diff -Nru libshairport-1.2.0.20310.1/aclocal.m4 libshairport-1.2.1~git20120110.aeb4987/aclocal.m4 --- libshairport-1.2.0.20310.1/aclocal.m4 2011-11-10 19:35:54.000000000 +0000 +++ libshairport-1.2.1~git20120110.aeb4987/aclocal.m4 2012-01-11 04:34:40.000000000 +0000 @@ -19,8453 +19,6 @@ If you have problems, you may need to regenerate the build system entirely. To do so, use the procedure documented by the package, typically `autoreconf'.])]) -# libtool.m4 - Configure libtool for the host system. -*-Autoconf-*- -# -# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, -# 2006, 2007, 2008, 2009, 2010 Free Software Foundation, -# Inc. -# Written by Gordon Matzigkeit, 1996 -# -# This file is free software; the Free Software Foundation gives -# unlimited permission to copy and/or distribute it, with or without -# modifications, as long as this notice is preserved. - -m4_define([_LT_COPYING], [dnl -# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, -# 2006, 2007, 2008, 2009, 2010 Free Software Foundation, -# Inc. -# Written by Gordon Matzigkeit, 1996 -# -# This file is part of GNU Libtool. -# -# GNU Libtool is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# As a special exception to the GNU General Public License, -# if you distribute this file as part of a program or library that -# is built using GNU Libtool, you may include this file under the -# same distribution terms that you use for the rest of that program. -# -# GNU Libtool is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with GNU Libtool; see the file COPYING. If not, a copy -# can be downloaded from http://www.gnu.org/licenses/gpl.html, or -# obtained by writing to the Free Software Foundation, Inc., -# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. -]) - -# serial 57 LT_INIT - - -# LT_PREREQ(VERSION) -# ------------------ -# Complain and exit if this libtool version is less that VERSION. -m4_defun([LT_PREREQ], -[m4_if(m4_version_compare(m4_defn([LT_PACKAGE_VERSION]), [$1]), -1, - [m4_default([$3], - [m4_fatal([Libtool version $1 or higher is required], - 63)])], - [$2])]) - - -# _LT_CHECK_BUILDDIR -# ------------------ -# Complain if the absolute build directory name contains unusual characters -m4_defun([_LT_CHECK_BUILDDIR], -[case `pwd` in - *\ * | *\ *) - AC_MSG_WARN([Libtool does not cope well with whitespace in `pwd`]) ;; -esac -]) - - -# LT_INIT([OPTIONS]) -# ------------------ -AC_DEFUN([LT_INIT], -[AC_PREREQ([2.58])dnl We use AC_INCLUDES_DEFAULT -AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT])dnl -AC_BEFORE([$0], [LT_LANG])dnl -AC_BEFORE([$0], [LT_OUTPUT])dnl -AC_BEFORE([$0], [LTDL_INIT])dnl -m4_require([_LT_CHECK_BUILDDIR])dnl - -dnl Autoconf doesn't catch unexpanded LT_ macros by default: -m4_pattern_forbid([^_?LT_[A-Z_]+$])dnl -m4_pattern_allow([^(_LT_EOF|LT_DLGLOBAL|LT_DLLAZY_OR_NOW|LT_MULTI_MODULE)$])dnl -dnl aclocal doesn't pull ltoptions.m4, ltsugar.m4, or ltversion.m4 -dnl unless we require an AC_DEFUNed macro: -AC_REQUIRE([LTOPTIONS_VERSION])dnl -AC_REQUIRE([LTSUGAR_VERSION])dnl -AC_REQUIRE([LTVERSION_VERSION])dnl -AC_REQUIRE([LTOBSOLETE_VERSION])dnl -m4_require([_LT_PROG_LTMAIN])dnl - -_LT_SHELL_INIT([SHELL=${CONFIG_SHELL-/bin/sh}]) - -dnl Parse OPTIONS -_LT_SET_OPTIONS([$0], [$1]) - -# This can be used to rebuild libtool when needed -LIBTOOL_DEPS="$ltmain" - -# Always use our own libtool. -LIBTOOL='$(SHELL) $(top_builddir)/libtool' -AC_SUBST(LIBTOOL)dnl - -_LT_SETUP - -# Only expand once: -m4_define([LT_INIT]) -])# LT_INIT - -# Old names: -AU_ALIAS([AC_PROG_LIBTOOL], [LT_INIT]) -AU_ALIAS([AM_PROG_LIBTOOL], [LT_INIT]) -dnl aclocal-1.4 backwards compatibility: -dnl AC_DEFUN([AC_PROG_LIBTOOL], []) -dnl AC_DEFUN([AM_PROG_LIBTOOL], []) - - -# _LT_CC_BASENAME(CC) -# ------------------- -# Calculate cc_basename. Skip known compiler wrappers and cross-prefix. -m4_defun([_LT_CC_BASENAME], -[for cc_temp in $1""; do - case $cc_temp in - compile | *[[\\/]]compile | ccache | *[[\\/]]ccache ) ;; - distcc | *[[\\/]]distcc | purify | *[[\\/]]purify ) ;; - \-*) ;; - *) break;; - esac -done -cc_basename=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"` -]) - - -# _LT_FILEUTILS_DEFAULTS -# ---------------------- -# It is okay to use these file commands and assume they have been set -# sensibly after `m4_require([_LT_FILEUTILS_DEFAULTS])'. -m4_defun([_LT_FILEUTILS_DEFAULTS], -[: ${CP="cp -f"} -: ${MV="mv -f"} -: ${RM="rm -f"} -])# _LT_FILEUTILS_DEFAULTS - - -# _LT_SETUP -# --------- -m4_defun([_LT_SETUP], -[AC_REQUIRE([AC_CANONICAL_HOST])dnl -AC_REQUIRE([AC_CANONICAL_BUILD])dnl -AC_REQUIRE([_LT_PREPARE_SED_QUOTE_VARS])dnl -AC_REQUIRE([_LT_PROG_ECHO_BACKSLASH])dnl - -_LT_DECL([], [host_alias], [0], [The host system])dnl -_LT_DECL([], [host], [0])dnl -_LT_DECL([], [host_os], [0])dnl -dnl -_LT_DECL([], [build_alias], [0], [The build system])dnl -_LT_DECL([], [build], [0])dnl -_LT_DECL([], [build_os], [0])dnl -dnl -AC_REQUIRE([AC_PROG_CC])dnl -AC_REQUIRE([LT_PATH_LD])dnl -AC_REQUIRE([LT_PATH_NM])dnl -dnl -AC_REQUIRE([AC_PROG_LN_S])dnl -test -z "$LN_S" && LN_S="ln -s" -_LT_DECL([], [LN_S], [1], [Whether we need soft or hard links])dnl -dnl -AC_REQUIRE([LT_CMD_MAX_LEN])dnl -_LT_DECL([objext], [ac_objext], [0], [Object file suffix (normally "o")])dnl -_LT_DECL([], [exeext], [0], [Executable file suffix (normally "")])dnl -dnl -m4_require([_LT_FILEUTILS_DEFAULTS])dnl -m4_require([_LT_CHECK_SHELL_FEATURES])dnl -m4_require([_LT_PATH_CONVERSION_FUNCTIONS])dnl -m4_require([_LT_CMD_RELOAD])dnl -m4_require([_LT_CHECK_MAGIC_METHOD])dnl -m4_require([_LT_CHECK_SHAREDLIB_FROM_LINKLIB])dnl -m4_require([_LT_CMD_OLD_ARCHIVE])dnl -m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl -m4_require([_LT_WITH_SYSROOT])dnl - -_LT_CONFIG_LIBTOOL_INIT([ -# See if we are running on zsh, and set the options which allow our -# commands through without removal of \ escapes INIT. -if test -n "\${ZSH_VERSION+set}" ; then - setopt NO_GLOB_SUBST -fi -]) -if test -n "${ZSH_VERSION+set}" ; then - setopt NO_GLOB_SUBST -fi - -_LT_CHECK_OBJDIR - -m4_require([_LT_TAG_COMPILER])dnl - -case $host_os in -aix3*) - # AIX sometimes has problems with the GCC collect2 program. For some - # reason, if we set the COLLECT_NAMES environment variable, the problems - # vanish in a puff of smoke. - if test "X${COLLECT_NAMES+set}" != Xset; then - COLLECT_NAMES= - export COLLECT_NAMES - fi - ;; -esac - -# Global variables: -ofile=libtool -can_build_shared=yes - -# All known linkers require a `.a' archive for static linking (except MSVC, -# which needs '.lib'). -libext=a - -with_gnu_ld="$lt_cv_prog_gnu_ld" - -old_CC="$CC" -old_CFLAGS="$CFLAGS" - -# Set sane defaults for various variables -test -z "$CC" && CC=cc -test -z "$LTCC" && LTCC=$CC -test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS -test -z "$LD" && LD=ld -test -z "$ac_objext" && ac_objext=o - -_LT_CC_BASENAME([$compiler]) - -# Only perform the check for file, if the check method requires it -test -z "$MAGIC_CMD" && MAGIC_CMD=file -case $deplibs_check_method in -file_magic*) - if test "$file_magic_cmd" = '$MAGIC_CMD'; then - _LT_PATH_MAGIC - fi - ;; -esac - -# Use C for the default configuration in the libtool script -LT_SUPPORTED_TAG([CC]) -_LT_LANG_C_CONFIG -_LT_LANG_DEFAULT_CONFIG -_LT_CONFIG_COMMANDS -])# _LT_SETUP - - -# _LT_PREPARE_SED_QUOTE_VARS -# -------------------------- -# Define a few sed substitution that help us do robust quoting. -m4_defun([_LT_PREPARE_SED_QUOTE_VARS], -[# Backslashify metacharacters that are still active within -# double-quoted strings. -sed_quote_subst='s/\([["`$\\]]\)/\\\1/g' - -# Same as above, but do not quote variable references. -double_quote_subst='s/\([["`\\]]\)/\\\1/g' - -# Sed substitution to delay expansion of an escaped shell variable in a -# double_quote_subst'ed string. -delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g' - -# Sed substitution to delay expansion of an escaped single quote. -delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g' - -# Sed substitution to avoid accidental globbing in evaled expressions -no_glob_subst='s/\*/\\\*/g' -]) - -# _LT_PROG_LTMAIN -# --------------- -# Note that this code is called both from `configure', and `config.status' -# now that we use AC_CONFIG_COMMANDS to generate libtool. Notably, -# `config.status' has no value for ac_aux_dir unless we are using Automake, -# so we pass a copy along to make sure it has a sensible value anyway. -m4_defun([_LT_PROG_LTMAIN], -[m4_ifdef([AC_REQUIRE_AUX_FILE], [AC_REQUIRE_AUX_FILE([ltmain.sh])])dnl -_LT_CONFIG_LIBTOOL_INIT([ac_aux_dir='$ac_aux_dir']) -ltmain="$ac_aux_dir/ltmain.sh" -])# _LT_PROG_LTMAIN - - - -# So that we can recreate a full libtool script including additional -# tags, we accumulate the chunks of code to send to AC_CONFIG_COMMANDS -# in macros and then make a single call at the end using the `libtool' -# label. - - -# _LT_CONFIG_LIBTOOL_INIT([INIT-COMMANDS]) -# ---------------------------------------- -# Register INIT-COMMANDS to be passed to AC_CONFIG_COMMANDS later. -m4_define([_LT_CONFIG_LIBTOOL_INIT], -[m4_ifval([$1], - [m4_append([_LT_OUTPUT_LIBTOOL_INIT], - [$1 -])])]) - -# Initialize. -m4_define([_LT_OUTPUT_LIBTOOL_INIT]) - - -# _LT_CONFIG_LIBTOOL([COMMANDS]) -# ------------------------------ -# Register COMMANDS to be passed to AC_CONFIG_COMMANDS later. -m4_define([_LT_CONFIG_LIBTOOL], -[m4_ifval([$1], - [m4_append([_LT_OUTPUT_LIBTOOL_COMMANDS], - [$1 -])])]) - -# Initialize. -m4_define([_LT_OUTPUT_LIBTOOL_COMMANDS]) - - -# _LT_CONFIG_SAVE_COMMANDS([COMMANDS], [INIT_COMMANDS]) -# ----------------------------------------------------- -m4_defun([_LT_CONFIG_SAVE_COMMANDS], -[_LT_CONFIG_LIBTOOL([$1]) -_LT_CONFIG_LIBTOOL_INIT([$2]) -]) - - -# _LT_FORMAT_COMMENT([COMMENT]) -# ----------------------------- -# Add leading comment marks to the start of each line, and a trailing -# full-stop to the whole comment if one is not present already. -m4_define([_LT_FORMAT_COMMENT], -[m4_ifval([$1], [ -m4_bpatsubst([m4_bpatsubst([$1], [^ *], [# ])], - [['`$\]], [\\\&])]m4_bmatch([$1], [[!?.]$], [], [.]) -)]) - - - - - -# _LT_DECL([CONFIGNAME], VARNAME, VALUE, [DESCRIPTION], [IS-TAGGED?]) -# ------------------------------------------------------------------- -# CONFIGNAME is the name given to the value in the libtool script. -# VARNAME is the (base) name used in the configure script. -# VALUE may be 0, 1 or 2 for a computed quote escaped value based on -# VARNAME. Any other value will be used directly. -m4_define([_LT_DECL], -[lt_if_append_uniq([lt_decl_varnames], [$2], [, ], - [lt_dict_add_subkey([lt_decl_dict], [$2], [libtool_name], - [m4_ifval([$1], [$1], [$2])]) - lt_dict_add_subkey([lt_decl_dict], [$2], [value], [$3]) - m4_ifval([$4], - [lt_dict_add_subkey([lt_decl_dict], [$2], [description], [$4])]) - lt_dict_add_subkey([lt_decl_dict], [$2], - [tagged?], [m4_ifval([$5], [yes], [no])])]) -]) - - -# _LT_TAGDECL([CONFIGNAME], VARNAME, VALUE, [DESCRIPTION]) -# -------------------------------------------------------- -m4_define([_LT_TAGDECL], [_LT_DECL([$1], [$2], [$3], [$4], [yes])]) - - -# lt_decl_tag_varnames([SEPARATOR], [VARNAME1...]) -# ------------------------------------------------ -m4_define([lt_decl_tag_varnames], -[_lt_decl_filter([tagged?], [yes], $@)]) - - -# _lt_decl_filter(SUBKEY, VALUE, [SEPARATOR], [VARNAME1..]) -# --------------------------------------------------------- -m4_define([_lt_decl_filter], -[m4_case([$#], - [0], [m4_fatal([$0: too few arguments: $#])], - [1], [m4_fatal([$0: too few arguments: $#: $1])], - [2], [lt_dict_filter([lt_decl_dict], [$1], [$2], [], lt_decl_varnames)], - [3], [lt_dict_filter([lt_decl_dict], [$1], [$2], [$3], lt_decl_varnames)], - [lt_dict_filter([lt_decl_dict], $@)])[]dnl -]) - - -# lt_decl_quote_varnames([SEPARATOR], [VARNAME1...]) -# -------------------------------------------------- -m4_define([lt_decl_quote_varnames], -[_lt_decl_filter([value], [1], $@)]) - - -# lt_decl_dquote_varnames([SEPARATOR], [VARNAME1...]) -# --------------------------------------------------- -m4_define([lt_decl_dquote_varnames], -[_lt_decl_filter([value], [2], $@)]) - - -# lt_decl_varnames_tagged([SEPARATOR], [VARNAME1...]) -# --------------------------------------------------- -m4_define([lt_decl_varnames_tagged], -[m4_assert([$# <= 2])dnl -_$0(m4_quote(m4_default([$1], [[, ]])), - m4_ifval([$2], [[$2]], [m4_dquote(lt_decl_tag_varnames)]), - m4_split(m4_normalize(m4_quote(_LT_TAGS)), [ ]))]) -m4_define([_lt_decl_varnames_tagged], -[m4_ifval([$3], [lt_combine([$1], [$2], [_], $3)])]) - - -# lt_decl_all_varnames([SEPARATOR], [VARNAME1...]) -# ------------------------------------------------ -m4_define([lt_decl_all_varnames], -[_$0(m4_quote(m4_default([$1], [[, ]])), - m4_if([$2], [], - m4_quote(lt_decl_varnames), - m4_quote(m4_shift($@))))[]dnl -]) -m4_define([_lt_decl_all_varnames], -[lt_join($@, lt_decl_varnames_tagged([$1], - lt_decl_tag_varnames([[, ]], m4_shift($@))))dnl -]) - - -# _LT_CONFIG_STATUS_DECLARE([VARNAME]) -# ------------------------------------ -# Quote a variable value, and forward it to `config.status' so that its -# declaration there will have the same value as in `configure'. VARNAME -# must have a single quote delimited value for this to work. -m4_define([_LT_CONFIG_STATUS_DECLARE], -[$1='`$ECHO "$][$1" | $SED "$delay_single_quote_subst"`']) - - -# _LT_CONFIG_STATUS_DECLARATIONS -# ------------------------------ -# We delimit libtool config variables with single quotes, so when -# we write them to config.status, we have to be sure to quote all -# embedded single quotes properly. In configure, this macro expands -# each variable declared with _LT_DECL (and _LT_TAGDECL) into: -# -# ='`$ECHO "$" | $SED "$delay_single_quote_subst"`' -m4_defun([_LT_CONFIG_STATUS_DECLARATIONS], -[m4_foreach([_lt_var], m4_quote(lt_decl_all_varnames), - [m4_n([_LT_CONFIG_STATUS_DECLARE(_lt_var)])])]) - - -# _LT_LIBTOOL_TAGS -# ---------------- -# Output comment and list of tags supported by the script -m4_defun([_LT_LIBTOOL_TAGS], -[_LT_FORMAT_COMMENT([The names of the tagged configurations supported by this script])dnl -available_tags="_LT_TAGS"dnl -]) - - -# _LT_LIBTOOL_DECLARE(VARNAME, [TAG]) -# ----------------------------------- -# Extract the dictionary values for VARNAME (optionally with TAG) and -# expand to a commented shell variable setting: -# -# # Some comment about what VAR is for. -# visible_name=$lt_internal_name -m4_define([_LT_LIBTOOL_DECLARE], -[_LT_FORMAT_COMMENT(m4_quote(lt_dict_fetch([lt_decl_dict], [$1], - [description])))[]dnl -m4_pushdef([_libtool_name], - m4_quote(lt_dict_fetch([lt_decl_dict], [$1], [libtool_name])))[]dnl -m4_case(m4_quote(lt_dict_fetch([lt_decl_dict], [$1], [value])), - [0], [_libtool_name=[$]$1], - [1], [_libtool_name=$lt_[]$1], - [2], [_libtool_name=$lt_[]$1], - [_libtool_name=lt_dict_fetch([lt_decl_dict], [$1], [value])])[]dnl -m4_ifval([$2], [_$2])[]m4_popdef([_libtool_name])[]dnl -]) - - -# _LT_LIBTOOL_CONFIG_VARS -# ----------------------- -# Produce commented declarations of non-tagged libtool config variables -# suitable for insertion in the LIBTOOL CONFIG section of the `libtool' -# script. Tagged libtool config variables (even for the LIBTOOL CONFIG -# section) are produced by _LT_LIBTOOL_TAG_VARS. -m4_defun([_LT_LIBTOOL_CONFIG_VARS], -[m4_foreach([_lt_var], - m4_quote(_lt_decl_filter([tagged?], [no], [], lt_decl_varnames)), - [m4_n([_LT_LIBTOOL_DECLARE(_lt_var)])])]) - - -# _LT_LIBTOOL_TAG_VARS(TAG) -# ------------------------- -m4_define([_LT_LIBTOOL_TAG_VARS], -[m4_foreach([_lt_var], m4_quote(lt_decl_tag_varnames), - [m4_n([_LT_LIBTOOL_DECLARE(_lt_var, [$1])])])]) - - -# _LT_TAGVAR(VARNAME, [TAGNAME]) -# ------------------------------ -m4_define([_LT_TAGVAR], [m4_ifval([$2], [$1_$2], [$1])]) - - -# _LT_CONFIG_COMMANDS -# ------------------- -# Send accumulated output to $CONFIG_STATUS. Thanks to the lists of -# variables for single and double quote escaping we saved from calls -# to _LT_DECL, we can put quote escaped variables declarations -# into `config.status', and then the shell code to quote escape them in -# for loops in `config.status'. Finally, any additional code accumulated -# from calls to _LT_CONFIG_LIBTOOL_INIT is expanded. -m4_defun([_LT_CONFIG_COMMANDS], -[AC_PROVIDE_IFELSE([LT_OUTPUT], - dnl If the libtool generation code has been placed in $CONFIG_LT, - dnl instead of duplicating it all over again into config.status, - dnl then we will have config.status run $CONFIG_LT later, so it - dnl needs to know what name is stored there: - [AC_CONFIG_COMMANDS([libtool], - [$SHELL $CONFIG_LT || AS_EXIT(1)], [CONFIG_LT='$CONFIG_LT'])], - dnl If the libtool generation code is destined for config.status, - dnl expand the accumulated commands and init code now: - [AC_CONFIG_COMMANDS([libtool], - [_LT_OUTPUT_LIBTOOL_COMMANDS], [_LT_OUTPUT_LIBTOOL_COMMANDS_INIT])]) -])#_LT_CONFIG_COMMANDS - - -# Initialize. -m4_define([_LT_OUTPUT_LIBTOOL_COMMANDS_INIT], -[ - -# The HP-UX ksh and POSIX shell print the target directory to stdout -# if CDPATH is set. -(unset CDPATH) >/dev/null 2>&1 && unset CDPATH - -sed_quote_subst='$sed_quote_subst' -double_quote_subst='$double_quote_subst' -delay_variable_subst='$delay_variable_subst' -_LT_CONFIG_STATUS_DECLARATIONS -LTCC='$LTCC' -LTCFLAGS='$LTCFLAGS' -compiler='$compiler_DEFAULT' - -# A function that is used when there is no print builtin or printf. -func_fallback_echo () -{ - eval 'cat <<_LTECHO_EOF -\$[]1 -_LTECHO_EOF' -} - -# Quote evaled strings. -for var in lt_decl_all_varnames([[ \ -]], lt_decl_quote_varnames); do - case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in - *[[\\\\\\\`\\"\\\$]]*) - eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED \\"\\\$sed_quote_subst\\"\\\`\\\\\\"" - ;; - *) - eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\"" - ;; - esac -done - -# Double-quote double-evaled strings. -for var in lt_decl_all_varnames([[ \ -]], lt_decl_dquote_varnames); do - case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in - *[[\\\\\\\`\\"\\\$]]*) - eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\"" - ;; - *) - eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\"" - ;; - esac -done - -_LT_OUTPUT_LIBTOOL_INIT -]) - -# _LT_GENERATED_FILE_INIT(FILE, [COMMENT]) -# ------------------------------------ -# Generate a child script FILE with all initialization necessary to -# reuse the environment learned by the parent script, and make the -# file executable. If COMMENT is supplied, it is inserted after the -# `#!' sequence but before initialization text begins. After this -# macro, additional text can be appended to FILE to form the body of -# the child script. The macro ends with non-zero status if the -# file could not be fully written (such as if the disk is full). -m4_ifdef([AS_INIT_GENERATED], -[m4_defun([_LT_GENERATED_FILE_INIT],[AS_INIT_GENERATED($@)])], -[m4_defun([_LT_GENERATED_FILE_INIT], -[m4_require([AS_PREPARE])]dnl -[m4_pushdef([AS_MESSAGE_LOG_FD])]dnl -[lt_write_fail=0 -cat >$1 <<_ASEOF || lt_write_fail=1 -#! $SHELL -# Generated by $as_me. -$2 -SHELL=\${CONFIG_SHELL-$SHELL} -export SHELL -_ASEOF -cat >>$1 <<\_ASEOF || lt_write_fail=1 -AS_SHELL_SANITIZE -_AS_PREPARE -exec AS_MESSAGE_FD>&1 -_ASEOF -test $lt_write_fail = 0 && chmod +x $1[]dnl -m4_popdef([AS_MESSAGE_LOG_FD])])])# _LT_GENERATED_FILE_INIT - -# LT_OUTPUT -# --------- -# This macro allows early generation of the libtool script (before -# AC_OUTPUT is called), incase it is used in configure for compilation -# tests. -AC_DEFUN([LT_OUTPUT], -[: ${CONFIG_LT=./config.lt} -AC_MSG_NOTICE([creating $CONFIG_LT]) -_LT_GENERATED_FILE_INIT(["$CONFIG_LT"], -[# Run this file to recreate a libtool stub with the current configuration.]) - -cat >>"$CONFIG_LT" <<\_LTEOF -lt_cl_silent=false -exec AS_MESSAGE_LOG_FD>>config.log -{ - echo - AS_BOX([Running $as_me.]) -} >&AS_MESSAGE_LOG_FD - -lt_cl_help="\ -\`$as_me' creates a local libtool stub from the current configuration, -for use in further configure time tests before the real libtool is -generated. - -Usage: $[0] [[OPTIONS]] - - -h, --help print this help, then exit - -V, --version print version number, then exit - -q, --quiet do not print progress messages - -d, --debug don't remove temporary files - -Report bugs to ." - -lt_cl_version="\ -m4_ifset([AC_PACKAGE_NAME], [AC_PACKAGE_NAME ])config.lt[]dnl -m4_ifset([AC_PACKAGE_VERSION], [ AC_PACKAGE_VERSION]) -configured by $[0], generated by m4_PACKAGE_STRING. - -Copyright (C) 2010 Free Software Foundation, Inc. -This config.lt script is free software; the Free Software Foundation -gives unlimited permision to copy, distribute and modify it." - -while test $[#] != 0 -do - case $[1] in - --version | --v* | -V ) - echo "$lt_cl_version"; exit 0 ;; - --help | --h* | -h ) - echo "$lt_cl_help"; exit 0 ;; - --debug | --d* | -d ) - debug=: ;; - --quiet | --q* | --silent | --s* | -q ) - lt_cl_silent=: ;; - - -*) AC_MSG_ERROR([unrecognized option: $[1] -Try \`$[0] --help' for more information.]) ;; - - *) AC_MSG_ERROR([unrecognized argument: $[1] -Try \`$[0] --help' for more information.]) ;; - esac - shift -done - -if $lt_cl_silent; then - exec AS_MESSAGE_FD>/dev/null -fi -_LTEOF - -cat >>"$CONFIG_LT" <<_LTEOF -_LT_OUTPUT_LIBTOOL_COMMANDS_INIT -_LTEOF - -cat >>"$CONFIG_LT" <<\_LTEOF -AC_MSG_NOTICE([creating $ofile]) -_LT_OUTPUT_LIBTOOL_COMMANDS -AS_EXIT(0) -_LTEOF -chmod +x "$CONFIG_LT" - -# configure is writing to config.log, but config.lt does its own redirection, -# appending to config.log, which fails on DOS, as config.log is still kept -# open by configure. Here we exec the FD to /dev/null, effectively closing -# config.log, so it can be properly (re)opened and appended to by config.lt. -lt_cl_success=: -test "$silent" = yes && - lt_config_lt_args="$lt_config_lt_args --quiet" -exec AS_MESSAGE_LOG_FD>/dev/null -$SHELL "$CONFIG_LT" $lt_config_lt_args || lt_cl_success=false -exec AS_MESSAGE_LOG_FD>>config.log -$lt_cl_success || AS_EXIT(1) -])# LT_OUTPUT - - -# _LT_CONFIG(TAG) -# --------------- -# If TAG is the built-in tag, create an initial libtool script with a -# default configuration from the untagged config vars. Otherwise add code -# to config.status for appending the configuration named by TAG from the -# matching tagged config vars. -m4_defun([_LT_CONFIG], -[m4_require([_LT_FILEUTILS_DEFAULTS])dnl -_LT_CONFIG_SAVE_COMMANDS([ - m4_define([_LT_TAG], m4_if([$1], [], [C], [$1]))dnl - m4_if(_LT_TAG, [C], [ - # See if we are running on zsh, and set the options which allow our - # commands through without removal of \ escapes. - if test -n "${ZSH_VERSION+set}" ; then - setopt NO_GLOB_SUBST - fi - - cfgfile="${ofile}T" - trap "$RM \"$cfgfile\"; exit 1" 1 2 15 - $RM "$cfgfile" - - cat <<_LT_EOF >> "$cfgfile" -#! $SHELL - -# `$ECHO "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services. -# Generated automatically by $as_me ($PACKAGE$TIMESTAMP) $VERSION -# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: -# NOTE: Changes made to this file will be lost: look at ltmain.sh. -# -_LT_COPYING -_LT_LIBTOOL_TAGS - -# ### BEGIN LIBTOOL CONFIG -_LT_LIBTOOL_CONFIG_VARS -_LT_LIBTOOL_TAG_VARS -# ### END LIBTOOL CONFIG - -_LT_EOF - - case $host_os in - aix3*) - cat <<\_LT_EOF >> "$cfgfile" -# AIX sometimes has problems with the GCC collect2 program. For some -# reason, if we set the COLLECT_NAMES environment variable, the problems -# vanish in a puff of smoke. -if test "X${COLLECT_NAMES+set}" != Xset; then - COLLECT_NAMES= - export COLLECT_NAMES -fi -_LT_EOF - ;; - esac - - _LT_PROG_LTMAIN - - # We use sed instead of cat because bash on DJGPP gets confused if - # if finds mixed CR/LF and LF-only lines. Since sed operates in - # text mode, it properly converts lines to CR/LF. This bash problem - # is reportedly fixed, but why not run on old versions too? - sed '$q' "$ltmain" >> "$cfgfile" \ - || (rm -f "$cfgfile"; exit 1) - - _LT_PROG_REPLACE_SHELLFNS - - mv -f "$cfgfile" "$ofile" || - (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile") - chmod +x "$ofile" -], -[cat <<_LT_EOF >> "$ofile" - -dnl Unfortunately we have to use $1 here, since _LT_TAG is not expanded -dnl in a comment (ie after a #). -# ### BEGIN LIBTOOL TAG CONFIG: $1 -_LT_LIBTOOL_TAG_VARS(_LT_TAG) -# ### END LIBTOOL TAG CONFIG: $1 -_LT_EOF -])dnl /m4_if -], -[m4_if([$1], [], [ - PACKAGE='$PACKAGE' - VERSION='$VERSION' - TIMESTAMP='$TIMESTAMP' - RM='$RM' - ofile='$ofile'], []) -])dnl /_LT_CONFIG_SAVE_COMMANDS -])# _LT_CONFIG - - -# LT_SUPPORTED_TAG(TAG) -# --------------------- -# Trace this macro to discover what tags are supported by the libtool -# --tag option, using: -# autoconf --trace 'LT_SUPPORTED_TAG:$1' -AC_DEFUN([LT_SUPPORTED_TAG], []) - - -# C support is built-in for now -m4_define([_LT_LANG_C_enabled], []) -m4_define([_LT_TAGS], []) - - -# LT_LANG(LANG) -# ------------- -# Enable libtool support for the given language if not already enabled. -AC_DEFUN([LT_LANG], -[AC_BEFORE([$0], [LT_OUTPUT])dnl -m4_case([$1], - [C], [_LT_LANG(C)], - [C++], [_LT_LANG(CXX)], - [Java], [_LT_LANG(GCJ)], - [Fortran 77], [_LT_LANG(F77)], - [Fortran], [_LT_LANG(FC)], - [Windows Resource], [_LT_LANG(RC)], - [m4_ifdef([_LT_LANG_]$1[_CONFIG], - [_LT_LANG($1)], - [m4_fatal([$0: unsupported language: "$1"])])])dnl -])# LT_LANG - - -# _LT_LANG(LANGNAME) -# ------------------ -m4_defun([_LT_LANG], -[m4_ifdef([_LT_LANG_]$1[_enabled], [], - [LT_SUPPORTED_TAG([$1])dnl - m4_append([_LT_TAGS], [$1 ])dnl - m4_define([_LT_LANG_]$1[_enabled], [])dnl - _LT_LANG_$1_CONFIG($1)])dnl -])# _LT_LANG - - -# _LT_LANG_DEFAULT_CONFIG -# ----------------------- -m4_defun([_LT_LANG_DEFAULT_CONFIG], -[AC_PROVIDE_IFELSE([AC_PROG_CXX], - [LT_LANG(CXX)], - [m4_define([AC_PROG_CXX], defn([AC_PROG_CXX])[LT_LANG(CXX)])]) - -AC_PROVIDE_IFELSE([AC_PROG_F77], - [LT_LANG(F77)], - [m4_define([AC_PROG_F77], defn([AC_PROG_F77])[LT_LANG(F77)])]) - -AC_PROVIDE_IFELSE([AC_PROG_FC], - [LT_LANG(FC)], - [m4_define([AC_PROG_FC], defn([AC_PROG_FC])[LT_LANG(FC)])]) - -dnl The call to [A][M_PROG_GCJ] is quoted like that to stop aclocal -dnl pulling things in needlessly. -AC_PROVIDE_IFELSE([AC_PROG_GCJ], - [LT_LANG(GCJ)], - [AC_PROVIDE_IFELSE([A][M_PROG_GCJ], - [LT_LANG(GCJ)], - [AC_PROVIDE_IFELSE([LT_PROG_GCJ], - [LT_LANG(GCJ)], - [m4_ifdef([AC_PROG_GCJ], - [m4_define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[LT_LANG(GCJ)])]) - m4_ifdef([A][M_PROG_GCJ], - [m4_define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[LT_LANG(GCJ)])]) - m4_ifdef([LT_PROG_GCJ], - [m4_define([LT_PROG_GCJ], defn([LT_PROG_GCJ])[LT_LANG(GCJ)])])])])]) - -AC_PROVIDE_IFELSE([LT_PROG_RC], - [LT_LANG(RC)], - [m4_define([LT_PROG_RC], defn([LT_PROG_RC])[LT_LANG(RC)])]) -])# _LT_LANG_DEFAULT_CONFIG - -# Obsolete macros: -AU_DEFUN([AC_LIBTOOL_CXX], [LT_LANG(C++)]) -AU_DEFUN([AC_LIBTOOL_F77], [LT_LANG(Fortran 77)]) -AU_DEFUN([AC_LIBTOOL_FC], [LT_LANG(Fortran)]) -AU_DEFUN([AC_LIBTOOL_GCJ], [LT_LANG(Java)]) -AU_DEFUN([AC_LIBTOOL_RC], [LT_LANG(Windows Resource)]) -dnl aclocal-1.4 backwards compatibility: -dnl AC_DEFUN([AC_LIBTOOL_CXX], []) -dnl AC_DEFUN([AC_LIBTOOL_F77], []) -dnl AC_DEFUN([AC_LIBTOOL_FC], []) -dnl AC_DEFUN([AC_LIBTOOL_GCJ], []) -dnl AC_DEFUN([AC_LIBTOOL_RC], []) - - -# _LT_TAG_COMPILER -# ---------------- -m4_defun([_LT_TAG_COMPILER], -[AC_REQUIRE([AC_PROG_CC])dnl - -_LT_DECL([LTCC], [CC], [1], [A C compiler])dnl -_LT_DECL([LTCFLAGS], [CFLAGS], [1], [LTCC compiler flags])dnl -_LT_TAGDECL([CC], [compiler], [1], [A language specific compiler])dnl -_LT_TAGDECL([with_gcc], [GCC], [0], [Is the compiler the GNU compiler?])dnl - -# If no C compiler was specified, use CC. -LTCC=${LTCC-"$CC"} - -# If no C compiler flags were specified, use CFLAGS. -LTCFLAGS=${LTCFLAGS-"$CFLAGS"} - -# Allow CC to be a program name with arguments. -compiler=$CC -])# _LT_TAG_COMPILER - - -# _LT_COMPILER_BOILERPLATE -# ------------------------ -# Check for compiler boilerplate output or warnings with -# the simple compiler test code. -m4_defun([_LT_COMPILER_BOILERPLATE], -[m4_require([_LT_DECL_SED])dnl -ac_outfile=conftest.$ac_objext -echo "$lt_simple_compile_test_code" >conftest.$ac_ext -eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err -_lt_compiler_boilerplate=`cat conftest.err` -$RM conftest* -])# _LT_COMPILER_BOILERPLATE - - -# _LT_LINKER_BOILERPLATE -# ---------------------- -# Check for linker boilerplate output or warnings with -# the simple link test code. -m4_defun([_LT_LINKER_BOILERPLATE], -[m4_require([_LT_DECL_SED])dnl -ac_outfile=conftest.$ac_objext -echo "$lt_simple_link_test_code" >conftest.$ac_ext -eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err -_lt_linker_boilerplate=`cat conftest.err` -$RM -r conftest* -])# _LT_LINKER_BOILERPLATE - -# _LT_REQUIRED_DARWIN_CHECKS -# ------------------------- -m4_defun_once([_LT_REQUIRED_DARWIN_CHECKS],[ - case $host_os in - rhapsody* | darwin*) - AC_CHECK_TOOL([DSYMUTIL], [dsymutil], [:]) - AC_CHECK_TOOL([NMEDIT], [nmedit], [:]) - AC_CHECK_TOOL([LIPO], [lipo], [:]) - AC_CHECK_TOOL([OTOOL], [otool], [:]) - AC_CHECK_TOOL([OTOOL64], [otool64], [:]) - _LT_DECL([], [DSYMUTIL], [1], - [Tool to manipulate archived DWARF debug symbol files on Mac OS X]) - _LT_DECL([], [NMEDIT], [1], - [Tool to change global to local symbols on Mac OS X]) - _LT_DECL([], [LIPO], [1], - [Tool to manipulate fat objects and archives on Mac OS X]) - _LT_DECL([], [OTOOL], [1], - [ldd/readelf like tool for Mach-O binaries on Mac OS X]) - _LT_DECL([], [OTOOL64], [1], - [ldd/readelf like tool for 64 bit Mach-O binaries on Mac OS X 10.4]) - - AC_CACHE_CHECK([for -single_module linker flag],[lt_cv_apple_cc_single_mod], - [lt_cv_apple_cc_single_mod=no - if test -z "${LT_MULTI_MODULE}"; then - # By default we will add the -single_module flag. You can override - # by either setting the environment variable LT_MULTI_MODULE - # non-empty at configure time, or by adding -multi_module to the - # link flags. - rm -rf libconftest.dylib* - echo "int foo(void){return 1;}" > conftest.c - echo "$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \ --dynamiclib -Wl,-single_module conftest.c" >&AS_MESSAGE_LOG_FD - $LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \ - -dynamiclib -Wl,-single_module conftest.c 2>conftest.err - _lt_result=$? - if test -f libconftest.dylib && test ! -s conftest.err && test $_lt_result = 0; then - lt_cv_apple_cc_single_mod=yes - else - cat conftest.err >&AS_MESSAGE_LOG_FD - fi - rm -rf libconftest.dylib* - rm -f conftest.* - fi]) - AC_CACHE_CHECK([for -exported_symbols_list linker flag], - [lt_cv_ld_exported_symbols_list], - [lt_cv_ld_exported_symbols_list=no - save_LDFLAGS=$LDFLAGS - echo "_main" > conftest.sym - LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym" - AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])], - [lt_cv_ld_exported_symbols_list=yes], - [lt_cv_ld_exported_symbols_list=no]) - LDFLAGS="$save_LDFLAGS" - ]) - AC_CACHE_CHECK([for -force_load linker flag],[lt_cv_ld_force_load], - [lt_cv_ld_force_load=no - cat > conftest.c << _LT_EOF -int forced_loaded() { return 2;} -_LT_EOF - echo "$LTCC $LTCFLAGS -c -o conftest.o conftest.c" >&AS_MESSAGE_LOG_FD - $LTCC $LTCFLAGS -c -o conftest.o conftest.c 2>&AS_MESSAGE_LOG_FD - echo "$AR cru libconftest.a conftest.o" >&AS_MESSAGE_LOG_FD - $AR cru libconftest.a conftest.o 2>&AS_MESSAGE_LOG_FD - echo "$RANLIB libconftest.a" >&AS_MESSAGE_LOG_FD - $RANLIB libconftest.a 2>&AS_MESSAGE_LOG_FD - cat > conftest.c << _LT_EOF -int main() { return 0;} -_LT_EOF - echo "$LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a" >&AS_MESSAGE_LOG_FD - $LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a 2>conftest.err - _lt_result=$? - if test -f conftest && test ! -s conftest.err && test $_lt_result = 0 && $GREP forced_load conftest 2>&1 >/dev/null; then - lt_cv_ld_force_load=yes - else - cat conftest.err >&AS_MESSAGE_LOG_FD - fi - rm -f conftest.err libconftest.a conftest conftest.c - rm -rf conftest.dSYM - ]) - case $host_os in - rhapsody* | darwin1.[[012]]) - _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;; - darwin1.*) - _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; - darwin*) # darwin 5.x on - # if running on 10.5 or later, the deployment target defaults - # to the OS version, if on x86, and 10.4, the deployment - # target defaults to 10.4. Don't you love it? - case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in - 10.0,*86*-darwin8*|10.0,*-darwin[[91]]*) - _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;; - 10.[[012]]*) - _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; - 10.*) - _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;; - esac - ;; - esac - if test "$lt_cv_apple_cc_single_mod" = "yes"; then - _lt_dar_single_mod='$single_module' - fi - if test "$lt_cv_ld_exported_symbols_list" = "yes"; then - _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym' - else - _lt_dar_export_syms='~$NMEDIT -s $output_objdir/${libname}-symbols.expsym ${lib}' - fi - if test "$DSYMUTIL" != ":" && test "$lt_cv_ld_force_load" = "no"; then - _lt_dsymutil='~$DSYMUTIL $lib || :' - else - _lt_dsymutil= - fi - ;; - esac -]) - - -# _LT_DARWIN_LINKER_FEATURES -# -------------------------- -# Checks for linker and compiler features on darwin -m4_defun([_LT_DARWIN_LINKER_FEATURES], -[ - m4_require([_LT_REQUIRED_DARWIN_CHECKS]) - _LT_TAGVAR(archive_cmds_need_lc, $1)=no - _LT_TAGVAR(hardcode_direct, $1)=no - _LT_TAGVAR(hardcode_automatic, $1)=yes - _LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported - if test "$lt_cv_ld_force_load" = "yes"; then - _LT_TAGVAR(whole_archive_flag_spec, $1)='`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience ${wl}-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`' - else - _LT_TAGVAR(whole_archive_flag_spec, $1)='' - fi - _LT_TAGVAR(link_all_deplibs, $1)=yes - _LT_TAGVAR(allow_undefined_flag, $1)="$_lt_dar_allow_undefined" - case $cc_basename in - ifort*) _lt_dar_can_shared=yes ;; - *) _lt_dar_can_shared=$GCC ;; - esac - if test "$_lt_dar_can_shared" = "yes"; then - output_verbose_link_cmd=func_echo_all - _LT_TAGVAR(archive_cmds, $1)="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}" - _LT_TAGVAR(module_cmds, $1)="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}" - _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}" - _LT_TAGVAR(module_expsym_cmds, $1)="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}" - m4_if([$1], [CXX], -[ if test "$lt_cv_apple_cc_single_mod" != "yes"; then - _LT_TAGVAR(archive_cmds, $1)="\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dsymutil}" - _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dar_export_syms}${_lt_dsymutil}" - fi -],[]) - else - _LT_TAGVAR(ld_shlibs, $1)=no - fi -]) - -# _LT_SYS_MODULE_PATH_AIX([TAGNAME]) -# ---------------------------------- -# Links a minimal program and checks the executable -# for the system default hardcoded library path. In most cases, -# this is /usr/lib:/lib, but when the MPI compilers are used -# the location of the communication and MPI libs are included too. -# If we don't find anything, use the default library path according -# to the aix ld manual. -# Store the results from the different compilers for each TAGNAME. -# Allow to override them for all tags through lt_cv_aix_libpath. -m4_defun([_LT_SYS_MODULE_PATH_AIX], -[m4_require([_LT_DECL_SED])dnl -if test "${lt_cv_aix_libpath+set}" = set; then - aix_libpath=$lt_cv_aix_libpath -else - AC_CACHE_VAL([_LT_TAGVAR([lt_cv_aix_libpath_], [$1])], - [AC_LINK_IFELSE([AC_LANG_PROGRAM],[ - lt_aix_libpath_sed='[ - /Import File Strings/,/^$/ { - /^0/ { - s/^0 *\([^ ]*\) *$/\1/ - p - } - }]' - _LT_TAGVAR([lt_cv_aix_libpath_], [$1])=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` - # Check for a 64-bit object if we didn't find anything. - if test -z "$_LT_TAGVAR([lt_cv_aix_libpath_], [$1])"; then - _LT_TAGVAR([lt_cv_aix_libpath_], [$1])=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` - fi],[]) - if test -z "$_LT_TAGVAR([lt_cv_aix_libpath_], [$1])"; then - _LT_TAGVAR([lt_cv_aix_libpath_], [$1])="/usr/lib:/lib" - fi - ]) - aix_libpath=$_LT_TAGVAR([lt_cv_aix_libpath_], [$1]) -fi -])# _LT_SYS_MODULE_PATH_AIX - - -# _LT_SHELL_INIT(ARG) -# ------------------- -m4_define([_LT_SHELL_INIT], -[m4_divert_text([M4SH-INIT], [$1 -])])# _LT_SHELL_INIT - - - -# _LT_PROG_ECHO_BACKSLASH -# ----------------------- -# Find how we can fake an echo command that does not interpret backslash. -# In particular, with Autoconf 2.60 or later we add some code to the start -# of the generated configure script which will find a shell with a builtin -# printf (which we can use as an echo command). -m4_defun([_LT_PROG_ECHO_BACKSLASH], -[ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' -ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO -ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO - -AC_MSG_CHECKING([how to print strings]) -# Test print first, because it will be a builtin if present. -if test "X`( print -r -- -n ) 2>/dev/null`" = X-n && \ - test "X`print -r -- $ECHO 2>/dev/null`" = "X$ECHO"; then - ECHO='print -r --' -elif test "X`printf %s $ECHO 2>/dev/null`" = "X$ECHO"; then - ECHO='printf %s\n' -else - # Use this function as a fallback that always works. - func_fallback_echo () - { - eval 'cat <<_LTECHO_EOF -$[]1 -_LTECHO_EOF' - } - ECHO='func_fallback_echo' -fi - -# func_echo_all arg... -# Invoke $ECHO with all args, space-separated. -func_echo_all () -{ - $ECHO "$*" -} - -case "$ECHO" in - printf*) AC_MSG_RESULT([printf]) ;; - print*) AC_MSG_RESULT([print -r]) ;; - *) AC_MSG_RESULT([cat]) ;; -esac - -m4_ifdef([_AS_DETECT_SUGGESTED], -[_AS_DETECT_SUGGESTED([ - test -n "${ZSH_VERSION+set}${BASH_VERSION+set}" || ( - ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' - ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO - ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO - PATH=/empty FPATH=/empty; export PATH FPATH - test "X`printf %s $ECHO`" = "X$ECHO" \ - || test "X`print -r -- $ECHO`" = "X$ECHO" )])]) - -_LT_DECL([], [SHELL], [1], [Shell to use when invoking shell scripts]) -_LT_DECL([], [ECHO], [1], [An echo program that protects backslashes]) -])# _LT_PROG_ECHO_BACKSLASH - - -# _LT_WITH_SYSROOT -# ---------------- -AC_DEFUN([_LT_WITH_SYSROOT], -[AC_MSG_CHECKING([for sysroot]) -AC_ARG_WITH([sysroot], -[ --with-sysroot[=DIR] Search for dependent libraries within DIR - (or the compiler's sysroot if not specified).], -[], [with_sysroot=no]) - -dnl lt_sysroot will always be passed unquoted. We quote it here -dnl in case the user passed a directory name. -lt_sysroot= -case ${with_sysroot} in #( - yes) - if test "$GCC" = yes; then - lt_sysroot=`$CC --print-sysroot 2>/dev/null` - fi - ;; #( - /*) - lt_sysroot=`echo "$with_sysroot" | sed -e "$sed_quote_subst"` - ;; #( - no|'') - ;; #( - *) - AC_MSG_RESULT([${with_sysroot}]) - AC_MSG_ERROR([The sysroot must be an absolute path.]) - ;; -esac - - AC_MSG_RESULT([${lt_sysroot:-no}]) -_LT_DECL([], [lt_sysroot], [0], [The root where to search for ]dnl -[dependent libraries, and in which our libraries should be installed.])]) - -# _LT_ENABLE_LOCK -# --------------- -m4_defun([_LT_ENABLE_LOCK], -[AC_ARG_ENABLE([libtool-lock], - [AS_HELP_STRING([--disable-libtool-lock], - [avoid locking (might break parallel builds)])]) -test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes - -# Some flags need to be propagated to the compiler or linker for good -# libtool support. -case $host in -ia64-*-hpux*) - # Find out which ABI we are using. - echo 'int i;' > conftest.