diff -Nru mobile-broadband-provider-info-20100407/aclocal.m4 mobile-broadband-provider-info-git.20100622t053426.75f8fc9/aclocal.m4 --- mobile-broadband-provider-info-20100407/aclocal.m4 2010-04-07 15:28:19.000000000 +0100 +++ mobile-broadband-provider-info-git.20100622t053426.75f8fc9/aclocal.m4 1970-01-01 01:00:00.000000000 +0100 @@ -1,618 +0,0 @@ -# generated automatically by aclocal 1.10.1 -*- Autoconf -*- - -# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, -# 2005, 2006, 2007, 2008 Free Software Foundation, Inc. -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY, to the extent permitted by law; without -# even the implied warranty of MERCHANTABILITY or FITNESS FOR A -# PARTICULAR PURPOSE. - -m4_ifndef([AC_AUTOCONF_VERSION], - [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl -m4_if(AC_AUTOCONF_VERSION, [2.61],, -[m4_warning([this file was generated for autoconf 2.61. -You have another version of autoconf. It may work, but is not guaranteed to. -If you have problems, you may need to regenerate the build system entirely. -To do so, use the procedure documented by the package, typically `autoreconf'.])]) - -# Copyright (C) 2002, 2003, 2005, 2006, 2007 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# AM_AUTOMAKE_VERSION(VERSION) -# ---------------------------- -# Automake X.Y traces this macro to ensure aclocal.m4 has been -# generated from the m4 files accompanying Automake X.Y. -# (This private macro should not be called outside this file.) -AC_DEFUN([AM_AUTOMAKE_VERSION], -[am__api_version='1.10' -dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to -dnl require some minimum version. Point them to the right macro. -m4_if([$1], [1.10.1], [], - [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl -]) - -# _AM_AUTOCONF_VERSION(VERSION) -# ----------------------------- -# aclocal traces this macro to find the Autoconf version. -# This is a private macro too. Using m4_define simplifies -# the logic in aclocal, which can simply ignore this definition. -m4_define([_AM_AUTOCONF_VERSION], []) - -# AM_SET_CURRENT_AUTOMAKE_VERSION -# ------------------------------- -# Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced. -# This function is AC_REQUIREd by AC_INIT_AUTOMAKE. -AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION], -[AM_AUTOMAKE_VERSION([1.10.1])dnl -m4_ifndef([AC_AUTOCONF_VERSION], - [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl -_AM_AUTOCONF_VERSION(AC_AUTOCONF_VERSION)]) - -# AM_AUX_DIR_EXPAND -*- Autoconf -*- - -# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets -# $ac_aux_dir to `$srcdir/foo'. In other projects, it is set to -# `$srcdir', `$srcdir/..', or `$srcdir/../..'. -# -# Of course, Automake must honor this variable whenever it calls a -# tool from the auxiliary directory. The problem is that $srcdir (and -# therefore $ac_aux_dir as well) can be either absolute or relative, -# depending on how configure is run. This is pretty annoying, since -# it makes $ac_aux_dir quite unusable in subdirectories: in the top -# source directory, any form will work fine, but in subdirectories a -# relative path needs to be adjusted first. -# -# $ac_aux_dir/missing -# fails when called from a subdirectory if $ac_aux_dir is relative -# $top_srcdir/$ac_aux_dir/missing -# fails if $ac_aux_dir is absolute, -# fails when called from a subdirectory in a VPATH build with -# a relative $ac_aux_dir -# -# The reason of the latter failure is that $top_srcdir and $ac_aux_dir -# are both prefixed by $srcdir. In an in-source build this is usually -# harmless because $srcdir is `.', but things will broke when you -# start a VPATH build or use an absolute $srcdir. -# -# So we could use something similar to $top_srcdir/$ac_aux_dir/missing, -# iff we strip the leading $srcdir from $ac_aux_dir. That would be: -# am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"` -# and then we would define $MISSING as -# MISSING="\${SHELL} $am_aux_dir/missing" -# This will work as long as MISSING is not called from configure, because -# unfortunately $(top_srcdir) has no meaning in configure. -# However there are other variables, like CC, which are often used in -# configure, and could therefore not use this "fixed" $ac_aux_dir. -# -# Another solution, used here, is to always expand $ac_aux_dir to an -# absolute PATH. The drawback is that using absolute paths prevent a -# configured tree to be moved without reconfiguration. - -AC_DEFUN([AM_AUX_DIR_EXPAND], -[dnl Rely on autoconf to set up CDPATH properly. -AC_PREREQ([2.50])dnl -# expand $ac_aux_dir to an absolute path -am_aux_dir=`cd $ac_aux_dir && pwd` -]) - -# AM_CONDITIONAL -*- Autoconf -*- - -# Copyright (C) 1997, 2000, 2001, 2003, 2004, 2005, 2006 -# Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# serial 8 - -# AM_CONDITIONAL(NAME, SHELL-CONDITION) -# ------------------------------------- -# Define a conditional. -AC_DEFUN([AM_CONDITIONAL], -[AC_PREREQ(2.52)dnl - ifelse([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])], - [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl -AC_SUBST([$1_TRUE])dnl -AC_SUBST([$1_FALSE])dnl -_AM_SUBST_NOTMAKE([$1_TRUE])dnl -_AM_SUBST_NOTMAKE([$1_FALSE])dnl -if $2; then - $1_TRUE= - $1_FALSE='#' -else - $1_TRUE='#' - $1_FALSE= -fi -AC_CONFIG_COMMANDS_PRE( -[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then - AC_MSG_ERROR([[conditional "$1" was never defined. -Usually this means the macro was only invoked conditionally.]]) -fi])]) - -# Do all the work for Automake. -*- Autoconf -*- - -# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, -# 2005, 2006, 2008 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# serial 13 - -# This macro actually does too much. Some checks are only needed if -# your package does certain things. But this isn't really a big deal. - -# AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE]) -# AM_INIT_AUTOMAKE([OPTIONS]) -# ----------------------------------------------- -# The call with PACKAGE and VERSION arguments is the old style -# call (pre autoconf-2.50), which is being phased out. PACKAGE -# and VERSION should now be passed to AC_INIT and removed from -# the call to AM_INIT_AUTOMAKE. -# We support both call styles for the transition. After -# the next Automake release, Autoconf can make the AC_INIT -# arguments mandatory, and then we can depend on a new Autoconf -# release and drop the old call support. -AC_DEFUN([AM_INIT_AUTOMAKE], -[AC_PREREQ([2.60])dnl -dnl Autoconf wants to disallow AM_ names. We explicitly allow -dnl the ones we care about. -m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl -AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl -AC_REQUIRE([AC_PROG_INSTALL])dnl -if test "`cd $srcdir && pwd`" != "`pwd`"; then - # Use -I$(srcdir) only when $(srcdir) != ., so that make's output - # is not polluted with repeated "-I." - AC_SUBST([am__isrc], [' -I$(srcdir)'])_AM_SUBST_NOTMAKE([am__isrc])dnl - # test to see if srcdir already configured - if test -f $srcdir/config.status; then - AC_MSG_ERROR([source directory already configured; run "make distclean" there first]) - fi -fi - -# test whether we have cygpath -if test -z "$CYGPATH_W"; then - if (cygpath --version) >/dev/null 2>/dev/null; then - CYGPATH_W='cygpath -w' - else - CYGPATH_W=echo - fi -fi -AC_SUBST([CYGPATH_W]) - -# Define the identity of the package. -dnl Distinguish between old-style and new-style calls. -m4_ifval([$2], -[m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl - AC_SUBST([PACKAGE], [$1])dnl - AC_SUBST([VERSION], [$2])], -[_AM_SET_OPTIONS([$1])dnl -dnl Diagnose old-style AC_INIT with new-style AM_AUTOMAKE_INIT. -m4_if(m4_ifdef([AC_PACKAGE_NAME], 1)m4_ifdef([AC_PACKAGE_VERSION], 1), 11,, - [m4_fatal([AC_INIT should be called with package and version arguments])])dnl - AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl - AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl - -_AM_IF_OPTION([no-define],, -[AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package]) - AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])])dnl - -# Some tools Automake needs. -AC_REQUIRE([AM_SANITY_CHECK])dnl -AC_REQUIRE([AC_ARG_PROGRAM])dnl -AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version}) -AM_MISSING_PROG(AUTOCONF, autoconf) -AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version}) -AM_MISSING_PROG(AUTOHEADER, autoheader) -AM_MISSING_PROG(MAKEINFO, makeinfo) -AM_PROG_INSTALL_SH -AM_PROG_INSTALL_STRIP -AC_REQUIRE([AM_PROG_MKDIR_P])dnl -# We need awk for the "check" target. The system "awk" is bad on -# some platforms. -AC_REQUIRE([AC_PROG_AWK])dnl -AC_REQUIRE([AC_PROG_MAKE_SET])dnl -AC_REQUIRE([AM_SET_LEADING_DOT])dnl -_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])], - [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])], - [_AM_PROG_TAR([v7])])]) -_AM_IF_OPTION([no-dependencies],, -[AC_PROVIDE_IFELSE([AC_PROG_CC], - [_AM_DEPENDENCIES(CC)], - [define([AC_PROG_CC], - defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl -AC_PROVIDE_IFELSE([AC_PROG_CXX], - [_AM_DEPENDENCIES(CXX)], - [define([AC_PROG_CXX], - defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl -AC_PROVIDE_IFELSE([AC_PROG_OBJC], - [_AM_DEPENDENCIES(OBJC)], - [define([AC_PROG_OBJC], - defn([AC_PROG_OBJC])[_AM_DEPENDENCIES(OBJC)])])dnl -]) -]) - - -# When config.status generates a header, we must update the stamp-h file. -# This file resides in the same directory as the config header -# that is generated. The stamp files are numbered to have different names. - -# Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the -# loop where config.status creates the headers, so we can generate -# our stamp files there. -AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK], -[# Compute $1's index in $config_headers. -_am_arg=$1 -_am_stamp_count=1 -for _am_header in $config_headers :; do - case $_am_header in - $_am_arg | $_am_arg:* ) - break ;; - * ) - _am_stamp_count=`expr $_am_stamp_count + 1` ;; - esac -done -echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count]) - -# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# AM_PROG_INSTALL_SH -# ------------------ -# Define $install_sh. -AC_DEFUN([AM_PROG_INSTALL_SH], -[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl -install_sh=${install_sh-"\$(SHELL) $am_aux_dir/install-sh"} -AC_SUBST(install_sh)]) - -# Copyright (C) 2003, 2005 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# serial 2 - -# Check whether the underlying file-system supports filenames -# with a leading dot. For instance MS-DOS doesn't. -AC_DEFUN([AM_SET_LEADING_DOT], -[rm -rf .tst 2>/dev/null -mkdir .tst 2>/dev/null -if test -d .tst; then - am__leading_dot=. -else - am__leading_dot=_ -fi -rmdir .tst 2>/dev/null -AC_SUBST([am__leading_dot])]) - -# Add --enable-maintainer-mode option to configure. -*- Autoconf -*- -# From Jim Meyering - -# Copyright (C) 1996, 1998, 2000, 2001, 2002, 2003, 2004, 2005 -# Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# serial 4 - -AC_DEFUN([AM_MAINTAINER_MODE], -[AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles]) - dnl maintainer-mode is disabled by default - AC_ARG_ENABLE(maintainer-mode, -[ --enable-maintainer-mode enable make rules and dependencies not useful - (and sometimes confusing) to the casual installer], - USE_MAINTAINER_MODE=$enableval, - USE_MAINTAINER_MODE=no) - AC_MSG_RESULT([$USE_MAINTAINER_MODE]) - AM_CONDITIONAL(MAINTAINER_MODE, [test $USE_MAINTAINER_MODE = yes]) - MAINT=$MAINTAINER_MODE_TRUE - AC_SUBST(MAINT)dnl -] -) - -AU_DEFUN([jm_MAINTAINER_MODE], [AM_MAINTAINER_MODE]) - -# Fake the existence of programs that GNU maintainers use. -*- Autoconf -*- - -# Copyright (C) 1997, 1999, 2000, 2001, 2003, 2004, 2005 -# Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# serial 5 - -# AM_MISSING_PROG(NAME, PROGRAM) -# ------------------------------ -AC_DEFUN([AM_MISSING_PROG], -[AC_REQUIRE([AM_MISSING_HAS_RUN]) -$1=${$1-"${am_missing_run}$2"} -AC_SUBST($1)]) - - -# AM_MISSING_HAS_RUN -# ------------------ -# Define MISSING if not defined so far and test if it supports --run. -# If it does, set am_missing_run to use it, otherwise, to nothing. -AC_DEFUN([AM_MISSING_HAS_RUN], -[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl -AC_REQUIRE_AUX_FILE([missing])dnl -test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing" -# Use eval to expand $SHELL -if eval "$MISSING --run true"; then - am_missing_run="$MISSING --run " -else - am_missing_run= - AC_MSG_WARN([`missing' script is too old or missing]) -fi -]) - -# Copyright (C) 2003, 2004, 2005, 2006 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# AM_PROG_MKDIR_P -# --------------- -# Check for `mkdir -p'. -AC_DEFUN([AM_PROG_MKDIR_P], -[AC_PREREQ([2.60])dnl -AC_REQUIRE([AC_PROG_MKDIR_P])dnl -dnl Automake 1.8 to 1.9.6 used to define mkdir_p. We now use MKDIR_P, -dnl while keeping a definition of mkdir_p for backward compatibility. -dnl @MKDIR_P@ is magic: AC_OUTPUT adjusts its value for each Makefile. -dnl However we cannot define mkdir_p as $(MKDIR_P) for the sake of -dnl Makefile.ins that do not define MKDIR_P, so we do our own -dnl adjustment using top_builddir (which is defined more often than -dnl MKDIR_P). -AC_SUBST([mkdir_p], ["$MKDIR_P"])dnl -case $mkdir_p in - [[\\/$]]* | ?:[[\\/]]*) ;; - */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;; -esac -]) - -# Helper functions for option handling. -*- Autoconf -*- - -# Copyright (C) 2001, 2002, 2003, 2005 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# serial 3 - -# _AM_MANGLE_OPTION(NAME) -# ----------------------- -AC_DEFUN([_AM_MANGLE_OPTION], -[[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])]) - -# _AM_SET_OPTION(NAME) -# ------------------------------ -# Set option NAME. Presently that only means defining a flag for this option. -AC_DEFUN([_AM_SET_OPTION], -[m4_define(_AM_MANGLE_OPTION([$1]), 1)]) - -# _AM_SET_OPTIONS(OPTIONS) -# ---------------------------------- -# OPTIONS is a space-separated list of Automake options. -AC_DEFUN([_AM_SET_OPTIONS], -[AC_FOREACH([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])]) - -# _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET]) -# ------------------------------------------- -# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise. -AC_DEFUN([_AM_IF_OPTION], -[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])]) - -# Check to make sure that the build environment is sane. -*- Autoconf -*- - -# Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005 -# Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# serial 4 - -# AM_SANITY_CHECK -# --------------- -AC_DEFUN([AM_SANITY_CHECK], -[AC_MSG_CHECKING([whether build environment is sane]) -# Just in case -sleep 1 -echo timestamp > conftest.file -# Do `set' in a subshell so we don't clobber the current shell's -# arguments. Must try -L first in case configure is actually a -# symlink; some systems play weird games with the mod time of symlinks -# (eg FreeBSD returns the mod time of the symlink's containing -# directory). -if ( - set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null` - if test "$[*]" = "X"; then - # -L didn't work. - set X `ls -t $srcdir/configure conftest.file` - fi - rm -f conftest.file - if test "$[*]" != "X $srcdir/configure conftest.file" \ - && test "$[*]" != "X conftest.file $srcdir/configure"; then - - # If neither matched, then we have a broken ls. This can happen - # if, for instance, CONFIG_SHELL is bash and it inherits a - # broken ls alias from the environment. This has actually - # happened. Such a system could not be considered "sane". - AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken -alias in your environment]) - fi - - test "$[2]" = conftest.file - ) -then - # Ok. - : -else - AC_MSG_ERROR([newly created file is older than distributed files! -Check your system clock]) -fi -AC_MSG_RESULT(yes)]) - -# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# AM_PROG_INSTALL_STRIP -# --------------------- -# One issue with vendor `install' (even GNU) is that you can't -# specify the program used to strip binaries. This is especially -# annoying in cross-compiling environments, where the build's strip -# is unlikely to handle the host's binaries. -# Fortunately install-sh will honor a STRIPPROG variable, so we -# always use install-sh in `make install-strip', and initialize -# STRIPPROG with the value of the STRIP variable (set by the user). -AC_DEFUN([AM_PROG_INSTALL_STRIP], -[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl -# Installed binaries are usually stripped using `strip' when the user -# run `make install-strip'. However `strip' might not be the right -# tool to use in cross-compilation environments, therefore Automake -# will honor the `STRIP' environment variable to overrule this program. -dnl Don't test for $cross_compiling = yes, because it might be `maybe'. -if test "$cross_compiling" != no; then - AC_CHECK_TOOL([STRIP], [strip], :) -fi -INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s" -AC_SUBST([INSTALL_STRIP_PROGRAM])]) - -# Copyright (C) 2006 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# _AM_SUBST_NOTMAKE(VARIABLE) -# --------------------------- -# Prevent Automake from outputting VARIABLE = @VARIABLE@ in Makefile.in. -# This macro is traced by Automake. -AC_DEFUN([_AM_SUBST_NOTMAKE]) - -# Check how to create a tarball. -*- Autoconf -*- - -# Copyright (C) 2004, 2005 Free Software Foundation, Inc. -# -# This file is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# serial 2 - -# _AM_PROG_TAR(FORMAT) -# -------------------- -# Check how to create a tarball in format FORMAT. -# FORMAT should be one of `v7', `ustar', or `pax'. -# -# Substitute a variable $(am__tar) that is a command -# writing to stdout a FORMAT-tarball containing the directory -# $tardir. -# tardir=directory && $(am__tar) > result.tar -# -# Substitute a variable $(am__untar) that extract such -# a tarball read from stdin. -# $(am__untar) < result.tar -AC_DEFUN([_AM_PROG_TAR], -[# Always define AMTAR for backward compatibility. -AM_MISSING_PROG([AMTAR], [tar]) -m4_if([$1], [v7], - [am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'], - [m4_case([$1], [ustar],, [pax],, - [m4_fatal([Unknown tar format])]) -AC_MSG_CHECKING([how to create a $1 tar archive]) -# Loop over all known methods to create a tar archive until one works. -_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none' -_am_tools=${am_cv_prog_tar_$1-$_am_tools} -# Do not fold the above two line into one, because Tru64 sh and -# Solaris sh will not grok spaces in the rhs of `-'. -for _am_tool in $_am_tools -do - case $_am_tool in - gnutar) - for _am_tar in tar gnutar gtar; - do - AM_RUN_LOG([$_am_tar --version]) && break - done - am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"' - am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"' - am__untar="$_am_tar -xf -" - ;; - plaintar) - # Must skip GNU tar: if it does not support --format= it doesn't create - # ustar tarball either. - (tar --version) >/dev/null 2>&1 && continue - am__tar='tar chf - "$$tardir"' - am__tar_='tar chf - "$tardir"' - am__untar='tar xf -' - ;; - pax) - am__tar='pax -L -x $1 -w "$$tardir"' - am__tar_='pax -L -x $1 -w "$tardir"' - am__untar='pax -r' - ;; - cpio) - am__tar='find "$$tardir" -print | cpio -o -H $1 -L' - am__tar_='find "$tardir" -print | cpio -o -H $1 -L' - am__untar='cpio -i -H $1 -d' - ;; - none) - am__tar=false - am__tar_=false - am__untar=false - ;; - esac - - # If the value was cached, stop now. We just wanted to have am__tar - # and am__untar set. - test -n "${am_cv_prog_tar_$1}" && break - - # tar/untar a dummy directory, and stop if the command works - rm -rf conftest.dir - mkdir conftest.dir - echo GrepMe > conftest.dir/file - AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar]) - rm -rf conftest.dir - if test -s conftest.tar; then - AM_RUN_LOG([$am__untar /dev/null 2>&1 && break - fi -done -rm -rf conftest.dir - -AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool]) -AC_MSG_RESULT([$am_cv_prog_tar_$1])]) -AC_SUBST([am__tar]) -AC_SUBST([am__untar]) -]) # _AM_PROG_TAR - diff -Nru mobile-broadband-provider-info-20100407/configure mobile-broadband-provider-info-git.20100622t053426.75f8fc9/configure --- mobile-broadband-provider-info-20100407/configure 2010-04-07 15:28:19.000000000 +0100 +++ mobile-broadband-provider-info-git.20100622t053426.75f8fc9/configure 1970-01-01 01:00:00.000000000 +0100 @@ -1,3204 +0,0 @@ -#! /bin/sh -# Guess values for system-dependent variables and create Makefiles. -# Generated by GNU Autoconf 2.61 for mobile-broadband-provider-info 20100122. -# -# Report bugs to . -# -# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, -# 2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc. -# This configure script is free software; the Free Software Foundation -# gives unlimited permission to copy, distribute and modify it. -## --------------------- ## -## M4sh Initialization. ## -## --------------------- ## - -# Be more Bourne compatible -DUALCASE=1; export DUALCASE # for MKS sh -if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then - emulate sh - NULLCMD=: - # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which - # is contrary to our usage. Disable this feature. - alias -g '${1+"$@"}'='"$@"' - setopt NO_GLOB_SUBST -else - case `(set -o) 2>/dev/null` in - *posix*) set -o posix ;; -esac - -fi - - - - -# PATH needs CR -# Avoid depending upon Character Ranges. -as_cr_letters='abcdefghijklmnopqrstuvwxyz' -as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' -as_cr_Letters=$as_cr_letters$as_cr_LETTERS -as_cr_digits='0123456789' -as_cr_alnum=$as_cr_Letters$as_cr_digits - -# The user is always right. -if test "${PATH_SEPARATOR+set}" != set; then - echo "#! /bin/sh" >conf$$.sh - echo "exit 0" >>conf$$.sh - chmod +x conf$$.sh - if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then - PATH_SEPARATOR=';' - else - PATH_SEPARATOR=: - fi - rm -f conf$$.sh -fi - -# Support unset when possible. -if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then - as_unset=unset -else - as_unset=false -fi - - -# IFS -# We need space, tab and new line, in precisely that order. Quoting is -# there to prevent editors from complaining about space-tab. -# (If _AS_PATH_WALK were called with IFS unset, it would disable word -# splitting by setting IFS to empty value.) -as_nl=' -' -IFS=" "" $as_nl" - -# Find who we are. Look in the path if we contain no directory separator. -case $0 in - *[\\/]* ) as_myself=$0 ;; - *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break -done -IFS=$as_save_IFS - - ;; -esac -# We did not find ourselves, most probably we were run as `sh COMMAND' -# in which case we are not to be found in the path. -if test "x$as_myself" = x; then - as_myself=$0 -fi -if test ! -f "$as_myself"; then - echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 - { (exit 1); exit 1; } -fi - -# Work around bugs in pre-3.0 UWIN ksh. -for as_var in ENV MAIL MAILPATH -do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var -done -PS1='$ ' -PS2='> ' -PS4='+ ' - -# NLS nuisances. -for as_var in \ - LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \ - LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \ - LC_TELEPHONE LC_TIME -do - if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then - eval $as_var=C; export $as_var - else - ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var - fi -done - -# Required to use basename. -if expr a : '\(a\)' >/dev/null 2>&1 && - test "X`expr 00001 : '.