot;">RFC2732</a>].  In addition, contributions by Gisle Aas, Reese Anschultz,
+   Daniel Barclay, Tim Bray, Mike Brown, Rob Cameron, Jeremy Carroll,
+   Dan Connolly, Adam M. Costello, John Cowan, Jason Diamond, Martin
+   Duerst, Stefan Eissing, Clive D.W. Feather, Al Gilman, Tony Hammond,
+   Elliotte Harold, Pat Hayes, Henry Holtzman, Ian B. Jacobs, Michael
+   Kay, John C. Klensin, Graham Klyne, Dan Kohn, Bruce Lilly, Andrew
+   Main, Dave McAlpin, Ira McDonald, Michael Mealling, Ray Merkert,
+   Stephen Pollei, Julian Reschke, Tomas Rokicki, Miles Sabin, Kai
+   Schaetzl, Mark Thomson, Ronald Tschalaer, Norm Walsh, Marc Warne,
+   Stuart Williams, and Henry Zongaro are gratefully acknowledged.
+
+<span class="h2"><h2><a name="section-10">10</a>.  References</h2></span>
+
+<span class="h3"><h3><a name="section-10.1">10.1</a>.  Normative References</h3></span>
+
+   [<a name="ref-ASCII" id="ref-ASCII">ASCII</a>]    American National Standards Institute, "Coded Character
+              Set -- 7-bit American Standard Code for Information
+              Interchange", ANSI X3.4, 1986.
+
+
+
+
+
+<span class="grey">Berners-Lee, et al.         Standards Track                    [Page 46]</span>
+<a name="page-47" id="page-47" href="#page-47"><span class="break"> </span></a>
+<span class="grey"><a href="http://tools.ietf.org/html/rfc3986">RFC 3986</a>                   URI Generic Syntax               January 2005</span>
+
+
+   [<a name="ref-RFC2234" id="ref-RFC2234">RFC2234</a>]  Crocker, D. and P. Overell, "Augmented BNF for Syntax
+              Specifications: ABNF", <a href="http://tools.ietf.org/html/rfc2234">RFC 2234</a>, November 1997.
+
+   [<a name="ref-STD63" id="ref-STD63">STD63</a>]    Yergeau, F., "UTF-8, a transformation format of
+              ISO 10646", STD 63, <a href="http://tools.ietf.org/html/rfc3629">RFC 3629</a>, November 2003.
+
+   [<a name="ref-UCS" id="ref-UCS">UCS</a>]      International Organization for Standardization,
+              "Information Technology - Universal Multiple-Octet Coded
+              Character Set (UCS)", ISO/IEC 10646:2003, December 2003.
+
+<span class="h3"><h3><a name="section-10.2">10.2</a>.  Informative References</h3></span>
+
+   [<a name="ref-BCP19" id="ref-BCP19">BCP19</a>]    Freed, N. and J. Postel, "IANA Charset Registration
+              Procedures", <a href="http://tools.ietf.org/html/bcp19">BCP 19</a>, <a href="http://tools.ietf.org/html/rfc2978">RFC 2978</a>, October 2000.
+
+   [<a name="ref-BCP35" id="ref-BCP35">BCP35</a>]    Petke, R. and I. King, "Registration Procedures for URL
+              Scheme Names", <a href="http://tools.ietf.org/html/bcp35">BCP 35</a>, <a href="http://tools.ietf.org/html/rfc2717">RFC 2717</a>, November 1999.
+
+   [<a name="ref-RFC0952" id="ref-RFC0952">RFC0952</a>]  Harrenstien, K., Stahl, M., and E. Feinler, "DoD Internet
+              host table specification", <a href="http://tools.ietf.org/html/rfc952">RFC 952</a>, October 1985.
+
+   [<a name="ref-RFC1034" id="ref-RFC1034">RFC1034</a>]  Mockapetris, P., "Domain names - concepts and facilities",
+              STD 13, <a href="http://tools.ietf.org/html/rfc1034">RFC 1034</a>, November 1987.
+
+   [<a name="ref-RFC1123" id="ref-RFC1123">RFC1123</a>]  Braden, R., "Requirements for Internet Hosts - Application
+              and Support", STD 3, <a href="http://tools.ietf.org/html/rfc1123">RFC 1123</a>, October 1989.
+
+   [<a name="ref-RFC1535" id="ref-RFC1535">RFC1535</a>]  Gavron, E., "A Security Problem and Proposed Correction
+              With Widely Deployed DNS Software", <a href="http://tools.ietf.org/html/rfc1535">RFC 1535</a>,
+              October 1993.
+
+   [<a name="ref-RFC1630" id="ref-RFC1630">RFC1630</a>]  Berners-Lee, T., "Universal Resource Identifiers in WWW: A
+              Unifying Syntax for the Expression of Names and Addresses
+              of Objects on the Network as used in the World-Wide Web",
+              <a href="http://tools.ietf.org/html/rfc1630">RFC 1630</a>, June 1994.
+
+   [<a name="ref-RFC1736" id="ref-RFC1736">RFC1736</a>]  Kunze, J., "Functional Recommendations for Internet
+              Resource Locators", <a href="http://tools.ietf.org/html/rfc1736">RFC 1736</a>, February 1995.
+
+   [<a name="ref-RFC1737" id="ref-RFC1737">RFC1737</a>]  Sollins, K. and L. Masinter, "Functional Requirements for
+              Uniform Resource Names", <a href="http://tools.ietf.org/html/rfc1737">RFC 1737</a>, December 1994.
+
+   [<a name="ref-RFC1738" id="ref-RFC1738">RFC1738</a>]  Berners-Lee, T., Masinter, L., and M. McCahill, "Uniform
+              Resource Locators (URL)", <a href="http://tools.ietf.org/html/rfc1738">RFC 1738</a>, December 1994.
+
+   [<a name="ref-RFC1808" id="ref-RFC1808">RFC1808</a>]  Fielding, R., "Relative Uniform Resource Locators",
+              <a href="http://tools.ietf.org/html/rfc1808">RFC 1808</a>, June 1995.
+
+
+
+
+<span class="grey">Berners-Lee, et al.         Standards Track                    [Page 47]</span>
+<a name="page-48" id="page-48" href="#page-48"><span class="break"> </span></a>
+<span class="grey"><a href="http://tools.ietf.org/html/rfc3986">RFC 3986</a>                   URI Generic Syntax               January 2005</span>
+
+
+   [<a name="ref-RFC2046" id="ref-RFC2046">RFC2046</a>]  Freed, N. and N. Borenstein, "Multipurpose Internet Mail
+              Extensions (MIME) Part Two: Media Types", <a href="http://tools.ietf.org/html/rfc2046">RFC 2046</a>,
+              November 1996.
+
+   [<a name="ref-RFC2141" id="ref-RFC2141">RFC2141</a>]  Moats, R., "URN Syntax", <a href="http://tools.ietf.org/html/rfc2141">RFC 2141</a>, May 1997.
+
+   [<a name="ref-RFC2396" id="ref-RFC2396">RFC2396</a>]  Berners-Lee, T., Fielding, R., and L. Masinter, "Uniform
+              Resource Identifiers (URI): Generic Syntax", <a href="http://tools.ietf.org/html/rfc2396">RFC 2396</a>,
+              August 1998.
+
+   [<a name="ref-RFC2518" id="ref-RFC2518">RFC2518</a>]  Goland, Y., Whitehead, E., Faizi, A., Carter, S., and D.
+              Jensen, "HTTP Extensions for Distributed Authoring --
+              WEBDAV", <a href="http://tools.ietf.org/html/rfc2518">RFC 2518</a>, February 1999.
+
+   [<a name="ref-RFC2557" id="ref-RFC2557">RFC2557</a>]  Palme, J., Hopmann, A., and N. Shelness, "MIME
+              Encapsulation of Aggregate Documents, such as HTML
+              (MHTML)", <a href="http://tools.ietf.org/html/rfc2557">RFC 2557</a>, March 1999.
+
+   [<a name="ref-RFC2718" id="ref-RFC2718">RFC2718</a>]  Masinter, L., Alvestrand, H., Zigmond, D., and R. Petke,
+              "Guidelines for new URL Schemes", <a href="http://tools.ietf.org/html/rfc2718">RFC 2718</a>, November 1999.
+
+   [<a name="ref-RFC2732" id="ref-RFC2732">RFC2732</a>]  Hinden, R., Carpenter, B., and L. Masinter, "Format for
+              Literal IPv6 Addresses in URL's", <a href="http://tools.ietf.org/html/rfc2732">RFC 2732</a>, December 1999.
+
+   [<a name="ref-RFC3305" id="ref-RFC3305">RFC3305</a>]  Mealling, M. and R. Denenberg, "Report from the Joint
+              W3C/IETF URI Planning Interest Group: Uniform Resource
+              Identifiers (URIs), URLs, and Uniform Resource Names
+              (URNs): Clarifications and Recommendations", <a href="http://tools.ietf.org/html/rfc3305">RFC 3305</a>,
+              August 2002.
+
+   [<a name="ref-RFC3490" id="ref-RFC3490">RFC3490</a>]  Faltstrom, P., Hoffman, P., and A. Costello,
+              "Internationalizing Domain Names in Applications (IDNA)",
+              <a href="http://tools.ietf.org/html/rfc3490">RFC 3490</a>, March 2003.
+
+   [<a name="ref-RFC3513" id="ref-RFC3513">RFC3513</a>]  Hinden, R. and S. Deering, "Internet Protocol Version 6
+              (IPv6) Addressing Architecture", <a href="http://tools.ietf.org/html/rfc3513">RFC 3513</a>, April 2003.
+
+   [<a name="ref-Siedzik" id="ref-Siedzik">Siedzik</a>]  Siedzik, R., "Semantic Attacks: What's in a URL?",
+              April 2001, &lt;<a href="http://www.giac.org/practical/gsec/Richard_Siedzik_GSEC.pdf">http://www.giac.org/practical/gsec/</a>
+              <a href="http://www.giac.org/practical/gsec/Richard_Siedzik_GSEC.pdf">Richard_Siedzik_GSEC.pdf</a>&gt;.
+
+
+
+
+
+
+
+
+
+
+
+<span class="grey">Berners-Lee, et al.         Standards Track                    [Page 48]</span>
+<a name="page-49" id="page-49" href="#page-49"><span class="break"> </span></a>
+<span class="grey"><a href="http://tools.ietf.org/html/rfc3986">RFC 3986</a>                   URI Generic Syntax               January 2005</span>
+
+
+Appendix A.  Collected ABNF for URI
+
+   URI           = scheme ":" hier-part [ "?" query ] [ "#" fragment ]
+
+   hier-part     = "//" authority path-abempty
+                 / path-absolute
+                 / path-rootless
+                 / path-empty
+
+   URI-reference = URI / relative-ref
+
+   absolute-URI  = scheme ":" hier-part [ "?" query ]
+
+   relative-ref  = relative-part [ "?" query ] [ "#" fragment ]
+
+   relative-part = "//" authority path-abempty
+                 / path-absolute
+                 / path-noscheme
+                 / path-empty
+
+   scheme        = ALPHA *( ALPHA / DIGIT / "+" / "-" / "." )
+
+   authority     = [ userinfo "@" ] host [ ":" port ]
+   userinfo      = *( unreserved / pct-encoded / sub-delims / ":" )
+   host          = IP-literal / IPv4address / reg-name
+   port          = *DIGIT
+
+   IP-literal    = "[" ( IPv6address / IPvFuture  ) "]"
+
+   IPvFuture     = "v" 1*HEXDIG "." 1*( unreserved / sub-delims / ":" )
+
+   IPv6address   =                            6( h16 ":" ) ls32
+                 /                       "::" 5( h16 ":" ) ls32
+                 / [               h16 ] "::" 4( h16 ":" ) ls32
+                 / [ *1( h16 ":" ) h16 ] "::" 3( h16 ":" ) ls32
+                 / [ *2( h16 ":" ) h16 ] "::" 2( h16 ":" ) ls32
+                 / [ *3( h16 ":" ) h16 ] "::"    h16 ":"   ls32
+                 / [ *4( h16 ":" ) h16 ] "::"              ls32
+                 / [ *5( h16 ":" ) h16 ] "::"              h16
+                 / [ *6( h16 ":" ) h16 ] "::"
+
+   h16           = 1*4HEXDIG
+   ls32          = ( h16 ":" h16 ) / IPv4address
+   IPv4address   = dec-octet "." dec-octet "." dec-octet "." dec-octet
+
+
+
+
+
+
+
+<span class="grey">Berners-Lee, et al.         Standards Track                    [Page 49]</span>
+<a name="page-50" id="page-50" href="#page-50"><span class="break"> </span></a>
+<span class="grey"><a href="http://tools.ietf.org/html/rfc3986">RFC 3986</a>                   URI Generic Syntax               January 2005</span>
+
+
+   dec-octet     = DIGIT                 ; 0-9
+                 / %x31-39 DIGIT         ; 10-99
+                 / "1" 2DIGIT            ; 100-199
+                 / "2" %x30-34 DIGIT     ; 200-249
+                 / "25" %x30-35          ; 250-255
+
+   reg-name      = *( unreserved / pct-encoded / sub-delims )
+
+   path          = path-abempty    ; begins with "/" or is empty
+                 / path-absolute   ; begins with "/" but not "//"
+                 / path-noscheme   ; begins with a non-colon segment
+                 / path-rootless   ; begins with a segment
+                 / path-empty      ; zero characters
+
+   path-abempty  = *( "/" segment )
+   path-absolute = "/" [ segment-nz *( "/" segment ) ]
+   path-noscheme = segment-nz-nc *( "/" segment )
+   path-rootless = segment-nz *( "/" segment )
+   path-empty    = 0&lt;pchar&gt;
+
+   segment       = *pchar
+   segment-nz    = 1*pchar
+   segment-nz-nc = 1*( unreserved / pct-encoded / sub-delims / "@" )
+                 ; non-zero-length segment without any colon ":"
+
+   pchar         = unreserved / pct-encoded / sub-delims / ":" / "@"
+
+   query         = *( pchar / "/" / "?" )
+
+   fragment      = *( pchar / "/" / "?" )
+
+   pct-encoded   = "%" HEXDIG HEXDIG
+
+   unreserved    = ALPHA / DIGIT / "-" / "." / "_" / "~"
+   reserved      = gen-delims / sub-delims
+   gen-delims    = ":" / "/" / "?" / "#" / "[" / "]" / "@"
+   sub-delims    = "!" / "$" / "&amp;" / "'" / "(" / ")"
+                 / "*" / "+" / "," / ";" / "="
+
+Appendix B.  Parsing a URI Reference with a Regular Expression
+
+   As the "first-match-wins" algorithm is identical to the "greedy"
+   disambiguation method used by POSIX regular expressions, it is
+   natural and commonplace to use a regular expression for parsing the
+   potential five components of a URI reference.
+
+   The following line is the regular expression for breaking-down a
+   well-formed URI reference into its components.
+
+
+
+<span class="grey">Berners-Lee, et al.         Standards Track                    [Page 50]</span>
+<a name="page-51" id="page-51" href="#page-51"><span class="break"> </span></a>
+<span class="grey"><a href="http://tools.ietf.org/html/rfc3986">RFC 3986</a>                   URI Generic Syntax               January 2005</span>
+
+
+      ^(([^:/?#]+):)?(//([^/?#]*))?([^?#]*)(\?([^#]*))?(#(.*))?
+       12            3  4          5       6  7        8 9
+
+   The numbers in the second line above are only to assist readability;
+   they indicate the reference points for each subexpression (i.e., each
+   paired parenthesis).  We refer to the value matched for subexpression
+   &lt;n&gt; as $&lt;n&gt;.  For example, matching the above expression to
+
+      <a href="http://www.ics.uci.edu/pub/ietf/uri/#Related">http://www.ics.uci.edu/pub/ietf/uri/#Related</a>
+
+   results in the following subexpression matches:
+
+      $1 = http:
+      $2 = http
+      $3 = //www.ics.uci.edu
+      $4 = www.ics.uci.edu
+      $5 = /pub/ietf/uri/
+      $6 = &lt;undefined&gt;
+      $7 = &lt;undefined&gt;
+      $8 = #Related
+      $9 = Related
+
+   where &lt;undefined&gt; indicates that the component is not present, as is
+   the case for the query component in the above example.  Therefore, we
+   can determine the value of the five components as
+
+      scheme    = $2
+      authority = $4
+      path      = $5
+      query     = $7
+      fragment  = $9
+
+   Going in the opposite direction, we can recreate a URI reference from
+   its components by using the algorithm of <a href="#section-5.3">Section 5.3</a>.
+
+Appendix C.  Delimiting a URI in Context
+
+   URIs are often transmitted through formats that do not provide a
+   clear context for their interpretation.  For example, there are many
+   occasions when a URI is included in plain text; examples include text
+   sent in email, USENET news, and on printed paper.  In such cases, it
+   is important to be able to delimit the URI from the rest of the text,
+   and in particular from punctuation marks that might be mistaken for
+   part of the URI.
+
+   In practice, URIs are delimited in a variety of ways, but usually
+   within double-quotes "http://example.com/", angle brackets
+   &lt;http://example.com/&gt;, or just by using whitespace:
+
+
+
+<span class="grey">Berners-Lee, et al.         Standards Track                    [Page 51]</span>
+<a name="page-52" id="page-52" href="#page-52"><span class="break"> </span></a>
+<span class="grey"><a href="http://tools.ietf.org/html/rfc3986">RFC 3986</a>                   URI Generic Syntax               January 2005</span>
+
+
+      http://example.com/
+
+   These wrappers do not form part of the URI.
+
+   In some cases, extra whitespace (spaces, line-breaks, tabs, etc.) may
+   have to be added to break a long URI across lines.  The whitespace
+   should be ignored when the URI is extracted.
+
+   No whitespace should be introduced after a hyphen ("-") character.
+   Because some typesetters and printers may (erroneously) introduce a
+   hyphen at the end of line when breaking it, the interpreter of a URI
+   containing a line break immediately after a hyphen should ignore all
+   whitespace around the line break and should be aware that the hyphen
+   may or may not actually be part of the URI.
+
+   Using &lt;&gt; angle brackets around each URI is especially recommended as
+   a delimiting style for a reference that contains embedded whitespace.
+
+   The prefix "URL:" (with or without a trailing space) was formerly
+   recommended as a way to help distinguish a URI from other bracketed
+   designators, though it is not commonly used in practice and is no
+   longer recommended.
+
+   For robustness, software that accepts user-typed URI should attempt
+   to recognize and strip both delimiters and embedded whitespace.
+
+   For example, the text
+
+      Yes, Jim, I found it under "<a href="http://www.w3.org/Addressing/">http://www.w3.org/Addressing/</a>",
+      but you can probably pick it up from &lt;ftp://foo.example.
+      http://www.ics.uci.edu/pub/
+      <a href="http://www.ics.uci.edu/pub/ietf/uri/historical.html#WARNING">ietf/uri/historical.html#WARNING</a>&gt;.
+
+   contains the URI references
+
+      <a href="http://www.w3.org/Addressing/">http://www.w3.org/Addressing/</a>
+      ftp://foo.example.com/rfc/
+      <a href="http://www.ics.uci.edu/pub/ietf/uri/historical.html#WARNING">http://www.ics.uci.edu/pub/ietf/uri/historical.html#WARNING</a>
+
+
+
+
+
+
+
+
+
+
+
+
+
+<span class="grey">Berners-Lee, et al.         Standards Track                    [Page 52]</span>
+<a name="page-53" id="page-53" href="#page-53"><span class="break"> </span></a>
+<span class="grey"><a href="http://tools.ietf.org/html/rfc3986">RFC 3986</a>                   URI Generic Syntax               January 2005</span>
+
+
+Appendix D.  Changes from <a href="http://tools.ietf.org/html/rfc2396">RFC 2396</a>
+
+D.1.  Additions
+
+   An ABNF rule for URI has been introduced to correspond to one common
+   usage of the term: an absolute URI with optional fragment.
+
+   IPv6 (and later) literals have been added to the list of possible
+   identifiers for the host portion of an authority component, as
+   described by [<a href="http://tools.ietf.org/html/rfc2732" title="&quot;Format for Literal IPv6 Addresses in URL&amp;#39;s&quot;">RFC2732</a>], with the addition of "[" and "]" to the
+   reserved set and a version flag to anticipate future versions of IP
+   literals.  Square brackets are now specified as reserved within the
+   authority component and are not allowed outside their use as
+   delimiters for an IP literal within host.  In order to make this
+   change without changing the technical definition of the path, query,
+   and fragment components, those rules were redefined to directly
+   specify the characters allowed.
+
+   As [<a href="http://tools.ietf.org/html/rfc2732" title="&quot;Format for Literal IPv6 Addresses in URL&amp;#39;s&quot;">RFC2732</a>] defers to [<a href="http://tools.ietf.org/html/rfc3513" title="&quot;Internet Protocol Version 6 (IPv6) Addressing Architecture&quot;">RFC3513</a>] for definition of an IPv6 literal
+   address, which, unfortunately, lacks an ABNF description of
+   IPv6address, we created a new ABNF rule for IPv6address that matches
+   the text representations defined by <a href="#section-2.2">Section 2.2</a> of [<a href="http://tools.ietf.org/html/rfc3513" title="&quot;Internet Protocol Version 6 (IPv6) Addressing Architecture&quot;">RFC3513</a>].
+   Likewise, the definition of IPv4address has been improved in order to
+   limit each decimal octet to the range 0-255.
+
+   <a href="#section-6">Section 6</a>, on URI normalization and comparison, has been completely
+   rewritten and extended by using input from Tim Bray and discussion
+   within the W3C Technical Architecture Group.
+
+D.2.  Modifications
+
+   The ad-hoc BNF syntax of <a href="http://tools.ietf.org/html/rfc2396">RFC 2396</a> has been replaced with the ABNF of
+   [<a href="http://tools.ietf.org/html/rfc2234" title="&quot;Augmented BNF for Syntax Specifications: ABNF&quot;">RFC2234</a>].  This change required all rule names that formerly
+   included underscore characters to be renamed with a dash instead.  In
+   addition, a number of syntax rules have been eliminated or simplified
+   to make the overall grammar more comprehensible.  Specifications that
+   refer to the obsolete grammar rules may be understood by replacing
+   those rules according to the following table:
+
+
+
+
+
+
+
+
+
+
+
+
+
+<span class="grey">Berners-Lee, et al.         Standards Track                    [Page 53]</span>
+<a name="page-54" id="page-54" href="#page-54"><span class="break"> </span></a>
+<span class="grey"><a href="http://tools.ietf.org/html/rfc3986">RFC 3986</a>                   URI Generic Syntax               January 2005</span>
+
+
+   +----------------+--------------------------------------------------+
+   | obsolete rule  | translation                                      |
+   +----------------+--------------------------------------------------+
+   | absoluteURI    | absolute-URI                                     |
+   | relativeURI    | relative-part [ "?" query ]                      |
+   | hier_part      | ( "//" authority path-abempty /                  |
+   |                | path-absolute ) [ "?" query ]                    |
+   |                |                                                  |
+   | opaque_part    | path-rootless [ "?" query ]                      |
+   | net_path       | "//" authority path-abempty                      |
+   | abs_path       | path-absolute                                    |
+   | rel_path       | path-rootless                                    |
+   | rel_segment    | segment-nz-nc                                    |
+   | reg_name       | reg-name                                         |
+   | server         | authority                                        |
+   | hostport       | host [ ":" port ]                                |
+   | hostname       | reg-name                                         |
+   | path_segments  | path-abempty                                     |
+   | param          | *&lt;pchar excluding ";"&gt;                           |
+   |                |                                                  |
+   | uric           | unreserved / pct-encoded / ";" / "?" / ":"       |
+   |                |  / "@" / "&amp;" / "=" / "+" / "$" / "," / "/"       |
+   |                |                                                  |
+   | uric_no_slash  | unreserved / pct-encoded / ";" / "?" / ":"       |
+   |                |  / "@" / "&amp;" / "=" / "+" / "$" / ","             |
+   |                |                                                  |
+   | mark           | "-" / "_" / "." / "!" / "~" / "*" / "'"          |
+   |                |  / "(" / ")"                                     |
+   |                |                                                  |
+   | escaped        | pct-encoded                                      |
+   | hex            | HEXDIG                                           |
+   | alphanum       | ALPHA / DIGIT                                    |
+   +----------------+--------------------------------------------------+
+
+   Use of the above obsolete rules for the definition of scheme-specific
+   syntax is deprecated.
+
+   <a href="#section-2">Section 2</a>, on characters, has been rewritten to explain what
+   characters are reserved, when they are reserved, and why they are
+   reserved, even when they are not used as delimiters by the generic
+   syntax.  The mark characters that are typically unsafe to decode,
+   including the exclamation mark ("!"), asterisk ("*"), single-quote
+   ("'"), and open and close parentheses ("(" and ")"), have been moved
+   to the reserved set in order to clarify the distinction between
+   reserved and unreserved and, hopefully, to answer the most common
+   question of scheme designers.  Likewise, the section on
+   percent-encoded characters has been rewritten, and URI normalizers
+   are now given license to decode any percent-encoded octets
+
+
+
+<span class="grey">Berners-Lee, et al.         Standards Track                    [Page 54]</span>
+<a name="page-55" id="page-55" href="#page-55"><span class="break"> </span></a>
+<span class="grey"><a href="http://tools.ietf.org/html/rfc3986">RFC 3986</a>                   URI Generic Syntax               January 2005</span>
+
+
+   corresponding to unreserved characters.  In general, the terms
+   "escaped" and "unescaped" have been replaced with "percent-encoded"
+   and "decoded", respectively, to reduce confusion with other forms of
+   escape mechanisms.
+
+   The ABNF for URI and URI-reference has been redesigned to make them
+   more friendly to LALR parsers and to reduce complexity.  As a result,
+   the layout form of syntax description has been removed, along with
+   the uric, uric_no_slash, opaque_part, net_path, abs_path, rel_path,
+   path_segments, rel_segment, and mark rules.  All references to
+   "opaque" URIs have been replaced with a better description of how the
+   path component may be opaque to hierarchy.  The relativeURI rule has
+   been replaced with relative-ref to avoid unnecessary confusion over
+   whether they are a subset of URI.  The ambiguity regarding the
+   parsing of URI-reference as a URI or a relative-ref with a colon in
+   the first segment has been eliminated through the use of five
+   separate path matching rules.
+
+   The fragment identifier has been moved back into the section on
+   generic syntax components and within the URI and relative-ref rules,
+   though it remains excluded from absolute-URI.  The number sign ("#")
+   character has been moved back to the reserved set as a result of
+   reintegrating the fragment syntax.
+
+   The ABNF has been corrected to allow the path component to be empty.
+   This also allows an absolute-URI to consist of nothing after the
+   "scheme:", as is present in practice with the "dav:" namespace
+   [<a href="http://tools.ietf.org/html/rfc2518" title="&quot;HTTP Extensions for Distributed Authoring -- WEBDAV&quot;">RFC2518</a>] and with the "about:" scheme used internally by many WWW
+   browser implementations.  The ambiguity regarding the boundary
+   between authority and path has been eliminated through the use of
+   five separate path matching rules.
+
+   Registry-based naming authorities that use the generic syntax are now
+   defined within the host rule.  This change allows current
+   implementations, where whatever name provided is simply fed to the
+   local name resolution mechanism, to be consistent with the
+   specification.  It also removes the need to re-specify DNS name
+   formats here.  Furthermore, it allows the host component to contain
+   percent-encoded octets, which is necessary to enable
+   internationalized domain names to be provided in URIs, processed in
+   their native character encodings at the application layers above URI
+   processing, and passed to an IDNA library as a registered name in the
+   UTF-8 character encoding.  The server, hostport, hostname,
+   domainlabel, toplabel, and alphanum rules have been removed.
+
+   The resolving relative references algorithm of [<a href="http://tools.ietf.org/html/rfc2396" title="&quot;Uniform Resource Identifiers (URI): Generic Syntax&quot;">RFC2396</a>] has been
+   rewritten with pseudocode for this revision to improve clarity and
+   fix the following issues:
+
+
+
+<span class="grey">Berners-Lee, et al.         Standards Track                    [Page 55]</span>
+<a name="page-56" id="page-56" href="#page-56"><span class="break"> </span></a>
+<span class="grey"><a href="http://tools.ietf.org/html/rfc3986">RFC 3986</a>                   URI Generic Syntax               January 2005</span>
+
+
+   o  [<a href="http://tools.ietf.org/html/rfc2396" title="&quot;Uniform Resource Identifiers (URI): Generic Syntax&quot;">RFC2396</a>] <a href="#section-5.2">section 5.2</a>, step 6a, failed to account for a base URI
+      with no path.
+
+   o  Restored the behavior of [<a href="http://tools.ietf.org/html/rfc1808" title="&quot;Relative Uniform Resource Locators&quot;">RFC1808</a>] where, if the reference
+      contains an empty path and a defined query component, the target
+      URI inherits the base URI's path component.
+
+   o  The determination of whether a URI reference is a same-document
+      reference has been decoupled from the URI parser, simplifying the
+      URI processing interface within applications in a way consistent
+      with the internal architecture of deployed URI processing
+      implementations.  The determination is now based on comparison to
+      the base URI after transforming a reference to absolute form,
+      rather than on the format of the reference itself.  This change
+      may result in more references being considered "same-document"
+      under this specification than there would be under the rules given
+      in <a href="http://tools.ietf.org/html/rfc2396">RFC 2396</a>, especially when normalization is used to reduce
+      aliases.  However, it does not change the status of existing
+      same-document references.
+
+   o  Separated the path merge routine into two routines: merge, for
+      describing combination of the base URI path with a relative-path
+      reference, and remove_dot_segments, for describing how to remove
+      the special "." and ".." segments from a composed path.  The
+      remove_dot_segments algorithm is now applied to all URI reference
+      paths in order to match common implementations and to improve the
+      normalization of URIs in practice.  This change only impacts the
+      parsing of abnormal references and same-scheme references wherein
+      the base URI has a non-hierarchical path.
+
+Index
+
+   A
+      ABNF  11
+      absolute  27
+      absolute-path  26
+      absolute-URI  27
+      access  9
+      authority  17, 18
+
+   B
+      base URI  28
+
+   C
+      character encoding  4
+      character  4
+      characters  8, 11
+      coded character set  4
+
+
+
+<span class="grey">Berners-Lee, et al.         Standards Track                    [Page 56]</span>
+<a name="page-57" id="page-57" href="#page-57"><span class="break"> </span></a>
+<span class="grey"><a href="http://tools.ietf.org/html/rfc3986">RFC 3986</a>                   URI Generic Syntax               January 2005</span>
+
+
+   D
+      dec-octet  20
+      dereference  9
+      dot-segments  23
+
+   F
+      fragment  16, 24
+
+   G
+      gen-delims  13
+      generic syntax  6
+
+   H
+      h16  20
+      hier-part  16
+      hierarchical  10
+      host  18
+
+   I
+      identifier  5
+      IP-literal  19
+      IPv4  20
+      IPv4address  19, 20
+      IPv6  19
+      IPv6address  19, 20
+      IPvFuture  19
+
+   L
+      locator  7
+      ls32  20
+
+   M
+      merge  32
+
+   N
+      name  7
+      network-path  26
+
+   P
+      path  16, 22, 26
+         path-abempty  22
+         path-absolute  22
+         path-empty  22
+         path-noscheme  22
+         path-rootless  22
+      path-abempty  16, 22, 26
+      path-absolute  16, 22, 26
+      path-empty  16, 22, 26
+
+
+
+<span class="grey">Berners-Lee, et al.         Standards Track                    [Page 57]</span>
+<a name="page-58" id="page-58" href="#page-58"><span class="break"> </span></a>
+<span class="grey"><a href="http://tools.ietf.org/html/rfc3986">RFC 3986</a>                   URI Generic Syntax               January 2005</span>
+
+
+      path-rootless  16, 22
+      pchar  23
+      pct-encoded  12
+      percent-encoding  12
+      port  22
+
+   Q
+      query  16, 23
+
+   R
+      reg-name  21
+      registered name  20
+      relative  10, 28
+      relative-path  26
+      relative-ref  26
+      remove_dot_segments  33
+      representation  9
+      reserved  12
+      resolution  9, 28
+      resource  5
+      retrieval  9
+
+   S
+      same-document  27
+      sameness  9
+      scheme  16, 17
+      segment  22, 23
+         segment-nz  23
+         segment-nz-nc  23
+      sub-delims  13
+      suffix  27
+
+   T
+      transcription  8
+
+   U
+      uniform  4
+      unreserved  13
+      URI grammar
+         absolute-URI  27
+         ALPHA  11
+         authority  18
+         CR  11
+         dec-octet  20
+         DIGIT  11
+         DQUOTE  11
+         fragment  24
+         gen-delims  13
+
+
+
+<span class="grey">Berners-Lee, et al.         Standards Track                    [Page 58]</span>
+<a name="page-59" id="page-59" href="#page-59"><span class="break"> </span></a>
+<span class="grey"><a href="http://tools.ietf.org/html/rfc3986">RFC 3986</a>                   URI Generic Syntax               January 2005</span>
+
+
+         h16  20
+         HEXDIG  11
+         hier-part  16
+         host  19
+         IP-literal  19
+         IPv4address  20
+         IPv6address  20
+         IPvFuture  19
+         LF  11
+         ls32  20
+         OCTET  11
+         path  22
+         path-abempty  22
+         path-absolute  22
+         path-empty  22
+         path-noscheme  22
+         path-rootless  22
+         pchar  23
+         pct-encoded  12
+         port  22
+         query  24
+         reg-name  21
+         relative-ref  26
+         reserved  13
+         scheme  17
+         segment  23
+         segment-nz  23
+         segment-nz-nc  23
+         SP  11
+         sub-delims  13
+         unreserved  13
+         URI  16
+         URI-reference  25
+         userinfo  18
+      URI  16
+      URI-reference  25
+      URL  7
+      URN  7
+      userinfo  18
+
+
+
+
+
+
+
+
+
+
+
+
+<span class="grey">Berners-Lee, et al.         Standards Track                    [Page 59]</span>
+<a name="page-60" id="page-60" href="#page-60"><span class="break"> </span></a>
+<span class="grey"><a href="http://tools.ietf.org/html/rfc3986">RFC 3986</a>                   URI Generic Syntax               January 2005</span>
+
+
+Authors' Addresses
+
+   Tim Berners-Lee
+   World Wide Web Consortium
+   Massachusetts Institute of Technology
+   77 Massachusetts Avenue
+   Cambridge, MA  02139
+   USA
+
+   Phone: +1-617-253-5702
+   Fax:   +1-617-258-5999
+   EMail: timbl@w3.org
+   URI:   <a href="http://www.w3.org/People/Berners-Lee/">http://www.w3.org/People/Berners-Lee/</a>
+
+
+   Roy T. Fielding
+   Day Software
+   5251 California Ave., Suite 110
+   Irvine, CA  92617
+   USA
+
+   Phone: +1-949-679-2960
+   Fax:   +1-949-679-2972
+   EMail: fielding@gbiv.com
+   URI:   <a href="http://roy.gbiv.com/">http://roy.gbiv.com/</a>
+
+
+   Larry Masinter
+   Adobe Systems Incorporated
+   345 Park Ave
+   San Jose, CA  95110
+   USA
+
+   Phone: +1-408-536-3024
+   EMail: LMM@acm.org
+   URI:   <a href="http://larry.masinter.net/">http://larry.masinter.net/</a>
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+<span class="grey">Berners-Lee, et al.         Standards Track                    [Page 60]</span>
+<a name="page-61" id="page-61" href="#page-61"><span class="break"> </span></a>
+<span class="grey"><a href="http://tools.ietf.org/html/rfc3986">RFC 3986</a>                   URI Generic Syntax               January 2005</span>
+
+
+Full Copyright Statement
+
+   Copyright (C) The Internet Society (2005).
+
+   This document is subject to the rights, licenses and restrictions
+   contained in <a href="http://tools.ietf.org/html/bcp78">BCP 78</a>, and except as set forth therein, the authors
+   retain all their rights.
+
+   This document and the information contained herein are provided on an
+   "AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS
+   OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY AND THE INTERNET
+   ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS OR IMPLIED,
+   INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE
+   INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED
+   WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
+
+Intellectual Property
+
+   The IETF takes no position regarding the validity or scope of any
+   Intellectual Property Rights or other rights that might be claimed to
+   pertain to the implementation or use of the technology described in
+   this document or the extent to which any license under such rights
+   might or might not be available; nor does it represent that it has
+   made any independent effort to identify any such rights.  Information
+   on the IETF's procedures with respect to rights in IETF Documents can
+   be found in <a href="http://tools.ietf.org/html/bcp78">BCP 78</a> and <a href="http://tools.ietf.org/html/bcp79">BCP 79</a>.
+
+   Copies of IPR disclosures made to the IETF Secretariat and any
+   assurances of licenses to be made available, or the result of an
+   attempt made to obtain a general license or permission for the use of
+   such proprietary rights by implementers or users of this
+   specification can be obtained from the IETF on-line IPR repository at
+   <a href="http://www.ietf.org/ipr">http://www.ietf.org/ipr</a>.
+
+   The IETF invites any interested party to bring to its attention any
+   copyrights, patents or patent applications, or other proprietary
+   rights that may cover technology that may be required to implement
+   this standard.  Please address the information to the IETF at ietf-
+   ipr@ietf.org.
+
+
+Acknowledgement
+
+   Funding for the RFC Editor function is currently provided by the
+   Internet Society.
+
+
+
+
+
+
+Berners-Lee, et al.         Standards Track                    [Page 61]
+<span class="break"> </span>
+
+</pre><br>
+<span class="noprint"><small><small>Html markup produced by rfcmarkup 1.46, available from
+<a href="http://tools.ietf.org/tools/rfcmarkup/">http://tools.ietf.org/tools/rfcmarkup/</a>
+</small></small></span>
+
+</body></html>
\ No newline at end of file
diff -Nru /tmp/bxdedfLB6u/uriparser-0.6.0/doc/rule_dependencies.sh /tmp/fLjZ2dz9P3/uriparser-0.7.4/doc/rule_dependencies.sh
--- uriparser-0.6.0/doc/rule_dependencies.sh	2007-07-06 00:25:46.000000000 +0100
+++ uriparser-0.7.4/doc/rule_dependencies.sh	2008-12-20 18:52:47.000000000 +0000
@@ -1,3 +1,3 @@
-#!/bin/bash
-dot -Tsvg -orule_dependencies.svg rule_dependencies.dot
-dot -Tpng -orule_dependencies.png rule_dependencies.dot
+#!/bin/bash
+dot -Tsvg -orule_dependencies.svg rule_dependencies.dot
+dot -Tpng -orule_dependencies.png rule_dependencies.dot
diff -Nru /tmp/bxdedfLB6u/uriparser-0.6.0/include/uriparser/UriBase.h /tmp/fLjZ2dz9P3/uriparser-0.7.4/include/uriparser/UriBase.h
--- uriparser-0.6.0/include/uriparser/UriBase.h	2007-09-19 04:10:11.000000000 +0100
+++ uriparser-0.7.4/include/uriparser/UriBase.h	2008-12-22 23:54:34.000000000 +0000
@@ -54,8 +54,8 @@
 
 /* Version */
 #define URI_VER_MAJOR           0
-#define URI_VER_MINOR           6
-#define URI_VER_RELEASE         0
+#define URI_VER_MINOR           7
+#define URI_VER_RELEASE         4
 #define URI_VER_SUFFIX_ANSI     ""
 #define URI_VER_SUFFIX_UNICODE  URI_ANSI_TO_UNICODE(URI_VER_SUFFIX_ANSI)
 
@@ -105,21 +105,25 @@
 
 
 /* Shared errors */
-#define URI_SUCCESS                      0
-#define URI_ERROR_SYNTAX                 1 /* Parsed text violates expected format */
-#define URI_ERROR_NULL                   2 /* One of the params passed was NULL
-                                              although it mustn't be */
-#define URI_ERROR_MALLOC                 3 /* Requested memory could not be allocated */
+#define URI_SUCCESS                        0
+#define URI_ERROR_SYNTAX                   1 /* Parsed text violates expected format */
+#define URI_ERROR_NULL                     2 /* One of the params passed was NULL
+                                                although it mustn't be */
+#define URI_ERROR_MALLOC                   3 /* Requested memory could not be allocated */
+#define URI_ERROR_OUTPUT_TOO_LARGE         4 /* Some output is to large for the receiving buffer */
+#define URI_ERROR_NOT_IMPLEMENTED          8 /* The called function is not implemented yet */
+#define URI_ERROR_RANGE_INVALID            9 /* The parameters passed contained invalid ranges */
 
-/* Errors specific to ToSting */
-#define URI_ERROR_TOSTRING_TOO_LONG      4 /* URI too long for target buffer */
+
+/* Errors specific to ToString */
+#define URI_ERROR_TOSTRING_TOO_LONG        URI_ERROR_OUTPUT_TOO_LARGE /* Deprecated, test for URI_ERROR_OUTPUT_TOO_LARGE instead */
 
 /* Errors specific to AddBaseUri */
-#define URI_ERROR_ADDBASE_REL_BASE       5 /* Given base is not absolute */
+#define URI_ERROR_ADDBASE_REL_BASE         5 /* Given base is not absolute */
 
 /* Errors specific to RemoveBaseUri */
-#define URI_ERROR_REMOVEBASE_REL_BASE    6 /* Given base is not absolute */
-#define URI_ERROR_REMOVEBASE_REL_SOURCE  7 /* Given base is not absolute */
+#define URI_ERROR_REMOVEBASE_REL_BASE      6 /* Given base is not absolute */
+#define URI_ERROR_REMOVEBASE_REL_SOURCE    7 /* Given base is not absolute */
 
 
 
@@ -137,7 +141,7 @@
  */
 typedef struct UriIp4Struct {
 	unsigned char data[4]; /**< Each octet in one byte */
-} UriIp4;
+} UriIp4; /**< @copydoc UriIp4Struct */
 
 
 
@@ -146,7 +150,7 @@
  */
 typedef struct UriIp6Struct {
 	unsigned char data[16]; /**< Each quad in two bytes */
-} UriIp6;
+} UriIp6; /**< @copydoc UriIp6Struct */
 
 
 
@@ -154,14 +158,14 @@
  * Specifies a line break conversion mode
  */
 typedef enum UriBreakConversionEnum {
-	URI_BR_TO_LF,
-	URI_BR_TO_CRLF,
-	URI_BR_TO_CR,
-	URI_BR_TO_UNIX = URI_BR_TO_LF,
-	URI_BR_TO_WINDOWS = URI_BR_TO_CRLF,
-	URI_BR_TO_MAC = URI_BR_TO_CR,
-	URI_BR_DONT_TOUCH
-} UriBreakConversion;
+	URI_BR_TO_LF, /**< Convert to Unix line breaks ("\\x0a") */
+	URI_BR_TO_CRLF, /**< Convert to Windows line breaks ("\\x0d\\x0a") */
+	URI_BR_TO_CR, /**< Convert to Macintosh line breaks ("\\x0d") */
+	URI_BR_TO_UNIX = URI_BR_TO_LF, /**< @copydoc UriBreakConversionEnum::URI_BR_TO_LF */
+	URI_BR_TO_WINDOWS = URI_BR_TO_CRLF, /**< @copydoc UriBreakConversionEnum::URI_BR_TO_CRLF */
+	URI_BR_TO_MAC = URI_BR_TO_CR, /**< @copydoc UriBreakConversionEnum::URI_BR_TO_CR */
+	URI_BR_DONT_TOUCH /**< Copy line breaks unmodified */
+} UriBreakConversion; /**< @copydoc UriBreakConversionEnum */
 
 
 
@@ -169,14 +173,14 @@
  * Specifies which component of a %URI has to be normalized.
  */
 typedef enum UriNormalizationMaskEnum {
-	URI_NORMALIZED = 0,
-	URI_NORMALIZE_SCHEME = 1 << 0, /* Because of uppercase letters */
-	URI_NORMALIZE_USER_INFO = 1 << 1, /* .. uppercase percent-encodings */
-	URI_NORMALIZE_HOST = 1 << 2, /* .. uppercase letters */
-	URI_NORMALIZE_PATH = 1 << 3, /* .. uppercase percent-encodings or dot segments */
-	URI_NORMALIZE_QUERY = 1 << 4, /* .. uppercase percent-encodings */
-	URI_NORMALIZE_FRAGMENT = 1 << 5 /* .. uppercase percent-encodings */
-} UriNormalizationMask;
+	URI_NORMALIZED = 0, /**< Do not normalize anything */
+	URI_NORMALIZE_SCHEME = 1 << 0, /**< Normalize scheme (fix uppercase letters) */
+	URI_NORMALIZE_USER_INFO = 1 << 1, /**< Normalize user info (fix uppercase percent-encodings) */
+	URI_NORMALIZE_HOST = 1 << 2, /**< Normalize host (fix uppercase letters) */
+	URI_NORMALIZE_PATH = 1 << 3, /**< Normalize path (fix uppercase percent-encodings and redundant dot segments) */
+	URI_NORMALIZE_QUERY = 1 << 4, /**< Normalize query (fix uppercase percent-encodings) */
+	URI_NORMALIZE_FRAGMENT = 1 << 5 /**< Normalize fragment (fix uppercase percent-encodings) */
+} UriNormalizationMask; /**< @copydoc UriNormalizationMaskEnum */
 
 
 
diff -Nru /tmp/bxdedfLB6u/uriparser-0.6.0/include/uriparser/UriDefsAnsi.h /tmp/fLjZ2dz9P3/uriparser-0.7.4/include/uriparser/UriDefsAnsi.h
--- uriparser-0.6.0/include/uriparser/UriDefsAnsi.h	2007-07-27 06:37:42.000000000 +0100
+++ uriparser-0.7.4/include/uriparser/UriDefsAnsi.h	2008-12-20 18:52:47.000000000 +0000
@@ -73,6 +73,7 @@
 #undef URI_STRNCMP
 #define URI_STRNCMP strncmp
 
+/* TODO Remove on next source-compatibility break */
 #undef URI_SNPRINTF
 #if (defined(__WIN32__) || defined(_WIN32) || defined(WIN32))
 # define URI_SNPRINTF _snprintf
diff -Nru /tmp/bxdedfLB6u/uriparser-0.6.0/include/uriparser/UriDefsUnicode.h /tmp/fLjZ2dz9P3/uriparser-0.7.4/include/uriparser/UriDefsUnicode.h
--- uriparser-0.6.0/include/uriparser/UriDefsUnicode.h	2007-07-27 06:37:42.000000000 +0100
+++ uriparser-0.7.4/include/uriparser/UriDefsUnicode.h	2008-12-20 18:52:47.000000000 +0000
@@ -73,6 +73,7 @@
 #undef URI_STRNCMP
 #define URI_STRNCMP wcsncmp
 
+/* TODO Remove on next source-compatibility break */
 #undef URI_SNPRINTF
 #if (defined(__WIN32__) || defined(_WIN32) || defined(WIN32))
 # define URI_SNPRINTF _snwprintf
diff -Nru /tmp/bxdedfLB6u/uriparser-0.6.0/include/uriparser/Uri.h /tmp/fLjZ2dz9P3/uriparser-0.7.4/include/uriparser/Uri.h
--- uriparser-0.6.0/include/uriparser/Uri.h	2007-09-12 18:53:21.000000000 +0100
+++ uriparser-0.7.4/include/uriparser/Uri.h	2008-12-20 18:52:47.000000000 +0000
@@ -84,28 +84,36 @@
 
 /**
  * Specifies a range of characters within a string.
- * The range includes all characters from <code>first</code>
- * to one before <code>afterLast</code>. So if both are
+ * The range includes all characters from <c>first</c>
+ * to one before <c>afterLast</c>. So if both are
  * non-NULL the difference is the length of the text range.
+ *
+ * @see UriUriA
+ * @see UriPathSegmentA
+ * @see UriHostDataA
+ * @since 0.3.0
  */
 typedef struct URI_TYPE(TextRangeStruct) {
 	const URI_CHAR * first; /**< Pointer to first character */
 	const URI_CHAR * afterLast; /**< Pointer to character after the last one still in */
-} URI_TYPE(TextRange);
+} URI_TYPE(TextRange); /**< @copydoc UriTextRangeStructA */
 
 
 
 /**
- * Represents a segment within a %URI path.
+ * Represents a path segment within a %URI path.
  * More precisely it is a node in a linked
  * list of path segments.
+ *
+ * @see UriUriA
+ * @since 0.3.0
  */
 typedef struct URI_TYPE(PathSegmentStruct) {
 	URI_TYPE(TextRange) text; /**< Path segment name */
 	struct URI_TYPE(PathSegmentStruct) * next; /**< Pointer to the next path segment in the list, can be NULL if last already */
 
 	void * reserved; /**< Reserved to the parser */
-} URI_TYPE(PathSegment);
+} URI_TYPE(PathSegment); /**< @copydoc UriPathSegmentStructA */
 
 
 
@@ -114,18 +122,26 @@
  * This is either a IPv4, IPv6, plain
  * text for IPvFuture or all zero for
  * a registered name.
+ *
+ * @see UriUriA
+ * @since 0.3.0
  */
 typedef struct URI_TYPE(HostDataStruct) {
 	UriIp4 * ip4; /**< IPv4 address */
 	UriIp6 * ip6; /**< IPv6 address */
 	URI_TYPE(TextRange) ipFuture; /**< IPvFuture address */
-} URI_TYPE(HostData);
+} URI_TYPE(HostData); /**< @copydoc UriHostDataStructA */
 
 
 
 /**
  * Represents an RFC 3986 %URI.
  * Missing components can be {NULL, NULL} ranges.
+ *
+ * @see uriParseUriA
+ * @see uriFreeUriMembersA
+ * @see UriParserStateA
+ * @since 0.3.0
  */
 typedef struct URI_TYPE(UriStruct) {
 	URI_TYPE(TextRange) scheme; /**< Scheme (e.g. "http") */
@@ -137,11 +153,11 @@
 	URI_TYPE(PathSegment) * pathTail; /**< Tail of the list behind pathHead */
 	URI_TYPE(TextRange) query; /**< Query without leading "?" */
 	URI_TYPE(TextRange) fragment; /**< Query without leading "#" */
-	UriBool absolutePath; /**< Absolute path flag, meaningless if %URI is absolute */
+	UriBool absolutePath; /**< Absolute path flag, distincting "a" and "/a" */
 	UriBool owner; /**< Memory owner flag */
 
 	void * reserved; /**< Reserved to the parser */
-} URI_TYPE(Uri);
+} URI_TYPE(Uri); /**< @copydoc UriUriStructA */
 
 
 
@@ -149,6 +165,9 @@
  * Represents a state of the %URI parser.
  * Missing components can be NULL to reflect
  * a components absence.
+ *
+ * @see uriFreeUriMembersA
+ * @since 0.3.0
  */
 typedef struct URI_TYPE(ParserStateStruct) {
 	URI_TYPE(Uri) * uri; /**< Plug in the %URI structure to be filled while parsing here */
@@ -156,17 +175,37 @@
 	const URI_CHAR * errorPos; /**< Pointer to position in case of a syntax error */
 
 	void * reserved; /**< Reserved to the parser */
-} URI_TYPE(ParserState);
+} URI_TYPE(ParserState); /**< @copydoc UriParserStateStructA */
+
+
+
+/**
+ * Represents a query element.
+ * More precisely it is a node in a linked
+ * list of query elements.
+ *
+ * @since 0.7.0
+ */
+typedef struct URI_TYPE(QueryListStruct) {
+	const URI_CHAR * key; /**< Key of the query element */
+	const URI_CHAR * value; /**< Value of the query element, can be NULL */
+
+	struct URI_TYPE(QueryListStruct) * next; /**< Pointer to the next key/value pair in the list, can be NULL if last already */
+} URI_TYPE(QueryList); /**< @copydoc UriQueryListStructA */
 
 
 
 /**
  * Parses a RFC 3986 URI.
  *
- * @param state       Parser state with set output %URI, must not be NULL
- * @param first       Pointer to the first character to parse, must not be NULL
- * @param afterLast   Pointer to the character after the last to parse, must not be NULL
+ * @param state       <b>INOUT</b>: Parser state with set output %URI, must not be NULL
+ * @param first       <b>IN</b>: Pointer to the first character to parse, must not be NULL
+ * @param afterLast   <b>IN</b>: Pointer to the character after the last to parse, must not be NULL
  * @return            0 on success, error code otherwise
+ *
+ * @see uriParseUriA
+ * @see uriToStringA
+ * @since 0.3.0
  */
 int URI_FUNC(ParseUriEx)(URI_TYPE(ParserState) * state,
 		const URI_CHAR * first, const URI_CHAR * afterLast);
@@ -176,9 +215,13 @@
 /**
  * Parses a RFC 3986 %URI.
  *
- * @param state   Parser state with set output %URI, must not be NULL
- * @param text    Text to parse, must not be NULL
+ * @param state   <b>INOUT</b>: Parser state with set output %URI, must not be NULL
+ * @param text    <b>IN</b>: Text to parse, must not be NULL
  * @return        0 on success, error code otherwise
+ *
+ * @see uriParseUriExA
+ * @see uriToStringA
+ * @since 0.3.0
  */
 int URI_FUNC(ParseUri)(URI_TYPE(ParserState) * state,
 		const URI_CHAR * text);
@@ -190,7 +233,9 @@
  * of the %URI structure. Note that the structure
  * itself is not freed, only its members.
  *
- * @param uri   %URI structure whose members should be freed
+ * @param uri   <b>INOUT</b>: %URI structure whose members should be freed
+ *
+ * @since 0.3.0
  */
 void URI_FUNC(FreeUriMembers)(URI_TYPE(Uri) * uri);
 
@@ -201,15 +246,19 @@
  * writes the encoded version to the output string.
  * Be sure to allocate <b>3 times</b> the space of the input buffer for
  * the output buffer for <c>normalizeBreaks == URI_FALSE</c> and <b>6 times</b>
- * the space for <c>normalizeBreaks == URI_FALSE</c>
+ * the space for <c>normalizeBreaks == URI_TRUE</c>
  * (since e.g. "\x0d" becomes "%0D%0A" in that case)
  *
- * @param inFirst           Pointer to first character of the input text
- * @param inAfterLast       Pointer after the last character of the input text
- * @param out               Encoded text destination
- * @param spaceToPlus       Wether to convert ' ' to '+' or not
- * @param normalizeBreaks   Wether to convert CR and LF to CR-LF or not.
+ * @param inFirst           <b>IN</b>: Pointer to first character of the input text
+ * @param inAfterLast       <b>IN</b>: Pointer after the last character of the input text
+ * @param out               <b>OUT</b>: Encoded text destination
+ * @param spaceToPlus       <b>IN</b>: Wether to convert ' ' to '+' or not
+ * @param normalizeBreaks   <b>IN</b>: Wether to convert CR and LF to CR-LF or not.
  * @return                  Position of terminator in output string
+ *
+ * @see uriEscapeA
+ * @see uriUnescapeInPlaceExA
+ * @since 0.5.2
  */
 URI_CHAR * URI_FUNC(EscapeEx)(const URI_CHAR * inFirst,
 		const URI_CHAR * inAfterLast, URI_CHAR * out,
@@ -225,11 +274,15 @@
  * the space for <c>normalizeBreaks == URI_FALSE</c>
  * (since e.g. "\x0d" becomes "%0D%0A" in that case)
  *
- * @param in                Text source
- * @param out               Encoded text destination
- * @param spaceToPlus       Wether to convert ' ' to '+' or not
- * @param normalizeBreaks   Wether to convert CR and LF to CR-LF or not.
+ * @param in                <b>IN</b>: Text source
+ * @param out               <b>OUT</b>: Encoded text destination
+ * @param spaceToPlus       <b>IN</b>: Wether to convert ' ' to '+' or not
+ * @param normalizeBreaks   <b>IN</b>: Wether to convert CR and LF to CR-LF or not.
  * @return                  Position of terminator in output string
+ *
+ * @see uriEscapeExA
+ * @see uriUnescapeInPlaceA
+ * @since 0.5.0
  */
 URI_CHAR * URI_FUNC(Escape)(const URI_CHAR * in, URI_CHAR * out,
 		UriBool spaceToPlus, UriBool normalizeBreaks);
@@ -241,13 +294,17 @@
  * E.g. "%20" will become " ". Unescaping is done in place.
  * The return value will be point to the new position
  * of the terminating zero. Use this value to get the new
- * length of the string. NULL is only returned if <code>inout</code>
+ * length of the string. NULL is only returned if <c>inout</c>
  * is NULL.
  *
- * @param inout             Text to unescape/decode
- * @param plusToSpace       Whether to convert '+' to ' ' or not
- * @param breakConversion   Line break conversion mode
+ * @param inout             <b>INOUT</b>: Text to unescape/decode
+ * @param plusToSpace       <b>IN</b>: Whether to convert '+' to ' ' or not
+ * @param breakConversion   <b>IN</b>: Line break conversion mode
  * @return                  Pointer to new position of the terminating zero
+ *
+ * @see uriUnescapeInPlaceA
+ * @see uriEscapeExA
+ * @since 0.5.0
  */
 const URI_CHAR * URI_FUNC(UnescapeInPlaceEx)(URI_CHAR * inout,
 		UriBool plusToSpace, UriBreakConversion breakConversion);
@@ -259,14 +316,18 @@
  * E.g. "%20" will become " ". Unescaping is done in place.
  * The return value will be point to the new position
  * of the terminating zero. Use this value to get the new
- * length of the string. NULL is only returned if <code>inout</code>
+ * length of the string. NULL is only returned if <c>inout</c>
  * is NULL.
  *
  * NOTE: '+' is not decoded to ' ' and line breaks are not converted.
  * Use the more advanced UnescapeInPlaceEx for that features instead.
  *
- * @param inout   Text to unescape/decode
+ * @param inout   <b>INOUT</b>: Text to unescape/decode
  * @return        Pointer to new position of the terminating zero
+ *
+ * @see uriUnescapeInPlaceExA
+ * @see uriEscapeA
+ * @since 0.3.0
  */
 const URI_CHAR * URI_FUNC(UnescapeInPlace)(URI_CHAR * inout);
 
@@ -275,11 +336,15 @@
 /**
  * Performs reference resolution as described in
  * <a href="http://tools.ietf.org/html/rfc3986#section-5.2.2">section 5.2.2 of RFC 3986</a>.
+ * NOTE: On success you have to call uriFreeUriMembersA on \p absoluteDest manually later.
  *
- * @param absoluteDest     Result %URI
- * @param relativeSource   Reference to resolve
- * @param absoluteBase     Base %URI to apply
+ * @param absoluteDest     <b>OUT</b>: Result %URI
+ * @param relativeSource   <b>IN</b>: Reference to resolve
+ * @param absoluteBase     <b>IN</b>: Base %URI to apply
  * @return                 Error code or 0 on success
+ *
+ * @see uriRemoveBaseUriA
+ * @since 0.4.0
  */
 int URI_FUNC(AddBaseUri)(URI_TYPE(Uri) * absoluteDest,
 		const URI_TYPE(Uri) * relativeSource,
@@ -293,12 +358,17 @@
  * the absolute %URI shares scheme and authority with
  * the base %URI. If it does not the result will still be
  * an absolute URI (with scheme part if necessary).
+ * NOTE: On success you have to call uriFreeUriMembersA on
+ * \p dest manually later.
  *
- * @param dest             Result %URI
- * @param absoluteSource   Absolute %URI to make relative
- * @param absoluteBase     Base %URI
- * @param domainRootMode   Create %URI with path relative to domain root
+ * @param dest             <b>OUT</b>: Result %URI
+ * @param absoluteSource   <b>IN</b>: Absolute %URI to make relative
+ * @param absoluteBase     <b>IN</b>: Base %URI
+ * @param domainRootMode   <b>IN</b>: Create %URI with path relative to domain root
  * @return                 Error code or 0 on success
+ *
+ * @see uriAddBaseUriA
+ * @since 0.5.2
  */
 int URI_FUNC(RemoveBaseUri)(URI_TYPE(Uri) * dest,
 		const URI_TYPE(Uri) * absoluteSource,
@@ -310,11 +380,13 @@
 /**
  * Checks two URIs for equivalence. Comparison is done
  * the naive way, without prior normalization.
- * NOTE: Two <code>NULL</code> URIs are equal as well.
+ * NOTE: Two <c>NULL</c> URIs are equal as well.
+ *
+ * @param a   <b>IN</b>: First %URI
+ * @param b   <b>IN</b>: Second %URI
+ * @return    <c>URI_TRUE</c> when equal, <c>URI_FAlSE</c> else
  *
- * @param a   First %URI
- * @param b   Second %URI
- * @return    <code>URI_TRUE</code> when equal, <code>URI_FAlSE</code> else
+ * @since 0.4.0
  */
 UriBool URI_FUNC(EqualsUri)(const URI_TYPE(Uri) * a, const URI_TYPE(Uri) * b);
 
@@ -325,9 +397,12 @@
  * string representation of the given %URI excluding the
  * terminator.
  *
- * @param uri             %URI to measure
- * @param charsRequired   Length of the string representation in characters <b>excluding</b> terminator
+ * @param uri             <b>IN</b>: %URI to measure
+ * @param charsRequired   <b>OUT</b>: Length of the string representation in characters <b>excluding</b> terminator
  * @return                Error code or 0 on success
+ *
+ * @see uriToStringA
+ * @since 0.5.0
  */
 int URI_FUNC(ToStringCharsRequired)(const URI_TYPE(Uri) * uri,
 		int * charsRequired);
@@ -338,11 +413,14 @@
  * Converts a %URI structure back to text as described in
  * <a href="http://tools.ietf.org/html/rfc3986#section-5.3">section 5.3 of RFC 3986</a>.
  *
- * @param dest           Output destination
- * @param uri            %URI to convert
- * @param maxChars       Maximum number of characters to copy <b>including</b> terminator
- * @param charsWritten   Number of characters written, can be lower than maxChars even if the %URI is too long!
+ * @param dest           <b>OUT</b>: Output destination
+ * @param uri            <b>IN</b>: %URI to convert
+ * @param maxChars       <b>IN</b>: Maximum number of characters to copy <b>including</b> terminator
+ * @param charsWritten   <b>OUT</b>: Number of characters written, can be lower than maxChars even if the %URI is too long!
  * @return               Error code or 0 on success
+ *
+ * @see uriToStringCharsRequiredA
+ * @since 0.4.0
  */
 int URI_FUNC(ToString)(URI_CHAR * dest, const URI_TYPE(Uri) * uri, int maxChars, int * charsWritten);
 
@@ -351,8 +429,11 @@
 /**
  * Determines the components of a %URI that are not normalized.
  *
- * @param uri   %URI to check
+ * @param uri   <b>IN</b>: %URI to check
  * @return      Normalization job mask
+ *
+ * @see uriNormalizeSyntaxA
+ * @since 0.5.0
  */
 unsigned int URI_FUNC(NormalizeSyntaxMaskRequired)(const URI_TYPE(Uri) * uri);
 
@@ -365,9 +446,13 @@
  * NOTE: If necessary the %URI becomes owner of all memory
  * behind the text pointed to. Text is duplicated in that case.
  *
- * @param uri    %URI to normalize
- * @param mask   Normalization mask
+ * @param uri    <b>INOUT</b>: %URI to normalize
+ * @param mask   <b>IN</b>: Normalization mask
  * @return       Error code or 0 on success
+ *
+ * @see uriNormalizeSyntaxA
+ * @see uriNormalizeSyntaxMaskRequiredA
+ * @since 0.5.0
  */
 int URI_FUNC(NormalizeSyntaxEx)(URI_TYPE(Uri) * uri, unsigned int mask);
 
@@ -379,25 +464,34 @@
  * NOTE: If necessary the %URI becomes owner of all memory
  * behind the text pointed to. Text is duplicated in that case.
  *
- * @param uri   %URI to normalize
+ * @param uri   <b>INOUT</b>: %URI to normalize
  * @return      Error code or 0 on success
+ *
+ * @see uriNormalizeSyntaxExA
+ * @see uriNormalizeSyntaxMaskRequiredA
+ * @since 0.5.0
  */
 int URI_FUNC(NormalizeSyntax)(URI_TYPE(Uri) * uri);
 
 
 
 /**
- * Converts an absolute Unix filename to a %URI string.
- * The destination buffer must be large enough to hold
- * 7 + 3 * len(filename) + 1 characters.
+ * Converts a Unix filename to a %URI string.
+ * The destination buffer must be large enough to hold 7 + 3 * len(filename) + 1
+ * characters in case of an absolute filename or 3 * len(filename) + 1 in case
+ * of a relative filename.
  *
  * EXAMPLE
  *   Input:  "/bin/bash"
  *   Output: "file:///bin/bash"
  *
- * @param filename     Unix filename to convert
- * @param uriString    Destination to write %URI string to
+ * @param filename     <b>IN</b>: Unix filename to convert
+ * @param uriString    <b>OUT</b>: Destination to write %URI string to
  * @return             Error code or 0 on success
+ *
+ * @see uriUriStringToUnixFilenameA
+ * @see uriWindowsFilenameToUriStringA
+ * @since 0.5.2
  */
 int URI_FUNC(UnixFilenameToUriString)(const URI_CHAR * filename,
 		URI_CHAR * uriString);
@@ -405,17 +499,22 @@
 
 
 /**
- * Converts an absolute Windows filename to a %URI string.
- * The destination buffer must be large enough to hold
- * 8 + 3 * len(filename) + 1 characters.
+ * Converts a Windows filename to a %URI string.
+ * The destination buffer must be large enough to hold 8 + 3 * len(filename) + 1
+ * characters in case of an absolute filename or 3 * len(filename) + 1 in case
+ * of a relative filename.
  *
  * EXAMPLE
  *   Input:  "E:\\Documents and Settings"
  *   Output: "file:///E:/Documents%20and%20Settings"
  *
- * @param filename     Windows filename to convert
- * @param uriString    Destination to write %URI string to
+ * @param filename     <b>IN</b>: Windows filename to convert
+ * @param uriString    <b>OUT</b>: Destination to write %URI string to
  * @return             Error code or 0 on success
+ *
+ * @see uriUriStringToWindowsFilenameA
+ * @see uriUnixFilenameToUriStringA
+ * @since 0.5.2
  */
 int URI_FUNC(WindowsFilenameToUriString)(const URI_CHAR * filename,
 		URI_CHAR * uriString);
@@ -423,13 +522,18 @@
 
 
 /**
- * Extracts an absolute Unix filename from a %URI string.
- * The destination buffer must be large enough to hold
- * len(uriString) + 1 - 7 characters.
+ * Extracts a Unix filename from a %URI string.
+ * The destination buffer must be large enough to hold len(uriString) + 1 - 7
+ * characters in case of an absolute %URI or len(uriString) + 1 in case
+ * of a relative %URI.
  *
- * @param uriString    %URI string to convert
- * @param filename     Destination to write filename to
+ * @param uriString    <b>IN</b>: %URI string to convert
+ * @param filename     <b>OUT</b>: Destination to write filename to
  * @return             Error code or 0 on success
+ *
+ * @see uriUnixFilenameToUriStringA
+ * @see uriUriStringToWindowsFilenameA
+ * @since 0.5.2
  */
 int URI_FUNC(UriStringToUnixFilename)(const URI_CHAR * uriString,
 		URI_CHAR * filename);
@@ -437,19 +541,207 @@
 
 
 /**
- * Extracts an absolute Windows filename from a %URI string.
- * The destination buffer must be large enough to hold
- * len(uriString) + 1 - 8 characters.
+ * Extracts a Windows filename from a %URI string.
+ * The destination buffer must be large enough to hold len(uriString) + 1 - 8
+ * characters in case of an absolute %URI or len(uriString) + 1 in case
+ * of a relative %URI.
  *
- * @param uriString    %URI string to convert
- * @param filename     Destination to write filename to
+ * @param uriString    <b>IN</b>: %URI string to convert
+ * @param filename     <b>OUT</b>: Destination to write filename to
  * @return             Error code or 0 on success
+ *
+ * @see uriWindowsFilenameToUriStringA
+ * @see uriUriStringToUnixFilenameA
+ * @since 0.5.2
  */
 int URI_FUNC(UriStringToWindowsFilename)(const URI_CHAR * uriString,
 		URI_CHAR * filename);
 
 
 