$ac_ext - if AC_TRY_EVAL(ac_compile); then - case `/usr/bin/file conftest.$ac_objext` in - *ELF-32*) - HPUX_IA64_MODE="32" - ;; - *ELF-64*) - HPUX_IA64_MODE="64" - ;; - esac - fi - rm -rf conftest* - ;; -*-*-irix6*) - # Find out which ABI we are using. - echo '[#]line '$LINENO' "configure"' > conftest.$ac_ext - if AC_TRY_EVAL(ac_compile); then - if test "$lt_cv_prog_gnu_ld" = yes; then - case `/usr/bin/file conftest.$ac_objext` in - *32-bit*) - LD="${LD-ld} -melf32bsmip" - ;; - *N32*) - LD="${LD-ld} -melf32bmipn32" - ;; - *64-bit*) - LD="${LD-ld} -melf64bmip" - ;; - esac - else - case `/usr/bin/file conftest.$ac_objext` in - *32-bit*) - LD="${LD-ld} -32" - ;; - *N32*) - LD="${LD-ld} -n32" - ;; - *64-bit*) - LD="${LD-ld} -64" - ;; - esac - fi - fi - rm -rf conftest* - ;; - -x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \ -s390*-*linux*|s390*-*tpf*|sparc*-*linux*) - # Find out which ABI we are using. - echo 'int i;' > conftest.$ac_ext - if AC_TRY_EVAL(ac_compile); then - case `/usr/bin/file conftest.o` in - *32-bit*) - case $host in - x86_64-*kfreebsd*-gnu) - LD="${LD-ld} -m elf_i386_fbsd" - ;; - x86_64-*linux*) - LD="${LD-ld} -m elf_i386" - ;; - ppc64-*linux*|powerpc64-*linux*) - LD="${LD-ld} -m elf32ppclinux" - ;; - s390x-*linux*) - LD="${LD-ld} -m elf_s390" - ;; - sparc64-*linux*) - LD="${LD-ld} -m elf32_sparc" - ;; - esac - ;; - *64-bit*) - case $host in - x86_64-*kfreebsd*-gnu) - LD="${LD-ld} -m elf_x86_64_fbsd" - ;; - x86_64-*linux*) - LD="${LD-ld} -m elf_x86_64" - ;; - ppc*-*linux*|powerpc*-*linux*) - LD="${LD-ld} -m elf64ppc" - ;; - s390*-*linux*|s390*-*tpf*) - LD="${LD-ld} -m elf64_s390" - ;; - sparc*-*linux*) - LD="${LD-ld} -m elf64_sparc" - ;; - esac - ;; - esac - fi - rm -rf conftest* - ;; - -*-*-sco3.2v5*) - # On SCO OpenServer 5, we need -belf to get full-featured binaries. - SAVE_CFLAGS="$CFLAGS" - CFLAGS="$CFLAGS -belf" - AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf, - [AC_LANG_PUSH(C) - AC_LINK_IFELSE([AC_LANG_PROGRAM([[]],[[]])],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no]) - AC_LANG_POP]) - if test x"$lt_cv_cc_needs_belf" != x"yes"; then - # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf - CFLAGS="$SAVE_CFLAGS" - fi - ;; -sparc*-*solaris*) - # Find out which ABI we are using. - echo 'int i;' > conftest.$ac_ext - if AC_TRY_EVAL(ac_compile); then - case `/usr/bin/file conftest.o` in - *64-bit*) - case $lt_cv_prog_gnu_ld in - yes*) LD="${LD-ld} -m elf64_sparc" ;; - *) - if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then - LD="${LD-ld} -64" - fi - ;; - esac - ;; - esac - fi - rm -rf conftest* - ;; -esac - -need_locks="$enable_libtool_lock" -])# _LT_ENABLE_LOCK - - -# _LT_PROG_AR -# ----------- -m4_defun([_LT_PROG_AR], -[AC_CHECK_TOOLS(AR, [ar], false) -: ${AR=ar} -: ${AR_FLAGS=cru} -_LT_DECL([], [AR], [1], [The archiver]) -_LT_DECL([], [AR_FLAGS], [1], [Flags to create an archive]) - -AC_CACHE_CHECK([for archiver @FILE support], [lt_cv_ar_at_file], - [lt_cv_ar_at_file=no - AC_COMPILE_IFELSE([AC_LANG_PROGRAM], - [echo conftest.$ac_objext > conftest.lst - lt_ar_try='$AR $AR_FLAGS libconftest.a @conftest.lst >&AS_MESSAGE_LOG_FD' - AC_TRY_EVAL([lt_ar_try]) - if test "$ac_status" -eq 0; then - # Ensure the archiver fails upon bogus file names. - rm -f conftest.$ac_objext libconftest.a - AC_TRY_EVAL([lt_ar_try]) - if test "$ac_status" -ne 0; then - lt_cv_ar_at_file=@ - fi - fi - rm -f conftest.* libconftest.a - ]) - ]) - -if test "x$lt_cv_ar_at_file" = xno; then - archiver_list_spec= -else - archiver_list_spec=$lt_cv_ar_at_file -fi -_LT_DECL([], [archiver_list_spec], [1], - [How to feed a file listing to the archiver]) -])# _LT_PROG_AR - - -# _LT_CMD_OLD_ARCHIVE -# ------------------- -m4_defun([_LT_CMD_OLD_ARCHIVE], -[_LT_PROG_AR - -AC_CHECK_TOOL(STRIP, strip, :) -test -z "$STRIP" && STRIP=: -_LT_DECL([], [STRIP], [1], [A symbol stripping program]) - -AC_CHECK_TOOL(RANLIB, ranlib, :) -test -z "$RANLIB" && RANLIB=: -_LT_DECL([], [RANLIB], [1], - [Commands used to install an old-style archive]) - -# Determine commands to create old-style static archives. -old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs' -old_postinstall_cmds='chmod 644 $oldlib' -old_postuninstall_cmds= - -if test -n "$RANLIB"; then - case $host_os in - openbsd*) - old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$oldlib" - ;; - *) - old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$oldlib" - ;; - esac - old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib" -fi - -case $host_os in - darwin*) - lock_old_archive_extraction=yes ;; - *) - lock_old_archive_extraction=no ;; -esac -_LT_DECL([], [old_postinstall_cmds], [2]) -_LT_DECL([], [old_postuninstall_cmds], [2]) -_LT_TAGDECL([], [old_archive_cmds], [2], - [Commands used to build an old-style archive]) -_LT_DECL([], [lock_old_archive_extraction], [0], - [Whether to use a lock for old archive extraction]) -])# _LT_CMD_OLD_ARCHIVE - - -# _LT_COMPILER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS, -# [OUTPUT-FILE], [ACTION-SUCCESS], [ACTION-FAILURE]) -# ---------------------------------------------------------------- -# Check whether the given compiler option works -AC_DEFUN([_LT_COMPILER_OPTION], -[m4_require([_LT_FILEUTILS_DEFAULTS])dnl -m4_require([_LT_DECL_SED])dnl -AC_CACHE_CHECK([$1], [$2], - [$2=no - m4_if([$4], , [ac_outfile=conftest.$ac_objext], [ac_outfile=$4]) - echo "$lt_simple_compile_test_code" > conftest.$ac_ext - lt_compiler_flag="$3" - # Insert the option either (1) after the last *FLAGS variable, or - # (2) before a word containing "conftest.", or (3) at the end. - # Note that $ac_compile itself does not contain backslashes and begins - # with a dollar sign (not a hyphen), so the echo should work correctly. - # The option is referenced via a variable to avoid confusing sed. - lt_compile=`echo "$ac_compile" | $SED \ - -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ - -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \ - -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&AS_MESSAGE_LOG_FD) - (eval "$lt_compile" 2>conftest.err) - ac_status=$? - cat conftest.err >&AS_MESSAGE_LOG_FD - echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD - if (exit $ac_status) && test -s "$ac_outfile"; then - # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings other than the usual output. - $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp - $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 - if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then - $2=yes - fi - fi - $RM conftest* -]) - -if test x"[$]$2" = xyes; then - m4_if([$5], , :, [$5]) -else - m4_if([$6], , :, [$6]) -fi -])# _LT_COMPILER_OPTION - -# Old name: -AU_ALIAS([AC_LIBTOOL_COMPILER_OPTION], [_LT_COMPILER_OPTION]) -dnl aclocal-1.4 backwards compatibility: -dnl AC_DEFUN([AC_LIBTOOL_COMPILER_OPTION], []) - - -# _LT_LINKER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS, -# [ACTION-SUCCESS], [ACTION-FAILURE]) -# ---------------------------------------------------- -# Check whether the given linker option works -AC_DEFUN([_LT_LINKER_OPTION], -[m4_require([_LT_FILEUTILS_DEFAULTS])dnl -m4_require([_LT_DECL_SED])dnl -AC_CACHE_CHECK([$1], [$2], - [$2=no - save_LDFLAGS="$LDFLAGS" - LDFLAGS="$LDFLAGS $3" - echo "$lt_simple_link_test_code" > conftest.$ac_ext - if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then - # The linker can only warn and ignore the option if not recognized - # So say no if there are warnings - if test -s conftest.err; then - # Append any errors to the config.log. - cat conftest.err 1>&AS_MESSAGE_LOG_FD - $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp - $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 - if diff conftest.exp conftest.er2 >/dev/null; then - $2=yes - fi - else - $2=yes - fi - fi - $RM -r conftest* - LDFLAGS="$save_LDFLAGS" -]) - -if test x"[$]$2" = xyes; then - m4_if([$4], , :, [$4]) -else - m4_if([$5], , :, [$5]) -fi -])# _LT_LINKER_OPTION - -# Old name: -AU_ALIAS([AC_LIBTOOL_LINKER_OPTION], [_LT_LINKER_OPTION]) -dnl aclocal-1.4 backwards compatibility: -dnl AC_DEFUN([AC_LIBTOOL_LINKER_OPTION], []) - - -# LT_CMD_MAX_LEN -#--------------- -AC_DEFUN([LT_CMD_MAX_LEN], -[AC_REQUIRE([AC_CANONICAL_HOST])dnl -# find the maximum length of command line arguments -AC_MSG_CHECKING([the maximum length of command line arguments]) -AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl - i=0 - teststring="ABCD" - - case $build_os in - msdosdjgpp*) - # On DJGPP, this test can blow up pretty badly due to problems in libc - # (any single argument exceeding 2000 bytes causes a buffer overrun - # during glob expansion). Even if it were fixed, the result of this - # check would be larger than it should be. - lt_cv_sys_max_cmd_len=12288; # 12K is about right - ;; - - gnu*) - # Under GNU Hurd, this test is not required because there is - # no limit to the length of command line arguments. - # Libtool will interpret -1 as no limit whatsoever - lt_cv_sys_max_cmd_len=-1; - ;; - - cygwin* | mingw* | cegcc*) - # On Win9x/ME, this test blows up -- it succeeds, but takes - # about 5 minutes as the teststring grows exponentially. - # Worse, since 9x/ME are not pre-emptively multitasking, - # you end up with a "frozen" computer, even though with patience - # the test eventually succeeds (with a max line length of 256k). - # Instead, let's just punt: use the minimum linelength reported by - # all of the supported platforms: 8192 (on NT/2K/XP). - lt_cv_sys_max_cmd_len=8192; - ;; - - mint*) - # On MiNT this can take a long time and run out of memory. - lt_cv_sys_max_cmd_len=8192; - ;; - - amigaos*) - # On AmigaOS with pdksh, this test takes hours, literally. - # So we just punt and use a minimum line length of 8192. - lt_cv_sys_max_cmd_len=8192; - ;; - - netbsd* | freebsd* | openbsd* | darwin* | dragonfly*) - # This has been around since 386BSD, at least. Likely further. - if test -x /sbin/sysctl; then - lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax` - elif test -x /usr/sbin/sysctl; then - lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax` - else - lt_cv_sys_max_cmd_len=65536 # usable default for all BSDs - fi - # And add a safety zone - lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` - lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` - ;; - - interix*) - # We know the value 262144 and hardcode it with a safety zone (like BSD) - lt_cv_sys_max_cmd_len=196608 - ;; - - osf*) - # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure - # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not - # nice to cause kernel panics so lets avoid the loop below. - # First set a reasonable default. - lt_cv_sys_max_cmd_len=16384 - # - if test -x /sbin/sysconfig; then - case `/sbin/sysconfig -q proc exec_disable_arg_limit` in - *1*) lt_cv_sys_max_cmd_len=-1 ;; - esac - fi - ;; - sco3.2v5*) - lt_cv_sys_max_cmd_len=102400 - ;; - sysv5* | sco5v6* | sysv4.2uw2*) - kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null` - if test -n "$kargmax"; then - lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[[ ]]//'` - else - lt_cv_sys_max_cmd_len=32768 - fi - ;; - *) - lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null` - if test -n "$lt_cv_sys_max_cmd_len"; then - lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` - lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` - else - # Make teststring a little bigger before we do anything with it. - # a 1K string should be a reasonable start. - for i in 1 2 3 4 5 6 7 8 ; do - teststring=$teststring$teststring - done - SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}} - # If test is not a shell built-in, we'll probably end up computing a - # maximum length that is only half of the actual maximum length, but - # we can't tell. - while { test "X"`func_fallback_echo "$teststring$teststring" 2>/dev/null` \ - = "X$teststring$teststring"; } >/dev/null 2>&1 && - test $i != 17 # 1/2 MB should be enough - do - i=`expr $i + 1` - teststring=$teststring$teststring - done - # Only check the string length outside the loop. - lt_cv_sys_max_cmd_len=`expr "X$teststring" : ".*" 2>&1` - teststring= - # Add a significant safety factor because C++ compilers can tack on - # massive amounts of additional arguments before passing them to the - # linker. It appears as though 1/2 is a usable value. - lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2` - fi - ;; - esac -]) -if test -n $lt_cv_sys_max_cmd_len ; then - AC_MSG_RESULT($lt_cv_sys_max_cmd_len) -else - AC_MSG_RESULT(none) -fi -max_cmd_len=$lt_cv_sys_max_cmd_len -_LT_DECL([], [max_cmd_len], [0], - [What is the maximum length of a command?]) -])# LT_CMD_MAX_LEN - -# Old name: -AU_ALIAS([AC_LIBTOOL_SYS_MAX_CMD_LEN], [LT_CMD_MAX_LEN]) -dnl aclocal-1.4 backwards compatibility: -dnl AC_DEFUN([AC_LIBTOOL_SYS_MAX_CMD_LEN], []) - - -# _LT_HEADER_DLFCN -# ---------------- -m4_defun([_LT_HEADER_DLFCN], -[AC_CHECK_HEADERS([dlfcn.h], [], [], [AC_INCLUDES_DEFAULT])dnl -])# _LT_HEADER_DLFCN - - -# _LT_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE, -# ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING) -# ---------------------------------------------------------------- -m4_defun([_LT_TRY_DLOPEN_SELF], -[m4_require([_LT_HEADER_DLFCN])dnl -if test "$cross_compiling" = yes; then : - [$4] -else - lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 - lt_status=$lt_dlunknown - cat > conftest.$ac_ext <<_LT_EOF -[#line $LINENO "configure" -#include "confdefs.h" - -#if HAVE_DLFCN_H -#include -#endif - -#include - -#ifdef RTLD_GLOBAL -# define LT_DLGLOBAL RTLD_GLOBAL -#else -# ifdef DL_GLOBAL -# define LT_DLGLOBAL DL_GLOBAL -# else -# define LT_DLGLOBAL 0 -# endif -#endif - -/* We may have to define LT_DLLAZY_OR_NOW in the command line if we - find out it does not work in some platform. */ -#ifndef LT_DLLAZY_OR_NOW -# ifdef RTLD_LAZY -# define LT_DLLAZY_OR_NOW RTLD_LAZY -# else -# ifdef DL_LAZY -# define LT_DLLAZY_OR_NOW DL_LAZY -# else -# ifdef RTLD_NOW -# define LT_DLLAZY_OR_NOW RTLD_NOW -# else -# ifdef DL_NOW -# define LT_DLLAZY_OR_NOW DL_NOW -# else -# define LT_DLLAZY_OR_NOW 0 -# endif -# endif -# endif -# endif -#endif - -/* When -fvisbility=hidden is used, assume the code has been annotated - correspondingly for the symbols needed. */ -#if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3)) -int fnord () __attribute__((visibility("default"))); -#endif - -int fnord () { return 42; } -int main () -{ - void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); - int status = $lt_dlunknown; - - if (self) - { - if (dlsym (self,"fnord")) status = $lt_dlno_uscore; - else - { - if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; - else puts (dlerror ()); - } - /* dlclose (self); */ - } - else - puts (dlerror ()); - - return status; -}] -_LT_EOF - if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext} 2>/dev/null; then - (./conftest; exit; ) >&AS_MESSAGE_LOG_FD 2>/dev/null - lt_status=$? - case x$lt_status in - x$lt_dlno_uscore) $1 ;; - x$lt_dlneed_uscore) $2 ;; - x$lt_dlunknown|x*) $3 ;; - esac - else : - # compilation failed - $3 - fi -fi -rm -fr conftest* -])# _LT_TRY_DLOPEN_SELF - - -# LT_SYS_DLOPEN_SELF -# ------------------ -AC_DEFUN([LT_SYS_DLOPEN_SELF], -[m4_require([_LT_HEADER_DLFCN])dnl -if test "x$enable_dlopen" != xyes; then - enable_dlopen=unknown - enable_dlopen_self=unknown - enable_dlopen_self_static=unknown -else - lt_cv_dlopen=no - lt_cv_dlopen_libs= - - case $host_os in - beos*) - lt_cv_dlopen="load_add_on" - lt_cv_dlopen_libs= - lt_cv_dlopen_self=yes - ;; - - mingw* | pw32* | cegcc*) - lt_cv_dlopen="LoadLibrary" - lt_cv_dlopen_libs= - ;; - - cygwin*) - lt_cv_dlopen="dlopen" - lt_cv_dlopen_libs= - ;; - - darwin*) - # if libdl is installed we need to link against it - AC_CHECK_LIB([dl], [dlopen], - [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],[ - lt_cv_dlopen="dyld" - lt_cv_dlopen_libs= - lt_cv_dlopen_self=yes - ]) - ;; - - *) - AC_CHECK_FUNC([shl_load], - [lt_cv_dlopen="shl_load"], - [AC_CHECK_LIB([dld], [shl_load], - [lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld"], - [AC_CHECK_FUNC([dlopen], - [lt_cv_dlopen="dlopen"], - [AC_CHECK_LIB([dl], [dlopen], - [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"], - [AC_CHECK_LIB([svld], [dlopen], - [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"], - [AC_CHECK_LIB([dld], [dld_link], - [lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld"]) - ]) - ]) - ]) - ]) - ]) - ;; - esac - - if test "x$lt_cv_dlopen" != xno; then - enable_dlopen=yes - else - enable_dlopen=no - fi - - case $lt_cv_dlopen in - dlopen) - save_CPPFLAGS="$CPPFLAGS" - test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H" - - save_LDFLAGS="$LDFLAGS" - wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\" - - save_LIBS="$LIBS" - LIBS="$lt_cv_dlopen_libs $LIBS" - - AC_CACHE_CHECK([whether a program can dlopen itself], - lt_cv_dlopen_self, [dnl - _LT_TRY_DLOPEN_SELF( - lt_cv_dlopen_self=yes, lt_cv_dlopen_self=yes, - lt_cv_dlopen_self=no, lt_cv_dlopen_self=cross) - ]) - - if test "x$lt_cv_dlopen_self" = xyes; then - wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\" - AC_CACHE_CHECK([whether a statically linked program can dlopen itself], - lt_cv_dlopen_self_static, [dnl - _LT_TRY_DLOPEN_SELF( - lt_cv_dlopen_self_static=yes, lt_cv_dlopen_self_static=yes, - lt_cv_dlopen_self_static=no, lt_cv_dlopen_self_static=cross) - ]) - fi - - CPPFLAGS="$save_CPPFLAGS" - LDFLAGS="$save_LDFLAGS" - LIBS="$save_LIBS" - ;; - esac - - case $lt_cv_dlopen_self in - yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;; - *) enable_dlopen_self=unknown ;; - esac - - case $lt_cv_dlopen_self_static in - yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;; - *) enable_dlopen_self_static=unknown ;; - esac -fi -_LT_DECL([dlopen_support], [enable_dlopen], [0], - [Whether dlopen is supported]) -_LT_DECL([dlopen_self], [enable_dlopen_self], [0], - [Whether dlopen of programs is supported]) -_LT_DECL([dlopen_self_static], [enable_dlopen_self_static], [0], - [Whether dlopen of statically linked programs is supported]) -])# LT_SYS_DLOPEN_SELF - -# Old name: -AU_ALIAS([AC_LIBTOOL_DLOPEN_SELF], [LT_SYS_DLOPEN_SELF]) -dnl aclocal-1.4 backwards compatibility: -dnl AC_DEFUN([AC_LIBTOOL_DLOPEN_SELF], []) - - -# _LT_COMPILER_C_O([TAGNAME]) -# --------------------------- -# Check to see if options -c and -o are simultaneously supported by compiler. -# This macro does not hard code the compiler like AC_PROG_CC_C_O. -m4_defun([_LT_COMPILER_C_O], -[m4_require([_LT_DECL_SED])dnl -m4_require([_LT_FILEUTILS_DEFAULTS])dnl -m4_require([_LT_TAG_COMPILER])dnl -AC_CACHE_CHECK([if $compiler supports -c -o file.