--- yubikey-personalization-1.3.3.orig/debian/libykpers-1-1.install +++ yubikey-personalization-1.3.3/debian/libykpers-1-1.install @@ -0,0 +1 @@ +usr/lib/libykpers-1.so.* --- yubikey-personalization-1.3.3.orig/debian/libykpers-1-dev.install +++ yubikey-personalization-1.3.3/debian/libykpers-1-dev.install @@ -0,0 +1,4 @@ +usr/lib/libykpers-1.so +usr/lib/libykpers-1.a +usr/lib/pkgconfig +usr/include/ykpers-1 --- yubikey-personalization-1.3.3.orig/debian/libykpers-1-1.symbols +++ yubikey-personalization-1.3.3/debian/libykpers-1-1.symbols @@ -0,0 +1,55 @@ +libykpers-1.so.1 libykpers-1-1 #MINVER# + LIBYKPERS_1.0@LIBYKPERS_1.0 0.97 + _yk_errno_location@LIBYKPERS_1.0 0.97 + _ykp_errno_location@LIBYKPERS_1.0 0.97 + yk_close_key@LIBYKPERS_1.0 0.97 + yk_endian_swap_16@LIBYKPERS_1.0 0.97 + yk_force_key_update@LIBYKPERS_1.0 0.97 + yk_get_status@LIBYKPERS_1.0 0.97 + yk_init@LIBYKPERS_1.0 0.97 + yk_open_first_key@LIBYKPERS_1.0 0.97 + yk_pbkdf2@LIBYKPERS_1.0 0.97 + yk_read_from_key@LIBYKPERS_1.0 0.97 + yk_release@LIBYKPERS_1.0 0.97 + yk_strerror@LIBYKPERS_1.0 0.97 + yk_usb_strerror@LIBYKPERS_1.0 0.97 + yk_write_config@LIBYKPERS_1.0 0.97 + yk_write_to_key@LIBYKPERS_1.0 0.97 + ykds_alloc@LIBYKPERS_1.0 0.97 + ykds_free@LIBYKPERS_1.0 0.97 + ykds_pgm_seq@LIBYKPERS_1.0 0.97 + ykds_static@LIBYKPERS_1.0 0.97 + ykds_touch_level@LIBYKPERS_1.0 0.97 + ykds_version_build@LIBYKPERS_1.0 0.97 + ykds_version_major@LIBYKPERS_1.0 0.97 + ykds_version_minor@LIBYKPERS_1.0 0.97 + ykp_AES_key_from_hex@LIBYKPERS_1.0 0.97 + ykp_AES_key_from_passphrase@LIBYKPERS_1.0 0.97 + ykp_config_num@LIBYKPERS_1.0 0.97 + ykp_configure_for@LIBYKPERS_1.0 0.97 + ykp_core_config@LIBYKPERS_1.0 0.97 + ykp_create_config@LIBYKPERS_1.0 0.97 + ykp_free_config@LIBYKPERS_1.0 0.97 + ykp_read_config@LIBYKPERS_1.0 0.97 + ykp_set_access_code@LIBYKPERS_1.0 0.97 + ykp_set_cfgflag_ALLOW_HIDTRIG@LIBYKPERS_1.0 0.97 + ykp_set_cfgflag_MAN_UPDATE@LIBYKPERS_1.0 0.97 + ykp_set_cfgflag_PACING_10MS@LIBYKPERS_1.0 0.97 + ykp_set_cfgflag_PACING_20MS@LIBYKPERS_1.0 0.97 + ykp_set_cfgflag_SEND_REF@LIBYKPERS_1.0 0.97 + ykp_set_cfgflag_SHORT_TICKET@LIBYKPERS_1.0 0.97 + ykp_set_cfgflag_STATIC_TICKET@LIBYKPERS_1.0 0.97 + ykp_set_cfgflag_STRONG_PW1@LIBYKPERS_1.0 0.97 + ykp_set_cfgflag_STRONG_PW2@LIBYKPERS_1.0 0.97 + ykp_set_cfgflag_TICKET_FIRST@LIBYKPERS_1.0 0.97 + ykp_set_fixed@LIBYKPERS_1.0 0.97 + ykp_set_tktflag_APPEND_CR@LIBYKPERS_1.0 0.97 + ykp_set_tktflag_APPEND_DELAY1@LIBYKPERS_1.0 0.97 + ykp_set_tktflag_APPEND_DELAY2@LIBYKPERS_1.0 0.97 + ykp_set_tktflag_APPEND_TAB1@LIBYKPERS_1.0 0.97 + ykp_set_tktflag_APPEND_TAB2@LIBYKPERS_1.0 0.97 + ykp_set_tktflag_PROTECT_CFG2@LIBYKPERS_1.0 0.97 + ykp_set_tktflag_TAB_FIRST@LIBYKPERS_1.0 0.97 + ykp_set_uid@LIBYKPERS_1.0 0.97 + ykp_strerror@LIBYKPERS_1.0 0.97 + ykp_write_config@LIBYKPERS_1.0 0.97 --- yubikey-personalization-1.3.3.orig/debian/yubikey-personalization.install +++ yubikey-personalization-1.3.3/debian/yubikey-personalization.install @@ -0,0 +1,2 @@ +usr/bin/ykpersonalize +usr/share/man/man1/ykpersonalize* --- yubikey-personalization-1.3.3.orig/debian/docs +++ yubikey-personalization-1.3.3/debian/docs @@ -0,0 +1,5 @@ +NEWS +README +doc/UsbhidIssue.wiki +doc/MakeRelease.wiki +doc/ReadMe.wiki --- yubikey-personalization-1.3.3.orig/debian/copyright +++ yubikey-personalization-1.3.3/debian/copyright @@ -0,0 +1,47 @@ +This package was debianized by Tollef Fog Heen on +Tue, 07 Apr 2009 16:46:56 +0200. + +It was downloaded from http://code.google.com/p/yubikey-personalization/ + +Upstream Authors: + + Richard Levitte + Simon Josefsson + Jakob Ehrensvärd + Lester Hightower, 10East" + Christer Kaivo-oja + Tollef Fog Heen + +Copyrights: + Copyright (c) 2008, Yubico AB + Copyright (c) 2009, Tollef Fog Heen + Copyright (c) 2003, 2004 Richard Levitte . + Copyright (c) 2009, Christer