*\(...\)'`" = X001; then - as_expr=expr -else - as_expr=false -fi - -if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then - as_basename=basename -else - as_basename=false -fi - - -# Name of the executable. -as_me=`$as_basename -- "$0" || -$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ - X"$0" : 'X\(//\)$' \| \ - X"$0" : 'X\(/\)' \| . 2>/dev/null || -echo X/"$0" | - sed '/^.*\/\([^/][^/]*\)\/*$/{ - s//\1/ - q - } - /^X\/\(\/\/\)$/{ - s//\1/ - q - } - /^X\/\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - -# CDPATH. -$as_unset CDPATH - - -if test "x$CONFIG_SHELL" = x; then - if (eval ":") 2>/dev/null; then - as_have_required=yes -else - as_have_required=no -fi - - if test $as_have_required = yes && (eval ": -(as_func_return () { - (exit \$1) -} -as_func_success () { - as_func_return 0 -} -as_func_failure () { - as_func_return 1 -} -as_func_ret_success () { - return 0 -} -as_func_ret_failure () { - return 1 -} - -exitcode=0 -if as_func_success; then - : -else - exitcode=1 - echo as_func_success failed. -fi - -if as_func_failure; then - exitcode=1 - echo as_func_failure succeeded. -fi - -if as_func_ret_success; then - : -else - exitcode=1 - echo as_func_ret_success failed. -fi - -if as_func_ret_failure; then - exitcode=1 - echo as_func_ret_failure succeeded. -fi - -if ( set x; as_func_ret_success y && test x = \"\$1\" ); then - : -else - exitcode=1 - echo positional parameters were not saved. -fi - -test \$exitcode = 0) || { (exit 1); exit 1; } - -( - as_lineno_1=\$LINENO - as_lineno_2=\$LINENO - test \"x\$as_lineno_1\" != \"x\$as_lineno_2\" && - test \"x\`expr \$as_lineno_1 + 1\`\" = \"x\$as_lineno_2\") || { (exit 1); exit 1; } -") 2> /dev/null; then - : -else - as_candidate_shells= - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - case $as_dir in - /*) - for as_base in sh bash ksh sh5; do - as_candidate_shells="$as_candidate_shells $as_dir/$as_base" - done;; - esac -done -IFS=$as_save_IFS - - - for as_shell in $as_candidate_shells $SHELL; do - # Try only shells that exist, to save several forks. - if { test -f "$as_shell" || test -f "$as_shell.exe"; } && - { ("$as_shell") 2> /dev/null <<\_ASEOF -if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then - emulate sh - NULLCMD=: - # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which - # is contrary to our usage. Disable this feature. - alias -g '${1+"$@"}'='"$@"' - setopt NO_GLOB_SUBST -else - case `(set -o) 2>/dev/null` in - *posix*) set -o posix ;; -esac - -fi - - -: -_ASEOF -}; then - CONFIG_SHELL=$as_shell - as_have_required=yes - if { "$as_shell" 2> /dev/null <<\_ASEOF -if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then - emulate sh - NULLCMD=: - # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which - # is contrary to our usage. Disable this feature. - alias -g '${1+"$@"}'='"$@"' - setopt NO_GLOB_SUBST -else - case `(set -o) 2>/dev/null` in - *posix*) set -o posix ;; -esac - -fi - - -: -(as_func_return () { - (exit $1) -} -as_func_success () { - as_func_return 0 -} -as_func_failure () { - as_func_return 1 -} -as_func_ret_success () { - return 0 -} -as_func_ret_failure () { - return 1 -} - -exitcode=0 -if as_func_success; then - : -else - exitcode=1 - echo as_func_success failed. -fi - -if as_func_failure; then - exitcode=1 - echo as_func_failure succeeded. -fi - -if as_func_ret_success; then - : -else - exitcode=1 - echo as_func_ret_success failed. -fi - -if as_func_ret_failure; then - exitcode=1 - echo as_func_ret_failure succeeded. -fi - -if ( set x; as_func_ret_success y && test x = "$1" ); then - : -else - exitcode=1 - echo positional parameters were not saved. -fi - -test $exitcode = 0) || { (exit 1); exit 1; } - -( - as_lineno_1=$LINENO - as_lineno_2=$LINENO - test "x$as_lineno_1" != "x$as_lineno_2" && - test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2") || { (exit 1); exit 1; } - -_ASEOF -}; then - break -fi - -fi - - done - - if test "x$CONFIG_SHELL" != x; then - for as_var in BASH_ENV ENV - do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var - done - export CONFIG_SHELL - exec "$CONFIG_SHELL" "$as_myself" ${1+"$@"} -fi - - - if test $as_have_required = no; then - echo This script requires a shell more modern than all the - echo shells that I found on your system. Please install a - echo modern shell, or manually run the script under such a - echo shell if you do have one. - { (exit 1); exit 1; } -fi - - -fi - -fi - - - -(eval "as_func_return () { - (exit \$1) -} -as_func_success () { - as_func_return 0 -} -as_func_failure () { - as_func_return 1 -} -as_func_ret_success () { - return 0 -} -as_func_ret_failure () { - return 1 -} - -exitcode=0 -if as_func_success; then - : -else - exitcode=1 - echo as_func_success failed. -fi - -if as_func_failure; then - exitcode=1 - echo as_func_failure succeeded. -fi - -if as_func_ret_success; then - : -else - exitcode=1 - echo as_func_ret_success failed. -fi - -if as_func_ret_failure; then - exitcode=1 - echo as_func_ret_failure succeeded. -fi - -if ( set x; as_func_ret_success y && test x = \"\$1\" ); then - : -else - exitcode=1 - echo positional parameters were not saved. -fi - -test \$exitcode = 0") || { - echo No shell found that supports shell functions. - echo Please tell autoconf@gnu.org about your system, - echo including any error possibly output before this - echo message -} - - - - as_lineno_1=$LINENO - as_lineno_2=$LINENO - test "x$as_lineno_1" != "x$as_lineno_2" && - test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || { - - # Create $as_me.lineno as a copy of $as_myself, but with $LINENO - # uniformly replaced by the line number. The first 'sed' inserts a - # line-number line after each line using $LINENO; the second 'sed' - # does the real work. The second script uses 'N' to pair each - # line-number line with the line containing $LINENO, and appends - # trailing '-' during substitution so that $LINENO is not a special - # case at line end. - # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the - # scripts with optimization help from Paolo Bonzini. Blame Lee - # E. McMahon (1931-1989) for sed's syntax. :-) - sed -n ' - p - /[$]LINENO/= - ' <$as_myself | - sed ' - s/[$]LINENO.*/&-/ - t lineno - b - :lineno - N - :loop - s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/ - t loop - s/-\n.*// - ' >$as_me.lineno && - chmod +x "$as_me.lineno" || - { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2 - { (exit 1); exit 1; }; } - - # Don't try to exec as it changes $[0], causing all sort of problems - # (the dirname of $[0] is not the place where we might find the - # original and so on. Autoconf is especially sensitive to this). - . "./$as_me.lineno" - # Exit status is that of the last command. - exit -} - - -if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then - as_dirname=dirname -else - as_dirname=false -fi - -ECHO_C= ECHO_N= ECHO_T= -case `echo -n x` in --n*) - case `echo 'x\c'` in - *c*) ECHO_T=' ';; # ECHO_T is single tab character. - *) ECHO_C='\c';; - esac;; -*) - ECHO_N='-n';; -esac - -if expr a : '\(a\)' >/dev/null 2>&1 && - test "X`expr 00001 : '.*\(...\)'`" = X001; then - as_expr=expr -else - as_expr=false -fi - -rm -f conf$$ conf$$.exe conf$$.file -if test -d conf$$.dir; then - rm -f conf$$.dir/conf$$.file -else - rm -f conf$$.dir - mkdir conf$$.dir -fi -echo >conf$$.file -if ln -s conf$$.file conf$$ 2>/dev/null; then - as_ln_s='ln -s' - # ... but there are two gotchas: - # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. - # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. - # In both cases, we have to default to `cp -p'. - ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || - as_ln_s='cp -p' -elif ln conf$$.file conf$$ 2>/dev/null; then - as_ln_s=ln -else - as_ln_s='cp -p' -fi -rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file -rmdir conf$$.dir 2>/dev/null - -if mkdir -p . 2>/dev/null; then - as_mkdir_p=: -else - test -d ./-p && rmdir ./-p - as_mkdir_p=false -fi - -if test -x / >/dev/null 2>&1; then - as_test_x='test -x' -else - if ls -dL / >/dev/null 2>&1; then - as_ls_L_option=L - else - as_ls_L_option= - fi - as_test_x=' - eval sh -c '\'' - if test -d "$1"; then - test -d "$1/."; - else - case $1 in - -*)set "./$1";; - esac; - case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in - ???[sx]*):;;*)false;;esac;fi - '\'' sh - ' -fi -as_executable_p=$as_test_x - -# Sed expression to map a string onto a valid CPP name. -as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" - -# Sed expression to map a string onto a valid variable name. -as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" - - - -exec 7<&0 &1 - -# Name of the host. -# hostname on some systems (SVR3.2, Linux) returns a bogus exit status, -# so uname gets run too. -ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q` - -# -# Initializations. -# -ac_default_prefix=/usr/local -ac_clean_files= -ac_config_libobj_dir=. -LIBOBJS= -cross_compiling=no -subdirs= -MFLAGS= -MAKEFLAGS= -SHELL=${CONFIG_SHELL-/bin/sh} - -# Identity of this package. -PACKAGE_NAME='mobile-broadband-provider-info' -PACKAGE_TARNAME='mobile-broadband-provider-info' -PACKAGE_VERSION='20100122' -PACKAGE_STRING='mobile-broadband-provider-info 20100122' -PACKAGE_BUGREPORT='dcbw@redhat.com' - -ac_subst_vars='SHELL -PATH_SEPARATOR -PACKAGE_NAME -PACKAGE_TARNAME -PACKAGE_VERSION -PACKAGE_STRING -PACKAGE_BUGREPORT -exec_prefix -prefix -program_transform_name -bindir -sbindir -libexecdir -datarootdir -datadir -sysconfdir -sharedstatedir -localstatedir -includedir -oldincludedir -docdir -infodir -htmldir -dvidir -pdfdir -psdir -libdir -localedir -mandir -DEFS -ECHO_C -ECHO_N -ECHO_T -LIBS -build_alias -host_alias -target_alias -INSTALL_PROGRAM -INSTALL_SCRIPT -INSTALL_DATA -am__isrc -CYGPATH_W -PACKAGE -VERSION -ACLOCAL -AUTOCONF -AUTOMAKE -AUTOHEADER -MAKEINFO -install_sh -STRIP -INSTALL_STRIP_PROGRAM -mkdir_p -AWK -SET_MAKE -am__leading_dot -AMTAR -am__tar -am__untar -MAINTAINER_MODE_TRUE -MAINTAINER_MODE_FALSE -MAINT -LIBOBJS -LTLIBOBJS' -ac_subst_files='' - ac_precious_vars='build_alias -host_alias -target_alias' - - -# Initialize some variables set by options. -ac_init_help= -ac_init_version=false -# The variables have the same names as the options, with -# dashes changed to underlines. -cache_file=/dev/null -exec_prefix=NONE -no_create= -no_recursion= -prefix=NONE -program_prefix=NONE -program_suffix=NONE -program_transform_name=s,x,x, -silent= -site= -srcdir= -verbose= -x_includes=NONE -x_libraries=NONE - -# Installation directory options. -# These are left unexpanded so users can "make install exec_prefix=/foo" -# and all the variables that are supposed to be based on exec_prefix -# by default will actually change. -# Use braces instead of parens because sh, perl, etc. also accept them. -# (The list follows the same order as the GNU Coding Standards.) -bindir='${exec_prefix}/bin' -sbindir='${exec_prefix}/sbin' -libexecdir='${exec_prefix}/libexec' -datarootdir='${prefix}/share' -datadir='${datarootdir}' -sysconfdir='${prefix}/etc' -sharedstatedir='${prefix}/com' -localstatedir='${prefix}/var' -includedir='${prefix}/include' -oldincludedir='/usr/include' -docdir='${datarootdir}/doc/${PACKAGE_TARNAME}' -infodir='${datarootdir}/info' -htmldir='${docdir}' -dvidir='${docdir}' -pdfdir='${docdir}' -psdir='${docdir}' -libdir='${exec_prefix}/lib' -localedir='${datarootdir}/locale' -mandir='${datarootdir}/man' - -ac_prev= -ac_dashdash= -for ac_option -do - # If the previous option needs an argument, assign it. - if test -n "$ac_prev"; then - eval $ac_prev=\$ac_option - ac_prev= - continue - fi - - case $ac_option in - *=*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;; - *) ac_optarg=yes ;; - esac - - # Accept the important Cygnus configure options, so we can diagnose typos. - - case $ac_dashdash$ac_option in - --) - ac_dashdash=yes ;; - - -bindir | --bindir | --bindi | --bind | --bin | --bi) - ac_prev=bindir ;; - -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*) - bindir=$ac_optarg ;; - - -build | --build | --buil | --bui | --bu) - ac_prev=build_alias ;; - -build=* | --build=* | --buil=* | --bui=* | --bu=*) - build_alias=$ac_optarg ;; - - -cache-file | --cache-file | --cache-fil | --cache-fi \ - | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c) - ac_prev=cache_file ;; - -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \ - | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*) - cache_file=$ac_optarg ;; - - --config-cache | -C) - cache_file=config.cache ;; - - -datadir | --datadir | --datadi | --datad) - ac_prev=datadir ;; - -datadir=* | --datadir=* | --datadi=* | --datad=*) - datadir=$ac_optarg ;; - - -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \ - | --dataroo | --dataro | --datar) - ac_prev=datarootdir ;; - -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \ - | --dataroot=* | --dataroo=* | --dataro=* | --datar=*) - datarootdir=$ac_optarg ;; - - -disable-* | --disable-*) - ac_feature=`expr "x$ac_option" : 'x-*disable-\(.*\)'` - # Reject names that are not valid shell variable names. - expr "x$ac_feature" : ".*[^-._$as_cr_alnum]" >/dev/null && - { echo "$as_me: error: invalid feature name: $ac_feature" >&2 - { (exit 1); exit 1; }; } - ac_feature=`echo $ac_feature | sed 's/[-.]/_/g'` - eval enable_$ac_feature=no ;; - - -docdir | --docdir | --docdi | --doc | --do) - ac_prev=docdir ;; - -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*) - docdir=$ac_optarg ;; - - -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv) - ac_prev=dvidir ;; - -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*) - dvidir=$ac_optarg ;; - - -enable-* | --enable-*) - ac_feature=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'` - # Reject names that are not valid shell variable names. - expr "x$ac_feature" : ".*[^-._$as_cr_alnum]" >/dev/null && - { echo "$as_me: error: invalid feature name: $ac_feature" >&2 - { (exit 1); exit 1; }; } - ac_feature=`echo $ac_feature | sed 's/[-.]/_/g'` - eval enable_$ac_feature=\$ac_optarg ;; - - -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ - | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ - | --exec | --exe | --ex) - ac_prev=exec_prefix ;; - -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \ - | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \ - | --exec=* | --exe=* | --ex=*) - exec_prefix=$ac_optarg ;; - - -gas | --gas | --ga | --g) - # Obsolete; use --with-gas. - with_gas=yes ;; - - -help | --help | --hel | --he | -h) - ac_init_help=long ;; - -help=r* | --help=r* | --hel=r* | --he=r* | -hr*) - ac_init_help=recursive ;; - -help=s* | --help=s* | --hel=s* | --he=s* | -hs*) - ac_init_help=short ;; - - -host | --host | --hos | --ho) - ac_prev=host_alias ;; - -host=* | --host=* | --hos=* | --ho=*) - host_alias=$ac_optarg ;; - - -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht) - ac_prev=htmldir ;; - -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \ - | --ht=*) - htmldir=$ac_optarg ;; - - -includedir | --includedir | --includedi | --included | --include \ - | --includ | --inclu | --incl | --inc) - ac_prev=includedir ;; - -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \ - | --includ=* | --inclu=* | --incl=* | --inc=*) - includedir=$ac_optarg ;; - - -infodir | --infodir | --infodi | --infod | --info | --inf) - ac_prev=infodir ;; - -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*) - infodir=$ac_optarg ;; - - -libdir | --libdir | --libdi | --libd) - ac_prev=libdir ;; - -libdir=* | --libdir=* | --libdi=* | --libd=*) - libdir=$ac_optarg ;; - - -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \ - | --libexe | --libex | --libe) - ac_prev=libexecdir ;; - -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \ - | --libexe=* | --libex=* | --libe=*) - libexecdir=$ac_optarg ;; - - -localedir | --localedir | --localedi | --localed | --locale) - ac_prev=localedir ;; - -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*) - localedir=$ac_optarg ;; - - -localstatedir | --localstatedir | --localstatedi | --localstated \ - | --localstate | --localstat | --localsta | --localst | --locals) - ac_prev=localstatedir ;; - -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \ - | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*) - localstatedir=$ac_optarg ;; - - -mandir | --mandir | --mandi | --mand | --man | --ma | --m) - ac_prev=mandir ;; - -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*) - mandir=$ac_optarg ;; - - -nfp | --nfp | --nf) - # Obsolete; use --without-fp. - with_fp=no ;; - - -no-create | --no-create | --no-creat | --no-crea | --no-cre \ - | --no-cr | --no-c | -n) - no_create=yes ;; - - -no-recursion | --no-recursion | --no-recursio | --no-recursi \ - | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) - no_recursion=yes ;; - - -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \ - | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \ - | --oldin | --oldi | --old | --ol | --o) - ac_prev=oldincludedir ;; - -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \ - | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \ - | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*) - oldincludedir=$ac_optarg ;; - - -prefix | --prefix | --prefi | --pref | --pre | --pr | --p) - ac_prev=prefix ;; - -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*) - prefix=$ac_optarg ;; - - -program-prefix | --program-prefix | --program-prefi | --program-pref \ - | --program-pre | --program-pr | --program-p) - ac_prev=program_prefix ;; - -program-prefix=* | --program-prefix=* | --program-prefi=* \ - | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*) - program_prefix=$ac_optarg ;; - - -program-suffix | --program-suffix | --program-suffi | --program-suff \ - | --program-suf | --program-su | --program-s) - ac_prev=program_suffix ;; - -program-suffix=* | --program-suffix=* | --program-suffi=* \ - | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*) - program_suffix=$ac_optarg ;; - - -program-transform-name | --program-transform-name \ - | --program-transform-nam | --program-transform-na \ - | --program-transform-n | --program-transform- \ - | --program-transform | --program-transfor \ - | --program-transfo | --program-transf \ - | --program-trans | --program-tran \ - | --progr-tra | --program-tr | --program-t) - ac_prev=program_transform_name ;; - -program-transform-name=* | --program-transform-name=* \ - | --program-transform-nam=* | --program-transform-na=* \ - | --program-transform-n=* | --program-transform-=* \ - | --program-transform=* | --program-transfor=* \ - | --program-transfo=* | --program-transf=* \ - | --program-trans=* | --program-tran=* \ - | --progr-tra=* | --program-tr=* | --program-t=*) - program_transform_name=$ac_optarg ;; - - -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd) - ac_prev=pdfdir ;; - -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*) - pdfdir=$ac_optarg ;; - - -psdir | --psdir | --psdi | --psd | --ps) - ac_prev=psdir ;; - -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*) - psdir=$ac_optarg ;; - - -q | -quiet | --quiet | --quie | --qui | --qu | --q \ - | -silent | --silent | --silen | --sile | --sil) - silent=yes ;; - - -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb) - ac_prev=sbindir ;; - -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \ - | --sbi=* | --sb=*) - sbindir=$ac_optarg ;; - - -sharedstatedir | --sharedstatedir | --sharedstatedi \ - | --sharedstated | --sharedstate | --sharedstat | --sharedsta \ - | --sharedst | --shareds | --shared | --share | --shar \ - | --sha | --sh) - ac_prev=sharedstatedir ;; - -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \ - | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \ - | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \ - | --sha=* | --sh=*) - sharedstatedir=$ac_optarg ;; - - -site | --site | --sit) - ac_prev=site ;; - -site=* | --site=* | --sit=*) - site=$ac_optarg ;; - - -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) - ac_prev=srcdir ;; - -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) - srcdir=$ac_optarg ;; - - -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \ - | --syscon | --sysco | --sysc | --sys | --sy) - ac_prev=sysconfdir ;; - -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \ - | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*) - sysconfdir=$ac_optarg ;; - - -target | --target | --targe | --targ | --tar | --ta | --t) - ac_prev=target_alias ;; - -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*) - target_alias=$ac_optarg ;; - - -v | -verbose | --verbose | --verbos | --verbo | --verb) - verbose=yes ;; - - -version | --version | --versio | --versi | --vers | -V) - ac_init_version=: ;; - - -with-* | --with-*) - ac_package=`expr "x$ac_option" : 'x-*with-\([^=]*\)'` - # Reject names that are not valid shell variable names. - expr "x$ac_package" : ".