+/**
+ * Calculates the number of characters needed to store the
+ * string representation of the given query list excluding the
+ * terminator. It is assumed that line breaks are will be
+ * normalized to "%0D%0A".
+ *
+ * @param queryList         <b>IN</b>: Query list to measure
+ * @param charsRequired     <b>OUT</b>: Length of the string representation in characters <b>excluding</b> terminator
+ * @return                  Error code or 0 on success
+ *
+ * @see uriComposeQueryCharsRequiredExA
+ * @see uriComposeQueryA
+ * @since 0.7.0
+ */
+int URI_FUNC(ComposeQueryCharsRequired)(const URI_TYPE(QueryList) * queryList,
+		int * charsRequired);
+
+
+
+/**
+ * Calculates the number of characters needed to store the
+ * string representation of the given query list excluding the
+ * terminator.
+ *
+ * @param queryList         <b>IN</b>: Query list to measure
+ * @param charsRequired     <b>OUT</b>: Length of the string representation in characters <b>excluding</b> terminator
+ * @param spaceToPlus       <b>IN</b>: Wether to convert ' ' to '+' or not
+ * @param normalizeBreaks   <b>IN</b>: Wether to convert CR and LF to CR-LF or not.
+ * @return                  Error code or 0 on success
+ *
+ * @see uriComposeQueryCharsRequiredA
+ * @see uriComposeQueryExA
+ * @since 0.7.0
+ */
+int URI_FUNC(ComposeQueryCharsRequiredEx)(const URI_TYPE(QueryList) * queryList,
+		int * charsRequired, UriBool spaceToPlus, UriBool normalizeBreaks);
+
+
+
+/**
+ * Converts a query list structure back to a query string.
+ * The composed string does not start with '?',
+ * on the way ' ' is converted to '+' and line breaks are
+ * normalized to "%0D%0A".
+ *
+ * @param dest              <b>OUT</b>: Output destination
+ * @param queryList         <b>IN</b>: Query list to convert
+ * @param maxChars          <b>IN</b>: Maximum number of characters to copy <b>including</b> terminator
+ * @param charsWritten      <b>OUT</b>: Number of characters written, can be lower than maxChars even if the query list is too long!
+ * @return                  Error code or 0 on success
+ *
+ * @see uriComposeQueryExA
+ * @see uriComposeQueryMallocA
+ * @see uriComposeQueryCharsRequiredA
+ * @see uriDissectQueryMallocA
+ * @since 0.7.0
+ */
+int URI_FUNC(ComposeQuery)(URI_CHAR * dest,
+		const URI_TYPE(QueryList) * queryList, int maxChars, int * charsWritten);
+
+
+
+/**
+ * Converts a query list structure back to a query string.
+ * The composed string does not start with '?'.
+ *
+ * @param dest              <b>OUT</b>: Output destination
+ * @param queryList         <b>IN</b>: Query list to convert
+ * @param maxChars          <b>IN</b>: Maximum number of characters to copy <b>including</b> terminator
+ * @param charsWritten      <b>OUT</b>: Number of characters written, can be lower than maxChars even if the query list is too long!
+ * @param spaceToPlus       <b>IN</b>: Wether to convert ' ' to '+' or not
+ * @param normalizeBreaks   <b>IN</b>: Wether to convert CR and LF to CR-LF or not.
+ * @return                  Error code or 0 on success
+ *
+ * @see uriComposeQueryA
+ * @see uriComposeQueryMallocExA
+ * @see uriComposeQueryCharsRequiredExA
+ * @see uriDissectQueryMallocExA
+ * @since 0.7.0
+ */
+int URI_FUNC(ComposeQueryEx)(URI_CHAR * dest,
+		const URI_TYPE(QueryList) * queryList, int maxChars, int * charsWritten,
+		UriBool spaceToPlus, UriBool normalizeBreaks);
+
+
+
+/**
+ * Converts a query list structure back to a query string.
+ * Memory for this string is allocated internally.
+ * The composed string does not start with '?',
+ * on the way ' ' is converted to '+' and line breaks are
+ * normalized to "%0D%0A".
+ *
+ * @param dest              <b>OUT</b>: Output destination
+ * @param queryList         <b>IN</b>: Query list to convert
+ * @return                  Error code or 0 on success
+ *
+ * @see uriComposeQueryMallocExA
+ * @see uriComposeQueryA
+ * @see uriDissectQueryMallocA
+ * @since 0.7.0
+ */
+int URI_FUNC(ComposeQueryMalloc)(URI_CHAR ** dest,
+		const URI_TYPE(QueryList) * queryList);
+
+
+
+/**
+ * Converts a query list structure back to a query string.
+ * Memory for this string is allocated internally.
+ * The composed string does not start with '?'.
+ *
+ * @param dest              <b>OUT</b>: Output destination
+ * @param queryList         <b>IN</b>: Query list to convert
+ * @param spaceToPlus       <b>IN</b>: Wether to convert ' ' to '+' or not
+ * @param normalizeBreaks   <b>IN</b>: Wether to convert CR and LF to CR-LF or not.
+ * @return                  Error code or 0 on success
+ *
+ * @see uriComposeQueryMallocA
+ * @see uriComposeQueryExA
+ * @see uriDissectQueryMallocExA
+ * @since 0.7.0
+ */
+int URI_FUNC(ComposeQueryMallocEx)(URI_CHAR ** dest,
+		const URI_TYPE(QueryList) * queryList,
+		UriBool spaceToPlus, UriBool normalizeBreaks);
+
+
+
+/**
+ * Constructs a query list from the raw query string of a given URI.
+ * On the way '+' is converted back to ' ', line breaks are not modified.
+ *
+ * @param dest              <b>OUT</b>: Output destination
+ * @param itemCount         <b>OUT</b>: Number of items found, can be NULL
+ * @param first             <b>IN</b>: Pointer to first character <b>after</b> '?'
+ * @param afterLast         <b>IN</b>: Pointer to character after the last one still in
+ * @return                  Error code or 0 on success
+ *
+ * @see uriDissectQueryMallocExA
+ * @see uriComposeQueryA
+ * @see uriFreeQueryListA
+ * @since 0.7.0
+ */
+int URI_FUNC(DissectQueryMalloc)(URI_TYPE(QueryList) ** dest, int * itemCount,
+		const URI_CHAR * first, const URI_CHAR * afterLast);
+
+
+
+/**
+ * Constructs a query list from the raw query string of a given URI.
+ *
+ * @param dest              <b>OUT</b>: Output destination
+ * @param itemCount         <b>OUT</b>: Number of items found, can be NULL
+ * @param first             <b>IN</b>: Pointer to first character <b>after</b> '?'
+ * @param afterLast         <b>IN</b>: Pointer to character after the last one still in
+ * @param plusToSpace       <b>IN</b>: Whether to convert '+' to ' ' or not
+ * @param breakConversion   <b>IN</b>: Line break conversion mode
+ * @return                  Error code or 0 on success
+ *
+ * @see uriDissectQueryMallocA
+ * @see uriComposeQueryExA
+ * @see uriFreeQueryListA
+ * @since 0.7.0
+ */
+int URI_FUNC(DissectQueryMallocEx)(URI_TYPE(QueryList) ** dest, int * itemCount,
+		const URI_CHAR * first, const URI_CHAR * afterLast,
+		UriBool plusToSpace, UriBreakConversion breakConversion);
+
+
+
+/**
+ * Frees all memory associated with the given query list.
+ * The structure itself is freed as well.
+ *
+ * @param queryList   <b>INOUT</b>: Query list to free
+ *
+ * @since 0.7.0
+ */
+void URI_FUNC(FreeQueryList)(URI_TYPE(QueryList) * queryList);
+
+
+
 #ifdef __cplusplus
 }
 #endif
diff -Nru /tmp/bxdedfLB6u/uriparser-0.6.0/install-sh /tmp/fLjZ2dz9P3/uriparser-0.7.4/install-sh
--- uriparser-0.6.0/install-sh	2007-07-06 00:26:55.000000000 +0100
+++ uriparser-0.7.4/install-sh	1970-01-01 01:00:00.000000000 +0100
@@ -1,507 +0,0 @@
-#!/bin/sh
-# install - install a program, script, or datafile
-
-scriptversion=2006-10-14.15
-
-# This originates from X11R5 (mit/util/scripts/install.sh), which was
-# later released in X11R6 (xc/config/util/install.sh) with the
-# following copyright and license.
-#
-# Copyright (C) 1994 X Consortium
-#
-# Permission is hereby granted, free of charge, to any person obtaining a copy
-# of this software and associated documentation files (the "Software"), to
-# deal in the Software without restriction, including without limitation the
-# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
-# sell copies of the Software, and to permit persons to whom the Software is
-# furnished to do so, subject to the following conditions:
-#
-# The above copyright notice and this permission notice shall be included in
-# all copies or substantial portions of the Software.
-#
-# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
-# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL THE
-# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
-# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC-
-# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
-#
-# Except as contained in this notice, the name of the X Consortium shall not
-# be used in advertising or otherwise to promote the sale, use or other deal-
-# ings in this Software without prior written authorization from the X Consor-
-# tium.
-#
-#
-# FSF changes to this file are in the public domain.
-#
-# Calling this script install-sh is preferred over install.sh, to prevent
-# `make' implicit rules from creating a file called install from it
-# when there is no Makefile.
-#
-# This script is compatible with the BSD install script, but was written
-# from scratch.
-
-nl='
-'
-IFS=" ""	$nl"
-
-# set DOITPROG to echo to test this script
-
-# Don't use :- since 4.3BSD and earlier shells don't like it.
-doit="${DOITPROG-}"
-if test -z "$doit"; then
-  doit_exec=exec
-else
-  doit_exec=$doit
-fi
-
-# Put in absolute file names if you don't have them in your path;
-# or use environment vars.
-
-mvprog="${MVPROG-mv}"
-cpprog="${CPPROG-cp}"
-chmodprog="${CHMODPROG-chmod}"
-chownprog="${CHOWNPROG-chown}"
-chgrpprog="${CHGRPPROG-chgrp}"
-stripprog="${STRIPPROG-strip}"
-rmprog="${RMPROG-rm}"
-mkdirprog="${MKDIRPROG-mkdir}"
-
-posix_glob=
-posix_mkdir=
-
-# Desired mode of installed file.
-mode=0755
-
-chmodcmd=$chmodprog
-chowncmd=
-chgrpcmd=
-stripcmd=
-rmcmd="$rmprog -f"
-mvcmd="$mvprog"
-src=
-dst=
-dir_arg=
-dstarg=
-no_target_directory=
-
-usage="Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE
-   or: $0 [OPTION]... SRCFILES... DIRECTORY
-   or: $0 [OPTION]... -t DIRECTORY SRCFILES...
-   or: $0 [OPTION]... -d DIRECTORIES...
-
-In the 1st form, copy SRCFILE to DSTFILE.
-In the 2nd and 3rd, copy all SRCFILES to DIRECTORY.
-In the 4th, create DIRECTORIES.
-
-Options:
--c         (ignored)
--d         create directories instead of installing files.
--g GROUP   $chgrpprog installed files to GROUP.
--m MODE    $chmodprog installed files to MODE.
--o USER    $chownprog installed files to USER.
--s         $stripprog installed files.
--t DIRECTORY  install into DIRECTORY.
--T         report an error if DSTFILE is a directory.
---help     display this help and exit.
---version  display version info and exit.
-
-Environment variables override the default commands:
-  CHGRPPROG CHMODPROG CHOWNPROG CPPROG MKDIRPROG MVPROG RMPROG STRIPPROG
-"
-
-while test $# -ne 0; do
-  case $1 in
-    -c) shift
-        continue;;
-
-    -d) dir_arg=true
-        shift
-        continue;;
-
-    -g) chgrpcmd="$chgrpprog $2"
-        shift
-        shift
-        continue;;
-
-    --help) echo "$usage"; exit $?;;
-
-    -m) mode=$2
-        shift
-        shift
-	case $mode in
-	  *' '* | *'	'* | *'
-'*	  | *'*'* | *'?'* | *'['*)
-	    echo "$0: invalid mode: $mode" >&2
-	    exit 1;;
-	esac
-        continue;;
-
-    -o) chowncmd="$chownprog $2"
-        shift
-        shift
-        continue;;
-
-    -s) stripcmd=$stripprog
-        shift
-        continue;;
-
-    -t) dstarg=$2
-	shift
-	shift
-	continue;;
-
-    -T) no_target_directory=true
-	shift
-	continue;;
-
-    --version) echo "$0 $scriptversion"; exit $?;;
-
-    --)	shift
-	break;;
-
-    -*)	echo "$0: invalid option: $1" >&2
-	exit 1;;
-
-    *)  break;;
-  esac
-done
-
-if test $# -ne 0 && test -z "$dir_arg$dstarg"; then
-  # When -d is used, all remaining arguments are directories to create.
-  # When -t is used, the destination is already specified.
-  # Otherwise, the last argument is the destination.  Remove it from $@.
-  for arg
-  do
-    if test -n "$dstarg"; then
-      # $@ is not empty: it contains at least $arg.
-      set fnord "$@" "$dstarg"
-      shift # fnord
-    fi
-    shift # arg
-    dstarg=$arg
-  done
-fi
-
-if test $# -eq 0; then
-  if test -z "$dir_arg"; then
-    echo "$0: no input file specified." >&2
-    exit 1
-  fi
-  # It's OK to call `install-sh -d' without argument.
-  # This can happen when creating conditional directories.
-  exit 0
-fi
-
-if test -z "$dir_arg"; then
-  trap '(exit $?); exit' 1 2 13 15
-
-  # Set umask so as not to create temps with too-generous modes.
-  # However, 'strip' requires both read and write access to temps.
-  case $mode in
-    # Optimize common cases.
-    *644) cp_umask=133;;
-    *755) cp_umask=22;;
-
-    *[0-7])
-      if test -z "$stripcmd"; then
-	u_plus_rw=
-      else
-	u_plus_rw='% 200'
-      fi
-      cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;;
-    *)
-      if test -z "$stripcmd"; then
-	u_plus_rw=
-      else
-	u_plus_rw=,u+rw
-      fi
-      cp_umask=$mode$u_plus_rw;;
-  esac
-fi
-
-for src
-do
-  # Protect names starting with `-'.
-  case $src in
-    -*) src=./$src ;;
-  esac
-
-  if test -n "$dir_arg"; then
-    dst=$src
-    dstdir=$dst
-    test -d "$dstdir"
-    dstdir_status=$?
-  else
-
-    # Waiting for this to be detected by the "$cpprog $src $dsttmp" command
-    # might cause directories to be created, which would be especially bad
-    # if $src (and thus $dsttmp) contains '*'.
-    if test ! -f "$src" && test ! -d "$src"; then
-      echo "$0: $src does not exist." >&2
-      exit 1
-    fi
-
-    if test -z "$dstarg"; then
-      echo "$0: no destination specified." >&2
-      exit 1
-    fi
-
-    dst=$dstarg
-    # Protect names starting with `-'.
-    case $dst in
-      -*) dst=./$dst ;;
-    esac
-
-    # If destination is a directory, append the input filename; won't work
-    # if double slashes aren't ignored.
-    if test -d "$dst"; then
-      if test -n "$no_target_directory"; then
-	echo "$0: $dstarg: Is a directory" >&2
-	exit 1
-      fi
-      dstdir=$dst
-      dst=$dstdir/`basename "$src"`
-      dstdir_status=0
-    else
-      # Prefer dirname, but fall back on a substitute if dirname fails.
-      dstdir=`
-	(dirname "$dst") 2>/dev/null ||
-	expr X"$dst" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-	     X"$dst" : 'X\(//\)[^/]' \| \
-	     X"$dst" : 'X\(//\)$' \| \
-	     X"$dst" : 'X\(/\)' \| . 2>/dev/null ||
-	echo X"$dst" |
-	    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
-		   s//\1/
-		   q
-		 }
-		 /^X\(\/\/\)[^/].*/{
-		   s//\1/
-		   q
-		 }
-		 /^X\(\/\/\)$/{
-		   s//\1/
-		   q
-		 }
-		 /^X\(\/\).*/{
-		   s//\1/
-		   q
-		 }
-		 s/.*/./; q'
-      `
-
-      test -d "$dstdir"
-      dstdir_status=$?
-    fi
-  fi
-
-  obsolete_mkdir_used=false
-
-  if test $dstdir_status != 0; then
-    case $posix_mkdir in
-      '')
-	# Create intermediate dirs using mode 755 as modified by the umask.
-	# This is like FreeBSD 'install' as of 1997-10-28.
-	umask=`umask`
-	case $stripcmd.$umask in
-	  # Optimize common cases.
-	  *[2367][2367]) mkdir_umask=$umask;;
-	  .*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;;
-
-	  *[0-7])
-	    mkdir_umask=`expr $umask + 22 \
-	      - $umask % 100 % 40 + $umask % 20 \
-	      - $umask % 10 % 4 + $umask % 2
-	    `;;
-	  *) mkdir_umask=$umask,go-w;;
-	esac
-
-	# With -d, create the new directory with the user-specified mode.
-	# Otherwise, rely on $mkdir_umask.
-	if test -n "$dir_arg"; then
-	  mkdir_mode=-m$mode
-	else
-	  mkdir_mode=
-	fi
-
-	posix_mkdir=false
-	case $umask in
-	  *[123567][0-7][0-7])
-	    # POSIX mkdir -p sets u+wx bits regardless of umask, which
-	    # is incompatible with FreeBSD 'install' when (umask & 300) != 0.
-	    ;;
-	  *)
-	    tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$
-	    trap 'ret=$?; rmdir "$tmpdir/d" "$tmpdir" 2>/dev/null; exit $ret' 0
-
-	    if (umask $mkdir_umask &&
-		exec $mkdirprog $mkdir_mode -p -- "$tmpdir/d") >/dev/null 2>&1
-	    then
-	      if test -z "$dir_arg" || {
-		   # Check for POSIX incompatibilities with -m.
-		   # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or
-		   # other-writeable bit of parent directory when it shouldn't.
-		   # FreeBSD 6.1 mkdir -m -p sets mode of existing directory.
-		   ls_ld_tmpdir=`ls -ld "$tmpdir"`
-		   case $ls_ld_tmpdir in
-		     d????-?r-*) different_mode=700;;
-		     d????-?--*) different_mode=755;;
-		     *) false;;
-		   esac &&
-		   $mkdirprog -m$different_mode -p -- "$tmpdir" && {
-		     ls_ld_tmpdir_1=`ls -ld "$tmpdir"`
-		     test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1"
-		   }
-		 }
-	      then posix_mkdir=:
-	      fi
-	      rmdir "$tmpdir/d" "$tmpdir"
-	    else
-	      # Remove any dirs left behind by ancient mkdir implementations.
-	      rmdir ./$mkdir_mode ./-p ./-- 2>/dev/null
-	    fi
-	    trap '' 0;;
-	esac;;
-    esac
-
-    if
-      $posix_mkdir && (
-	umask $mkdir_umask &&
-	$doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir"
-      )
-    then :
-    else
-
-      # The umask is ridiculous, or mkdir does not conform to POSIX,
-      # or it failed possibly due to a race condition.  Create the
-      # directory the slow way, step by step, checking for races as we go.
-
-      case $dstdir in
-	/*) prefix=/ ;;
-	-*) prefix=./ ;;
-	*)  prefix= ;;
-      esac
-
-      case $posix_glob in
-        '')
-	  if (set -f) 2>/dev/null; then
-	    posix_glob=true
-	  else
-	    posix_glob=false
-	  fi ;;
-      esac
-
-      oIFS=$IFS
-      IFS=/
-      $posix_glob && set -f
-      set fnord $dstdir
-      shift
-      $posix_glob && set +f
-      IFS=$oIFS
-
-      prefixes=
-
-      for d
-      do
-	test -z "$d" && continue
-
-	prefix=$prefix$d
-	if test -d "$prefix"; then
-	  prefixes=
-	else
-	  if $posix_mkdir; then
-	    (umask=$mkdir_umask &&
-	     $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break
-	    # Don't fail if two instances are running concurrently.
-	    test -d "$prefix" || exit 1
-	  else
-	    case $prefix in
-	      *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;;
-	      *) qprefix=$prefix;;
-	    esac
-	    prefixes="$prefixes '$qprefix'"
-	  fi
-	fi
-	prefix=$prefix/
-      done
-
-      if test -n "$prefixes"; then
-	# Don't fail if two instances are running concurrently.
-	(umask $mkdir_umask &&
-	 eval "\$doit_exec \$mkdirprog $prefixes") ||
-	  test -d "$dstdir" || exit 1
-	obsolete_mkdir_used=true
-      fi
-    fi
-  fi
-
-  if test -n "$dir_arg"; then
-    { test -z "$chowncmd" || $doit $chowncmd "$dst"; } &&
-    { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } &&
-    { test "$obsolete_mkdir_used$chowncmd$chgrpcmd" = false ||
-      test -z "$chmodcmd" || $doit $chmodcmd $mode "$dst"; } || exit 1
-  else
-
-    # Make a couple of temp file names in the proper directory.
-    dsttmp=$dstdir/_inst.$$_
-    rmtmp=$dstdir/_rm.$$_
-
-    # Trap to clean up those temp files at exit.
-    trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0
-
-    # Copy the file name to the temp name.
-    (umask $cp_umask && $doit_exec $cpprog "$src" "$dsttmp") &&
-
-    # and set any options; do chmod last to preserve setuid bits.
-    #
-    # If any of these fail, we abort the whole thing.  If we want to
-    # ignore errors from any of these, just make sure not to ignore
-    # errors from the above "$doit $cpprog $src $dsttmp" command.
-    #
-    { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } \
-      && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } \
-      && { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } \
-      && { test -z "$chmodcmd" || $doit $chmodcmd $mode "$dsttmp"; } &&
-
-    # Now rename the file to the real destination.
-    { $doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null \
-      || {
-	   # The rename failed, perhaps because mv can't rename something else
-	   # to itself, or perhaps because mv is so ancient that it does not
-	   # support -f.
-
-	   # Now remove or move aside any old file at destination location.
-	   # We try this two ways since rm can't unlink itself on some
-	   # systems and the destination file might be busy for other
-	   # reasons.  In this case, the final cleanup might fail but the new
-	   # file should still install successfully.
-	   {
-	     if test -f "$dst"; then
-	       $doit $rmcmd -f "$dst" 2>/dev/null \
-	       || { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null \
-		     && { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; }; }\
-	       || {
-		 echo "$0: cannot unlink or rename $dst" >&2
-		 (exit 1); exit 1
-	       }
-	     else
-	       :
-	     fi
-	   } &&
-
-	   # Now rename the file to the real destination.
-	   $doit $mvcmd "$dsttmp" "$dst"
-	 }
-    } || exit 1
-
-    trap '' 0
-  fi
-done
-
-# Local variables:
-# eval: (add-hook 'write-file-hooks 'time-stamp)
-# time-stamp-start: "scriptversion="
-# time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-end: "$"
-# End:
diff -Nru /tmp/bxdedfLB6u/uriparser-0.6.0/lib/UriCommon.c /tmp/fLjZ2dz9P3/uriparser-0.7.4/lib/UriCommon.c
--- uriparser-0.6.0/lib/UriCommon.c	2007-09-12 18:53:22.000000000 +0100
+++ uriparser-0.7.4/lib/UriCommon.c	2008-12-21 03:50:34.000000000 +0000
@@ -1,471 +1,527 @@
-/*
- * uriparser - RFC 3986 URI parsing library
- *
- * Copyright (C) 2007, Weijia Song <songweijia@gmail.com>
- * Copyright (C) 2007, Sebastian Pipping <webmaster@hartwork.org>
- * All rights reserved.
- *
- * Redistribution  and use in source and binary forms, with or without
- * modification,  are permitted provided that the following conditions
- * are met:
- *
- *     * Redistributions   of  source  code  must  retain  the   above
- *       copyright  notice, this list of conditions and the  following
- *       disclaimer.
- *
- *     * Redistributions  in  binary  form must  reproduce  the  above
- *       copyright  notice, this list of conditions and the  following
- *       disclaimer   in  the  documentation  and/or  other  materials
- *       provided with the distribution.
- *
- *     * Neither  the name of the <ORGANIZATION> nor the names of  its
- *       contributors  may  be  used to endorse  or  promote  products
- *       derived  from  this software without specific  prior  written
- *       permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS  IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT  NOT
- * LIMITED  TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND  FITNESS
- * FOR  A  PARTICULAR  PURPOSE ARE DISCLAIMED. IN NO EVENT  SHALL  THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL,    SPECIAL,   EXEMPLARY,   OR   CONSEQUENTIAL   DAMAGES
- * (INCLUDING,  BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES;  LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT  LIABILITY,  OR  TORT (INCLUDING  NEGLIGENCE  OR  OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-/* What encodings are enabled? */
-#include <uriparser/UriDefsConfig.h>
-#if (!defined(URI_PASS_ANSI) && !defined(URI_PASS_UNICODE))
-/* Include SELF twice */
-# define URI_PASS_ANSI 1
-# include "UriCommon.c"
-# undef URI_PASS_ANSI
-# define URI_PASS_UNICODE 1
-# include "UriCommon.c"
-# undef URI_PASS_UNICODE
-#else
-# ifdef URI_PASS_ANSI
-#  include <uriparser/UriDefsAnsi.h>
-# else
-#  include <uriparser/UriDefsUnicode.h>
-#  include <wchar.h>
-# endif
-
-
-
-#ifndef URI_DOXYGEN
-# include <uriparser/Uri.h>
-# include "UriCommon.h"
-#endif
-
-
-
-/*extern*/ const URI_CHAR * const URI_FUNC(SafeToPointTo) = _UT("X");
-/*extern*/ const URI_CHAR * const URI_FUNC(ConstPwd) = _UT(".");
-/*extern*/ const URI_CHAR * const URI_FUNC(ConstParent) = _UT("..");
-
-
-
-void URI_FUNC(ResetUri)(URI_TYPE(Uri) * uri) {
-	memset(uri, 0, sizeof(URI_TYPE(Uri)));
-}
-
-
-
-/* Properly removes "." and ".." path segments */
-UriBool URI_FUNC(RemoveDotSegments)(URI_TYPE(Uri) * uri) {
-	URI_TYPE(PathSegment) * walker;
-	if ((uri == NULL) || (uri->pathHead == NULL)) {
-		return URI_TRUE;
-	}
-
-	walker = uri->pathHead;
-	walker->reserved = NULL; /* Prev pointer */
-	do {
-		int len = (int)(walker->text.afterLast - walker->text.first);
-		switch (len) {
-		case 1:
-			if ((walker->text.first)[0] == _UT('.')) {
-				/* Path "." -> remove this segment */
-				URI_TYPE(PathSegment) * const prev = walker->reserved;
-				URI_TYPE(PathSegment) * const nextBackup = walker->next;
-
-				/* Last segment? */
-				if (walker->next != NULL) {
-					/* Not last segment */
-					walker->next->reserved = prev;
-
-					if (prev == NULL) {
-						/* First but not last segment */
-						uri->pathHead = walker->next;
-					} else {
-						/* Middle segment */
-						prev->next = walker->next;
-					}
-
-					if (uri->owner) {
-						free((URI_CHAR *)walker->text.first);
-					}
-					free(walker);
-				} else {
-					/* Last segment */
-					if (prev == NULL) {
-						/* Last and first */
-						if (uri->owner) {
-							free((URI_CHAR *)walker->text.first);
-						}
-						free(walker);
-
-						uri->pathHead = NULL;
-						uri->pathTail = NULL;
-					} else {
-						/* Last but not first, replace "." with empty segment to represent trailing slash */
-						if (uri->owner) {
-							free((URI_CHAR *)walker->text.first);
-						}
-						walker->text.first = URI_FUNC(SafeToPointTo);
-						walker->text.afterLast = URI_FUNC(SafeToPointTo);
-					}
-				}
-
-				walker = nextBackup;
-			} else {
-				if (walker->next != NULL) {
-					walker->next->reserved = walker;
-				} else {
-					/* Last segment -> update tail */
-					uri->pathTail = walker;
-				}
-				walker = walker->next;
-			}
-			break;
-
-		case 2:
-			if (((walker->text.first)[0] == _UT('.'))
-					&& ((walker->text.first)[1] == _UT('.'))) {
-				/* Path ".." -> remove this and the previous segment */
-				URI_TYPE(PathSegment) * const prev = walker->reserved;
-				URI_TYPE(PathSegment) * prevPrev;
-				URI_TYPE(PathSegment) * const nextBackup = walker->next;
-				if (prev != NULL) {
-					/* Not first segment */
-					prevPrev = prev->reserved;
-					if (prevPrev != NULL) {
-						/* Not even prev is the first one */
-						prevPrev->next = walker->next;
-						if (walker->next != NULL) {
-							walker->next->reserved = prevPrev;
-						} else {
-							/* Last segment -> insert "" segment to represent trailing slash, update tail */
-							URI_TYPE(PathSegment) * const segment = malloc(1 * sizeof(URI_TYPE(PathSegment)));
-							if (segment == NULL) {
-								if (uri->owner) {
-									free((URI_CHAR *)walker->text.first);
-								}
-								free(walker);
-
-								if (uri->owner) {
-									free((URI_CHAR *)prev->text.first);
-								}
-								free(prev);
-
-								return URI_FALSE; /* Raises malloc error */
-							}
-							memset(segment, 0, sizeof(URI_TYPE(PathSegment)));
-							segment->text.first = URI_FUNC(SafeToPointTo);
-							segment->text.afterLast = URI_FUNC(SafeToPointTo);
-							prevPrev->next = segment;
-							uri->pathTail = segment;
-						}
-
-						if (uri->owner) {
-							free((URI_CHAR *)walker->text.first);
-						}
-						free(walker);
-
-						if (uri->owner) {
-							free((URI_CHAR *)prev->text.first);
-						}
-						free(prev);
-
-						walker = nextBackup;
-					} else {
-						/* Prev is the first segment */
-						uri->pathHead = walker->next;
-						if (walker->next != NULL) {
-							walker->next->reserved = NULL;
-						} else {
-							/* Last segment -> update tail */
-							uri->pathTail = NULL;
-						}
-
-						if (uri->owner) {
-							free((URI_CHAR *)walker->text.first);
-						}
-						free(walker);
-
-						if (uri->owner) {
-							free((URI_CHAR *)prev->text.first);
-						}
-						free(prev);
-
-						walker = nextBackup;
-					}
-				} else {
-					URI_TYPE(PathSegment) * const nextBackup = walker->next;
-					/* First segment -> update head pointer */
-					uri->pathHead = walker->next;
-					if (walker->next != NULL) {
-						walker->next->reserved = NULL;
-					} else {
-						/* Last segment -> update tail */
-						uri->pathTail = NULL;
-					}
-
-					if (uri->owner) {
-						free((URI_CHAR *)walker->text.first);
-					}
-					free(walker);
-
-					walker = nextBackup;
-				}
-			} else {
-				if (walker->next != NULL) {
-					walker->next->reserved = walker;
-				} else {
-					/* Last segment -> update tail */
-					uri->pathTail = walker;
-				}
-				walker = walker->next;
-			}
-			break;
-
-		default:
-			if (walker->next != NULL) {
-				walker->next->reserved = walker;
-			} else {
-				/* Last segment -> update tail */
-				uri->pathTail = walker;
-			}
-			walker = walker->next;
-			break;
-
-		}
-	} while (walker != NULL);
-
-	/* Fix path if only one empty segment */
-	if ((uri->pathHead != NULL)
-			&& (uri->pathHead->next == NULL)
-			&& (uri->pathHead->text.first == uri->pathHead->text.afterLast)) {
-		free(uri->pathHead);
-		uri->pathHead = NULL;
-		uri->pathTail = NULL;
-	}
-
-	return URI_TRUE;
-}
-
-
-
-unsigned char URI_FUNC(HexdigToInt)(URI_CHAR hexdig) {
-	switch (hexdig) {
-	case _UT('0'):
-	case _UT('1'):
-	case _UT('2'):
-	case _UT('3'):
-	case _UT('4'):
-	case _UT('5'):
-	case _UT('6'):
-	case _UT('7'):
-	case _UT('8'):
-	case _UT('9'):
-		return (unsigned char)(9 + hexdig - _UT('9'));
-
-	case _UT('a'):
-	case _UT('b'):
-	case _UT('c'):
-	case _UT('d'):
-	case _UT('e'):
-	case _UT('f'):
-		return (unsigned char)(15 + hexdig - _UT('f'));
-
-	case _UT('A'):
-	case _UT('B'):
-	case _UT('C'):
-	case _UT('D'):
-	case _UT('E'):
-	case _UT('F'):
-		return (unsigned char)(15 + hexdig - _UT('F'));
-
-	default:
-		return 0;
-	}
-}
-
-
-
-URI_CHAR URI_FUNC(HexToLetter)(unsigned int value) {
-	switch (value) {
-	case  0: return _UT('0');
-	case  1: return _UT('1');
-	case  2: return _UT('2');
-	case  3: return _UT('3');
-	case  4: return _UT('4');
-	case  5: return _UT('5');
-	case  6: return _UT('6');
-	case  7: return _UT('7');
-	case  8: return _UT('8');
-	case  9: return _UT('9');
-
-	/* Uppercase recommended in section 2.1. of RFC 3986 *
-	 * http://tools.ietf.org/html/rfc3986#section-2.1    */
-	case 10: return _UT('A');
-	case 11: return _UT('B');
-	case 12: return _UT('C');
-	case 13: return _UT('D');
-	case 14: return _UT('E');
-	default: return _UT('F');
-	}
-}
-
-
-
-/* Checks if a URI has the host component set. */
-UriBool URI_FUNC(IsHostSet)(const URI_TYPE(Uri) * uri) {
-	return (uri != NULL)
-			&& ((uri->hostText.first != NULL)
-				|| (uri->hostData.ip4 != NULL)
-				|| (uri->hostData.ip6 != NULL)
-				|| (uri->hostData.ipFuture.first != NULL)
-			);
-}
-
-
-
-/* Copies the path segment list from one URI to another. */
-UriBool URI_FUNC(CopyPath)(URI_TYPE(Uri) * dest,
-		const URI_TYPE(Uri) * source) {
-	if (source->pathHead == NULL) {
-		/* No path component */
-		dest->pathHead = NULL;
-		dest->pathTail = NULL;
-	} else {
-		/* Copy list but not the text contained */
-		URI_TYPE(PathSegment) * sourceWalker = source->pathHead;
-		URI_TYPE(PathSegment) * destPrev = NULL;
-		do {
-			URI_TYPE(PathSegment) * cur = malloc(sizeof(URI_TYPE(PathSegment)));
-			if (cur == NULL) {
-				/* Fix broken list */
-				if (destPrev != NULL) {
-					destPrev->next = NULL;
-				}
-				return URI_FALSE; /* Raises malloc error */
-			}
-
-			/* From this functions usage we know that *
-			 * the dest URI cannot be uri->owner      */
-			cur->text = sourceWalker->text;
-			if (destPrev == NULL) {
-				/* First segment ever */
-				dest->pathHead = cur;
-			} else {
-				destPrev->next = cur;
-			}
-			destPrev = cur;
-			sourceWalker = sourceWalker->next;
-		} while (sourceWalker != NULL);
-		dest->pathTail = destPrev;
-		dest->pathTail->next = NULL;
-	}
-
-	dest->absolutePath = source->absolutePath;
-	return URI_TRUE;
-}
-
-
-
-/* Copies the authority part of an URI over to another. */
-UriBool URI_FUNC(CopyAuthority)(URI_TYPE(Uri) * dest,
-		const URI_TYPE(Uri) * source) {
-	/* From this functions usage we know that *
-	 * the dest URI cannot be uri->owner      */
-
-	/* Copy userInfo */
-	dest->userInfo = source->userInfo;
-
-	/* Copy hostText */
-	dest->hostText = source->hostText;
-
-	/* Copy hostData */
-	if (source->hostData.ip4 != NULL) {
-		dest->hostData.ip4 = malloc(sizeof(UriIp4));
-		if (dest->hostData.ip4 == NULL) {
-			return URI_FALSE; /* Raises malloc error */
-		}
-		*(dest->hostData.ip4) = *(source->hostData.ip4);
-		dest->hostData.ip6 = NULL;
-		dest->hostData.ipFuture.first = NULL;
-		dest->hostData.ipFuture.afterLast = NULL;
-	} else if (source->hostData.ip6 != NULL) {
-		dest->hostData.ip4 = NULL;
-		dest->hostData.ip6 = malloc(sizeof(UriIp6));
-		if (dest->hostData.ip6 == NULL) {
-			return URI_FALSE; /* Raises malloc error */
-		}
-		*(dest->hostData.ip6) = *(source->hostData.ip6);
-		dest->hostData.ipFuture.first = NULL;
-		dest->hostData.ipFuture.afterLast = NULL;
-	} else {
-		dest->hostData.ip4 = NULL;
-		dest->hostData.ip6 = NULL;
-		dest->hostData.ipFuture = source->hostData.ipFuture;
-	}
-
-	/* Copy portText */
-	dest->portText = source->portText;
-
-	return URI_TRUE;
-}
-
-
-
-UriBool URI_FUNC(FixAmbiguity)(URI_TYPE(Uri) * uri) {
-	URI_TYPE(PathSegment) * segment;
-
-	if (	/* Case 1: absolute path, empty first segment */
-			(uri->absolutePath
-			&& (uri->pathHead != NULL)
-			&& (uri->pathHead->text.afterLast == uri->pathHead->text.first))
-
-			/* Case 2: relative path, empty first and second segment */
-			|| (!uri->absolutePath
-			&& (uri->pathHead != NULL)
-			&& (uri->pathHead->next != NULL)
-			&& (uri->pathHead->text.afterLast == uri->pathHead->text.first)
-			&& (uri->pathHead->next->text.afterLast == uri->pathHead->next->text.first))) {
-		/* NOOP */
-	} else {
-		return URI_TRUE;
-	}
-
-	segment = malloc(1 * sizeof(URI_TYPE(PathSegment)));
-	if (segment == NULL) {
-		return URI_FALSE; /* Raises malloc error */
-	}
-
-	/* Insert "." segment in front */
-	segment->next = uri->pathHead;
-	segment->text.first = URI_FUNC(ConstPwd);
-	segment->text.afterLast = URI_FUNC(ConstPwd) + 1;
-	uri->pathHead = segment;
-	return URI_TRUE;
-}
-
-
-
-#endif
+/*
+ * uriparser - RFC 3986 URI parsing library
+ *
+ * Copyright (C) 2007, Weijia Song <songweijia@gmail.com>
+ * Copyright (C) 2007, Sebastian Pipping <webmaster@hartwork.org>
+ * All rights reserved.
+ *
+ * Redistribution  and use in source and binary forms, with or without
+ * modification,  are permitted provided that the following conditions
+ * are met:
+ *
+ *     * Redistributions   of  source  code  must  retain  the   above
+ *       copyright  notice, this list of conditions and the  following
+ *       disclaimer.
+ *
+ *     * Redistributions  in  binary  form must  reproduce  the  above
+ *       copyright  notice, this list of conditions and the  following
+ *       disclaimer   in  the  documentation  and/or  other  materials
+ *       provided with the distribution.
+ *
+ *     * Neither  the name of the <ORGANIZATION> nor the names of  its
+ *       contributors  may  be  used to endorse  or  promote  products
+ *       derived  from  this software without specific  prior  written
+ *       permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS  IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT  NOT
+ * LIMITED  TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND  FITNESS
+ * FOR  A  PARTICULAR  PURPOSE ARE DISCLAIMED. IN NO EVENT  SHALL  THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL,    SPECIAL,   EXEMPLARY,   OR   CONSEQUENTIAL   DAMAGES
+ * (INCLUDING,  BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES;  LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT  LIABILITY,  OR  TORT (INCLUDING  NEGLIGENCE  OR  OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/* What encodings are enabled? */
+#include <uriparser/UriDefsConfig.h>
+#if (!defined(URI_PASS_ANSI) && !defined(URI_PASS_UNICODE))
+/* Include SELF twice */
+# define URI_PASS_ANSI 1
+# include "UriCommon.c"
+# undef URI_PASS_ANSI
+# define URI_PASS_UNICODE 1
+# include "UriCommon.c"
+# undef URI_PASS_UNICODE
+#else
+# ifdef URI_PASS_ANSI
+#  include <uriparser/UriDefsAnsi.h>
+# else
+#  include <uriparser/UriDefsUnicode.h>
+#  include <wchar.h>
+# endif
+
+
+
+#ifndef URI_DOXYGEN
+# include <uriparser/Uri.h>
+# include "UriCommon.h"
+#endif
+
+
+
+/*extern*/ const URI_CHAR * const URI_FUNC(SafeToPointTo) = _UT("X");
+/*extern*/ const URI_CHAR * const URI_FUNC(ConstPwd) = _UT(".");
+/*extern*/ const URI_CHAR * const URI_FUNC(ConstParent) = _UT("..");
+
+
+
+void URI_FUNC(ResetUri)(URI_TYPE(Uri) * uri) {
+	memset(uri, 0, sizeof(URI_TYPE(Uri)));
+}
+
+
+
+/* Properly removes "." and ".." path segments */
+UriBool URI_FUNC(RemoveDotSegments)(URI_TYPE(Uri) * uri,
+		UriBool relative) {
+	if (uri == NULL) {
+		return URI_TRUE;
+	}
+	return URI_FUNC(RemoveDotSegmentsEx)(uri, relative, uri->owner);
+}
+
+
+
+UriBool URI_FUNC(RemoveDotSegmentsEx)(URI_TYPE(Uri) * uri,
+        UriBool relative, UriBool pathOwned) {
+	URI_TYPE(PathSegment) * walker;
+	if ((uri == NULL) || (uri->pathHead == NULL)) {
+		return URI_TRUE;
+	}
+
+	walker = uri->pathHead;
+	walker->reserved = NULL; /* Prev pointer */
+	do {
+		UriBool removeSegment = URI_FALSE;
+		int len = (int)(walker->text.afterLast - walker->text.first);
+		switch (len) {
+		case 1:
+			if ((walker->text.first)[0] == _UT('.')) {
+				/* "." segment -> remove if not essential */
+				URI_TYPE(PathSegment) * const prev = walker->reserved;
+				URI_TYPE(PathSegment) * const nextBackup = walker->next;
+
+				/* Is this dot segment essential? */
+				removeSegment = URI_TRUE;
+				if (relative && (walker == uri->pathHead) && (walker->next != NULL)) {
+					const URI_CHAR * ch = walker->next->text.first;
+					for (; ch < walker->next->text.afterLast; ch++) {
+						if (*ch == _UT(':')) {
+							removeSegment = URI_FALSE;
+							break;
+						}
+					}
+				}
+
+				if (removeSegment) {
+					/* Last segment? */
+					if (walker->next != NULL) {
+						/* Not last segment */
+						walker->next->reserved = prev;
+
+						if (prev == NULL) {
+							/* First but not last segment */
+							uri->pathHead = walker->next;
+						} else {
+							/* Middle segment */
+							prev->next = walker->next;
+						}
+
+						if (pathOwned && (walker->text.first != walker->text.afterLast)) {
+							free((URI_CHAR *)walker->text.first);
+						}
+						free(walker);
+					} else {
+						/* Last segment */
+						if (pathOwned && (walker->text.first != walker->text.afterLast)) {
+							free((URI_CHAR *)walker->text.first);
+						}
+
+						if (prev == NULL) {
+							/* Last and first */
+							if (URI_FUNC(IsHostSet)(uri)) {
+								/* Replace "." with empty segment to represent trailing slash */
+								walker->text.first = URI_FUNC(SafeToPointTo);
+								walker->text.afterLast = URI_FUNC(SafeToPointTo);
+							} else {
+								free(walker);
+
+								uri->pathHead = NULL;
+								uri->pathTail = NULL;
+							}
+						} else {
+							/* Last but not first, replace "." with empty segment to represent trailing slash */
+							walker->text.first = URI_FUNC(SafeToPointTo);
+							walker->text.afterLast = URI_FUNC(SafeToPointTo);
+						}
+					}
+
+					walker = nextBackup;
+				}
+			}
+			break;
+
+		case 2:
+			if (((walker->text.first)[0] == _UT('.'))
+					&& ((walker->text.first)[1] == _UT('.'))) {
+				/* Path ".." -> remove this and the previous segment */
+				URI_TYPE(PathSegment) * const prev = walker->reserved;
+				URI_TYPE(PathSegment) * prevPrev;
+				URI_TYPE(PathSegment) * const nextBackup = walker->next;
+
+				removeSegment = URI_TRUE;
+				if (relative) {
+					if (prev == NULL) {
+						removeSegment = URI_FALSE;
+					} else if ((prev != NULL)
+							&& ((prev->text.afterLast - prev->text.first) == 2)
+							&& ((prev->text.first)[0] == _UT('.'))
+							&& ((prev->text.first)[1] == _UT('.'))) {
+						removeSegment = URI_FALSE;
+					}
+				}
+
+				if (removeSegment) {
+					if (prev != NULL) {
+						/* Not first segment */
+						prevPrev = prev->reserved;
+						if (prevPrev != NULL) {
+							/* Not even prev is the first one */
+							prevPrev->next = walker->next;
+							if (walker->next != NULL) {
+								walker->next->reserved = prevPrev;
+							} else {
+								/* Last segment -> insert "" segment to represent trailing slash, update tail */
+								URI_TYPE(PathSegment) * const segment = malloc(1 * sizeof(URI_TYPE(PathSegment)));
+								if (segment == NULL) {
+									if (pathOwned && (walker->text.first != walker->text.afterLast)) {
+										free((URI_CHAR *)walker->text.first);
+									}
+									free(walker);
+
+									if (pathOwned && (prev->text.first != prev->text.afterLast)) {
+										free((URI_CHAR *)prev->text.first);
+									}
+									free(prev);
+
+									return URI_FALSE; /* Raises malloc error */
+								}
+								memset(segment, 0, sizeof(URI_TYPE(PathSegment)));
+								segment->text.first = URI_FUNC(SafeToPointTo);
+								segment->text.afterLast = URI_FUNC(SafeToPointTo);
+								prevPrev->next = segment;
+								uri->pathTail = segment;
+							}
+
+							if (pathOwned && (walker->text.first != walker->text.afterLast)) {
+								free((URI_CHAR *)walker->text.first);
+							}
+							free(walker);
+
+							if (pathOwned && (prev->text.first != prev->text.afterLast)) {
+								free((URI_CHAR *)prev->text.first);
+							}
+							free(prev);
+
+							walker = nextBackup;
+						} else {
+							/* Prev is the first segment */
+							if (walker->next != NULL) {
+								uri->pathHead = walker->next;
+								walker->next->reserved = NULL;
+
+								if (pathOwned && (walker->text.first != walker->text.afterLast)) {
+									free((URI_CHAR *)walker->text.first);
+								}
+								free(walker);
+							} else {
+								/* Re-use segment for "" path segment to represent trailing slash, update tail */
+								URI_TYPE(PathSegment) * const segment = walker;
+								if (pathOwned && (segment->text.first != segment->text.afterLast)) {
+									free((URI_CHAR *)segment->text.first);
+								}
+								segment->text.first = URI_FUNC(SafeToPointTo);
+								segment->text.afterLast = URI_FUNC(SafeToPointTo);
+								uri->pathHead = segment;
+								uri->pathTail = segment;
+							}
+
+							if (pathOwned && (prev->text.first != prev->text.afterLast)) {
+								free((URI_CHAR *)prev->text.first);
+							}
+							free(prev);
+
+							walker = nextBackup;
+						}
+					} else {
+						URI_TYPE(PathSegment) * const nextBackup = walker->next;
+						/* First segment -> update head pointer */
+						uri->pathHead = walker->next;
+						if (walker->next != NULL) {
+							walker->next->reserved = NULL;
+						} else {
+							/* Last segment -> update tail */
+							uri->pathTail = NULL;
+						}
+
+						if (pathOwned && (walker->text.first != walker->text.afterLast)) {
+							free((URI_CHAR *)walker->text.first);
+						}
+						free(walker);
+
+						walker = nextBackup;
+					}
+				}
+			}
+			break;
+
+		}
+
+		if (!removeSegment) {
+			if (walker->next != NULL) {
+				walker->next->reserved = walker;
+			} else {
+				/* Last segment -> update tail */
+				uri->pathTail = walker;
+			}
+			walker = walker->next;
+		}
+	} while (walker != NULL);
+
+	return URI_TRUE;
+}
+
+
+
+/* Properly removes "." and ".." path segments */
+UriBool URI_FUNC(RemoveDotSegmentsAbsolute)(URI_TYPE(Uri) * uri) {
+	const UriBool ABSOLUTE = URI_FALSE;
+	return URI_FUNC(RemoveDotSegments)(uri, ABSOLUTE);
+}
+
+
+
+unsigned char URI_FUNC(HexdigToInt)(URI_CHAR hexdig) {
+	switch (hexdig) {
+	case _UT('0'):
+	case _UT('1'):
+	case _UT('2'):
+	case _UT('3'):
+	case _UT('4'):
+	case _UT('5'):
+	case _UT('6'):
+	case _UT('7'):
+	case _UT('8'):
+	case _UT('9'):
+		return (unsigned char)(9 + hexdig - _UT('9'));
+
+	case _UT('a'):
+	case _UT('b'):
+	case _UT('c'):
+	case _UT('d'):
+	case _UT('e'):
+	case _UT('f'):
+		return (unsigned char)(15 + hexdig - _UT('f'));
+
+	case _UT('A'):
+	case _UT('B'):
+	case _UT('C'):
+	case _UT('D'):
+	case _UT('E'):
+	case _UT('F'):
+		return (unsigned char)(15 + hexdig - _UT('F'));
+
+	default:
+		return 0;
+	}
+}
+
+
+
+URI_CHAR URI_FUNC(HexToLetter)(unsigned int value) {
+	/* Uppercase recommended in section 2.1. of RFC 3986 *
+	 * http://tools.ietf.org/html/rfc3986#section-2.1    */
+	return URI_FUNC(HexToLetterEx)(value, URI_TRUE);
+}
+
+
+
+URI_CHAR URI_FUNC(HexToLetterEx)(unsigned int value, UriBool uppercase) {
+	switch (value) {
+	case  0: return _UT('0');
+	case  1: return _UT('1');
+	case  2: return _UT('2');
+	case  3: return _UT('3');
+	case  4: return _UT('4');
+	case  5: return _UT('5');
+	case  6: return _UT('6');
+	case  7: return _UT('7');
+	case  8: return _UT('8');
+	case  9: return _UT('9');
+
+	case 10: return (uppercase == URI_TRUE) ? _UT('A') : _UT('a');
+	case 11: return (uppercase == URI_TRUE) ? _UT('B') : _UT('b');
+	case 12: return (uppercase == URI_TRUE) ? _UT('C') : _UT('c');
+	case 13: return (uppercase == URI_TRUE) ? _UT('D') : _UT('d');
+	case 14: return (uppercase == URI_TRUE) ? _UT('E') : _UT('e');
+	default: return (uppercase == URI_TRUE) ? _UT('F') : _UT('f');
+	}
+}
+
+
+
+/* Checks if a URI has the host component set. */
+UriBool URI_FUNC(IsHostSet)(const URI_TYPE(Uri) * uri) {
+	return (uri != NULL)
+			&& ((uri->hostText.first != NULL)
+				|| (uri->hostData.ip4 != NULL)
+				|| (uri->hostData.ip6 != NULL)
+				|| (uri->hostData.ipFuture.first != NULL)
+			);
+}
+
+
+
+/* Copies the path segment list from one URI to another. */
+UriBool URI_FUNC(CopyPath)(URI_TYPE(Uri) * dest,
+		const URI_TYPE(Uri) * source) {
+	if (source->pathHead == NULL) {
+		/* No path component */
+		dest->pathHead = NULL;
+		dest->pathTail = NULL;
+	} else {
+		/* Copy list but not the text contained */
+		URI_TYPE(PathSegment) * sourceWalker = source->pathHead;
+		URI_TYPE(PathSegment) * destPrev = NULL;
+		do {
+			URI_TYPE(PathSegment) * cur = malloc(sizeof(URI_TYPE(PathSegment)));
+			if (cur == NULL) {
+				/* Fix broken list */
+				if (destPrev != NULL) {
+					destPrev->next = NULL;
+				}
+				return URI_FALSE; /* Raises malloc error */
+			}
+
+			/* From this functions usage we know that *
+			 * the dest URI cannot be uri->owner      */
+			cur->text = sourceWalker->text;
+			if (destPrev == NULL) {
+				/* First segment ever */
+				dest->pathHead = cur;
+			} else {
+				destPrev->next = cur;
+			}
+			destPrev = cur;
+			sourceWalker = sourceWalker->next;
+		} while (sourceWalker != NULL);
+		dest->pathTail = destPrev;
+		dest->pathTail->next = NULL;
+	}
+
+	dest->absolutePath = source->absolutePath;
+	return URI_TRUE;
+}
+
+
+
+/* Copies the authority part of an URI over to another. */
+UriBool URI_FUNC(CopyAuthority)(URI_TYPE(Uri) * dest,
+		const URI_TYPE(Uri) * source) {
+	/* From this functions usage we know that *
+	 * the dest URI cannot be uri->owner      */
+
+	/* Copy userInfo */
+	dest->userInfo = source->userInfo;
+
+	/* Copy hostText */
+	dest->hostText = source->hostText;
+
+	/* Copy hostData */
+	if (source->hostData.ip4 != NULL) {
+		dest->hostData.ip4 = malloc(sizeof(UriIp4));
+		if (dest->hostData.ip4 == NULL) {
+			return URI_FALSE; /* Raises malloc error */
+		}
+		*(dest->hostData.ip4) = *(source->hostData.ip4);
+		dest->hostData.ip6 = NULL;
+		dest->hostData.ipFuture.first = NULL;
+		dest->hostData.ipFuture.afterLast = NULL;
+	} else if (source->hostData.ip6 != NULL) {
+		dest->hostData.ip4 = NULL;
+		dest->hostData.ip6 = malloc(sizeof(UriIp6));
+		if (dest->hostData.ip6 == NULL) {
+			return URI_FALSE; /* Raises malloc error */
+		}
+		*(dest->hostData.ip6) = *(source->hostData.ip6);
+		dest->hostData.ipFuture.first = NULL;
+		dest->hostData.ipFuture.afterLast = NULL;
+	} else {
+		dest->hostData.ip4 = NULL;
+		dest->hostData.ip6 = NULL;
+		dest->hostData.ipFuture = source->hostData.ipFuture;
+	}
+
+	/* Copy portText */
+	dest->portText = source->portText;
+
+	return URI_TRUE;
+}
+
+
+
+UriBool URI_FUNC(FixAmbiguity)(URI_TYPE(Uri) * uri) {
+	URI_TYPE(PathSegment) * segment;
+
+	if (	/* Case 1: absolute path, empty first segment */
+			(uri->absolutePath
+			&& (uri->pathHead != NULL)
+			&& (uri->pathHead->text.afterLast == uri->pathHead->text.first))
+
+			/* Case 2: relative path, empty first and second segment */
+			|| (!uri->absolutePath
+			&& (uri->pathHead != NULL)
+			&& (uri->pathHead->next != NULL)
+			&& (uri->pathHead->text.afterLast == uri->pathHead->text.first)
+			&& (uri->pathHead->next->text.afterLast == uri->pathHead->next->text.first))) {
+		/* NOOP */
+	} else {
+		return URI_TRUE;
+	}
+
+	segment = malloc(1 * sizeof(URI_TYPE(PathSegment)));
+	if (segment == NULL) {
+		return URI_FALSE; /* Raises malloc error */
+	}
+
+	/* Insert "." segment in front */
+	segment->next = uri->pathHead;
+	segment->text.first = URI_FUNC(ConstPwd);
+	segment->text.afterLast = URI_FUNC(ConstPwd) + 1;
+	uri->pathHead = segment;
+	return URI_TRUE;
+}
+
+
+
+void URI_FUNC(FixEmptyTrailSegment)(URI_TYPE(Uri) * uri) {
+	/* Fix path if only one empty segment */
+	if (!uri->absolutePath
+			&& !URI_FUNC(IsHostSet)(uri)
+			&& (uri->pathHead != NULL)
+			&& (uri->pathHead->next == NULL)
+			&& (uri->pathHead->text.first == uri->pathHead->text.afterLast)) {
+		free(uri->pathHead);
+		uri->pathHead = NULL;
+		uri->pathTail = NULL;
+	}
+}
+
+
+
+#endif
diff -Nru /tmp/bxdedfLB6u/uriparser-0.6.0/lib/UriCommon.h /tmp/fLjZ2dz9P3/uriparser-0.7.4/lib/UriCommon.h
--- uriparser-0.6.0/lib/UriCommon.h	2007-09-12 18:53:22.000000000 +0100
+++ uriparser-0.7.4/lib/UriCommon.h	2008-12-20 18:52:47.000000000 +0000
@@ -1,92 +1,96 @@
-/*
- * uriparser - RFC 3986 URI parsing library
- *
- * Copyright (C) 2007, Weijia Song <songweijia@gmail.com>
- * Copyright (C) 2007, Sebastian Pipping <webmaster@hartwork.org>
- * All rights reserved.
- *
- * Redistribution  and use in source and binary forms, with or without
- * modification,  are permitted provided that the following conditions
- * are met:
- *
- *     * Redistributions   of  source  code  must  retain  the   above
- *       copyright  notice, this list of conditions and the  following
- *       disclaimer.
- *
- *     * Redistributions  in  binary  form must  reproduce  the  above
- *       copyright  notice, this list of conditions and the  following
- *       disclaimer   in  the  documentation  and/or  other  materials
- *       provided with the distribution.
- *
- *     * Neither  the name of the <ORGANIZATION> nor the names of  its
- *       contributors  may  be  used to endorse  or  promote  products
- *       derived  from  this software without specific  prior  written
- *       permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS  IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT  NOT
- * LIMITED  TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND  FITNESS
- * FOR  A  PARTICULAR  PURPOSE ARE DISCLAIMED. IN NO EVENT  SHALL  THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL,    SPECIAL,   EXEMPLARY,   OR   CONSEQUENTIAL   DAMAGES
- * (INCLUDING,  BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES;  LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT  LIABILITY,  OR  TORT (INCLUDING  NEGLIGENCE  OR  OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-#if (defined(URI_PASS_ANSI) && !defined(URI_COMMON_H_ANSI)) \
-	|| (defined(URI_PASS_UNICODE) && !defined(URI_COMMON_H_UNICODE)) \
-	|| (!defined(URI_PASS_ANSI) && !defined(URI_PASS_UNICODE))
-/* What encodings are enabled? */
-#include <uriparser/UriDefsConfig.h>
-#if (!defined(URI_PASS_ANSI) && !defined(URI_PASS_UNICODE))
-/* Include SELF twice */
-# define URI_PASS_ANSI 1
-# include "UriCommon.h"
-# undef URI_PASS_ANSI
-# define URI_PASS_UNICODE 1
-# include "UriCommon.h"
-# undef URI_PASS_UNICODE
-/* Only one pass for each encoding */
-#elif (defined(URI_PASS_ANSI) && !defined(URI_COMMON_H_ANSI) \
-	&& defined(URI_ENABLE_ANSI)) || (defined(URI_PASS_UNICODE) \
-	&& !defined(URI_COMMON_H_UNICODE) && defined(URI_ENABLE_UNICODE))
-# ifdef URI_PASS_ANSI
-#  define URI_COMMON_H_ANSI 1
-#  include <uriparser/UriDefsAnsi.h>
-# else
-#  define URI_COMMON_H_UNICODE 1
-#  include <uriparser/UriDefsUnicode.h>
-# endif
-
-
-
-/* Used to point to from empty path segments.
- * X.first and X.afterLast must be the same non-NULL value then. */
-extern const URI_CHAR * const URI_FUNC(SafeToPointTo);
-extern const URI_CHAR * const URI_FUNC(ConstPwd);
-extern const URI_CHAR * const URI_FUNC(ConstParent);
-
-
-
-void URI_FUNC(ResetUri)(URI_TYPE(Uri) * uri);
-
-UriBool URI_FUNC(RemoveDotSegments)(URI_TYPE(Uri) * uri);
-
-unsigned char URI_FUNC(HexdigToInt)(URI_CHAR hexdig);
-URI_CHAR URI_FUNC(HexToLetter)(unsigned int value);
-
-UriBool URI_FUNC(IsHostSet)(const URI_TYPE(Uri) * uri);
-
-UriBool URI_FUNC(CopyPath)(URI_TYPE(Uri) * dest, const URI_TYPE(Uri) * source);
-UriBool URI_FUNC(CopyAuthority)(URI_TYPE(Uri) * dest, const URI_TYPE(Uri) * source);
-
-UriBool URI_FUNC(FixAmbiguity)(URI_TYPE(Uri) * uri);
-
-
-
-#endif
-#endif
+/*
+ * uriparser - RFC 3986 URI parsing library
+ *
+ * Copyright (C) 2007, Weijia Song <songweijia@gmail.com>
+ * Copyright (C) 2007, Sebastian Pipping <webmaster@hartwork.org>
+ * All rights reserved.
+ *
+ * Redistribution  and use in source and binary forms, with or without
+ * modification,  are permitted provided that the following conditions
+ * are met:
+ *
+ *     * Redistributions   of  source  code  must  retain  the   above
+ *       copyright  notice, this list of conditions and the  following
+ *       disclaimer.
+ *
+ *     * Redistributions  in  binary  form must  reproduce  the  above
+ *       copyright  notice, this list of conditions and the  following
+ *       disclaimer   in  the  documentation  and/or  other  materials
+ *       provided with the distribution.
+ *
+ *     * Neither  the name of the <ORGANIZATION> nor the names of  its
+ *       contributors  may  be  used to endorse  or  promote  products
+ *       derived  from  this software without specific  prior  written
+ *       permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS  IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT  NOT
+ * LIMITED  TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND  FITNESS
+ * FOR  A  PARTICULAR  PURPOSE ARE DISCLAIMED. IN NO EVENT  SHALL  THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL,    SPECIAL,   EXEMPLARY,   OR   CONSEQUENTIAL   DAMAGES
+ * (INCLUDING,  BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES;  LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT  LIABILITY,  OR  TORT (INCLUDING  NEGLIGENCE  OR  OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#if (defined(URI_PASS_ANSI) && !defined(URI_COMMON_H_ANSI)) \
+	|| (defined(URI_PASS_UNICODE) && !defined(URI_COMMON_H_UNICODE)) \
+	|| (!defined(URI_PASS_ANSI) && !defined(URI_PASS_UNICODE))
+/* What encodings are enabled? */
+#include <uriparser/UriDefsConfig.h>
+#if (!defined(URI_PASS_ANSI) && !defined(URI_PASS_UNICODE))
+/* Include SELF twice */
+# define URI_PASS_ANSI 1
+# include "UriCommon.h"
+# undef URI_PASS_ANSI
+# define URI_PASS_UNICODE 1
+# include "UriCommon.h"
+# undef URI_PASS_UNICODE
+/* Only one pass for each encoding */
+#elif (defined(URI_PASS_ANSI) && !defined(URI_COMMON_H_ANSI) \
+	&& defined(URI_ENABLE_ANSI)) || (defined(URI_PASS_UNICODE) \
+	&& !defined(URI_COMMON_H_UNICODE) && defined(URI_ENABLE_UNICODE))
+# ifdef URI_PASS_ANSI
+#  define URI_COMMON_H_ANSI 1
+#  include <uriparser/UriDefsAnsi.h>
+# else
+#  define URI_COMMON_H_UNICODE 1
+#  include <uriparser/UriDefsUnicode.h>
+# endif
+
+
+
+/* Used to point to from empty path segments.
+ * X.first and X.afterLast must be the same non-NULL value then. */
+extern const URI_CHAR * const URI_FUNC(SafeToPointTo);
+extern const URI_CHAR * const URI_FUNC(ConstPwd);
+extern const URI_CHAR * const URI_FUNC(ConstParent);
+
+
+
+void URI_FUNC(ResetUri)(URI_TYPE(Uri) * uri);
+
+UriBool URI_FUNC(RemoveDotSegmentsAbsolute)(URI_TYPE(Uri) * uri);
+UriBool URI_FUNC(RemoveDotSegments)(URI_TYPE(Uri) * uri, UriBool relative);
+UriBool URI_FUNC(RemoveDotSegmentsEx)(URI_TYPE(Uri) * uri,
+        UriBool relative, UriBool pathOwned);
+
+unsigned char URI_FUNC(HexdigToInt)(URI_CHAR hexdig);
+URI_CHAR URI_FUNC(HexToLetter)(unsigned int value);
+URI_CHAR URI_FUNC(HexToLetterEx)(unsigned int value, UriBool uppercase);
+
+UriBool URI_FUNC(IsHostSet)(const URI_TYPE(Uri) * uri);
+
+UriBool URI_FUNC(CopyPath)(URI_TYPE(Uri) * dest, const URI_TYPE(Uri) * source);
+UriBool URI_FUNC(CopyAuthority)(URI_TYPE(Uri) * dest, const URI_TYPE(Uri) * source);
+
+UriBool URI_FUNC(FixAmbiguity)(URI_TYPE(Uri) * uri);
+void URI_FUNC(FixEmptyTrailSegment)(URI_TYPE(Uri) * uri);
+
+
+#endif
+#endif
diff -Nru /tmp/bxdedfLB6u/uriparser-0.6.0/lib/UriCompare.c /tmp/fLjZ2dz9P3/uriparser-0.7.4/lib/UriCompare.c
--- uriparser-0.6.0/lib/UriCompare.c	2007-07-27 06:37:43.000000000 +0100
+++ uriparser-0.7.4/lib/UriCompare.c	2008-12-20 18:52:47.000000000 +0000
@@ -1,191 +1,191 @@
-/*
- * uriparser - RFC 3986 URI parsing library
- *
- * Copyright (C) 2007, Weijia Song <songweijia@gmail.com>
- * Copyright (C) 2007, Sebastian Pipping <webmaster@hartwork.org>
- * All rights reserved.
- *
- * Redistribution  and use in source and binary forms, with or without
- * modification,  are permitted provided that the following conditions
- * are met:
- *
- *     * Redistributions   of  source  code  must  retain  the   above
- *       copyright  notice, this list of conditions and the  following
- *       disclaimer.
- *
- *     * Redistributions  in  binary  form must  reproduce  the  above
- *       copyright  notice, this list of conditions and the  following
- *       disclaimer   in  the  documentation  and/or  other  materials
- *       provided with the distribution.
- *
- *     * Neither  the name of the <ORGANIZATION> nor the names of  its
- *       contributors  may  be  used to endorse  or  promote  products
- *       derived  from  this software without specific  prior  written
- *       permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS  IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT  NOT
- * LIMITED  TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND  FITNESS
- * FOR  A  PARTICULAR  PURPOSE ARE DISCLAIMED. IN NO EVENT  SHALL  THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL,    SPECIAL,   EXEMPLARY,   OR   CONSEQUENTIAL   DAMAGES
- * (INCLUDING,  BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES;  LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT  LIABILITY,  OR  TORT (INCLUDING  NEGLIGENCE  OR  OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-/* What encodings are enabled? */
-#include <uriparser/UriDefsConfig.h>
-#if (!defined(URI_PASS_ANSI) && !defined(URI_PASS_UNICODE))
-/* Include SELF twice */
-# define URI_PASS_ANSI 1
-# include "UriCompare.c"
-# undef URI_PASS_ANSI
-# define URI_PASS_UNICODE 1
-# include "UriCompare.c"
-# undef URI_PASS_UNICODE
-#else
-# ifdef URI_PASS_ANSI
-#  include <uriparser/UriDefsAnsi.h>
-# else
-#  include <uriparser/UriDefsUnicode.h>
-#  include <wchar.h>
-# endif
-
-
-
-#ifndef URI_DOXYGEN
-# include <uriparser/Uri.h>
-# include <uriparser/UriIp4.h>
-# include "UriCommon.h"
-#endif
-
-
-
-static int URI_FUNC(CompareRange)(const URI_TYPE(TextRange) * a,
-		const URI_TYPE(TextRange) * b);
-
-
-
-/* Compares two text ranges for equal text content */
-static URI_INLINE int URI_FUNC(CompareRange)(const URI_TYPE(TextRange) * a,
-		const URI_TYPE(TextRange) * b) {
-	int diff;
-
-	/* NOTE: Both NULL means equal! */
-	if ((a == NULL) || (b == NULL)) {
-		return ((a == NULL) && (b == NULL)) ? URI_TRUE : URI_FALSE;
-	}
-
-	diff = ((int)(a->afterLast - a->first) - (int)(b->afterLast - b->first));
-	if (diff > 0) {
-		return 1;
-	} else if (diff < 0) {
-		return -1;
-	}
-
-	return URI_STRNCMP(a->first, b->first, (a->afterLast - a->first));
-}
-
-
-
-UriBool URI_FUNC(EqualsUri)(const URI_TYPE(Uri) * a,
-		const URI_TYPE(Uri) * b) {
-	/* NOTE: Both NULL means equal! */
-	if ((a == NULL) || (b == NULL)) {
-		return ((a == NULL) && (b == NULL)) ? URI_TRUE : URI_FALSE;
-	}
-
-	/* scheme */
-	if (URI_FUNC(CompareRange)(&(a->scheme), &(b->scheme))) {
-		return URI_FALSE;
-	}
-
-	/* absolutePath */
-	if ((a->scheme.first == NULL)&& (a->absolutePath != b->absolutePath)) {
-		return URI_FALSE;
-	}
-
-	/* userInfo */
-	if (URI_FUNC(CompareRange)(&(a->userInfo), &(b->userInfo))) {
-		return URI_FALSE;
-	}
-
-	/* Host */
-	if (((a->hostData.ip4 == NULL) != (b->hostData.ip4 == NULL))
-			|| ((a->hostData.ip6 == NULL) != (b->hostData.ip6 == NULL))
-			|| ((a->hostData.ipFuture.first == NULL)
-				!= (b->hostData.ipFuture.first == NULL))) {
-		return URI_FALSE;
-	}
-
-	if (a->hostData.ip4 != NULL) {
-		if (memcmp(a->hostData.ip4->data, b->hostData.ip4->data, 4)) {
-			return URI_FALSE;
-		}
-	}
-
-	if (a->hostData.ip6 != NULL) {
-		if (memcmp(a->hostData.ip6->data, b->hostData.ip6->data, 16)) {
-			return URI_FALSE;
-		}
-	}
-
-	if (a->hostData.ipFuture.first != NULL) {
-		if (URI_FUNC(CompareRange)(&(a->hostData.ipFuture), &(b->hostData.ipFuture))) {
-			return URI_FALSE;
-		}
-	}
-
-	if ((a->hostData.ip4 == NULL)
-			&& (a->hostData.ip6 == NULL)
-			&& (a->hostData.ipFuture.first == NULL)) {
-		if (URI_FUNC(CompareRange)(&(a->hostText), &(b->hostText))) {
-			return URI_FALSE;
-		}
-	}
-
-	/* portText */
-	if (URI_FUNC(CompareRange)(&(a->portText), &(b->portText))) {
-		return URI_FALSE;
-	}
-
-	/* Path */
-	if ((a->pathHead == NULL) != (b->pathHead == NULL)) {
-		return URI_FALSE;
-	}
-
-	if (a->pathHead != NULL) {
-		URI_TYPE(PathSegment) * walkA = a->pathHead;
-		URI_TYPE(PathSegment) * walkB = b->pathHead;
-		do {
-			if (URI_FUNC(CompareRange)(&(walkA->text), &(walkB->text))) {
-				return URI_FALSE;
-			}
-			if ((walkA->next == NULL) != (walkB->next == NULL)) {
-				return URI_FALSE;
-			}
-			walkA = walkA->next;
-			walkB = walkB->next;
-		} while (walkA != NULL);
-	}
-
-	/* query */
-	if (URI_FUNC(CompareRange)(&(a->query), &(b->query))) {
-		return URI_FALSE;
-	}
-
-	/* fragment */
-	if (URI_FUNC(CompareRange)(&(a->fragment), &(b->fragment))) {
-		return URI_FALSE;
-	}
-
-	return URI_TRUE; /* Equal*/
-}
-
-
-
-#endif
+/*
+ * uriparser - RFC 3986 URI parsing library
+ *
+ * Copyright (C) 2007, Weijia Song <songweijia@gmail.com>
+ * Copyright (C) 2007, Sebastian Pipping <webmaster@hartwork.org>
+ * All rights reserved.
+ *
+ * Redistribution  and use in source and binary forms, with or without
+ * modification,  are permitted provided that the following conditions
+ * are met:
+ *
+ *     * Redistributions   of  source  code  must  retain  the   above
+ *       copyright  notice, this list of conditions and the  following
+ *       disclaimer.
+ *
+ *     * Redistributions  in  binary  form must  reproduce  the  above
+ *       copyright  notice, this list of conditions and the  following
+ *       disclaimer   in  the  documentation  and/or  other  materials
+ *       provided with the distribution.
+ *
+ *     * Neither  the name of the <ORGANIZATION> nor the names of  its
+ *       contributors  may  be  used to endorse  or  promote  products
+ *       derived  from  this software without specific  prior  written
+ *       permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS  IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT  NOT
+ * LIMITED  TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND  FITNESS
+ * FOR  A  PARTICULAR  PURPOSE ARE DISCLAIMED. IN NO EVENT  SHALL  THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL,    SPECIAL,   EXEMPLARY,   OR   CONSEQUENTIAL   DAMAGES
+ * (INCLUDING,  BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES;  LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT  LIABILITY,  OR  TORT (INCLUDING  NEGLIGENCE  OR  OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/* What encodings are enabled? */
+#include <uriparser/UriDefsConfig.h>
+#if (!defined(URI_PASS_ANSI) && !defined(URI_PASS_UNICODE))
+/* Include SELF twice */
+# define URI_PASS_ANSI 1
+# include "UriCompare.c"
+# undef URI_PASS_ANSI
+# define URI_PASS_UNICODE 1
+# include "UriCompare.c"
+# undef URI_PASS_UNICODE
+#else
+# ifdef URI_PASS_ANSI
+#  include <uriparser/UriDefsAnsi.h>
+# else
+#  include <uriparser/UriDefsUnicode.h>
+#  include <wchar.h>
+# endif
+
+
+
+#ifndef URI_DOXYGEN
+# include <uriparser/Uri.h>
+# include <uriparser/UriIp4.h>
+# include "UriCommon.h"
+#endif
+
+
+
+static int URI_FUNC(CompareRange)(const URI_TYPE(TextRange) * a,
+		const URI_TYPE(TextRange) * b);
+
+
+
+/* Compares two text ranges for equal text content */
+static URI_INLINE int URI_FUNC(CompareRange)(const URI_TYPE(TextRange) * a,
+		const URI_TYPE(TextRange) * b) {
+	int diff;
+
+	/* NOTE: Both NULL means equal! */
+	if ((a == NULL) || (b == NULL)) {
+		return ((a == NULL) && (b == NULL)) ? URI_TRUE : URI_FALSE;
+	}
+
+	diff = ((int)(a->afterLast - a->first) - (int)(b->afterLast - b->first));
+	if (diff > 0) {
+		return 1;
+	} else if (diff < 0) {
+		return -1;
+	}
+
+	return URI_STRNCMP(a->first, b->first, (a->afterLast - a->first));
+}
+
+
+
+UriBool URI_FUNC(EqualsUri)(const URI_TYPE(Uri) * a,
+		const URI_TYPE(Uri) * b) {
+	/* NOTE: Both NULL means equal! */
+	if ((a == NULL) || (b == NULL)) {
+		return ((a == NULL) && (b == NULL)) ? URI_TRUE : URI_FALSE;
+	}
+
+	/* scheme */
+	if (URI_FUNC(CompareRange)(&(a->scheme), &(b->scheme))) {
+		return URI_FALSE;
+	}
+
+	/* absolutePath */
+	if ((a->scheme.first == NULL)&& (a->absolutePath != b->absolutePath)) {
+		return URI_FALSE;
+	}
+
+	/* userInfo */
+	if (URI_FUNC(CompareRange)(&(a->userInfo), &(b->userInfo))) {
+		return URI_FALSE;
+	}
+
+	/* Host */
+	if (((a->hostData.ip4 == NULL) != (b->hostData.ip4 == NULL))
+			|| ((a->hostData.ip6 == NULL) != (b->hostData.ip6 == NULL))
+			|| ((a->hostData.ipFuture.first == NULL)
+				!= (b->hostData.ipFuture.first == NULL))) {
+		return URI_FALSE;
+	}
+
+	if (a->hostData.ip4 != NULL) {
+		if (memcmp(a->hostData.ip4->data, b->hostData.ip4->data, 4)) {
+			return URI_FALSE;
+		}
+	}
+
+	if (a->hostData.ip6 != NULL) {
+		if (memcmp(a->hostData.ip6->data, b->hostData.ip6->data, 16)) {
+			return URI_FALSE;
+		}
+	}
+
+	if (a->hostData.ipFuture.first != NULL) {
+		if (URI_FUNC(CompareRange)(&(a->hostData.ipFuture), &(b->hostData.ipFuture))) {
+			return URI_FALSE;
+		}
+	}
+
+	if ((a->hostData.ip4 == NULL)
+			&& (a->hostData.ip6 == NULL)
+			&& (a->hostData.ipFuture.first == NULL)) {
+		if (URI_FUNC(CompareRange)(&(a->hostText), &(b->hostText))) {
+			return URI_FALSE;
+		}
+	}
+
+	/* portText */
+	if (URI_FUNC(CompareRange)(&(a->portText), &(b->portText))) {
+		return URI_FALSE;
+	}
+
+	/* Path */
+	if ((a->pathHead == NULL) != (b->pathHead == NULL)) {
+		return URI_FALSE;
+	}
+
+	if (a->pathHead != NULL) {
+		URI_TYPE(PathSegment) * walkA = a->pathHead;
+		URI_TYPE(PathSegment) * walkB = b->pathHead;
+		do {
+			if (URI_FUNC(CompareRange)(&(walkA->text), &(walkB->text))) {
+				return URI_FALSE;
+			}
+			if ((walkA->next == NULL) != (walkB->next == NULL)) {
+				return URI_FALSE;
+			}
+			walkA = walkA->next;
+			walkB = walkB->next;
+		} while (walkA != NULL);
+	}
+
+	/* query */
+	if (URI_FUNC(CompareRange)(&(a->query), &(b->query))) {
+		return URI_FALSE;
+	}
+
+	/* fragment */
+	if (URI_FUNC(CompareRange)(&(a->fragment), &(b->fragment))) {
+		return URI_FALSE;
+	}
+
+	return URI_TRUE; /* Equal*/
+}
+
+
+
+#endif
diff -Nru /tmp/bxdedfLB6u/uriparser-0.6.0/lib/UriEscape.c /tmp/fLjZ2dz9P3/uriparser-0.7.4/lib/UriEscape.c
--- uriparser-0.6.0/lib/UriEscape.c	2007-09-12 18:53:22.000000000 +0100
+++ uriparser-0.7.4/lib/UriEscape.c	2008-12-20 18:52:47.000000000 +0000
@@ -1,449 +1,449 @@
-/*
- * uriparser - RFC 3986 URI parsing library
- *
- * Copyright (C) 2007, Weijia Song <songweijia@gmail.com>
- * Copyright (C) 2007, Sebastian Pipping <webmaster@hartwork.org>
- * All rights reserved.
- *
- * Redistribution  and use in source and binary forms, with or without
- * modification,  are permitted provided that the following conditions
- * are met:
- *
- *     * Redistributions   of  source  code  must  retain  the   above
- *       copyright  notice, this list of conditions and the  following
- *       disclaimer.
- *
- *     * Redistributions  in  binary  form must  reproduce  the  above
- *       copyright  notice, this list of conditions and the  following
- *       disclaimer   in  the  documentation  and/or  other  materials
- *       provided with the distribution.
- *
- *     * Neither  the name of the <ORGANIZATION> nor the names of  its
- *       contributors  may  be  used to endorse  or  promote  products
- *       derived  from  this software without specific  prior  written
- *       permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS  IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT  NOT
- * LIMITED  TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND  FITNESS
- * FOR  A  PARTICULAR  PURPOSE ARE DISCLAIMED. IN NO EVENT  SHALL  THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL,    SPECIAL,   EXEMPLARY,   OR   CONSEQUENTIAL   DAMAGES
- * (INCLUDING,  BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES;  LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT  LIABILITY,  OR  TORT (INCLUDING  NEGLIGENCE  OR  OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-/* What encodings are enabled? */
-#include <uriparser/UriDefsConfig.h>
-#if (!defined(URI_PASS_ANSI) && !defined(URI_PASS_UNICODE))
-/* Include SELF twice */
-# define URI_PASS_ANSI 1
-# include "UriEscape.c"
-# undef URI_PASS_ANSI
-# define URI_PASS_UNICODE 1
-# include "UriEscape.c"
-# undef URI_PASS_UNICODE
-#else
-# ifdef URI_PASS_ANSI
-#  include <uriparser/UriDefsAnsi.h>
-# else
-#  include <uriparser/UriDefsUnicode.h>
-#  include <wchar.h>
-# endif
-
-
-
-#ifndef URI_DOXYGEN
-# include <uriparser/Uri.h>
-# include "UriCommon.h"
-#endif
-
-
-
-URI_CHAR * URI_FUNC(Escape)(const URI_CHAR * in, URI_CHAR * out,
-		UriBool spaceToPlus, UriBool normalizeBreaks) {
-	return URI_FUNC(EscapeEx)(in, NULL, out, spaceToPlus, normalizeBreaks);
-}
-
-
-
-URI_CHAR * URI_FUNC(EscapeEx)(const URI_CHAR * inFirst,
-		const URI_CHAR * inAfterLast, URI_CHAR * out,
-		UriBool spaceToPlus, UriBool normalizeBreaks) {
-	const URI_CHAR * read = inFirst;
-	URI_CHAR * write = out;
-	UriBool prevWasCr = URI_FALSE;
-	if ((out == NULL) || (inFirst == out)) {
-		return NULL;
-	} else if (inFirst == NULL) {
-		if (out != NULL) {
-			out[0] = _UT('\0');
-		}
-		return out;
-	}
-
-	for (;;) {
-		if ((inAfterLast != NULL) && (read >= inAfterLast)) {
-			write[0] = _UT('\0');
-			return write;
-		}
-
-		switch (read[0]) {
-		case _UT('\0'):
-			write[0] = _UT('\0');
-			return write;
-
-		case _UT(' '):
-			if (spaceToPlus) {
-				write[0] = _UT('+');
-				write++;
-			} else {
-				write[0] = _UT('%');
-				write[1] = _UT('2');
-				write[2] = _UT('0');
-				write += 3;
-			}
-			prevWasCr = URI_FALSE;
-			break;
-
-		case _UT('a'): /* ALPHA */
-		case _UT('A'):
-		case _UT('b'):
-		case _UT('B'):
-		case _UT('c'):
-		case _UT('C'):
-		case _UT('d'):
-		case _UT('D'):
-		case _UT('e'):
-		case _UT('E'):
-		case _UT('f'):
-		case _UT('F'):
-		case _UT('g'):
-		case _UT('G'):
-		case _UT('h'):
-		case _UT('H'):
-		case _UT('i'):
-		case _UT('I'):
-		case _UT('j'):
-		case _UT('J'):
-		case _UT('k'):
-		case _UT('K'):
-		case _UT('l'):
-		case _UT('L'):
-		case _UT('m'):
-		case _UT('M'):
-		case _UT('n'):
-		case _UT('N'):
-		case _UT('o'):
-		case _UT('O'):
-		case _UT('p'):
-		case _UT('P'):
-		case _UT('q'):
-		case _UT('Q'):
-		case _UT('r'):
-		case _UT('R'):
-		case _UT('s'):
-		case _UT('S'):
-		case _UT('t'):
-		case _UT('T'):
-		case _UT('u'):
-		case _UT('U'):
-		case _UT('v'):
-		case _UT('V'):
-		case _UT('w'):
-		case _UT('W'):
-		case _UT('x'):
-		case _UT('X'):
-		case _UT('y'):
-		case _UT('Y'):
-		case _UT('z'):
-		case _UT('Z'):
-		case _UT('0'): /* DIGIT */
-		case _UT('1'):
-		case _UT('2'):
-		case _UT('3'):
-		case _UT('4'):
-		case _UT('5'):
-		case _UT('6'):
-		case _UT('7'):
-		case _UT('8'):
-		case _UT('9'):
-		case _UT('-'): /* "-" / "." / "_" / "~" */
-		case _UT('.'):
-		case _UT('_'):
-		case _UT('~'):
-			/* Copy unmodified */
-			write[0] = read[0];
-			write++;
-
-			prevWasCr = URI_FALSE;
-			break;
-
-		case _UT('\x0a'):
-			if (normalizeBreaks) {
-				if (!prevWasCr) {
-					write[0] = _UT('%');
-					write[1] = _UT('0');
-					write[2] = _UT('D');
-					write[3] = _UT('%');
-					write[4] = _UT('0');
-					write[5] = _UT('A');
-					write += 6;
-				}
-			} else {
-				write[0] = _UT('%');
-				write[1] = _UT('0');
-				write[2] = _UT('A');
-				write += 3;
-			}
-			prevWasCr = URI_FALSE;
-			break;
-
-		case _UT('\x0d'):
-			if (normalizeBreaks) {
-				write[0] = _UT('%');
-				write[1] = _UT('0');
-				write[2] = _UT('D');
-				write[3] = _UT('%');
-				write[4] = _UT('0');
-				write[5] = _UT('A');
-				write += 6;
-			} else {
-				write[0] = _UT('%');
-				write[1] = _UT('0');
-				write[2] = _UT('D');
-				write += 3;
-			}
-			prevWasCr = URI_TRUE;
-			break;
-
-		default:
-			/* Percent encode */
-			{
-				const unsigned char code = (unsigned char)read[0];
-				write[0] = _UT('%');
-				write[1] = URI_FUNC(HexToLetter)(code >> 4);
-				write[2] = URI_FUNC(HexToLetter)(code & 0x0f);
-				write += 3;
-			}
-			prevWasCr = URI_FALSE;
-			break;
-		}
-
-		read++;
-	}
-}
-
-
-
-const URI_CHAR * URI_FUNC(UnescapeInPlace)(URI_CHAR * inout) {
-	return URI_FUNC(UnescapeInPlaceEx)(inout, URI_FALSE, URI_BR_DONT_TOUCH);
-}
-
-
-
-const URI_CHAR * URI_FUNC(UnescapeInPlaceEx)(URI_CHAR * inout,
-		UriBool plusToSpace, UriBreakConversion breakConversion) {
-	URI_CHAR * read = inout;
-	URI_CHAR * write = inout;
-	UriBool prevWasCr = URI_FALSE;
-
-	if (inout == NULL) {
-		return NULL;
-	}
-
-	for (;;) {
-		switch (read[0]) {
-		case _UT('\0'):
-			if (read > write) {
-				write[0] = _UT('\0');
-			}
-			return write;
-
-		case _UT('%'):
-			switch (read[1]) {
-			case _UT('0'):
-			case _UT('1'):
-			case _UT('2'):
-			case _UT('3'):
-			case _UT('4'):
-			case _UT('5'):
-			case _UT('6'):
-			case _UT('7'):
-			case _UT('8'):
-			case _UT('9'):
-			case _UT('a'):
-			case _UT('b'):
-			case _UT('c'):
-			case _UT('d'):
-			case _UT('e'):
-			case _UT('f'):
-			case _UT('A'):
-			case _UT('B'):
-			case _UT('C'):
-			case _UT('D'):
-			case _UT('E'):
-			case _UT('F'):
-				switch (read[2]) {
-				case _UT('0'):
-				case _UT('1'):
-				case _UT('2'):
-				case _UT('3'):
-				case _UT('4'):
-				case _UT('5'):
-				case _UT('6'):
-				case _UT('7'):
-				case _UT('8'):
-				case _UT('9'):
-				case _UT('a'):
-				case _UT('b'):
-				case _UT('c'):
-				case _UT('d'):
-				case _UT('e'):
-				case _UT('f'):
-				case _UT('A'):
-				case _UT('B'):
-				case _UT('C'):
-				case _UT('D'):
-				case _UT('E'):
-				case _UT('F'):
-					{
-						/* Percent group found */
-						const unsigned char left = URI_FUNC(HexdigToInt)(read[1]);
-						const unsigned char right = URI_FUNC(HexdigToInt)(read[2]);
-						const int code = 16 * left + right;
-						switch (code) {
-						case 10:
-							switch (breakConversion) {
-							case URI_BR_TO_LF:
-								if (!prevWasCr) {
-									write[0] = (URI_CHAR)10;
-									write++;
-								}
-								break;
-
-							case URI_BR_TO_CRLF:
-								if (!prevWasCr) {
-									write[0] = (URI_CHAR)13;
-									write[1] = (URI_CHAR)10;
-									write += 2;
-								}
-								break;
-
-							case URI_BR_TO_CR:
-								if (!prevWasCr) {
-									write[0] = (URI_CHAR)13;
-									write++;
-								}
-								break;
-
-							case URI_BR_DONT_TOUCH:
-							default:
-								write[0] = (URI_CHAR)10;
-								write++;
-
-							}
-							prevWasCr = URI_FALSE;
-							break;
-
-						case 13:
-							switch (breakConversion) {
-							case URI_BR_TO_LF:
-								write[0] = (URI_CHAR)10;
-								write++;
-								break;
-
-							case URI_BR_TO_CRLF:
-								write[0] = (URI_CHAR)13;
-								write[1] = (URI_CHAR)10;
-								write += 2;
-								break;
-
-							case URI_BR_TO_CR:
-								write[0] = (URI_CHAR)13;
-								write++;
-								break;
-
-							case URI_BR_DONT_TOUCH:
-							default:
-								write[0] = (URI_CHAR)13;
-								write++;
-
-							}
-							prevWasCr = URI_TRUE;
-							break;
-
-						default:
-							write[0] = (URI_CHAR)(code);
-							write++;
-
-							prevWasCr = URI_FALSE;
-
-						}
-						read += 3;
-					}
-					break;
-
-				default:
-					/* Copy two chars unmodified and */
-					/* look at this char again */
-					if (read > write) {
-						write[0] = read[0];
-						write[1] = read[1];
-					}
-					read += 2;
-					write += 2;
-
-					prevWasCr = URI_FALSE;
-				}
-				break;
-
-			default:
-				/* Copy one char unmodified and */
-				/* look at this char again */
-				if (read > write) {
-					write[0] = read[0];
-				}
-				read++;
-				write++;
-
-				prevWasCr = URI_FALSE;
-			}
-			break;
-
-		case _UT('+'):
-			if (plusToSpace) {
-				/* Convert '+' to ' ' */
-				write[0] = _UT(' ');
-			} else {
-				/* Copy one char unmodified */
-				if (read > write) {
-					write[0] = read[0];
-				}
-			}
-			read++;
-			write++;
-
-			prevWasCr = URI_FALSE;
-			break;
-
-		default:
-			/* Copy one char unmodified */
-			if (read > write) {
-				write[0] = read[0];
-			}
-			read++;
-			write++;
-
-			prevWasCr = URI_FALSE;
-		}
-	}
-}
-
-
-
-#endif
+/*
+ * uriparser - RFC 3986 URI parsing library
+ *
+ * Copyright (C) 2007, Weijia Song <songweijia@gmail.com>
+ * Copyright (C) 2007, Sebastian Pipping <webmaster@hartwork.org>
+ * All rights reserved.
+ *
+ * Redistribution  and use in source and binary forms, with or without
+ * modification,  are permitted provided that the following conditions
+ * are met:
+ *
+ *     * Redistributions   of  source  code  must  retain  the   above
+ *       copyright  notice, this list of conditions and the  following
+ *       disclaimer.
+ *
+ *     * Redistributions  in  binary  form must  reproduce  the  above
+ *       copyright  notice, this list of conditions and the  following
+ *       disclaimer   in  the  documentation  and/or  other  materials
+ *       provided with the distribution.
+ *
+ *     * Neither  the name of the <ORGANIZATION> nor the names of  its
+ *       contributors  may  be  used to endorse  or  promote  products
+ *       derived  from  this software without specific  prior  written
+ *       permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS  IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT  NOT
+ * LIMITED  TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND  FITNESS
+ * FOR  A  PARTICULAR  PURPOSE ARE DISCLAIMED. IN NO EVENT  SHALL  THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL,    SPECIAL,   EXEMPLARY,   OR   CONSEQUENTIAL   DAMAGES
+ * (INCLUDING,  BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES;  LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT  LIABILITY,  OR  TORT (INCLUDING  NEGLIGENCE  OR  OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/* What encodings are enabled? */
+#include <uriparser/UriDefsConfig.h>
+#if (!defined(URI_PASS_ANSI) && !defined(URI_PASS_UNICODE))
+/* Include SELF twice */
+# define URI_PASS_ANSI 1
+# include "UriEscape.c"
+# undef URI_PASS_ANSI
+# define URI_PASS_UNICODE 1
+# include "UriEscape.c"
+# undef URI_PASS_UNICODE
+#else
+# ifdef URI_PASS_ANSI
+#  include <uriparser/UriDefsAnsi.h>
+# else
+#  include <uriparser/UriDefsUnicode.h>
+#  include <wchar.h>
+# endif
+
+
+
+#ifndef URI_DOXYGEN
+# include <uriparser/Uri.h>
+# include "UriCommon.h"
+#endif
+
+
+
+URI_CHAR * URI_FUNC(Escape)(const URI_CHAR * in, URI_CHAR * out,
+		UriBool spaceToPlus, UriBool normalizeBreaks) {
+	return URI_FUNC(EscapeEx)(in, NULL, out, spaceToPlus, normalizeBreaks);
+}
+
+
+
+URI_CHAR * URI_FUNC(EscapeEx)(const URI_CHAR * inFirst,
+		const URI_CHAR * inAfterLast, URI_CHAR * out,
+		UriBool spaceToPlus, UriBool normalizeBreaks) {
+	const URI_CHAR * read = inFirst;
+	URI_CHAR * write = out;
+	UriBool prevWasCr = URI_FALSE;
+	if ((out == NULL) || (inFirst == out)) {
+		return NULL;
+	} else if (inFirst == NULL) {
+		if (out != NULL) {
+			out[0] = _UT('\0');
+		}
+		return out;
+	}
+
+	for (;;) {
+		if ((inAfterLast != NULL) && (read >= inAfterLast)) {
+			write[0] = _UT('\0');
+			return write;
+		}
+
+		switch (read[0]) {
+		case _UT('\0'):
+			write[0] = _UT('\0');
+			return write;
+
+		case _UT(' '):
+			if (spaceToPlus) {
+				write[0] = _UT('+');
+				write++;
+			} else {
+				write[0] = _UT('%');
+				write[1] = _UT('2');
+				write[2] = _UT('0');
+				write += 3;
+			}
+			prevWasCr = URI_FALSE;
+			break;
+
+		case _UT('a'): /* ALPHA */
+		case _UT('A'):
+		case _UT('b'):
+		case _UT('B'):
+		case _UT('c'):
+		case _UT('C'):
+		case _UT('d'):
+		case _UT('D'):
+		case _UT('e'):
+		case _UT('E'):
+		case _UT('f'):
+		case _UT('F'):
+		case _UT('g'):
+		case _UT('G'):
+		case _UT('h'):
+		case _UT('H'):
+		case _UT('i'):
+		case _UT('I'):
+		case _UT('j'):
+		case _UT('J'):
+		case _UT('k'):
+		case _UT('K'):
+		case _UT('l'):
+		case _UT('L'):
+		case _UT('m'):
+		case _UT('M'):
+		case _UT('n'):
+		case _UT('N'):
+		case _UT('o'):
+		case _UT('O'):
+		case _UT('p'):
+		case _UT('P'):
+		case _UT('q'):
+		case _UT('Q'):
+		case _UT('r'):
+		case _UT('R'):
+		case _UT('s'):
+		case _UT('S'):
+		case _UT('t'):
+		case _UT('T'):
+		case _UT('u'):
+		case _UT('U'):
+		case _UT('v'):
+		case _UT('V'):
+		case _UT('w'):
+		case _UT('W'):
+		case _UT('x'):
+		case _UT('X'):
+		case _UT('y'):
+		case _UT('Y'):
+		case _UT('z'):
+		case _UT('Z'):
+		case _UT('0'): /* DIGIT */
+		case _UT('1'):
+		case _UT('2'):
+		case _UT('3'):
+		case _UT('4'):
+		case _UT('5'):
+		case _UT('6'):
+		case _UT('7'):
+		case _UT('8'):
+		case _UT('9'):
+		case _UT('-'): /* "-" / "." / "_" / "~" */
+		case _UT('.'):
+		case _UT('_'):
+		case _UT('~'):
+			/* Copy unmodified */
+			write[0] = read[0];
+			write++;
+
+			prevWasCr = URI_FALSE;
+			break;
+
+		case _UT('\x0a'):
+			if (normalizeBreaks) {
+				if (!prevWasCr) {
+					write[0] = _UT('%');
+					write[1] = _UT('0');
+					write[2] = _UT('D');
+					write[3] = _UT('%');
+					write[4] = _UT('0');
+					write[5] = _UT('A');
+					write += 6;
+				}
+			} else {
+				write[0] = _UT('%');
+				write[1] = _UT('0');
+				write[2] = _UT('A');
+				write += 3;
+			}
+			prevWasCr = URI_FALSE;
+			break;
+
+		case _UT('\x0d'):
+			if (normalizeBreaks) {
+				write[0] = _UT('%');
+				write[1] = _UT('0');
+				write[2] = _UT('D');
+				write[3] = _UT('%');
+				write[4] = _UT('0');
+				write[5] = _UT('A');
+				write += 6;
+			} else {
+				write[0] = _UT('%');
+				write[1] = _UT('0');
+				write[2] = _UT('D');
+				write += 3;
+			}
+			prevWasCr = URI_TRUE;
+			break;
+
+		default:
+			/* Percent encode */
+			{
+				const unsigned char code = (unsigned char)read[0];
+				write[0] = _UT('%');
+				write[1] = URI_FUNC(HexToLetter)(code >> 4);
+				write[2] = URI_FUNC(HexToLetter)(code & 0x0f);
+				write += 3;
+			}
+			prevWasCr = URI_FALSE;
+			break;
+		}
+
+		read++;
+	}
+}
+
+
+
+const URI_CHAR * URI_FUNC(UnescapeInPlace)(URI_CHAR * inout) {
+	return URI_FUNC(UnescapeInPlaceEx)(inout, URI_FALSE, URI_BR_DONT_TOUCH);
+}
+
+
+
+const URI_CHAR * URI_FUNC(UnescapeInPlaceEx)(URI_CHAR * inout,
+		UriBool plusToSpace, UriBreakConversion breakConversion) {
+	URI_CHAR * read = inout;
+	URI_CHAR * write = inout;
+	UriBool prevWasCr = URI_FALSE;
+
+	if (inout == NULL) {
+		return NULL;
+	}
+
+	for (;;) {
+		switch (read[0]) {
+		case _UT('\0'):
+			if (read > write) {
+				write[0] = _UT('\0');
+			}
+			return write;
+
+		case _UT('%'):
+			switch (read[1]) {
+			case _UT('0'):
+			case _UT('1'):
+			case _UT('2'):
+			case _UT('3'):
+			case _UT('4'):
+			case _UT('5'):
+			case _UT('6'):
+			case _UT('7'):
+			case _UT('8'):
+			case _UT('9'):
+			case _UT('a'):
+			case _UT('b'):
+			case _UT('c'):
+			case _UT('d'):
+			case _UT('e'):
+			case _UT('f'):
+			case _UT('A'):
+			case _UT('B'):
+			case _UT('C'):
+			case _UT('D'):
+			case _UT('E'):
+			case _UT('F'):
+				switch (read[2]) {
+				case _UT('0'):
+				case _UT('1'):
+				case _UT('2'):
+				case _UT('3'):
+				case _UT('4'):
+				case _UT('5'):
+				case _UT('6'):
+				case _UT('7'):
+				case _UT('8'):
+				case _UT('9'):
+				case _UT('a'):
+				case _UT('b'):
+				case _UT('c'):
+				case _UT('d'):
+				case _UT('e'):
+				case _UT('f'):
+				case _UT('A'):
+				case _UT('B'):
+				case _UT('C'):
+				case _UT('D'):
+				case _UT('E'):
+				case _UT('F'):
+					{
+						/* Percent group found */
+						const unsigned char left = URI_FUNC(HexdigToInt)(read[1]);
+						const unsigned char right = URI_FUNC(HexdigToInt)(read[2]);
+						const int code = 16 * left + right;
+						switch (code) {
+						case 10:
+							switch (breakConversion) {
+							case URI_BR_TO_LF:
+								if (!prevWasCr) {
+									write[0] = (URI_CHAR)10;
+									write++;
+								}
+								break;
+
+							case URI_BR_TO_CRLF:
+								if (!prevWasCr) {
+									write[0] = (URI_CHAR)13;
+									write[1] = (URI_CHAR)10;
+									write += 2;
+								}
+								break;
+
+							case URI_BR_TO_CR:
+								if (!prevWasCr) {
+									write[0] = (URI_CHAR)13;
+									write++;
+								}
+								break;
+
+							case URI_BR_DONT_TOUCH:
+							default:
+								write[0] = (URI_CHAR)10;
+								write++;
+
+							}
+							prevWasCr = URI_FALSE;
+							break;
+
+						case 13:
+							switch (breakConversion) {
+							case URI_BR_TO_LF:
+								write[0] = (URI_CHAR)10;
+								write++;
+								break;
+
+							case URI_BR_TO_CRLF:
+								write[0] = (URI_CHAR)13;
+								write[1] = (URI_CHAR)10;
+								write += 2;
+								break;
+
+							case URI_BR_TO_CR:
+								write[0] = (URI_CHAR)13;
+								write++;
+								break;
+
+							case URI_BR_DONT_TOUCH:
+							default:
+								write[0] = (URI_CHAR)13;
+								write++;
+
+							}
+							prevWasCr = URI_TRUE;
+							break;
+
+						default:
+							write[0] = (URI_CHAR)(code);
+							write++;
+
+							prevWasCr = URI_FALSE;
+
+						}
+						read += 3;
+					}
+					break;
+
+				default:
+					/* Copy two chars unmodified and */
+					/* look at this char again */
+					if (read > write) {
+						write[0] = read[0];
+						write[1] = read[1];
+					}
+					read += 2;
+					write += 2;
+
+					prevWasCr = URI_FALSE;
+				}
+				break;
+
+			default:
+				/* Copy one char unmodified and */
+				/* look at this char again */
+				if (read > write) {
+					write[0] = read[0];
+				}
+				read++;
+				write++;
+
+				prevWasCr = URI_FALSE;
+			}
+			break;
+
+		case _UT('+'):
+			if (plusToSpace) {
+				/* Convert '+' to ' ' */
+				write[0] = _UT(' ');
+			} else {
+				/* Copy one char unmodified */
+				if (read > write) {
+					write[0] = read[0];
+				}
+			}
+			read++;
+			write++;
+
+			prevWasCr = URI_FALSE;
+			break;
+
+		default:
+			/* Copy one char unmodified */
+			if (read > write) {
+				write[0] = read[0];
+			}
+			read++;
+			write++;
+
+			prevWasCr = URI_FALSE;
+		}
+	}
+}
+
+
+
+#endif
diff -Nru /tmp/bxdedfLB6u/uriparser-0.6.0/lib/UriFile.c /tmp/fLjZ2dz9P3/uriparser-0.7.4/lib/UriFile.c
--- uriparser-0.6.0/lib/UriFile.c	2007-09-12 19:55:08.000000000 +0100
+++ uriparser-0.7.4/lib/UriFile.c	2008-12-20 18:52:47.000000000 +0000
@@ -1,174 +1,182 @@
-/*
- * uriparser - RFC 3986 URI parsing library
- *
- * Copyright (C) 2007, Weijia Song <songweijia@gmail.com>
- * Copyright (C) 2007, Sebastian Pipping <webmaster@hartwork.org>
- * All rights reserved.
- *
- * Redistribution  and use in source and binary forms, with or without
- * modification,  are permitted provided that the following conditions
- * are met:
- *
- *     * Redistributions   of  source  code  must  retain  the   above
- *       copyright  notice, this list of conditions and the  following
- *       disclaimer.
- *
- *     * Redistributions  in  binary  form must  reproduce  the  above
- *       copyright  notice, this list of conditions and the  following
- *       disclaimer   in  the  documentation  and/or  other  materials
- *       provided with the distribution.
- *
- *     * Neither  the name of the <ORGANIZATION> nor the names of  its
- *       contributors  may  be  used to endorse  or  promote  products
- *       derived  from  this software without specific  prior  written
- *       permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS  IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT  NOT
- * LIMITED  TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND  FITNESS
- * FOR  A  PARTICULAR  PURPOSE ARE DISCLAIMED. IN NO EVENT  SHALL  THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL,    SPECIAL,   EXEMPLARY,   OR   CONSEQUENTIAL   DAMAGES
- * (INCLUDING,  BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES;  LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT  LIABILITY,  OR  TORT (INCLUDING  NEGLIGENCE  OR  OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-/* What encodings are enabled? */
-#include <uriparser/UriDefsConfig.h>
-#if (!defined(URI_PASS_ANSI) && !defined(URI_PASS_UNICODE))
-/* Include SELF twice */
-# define URI_PASS_ANSI 1
-# include "UriFile.c"
-# undef URI_PASS_ANSI
-# define URI_PASS_UNICODE 1
-# include "UriFile.c"
-# undef URI_PASS_UNICODE
-#else
-# ifdef URI_PASS_ANSI
-#  include <uriparser/UriDefsAnsi.h>
-# else
-#  include <uriparser/UriDefsUnicode.h>
-#  include <wchar.h>
-# endif
-
-
-
-#ifndef URI_DOXYGEN
-# include <uriparser/Uri.h>
-#endif
-
-
-
-static URI_INLINE int URI_FUNC(FilenameToUriString)(const URI_CHAR * filename,
-		URI_CHAR * uriString, UriBool fromUnix) {
-	const URI_CHAR * const prefix = fromUnix ? _UT("file://") : _UT("file:///");
-	const int prefixLen = fromUnix ? 7 : 8;
-
-	const URI_CHAR * input = filename;
-	URI_CHAR * output = uriString + prefixLen;
-	const URI_CHAR * lastSep = input - 1;
-	UriBool firstSegment = URI_TRUE;
-
-	/* Copy prefix */
-	memcpy(uriString, prefix, prefixLen * sizeof(URI_CHAR));
-
-	/* Copy and escape on the fly */
-	for (;;) {
-		if ((input[0] == _UT('\0'))
-				|| (fromUnix && input[0] == _UT('/'))
-				|| (!fromUnix && input[0] == _UT('\\'))) {
-			/* Copy text after last seperator */
-			if (lastSep + 1 < input) {
-				if (!fromUnix && (firstSegment == URI_TRUE)) {
-					/* Quick hack to not convert "C:" to "C%3A" */
-					const int charsToCopy = (int)(input - (lastSep + 1));
-					memcpy(output, lastSep + 1, charsToCopy * sizeof(URI_CHAR));
-					output += charsToCopy;
-				} else {
-					output = URI_FUNC(EscapeEx)(lastSep + 1, input, output,
-							URI_FALSE, URI_FALSE);
-				}
-			}
-			firstSegment = URI_FALSE;
-		}
-
-		if (input[0] == _UT('\0')) {
-			output[0] = _UT('\0');
-			break;
-		} else if (fromUnix && (input[0] == _UT('/'))) {
-			/* Copy separators unmodified */
-			output[0] = _UT('/');
-			output++;
-			lastSep = input;
-		} else if (!fromUnix && (input[0] == _UT('\\'))) {
-			/* Convert backslashes to forward slashes */
-			output[0] = _UT('/');
-			output++;
-			lastSep = input;
-		}
-		input++;
-	}
-
-	return URI_SUCCESS;
-}
-
-
-
-static URI_INLINE int URI_FUNC(UriStringToFilename)(const URI_CHAR * uriString,
-		URI_CHAR * filename, UriBool toUnix) {
-	const URI_CHAR * const prefix = toUnix ? _UT("file://") : _UT("file:///");
-	const int prefixLen = toUnix ? 7 : 8;
-	URI_CHAR * walker = filename;
-	size_t charsToCopy;
-
-	if (URI_STRNCMP(uriString, prefix, prefixLen)) {
-		return URI_ERROR_SYNTAX;
-	}
-	charsToCopy = URI_STRLEN(uriString + prefixLen) + 1;
-	memcpy(filename, uriString + prefixLen, charsToCopy * sizeof(URI_CHAR));
-	URI_FUNC(UnescapeInPlaceEx)(filename, URI_FALSE, URI_BR_DONT_TOUCH);
-
-	/* Convert forward slashes to backslashes */
-	if (!toUnix) {
-		while (walker[0] != _UT('\0')) {
-			if (walker[0] == _UT('/')) {
-				walker[0] = _UT('\\');
-			}
-			walker++;
-		}
-	}
-
-	return URI_SUCCESS;
-}
-
-
-
-int URI_FUNC(UnixFilenameToUriString)(const URI_CHAR * filename, URI_CHAR * uriString) {
-	return URI_FUNC(FilenameToUriString)(filename, uriString, URI_TRUE);
-}
-
-
-
-int URI_FUNC(WindowsFilenameToUriString)(const URI_CHAR * filename, URI_CHAR * uriString) {
-	return URI_FUNC(FilenameToUriString)(filename, uriString, URI_FALSE);
-}
-
-
-
-int URI_FUNC(UriStringToUnixFilename)(const URI_CHAR * uriString, URI_CHAR * filename) {
-	return URI_FUNC(UriStringToFilename)(uriString, filename, URI_TRUE);
-}
-
-
-
-int URI_FUNC(UriStringToWindowsFilename)(const URI_CHAR * uriString, URI_CHAR * filename) {
-	return URI_FUNC(UriStringToFilename)(uriString, filename, URI_FALSE);
-}
-
-
-
-#endif
+/*
+ * uriparser - RFC 3986 URI parsing library
+ *
+ * Copyright (C) 2007, Weijia Song <songweijia@gmail.com>
+ * Copyright (C) 2007, Sebastian Pipping <webmaster@hartwork.org>
+ * All rights reserved.
+ *
+ * Redistribution  and use in source and binary forms, with or without
+ * modification,  are permitted provided that the following conditions
+ * are met:
+ *
+ *     * Redistributions   of  source  code  must  retain  the   above
+ *       copyright  notice, this list of conditions and the  following
+ *       disclaimer.
+ *
+ *     * Redistributions  in  binary  form must  reproduce  the  above
+ *       copyright  notice, this list of conditions and the  following
+ *       disclaimer   in  the  documentation  and/or  other  materials
+ *       provided with the distribution.
+ *
+ *     * Neither  the name of the <ORGANIZATION> nor the names of  its
+ *       contributors  may  be  used to endorse  or  promote  products
+ *       derived  from  this software without specific  prior  written
+ *       permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS  IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT  NOT
+ * LIMITED  TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND  FITNESS
+ * FOR  A  PARTICULAR  PURPOSE ARE DISCLAIMED. IN NO EVENT  SHALL  THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL,    SPECIAL,   EXEMPLARY,   OR   CONSEQUENTIAL   DAMAGES
+ * (INCLUDING,  BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES;  LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT  LIABILITY,  OR  TORT (INCLUDING  NEGLIGENCE  OR  OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/* What encodings are enabled? */
+#include <uriparser/UriDefsConfig.h>
+#if (!defined(URI_PASS_ANSI) && !defined(URI_PASS_UNICODE))
+/* Include SELF twice */
+# define URI_PASS_ANSI 1
+# include "UriFile.c"
+# undef URI_PASS_ANSI
+# define URI_PASS_UNICODE 1
+# include "UriFile.c"
+# undef URI_PASS_UNICODE
+#else
+# ifdef URI_PASS_ANSI
+#  include <uriparser/UriDefsAnsi.h>
+# else
+#  include <uriparser/UriDefsUnicode.h>
+#  include <wchar.h>
+# endif
+
+
+
+#ifndef URI_DOXYGEN
+# include <uriparser/Uri.h>
+#endif
+
+
+
+static URI_INLINE int URI_FUNC(FilenameToUriString)(const URI_CHAR * filename,
+		URI_CHAR * uriString, UriBool fromUnix) {
+	const URI_CHAR * input = filename;
+	const URI_CHAR * lastSep = input - 1;
+	UriBool firstSegment = URI_TRUE;
+	URI_CHAR * output = uriString;
+	const UriBool absolute = (filename != NULL) && ((fromUnix && (filename[0] == _UT('/')))
+			|| (!fromUnix && (filename[0] != _UT('\0')) && (filename[1] == _UT(':'))));
+
+	if ((filename == NULL) || (uriString == NULL)) {
+		return URI_ERROR_NULL;
+	}
+
+	if (absolute) {
+		const URI_CHAR * const prefix = fromUnix ? _UT("file://") : _UT("file:///");
+		const int prefixLen = fromUnix ? 7 : 8;
+
+		/* Copy prefix */
+		memcpy(uriString, prefix, prefixLen * sizeof(URI_CHAR));
+		output += prefixLen;
+	}
+
+	/* Copy and escape on the fly */
+	for (;;) {
+		if ((input[0] == _UT('\0'))
+				|| (fromUnix && input[0] == _UT('/'))
+				|| (!fromUnix && input[0] == _UT('\\'))) {
+			/* Copy text after last seperator */
+			if (lastSep + 1 < input) {
+				if (!fromUnix && absolute && (firstSegment == URI_TRUE)) {
+					/* Quick hack to not convert "C:" to "C%3A" */
+					const int charsToCopy = (int)(input - (lastSep + 1));
+					memcpy(output, lastSep + 1, charsToCopy * sizeof(URI_CHAR));
+					output += charsToCopy;
+				} else {
+					output = URI_FUNC(EscapeEx)(lastSep + 1, input, output,
+							URI_FALSE, URI_FALSE);
+				}
+			}
+			firstSegment = URI_FALSE;
+		}
+
+		if (input[0] == _UT('\0')) {
+			output[0] = _UT('\0');
+			break;
+		} else if (fromUnix && (input[0] == _UT('/'))) {
+			/* Copy separators unmodified */
+			output[0] = _UT('/');
+			output++;
+			lastSep = input;
+		} else if (!fromUnix && (input[0] == _UT('\\'))) {
+			/* Convert backslashes to forward slashes */
+			output[0] = _UT('/');
+			output++;
+			lastSep = input;
+		}
+		input++;
+	}
+
+	return URI_SUCCESS;
+}
+
+
+
+static URI_INLINE int URI_FUNC(UriStringToFilename)(const URI_CHAR * uriString,
+		URI_CHAR * filename, UriBool toUnix) {
+	const URI_CHAR * const prefix = toUnix ? _UT("file://") : _UT("file:///");
+	const int prefixLen = toUnix ? 7 : 8;
+	URI_CHAR * walker = filename;
+	size_t charsToCopy;
+	const UriBool absolute = (URI_STRNCMP(uriString, prefix, prefixLen) == 0);
+	const int charsToSkip = (absolute ? prefixLen : 0);
+
+	charsToCopy = URI_STRLEN(uriString + charsToSkip) + 1;
+	memcpy(filename, uriString + charsToSkip, charsToCopy * sizeof(URI_CHAR));
+	URI_FUNC(UnescapeInPlaceEx)(filename, URI_FALSE, URI_BR_DONT_TOUCH);
+
+	/* Convert forward slashes to backslashes */
+	if (!toUnix) {
+		while (walker[0] != _UT('\0')) {
+			if (walker[0] == _UT('/')) {
+				walker[0] = _UT('\\');
+			}
+			walker++;
+		}
+	}
+
+	return URI_SUCCESS;
+}
+
+
+
+int URI_FUNC(UnixFilenameToUriString)(const URI_CHAR * filename, URI_CHAR * uriString) {
+	return URI_FUNC(FilenameToUriString)(filename, uriString, URI_TRUE);
+}
+
+
+
+int URI_FUNC(WindowsFilenameToUriString)(const URI_CHAR * filename, URI_CHAR * uriString) {
+	return URI_FUNC(FilenameToUriString)(filename, uriString, URI_FALSE);
+}
+
+
+
+int URI_FUNC(UriStringToUnixFilename)(const URI_CHAR * uriString, URI_CHAR * filename) {
+	return URI_FUNC(UriStringToFilename)(uriString, filename, URI_TRUE);
+}
+
+
+
+int URI_FUNC(UriStringToWindowsFilename)(const URI_CHAR * uriString, URI_CHAR * filename) {
+	return URI_FUNC(UriStringToFilename)(uriString, filename, URI_FALSE);
+}
+
+
+
+#endif
diff -Nru /tmp/bxdedfLB6u/uriparser-0.6.0/lib/UriNormalizeBase.c /tmp/fLjZ2dz9P3/uriparser-0.7.4/lib/UriNormalizeBase.c
--- uriparser-0.6.0/lib/UriNormalizeBase.c	2007-07-27 06:37:43.000000000 +0100
+++ uriparser-0.7.4/lib/UriNormalizeBase.c	2008-12-20 18:52:47.000000000 +0000
@@ -1,119 +1,119 @@
-/*
- * uriparser - RFC 3986 URI parsing library
- *
- * Copyright (C) 2007, Weijia Song <songweijia@gmail.com>
- * Copyright (C) 2007, Sebastian Pipping <webmaster@hartwork.org>
- * All rights reserved.
- *
- * Redistribution  and use in source and binary forms, with or without
- * modification,  are permitted provided that the following conditions
- * are met:
- *
- *     * Redistributions   of  source  code  must  retain  the   above
- *       copyright  notice, this list of conditions and the  following
- *       disclaimer.
- *
- *     * Redistributions  in  binary  form must  reproduce  the  above
- *       copyright  notice, this list of conditions and the  following
- *       disclaimer   in  the  documentation  and/or  other  materials
- *       provided with the distribution.
- *
- *     * Neither  the name of the <ORGANIZATION> nor the names of  its
- *       contributors  may  be  used to endorse  or  promote  products
- *       derived  from  this software without specific  prior  written
- *       permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS  IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT  NOT
- * LIMITED  TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND  FITNESS
- * FOR  A  PARTICULAR  PURPOSE ARE DISCLAIMED. IN NO EVENT  SHALL  THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL,    SPECIAL,   EXEMPLARY,   OR   CONSEQUENTIAL   DAMAGES
- * (INCLUDING,  BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES;  LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT  LIABILITY,  OR  TORT (INCLUDING  NEGLIGENCE  OR  OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-#ifndef URI_DOXYGEN
-# include "UriNormalizeBase.h"
-#endif
-
-
-
-UriBool uriIsUnreserved(int code) {
-	switch (code) {
-	case L'a': /* ALPHA */
-	case L'A':
-	case L'b':
-	case L'B':
-	case L'c':
-	case L'C':
-	case L'd':
-	case L'D':
-	case L'e':
-	case L'E':
-	case L'f':
-	case L'F':
-	case L'g':
-	case L'G':
-	case L'h':
-	case L'H':
-	case L'i':
-	case L'I':
-	case L'j':
-	case L'J':
-	case L'k':
-	case L'K':
-	case L'l':
-	case L'L':
-	case L'm':
-	case L'M':
-	case L'n':
-	case L'N':
-	case L'o':
-	case L'O':
-	case L'p':
-	case L'P':
-	case L'q':
-	case L'Q':
-	case L'r':
-	case L'R':
-	case L's':
-	case L'S':
-	case L't':
-	case L'T':
-	case L'u':
-	case L'U':
-	case L'v':
-	case L'V':
-	case L'w':
-	case L'W':
-	case L'x':
-	case L'X':
-	case L'y':
-	case L'Y':
-	case L'z':
-	case L'Z':
-	case L'0': /* DIGIT */
-	case L'1':
-	case L'2':
-	case L'3':
-	case L'4':
-	case L'5':
-	case L'6':
-	case L'7':
-	case L'8':
-	case L'9':
-	case L'-': /* "-" / "." / "_" / "~" */
-	case L'.':
-	case L'_':
-	case L'~':
-		return URI_TRUE;
-
-	default:
-		return URI_FALSE;
-	}
-}
+/*
+ * uriparser - RFC 3986 URI parsing library
+ *
+ * Copyright (C) 2007, Weijia Song <songweijia@gmail.com>
+ * Copyright (C) 2007, Sebastian Pipping <webmaster@hartwork.org>
+ * All rights reserved.
+ *
+ * Redistribution  and use in source and binary forms, with or without
+ * modification,  are permitted provided that the following conditions
+ * are met:
+ *
+ *     * Redistributions   of  source  code  must  retain  the   above
+ *       copyright  notice, this list of conditions and the  following
+ *       disclaimer.
+ *
+ *     * Redistributions  in  binary  form must  reproduce  the  above
+ *       copyright  notice, this list of conditions and the  following
+ *       disclaimer   in  the  documentation  and/or  other  materials
+ *       provided with the distribution.
+ *
+ *     * Neither  the name of the <ORGANIZATION> nor the names of  its
+ *       contributors  may  be  used to endorse  or  promote  products
+ *       derived  from  this software without specific  prior  written
+ *       permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS  IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT  NOT
+ * LIMITED  TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND  FITNESS
+ * FOR  A  PARTICULAR  PURPOSE ARE DISCLAIMED. IN NO EVENT  SHALL  THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL,    SPECIAL,   EXEMPLARY,   OR   CONSEQUENTIAL   DAMAGES
+ * (INCLUDING,  BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES;  LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT  LIABILITY,  OR  TORT (INCLUDING  NEGLIGENCE  OR  OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef URI_DOXYGEN
+# include "UriNormalizeBase.h"
+#endif
+
+
+
+UriBool uriIsUnreserved(int code) {
+	switch (code) {
+	case L'a': /* ALPHA */
+	case L'A':
+	case L'b':
+	case L'B':
+	case L'c':
+	case L'C':
+	case L'd':
+	case L'D':
+	case L'e':
+	case L'E':
+	case L'f':
+	case L'F':
+	case L'g':
+	case L'G':
+	case L'h':
+	case L'H':
+	case L'i':
+	case L'I':
+	case L'j':
+	case L'J':
+	case L'k':
+	case L'K':
+	case L'l':
+	case L'L':
+	case L'm':
+	case L'M':
+	case L'n':
+	case L'N':
+	case L'o':
+	case L'O':
+	case L'p':
+	case L'P':
+	case L'q':
+	case L'Q':
+	case L'r':
+	case L'R':
+	case L's':
+	case L'S':
+	case L't':
+	case L'T':
+	case L'u':
+	case L'U':
+	case L'v':
+	case L'V':
+	case L'w':
+	case L'W':
+	case L'x':
+	case L'X':
+	case L'y':
+	case L'Y':
+	case L'z':
+	case L'Z':
+	case L'0': /* DIGIT */
+	case L'1':
+	case L'2':
+	case L'3':
+	case L'4':
+	case L'5':
+	case L'6':
+	case L'7':
+	case L'8':
+	case L'9':
+	case L'-': /* "-" / "." / "_" / "~" */
+	case L'.':
+	case L'_':
+	case L'~':
+		return URI_TRUE;
+
+	default:
+		return URI_FALSE;
+	}
+}
diff -Nru /tmp/bxdedfLB6u/uriparser-0.6.0/lib/UriNormalizeBase.h /tmp/fLjZ2dz9P3/uriparser-0.7.4/lib/UriNormalizeBase.h
--- uriparser-0.6.0/lib/UriNormalizeBase.h	2007-07-27 06:37:43.000000000 +0100
+++ uriparser-0.7.4/lib/UriNormalizeBase.h	2008-12-20 18:52:47.000000000 +0000
@@ -1,53 +1,53 @@
-/*
- * uriparser - RFC 3986 URI parsing library
- *
- * Copyright (C) 2007, Weijia Song <songweijia@gmail.com>
- * Copyright (C) 2007, Sebastian Pipping <webmaster@hartwork.org>
- * All rights reserved.
- *
- * Redistribution  and use in source and binary forms, with or without
- * modification,  are permitted provided that the following conditions
- * are met:
- *
- *     * Redistributions   of  source  code  must  retain  the   above
- *       copyright  notice, this list of conditions and the  following
- *       disclaimer.
- *
- *     * Redistributions  in  binary  form must  reproduce  the  above
- *       copyright  notice, this list of conditions and the  following
- *       disclaimer   in  the  documentation  and/or  other  materials
- *       provided with the distribution.
- *
- *     * Neither  the name of the <ORGANIZATION> nor the names of  its
- *       contributors  may  be  used to endorse  or  promote  products
- *       derived  from  this software without specific  prior  written
- *       permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS  IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT  NOT
- * LIMITED  TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND  FITNESS
- * FOR  A  PARTICULAR  PURPOSE ARE DISCLAIMED. IN NO EVENT  SHALL  THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL,    SPECIAL,   EXEMPLARY,   OR   CONSEQUENTIAL   DAMAGES
- * (INCLUDING,  BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES;  LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT  LIABILITY,  OR  TORT (INCLUDING  NEGLIGENCE  OR  OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-#ifndef URI_NORMALIZE_BASE_H
-#define URI_NORMALIZE_BASE_H 1
-
-
-
-#include <uriparser/UriBase.h>
-
-
-
-UriBool uriIsUnreserved(int code);
-
-
-
-#endif /* URI_NORMALIZE_BASE_H */
+/*
+ * uriparser - RFC 3986 URI parsing library
+ *
+ * Copyright (C) 2007, Weijia Song <songweijia@gmail.com>
+ * Copyright (C) 2007, Sebastian Pipping <webmaster@hartwork.org>
+ * All rights reserved.
+ *
+ * Redistribution  and use in source and binary forms, with or without
+ * modification,  are permitted provided that the following conditions
+ * are met:
+ *
+ *     * Redistributions   of  source  code  must  retain  the   above
+ *       copyright  notice, this list of conditions and the  following
+ *       disclaimer.
+ *
+ *     * Redistributions  in  binary  form must  reproduce  the  above
+ *       copyright  notice, this list of conditions and the  following
+ *       disclaimer   in  the  documentation  and/or  other  materials
+ *       provided with the distribution.
+ *
+ *     * Neither  the name of the <ORGANIZATION> nor the names of  its
+ *       contributors  may  be  used to endorse  or  promote  products
+ *       derived  from  this software without specific  prior  written
+ *       permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS  IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT  NOT
+ * LIMITED  TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND  FITNESS
+ * FOR  A  PARTICULAR  PURPOSE ARE DISCLAIMED. IN NO EVENT  SHALL  THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL,    SPECIAL,   EXEMPLARY,   OR   CONSEQUENTIAL   DAMAGES
+ * (INCLUDING,  BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES;  LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT  LIABILITY,  OR  TORT (INCLUDING  NEGLIGENCE  OR  OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef URI_NORMALIZE_BASE_H
+#define URI_NORMALIZE_BASE_H 1
+
+
+
+#include <uriparser/UriBase.h>
+
+
+
+UriBool uriIsUnreserved(int code);
+
+
+
+#endif /* URI_NORMALIZE_BASE_H */
diff -Nru /tmp/bxdedfLB6u/uriparser-0.6.0/lib/UriNormalize.c /tmp/fLjZ2dz9P3/uriparser-0.7.4/lib/UriNormalize.c
--- uriparser-0.6.0/lib/UriNormalize.c	2007-08-09 04:17:41.000000000 +0100
+++ uriparser-0.7.4/lib/UriNormalize.c	2008-12-20 18:52:47.000000000 +0000
@@ -1,701 +1,722 @@
-/*
- * uriparser - RFC 3986 URI parsing library
- *
- * Copyright (C) 2007, Weijia Song <songweijia@gmail.com>
- * Copyright (C) 2007, Sebastian Pipping <webmaster@hartwork.org>
- * All rights reserved.
- *
- * Redistribution  and use in source and binary forms, with or without
- * modification,  are permitted provided that the following conditions
- * are met:
- *
- *     * Redistributions   of  source  code  must  retain  the   above
- *       copyright  notice, this list of conditions and the  following
- *       disclaimer.
- *
- *     * Redistributions  in  binary  form must  reproduce  the  above
- *       copyright  notice, this list of conditions and the  following
- *       disclaimer   in  the  documentation  and/or  other  materials
- *       provided with the distribution.
- *
- *     * Neither  the name of the <ORGANIZATION> nor the names of  its
- *       contributors  may  be  used to endorse  or  promote  products
- *       derived  from  this software without specific  prior  written
- *       permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS  IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT  NOT
- * LIMITED  TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND  FITNESS
- * FOR  A  PARTICULAR  PURPOSE ARE DISCLAIMED. IN NO EVENT  SHALL  THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL,    SPECIAL,   EXEMPLARY,   OR   CONSEQUENTIAL   DAMAGES
- * (INCLUDING,  BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES;  LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT  LIABILITY,  OR  TORT (INCLUDING  NEGLIGENCE  OR  OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-/**
- * @file UriNormalize.c
- * Holds the RFC 3986 %URI normalization implementation.
- * NOTE: This source file includes itself twice.
- */
-
-/* What encodings are enabled? */
-#include <uriparser/UriDefsConfig.h>
-#if (!defined(URI_PASS_ANSI) && !defined(URI_PASS_UNICODE))
-/* Include SELF twice */
-# define URI_PASS_ANSI 1
-# include "UriNormalize.c"
-# undef URI_PASS_ANSI
-# define URI_PASS_UNICODE 1
-# include "UriNormalize.c"
-# undef URI_PASS_UNICODE
-#else
-# ifdef URI_PASS_ANSI
-#  include <uriparser/UriDefsAnsi.h>
-# else
-#  include <uriparser/UriDefsUnicode.h>
-#  include <wchar.h>
-# endif
-
-
-
-#ifndef URI_DOXYGEN
-# include <uriparser/Uri.h>
-# include "UriNormalizeBase.h"
-# include "UriCommon.h"
-#endif
-
-
-
-static int URI_FUNC(NormalizeSyntaxEngine)(URI_TYPE(Uri) * uri, unsigned int inMask,
-		unsigned int * outMask);
-
-static UriBool URI_FUNC(MakeRangeOwner)(unsigned int * doneMask,
-		unsigned int maskTest, URI_TYPE(TextRange) * range);
-static UriBool URI_FUNC(MakeOwner)(URI_TYPE(Uri) * uri,
-		unsigned int * doneMask);
-
-static void URI_FUNC(FixPercentEncodingInplace)(const URI_CHAR * first,
-		const URI_CHAR ** afterLast);
-static UriBool URI_FUNC(FixPercentEncodingMalloc)(const URI_CHAR ** first,
-		const URI_CHAR ** afterLast);
-static void URI_FUNC(FixPercentEncodingEngine)(
-		const URI_CHAR * inFirst, const URI_CHAR * inAfterLast,
-		const URI_CHAR * outFirst, const URI_CHAR ** outAfterLast);
-
-static UriBool URI_FUNC(ContainsUppercaseLetters)(const URI_CHAR * first,
-		const URI_CHAR * afterLast);
-static UriBool URI_FUNC(ContainsUglyPercentEncoding)(const URI_CHAR * first,
-		const URI_CHAR * afterLast);
-
-static void URI_FUNC(LowercaseInplace)(const URI_CHAR * first,
-		const URI_CHAR * afterLast);
-static UriBool URI_FUNC(LowercaseMalloc)(const URI_CHAR ** first,
-		const URI_CHAR ** afterLast);
-
-static void URI_FUNC(PreventLeakage)(URI_TYPE(Uri) * uri,
-		unsigned int revertMask);
-
-
-
-static URI_INLINE void URI_FUNC(PreventLeakage)(URI_TYPE(Uri) * uri,
-		unsigned int revertMask) {
-	if (revertMask & URI_NORMALIZE_SCHEME) {
-		free((URI_CHAR *)uri->scheme.first);
-		uri->scheme.first = NULL;
-		uri->scheme.afterLast = NULL;
-	}
-
-	if (revertMask & URI_NORMALIZE_USER_INFO) {
-		free((URI_CHAR *)uri->userInfo.first);
-		uri->userInfo.first = NULL;
-		uri->userInfo.afterLast = NULL;
-	}
-
-	if (revertMask & URI_NORMALIZE_HOST) {
-		if (uri->hostData.ipFuture.first != NULL) {
-			/* IPvFuture */
-			free((URI_CHAR *)uri->hostData.ipFuture.first);
-			uri->hostData.ipFuture.first = NULL;
-			uri->hostData.ipFuture.afterLast = NULL;
-			uri->hostText.first = NULL;
-			uri->hostText.afterLast = NULL;
-		} else if ((uri->hostText.first != NULL)
-				&& (uri->hostData.ip4 == NULL)
-				&& (uri->hostData.ip6 == NULL)) {
-			/* Regname */
-			free((URI_CHAR *)uri->hostText.first);
-			uri->hostText.first = NULL;
-			uri->hostText.afterLast = NULL;
-		}
-	}
-
-	/* NOTE: Port cannot happen! */
-
-	if (revertMask & URI_NORMALIZE_PATH) {
-		URI_TYPE(PathSegment) * walker = uri->pathHead;
-		while (walker != NULL) {
-			URI_TYPE(PathSegment) * const next = walker->next;
-			if (walker->text.afterLast > walker->text.first) {
-				free((URI_CHAR *)walker->text.first);
-			}
-			free(walker);
-			walker = next;
-		}
-		uri->pathHead = NULL;
-		uri->pathTail = NULL;
-	}
-
-	if (revertMask & URI_NORMALIZE_QUERY) {
-		free((URI_CHAR *)uri->query.first);
-		uri->query.first = NULL;
-		uri->query.afterLast = NULL;
-	}
-
-	if (revertMask & URI_NORMALIZE_FRAGMENT) {
-		free((URI_CHAR *)uri->fragment.first);
-		uri->fragment.first = NULL;
-		uri->fragment.afterLast = NULL;
-	}
-}
-
-
-
-static URI_INLINE UriBool URI_FUNC(ContainsUppercaseLetters)(const URI_CHAR * first,
-		const URI_CHAR * afterLast) {
-	if ((first != NULL) && (afterLast != NULL) && (afterLast > first)) {
-		const URI_CHAR * i = first;
-		for (; i < afterLast; i++) {
-			/* 6.2.2.1 Case Normalization: uppercase letters in scheme or host */
-			if ((*i >= _UT('A')) && (*i <= _UT('Z'))) {
-				return URI_TRUE;
-			}
-		}
-	}
-	return URI_FALSE;
-}
-
-
-
-static URI_INLINE UriBool URI_FUNC(ContainsUglyPercentEncoding)(const URI_CHAR * first,
-		const URI_CHAR * afterLast) {
-	if ((first != NULL) && (afterLast != NULL) && (afterLast > first)) {
-		const URI_CHAR * i = first;
-		for (; i + 2 < afterLast; i++) {
-			if (i[0] == _UT('%')) {
-				/* 6.2.2.1 Case Normalization: *
-				 * lowercase percent-encodings */
-				if (((i[1] >= _UT('a')) && (i[1] <= _UT('f')))
-						|| ((i[2] >= _UT('a')) && (i[2] <= _UT('f')))) {
-					return URI_TRUE;
-				} else {
-					/* 6.2.2.2 Percent-Encoding Normalization: *
-					 * percent-encoded unreserved characters   */
-					const unsigned char left = URI_FUNC(HexdigToInt)(i[1]);
-					const unsigned char right = URI_FUNC(HexdigToInt)(i[2]);
-					const int code = 16 * left + right;
-					if (uriIsUnreserved(code)) {
-						return URI_TRUE;
-					}
-				}
-			}
-		}
-	}
-	return URI_FALSE;
-}
-
-
-
-static URI_INLINE void URI_FUNC(LowercaseInplace)(const URI_CHAR * first,
-		const URI_CHAR * afterLast) {
-	if ((first != NULL) && (afterLast != NULL) && (afterLast > first)) {
-		URI_CHAR * i = (URI_CHAR *)first;
-		const int lowerUpperDiff = (_UT('a') - _UT('A'));
-		for (; i < afterLast; i++) {
-			if ((*i >= _UT('A')) && (*i <=_UT('Z'))) {
-				*i = (URI_CHAR)(*i + lowerUpperDiff);
-			}
-		}
-	}
-}
-
-
-
-static URI_INLINE UriBool URI_FUNC(LowercaseMalloc)(const URI_CHAR ** first,
-		const URI_CHAR ** afterLast) {
-	int lenInChars;
-	const int lowerUpperDiff = (_UT('a') - _UT('A'));
-	URI_CHAR * buffer;
-	int i = 0;
-
-	if ((first == NULL) || (afterLast == NULL) || (*first == NULL)
-			|| (*afterLast == NULL)) {
-		return URI_FALSE;
-	}
-
-	lenInChars = (int)(*afterLast - *first);
-	if (lenInChars == 0) {
-		return URI_TRUE;
-	} else if (lenInChars < 0) {
-		return URI_FALSE;
-	}
-
-	buffer = malloc(lenInChars * sizeof(URI_CHAR));
-	if (buffer == NULL) {
-		return URI_FALSE;
-	}
-
-	for (; i < lenInChars; i++) {
-		if (((*first)[i] >= _UT('A')) && ((*first)[i] <=_UT('Z'))) {
-			buffer[i] = (URI_CHAR)((*first)[i] + lowerUpperDiff);
-		} else {
-			buffer[i] = (*first)[i];
-		}
-	}
-
-	*first = buffer;
-	*afterLast = buffer + lenInChars;
-	return URI_TRUE;
-}
-
-
-
-/* NOTE: Implementation must stay inplace-compatible */
-static URI_INLINE void URI_FUNC(FixPercentEncodingEngine)(
-		const URI_CHAR * inFirst, const URI_CHAR * inAfterLast,
-		const URI_CHAR * outFirst, const URI_CHAR ** outAfterLast) {
-	URI_CHAR * write = (URI_CHAR *)outFirst;
-	const int lenInChars = (int)(inAfterLast - inFirst);
-	int i = 0;
-
-	/* All but last two */
-	for (; i + 2 < lenInChars; i++) {
-		if (inFirst[i] != _UT('%')) {
-			write[0] = inFirst[i];
-			write++;
-		} else {
-			/* 6.2.2.2 Percent-Encoding Normalization: *
-			 * percent-encoded unreserved characters   */
-			const URI_CHAR one = inFirst[i + 1];
-			const URI_CHAR two = inFirst[i + 2];
-			const unsigned char left = URI_FUNC(HexdigToInt)(one);
-			const unsigned char right = URI_FUNC(HexdigToInt)(two);
-			const int code = 16 * left + right;
-			if (uriIsUnreserved(code)) {
-				write[0] = (URI_CHAR)(code);
-				write++;
-			} else {
-				/* 6.2.2.1 Case Normalization: *
-				 * lowercase percent-encodings */
-				write[0] = _UT('%');
-				write[1] = URI_FUNC(HexToLetter)(left);
-				write[2] = URI_FUNC(HexToLetter)(right);
-				write += 3;
-			}
-
-			i += 2; /* For the two chars of the percent group we just ate */
-		}
-	}
-
-	/* Last two */
-	for (; i < lenInChars; i++) {
-		write[0] = inFirst[i];
-		write++;
-	}
-
-	*outAfterLast = write;
-}
-
-
-
-static URI_INLINE void URI_FUNC(FixPercentEncodingInplace)(const URI_CHAR * first,
-		const URI_CHAR ** afterLast) {
-	/* Death checks */
-	if ((first == NULL) || (afterLast == NULL) || (*afterLast == NULL)) {
-		return;
-	}
-
-	/* Fix inplace */
-	URI_FUNC(FixPercentEncodingEngine)(first, *afterLast, first, afterLast);
-}
-
-
-
-static URI_INLINE UriBool URI_FUNC(FixPercentEncodingMalloc)(const URI_CHAR ** first,
-		const URI_CHAR ** afterLast) {
-	int lenInChars;
-	URI_CHAR * buffer;
-
-	/* Death checks */
-	if ((first == NULL) || (afterLast == NULL) || (*first == NULL)
-		|| (*afterLast == NULL)) {
-		return URI_FALSE;
-	}
-
-	/* Old text length */
-	lenInChars = (int)(*afterLast - *first);
-	if (lenInChars == 0) {
-		return URI_TRUE;
-	} else if (lenInChars < 0) {
-		return URI_FALSE;
-	}
-
-	/* New buffer */
-	buffer = malloc(lenInChars * sizeof(URI_CHAR));
-	if (buffer == NULL) {
-		return URI_FALSE;
-	}
-
-	/* Fix on copy */
-	URI_FUNC(FixPercentEncodingEngine)(*first, *afterLast, buffer, afterLast);
-	*first = buffer;
-	return URI_TRUE;
-}
-
-
-
-static URI_INLINE UriBool URI_FUNC(MakeRangeOwner)(unsigned int * doneMask,
-		unsigned int maskTest, URI_TYPE(TextRange) * range) {
-	if (((*doneMask & maskTest) == 0)
-			&& (range->first != NULL)
-			&& (range->afterLast != NULL)
-			&& (range->afterLast > range->first)) {
-		const int lenInChars = (int)(range->afterLast - range->first);
-		const int lenInBytes = lenInChars * sizeof(URI_CHAR);
-		URI_CHAR * dup = malloc(lenInBytes);
-		if (dup == NULL) {
-			return URI_FALSE; /* Raises malloc error */
-		}
-		memcpy(dup, range->afterLast, lenInBytes);
-		range->first = dup;
-		range->afterLast = dup + lenInChars;
-		*doneMask |= maskTest;
-	}
-	return URI_TRUE;
-}
-
-
-
-static URI_INLINE UriBool URI_FUNC(MakeOwner)(URI_TYPE(Uri) * uri,
-		unsigned int * doneMask) {
-	URI_TYPE(PathSegment) * walker = uri->pathHead;
-	if (!URI_FUNC(MakeRangeOwner)(doneMask, URI_NORMALIZE_SCHEME,
-				&(uri->scheme))
-			|| !URI_FUNC(MakeRangeOwner)(doneMask, URI_NORMALIZE_USER_INFO,
-				&(uri->userInfo))
-			|| !URI_FUNC(MakeRangeOwner)(doneMask, URI_NORMALIZE_QUERY,
-				&(uri->query))
-			|| !URI_FUNC(MakeRangeOwner)(doneMask, URI_NORMALIZE_FRAGMENT,
-				&(uri->fragment))) {
-		return URI_FALSE; /* Raises malloc error */
-	}
-
-	/* Host */
-	if ((*doneMask & URI_NORMALIZE_HOST) == 0) {
-		if ((uri->hostData.ip4 == NULL)
-				&& (uri->hostData.ip6 == NULL)) {
-			if (uri->hostData.ipFuture.first != NULL) {
-				/* IPvFuture */
-				if (!URI_FUNC(MakeRangeOwner)(doneMask, URI_NORMALIZE_HOST,
-						&(uri->hostData.ipFuture))) {
-					return URI_FALSE; /* Raises malloc error */
-				}
-				uri->hostText.first = uri->hostData.ipFuture.first;
-				uri->hostText.afterLast = uri->hostData.ipFuture.afterLast;
-			} else if (uri->hostText.first != NULL) {
-				/* Regname */
-				if (!URI_FUNC(MakeRangeOwner)(doneMask, URI_NORMALIZE_HOST,
-						&(uri->hostText))) {
-					return URI_FALSE; /* Raises malloc error */
-				}
-			}
-		}
-	}
-
-	/* Path */
-	if ((*doneMask & URI_NORMALIZE_PATH) == 0) {
-		while (walker != NULL) {
-			if (!URI_FUNC(MakeRangeOwner)(doneMask, 0, &(walker->text))) {
-				/* Kill path to one before walker */
-				URI_TYPE(PathSegment) * ranger = uri->pathHead;
-				while (ranger->next != walker) {
-					URI_TYPE(PathSegment) * const next = ranger->next;
-					if ((ranger->text.first != NULL)
-							&& (ranger->text.afterLast != NULL)
-							&& (ranger->text.afterLast > ranger->text.first)) {
-						free((URI_CHAR *)ranger->text.first);
-						free(ranger);
-					}
-					ranger = next;
-				}
-
-				/* Kill path from walker */
-				while (walker != NULL) {
-					URI_TYPE(PathSegment) * const next = walker->next;
-					free(walker);
-					walker = next;
-				}
-
-				uri->pathHead = NULL;
-				uri->pathTail = NULL;
-				return URI_FALSE; /* Raises malloc error */
-			}
-			walker = walker->next;
-		}
-		*doneMask |= URI_NORMALIZE_PATH;
-	}
-
-	/* Port text, must come last so we don't have to undo that one if it fails. *
-	 * Otherwise we would need and extra enum flag for it althoug the port      *
-	 * cannot go unnormalized...                                                */
-	if (!URI_FUNC(MakeRangeOwner)(doneMask, 0, &(uri->userInfo))) {
-		return URI_FALSE; /* Raises malloc error */
-	}
-
-	return URI_TRUE;
-}
-
-
-
-unsigned int URI_FUNC(NormalizeSyntaxMaskRequired)(const URI_TYPE(Uri) * uri) {
-	unsigned int res;
-	URI_FUNC(NormalizeSyntaxEngine)((URI_TYPE(Uri) *)uri, 0, &res);
-	return res;
-}
-
-
-
-int URI_FUNC(NormalizeSyntaxEx)(URI_TYPE(Uri) * uri, unsigned int mask) {
-	return URI_FUNC(NormalizeSyntaxEngine)(uri, mask, NULL);
-}
-
-
-
-int URI_FUNC(NormalizeSyntax)(URI_TYPE(Uri) * uri) {
-	return URI_FUNC(NormalizeSyntaxEx)(uri, (unsigned int)-1);
-}
-
-
-
-static URI_INLINE int URI_FUNC(NormalizeSyntaxEngine)(URI_TYPE(Uri) * uri, unsigned int inMask, unsigned int * outMask) {
-	unsigned int doneMask = URI_NORMALIZED;
-	if (uri == NULL) {
-		if (outMask != NULL) {
-			*outMask = URI_NORMALIZED;
-			return URI_SUCCESS;
-		} else {
-			return URI_ERROR_NULL;
-		}
-	}
-
-	if (outMask != NULL) {
-		/* Reset mask */
-		*outMask = URI_NORMALIZED;
-	} else if (inMask == URI_NORMALIZED) {
-		/* Nothing to do */
-		return URI_SUCCESS;
-	} else if ((uri->scheme.first == NULL) && !uri->absolutePath) {
-		/* Normalization only fone for absolute paths */
-		return URI_SUCCESS;
-	}
-
-	/* Scheme, host */
-	if (outMask != NULL) {
-		const UriBool normalizeScheme = URI_FUNC(ContainsUppercaseLetters)(
-				uri->scheme.first, uri->scheme.afterLast);
-		const UriBool normalizeHost = URI_FUNC(ContainsUppercaseLetters)(
-			uri->hostText.first, uri->hostText.afterLast);
-		if (normalizeScheme) {
-			*outMask |= URI_NORMALIZE_SCHEME;
-		}
-
-		if (normalizeHost) {
-			*outMask |= URI_NORMALIZE_HOST;
-		}
-	} else {
-		/* Scheme */
-		if ((inMask & URI_NORMALIZE_SCHEME) && (uri->scheme.first != NULL)) {
-			if (uri->owner) {
-				URI_FUNC(LowercaseInplace)(uri->scheme.first, uri->scheme.afterLast);
-			} else {
-				if (!URI_FUNC(LowercaseMalloc)(&(uri->scheme.first), &(uri->scheme.afterLast))) {
-					URI_FUNC(PreventLeakage)(uri, doneMask);
-					return URI_ERROR_MALLOC;
-				}
-				doneMask |= URI_NORMALIZE_SCHEME;
-			}
-		}
-
-		/* Host */
-		if (inMask & URI_NORMALIZE_HOST) {
-			if (uri->hostData.ipFuture.first != NULL) {
-				/* IPvFuture */
-				if (uri->owner) {
-					URI_FUNC(LowercaseInplace)(uri->hostData.ipFuture.first,
-							uri->hostData.ipFuture.afterLast);
-				} else {
-					if (!URI_FUNC(LowercaseMalloc)(&(uri->hostData.ipFuture.first),
-							&(uri->hostData.ipFuture.afterLast))) {
-						URI_FUNC(PreventLeakage)(uri, doneMask);
-						return URI_ERROR_MALLOC;
-					}
-					doneMask |= URI_NORMALIZE_HOST;
-				}
-				uri->hostText.first = uri->hostData.ipFuture.first;
-				uri->hostText.afterLast = uri->hostData.ipFuture.afterLast;
-			} else if ((uri->hostText.first != NULL)
-					&& (uri->hostData.ip4 == NULL)
-					&& (uri->hostData.ip6 == NULL)) {
-				/* Regname */
-				if (uri->owner) {
-					URI_FUNC(LowercaseInplace)(uri->hostText.first,
-							uri->hostText.afterLast);
-				} else {
-					if (!URI_FUNC(LowercaseMalloc)(&(uri->hostText.first),
-							&(uri->hostText.afterLast))) {
-						URI_FUNC(PreventLeakage)(uri, doneMask);
-						return URI_ERROR_MALLOC;
-					}
-					doneMask |= URI_NORMALIZE_HOST;
-				}
-			}
-		}
-	}
-
-	/* User info */
-	if (outMask != NULL) {
-		const UriBool normalizeUserInfo = URI_FUNC(ContainsUglyPercentEncoding)(
-			uri->userInfo.first, uri->userInfo.afterLast);
-		if (normalizeUserInfo) {
-			*outMask |= URI_NORMALIZE_USER_INFO;
-		}
-	} else {
-		if ((inMask & URI_NORMALIZE_USER_INFO) && (uri->userInfo.first != NULL)) {
-			if (uri->owner) {
-				URI_FUNC(FixPercentEncodingInplace)(uri->userInfo.first, &(uri->userInfo.afterLast));
-			} else {
-				if (!URI_FUNC(FixPercentEncodingMalloc)(&(uri->userInfo.first),
-						&(uri->userInfo.afterLast))) {
-					URI_FUNC(PreventLeakage)(uri, doneMask);
-					return URI_ERROR_MALLOC;
-				}
-				doneMask |= URI_NORMALIZE_USER_INFO;
-			}
-		}
-	}
-
-	/* Path */
-	if (outMask != NULL) {
-		const URI_TYPE(PathSegment) * walker = uri->pathHead;
-		while (walker != NULL) {
-			const URI_CHAR * const first = walker->text.first;
-			const URI_CHAR * const afterLast = walker->text.afterLast;
-			if ((first != NULL)
-					&& (afterLast != NULL)
-					&& (afterLast > first)
-					&& (
-						(((afterLast - first) == 1)
-							&& (first[0] == _UT('.')))
-						||
-						(((afterLast - first) == 2)
-							&& (first[0] == _UT('.'))
-							&& (first[1] == _UT('.')))
-						||
-						URI_FUNC(ContainsUglyPercentEncoding)(first, afterLast)
-					)) {
-				*outMask |= URI_NORMALIZE_PATH;
-				break;
-			}
-			walker = walker->next;
-		}
-	} else {
-		const URI_TYPE(PathSegment) * walker;
-
-		/* 6.2.2.3 Path Segment Normalization */
-		if (!URI_FUNC(RemoveDotSegments)(uri)) {
-			URI_FUNC(PreventLeakage)(uri, doneMask);
-			return URI_ERROR_MALLOC;
-		}
-
-		/* Fix percent-encoding for each segment */
-		walker = uri->pathHead;
-		if (uri->owner) {
-			while (walker != NULL) {
-				URI_FUNC(FixPercentEncodingInplace)(walker->text.first, &(walker->text.afterLast));
-				walker = walker->next;
-			}
-		} else {
-			while (walker != NULL) {
-				if (!URI_FUNC(FixPercentEncodingMalloc)(&(walker->text.first),
-						&(walker->text.afterLast))) {
-					URI_FUNC(PreventLeakage)(uri, doneMask);
-					return URI_ERROR_MALLOC;
-				}
-				walker = walker->next;
-			}
-			doneMask |= URI_NORMALIZE_PATH;
-		}
-	}
-
-	/* Query, fragment */
-	if (outMask != NULL) {
-		const UriBool normalizeQuery = URI_FUNC(ContainsUglyPercentEncoding)(
-				uri->query.first, uri->query.afterLast);
-		const UriBool normalizeFragment = URI_FUNC(ContainsUglyPercentEncoding)(
-				uri->fragment.first, uri->fragment.afterLast);
-		if (normalizeQuery) {
-			*outMask |= URI_NORMALIZE_QUERY;
-		}
-
-		if (normalizeFragment) {
-			*outMask |= URI_NORMALIZE_FRAGMENT;
-		}
-	} else {
-		/* Query */
-		if ((inMask & URI_NORMALIZE_QUERY) && (uri->query.first != NULL)) {
-			if (uri->owner) {
-				URI_FUNC(FixPercentEncodingInplace)(uri->query.first, &(uri->query.afterLast));
-			} else {
-				if (!URI_FUNC(FixPercentEncodingMalloc)(&(uri->query.first),
-						&(uri->query.afterLast))) {
-					URI_FUNC(PreventLeakage)(uri, doneMask);
-					return URI_ERROR_MALLOC;
-				}
-				doneMask |= URI_NORMALIZE_QUERY;
-			}
-		}
-
-		/* Fragment */
-		if ((inMask & URI_NORMALIZE_FRAGMENT) && (uri->fragment.first != NULL)) {
-			if (uri->owner) {
-				URI_FUNC(FixPercentEncodingInplace)(uri->fragment.first, &(uri->fragment.afterLast));
-			} else {
-				if (!URI_FUNC(FixPercentEncodingMalloc)(&(uri->fragment.first),
-						&(uri->fragment.afterLast))) {
-					URI_FUNC(PreventLeakage)(uri, doneMask);
-					return URI_ERROR_MALLOC;
-				}
-				doneMask |= URI_NORMALIZE_FRAGMENT;
-			}
-		}
-	}
-
-	/* Dup all not duped yet */
-	if ((outMask == NULL) && !uri->owner) {
-		if (!URI_FUNC(MakeOwner)(uri, &doneMask)) {
-			URI_FUNC(PreventLeakage)(uri, doneMask);
-			return URI_ERROR_MALLOC;
-		}
-		uri->owner = URI_TRUE;
-	}
-
-	return URI_SUCCESS;
-}
-
-
-
-#endif
+/*
+ * uriparser - RFC 3986 URI parsing library
+ *
+ * Copyright (C) 2007, Weijia Song <songweijia@gmail.com>
+ * Copyright (C) 2007, Sebastian Pipping <webmaster@hartwork.org>
+ * All rights reserved.
+ *
+ * Redistribution  and use in source and binary forms, with or without
+ * modification,  are permitted provided that the following conditions
+ * are met:
+ *
+ *     * Redistributions   of  source  code  must  retain  the   above
+ *       copyright  notice, this list of conditions and the  following
+ *       disclaimer.
+ *
+ *     * Redistributions  in  binary  form must  reproduce  the  above
+ *       copyright  notice, this list of conditions and the  following
+ *       disclaimer   in  the  documentation  and/or  other  materials
+ *       provided with the distribution.
+ *
+ *     * Neither  the name of the <ORGANIZATION> nor the names of  its
+ *       contributors  may  be  used to endorse  or  promote  products
+ *       derived  from  this software without specific  prior  written
+ *       permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS  IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT  NOT
+ * LIMITED  TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND  FITNESS
+ * FOR  A  PARTICULAR  PURPOSE ARE DISCLAIMED. IN NO EVENT  SHALL  THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL,    SPECIAL,   EXEMPLARY,   OR   CONSEQUENTIAL   DAMAGES
+ * (INCLUDING,  BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES;  LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT  LIABILITY,  OR  TORT (INCLUDING  NEGLIGENCE  OR  OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/**
+ * @file UriNormalize.c
+ * Holds the RFC 3986 %URI normalization implementation.
+ * NOTE: This source file includes itself twice.
+ */
+
+/* What encodings are enabled? */
+#include <uriparser/UriDefsConfig.h>
+#if (!defined(URI_PASS_ANSI) && !defined(URI_PASS_UNICODE))
+/* Include SELF twice */
+# define URI_PASS_ANSI 1
+# include "UriNormalize.c"
+# undef URI_PASS_ANSI
+# define URI_PASS_UNICODE 1
+# include "UriNormalize.c"
+# undef URI_PASS_UNICODE
+#else
+# ifdef URI_PASS_ANSI
+#  include <uriparser/UriDefsAnsi.h>
+# else
+#  include <uriparser/UriDefsUnicode.h>
+#  include <wchar.h>
+# endif
+
+
+
+#ifndef URI_DOXYGEN
+# include <uriparser/Uri.h>
+# include "UriNormalizeBase.h"
+# include "UriCommon.h"
+#endif
+
+
+
+static int URI_FUNC(NormalizeSyntaxEngine)(URI_TYPE(Uri) * uri, unsigned int inMask,
+		unsigned int * outMask);
+
+static UriBool URI_FUNC(MakeRangeOwner)(unsigned int * doneMask,
+		unsigned int maskTest, URI_TYPE(TextRange) * range);
+static UriBool URI_FUNC(MakeOwner)(URI_TYPE(Uri) * uri,
+		unsigned int * doneMask);
+
+static void URI_FUNC(FixPercentEncodingInplace)(const URI_CHAR * first,
+		const URI_CHAR ** afterLast);
+static UriBool URI_FUNC(FixPercentEncodingMalloc)(const URI_CHAR ** first,
+		const URI_CHAR ** afterLast);
+static void URI_FUNC(FixPercentEncodingEngine)(
+		const URI_CHAR * inFirst, const URI_CHAR * inAfterLast,
+		const URI_CHAR * outFirst, const URI_CHAR ** outAfterLast);
+
+static UriBool URI_FUNC(ContainsUppercaseLetters)(const URI_CHAR * first,
+		const URI_CHAR * afterLast);
+static UriBool URI_FUNC(ContainsUglyPercentEncoding)(const URI_CHAR * first,
+		const URI_CHAR * afterLast);
+
+static void URI_FUNC(LowercaseInplace)(const URI_CHAR * first,
+		const URI_CHAR * afterLast);
+static UriBool URI_FUNC(LowercaseMalloc)(const URI_CHAR ** first,
+		const URI_CHAR ** afterLast);
+
+static void URI_FUNC(PreventLeakage)(URI_TYPE(Uri) * uri,
+		unsigned int revertMask);
+
+
+
+static URI_INLINE void URI_FUNC(PreventLeakage)(URI_TYPE(Uri) * uri,
+		unsigned int revertMask) {
+	if (revertMask & URI_NORMALIZE_SCHEME) {
+		free((URI_CHAR *)uri->scheme.first);
+		uri->scheme.first = NULL;
+		uri->scheme.afterLast = NULL;
+	}
+
+	if (revertMask & URI_NORMALIZE_USER_INFO) {
+		free((URI_CHAR *)uri->userInfo.first);
+		uri->userInfo.first = NULL;
+		uri->userInfo.afterLast = NULL;
+	}
+
+	if (revertMask & URI_NORMALIZE_HOST) {
+		if (uri->hostData.ipFuture.first != NULL) {
+			/* IPvFuture */
+			free((URI_CHAR *)uri->hostData.ipFuture.first);
+			uri->hostData.ipFuture.first = NULL;
+			uri->hostData.ipFuture.afterLast = NULL;
+			uri->hostText.first = NULL;
+			uri->hostText.afterLast = NULL;
+		} else if ((uri->hostText.first != NULL)
+				&& (uri->hostData.ip4 == NULL)
+				&& (uri->hostData.ip6 == NULL)) {
+			/* Regname */
+			free((URI_CHAR *)uri->hostText.first);
+			uri->hostText.first = NULL;
+			uri->hostText.afterLast = NULL;
+		}
+	}
+
+	/* NOTE: Port cannot happen! */
+
+	if (revertMask & URI_NORMALIZE_PATH) {
+		URI_TYPE(PathSegment) * walker = uri->pathHead;
+		while (walker != NULL) {
+			URI_TYPE(PathSegment) * const next = walker->next;
+			if (walker->text.afterLast > walker->text.first) {
+				free((URI_CHAR *)walker->text.first);
+			}
+			free(walker);
+			walker = next;
+		}
+		uri->pathHead = NULL;
+		uri->pathTail = NULL;
+	}
+
+	if (revertMask & URI_NORMALIZE_QUERY) {
+		free((URI_CHAR *)uri->query.first);
+		uri->query.first = NULL;
+		uri->query.afterLast = NULL;
+	}
+
+	if (revertMask & URI_NORMALIZE_FRAGMENT) {
+		free((URI_CHAR *)uri->fragment.first);
+		uri->fragment.first = NULL;
+		uri->fragment.afterLast = NULL;
+	}
+}
+
+
+
+static URI_INLINE UriBool URI_FUNC(ContainsUppercaseLetters)(const URI_CHAR * first,
+		const URI_CHAR * afterLast) {
+	if ((first != NULL) && (afterLast != NULL) && (afterLast > first)) {
+		const URI_CHAR * i = first;
+		for (; i < afterLast; i++) {
+			/* 6.2.2.1 Case Normalization: uppercase letters in scheme or host */
+			if ((*i >= _UT('A')) && (*i <= _UT('Z'))) {
+				return URI_TRUE;
+			}
+		}
+	}
+	return URI_FALSE;
+}
+
+
+
+static URI_INLINE UriBool URI_FUNC(ContainsUglyPercentEncoding)(const URI_CHAR * first,
+		const URI_CHAR * afterLast) {
+	if ((first != NULL) && (afterLast != NULL) && (afterLast > first)) {
+		const URI_CHAR * i = first;
+		for (; i + 2 < afterLast; i++) {
+			if (i[0] == _UT('%')) {
+				/* 6.2.2.1 Case Normalization: *
+				 * lowercase percent-encodings */
+				if (((i[1] >= _UT('a')) && (i[1] <= _UT('f')))
+						|| ((i[2] >= _UT('a')) && (i[2] <= _UT('f')))) {
+					return URI_TRUE;
+				} else {
+					/* 6.2.2.2 Percent-Encoding Normalization: *
+					 * percent-encoded unreserved characters   */
+					const unsigned char left = URI_FUNC(HexdigToInt)(i[1]);
+					const unsigned char right = URI_FUNC(HexdigToInt)(i[2]);
+					const int code = 16 * left + right;
+					if (uriIsUnreserved(code)) {
+						return URI_TRUE;
+					}
+				}
+			}
+		}
+	}
+	return URI_FALSE;
+}
+
+
+
+static URI_INLINE void URI_FUNC(LowercaseInplace)(const URI_CHAR * first,
+		const URI_CHAR * afterLast) {
+	if ((first != NULL) && (afterLast != NULL) && (afterLast > first)) {
+		URI_CHAR * i = (URI_CHAR *)first;
+		const int lowerUpperDiff = (_UT('a') - _UT('A'));
+		for (; i < afterLast; i++) {
+			if ((*i >= _UT('A')) && (*i <=_UT('Z'))) {
+				*i = (URI_CHAR)(*i + lowerUpperDiff);
+			}
+		}
+	}
+}
+
+
+
+static URI_INLINE UriBool URI_FUNC(LowercaseMalloc)(const URI_CHAR ** first,
+		const URI_CHAR ** afterLast) {
+	int lenInChars;
+	const int lowerUpperDiff = (_UT('a') - _UT('A'));
+	URI_CHAR * buffer;
+	int i = 0;
+
+	if ((first == NULL) || (afterLast == NULL) || (*first == NULL)
+			|| (*afterLast == NULL)) {
+		return URI_FALSE;
+	}
+
+	lenInChars = (int)(*afterLast - *first);
+	if (lenInChars == 0) {
+		return URI_TRUE;
+	} else if (lenInChars < 0) {
+		return URI_FALSE;
+	}
+
+	buffer = malloc(lenInChars * sizeof(URI_CHAR));
+	if (buffer == NULL) {
+		return URI_FALSE;
+	}
+
+	for (; i < lenInChars; i++) {
+		if (((*first)[i] >= _UT('A')) && ((*first)[i] <=_UT('Z'))) {
+			buffer[i] = (URI_CHAR)((*first)[i] + lowerUpperDiff);
+		} else {
+			buffer[i] = (*first)[i];
+		}
+	}
+
+	*first = buffer;
+	*afterLast = buffer + lenInChars;
+	return URI_TRUE;
+}
+
+
+
+/* NOTE: Implementation must stay inplace-compatible */
+static URI_INLINE void URI_FUNC(FixPercentEncodingEngine)(
+		const URI_CHAR * inFirst, const URI_CHAR * inAfterLast,
+		const URI_CHAR * outFirst, const URI_CHAR ** outAfterLast) {
+	URI_CHAR * write = (URI_CHAR *)outFirst;
+	const int lenInChars = (int)(inAfterLast - inFirst);
+	int i = 0;
+
+	/* All but last two */
+	for (; i + 2 < lenInChars; i++) {
+		if (inFirst[i] != _UT('%')) {
+			write[0] = inFirst[i];
+			write++;
+		} else {
+			/* 6.2.2.2 Percent-Encoding Normalization: *
+			 * percent-encoded unreserved characters   */
+			const URI_CHAR one = inFirst[i + 1];
+			const URI_CHAR two = inFirst[i + 2];
+			const unsigned char left = URI_FUNC(HexdigToInt)(one);
+			const unsigned char right = URI_FUNC(HexdigToInt)(two);
+			const int code = 16 * left + right;
+			if (uriIsUnreserved(code)) {
+				write[0] = (URI_CHAR)(code);
+				write++;
+			} else {
+				/* 6.2.2.1 Case Normalization: *
+				 * lowercase percent-encodings */
+				write[0] = _UT('%');
+				write[1] = URI_FUNC(HexToLetter)(left);
+				write[2] = URI_FUNC(HexToLetter)(right);
+				write += 3;
+			}
+
+			i += 2; /* For the two chars of the percent group we just ate */
+		}
+	}
+
+	/* Last two */
+	for (; i < lenInChars; i++) {
+		write[0] = inFirst[i];
+		write++;
+	}
+
+	*outAfterLast = write;
+}
+
+
+
+static URI_INLINE void URI_FUNC(FixPercentEncodingInplace)(const URI_CHAR * first,
+		const URI_CHAR ** afterLast) {
+	/* Death checks */
+	if ((first == NULL) || (afterLast == NULL) || (*afterLast == NULL)) {
+		return;
+	}
+
+	/* Fix inplace */
+	URI_FUNC(FixPercentEncodingEngine)(first, *afterLast, first, afterLast);
+}
+
+
+
+static URI_INLINE UriBool URI_FUNC(FixPercentEncodingMalloc)(const URI_CHAR ** first,
+		const URI_CHAR ** afterLast) {
+	int lenInChars;
+	URI_CHAR * buffer;
+
+	/* Death checks */
+	if ((first == NULL) || (afterLast == NULL)
+			|| (*first == NULL) || (*afterLast == NULL)) {
+		return URI_FALSE;
+	}
+
+	/* Old text length */
+	lenInChars = (int)(*afterLast - *first);
+	if (lenInChars == 0) {
+		return URI_TRUE;
+	} else if (lenInChars < 0) {
+		return URI_FALSE;
+	}
+
+	/* New buffer */
+	buffer = malloc(lenInChars * sizeof(URI_CHAR));
+	if (buffer == NULL) {
+		return URI_FALSE;
+	}
+
+	/* Fix on copy */
+	URI_FUNC(FixPercentEncodingEngine)(*first, *afterLast, buffer, afterLast);
+	*first = buffer;
+	return URI_TRUE;
+}
+
+
+
+static URI_INLINE UriBool URI_FUNC(MakeRangeOwner)(unsigned int * doneMask,
+		unsigned int maskTest, URI_TYPE(TextRange) * range) {
+	if (((*doneMask & maskTest) == 0)
+			&& (range->first != NULL)
+			&& (range->afterLast != NULL)
+			&& (range->afterLast > range->first)) {
+		const int lenInChars = (int)(range->afterLast - range->first);
+		const int lenInBytes = lenInChars * sizeof(URI_CHAR);
+		URI_CHAR * dup = malloc(lenInBytes);
+		if (dup == NULL) {
+			return URI_FALSE; /* Raises malloc error */
+		}
+		memcpy(dup, range->first, lenInBytes);
+		range->first = dup;
+		range->afterLast = dup + lenInChars;
+		*doneMask |= maskTest;
+	}
+	return URI_TRUE;
+}
+
+
+
+static URI_INLINE UriBool URI_FUNC(MakeOwner)(URI_TYPE(Uri) * uri,
+		unsigned int * doneMask) {
+	URI_TYPE(PathSegment) * walker = uri->pathHead;
+	if (!URI_FUNC(MakeRangeOwner)(doneMask, URI_NORMALIZE_SCHEME,
+				&(uri->scheme))
+			|| !URI_FUNC(MakeRangeOwner)(doneMask, URI_NORMALIZE_USER_INFO,
+				&(uri->userInfo))
+			|| !URI_FUNC(MakeRangeOwner)(doneMask, URI_NORMALIZE_QUERY,
+				&(uri->query))
+			|| !URI_FUNC(MakeRangeOwner)(doneMask, URI_NORMALIZE_FRAGMENT,
+				&(uri->fragment))) {
+		return URI_FALSE; /* Raises malloc error */
+	}
+
+	/* Host */
+	if ((*doneMask & URI_NORMALIZE_HOST) == 0) {
+		if ((uri->hostData.ip4 == NULL)
+				&& (uri->hostData.ip6 == NULL)) {
+			if (uri->hostData.ipFuture.first != NULL) {
+				/* IPvFuture */
+				if (!URI_FUNC(MakeRangeOwner)(doneMask, URI_NORMALIZE_HOST,
+						&(uri->hostData.ipFuture))) {
+					return URI_FALSE; /* Raises malloc error */
+				}
+				uri->hostText.first = uri->hostData.ipFuture.first;
+				uri->hostText.afterLast = uri->hostData.ipFuture.afterLast;
+			} else if (uri->hostText.first != NULL) {
+				/* Regname */
+				if (!URI_FUNC(MakeRangeOwner)(doneMask, URI_NORMALIZE_HOST,
+						&(uri->hostText))) {
+					return URI_FALSE; /* Raises malloc error */
+				}
+			}
+		}
+	}
+
+	/* Path */
+	if ((*doneMask & URI_NORMALIZE_PATH) == 0) {
+		while (walker != NULL) {
+			if (!URI_FUNC(MakeRangeOwner)(doneMask, 0, &(walker->text))) {