Kaivo-oja + +Licence: + +All rights reserved. + +Redistribution and use in source and binary forms, with or without +modification, are permitted provided that the following conditions are +met: + + * Redistributions of source code must retain the above copyright + notice, this list of conditions and the following disclaimer. + + * Redistributions in binary form must reproduce the above + copyright notice, this list of conditions and the following + disclaimer in the documentation and/or other materials provided + with the distribution. + +THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +"AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT +OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY +THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. --- yubikey-personalization-1.3.3.orig/debian/control +++ yubikey-personalization-1.3.3/debian/control @@ -0,0 +1,41 @@ +Source: yubikey-personalization +Section: utils +Priority: extra +Maintainer: Tollef Fog Heen +Build-Depends: debhelper (>= 7), autotools-dev, libusb-1.0-0-dev, libyubikey-dev(>= 1.5), chrpath, pkg-config +Standards-Version: 3.8.2 +Homepage: http://code.google.com/p/yubikey-personalization/ + +Package: yubikey-personalization +Architecture: any +Depends: ${shlibs:Depends}, ${misc:Depends} +Description: Personalization tool for Yubikey OTP tokens + Yubikeys are USB tokens that act like keyboards and generate one-time + or static passwords. + . + This is a tool to customize the tokens with your own cryptographic + key, user id and so on. +Homepage: http://code.google.com/p/yubikey-personalization/ + +Package: libykpers-1-1 +Architecture: any +Section: libs +Depends: ${shlibs:Depends}, ${misc:Depends} +Description: Personalization tool for Yubikey OTP tokens + Yubikeys are USB tokens that act like keyboards and generate one-time + or static passwords. + . + This package contains the run-time shared library needed for the + personalization tool. +Homepage: http://code.google.com/p/yubikey-personalization/ + +Package: libykpers-1-dev +Architecture: any +Section: libdevel +Depends: ${shlibs:Depends}, ${misc:Depends} +Description: Personalization tool for Yubikey OTP tokens + Yubikeys are USB tokens that act like keyboards and generate one-time + or static passwords. + . + This package contains the development files for the library. +Homepage: http://code.google.com/p/yubikey-personalization/ \ No newline at end of file --- yubikey-personalization-1.3.3.orig/debian/compat +++ yubikey-personalization-1.3.3/debian/compat @@ -0,0 +1 @@ +7 --- yubikey-personalization-1.3.3.orig/debian/rules +++ yubikey-personalization-1.3.3/debian/rules @@ -0,0 +1,86 @@ +#! /usr/bin/make -f +# -*- makefile -*- +# Sample debian/rules that uses debhelper. +# This file was originally written by Joey Hess and Craig Small. +# As a special exception, when this file is copied by dh-make into a +# dh-make output file, you may use that output file without restriction. +# This special exception was added by Craig Small in version 0.37 of dh-make. + +# Uncomment this to turn on verbose mode. +#export DH_VERBOSE=1 + +# These are used for cross-compiling and for saving the configure script +# from having to guess our platform (since we know it already) +DEB_HOST_GNU_TYPE ?= $(shell dpkg-architecture -qDEB_HOST_GNU_TYPE) +DEB_BUILD_GNU_TYPE ?