*[^-._$as_cr_alnum]" >/dev/null && - { echo "$as_me: error: invalid package name: $ac_package" >&2 - { (exit 1); exit 1; }; } - ac_package=`echo $ac_package | sed 's/[-.]/_/g'` - eval with_$ac_package=\$ac_optarg ;; - - -without-* | --without-*) - ac_package=`expr "x$ac_option" : 'x-*without-\(.*\)'` - # Reject names that are not valid shell variable names. - expr "x$ac_package" : ".*[^-._$as_cr_alnum]" >/dev/null && - { echo "$as_me: error: invalid package name: $ac_package" >&2 - { (exit 1); exit 1; }; } - ac_package=`echo $ac_package | sed 's/[-.]/_/g'` - eval with_$ac_package=no ;; - - --x) - # Obsolete; use --with-x. - with_x=yes ;; - - -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \ - | --x-incl | --x-inc | --x-in | --x-i) - ac_prev=x_includes ;; - -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \ - | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*) - x_includes=$ac_optarg ;; - - -x-libraries | --x-libraries | --x-librarie | --x-librari \ - | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l) - ac_prev=x_libraries ;; - -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \ - | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) - x_libraries=$ac_optarg ;; - - -*) { echo "$as_me: error: unrecognized option: $ac_option -Try \`$0 --help' for more information." >&2 - { (exit 1); exit 1; }; } - ;; - - *=*) - ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='` - # Reject names that are not valid shell variable names. - expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null && - { echo "$as_me: error: invalid variable name: $ac_envvar" >&2 - { (exit 1); exit 1; }; } - eval $ac_envvar=\$ac_optarg - export $ac_envvar ;; - - *) - # FIXME: should be removed in autoconf 3.0. - echo "$as_me: WARNING: you should use --build, --host, --target" >&2 - expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null && - echo "$as_me: WARNING: invalid host type: $ac_option" >&2 - : ${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option} - ;; - - esac -done - -if test -n "$ac_prev"; then - ac_option=--`echo $ac_prev | sed 's/_/-/g'` - { echo "$as_me: error: missing argument to $ac_option" >&2 - { (exit 1); exit 1; }; } -fi - -# Be sure to have absolute directory names. -for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \ - datadir sysconfdir sharedstatedir localstatedir includedir \ - oldincludedir docdir infodir htmldir dvidir pdfdir psdir \ - libdir localedir mandir -do - eval ac_val=\$$ac_var - case $ac_val in - [\\/$]* | ?:[\\/]* ) continue;; - NONE | '' ) case $ac_var in *prefix ) continue;; esac;; - esac - { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2 - { (exit 1); exit 1; }; } -done - -# There might be people who depend on the old broken behavior: `$host' -# used to hold the argument of --host etc. -# FIXME: To remove some day. -build=$build_alias -host=$host_alias -target=$target_alias - -# FIXME: To remove some day. -if test "x$host_alias" != x; then - if test "x$build_alias" = x; then - cross_compiling=maybe - echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host. - If a cross compiler is detected then cross compile mode will be used." >&2 - elif test "x$build_alias" != "x$host_alias"; then - cross_compiling=yes - fi -fi - -ac_tool_prefix= -test -n "$host_alias" && ac_tool_prefix=$host_alias- - -test "$silent" = yes && exec 6>/dev/null - - -ac_pwd=`pwd` && test -n "$ac_pwd" && -ac_ls_di=`ls -di .` && -ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` || - { echo "$as_me: error: Working directory cannot be determined" >&2 - { (exit 1); exit 1; }; } -test "X$ac_ls_di" = "X$ac_pwd_ls_di" || - { echo "$as_me: error: pwd does not report name of working directory" >&2 - { (exit 1); exit 1; }; } - - -# Find the source files, if location was not specified. -if test -z "$srcdir"; then - ac_srcdir_defaulted=yes - # Try the directory containing this script, then the parent directory. - ac_confdir=`$as_dirname -- "$0" || -$as_expr X"$0" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$0" : 'X\(//\)[^/]' \| \ - X"$0" : 'X\(//\)$' \| \ - X"$0" : 'X\(/\)' \| . 2>/dev/null || -echo X"$0" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - srcdir=$ac_confdir - if test ! -r "$srcdir/$ac_unique_file"; then - srcdir=.. - fi -else - ac_srcdir_defaulted=no -fi -if test ! -r "$srcdir/$ac_unique_file"; then - test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .." - { echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2 - { (exit 1); exit 1; }; } -fi -ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work" -ac_abs_confdir=`( - cd "$srcdir" && test -r "./$ac_unique_file" || { echo "$as_me: error: $ac_msg" >&2 - { (exit 1); exit 1; }; } - pwd)` -# When building in place, set srcdir=. -if test "$ac_abs_confdir" = "$ac_pwd"; then - srcdir=. -fi -# Remove unnecessary trailing slashes from srcdir. -# Double slashes in file names in object file debugging info -# mess up M-x gdb in Emacs. -case $srcdir in -*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;; -esac -for ac_var in $ac_precious_vars; do - eval ac_env_${ac_var}_set=\${${ac_var}+set} - eval ac_env_${ac_var}_value=\$${ac_var} - eval ac_cv_env_${ac_var}_set=\${${ac_var}+set} - eval ac_cv_env_${ac_var}_value=\$${ac_var} -done - -# -# Report the --help message. -# -if test "$ac_init_help" = "long"; then - # Omit some internal or obsolete options to make the list less imposing. - # This message is too long to be a string in the A/UX 3.1 sh. - cat <<_ACEOF -\`configure' configures mobile-broadband-provider-info 20100122 to adapt to many kinds of systems. - -Usage: $0 [OPTION]... [VAR=VALUE]... - -To assign environment variables (e.g., CC, CFLAGS...), specify them as -VAR=VALUE. See below for descriptions of some of the useful variables. - -Defaults for the options are specified in brackets. - -Configuration: - -h, --help display this help and exit - --help=short display options specific to this package - --help=recursive display the short help of all the included packages - -V, --version display version information and exit - -q, --quiet, --silent do not print \`checking...' messages - --cache-file=FILE cache test results in FILE [disabled] - -C, --config-cache alias for \`--cache-file=config.cache' - -n, --no-create do not create output files - --srcdir=DIR find the sources in DIR [configure dir or \`..'] - -Installation directories: - --prefix=PREFIX install architecture-independent files in PREFIX - [$ac_default_prefix] - --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX - [PREFIX] - -By default, \`make install' will install all the files in -\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify -an installation prefix other than \`$ac_default_prefix' using \`--prefix', -for instance \`--prefix=\$HOME'. - -For better control, use the options below. - -Fine tuning of the installation directories: - --bindir=DIR user executables [EPREFIX/bin] - --sbindir=DIR system admin executables [EPREFIX/sbin] - --libexecdir=DIR program executables [EPREFIX/libexec] - --sysconfdir=DIR read-only single-machine data [PREFIX/etc] - --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com] - --localstatedir=DIR modifiable single-machine data [PREFIX/var] - --libdir=DIR object code libraries [EPREFIX/lib] - --includedir=DIR C header files [PREFIX/include] - --oldincludedir=DIR C header files for non-gcc [/usr/include] - --datarootdir=DIR read-only arch.-independent data root [PREFIX/share] - --datadir=DIR read-only architecture-independent data [DATAROOTDIR] - --infodir=DIR info documentation [DATAROOTDIR/info] - --localedir=DIR locale-dependent data [DATAROOTDIR/locale] - --mandir=DIR man documentation [DATAROOTDIR/man] - --docdir=DIR documentation root [DATAROOTDIR/doc/mobile-broadband-provider-info] - --htmldir=DIR html documentation [DOCDIR] - --dvidir=DIR dvi documentation [DOCDIR] - --pdfdir=DIR pdf documentation [DOCDIR] - --psdir=DIR ps documentation [DOCDIR] -_ACEOF - - cat <<\_ACEOF - -Program names: - --program-prefix=PREFIX prepend PREFIX to installed program names - --program-suffix=SUFFIX append SUFFIX to installed program names - --program-transform-name=PROGRAM run sed PROGRAM on installed program names -_ACEOF -fi - -if test -n "$ac_init_help"; then - case $ac_init_help in - short | recursive ) echo "Configuration of mobile-broadband-provider-info 20100122:";; - esac - cat <<\_ACEOF - -Optional Features: - --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no) - --enable-FEATURE[=ARG] include FEATURE [ARG=yes] - --enable-maintainer-mode enable make rules and dependencies not useful - (and sometimes confusing) to the casual installer - -Report bugs to . -_ACEOF -ac_status=$? -fi - -if test "$ac_init_help" = "recursive"; then - # If there are subdirs, report their specific --help. - for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue - test -d "$ac_dir" || continue - ac_builddir=. - -case "$ac_dir" in -.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; -*) - ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` - # A ".." for each directory in $ac_dir_suffix. - ac_top_builddir_sub=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,/..,g;s,/,,'` - case $ac_top_builddir_sub in - "") ac_top_builddir_sub=. ac_top_build_prefix= ;; - *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; - esac ;; -esac -ac_abs_top_builddir=$ac_pwd -ac_abs_builddir=$ac_pwd$ac_dir_suffix -# for backward compatibility: -ac_top_builddir=$ac_top_build_prefix - -case $srcdir in - .) # We are building in place. - ac_srcdir=. - ac_top_srcdir=$ac_top_builddir_sub - ac_abs_top_srcdir=$ac_pwd ;; - [\\/]* | ?:[\\/]* ) # Absolute name. - ac_srcdir=$srcdir$ac_dir_suffix; - ac_top_srcdir=$srcdir - ac_abs_top_srcdir=$srcdir ;; - *) # Relative name. - ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix - ac_top_srcdir=$ac_top_build_prefix$srcdir - ac_abs_top_srcdir=$ac_pwd/$srcdir ;; -esac -ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix - - cd "$ac_dir" || { ac_status=$?; continue; } - # Check for guested configure. - if test -f "$ac_srcdir/configure.gnu"; then - echo && - $SHELL "$ac_srcdir/configure.gnu" --help=recursive - elif test -f "$ac_srcdir/configure"; then - echo && - $SHELL "$ac_srcdir/configure" --help=recursive - else - echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2 - fi || ac_status=$? - cd "$ac_pwd" || { ac_status=$?; break; } - done -fi - -test -n "$ac_init_help" && exit $ac_status -if $ac_init_version; then - cat <<\_ACEOF -mobile-broadband-provider-info configure 20100122 -generated by GNU Autoconf 2.61 - -Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, -2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc. -This configure script is free software; the Free Software Foundation -gives unlimited permission to copy, distribute and modify it. -_ACEOF - exit -fi -cat >config.log <<_ACEOF -This file contains any messages produced by compilers while -running configure, to aid debugging if configure makes a mistake. - -It was created by mobile-broadband-provider-info $as_me 20100122, which was -generated by GNU Autoconf 2.61. Invocation command line was - - $ $0 $@ - -_ACEOF -exec 5>>config.log -{ -cat <<_ASUNAME -## --------- ## -## Platform. ## -## --------- ## - -hostname = `(hostname || uname -n) 2>/dev/null | sed 1q` -uname -m = `(uname -m) 2>/dev/null || echo unknown` -uname -r = `(uname -r) 2>/dev/null || echo unknown` -uname -s = `(uname -s) 2>/dev/null || echo unknown` -uname -v = `(uname -v) 2>/dev/null || echo unknown` - -/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown` -/bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown` - -/bin/arch = `(/bin/arch) 2>/dev/null || echo unknown` -/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown` -/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown` -/usr/bin/hostinfo = `(/usr/bin/hostinfo) 2>/dev/null || echo unknown` -/bin/machine = `(/bin/machine) 2>/dev/null || echo unknown` -/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown` -/bin/universe = `(/bin/universe) 2>/dev/null || echo unknown` - -_ASUNAME - -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - echo "PATH: $as_dir" -done -IFS=$as_save_IFS - -} >&5 - -cat >&5 <<_ACEOF - - -## ----------- ## -## Core tests. ## -## ----------- ## - -_ACEOF - - -# Keep a trace of the command line. -# Strip out --no-create and --no-recursion so they do not pile up. -# Strip out --silent because we don't want to record it for future runs. -# Also quote any args containing shell meta-characters. -# Make two passes to allow for proper duplicate-argument suppression. -ac_configure_args= -ac_configure_args0= -ac_configure_args1= -ac_must_keep_next=false -for ac_pass in 1 2 -do - for ac_arg - do - case $ac_arg in - -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;; - -q | -quiet | --quiet | --quie | --qui | --qu | --q \ - | -silent | --silent | --silen | --sile | --sil) - continue ;; - *\'*) - ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; - esac - case $ac_pass in - 1) ac_configure_args0="$ac_configure_args0 '$ac_arg'" ;; - 2) - ac_configure_args1="$ac_configure_args1 '$ac_arg'" - if test $ac_must_keep_next = true; then - ac_must_keep_next=false # Got value, back to normal. - else - case $ac_arg in - *=* | --config-cache | -C | -disable-* | --disable-* \ - | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \ - | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \ - | -with-* | --with-* | -without-* | --without-* | --x) - case "$ac_configure_args0 " in - "$ac_configure_args1"*" '$ac_arg' "* ) continue ;; - esac - ;; - -* ) ac_must_keep_next=true ;; - esac - fi - ac_configure_args="$ac_configure_args '$ac_arg'" - ;; - esac - done -done -$as_unset ac_configure_args0 || test "${ac_configure_args0+set}" != set || { ac_configure_args0=; export ac_configure_args0; } -$as_unset ac_configure_args1 || test "${ac_configure_args1+set}" != set || { ac_configure_args1=; export ac_configure_args1; } - -# When interrupted or exit'd, cleanup temporary files, and complete -# config.log. We remove comments because anyway the quotes in there -# would cause problems or look ugly. -# WARNING: Use '\'' to represent an apostrophe within the trap. -# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug. -trap 'exit_status=$? - # Save into config.log some information that might help in debugging. - { - echo - - cat <<\_ASBOX -## ---------------- ## -## Cache variables. ## -## ---------------- ## -_ASBOX - echo - # The following way of writing the cache mishandles newlines in values, -( - for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do - eval ac_val=\$$ac_var - case $ac_val in #( - *${as_nl}*) - case $ac_var in #( - *_cv_*) { echo "$as_me:$LINENO: WARNING: Cache variable $ac_var contains a newline." >&5 -echo "$as_me: WARNING: Cache variable $ac_var contains a newline." >&2;} ;; - esac - case $ac_var in #( - _ | IFS | as_nl) ;; #( - *) $as_unset $ac_var ;; - esac ;; - esac - done - (set) 2>&1 | - case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #( - *${as_nl}ac_space=\ *) - sed -n \ - "s/'\''/'\''\\\\'\'''\''/g; - s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p" - ;; #( - *) - sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" - ;; - esac | - sort -) - echo - - cat <<\_ASBOX -## ----------------- ## -## Output variables. ## -## ----------------- ## -_ASBOX - echo - for ac_var in $ac_subst_vars - do - eval ac_val=\$$ac_var - case $ac_val in - *\'\''*) ac_val=`echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; - esac - echo "$ac_var='\''$ac_val'\''" - done | sort - echo - - if test -n "$ac_subst_files"; then - cat <<\_ASBOX -## ------------------- ## -## File substitutions. ## -## ------------------- ## -_ASBOX - echo - for ac_var in $ac_subst_files - do - eval ac_val=\$$ac_var - case $ac_val in - *\'\''*) ac_val=`echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; - esac - echo "$ac_var='\''$ac_val'\''" - done | sort - echo - fi - - if test -s confdefs.h; then - cat <<\_ASBOX -## ----------- ## -## confdefs.h. ## -## ----------- ## -_ASBOX - echo - cat confdefs.h - echo - fi - test "$ac_signal" != 0 && - echo "$as_me: caught signal $ac_signal" - echo "$as_me: exit $exit_status" - } >&5 - rm -f core *.core core.conftest.