+				/* Kill path to one before walker */
+				URI_TYPE(PathSegment) * ranger = uri->pathHead;
+				while (ranger->next != walker) {
+					URI_TYPE(PathSegment) * const next = ranger->next;
+					if ((ranger->text.first != NULL)
+							&& (ranger->text.afterLast != NULL)
+							&& (ranger->text.afterLast > ranger->text.first)) {
+						free((URI_CHAR *)ranger->text.first);
+						free(ranger);
+					}
+					ranger = next;
+				}
+
+				/* Kill path from walker */
+				while (walker != NULL) {
+					URI_TYPE(PathSegment) * const next = walker->next;
+					free(walker);
+					walker = next;
+				}
+
+				uri->pathHead = NULL;
+				uri->pathTail = NULL;
+				return URI_FALSE; /* Raises malloc error */
+			}
+			walker = walker->next;
+		}
+		*doneMask |= URI_NORMALIZE_PATH;
+	}
+
+	/* Port text, must come last so we don't have to undo that one if it fails. *
+	 * Otherwise we would need and extra enum flag for it although the port      *
+	 * cannot go unnormalized...                                                */
+	if (!URI_FUNC(MakeRangeOwner)(doneMask, 0, &(uri->portText))) {
+		return URI_FALSE; /* Raises malloc error */
+	}
+
+	return URI_TRUE;
+}
+
+
+
+unsigned int URI_FUNC(NormalizeSyntaxMaskRequired)(const URI_TYPE(Uri) * uri) {
+	unsigned int res;
+#if defined(__GNUC__) && ((__GNUC__ > 4) \
+        || ((__GNUC__ == 4) && defined(__GNUC_MINOR__) && (__GNUC_MINOR__ >= 2)))
+    /* Slower code that fixes a warning, not sure if this is a smart idea */
+	URI_TYPE(Uri) writeableClone;
+	memcpy(&writeableClone, uri, 1 * sizeof(URI_TYPE(Uri)));
+	URI_FUNC(NormalizeSyntaxEngine)(&writeableClone, 0, &res);
+#else
+	URI_FUNC(NormalizeSyntaxEngine)((URI_TYPE(Uri) *)uri, 0, &res);
+#endif
+	return res;
+}
+
+
+
+int URI_FUNC(NormalizeSyntaxEx)(URI_TYPE(Uri) * uri, unsigned int mask) {
+	return URI_FUNC(NormalizeSyntaxEngine)(uri, mask, NULL);
+}
+
+
+
+int URI_FUNC(NormalizeSyntax)(URI_TYPE(Uri) * uri) {
+	return URI_FUNC(NormalizeSyntaxEx)(uri, (unsigned int)-1);
+}
+
+
+
+static URI_INLINE int URI_FUNC(NormalizeSyntaxEngine)(URI_TYPE(Uri) * uri, unsigned int inMask, unsigned int * outMask) {
+	unsigned int doneMask = URI_NORMALIZED;
+	if (uri == NULL) {
+		if (outMask != NULL) {
+			*outMask = URI_NORMALIZED;
+			return URI_SUCCESS;
+		} else {
+			return URI_ERROR_NULL;
+		}
+	}
+
+	if (outMask != NULL) {
+		/* Reset mask */
+		*outMask = URI_NORMALIZED;
+	} else if (inMask == URI_NORMALIZED) {
+		/* Nothing to do */
+		return URI_SUCCESS;
+	}
+
+	/* Scheme, host */
+	if (outMask != NULL) {
+		const UriBool normalizeScheme = URI_FUNC(ContainsUppercaseLetters)(
+				uri->scheme.first, uri->scheme.afterLast);
+		const UriBool normalizeHostCase = URI_FUNC(ContainsUppercaseLetters)(
+			uri->hostText.first, uri->hostText.afterLast);
+		if (normalizeScheme) {
+			*outMask |= URI_NORMALIZE_SCHEME;
+		}
+
+		if (normalizeHostCase) {
+			*outMask |= URI_NORMALIZE_HOST;
+		} else {
+			const UriBool normalizeHostPrecent = URI_FUNC(ContainsUglyPercentEncoding)(
+					uri->hostText.first, uri->hostText.afterLast);
+			if (normalizeHostPrecent) {
+				*outMask |= URI_NORMALIZE_HOST;
+			}
+		}
+	} else {
+		/* Scheme */
+		if ((inMask & URI_NORMALIZE_SCHEME) && (uri->scheme.first != NULL)) {
+			if (uri->owner) {
+				URI_FUNC(LowercaseInplace)(uri->scheme.first, uri->scheme.afterLast);
+			} else {
+				if (!URI_FUNC(LowercaseMalloc)(&(uri->scheme.first), &(uri->scheme.afterLast))) {
+					URI_FUNC(PreventLeakage)(uri, doneMask);
+					return URI_ERROR_MALLOC;
+				}
+				doneMask |= URI_NORMALIZE_SCHEME;
+			}
+		}
+
+		/* Host */
+		if (inMask & URI_NORMALIZE_HOST) {
+			if (uri->hostData.ipFuture.first != NULL) {
+				/* IPvFuture */
+				if (uri->owner) {
+					URI_FUNC(LowercaseInplace)(uri->hostData.ipFuture.first,
+							uri->hostData.ipFuture.afterLast);
+				} else {
+					if (!URI_FUNC(LowercaseMalloc)(&(uri->hostData.ipFuture.first),
+							&(uri->hostData.ipFuture.afterLast))) {
+						URI_FUNC(PreventLeakage)(uri, doneMask);
+						return URI_ERROR_MALLOC;
+					}
+					doneMask |= URI_NORMALIZE_HOST;
+				}
+				uri->hostText.first = uri->hostData.ipFuture.first;
+				uri->hostText.afterLast = uri->hostData.ipFuture.afterLast;
+			} else if ((uri->hostText.first != NULL)
+					&& (uri->hostData.ip4 == NULL)
+					&& (uri->hostData.ip6 == NULL)) {
+				/* Regname */
+				if (uri->owner) {
+					URI_FUNC(FixPercentEncodingInplace)(uri->hostText.first,
+							&(uri->hostText.afterLast));
+				} else {
+					if (!URI_FUNC(FixPercentEncodingMalloc)(
+							&(uri->hostText.first),
+							&(uri->hostText.afterLast))) {
+						URI_FUNC(PreventLeakage)(uri, doneMask);
+						return URI_ERROR_MALLOC;
+					}
+					doneMask |= URI_NORMALIZE_HOST;
+				}
+
+				URI_FUNC(LowercaseInplace)(uri->hostText.first,
+						uri->hostText.afterLast);
+			}
+		}
+	}
+
+	/* User info */
+	if (outMask != NULL) {
+		const UriBool normalizeUserInfo = URI_FUNC(ContainsUglyPercentEncoding)(
+			uri->userInfo.first, uri->userInfo.afterLast);
+		if (normalizeUserInfo) {
+			*outMask |= URI_NORMALIZE_USER_INFO;
+		}
+	} else {
+		if ((inMask & URI_NORMALIZE_USER_INFO) && (uri->userInfo.first != NULL)) {
+			if (uri->owner) {
+				URI_FUNC(FixPercentEncodingInplace)(uri->userInfo.first, &(uri->userInfo.afterLast));
+			} else {
+				if (!URI_FUNC(FixPercentEncodingMalloc)(&(uri->userInfo.first),
+						&(uri->userInfo.afterLast))) {
+					URI_FUNC(PreventLeakage)(uri, doneMask);
+					return URI_ERROR_MALLOC;
+				}
+				doneMask |= URI_NORMALIZE_USER_INFO;
+			}
+		}
+	}
+
+	/* Path */
+	if (outMask != NULL) {
+		const URI_TYPE(PathSegment) * walker = uri->pathHead;
+		while (walker != NULL) {
+			const URI_CHAR * const first = walker->text.first;
+			const URI_CHAR * const afterLast = walker->text.afterLast;
+			if ((first != NULL)
+					&& (afterLast != NULL)
+					&& (afterLast > first)
+					&& (
+						(((afterLast - first) == 1)
+							&& (first[0] == _UT('.')))
+						||
+						(((afterLast - first) == 2)
+							&& (first[0] == _UT('.'))
+							&& (first[1] == _UT('.')))
+						||
+						URI_FUNC(ContainsUglyPercentEncoding)(first, afterLast)
+					)) {
+				*outMask |= URI_NORMALIZE_PATH;
+				break;
+			}
+			walker = walker->next;
+		}
+	} else if (inMask & URI_NORMALIZE_PATH) {
+		URI_TYPE(PathSegment) * walker;
+		const UriBool relative = ((uri->scheme.first == NULL)
+				&& !uri->absolutePath) ? URI_TRUE : URI_FALSE;
+
+		/* Fix percent-encoding for each segment */
+		walker = uri->pathHead;
+		if (uri->owner) {
+			while (walker != NULL) {
+				URI_FUNC(FixPercentEncodingInplace)(walker->text.first, &(walker->text.afterLast));
+				walker = walker->next;
+			}
+		} else {
+			while (walker != NULL) {
+				if (!URI_FUNC(FixPercentEncodingMalloc)(&(walker->text.first),
+						&(walker->text.afterLast))) {
+					URI_FUNC(PreventLeakage)(uri, doneMask);
+					return URI_ERROR_MALLOC;
+				}
+				walker = walker->next;
+			}
+			doneMask |= URI_NORMALIZE_PATH;
+		}
+
+		/* 6.2.2.3 Path Segment Normalization */
+		if (!URI_FUNC(RemoveDotSegmentsEx)(uri, relative,
+				(uri->owner == URI_TRUE)
+				|| ((doneMask & URI_NORMALIZE_PATH) != 0)
+				)) {
+			URI_FUNC(PreventLeakage)(uri, doneMask);
+			return URI_ERROR_MALLOC;
+		}
+		URI_FUNC(FixEmptyTrailSegment)(uri);
+	}
+
+	/* Query, fragment */
+	if (outMask != NULL) {
+		const UriBool normalizeQuery = URI_FUNC(ContainsUglyPercentEncoding)(
+				uri->query.first, uri->query.afterLast);
+		const UriBool normalizeFragment = URI_FUNC(ContainsUglyPercentEncoding)(
+				uri->fragment.first, uri->fragment.afterLast);
+		if (normalizeQuery) {
+			*outMask |= URI_NORMALIZE_QUERY;
+		}
+
+		if (normalizeFragment) {
+			*outMask |= URI_NORMALIZE_FRAGMENT;
+		}
+	} else {
+		/* Query */
+		if ((inMask & URI_NORMALIZE_QUERY) && (uri->query.first != NULL)) {
+			if (uri->owner) {
+				URI_FUNC(FixPercentEncodingInplace)(uri->query.first, &(uri->query.afterLast));
+			} else {
+				if (!URI_FUNC(FixPercentEncodingMalloc)(&(uri->query.first),
+						&(uri->query.afterLast))) {
+					URI_FUNC(PreventLeakage)(uri, doneMask);
+					return URI_ERROR_MALLOC;
+				}
+				doneMask |= URI_NORMALIZE_QUERY;
+			}
+		}
+
+		/* Fragment */
+		if ((inMask & URI_NORMALIZE_FRAGMENT) && (uri->fragment.first != NULL)) {
+			if (uri->owner) {
+				URI_FUNC(FixPercentEncodingInplace)(uri->fragment.first, &(uri->fragment.afterLast));
+			} else {
+				if (!URI_FUNC(FixPercentEncodingMalloc)(&(uri->fragment.first),
+						&(uri->fragment.afterLast))) {
+					URI_FUNC(PreventLeakage)(uri, doneMask);
+					return URI_ERROR_MALLOC;
+				}
+				doneMask |= URI_NORMALIZE_FRAGMENT;
+			}
+		}
+	}
+
+	/* Dup all not duped yet */
+	if ((outMask == NULL) && !uri->owner) {
+		if (!URI_FUNC(MakeOwner)(uri, &doneMask)) {
+			URI_FUNC(PreventLeakage)(uri, doneMask);
+			return URI_ERROR_MALLOC;
+		}
+		uri->owner = URI_TRUE;
+	}
+
+	return URI_SUCCESS;
+}
+
+
+
+#endif
diff -Nru /tmp/bxdedfLB6u/uriparser-0.6.0/lib/UriParseBase.c /tmp/fLjZ2dz9P3/uriparser-0.7.4/lib/UriParseBase.c
--- uriparser-0.6.0/lib/UriParseBase.c	2007-07-27 06:37:43.000000000 +0100
+++ uriparser-0.7.4/lib/UriParseBase.c	2008-12-20 18:52:47.000000000 +0000
@@ -1,90 +1,90 @@
-/*
- * uriparser - RFC 3986 URI parsing library
- *
- * Copyright (C) 2007, Weijia Song <songweijia@gmail.com>
- * Copyright (C) 2007, Sebastian Pipping <webmaster@hartwork.org>
- * All rights reserved.
- *
- * Redistribution  and use in source and binary forms, with or without
- * modification,  are permitted provided that the following conditions
- * are met:
- *
- *     * Redistributions   of  source  code  must  retain  the   above
- *       copyright  notice, this list of conditions and the  following
- *       disclaimer.
- *
- *     * Redistributions  in  binary  form must  reproduce  the  above
- *       copyright  notice, this list of conditions and the  following
- *       disclaimer   in  the  documentation  and/or  other  materials
- *       provided with the distribution.
- *
- *     * Neither  the name of the <ORGANIZATION> nor the names of  its
- *       contributors  may  be  used to endorse  or  promote  products
- *       derived  from  this software without specific  prior  written
- *       permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS  IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT  NOT
- * LIMITED  TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND  FITNESS
- * FOR  A  PARTICULAR  PURPOSE ARE DISCLAIMED. IN NO EVENT  SHALL  THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL,    SPECIAL,   EXEMPLARY,   OR   CONSEQUENTIAL   DAMAGES
- * (INCLUDING,  BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES;  LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT  LIABILITY,  OR  TORT (INCLUDING  NEGLIGENCE  OR  OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-#ifndef URI_DOXYGEN
-# include "UriParseBase.h"
-#endif
-
-
-
-void uriWriteQuadToDoubleByte(const unsigned char * hexDigits, int digitCount, unsigned char * output) {
-	switch (digitCount) {
-	case 1:
-		/* 0x___? -> \x00 \x0? */
-		output[0] = 0;
-		output[1] = hexDigits[0];
-		break;
-
-	case 2:
-		/* 0x__?? -> \0xx \x?? */
-		output[0] = 0;
-		output[1] = 16 * hexDigits[0] + hexDigits[1];
-		break;
-
-	case 3:
-		/* 0x_??? -> \0x? \x?? */
-		output[0] = hexDigits[0];
-		output[1] = 16 * hexDigits[1] + hexDigits[2];
-		break;
-
-	case 4:
-		/* 0x???? -> \0?? \x?? */
-		output[0] = 16 * hexDigits[0] + hexDigits[1];
-		output[1] = 16 * hexDigits[2] + hexDigits[3];
-		break;
-
-	}
-}
-
-
-
-unsigned char uriGetOctetValue(const unsigned char * digits, int digitCount) {
-	switch (digitCount) {
-	case 1:
-		return digits[0];
-
-	case 2:
-		return 10 * digits[0] + digits[1];
-
-	case 3:
-	default:
-		return 100 * digits[0] + 10 * digits[1] + digits[2];
-
-	}
-}
+/*
+ * uriparser - RFC 3986 URI parsing library
+ *
+ * Copyright (C) 2007, Weijia Song <songweijia@gmail.com>
+ * Copyright (C) 2007, Sebastian Pipping <webmaster@hartwork.org>
+ * All rights reserved.
+ *
+ * Redistribution  and use in source and binary forms, with or without
+ * modification,  are permitted provided that the following conditions
+ * are met:
+ *
+ *     * Redistributions   of  source  code  must  retain  the   above
+ *       copyright  notice, this list of conditions and the  following
+ *       disclaimer.
+ *
+ *     * Redistributions  in  binary  form must  reproduce  the  above
+ *       copyright  notice, this list of conditions and the  following
+ *       disclaimer   in  the  documentation  and/or  other  materials
+ *       provided with the distribution.
+ *
+ *     * Neither  the name of the <ORGANIZATION> nor the names of  its
+ *       contributors  may  be  used to endorse  or  promote  products
+ *       derived  from  this software without specific  prior  written
+ *       permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS  IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT  NOT
+ * LIMITED  TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND  FITNESS
+ * FOR  A  PARTICULAR  PURPOSE ARE DISCLAIMED. IN NO EVENT  SHALL  THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL,    SPECIAL,   EXEMPLARY,   OR   CONSEQUENTIAL   DAMAGES
+ * (INCLUDING,  BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES;  LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT  LIABILITY,  OR  TORT (INCLUDING  NEGLIGENCE  OR  OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef URI_DOXYGEN
+# include "UriParseBase.h"
+#endif
+
+
+
+void uriWriteQuadToDoubleByte(const unsigned char * hexDigits, int digitCount, unsigned char * output) {
+	switch (digitCount) {
+	case 1:
+		/* 0x___? -> \x00 \x0? */
+		output[0] = 0;
+		output[1] = hexDigits[0];
+		break;
+
+	case 2:
+		/* 0x__?? -> \0xx \x?? */
+		output[0] = 0;
+		output[1] = 16 * hexDigits[0] + hexDigits[1];
+		break;
+
+	case 3:
+		/* 0x_??? -> \0x? \x?? */
+		output[0] = hexDigits[0];
+		output[1] = 16 * hexDigits[1] + hexDigits[2];
+		break;
+
+	case 4:
+		/* 0x???? -> \0?? \x?? */
+		output[0] = 16 * hexDigits[0] + hexDigits[1];
+		output[1] = 16 * hexDigits[2] + hexDigits[3];
+		break;
+
+	}
+}
+
+
+
+unsigned char uriGetOctetValue(const unsigned char * digits, int digitCount) {
+	switch (digitCount) {
+	case 1:
+		return digits[0];
+
+	case 2:
+		return 10 * digits[0] + digits[1];
+
+	case 3:
+	default:
+		return 100 * digits[0] + 10 * digits[1] + digits[2];
+
+	}
+}
diff -Nru /tmp/bxdedfLB6u/uriparser-0.6.0/lib/UriParseBase.h /tmp/fLjZ2dz9P3/uriparser-0.7.4/lib/UriParseBase.h
--- uriparser-0.6.0/lib/UriParseBase.h	2007-07-27 06:37:43.000000000 +0100
+++ uriparser-0.7.4/lib/UriParseBase.h	2008-12-20 18:52:47.000000000 +0000
@@ -1,55 +1,55 @@
-/*
- * uriparser - RFC 3986 URI parsing library
- *
- * Copyright (C) 2007, Weijia Song <songweijia@gmail.com>
- * Copyright (C) 2007, Sebastian Pipping <webmaster@hartwork.org>
- * All rights reserved.
- *
- * Redistribution  and use in source and binary forms, with or without
- * modification,  are permitted provided that the following conditions
- * are met:
- *
- *     * Redistributions   of  source  code  must  retain  the   above
- *       copyright  notice, this list of conditions and the  following
- *       disclaimer.
- *
- *     * Redistributions  in  binary  form must  reproduce  the  above
- *       copyright  notice, this list of conditions and the  following
- *       disclaimer   in  the  documentation  and/or  other  materials
- *       provided with the distribution.
- *
- *     * Neither  the name of the <ORGANIZATION> nor the names of  its
- *       contributors  may  be  used to endorse  or  promote  products
- *       derived  from  this software without specific  prior  written
- *       permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS  IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT  NOT
- * LIMITED  TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND  FITNESS
- * FOR  A  PARTICULAR  PURPOSE ARE DISCLAIMED. IN NO EVENT  SHALL  THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL,    SPECIAL,   EXEMPLARY,   OR   CONSEQUENTIAL   DAMAGES
- * (INCLUDING,  BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES;  LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT  LIABILITY,  OR  TORT (INCLUDING  NEGLIGENCE  OR  OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-#ifndef URI_PARSE_BASE_H
-#define URI_PARSE_BASE_H 1
-
-
-
-#include <uriparser/UriBase.h>
-
-
-
-void uriWriteQuadToDoubleByte(const unsigned char * hexDigits, int digitCount,
-		unsigned char * output);
-unsigned char uriGetOctetValue(const unsigned char * digits, int digitCount);
-
-
-
-#endif /* URI_PARSE_BASE_H */
+/*
+ * uriparser - RFC 3986 URI parsing library
+ *
+ * Copyright (C) 2007, Weijia Song <songweijia@gmail.com>
+ * Copyright (C) 2007, Sebastian Pipping <webmaster@hartwork.org>
+ * All rights reserved.
+ *
+ * Redistribution  and use in source and binary forms, with or without
+ * modification,  are permitted provided that the following conditions
+ * are met:
+ *
+ *     * Redistributions   of  source  code  must  retain  the   above
+ *       copyright  notice, this list of conditions and the  following
+ *       disclaimer.
+ *
+ *     * Redistributions  in  binary  form must  reproduce  the  above
+ *       copyright  notice, this list of conditions and the  following
+ *       disclaimer   in  the  documentation  and/or  other  materials
+ *       provided with the distribution.
+ *
+ *     * Neither  the name of the <ORGANIZATION> nor the names of  its
+ *       contributors  may  be  used to endorse  or  promote  products
+ *       derived  from  this software without specific  prior  written
+ *       permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS  IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT  NOT
+ * LIMITED  TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND  FITNESS
+ * FOR  A  PARTICULAR  PURPOSE ARE DISCLAIMED. IN NO EVENT  SHALL  THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL,    SPECIAL,   EXEMPLARY,   OR   CONSEQUENTIAL   DAMAGES
+ * (INCLUDING,  BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES;  LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT  LIABILITY,  OR  TORT (INCLUDING  NEGLIGENCE  OR  OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef URI_PARSE_BASE_H
+#define URI_PARSE_BASE_H 1
+
+
+
+#include <uriparser/UriBase.h>
+
+
+
+void uriWriteQuadToDoubleByte(const unsigned char * hexDigits, int digitCount,
+		unsigned char * output);
+unsigned char uriGetOctetValue(const unsigned char * digits, int digitCount);
+
+
+
+#endif /* URI_PARSE_BASE_H */
diff -Nru /tmp/bxdedfLB6u/uriparser-0.6.0/lib/UriParse.c /tmp/fLjZ2dz9P3/uriparser-0.7.4/lib/UriParse.c
--- uriparser-0.6.0/lib/UriParse.c	2007-09-12 18:53:22.000000000 +0100
+++ uriparser-0.7.4/lib/UriParse.c	2008-12-20 18:52:47.000000000 +0000
@@ -1,2191 +1,2205 @@
-/*
- * uriparser - RFC 3986 URI parsing library
- *
- * Copyright (C) 2007, Weijia Song <songweijia@gmail.com>
- * Copyright (C) 2007, Sebastian Pipping <webmaster@hartwork.org>
- * All rights reserved.
- *
- * Redistribution  and use in source and binary forms, with or without
- * modification,  are permitted provided that the following conditions
- * are met:
- *
- *     * Redistributions   of  source  code  must  retain  the   above
- *       copyright  notice, this list of conditions and the  following
- *       disclaimer.
- *
- *     * Redistributions  in  binary  form must  reproduce  the  above
- *       copyright  notice, this list of conditions and the  following
- *       disclaimer   in  the  documentation  and/or  other  materials
- *       provided with the distribution.
- *
- *     * Neither  the name of the <ORGANIZATION> nor the names of  its
- *       contributors  may  be  used to endorse  or  promote  products
- *       derived  from  this software without specific  prior  written
- *       permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS  IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT  NOT
- * LIMITED  TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND  FITNESS
- * FOR  A  PARTICULAR  PURPOSE ARE DISCLAIMED. IN NO EVENT  SHALL  THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL,    SPECIAL,   EXEMPLARY,   OR   CONSEQUENTIAL   DAMAGES
- * (INCLUDING,  BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES;  LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT  LIABILITY,  OR  TORT (INCLUDING  NEGLIGENCE  OR  OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-/**
- * @file UriParse.c
- * Holds the RFC 3986 %URI parsing implementation.
- * NOTE: This source file includes itself twice.
- */
-
-/* What encodings are enabled? */
-#include <uriparser/UriDefsConfig.h>
-#if (!defined(URI_PASS_ANSI) && !defined(URI_PASS_UNICODE))
-/* Include SELF twice */
-# define URI_PASS_ANSI 1
-# include "UriParse.c"
-# undef URI_PASS_ANSI
-# define URI_PASS_UNICODE 1
-# include "UriParse.c"
-# undef URI_PASS_UNICODE
-#else
-# ifdef URI_PASS_ANSI
-#  include <uriparser/UriDefsAnsi.h>
-# else
-#  include <uriparser/UriDefsUnicode.h>
-#  include <wchar.h>
-# endif
-
-
-
-#ifndef URI_DOXYGEN
-# include <uriparser/Uri.h>
-# include <uriparser/UriIp4.h>
-# include "UriCommon.h"
-# include "UriParseBase.h"
-#endif
-
-
-
-#define URI_SET_DIGIT \
-	     _UT('0'): \
-	case _UT('1'): \
-	case _UT('2'): \
-	case _UT('3'): \
-	case _UT('4'): \
-	case _UT('5'): \
-	case _UT('6'): \
-	case _UT('7'): \
-	case _UT('8'): \
-	case _UT('9')
-
-#define URI_SET_HEX_LETTER_UPPER \
-	     _UT('A'): \
-	case _UT('B'): \
-	case _UT('C'): \
-	case _UT('D'): \
-	case _UT('E'): \
-	case _UT('F')
-
-#define URI_SET_HEX_LETTER_LOWER \
-	     _UT('a'): \
-	case _UT('b'): \
-	case _UT('c'): \
-	case _UT('d'): \
-	case _UT('e'): \
-	case _UT('f')
-
-#define URI_SET_HEXDIG \
-	URI_SET_DIGIT: \
-	case URI_SET_HEX_LETTER_UPPER: \
-	case URI_SET_HEX_LETTER_LOWER
-
-#define URI_SET_ALPHA \
-	URI_SET_HEX_LETTER_UPPER: \
-	case URI_SET_HEX_LETTER_LOWER: \
-	case _UT('g'): \
-	case _UT('G'): \
-	case _UT('h'): \
-	case _UT('H'): \
-	case _UT('i'): \
-	case _UT('I'): \
-	case _UT('j'): \
-	case _UT('J'): \
-	case _UT('k'): \
-	case _UT('K'): \
-	case _UT('l'): \
-	case _UT('L'): \
-	case _UT('m'): \
-	case _UT('M'): \
-	case _UT('n'): \
-	case _UT('N'): \
-	case _UT('o'): \
-	case _UT('O'): \
-	case _UT('p'): \
-	case _UT('P'): \
-	case _UT('q'): \
-	case _UT('Q'): \
-	case _UT('r'): \
-	case _UT('R'): \
-	case _UT('s'): \
-	case _UT('S'): \
-	case _UT('t'): \
-	case _UT('T'): \
-	case _UT('u'): \
-	case _UT('U'): \
-	case _UT('v'): \
-	case _UT('V'): \
-	case _UT('w'): \
-	case _UT('W'): \
-	case _UT('x'): \
-	case _UT('X'): \
-	case _UT('y'): \
-	case _UT('Y'): \
-	case _UT('z'): \
-	case _UT('Z')
-
-
-
-static const URI_CHAR * URI_FUNC(ParseAuthority)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast);
-static const URI_CHAR * URI_FUNC(ParseAuthorityTwo)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast);
-static const URI_CHAR * URI_FUNC(ParseHexZero)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast);
-static const URI_CHAR * URI_FUNC(ParseHierPart)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast);
-static const URI_CHAR * URI_FUNC(ParseIpFutLoop)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast);
-static const URI_CHAR * URI_FUNC(ParseIpFutStopGo)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast);
-static const URI_CHAR * URI_FUNC(ParseIpLit2)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast);
-static const URI_CHAR * URI_FUNC(ParseIPv6address2)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast);
-static const URI_CHAR * URI_FUNC(ParseMustBeSegmentNzNc)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast);
-static const URI_CHAR * URI_FUNC(ParseOwnHost)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast);
-static const URI_CHAR * URI_FUNC(ParseOwnHost2)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast);
-static const URI_CHAR * URI_FUNC(ParseOwnHostUserInfo)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast);
-static const URI_CHAR * URI_FUNC(ParseOwnHostUserInfoNz)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast);
-static const URI_CHAR * URI_FUNC(ParseOwnPortUserInfo)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast);
-static const URI_CHAR * URI_FUNC(ParseOwnUserInfo)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast);
-static const URI_CHAR * URI_FUNC(ParsePartHelperTwo)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast);
-static const URI_CHAR * URI_FUNC(ParsePathAbsEmpty)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast);
-static const URI_CHAR * URI_FUNC(ParsePathAbsNoLeadSlash)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast);
-static const URI_CHAR * URI_FUNC(ParsePathRootless)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast);
-static const URI_CHAR * URI_FUNC(ParsePchar)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast);
-static const URI_CHAR * URI_FUNC(ParsePctEncoded)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast);
-static const URI_CHAR * URI_FUNC(ParsePctSubUnres)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast);
-static const URI_CHAR * URI_FUNC(ParsePort)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast);
-static const URI_CHAR * URI_FUNC(ParseQueryFrag)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast);
-static const URI_CHAR * URI_FUNC(ParseSegment)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast);
-static const URI_CHAR * URI_FUNC(ParseSegmentNz)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast);
-static const URI_CHAR * URI_FUNC(ParseSegmentNzNcOrScheme2)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast);
-static const URI_CHAR * URI_FUNC(ParseUriReference)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast);
-static const URI_CHAR * URI_FUNC(ParseUriTail)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast);
-static const URI_CHAR * URI_FUNC(ParseUriTailTwo)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast);
-static const URI_CHAR * URI_FUNC(ParseZeroMoreSlashSegs)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast);
-
-static UriBool URI_FUNC(OnExitOwnHost2)(URI_TYPE(ParserState) * state, const URI_CHAR * first);
-static UriBool URI_FUNC(OnExitOwnHostUserInfo)(URI_TYPE(ParserState) * state, const URI_CHAR * first);
-static UriBool URI_FUNC(OnExitOwnPortUserInfo)(URI_TYPE(ParserState) * state, const URI_CHAR * first);
-static UriBool URI_FUNC(OnExitSegmentNzNcOrScheme2)(URI_TYPE(ParserState) * state, const URI_CHAR * first);
-static void URI_FUNC(OnExitPartHelperTwo)(URI_TYPE(ParserState) * state);
-
-static void URI_FUNC(ResetParserState)(URI_TYPE(ParserState) * state);
-
-static UriBool URI_FUNC(PushPathSegment)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast);
-
-static void URI_FUNC(StopSyntax)(URI_TYPE(ParserState) * state, const URI_CHAR * errorPos);
-static void URI_FUNC(StopMalloc)(URI_TYPE(ParserState) * state);
-
-
-
-static URI_INLINE void URI_FUNC(StopSyntax)(URI_TYPE(ParserState) * state,
-		const URI_CHAR * errorPos) {
-	URI_FUNC(FreeUriMembers)(state->uri);
-	state->errorPos = errorPos;
-	state->errorCode = URI_ERROR_SYNTAX;
-}
-
-
-
-static URI_INLINE void URI_FUNC(StopMalloc)(URI_TYPE(ParserState) * state) {
-	URI_FUNC(FreeUriMembers)(state->uri);
-	state->errorPos = NULL;
-	state->errorCode = URI_ERROR_MALLOC;
-}
-
-
-
-/*
- * [authority]-><[>[ipLit2][authorityTwo]
- * [authority]->[ownHostUserInfoNz]
- * [authority]-><NULL>
- */
-static URI_INLINE const URI_CHAR * URI_FUNC(ParseAuthority)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast) {
-	if (first >= afterLast) {
-		/* "" regname host */
-		state->uri->hostText.first = URI_FUNC(SafeToPointTo);
-		state->uri->hostText.afterLast = URI_FUNC(SafeToPointTo);
-		return afterLast;
-	}
-
-	switch (*first) {
-	case _UT('['):
-		{
-			const URI_CHAR * const afterIpLit2
-					= URI_FUNC(ParseIpLit2)(state, first + 1, afterLast);
-			if (afterIpLit2 == NULL) {
-				return NULL;
-			}
-			state->uri->hostText.first = first + 1; /* HOST BEGIN */
-			return URI_FUNC(ParseAuthorityTwo)(state, afterIpLit2, afterLast);
-		}
-
-	case _UT('!'):
-	case _UT('$'):
-	case _UT('%'):
-	case _UT('&'):
-	case _UT('('):
-	case _UT(')'):
-	case _UT('-'):
-	case _UT('*'):
-	case _UT(','):
-	case _UT('.'):
-	case _UT(':'):
-	case _UT(';'):
-	case _UT('@'):
-	case _UT('\''):
-	case _UT('_'):
-	case _UT('~'):
-	case _UT('+'):
-	case _UT('='):
-	case URI_SET_DIGIT:
-	case URI_SET_ALPHA:
-		state->uri->userInfo.first = first; /* USERINFO BEGIN */
-		return URI_FUNC(ParseOwnHostUserInfoNz)(state, first, afterLast);
-
-	default:
-		/* "" regname host */
-		state->uri->hostText.first = URI_FUNC(SafeToPointTo);
-		state->uri->hostText.afterLast = URI_FUNC(SafeToPointTo);
-		return first;
-	}
-}
-
-
-
-/*
- * [authorityTwo]-><:>[port]
- * [authorityTwo]-><NULL>
- */
-static URI_INLINE const URI_CHAR * URI_FUNC(ParseAuthorityTwo)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast) {
-	if (first >= afterLast) {
-		return afterLast;
-	}
-
-	switch (*first) {
-	case _UT(':'):
-		{
-			const URI_CHAR * const afterPort = URI_FUNC(ParsePort)(state, first + 1, afterLast);
-			if (afterPort == NULL) {
-				return NULL;
-			}
-			state->uri->portText.first = first + 1; /* PORT BEGIN */
-			state->uri->portText.afterLast = afterPort; /* PORT END */
-			return afterPort;
-		}
-
-	default:
-		return first;
-	}
-}
-
-
-
-/*
- * [hexZero]->[HEXDIG][hexZero]
- * [hexZero]-><NULL>
- */
-static const URI_CHAR * URI_FUNC(ParseHexZero)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast) {
-	if (first >= afterLast) {
-		return afterLast;
-	}
-
-	switch (*first) {
-	case URI_SET_HEXDIG:
-		return URI_FUNC(ParseHexZero)(state, first + 1, afterLast);
-
-	default:
-		return first;
-	}
-}
-
-
-
-/*
- * [hierPart]->[pathRootless]
- * [hierPart]-></>[partHelperTwo]
- * [hierPart]-><NULL>
- */
-static URI_INLINE const URI_CHAR * URI_FUNC(ParseHierPart)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast) {
-	if (first >= afterLast) {
-		return afterLast;
-	}
-
-	switch (*first) {
-	case _UT('!'):
-	case _UT('$'):
-	case _UT('%'):
-	case _UT('&'):
-	case _UT('('):
-	case _UT(')'):
-	case _UT('-'):
-	case _UT('*'):
-	case _UT(','):
-	case _UT('.'):
-	case _UT(':'):
-	case _UT(';'):
-	case _UT('@'):
-	case _UT('\''):
-	case _UT('_'):
-	case _UT('~'):
-	case _UT('+'):
-	case _UT('='):
-	case URI_SET_DIGIT:
-	case URI_SET_ALPHA:
-		return URI_FUNC(ParsePathRootless)(state, first, afterLast);
-
-	case _UT('/'):
-		return URI_FUNC(ParsePartHelperTwo)(state, first + 1, afterLast);
-
-	default:
-		return first;
-	}
-}
-
-
-
-/*
- * [ipFutLoop]->[subDelims][ipFutStopGo]
- * [ipFutLoop]->[unreserved][ipFutStopGo]
- * [ipFutLoop]-><:>[ipFutStopGo]
- */
-static const URI_CHAR * URI_FUNC(ParseIpFutLoop)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast) {
-	if (first >= afterLast) {
-		URI_FUNC(StopSyntax)(state, first);
-		return NULL;
-	}
-
-	switch (*first) {
-	case _UT('!'):
-	case _UT('$'):
-	case _UT('&'):
-	case _UT('('):
-	case _UT(')'):
-	case _UT('-'):
-	case _UT('*'):
-	case _UT(','):
-	case _UT('.'):
-	case _UT(':'):
-	case _UT(';'):
-	case _UT('\''):
-	case _UT('_'):
-	case _UT('~'):
-	case _UT('+'):
-	case _UT('='):
-	case URI_SET_DIGIT:
-	case URI_SET_ALPHA:
-		return URI_FUNC(ParseIpFutStopGo)(state, first + 1, afterLast);
-
-	default:
-		URI_FUNC(StopSyntax)(state, first);
-		return NULL;
-	}
-}
-
-
-
-/*
- * [ipFutStopGo]->[ipFutLoop]
- * [ipFutStopGo]-><NULL>
- */
-static const URI_CHAR * URI_FUNC(ParseIpFutStopGo)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast) {
-	if (first >= afterLast) {
-		return afterLast;
-	}
-
-	switch (*first) {
-	case _UT('!'):
-	case _UT('$'):
-	case _UT('&'):
-	case _UT('('):
-	case _UT(')'):
-	case _UT('-'):
-	case _UT('*'):
-	case _UT(','):
-	case _UT('.'):
-	case _UT(':'):
-	case _UT(';'):
-	case _UT('\''):
-	case _UT('_'):
-	case _UT('~'):
-	case _UT('+'):
-	case _UT('='):
-	case URI_SET_DIGIT:
-	case URI_SET_ALPHA:
-		return URI_FUNC(ParseIpFutLoop)(state, first, afterLast);
-
-	default:
-		return first;
-	}
-}
-
-
-
-/*
- * [ipFuture]-><v>[HEXDIG][hexZero]<.>[ipFutLoop]
- */
-static const URI_CHAR * URI_FUNC(ParseIpFuture)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast) {
-	if (first >= afterLast) {
-		URI_FUNC(StopSyntax)(state, first);
-		return NULL;
-	}
-
-	/*
-	First character has already been
-	checked before entering this rule.
-
-	switch (*first) {
-	case _UT('v'):
-	*/
-		if (first + 1 >= afterLast) {
-			URI_FUNC(StopSyntax)(state, first + 1);
-			return NULL;
-		}
-
-		switch (first[1]) {
-		case URI_SET_HEXDIG:
-			{
-				const URI_CHAR * afterIpFutLoop;
-				const URI_CHAR * const afterHexZero
-						= URI_FUNC(ParseHexZero)(state, first + 2, afterLast);
-				if (afterHexZero == NULL) {
-					return NULL;
-				}
-				if ((afterHexZero >= afterLast)
-						|| (*afterHexZero != _UT('.'))) {
-					URI_FUNC(StopSyntax)(state, afterHexZero);
-					return NULL;
-				}
-				state->uri->hostText.first = first; /* HOST BEGIN */
-				state->uri->hostData.ipFuture.first = first; /* IPFUTURE BEGIN */
-				afterIpFutLoop = URI_FUNC(ParseIpFutLoop)(state, afterHexZero + 1, afterLast);
-				if (afterIpFutLoop == NULL) {
-					return NULL;
-				}
-				state->uri->hostText.afterLast = afterIpFutLoop; /* HOST END */
-				state->uri->hostData.ipFuture.afterLast = afterIpFutLoop; /* IPFUTURE END */
-				return afterIpFutLoop;
-			}
-
-		default:
-			URI_FUNC(StopSyntax)(state, first + 1);
-			return NULL;
-		}
-
-	/*
-	default:
-		URI_FUNC(StopSyntax)(state, first);
-		return NULL;
-	}
-	*/
-}
-
-
-
-/*
- * [ipLit2]->[ipFuture]<]>
- * [ipLit2]->[IPv6address2]
- */
-static URI_INLINE const URI_CHAR * URI_FUNC(ParseIpLit2)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast) {
-	if (first >= afterLast) {
-		URI_FUNC(StopSyntax)(state, first);
-		return NULL;
-	}
-
-	switch (*first) {
-	case _UT('v'):
-		{
-			const URI_CHAR * const afterIpFuture
-					= URI_FUNC(ParseIpFuture)(state, first, afterLast);
-			if (afterIpFuture == NULL) {
-				return NULL;
-			}
-			if ((afterIpFuture >= afterLast)
-					|| (*afterIpFuture != _UT(']'))) {
-				URI_FUNC(StopSyntax)(state, first);
-				return NULL;
-			}
-			return afterIpFuture + 1;
-		}
-
-	case _UT(':'):
-	case _UT(']'):
-	case URI_SET_HEXDIG:
-		state->uri->hostData.ip6 = malloc(1 * sizeof(UriIp6)); /* Freed when stopping on parse error */
-		if (state->uri->hostData.ip6 == NULL) {
-			URI_FUNC(StopMalloc)(state);
-			return NULL;
-		}
-		return URI_FUNC(ParseIPv6address2)(state, first, afterLast);
-
-	default:
-		URI_FUNC(StopSyntax)(state, first);
-		return NULL;
-	}
-}
-
-
-
-/*
- * [IPv6address2]->..<]>
- */
-static const URI_CHAR * URI_FUNC(ParseIPv6address2)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast) {
-	int zipperEver = 0;
-	int quadsDone = 0;
-	int digitCount = 0;
-	unsigned char digitHistory[4];
-	int ip4OctetsDone = 0;
-
-	unsigned char quadsAfterZipper[14];
-	int quadsAfterZipperCount = 0;
-
-
-	for (;;) {
-		if (first >= afterLast) {
-			URI_FUNC(StopSyntax)(state, first);
-			return NULL;
-		}
-
-		/* Inside IPv4 part? */
-		if (ip4OctetsDone > 0) {
-			/* Eat rest of IPv4 address */
-			for (;;) {
-				switch (*first) {
-				case URI_SET_DIGIT:
-					if (digitCount == 4) {
-						URI_FUNC(StopSyntax)(state, first);
-						return NULL;
-					}
-					digitHistory[digitCount++] = (unsigned char)(9 + *first - _UT('9'));
-					break;
-
-				case _UT('.'):
-					if ((ip4OctetsDone == 4) /* NOTE! */
-							|| (digitCount == 0)
-							|| (digitCount == 4)) {
-						/* Invalid digit or octet count */
-						URI_FUNC(StopSyntax)(state, first);
-						return NULL;
-					} else if ((digitCount > 1)
-							&& (digitHistory[0] == 0)) {
-						/* Leading zero */
-						URI_FUNC(StopSyntax)(state, first - digitCount);
-						return NULL;
-					} else if ((digitCount > 2)
-							&& (digitHistory[1] == 0)) {
-						/* Leading zero */
-						URI_FUNC(StopSyntax)(state, first - digitCount + 1);
-						return NULL;
-					} else if ((digitCount == 3)
-							&& (100 * digitHistory[0]
-								+ 10 * digitHistory[1]
-								+ digitHistory[2] > 255)) {
-						/* Octet value too large */
-						if (digitHistory[0] > 2) {
-							URI_FUNC(StopSyntax)(state, first - 3);
-						} else if (digitHistory[1] > 5) {
-							URI_FUNC(StopSyntax)(state, first - 2);
-						} else {
-							URI_FUNC(StopSyntax)(state, first - 1);
-						}
-						return NULL;
-					}
-
-					/* Copy IPv4 octet */
-					state->uri->hostData.ip6->data[16 - 4 + ip4OctetsDone] = uriGetOctetValue(digitHistory, digitCount);
-					digitCount = 0;
-					ip4OctetsDone++;
-					break;
-
-				case _UT(']'):
-					if ((ip4OctetsDone != 3) /* NOTE! */
-							|| (digitCount == 0)
-							|| (digitCount == 4)) {
-						/* Invalid digit or octet count */
-						URI_FUNC(StopSyntax)(state, first);
-						return NULL;
-					} else if ((digitCount > 1)
-							&& (digitHistory[0] == 0)) {
-						/* Leading zero */
-						URI_FUNC(StopSyntax)(state, first - digitCount);
-						return NULL;
-					} else if ((digitCount > 2)
-							&& (digitHistory[1] == 0)) {
-						/* Leading zero */
-						URI_FUNC(StopSyntax)(state, first - digitCount + 1);
-						return NULL;
-					} else if ((digitCount == 3)
-							&& (100 * digitHistory[0]
-								+ 10 * digitHistory[1]
-								+ digitHistory[2] > 255)) {
-						/* Octet value too large */
-						if (digitHistory[0] > 2) {
-							URI_FUNC(StopSyntax)(state, first - 3);
-						} else if (digitHistory[1] > 5) {
-							URI_FUNC(StopSyntax)(state, first - 2);
-						} else {
-							URI_FUNC(StopSyntax)(state, first - 1);
-						}
-						return NULL;
-					}
-
-					state->uri->hostText.afterLast = first; /* HOST END */
-
-					/* Copy missing quads right before IPv4 */
-					memcpy(state->uri->hostData.ip6->data + 16 - 4 - 2 * quadsAfterZipperCount,
-								quadsAfterZipper, 2 * quadsAfterZipperCount);
-
-					/* Copy last IPv4 octet */
-					state->uri->hostData.ip6->data[16 - 4 + 3] = uriGetOctetValue(digitHistory, digitCount);
-
-					return first + 1;
-
-				default:
-					URI_FUNC(StopSyntax)(state, first);
-					return NULL;
-				}
-				first++;
-			}
-		} else {
-			/* Eat while no dot in sight */
-			int letterAmong = 0;
-			int walking = 1;
-			do {
-				switch (*first) {
-				case URI_SET_HEX_LETTER_LOWER:
-					letterAmong = 1;
-					if (digitCount == 4) {
-						URI_FUNC(StopSyntax)(state, first);
-						return NULL;
-					}
-					digitHistory[digitCount] = (unsigned char)(15 + *first - _UT('f'));
-					digitCount++;
-					break;
-
-				case URI_SET_HEX_LETTER_UPPER:
-					letterAmong = 1;
-					if (digitCount == 4) {
-						URI_FUNC(StopSyntax)(state, first);
-						return NULL;
-					}
-					digitHistory[digitCount] = (unsigned char)(15 + *first - _UT('F'));
-					digitCount++;
-					break;
-
-				case URI_SET_DIGIT:
-					if (digitCount == 4) {
-						URI_FUNC(StopSyntax)(state, first);
-						return NULL;
-					}
-					digitHistory[digitCount] = (unsigned char)(9 + *first - _UT('9'));
-					digitCount++;
-					break;
-
-				case _UT(':'):
-					{
-						int setZipper = 0;
-
-						/* Too many quads? */
-						if (quadsDone > 8 - zipperEver) {
-							URI_FUNC(StopSyntax)(state, first);
-							return NULL;
-						}
-
-						/* "::"? */
-						if (first + 1 >= afterLast) {
-							URI_FUNC(StopSyntax)(state, first + 1);
-							return NULL;
-						}
-						if (first[1] == _UT(':')) {
-							const int resetOffset = 2 * (quadsDone + (digitCount > 0));
-
-							first++;
-							if (zipperEver) {
-								URI_FUNC(StopSyntax)(state, first);
-								return NULL; /* "::.+::" */
-							}
-
-							/* Zero everything after zipper */
-							memset(state->uri->hostData.ip6->data + resetOffset, 0, 16 - resetOffset);
-							setZipper = 1;
-
-							/* ":::+"? */
-							if (first + 1 >= afterLast) {
-								URI_FUNC(StopSyntax)(state, first + 1);
-								return NULL; /* No ']' yet */
-							}
-							if (first[1] == _UT(':')) {
-								URI_FUNC(StopSyntax)(state, first + 1);
-								return NULL; /* ":::+ "*/
-							}
-						}
-						if (digitCount > 0) {
-							if (zipperEver) {
-								uriWriteQuadToDoubleByte(digitHistory, digitCount, quadsAfterZipper + 2 * quadsAfterZipperCount);
-								quadsAfterZipperCount++;
-							} else {
-								uriWriteQuadToDoubleByte(digitHistory, digitCount, state->uri->hostData.ip6->data + 2 * quadsDone);
-							}
-							quadsDone++;
-							digitCount = 0;
-						}
-						letterAmong = 0;
-
-						if (setZipper) {
-							zipperEver = 1;
-						}
-					}
-					break;
-
-				case _UT('.'):
-					if ((quadsDone > 6) /* NOTE */
-							|| (!zipperEver && (quadsDone < 6))
-							|| letterAmong
-							|| (digitCount == 0)
-							|| (digitCount == 4)) {
-						/* Invalid octet before */
-						URI_FUNC(StopSyntax)(state, first);
-						return NULL;
-					} else if ((digitCount > 1)
-							&& (digitHistory[0] == 0)) {
-						/* Leading zero */
-						URI_FUNC(StopSyntax)(state, first - digitCount);
-						return NULL;
-					} else if ((digitCount > 2)
-							&& (digitHistory[1] == 0)) {
-						/* Leading zero */
-						URI_FUNC(StopSyntax)(state, first - digitCount + 1);
-						return NULL;
-					} else if ((digitCount == 3)
-							&& (100 * digitHistory[0]
-								+ 10 * digitHistory[1]
-								+ digitHistory[2] > 255)) {
-						/* Octet value too large */
-						if (digitHistory[0] > 2) {
-							URI_FUNC(StopSyntax)(state, first - 3);
-						} else if (digitHistory[1] > 5) {
-							URI_FUNC(StopSyntax)(state, first - 2);
-						} else {
-							URI_FUNC(StopSyntax)(state, first - 1);
-						}
-						return NULL;
-					}
-
-					/* Copy first IPv4 octet */
-					state->uri->hostData.ip6->data[16 - 4] = uriGetOctetValue(digitHistory, digitCount);
-					digitCount = 0;
-
-					/* Switch over to IPv4 loop */
-					ip4OctetsDone = 1;
-					walking = 0;
-					break;
-
-				case _UT(']'):
-					/* Too little quads? */
-					if (!zipperEver && !((quadsDone == 7) && (digitCount > 0))) {
-						URI_FUNC(StopSyntax)(state, first);
-						return NULL;
-					}
-
-					if (digitCount > 0) {
-						if (zipperEver) {
-							uriWriteQuadToDoubleByte(digitHistory, digitCount, quadsAfterZipper + 2 * quadsAfterZipperCount);
-							quadsAfterZipperCount++;
-						} else {
-							uriWriteQuadToDoubleByte(digitHistory, digitCount, state->uri->hostData.ip6->data + 2 * quadsDone);
-						}
-						/*
-						quadsDone++;
-						digitCount = 0;
-						*/
-					}
-
-					/* Copy missing quads to the end */
-					memcpy(state->uri->hostData.ip6->data + 16 - 2 * quadsAfterZipperCount,
-								quadsAfterZipper, 2 * quadsAfterZipperCount);
-
-					state->uri->hostText.afterLast = first; /* HOST END */
-					return first + 1; /* Fine */
-
-				default:
-					URI_FUNC(StopSyntax)(state, first);
-					return NULL;
-				}
-				first++;
-
-				if (first >= afterLast) {
-					URI_FUNC(StopSyntax)(state, first);
-					return NULL; /* No ']' yet */
-				}
-			} while (walking);
-		}
-	}
-}
-
-
-
-/*
- * [mustBeSegmentNzNc]->[pctEncoded][mustBeSegmentNzNc]
- * [mustBeSegmentNzNc]->[subDelims][mustBeSegmentNzNc]
- * [mustBeSegmentNzNc]->[unreserved][mustBeSegmentNzNc]
- * [mustBeSegmentNzNc]->[uriTail] // can take <NULL>
- * [mustBeSegmentNzNc]-></>[segment][zeroMoreSlashSegs][uriTail]
- * [mustBeSegmentNzNc]-><@>[mustBeSegmentNzNc]
- */
-static const URI_CHAR * URI_FUNC(ParseMustBeSegmentNzNc)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast) {
-	if (first >= afterLast) {
-		if (!URI_FUNC(PushPathSegment)(state, state->uri->scheme.first, first)) { /* SEGMENT BOTH */
-			URI_FUNC(StopMalloc)(state);
-			return NULL;
-		}
-		state->uri->scheme.first = NULL; /* Not a scheme, reset */
-		return afterLast;
-	}
-
-	switch (*first) {
-	case _UT('%'):
-		{
-			const URI_CHAR * const afterPctEncoded
-					= URI_FUNC(ParsePctEncoded)(state, first, afterLast);
-			if (afterPctEncoded == NULL) {
-				return NULL;
-			}
-			return URI_FUNC(ParseMustBeSegmentNzNc)(state, afterPctEncoded, afterLast);
-		}
-
-	case _UT('@'):
-	case _UT('!'):
-	case _UT('$'):
-	case _UT('&'):
-	case _UT('('):
-	case _UT(')'):
-	case _UT('*'):
-	case _UT(','):
-	case _UT(';'):
-	case _UT('\''):
-	case _UT('+'):
-	case _UT('='):
-	case _UT('-'):
-	case _UT('.'):
-	case _UT('_'):
-	case _UT('~'):
-	case URI_SET_DIGIT:
-	case URI_SET_ALPHA:
-		return URI_FUNC(ParseMustBeSegmentNzNc)(state, first + 1, afterLast);
-
-	case _UT('/'):
-		{
-			const URI_CHAR * afterZeroMoreSlashSegs;
-			const URI_CHAR * afterSegment;
-			if (!URI_FUNC(PushPathSegment)(state, state->uri->scheme.first, first)) { /* SEGMENT BOTH */
-				URI_FUNC(StopMalloc)(state);
-				return NULL;
-			}
-			state->uri->scheme.first = NULL; /* Not a scheme, reset */
-			afterSegment = URI_FUNC(ParseSegment)(state, first + 1, afterLast);
-			if (afterSegment == NULL) {
-				return NULL;
-			}
-			if (!URI_FUNC(PushPathSegment)(state, first + 1, afterSegment)) { /* SEGMENT BOTH */
-				URI_FUNC(StopMalloc)(state);
-				return NULL;
-			}
-			afterZeroMoreSlashSegs
-					= URI_FUNC(ParseZeroMoreSlashSegs)(state, afterSegment, afterLast);
-			if (afterZeroMoreSlashSegs == NULL) {
-				return NULL;
-			}
-			return URI_FUNC(ParseUriTail)(state, afterZeroMoreSlashSegs, afterLast);
-		}
-
-	default:
-		if (!URI_FUNC(PushPathSegment)(state, state->uri->scheme.first, first)) { /* SEGMENT BOTH */
-			URI_FUNC(StopMalloc)(state);
-			return NULL;
-		}
-		state->uri->scheme.first = NULL; /* Not a scheme, reset */
-		return URI_FUNC(ParseUriTail)(state, first, afterLast);
-	}
-}
-
-
-
-/*
- * [ownHost]-><[>[ipLit2][authorityTwo]
- * [ownHost]->[ownHost2] // can take <NULL>
- */
-static URI_INLINE const URI_CHAR * URI_FUNC(ParseOwnHost)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast) {
-	if (first >= afterLast) {
-		return afterLast;
-	}
-
-	switch (*first) {
-	case _UT('['):
-		{
-			const URI_CHAR * const afterIpLit2
-					= URI_FUNC(ParseIpLit2)(state, first + 1, afterLast);
-			if (afterIpLit2 == NULL) {
-				return NULL;
-			}
-			state->uri->hostText.first = first + 1; /* HOST BEGIN */
-			return URI_FUNC(ParseAuthorityTwo)(state, afterIpLit2, afterLast);
-		}
-
-	default:
-		return URI_FUNC(ParseOwnHost2)(state, first, afterLast);
-	}
-}
-
-
-
-static URI_INLINE UriBool URI_FUNC(OnExitOwnHost2)(URI_TYPE(ParserState) * state, const URI_CHAR * first) {
-	state->uri->hostText.afterLast = first; /* HOST END */
-
-	/* Valid IPv4 or just a regname? */
-	state->uri->hostData.ip4 = malloc(1 * sizeof(UriIp4)); /* Freed when stopping on parse error */
-	if (state->uri->hostData.ip4 == NULL) {
-		return URI_FALSE; /* Raises malloc error */
-	}
-	if (URI_FUNC(ParseIpFourAddress)(state->uri->hostData.ip4->data,
-			state->uri->hostText.first, state->uri->hostText.afterLast)) {
-		/* Not IPv4 */
-		free(state->uri->hostData.ip4);
-		state->uri->hostData.ip4 = NULL;
-	}
-	return URI_TRUE; /* Success */
-}
-
-
-
-/*
- * [ownHost2]->[authorityTwo] // can take <NULL>
- * [ownHost2]->[pctSubUnres][ownHost2]
- */
-static const URI_CHAR * URI_FUNC(ParseOwnHost2)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast) {
-	if (first >= afterLast) {
-		if (!URI_FUNC(OnExitOwnHost2)(state, first)) {
-			URI_FUNC(StopMalloc)(state);
-			return NULL;
-		}
-		return afterLast;
-	}
-
-	switch (*first) {
-	case _UT('!'):
-	case _UT('$'):
-	case _UT('%'):
-	case _UT('&'):
-	case _UT('('):
-	case _UT(')'):
-	case _UT('-'):
-	case _UT('*'):
-	case _UT(','):
-	case _UT('.'):
-	case _UT(';'):
-	case _UT('\''):
-	case _UT('_'):
-	case _UT('~'):
-	case _UT('+'):
-	case _UT('='):
-	case URI_SET_DIGIT:
-	case URI_SET_ALPHA:
-		{
-			const URI_CHAR * const afterPctSubUnres
-					= URI_FUNC(ParsePctSubUnres)(state, first, afterLast);
-			if (afterPctSubUnres == NULL) {
-				return NULL;
-			}
-			return URI_FUNC(ParseOwnHost2)(state, afterPctSubUnres, afterLast);
-		}
-
-	default:
-		if (!URI_FUNC(OnExitOwnHost2)(state, first)) {
-			URI_FUNC(StopMalloc)(state);
-			return NULL;
-		}
-		return URI_FUNC(ParseAuthorityTwo)(state, first, afterLast);
-	}
-}
-
-
-
-static URI_INLINE UriBool URI_FUNC(OnExitOwnHostUserInfo)(URI_TYPE(ParserState) * state, const URI_CHAR * first) {
-	state->uri->hostText.first = state->uri->userInfo.first; /* Host instead of userInfo, update */
-	state->uri->userInfo.first = NULL; /* Not a userInfo, reset */
-	state->uri->hostText.afterLast = first; /* HOST END */
-
-	/* Valid IPv4 or just a regname? */
-	state->uri->hostData.ip4 = malloc(1 * sizeof(UriIp4)); /* Freed when stopping on parse error */
-	if (state->uri->hostData.ip4 == NULL) {
-		return URI_FALSE; /* Raises malloc error */
-	}
-	if (URI_FUNC(ParseIpFourAddress)(state->uri->hostData.ip4->data,
-			state->uri->hostText.first, state->uri->hostText.afterLast)) {
-		/* Not IPv4 */
-		free(state->uri->hostData.ip4);
-		state->uri->hostData.ip4 = NULL;
-	}
-	return URI_TRUE; /* Success */
-}
-
-
-
-/*
- * [ownHostUserInfo]->[ownHostUserInfoNz]
- * [ownHostUserInfo]-><NULL>
- */
-static URI_INLINE const URI_CHAR * URI_FUNC(ParseOwnHostUserInfo)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast) {
-	if (first >= afterLast) {
-		if (!URI_FUNC(OnExitOwnHostUserInfo)(state, first)) {
-			URI_FUNC(StopMalloc)(state);
-			return NULL;
-		}
-		return afterLast;
-	}
-
-	switch (*first) {
-	case _UT('!'):
-	case _UT('$'):
-	case _UT('%'):
-	case _UT('&'):
-	case _UT('('):
-	case _UT(')'):
-	case _UT('-'):
-	case _UT('*'):
-	case _UT(','):
-	case _UT('.'):
-	case _UT(':'):
-	case _UT(';'):
-	case _UT('@'):
-	case _UT('\''):
-	case _UT('_'):
-	case _UT('~'):
-	case _UT('+'):
-	case _UT('='):
-	case URI_SET_DIGIT:
-	case URI_SET_ALPHA:
-		return URI_FUNC(ParseOwnHostUserInfoNz)(state, first, afterLast);
-
-	default:
-		if (!URI_FUNC(OnExitOwnHostUserInfo)(state, first)) {
-			URI_FUNC(StopMalloc)(state);
-			return NULL;
-		}
-		return first;
-	}
-}
-
-
-
-/*
- * [ownHostUserInfoNz]->[pctSubUnres][ownHostUserInfo]
- * [ownHostUserInfoNz]-><:>[ownPortUserInfo]
- * [ownHostUserInfoNz]-><@>[ownHost]
- */
-static const URI_CHAR * URI_FUNC(ParseOwnHostUserInfoNz)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast) {
-	if (first >= afterLast) {
-		URI_FUNC(StopSyntax)(state, first);
-		return NULL;
-	}
-
-	switch (*first) {
-	case _UT('!'):
-	case _UT('$'):
-	case _UT('%'):
-	case _UT('&'):
-	case _UT('('):
-	case _UT(')'):
-	case _UT('-'):
-	case _UT('*'):
-	case _UT(','):
-	case _UT('.'):
-	case _UT(';'):
-	case _UT('\''):
-	case _UT('_'):
-	case _UT('~'):
-	case _UT('+'):
-	case _UT('='):
-	case URI_SET_DIGIT:
-	case URI_SET_ALPHA:
-		{
-			const URI_CHAR * const afterPctSubUnres
-					= URI_FUNC(ParsePctSubUnres)(state, first, afterLast);
-			if (afterPctSubUnres == NULL) {
-				return NULL;
-			}
-			return URI_FUNC(ParseOwnHostUserInfo)(state, afterPctSubUnres, afterLast);
-		}
-
-	case _UT(':'):
-		state->uri->hostText.afterLast = first; /* HOST END */
-		state->uri->portText.first = first + 1; /* PORT BEGIN */
-		return URI_FUNC(ParseOwnPortUserInfo)(state, first + 1, afterLast);
-
-	case _UT('@'):
-		state->uri->userInfo.afterLast = first; /* USERINFO END */
-		state->uri->hostText.first = first + 1; /* HOST BEGIN */
-		return URI_FUNC(ParseOwnHost)(state, first + 1, afterLast);
-
-	default:
-		URI_FUNC(StopSyntax)(state, first);
-		return NULL;
-	}
-}
-
-
-
-static URI_INLINE UriBool URI_FUNC(OnExitOwnPortUserInfo)(URI_TYPE(ParserState) * state, const URI_CHAR * first) {
-	state->uri->hostText.first = state->uri->userInfo.first; /* Host instead of userInfo, update */
-	state->uri->userInfo.first = NULL; /* Not a userInfo, reset */
-	state->uri->portText.afterLast = first; /* PORT END */
-
-	/* Valid IPv4 or just a regname? */
-	state->uri->hostData.ip4 = malloc(1 * sizeof(UriIp4)); /* Freed when stopping on parse error */
-	if (state->uri->hostData.ip4 == NULL) {
-		return URI_FALSE; /* Raises malloc error */
-	}
-	if (URI_FUNC(ParseIpFourAddress)(state->uri->hostData.ip4->data,
-			state->uri->hostText.first, state->uri->hostText.afterLast)) {
-		/* Not IPv4 */
-		free(state->uri->hostData.ip4);
-		state->uri->hostData.ip4 = NULL;
-	}
-	return URI_TRUE; /* Success */
-}
-
-
-
-/*
- * [ownPortUserInfo]->[ALPHA][ownUserInfo]
- * [ownPortUserInfo]->[DIGIT][ownPortUserInfo]
- * [ownPortUserInfo]-><.>[ownUserInfo]
- * [ownPortUserInfo]-><_>[ownUserInfo]
- * [ownPortUserInfo]-><~>[ownUserInfo]
- * [ownPortUserInfo]-><->[ownUserInfo]
- * [ownPortUserInfo]-><NULL>
- */
-static const URI_CHAR * URI_FUNC(ParseOwnPortUserInfo)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast) {
-	if (first >= afterLast) {
-		if (!URI_FUNC(OnExitOwnPortUserInfo)(state, first)) {
-			URI_FUNC(StopMalloc)(state);
-			return NULL;
-		}
-		return afterLast;
-	}
-
-	switch (*first) {
-	case _UT('.'):
-	case _UT('_'):
-	case _UT('~'):
-	case _UT('-'):
-	case URI_SET_ALPHA:
-		state->uri->hostText.afterLast = NULL; /* Not a host, reset */
-		state->uri->portText.first = NULL; /* Not a port, reset */
-		return URI_FUNC(ParseOwnUserInfo)(state, first + 1, afterLast);
-
-	case URI_SET_DIGIT:
-		return URI_FUNC(ParseOwnPortUserInfo)(state, first + 1, afterLast);
-
-	default:
-		if (!URI_FUNC(OnExitOwnPortUserInfo)(state, first)) {
-			URI_FUNC(StopMalloc)(state);
-			return NULL;
-		}
-		return first;
-	}
-}
-
-
-
-/*
- * [ownUserInfo]->[pctSubUnres][ownUserInfo]
- * [ownUserInfo]-><:>[ownUserInfo]
- * [ownUserInfo]-><@>[ownHost]
- */
-static const URI_CHAR * URI_FUNC(ParseOwnUserInfo)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast) {
-	if (first >= afterLast) {
-		URI_FUNC(StopSyntax)(state, first);
-		return NULL;
-	}
-
-	switch (*first) {
-	case _UT('!'):
-	case _UT('$'):
-	case _UT('%'):
-	case _UT('&'):
-	case _UT('('):
-	case _UT(')'):
-	case _UT('-'):
-	case _UT('*'):
-	case _UT(','):
-	case _UT('.'):
-	case _UT(';'):
-	case _UT('\''):
-	case _UT('_'):
-	case _UT('~'):
-	case _UT('+'):
-	case _UT('='):
-	case URI_SET_DIGIT:
-	case URI_SET_ALPHA:
-		{
-			const URI_CHAR * const afterPctSubUnres
-					= URI_FUNC(ParsePctSubUnres)(state, first, afterLast);
-			if (afterPctSubUnres == NULL) {
-				return NULL;
-			}
-			return URI_FUNC(ParseOwnUserInfo)(state, afterPctSubUnres, afterLast);
-		}
-
-	case _UT(':'):
-		return URI_FUNC(ParseOwnUserInfo)(state, first + 1, afterLast);
-
-	case _UT('@'):
-		/* SURE */
-		state->uri->userInfo.afterLast = first; /* USERINFO END */
-		state->uri->hostText.first = first + 1; /* HOST BEGIN */
-		return URI_FUNC(ParseOwnHost)(state, first + 1, afterLast);
-
-	default:
-		URI_FUNC(StopSyntax)(state, first);
-		return NULL;
-	}
-}
-
-
-
-static URI_INLINE void URI_FUNC(OnExitPartHelperTwo)(URI_TYPE(ParserState) * state) {
-	state->uri->absolutePath = URI_TRUE;
-}
-
-
-
-/*
- * [partHelperTwo]->[pathAbsNoLeadSlash] // can take <NULL>
- * [partHelperTwo]-></>[authority][pathAbsEmpty]
- */
-static URI_INLINE const URI_CHAR * URI_FUNC(ParsePartHelperTwo)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast) {
-	if (first >= afterLast) {
-		URI_FUNC(OnExitPartHelperTwo)(state);
-		return afterLast;
-	}
-
-	switch (*first) {
-	case _UT('/'):
-		{
-			const URI_CHAR * const afterAuthority
-					= URI_FUNC(ParseAuthority)(state, first + 1, afterLast);
-			const URI_CHAR * afterPathAbsEmpty;
-			if (afterAuthority == NULL) {
-				return NULL;
-			}
-			afterPathAbsEmpty = URI_FUNC(ParsePathAbsEmpty)(state, afterAuthority, afterLast);
-
-			/* Fix path if only one empty segment */
-			if ((state->uri->pathHead != NULL)
-					&& (state->uri->pathHead->next == NULL)
-					&& (state->uri->pathHead->text.first == state->uri->pathHead->text.afterLast)) {
-				free(state->uri->pathHead);
-				state->uri->pathHead = NULL;
-				state->uri->pathTail = NULL;
-			}
-
-			return afterPathAbsEmpty;
-		}
-
-	default:
-		URI_FUNC(OnExitPartHelperTwo)(state);
-		return URI_FUNC(ParsePathAbsNoLeadSlash)(state, first, afterLast);
-	}
-}
-
-
-
-/*
- * [pathAbsEmpty]-></>[segment][pathAbsEmpty]
- * [pathAbsEmpty]-><NULL>
- */
-static const URI_CHAR * URI_FUNC(ParsePathAbsEmpty)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast) {
-	if (first >= afterLast) {
-		return afterLast;
-	}
-
-	switch (*first) {
-	case _UT('/'):
-		{
-			const URI_CHAR * const afterSegment
-					= URI_FUNC(ParseSegment)(state, first + 1, afterLast);
-			if (afterSegment == NULL) {
-				return NULL;
-			}
-			if (!URI_FUNC(PushPathSegment)(state, first + 1, afterSegment)) { /* SEGMENT BOTH */
-				URI_FUNC(StopMalloc)(state);
-				return NULL;
-			}
-			return URI_FUNC(ParsePathAbsEmpty)(state, afterSegment, afterLast);
-		}
-
-	default:
-		return first;
-	}
-}
-
-
-
-/*
- * [pathAbsNoLeadSlash]->[segmentNz][zeroMoreSlashSegs]
- * [pathAbsNoLeadSlash]-><NULL>
- */
-static URI_INLINE const URI_CHAR * URI_FUNC(ParsePathAbsNoLeadSlash)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast) {
-	if (first >= afterLast) {
-		return afterLast;
-	}
-
-	switch (*first) {
-	case _UT('!'):
-	case _UT('$'):
-	case _UT('%'):
-	case _UT('&'):
-	case _UT('('):
-	case _UT(')'):
-	case _UT('-'):
-	case _UT('*'):
-	case _UT(','):
-	case _UT('.'):
-	case _UT(':'):
-	case _UT(';'):
-	case _UT('@'):
-	case _UT('\''):
-	case _UT('_'):
-	case _UT('~'):
-	case _UT('+'):
-	case _UT('='):
-	case URI_SET_DIGIT:
-	case URI_SET_ALPHA:
-		{
-			const URI_CHAR * const afterSegmentNz
-					= URI_FUNC(ParseSegmentNz)(state, first, afterLast);
-			if (afterSegmentNz == NULL) {
-				return NULL;
-			}
-			if (!URI_FUNC(PushPathSegment)(state, first, afterSegmentNz)) { /* SEGMENT BOTH */
-				URI_FUNC(StopMalloc)(state);
-				return NULL;
-			}
-			return URI_FUNC(ParseZeroMoreSlashSegs)(state, afterSegmentNz, afterLast);
-		}
-
-	default:
-		return first;
-	}
-}
-
-
-
-/*
- * [pathRootless]->[segmentNz][zeroMoreSlashSegs]
- */
-static URI_INLINE const URI_CHAR * URI_FUNC(ParsePathRootless)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast) {
-	const URI_CHAR * const afterSegmentNz
-			= URI_FUNC(ParseSegmentNz)(state, first, afterLast);
-	if (afterSegmentNz == NULL) {
-		return NULL;
-	} else {
-		if (!URI_FUNC(PushPathSegment)(state, first, afterSegmentNz)) { /* SEGMENT BOTH */
-			URI_FUNC(StopMalloc)(state);
-			return NULL;
-		}
-	}
-	return URI_FUNC(ParseZeroMoreSlashSegs)(state, afterSegmentNz, afterLast);
-}
-
-
-
-/*
- * [pchar]->[pctEncoded]
- * [pchar]->[subDelims]
- * [pchar]->[unreserved]
- * [pchar]-><:>
- * [pchar]-><@>
- */
-static const URI_CHAR * URI_FUNC(ParsePchar)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast) {
-	if (first >= afterLast) {
-		URI_FUNC(StopSyntax)(state, first);
-		return NULL;
-	}
-
-	switch (*first) {
-	case _UT('%'):
-		return URI_FUNC(ParsePctEncoded)(state, first, afterLast);
-
-	case _UT(':'):
-	case _UT('@'):
-	case _UT('!'):
-	case _UT('$'):
-	case _UT('&'):
-	case _UT('('):
-	case _UT(')'):
-	case _UT('*'):
-	case _UT(','):
-	case _UT(';'):
-	case _UT('\''):
-	case _UT('+'):
-	case _UT('='):
-	case _UT('-'):
-	case _UT('.'):
-	case _UT('_'):
-	case _UT('~'):
-	case URI_SET_DIGIT:
-	case URI_SET_ALPHA:
-		return first + 1;
-
-	default:
-		URI_FUNC(StopSyntax)(state, first);
-		return NULL;
-	}
-}
-
-
-
-/*
- * [pctEncoded]-><%>[HEXDIG][HEXDIG]
- */
-static const URI_CHAR * URI_FUNC(ParsePctEncoded)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast) {
-	if (first >= afterLast) {
-		URI_FUNC(StopSyntax)(state, first);
-		return NULL;
-	}
-
-	/*
-	First character has already been
-	checked before entering this rule.
-
-	switch (*first) {
-	case _UT('%'):
-	*/
-		if (first + 1 >= afterLast) {
-			URI_FUNC(StopSyntax)(state, first + 1);
-			return NULL;
-		}
-
-		switch (first[1]) {
-		case URI_SET_HEXDIG:
-			if (first + 2 >= afterLast) {
-				URI_FUNC(StopSyntax)(state, first + 2);
-				return NULL;
-			}
-
-			switch (first[2]) {
-			case URI_SET_HEXDIG:
-				return first + 3;
-
-			default:
-				URI_FUNC(StopSyntax)(state, first + 2);
-				return NULL;
-			}
-
-		default:
-			URI_FUNC(StopSyntax)(state, first + 1);
-			return NULL;
-		}
-
-	/*
-	default:
-		URI_FUNC(StopSyntax)(state, first);
-		return NULL;
-	}
-	*/
-}
-
-
-
-/*
- * [pctSubUnres]->[pctEncoded]
- * [pctSubUnres]->[subDelims]
- * [pctSubUnres]->[unreserved]
- */
-static const URI_CHAR * URI_FUNC(ParsePctSubUnres)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast) {
-	if (first >= afterLast) {
-		URI_FUNC(StopSyntax)(state, first);
-		return NULL;
-	}
-
-	switch (*first) {
-	case _UT('%'):
-		return URI_FUNC(ParsePctEncoded)(state, first, afterLast);
-
-	case _UT('!'):
-	case _UT('$'):
-	case _UT('&'):
-	case _UT('('):
-	case _UT(')'):
-	case _UT('*'):
-	case _UT(','):
-	case _UT(';'):
-	case _UT('\''):
-	case _UT('+'):
-	case _UT('='):
-	case _UT('-'):
-	case _UT('.'):
-	case _UT('_'):
-	case _UT('~'):
-	case URI_SET_DIGIT:
-	case URI_SET_ALPHA:
-		return first + 1;
-
-	default:
-		URI_FUNC(StopSyntax)(state, first);
-		return NULL;
-	}
-}
-
-
-
-/*
- * [port]->[DIGIT][port]
- * [port]-><NULL>
- */
-static const URI_CHAR * URI_FUNC(ParsePort)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast) {
-	if (first >= afterLast) {
-		return afterLast;
-	}
-
-	switch (*first) {
-	case URI_SET_DIGIT:
-		return URI_FUNC(ParsePort)(state, first + 1, afterLast);
-
-	default:
-		return first;
-	}
-}
-
-
-
-/*
- * [queryFrag]->[pchar][queryFrag]
- * [queryFrag]-></>[queryFrag]
- * [queryFrag]-><?>[queryFrag]
- * [queryFrag]-><NULL>
- */
-static const URI_CHAR * URI_FUNC(ParseQueryFrag)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast) {
-	if (first >= afterLast) {
-		return afterLast;
-	}
-
-	switch (*first) {
-	case _UT('!'):
-	case _UT('$'):
-	case _UT('%'):
-	case _UT('&'):
-	case _UT('('):
-	case _UT(')'):
-	case _UT('-'):
-	case _UT('*'):
-	case _UT(','):
-	case _UT('.'):
-	case _UT(':'):
-	case _UT(';'):
-	case _UT('@'):
-	case _UT('\''):
-	case _UT('_'):
-	case _UT('~'):
-	case _UT('+'):
-	case _UT('='):
-	case URI_SET_DIGIT:
-	case URI_SET_ALPHA:
-		{
-			const URI_CHAR * const afterPchar
-					= URI_FUNC(ParsePchar)(state, first, afterLast);
-			if (afterPchar == NULL) {
-				return NULL;
-			}
-			return URI_FUNC(ParseQueryFrag)(state, afterPchar, afterLast);
-		}
-
-	case _UT('/'):
-	case _UT('?'):
-		return URI_FUNC(ParseQueryFrag)(state, first + 1, afterLast);
-
-	default:
-		return first;
-	}
-}
-
-
-
-/*
- * [segment]->[pchar][segment]
- * [segment]-><NULL>
- */
-static const URI_CHAR * URI_FUNC(ParseSegment)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast) {
-	if (first >= afterLast) {
-		return afterLast;
-	}
-
-	switch (*first) {
-	case _UT('!'):
-	case _UT('$'):
-	case _UT('%'):
-	case _UT('&'):
-	case _UT('('):
-	case _UT(')'):
-	case _UT('-'):
-	case _UT('*'):
-	case _UT(','):
-	case _UT('.'):
-	case _UT(':'):
-	case _UT(';'):
-	case _UT('@'):
-	case _UT('\''):
-	case _UT('_'):
-	case _UT('~'):
-	case _UT('+'):
-	case _UT('='):
-	case URI_SET_DIGIT:
-	case URI_SET_ALPHA:
-		{
-			const URI_CHAR * const afterPchar
-					= URI_FUNC(ParsePchar)(state, first, afterLast);
-			if (afterPchar == NULL) {
-				return NULL;
-			}
-			return URI_FUNC(ParseSegment)(state, afterPchar, afterLast);
-		}
-
-	default:
-		return first;
-	}
-}
-
-
-
-/*
- * [segmentNz]->[pchar][segment]
- */
-static URI_INLINE const URI_CHAR * URI_FUNC(ParseSegmentNz)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast) {
-	const URI_CHAR * const afterPchar
-			= URI_FUNC(ParsePchar)(state, first, afterLast);
-	if (afterPchar == NULL) {
-		return NULL;
-	}
-	return URI_FUNC(ParseSegment)(state, afterPchar, afterLast);
-}
-
-
-
-static URI_INLINE UriBool URI_FUNC(OnExitSegmentNzNcOrScheme2)(URI_TYPE(ParserState) * state, const URI_CHAR * first) {
-	if (!URI_FUNC(PushPathSegment)(state, state->uri->scheme.first, first)) { /* SEGMENT BOTH */
-		return URI_FALSE; /* Raises malloc error*/
-	}
-	state->uri->scheme.first = NULL; /* Not a scheme, reset */
-	return URI_TRUE; /* Success */
-}
-
-
-
-/*
- * [segmentNzNcOrScheme2]->[ALPHA][segmentNzNcOrScheme2]
- * [segmentNzNcOrScheme2]->[DIGIT][segmentNzNcOrScheme2]
- * [segmentNzNcOrScheme2]->[pctEncoded][mustBeSegmentNzNc]
- * [segmentNzNcOrScheme2]->[uriTail] // can take <NULL>
- * [segmentNzNcOrScheme2]-><!>[mustBeSegmentNzNc]
- * [segmentNzNcOrScheme2]-><$>[mustBeSegmentNzNc]
- * [segmentNzNcOrScheme2]-><&>[mustBeSegmentNzNc]
- * [segmentNzNcOrScheme2]-><(>[mustBeSegmentNzNc]
- * [segmentNzNcOrScheme2]-><)>[mustBeSegmentNzNc]
- * [segmentNzNcOrScheme2]-><*>[mustBeSegmentNzNc]
- * [segmentNzNcOrScheme2]-><,>[mustBeSegmentNzNc]
- * [segmentNzNcOrScheme2]-><.>[segmentNzNcOrScheme2]
- * [segmentNzNcOrScheme2]-></>[segment][zeroMoreSlashSegs][uriTail]
- * [segmentNzNcOrScheme2]-><:>[hierPart][uriTail]
- * [segmentNzNcOrScheme2]-><;>[mustBeSegmentNzNc]
- * [segmentNzNcOrScheme2]-><@>[mustBeSegmentNzNc]
- * [segmentNzNcOrScheme2]-><_>[mustBeSegmentNzNc]
- * [segmentNzNcOrScheme2]-><~>[mustBeSegmentNzNc]
- * [segmentNzNcOrScheme2]-><+>[segmentNzNcOrScheme2]
- * [segmentNzNcOrScheme2]-><=>[mustBeSegmentNzNc]
- * [segmentNzNcOrScheme2]-><'>[mustBeSegmentNzNc]
- * [segmentNzNcOrScheme2]-><->[segmentNzNcOrScheme2]
- */
-static const URI_CHAR * URI_FUNC(ParseSegmentNzNcOrScheme2)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast) {
-	if (first >= afterLast) {
-		if (!URI_FUNC(OnExitSegmentNzNcOrScheme2)(state, first)) {
-			URI_FUNC(StopMalloc)(state);
-			return NULL;
-		}
-		return afterLast;
-	}
-
-	switch (*first) {
-	case _UT('.'):
-	case _UT('+'):
-	case _UT('-'):
-	case URI_SET_ALPHA:
-	case URI_SET_DIGIT:
-		return URI_FUNC(ParseSegmentNzNcOrScheme2)(state, first + 1, afterLast);
-
-	case _UT('%'):
-		{
-			const URI_CHAR * const afterPctEncoded
-					= URI_FUNC(ParsePctEncoded)(state, first, afterLast);
-			if (afterPctEncoded == NULL) {
-				return NULL;
-			}
-			return URI_FUNC(ParseMustBeSegmentNzNc)(state, afterPctEncoded, afterLast);
-		}
-
-	case _UT('!'):
-	case _UT('$'):
-	case _UT('&'):
-	case _UT('('):
-	case _UT(')'):
-	case _UT('*'):
-	case _UT(','):
-	case _UT(';'):
-	case _UT('@'):
-	case _UT('_'):
-	case _UT('~'):
-	case _UT('='):
-	case _UT('\''):
-		return URI_FUNC(ParseMustBeSegmentNzNc)(state, first + 1, afterLast);
-
-	case _UT('/'):
-		{
-			const URI_CHAR * afterZeroMoreSlashSegs;
-			const URI_CHAR * const afterSegment
-					= URI_FUNC(ParseSegment)(state, first + 1, afterLast);
-			if (afterSegment == NULL) {
-				return NULL;
-			}
-			if (!URI_FUNC(PushPathSegment)(state, state->uri->scheme.first, first)) { /* SEGMENT BOTH */
-				URI_FUNC(StopMalloc)(state);
-				return NULL;
-			}
-			state->uri->scheme.first = NULL; /* Not a scheme, reset */
-			if (!URI_FUNC(PushPathSegment)(state, first + 1, afterSegment)) { /* SEGMENT BOTH */
-				URI_FUNC(StopMalloc)(state);
-				return NULL;
-			}
-			afterZeroMoreSlashSegs
-					= URI_FUNC(ParseZeroMoreSlashSegs)(state, afterSegment, afterLast);
-			if (afterZeroMoreSlashSegs == NULL) {
-				return NULL;
-			}
-			return URI_FUNC(ParseUriTail)(state, afterZeroMoreSlashSegs, afterLast);
-		}
-
-	case _UT(':'):
-		{
-			const URI_CHAR * const afterHierPart
-					= URI_FUNC(ParseHierPart)(state, first + 1, afterLast);
-			state->uri->scheme.afterLast = first; /* SCHEME END */
-			if (afterHierPart == NULL) {
-				return NULL;
-			}
-			return URI_FUNC(ParseUriTail)(state, afterHierPart, afterLast);
-		}
-
-	default:
-		if (!URI_FUNC(OnExitSegmentNzNcOrScheme2)(state, first)) {
-			URI_FUNC(StopMalloc)(state);
-			return NULL;
-		}
-		return URI_FUNC(ParseUriTail)(state, first, afterLast);
-	}
-}
-
-
-
-/*
- * [uriReference]->[ALPHA][segmentNzNcOrScheme2]
- * [uriReference]->[DIGIT][mustBeSegmentNzNc]
- * [uriReference]->[pctEncoded][mustBeSegmentNzNc]
- * [uriReference]->[subDelims][mustBeSegmentNzNc]
- * [uriReference]->[uriTail] // can take <NULL>
- * [uriReference]-><.>[mustBeSegmentNzNc]
- * [uriReference]-></>[partHelperTwo][uriTail]
- * [uriReference]-><@>[mustBeSegmentNzNc]
- * [uriReference]-><_>[mustBeSegmentNzNc]
- * [uriReference]-><~>[mustBeSegmentNzNc]
- * [uriReference]-><->[mustBeSegmentNzNc]
- */
-static const URI_CHAR * URI_FUNC(ParseUriReference)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast) {
-	if (first >= afterLast) {
-		return afterLast;
-	}
-
-	switch (*first) {
-	case URI_SET_ALPHA:
-		state->uri->scheme.first = first; /* SCHEME BEGIN */
-		return URI_FUNC(ParseSegmentNzNcOrScheme2)(state, first + 1, afterLast);
-
-	case URI_SET_DIGIT:
-	case _UT('!'):
-	case _UT('$'):
-	case _UT('&'):
-	case _UT('('):
-	case _UT(')'):
-	case _UT('*'):
-	case _UT(','):
-	case _UT(';'):
-	case _UT('\''):
-	case _UT('+'):
-	case _UT('='):
-	case _UT('.'):
-	case _UT('_'):
-	case _UT('~'):
-	case _UT('-'):
-	case _UT('@'):
-		state->uri->scheme.first = first; /* SCHEME BEGIN */
-		return URI_FUNC(ParseMustBeSegmentNzNc)(state, first + 1, afterLast);
-
-	case _UT('%'):
-		{
-			const URI_CHAR * const afterPctEncoded
-					= URI_FUNC(ParsePctEncoded)(state, first, afterLast);
-			if (afterPctEncoded == NULL) {
-				return NULL;
-			}
-			state->uri->scheme.first = first; /* SCHEME BEGIN */
-			return URI_FUNC(ParseMustBeSegmentNzNc)(state, afterPctEncoded, afterLast);
-		}
-
-	case _UT('/'):
-		{
-			const URI_CHAR * const afterPartHelperTwo
-					= URI_FUNC(ParsePartHelperTwo)(state, first + 1, afterLast);
-			if (afterPartHelperTwo == NULL) {
-				return NULL;
-			}
-			return URI_FUNC(ParseUriTail)(state, afterPartHelperTwo, afterLast);
-		}
-
-	default:
-		return URI_FUNC(ParseUriTail)(state, first, afterLast);
-	}
-}
-
-
-
-/*
- * [uriTail]-><#>[queryFrag]
- * [uriTail]-><?>[queryFrag][uriTailTwo]
- * [uriTail]-><NULL>
- */
-static URI_INLINE const URI_CHAR * URI_FUNC(ParseUriTail)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast) {
-	if (first >= afterLast) {
-		return afterLast;
-	}
-
-	switch (*first) {
-	case _UT('#'):
-		{
-			const URI_CHAR * const afterQueryFrag = URI_FUNC(ParseQueryFrag)(state, first + 1, afterLast);
-			if (afterQueryFrag == NULL) {
-				return NULL;
-			}
-			state->uri->fragment.first = first + 1; /* FRAGMENT BEGIN */
-			state->uri->fragment.afterLast = afterQueryFrag; /* FRAGMENT END */
-			return afterQueryFrag;
-		}
-
-	case _UT('?'):
-		{
-			const URI_CHAR * const afterQueryFrag
-					= URI_FUNC(ParseQueryFrag)(state, first + 1, afterLast);
-			if (afterQueryFrag == NULL) {
-				return NULL;
-			}
-			state->uri->query.first = first + 1; /* QUERY BEGIN */
-			state->uri->query.afterLast = afterQueryFrag; /* QUERY END */
-			return URI_FUNC(ParseUriTailTwo)(state, afterQueryFrag, afterLast);
-		}
-
-	default:
-		return first;
-	}
-}
-
-
-
-/*
- * [uriTailTwo]-><#>[queryFrag]
- * [uriTailTwo]-><NULL>
- */
-static URI_INLINE const URI_CHAR * URI_FUNC(ParseUriTailTwo)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast) {
-	if (first >= afterLast) {
-		return afterLast;
-	}
-
-	switch (*first) {
-	case _UT('#'):
-		{
-			const URI_CHAR * const afterQueryFrag = URI_FUNC(ParseQueryFrag)(state, first + 1, afterLast);
-			if (afterQueryFrag == NULL) {
-				return NULL;
-			}
-			state->uri->fragment.first = first + 1; /* FRAGMENT BEGIN */
-			state->uri->fragment.afterLast = afterQueryFrag; /* FRAGMENT END */
-			return afterQueryFrag;
-		}
-
-	default:
-		return first;
-	}
-}
-
-
-
-/*
- * [zeroMoreSlashSegs]-></>[segment][zeroMoreSlashSegs]
- * [zeroMoreSlashSegs]-><NULL>
- */
-static const URI_CHAR * URI_FUNC(ParseZeroMoreSlashSegs)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast) {
-	if (first >= afterLast) {
-		return afterLast;
-	}
-
-	switch (*first) {
-	case _UT('/'):
-		{
-			const URI_CHAR * const afterSegment
-					= URI_FUNC(ParseSegment)(state, first + 1, afterLast);
-			if (afterSegment == NULL) {
-				return NULL;
-			}
-			if (!URI_FUNC(PushPathSegment)(state, first + 1, afterSegment)) { /* SEGMENT BOTH */
-				URI_FUNC(StopMalloc)(state);
-				return NULL;
-			}
-			return URI_FUNC(ParseZeroMoreSlashSegs)(state, afterSegment, afterLast);
-		}
-
-	default:
-		return first;
-	}
-}
-
-
-
-static URI_INLINE void URI_FUNC(ResetParserState)(URI_TYPE(ParserState) * state) {
-	URI_TYPE(Uri) * const uriBackup = state->uri;
-	memset(state, 0, sizeof(URI_TYPE(ParserState)));
-	state->uri = uriBackup;
-}
-
-
-
-static URI_INLINE UriBool URI_FUNC(PushPathSegment)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast) {
-	URI_TYPE(PathSegment) * segment = malloc(1 * sizeof(URI_TYPE(PathSegment)));
-	if (segment == NULL) {
-		return URI_FALSE; /* Raises malloc error */
-	}
-	memset(segment, 0, sizeof(URI_TYPE(PathSegment)));
-	if (first == afterLast) {
-		segment->text.first = URI_FUNC(SafeToPointTo);
-		segment->text.afterLast = URI_FUNC(SafeToPointTo);
-	} else {
-		segment->text.first = first;
-		segment->text.afterLast = afterLast;
-	}
-
-	/* First segment ever? */
-	if (state->uri->pathHead == NULL) {
-		/* First segement ever, set head and tail */
-		state->uri->pathHead = segment;
-		state->uri->pathTail = segment;
-	} else {
-		/* Append, update tail */
-		state->uri->pathTail->next = segment;
-		state->uri->pathTail = segment;
-	}
-
-	return URI_TRUE; /* Success */
-}
-
-
-
-int URI_FUNC(ParseUriEx)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast) {
-	const URI_CHAR * afterUriReference;
-	URI_TYPE(Uri) * uri;
-
-	/* Check params */
-	if ((state == NULL) || (state == NULL) || (state == NULL)) {
-		return URI_ERROR_NULL;
-	}
-	uri = state->uri;
-
-	/* Init parser */
-	URI_FUNC(ResetParserState)(state);
-	URI_FUNC(ResetUri)(uri);
-
-	/* Parse */
-	afterUriReference = URI_FUNC(ParseUriReference)(state, first, afterLast);
-	if (afterUriReference == NULL) {
-		return state->errorCode;
-	}
-	if (afterUriReference != afterLast) {
-		return URI_ERROR_SYNTAX;
-	}
-	return URI_SUCCESS;
-}
-
-
-
-int URI_FUNC(ParseUri)(URI_TYPE(ParserState) * state, const URI_CHAR * text) {
-	if ((state == NULL) || (text == NULL)) {
-		return URI_ERROR_NULL;
-	}
-	return URI_FUNC(ParseUriEx)(state, text, text + URI_STRLEN(text));
-}
-
-
-
-void URI_FUNC(FreeUriMembers)(URI_TYPE(Uri) * uri) {
-	if (uri == NULL) {
-		return;
-	}
-
-	if (uri->owner) {
-		/* Scheme */
-		if (uri->scheme.first != NULL) {
-			free((URI_CHAR *)uri->scheme.first);
-			uri->scheme.first = NULL;
-			uri->scheme.afterLast = NULL;
-		}
-
-		/* User info */
-		if (uri->userInfo.first != NULL) {
-			free((URI_CHAR *)uri->userInfo.first);
-			uri->userInfo.first = NULL;
-			uri->userInfo.afterLast = NULL;
-		}
-
-		/* Host data - IPvFuture */
-		if (uri->hostData.ipFuture.first != NULL) {
-			free((URI_CHAR *)uri->hostData.ipFuture.first);
-			uri->hostData.ipFuture.first = NULL;
-			uri->hostData.ipFuture.afterLast = NULL;
-			uri->hostText.first = NULL;
-			uri->hostText.afterLast = NULL;
-		}
-
-		/* Host text (if regname, after IPvFuture!) */
-		if ((uri->hostText.first != NULL)
-				&& (uri->hostData.ip4 == NULL)
-				&& (uri->hostData.ip6 == NULL)) {
-			/* Real regname */
-			free((URI_CHAR *)uri->hostText.first);
-			uri->hostText.first = NULL;
-			uri->hostText.afterLast = NULL;
-		}
-	}
-
-	/* Host data - IPv4 */
-	if (uri->hostData.ip4 != NULL) {
-		free(uri->hostData.ip4);
-		uri->hostData.ip4 = NULL;
-	}
-
-	/* Host data - IPv6 */
-	if (uri->hostData.ip6 != NULL) {
-		free(uri->hostData.ip6);
-		uri->hostData.ip6 = NULL;
-	}
-
-	/* Port text */
-	if (uri->owner && (uri->portText.first != NULL)) {
-		free((URI_CHAR *)uri->portText.first);
-		uri->portText.first = NULL;
-		uri->portText.afterLast = NULL;
-	}
-
-	/* Path */
-	if (uri->pathHead != NULL) {
-		URI_TYPE(PathSegment) * segWalk = uri->pathHead;
-		while (segWalk != NULL) {
-			URI_TYPE(PathSegment) * const next = segWalk->next;
-			if (uri->owner && (segWalk->text.first != NULL)
-					&& (segWalk->text.afterLast != NULL)
-					&& (segWalk->text.afterLast > segWalk->text.first)) {
-				free((URI_CHAR *)segWalk->text.first);
-			}
-			free(segWalk);
-			segWalk = next;
-		}
-		uri->pathHead = NULL;
-		uri->pathTail = NULL;
-	}
-
-	if (uri->owner) {
-		/* Query */
-		if (uri->query.first != NULL) {
-			free((URI_CHAR *)uri->query.first);
-			uri->query.first = NULL;
-			uri->query.afterLast = NULL;
-		}
-
-		/* Fragment */
-		if (uri->fragment.first != NULL) {
-			free((URI_CHAR *)uri->fragment.first);
-			uri->fragment.first = NULL;
-			uri->fragment.afterLast = NULL;
-		}
-	}
-}
-
-
-
-UriBool URI_FUNC(_TESTING_ONLY_ParseIpSix)(const URI_CHAR * text) {
-	URI_TYPE(Uri) uri;
-	URI_TYPE(ParserState) parser;
-	const URI_CHAR * const afterIpSix = text + URI_STRLEN(text);
-	const URI_CHAR * res;
-
-	URI_FUNC(ResetParserState)(&parser);
-	URI_FUNC(ResetUri)(&uri);
-	parser.uri = &uri;
-	parser.uri->hostData.ip6 = malloc(1 * sizeof(UriIp6));
-	res = URI_FUNC(ParseIPv6address2)(&parser, text, afterIpSix);
-	URI_FUNC(FreeUriMembers)(&uri);
-	return res == afterIpSix ? URI_TRUE : URI_FALSE;
-}
-
-
-
-UriBool URI_FUNC(_TESTING_ONLY_ParseIpFour)(const URI_CHAR * text) {
-	unsigned char octets[4];
-	int res = URI_FUNC(ParseIpFourAddress)(octets, text, text + URI_STRLEN(text));
-	return (res == URI_SUCCESS) ? URI_TRUE : URI_FALSE;
-}
-
-
-
-#undef URI_SET_DIGIT
-#undef URI_SET_HEX_LETTER_UPPER
-#undef URI_SET_HEX_LETTER_LOWER
-#undef URI_SET_HEXDIG
-#undef URI_SET_ALPHA
-
-
-
-#endif
+/*
+ * uriparser - RFC 3986 URI parsing library
+ *
+ * Copyright (C) 2007, Weijia Song <songweijia@gmail.com>
+ * Copyright (C) 2007, Sebastian Pipping <webmaster@hartwork.org>
+ * All rights reserved.
+ *
+ * Redistribution  and use in source and binary forms, with or without
+ * modification,  are permitted provided that the following conditions
+ * are met:
+ *
+ *     * Redistributions   of  source  code  must  retain  the   above
+ *       copyright  notice, this list of conditions and the  following
+ *       disclaimer.
+ *
+ *     * Redistributions  in  binary  form must  reproduce  the  above
+ *       copyright  notice, this list of conditions and the  following
+ *       disclaimer   in  the  documentation  and/or  other  materials
+ *       provided with the distribution.
+ *
+ *     * Neither  the name of the <ORGANIZATION> nor the names of  its
+ *       contributors  may  be  used to endorse  or  promote  products
+ *       derived  from  this software without specific  prior  written
+ *       permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS  IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT  NOT
+ * LIMITED  TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND  FITNESS
+ * FOR  A  PARTICULAR  PURPOSE ARE DISCLAIMED. IN NO EVENT  SHALL  THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL,    SPECIAL,   EXEMPLARY,   OR   CONSEQUENTIAL   DAMAGES
+ * (INCLUDING,  BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES;  LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT  LIABILITY,  OR  TORT (INCLUDING  NEGLIGENCE  OR  OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/**
+ * @file UriParse.c
+ * Holds the RFC 3986 %URI parsing implementation.
+ * NOTE: This source file includes itself twice.
+ */
+
+/* What encodings are enabled? */
+#include <uriparser/UriDefsConfig.h>
+#if (!defined(URI_PASS_ANSI) && !defined(URI_PASS_UNICODE))
+/* Include SELF twice */
+# define URI_PASS_ANSI 1
+# include "UriParse.c"
+# undef URI_PASS_ANSI
+# define URI_PASS_UNICODE 1
+# include "UriParse.c"
+# undef URI_PASS_UNICODE
+#else
+# ifdef URI_PASS_ANSI
+#  include <uriparser/UriDefsAnsi.h>
+# else
+#  include <uriparser/UriDefsUnicode.h>
+#  include <wchar.h>
+# endif
+
+
+
+#ifndef URI_DOXYGEN
+# include <uriparser/Uri.h>
+# include <uriparser/UriIp4.h>
+# include "UriCommon.h"
+# include "UriParseBase.h"
+#endif
+
+
+
+#define URI_SET_DIGIT \
+	     _UT('0'): \
+	case _UT('1'): \
+	case _UT('2'): \
+	case _UT('3'): \
+	case _UT('4'): \
+	case _UT('5'): \
+	case _UT('6'): \
+	case _UT('7'): \
+	case _UT('8'): \
+	case _UT('9')
+
+#define URI_SET_HEX_LETTER_UPPER \
+	     _UT('A'): \
+	case _UT('B'): \
+	case _UT('C'): \
+	case _UT('D'): \
+	case _UT('E'): \
+	case _UT('F')
+
+#define URI_SET_HEX_LETTER_LOWER \
+	     _UT('a'): \
+	case _UT('b'): \
+	case _UT('c'): \
+	case _UT('d'): \
+	case _UT('e'): \
+	case _UT('f')
+
+#define URI_SET_HEXDIG \
+	URI_SET_DIGIT: \
+	case URI_SET_HEX_LETTER_UPPER: \
+	case URI_SET_HEX_LETTER_LOWER
+
+#define URI_SET_ALPHA \
+	URI_SET_HEX_LETTER_UPPER: \
+	case URI_SET_HEX_LETTER_LOWER: \
+	case _UT('g'): \
+	case _UT('G'): \
+	case _UT('h'): \
+	case _UT('H'): \
+	case _UT('i'): \
+	case _UT('I'): \
+	case _UT('j'): \
+	case _UT('J'): \
+	case _UT('k'): \
+	case _UT('K'): \
+	case _UT('l'): \
+	case _UT('L'): \
+	case _UT('m'): \
+	case _UT('M'): \
+	case _UT('n'): \
+	case _UT('N'): \
+	case _UT('o'): \
+	case _UT('O'): \
+	case _UT('p'): \
+	case _UT('P'): \
+	case _UT('q'): \
+	case _UT('Q'): \
+	case _UT('r'): \
+	case _UT('R'): \
+	case _UT('s'): \
+	case _UT('S'): \
+	case _UT('t'): \
+	case _UT('T'): \
+	case _UT('u'): \
+	case _UT('U'): \
+	case _UT('v'): \
+	case _UT('V'): \
+	case _UT('w'): \
+	case _UT('W'): \
+	case _UT('x'): \
+	case _UT('X'): \
+	case _UT('y'): \
+	case _UT('Y'): \
+	case _UT('z'): \
+	case _UT('Z')
+
+
+
+static const URI_CHAR * URI_FUNC(ParseAuthority)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast);
+static const URI_CHAR * URI_FUNC(ParseAuthorityTwo)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast);
+static const URI_CHAR * URI_FUNC(ParseHexZero)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast);
+static const URI_CHAR * URI_FUNC(ParseHierPart)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast);
+static const URI_CHAR * URI_FUNC(ParseIpFutLoop)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast);
+static const URI_CHAR * URI_FUNC(ParseIpFutStopGo)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast);
+static const URI_CHAR * URI_FUNC(ParseIpLit2)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast);
+static const URI_CHAR * URI_FUNC(ParseIPv6address2)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast);
+static const URI_CHAR * URI_FUNC(ParseMustBeSegmentNzNc)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast);
+static const URI_CHAR * URI_FUNC(ParseOwnHost)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast);
+static const URI_CHAR * URI_FUNC(ParseOwnHost2)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast);
+static const URI_CHAR * URI_FUNC(ParseOwnHostUserInfo)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast);
+static const URI_CHAR * URI_FUNC(ParseOwnHostUserInfoNz)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast);
+static const URI_CHAR * URI_FUNC(ParseOwnPortUserInfo)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast);
+static const URI_CHAR * URI_FUNC(ParseOwnUserInfo)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast);
+static const URI_CHAR * URI_FUNC(ParsePartHelperTwo)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast);
+static const URI_CHAR * URI_FUNC(ParsePathAbsEmpty)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast);
+static const URI_CHAR * URI_FUNC(ParsePathAbsNoLeadSlash)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast);
+static const URI_CHAR * URI_FUNC(ParsePathRootless)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast);
+static const URI_CHAR * URI_FUNC(ParsePchar)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast);
+static const URI_CHAR * URI_FUNC(ParsePctEncoded)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast);
+static const URI_CHAR * URI_FUNC(ParsePctSubUnres)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast);
+static const URI_CHAR * URI_FUNC(ParsePort)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast);
+static const URI_CHAR * URI_FUNC(ParseQueryFrag)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast);
+static const URI_CHAR * URI_FUNC(ParseSegment)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast);
+static const URI_CHAR * URI_FUNC(ParseSegmentNz)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast);
+static const URI_CHAR * URI_FUNC(ParseSegmentNzNcOrScheme2)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast);
+static const URI_CHAR * URI_FUNC(ParseUriReference)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast);
+static const URI_CHAR * URI_FUNC(ParseUriTail)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast);
+static const URI_CHAR * URI_FUNC(ParseUriTailTwo)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast);
+static const URI_CHAR * URI_FUNC(ParseZeroMoreSlashSegs)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast);
+
+static UriBool URI_FUNC(OnExitOwnHost2)(URI_TYPE(ParserState) * state, const URI_CHAR * first);
+static UriBool URI_FUNC(OnExitOwnHostUserInfo)(URI_TYPE(ParserState) * state, const URI_CHAR * first);
+static UriBool URI_FUNC(OnExitOwnPortUserInfo)(URI_TYPE(ParserState) * state, const URI_CHAR * first);
+static UriBool URI_FUNC(OnExitSegmentNzNcOrScheme2)(URI_TYPE(ParserState) * state, const URI_CHAR * first);
+static void URI_FUNC(OnExitPartHelperTwo)(URI_TYPE(ParserState) * state);
+
+static void URI_FUNC(ResetParserState)(URI_TYPE(ParserState) * state);
+
+static UriBool URI_FUNC(PushPathSegment)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast);
+
+static void URI_FUNC(StopSyntax)(URI_TYPE(ParserState) * state, const URI_CHAR * errorPos);
+static void URI_FUNC(StopMalloc)(URI_TYPE(ParserState) * state);
+
+
+
+static URI_INLINE void URI_FUNC(StopSyntax)(URI_TYPE(ParserState) * state,
+		const URI_CHAR * errorPos) {
+	URI_FUNC(FreeUriMembers)(state->uri);
+	state->errorPos = errorPos;
+	state->errorCode = URI_ERROR_SYNTAX;
+}
+
+
+
+static URI_INLINE void URI_FUNC(StopMalloc)(URI_TYPE(ParserState) * state) {
+	URI_FUNC(FreeUriMembers)(state->uri);
+	state->errorPos = NULL;
+	state->errorCode = URI_ERROR_MALLOC;
+}
+
+
+
+/*
+ * [authority]-><[>[ipLit2][authorityTwo]
+ * [authority]->[ownHostUserInfoNz]
+ * [authority]-><NULL>
+ */
+static URI_INLINE const URI_CHAR * URI_FUNC(ParseAuthority)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast) {
+	if (first >= afterLast) {
+		/* "" regname host */
+		state->uri->hostText.first = URI_FUNC(SafeToPointTo);
+		state->uri->hostText.afterLast = URI_FUNC(SafeToPointTo);
+		return afterLast;
+	}
+
+	switch (*first) {
+	case _UT('['):
+		{
+			const URI_CHAR * const afterIpLit2
+					= URI_FUNC(ParseIpLit2)(state, first + 1, afterLast);
+			if (afterIpLit2 == NULL) {
+				return NULL;
+			}
+			state->uri->hostText.first = first + 1; /* HOST BEGIN */
+			return URI_FUNC(ParseAuthorityTwo)(state, afterIpLit2, afterLast);
+		}
+
+	case _UT('!'):
+	case _UT('$'):
+	case _UT('%'):
+	case _UT('&'):
+	case _UT('('):
+	case _UT(')'):
+	case _UT('-'):
+	case _UT('*'):
+	case _UT(','):
+	case _UT('.'):
+	case _UT(':'):
+	case _UT(';'):
+	case _UT('@'):
+	case _UT('\''):
+	case _UT('_'):
+	case _UT('~'):
+	case _UT('+'):
+	case _UT('='):
+	case URI_SET_DIGIT:
+	case URI_SET_ALPHA:
+		state->uri->userInfo.first = first; /* USERINFO BEGIN */
+		return URI_FUNC(ParseOwnHostUserInfoNz)(state, first, afterLast);
+
+	default:
+		/* "" regname host */
+		state->uri->hostText.first = URI_FUNC(SafeToPointTo);
+		state->uri->hostText.afterLast = URI_FUNC(SafeToPointTo);
+		return first;
+	}
+}
+
+
+
+/*
+ * [authorityTwo]-><:>[port]
+ * [authorityTwo]-><NULL>
+ */
+static URI_INLINE const URI_CHAR * URI_FUNC(ParseAuthorityTwo)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast) {
+	if (first >= afterLast) {
+		return afterLast;
+	}
+
+	switch (*first) {
+	case _UT(':'):
+		{
+			const URI_CHAR * const afterPort = URI_FUNC(ParsePort)(state, first + 1, afterLast);
+			if (afterPort == NULL) {
+				return NULL;
+			}
+			state->uri->portText.first = first + 1; /* PORT BEGIN */
+			state->uri->portText.afterLast = afterPort; /* PORT END */
+			return afterPort;
+		}
+
+	default:
+		return first;
+	}
+}
+
+
+
+/*
+ * [hexZero]->[HEXDIG][hexZero]
+ * [hexZero]-><NULL>
+ */
+static const URI_CHAR * URI_FUNC(ParseHexZero)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast) {
+	if (first >= afterLast) {
+		return afterLast;
+	}
+
+	switch (*first) {
+	case URI_SET_HEXDIG:
+		return URI_FUNC(ParseHexZero)(state, first + 1, afterLast);
+
+	default:
+		return first;
+	}
+}
+
+
+
+/*
+ * [hierPart]->[pathRootless]
+ * [hierPart]-></>[partHelperTwo]
+ * [hierPart]-><NULL>
+ */
+static URI_INLINE const URI_CHAR * URI_FUNC(ParseHierPart)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast) {
+	if (first >= afterLast) {
+		return afterLast;
+	}
+
+	switch (*first) {
+	case _UT('!'):
+	case _UT('$'):
+	case _UT('%'):
+	case _UT('&'):
+	case _UT('('):
+	case _UT(')'):
+	case _UT('-'):
+	case _UT('*'):
+	case _UT(','):
+	case _UT('.'):
+	case _UT(':'):
+	case _UT(';'):
+	case _UT('@'):
+	case _UT('\''):
+	case _UT('_'):
+	case _UT('~'):
+	case _UT('+'):
+	case _UT('='):
+	case URI_SET_DIGIT:
+	case URI_SET_ALPHA:
+		return URI_FUNC(ParsePathRootless)(state, first, afterLast);
+
+	case _UT('/'):
+		return URI_FUNC(ParsePartHelperTwo)(state, first + 1, afterLast);
+
+	default:
+		return first;
+	}
+}
+
+
+
+/*
+ * [ipFutLoop]->[subDelims][ipFutStopGo]
+ * [ipFutLoop]->[unreserved][ipFutStopGo]
+ * [ipFutLoop]-><:>[ipFutStopGo]
+ */
+static const URI_CHAR * URI_FUNC(ParseIpFutLoop)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast) {
+	if (first >= afterLast) {
+		URI_FUNC(StopSyntax)(state, first);
+		return NULL;
+	}
+
+	switch (*first) {
+	case _UT('!'):
+	case _UT('$'):
+	case _UT('&'):
+	case _UT('('):
+	case _UT(')'):
+	case _UT('-'):
+	case _UT('*'):
+	case _UT(','):
+	case _UT('.'):
+	case _UT(':'):
+	case _UT(';'):
+	case _UT('\''):
+	case _UT('_'):
+	case _UT('~'):
+	case _UT('+'):
+	case _UT('='):
+	case URI_SET_DIGIT:
+	case URI_SET_ALPHA:
+		return URI_FUNC(ParseIpFutStopGo)(state, first + 1, afterLast);
+
+	default:
+		URI_FUNC(StopSyntax)(state, first);
+		return NULL;
+	}
+}
+
+
+
+/*
+ * [ipFutStopGo]->[ipFutLoop]
+ * [ipFutStopGo]-><NULL>
+ */
+static const URI_CHAR * URI_FUNC(ParseIpFutStopGo)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast) {
+	if (first >= afterLast) {
+		return afterLast;
+	}
+
+	switch (*first) {
+	case _UT('!'):
+	case _UT('$'):
+	case _UT('&'):
+	case _UT('('):
+	case _UT(')'):
+	case _UT('-'):
+	case _UT('*'):
+	case _UT(','):
+	case _UT('.'):
+	case _UT(':'):
+	case _UT(';'):
+	case _UT('\''):
+	case _UT('_'):
+	case _UT('~'):
+	case _UT('+'):
+	case _UT('='):
+	case URI_SET_DIGIT:
+	case URI_SET_ALPHA:
+		return URI_FUNC(ParseIpFutLoop)(state, first, afterLast);
+
+	default:
+		return first;
+	}
+}
+
+
+
+/*
+ * [ipFuture]-><v>[HEXDIG][hexZero]<.>[ipFutLoop]
+ */
+static const URI_CHAR * URI_FUNC(ParseIpFuture)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast) {
+	if (first >= afterLast) {
+		URI_FUNC(StopSyntax)(state, first);
+		return NULL;
+	}
+
+	/*
+	First character has already been
+	checked before entering this rule.
+
+	switch (*first) {
+	case _UT('v'):
+	*/
+		if (first + 1 >= afterLast) {
+			URI_FUNC(StopSyntax)(state, first + 1);
+			return NULL;
+		}
+
+		switch (first[1]) {
+		case URI_SET_HEXDIG:
+			{
+				const URI_CHAR * afterIpFutLoop;
+				const URI_CHAR * const afterHexZero
+						= URI_FUNC(ParseHexZero)(state, first + 2, afterLast);
+				if (afterHexZero == NULL) {
+					return NULL;
+				}
+				if ((afterHexZero >= afterLast)
+						|| (*afterHexZero != _UT('.'))) {
+					URI_FUNC(StopSyntax)(state, afterHexZero);
+					return NULL;
+				}
+				state->uri->hostText.first = first; /* HOST BEGIN */
+				state->uri->hostData.ipFuture.first = first; /* IPFUTURE BEGIN */
+				afterIpFutLoop = URI_FUNC(ParseIpFutLoop)(state, afterHexZero + 1, afterLast);
+				if (afterIpFutLoop == NULL) {
+					return NULL;
+				}
+				state->uri->hostText.afterLast = afterIpFutLoop; /* HOST END */
+				state->uri->hostData.ipFuture.afterLast = afterIpFutLoop; /* IPFUTURE END */
+				return afterIpFutLoop;
+			}
+
+		default:
+			URI_FUNC(StopSyntax)(state, first + 1);
+			return NULL;
+		}
+
+	/*
+	default:
+		URI_FUNC(StopSyntax)(state, first);
+		return NULL;
+	}
+	*/
+}
+
+
+
+/*
+ * [ipLit2]->[ipFuture]<]>
+ * [ipLit2]->[IPv6address2]
+ */
+static URI_INLINE const URI_CHAR * URI_FUNC(ParseIpLit2)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast) {
+	if (first >= afterLast) {
+		URI_FUNC(StopSyntax)(state, first);
+		return NULL;
+	}
+
+	switch (*first) {
+	case _UT('v'):
+		{
+			const URI_CHAR * const afterIpFuture
+					= URI_FUNC(ParseIpFuture)(state, first, afterLast);
+			if (afterIpFuture == NULL) {
+				return NULL;
+			}
+			if ((afterIpFuture >= afterLast)
+					|| (*afterIpFuture != _UT(']'))) {
+				URI_FUNC(StopSyntax)(state, first);
+				return NULL;
+			}
+			return afterIpFuture + 1;
+		}
+
+	case _UT(':'):
+	case _UT(']'):
+	case URI_SET_HEXDIG:
+		state->uri->hostData.ip6 = malloc(1 * sizeof(UriIp6)); /* Freed when stopping on parse error */
+		if (state->uri->hostData.ip6 == NULL) {
+			URI_FUNC(StopMalloc)(state);
+			return NULL;
+		}
+		return URI_FUNC(ParseIPv6address2)(state, first, afterLast);
+
+	default:
+		URI_FUNC(StopSyntax)(state, first);
+		return NULL;
+	}
+}
+
+
+
+/*
+ * [IPv6address2]->..<]>
+ */
+static const URI_CHAR * URI_FUNC(ParseIPv6address2)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast) {
+	int zipperEver = 0;
+	int quadsDone = 0;
+	int digitCount = 0;
+	unsigned char digitHistory[4];
+	int ip4OctetsDone = 0;
+
+	unsigned char quadsAfterZipper[14];
+	int quadsAfterZipperCount = 0;
+
+
+	for (;;) {
+		if (first >= afterLast) {
+			URI_FUNC(StopSyntax)(state, first);
+			return NULL;
+		}
+
+		/* Inside IPv4 part? */
+		if (ip4OctetsDone > 0) {
+			/* Eat rest of IPv4 address */
+			for (;;) {
+				switch (*first) {
+				case URI_SET_DIGIT:
+					if (digitCount == 4) {
+						URI_FUNC(StopSyntax)(state, first);
+						return NULL;
+					}
+					digitHistory[digitCount++] = (unsigned char)(9 + *first - _UT('9'));
+					break;
+
+				case _UT('.'):
+					if ((ip4OctetsDone == 4) /* NOTE! */
+							|| (digitCount == 0)
+							|| (digitCount == 4)) {
+						/* Invalid digit or octet count */
+						URI_FUNC(StopSyntax)(state, first);
+						return NULL;
+					} else if ((digitCount > 1)
+							&& (digitHistory[0] == 0)) {
+						/* Leading zero */
+						URI_FUNC(StopSyntax)(state, first - digitCount);
+						return NULL;
+					} else if ((digitCount > 2)
+							&& (digitHistory[1] == 0)) {
+						/* Leading zero */
+						URI_FUNC(StopSyntax)(state, first - digitCount + 1);
+						return NULL;
+					} else if ((digitCount == 3)
+							&& (100 * digitHistory[0]
+								+ 10 * digitHistory[1]
+								+ digitHistory[2] > 255)) {
+						/* Octet value too large */
+						if (digitHistory[0] > 2) {
+							URI_FUNC(StopSyntax)(state, first - 3);
+						} else if (digitHistory[1] > 5) {
+							URI_FUNC(StopSyntax)(state, first - 2);
+						} else {
+							URI_FUNC(StopSyntax)(state, first - 1);
+						}
+						return NULL;
+					}
+
+					/* Copy IPv4 octet */
+					state->uri->hostData.ip6->data[16 - 4 + ip4OctetsDone] = uriGetOctetValue(digitHistory, digitCount);
+					digitCount = 0;
+					ip4OctetsDone++;
+					break;
+
+				case _UT(']'):
+					if ((ip4OctetsDone != 3) /* NOTE! */
+							|| (digitCount == 0)
+							|| (digitCount == 4)) {
+						/* Invalid digit or octet count */
+						URI_FUNC(StopSyntax)(state, first);
+						return NULL;
+					} else if ((digitCount > 1)
+							&& (digitHistory[0] == 0)) {
+						/* Leading zero */
+						URI_FUNC(StopSyntax)(state, first - digitCount);
+						return NULL;
+					} else if ((digitCount > 2)
+							&& (digitHistory[1] == 0)) {
+						/* Leading zero */
+						URI_FUNC(StopSyntax)(state, first - digitCount + 1);
+						return NULL;
+					} else if ((digitCount == 3)
+							&& (100 * digitHistory[0]
+								+ 10 * digitHistory[1]
+								+ digitHistory[2] > 255)) {
+						/* Octet value too large */
+						if (digitHistory[0] > 2) {
+							URI_FUNC(StopSyntax)(state, first - 3);
+						} else if (digitHistory[1] > 5) {
+							URI_FUNC(StopSyntax)(state, first - 2);
+						} else {
+							URI_FUNC(StopSyntax)(state, first - 1);
+						}
+						return NULL;
+					}
+
+					state->uri->hostText.afterLast = first; /* HOST END */
+
+					/* Copy missing quads right before IPv4 */
+					memcpy(state->uri->hostData.ip6->data + 16 - 4 - 2 * quadsAfterZipperCount,
+								quadsAfterZipper, 2 * quadsAfterZipperCount);
+
+					/* Copy last IPv4 octet */
+					state->uri->hostData.ip6->data[16 - 4 + 3] = uriGetOctetValue(digitHistory, digitCount);
+
+					return first + 1;
+
+				default:
+					URI_FUNC(StopSyntax)(state, first);
+					return NULL;
+				}
+				first++;
+			}
+		} else {
+			/* Eat while no dot in sight */
+			int letterAmong = 0;
+			int walking = 1;
+			do {
+				switch (*first) {
+				case URI_SET_HEX_LETTER_LOWER:
+					letterAmong = 1;
+					if (digitCount == 4) {
+						URI_FUNC(StopSyntax)(state, first);
+						return NULL;
+					}
+					digitHistory[digitCount] = (unsigned char)(15 + *first - _UT('f'));
+					digitCount++;
+					break;
+
+				case URI_SET_HEX_LETTER_UPPER:
+					letterAmong = 1;
+					if (digitCount == 4) {
+						URI_FUNC(StopSyntax)(state, first);
+						return NULL;
+					}
+					digitHistory[digitCount] = (unsigned char)(15 + *first - _UT('F'));
+					digitCount++;
+					break;
+
+				case URI_SET_DIGIT:
+					if (digitCount == 4) {
+						URI_FUNC(StopSyntax)(state, first);
+						return NULL;
+					}
+					digitHistory[digitCount] = (unsigned char)(9 + *first - _UT('9'));
+					digitCount++;
+					break;
+
+				case _UT(':'):
+					{
+						int setZipper = 0;
+
+						/* Too many quads? */
+						if (quadsDone > 8 - zipperEver) {
+							URI_FUNC(StopSyntax)(state, first);
+							return NULL;
+						}
+
+						/* "::"? */
+						if (first + 1 >= afterLast) {
+							URI_FUNC(StopSyntax)(state, first + 1);
+							return NULL;
+						}
+						if (first[1] == _UT(':')) {
+							const int resetOffset = 2 * (quadsDone + (digitCount > 0));
+
+							first++;
+							if (zipperEver) {
+								URI_FUNC(StopSyntax)(state, first);
+								return NULL; /* "::.+::" */
+							}
+
+							/* Zero everything after zipper */
+							memset(state->uri->hostData.ip6->data + resetOffset, 0, 16 - resetOffset);
+							setZipper = 1;
+
+							/* ":::+"? */
+							if (first + 1 >= afterLast) {
+								URI_FUNC(StopSyntax)(state, first + 1);
+								return NULL; /* No ']' yet */
+							}
+							if (first[1] == _UT(':')) {
+								URI_FUNC(StopSyntax)(state, first + 1);
+								return NULL; /* ":::+ "*/
+							}
+						}
+						if (digitCount > 0) {
+							if (zipperEver) {
+								uriWriteQuadToDoubleByte(digitHistory, digitCount, quadsAfterZipper + 2 * quadsAfterZipperCount);
+								quadsAfterZipperCount++;
+							} else {
+								uriWriteQuadToDoubleByte(digitHistory, digitCount, state->uri->hostData.ip6->data + 2 * quadsDone);
+							}
+							quadsDone++;
+							digitCount = 0;
+						}
+						letterAmong = 0;
+
+						if (setZipper) {
+							zipperEver = 1;
+						}
+					}
+					break;
+
+				case _UT('.'):
+					if ((quadsDone > 6) /* NOTE */
+							|| (!zipperEver && (quadsDone < 6))
+							|| letterAmong
+							|| (digitCount == 0)
+							|| (digitCount == 4)) {
+						/* Invalid octet before */
+						URI_FUNC(StopSyntax)(state, first);
+						return NULL;
+					} else if ((digitCount > 1)
+							&& (digitHistory[0] == 0)) {
+						/* Leading zero */
+						URI_FUNC(StopSyntax)(state, first - digitCount);
+						return NULL;
+					} else if ((digitCount > 2)
+							&& (digitHistory[1] == 0)) {
+						/* Leading zero */
+						URI_FUNC(StopSyntax)(state, first - digitCount + 1);
+						return NULL;
+					} else if ((digitCount == 3)
+							&& (100 * digitHistory[0]
+								+ 10 * digitHistory[1]
+								+ digitHistory[2] > 255)) {
+						/* Octet value too large */
+						if (digitHistory[0] > 2) {
+							URI_FUNC(StopSyntax)(state, first - 3);
+						} else if (digitHistory[1] > 5) {
+							URI_FUNC(StopSyntax)(state, first - 2);
+						} else {
+							URI_FUNC(StopSyntax)(state, first - 1);
+						}
+						return NULL;
+					}
+
+					/* Copy first IPv4 octet */
+					state->uri->hostData.ip6->data[16 - 4] = uriGetOctetValue(digitHistory, digitCount);
+					digitCount = 0;
+
+					/* Switch over to IPv4 loop */
+					ip4OctetsDone = 1;
+					walking = 0;
+					break;
+
+				case _UT(']'):
+					/* Too little quads? */
+					if (!zipperEver && !((quadsDone == 7) && (digitCount > 0))) {
+						URI_FUNC(StopSyntax)(state, first);
+						return NULL;
+					}
+
+					if (digitCount > 0) {
+						if (zipperEver) {
+							uriWriteQuadToDoubleByte(digitHistory, digitCount, quadsAfterZipper + 2 * quadsAfterZipperCount);
+							quadsAfterZipperCount++;
+						} else {
+							uriWriteQuadToDoubleByte(digitHistory, digitCount, state->uri->hostData.ip6->data + 2 * quadsDone);
+						}
+						/*
+						quadsDone++;
+						digitCount = 0;
+						*/
+					}
+
+					/* Copy missing quads to the end */
+					memcpy(state->uri->hostData.ip6->data + 16 - 2 * quadsAfterZipperCount,
+								quadsAfterZipper, 2 * quadsAfterZipperCount);
+
+					state->uri->hostText.afterLast = first; /* HOST END */
+					return first + 1; /* Fine */
+
+				default:
+					URI_FUNC(StopSyntax)(state, first);
+					return NULL;
+				}
+				first++;
+
+				if (first >= afterLast) {
+					URI_FUNC(StopSyntax)(state, first);
+					return NULL; /* No ']' yet */
+				}
+			} while (walking);
+		}
+	}
+}
+
+
+
+/*
+ * [mustBeSegmentNzNc]->[pctEncoded][mustBeSegmentNzNc]
+ * [mustBeSegmentNzNc]->[subDelims][mustBeSegmentNzNc]
+ * [mustBeSegmentNzNc]->[unreserved][mustBeSegmentNzNc]
+ * [mustBeSegmentNzNc]->[uriTail] // can take <NULL>
+ * [mustBeSegmentNzNc]-></>[segment][zeroMoreSlashSegs][uriTail]
+ * [mustBeSegmentNzNc]-><@>[mustBeSegmentNzNc]
+ */
+static const URI_CHAR * URI_FUNC(ParseMustBeSegmentNzNc)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast) {
+	if (first >= afterLast) {
+		if (!URI_FUNC(PushPathSegment)(state, state->uri->scheme.first, first)) { /* SEGMENT BOTH */
+			URI_FUNC(StopMalloc)(state);
+			return NULL;
+		}
+		state->uri->scheme.first = NULL; /* Not a scheme, reset */
+		return afterLast;
+	}
+
+	switch (*first) {
+	case _UT('%'):
+		{
+			const URI_CHAR * const afterPctEncoded
+					= URI_FUNC(ParsePctEncoded)(state, first, afterLast);
+			if (afterPctEncoded == NULL) {
+				return NULL;
+			}
+			return URI_FUNC(ParseMustBeSegmentNzNc)(state, afterPctEncoded, afterLast);
+		}
+
+	case _UT('@'):
+	case _UT('!'):
+	case _UT('$'):
+	case _UT('&'):
+	case _UT('('):
+	case _UT(')'):
+	case _UT('*'):
+	case _UT(','):
+	case _UT(';'):
+	case _UT('\''):
+	case _UT('+'):
+	case _UT('='):
+	case _UT('-'):
+	case _UT('.'):
+	case _UT('_'):
+	case _UT('~'):
+	case URI_SET_DIGIT:
+	case URI_SET_ALPHA:
+		return URI_FUNC(ParseMustBeSegmentNzNc)(state, first + 1, afterLast);
+
+	case _UT('/'):
+		{
+			const URI_CHAR * afterZeroMoreSlashSegs;
+			const URI_CHAR * afterSegment;
+			if (!URI_FUNC(PushPathSegment)(state, state->uri->scheme.first, first)) { /* SEGMENT BOTH */
+				URI_FUNC(StopMalloc)(state);
+				return NULL;
+			}
+			state->uri->scheme.first = NULL; /* Not a scheme, reset */
+			afterSegment = URI_FUNC(ParseSegment)(state, first + 1, afterLast);
+			if (afterSegment == NULL) {
+				return NULL;
+			}
+			if (!URI_FUNC(PushPathSegment)(state, first + 1, afterSegment)) { /* SEGMENT BOTH */
+				URI_FUNC(StopMalloc)(state);
+				return NULL;
+			}
+			afterZeroMoreSlashSegs
+					= URI_FUNC(ParseZeroMoreSlashSegs)(state, afterSegment, afterLast);
+			if (afterZeroMoreSlashSegs == NULL) {
+				return NULL;
+			}
+			return URI_FUNC(ParseUriTail)(state, afterZeroMoreSlashSegs, afterLast);
+		}
+
+	default:
+		if (!URI_FUNC(PushPathSegment)(state, state->uri->scheme.first, first)) { /* SEGMENT BOTH */
+			URI_FUNC(StopMalloc)(state);
+			return NULL;
+		}
+		state->uri->scheme.first = NULL; /* Not a scheme, reset */
+		return URI_FUNC(ParseUriTail)(state, first, afterLast);
+	}
+}
+
+
+
+/*
+ * [ownHost]-><[>[ipLit2][authorityTwo]
+ * [ownHost]->[ownHost2] // can take <NULL>
+ */
+static URI_INLINE const URI_CHAR * URI_FUNC(ParseOwnHost)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast) {
+	if (first >= afterLast) {
+		return afterLast;
+	}
+
+	switch (*first) {
+	case _UT('['):
+		{
+			const URI_CHAR * const afterIpLit2
+					= URI_FUNC(ParseIpLit2)(state, first + 1, afterLast);
+			if (afterIpLit2 == NULL) {
+				return NULL;
+			}
+			state->uri->hostText.first = first + 1; /* HOST BEGIN */
+			return URI_FUNC(ParseAuthorityTwo)(state, afterIpLit2, afterLast);
+		}
+
+	default:
+		return URI_FUNC(ParseOwnHost2)(state, first, afterLast);
+	}
+}
+
+
+
+static URI_INLINE UriBool URI_FUNC(OnExitOwnHost2)(URI_TYPE(ParserState) * state, const URI_CHAR * first) {
+	state->uri->hostText.afterLast = first; /* HOST END */
+
+	/* Valid IPv4 or just a regname? */
+	state->uri->hostData.ip4 = malloc(1 * sizeof(UriIp4)); /* Freed when stopping on parse error */
+	if (state->uri->hostData.ip4 == NULL) {
+		return URI_FALSE; /* Raises malloc error */
+	}
+	if (URI_FUNC(ParseIpFourAddress)(state->uri->hostData.ip4->data,
+			state->uri->hostText.first, state->uri->hostText.afterLast)) {
+		/* Not IPv4 */
+		free(state->uri->hostData.ip4);
+		state->uri->hostData.ip4 = NULL;
+	}
+	return URI_TRUE; /* Success */
+}
+
+
+
+/*
+ * [ownHost2]->[authorityTwo] // can take <NULL>
+ * [ownHost2]->[pctSubUnres][ownHost2]
+ */
+static const URI_CHAR * URI_FUNC(ParseOwnHost2)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast) {
+	if (first >= afterLast) {
+		if (!URI_FUNC(OnExitOwnHost2)(state, first)) {
+			URI_FUNC(StopMalloc)(state);
+			return NULL;
+		}
+		return afterLast;
+	}
+
+	switch (*first) {
+	case _UT('!'):
+	case _UT('$'):
+	case _UT('%'):
+	case _UT('&'):
+	case _UT('('):
+	case _UT(')'):
+	case _UT('-'):
+	case _UT('*'):
+	case _UT(','):
+	case _UT('.'):
+	case _UT(';'):
+	case _UT('\''):
+	case _UT('_'):
+	case _UT('~'):
+	case _UT('+'):
+	case _UT('='):
+	case URI_SET_DIGIT:
+	case URI_SET_ALPHA:
+		{
+			const URI_CHAR * const afterPctSubUnres
+					= URI_FUNC(ParsePctSubUnres)(state, first, afterLast);
+			if (afterPctSubUnres == NULL) {
+				return NULL;
+			}
+			return URI_FUNC(ParseOwnHost2)(state, afterPctSubUnres, afterLast);
+		}
+
+	default:
+		if (!URI_FUNC(OnExitOwnHost2)(state, first)) {
+			URI_FUNC(StopMalloc)(state);
+			return NULL;
+		}
+		return URI_FUNC(ParseAuthorityTwo)(state, first, afterLast);
+	}
+}
+
+
+
+static URI_INLINE UriBool URI_FUNC(OnExitOwnHostUserInfo)(URI_TYPE(ParserState) * state, const URI_CHAR * first) {
+	state->uri->hostText.first = state->uri->userInfo.first; /* Host instead of userInfo, update */
+	state->uri->userInfo.first = NULL; /* Not a userInfo, reset */
+	state->uri->hostText.afterLast = first; /* HOST END */
+
+	/* Valid IPv4 or just a regname? */
+	state->uri->hostData.ip4 = malloc(1 * sizeof(UriIp4)); /* Freed when stopping on parse error */
+	if (state->uri->hostData.ip4 == NULL) {
+		return URI_FALSE; /* Raises malloc error */
+	}
+	if (URI_FUNC(ParseIpFourAddress)(state->uri->hostData.ip4->data,
+			state->uri->hostText.first, state->uri->hostText.afterLast)) {
+		/* Not IPv4 */
+		free(state->uri->hostData.ip4);
+		state->uri->hostData.ip4 = NULL;
+	}
+	return URI_TRUE; /* Success */
+}
+
+
+
+/*
+ * [ownHostUserInfo]->[ownHostUserInfoNz]
+ * [ownHostUserInfo]-><NULL>
+ */
+static URI_INLINE const URI_CHAR * URI_FUNC(ParseOwnHostUserInfo)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast) {
+	if (first >= afterLast) {
+		if (!URI_FUNC(OnExitOwnHostUserInfo)(state, first)) {
+			URI_FUNC(StopMalloc)(state);
+			return NULL;
+		}
+		return afterLast;
+	}
+
+	switch (*first) {
+	case _UT('!'):
+	case _UT('$'):
+	case _UT('%'):
+	case _UT('&'):
+	case _UT('('):
+	case _UT(')'):
+	case _UT('-'):
+	case _UT('*'):
+	case _UT(','):
+	case _UT('.'):
+	case _UT(':'):
+	case _UT(';'):
+	case _UT('@'):
+	case _UT('\''):
+	case _UT('_'):
+	case _UT('~'):
+	case _UT('+'):
+	case _UT('='):
+	case URI_SET_DIGIT:
+	case URI_SET_ALPHA:
+		return URI_FUNC(ParseOwnHostUserInfoNz)(state, first, afterLast);
+
+	default:
+		if (!URI_FUNC(OnExitOwnHostUserInfo)(state, first)) {
+			URI_FUNC(StopMalloc)(state);
+			return NULL;
+		}
+		return first;
+	}
+}
+
+
+
+/*
+ * [ownHostUserInfoNz]->[pctSubUnres][ownHostUserInfo]
+ * [ownHostUserInfoNz]-><:>[ownPortUserInfo]
+ * [ownHostUserInfoNz]-><@>[ownHost]
+ */
+static const URI_CHAR * URI_FUNC(ParseOwnHostUserInfoNz)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast) {
+	if (first >= afterLast) {
+		URI_FUNC(StopSyntax)(state, first);
+		return NULL;
+	}
+
+	switch (*first) {
+	case _UT('!'):
+	case _UT('$'):
+	case _UT('%'):
+	case _UT('&'):
+	case _UT('('):
+	case _UT(')'):
+	case _UT('-'):
+	case _UT('*'):
+	case _UT(','):
+	case _UT('.'):
+	case _UT(';'):
+	case _UT('\''):
+	case _UT('_'):
+	case _UT('~'):
+	case _UT('+'):
+	case _UT('='):
+	case URI_SET_DIGIT:
+	case URI_SET_ALPHA:
+		{
+			const URI_CHAR * const afterPctSubUnres
+					= URI_FUNC(ParsePctSubUnres)(state, first, afterLast);
+			if (afterPctSubUnres == NULL) {
+				return NULL;
+			}
+			return URI_FUNC(ParseOwnHostUserInfo)(state, afterPctSubUnres, afterLast);
+		}
+
+	case _UT(':'):
+		state->uri->hostText.afterLast = first; /* HOST END */
+		state->uri->portText.first = first + 1; /* PORT BEGIN */
+		return URI_FUNC(ParseOwnPortUserInfo)(state, first + 1, afterLast);
+
+	case _UT('@'):
+		state->uri->userInfo.afterLast = first; /* USERINFO END */
+		state->uri->hostText.first = first + 1; /* HOST BEGIN */
+		return URI_FUNC(ParseOwnHost)(state, first + 1, afterLast);
+
+	default:
+		URI_FUNC(StopSyntax)(state, first);
+		return NULL;
+	}
+}
+
+
+
+static URI_INLINE UriBool URI_FUNC(OnExitOwnPortUserInfo)(URI_TYPE(ParserState) * state, const URI_CHAR * first) {
+	state->uri->hostText.first = state->uri->userInfo.first; /* Host instead of userInfo, update */
+	state->uri->userInfo.first = NULL; /* Not a userInfo, reset */
+	state->uri->portText.afterLast = first; /* PORT END */
+
+	/* Valid IPv4 or just a regname? */
+	state->uri->hostData.ip4 = malloc(1 * sizeof(UriIp4)); /* Freed when stopping on parse error */
+	if (state->uri->hostData.ip4 == NULL) {
+		return URI_FALSE; /* Raises malloc error */
+	}
+	if (URI_FUNC(ParseIpFourAddress)(state->uri->hostData.ip4->data,
+			state->uri->hostText.first, state->uri->hostText.afterLast)) {
+		/* Not IPv4 */
+		free(state->uri->hostData.ip4);
+		state->uri->hostData.ip4 = NULL;
+	}
+	return URI_TRUE; /* Success */
+}
+
+
+
+/*
+ * [ownPortUserInfo]->[ALPHA][ownUserInfo]
+ * [ownPortUserInfo]->[DIGIT][ownPortUserInfo]
+ * [ownPortUserInfo]-><.>[ownUserInfo]
+ * [ownPortUserInfo]-><_>[ownUserInfo]
+ * [ownPortUserInfo]-><~>[ownUserInfo]
+ * [ownPortUserInfo]-><->[ownUserInfo]
+ * [ownPortUserInfo]-><@>[ownHost]
+ * [ownPortUserInfo]-><NULL>
+ */
+static const URI_CHAR * URI_FUNC(ParseOwnPortUserInfo)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast) {
+	if (first >= afterLast) {
+		if (!URI_FUNC(OnExitOwnPortUserInfo)(state, first)) {
+			URI_FUNC(StopMalloc)(state);
+			return NULL;
+		}
+		return afterLast;
+	}
+
+	switch (*first) {
+	case _UT('.'):
+	case _UT('_'):
+	case _UT('~'):
+	case _UT('-'):
+	case URI_SET_ALPHA:
+		state->uri->hostText.afterLast = NULL; /* Not a host, reset */
+		state->uri->portText.first = NULL; /* Not a port, reset */
+		return URI_FUNC(ParseOwnUserInfo)(state, first + 1, afterLast);
+
+	case URI_SET_DIGIT:
+		return URI_FUNC(ParseOwnPortUserInfo)(state, first + 1, afterLast);
+
+	case _UT('@'):
+		state->uri->hostText.afterLast = NULL; /* Not a host, reset */
+		state->uri->portText.first = NULL; /* Not a port, reset */
+		state->uri->userInfo.afterLast = first; /* USERINFO END */
+		state->uri->hostText.first = first + 1; /* HOST BEGIN */
+		return URI_FUNC(ParseOwnHost)(state, first + 1, afterLast);
+
+	default:
+		if (!URI_FUNC(OnExitOwnPortUserInfo)(state, first)) {
+			URI_FUNC(StopMalloc)(state);
+			return NULL;
+		}
+		return first;
+	}
+}
+
+
+
+/*
+ * [ownUserInfo]->[pctSubUnres][ownUserInfo]
+ * [ownUserInfo]-><:>[ownUserInfo]
+ * [ownUserInfo]-><@>[ownHost]
+ */
+static const URI_CHAR * URI_FUNC(ParseOwnUserInfo)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast) {
+	if (first >= afterLast) {
+		URI_FUNC(StopSyntax)(state, first);
+		return NULL;
+	}
+
+	switch (*first) {
+	case _UT('!'):
+	case _UT('$'):
+	case _UT('%'):
+	case _UT('&'):
+	case _UT('('):
+	case _UT(')'):
+	case _UT('-'):
+	case _UT('*'):
+	case _UT(','):
+	case _UT('.'):
+	case _UT(';'):
+	case _UT('\''):
+	case _UT('_'):
+	case _UT('~'):
+	case _UT('+'):
+	case _UT('='):
+	case URI_SET_DIGIT:
+	case URI_SET_ALPHA:
+		{
+			const URI_CHAR * const afterPctSubUnres
+					= URI_FUNC(ParsePctSubUnres)(state, first, afterLast);
+			if (afterPctSubUnres == NULL) {
+				return NULL;
+			}
+			return URI_FUNC(ParseOwnUserInfo)(state, afterPctSubUnres, afterLast);
+		}
+
+	case _UT(':'):
+		return URI_FUNC(ParseOwnUserInfo)(state, first + 1, afterLast);
+
+	case _UT('@'):
+		/* SURE */
+		state->uri->userInfo.afterLast = first; /* USERINFO END */
+		state->uri->hostText.first = first + 1; /* HOST BEGIN */
+		return URI_FUNC(ParseOwnHost)(state, first + 1, afterLast);
+
+	default:
+		URI_FUNC(StopSyntax)(state, first);
+		return NULL;
+	}
+}
+
+
+
+static URI_INLINE void URI_FUNC(OnExitPartHelperTwo)(URI_TYPE(ParserState) * state) {
+	state->uri->absolutePath = URI_TRUE;
+}
+
+
+
+/*
+ * [partHelperTwo]->[pathAbsNoLeadSlash] // can take <NULL>
+ * [partHelperTwo]-></>[authority][pathAbsEmpty]
+ */
+static URI_INLINE const URI_CHAR * URI_FUNC(ParsePartHelperTwo)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast) {
+	if (first >= afterLast) {
+		URI_FUNC(OnExitPartHelperTwo)(state);
+		return afterLast;
+	}
+
+	switch (*first) {
+	case _UT('/'):
+		{
+			const URI_CHAR * const afterAuthority
+					= URI_FUNC(ParseAuthority)(state, first + 1, afterLast);
+			const URI_CHAR * afterPathAbsEmpty;
+			if (afterAuthority == NULL) {
+				return NULL;
+			}
+			afterPathAbsEmpty = URI_FUNC(ParsePathAbsEmpty)(state, afterAuthority, afterLast);
+
+			URI_FUNC(FixEmptyTrailSegment)(state->uri);
+
+			return afterPathAbsEmpty;
+		}
+
+	default:
+		URI_FUNC(OnExitPartHelperTwo)(state);
+		return URI_FUNC(ParsePathAbsNoLeadSlash)(state, first, afterLast);
+	}
+}
+
+
+
+/*
+ * [pathAbsEmpty]-></>[segment][pathAbsEmpty]
+ * [pathAbsEmpty]-><NULL>
+ */
+static const URI_CHAR * URI_FUNC(ParsePathAbsEmpty)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast) {
+	if (first >= afterLast) {
+		return afterLast;
+	}
+
+	switch (*first) {
+	case _UT('/'):
+		{
+			const URI_CHAR * const afterSegment
+					= URI_FUNC(ParseSegment)(state, first + 1, afterLast);
+			if (afterSegment == NULL) {
+				return NULL;
+			}
+			if (!URI_FUNC(PushPathSegment)(state, first + 1, afterSegment)) { /* SEGMENT BOTH */
+				URI_FUNC(StopMalloc)(state);
+				return NULL;
+			}
+			return URI_FUNC(ParsePathAbsEmpty)(state, afterSegment, afterLast);
+		}
+
+	default:
+		return first;
+	}
+}
+
+
+
+/*
+ * [pathAbsNoLeadSlash]->[segmentNz][zeroMoreSlashSegs]
+ * [pathAbsNoLeadSlash]-><NULL>
+ */
+static URI_INLINE const URI_CHAR * URI_FUNC(ParsePathAbsNoLeadSlash)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast) {
+	if (first >= afterLast) {
+		return afterLast;
+	}
+
+	switch (*first) {
+	case _UT('!'):
+	case _UT('$'):
+	case _UT('%'):
+	case _UT('&'):
+	case _UT('('):
+	case _UT(')'):
+	case _UT('-'):
+	case _UT('*'):
+	case _UT(','):
+	case _UT('.'):
+	case _UT(':'):
+	case _UT(';'):
+	case _UT('@'):
+	case _UT('\''):
+	case _UT('_'):
+	case _UT('~'):
+	case _UT('+'):
+	case _UT('='):
+	case URI_SET_DIGIT:
+	case URI_SET_ALPHA:
+		{
+			const URI_CHAR * const afterSegmentNz
+					= URI_FUNC(ParseSegmentNz)(state, first, afterLast);
+			if (afterSegmentNz == NULL) {
+				return NULL;
+			}
+			if (!URI_FUNC(PushPathSegment)(state, first, afterSegmentNz)) { /* SEGMENT BOTH */
+				URI_FUNC(StopMalloc)(state);
+				return NULL;
+			}
+			return URI_FUNC(ParseZeroMoreSlashSegs)(state, afterSegmentNz, afterLast);
+		}
+
+	default:
+		return first;
+	}
+}
+
+
+
+/*
+ * [pathRootless]->[segmentNz][zeroMoreSlashSegs]
+ */
+static URI_INLINE const URI_CHAR * URI_FUNC(ParsePathRootless)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast) {
+	const URI_CHAR * const afterSegmentNz
+			= URI_FUNC(ParseSegmentNz)(state, first, afterLast);
+	if (afterSegmentNz == NULL) {
+		return NULL;
+	} else {
+		if (!URI_FUNC(PushPathSegment)(state, first, afterSegmentNz)) { /* SEGMENT BOTH */
+			URI_FUNC(StopMalloc)(state);
+			return NULL;
+		}
+	}
+	return URI_FUNC(ParseZeroMoreSlashSegs)(state, afterSegmentNz, afterLast);
+}
+
+
+
+/*
+ * [pchar]->[pctEncoded]
+ * [pchar]->[subDelims]
+ * [pchar]->[unreserved]
+ * [pchar]-><:>
+ * [pchar]-><@>
+ */
+static const URI_CHAR * URI_FUNC(ParsePchar)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast) {
+	if (first >= afterLast) {
+		URI_FUNC(StopSyntax)(state, first);
+		return NULL;
+	}
+
+	switch (*first) {
+	case _UT('%'):
+		return URI_FUNC(ParsePctEncoded)(state, first, afterLast);
+
+	case _UT(':'):
+	case _UT('@'):
+	case _UT('!'):
+	case _UT('$'):
+	case _UT('&'):
+	case _UT('('):
+	case _UT(')'):
+	case _UT('*'):
+	case _UT(','):
+	case _UT(';'):
+	case _UT('\''):
+	case _UT('+'):
+	case _UT('='):
+	case _UT('-'):
+	case _UT('.'):
+	case _UT('_'):
+	case _UT('~'):
+	case URI_SET_DIGIT:
+	case URI_SET_ALPHA:
+		return first + 1;
+
+	default:
+		URI_FUNC(StopSyntax)(state, first);
+		return NULL;
+	}
+}
+
+
+
+/*
+ * [pctEncoded]-><%>[HEXDIG][HEXDIG]
+ */
+static const URI_CHAR * URI_FUNC(ParsePctEncoded)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast) {
+	if (first >= afterLast) {
+		URI_FUNC(StopSyntax)(state, first);
+		return NULL;
+	}
+
+	/*
+	First character has already been
+	checked before entering this rule.
+
+	switch (*first) {
+	case _UT('%'):
+	*/
+		if (first + 1 >= afterLast) {
+			URI_FUNC(StopSyntax)(state, first + 1);
+			return NULL;
+		}
+
+		switch (first[1]) {
+		case URI_SET_HEXDIG:
+			if (first + 2 >= afterLast) {
+				URI_FUNC(StopSyntax)(state, first + 2);
+				return NULL;
+			}
+
+			switch (first[2]) {
+			case URI_SET_HEXDIG:
+				return first + 3;
+
+			default:
+				URI_FUNC(StopSyntax)(state, first + 2);
+				return NULL;
+			}
+
+		default:
+			URI_FUNC(StopSyntax)(state, first + 1);
+			return NULL;
+		}
+
+	/*
+	default:
+		URI_FUNC(StopSyntax)(state, first);
+		return NULL;
+	}
+	*/
+}
+
+
+
+/*
+ * [pctSubUnres]->[pctEncoded]
+ * [pctSubUnres]->[subDelims]
+ * [pctSubUnres]->[unreserved]
+ */
+static const URI_CHAR * URI_FUNC(ParsePctSubUnres)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast) {
+	if (first >= afterLast) {
+		URI_FUNC(StopSyntax)(state, first);
+		return NULL;
+	}
+
+	switch (*first) {
+	case _UT('%'):
+		return URI_FUNC(ParsePctEncoded)(state, first, afterLast);
+
+	case _UT('!'):
+	case _UT('$'):
+	case _UT('&'):
+	case _UT('('):
+	case _UT(')'):
+	case _UT('*'):
+	case _UT(','):
+	case _UT(';'):
+	case _UT('\''):
+	case _UT('+'):
+	case _UT('='):
+	case _UT('-'):
+	case _UT('.'):
+	case _UT('_'):
+	case _UT('~'):
+	case URI_SET_DIGIT:
+	case URI_SET_ALPHA:
+		return first + 1;
+
+	default:
+		URI_FUNC(StopSyntax)(state, first);
+		return NULL;
+	}
+}
+
+
+
+/*
+ * [port]->[DIGIT][port]
+ * [port]-><NULL>
+ */
+static const URI_CHAR * URI_FUNC(ParsePort)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast) {
+	if (first >= afterLast) {
+		return afterLast;
+	}
+
+	switch (*first) {
+	case URI_SET_DIGIT:
+		return URI_FUNC(ParsePort)(state, first + 1, afterLast);
+
+	default:
+		return first;
+	}
+}
+
+
+
+/*
+ * [queryFrag]->[pchar][queryFrag]
+ * [queryFrag]-></>[queryFrag]
+ * [queryFrag]-><?>[queryFrag]
+ * [queryFrag]-><NULL>
+ */
+static const URI_CHAR * URI_FUNC(ParseQueryFrag)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast) {
+	if (first >= afterLast) {
+		return afterLast;
+	}
+
+	switch (*first) {
+	case _UT('!'):
+	case _UT('$'):
+	case _UT('%'):
+	case _UT('&'):
+	case _UT('('):
+	case _UT(')'):
+	case _UT('-'):
+	case _UT('*'):
+	case _UT(','):
+	case _UT('.'):
+	case _UT(':'):
+	case _UT(';'):
+	case _UT('@'):
+	case _UT('\''):
+	case _UT('_'):
+	case _UT('~'):
+	case _UT('+'):
+	case _UT('='):
+	case URI_SET_DIGIT:
+	case URI_SET_ALPHA:
+		{
+			const URI_CHAR * const afterPchar
+					= URI_FUNC(ParsePchar)(state, first, afterLast);
+			if (afterPchar == NULL) {
+				return NULL;
+			}
+			return URI_FUNC(ParseQueryFrag)(state, afterPchar, afterLast);
+		}
+
+	case _UT('/'):
+	case _UT('?'):
+		return URI_FUNC(ParseQueryFrag)(state, first + 1, afterLast);
+
+	default:
+		return first;
+	}
+}
+
+
+
+/*
+ * [segment]->[pchar][segment]
+ * [segment]-><NULL>
+ */
+static const URI_CHAR * URI_FUNC(ParseSegment)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast) {
+	if (first >= afterLast) {
+		return afterLast;
+	}
+
+	switch (*first) {
+	case _UT('!'):
+	case _UT('$'):
+	case _UT('%'):
+	case _UT('&'):
+	case _UT('('):
+	case _UT(')'):
+	case _UT('-'):
+	case _UT('*'):
+	case _UT(','):
+	case _UT('.'):
+	case _UT(':'):
+	case _UT(';'):
+	case _UT('@'):
+	case _UT('\''):
+	case _UT('_'):
+	case _UT('~'):
+	case _UT('+'):
+	case _UT('='):
+	case URI_SET_DIGIT:
+	case URI_SET_ALPHA:
+		{
+			const URI_CHAR * const afterPchar
+					= URI_FUNC(ParsePchar)(state, first, afterLast);
+			if (afterPchar == NULL) {
+				return NULL;
+			}
+			return URI_FUNC(ParseSegment)(state, afterPchar, afterLast);
+		}
+
+	default:
+		return first;
+	}
+}
+
+
+
+/*
+ * [segmentNz]->[pchar][segment]
+ */
+static URI_INLINE const URI_CHAR * URI_FUNC(ParseSegmentNz)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast) {
+	const URI_CHAR * const afterPchar
+			= URI_FUNC(ParsePchar)(state, first, afterLast);
+	if (afterPchar == NULL) {
+		return NULL;
+	}
+	return URI_FUNC(ParseSegment)(state, afterPchar, afterLast);
+}
+
+
+
+static URI_INLINE UriBool URI_FUNC(OnExitSegmentNzNcOrScheme2)(URI_TYPE(ParserState) * state, const URI_CHAR * first) {
+	if (!URI_FUNC(PushPathSegment)(state, state->uri->scheme.first, first)) { /* SEGMENT BOTH */
+		return URI_FALSE; /* Raises malloc error*/
+	}
+	state->uri->scheme.first = NULL; /* Not a scheme, reset */
+	return URI_TRUE; /* Success */
+}
+
+
+
+/*
+ * [segmentNzNcOrScheme2]->[ALPHA][segmentNzNcOrScheme2]
+ * [segmentNzNcOrScheme2]->[DIGIT][segmentNzNcOrScheme2]
+ * [segmentNzNcOrScheme2]->[pctEncoded][mustBeSegmentNzNc]
+ * [segmentNzNcOrScheme2]->[uriTail] // can take <NULL>
+ * [segmentNzNcOrScheme2]-><!>[mustBeSegmentNzNc]
+ * [segmentNzNcOrScheme2]-><$>[mustBeSegmentNzNc]
+ * [segmentNzNcOrScheme2]-><&>[mustBeSegmentNzNc]
+ * [segmentNzNcOrScheme2]-><(>[mustBeSegmentNzNc]
+ * [segmentNzNcOrScheme2]-><)>[mustBeSegmentNzNc]
+ * [segmentNzNcOrScheme2]-><*>[mustBeSegmentNzNc]
+ * [segmentNzNcOrScheme2]-><,>[mustBeSegmentNzNc]
+ * [segmentNzNcOrScheme2]-><.>[segmentNzNcOrScheme2]
+ * [segmentNzNcOrScheme2]-></>[segment][zeroMoreSlashSegs][uriTail]
+ * [segmentNzNcOrScheme2]-><:>[hierPart][uriTail]
+ * [segmentNzNcOrScheme2]-><;>[mustBeSegmentNzNc]
+ * [segmentNzNcOrScheme2]-><@>[mustBeSegmentNzNc]
+ * [segmentNzNcOrScheme2]-><_>[mustBeSegmentNzNc]
+ * [segmentNzNcOrScheme2]-><~>[mustBeSegmentNzNc]
+ * [segmentNzNcOrScheme2]-><+>[segmentNzNcOrScheme2]
+ * [segmentNzNcOrScheme2]-><=>[mustBeSegmentNzNc]
+ * [segmentNzNcOrScheme2]-><'>[mustBeSegmentNzNc]
+ * [segmentNzNcOrScheme2]-><->[segmentNzNcOrScheme2]
+ */
+static const URI_CHAR * URI_FUNC(ParseSegmentNzNcOrScheme2)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast) {
+	if (first >= afterLast) {
+		if (!URI_FUNC(OnExitSegmentNzNcOrScheme2)(state, first)) {
+			URI_FUNC(StopMalloc)(state);
+			return NULL;
+		}
+		return afterLast;
+	}
+
+	switch (*first) {
+	case _UT('.'):
+	case _UT('+'):
+	case _UT('-'):
+	case URI_SET_ALPHA:
+	case URI_SET_DIGIT:
+		return URI_FUNC(ParseSegmentNzNcOrScheme2)(state, first + 1, afterLast);
+
+	case _UT('%'):
+		{
+			const URI_CHAR * const afterPctEncoded
+					= URI_FUNC(ParsePctEncoded)(state, first, afterLast);
+			if (afterPctEncoded == NULL) {
+				return NULL;
+			}
+			return URI_FUNC(ParseMustBeSegmentNzNc)(state, afterPctEncoded, afterLast);
+		}
+
+	case _UT('!'):
+	case _UT('$'):
+	case _UT('&'):
+	case _UT('('):
+	case _UT(')'):
+	case _UT('*'):
+	case _UT(','):
+	case _UT(';'):
+	case _UT('@'):
+	case _UT('_'):
+	case _UT('~'):
+	case _UT('='):
+	case _UT('\''):
+		return URI_FUNC(ParseMustBeSegmentNzNc)(state, first + 1, afterLast);
+
+	case _UT('/'):
+		{
+			const URI_CHAR * afterZeroMoreSlashSegs;
+			const URI_CHAR * const afterSegment
+					= URI_FUNC(ParseSegment)(state, first + 1, afterLast);
+			if (afterSegment == NULL) {
+				return NULL;
+			}
+			if (!URI_FUNC(PushPathSegment)(state, state->uri->scheme.first, first)) { /* SEGMENT BOTH */
+				URI_FUNC(StopMalloc)(state);
+				return NULL;
+			}
+			state->uri->scheme.first = NULL; /* Not a scheme, reset */
+			if (!URI_FUNC(PushPathSegment)(state, first + 1, afterSegment)) { /* SEGMENT BOTH */
+				URI_FUNC(StopMalloc)(state);
+				return NULL;
+			}
+			afterZeroMoreSlashSegs
+					= URI_FUNC(ParseZeroMoreSlashSegs)(state, afterSegment, afterLast);
+			if (afterZeroMoreSlashSegs == NULL) {
+				return NULL;
+			}
+			return URI_FUNC(ParseUriTail)(state, afterZeroMoreSlashSegs, afterLast);
+		}
+
+	case _UT(':'):
+		{
+			const URI_CHAR * const afterHierPart
+					= URI_FUNC(ParseHierPart)(state, first + 1, afterLast);
+			state->uri->scheme.afterLast = first; /* SCHEME END */
+			if (afterHierPart == NULL) {
+				return NULL;
+			}
+			return URI_FUNC(ParseUriTail)(state, afterHierPart, afterLast);
+		}
+
+	default:
+		if (!URI_FUNC(OnExitSegmentNzNcOrScheme2)(state, first)) {
+			URI_FUNC(StopMalloc)(state);
+			return NULL;
+		}
+		return URI_FUNC(ParseUriTail)(state, first, afterLast);
+	}
+}
+
+
+
+/*
+ * [uriReference]->[ALPHA][segmentNzNcOrScheme2]
+ * [uriReference]->[DIGIT][mustBeSegmentNzNc]
+ * [uriReference]->[pctEncoded][mustBeSegmentNzNc]
+ * [uriReference]->[subDelims][mustBeSegmentNzNc]
+ * [uriReference]->[uriTail] // can take <NULL>
+ * [uriReference]-><.>[mustBeSegmentNzNc]
+ * [uriReference]-></>[partHelperTwo][uriTail]
+ * [uriReference]-><@>[mustBeSegmentNzNc]
+ * [uriReference]-><_>[mustBeSegmentNzNc]
+ * [uriReference]-><~>[mustBeSegmentNzNc]
+ * [uriReference]-><->[mustBeSegmentNzNc]
+ */
+static const URI_CHAR * URI_FUNC(ParseUriReference)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast) {
+	if (first >= afterLast) {
+		return afterLast;
+	}
+
+	switch (*first) {
+	case URI_SET_ALPHA:
+		state->uri->scheme.first = first; /* SCHEME BEGIN */
+		return URI_FUNC(ParseSegmentNzNcOrScheme2)(state, first + 1, afterLast);
+
+	case URI_SET_DIGIT:
+	case _UT('!'):
+	case _UT('$'):
+	case _UT('&'):
+	case _UT('('):
+	case _UT(')'):
+	case _UT('*'):
+	case _UT(','):
+	case _UT(';'):
+	case _UT('\''):
+	case _UT('+'):
+	case _UT('='):
+	case _UT('.'):
+	case _UT('_'):
+	case _UT('~'):
+	case _UT('-'):
+	case _UT('@'):
+		state->uri->scheme.first = first; /* SEGMENT BEGIN, ABUSE SCHEME POINTER */
+		return URI_FUNC(ParseMustBeSegmentNzNc)(state, first + 1, afterLast);
+
+	case _UT('%'):
+		{
+			const URI_CHAR * const afterPctEncoded
+					= URI_FUNC(ParsePctEncoded)(state, first, afterLast);
+			if (afterPctEncoded == NULL) {
+				return NULL;
+			}
+			state->uri->scheme.first = first; /* SEGMENT BEGIN, ABUSE SCHEME POINTER */
+			return URI_FUNC(ParseMustBeSegmentNzNc)(state, afterPctEncoded, afterLast);
+		}
+
+	case _UT('/'):
+		{
+			const URI_CHAR * const afterPartHelperTwo
+					= URI_FUNC(ParsePartHelperTwo)(state, first + 1, afterLast);
+			if (afterPartHelperTwo == NULL) {
+				return NULL;
+			}
+			return URI_FUNC(ParseUriTail)(state, afterPartHelperTwo, afterLast);
+		}
+
+	default:
+		return URI_FUNC(ParseUriTail)(state, first, afterLast);
+	}
+}
+
+
+
+/*
+ * [uriTail]-><#>[queryFrag]
+ * [uriTail]-><?>[queryFrag][uriTailTwo]
+ * [uriTail]-><NULL>
+ */
+static URI_INLINE const URI_CHAR * URI_FUNC(ParseUriTail)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast) {
+	if (first >= afterLast) {
+		return afterLast;
+	}
+
+	switch (*first) {
+	case _UT('#'):
+		{
+			const URI_CHAR * const afterQueryFrag = URI_FUNC(ParseQueryFrag)(state, first + 1, afterLast);
+			if (afterQueryFrag == NULL) {
+				return NULL;
+			}
+			state->uri->fragment.first = first + 1; /* FRAGMENT BEGIN */
+			state->uri->fragment.afterLast = afterQueryFrag; /* FRAGMENT END */
+			return afterQueryFrag;
+		}
+
+	case _UT('?'):
+		{
+			const URI_CHAR * const afterQueryFrag
+					= URI_FUNC(ParseQueryFrag)(state, first + 1, afterLast);
+			if (afterQueryFrag == NULL) {
+				return NULL;
+			}
+			state->uri->query.first = first + 1; /* QUERY BEGIN */
+			state->uri->query.afterLast = afterQueryFrag; /* QUERY END */
+			return URI_FUNC(ParseUriTailTwo)(state, afterQueryFrag, afterLast);
+		}
+
+	default:
+		return first;
+	}
+}
+
+
+
+/*
+ * [uriTailTwo]-><#>[queryFrag]
+ * [uriTailTwo]-><NULL>
+ */
+static URI_INLINE const URI_CHAR * URI_FUNC(ParseUriTailTwo)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast) {
+	if (first >= afterLast) {
+		return afterLast;
+	}
+
+	switch (*first) {
+	case _UT('#'):
+		{
+			const URI_CHAR * const afterQueryFrag = URI_FUNC(ParseQueryFrag)(state, first + 1, afterLast);
+			if (afterQueryFrag == NULL) {
+				return NULL;
+			}
+			state->uri->fragment.first = first + 1; /* FRAGMENT BEGIN */
+			state->uri->fragment.afterLast = afterQueryFrag; /* FRAGMENT END */
+			return afterQueryFrag;
+		}
+
+	default:
+		return first;
+	}
+}
+
+
+
+/*
+ * [zeroMoreSlashSegs]-></>[segment][zeroMoreSlashSegs]
+ * [zeroMoreSlashSegs]-><NULL>
+ */
+static const URI_CHAR * URI_FUNC(ParseZeroMoreSlashSegs)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast) {
+	if (first >= afterLast) {
+		return afterLast;
+	}
+
+	switch (*first) {
+	case _UT('/'):
+		{
+			const URI_CHAR * const afterSegment
+					= URI_FUNC(ParseSegment)(state, first + 1, afterLast);
+			if (afterSegment == NULL) {
+				return NULL;
+			}
+			if (!URI_FUNC(PushPathSegment)(state, first + 1, afterSegment)) { /* SEGMENT BOTH */
+				URI_FUNC(StopMalloc)(state);
+				return NULL;
+			}
+			return URI_FUNC(ParseZeroMoreSlashSegs)(state, afterSegment, afterLast);
+		}
+
+	default:
+		return first;
+	}
+}
+
+
+
+static URI_INLINE void URI_FUNC(ResetParserState)(URI_TYPE(ParserState) * state) {
+	URI_TYPE(Uri) * const uriBackup = state->uri;
+	memset(state, 0, sizeof(URI_TYPE(ParserState)));
+	state->uri = uriBackup;
+}
+
+
+
+static URI_INLINE UriBool URI_FUNC(PushPathSegment)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast) {
+	URI_TYPE(PathSegment) * segment = malloc(1 * sizeof(URI_TYPE(PathSegment)));
+	if (segment == NULL) {
+		return URI_FALSE; /* Raises malloc error */
+	}
+	memset(segment, 0, sizeof(URI_TYPE(PathSegment)));
+	if (first == afterLast) {
+		segment->text.first = URI_FUNC(SafeToPointTo);
+		segment->text.afterLast = URI_FUNC(SafeToPointTo);
+	} else {
+		segment->text.first = first;
+		segment->text.afterLast = afterLast;
+	}
+
+	/* First segment ever? */
+	if (state->uri->pathHead == NULL) {
+		/* First segement ever, set head and tail */
+		state->uri->pathHead = segment;
+		state->uri->pathTail = segment;
+	} else {
+		/* Append, update tail */
+		state->uri->pathTail->next = segment;
+		state->uri->pathTail = segment;
+	}
+
+	return URI_TRUE; /* Success */
+}
+
+
+
+int URI_FUNC(ParseUriEx)(URI_TYPE(ParserState) * state, const URI_CHAR * first, const URI_CHAR * afterLast) {
+	const URI_CHAR * afterUriReference;
+	URI_TYPE(Uri) * uri;
+
+	/* Check params */
+	if ((state == NULL) || (first == NULL) || (afterLast == NULL)) {
+		return URI_ERROR_NULL;
+	}
+	uri = state->uri;
+
+	/* Init parser */
+	URI_FUNC(ResetParserState)(state);
+	URI_FUNC(ResetUri)(uri);
+
+	/* Parse */
+	afterUriReference = URI_FUNC(ParseUriReference)(state, first, afterLast);
+	if (afterUriReference == NULL) {
+		return state->errorCode;
+	}
+	if (afterUriReference != afterLast) {
+		return URI_ERROR_SYNTAX;
+	}
+	return URI_SUCCESS;
+}
+
+
+
+int URI_FUNC(ParseUri)(URI_TYPE(ParserState) * state, const URI_CHAR * text) {
+	if ((state == NULL) || (text == NULL)) {
+		return URI_ERROR_NULL;
+	}
+	return URI_FUNC(ParseUriEx)(state, text, text + URI_STRLEN(text));
+}
+
+
+
+void URI_FUNC(FreeUriMembers)(URI_TYPE(Uri) * uri) {
+	if (uri == NULL) {
+		return;
+	}
+
+	if (uri->owner) {
+		/* Scheme */
+		if (uri->scheme.first != NULL) {
+			if (uri->scheme.first != uri->scheme.afterLast) {
+				free((URI_CHAR *)uri->scheme.first);
+			}
+			uri->scheme.first = NULL;
+			uri->scheme.afterLast = NULL;
+		}
+
+		/* User info */
+		if (uri->userInfo.first != NULL) {
+			if (uri->userInfo.first != uri->userInfo.afterLast) {
+				free((URI_CHAR *)uri->userInfo.first);
+			}
+			uri->userInfo.first = NULL;
+			uri->userInfo.afterLast = NULL;
+		}
+
+		/* Host data - IPvFuture */
+		if (uri->hostData.ipFuture.first != NULL) {
+			if (uri->hostData.ipFuture.first != uri->hostData.ipFuture.afterLast) {
+				free((URI_CHAR *)uri->hostData.ipFuture.first);
+			}
+			uri->hostData.ipFuture.first = NULL;
+			uri->hostData.ipFuture.afterLast = NULL;
+			uri->hostText.first = NULL;
+			uri->hostText.afterLast = NULL;
+		}
+
+		/* Host text (if regname, after IPvFuture!) */
+		if ((uri->hostText.first != NULL)
+				&& (uri->hostData.ip4 == NULL)
+				&& (uri->hostData.ip6 == NULL)) {
+			/* Real regname */
+			if (uri->hostText.first != uri->hostText.afterLast) {
+				free((URI_CHAR *)uri->hostText.first);
+			}
+			uri->hostText.first = NULL;
+			uri->hostText.afterLast = NULL;
+		}
+	}
+
+	/* Host data - IPv4 */
+	if (uri->hostData.ip4 != NULL) {
+		free(uri->hostData.ip4);
+		uri->hostData.ip4 = NULL;
+	}
+
+	/* Host data - IPv6 */
+	if (uri->hostData.ip6 != NULL) {
+		free(uri->hostData.ip6);
+		uri->hostData.ip6 = NULL;
+	}
+
+	/* Port text */
+	if (uri->owner && (uri->portText.first != NULL)) {
+		if (uri->portText.first != uri->portText.afterLast) {
+			free((URI_CHAR *)uri->portText.first);
+		}
+		uri->portText.first = NULL;
+		uri->portText.afterLast = NULL;
+	}
+
+	/* Path */
+	if (uri->pathHead != NULL) {
+		URI_TYPE(PathSegment) * segWalk = uri->pathHead;
+		while (segWalk != NULL) {
+			URI_TYPE(PathSegment) * const next = segWalk->next;
+			if (uri->owner && (segWalk->text.first != NULL)
+					&& (segWalk->text.first < segWalk->text.afterLast)) {
+				free((URI_CHAR *)segWalk->text.first);
+			}
+			free(segWalk);
+			segWalk = next;
+		}
+		uri->pathHead = NULL;
+		uri->pathTail = NULL;
+	}
+
+	if (uri->owner) {
+		/* Query */
+		if (uri->query.first != NULL) {
+			if (uri->query.first != uri->query.afterLast) {
+				free((URI_CHAR *)uri->query.first);
+			}
+			uri->query.first = NULL;
+			uri->query.afterLast = NULL;
+		}
+
+		/* Fragment */
+		if (uri->fragment.first != NULL) {
+			if (uri->fragment.first != uri->fragment.afterLast) {
+				free((URI_CHAR *)uri->fragment.first);
+			}
+			uri->fragment.first = NULL;
+			uri->fragment.afterLast = NULL;
+		}
+	}
+}
+
+
+
+UriBool URI_FUNC(_TESTING_ONLY_ParseIpSix)(const URI_CHAR * text) {
+	URI_TYPE(Uri) uri;
+	URI_TYPE(ParserState) parser;
+	const URI_CHAR * const afterIpSix = text + URI_STRLEN(text);
+	const URI_CHAR * res;
+
+	URI_FUNC(ResetParserState)(&parser);
+	URI_FUNC(ResetUri)(&uri);
+	parser.uri = &uri;
+	parser.uri->hostData.ip6 = malloc(1 * sizeof(UriIp6));
+	res = URI_FUNC(ParseIPv6address2)(&parser, text, afterIpSix);
+	URI_FUNC(FreeUriMembers)(&uri);
+	return res == afterIpSix ? URI_TRUE : URI_FALSE;
+}
+
+
+
+UriBool URI_FUNC(_TESTING_ONLY_ParseIpFour)(const URI_CHAR * text) {
+	unsigned char octets[4];
+	int res = URI_FUNC(ParseIpFourAddress)(octets, text, text + URI_STRLEN(text));
+	return (res == URI_SUCCESS) ? URI_TRUE : URI_FALSE;
+}
+
+
+
+#undef URI_SET_DIGIT
+#undef URI_SET_HEX_LETTER_UPPER
+#undef URI_SET_HEX_LETTER_LOWER
+#undef URI_SET_HEXDIG
+#undef URI_SET_ALPHA
+
+
+
+#endif
diff -Nru /tmp/bxdedfLB6u/uriparser-0.6.0/lib/UriQuery.c /tmp/fLjZ2dz9P3/uriparser-0.7.4/lib/UriQuery.c
--- uriparser-0.6.0/lib/UriQuery.c	1970-01-01 01:00:00.000000000 +0100
+++ uriparser-0.7.4/lib/UriQuery.c	2008-12-20 18:52:47.000000000 +0000
@@ -0,0 +1,456 @@
+/*
+ * uriparser - RFC 3986 URI parsing library
+ *
+ * Copyright (C) 2007, Weijia Song <songweijia@gmail.com>
+ * Copyright (C) 2007, Sebastian Pipping <webmaster@hartwork.org>
+ * All rights reserved.
+ *
+ * Redistribution  and use in source and binary forms, with or without
+ * modification,  are permitted provided that the following conditions
+ * are met:
+ *
+ *     * Redistributions   of  source  code  must  retain  the   above
+ *       copyright  notice, this list of conditions and the  following
+ *       disclaimer.
+ *
+ *     * Redistributions  in  binary  form must  reproduce  the  above
+ *       copyright  notice, this list of conditions and the  following
+ *       disclaimer   in  the  documentation  and/or  other  materials
+ *       provided with the distribution.
+ *
+ *     * Neither  the name of the <ORGANIZATION> nor the names of  its
+ *       contributors  may  be  used to endorse  or  promote  products
+ *       derived  from  this software without specific  prior  written
+ *       permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS  IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT  NOT
+ * LIMITED  TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND  FITNESS
+ * FOR  A  PARTICULAR  PURPOSE ARE DISCLAIMED. IN NO EVENT  SHALL  THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL,    SPECIAL,   EXEMPLARY,   OR   CONSEQUENTIAL   DAMAGES
+ * (INCLUDING,  BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES;  LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT  LIABILITY,  OR  TORT (INCLUDING  NEGLIGENCE  OR  OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/* What encodings are enabled? */
+#include <uriparser/UriDefsConfig.h>
+#if (!defined(URI_PASS_ANSI) && !defined(URI_PASS_UNICODE))
+/* Include SELF twice */
+# define URI_PASS_ANSI 1
+# include "UriQuery.c"
+# undef URI_PASS_ANSI
+# define URI_PASS_UNICODE 1
+# include "UriQuery.c"
+# undef URI_PASS_UNICODE
+#else
+# ifdef URI_PASS_ANSI
+#  include <uriparser/UriDefsAnsi.h>
+# else
+#  include <uriparser/UriDefsUnicode.h>
+#  include <wchar.h>
+# endif
+
+
+
+#ifndef URI_DOXYGEN
+# include <uriparser/Uri.h>
+# include "UriCommon.h"
+#endif
+
+
+
+static int URI_FUNC(ComposeQueryEngine)(URI_CHAR * dest,
+		const URI_TYPE(QueryList) * queryList,
+		int maxChars, int * charsWritten, int * charsRequired,
+		UriBool spaceToPlus, UriBool normalizeBreaks);
+
+static UriBool URI_FUNC(AppendQueryItem)(URI_TYPE(QueryList) ** prevNext,
+		int * itemCount, const URI_CHAR * keyFirst, const URI_CHAR * keyAfter,
+		const URI_CHAR * valueFirst, const URI_CHAR * valueAfter,
+		UriBool plusToSpace, UriBreakConversion breakConversion);
+
+
+
+int URI_FUNC(ComposeQueryCharsRequired)(const URI_TYPE(QueryList) * queryList,
+		int * charsRequired) {
+	const UriBool spaceToPlus = URI_TRUE;
+	const UriBool normalizeBreaks = URI_TRUE;
+
+	return URI_FUNC(ComposeQueryCharsRequiredEx)(queryList, charsRequired,
+			spaceToPlus, normalizeBreaks);
+}
+
+
+
+int URI_FUNC(ComposeQueryCharsRequiredEx)(const URI_TYPE(QueryList) * queryList,
+		int * charsRequired, UriBool spaceToPlus, UriBool normalizeBreaks) {
+	if ((queryList == NULL) || (charsRequired == NULL)) {
+		return URI_ERROR_NULL;
+	}
+
+	return URI_FUNC(ComposeQueryEngine)(NULL, queryList, 0, NULL,
+			charsRequired, spaceToPlus, normalizeBreaks);
+}
+
+
+
+int URI_FUNC(ComposeQuery)(URI_CHAR * dest,
+						   const URI_TYPE(QueryList) * queryList, int maxChars, int * charsWritten) {
+	const UriBool spaceToPlus = URI_TRUE;
+	const UriBool normalizeBreaks = URI_TRUE;
+
+	return URI_FUNC(ComposeQueryEx)(dest, queryList, maxChars, charsWritten,
+			spaceToPlus, normalizeBreaks);
+}
+
+
+
+int URI_FUNC(ComposeQueryEx)(URI_CHAR * dest,
+		const URI_TYPE(QueryList) * queryList, int maxChars, int * charsWritten,
+		UriBool spaceToPlus, UriBool normalizeBreaks) {
+	if ((dest == NULL) || (queryList == NULL)) {
+		return URI_ERROR_NULL;
+	}
+
+	if (maxChars < 1) {
+		return URI_ERROR_OUTPUT_TOO_LARGE;
+	}
+
+	return URI_FUNC(ComposeQueryEngine)(dest, queryList, maxChars,
+			charsWritten, NULL, spaceToPlus, normalizeBreaks);
+}
+
+
+
+int URI_FUNC(ComposeQueryMalloc)(URI_CHAR ** dest,
+		const URI_TYPE(QueryList) * queryList) {
+	const UriBool spaceToPlus = URI_TRUE;
+	const UriBool normalizeBreaks = URI_TRUE;
+
+	return URI_FUNC(ComposeQueryMallocEx)(dest, queryList,
+			spaceToPlus, normalizeBreaks);
+}
+
+
+