$ac_objext], - [_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)], - [_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=no - $RM -r conftest 2>/dev/null - mkdir conftest - cd conftest - mkdir out - echo "$lt_simple_compile_test_code" > conftest.$ac_ext - - lt_compiler_flag="-o out/conftest2.$ac_objext" - # Insert the option either (1) after the last *FLAGS variable, or - # (2) before a word containing "conftest.", or (3) at the end. - # Note that $ac_compile itself does not contain backslashes and begins - # with a dollar sign (not a hyphen), so the echo should work correctly. - lt_compile=`echo "$ac_compile" | $SED \ - -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ - -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \ - -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&AS_MESSAGE_LOG_FD) - (eval "$lt_compile" 2>out/conftest.err) - ac_status=$? - cat out/conftest.err >&AS_MESSAGE_LOG_FD - echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD - if (exit $ac_status) && test -s out/conftest2.$ac_objext - then - # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings - $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp - $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 - if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then - _LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes - fi - fi - chmod u+w . 2>&AS_MESSAGE_LOG_FD - $RM conftest* - # SGI C++ compiler will create directory out/ii_files/ for - # template instantiation - test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files - $RM out/* && rmdir out - cd .. - $RM -r conftest - $RM conftest* -]) -_LT_TAGDECL([compiler_c_o], [lt_cv_prog_compiler_c_o], [1], - [Does compiler simultaneously support -c and -o options?]) -])# _LT_COMPILER_C_O - - -# _LT_COMPILER_FILE_LOCKS([TAGNAME]) -# ---------------------------------- -# Check to see if we can do hard links to lock some files if needed -m4_defun([_LT_COMPILER_FILE_LOCKS], -[m4_require([_LT_ENABLE_LOCK])dnl -m4_require([_LT_FILEUTILS_DEFAULTS])dnl -_LT_COMPILER_C_O([$1]) - -hard_links="nottested" -if test "$_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)" = no && test "$need_locks" != no; then - # do not overwrite the value of need_locks provided by the user - AC_MSG_CHECKING([if we can lock with hard links]) - hard_links=yes - $RM conftest* - ln conftest.a conftest.b 2>/dev/null && hard_links=no - touch conftest.a - ln conftest.a conftest.b 2>&5 || hard_links=no - ln conftest.a conftest.b 2>/dev/null && hard_links=no - AC_MSG_RESULT([$hard_links]) - if test "$hard_links" = no; then - AC_MSG_WARN([`$CC' does not support `-c -o', so `make -j' may be unsafe]) - need_locks=warn - fi -else - need_locks=no -fi -_LT_DECL([], [need_locks], [1], [Must we lock files when doing compilation?]) -])# _LT_COMPILER_FILE_LOCKS - - -# _LT_CHECK_OBJDIR -# ---------------- -m4_defun([_LT_CHECK_OBJDIR], -[AC_CACHE_CHECK([for objdir], [lt_cv_objdir], -[rm -f .libs 2>/dev/null -mkdir .libs 2>/dev/null -if test -d .libs; then - lt_cv_objdir=.libs -else - # MS-DOS does not allow filenames that begin with a dot. - lt_cv_objdir=_libs -fi -rmdir .libs 2>/dev/null]) -objdir=$lt_cv_objdir -_LT_DECL([], [objdir], [0], - [The name of the directory that contains temporary libtool files])dnl -m4_pattern_allow([LT_OBJDIR])dnl -AC_DEFINE_UNQUOTED(LT_OBJDIR, "$lt_cv_objdir/", - [Define to the sub-directory in which libtool stores uninstalled libraries.]) -])# _LT_CHECK_OBJDIR - - -# _LT_LINKER_HARDCODE_LIBPATH([TAGNAME]) -# -------------------------------------- -# Check hardcoding attributes. -m4_defun([_LT_LINKER_HARDCODE_LIBPATH], -[AC_MSG_CHECKING([how to hardcode library paths into programs]) -_LT_TAGVAR(hardcode_action, $1)= -if test -n "$_LT_TAGVAR(hardcode_libdir_flag_spec, $1)" || - test -n "$_LT_TAGVAR(runpath_var, $1)" || - test "X$_LT_TAGVAR(hardcode_automatic, $1)" = "Xyes" ; then - - # We can hardcode non-existent directories. - if test "$_LT_TAGVAR(hardcode_direct, $1)" != no && - # If the only mechanism to avoid hardcoding is shlibpath_var, we - # have to relink, otherwise we might link with an installed library - # when we should be linking with a yet-to-be-installed one - ## test "$_LT_TAGVAR(hardcode_shlibpath_var, $1)" != no && - test "$_LT_TAGVAR(hardcode_minus_L, $1)" != no; then - # Linking always hardcodes the temporary library directory. - _LT_TAGVAR(hardcode_action, $1)=relink - else - # We can link without hardcoding, and we can hardcode nonexisting dirs. - _LT_TAGVAR(hardcode_action, $1)=immediate - fi -else - # We cannot hardcode anything, or else we can only hardcode existing - # directories. - _LT_TAGVAR(hardcode_action, $1)=unsupported -fi -AC_MSG_RESULT([$_LT_TAGVAR(hardcode_action, $1)]) - -if test "$_LT_TAGVAR(hardcode_action, $1)" = relink || - test "$_LT_TAGVAR(inherit_rpath, $1)" = yes; then - # Fast installation is not supported - enable_fast_install=no -elif test "$shlibpath_overrides_runpath" = yes || - test "$enable_shared" = no; then - # Fast installation is not necessary - enable_fast_install=needless -fi -_LT_TAGDECL([], [hardcode_action], [0], - [How to hardcode a shared library path into an executable]) -])# _LT_LINKER_HARDCODE_LIBPATH - - -# _LT_CMD_STRIPLIB -# ---------------- -m4_defun([_LT_CMD_STRIPLIB], -[m4_require([_LT_DECL_EGREP]) -striplib= -old_striplib= -AC_MSG_CHECKING([whether stripping libraries is possible]) -if test -n "$STRIP" && $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then - test -z "$old_striplib" && old_striplib="$STRIP --strip-debug" - test -z "$striplib" && striplib="$STRIP --strip-unneeded" - AC_MSG_RESULT([yes]) -else -# FIXME - insert some real tests, host_os isn't really good enough - case $host_os in - darwin*) - if test -n "$STRIP" ; then - striplib="$STRIP -x" - old_striplib="$STRIP -S" - AC_MSG_RESULT([yes]) - else - AC_MSG_RESULT([no]) - fi - ;; - *) - AC_MSG_RESULT([no]) - ;; - esac -fi -_LT_DECL([], [old_striplib], [1], [Commands to strip libraries]) -_LT_DECL([], [striplib], [1]) -])# _LT_CMD_STRIPLIB - - -# _LT_SYS_DYNAMIC_LINKER([TAG]) -# ----------------------------- -# PORTME Fill in your ld.so characteristics -m4_defun([_LT_SYS_DYNAMIC_LINKER], -[AC_REQUIRE([AC_CANONICAL_HOST])dnl -m4_require([_LT_DECL_EGREP])dnl -m4_require([_LT_FILEUTILS_DEFAULTS])dnl -m4_require([_LT_DECL_OBJDUMP])dnl -m4_require([_LT_DECL_SED])dnl -m4_require([_LT_CHECK_SHELL_FEATURES])dnl -AC_MSG_CHECKING([dynamic linker characteristics]) -m4_if([$1], - [], [ -if test "$GCC" = yes; then - case $host_os in - darwin*) lt_awk_arg="/^libraries:/,/LR/" ;; - *) lt_awk_arg="/^libraries:/" ;; - esac - case $host_os in - mingw* | cegcc*) lt_sed_strip_eq="s,=\([[A-Za-z]]:\),\1,g" ;; - *) lt_sed_strip_eq="s,=/,/,g" ;; - esac - lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e $lt_sed_strip_eq` - case $lt_search_path_spec in - *\;*) - # if the path contains ";" then we assume it to be the separator - # otherwise default to the standard path separator (i.e. ":") - it is - # assumed that no part of a normal pathname contains ";" but that should - # okay in the real world where ";" in dirpaths is itself problematic. - lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED 's/;/ /g'` - ;; - *) - lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED "s/$PATH_SEPARATOR/ /g"` - ;; - esac - # Ok, now we have the path, separated by spaces, we can step through it - # and add multilib dir if necessary. - lt_tmp_lt_search_path_spec= - lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null` - for lt_sys_path in $lt_search_path_spec; do - if test -d "$lt_sys_path/$lt_multi_os_dir"; then - lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir" - else - test -d "$lt_sys_path" && \ - lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path" - fi - done - lt_search_path_spec=`$ECHO "$lt_tmp_lt_search_path_spec" | awk ' -BEGIN {RS=" "; FS="/|\n";} { - lt_foo=""; - lt_count=0; - for (lt_i = NF; lt_i > 0; lt_i--) { - if ($lt_i != "" && $lt_i != ".") { - if ($lt_i == "..") { - lt_count++; - } else { - if (lt_count == 0) { - lt_foo="/" $lt_i lt_foo; - } else { - lt_count--; - } - } - } - } - if (lt_foo != "") { lt_freq[[lt_foo]]++; } - if (lt_freq[[lt_foo]] == 1) { print lt_foo; } -}'` - # AWK program above erroneously prepends '/' to C:/dos/paths - # for these hosts. - case $host_os in - mingw* | cegcc*) lt_search_path_spec=`$ECHO "$lt_search_path_spec" |\ - $SED 's,/\([[A-Za-z]]:\),\1,g'` ;; - esac - sys_lib_search_path_spec=`$ECHO "$lt_search_path_spec" | $lt_NL2SP` -else - sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" -fi]) -library_names_spec= -libname_spec='lib$name' -soname_spec= -shrext_cmds=".so" -postinstall_cmds= -postuninstall_cmds= -finish_cmds= -finish_eval= -shlibpath_var= -shlibpath_overrides_runpath=unknown -version_type=none -dynamic_linker="$host_os ld.so" -sys_lib_dlsearch_path_spec="/lib /usr/lib" -need_lib_prefix=unknown -hardcode_into_libs=no - -# when you set need_version to no, make sure it does not cause -set_version -# flags to be left without arguments -need_version=unknown - -case $host_os in -aix3*) - version_type=linux - library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a' - shlibpath_var=LIBPATH - - # AIX 3 has no versioning support, so we append a major version to the name. - soname_spec='${libname}${release}${shared_ext}$major' - ;; - -aix[[4-9]]*) - version_type=linux - need_lib_prefix=no - need_version=no - hardcode_into_libs=yes - if test "$host_cpu" = ia64; then - # AIX 5 supports IA64 - library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}' - shlibpath_var=LD_LIBRARY_PATH - else - # With GCC up to 2.95.x, collect2 would create an import file - # for dependence libraries. The import file would start with - # the line `#! .'. This would cause the generated library to - # depend on `.', always an invalid library. This was fixed in - # development snapshots of GCC prior to 3.0. - case $host_os in - aix4 | aix4.[[01]] | aix4.[[01]].*) - if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' - echo ' yes ' - echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then - : - else - can_build_shared=no - fi - ;; - esac - # AIX (on Power*) has no versioning support, so currently we can not hardcode correct - # soname into executable. Probably we can add versioning support to - # collect2, so additional links can be useful in future. - if test "$aix_use_runtimelinking" = yes; then - # If using run time linking (on AIX 4.2 or later) use lib.so - # instead of lib.a to let people know that these are not - # typical AIX shared libraries. - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - else - # We preserve .a as extension for shared libraries through AIX4.2 - # and later when we are not doing run time linking. - library_names_spec='${libname}${release}.a $libname.a' - soname_spec='${libname}${release}${shared_ext}$major' - fi - shlibpath_var=LIBPATH - fi - ;; - -amigaos*) - case $host_cpu in - powerpc) - # Since July 2007 AmigaOS4 officially supports .so libraries. - # When compiling the executable, add -use-dynld -Lsobjs: to the compileline. - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - ;; - m68k) - library_names_spec='$libname.ixlibrary $libname.a' - # Create ${libname}_ixlibrary.a entries in /sys/libs. - finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' - ;; - esac - ;; - -beos*) - library_names_spec='${libname}${shared_ext}' - dynamic_linker="$host_os ld.so" - shlibpath_var=LIBRARY_PATH - ;; - -bsdi[[45]]*) - version_type=linux - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' - shlibpath_var=LD_LIBRARY_PATH - sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" - sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" - # the default ld.so.conf also contains /usr/contrib/lib and - # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow - # libtool to hard-code these into programs - ;; - -cygwin* | mingw* | pw32* | cegcc*) - version_type=windows - shrext_cmds=".dll" - need_version=no - need_lib_prefix=no - - case $GCC,$cc_basename in - yes,*) - # gcc - library_names_spec='$libname.dll.a' - # DLL is installed to $(libdir)/../bin by postinstall_cmds - postinstall_cmds='base_file=`basename \${file}`~ - dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~ - dldir=$destdir/`dirname \$dlpath`~ - test -d \$dldir || mkdir -p \$dldir~ - $install_prog $dir/$dlname \$dldir/$dlname~ - chmod a+x \$dldir/$dlname~ - if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then - eval '\''$striplib \$dldir/$dlname'\'' || exit \$?; - fi' - postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ - dlpath=$dir/\$dldll~ - $RM \$dlpath' - shlibpath_overrides_runpath=yes - - case $host_os in - cygwin*) - # Cygwin DLLs use 'cyg' prefix rather than 'lib' - soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' -m4_if([$1], [],[ - sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/lib/w32api"]) - ;; - mingw* | cegcc*) - # MinGW DLLs use traditional 'lib' prefix - soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' - ;; - pw32*) - # pw32 DLLs use 'pw' prefix rather than 'lib' - library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' - ;; - esac - dynamic_linker='Win32 ld.exe' - ;; - - *,cl*) - # Native MSVC - libname_spec='$name' - soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' - library_names_spec='${libname}.dll.lib' - - case $build_os in - mingw*) - sys_lib_search_path_spec= - lt_save_ifs=$IFS - IFS=';' - for lt_path in $LIB - do - IFS=$lt_save_ifs - # Let DOS variable expansion print the short 8.3 style file name. - lt_path=`cd "$lt_path" 2>/dev/null && cmd //C "for %i in (".") do @echo %~si"` - sys_lib_search_path_spec="$sys_lib_search_path_spec $lt_path" - done - IFS=$lt_save_ifs - # Convert to MSYS style. - sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | sed -e 's|\\\\|/|g' -e 's| \\([[a-zA-Z]]\\):| /\\1|g' -e 's|^ ||'` - ;; - cygwin*) - # Convert to unix form, then to dos form, then back to unix form - # but this time dos style (no spaces!) so that the unix form looks - # like /cygdrive/c/PROGRA~1:/cygdr... - sys_lib_search_path_spec=`cygpath --path --unix "$LIB"` - sys_lib_search_path_spec=`cygpath --path --dos "$sys_lib_search_path_spec" 2>/dev/null` - sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` - ;; - *) - sys_lib_search_path_spec="$LIB" - if $ECHO "$sys_lib_search_path_spec" | [$GREP ';[c-zC-Z]:/' >/dev/null]; then - # It is most probably a Windows format PATH. - sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` - else - sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` - fi - # FIXME: find the short name or the path components, as spaces are - # common. (e.g. "Program Files" -> "PROGRA~1") - ;; - esac - - # DLL is installed to $(libdir)/../bin by postinstall_cmds - postinstall_cmds='base_file=`basename \${file}`~ - dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~ - dldir=$destdir/`dirname \$dlpath`~ - test -d \$dldir || mkdir -p \$dldir~ - $install_prog $dir/$dlname \$dldir/$dlname' - postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ - dlpath=$dir/\$dldll~ - $RM \$dlpath' - shlibpath_overrides_runpath=yes - dynamic_linker='Win32 link.exe' - ;; - - *) - # Assume MSVC wrapper - library_names_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext} $libname.lib' - dynamic_linker='Win32 ld.exe' - ;; - esac - # FIXME: first we should search . and the directory the executable is in - shlibpath_var=PATH - ;; - -darwin* | rhapsody*) - dynamic_linker="$host_os dyld" - version_type=darwin - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext' - soname_spec='${libname}${release}${major}$shared_ext' - shlibpath_overrides_runpath=yes - shlibpath_var=DYLD_LIBRARY_PATH - shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`' -m4_if([$1], [],[ - sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib"]) - sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib' - ;; - -dgux*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - ;; - -freebsd1*) - dynamic_linker=no - ;; - -freebsd* | dragonfly*) - # DragonFly does not have aout. When/if they implement a new - # versioning mechanism, adjust this. - if test -x /usr/bin/objformat; then - objformat=`/usr/bin/objformat` - else - case $host_os in - freebsd[[123]]*) objformat=aout ;; - *) objformat=elf ;; - esac - fi - version_type=freebsd-$objformat - case $version_type in - freebsd-elf*) - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' - need_version=no - need_lib_prefix=no - ;; - freebsd-*) - library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix' - need_version=yes - ;; - esac - shlibpath_var=LD_LIBRARY_PATH - case $host_os in - freebsd2*) - shlibpath_overrides_runpath=yes - ;; - freebsd3.[[01]]* | freebsdelf3.[[01]]*) - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - ;; - freebsd3.[[2-9]]* | freebsdelf3.[[2-9]]* | \ - freebsd4.[[0-5]] | freebsdelf4.