* && - rm -f -r conftest* confdefs* conf$$* $ac_clean_files && - exit $exit_status -' 0 -for ac_signal in 1 2 13 15; do - trap 'ac_signal='$ac_signal'; { (exit 1); exit 1; }' $ac_signal -done -ac_signal=0 - -# confdefs.h avoids OS command line length limits that DEFS can exceed. -rm -f -r conftest* confdefs.h - -# Predefined preprocessor variables. - -cat >>confdefs.h <<_ACEOF -#define PACKAGE_NAME "$PACKAGE_NAME" -_ACEOF - - -cat >>confdefs.h <<_ACEOF -#define PACKAGE_TARNAME "$PACKAGE_TARNAME" -_ACEOF - - -cat >>confdefs.h <<_ACEOF -#define PACKAGE_VERSION "$PACKAGE_VERSION" -_ACEOF - - -cat >>confdefs.h <<_ACEOF -#define PACKAGE_STRING "$PACKAGE_STRING" -_ACEOF - - -cat >>confdefs.h <<_ACEOF -#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT" -_ACEOF - - -# Let the site file select an alternate cache file if it wants to. -# Prefer explicitly selected file to automatically selected ones. -if test -n "$CONFIG_SITE"; then - set x "$CONFIG_SITE" -elif test "x$prefix" != xNONE; then - set x "$prefix/share/config.site" "$prefix/etc/config.site" -else - set x "$ac_default_prefix/share/config.site" \ - "$ac_default_prefix/etc/config.site" -fi -shift -for ac_site_file -do - if test -r "$ac_site_file"; then - { echo "$as_me:$LINENO: loading site script $ac_site_file" >&5 -echo "$as_me: loading site script $ac_site_file" >&6;} - sed 's/^/| /' "$ac_site_file" >&5 - . "$ac_site_file" - fi -done - -if test -r "$cache_file"; then - # Some versions of bash will fail to source /dev/null (special - # files actually), so we avoid doing that. - if test -f "$cache_file"; then - { echo "$as_me:$LINENO: loading cache $cache_file" >&5 -echo "$as_me: loading cache $cache_file" >&6;} - case $cache_file in - [\\/]* | ?:[\\/]* ) . "$cache_file";; - *) . "./$cache_file";; - esac - fi -else - { echo "$as_me:$LINENO: creating cache $cache_file" >&5 -echo "$as_me: creating cache $cache_file" >&6;} - >$cache_file -fi - -# Check that the precious variables saved in the cache have kept the same -# value. -ac_cache_corrupted=false -for ac_var in $ac_precious_vars; do - eval ac_old_set=\$ac_cv_env_${ac_var}_set - eval ac_new_set=\$ac_env_${ac_var}_set - eval ac_old_val=\$ac_cv_env_${ac_var}_value - eval ac_new_val=\$ac_env_${ac_var}_value - case $ac_old_set,$ac_new_set in - set,) - { echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5 -echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;} - ac_cache_corrupted=: ;; - ,set) - { echo "$as_me:$LINENO: error: \`$ac_var' was not set in the previous run" >&5 -echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;} - ac_cache_corrupted=: ;; - ,);; - *) - if test "x$ac_old_val" != "x$ac_new_val"; then - { echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5 -echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;} - { echo "$as_me:$LINENO: former value: $ac_old_val" >&5 -echo "$as_me: former value: $ac_old_val" >&2;} - { echo "$as_me:$LINENO: current value: $ac_new_val" >&5 -echo "$as_me: current value: $ac_new_val" >&2;} - ac_cache_corrupted=: - fi;; - esac - # Pass precious variables to config.status. - if test "$ac_new_set" = set; then - case $ac_new_val in - *\'*) ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;; - *) ac_arg=$ac_var=$ac_new_val ;; - esac - case " $ac_configure_args " in - *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy. - *) ac_configure_args="$ac_configure_args '$ac_arg'" ;; - esac - fi -done -if $ac_cache_corrupted; then - { echo "$as_me:$LINENO: error: changes in the environment can compromise the build" >&5 -echo "$as_me: error: changes in the environment can compromise the build" >&2;} - { { echo "$as_me:$LINENO: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5 -echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&2;} - { (exit 1); exit 1; }; } -fi - - - - - - - - - - - - - - - - - - - - - - - - - -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - - -am__api_version='1.10' - -ac_aux_dir= -for ac_dir in "$srcdir" "$srcdir/.." "$srcdir/../.."; do - if test -f "$ac_dir/install-sh"; then - ac_aux_dir=$ac_dir - ac_install_sh="$ac_aux_dir/install-sh -c" - break - elif test -f "$ac_dir/install.sh"; then - ac_aux_dir=$ac_dir - ac_install_sh="$ac_aux_dir/install.sh -c" - break - elif test -f "$ac_dir/shtool"; then - ac_aux_dir=$ac_dir - ac_install_sh="$ac_aux_dir/shtool install -c" - break - fi -done -if test -z "$ac_aux_dir"; then - { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" >&5 -echo "$as_me: error: cannot find install-sh or install.sh in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" >&2;} - { (exit 1); exit 1; }; } -fi - -# These three variables are undocumented and unsupported, -# and are intended to be withdrawn in a future Autoconf release. -# They can cause serious problems if a builder's source tree is in a directory -# whose full name contains unusual characters. -ac_config_guess="$SHELL $ac_aux_dir/config.guess" # Please don't use this var. -ac_config_sub="$SHELL $ac_aux_dir/config.sub" # Please don't use this var. -ac_configure="$SHELL $ac_aux_dir/configure" # Please don't use this var. - - -# Find a good install program. We prefer a C program (faster), -# so one script is as good as another. But avoid the broken or -# incompatible versions: -# SysV /etc/install, /usr/sbin/install -# SunOS /usr/etc/install -# IRIX /sbin/install -# AIX /bin/install -# AmigaOS /C/install, which installs bootblocks on floppy discs -# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag -# AFS /usr/afsws/bin/install, which mishandles nonexistent args -# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" -# OS/2's system install, which has a completely different semantic -# ./install, which can be erroneously created by make from ./install.sh. -{ echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5 -echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6; } -if test -z "$INSTALL"; then -if test "${ac_cv_path_install+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - # Account for people who put trailing slashes in PATH elements. -case $as_dir/ in - ./ | .// | /cC/* | \ - /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \ - ?:\\/os2\\/install\\/* | ?:\\/OS2\\/INSTALL\\/* | \ - /usr/ucb/* ) ;; - *) - # OSF1 and SCO ODT 3.0 have their own names for install. - # Don't use installbsd from OSF since it installs stuff as root - # by default. - for ac_prog in ginstall scoinst install; do - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; }; then - if test $ac_prog = install && - grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then - # AIX install. It has an incompatible calling convention. - : - elif test $ac_prog = install && - grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then - # program-specific install script used by HP pwplus--don't use. - : - else - ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c" - break 3 - fi - fi - done - done - ;; -esac -done -IFS=$as_save_IFS - - -fi - if test "${ac_cv_path_install+set}" = set; then - INSTALL=$ac_cv_path_install - else - # As a last resort, use the slow shell script. Don't cache a - # value for INSTALL within a source directory, because that will - # break other packages using the cache if that directory is - # removed, or if the value is a relative name. - INSTALL=$ac_install_sh - fi -fi -{ echo "$as_me:$LINENO: result: $INSTALL" >&5 -echo "${ECHO_T}$INSTALL" >&6; } - -# Use test -z because SunOS4 sh mishandles braces in ${var-val}. -# It thinks the first close brace ends the variable substitution. -test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' - -test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}' - -test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' - -{ echo "$as_me:$LINENO: checking whether build environment is sane" >&5 -echo $ECHO_N "checking whether build environment is sane... $ECHO_C" >&6; } -# Just in case -sleep 1 -echo timestamp > conftest.file -# Do `set' in a subshell so we don't clobber the current shell's -# arguments. Must try -L first in case configure is actually a -# symlink; some systems play weird games with the mod time of symlinks -# (eg FreeBSD returns the mod time of the symlink's containing -# directory). -if ( - set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null` - if test "$*" = "X"; then - # -L didn't work. - set X `ls -t $srcdir/configure conftest.file` - fi - rm -f conftest.file - if test "$*" != "X $srcdir/configure conftest.file" \ - && test "$*" != "X conftest.file $srcdir/configure"; then - - # If neither matched, then we have a broken ls. This can happen - # if, for instance, CONFIG_SHELL is bash and it inherits a - # broken ls alias from the environment. This has actually - # happened. Such a system could not be considered "sane". - { { echo "$as_me:$LINENO: error: ls -t appears to fail. Make sure there is not a broken -alias in your environment" >&5 -echo "$as_me: error: ls -t appears to fail. Make sure there is not a broken -alias in your environment" >&2;} - { (exit 1); exit 1; }; } - fi - - test "$2" = conftest.file - ) -then - # Ok. - : -else - { { echo "$as_me:$LINENO: error: newly created file is older than distributed files! -Check your system clock" >&5 -echo "$as_me: error: newly created file is older than distributed files! -Check your system clock" >&2;} - { (exit 1); exit 1; }; } -fi -{ echo "$as_me:$LINENO: result: yes" >&5 -echo "${ECHO_T}yes" >&6; } -test "$program_prefix" != NONE && - program_transform_name="s&^&$program_prefix&;$program_transform_name" -# Use a double $ so make ignores it. -test "$program_suffix" != NONE && - program_transform_name="s&\$&$program_suffix&;$program_transform_name" -# Double any \ or $. echo might interpret backslashes. -# By default was `s,x,x', remove it if useless. -cat <<\_ACEOF >conftest.sed -s/[\\$]/&&/g;s/;s,x,x,$// -_ACEOF -program_transform_name=`echo $program_transform_name | sed -f conftest.sed` -rm -f conftest.sed - -# expand $ac_aux_dir to an absolute path -am_aux_dir=`cd $ac_aux_dir && pwd` - -test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing" -# Use eval to expand $SHELL -if eval "$MISSING --run true"; then - am_missing_run="$MISSING --run " -else - am_missing_run= - { echo "$as_me:$LINENO: WARNING: \`missing' script is too old or missing" >&5 -echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;} -fi - -{ echo "$as_me:$LINENO: checking for a thread-safe mkdir -p" >&5 -echo $ECHO_N "checking for a thread-safe mkdir -p... $ECHO_C" >&6; } -if test -z "$MKDIR_P"; then - if test "${ac_cv_path_mkdir+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH$PATH_SEPARATOR/opt/sfw/bin -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_prog in mkdir gmkdir; do - for ac_exec_ext in '' $ac_executable_extensions; do - { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; } || continue - case `"$as_dir/$ac_prog$ac_exec_ext" --version 2>&1` in #( - 'mkdir (GNU coreutils) '* | \ - 'mkdir (coreutils) '* | \ - 'mkdir (fileutils) '4.1*) - ac_cv_path_mkdir=$as_dir/$ac_prog$ac_exec_ext - break 3;; - esac - done - done -done -IFS=$as_save_IFS - -fi - - if test "${ac_cv_path_mkdir+set}" = set; then - MKDIR_P="$ac_cv_path_mkdir -p" - else - # As a last resort, use the slow shell script. Don't cache a - # value for MKDIR_P within a source directory, because that will - # break other packages using the cache if that directory is - # removed, or if the value is a relative name. - test -d ./--version && rmdir ./--version - MKDIR_P="$ac_install_sh -d" - fi -fi -{ echo "$as_me:$LINENO: result: $MKDIR_P" >&5 -echo "${ECHO_T}$MKDIR_P" >&6; } - -mkdir_p="$MKDIR_P" -case $mkdir_p in - [\\/$]* | ?:[\\/]*) ;; - */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;; -esac - -for ac_prog in gawk mawk nawk awk -do - # Extract the first word of "$ac_prog", so it can be a program name with args. -set dummy $ac_prog; ac_word=$2 -{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } -if test "${ac_cv_prog_AWK+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$AWK"; then - ac_cv_prog_AWK="$AWK" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_AWK="$ac_prog" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done -IFS=$as_save_IFS - -fi -fi -AWK=$ac_cv_prog_AWK -if test -n "$AWK"; then - { echo "$as_me:$LINENO: result: $AWK" >&5 -echo "${ECHO_T}$AWK" >&6; } -else - { echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6; } -fi - - - test -n "$AWK" && break -done - -{ echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5 -echo $ECHO_N "checking whether ${MAKE-make} sets \$(MAKE)... $ECHO_C" >&6; } -set x ${MAKE-make}; ac_make=`echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'` -if { as_var=ac_cv_prog_make_${ac_make}_set; eval "test \"\${$as_var+set}\" = set"; }; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - cat >conftest.make <<\_ACEOF -SHELL = /bin/sh -all: - @echo '@@@%%%=$(MAKE)=@@@%%%' -_ACEOF -# GNU make sometimes prints "make[1]: Entering...", which would confuse us. -case `${MAKE-make} -f conftest.make 2>/dev/null` in - *@@@%%%=?*=@@@%%%*) - eval ac_cv_prog_make_${ac_make}_set=yes;; - *) - eval ac_cv_prog_make_${ac_make}_set=no;; -esac -rm -f conftest.make -fi -if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then - { echo "$as_me:$LINENO: result: yes" >&5 -echo "${ECHO_T}yes" >&6; } - SET_MAKE= -else - { echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6; } - SET_MAKE="MAKE=${MAKE-make}" -fi - -rm -rf .tst 2>/dev/null -mkdir .tst 2>/dev/null -if test -d .tst; then - am__leading_dot=. -else - am__leading_dot=_ -fi -rmdir .tst 2>/dev/null - -if test "`cd $srcdir && pwd`" != "`pwd`"; then - # Use -I$(srcdir) only when $(srcdir) != ., so that make's output - # is not polluted with repeated "-I." - am__isrc=' -I$(srcdir)' - # test to see if srcdir already configured - if test -f $srcdir/config.status; then - { { echo "$as_me:$LINENO: error: source directory already configured; run \"make distclean\" there first" >&5 -echo "$as_me: error: source directory already configured; run \"make distclean\" there first" >&2;} - { (exit 1); exit 1; }; } - fi -fi - -# test whether we have cygpath -if test -z "$CYGPATH_W"; then - if (cygpath --version) >/dev/null 2>/dev/null; then - CYGPATH_W='cygpath -w' - else - CYGPATH_W=echo - fi -fi - - -# Define the identity of the package. - PACKAGE='mobile-broadband-provider-info' - VERSION='20100122' - - -cat >>confdefs.h <<_ACEOF -#define PACKAGE "$PACKAGE" -_ACEOF - - -cat >>confdefs.h <<_ACEOF -#define VERSION "$VERSION" -_ACEOF - -# Some tools Automake needs. - -ACLOCAL=${ACLOCAL-"${am_missing_run}aclocal-${am__api_version}"} - - -AUTOCONF=${AUTOCONF-"${am_missing_run}autoconf"} - - -AUTOMAKE=${AUTOMAKE-"${am_missing_run}automake-${am__api_version}"} - - -AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"} - - -MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"} - -install_sh=${install_sh-"\$(SHELL) $am_aux_dir/install-sh"} - -# Installed binaries are usually stripped using `strip' when the user -# run `make install-strip'. However `strip' might not be the right -# tool to use in cross-compilation environments, therefore Automake -# will honor the `STRIP' environment variable to overrule this program. -if test "$cross_compiling" != no; then - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. -set dummy ${ac_tool_prefix}strip; ac_word=$2 -{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } -if test "${ac_cv_prog_STRIP+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$STRIP"; then - ac_cv_prog_STRIP="$STRIP" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_STRIP="${ac_tool_prefix}strip" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done -IFS=$as_save_IFS - -fi -fi -STRIP=$ac_cv_prog_STRIP -if test -n "$STRIP"; then - { echo "$as_me:$LINENO: result: $STRIP" >&5 -echo "${ECHO_T}$STRIP" >&6; } -else - { echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6; } -fi - - -fi -if test -z "$ac_cv_prog_STRIP"; then - ac_ct_STRIP=$STRIP - # Extract the first word of "strip", so it can be a program name with args. -set dummy strip; ac_word=$2 -{ echo "$as_me:$LINENO: checking for $ac_word" >&5 -echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } -if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then - echo $ECHO_N "(cached) $ECHO_C" >&6 -else - if test -n "$ac_ct_STRIP"; then - ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_STRIP="strip" - echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done -done -IFS=$as_save_IFS - -fi -fi -ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP -if test -n "$ac_ct_STRIP"; then - { echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5 -echo "${ECHO_T}$ac_ct_STRIP" >&6; } -else - { echo "$as_me:$LINENO: result: no" >&5 -echo "${ECHO_T}no" >&6; } -fi - - if test "x$ac_ct_STRIP" = x; then - STRIP=":" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools -whose name does not start with the host triplet. If you think this -configuration is useful to you, please write to autoconf@gnu.org." >&5 -echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools -whose name does not start with the host triplet. If you think this -configuration is useful to you, please write to autoconf@gnu.org." >&2;} -ac_tool_warned=yes ;; -esac - STRIP=$ac_ct_STRIP - fi -else - STRIP="$ac_cv_prog_STRIP" -fi - -fi -INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s" - -# We need awk for the "check" target. The system "awk" is bad on -# some platforms. -# Always define AMTAR for backward compatibility. - -AMTAR=${AMTAR-"${am_missing_run}tar"} - -am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -' - - - - - -{ echo "$as_me:$LINENO: checking whether to enable maintainer-specific portions of Makefiles" >&5 -echo $ECHO_N "checking whether to enable maintainer-specific portions of Makefiles... $ECHO_C" >&6; } - # Check whether --enable-maintainer-mode was given. -if test "${enable_maintainer_mode+set}" = set; then - enableval=$enable_maintainer_mode; USE_MAINTAINER_MODE=$enableval -else - USE_MAINTAINER_MODE=no -fi - - { echo "$as_me:$LINENO: result: $USE_MAINTAINER_MODE" >&5 -echo "${ECHO_T}$USE_MAINTAINER_MODE" >&6; } - if test $USE_MAINTAINER_MODE = yes; then - MAINTAINER_MODE_TRUE= - MAINTAINER_MODE_FALSE='#' -else - MAINTAINER_MODE_TRUE='#' - MAINTAINER_MODE_FALSE= -fi - - MAINT=$MAINTAINER_MODE_TRUE - - - -ac_config_files="$ac_config_files Makefile mobile-broadband-provider-info.pc" - -cat >confcache <<\_ACEOF -# This file is a shell script that caches the results of configure -# tests run on this system so they can be shared between configure -# scripts and configure runs, see configure's option --config-cache. -# It is not useful on other systems. If it contains results you don't -# want to keep, you may remove or edit it. -# -# config.status only pays attention to the cache file if you give it -# the --recheck option to rerun configure. -# -# `ac_cv_env_foo' variables (set or unset) will be overridden when -# loading this file, other *unset* `ac_cv_foo' will be assigned the -# following values. - -_ACEOF - -# The following way of writing the cache mishandles newlines in values, -# but we know of no workaround that is simple, portable, and efficient. -# So, we kill variables containing newlines. -# Ultrix sh set writes to stderr and can't be redirected directly, -# and sets the high bit in the cache file unless we assign to the vars. -( - for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do - eval ac_val=\$$ac_var - case $ac_val in #( - *${as_nl}*) - case $ac_var in #( - *_cv_*) { echo "$as_me:$LINENO: WARNING: Cache variable $ac_var contains a newline." >&5 -echo "$as_me: WARNING: Cache variable $ac_var contains a newline." >&2;} ;; - esac - case $ac_var in #( - _ | IFS | as_nl) ;; #( - *) $as_unset $ac_var ;; - esac ;; - esac - done - - (set) 2>&1 | - case $as_nl`(ac_space=' '; set) 2>&1` in #( - *${as_nl}ac_space=\ *) - # `set' does not quote correctly, so add quotes (double-quote - # substitution turns \\\\ into \\, and sed turns \\ into \). - sed -n \ - "s/'/'\\\\''/g; - s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p" - ;; #( - *) - # `set' quotes correctly as required by POSIX, so do not add quotes. - sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" - ;; - esac | - sort -) | - sed ' - /^ac_cv_env_/b end - t clear - :clear - s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/ - t end - s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/ - :end' >>confcache -if diff "$cache_file" confcache >/dev/null 2>&1; then :; else - if test -w "$cache_file"; then - test "x$cache_file" != "x/dev/null" && - { echo "$as_me:$LINENO: updating cache $cache_file" >&5 -echo "$as_me: updating cache $cache_file" >&6;} - cat confcache >$cache_file - else - { echo "$as_me:$LINENO: not updating unwritable cache $cache_file" >&5 -echo "$as_me: not updating unwritable cache $cache_file" >&6;} - fi -fi -rm -f confcache - -test "x$prefix" = xNONE && prefix=$ac_default_prefix -# Let make expand exec_prefix. -test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' - -# Transform confdefs.h into DEFS. -# Protect against shell expansion while executing Makefile rules. -# Protect against Makefile macro expansion. -# -# If the first sed substitution is executed (which looks for macros that -# take arguments), then branch to the quote section. Otherwise, -# look for a macro that doesn't take arguments. -ac_script=' -t clear -:clear -s/^[ ]*#[ ]*define[ ][ ]*\([^ (][^ (]*([^)]*)\)[ ]*\(.*\)/-D\1=\2/g -t quote -s/^[ ]*#[ ]*define[ ][ ]*\([^ ][^ ]*\)[ ]*\(.*\)/-D\1=\2/g -t quote -b any -:quote -s/[ `~#$^&*(){}\\|;'\''"<>?]/\\&/g -s/\[/\\&/g -s/\]/\\&/g -s/\$/$$/g -H -:any -${ - g - s/^\n// - s/\n/ /g - p -} -' -DEFS=`sed -n "$ac_script" confdefs.h` - - -ac_libobjs= -ac_ltlibobjs= -for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue - # 1. Remove the extension, and $U if already installed. - ac_script='s/\$U\././;s/\.o$//;s/\.obj$//' - ac_i=`echo "$ac_i" | sed "$ac_script"` - # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR - # will be set to the directory where LIBOBJS objects are built. - ac_libobjs="$ac_libobjs \${LIBOBJDIR}$ac_i\$U.$ac_objext" - ac_ltlibobjs="$ac_ltlibobjs \${LIBOBJDIR}$ac_i"'$U.lo' -done -LIBOBJS=$ac_libobjs - -LTLIBOBJS=$ac_ltlibobjs - - -if test -z "${MAINTAINER_MODE_TRUE}" && test -z "${MAINTAINER_MODE_FALSE}"; then - { { echo "$as_me:$LINENO: error: conditional \"MAINTAINER_MODE\" was never defined. -Usually this means the macro was only invoked conditionally." >&5 -echo "$as_me: error: conditional \"MAINTAINER_MODE\" was never defined. -Usually this means the macro was only invoked conditionally." >&2;} - { (exit 1); exit 1; }; } -fi - -: ${CONFIG_STATUS=./config.status} -ac_clean_files_save=$ac_clean_files -ac_clean_files="$ac_clean_files $CONFIG_STATUS" -{ echo "$as_me:$LINENO: creating $CONFIG_STATUS" >&5 -echo "$as_me: creating $CONFIG_STATUS" >&6;} -cat >$CONFIG_STATUS <<_ACEOF -#! $SHELL -# Generated by $as_me. -# Run this file to recreate the current configuration. -# Compiler output produced by configure, useful for debugging -# configure, is in config.log if it exists. - -debug=false -ac_cs_recheck=false -ac_cs_silent=false -SHELL=\${CONFIG_SHELL-$SHELL} -_ACEOF - -cat >>$CONFIG_STATUS <<\_ACEOF -## --------------------- ## -## M4sh Initialization. ## -## --------------------- ## - -# Be more Bourne compatible -DUALCASE=1; export DUALCASE # for MKS sh -if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then - emulate sh - NULLCMD=: - # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which - # is contrary to our usage. Disable this feature. - alias -g '${1+"$@"}'='"$@"' - setopt NO_GLOB_SUBST -else - case `(set -o) 2>/dev/null` in - *posix*) set -o posix ;; -esac - -fi - - - - -# PATH needs CR -# Avoid depending upon Character Ranges. -as_cr_letters='abcdefghijklmnopqrstuvwxyz' -as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' -as_cr_Letters=$as_cr_letters$as_cr_LETTERS -as_cr_digits='0123456789' -as_cr_alnum=$as_cr_Letters$as_cr_digits - -# The user is always right. -if test "${PATH_SEPARATOR+set}" != set; then - echo "#! /bin/sh" >conf$$.sh - echo "exit 0" >>conf$$.sh - chmod +x conf$$.sh - if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then - PATH_SEPARATOR=';' - else - PATH_SEPARATOR=: - fi - rm -f conf$$.sh -fi - -# Support unset when possible. -if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then - as_unset=unset -else - as_unset=false -fi - - -# IFS -# We need space, tab and new line, in precisely that order. Quoting is -# there to prevent editors from complaining about space-tab. -# (If _AS_PATH_WALK were called with IFS unset, it would disable word -# splitting by setting IFS to empty value.) -as_nl=' -' -IFS=" "" $as_nl" - -# Find who we are. Look in the path if we contain no directory separator. -case $0 in - *[\\/]* ) as_myself=$0 ;; - *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break -done -IFS=$as_save_IFS - - ;; -esac -# We did not find ourselves, most probably we were run as `sh COMMAND' -# in which case we are not to be found in the path. -if test "x$as_myself" = x; then - as_myself=$0 -fi -if test ! -f "$as_myself"; then - echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 - { (exit 1); exit 1; } -fi - -# Work around bugs in pre-3.0 UWIN ksh. -for as_var in ENV MAIL MAILPATH -do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var -done -PS1='$ ' -PS2='> ' -PS4='+ ' - -# NLS nuisances. -for as_var in \ - LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \ - LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \ - LC_TELEPHONE LC_TIME -do - if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then - eval $as_var=C; export $as_var - else - ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var - fi -done - -# Required to use basename. -if expr a : '\(a\)' >/dev/null 2>&1 && - test "X`expr 00001 : '.