+int URI_FUNC(ComposeQueryMallocEx)(URI_CHAR ** dest,
+		const URI_TYPE(QueryList) * queryList,
+		UriBool spaceToPlus, UriBool normalizeBreaks) {
+	int charsRequired;
+	int res;
+	URI_CHAR * queryString;
+
+	if (dest == NULL) {
+		return URI_ERROR_NULL;
+	}
+
+	/* Calculate space */
+	res = URI_FUNC(ComposeQueryCharsRequiredEx)(queryList, &charsRequired,
+			spaceToPlus, normalizeBreaks);
+	if (res != URI_SUCCESS) {
+		return res;
+	}
+	charsRequired++;
+
+	/* Allocate space */
+	queryString = malloc(charsRequired * sizeof(URI_CHAR));
+	if (queryString == NULL) {
+		return URI_ERROR_MALLOC;
+	}
+
+	/* Put query in */
+	res = URI_FUNC(ComposeQueryEx)(queryString, queryList, charsRequired,
+			NULL, spaceToPlus, normalizeBreaks);
+	if (res != URI_SUCCESS) {
+		free(queryString);
+		return res;
+	}
+
+	*dest = queryString;
+	return URI_SUCCESS;
+}
+
+
+
+int URI_FUNC(ComposeQueryEngine)(URI_CHAR * dest,
+		const URI_TYPE(QueryList) * queryList,
+		int maxChars, int * charsWritten, int * charsRequired,
+		UriBool spaceToPlus, UriBool normalizeBreaks) {
+	UriBool firstItem = URI_TRUE;
+	int ampersandLen = 0;
+	URI_CHAR * write = dest;
+
+	/* Subtract terminator */
+	if (dest == NULL) {
+		*charsRequired = 0;
+	} else {
+		maxChars--;
+	}
+			
+	while (queryList != NULL) {
+		const URI_CHAR * const key = queryList->key;
+		const URI_CHAR * const value = queryList->value;
+		const int worstCase = (normalizeBreaks == URI_TRUE ? 6 : 3);
+		const int keyLen = (key == NULL) ? 0 : (int)URI_STRLEN(key);
+		const int keyRequiredChars = worstCase * keyLen;
+		const int valueLen = (value == NULL) ? 0 : (int)URI_STRLEN(value);
+		const int valueRequiredChars = worstCase * valueLen;
+
+		if (dest == NULL) {
+			if (firstItem == URI_TRUE) {
+				ampersandLen = 1;
+				firstItem = URI_FALSE;
+			}
+
+			(*charsRequired) += ampersandLen + keyRequiredChars + ((value == NULL)
+						? 0
+						: 1 + valueRequiredChars);
+		} else {
+			URI_CHAR * afterKey;
+
+			if ((write - dest) + ampersandLen + keyRequiredChars > maxChars) {
+				return URI_ERROR_OUTPUT_TOO_LARGE;
+			}
+
+			/* Copy key */
+			if (firstItem == URI_TRUE) {
+				firstItem = URI_FALSE;
+			} else {
+				write[0] = _UT('&');
+				write++;
+			}
+			afterKey = URI_FUNC(EscapeEx)(key, key + keyLen,
+					write, spaceToPlus, normalizeBreaks);
+			write += (afterKey - write);
+
+			if (value != NULL) {
+				URI_CHAR * afterValue;
+
+				if ((write - dest) + 1 + valueRequiredChars > maxChars) {
+					return URI_ERROR_OUTPUT_TOO_LARGE;
+				}
+
+				/* Copy value */
+				write[0] = _UT('=');
+				write++;
+				afterValue = URI_FUNC(EscapeEx)(value, value + valueLen,
+						write, spaceToPlus, normalizeBreaks);
+				write += (afterValue - write);
+			}
+		}
+
+		queryList = queryList->next;
+	}
+
+	if (dest != NULL) {
+		write[0] = _UT('\0');
+		if (charsWritten != NULL) {
+			*charsWritten = (int)(write - dest) + 1; /* .. for terminator */
+		}
+	}
+
+	return URI_SUCCESS;
+}
+
+
+
+UriBool URI_FUNC(AppendQueryItem)(URI_TYPE(QueryList) ** prevNext,
+		int * itemCount, const URI_CHAR * keyFirst, const URI_CHAR * keyAfter,
+		const URI_CHAR * valueFirst, const URI_CHAR * valueAfter,
+		UriBool plusToSpace, UriBreakConversion breakConversion) {
+	const int keyLen = (int)(keyAfter - keyFirst);
+	const int valueLen = (int)(valueAfter - valueFirst);
+	URI_CHAR * key;
+	URI_CHAR * value;
+
+	if ((prevNext == NULL) || (itemCount == NULL)
+			|| (keyFirst == NULL) || (keyAfter == NULL)
+			|| (keyFirst > keyAfter) || (valueFirst > valueAfter)
+			|| ((keyFirst == keyAfter)
+				&& (valueFirst == NULL) && (valueAfter == NULL))) {
+		return URI_TRUE;
+	}
+
+	/* Append new empty item */
+	*prevNext = malloc(1 * sizeof(URI_TYPE(QueryList)));
+	if (*prevNext == NULL) {
+		return URI_FALSE; /* Raises malloc error */
+	}
+	(*prevNext)->next = NULL;
+
+
+	/* Fill key */
+	key = malloc((keyLen + 1) * sizeof(URI_CHAR));
+	if (key == NULL) {
+		free(*prevNext);
+		*prevNext = NULL;
+		return URI_FALSE; /* Raises malloc error */
+	}
+
+	key[keyLen] = _UT('\0');
+	if (keyLen > 0) {
+		/* Copy 1:1 */
+		memcpy(key, keyFirst, keyLen * sizeof(URI_CHAR));
+
+		/* Unescape */
+		URI_FUNC(UnescapeInPlaceEx)(key, plusToSpace, breakConversion);
+	}
+	(*prevNext)->key = key;
+
+
+	/* Fill value */
+	if (valueFirst != NULL) {
+		value = malloc((valueLen + 1) * sizeof(URI_CHAR));
+		if (value == NULL) {
+			free(key);
+			free(*prevNext);
+			*prevNext = NULL;
+			return URI_FALSE; /* Raises malloc error */
+		}
+
+		value[valueLen] = _UT('\0');
+		if (valueLen > 0) {
+			/* Copy 1:1 */
+			memcpy(value, valueFirst, valueLen * sizeof(URI_CHAR));
+
+			/* Unescape */
+			URI_FUNC(UnescapeInPlaceEx)(value, plusToSpace, breakConversion);
+		}
+		(*prevNext)->value = value;
+	} else {
+		value = NULL;
+	}
+	(*prevNext)->value = value;
+
+	(*itemCount)++;
+	return URI_TRUE;
+}
+
+
+
+void URI_FUNC(FreeQueryList)(URI_TYPE(QueryList) * queryList) {
+	while (queryList != NULL) {
+		URI_TYPE(QueryList) * nextBackup = queryList->next;
+		free(queryList->key);
+		free(queryList->value);
+		free(queryList);
+		queryList = nextBackup;
+	}
+}
+
+
+
+int URI_FUNC(DissectQueryMalloc)(URI_TYPE(QueryList) ** dest, int * itemCount,
+		const URI_CHAR * first, const URI_CHAR * afterLast) {
+	const UriBool plusToSpace = URI_TRUE;
+	const UriBreakConversion breakConversion = URI_BR_DONT_TOUCH;
+
+	return URI_FUNC(DissectQueryMallocEx)(dest, itemCount, first, afterLast,
+			plusToSpace, breakConversion);
+}
+
+
+
+int URI_FUNC(DissectQueryMallocEx)(URI_TYPE(QueryList) ** dest, int * itemCount,
+		const URI_CHAR * first, const URI_CHAR * afterLast,
+		UriBool plusToSpace, UriBreakConversion breakConversion) {
+	const URI_CHAR * walk = first;
+	const URI_CHAR * keyFirst = first;
+	const URI_CHAR * keyAfter = NULL;
+	const URI_CHAR * valueFirst = NULL;
+	const URI_CHAR * valueAfter = NULL;
+	URI_TYPE(QueryList) ** prevNext = dest;
+	int nullCounter;
+	int * itemsAppended = (itemCount == NULL) ? &nullCounter : itemCount;
+
+	if ((dest == NULL) || (first == NULL) || (afterLast == NULL)) {
+		return URI_ERROR_NULL;
+	}
+
+	if (first > afterLast) {
+		return URI_ERROR_RANGE_INVALID;
+	}
+
+	*dest = NULL;
+	*itemsAppended = 0;
+
+	/* Parse query string */
+	for (; walk < afterLast; walk++) {
+		switch (*walk) {
+		case _UT('&'):
+			if (valueFirst != NULL) {
+				valueAfter = walk;
+			} else {
+				keyAfter = walk;
+			}
+
+			if (URI_FUNC(AppendQueryItem)(prevNext, itemsAppended,
+					keyFirst, keyAfter, valueFirst, valueAfter,
+					plusToSpace, breakConversion)
+					== URI_FALSE) {
+				/* Free list we built */
+				*itemsAppended = 0;
+				URI_FUNC(FreeQueryList)(*dest);
+				return URI_ERROR_MALLOC;
+			}
+
+			/* Make future items children of the current */
+			if ((prevNext != NULL) && (*prevNext != NULL)) {
+				prevNext = &((*prevNext)->next);
+			}
+
+			if (walk + 1 < afterLast) {
+				keyFirst = walk + 1;
+			} else {
+				keyFirst = NULL;
+			}
+			keyAfter = NULL;
+			valueFirst = NULL;
+			valueAfter = NULL;
+			break;
+
+		case _UT('='):
+			/* NOTE: WE treat the first '=' as a separator, */
+			/*       all following go into the value part   */
+			if (keyAfter == NULL) {
+				keyAfter = walk;
+				if (walk + 1 < afterLast) {
+					valueFirst = walk + 1;
+					valueAfter = walk + 1;
+				}
+			}
+			break;
+
+		default:
+			break;
+		}
+	}
+
+	if (valueFirst != NULL) {
+		/* Must be key/value pair */
+		valueAfter = walk;
+	} else {
+		/* Must be key only */
+		keyAfter = walk;
+	}
+
+	if (URI_FUNC(AppendQueryItem)(prevNext, itemsAppended, keyFirst, keyAfter,
+			valueFirst, valueAfter, plusToSpace, breakConversion)
+			== URI_FALSE) {
+		/* Free list we built */
+		*itemsAppended = 0;
+		URI_FUNC(FreeQueryList)(*dest);
+		return URI_ERROR_MALLOC;
+	}
+
+	return URI_SUCCESS;
+}
+
+
+
+#endif
diff -Nru /tmp/bxdedfLB6u/uriparser-0.6.0/lib/UriRecompose.c /tmp/fLjZ2dz9P3/uriparser-0.7.4/lib/UriRecompose.c
--- uriparser-0.6.0/lib/UriRecompose.c	2007-09-12 18:53:22.000000000 +0100
+++ uriparser-0.7.4/lib/UriRecompose.c	2008-12-20 18:52:47.000000000 +0000
@@ -1,576 +1,573 @@
-/*
- * uriparser - RFC 3986 URI parsing library
- *
- * Copyright (C) 2007, Weijia Song <songweijia@gmail.com>
- * Copyright (C) 2007, Sebastian Pipping <webmaster@hartwork.org>
- * All rights reserved.
- *
- * Redistribution  and use in source and binary forms, with or without
- * modification,  are permitted provided that the following conditions
- * are met:
- *
- *     * Redistributions   of  source  code  must  retain  the   above
- *       copyright  notice, this list of conditions and the  following
- *       disclaimer.
- *
- *     * Redistributions  in  binary  form must  reproduce  the  above
- *       copyright  notice, this list of conditions and the  following
- *       disclaimer   in  the  documentation  and/or  other  materials
- *       provided with the distribution.
- *
- *     * Neither  the name of the <ORGANIZATION> nor the names of  its
- *       contributors  may  be  used to endorse  or  promote  products
- *       derived  from  this software without specific  prior  written
- *       permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS  IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT  NOT
- * LIMITED  TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND  FITNESS
- * FOR  A  PARTICULAR  PURPOSE ARE DISCLAIMED. IN NO EVENT  SHALL  THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL,    SPECIAL,   EXEMPLARY,   OR   CONSEQUENTIAL   DAMAGES
- * (INCLUDING,  BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES;  LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT  LIABILITY,  OR  TORT (INCLUDING  NEGLIGENCE  OR  OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-/* What encodings are enabled? */
-#include <uriparser/UriDefsConfig.h>
-#if (!defined(URI_PASS_ANSI) && !defined(URI_PASS_UNICODE))
-/* Include SELF twice */
-# define URI_PASS_ANSI 1
-# include "UriRecompose.c"
-# undef URI_PASS_ANSI
-# define URI_PASS_UNICODE 1
-# include "UriRecompose.c"
-# undef URI_PASS_UNICODE
-#else
-# ifdef URI_PASS_ANSI
-#  include <uriparser/UriDefsAnsi.h>
-# else
-#  include <uriparser/UriDefsUnicode.h>
-#  include <wchar.h>
-# endif
-
-
-
-#ifndef URI_DOXYGEN
-# include <uriparser/Uri.h>
-# include "UriCommon.h"
-#endif
-
-
-
-static int URI_FUNC(ToStringEngine)(URI_CHAR * dest, const URI_TYPE(Uri) * uri,
-		int maxChars, int * charsWritten, int * charsRequired);
-
-
-
-int URI_FUNC(ToStringCharsRequired)(const URI_TYPE(Uri) * uri,
-		int * charsRequired) {
-	const int MAX_CHARS = ((unsigned int)-1) >> 1;
-	return URI_FUNC(ToStringEngine)(NULL, uri, MAX_CHARS, NULL, charsRequired);
-}
-
-
-
-int URI_FUNC(ToString)(URI_CHAR * dest, const URI_TYPE(Uri) * uri,
-		int maxChars, int * charsWritten) {
-	return URI_FUNC(ToStringEngine)(dest, uri, maxChars, charsWritten, NULL);
-}
-
-
-
-static URI_INLINE int URI_FUNC(ToStringEngine)(URI_CHAR * dest,
-		const URI_TYPE(Uri) * uri, int maxChars, int * charsWritten,
-		int * charsRequired) {
-	int written = 0;
-	if ((uri == NULL) || ((dest == NULL) && (charsRequired == NULL))) {
-		if (charsWritten != NULL) {
-			*charsWritten = 0;
-		}
-		return URI_ERROR_NULL;
-	}
-
-	if (maxChars < 1) {
-		if (charsWritten != NULL) {
-			*charsWritten = 0;
-		}
-		return URI_ERROR_TOSTRING_TOO_LONG;
-	}
-	maxChars--; /* So we don't have to substract 1 for '\0' all the time */
-
-	/* [01/19]	result = "" */
-				if (dest != NULL) {
-					dest[0] = _UT('\0');
-				} else {
-					(*charsRequired) = 0;
-				}
-	/* [02/19]	if defined(scheme) then */
-				if (uri->scheme.first != NULL) {
-	/* [03/19]		append scheme to result; */
-					const int charsToWrite
-							= (int)(uri->scheme.afterLast - uri->scheme.first);
-					if (dest != NULL) {
-						if (written + charsToWrite <= maxChars) {
-							memcpy(dest + written, uri->scheme.first,
-									charsToWrite * sizeof(URI_CHAR));
-							written += charsToWrite;
-						} else {
-							dest[0] = _UT('\0');
-							if (charsWritten != NULL) {
-								*charsWritten = 0;
-							}
-							return URI_ERROR_TOSTRING_TOO_LONG;
-						}
-					} else {
-						(*charsRequired) += charsToWrite;
-					}
-	/* [04/19]		append ":" to result; */
-					if (dest != NULL) {
-						if (written + 1 <= maxChars) {
-							memcpy(dest + written, _UT(":"),
-									1 * sizeof(URI_CHAR));
-							written += 1;
-						} else {
-							dest[0] = _UT('\0');
-							if (charsWritten != NULL) {
-								*charsWritten = 0;
-							}
-							return URI_ERROR_TOSTRING_TOO_LONG;
-						}
-					} else {
-						(*charsRequired) += 1;
-					}
-	/* [05/19]	endif; */
-				}
-	/* [06/19]	if defined(authority) then */
-				if (URI_FUNC(IsHostSet)(uri)) {
-	/* [07/19]		append "//" to result; */
-					if (dest != NULL) {
-						if (written + 2 <= maxChars) {
-							memcpy(dest + written, _UT("//"),
-									2 * sizeof(URI_CHAR));
-							written += 2;
-						} else {
-							dest[0] = _UT('\0');
-							if (charsWritten != NULL) {
-								*charsWritten = 0;
-							}
-							return URI_ERROR_TOSTRING_TOO_LONG;
-						}
-					} else {
-						(*charsRequired) += 2;
-					}
-	/* [08/19]		append authority to result; */
-					/* UserInfo */
-					if (uri->userInfo.first != NULL) {
-						const int charsToWrite = (int)(uri->userInfo.afterLast - uri->userInfo.first);
-						if (dest != NULL) {
-							if (written + charsToWrite <= maxChars) {
-								memcpy(dest + written, uri->userInfo.first,
-										charsToWrite * sizeof(URI_CHAR));
-								written += charsToWrite;
-							} else {
-								dest[0] = _UT('\0');
-								if (charsWritten != NULL) {
-									*charsWritten = 0;
-								}
-								return URI_ERROR_TOSTRING_TOO_LONG;
-							}
-
-							if (written + 1 <= maxChars) {
-								memcpy(dest + written, _UT("@"),
-										1 * sizeof(URI_CHAR));
-								written += 1;
-							} else {
-								dest[0] = _UT('\0');
-								if (charsWritten != NULL) {
-									*charsWritten = 0;
-								}
-								return URI_ERROR_TOSTRING_TOO_LONG;
-							}
-						} else {
-							(*charsRequired) += charsToWrite + 1;
-						}
-					}
-
-					/* Host */
-					if (uri->hostData.ip4 != NULL) {
-						/* IPv4 */
-						int i = 0;
-						for (; i < 4; i++) {
-							const unsigned char value = uri->hostData.ip4->data[i];
-							const int charsToWrite = (value > 99) ? 3 : ((value > 9) ? 2 : 1);
-							if (dest != NULL) {
-								if (written + charsToWrite <= maxChars) {
-									URI_CHAR text[4];
-									URI_SNPRINTF(text, charsToWrite + 1, _UT("%i"), value);
-									memcpy(dest + written, text, charsToWrite * sizeof(URI_CHAR));
-									written += charsToWrite;
-								} else {
-									dest[0] = _UT('\0');
-									if (charsWritten != NULL) {
-										*charsWritten = 0;
-									}
-									return URI_ERROR_TOSTRING_TOO_LONG;
-								}
-								if (i < 3) {
-									if (written + 1 <= maxChars) {
-										memcpy(dest + written, _UT("."),
-												1 * sizeof(URI_CHAR));
-										written += 1;
-									} else {
-										dest[0] = _UT('\0');
-										if (charsWritten != NULL) {
-											*charsWritten = 0;
-										}
-										return URI_ERROR_TOSTRING_TOO_LONG;
-									}
-								}
-							} else {
-								(*charsRequired) += charsToWrite + 1;
-							}
-						}
-					} else if (uri->hostData.ip6 != NULL) {
-						/* IPv6 */
-						int i = 0;
-						if (dest != NULL) {
-							if (written + 1 <= maxChars) {
-								memcpy(dest + written, _UT("["),
-										1 * sizeof(URI_CHAR));
-								written += 1;
-							} else {
-								dest[0] = _UT('\0');
-								if (charsWritten != NULL) {
-									*charsWritten = 0;
-								}
-								return URI_ERROR_TOSTRING_TOO_LONG;
-							}
-						} else {
-							(*charsRequired) += 1;
-						}
-
-						for (; i < 16; i++) {
-							const unsigned char value = uri->hostData.ip6->data[i];
-							if (dest != NULL) {
-								if (written + 2 <= maxChars) {
-									URI_CHAR text[3];
-									URI_SNPRINTF(text, 2 + 1, _UT("%x"), value);
-									memcpy(dest + written, text, 2 * sizeof(URI_CHAR));
-									written += 2;
-								} else {
-									dest[0] = _UT('\0');
-									if (charsWritten != NULL) {
-										*charsWritten = 0;
-									}
-									return URI_ERROR_TOSTRING_TOO_LONG;
-								}
-							} else {
-								(*charsRequired) += 2;
-							}
-							if (((i & 1) == 1) && (i < 15)) {
-								if (dest != NULL) {
-									if (written + 1 <= maxChars) {
-										memcpy(dest + written, _UT(":"),
-												1 * sizeof(URI_CHAR));
-										written += 1;
-									} else {
-										dest[0] = _UT('\0');
-										if (charsWritten != NULL) {
-											*charsWritten = 0;
-										}
-										return URI_ERROR_TOSTRING_TOO_LONG;
-									}
-								} else {
-									(*charsRequired) += 1;
-								}
-							}
-						}
-
-						if (dest != NULL) {
-							if (written + 1 <= maxChars) {
-								memcpy(dest + written, _UT("]"),
-										1 * sizeof(URI_CHAR));
-								written += 1;
-							} else {
-								dest[0] = _UT('\0');
-								if (charsWritten != NULL) {
-									*charsWritten = 0;
-								}
-								return URI_ERROR_TOSTRING_TOO_LONG;
-							}
-						} else {
-							(*charsRequired) += 1;
-						}
-					} else if (uri->hostData.ipFuture.first != NULL) {
-						/* IPvFuture */
-						const int charsToWrite = (int)(uri->hostData.ipFuture.afterLast
-								- uri->hostData.ipFuture.first);
-						if (dest != NULL) {
-							if (written + 1 <= maxChars) {
-								memcpy(dest + written, _UT("["),
-										1 * sizeof(URI_CHAR));
-								written += 1;
-							} else {
-								dest[0] = _UT('\0');
-								if (charsWritten != NULL) {
-									*charsWritten = 0;
-								}
-								return URI_ERROR_TOSTRING_TOO_LONG;
-							}
-
-							if (written + charsToWrite <= maxChars) {
-								memcpy(dest + written, uri->hostData.ipFuture.first, charsToWrite * sizeof(URI_CHAR));
-								written += charsToWrite;
-							} else {
-								dest[0] = _UT('\0');
-								if (charsWritten != NULL) {
-									*charsWritten = 0;
-								}
-								return URI_ERROR_TOSTRING_TOO_LONG;
-							}
-
-							if (written + 1 <= maxChars) {
-								memcpy(dest + written, _UT("]"),
-										1 * sizeof(URI_CHAR));
-								written += 1;
-							} else {
-								dest[0] = _UT('\0');
-								if (charsWritten != NULL) {
-									*charsWritten = 0;
-								}
-								return URI_ERROR_TOSTRING_TOO_LONG;
-							}
-						} else {
-							(*charsRequired) += 1 + charsToWrite + 1;
-						}
-					} else if (uri->hostText.first != NULL) {
-						/* Regname */
-						const int charsToWrite = (int)(uri->hostText.afterLast - uri->hostText.first);
-						if (dest != NULL) {
-							if (written + charsToWrite <= maxChars) {
-								memcpy(dest + written, uri->hostText.first,
-										charsToWrite * sizeof(URI_CHAR));
-								written += charsToWrite;
-							} else {
-								dest[0] = _UT('\0');
-								if (charsWritten != NULL) {
-									*charsWritten = 0;
-								}
-								return URI_ERROR_TOSTRING_TOO_LONG;
-							}
-						} else {
-							(*charsRequired) += charsToWrite;
-						}
-					}
-
-					/* Port */
-					if (uri->portText.first != NULL) {
-						const int charsToWrite = (int)(uri->portText.afterLast - uri->portText.first);
-						if (dest != NULL) {
-							/* Leading ':' */
-							if (written + 1 <= maxChars) {
-									memcpy(dest + written, _UT(":"),
-											1 * sizeof(URI_CHAR));
-									written += 1;
-							} else {
-								dest[0] = _UT('\0');
-								if (charsWritten != NULL) {
-									*charsWritten = 0;
-								}
-								return URI_ERROR_TOSTRING_TOO_LONG;
-							}
-
-							/* Port number */
-							if (written + charsToWrite <= maxChars) {
-								memcpy(dest + written, uri->portText.first,
-										charsToWrite * sizeof(URI_CHAR));
-								written += charsToWrite;
-							} else {
-								dest[0] = _UT('\0');
-								if (charsWritten != NULL) {
-									*charsWritten = 0;
-								}
-								return URI_ERROR_TOSTRING_TOO_LONG;
-							}
-						} else {
-							(*charsRequired) += 1 + charsToWrite;
-						}
-					}
-
-					/* Slash between authority and path */
-					if (dest != NULL) {
-						if (written + 1 <= maxChars) {
-								memcpy(dest + written, _UT("/"),
-										1 * sizeof(URI_CHAR));
-								written += 1;
-						} else {
-							dest[0] = _UT('\0');
-							if (charsWritten != NULL) {
-								*charsWritten = 0;
-							}
-							return URI_ERROR_TOSTRING_TOO_LONG;
-						}
-					} else {
-						(*charsRequired) += 1;
-					}
-	/* [09/19]	endif; */
-				}
-	/* [10/19]	append path to result; */
-				if (uri->absolutePath && ((uri->scheme.first == NULL) || !URI_FUNC(IsHostSet)(uri))) {
-					if (dest != NULL) {
-						if (written + 1 <= maxChars) {
-								memcpy(dest + written, _UT("/"),
-										1 * sizeof(URI_CHAR));
-								written += 1;
-						} else {
-							dest[0] = _UT('\0');
-							if (charsWritten != NULL) {
-								*charsWritten = 0;
-							}
-							return URI_ERROR_TOSTRING_TOO_LONG;
-						}
-					} else {
-						(*charsRequired) += 1;
-					}
-				}
-
-				if (uri->pathHead != NULL) {
-					URI_TYPE(PathSegment) * walker = uri->pathHead;
-					do {
-						const int charsToWrite = (int)(walker->text.afterLast - walker->text.first);
-						if (dest != NULL) {
-							if (written + charsToWrite <= maxChars) {
-								memcpy(dest + written, walker->text.first,
-										charsToWrite * sizeof(URI_CHAR));
-								written += charsToWrite;
-							} else {
-								dest[0] = _UT('\0');
-								if (charsWritten != NULL) {
-									*charsWritten = 0;
-								}
-								return URI_ERROR_TOSTRING_TOO_LONG;
-							}
-						} else {
-							(*charsRequired) += charsToWrite;
-						}
-
-						/* Not last segment -> append slash */
-						if (walker->next != NULL) {
-							if (dest != NULL) {
-								if (written + 1 <= maxChars) {
-									memcpy(dest + written, _UT("/"),
-											1 * sizeof(URI_CHAR));
-									written += 1;
-								} else {
-									dest[0] = _UT('\0');
-									if (charsWritten != NULL) {
-										*charsWritten = 0;
-									}
-									return URI_ERROR_TOSTRING_TOO_LONG;
-								}
-							} else {
-								(*charsRequired) += 1;
-							}
-						}
-
-						walker = walker->next;
-					} while (walker != NULL);
-				}
-	/* [11/19]	if defined(query) then */
-				if (uri->query.first != NULL) {
-	/* [12/19]		append "?" to result; */
-					if (dest != NULL) {
-						if (written + 1 <= maxChars) {
-							memcpy(dest + written, _UT("?"),
-									1 * sizeof(URI_CHAR));
-							written += 1;
-						} else {
-							dest[0] = _UT('\0');
-							if (charsWritten != NULL) {
-								*charsWritten = 0;
-							}
-							return URI_ERROR_TOSTRING_TOO_LONG;
-						}
-					} else {
-						(*charsRequired) += 1;
-					}
-	/* [13/19]		append query to result; */
-					{
-						const int charsToWrite
-								= (int)(uri->query.afterLast - uri->query.first);
-						if (dest != NULL) {
-							if (written + charsToWrite <= maxChars) {
-								memcpy(dest + written, uri->query.first,
-										charsToWrite * sizeof(URI_CHAR));
-								written += charsToWrite;
-							} else {
-								dest[0] = _UT('\0');
-								if (charsWritten != NULL) {
-									*charsWritten = 0;
-								}
-								return URI_ERROR_TOSTRING_TOO_LONG;
-							}
-						} else {
-							(*charsRequired) += charsToWrite;
-						}
-					}
-	/* [14/19]	endif; */
-				}
-	/* [15/19]	if defined(fragment) then */
-				if (uri->fragment.first != NULL) {
-	/* [16/19]		append "#" to result; */
-					if (dest != NULL) {
-						if (written + 1 <= maxChars) {
-							memcpy(dest + written, _UT("#"),
-									1 * sizeof(URI_CHAR));
-							written += 1;
-						} else {
-							dest[0] = _UT('\0');
-							if (charsWritten != NULL) {
-								*charsWritten = 0;
-							}
-							return URI_ERROR_TOSTRING_TOO_LONG;
-						}
-					} else {
-						(*charsRequired) += 1;
-					}
-	/* [17/19]		append fragment to result; */
-					{
-						const int charsToWrite
-								= (int)(uri->fragment.afterLast - uri->fragment.first);
-						if (dest != NULL) {
-							if (written + charsToWrite <= maxChars) {
-								memcpy(dest + written, uri->fragment.first,
-										charsToWrite * sizeof(URI_CHAR));
-								written += charsToWrite;
-							} else {
-								dest[0] = _UT('\0');
-								if (charsWritten != NULL) {
-									*charsWritten = 0;
-								}
-								return URI_ERROR_TOSTRING_TOO_LONG;
-							}
-						} else {
-							(*charsRequired) += charsToWrite;
-						}
-					}
-	/* [18/19]	endif; */
-				}
-	/* [19/19]	return result; */
-				if (dest != NULL) {
-					dest[written++] = _UT('\0');
-					if (charsWritten != NULL) {
-						*charsWritten = written;
-					}
-				}
-				return URI_SUCCESS;
-}
-
-
-
-#endif
+/*
+ * uriparser - RFC 3986 URI parsing library
+ *
+ * Copyright (C) 2007, Weijia Song <songweijia@gmail.com>
+ * Copyright (C) 2007, Sebastian Pipping <webmaster@hartwork.org>
+ * All rights reserved.
+ *
+ * Redistribution  and use in source and binary forms, with or without
+ * modification,  are permitted provided that the following conditions
+ * are met:
+ *
+ *     * Redistributions   of  source  code  must  retain  the   above
+ *       copyright  notice, this list of conditions and the  following
+ *       disclaimer.
+ *
+ *     * Redistributions  in  binary  form must  reproduce  the  above
+ *       copyright  notice, this list of conditions and the  following
+ *       disclaimer   in  the  documentation  and/or  other  materials
+ *       provided with the distribution.
+ *
+ *     * Neither  the name of the <ORGANIZATION> nor the names of  its
+ *       contributors  may  be  used to endorse  or  promote  products
+ *       derived  from  this software without specific  prior  written
+ *       permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS  IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT  NOT
+ * LIMITED  TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND  FITNESS
+ * FOR  A  PARTICULAR  PURPOSE ARE DISCLAIMED. IN NO EVENT  SHALL  THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL,    SPECIAL,   EXEMPLARY,   OR   CONSEQUENTIAL   DAMAGES
+ * (INCLUDING,  BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES;  LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT  LIABILITY,  OR  TORT (INCLUDING  NEGLIGENCE  OR  OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/* What encodings are enabled? */
+#include <uriparser/UriDefsConfig.h>
+#if (!defined(URI_PASS_ANSI) && !defined(URI_PASS_UNICODE))
+/* Include SELF twice */
+# define URI_PASS_ANSI 1
+# include "UriRecompose.c"
+# undef URI_PASS_ANSI
+# define URI_PASS_UNICODE 1
+# include "UriRecompose.c"
+# undef URI_PASS_UNICODE
+#else
+# ifdef URI_PASS_ANSI
+#  include <uriparser/UriDefsAnsi.h>
+# else
+#  include <uriparser/UriDefsUnicode.h>
+#  include <wchar.h>
+# endif
+
+
+
+#ifndef URI_DOXYGEN
+# include <uriparser/Uri.h>
+# include "UriCommon.h"
+#endif
+
+
+
+static int URI_FUNC(ToStringEngine)(URI_CHAR * dest, const URI_TYPE(Uri) * uri,
+		int maxChars, int * charsWritten, int * charsRequired);
+
+
+
+int URI_FUNC(ToStringCharsRequired)(const URI_TYPE(Uri) * uri,
+		int * charsRequired) {
+	const int MAX_CHARS = ((unsigned int)-1) >> 1;
+	return URI_FUNC(ToStringEngine)(NULL, uri, MAX_CHARS, NULL, charsRequired);
+}
+
+
+
+int URI_FUNC(ToString)(URI_CHAR * dest, const URI_TYPE(Uri) * uri,
+		int maxChars, int * charsWritten) {
+	return URI_FUNC(ToStringEngine)(dest, uri, maxChars, charsWritten, NULL);
+}
+
+
+
+static URI_INLINE int URI_FUNC(ToStringEngine)(URI_CHAR * dest,
+		const URI_TYPE(Uri) * uri, int maxChars, int * charsWritten,
+		int * charsRequired) {
+	int written = 0;
+	if ((uri == NULL) || ((dest == NULL) && (charsRequired == NULL))) {
+		if (charsWritten != NULL) {
+			*charsWritten = 0;
+		}
+		return URI_ERROR_NULL;
+	}
+
+	if (maxChars < 1) {
+		if (charsWritten != NULL) {
+			*charsWritten = 0;
+		}
+		return URI_ERROR_TOSTRING_TOO_LONG;
+	}
+	maxChars--; /* So we don't have to substract 1 for '\0' all the time */
+
+	/* [01/19]	result = "" */
+				if (dest != NULL) {
+					dest[0] = _UT('\0');
+				} else {
+					(*charsRequired) = 0;
+				}
+	/* [02/19]	if defined(scheme) then */
+				if (uri->scheme.first != NULL) {
+	/* [03/19]		append scheme to result; */
+					const int charsToWrite
+							= (int)(uri->scheme.afterLast - uri->scheme.first);
+					if (dest != NULL) {
+						if (written + charsToWrite <= maxChars) {
+							memcpy(dest + written, uri->scheme.first,
+									charsToWrite * sizeof(URI_CHAR));
+							written += charsToWrite;
+						} else {
+							dest[0] = _UT('\0');
+							if (charsWritten != NULL) {
+								*charsWritten = 0;
+							}
+							return URI_ERROR_TOSTRING_TOO_LONG;
+						}
+					} else {
+						(*charsRequired) += charsToWrite;
+					}
+	/* [04/19]		append ":" to result; */
+					if (dest != NULL) {
+						if (written + 1 <= maxChars) {
+							memcpy(dest + written, _UT(":"),
+									1 * sizeof(URI_CHAR));
+							written += 1;
+						} else {
+							dest[0] = _UT('\0');
+							if (charsWritten != NULL) {
+								*charsWritten = 0;
+							}
+							return URI_ERROR_TOSTRING_TOO_LONG;
+						}
+					} else {
+						(*charsRequired) += 1;
+					}
+	/* [05/19]	endif; */
+				}
+	/* [06/19]	if defined(authority) then */
+				if (URI_FUNC(IsHostSet)(uri)) {
+	/* [07/19]		append "//" to result; */
+					if (dest != NULL) {
+						if (written + 2 <= maxChars) {
+							memcpy(dest + written, _UT("//"),
+									2 * sizeof(URI_CHAR));
+							written += 2;
+						} else {
+							dest[0] = _UT('\0');
+							if (charsWritten != NULL) {
+								*charsWritten = 0;
+							}
+							return URI_ERROR_TOSTRING_TOO_LONG;
+						}
+					} else {
+						(*charsRequired) += 2;
+					}
+	/* [08/19]		append authority to result; */
+					/* UserInfo */
+					if (uri->userInfo.first != NULL) {
+						const int charsToWrite = (int)(uri->userInfo.afterLast - uri->userInfo.first);
+						if (dest != NULL) {
+							if (written + charsToWrite <= maxChars) {
+								memcpy(dest + written, uri->userInfo.first,
+										charsToWrite * sizeof(URI_CHAR));
+								written += charsToWrite;
+							} else {
+								dest[0] = _UT('\0');
+								if (charsWritten != NULL) {
+									*charsWritten = 0;
+								}
+								return URI_ERROR_TOSTRING_TOO_LONG;
+							}
+
+							if (written + 1 <= maxChars) {
+								memcpy(dest + written, _UT("@"),
+										1 * sizeof(URI_CHAR));
+								written += 1;
+							} else {
+								dest[0] = _UT('\0');
+								if (charsWritten != NULL) {
+									*charsWritten = 0;
+								}
+								return URI_ERROR_TOSTRING_TOO_LONG;
+							}
+						} else {
+							(*charsRequired) += charsToWrite + 1;
+						}
+					}
+
+					/* Host */
+					if (uri->hostData.ip4 != NULL) {
+						/* IPv4 */
+						int i = 0;
+						for (; i < 4; i++) {
+							const unsigned char value = uri->hostData.ip4->data[i];
+							const int charsToWrite = (value > 99) ? 3 : ((value > 9) ? 2 : 1);
+							if (dest != NULL) {
+								if (written + charsToWrite <= maxChars) {
+									URI_CHAR text[4];
+									if (value > 99) {
+										text[0] = _UT('0') + (value / 100);
+										text[1] = _UT('0') + ((value % 100) / 10);
+										text[2] = _UT('0') + (value % 10);
+									} else if (value > 9)  {
+										text[0] = _UT('0') + (value / 10);
+										text[1] = _UT('0') + (value % 10);
+									} else {
+										text[0] = _UT('0') + value;
+									}
+									text[charsToWrite] = _UT('\0');
+									memcpy(dest + written, text, charsToWrite * sizeof(URI_CHAR));
+									written += charsToWrite;
+								} else {
+									dest[0] = _UT('\0');
+									if (charsWritten != NULL) {
+										*charsWritten = 0;
+									}
+									return URI_ERROR_TOSTRING_TOO_LONG;
+								}
+								if (i < 3) {
+									if (written + 1 <= maxChars) {
+										memcpy(dest + written, _UT("."),
+												1 * sizeof(URI_CHAR));
+										written += 1;
+									} else {
+										dest[0] = _UT('\0');
+										if (charsWritten != NULL) {
+											*charsWritten = 0;
+										}
+										return URI_ERROR_TOSTRING_TOO_LONG;
+									}
+								}
+							} else {
+								(*charsRequired) += charsToWrite + 1;
+							}
+						}
+					} else if (uri->hostData.ip6 != NULL) {
+						/* IPv6 */
+						int i = 0;
+						if (dest != NULL) {
+							if (written + 1 <= maxChars) {
+								memcpy(dest + written, _UT("["),
+										1 * sizeof(URI_CHAR));
+								written += 1;
+							} else {
+								dest[0] = _UT('\0');
+								if (charsWritten != NULL) {
+									*charsWritten = 0;
+								}
+								return URI_ERROR_TOSTRING_TOO_LONG;
+							}
+						} else {
+							(*charsRequired) += 1;
+						}
+
+						for (; i < 16; i++) {
+							const unsigned char value = uri->hostData.ip6->data[i];
+							if (dest != NULL) {
+								if (written + 2 <= maxChars) {
+									URI_CHAR text[3];
+									text[0] = URI_FUNC(HexToLetterEx)(value / 16, URI_FALSE);
+									text[1] = URI_FUNC(HexToLetterEx)(value % 16, URI_FALSE);
+									text[2] = _UT('\0');
+									memcpy(dest + written, text, 2 * sizeof(URI_CHAR));
+									written += 2;
+								} else {
+									dest[0] = _UT('\0');
+									if (charsWritten != NULL) {
+										*charsWritten = 0;
+									}
+									return URI_ERROR_TOSTRING_TOO_LONG;
+								}
+							} else {
+								(*charsRequired) += 2;
+							}
+							if (((i & 1) == 1) && (i < 15)) {
+								if (dest != NULL) {
+									if (written + 1 <= maxChars) {
+										memcpy(dest + written, _UT(":"),
+												1 * sizeof(URI_CHAR));
+										written += 1;
+									} else {
+										dest[0] = _UT('\0');
+										if (charsWritten != NULL) {
+											*charsWritten = 0;
+										}
+										return URI_ERROR_TOSTRING_TOO_LONG;
+									}
+								} else {
+									(*charsRequired) += 1;
+								}
+							}
+						}
+
+						if (dest != NULL) {
+							if (written + 1 <= maxChars) {
+								memcpy(dest + written, _UT("]"),
+										1 * sizeof(URI_CHAR));
+								written += 1;
+							} else {
+								dest[0] = _UT('\0');
+								if (charsWritten != NULL) {
+									*charsWritten = 0;
+								}
+								return URI_ERROR_TOSTRING_TOO_LONG;
+							}
+						} else {
+							(*charsRequired) += 1;
+						}
+					} else if (uri->hostData.ipFuture.first != NULL) {
+						/* IPvFuture */
+						const int charsToWrite = (int)(uri->hostData.ipFuture.afterLast
+								- uri->hostData.ipFuture.first);
+						if (dest != NULL) {
+							if (written + 1 <= maxChars) {
+								memcpy(dest + written, _UT("["),
+										1 * sizeof(URI_CHAR));
+								written += 1;
+							} else {
+								dest[0] = _UT('\0');
+								if (charsWritten != NULL) {
+									*charsWritten = 0;
+								}
+								return URI_ERROR_TOSTRING_TOO_LONG;
+							}
+
+							if (written + charsToWrite <= maxChars) {
+								memcpy(dest + written, uri->hostData.ipFuture.first, charsToWrite * sizeof(URI_CHAR));
+								written += charsToWrite;
+							} else {
+								dest[0] = _UT('\0');
+								if (charsWritten != NULL) {
+									*charsWritten = 0;
+								}
+								return URI_ERROR_TOSTRING_TOO_LONG;
+							}
+
+							if (written + 1 <= maxChars) {
+								memcpy(dest + written, _UT("]"),
+										1 * sizeof(URI_CHAR));
+								written += 1;
+							} else {
+								dest[0] = _UT('\0');
+								if (charsWritten != NULL) {
+									*charsWritten = 0;
+								}
+								return URI_ERROR_TOSTRING_TOO_LONG;
+							}
+						} else {
+							(*charsRequired) += 1 + charsToWrite + 1;
+						}
+					} else if (uri->hostText.first != NULL) {
+						/* Regname */
+						const int charsToWrite = (int)(uri->hostText.afterLast - uri->hostText.first);
+						if (dest != NULL) {
+							if (written + charsToWrite <= maxChars) {
+								memcpy(dest + written, uri->hostText.first,
+										charsToWrite * sizeof(URI_CHAR));
+								written += charsToWrite;
+							} else {
+								dest[0] = _UT('\0');
+								if (charsWritten != NULL) {
+									*charsWritten = 0;
+								}
+								return URI_ERROR_TOSTRING_TOO_LONG;
+							}
+						} else {
+							(*charsRequired) += charsToWrite;
+						}
+					}
+
+					/* Port */
+					if (uri->portText.first != NULL) {
+						const int charsToWrite = (int)(uri->portText.afterLast - uri->portText.first);
+						if (dest != NULL) {
+							/* Leading ':' */
+							if (written + 1 <= maxChars) {
+									memcpy(dest + written, _UT(":"),
+											1 * sizeof(URI_CHAR));
+									written += 1;
+							} else {
+								dest[0] = _UT('\0');
+								if (charsWritten != NULL) {
+									*charsWritten = 0;
+								}
+								return URI_ERROR_TOSTRING_TOO_LONG;
+							}
+
+							/* Port number */
+							if (written + charsToWrite <= maxChars) {
+								memcpy(dest + written, uri->portText.first,
+										charsToWrite * sizeof(URI_CHAR));
+								written += charsToWrite;
+							} else {
+								dest[0] = _UT('\0');
+								if (charsWritten != NULL) {
+									*charsWritten = 0;
+								}
+								return URI_ERROR_TOSTRING_TOO_LONG;
+							}
+						} else {
+							(*charsRequired) += 1 + charsToWrite;
+						}
+					}
+	/* [09/19]	endif; */
+				}
+	/* [10/19]	append path to result; */
+				/* Slash needed here? */
+				if (uri->absolutePath || ((uri->pathHead != NULL)
+						&& URI_FUNC(IsHostSet)(uri))) {
+					if (dest != NULL) {
+						if (written + 1 <= maxChars) {
+							memcpy(dest + written, _UT("/"),
+									1 * sizeof(URI_CHAR));
+							written += 1;
+						} else {
+							dest[0] = _UT('\0');
+							if (charsWritten != NULL) {
+								*charsWritten = 0;
+							}
+							return URI_ERROR_TOSTRING_TOO_LONG;
+						}
+					} else {
+						(*charsRequired) += 1;
+					}
+				}
+
+				if (uri->pathHead != NULL) {
+					URI_TYPE(PathSegment) * walker = uri->pathHead;
+					do {
+						const int charsToWrite = (int)(walker->text.afterLast - walker->text.first);
+						if (dest != NULL) {
+							if (written + charsToWrite <= maxChars) {
+								memcpy(dest + written, walker->text.first,
+										charsToWrite * sizeof(URI_CHAR));
+								written += charsToWrite;
+							} else {
+								dest[0] = _UT('\0');
+								if (charsWritten != NULL) {
+									*charsWritten = 0;
+								}
+								return URI_ERROR_TOSTRING_TOO_LONG;
+							}
+						} else {
+							(*charsRequired) += charsToWrite;
+						}
+
+						/* Not last segment -> append slash */
+						if (walker->next != NULL) {
+							if (dest != NULL) {
+								if (written + 1 <= maxChars) {
+									memcpy(dest + written, _UT("/"),
+											1 * sizeof(URI_CHAR));
+									written += 1;
+								} else {
+									dest[0] = _UT('\0');
+									if (charsWritten != NULL) {
+										*charsWritten = 0;
+									}
+									return URI_ERROR_TOSTRING_TOO_LONG;
+								}
+							} else {
+								(*charsRequired) += 1;
+							}
+						}
+
+						walker = walker->next;
+					} while (walker != NULL);
+				}
+	/* [11/19]	if defined(query) then */
+				if (uri->query.first != NULL) {
+	/* [12/19]		append "?" to result; */
+					if (dest != NULL) {
+						if (written + 1 <= maxChars) {
+							memcpy(dest + written, _UT("?"),
+									1 * sizeof(URI_CHAR));
+							written += 1;
+						} else {
+							dest[0] = _UT('\0');
+							if (charsWritten != NULL) {
+								*charsWritten = 0;
+							}
+							return URI_ERROR_TOSTRING_TOO_LONG;
+						}
+					} else {
+						(*charsRequired) += 1;
+					}
+	/* [13/19]		append query to result; */
+					{
+						const int charsToWrite
+								= (int)(uri->query.afterLast - uri->query.first);
+						if (dest != NULL) {
+							if (written + charsToWrite <= maxChars) {
+								memcpy(dest + written, uri->query.first,
+										charsToWrite * sizeof(URI_CHAR));
+								written += charsToWrite;
+							} else {
+								dest[0] = _UT('\0');
+								if (charsWritten != NULL) {
+									*charsWritten = 0;
+								}
+								return URI_ERROR_TOSTRING_TOO_LONG;
+							}
+						} else {
+							(*charsRequired) += charsToWrite;
+						}
+					}
+	/* [14/19]	endif; */
+				}
+	/* [15/19]	if defined(fragment) then */
+				if (uri->fragment.first != NULL) {
+	/* [16/19]		append "#" to result; */
+					if (dest != NULL) {
+						if (written + 1 <= maxChars) {
+							memcpy(dest + written, _UT("#"),
+									1 * sizeof(URI_CHAR));
+							written += 1;
+						} else {
+							dest[0] = _UT('\0');
+							if (charsWritten != NULL) {
+								*charsWritten = 0;
+							}
+							return URI_ERROR_TOSTRING_TOO_LONG;
+						}
+					} else {
+						(*charsRequired) += 1;
+					}
+	/* [17/19]		append fragment to result; */
+					{
+						const int charsToWrite
+								= (int)(uri->fragment.afterLast - uri->fragment.first);
+						if (dest != NULL) {
+							if (written + charsToWrite <= maxChars) {
+								memcpy(dest + written, uri->fragment.first,
+										charsToWrite * sizeof(URI_CHAR));
+								written += charsToWrite;
+							} else {
+								dest[0] = _UT('\0');
+								if (charsWritten != NULL) {
+									*charsWritten = 0;
+								}
+								return URI_ERROR_TOSTRING_TOO_LONG;
+							}
+						} else {
+							(*charsRequired) += charsToWrite;
+						}
+					}
+	/* [18/19]	endif; */
+				}
+	/* [19/19]	return result; */
+				if (dest != NULL) {
+					dest[written++] = _UT('\0');
+					if (charsWritten != NULL) {
+						*charsWritten = written;
+					}
+				}
+				return URI_SUCCESS;
+}
+
+
+
+#endif
diff -Nru /tmp/bxdedfLB6u/uriparser-0.6.0/lib/UriResolve.c /tmp/fLjZ2dz9P3/uriparser-0.7.4/lib/UriResolve.c
--- uriparser-0.6.0/lib/UriResolve.c	2007-09-12 18:53:22.000000000 +0100
+++ uriparser-0.7.4/lib/UriResolve.c	2008-12-20 18:52:47.000000000 +0000
@@ -1,243 +1,255 @@
-/*
- * uriparser - RFC 3986 URI parsing library
- *
- * Copyright (C) 2007, Weijia Song <songweijia@gmail.com>
- * Copyright (C) 2007, Sebastian Pipping <webmaster@hartwork.org>
- * All rights reserved.
- *
- * Redistribution  and use in source and binary forms, with or without
- * modification,  are permitted provided that the following conditions
- * are met:
- *
- *     * Redistributions   of  source  code  must  retain  the   above
- *       copyright  notice, this list of conditions and the  following
- *       disclaimer.
- *
- *     * Redistributions  in  binary  form must  reproduce  the  above
- *       copyright  notice, this list of conditions and the  following
- *       disclaimer   in  the  documentation  and/or  other  materials
- *       provided with the distribution.
- *
- *     * Neither  the name of the <ORGANIZATION> nor the names of  its
- *       contributors  may  be  used to endorse  or  promote  products
- *       derived  from  this software without specific  prior  written
- *       permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS  IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT  NOT
- * LIMITED  TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND  FITNESS
- * FOR  A  PARTICULAR  PURPOSE ARE DISCLAIMED. IN NO EVENT  SHALL  THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL,    SPECIAL,   EXEMPLARY,   OR   CONSEQUENTIAL   DAMAGES
- * (INCLUDING,  BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES;  LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT  LIABILITY,  OR  TORT (INCLUDING  NEGLIGENCE  OR  OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-/* What encodings are enabled? */
-#include <uriparser/UriDefsConfig.h>
-#if (!defined(URI_PASS_ANSI) && !defined(URI_PASS_UNICODE))
-/* Include SELF twice */
-# define URI_PASS_ANSI 1
-# include "UriResolve.c"
-# undef URI_PASS_ANSI
-# define URI_PASS_UNICODE 1
-# include "UriResolve.c"
-# undef URI_PASS_UNICODE
-#else
-# ifdef URI_PASS_ANSI
-#  include <uriparser/UriDefsAnsi.h>
-# else
-#  include <uriparser/UriDefsUnicode.h>
-#  include <wchar.h>
-# endif
-
-
-
-#ifndef URI_DOXYGEN
-# include <uriparser/Uri.h>
-# include "UriCommon.h"
-#endif
-
-
-
-static UriBool URI_FUNC(MergePath)(URI_TYPE(Uri) * absWork, const URI_TYPE(Uri) * relAppend);
-
-
-
-/* Appends a relative URI to an absolute. The last path segement of
- * the absolute URI is replaced. */
-static URI_INLINE UriBool URI_FUNC(MergePath)(URI_TYPE(Uri) * absWork,
-		const URI_TYPE(Uri) * relAppend) {
-	URI_TYPE(PathSegment) * sourceWalker;
-	URI_TYPE(PathSegment) * destPrev;
-	if (relAppend->pathHead == NULL) {
-		return URI_TRUE;
-	}
-
-	/* Replace last segment ("" if trailing slash) with first of append chain */
-	if (absWork->pathHead == NULL) {
-		URI_TYPE(PathSegment) * const dup = malloc(sizeof(URI_TYPE(PathSegment)));
-		if (dup == NULL) {
-			return URI_FALSE; /* Raises malloc error */
-		}
-		dup->next = NULL;
-		absWork->pathHead = dup;
-		absWork->pathTail = dup;
-	}
-	absWork->pathTail->text.first = relAppend->pathHead->text.first;
-	absWork->pathTail->text.afterLast = relAppend->pathHead->text.afterLast;
-
-	/* Append all the others */
-	sourceWalker = relAppend->pathHead->next;
-	if (sourceWalker == NULL) {
-		return URI_TRUE;
-	}
-	destPrev = absWork->pathTail;
-
-	for (;;) {
-		URI_TYPE(PathSegment) * const dup = malloc(sizeof(URI_TYPE(PathSegment)));
-		if (dup == NULL) {
-			destPrev->next = NULL;
-			absWork->pathTail = destPrev;
-			return URI_FALSE; /* Raises malloc error */
-		}
-		dup->text = sourceWalker->text;
-		destPrev->next = dup;
-
-		if (sourceWalker->next == NULL) {
-			absWork->pathTail = dup;
-			absWork->pathTail->next = NULL;
-			break;
-		}
-		destPrev = dup;
-		sourceWalker = sourceWalker->next;
-	}
-
-	return URI_TRUE;
-}
-
-
-
-int URI_FUNC(AddBaseUri)(URI_TYPE(Uri) * absDest,
-		const URI_TYPE(Uri) * relSource,
-		const URI_TYPE(Uri) * absBase) {
-	if ((absDest == NULL) || (relSource == NULL) || (absBase == NULL)) {
-		return URI_ERROR_NULL;
-	}
-
-	/* absBase absolute? */
-	if (absBase->scheme.first == NULL) {
-		return URI_ERROR_ADDBASE_REL_BASE;
-	}
-
-	URI_FUNC(ResetUri)(absDest);
-
-	/* [01/32]	if defined(R.scheme) then */
-				if (relSource->scheme.first != NULL) {
-	/* [02/32]		T.scheme = R.scheme; */
-					absDest->scheme = relSource->scheme;
-	/* [03/32]		T.authority = R.authority; */
-					if (!URI_FUNC(CopyAuthority)(absDest, relSource)) {
-						return URI_ERROR_MALLOC;
-					}
-	/* [04/32]		T.path = remove_dot_segments(R.path); */
-					if (!URI_FUNC(CopyPath)(absDest, relSource)) {
-						return URI_ERROR_MALLOC;
-					}
-					if (!URI_FUNC(RemoveDotSegments)(absDest)) {
-						return URI_ERROR_MALLOC;
-					}
-	/* [05/32]		T.query = R.query; */
-					absDest->query = relSource->query;
-	/* [06/32]	else */
-				} else {
-	/* [07/32]		if defined(R.authority) then */
-					if (URI_FUNC(IsHostSet)(relSource)) {
-	/* [08/32]			T.authority = R.authority; */
-						if (!URI_FUNC(CopyAuthority)(absDest, relSource)) {
-							return URI_ERROR_MALLOC;
-						}
-	/* [09/32]			T.path = remove_dot_segments(R.path); */
-						if (!URI_FUNC(CopyPath)(absDest, relSource)) {
-							return URI_ERROR_MALLOC;
-						}
-						if (!URI_FUNC(RemoveDotSegments)(absDest)) {
-							return URI_ERROR_MALLOC;
-						}
-	/* [10/32]			T.query = R.query; */
-						absDest->query = relSource->query;
-	/* [11/32]		else */
-					} else {
-	/* [12/32]			if (R.path == "") then */
-						if (relSource->pathHead == NULL) {
-	/* [13/32]				T.path = Base.path; */
-							if (!URI_FUNC(CopyPath)(absDest, absBase)) {
-								return URI_ERROR_MALLOC;
-							}
-	/* [14/32]				if defined(R.query) then */
-							if (relSource->query.first != NULL) {
-	/* [15/32]					T.query = R.query; */
-								absDest->query = relSource->query;
-	/* [16/32]				else */
-							} else {
-	/* [17/32]					T.query = Base.query; */
-								absDest->query = absBase->query;
-	/* [18/32]				endif; */
-							}
-	/* [19/32]			else */
-						} else {
-	/* [20/32]				if (R.path starts-with "/") then */
-							if (relSource->absolutePath) {
-	/* [21/32]					T.path = remove_dot_segments(R.path); */
-								if (!URI_FUNC(CopyPath)(absDest, relSource)) {
-									return URI_ERROR_MALLOC;
-								}
-								if (!URI_FUNC(RemoveDotSegments)(absDest)) {
-									return URI_ERROR_MALLOC;
-								}
-	/* [22/32]				else */
-							} else {
-	/* [23/32]					T.path = merge(Base.path, R.path); */
-								if (!URI_FUNC(CopyPath)(absDest, absBase)) {
-									return URI_ERROR_MALLOC;
-								}
-								if (!URI_FUNC(MergePath)(absDest, relSource)) {
-									return URI_ERROR_MALLOC;
-								}
-	/* [24/32]					T.path = remove_dot_segments(T.path); */
-								if (!URI_FUNC(RemoveDotSegments)(absDest)) {
-									return URI_ERROR_MALLOC;
-								}
-
-								if (!URI_FUNC(FixAmbiguity)(absDest)) {
-									return URI_ERROR_MALLOC;
-								}
-	/* [25/32]				endif; */
-							}
-	/* [26/32]				T.query = R.query; */
-							absDest->query = relSource->query;
-	/* [27/32]			endif; */
-						}
-	/* [28/32]			T.authority = Base.authority; */
-					if (!URI_FUNC(CopyAuthority)(absDest, absBase)) {
-						return URI_ERROR_MALLOC;
-					}
-	/* [29/32]		endif; */
-					}
-	/* [30/32]		T.scheme = Base.scheme; */
-					absDest->scheme = absBase->scheme;
-	/* [31/32]	endif; */
-				}
-	/* [32/32]	T.fragment = R.fragment; */
-				absDest->fragment = relSource->fragment;
-
-	return URI_SUCCESS;
-}
-
-
-
-#endif
+/*
+ * uriparser - RFC 3986 URI parsing library
+ *
+ * Copyright (C) 2007, Weijia Song <songweijia@gmail.com>
+ * Copyright (C) 2007, Sebastian Pipping <webmaster@hartwork.org>
+ * All rights reserved.
+ *
+ * Redistribution  and use in source and binary forms, with or without
+ * modification,  are permitted provided that the following conditions
+ * are met:
+ *
+ *     * Redistributions   of  source  code  must  retain  the   above
+ *       copyright  notice, this list of conditions and the  following
+ *       disclaimer.
+ *
+ *     * Redistributions  in  binary  form must  reproduce  the  above
+ *       copyright  notice, this list of conditions and the  following
+ *       disclaimer   in  the  documentation  and/or  other  materials
+ *       provided with the distribution.
+ *
+ *     * Neither  the name of the <ORGANIZATION> nor the names of  its
+ *       contributors  may  be  used to endorse  or  promote  products
+ *       derived  from  this software without specific  prior  written
+ *       permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS  IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT  NOT
+ * LIMITED  TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND  FITNESS
+ * FOR  A  PARTICULAR  PURPOSE ARE DISCLAIMED. IN NO EVENT  SHALL  THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL,    SPECIAL,   EXEMPLARY,   OR   CONSEQUENTIAL   DAMAGES
+ * (INCLUDING,  BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES;  LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT  LIABILITY,  OR  TORT (INCLUDING  NEGLIGENCE  OR  OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/* What encodings are enabled? */
+#include <uriparser/UriDefsConfig.h>
+#if (!defined(URI_PASS_ANSI) && !defined(URI_PASS_UNICODE))
+/* Include SELF twice */
+# define URI_PASS_ANSI 1
+# include "UriResolve.c"
+# undef URI_PASS_ANSI
+# define URI_PASS_UNICODE 1
+# include "UriResolve.c"
+# undef URI_PASS_UNICODE
+#else
+# ifdef URI_PASS_ANSI
+#  include <uriparser/UriDefsAnsi.h>
+# else
+#  include <uriparser/UriDefsUnicode.h>
+#  include <wchar.h>
+# endif
+
+
+
+#ifndef URI_DOXYGEN
+# include <uriparser/Uri.h>
+# include "UriCommon.h"
+#endif
+
+
+
+/* Appends a relative URI to an absolute. The last path segement of
+ * the absolute URI is replaced. */
+static URI_INLINE UriBool URI_FUNC(MergePath)(URI_TYPE(Uri) * absWork,
+		const URI_TYPE(Uri) * relAppend) {
+	URI_TYPE(PathSegment) * sourceWalker;
+	URI_TYPE(PathSegment) * destPrev;
+	if (relAppend->pathHead == NULL) {
+		return URI_TRUE;
+	}
+
+	/* Replace last segment ("" if trailing slash) with first of append chain */
+	if (absWork->pathHead == NULL) {
+		URI_TYPE(PathSegment) * const dup = malloc(sizeof(URI_TYPE(PathSegment)));
+		if (dup == NULL) {
+			return URI_FALSE; /* Raises malloc error */
+		}
+		dup->next = NULL;
+		absWork->pathHead = dup;
+		absWork->pathTail = dup;
+	}
+	absWork->pathTail->text.first = relAppend->pathHead->text.first;
+	absWork->pathTail->text.afterLast = relAppend->pathHead->text.afterLast;
+
+	/* Append all the others */
+	sourceWalker = relAppend->pathHead->next;
+	if (sourceWalker == NULL) {
+		return URI_TRUE;
+	}
+	destPrev = absWork->pathTail;
+
+	for (;;) {
+		URI_TYPE(PathSegment) * const dup = malloc(sizeof(URI_TYPE(PathSegment)));
+		if (dup == NULL) {
+			destPrev->next = NULL;
+			absWork->pathTail = destPrev;
+			return URI_FALSE; /* Raises malloc error */
+		}
+		dup->text = sourceWalker->text;
+		destPrev->next = dup;
+
+		if (sourceWalker->next == NULL) {
+			absWork->pathTail = dup;
+			absWork->pathTail->next = NULL;
+			break;
+		}
+		destPrev = dup;
+		sourceWalker = sourceWalker->next;
+	}
+
+	return URI_TRUE;
+}
+
+
+
+static int URI_FUNC(AddBaseUriImpl)(URI_TYPE(Uri) * absDest,
+		const URI_TYPE(Uri) * relSource,
+		const URI_TYPE(Uri) * absBase) {
+	if (absDest == NULL) {
+		return URI_ERROR_NULL;
+	}
+	URI_FUNC(ResetUri)(absDest);
+
+	if ((relSource == NULL) || (absBase == NULL)) {
+		return URI_ERROR_NULL;
+	}
+
+	/* absBase absolute? */
+	if (absBase->scheme.first == NULL) {
+		return URI_ERROR_ADDBASE_REL_BASE;
+	}
+
+	/* [01/32]	if defined(R.scheme) then */
+				if (relSource->scheme.first != NULL) {
+	/* [02/32]		T.scheme = R.scheme; */
+					absDest->scheme = relSource->scheme;
+	/* [03/32]		T.authority = R.authority; */
+					if (!URI_FUNC(CopyAuthority)(absDest, relSource)) {
+						return URI_ERROR_MALLOC;
+					}
+	/* [04/32]		T.path = remove_dot_segments(R.path); */
+					if (!URI_FUNC(CopyPath)(absDest, relSource)) {
+						return URI_ERROR_MALLOC;
+					}
+					if (!URI_FUNC(RemoveDotSegmentsAbsolute)(absDest)) {
+						return URI_ERROR_MALLOC;
+					}
+	/* [05/32]		T.query = R.query; */
+					absDest->query = relSource->query;
+	/* [06/32]	else */
+				} else {
+	/* [07/32]		if defined(R.authority) then */
+					if (URI_FUNC(IsHostSet)(relSource)) {
+	/* [08/32]			T.authority = R.authority; */
+						if (!URI_FUNC(CopyAuthority)(absDest, relSource)) {
+							return URI_ERROR_MALLOC;
+						}
+	/* [09/32]			T.path = remove_dot_segments(R.path); */
+						if (!URI_FUNC(CopyPath)(absDest, relSource)) {
+							return URI_ERROR_MALLOC;
+						}
+						if (!URI_FUNC(RemoveDotSegmentsAbsolute)(absDest)) {
+							return URI_ERROR_MALLOC;
+						}
+	/* [10/32]			T.query = R.query; */
+						absDest->query = relSource->query;
+	/* [11/32]		else */
+					} else {
+	/* [28/32]			T.authority = Base.authority; */
+						if (!URI_FUNC(CopyAuthority)(absDest, absBase)) {
+							return URI_ERROR_MALLOC;
+						}
+	/* [12/32]			if (R.path == "") then */
+						if (relSource->pathHead == NULL) {
+	/* [13/32]				T.path = Base.path; */
+							if (!URI_FUNC(CopyPath)(absDest, absBase)) {
+								return URI_ERROR_MALLOC;
+							}
+	/* [14/32]				if defined(R.query) then */
+							if (relSource->query.first != NULL) {
+	/* [15/32]					T.query = R.query; */
+								absDest->query = relSource->query;
+	/* [16/32]				else */
+							} else {
+	/* [17/32]					T.query = Base.query; */
+								absDest->query = absBase->query;
+	/* [18/32]				endif; */
+							}
+	/* [19/32]			else */
+						} else {
+	/* [20/32]				if (R.path starts-with "/") then */
+							if (relSource->absolutePath) {
+	/* [21/32]					T.path = remove_dot_segments(R.path); */
+								if (!URI_FUNC(CopyPath)(absDest, relSource)) {
+									return URI_ERROR_MALLOC;
+								}
+								if (!URI_FUNC(RemoveDotSegmentsAbsolute)(absDest)) {
+									return URI_ERROR_MALLOC;
+								}
+	/* [22/32]				else */
+							} else {
+	/* [23/32]					T.path = merge(Base.path, R.path); */
+								if (!URI_FUNC(CopyPath)(absDest, absBase)) {
+									return URI_ERROR_MALLOC;
+								}
+								if (!URI_FUNC(MergePath)(absDest, relSource)) {
+									return URI_ERROR_MALLOC;
+								}
+	/* [24/32]					T.path = remove_dot_segments(T.path); */
+								if (!URI_FUNC(RemoveDotSegmentsAbsolute)(absDest)) {
+									return URI_ERROR_MALLOC;
+								}
+
+								if (!URI_FUNC(FixAmbiguity)(absDest)) {
+									return URI_ERROR_MALLOC;
+								}
+	/* [25/32]				endif; */
+							}
+	/* [26/32]				T.query = R.query; */
+							absDest->query = relSource->query;
+	/* [27/32]			endif; */
+						}
+						URI_FUNC(FixEmptyTrailSegment)(absDest);
+	/* [29/32]		endif; */
+					}
+	/* [30/32]		T.scheme = Base.scheme; */
+					absDest->scheme = absBase->scheme;
+	/* [31/32]	endif; */
+				}
+	/* [32/32]	T.fragment = R.fragment; */
+				absDest->fragment = relSource->fragment;
+
+	return URI_SUCCESS;
+
+}
+
+
+
+int URI_FUNC(AddBaseUri)(URI_TYPE(Uri) * absDest,
+		const URI_TYPE(Uri) * relSource, const URI_TYPE(Uri) * absBase) {
+	const int res = URI_FUNC(AddBaseUriImpl)(absDest, relSource, absBase);
+	if ((res != URI_SUCCESS) && (absDest != NULL)) {
+		URI_FUNC(FreeUriMembers)(absDest);
+	}
+	return res;
+}
+
+
+
+#endif
diff -Nru /tmp/bxdedfLB6u/uriparser-0.6.0/lib/UriShorten.c /tmp/fLjZ2dz9P3/uriparser-0.7.4/lib/UriShorten.c
--- uriparser-0.6.0/lib/UriShorten.c	2007-09-12 18:53:22.000000000 +0100
+++ uriparser-0.7.4/lib/UriShorten.c	2008-12-20 18:52:47.000000000 +0000
@@ -1,299 +1,316 @@
-/*
- * uriparser - RFC 3986 URI parsing library
- *
- * Copyright (C) 2007, Weijia Song <songweijia@gmail.com>
- * Copyright (C) 2007, Sebastian Pipping <webmaster@hartwork.org>
- * All rights reserved.
- *
- * Redistribution  and use in source and binary forms, with or without
- * modification,  are permitted provided that the following conditions
- * are met:
- *
- *     * Redistributions   of  source  code  must  retain  the   above
- *       copyright  notice, this list of conditions and the  following
- *       disclaimer.
- *
- *     * Redistributions  in  binary  form must  reproduce  the  above
- *       copyright  notice, this list of conditions and the  following
- *       disclaimer   in  the  documentation  and/or  other  materials
- *       provided with the distribution.
- *
- *     * Neither  the name of the <ORGANIZATION> nor the names of  its
- *       contributors  may  be  used to endorse  or  promote  products
- *       derived  from  this software without specific  prior  written
- *       permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS  IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT  NOT
- * LIMITED  TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND  FITNESS
- * FOR  A  PARTICULAR  PURPOSE ARE DISCLAIMED. IN NO EVENT  SHALL  THE
- * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL,    SPECIAL,   EXEMPLARY,   OR   CONSEQUENTIAL   DAMAGES
- * (INCLUDING,  BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES;  LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT  LIABILITY,  OR  TORT (INCLUDING  NEGLIGENCE  OR  OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-/* What encodings are enabled? */
-#include <uriparser/UriDefsConfig.h>
-#if (!defined(URI_PASS_ANSI) && !defined(URI_PASS_UNICODE))
-/* Include SELF twice */
-# define URI_PASS_ANSI 1
-# include "UriShorten.c"
-# undef URI_PASS_ANSI
-# define URI_PASS_UNICODE 1
-# include "UriShorten.c"
-# undef URI_PASS_UNICODE
-#else
-# ifdef URI_PASS_ANSI
-#  include <uriparser/UriDefsAnsi.h>
-# else
-#  include <uriparser/UriDefsUnicode.h>
-#  include <wchar.h>
-# endif
-
-
-
-#ifndef URI_DOXYGEN
-# include <uriparser/Uri.h>
-# include "UriCommon.h"
-#endif
-
-
-
-static URI_INLINE UriBool URI_FUNC(AppendSegment)(URI_TYPE(Uri) * uri,
-		const URI_CHAR * first, const URI_CHAR * afterLast) {
-	/* Create segment */
-	URI_TYPE(PathSegment) * segment = malloc(1 * sizeof(URI_TYPE(PathSegment)));
-	if (segment == NULL) {
-		return URI_FALSE; /* Raises malloc error */
-	}
-	segment->next = NULL;
-	segment->text.first = first;
-	segment->text.afterLast = afterLast;
-
-	/* Put into chain */
-	if (uri->pathTail == NULL) {
-		uri->pathHead = segment;
-	} else {
-		uri->pathTail->next = segment;
-	}
-	uri->pathTail = segment;
-
-	return URI_TRUE;
-}
-
-
-
-static URI_INLINE UriBool URI_FUNC(EqualsAuthority)(const URI_TYPE(Uri) * first,
-		const URI_TYPE(Uri) * second) {
-	/* IPv4 */
-	if (first->hostData.ip4 != NULL) {
-		return ((second->hostData.ip4 != NULL)
-				&& !memcmp(first->hostData.ip4->data,
-					second->hostData.ip4->data, 4)) ? URI_TRUE : URI_FALSE;
-	}
-
-	/* IPv6 */
-	if (first->hostData.ip6 != NULL) {
-		return ((second->hostData.ip6 != NULL)
-				&& !memcmp(first->hostData.ip6->data,
-					second->hostData.ip6->data, 16)) ? URI_TRUE : URI_FALSE;
-	}
-
-	/* IPvFuture */
-	if (first->hostData.ipFuture.first != NULL) {
-		return ((second->hostData.ipFuture.first != NULL)
-				&& !URI_STRNCMP(first->hostData.ipFuture.first,
-					second->hostData.ipFuture.first,
-					first->hostData.ipFuture.afterLast
-					- first->hostData.ipFuture.first))
-						? URI_TRUE : URI_FALSE;
-	}
-
-	if (first->hostText.first != NULL) {
-		return ((second->hostText.first != NULL)
-				&& !URI_STRNCMP(first->hostText.first,
-					second->hostText.first,
-					first->hostText.afterLast
-					- first->hostText.first)) ? URI_TRUE : URI_FALSE;
-	}
-
-	return (second->hostText.first == NULL);
-}
-
-
-
-int URI_FUNC(RemoveBaseUri)(URI_TYPE(Uri) * dest,
-		const URI_TYPE(Uri) * absSource,
-		const URI_TYPE(Uri) * absBase,
-		UriBool domainRootMode) {
-	if ((dest == NULL) || (absSource == NULL) || (absBase == NULL)) {
-		return URI_ERROR_NULL;
-	}
-
-	/* absBase absolute? */
-	if (absBase->scheme.first == NULL) {
-		return URI_ERROR_REMOVEBASE_REL_BASE;
-	}
-
-	/* absSource absolute? */
-	if (absSource->scheme.first == NULL) {
-		return URI_ERROR_REMOVEBASE_REL_SOURCE;
-	}
-
-	URI_FUNC(ResetUri)(dest);
-
-	/* [XX/XX]	if (A.scheme != Base.scheme) then */
-				if (URI_STRNCMP(absSource->scheme.first, absBase->scheme.first,
-						absSource->scheme.afterLast - absSource->scheme.first)) {
-	/* [XX/XX]	   T.scheme    = A.scheme; */
-					dest->scheme = absSource->scheme;
-	/* [XX/XX]	   T.authority = A.authority; */
-					if (!URI_FUNC(CopyAuthority)(dest, absSource)) {
-						return URI_ERROR_MALLOC;
-					}
-	/* [XX/XX]	   T.path      = A.path; */
-					if (!URI_FUNC(CopyPath)(dest, absSource)) {
-						return URI_ERROR_MALLOC;
-					}
-	/* [XX/XX]	else */
-				} else {
-	/* [XX/XX]	   undef(T.scheme); */
-					/* NOOP */
-	/* [XX/XX]	   if (A.authority != Base.authority) then */
-					if (!URI_FUNC(EqualsAuthority)(absSource, absBase)) {
-	/* [XX/XX]	      T.authority = A.authority; */
-						if (!URI_FUNC(CopyAuthority)(dest, absSource)) {
-							return URI_ERROR_MALLOC;
-						}
-	/* [XX/XX]	      T.path      = A.path; */
-						if (!URI_FUNC(CopyPath)(dest, absSource)) {
-							return URI_ERROR_MALLOC;
-						}
-	/* [XX/XX]	   else */
-					} else {
-	/* [XX/XX]	      if domainRootMode then */
-						if (domainRootMode == URI_TRUE) {
-	/* [XX/XX]	         undef(T.authority); */
-							/* NOOP */
-	/* [XX/XX]	         if (first(A.path) == "") then */
-							/* GROUPED */
-	/* [XX/XX]	            T.path   = "/." + A.path; */
-								/* GROUPED */
-	/* [XX/XX]	         else */
-								/* GROUPED */
-	/* [XX/XX]	            T.path   = A.path; */
-								/* GROUPED */
-	/* [XX/XX]	         endif; */
-							if (!URI_FUNC(CopyPath)(dest, absSource)) {
-								return URI_ERROR_MALLOC;
-							}
-							dest->absolutePath = URI_TRUE;
-
-							if (!URI_FUNC(FixAmbiguity)(dest)) {
-								return URI_ERROR_MALLOC;
-							}
-	/* [XX/XX]	      else */
-						} else {
-							const URI_TYPE(PathSegment) * sourceSeg = absSource->pathHead;
-							const URI_TYPE(PathSegment) * baseSeg = absBase->pathHead;
-	/* [XX/XX]	         bool pathNaked = true; */
-							UriBool pathNaked = URI_TRUE;
-	/* [XX/XX]	         undef(last(Base.path)); */
-							/* NOOP */
-	/* [XX/XX]	         T.path = ""; */
-							dest->absolutePath = URI_FALSE;
-	/* [XX/XX]	         while (first(A.path) == first(Base.path)) do */
-							while ((sourceSeg != NULL) && (baseSeg != NULL)
-									&& !URI_STRNCMP(sourceSeg->text.first, baseSeg->text.first,
-									sourceSeg->text.afterLast - sourceSeg->text.first)
-									&& !((sourceSeg->text.first == sourceSeg->text.afterLast)
-										&& ((sourceSeg->next == NULL) != (baseSeg->next == NULL)))) {
-	/* [XX/XX]	            A.path++; */
-								sourceSeg = sourceSeg->next;
-	/* [XX/XX]	            Base.path++; */
-								baseSeg = baseSeg->next;
-	/* [XX/XX]	         endwhile; */
-							}
-	/* [XX/XX]	         while defined(first(Base.path)) do */
-							while ((baseSeg != NULL) && (baseSeg->next != NULL)) {
-	/* [XX/XX]	            Base.path++; */
-								baseSeg = baseSeg->next;
-	/* [XX/XX]	            T.path += "../"; */
-								if (!URI_FUNC(AppendSegment)(dest, URI_FUNC(ConstParent),
-										URI_FUNC(ConstParent) + 2)) {
-									return URI_ERROR_MALLOC;
-								}
-	/* [XX/XX]	            pathNaked = false; */
-								pathNaked = URI_FALSE;
-	/* [XX/XX]	         endwhile; */
-							}
-	/* [XX/XX]	         while defined(first(A.path)) do */
-							while (sourceSeg != NULL) {
-	/* [XX/XX]	            if pathNaked then */
-								if (pathNaked == URI_TRUE) {
-	/* [XX/XX]	               if (first(A.path) contains ":") then */
-									UriBool containsColon = URI_FALSE;
-									const URI_CHAR * ch = sourceSeg->text.first;
-									for (; ch < sourceSeg->text.afterLast; ch++) {
-										if (*ch == _UT(':')) {
-											containsColon = URI_TRUE;
-											break;
-										}
-									}
-
-									if (containsColon) {
-	/* [XX/XX]	                  T.path += "./"; */
-										if (!URI_FUNC(AppendSegment)(dest, URI_FUNC(ConstPwd),
-												URI_FUNC(ConstPwd) + 1)) {
-											return URI_ERROR_MALLOC;
-										}
-	/* [XX/XX]	               elseif (first(A.path) == "") then */
-									} else if (sourceSeg->text.first == sourceSeg->text.afterLast) {
-	/* [XX/XX]	                  T.path += "/."; */
-										if (!URI_FUNC(AppendSegment)(dest, URI_FUNC(ConstPwd),
-												URI_FUNC(ConstPwd) + 1)) {
-											return URI_ERROR_MALLOC;
-										}
-	/* [XX/XX]	               endif; */
-									}
-	/* [XX/XX]	            endif; */
-								}
-	/* [XX/XX]	            T.path += first(A.path); */
-								if (!URI_FUNC(AppendSegment)(dest, sourceSeg->text.first,
-										sourceSeg->text.afterLast)) {
-									return URI_ERROR_MALLOC;
-								}
-	/* [XX/XX]	            pathNaked = false; */
-								pathNaked = URI_FALSE;
-	/* [XX/XX]	            A.path++; */
-								sourceSeg = sourceSeg->next;
-	/* [XX/XX]	            if defined(first(A.path)) then */
-								/* NOOP */
-	/* [XX/XX]	               T.path += + "/"; */
-								/* NOOP */
-	/* [XX/XX]	            endif; */
-								/* NOOP */
-	/* [XX/XX]	         endwhile; */
-							}
-	/* [XX/XX]	      endif; */
-						}
-	/* [XX/XX]	   endif; */
-					}
-	/* [XX/XX]	endif; */
-				}
-	/* [XX/XX]	T.query     = A.query; */
-				dest->query = absSource->query;
-	/* [XX/XX]	T.fragment  = A.fragment; */
-				dest->fragment = absSource->fragment;
-
-	return URI_SUCCESS;
-}
-
-
-
-#endif
+/*
+ * uriparser - RFC 3986 URI parsing library
+ *
+ * Copyright (C) 2007, Weijia Song <songweijia@gmail.com>
+ * Copyright (C) 2007, Sebastian Pipping <webmaster@hartwork.org>
+ * All rights reserved.
+ *
+ * Redistribution  and use in source and binary forms, with or without
+ * modification,  are permitted provided that the following conditions
+ * are met:
+ *
+ *     * Redistributions   of  source  code  must  retain  the   above
+ *       copyright  notice, this list of conditions and the  following
+ *       disclaimer.
+ *
+ *     * Redistributions  in  binary  form must  reproduce  the  above
+ *       copyright  notice, this list of conditions and the  following
+ *       disclaimer   in  the  documentation  and/or  other  materials
+ *       provided with the distribution.
+ *
+ *     * Neither  the name of the <ORGANIZATION> nor the names of  its
+ *       contributors  may  be  used to endorse  or  promote  products
+ *       derived  from  this software without specific  prior  written
+ *       permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS  IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT  NOT
+ * LIMITED  TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND  FITNESS
+ * FOR  A  PARTICULAR  PURPOSE ARE DISCLAIMED. IN NO EVENT  SHALL  THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL,    SPECIAL,   EXEMPLARY,   OR   CONSEQUENTIAL   DAMAGES
+ * (INCLUDING,  BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES;  LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT  LIABILITY,  OR  TORT (INCLUDING  NEGLIGENCE  OR  OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/* What encodings are enabled? */
+#include <uriparser/UriDefsConfig.h>
+#if (!defined(URI_PASS_ANSI) && !defined(URI_PASS_UNICODE))
+/* Include SELF twice */
+# define URI_PASS_ANSI 1
+# include "UriShorten.c"
+# undef URI_PASS_ANSI
+# define URI_PASS_UNICODE 1
+# include "UriShorten.c"
+# undef URI_PASS_UNICODE
+#else
+# ifdef URI_PASS_ANSI
+#  include <uriparser/UriDefsAnsi.h>
+# else
+#  include <uriparser/UriDefsUnicode.h>
+#  include <wchar.h>
+# endif
+
+
+
+#ifndef URI_DOXYGEN
+# include <uriparser/Uri.h>
+# include "UriCommon.h"
+#endif
+
+
+
+static URI_INLINE UriBool URI_FUNC(AppendSegment)(URI_TYPE(Uri) * uri,
+		const URI_CHAR * first, const URI_CHAR * afterLast) {
+	/* Create segment */
+	URI_TYPE(PathSegment) * segment = malloc(1 * sizeof(URI_TYPE(PathSegment)));
+	if (segment == NULL) {
+		return URI_FALSE; /* Raises malloc error */
+	}
+	segment->next = NULL;
+	segment->text.first = first;
+	segment->text.afterLast = afterLast;
+
+	/* Put into chain */
+	if (uri->pathTail == NULL) {
+		uri->pathHead = segment;
+	} else {
+		uri->pathTail->next = segment;
+	}
+	uri->pathTail = segment;
+
+	return URI_TRUE;
+}
+
+
+
+static URI_INLINE UriBool URI_FUNC(EqualsAuthority)(const URI_TYPE(Uri) * first,
+		const URI_TYPE(Uri) * second) {
+	/* IPv4 */
+	if (first->hostData.ip4 != NULL) {
+		return ((second->hostData.ip4 != NULL)
+				&& !memcmp(first->hostData.ip4->data,
+					second->hostData.ip4->data, 4)) ? URI_TRUE : URI_FALSE;
+	}
+
+	/* IPv6 */
+	if (first->hostData.ip6 != NULL) {
+		return ((second->hostData.ip6 != NULL)
+				&& !memcmp(first->hostData.ip6->data,
+					second->hostData.ip6->data, 16)) ? URI_TRUE : URI_FALSE;
+	}
+
+	/* IPvFuture */
+	if (first->hostData.ipFuture.first != NULL) {
+		return ((second->hostData.ipFuture.first != NULL)
+				&& !URI_STRNCMP(first->hostData.ipFuture.first,
+					second->hostData.ipFuture.first,
+					first->hostData.ipFuture.afterLast
+					- first->hostData.ipFuture.first))
+						? URI_TRUE : URI_FALSE;
+	}
+
+	if (first->hostText.first != NULL) {
+		return ((second->hostText.first != NULL)
+				&& !URI_STRNCMP(first->hostText.first,
+					second->hostText.first,
+					first->hostText.afterLast
+					- first->hostText.first)) ? URI_TRUE : URI_FALSE;
+	}
+
+	return (second->hostText.first == NULL);
+}
+
+
+
+int URI_FUNC(RemoveBaseUriImpl)(URI_TYPE(Uri) * dest,
+		const URI_TYPE(Uri) * absSource,
+		const URI_TYPE(Uri) * absBase,
+		UriBool domainRootMode) {
+	if (dest == NULL) {
+		return URI_ERROR_NULL;
+	}
+	URI_FUNC(ResetUri)(dest);
+
+	if ((absSource == NULL) || (absBase == NULL)) {
+		return URI_ERROR_NULL;
+	}
+
+	/* absBase absolute? */
+	if (absBase->scheme.first == NULL) {
+		return URI_ERROR_REMOVEBASE_REL_BASE;
+	}
+
+	/* absSource absolute? */
+	if (absSource->scheme.first == NULL) {
+		return URI_ERROR_REMOVEBASE_REL_SOURCE;
+	}
+
+	/* [01/50]	if (A.scheme != Base.scheme) then */
+				if (URI_STRNCMP(absSource->scheme.first, absBase->scheme.first,
+						absSource->scheme.afterLast - absSource->scheme.first)) {
+	/* [02/50]	   T.scheme    = A.scheme; */
+					dest->scheme = absSource->scheme;
+	/* [03/50]	   T.authority = A.authority; */
+					if (!URI_FUNC(CopyAuthority)(dest, absSource)) {
+						return URI_ERROR_MALLOC;
+					}
+	/* [04/50]	   T.path      = A.path; */
+					if (!URI_FUNC(CopyPath)(dest, absSource)) {
+						return URI_ERROR_MALLOC;
+					}
+	/* [05/50]	else */
+				} else {
+	/* [06/50]	   undef(T.scheme); */
+					/* NOOP */
+	/* [07/50]	   if (A.authority != Base.authority) then */
+					if (!URI_FUNC(EqualsAuthority)(absSource, absBase)) {
+	/* [08/50]	      T.authority = A.authority; */
+						if (!URI_FUNC(CopyAuthority)(dest, absSource)) {
+							return URI_ERROR_MALLOC;
+						}
+	/* [09/50]	      T.path      = A.path; */
+						if (!URI_FUNC(CopyPath)(dest, absSource)) {
+							return URI_ERROR_MALLOC;
+						}
+	/* [10/50]	   else */
+					} else {
+	/* [11/50]	      if domainRootMode then */
+						if (domainRootMode == URI_TRUE) {
+	/* [12/50]	         undef(T.authority); */
+							/* NOOP */
+	/* [13/50]	         if (first(A.path) == "") then */
+							/* GROUPED */
+	/* [14/50]	            T.path   = "/." + A.path; */
+								/* GROUPED */
+	/* [15/50]	         else */
+								/* GROUPED */
+	/* [16/50]	            T.path   = A.path; */
+								/* GROUPED */
+	/* [17/50]	         endif; */
+							if (!URI_FUNC(CopyPath)(dest, absSource)) {
+								return URI_ERROR_MALLOC;
+							}
+							dest->absolutePath = URI_TRUE;
+
+							if (!URI_FUNC(FixAmbiguity)(dest)) {
+								return URI_ERROR_MALLOC;
+							}
+	/* [18/50]	      else */
+						} else {
+							const URI_TYPE(PathSegment) * sourceSeg = absSource->pathHead;
+							const URI_TYPE(PathSegment) * baseSeg = absBase->pathHead;
+	/* [19/50]	         bool pathNaked = true; */
+							UriBool pathNaked = URI_TRUE;
+	/* [20/50]	         undef(last(Base.path)); */
+							/* NOOP */
+	/* [21/50]	         T.path = ""; */
+							dest->absolutePath = URI_FALSE;
+	/* [22/50]	         while (first(A.path) == first(Base.path)) do */
+							while ((sourceSeg != NULL) && (baseSeg != NULL)
+									&& !URI_STRNCMP(sourceSeg->text.first, baseSeg->text.first,
+									sourceSeg->text.afterLast - sourceSeg->text.first)
+									&& !((sourceSeg->text.first == sourceSeg->text.afterLast)
+										&& ((sourceSeg->next == NULL) != (baseSeg->next == NULL)))) {
+	/* [23/50]	            A.path++; */
+								sourceSeg = sourceSeg->next;
+	/* [24/50]	            Base.path++; */
+								baseSeg = baseSeg->next;
+	/* [25/50]	         endwhile; */
+							}
+	/* [26/50]	         while defined(first(Base.path)) do */
+							while ((baseSeg != NULL) && (baseSeg->next != NULL)) {
+	/* [27/50]	            Base.path++; */
+								baseSeg = baseSeg->next;
+	/* [28/50]	            T.path += "../"; */
+								if (!URI_FUNC(AppendSegment)(dest, URI_FUNC(ConstParent),
+										URI_FUNC(ConstParent) + 2)) {
+									return URI_ERROR_MALLOC;
+								}
+	/* [29/50]	            pathNaked = false; */
+								pathNaked = URI_FALSE;
+	/* [30/50]	         endwhile; */
+							}
+	/* [31/50]	         while defined(first(A.path)) do */
+							while (sourceSeg != NULL) {
+	/* [32/50]	            if pathNaked then */
+								if (pathNaked == URI_TRUE) {
+	/* [33/50]	               if (first(A.path) contains ":") then */
+									UriBool containsColon = URI_FALSE;
+									const URI_CHAR * ch = sourceSeg->text.first;
+									for (; ch < sourceSeg->text.afterLast; ch++) {
+										if (*ch == _UT(':')) {
+											containsColon = URI_TRUE;
+											break;
+										}
+									}
+
+									if (containsColon) {
+	/* [34/50]	                  T.path += "./"; */
+										if (!URI_FUNC(AppendSegment)(dest, URI_FUNC(ConstPwd),
+												URI_FUNC(ConstPwd) + 1)) {
+											return URI_ERROR_MALLOC;
+										}
+	/* [35/50]	               elseif (first(A.path) == "") then */
+									} else if (sourceSeg->text.first == sourceSeg->text.afterLast) {
+	/* [36/50]	                  T.path += "/."; */
+										if (!URI_FUNC(AppendSegment)(dest, URI_FUNC(ConstPwd),
+												URI_FUNC(ConstPwd) + 1)) {
+											return URI_ERROR_MALLOC;
+										}
+	/* [37/50]	               endif; */
+									}
+	/* [38/50]	            endif; */
+								}
+	/* [39/50]	            T.path += first(A.path); */
+								if (!URI_FUNC(AppendSegment)(dest, sourceSeg->text.first,
+										sourceSeg->text.afterLast)) {
+									return URI_ERROR_MALLOC;
+								}
+	/* [40/50]	            pathNaked = false; */
+								pathNaked = URI_FALSE;
+	/* [41/50]	            A.path++; */
+								sourceSeg = sourceSeg->next;
+	/* [42/50]	            if defined(first(A.path)) then */
+								/* NOOP */
+	/* [43/50]	               T.path += + "/"; */
+								/* NOOP */
+	/* [44/50]	            endif; */
+								/* NOOP */
+	/* [45/50]	         endwhile; */
+							}
+	/* [46/50]	      endif; */
+						}
+	/* [47/50]	   endif; */
+					}
+	/* [48/50]	endif; */
+				}
+	/* [49/50]	T.query     = A.query; */
+				dest->query = absSource->query;
+	/* [50/50]	T.fragment  = A.fragment; */
+				dest->fragment = absSource->fragment;
+
+	return URI_SUCCESS;
+}
+
+
+
+int URI_FUNC(RemoveBaseUri)(URI_TYPE(Uri) * dest,
+		const URI_TYPE(Uri) * absSource,
+		const URI_TYPE(Uri) * absBase,
+		UriBool domainRootMode) {
+	const int res = URI_FUNC(RemoveBaseUriImpl)(dest, absSource,
+			absBase, domainRootMode);
+	if ((res != URI_SUCCESS) && (dest != NULL)) {
+		URI_FUNC(FreeUriMembers)(dest);
+	}
+	return res;
+}
+
+
+
+#endif
diff -Nru /tmp/bxdedfLB6u/uriparser-0.6.0/ltmain.sh /tmp/fLjZ2dz9P3/uriparser-0.7.4/ltmain.sh
--- uriparser-0.6.0/ltmain.sh	2007-03-24 12:42:51.000000000 +0000
+++ uriparser-0.7.4/ltmain.sh	1970-01-01 01:00:00.000000000 +0100
@@ -1,6927 +0,0 @@
-# ltmain.sh - Provide generalized library-building support services.
-# NOTE: Changing this file will not affect anything until you rerun configure.
-#
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, 2006,
-# 2007  Free Software Foundation, Inc.
-# Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
-#
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-basename="s,^.*/,,g"
-
-# Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh
-# is ksh but when the shell is invoked as "sh" and the current value of
-# the _XPG environment variable is not equal to 1 (one), the special
-# positional parameter $0, within a function call, is the name of the
-# function.
-progpath="$0"
-
-# The name of this program:
-progname=`echo "$progpath" | $SED $basename`
-modename="$progname"
-
-# Global variables:
-EXIT_SUCCESS=0
-EXIT_FAILURE=1
-
-PROGRAM=ltmain.sh
-PACKAGE=libtool
-VERSION=1.5.22
-TIMESTAMP=" (1.1220.2.436 2007/02/17 08:23:50)"
-
-# Be Bourne compatible (taken from Autoconf:_AS_BOURNE_COMPATIBLE).
-if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
-  emulate sh
-  NULLCMD=:
-  # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
-  # is contrary to our usage.  Disable this feature.
-  alias -g '${1+"$@"}'='"$@"'
-  setopt NO_GLOB_SUBST
-else
-  case `(set -o) 2>/dev/null` in *posix*) set -o posix;; esac
-fi
-BIN_SH=xpg4; export BIN_SH # for Tru64
-DUALCASE=1; export DUALCASE # for MKS sh
-
-# Check that we have a working $echo.
-if test "X$1" = X--no-reexec; then
-  # Discard the --no-reexec flag, and continue.
-  shift
-elif test "X$1" = X--fallback-echo; then
-  # Avoid inline document here, it may be left over
-  :
-elif test "X`($echo '\t') 2>/dev/null`" = 'X\t'; then
-  # Yippee, $echo works!
-  :
-else
-  # Restart under the correct shell, and then maybe $echo will work.
-  exec $SHELL "$progpath" --no-reexec ${1+"$@"}
-fi
-
-if test "X$1" = X--fallback-echo; then
-  # used as fallback echo
-  shift
-  cat <<EOF
-$*
-EOF
-  exit $EXIT_SUCCESS
-fi
-
-default_mode=
-help="Try \`$progname --help' for more information."
-magic="%%%MAGIC variable%%%"
-mkdir="mkdir"
-mv="mv -f"
-rm="rm -f"
-
-# Sed substitution that helps us do robust quoting.  It backslashifies
-# metacharacters that are still active within double-quoted strings.
-Xsed="${SED}"' -e 1s/^X//'
-sed_quote_subst='s/\([\\`\\"$\\\\]\)/\\\1/g'
-# test EBCDIC or ASCII
-case `echo X|tr X '\101'` in
- A) # ASCII based system
-    # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr
-  SP2NL='tr \040 \012'
-  NL2SP='tr \015\012 \040\040'
-  ;;
- *) # EBCDIC based system
-  SP2NL='tr \100 \n'
-  NL2SP='tr \r\n \100\100'
-  ;;
-esac
-
-# NLS nuisances.
-# Only set LANG and LC_ALL to C if already set.
-# These must not be set unconditionally because not all systems understand
-# e.g. LANG=C (notably SCO).
-# We save the old values to restore during execute mode.
-for lt_var in LANG LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
-do
-  eval "if test \"\${$lt_var+set}\" = set; then
-	  save_$lt_var=\$$lt_var
-	  $lt_var=C
-	  export $lt_var
-	fi"
-done
-
-# Make sure IFS has a sensible default
-lt_nl='
-'
-IFS=" 	$lt_nl"
-
-if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then
-  $echo "$modename: not configured to build any kind of library" 1>&2
-  $echo "Fatal configuration error.  See the $PACKAGE docs for more information." 1>&2
-  exit $EXIT_FAILURE
-fi
-
-# Global variables.
-mode=$default_mode
-nonopt=
-prev=
-prevopt=
-run=
-show="$echo"
-show_help=
-execute_dlfiles=
-duplicate_deps=no
-preserve_args=
-lo2o="s/\\.lo\$/.${objext}/"
-o2lo="s/\\.${objext}\$/.lo/"
-extracted_archives=
-extracted_serial=0
-
-#####################################
-# Shell function definitions:
-# This seems to be the best place for them
-
-# func_mktempdir [string]
-# Make a temporary directory that won't clash with other running
-# libtool processes, and avoids race conditions if possible.  If
-# given, STRING is the basename for that directory.
-func_mktempdir ()
-{
-    my_template="${TMPDIR-/tmp}/${1-$progname}"
-
-    if test "$run" = ":"; then
-      # Return a directory name, but don't create it in dry-run mode
-      my_tmpdir="${my_template}-$$"
-    else
-
-      # If mktemp works, use that first and foremost
-      my_tmpdir=`mktemp -d "${my_template}-XXXXXXXX" 2>/dev/null`
-
-      if test ! -d "$my_tmpdir"; then
-	# Failing that, at least try and use $RANDOM to avoid a race
-	my_tmpdir="${my_template}-${RANDOM-0}$$"
-
-	save_mktempdir_umask=`umask`
-	umask 0077
-	$mkdir "$my_tmpdir"
-	umask $save_mktempdir_umask
-      fi
-
-      # If we're not in dry-run mode, bomb out on failure
-      test -d "$my_tmpdir" || {
-        $echo "cannot create temporary directory \`$my_tmpdir'" 1>&2
-	exit $EXIT_FAILURE
-      }
-    fi
-
-    $echo "X$my_tmpdir" | $Xsed
-}
-
-
-# func_win32_libid arg
-# return the library type of file 'arg'
-#
-# Need a lot of goo to handle *both* DLLs and import libs
-# Has to be a shell function in order to 'eat' the argument
-# that is supplied when $file_magic_command is called.
-func_win32_libid ()
-{
-  win32_libid_type="unknown"
-  win32_fileres=`file -L $1 2>/dev/null`
-  case $win32_fileres in
-  *ar\ archive\ import\ library*) # definitely import
-    win32_libid_type="x86 archive import"
-    ;;
-  *ar\ archive*) # could be an import, or static
-    if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null | \
-      $EGREP -e 'file format pe-i386(.*architecture: i386)?' >/dev/null ; then
-      win32_nmres=`eval $NM -f posix -A $1 | \
-	$SED -n -e '1,100{
-		/ I /{
-			s,.*,import,
-			p
-			q
-			}
-		}'`
-      case $win32_nmres in
-      import*)  win32_libid_type="x86 archive import";;
-      *)        win32_libid_type="x86 archive static";;
-      esac
-    fi
-    ;;
-  *DLL*)
-    win32_libid_type="x86 DLL"
-    ;;
-  *executable*) # but shell scripts are "executable" too...
-    case $win32_fileres in
-    *MS\ Windows\ PE\ Intel*)
-      win32_libid_type="x86 DLL"
-      ;;
-    esac
-    ;;
-  esac
-  $echo $win32_libid_type
-}
-
-
-# func_infer_tag arg
-# Infer tagged configuration to use if any are available and
-# if one wasn't chosen via the "--tag" command line option.
-# Only attempt this if the compiler in the base compile
-# command doesn't match the default compiler.
-# arg is usually of the form 'gcc ...'
-func_infer_tag ()
-{
-    if test -n "$available_tags" && test -z "$tagname"; then
-      CC_quoted=
-      for arg in $CC; do
-	case $arg in
-	  *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
-	  arg="\"$arg\""
-	  ;;
-	esac
-	CC_quoted="$CC_quoted $arg"
-      done
-      case $@ in
-      # Blanks in the command may have been stripped by the calling shell,
-      # but not from the CC environment variable when configure was run.
-      " $CC "* | "$CC "* | " `$echo $CC` "* | "`$echo $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$echo $CC_quoted` "* | "`$echo $CC_quoted` "*) ;;
-      # Blanks at the start of $base_compile will cause this to fail
-      # if we don't check for them as well.
-      *)
-	for z in $available_tags; do
-	  if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$progpath" > /dev/null; then
-	    # Evaluate the configuration.
-	    eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $progpath`"
-	    CC_quoted=
-	    for arg in $CC; do
-	    # Double-quote args containing other shell metacharacters.
-	    case $arg in
-	      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
-	      arg="\"$arg\""
-	      ;;
-	    esac
-	    CC_quoted="$CC_quoted $arg"
-	  done
-	    case "$@ " in
-	      " $CC "* | "$CC "* | " `$echo $CC` "* | "`$echo $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$echo $CC_quoted` "* | "`$echo $CC_quoted` "*)
-	      # The compiler in the base compile command matches
-	      # the one in the tagged configuration.
-	      # Assume this is the tagged configuration we want.
-	      tagname=$z
-	      break
-	      ;;
-	    esac
-	  fi
-	done
-	# If $tagname still isn't set, then no tagged configuration
-	# was found and let the user know that the "--tag" command
-	# line option must be used.
-	if test -z "$tagname"; then
-	  $echo "$modename: unable to infer tagged configuration"
-	  $echo "$modename: specify a tag with \`--tag'" 1>&2
-	  exit $EXIT_FAILURE
-#        else
-#          $echo "$modename: using $tagname tagged configuration"
-	fi
-	;;
-      esac
-    fi
-}
-
-
-# func_extract_an_archive dir oldlib
-func_extract_an_archive ()
-{
-    f_ex_an_ar_dir="$1"; shift
-    f_ex_an_ar_oldlib="$1"
-
-    $show "(cd $f_ex_an_ar_dir && $AR x $f_ex_an_ar_oldlib)"
-    $run eval "(cd \$f_ex_an_ar_dir && $AR x \$f_ex_an_ar_oldlib)" || exit $?
-    if ($AR t "$f_ex_an_ar_oldlib" | sort | sort -uc >/dev/null 2>&1); then
-     :
-    else
-      $echo "$modename: ERROR: object name conflicts: $f_ex_an_ar_dir/$f_ex_an_ar_oldlib" 1>&2
-      exit $EXIT_FAILURE
-    fi
-}
-
-# func_extract_archives gentop oldlib ...
-func_extract_archives ()
-{
-    my_gentop="$1"; shift
-    my_oldlibs=${1+"$@"}
-    my_oldobjs=""
-    my_xlib=""
-    my_xabs=""
-    my_xdir=""
-    my_status=""
-
-    $show "${rm}r $my_gentop"
-    $run ${rm}r "$my_gentop"
-    $show "$mkdir $my_gentop"
-    $run $mkdir "$my_gentop"
-    my_status=$?
-    if test "$my_status" -ne 0 && test ! -d "$my_gentop"; then
-      exit $my_status
-    fi
-
-    for my_xlib in $my_oldlibs; do
-      # Extract the objects.
-      case $my_xlib in
-	[\\/]* | [A-Za-z]:[\\/]*) my_xabs="$my_xlib" ;;
-	*) my_xabs=`pwd`"/$my_xlib" ;;
-      esac
-      my_xlib=`$echo "X$my_xlib" | $Xsed -e 's%^.*/%%'`
-      my_xlib_u=$my_xlib
-      while :; do
-        case " $extracted_archives " in
-	*" $my_xlib_u "*)
-	  extracted_serial=`expr $extracted_serial + 1`
-	  my_xlib_u=lt$extracted_serial-$my_xlib ;;
-	*) break ;;
-	esac
-      done
-      extracted_archives="$extracted_archives $my_xlib_u"
-      my_xdir="$my_gentop/$my_xlib_u"
-
-      $show "${rm}r $my_xdir"
-      $run ${rm}r "$my_xdir"
-      $show "$mkdir $my_xdir"
-      $run $mkdir "$my_xdir"
-      exit_status=$?
-      if test "$exit_status" -ne 0 && test ! -d "$my_xdir"; then
-	exit $exit_status
-      fi
-      case $host in
-      *-darwin*)
-	$show "Extracting $my_xabs"
-	# Do not bother doing anything if just a dry run
-	if test -z "$run"; then
-	  darwin_orig_dir=`pwd`
-	  cd $my_xdir || exit $?
-	  darwin_archive=$my_xabs
-	  darwin_curdir=`pwd`
-	  darwin_base_archive=`$echo "X$darwin_archive" | $Xsed -e 's%^.*/%%'`
-	  darwin_arches=`lipo -info "$darwin_archive" 2>/dev/null | $EGREP Architectures 2>/dev/null`
-	  if test -n "$darwin_arches"; then 
-	    darwin_arches=`echo "$darwin_arches" | $SED -e 's/.*are://'`
-	    darwin_arch=
-	    $show "$darwin_base_archive has multiple architectures $darwin_arches"
-	    for darwin_arch in  $darwin_arches ; do
-	      mkdir -p "unfat-$$/${darwin_base_archive}-${darwin_arch}"
-	      lipo -thin $darwin_arch -output "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" "${darwin_archive}"
-	      cd "unfat-$$/${darwin_base_archive}-${darwin_arch}"
-	      func_extract_an_archive "`pwd`" "${darwin_base_archive}"
-	      cd "$darwin_curdir"
-	      $rm "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}"
-	    done # $darwin_arches
-      ## Okay now we have a bunch of thin objects, gotta fatten them up :)
-	    darwin_filelist=`find unfat-$$ -type f -name \*.o -print -o -name \*.lo -print| xargs basename | sort -u | $NL2SP`
-	    darwin_file=
-	    darwin_files=
-	    for darwin_file in $darwin_filelist; do
-	      darwin_files=`find unfat-$$ -name $darwin_file -print | $NL2SP`
-	      lipo -create -output "$darwin_file" $darwin_files
-	    done # $darwin_filelist
-	    ${rm}r unfat-$$
-	    cd "$darwin_orig_dir"
-	  else
-	    cd "$darwin_orig_dir"
- 	    func_extract_an_archive "$my_xdir" "$my_xabs"
-	  fi # $darwin_arches
-	fi # $run
-	;;
-      *)
-        func_extract_an_archive "$my_xdir" "$my_xabs"
-        ;;
-      esac
-      my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | $NL2SP`
-    done
-    func_extract_archives_result="$my_oldobjs"
-}
-# End of Shell function definitions
-#####################################
-
-# Darwin sucks
-eval std_shrext=\"$shrext_cmds\"
-
-disable_libs=no
-
-# Parse our command line options once, thoroughly.
-while test "$#" -gt 0
-do
-  arg="$1"
-  shift
-
-  case $arg in
-  -*=*) optarg=`$echo "X$arg" | $Xsed -e 's/[-_a-zA-Z0-9]*=//'` ;;
-  *) optarg= ;;
-  esac
-
-  # If the previous option needs an argument, assign it.
-  if test -n "$prev"; then
-    case $prev in
-    execute_dlfiles)
-      execute_dlfiles="$execute_dlfiles $arg"
-      ;;
-    tag)
-      tagname="$arg"
-      preserve_args="${preserve_args}=$arg"
-
-      # Check whether tagname contains only valid characters
-      case $tagname in
-      *[!-_A-Za-z0-9,/]*)
-	$echo "$progname: invalid tag name: $tagname" 1>&2
-	exit $EXIT_FAILURE
-	;;
-      esac
-
-      case $tagname in
-      CC)
-	# Don't test for the "default" C tag, as we know, it's there, but
-	# not specially marked.
-	;;
-      *)
-	if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "$progpath" > /dev/null; then
-	  taglist="$taglist $tagname"
-	  # Evaluate the configuration.
-	  eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$tagname'$/,/^# ### END LIBTOOL TAG CONFIG: '$tagname'$/p' < $progpath`"
-	else
-	  $echo "$progname: ignoring unknown tag $tagname" 1>&2
-	fi
-	;;
-      esac
-      ;;
-    *)
-      eval "$prev=\$arg"
-      ;;
-    esac
-
-    prev=
-    prevopt=
-    continue
-  fi
-
-  # Have we seen a non-optional argument yet?
-  case $arg in
-  --help)
-    show_help=yes
-    ;;
-
-  --version)
-    echo "\
-$PROGRAM (GNU $PACKAGE) $VERSION$TIMESTAMP
-
-Copyright (C) 2007  Free Software Foundation, Inc.
-This is free software; see the source for copying conditions.  There is NO
-warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
-    exit $?
-    ;;
-
-  --config)
-    ${SED} -e '1,/^# ### BEGIN LIBTOOL CONFIG/d' -e '/^# ### END LIBTOOL CONFIG/,$d' $progpath
-    # Now print the configurations for the tags.
-    for tagname in $taglist; do
-      ${SED} -n -e "/^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$/,/^# ### END LIBTOOL TAG CONFIG: $tagname$/p" < "$progpath"
-    done
-    exit $?
-    ;;
-
-  --debug)
-    $echo "$progname: enabling shell trace mode"
-    set -x
-    preserve_args="$preserve_args $arg"
-    ;;
-
-  --dry-run | -n)
-    run=:
-    ;;
-
-  --features)
-    $echo "host: $host"
-    if test "$build_libtool_libs" = yes; then
-      $echo "enable shared libraries"
-    else
-      $echo "disable shared libraries"
-    fi
-    if test "$build_old_libs" = yes; then
-      $echo "enable static libraries"
-    else
-      $echo "disable static libraries"
-    fi
-    exit $?
-    ;;
-
-  --finish) mode="finish" ;;
-
-  --mode) prevopt="--mode" prev=mode ;;
-  --mode=*) mode="$optarg" ;;
-
-  --preserve-dup-deps) duplicate_deps="yes" ;;
-
-  --quiet | --silent)
-    show=:
-    preserve_args="$preserve_args $arg"
-    ;;
-
-  --tag)
-    prevopt="--tag"
-    prev=tag
-    preserve_args="$preserve_args --tag"
-    ;;
-  --tag=*)
-    set tag "$optarg" ${1+"$@"}
-    shift
-    prev=tag
-    preserve_args="$preserve_args --tag"
-    ;;
-
-  -dlopen)
-    prevopt="-dlopen"
-    prev=execute_dlfiles
-    ;;
-
-  -*)
-    $echo "$modename: unrecognized option \`$arg'" 1>&2
-    $echo "$help" 1>&2
-    exit $EXIT_FAILURE
-    ;;
-
-  *)
-    nonopt="$arg"
-    break
-    ;;
-  esac
-done
-
-if test -n "$prevopt"; then
-  $echo "$modename: option \`$prevopt' requires an argument" 1>&2
-  $echo "$help" 1>&2
-  exit $EXIT_FAILURE
-fi
-
-case $disable_libs in
-no) 
-  ;;
-shared)
-  build_libtool_libs=no
-  build_old_libs=yes
-  ;;
-static)
-  build_old_libs=`case $build_libtool_libs in yes) echo no;; *) echo yes;; esac`
-  ;;
-esac
-
-# If this variable is set in any of the actions, the command in it
-# will be execed at the end.  This prevents here-documents from being
-# left over by shells.
-exec_cmd=
-
-if test -z "$show_help"; then
-
-  # Infer the operation mode.
-  if test -z "$mode"; then
-    $echo "*** Warning: inferring the mode of operation is deprecated." 1>&2
-    $echo "*** Future versions of Libtool will require --mode=MODE be specified." 1>&2
-    case $nonopt in
-    *cc | cc* | *++ | gcc* | *-gcc* | g++* | xlc*)
-      mode=link
-      for arg
-      do
-	case $arg in
-	-c)
-	   mode=compile
-	   break
-	   ;;
-	esac
-      done
-      ;;
-    *db | *dbx | *strace | *truss)
-      mode=execute
-      ;;
-    *install*|cp|mv)
-      mode=install
-      ;;
-    *rm)
-      mode=uninstall
-      ;;
-    *)
-      # If we have no mode, but dlfiles were specified, then do execute mode.
-      test -n "$execute_dlfiles" && mode=execute
-
-      # Just use the default operation mode.
-      if test -z "$mode"; then
-	if test -n "$nonopt"; then
-	  $echo "$modename: warning: cannot infer operation mode from \`$nonopt'" 1>&2
-	else
-	  $echo "$modename: warning: cannot infer operation mode without MODE-ARGS" 1>&2
-	fi
-      fi
-      ;;
-    esac
-  fi
-
-  # Only execute mode is allowed to have -dlopen flags.
-  if test -n "$execute_dlfiles" && test "$mode" != execute; then
-    $echo "$modename: unrecognized option \`-dlopen'" 1>&2
-    $echo "$help" 1>&2
-    exit $EXIT_FAILURE
-  fi
-
-  # Change the help message to a mode-specific one.
-  generic_help="$help"
-  help="Try \`$modename --help --mode=$mode' for more information."
-
-  # These modes are in order of execution frequency so that they run quickly.
-  case $mode in
-  # libtool compile mode
-  compile)
-    modename="$modename: compile"
-    # Get the compilation command and the source file.
-    base_compile=
-    srcfile="$nonopt"  #  always keep a non-empty value in "srcfile"
-    suppress_opt=yes
-    suppress_output=
-    arg_mode=normal
-    libobj=
-    later=
-
-    for arg
-    do
-      case $arg_mode in
-      arg  )
-	# do not "continue".  Instead, add this to base_compile
-	lastarg="$arg"
-	arg_mode=normal
-	;;
-
-      target )
-	libobj="$arg"
-	arg_mode=normal
-	continue
-	;;
-
-      normal )
-	# Accept any command-line options.
-	case $arg in
-	-o)
-	  if test -n "$libobj" ; then
-	    $echo "$modename: you cannot specify \`-o' more than once" 1>&2
-	    exit $EXIT_FAILURE
-	  fi
-	  arg_mode=target
-	  continue
-	  ;;
-
-	-static | -prefer-pic | -prefer-non-pic)
-	  later="$later $arg"
-	  continue
-	  ;;
-
-	-no-suppress)
-	  suppress_opt=no
-	  continue
-	  ;;
-
-	-Xcompiler)
-	  arg_mode=arg  #  the next one goes into the "base_compile" arg list
-	  continue      #  The current "srcfile" will either be retained or
-	  ;;            #  replaced later.  I would guess that would be a bug.
-
-	-Wc,*)
-	  args=`$echo "X$arg" | $Xsed -e "s/^-Wc,//"`
-	  lastarg=
-	  save_ifs="$IFS"; IFS=','
- 	  for arg in $args; do
-	    IFS="$save_ifs"
-
-	    # Double-quote args containing other shell metacharacters.
-	    # Many Bourne shells cannot handle close brackets correctly
-	    # in scan sets, so we specify it separately.
-	    case $arg in
-	      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
-	      arg="\"$arg\""
-	      ;;
-	    esac
-	    lastarg="$lastarg $arg"
-	  done
-	  IFS="$save_ifs"
-	  lastarg=`$echo "X$lastarg" | $Xsed -e "s/^ //"`
-
-	  # Add the arguments to base_compile.
-	  base_compile="$base_compile $lastarg"
-	  continue
-	  ;;
-
-	* )
-	  # Accept the current argument as the source file.
-	  # The previous "srcfile" becomes the current argument.
-	  #
-	  lastarg="$srcfile"
-	  srcfile="$arg"
-	  ;;
-	esac  #  case $arg
-	;;
-      esac    #  case $arg_mode
-
-      # Aesthetically quote the previous argument.
-      lastarg=`$echo "X$lastarg" | $Xsed -e "$sed_quote_subst"`
-
-      case $lastarg in
-      # Double-quote args containing other shell metacharacters.
-      # Many Bourne shells cannot handle close brackets correctly
-      # in scan sets, and some SunOS ksh mistreat backslash-escaping
-      # in scan sets (worked around with variable expansion),
-      # and furthermore cannot handle '|' '&' '(' ')' in scan sets 
-      # at all, so we specify them separately.
-      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
-	lastarg="\"$lastarg\""
-	;;
-      esac
-
-      base_compile="$base_compile $lastarg"
-    done # for arg
-
-    case $arg_mode in
-    arg)
-      $echo "$modename: you must specify an argument for -Xcompile"
-      exit $EXIT_FAILURE
-      ;;
-    target)
-      $echo "$modename: you must specify a target with \`-o'" 1>&2
-      exit $EXIT_FAILURE
-      ;;
-    *)
-      # Get the name of the library object.
-      [ -z "$libobj" ] && libobj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%'`
-      ;;
-    esac
-
-    # Recognize several different file suffixes.
-    # If the user specifies -o file.o, it is replaced with file.lo
-    xform='[cCFSifmso]'
-    case $libobj in
-    *.ada) xform=ada ;;
-    *.adb) xform=adb ;;
-    *.ads) xform=ads ;;
-    *.asm) xform=asm ;;
-    *.c++) xform=c++ ;;
-    *.cc) xform=cc ;;
-    *.ii) xform=ii ;;
-    *.class) xform=class ;;
-    *.cpp) xform=cpp ;;
-    *.cxx) xform=cxx ;;
-    *.[fF][09]?) xform=[fF][09]. ;;
-    *.for) xform=for ;;
-    *.java) xform=java ;;
-    *.obj) xform=obj ;;
-    esac
-
-    libobj=`$echo "X$libobj" | $Xsed -e "s/\.$xform$/.lo/"`
-
-    case $libobj in
-    *.lo) obj=`$echo "X$libobj" | $Xsed -e "$lo2o"` ;;
-    *)
-      $echo "$modename: cannot determine name of library object from \`$libobj'" 1>&2
-      exit $EXIT_FAILURE
-      ;;
-    esac
-
-    func_infer_tag $base_compile
-
-    for arg in $later; do
-      case $arg in
-      -static)
-	build_old_libs=yes
-	continue
-	;;
-
-      -prefer-pic)
-	pic_mode=yes
-	continue
-	;;
-
-      -prefer-non-pic)
-	pic_mode=no
-	continue
-	;;
-      esac
-    done
-
-    qlibobj=`$echo "X$libobj" | $Xsed -e "$sed_quote_subst"`
-    case $qlibobj in
-      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
-	qlibobj="\"$qlibobj\"" ;;
-    esac
-    test "X$libobj" != "X$qlibobj" \
-	&& $echo "X$libobj" | grep '[]~#^*{};<>?"'"'"' 	&()|`$[]' \
-	&& $echo "$modename: libobj name \`$libobj' may not contain shell special characters."
-    objname=`$echo "X$obj" | $Xsed -e 's%^.*/%%'`
-    xdir=`$echo "X$obj" | $Xsed -e 's%/[^/]*$%%'`
-    if test "X$xdir" = "X$obj"; then
-      xdir=
-    else
-      xdir=$xdir/
-    fi
-    lobj=${xdir}$objdir/$objname
-
-    if test -z "$base_compile"; then
-      $echo "$modename: you must specify a compilation command" 1>&2
-      $echo "$help" 1>&2
-      exit $EXIT_FAILURE
-    fi
-
-    # Delete any leftover library objects.
-    if test "$build_old_libs" = yes; then
-      removelist="$obj $lobj $libobj ${libobj}T"
-    else
-      removelist="$lobj $libobj ${libobj}T"
-    fi
-
-    $run $rm $removelist
-    trap "$run $rm $removelist; exit $EXIT_FAILURE" 1 2 15
-
-    # On Cygwin there's no "real" PIC flag so we must build both object types
-    case $host_os in
-    cygwin* | mingw* | pw32* | os2*)
-      pic_mode=default
-      ;;
-    esac
-    if test "$pic_mode" = no && test "$deplibs_check_method" != pass_all; then
-      # non-PIC code in shared libraries is not supported
-      pic_mode=default
-    fi
-
-    # Calculate the filename of the output object if compiler does
-    # not support -o with -c
-    if test "$compiler_c_o" = no; then
-      output_obj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%' -e 's%\.[^.]*$%%'`.${objext}
-      lockfile="$output_obj.lock"
-      removelist="$removelist $output_obj $lockfile"
-      trap "$run $rm $removelist; exit $EXIT_FAILURE" 1 2 15
-    else
-      output_obj=
-      need_locks=no
-      lockfile=
-    fi
-
-    # Lock this critical section if it is needed
-    # We use this script file to make the link, it avoids creating a new file
-    if test "$need_locks" = yes; then
-      until $run ln "$progpath" "$lockfile" 2>/dev/null; do
-	$show "Waiting for $lockfile to be removed"
-	sleep 2
-      done
-    elif test "$need_locks" = warn; then
-      if test -f "$lockfile"; then
-	$echo "\
-*** ERROR, $lockfile exists and contains:
-`cat $lockfile 2>/dev/null`
-
-This indicates that another process is trying to use the same
-temporary object file, and libtool could not work around it because
-your compiler does not support \`-c' and \`-o' together.  If you
-repeat this compilation, it may succeed, by chance, but you had better
-avoid parallel builds (make -j) in this platform, or get a better
-compiler."
-
-	$run $rm $removelist
-	exit $EXIT_FAILURE
-      fi
-      $echo "$srcfile" > "$lockfile"
-    fi
-
-    if test -n "$fix_srcfile_path"; then
-      eval srcfile=\"$fix_srcfile_path\"
-    fi
-    qsrcfile=`$echo "X$srcfile" | $Xsed -e "$sed_quote_subst"`
-    case $qsrcfile in
-      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
-      qsrcfile="\"$qsrcfile\"" ;;
-    esac
-
-    $run $rm "$libobj" "${libobj}T"
-
-    # Create a libtool object file (analogous to a ".la" file),
-    # but don't create it if we're doing a dry run.
-    test -z "$run" && cat > ${libobj}T <<EOF
-# $libobj - a libtool object file
-# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP
-#
-# Please DO NOT delete this file!
-# It is necessary for linking the library.
-
-# Name of the PIC object.
-EOF
-
-    # Only build a PIC object if we are building libtool libraries.
-    if test "$build_libtool_libs" = yes; then
-      # Without this assignment, base_compile gets emptied.
-      fbsd_hideous_sh_bug=$base_compile
-
-      if test "$pic_mode" != no; then
-	command="$base_compile $qsrcfile $pic_flag"
-      else
-	# Don't build PIC code
-	command="$base_compile $qsrcfile"
-      fi
-
-      if test ! -d "${xdir}$objdir"; then
-	$show "$mkdir ${xdir}$objdir"
-	$run $mkdir ${xdir}$objdir
-	exit_status=$?
-	if test "$exit_status" -ne 0 && test ! -d "${xdir}$objdir"; then
-	  exit $exit_status
-	fi
-      fi
-
-      if test -z "$output_obj"; then
-	# Place PIC objects in $objdir
-	command="$command -o $lobj"
-      fi
-
-      $run $rm "$lobj" "$output_obj"
-
-      $show "$command"
-      if $run eval "$command"; then :
-      else
-	test -n "$output_obj" && $run $rm $removelist
-	exit $EXIT_FAILURE
-      fi
-
-      if test "$need_locks" = warn &&
-	 test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then
-	$echo "\
-*** ERROR, $lockfile contains:
-`cat $lockfile 2>/dev/null`
-
-but it should contain:
-$srcfile
-
-This indicates that another process is trying to use the same
-temporary object file, and libtool could not work around it because
-your compiler does not support \`-c' and \`-o' together.  If you
-repeat this compilation, it may succeed, by chance, but you had better
-avoid parallel builds (make -j) in this platform, or get a better
-compiler."
-
-	$run $rm $removelist
-	exit $EXIT_FAILURE
-      fi
-
-      # Just move the object if needed, then go on to compile the next one
-      if test -n "$output_obj" && test "X$output_obj" != "X$lobj"; then
-	$show "$mv $output_obj $lobj"
-	if $run $mv $output_obj $lobj; then :
-	else
-	  error=$?
-	  $run $rm $removelist
-	  exit $error
-	fi
-      fi
-
-      # Append the name of the PIC object to the libtool object file.
-      test -z "$run" && cat >> ${libobj}T <<EOF
-pic_object='$objdir/$objname'
-
-EOF
-
-      # Allow error messages only from the first compilation.
-      if test "$suppress_opt" = yes; then
-        suppress_output=' >/dev/null 2>&1'
-      fi
-    else
-      # No PIC object so indicate it doesn't exist in the libtool
-      # object file.
-      test -z "$run" && cat >> ${libobj}T <<EOF
-pic_object=none
-
-EOF
-    fi
-
-    # Only build a position-dependent object if we build old libraries.
-    if test "$build_old_libs" = yes; then
-      if test "$pic_mode" != yes; then
-	# Don't build PIC code
-	command="$base_compile $qsrcfile"
-      else
-	command="$base_compile $qsrcfile $pic_flag"
-      fi
-      if test "$compiler_c_o" = yes; then
-	command="$command -o $obj"
-      fi
-
-      # Suppress compiler output if we already did a PIC compilation.
-      command="$command$suppress_output"
-      $run $rm "$obj" "$output_obj"
-      $show "$command"
-      if $run eval "$command"; then :
-      else
-	$run $rm $removelist
-	exit $EXIT_FAILURE
-      fi
-
-      if test "$need_locks" = warn &&
-	 test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then
-	$echo "\
-*** ERROR, $lockfile contains:
-`cat $lockfile 2>/dev/null`
-
-but it should contain:
-$srcfile
-
-This indicates that another process is trying to use the same
-temporary object file, and libtool could not work around it because
-your compiler does not support \`-c' and \`-o' together.  If you
-repeat this compilation, it may succeed, by chance, but you had better
-avoid parallel builds (make -j) in this platform, or get a better
-compiler."
-
-	$run $rm $removelist
-	exit $EXIT_FAILURE
-      fi
-
-      # Just move the object if needed
-      if test -n "$output_obj" && test "X$output_obj" != "X$obj"; then
-	$show "$mv $output_obj $obj"
-	if $run $mv $output_obj $obj; then :
-	else
-	  error=$?
-	  $run $rm $removelist
-	  exit $error
-	fi
-      fi
-
-      # Append the name of the non-PIC object the libtool object file.
-      # Only append if the libtool object file exists.
-      test -z "$run" && cat >> ${libobj}T <<EOF
-# Name of the non-PIC object.
-non_pic_object='$objname'
-
-EOF
-    else
-      # Append the name of the non-PIC object the libtool object file.
-      # Only append if the libtool object file exists.
-      test -z "$run" && cat >> ${libobj}T <<EOF
-# Name of the non-PIC object.
-non_pic_object=none
-
-EOF
-    fi
-
-    $run $mv "${libobj}T" "${libobj}"
-
-    # Unlock the critical section if it was locked
-    if test "$need_locks" != no; then
-      $run $rm "$lockfile"
-    fi
-
-    exit $EXIT_SUCCESS
-    ;;
-
-  # libtool link mode
-  link | relink)
-    modename="$modename: link"
-    case $host in
-    *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
-      # It is impossible to link a dll without this setting, and
-      # we shouldn't force the makefile maintainer to figure out
-      # which system we are compiling for in order to pass an extra
-      # flag for every libtool invocation.
-      # allow_undefined=no
-
-      # FIXME: Unfortunately, there are problems with the above when trying
-      # to make a dll which has undefined symbols, in which case not
-      # even a static library is built.  For now, we need to specify
-      # -no-undefined on the libtool link line when we can be certain
-      # that all symbols are satisfied, otherwise we get a static library.
-      allow_undefined=yes
-      ;;
-    *)
-      allow_undefined=yes
-      ;;
-    esac
-    libtool_args="$nonopt"
-    base_compile="$nonopt $@"
-    compile_command="$nonopt"
-    finalize_command="$nonopt"
-
-    compile_rpath=
-    finalize_rpath=
-    compile_shlibpath=
-    finalize_shlibpath=
-    convenience=
-    old_convenience=
-    deplibs=
-    old_deplibs=
-    compiler_flags=
-    linker_flags=
-    dllsearchpath=
-    lib_search_path=`pwd`
-    inst_prefix_dir=
-
-    avoid_version=no
-    dlfiles=
-    dlprefiles=
-    dlself=no
-    export_dynamic=no
-    export_symbols=
-    export_symbols_regex=
-    generated=
-    libobjs=
-    ltlibs=
-    module=no
-    no_install=no
-    objs=
-    non_pic_objects=
-    notinst_path= # paths that contain not-installed libtool libraries
-    precious_files_regex=
-    prefer_static_libs=no
-    preload=no
-    prev=
-    prevarg=
-    release=
-    rpath=
-    xrpath=
-    perm_rpath=
-    temp_rpath=
-    thread_safe=no
-    vinfo=
-    vinfo_number=no
-
-    func_infer_tag $base_compile
-
-    # We need to know -static, to get the right output filenames.
-    for arg
-    do
-      case $arg in
-      -all-static | -static | -static-libtool-libs)
-	case $arg in
-	-all-static)
-	  if test "$build_libtool_libs" = yes && test -z "$link_static_flag"; then
-	    $echo "$modename: warning: complete static linking is impossible in this configuration" 1>&2
-	  fi
-	  if test -n "$link_static_flag"; then
-	    dlopen_self=$dlopen_self_static
-	  fi
-	  prefer_static_libs=yes
-	  ;;
-	-static)
-	  if test -z "$pic_flag" && test -n "$link_static_flag"; then
-	    dlopen_self=$dlopen_self_static
-	  fi
-	  prefer_static_libs=built
-	  ;;
-	-static-libtool-libs)
-	  if test -z "$pic_flag" && test -n "$link_static_flag"; then
-	    dlopen_self=$dlopen_self_static
-	  fi
-	  prefer_static_libs=yes
-	  ;;
-	esac
-	build_libtool_libs=no
-	build_old_libs=yes
-	break
-	;;
-      esac
-    done
-
-    # See if our shared archives depend on static archives.
-    test -n "$old_archive_from_new_cmds" && build_old_libs=yes
-
-    # Go through the arguments, transforming them on the way.
-    while test "$#" -gt 0; do
-      arg="$1"
-      shift
-      case $arg in
-      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
-	qarg=\"`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`\" ### testsuite: skip nested quoting test
-	;;
-      *) qarg=$arg ;;
-      esac
-      libtool_args="$libtool_args $qarg"
-
-      # If the previous option needs an argument, assign it.
-      if test -n "$prev"; then
-	case $prev in
-	output)
-	  compile_command="$compile_command @OUTPUT@"
-	  finalize_command="$finalize_command @OUTPUT@"
-	  ;;
-	esac
-
-	case $prev in
-	dlfiles|dlprefiles)
-	  if test "$preload" = no; then
-	    # Add the symbol object into the linking commands.
-	    compile_command="$compile_command @SYMFILE@"
-	    finalize_command="$finalize_command @SYMFILE@"
-	    preload=yes
-	  fi
-	  case $arg in
-	  *.la | *.lo) ;;  # We handle these cases below.
-	  force)
-	    if test "$dlself" = no; then
-	      dlself=needless
-	      export_dynamic=yes
-	    fi
-	    prev=
-	    continue
-	    ;;
-	  self)
-	    if test "$prev" = dlprefiles; then
-	      dlself=yes
-	    elif test "$prev" = dlfiles && test "$dlopen_self" != yes; then
-	      dlself=yes
-	    else
-	      dlself=needless
-	      export_dynamic=yes
-	    fi
-	    prev=
-	    continue
-	    ;;
-	  *)
-	    if test "$prev" = dlfiles; then
-	      dlfiles="$dlfiles $arg"
-	    else
-	      dlprefiles="$dlprefiles $arg"
-	    fi
-	    prev=
-	    continue
-	    ;;
-	  esac
-	  ;;
-	expsyms)
-	  export_symbols="$arg"
-	  if test ! -f "$arg"; then
-	    $echo "$modename: symbol file \`$arg' does not exist"
-	    exit $EXIT_FAILURE
-	  fi
-	  prev=
-	  continue
-	  ;;
-	expsyms_regex)
-	  export_symbols_regex="$arg"
-	  prev=
-	  continue
-	  ;;
-	inst_prefix)
-	  inst_prefix_dir="$arg"
-	  prev=
-	  continue
-	  ;;
-	precious_regex)
-	  precious_files_regex="$arg"
-	  prev=
-	  continue
-	  ;;
-	release)
-	  release="-$arg"
-	  prev=
-	  continue
-	  ;;
-	objectlist)
-	  if test -f "$arg"; then
-	    save_arg=$arg
-	    moreargs=
-	    for fil in `cat $save_arg`
-	    do
-#	      moreargs="$moreargs $fil"
-	      arg=$fil
-	      # A libtool-controlled object.
-
-	      # Check to see that this really is a libtool object.
-	      if (${SED} -e '2q' $arg | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
-		pic_object=
-		non_pic_object=
-
-		# Read the .lo file
-		# If there is no directory component, then add one.
-		case $arg in
-		*/* | *\\*) . $arg ;;
-		*) . ./$arg ;;
-		esac
-
-		if test -z "$pic_object" || \
-		   test -z "$non_pic_object" ||
-		   test "$pic_object" = none && \
-		   test "$non_pic_object" = none; then
-		  $echo "$modename: cannot find name of object for \`$arg'" 1>&2
-		  exit $EXIT_FAILURE
-		fi
-
-		# Extract subdirectory from the argument.
-		xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'`
-		if test "X$xdir" = "X$arg"; then
-		  xdir=
-		else
-		  xdir="$xdir/"
-		fi
-
-		if test "$pic_object" != none; then
-		  # Prepend the subdirectory the object is found in.
-		  pic_object="$xdir$pic_object"
-
-		  if test "$prev" = dlfiles; then
-		    if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
-		      dlfiles="$dlfiles $pic_object"
-		      prev=
-		      continue
-		    else
-		      # If libtool objects are unsupported, then we need to preload.
-		      prev=dlprefiles
-		    fi
-		  fi
-
-		  # CHECK ME:  I think I busted this.  -Ossama
-		  if test "$prev" = dlprefiles; then
-		    # Preload the old-style object.
-		    dlprefiles="$dlprefiles $pic_object"
-		    prev=
-		  fi
-
-		  # A PIC object.
-		  libobjs="$libobjs $pic_object"
-		  arg="$pic_object"
-		fi
-
-		# Non-PIC object.
-		if test "$non_pic_object" != none; then
-		  # Prepend the subdirectory the object is found in.
-		  non_pic_object="$xdir$non_pic_object"
-
-		  # A standard non-PIC object
-		  non_pic_objects="$non_pic_objects $non_pic_object"
-		  if test -z "$pic_object" || test "$pic_object" = none ; then
-		    arg="$non_pic_object"
-		  fi
-		else
-		  # If the PIC object exists, use it instead.
-		  # $xdir was prepended to $pic_object above.
-		  non_pic_object="$pic_object"
-		  non_pic_objects="$non_pic_objects $non_pic_object"
-		fi
-	      else
-		# Only an error if not doing a dry-run.
-		if test -z "$run"; then
-		  $echo "$modename: \`$arg' is not a valid libtool object" 1>&2
-		  exit $EXIT_FAILURE
-		else
-		  # Dry-run case.
-
-		  # Extract subdirectory from the argument.
-		  xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'`
-		  if test "X$xdir" = "X$arg"; then
-		    xdir=
-		  else
-		    xdir="$xdir/"
-		  fi
-
-		  pic_object=`$echo "X${xdir}${objdir}/${arg}" | $Xsed -e "$lo2o"`
-		  non_pic_object=`$echo "X${xdir}${arg}" | $Xsed -e "$lo2o"`
-		  libobjs="$libobjs $pic_object"
-		  non_pic_objects="$non_pic_objects $non_pic_object"
-		fi
-	      fi
-	    done
-	  else
-	    $echo "$modename: link input file \`$save_arg' does not exist"
-	    exit $EXIT_FAILURE
-	  fi
-	  arg=$save_arg
-	  prev=
-	  continue
-	  ;;
-	rpath | xrpath)
-	  # We need an absolute path.
-	  case $arg in
-	  [\\/]* | [A-Za-z]:[\\/]*) ;;
-	  *)
-	    $echo "$modename: only absolute run-paths are allowed" 1>&2
-	    exit $EXIT_FAILURE
-	    ;;
-	  esac
-	  if test "$prev" = rpath; then
-	    case "$rpath " in
-	    *" $arg "*) ;;
-	    *) rpath="$rpath $arg" ;;
-	    esac
-	  else
-	    case "$xrpath " in
-	    *" $arg "*) ;;
-	    *) xrpath="$xrpath $arg" ;;
-	    esac
-	  fi
-	  prev=
-	  continue
-	  ;;
-	xcompiler)
-	  compiler_flags="$compiler_flags $qarg"
-	  prev=
-	  compile_command="$compile_command $qarg"
-	  finalize_command="$finalize_command $qarg"
-	  continue
-	  ;;
-	xlinker)
-	  linker_flags="$linker_flags $qarg"
-	  compiler_flags="$compiler_flags $wl$qarg"
-	  prev=
-	  compile_command="$compile_command $wl$qarg"
-	  finalize_command="$finalize_command $wl$qarg"
-	  continue
-	  ;;
-	xcclinker)
-	  linker_flags="$linker_flags $qarg"
-	  compiler_flags="$compiler_flags $qarg"
-	  prev=
-	  compile_command="$compile_command $qarg"
-	  finalize_command="$finalize_command $qarg"
-	  continue
-	  ;;
-	shrext)
-  	  shrext_cmds="$arg"
-	  prev=
-	  continue
-	  ;;
-	darwin_framework|darwin_framework_skip)
-	  test "$prev" = "darwin_framework" && compiler_flags="$compiler_flags $arg"
-	  compile_command="$compile_command $arg"
-	  finalize_command="$finalize_command $arg"
-	  prev=
-	  continue
-	  ;;
-	*)
-	  eval "$prev=\"\$arg\""
-	  prev=
-	  continue
-	  ;;
-	esac
-      fi # test -n "$prev"
-
-      prevarg="$arg"
-
-      case $arg in
-      -all-static)
-	if test -n "$link_static_flag"; then
-	  compile_command="$compile_command $link_static_flag"
-	  finalize_command="$finalize_command $link_static_flag"
-	fi
-	continue
-	;;
-
-      -allow-undefined)
-	# FIXME: remove this flag sometime in the future.
-	$echo "$modename: \`-allow-undefined' is deprecated because it is the default" 1>&2
-	continue
-	;;
-
-      -avoid-version)
-	avoid_version=yes
-	continue
-	;;
-
-      -dlopen)
-	prev=dlfiles
-	continue
-	;;
-
-      -dlpreopen)
-	prev=dlprefiles
-	continue
-	;;
-
-      -export-dynamic)
-	export_dynamic=yes
-	continue
-	;;
-
-      -export-symbols | -export-symbols-regex)
-	if test -n "$export_symbols" || test -n "$export_symbols_regex"; then
-	  $echo "$modename: more than one -exported-symbols argument is not allowed"
-	  exit $EXIT_FAILURE
-	fi
-	if test "X$arg" = "X-export-symbols"; then
-	  prev=expsyms
-	else
-	  prev=expsyms_regex
-	fi
-	continue
-	;;
-
-      -framework|-arch|-isysroot)
-	case " $CC " in
-	  *" ${arg} ${1} "* | *" ${arg}	${1} "*) 
-		prev=darwin_framework_skip ;;
-	  *) compiler_flags="$compiler_flags $arg"
-	     prev=darwin_framework ;;
-	esac
-	compile_command="$compile_command $arg"
-	finalize_command="$finalize_command $arg"
-	continue
-	;;
-
-      -inst-prefix-dir)
-	prev=inst_prefix
-	continue
-	;;
-
-      # The native IRIX linker understands -LANG:*, -LIST:* and -LNO:*
-      # so, if we see these flags be careful not to treat them like -L
-      -L[A-Z][A-Z]*:*)
-	case $with_gcc/$host in
-	no/*-*-irix* | /*-*-irix*)
-	  compile_command="$compile_command $arg"
-	  finalize_command="$finalize_command $arg"
-	  ;;
-	esac
-	continue
-	;;
-
-      -L*)
-	dir=`$echo "X$arg" | $Xsed -e 's/^-L//'`
-	# We need an absolute path.
-	case $dir in
-	[\\/]* | [A-Za-z]:[\\/]*) ;;
-	*)
-	  absdir=`cd "$dir" && pwd`
-	  if test -z "$absdir"; then
-	    $echo "$modename: cannot determine absolute directory name of \`$dir'" 1>&2
-	    absdir="$dir"
-	    notinst_path="$notinst_path $dir"
-	  fi
-	  dir="$absdir"
-	  ;;
-	esac
-	case "$deplibs " in
-	*" -L$dir "*) ;;
-	*)
-	  deplibs="$deplibs -L$dir"
-	  lib_search_path="$lib_search_path $dir"
-	  ;;
-	esac
-	case $host in
-	*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
-	  testbindir=`$echo "X$dir" | $Xsed -e 's*/lib$*/bin*'`
-	  case :$dllsearchpath: in
-	  *":$dir:"*) ;;
-	  *) dllsearchpath="$dllsearchpath:$dir";;
-	  esac
-	  case :$dllsearchpath: in
-	  *":$testbindir:"*) ;;
-	  *) dllsearchpath="$dllsearchpath:$testbindir";;
-	  esac
-	  ;;
-	esac
-	continue
-	;;
-
-      -l*)
-	if test "X$arg" = "X-lc" || test "X$arg" = "X-lm"; then
-	  case $host in
-	  *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos*)
-	    # These systems don't actually have a C or math library (as such)
-	    continue
-	    ;;
-	  *-*-os2*)
-	    # These systems don't actually have a C library (as such)
-	    test "X$arg" = "X-lc" && continue
-	    ;;
-	  *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
-	    # Do not include libc due to us having libc/libc_r.
-	    test "X$arg" = "X-lc" && continue
-	    ;;
-	  *-*-rhapsody* | *-*-darwin1.[012])
-	    # Rhapsody C and math libraries are in the System framework
-	    deplibs="$deplibs -framework System"
-	    continue
-	    ;;
-	  *-*-sco3.2v5* | *-*-sco5v6*)
-	    # Causes problems with __ctype
-	    test "X$arg" = "X-lc" && continue
-	    ;;
-	  *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*)
-	    # Compiler inserts libc in the correct place for threads to work
-	    test "X$arg" = "X-lc" && continue
-	    ;;
-	  esac
-	elif test "X$arg" = "X-lc_r"; then
-	 case $host in
-	 *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
-	   # Do not include libc_r directly, use -pthread flag.
-	   continue
-	   ;;
-	 esac
-	fi
-	deplibs="$deplibs $arg"
-	continue
-	;;
-
-      # Tru64 UNIX uses -model [arg] to determine the layout of C++
-      # classes, name mangling, and exception handling.
-      -model)
-	compile_command="$compile_command $arg"
-	compiler_flags="$compiler_flags $arg"
-	finalize_command="$finalize_command $arg"
-	prev=xcompiler
-	continue
-	;;
-
-     -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe|-threads)
-	compiler_flags="$compiler_flags $arg"
-	compile_command="$compile_command $arg"
-	finalize_command="$finalize_command $arg"
-	continue
-	;;
-
-      -module)
-	module=yes
-	continue
-	;;
-
-      # -64, -mips[0-9] enable 64-bit mode on the SGI compiler
-      # -r[0-9][0-9]* specifies the processor on the SGI compiler
-      # -xarch=*, -xtarget=* enable 64-bit mode on the Sun compiler
-      # +DA*, +DD* enable 64-bit mode on the HP compiler
-      # -q* pass through compiler args for the IBM compiler
-      # -m* pass through architecture-specific compiler args for GCC
-      # -m*, -t[45]*, -txscale* pass through architecture-specific
-      # compiler args for GCC
-      # -p, -pg, --coverage, -fprofile-* pass through profiling flag for GCC
-      # -F/path gives path to uninstalled frameworks, gcc on darwin
-      # @file GCC response files
-      -64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*| \
-      -t[45]*|-txscale*|-p|-pg|--coverage|-fprofile-*|-F*|@*)
-
-	# Unknown arguments in both finalize_command and compile_command need
-	# to be aesthetically quoted because they are evaled later.
-	arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
-	case $arg in
-	*[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
-	  arg="\"$arg\""
-	  ;;
-	esac
-        compile_command="$compile_command $arg"
-        finalize_command="$finalize_command $arg"
-        compiler_flags="$compiler_flags $arg"
-        continue
-        ;;
-
-      -shrext)
-	prev=shrext
-	continue
-	;;
-
-      -no-fast-install)
-	fast_install=no
-	continue
-	;;
-
-      -no-install)
-	case $host in
-	*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
-	  # The PATH hackery in wrapper scripts is required on Windows
-	  # in order for the loader to find any dlls it needs.
-	  $echo "$modename: warning: \`-no-install' is ignored for $host" 1>&2
-	  $echo "$modename: warning: assuming \`-no-fast-install' instead" 1>&2
-	  fast_install=no
-	  ;;
-	*) no_install=yes ;;
-	esac
-	continue
-	;;
-
-      -no-undefined)
-	allow_undefined=no
-	continue
-	;;
-
-      -objectlist)
-	prev=objectlist
-	continue
-	;;
-
-      -o) prev=output ;;
-
-      -precious-files-regex)
-	prev=precious_regex
-	continue
-	;;
-
-      -release)
-	prev=release
-	continue
-	;;
-
-      -rpath)
-	prev=rpath
-	continue
-	;;
-
-      -R)
-	prev=xrpath
-	continue
-	;;
-
-      -R*)
-	dir=`$echo "X$arg" | $Xsed -e 's/^-R//'`
-	# We need an absolute path.
-	case $dir in
-	[\\/]* | [A-Za-z]:[\\/]*) ;;
-	*)
-	  $echo "$modename: only absolute run-paths are allowed" 1>&2
-	  exit $EXIT_FAILURE
-	  ;;
-	esac
-	case "$xrpath " in
-	*" $dir "*) ;;
-	*) xrpath="$xrpath $dir" ;;
-	esac
-	continue
-	;;
-
-      -static | -static-libtool-libs)
-	# The effects of -static are defined in a previous loop.
-	# We used to do the same as -all-static on platforms that
-	# didn't have a PIC flag, but the assumption that the effects
-	# would be equivalent was wrong.  It would break on at least
-	# Digital Unix and AIX.
-	continue
-	;;
-
-      -thread-safe)
-	thread_safe=yes
-	continue
-	;;
-
-      -version-info)
-	prev=vinfo
-	continue
-	;;
-      -version-number)
-	prev=vinfo
-	vinfo_number=yes
-	continue
-	;;
-
-      -Wc,*)
-	args=`$echo "X$arg" | $Xsed -e "$sed_quote_subst" -e 's/^-Wc,//'`
-	arg=
-	save_ifs="$IFS"; IFS=','
-	for flag in $args; do
-	  IFS="$save_ifs"
-	  case $flag in
-	    *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
-	    flag="\"$flag\""
-	    ;;
-	  esac
-	  arg="$arg $wl$flag"
-	  compiler_flags="$compiler_flags $flag"
-	done
-	IFS="$save_ifs"
-	arg=`$echo "X$arg" | $Xsed -e "s/^ //"`
-	;;
-
-      -Wl,*)
-	args=`$echo "X$arg" | $Xsed -e "$sed_quote_subst" -e 's/^-Wl,//'`
-	arg=
-	save_ifs="$IFS"; IFS=','
-	for flag in $args; do
-	  IFS="$save_ifs"
-	  case $flag in
-	    *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
-	    flag="\"$flag\""
-	    ;;
-	  esac
-	  arg="$arg $wl$flag"
-	  compiler_flags="$compiler_flags $wl$flag"
-	  linker_flags="$linker_flags $flag"
-	done
-	IFS="$save_ifs"
-	arg=`$echo "X$arg" | $Xsed -e "s/^ //"`
-	;;
-
-      -Xcompiler)
-	prev=xcompiler
-	continue
-	;;
-
-      -Xlinker)
-	prev=xlinker
-	continue
-	;;
-
-      -XCClinker)
-	prev=xcclinker
-	continue
-	;;
-
-      # Some other compiler flag.
-      -* | +*)
-	# Unknown arguments in both finalize_command and compile_command need
-	# to be aesthetically quoted because they are evaled later.
-	arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
-	case $arg in
-	*[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
-	  arg="\"$arg\""
-	  ;;
-	esac
-	;;
-
-      *.$objext)
-	# A standard object.
-	objs="$objs $arg"
-	;;
-
-      *.lo)
-	# A libtool-controlled object.
-
-	# Check to see that this really is a libtool object.
-	if (${SED} -e '2q' $arg | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
-	  pic_object=
-	  non_pic_object=
-
-	  # Read the .lo file
-	  # If there is no directory component, then add one.
-	  case $arg in
-	  */* | *\\*) . $arg ;;
-	  *) . ./$arg ;;
-	  esac
-
-	  if test -z "$pic_object" || \
-	     test -z "$non_pic_object" ||
-	     test "$pic_object" = none && \
-	     test "$non_pic_object" = none; then
-	    $echo "$modename: cannot find name of object for \`$arg'" 1>&2
-	    exit $EXIT_FAILURE
-	  fi
-
-	  # Extract subdirectory from the argument.
-	  xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'`
-	  if test "X$xdir" = "X$arg"; then
-	    xdir=
- 	  else
-	    xdir="$xdir/"
-	  fi
-
-	  if test "$pic_object" != none; then
-	    # Prepend the subdirectory the object is found in.
-	    pic_object="$xdir$pic_object"
-
-	    if test "$prev" = dlfiles; then
-	      if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
-		dlfiles="$dlfiles $pic_object"
-		prev=
-		continue
-	      else
-		# If libtool objects are unsupported, then we need to preload.
-		prev=dlprefiles
-	      fi
-	    fi
-
-	    # CHECK ME:  I think I busted this.  -Ossama
-	    if test "$prev" = dlprefiles; then
-	      # Preload the old-style object.
-	      dlprefiles="$dlprefiles $pic_object"
-	      prev=
-	    fi
-
-	    # A PIC object.
-	    libobjs="$libobjs $pic_object"
-	    arg="$pic_object"
-	  fi
-
-	  # Non-PIC object.
-	  if test "$non_pic_object" != none; then
-	    # Prepend the subdirectory the object is found in.
-	    non_pic_object="$xdir$non_pic_object"
-
-	    # A standard non-PIC object
-	    non_pic_objects="$non_pic_objects $non_pic_object"
-	    if test -z "$pic_object" || test "$pic_object" = none ; then
-	      arg="$non_pic_object"
-	    fi
-	  else
-	    # If the PIC object exists, use it instead.
-	    # $xdir was prepended to $pic_object above.
-	    non_pic_object="$pic_object"
-	    non_pic_objects="$non_pic_objects $non_pic_object"
-	  fi
-	else
-	  # Only an error if not doing a dry-run.
-	  if test -z "$run"; then
-	    $echo "$modename: \`$arg' is not a valid libtool object" 1>&2
-	    exit $EXIT_FAILURE
-	  else
-	    # Dry-run case.
-
-	    # Extract subdirectory from the argument.
-	    xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'`
-	    if test "X$xdir" = "X$arg"; then
-	      xdir=
-	    else
-	      xdir="$xdir/"
-	    fi
-
-	    pic_object=`$echo "X${xdir}${objdir}/${arg}" | $Xsed -e "$lo2o"`
-	    non_pic_object=`$echo "X${xdir}${arg}" | $Xsed -e "$lo2o"`
-	    libobjs="$libobjs $pic_object"
-	    non_pic_objects="$non_pic_objects $non_pic_object"
-	  fi
-	fi
-	;;
-
-      *.$libext)
-	# An archive.
-	deplibs="$deplibs $arg"
-	old_deplibs="$old_deplibs $arg"
-	continue
-	;;
-
-      *.la)
-	# A libtool-controlled library.
-
-	if test "$prev" = dlfiles; then
-	  # This library was specified with -dlopen.
-	  dlfiles="$dlfiles $arg"
-	  prev=
-	elif test "$prev" = dlprefiles; then
-	  # The library was specified with -dlpreopen.
-	  dlprefiles="$dlprefiles $arg"
-	  prev=
-	else
-	  deplibs="$deplibs $arg"
-	fi
-	continue
-	;;
-
-      # Some other compiler argument.
-      *)
-	# Unknown arguments in both finalize_command and compile_command need
-	# to be aesthetically quoted because they are evaled later.
-	arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
-	case $arg in
-	*[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
-	  arg="\"$arg\""
-	  ;;
-	esac
-	;;
-      esac # arg
-
-      # Now actually substitute the argument into the commands.
-      if test -n "$arg"; then
-	compile_command="$compile_command $arg"
-	finalize_command="$finalize_command $arg"
-      fi
-    done # argument parsing loop
-
-    if test -n "$prev"; then
-      $echo "$modename: the \`$prevarg' option requires an argument" 1>&2
-      $echo "$help" 1>&2
-      exit $EXIT_FAILURE
-    fi
-
-    if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then
-      eval arg=\"$export_dynamic_flag_spec\"
-      compile_command="$compile_command $arg"
-      finalize_command="$finalize_command $arg"
-    fi
-
-    oldlibs=
-    # calculate the name of the file, without its directory
-    outputname=`$echo "X$output" | $Xsed -e 's%^.*/%%'`
-    libobjs_save="$libobjs"
-
-    if test -n "$shlibpath_var"; then
-      # get the directories listed in $shlibpath_var
-      eval shlib_search_path=\`\$echo \"X\${$shlibpath_var}\" \| \$Xsed -e \'s/:/ /g\'\`
-    else
-      shlib_search_path=
-    fi
-    eval sys_lib_search_path=\"$sys_lib_search_path_spec\"
-    eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\"
-
-    output_objdir=`$echo "X$output" | $Xsed -e 's%/[^/]*$%%'`
-    if test "X$output_objdir" = "X$output"; then
-      output_objdir="$objdir"
-    else
-      output_objdir="$output_objdir/$objdir"
-    fi
-    # Create the object directory.
-    if test ! -d "$output_objdir"; then
-      $show "$mkdir $output_objdir"
-      $run $mkdir $output_objdir
-      exit_status=$?
-      if test "$exit_status" -ne 0 && test ! -d "$output_objdir"; then
-	exit $exit_status
-      fi
-    fi
-
-    # Determine the type of output
-    case $output in
-    "")
-      $echo "$modename: you must specify an output file" 1>&2
-      $echo "$help" 1>&2
-      exit $EXIT_FAILURE
-      ;;
-    *.$libext) linkmode=oldlib ;;
-    *.lo | *.$objext) linkmode=obj ;;
-    *.la) linkmode=lib ;;
-    *) linkmode=prog ;; # Anything else should be a program.
-    esac
-
-    case $host in
-    *cygwin* | *mingw* | *pw32*)
-      # don't eliminate duplications in $postdeps and $predeps
-      duplicate_compiler_generated_deps=yes
-      ;;
-    *)
-      duplicate_compiler_generated_deps=$duplicate_deps
-      ;;
-    esac
-    specialdeplibs=
-
-    libs=
-    # Find all interdependent deplibs by searching for libraries
-    # that are linked more than once (e.g. -la -lb -la)
-    for deplib in $deplibs; do
-      if test "X$duplicate_deps" = "Xyes" ; then
-	case "$libs " in
-	*" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
-	esac
-      fi
-      libs="$libs $deplib"
-    done
-
-    if test "$linkmode" = lib; then
-      libs="$predeps $libs $compiler_lib_search_path $postdeps"
-
-      # Compute libraries that are listed more than once in $predeps
-      # $postdeps and mark them as special (i.e., whose duplicates are
-      # not to be eliminated).
-      pre_post_deps=
-      if test "X$duplicate_compiler_generated_deps" = "Xyes" ; then
-	for pre_post_dep in $predeps $postdeps; do
-	  case "$pre_post_deps " in
-	  *" $pre_post_dep "*) specialdeplibs="$specialdeplibs $pre_post_deps" ;;
-	  esac
-	  pre_post_deps="$pre_post_deps $pre_post_dep"
-	done
-      fi
-      pre_post_deps=
-    fi
-
-    deplibs=
-    newdependency_libs=
-    newlib_search_path=
-    need_relink=no # whether we're linking any uninstalled libtool libraries
-    notinst_deplibs= # not-installed libtool libraries
-    case $linkmode in
-    lib)
-	passes="conv link"
-	for file in $dlfiles $dlprefiles; do
-	  case $file in
-	  *.la) ;;
-	  *)
-	    $echo "$modename: libraries can \`-dlopen' only libtool libraries: $file" 1>&2
-	    exit $EXIT_FAILURE
-	    ;;
-	  esac
-	done
-	;;
-    prog)
-	compile_deplibs=
-	finalize_deplibs=
-	alldeplibs=no
-	newdlfiles=
-	newdlprefiles=
-	passes="conv scan dlopen dlpreopen link"
-	;;
-    *)  passes="conv"
-	;;
-    esac
-    for pass in $passes; do
-      if test "$linkmode,$pass" = "lib,link" ||
-	 test "$linkmode,$pass" = "prog,scan"; then
-	libs="$deplibs"
-	deplibs=
-      fi
-      if test "$linkmode" = prog; then
-	case $pass in
-	dlopen) libs="$dlfiles" ;;
-	dlpreopen) libs="$dlprefiles" ;;
-	link) libs="$deplibs %DEPLIBS% $dependency_libs" ;;
-	esac
-      fi
-      if test "$pass" = dlopen; then
-	# Collect dlpreopened libraries
-	save_deplibs="$deplibs"
-	deplibs=
-      fi
-      for deplib in $libs; do
-	lib=
-	found=no
-	case $deplib in
-	-mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe|-threads)
-	  if test "$linkmode,$pass" = "prog,link"; then
-	    compile_deplibs="$deplib $compile_deplibs"
-	    finalize_deplibs="$deplib $finalize_deplibs"
-	  else
-	    compiler_flags="$compiler_flags $deplib"
-	  fi
-	  continue
-	  ;;
-	-l*)
-	  if test "$linkmode" != lib && test "$linkmode" != prog; then
-	    $echo "$modename: warning: \`-l' is ignored for archives/objects" 1>&2
-	    continue
-	  fi
-	  name=`$echo "X$deplib" | $Xsed -e 's/^-l//'`
-	  for searchdir in $newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path; do
-	    for search_ext in .la $std_shrext .so .a; do
-	      # Search the libtool library
-	      lib="$searchdir/lib${name}${search_ext}"
-	      if test -f "$lib"; then
-		if test "$search_ext" = ".la"; then
-		  found=yes
-		else
-		  found=no
-		fi
-		break 2
-	      fi
-	    done
-	  done
-	  if test "$found" != yes; then
-	    # deplib doesn't seem to be a libtool library
-	    if test "$linkmode,$pass" = "prog,link"; then
-	      compile_deplibs="$deplib $compile_deplibs"
-	      finalize_deplibs="$deplib $finalize_deplibs"
-	    else
-	      deplibs="$deplib $deplibs"
-	      test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs"
-	    fi
-	    continue
-	  else # deplib is a libtool library
-	    # If $allow_libtool_libs_with_static_runtimes && $deplib is a stdlib,
-	    # We need to do some special things here, and not later.
-	    if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
-	      case " $predeps $postdeps " in
-	      *" $deplib "*)
-		if (${SED} -e '2q' $lib |
-                    grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
-		  library_names=
-		  old_library=
-		  case $lib in
-		  */* | *\\*) . $lib ;;
-		  *) . ./$lib ;;
-		  esac
-		  for l in $old_library $library_names; do
-		    ll="$l"
-		  done
-		  if test "X$ll" = "X$old_library" ; then # only static version available
-		    found=no
-		    ladir=`$echo "X$lib" | $Xsed -e 's%/[^/]*$%%'`
-		    test "X$ladir" = "X$lib" && ladir="."
-		    lib=$ladir/$old_library
-		    if test "$linkmode,$pass" = "prog,link"; then
-		      compile_deplibs="$deplib $compile_deplibs"
-		      finalize_deplibs="$deplib $finalize_deplibs"
-		    else
-		      deplibs="$deplib $deplibs"
-		      test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs"
-		    fi
-		    continue
-		  fi
-		fi
-	        ;;
-	      *) ;;
-	      esac
-	    fi
-	  fi
-	  ;; # -l
-	-L*)
-	  case $linkmode in
-	  lib)
-	    deplibs="$deplib $deplibs"
-	    test "$pass" = conv && continue
-	    newdependency_libs="$deplib $newdependency_libs"
-	    newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`
-	    ;;
-	  prog)
-	    if test "$pass" = conv; then
-	      deplibs="$deplib $deplibs"
-	      continue
-	    fi
-	    if test "$pass" = scan; then
-	      deplibs="$deplib $deplibs"
-	    else
-	      compile_deplibs="$deplib $compile_deplibs"
-	      finalize_deplibs="$deplib $finalize_deplibs"
-	    fi
-	    newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`
-	    ;;
-	  *)
-	    $echo "$modename: warning: \`-L' is ignored for archives/objects" 1>&2
-	    ;;
-	  esac # linkmode
-	  continue
-	  ;; # -L
-	-R*)
-	  if test "$pass" = link; then
-	    dir=`$echo "X$deplib" | $Xsed -e 's/^-R//'`
-	    # Make sure the xrpath contains only unique directories.
-	    case "$xrpath " in
-	    *" $dir "*) ;;
-	    *) xrpath="$xrpath $dir" ;;
-	    esac
-	  fi
-	  deplibs="$deplib $deplibs"
-	  continue
-	  ;;
-	*.la) lib="$deplib" ;;
-	*.$libext)
-	  if test "$pass" = conv; then
-	    deplibs="$deplib $deplibs"
-	    continue
-	  fi
-	  case $linkmode in
-	  lib)
-	    valid_a_lib=no
-	    case $deplibs_check_method in
-	      match_pattern*)
-		set dummy $deplibs_check_method
-	        match_pattern_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"`
-		if eval $echo \"$deplib\" 2>/dev/null \
-		    | $SED 10q \
-		    | $EGREP "$match_pattern_regex" > /dev/null; then
-		  valid_a_lib=yes
-		fi
-		;;
-	      pass_all)
-		valid_a_lib=yes
-		;;
-            esac
-	    if test "$valid_a_lib" != yes; then
-	      $echo
-	      $echo "*** Warning: Trying to link with static lib archive $deplib."
-	      $echo "*** I have the capability to make that library automatically link in when"
-	      $echo "*** you link to this library.  But I can only do this if you have a"
-	      $echo "*** shared version of the library, which you do not appear to have"
-	      $echo "*** because the file extensions .$libext of this argument makes me believe"
-	      $echo "*** that it is just a static archive that I should not used here."
-	    else
-	      $echo
-	      $echo "*** Warning: Linking the shared library $output against the"
-	      $echo "*** static library $deplib is not portable!"
-	      deplibs="$deplib $deplibs"
-	    fi
-	    continue
-	    ;;
-	  prog)
-	    if test "$pass" != link; then
-	      deplibs="$deplib $deplibs"
-	    else
-	      compile_deplibs="$deplib $compile_deplibs"
-	      finalize_deplibs="$deplib $finalize_deplibs"
-	    fi
-	    continue
-	    ;;
-	  esac # linkmode
-	  ;; # *.$libext
-	*.lo | *.$objext)
-	  if test "$pass" = conv; then
-	    deplibs="$deplib $deplibs"
-	  elif test "$linkmode" = prog; then
-	    if test "$pass" = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then
-	      # If there is no dlopen support or we're linking statically,
-	      # we need to preload.
-	      newdlprefiles="$newdlprefiles $deplib"
-	      compile_deplibs="$deplib $compile_deplibs"
-	      finalize_deplibs="$deplib $finalize_deplibs"
-	    else
-	      newdlfiles="$newdlfiles $deplib"
-	    fi
-	  fi
-	  continue
-	  ;;
-	%DEPLIBS%)
-	  alldeplibs=yes
-	  continue
-	  ;;
-	esac # case $deplib
-	if test "$found" = yes || test -f "$lib"; then :
-	else
-	  $echo "$modename: cannot find the library \`$lib' or unhandled argument \`$deplib'" 1>&2
-	  exit $EXIT_FAILURE
-	fi
-
-	# Check to see that this really is a libtool archive.
-	if (${SED} -e '2q' $lib | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
-	else
-	  $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
-	  exit $EXIT_FAILURE
-	fi
-
-	ladir=`$echo "X$lib" | $Xsed -e 's%/[^/]*$%%'`
-	test "X$ladir" = "X$lib" && ladir="."
-
-	dlname=
-	dlopen=
-	dlpreopen=
-	libdir=
-	library_names=
-	old_library=
-	# If the library was installed with an old release of libtool,
-	# it will not redefine variables installed, or shouldnotlink
-	installed=yes