[[0-5]] | freebsd4.1.1 | freebsdelf4.1.1) - shlibpath_overrides_runpath=no - hardcode_into_libs=yes - ;; - *) # from 4.6 on, and DragonFly - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - ;; - esac - ;; - -gnu*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no - hardcode_into_libs=yes - ;; - -haiku*) - version_type=linux - need_lib_prefix=no - need_version=no - dynamic_linker="$host_os runtime_loader" - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LIBRARY_PATH - shlibpath_overrides_runpath=yes - sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib' - hardcode_into_libs=yes - ;; - -hpux9* | hpux10* | hpux11*) - # Give a soname corresponding to the major version so that dld.sl refuses to - # link against other versions. - version_type=sunos - need_lib_prefix=no - need_version=no - case $host_cpu in - ia64*) - shrext_cmds='.so' - hardcode_into_libs=yes - dynamic_linker="$host_os dld.so" - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - if test "X$HPUX_IA64_MODE" = X32; then - sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib" - else - sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64" - fi - sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec - ;; - hppa*64*) - shrext_cmds='.sl' - hardcode_into_libs=yes - dynamic_linker="$host_os dld.sl" - shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH - shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64" - sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec - ;; - *) - shrext_cmds='.sl' - dynamic_linker="$host_os dld.sl" - shlibpath_var=SHLIB_PATH - shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - ;; - esac - # HP-UX runs *really* slowly unless shared libraries are mode 555, ... - postinstall_cmds='chmod 555 $lib' - # or fails outright, so override atomically: - install_override_mode=555 - ;; - -interix[[3-9]]*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no - hardcode_into_libs=yes - ;; - -irix5* | irix6* | nonstopux*) - case $host_os in - nonstopux*) version_type=nonstopux ;; - *) - if test "$lt_cv_prog_gnu_ld" = yes; then - version_type=linux - else - version_type=irix - fi ;; - esac - need_lib_prefix=no - need_version=no - soname_spec='${libname}${release}${shared_ext}$major' - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}' - case $host_os in - irix5* | nonstopux*) - libsuff= shlibsuff= - ;; - *) - case $LD in # libtool.m4 will add one of these switches to LD - *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") - libsuff= shlibsuff= libmagic=32-bit;; - *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") - libsuff=32 shlibsuff=N32 libmagic=N32;; - *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") - libsuff=64 shlibsuff=64 libmagic=64-bit;; - *) libsuff= shlibsuff= libmagic=never-match;; - esac - ;; - esac - shlibpath_var=LD_LIBRARY${shlibsuff}_PATH - shlibpath_overrides_runpath=no - sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" - sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" - hardcode_into_libs=yes - ;; - -# No shared lib support for Linux oldld, aout, or coff. -linux*oldld* | linux*aout* | linux*coff*) - dynamic_linker=no - ;; - -# This must be Linux ELF. -linux* | k*bsd*-gnu | kopensolaris*-gnu) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no - - # Some binutils ld are patched to set DT_RUNPATH - AC_CACHE_VAL([lt_cv_shlibpath_overrides_runpath], - [lt_cv_shlibpath_overrides_runpath=no - save_LDFLAGS=$LDFLAGS - save_libdir=$libdir - eval "libdir=/foo; wl=\"$_LT_TAGVAR(lt_prog_compiler_wl, $1)\"; \ - LDFLAGS=\"\$LDFLAGS $_LT_TAGVAR(hardcode_libdir_flag_spec, $1)\"" - AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])], - [AS_IF([ ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null], - [lt_cv_shlibpath_overrides_runpath=yes])]) - LDFLAGS=$save_LDFLAGS - libdir=$save_libdir - ]) - shlibpath_overrides_runpath=$lt_cv_shlibpath_overrides_runpath - - # This implies no fast_install, which is unacceptable. - # Some rework will be needed to allow for fast_install - # before this can be enabled. - hardcode_into_libs=yes - - # Append ld.so.conf contents to the search path - if test -f /etc/ld.so.conf; then - lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '` - sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra" - fi - - # We used to test for /lib/ld.so.1 and disable shared libraries on - # powerpc, because MkLinux only supported shared libraries with the - # GNU dynamic linker. Since this was broken with cross compilers, - # most powerpc-linux boxes support dynamic linking these days and - # people can always --disable-shared, the test was removed, and we - # assume the GNU/Linux dynamic linker is in use. - dynamic_linker='GNU/Linux ld.so' - ;; - -netbsdelf*-gnu) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no - hardcode_into_libs=yes - dynamic_linker='NetBSD ld.elf_so' - ;; - -netbsd*) - version_type=sunos - need_lib_prefix=no - need_version=no - if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' - finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' - dynamic_linker='NetBSD (a.out) ld.so' - else - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - dynamic_linker='NetBSD ld.elf_so' - fi - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - ;; - -newsos6) - version_type=linux - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - ;; - -*nto* | *qnx*) - version_type=qnx - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no - hardcode_into_libs=yes - dynamic_linker='ldqnx.so' - ;; - -openbsd*) - version_type=sunos - sys_lib_dlsearch_path_spec="/usr/lib" - need_lib_prefix=no - # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs. - case $host_os in - openbsd3.3 | openbsd3.3.*) need_version=yes ;; - *) need_version=no ;; - esac - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' - finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' - shlibpath_var=LD_LIBRARY_PATH - if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then - case $host_os in - openbsd2.[[89]] | openbsd2.[[89]].*) - shlibpath_overrides_runpath=no - ;; - *) - shlibpath_overrides_runpath=yes - ;; - esac - else - shlibpath_overrides_runpath=yes - fi - ;; - -os2*) - libname_spec='$name' - shrext_cmds=".dll" - need_lib_prefix=no - library_names_spec='$libname${shared_ext} $libname.a' - dynamic_linker='OS/2 ld.exe' - shlibpath_var=LIBPATH - ;; - -osf3* | osf4* | osf5*) - version_type=osf - need_lib_prefix=no - need_version=no - soname_spec='${libname}${release}${shared_ext}$major' - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - shlibpath_var=LD_LIBRARY_PATH - sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" - sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" - ;; - -rdos*) - dynamic_linker=no - ;; - -solaris*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - # ldd complains unless libraries are executable - postinstall_cmds='chmod +x $lib' - ;; - -sunos4*) - version_type=sunos - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' - finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - if test "$with_gnu_ld" = yes; then - need_lib_prefix=no - fi - need_version=yes - ;; - -sysv4 | sysv4.3*) - version_type=linux - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - case $host_vendor in - sni) - shlibpath_overrides_runpath=no - need_lib_prefix=no - runpath_var=LD_RUN_PATH - ;; - siemens) - need_lib_prefix=no - ;; - motorola) - need_lib_prefix=no - need_version=no - shlibpath_overrides_runpath=no - sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' - ;; - esac - ;; - -sysv4*MP*) - if test -d /usr/nec ;then - version_type=linux - library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}' - soname_spec='$libname${shared_ext}.$major' - shlibpath_var=LD_LIBRARY_PATH - fi - ;; - -sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) - version_type=freebsd-elf - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - if test "$with_gnu_ld" = yes; then - sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib' - else - sys_lib_search_path_spec='/usr/ccs/lib /usr/lib' - case $host_os in - sco3.2v5*) - sys_lib_search_path_spec="$sys_lib_search_path_spec /lib" - ;; - esac - fi - sys_lib_dlsearch_path_spec='/usr/lib' - ;; - -tpf*) - # TPF is a cross-target only. Preferred cross-host = GNU/Linux. - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no - hardcode_into_libs=yes - ;; - -uts4*) - version_type=linux - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - ;; - -*) - dynamic_linker=no - ;; -esac -AC_MSG_RESULT([$dynamic_linker]) -test "$dynamic_linker" = no && can_build_shared=no - -variables_saved_for_relink="PATH $shlibpath_var $runpath_var" -if test "$GCC" = yes; then - variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" -fi - -if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then - sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec" -fi -if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then - sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec" -fi - -_LT_DECL([], [variables_saved_for_relink], [1], - [Variables whose values should be saved in libtool wrapper scripts and - restored at link time]) -_LT_DECL([], [need_lib_prefix], [0], - [Do we need the "lib" prefix for modules?]) -_LT_DECL([], [need_version], [0], [Do we need a version for libraries?]) -_LT_DECL([], [version_type], [0], [Library versioning type]) -_LT_DECL([], [runpath_var], [0], [Shared library runtime path variable]) -_LT_DECL([], [shlibpath_var], [0],[Shared library path variable]) -_LT_DECL([], [shlibpath_overrides_runpath], [0], - [Is shlibpath searched before the hard-coded library search path?]) -_LT_DECL([], [libname_spec], [1], [Format of library name prefix]) -_LT_DECL([], [library_names_spec], [1], - [[List of archive names. First name is the real one, the rest are links. - The last name is the one that the linker finds with -lNAME]]) -_LT_DECL([], [soname_spec], [1], - [[The coded name of the library, if different from the real name]]) -_LT_DECL([], [install_override_mode], [1], - [Permission mode override for installation of shared libraries]) -_LT_DECL([], [postinstall_cmds], [2], - [Command to use after installation of a shared archive]) -_LT_DECL([], [postuninstall_cmds], [2], - [Command to use after uninstallation of a shared archive]) -_LT_DECL([], [finish_cmds], [2], - [Commands used to finish a libtool library installation in a directory]) -_LT_DECL([], [finish_eval], [1], - [[As "finish_cmds", except a single script fragment to be evaled but - not shown]]) -_LT_DECL([], [hardcode_into_libs], [0], - [Whether we should hardcode library paths into libraries]) -_LT_DECL([], [sys_lib_search_path_spec], [2], - [Compile-time system search path for libraries]) -_LT_DECL([], [sys_lib_dlsearch_path_spec], [2], - [Run-time system search path for libraries]) -])# _LT_SYS_DYNAMIC_LINKER - - -# _LT_PATH_TOOL_PREFIX(TOOL) -# -------------------------- -# find a file program which can recognize shared library -AC_DEFUN([_LT_PATH_TOOL_PREFIX], -[m4_require([_LT_DECL_EGREP])dnl -AC_MSG_CHECKING([for $1]) -AC_CACHE_VAL(lt_cv_path_MAGIC_CMD, -[case $MAGIC_CMD in -[[\\/*] | ?:[\\/]*]) - lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. - ;; -*) - lt_save_MAGIC_CMD="$MAGIC_CMD" - lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR -dnl $ac_dummy forces splitting on constant user-supplied paths. -dnl POSIX.2 word splitting is done only on the output of word expansions, -dnl not every word. This closes a longstanding sh security hole. - ac_dummy="m4_if([$2], , $PATH, [$2])" - for ac_dir in $ac_dummy; do - IFS="$lt_save_ifs" - test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/$1; then - lt_cv_path_MAGIC_CMD="$ac_dir/$1" - if test -n "$file_magic_test_file"; then - case $deplibs_check_method in - "file_magic "*) - file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"` - MAGIC_CMD="$lt_cv_path_MAGIC_CMD" - if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | - $EGREP "$file_magic_regex" > /dev/null; then - : - else - cat <<_LT_EOF 1>&2 - -*** Warning: the command libtool uses to detect shared libraries, -*** $file_magic_cmd, produces output that libtool cannot recognize. -*** The result is that libtool may fail to recognize shared libraries -*** as such. This will affect the creation of libtool libraries that -*** depend on shared libraries, but programs linked with such libtool -*** libraries will work regardless of this problem. Nevertheless, you -*** may want to report the problem to your system manager and/or to -*** bug-libtool@gnu.org - -_LT_EOF - fi ;; - esac - fi - break - fi - done - IFS="$lt_save_ifs" - MAGIC_CMD="$lt_save_MAGIC_CMD" - ;; -esac]) -MAGIC_CMD="$lt_cv_path_MAGIC_CMD" -if test -n "$MAGIC_CMD"; then - AC_MSG_RESULT($MAGIC_CMD) -else - AC_MSG_RESULT(no) -fi -_LT_DECL([], [MAGIC_CMD], [0], - [Used to examine libraries when file_magic_cmd begins with "file"])dnl -])# _LT_PATH_TOOL_PREFIX - -# Old name: -AU_ALIAS([AC_PATH_TOOL_PREFIX], [_LT_PATH_TOOL_PREFIX]) -dnl aclocal-1.4 backwards compatibility: -dnl AC_DEFUN([AC_PATH_TOOL_PREFIX], []) - - -# _LT_PATH_MAGIC -# -------------- -# find a file program which can recognize a shared library -m4_defun([_LT_PATH_MAGIC], -[_LT_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin$PATH_SEPARATOR$PATH) -if test -z "$lt_cv_path_MAGIC_CMD"; then - if test -n "$ac_tool_prefix"; then - _LT_PATH_TOOL_PREFIX(file, /usr/bin$PATH_SEPARATOR$PATH) - else - MAGIC_CMD=: - fi -fi -])# _LT_PATH_MAGIC - - -# LT_PATH_LD -# ---------- -# find the pathname to the GNU or non-GNU linker -AC_DEFUN([LT_PATH_LD], -[AC_REQUIRE([AC_PROG_CC])dnl -AC_REQUIRE([AC_CANONICAL_HOST])dnl -AC_REQUIRE([AC_CANONICAL_BUILD])dnl -m4_require([_LT_DECL_SED])dnl -m4_require([_LT_DECL_EGREP])dnl -m4_require([_LT_PROG_ECHO_BACKSLASH])dnl - -AC_ARG_WITH([gnu-ld], - [AS_HELP_STRING([--with-gnu-ld], - [assume the C compiler uses GNU ld @<:@default=no@:>@])], - [test "$withval" = no || with_gnu_ld=yes], - [with_gnu_ld=no])dnl - -ac_prog=ld -if test "$GCC" = yes; then - # Check if gcc -print-prog-name=ld gives a path. - AC_MSG_CHECKING([for ld used by $CC]) - case $host in - *-*-mingw*) - # gcc leaves a trailing carriage return which upsets mingw - ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; - *) - ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; - esac - case $ac_prog in - # Accept absolute paths. - [[\\/]]* | ?:[[\\/]]*) - re_direlt='/[[^/]][[^/]]*/\.\./' - # Canonicalize the pathname of ld - ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'` - while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do - ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"` - done - test -z "$LD" && LD="$ac_prog" - ;; - "") - # If it fails, then pretend we aren't using GCC. - ac_prog=ld - ;; - *) - # If it is relative, then search for the first ld in PATH. - with_gnu_ld=unknown - ;; - esac -elif test "$with_gnu_ld" = yes; then - AC_MSG_CHECKING([for GNU ld]) -else - AC_MSG_CHECKING([for non-GNU ld]) -fi -AC_CACHE_VAL(lt_cv_path_LD, -[if test -z "$LD"; then - lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR - for ac_dir in $PATH; do - IFS="$lt_save_ifs" - test -z "$ac_dir" && ac_dir=. - if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then - lt_cv_path_LD="$ac_dir/$ac_prog" - # Check to see if the program is GNU ld. I'd rather use --version, - # but apparently some variants of GNU ld only accept -v. - # Break only if it was the GNU/non-GNU ld that we prefer. - case `"$lt_cv_path_LD" -v 2>&1 &1 /dev/null 2>&1; then - lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' - lt_cv_file_magic_cmd='func_win32_libid' - else - # Keep this pattern in sync with the one in func_win32_libid. - lt_cv_deplibs_check_method='file_magic file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)' - lt_cv_file_magic_cmd='$OBJDUMP -f' - fi - ;; - -cegcc*) - # use the weaker test based on 'objdump'. See mingw*. - lt_cv_deplibs_check_method='file_magic file format pe-arm-.*little(.*architecture: arm)?' - lt_cv_file_magic_cmd='$OBJDUMP -f' - ;; - -darwin* | rhapsody*) - lt_cv_deplibs_check_method=pass_all - ;; - -freebsd* | dragonfly*) - if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then - case $host_cpu in - i*86 ) - # Not sure whether the presence of OpenBSD here was a mistake. - # Let's accept both of them until this is cleared up. - lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[[3-9]]86 (compact )?demand paged shared library' - lt_cv_file_magic_cmd=/usr/bin/file - lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` - ;; - esac - else - lt_cv_deplibs_check_method=pass_all - fi - ;; - -gnu*) - lt_cv_deplibs_check_method=pass_all - ;; - -haiku*) - lt_cv_deplibs_check_method=pass_all - ;; - -hpux10.20* | hpux11*) - lt_cv_file_magic_cmd=/usr/bin/file - case $host_cpu in - ia64*) - lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|ELF-[[0-9]][[0-9]]) shared object file - IA64' - lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so - ;; - hppa*64*) - [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF[ -][0-9][0-9])(-bit)?( [LM]SB)? shared object( file)?[, -]* PA-RISC [0-9]\.[0-9]'] - lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl - ;; - *) - lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|PA-RISC[[0-9]]\.[[0-9]]) shared library' - lt_cv_file_magic_test_file=/usr/lib/libc.sl - ;; - esac - ;; - -interix[[3-9]]*) - # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here - lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|\.a)$' - ;; - -irix5* | irix6* | nonstopux*) - case $LD in - *-32|*"-32 ") libmagic=32-bit;; - *-n32|*"-n32 ") libmagic=N32;; - *-64|*"-64 ") libmagic=64-bit;; - *) libmagic=never-match;; - esac - lt_cv_deplibs_check_method=pass_all - ;; - -# This must be Linux ELF. -linux* | k*bsd*-gnu | kopensolaris*-gnu) - lt_cv_deplibs_check_method=pass_all - ;; - -netbsd* | netbsdelf*-gnu) - if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then - lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$' - else - lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|_pic\.a)$' - fi - ;; - -newos6*) - lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (executable|dynamic lib)' - lt_cv_file_magic_cmd=/usr/bin/file - lt_cv_file_magic_test_file=/usr/lib/libnls.so - ;; - -*nto* | *qnx*) - lt_cv_deplibs_check_method=pass_all - ;; - -openbsd*) - if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then - lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|\.so|_pic\.a)$' - else - lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$' - fi - ;; - -osf3* | osf4* | osf5*) - lt_cv_deplibs_check_method=pass_all - ;; - -rdos*) - lt_cv_deplibs_check_method=pass_all - ;; - -solaris*) - lt_cv_deplibs_check_method=pass_all - ;; - -sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) - lt_cv_deplibs_check_method=pass_all - ;; - -sysv4 | sysv4.3*) - case $host_vendor in - motorola) - lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib) M[[0-9]][[0-9]]* Version [[0-9]]' - lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*` - ;; - ncr) - lt_cv_deplibs_check_method=pass_all - ;; - sequent) - lt_cv_file_magic_cmd='/bin/file' - lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )' - ;; - sni) - lt_cv_file_magic_cmd='/bin/file' - lt_cv_deplibs_check_method="file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB dynamic lib" - lt_cv_file_magic_test_file=/lib/libc.so - ;; - siemens) - lt_cv_deplibs_check_method=pass_all - ;; - pc) - lt_cv_deplibs_check_method=pass_all - ;; - esac - ;; - -tpf*) - lt_cv_deplibs_check_method=pass_all - ;; -esac -]) - -file_magic_glob= -want_nocaseglob=no -if test "$build" = "$host"; then - case $host_os in - mingw* | pw32*) - if ( shopt | grep nocaseglob ) >/dev/null 2>&1; then - want_nocaseglob=yes - else - file_magic_glob=`echo aAbBcCdDeEfFgGhHiIjJkKlLmMnNoOpPqQrRsStTuUvVwWxXyYzZ | $SED -e "s/\(..