= $(shell dpkg-architecture -qDEB_BUILD_GNU_TYPE) +ifneq ($(DEB_HOST_GNU_TYPE),$(DEB_BUILD_GNU_TYPE)) +CROSS= --build $(DEB_BUILD_GNU_TYPE) --host $(DEB_HOST_GNU_TYPE) +else +CROSS= --build $(DEB_BUILD_GNU_TYPE) +endif + +config.status: configure + dh_testdir + # Add here commands to configure the package. +ifneq "$(wildcard /usr/share/misc/config.sub)" "" + cp -f /usr/share/misc/config.sub config.sub +endif +ifneq "$(wildcard /usr/share/misc/config.guess)" "" + cp -f /usr/share/misc/config.guess config.guess +endif + mkdir -p build-$(DEB_BUILD_GNU_TYPE) + cd build-$(DEB_BUILD_GNU_TYPE) && ../configure $(CROSS) --prefix=/usr --mandir=\$${prefix}/share/man --infodir=\$${prefix}/share/info CFLAGS="$(CFLAGS)" LDFLAGS="-Wl,-z,defs" || sleep 6000 + +build: build-stamp +build-stamp: config.status + dh_testdir + $(MAKE) -C build-$(DEB_BUILD_GNU_TYPE) + touch $@ + +clean: + dh_testdir + dh_testroot + rm -f build-stamp + + # Add here commands to clean up after the build process. + [ ! -f Makefile ] || $(MAKE) distclean + rm -rf build-$(DEB_BUILD_GNU_TYPE) + rm -f config.sub config.guess + + dh_clean + +install: build + dh_testdir + dh_testroot + dh_prep + dh_installdirs + $(MAKE) -C build-$(DEB_BUILD_GNU_TYPE) DESTDIR=$(CURDIR)/debian/tmp install + chrpath -d $(CURDIR)/debian/tmp/usr/bin/ykpersonalize + +# Build architecture-independent files here. +binary-indep: install +# We have nothing to do by default. + +# Build architecture-dependent files here. +binary-arch: install + dh_testdir + dh_testroot + dh_installchangelogs + dh_installdocs + dh_installexamples + rm -rf debian/tmp/usr/lib/*.la + dh_install --sourcedir=debian/tmp --fail-missing + dh_installman + dh_link + dh_strip + dh_compress + dh_fixperms + dh_makeshlibs -V + dh_installdeb + dh_shlibdeps + dh_gencontrol + dh_md5sums + dh_builddeb + +binary: binary-indep binary-arch +.PHONY: build clean binary-indep binary-arch binary install --- yubikey-personalization-1.3.3.orig/debian/dirs +++ yubikey-personalization-1.3.3/debian/dirs @@ -0,0 +1,2 @@ +usr/bin + --- yubikey-personalization-1.3.3.orig/debian/gitpkg-hook.sh +++ yubikey-personalization-1.3.3/debian/gitpkg-hook.sh @@ -0,0 +1,9 @@ +#! /bin/sh +# This file is used by gitpkg to extract a byte identical .orig.tar.gz +# file using pristine-tar. To use it you need pristine-tar, and to +# configure HOOK_FILE=debian/gitpkg-hook.sh in one of the places that +# gitpkg looks (currently _not_ the environment). + +ORIGTGZ="${DEB_DIR}/${DEB_SOURCE}/${DEB_SOURCE}_${DEB_VERSION%-*}.orig.tar.gz" +echo "(cd $REPO_ROOT && pristine-tar checkout ${ORIGTGZ})" +(cd $REPO_ROOT && pristine-tar checkout ${ORIGTGZ}) --- yubikey-personalization-1.3.3.orig/debian/changelog +++ yubikey-personalization-1.3.3/debian/changelog @@ -0,0 +1,50 @@ +yubikey-personalization (1.3.3-1ubuntu1) karmic; urgency=low + + * Upgraded to new version and backport to karmic + + -- Troels Liebe Bentsen Sat, 29 May 2010 14:37:33 +0200 + +yubikey-personalization (1.1-1) unstable; urgency=low + + * New upstream release, minor fixes. + * Add some more docs to the installed package. Closes: #548238 + + -- Tollef Fog Heen Sat, 03 Oct 2009 21:45:59 +0200 + +yubikey-personalization (1.0-1) unstable; urgency=low + + * New upstream version + + -- Tollef Fog Heen Fri, 18 Sep 2009 09:16:02 +0200 + +yubikey-personalization (0.99-1) unstable; urgency=low + + * New upstream release + - Exit with non-0 return code when yubikey is not present. + - ykpersonalize.1: Keep in sync with tool. + + -- Tollef Fog Heen Sun, 13 Sep 2009 09:14:55 +0200 + +yubikey-personalization (0.97-1) unstable; urgency=low + + * New upstream version + - Limit the amount of symbols exported. + - Make -h work when there's no yubikey plugged in too + - Add link to reference manual for explanation of options + * Bump build-depends for libyubikey-dev to 1.5 or higher. + * Add some missing copyrights to debian/copyright, thanks to Chris Lamb + for noticing. + + -- Tollef Fog Heen Sat, 05 Sep 2009 11:43:54 +0200 + +yubikey-personalization (0.96-1) unstable; urgency=low + + * New upstream release + + -- Tollef Fog Heen Sat, 29 Aug 2009 11:20:27 +0200 + +yubikey-personalization (0.95-1) unstable; urgency=low + + * Initial release + + -- Tollef Fog Heen Fri, 21 Aug 2009 18:39:57 +0200