-	shouldnotlink=no
-	avoidtemprpath=
-
-
-	# Read the .la file
-	case $lib in
-	*/* | *\\*) . $lib ;;
-	*) . ./$lib ;;
-	esac
-
-	if test "$linkmode,$pass" = "lib,link" ||
-	   test "$linkmode,$pass" = "prog,scan" ||
-	   { test "$linkmode" != prog && test "$linkmode" != lib; }; then
-	  test -n "$dlopen" && dlfiles="$dlfiles $dlopen"
-	  test -n "$dlpreopen" && dlprefiles="$dlprefiles $dlpreopen"
-	fi
-
-	if test "$pass" = conv; then
-	  # Only check for convenience libraries
-	  deplibs="$lib $deplibs"
-	  if test -z "$libdir"; then
-	    if test -z "$old_library"; then
-	      $echo "$modename: cannot find name of link library for \`$lib'" 1>&2
-	      exit $EXIT_FAILURE
-	    fi
-	    # It is a libtool convenience library, so add in its objects.
-	    convenience="$convenience $ladir/$objdir/$old_library"
-	    old_convenience="$old_convenience $ladir/$objdir/$old_library"
-	    tmp_libs=
-	    for deplib in $dependency_libs; do
-	      deplibs="$deplib $deplibs"
-              if test "X$duplicate_deps" = "Xyes" ; then
-	        case "$tmp_libs " in
-	        *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
-	        esac
-              fi
-	      tmp_libs="$tmp_libs $deplib"
-	    done
-	  elif test "$linkmode" != prog && test "$linkmode" != lib; then
-	    $echo "$modename: \`$lib' is not a convenience library" 1>&2
-	    exit $EXIT_FAILURE
-	  fi
-	  continue
-	fi # $pass = conv
-
-
-	# Get the name of the library we link against.
-	linklib=
-	for l in $old_library $library_names; do
-	  linklib="$l"
-	done
-	if test -z "$linklib"; then
-	  $echo "$modename: cannot find name of link library for \`$lib'" 1>&2
-	  exit $EXIT_FAILURE
-	fi
-
-	# This library was specified with -dlopen.
-	if test "$pass" = dlopen; then
-	  if test -z "$libdir"; then
-	    $echo "$modename: cannot -dlopen a convenience library: \`$lib'" 1>&2
-	    exit $EXIT_FAILURE
-	  fi
-	  if test -z "$dlname" ||
-	     test "$dlopen_support" != yes ||
-	     test "$build_libtool_libs" = no; then
-	    # If there is no dlname, no dlopen support or we're linking
-	    # statically, we need to preload.  We also need to preload any
-	    # dependent libraries so libltdl's deplib preloader doesn't
-	    # bomb out in the load deplibs phase.
-	    dlprefiles="$dlprefiles $lib $dependency_libs"
-	  else
-	    newdlfiles="$newdlfiles $lib"
-	  fi
-	  continue
-	fi # $pass = dlopen
-
-	# We need an absolute path.
-	case $ladir in
-	[\\/]* | [A-Za-z]:[\\/]*) abs_ladir="$ladir" ;;
-	*)
-	  abs_ladir=`cd "$ladir" && pwd`
-	  if test -z "$abs_ladir"; then
-	    $echo "$modename: warning: cannot determine absolute directory name of \`$ladir'" 1>&2
-	    $echo "$modename: passing it literally to the linker, although it might fail" 1>&2
-	    abs_ladir="$ladir"
-	  fi
-	  ;;
-	esac
-	laname=`$echo "X$lib" | $Xsed -e 's%^.*/%%'`
-
-	# Find the relevant object directory and library name.
-	if test "X$installed" = Xyes; then
-	  if test ! -f "$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then
-	    $echo "$modename: warning: library \`$lib' was moved." 1>&2
-	    dir="$ladir"
-	    absdir="$abs_ladir"
-	    libdir="$abs_ladir"
-	  else
-	    dir="$libdir"
-	    absdir="$libdir"
-	  fi
-	  test "X$hardcode_automatic" = Xyes && avoidtemprpath=yes
-	else
-	  if test ! -f "$ladir/$objdir/$linklib" && test -f "$abs_ladir/$linklib"; then
-	    dir="$ladir"
-	    absdir="$abs_ladir"
-	    # Remove this search path later
-	    notinst_path="$notinst_path $abs_ladir"
-	  else
-	    dir="$ladir/$objdir"
-	    absdir="$abs_ladir/$objdir"
-	    # Remove this search path later
-	    notinst_path="$notinst_path $abs_ladir"
-	  fi
-	fi # $installed = yes
-	name=`$echo "X$laname" | $Xsed -e 's/\.la$//' -e 's/^lib//'`
-
-	# This library was specified with -dlpreopen.
-	if test "$pass" = dlpreopen; then
-	  if test -z "$libdir"; then
-	    $echo "$modename: cannot -dlpreopen a convenience library: \`$lib'" 1>&2
-	    exit $EXIT_FAILURE
-	  fi
-	  # Prefer using a static library (so that no silly _DYNAMIC symbols
-	  # are required to link).
-	  if test -n "$old_library"; then
-	    newdlprefiles="$newdlprefiles $dir/$old_library"
-	  # Otherwise, use the dlname, so that lt_dlopen finds it.
-	  elif test -n "$dlname"; then
-	    newdlprefiles="$newdlprefiles $dir/$dlname"
-	  else
-	    newdlprefiles="$newdlprefiles $dir/$linklib"
-	  fi
-	fi # $pass = dlpreopen
-
-	if test -z "$libdir"; then
-	  # Link the convenience library
-	  if test "$linkmode" = lib; then
-	    deplibs="$dir/$old_library $deplibs"
-	  elif test "$linkmode,$pass" = "prog,link"; then
-	    compile_deplibs="$dir/$old_library $compile_deplibs"
-	    finalize_deplibs="$dir/$old_library $finalize_deplibs"
-	  else
-	    deplibs="$lib $deplibs" # used for prog,scan pass
-	  fi
-	  continue
-	fi
-
-
-	if test "$linkmode" = prog && test "$pass" != link; then
-	  newlib_search_path="$newlib_search_path $ladir"
-	  deplibs="$lib $deplibs"
-
-	  linkalldeplibs=no
-	  if test "$link_all_deplibs" != no || test -z "$library_names" ||
-	     test "$build_libtool_libs" = no; then
-	    linkalldeplibs=yes
-	  fi
-
-	  tmp_libs=
-	  for deplib in $dependency_libs; do
-	    case $deplib in
-	    -L*) newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`;; ### testsuite: skip nested quoting test
-	    esac
-	    # Need to link against all dependency_libs?
-	    if test "$linkalldeplibs" = yes; then
-	      deplibs="$deplib $deplibs"
-	    else
-	      # Need to hardcode shared library paths
-	      # or/and link against static libraries
-	      newdependency_libs="$deplib $newdependency_libs"
-	    fi
-	    if test "X$duplicate_deps" = "Xyes" ; then
-	      case "$tmp_libs " in
-	      *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
-	      esac
-	    fi
-	    tmp_libs="$tmp_libs $deplib"
-	  done # for deplib
-	  continue
-	fi # $linkmode = prog...
-
-	if test "$linkmode,$pass" = "prog,link"; then
-	  if test -n "$library_names" &&
-	     { { test "$prefer_static_libs" = no ||
-		 test "$prefer_static_libs,$installed" = "built,yes"; } ||
-	       test -z "$old_library"; }; then
-	    # We need to hardcode the library path
-	    if test -n "$shlibpath_var" && test -z "$avoidtemprpath" ; then
-	      # Make sure the rpath contains only unique directories.
-	      case "$temp_rpath " in
-	      *" $dir "*) ;;
-	      *" $absdir "*) ;;
-	      *) temp_rpath="$temp_rpath $absdir" ;;
-	      esac
-	    fi
-
-	    # Hardcode the library path.
-	    # Skip directories that are in the system default run-time
-	    # search path.
-	    case " $sys_lib_dlsearch_path " in
-	    *" $absdir "*) ;;
-	    *)
-	      case "$compile_rpath " in
-	      *" $absdir "*) ;;
-	      *) compile_rpath="$compile_rpath $absdir"
-	      esac
-	      ;;
-	    esac
-	    case " $sys_lib_dlsearch_path " in
-	    *" $libdir "*) ;;
-	    *)
-	      case "$finalize_rpath " in
-	      *" $libdir "*) ;;
-	      *) finalize_rpath="$finalize_rpath $libdir"
-	      esac
-	      ;;
-	    esac
-	  fi # $linkmode,$pass = prog,link...
-
-	  if test "$alldeplibs" = yes &&
-	     { test "$deplibs_check_method" = pass_all ||
-	       { test "$build_libtool_libs" = yes &&
-		 test -n "$library_names"; }; }; then
-	    # We only need to search for static libraries
-	    continue
-	  fi
-	fi
-
-	link_static=no # Whether the deplib will be linked statically
-	use_static_libs=$prefer_static_libs
-	if test "$use_static_libs" = built && test "$installed" = yes ; then
-	  use_static_libs=no
-	fi
-	if test -n "$library_names" &&
-	   { test "$use_static_libs" = no || test -z "$old_library"; }; then
-	  if test "$installed" = no; then
-	    notinst_deplibs="$notinst_deplibs $lib"
-	    need_relink=yes
-	  fi
-	  # This is a shared library
-
-	  # Warn about portability, can't link against -module's on
-	  # some systems (darwin)
-	  if test "$shouldnotlink" = yes && test "$pass" = link ; then
-	    $echo
-	    if test "$linkmode" = prog; then
-	      $echo "*** Warning: Linking the executable $output against the loadable module"
-	    else
-	      $echo "*** Warning: Linking the shared library $output against the loadable module"
-	    fi
-	    $echo "*** $linklib is not portable!"
-	  fi
-	  if test "$linkmode" = lib &&
-	     test "$hardcode_into_libs" = yes; then
-	    # Hardcode the library path.
-	    # Skip directories that are in the system default run-time
-	    # search path.
-	    case " $sys_lib_dlsearch_path " in
-	    *" $absdir "*) ;;
-	    *)
-	      case "$compile_rpath " in
-	      *" $absdir "*) ;;
-	      *) compile_rpath="$compile_rpath $absdir"
-	      esac
-	      ;;
-	    esac
-	    case " $sys_lib_dlsearch_path " in
-	    *" $libdir "*) ;;
-	    *)
-	      case "$finalize_rpath " in
-	      *" $libdir "*) ;;
-	      *) finalize_rpath="$finalize_rpath $libdir"
-	      esac
-	      ;;
-	    esac
-	  fi
-
-	  if test -n "$old_archive_from_expsyms_cmds"; then
-	    # figure out the soname
-	    set dummy $library_names
-	    realname="$2"
-	    shift; shift
-	    libname=`eval \\$echo \"$libname_spec\"`
-	    # use dlname if we got it. it's perfectly good, no?
-	    if test -n "$dlname"; then
-	      soname="$dlname"
-	    elif test -n "$soname_spec"; then
-	      # bleh windows
-	      case $host in
-	      *cygwin* | mingw*)
-		major=`expr $current - $age`
-		versuffix="-$major"
-		;;
-	      esac
-	      eval soname=\"$soname_spec\"
-	    else
-	      soname="$realname"
-	    fi
-
-	    # Make a new name for the extract_expsyms_cmds to use
-	    soroot="$soname"
-	    soname=`$echo $soroot | ${SED} -e 's/^.*\///'`
-	    newlib="libimp-`$echo $soname | ${SED} 's/^lib//;s/\.dll$//'`.a"
-
-	    # If the library has no export list, then create one now
-	    if test -f "$output_objdir/$soname-def"; then :
-	    else
-	      $show "extracting exported symbol list from \`$soname'"
-	      save_ifs="$IFS"; IFS='~'
-	      cmds=$extract_expsyms_cmds
-	      for cmd in $cmds; do
-		IFS="$save_ifs"
-		eval cmd=\"$cmd\"
-		$show "$cmd"
-		$run eval "$cmd" || exit $?
-	      done
-	      IFS="$save_ifs"
-	    fi
-
-	    # Create $newlib
-	    if test -f "$output_objdir/$newlib"; then :; else
-	      $show "generating import library for \`$soname'"
-	      save_ifs="$IFS"; IFS='~'
-	      cmds=$old_archive_from_expsyms_cmds
-	      for cmd in $cmds; do
-		IFS="$save_ifs"
-		eval cmd=\"$cmd\"
-		$show "$cmd"
-		$run eval "$cmd" || exit $?
-	      done
-	      IFS="$save_ifs"
-	    fi
-	    # make sure the library variables are pointing to the new library
-	    dir=$output_objdir
-	    linklib=$newlib
-	  fi # test -n "$old_archive_from_expsyms_cmds"
-
-	  if test "$linkmode" = prog || test "$mode" != relink; then
-	    add_shlibpath=
-	    add_dir=
-	    add=
-	    lib_linked=yes
-	    case $hardcode_action in
-	    immediate | unsupported)
-	      if test "$hardcode_direct" = no; then
-		add="$dir/$linklib"
-		case $host in
-		  *-*-sco3.2v5.0.[024]*) add_dir="-L$dir" ;;
-		  *-*-sysv4*uw2*) add_dir="-L$dir" ;;
-		  *-*-sysv5OpenUNIX* | *-*-sysv5UnixWare7.[01].[10]* | \
-		    *-*-unixware7*) add_dir="-L$dir" ;;
-		  *-*-darwin* )
-		    # if the lib is a module then we can not link against
-		    # it, someone is ignoring the new warnings I added
-		    if /usr/bin/file -L $add 2> /dev/null |
-                      $EGREP ": [^:]* bundle" >/dev/null ; then
-		      $echo "** Warning, lib $linklib is a module, not a shared library"
-		      if test -z "$old_library" ; then
-		        $echo
-		        $echo "** And there doesn't seem to be a static archive available"
-		        $echo "** The link will probably fail, sorry"
-		      else
-		        add="$dir/$old_library"
-		      fi
-		    fi
-		esac
-	      elif test "$hardcode_minus_L" = no; then
-		case $host in
-		*-*-sunos*) add_shlibpath="$dir" ;;
-		esac
-		add_dir="-L$dir"
-		add="-l$name"
-	      elif test "$hardcode_shlibpath_var" = no; then
-		add_shlibpath="$dir"
-		add="-l$name"
-	      else
-		lib_linked=no
-	      fi
-	      ;;
-	    relink)
-	      if test "$hardcode_direct" = yes; then
-		add="$dir/$linklib"
-	      elif test "$hardcode_minus_L" = yes; then
-		add_dir="-L$dir"
-		# Try looking first in the location we're being installed to.
-		if test -n "$inst_prefix_dir"; then
-		  case $libdir in
-		    [\\/]*)
-		      add_dir="$add_dir -L$inst_prefix_dir$libdir"
-		      ;;
-		  esac
-		fi
-		add="-l$name"
-	      elif test "$hardcode_shlibpath_var" = yes; then
-		add_shlibpath="$dir"
-		add="-l$name"
-	      else
-		lib_linked=no
-	      fi
-	      ;;
-	    *) lib_linked=no ;;
-	    esac
-
-	    if test "$lib_linked" != yes; then
-	      $echo "$modename: configuration error: unsupported hardcode properties"
-	      exit $EXIT_FAILURE
-	    fi
-
-	    if test -n "$add_shlibpath"; then
-	      case :$compile_shlibpath: in
-	      *":$add_shlibpath:"*) ;;
-	      *) compile_shlibpath="$compile_shlibpath$add_shlibpath:" ;;
-	      esac
-	    fi
-	    if test "$linkmode" = prog; then
-	      test -n "$add_dir" && compile_deplibs="$add_dir $compile_deplibs"
-	      test -n "$add" && compile_deplibs="$add $compile_deplibs"
-	    else
-	      test -n "$add_dir" && deplibs="$add_dir $deplibs"
-	      test -n "$add" && deplibs="$add $deplibs"
-	      if test "$hardcode_direct" != yes && \
-		 test "$hardcode_minus_L" != yes && \
-		 test "$hardcode_shlibpath_var" = yes; then
-		case :$finalize_shlibpath: in
-		*":$libdir:"*) ;;
-		*) finalize_shlibpath="$finalize_shlibpath$libdir:" ;;
-		esac
-	      fi
-	    fi
-	  fi
-
-	  if test "$linkmode" = prog || test "$mode" = relink; then
-	    add_shlibpath=
-	    add_dir=
-	    add=
-	    # Finalize command for both is simple: just hardcode it.
-	    if test "$hardcode_direct" = yes; then
-	      add="$libdir/$linklib"
-	    elif test "$hardcode_minus_L" = yes; then
-	      add_dir="-L$libdir"
-	      add="-l$name"
-	    elif test "$hardcode_shlibpath_var" = yes; then
-	      case :$finalize_shlibpath: in
-	      *":$libdir:"*) ;;
-	      *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;;
-	      esac
-	      add="-l$name"
-	    elif test "$hardcode_automatic" = yes; then
-	      if test -n "$inst_prefix_dir" &&
-		 test -f "$inst_prefix_dir$libdir/$linklib" ; then
-	        add="$inst_prefix_dir$libdir/$linklib"
-	      else
-	        add="$libdir/$linklib"
-	      fi
-	    else
-	      # We cannot seem to hardcode it, guess we'll fake it.
-	      add_dir="-L$libdir"
-	      # Try looking first in the location we're being installed to.
-	      if test -n "$inst_prefix_dir"; then
-		case $libdir in
-		  [\\/]*)
-		    add_dir="$add_dir -L$inst_prefix_dir$libdir"
-		    ;;
-		esac
-	      fi
-	      add="-l$name"
-	    fi
-
-	    if test "$linkmode" = prog; then
-	      test -n "$add_dir" && finalize_deplibs="$add_dir $finalize_deplibs"
-	      test -n "$add" && finalize_deplibs="$add $finalize_deplibs"
-	    else
-	      test -n "$add_dir" && deplibs="$add_dir $deplibs"
-	      test -n "$add" && deplibs="$add $deplibs"
-	    fi
-	  fi
-	elif test "$linkmode" = prog; then
-	  # Here we assume that one of hardcode_direct or hardcode_minus_L
-	  # is not unsupported.  This is valid on all known static and
-	  # shared platforms.
-	  if test "$hardcode_direct" != unsupported; then
-	    test -n "$old_library" && linklib="$old_library"
-	    compile_deplibs="$dir/$linklib $compile_deplibs"
-	    finalize_deplibs="$dir/$linklib $finalize_deplibs"
-	  else
-	    compile_deplibs="-l$name -L$dir $compile_deplibs"
-	    finalize_deplibs="-l$name -L$dir $finalize_deplibs"
-	  fi
-	elif test "$build_libtool_libs" = yes; then
-	  # Not a shared library
-	  if test "$deplibs_check_method" != pass_all; then
-	    # We're trying link a shared library against a static one
-	    # but the system doesn't support it.
-
-	    # Just print a warning and add the library to dependency_libs so
-	    # that the program can be linked against the static library.
-	    $echo
-	    $echo "*** Warning: This system can not link to static lib archive $lib."
-	    $echo "*** I have the capability to make that library automatically link in when"
-	    $echo "*** you link to this library.  But I can only do this if you have a"
-	    $echo "*** shared version of the library, which you do not appear to have."
-	    if test "$module" = yes; then
-	      $echo "*** But as you try to build a module library, libtool will still create "
-	      $echo "*** a static module, that should work as long as the dlopening application"
-	      $echo "*** is linked with the -dlopen flag to resolve symbols at runtime."
-	      if test -z "$global_symbol_pipe"; then
-		$echo
-		$echo "*** However, this would only work if libtool was able to extract symbol"
-		$echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
-		$echo "*** not find such a program.  So, this module is probably useless."
-		$echo "*** \`nm' from GNU binutils and a full rebuild may help."
-	      fi
-	      if test "$build_old_libs" = no; then
-		build_libtool_libs=module
-		build_old_libs=yes
-	      else
-		build_libtool_libs=no
-	      fi
-	    fi
-	  else
-	    deplibs="$dir/$old_library $deplibs"
-	    link_static=yes
-	  fi
-	fi # link shared/static library?
-
-	if test "$linkmode" = lib; then
-	  if test -n "$dependency_libs" &&
-	     { test "$hardcode_into_libs" != yes ||
-	       test "$build_old_libs" = yes ||
-	       test "$link_static" = yes; }; then
-	    # Extract -R from dependency_libs
-	    temp_deplibs=
-	    for libdir in $dependency_libs; do
-	      case $libdir in
-	      -R*) temp_xrpath=`$echo "X$libdir" | $Xsed -e 's/^-R//'`
-		   case " $xrpath " in
-		   *" $temp_xrpath "*) ;;
-		   *) xrpath="$xrpath $temp_xrpath";;
-		   esac;;
-	      *) temp_deplibs="$temp_deplibs $libdir";;
-	      esac
-	    done
-	    dependency_libs="$temp_deplibs"
-	  fi
-
-	  newlib_search_path="$newlib_search_path $absdir"
-	  # Link against this library
-	  test "$link_static" = no && newdependency_libs="$abs_ladir/$laname $newdependency_libs"
-	  # ... and its dependency_libs
-	  tmp_libs=
-	  for deplib in $dependency_libs; do
-	    newdependency_libs="$deplib $newdependency_libs"
-	    if test "X$duplicate_deps" = "Xyes" ; then
-	      case "$tmp_libs " in
-	      *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
-	      esac
-	    fi
-	    tmp_libs="$tmp_libs $deplib"
-	  done
-
-	  if test "$link_all_deplibs" != no; then
-	    # Add the search paths of all dependency libraries
-	    for deplib in $dependency_libs; do
-	      case $deplib in
-	      -L*) path="$deplib" ;;
-	      *.la)
-		dir=`$echo "X$deplib" | $Xsed -e 's%/[^/]*$%%'`
-		test "X$dir" = "X$deplib" && dir="."
-		# We need an absolute path.
-		case $dir in
-		[\\/]* | [A-Za-z]:[\\/]*) absdir="$dir" ;;
-		*)
-		  absdir=`cd "$dir" && pwd`
-		  if test -z "$absdir"; then
-		    $echo "$modename: warning: cannot determine absolute directory name of \`$dir'" 1>&2
-		    absdir="$dir"
-		  fi
-		  ;;
-		esac
-		if grep "^installed=no" $deplib > /dev/null; then
-		  path="$absdir/$objdir"
-		else
-		  eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
-		  if test -z "$libdir"; then
-		    $echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2
-		    exit $EXIT_FAILURE
-		  fi
-		  if test "$absdir" != "$libdir"; then
-		    $echo "$modename: warning: \`$deplib' seems to be moved" 1>&2
-		  fi
-		  path="$absdir"
-		fi
-		depdepl=
-		case $host in
-		*-*-darwin*)
-		  # we do not want to link against static libs,
-		  # but need to link against shared
-		  eval deplibrary_names=`${SED} -n -e 's/^library_names=\(.*\)$/\1/p' $deplib`
-		  if test -n "$deplibrary_names" ; then
-		    for tmp in $deplibrary_names ; do
-		      depdepl=$tmp
-		    done
-		    if test -f "$path/$depdepl" ; then
-		      depdepl="$path/$depdepl"
-		    fi
-		    # do not add paths which are already there
-		    case " $newlib_search_path " in
-		    *" $path "*) ;;
-		    *) newlib_search_path="$newlib_search_path $path";;
-		    esac
-		  fi
-		  path=""
-		  ;;
-		*)
-		  path="-L$path"
-		  ;;
-		esac
-		;;
-	      -l*)
-		case $host in
-		*-*-darwin*)
-		  # Again, we only want to link against shared libraries
-		  eval tmp_libs=`$echo "X$deplib" | $Xsed -e "s,^\-l,,"`
-		  for tmp in $newlib_search_path ; do
-		    if test -f "$tmp/lib$tmp_libs.dylib" ; then
-		      eval depdepl="$tmp/lib$tmp_libs.dylib"
-		      break
-		    fi
-		  done
-		  path=""
-		  ;;
-		*) continue ;;
-		esac
-		;;
-	      *) continue ;;
-	      esac
-	      case " $deplibs " in
-	      *" $path "*) ;;
-	      *) deplibs="$path $deplibs" ;;
-	      esac
-	      case " $deplibs " in
-	      *" $depdepl "*) ;;
-	      *) deplibs="$depdepl $deplibs" ;;
-	      esac
-	    done
-	  fi # link_all_deplibs != no
-	fi # linkmode = lib
-      done # for deplib in $libs
-      dependency_libs="$newdependency_libs"
-      if test "$pass" = dlpreopen; then
-	# Link the dlpreopened libraries before other libraries
-	for deplib in $save_deplibs; do
-	  deplibs="$deplib $deplibs"
-	done
-      fi
-      if test "$pass" != dlopen; then
-	if test "$pass" != conv; then
-	  # Make sure lib_search_path contains only unique directories.
-	  lib_search_path=
-	  for dir in $newlib_search_path; do
-	    case "$lib_search_path " in
-	    *" $dir "*) ;;
-	    *) lib_search_path="$lib_search_path $dir" ;;
-	    esac
-	  done
-	  newlib_search_path=
-	fi
-
-	if test "$linkmode,$pass" != "prog,link"; then
-	  vars="deplibs"
-	else
-	  vars="compile_deplibs finalize_deplibs"
-	fi
-	for var in $vars dependency_libs; do
-	  # Add libraries to $var in reverse order
-	  eval tmp_libs=\"\$$var\"
-	  new_libs=
-	  for deplib in $tmp_libs; do
-	    # FIXME: Pedantically, this is the right thing to do, so
-	    #        that some nasty dependency loop isn't accidentally
-	    #        broken:
-	    #new_libs="$deplib $new_libs"
-	    # Pragmatically, this seems to cause very few problems in
-	    # practice:
-	    case $deplib in
-	    -L*) new_libs="$deplib $new_libs" ;;
-	    -R*) ;;
-	    *)
-	      # And here is the reason: when a library appears more
-	      # than once as an explicit dependence of a library, or
-	      # is implicitly linked in more than once by the
-	      # compiler, it is considered special, and multiple
-	      # occurrences thereof are not removed.  Compare this
-	      # with having the same library being listed as a
-	      # dependency of multiple other libraries: in this case,
-	      # we know (pedantically, we assume) the library does not
-	      # need to be listed more than once, so we keep only the
-	      # last copy.  This is not always right, but it is rare
-	      # enough that we require users that really mean to play
-	      # such unportable linking tricks to link the library
-	      # using -Wl,-lname, so that libtool does not consider it
-	      # for duplicate removal.
-	      case " $specialdeplibs " in
-	      *" $deplib "*) new_libs="$deplib $new_libs" ;;
-	      *)
-		case " $new_libs " in
-		*" $deplib "*) ;;
-		*) new_libs="$deplib $new_libs" ;;
-		esac
-		;;
-	      esac
-	      ;;
-	    esac
-	  done
-	  tmp_libs=
-	  for deplib in $new_libs; do
-	    case $deplib in
-	    -L*)
-	      case " $tmp_libs " in
-	      *" $deplib "*) ;;
-	      *) tmp_libs="$tmp_libs $deplib" ;;
-	      esac
-	      ;;
-	    *) tmp_libs="$tmp_libs $deplib" ;;
-	    esac
-	  done
-	  eval $var=\"$tmp_libs\"
-	done # for var
-      fi
-      # Last step: remove runtime libs from dependency_libs
-      # (they stay in deplibs)
-      tmp_libs=
-      for i in $dependency_libs ; do
-	case " $predeps $postdeps $compiler_lib_search_path " in
-	*" $i "*)
-	  i=""
-	  ;;
-	esac
-	if test -n "$i" ; then
-	  tmp_libs="$tmp_libs $i"
-	fi
-      done
-      dependency_libs=$tmp_libs
-    done # for pass
-    if test "$linkmode" = prog; then
-      dlfiles="$newdlfiles"
-      dlprefiles="$newdlprefiles"
-    fi
-
-    case $linkmode in
-    oldlib)
-      if test -n "$deplibs"; then
-	$echo "$modename: warning: \`-l' and \`-L' are ignored for archives" 1>&2
-      fi
-
-      if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
-	$echo "$modename: warning: \`-dlopen' is ignored for archives" 1>&2
-      fi
-
-      if test -n "$rpath"; then
-	$echo "$modename: warning: \`-rpath' is ignored for archives" 1>&2
-      fi
-
-      if test -n "$xrpath"; then
-	$echo "$modename: warning: \`-R' is ignored for archives" 1>&2
-      fi
-
-      if test -n "$vinfo"; then
-	$echo "$modename: warning: \`-version-info/-version-number' is ignored for archives" 1>&2
-      fi
-
-      if test -n "$release"; then
-	$echo "$modename: warning: \`-release' is ignored for archives" 1>&2
-      fi
-
-      if test -n "$export_symbols" || test -n "$export_symbols_regex"; then
-	$echo "$modename: warning: \`-export-symbols' is ignored for archives" 1>&2
-      fi
-
-      # Now set the variables for building old libraries.
-      build_libtool_libs=no
-      oldlibs="$output"
-      objs="$objs$old_deplibs"
-      ;;
-
-    lib)
-      # Make sure we only generate libraries of the form `libNAME.la'.
-      case $outputname in
-      lib*)
-	name=`$echo "X$outputname" | $Xsed -e 's/\.la$//' -e 's/^lib//'`
-	eval shared_ext=\"$shrext_cmds\"
-	eval libname=\"$libname_spec\"
-	;;
-      *)
-	if test "$module" = no; then
-	  $echo "$modename: libtool library \`$output' must begin with \`lib'" 1>&2
-	  $echo "$help" 1>&2
-	  exit $EXIT_FAILURE
-	fi
-	if test "$need_lib_prefix" != no; then
-	  # Add the "lib" prefix for modules if required
-	  name=`$echo "X$outputname" | $Xsed -e 's/\.la$//'`
-	  eval shared_ext=\"$shrext_cmds\"
-	  eval libname=\"$libname_spec\"
-	else
-	  libname=`$echo "X$outputname" | $Xsed -e 's/\.la$//'`
-	fi
-	;;
-      esac
-
-      if test -n "$objs"; then
-	if test "$deplibs_check_method" != pass_all; then
-	  $echo "$modename: cannot build libtool library \`$output' from non-libtool objects on this host:$objs" 2>&1
-	  exit $EXIT_FAILURE
-	else
-	  $echo
-	  $echo "*** Warning: Linking the shared library $output against the non-libtool"
-	  $echo "*** objects $objs is not portable!"
-	  libobjs="$libobjs $objs"
-	fi
-      fi
-
-      if test "$dlself" != no; then
-	$echo "$modename: warning: \`-dlopen self' is ignored for libtool libraries" 1>&2
-      fi
-
-      set dummy $rpath
-      if test "$#" -gt 2; then
-	$echo "$modename: warning: ignoring multiple \`-rpath's for a libtool library" 1>&2
-      fi
-      install_libdir="$2"
-
-      oldlibs=
-      if test -z "$rpath"; then
-	if test "$build_libtool_libs" = yes; then
-	  # Building a libtool convenience library.
-	  # Some compilers have problems with a `.al' extension so
-	  # convenience libraries should have the same extension an
-	  # archive normally would.
-	  oldlibs="$output_objdir/$libname.$libext $oldlibs"
-	  build_libtool_libs=convenience
-	  build_old_libs=yes
-	fi
-
-	if test -n "$vinfo"; then
-	  $echo "$modename: warning: \`-version-info/-version-number' is ignored for convenience libraries" 1>&2
-	fi
-
-	if test -n "$release"; then
-	  $echo "$modename: warning: \`-release' is ignored for convenience libraries" 1>&2
-	fi
-      else
-
-	# Parse the version information argument.
-	save_ifs="$IFS"; IFS=':'
-	set dummy $vinfo 0 0 0
-	IFS="$save_ifs"
-
-	if test -n "$8"; then
-	  $echo "$modename: too many parameters to \`-version-info'" 1>&2
-	  $echo "$help" 1>&2
-	  exit $EXIT_FAILURE
-	fi
-
-	# convert absolute version numbers to libtool ages
-	# this retains compatibility with .la files and attempts
-	# to make the code below a bit more comprehensible
-
-	case $vinfo_number in
-	yes)
-	  number_major="$2"
-	  number_minor="$3"
-	  number_revision="$4"
-	  #
-	  # There are really only two kinds -- those that
-	  # use the current revision as the major version
-	  # and those that subtract age and use age as
-	  # a minor version.  But, then there is irix
-	  # which has an extra 1 added just for fun
-	  #
-	  case $version_type in
-	  darwin|linux|osf|windows|none)
-	    current=`expr $number_major + $number_minor`
-	    age="$number_minor"
-	    revision="$number_revision"
-	    ;;
-	  freebsd-aout|freebsd-elf|sunos)
-	    current="$number_major"
-	    revision="$number_minor"
-	    age="0"
-	    ;;
-	  irix|nonstopux)
-	    current=`expr $number_major + $number_minor - 1`
-	    age="$number_minor"
-	    revision="$number_minor"
-	    ;;
-	  esac
-	  ;;
-	no)
-	  current="$2"
-	  revision="$3"
-	  age="$4"
-	  ;;
-	esac
-
-	# Check that each of the things are valid numbers.
-	case $current in
-	0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
-	*)
-	  $echo "$modename: CURRENT \`$current' must be a nonnegative integer" 1>&2
-	  $echo "$modename: \`$vinfo' is not valid version information" 1>&2
-	  exit $EXIT_FAILURE
-	  ;;
-	esac
-
-	case $revision in
-	0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
-	*)
-	  $echo "$modename: REVISION \`$revision' must be a nonnegative integer" 1>&2
-	  $echo "$modename: \`$vinfo' is not valid version information" 1>&2
-	  exit $EXIT_FAILURE
-	  ;;
-	esac
-
-	case $age in
-	0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
-	*)
-	  $echo "$modename: AGE \`$age' must be a nonnegative integer" 1>&2
-	  $echo "$modename: \`$vinfo' is not valid version information" 1>&2
-	  exit $EXIT_FAILURE
-	  ;;
-	esac
-
-	if test "$age" -gt "$current"; then
-	  $echo "$modename: AGE \`$age' is greater than the current interface number \`$current'" 1>&2
-	  $echo "$modename: \`$vinfo' is not valid version information" 1>&2
-	  exit $EXIT_FAILURE
-	fi
-
-	# Calculate the version variables.
-	major=
-	versuffix=
-	verstring=
-	case $version_type in
-	none) ;;
-
-	darwin)
-	  # Like Linux, but with the current version available in
-	  # verstring for coding it into the library header
-	  major=.`expr $current - $age`
-	  versuffix="$major.$age.$revision"
-	  # Darwin ld doesn't like 0 for these options...
-	  minor_current=`expr $current + 1`
-	  verstring="${wl}-compatibility_version ${wl}$minor_current ${wl}-current_version ${wl}$minor_current.$revision"
-	  ;;
-
-	freebsd-aout)
-	  major=".$current"
-	  versuffix=".$current.$revision";
-	  ;;
-
-	freebsd-elf)
-	  major=".$current"
-	  versuffix=".$current";
-	  ;;
-
-	irix | nonstopux)
-	  major=`expr $current - $age + 1`
-
-	  case $version_type in
-	    nonstopux) verstring_prefix=nonstopux ;;
-	    *)         verstring_prefix=sgi ;;
-	  esac
-	  verstring="$verstring_prefix$major.$revision"
-
-	  # Add in all the interfaces that we are compatible with.
-	  loop=$revision
-	  while test "$loop" -ne 0; do
-	    iface=`expr $revision - $loop`
-	    loop=`expr $loop - 1`
-	    verstring="$verstring_prefix$major.$iface:$verstring"
-	  done
-
-	  # Before this point, $major must not contain `.'.
-	  major=.$major
-	  versuffix="$major.$revision"
-	  ;;
-
-	linux)
-	  major=.`expr $current - $age`
-	  versuffix="$major.$age.$revision"
-	  ;;
-
-	osf)
-	  major=.`expr $current - $age`
-	  versuffix=".$current.$age.$revision"
-	  verstring="$current.$age.$revision"
-
-	  # Add in all the interfaces that we are compatible with.
-	  loop=$age
-	  while test "$loop" -ne 0; do
-	    iface=`expr $current - $loop`
-	    loop=`expr $loop - 1`
-	    verstring="$verstring:${iface}.0"
-	  done
-
-	  # Make executables depend on our current version.
-	  verstring="$verstring:${current}.0"
-	  ;;
-
-	sunos)
-	  major=".$current"
-	  versuffix=".$current.$revision"
-	  ;;
-
-	windows)
-	  # Use '-' rather than '.', since we only want one
-	  # extension on DOS 8.3 filesystems.
-	  major=`expr $current - $age`
-	  versuffix="-$major"
-	  ;;
-
-	*)
-	  $echo "$modename: unknown library version type \`$version_type'" 1>&2
-	  $echo "Fatal configuration error.  See the $PACKAGE docs for more information." 1>&2
-	  exit $EXIT_FAILURE
-	  ;;
-	esac
-
-	# Clear the version info if we defaulted, and they specified a release.
-	if test -z "$vinfo" && test -n "$release"; then
-	  major=
-	  case $version_type in
-	  darwin)
-	    # we can't check for "0.0" in archive_cmds due to quoting
-	    # problems, so we reset it completely
-	    verstring=
-	    ;;
-	  *)
-	    verstring="0.0"
-	    ;;
-	  esac
-	  if test "$need_version" = no; then
-	    versuffix=
-	  else
-	    versuffix=".0.0"
-	  fi
-	fi
-
-	# Remove version info from name if versioning should be avoided
-	if test "$avoid_version" = yes && test "$need_version" = no; then
-	  major=
-	  versuffix=
-	  verstring=""
-	fi
-
-	# Check to see if the archive will have undefined symbols.
-	if test "$allow_undefined" = yes; then
-	  if test "$allow_undefined_flag" = unsupported; then
-	    $echo "$modename: warning: undefined symbols not allowed in $host shared libraries" 1>&2
-	    build_libtool_libs=no
-	    build_old_libs=yes
-	  fi
-	else
-	  # Don't allow undefined symbols.
-	  allow_undefined_flag="$no_undefined_flag"
-	fi
-      fi
-
-      if test "$mode" != relink; then
-	# Remove our outputs, but don't remove object files since they
-	# may have been created when compiling PIC objects.
-	removelist=
-	tempremovelist=`$echo "$output_objdir/*"`
-	for p in $tempremovelist; do
-	  case $p in
-	    *.$objext)
-	       ;;
-	    $output_objdir/$outputname | $output_objdir/$libname.* | $output_objdir/${libname}${release}.*)
-	       if test "X$precious_files_regex" != "X"; then
-	         if echo $p | $EGREP -e "$precious_files_regex" >/dev/null 2>&1
-	         then
-		   continue
-		 fi
-	       fi
-	       removelist="$removelist $p"
-	       ;;
-	    *) ;;
-	  esac
-	done
-	if test -n "$removelist"; then
-	  $show "${rm}r $removelist"
-	  $run ${rm}r $removelist
-	fi
-      fi
-
-      # Now set the variables for building old libraries.
-      if test "$build_old_libs" = yes && test "$build_libtool_libs" != convenience ; then
-	oldlibs="$oldlibs $output_objdir/$libname.$libext"
-
-	# Transform .lo files to .o files.
-	oldobjs="$objs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}'$/d' -e "$lo2o" | $NL2SP`
-      fi
-
-      # Eliminate all temporary directories.
-      #for path in $notinst_path; do
-      #	lib_search_path=`$echo "$lib_search_path " | ${SED} -e "s% $path % %g"`
-      #	deplibs=`$echo "$deplibs " | ${SED} -e "s% -L$path % %g"`
-      #	dependency_libs=`$echo "$dependency_libs " | ${SED} -e "s% -L$path % %g"`
-      #done
-
-      if test -n "$xrpath"; then
-	# If the user specified any rpath flags, then add them.
-	temp_xrpath=
-	for libdir in $xrpath; do
-	  temp_xrpath="$temp_xrpath -R$libdir"
-	  case "$finalize_rpath " in
-	  *" $libdir "*) ;;
-	  *) finalize_rpath="$finalize_rpath $libdir" ;;
-	  esac
-	done
-	if test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes; then
-	  dependency_libs="$temp_xrpath $dependency_libs"
-	fi
-      fi
-
-      # Make sure dlfiles contains only unique files that won't be dlpreopened
-      old_dlfiles="$dlfiles"
-      dlfiles=
-      for lib in $old_dlfiles; do
-	case " $dlprefiles $dlfiles " in
-	*" $lib "*) ;;
-	*) dlfiles="$dlfiles $lib" ;;
-	esac
-      done
-
-      # Make sure dlprefiles contains only unique files
-      old_dlprefiles="$dlprefiles"
-      dlprefiles=
-      for lib in $old_dlprefiles; do
-	case "$dlprefiles " in
-	*" $lib "*) ;;
-	*) dlprefiles="$dlprefiles $lib" ;;
-	esac
-      done
-
-      if test "$build_libtool_libs" = yes; then
-	if test -n "$rpath"; then
-	  case $host in
-	  *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos*)
-	    # these systems don't actually have a c library (as such)!
-	    ;;
-	  *-*-rhapsody* | *-*-darwin1.[012])
-	    # Rhapsody C library is in the System framework
-	    deplibs="$deplibs -framework System"
-	    ;;
-	  *-*-netbsd*)
-	    # Don't link with libc until the a.out ld.so is fixed.
-	    ;;
-	  *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
-	    # Do not include libc due to us having libc/libc_r.
-	    ;;
-	  *-*-sco3.2v5* | *-*-sco5v6*)
-	    # Causes problems with __ctype
-	    ;;
-	  *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*)
-	    # Compiler inserts libc in the correct place for threads to work
-	    ;;
- 	  *)
-	    # Add libc to deplibs on all other systems if necessary.
-	    if test "$build_libtool_need_lc" = "yes"; then
-	      deplibs="$deplibs -lc"
-	    fi
-	    ;;
-	  esac
-	fi
-
-	# Transform deplibs into only deplibs that can be linked in shared.
-	name_save=$name
-	libname_save=$libname
-	release_save=$release
-	versuffix_save=$versuffix
-	major_save=$major
-	# I'm not sure if I'm treating the release correctly.  I think
-	# release should show up in the -l (ie -lgmp5) so we don't want to
-	# add it in twice.  Is that correct?
-	release=""
-	versuffix=""
-	major=""
-	newdeplibs=
-	droppeddeps=no
-	case $deplibs_check_method in
-	pass_all)
-	  # Don't check for shared/static.  Everything works.
-	  # This might be a little naive.  We might want to check
-	  # whether the library exists or not.  But this is on
-	  # osf3 & osf4 and I'm not really sure... Just
-	  # implementing what was already the behavior.
-	  newdeplibs=$deplibs
-	  ;;
-	test_compile)
-	  # This code stresses the "libraries are programs" paradigm to its
-	  # limits. Maybe even breaks it.  We compile a program, linking it
-	  # against the deplibs as a proxy for the library.  Then we can check
-	  # whether they linked in statically or dynamically with ldd.
-	  $rm conftest.c
-	  cat > conftest.c <<EOF
-	  int main() { return 0; }
-EOF
-	  $rm conftest
-	  if $LTCC $LTCFLAGS -o conftest conftest.c $deplibs; then
-	    ldd_output=`ldd conftest`
-	    for i in $deplibs; do
-	      name=`expr $i : '-l\(.*\)'`
-	      # If $name is empty we are operating on a -L argument.
-              if test "$name" != "" && test "$name" != "0"; then
-		if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
-		  case " $predeps $postdeps " in
-		  *" $i "*)
-		    newdeplibs="$newdeplibs $i"
-		    i=""
-		    ;;
-		  esac
-	        fi
-		if test -n "$i" ; then
-		  libname=`eval \\$echo \"$libname_spec\"`
-		  deplib_matches=`eval \\$echo \"$library_names_spec\"`
-		  set dummy $deplib_matches
-		  deplib_match=$2
-		  if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
-		    newdeplibs="$newdeplibs $i"
-		  else
-		    droppeddeps=yes
-		    $echo
-		    $echo "*** Warning: dynamic linker does not accept needed library $i."
-		    $echo "*** I have the capability to make that library automatically link in when"
-		    $echo "*** you link to this library.  But I can only do this if you have a"
-		    $echo "*** shared version of the library, which I believe you do not have"
-		    $echo "*** because a test_compile did reveal that the linker did not use it for"
-		    $echo "*** its dynamic dependency list that programs get resolved with at runtime."
-		  fi
-		fi
-	      else
-		newdeplibs="$newdeplibs $i"
-	      fi
-	    done
-	  else
-	    # Error occurred in the first compile.  Let's try to salvage
-	    # the situation: Compile a separate program for each library.
-	    for i in $deplibs; do
-	      name=`expr $i : '-l\(.*\)'`
-	      # If $name is empty we are operating on a -L argument.
-              if test "$name" != "" && test "$name" != "0"; then
-		$rm conftest
-		if $LTCC $LTCFLAGS -o conftest conftest.c $i; then
-		  ldd_output=`ldd conftest`
-		  if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
-		    case " $predeps $postdeps " in
-		    *" $i "*)
-		      newdeplibs="$newdeplibs $i"
-		      i=""
-		      ;;
-		    esac
-		  fi
-		  if test -n "$i" ; then
-		    libname=`eval \\$echo \"$libname_spec\"`
-		    deplib_matches=`eval \\$echo \"$library_names_spec\"`
-		    set dummy $deplib_matches
-		    deplib_match=$2
-		    if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
-		      newdeplibs="$newdeplibs $i"
-		    else
-		      droppeddeps=yes
-		      $echo
-		      $echo "*** Warning: dynamic linker does not accept needed library $i."
-		      $echo "*** I have the capability to make that library automatically link in when"
-		      $echo "*** you link to this library.  But I can only do this if you have a"
-		      $echo "*** shared version of the library, which you do not appear to have"
-		      $echo "*** because a test_compile did reveal that the linker did not use this one"
-		      $echo "*** as a dynamic dependency that programs can get resolved with at runtime."
-		    fi
-		  fi
-		else
-		  droppeddeps=yes
-		  $echo
-		  $echo "*** Warning!  Library $i is needed by this library but I was not able to"
-		  $echo "*** make it link in!  You will probably need to install it or some"
-		  $echo "*** library that it depends on before this library will be fully"
-		  $echo "*** functional.  Installing it before continuing would be even better."
-		fi
-	      else
-		newdeplibs="$newdeplibs $i"
-	      fi
-	    done
-	  fi
-	  ;;
-	file_magic*)
-	  set dummy $deplibs_check_method
-	  file_magic_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"`
-	  for a_deplib in $deplibs; do
-	    name=`expr $a_deplib : '-l\(.*\)'`
-	    # If $name is empty we are operating on a -L argument.
-            if test "$name" != "" && test  "$name" != "0"; then
-	      if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
-		case " $predeps $postdeps " in
-		*" $a_deplib "*)
-		  newdeplibs="$newdeplibs $a_deplib"
-		  a_deplib=""
-		  ;;
-		esac
-	      fi
-	      if test -n "$a_deplib" ; then
-		libname=`eval \\$echo \"$libname_spec\"`
-		for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
-		  potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
-		  for potent_lib in $potential_libs; do
-		      # Follow soft links.
-		      if ls -lLd "$potent_lib" 2>/dev/null \
-			 | grep " -> " >/dev/null; then
-			continue
-		      fi
-		      # The statement above tries to avoid entering an
-		      # endless loop below, in case of cyclic links.
-		      # We might still enter an endless loop, since a link
-		      # loop can be closed while we follow links,
-		      # but so what?
-		      potlib="$potent_lib"
-		      while test -h "$potlib" 2>/dev/null; do
-			potliblink=`ls -ld $potlib | ${SED} 's/.* -> //'`
-			case $potliblink in
-			[\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";;
-			*) potlib=`$echo "X$potlib" | $Xsed -e 's,[^/]*$,,'`"$potliblink";;
-			esac
-		      done
-		      if eval $file_magic_cmd \"\$potlib\" 2>/dev/null \
-			 | ${SED} 10q \
-			 | $EGREP "$file_magic_regex" > /dev/null; then
-			newdeplibs="$newdeplibs $a_deplib"
-			a_deplib=""
-			break 2
-		      fi
-		  done
-		done
-	      fi
-	      if test -n "$a_deplib" ; then
-		droppeddeps=yes
-		$echo
-		$echo "*** Warning: linker path does not have real file for library $a_deplib."
-		$echo "*** I have the capability to make that library automatically link in when"
-		$echo "*** you link to this library.  But I can only do this if you have a"
-		$echo "*** shared version of the library, which you do not appear to have"
-		$echo "*** because I did check the linker path looking for a file starting"
-		if test -z "$potlib" ; then
-		  $echo "*** with $libname but no candidates were found. (...for file magic test)"
-		else
-		  $echo "*** with $libname and none of the candidates passed a file format test"
-		  $echo "*** using a file magic. Last file checked: $potlib"
-		fi
-	      fi
-	    else
-	      # Add a -L argument.
-	      newdeplibs="$newdeplibs $a_deplib"
-	    fi
-	  done # Gone through all deplibs.
-	  ;;
-	match_pattern*)
-	  set dummy $deplibs_check_method
-	  match_pattern_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"`
-	  for a_deplib in $deplibs; do
-	    name=`expr $a_deplib : '-l\(.*\)'`
-	    # If $name is empty we are operating on a -L argument.
-	    if test -n "$name" && test "$name" != "0"; then
-	      if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
-		case " $predeps $postdeps " in
-		*" $a_deplib "*)
-		  newdeplibs="$newdeplibs $a_deplib"
-		  a_deplib=""
-		  ;;
-		esac
-	      fi
-	      if test -n "$a_deplib" ; then
-		libname=`eval \\$echo \"$libname_spec\"`
-		for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
-		  potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
-		  for potent_lib in $potential_libs; do
-		    potlib="$potent_lib" # see symlink-check above in file_magic test
-		    if eval $echo \"$potent_lib\" 2>/dev/null \
-		        | ${SED} 10q \
-		        | $EGREP "$match_pattern_regex" > /dev/null; then
-		      newdeplibs="$newdeplibs $a_deplib"
-		      a_deplib=""
-		      break 2
-		    fi
-		  done
-		done
-	      fi
-	      if test -n "$a_deplib" ; then
-		droppeddeps=yes
-		$echo
-		$echo "*** Warning: linker path does not have real file for library $a_deplib."
-		$echo "*** I have the capability to make that library automatically link in when"
-		$echo "*** you link to this library.  But I can only do this if you have a"
-		$echo "*** shared version of the library, which you do not appear to have"
-		$echo "*** because I did check the linker path looking for a file starting"
-		if test -z "$potlib" ; then
-		  $echo "*** with $libname but no candidates were found. (...for regex pattern test)"
-		else
-		  $echo "*** with $libname and none of the candidates passed a file format test"
-		  $echo "*** using a regex pattern. Last file checked: $potlib"
-		fi
-	      fi
-	    else
-	      # Add a -L argument.
-	      newdeplibs="$newdeplibs $a_deplib"
-	    fi
-	  done # Gone through all deplibs.
-	  ;;
-	none | unknown | *)
-	  newdeplibs=""
-	  tmp_deplibs=`$echo "X $deplibs" | $Xsed -e 's/ -lc$//' \
-	    -e 's/ -[LR][^ ]*//g'`
-	  if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
-	    for i in $predeps $postdeps ; do
-	      # can't use Xsed below, because $i might contain '/'
-	      tmp_deplibs=`$echo "X $tmp_deplibs" | ${SED} -e "1s,^X,," -e "s,$i,,"`
-	    done
-	  fi
-	  if $echo "X $tmp_deplibs" | $Xsed -e 's/[ 	]//g' \
-	    | grep . >/dev/null; then
-	    $echo
-	    if test "X$deplibs_check_method" = "Xnone"; then
-	      $echo "*** Warning: inter-library dependencies are not supported in this platform."
-	    else
-	      $echo "*** Warning: inter-library dependencies are not known to be supported."
-	    fi
-	    $echo "*** All declared inter-library dependencies are being dropped."
-	    droppeddeps=yes
-	  fi
-	  ;;
-	esac
-	versuffix=$versuffix_save
-	major=$major_save
-	release=$release_save
-	libname=$libname_save
-	name=$name_save
-
-	case $host in
-	*-*-rhapsody* | *-*-darwin1.[012])
-	  # On Rhapsody replace the C library is the System framework
-	  newdeplibs=`$echo "X $newdeplibs" | $Xsed -e 's/ -lc / -framework System /'`
-	  ;;
-	esac
-
-	if test "$droppeddeps" = yes; then
-	  if test "$module" = yes; then
-	    $echo
-	    $echo "*** Warning: libtool could not satisfy all declared inter-library"
-	    $echo "*** dependencies of module $libname.  Therefore, libtool will create"
-	    $echo "*** a static module, that should work as long as the dlopening"
-	    $echo "*** application is linked with the -dlopen flag."
-	    if test -z "$global_symbol_pipe"; then
-	      $echo
-	      $echo "*** However, this would only work if libtool was able to extract symbol"
-	      $echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
-	      $echo "*** not find such a program.  So, this module is probably useless."
-	      $echo "*** \`nm' from GNU binutils and a full rebuild may help."
-	    fi
-	    if test "$build_old_libs" = no; then
-	      oldlibs="$output_objdir/$libname.$libext"
-	      build_libtool_libs=module
-	      build_old_libs=yes
-	    else
-	      build_libtool_libs=no
-	    fi
-	  else
-	    $echo "*** The inter-library dependencies that have been dropped here will be"
-	    $echo "*** automatically added whenever a program is linked with this library"
-	    $echo "*** or is declared to -dlopen it."
-
-	    if test "$allow_undefined" = no; then
-	      $echo
-	      $echo "*** Since this library must not contain undefined symbols,"
-	      $echo "*** because either the platform does not support them or"
-	      $echo "*** it was explicitly requested with -no-undefined,"
-	      $echo "*** libtool will only create a static version of it."
-	      if test "$build_old_libs" = no; then
-		oldlibs="$output_objdir/$libname.$libext"
-		build_libtool_libs=module
-		build_old_libs=yes
-	      else
-		build_libtool_libs=no
-	      fi
-	    fi
-	  fi
-	fi
-	# Done checking deplibs!
-	deplibs=$newdeplibs
-      fi
-
-
-      # move library search paths that coincide with paths to not yet
-      # installed libraries to the beginning of the library search list
-      new_libs=
-      for path in $notinst_path; do
-	case " $new_libs " in
-	*" -L$path/$objdir "*) ;;
-	*)
-	  case " $deplibs " in
-	  *" -L$path/$objdir "*)
-	    new_libs="$new_libs -L$path/$objdir" ;;
-	  esac
-	  ;;
-	esac
-      done
-      for deplib in $deplibs; do
-	case $deplib in
-	-L*)
-	  case " $new_libs " in
-	  *" $deplib "*) ;;
-	  *) new_libs="$new_libs $deplib" ;;
-	  esac
-	  ;;
-	*) new_libs="$new_libs $deplib" ;;
-	esac
-      done
-      deplibs="$new_libs"
-
-
-      # All the library-specific variables (install_libdir is set above).
-      library_names=
-      old_library=
-      dlname=
-
-      # Test again, we may have decided not to build it any more
-      if test "$build_libtool_libs" = yes; then
-	if test "$hardcode_into_libs" = yes; then
-	  # Hardcode the library paths
-	  hardcode_libdirs=
-	  dep_rpath=
-	  rpath="$finalize_rpath"
-	  test "$mode" != relink && rpath="$compile_rpath$rpath"
-	  for libdir in $rpath; do
-	    if test -n "$hardcode_libdir_flag_spec"; then
-	      if test -n "$hardcode_libdir_separator"; then
-		if test -z "$hardcode_libdirs"; then
-		  hardcode_libdirs="$libdir"
-		else
-		  # Just accumulate the unique libdirs.
-		  case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
-		  *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
-		    ;;
-		  *)
-		    hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
-		    ;;
-		  esac
-		fi
-	      else
-		eval flag=\"$hardcode_libdir_flag_spec\"
-		dep_rpath="$dep_rpath $flag"
-	      fi
-	    elif test -n "$runpath_var"; then
-	      case "$perm_rpath " in
-	      *" $libdir "*) ;;
-	      *) perm_rpath="$perm_rpath $libdir" ;;
-	      esac
-	    fi
-	  done
-	  # Substitute the hardcoded libdirs into the rpath.
-	  if test -n "$hardcode_libdir_separator" &&
-	     test -n "$hardcode_libdirs"; then
-	    libdir="$hardcode_libdirs"
-	    if test -n "$hardcode_libdir_flag_spec_ld"; then
-	      case $archive_cmds in
-	      *\$LD*) eval dep_rpath=\"$hardcode_libdir_flag_spec_ld\" ;;
-	      *)      eval dep_rpath=\"$hardcode_libdir_flag_spec\" ;;
-	      esac
-	    else
-	      eval dep_rpath=\"$hardcode_libdir_flag_spec\"
-	    fi
-	  fi
-	  if test -n "$runpath_var" && test -n "$perm_rpath"; then
-	    # We should set the runpath_var.
-	    rpath=
-	    for dir in $perm_rpath; do
-	      rpath="$rpath$dir:"
-	    done
-	    eval "$runpath_var='$rpath\$$runpath_var'; export $runpath_var"
-	  fi
-	  test -n "$dep_rpath" && deplibs="$dep_rpath $deplibs"
-	fi
-
-	shlibpath="$finalize_shlibpath"
-	test "$mode" != relink && shlibpath="$compile_shlibpath$shlibpath"
-	if test -n "$shlibpath"; then
-	  eval "$shlibpath_var='$shlibpath\$$shlibpath_var'; export $shlibpath_var"
-	fi
-
-	# Get the real and link names of the library.
-	eval shared_ext=\"$shrext_cmds\"
-	eval library_names=\"$library_names_spec\"
-	set dummy $library_names
-	realname="$2"
-	shift; shift
-
-	if test -n "$soname_spec"; then
-	  eval soname=\"$soname_spec\"
-	else
-	  soname="$realname"
-	fi
-	if test -z "$dlname"; then
-	  dlname=$soname
-	fi
-
-	lib="$output_objdir/$realname"
-	linknames=
-	for link
-	do
-	  linknames="$linknames $link"
-	done
-
-	# Use standard objects if they are pic
-	test -z "$pic_flag" && libobjs=`$echo "X$libobjs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
-
-	# Prepare the list of exported symbols
-	if test -z "$export_symbols"; then
-	  if test "$always_export_symbols" = yes || test -n "$export_symbols_regex"; then
-	    $show "generating symbol list for \`$libname.la'"
-	    export_symbols="$output_objdir/$libname.exp"
-	    $run $rm $export_symbols
-	    cmds=$export_symbols_cmds
-	    save_ifs="$IFS"; IFS='~'
-	    for cmd in $cmds; do
-	      IFS="$save_ifs"
-	      eval cmd=\"$cmd\"
-	      if len=`expr "X$cmd" : ".*"` &&
-	       test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then
-	        $show "$cmd"
-	        $run eval "$cmd" || exit $?
-	        skipped_export=false
-	      else
-	        # The command line is too long to execute in one step.
-	        $show "using reloadable object file for export list..."
-	        skipped_export=:
-		# Break out early, otherwise skipped_export may be
-		# set to false by a later but shorter cmd.
-		break
-	      fi
-	    done
-	    IFS="$save_ifs"
-	    if test -n "$export_symbols_regex"; then
-	      $show "$EGREP -e \"$export_symbols_regex\" \"$export_symbols\" > \"${export_symbols}T\""
-	      $run eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"'
-	      $show "$mv \"${export_symbols}T\" \"$export_symbols\""
-	      $run eval '$mv "${export_symbols}T" "$export_symbols"'
-	    fi
-	  fi
-	fi
-
-	if test -n "$export_symbols" && test -n "$include_expsyms"; then
-	  $run eval '$echo "X$include_expsyms" | $SP2NL >> "$export_symbols"'
-	fi
-
-	tmp_deplibs=
-	for test_deplib in $deplibs; do
-		case " $convenience " in
-		*" $test_deplib "*) ;;
-		*)
-			tmp_deplibs="$tmp_deplibs $test_deplib"
-			;;
-		esac
-	done
-	deplibs="$tmp_deplibs"
-
-	if test -n "$convenience"; then
-	  if test -n "$whole_archive_flag_spec"; then
-	    save_libobjs=$libobjs
-	    eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
-	  else
-	    gentop="$output_objdir/${outputname}x"
-	    generated="$generated $gentop"
-
-	    func_extract_archives $gentop $convenience
-	    libobjs="$libobjs $func_extract_archives_result"
-	  fi
-	fi
-	
-	if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then
-	  eval flag=\"$thread_safe_flag_spec\"
-	  linker_flags="$linker_flags $flag"
-	fi
-
-	# Make a backup of the uninstalled library when relinking
-	if test "$mode" = relink; then
-	  $run eval '(cd $output_objdir && $rm ${realname}U && $mv $realname ${realname}U)' || exit $?
-	fi
-
-	# Do each of the archive commands.
-	if test "$module" = yes && test -n "$module_cmds" ; then
-	  if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then
-	    eval test_cmds=\"$module_expsym_cmds\"
-	    cmds=$module_expsym_cmds
-	  else
-	    eval test_cmds=\"$module_cmds\"
-	    cmds=$module_cmds
-	  fi
-	else
-	if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
-	  eval test_cmds=\"$archive_expsym_cmds\"
-	  cmds=$archive_expsym_cmds
-	else
-	  eval test_cmds=\"$archive_cmds\"
-	  cmds=$archive_cmds
-	  fi
-	fi
-
-	if test "X$skipped_export" != "X:" &&
-	   len=`expr "X$test_cmds" : ".*" 2>/dev/null` &&
-	   test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then
-	  :
-	else
-	  # The command line is too long to link in one step, link piecewise.
-	  $echo "creating reloadable object files..."
-
-	  # Save the value of $output and $libobjs because we want to
-	  # use them later.  If we have whole_archive_flag_spec, we
-	  # want to use save_libobjs as it was before
-	  # whole_archive_flag_spec was expanded, because we can't
-	  # assume the linker understands whole_archive_flag_spec.
-	  # This may have to be revisited, in case too many
-	  # convenience libraries get linked in and end up exceeding
-	  # the spec.
-	  if test -z "$convenience" || test -z "$whole_archive_flag_spec"; then
-	    save_libobjs=$libobjs
-	  fi
-	  save_output=$output
-	  output_la=`$echo "X$output" | $Xsed -e "$basename"`
-
-	  # Clear the reloadable object creation command queue and
-	  # initialize k to one.
-	  test_cmds=
-	  concat_cmds=
-	  objlist=
-	  delfiles=
-	  last_robj=
-	  k=1
-	  output=$output_objdir/$output_la-${k}.$objext
-	  # Loop over the list of objects to be linked.
-	  for obj in $save_libobjs
-	  do
-	    eval test_cmds=\"$reload_cmds $objlist $last_robj\"
-	    if test "X$objlist" = X ||
-	       { len=`expr "X$test_cmds" : ".*" 2>/dev/null` &&
-		 test "$len" -le "$max_cmd_len"; }; then
-	      objlist="$objlist $obj"
-	    else
-	      # The command $test_cmds is almost too long, add a
-	      # command to the queue.
-	      if test "$k" -eq 1 ; then
-		# The first file doesn't have a previous command to add.
-		eval concat_cmds=\"$reload_cmds $objlist $last_robj\"
-	      else
-		# All subsequent reloadable object files will link in
-		# the last one created.
-		eval concat_cmds=\"\$concat_cmds~$reload_cmds $objlist $last_robj\"
-	      fi
-	      last_robj=$output_objdir/$output_la-${k}.$objext
-	      k=`expr $k + 1`
-	      output=$output_objdir/$output_la-${k}.$objext
-	      objlist=$obj
-	      len=1
-	    fi
-	  done
-	  # Handle the remaining objects by creating one last
-	  # reloadable object file.  All subsequent reloadable object
-	  # files will link in the last one created.
-	  test -z "$concat_cmds" || concat_cmds=$concat_cmds~
-	  eval concat_cmds=\"\${concat_cmds}$reload_cmds $objlist $last_robj\"
-
-	  if ${skipped_export-false}; then
-	    $show "generating symbol list for \`$libname.la'"
-	    export_symbols="$output_objdir/$libname.exp"
-	    $run $rm $export_symbols
-	    libobjs=$output
-	    # Append the command to create the export file.
-	    eval concat_cmds=\"\$concat_cmds~$export_symbols_cmds\"
-          fi
-
-	  # Set up a command to remove the reloadable object files
-	  # after they are used.
-	  i=0
-	  while test "$i" -lt "$k"
-	  do
-	    i=`expr $i + 1`
-	    delfiles="$delfiles $output_objdir/$output_la-${i}.$objext"
-	  done
-
-	  $echo "creating a temporary reloadable object file: $output"
-
-	  # Loop through the commands generated above and execute them.
-	  save_ifs="$IFS"; IFS='~'
-	  for cmd in $concat_cmds; do
-	    IFS="$save_ifs"
-	    $show "$cmd"
-	    $run eval "$cmd" || exit $?
-	  done
-	  IFS="$save_ifs"
-
-	  libobjs=$output
-	  # Restore the value of output.
-	  output=$save_output
-
-	  if test -n "$convenience" && test -n "$whole_archive_flag_spec"; then
-	    eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
-	  fi
-	  # Expand the library linking commands again to reset the
-	  # value of $libobjs for piecewise linking.
-
-	  # Do each of the archive commands.
-	  if test "$module" = yes && test -n "$module_cmds" ; then
-	    if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then
-	      cmds=$module_expsym_cmds
-	    else
-	      cmds=$module_cmds
-	    fi
-	  else
-	  if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
-	    cmds=$archive_expsym_cmds
-	  else
-	    cmds=$archive_cmds
-	    fi
-	  fi
-
-	  # Append the command to remove the reloadable object files
-	  # to the just-reset $cmds.
-	  eval cmds=\"\$cmds~\$rm $delfiles\"
-	fi
-	save_ifs="$IFS"; IFS='~'
-	for cmd in $cmds; do
-	  IFS="$save_ifs"
-	  eval cmd=\"$cmd\"
-	  $show "$cmd"
-	  $run eval "$cmd" || {
-	    lt_exit=$?
-
-	    # Restore the uninstalled library and exit
-	    if test "$mode" = relink; then
-	      $run eval '(cd $output_objdir && $rm ${realname}T && $mv ${realname}U $realname)'
-	    fi
-
-	    exit $lt_exit
-	  }
-	done
-	IFS="$save_ifs"
-
-	# Restore the uninstalled library and exit
-	if test "$mode" = relink; then
-	  $run eval '(cd $output_objdir && $rm ${realname}T && $mv $realname ${realname}T && $mv "$realname"U $realname)' || exit $?
-
-	  if test -n "$convenience"; then
-	    if test -z "$whole_archive_flag_spec"; then
-	      $show "${rm}r $gentop"
-	      $run ${rm}r "$gentop"
-	    fi
-	  fi
-
-	  exit $EXIT_SUCCESS
-	fi
-
-	# Create links to the real library.
-	for linkname in $linknames; do
-	  if test "$realname" != "$linkname"; then
-	    $show "(cd $output_objdir && $rm $linkname && $LN_S $realname $linkname)"
-	    $run eval '(cd $output_objdir && $rm $linkname && $LN_S $realname $linkname)' || exit $?
-	  fi
-	done
-
-	# If -module or -export-dynamic was specified, set the dlname.
-	if test "$module" = yes || test "$export_dynamic" = yes; then
-	  # On all known operating systems, these are identical.
-	  dlname="$soname"
-	fi
-      fi
-      ;;
-
-    obj)
-      if test -n "$deplibs"; then
-	$echo "$modename: warning: \`-l' and \`-L' are ignored for objects" 1>&2
-      fi
-
-      if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
-	$echo "$modename: warning: \`-dlopen' is ignored for objects" 1>&2
-      fi
-
-      if test -n "$rpath"; then
-	$echo "$modename: warning: \`-rpath' is ignored for objects" 1>&2
-      fi
-
-      if test -n "$xrpath"; then
-	$echo "$modename: warning: \`-R' is ignored for objects" 1>&2
-      fi
-
-      if test -n "$vinfo"; then
-	$echo "$modename: warning: \`-version-info' is ignored for objects" 1>&2
-      fi
-
-      if test -n "$release"; then
-	$echo "$modename: warning: \`-release' is ignored for objects" 1>&2
-      fi
-
-      case $output in
-      *.lo)
-	if test -n "$objs$old_deplibs"; then
-	  $echo "$modename: cannot build library object \`$output' from non-libtool objects" 1>&2
-	  exit $EXIT_FAILURE
-	fi
-	libobj="$output"
-	obj=`$echo "X$output" | $Xsed -e "$lo2o"`
-	;;
-      *)
-	libobj=
-	obj="$output"
-	;;
-      esac
-
-      # Delete the old objects.
-      $run $rm $obj $libobj
-
-      # Objects from convenience libraries.  This assumes
-      # single-version convenience libraries.  Whenever we create
-      # different ones for PIC/non-PIC, this we'll have to duplicate
-      # the extraction.
-      reload_conv_objs=
-      gentop=
-      # reload_cmds runs $LD directly, so let us get rid of
-      # -Wl from whole_archive_flag_spec and hope we can get by with
-      # turning comma into space..
-      wl=
-
-      if test -n "$convenience"; then
-	if test -n "$whole_archive_flag_spec"; then
-	  eval tmp_whole_archive_flags=\"$whole_archive_flag_spec\"
-	  reload_conv_objs=$reload_objs\ `$echo "X$tmp_whole_archive_flags" | $Xsed -e 's|,| |g'`
-	else
-	  gentop="$output_objdir/${obj}x"
-	  generated="$generated $gentop"
-
-	  func_extract_archives $gentop $convenience
-	  reload_conv_objs="$reload_objs $func_extract_archives_result"
-	fi
-      fi
-
-      # Create the old-style object.
-      reload_objs="$objs$old_deplibs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}$'/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test
-
-      output="$obj"
-      cmds=$reload_cmds
-      save_ifs="$IFS"; IFS='~'
-      for cmd in $cmds; do
-	IFS="$save_ifs"
-	eval cmd=\"$cmd\"
-	$show "$cmd"
-	$run eval "$cmd" || exit $?
-      done
-      IFS="$save_ifs"
-
-      # Exit if we aren't doing a library object file.
-      if test -z "$libobj"; then
-	if test -n "$gentop"; then
-	  $show "${rm}r $gentop"
-	  $run ${rm}r $gentop
-	fi
-
-	exit $EXIT_SUCCESS
-      fi
-
-      if test "$build_libtool_libs" != yes; then
-	if test -n "$gentop"; then
-	  $show "${rm}r $gentop"
-	  $run ${rm}r $gentop
-	fi
-
-	# Create an invalid libtool object if no PIC, so that we don't
-	# accidentally link it into a program.
-	# $show "echo timestamp > $libobj"
-	# $run eval "echo timestamp > $libobj" || exit $?
-	exit $EXIT_SUCCESS
-      fi
-
-      if test -n "$pic_flag" || test "$pic_mode" != default; then
-	# Only do commands if we really have different PIC objects.
-	reload_objs="$libobjs $reload_conv_objs"
-	output="$libobj"
-	cmds=$reload_cmds
-	save_ifs="$IFS"; IFS='~'
-	for cmd in $cmds; do
-	  IFS="$save_ifs"
-	  eval cmd=\"$cmd\"
-	  $show "$cmd"
-	  $run eval "$cmd" || exit $?
-	done
-	IFS="$save_ifs"
-      fi
-
-      if test -n "$gentop"; then
-	$show "${rm}r $gentop"
-	$run ${rm}r $gentop
-      fi
-
-      exit $EXIT_SUCCESS
-      ;;
-
-    prog)
-      case $host in
-	*cygwin*) output=`$echo $output | ${SED} -e 's,.exe$,,;s,$,.exe,'` ;;
-      esac
-      if test -n "$vinfo"; then
-	$echo "$modename: warning: \`-version-info' is ignored for programs" 1>&2
-      fi
-
-      if test -n "$release"; then
-	$echo "$modename: warning: \`-release' is ignored for programs" 1>&2
-      fi
-
-      if test "$preload" = yes; then
-	if test "$dlopen_support" = unknown && test "$dlopen_self" = unknown &&
-	   test "$dlopen_self_static" = unknown; then
-	  $echo "$modename: warning: \`AC_LIBTOOL_DLOPEN' not used. Assuming no dlopen support."
-	fi
-      fi
-
-      case $host in
-      *-*-rhapsody* | *-*-darwin1.[012])
-	# On Rhapsody replace the C library is the System framework
-	compile_deplibs=`$echo "X $compile_deplibs" | $Xsed -e 's/ -lc / -framework System /'`
-	finalize_deplibs=`$echo "X $finalize_deplibs" | $Xsed -e 's/ -lc / -framework System /'`
-	;;
-      esac
-
-      case $host in
-      *darwin*)
-        # Don't allow lazy linking, it breaks C++ global constructors
-        if test "$tagname" = CXX ; then
-        compile_command="$compile_command ${wl}-bind_at_load"
-        finalize_command="$finalize_command ${wl}-bind_at_load"
-        fi
-        ;;
-      esac
-
-
-      # move library search paths that coincide with paths to not yet
-      # installed libraries to the beginning of the library search list
-      new_libs=
-      for path in $notinst_path; do
-	case " $new_libs " in
-	*" -L$path/$objdir "*) ;;
-	*)
-	  case " $compile_deplibs " in
-	  *" -L$path/$objdir "*)
-	    new_libs="$new_libs -L$path/$objdir" ;;
-	  esac
-	  ;;
-	esac
-      done
-      for deplib in $compile_deplibs; do
-	case $deplib in
-	-L*)
-	  case " $new_libs " in
-	  *" $deplib "*) ;;
-	  *) new_libs="$new_libs $deplib" ;;
-	  esac
-	  ;;
-	*) new_libs="$new_libs $deplib" ;;
-	esac
-      done
-      compile_deplibs="$new_libs"
-
-
-      compile_command="$compile_command $compile_deplibs"
-      finalize_command="$finalize_command $finalize_deplibs"
-
-      if test -n "$rpath$xrpath"; then
-	# If the user specified any rpath flags, then add them.
-	for libdir in $rpath $xrpath; do
-	  # This is the magic to use -rpath.
-	  case "$finalize_rpath " in
-	  *" $libdir "*) ;;
-	  *) finalize_rpath="$finalize_rpath $libdir" ;;
-	  esac
-	done
-      fi
-
-      # Now hardcode the library paths
-      rpath=
-      hardcode_libdirs=
-      for libdir in $compile_rpath $finalize_rpath; do
-	if test -n "$hardcode_libdir_flag_spec"; then
-	  if test -n "$hardcode_libdir_separator"; then
-	    if test -z "$hardcode_libdirs"; then
-	      hardcode_libdirs="$libdir"
-	    else
-	      # Just accumulate the unique libdirs.
-	      case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
-	      *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
-		;;
-	      *)
-		hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
-		;;
-	      esac
-	    fi
-	  else
-	    eval flag=\"$hardcode_libdir_flag_spec\"
-	    rpath="$rpath $flag"
-	  fi
-	elif test -n "$runpath_var"; then
-	  case "$perm_rpath " in
-	  *" $libdir "*) ;;
-	  *) perm_rpath="$perm_rpath $libdir" ;;
-	  esac
-	fi
-	case $host in
-	*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
-	  testbindir=`$echo "X$libdir" | $Xsed -e 's*/lib$*/bin*'`
-	  case :$dllsearchpath: in
-	  *":$libdir:"*) ;;
-	  *) dllsearchpath="$dllsearchpath:$libdir";;
-	  esac
-	  case :$dllsearchpath: in
-	  *":$testbindir:"*) ;;
-	  *) dllsearchpath="$dllsearchpath:$testbindir";;
-	  esac
-	  ;;
-	esac
-      done
-      # Substitute the hardcoded libdirs into the rpath.
-      if test -n "$hardcode_libdir_separator" &&
-	 test -n "$hardcode_libdirs"; then
-	libdir="$hardcode_libdirs"
-	eval rpath=\" $hardcode_libdir_flag_spec\"
-      fi
-      compile_rpath="$rpath"
-
-      rpath=
-      hardcode_libdirs=
-      for libdir in $finalize_rpath; do
-	if test -n "$hardcode_libdir_flag_spec"; then
-	  if test -n "$hardcode_libdir_separator"; then
-	    if test -z "$hardcode_libdirs"; then
-	      hardcode_libdirs="$libdir"
-	    else
-	      # Just accumulate the unique libdirs.
-	      case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
-	      *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
-		;;
-	      *)
-		hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
-		;;
-	      esac
-	    fi
-	  else
-	    eval flag=\"$hardcode_libdir_flag_spec\"
-	    rpath="$rpath $flag"
-	  fi
-	elif test -n "$runpath_var"; then
-	  case "$finalize_perm_rpath " in
-	  *" $libdir "*) ;;
-	  *) finalize_perm_rpath="$finalize_perm_rpath $libdir" ;;
-	  esac
-	fi
-      done
-      # Substitute the hardcoded libdirs into the rpath.
-      if test -n "$hardcode_libdir_separator" &&
-	 test -n "$hardcode_libdirs"; then
-	libdir="$hardcode_libdirs"
-	eval rpath=\" $hardcode_libdir_flag_spec\"
-      fi
-      finalize_rpath="$rpath"
-
-      if test -n "$libobjs" && test "$build_old_libs" = yes; then
-	# Transform all the library objects into standard objects.
-	compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
-	finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
-      fi
-
-      dlsyms=
-      if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
-	if test -n "$NM" && test -n "$global_symbol_pipe"; then
-	  dlsyms="${outputname}S.c"
-	else
-	  $echo "$modename: not configured to extract global symbols from dlpreopened files" 1>&2
-	fi
-      fi
-
-      if test -n "$dlsyms"; then
-	case $dlsyms in
-	"") ;;
-	*.c)
-	  # Discover the nlist of each of the dlfiles.
-	  nlist="$output_objdir/${outputname}.nm"
-
-	  $show "$rm $nlist ${nlist}S ${nlist}T"
-	  $run $rm "$nlist" "${nlist}S" "${nlist}T"
-
-	  # Parse the name list into a source file.
-	  $show "creating $output_objdir/$dlsyms"
-
-	  test -z "$run" && $echo > "$output_objdir/$dlsyms" "\
-/* $dlsyms - symbol resolution table for \`$outputname' dlsym emulation. */
-/* Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP */
-
-#ifdef __cplusplus
-extern \"C\" {
-#endif
-
-/* Prevent the only kind of declaration conflicts we can make. */
-#define lt_preloaded_symbols some_other_symbol
-
-/* External symbol declarations for the compiler. */\
-"
-
-	  if test "$dlself" = yes; then
-	    $show "generating symbol list for \`$output'"
-
-	    test -z "$run" && $echo ': @PROGRAM@ ' > "$nlist"
-
-	    # Add our own program objects to the symbol list.
-	    progfiles=`$echo "X$objs$old_deplibs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
-	    for arg in $progfiles; do
-	      $show "extracting global C symbols from \`$arg'"
-	      $run eval "$NM $arg | $global_symbol_pipe >> '$nlist'"
-	    done
-
-	    if test -n "$exclude_expsyms"; then
-	      $run eval '$EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T'
-	      $run eval '$mv "$nlist"T "$nlist"'
-	    fi
-
-	    if test -n "$export_symbols_regex"; then
-	      $run eval '$EGREP -e "$export_symbols_regex" "$nlist" > "$nlist"T'
-	      $run eval '$mv "$nlist"T "$nlist"'
-	    fi
-
-	    # Prepare the list of exported symbols
-	    if test -z "$export_symbols"; then
-	      export_symbols="$output_objdir/$outputname.exp"
-	      $run $rm $export_symbols
-	      $run eval "${SED} -n -e '/^: @PROGRAM@ $/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"'
-              case $host in
-              *cygwin* | *mingw* )
-	        $run eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
-		$run eval 'cat "$export_symbols" >> "$output_objdir/$outputname.def"'
-                ;;
-              esac
-	    else
-	      $run eval "${SED} -e 's/\([].[*^$]\)/\\\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"'
-	      $run eval 'grep -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T'
-	      $run eval 'mv "$nlist"T "$nlist"'
-              case $host in
-              *cygwin* | *mingw* )
-	        $run eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
-		$run eval 'cat "$nlist" >> "$output_objdir/$outputname.def"'
-                ;;
-              esac
-	    fi
-	  fi
-
-	  for arg in $dlprefiles; do
-	    $show "extracting global C symbols from \`$arg'"
-	    name=`$echo "$arg" | ${SED} -e 's%^.*/%%'`
-	    $run eval '$echo ": $name " >> "$nlist"'
-	    $run eval "$NM $arg | $global_symbol_pipe >> '$nlist'"
-	  done
-
-	  if test -z "$run"; then
-	    # Make sure we have at least an empty file.
-	    test -f "$nlist" || : > "$nlist"
-
-	    if test -n "$exclude_expsyms"; then
-	      $EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T
-	      $mv "$nlist"T "$nlist"
-	    fi
-
-	    # Try sorting and uniquifying the output.
-	    if grep -v "^: " < "$nlist" |
-		if sort -k 3 </dev/null >/dev/null 2>&1; then
-		  sort -k 3
-		else
-		  sort +2
-		fi |
-		uniq > "$nlist"S; then
-	      :
-	    else
-	      grep -v "^: " < "$nlist" > "$nlist"S
-	    fi
-
-	    if test -f "$nlist"S; then
-	      eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$dlsyms"'
-	    else
-	      $echo '/* NONE */' >> "$output_objdir/$dlsyms"
-	    fi
-
-	    $echo >> "$output_objdir/$dlsyms" "\
-
-#undef lt_preloaded_symbols
-
-#if defined (__STDC__) && __STDC__
-# define lt_ptr void *
-#else
-# define lt_ptr char *
-# define const
-#endif
-
-/* The mapping between symbol names and symbols. */
-"
-
-	    case $host in
-	    *cygwin* | *mingw* )
-	  $echo >> "$output_objdir/$dlsyms" "\
-/* DATA imports from DLLs on WIN32 can't be const, because
-   runtime relocations are performed -- see ld's documentation
-   on pseudo-relocs */
-struct {
-"
-	      ;;
-	    * )
-	  $echo >> "$output_objdir/$dlsyms" "\
-const struct {
-"
-	      ;;
-	    esac
-
-
-	  $echo >> "$output_objdir/$dlsyms" "\
-  const char *name;
-  lt_ptr address;
-}
-lt_preloaded_symbols[] =
-{\
-"
-
-	    eval "$global_symbol_to_c_name_address" < "$nlist" >> "$output_objdir/$dlsyms"
-
-	    $echo >> "$output_objdir/$dlsyms" "\
-  {0, (lt_ptr) 0}
-};
-
-/* This works around a problem in FreeBSD linker */
-#ifdef FREEBSD_WORKAROUND
-static const void *lt_preloaded_setup() {
-  return lt_preloaded_symbols;
-}
-#endif
-
-#ifdef __cplusplus
-}
-#endif\
-"
-	  fi
-
-	  pic_flag_for_symtable=
-	  case $host in
-	  # compiling the symbol table file with pic_flag works around
-	  # a FreeBSD bug that causes programs to crash when -lm is
-	  # linked before any other PIC object.  But we must not use
-	  # pic_flag when linking with -static.  The problem exists in
-	  # FreeBSD 2.2.6 and is fixed in FreeBSD 3.1.
-	  *-*-freebsd2*|*-*-freebsd3.0*|*-*-freebsdelf3.0*)
-	    case "$compile_command " in
-	    *" -static "*) ;;
-	    *) pic_flag_for_symtable=" $pic_flag -DFREEBSD_WORKAROUND";;
-	    esac;;
-	  *-*-hpux*)
-	    case "$compile_command " in
-	    *" -static "*) ;;
-	    *) pic_flag_for_symtable=" $pic_flag";;
-	    esac
-	  esac
-
-	  # Now compile the dynamic symbol file.
-	  $show "(cd $output_objdir && $LTCC  $LTCFLAGS -c$no_builtin_flag$pic_flag_for_symtable \"$dlsyms\")"
-	  $run eval '(cd $output_objdir && $LTCC  $LTCFLAGS -c$no_builtin_flag$pic_flag_for_symtable "$dlsyms")' || exit $?
-
-	  # Clean up the generated files.
-	  $show "$rm $output_objdir/$dlsyms $nlist ${nlist}S ${nlist}T"
-	  $run $rm "$output_objdir/$dlsyms" "$nlist" "${nlist}S" "${nlist}T"
-
-	  # Transform the symbol file into the correct name.
-          case $host in
-          *cygwin* | *mingw* )
-            if test -f "$output_objdir/${outputname}.def" ; then
-              compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}.def $output_objdir/${outputname}S.${objext}%" | $NL2SP`
-              finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}.def $output_objdir/${outputname}S.${objext}%" | $NL2SP`
-            else
-              compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%" | $NL2SP`
-              finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%" | $NL2SP`
-             fi
-            ;;
-          * )
-            compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%" | $NL2SP`
-            finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%" | $NL2SP`
-            ;;
-          esac
-	  ;;
-	*)
-	  $echo "$modename: unknown suffix for \`$dlsyms'" 1>&2
-	  exit $EXIT_FAILURE
-	  ;;
-	esac
-      else
-	# We keep going just in case the user didn't refer to
-	# lt_preloaded_symbols.  The linker will fail if global_symbol_pipe
-	# really was required.
-
-	# Nullify the symbol file.
-	compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "s% @SYMFILE@%%" | $NL2SP`
-	finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "s% @SYMFILE@%%" | $NL2SP`
-      fi
-
-      if test "$need_relink" = no || test "$build_libtool_libs" != yes; then
-	# Replace the output file specification.
-	compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e 's%@OUTPUT@%'"$output"'%g' | $NL2SP`
-	link_command="$compile_command$compile_rpath"
-
-	# We have no uninstalled library dependencies, so finalize right now.
-	$show "$link_command"
-	$run eval "$link_command"
-	exit_status=$?
-
-	# Delete the generated files.
-	if test -n "$dlsyms"; then
-	  $show "$rm $output_objdir/${outputname}S.${objext}"
-	  $run $rm "$output_objdir/${outputname}S.${objext}"
-	fi
-
-	exit $exit_status
-      fi
-
-      if test -n "$shlibpath_var"; then
-	# We should set the shlibpath_var
-	rpath=
-	for dir in $temp_rpath; do
-	  case $dir in
-	  [\\/]* | [A-Za-z]:[\\/]*)
-	    # Absolute path.
-	    rpath="$rpath$dir:"
-	    ;;
-	  *)
-	    # Relative path: add a thisdir entry.
-	    rpath="$rpath\$thisdir/$dir:"
-	    ;;
-	  esac
-	done
-	temp_rpath="$rpath"
-      fi
-
-      if test -n "$compile_shlibpath$finalize_shlibpath"; then
-	compile_command="$shlibpath_var=\"$compile_shlibpath$finalize_shlibpath\$$shlibpath_var\" $compile_command"
-      fi
-      if test -n "$finalize_shlibpath"; then
-	finalize_command="$shlibpath_var=\"$finalize_shlibpath\$$shlibpath_var\" $finalize_command"
-      fi
-
-      compile_var=
-      finalize_var=
-      if test -n "$runpath_var"; then
-	if test -n "$perm_rpath"; then
-	  # We should set the runpath_var.
-	  rpath=
-	  for dir in $perm_rpath; do
-	    rpath="$rpath$dir:"
-	  done
-	  compile_var="$runpath_var=\"$rpath\$$runpath_var\" "
-	fi
-	if test -n "$finalize_perm_rpath"; then
-	  # We should set the runpath_var.
-	  rpath=
-	  for dir in $finalize_perm_rpath; do
-	    rpath="$rpath$dir:"
-	  done
-	  finalize_var="$runpath_var=\"$rpath\$$runpath_var\" "
-	fi
-      fi
-
-      if test "$no_install" = yes; then
-	# We don't need to create a wrapper script.
-	link_command="$compile_var$compile_command$compile_rpath"
-	# Replace the output file specification.
-	link_command=`$echo "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'`
-	# Delete the old output file.
-	$run $rm $output
-	# Link the executable and exit
-	$show "$link_command"
-	$run eval "$link_command" || exit $?
-	exit $EXIT_SUCCESS
-      fi
-
-      if test "$hardcode_action" = relink; then
-	# Fast installation is not supported
-	link_command="$compile_var$compile_command$compile_rpath"
-	relink_command="$finalize_var$finalize_command$finalize_rpath"
-
-	$echo "$modename: warning: this platform does not like uninstalled shared libraries" 1>&2
-	$echo "$modename: \`$output' will be relinked during installation" 1>&2
-      else
-	if test "$fast_install" != no; then
-	  link_command="$finalize_var$compile_command$finalize_rpath"
-	  if test "$fast_install" = yes; then
-	    relink_command=`$echo "X$compile_var$compile_command$compile_rpath" | $SP2NL | $Xsed -e 's%@OUTPUT@%\$progdir/\$file%g' | $NL2SP`
-	  else
-	    # fast_install is set to needless
-	    relink_command=
-	  fi
-	else
-	  link_command="$compile_var$compile_command$compile_rpath"
-	  relink_command="$finalize_var$finalize_command$finalize_rpath"
-	fi
-      fi
-
-      # Replace the output file specification.
-      link_command=`$echo "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'`
-
-      # Delete the old output files.
-      $run $rm $output $output_objdir/$outputname $output_objdir/lt-$outputname
-
-      $show "$link_command"
-      $run eval "$link_command" || exit $?
-
-      # Now create the wrapper script.
-      $show "creating $output"
-
-      # Quote the relink command for shipping.
-      if test -n "$relink_command"; then
-	# Preserve any variables that may affect compiler behavior
-	for var in $variables_saved_for_relink; do
-	  if eval test -z \"\${$var+set}\"; then
-	    relink_command="{ test -z \"\${$var+set}\" || unset $var || { $var=; export $var; }; }; $relink_command"
-	  elif eval var_value=\$$var; test -z "$var_value"; then
-	    relink_command="$var=; export $var; $relink_command"
-	  else
-	    var_value=`$echo "X$var_value" | $Xsed -e "$sed_quote_subst"`
-	    relink_command="$var=\"$var_value\"; export $var; $relink_command"
-	  fi
-	done
-	relink_command="(cd `pwd`; $relink_command)"
-	relink_command=`$echo "X$relink_command" | $SP2NL | $Xsed -e "$sed_quote_subst" | $NL2SP`
-      fi
-
-      # Quote $echo for shipping.
-      if test "X$echo" = "X$SHELL $progpath --fallback-echo"; then
-	case $progpath in
-	[\\/]* | [A-Za-z]:[\\/]*) qecho="$SHELL $progpath --fallback-echo";;
-	*) qecho="$SHELL `pwd`/$progpath --fallback-echo";;
-	esac
-	qecho=`$echo "X$qecho" | $Xsed -e "$sed_quote_subst"`
-      else
-	qecho=`$echo "X$echo" | $Xsed -e "$sed_quote_subst"`
-      fi
-
-      # Only actually do things if our run command is non-null.
-      if test -z "$run"; then
-	# win32 will think the script is a binary if it has
-	# a .exe suffix, so we strip it off here.
-	case $output in
-	  *.exe) output=`$echo $output|${SED} 's,.exe$,,'` ;;
-	esac
-	# test for cygwin because mv fails w/o .exe extensions
-	case $host in
-	  *cygwin*)
-	    exeext=.exe
-	    outputname=`$echo $outputname|${SED} 's,.exe$,,'` ;;
-	  *) exeext= ;;
-	esac
-	case $host in
-	  *cygwin* | *mingw* )
-            output_name=`basename $output`
-            output_path=`dirname $output`
-            cwrappersource="$output_path/$objdir/lt-$output_name.c"
-            cwrapper="$output_path/$output_name.exe"
-            $rm $cwrappersource $cwrapper
-            trap "$rm $cwrappersource $cwrapper; exit $EXIT_FAILURE" 1 2 15
-
-	    cat > $cwrappersource <<EOF
-
-/* $cwrappersource - temporary wrapper executable for $objdir/$outputname
-   Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP
-
-   The $output program cannot be directly executed until all the libtool
-   libraries that it depends on are installed.
-
-   This wrapper executable should never be moved out of the build directory.
-   If it is, it will not operate correctly.
-
-   Currently, it simply execs the wrapper *script* "/bin/sh $output",
-   but could eventually absorb all of the scripts functionality and
-   exec $objdir/$outputname directly.
-*/
-EOF
-	    cat >> $cwrappersource<<"EOF"
-#include <stdio.h>
-#include <stdlib.h>
-#include <unistd.h>
-#include <malloc.h>
-#include <stdarg.h>
-#include <assert.h>
-#include <string.h>
-#include <ctype.h>
-#include <sys/stat.h>
-
-#if defined(PATH_MAX)
-# define LT_PATHMAX PATH_MAX
-#elif defined(MAXPATHLEN)
-# define LT_PATHMAX MAXPATHLEN
-#else
-# define LT_PATHMAX 1024
-#endif
-
-#ifndef DIR_SEPARATOR
-# define DIR_SEPARATOR '/'
-# define PATH_SEPARATOR ':'
-#endif
-
-#if defined (_WIN32) || defined (__MSDOS__) || defined (__DJGPP__) || \
-  defined (__OS2__)
-# define HAVE_DOS_BASED_FILE_SYSTEM
-# ifndef DIR_SEPARATOR_2
-#  define DIR_SEPARATOR_2 '\\'
-# endif
-# ifndef PATH_SEPARATOR_2
-#  define PATH_SEPARATOR_2 ';'
-# endif
-#endif
-
-#ifndef DIR_SEPARATOR_2
-# define IS_DIR_SEPARATOR(ch) ((ch) == DIR_SEPARATOR)
-#else /* DIR_SEPARATOR_2 */
-# define IS_DIR_SEPARATOR(ch) \
-        (((ch) == DIR_SEPARATOR) || ((ch) == DIR_SEPARATOR_2))
-#endif /* DIR_SEPARATOR_2 */
-
-#ifndef PATH_SEPARATOR_2
-# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR)
-#else /* PATH_SEPARATOR_2 */
-# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR_2)
-#endif /* PATH_SEPARATOR_2 */
-
-#define XMALLOC(type, num)      ((type *) xmalloc ((num) * sizeof(type)))
-#define XFREE(stale) do { \
-  if (stale) { free ((void *) stale); stale = 0; } \
-} while (0)
-
-/* -DDEBUG is fairly common in CFLAGS.  */
-#undef DEBUG
-#if defined DEBUGWRAPPER
-# define DEBUG(format, ...) fprintf(stderr, format, __VA_ARGS__)
-#else
-# define DEBUG(format, ...)
-#endif
-
-const char *program_name = NULL;
-
-void * xmalloc (size_t num);
-char * xstrdup (const char *string);
-const char * base_name (const char *name);
-char * find_executable(const char *wrapper);
-int    check_executable(const char *path);
-char * strendzap(char *str, const char *pat);
-void lt_fatal (const char *message, ...);
-
-int
-main (int argc, char *argv[])
-{
-  char **newargz;
-  int i;
-
-  program_name = (char *) xstrdup (base_name (argv[0]));
-  DEBUG("(main) argv[0]      : %s\n",argv[0]);
-  DEBUG("(main) program_name : %s\n",program_name);
-  newargz = XMALLOC(char *, argc+2);
-EOF
-
-            cat >> $cwrappersource <<EOF
-  newargz[0] = (char *) xstrdup("$SHELL");
-EOF
-
-            cat >> $cwrappersource <<"EOF"
-  newargz[1] = find_executable(argv[0]);
-  if (newargz[1] == NULL)
-    lt_fatal("Couldn't find %s", argv[0]);
-  DEBUG("(main) found exe at : %s\n",newargz[1]);
-  /* we know the script has the same name, without the .exe */
-  /* so make sure newargz[1] doesn't end in .exe */
-  strendzap(newargz[1],".exe");
-  for (i = 1; i < argc; i++)
-    newargz[i+1] = xstrdup(argv[i]);
-  newargz[argc+1] = NULL;
-
-  for (i=0; i<argc+1; i++)
-  {
-    DEBUG("(main) newargz[%d]   : %s\n",i,newargz[i]);
-    ;
-  }
-
-EOF
-
-            case $host_os in
-              mingw*)
-                cat >> $cwrappersource <<EOF
-  execv("$SHELL",(char const **)newargz);
-EOF
-              ;;
-              *)
-                cat >> $cwrappersource <<EOF
-  execv("$SHELL",newargz);
-EOF
-              ;;
-            esac
-
-            cat >> $cwrappersource <<"EOF"
-  return 127;
-}
-
-void *
-xmalloc (size_t num)
-{
-  void * p = (void *) malloc (num);
-  if (!p)
-    lt_fatal ("Memory exhausted");
-
-  return p;
-}
-
-char *
-xstrdup (const char *string)
-{
-  return string ? strcpy ((char *) xmalloc (strlen (string) + 1), string) : NULL
-;
-}
-
-const char *
-base_name (const char *name)
-{
-  const char *base;
-
-#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
-  /* Skip over the disk name in MSDOS pathnames. */
-  if (isalpha ((unsigned char)name[0]) && name[1] == ':')
-    name += 2;
-#endif
-
-  for (base = name; *name; name++)
-    if (IS_DIR_SEPARATOR (*name))
-      base = name + 1;
-  return base;
-}
-
-int
-check_executable(const char * path)
-{
-  struct stat st;
-
-  DEBUG("(check_executable)  : %s\n", path ? (*path ? path : "EMPTY!") : "NULL!");
-  if ((!path) || (!*path))
-    return 0;
-
-  if ((stat (path, &st) >= 0) &&
-      (
-        /* MinGW & native WIN32 do not support S_IXOTH or S_IXGRP */
-#if defined (S_IXOTH)
-       ((st.st_mode & S_IXOTH) == S_IXOTH) ||
-#endif
-#if defined (S_IXGRP)
-       ((st.st_mode & S_IXGRP) == S_IXGRP) ||
-#endif
-       ((st.st_mode & S_IXUSR) == S_IXUSR))
-      )
-    return 1;
-  else
-    return 0;
-}
-
-/* Searches for the full path of the wrapper.  Returns
-   newly allocated full path name if found, NULL otherwise */
-char *
-find_executable (const char* wrapper)
-{
-  int has_slash = 0;
-  const char* p;
-  const char* p_next;
-  /* static buffer for getcwd */
-  char tmp[LT_PATHMAX + 1];
-  int tmp_len;
-  char* concat_name;
-
-  DEBUG("(find_executable)  : %s\n", wrapper ? (*wrapper ? wrapper : "EMPTY!") : "NULL!");
-
-  if ((wrapper == NULL) || (*wrapper == '\0'))
-    return NULL;
-
-  /* Absolute path? */
-#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
-  if (isalpha ((unsigned char)wrapper[0]) && wrapper[1] == ':')
-  {
-    concat_name = xstrdup (wrapper);
-    if (check_executable(concat_name))
-      return concat_name;
-    XFREE(concat_name);
-  }
-  else
-  {
-#endif
-    if (IS_DIR_SEPARATOR (wrapper[0]))
-    {
-      concat_name = xstrdup (wrapper);
-      if (check_executable(concat_name))
-        return concat_name;
-      XFREE(concat_name);
-    }
-#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
-  }
-#endif
-
-  for (p = wrapper; *p; p++)
-    if (*p == '/')
-    {
-      has_slash = 1;
-      break;
-    }
-  if (!has_slash)
-  {
-    /* no slashes; search PATH */
-    const char* path = getenv ("PATH");
-    if (path != NULL)
-    {
-      for (p = path; *p; p = p_next)
-      {
-        const char* q;
-        size_t p_len;
-        for (q = p; *q; q++)
-          if (IS_PATH_SEPARATOR(*q))
-            break;
-        p_len = q - p;
-        p_next = (*q == '\0' ? q : q + 1);
-        if (p_len == 0)
-        {
-          /* empty path: current directory */
-          if (getcwd (tmp, LT_PATHMAX) == NULL)
-            lt_fatal ("getcwd failed");
-          tmp_len = strlen(tmp);
-          concat_name = XMALLOC(char, tmp_len + 1 + strlen(wrapper) + 1);
-          memcpy (concat_name, tmp, tmp_len);
-          concat_name[tmp_len] = '/';
-          strcpy (concat_name + tmp_len + 1, wrapper);
-        }
-        else
-        {
-          concat_name = XMALLOC(char, p_len + 1 + strlen(wrapper) + 1);
-          memcpy (concat_name, p, p_len);
-          concat_name[p_len] = '/';
-          strcpy (concat_name + p_len + 1, wrapper);
-        }
-        if (check_executable(concat_name))
-          return concat_name;
-        XFREE(concat_name);
-      }
-    }
-    /* not found in PATH; assume curdir */
-  }
-  /* Relative path | not found in path: prepend cwd */
-  if (getcwd (tmp, LT_PATHMAX) == NULL)
-    lt_fatal ("getcwd failed");
-  tmp_len = strlen(tmp);
-  concat_name = XMALLOC(char, tmp_len + 1 + strlen(wrapper) + 1);
-  memcpy (concat_name, tmp, tmp_len);
-  concat_name[tmp_len] = '/';
-  strcpy (concat_name + tmp_len + 1, wrapper);
-
-  if (check_executable(concat_name))
-    return concat_name;
-  XFREE(concat_name);
-  return NULL;
-}
-
-char *
-strendzap(char *str, const char *pat)
-{
-  size_t len, patlen;
-
-  assert(str != NULL);
-  assert(pat != NULL);
-
-  len = strlen(str);
-  patlen = strlen(pat);
-
-  if (patlen <= len)
-  {
-    str += len - patlen;
-    if (strcmp(str, pat) == 0)
-      *str = '\0';
-  }
-  return str;
-}
-
-static void
-lt_error_core (int exit_status, const char * mode,
-          const char * message, va_list ap)
-{
-  fprintf (stderr, "%s: %s: ", program_name, mode);
-  vfprintf (stderr, message, ap);
-  fprintf (stderr, ".\n");
-
-  if (exit_status >= 0)
-    exit (exit_status);
-}
-
-void
-lt_fatal (const char *message, ...)
-{
-  va_list ap;
-  va_start (ap, message);
-  lt_error_core (EXIT_FAILURE, "FATAL", message, ap);
-  va_end (ap);
-}
-EOF
-          # we should really use a build-platform specific compiler
-          # here, but OTOH, the wrappers (shell script and this C one)
-          # are only useful if you want to execute the "real" binary.
-          # Since the "real" binary is built for $host, then this
-          # wrapper might as well be built for $host, too.
-          $run $LTCC $LTCFLAGS -s -o $cwrapper $cwrappersource
-          ;;
-        esac
-        $rm $output
-        trap "$rm $output; exit $EXIT_FAILURE" 1 2 15
-
-	$echo > $output "\
-#! $SHELL
-
-# $output - temporary wrapper script for $objdir/$outputname
-# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP
-#
-# The $output program cannot be directly executed until all the libtool
-# libraries that it depends on are installed.
-#
-# This wrapper script should never be moved out of the build directory.
-# If it is, it will not operate correctly.
-
-# Sed substitution that helps us do robust quoting.  It backslashifies
-# metacharacters that are still active within double-quoted strings.
-Xsed='${SED} -e 1s/^X//'
-sed_quote_subst='$sed_quote_subst'
-
-# Be Bourne compatible (taken from Autoconf:_AS_BOURNE_COMPATIBLE).
-if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then
-  emulate sh
-  NULLCMD=:
-  # Zsh 3.x and 4.x performs word splitting on \${1+\"\$@\"}, which
-  # is contrary to our usage.  Disable this feature.
-  alias -g '\${1+\"\$@\"}'='\"\$@\"'
-  setopt NO_GLOB_SUBST
-else
-  case \`(set -o) 2>/dev/null\` in *posix*) set -o posix;; esac
-fi
-BIN_SH=xpg4; export BIN_SH # for Tru64
-DUALCASE=1; export DUALCASE # for MKS sh
-
-# The HP-UX ksh and POSIX shell print the target directory to stdout
-# if CDPATH is set.
-(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
-
-relink_command=\"$relink_command\"
-
-# This environment variable determines our operation mode.
-if test \"\$libtool_install_magic\" = \"$magic\"; then
-  # install mode needs the following variable:
-  notinst_deplibs='$notinst_deplibs'
-else
-  # When we are sourced in execute mode, \$file and \$echo are already set.
-  if test \"\$libtool_execute_magic\" != \"$magic\"; then
-    echo=\"$qecho\"
-    file=\"\$0\"
-    # Make sure echo works.
-    if test \"X\$1\" = X--no-reexec; then
-      # Discard the --no-reexec flag, and continue.
-      shift
-    elif test \"X\`(\$echo '\t') 2>/dev/null\`\" = 'X\t'; then
-      # Yippee, \$echo works!
-      :
-    else
-      # Restart under the correct shell, and then maybe \$echo will work.
-      exec $SHELL \"\$0\" --no-reexec \${1+\"\$@\"}
-    fi
-  fi\
-"
-	$echo >> $output "\
-
-  # Find the directory that this script lives in.
-  thisdir=\`\$echo \"X\$file\" | \$Xsed -e 's%/[^/]*$%%'\`
-  test \"x\$thisdir\" = \"x\$file\" && thisdir=.
-
-  # Follow symbolic links until we get to the real thisdir.
-  file=\`ls -ld \"\$file\" | ${SED} -n 's/.*-> //p'\`
-  while test -n \"\$file\"; do
-    destdir=\`\$echo \"X\$file\" | \$Xsed -e 's%/[^/]*\$%%'\`
-
-    # If there was a directory component, then change thisdir.
-    if test \"x\$destdir\" != \"x\$file\"; then
-      case \"\$destdir\" in
-      [\\\\/]* | [A-Za-z]:[\\\\/]*) thisdir=\"\$destdir\" ;;
-      *) thisdir=\"\$thisdir/\$destdir\" ;;
-      esac
-    fi
-
-    file=\`\$echo \"X\$file\" | \$Xsed -e 's%^.*/%%'\`
-    file=\`ls -ld \"\$thisdir/\$file\" | ${SED} -n 's/.*-> //p'\`
-  done
-
-  # Try to get the absolute directory name.
-  absdir=\`cd \"\$thisdir\" && pwd\`
-  test -n \"\$absdir\" && thisdir=\"\$absdir\"
-"
-
-	if test "$fast_install" = yes; then
-	  $echo >> $output "\
-  program=lt-'$outputname'$exeext
-  progdir=\"\$thisdir/$objdir\"
-
-  if test ! -f \"\$progdir/\$program\" || \\
-     { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | ${SED} 1q\`; \\
-       test \"X\$file\" != \"X\$progdir/\$program\"; }; then
-
-    file=\"\$\$-\$program\"
-
-    if test ! -d \"\$progdir\"; then
-      $mkdir \"\$progdir\"
-    else
-      $rm \"\$progdir/\$file\"
-    fi"
-
-	  $echo >> $output "\
-
-    # relink executable if necessary
-    if test -n \"\$relink_command\"; then
-      if relink_command_output=\`eval \$relink_command 2>&1\`; then :
-      else
-	$echo \"\$relink_command_output\" >&2
-	$rm \"\$progdir/\$file\"
-	exit $EXIT_FAILURE
-      fi
-    fi
-
-    $mv \"\$progdir/\$file\" \"\$progdir/\$program\" 2>/dev/null ||
-    { $rm \"\$progdir/\$program\";
-      $mv \"\$progdir/\$file\" \"\$progdir/\$program\"; }
-    $rm \"\$progdir/\$file\"
-  fi"
-	else
-	  $echo >> $output "\
-  program='$outputname'
-  progdir=\"\$thisdir/$objdir\"
-"
-	fi
-
-	$echo >> $output "\
-
-  if test -f \"\$progdir/\$program\"; then"
-
-	# Export our shlibpath_var if we have one.
-	if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
-	  $echo >> $output "\
-    # Add our own library path to $shlibpath_var
-    $shlibpath_var=\"$temp_rpath\$$shlibpath_var\"
-
-    # Some systems cannot cope with colon-terminated $shlibpath_var
-    # The second colon is a workaround for a bug in BeOS R4 sed
-    $shlibpath_var=\`\$echo \"X\$$shlibpath_var\" | \$Xsed -e 's/::*\$//'\`
-
-    export $shlibpath_var
-"
-	fi
-
-	# fixup the dll searchpath if we need to.
-	if test -n "$dllsearchpath"; then
-	  $echo >> $output "\
-    # Add the dll search path components to the executable PATH
-    PATH=$dllsearchpath:\$PATH
-"
-	fi
-
-	$echo >> $output "\
-    if test \"\$libtool_execute_magic\" != \"$magic\"; then
-      # Run the actual program with our arguments.
-"
-	case $host in
-	# Backslashes separate directories on plain windows
-	*-*-mingw | *-*-os2*)
-	  $echo >> $output "\
-      exec \"\$progdir\\\\\$program\" \${1+\"\$@\"}
-"
-	  ;;
-
-	*)
-	  $echo >> $output "\
-      exec \"\$progdir/\$program\" \${1+\"\$@\"}
-"
-	  ;;
-	esac
-	$echo >> $output "\
-      \$echo \"\$0: cannot exec \$program \$*\"
-      exit $EXIT_FAILURE
-    fi
-  else
-    # The program doesn't exist.
-    \$echo \"\$0: error: \\\`\$progdir/\$program' does not exist\" 1>&2
-    \$echo \"This script is just a wrapper for \$program.\" 1>&2
-    $echo \"See the $PACKAGE documentation for more information.\" 1>&2
-    exit $EXIT_FAILURE
-  fi
-fi\
-"
-	chmod +x $output
-      fi
-      exit $EXIT_SUCCESS
-      ;;
-    esac
-
-    # See if we need to build an old-fashioned archive.
-    for oldlib in $oldlibs; do
-
-      if test "$build_libtool_libs" = convenience; then
-	oldobjs="$libobjs_save"
-	addlibs="$convenience"
-	build_libtool_libs=no
-      else
-	if test "$build_libtool_libs" = module; then
-	  oldobjs="$libobjs_save"
-	  build_libtool_libs=no
-	else
-	  oldobjs="$old_deplibs $non_pic_objects"
-	fi
-	addlibs="$old_convenience"
-      fi
-
-      if test -n "$addlibs"; then
-	gentop="$output_objdir/${outputname}x"
-	generated="$generated $gentop"
-
-	func_extract_archives $gentop $addlibs
-	oldobjs="$oldobjs $func_extract_archives_result"
-      fi
-
-      # Do each command in the archive commands.
-      if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then
-       cmds=$old_archive_from_new_cmds
-      else
-	# POSIX demands no paths to be encoded in archives.  We have
-	# to avoid creating archives with duplicate basenames if we
-	# might have to extract them afterwards, e.g., when creating a
-	# static archive out of a convenience library, or when linking
-	# the entirety of a libtool archive into another (currently
-	# not supported by libtool).
-	if (for obj in $oldobjs
-	    do
-	      $echo "X$obj" | $Xsed -e 's%^.*/%%'
-	    done | sort | sort -uc >/dev/null 2>&1); then
-	  :
-	else
-	  $echo "copying selected object files to avoid basename conflicts..."
-
-	  if test -z "$gentop"; then
-	    gentop="$output_objdir/${outputname}x"
-	    generated="$generated $gentop"
-
-	    $show "${rm}r $gentop"
-	    $run ${rm}r "$gentop"
-	    $show "$mkdir $gentop"
-	    $run $mkdir "$gentop"
-	    exit_status=$?
-	    if test "$exit_status" -ne 0 && test ! -d "$gentop"; then
-	      exit $exit_status
-	    fi
-	  fi
-
-	  save_oldobjs=$oldobjs
-	  oldobjs=
-	  counter=1
-	  for obj in $save_oldobjs
-	  do
-	    objbase=`$echo "X$obj" | $Xsed -e 's%^.*/%%'`
-	    case " $oldobjs " in
-	    " ") oldobjs=$obj ;;
-	    *[\ /]"$objbase "*)
-	      while :; do
-		# Make sure we don't pick an alternate name that also
-		# overlaps.
-		newobj=lt$counter-$objbase
-		counter=`expr $counter + 1`
-		case " $oldobjs " in
-		*[\ /]"$newobj "*) ;;
-		*) if test ! -f "$gentop/$newobj"; then break; fi ;;
-		esac
-	      done
-	      $show "ln $obj $gentop/$newobj || cp $obj $gentop/$newobj"
-	      $run ln "$obj" "$gentop/$newobj" ||
-	      $run cp "$obj" "$gentop/$newobj"
-	      oldobjs="$oldobjs $gentop/$newobj"
-	      ;;
-	    *) oldobjs="$oldobjs $obj" ;;
-	    esac
-	  done
-	fi
-
-	eval cmds=\"$old_archive_cmds\"
-
-	if len=`expr "X$cmds" : ".*"` &&
-	     test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then
-	  cmds=$old_archive_cmds
-	else
-	  # the command line is too long to link in one step, link in parts
-	  $echo "using piecewise archive linking..."
-	  save_RANLIB=$RANLIB
-	  RANLIB=:
-	  objlist=
-	  concat_cmds=
-	  save_oldobjs=$oldobjs
-
-	  # Is there a better way of finding the last object in the list?
-	  for obj in $save_oldobjs
-	  do
-	    last_oldobj=$obj
-	  done
-	  for obj in $save_oldobjs
-	  do
-	    oldobjs="$objlist $obj"
-	    objlist="$objlist $obj"
-	    eval test_cmds=\"$old_archive_cmds\"
-	    if len=`expr "X$test_cmds" : ".*" 2>/dev/null` &&
-	       test "$len" -le "$max_cmd_len"; then
-	      :
-	    else
-	      # the above command should be used before it gets too long
-	      oldobjs=$objlist
-	      if test "$obj" = "$last_oldobj" ; then
-	        RANLIB=$save_RANLIB
-	      fi
-	      test -z "$concat_cmds" || concat_cmds=$concat_cmds~
-	      eval concat_cmds=\"\${concat_cmds}$old_archive_cmds\"
-	      objlist=
-	    fi
-	  done
-	  RANLIB=$save_RANLIB
-	  oldobjs=$objlist
-	  if test "X$oldobjs" = "X" ; then
-	    eval cmds=\"\$concat_cmds\"
-	  else
-	    eval cmds=\"\$concat_cmds~\$old_archive_cmds\"
-	  fi
-	fi
-      fi
-      save_ifs="$IFS"; IFS='~'
-      for cmd in $cmds; do
-        eval cmd=\"$cmd\"
-	IFS="$save_ifs"
-	$show "$cmd"
-	$run eval "$cmd" || exit $?
-      done
-      IFS="$save_ifs"
-    done
-
-    if test -n "$generated"; then
-      $show "${rm}r$generated"
-      $run ${rm}r$generated
-    fi
-
-    # Now create the libtool archive.
-    case $output in
-    *.la)
-      old_library=
-      test "$build_old_libs" = yes && old_library="$libname.$libext"
-      $show "creating $output"
-
-      # Preserve any variables that may affect compiler behavior
-      for var in $variables_saved_for_relink; do
-	if eval test -z \"\${$var+set}\"; then
-	  relink_command="{ test -z \"\${$var+set}\" || unset $var || { $var=; export $var; }; }; $relink_command"
-	elif eval var_value=\$$var; test -z "$var_value"; then
-	  relink_command="$var=; export $var; $relink_command"
-	else
-	  var_value=`$echo "X$var_value" | $Xsed -e "$sed_quote_subst"`
-	  relink_command="$var=\"$var_value\"; export $var; $relink_command"
-	fi
-      done
-      # Quote the link command for shipping.
-      relink_command="(cd `pwd`; $SHELL $progpath $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)"
-      relink_command=`$echo "X$relink_command" | $SP2NL | $Xsed -e "$sed_quote_subst" | $NL2SP`
-      if test "$hardcode_automatic" = yes ; then
-	relink_command=
-      fi
-
-
-      # Only create the output if not a dry run.
-      if test -z "$run"; then
-	for installed in no yes; do
-	  if test "$installed" = yes; then
-	    if test -z "$install_libdir"; then
-	      break
-	    fi
-	    output="$output_objdir/$outputname"i
-	    # Replace all uninstalled libtool libraries with the installed ones
-	    newdependency_libs=
-	    for deplib in $dependency_libs; do
-	      case $deplib in
-	      *.la)
-		name=`$echo "X$deplib" | $Xsed -e 's%^.*/%%'`
-		eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
-		if test -z "$libdir"; then
-		  $echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2
-		  exit $EXIT_FAILURE
-		fi
-		newdependency_libs="$newdependency_libs $libdir/$name"
-		;;
-	      *) newdependency_libs="$newdependency_libs $deplib" ;;
-	      esac
-	    done
-	    dependency_libs="$newdependency_libs"
-	    newdlfiles=
-	    for lib in $dlfiles; do
-	      name=`$echo "X$lib" | $Xsed -e 's%^.*/%%'`
-	      eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
-	      if test -z "$libdir"; then
-		$echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
-		exit $EXIT_FAILURE
-	      fi
-	      newdlfiles="$newdlfiles $libdir/$name"
-	    done
-	    dlfiles="$newdlfiles"
-	    newdlprefiles=
-	    for lib in $dlprefiles; do
-	      name=`$echo "X$lib" | $Xsed -e 's%^.*/%%'`
-	      eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
-	      if test -z "$libdir"; then
-		$echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
-		exit $EXIT_FAILURE
-	      fi
-	      newdlprefiles="$newdlprefiles $libdir/$name"
-	    done
-	    dlprefiles="$newdlprefiles"
-	  else
-	    newdlfiles=
-	    for lib in $dlfiles; do
-	      case $lib in
-		[\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;;
-		*) abs=`pwd`"/$lib" ;;
-	      esac
-	      newdlfiles="$newdlfiles $abs"
-	    done
-	    dlfiles="$newdlfiles"
-	    newdlprefiles=
-	    for lib in $dlprefiles; do
-	      case $lib in
-		[\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;;
-		*) abs=`pwd`"/$lib" ;;
-	      esac
-	      newdlprefiles="$newdlprefiles $abs"
-	    done
-	    dlprefiles="$newdlprefiles"
-	  fi
-	  $rm $output
-	  # place dlname in correct position for cygwin
-	  tdlname=$dlname
-	  case $host,$output,$installed,$module,$dlname in
-	    *cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll) tdlname=../bin/$dlname ;;
-	  esac
-	  $echo > $output "\
-# $outputname - a libtool library file
-# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP
-#
-# Please DO NOT delete this file!
-# It is necessary for linking the library.
-
-# The name that we can dlopen(3).
-dlname='$tdlname'
-
-# Names of this library.
-library_names='$library_names'
-
-# The name of the static archive.
-old_library='$old_library'
-
-# Libraries that this one depends upon.
-dependency_libs='$dependency_libs'
-
-# Version information for $libname.
-current=$current
-age=$age
-revision=$revision
-
-# Is this an already installed library?
-installed=$installed
-
-# Should we warn about portability when linking against -modules?
-shouldnotlink=$module
-
-# Files to dlopen/dlpreopen
-dlopen='$dlfiles'
-dlpreopen='$dlprefiles'
-
-# Directory that this library needs to be installed in:
-libdir='$install_libdir'"
-	  if test "$installed" = no && test "$need_relink" = yes; then
-	    $echo >> $output "\
-relink_command=\"$relink_command\""
-	  fi
-	done
-      fi
-
-      # Do a symbolic link so that the libtool archive can be found in
-      # LD_LIBRARY_PATH before the program is installed.
-      $show "(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)"
-      $run eval '(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)' || exit $?
-      ;;
-    esac
-    exit $EXIT_SUCCESS
-    ;;
-
-  # libtool install mode
-  install)
-    modename="$modename: install"
-
-    # There may be an optional sh(1) argument at the beginning of
-    # install_prog (especially on Windows NT).
-    if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh ||
-       # Allow the use of GNU shtool's install command.
-       $echo "X$nonopt" | grep shtool > /dev/null; then
-      # Aesthetically quote it.
-      arg=`$echo "X$nonopt" | $Xsed -e "$sed_quote_subst"`
-      case $arg in
-      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
-	arg="\"$arg\""
-	;;
-      esac
-      install_prog="$arg "
-      arg="$1"
-      shift
-    else
-      install_prog=
-      arg=$nonopt
-    fi
-
-    # The real first argument should be the name of the installation program.
-    # Aesthetically quote it.
-    arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
-    case $arg in
-    *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
-      arg="\"$arg\""
-      ;;
-    esac
-    install_prog="$install_prog$arg"
-
-    # We need to accept at least all the BSD install flags.
-    dest=
-    files=
-    opts=
-    prev=
-    install_type=
-    isdir=no
-    stripme=
-    for arg
-    do
-      if test -n "$dest"; then
-	files="$files $dest"
-	dest=$arg
-	continue
-      fi
-
-      case $arg in
-      -d) isdir=yes ;;
-      -f) 
-      	case " $install_prog " in
-	*[\\\ /]cp\ *) ;;
-	*) prev=$arg ;;
-	esac
-	;;
-      -g | -m | -o) prev=$arg ;;
-      -s)
-	stripme=" -s"
-	continue
-	;;
-      -*)
-	;;
-      *)
-	# If the previous option needed an argument, then skip it.
-	if test -n "$prev"; then
-	  prev=
-	else
-	  dest=$arg
-	  continue
-	fi
-	;;
-      esac
-
-      # Aesthetically quote the argument.
-      arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
-      case $arg in
-      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")
-	arg="\"$arg\""
-	;;
-      esac
-      install_prog="$install_prog $arg"
-    done
-
-    if test -z "$install_prog"; then
-      $echo "$modename: you must specify an install program" 1>&2
-      $echo "$help" 1>&2
-      exit $EXIT_FAILURE
-    fi
-
-    if test -n "$prev"; then
-      $echo "$modename: the \`$prev' option requires an argument" 1>&2
-      $echo "$help" 1>&2
-      exit $EXIT_FAILURE
-    fi
-
-    if test -z "$files"; then
-      if test -z "$dest"; then
-	$echo "$modename: no file or destination specified" 1>&2
-      else
-	$echo "$modename: you must specify a destination" 1>&2
-      fi
-      $echo "$help" 1>&2
-      exit $EXIT_FAILURE
-    fi
-
-    # Strip any trailing slash from the destination.
-    dest=`$echo "X$dest" | $Xsed -e 's%/$%%'`
-
-    # Check to see that the destination is a directory.
-    test -d "$dest" && isdir=yes
-    if test "$isdir" = yes; then
-      destdir="$dest"
-      destname=
-    else
-      destdir=`$echo "X$dest" | $Xsed -e 's%/[^/]*$%%'`
-      test "X$destdir" = "X$dest" && destdir=.
-      destname=`$echo "X$dest" | $Xsed -e 's%^.*/%%'`
-
-      # Not a directory, so check to see that there is only one file specified.
-      set dummy $files
-      if test "$#" -gt 2; then
-	$echo "$modename: \`$dest' is not a directory" 1>&2
-	$echo "$help" 1>&2
-	exit $EXIT_FAILURE
-      fi
-    fi
-    case $destdir in
-    [\\/]* | [A-Za-z]:[\\/]*) ;;
-    *)
-      for file in $files; do
-	case $file in
-	*.lo) ;;
-	*)
-	  $echo "$modename: \`$destdir' must be an absolute directory name" 1>&2
-	  $echo "$help" 1>&2
-	  exit $EXIT_FAILURE
-	  ;;
-	esac
-      done
-      ;;
-    esac
-
-    # This variable tells wrapper scripts just to set variables rather
-    # than running their programs.
-    libtool_install_magic="$magic"
-
-    staticlibs=
-    future_libdirs=
-    current_libdirs=
-    for file in $files; do
-
-      # Do each installation.
-      case $file in
-      *.$libext)
-	# Do the static libraries later.
-	staticlibs="$staticlibs $file"
-	;;
-
-      *.la)
-	# Check to see that this really is a libtool archive.
-	if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
-	else
-	  $echo "$modename: \`$file' is not a valid libtool archive" 1>&2
-	  $echo "$help" 1>&2
-	  exit $EXIT_FAILURE
-	fi
-
-	library_names=
-	old_library=
-	relink_command=
-	# If there is no directory component, then add one.
-	case $file in
-	*/* | *\\*) . $file ;;
-	*) . ./$file ;;
-	esac
-
-	# Add the libdir to current_libdirs if it is the destination.
-	if test "X$destdir" = "X$libdir"; then
-	  case "$current_libdirs " in
-	  *" $libdir "*) ;;
-	  *) current_libdirs="$current_libdirs $libdir" ;;
-	  esac
-	else
-	  # Note the libdir as a future libdir.
-	  case "$future_libdirs " in
-	  *" $libdir "*) ;;
-	  *) future_libdirs="$future_libdirs $libdir" ;;
-	  esac
-	fi
-
-	dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`/
-	test "X$dir" = "X$file/" && dir=
-	dir="$dir$objdir"
-
-	if test -n "$relink_command"; then
-	  # Determine the prefix the user has applied to our future dir.
-	  inst_prefix_dir=`$echo "$destdir" | $SED "s%$libdir\$%%"`
-
-	  # Don't allow the user to place us outside of our expected
-	  # location b/c this prevents finding dependent libraries that
-	  # are installed to the same prefix.
-	  # At present, this check doesn't affect windows .dll's that
-	  # are installed into $libdir/../bin (currently, that works fine)
-	  # but it's something to keep an eye on.
-	  if test "$inst_prefix_dir" = "$destdir"; then
-	    $echo "$modename: error: cannot install \`$file' to a directory not ending in $libdir" 1>&2
-	    exit $EXIT_FAILURE
-	  fi
-
-	  if test -n "$inst_prefix_dir"; then
-	    # Stick the inst_prefix_dir data into the link command.
-	    relink_command=`$echo "$relink_command" | $SP2NL | $SED "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%" | $NL2SP`
-	  else
-	    relink_command=`$echo "$relink_command" | $SP2NL | $SED "s%@inst_prefix_dir@%%" | $NL2SP`
-	  fi
-
-	  $echo "$modename: warning: relinking \`$file'" 1>&2
-	  $show "$relink_command"
-	  if $run eval "$relink_command"; then :
-	  else
-	    $echo "$modename: error: relink \`$file' with the above command before installing it" 1>&2
-	    exit $EXIT_FAILURE
-	  fi
-	fi
-
-	# See the names of the shared library.
-	set dummy $library_names
-	if test -n "$2"; then
-	  realname="$2"
-	  shift
-	  shift
-
-	  srcname="$realname"
-	  test -n "$relink_command" && srcname="$realname"T
-
-	  # Install the shared library and build the symlinks.
-	  $show "$install_prog $dir/$srcname $destdir/$realname"
-	  $run eval "$install_prog $dir/$srcname $destdir/$realname" || exit $?
-	  if test -n "$stripme" && test -n "$striplib"; then
-	    $show "$striplib $destdir/$realname"
-	    $run eval "$striplib $destdir/$realname" || exit $?
-	  fi
-
-	  if test "$#" -gt 0; then
-	    # Delete the old symlinks, and create new ones.
-	    # Try `ln -sf' first, because the `ln' binary might depend on
-	    # the symlink we replace!  Solaris /bin/ln does not understand -f,
-	    # so we also need to try rm && ln -s.
-	    for linkname
-	    do
-	      if test "$linkname" != "$realname"; then
-                $show "(cd $destdir && { $LN_S -f $realname $linkname || { $rm $linkname && $LN_S $realname $linkname; }; })"
-                $run eval "(cd $destdir && { $LN_S -f $realname $linkname || { $rm $linkname && $LN_S $realname $linkname; }; })"
-	      fi
-	    done
-	  fi
-
-	  # Do each command in the postinstall commands.
-	  lib="$destdir/$realname"
-	  cmds=$postinstall_cmds
-	  save_ifs="$IFS"; IFS='~'
-	  for cmd in $cmds; do
-	    IFS="$save_ifs"
-	    eval cmd=\"$cmd\"
-	    $show "$cmd"
-	    $run eval "$cmd" || {
-	      lt_exit=$?
-
-	      # Restore the uninstalled library and exit
-	      if test "$mode" = relink; then
-		$run eval '(cd $output_objdir && $rm ${realname}T && $mv ${realname}U $realname)'
-	      fi
-
-	      exit $lt_exit
-	    }
-	  done
-	  IFS="$save_ifs"
-	fi
-
-	# Install the pseudo-library for information purposes.
-	name=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
-	instname="$dir/$name"i
-	$show "$install_prog $instname $destdir/$name"
-	$run eval "$install_prog $instname $destdir/$name" || exit $?
-
-	# Maybe install the static library, too.
-	test -n "$old_library" && staticlibs="$staticlibs $dir/$old_library"
-	;;
-
-      *.lo)
-	# Install (i.e. copy) a libtool object.
-
-	# Figure out destination file name, if it wasn't already specified.
-	if test -n "$destname"; then
-	  destfile="$destdir/$destname"
-	else
-	  destfile=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
-	  destfile="$destdir/$destfile"
-	fi
-
-	# Deduce the name of the destination old-style object file.
-	case $destfile in
-	*.lo)
-	  staticdest=`$echo "X$destfile" | $Xsed -e "$lo2o"`
-	  ;;
-	*.$objext)
-	  staticdest="$destfile"
-	  destfile=
-	  ;;
-	*)
-	  $echo "$modename: cannot copy a libtool object to \`$destfile'" 1>&2
-	  $echo "$help" 1>&2
-	  exit $EXIT_FAILURE
-	  ;;
-	esac
-
-	# Install the libtool object if requested.
-	if test -n "$destfile"; then
-	  $show "$install_prog $file $destfile"
-	  $run eval "$install_prog $file $destfile" || exit $?
-	fi
-
-	# Install the old object if enabled.
-	if test "$build_old_libs" = yes; then
-	  # Deduce the name of the old-style object file.
-	  staticobj=`$echo "X$file" | $Xsed -e "$lo2o"`
-
-	  $show "$install_prog $staticobj $staticdest"
-	  $run eval "$install_prog \$staticobj \$staticdest" || exit $?
-	fi
-	exit $EXIT_SUCCESS
-	;;
-
-      *)
-	# Figure out destination file name, if it wasn't already specified.
-	if test -n "$destname"; then
-	  destfile="$destdir/$destname"
-	else
-	  destfile=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
-	  destfile="$destdir/$destfile"
-	fi
-
-	# If the file is missing, and there is a .exe on the end, strip it
-	# because it is most likely a libtool script we actually want to
-	# install
-	stripped_ext=""
-	case $file in
-	  *.exe)
-	    if test ! -f "$file"; then
-	      file=`$echo $file|${SED} 's,.exe$,,'`
-	      stripped_ext=".exe"
-	    fi
-	    ;;
-	esac
-
-	# Do a test to see if this is really a libtool program.
-	case $host in
-	*cygwin*|*mingw*)
-	    wrapper=`$echo $file | ${SED} -e 's,.exe$,,'`
-	    ;;
-	*)
-	    wrapper=$file
-	    ;;
-	esac
-	if (${SED} -e '4q' $wrapper | grep "^# Generated by .*$PACKAGE")>/dev/null 2>&1; then
-	  notinst_deplibs=
-	  relink_command=
-
-	  # Note that it is not necessary on cygwin/mingw to append a dot to
-	  # foo even if both foo and FILE.exe exist: automatic-append-.exe
-	  # behavior happens only for exec(3), not for open(2)!  Also, sourcing
-	  # `FILE.' does not work on cygwin managed mounts.
-	  #
-	  # If there is no directory component, then add one.
-	  case $wrapper in
-	  */* | *\\*) . ${wrapper} ;;
-	  *) . ./${wrapper} ;;
-	  esac
-
-	  # Check the variables that should have been set.
-	  if test -z "$notinst_deplibs"; then
-	    $echo "$modename: invalid libtool wrapper script \`$wrapper'" 1>&2
-	    exit $EXIT_FAILURE
-	  fi
-
-	  finalize=yes
-	  for lib in $notinst_deplibs; do
-	    # Check to see that each library is installed.
-	    libdir=
-	    if test -f "$lib"; then
-	      # If there is no directory component, then add one.
-	      case $lib in
-	      */* | *\\*) . $lib ;;
-	      *) . ./$lib ;;
-	      esac
-	    fi
-	    libfile="$libdir/"`$echo "X$lib" | $Xsed -e 's%^.*/%%g'` ### testsuite: skip nested quoting test
-	    if test -n "$libdir" && test ! -f "$libfile"; then
-	      $echo "$modename: warning: \`$lib' has not been installed in \`$libdir'" 1>&2
-	      finalize=no
-	    fi
-	  done
-
-	  relink_command=
-	  # Note that it is not necessary on cygwin/mingw to append a dot to
-	  # foo even if both foo and FILE.exe exist: automatic-append-.exe
-	  # behavior happens only for exec(3), not for open(2)!  Also, sourcing
-	  # `FILE.' does not work on cygwin managed mounts.
-	  #
-	  # If there is no directory component, then add one.
-	  case $wrapper in
-	  */* | *\\*) . ${wrapper} ;;
-	  *) . ./${wrapper} ;;
-	  esac
-
-	  outputname=
-	  if test "$fast_install" = no && test -n "$relink_command"; then
-	    if test "$finalize" = yes && test -z "$run"; then
-	      tmpdir=`func_mktempdir`
-	      file=`$echo "X$file$stripped_ext" | $Xsed -e 's%^.*/%%'`
-	      outputname="$tmpdir/$file"
-	      # Replace the output file specification.
-	      relink_command=`$echo "X$relink_command" | $SP2NL | $Xsed -e 's%@OUTPUT@%'"$outputname"'%g' | $NL2SP`
-
-	      $show "$relink_command"
-	      if $run eval "$relink_command"; then :
-	      else
-		$echo "$modename: error: relink \`$file' with the above command before installing it" 1>&2
-		${rm}r "$tmpdir"
-		continue
-	      fi
-	      file="$outputname"
-	    else
-	      $echo "$modename: warning: cannot relink \`$file'" 1>&2
-	    fi
-	  else
-	    # Install the binary that we compiled earlier.
-	    file=`$echo "X$file$stripped_ext" | $Xsed -e "s%\([^/]*\)$%$objdir/\1%"`
-	  fi
-	fi
-
-	# remove .exe since cygwin /usr/bin/install will append another
-	# one anyway 
-	case $install_prog,$host in
-	*/usr/bin/install*,*cygwin*)
-	  case $file:$destfile in
-	  *.exe:*.exe)
-	    # this is ok
-	    ;;
-	  *.exe:*)
-	    destfile=$destfile.exe
-	    ;;
-	  *:*.exe)
-	    destfile=`$echo $destfile | ${SED} -e 's,.exe$,,'`
-	    ;;
-	  esac
-	  ;;
-	esac
-	$show "$install_prog$stripme $file $destfile"
-	$run eval "$install_prog\$stripme \$file \$destfile" || exit $?
-	test -n "$outputname" && ${rm}r "$tmpdir"
-	;;
-      esac
-    done
-
-    for file in $staticlibs; do
-      name=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
-
-      # Set up the ranlib parameters.
-      oldlib="$destdir/$name"
-
-      $show "$install_prog $file $oldlib"
-      $run eval "$install_prog \$file \$oldlib" || exit $?
-
-      if test -n "$stripme" && test -n "$old_striplib"; then
-	$show "$old_striplib $oldlib"
-	$run eval "$old_striplib $oldlib" || exit $?
-      fi
-
-      # Do each command in the postinstall commands.
-      cmds=$old_postinstall_cmds
-      save_ifs="$IFS"; IFS='~'
-      for cmd in $cmds; do
-	IFS="$save_ifs"
-	eval cmd=\"$cmd\"
-	$show "$cmd"
-	$run eval "$cmd" || exit $?
-      done
-      IFS="$save_ifs"
-    done
-
-    if test -n "$future_libdirs"; then
-      $echo "$modename: warning: remember to run \`$progname --finish$future_libdirs'" 1>&2
-    fi
-
-    if test -n "$current_libdirs"; then
-      # Maybe just do a dry run.
-      test -n "$run" && current_libdirs=" -n$current_libdirs"
-      exec_cmd='$SHELL $progpath $preserve_args --finish$current_libdirs'
-    else
-      exit $EXIT_SUCCESS
-    fi
-    ;;
-
-  # libtool finish mode
-  finish)
-    modename="$modename: finish"
-    libdirs="$nonopt"
-    admincmds=
-
-    if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then
-      for dir
-      do
-	libdirs="$libdirs $dir"
-      done
-
-      for libdir in $libdirs; do
-	if test -n "$finish_cmds"; then
-	  # Do each command in the finish commands.
-	  cmds=$finish_cmds
-	  save_ifs="$IFS"; IFS='~'
-	  for cmd in $cmds; do
-	    IFS="$save_ifs"
-	    eval cmd=\"$cmd\"
-	    $show "$cmd"
-	    $run eval "$cmd" || admincmds="$admincmds
-       $cmd"
-	  done
-	  IFS="$save_ifs"
-	fi
-	if test -n "$finish_eval"; then
-	  # Do the single finish_eval.
-	  eval cmds=\"$finish_eval\"
-	  $run eval "$cmds" || admincmds="$admincmds
-       $cmds"
-	fi
-      done
-    fi
-
-    # Exit here if they wanted silent mode.
-    test "$show" = : && exit $EXIT_SUCCESS
-
-    $echo "X----------------------------------------------------------------------" | $Xsed
-    $echo "Libraries have been installed in:"
-    for libdir in $libdirs; do
-      $echo "   $libdir"
-    done
-    $echo
-    $echo "If you ever happen to want to link against installed libraries"
-    $echo "in a given directory, LIBDIR, you must either use libtool, and"
-    $echo "specify the full pathname of the library, or use the \`-LLIBDIR'"
-    $echo "flag during linking and do at least one of the following:"
-    if test -n "$shlibpath_var"; then
-      $echo "   - add LIBDIR to the \`$shlibpath_var' environment variable"
-      $echo "     during execution"
-    fi
-    if test -n "$runpath_var"; then
-      $echo "   - add LIBDIR to the \`$runpath_var' environment variable"
-      $echo "     during linking"
-    fi
-    if test -n "$hardcode_libdir_flag_spec"; then
-      libdir=LIBDIR
-      eval flag=\"$hardcode_libdir_flag_spec\"
-
-      $echo "   - use the \`$flag' linker flag"
-    fi
-    if test -n "$admincmds"; then
-      $echo "   - have your system administrator run these commands:$admincmds"
-    fi
-    if test -f /etc/ld.so.conf; then
-      $echo "   - have your system administrator add LIBDIR to \`/etc/ld.so.conf'"
-    fi
-    $echo
-    $echo "See any operating system documentation about shared libraries for"
-    $echo "more information, such as the ld(1) and ld.so(8) manual pages."
-    $echo "X----------------------------------------------------------------------" | $Xsed
-    exit $EXIT_SUCCESS
-    ;;
-
-  # libtool execute mode
-  execute)
-    modename="$modename: execute"
-
-    # The first argument is the command name.
-    cmd="$nonopt"
-    if test -z "$cmd"; then
-      $echo "$modename: you must specify a COMMAND" 1>&2
-      $echo "$help"
-      exit $EXIT_FAILURE
-    fi
-
-    # Handle -dlopen flags immediately.
-    for file in $execute_dlfiles; do
-      if test ! -f "$file"; then
-	$echo "$modename: \`$file' is not a file" 1>&2
-	$echo "$help" 1>&2
-	exit $EXIT_FAILURE
-      fi
-
-      dir=
-      case $file in
-      *.la)
-	# Check to see that this really is a libtool archive.
-	if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
-	else
-	  $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
-	  $echo "$help" 1>&2
-	  exit $EXIT_FAILURE
-	fi
-
-	# Read the libtool library.
-	dlname=
-	library_names=
-
-	# If there is no directory component, then add one.
-	case $file in
-	*/* | *\\*) . $file ;;
-	*) . ./$file ;;
-	esac
-
-	# Skip this library if it cannot be dlopened.
-	if test -z "$dlname"; then
-	  # Warn if it was a shared library.
-	  test -n "$library_names" && $echo "$modename: warning: \`$file' was not linked with \`-export-dynamic'"
-	  continue
-	fi
-
-	dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`
-	test "X$dir" = "X$file" && dir=.
-
-	if test -f "$dir/$objdir/$dlname"; then
-	  dir="$dir/$objdir"
-	else
-	  if test ! -f "$dir/$dlname"; then
-	    $echo "$modename: cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'" 1>&2
-	    exit $EXIT_FAILURE
-	  fi
-	fi
-	;;
-
-      *.lo)
-	# Just add the directory containing the .lo file.
-	dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`
-	test "X$dir" = "X$file" && dir=.
-	;;
-
-      *)
-	$echo "$modename: warning \`-dlopen' is ignored for non-libtool libraries and objects" 1>&2
-	continue
-	;;
-      esac
-
-      # Get the absolute pathname.
-      absdir=`cd "$dir" && pwd`
-      test -n "$absdir" && dir="$absdir"
-
-      # Now add the directory to shlibpath_var.
-      if eval "test -z \"\$$shlibpath_var\""; then
-	eval "$shlibpath_var=\"\$dir\""
-      else
-	eval "$shlibpath_var=\"\$dir:\$$shlibpath_var\""
-      fi
-    done
-
-    # This variable tells wrapper scripts just to set shlibpath_var
-    # rather than running their programs.
-    libtool_execute_magic="$magic"
-
-    # Check if any of the arguments is a wrapper script.
-    args=
-    for file
-    do
-      case $file in
-      -*) ;;
-      *)
-	# Do a test to see if this is really a libtool program.
-	if (${SED} -e '4q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
-	  # If there is no directory component, then add one.
-	  case $file in
-	  */* | *\\*) . $file ;;
-	  *) . ./$file ;;
-	  esac
-
-	  # Transform arg to wrapped name.
-	  file="$progdir/$program"
-	fi
-	;;
-      esac
-      # Quote arguments (to preserve shell metacharacters).
-      file=`$echo "X$file" | $Xsed -e "$sed_quote_subst"`
-      args="$args \"$file\""
-    done
-
-    if test -z "$run"; then
-      if test -n "$shlibpath_var"; then
-	# Export the shlibpath_var.
-	eval "export $shlibpath_var"
-      fi
-
-      # Restore saved environment variables
-      for lt_var in LANG LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
-      do
-	eval "if test \"\${save_$lt_var+set}\" = set; then
-		$lt_var=\$save_$lt_var; export $lt_var
-	      else
-		$lt_unset $lt_var
-	      fi"
-      done
-
-      # Now prepare to actually exec the command.
-      exec_cmd="\$cmd$args"
-    else
-      # Display what would be done.
-      if test -n "$shlibpath_var"; then
-	eval "\$echo \"\$shlibpath_var=\$$shlibpath_var\""
-	$echo "export $shlibpath_var"
-      fi
-      $echo "$cmd$args"
-      exit $EXIT_SUCCESS
-    fi
-    ;;
-
-  # libtool clean and uninstall mode
-  clean | uninstall)
-    modename="$modename: $mode"
-    rm="$nonopt"
-    files=
-    rmforce=
-    exit_status=0
-
-    # This variable tells wrapper scripts just to set variables rather
-    # than running their programs.
-    libtool_install_magic="$magic"
-
-    for arg
-    do
-      case $arg in
-      -f) rm="$rm $arg"; rmforce=yes ;;
-      -*) rm="$rm $arg" ;;
-      *) files="$files $arg" ;;
-      esac
-    done
-
-    if test -z "$rm"; then
-      $echo "$modename: you must specify an RM program" 1>&2
-      $echo "$help" 1>&2
-      exit $EXIT_FAILURE
-    fi
-
-    rmdirs=
-
-    origobjdir="$objdir"
-    for file in $files; do
-      dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`
-      if test "X$dir" = "X$file"; then
-	dir=.
-	objdir="$origobjdir"
-      else
-	objdir="$dir/$origobjdir"
-      fi
-      name=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
-      test "$mode" = uninstall && objdir="$dir"
-
-      # Remember objdir for removal later, being careful to avoid duplicates
-      if test "$mode" = clean; then
-	case " $rmdirs " in
-	  *" $objdir "*) ;;
-	  *) rmdirs="$rmdirs $objdir" ;;
-	esac
-      fi
-
-      # Don't error if the file doesn't exist and rm -f was used.
-      if (test -L "$file") >/dev/null 2>&1 \
-	|| (test -h "$file") >/dev/null 2>&1 \
-	|| test -f "$file"; then
-	:
-      elif test -d "$file"; then
-	exit_status=1
-	continue
-      elif test "$rmforce" = yes; then
-	continue
-      fi
-
-      rmfiles="$file"
-
-      case $name in
-      *.la)
-	# Possibly a libtool archive, so verify it.
-	if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
-	  . $dir/$name
-
-	  # Delete the libtool libraries and symlinks.
-	  for n in $library_names; do
-	    rmfiles="$rmfiles $objdir/$n"
-	  done
-	  test -n "$old_library" && rmfiles="$rmfiles $objdir/$old_library"
-
-	  case "$mode" in
-	  clean)
-	    case "  $library_names " in
-	    # "  " in the beginning catches empty $dlname
-	    *" $dlname "*) ;;
-	    *) rmfiles="$rmfiles $objdir/$dlname" ;;
-	    esac
-	     test -n "$libdir" && rmfiles="$rmfiles $objdir/$name $objdir/${name}i"
-	    ;;
-	  uninstall)
-	    if test -n "$library_names"; then
-	      # Do each command in the postuninstall commands.
-	      cmds=$postuninstall_cmds
-	      save_ifs="$IFS"; IFS='~'
-	      for cmd in $cmds; do
-		IFS="$save_ifs"
-		eval cmd=\"$cmd\"
-		$show "$cmd"
-		$run eval "$cmd"
-		if test "$?" -ne 0 && test "$rmforce" != yes; then
-		  exit_status=1
-		fi
-	      done
-	      IFS="$save_ifs"
-	    fi
-
-	    if test -n "$old_library"; then
-	      # Do each command in the old_postuninstall commands.
-	      cmds=$old_postuninstall_cmds
-	      save_ifs="$IFS"; IFS='~'
-	      for cmd in $cmds; do
-		IFS="$save_ifs"
-		eval cmd=\"$cmd\"
-		$show "$cmd"
-		$run eval "$cmd"
-		if test "$?" -ne 0 && test "$rmforce" != yes; then
-		  exit_status=1
-		fi
-	      done
-	      IFS="$save_ifs"
-	    fi
-	    # FIXME: should reinstall the best remaining shared library.
-	    ;;
-	  esac
-	fi
-	;;
-
-      *.lo)
-	# Possibly a libtool object, so verify it.
-	if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
-
-	  # Read the .lo file
-	  . $dir/$name
-
-	  # Add PIC object to the list of files to remove.
-	  if test -n "$pic_object" \
-	     && test "$pic_object" != none; then
-	    rmfiles="$rmfiles $dir/$pic_object"
-	  fi
-
-	  # Add non-PIC object to the list of files to remove.
-	  if test -n "$non_pic_object" \
-	     && test "$non_pic_object" != none; then
-	    rmfiles="$rmfiles $dir/$non_pic_object"
-	  fi
-	fi
-	;;
-
-      *)
-	if test "$mode" = clean ; then
-	  noexename=$name
-	  case $file in
-	  *.exe)
-	    file=`$echo $file|${SED} 's,.exe$,,'`
-	    noexename=`$echo $name|${SED} 's,.exe$,,'`
-	    # $file with .exe has already been added to rmfiles,
-	    # add $file without .exe
-	    rmfiles="$rmfiles $file"
-	    ;;
-	  esac
-	  # Do a test to see if this is a libtool program.
-	  if (${SED} -e '4q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
-	    relink_command=
-	    . $dir/$noexename
-
-	    # note $name still contains .exe if it was in $file originally
-	    # as does the version of $file that was added into $rmfiles
-	    rmfiles="$rmfiles $objdir/$name $objdir/${name}S.${objext}"
-	    if test "$fast_install" = yes && test -n "$relink_command"; then
-	      rmfiles="$rmfiles $objdir/lt-$name"
-	    fi
-	    if test "X$noexename" != "X$name" ; then
-	      rmfiles="$rmfiles $objdir/lt-${noexename}.c"
-	    fi
-	  fi
-	fi
-	;;
-      esac
-      $show "$rm $rmfiles"
-      $run $rm $rmfiles || exit_status=1
-    done
-    objdir="$origobjdir"
-
-    # Try to remove the ${objdir}s in the directories where we deleted files
-    for dir in $rmdirs; do
-      if test -d "$dir"; then
-	$show "rmdir $dir"
-	$run rmdir $dir >/dev/null 2>&1
-      fi
-    done
-
-    exit $exit_status
-    ;;
-
-  "")
-    $echo "$modename: you must specify a MODE" 1>&2
-    $echo "$generic_help" 1>&2
-    exit $EXIT_FAILURE
-    ;;
-  esac
-
-  if test -z "$exec_cmd"; then
-    $echo "$modename: invalid operation mode \`$mode'" 1>&2
-    $echo "$generic_help" 1>&2
-    exit $EXIT_FAILURE
-  fi
-fi # test -z "$show_help"
-
-if test -n "$exec_cmd"; then
-  eval exec $exec_cmd
-  exit $EXIT_FAILURE
-fi
-
-# We need to display help for each of the modes.
-case $mode in
-"") $echo \
-"Usage: $modename [OPTION]... [MODE-ARG]...
-
-Provide generalized library-building support services.
-
-    --config          show all configuration variables
-    --debug           enable verbose shell tracing
--n, --dry-run         display commands without modifying any files
-    --features        display basic configuration information and exit
-    --finish          same as \`--mode=finish'
-    --help            display this help message and exit
-    --mode=MODE       use operation mode MODE [default=inferred from MODE-ARGS]
-    --quiet           same as \`--silent'
-    --silent          don't print informational messages
-    --tag=TAG         use configuration variables from tag TAG
-    --version         print version information
-
-MODE must be one of the following:
-
-      clean           remove files from the build directory
-      compile         compile a source file into a libtool object
-      execute         automatically set library path, then run a program
-      finish          complete the installation of libtool libraries
-      install         install libraries or executables
-      link            create a library or an executable
-      uninstall       remove libraries from an installed directory
-
-MODE-ARGS vary depending on the MODE.  Try \`$modename --help --mode=MODE' for
-a more detailed description of MODE.
-
-Report bugs to <bug-libtool@gnu.org>."
-  exit $EXIT_SUCCESS
-  ;;
-
-clean)
-  $echo \
-"Usage: $modename [OPTION]... --mode=clean RM [RM-OPTION]... FILE...
-
-Remove files from the build directory.
-
-RM is the name of the program to use to delete files associated with each FILE
-(typically \`/bin/rm').  RM-OPTIONS are options (such as \`-f') to be passed
-to RM.
-
-If FILE is a libtool library, object or program, all the files associated
-with it are deleted. Otherwise, only FILE itself is deleted using RM."
-  ;;
-
-compile)
-  $echo \
-"Usage: $modename [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE
-
-Compile a source file into a libtool library object.
-
-This mode accepts the following additional options:
-
-  -o OUTPUT-FILE    set the output file name to OUTPUT-FILE
-  -prefer-pic       try to building PIC objects only
-  -prefer-non-pic   try to building non-PIC objects only
-  -static           always build a \`.o' file suitable for static linking
-
-COMPILE-COMMAND is a command to be used in creating a \`standard' object file
-from the given SOURCEFILE.
-
-The output file name is determined by removing the directory component from
-SOURCEFILE, then substituting the C source code suffix \`.c' with the
-library object suffix, \`.lo'."
-  ;;
-
-execute)
-  $echo \
-"Usage: $modename [OPTION]... --mode=execute COMMAND [ARGS]...
-
-Automatically set library path, then run a program.
-
-This mode accepts the following additional options:
-
-  -dlopen FILE      add the directory containing FILE to the library path
-
-This mode sets the library path environment variable according to \`-dlopen'
-flags.
-
-If any of the ARGS are libtool executable wrappers, then they are translated
-into their corresponding uninstalled binary, and any of their required library
-directories are added to the library path.
-
-Then, COMMAND is executed, with ARGS as arguments."
-  ;;
-
-finish)
-  $echo \
-"Usage: $modename [OPTION]... --mode=finish [LIBDIR]...
-
-Complete the installation of libtool libraries.
-
-Each LIBDIR is a directory that contains libtool libraries.
-
-The commands that this mode executes may require superuser privileges.  Use
-the \`--dry-run' option if you just want to see what would be executed."
-  ;;
-
-install)
-  $echo \
-"Usage: $modename [OPTION]... --mode=install INSTALL-COMMAND...
-
-Install executables or libraries.
-
-INSTALL-COMMAND is the installation command.  The first component should be
-either the \`install' or \`cp' program.
-
-The rest of the components are interpreted as arguments to that command (only
-BSD-compatible install options are recognized)."
-  ;;
-
-link)
-  $echo \
-"Usage: $modename [OPTION]... --mode=link LINK-COMMAND...
-
-Link object files or libraries together to form another library, or to
-create an executable program.
-
-LINK-COMMAND is a command using the C compiler that you would use to create
-a program from several object files.
-
-The following components of LINK-COMMAND are treated specially:
-
-  -all-static       do not do any dynamic linking at all
-  -avoid-version    do not add a version suffix if possible
-  -dlopen FILE      \`-dlpreopen' FILE if it cannot be dlopened at runtime
-  -dlpreopen FILE   link in FILE and add its symbols to lt_preloaded_symbols
-  -export-dynamic   allow symbols from OUTPUT-FILE to be resolved with dlsym(3)
-  -export-symbols SYMFILE
-                    try to export only the symbols listed in SYMFILE
-  -export-symbols-regex REGEX
-                    try to export only the symbols matching REGEX
-  -LLIBDIR          search LIBDIR for required installed libraries
-  -lNAME            OUTPUT-FILE requires the installed library libNAME
-  -module           build a library that can dlopened
-  -no-fast-install  disable the fast-install mode
-  -no-install       link a not-installable executable
-  -no-undefined     declare that a library does not refer to external symbols
-  -o OUTPUT-FILE    create OUTPUT-FILE from the specified objects
-  -objectlist FILE  Use a list of object files found in FILE to specify objects
-  -precious-files-regex REGEX
-                    don't remove output files matching REGEX
-  -release RELEASE  specify package release information
-  -rpath LIBDIR     the created library will eventually be installed in LIBDIR
-  -R[ ]LIBDIR       add LIBDIR to the runtime path of programs and libraries
-  -static           do not do any dynamic linking of uninstalled libtool libraries
-  -static-libtool-libs
-                    do not do any dynamic linking of libtool libraries
-  -version-info CURRENT[:REVISION[:AGE]]
-                    specify library version info [each variable defaults to 0]
-
-All other options (arguments beginning with \`-') are ignored.
-
-Every other argument is treated as a filename.  Files ending in \`.la' are
-treated as uninstalled libtool libraries, other files are standard or library
-object files.
-
-If the OUTPUT-FILE ends in \`.la', then a libtool library is created,
-only library objects (\`.lo' files) may be specified, and \`-rpath' is
-required, except when creating a convenience library.
-
-If OUTPUT-FILE ends in \`.a' or \`.lib', then a standard library is created
-using \`ar' and \`ranlib', or on Windows using \`lib'.
-
-If OUTPUT-FILE ends in \`.lo' or \`.${objext}', then a reloadable object file
-is created, otherwise an executable program is created."
-  ;;
-
-uninstall)
-  $echo \
-"Usage: $modename [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE...
-
-Remove libraries from an installation directory.
-
-RM is the name of the program to use to delete files associated with each FILE
-(typically \`/bin/rm').  RM-OPTIONS are options (such as \`-f') to be passed
-to RM.
-
-If FILE is a libtool library, all the files associated with it are deleted.
-Otherwise, only FILE itself is deleted using RM."
-  ;;
-
-*)
-  $echo "$modename: invalid operation mode \`$mode'" 1>&2
-  $echo "$help" 1>&2
-  exit $EXIT_FAILURE
-  ;;
-esac
-
-$echo
-$echo "Try \`$modename --help' for more information about other modes."
-
-exit $?
-
-# The TAGs below are defined such that we never get into a situation
-# in which we disable both kinds of libraries.  Given conflicting
-# choices, we go for a static library, that is the most portable,
-# since we can't tell whether shared libraries were disabled because
-# the user asked for that or because the platform doesn't support
-# them.  This is particularly important on AIX, because we don't
-# support having both static and shared libraries enabled at the same
-# time on that platform, so we default to a shared-only configuration.
-# If a disable-shared tag is given, we'll fallback to a static-only
-# configuration.  But we'll never go from static-only to shared-only.
-
-# ### BEGIN LIBTOOL TAG CONFIG: disable-shared
-disable_libs=shared
-# ### END LIBTOOL TAG CONFIG: disable-shared
-
-# ### BEGIN LIBTOOL TAG CONFIG: disable-static
-disable_libs=static
-# ### END LIBTOOL TAG CONFIG: disable-static
-
-# Local Variables:
-# mode:shell-script
-# sh-indentation:2
-# End:
diff -Nru /tmp/bxdedfLB6u/uriparser-0.6.0/Makefile.am /tmp/fLjZ2dz9P3/uriparser-0.7.4/Makefile.am
--- uriparser-0.6.0/Makefile.am	2009-05-19 07:12:08.000000000 +0100
+++ uriparser-0.7.4/Makefile.am	2008-12-23 02:03:15.000000000 +0000
@@ -1,5 +1,7 @@
 ## Makefile.am
-AUTOMAKE_OPTIONS = dist-zip dist-bzip2 subdir-objects
+if URI_GENERATE_DOC
+SUBDIRS = . doc
+endif
 