*\(...\)'`" = X001; then - as_expr=expr -else - as_expr=false -fi - -if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then - as_basename=basename -else - as_basename=false -fi - - -# Name of the executable. -as_me=`$as_basename -- "$0" || -$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ - X"$0" : 'X\(//\)$' \| \ - X"$0" : 'X\(/\)' \| . 2>/dev/null || -echo X/"$0" | - sed '/^.*\/\([^/][^/]*\)\/*$/{ - s//\1/ - q - } - /^X\/\(\/\/\)$/{ - s//\1/ - q - } - /^X\/\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - -# CDPATH. -$as_unset CDPATH - - - - as_lineno_1=$LINENO - as_lineno_2=$LINENO - test "x$as_lineno_1" != "x$as_lineno_2" && - test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || { - - # Create $as_me.lineno as a copy of $as_myself, but with $LINENO - # uniformly replaced by the line number. The first 'sed' inserts a - # line-number line after each line using $LINENO; the second 'sed' - # does the real work. The second script uses 'N' to pair each - # line-number line with the line containing $LINENO, and appends - # trailing '-' during substitution so that $LINENO is not a special - # case at line end. - # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the - # scripts with optimization help from Paolo Bonzini. Blame Lee - # E. McMahon (1931-1989) for sed's syntax. :-) - sed -n ' - p - /[$]LINENO/= - ' <$as_myself | - sed ' - s/[$]LINENO.*/&-/ - t lineno - b - :lineno - N - :loop - s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/ - t loop - s/-\n.*// - ' >$as_me.lineno && - chmod +x "$as_me.lineno" || - { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2 - { (exit 1); exit 1; }; } - - # Don't try to exec as it changes $[0], causing all sort of problems - # (the dirname of $[0] is not the place where we might find the - # original and so on. Autoconf is especially sensitive to this). - . "./$as_me.lineno" - # Exit status is that of the last command. - exit -} - - -if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then - as_dirname=dirname -else - as_dirname=false -fi - -ECHO_C= ECHO_N= ECHO_T= -case `echo -n x` in --n*) - case `echo 'x\c'` in - *c*) ECHO_T=' ';; # ECHO_T is single tab character. - *) ECHO_C='\c';; - esac;; -*) - ECHO_N='-n';; -esac - -if expr a : '\(a\)' >/dev/null 2>&1 && - test "X`expr 00001 : '.*\(...\)'`" = X001; then - as_expr=expr -else - as_expr=false -fi - -rm -f conf$$ conf$$.exe conf$$.file -if test -d conf$$.dir; then - rm -f conf$$.dir/conf$$.file -else - rm -f conf$$.dir - mkdir conf$$.dir -fi -echo >conf$$.file -if ln -s conf$$.file conf$$ 2>/dev/null; then - as_ln_s='ln -s' - # ... but there are two gotchas: - # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. - # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. - # In both cases, we have to default to `cp -p'. - ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || - as_ln_s='cp -p' -elif ln conf$$.file conf$$ 2>/dev/null; then - as_ln_s=ln -else - as_ln_s='cp -p' -fi -rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file -rmdir conf$$.dir 2>/dev/null - -if mkdir -p . 2>/dev/null; then - as_mkdir_p=: -else - test -d ./-p && rmdir ./-p - as_mkdir_p=false -fi - -if test -x / >/dev/null 2>&1; then - as_test_x='test -x' -else - if ls -dL / >/dev/null 2>&1; then - as_ls_L_option=L - else - as_ls_L_option= - fi - as_test_x=' - eval sh -c '\'' - if test -d "$1"; then - test -d "$1/."; - else - case $1 in - -*)set "./$1";; - esac; - case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in - ???[sx]*):;;*)false;;esac;fi - '\'' sh - ' -fi -as_executable_p=$as_test_x - -# Sed expression to map a string onto a valid CPP name. -as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" - -# Sed expression to map a string onto a valid variable name. -as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" - - -exec 6>&1 - -# Save the log message, to keep $[0] and so on meaningful, and to -# report actual input values of CONFIG_FILES etc. instead of their -# values after options handling. -ac_log=" -This file was extended by mobile-broadband-provider-info $as_me 20100122, which was -generated by GNU Autoconf 2.61. Invocation command line was - - CONFIG_FILES = $CONFIG_FILES - CONFIG_HEADERS = $CONFIG_HEADERS - CONFIG_LINKS = $CONFIG_LINKS - CONFIG_COMMANDS = $CONFIG_COMMANDS - $ $0 $@ - -on `(hostname || uname -n) 2>/dev/null | sed 1q` -" - -_ACEOF - -cat >>$CONFIG_STATUS <<_ACEOF -# Files that config.status was made for. -config_files="$ac_config_files" - -_ACEOF - -cat >>$CONFIG_STATUS <<\_ACEOF -ac_cs_usage="\ -\`$as_me' instantiates files from templates according to the -current configuration. - -Usage: $0 [OPTIONS] [FILE]... - - -h, --help print this help, then exit - -V, --version print version number and configuration settings, then exit - -q, --quiet do not print progress messages - -d, --debug don't remove temporary files - --recheck update $as_me by reconfiguring in the same conditions - --file=FILE[:TEMPLATE] - instantiate the configuration file FILE - -Configuration files: -$config_files - -Report bugs to ." - -_ACEOF -cat >>$CONFIG_STATUS <<_ACEOF -ac_cs_version="\\ -mobile-broadband-provider-info config.status 20100122 -configured by $0, generated by GNU Autoconf 2.61, - with options \\"`echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`\\" - -Copyright (C) 2006 Free Software Foundation, Inc. -This config.status script is free software; the Free Software Foundation -gives unlimited permission to copy, distribute and modify it." - -ac_pwd='$ac_pwd' -srcdir='$srcdir' -INSTALL='$INSTALL' -MKDIR_P='$MKDIR_P' -_ACEOF - -cat >>$CONFIG_STATUS <<\_ACEOF -# If no file are specified by the user, then we need to provide default -# value. By we need to know if files were specified by the user. -ac_need_defaults=: -while test $# != 0 -do - case $1 in - --*=*) - ac_option=`expr "X$1" : 'X\([^=]*\)='` - ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'` - ac_shift=: - ;; - *) - ac_option=$1 - ac_optarg=$2 - ac_shift=shift - ;; - esac - - case $ac_option in - # Handling of the options. - -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) - ac_cs_recheck=: ;; - --version | --versio | --versi | --vers | --ver | --ve | --v | -V ) - echo "$ac_cs_version"; exit ;; - --debug | --debu | --deb | --de | --d | -d ) - debug=: ;; - --file | --fil | --fi | --f ) - $ac_shift - CONFIG_FILES="$CONFIG_FILES $ac_optarg" - ac_need_defaults=false;; - --he | --h | --help | --hel | -h ) - echo "$ac_cs_usage"; exit ;; - -q | -quiet | --quiet | --quie | --qui | --qu | --q \ - | -silent | --silent | --silen | --sile | --sil | --si | --s) - ac_cs_silent=: ;; - - # This is an error. - -*) { echo "$as_me: error: unrecognized option: $1 -Try \`$0 --help' for more information." >&2 - { (exit 1); exit 1; }; } ;; - - *) ac_config_targets="$ac_config_targets $1" - ac_need_defaults=false ;; - - esac - shift -done - -ac_configure_extra_args= - -if $ac_cs_silent; then - exec 6>/dev/null - ac_configure_extra_args="$ac_configure_extra_args --silent" -fi - -_ACEOF -cat >>$CONFIG_STATUS <<_ACEOF -if \$ac_cs_recheck; then - echo "running CONFIG_SHELL=$SHELL $SHELL $0 "$ac_configure_args \$ac_configure_extra_args " --no-create --no-recursion" >&6 - CONFIG_SHELL=$SHELL - export CONFIG_SHELL - exec $SHELL "$0"$ac_configure_args \$ac_configure_extra_args --no-create --no-recursion -fi - -_ACEOF -cat >>$CONFIG_STATUS <<\_ACEOF -exec 5>>config.log -{ - echo - sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX -## Running $as_me. ## -_ASBOX - echo "$ac_log" -} >&5 - -_ACEOF -cat >>$CONFIG_STATUS <<_ACEOF -_ACEOF - -cat >>$CONFIG_STATUS <<\_ACEOF - -# Handling of arguments. -for ac_config_target in $ac_config_targets -do - case $ac_config_target in - "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;; - "mobile-broadband-provider-info.pc") CONFIG_FILES="$CONFIG_FILES mobile-broadband-provider-info.pc" ;; - - *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5 -echo "$as_me: error: invalid argument: $ac_config_target" >&2;} - { (exit 1); exit 1; }; };; - esac -done - - -# If the user did not use the arguments to specify the items to instantiate, -# then the envvar interface is used. Set only those that are not. -# We use the long form for the default assignment because of an extremely -# bizarre bug on SunOS 4.1.3. -if $ac_need_defaults; then - test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files -fi - -# Have a temporary directory for convenience. Make it in the build tree -# simply because there is no reason against having it here, and in addition, -# creating and moving files from /tmp can sometimes cause problems. -# Hook for its removal unless debugging. -# Note that there is a small window in which the directory will not be cleaned: -# after its creation but before its name has been assigned to `$tmp'. -$debug || -{ - tmp= - trap 'exit_status=$? - { test -z "$tmp" || test ! -d "$tmp" || rm -fr "$tmp"; } && exit $exit_status -' 0 - trap '{ (exit 1); exit 1; }' 1 2 13 15 -} -# Create a (secure) tmp directory for tmp files. - -{ - tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` && - test -n "$tmp" && test -d "$tmp" -} || -{ - tmp=./conf$$-$RANDOM - (umask 077 && mkdir "$tmp") -} || -{ - echo "$me: cannot create a temporary directory in ." >&2 - { (exit 1); exit 1; } -} - -# -# Set up the sed scripts for CONFIG_FILES section. -# - -# No need to generate the scripts if there are no CONFIG_FILES. -# This happens for instance when ./config.status config.h -if test -n "$CONFIG_FILES"; then - -_ACEOF - - - -ac_delim='%!_!# ' -for ac_last_try in false false false false false :; do - cat >conf$$subs.sed <<_ACEOF -SHELL!$SHELL$ac_delim -PATH_SEPARATOR!$PATH_SEPARATOR$ac_delim -PACKAGE_NAME!$PACKAGE_NAME$ac_delim -PACKAGE_TARNAME!$PACKAGE_TARNAME$ac_delim -PACKAGE_VERSION!$PACKAGE_VERSION$ac_delim -PACKAGE_STRING!$PACKAGE_STRING$ac_delim -PACKAGE_BUGREPORT!$PACKAGE_BUGREPORT$ac_delim -exec_prefix!$exec_prefix$ac_delim -prefix!$prefix$ac_delim -program_transform_name!$program_transform_name$ac_delim -bindir!$bindir$ac_delim -sbindir!$sbindir$ac_delim -libexecdir!$libexecdir$ac_delim -datarootdir!$datarootdir$ac_delim -datadir!$datadir$ac_delim -sysconfdir!$sysconfdir$ac_delim -sharedstatedir!$sharedstatedir$ac_delim -localstatedir!$localstatedir$ac_delim -includedir!$includedir$ac_delim -oldincludedir!$oldincludedir$ac_delim -docdir!$docdir$ac_delim -infodir!$infodir$ac_delim -htmldir!$htmldir$ac_delim -dvidir!$dvidir$ac_delim -pdfdir!$pdfdir$ac_delim -psdir!$psdir$ac_delim -libdir!$libdir$ac_delim -localedir!$localedir$ac_delim -mandir!$mandir$ac_delim -DEFS!$DEFS$ac_delim -ECHO_C!$ECHO_C$ac_delim -ECHO_N!$ECHO_N$ac_delim -ECHO_T!$ECHO_T$ac_delim -LIBS!$LIBS$ac_delim -build_alias!$build_alias$ac_delim -host_alias!$host_alias$ac_delim -target_alias!$target_alias$ac_delim -INSTALL_PROGRAM!$INSTALL_PROGRAM$ac_delim -INSTALL_SCRIPT!$INSTALL_SCRIPT$ac_delim -INSTALL_DATA!$INSTALL_DATA$ac_delim -am__isrc!$am__isrc$ac_delim -CYGPATH_W!$CYGPATH_W$ac_delim -PACKAGE!$PACKAGE$ac_delim -VERSION!$VERSION$ac_delim -ACLOCAL!$ACLOCAL$ac_delim -AUTOCONF!$AUTOCONF$ac_delim -AUTOMAKE!$AUTOMAKE$ac_delim -AUTOHEADER!$AUTOHEADER$ac_delim -MAKEINFO!$MAKEINFO$ac_delim -install_sh!$install_sh$ac_delim -STRIP!$STRIP$ac_delim -INSTALL_STRIP_PROGRAM!$INSTALL_STRIP_PROGRAM$ac_delim -mkdir_p!$mkdir_p$ac_delim -AWK!$AWK$ac_delim -SET_MAKE!$SET_MAKE$ac_delim -am__leading_dot!$am__leading_dot$ac_delim -AMTAR!$AMTAR$ac_delim -am__tar!$am__tar$ac_delim -am__untar!$am__untar$ac_delim -MAINTAINER_MODE_TRUE!$MAINTAINER_MODE_TRUE$ac_delim -MAINTAINER_MODE_FALSE!$MAINTAINER_MODE_FALSE$ac_delim -MAINT!$MAINT$ac_delim -LIBOBJS!$LIBOBJS$ac_delim -LTLIBOBJS!$LTLIBOBJS$ac_delim -_ACEOF - - if test `sed -n "s/.*$ac_delim\$/X/p" conf$$subs.sed | grep -c X` = 64; then - break - elif $ac_last_try; then - { { echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5 -echo "$as_me: error: could not make $CONFIG_STATUS" >&2;} - { (exit 1); exit 1; }; } - else - ac_delim="$ac_delim!$ac_delim _$ac_delim!! " - fi -done - -ac_eof=`sed -n '/^CEOF[0-9]*$/s/CEOF/0/p' conf$$subs.sed` -if test -n "$ac_eof"; then - ac_eof=`echo "$ac_eof" | sort -nru | sed 1q` - ac_eof=`expr $ac_eof + 1` -fi - -cat >>$CONFIG_STATUS <<_ACEOF -cat >"\$tmp/subs-1.sed" <<\CEOF$ac_eof -/@[a-zA-Z_][a-zA-Z_0-9]*@/!b end -_ACEOF -sed ' -s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g -s/^/s,@/; s/!/@,|#_!!_#|/ -:n -t n -s/'"$ac_delim"'$/,g/; t -s/$/\\/; p -N; s/^.*\n//; s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g; b n -' >>$CONFIG_STATUS >$CONFIG_STATUS <<_ACEOF -:end -s/|#_!!_#|//g -CEOF$ac_eof -_ACEOF - - -# VPATH may cause trouble with some makes, so we remove $(srcdir), -# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and -# trailing colons and then remove the whole line if VPATH becomes empty -# (actually we leave an empty line to preserve line numbers). -if test "x$srcdir" = x.; then - ac_vpsub='/^[ ]*VPATH[ ]*=/{ -s/:*\$(srcdir):*/:/ -s/:*\${srcdir}:*/:/ -s/:*@srcdir@:*/:/ -s/^\([^=]*=[ ]*\):*/\1/ -s/:*$// -s/^[^=]*=[ ]*$// -}' -fi - -cat >>$CONFIG_STATUS <<\_ACEOF -fi # test -n "$CONFIG_FILES" - - -for ac_tag in :F $CONFIG_FILES -do - case $ac_tag in - :[FHLC]) ac_mode=$ac_tag; continue;; - esac - case $ac_mode$ac_tag in - :[FHL]*:*);; - :L* | :C*:*) { { echo "$as_me:$LINENO: error: Invalid tag $ac_tag." >&5 -echo "$as_me: error: Invalid tag $ac_tag." >&2;} - { (exit 1); exit 1; }; };; - :[FH]-) ac_tag=-:-;; - :[FH]*) ac_tag=$ac_tag:$ac_tag.in;; - esac - ac_save_IFS=$IFS - IFS=: - set x $ac_tag - IFS=$ac_save_IFS - shift - ac_file=$1 - shift - - case $ac_mode in - :L) ac_source=$1;; - :[FH]) - ac_file_inputs= - for ac_f - do - case $ac_f in - -) ac_f="$tmp/stdin";; - *) # Look for the file first in the build tree, then in the source tree - # (if the path is not absolute). The absolute path cannot be DOS-style, - # because $ac_f cannot contain `:'. - test -f "$ac_f" || - case $ac_f in - [\\/$]*) false;; - *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";; - esac || - { { echo "$as_me:$LINENO: error: cannot find input file: $ac_f" >&5 -echo "$as_me: error: cannot find input file: $ac_f" >&2;} - { (exit 1); exit 1; }; };; - esac - ac_file_inputs="$ac_file_inputs $ac_f" - done - - # Let's still pretend it is `configure' which instantiates (i.e., don't - # use $as_me), people would be surprised to read: - # /* config.h. Generated by config.status. */ - configure_input="Generated from "`IFS=: - echo $* | sed 's|^[^:]*/||;s|:[^:]*/|, |g'`" by configure." - if test x"$ac_file" != x-; then - configure_input="$ac_file. $configure_input" - { echo "$as_me:$LINENO: creating $ac_file" >&5 -echo "$as_me: creating $ac_file" >&6;} - fi - - case $ac_tag in - *:-:* | *:-) cat >"$tmp/stdin";; - esac - ;; - esac - - ac_dir=`$as_dirname -- "$ac_file" || -$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$ac_file" : 'X\(//\)[^/]' \| \ - X"$ac_file" : 'X\(//\)$' \| \ - X"$ac_file" : 'X\(/\)' \| . 2>/dev/null || -echo X"$ac_file" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - { as_dir="$ac_dir" - case $as_dir in #( - -*) as_dir=./$as_dir;; - esac - test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || { - as_dirs= - while :; do - case $as_dir in #( - *\'*) as_qdir=`echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #( - *) as_qdir=$as_dir;; - esac - as_dirs="'$as_qdir' $as_dirs" - as_dir=`$as_dirname -- "$as_dir" || -$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$as_dir" : 'X\(//\)[^/]' \| \ - X"$as_dir" : 'X\(//\)$' \| \ - X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || -echo X"$as_dir" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - test -d "$as_dir" && break - done - test -z "$as_dirs" || eval "mkdir $as_dirs" - } || test -d "$as_dir" || { { echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5 -echo "$as_me: error: cannot create directory $as_dir" >&2;} - { (exit 1); exit 1; }; }; } - ac_builddir=. - -case "$ac_dir" in -.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; -*) - ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` - # A ".." for each directory in $ac_dir_suffix. - ac_top_builddir_sub=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,/..,g;s,/,,'` - case $ac_top_builddir_sub in - "") ac_top_builddir_sub=. ac_top_build_prefix= ;; - *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; - esac ;; -esac -ac_abs_top_builddir=$ac_pwd -ac_abs_builddir=$ac_pwd$ac_dir_suffix -# for backward compatibility: -ac_top_builddir=$ac_top_build_prefix - -case $srcdir in - .) # We are building in place. - ac_srcdir=. - ac_top_srcdir=$ac_top_builddir_sub - ac_abs_top_srcdir=$ac_pwd ;; - [\\/]* | ?:[\\/]* ) # Absolute name. - ac_srcdir=$srcdir$ac_dir_suffix; - ac_top_srcdir=$srcdir - ac_abs_top_srcdir=$srcdir ;; - *) # Relative name. - ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix - ac_top_srcdir=$ac_top_build_prefix$srcdir - ac_abs_top_srcdir=$ac_pwd/$srcdir ;; -esac -ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix - - - case $ac_mode in - :F) - # - # CONFIG_FILE - # - - case $INSTALL in - [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;; - *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;; - esac - ac_MKDIR_P=$MKDIR_P - case $MKDIR_P in - [\\/$]* | ?:[\\/]* ) ;; - */*) ac_MKDIR_P=$ac_top_build_prefix$MKDIR_P ;; - esac -_ACEOF - -cat >>$CONFIG_STATUS <<\_ACEOF -# If the template does not know about datarootdir, expand it. -# FIXME: This hack should be removed a few years after 2.60. -ac_datarootdir_hack=; ac_datarootdir_seen= - -case `sed -n '/datarootdir/ { - p - q -} -/@datadir@/p -/@docdir@/p -/@infodir@/p -/@localedir@/p -/@mandir@/p -' $ac_file_inputs` in -*datarootdir*) ac_datarootdir_seen=yes;; -*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*) - { echo "$as_me:$LINENO: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5 -echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;} -_ACEOF -cat >>$CONFIG_STATUS <<_ACEOF - ac_datarootdir_hack=' - s&@datadir@&$datadir&g - s&@docdir@&$docdir&g - s&@infodir@&$infodir&g - s&@localedir@&$localedir&g - s&@mandir@&$mandir&g - s&\\\${datarootdir}&$datarootdir&g' ;; -esac -_ACEOF - -# Neutralize VPATH when `$srcdir' = `.'