\)/s\/[[\1]]\/[[\1]]\/g;/g"` - fi - ;; - esac -fi - -file_magic_cmd=$lt_cv_file_magic_cmd -deplibs_check_method=$lt_cv_deplibs_check_method -test -z "$deplibs_check_method" && deplibs_check_method=unknown - -_LT_DECL([], [deplibs_check_method], [1], - [Method to check whether dependent libraries are shared objects]) -_LT_DECL([], [file_magic_cmd], [1], - [Command to use when deplibs_check_method = "file_magic"]) -_LT_DECL([], [file_magic_glob], [1], - [How to find potential files when deplibs_check_method = "file_magic"]) -_LT_DECL([], [want_nocaseglob], [1], - [Find potential files using nocaseglob when deplibs_check_method = "file_magic"]) -])# _LT_CHECK_MAGIC_METHOD - - -# LT_PATH_NM -# ---------- -# find the pathname to a BSD- or MS-compatible name lister -AC_DEFUN([LT_PATH_NM], -[AC_REQUIRE([AC_PROG_CC])dnl -AC_CACHE_CHECK([for BSD- or MS-compatible name lister (nm)], lt_cv_path_NM, -[if test -n "$NM"; then - # Let the user override the test. - lt_cv_path_NM="$NM" -else - lt_nm_to_check="${ac_tool_prefix}nm" - if test -n "$ac_tool_prefix" && test "$build" = "$host"; then - lt_nm_to_check="$lt_nm_to_check nm" - fi - for lt_tmp_nm in $lt_nm_to_check; do - lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR - for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do - IFS="$lt_save_ifs" - test -z "$ac_dir" && ac_dir=. - tmp_nm="$ac_dir/$lt_tmp_nm" - if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then - # Check to see if the nm accepts a BSD-compat flag. - # Adding the `sed 1q' prevents false positives on HP-UX, which says: - # nm: unknown option "B" ignored - # Tru64's nm complains that /dev/null is an invalid object file - case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in - */dev/null* | *'Invalid file or object type'*) - lt_cv_path_NM="$tmp_nm -B" - break - ;; - *) - case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in - */dev/null*) - lt_cv_path_NM="$tmp_nm -p" - break - ;; - *) - lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but - continue # so that we can try to find one that supports BSD flags - ;; - esac - ;; - esac - fi - done - IFS="$lt_save_ifs" - done - : ${lt_cv_path_NM=no} -fi]) -if test "$lt_cv_path_NM" != "no"; then - NM="$lt_cv_path_NM" -else - # Didn't find any BSD compatible name lister, look for dumpbin. - if test -n "$DUMPBIN"; then : - # Let the user override the test. - else - AC_CHECK_TOOLS(DUMPBIN, [dumpbin "link -dump"], :) - case `$DUMPBIN -symbols /dev/null 2>&1 | sed '1q'` in - *COFF*) - DUMPBIN="$DUMPBIN -symbols" - ;; - *) - DUMPBIN=: - ;; - esac - fi - AC_SUBST([DUMPBIN]) - if test "$DUMPBIN" != ":"; then - NM="$DUMPBIN" - fi -fi -test -z "$NM" && NM=nm -AC_SUBST([NM]) -_LT_DECL([], [NM], [1], [A BSD- or MS-compatible name lister])dnl - -AC_CACHE_CHECK([the name lister ($NM) interface], [lt_cv_nm_interface], - [lt_cv_nm_interface="BSD nm" - echo "int some_variable = 0;" > conftest.$ac_ext - (eval echo "\"\$as_me:$LINENO: $ac_compile\"" >&AS_MESSAGE_LOG_FD) - (eval "$ac_compile" 2>conftest.err) - cat conftest.err >&AS_MESSAGE_LOG_FD - (eval echo "\"\$as_me:$LINENO: $NM \\\"conftest.$ac_objext\\\"\"" >&AS_MESSAGE_LOG_FD) - (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out) - cat conftest.err >&AS_MESSAGE_LOG_FD - (eval echo "\"\$as_me:$LINENO: output\"" >&AS_MESSAGE_LOG_FD) - cat conftest.out >&AS_MESSAGE_LOG_FD - if $GREP 'External.*some_variable' conftest.out > /dev/null; then - lt_cv_nm_interface="MS dumpbin" - fi - rm -f conftest*]) -])# LT_PATH_NM - -# Old names: -AU_ALIAS([AM_PROG_NM], [LT_PATH_NM]) -AU_ALIAS([AC_PROG_NM], [LT_PATH_NM]) -dnl aclocal-1.4 backwards compatibility: -dnl AC_DEFUN([AM_PROG_NM], []) -dnl AC_DEFUN([AC_PROG_NM], []) - -# _LT_CHECK_SHAREDLIB_FROM_LINKLIB -# -------------------------------- -# how to determine the name of the shared library -# associated with a specific link library. -# -- PORTME fill in with the dynamic library characteristics -m4_defun([_LT_CHECK_SHAREDLIB_FROM_LINKLIB], -[m4_require([_LT_DECL_EGREP]) -m4_require([_LT_DECL_OBJDUMP]) -m4_require([_LT_DECL_DLLTOOL]) -AC_CACHE_CHECK([how to associate runtime and link libraries], -lt_cv_sharedlib_from_linklib_cmd, -[lt_cv_sharedlib_from_linklib_cmd='unknown' - -case $host_os in -cygwin* | mingw* | pw32* | cegcc*) - # two different shell functions defined in ltmain.sh - # decide which to use based on capabilities of $DLLTOOL - case `$DLLTOOL --help 2>&1` in - *--identify-strict*) - lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib - ;; - *) - lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib_fallback - ;; - esac - ;; -*) - # fallback: assume linklib IS sharedlib - lt_cv_sharedlib_from_linklib_cmd="$ECHO" - ;; -esac -]) -sharedlib_from_linklib_cmd=$lt_cv_sharedlib_from_linklib_cmd -test -z "$sharedlib_from_linklib_cmd" && sharedlib_from_linklib_cmd=$ECHO - -_LT_DECL([], [sharedlib_from_linklib_cmd], [1], - [Command to associate shared and link libraries]) -])# _LT_CHECK_SHAREDLIB_FROM_LINKLIB - - -# _LT_PATH_MANIFEST_TOOL -# ---------------------- -# locate the manifest tool -m4_defun([_LT_PATH_MANIFEST_TOOL], -[AC_CHECK_TOOL(MANIFEST_TOOL, mt, :) -test -z "$MANIFEST_TOOL" && MANIFEST_TOOL=mt -AC_CACHE_CHECK([if $MANIFEST_TOOL is a manifest tool], [lt_cv_path_mainfest_tool], - [lt_cv_path_mainfest_tool=no - echo "$as_me:$LINENO: $MANIFEST_TOOL '-?'" >&AS_MESSAGE_LOG_FD - $MANIFEST_TOOL '-?' 2>conftest.err > conftest.out - cat conftest.err >&AS_MESSAGE_LOG_FD - if $GREP 'Manifest Tool' conftest.out > /dev/null; then - lt_cv_path_mainfest_tool=yes - fi - rm -f conftest*]) -if test "x$lt_cv_path_mainfest_tool" != xyes; then - MANIFEST_TOOL=: -fi -_LT_DECL([], [MANIFEST_TOOL], [1], [Manifest tool])dnl -])# _LT_PATH_MANIFEST_TOOL - - -# LT_LIB_M -# -------- -# check for math library -AC_DEFUN([LT_LIB_M], -[AC_REQUIRE([AC_CANONICAL_HOST])dnl -LIBM= -case $host in -*-*-beos* | *-*-cegcc* | *-*-cygwin* | *-*-haiku* | *-*-pw32* | *-*-darwin*) - # These system don't have libm, or don't need it - ;; -*-ncr-sysv4.3*) - AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw") - AC_CHECK_LIB(m, cos, LIBM="$LIBM -lm") - ;; -*) - AC_CHECK_LIB(m, cos, LIBM="-lm") - ;; -esac -AC_SUBST([LIBM]) -])# LT_LIB_M - -# Old name: -AU_ALIAS([AC_CHECK_LIBM], [LT_LIB_M]) -dnl aclocal-1.4 backwards compatibility: -dnl AC_DEFUN([AC_CHECK_LIBM], []) - - -# _LT_COMPILER_NO_RTTI([TAGNAME]) -# ------------------------------- -m4_defun([_LT_COMPILER_NO_RTTI], -[m4_require([_LT_TAG_COMPILER])dnl - -_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)= - -if test "$GCC" = yes; then - case $cc_basename in - nvcc*) - _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -Xcompiler -fno-builtin' ;; - *) - _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin' ;; - esac - - _LT_COMPILER_OPTION([if $compiler supports -fno-rtti -fno-exceptions], - lt_cv_prog_compiler_rtti_exceptions, - [-fno-rtti -fno-exceptions], [], - [_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)="$_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) -fno-rtti -fno-exceptions"]) -fi -_LT_TAGDECL([no_builtin_flag], [lt_prog_compiler_no_builtin_flag], [1], - [Compiler flag to turn off builtin functions]) -])# _LT_COMPILER_NO_RTTI - - -# _LT_CMD_GLOBAL_SYMBOLS -# ---------------------- -m4_defun([_LT_CMD_GLOBAL_SYMBOLS], -[AC_REQUIRE([AC_CANONICAL_HOST])dnl -AC_REQUIRE([AC_PROG_CC])dnl -AC_REQUIRE([AC_PROG_AWK])dnl -AC_REQUIRE([LT_PATH_NM])dnl -AC_REQUIRE([LT_PATH_LD])dnl -m4_require([_LT_DECL_SED])dnl -m4_require([_LT_DECL_EGREP])dnl -m4_require([_LT_TAG_COMPILER])dnl - -# Check for command to grab the raw symbol name followed by C symbol from nm. -AC_MSG_CHECKING([command to parse $NM output from $compiler object]) -AC_CACHE_VAL([lt_cv_sys_global_symbol_pipe], -[ -# These are sane defaults that work on at least a few old systems. -# [They come from Ultrix. What could be older than Ultrix?!! ;)] - -# Character class describing NM global symbol codes. -symcode='[[BCDEGRST]]' - -# Regexp to match symbols that can be accessed directly from C. -sympat='\([[_A-Za-z]][[_A-Za-z0-9]]*\)' - -# Define system-specific variables. -case $host_os in -aix*) - symcode='[[BCDT]]' - ;; -cygwin* | mingw* | pw32* | cegcc*) - symcode='[[ABCDGISTW]]' - ;; -hpux*) - if test "$host_cpu" = ia64; then - symcode='[[ABCDEGRST]]' - fi - ;; -irix* | nonstopux*) - symcode='[[BCDEGRST]]' - ;; -osf*) - symcode='[[BCDEGQRST]]' - ;; -solaris*) - symcode='[[BDRT]]' - ;; -sco3.2v5*) - symcode='[[DT]]' - ;; -sysv4.2uw2*) - symcode='[[DT]]' - ;; -sysv5* | sco5v6* | unixware* | OpenUNIX*) - symcode='[[ABDT]]' - ;; -sysv4) - symcode='[[DFNSTU]]' - ;; -esac - -# If we're using GNU nm, then use its standard symbol codes. -case `$NM -V 2>&1` in -*GNU* | *'with BFD'*) - symcode='[[ABCDGIRSTW]]' ;; -esac - -# Transform an extracted symbol line into a proper C declaration. -# Some systems (esp. on ia64) link data and code symbols differently, -# so use this general approach. -lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" - -# Transform an extracted symbol line into symbol name and symbol address -lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\)[[ ]]*$/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (void *) \&\2},/p'" -lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([[^ ]]*\)[[ ]]*$/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \(lib[[^ ]]*\)$/ {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"lib\2\", (void *) \&\2},/p'" - -# Handle CRLF in mingw tool chain -opt_cr= -case $build_os in -mingw*) - opt_cr=`$ECHO 'x\{0,1\}' | tr x '\015'` # option cr in regexp - ;; -esac - -# Try without a prefix underscore, then with it. -for ac_symprfx in "" "_"; do - - # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol. - symxfrm="\\1 $ac_symprfx\\2 \\2" - - # Write the raw and C identifiers. - if test "$lt_cv_nm_interface" = "MS dumpbin"; then - # Fake it for dumpbin and say T for any non-static function - # and D for any global variable. - # Also find C++ and __fastcall symbols from MSVC++, - # which start with @ or ?. - lt_cv_sys_global_symbol_pipe="$AWK ['"\ -" {last_section=section; section=\$ 3};"\ -" /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\ -" \$ 0!~/External *\|/{next};"\ -" / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\ -" {if(hide[section]) next};"\ -" {f=0}; \$ 0~/\(\).*\|/{f=1}; {printf f ? \"T \" : \"D \"};"\ -" {split(\$ 0, a, /\||\r/); split(a[2], s)};"\ -" s[1]~/^[@?]/{print s[1], s[1]; next};"\ -" s[1]~prfx {split(s[1],t,\"@\"); print t[1], substr(t[1],length(prfx))}"\ -" ' prfx=^$ac_symprfx]" - else - lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[ ]]\($symcode$symcode*\)[[ ]][[ ]]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'" - fi - lt_cv_sys_global_symbol_pipe="$lt_cv_sys_global_symbol_pipe | sed '/ __gnu_lto/d'" - - # Check to see that the pipe works correctly. - pipe_works=no - - rm -f conftest* - cat > conftest.$ac_ext <<_LT_EOF -#ifdef __cplusplus -extern "C" { -#endif -char nm_test_var; -void nm_test_func(void); -void nm_test_func(void){} -#ifdef __cplusplus -} -#endif -int main(){nm_test_var='a';nm_test_func();return(0);} -_LT_EOF - - if AC_TRY_EVAL(ac_compile); then - # Now try to grab the symbols. - nlist=conftest.nm - if AC_TRY_EVAL(NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist) && test -s "$nlist"; then - # Try sorting and uniquifying the output. - if sort "$nlist" | uniq > "$nlist"T; then - mv -f "$nlist"T "$nlist" - else - rm -f "$nlist"T - fi - - # Make sure that we snagged all the symbols we need. - if $GREP ' nm_test_var$' "$nlist" >/dev/null; then - if $GREP ' nm_test_func$' "$nlist" >/dev/null; then - cat <<_LT_EOF > conftest.$ac_ext -/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests. */ -#if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE) -/* DATA imports from DLLs on WIN32 con't be const, because runtime - relocations are performed -- see ld's documentation on pseudo-relocs. */ -# define LT@&t@_DLSYM_CONST -#elif defined(__osf__) -/* This system does not cope well with relocations in const data. */ -# define LT@&t@_DLSYM_CONST -#else -# define LT@&t@_DLSYM_CONST const -#endif - -#ifdef __cplusplus -extern "C" { -#endif - -_LT_EOF - # Now generate the symbol file. - eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | $GREP -v main >> conftest.$ac_ext' - - cat <<_LT_EOF >> conftest.$ac_ext - -/* The mapping between symbol names and symbols. */ -LT@&t@_DLSYM_CONST struct { - const char *name; - void *address; -} -lt__PROGRAM__LTX_preloaded_symbols[[]] = -{ - { "@PROGRAM@", (void *) 0 }, -_LT_EOF - $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (void *) \&\2},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext - cat <<\_LT_EOF >> conftest.$ac_ext - {0, (void *) 0} -}; - -/* This works around a problem in FreeBSD linker */ -#ifdef FREEBSD_WORKAROUND -static const void *lt_preloaded_setup() { - return lt__PROGRAM__LTX_preloaded_symbols; -} -#endif - -#ifdef __cplusplus -} -#endif -_LT_EOF - # Now try linking the two files. - mv conftest.$ac_objext conftstm.$ac_objext - lt_globsym_save_LIBS=$LIBS - lt_globsym_save_CFLAGS=$CFLAGS - LIBS="conftstm.$ac_objext" - CFLAGS="$CFLAGS$_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)" - if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext}; then - pipe_works=yes - fi - LIBS=$lt_globsym_save_LIBS - CFLAGS=$lt_globsym_save_CFLAGS - else - echo "cannot find nm_test_func in $nlist" >&AS_MESSAGE_LOG_FD - fi - else - echo "cannot find nm_test_var in $nlist" >&AS_MESSAGE_LOG_FD - fi - else - echo "cannot run $lt_cv_sys_global_symbol_pipe" >&AS_MESSAGE_LOG_FD - fi - else - echo "$progname: failed program was:" >&AS_MESSAGE_LOG_FD - cat conftest.$ac_ext >&5 - fi - rm -rf conftest* conftst* - - # Do not use the global_symbol_pipe unless it works. - if test "$pipe_works" = yes; then - break - else - lt_cv_sys_global_symbol_pipe= - fi -done -]) -if test -z "$lt_cv_sys_global_symbol_pipe"; then - lt_cv_sys_global_symbol_to_cdecl= -fi -if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then - AC_MSG_RESULT(failed) -else - AC_MSG_RESULT(ok) -fi - -# Response file support. -if test "$lt_cv_nm_interface" = "MS dumpbin"; then - nm_file_list_spec='@' -elif $NM --help 2>/dev/null | grep '[[@]]FILE' >/dev/null; then - nm_file_list_spec='@' -fi - -_LT_DECL([global_symbol_pipe], [lt_cv_sys_global_symbol_pipe], [1], - [Take the output of nm and produce a listing of raw symbols and C names]) -_LT_DECL([global_symbol_to_cdecl], [lt_cv_sys_global_symbol_to_cdecl], [1], - [Transform the output of nm in a proper C declaration]) -_LT_DECL([global_symbol_to_c_name_address], - [lt_cv_sys_global_symbol_to_c_name_address], [1], - [Transform the output of nm in a C name address pair]) -_LT_DECL([global_symbol_to_c_name_address_lib_prefix], - [lt_cv_sys_global_symbol_to_c_name_address_lib_prefix], [1], - [Transform the output of nm in a C name address pair when lib prefix is needed]) -_LT_DECL([], [nm_file_list_spec], [1], - [Specify filename containing input files for $NM]) -]) # _LT_CMD_GLOBAL_SYMBOLS - - -# _LT_COMPILER_PIC([TAGNAME]) -# --------------------------- -m4_defun([_LT_COMPILER_PIC], -[m4_require([_LT_TAG_COMPILER])dnl -_LT_TAGVAR(lt_prog_compiler_wl, $1)= -_LT_TAGVAR(lt_prog_compiler_pic, $1)= -_LT_TAGVAR(lt_prog_compiler_static, $1)= - -m4_if([$1], [CXX], [ - # C++ specific cases for pic, static, wl, etc. - if test "$GXX" = yes; then - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' - - case $host_os in - aix*) - # All AIX code is PIC. - if test "$host_cpu" = ia64; then - # AIX 5 now supports IA64 processor - _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - fi - ;; - - amigaos*) - case $host_cpu in - powerpc) - # see comment about AmigaOS4 .so support - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' - ;; - m68k) - # FIXME: we need at least 68020 code to build shared libraries, but - # adding the `-m68020' flag to GCC prevents building anything better, - # like `-m68040'. - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4' - ;; - esac - ;; - - beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) - # PIC is the default for these OSes. - ;; - mingw* | cygwin* | os2* | pw32* | cegcc*) - # This hack is so that the source file can tell whether it is being - # built for inclusion in a dll (and should export symbols for example). - # Although the cygwin gcc ignores -fPIC, still need this for old-style - # (--disable-auto-import) libraries - m4_if([$1], [GCJ], [], - [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT']) - ;; - darwin* | rhapsody*) - # PIC is the default on this platform - # Common symbols not allowed in MH_DYLIB files - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common' - ;; - *djgpp*) - # DJGPP does not support shared libraries at all - _LT_TAGVAR(lt_prog_compiler_pic, $1)= - ;; - haiku*) - # PIC is the default for Haiku. - # The "-static" flag exists, but is broken. - _LT_TAGVAR(lt_prog_compiler_static, $1)= - ;; - interix[[3-9]]*) - # Interix 3.x gcc -fpic/-fPIC options generate broken code. - # Instead, we relocate shared libraries at runtime. - ;; - sysv4*MP*) - if test -d /usr/nec; then - _LT_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic - fi - ;; - hpux*) - # PIC is the default for 64-bit PA HP-UX, but not for 32-bit - # PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag - # sets the default TLS model and affects inlining. - case $host_cpu in - hppa*64*) - ;; - *) - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' - ;; - esac - ;; - *qnx* | *nto*) - # QNX uses GNU C++, but need to define -shared option too, otherwise - # it will coredump. - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared' - ;; - *) - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' - ;; - esac - else - case $host_os in - aix[[4-9]]*) - # All AIX code is PIC. - if test "$host_cpu" = ia64; then - # AIX 5 now supports IA64 processor - _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - else - _LT_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp' - fi - ;; - chorus*) - case $cc_basename in - cxch68*) - # Green Hills C++ Compiler - # _LT_TAGVAR(lt_prog_compiler_static, $1)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a" - ;; - esac - ;; - mingw* | cygwin* | os2* | pw32* | cegcc*) - # This hack is so that the source file can tell whether it is being - # built for inclusion in a dll (and should export symbols for example). - m4_if([$1], [GCJ], [], - [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT']) - ;; - dgux*) - case $cc_basename in - ec++*) - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' - ;; - ghcx*) - # Green Hills C++ Compiler - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic' - ;; - *) - ;; - esac - ;; - freebsd* | dragonfly*) - # FreeBSD uses GNU C++ - ;; - hpux9* | hpux10* | hpux11*) - case $cc_basename in - CC*) - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive' - if test "$host_cpu" != ia64; then - _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z' - fi - ;; - aCC*) - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive' - case $host_cpu in - hppa*64*|ia64*) - # +Z the default - ;; - *) - _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z' - ;; - esac - ;; - *) - ;; - esac - ;; - interix*) - # This is c89, which is MS Visual C++ (no shared libs) - # Anyone wants to do a port? - ;; - irix5* | irix6* | nonstopux*) - case $cc_basename in - CC*) - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' - # CC pic flag -KPIC is the default. - ;; - *) - ;; - esac - ;; - linux* | k*bsd*-gnu | kopensolaris*-gnu) - case $cc_basename in - KCC*) - # KAI C++ Compiler - _LT_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,' - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' - ;; - ecpc* ) - # old Intel C++ for x86_64 which still supported -KPIC. - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' - ;; - icpc* ) - # Intel C++, used to be incompatible with GCC. - # ICC 10 doesn't accept -KPIC any more. - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' - ;; - pgCC* | pgcpp*) - # Portland Group C++ compiler - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - ;; - cxx*) - # Compaq C++ - # Make sure the PIC flag is empty. It appears that all Alpha - # Linux and Compaq Tru64 Unix objects are PIC. - _LT_TAGVAR(lt_prog_compiler_pic, $1)= - _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' - ;; - xlc* | xlC* | bgxl[[cC]]* | mpixl[[cC]]*) - # IBM