 lib_LTLIBRARIES = liburiparser.la
 check_PROGRAMS = test/uriparser_test
@@ -8,10 +10,7 @@
 ## man_MANS = uriparser.3
 
 
-
-include_uriparserdir = $(prefix)/include/uriparser
-
-include_uriparser_HEADERS = \
+pkginclude_HEADERS = \
 	include/uriparser/Uri.h \
 	include/uriparser/UriBase.h \
 	include/uriparser/UriDefsAnsi.h \
@@ -20,9 +19,7 @@
 	include/uriparser/UriIp4.h
 
 
-
-liburiparser_la_CFLAGS = -I$(srcdir)/include
-liburiparser_la_LDFLAGS = -version-info 1:0:0
+liburiparser_la_LDFLAGS = -version-info 1:9:0
 
 liburiparser_la_SOURCES = \
 	lib/UriCommon.c \
@@ -39,13 +36,12 @@
 	lib/UriParse.c \
 	lib/UriParseBase.c \
 	lib/UriParseBase.h \
+	lib/UriQuery.c \
 	lib/UriRecompose.c \
 	lib/UriResolve.c \
 	lib/UriShorten.c
 
 
-
-test_uriparser_test_CPPFLAGS = -I$(srcdir)/include
 test_uriparser_test_LDADD = liburiparser.la
 
 test_uriparser_test_SOURCES = \
@@ -64,17 +60,16 @@
 	test/test.cpp
 
 
-
 EXTRA_DIST = \
 	doc/aclocal.m4 \
 	doc/configure \
-	doc/configure.in \
-	doc/Doxyfile \
-	doc/install-sh \
+	doc/configure.ac \
+	doc/Mainpage \
 	doc/Makefile.am \
 	doc/Makefile.in \
-	doc/missing \
-	\
+	doc/preprocess.sh \
+	doc/release.sh.in \
+	doc/rfc1866.htm \
 	doc/rfc3513.htm \
 	doc/rfc3986.htm \
 	doc/rfc3986_grammar_only.txt \
@@ -98,7 +93,12 @@
 	\
 	win32/Code_Blocks/test.cbp \
 	win32/Code_Blocks/uriparser.cbp \
+	win32/Code_Blocks/uriparser.workspace \
+	\
+	win32/MinGW/Makefile \
+	win32/MinGW/Readme.txt \
 	\
 	win32/Visual_Studio_2005/test.vcproj \
 	win32/Visual_Studio_2005/uriparser.sln \
 	win32/Visual_Studio_2005/uriparser.vcproj
+
diff -Nru /tmp/bxdedfLB6u/uriparser-0.6.0/Makefile.in /tmp/fLjZ2dz9P3/uriparser-0.7.4/Makefile.in
--- uriparser-0.6.0/Makefile.in	2009-05-19 07:12:08.000000000 +0100
+++ uriparser-0.7.4/Makefile.in	2008-12-23 02:31:19.000000000 +0000
@@ -1,8 +1,8 @@
-# Makefile.in generated by automake 1.10 from Makefile.am.
+# Makefile.in generated by automake 1.10.1 from Makefile.am.
 # @configure_input@
 
 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006  Free Software Foundation, Inc.
+# 2003, 2004, 2005, 2006, 2007, 2008  Free Software Foundation, Inc.
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -36,13 +36,14 @@
 check_PROGRAMS = test/uriparser_test$(EXEEXT)
 TESTS = test/uriparser_test$(EXEEXT)
 subdir = .
-DIST_COMMON = $(am__configure_deps) $(include_uriparser_HEADERS) \
+DIST_COMMON = $(am__configure_deps) $(pkginclude_HEADERS) \
 	$(srcdir)/Makefile.am $(srcdir)/Makefile.in \
 	$(top_srcdir)/configure $(top_srcdir)/test/CppTest/config.h.in \
-	AUTHORS COPYING ChangeLog config.guess config.sub depcomp \
-	install-sh ltmain.sh missing
+	AUTHORS COPYING ChangeLog THANKS build-aux/config.guess \
+	build-aux/config.sub build-aux/depcomp build-aux/install-sh \
+	build-aux/ltmain.sh build-aux/missing
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/configure.in
+am__aclocal_m4_deps = $(top_srcdir)/configure.ac
 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
 	$(ACLOCAL_M4)
 am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
@@ -56,44 +57,32 @@
     *) f=$$p;; \
   esac;
 am__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
-am__installdirs = "$(DESTDIR)$(libdir)" \
-	"$(DESTDIR)$(include_uriparserdir)"
+am__installdirs = "$(DESTDIR)$(libdir)" "$(DESTDIR)$(pkgincludedir)"
 libLTLIBRARIES_INSTALL = $(INSTALL)
 LTLIBRARIES = $(lib_LTLIBRARIES)
 liburiparser_la_LIBADD =
 am__dirstamp = $(am__leading_dot)dirstamp
-am_liburiparser_la_OBJECTS = lib/liburiparser_la-UriCommon.lo \
-	lib/liburiparser_la-UriCompare.lo \
-	lib/liburiparser_la-UriEscape.lo \
-	lib/liburiparser_la-UriFile.lo lib/liburiparser_la-UriIp4.lo \
-	lib/liburiparser_la-UriIp4Base.lo \
-	lib/liburiparser_la-UriNormalize.lo \
-	lib/liburiparser_la-UriNormalizeBase.lo \
-	lib/liburiparser_la-UriParse.lo \
-	lib/liburiparser_la-UriParseBase.lo \
-	lib/liburiparser_la-UriRecompose.lo \
-	lib/liburiparser_la-UriResolve.lo \
-	lib/liburiparser_la-UriShorten.lo
+am_liburiparser_la_OBJECTS = lib/UriCommon.lo lib/UriCompare.lo \
+	lib/UriEscape.lo lib/UriFile.lo lib/UriIp4.lo \
+	lib/UriIp4Base.lo lib/UriNormalize.lo lib/UriNormalizeBase.lo \
+	lib/UriParse.lo lib/UriParseBase.lo lib/UriQuery.lo \
+	lib/UriRecompose.lo lib/UriResolve.lo lib/UriShorten.lo
 liburiparser_la_OBJECTS = $(am_liburiparser_la_OBJECTS)
 liburiparser_la_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) \
-	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(liburiparser_la_CFLAGS) \
-	$(CFLAGS) $(liburiparser_la_LDFLAGS) $(LDFLAGS) -o $@
+	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
+	$(liburiparser_la_LDFLAGS) $(LDFLAGS) -o $@
 am_test_uriparser_test_OBJECTS =  \
-	test/CppTest/test_uriparser_test-collectoroutput.$(OBJEXT) \
-	test/CppTest/test_uriparser_test-compileroutput.$(OBJEXT) \
-	test/CppTest/test_uriparser_test-htmloutput.$(OBJEXT) \
-	test/CppTest/test_uriparser_test-missing.$(OBJEXT) \
-	test/CppTest/test_uriparser_test-source.$(OBJEXT) \
-	test/CppTest/test_uriparser_test-suite.$(OBJEXT) \
-	test/CppTest/test_uriparser_test-textoutput.$(OBJEXT) \
-	test/CppTest/test_uriparser_test-time.$(OBJEXT) \
-	test/CppTest/test_uriparser_test-utils.$(OBJEXT) \
-	test/test_uriparser_test-FourSuite.$(OBJEXT) \
-	test/test_uriparser_test-test.$(OBJEXT)
+	test/CppTest/collectoroutput.$(OBJEXT) \
+	test/CppTest/compileroutput.$(OBJEXT) \
+	test/CppTest/htmloutput.$(OBJEXT) \
+	test/CppTest/missing.$(OBJEXT) test/CppTest/source.$(OBJEXT) \
+	test/CppTest/suite.$(OBJEXT) test/CppTest/textoutput.$(OBJEXT) \
+	test/CppTest/time.$(OBJEXT) test/CppTest/utils.$(OBJEXT) \
+	test/FourSuite.$(OBJEXT) test/test.$(OBJEXT)
 test_uriparser_test_OBJECTS = $(am_test_uriparser_test_OBJECTS)
 test_uriparser_test_DEPENDENCIES = liburiparser.la
-DEFAULT_INCLUDES = -I. -I$(top_builddir)/test/CppTest@am__isrc@
-depcomp = $(SHELL) $(top_srcdir)/depcomp
+DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/test/CppTest
+depcomp = $(SHELL) $(top_srcdir)/build-aux/depcomp
 am__depfiles_maybe = depfiles
 COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
 	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
@@ -116,10 +105,20 @@
 SOURCES = $(liburiparser_la_SOURCES) $(test_uriparser_test_SOURCES)
 DIST_SOURCES = $(liburiparser_la_SOURCES) \
 	$(test_uriparser_test_SOURCES)
-include_uriparserHEADERS_INSTALL = $(INSTALL_HEADER)
-HEADERS = $(include_uriparser_HEADERS)
+RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
+	html-recursive info-recursive install-data-recursive \
+	install-dvi-recursive install-exec-recursive \
+	install-html-recursive install-info-recursive \
+	install-pdf-recursive install-ps-recursive install-recursive \
+	installcheck-recursive installdirs-recursive pdf-recursive \
+	ps-recursive uninstall-recursive
+pkgincludeHEADERS_INSTALL = $(INSTALL_HEADER)
+HEADERS = $(pkginclude_HEADERS)
+RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
+  distclean-recursive maintainer-clean-recursive
 ETAGS = etags
 CTAGS = ctags
+DIST_SUBDIRS = . doc
 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
 distdir = $(PACKAGE)-$(VERSION)
 top_distdir = $(distdir)
@@ -127,7 +126,8 @@
   { test ! -d $(distdir) \
     || { find $(distdir) -type d ! -perm -200 -exec chmod u+w {} ';' \
          && rm -fr $(distdir); }; }
-DIST_ARCHIVES = $(distdir).tar.gz $(distdir).tar.bz2 $(distdir).zip
+DIST_ARCHIVES = $(distdir).tar.gz $(distdir).tar.bz2 \
+	$(distdir).tar.lzma $(distdir).zip
 GZIP_ENV = --best
 distuninstallcheck_listfiles = find . -type f -print
 distcleancheck_listfiles = find . -type f -print
@@ -150,6 +150,7 @@
 CYGPATH_W = @CYGPATH_W@
 DEFS = @DEFS@
 DEPDIR = @DEPDIR@
+DSYMUTIL = @DSYMUTIL@
 ECHO = @ECHO@
 ECHO_C = @ECHO_C@
 ECHO_N = @ECHO_N@
@@ -172,6 +173,7 @@
 LTLIBOBJS = @LTLIBOBJS@
 MAKEINFO = @MAKEINFO@
 MKDIR_P = @MKDIR_P@
+NMEDIT = @NMEDIT@
 OBJEXT = @OBJEXT@
 PACKAGE = @PACKAGE@
 PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
@@ -233,14 +235,14 @@
 sbindir = @sbindir@
 sharedstatedir = @sharedstatedir@
 srcdir = @srcdir@
+subdirs = @subdirs@
 sysconfdir = @sysconfdir@
 target_alias = @target_alias@
 top_builddir = @top_builddir@
 top_srcdir = @top_srcdir@
-AUTOMAKE_OPTIONS = dist-zip dist-bzip2 subdir-objects
+@URI_GENERATE_DOC_TRUE@SUBDIRS = . doc
 lib_LTLIBRARIES = liburiparser.la
-include_uriparserdir = $(prefix)/include/uriparser
-include_uriparser_HEADERS = \
+pkginclude_HEADERS = \
 	include/uriparser/Uri.h \
 	include/uriparser/UriBase.h \
 	include/uriparser/UriDefsAnsi.h \
@@ -248,8 +250,7 @@
 	include/uriparser/UriDefsUnicode.h \
 	include/uriparser/UriIp4.h
 
-liburiparser_la_CFLAGS = -I$(srcdir)/include
-liburiparser_la_LDFLAGS = -version-info 1:0:0
+liburiparser_la_LDFLAGS = -version-info 1:9:0
 liburiparser_la_SOURCES = \
 	lib/UriCommon.c \
 	lib/UriCommon.h \
@@ -265,11 +266,11 @@
 	lib/UriParse.c \
 	lib/UriParseBase.c \
 	lib/UriParseBase.h \
+	lib/UriQuery.c \
 	lib/UriRecompose.c \
 	lib/UriResolve.c \
 	lib/UriShorten.c
 
-test_uriparser_test_CPPFLAGS = -I$(srcdir)/include
 test_uriparser_test_LDADD = liburiparser.la
 test_uriparser_test_SOURCES = \
 	test/CppTest/collectoroutput.cpp \
@@ -289,13 +290,13 @@
 EXTRA_DIST = \
 	doc/aclocal.m4 \
 	doc/configure \
-	doc/configure.in \
-	doc/Doxyfile \
-	doc/install-sh \
+	doc/configure.ac \
+	doc/Mainpage \
 	doc/Makefile.am \
 	doc/Makefile.in \
-	doc/missing \
-	\
+	doc/preprocess.sh \
+	doc/release.sh.in \
+	doc/rfc1866.htm \
 	doc/rfc3513.htm \
 	doc/rfc3986.htm \
 	doc/rfc3986_grammar_only.txt \
@@ -319,12 +320,16 @@
 	\
 	win32/Code_Blocks/test.cbp \
 	win32/Code_Blocks/uriparser.cbp \
+	win32/Code_Blocks/uriparser.workspace \
+	\
+	win32/MinGW/Makefile \
+	win32/MinGW/Readme.txt \
 	\
 	win32/Visual_Studio_2005/test.vcproj \
 	win32/Visual_Studio_2005/uriparser.sln \
 	win32/Visual_Studio_2005/uriparser.vcproj
 
-all: all-am
+all: all-recursive
 
 .SUFFIXES:
 .SUFFIXES: .c .cpp .lo .o .obj
@@ -384,8 +389,8 @@
 	@list='$(lib_LTLIBRARIES)'; for p in $$list; do \
 	  if test -f $$p; then \
 	    f=$(am__strip_dir) \
-	    echo " $(LIBTOOL) --mode=install $(libLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) '$$p' '$(DESTDIR)$(libdir)/$$f'"; \
-	    $(LIBTOOL) --mode=install $(libLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) "$$p" "$(DESTDIR)$(libdir)/$$f"; \
+	    echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(libLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) '$$p' '$(DESTDIR)$(libdir)/$$f'"; \
+	    $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(libLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) "$$p" "$(DESTDIR)$(libdir)/$$f"; \
 	  else :; fi; \
 	done
 
@@ -393,8 +398,8 @@
 	@$(NORMAL_UNINSTALL)
 	@list='$(lib_LTLIBRARIES)'; for p in $$list; do \
 	  p=$(am__strip_dir) \
-	  echo " $(LIBTOOL) --mode=uninstall rm -f '$(DESTDIR)$(libdir)/$$p'"; \
-	  $(LIBTOOL) --mode=uninstall rm -f "$(DESTDIR)$(libdir)/$$p"; \
+	  echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f '$(DESTDIR)$(libdir)/$$p'"; \
+	  $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f "$(DESTDIR)$(libdir)/$$p"; \
 	done
 
 clean-libLTLIBRARIES:
@@ -411,32 +416,21 @@
 lib/$(DEPDIR)/$(am__dirstamp):
 	@$(MKDIR_P) lib/$(DEPDIR)
 	@: > lib/$(DEPDIR)/$(am__dirstamp)
-lib/liburiparser_la-UriCommon.lo: lib/$(am__dirstamp) \
-	lib/$(DEPDIR)/$(am__dirstamp)
-lib/liburiparser_la-UriCompare.lo: lib/$(am__dirstamp) \
-	lib/$(DEPDIR)/$(am__dirstamp)
-lib/liburiparser_la-UriEscape.lo: lib/$(am__dirstamp) \
-	lib/$(DEPDIR)/$(am__dirstamp)
-lib/liburiparser_la-UriFile.lo: lib/$(am__dirstamp) \
-	lib/$(DEPDIR)/$(am__dirstamp)
-lib/liburiparser_la-UriIp4.lo: lib/$(am__dirstamp) \
-	lib/$(DEPDIR)/$(am__dirstamp)
-lib/liburiparser_la-UriIp4Base.lo: lib/$(am__dirstamp) \
-	lib/$(DEPDIR)/$(am__dirstamp)
-lib/liburiparser_la-UriNormalize.lo: lib/$(am__dirstamp) \
-	lib/$(DEPDIR)/$(am__dirstamp)
-lib/liburiparser_la-UriNormalizeBase.lo: lib/$(am__dirstamp) \
-	lib/$(DEPDIR)/$(am__dirstamp)
-lib/liburiparser_la-UriParse.lo: lib/$(am__dirstamp) \
-	lib/$(DEPDIR)/$(am__dirstamp)
-lib/liburiparser_la-UriParseBase.lo: lib/$(am__dirstamp) \
-	lib/$(DEPDIR)/$(am__dirstamp)
-lib/liburiparser_la-UriRecompose.lo: lib/$(am__dirstamp) \
-	lib/$(DEPDIR)/$(am__dirstamp)
-lib/liburiparser_la-UriResolve.lo: lib/$(am__dirstamp) \
-	lib/$(DEPDIR)/$(am__dirstamp)
-lib/liburiparser_la-UriShorten.lo: lib/$(am__dirstamp) \
+lib/UriCommon.lo: lib/$(am__dirstamp) lib/$(DEPDIR)/$(am__dirstamp)
+lib/UriCompare.lo: lib/$(am__dirstamp) lib/$(DEPDIR)/$(am__dirstamp)
+lib/UriEscape.lo: lib/$(am__dirstamp) lib/$(DEPDIR)/$(am__dirstamp)
+lib/UriFile.lo: lib/$(am__dirstamp) lib/$(DEPDIR)/$(am__dirstamp)
+lib/UriIp4.lo: lib/$(am__dirstamp) lib/$(DEPDIR)/$(am__dirstamp)
+lib/UriIp4Base.lo: lib/$(am__dirstamp) lib/$(DEPDIR)/$(am__dirstamp)
+lib/UriNormalize.lo: lib/$(am__dirstamp) lib/$(DEPDIR)/$(am__dirstamp)
+lib/UriNormalizeBase.lo: lib/$(am__dirstamp) \
 	lib/$(DEPDIR)/$(am__dirstamp)
+lib/UriParse.lo: lib/$(am__dirstamp) lib/$(DEPDIR)/$(am__dirstamp)
+lib/UriParseBase.lo: lib/$(am__dirstamp) lib/$(DEPDIR)/$(am__dirstamp)
+lib/UriQuery.lo: lib/$(am__dirstamp) lib/$(DEPDIR)/$(am__dirstamp)
+lib/UriRecompose.lo: lib/$(am__dirstamp) lib/$(DEPDIR)/$(am__dirstamp)
+lib/UriResolve.lo: lib/$(am__dirstamp) lib/$(DEPDIR)/$(am__dirstamp)
+lib/UriShorten.lo: lib/$(am__dirstamp) lib/$(DEPDIR)/$(am__dirstamp)
 liburiparser.la: $(liburiparser_la_OBJECTS) $(liburiparser_la_DEPENDENCIES) 
 	$(liburiparser_la_LINK) -rpath $(libdir) $(liburiparser_la_OBJECTS) $(liburiparser_la_LIBADD) $(LIBS)
 
@@ -452,32 +446,23 @@
 test/CppTest/$(DEPDIR)/$(am__dirstamp):
 	@$(MKDIR_P) test/CppTest/$(DEPDIR)
 	@: > test/CppTest/$(DEPDIR)/$(am__dirstamp)
-test/CppTest/test_uriparser_test-collectoroutput.$(OBJEXT):  \
-	test/CppTest/$(am__dirstamp) \
+test/CppTest/collectoroutput.$(OBJEXT): test/CppTest/$(am__dirstamp) \
 	test/CppTest/$(DEPDIR)/$(am__dirstamp)
-test/CppTest/test_uriparser_test-compileroutput.$(OBJEXT):  \
-	test/CppTest/$(am__dirstamp) \
+test/CppTest/compileroutput.$(OBJEXT): test/CppTest/$(am__dirstamp) \
 	test/CppTest/$(DEPDIR)/$(am__dirstamp)
-test/CppTest/test_uriparser_test-htmloutput.$(OBJEXT):  \
-	test/CppTest/$(am__dirstamp) \
+test/CppTest/htmloutput.$(OBJEXT): test/CppTest/$(am__dirstamp) \
 	test/CppTest/$(DEPDIR)/$(am__dirstamp)
-test/CppTest/test_uriparser_test-missing.$(OBJEXT):  \
-	test/CppTest/$(am__dirstamp) \
+test/CppTest/missing.$(OBJEXT): test/CppTest/$(am__dirstamp) \
 	test/CppTest/$(DEPDIR)/$(am__dirstamp)
-test/CppTest/test_uriparser_test-source.$(OBJEXT):  \
-	test/CppTest/$(am__dirstamp) \
+test/CppTest/source.$(OBJEXT): test/CppTest/$(am__dirstamp) \
 	test/CppTest/$(DEPDIR)/$(am__dirstamp)
-test/CppTest/test_uriparser_test-suite.$(OBJEXT):  \
-	test/CppTest/$(am__dirstamp) \
+test/CppTest/suite.$(OBJEXT): test/CppTest/$(am__dirstamp) \
 	test/CppTest/$(DEPDIR)/$(am__dirstamp)
-test/CppTest/test_uriparser_test-textoutput.$(OBJEXT):  \
-	test/CppTest/$(am__dirstamp) \
+test/CppTest/textoutput.$(OBJEXT): test/CppTest/$(am__dirstamp) \
 	test/CppTest/$(DEPDIR)/$(am__dirstamp)
-test/CppTest/test_uriparser_test-time.$(OBJEXT):  \
-	test/CppTest/$(am__dirstamp) \
+test/CppTest/time.$(OBJEXT): test/CppTest/$(am__dirstamp) \
 	test/CppTest/$(DEPDIR)/$(am__dirstamp)
-test/CppTest/test_uriparser_test-utils.$(OBJEXT):  \
-	test/CppTest/$(am__dirstamp) \
+test/CppTest/utils.$(OBJEXT): test/CppTest/$(am__dirstamp) \
 	test/CppTest/$(DEPDIR)/$(am__dirstamp)
 test/$(am__dirstamp):
 	@$(MKDIR_P) test
@@ -485,9 +470,9 @@
 test/$(DEPDIR)/$(am__dirstamp):
 	@$(MKDIR_P) test/$(DEPDIR)
 	@: > test/$(DEPDIR)/$(am__dirstamp)
-test/test_uriparser_test-FourSuite.$(OBJEXT): test/$(am__dirstamp) \
+test/FourSuite.$(OBJEXT): test/$(am__dirstamp) \
 	test/$(DEPDIR)/$(am__dirstamp)
-test/test_uriparser_test-test.$(OBJEXT): test/$(am__dirstamp) \
+test/test.$(OBJEXT): test/$(am__dirstamp) \
 	test/$(DEPDIR)/$(am__dirstamp)
 test/uriparser_test$(EXEEXT): $(test_uriparser_test_OBJECTS) $(test_uriparser_test_DEPENDENCIES) test/$(am__dirstamp)
 	@rm -f test/uriparser_test$(EXEEXT)
@@ -495,71 +480,74 @@
 
 mostlyclean-compile:
 	-rm -f *.$(OBJEXT)
-	-rm -f lib/liburiparser_la-UriCommon.$(OBJEXT)
-	-rm -f lib/liburiparser_la-UriCommon.lo
-	-rm -f lib/liburiparser_la-UriCompare.$(OBJEXT)
-	-rm -f lib/liburiparser_la-UriCompare.lo
-	-rm -f lib/liburiparser_la-UriEscape.$(OBJEXT)
-	-rm -f lib/liburiparser_la-UriEscape.lo
-	-rm -f lib/liburiparser_la-UriFile.$(OBJEXT)
-	-rm -f lib/liburiparser_la-UriFile.lo
-	-rm -f lib/liburiparser_la-UriIp4.$(OBJEXT)
-	-rm -f lib/liburiparser_la-UriIp4.lo
-	-rm -f lib/liburiparser_la-UriIp4Base.$(OBJEXT)
-	-rm -f lib/liburiparser_la-UriIp4Base.lo
-	-rm -f lib/liburiparser_la-UriNormalize.$(OBJEXT)
-	-rm -f lib/liburiparser_la-UriNormalize.lo
-	-rm -f lib/liburiparser_la-UriNormalizeBase.$(OBJEXT)
-	-rm -f lib/liburiparser_la-UriNormalizeBase.lo
-	-rm -f lib/liburiparser_la-UriParse.$(OBJEXT)
-	-rm -f lib/liburiparser_la-UriParse.lo
-	-rm -f lib/liburiparser_la-UriParseBase.$(OBJEXT)
-	-rm -f lib/liburiparser_la-UriParseBase.lo
-	-rm -f lib/liburiparser_la-UriRecompose.$(OBJEXT)
-	-rm -f lib/liburiparser_la-UriRecompose.lo
-	-rm -f lib/liburiparser_la-UriResolve.$(OBJEXT)
-	-rm -f lib/liburiparser_la-UriResolve.lo
-	-rm -f lib/liburiparser_la-UriShorten.$(OBJEXT)
-	-rm -f lib/liburiparser_la-UriShorten.lo
-	-rm -f test/CppTest/test_uriparser_test-collectoroutput.$(OBJEXT)
-	-rm -f test/CppTest/test_uriparser_test-compileroutput.$(OBJEXT)
-	-rm -f test/CppTest/test_uriparser_test-htmloutput.$(OBJEXT)
-	-rm -f test/CppTest/test_uriparser_test-missing.$(OBJEXT)
-	-rm -f test/CppTest/test_uriparser_test-source.$(OBJEXT)
-	-rm -f test/CppTest/test_uriparser_test-suite.$(OBJEXT)
-	-rm -f test/CppTest/test_uriparser_test-textoutput.$(OBJEXT)
-	-rm -f test/CppTest/test_uriparser_test-time.$(OBJEXT)
-	-rm -f test/CppTest/test_uriparser_test-utils.$(OBJEXT)
-	-rm -f test/test_uriparser_test-FourSuite.$(OBJEXT)
-	-rm -f test/test_uriparser_test-test.$(OBJEXT)
+	-rm -f lib/UriCommon.$(OBJEXT)
+	-rm -f lib/UriCommon.lo
+	-rm -f lib/UriCompare.$(OBJEXT)
+	-rm -f lib/UriCompare.lo
+	-rm -f lib/UriEscape.$(OBJEXT)
+	-rm -f lib/UriEscape.lo
+	-rm -f lib/UriFile.$(OBJEXT)
+	-rm -f lib/UriFile.lo
+	-rm -f lib/UriIp4.$(OBJEXT)
+	-rm -f lib/UriIp4.lo
+	-rm -f lib/UriIp4Base.$(OBJEXT)
+	-rm -f lib/UriIp4Base.lo
+	-rm -f lib/UriNormalize.$(OBJEXT)
+	-rm -f lib/UriNormalize.lo
+	-rm -f lib/UriNormalizeBase.$(OBJEXT)
+	-rm -f lib/UriNormalizeBase.lo
+	-rm -f lib/UriParse.$(OBJEXT)
+	-rm -f lib/UriParse.lo
+	-rm -f lib/UriParseBase.$(OBJEXT)
+	-rm -f lib/UriParseBase.lo
+	-rm -f lib/UriQuery.$(OBJEXT)
+	-rm -f lib/UriQuery.lo
+	-rm -f lib/UriRecompose.$(OBJEXT)
+	-rm -f lib/UriRecompose.lo
+	-rm -f lib/UriResolve.$(OBJEXT)
+	-rm -f lib/UriResolve.lo
+	-rm -f lib/UriShorten.$(OBJEXT)
+	-rm -f lib/UriShorten.lo
+	-rm -f test/CppTest/collectoroutput.$(OBJEXT)
+	-rm -f test/CppTest/compileroutput.$(OBJEXT)
+	-rm -f test/CppTest/htmloutput.$(OBJEXT)
+	-rm -f test/CppTest/missing.$(OBJEXT)
+	-rm -f test/CppTest/source.$(OBJEXT)
+	-rm -f test/CppTest/suite.$(OBJEXT)
+	-rm -f test/CppTest/textoutput.$(OBJEXT)
+	-rm -f test/CppTest/time.$(OBJEXT)
+	-rm -f test/CppTest/utils.$(OBJEXT)
+	-rm -f test/FourSuite.$(OBJEXT)
+	-rm -f test/test.$(OBJEXT)
 
 distclean-compile:
 	-rm -f *.tab.c
 
-@AMDEP_TRUE@@am__include@ @am__quote@lib/$(DEPDIR)/liburiparser_la-UriCommon.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@lib/$(DEPDIR)/liburiparser_la-UriCompare.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@lib/$(DEPDIR)/liburiparser_la-UriEscape.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@lib/$(DEPDIR)/liburiparser_la-UriFile.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@lib/$(DEPDIR)/liburiparser_la-UriIp4.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@lib/$(DEPDIR)/liburiparser_la-UriIp4Base.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@lib/$(DEPDIR)/liburiparser_la-UriNormalize.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@lib/$(DEPDIR)/liburiparser_la-UriNormalizeBase.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@lib/$(DEPDIR)/liburiparser_la-UriParse.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@lib/$(DEPDIR)/liburiparser_la-UriParseBase.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@lib/$(DEPDIR)/liburiparser_la-UriRecompose.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@lib/$(DEPDIR)/liburiparser_la-UriResolve.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@lib/$(DEPDIR)/liburiparser_la-UriShorten.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@test/$(DEPDIR)/test_uriparser_test-FourSuite.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@test/$(DEPDIR)/test_uriparser_test-test.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@test/CppTest/$(DEPDIR)/test_uriparser_test-collectoroutput.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@test/CppTest/$(DEPDIR)/test_uriparser_test-compileroutput.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@test/CppTest/$(DEPDIR)/test_uriparser_test-htmloutput.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@test/CppTest/$(DEPDIR)/test_uriparser_test-missing.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@test/CppTest/$(DEPDIR)/test_uriparser_test-source.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@test/CppTest/$(DEPDIR)/test_uriparser_test-suite.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@test/CppTest/$(DEPDIR)/test_uriparser_test-textoutput.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@test/CppTest/$(DEPDIR)/test_uriparser_test-time.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@test/CppTest/$(DEPDIR)/test_uriparser_test-utils.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@lib/$(DEPDIR)/UriCommon.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@lib/$(DEPDIR)/UriCompare.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@lib/$(DEPDIR)/UriEscape.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@lib/$(DEPDIR)/UriFile.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@lib/$(DEPDIR)/UriIp4.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@lib/$(DEPDIR)/UriIp4Base.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@lib/$(DEPDIR)/UriNormalize.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@lib/$(DEPDIR)/UriNormalizeBase.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@lib/$(DEPDIR)/UriParse.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@lib/$(DEPDIR)/UriParseBase.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@lib/$(DEPDIR)/UriQuery.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@lib/$(DEPDIR)/UriRecompose.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@lib/$(DEPDIR)/UriResolve.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@lib/$(DEPDIR)/UriShorten.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@test/$(DEPDIR)/FourSuite.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@test/$(DEPDIR)/test.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@test/CppTest/$(DEPDIR)/collectoroutput.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@test/CppTest/$(DEPDIR)/compileroutput.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@test/CppTest/$(DEPDIR)/htmloutput.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@test/CppTest/$(DEPDIR)/missing.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@test/CppTest/$(DEPDIR)/source.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@test/CppTest/$(DEPDIR)/suite.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@test/CppTest/$(DEPDIR)/textoutput.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@test/CppTest/$(DEPDIR)/time.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@test/CppTest/$(DEPDIR)/utils.Po@am__quote@
 
 .c.o:
 @am__fastdepCC_TRUE@	depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.o$$||'`;\
@@ -585,97 +573,6 @@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(LTCOMPILE) -c -o $@ $<
 
-lib/liburiparser_la-UriCommon.lo: lib/UriCommon.c
-@am__fastdepCC_TRUE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(liburiparser_la_CFLAGS) $(CFLAGS) -MT lib/liburiparser_la-UriCommon.lo -MD -MP -MF lib/$(DEPDIR)/liburiparser_la-UriCommon.Tpo -c -o lib/liburiparser_la-UriCommon.lo `test -f 'lib/UriCommon.c' || echo '$(srcdir)/'`lib/UriCommon.c
-@am__fastdepCC_TRUE@	mv -f lib/$(DEPDIR)/liburiparser_la-UriCommon.Tpo lib/$(DEPDIR)/liburiparser_la-UriCommon.Plo
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='lib/UriCommon.c' object='lib/liburiparser_la-UriCommon.lo' libtool=yes @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(liburiparser_la_CFLAGS) $(CFLAGS) -c -o lib/liburiparser_la-UriCommon.lo `test -f 'lib/UriCommon.c' || echo '$(srcdir)/'`lib/UriCommon.c
-
-lib/liburiparser_la-UriCompare.lo: lib/UriCompare.c
-@am__fastdepCC_TRUE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(liburiparser_la_CFLAGS) $(CFLAGS) -MT lib/liburiparser_la-UriCompare.lo -MD -MP -MF lib/$(DEPDIR)/liburiparser_la-UriCompare.Tpo -c -o lib/liburiparser_la-UriCompare.lo `test -f 'lib/UriCompare.c' || echo '$(srcdir)/'`lib/UriCompare.c
-@am__fastdepCC_TRUE@	mv -f lib/$(DEPDIR)/liburiparser_la-UriCompare.Tpo lib/$(DEPDIR)/liburiparser_la-UriCompare.Plo
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='lib/UriCompare.c' object='lib/liburiparser_la-UriCompare.lo' libtool=yes @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(liburiparser_la_CFLAGS) $(CFLAGS) -c -o lib/liburiparser_la-UriCompare.lo `test -f 'lib/UriCompare.c' || echo '$(srcdir)/'`lib/UriCompare.c
-
-lib/liburiparser_la-UriEscape.lo: lib/UriEscape.c
-@am__fastdepCC_TRUE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(liburiparser_la_CFLAGS) $(CFLAGS) -MT lib/liburiparser_la-UriEscape.lo -MD -MP -MF lib/$(DEPDIR)/liburiparser_la-UriEscape.Tpo -c -o lib/liburiparser_la-UriEscape.lo `test -f 'lib/UriEscape.c' || echo '$(srcdir)/'`lib/UriEscape.c
-@am__fastdepCC_TRUE@	mv -f lib/$(DEPDIR)/liburiparser_la-UriEscape.Tpo lib/$(DEPDIR)/liburiparser_la-UriEscape.Plo
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='lib/UriEscape.c' object='lib/liburiparser_la-UriEscape.lo' libtool=yes @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(liburiparser_la_CFLAGS) $(CFLAGS) -c -o lib/liburiparser_la-UriEscape.lo `test -f 'lib/UriEscape.c' || echo '$(srcdir)/'`lib/UriEscape.c
-
-lib/liburiparser_la-UriFile.lo: lib/UriFile.c
-@am__fastdepCC_TRUE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(liburiparser_la_CFLAGS) $(CFLAGS) -MT lib/liburiparser_la-UriFile.lo -MD -MP -MF lib/$(DEPDIR)/liburiparser_la-UriFile.Tpo -c -o lib/liburiparser_la-UriFile.lo `test -f 'lib/UriFile.c' || echo '$(srcdir)/'`lib/UriFile.c
-@am__fastdepCC_TRUE@	mv -f lib/$(DEPDIR)/liburiparser_la-UriFile.Tpo lib/$(DEPDIR)/liburiparser_la-UriFile.Plo
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='lib/UriFile.c' object='lib/liburiparser_la-UriFile.lo' libtool=yes @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(liburiparser_la_CFLAGS) $(CFLAGS) -c -o lib/liburiparser_la-UriFile.lo `test -f 'lib/UriFile.c' || echo '$(srcdir)/'`lib/UriFile.c
-
-lib/liburiparser_la-UriIp4.lo: lib/UriIp4.c
-@am__fastdepCC_TRUE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(liburiparser_la_CFLAGS) $(CFLAGS) -MT lib/liburiparser_la-UriIp4.lo -MD -MP -MF lib/$(DEPDIR)/liburiparser_la-UriIp4.Tpo -c -o lib/liburiparser_la-UriIp4.lo `test -f 'lib/UriIp4.c' || echo '$(srcdir)/'`lib/UriIp4.c
-@am__fastdepCC_TRUE@	mv -f lib/$(DEPDIR)/liburiparser_la-UriIp4.Tpo lib/$(DEPDIR)/liburiparser_la-UriIp4.Plo
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='lib/UriIp4.c' object='lib/liburiparser_la-UriIp4.lo' libtool=yes @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(liburiparser_la_CFLAGS) $(CFLAGS) -c -o lib/liburiparser_la-UriIp4.lo `test -f 'lib/UriIp4.c' || echo '$(srcdir)/'`lib/UriIp4.c
-
-lib/liburiparser_la-UriIp4Base.lo: lib/UriIp4Base.c
-@am__fastdepCC_TRUE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(liburiparser_la_CFLAGS) $(CFLAGS) -MT lib/liburiparser_la-UriIp4Base.lo -MD -MP -MF lib/$(DEPDIR)/liburiparser_la-UriIp4Base.Tpo -c -o lib/liburiparser_la-UriIp4Base.lo `test -f 'lib/UriIp4Base.c' || echo '$(srcdir)/'`lib/UriIp4Base.c
-@am__fastdepCC_TRUE@	mv -f lib/$(DEPDIR)/liburiparser_la-UriIp4Base.Tpo lib/$(DEPDIR)/liburiparser_la-UriIp4Base.Plo
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='lib/UriIp4Base.c' object='lib/liburiparser_la-UriIp4Base.lo' libtool=yes @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(liburiparser_la_CFLAGS) $(CFLAGS) -c -o lib/liburiparser_la-UriIp4Base.lo `test -f 'lib/UriIp4Base.c' || echo '$(srcdir)/'`lib/UriIp4Base.c
-
-lib/liburiparser_la-UriNormalize.lo: lib/UriNormalize.c
-@am__fastdepCC_TRUE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(liburiparser_la_CFLAGS) $(CFLAGS) -MT lib/liburiparser_la-UriNormalize.lo -MD -MP -MF lib/$(DEPDIR)/liburiparser_la-UriNormalize.Tpo -c -o lib/liburiparser_la-UriNormalize.lo `test -f 'lib/UriNormalize.c' || echo '$(srcdir)/'`lib/UriNormalize.c
-@am__fastdepCC_TRUE@	mv -f lib/$(DEPDIR)/liburiparser_la-UriNormalize.Tpo lib/$(DEPDIR)/liburiparser_la-UriNormalize.Plo
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='lib/UriNormalize.c' object='lib/liburiparser_la-UriNormalize.lo' libtool=yes @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(liburiparser_la_CFLAGS) $(CFLAGS) -c -o lib/liburiparser_la-UriNormalize.lo `test -f 'lib/UriNormalize.c' || echo '$(srcdir)/'`lib/UriNormalize.c
-
-lib/liburiparser_la-UriNormalizeBase.lo: lib/UriNormalizeBase.c
-@am__fastdepCC_TRUE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(liburiparser_la_CFLAGS) $(CFLAGS) -MT lib/liburiparser_la-UriNormalizeBase.lo -MD -MP -MF lib/$(DEPDIR)/liburiparser_la-UriNormalizeBase.Tpo -c -o lib/liburiparser_la-UriNormalizeBase.lo `test -f 'lib/UriNormalizeBase.c' || echo '$(srcdir)/'`lib/UriNormalizeBase.c
-@am__fastdepCC_TRUE@	mv -f lib/$(DEPDIR)/liburiparser_la-UriNormalizeBase.Tpo lib/$(DEPDIR)/liburiparser_la-UriNormalizeBase.Plo
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='lib/UriNormalizeBase.c' object='lib/liburiparser_la-UriNormalizeBase.lo' libtool=yes @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(liburiparser_la_CFLAGS) $(CFLAGS) -c -o lib/liburiparser_la-UriNormalizeBase.lo `test -f 'lib/UriNormalizeBase.c' || echo '$(srcdir)/'`lib/UriNormalizeBase.c
-
-lib/liburiparser_la-UriParse.lo: lib/UriParse.c
-@am__fastdepCC_TRUE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(liburiparser_la_CFLAGS) $(CFLAGS) -MT lib/liburiparser_la-UriParse.lo -MD -MP -MF lib/$(DEPDIR)/liburiparser_la-UriParse.Tpo -c -o lib/liburiparser_la-UriParse.lo `test -f 'lib/UriParse.c' || echo '$(srcdir)/'`lib/UriParse.c
-@am__fastdepCC_TRUE@	mv -f lib/$(DEPDIR)/liburiparser_la-UriParse.Tpo lib/$(DEPDIR)/liburiparser_la-UriParse.Plo
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='lib/UriParse.c' object='lib/liburiparser_la-UriParse.lo' libtool=yes @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(liburiparser_la_CFLAGS) $(CFLAGS) -c -o lib/liburiparser_la-UriParse.lo `test -f 'lib/UriParse.c' || echo '$(srcdir)/'`lib/UriParse.c
-
-lib/liburiparser_la-UriParseBase.lo: lib/UriParseBase.c
-@am__fastdepCC_TRUE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(liburiparser_la_CFLAGS) $(CFLAGS) -MT lib/liburiparser_la-UriParseBase.lo -MD -MP -MF lib/$(DEPDIR)/liburiparser_la-UriParseBase.Tpo -c -o lib/liburiparser_la-UriParseBase.lo `test -f 'lib/UriParseBase.c' || echo '$(srcdir)/'`lib/UriParseBase.c
-@am__fastdepCC_TRUE@	mv -f lib/$(DEPDIR)/liburiparser_la-UriParseBase.Tpo lib/$(DEPDIR)/liburiparser_la-UriParseBase.Plo
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='lib/UriParseBase.c' object='lib/liburiparser_la-UriParseBase.lo' libtool=yes @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(liburiparser_la_CFLAGS) $(CFLAGS) -c -o lib/liburiparser_la-UriParseBase.lo `test -f 'lib/UriParseBase.c' || echo '$(srcdir)/'`lib/UriParseBase.c
-
-lib/liburiparser_la-UriRecompose.lo: lib/UriRecompose.c
-@am__fastdepCC_TRUE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(liburiparser_la_CFLAGS) $(CFLAGS) -MT lib/liburiparser_la-UriRecompose.lo -MD -MP -MF lib/$(DEPDIR)/liburiparser_la-UriRecompose.Tpo -c -o lib/liburiparser_la-UriRecompose.lo `test -f 'lib/UriRecompose.c' || echo '$(srcdir)/'`lib/UriRecompose.c
-@am__fastdepCC_TRUE@	mv -f lib/$(DEPDIR)/liburiparser_la-UriRecompose.Tpo lib/$(DEPDIR)/liburiparser_la-UriRecompose.Plo
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='lib/UriRecompose.c' object='lib/liburiparser_la-UriRecompose.lo' libtool=yes @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(liburiparser_la_CFLAGS) $(CFLAGS) -c -o lib/liburiparser_la-UriRecompose.lo `test -f 'lib/UriRecompose.c' || echo '$(srcdir)/'`lib/UriRecompose.c
-
-lib/liburiparser_la-UriResolve.lo: lib/UriResolve.c
-@am__fastdepCC_TRUE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(liburiparser_la_CFLAGS) $(CFLAGS) -MT lib/liburiparser_la-UriResolve.lo -MD -MP -MF lib/$(DEPDIR)/liburiparser_la-UriResolve.Tpo -c -o lib/liburiparser_la-UriResolve.lo `test -f 'lib/UriResolve.c' || echo '$(srcdir)/'`lib/UriResolve.c
-@am__fastdepCC_TRUE@	mv -f lib/$(DEPDIR)/liburiparser_la-UriResolve.Tpo lib/$(DEPDIR)/liburiparser_la-UriResolve.Plo
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='lib/UriResolve.c' object='lib/liburiparser_la-UriResolve.lo' libtool=yes @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(liburiparser_la_CFLAGS) $(CFLAGS) -c -o lib/liburiparser_la-UriResolve.lo `test -f 'lib/UriResolve.c' || echo '$(srcdir)/'`lib/UriResolve.c
-
-lib/liburiparser_la-UriShorten.lo: lib/UriShorten.c
-@am__fastdepCC_TRUE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(liburiparser_la_CFLAGS) $(CFLAGS) -MT lib/liburiparser_la-UriShorten.lo -MD -MP -MF lib/$(DEPDIR)/liburiparser_la-UriShorten.Tpo -c -o lib/liburiparser_la-UriShorten.lo `test -f 'lib/UriShorten.c' || echo '$(srcdir)/'`lib/UriShorten.c
-@am__fastdepCC_TRUE@	mv -f lib/$(DEPDIR)/liburiparser_la-UriShorten.Tpo lib/$(DEPDIR)/liburiparser_la-UriShorten.Plo
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='lib/UriShorten.c' object='lib/liburiparser_la-UriShorten.lo' libtool=yes @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(liburiparser_la_CFLAGS) $(CFLAGS) -c -o lib/liburiparser_la-UriShorten.lo `test -f 'lib/UriShorten.c' || echo '$(srcdir)/'`lib/UriShorten.c
-
 .cpp.o:
 @am__fastdepCXX_TRUE@	depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.o$$||'`;\
 @am__fastdepCXX_TRUE@	$(CXXCOMPILE) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ $< &&\
@@ -700,185 +597,102 @@
 @AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCXX_FALSE@	$(LTCXXCOMPILE) -c -o $@ $<
 