. -# Shell code in configure.ac might set extrasub. -# FIXME: do we really want to maintain this feature? -cat >>$CONFIG_STATUS <<_ACEOF - sed "$ac_vpsub -$extrasub -_ACEOF -cat >>$CONFIG_STATUS <<\_ACEOF -:t -/@[a-zA-Z_][a-zA-Z_0-9]*@/!b -s&@configure_input@&$configure_input&;t t -s&@top_builddir@&$ac_top_builddir_sub&;t t -s&@srcdir@&$ac_srcdir&;t t -s&@abs_srcdir@&$ac_abs_srcdir&;t t -s&@top_srcdir@&$ac_top_srcdir&;t t -s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t -s&@builddir@&$ac_builddir&;t t -s&@abs_builddir@&$ac_abs_builddir&;t t -s&@abs_top_builddir@&$ac_abs_top_builddir&;t t -s&@INSTALL@&$ac_INSTALL&;t t -s&@MKDIR_P@&$ac_MKDIR_P&;t t -$ac_datarootdir_hack -" $ac_file_inputs | sed -f "$tmp/subs-1.sed" >$tmp/out - -test -z "$ac_datarootdir_hack$ac_datarootdir_seen" && - { ac_out=`sed -n '/\${datarootdir}/p' "$tmp/out"`; test -n "$ac_out"; } && - { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' "$tmp/out"`; test -z "$ac_out"; } && - { echo "$as_me:$LINENO: WARNING: $ac_file contains a reference to the variable \`datarootdir' -which seems to be undefined. Please make sure it is defined." >&5 -echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir' -which seems to be undefined. Please make sure it is defined." >&2;} - - rm -f "$tmp/stdin" - case $ac_file in - -) cat "$tmp/out"; rm -f "$tmp/out";; - *) rm -f "$ac_file"; mv "$tmp/out" $ac_file;; - esac - ;; - - - - esac - -done # for ac_tag - - -{ (exit 0); exit 0; } -_ACEOF -chmod +x $CONFIG_STATUS -ac_clean_files=$ac_clean_files_save - - -# configure is writing to config.log, and then calls config.status. -# config.status does its own redirection, appending to config.log. -# Unfortunately, on DOS this fails, as config.log is still kept open -# by configure, so config.status won't be able to write to it; its -# output is simply discarded. So we exec the FD to /dev/null, -# effectively closing config.log, so it can be properly (re)opened and -# appended to by config.status. When coming back to configure, we -# need to make the FD available again. -if test "$no_create" != yes; then - ac_cs_success=: - ac_config_status_args= - test "$silent" = yes && - ac_config_status_args="$ac_config_status_args --quiet" - exec 5>/dev/null - $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false - exec 5>>config.log - # Use ||, not &&, to avoid exiting from the if with $? = 1, which - # would make configure fail if this is the last instruction. - $ac_cs_success || { (exit 1); exit 1; } -fi - diff -Nru mobile-broadband-provider-info-20100407/configure.ac mobile-broadband-provider-info-git.20100622t053426.75f8fc9/configure.ac --- mobile-broadband-provider-info-20100407/configure.ac 2010-04-07 15:28:17.000000000 +0100 +++ mobile-broadband-provider-info-git.20100622t053426.75f8fc9/configure.ac 2010-06-26 00:27:44.000000000 +0100 @@ -1,6 +1,6 @@ AC_PREREQ(2.52) -AC_INIT(mobile-broadband-provider-info, 20100122, dcbw@redhat.com, mobile-broadband-provider-info) +AC_INIT(mobile-broadband-provider-info, 20100510, dcbw@redhat.com, mobile-broadband-provider-info) AM_INIT_AUTOMAKE([-Wall -Werror foreign no-dist-gzip dist-bzip2]) AM_MAINTAINER_MODE diff -Nru mobile-broadband-provider-info-20100407/debian/changelog mobile-broadband-provider-info-git.20100622t053426.75f8fc9/debian/changelog --- mobile-broadband-provider-info-20100407/debian/changelog 2010-04-08 05:59:14.000000000 +0100 +++ mobile-broadband-provider-info-git.20100622t053426.75f8fc9/debian/changelog 2010-06-26 01:00:41.000000000 +0100 @@ -1,89 +1,97 @@ -mobile-broadband-provider-info (20100407-1) unstable; urgency=low +mobile-broadband-provider-info (git.20100622t053426.75f8fc9-0ubuntu1~mtrudel1~lucid) lucid; urgency=low - * Switch to dpkg-source 3.0 (quilt) format - * Merging upstream version 20100407 from git + * Add rules and variables for daily builds from git. + - update debian/rules + * upstream snapshot 2010-06-22 05:34:26 (GMT) + + 75f8fc984a1b3f97189d3450d141e53fd941568f - -- Bhavani Shankar Wed, 07 Apr 2010 19:59:50 +0530 + -- Mathieu Trudel-Lapierre Fri, 25 Jun 2010 19:29:00 -0400 -mobile-broadband-provider-info (20100316-1) unstable; urgency=low +mobile-broadband-provider-info (20091009-0ubuntu1) karmic; urgency=low + + * New upstream data (20091009) - 35ef359c591cccd99380225fa431855b16a12edc + * fix ftbfs in karmic; use fixed automake version 1.11 + - update debian/control + - update debian/rules - * Merging upstream version 20100316 from git + -- Alexander Sack Fri, 09 Oct 2009 11:04:27 +0200 - -- Bhavani Shankar Tue, 16 Mar 2010 10:38:41 +0530 +mobile-broadband-provider-info (20090622-0ubuntu1) karmic; urgency=low -mobile-broadband-provider-info (20100302-1) unstable; urgency=low + * New upstream release (22 Jun 09) - 231ddeed8913a5112eb93dcd95db75a77ede53fb + * fix clean tarball build by touching aclocal.m4 in pre-build:: target + - update debian/rules + * drop mobile-broadband-provider-info-dev package + - update debian/control + - remove debian/mobile-broadband-provider-info-dev.install + * dont explicitly set DEB_DH_INSTALL_SOURCEDIR to debian/tmp in rules + as we only build one binary package now + - update debian/rules + * drop debian/mobile-broadband-provider-info.install + * add Breaks: libmbca0 which cannot handle new database format + - update debian/control - * Merging upstream version 20100302 from git + -- Alexander Sack Tue, 04 Aug 2009 11:05:37 +0200 - -- Bhavani Shankar Tue, 02 Mar 2010 21:27:42 +0530 +mobile-broadband-provider-info (20090309-0ubuntu1) jaunty; urgency=low -mobile-broadband-provider-info (20100216-1) unstable; urgency=low + * Update to svn head (r90), which corresponds to the 20090309 release (LP: + #317860). This brings a lot of provider updates. (LP: #264708, #282155, + #284426, #287115, #288308, #289694, #291225, #308281, #311794, #289511, + #311794, #294096, #296448, #303367, #304476, #304478, #279927, #302854, + #302858, #306666, #310576). - * Merging upstream version 20100216 from git - * Updating Maintainer address - * Updating standards to 3.8.4. No other changes - * Updating email address in copyright + -- Martin Pitt Mon, 16 Mar 2009 10:54:49 +0100 - -- Bhavani Shankar Tue, 16 Feb 2010 06:41:04 +0530 +mobile-broadband-provider-info (20081015.1-0ubuntu1) intrepid; urgency=low -mobile-broadband-provider-info (20100126-1) unstable; urgency=low + * new upstream snapshot to get latest pre-release provider info + (http://bzr-mirror.gnome.org/mobile-broadband-provider-info/trunk@31) + + LP: #274790 United Kingdom O2 contract username incorrect + + LP: #277455 New mobile phone provider in Spain + + LP: #279183 o2 cannot be spelled 'O2' - * The New year release - * Merging upstream version 20100126 from git - * Updating year in copyright file + -- Alexander Sack Tue, 21 Oct 2008 15:11:35 +0200 - -- Bhavani Shankar Tue, 26 Jan 2010 19:59:01 +0530 +mobile-broadband-provider-info (20080822.1-0ubuntu2) intrepid; urgency=low -mobile-broadband-provider-info (20091207-1) unstable; urgency=low + * debian/control: add Vcs-Bzr: + http://code.launchpad.net/~network-manager/mobile-broadband-provider-info/mobile-broadband-provider-info.ubuntu + * debian/rules, debian/control, aclocal.m4: enable build with tarball from + upstream bzr by auto-recreating autotools files during build. To trigger + this we define the DEB_AUTO_UPDATE_* cdbs variables accordingly. On top we + add automake to the build-depends and create a dummy aclocal.m4 file to + trick cdbs into rerunning aclocal. - * Merging upstream version 20091207 from git. + -- Alexander Sack Mon, 01 Sep 2008 17:06:19 +0200 - -- Bhavani Shankar Mon, 07 Dec 2009 15:07:36 +0530 +mobile-broadband-provider-info (20080822.1-0ubuntu1) intrepid; urgency=low -mobile-broadband-provider-info (20090908-1) unstable; urgency=low + * new upstream release + * fixed package versioning - [Kartik Mistry] - * Do not use README.Debian, note in debian/watch file is enough - * debian/copyright: - + Added missing copyright year for Bhavani Shankar - * debian/control: - + Removed cdbs from Build-Depends - [Bhavani Shankar] - * New Maintainer. Closes: #543851 - * Merging upstream version 20090908 from git. - * Modify long description of the package. Thanks to lintian. - * Add a dummy watch file and a description of the same in README.Debian - (Thanks to Kartik Mistry for the tip.) - * Add my name to debian/copyright. + -- Antti Kaijanmäki (Wellark) Fri, 22 Aug 2008 14:09:17 +0300 - -- Bhavani Shankar Fri, 11 Sep 2009 09:45:36 +0530 +mobile-broadband-provider-info (20080814~intrepid) intrepid; urgency=low -mobile-broadband-provider-info (20090801-2) unstable; urgency=low + * first upstream release - * Adding missing build-depends to libxml2-utils (Closes: #543033). - * Updating package to standards version 3.8.3. - * Removing vcs fields. - * Orphaning package. + -- Antti Kaijanmäki (Wellark) Thu, 14 Aug 2008 11:30:00 +0300 - -- Daniel Baumann Thu, 27 Aug 2009 08:19:17 +0200 +mobile-broadband-provider-info (20080723-0ubuntu1) intrepid; urgency=low -mobile-broadband-provider-info (20090801-1) unstable; urgency=low + * first intrepid package - * Updating upstream target in rules. - * Merging upstream version 20090801. + -- Antti Kaijanmäki (Wellark) Wed, 23 Jul 2008 08:40:05 +0300 - -- Daniel Baumann Mon, 03 Aug 2009 00:57:02 +0200 +mobile-broadband-provider-info (20080722) hardy; urgency=low -mobile-broadband-provider-info (20090601-2) unstable; urgency=low + * move from universe to main - * Updating package to standards version 3.8.2. - * Adding misc depends. - * Minimizing rules file. + -- Antti Kaijanmäki (Wellark) Tue, 22 Jul 2008 20:37:27 +0300 - -- Daniel Baumann Wed, 29 Jul 2009 23:13:21 +0200 +mobile-broadband-provider-info (20080721) hardy; urgency=low -mobile-broadband-provider-info (20090601-1) unstable; urgency=low + * Initial release - * Initial release. - - -- Daniel Baumann Wed, 03 Jun 2009 16:10:00 +0200 + -- Antti Kaijanmäki (Wellark) Tue, 22 Jul 2008 13:07:45 +0300 diff -Nru mobile-broadband-provider-info-20100407/debian/compat mobile-broadband-provider-info-git.20100622t053426.75f8fc9/debian/compat --- mobile-broadband-provider-info-20100407/debian/compat 2010-04-07 15:29:07.000000000 +0100 +++ mobile-broadband-provider-info-git.20100622t053426.75f8fc9/debian/compat 2010-06-26 01:00:41.000000000 +0100 @@ -1 +1 @@ -7 +5 diff -Nru mobile-broadband-provider-info-20100407/debian/control mobile-broadband-provider-info-git.20100622t053426.75f8fc9/debian/control --- mobile-broadband-provider-info-20100407/debian/control 2010-04-07 15:29:07.000000000 +0100 +++ mobile-broadband-provider-info-git.20100622t053426.75f8fc9/debian/control 2010-06-26 01:00:41.000000000 +0100 @@ -1,15 +1,19 @@ Source: mobile-broadband-provider-info Section: admin -Priority: optional -Maintainer: Bhavani Shankar -Build-Depends: debhelper (>= 7.0.50~), autotools-dev, libxml2-utils -Standards-Version: 3.8.4 +Priority: extra +Maintainer: Ubuntu MOTU Developers +XSBC-Original-Maintainer: Antti Kaijanmäki (Wellark) +Build-Depends: cdbs, debhelper (>= 5), autotools-dev, automake1.11 +Standards-Version: 3.7.3 +Vcs-Bzr: http://code.launchpad.net/~network-manager/mobile-broadband-provider-info/mobile-broadband-provider-info.ubuntu +Vcs-Svn: http://svn.gnome.org/svn/mobile-broadband-provider-info/trunk +Vcs-Browser: http://svn.gnome.org/viewvc/mobile-broadband-provider-info/trunk/ Homepage: http://live.gnome.org/NetworkManager/MobileBroadband/ServiceProviders Package: mobile-broadband-provider-info Architecture: all -Depends: ${misc:Depends} +Breaks: libmbca0 Description: database of mobile broadband service providers - This package contains database of service provider specific settings of mobile - broadband providers in different countries. Through Network Manager thus making - it easy for users to choose thier mobile broadband service provider. + Contains service provider specific settings of mobile broadband providers in + different countries. + diff -Nru mobile-broadband-provider-info-20100407/debian/copyright mobile-broadband-provider-info-git.20100622t053426.75f8fc9/debian/copyright --- mobile-broadband-provider-info-20100407/debian/copyright 2010-04-07 15:29:07.000000000 +0100 +++ mobile-broadband-provider-info-git.20100622t053426.75f8fc9/debian/copyright 2010-06-26 01:00:41.000000000 +0100 @@ -1,40 +1,45 @@ -Author: Antti Kaijanmaki -Download: http://live.gnome.org/NetworkManager/MobileBroadband/ServiceProviders +This package was debianized by Antti Kaijanmäki on +Tue, 22 Jul 2008 13:05:28 +0300. -Files: * -Copyright: (C) 2008-2009 Antti Kaijanmaki -License: PD - THIS WORK IS IN PUBLIC DOMAIN: - The person or persons who have associated work with this document - (the "Dedicator" or "Certifier") hereby either (a) certifies that, to the best - of his knowledge, the work of authorship identified is in the public domain of - the country from which the work is published, or (b) hereby dedicates whatever - copyright the dedicators holds in the work of authorship identified below - (the "Work") to the public domain. A certifier, moreover, dedicates any - copyright interest he may have in the associated work, and for these purposes, - is described as a "dedicator" below. - . - A certifier has taken reasonable steps to verify the copyright status of this - work. Certifier recognizes that his good faith efforts may not shield him from - liability if in fact the work certified is not in the public domain. - . - Dedicator makes this dedication for the benefit of the public at large and to - the detriment of the Dedicator's heirs and successors. Dedicator intends this - dedication to be an overt act of relinquishment in perpetuity of all present - and future rights under copyright law, whether vested or contingent, in the - Work. Dedicator understands that such relinquishment of all rights includes the - relinquishment of all rights to enforce (by lawsuit or otherwise) those - copyrights in the Work. - . - Dedicator recognizes that, once placed in the public domain, the Work may be - freely reproduced, distributed, transmitted, used, modified, built upon, or - otherwise exploited by anyone for any purpose, commercial or non-commercial, - and in any way, including by methods that have not yet been invented or - conceived. - -Files: debian/* -Copyright: (C) 2009 Daniel Baumann - (C) 2009-2010 Bhavani Shankar -License: PD - The Debian packaging is hereby placed in the public domain (no rights - reserved). +It was downloaded from: http://svn.gnome.org/viewvc/mobile-broadband-provider-info/trunk/ + +Upstream Author: + + Antti Kaijanmäki + +Copyright: + + + +License: + + THIS WORK IS IN PUBLIC DOMAIN: + The person or persons who have associated work with this document + (the "Dedicator" or "Certifier") hereby either (a) certifies that, to the best + of his knowledge, the work of authorship identified is in the public domain of + the country from which the work is published, or (b) hereby dedicates whatever + copyright the dedicators holds in the work of authorship identified below + (the "Work") to the public domain. A certifier, moreover, dedicates any + copyright interest he may have in the associated work, and for these purposes, + is described as a "dedicator" below. + . + A certifier has taken reasonable steps to verify the copyright status of this + work. Certifier recognizes that his good faith efforts may not shield him from + liability if in fact the work certified is not in the public domain. + . + Dedicator makes this dedication for the benefit of the public at large and to + the detriment of the Dedicator's heirs and successors. Dedicator intends this + dedication to be an overt act of relinquishment in perpetuity of all present + and future rights under copyright law, whether vested or contingent, in the + Work. Dedicator understands that such relinquishment of all rights includes the + relinquishment of all rights to enforce (by lawsuit or otherwise) those + copyrights in the Work. + . + Dedicator recognizes that, once placed in the public domain, the Work may be + freely reproduced, distributed, transmitted, used, modified, built upon, or + otherwise exploited by anyone for any purpose, commercial or non-commercial, + and in any way, including by methods that have not yet been invented or + conceived. + +The Debian packaging is (C) 2008, Antti Kaijanmäki and +is licensed under the GPL, see `/usr/share/common-licenses/GPL'. diff -Nru mobile-broadband-provider-info-20100407/debian/docs mobile-broadband-provider-info-git.20100622t053426.75f8fc9/debian/docs --- mobile-broadband-provider-info-20100407/debian/docs 1970-01-01 01:00:00.000000000 +0100 +++ mobile-broadband-provider-info-git.20100622t053426.75f8fc9/debian/docs 2010-06-26 01:00:41.000000000 +0100 @@ -0,0 +1 @@ +README diff -Nru mobile-broadband-provider-info-20100407/debian/mobile-broadband-provider-info.docs mobile-broadband-provider-info-git.20100622t053426.75f8fc9/debian/mobile-broadband-provider-info.docs --- mobile-broadband-provider-info-20100407/debian/mobile-broadband-provider-info.docs 2010-04-07 15:29:07.000000000 +0100 +++ mobile-broadband-provider-info-git.20100622t053426.75f8fc9/debian/mobile-broadband-provider-info.docs 1970-01-01 01:00:00.000000000 +0100 @@ -1,2 +0,0 @@ -NEWS -README diff -Nru mobile-broadband-provider-info-20100407/debian/rules mobile-broadband-provider-info-git.20100622t053426.75f8fc9/debian/rules --- mobile-broadband-provider-info-20100407/debian/rules 2010-04-07 15:29:07.000000000 +0100 +++ mobile-broadband-provider-info-git.20100622t053426.75f8fc9/debian/rules 2010-06-26 01:00:41.000000000 +0100 @@ -1,19 +1,74 @@ #!/usr/bin/make -f -DATE=$(shell date +%Y%m%d) +DEB_SOURCE := $(shell dpkg-parsechangelog | grep Source: | sed -e 's/Source: //') +DEB_VERSION := $(shell dpkg-parsechangelog | grep Version: | sed -e 's/Version: //') +DEB_UPSTREAM_VERSION := $(shell echo $(DEB_VERSION) | sed -e 's/-[^-]*$$//') +DEB_MAJOR_VERSION := $(shell echo $(DEB_UPSTREAM_VERSION) | sed -e 's/git.*//') -%: - dh ${@} +DEB_AUTO_UPDATE_ACLOCAL = 1.11 +DEB_AUTO_UPDATE_AUTOMAKE = 1.11 -a -c -f +DEB_AUTO_UPDATE_AUTOCONF = 2.50 -upstream: - # Needs: automake git-core - cd .. && \ - git clone git://git.gnome.org/mobile-broadband-provider-info && \ - mv mobile-broadband-provider-info mobile-broadband-provider-info-$(DATE) - - cd ../mobile-broadband-provider-info-$(DATE) && \ - rm -rf .git && \ - autoreconf -i && \ - rm -rf autom4te.cache +include /usr/share/cdbs/1/rules/debhelper.mk +include /usr/share/cdbs/1/class/autotools.mk +include /usr/share/cdbs/1/rules/simple-patchsys.mk - tar cfz ../mobile-broadband-provider-info_$(DATE).orig.tar.gz ../mobile-broadband-provider-info-$(DATE) +pre-build:: + if ! test -e aclocal.m4; then touch aclocal.m4; fi + +GIT_URL := git://git.gnome.org/mobile-broadband-provider-info +GIT_BRANCH := "master" +GIT_BRANCH_NAME := mobile-broadband-provider-info + +ifneq (,$(LOCAL_BRANCH)) +LOCAL_REAL_BRANCH = $(realpath $(LOCAL_BRANCH)) +endif + +GET_SOURCE = \ + set -e; \ + tmpdir=`mktemp -d -t`; \ + cd $$tmpdir; \ + echo "cloning upstream repository ..."; \ + git clone -b $(GIT_BRANCH) $(if $(LOCAL_BRANCH),$(call LOCAL_REAL_BRANCH)/$(GIT_BRANCH_NAME),$(GIT_URL)) $(GIT_BRANCH_NAME); \ + echo "getting specific upstream revision/tag: $(1)"; \ + cd `ls | head -n 1`; git checkout -b orig $(1); \ + commit_id=`git log -n1 --abbrev-commit | grep '^commit ' | sed -e 's/commit //' | sed -e 's/\.\.\.$$//'`; \ + raw=`date --utc --date="$$(git log --pretty=fuller -n1 --date=rfc | grep CommitDate: | sed -e 's/CommitDate:[^0-9]*//')" "+%Y%m%dt%H%M%S"`; \ + if echo $(1) | grep -q -c "orig" || echo $(DEB_VERSION) | grep -q -c "git"; \ + then \ + upstream_version=$(DEB_MAJOR_VERSION)git.$$raw.$$commit_id; \ + else \ + upstream_version=$(DEB_UPSTREAM_VERSION); \ + fi; \ + cd ..; tar --exclude=.git -czf $(CURDIR)/$(DEB_SOURCE)_$$upstream_version.orig.tar.gz `ls | head -n 1`; \ + cd $(CURDIR); rm -rf $$tmpdir; + +get-current-source:: $(if $(LOCAL_BRANCH),update-local-branch) + set -e; if echo $(DEB_VERSION) | grep -q -c "git"; \ + then \ + git_version=`echo $(DEB_VERSION) | sed -e 's/^.*git\.*\([0-9t]*\)\.\(.*\)-.*$$/\2/g'`; \ + elif echo $(DEB_VERSION) | grep -q -c "~rc"; \ + then \ + git_version=`echo $(DEB_VERSION) | sed -e 's/^\([0-9\.]*\)\(~rc\)\([0-9]\)-.*$$/\1-rc\3/'`; \ + else \ + git_version=$(DEB_UPSTREAM_VERSION); \ + fi; \ + $(call GET_SOURCE, $$git_version, "current") + +get-orig-source:: $(if $(LOCAL_BRANCH),update-local-branch) + $(call GET_SOURCE, $(GIT_BRANCH), "orig") + +update-local-branch:: + @echo "updating local branch ($(LOCAL_BRANCH))" + @set -e; if ! test -d $(LOCAL_BRANCH); then mkdir -p $(LOCAL_BRANCH); fi + @set -e; if ! test -d $(LOCAL_BRANCH)/$(GIT_BRANCH_NAME); then git clone $(GIT_URL) $(LOCAL_BRANCH)/$(GIT_BRANCH_NAME); fi + @set -e; cd $(LOCAL_BRANCH)/$(GIT_BRANCH_NAME); if ! `git branch | grep -q -c "$(GIT_BRANCH)"`; then git branch $(GIT_BRANCH) remotes/origin/$(GIT_BRANCH); fi + @set -e; cd $(LOCAL_BRANCH)/$(GIT_BRANCH_NAME); git pull -f + @echo "updated local branch ($(LOCAL_BRANCH))" + +get-snapshot-info:: $(if $(LOCAL_BRANCH),update-local-branch) + @set -e; \ + git_version=`echo $(DEB_VERSION) | sed -e 's/^.*git\.*\([0-9t]*\)\.\(.*\)-.*$$/\2/g'`; \ + cd $(LOCAL_BRANCH)/$(GIT_BRANCH_NAME); \ + raw=`date --utc --date="$$(git log --pretty=fuller -n1 --date=rfc $$git_version | grep CommitDate: | sed -e 's/CommitDate:[^0-9]*//')" "+%Y-%m-%d %H:%M:%S (GMT)"`; \ + git log -n1 $$git_version --format="%n%s%n%n * upstream snapshot $$raw%n + %H%n"; diff -Nru mobile-broadband-provider-info-20100407/debian/source/format mobile-broadband-provider-info-git.20100622t053426.75f8fc9/debian/source/format --- mobile-broadband-provider-info-20100407/debian/source/format 2010-06-26 01:00:41.000000000 +0100 +++ mobile-broadband-provider-info-git.20100622t053426.75f8fc9/debian/source/format 1970-01-01 01:00:00.000000000 +0100 @@ -1 +0,0 @@ -3.0 (quilt) diff -Nru mobile-broadband-provider-info-20100407/debian/watch mobile-broadband-provider-info-git.20100622t053426.75f8fc9/debian/watch --- mobile-broadband-provider-info-20100407/debian/watch 2010-04-07 15:29:07.000000000 +0100 +++ mobile-broadband-provider-info-git.20100622t053426.75f8fc9/debian/watch 1970-01-01 01:00:00.000000000 +0100 @@ -1,3 +0,0 @@ -# There is an existance of a dummy watch file so as to satisfy lintian as this -# package is maintained in a git clone repository and not a upstream website and -# the rules file already has the upstream target based on git clone repository. diff -Nru mobile-broadband-provider-info-20100407/install-sh mobile-broadband-provider-info-git.20100622t053426.75f8fc9/install-sh --- mobile-broadband-provider-info-20100407/install-sh 2010-04-07 15:28:20.000000000 +0100 +++ mobile-broadband-provider-info-git.20100622t053426.75f8fc9/install-sh 1970-01-01 01:00:00.000000000 +0100 @@ -1,519 +0,0 @@ -#!