XL 8.0, 9.0 on PPC and BlueGene - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-qpic' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-qstaticlink' - ;; - *) - case `$CC -V 2>&1 | sed 5q` in - *Sun\ C*) - # Sun C++ 5.9 - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' - ;; - esac - ;; - esac - ;; - lynxos*) - ;; - m88k*) - ;; - mvs*) - case $cc_basename in - cxx*) - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-W c,exportall' - ;; - *) - ;; - esac - ;; - netbsd* | netbsdelf*-gnu) - ;; - *qnx* | *nto*) - # QNX uses GNU C++, but need to define -shared option too, otherwise - # it will coredump. - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared' - ;; - osf3* | osf4* | osf5*) - case $cc_basename in - KCC*) - _LT_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,' - ;; - RCC*) - # Rational C++ 2.4.1 - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic' - ;; - cxx*) - # Digital/Compaq C++ - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - # Make sure the PIC flag is empty. It appears that all Alpha - # Linux and Compaq Tru64 Unix objects are PIC. - _LT_TAGVAR(lt_prog_compiler_pic, $1)= - _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' - ;; - *) - ;; - esac - ;; - psos*) - ;; - solaris*) - case $cc_basename in - CC* | sunCC*) - # Sun C++ 4.2, 5.x and Centerline C++ - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' - ;; - gcx*) - # Green Hills C++ Compiler - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC' - ;; - *) - ;; - esac - ;; - sunos4*) - case $cc_basename in - CC*) - # Sun C++ 4.x - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - ;; - lcc*) - # Lucid - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic' - ;; - *) - ;; - esac - ;; - sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) - case $cc_basename in - CC*) - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - ;; - esac - ;; - tandem*) - case $cc_basename in - NCC*) - # NonStop-UX NCC 3.20 - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' - ;; - *) - ;; - esac - ;; - vxworks*) - ;; - *) - _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no - ;; - esac - fi -], -[ - if test "$GCC" = yes; then - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' - - case $host_os in - aix*) - # All AIX code is PIC. - if test "$host_cpu" = ia64; then - # AIX 5 now supports IA64 processor - _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - fi - ;; - - amigaos*) - case $host_cpu in - powerpc) - # see comment about AmigaOS4 .so support - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' - ;; - m68k) - # FIXME: we need at least 68020 code to build shared libraries, but - # adding the `-m68020' flag to GCC prevents building anything better, - # like `-m68040'. - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4' - ;; - esac - ;; - - beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) - # PIC is the default for these OSes. - ;; - - mingw* | cygwin* | pw32* | os2* | cegcc*) - # This hack is so that the source file can tell whether it is being - # built for inclusion in a dll (and should export symbols for example). - # Although the cygwin gcc ignores -fPIC, still need this for old-style - # (--disable-auto-import) libraries - m4_if([$1], [GCJ], [], - [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT']) - ;; - - darwin* | rhapsody*) - # PIC is the default on this platform - # Common symbols not allowed in MH_DYLIB files - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common' - ;; - - haiku*) - # PIC is the default for Haiku. - # The "-static" flag exists, but is broken. - _LT_TAGVAR(lt_prog_compiler_static, $1)= - ;; - - hpux*) - # PIC is the default for 64-bit PA HP-UX, but not for 32-bit - # PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag - # sets the default TLS model and affects inlining. - case $host_cpu in - hppa*64*) - # +Z the default - ;; - *) - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' - ;; - esac - ;; - - interix[[3-9]]*) - # Interix 3.x gcc -fpic/-fPIC options generate broken code. - # Instead, we relocate shared libraries at runtime. - ;; - - msdosdjgpp*) - # Just because we use GCC doesn't mean we suddenly get shared libraries - # on systems that don't support them. - _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no - enable_shared=no - ;; - - *nto* | *qnx*) - # QNX uses GNU C++, but need to define -shared option too, otherwise - # it will coredump. - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared' - ;; - - sysv4*MP*) - if test -d /usr/nec; then - _LT_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic - fi - ;; - - *) - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' - ;; - esac - - case $cc_basename in - nvcc*) # Cuda Compiler Driver 2.2 - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Xlinker ' - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-Xcompiler -fPIC' - ;; - esac - else - # PORTME Check for flag to pass linker flags through the system compiler. - case $host_os in - aix*) - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - if test "$host_cpu" = ia64; then - # AIX 5 now supports IA64 processor - _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - else - _LT_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp' - fi - ;; - - mingw* | cygwin* | pw32* | os2* | cegcc*) - # This hack is so that the source file can tell whether it is being - # built for inclusion in a dll (and should export symbols for example). - m4_if([$1], [GCJ], [], - [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT']) - ;; - - hpux9* | hpux10* | hpux11*) - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but - # not for PA HP-UX. - case $host_cpu in - hppa*64*|ia64*) - # +Z the default - ;; - *) - _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z' - ;; - esac - # Is there a better lt_prog_compiler_static that works with the bundled CC? - _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive' - ;; - - irix5* | irix6* | nonstopux*) - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - # PIC (with -KPIC) is the default. - _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' - ;; - - linux* | k*bsd*-gnu | kopensolaris*-gnu) - case $cc_basename in - # old Intel for x86_64 which still supported -KPIC. - ecc*) - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' - ;; - # icc used to be incompatible with GCC. - # ICC 10 doesn't accept -KPIC any more. - icc* | ifort*) - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' - ;; - # Lahey Fortran 8.1. - lf95*) - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_TAGVAR(lt_prog_compiler_pic, $1)='--shared' - _LT_TAGVAR(lt_prog_compiler_static, $1)='--static' - ;; - nagfor*) - # NAG Fortran compiler - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,-Wl,,' - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - ;; - pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*) - # Portland Group compilers (*not* the Pentium gcc compiler, - # which looks to be a dead project) - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - ;; - ccc*) - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - # All Alpha code is PIC. - _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' - ;; - xl* | bgxl* | bgf* | mpixl*) - # IBM XL C 8.0/Fortran 10.1, 11.1 on PPC and BlueGene - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-qpic' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-qstaticlink' - ;; - *) - case `$CC -V 2>&1 | sed 5q` in - *Sun\ F* | *Sun*Fortran*) - # Sun Fortran 8.3 passes all unrecognized flags to the linker - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - _LT_TAGVAR(lt_prog_compiler_wl, $1)='' - ;; - *Sun\ C*) - # Sun C 5.9 - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - ;; - esac - ;; - esac - ;; - - newsos6) - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - ;; - - *nto* | *qnx*) - # QNX uses GNU C++, but need to define -shared option too, otherwise - # it will coredump. - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared' - ;; - - osf3* | osf4* | osf5*) - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - # All OSF/1 code is PIC. - _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' - ;; - - rdos*) - _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' - ;; - - solaris*) - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - case $cc_basename in - f77* | f90* | f95* | sunf77* | sunf90* | sunf95*) - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ';; - *) - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,';; - esac - ;; - - sunos4*) - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - ;; - - sysv4 | sysv4.2uw2* | sysv4.3*) - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - ;; - - sysv4*MP*) - if test -d /usr/nec ;then - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-Kconform_pic' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - fi - ;; - - sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - ;; - - unicos*) - _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' - _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no - ;; - - uts4*) - _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic' - _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' - ;; - - *) - _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no - ;; - esac - fi -]) -case $host_os in - # For platforms which do not support PIC, -DPIC is meaningless: - *djgpp*) - _LT_TAGVAR(lt_prog_compiler_pic, $1)= - ;; - *) - _LT_TAGVAR(lt_prog_compiler_pic, $1)="$_LT_TAGVAR(lt_prog_compiler_pic, $1)@&t@m4_if([$1],[],[ -DPIC],[m4_if([$1],[CXX],[ -DPIC],[])])" - ;; -esac - -AC_CACHE_CHECK([for $compiler option to produce PIC], - [_LT_TAGVAR(lt_cv_prog_compiler_pic, $1)], - [_LT_TAGVAR(lt_cv_prog_compiler_pic, $1)=$_LT_TAGVAR(lt_prog_compiler_pic, $1)]) -_LT_TAGVAR(lt_prog_compiler_pic, $1)=$_LT_TAGVAR(lt_cv_prog_compiler_pic, $1) - -# -# Check to make sure the PIC flag actually works. -# -if test -n "$_LT_TAGVAR(lt_prog_compiler_pic, $1)"; then - _LT_COMPILER_OPTION([if $compiler PIC flag $_LT_TAGVAR(lt_prog_compiler_pic, $1) works], - [_LT_TAGVAR(lt_cv_prog_compiler_pic_works, $1)], - [$_LT_TAGVAR(lt_prog_compiler_pic, $1)@&t@m4_if([$1],[],[ -DPIC],[m4_if([$1],[CXX],[ -DPIC],[])])], [], - [case $_LT_TAGVAR(lt_prog_compiler_pic, $1) in - "" | " "*) ;; - *) _LT_TAGVAR(lt_prog_compiler_pic, $1)=" $_LT_TAGVAR(lt_prog_compiler_pic, $1)" ;; - esac], - [_LT_TAGVAR(lt_prog_compiler_pic, $1)= - _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no]) -fi -_LT_TAGDECL([pic_flag], [lt_prog_compiler_pic], [1], - [Additional compiler flags for building library objects]) - -_LT_TAGDECL([wl], [lt_prog_compiler_wl], [1], - [How to pass a linker flag through the compiler]) -# -# Check to make sure the static flag actually works. -# -wl=$_LT_TAGVAR(lt_prog_compiler_wl, $1) eval lt_tmp_static_flag=\"$_LT_TAGVAR(lt_prog_compiler_static, $1)\" -_LT_LINKER_OPTION([if $compiler static flag $lt_tmp_static_flag works], - _LT_TAGVAR(lt_cv_prog_compiler_static_works, $1), - $lt_tmp_static_flag, - [], - [_LT_TAGVAR(lt_prog_compiler_static, $1)=]) -_LT_TAGDECL([link_static_flag], [lt_prog_compiler_static], [1], - [Compiler flag to prevent dynamic linking]) -])# _LT_COMPILER_PIC - - -# _LT_LINKER_SHLIBS([TAGNAME]) -# ---------------------------- -# See if the linker supports building shared libraries. -m4_defun([_LT_LINKER_SHLIBS], -[AC_REQUIRE([LT_PATH_LD])dnl -AC_REQUIRE([LT_PATH_NM])dnl -m4_require([_LT_PATH_MANIFEST_TOOL])dnl -m4_require([_LT_FILEUTILS_DEFAULTS])dnl -m4_require([_LT_DECL_EGREP])dnl -m4_require([_LT_DECL_SED])dnl -m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl -m4_require([_LT_TAG_COMPILER])dnl -AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries]) -m4_if([$1], [CXX], [ - _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' - _LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'] - case $host_os in - aix[[4-9]]*) - # If we're using GNU nm, then we don't want the "-C" option. - # -C means demangle to AIX nm, but means don't demangle with GNU nm - # Also, AIX nm treats weak defined symbols like other global defined - # symbols, whereas GNU nm marks them as "W". - if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then - _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' - else - _LT_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' - fi - ;; - pw32*) - _LT_TAGVAR(export_symbols_cmds, $1)="$ltdll_cmds" - ;; - cygwin* | mingw* | cegcc*) - case $cc_basename in - cl*) ;; - *) - _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.* //'\'' | sort | uniq > $export_symbols' - _LT_TAGVAR(exclude_expsyms, $1)=['[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname'] - ;; - esac - ;; - linux* | k*bsd*-gnu | gnu*) - _LT_TAGVAR(link_all_deplibs, $1)=no - ;; - *) - _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' - ;; - esac -], [ - runpath_var= - _LT_TAGVAR(allow_undefined_flag, $1)= - _LT_TAGVAR(always_export_symbols, $1)=no - _LT_TAGVAR(archive_cmds, $1)= - _LT_TAGVAR(archive_expsym_cmds, $1)= - _LT_TAGVAR(compiler_needs_object, $1)=no - _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no - _LT_TAGVAR(export_dynamic_flag_spec, $1)= - _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' - _LT_TAGVAR(hardcode_automatic, $1)=no - _LT_TAGVAR(hardcode_direct, $1)=no - _LT_TAGVAR(hardcode_direct_absolute, $1)=no - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)= - _LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)= - _LT_TAGVAR(hardcode_libdir_separator, $1)= - _LT_TAGVAR(hardcode_minus_L, $1)=no - _LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported - _LT_TAGVAR(inherit_rpath, $1)=no - _LT_TAGVAR(link_all_deplibs, $1)=unknown - _LT_TAGVAR(module_cmds, $1)= - _LT_TAGVAR(module_expsym_cmds, $1)= - _LT_TAGVAR(old_archive_from_new_cmds, $1)= - _LT_TAGVAR(old_archive_from_expsyms_cmds, $1)= - _LT_TAGVAR(thread_safe_flag_spec, $1)= - _LT_TAGVAR(whole_archive_flag_spec, $1)= - # include_expsyms should be a list of space-separated symbols to be *always* - # included in the symbol list - _LT_TAGVAR(include_expsyms, $1)= - # exclude_expsyms can be an extended regexp of symbols to exclude - # it will be wrapped by ` (' and `)$', so one must not match beginning or - # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc', - # as well as any symbol that contains `d'. - _LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'] - # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out - # platforms (ab)use it in PIC code, but their linkers get confused if - # the symbol is explicitly referenced. Since portable code cannot - # rely on this symbol name, it's probably fine to never include it in - # preloaded symbol tables. - # Exclude shared library initialization/finalization symbols. -dnl Note also adjust exclude_expsyms for C++ above. - extract_expsyms_cmds= - - case $host_os in - cygwin* | mingw* | pw32* | cegcc*) - # FIXME: the MSVC++ port hasn't been tested in a loooong time - # When not using gcc, we currently assume that we are using - # Microsoft Visual C++. - if test "$GCC" != yes; then - with_gnu_ld=no - fi - ;; - interix*) - # we just hope/assume this is gcc and not c89 (= MSVC++) - with_gnu_ld=yes - ;; - openbsd*) - with_gnu_ld=no - ;; - linux* | k*bsd*-gnu | gnu*) - _LT_TAGVAR(link_all_deplibs, $1)=no - ;; - esac - - _LT_TAGVAR(ld_shlibs, $1)=yes - - # On some targets, GNU ld is compatible enough with the native linker - # that we're better off using the native interface for both. - lt_use_gnu_ld_interface=no - if test "$with_gnu_ld" = yes; then - case $host_os in - aix*) - # The AIX port of GNU ld has always aspired to compatibility - # with the native linker. However, as the warning in the GNU ld - # block says, versions before 2.19.5* couldn't really create working - # shared libraries, regardless of the interface used. - case `$LD -v 2>&1` in - *\ \(GNU\ Binutils\)\ 2.19.5*) ;; - *\ \(GNU\ Binutils\)\ 2.[[2-9]]*) ;; - *\ \(GNU\ Binutils\)\ [[3-9]]*) ;; - *) - lt_use_gnu_ld_interface=yes - ;; - esac - ;; - *) - lt_use_gnu_ld_interface=yes - ;; - esac - fi - - if test "$lt_use_gnu_ld_interface" = yes; then - # If archive_cmds runs LD, not CC, wlarc should be empty - wlarc='${wl}' - - # Set some defaults for GNU ld with shared library support. These - # are reset later if shared libraries are not supported. Putting them - # here allows them to be overridden if necessary. - runpath_var=LD_RUN_PATH - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' - _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' - # ancient GNU ld didn't support --whole-archive et. al. - if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then - _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' - else - _LT_TAGVAR(whole_archive_flag_spec, $1)= - fi - supports_anon_versioning=no - case `$LD -v 2>&1` in - *GNU\ gold*) supports_anon_versioning=yes ;; - *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.10.*) ;; # catch versions < 2.11 - *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... - *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ... - *\ 2.11.*) ;; # other 2.11 versions - *) supports_anon_versioning=yes ;; - esac - - # See if GNU ld supports shared libraries. - case $host_os in - aix[[3-9]]*) - # On AIX/PPC, the GNU linker is very broken - if test "$host_cpu" != ia64; then - _LT_TAGVAR(ld_shlibs, $1)=no - cat <<_LT_EOF 1>&2 - -*** Warning: the GNU linker, at least up to release 2.19, is reported -*** to be unable to reliably create shared libraries on AIX. -*** Therefore, libtool is disabling shared libraries support. If you -*** really care for shared libraries, you may want to install binutils -*** 2.20 or above, or modify your PATH so that a non-GNU linker is found. -*** You will then need to restart the configuration process. - -_LT_EOF - fi - ;; - - amigaos*) - case $host_cpu in - powerpc) - # see comment about AmigaOS4 .so support - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - _LT_TAGVAR(archive_expsym_cmds, $1)='' - ;; - m68k) - _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - _LT_TAGVAR(hardcode_minus_L, $1)=yes - ;; - esac - ;; - - beos*) - if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then - _LT_TAGVAR(allow_undefined_flag, $1)=unsupported - # Joseph Beckenbach says some releases of gcc - # support --undefined. This deserves some investigation. FIXME - _LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - else - _LT_TAGVAR(ld_shlibs, $1)=no - fi - ;; - - cygwin* | mingw* | pw32* | cegcc*) - # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless, - # as there is no search path for DLLs. - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-all-symbols' - _LT_TAGVAR(allow_undefined_flag, $1)=unsupported - _LT_TAGVAR(always_export_symbols, $1)=no - _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes - _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.