-test/CppTest/test_uriparser_test-collectoroutput.o: test/CppTest/collectoroutput.cpp
-@am__fastdepCXX_TRUE@	$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(test_uriparser_test_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT test/CppTest/test_uriparser_test-collectoroutput.o -MD -MP -MF test/CppTest/$(DEPDIR)/test_uriparser_test-collectoroutput.Tpo -c -o test/CppTest/test_uriparser_test-collectoroutput.o `test -f 'test/CppTest/collectoroutput.cpp' || echo '$(srcdir)/'`test/CppTest/collectoroutput.cpp
-@am__fastdepCXX_TRUE@	mv -f test/CppTest/$(DEPDIR)/test_uriparser_test-collectoroutput.Tpo test/CppTest/$(DEPDIR)/test_uriparser_test-collectoroutput.Po
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@	source='test/CppTest/collectoroutput.cpp' object='test/CppTest/test_uriparser_test-collectoroutput.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCXX_FALSE@	$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(test_uriparser_test_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o test/CppTest/test_uriparser_test-collectoroutput.o `test -f 'test/CppTest/collectoroutput.cpp' || echo '$(srcdir)/'`test/CppTest/collectoroutput.cpp
-
-test/CppTest/test_uriparser_test-collectoroutput.obj: test/CppTest/collectoroutput.cpp
-@am__fastdepCXX_TRUE@	$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(test_uriparser_test_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT test/CppTest/test_uriparser_test-collectoroutput.obj -MD -MP -MF test/CppTest/$(DEPDIR)/test_uriparser_test-collectoroutput.Tpo -c -o test/CppTest/test_uriparser_test-collectoroutput.obj `if test -f 'test/CppTest/collectoroutput.cpp'; then $(CYGPATH_W) 'test/CppTest/collectoroutput.cpp'; else $(CYGPATH_W) '$(srcdir)/test/CppTest/collectoroutput.cpp'; fi`
-@am__fastdepCXX_TRUE@	mv -f test/CppTest/$(DEPDIR)/test_uriparser_test-collectoroutput.Tpo test/CppTest/$(DEPDIR)/test_uriparser_test-collectoroutput.Po
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@	source='test/CppTest/collectoroutput.cpp' object='test/CppTest/test_uriparser_test-collectoroutput.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCXX_FALSE@	$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(test_uriparser_test_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o test/CppTest/test_uriparser_test-collectoroutput.obj `if test -f 'test/CppTest/collectoroutput.cpp'; then $(CYGPATH_W) 'test/CppTest/collectoroutput.cpp'; else $(CYGPATH_W) '$(srcdir)/test/CppTest/collectoroutput.cpp'; fi`
-
-test/CppTest/test_uriparser_test-compileroutput.o: test/CppTest/compileroutput.cpp
-@am__fastdepCXX_TRUE@	$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(test_uriparser_test_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT test/CppTest/test_uriparser_test-compileroutput.o -MD -MP -MF test/CppTest/$(DEPDIR)/test_uriparser_test-compileroutput.Tpo -c -o test/CppTest/test_uriparser_test-compileroutput.o `test -f 'test/CppTest/compileroutput.cpp' || echo '$(srcdir)/'`test/CppTest/compileroutput.cpp
-@am__fastdepCXX_TRUE@	mv -f test/CppTest/$(DEPDIR)/test_uriparser_test-compileroutput.Tpo test/CppTest/$(DEPDIR)/test_uriparser_test-compileroutput.Po
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@	source='test/CppTest/compileroutput.cpp' object='test/CppTest/test_uriparser_test-compileroutput.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCXX_FALSE@	$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(test_uriparser_test_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o test/CppTest/test_uriparser_test-compileroutput.o `test -f 'test/CppTest/compileroutput.cpp' || echo '$(srcdir)/'`test/CppTest/compileroutput.cpp
-
-test/CppTest/test_uriparser_test-compileroutput.obj: test/CppTest/compileroutput.cpp
-@am__fastdepCXX_TRUE@	$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(test_uriparser_test_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT test/CppTest/test_uriparser_test-compileroutput.obj -MD -MP -MF test/CppTest/$(DEPDIR)/test_uriparser_test-compileroutput.Tpo -c -o test/CppTest/test_uriparser_test-compileroutput.obj `if test -f 'test/CppTest/compileroutput.cpp'; then $(CYGPATH_W) 'test/CppTest/compileroutput.cpp'; else $(CYGPATH_W) '$(srcdir)/test/CppTest/compileroutput.cpp'; fi`
-@am__fastdepCXX_TRUE@	mv -f test/CppTest/$(DEPDIR)/test_uriparser_test-compileroutput.Tpo test/CppTest/$(DEPDIR)/test_uriparser_test-compileroutput.Po
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@	source='test/CppTest/compileroutput.cpp' object='test/CppTest/test_uriparser_test-compileroutput.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCXX_FALSE@	$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(test_uriparser_test_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o test/CppTest/test_uriparser_test-compileroutput.obj `if test -f 'test/CppTest/compileroutput.cpp'; then $(CYGPATH_W) 'test/CppTest/compileroutput.cpp'; else $(CYGPATH_W) '$(srcdir)/test/CppTest/compileroutput.cpp'; fi`
-
-test/CppTest/test_uriparser_test-htmloutput.o: test/CppTest/htmloutput.cpp
-@am__fastdepCXX_TRUE@	$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(test_uriparser_test_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT test/CppTest/test_uriparser_test-htmloutput.o -MD -MP -MF test/CppTest/$(DEPDIR)/test_uriparser_test-htmloutput.Tpo -c -o test/CppTest/test_uriparser_test-htmloutput.o `test -f 'test/CppTest/htmloutput.cpp' || echo '$(srcdir)/'`test/CppTest/htmloutput.cpp
-@am__fastdepCXX_TRUE@	mv -f test/CppTest/$(DEPDIR)/test_uriparser_test-htmloutput.Tpo test/CppTest/$(DEPDIR)/test_uriparser_test-htmloutput.Po
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@	source='test/CppTest/htmloutput.cpp' object='test/CppTest/test_uriparser_test-htmloutput.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCXX_FALSE@	$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(test_uriparser_test_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o test/CppTest/test_uriparser_test-htmloutput.o `test -f 'test/CppTest/htmloutput.cpp' || echo '$(srcdir)/'`test/CppTest/htmloutput.cpp
-
-test/CppTest/test_uriparser_test-htmloutput.obj: test/CppTest/htmloutput.cpp
-@am__fastdepCXX_TRUE@	$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(test_uriparser_test_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT test/CppTest/test_uriparser_test-htmloutput.obj -MD -MP -MF test/CppTest/$(DEPDIR)/test_uriparser_test-htmloutput.Tpo -c -o test/CppTest/test_uriparser_test-htmloutput.obj `if test -f 'test/CppTest/htmloutput.cpp'; then $(CYGPATH_W) 'test/CppTest/htmloutput.cpp'; else $(CYGPATH_W) '$(srcdir)/test/CppTest/htmloutput.cpp'; fi`
-@am__fastdepCXX_TRUE@	mv -f test/CppTest/$(DEPDIR)/test_uriparser_test-htmloutput.Tpo test/CppTest/$(DEPDIR)/test_uriparser_test-htmloutput.Po
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@	source='test/CppTest/htmloutput.cpp' object='test/CppTest/test_uriparser_test-htmloutput.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCXX_FALSE@	$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(test_uriparser_test_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o test/CppTest/test_uriparser_test-htmloutput.obj `if test -f 'test/CppTest/htmloutput.cpp'; then $(CYGPATH_W) 'test/CppTest/htmloutput.cpp'; else $(CYGPATH_W) '$(srcdir)/test/CppTest/htmloutput.cpp'; fi`
-
-test/CppTest/test_uriparser_test-missing.o: test/CppTest/missing.cpp
-@am__fastdepCXX_TRUE@	$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(test_uriparser_test_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT test/CppTest/test_uriparser_test-missing.o -MD -MP -MF test/CppTest/$(DEPDIR)/test_uriparser_test-missing.Tpo -c -o test/CppTest/test_uriparser_test-missing.o `test -f 'test/CppTest/missing.cpp' || echo '$(srcdir)/'`test/CppTest/missing.cpp
-@am__fastdepCXX_TRUE@	mv -f test/CppTest/$(DEPDIR)/test_uriparser_test-missing.Tpo test/CppTest/$(DEPDIR)/test_uriparser_test-missing.Po
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@	source='test/CppTest/missing.cpp' object='test/CppTest/test_uriparser_test-missing.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCXX_FALSE@	$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(test_uriparser_test_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o test/CppTest/test_uriparser_test-missing.o `test -f 'test/CppTest/missing.cpp' || echo '$(srcdir)/'`test/CppTest/missing.cpp
-
-test/CppTest/test_uriparser_test-missing.obj: test/CppTest/missing.cpp
-@am__fastdepCXX_TRUE@	$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(test_uriparser_test_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT test/CppTest/test_uriparser_test-missing.obj -MD -MP -MF test/CppTest/$(DEPDIR)/test_uriparser_test-missing.Tpo -c -o test/CppTest/test_uriparser_test-missing.obj `if test -f 'test/CppTest/missing.cpp'; then $(CYGPATH_W) 'test/CppTest/missing.cpp'; else $(CYGPATH_W) '$(srcdir)/test/CppTest/missing.cpp'; fi`
-@am__fastdepCXX_TRUE@	mv -f test/CppTest/$(DEPDIR)/test_uriparser_test-missing.Tpo test/CppTest/$(DEPDIR)/test_uriparser_test-missing.Po
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@	source='test/CppTest/missing.cpp' object='test/CppTest/test_uriparser_test-missing.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCXX_FALSE@	$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(test_uriparser_test_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o test/CppTest/test_uriparser_test-missing.obj `if test -f 'test/CppTest/missing.cpp'; then $(CYGPATH_W) 'test/CppTest/missing.cpp'; else $(CYGPATH_W) '$(srcdir)/test/CppTest/missing.cpp'; fi`
-
-test/CppTest/test_uriparser_test-source.o: test/CppTest/source.cpp
-@am__fastdepCXX_TRUE@	$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(test_uriparser_test_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT test/CppTest/test_uriparser_test-source.o -MD -MP -MF test/CppTest/$(DEPDIR)/test_uriparser_test-source.Tpo -c -o test/CppTest/test_uriparser_test-source.o `test -f 'test/CppTest/source.cpp' || echo '$(srcdir)/'`test/CppTest/source.cpp
-@am__fastdepCXX_TRUE@	mv -f test/CppTest/$(DEPDIR)/test_uriparser_test-source.Tpo test/CppTest/$(DEPDIR)/test_uriparser_test-source.Po
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@	source='test/CppTest/source.cpp' object='test/CppTest/test_uriparser_test-source.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCXX_FALSE@	$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(test_uriparser_test_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o test/CppTest/test_uriparser_test-source.o `test -f 'test/CppTest/source.cpp' || echo '$(srcdir)/'`test/CppTest/source.cpp
-
-test/CppTest/test_uriparser_test-source.obj: test/CppTest/source.cpp
-@am__fastdepCXX_TRUE@	$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(test_uriparser_test_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT test/CppTest/test_uriparser_test-source.obj -MD -MP -MF test/CppTest/$(DEPDIR)/test_uriparser_test-source.Tpo -c -o test/CppTest/test_uriparser_test-source.obj `if test -f 'test/CppTest/source.cpp'; then $(CYGPATH_W) 'test/CppTest/source.cpp'; else $(CYGPATH_W) '$(srcdir)/test/CppTest/source.cpp'; fi`
-@am__fastdepCXX_TRUE@	mv -f test/CppTest/$(DEPDIR)/test_uriparser_test-source.Tpo test/CppTest/$(DEPDIR)/test_uriparser_test-source.Po
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@	source='test/CppTest/source.cpp' object='test/CppTest/test_uriparser_test-source.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCXX_FALSE@	$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(test_uriparser_test_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o test/CppTest/test_uriparser_test-source.obj `if test -f 'test/CppTest/source.cpp'; then $(CYGPATH_W) 'test/CppTest/source.cpp'; else $(CYGPATH_W) '$(srcdir)/test/CppTest/source.cpp'; fi`
-
-test/CppTest/test_uriparser_test-suite.o: test/CppTest/suite.cpp
-@am__fastdepCXX_TRUE@	$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(test_uriparser_test_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT test/CppTest/test_uriparser_test-suite.o -MD -MP -MF test/CppTest/$(DEPDIR)/test_uriparser_test-suite.Tpo -c -o test/CppTest/test_uriparser_test-suite.o `test -f 'test/CppTest/suite.cpp' || echo '$(srcdir)/'`test/CppTest/suite.cpp
-@am__fastdepCXX_TRUE@	mv -f test/CppTest/$(DEPDIR)/test_uriparser_test-suite.Tpo test/CppTest/$(DEPDIR)/test_uriparser_test-suite.Po
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@	source='test/CppTest/suite.cpp' object='test/CppTest/test_uriparser_test-suite.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCXX_FALSE@	$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(test_uriparser_test_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o test/CppTest/test_uriparser_test-suite.o `test -f 'test/CppTest/suite.cpp' || echo '$(srcdir)/'`test/CppTest/suite.cpp
-
-test/CppTest/test_uriparser_test-suite.obj: test/CppTest/suite.cpp
-@am__fastdepCXX_TRUE@	$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(test_uriparser_test_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT test/CppTest/test_uriparser_test-suite.obj -MD -MP -MF test/CppTest/$(DEPDIR)/test_uriparser_test-suite.Tpo -c -o test/CppTest/test_uriparser_test-suite.obj `if test -f 'test/CppTest/suite.cpp'; then $(CYGPATH_W) 'test/CppTest/suite.cpp'; else $(CYGPATH_W) '$(srcdir)/test/CppTest/suite.cpp'; fi`
-@am__fastdepCXX_TRUE@	mv -f test/CppTest/$(DEPDIR)/test_uriparser_test-suite.Tpo test/CppTest/$(DEPDIR)/test_uriparser_test-suite.Po
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@	source='test/CppTest/suite.cpp' object='test/CppTest/test_uriparser_test-suite.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCXX_FALSE@	$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(test_uriparser_test_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o test/CppTest/test_uriparser_test-suite.obj `if test -f 'test/CppTest/suite.cpp'; then $(CYGPATH_W) 'test/CppTest/suite.cpp'; else $(CYGPATH_W) '$(srcdir)/test/CppTest/suite.cpp'; fi`
-
-test/CppTest/test_uriparser_test-textoutput.o: test/CppTest/textoutput.cpp
-@am__fastdepCXX_TRUE@	$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(test_uriparser_test_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT test/CppTest/test_uriparser_test-textoutput.o -MD -MP -MF test/CppTest/$(DEPDIR)/test_uriparser_test-textoutput.Tpo -c -o test/CppTest/test_uriparser_test-textoutput.o `test -f 'test/CppTest/textoutput.cpp' || echo '$(srcdir)/'`test/CppTest/textoutput.cpp
-@am__fastdepCXX_TRUE@	mv -f test/CppTest/$(DEPDIR)/test_uriparser_test-textoutput.Tpo test/CppTest/$(DEPDIR)/test_uriparser_test-textoutput.Po
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@	source='test/CppTest/textoutput.cpp' object='test/CppTest/test_uriparser_test-textoutput.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCXX_FALSE@	$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(test_uriparser_test_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o test/CppTest/test_uriparser_test-textoutput.o `test -f 'test/CppTest/textoutput.cpp' || echo '$(srcdir)/'`test/CppTest/textoutput.cpp
-
-test/CppTest/test_uriparser_test-textoutput.obj: test/CppTest/textoutput.cpp
-@am__fastdepCXX_TRUE@	$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(test_uriparser_test_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT test/CppTest/test_uriparser_test-textoutput.obj -MD -MP -MF test/CppTest/$(DEPDIR)/test_uriparser_test-textoutput.Tpo -c -o test/CppTest/test_uriparser_test-textoutput.obj `if test -f 'test/CppTest/textoutput.cpp'; then $(CYGPATH_W) 'test/CppTest/textoutput.cpp'; else $(CYGPATH_W) '$(srcdir)/test/CppTest/textoutput.cpp'; fi`
-@am__fastdepCXX_TRUE@	mv -f test/CppTest/$(DEPDIR)/test_uriparser_test-textoutput.Tpo test/CppTest/$(DEPDIR)/test_uriparser_test-textoutput.Po
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@	source='test/CppTest/textoutput.cpp' object='test/CppTest/test_uriparser_test-textoutput.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCXX_FALSE@	$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(test_uriparser_test_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o test/CppTest/test_uriparser_test-textoutput.obj `if test -f 'test/CppTest/textoutput.cpp'; then $(CYGPATH_W) 'test/CppTest/textoutput.cpp'; else $(CYGPATH_W) '$(srcdir)/test/CppTest/textoutput.cpp'; fi`
-
-test/CppTest/test_uriparser_test-time.o: test/CppTest/time.cpp
-@am__fastdepCXX_TRUE@	$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(test_uriparser_test_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT test/CppTest/test_uriparser_test-time.o -MD -MP -MF test/CppTest/$(DEPDIR)/test_uriparser_test-time.Tpo -c -o test/CppTest/test_uriparser_test-time.o `test -f 'test/CppTest/time.cpp' || echo '$(srcdir)/'`test/CppTest/time.cpp
-@am__fastdepCXX_TRUE@	mv -f test/CppTest/$(DEPDIR)/test_uriparser_test-time.Tpo test/CppTest/$(DEPDIR)/test_uriparser_test-time.Po
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@	source='test/CppTest/time.cpp' object='test/CppTest/test_uriparser_test-time.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCXX_FALSE@	$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(test_uriparser_test_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o test/CppTest/test_uriparser_test-time.o `test -f 'test/CppTest/time.cpp' || echo '$(srcdir)/'`test/CppTest/time.cpp
-
-test/CppTest/test_uriparser_test-time.obj: test/CppTest/time.cpp
-@am__fastdepCXX_TRUE@	$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(test_uriparser_test_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT test/CppTest/test_uriparser_test-time.obj -MD -MP -MF test/CppTest/$(DEPDIR)/test_uriparser_test-time.Tpo -c -o test/CppTest/test_uriparser_test-time.obj `if test -f 'test/CppTest/time.cpp'; then $(CYGPATH_W) 'test/CppTest/time.cpp'; else $(CYGPATH_W) '$(srcdir)/test/CppTest/time.cpp'; fi`
-@am__fastdepCXX_TRUE@	mv -f test/CppTest/$(DEPDIR)/test_uriparser_test-time.Tpo test/CppTest/$(DEPDIR)/test_uriparser_test-time.Po
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@	source='test/CppTest/time.cpp' object='test/CppTest/test_uriparser_test-time.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCXX_FALSE@	$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(test_uriparser_test_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o test/CppTest/test_uriparser_test-time.obj `if test -f 'test/CppTest/time.cpp'; then $(CYGPATH_W) 'test/CppTest/time.cpp'; else $(CYGPATH_W) '$(srcdir)/test/CppTest/time.cpp'; fi`
-
-test/CppTest/test_uriparser_test-utils.o: test/CppTest/utils.cpp
-@am__fastdepCXX_TRUE@	$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(test_uriparser_test_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT test/CppTest/test_uriparser_test-utils.o -MD -MP -MF test/CppTest/$(DEPDIR)/test_uriparser_test-utils.Tpo -c -o test/CppTest/test_uriparser_test-utils.o `test -f 'test/CppTest/utils.cpp' || echo '$(srcdir)/'`test/CppTest/utils.cpp
-@am__fastdepCXX_TRUE@	mv -f test/CppTest/$(DEPDIR)/test_uriparser_test-utils.Tpo test/CppTest/$(DEPDIR)/test_uriparser_test-utils.Po
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@	source='test/CppTest/utils.cpp' object='test/CppTest/test_uriparser_test-utils.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCXX_FALSE@	$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(test_uriparser_test_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o test/CppTest/test_uriparser_test-utils.o `test -f 'test/CppTest/utils.cpp' || echo '$(srcdir)/'`test/CppTest/utils.cpp
-
-test/CppTest/test_uriparser_test-utils.obj: test/CppTest/utils.cpp
-@am__fastdepCXX_TRUE@	$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(test_uriparser_test_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT test/CppTest/test_uriparser_test-utils.obj -MD -MP -MF test/CppTest/$(DEPDIR)/test_uriparser_test-utils.Tpo -c -o test/CppTest/test_uriparser_test-utils.obj `if test -f 'test/CppTest/utils.cpp'; then $(CYGPATH_W) 'test/CppTest/utils.cpp'; else $(CYGPATH_W) '$(srcdir)/test/CppTest/utils.cpp'; fi`
-@am__fastdepCXX_TRUE@	mv -f test/CppTest/$(DEPDIR)/test_uriparser_test-utils.Tpo test/CppTest/$(DEPDIR)/test_uriparser_test-utils.Po
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@	source='test/CppTest/utils.cpp' object='test/CppTest/test_uriparser_test-utils.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCXX_FALSE@	$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(test_uriparser_test_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o test/CppTest/test_uriparser_test-utils.obj `if test -f 'test/CppTest/utils.cpp'; then $(CYGPATH_W) 'test/CppTest/utils.cpp'; else $(CYGPATH_W) '$(srcdir)/test/CppTest/utils.cpp'; fi`
-
-test/test_uriparser_test-FourSuite.o: test/FourSuite.cpp
-@am__fastdepCXX_TRUE@	$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(test_uriparser_test_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT test/test_uriparser_test-FourSuite.o -MD -MP -MF test/$(DEPDIR)/test_uriparser_test-FourSuite.Tpo -c -o test/test_uriparser_test-FourSuite.o `test -f 'test/FourSuite.cpp' || echo '$(srcdir)/'`test/FourSuite.cpp
-@am__fastdepCXX_TRUE@	mv -f test/$(DEPDIR)/test_uriparser_test-FourSuite.Tpo test/$(DEPDIR)/test_uriparser_test-FourSuite.Po
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@	source='test/FourSuite.cpp' object='test/test_uriparser_test-FourSuite.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCXX_FALSE@	$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(test_uriparser_test_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o test/test_uriparser_test-FourSuite.o `test -f 'test/FourSuite.cpp' || echo '$(srcdir)/'`test/FourSuite.cpp
-
-test/test_uriparser_test-FourSuite.obj: test/FourSuite.cpp
-@am__fastdepCXX_TRUE@	$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(test_uriparser_test_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT test/test_uriparser_test-FourSuite.obj -MD -MP -MF test/$(DEPDIR)/test_uriparser_test-FourSuite.Tpo -c -o test/test_uriparser_test-FourSuite.obj `if test -f 'test/FourSuite.cpp'; then $(CYGPATH_W) 'test/FourSuite.cpp'; else $(CYGPATH_W) '$(srcdir)/test/FourSuite.cpp'; fi`
-@am__fastdepCXX_TRUE@	mv -f test/$(DEPDIR)/test_uriparser_test-FourSuite.Tpo test/$(DEPDIR)/test_uriparser_test-FourSuite.Po
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@	source='test/FourSuite.cpp' object='test/test_uriparser_test-FourSuite.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCXX_FALSE@	$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(test_uriparser_test_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o test/test_uriparser_test-FourSuite.obj `if test -f 'test/FourSuite.cpp'; then $(CYGPATH_W) 'test/FourSuite.cpp'; else $(CYGPATH_W) '$(srcdir)/test/FourSuite.cpp'; fi`
-
-test/test_uriparser_test-test.o: test/test.cpp
-@am__fastdepCXX_TRUE@	$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(test_uriparser_test_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT test/test_uriparser_test-test.o -MD -MP -MF test/$(DEPDIR)/test_uriparser_test-test.Tpo -c -o test/test_uriparser_test-test.o `test -f 'test/test.cpp' || echo '$(srcdir)/'`test/test.cpp
-@am__fastdepCXX_TRUE@	mv -f test/$(DEPDIR)/test_uriparser_test-test.Tpo test/$(DEPDIR)/test_uriparser_test-test.Po
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@	source='test/test.cpp' object='test/test_uriparser_test-test.o' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCXX_FALSE@	$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(test_uriparser_test_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o test/test_uriparser_test-test.o `test -f 'test/test.cpp' || echo '$(srcdir)/'`test/test.cpp
-
-test/test_uriparser_test-test.obj: test/test.cpp
-@am__fastdepCXX_TRUE@	$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(test_uriparser_test_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -MT test/test_uriparser_test-test.obj -MD -MP -MF test/$(DEPDIR)/test_uriparser_test-test.Tpo -c -o test/test_uriparser_test-test.obj `if test -f 'test/test.cpp'; then $(CYGPATH_W) 'test/test.cpp'; else $(CYGPATH_W) '$(srcdir)/test/test.cpp'; fi`
-@am__fastdepCXX_TRUE@	mv -f test/$(DEPDIR)/test_uriparser_test-test.Tpo test/$(DEPDIR)/test_uriparser_test-test.Po
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@	source='test/test.cpp' object='test/test_uriparser_test-test.obj' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCXX_FALSE@	$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(test_uriparser_test_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS) -c -o test/test_uriparser_test-test.obj `if test -f 'test/test.cpp'; then $(CYGPATH_W) 'test/test.cpp'; else $(CYGPATH_W) '$(srcdir)/test/test.cpp'; fi`
-
 mostlyclean-libtool:
 	-rm -f *.lo
 
 clean-libtool:
 	-rm -rf .libs _libs
 	-rm -rf lib/.libs lib/_libs
+	-rm -rf test/.libs test/_libs
 
 distclean-libtool:
 	-rm -f libtool
-install-include_uriparserHEADERS: $(include_uriparser_HEADERS)
+install-pkgincludeHEADERS: $(pkginclude_HEADERS)
 	@$(NORMAL_INSTALL)
-	test -z "$(include_uriparserdir)" || $(MKDIR_P) "$(DESTDIR)$(include_uriparserdir)"
-	@list='$(include_uriparser_HEADERS)'; for p in $$list; do \
+	test -z "$(pkgincludedir)" || $(MKDIR_P) "$(DESTDIR)$(pkgincludedir)"
+	@list='$(pkginclude_HEADERS)'; for p in $$list; do \
 	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
 	  f=$(am__strip_dir) \
-	  echo " $(include_uriparserHEADERS_INSTALL) '$$d$$p' '$(DESTDIR)$(include_uriparserdir)/$$f'"; \
-	  $(include_uriparserHEADERS_INSTALL) "$$d$$p" "$(DESTDIR)$(include_uriparserdir)/$$f"; \
+	  echo " $(pkgincludeHEADERS_INSTALL) '$$d$$p' '$(DESTDIR)$(pkgincludedir)/$$f'"; \
+	  $(pkgincludeHEADERS_INSTALL) "$$d$$p" "$(DESTDIR)$(pkgincludedir)/$$f"; \
 	done
 
-uninstall-include_uriparserHEADERS:
+uninstall-pkgincludeHEADERS:
 	@$(NORMAL_UNINSTALL)
-	@list='$(include_uriparser_HEADERS)'; for p in $$list; do \
+	@list='$(pkginclude_HEADERS)'; for p in $$list; do \
 	  f=$(am__strip_dir) \
-	  echo " rm -f '$(DESTDIR)$(include_uriparserdir)/$$f'"; \
-	  rm -f "$(DESTDIR)$(include_uriparserdir)/$$f"; \
+	  echo " rm -f '$(DESTDIR)$(pkgincludedir)/$$f'"; \
+	  rm -f "$(DESTDIR)$(pkgincludedir)/$$f"; \
+	done
+
+# This directory's subdirectories are mostly independent; you can cd
+# into them and run `make' without going through this Makefile.
+# To change the values of `make' variables: instead of editing Makefiles,
+# (1) if the variable is set in `config.status', edit `config.status'
+#     (which will cause the Makefiles to be regenerated when you run `make');
+# (2) otherwise, pass the desired values on the `make' command line.
+$(RECURSIVE_TARGETS):
+	@failcom='exit 1'; \
+	for f in x $$MAKEFLAGS; do \
+	  case $$f in \
+	    *=* | --[!k]*);; \
+	    *k*) failcom='fail=yes';; \
+	  esac; \
+	done; \
+	dot_seen=no; \
+	target=`echo $@ | sed s/-recursive//`; \
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  echo "Making $$target in $$subdir"; \
+	  if test "$$subdir" = "."; then \
+	    dot_seen=yes; \
+	    local_target="$$target-am"; \
+	  else \
+	    local_target="$$target"; \
+	  fi; \
+	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+	  || eval $$failcom; \
+	done; \
+	if test "$$dot_seen" = "no"; then \
+	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
+	fi; test -z "$$fail"
+
+$(RECURSIVE_CLEAN_TARGETS):
+	@failcom='exit 1'; \
+	for f in x $$MAKEFLAGS; do \
+	  case $$f in \
+	    *=* | --[!k]*);; \
+	    *k*) failcom='fail=yes';; \
+	  esac; \
+	done; \
+	dot_seen=no; \
+	case "$@" in \
+	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
+	  *) list='$(SUBDIRS)' ;; \
+	esac; \
+	rev=''; for subdir in $$list; do \
+	  if test "$$subdir" = "."; then :; else \
+	    rev="$$subdir $$rev"; \
+	  fi; \
+	done; \
+	rev="$$rev ."; \
+	target=`echo $@ | sed s/-recursive//`; \
+	for subdir in $$rev; do \
+	  echo "Making $$target in $$subdir"; \
+	  if test "$$subdir" = "."; then \
+	    local_target="$$target-am"; \
+	  else \
+	    local_target="$$target"; \
+	  fi; \
+	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+	  || eval $$failcom; \
+	done && test -z "$$fail"
+tags-recursive:
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
+	done
+ctags-recursive:
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
 	done
 
 ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
@@ -886,37 +700,49 @@
 	unique=`for i in $$list; do \
 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 	  done | \
-	  $(AWK) '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
+	  $(AWK) '{ files[$$0] = 1; nonemtpy = 1; } \
+	      END { if (nonempty) { for (i in files) print i; }; }'`; \
 	mkid -fID $$unique
 tags: TAGS
 
-TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
+TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
 	tags=; \
 	here=`pwd`; \
+	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
+	  include_option=--etags-include; \
+	  empty_fix=.; \
+	else \
+	  include_option=--include; \
+	  empty_fix=; \
+	fi; \
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  if test "$$subdir" = .; then :; else \
+	    test ! -f $$subdir/TAGS || \
+	      tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
+	  fi; \
+	done; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 	  done | \
-	  $(AWK) '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
+	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+	      END { if (nonempty) { for (i in files) print i; }; }'`; \
 	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
 	  test -n "$$unique" || unique=$$empty_fix; \
 	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
 	    $$tags $$unique; \
 	fi
 ctags: CTAGS
-CTAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
+CTAGS: ctags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
 		$(TAGS_FILES) $(LISP)
 	tags=; \
-	here=`pwd`; \
 	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
 	unique=`for i in $$list; do \
 	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 	  done | \
-	  $(AWK) '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
+	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+	      END { if (nonempty) { for (i in files) print i; }; }'`; \
 	test -z "$(CTAGS_ARGS)$$tags$$unique" \
 	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
 	     $$tags $$unique
@@ -1030,6 +856,23 @@
 	    || exit 1; \
 	  fi; \
 	done
+	list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+	  if test "$$subdir" = .; then :; else \
+	    test -d "$(distdir)/$$subdir" \
+	    || $(MKDIR_P) "$(distdir)/$$subdir" \
+	    || exit 1; \
+	    distdir=`$(am__cd) $(distdir) && pwd`; \
+	    top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
+	    (cd $$subdir && \
+	      $(MAKE) $(AM_MAKEFLAGS) \
+	        top_distdir="$$top_distdir" \
+	        distdir="$$distdir/$$subdir" \
+		am__remove_distdir=: \
+		am__skip_length_check=: \
+	        distdir) \
+	      || exit 1; \
+	  fi; \
+	done
 	-find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \
 	  ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
 	  ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
@@ -1041,6 +884,9 @@
 dist-bzip2: distdir
 	tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2
 	$(am__remove_distdir)
+dist-lzma: distdir
+	tardir=$(distdir) && $(am__tar) | lzma -9 -c >$(distdir).tar.lzma
+	$(am__remove_distdir)
 
 dist-tarZ: distdir
 	tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
@@ -1057,6 +903,7 @@
 dist dist-all: distdir
 	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
 	tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2
+	tardir=$(distdir) && $(am__tar) | lzma -9 -c >$(distdir).tar.lzma
 	-rm -f $(distdir).zip
 	zip -rq $(distdir).zip $(distdir)
 	$(am__remove_distdir)
@@ -1070,6 +917,8 @@
 	  GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(am__untar) ;;\
 	*.tar.bz2*) \
 	  bunzip2 -c $(distdir).tar.bz2 | $(am__untar) ;;\
+	*.tar.lzma*) \
+	  unlzma -c $(distdir).tar.lzma | $(am__untar) ;;\
 	*.tar.Z*) \
 	  uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
 	*.shar.gz*) \
@@ -1131,21 +980,22 @@
 check-am: all-am
 	$(MAKE) $(AM_MAKEFLAGS) $(check_PROGRAMS)
 	$(MAKE) $(AM_MAKEFLAGS) check-TESTS
-check: check-am
+check: check-recursive
 all-am: Makefile $(LTLIBRARIES) $(HEADERS)
-installdirs:
-	for dir in "$(DESTDIR)$(libdir)" "$(DESTDIR)$(include_uriparserdir)"; do \
+installdirs: installdirs-recursive
+installdirs-am:
+	for dir in "$(DESTDIR)$(libdir)" "$(DESTDIR)$(pkgincludedir)"; do \
 	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
 	done
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
+install: install-recursive
+install-exec: install-exec-recursive
+install-data: install-data-recursive
+uninstall: uninstall-recursive
 
 install-am: all-am
 	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
 
-installcheck: installcheck-am
+installcheck: installcheck-recursive
 install-strip:
 	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
 	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
@@ -1167,88 +1017,90 @@
 maintainer-clean-generic:
 	@echo "This command is intended for maintainers to use"
 	@echo "it deletes files that may require special tools to rebuild."
-clean: clean-am
+clean: clean-recursive
 
 clean-am: clean-checkPROGRAMS clean-generic clean-libLTLIBRARIES \
 	clean-libtool mostlyclean-am
 
-distclean: distclean-am
+distclean: distclean-recursive
 	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
 	-rm -rf lib/$(DEPDIR) test/$(DEPDIR) test/CppTest/$(DEPDIR)
 	-rm -f Makefile
 distclean-am: clean-am distclean-compile distclean-generic \
 	distclean-hdr distclean-libtool distclean-tags
 
-dvi: dvi-am
+dvi: dvi-recursive
 
 dvi-am:
 
-html: html-am
+html: html-recursive
 
-info: info-am
+info: info-recursive
 
 info-am:
 
-install-data-am: install-include_uriparserHEADERS
+install-data-am: install-pkgincludeHEADERS
 
-install-dvi: install-dvi-am
+install-dvi: install-dvi-recursive
 
 install-exec-am: install-libLTLIBRARIES
 
-install-html: install-html-am
+install-html: install-html-recursive
 
-install-info: install-info-am
+install-info: install-info-recursive
 
 install-man:
 
-install-pdf: install-pdf-am
+install-pdf: install-pdf-recursive
 
-install-ps: install-ps-am
+install-ps: install-ps-recursive
 
 installcheck-am:
 
-maintainer-clean: maintainer-clean-am
+maintainer-clean: maintainer-clean-recursive
 	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
 	-rm -rf $(top_srcdir)/autom4te.cache
 	-rm -rf lib/$(DEPDIR) test/$(DEPDIR) test/CppTest/$(DEPDIR)
 	-rm -f Makefile
 maintainer-clean-am: distclean-am maintainer-clean-generic
 
-mostlyclean: mostlyclean-am
+mostlyclean: mostlyclean-recursive
 
 mostlyclean-am: mostlyclean-compile mostlyclean-generic \
 	mostlyclean-libtool
 
-pdf: pdf-am
+pdf: pdf-recursive
 
 pdf-am:
 
-ps: ps-am
+ps: ps-recursive
 
 ps-am:
 
-uninstall-am: uninstall-include_uriparserHEADERS \
-	uninstall-libLTLIBRARIES
+uninstall-am: uninstall-libLTLIBRARIES uninstall-pkgincludeHEADERS
 
-.MAKE: install-am install-strip
+.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) install-am \
+	install-strip
 
-.PHONY: CTAGS GTAGS all all-am am--refresh check check-TESTS check-am \
-	clean clean-checkPROGRAMS clean-generic clean-libLTLIBRARIES \
-	clean-libtool ctags dist dist-all dist-bzip2 dist-gzip \
-	dist-shar dist-tarZ dist-zip distcheck distclean \
-	distclean-compile distclean-generic distclean-hdr \
+.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
+	all all-am am--refresh check check-TESTS check-am clean \
+	clean-checkPROGRAMS clean-generic clean-libLTLIBRARIES \
+	clean-libtool ctags ctags-recursive dist dist-all dist-bzip2 \
+	dist-gzip dist-lzma dist-shar dist-tarZ dist-zip distcheck \
+	distclean distclean-compile distclean-generic distclean-hdr \
 	distclean-libtool distclean-tags distcleancheck distdir \
 	distuninstallcheck dvi dvi-am html html-am info info-am \
 	install install-am install-data install-data-am install-dvi \
 	install-dvi-am install-exec install-exec-am install-html \
-	install-html-am install-include_uriparserHEADERS install-info \
-	install-info-am install-libLTLIBRARIES install-man install-pdf \
-	install-pdf-am install-ps install-ps-am install-strip \
-	installcheck installcheck-am installdirs maintainer-clean \
-	maintainer-clean-generic mostlyclean mostlyclean-compile \
-	mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
-	tags uninstall uninstall-am uninstall-include_uriparserHEADERS \
-	uninstall-libLTLIBRARIES
+	install-html-am install-info install-info-am \
+	install-libLTLIBRARIES install-man install-pdf install-pdf-am \
+	install-pkgincludeHEADERS install-ps install-ps-am \
+	install-strip installcheck installcheck-am installdirs \
+	installdirs-am maintainer-clean maintainer-clean-generic \
+	mostlyclean mostlyclean-compile mostlyclean-generic \
+	mostlyclean-libtool pdf pdf-am ps ps-am tags tags-recursive \
+	uninstall uninstall-am uninstall-libLTLIBRARIES \
+	uninstall-pkgincludeHEADERS
 
 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 # Otherwise a system limit (for SysV at least) may be exceeded.
diff -Nru /tmp/bxdedfLB6u/uriparser-0.6.0/missing /tmp/fLjZ2dz9P3/uriparser-0.7.4/missing
--- uriparser-0.6.0/missing	2007-07-06 00:26:55.000000000 +0100
+++ uriparser-0.7.4/missing	1970-01-01 01:00:00.000000000 +0100
@@ -1,367 +0,0 @@
-#! /bin/sh
-# Common stub for a few missing GNU programs while installing.
-
-scriptversion=2006-05-10.23
-
-# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005, 2006
-#   Free Software Foundation, Inc.
-# Originally by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
-# 02110-1301, USA.
-
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-if test $# -eq 0; then
-  echo 1>&2 "Try \`$0 --help' for more information"
-  exit 1
-fi
-
-run=:
-sed_output='s/.* --output[ =]\([^ ]*\).*/\1/p'
-sed_minuso='s/.* -o \([^ ]*\).*/\1/p'
-
-# In the cases where this matters, `missing' is being run in the
-# srcdir already.
-if test -f configure.ac; then
-  configure_ac=configure.ac
-else
-  configure_ac=configure.in
-fi
-
-msg="missing on your system"
-
-case $1 in
---run)
-  # Try to run requested program, and just exit if it succeeds.
-  run=
-  shift
-  "$@" && exit 0
-  # Exit code 63 means version mismatch.  This often happens
-  # when the user try to use an ancient version of a tool on
-  # a file that requires a minimum version.  In this case we
-  # we should proceed has if the program had been absent, or
-  # if --run hadn't been passed.
-  if test $? = 63; then
-    run=:
-    msg="probably too old"
-  fi
-  ;;
-
-  -h|--h|--he|--hel|--help)
-    echo "\
-$0 [OPTION]... PROGRAM [ARGUMENT]...
-
-Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an
-error status if there is no known handling for PROGRAM.
-
-Options:
-  -h, --help      display this help and exit
-  -v, --version   output version information and exit
-  --run           try to run the given command, and emulate it if it fails
-
-Supported PROGRAM values:
-  aclocal      touch file \`aclocal.m4'
-  autoconf     touch file \`configure'
-  autoheader   touch file \`config.h.in'
-  autom4te     touch the output file, or create a stub one
-  automake     touch all \`Makefile.in' files
-  bison        create \`y.tab.[ch]', if possible, from existing .[ch]
-  flex         create \`lex.yy.c', if possible, from existing .c
-  help2man     touch the output file
-  lex          create \`lex.yy.c', if possible, from existing .c
-  makeinfo     touch the output file
-  tar          try tar, gnutar, gtar, then tar without non-portable flags
-  yacc         create \`y.tab.[ch]', if possible, from existing .[ch]
-
-Send bug reports to <bug-automake@gnu.org>."
-    exit $?
-    ;;
-
-  -v|--v|--ve|--ver|--vers|--versi|--versio|--version)
-    echo "missing $scriptversion (GNU Automake)"
-    exit $?
-    ;;
-
-  -*)
-    echo 1>&2 "$0: Unknown \`$1' option"
-    echo 1>&2 "Try \`$0 --help' for more information"
-    exit 1
-    ;;
-
-esac
-
-# Now exit if we have it, but it failed.  Also exit now if we
-# don't have it and --version was passed (most likely to detect
-# the program).
-case $1 in
-  lex|yacc)
-    # Not GNU programs, they don't have --version.
-    ;;
-
-  tar)
-    if test -n "$run"; then
-       echo 1>&2 "ERROR: \`tar' requires --run"
-       exit 1
-    elif test "x$2" = "x--version" || test "x$2" = "x--help"; then
-       exit 1
-    fi
-    ;;
-
-  *)
-    if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
-       # We have it, but it failed.
-       exit 1
-    elif test "x$2" = "x--version" || test "x$2" = "x--help"; then
-       # Could not run --version or --help.  This is probably someone
-       # running `$TOOL --version' or `$TOOL --help' to check whether
-       # $TOOL exists and not knowing $TOOL uses missing.
-       exit 1
-    fi
-    ;;
-esac
-
-# If it does not exist, or fails to run (possibly an outdated version),
-# try to emulate it.
-case $1 in
-  aclocal*)
-    echo 1>&2 "\
-WARNING: \`$1' is $msg.  You should only need it if
-         you modified \`acinclude.m4' or \`${configure_ac}'.  You might want
-         to install the \`Automake' and \`Perl' packages.  Grab them from
-         any GNU archive site."
-    touch aclocal.m4
-    ;;
-
-  autoconf)
-    echo 1>&2 "\
-WARNING: \`$1' is $msg.  You should only need it if
-         you modified \`${configure_ac}'.  You might want to install the
-         \`Autoconf' and \`GNU m4' packages.  Grab them from any GNU
-         archive site."
-    touch configure
-    ;;
-
-  autoheader)
-    echo 1>&2 "\
-WARNING: \`$1' is $msg.  You should only need it if
-         you modified \`acconfig.h' or \`${configure_ac}'.  You might want
-         to install the \`Autoconf' and \`GNU m4' packages.  Grab them
-         from any GNU archive site."
-    files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' ${configure_ac}`
-    test -z "$files" && files="config.h"
-    touch_files=
-    for f in $files; do
-      case $f in
-      *:*) touch_files="$touch_files "`echo "$f" |
-				       sed -e 's/^[^:]*://' -e 's/:.*//'`;;
-      *) touch_files="$touch_files $f.in";;
-      esac
-    done
-    touch $touch_files
-    ;;
-
-  automake*)
-    echo 1>&2 "\
-WARNING: \`$1' is $msg.  You should only need it if
-         you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'.
-         You might want to install the \`Automake' and \`Perl' packages.
-         Grab them from any GNU archive site."
-    find . -type f -name Makefile.am -print |
-	   sed 's/\.am$/.in/' |
-	   while read f; do touch "$f"; done
-    ;;
-
-  autom4te)
-    echo 1>&2 "\
-WARNING: \`$1' is needed, but is $msg.
-         You might have modified some files without having the
-         proper tools for further handling them.
-         You can get \`$1' as part of \`Autoconf' from any GNU
-         archive site."
-
-    file=`echo "$*" | sed -n "$sed_output"`
-    test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
-    if test -f "$file"; then
-	touch $file
-    else
-	test -z "$file" || exec >$file
-	echo "#! /bin/sh"
-	echo "# Created by GNU Automake missing as a replacement of"
-	echo "#  $ $@"
-	echo "exit 0"
-	chmod +x $file
-	exit 1
-    fi
-    ;;
-
-  bison|yacc)
-    echo 1>&2 "\
-WARNING: \`$1' $msg.  You should only need it if
-         you modified a \`.y' file.  You may need the \`Bison' package
-         in order for those modifications to take effect.  You can get
-         \`Bison' from any GNU archive site."
-    rm -f y.tab.c y.tab.h
-    if test $# -ne 1; then
-        eval LASTARG="\${$#}"
-	case $LASTARG in
-	*.y)
-	    SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'`
-	    if test -f "$SRCFILE"; then
-	         cp "$SRCFILE" y.tab.c
-	    fi
-	    SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'`
-	    if test -f "$SRCFILE"; then
-	         cp "$SRCFILE" y.tab.h
-	    fi
-	  ;;
-	esac
-    fi
-    if test ! -f y.tab.h; then
-	echo >y.tab.h
-    fi
-    if test ! -f y.tab.c; then
-	echo 'main() { return 0; }' >y.tab.c
-    fi
-    ;;
-
-  lex|flex)
-    echo 1>&2 "\
-WARNING: \`$1' is $msg.  You should only need it if
-         you modified a \`.l' file.  You may need the \`Flex' package
-         in order for those modifications to take effect.  You can get
-         \`Flex' from any GNU archive site."
-    rm -f lex.yy.c
-    if test $# -ne 1; then
-        eval LASTARG="\${$#}"
-	case $LASTARG in
-	*.l)
-	    SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'`
-	    if test -f "$SRCFILE"; then
-	         cp "$SRCFILE" lex.yy.c
-	    fi
-	  ;;
-	esac
-    fi
-    if test ! -f lex.yy.c; then
-	echo 'main() { return 0; }' >lex.yy.c
-    fi
-    ;;
-
-  help2man)
-    echo 1>&2 "\
-WARNING: \`$1' is $msg.  You should only need it if
-	 you modified a dependency of a manual page.  You may need the
-	 \`Help2man' package in order for those modifications to take
-	 effect.  You can get \`Help2man' from any GNU archive site."
-
-    file=`echo "$*" | sed -n "$sed_output"`
-    test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
-    if test -f "$file"; then
-	touch $file
-    else
-	test -z "$file" || exec >$file
-	echo ".ab help2man is required to generate this page"
-	exit 1
-    fi
-    ;;
-
-  makeinfo)
-    echo 1>&2 "\
-WARNING: \`$1' is $msg.  You should only need it if
-         you modified a \`.texi' or \`.texinfo' file, or any other file
-         indirectly affecting the aspect of the manual.  The spurious
-         call might also be the consequence of using a buggy \`make' (AIX,
-         DU, IRIX).  You might want to install the \`Texinfo' package or
-         the \`GNU make' package.  Grab either from any GNU archive site."
-    # The file to touch is that specified with -o ...
-    file=`echo "$*" | sed -n "$sed_output"`
-    test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
-    if test -z "$file"; then
-      # ... or it is the one specified with @setfilename ...
-      infile=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'`
-      file=`sed -n '
-	/^@setfilename/{
-	  s/.* \([^ ]*\) *$/\1/
-	  p
-	  q
-	}' $infile`
-      # ... or it is derived from the source name (dir/f.texi becomes f.info)
-      test -z "$file" && file=`echo "$infile" | sed 's,.*/,,;s,.[^.]*$,,'`.info
-    fi
-    # If the file does not exist, the user really needs makeinfo;
-    # let's fail without touching anything.
-    test -f $file || exit 1
-    touch $file
-    ;;
-
-  tar)
-    shift
-
-    # We have already tried tar in the generic part.
-    # Look for gnutar/gtar before invocation to avoid ugly error
-    # messages.
-    if (gnutar --version > /dev/null 2>&1); then
-       gnutar "$@" && exit 0
-    fi
-    if (gtar --version > /dev/null 2>&1); then
-       gtar "$@" && exit 0
-    fi
-    firstarg="$1"
-    if shift; then
-	case $firstarg in
-	*o*)
-	    firstarg=`echo "$firstarg" | sed s/o//`
-	    tar "$firstarg" "$@" && exit 0
-	    ;;
-	esac
-	case $firstarg in
-	*h*)
-	    firstarg=`echo "$firstarg" | sed s/h//`
-	    tar "$firstarg" "$@" && exit 0
-	    ;;
-	esac
-    fi
-
-    echo 1>&2 "\
-WARNING: I can't seem to be able to run \`tar' with the given arguments.
-         You may want to install GNU tar or Free paxutils, or check the
-         command line arguments."
-    exit 1
-    ;;
-
-  *)
-    echo 1>&2 "\
-WARNING: \`$1' is needed, and is $msg.
-         You might have modified some files without having the
-         proper tools for further handling them.  Check the \`README' file,
-         it often tells you about the needed prerequisites for installing
-         this package.  You may also peek at any GNU archive site, in case
-         some other package would contain this missing \`$1' program."
-    exit 1
-    ;;
-esac
-
-exit 0
-
-# Local variables:
-# eval: (add-hook 'write-file-hooks 'time-stamp)
-# time-stamp-start: "scriptversion="
-# time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-end: "$"
-# End:
diff -Nru /tmp/bxdedfLB6u/uriparser-0.6.0/test/CppTest/collectoroutput.cpp /tmp/fLjZ2dz9P3/uriparser-0.7.4/test/CppTest/collectoroutput.cpp
--- uriparser-0.6.0/test/CppTest/collectoroutput.cpp	2007-07-06 00:25:45.000000000 +0100
+++ uriparser-0.7.4/test/CppTest/collectoroutput.cpp	2008-12-20 18:52:46.000000000 +0000
@@ -1,6 +1,6 @@
 // ---
 //
-// $Id: collectoroutput.cpp,v 1.2 2004/02/04 21:08:23 nilu Exp $
+// $Id: collectoroutput.cpp,v 1.4 2008/07/15 20:33:31 hartwork Exp $
 //
 // CppTest - A C++ Unit Testing Framework
 // Copyright (c) 2003 Niklas Lundell
@@ -28,7 +28,8 @@
 # include "winconfig.h"
 #else
 # include "config.h"
-#endif
+#endif 
+
 #include "cpptest-collectoroutput.h"
 
 using namespace std;
diff -Nru /tmp/bxdedfLB6u/uriparser-0.6.0/test/CppTest/compileroutput.cpp /tmp/fLjZ2dz9P3/uriparser-0.7.4/test/CppTest/compileroutput.cpp
--- uriparser-0.6.0/test/CppTest/compileroutput.cpp	2007-07-06 00:25:45.000000000 +0100
+++ uriparser-0.7.4/test/CppTest/compileroutput.cpp	2008-12-20 18:52:46.000000000 +0000
@@ -1,6 +1,6 @@
 // ---
 //
-// $Id: compileroutput.cpp,v 1.2 2004/02/04 21:08:23 nilu Exp $
+// $Id: compileroutput.cpp,v 1.3 2005/06/08 08:08:06 nilu Exp $
 //
 // CppTest - A C++ Unit Testing Framework
 // Copyright (c) 2003 Niklas Lundell
diff -Nru /tmp/bxdedfLB6u/uriparser-0.6.0/test/CppTest/config.h.in /tmp/fLjZ2dz9P3/uriparser-0.7.4/test/CppTest/config.h.in
--- uriparser-0.6.0/test/CppTest/config.h.in	2007-09-19 04:14:23.000000000 +0100
+++ uriparser-0.7.4/test/CppTest/config.h.in	2008-12-23 02:31:18.000000000 +0000
@@ -1,4 +1,4 @@
-/* test/CppTest/config.h.in.  Generated from configure.in by autoheader.  */
+/* test/CppTest/config.h.in.  Generated from configure.ac by autoheader.  */
 
 /* Define to 1 if you have the <dlfcn.h> header file. */
 #undef HAVE_DLFCN_H
@@ -39,6 +39,9 @@
 /* Define to 1 if you have the <unistd.h> header file. */
 #undef HAVE_UNISTD_H
 
+/* Define if your CRT provides the wprintf function. */
+#undef HAVE_WPRINTF
+
 /* Name of package */
 #undef PACKAGE
 
diff -Nru /tmp/bxdedfLB6u/uriparser-0.6.0/test/CppTest/COPYING /tmp/fLjZ2dz9P3/uriparser-0.7.4/test/CppTest/COPYING
--- uriparser-0.6.0/test/CppTest/COPYING	2007-07-06 00:25:45.000000000 +0100
+++ uriparser-0.7.4/test/CppTest/COPYING	2008-12-20 18:52:46.000000000 +0000
@@ -1,504 +1,504 @@
-		  GNU LESSER GENERAL PUBLIC LICENSE
-		       Version 2.1, February 1999
-
- Copyright (C) 1991, 1999 Free Software Foundation, Inc.
-     59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- Everyone is permitted to copy and distribute verbatim copies
- of this license document, but changing it is not allowed.
-
-[This is the first released version of the Lesser GPL.  It also counts
- as the successor of the GNU Library Public License, version 2, hence
- the version number 2.1.]
-
-			    Preamble
-
-  The licenses for most software are designed to take away your
-freedom to share and change it.  By contrast, the GNU General Public
-Licenses are intended to guarantee your freedom to share and change
-free software--to make sure the software is free for all its users.
-
-  This license, the Lesser General Public License, applies to some
-specially designated software packages--typically libraries--of the
-Free Software Foundation and other authors who decide to use it.  You
-can use it too, but we suggest you first think carefully about whether
-this license or the ordinary General Public License is the better
-strategy to use in any particular case, based on the explanations below.
-
-  When we speak of free software, we are referring to freedom of use,
-not price.  Our General Public Licenses are designed to make sure that
-you have the freedom to distribute copies of free software (and charge
-for this service if you wish); that you receive source code or can get
-it if you want it; that you can change the software and use pieces of
-it in new free programs; and that you are informed that you can do
-these things.
-
-  To protect your rights, we need to make restrictions that forbid
-distributors to deny you these rights or to ask you to surrender these
-rights.  These restrictions translate to certain responsibilities for
-you if you distribute copies of the library or if you modify it.
-
-  For example, if you distribute copies of the library, whether gratis
-or for a fee, you must give the recipients all the rights that we gave
-you.  You must make sure that they, too, receive or can get the source
-code.  If you link other code with the library, you must provide
-complete object files to the recipients, so that they can relink them
-with the library after making changes to the library and recompiling
-it.  And you must show them these terms so they know their rights.
-
-  We protect your rights with a two-step method: (1) we copyright the
-library, and (2) we offer you this license, which gives you legal
-permission to copy, distribute and/or modify the library.
-
-  To protect each distributor, we want to make it very clear that
-there is no warranty for the free library.  Also, if the library is
-modified by someone else and passed on, the recipients should know
-that what they have is not the original version, so that the original
-author's reputation will not be affected by problems that might be
-introduced by others.
-
-  Finally, software patents pose a constant threat to the existence of
-any free program.  We wish to make sure that a company cannot
-effectively restrict the users of a free program by obtaining a
-restrictive license from a patent holder.  Therefore, we insist that
-any patent license obtained for a version of the library must be
-consistent with the full freedom of use specified in this license.
-
-  Most GNU software, including some libraries, is covered by the
-ordinary GNU General Public License.  This license, the GNU Lesser
-General Public License, applies to certain designated libraries, and
-is quite different from the ordinary General Public License.  We use
-this license for certain libraries in order to permit linking those
-libraries into non-free programs.
-
-  When a program is linked with a library, whether statically or using
-a shared library, the combination of the two is legally speaking a
-combined work, a derivative of the original library.  The ordinary
-General Public License therefore permits such linking only if the
-entire combination fits its criteria of freedom.  The Lesser General
-Public License permits more lax criteria for linking other code with
-the library.
-
-  We call this license the "Lesser" General Public License because it
-does Less to protect the user's freedom than the ordinary General
-Public License.  It also provides other free software developers Less
-of an advantage over competing non-free programs.  These disadvantages
-are the reason we use the ordinary General Public License for many
-libraries.  However, the Lesser license provides advantages in certain
-special circumstances.
-
-  For example, on rare occasions, there may be a special need to
-encourage the widest possible use of a certain library, so that it becomes
-a de-facto standard.  To achieve this, non-free programs must be
-allowed to use the library.  A more frequent case is that a free
-library does the same job as widely used non-free libraries.  In this
-case, there is little to gain by limiting the free library to free
-software only, so we use the Lesser General Public License.
-
-  In other cases, permission to use a particular library in non-free
-programs enables a greater number of people to use a large body of
-free software.  For example, permission to use the GNU C Library in
-non-free programs enables many more people to use the whole GNU
-operating system, as well as its variant, the GNU/Linux operating
-system.
-
-  Although the Lesser General Public License is Less protective of the
-users' freedom, it does ensure that the user of a program that is
-linked with the Library has the freedom and the wherewithal to run
-that program using a modified version of the Library.
-
-  The precise terms and conditions for copying, distribution and
-modification follow.  Pay close attention to the difference between a
-"work based on the library" and a "work that uses the library".  The
-former contains code derived from the library, whereas the latter must
-be combined with the library in order to run.
-
-		  GNU LESSER GENERAL PUBLIC LICENSE
-   TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
-
-  0. This License Agreement applies to any software library or other
-program which contains a notice placed by the copyright holder or
-other authorized party saying it may be distributed under the terms of
-this Lesser General Public License (also called "this License").
-Each licensee is addressed as "you".
-
-  A "library" means a collection of software functions and/or data
-prepared so as to be conveniently linked with application programs
-(which use some of those functions and data) to form executables.
-
-  The "Library", below, refers to any such software library or work
-which has been distributed under these terms.  A "work based on the
-Library" means either the Library or any derivative work under
-copyright law: that is to say, a work containing the Library or a
-portion of it, either verbatim or with modifications and/or translated
-straightforwardly into another language.  (Hereinafter, translation is
-included without limitation in the term "modification".)
-
-  "Source code" for a work means the preferred form of the work for
-making modifications to it.  For a library, complete source code means
-all the source code for all modules it contains, plus any associated
-interface definition files, plus the scripts used to control compilation
-and installation of the library.
-
-  Activities other than copying, distribution and modification are not
-covered by this License; they are outside its scope.  The act of
-running a program using the Library is not restricted, and output from
-such a program is covered only if its contents constitute a work based
-on the Library (independent of the use of the Library in a tool for
-writing it).  Whether that is true depends on what the Library does
-and what the program that uses the Library does.
-  
-  1. You may copy and distribute verbatim copies of the Library's
-complete source code as you receive it, in any medium, provided that
-you conspicuously and appropriately publish on each copy an
-appropriate copyright notice and disclaimer of warranty; keep intact
-all the notices that refer to this License and to the absence of any
-warranty; and distribute a copy of this License along with the
-Library.
-
-  You may charge a fee for the physical act of transferring a copy,
-and you may at your option offer warranty protection in exchange for a
-fee.
-
-  2. You may modify your copy or copies of the Library or any portion
-of it, thus forming a work based on the Library, and copy and
-distribute such modifications or work under the terms of Section 1
-above, provided that you also meet all of these conditions:
-
-    a) The modified work must itself be a software library.
-
-    b) You must cause the files modified to carry prominent notices
-    stating that you changed the files and the date of any change.
-
-    c) You must cause the whole of the work to be licensed at no
-    charge to all third parties under the terms of this License.
-
-    d) If a facility in the modified Library refers to a function or a
-    table of data to be supplied by an application program that uses
-    the facility, other than as an argument passed when the facility
-    is invoked, then you must make a good faith effort to ensure that,
-    in the event an application does not supply such function or
-    table, the facility still operates, and performs whatever part of
-    its purpose remains meaningful.
-
-    (For example, a function in a library to compute square roots has
-    a purpose that is entirely well-defined independent of the
-    application.  Therefore, Subsection 2d requires that any
-    application-supplied function or table used by this function must
-    be optional: if the application does not supply it, the square
-    root function must still compute square roots.)
-
-These requirements apply to the modified work as a whole.  If
-identifiable sections of that work are not derived from the Library,
-and can be reasonably considered independent and separate works in
-themselves, then this License, and its terms, do not apply to those
-sections when you distribute them as separate works.  But when you
-distribute the same sections as part of a whole which is a work based
-on the Library, the distribution of the whole must be on the terms of
-this License, whose permissions for other licensees extend to the
-entire whole, and thus to each and every part regardless of who wrote
-it.
-
-Thus, it is not the intent of this section to claim rights or contest
-your rights to work written entirely by you; rather, the intent is to
-exercise the right to control the distribution of derivative or
-collective works based on the Library.
-
-In addition, mere aggregation of another work not based on the Library
-with the Library (or with a work based on the Library) on a volume of
-a storage or distribution medium does not bring the other work under
-the scope of this License.
-
-  3. You may opt to apply the terms of the ordinary GNU General Public
-License instead of this License to a given copy of the Library.  To do
-this, you must alter all the notices that refer to this License, so
-that they refer to the ordinary GNU General Public License, version 2,
-instead of to this License.  (If a newer version than version 2 of the
-ordinary GNU General Public License has appeared, then you can specify
-that version instead if you wish.)  Do not make any other change in
-these notices.
-
-  Once this change is made in a given copy, it is irreversible for
-that copy, so the ordinary GNU General Public License applies to all
-subsequent copies and derivative works made from that copy.
-
-  This option is useful when you wish to copy part of the code of
-the Library into a program that is not a library.
-
-  4. You may copy and distribute the Library (or a portion or
-derivative of it, under Section 2) in object code or executable form
-under the terms of Sections 1 and 2 above provided that you accompany
-it with the complete corresponding machine-readable source code, which
-must be distributed under the terms of Sections 1 and 2 above on a
-medium customarily used for software interchange.
-
-  If distribution of object code is made by offering access to copy
-from a designated place, then offering equivalent access to copy the
-source code from the same place satisfies the requirement to
-distribute the source code, even though third parties are not
-compelled to copy the source along with the object code.
-
-  5. A program that contains no derivative of any portion of the
-Library, but is designed to work with the Library by being compiled or
-linked with it, is called a "work that uses the Library".  Such a
-work, in isolation, is not a derivative work of the Library, and
-therefore falls outside the scope of this License.
-
-  However, linking a "work that uses the Library" with the Library
-creates an executable that is a derivative of the Library (because it
-contains portions of the Library), rather than a "work that uses the
-library".  The executable is therefore covered by this License.
-Section 6 states terms for distribution of such executables.
-
-  When a "work that uses the Library" uses material from a header file
-that is part of the Library, the object code for the work may be a
-derivative work of the Library even though the source code is not.
-Whether this is true is especially significant if the work can be
-linked without the Library, or if the work is itself a library.  The
-threshold for this to be true is not precisely defined by law.
-
-  If such an object file uses only numerical parameters, data
-structure layouts and accessors, and small macros and small inline
-functions (ten lines or less in length), then the use of the object
-file is unrestricted, regardless of whether it is legally a derivative
-work.  (Executables containing this object code plus portions of the
-Library will still fall under Section 6.)
-
-  Otherwise, if the work is a derivative of the Library, you may
-distribute the object code for the work under the terms of Section 6.
-Any executables containing that work also fall under Section 6,
-whether or not they are linked directly with the Library itself.
-
-  6. As an exception to the Sections above, you may also combine or
-link a "work that uses the Library" with the Library to produce a
-work containing portions of the Library, and distribute that work
-under terms of your choice, provided that the terms permit
-modification of the work for the customer's own use and reverse
-engineering for debugging such modifications.
-
-  You must give prominent notice with each copy of the work that the
-Library is used in it and that the Library and its use are covered by
-this License.  You must supply a copy of this License.  If the work
-during execution displays copyright notices, you must include the
-copyright notice for the Library among them, as well as a reference
-directing the user to the copy of this License.  Also, you must do one
-of these things:
-
-    a) Accompany the work with the complete corresponding
-    machine-readable source code for the Library including whatever
-    changes were used in the work (which must be distributed under
-    Sections 1 and 2 above); and, if the work is an executable linked
-    with the Library, with the complete machine-readable "work that
-    uses the Library", as object code and/or source code, so that the
-    user can modify the Library and then relink to produce a modified
-    executable containing the modified Library.  (It is understood
-    that the user who changes the contents of definitions files in the
-    Library will not necessarily be able to recompile the application
-    to use the modified definitions.)
-
-    b) Use a suitable shared library mechanism for linking with the
-    Library.  A suitable mechanism is one that (1) uses at run time a
-    copy of the library already present on the user's computer system,
-    rather than copying library functions into the executable, and (2)
-    will operate properly with a modified version of the library, if
-    the user installs one, as long as the modified version is
-    interface-compatible with the version that the work was made with.
-
-    c) Accompany the work with a written offer, valid for at
-    least three years, to give the same user the materials
-    specified in Subsection 6a, above, for a charge no more
-    than the cost of performing this distribution.
-
-    d) If distribution of the work is made by offering access to copy
-    from a designated place, offer equivalent access to copy the above
-    specified materials from the same place.
-
-    e) Verify that the user has already received a copy of these
-    materials or that you have already sent this user a copy.
-
-  For an executable, the required form of the "work that uses the
-Library" must include any data and utility programs needed for
-reproducing the executable from it.  However, as a special exception,
-the materials to be distributed need not include anything that is
-normally distributed (in either source or binary form) with the major
-components (compiler, kernel, and so on) of the operating system on
-which the executable runs, unless that component itself accompanies
-the executable.
-
-  It may happen that this requirement contradicts the license
-restrictions of other proprietary libraries that do not normally
-accompany the operating system.  Such a contradiction means you cannot
-use both them and the Library together in an executable that you
-distribute.
-
-  7. You may place library facilities that are a work based on the
-Library side-by-side in a single library together with other library
-facilities not covered by this License, and distribute such a combined
-library, provided that the separate distribution of the work based on
-the Library and of the other library facilities is otherwise
-permitted, and provided that you do these two things:
-
-    a) Accompany the combined library with a copy of the same work
-    based on the Library, uncombined with any other library
-    facilities.  This must be distributed under the terms of the
-    Sections above.
-
-    b) Give prominent notice with the combined library of the fact
-    that part of it is a work based on the Library, and explaining
-    where to find the accompanying uncombined form of the same work.
-
-  8. You may not copy, modify, sublicense, link with, or distribute
-the Library except as expressly provided under this License.  Any
-attempt otherwise to copy, modify, sublicense, link with, or
-distribute the Library is void, and will automatically terminate your
-rights under this License.  However, parties who have received copies,
-or rights, from you under this License will not have their licenses
-terminated so long as such parties remain in full compliance.
-
-  9. You are not required to accept this License, since you have not
-signed it.  However, nothing else grants you permission to modify or
-distribute the Library or its derivative works.  These actions are
-prohibited by law if you do not accept this License.  Therefore, by
-modifying or distributing the Library (or any work based on the
-Library), you indicate your acceptance of this License to do so, and
-all its terms and conditions for copying, distributing or modifying
-the Library or works based on it.
-
-  10. Each time you redistribute the Library (or any work based on the
-Library), the recipient automatically receives a license from the
-original licensor to copy, distribute, link with or modify the Library
-subject to these terms and conditions.  You may not impose any further
-restrictions on the recipients' exercise of the rights granted herein.
-You are not responsible for enforcing compliance by third parties with
-this License.
-
-  11. If, as a consequence of a court judgment or allegation of patent
-infringement or for any other reason (not limited to patent issues),
-conditions are imposed on you (whether by court order, agreement or
-otherwise) that contradict the conditions of this License, they do not
-excuse you from the conditions of this License.  If you cannot
-distribute so as to satisfy simultaneously your obligations under this
-License and any other pertinent obligations, then as a consequence you
-may not distribute the Library at all.  For example, if a patent
-license would not permit royalty-free redistribution of the Library by
-all those who receive copies directly or indirectly through you, then
-the only way you could satisfy both it and this License would be to
-refrain entirely from distribution of the Library.
-
-If any portion of this section is held invalid or unenforceable under any
-particular circumstance, the balance of the section is intended to apply,
-and the section as a whole is intended to apply in other circumstances.
-
-It is not the purpose of this section to induce you to infringe any
-patents or other property right claims or to contest validity of any
-such claims; this section has the sole purpose of protecting the
-integrity of the free software distribution system which is
-implemented by public license practices.  Many people have made
-generous contributions to the wide range of software distributed
-through that system in reliance on consistent application of that
-system; it is up to the author/donor to decide if he or she is willing
-to distribute software through any other system and a licensee cannot
-impose that choice.
-
-This section is intended to make thoroughly clear what is believed to
-be a consequence of the rest of this License.
-
-  12. If the distribution and/or use of the Library is restricted in
-certain countries either by patents or by copyrighted interfaces, the
-original copyright holder who places the Library under this License may add
-an explicit geographical distribution limitation excluding those countries,
-so that distribution is permitted only in or among countries not thus
-excluded.  In such case, this License incorporates the limitation as if
-written in the body of this License.
-
-  13. The Free Software Foundation may publish revised and/or new
-versions of the Lesser General Public License from time to time.
-Such new versions will be similar in spirit to the present version,
-but may differ in detail to address new problems or concerns.
-
-Each version is given a distinguishing version number.  If the Library
-specifies a version number of this License which applies to it and
-"any later version", you have the option of following the terms and
-conditions either of that version or of any later version published by
-the Free Software Foundation.  If the Library does not specify a
-license version number, you may choose any version ever published by
-the Free Software Foundation.
-
-  14. If you wish to incorporate parts of the Library into other free
-programs whose distribution conditions are incompatible with these,
-write to the author to ask for permission.  For software which is
-copyrighted by the Free Software Foundation, write to the Free
-Software Foundation; we sometimes make exceptions for this.  Our
-decision will be guided by the two goals of preserving the free status
-of all derivatives of our free software and of promoting the sharing
-and reuse of software generally.
-
-			    NO WARRANTY
-
-  15. BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE, THERE IS NO
-WARRANTY FOR THE LIBRARY, TO THE EXTENT PERMITTED BY APPLICABLE LAW.
-EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR
-OTHER PARTIES PROVIDE THE LIBRARY "AS IS" WITHOUT WARRANTY OF ANY
-KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE
-IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
-PURPOSE.  THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE
-LIBRARY IS WITH YOU.  SHOULD THE LIBRARY PROVE DEFECTIVE, YOU ASSUME
-THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
-
-  16. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN
-WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY
-AND/OR REDISTRIBUTE THE LIBRARY AS PERMITTED ABOVE, BE LIABLE TO YOU
-FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR
-CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE
-LIBRARY (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING
-RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A
-FAILURE OF THE LIBRARY TO OPERATE WITH ANY OTHER SOFTWARE), EVEN IF
-SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
-DAMAGES.
-
-		     END OF TERMS AND CONDITIONS
-
-           How to Apply These Terms to Your New Libraries
-
-  If you develop a new library, and you want it to be of the greatest
-possible use to the public, we recommend making it free software that
-everyone can redistribute and change.  You can do so by permitting
-redistribution under these terms (or, alternatively, under the terms of the
-ordinary General Public License).
-
-  To apply these terms, attach the following notices to the library.  It is
-safest to attach them to the start of each source file to most effectively
-convey the exclusion of warranty; and each file should have at least the
-"copyright" line and a pointer to where the full notice is found.
-
-    <one line to give the library's name and a brief idea of what it does.>
-    Copyright (C) <year>  <name of author>
-
-    This library is free software; you can redistribute it and/or
-    modify it under the terms of the GNU Lesser General Public
-    License as published by the Free Software Foundation; either
-    version 2.1 of the License, or (at your option) any later version.
-
-    This library is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-    Lesser General Public License for more details.
-
-    You should have received a copy of the GNU Lesser General Public
-    License along with this library; if not, write to the Free Software
-    Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-
-Also add information on how to contact you by electronic and paper mail.
-
-You should also get your employer (if you work as a programmer) or your
-school, if any, to sign a "copyright disclaimer" for the library, if
-necessary.  Here is a sample; alter the names:
-
-  Yoyodyne, Inc., hereby disclaims all copyright interest in the
-  library `Frob' (a library for tweaking knobs) written by James Random Hacker.
-
-  <signature of Ty Coon>, 1 April 1990
-  Ty Coon, President of Vice
-
-That's all there is to it!
-
-
+		  GNU LESSER GENERAL PUBLIC LICENSE
+		       Version 2.1, February 1999
+
+ Copyright (C) 1991, 1999 Free Software Foundation, Inc.
+     59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ Everyone is permitted to copy and distribute verbatim copies
+ of this license document, but changing it is not allowed.
+
+[This is the first released version of the Lesser GPL.  It also counts
+ as the successor of the GNU Library Public License, version 2, hence
+ the version number 2.1.]
+
+			    Preamble
+
+  The licenses for most software are designed to take away your
+freedom to share and change it.  By contrast, the GNU General Public
+Licenses are intended to guarantee your freedom to share and change
+free software--to make sure the software is free for all its users.
+
+  This license, the Lesser General Public License, applies to some
+specially designated software packages--typically libraries--of the
+Free Software Foundation and other authors who decide to use it.  You
+can use it too, but we suggest you first think carefully about whether
+this license or the ordinary General Public License is the better
+strategy to use in any particular case, based on the explanations below.
+
+  When we speak of free software, we are referring to freedom of use,
+not price.  Our General Public Licenses are designed to make sure that
+you have the freedom to distribute copies of free software (and charge
+for this service if you wish); that you receive source code or can get
+it if you want it; that you can change the software and use pieces of
+it in new free programs; and that you are informed that you can do
+these things.
+
+  To protect your rights, we need to make restrictions that forbid
+distributors to deny you these rights or to ask you to surrender these
+rights.  These restrictions translate to certain responsibilities for
+you if you distribute copies of the library or if you modify it.
+
+  For example, if you distribute copies of the library, whether gratis
+or for a fee, you must give the recipients all the rights that we gave
+you.  You must make sure that they, too, receive or can get the source
+code.  If you link other code with the library, you must provide
+complete object files to the recipients, so that they can relink them
+with the library after making changes to the library and recompiling
+it.  And you must show them these terms so they know their rights.
+
+  We protect your rights with a two-step method: (1) we copyright the
+library, and (2) we offer you this license, which gives you legal
+permission to copy, distribute and/or modify the library.
+
+  To protect each distributor, we want to make it very clear that
+there is no warranty for the free library.  Also, if the library is
+modified by someone else and passed on, the recipients should know
+that what they have is not the original version, so that the original
+author's reputation will not be affected by problems that might be
+introduced by others.
+
+  Finally, software patents pose a constant threat to the existence of
+any free program.  We wish to make sure that a company cannot
+effectively restrict the users of a free program by obtaining a
+restrictive license from a patent holder.  Therefore, we insist that
+any patent license obtained for a version of the library must be
+consistent with the full freedom of use specified in this license.
+
+  Most GNU software, including some libraries, is covered by the
+ordinary GNU General Public License.  This license, the GNU Lesser
+General Public License, applies to certain designated libraries, and
+is quite different from the ordinary General Public License.  We use
+this license for certain libraries in order to permit linking those
+libraries into non-free programs.
+
+  When a program is linked with a library, whether statically or using
+a shared library, the combination of the two is legally speaking a
+combined work, a derivative of the original library.  The ordinary
+General Public License therefore permits such linking only if the
+entire combination fits its criteria of freedom.  The Lesser General
+Public License permits more lax criteria for linking other code with
+the library.
+
+  We call this license the "Lesser" General Public License because it
+does Less to protect the user's freedom than the ordinary General
+Public License.  It also provides other free software developers Less
+of an advantage over competing non-free programs.  These disadvantages
+are the reason we use the ordinary General Public License for many
+libraries.  However, the Lesser license provides advantages in certain
+special circumstances.
+
+  For example, on rare occasions, there may be a special need to
+encourage the widest possible use of a certain library, so that it becomes
+a de-facto standard.  To achieve this, non-free programs must be
+allowed to use the library.  A more frequent case is that a free
+library does the same job as widely used non-free libraries.  In this
+case, there is little to gain by limiting the free library to free
+software only, so we use the Lesser General Public License.
+
+  In other cases, permission to use a particular library in non-free
+programs enables a greater number of people to use a large body of
+free software.  For example, permission to use the GNU C Library in
+non-free programs enables many more people to use the whole GNU
+operating system, as well as its variant, the GNU/Linux operating
+system.
+
+  Although the Lesser General Public License is Less protective of the
+users' freedom, it does ensure that the user of a program that is
+linked with the Library has the freedom and the wherewithal to run
+that program using a modified version of the Library.
+
+  The precise terms and conditions for copying, distribution and
+modification follow.  Pay close attention to the difference between a
+"work based on the library" and a "work that uses the library".  The
+former contains code derived from the library, whereas the latter must
+be combined with the library in order to run.
+
+		  GNU LESSER GENERAL PUBLIC LICENSE
+   TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
+
+  0. This License Agreement applies to any software library or other
+program which contains a notice placed by the copyright holder or
+other authorized party saying it may be distributed under the terms of
+this Lesser General Public License (also called "this License").
+Each licensee is addressed as "you".
+
+  A "library" means a collection of software functions and/or data
+prepared so as to be conveniently linked with application programs
+(which use some of those functions and data) to form executables.
+
+  The "Library", below, refers to any such software library or work
+which has been distributed under these terms.  A "work based on the
+Library" means either the Library or any derivative work under
+copyright law: that is to say, a work containing the Library or a
+portion of it, either verbatim or with modifications and/or translated
+straightforwardly into another language.  (Hereinafter, translation is
+included without limitation in the term "modification".)
+
+  "Source code" for a work means the preferred form of the work for
+making modifications to it.  For a library, complete source code means
+all the source code for all modules it contains, plus any associated
+interface definition files, plus the scripts used to control compilation
+and installation of the library.
+
+  Activities other than copying, distribution and modification are not
+covered by this License; they are outside its scope.  The act of
+running a program using the Library is not restricted, and output from
+such a program is covered only if its contents constitute a work based
+on the Library (independent of the use of the Library in a tool for
+writing it).  Whether that is true depends on what the Library does
+and what the program that uses the Library does.
+  
+  1. You may copy and distribute verbatim copies of the Library's
+complete source code as you receive it, in any medium, provided that
+you conspicuously and appropriately publish on each copy an
+appropriate copyright notice and disclaimer of warranty; keep intact
+all the notices that refer to this License and to the absence of any
+warranty; and distribute a copy of this License along with the
+Library.
+
+  You may charge a fee for the physical act of transferring a copy,
+and you may at your option offer warranty protection in exchange for a
+fee.
+
+  2. You may modify your copy or copies of the Library or any portion
+of it, thus forming a work based on the Library, and copy and
+distribute such modifications or work under the terms of Section 1
+above, provided that you also meet all of these conditions:
+
+    a) The modified work must itself be a software library.
+
+    b) You must cause the files modified to carry prominent notices
+    stating that you changed the files and the date of any change.
+
+    c) You must cause the whole of the work to be licensed at no
+    charge to all third parties under the terms of this License.
+
+    d) If a facility in the modified Library refers to a function or a
+    table of data to be supplied by an application program that uses
+    the facility, other than as an argument passed when the facility
+    is invoked, then you must make a good faith effort to ensure that,
+    in the event an application does not supply such function or
+    table, the facility still operates, and performs whatever part of
+    its purpose remains meaningful.
+
+    (For example, a function in a library to compute square roots has
+    a purpose that is entirely well-defined independent of the
+    application.  Therefore, Subsection 2d requires that any
+    application-supplied function or table used by this function must
+    be optional: if the application does not supply it, the square
+    root function must still compute square roots.)
+
+These requirements apply to the modified work as a whole.  If
+identifiable sections of that work are not derived from the Library,
+and can be reasonably considered independent and separate works in
+themselves, then this License, and its terms, do not apply to those
+sections when you distribute them as separate works.  But when you
+distribute the same sections as part of a whole which is a work based
+on the Library, the distribution of the whole must be on the terms of
+this License, whose permissions for other licensees extend to the
+entire whole, and thus to each and every part regardless of who wrote
+it.
+
+Thus, it is not the intent of this section to claim rights or contest
+your rights to work written entirely by you; rather, the intent is to
+exercise the right to control the distribution of derivative or
+collective works based on the Library.
+
+In addition, mere aggregation of another work not based on the Library
+with the Library (or with a work based on the Library) on a volume of
+a storage or distribution medium does not bring the other work under
+the scope of this License.
+
+  3. You may opt to apply the terms of the ordinary GNU General Public
+License instead of this License to a given copy of the Library.  To do
+this, you must alter all the notices that refer to this License, so
+that they refer to the ordinary GNU General Public License, version 2,
+instead of to this License.  (If a newer version than version 2 of the
+ordinary GNU General Public License has appeared, then you can specify
+that version instead if you wish.)  Do not make any other change in
+these notices.
+
+  Once this change is made in a given copy, it is irreversible for
+that copy, so the ordinary GNU General Public License applies to all
+subsequent copies and derivative works made from that copy.
+
+  This option is useful when you wish to copy part of the code of
+the Library into a program that is not a library.
+
+  4. You may copy and distribute the Library (or a portion or
+derivative of it, under Section 2) in object code or executable form
+under the terms of Sections 1 and 2 above provided that you accompany
+it with the complete corresponding machine-readable source code, which
+must be distributed under the terms of Sections 1 and 2 above on a
+medium customarily used for software interchange.
+
+  If distribution of object code is made by offering access to copy
+from a designated place, then offering equivalent access to copy the
+source code from the same place satisfies the requirement to
+distribute the source code, even though third parties are not
+compelled to copy the source along with the object code.
+
+  5. A program that contains no derivative of any portion of the
+Library, but is designed to work with the Library by being compiled or
+linked with it, is called a "work that uses the Library".  Such a
+work, in isolation, is not a derivative work of the Library, and
+therefore falls outside the scope of this License.
+
+  However, linking a "work that uses the Library" with the Library
+creates an executable that is a derivative of the Library (because it
+contains portions of the Library), rather than a "work that uses the
+library".  The executable is therefore covered by this License.
+Section 6 states terms for distribution of such executables.
+
+  When a "work that uses the Library" uses material from a header file
+that is part of the Library, the object code for the work may be a
+derivative work of the Library even though the source code is not.
+Whether this is true is especially significant if the work can be
+linked without the Library, or if the work is itself a library.  The
+threshold for this to be true is not precisely defined by law.
+
+  If such an object file uses only numerical parameters, data
+structure layouts and accessors, and small macros and small inline
+functions (ten lines or less in length), then the use of the object
+file is unrestricted, regardless of whether it is legally a derivative
+work.  (Executables containing this object code plus portions of the
+Library will still fall under Section 6.)
+
+  Otherwise, if the work is a derivative of the Library, you may
+distribute the object code for the work under the terms of Section 6.
+Any executables containing that work also fall under Section 6,
+whether or not they are linked directly with the Library itself.
+
+  6. As an exception to the Sections above, you may also combine or
+link a "work that uses the Library" with the Library to produce a
+work containing portions of the Library, and distribute that work
+under terms of your choice, provided that the terms permit
+modification of the work for the customer's own use and reverse
+engineering for debugging such modifications.
+
+  You must give prominent notice with each copy of the work that the
+Library is used in it and that the Library and its use are covered by
+this License.  You must supply a copy of this License.  If the work
+during execution displays copyright notices, you must include the
+copyright notice for the Library among them, as well as a reference
+directing the user to the copy of this License.  Also, you must do one
+of these things:
+
+    a) Accompany the work with the complete corresponding
+    machine-readable source code for the Library including whatever
+    changes were used in the work (which must be distributed under
+    Sections 1 and 2 above); and, if the work is an executable linked
+    with the Library, with the complete machine-readable "work that
+    uses the Library", as object code and/or source code, so that the
+    user can modify the Library and then relink to produce a modified
+    executable containing the modified Library.  (It is understood
+    that the user who changes the contents of definitions files in the
+    Library will not necessarily be able to recompile the application
+    to use the modified definitions.)
+
+    b) Use a suitable shared library mechanism for linking with the
+    Library.  A suitable mechanism is one that (1) uses at run time a
+    copy of the library already present on the user's computer system,
+    rather than copying library functions into the executable, and (2)
+    will operate properly with a modified version of the library, if
+    the user installs one, as long as the modified version is
+    interface-compatible with the version that the work was made with.
+
+    c) Accompany the work with a written offer, valid for at
+    least three years, to give the same user the materials
+    specified in Subsection 6a, above, for a charge no more
+    than the cost of performing this distribution.
+
+    d) If distribution of the work is made by offering access to copy
+    from a designated place, offer equivalent access to copy the above
+    specified materials from the same place.
+
+    e) Verify that the user has already received a copy of these
+    materials or that you have already sent this user a copy.
+
+  For an executable, the required form of the "work that uses the
+Library" must include any data and utility programs needed for
+reproducing the executable from it.  However, as a special exception,
+the materials to be distributed need not include anything that is
+normally distributed (in either source or binary form) with the major
+components (compiler, kernel, and so on) of the operating system on
+which the executable runs, unless that component itself accompanies
+the executable.
+
+  It may happen that this requirement contradicts the license
+restrictions of other proprietary libraries that do not normally
+accompany the operating system.  Such a contradiction means you cannot
+use both them and the Library together in an executable that you
+distribute.
+
+  7. You may place library facilities that are a work based on the
+Library side-by-side in a single library together with other library
+facilities not covered by this License, and distribute such a combined
+library, provided that the separate distribution of the work based on
+the Library and of the other library facilities is otherwise
+permitted, and provided that you do these two things:
+
+    a) Accompany the combined library with a copy of the same work
+    based on the Library, uncombined with any other library
+    facilities.  This must be distributed under the terms of the
+    Sections above.
+
+    b) Give prominent notice with the combined library of the fact
+    that part of it is a work based on the Library, and explaining
+    where to find the accompanying uncombined form of the same work.
+
+  8. You may not copy, modify, sublicense, link with, or distribute
+the Library except as expressly provided under this License.  Any
+attempt otherwise to copy, modify, sublicense, link with, or
+distribute the Library is void, and will automatically terminate your
+rights under this License.  However, parties who have received copies,
+or rights, from you under this License will not have their licenses
+terminated so long as such parties remain in full compliance.
+
+  9. You are not required to accept this License, since you have not
+signed it.  However, nothing else grants you permission to modify or
+distribute the Library or its derivative works.  These actions are
+prohibited by law if you do not accept this License.  Therefore, by
+modifying or distributing the Library (or any work based on the
+Library), you indicate your acceptance of this License to do so, and
+all its terms and conditions for copying, distributing or modifying
+the Library or works based on it.
+
+  10. Each time you redistribute the Library (or any work based on the
+Library), the recipient automatically receives a license from the
+original licensor to copy, distribute, link with or modify the Library
+subject to these terms and conditions.  You may not impose any further
+restrictions on the recipients' exercise of the rights granted herein.
+You are not responsible for enforcing compliance by third parties with
+this License.
+
+  11. If, as a consequence of a court judgment or allegation of patent
+infringement or for any other reason (not limited to patent issues),
+conditions are imposed on you (whether by court order, agreement or
+otherwise) that contradict the conditions of this License, they do not
+excuse you from the conditions of this License.  If you cannot
+distribute so as to satisfy simultaneously your obligations under this
+License and any other pertinent obligations, then as a consequence you
+may not distribute the Library at all.  For example, if a patent
+license would not permit royalty-free redistribution of the Library by
+all those who receive copies directly or indirectly through you, then
+the only way you could satisfy both it and this License would be to
+refrain entirely from distribution of the Library.
+
+If any portion of this section is held invalid or unenforceable under any
+particular circumstance, the balance of the section is intended to apply,
+and the section as a whole is intended to apply in other circumstances.
+
+It is not the purpose of this section to induce you to infringe any
+patents or other property right claims or to contest validity of any
+such claims; this section has the sole purpose of protecting the
+integrity of the free software distribution system which is
+implemented by public license practices.  Many people have made
+generous contributions to the wide range of software distributed
+through that system in reliance on consistent application of that
+system; it is up to the author/donor to decide if he or she is willing
+to distribute software through any other system and a licensee cannot
+impose that choice.
+
+This section is intended to make thoroughly clear what is believed to
+be a consequence of the rest of this License.
+
+  12. If the distribution and/or use of the Library is restricted in
+certain countries either by patents or by copyrighted interfaces, the
+original copyright holder who places the Library under this License may add
+an explicit geographical distribution limitation excluding those countries,
+so that distribution is permitted only in or among countries not thus
+excluded.  In such case, this License incorporates the limitation as if
+written in the body of this License.
+
+  13. The Free Software Foundation may publish revised and/or new
+versions of the Lesser General Public License from time to time.
+Such new versions will be similar in spirit to the present version,
+but may differ in detail to address new problems or concerns.
+
+Each version is given a distinguishing version number.  If the Library
+specifies a version number of this License which applies to it and
+"any later version", you have the option of following the terms and
+conditions either of that version or of any later version published by
+the Free Software Foundation.  If the Library does not specify a
+license version number, you may choose any version ever published by
+the Free Software Foundation.
+
+  14. If you wish to incorporate parts of the Library into other free
+programs whose distribution conditions are incompatible with these,
+write to the author to ask for permission.  For software which is
+copyrighted by the Free Software Foundation, write to the Free
+Software Foundation; we sometimes make exceptions for this.  Our
+decision will be guided by the two goals of preserving the free status
+of all derivatives of our free software and of promoting the sharing
+and reuse of software generally.
+
+			    NO WARRANTY
+
+  15. BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE, THERE IS NO
+WARRANTY FOR THE LIBRARY, TO THE EXTENT PERMITTED BY APPLICABLE LAW.
+EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR
+OTHER PARTIES PROVIDE THE LIBRARY "AS IS" WITHOUT WARRANTY OF ANY
+KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE
+IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+PURPOSE.  THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE
+LIBRARY IS WITH YOU.  SHOULD THE LIBRARY PROVE DEFECTIVE, YOU ASSUME
+THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
+
+  16. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN
+WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY
+AND/OR REDISTRIBUTE THE LIBRARY AS PERMITTED ABOVE, BE LIABLE TO YOU
+FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR
+CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE
+LIBRARY (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING
+RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A
+FAILURE OF THE LIBRARY TO OPERATE WITH ANY OTHER SOFTWARE), EVEN IF
+SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
+DAMAGES.
+
+		     END OF TERMS AND CONDITIONS
+
+           How to Apply These Terms to Your New Libraries
+
+  If you develop a new library, and you want it to be of the greatest
+possible use to the public, we recommend making it free software that
+everyone can redistribute and change.  You can do so by permitting
+redistribution under these terms (or, alternatively, under the terms of the
+ordinary General Public License).
+
+  To apply these terms, attach the following notices to the library.  It is
+safest to attach them to the start of each source file to most effectively
+convey the exclusion of warranty; and each file should have at least the
+"copyright" line and a pointer to where the full notice is found.
+
+    <one line to give the library's name and a brief idea of what it does.>
+    Copyright (C) <year>  <name of author>
+
+    This library is free software; you can redistribute it and/or
+    modify it under the terms of the GNU Lesser General Public
+    License as published by the Free Software Foundation; either
+    version 2.1 of the License, or (at your option) any later version.
+
+    This library is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+    Lesser General Public License for more details.
+
+    You should have received a copy of the GNU Lesser General Public
+    License along with this library; if not, write to the Free Software
+    Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+
+Also add information on how to contact you by electronic and paper mail.
+
+You should also get your employer (if you work as a programmer) or your
+school, if any, to sign a "copyright disclaimer" for the library, if
+necessary.  Here is a sample; alter the names:
+
+  Yoyodyne, Inc., hereby disclaims all copyright interest in the
+  library `Frob' (a library for tweaking knobs) written by James Random Hacker.
+
+  <signature of Ty Coon>, 1 April 1990
+  Ty Coon, President of Vice
+
+That's all there is to it!
+
+
diff -Nru /tmp/bxdedfLB6u/uriparser-0.6.0/test/CppTest/cpptest-assert.h /tmp/fLjZ2dz9P3/uriparser-0.7.4/test/CppTest/cpptest-assert.h
--- uriparser-0.6.0/test/CppTest/cpptest-assert.h	2007-07-06 00:25:45.000000000 +0100
+++ uriparser-0.7.4/test/CppTest/cpptest-assert.h	2008-12-20 18:52:46.000000000 +0000
@@ -1,6 +1,6 @@
 // ---
 //
-// $Id: cpptest-assert.h,v 1.2 2004/02/04 21:08:23 nilu Exp $
+// $Id: cpptest-assert.h,v 1.3 2005/06/08 08:08:06 nilu Exp $
 //
 // CppTest - A C++ Unit Testing Framework
 // Copyright (c) 2003 Niklas Lundell
diff -Nru /tmp/bxdedfLB6u/uriparser-0.6.0/test/CppTest/cpptest-collectoroutput.h /tmp/fLjZ2dz9P3/uriparser-0.7.4/test/CppTest/cpptest-collectoroutput.h
--- uriparser-0.6.0/test/CppTest/cpptest-collectoroutput.h	2007-07-06 00:25:45.000000000 +0100
+++ uriparser-0.7.4/test/CppTest/cpptest-collectoroutput.h	2008-12-20 18:52:46.000000000 +0000
@@ -1,6 +1,6 @@
 // ---
 //
-// $Id: cpptest-collectoroutput.h,v 1.2 2004/02/04 21:08:23 nilu Exp $
+// $Id: cpptest-collectoroutput.h,v 1.3 2005/06/08 08:08:06 nilu Exp $
 //
 // CppTest - A C++ Unit Testing Framework
 // Copyright (c) 2003 Niklas Lundell
diff -Nru /tmp/bxdedfLB6u/uriparser-0.6.0/test/CppTest/cpptest-compileroutput.h /tmp/fLjZ2dz9P3/uriparser-0.7.4/test/CppTest/cpptest-compileroutput.h
--- uriparser-0.6.0/test/CppTest/cpptest-compileroutput.h	2007-07-06 00:25:45.000000000 +0100
+++ uriparser-0.7.4/test/CppTest/cpptest-compileroutput.h	2008-12-20 18:52:46.000000000 +0000
@@ -1,6 +1,6 @@
 // ---
 //
-// $Id: cpptest-compileroutput.h,v 1.2 2004/02/04 21:08:23 nilu Exp $
+// $Id: cpptest-compileroutput.h,v 1.3 2005/06/08 08:08:06 nilu Exp $
 //
 // CppTest - A C++ Unit Testing Framework
 // Copyright (c) 2003 Niklas Lundell
diff -Nru /tmp/bxdedfLB6u/uriparser-0.6.0/test/CppTest/cpptest.h /tmp/fLjZ2dz9P3/uriparser-0.7.4/test/CppTest/cpptest.h
--- uriparser-0.6.0/test/CppTest/cpptest.h	2007-07-06 00:25:45.000000000 +0100
+++ uriparser-0.7.4/test/CppTest/cpptest.h	2008-12-20 18:52:46.000000000 +0000
@@ -1,6 +1,6 @@
 // ---
 //
-// $Id: cpptest.h,v 1.2 2004/02/04 21:08:23 nilu Exp $
+// $Id: cpptest.h,v 1.3 2005/06/08 08:08:06 nilu Exp $
 //
 // CppTest - A C++ Unit Testing Framework
 // Copyright (c) 2003 Niklas Lundell
diff -Nru /tmp/bxdedfLB6u/uriparser-0.6.0/test/CppTest/cpptest-htmloutput.h /tmp/fLjZ2dz9P3/uriparser-0.7.4/test/CppTest/cpptest-htmloutput.h
--- uriparser-0.6.0/test/CppTest/cpptest-htmloutput.h	2007-07-06 00:25:45.000000000 +0100
+++ uriparser-0.7.4/test/CppTest/cpptest-htmloutput.h	2008-12-20 18:52:46.000000000 +0000
@@ -1,6 +1,6 @@
 // ---
 //
-// $Id: cpptest-htmloutput.h,v 1.2 2004/02/04 21:08:23 nilu Exp $
+// $Id: cpptest-htmloutput.h,v 1.3 2005/06/08 08:08:06 nilu Exp $
 //
 // CppTest - A C++ Unit Testing Framework
 // Copyright (c) 2003 Niklas Lundell
diff -Nru /tmp/bxdedfLB6u/uriparser-0.6.0/test/CppTest/cpptest-output.h /tmp/fLjZ2dz9P3/uriparser-0.7.4/test/CppTest/cpptest-output.h
--- uriparser-0.6.0/test/CppTest/cpptest-output.h	2007-07-06 00:25:45.000000000 +0100
+++ uriparser-0.7.4/test/CppTest/cpptest-output.h	2008-12-20 18:52:46.000000000 +0000
@@ -1,6 +1,6 @@
 // ---
 //
-// $Id: cpptest-output.h,v 1.3 2004/02/05 12:46:08 nilu Exp $
+// $Id: cpptest-output.h,v 1.7 2008/07/15 21:20:26 hartwork Exp $
 //
 // CppTest - A C++ Unit Testing Framework
 // Copyright (c) 2003 Niklas Lundell
@@ -31,6 +31,12 @@
 
 #include <string>
 
+#ifdef _MSC_VER
+# define CPPTEST_UNUSED(x)
+#else
+# define CPPTEST_UNUSED(x) (void)x
+#endif
+
 namespace Test
 {
 	class Source;
@@ -57,21 +63,32 @@
 		///
 		/// \param tests Total number of tests in all suites.
 		///
-		virtual void initialize(int /*tests*/) {}
+		virtual void initialize(int tests)
+		{
+			CPPTEST_UNUSED(tests);
+		}
 		
 		/// Called when testing is finished.
 		///
 		/// \param tests Total number of tests in all suites.
 		/// \param time  Total elapsed time for all tests.
 		///
-		virtual void finished(int tests, const Time& time) {}
+		virtual void finished(int tests, const Time& time)
+		{
+			CPPTEST_UNUSED(tests);
+			CPPTEST_UNUSED(time);
+		}
 
 		/// Called when a suite is entered.
 		///
 		/// \param tests Number of tests in this suite.
 		/// \param name  Name of the suite.
 		///
-		virtual void suite_start(int tests, const std::string& name) {}
+		virtual void suite_start(int tests, const std::string& name)
+		{
+			CPPTEST_UNUSED(tests);
+			CPPTEST_UNUSED(name);
+		}
 		
 		/// Called when a suite is finished.
 		///
@@ -80,13 +97,21 @@
 		/// \param time  Total elapsed time for all tests in this suite.
 		///
 		virtual void suite_end(int tests, const std::string& name,
-							   const Time& time) {}
+							   const Time& time)
+		{
+			CPPTEST_UNUSED(tests);
+			CPPTEST_UNUSED(name);
+			CPPTEST_UNUSED(time);
+		}
 		
 		/// Called when a tests is executed.
 		///
 		/// \param name Name of the test function.
 		///
-		virtual void test_start(const std::string& name) {}
+		virtual void test_start(const std::string& name)
+		{
+			CPPTEST_UNUSED(name);
+		}
 		
 		/// Called when a test if finished, regardless if an assertment was
 		/// issued.
@@ -96,13 +121,21 @@
 		/// \param time  Execution time.
 		///
 		virtual void test_end(const std::string& name, bool ok,
-							  const Time& time) {}
+							  const Time& time)
+		{
+			CPPTEST_UNUSED(name);
+			CPPTEST_UNUSED(ok);
+			CPPTEST_UNUSED(time);
+		}
 		
 		/// Called when an assertment is issued.
 		///
 		/// \param s Assert point information.
 		///
-		virtual void assertment(const Source& s) {}
+		virtual void assertment(const Source& s)
+		{
+			CPPTEST_UNUSED(s);
+		}
 
 	protected:
 		/// Empty constructor.
@@ -117,5 +150,3 @@
 } // namespace Test
 	
 #endif // #ifndef CPPTEST_OUTPUT_H
-
-
diff -Nru /tmp/bxdedfLB6u/uriparser-0.6.0/test/CppTest/cpptest-source.h /tmp/fLjZ2dz9P3/uriparser-0.7.4/test/CppTest/cpptest-source.h
--- uriparser-0.6.0/test/CppTest/cpptest-source.h	2007-07-06 00:25:45.000000000 +0100
+++ uriparser-0.7.4/test/CppTest/cpptest-source.h	2008-12-20 18:52:46.000000000 +0000
@@ -1,6 +1,6 @@
 // ---
 //
-// $Id: cpptest-source.h,v 1.2 2004/02/04 21:08:23 nilu Exp $
+// $Id: cpptest-source.h,v 1.3 2005/06/08 08:08:06 nilu Exp $
 //
 // CppTest - A C++ Unit Testing Framework
 // Copyright (c) 2003 Niklas Lundell
diff -Nru /tmp/bxdedfLB6u/uriparser-0.6.0/test/CppTest/cpptest-suite.h /tmp/fLjZ2dz9P3/uriparser-0.7.4/test/CppTest/cpptest-suite.h
--- uriparser-0.6.0/test/CppTest/cpptest-suite.h	2007-07-06 00:25:45.000000000 +0100
+++ uriparser-0.7.4/test/CppTest/cpptest-suite.h	2008-12-20 18:52:46.000000000 +0000
@@ -1,6 +1,6 @@
 // ---
 //
-// $Id: cpptest-suite.h,v 1.2 2004/02/04 21:08:23 nilu Exp $
+// $Id: cpptest-suite.h,v 1.3 2005/06/08 08:08:06 nilu Exp $
 //
 // CppTest - A C++ Unit Testing Framework
 // Copyright (c) 2003 Niklas Lundell
diff -Nru /tmp/bxdedfLB6u/uriparser-0.6.0/test/CppTest/cpptest-textoutput.h /tmp/fLjZ2dz9P3/uriparser-0.7.4/test/CppTest/cpptest-textoutput.h
--- uriparser-0.6.0/test/CppTest/cpptest-textoutput.h	2007-07-06 00:25:45.000000000 +0100
+++ uriparser-0.7.4/test/CppTest/cpptest-textoutput.h	2008-12-20 18:52:46.000000000 +0000
@@ -1,6 +1,6 @@
 // ---
 //
-// $Id: cpptest-textoutput.h,v 1.2 2004/02/04 21:08:23 nilu Exp $
+// $Id: cpptest-textoutput.h,v 1.3 2005/06/08 08:08:06 nilu Exp $
 //
 // CppTest - A C++ Unit Testing Framework
 // Copyright (c) 2003 Niklas Lundell
diff -Nru /tmp/bxdedfLB6u/uriparser-0.6.0/test/CppTest/cpptest-time.h /tmp/fLjZ2dz9P3/uriparser-0.7.4/test/CppTest/cpptest-time.h
--- uriparser-0.6.0/test/CppTest/cpptest-time.h	2007-07-06 00:25:45.000000000 +0100
+++ uriparser-0.7.4/test/CppTest/cpptest-time.h	2008-12-20 18:52:46.000000000 +0000
@@ -1,6 +1,6 @@
 // ---
 //
-// $Id: cpptest-time.h,v 1.2 2004/02/04 21:08:23 nilu Exp $
+// $Id: cpptest-time.h,v 1.3 2005/06/08 08:08:06 nilu Exp $
 //
 // CppTest - A C++ Unit Testing Framework
 // Copyright (c) 2003 Niklas Lundell
diff -Nru /tmp/bxdedfLB6u/uriparser-0.6.0/test/CppTest/htmloutput.cpp /tmp/fLjZ2dz9P3/uriparser-0.7.4/test/CppTest/htmloutput.cpp
--- uriparser-0.6.0/test/CppTest/htmloutput.cpp	2007-07-06 00:25:45.000000000 +0100
+++ uriparser-0.7.4/test/CppTest/htmloutput.cpp	2008-12-20 18:52:46.000000000 +0000
@@ -1,6 +1,6 @@
 // ---
 //
-// $Id: htmloutput.cpp,v 1.2 2004/02/04 21:08:23 nilu Exp $
+// $Id: htmloutput.cpp,v 1.7 2008/07/15 20:33:31 hartwork Exp $
 //
 // CppTest - A C++ Unit Testing Framework
 // Copyright (c) 2003 Niklas Lundell
@@ -31,7 +31,8 @@
 # include "winconfig.h"
 #else
 # include "config.h"
-#endif
+#endif 
+
 #include "cpptest-htmloutput.h"
 #include "utils.h"
 
@@ -42,23 +43,45 @@
 	namespace
 	{
 		void
+		strreplace(string &value, char search, const string &replace)
+		{
+			string::size_type idx = 0;
+			while((idx = value.find(search, idx)) != string::npos)
+			{
+				value.replace(idx, 1, replace);
+				idx += replace.size();
+			}
+		}
+		
+		string
+		escape(string value)
+		{
+			strreplace(value, '&', "&amp;");
+			strreplace(value, '<', "&lt;");
+			strreplace(value, '>', "&gt;");
+			strreplace(value, '"', "&quot;");
+			strreplace(value, '\'', "&#39;");
+			return value;
+		}
+		
+		void
 		header(ostream& os, string name)
 		{
 			if (!name.empty())
 				name += " ";
-			
+			name = escape(name);
 			os <<
-				"<!doctype doctype public \"-//W3C//DTD HTML 4.0 Transitional//EN\">\n"
-				"<html>\n"
+				"<!DOCTYPE html PUBLIC \"-//W3C//DTD XHTML 1.0 Strict//EN\" \"http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd\">\n"
+				"<html xmlns=\"http://www.w3.org/1999/xhtml\" xml:lang=\"en\" lang=\"en\">\n"
 				"<head>\n"
-				"  <meta http-equiv=\"content-type\" content=\"text/html; charset=utf-8\">\n"
-				"  <meta name=\"generator\" content=\"CppTest - http://cpptest.sourceforge.net\">\n"
+				"  <meta http-equiv=\"content-type\" content=\"text/html; charset=utf-8\" />\n"
+				"  <meta name=\"generator\" content=\"CppTest - http://cpptest.sourceforge.net\" />\n"
 				"  \n"
 				"  <title>" << name << "Unit Tests Results</title>\n"
 				"  \n"
 				"  <style type=\"text/css\" media=\"screen\">\n"
 				"    <!--\n"
-				"    HR  {\n"
+				"    hr  {\n"
 				"      width: 100%;\n"
 				"      border-width: 0px;\n"
 				"      height: 1px;\n"
@@ -67,20 +90,51 @@
 				"      padding: 0px;\n"
 				"    }\n"
 				"    \n"
-				"    .table_title {\n"
+				"    table {\n"
+				"      width:100%;\n"
+				"      border-collapse:separate;\n"
+				"      border-spacing: 2px;\n"
+				"      border:0px;\n"
+				"    }\n"
+				"    tr {\n"
+				"      margin:0px;\n"
+				"      padding:0px;\n"
+				"    }\n"
+				"    td {\n"
+				"      margin:0px;\n"
+				"      padding:1px;\n"
+				"    }\n"
+				"    .table_summary {\n"
+				"    }\n"
+				"    .table_suites {\n"
+				"    }\n"
+				"    .table_suite {\n"
+				"    }\n"
+				"    .table_result {\n"
+				"      margin: 0px 0px 1em 0px;\n"
+				"    }\n"
+				"    .tablecell_title {\n"
 				"      background-color: #a5cef7;\n"
 				"      font-weight: bold;\n"
 				"    }\n"
 				"    \n"
-				"    .table_success {\n"
+				"    .tablecell_success {\n"
 				"      background-color: #efefe7;\n"
 				"    }\n"
 				"    \n"
-				"    .table_error {\n"
+				"    .tablecell_error {\n"
 				"      color: #ff0808;\n"
 				"      background-color: #efefe7;\n"
 				"      font-weight: bold;\n"
 				"    }\n"
+				"    p.spaced {\n"
+				"      margin: 0px;\n"
+				"      padding: 1em 0px 2em 0px;\n"
+				"    }\n"
+				"    p.unspaced {\n"
+				"      margin: 0px;\n"
+				"      padding: 0px 0px 2em 0px;\n"
+				"    }\n"
 				"    -->\n"
 				"  </style>\n"
 				"</head>\n"
@@ -89,46 +143,58 @@
 				"\n"
 				"<h1><a name=\"top\"></a>" << name << "Unit Tests Results</h1>\n"
 				"\n"
-				"<div align=\"right\">\n"
+				"<div style=\"text-align:right\">\n"
 				"Designed by <a href=\"http://cpptest.sourceforge.net\">CppTest</a>\n"
 				"</div>\n"
-				"<hr>\n"
+				"<hr />\n"
 				"\n";
 		}
 		
 		void
 		footer(ostream& os)
 		{
-			os << "\n</body>\n</html>\n";
+			os <<
+				"\n"
+				"<p>\n"
+				"  <a href=\"http://validator.w3.org/#validate-by-upload\">\n"
+				"    Valid XHTML 1.0 Strict\n"
+				"  </a>\n"
+				"</p>\n"
+				"</body>\n</html>\n";
 		}
-		
+				
 		void
-		marker(ostream& os, const string& mark)
+		back_ref(ostream& os, const string& ref, bool prepend_newline = true)
 		{
-			os << "<a name=\"" << mark << "\">";
+			
+			os	<< "<p class=\"" << (prepend_newline ? "spaced" : "unspaced") << "\"><a href=\"#" << ref
+				<< "\">Back to " << escape(ref) << "</a>\n</p>\n";
 		}
 		
 		void
-		back_ref(ostream& os, const string& ref, bool prepend_newline = true)
+		sub_title(ostream& os, const string& title, int size)
 		{
-			if (prepend_newline)
-				os << "<br>\n";
-			os	<< "<a href=\"#" << ref
-				<< "\">Back to " << ref << "</a>\n<br><br>\n";
+			ostringstream h;
+			h << "h" << size;
+			os << "<" << h.str() << ">" << escape(title) << "</" << h.str() << ">\n";
 		}
-		
+
 		void
-		sub_title(ostream& os, const string& title, int size)
+		sub_title(ostream& os, const string& title, int size, const string& mark)
 		{
 			ostringstream h;
 			h << "h" << size;
-			os << "<" << h.str() << ">" << title << "</" << h.str() << ">\n";
+			os << "<" << h.str() << "><a name=\"" << mark << "\"></a>" << escape(title) << "</" << h.str() << ">\n";
 		}
 			
+		enum ClassTableType { TableClass_Summary, TableClass_Suites, TableClass_Suite, TableClass_Result };
+		
 		void
-		table_header(ostream& os)
+		table_header(ostream& os, ClassTableType type, const string &summary = "")
 		{
-			os << "<table border=\"0\" width=\"100%\">\n";
+			static const char* class_tabletypes[] = { "summary", "suites", "suite", "result" };
+			
+			os << "<table summary=\"" << escape(summary) << "\" class=\"table_" << class_tabletypes[type] << "\">\n";
 		}
 		
 		void
@@ -157,14 +223,13 @@
 		{
 			static const char* class_types[] = { "title", "success", "error" };
 			
-			os << "    <td class=\"table_" << class_types[type] << "\"";
+			os << "    <td";
 			if (width)
-				os << "width=\"" << width << "%\"";
-			os << ">";
+				os << " style=\"width:" << width << "%\"";
 			if (!link.empty())
-				os << "<a href=\"#" << link << "\">" << s << "</a>";
+				os << " class=\"tablecell_" << class_types[type] << "\"><a href=\"#" << link << "\">" << escape(s) << "</a>";
 			else
-				os << s;
+				os << " class=\"tablecell_" << class_types[type] << "\">" << escape(s);
 			os << "</td>\n";	
 		}
 						
@@ -236,9 +301,8 @@
 		{
 			ostringstream ss;
 			
-			marker(_os, si._name);
-			sub_title(_os, "Suite: " + si._name, 3);
-			table_header(_os);
+			sub_title(_os, "Suite: " + si._name, 3, si._name);
+			table_header(_os, TableClass_Suite, "Details for suite " + si._name);
 			  table_tr_header(_os);
 			    table_entry(_os, Title, "Name");
 			    table_entry(_os, Title, "Errors", 10);
@@ -264,7 +328,7 @@
 			
 			ostringstream ss;
 			
-			table_header(_os);
+			table_header(_os, TableClass_Result, "Test Failure");
 			  table_tr_header(_os);
 				table_entry(_os, Title, "Test", TitleSize);
 				table_entry(_os, Success, s.suite() + "::" + s.test());
@@ -279,7 +343,6 @@
 				table_entry(_os, Success, s.message());
 			  table_tr_footer(_os);
 			table_footer(_os);
-			_os << "<br>\n";
 		}
 	};
 	
@@ -295,7 +358,7 @@
 			{
 				const string& suite = ti._sources.front().suite();
 				
-				marker(_os, suite + "_" + ti._name);
+				sub_title(_os, suite + "::" + ti._name, 3, suite + "_" + ti._name);
 				for_each(ti._sources.begin(), ti._sources.end(), TestResult(_os));
 				back_ref(_os, suite, false);
 			}
@@ -333,7 +396,7 @@
 		// Table: Summary
 		//
 		sub_title(os, "Summary", 2);
-		table_header(os);
+		table_header(os, TableClass_Summary, "Summary of test results");
 		  table_tr_header(os);
 		    table_entry(os, Title, "Tests", 30);
 		    table_entry(os, Title, "Errors", 30);
@@ -351,12 +414,12 @@
 		    table_entry(os, type, ss.str(), 10);
 		  table_tr_footer(os);
 		table_footer(os);
-		os << "<hr>\n\n";
+		os << "<hr />\n\n";
 		
 		// Table: Test suites
 		//
 		sub_title(os, "Test suites", 2);
-		table_header(os);
+		table_header(os, TableClass_Suites, "Test Suites");
 		  table_tr_header(os);
 		    table_entry(os, Title, "Name");
 		    table_entry(os, Title, "Tests",   10);
@@ -366,19 +429,21 @@
 		  table_tr_footer(os);
 		  for_each(_suites.begin(), _suites.end(), SuiteRow(os));
 		table_footer(os);
-		os << "<hr>\n\n";
+		os << "<hr />\n\n";
 		
 		// Individual tests tables
 		//
 		for_each(_suites.begin(), _suites.end(), TestSuiteRow(os, incl_ok_tests));
-		os << "<hr>\n\n";
+		os << "<hr />\n\n";
 		
 		// Individual tests result tables
 		//
-		sub_title(os, "Test results", 2);
-		for_each(_suites.begin(), _suites.end(), SuiteTestResult(os));
-		os << "<hr>\n\n";
-		
+		if(_total_errors != 0)
+		{
+			sub_title(os, "Test results", 2);
+			for_each(_suites.begin(), _suites.end(), SuiteTestResult(os));
+			os << "<hr />\n\n";
+		}		
 		// EOF
 		//
 		footer(os);
diff -Nru /tmp/bxdedfLB6u/uriparser-0.6.0/test/CppTest/missing.cpp /tmp/fLjZ2dz9P3/uriparser-0.7.4/test/CppTest/missing.cpp
--- uriparser-0.6.0/test/CppTest/missing.cpp	2007-07-06 00:25:45.000000000 +0100
+++ uriparser-0.7.4/test/CppTest/missing.cpp	2008-12-20 18:52:46.000000000 +0000
@@ -1,6 +1,6 @@
 // ---
 //
-// $Id: missing.cpp,v 1.2 2004/02/04 21:08:23 nilu Exp $
+// $Id: missing.cpp,v 1.4 2008/07/15 20:33:31 hartwork Exp $
 //
 // CppTest - A C++ Unit Testing Framework
 // Copyright (c) 2003 Niklas Lundell
@@ -28,7 +28,8 @@
 # include "winconfig.h"
 #else
 # include "config.h"
-#endif
+#endif 
+
 #include "missing.h"
 
 #ifdef HAVE_GETTICKCOUNT
diff -Nru /tmp/bxdedfLB6u/uriparser-0.6.0/test/CppTest/missing.h /tmp/fLjZ2dz9P3/uriparser-0.7.4/test/CppTest/missing.h
--- uriparser-0.6.0/test/CppTest/missing.h	2007-07-06 00:25:45.000000000 +0100
+++ uriparser-0.7.4/test/CppTest/missing.h	2008-12-20 18:52:46.000000000 +0000
@@ -1,6 +1,6 @@
 // ---
 //
-// $Id: missing.h,v 1.2 2004/02/04 21:08:23 nilu Exp $
+// $Id: missing.h,v 1.4 2008/07/15 20:33:31 hartwork Exp $
 //
 // CppTest - A C++ Unit Testing Framework
 // Copyright (c) 2003 Niklas Lundell
@@ -31,7 +31,7 @@
 # include "winconfig.h"
 #else
 # include "config.h"
-#endif
+#endif 
 
 namespace Test
 {
diff -Nru /tmp/bxdedfLB6u/uriparser-0.6.0/test/CppTest/source.cpp /tmp/fLjZ2dz9P3/uriparser-0.7.4/test/CppTest/source.cpp
--- uriparser-0.6.0/test/CppTest/source.cpp	2007-07-06 00:25:45.000000000 +0100
+++ uriparser-0.7.4/test/CppTest/source.cpp	2008-12-20 18:52:46.000000000 +0000
@@ -1,6 +1,6 @@
 // ---
 //
-// $Id: source.cpp,v 1.2 2004/02/04 21:08:23 nilu Exp $
+// $Id: source.cpp,v 1.4 2005/06/08 09:25:09 nilu Exp $
 //
 // CppTest - A C++ Unit Testing Framework
 // Copyright (c) 2003 Niklas Lundell
@@ -39,7 +39,7 @@
 	
 	/// Constructs a source object.
 	///
-	///	\param file Name of the file containing the failing function.
+	/// \param file Name of the file containing the failing function.
 	/// \param line Line where the function starts.
 	/// \param msg  Expression (or message) that caused the failure.
 	///
@@ -50,7 +50,7 @@
 	{}
 	
 	/// \return Name of the file containing the failing function.
-	//
+	///
 	const string&
 	Source::file() const 	
 	{
diff -Nru /tmp/bxdedfLB6u/uriparser-0.6.0/test/CppTest/suite.cpp /tmp/fLjZ2dz9P3/uriparser-0.7.4/test/CppTest/suite.cpp
--- uriparser-0.6.0/test/CppTest/suite.cpp	2007-07-06 00:25:45.000000000 +0100
+++ uriparser-0.7.4/test/CppTest/suite.cpp	2008-12-20 18:52:46.000000000 +0000
@@ -1,6 +1,6 @@
 // ---
 //
-// $Id: suite.cpp,v 1.2 2004/02/04 21:08:23 nilu Exp $
+// $Id: suite.cpp,v 1.6 2008/07/15 20:33:31 hartwork Exp $
 //
 // CppTest - A C++ Unit Testing Framework
 // Copyright (c) 2003 Niklas Lundell
@@ -34,7 +34,8 @@
 # include "winconfig.h"
 #else
 # include "config.h"
-#endif
+#endif 
+
 #include "cpptest-output.h"
 #include "cpptest-source.h"
 #include "cpptest-suite.h"
@@ -172,7 +173,13 @@
 			
 			_suite.setup();
 			Time start(Time::current());
-			(_suite.*data._func)();
+			// FIXME Also feedback exception to user
+			try
+			{
+				(_suite.*data._func)();
+			} catch (...) {
+				_suite._result = false;
+			}
 			Time end(Time::current());
 			_suite.tear_down();
 			
@@ -206,20 +213,19 @@
 
 		for_each(_suites.begin(), _suites.end(), DoRun(_output, _continue));
 
-		// BEGIN workaround
+		// FIXME Find a cleaner way
 		Suites::const_iterator iter = _suites.begin();
 		while (iter != _suites.end())
 		{
-				if (!(*iter)->_success)
-				{
-						_success = false;
-						break;
-				}
-				iter++;
+			if (!(*iter)->_success)
+			{
+				_success = false;
+				break;
+			}
+			iter++;
 		}
-		// END
 	}
-	
+
 	// Functor to count all tests in a suite.
 	//
 	struct Suite::SubSuiteTests
diff -Nru /tmp/bxdedfLB6u/uriparser-0.6.0/test/CppTest/textoutput.cpp /tmp/fLjZ2dz9P3/uriparser-0.7.4/test/CppTest/textoutput.cpp
--- uriparser-0.6.0/test/CppTest/textoutput.cpp	2007-07-06 00:25:45.000000000 +0100
+++ uriparser-0.7.4/test/CppTest/textoutput.cpp	2008-12-20 18:52:46.000000000 +0000
@@ -1,6 +1,6 @@
 // ---
 //
-// $Id: textoutput.cpp,v 1.2 2004/02/04 21:08:23 nilu Exp $
+// $Id: textoutput.cpp,v 1.4 2008/07/15 20:33:31 hartwork Exp $
 //
 // CppTest - A C++ Unit Testing Framework
 // Copyright (c) 2003 Niklas Lundell
@@ -30,7 +30,8 @@
 # include "winconfig.h"
 #else
 # include "config.h"
-#endif
+#endif 
+
 #include "cpptest-textoutput.h"
 #include "cpptest-time.h"
 #include "utils.h"
diff -Nru /tmp/bxdedfLB6u/uriparser-0.6.0/test/CppTest/time.cpp /tmp/fLjZ2dz9P3/uriparser-0.7.4/test/CppTest/time.cpp
--- uriparser-0.6.0/test/CppTest/time.cpp	2007-07-06 00:25:45.000000000 +0100
+++ uriparser-0.7.4/test/CppTest/time.cpp	2008-12-20 18:52:46.000000000 +0000
@@ -1,6 +1,6 @@
 // ---
 //
-// $Id: time.cpp,v 1.2 2004/02/04 21:08:23 nilu Exp $
+// $Id: time.cpp,v 1.4 2008/07/15 20:33:31 hartwork Exp $
 //
 // CppTest - A C++ Unit Testing Framework
 // Copyright (c) 2003 Niklas Lundell
@@ -28,7 +28,8 @@
 # include "winconfig.h"
 #else
 # include "config.h"
-#endif
+#endif 
+
 #include "missing.h"
 #include "cpptest-time.h"
 
diff -Nru /tmp/bxdedfLB6u/uriparser-0.6.0/test/CppTest/utils.cpp /tmp/fLjZ2dz9P3/uriparser-0.7.4/test/CppTest/utils.cpp
--- uriparser-0.6.0/test/CppTest/utils.cpp	2007-07-06 00:25:45.000000000 +0100
+++ uriparser-0.7.4/test/CppTest/utils.cpp	2008-12-20 18:52:46.000000000 +0000
@@ -1,6 +1,6 @@
 // ---
 //
-// $Id: utils.cpp,v 1.2 2004/02/04 21:08:23 nilu Exp $
+// $Id: utils.cpp,v 1.5 2008/07/15 20:33:31 hartwork Exp $
 //
 // CppTest - A C++ Unit Testing Framework
 // Copyright (c) 2003 Niklas Lundell
@@ -29,15 +29,11 @@
 # include "winconfig.h"
 #else
 # include "config.h"
-#endif
+#endif 
+
 #include "missing.h"
 #include "utils.h"
 
-#ifdef HAVE_ROUND
-	#include <cmath>
-	using namespace std;
-#endif
-
 namespace Test
 {	
 	// Computes the procentage of correct tests.
@@ -45,8 +41,10 @@
 	int
 	correct(int tests, int errors)
 	{
-		return static_cast<int>(
-			round((static_cast<double>(tests - errors) / tests) * 100.0));
+		if ((errors == 0) || (tests == 0))
+			return 100;
+
+		return (tests - errors) * 100 / tests;
 	}
 