/bin/sh -# install - install a program, script, or datafile - -scriptversion=2006-12-25.00 - -# This originates from X11R5 (mit/util/scripts/install.sh), which was -# later released in X11R6 (xc/config/util/install.sh) with the -# following copyright and license. -# -# Copyright (C) 1994 X Consortium -# -# Permission is hereby granted, free of charge, to any person obtaining a copy -# of this software and associated documentation files (the "Software"), to -# deal in the Software without restriction, including without limitation the -# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or -# sell copies of the Software, and to permit persons to whom the Software is -# furnished to do so, subject to the following conditions: -# -# The above copyright notice and this permission notice shall be included in -# all copies or substantial portions of the Software. -# -# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR -# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, -# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE -# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN -# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC- -# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. -# -# Except as contained in this notice, the name of the X Consortium shall not -# be used in advertising or otherwise to promote the sale, use or other deal- -# ings in this Software without prior written authorization from the X Consor- -# tium. -# -# -# FSF changes to this file are in the public domain. -# -# Calling this script install-sh is preferred over install.sh, to prevent -# `make' implicit rules from creating a file called install from it -# when there is no Makefile. -# -# This script is compatible with the BSD install script, but was written -# from scratch. - -nl=' -' -IFS=" "" $nl" - -# set DOITPROG to echo to test this script - -# Don't use :- since 4.3BSD and earlier shells don't like it. -doit=${DOITPROG-} -if test -z "$doit"; then - doit_exec=exec -else - doit_exec=$doit -fi - -# Put in absolute file names if you don't have them in your path; -# or use environment vars. - -chgrpprog=${CHGRPPROG-chgrp} -chmodprog=${CHMODPROG-chmod} -chownprog=${CHOWNPROG-chown} -cmpprog=${CMPPROG-cmp} -cpprog=${CPPROG-cp} -mkdirprog=${MKDIRPROG-mkdir} -mvprog=${MVPROG-mv} -rmprog=${RMPROG-rm} -stripprog=${STRIPPROG-strip} - -posix_glob='?' -initialize_posix_glob=' - test "$posix_glob" != "?" || { - if (set -f) 2>/dev/null; then - posix_glob= - else - posix_glob=: - fi - } -' - -posix_mkdir= - -# Desired mode of installed file. -mode=0755 - -chgrpcmd= -chmodcmd=$chmodprog -chowncmd= -mvcmd=$mvprog -rmcmd="$rmprog -f" -stripcmd= - -src= -dst= -dir_arg= -dst_arg= - -copy_on_change=false -no_target_directory= - -usage="\ -Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE - or: $0 [OPTION]... SRCFILES... DIRECTORY - or: $0 [OPTION]... -t DIRECTORY SRCFILES... - or: $0 [OPTION]... -d DIRECTORIES... - -In the 1st form, copy SRCFILE to DSTFILE. -In the 2nd and 3rd, copy all SRCFILES to DIRECTORY. -In the 4th, create DIRECTORIES. - -Options: - --help display this help and exit. - --version display version info and exit. - - -c (ignored) - -C install only if different (preserve the last data modification time) - -d create directories instead of installing files. - -g GROUP $chgrpprog installed files to GROUP. - -m MODE $chmodprog installed files to MODE. - -o USER $chownprog installed files to USER. - -s $stripprog installed files. - -t DIRECTORY install into DIRECTORY. - -T report an error if DSTFILE is a directory. - -Environment variables override the default commands: - CHGRPPROG CHMODPROG CHOWNPROG CMPPROG CPPROG MKDIRPROG MVPROG - RMPROG STRIPPROG -" - -while test $# -ne 0; do - case $1 in - -c) ;; - - -C) copy_on_change=true;; - - -d) dir_arg=true;; - - -g) chgrpcmd="$chgrpprog $2" - shift;; - - --help) echo "$usage"; exit $?;; - - -m) mode=$2 - case $mode in - *' '* | *' '* | *' -'* | *'*'* | *'?'* | *'['*) - echo "$0: invalid mode: $mode" >&2 - exit 1;; - esac - shift;; - - -o) chowncmd="$chownprog $2" - shift;; - - -s) stripcmd=$stripprog;; - - -t) dst_arg=$2 - shift;; - - -T) no_target_directory=true;; - - --version) echo "$0 $scriptversion"; exit $?;; - - --) shift - break;; - - -*) echo "$0: invalid option: $1" >&2 - exit 1;; - - *) break;; - esac - shift -done - -if test $# -ne 0 && test -z "$dir_arg$dst_arg"; then - # When -d is used, all remaining arguments are directories to create. - # When -t is used, the destination is already specified. - # Otherwise, the last argument is the destination. Remove it from $@. - for arg - do - if test -n "$dst_arg"; then - # $@ is not empty: it contains at least $arg. - set fnord "$@" "$dst_arg" - shift # fnord - fi - shift # arg - dst_arg=$arg - done -fi - -if test $# -eq 0; then - if test -z "$dir_arg"; then - echo "$0: no input file specified." >&2 - exit 1 - fi - # It's OK to call `install-sh -d' without argument. - # This can happen when creating conditional directories. - exit 0 -fi - -if test -z "$dir_arg"; then - trap '(exit $?); exit' 1 2 13 15 - - # Set umask so as not to create temps with too-generous modes. - # However, 'strip' requires both read and write access to temps. - case $mode in - # Optimize common cases. - *644) cp_umask=133;; - *755) cp_umask=22;; - - *[0-7]) - if test -z "$stripcmd"; then - u_plus_rw= - else - u_plus_rw='% 200' - fi - cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;; - *) - if test -z "$stripcmd"; then - u_plus_rw= - else - u_plus_rw=,u+rw - fi - cp_umask=$mode$u_plus_rw;; - esac -fi - -for src -do - # Protect names starting with `-'. - case $src in - -*) src=./$src;; - esac - - if test -n "$dir_arg"; then - dst=$src - dstdir=$dst - test -d "$dstdir" - dstdir_status=$? - else - - # Waiting for this to be detected by the "$cpprog $src $dsttmp" command - # might cause directories to be created, which would be especially bad - # if $src (and thus $dsttmp) contains '*'. - if test ! -f "$src" && test ! -d "$src"; then - echo "$0: $src does not exist." >&2 - exit 1 - fi - - if test -z "$dst_arg"; then - echo "$0: no destination specified." >&2 - exit 1 - fi - - dst=$dst_arg - # Protect names starting with `-'. - case $dst in - -*) dst=./$dst;; - esac - - # If destination is a directory, append the input filename; won't work - # if double slashes aren't ignored. - if test -d "$dst"; then - if test -n "$no_target_directory"; then - echo "$0: $dst_arg: Is a directory" >&2 - exit 1 - fi - dstdir=$dst - dst=$dstdir/`basename "$src"` - dstdir_status=0 - else - # Prefer dirname, but fall back on a substitute if dirname fails. - dstdir=` - (dirname "$dst") 2>/dev/null || - expr X"$dst" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$dst" : 'X\(//\)[^/]' \| \ - X"$dst" : 'X\(//\)$' \| \ - X"$dst" : 'X\(/\)' \| . 2>/dev/null || - echo X"$dst" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q' - ` - - test -d "$dstdir" - dstdir_status=$? - fi - fi - - obsolete_mkdir_used=false - - if test $dstdir_status != 0; then - case $posix_mkdir in - '') - # Create intermediate dirs using mode 755 as modified by the umask. - # This is like FreeBSD 'install' as of 1997-10-28. - umask=`umask` - case $stripcmd.$umask in - # Optimize common cases. - *[2367][2367]) mkdir_umask=$umask;; - .*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;; - - *[0-7]) - mkdir_umask=`expr $umask + 22 \ - - $umask % 100 % 40 + $umask % 20 \ - - $umask % 10 % 4 + $umask % 2 - `;; - *) mkdir_umask=$umask,go-w;; - esac - - # With -d, create the new directory with the user-specified mode. - # Otherwise, rely on $mkdir_umask. - if test -n "$dir_arg"; then - mkdir_mode=-m$mode - else - mkdir_mode= - fi - - posix_mkdir=false - case $umask in - *[123567][0-7][0-7]) - # POSIX mkdir -p sets u+wx bits regardless of umask, which - # is incompatible with FreeBSD 'install' when (umask & 300) != 0. - ;; - *) - tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$ - trap 'ret=$?; rmdir "$tmpdir/d" "$tmpdir" 2>/dev/null; exit $ret' 0 - - if (umask $mkdir_umask && - exec $mkdirprog $mkdir_mode -p -- "$tmpdir/d") >/dev/null 2>&1 - then - if test -z "$dir_arg" || { - # Check for POSIX incompatibilities with -m. - # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or - # other-writeable bit of parent directory when it shouldn't. - # FreeBSD 6.1 mkdir -m -p sets mode of existing directory. - ls_ld_tmpdir=`ls -ld "$tmpdir"` - case $ls_ld_tmpdir in - d????-?r-*) different_mode=700;; - d????-?--*) different_mode=755;; - *) false;; - esac && - $mkdirprog -m$different_mode -p -- "$tmpdir" && { - ls_ld_tmpdir_1=`ls -ld "$tmpdir"` - test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1" - } - } - then posix_mkdir=: - fi - rmdir "$tmpdir/d" "$tmpdir" - else - # Remove any dirs left behind by ancient mkdir implementations. - rmdir ./$mkdir_mode ./-p ./-- 2>/dev/null - fi - trap '' 0;; - esac;; - esac - - if - $posix_mkdir && ( - umask $mkdir_umask && - $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir" - ) - then : - else - - # The umask is ridiculous, or mkdir does not conform to POSIX, - # or it failed possibly due to a race condition. Create the - # directory the slow way, step by step, checking for races as we go. - - case $dstdir in - /*) prefix='/';; - -*) prefix='./';; - *) prefix='';; - esac - - eval "$initialize_posix_glob" - - oIFS=$IFS - IFS=/ - $posix_glob set -f - set fnord $dstdir - shift - $posix_glob set +f - IFS=$oIFS - - prefixes= - - for d - do - test -z "$d" && continue - - prefix=$prefix$d - if test -d "$prefix"; then - prefixes= - else - if $posix_mkdir; then - (umask=$mkdir_umask && - $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break - # Don't fail if two instances are running concurrently. - test -d "$prefix" || exit 1 - else - case $prefix in - *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;; - *) qprefix=$prefix;; - esac - prefixes="$prefixes '$qprefix'" - fi - fi - prefix=$prefix/ - done - - if test -n "$prefixes"; then - # Don't fail if two instances are running concurrently. - (umask $mkdir_umask && - eval "\$doit_exec \$mkdirprog $prefixes") || - test -d "$dstdir" || exit 1 - obsolete_mkdir_used=true - fi - fi - fi - - if test -n "$dir_arg"; then - { test -z "$chowncmd" || $doit $chowncmd "$dst"; } && - { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } && - { test "$obsolete_mkdir_used$chowncmd$chgrpcmd" = false || - test -z "$chmodcmd" || $doit $chmodcmd $mode "$dst"; } || exit 1 - else - - # Make a couple of temp file names in the proper directory. - dsttmp=$dstdir/_inst.$$_ - rmtmp=$dstdir/_rm.$$_ - - # Trap to clean up those temp files at exit. - trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0 - - # Copy the file name to the temp name. - (umask $cp_umask && $doit_exec $cpprog "$src" "$dsttmp") && - - # and set any options; do chmod last to preserve setuid bits. - # - # If any of these fail, we abort the whole thing. If we want to - # ignore errors from any of these, just make sure not to ignore - # errors from the above "$doit $cpprog $src $dsttmp" command. - # - { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } && - { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } && - { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } && - { test -z "$chmodcmd" || $doit $chmodcmd $mode "$dsttmp"; } && - - # If -C, don't bother to copy if it wouldn't change the file. - if $copy_on_change && - old=`LC_ALL=C ls -dlL "$dst" 2>/dev/null` && - new=`LC_ALL=C ls -dlL "$dsttmp" 2>/dev/null` && - - eval "$initialize_posix_glob" && - $posix_glob set -f && - set X $old && old=:$2:$4:$5:$6 && - set X $new && new=:$2:$4:$5:$6 && - $posix_glob set +f && - - test "$old" = "$new" && - $cmpprog "$dst" "$dsttmp" >/dev/null 2>&1 - then - rm -f "$dsttmp" - else - # Rename the file to the real destination. - $doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null || - - # The rename failed, perhaps because mv can't rename something else - # to itself, or perhaps because mv is so ancient that it does not - # support -f. - { - # Now remove or move aside any old file at destination location. - # We try this two ways since rm can't unlink itself on some - # systems and the destination file might be busy for other - # reasons. In this case, the final cleanup might fail but the new - # file should still install successfully. - { - test ! -f "$dst" || - $doit $rmcmd -f "$dst" 2>/dev/null || - { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null && - { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; } - } || - { echo "$0: cannot unlink or rename $dst" >&2 - (exit 1); exit 1 - } - } && - - # Now rename the file to the real destination. - $doit $mvcmd "$dsttmp" "$dst" - } - fi || exit 1 - - trap '' 0 - fi -done - -# Local variables: -# eval: (add-hook 'write-file-hooks 'time-stamp) -# time-stamp-start: "scriptversion=" -# time-stamp-format: "%:y-%02m-%02d.%02H" -# time-stamp-end: "$" -# End: diff -Nru mobile-broadband-provider-info-20100407/Makefile.in mobile-broadband-provider-info-git.20100622t053426.75f8fc9/Makefile.in --- mobile-broadband-provider-info-20100407/Makefile.in 2010-04-07 15:28:20.000000000 +0100 +++ mobile-broadband-provider-info-git.20100622t053426.75f8fc9/Makefile.in 1970-01-01 01:00:00.000000000 +0100 @@ -1,467 +0,0 @@ -# Makefile.in generated by automake 1.10.1 from Makefile.am. -# @configure_input@ - -# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, -# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. -# This Makefile.in is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY, to the extent permitted by law; without -# even the implied warranty of MERCHANTABILITY or FITNESS FOR A -# PARTICULAR PURPOSE. - -@SET_MAKE@ - -VPATH = @srcdir@ -pkgdatadir = $(datadir)/@PACKAGE@ -pkglibdir = $(libdir)/@PACKAGE@ -pkgincludedir = $(includedir)/@PACKAGE@ -am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd -install_sh_DATA = $(install_sh) -c -m 644 -install_sh_PROGRAM = $(install_sh) -c -install_sh_SCRIPT = $(install_sh) -c -INSTALL_HEADER = $(INSTALL_DATA) -transform = $(program_transform_name) -NORMAL_INSTALL = : -PRE_INSTALL = : -POST_INSTALL = : -NORMAL_UNINSTALL = : -PRE_UNINSTALL = : -POST_UNINSTALL = : -subdir = . -DIST_COMMON = README $(am__configure_deps) $(dist_pkgdata_DATA) \ - $(srcdir)/Makefile.am $(srcdir)/Makefile.in \ - $(srcdir)/mobile-broadband-provider-info.pc.in \ - $(top_srcdir)/configure COPYING ChangeLog NEWS install-sh \ - missing -ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -am__aclocal_m4_deps = $(top_srcdir)/configure.ac -am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ - $(ACLOCAL_M4) -am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ - configure.lineno config.status.lineno -mkinstalldirs = $(install_sh) -d -CONFIG_CLEAN_FILES = mobile-broadband-provider-info.pc -SOURCES = -DIST_SOURCES = -am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; -am__vpath_adj = case $$p in \ - $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ - *) f=$$p;; \ - esac; -am__strip_dir = `echo $$p | sed -e 's|^.*/||'`; -am__installdirs = "$(DESTDIR)$(pkgdatadir)" \ - "$(DESTDIR)$(pkgconfigdir)" -dist_pkgdataDATA_INSTALL = $(INSTALL_DATA) -pkgconfigDATA_INSTALL = $(INSTALL_DATA) -DATA = $(dist_pkgdata_DATA) $(pkgconfig_DATA) -DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) -distdir = $(PACKAGE)-$(VERSION) -top_distdir = $(distdir) -am__remove_distdir = \ - { test ! -d $(distdir) \ - || { find $(distdir) -type d ! -perm -200 -exec chmod u+w {} ';' \ - && rm -fr $(distdir); }; } -GZIP_ENV = --best -DIST_ARCHIVES = $(distdir).tar.bz2 -distuninstallcheck_listfiles = find . -type f -print -distcleancheck_listfiles = find . -type f -print -ACLOCAL = @ACLOCAL@ -AMTAR = @AMTAR@ -AUTOCONF = @AUTOCONF@ -AUTOHEADER = @AUTOHEADER@ -AUTOMAKE = @AUTOMAKE@ -AWK = @AWK@ -CYGPATH_W = @CYGPATH_W@ -DEFS = @DEFS@ -ECHO_C = @ECHO_C@ -ECHO_N = @ECHO_N@ -ECHO_T = @ECHO_T@ -INSTALL = @INSTALL@ -INSTALL_DATA = @INSTALL_DATA@ -INSTALL_PROGRAM = @INSTALL_PROGRAM@ -INSTALL_SCRIPT = @INSTALL_SCRIPT@ -INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ -LIBOBJS = @LIBOBJS@ -LIBS = @LIBS@ -LTLIBOBJS = @LTLIBOBJS@ -MAINT = @MAINT@ -MAKEINFO = @MAKEINFO@ -MKDIR_P = @MKDIR_P@ -PACKAGE = @PACKAGE@ -PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ -PACKAGE_NAME = @PACKAGE_NAME@ -PACKAGE_STRING = @PACKAGE_STRING@ -PACKAGE_TARNAME = @PACKAGE_TARNAME@ -PACKAGE_VERSION = @PACKAGE_VERSION@ -PATH_SEPARATOR = @PATH_SEPARATOR@ -SET_MAKE = @SET_MAKE@ -SHELL = @SHELL@ -STRIP = @STRIP@ -VERSION = @VERSION@ -abs_builddir = @abs_builddir@ -abs_srcdir = @abs_srcdir@ -abs_top_builddir = @abs_top_builddir@ -abs_top_srcdir = @abs_top_srcdir@ -am__leading_dot = @am__leading_dot@ -am__tar = @am__tar@ -am__untar = @am__untar@ -bindir = @bindir@ -build_alias = @build_alias@ -builddir = @builddir@ -datadir = @datadir@ -datarootdir = @datarootdir@ -docdir = @docdir@ -dvidir = @dvidir@ -exec_prefix = @exec_prefix@ -host_alias = @host_alias@ -htmldir = @htmldir@ -includedir = @includedir@ -infodir = @infodir@ -install_sh = @install_sh@ -libdir = @libdir@ -libexecdir = @libexecdir@ -localedir = @localedir@ -localstatedir = @localstatedir@ -mandir = @mandir@ -mkdir_p = @mkdir_p@ -oldincludedir = @oldincludedir@ -pdfdir = @pdfdir@ -prefix = @prefix@ -program_transform_name = @program_transform_name@ -psdir = @psdir@ -sbindir = @sbindir@ -sharedstatedir = @sharedstatedir@ -srcdir = @srcdir@ -sysconfdir = @sysconfdir@ -target_alias = @target_alias@ -top_builddir = @top_builddir@ -top_srcdir = @top_srcdir@ -SP_XML_DB = serviceproviders.xml -dist_pkgdata_DATA = $(SP_XML_DB) serviceproviders.2.dtd -EXTRA_DIST = mobile-broadband-provider-info.pc.in -pkgconfigdir = $(datadir)/pkgconfig -pkgconfig_DATA = mobile-broadband-provider-info.pc -all: all-am - -.SUFFIXES: -am--refresh: - @: -$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps) - @for dep in $?; do \ - case '$(am__configure_deps)' in \ - *$$dep*) \ - echo ' cd $(srcdir) && $(AUTOMAKE) --foreign '; \ - cd $(srcdir) && $(AUTOMAKE) --foreign \ - && exit 0; \ - exit 1;; \ - esac; \ - done; \ - echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \ - cd $(top_srcdir) && \ - $(AUTOMAKE) --foreign Makefile -.PRECIOUS: Makefile -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - @case '$?' in \ - *config.status*) \ - echo ' $(SHELL) ./config.status'; \ - $(SHELL) ./config.status;; \ - *) \ - echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \ - cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \ - esac; - -$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) - $(SHELL) ./config.status --recheck - -$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) - cd $(srcdir) && $(AUTOCONF) -$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) - cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) -mobile-broadband-provider-info.pc: $(top_builddir)/config.status $(srcdir)/mobile-broadband-provider-info.pc.in - cd $(top_builddir) && $(SHELL) ./config.status $@ -install-dist_pkgdataDATA: $(dist_pkgdata_DATA) - @$(NORMAL_INSTALL) - test -z "$(pkgdatadir)" || $(MKDIR_P) "$(DESTDIR)$(pkgdatadir)" - @list='$(dist_pkgdata_DATA)'; for p in $$list; do \ - if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ - f=$(am__strip_dir) \ - echo " $(dist_pkgdataDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(pkgdatadir)/$$f'"; \ - $(dist_pkgdataDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(pkgdatadir)/$$f"; \ - done - -uninstall-dist_pkgdataDATA: - @$(NORMAL_UNINSTALL) - @list='$(dist_pkgdata_DATA)'; for p in $$list; do \ - f=$(am__strip_dir) \ - echo " rm -f '$(DESTDIR)$(pkgdatadir)/$$f'"; \ - rm -f "$(DESTDIR)$(pkgdatadir)/$$f"; \ - done -install-pkgconfigDATA: $(pkgconfig_DATA) - @$(NORMAL_INSTALL) - test -z "$(pkgconfigdir)" || $(MKDIR_P) "$(DESTDIR)$(pkgconfigdir)" - @list='$(pkgconfig_DATA)'; for p in $$list; do \ - if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ - f=$(am__strip_dir) \ - echo " $(pkgconfigDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(pkgconfigdir)/$$f'"; \ - $(pkgconfigDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(pkgconfigdir)/$$f"; \ - done - -uninstall-pkgconfigDATA: - @$(NORMAL_UNINSTALL) - @list='$(pkgconfig_DATA)'; for p in $$list; do \ - f=$(am__strip_dir) \ - echo " rm -f '$(DESTDIR)$(pkgconfigdir)/$$f'"; \ - rm -f "$(DESTDIR)$(pkgconfigdir)/$$f"; \ - done -tags: TAGS -TAGS: - -ctags: CTAGS -CTAGS: - - -distdir: $(DISTFILES) - $(am__remove_distdir) - test -d $(distdir) || mkdir $(distdir) - @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - list='$(DISTFILES)'; \ - dist_files=`for file in $$list; do echo $$file; done | \ - sed -e "s|^$$srcdirstrip/||;t" \ - -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ - case $$dist_files in \ - */*) $(MKDIR_P) `echo "$$dist_files" | \ - sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ - sort -u` ;; \ - esac; \ - for file in $$dist_files; do \ - if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ - if test -d $$d/$$file; then \ - dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ - if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ - cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ - fi; \ - cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ - else \ - test -f $(distdir)/$$file \ - || cp -p $$d/$$file $(distdir)/$$file \ - || exit 1; \ - fi; \ - done - -find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \ - ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \ - ! -type d ! -perm -400 -exec chmod a+r {} \; -o \ - ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \ - || chmod -R a+r $(distdir) -dist-gzip: distdir - tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz - $(am__remove_distdir) -dist-bzip2: distdir - tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2 - $(am__remove_distdir) - -dist-lzma: distdir - tardir=$(distdir) && $(am__tar) | lzma -9 -c >$(distdir).tar.lzma - $(am__remove_distdir) - -dist-tarZ: distdir - tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z - $(am__remove_distdir) - -dist-shar: distdir - shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz - $(am__remove_distdir) - -dist-zip: distdir - -rm -f $(distdir).zip - zip -rq $(distdir).zip $(distdir) - $(am__remove_distdir) - -dist dist-all: distdir - tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2 - $(am__remove_distdir) - -# This target untars the dist file and tries a VPATH configuration. Then -# it guarantees that the distribution is self-contained by making another -# tarfile. -distcheck: dist - case '$(DIST_ARCHIVES)' in \ - *.tar.gz*) \ - GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(am__untar) ;;\ - *.tar.bz2*) \ - bunzip2 -c $(distdir).tar.bz2 | $(am__untar) ;;\ - *.tar.lzma*) \ - unlzma -c $(distdir).tar.lzma | $(am__untar) ;;\ - *.tar.Z*) \ - uncompress -c $(distdir).tar.Z | $(am__untar) ;;\ - *.shar.gz*) \ - GZIP=$(GZIP_ENV) gunzip -c $(distdir).shar.gz | unshar ;;\ - *.zip*) \ - unzip $(distdir).zip ;;\ - esac - chmod -R a-w $(distdir); chmod a+w $(distdir) - mkdir $(distdir)/_build - mkdir $(distdir)/_inst - chmod a-w $(distdir) - dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ - && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \ - && cd $(distdir)/_build \ - && ../configure --srcdir=.. --prefix="$$dc_install_base" \ - $(DISTCHECK_CONFIGURE_FLAGS) \ - && $(MAKE) $(AM_MAKEFLAGS) \ - && $(MAKE) $(AM_MAKEFLAGS) dvi \ - && $(MAKE) $(AM_MAKEFLAGS) check \ - && $(MAKE) $(AM_MAKEFLAGS) install \ - && $(MAKE) $(AM_MAKEFLAGS) installcheck \ - && $(MAKE) $(AM_MAKEFLAGS) uninstall \ - && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \ - distuninstallcheck \ - && chmod -R a-w "$$dc_install_base" \ - && ({ \ - (cd ../.. && umask 077 && mkdir "$$dc_destdir") \ - && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \ - && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \ - && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \ - distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \ - } || { rm -rf "$$dc_destdir"; exit 1; }) \ - && rm -rf "$$dc_destdir" \ - && $(MAKE) $(AM_MAKEFLAGS) dist \ - && rm -rf $(DIST_ARCHIVES) \ - && $(MAKE) $(AM_MAKEFLAGS) distcleancheck - $(am__remove_distdir) - @(echo "$(distdir) archives ready for distribution: "; \ - list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \ - sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x' -distuninstallcheck: - @cd $(distuninstallcheck_dir) \ - && test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \ - || { echo "ERROR: files left after uninstall:" ; \ - if test -n "$(DESTDIR)"; then \ - echo " (check DESTDIR support)"; \ - fi ; \ - $(distuninstallcheck_listfiles) ; \ - exit 1; } >&2 -distcleancheck: distclean - @if test '$(srcdir)' = . ; then \ - echo "ERROR: distcleancheck can only run from a VPATH build" ; \ - exit 1 ; \ - fi - @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \ - || { echo "ERROR: files left in build directory after distclean:" ; \ - $(distcleancheck_listfiles) ; \ - exit 1; } >&2 -check-am: all-am - $(MAKE) $(AM_MAKEFLAGS) check-local -check: check-am -all-am: Makefile $(DATA) -installdirs: - for dir in "$(DESTDIR)$(pkgdatadir)" "$(DESTDIR)$(pkgconfigdir)"; do \ - test -z "$$dir" || $(MKDIR_P) "$$dir"; \ - done -install: install-am -install-exec: install-exec-am -install-data: install-data-am -uninstall: uninstall-am - -install-am: all-am - @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am - -installcheck: installcheck-am -install-strip: - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - `test -z '$(STRIP)' || \ - echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install -mostlyclean-generic: - -clean-generic: - -distclean-generic: - -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) - -maintainer-clean-generic: - @echo "This command is intended for maintainers to use" - @echo "it deletes files that may require special tools to rebuild." -clean: clean-am - -clean-am: clean-generic mostlyclean-am - -distclean: distclean-am - -rm -f $(am__CONFIG_DISTCLEAN_FILES) - -rm -f Makefile -distclean-am: clean-am distclean-generic - -dvi: dvi-am - -dvi-am: - -html: html-am - -info: info-am - -info-am: - -install-data-am: install-dist_pkgdataDATA install-pkgconfigDATA - -install-dvi: install-dvi-am - -install-exec-am: - -install-html: install-html-am - -install-info: install-info-am - -install-man: - -install-pdf: install-pdf-am - -install-ps: install-ps-am - -installcheck-am: - -maintainer-clean: maintainer-clean-am - -rm -f $(am__CONFIG_DISTCLEAN_FILES) - -rm -rf $(top_srcdir)/autom4te.cache - -rm -f Makefile -maintainer-clean-am: distclean-am maintainer-clean-generic - -mostlyclean: mostlyclean-am - -mostlyclean-am: mostlyclean-generic - -pdf: pdf-am - -pdf-am: - -ps: ps-am - -ps-am: - -uninstall-am: uninstall-dist_pkgdataDATA uninstall-pkgconfigDATA - -.MAKE: install-am install-strip - -.PHONY: all all-am am--refresh check check-am check-local clean \ - clean-generic dist dist-all dist-bzip2 dist-gzip dist-lzma \ - dist-shar dist-tarZ dist-zip distcheck distclean \ - distclean-generic distcleancheck distdir distuninstallcheck \ - dvi dvi-am html html-am info info-am install install-am \ - install-data install-data-am install-dist_pkgdataDATA \ - install-dvi install-dvi-am install-exec install-exec-am \ - install-html install-html-am install-info install-info-am \ - install-man install-pdf install-pdf-am install-pkgconfigDATA \ - install-ps install-ps-am install-strip installcheck \ - installcheck-am installdirs maintainer-clean \ - maintainer-clean-generic mostlyclean mostlyclean-generic pdf \ - pdf-am ps ps-am uninstall uninstall-am \ - uninstall-dist_pkgdataDATA uninstall-pkgconfigDATA - - -check-local: - xmllint --valid $(top_srcdir)/$(SP_XML_DB) 2>&1 > /dev/null || exit 1; -# Tell versions [3.59,3.63) of GNU make to not export all variables. -# Otherwise a system limit (for SysV at least) may be exceeded. -.NOEXPORT: diff -Nru mobile-broadband-provider-info-20100407/missing mobile-broadband-provider-info-git.20100622t053426.75f8fc9/missing --- mobile-broadband-provider-info-20100407/missing 2010-04-07 15:28:20.000000000 +0100 +++ mobile-broadband-provider-info-git.20100622t053426.75f8fc9/missing 1970-01-01 01:00:00.000000000 +0100 @@ -1,367 +0,0 @@ -#! /bin/sh -# Common stub for a few missing GNU programs while installing. - -scriptversion=2006-05-10.23 - -# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005, 2006 -# Free Software Foundation, Inc. -# Originally by Fran,cois Pinard , 1996. - -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2, or (at your option) -# any later version. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. - -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA -# 02110-1301, USA. - -# As a special exception to the GNU General Public License, if you -# distribute this file as part of a program that contains a -# configuration script generated by Autoconf, you may include it under -# the same distribution terms that you use for the rest of that program. - -if test $# -eq 0; then - echo 1>&2 "Try \`$0 --help' for more information" - exit 1 -fi - -run=: -sed_output='s/.* --output[ =]\([^ ]*\).*/\1/p' -sed_minuso='s/.* -o \([^ ]*\).*/\1/p' - -# In the cases where this matters, `missing' is being run in the -# srcdir already. -if test -f configure.ac; then - configure_ac=configure.ac -else - configure_ac=configure.in -fi - -msg="missing on your system" - -case $1 in ---run) - # Try to run requested program, and just exit if it succeeds. - run= - shift - "$@" && exit 0 - # Exit code 63 means version mismatch. This often happens - # when the user try to use an ancient version of a tool on - # a file that requires a minimum version. In this case we - # we should proceed has if the program had been absent, or - # if --run hadn't been passed. - if test $? = 63; then - run=: - msg="probably too old" - fi - ;; - - -h|--h|--he|--hel|--help) - echo "\ -$0 [OPTION]... PROGRAM [ARGUMENT]... - -Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an -error status if there is no known handling for PROGRAM. - -Options: - -h, --help display this help and exit - -v, --version output version information and exit - --run try to run the given command, and emulate it if it fails - -Supported PROGRAM values: - aclocal touch file \`aclocal.m4' - autoconf touch file \`configure' - autoheader touch file \`config.h.in' - autom4te touch the output file, or create a stub one - automake touch all \`Makefile.in' files - bison create \`y.tab.[ch]', if possible, from existing .[ch] - flex create \`lex.yy.c', if possible, from existing .c - help2man touch the output file - lex create \`lex.yy.c', if possible, from existing .c - makeinfo touch the output file - tar try tar, gnutar, gtar, then tar without non-portable flags - yacc create \`y.tab.[ch]', if possible, from existing .[ch] - -Send bug reports to ." - exit $? - ;; - - -v|--v|--ve|--ver|--vers|--versi|--versio|--version) - echo "missing $scriptversion (GNU Automake)" - exit $? - ;; - - -*) - echo 1>&2 "$0: Unknown \`$1' option" - echo 1>&2 "Try \`$0 --help' for more information" - exit 1 - ;; - -esac - -# Now exit if we have it, but it failed. Also exit now if we -# don't have it and --version was passed (most likely to detect -# the program). -case $1 in - lex|yacc) - # Not GNU programs, they don't have --version. - ;; - - tar) - if test -n "$run"; then - echo 1>&2 "ERROR: \`tar' requires --run" - exit 1 - elif test "x$2" = "x--version" || test "x$2" = "x--help"; then - exit 1 - fi - ;; - - *) - if test -z "$run" && ($1 --version) > /dev/null 2>&1; then - # We have it, but it failed. - exit 1 - elif test "x$2" = "x--version" || test "x$2" = "x--help"; then - # Could not run --version or --help. This is probably someone - # running `$TOOL --version' or `$TOOL --help' to check whether - # $TOOL exists and not knowing $TOOL uses missing. - exit 1 - fi - ;; -esac - -# If it does not exist, or fails to run (possibly an outdated version), -# try to emulate it. -case $1 in - aclocal*) - echo 1>&2 "\ -WARNING: \`$1' is $msg. You should only need it if - you modified \`acinclude.m4' or \`${configure_ac}'. You might want - to install the \`Automake' and \`Perl' packages. Grab them from - any GNU archive site." - touch aclocal.m4 - ;; - - autoconf) - echo 1>&2 "\ -WARNING: \`$1' is $msg. You should only need it if - you modified \`${configure_ac}'. You might want to install the - \`Autoconf' and \`GNU m4' packages. Grab them from any GNU - archive site." - touch configure - ;; - - autoheader) - echo 1>&2 "\ -WARNING: \`$1' is $msg. You should only need it if - you modified \`acconfig.h' or \`${configure_ac}'. You might want - to install the \`Autoconf' and \`GNU m4' packages. Grab them - from any GNU archive site." - files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' ${configure_ac}` - test -z "$files" && files="config.h" - touch_files= - for f in $files; do - case $f in - *:*) touch_files="$touch_files "`echo "$f" | - sed -e 's/^[^:]*://' -e 's/:.*//'`;; - *) touch_files="$touch_files $f.in";; - esac - done - touch $touch_files - ;; - - automake*) - echo 1>&2 "\ -WARNING: \`$1' is $msg. You should only need it if - you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'. - You might want to install the \`Automake' and \`Perl' packages. - Grab them from any GNU archive site." - find . -type f -name Makefile.am -print | - sed 's/\.am$/.in/' | - while read f; do touch "$f"; done - ;; - - autom4te) - echo 1>&2 "\ -WARNING: \`$1' is needed, but is $msg. - You might have modified some files without having the - proper tools for further handling them. - You can get \`$1' as part of \`Autoconf' from any GNU - archive site." - - file=`echo "$*" | sed -n "$sed_output"` - test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"` - if test -f "$file"; then - touch $file - else - test -z "$file" || exec >$file - echo "#! /bin/sh" - echo "# Created by GNU Automake missing as a replacement of" - echo "# $ $@" - echo "exit 0" - chmod +x $file - exit 1 - fi - ;; - - bison|yacc) - echo 1>&2 "\ -WARNING: \`$1' $msg. You should only need it if - you modified a \`.y' file. You may need the \`Bison' package - in order for those modifications to take effect. You can get - \`Bison' from any GNU archive site." - rm -f y.tab.c y.tab.h - if test $# -ne 1; then - eval LASTARG="\${$#}" - case $LASTARG in - *.y) - SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'` - if test -f "$SRCFILE"; then - cp "$SRCFILE" y.tab.c - fi - SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'` - if test -f "$SRCFILE"; then - cp "$SRCFILE" y.tab.h - fi - ;; - esac - fi - if test ! -f y.tab.h; then - echo >y.tab.h - fi - if test ! -f y.tab.c; then - echo 'main() { return 0; }' >y.tab.c - fi - ;; - - lex|flex) - echo 1>&2 "\ -WARNING: \`$1' is $msg. You should only need it if - you modified a \`.l' file. You may need the \`Flex' package - in order for those modifications to take effect. You can get - \`Flex' from any GNU archive site." - rm -f lex.yy.c - if test $# -ne 1; then - eval LASTARG="\${$#}" - case $LASTARG in - *.l) - SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'` - if test -f "$SRCFILE"; then - cp "$SRCFILE" lex.yy.c - fi - ;; - esac - fi - if test ! -f lex.yy.c; then - echo 'main() { return 0; }' >lex.yy.c - fi - ;; - - help2man) - echo 1>&2 "\ -WARNING: \`$1' is $msg. You should only need it if - you modified a dependency of a manual page. You may need the - \`Help2man' package in order for those modifications to take - effect. You can get \`Help2man' from any GNU archive site." - - file=`echo "$*" | sed -n "$sed_output"` - test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"` - if test -f "$file"; then - touch $file - else - test -z "$file" || exec >$file - echo ".ab help2man is required to generate this page" - exit 1 - fi - ;; - - makeinfo) - echo 1>&2 "\ -WARNING: \`$1' is $msg. You should only need it if - you modified a \`.texi' or \`.texinfo' file, or any other file - indirectly affecting the aspect of the manual. The spurious - call might also be the consequence of using a buggy \`make' (AIX, - DU, IRIX). You might want to install the \`Texinfo' package or - the \`GNU make' package. Grab either from any GNU archive site." - # The file to touch is that specified with -o ... - file=`echo "$*" | sed -n "$sed_output"` - test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"` - if test -z "$file"; then - # ... or it is the one specified with @setfilename ... - infile=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'` - file=`sed -n ' - /^@setfilename/{ - s/.* \([^ ]*\) *$/\1/ - p - q - }' $infile` - # ... or it is derived from the source name (dir/f.texi becomes f.info) - test -z "$file" && file=`echo "$infile" | sed 's,.*/,,;s,.[^.]*$,,'`.info - fi - # If the file does not exist, the user really needs makeinfo; - # let's fail without touching anything. - test -f $file || exit 1 - touch $file - ;; - - tar) - shift - - # We have already tried tar in the generic part. - # Look for gnutar/gtar before invocation to avoid ugly error - # messages. - if (gnutar --version > /dev/null 2>&1); then - gnutar "$@" && exit 0 - fi - if (gtar --version > /dev/null 2>&1); then - gtar "$@" && exit 0 - fi - firstarg="$1" - if shift; then - case $firstarg in - *o*) - firstarg=`echo "$firstarg" | sed s/o//` - tar "$firstarg" "$@" && exit 0 - ;; - esac - case $firstarg in - *h*) - firstarg=`echo "$firstarg" | sed s/h//` - tar "$firstarg" "$@" && exit 0 - ;; - esac - fi - - echo 1>&2 "\ -WARNING: I can't seem to be able to run \`tar' with the given arguments. - You may want to install GNU tar or Free paxutils, or check the - command line arguments." - exit 1 - ;; - - *) - echo 1>&2 "\ -WARNING: \`$1' is needed, and is $msg. - You might have modified some files without having the - proper tools for further handling them. Check the \`README' file, - it often tells you about the needed prerequisites for installing - this package. You may also peek at any GNU archive site, in case - some other package would contain this missing \`$1' program." - exit 1 - ;; -esac - -exit 0 - -# Local variables: -# eval: (add-hook 'write-file-hooks 'time-stamp) -# time-stamp-start: "scriptversion=" -# time-stamp-format: "%:y-%02m-%02d.%02H" -# time-stamp-end: "$" -# End: diff -Nru mobile-broadband-provider-info-20100407/serviceproviders.xml mobile-broadband-provider-info-git.20100622t053426.75f8fc9/serviceproviders.xml --- mobile-broadband-provider-info-20100407/serviceproviders.xml 2010-04-07 15:28:17.000000000 +0100 +++ mobile-broadband-provider-info-git.20100622t053426.75f8fc9/serviceproviders.xml 2010-06-26 00:27:44.000000000 +0100 @@ -86,14 +86,25 @@ Orange - + + + Internet Hima (USB) + + + Mobile Broadband + VivaCell/MTS - + + MTS connect + + + Mobile Broadband + @@ -268,18 +279,18 @@ Mobile Internet (handsets) - 202.139.83.3 - 192.65.91.129 + 211.29.132.12 + 198.142.0.51 Wireless Broadband - 202.139.83.3 - 192.65.91.129 + 211.29.132.12 + 198.142.0.51 Pre-Paid Mobile Broadband - 61.88.88.88 211.29.132.12 + 198.142.0.51 @@ -403,7 +414,7 @@ - AKTel + Robi (AKTel) @@ -442,6 +453,16 @@ + + Citycell + + waps + waps + 117.18.224.146 + 117.18.224.147 + + + @@ -1348,7 +1369,7 @@ - o2 + O2 @@ -1516,6 +1537,17 @@ + + Alice + + + + Option Mobile + 193.189.244.225 + 193.189.244.206 + + + @@ -1595,6 +1627,17 @@ + + + Telmore + + + + 194.239.134.83 + 193.162.153.164 + + + @@ -1855,14 +1898,6 @@ Saunalahti - - - - - Sonera - - - Postpaid (contract) 192.89.123.230 @@ -1873,7 +1908,16 @@ 192.89.123.230 192.89.123.231 - + + + + Sonera + + + + 192.89.123.230 + 192.89.123.231 + Prointernet (public IP) 192.89.123.230 @@ -1986,6 +2030,13 @@ WAP + + Mobile Broadband + slsfr + slsfr + 172.20.2.10 + 172.20.2.39 + Full Internet @@ -2032,7 +2083,7 @@ - o2 + O2 @@ -2062,6 +2113,11 @@ vertigo password + + Mobile Broadband + o2bb + password + WAP o2wap @@ -2556,7 +2612,7 @@ - o2 + O2 @@ -2967,6 +3023,14 @@ internet + + MTS MBlaze + + internet@internet.mtsindia.in + mts + + + @@ -3035,6 +3099,16 @@ + + Síminn + + + + 194.105.224.1 + 212.30.200.200 + + + @@ -3043,8 +3117,11 @@ Vodafone + + Mobile Internet + - Internet Facile + Internet Facile (old) @@ -3088,10 +3165,10 @@ - Ricaricabile + Standard - Abbonamento + Tre.Dati @@ -3893,9 +3970,13 @@ + Mobile Internet 203.92.128.131 203.92.128.132 + + Broadband + @@ -4157,7 +4238,7 @@ Telenor - + 212.17.131.3 148.122.161.2 @@ -4166,6 +4247,7 @@ TDC + 80.232.41.10 80.232.41.20 @@ -4510,6 +4592,12 @@ + + GaduAIR + + + + @@ -4661,10 +4749,15 @@ - DIGI.mobil + Digi.Net Mobil - + + Home + + + Business (static) + @@ -5038,12 +5131,11 @@ 3 - + Mobiltelefon - Bredband @@ -5056,8 +5148,14 @@ Glocalnet - - + + + Mobilt Bredband + + + + Glocalnet Internet + @@ -5077,13 +5175,19 @@ cdma - Tele2 - + + + Mobilt Internet + + + + Mobilt Bredband + @@ -5111,16 +5215,20 @@ Telenor + - Mobilt bredband + Mobilt Internet Mobilsurf med maxtaxa + + Mobilt Bredband + @@ -5136,8 +5244,7 @@ TDC - - + @@ -5148,6 +5255,34 @@ + + Com Hem + + + + + + + + + Parlino + + + + + + Universal Telecom + + + + Mobilt Bredband + + + + Mobilt Internet + + + @@ -5339,6 +5474,17 @@ + + + + Zain + + + + + + + @@ -5659,12 +5805,47 @@ MTN + - 212.88.97.20 - 212.88.97.67 + 193.108.252.50 + 193.108.252.51 + + Orange + + + + + + + UTL + + + + Mobile Broadband + + + Mobile Internet + + + + + Warid + + + + + + + + Zain + + + + + @@ -6378,16 +6559,29 @@ + + ADSL Móvil + 200.40.30.245 + 200.40.220.245 + + GPRS 200.40.30.245 200.40.220.245 - CTI + Claro + + + 3G Internet + ctigprs + ctigprs999 + + 2G Internet ctiweb ctiweb999 @@ -6397,7 +6591,13 @@ Movistar + + 3G Internet + movistar + movistar + + 2G Internet movistar movistar @@ -6446,6 +6646,26 @@ + + Movilnet + + + + 200.44.32.12 + 200.11.248.12 + + + + + Movistar + + + + 200.35.65.3 + 200.35.65.4 + + +