 } // namespace Test
diff -Nru /tmp/bxdedfLB6u/uriparser-0.6.0/test/CppTest/utils.h /tmp/fLjZ2dz9P3/uriparser-0.7.4/test/CppTest/utils.h
--- uriparser-0.6.0/test/CppTest/utils.h	2007-07-06 00:25:45.000000000 +0100
+++ uriparser-0.7.4/test/CppTest/utils.h	2008-12-20 18:52:46.000000000 +0000
@@ -1,6 +1,6 @@
 // ---
 //
-// $Id: utils.h,v 1.2 2004/02/04 21:08:23 nilu Exp $
+// $Id: utils.h,v 1.3 2005/06/08 08:08:06 nilu Exp $
 //
 // CppTest - A C++ Unit Testing Framework
 // Copyright (c) 2003 Niklas Lundell
diff -Nru /tmp/bxdedfLB6u/uriparser-0.6.0/test/CppTest/winconfig.h /tmp/fLjZ2dz9P3/uriparser-0.7.4/test/CppTest/winconfig.h
--- uriparser-0.6.0/test/CppTest/winconfig.h	2007-07-06 00:25:45.000000000 +0100
+++ uriparser-0.7.4/test/CppTest/winconfig.h	2008-12-20 18:52:46.000000000 +0000
@@ -1,6 +1,6 @@
 // ---
 //
-// $Id: config.h,v 1.2 2004/02/04 21:08:23 nilu Exp $
+// $Id: winconfig.h,v 1.1 2008/07/15 20:33:31 hartwork Exp $
 //
 // CppTest - A C++ Unit Testing Framework
 // Copyright (c) 2003 Niklas Lundell
diff -Nru /tmp/bxdedfLB6u/uriparser-0.6.0/test/FourSuite.cpp /tmp/fLjZ2dz9P3/uriparser-0.7.4/test/FourSuite.cpp
--- uriparser-0.6.0/test/FourSuite.cpp	2007-09-12 18:53:22.000000000 +0100
+++ uriparser-0.7.4/test/FourSuite.cpp	2008-12-21 04:21:15.000000000 +0000
@@ -1,601 +1,611 @@
-/*
- * uriparser - RFC 3986 URI parsing library
- *
- * Copyright (C) 2007, Weijia Song <songweijia@gmail.com>
- * Copyright (C) 2007, Sebastian Pipping <webmaster@hartwork.org>
- *
- * This library is free software; you can redistribute it and/or
- * modify it under the terms of the GNU Lesser General Public
- * License as published by the Free Software Foundation; either
- * version 2.1 of the License, or (at your option) any later version.
- *
- * This library is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * Lesser General Public License for more details.
- *
- * You should have received a copy of the GNU Lesser General Public
- * License along with this library; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301  USA
- */
-
-#include "FourSuite.h"
-#include <uriparser/Uri.h>
-
-
-
-// All testcases in this file are coming from
-// http://cvs.4suite.org/viewcvs/4Suite/test/Lib/test_uri.py
-
-
-
-bool FourSuite::testAddOrRemoveBaseHelper(const char * ref, const char * base,
-	const char * expected, bool add, bool domainRootMode) {
-	UriParserStateA stateA;
-
-	// Base
-	UriUriA baseUri;
-	stateA.uri = &baseUri;
-	int res = uriParseUriA(&stateA, base);
-	if (res != 0) {
-		return false;
-	}
-
-	// Rel
-	UriUriA relUri;
-	stateA.uri = &relUri;
-	res = uriParseUriA(&stateA, ref);
-	if (res != 0) {
-		uriFreeUriMembersA(&baseUri);
-		return false;
-	}
-
-	// Expected result
-	UriUriA expectedUri;
-	stateA.uri = &expectedUri;
-	res = uriParseUriA(&stateA, expected);
-	if (res != 0) {
-		uriFreeUriMembersA(&baseUri);
-		uriFreeUriMembersA(&relUri);
-		return false;
-	}
-
-	// Transform
-	UriUriA transformedUri;
-	if (add) {
-		res = uriAddBaseUriA(&transformedUri, &relUri, &baseUri);
-	} else {
-		res = uriRemoveBaseUriA(&transformedUri, &relUri, &baseUri,
-				domainRootMode ? URI_TRUE : URI_FALSE);
-	}
-	if (res != 0) {
-		uriFreeUriMembersA(&baseUri);
-		uriFreeUriMembersA(&relUri);
-		return false;
-	}
-
-	const bool equal = (URI_TRUE == uriEqualsUriA(&transformedUri, &expectedUri));
-	if (!equal) {
-		char transformedUriText[1024 * 8];
-		char expectedUriText[1024 * 8];
-		uriToStringA(transformedUriText, &transformedUri, 1024 * 8, NULL);
-		uriToStringA(expectedUriText, &expectedUri, 1024 * 8, NULL);
-		printf("\n\n\nExpected: \"%s\"\nReceived: \"%s\"\n\n\n", expectedUriText, transformedUriText);
-	}
-
-	uriFreeUriMembersA(&baseUri);
-	uriFreeUriMembersA(&relUri);
-	uriFreeUriMembersA(&expectedUri);
-	return equal;
-}
-
-
-
-void FourSuite::absolutize_test_cases() {
-	char * BASE_URI[] = {
-			"http://a/b/c/d;p?q",
-			"http://a/b/c/d;p?q=1/2",
-			"http://a/b/c/d;p=1/2?q",
-			"fred:///s//a/b/c",
-			"http:///s//a/b/c"};
-
-	// ref, base, exptected
-
-	// http://lists.w3.org/Archives/Public/uri/2004Feb/0114.html
-	TEST_ASSERT(testAddOrRemoveBaseHelper("../c", "foo:a/b", "foo:c"));
-	TEST_ASSERT(testAddOrRemoveBaseHelper("foo:.", "foo:a", "foo:"));
-	TEST_ASSERT(testAddOrRemoveBaseHelper("/foo/../../../bar", "zz:abc", "zz:/bar"));
-	TEST_ASSERT(testAddOrRemoveBaseHelper("/foo/../bar", "zz:abc", "zz:/bar"));
-	TEST_ASSERT(testAddOrRemoveBaseHelper("foo/../../../bar", "zz:abc", "zz:bar"));
-	TEST_ASSERT(testAddOrRemoveBaseHelper("foo/../bar", "zz:abc", "zz:bar"));
-	TEST_ASSERT(testAddOrRemoveBaseHelper("zz:.", "zz:abc", "zz:"));
-	TEST_ASSERT(testAddOrRemoveBaseHelper("/.", BASE_URI[0], "http://a/"));
-	TEST_ASSERT(testAddOrRemoveBaseHelper("/.foo", BASE_URI[0], "http://a/.foo"));
-	TEST_ASSERT(testAddOrRemoveBaseHelper(".foo", BASE_URI[0], "http://a/b/c/.foo"));
-
-	// http://gbiv.com/protocols/uri/test/rel_examples1.html
-	// examples from RFC 2396
-	TEST_ASSERT(testAddOrRemoveBaseHelper("g:h", BASE_URI[0], "g:h"));
-	TEST_ASSERT(testAddOrRemoveBaseHelper("g", BASE_URI[0], "http://a/b/c/g"));
-	TEST_ASSERT(testAddOrRemoveBaseHelper("./g", BASE_URI[0], "http://a/b/c/g"));
-	TEST_ASSERT(testAddOrRemoveBaseHelper("g/", BASE_URI[0], "http://a/b/c/g/"));
-	TEST_ASSERT(testAddOrRemoveBaseHelper("/g", BASE_URI[0], "http://a/g"));
-	TEST_ASSERT(testAddOrRemoveBaseHelper("//g", BASE_URI[0], "http://g"));
-
-	// changed with RFC 2396bis
-	TEST_ASSERT(testAddOrRemoveBaseHelper("?y", BASE_URI[0], "http://a/b/c/d;p?y"));
-	TEST_ASSERT(testAddOrRemoveBaseHelper("g?y", BASE_URI[0], "http://a/b/c/g?y"));
-
-	// changed with RFC 2396bis
-	TEST_ASSERT(testAddOrRemoveBaseHelper("#s", BASE_URI[0], "http://a/b/c/d;p?q#s"));
-	TEST_ASSERT(testAddOrRemoveBaseHelper("g#s", BASE_URI[0], "http://a/b/c/g#s"));
-	TEST_ASSERT(testAddOrRemoveBaseHelper("g?y#s", BASE_URI[0], "http://a/b/c/g?y#s"));
-	TEST_ASSERT(testAddOrRemoveBaseHelper(";x", BASE_URI[0], "http://a/b/c/;x"));
-	TEST_ASSERT(testAddOrRemoveBaseHelper("g;x", BASE_URI[0], "http://a/b/c/g;x"));
-	TEST_ASSERT(testAddOrRemoveBaseHelper("g;x?y#s", BASE_URI[0], "http://a/b/c/g;x?y#s"));
-
-	// changed with RFC 2396bis
-	TEST_ASSERT(testAddOrRemoveBaseHelper("", BASE_URI[0], "http://a/b/c/d;p?q"));
-	TEST_ASSERT(testAddOrRemoveBaseHelper(".", BASE_URI[0], "http://a/b/c/"));
-	TEST_ASSERT(testAddOrRemoveBaseHelper("./", BASE_URI[0], "http://a/b/c/"));
-	TEST_ASSERT(testAddOrRemoveBaseHelper("..", BASE_URI[0], "http://a/b/"));
-	TEST_ASSERT(testAddOrRemoveBaseHelper("../", BASE_URI[0], "http://a/b/"));
-	TEST_ASSERT(testAddOrRemoveBaseHelper("../g", BASE_URI[0], "http://a/b/g"));
-	TEST_ASSERT(testAddOrRemoveBaseHelper("../..", BASE_URI[0], "http://a/"));
-	TEST_ASSERT(testAddOrRemoveBaseHelper("../../", BASE_URI[0], "http://a/"));
-	TEST_ASSERT(testAddOrRemoveBaseHelper("../../g", BASE_URI[0], "http://a/g"));
-	TEST_ASSERT(testAddOrRemoveBaseHelper("../../../g", BASE_URI[0], "http://a/g")); // http://a/../g
-	TEST_ASSERT(testAddOrRemoveBaseHelper("../../../../g", BASE_URI[0], "http://a/g")); // http://a/../../g
-
-	// changed with RFC 2396bis
-	TEST_ASSERT(testAddOrRemoveBaseHelper("/./g", BASE_URI[0], "http://a/g"));
-
-	// changed with RFC 2396bis
-	TEST_ASSERT(testAddOrRemoveBaseHelper("/../g", BASE_URI[0], "http://a/g"));
-	TEST_ASSERT(testAddOrRemoveBaseHelper("g.", BASE_URI[0], "http://a/b/c/g."));
-	TEST_ASSERT(testAddOrRemoveBaseHelper(".g", BASE_URI[0], "http://a/b/c/.g"));
-	TEST_ASSERT(testAddOrRemoveBaseHelper("g..", BASE_URI[0], "http://a/b/c/g.."));
-	TEST_ASSERT(testAddOrRemoveBaseHelper("..g", BASE_URI[0], "http://a/b/c/..g"));
-	TEST_ASSERT(testAddOrRemoveBaseHelper("./../g", BASE_URI[0], "http://a/b/g"));
-	TEST_ASSERT(testAddOrRemoveBaseHelper("./g/.", BASE_URI[0], "http://a/b/c/g/"));
-	TEST_ASSERT(testAddOrRemoveBaseHelper("g/./h", BASE_URI[0], "http://a/b/c/g/h"));
-	TEST_ASSERT(testAddOrRemoveBaseHelper("g/../h", BASE_URI[0], "http://a/b/c/h"));
-	TEST_ASSERT(testAddOrRemoveBaseHelper("g;x=1/./y", BASE_URI[0], "http://a/b/c/g;x=1/y"));
-	TEST_ASSERT(testAddOrRemoveBaseHelper("g;x=1/../y", BASE_URI[0], "http://a/b/c/y"));
-	TEST_ASSERT(testAddOrRemoveBaseHelper("g?y/./x", BASE_URI[0], "http://a/b/c/g?y/./x"));
-	TEST_ASSERT(testAddOrRemoveBaseHelper("g?y/../x", BASE_URI[0], "http://a/b/c/g?y/../x"));
-	TEST_ASSERT(testAddOrRemoveBaseHelper("g#s/./x", BASE_URI[0], "http://a/b/c/g#s/./x"));
-	TEST_ASSERT(testAddOrRemoveBaseHelper("g#s/../x", BASE_URI[0], "http://a/b/c/g#s/../x"));
-	TEST_ASSERT(testAddOrRemoveBaseHelper("http:g", BASE_URI[0], "http:g")); // http://a/b/c/g
-	TEST_ASSERT(testAddOrRemoveBaseHelper("http:", BASE_URI[0], "http:")); // BASE_URI[0]
-
-	// not sure where this one originated
-	TEST_ASSERT(testAddOrRemoveBaseHelper("/a/b/c/./../../g", BASE_URI[0], "http://a/a/g"));
-
-	// http://gbiv.com/protocols/uri/test/rel_examples2.html
-	// slashes in base URI's query args
-	TEST_ASSERT(testAddOrRemoveBaseHelper("g", BASE_URI[1], "http://a/b/c/g"));
-	TEST_ASSERT(testAddOrRemoveBaseHelper("./g", BASE_URI[1], "http://a/b/c/g"));
-	TEST_ASSERT(testAddOrRemoveBaseHelper("g/", BASE_URI[1], "http://a/b/c/g/"));
-	TEST_ASSERT(testAddOrRemoveBaseHelper("/g", BASE_URI[1], "http://a/g"));
-	TEST_ASSERT(testAddOrRemoveBaseHelper("//g", BASE_URI[1], "http://g"));
-
-	// changed in RFC 2396bis
-	// TEST_ASSERT(testAddOrRemoveBaseHelper("?y", BASE_URI[1], "http://a/b/c/?y"));
-	TEST_ASSERT(testAddOrRemoveBaseHelper("?y", BASE_URI[1], "http://a/b/c/d;p?y"));
-	TEST_ASSERT(testAddOrRemoveBaseHelper("g?y", BASE_URI[1], "http://a/b/c/g?y"));
-	TEST_ASSERT(testAddOrRemoveBaseHelper("g?y/./x", BASE_URI[1], "http://a/b/c/g?y/./x"));
-	TEST_ASSERT(testAddOrRemoveBaseHelper("g?y/../x", BASE_URI[1], "http://a/b/c/g?y/../x"));
-	TEST_ASSERT(testAddOrRemoveBaseHelper("g#s", BASE_URI[1], "http://a/b/c/g#s"));
-	TEST_ASSERT(testAddOrRemoveBaseHelper("g#s/./x", BASE_URI[1], "http://a/b/c/g#s/./x"));
-	TEST_ASSERT(testAddOrRemoveBaseHelper("g#s/../x", BASE_URI[1], "http://a/b/c/g#s/../x"));
-	TEST_ASSERT(testAddOrRemoveBaseHelper("./", BASE_URI[1], "http://a/b/c/"));
-	TEST_ASSERT(testAddOrRemoveBaseHelper("../", BASE_URI[1], "http://a/b/"));
-	TEST_ASSERT(testAddOrRemoveBaseHelper("../g", BASE_URI[1], "http://a/b/g"));
-	TEST_ASSERT(testAddOrRemoveBaseHelper("../../", BASE_URI[1], "http://a/"));
-	TEST_ASSERT(testAddOrRemoveBaseHelper("../../g", BASE_URI[1], "http://a/g"));
-
-	// http://gbiv.com/protocols/uri/test/rel_examples3.html
-	// slashes in path params
-	// all of these changed in RFC 2396bis
-	TEST_ASSERT(testAddOrRemoveBaseHelper("g", BASE_URI[2], "http://a/b/c/d;p=1/g"));
-	TEST_ASSERT(testAddOrRemoveBaseHelper("./g", BASE_URI[2], "http://a/b/c/d;p=1/g"));
-	TEST_ASSERT(testAddOrRemoveBaseHelper("g/", BASE_URI[2], "http://a/b/c/d;p=1/g/"));
-	TEST_ASSERT(testAddOrRemoveBaseHelper("g?y", BASE_URI[2], "http://a/b/c/d;p=1/g?y"));
-	TEST_ASSERT(testAddOrRemoveBaseHelper(";x", BASE_URI[2], "http://a/b/c/d;p=1/;x"));
-	TEST_ASSERT(testAddOrRemoveBaseHelper("g;x", BASE_URI[2], "http://a/b/c/d;p=1/g;x"));
-	TEST_ASSERT(testAddOrRemoveBaseHelper("g;x=1/./y", BASE_URI[2], "http://a/b/c/d;p=1/g;x=1/y"));
-	TEST_ASSERT(testAddOrRemoveBaseHelper("g;x=1/../y", BASE_URI[2], "http://a/b/c/d;p=1/y"));
-	TEST_ASSERT(testAddOrRemoveBaseHelper("./", BASE_URI[2], "http://a/b/c/d;p=1/"));
-	TEST_ASSERT(testAddOrRemoveBaseHelper("../", BASE_URI[2], "http://a/b/c/"));
-	TEST_ASSERT(testAddOrRemoveBaseHelper("../g", BASE_URI[2], "http://a/b/c/g"));
-	TEST_ASSERT(testAddOrRemoveBaseHelper("../../", BASE_URI[2], "http://a/b/"));
-	TEST_ASSERT(testAddOrRemoveBaseHelper("../../g", BASE_URI[2], "http://a/b/g"));
-
-	// http://gbiv.com/protocols/uri/test/rel_examples4.html
-	// double and triple slash, unknown scheme
-	TEST_ASSERT(testAddOrRemoveBaseHelper("g:h", BASE_URI[3], "g:h"));
-	TEST_ASSERT(testAddOrRemoveBaseHelper("g", BASE_URI[3], "fred:///s//a/b/g"));
-	TEST_ASSERT(testAddOrRemoveBaseHelper("./g", BASE_URI[3], "fred:///s//a/b/g"));
-	TEST_ASSERT(testAddOrRemoveBaseHelper("g/", BASE_URI[3], "fred:///s//a/b/g/"));
-	TEST_ASSERT(testAddOrRemoveBaseHelper("/g", BASE_URI[3], "fred:///g")); // may change to fred:///s//a/g
-	TEST_ASSERT(testAddOrRemoveBaseHelper("//g", BASE_URI[3], "fred://g")); // may change to fred:///s//g
-	TEST_ASSERT(testAddOrRemoveBaseHelper("//g/x", BASE_URI[3], "fred://g/x")); // may change to fred:///s//g/x
-	TEST_ASSERT(testAddOrRemoveBaseHelper("///g", BASE_URI[3], "fred:///g"));
-	TEST_ASSERT(testAddOrRemoveBaseHelper("./", BASE_URI[3], "fred:///s//a/b/"));
-	TEST_ASSERT(testAddOrRemoveBaseHelper("../", BASE_URI[3], "fred:///s//a/"));
-	TEST_ASSERT(testAddOrRemoveBaseHelper("../g", BASE_URI[3], "fred:///s//a/g"));
-	TEST_ASSERT(testAddOrRemoveBaseHelper("../../", BASE_URI[3], "fred:///s//")); // may change to fred:///s//a/../
-	TEST_ASSERT(testAddOrRemoveBaseHelper("../../g", BASE_URI[3], "fred:///s//g")); // may change to fred:///s//a/../g
-	TEST_ASSERT(testAddOrRemoveBaseHelper("../../../g", BASE_URI[3], "fred:///s/g")); // may change to fred:///s//a/../../g
-	TEST_ASSERT(testAddOrRemoveBaseHelper("../../../../g", BASE_URI[3], "fred:///g")); // may change to fred:///s//a/../../../g
-
-	// http://gbiv.com/protocols/uri/test/rel_examples5.html
-	// double and triple slash, well-known scheme
-	TEST_ASSERT(testAddOrRemoveBaseHelper("g:h", BASE_URI[4], "g:h"));
-	TEST_ASSERT(testAddOrRemoveBaseHelper("g", BASE_URI[4], "http:///s//a/b/g"));
-	TEST_ASSERT(testAddOrRemoveBaseHelper("./g", BASE_URI[4], "http:///s//a/b/g"));
-	TEST_ASSERT(testAddOrRemoveBaseHelper("g/", BASE_URI[4], "http:///s//a/b/g/"));
-	TEST_ASSERT(testAddOrRemoveBaseHelper("/g", BASE_URI[4], "http:///g")); // may change to http:///s//a/g
-	TEST_ASSERT(testAddOrRemoveBaseHelper("//g", BASE_URI[4], "http://g")); // may change to http:///s//g
-	TEST_ASSERT(testAddOrRemoveBaseHelper("//g/x", BASE_URI[4], "http://g/x")); // may change to http:///s//g/x
-	TEST_ASSERT(testAddOrRemoveBaseHelper("///g", BASE_URI[4], "http:///g"));
-	TEST_ASSERT(testAddOrRemoveBaseHelper("./", BASE_URI[4], "http:///s//a/b/"));
-	TEST_ASSERT(testAddOrRemoveBaseHelper("../", BASE_URI[4], "http:///s//a/"));
-	TEST_ASSERT(testAddOrRemoveBaseHelper("../g", BASE_URI[4], "http:///s//a/g"));
-	TEST_ASSERT(testAddOrRemoveBaseHelper("../../", BASE_URI[4], "http:///s//")); // may change to http:///s//a/../
-	TEST_ASSERT(testAddOrRemoveBaseHelper("../../g", BASE_URI[4], "http:///s//g")); // may change to http:///s//a/../g
-	TEST_ASSERT(testAddOrRemoveBaseHelper("../../../g", BASE_URI[4], "http:///s/g")); // may change to http:///s//a/../../g
-	TEST_ASSERT(testAddOrRemoveBaseHelper("../../../../g", BASE_URI[4], "http:///g")); // may change to http:///s//a/../../../g
-
-	// from Dan Connelly's tests in http://www.w3.org/2000/10/swap/uripath.py
-	TEST_ASSERT(testAddOrRemoveBaseHelper("bar:abc", "foo:xyz", "bar:abc"));
-	TEST_ASSERT(testAddOrRemoveBaseHelper("../abc", "http://example/x/y/z", "http://example/x/abc"));
-	TEST_ASSERT(testAddOrRemoveBaseHelper("http://example/x/abc", "http://example2/x/y/z", "http://example/x/abc"));
-	TEST_ASSERT(testAddOrRemoveBaseHelper("../r", "http://ex/x/y/z", "http://ex/x/r"));
-	TEST_ASSERT(testAddOrRemoveBaseHelper("q/r", "http://ex/x/y", "http://ex/x/q/r"));
-	TEST_ASSERT(testAddOrRemoveBaseHelper("q/r#s", "http://ex/x/y", "http://ex/x/q/r#s"));
-	TEST_ASSERT(testAddOrRemoveBaseHelper("q/r#s/t", "http://ex/x/y", "http://ex/x/q/r#s/t"));
-	TEST_ASSERT(testAddOrRemoveBaseHelper("ftp://ex/x/q/r", "http://ex/x/y", "ftp://ex/x/q/r"));
-	TEST_ASSERT(testAddOrRemoveBaseHelper("", "http://ex/x/y", "http://ex/x/y"));
-	TEST_ASSERT(testAddOrRemoveBaseHelper("", "http://ex/x/y/", "http://ex/x/y/"));
-	TEST_ASSERT(testAddOrRemoveBaseHelper("", "http://ex/x/y/pdq", "http://ex/x/y/pdq"));
-	TEST_ASSERT(testAddOrRemoveBaseHelper("z/", "http://ex/x/y/", "http://ex/x/y/z/"));
-	TEST_ASSERT(testAddOrRemoveBaseHelper("#Animal", "file:/swap/test/animal.rdf", "file:/swap/test/animal.rdf#Animal"));
-	TEST_ASSERT(testAddOrRemoveBaseHelper("../abc", "file:/e/x/y/z", "file:/e/x/abc"));
-	TEST_ASSERT(testAddOrRemoveBaseHelper("/example/x/abc", "file:/example2/x/y/z", "file:/example/x/abc"));
-	TEST_ASSERT(testAddOrRemoveBaseHelper("../r", "file:/ex/x/y/z", "file:/ex/x/r"));
-	TEST_ASSERT(testAddOrRemoveBaseHelper("/r", "file:/ex/x/y/z", "file:/r"));
-	TEST_ASSERT(testAddOrRemoveBaseHelper("q/r", "file:/ex/x/y", "file:/ex/x/q/r"));
-	TEST_ASSERT(testAddOrRemoveBaseHelper("q/r#s", "file:/ex/x/y", "file:/ex/x/q/r#s"));
-	TEST_ASSERT(testAddOrRemoveBaseHelper("q/r#", "file:/ex/x/y", "file:/ex/x/q/r#"));
-	TEST_ASSERT(testAddOrRemoveBaseHelper("q/r#s/t", "file:/ex/x/y", "file:/ex/x/q/r#s/t"));
-	TEST_ASSERT(testAddOrRemoveBaseHelper("ftp://ex/x/q/r", "file:/ex/x/y", "ftp://ex/x/q/r"));
-	TEST_ASSERT(testAddOrRemoveBaseHelper("", "file:/ex/x/y", "file:/ex/x/y"));
-	TEST_ASSERT(testAddOrRemoveBaseHelper("", "file:/ex/x/y/", "file:/ex/x/y/"));
-	TEST_ASSERT(testAddOrRemoveBaseHelper("", "file:/ex/x/y/pdq", "file:/ex/x/y/pdq"));
-	TEST_ASSERT(testAddOrRemoveBaseHelper("z/", "file:/ex/x/y/", "file:/ex/x/y/z/"));
-	TEST_ASSERT(testAddOrRemoveBaseHelper("file://meetings.example.com/cal#m1", "file:/devel/WWW/2000/10/swap/test/reluri-1.n3", "file://meetings.example.com/cal#m1"));
-	TEST_ASSERT(testAddOrRemoveBaseHelper("file://meetings.example.com/cal#m1", "file:/home/connolly/w3ccvs/WWW/2000/10/swap/test/reluri-1.n3", "file://meetings.example.com/cal#m1"));
-	TEST_ASSERT(testAddOrRemoveBaseHelper("./#blort", "file:/some/dir/foo", "file:/some/dir/#blort"));
-	TEST_ASSERT(testAddOrRemoveBaseHelper("./#", "file:/some/dir/foo", "file:/some/dir/#"));
-
-	// Ryan Lee
-	TEST_ASSERT(testAddOrRemoveBaseHelper("./", "http://example/x/abc.efg", "http://example/x/"));
-
-	// Graham Klyne's tests
-	// http://www.ninebynine.org/Software/HaskellUtils/Network/UriTest.xls
-	// 01-31 are from Connelly's cases
-
-	// 32-49
-	TEST_ASSERT(testAddOrRemoveBaseHelper("./q:r", "http://ex/x/y", "http://ex/x/q:r"));
-	TEST_ASSERT(testAddOrRemoveBaseHelper("./p=q:r", "http://ex/x/y", "http://ex/x/p=q:r"));
-	TEST_ASSERT(testAddOrRemoveBaseHelper("?pp/rr", "http://ex/x/y?pp/qq", "http://ex/x/y?pp/rr"));
-	TEST_ASSERT(testAddOrRemoveBaseHelper("y/z", "http://ex/x/y?pp/qq", "http://ex/x/y/z"));
-	TEST_ASSERT(testAddOrRemoveBaseHelper("local/qual@domain.org#frag", "mailto:local", "mailto:local/qual@domain.org#frag"));
-	TEST_ASSERT(testAddOrRemoveBaseHelper("more/qual2@domain2.org#frag", "mailto:local/qual1@domain1.org", "mailto:local/more/qual2@domain2.org#frag"));
-	TEST_ASSERT(testAddOrRemoveBaseHelper("y?q", "http://ex/x/y?q", "http://ex/x/y?q"));
-	TEST_ASSERT(testAddOrRemoveBaseHelper("/x/y?q", "http://ex?p", "http://ex/x/y?q"));
-	TEST_ASSERT(testAddOrRemoveBaseHelper("c/d", "foo:a/b", "foo:a/c/d"));
-	TEST_ASSERT(testAddOrRemoveBaseHelper("/c/d", "foo:a/b", "foo:/c/d"));
-	TEST_ASSERT(testAddOrRemoveBaseHelper("", "foo:a/b?c#d", "foo:a/b?c"));
-	TEST_ASSERT(testAddOrRemoveBaseHelper("b/c", "foo:a", "foo:b/c"));
-	TEST_ASSERT(testAddOrRemoveBaseHelper("../b/c", "foo:/a/y/z", "foo:/a/b/c"));
-	TEST_ASSERT(testAddOrRemoveBaseHelper("./b/c", "foo:a", "foo:b/c"));
-	TEST_ASSERT(testAddOrRemoveBaseHelper("/./b/c", "foo:a", "foo:/b/c"));
-	TEST_ASSERT(testAddOrRemoveBaseHelper("../../d", "foo://a//b/c", "foo://a/d"));
-	TEST_ASSERT(testAddOrRemoveBaseHelper(".", "foo:a", "foo:"));
-	TEST_ASSERT(testAddOrRemoveBaseHelper("..", "foo:a", "foo:"));
-
-	// 50-57 (cf. TimBL comments --
-	// http://lists.w3.org/Archives/Public/uri/2003Feb/0028.html,
-	// http://lists.w3.org/Archives/Public/uri/2003Jan/0008.html)
-	TEST_ASSERT(testAddOrRemoveBaseHelper("abc", "http://example/x/y%2Fz", "http://example/x/abc"));
-	TEST_ASSERT(testAddOrRemoveBaseHelper("../../x%2Fabc", "http://example/a/x/y/z", "http://example/a/x%2Fabc"));
-	TEST_ASSERT(testAddOrRemoveBaseHelper("../x%2Fabc", "http://example/a/x/y%2Fz", "http://example/a/x%2Fabc"));
-	TEST_ASSERT(testAddOrRemoveBaseHelper("abc", "http://example/x%2Fy/z", "http://example/x%2Fy/abc"));
-	TEST_ASSERT(testAddOrRemoveBaseHelper("q%3Ar", "http://ex/x/y", "http://ex/x/q%3Ar"));
-	TEST_ASSERT(testAddOrRemoveBaseHelper("/x%2Fabc", "http://example/x/y%2Fz", "http://example/x%2Fabc"));
-	TEST_ASSERT(testAddOrRemoveBaseHelper("/x%2Fabc", "http://example/x/y/z", "http://example/x%2Fabc"));
-	TEST_ASSERT(testAddOrRemoveBaseHelper("/x%2Fabc", "http://example/x/y%2Fz", "http://example/x%2Fabc"));
-
-	// 70-77
-	TEST_ASSERT(testAddOrRemoveBaseHelper("local2@domain2", "mailto:local1@domain1?query1", "mailto:local2@domain2"));
-	TEST_ASSERT(testAddOrRemoveBaseHelper("local2@domain2?query2", "mailto:local1@domain1", "mailto:local2@domain2?query2"));
-	TEST_ASSERT(testAddOrRemoveBaseHelper("local2@domain2?query2", "mailto:local1@domain1?query1", "mailto:local2@domain2?query2"));
-	TEST_ASSERT(testAddOrRemoveBaseHelper("?query2", "mailto:local@domain?query1", "mailto:local@domain?query2"));
-	TEST_ASSERT(testAddOrRemoveBaseHelper("local@domain?query2", "mailto:?query1", "mailto:local@domain?query2"));
-	TEST_ASSERT(testAddOrRemoveBaseHelper("?query2", "mailto:local@domain?query1", "mailto:local@domain?query2"));
-	TEST_ASSERT(testAddOrRemoveBaseHelper("http://example/a/b?c/../d", "foo:bar", "http://example/a/b?c/../d"));
-	TEST_ASSERT(testAddOrRemoveBaseHelper("http://example/a/b#c/../d", "foo:bar", "http://example/a/b#c/../d"));
-
-	// 82-88
-	TEST_ASSERT(testAddOrRemoveBaseHelper("http:this", "http://example.org/base/uri", "http:this"));
-	TEST_ASSERT(testAddOrRemoveBaseHelper("http:this", "http:base", "http:this"));
-	// TODO Whole in the URI spec, see http://lists.w3.org/Archives/Public/uri/2007Aug/0003.html
-	// TEST_ASSERT(testAddOrRemoveBaseHelper(".//g", "f:/a", "f://g")); // ORIGINAL
-	TEST_ASSERT(testAddOrRemoveBaseHelper(".//g", "f:/a", "f:/.//g")); // FIXED ONE
-	TEST_ASSERT(testAddOrRemoveBaseHelper("b/c//d/e", "f://example.org/base/a", "f://example.org/base/b/c//d/e"));
-	TEST_ASSERT(testAddOrRemoveBaseHelper("m2@example.ord/c2@example.org", "mid:m@example.ord/c@example.org", "mid:m@example.ord/m2@example.ord/c2@example.org"));
-	TEST_ASSERT(testAddOrRemoveBaseHelper("mini1.xml", "file:///C:/DEV/Haskell/lib/HXmlToolbox-3.01/examples/", "file:///C:/DEV/Haskell/lib/HXmlToolbox-3.01/examples/mini1.xml"));
-	TEST_ASSERT(testAddOrRemoveBaseHelper("../b/c", "foo:a/y/z", "foo:a/b/c"));
-}
-
-
-
-void FourSuite::relativize_test_cases() {
-	const bool REMOVE_MODE = false;
-	const bool DOMAIN_ROOT_MODE = true;
-
-	// to convert, base, exptected
-
-	TEST_ASSERT(testAddOrRemoveBaseHelper("s://ex/a/b/c", "s://ex/a/d", "b/c", REMOVE_MODE));
-	TEST_ASSERT(testAddOrRemoveBaseHelper("s://ex/b/b/c", "s://ex/a/d", "/b/b/c", REMOVE_MODE, DOMAIN_ROOT_MODE));
-	TEST_ASSERT(testAddOrRemoveBaseHelper("s://ex/a/b/c", "s://ex/a/b/", "c", REMOVE_MODE));
-	TEST_ASSERT(testAddOrRemoveBaseHelper("s://other.ex/a/b/", "s://ex/a/d", "//other.ex/a/b/", REMOVE_MODE));
-	TEST_ASSERT(testAddOrRemoveBaseHelper("s://ex/a/b/c", "s://other.ex/a/d", "//ex/a/b/c", REMOVE_MODE));
-	TEST_ASSERT(testAddOrRemoveBaseHelper("t://ex/a/b/c", "s://ex/a/d", "t://ex/a/b/c", REMOVE_MODE));
-	TEST_ASSERT(testAddOrRemoveBaseHelper("s://ex/a/b/c", "t://ex/a/d", "s://ex/a/b/c", REMOVE_MODE));
-	TEST_ASSERT(testAddOrRemoveBaseHelper("s://ex/a", "s://ex/b/c/d", "/a", REMOVE_MODE, DOMAIN_ROOT_MODE));
-	TEST_ASSERT(testAddOrRemoveBaseHelper("s://ex/b/c/d", "s://ex/a", "b/c/d", REMOVE_MODE));
-	TEST_ASSERT(testAddOrRemoveBaseHelper("s://ex/a/b/c?h", "s://ex/a/d?w", "b/c?h", REMOVE_MODE));
-	TEST_ASSERT(testAddOrRemoveBaseHelper("s://ex/a/b/c#h", "s://ex/a/d#w", "b/c#h", REMOVE_MODE));
-	TEST_ASSERT(testAddOrRemoveBaseHelper("s://ex/a/b/c?h#i", "s://ex/a/d?w#j", "b/c?h#i", REMOVE_MODE));
-	TEST_ASSERT(testAddOrRemoveBaseHelper("s://ex/a#i", "s://ex/a", "#i", REMOVE_MODE));
-	TEST_ASSERT(testAddOrRemoveBaseHelper("s://ex/a?i", "s://ex/a", "?i", REMOVE_MODE));
-
-	TEST_ASSERT(testAddOrRemoveBaseHelper("s://ex/a/b/", "s://ex/a/b/", "", REMOVE_MODE));
-	TEST_ASSERT(testAddOrRemoveBaseHelper("s://ex/a/b", "s://ex/a/b", "", REMOVE_MODE));
-	TEST_ASSERT(testAddOrRemoveBaseHelper("s://ex/", "s://ex/", "", REMOVE_MODE));
-
-	TEST_ASSERT(testAddOrRemoveBaseHelper("s://ex/a/b/c", "s://ex/a/d/c", "../b/c", REMOVE_MODE));
-	TEST_ASSERT(testAddOrRemoveBaseHelper("s://ex/a/b/c/", "s://ex/a/d/c", "../b/c/", REMOVE_MODE));
-	TEST_ASSERT(testAddOrRemoveBaseHelper("s://ex/a/b/c/d", "s://ex/a/d/c/d", "../../b/c/d", REMOVE_MODE));
-	TEST_ASSERT(testAddOrRemoveBaseHelper("s://ex/a/b/c", "s://ex/d/e/f", "/a/b/c", REMOVE_MODE, DOMAIN_ROOT_MODE));
-	TEST_ASSERT(testAddOrRemoveBaseHelper("s://ex/a/b/", "s://ex/a/c/d/e", "../../b/", REMOVE_MODE));
-
-	// Some tests to ensure that empty path segments don't cause problems.
-	TEST_ASSERT(testAddOrRemoveBaseHelper("s://ex/a/b", "s://ex/a//b/c", "../../b", REMOVE_MODE));
-	TEST_ASSERT(testAddOrRemoveBaseHelper("s://ex/a///b", "s://ex/a/", ".///b", REMOVE_MODE));
-	TEST_ASSERT(testAddOrRemoveBaseHelper("s://ex/a/", "s://ex/a///b", "../../", REMOVE_MODE));
-	TEST_ASSERT(testAddOrRemoveBaseHelper("s://ex/a//b/c", "s://ex/a/b", ".//b/c", REMOVE_MODE));
-}
-
-
-
-int FourSuite::testParseUri(const char * uriText) {
-	UriParserStateA state;
-	UriUriA uri;
-	state.uri = &uri;
-	int res = uriParseUriA(&state, uriText);
-	uriFreeUriMembersA(&uri);
-	return res;
-}
-
-
-
-bool FourSuite::testGoodUri(const char * uriText) {
-	return (testParseUri(uriText) == 0);
-}
-
-
-
-bool FourSuite::testBadUri(const char * uriText) {
-	return (testParseUri(uriText) == URI_ERROR_SYNTAX);
-}
-
-
-
-void FourSuite::good_URI_references() {
-	TEST_ASSERT(testGoodUri("file:///foo/bar"));
-	TEST_ASSERT(testGoodUri("mailto:user@host?subject=blah"));
-	TEST_ASSERT(testGoodUri("dav:")); // empty opaque part / rel-path allowed by RFC 2396bis
-	TEST_ASSERT(testGoodUri("about:")); // empty opaque part / rel-path allowed by RFC 2396bis
-
-	// the following test cases are from a Perl script by David A. Wheeler
-	// at http://www.dwheeler.com/secure-programs/url.pl
-	TEST_ASSERT(testGoodUri("http://www.yahoo.com"));
-	TEST_ASSERT(testGoodUri("http://www.yahoo.com/"));
-	TEST_ASSERT(testGoodUri("http://1.2.3.4/"));
-	TEST_ASSERT(testGoodUri("http://www.yahoo.com/stuff"));
-	TEST_ASSERT(testGoodUri("http://www.yahoo.com/stuff/"));
-	TEST_ASSERT(testGoodUri("http://www.yahoo.com/hello%20world/"));
-	TEST_ASSERT(testGoodUri("http://www.yahoo.com?name=obi"));
-	TEST_ASSERT(testGoodUri("http://www.yahoo.com?name=obi+wan&status=jedi"));
-	TEST_ASSERT(testGoodUri("http://www.yahoo.com?onery"));
-	TEST_ASSERT(testGoodUri("http://www.yahoo.com#bottom"));
-	TEST_ASSERT(testGoodUri("http://www.yahoo.com/yelp.html#bottom"));
-	TEST_ASSERT(testGoodUri("https://www.yahoo.com/"));
-	TEST_ASSERT(testGoodUri("ftp://www.yahoo.com/"));
-	TEST_ASSERT(testGoodUri("ftp://www.yahoo.com/hello"));
-	TEST_ASSERT(testGoodUri("demo.txt"));
-	TEST_ASSERT(testGoodUri("demo/hello.txt"));
-	TEST_ASSERT(testGoodUri("demo/hello.txt?query=hello#fragment"));
-	TEST_ASSERT(testGoodUri("/cgi-bin/query?query=hello#fragment"));
-	TEST_ASSERT(testGoodUri("/demo.txt"));
-	TEST_ASSERT(testGoodUri("/hello/demo.txt"));
-	TEST_ASSERT(testGoodUri("hello/demo.txt"));
-	TEST_ASSERT(testGoodUri("/"));
-	TEST_ASSERT(testGoodUri(""));
-	TEST_ASSERT(testGoodUri("#"));
-	TEST_ASSERT(testGoodUri("#here"));
-
-	// Wheeler's script says these are invalid, but they aren't
-	TEST_ASSERT(testGoodUri("http://www.yahoo.com?name=%00%01"));
-	TEST_ASSERT(testGoodUri("http://www.yaho%6f.com"));
-	TEST_ASSERT(testGoodUri("http://www.yahoo.com/hello%00world/"));
-	TEST_ASSERT(testGoodUri("http://www.yahoo.com/hello+world/"));
-	TEST_ASSERT(testGoodUri("http://www.yahoo.com?name=obi&"));
-	TEST_ASSERT(testGoodUri("http://www.yahoo.com?name=obi&type="));
-	TEST_ASSERT(testGoodUri("http://www.yahoo.com/yelp.html#"));
-	TEST_ASSERT(testGoodUri("//"));
-
-	// the following test cases are from a Haskell program by Graham Klyne
-	// at http://www.ninebynine.org/Software/HaskellUtils/Network/URITest.hs
-	TEST_ASSERT(testGoodUri("http://example.org/aaa/bbb#ccc"));
-	TEST_ASSERT(testGoodUri("mailto:local@domain.org"));
-	TEST_ASSERT(testGoodUri("mailto:local@domain.org#frag"));
-	TEST_ASSERT(testGoodUri("HTTP://EXAMPLE.ORG/AAA/BBB#CCC"));
-	TEST_ASSERT(testGoodUri("//example.org/aaa/bbb#ccc"));
-	TEST_ASSERT(testGoodUri("/aaa/bbb#ccc"));
-	TEST_ASSERT(testGoodUri("bbb#ccc"));
-	TEST_ASSERT(testGoodUri("#ccc"));
-	TEST_ASSERT(testGoodUri("#"));
-	TEST_ASSERT(testGoodUri("A'C"));
-
-	// escapes
-	TEST_ASSERT(testGoodUri("http://example.org/aaa%2fbbb#ccc"));
-	TEST_ASSERT(testGoodUri("http://example.org/aaa%2Fbbb#ccc"));
-	TEST_ASSERT(testGoodUri("%2F"));
-	TEST_ASSERT(testGoodUri("aaa%2Fbbb"));
-
-	// ports
-	TEST_ASSERT(testGoodUri("http://example.org:80/aaa/bbb#ccc"));
-	TEST_ASSERT(testGoodUri("http://example.org:/aaa/bbb#ccc"));
-	TEST_ASSERT(testGoodUri("http://example.org./aaa/bbb#ccc"));
-	TEST_ASSERT(testGoodUri("http://example.123./aaa/bbb#ccc"));
-
-	// bare authority
-	TEST_ASSERT(testGoodUri("http://example.org"));
-
-	// IPv6 literals (from RFC2732):
-	TEST_ASSERT(testGoodUri("http://[FEDC:BA98:7654:3210:FEDC:BA98:7654:3210]:80/index.html"));
-	TEST_ASSERT(testGoodUri("http://[1080:0:0:0:8:800:200C:417A]/index.html"));
-	TEST_ASSERT(testGoodUri("http://[3ffe:2a00:100:7031::1]"));
-	TEST_ASSERT(testGoodUri("http://[1080::8:800:200C:417A]/foo"));
-	TEST_ASSERT(testGoodUri("http://[::192.9.5.5]/ipng"));
-	TEST_ASSERT(testGoodUri("http://[::FFFF:129.144.52.38]:80/index.html"));
-	TEST_ASSERT(testGoodUri("http://[2010:836B:4179::836B:4179]"));
-	TEST_ASSERT(testGoodUri("//[2010:836B:4179::836B:4179]"));
-
-	// Random other things that crop up
-	TEST_ASSERT(testGoodUri("http://example/Andr&#567;"));
-	TEST_ASSERT(testGoodUri("file:///C:/DEV/Haskell/lib/HXmlToolbox-3.01/examples/"));
-}
-
-
-
-void FourSuite::bad_URI_references() {
-	TEST_ASSERT(testBadUri("beepbeep\x07\x07"));
-	TEST_ASSERT(testBadUri("\n"));
-	TEST_ASSERT(testBadUri("::")); // not OK, per Roy Fielding on the W3C uri list on 2004-04-01
-
-	// the following test cases are from a Perl script by David A. Wheeler
-	// at http://www.dwheeler.com/secure-programs/url.pl
-	TEST_ASSERT(testBadUri("http://www yahoo.com"));
-	TEST_ASSERT(testBadUri("http://www.yahoo.com/hello world/"));
-	TEST_ASSERT(testBadUri("http://www.yahoo.com/yelp.html#\""));
-
-	// the following test cases are from a Haskell program by Graham Klyne
-	// at http://www.ninebynine.org/Software/HaskellUtils/Network/URITest.hs
-	TEST_ASSERT(testBadUri("[2010:836B:4179::836B:4179]"));
-	TEST_ASSERT(testBadUri(" "));
-	TEST_ASSERT(testBadUri("%"));
-	TEST_ASSERT(testBadUri("A%Z"));
-	TEST_ASSERT(testBadUri("%ZZ"));
-	TEST_ASSERT(testBadUri("%AZ"));
-	TEST_ASSERT(testBadUri("A C"));
-	TEST_ASSERT(testBadUri("A\\'C")); // r"A\'C"
-	TEST_ASSERT(testBadUri("A`C"));
-	TEST_ASSERT(testBadUri("A<C"));
-	TEST_ASSERT(testBadUri("A>C"));
-	TEST_ASSERT(testBadUri("A^C"));
-	TEST_ASSERT(testBadUri("A\\\\C")); // r'A\\C'
-	TEST_ASSERT(testBadUri("A{C"));
-	TEST_ASSERT(testBadUri("A|C"));
-	TEST_ASSERT(testBadUri("A}C"));
-	TEST_ASSERT(testBadUri("A[C"));
-	TEST_ASSERT(testBadUri("A]C"));
-	TEST_ASSERT(testBadUri("A[**]C"));
-	TEST_ASSERT(testBadUri("http://[xyz]/"));
-	TEST_ASSERT(testBadUri("http://]/"));
-	TEST_ASSERT(testBadUri("http://example.org/[2010:836B:4179::836B:4179]"));
-	TEST_ASSERT(testBadUri("http://example.org/abc#[2010:836B:4179::836B:4179]"));
-	TEST_ASSERT(testBadUri("http://example.org/xxx/[qwerty]#a[b]"));
-
-	// from a post to the W3C uri list on 2004-02-17
-	TEST_ASSERT(testBadUri("http://w3c.org:80path1/path2"));
-}
-
-
-
-bool FourSuite::normalizeAndCompare(const char * uriText,
-		const char * expectedNormalized) {
-	UriParserStateA stateA;
-	int res;
-
-	UriUriA testUri;
-	stateA.uri = &testUri;
-	res = uriParseUriA(&stateA, uriText);
-	if (res != 0) {
-		uriFreeUriMembersA(&testUri);
-		return false;
-	}
-
-	// Expected result
-	UriUriA expectedUri;
-	stateA.uri = &expectedUri;
-	res = uriParseUriA(&stateA, expectedNormalized);
-	if (res != 0) {
-		uriFreeUriMembersA(&testUri);
-		uriFreeUriMembersA(&expectedUri);
-		return false;
-	}
-
-	res = uriNormalizeSyntaxA(&testUri);
-	if (res != 0) {
-		uriFreeUriMembersA(&testUri);
-		uriFreeUriMembersA(&expectedUri);
-		return false;
-	}
-
-	const bool equalAfter = (URI_TRUE == uriEqualsUriA(&testUri, &expectedUri));
-	uriFreeUriMembersA(&testUri);
-	uriFreeUriMembersA(&expectedUri);
-	return equalAfter;
-}
-
-
-
-void FourSuite::caseNormalizationTests() {
-	TEST_ASSERT(normalizeAndCompare("HTTP://www.EXAMPLE.com/", "http://www.example.com/"));
-	TEST_ASSERT(normalizeAndCompare("example://A/b/c/%7bfoo%7d", "example://a/b/c/%7Bfoo%7D"));
-}
-
-
-
-void FourSuite::pctEncNormalizationTests() {
-	TEST_ASSERT(normalizeAndCompare("http://host/%7Euser/x/y/z", "http://host/~user/x/y/z"));
-	TEST_ASSERT(normalizeAndCompare("http://host/%7euser/x/y/z", "http://host/~user/x/y/z"));
-}
-
-
-
-void FourSuite::pathSegmentNormalizationTests() {
-	TEST_ASSERT(normalizeAndCompare("/a/b/../../c", "/c"));
-	TEST_ASSERT(normalizeAndCompare("a/b/../../c", "a/b/../../c"));
-	TEST_ASSERT(normalizeAndCompare("/a/b/././c", "/a/b/c"));
-	TEST_ASSERT(normalizeAndCompare("a/b/././c", "a/b/././c"));
-	TEST_ASSERT(normalizeAndCompare("/a/b/../c/././d", "/a/c/d"));
-	TEST_ASSERT(normalizeAndCompare("a/b/../c/././d", "a/b/../c/././d"));
-}
+/*
+ * uriparser - RFC 3986 URI parsing library
+ *
+ * Copyright (C) 2007, Weijia Song <songweijia@gmail.com>
+ * Copyright (C) 2007, Sebastian Pipping <webmaster@hartwork.org>
+ *
+ * This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public
+ * License as published by the Free Software Foundation; either
+ * version 2.1 of the License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public
+ * License along with this library; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#include "FourSuite.h"
+#include <uriparser/Uri.h>
+
+
+
+// All testcases in this file are coming from
+// http://cvs.4suite.org/viewcvs/4Suite/test/Lib/test_uri.py
+
+
+
+bool FourSuite::testAddOrRemoveBaseHelper(const char * ref, const char * base,
+	const char * expected, bool add, bool domainRootMode) {
+	UriParserStateA stateA;
+
+	// Base
+	UriUriA baseUri;
+	stateA.uri = &baseUri;
+	int res = uriParseUriA(&stateA, base);
+	if (res != 0) {
+		return false;
+	}
+
+	// Rel
+	UriUriA relUri;
+	stateA.uri = &relUri;
+	res = uriParseUriA(&stateA, ref);
+	if (res != 0) {
+		uriFreeUriMembersA(&baseUri);
+		return false;
+	}
+
+	// Expected result
+	UriUriA expectedUri;
+	stateA.uri = &expectedUri;
+	res = uriParseUriA(&stateA, expected);
+	if (res != 0) {
+		uriFreeUriMembersA(&baseUri);
+		uriFreeUriMembersA(&relUri);
+		uriFreeUriMembersA(&expectedUri);
+		return false;
+	}
+
+	// Transform
+	UriUriA transformedUri;
+	if (add) {
+		res = uriAddBaseUriA(&transformedUri, &relUri, &baseUri);
+	} else {
+		res = uriRemoveBaseUriA(&transformedUri, &relUri, &baseUri,
+				domainRootMode ? URI_TRUE : URI_FALSE);
+	}
+	if (res != 0) {
+		uriFreeUriMembersA(&baseUri);
+		uriFreeUriMembersA(&relUri);
+		uriFreeUriMembersA(&expectedUri);
+		uriFreeUriMembersA(&transformedUri);
+		return false;
+	}
+
+	const bool equal = (URI_TRUE == uriEqualsUriA(&transformedUri, &expectedUri));
+	if (!equal) {
+		char transformedUriText[1024 * 8];
+		char expectedUriText[1024 * 8];
+		uriToStringA(transformedUriText, &transformedUri, 1024 * 8, NULL);
+		uriToStringA(expectedUriText, &expectedUri, 1024 * 8, NULL);
+		printf("\n\n\nExpected: \"%s\"\nReceived: \"%s\"\n\n\n", expectedUriText, transformedUriText);
+	}
+
+	uriFreeUriMembersA(&baseUri);
+	uriFreeUriMembersA(&relUri);
+	uriFreeUriMembersA(&expectedUri);
+	uriFreeUriMembersA(&transformedUri);
+	return equal;
+}
+
+
+
+void FourSuite::absolutize_test_cases() {
+	const char * const BASE_URI[] = {
+			"http://a/b/c/d;p?q",
+			"http://a/b/c/d;p?q=1/2",
+			"http://a/b/c/d;p=1/2?q",
+			"fred:///s//a/b/c",
+			"http:///s//a/b/c"};
+
+	// ref, base, exptected
+
+	// http://lists.w3.org/Archives/Public/uri/2004Feb/0114.html
+	TEST_ASSERT(testAddOrRemoveBaseHelper("../c", "foo:a/b", "foo:c"));
+	TEST_ASSERT(testAddOrRemoveBaseHelper("foo:.", "foo:a", "foo:"));
+	TEST_ASSERT(testAddOrRemoveBaseHelper("/foo/../../../bar", "zz:abc", "zz:/bar"));
+	TEST_ASSERT(testAddOrRemoveBaseHelper("/foo/../bar", "zz:abc", "zz:/bar"));
+	TEST_ASSERT(testAddOrRemoveBaseHelper("foo/../../../bar", "zz:abc", "zz:bar"));
+	TEST_ASSERT(testAddOrRemoveBaseHelper("foo/../bar", "zz:abc", "zz:bar"));
+	TEST_ASSERT(testAddOrRemoveBaseHelper("zz:.", "zz:abc", "zz:"));
+	TEST_ASSERT(testAddOrRemoveBaseHelper("/.", BASE_URI[0], "http://a/"));
+	TEST_ASSERT(testAddOrRemoveBaseHelper("/.foo", BASE_URI[0], "http://a/.foo"));
+	TEST_ASSERT(testAddOrRemoveBaseHelper(".foo", BASE_URI[0], "http://a/b/c/.foo"));
+
+	// http://gbiv.com/protocols/uri/test/rel_examples1.html
+	// examples from RFC 2396
+	TEST_ASSERT(testAddOrRemoveBaseHelper("g:h", BASE_URI[0], "g:h"));
+	TEST_ASSERT(testAddOrRemoveBaseHelper("g", BASE_URI[0], "http://a/b/c/g"));
+	TEST_ASSERT(testAddOrRemoveBaseHelper("./g", BASE_URI[0], "http://a/b/c/g"));
+	TEST_ASSERT(testAddOrRemoveBaseHelper("g/", BASE_URI[0], "http://a/b/c/g/"));
+	TEST_ASSERT(testAddOrRemoveBaseHelper("/g", BASE_URI[0], "http://a/g"));
+	TEST_ASSERT(testAddOrRemoveBaseHelper("//g", BASE_URI[0], "http://g"));
+
+	// changed with RFC 2396bis
+	TEST_ASSERT(testAddOrRemoveBaseHelper("?y", BASE_URI[0], "http://a/b/c/d;p?y"));
+	TEST_ASSERT(testAddOrRemoveBaseHelper("g?y", BASE_URI[0], "http://a/b/c/g?y"));
+
+	// changed with RFC 2396bis
+	TEST_ASSERT(testAddOrRemoveBaseHelper("#s", BASE_URI[0], "http://a/b/c/d;p?q#s"));
+	TEST_ASSERT(testAddOrRemoveBaseHelper("g#s", BASE_URI[0], "http://a/b/c/g#s"));
+	TEST_ASSERT(testAddOrRemoveBaseHelper("g?y#s", BASE_URI[0], "http://a/b/c/g?y#s"));
+	TEST_ASSERT(testAddOrRemoveBaseHelper(";x", BASE_URI[0], "http://a/b/c/;x"));
+	TEST_ASSERT(testAddOrRemoveBaseHelper("g;x", BASE_URI[0], "http://a/b/c/g;x"));
+	TEST_ASSERT(testAddOrRemoveBaseHelper("g;x?y#s", BASE_URI[0], "http://a/b/c/g;x?y#s"));
+
+	// changed with RFC 2396bis
+	TEST_ASSERT(testAddOrRemoveBaseHelper("", BASE_URI[0], "http://a/b/c/d;p?q"));
+	TEST_ASSERT(testAddOrRemoveBaseHelper(".", BASE_URI[0], "http://a/b/c/"));
+	TEST_ASSERT(testAddOrRemoveBaseHelper("./", BASE_URI[0], "http://a/b/c/"));
+	TEST_ASSERT(testAddOrRemoveBaseHelper("..", BASE_URI[0], "http://a/b/"));
+	TEST_ASSERT(testAddOrRemoveBaseHelper("../", BASE_URI[0], "http://a/b/"));
+	TEST_ASSERT(testAddOrRemoveBaseHelper("../g", BASE_URI[0], "http://a/b/g"));
+	TEST_ASSERT(testAddOrRemoveBaseHelper("../..", BASE_URI[0], "http://a/"));
+	TEST_ASSERT(testAddOrRemoveBaseHelper("../../", BASE_URI[0], "http://a/"));
+	TEST_ASSERT(testAddOrRemoveBaseHelper("../../g", BASE_URI[0], "http://a/g"));
+	TEST_ASSERT(testAddOrRemoveBaseHelper("../../../g", BASE_URI[0], "http://a/g")); // http://a/../g
+	TEST_ASSERT(testAddOrRemoveBaseHelper("../../../../g", BASE_URI[0], "http://a/g")); // http://a/../../g
+
+	// changed with RFC 2396bis
+	TEST_ASSERT(testAddOrRemoveBaseHelper("/./g", BASE_URI[0], "http://a/g"));
+
+	// changed with RFC 2396bis
+	TEST_ASSERT(testAddOrRemoveBaseHelper("/../g", BASE_URI[0], "http://a/g"));
+	TEST_ASSERT(testAddOrRemoveBaseHelper("g.", BASE_URI[0], "http://a/b/c/g."));
+	TEST_ASSERT(testAddOrRemoveBaseHelper(".g", BASE_URI[0], "http://a/b/c/.g"));
+	TEST_ASSERT(testAddOrRemoveBaseHelper("g..", BASE_URI[0], "http://a/b/c/g.."));
+	TEST_ASSERT(testAddOrRemoveBaseHelper("..g", BASE_URI[0], "http://a/b/c/..g"));
+	TEST_ASSERT(testAddOrRemoveBaseHelper("./../g", BASE_URI[0], "http://a/b/g"));
+	TEST_ASSERT(testAddOrRemoveBaseHelper("./g/.", BASE_URI[0], "http://a/b/c/g/"));
+	TEST_ASSERT(testAddOrRemoveBaseHelper("g/./h", BASE_URI[0], "http://a/b/c/g/h"));
+	TEST_ASSERT(testAddOrRemoveBaseHelper("g/../h", BASE_URI[0], "http://a/b/c/h"));
+	TEST_ASSERT(testAddOrRemoveBaseHelper("g;x=1/./y", BASE_URI[0], "http://a/b/c/g;x=1/y"));
+	TEST_ASSERT(testAddOrRemoveBaseHelper("g;x=1/../y", BASE_URI[0], "http://a/b/c/y"));
+	TEST_ASSERT(testAddOrRemoveBaseHelper("g?y/./x", BASE_URI[0], "http://a/b/c/g?y/./x"));
+	TEST_ASSERT(testAddOrRemoveBaseHelper("g?y/../x", BASE_URI[0], "http://a/b/c/g?y/../x"));
+	TEST_ASSERT(testAddOrRemoveBaseHelper("g#s/./x", BASE_URI[0], "http://a/b/c/g#s/./x"));
+	TEST_ASSERT(testAddOrRemoveBaseHelper("g#s/../x", BASE_URI[0], "http://a/b/c/g#s/../x"));
+	TEST_ASSERT(testAddOrRemoveBaseHelper("http:g", BASE_URI[0], "http:g")); // http://a/b/c/g
+	TEST_ASSERT(testAddOrRemoveBaseHelper("http:", BASE_URI[0], "http:")); // BASE_URI[0]
+
+	// not sure where this one originated
+	TEST_ASSERT(testAddOrRemoveBaseHelper("/a/b/c/./../../g", BASE_URI[0], "http://a/a/g"));
+
+	// http://gbiv.com/protocols/uri/test/rel_examples2.html
+	// slashes in base URI's query args
+	TEST_ASSERT(testAddOrRemoveBaseHelper("g", BASE_URI[1], "http://a/b/c/g"));
+	TEST_ASSERT(testAddOrRemoveBaseHelper("./g", BASE_URI[1], "http://a/b/c/g"));
+	TEST_ASSERT(testAddOrRemoveBaseHelper("g/", BASE_URI[1], "http://a/b/c/g/"));
+	TEST_ASSERT(testAddOrRemoveBaseHelper("/g", BASE_URI[1], "http://a/g"));
+	TEST_ASSERT(testAddOrRemoveBaseHelper("//g", BASE_URI[1], "http://g"));
+
+	// changed in RFC 2396bis
+	// TEST_ASSERT(testAddOrRemoveBaseHelper("?y", BASE_URI[1], "http://a/b/c/?y"));
+	TEST_ASSERT(testAddOrRemoveBaseHelper("?y", BASE_URI[1], "http://a/b/c/d;p?y"));
+	TEST_ASSERT(testAddOrRemoveBaseHelper("g?y", BASE_URI[1], "http://a/b/c/g?y"));
+	TEST_ASSERT(testAddOrRemoveBaseHelper("g?y/./x", BASE_URI[1], "http://a/b/c/g?y/./x"));
+	TEST_ASSERT(testAddOrRemoveBaseHelper("g?y/../x", BASE_URI[1], "http://a/b/c/g?y/../x"));
+	TEST_ASSERT(testAddOrRemoveBaseHelper("g#s", BASE_URI[1], "http://a/b/c/g#s"));
+	TEST_ASSERT(testAddOrRemoveBaseHelper("g#s/./x", BASE_URI[1], "http://a/b/c/g#s/./x"));
+	TEST_ASSERT(testAddOrRemoveBaseHelper("g#s/../x", BASE_URI[1], "http://a/b/c/g#s/../x"));
+	TEST_ASSERT(testAddOrRemoveBaseHelper("./", BASE_URI[1], "http://a/b/c/"));
+	TEST_ASSERT(testAddOrRemoveBaseHelper("../", BASE_URI[1], "http://a/b/"));
+	TEST_ASSERT(testAddOrRemoveBaseHelper("../g", BASE_URI[1], "http://a/b/g"));
+	TEST_ASSERT(testAddOrRemoveBaseHelper("../../", BASE_URI[1], "http://a/"));
+	TEST_ASSERT(testAddOrRemoveBaseHelper("../../g", BASE_URI[1], "http://a/g"));
+
+	// http://gbiv.com/protocols/uri/test/rel_examples3.html
+	// slashes in path params
+	// all of these changed in RFC 2396bis
+	TEST_ASSERT(testAddOrRemoveBaseHelper("g", BASE_URI[2], "http://a/b/c/d;p=1/g"));
+	TEST_ASSERT(testAddOrRemoveBaseHelper("./g", BASE_URI[2], "http://a/b/c/d;p=1/g"));
+	TEST_ASSERT(testAddOrRemoveBaseHelper("g/", BASE_URI[2], "http://a/b/c/d;p=1/g/"));
+	TEST_ASSERT(testAddOrRemoveBaseHelper("g?y", BASE_URI[2], "http://a/b/c/d;p=1/g?y"));
+	TEST_ASSERT(testAddOrRemoveBaseHelper(";x", BASE_URI[2], "http://a/b/c/d;p=1/;x"));
+	TEST_ASSERT(testAddOrRemoveBaseHelper("g;x", BASE_URI[2], "http://a/b/c/d;p=1/g;x"));
+	TEST_ASSERT(testAddOrRemoveBaseHelper("g;x=1/./y", BASE_URI[2], "http://a/b/c/d;p=1/g;x=1/y"));
+	TEST_ASSERT(testAddOrRemoveBaseHelper("g;x=1/../y", BASE_URI[2], "http://a/b/c/d;p=1/y"));
+	TEST_ASSERT(testAddOrRemoveBaseHelper("./", BASE_URI[2], "http://a/b/c/d;p=1/"));
+	TEST_ASSERT(testAddOrRemoveBaseHelper("../", BASE_URI[2], "http://a/b/c/"));
+	TEST_ASSERT(testAddOrRemoveBaseHelper("../g", BASE_URI[2], "http://a/b/c/g"));
+	TEST_ASSERT(testAddOrRemoveBaseHelper("../../", BASE_URI[2], "http://a/b/"));
+	TEST_ASSERT(testAddOrRemoveBaseHelper("../../g", BASE_URI[2], "http://a/b/g"));
+
+	// http://gbiv.com/protocols/uri/test/rel_examples4.html
+	// double and triple slash, unknown scheme
+	TEST_ASSERT(testAddOrRemoveBaseHelper("g:h", BASE_URI[3], "g:h"));
+	TEST_ASSERT(testAddOrRemoveBaseHelper("g", BASE_URI[3], "fred:///s//a/b/g"));
+	TEST_ASSERT(testAddOrRemoveBaseHelper("./g", BASE_URI[3], "fred:///s//a/b/g"));
+	TEST_ASSERT(testAddOrRemoveBaseHelper("g/", BASE_URI[3], "fred:///s//a/b/g/"));
+	TEST_ASSERT(testAddOrRemoveBaseHelper("/g", BASE_URI[3], "fred:///g")); // may change to fred:///s//a/g
+	TEST_ASSERT(testAddOrRemoveBaseHelper("//g", BASE_URI[3], "fred://g")); // may change to fred:///s//g
+	TEST_ASSERT(testAddOrRemoveBaseHelper("//g/x", BASE_URI[3], "fred://g/x")); // may change to fred:///s//g/x
+	TEST_ASSERT(testAddOrRemoveBaseHelper("///g", BASE_URI[3], "fred:///g"));
+	TEST_ASSERT(testAddOrRemoveBaseHelper("./", BASE_URI[3], "fred:///s//a/b/"));
+	TEST_ASSERT(testAddOrRemoveBaseHelper("../", BASE_URI[3], "fred:///s//a/"));
+	TEST_ASSERT(testAddOrRemoveBaseHelper("../g", BASE_URI[3], "fred:///s//a/g"));
+	TEST_ASSERT(testAddOrRemoveBaseHelper("../../", BASE_URI[3], "fred:///s//")); // may change to fred:///s//a/../
+	TEST_ASSERT(testAddOrRemoveBaseHelper("../../g", BASE_URI[3], "fred:///s//g")); // may change to fred:///s//a/../g
+	TEST_ASSERT(testAddOrRemoveBaseHelper("../../../g", BASE_URI[3], "fred:///s/g")); // may change to fred:///s//a/../../g
+	TEST_ASSERT(testAddOrRemoveBaseHelper("../../../../g", BASE_URI[3], "fred:///g")); // may change to fred:///s//a/../../../g
+
+	// http://gbiv.com/protocols/uri/test/rel_examples5.html
+	// double and triple slash, well-known scheme
+	TEST_ASSERT(testAddOrRemoveBaseHelper("g:h", BASE_URI[4], "g:h"));
+	TEST_ASSERT(testAddOrRemoveBaseHelper("g", BASE_URI[4], "http:///s//a/b/g"));
+	TEST_ASSERT(testAddOrRemoveBaseHelper("./g", BASE_URI[4], "http:///s//a/b/g"));
+	TEST_ASSERT(testAddOrRemoveBaseHelper("g/", BASE_URI[4], "http:///s//a/b/g/"));
+	TEST_ASSERT(testAddOrRemoveBaseHelper("/g", BASE_URI[4], "http:///g")); // may change to http:///s//a/g
+	TEST_ASSERT(testAddOrRemoveBaseHelper("//g", BASE_URI[4], "http://g")); // may change to http:///s//g
+	TEST_ASSERT(testAddOrRemoveBaseHelper("//g/x", BASE_URI[4], "http://g/x")); // may change to http:///s//g/x
+	TEST_ASSERT(testAddOrRemoveBaseHelper("///g", BASE_URI[4], "http:///g"));
+	TEST_ASSERT(testAddOrRemoveBaseHelper("./", BASE_URI[4], "http:///s//a/b/"));
+	TEST_ASSERT(testAddOrRemoveBaseHelper("../", BASE_URI[4], "http:///s//a/"));
+	TEST_ASSERT(testAddOrRemoveBaseHelper("../g", BASE_URI[4], "http:///s//a/g"));
+	TEST_ASSERT(testAddOrRemoveBaseHelper("../../", BASE_URI[4], "http:///s//")); // may change to http:///s//a/../
+	TEST_ASSERT(testAddOrRemoveBaseHelper("../../g", BASE_URI[4], "http:///s//g")); // may change to http:///s//a/../g
+	TEST_ASSERT(testAddOrRemoveBaseHelper("../../../g", BASE_URI[4], "http:///s/g")); // may change to http:///s//a/../../g
+	TEST_ASSERT(testAddOrRemoveBaseHelper("../../../../g", BASE_URI[4], "http:///g")); // may change to http:///s//a/../../../g
+
+	// from Dan Connelly's tests in http://www.w3.org/2000/10/swap/uripath.py
+	TEST_ASSERT(testAddOrRemoveBaseHelper("bar:abc", "foo:xyz", "bar:abc"));
+	TEST_ASSERT(testAddOrRemoveBaseHelper("../abc", "http://example/x/y/z", "http://example/x/abc"));
+	TEST_ASSERT(testAddOrRemoveBaseHelper("http://example/x/abc", "http://example2/x/y/z", "http://example/x/abc"));
+	TEST_ASSERT(testAddOrRemoveBaseHelper("../r", "http://ex/x/y/z", "http://ex/x/r"));
+	TEST_ASSERT(testAddOrRemoveBaseHelper("q/r", "http://ex/x/y", "http://ex/x/q/r"));
+	TEST_ASSERT(testAddOrRemoveBaseHelper("q/r#s", "http://ex/x/y", "http://ex/x/q/r#s"));
+	TEST_ASSERT(testAddOrRemoveBaseHelper("q/r#s/t", "http://ex/x/y", "http://ex/x/q/r#s/t"));
+	TEST_ASSERT(testAddOrRemoveBaseHelper("ftp://ex/x/q/r", "http://ex/x/y", "ftp://ex/x/q/r"));
+	TEST_ASSERT(testAddOrRemoveBaseHelper("", "http://ex/x/y", "http://ex/x/y"));
+	TEST_ASSERT(testAddOrRemoveBaseHelper("", "http://ex/x/y/", "http://ex/x/y/"));
+	TEST_ASSERT(testAddOrRemoveBaseHelper("", "http://ex/x/y/pdq", "http://ex/x/y/pdq"));
+	TEST_ASSERT(testAddOrRemoveBaseHelper("z/", "http://ex/x/y/", "http://ex/x/y/z/"));
+	TEST_ASSERT(testAddOrRemoveBaseHelper("#Animal", "file:/swap/test/animal.rdf", "file:/swap/test/animal.rdf#Animal"));
+	TEST_ASSERT(testAddOrRemoveBaseHelper("../abc", "file:/e/x/y/z", "file:/e/x/abc"));
+	TEST_ASSERT(testAddOrRemoveBaseHelper("/example/x/abc", "file:/example2/x/y/z", "file:/example/x/abc"));
+	TEST_ASSERT(testAddOrRemoveBaseHelper("../r", "file:/ex/x/y/z", "file:/ex/x/r"));
+	TEST_ASSERT(testAddOrRemoveBaseHelper("/r", "file:/ex/x/y/z", "file:/r"));
+	TEST_ASSERT(testAddOrRemoveBaseHelper("q/r", "file:/ex/x/y", "file:/ex/x/q/r"));
+	TEST_ASSERT(testAddOrRemoveBaseHelper("q/r#s", "file:/ex/x/y", "file:/ex/x/q/r#s"));
+	TEST_ASSERT(testAddOrRemoveBaseHelper("q/r#", "file:/ex/x/y", "file:/ex/x/q/r#"));
+	TEST_ASSERT(testAddOrRemoveBaseHelper("q/r#s/t", "file:/ex/x/y", "file:/ex/x/q/r#s/t"));
+	TEST_ASSERT(testAddOrRemoveBaseHelper("ftp://ex/x/q/r", "file:/ex/x/y", "ftp://ex/x/q/r"));
+	TEST_ASSERT(testAddOrRemoveBaseHelper("", "file:/ex/x/y", "file:/ex/x/y"));
+	TEST_ASSERT(testAddOrRemoveBaseHelper("", "file:/ex/x/y/", "file:/ex/x/y/"));
+	TEST_ASSERT(testAddOrRemoveBaseHelper("", "file:/ex/x/y/pdq", "file:/ex/x/y/pdq"));
+	TEST_ASSERT(testAddOrRemoveBaseHelper("z/", "file:/ex/x/y/", "file:/ex/x/y/z/"));
+	TEST_ASSERT(testAddOrRemoveBaseHelper("file://meetings.example.com/cal#m1", "file:/devel/WWW/2000/10/swap/test/reluri-1.n3", "file://meetings.example.com/cal#m1"));
+	TEST_ASSERT(testAddOrRemoveBaseHelper("file://meetings.example.com/cal#m1", "file:/home/connolly/w3ccvs/WWW/2000/10/swap/test/reluri-1.n3", "file://meetings.example.com/cal#m1"));
+	TEST_ASSERT(testAddOrRemoveBaseHelper("./#blort", "file:/some/dir/foo", "file:/some/dir/#blort"));
+	TEST_ASSERT(testAddOrRemoveBaseHelper("./#", "file:/some/dir/foo", "file:/some/dir/#"));
+
+	// Ryan Lee
+	TEST_ASSERT(testAddOrRemoveBaseHelper("./", "http://example/x/abc.efg", "http://example/x/"));
+
+	// Graham Klyne's tests
+	// http://www.ninebynine.org/Software/HaskellUtils/Network/UriTest.xls
+	// 01-31 are from Connelly's cases
+
+	// 32-49
+	TEST_ASSERT(testAddOrRemoveBaseHelper("./q:r", "http://ex/x/y", "http://ex/x/q:r"));
+	TEST_ASSERT(testAddOrRemoveBaseHelper("./p=q:r", "http://ex/x/y", "http://ex/x/p=q:r"));
+	TEST_ASSERT(testAddOrRemoveBaseHelper("?pp/rr", "http://ex/x/y?pp/qq", "http://ex/x/y?pp/rr"));
+	TEST_ASSERT(testAddOrRemoveBaseHelper("y/z", "http://ex/x/y?pp/qq", "http://ex/x/y/z"));
+	TEST_ASSERT(testAddOrRemoveBaseHelper("local/qual@domain.org#frag", "mailto:local", "mailto:local/qual@domain.org#frag"));
+	TEST_ASSERT(testAddOrRemoveBaseHelper("more/qual2@domain2.org#frag", "mailto:local/qual1@domain1.org", "mailto:local/more/qual2@domain2.org#frag"));
+	TEST_ASSERT(testAddOrRemoveBaseHelper("y?q", "http://ex/x/y?q", "http://ex/x/y?q"));
+	TEST_ASSERT(testAddOrRemoveBaseHelper("/x/y?q", "http://ex?p", "http://ex/x/y?q"));
+	TEST_ASSERT(testAddOrRemoveBaseHelper("c/d", "foo:a/b", "foo:a/c/d"));
+	TEST_ASSERT(testAddOrRemoveBaseHelper("/c/d", "foo:a/b", "foo:/c/d"));
+	TEST_ASSERT(testAddOrRemoveBaseHelper("", "foo:a/b?c#d", "foo:a/b?c"));
+	TEST_ASSERT(testAddOrRemoveBaseHelper("b/c", "foo:a", "foo:b/c"));
+	TEST_ASSERT(testAddOrRemoveBaseHelper("../b/c", "foo:/a/y/z", "foo:/a/b/c"));
+	TEST_ASSERT(testAddOrRemoveBaseHelper("./b/c", "foo:a", "foo:b/c"));
+	TEST_ASSERT(testAddOrRemoveBaseHelper("/./b/c", "foo:a", "foo:/b/c"));
+	TEST_ASSERT(testAddOrRemoveBaseHelper("../../d", "foo://a//b/c", "foo://a/d"));
+	TEST_ASSERT(testAddOrRemoveBaseHelper(".", "foo:a", "foo:"));
+	TEST_ASSERT(testAddOrRemoveBaseHelper("..", "foo:a", "foo:"));
+
+	// 50-57 (cf. TimBL comments --
+	// http://lists.w3.org/Archives/Public/uri/2003Feb/0028.html,
+	// http://lists.w3.org/Archives/Public/uri/2003Jan/0008.html)
+	TEST_ASSERT(testAddOrRemoveBaseHelper("abc", "http://example/x/y%2Fz", "http://example/x/abc"));
+	TEST_ASSERT(testAddOrRemoveBaseHelper("../../x%2Fabc", "http://example/a/x/y/z", "http://example/a/x%2Fabc"));
+	TEST_ASSERT(testAddOrRemoveBaseHelper("../x%2Fabc", "http://example/a/x/y%2Fz", "http://example/a/x%2Fabc"));
+	TEST_ASSERT(testAddOrRemoveBaseHelper("abc", "http://example/x%2Fy/z", "http://example/x%2Fy/abc"));
+	TEST_ASSERT(testAddOrRemoveBaseHelper("q%3Ar", "http://ex/x/y", "http://ex/x/q%3Ar"));
+	TEST_ASSERT(testAddOrRemoveBaseHelper("/x%2Fabc", "http://example/x/y%2Fz", "http://example/x%2Fabc"));
+	TEST_ASSERT(testAddOrRemoveBaseHelper("/x%2Fabc", "http://example/x/y/z", "http://example/x%2Fabc"));
+	TEST_ASSERT(testAddOrRemoveBaseHelper("/x%2Fabc", "http://example/x/y%2Fz", "http://example/x%2Fabc"));
+
+	// 70-77
+	TEST_ASSERT(testAddOrRemoveBaseHelper("local2@domain2", "mailto:local1@domain1?query1", "mailto:local2@domain2"));
+	TEST_ASSERT(testAddOrRemoveBaseHelper("local2@domain2?query2", "mailto:local1@domain1", "mailto:local2@domain2?query2"));
+	TEST_ASSERT(testAddOrRemoveBaseHelper("local2@domain2?query2", "mailto:local1@domain1?query1", "mailto:local2@domain2?query2"));
+	TEST_ASSERT(testAddOrRemoveBaseHelper("?query2", "mailto:local@domain?query1", "mailto:local@domain?query2"));
+	TEST_ASSERT(testAddOrRemoveBaseHelper("local@domain?query2", "mailto:?query1", "mailto:local@domain?query2"));
+	TEST_ASSERT(testAddOrRemoveBaseHelper("?query2", "mailto:local@domain?query1", "mailto:local@domain?query2"));
+	TEST_ASSERT(testAddOrRemoveBaseHelper("http://example/a/b?c/../d", "foo:bar", "http://example/a/b?c/../d"));
+	TEST_ASSERT(testAddOrRemoveBaseHelper("http://example/a/b#c/../d", "foo:bar", "http://example/a/b#c/../d"));
+
+	// 82-88
+	TEST_ASSERT(testAddOrRemoveBaseHelper("http:this", "http://example.org/base/uri", "http:this"));
+	TEST_ASSERT(testAddOrRemoveBaseHelper("http:this", "http:base", "http:this"));
+	// Whole in the URI spec, see http://lists.w3.org/Archives/Public/uri/2007Aug/0003.html
+	// TEST_ASSERT(testAddOrRemoveBaseHelper(".//g", "f:/a", "f://g")); // ORIGINAL
+	TEST_ASSERT(testAddOrRemoveBaseHelper(".//g", "f:/a", "f:/.//g")); // FIXED ONE
+	TEST_ASSERT(testAddOrRemoveBaseHelper("b/c//d/e", "f://example.org/base/a", "f://example.org/base/b/c//d/e"));
+	TEST_ASSERT(testAddOrRemoveBaseHelper("m2@example.ord/c2@example.org", "mid:m@example.ord/c@example.org", "mid:m@example.ord/m2@example.ord/c2@example.org"));
+	TEST_ASSERT(testAddOrRemoveBaseHelper("mini1.xml", "file:///C:/DEV/Haskell/lib/HXmlToolbox-3.01/examples/", "file:///C:/DEV/Haskell/lib/HXmlToolbox-3.01/examples/mini1.xml"));
+	TEST_ASSERT(testAddOrRemoveBaseHelper("../b/c", "foo:a/y/z", "foo:a/b/c"));
+}
+
+
+
+void FourSuite::relativize_test_cases() {
+	const bool REMOVE_MODE = false;
+	const bool DOMAIN_ROOT_MODE = true;
+
+	// to convert, base, exptected
+
+	TEST_ASSERT(testAddOrRemoveBaseHelper("s://ex/a/b/c", "s://ex/a/d", "b/c", REMOVE_MODE));
+	TEST_ASSERT(testAddOrRemoveBaseHelper("s://ex/b/b/c", "s://ex/a/d", "/b/b/c", REMOVE_MODE, DOMAIN_ROOT_MODE));
+	TEST_ASSERT(testAddOrRemoveBaseHelper("s://ex/a/b/c", "s://ex/a/b/", "c", REMOVE_MODE));
+	TEST_ASSERT(testAddOrRemoveBaseHelper("s://other.ex/a/b/", "s://ex/a/d", "//other.ex/a/b/", REMOVE_MODE));
+	TEST_ASSERT(testAddOrRemoveBaseHelper("s://ex/a/b/c", "s://other.ex/a/d", "//ex/a/b/c", REMOVE_MODE));
+	TEST_ASSERT(testAddOrRemoveBaseHelper("t://ex/a/b/c", "s://ex/a/d", "t://ex/a/b/c", REMOVE_MODE));
+	TEST_ASSERT(testAddOrRemoveBaseHelper("s://ex/a/b/c", "t://ex/a/d", "s://ex/a/b/c", REMOVE_MODE));
+	TEST_ASSERT(testAddOrRemoveBaseHelper("s://ex/a", "s://ex/b/c/d", "/a", REMOVE_MODE, DOMAIN_ROOT_MODE));
+	TEST_ASSERT(testAddOrRemoveBaseHelper("s://ex/b/c/d", "s://ex/a", "b/c/d", REMOVE_MODE));
+	TEST_ASSERT(testAddOrRemoveBaseHelper("s://ex/a/b/c?h", "s://ex/a/d?w", "b/c?h", REMOVE_MODE));
+	TEST_ASSERT(testAddOrRemoveBaseHelper("s://ex/a/b/c#h", "s://ex/a/d#w", "b/c#h", REMOVE_MODE));
+	TEST_ASSERT(testAddOrRemoveBaseHelper("s://ex/a/b/c?h#i", "s://ex/a/d?w#j", "b/c?h#i", REMOVE_MODE));
+	TEST_ASSERT(testAddOrRemoveBaseHelper("s://ex/a#i", "s://ex/a", "#i", REMOVE_MODE));
+	TEST_ASSERT(testAddOrRemoveBaseHelper("s://ex/a?i", "s://ex/a", "?i", REMOVE_MODE));
+
+	TEST_ASSERT(testAddOrRemoveBaseHelper("s://ex/a/b/", "s://ex/a/b/", "", REMOVE_MODE));
+	TEST_ASSERT(testAddOrRemoveBaseHelper("s://ex/a/b", "s://ex/a/b", "", REMOVE_MODE));
+	TEST_ASSERT(testAddOrRemoveBaseHelper("s://ex/", "s://ex/", "", REMOVE_MODE));
+
+	TEST_ASSERT(testAddOrRemoveBaseHelper("s://ex/a/b/c", "s://ex/a/d/c", "../b/c", REMOVE_MODE));
+	TEST_ASSERT(testAddOrRemoveBaseHelper("s://ex/a/b/c/", "s://ex/a/d/c", "../b/c/", REMOVE_MODE));
+	TEST_ASSERT(testAddOrRemoveBaseHelper("s://ex/a/b/c/d", "s://ex/a/d/c/d", "../../b/c/d", REMOVE_MODE));
+	TEST_ASSERT(testAddOrRemoveBaseHelper("s://ex/a/b/c", "s://ex/d/e/f", "/a/b/c", REMOVE_MODE, DOMAIN_ROOT_MODE));
+	TEST_ASSERT(testAddOrRemoveBaseHelper("s://ex/a/b/", "s://ex/a/c/d/e", "../../b/", REMOVE_MODE));
+
+	// Some tests to ensure that empty path segments don't cause problems.
+	TEST_ASSERT(testAddOrRemoveBaseHelper("s://ex/a/b", "s://ex/a//b/c", "../../b", REMOVE_MODE));
+	TEST_ASSERT(testAddOrRemoveBaseHelper("s://ex/a///b", "s://ex/a/", ".///b", REMOVE_MODE));
+	TEST_ASSERT(testAddOrRemoveBaseHelper("s://ex/a/", "s://ex/a///b", "../../", REMOVE_MODE));
+	TEST_ASSERT(testAddOrRemoveBaseHelper("s://ex/a//b/c", "s://ex/a/b", ".//b/c", REMOVE_MODE));
+}
+
+
+
+int FourSuite::testParseUri(const char * uriText) {
+	UriParserStateA state;
+	UriUriA uri;
+	state.uri = &uri;
+	int res = uriParseUriA(&state, uriText);
+	uriFreeUriMembersA(&uri);
+	return res;
+}
+
+
+
+bool FourSuite::testGoodUri(const char * uriText) {
+	return (testParseUri(uriText) == 0);
+}
+
+
+
+bool FourSuite::testBadUri(const char * uriText) {
+	return (testParseUri(uriText) == URI_ERROR_SYNTAX);
+}
+
+
+
+void FourSuite::good_URI_references() {
+	TEST_ASSERT(testGoodUri("file:///foo/bar"));
+	TEST_ASSERT(testGoodUri("mailto:user@host?subject=blah"));
+	TEST_ASSERT(testGoodUri("dav:")); // empty opaque part / rel-path allowed by RFC 2396bis
+	TEST_ASSERT(testGoodUri("about:")); // empty opaque part / rel-path allowed by RFC 2396bis
+
+	// the following test cases are from a Perl script by David A. Wheeler
+	// at http://www.dwheeler.com/secure-programs/url.pl
+	TEST_ASSERT(testGoodUri("http://www.yahoo.com"));
+	TEST_ASSERT(testGoodUri("http://www.yahoo.com/"));
+	TEST_ASSERT(testGoodUri("http://1.2.3.4/"));
+	TEST_ASSERT(testGoodUri("http://www.yahoo.com/stuff"));
+	TEST_ASSERT(testGoodUri("http://www.yahoo.com/stuff/"));
+	TEST_ASSERT(testGoodUri("http://www.yahoo.com/hello%20world/"));
+	TEST_ASSERT(testGoodUri("http://www.yahoo.com?name=obi"));
+	TEST_ASSERT(testGoodUri("http://www.yahoo.com?name=obi+wan&status=jedi"));
+	TEST_ASSERT(testGoodUri("http://www.yahoo.com?onery"));
+	TEST_ASSERT(testGoodUri("http://www.yahoo.com#bottom"));
+	TEST_ASSERT(testGoodUri("http://www.yahoo.com/yelp.html#bottom"));
+	TEST_ASSERT(testGoodUri("https://www.yahoo.com/"));
+	TEST_ASSERT(testGoodUri("ftp://www.yahoo.com/"));
+	TEST_ASSERT(testGoodUri("ftp://www.yahoo.com/hello"));
+	TEST_ASSERT(testGoodUri("demo.txt"));
+	TEST_ASSERT(testGoodUri("demo/hello.txt"));
+	TEST_ASSERT(testGoodUri("demo/hello.txt?query=hello#fragment"));
+	TEST_ASSERT(testGoodUri("/cgi-bin/query?query=hello#fragment"));
+	TEST_ASSERT(testGoodUri("/demo.txt"));
+	TEST_ASSERT(testGoodUri("/hello/demo.txt"));
+	TEST_ASSERT(testGoodUri("hello/demo.txt"));
+	TEST_ASSERT(testGoodUri("/"));
+	TEST_ASSERT(testGoodUri(""));
+	TEST_ASSERT(testGoodUri("#"));
+	TEST_ASSERT(testGoodUri("#here"));
+
+	// Wheeler's script says these are invalid, but they aren't
+	TEST_ASSERT(testGoodUri("http://www.yahoo.com?name=%00%01"));
+	TEST_ASSERT(testGoodUri("http://www.yaho%6f.com"));
+	TEST_ASSERT(testGoodUri("http://www.yahoo.com/hello%00world/"));
+	TEST_ASSERT(testGoodUri("http://www.yahoo.com/hello+world/"));
+	TEST_ASSERT(testGoodUri("http://www.yahoo.com?name=obi&"));
+	TEST_ASSERT(testGoodUri("http://www.yahoo.com?name=obi&type="));
+	TEST_ASSERT(testGoodUri("http://www.yahoo.com/yelp.html#"));
+	TEST_ASSERT(testGoodUri("//"));
+
+	// the following test cases are from a Haskell program by Graham Klyne
+	// at http://www.ninebynine.org/Software/HaskellUtils/Network/URITest.hs
+	TEST_ASSERT(testGoodUri("http://example.org/aaa/bbb#ccc"));
+	TEST_ASSERT(testGoodUri("mailto:local@domain.org"));
+	TEST_ASSERT(testGoodUri("mailto:local@domain.org#frag"));
+	TEST_ASSERT(testGoodUri("HTTP://EXAMPLE.ORG/AAA/BBB#CCC"));
+	TEST_ASSERT(testGoodUri("//example.org/aaa/bbb#ccc"));
+	TEST_ASSERT(testGoodUri("/aaa/bbb#ccc"));
+	TEST_ASSERT(testGoodUri("bbb#ccc"));
+	TEST_ASSERT(testGoodUri("#ccc"));
+	TEST_ASSERT(testGoodUri("#"));
+	TEST_ASSERT(testGoodUri("A'C"));
+
+	// escapes
+	TEST_ASSERT(testGoodUri("http://example.org/aaa%2fbbb#ccc"));
+	TEST_ASSERT(testGoodUri("http://example.org/aaa%2Fbbb#ccc"));
+	TEST_ASSERT(testGoodUri("%2F"));
+	TEST_ASSERT(testGoodUri("aaa%2Fbbb"));
+
+	// ports
+	TEST_ASSERT(testGoodUri("http://example.org:80/aaa/bbb#ccc"));
+	TEST_ASSERT(testGoodUri("http://example.org:/aaa/bbb#ccc"));
+	TEST_ASSERT(testGoodUri("http://example.org./aaa/bbb#ccc"));
+	TEST_ASSERT(testGoodUri("http://example.123./aaa/bbb#ccc"));
+
+	// bare authority
+	TEST_ASSERT(testGoodUri("http://example.org"));
+
+	// IPv6 literals (from RFC2732):
+	TEST_ASSERT(testGoodUri("http://[FEDC:BA98:7654:3210:FEDC:BA98:7654:3210]:80/index.html"));
+	TEST_ASSERT(testGoodUri("http://[1080:0:0:0:8:800:200C:417A]/index.html"));
+	TEST_ASSERT(testGoodUri("http://[3ffe:2a00:100:7031::1]"));
+	TEST_ASSERT(testGoodUri("http://[1080::8:800:200C:417A]/foo"));
+	TEST_ASSERT(testGoodUri("http://[::192.9.5.5]/ipng"));
+	TEST_ASSERT(testGoodUri("http://[::FFFF:129.144.52.38]:80/index.html"));
+	TEST_ASSERT(testGoodUri("http://[2010:836B:4179::836B:4179]"));
+	TEST_ASSERT(testGoodUri("//[2010:836B:4179::836B:4179]"));
+
+	// Random other things that crop up
+	TEST_ASSERT(testGoodUri("http://example/Andr&#567;"));
+	TEST_ASSERT(testGoodUri("file:///C:/DEV/Haskell/lib/HXmlToolbox-3.01/examples/"));
+}
+
+
+
+void FourSuite::bad_URI_references() {
+	TEST_ASSERT(testBadUri("beepbeep\x07\x07"));
+	TEST_ASSERT(testBadUri("\n"));
+	TEST_ASSERT(testBadUri("::")); // not OK, per Roy Fielding on the W3C uri list on 2004-04-01
+
+	// the following test cases are from a Perl script by David A. Wheeler
+	// at http://www.dwheeler.com/secure-programs/url.pl
+	TEST_ASSERT(testBadUri("http://www yahoo.com"));
+	TEST_ASSERT(testBadUri("http://www.yahoo.com/hello world/"));
+	TEST_ASSERT(testBadUri("http://www.yahoo.com/yelp.html#\""));
+
+	// the following test cases are from a Haskell program by Graham Klyne
+	// at http://www.ninebynine.org/Software/HaskellUtils/Network/URITest.hs
+	TEST_ASSERT(testBadUri("[2010:836B:4179::836B:4179]"));
+	TEST_ASSERT(testBadUri(" "));
+	TEST_ASSERT(testBadUri("%"));
+	TEST_ASSERT(testBadUri("A%Z"));
+	TEST_ASSERT(testBadUri("%ZZ"));
+	TEST_ASSERT(testBadUri("%AZ"));
+	TEST_ASSERT(testBadUri("A C"));
+	TEST_ASSERT(testBadUri("A\\'C")); // r"A\'C"
+	TEST_ASSERT(testBadUri("A`C"));
+	TEST_ASSERT(testBadUri("A<C"));
+	TEST_ASSERT(testBadUri("A>C"));
+	TEST_ASSERT(testBadUri("A^C"));
+	TEST_ASSERT(testBadUri("A\\\\C")); // r'A\\C'
+	TEST_ASSERT(testBadUri("A{C"));
+	TEST_ASSERT(testBadUri("A|C"));
+	TEST_ASSERT(testBadUri("A}C"));
+	TEST_ASSERT(testBadUri("A[C"));
+	TEST_ASSERT(testBadUri("A]C"));
+	TEST_ASSERT(testBadUri("A[**]C"));
+	TEST_ASSERT(testBadUri("http://[xyz]/"));
+	TEST_ASSERT(testBadUri("http://]/"));
+	TEST_ASSERT(testBadUri("http://example.org/[2010:836B:4179::836B:4179]"));
+	TEST_ASSERT(testBadUri("http://example.org/abc#[2010:836B:4179::836B:4179]"));
+	TEST_ASSERT(testBadUri("http://example.org/xxx/[qwerty]#a[b]"));
+
+	// from a post to the W3C uri list on 2004-02-17
+	TEST_ASSERT(testBadUri("http://w3c.org:80path1/path2"));
+}
+
+
+
+bool FourSuite::normalizeAndCompare(const char * uriText,
+		const char * expectedNormalized) {
+	UriParserStateA stateA;
+	int res;
+
+	UriUriA testUri;
+	stateA.uri = &testUri;
+	res = uriParseUriA(&stateA, uriText);
+	if (res != 0) {
+		uriFreeUriMembersA(&testUri);
+		return false;
+	}
+
+	// Expected result
+	UriUriA expectedUri;
+	stateA.uri = &expectedUri;
+	res = uriParseUriA(&stateA, expectedNormalized);
+	if (res != 0) {
+		uriFreeUriMembersA(&testUri);
+		uriFreeUriMembersA(&expectedUri);
+		return false;
+	}
+
+	res = uriNormalizeSyntaxA(&testUri);
+	if (res != 0) {
+		uriFreeUriMembersA(&testUri);
+		uriFreeUriMembersA(&expectedUri);
+		return false;
+	}
+
+	const bool equalAfter = (URI_TRUE == uriEqualsUriA(&testUri, &expectedUri));
+	uriFreeUriMembersA(&testUri);
+	uriFreeUriMembersA(&expectedUri);
+	return equalAfter;
+}
+
+
+
+void FourSuite::caseNormalizationTests() {
+	TEST_ASSERT(normalizeAndCompare("HTTP://www.EXAMPLE.com/", "http://www.example.com/"));
+	TEST_ASSERT(normalizeAndCompare("example://A/b/c/%7bfoo%7d", "example://a/b/c/%7Bfoo%7D"));
+}
+
+
+
+void FourSuite::pctEncNormalizationTests() {
+	TEST_ASSERT(normalizeAndCompare("http://host/%7Euser/x/y/z", "http://host/~user/x/y/z"));
+	TEST_ASSERT(normalizeAndCompare("http://host/%7euser/x/y/z", "http://host/~user/x/y/z"));
+}
+
+
+
+void FourSuite::pathSegmentNormalizationTests() {
+	TEST_ASSERT(normalizeAndCompare("/a/b/../../c", "/c"));
+	// TEST_ASSERT(normalizeAndCompare("a/b/../../c", "a/b/../../c"));
+	// Fixed:
+	TEST_ASSERT(normalizeAndCompare("a/b/../../c", "c"));
+	TEST_ASSERT(normalizeAndCompare("/a/b/././c", "/a/b/c"));
+	// TEST_ASSERT(normalizeAndCompare("a/b/././c", "a/b/././c"));
+	// Fixed:
+	TEST_ASSERT(normalizeAndCompare("a/b/././c", "a/b/c"));
+	TEST_ASSERT(normalizeAndCompare("/a/b/../c/././d", "/a/c/d"));
+	// TEST_ASSERT(normalizeAndCompare("a/b/../c/././d", "a/b/../c/././d"));
+	// Fixed:
+	TEST_ASSERT(normalizeAndCompare("a/b/../c/././d", "a/c/d"));
+}
diff -Nru /tmp/bxdedfLB6u/uriparser-0.6.0/test/FourSuite.h /tmp/fLjZ2dz9P3/uriparser-0.7.4/test/FourSuite.h
--- uriparser-0.6.0/test/FourSuite.h	2007-09-12 18:53:22.000000000 +0100
+++ uriparser-0.7.4/test/FourSuite.h	2008-12-20 18:52:46.000000000 +0000
@@ -1,69 +1,69 @@
-/*
- * uriparser - RFC 3986 URI parsing library
- *
- * Copyright (C) 2007, Weijia Song <songweijia@gmail.com>
- * Copyright (C) 2007, Sebastian Pipping <webmaster@hartwork.org>
- *
- * This library is free software; you can redistribute it and/or
- * modify it under the terms of the GNU Lesser General Public
- * License as published by the Free Software Foundation; either
- * version 2.1 of the License, or (at your option) any later version.
- *
- * This library is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * Lesser General Public License for more details.
- *
- * You should have received a copy of the GNU Lesser General Public
- * License along with this library; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301  USA
- */
-
-#ifndef TEST_FOUR_SUITE_H
-#define TEST_FOUR_SUITE_H 1
-
-
-
-#include "CppTest/cpptest.h"
-using namespace Test;
-
-
-
-class FourSuite : public Suite {
-
-public:
-	FourSuite() {
-		TEST_ADD(FourSuite::absolutize_test_cases)
-		TEST_ADD(FourSuite::relativize_test_cases)
-		TEST_ADD(FourSuite::good_URI_references)
-		TEST_ADD(FourSuite::bad_URI_references)
-		TEST_ADD(FourSuite::caseNormalizationTests)
-		TEST_ADD(FourSuite::pctEncNormalizationTests)
-		TEST_ADD(FourSuite::pathSegmentNormalizationTests)
-	}
-
-private:
-	bool testAddOrRemoveBaseHelper(const char * ref,
-			const char * base, const char * expected, bool add = true,
-			bool domainRootMode = false);
-
-	void absolutize_test_cases();
-	void relativize_test_cases();
-
-	int testParseUri(const char * uriText);
-	bool testGoodUri(const char * uriText);
-	bool testBadUri(const char * uriText);
-	void good_URI_references();
-	void bad_URI_references();
-
-	bool normalizeAndCompare(const char * uriText,
-		const char * expectedNormalized);
-	void caseNormalizationTests();
-	void pctEncNormalizationTests();
-	void pathSegmentNormalizationTests();
-
-};
-
-
-
-#endif // TEST_FOUR_SUITE_H
+/*
+ * uriparser - RFC 3986 URI parsing library
+ *
+ * Copyright (C) 2007, Weijia Song <songweijia@gmail.com>
+ * Copyright (C) 2007, Sebastian Pipping <webmaster@hartwork.org>
+ *
+ * This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public
+ * License as published by the Free Software Foundation; either
+ * version 2.1 of the License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public
+ * License along with this library; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#ifndef TEST_FOUR_SUITE_H
+#define TEST_FOUR_SUITE_H 1
+
+
+
+#include "CppTest/cpptest.h"
+using namespace Test;
+
+
+
+class FourSuite : public Suite {
+
+public:
+	FourSuite() {
+		TEST_ADD(FourSuite::absolutize_test_cases)
+		TEST_ADD(FourSuite::relativize_test_cases)
+		TEST_ADD(FourSuite::good_URI_references)
+		TEST_ADD(FourSuite::bad_URI_references)
+		TEST_ADD(FourSuite::caseNormalizationTests)
+		TEST_ADD(FourSuite::pctEncNormalizationTests)
+		TEST_ADD(FourSuite::pathSegmentNormalizationTests)
+	}
+
+private:
+	bool testAddOrRemoveBaseHelper(const char * ref,
+			const char * base, const char * expected, bool add = true,
+			bool domainRootMode = false);
+
+	void absolutize_test_cases();
+	void relativize_test_cases();
+
+	int testParseUri(const char * uriText);
+	bool testGoodUri(const char * uriText);
+	bool testBadUri(const char * uriText);
+	void good_URI_references();
+	void bad_URI_references();
+
+	bool normalizeAndCompare(const char * uriText,
+		const char * expectedNormalized);
+	void caseNormalizationTests();
+	void pctEncNormalizationTests();
+	void pathSegmentNormalizationTests();
+
+};
+
+
+
+#endif // TEST_FOUR_SUITE_H
diff -Nru /tmp/bxdedfLB6u/uriparser-0.6.0/test/test.cpp /tmp/fLjZ2dz9P3/uriparser-0.7.4/test/test.cpp
--- uriparser-0.6.0/test/test.cpp	2007-09-19 04:04:24.000000000 +0100
+++ uriparser-0.7.4/test/test.cpp	2008-12-21 04:23:53.000000000 +0000
@@ -50,12 +50,14 @@
 
 public:
 	UriSuite() {
+		TEST_ADD(UriSuite::testDistinction)
 		TEST_ADD(UriSuite::testIpFour)
 		TEST_ADD(UriSuite::testIpSixPass)
 		TEST_ADD(UriSuite::testIpSixFail)
 		TEST_ADD(UriSuite::testUri)
 		TEST_ADD(UriSuite::testUriUserInfoHostPort1)
 		TEST_ADD(UriSuite::testUriUserInfoHostPort2)
+		TEST_ADD(UriSuite::testUriUserInfoHostPort22_Bug1948038)
 		TEST_ADD(UriSuite::testUriUserInfoHostPort3)
 		TEST_ADD(UriSuite::testUriUserInfoHostPort4)
 		TEST_ADD(UriSuite::testUriUserInfoHostPort5)
@@ -67,20 +69,99 @@
 		TEST_ADD(UriSuite::testUriHostIpSix2)
 		TEST_ADD(UriSuite::testUriHostIpFuture)
 		TEST_ADD(UriSuite::testUriComponents)
-		TEST_ADD(UriSuite::testUriComponentsBug20070701)
+		TEST_ADD(UriSuite::testUriComponents_Bug20070701)
 		TEST_ADD(UriSuite::testEscaping)
 		TEST_ADD(UriSuite::testUnescaping)
 		TEST_ADD(UriSuite::testTrailingSlash)
 		TEST_ADD(UriSuite::testAddBase)
 		TEST_ADD(UriSuite::testToString)
+		TEST_ADD(UriSuite::testToString_Bug1950126)
 		TEST_ADD(UriSuite::testToStringCharsRequired)
 		TEST_ADD(UriSuite::testToStringCharsRequired)
 		TEST_ADD(UriSuite::testNormalizeSyntaxMaskRequired)
 		TEST_ADD(UriSuite::testNormalizeSyntax)
+		TEST_ADD(UriSuite::testNormalizeSyntaxComponents)
+		TEST_ADD(UriSuite::testNormalizeCrash_Bug20080224)
 		TEST_ADD(UriSuite::testFilenameUriConversion)
+		TEST_ADD(UriSuite::testCrash_FreeUriMembers_Bug20080116)
+		TEST_ADD(UriSuite::testCrash_Report2418192)
+		TEST_ADD(UriSuite::testPervertedQueryString);
+		TEST_ADD(UriSuite::testCrash_MakeOwner_Bug20080207)
+		TEST_ADD(UriSuite::testQueryList)
+		TEST_ADD(UriSuite::testQueryListPair)
+		TEST_ADD(UriSuite::testFreeCrash_Bug20080827)
 	}
 
 private:
+	bool testDistinctionHelper(const char * uriText, bool expectedHostSet,
+			bool expectedAbsPath, bool expectedEmptyTailSegment) {
+		UriParserStateA state;
+		UriUriA uri;
+		state.uri = &uri;
+
+		int res = uriParseUriA(&state, uriText);
+		if (res != URI_SUCCESS) {
+			uriFreeUriMembersA(&uri);
+			return false;
+		}
+
+		if (expectedHostSet != (uri.hostText.first != NULL)) {
+			uriFreeUriMembersA(&uri);
+			return false;
+		}
+
+		if (expectedAbsPath != (uri.absolutePath == URI_TRUE)) {
+			uriFreeUriMembersA(&uri);
+			return false;
+		}
+
+		if (expectedEmptyTailSegment != ((uri.pathTail != NULL)
+				&& (uri.pathTail->text.first == uri.pathTail->text.afterLast))) {
+			uriFreeUriMembersA(&uri);
+			return false;
+		}
+
+		uriFreeUriMembersA(&uri);
+		return true;
+	}
+
+	void testDistinction() {
+		/*
+============================================================================
+Rule                                | Example | hostSet | absPath | emptySeg
+------------------------------------|---------|---------|---------|---------
+1) URI = scheme ":" hier-part ...   |         |         |         |
+   1) "//" authority path-abempty   | "s://"  | true    |   false |   false
+                                    | "s:///" | true    |   false | true
+   2) path-absolute                 | "s:/"   |   false | true    |   false
+   3) path-rootless                 | "s:a"   |   false |   false |   false
+                                    | "s:a/"  |   false |   false | true
+   4) path-empty                    | "s:"    |   false |   false |   false
+------------------------------------|---------|---------|---------|---------
+2) relative-ref = relative-part ... |         |         |         |
+   1) "//" authority path-abempty   | "//"    | true    |   false |   false
+                                    | "///"   | true    |   false | true
+   2) path-absolute                 | "/"     |   false | true    |   false
+   3) path-noscheme                 | "a"     |   false |   false |   false
+                                    | "a/"    |   false |   false | true
+   4) path-empty                    | ""      |   false |   false |   false
+============================================================================
+		*/
+		TEST_ASSERT(testDistinctionHelper("s://", true, false, false));
+		TEST_ASSERT(testDistinctionHelper("s:///", true, false, true));
+		TEST_ASSERT(testDistinctionHelper("s:/", false, true, false));
+		TEST_ASSERT(testDistinctionHelper("s:a", false, false, false));
+		TEST_ASSERT(testDistinctionHelper("s:a/", false, false, true));
+		TEST_ASSERT(testDistinctionHelper("s:", false, false, false));
+
+		TEST_ASSERT(testDistinctionHelper("//", true, false, false));
+		TEST_ASSERT(testDistinctionHelper("///", true, false, true));
+		TEST_ASSERT(testDistinctionHelper("/", false, true, false));
+		TEST_ASSERT(testDistinctionHelper("a", false, false, false));
+		TEST_ASSERT(testDistinctionHelper("a/", false, false, true));
+		TEST_ASSERT(testDistinctionHelper("", false, false, false));
+	}
+
 	void testIpFour() {
 		URI_TEST_IP_FOUR_FAIL("01.0.0.0");
 		URI_TEST_IP_FOUR_FAIL("001.0.0.0");
@@ -301,7 +382,7 @@
 		uriFreeUriMembersA(&uriA);
 	}
 
-	void testUriComponentsBug20070701() {
+	void testUriComponents_Bug20070701() {
 		UriParserStateA stateA;
 		UriUriA uriA;
 		stateA.uri = &uriA;
@@ -372,6 +453,36 @@
 		uriFreeUriMembersA(&uriA);
 	}
 
+	void testUriUserInfoHostPort22_Bug1948038() {
+		UriParserStateA stateA;
+		UriUriA uriA;
+		stateA.uri = &uriA;
+
+		int res;
+
+		res = uriParseUriA(&stateA, "http://user:21@host/");
+		TEST_ASSERT(URI_SUCCESS == res);
+		TEST_ASSERT(!memcmp(uriA.userInfo.first, "user:21", 7 * sizeof(char)));
+		TEST_ASSERT(uriA.userInfo.afterLast - uriA.userInfo.first == 7);
+		TEST_ASSERT(!memcmp(uriA.hostText.first, "host", 4 * sizeof(char)));
+		TEST_ASSERT(uriA.hostText.afterLast - uriA.hostText.first == 4);
+		TEST_ASSERT(uriA.portText.first == NULL);
+		TEST_ASSERT(uriA.portText.afterLast == NULL);
+		uriFreeUriMembersA(&uriA);
+
+		res = uriParseUriA(&stateA, "http://user:1234@192.168.0.1:1234/foo.com");
+		TEST_ASSERT(URI_SUCCESS == res);
+		uriFreeUriMembersA(&uriA);
+
+		res = uriParseUriA(&stateA, "http://moo:21@moo:21@moo/");
+		TEST_ASSERT(URI_ERROR_SYNTAX == res);
+		uriFreeUriMembersA(&uriA);
+
+		res = uriParseUriA(&stateA, "http://moo:21@moo:21@moo:21/");
+		TEST_ASSERT(URI_ERROR_SYNTAX == res);
+		uriFreeUriMembersA(&uriA);
+	}
+
 	void testUriUserInfoHostPort3() {
 		// User info without ":", no port
 		UriParserStateA stateA;
@@ -597,12 +708,14 @@
 
 	bool testUnescapingHelper(const wchar_t * input, const wchar_t * output,
 			bool plusToSpace = false, UriBreakConversion breakConversion = URI_BR_DONT_TOUCH) {
-		wchar_t * working = static_cast<URI_CHAR *>(malloc((URI_STRLEN(input) + 1) * sizeof(URI_CHAR)));
+		wchar_t * working = new wchar_t[URI_STRLEN(input) + 1];
 		wcscpy(working, input);
 		const wchar_t * newTermZero = uriUnescapeInPlaceExW(working,
 				plusToSpace ? URI_TRUE : URI_FALSE, breakConversion);
-		return ((newTermZero == working + wcslen(output))
+		const bool success = ((newTermZero == working + wcslen(output))
 				&& !wcscmp(working, output));
+		delete[] working;
+		return success;
 	}
 
 	void testUnescaping() {
@@ -701,6 +814,7 @@
 		stateW.uri = &baseUri;
 		int res = uriParseUriW(&stateW, base);
 		if (res != 0) {
+			uriFreeUriMembersW(&baseUri);
 			return false;
 		}
 
@@ -710,6 +824,7 @@
 		res = uriParseUriW(&stateW, rel);
 		if (res != 0) {
 			uriFreeUriMembersW(&baseUri);
+			uriFreeUriMembersW(&relUri);
 			return false;
 		}
 
@@ -720,6 +835,7 @@
 		if (res != 0) {
 			uriFreeUriMembersW(&baseUri);
 			uriFreeUriMembersW(&relUri);
+			uriFreeUriMembersW(&expectedUri);
 			return false;
 		}
 
@@ -729,6 +845,8 @@
 		if (res != 0) {
 			uriFreeUriMembersW(&baseUri);
 			uriFreeUriMembersW(&relUri);
+			uriFreeUriMembersW(&expectedUri);
+			uriFreeUriMembersW(&transformedUri);
 			return false;
 		}
 
@@ -738,12 +856,15 @@
 			wchar_t expectedUriText[1024 * 8];
 			uriToStringW(transformedUriText, &transformedUri, 1024 * 8, NULL);
 			uriToStringW(expectedUriText, &expectedUri, 1024 * 8, NULL);
+#ifdef HAVE_WPRINTF
 			wprintf(L"\n\n\nExpected: \"%s\"\nReceived: \"%s\"\n\n\n", expectedUriText, transformedUriText);
+#endif
 		}
 
 		uriFreeUriMembersW(&baseUri);
 		uriFreeUriMembersW(&relUri);
 		uriFreeUriMembersW(&expectedUri);
+		uriFreeUriMembersW(&transformedUri);
 		return equal;
 	}
 
@@ -833,7 +954,9 @@
 		// Compare
 		bool equals = (0 == wcscmp(shouldbeTheSame, text));
 		if (!equals) {
+#ifdef HAVE_WPRINTF
 			wprintf(L"\n\n\nExpected: \"%s\"\nReceived: \"%s\"\n\n\n", text, shouldbeTheSame);
+#endif
 		}
 
 		// Back to string, _exact_ limit
@@ -870,10 +993,11 @@
 		// Port
 		TEST_ASSERT(testToStringHelper(L"http://example.com:123/"));
 		// Path
+		TEST_ASSERT(testToStringHelper(L"http://example.com"));
 		TEST_ASSERT(testToStringHelper(L"http://example.com/"));
 		TEST_ASSERT(testToStringHelper(L"http://example.com/abc/"));
 		TEST_ASSERT(testToStringHelper(L"http://example.com/abc/def"));
-		TEST_ASSERT(testToStringHelper(L"http://example.com/abc/def"));
+		TEST_ASSERT(testToStringHelper(L"http://example.com/abc/def/"));
 		TEST_ASSERT(testToStringHelper(L"http://example.com//"));
 		TEST_ASSERT(testToStringHelper(L"http://example.com/./.."));
 		// Query
@@ -915,6 +1039,24 @@
 		TEST_ASSERT(testToStringHelper(L"f:/.//g"));
 	}
 
+	void testToString_Bug1950126() {
+		UriParserStateW state;
+		UriUriW uriOne;
+		UriUriW uriTwo;
+		const wchar_t * const uriOneString = L"http://e.com/";
+		const wchar_t * const uriTwoString = L"http://e.com";
+		state.uri = &uriOne;
+		TEST_ASSERT(URI_SUCCESS == uriParseUriW(&state, uriOneString));
+		state.uri = &uriTwo;
+		TEST_ASSERT(URI_SUCCESS == uriParseUriW(&state, uriTwoString));
+		TEST_ASSERT(URI_FALSE == uriEqualsUriW(&uriOne, &uriTwo));
+		uriFreeUriMembersW(&uriOne);
+		uriFreeUriMembersW(&uriTwo);
+
+		TEST_ASSERT(testToStringHelper(uriOneString));
+		TEST_ASSERT(testToStringHelper(uriTwoString));
+	}
+
 	bool testToStringCharsRequiredHelper(wchar_t * text) {
 		// Parse
 		UriParserStateW state;
@@ -1006,7 +1148,8 @@
 		TEST_ASSERT(testNormalizeMaskHelper(L"http://localhost/#AB%43", URI_NORMALIZE_FRAGMENT));
 	}
 
-	bool testNormalizeSyntaxHelper(wchar_t * uriText, wchar_t * expectedNormalized) {
+	bool testNormalizeSyntaxHelper(wchar_t * uriText, wchar_t * expectedNormalized,
+			unsigned int mask = static_cast<unsigned int>(-1)) {
 		UriParserStateW stateW;
 		int res;
 
@@ -1028,21 +1171,27 @@
 			return false;
 		}
 
-		const bool equalBefore = (URI_TRUE == uriEqualsUriW(&testUri, &expectedUri));
-		if (equalBefore) {
+		// First run
+		res = uriNormalizeSyntaxExW(&testUri, mask);
+		if (res != 0) {
 			uriFreeUriMembersW(&testUri);
 			uriFreeUriMembersW(&expectedUri);
 			return false;
 		}
 
-		res = uriNormalizeSyntaxW(&testUri);
+		bool equalAfter = (URI_TRUE == uriEqualsUriW(&testUri, &expectedUri));
+
+		// Second run
+		res = uriNormalizeSyntaxExW(&testUri, mask);
 		if (res != 0) {
 			uriFreeUriMembersW(&testUri);
 			uriFreeUriMembersW(&expectedUri);
 			return false;
 		}
 
-		const bool equalAfter = (URI_TRUE == uriEqualsUriW(&testUri, &expectedUri));
+		equalAfter = equalAfter
+				&& (URI_TRUE == uriEqualsUriW(&testUri, &expectedUri));
+
 		uriFreeUriMembersW(&testUri);
 		uriFreeUriMembersW(&expectedUri);
 		return equalAfter;
@@ -1052,6 +1201,115 @@
 		TEST_ASSERT(testNormalizeSyntaxHelper(
 				L"eXAMPLE://a/./b/../b/%63/%7bfoo%7d",
 				L"example://a/b/c/%7Bfoo%7D"));
+
+		// Testcase by Adrian Manrique
+		TEST_ASSERT(testNormalizeSyntaxHelper(
+				L"http://examp%4Ce.com/",
+				L"http://example.com/"));
+
+		// Testcase by Adrian Manrique
+		TEST_ASSERT(testNormalizeSyntaxHelper(
+				L"http://example.com/a/b/%2E%2E/",
+				L"http://example.com/a/"));
+
+		// Reported by Adrian Manrique
+		TEST_ASSERT(testNormalizeSyntaxHelper(
+				L"http://user:pass@SOMEHOST.COM:123",
+				L"http://user:pass@somehost.com:123"));
+
+		TEST_ASSERT(testNormalizeSyntaxHelper(
+				L"HTTP://a:b@HOST:123/./1/2/../%41?abc#def",
+				L"http://a:b@host:123/1/A?abc#def"));
+
+		TEST_ASSERT(testNormalizeSyntaxHelper(
+				L"../../abc",
+				L"../../abc"));
+
+		TEST_ASSERT(testNormalizeSyntaxHelper(
+				L"../../abc/..",
+				L"../../"));
+
+		TEST_ASSERT(testNormalizeSyntaxHelper(
+				L"../../abc/../def",
+				L"../../def"));
+
+		TEST_ASSERT(testNormalizeSyntaxHelper(
+				L"abc/..",
+				L""));
+
+		TEST_ASSERT(testNormalizeSyntaxHelper(
+				L"abc/../",
+				L""));
+
+		TEST_ASSERT(testNormalizeSyntaxHelper(
+				L"../../abc/./def",
+				L"../../abc/def"));
+
+		TEST_ASSERT(testNormalizeSyntaxHelper(
+				L"./def",
+				L"def"));
+
+		TEST_ASSERT(testNormalizeSyntaxHelper(
+				L"def/.",
+				L"def/"));
+
+		TEST_ASSERT(testNormalizeSyntaxHelper(
+				L"./abc:def",
+				L"./abc:def"));
+	}
+
+	void testNormalizeSyntaxComponents() {
+		TEST_ASSERT(testNormalizeSyntaxHelper(
+				L"HTTP://%41@EXAMPLE.ORG/../a?%41#%41",
+				L"http://%41@EXAMPLE.ORG/../a?%41#%41",
+				URI_NORMALIZE_SCHEME));
+
+		TEST_ASSERT(testNormalizeSyntaxHelper(
+				L"HTTP://%41@EXAMPLE.ORG/../a?%41#%41",
+				L"HTTP://A@EXAMPLE.ORG/../a?%41#%41",
+				URI_NORMALIZE_USER_INFO));
+
+		TEST_ASSERT(testNormalizeSyntaxHelper(
+				L"HTTP://%41@EXAMPLE.ORG/../a?%41#%41",
+				L"HTTP://%41@example.org/../a?%41#%41",
+				URI_NORMALIZE_HOST));
+
+		TEST_ASSERT(testNormalizeSyntaxHelper(
+				L"HTTP://%41@EXAMPLE.ORG/../a?%41#%41",
+				L"HTTP://%41@EXAMPLE.ORG/a?%41#%41",
+				URI_NORMALIZE_PATH));
+
+		TEST_ASSERT(testNormalizeSyntaxHelper(
+				L"HTTP://%41@EXAMPLE.ORG/../a?%41#%41",
+				L"HTTP://%41@EXAMPLE.ORG/../a?A#%41",
+				URI_NORMALIZE_QUERY));
+
+		TEST_ASSERT(testNormalizeSyntaxHelper(
+				L"HTTP://%41@EXAMPLE.ORG/../a?%41#%41",
+				L"HTTP://%41@EXAMPLE.ORG/../a?%41#A",
+				URI_NORMALIZE_FRAGMENT));
+	}
+
+	void testNormalizeCrash_Bug20080224() {
+		UriParserStateW stateW;
+		int res;
+		UriUriW testUri;
+		stateW.uri = &testUri;
+
+		res = uriParseUriW(&stateW, L"http://example.org/abc//../def");
+		TEST_ASSERT(res == 0);
+
+		// First call will make us owner of copied memory
+		res = uriNormalizeSyntaxExW(&testUri, URI_NORMALIZE_SCHEME);
+		TEST_ASSERT(res == 0);
+		res = uriNormalizeSyntaxExW(&testUri, URI_NORMALIZE_HOST);
+		TEST_ASSERT(res == 0);
+
+		// Frees empty path segment -> crash
+		res = uriNormalizeSyntaxW(&testUri);
+		TEST_ASSERT(res == 0);
+
+		uriFreeUriMembersW(&testUri);
 	}
 
 	void testFilenameUriConversionHelper(const wchar_t * filename,
@@ -1066,17 +1324,23 @@
 		} else {
 			uriWindowsFilenameToUriStringW(filename, uriBuffer);
 		}
+#ifdef HAVE_WPRINTF
+		// wprintf(L"1 [%s][%s]\n", uriBuffer, uriString);
+#endif
 		TEST_ASSERT(!wcscmp(uriBuffer, uriString));
 		delete [] uriBuffer;
 
 		// URI string to filename
-		const size_t filenameBufferLen = wcslen(uriString) + 1 - prefixLen;
+		const size_t filenameBufferLen = wcslen(uriString) + 1;
 		wchar_t * filenameBuffer = new wchar_t[filenameBufferLen];
 		if (forUnix) {
 			uriUriStringToUnixFilenameW(uriString, filenameBuffer);
 		} else {
 			uriUriStringToWindowsFilenameW(uriString, filenameBuffer);
 		}
+#ifdef HAVE_WPRINTF
+		// wprintf(L"2 [%s][%s]\n", filenameBuffer, filename);
+#endif
 		TEST_ASSERT(!wcscmp(filenameBuffer, filename));
 		delete [] filenameBuffer;
 	}
@@ -1085,7 +1349,180 @@
 		const bool FOR_UNIX = true;
 		const bool FOR_WINDOWS = false;
 		testFilenameUriConversionHelper(L"/bin/bash", L"file:///bin/bash", FOR_UNIX);
+		testFilenameUriConversionHelper(L"./configure", L"./configure", FOR_UNIX);
+
 		testFilenameUriConversionHelper(L"E:\\Documents and Settings", L"file:///E:/Documents%20and%20Settings", FOR_WINDOWS);
+		testFilenameUriConversionHelper(L".\\Readme.txt", L"./Readme.txt", FOR_WINDOWS);
+
+		testFilenameUriConversionHelper(L"index.htm", L"index.htm", FOR_WINDOWS);
+		testFilenameUriConversionHelper(L"index.htm", L"index.htm", FOR_UNIX);
+
+		testFilenameUriConversionHelper(L"abc def", L"abc%20def", FOR_WINDOWS);
+		testFilenameUriConversionHelper(L"abc def", L"abc%20def", FOR_UNIX);
+	}
+
+	void testCrash_FreeUriMembers_Bug20080116() {
+		// Testcase by Adrian Manrique
+		UriParserStateA state;
+		UriUriA uri;
+		state.uri = &uri;
+		uriParseUriA(&state, "http://test/?");
+		uriNormalizeSyntaxA(&uri);
+		uriFreeUriMembersA(&uri);
+
+		TEST_ASSERT(true);
+	}
+
+	void testCrash_Report2418192() {
+		// Testcase by Harvey Vrsalovic
+		helperTestQueryString("http://svcs.cnn.com/weather/wrapper.jsp?&csiID=csi1", 1);
+	}
+
+	void testPervertedQueryString() {
+		helperTestQueryString("http://example.org/?&&=&&&=&&&&==&===&====", 5);
+	}
+
+	void helperTestQueryString(char const * uriString, int pairsExpected) {
+		UriParserStateA state;
+		UriUriA uri;
+		state.uri = &uri;
+		int res = uriParseUriA(&state, uriString);
+		TEST_ASSERT(res == URI_SUCCESS);
+
+		UriQueryListA * queryList = NULL;
+		int itemCount = 0;
+
+		res = uriDissectQueryMallocA(&queryList, &itemCount,
+				uri.query.first, uri.query.afterLast);
+		TEST_ASSERT(res == URI_SUCCESS);
+		TEST_ASSERT(queryList != NULL);
+		TEST_ASSERT(itemCount == pairsExpected);
+		uriFreeQueryListA(queryList);
+		uriFreeUriMembersA(&uri);
+	}
+
+	void testCrash_MakeOwner_Bug20080207() {
+		// Testcase by Adrian Manrique
+		UriParserStateA state;
+		UriUriA sourceUri;
+		state.uri = &sourceUri;
+		const char * const sourceUriString = "http://user:pass@somehost.com:80/";
+		if (uriParseUriA(&state, sourceUriString) != 0) {
+			TEST_ASSERT(false);
+		}
+		if (uriNormalizeSyntaxA(&sourceUri) != 0) {
+			TEST_ASSERT(false);
+		}
+		uriFreeUriMembersA(&sourceUri);
+		TEST_ASSERT(true);
+	}
+
+	void testQueryListHelper(const wchar_t * input, int expectedItemCount) {
+		int res;
+
+		UriBool spacePlusConversion = URI_TRUE;
+		UriBool normalizeBreaks = URI_FALSE;
+		UriBreakConversion breakConversion = URI_BR_DONT_TOUCH;
+
+		int itemCount;
+		UriQueryListW * queryList;
+		res = uriDissectQueryMallocExW(&queryList, &itemCount,
+				input, input + wcslen(input), spacePlusConversion, breakConversion);
+		TEST_ASSERT(res == URI_SUCCESS);
+		TEST_ASSERT(itemCount == expectedItemCount);
+		TEST_ASSERT((queryList == NULL) == (expectedItemCount == 0));
+
+		if (expectedItemCount != 0) {
+			// First
+			int charsRequired;
+			res = uriComposeQueryCharsRequiredExW(queryList, &charsRequired, spacePlusConversion,
+					normalizeBreaks);
+			TEST_ASSERT(res == URI_SUCCESS);
+			TEST_ASSERT(charsRequired >= (int)wcslen(input));
+
+			wchar_t * recomposed = new wchar_t[charsRequired + 1];
+			int charsWritten;
+			res = uriComposeQueryExW(recomposed, queryList, charsRequired + 1,
+					&charsWritten, spacePlusConversion, normalizeBreaks);
+			TEST_ASSERT(res == URI_SUCCESS);
+			TEST_ASSERT(charsWritten <= charsRequired);
+			TEST_ASSERT(charsWritten = (int)wcslen(input) + 1);
+			TEST_ASSERT(!wcscmp(input, recomposed));
+			delete [] recomposed;
+
+			recomposed = NULL;
+			res = uriComposeQueryMallocW(&recomposed, queryList);
+			TEST_ASSERT(res == URI_SUCCESS);
+			TEST_ASSERT(recomposed != NULL);
+			TEST_ASSERT(charsWritten = (int)wcslen(input) + 1);
+			TEST_ASSERT(!wcscmp(input, recomposed));
+			free(recomposed);
+		}
+
+		uriFreeQueryListW(queryList);
+	}
+
+	void testQueryList() {
+		testQueryListHelper(L"one=ONE&two=TWO", 2);
+		testQueryListHelper(L"one=ONE&two=&three=THREE", 3);
+		testQueryListHelper(L"one=ONE&two&three=THREE", 3);
+		testQueryListHelper(L"one=ONE", 1);
+		testQueryListHelper(L"one", 1);
+		testQueryListHelper(L"", 0);
+	}
+
+	void testQueryListPairHelper(const char * pair, const char * unescapedKey,
+			const char * unescapedValue, const char * fixed = NULL) {
+		int res;
+		UriQueryListA * queryList;
+		int itemCount;
+
+		res = uriDissectQueryMallocA(&queryList, &itemCount, pair, pair + strlen(pair));
+		TEST_ASSERT(res == URI_SUCCESS);
+		TEST_ASSERT(queryList != NULL);
+		TEST_ASSERT(itemCount = 1);
+		TEST_ASSERT(!strcmp(queryList->key, unescapedKey));
+		TEST_ASSERT(!strcmp(queryList->value, unescapedValue));
+
+		char * recomposed;
+		res = uriComposeQueryMallocA(&recomposed, queryList);
+		TEST_ASSERT(res == URI_SUCCESS);
+		TEST_ASSERT(recomposed != NULL);
+		TEST_ASSERT(!strcmp(recomposed, (fixed != NULL) ? fixed : pair));
+		free(recomposed);
+		uriFreeQueryListA(queryList);
+	}
+
+	void testQueryListPair() {
+		testQueryListPairHelper("one+two+%26+three=%2B", "one two & three", "+");
+		testQueryListPairHelper("one=two=three", "one", "two=three", "one=two%3Dthree");
+		testQueryListPairHelper("one=two=three=four", "one", "two=three=four", "one=two%3Dthree%3Dfour");
+	}
+
+	void testFreeCrash_Bug20080827() {
+		char const * const sourceUri = "abc";
+		char const * const baseUri = "http://www.example.org/";
+
+		int res;
+		UriParserStateA state;
+		UriUriA absoluteDest;
+		UriUriA relativeSource;
+		UriUriA absoluteBase;
+
+		state.uri = &relativeSource;
+		res = uriParseUriA(&state, sourceUri);
+		TEST_ASSERT(res == URI_SUCCESS);
+
+		state.uri = &absoluteBase;
+		res = uriParseUriA(&state, baseUri);
+		TEST_ASSERT(res == URI_SUCCESS);
+
+		res = uriRemoveBaseUriA(&absoluteDest, &relativeSource, &absoluteBase, URI_FALSE);
+		TEST_ASSERT(res == URI_ERROR_REMOVEBASE_REL_SOURCE);
+
+		uriFreeUriMembersA(&relativeSource);
+		uriFreeUriMembersA(&absoluteBase);
+		uriFreeUriMembersA(&absoluteDest); // Crashed here
 	}
 
 };
diff -Nru /tmp/bxdedfLB6u/uriparser-0.6.0/THANKS /tmp/fLjZ2dz9P3/uriparser-0.7.4/THANKS
--- uriparser-0.6.0/THANKS	1970-01-01 01:00:00.000000000 +0100
+++ uriparser-0.7.4/THANKS	2008-12-20 18:52:47.000000000 +0000
@@ -0,0 +1,22 @@
+Adeodato Simó
+Adrian Manrique
+Arkadiusz Miskiewicz
+Blair Sadewitz
+Cristian Rodriguez
+Daniel Chapiesky
+Dennis Veatch
+Dr. Michael Lauer
+Ed Schouten
+Edward Z. Yang
+Eren Türkay
+Friedrich Delgado Friedrichs
+Harvey Vrsalovic
+Juan Pablo González Tognarelli
+Martin Michlmayr
+Michael Anthony Puls II
+Michelino Chionchio
+Ralf S. Engelschall
+René Rebe
+Robert Buchholz
+Sezai Tekin
+Vitaly Lipatov
diff -Nru /tmp/bxdedfLB6u/uriparser-0.6.0/win32/Code_Blocks/test.cbp /tmp/fLjZ2dz9P3/uriparser-0.7.4/win32/Code_Blocks/test.cbp
--- uriparser-0.6.0/win32/Code_Blocks/test.cbp	2007-08-09 04:17:41.000000000 +0100
+++ uriparser-0.7.4/win32/Code_Blocks/test.cbp	2008-12-20 18:52:46.000000000 +0000
@@ -1,19 +1,21 @@
 <?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
 <CodeBlocks_project_file>
-	<FileVersion major="1" minor="4" />
+	<FileVersion major="1" minor="6" />
 	<Project>
 		<Option title="test" />
 		<Option pch_mode="0" />
 		<Option compiler="gcc" />
 		<Build>
 			<Target title="default">
-				<Option output="..\test.exe" />
+				<Option output="..\test.exe" prefix_auto="0" extension_auto="0" />
 				<Option working_dir="..\..\test" />
 				<Option type="1" />
 				<Option compiler="gcc" />
-				<Option includeInTargetAll="1" />
 			</Target>
 		</Build>
+		<VirtualTargets>
+			<Add alias="All" targets="default;" />
+		</VirtualTargets>
 		<Compiler>
 			<Add option="-pedantic" />
 			<Add option="-W" />
@@ -24,169 +26,39 @@
 			<Add library="..\liburiparser.a" />
 			<Add directory="..\" />
 		</Linker>
-		<Unit filename="..\..\include\uriparser\Uri.h">
-			<Option compilerVar="CPP" />
-			<Option compile="0" />
-			<Option link="0" />
-			<Option target="default" />
-		</Unit>
-		<Unit filename="..\..\include\uriparser\UriBase.h">
-			<Option compilerVar="CPP" />
-			<Option compile="0" />
-			<Option link="0" />
-			<Option target="default" />
-		</Unit>
-		<Unit filename="..\..\include\uriparser\UriDefsAnsi.h">
-			<Option compilerVar="CPP" />
-			<Option compile="0" />
-			<Option link="0" />
-			<Option target="default" />
-		</Unit>
-		<Unit filename="..\..\include\uriparser\UriDefsConfig.h">
-			<Option compilerVar="CPP" />
-			<Option compile="0" />
-			<Option link="0" />
-			<Option target="default" />
-		</Unit>
-		<Unit filename="..\..\include\uriparser\UriDefsUnicode.h">
-			<Option compilerVar="CPP" />
-			<Option compile="0" />
-			<Option link="0" />
-			<Option target="default" />
-		</Unit>
-		<Unit filename="..\..\include\uriparser\UriIp4.h">
-			<Option compilerVar="CPP" />
-			<Option compile="0" />
-			<Option link="0" />
-			<Option target="default" />
-		</Unit>
-		<Unit filename="..\..\test\CppTest\collectoroutput.cpp">
-			<Option compilerVar="CPP" />
-			<Option target="default" />
-		</Unit>
-		<Unit filename="..\..\test\CppTest\compileroutput.cpp">
-			<Option compilerVar="CPP" />
-			<Option target="default" />
-		</Unit>
-		<Unit filename="..\..\test\CppTest\cpptest-assert.h">
-			<Option compilerVar="CPP" />
-			<Option compile="0" />
-			<Option link="0" />
-			<Option target="default" />
-		</Unit>
-		<Unit filename="..\..\test\CppTest\cpptest-collectoroutput.h">
-			<Option compilerVar="CPP" />
-			<Option compile="0" />
-			<Option link="0" />
-			<Option target="default" />
-		</Unit>
-		<Unit filename="..\..\test\CppTest\cpptest-compileroutput.h">
-			<Option compilerVar="CPP" />
-			<Option compile="0" />
-			<Option link="0" />
-			<Option target="default" />
-		</Unit>
-		<Unit filename="..\..\test\CppTest\cpptest-htmloutput.h">
-			<Option compilerVar="CPP" />
-			<Option compile="0" />
-			<Option link="0" />
-			<Option target="default" />
-		</Unit>
-		<Unit filename="..\..\test\CppTest\cpptest-output.h">
-			<Option compilerVar="CPP" />
-			<Option compile="0" />
-			<Option link="0" />
-			<Option target="default" />
-		</Unit>
-		<Unit filename="..\..\test\CppTest\cpptest-source.h">
-			<Option compilerVar="CPP" />
-			<Option compile="0" />
-			<Option link="0" />
-			<Option target="default" />
-		</Unit>
-		<Unit filename="..\..\test\CppTest\cpptest-suite.h">
-			<Option compilerVar="CPP" />
-			<Option compile="0" />
-			<Option link="0" />
-			<Option target="default" />
-		</Unit>
-		<Unit filename="..\..\test\CppTest\cpptest-textoutput.h">
-			<Option compilerVar="CPP" />
-			<Option compile="0" />
-			<Option link="0" />
-			<Option target="default" />
-		</Unit>
-		<Unit filename="..\..\test\CppTest\cpptest-time.h">
-			<Option compilerVar="CPP" />
-			<Option compile="0" />
-			<Option link="0" />
-			<Option target="default" />
-		</Unit>
-		<Unit filename="..\..\test\CppTest\cpptest.h">
-			<Option compilerVar="CPP" />
-			<Option compile="0" />
-			<Option link="0" />
-			<Option target="default" />
-		</Unit>
-		<Unit filename="..\..\test\CppTest\htmloutput.cpp">
-			<Option compilerVar="CPP" />
-			<Option target="default" />
-		</Unit>
-		<Unit filename="..\..\test\CppTest\missing.cpp">
-			<Option compilerVar="CPP" />
-			<Option target="default" />
-		</Unit>
-		<Unit filename="..\..\test\CppTest\missing.h">
-			<Option compilerVar="CPP" />
-			<Option compile="0" />
-			<Option link="0" />
-			<Option target="default" />
-		</Unit>
-		<Unit filename="..\..\test\CppTest\source.cpp">
-			<Option compilerVar="CPP" />
-			<Option target="default" />
-		</Unit>
-		<Unit filename="..\..\test\CppTest\suite.cpp">
-			<Option compilerVar="CPP" />
-			<Option target="default" />
-		</Unit>
-		<Unit filename="..\..\test\CppTest\textoutput.cpp">
-			<Option compilerVar="CPP" />
-			<Option target="default" />
-		</Unit>
-		<Unit filename="..\..\test\CppTest\time.cpp">
-			<Option compilerVar="CPP" />
-			<Option target="default" />
-		</Unit>
-		<Unit filename="..\..\test\CppTest\utils.cpp">
-			<Option compilerVar="CPP" />
-			<Option target="default" />
-		</Unit>
-		<Unit filename="..\..\test\CppTest\utils.h">
-			<Option compilerVar="CPP" />
-			<Option compile="0" />
-			<Option link="0" />
-			<Option target="default" />
-		</Unit>
-		<Unit filename="..\..\test\CppTest\winconfig.h">
-			<Option compilerVar="CPP" />
-			<Option compile="0" />
-			<Option link="0" />
-			<Option target="default" />
-		</Unit>
-		<Unit filename="..\..\test\FourSuite.cpp">
-			<Option compilerVar="CPP" />
-			<Option target="default" />
-		</Unit>
-		<Unit filename="..\..\test\FourSuite.h">
-			<Option compilerVar="CPP" />
-			<Option compile="0" />
-			<Option link="0" />
-			<Option target="default" />
-		</Unit>
-		<Unit filename="..\..\test\test.cpp">
-			<Option compilerVar="CPP" />
-			<Option target="default" />
-		</Unit>
+		<Unit filename="..\..\include\uriparser\Uri.h" />
+		<Unit filename="..\..\include\uriparser\UriBase.h" />
+		<Unit filename="..\..\include\uriparser\UriDefsAnsi.h" />
+		<Unit filename="..\..\include\uriparser\UriDefsConfig.h" />
+		<Unit filename="..\..\include\uriparser\UriDefsUnicode.h" />
+		<Unit filename="..\..\include\uriparser\UriIp4.h" />
+		<Unit filename="..\..\test\CppTest\collectoroutput.cpp" />
+		<Unit filename="..\..\test\CppTest\compileroutput.cpp" />
+		<Unit filename="..\..\test\CppTest\cpptest-assert.h" />
+		<Unit filename="..\..\test\CppTest\cpptest-collectoroutput.h" />
+		<Unit filename="..\..\test\CppTest\cpptest-compileroutput.h" />
+		<Unit filename="..\..\test\CppTest\cpptest-htmloutput.h" />
+		<Unit filename="..\..\test\CppTest\cpptest-output.h" />
+		<Unit filename="..\..\test\CppTest\cpptest-source.h" />
+		<Unit filename="..\..\test\CppTest\cpptest-suite.h" />
+		<Unit filename="..\..\test\CppTest\cpptest-textoutput.h" />
+		<Unit filename="..\..\test\CppTest\cpptest-time.h" />
+		<Unit filename="..\..\test\CppTest\cpptest.h" />
+		<Unit filename="..\..\test\CppTest\htmloutput.cpp" />
+		<Unit filename="..\..\test\CppTest\missing.cpp" />
+		<Unit filename="..\..\test\CppTest\missing.h" />
+		<Unit filename="..\..\test\CppTest\source.cpp" />
+		<Unit filename="..\..\test\CppTest\suite.cpp" />
+		<Unit filename="..\..\test\CppTest\textoutput.cpp" />
+		<Unit filename="..\..\test\CppTest\time.cpp" />
+		<Unit filename="..\..\test\CppTest\utils.cpp" />
+		<Unit filename="..\..\test\CppTest\utils.h" />
+		<Unit filename="..\..\test\CppTest\winconfig.h" />
+		<Unit filename="..\..\test\FourSuite.cpp" />
+		<Unit filename="..\..\test\FourSuite.h" />
+		<Unit filename="..\..\test\test.cpp" />
+		<Extensions>
+			<code_completion />
+		</Extensions>
 	</Project>
-</CodeBlocks_project_file>
\ No newline at end of file
+</CodeBlocks_project_file>
diff -Nru /tmp/bxdedfLB6u/uriparser-0.6.0/win32/Code_Blocks/uriparser.cbp /tmp/fLjZ2dz9P3/uriparser-0.7.4/win32/Code_Blocks/uriparser.cbp
--- uriparser-0.6.0/win32/Code_Blocks/uriparser.cbp	2007-09-12 18:53:22.000000000 +0100
+++ uriparser-0.7.4/win32/Code_Blocks/uriparser.cbp	2008-12-20 18:52:46.000000000 +0000
@@ -1,136 +1,81 @@
 <?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
 <CodeBlocks_project_file>
-	<FileVersion major="1" minor="4" />
+	<FileVersion major="1" minor="6" />
 	<Project>
 		<Option title="uriparser" />
 		<Option pch_mode="0" />
 		<Option compiler="gcc" />
 		<Build>
 			<Target title="default">
-				<Option output="..\liburiparser.a" />
+				<Option output="..\liburiparser.a" prefix_auto="0" extension_auto="0" />
 				<Option working_dir="" />
 				<Option type="2" />
 				<Option compiler="gcc" />
-				<Option includeInTargetAll="1" />
 			</Target>
 		</Build>
+		<VirtualTargets>
+			<Add alias="All" targets="default;" />
+		</VirtualTargets>
 		<Compiler>
 			<Add option="-pedantic" />
 			<Add option="-W" />
 			<Add option="-Wall" />
 			<Add directory="..\..\include" />
 		</Compiler>
-		<Unit filename="..\..\include\uriparser\Uri.h">
-			<Option compilerVar="CPP" />
-			<Option compile="0" />
-			<Option link="0" />
-			<Option target="default" />
-		</Unit>
-		<Unit filename="..\..\include\uriparser\UriBase.h">
-			<Option compilerVar="CPP" />
-			<Option compile="0" />
-			<Option link="0" />
-			<Option target="default" />
-		</Unit>
-		<Unit filename="..\..\include\uriparser\UriDefsAnsi.h">
-			<Option compilerVar="CPP" />
-			<Option compile="0" />
-			<Option link="0" />
-			<Option target="default" />
-		</Unit>
-		<Unit filename="..\..\include\uriparser\UriDefsConfig.h">
-			<Option compilerVar="CPP" />
-			<Option compile="0" />
-			<Option link="0" />
-			<Option target="default" />
-		</Unit>
-		<Unit filename="..\..\include\uriparser\UriDefsUnicode.h">
-			<Option compilerVar="CPP" />
-			<Option compile="0" />
-			<Option link="0" />
-			<Option target="default" />
-		</Unit>
-		<Unit filename="..\..\include\uriparser\UriIp4.h">
-			<Option compilerVar="CPP" />
-			<Option compile="0" />
-			<Option link="0" />
-			<Option target="default" />
-		</Unit>
+		<Unit filename="..\..\include\uriparser\Uri.h" />
+		<Unit filename="..\..\include\uriparser\UriBase.h" />
+		<Unit filename="..\..\include\uriparser\UriDefsAnsi.h" />
+		<Unit filename="..\..\include\uriparser\UriDefsConfig.h" />
+		<Unit filename="..\..\include\uriparser\UriDefsUnicode.h" />
+		<Unit filename="..\..\include\uriparser\UriIp4.h" />
 		<Unit filename="..\..\lib\UriCommon.c">
 			<Option compilerVar="CC" />
-			<Option target="default" />
-		</Unit>
-		<Unit filename="..\..\lib\UriCommon.h">
-			<Option compilerVar="CPP" />
-			<Option compile="0" />
-			<Option link="0" />
-			<Option target="default" />
 		</Unit>
+		<Unit filename="..\..\lib\UriCommon.h" />
 		<Unit filename="..\..\lib\UriCompare.c">
 			<Option compilerVar="CC" />
-			<Option target="default" />
 		</Unit>
 		<Unit filename="..\..\lib\UriEscape.c">
 			<Option compilerVar="CC" />
-			<Option target="default" />
 		</Unit>
 		<Unit filename="..\..\lib\UriFile.c">
 			<Option compilerVar="CC" />
-			<Option target="default" />
 		</Unit>
 		<Unit filename="..\..\lib\UriIp4.c">
 			<Option compilerVar="CC" />
-			<Option target="default" />
 		</Unit>
 		<Unit filename="..\..\lib\UriIp4Base.c">
 			<Option compilerVar="CC" />
-			<Option target="default" />
-		</Unit>
-		<Unit filename="..\..\lib\UriIp4Base.h">
-			<Option compilerVar="CPP" />
-			<Option compile="0" />
-			<Option link="0" />
-			<Option target="default" />
 		</Unit>
+		<Unit filename="..\..\lib\UriIp4Base.h" />
 		<Unit filename="..\..\lib\UriNormalize.c">
 			<Option compilerVar="CC" />
-			<Option target="default" />
 		</Unit>
 		<Unit filename="..\..\lib\UriNormalizeBase.c">
 			<Option compilerVar="CC" />
-			<Option target="default" />
-		</Unit>
-		<Unit filename="..\..\lib\UriNormalizeBase.h">
-			<Option compilerVar="CPP" />
-			<Option compile="0" />
-			<Option link="0" />
-			<Option target="default" />
 		</Unit>
+		<Unit filename="..\..\lib\UriNormalizeBase.h" />
 		<Unit filename="..\..\lib\UriParse.c">
 			<Option compilerVar="CC" />
-			<Option target="default" />
 		</Unit>
 		<Unit filename="..\..\lib\UriParseBase.c">
 			<Option compilerVar="CC" />
-			<Option target="default" />
 		</Unit>
-		<Unit filename="..\..\lib\UriParseBase.h">
-			<Option compilerVar="CPP" />
-			<Option compile="0" />
-			<Option link="0" />
-			<Option target="default" />
+		<Unit filename="..\..\lib\UriParseBase.h" />
+		<Unit filename="..\..\lib\UriQuery.c">
+			<Option compilerVar="CC" />
 		</Unit>
 		<Unit filename="..\..\lib\UriRecompose.c">
 			<Option compilerVar="CC" />
-			<Option target="default" />
 		</Unit>
 		<Unit filename="..\..\lib\UriResolve.c">
 			<Option compilerVar="CC" />
-			<Option target="default" />
 		</Unit>
 		<Unit filename="..\..\lib\UriShorten.c">
 			<Option compilerVar="CC" />
-			<Option target="default" />
 		</Unit>
+		<Extensions>
+			<code_completion />
+		</Extensions>
 	</Project>
-</CodeBlocks_project_file>
\ No newline at end of file
+</CodeBlocks_project_file>
diff -Nru /tmp/bxdedfLB6u/uriparser-0.6.0/win32/Code_Blocks/uriparser.workspace /tmp/fLjZ2dz9P3/uriparser-0.7.4/win32/Code_Blocks/uriparser.workspace
--- uriparser-0.6.0/win32/Code_Blocks/uriparser.workspace	1970-01-01 01:00:00.000000000 +0100
+++ uriparser-0.7.4/win32/Code_Blocks/uriparser.workspace	2008-12-20 18:52:46.000000000 +0000
@@ -0,0 +1,7 @@
+<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
+<CodeBlocks_workspace_file>
+	<Workspace title="Workspace">
+		<Project filename="uriparser.cbp" />
+		<Project filename="test.cbp" active="1" />
+	</Workspace>
+</CodeBlocks_workspace_file>
diff -Nru /tmp/bxdedfLB6u/uriparser-0.6.0/win32/MinGW/Makefile /tmp/fLjZ2dz9P3/uriparser-0.7.4/win32/MinGW/Makefile
--- uriparser-0.6.0/win32/MinGW/Makefile	1970-01-01 01:00:00.000000000 +0100
+++ uriparser-0.7.4/win32/MinGW/Makefile	2008-12-20 18:52:46.000000000 +0000
@@ -0,0 +1,77 @@
+# Makefile to compile uriparser with Mingw (4.2.1 for example).
+# To use with mingw32-make.exe while running in cmd.exe
+#
+# Copyright (C) 2008, Michael Anthony Puls II <shadow2531@gmail.com>
+# Copyright (C) 2008, Sebastian Pipping <webmaster@hartwork.org>
+# All rights reserved.
+#
+# Redistribution  and use in source and binary forms, with or without
+# modification,  are permitted provided that the following conditions
+# are met:
+#
+#     * Redistributions   of  source  code  must  retain  the   above
+#       copyright  notice, this list of conditions and the  following
+#       disclaimer.
+#
+#     * Redistributions  in  binary  form must  reproduce  the  above
+#       copyright  notice, this list of conditions and the  following
+#       disclaimer   in  the  documentation  and/or  other  materials
+#       provided with the distribution.
+#
+#     * Neither  the name of the <ORGANIZATION> nor the names of  its
+#       contributors  may  be  used to endorse  or  promote  products
+#       derived  from  this software without specific  prior  written
+#       permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS  IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT  NOT
+# LIMITED  TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND  FITNESS
+# FOR  A  PARTICULAR  PURPOSE ARE DISCLAIMED. IN NO EVENT  SHALL  THE
+# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL,    SPECIAL,   EXEMPLARY,   OR   CONSEQUENTIAL   DAMAGES
+# (INCLUDING,  BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+# SERVICES;  LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+# STRICT  LIABILITY,  OR  TORT (INCLUDING  NEGLIGENCE  OR  OTHERWISE)
+# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+# OF THE POSSIBILITY OF SUCH DAMAGE.
+#
+
+CFLAGS = -Wall -Wextra -O3 -s
+
+TEST_DIR = ../../test
+CPP_TEST_DIR = ../../test/CppTest
+LIB_DIR = ../../lib
+INCLUDE_DIR = ../../include
+WIN32_DIR = ..
+CC = gcc
+CXX = g++
+dos = $(subst /,\,$(1))
+
+URIPARSER_OBJECTS := $(patsubst %.c,%.o,$(wildcard $(LIB_DIR)/*.c))
+TEST_OBJECTS := $(patsubst %.cpp,%.o,$(wildcard $(CPP_TEST_DIR)/*.cpp)) \
+		$(patsubst %.cpp,%.o,$(wildcard $(TEST_DIR)/*.cpp))
+LIBRARY = $(WIN32_DIR)/liburiparser.a
+TEST_SUITE = $(WIN32_DIR)/test.exe
+
+$(LIBRARY): $(URIPARSER_OBJECTS)
+	ar rcs $(LIBRARY) $(URIPARSER_OBJECTS)
+
+$(URIPARSER_OBJECTS): %.o : %.c
+	$(CC) $(CFLAGS) -I$(INCLUDE_DIR) -o "$@" -c "$<"
+
+$(TEST_SUITE): $(LIBRARY) $(TEST_OBJECTS)
+	$(CXX) $(CFLAGS) -I$(INCLUDE_DIR) $(TEST_OBJECTS) \
+		-L$(WIN32_DIR) -luriparser -o $(TEST_SUITE)
+
+$(TEST_OBJECTS): %.o : %.cpp
+	$(CXX) $(CFLAGS) -I$(INCLUDE_DIR) -c "$<" -o "$@" 
+    
+all: $(LIBRARY)
+
+clean:
+	del $(call dos,$(URIPARSER_OBJECTS)) $(call dos,$(LIBRARY)) \
+		$(call dos,$(TEST_OBJECTS)) $(call dos,$(TEST_SUITE))
+
+check: $(TEST_SUITE)
+	$(TEST_SUITE)
diff -Nru /tmp/bxdedfLB6u/uriparser-0.6.0/win32/MinGW/Readme.txt /tmp/fLjZ2dz9P3/uriparser-0.7.4/win32/MinGW/Readme.txt
--- uriparser-0.6.0/win32/MinGW/Readme.txt	1970-01-01 01:00:00.000000000 +0100
+++ uriparser-0.7.4/win32/MinGW/Readme.txt	2008-12-20 18:52:46.000000000 +0000
@@ -0,0 +1,27 @@
+-- Building
+To build <win32\liburiparser.a> run:
+  mingw32-make.exe
+in this directory.
+
+To build and run the test suite (file <win32\test.exe>) run:
+  mingw32-make.exe check
+in this directory. 
+
+Alternatively, install MSYS <http://www.mingw.org/msys.shtml>, set
+it to use your MinGW distro during post-install and use ./configure in
+the root of this package to produce the Makefile. Then run make.
+
+
+-- Installation
+To install uriparser in your MinGW distro:
+1. Copy liburiparser.a to the MinGW lib directory.
+2. Copy the uriparser directory (in this package's include
+   directory) to the MinGW include directory.
+
+-- Hello world ŕ la uriparser
+To build a C program that uses liburiparser:
+gcc -Wall -Wextra example.c -o example -O3 -s -luriparser
+
+
+--------------------------------------------------------------
+Readme contributed by Michael Anthony Puls II.
diff -Nru /tmp/bxdedfLB6u/uriparser-0.6.0/win32/Visual_Studio_2005/uriparser.vcproj /tmp/fLjZ2dz9P3/uriparser-0.7.4/win32/Visual_Studio_2005/uriparser.vcproj
--- uriparser-0.6.0/win32/Visual_Studio_2005/uriparser.vcproj	2007-09-12 18:53:22.000000000 +0100
+++ uriparser-0.7.4/win32/Visual_Studio_2005/uriparser.vcproj	2008-12-20 18:52:46.000000000 +0000
@@ -237,6 +237,10 @@
 				>
 			</File>
 			<File
+				RelativePath="..\..\lib\UriQuery.c"
+				>
+			</File>
+			<File
 				RelativePath="..\..\lib\UriRecompose.c"
 				>
 			</File>