* //'\'' | sort | uniq > $export_symbols' - _LT_TAGVAR(exclude_expsyms, $1)=['[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname'] - - if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' - # If the export-symbols file already is a .def file (1st line - # is EXPORTS), use it as is; otherwise, prepend... - _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then - cp $export_symbols $output_objdir/$soname.def; - else - echo EXPORTS > $output_objdir/$soname.def; - cat $export_symbols >> $output_objdir/$soname.def; - fi~ - $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' - else - _LT_TAGVAR(ld_shlibs, $1)=no - fi - ;; - - haiku*) - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - _LT_TAGVAR(link_all_deplibs, $1)=yes - ;; - - interix[[3-9]]*) - _LT_TAGVAR(hardcode_direct, $1)=no - _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' - _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' - # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. - # Instead, shared libraries are loaded at an image base (0x10000000 by - # default) and relocated if they conflict, which is a slow very memory - # consuming and fragmenting process. To avoid this, we pick a random, - # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link - # time. Moving up from 0x10000000 also allows more sbrk(2) space. - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' - _LT_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' - ;; - - gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu) - tmp_diet=no - if test "$host_os" = linux-dietlibc; then - case $cc_basename in - diet\ *) tmp_diet=yes;; # linux-dietlibc with static linking (!diet-dyn) - esac - fi - if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \ - && test "$tmp_diet" = no - then - tmp_addflag=' $pic_flag' - tmp_sharedflag='-shared' - case $cc_basename,$host_cpu in - pgcc*) # Portland Group C compiler - _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' - tmp_addflag=' $pic_flag' - ;; - pgf77* | pgf90* | pgf95* | pgfortran*) - # Portland Group f77 and f90 compilers - _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' - tmp_addflag=' $pic_flag -Mnomain' ;; - ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64 - tmp_addflag=' -i_dynamic' ;; - efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64 - tmp_addflag=' -i_dynamic -nofor_main' ;; - ifc* | ifort*) # Intel Fortran compiler - tmp_addflag=' -nofor_main' ;; - lf95*) # Lahey Fortran 8.1 - _LT_TAGVAR(whole_archive_flag_spec, $1)= - tmp_sharedflag='--shared' ;; - xl[[cC]]* | bgxl[[cC]]* | mpixl[[cC]]*) # IBM XL C 8.0 on PPC (deal with xlf below) - tmp_sharedflag='-qmkshrobj' - tmp_addflag= ;; - nvcc*) # Cuda Compiler Driver 2.2 - _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' - _LT_TAGVAR(compiler_needs_object, $1)=yes - ;; - esac - case `$CC -V 2>&1 | sed 5q` in - *Sun\ C*) # Sun C 5.9 - _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' - _LT_TAGVAR(compiler_needs_object, $1)=yes - tmp_sharedflag='-G' ;; - *Sun\ F*) # Sun Fortran 8.3 - tmp_sharedflag='-G' ;; - esac - _LT_TAGVAR(archive_cmds, $1)='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - - if test "x$supports_anon_versioning" = xyes; then - _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~ - cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ - echo "local: *; };" >> $output_objdir/$libname.ver~ - $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' - fi - - case $cc_basename in - xlf* | bgf* | bgxlf* | mpixlf*) - # IBM XL Fortran 10.1 on PPC cannot create shared libs itself - _LT_TAGVAR(whole_archive_flag_spec, $1)='--whole-archive$convenience --no-whole-archive' - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)= - _LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='-rpath $libdir' - _LT_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $linker_flags -soname $soname -o $lib' - if test "x$supports_anon_versioning" = xyes; then - _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~ - cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ - echo "local: *; };" >> $output_objdir/$libname.ver~ - $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib' - fi - ;; - esac - else - _LT_TAGVAR(ld_shlibs, $1)=no - fi - ;; - - netbsd* | netbsdelf*-gnu) - if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then - _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' - wlarc= - else - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - fi - ;; - - solaris*) - if $LD -v 2>&1 | $GREP 'BFD 2\.8' > /dev/null; then - _LT_TAGVAR(ld_shlibs, $1)=no - cat <<_LT_EOF 1>&2 - -*** Warning: The releases 2.8.* of the GNU linker cannot reliably -*** create shared libraries on Solaris systems. Therefore, libtool -*** is disabling shared libraries support. We urge you to upgrade GNU -*** binutils to release 2.9.1 or newer. Another option is to modify -*** your PATH or compiler configuration so that the native linker is -*** used, and then restart. - -_LT_EOF - elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - else - _LT_TAGVAR(ld_shlibs, $1)=no - fi - ;; - - sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*) - case `$LD -v 2>&1` in - *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.1[[0-5]].*) - _LT_TAGVAR(ld_shlibs, $1)=no - cat <<_LT_EOF 1>&2 - -*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not -*** reliably create shared libraries on SCO systems. Therefore, libtool -*** is disabling shared libraries support. We urge you to upgrade GNU -*** binutils to release 2.16.91.0.3 or newer. Another option is to modify -*** your PATH or compiler configuration so that the native linker is -*** used, and then restart. - -_LT_EOF - ;; - *) - # For security reasons, it is highly recommended that you always - # use absolute paths for naming shared libraries, and exclude the - # DT_RUNPATH tag from executables and libraries. But doing so - # requires that you compile everything twice, which is a pain. - if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - else - _LT_TAGVAR(ld_shlibs, $1)=no - fi - ;; - esac - ;; - - sunos4*) - _LT_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' - wlarc= - _LT_TAGVAR(hardcode_direct, $1)=yes - _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; - - *) - if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - else - _LT_TAGVAR(ld_shlibs, $1)=no - fi - ;; - esac - - if test "$_LT_TAGVAR(ld_shlibs, $1)" = no; then - runpath_var= - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)= - _LT_TAGVAR(export_dynamic_flag_spec, $1)= - _LT_TAGVAR(whole_archive_flag_spec, $1)= - fi - else - # PORTME fill in a description of your system's linker (not GNU ld) - case $host_os in - aix3*) - _LT_TAGVAR(allow_undefined_flag, $1)=unsupported - _LT_TAGVAR(always_export_symbols, $1)=yes - _LT_TAGVAR(archive_expsym_cmds, $1)='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname' - # Note: this linker hardcodes the directories in LIBPATH if there - # are no directories specified by -L. - _LT_TAGVAR(hardcode_minus_L, $1)=yes - if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then - # Neither direct hardcoding nor static linking is supported with a - # broken collect2. - _LT_TAGVAR(hardcode_direct, $1)=unsupported - fi - ;; - - aix[[4-9]]*) - if test "$host_cpu" = ia64; then - # On IA64, the linker does run time linking by default, so we don't - # have to do anything special. - aix_use_runtimelinking=no - exp_sym_flag='-Bexport' - no_entry_flag="" - else - # If we're using GNU nm, then we don't want the "-C" option. - # -C means demangle to AIX nm, but means don't demangle with GNU nm - # Also, AIX nm treats weak defined symbols like other global - # defined symbols, whereas GNU nm marks them as "W". - if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then - _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' - else - _LT_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' - fi - aix_use_runtimelinking=no - - # Test if we are trying to use run time linking or normal - # AIX style linking. If -brtl is somewhere in LDFLAGS, we - # need to do runtime linking. - case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*) - for ld_flag in $LDFLAGS; do - if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then - aix_use_runtimelinking=yes - break - fi - done - ;; - esac - - exp_sym_flag='-bexport' - no_entry_flag='-bnoentry' - fi - - # When large executables or shared objects are built, AIX ld can - # have problems creating the table of contents. If linking a library - # or program results in "error TOC overflow" add -mminimal-toc to - # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not - # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. - - _LT_TAGVAR(archive_cmds, $1)='' - _LT_TAGVAR(hardcode_direct, $1)=yes - _LT_TAGVAR(hardcode_direct_absolute, $1)=yes - _LT_TAGVAR(hardcode_libdir_separator, $1)=':' - _LT_TAGVAR(link_all_deplibs, $1)=yes - _LT_TAGVAR(file_list_spec, $1)='${wl}-f,' - - if test "$GCC" = yes; then - case $host_os in aix4.[[012]]|aix4.[[012]].*) - # We only want to do this on AIX 4.2 and lower, the check - # below for broken collect2 doesn't work under 4.3+ - collect2name=`${CC} -print-prog-name=collect2` - if test -f "$collect2name" && - strings "$collect2name" | $GREP resolve_lib_name >/dev/null - then - # We have reworked collect2 - : - else - # We have old collect2 - _LT_TAGVAR(hardcode_direct, $1)=unsupported - # It fails to find uninstalled libraries when the uninstalled - # path is not listed in the libpath. Setting hardcode_minus_L - # to unsupported forces relinking - _LT_TAGVAR(hardcode_minus_L, $1)=yes - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - _LT_TAGVAR(hardcode_libdir_separator, $1)= - fi - ;; - esac - shared_flag='-shared' - if test "$aix_use_runtimelinking" = yes; then - shared_flag="$shared_flag "'${wl}-G' - fi - _LT_TAGVAR(link_all_deplibs, $1)=no - else - # not using gcc - if test "$host_cpu" = ia64; then - # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release - # chokes on -Wl,-G. The following line is correct: - shared_flag='-G' - else - if test "$aix_use_runtimelinking" = yes; then - shared_flag='${wl}-G' - else - shared_flag='${wl}-bM:SRE' - fi - fi - fi - - _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-bexpall' - # It seems that -bexpall does not export symbols beginning with - # underscore (_), so it is better to generate a list of symbols to export. - _LT_TAGVAR(always_export_symbols, $1)=yes - if test "$aix_use_runtimelinking" = yes; then - # Warning - without using the other runtime loading flags (-brtl), - # -berok will link without error, but may produce a broken library. - _LT_TAGVAR(allow_undefined_flag, $1)='-berok' - # Determine the default libpath from the value encoded in an - # empty executable. - _LT_SYS_MODULE_PATH_AIX([$1]) - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" - else - if test "$host_cpu" = ia64; then - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib' - _LT_TAGVAR(allow_undefined_flag, $1)="-z nodefs" - _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" - else - # Determine the default libpath from the value encoded in an - # empty executable. - _LT_SYS_MODULE_PATH_AIX([$1]) - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" - # Warning - without using the other run time loading flags, - # -berok will link without error, but may produce a broken library. - _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok' - _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok' - if test "$with_gnu_ld" = yes; then - # We only use this code for GNU lds that support --whole-archive. - _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive' - else - # Exported symbols can be pulled into shared objects from archives - _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience' - fi - _LT_TAGVAR(archive_cmds_need_lc, $1)=yes - # This is similar to how AIX traditionally builds its shared libraries. - _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' - fi - fi - ;; - - amigaos*) - case $host_cpu in - powerpc) - # see comment about AmigaOS4 .so support - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - _LT_TAGVAR(archive_expsym_cmds, $1)='' - ;; - m68k) - _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - _LT_TAGVAR(hardcode_minus_L, $1)=yes - ;; - esac - ;; - - bsdi[[45]]*) - _LT_TAGVAR(export_dynamic_flag_spec, $1)=-rdynamic - ;; - - cygwin* | mingw* | pw32* | cegcc*) - # When not using gcc, we currently assume that we are using - # Microsoft Visual C++. - # hardcode_libdir_flag_spec is actually meaningless, as there is - # no search path for DLLs. - case $cc_basename in - cl*) - # Native MSVC - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' ' - _LT_TAGVAR(allow_undefined_flag, $1)=unsupported - _LT_TAGVAR(always_export_symbols, $1)=yes - _LT_TAGVAR(file_list_spec, $1)='@' - # Tell ltmain to make .lib files, not .a files. - libext=lib - # Tell ltmain to make .dll files, not .so files. - shrext_cmds=".dll" - # FIXME: Setting linknames here is a bad hack. - _LT_TAGVAR(archive_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames=' - _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then - sed -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp; - else - sed -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp; - fi~ - $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~ - linknames=' - # The linker will not automatically build a static lib if we build a DLL. - # _LT_TAGVAR(old_archive_from_new_cmds, $1)='true' - _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes - _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1,DATA/'\'' | $SED -e '\''/^[[AITW]][[ ]]/s/.*[[ ]]//'\'' | sort | uniq > $export_symbols' - # Don't use ranlib - _LT_TAGVAR(old_postinstall_cmds, $1)='chmod 644 $oldlib' - _LT_TAGVAR(postlink_cmds, $1)='lt_outputfile="@OUTPUT@"~ - lt_tool_outputfile="@TOOL_OUTPUT@"~ - case $lt_outputfile in - *.exe|*.EXE) ;; - *) - lt_outputfile="$lt_outputfile.exe" - lt_tool_outputfile="$lt_tool_outputfile.exe" - ;; - esac~ - if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then - $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1; - $RM "$lt_outputfile.manifest"; - fi' - ;; - *) - # Assume MSVC wrapper - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' ' - _LT_TAGVAR(allow_undefined_flag, $1)=unsupported - # Tell ltmain to make .lib files, not .a files. - libext=lib - # Tell ltmain to make .dll files, not .so files. - shrext_cmds=".dll" - # FIXME: Setting linknames here is a bad hack. - _LT_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames=' - # The linker will automatically build a .lib file if we build a DLL. - _LT_TAGVAR(old_archive_from_new_cmds, $1)='true' - # FIXME: Should let the user specify the lib program. - _LT_TAGVAR(old_archive_cmds, $1)='lib -OUT:$oldlib$oldobjs$old_deplibs' - _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes - ;; - esac - ;; - - darwin* | rhapsody*) - _LT_DARWIN_LINKER_FEATURES($1) - ;; - - dgux*) - _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; - - freebsd1*) - _LT_TAGVAR(ld_shlibs, $1)=no - ;; - - # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor - # support. Future versions do this automatically, but an explicit c++rt0.o - # does not break anything, and helps significantly (at the cost of a little - # extra space). - freebsd2.2*) - _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o' - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' - _LT_TAGVAR(hardcode_direct, $1)=yes - _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; - - # Unfortunately, older versions of FreeBSD 2 do not have this feature. - freebsd2*) - _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' - _LT_TAGVAR(hardcode_direct, $1)=yes - _LT_TAGVAR(hardcode_minus_L, $1)=yes - _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; - - # FreeBSD 3 and greater uses gcc -shared to do shared libraries. - freebsd* | dragonfly*) - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' - _LT_TAGVAR(hardcode_direct, $1)=yes - _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; - - hpux9*) - if test "$GCC" = yes; then - _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' - else - _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' - fi - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' - _LT_TAGVAR(hardcode_libdir_separator, $1)=: - _LT_TAGVAR(hardcode_direct, $1)=yes - - # hardcode_minus_L: Not really in the search PATH, - # but as the default location of the library. - _LT_TAGVAR(hardcode_minus_L, $1)=yes - _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' - ;; - - hpux10*) - if test "$GCC" = yes && test "$with_gnu_ld" = no; then - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' - else - _LT_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' - fi - if test "$with_gnu_ld" = no; then - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' - _LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='+b $libdir' - _LT_TAGVAR(hardcode_libdir_separator, $1)=: - _LT_TAGVAR(hardcode_direct, $1)=yes - _LT_TAGVAR(hardcode_direct_absolute, $1)=yes - _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' - # hardcode_minus_L: Not really in the search PATH, - # but as the default location of the library. - _LT_TAGVAR(hardcode_minus_L, $1)=yes - fi - ;; - - hpux11*) - if test "$GCC" = yes && test "$with_gnu_ld" = no; then - case $host_cpu in - hppa*64*) - _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' - ;; - ia64*) - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' - ;; - *) - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' - ;; - esac - else - case $host_cpu in - hppa*64*) - _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' - ;; - ia64*) - _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' - ;; - *) - m4_if($1, [], [ - # Older versions of the 11.00 compiler do not understand -b yet - # (HP92453-01 A.11.01.20 doesn't, HP92453-01 B.11.X.35175-35176.GP does) - _LT_LINKER_OPTION([if $CC understands -b], - _LT_TAGVAR(lt_cv_prog_compiler__b, $1), [-b], - [_LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'], - [_LT_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'])], - [_LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags']) - ;; - esac - fi - if test "$with_gnu_ld" = no; then - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' - _LT_TAGVAR(hardcode_libdir_separator, $1)=: - - case $host_cpu in - hppa*64*|ia64*) - _LT_TAGVAR(hardcode_direct, $1)=no - _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; - *) - _LT_TAGVAR(hardcode_direct, $1)=yes - _LT_TAGVAR(hardcode_direct_absolute, $1)=yes - _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' - - # hardcode_minus_L: Not really in the search PATH, - # but as the default location of the library. - _LT_TAGVAR(hardcode_minus_L, $1)=yes - ;; - esac - fi - ;; - - irix5* | irix6* | nonstopux*) - if test "$GCC" = yes; then - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' - # Try to use the -exported_symbol ld option, if it does not - # work, assume that -exports_file does not work either and - # implicitly export all symbols. - # This should be the same for all languages, so no per-tag cache variable. - AC_CACHE_CHECK([whether the $host_os linker accepts -exported_symbol], - [lt_cv_irix_exported_symbol], - [save_LDFLAGS="$LDFLAGS" - LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null" - AC_LINK_IFELSE( - [AC_LANG_SOURCE( - [AC_LANG_CASE([C], [[int foo (void) { return 0; }]], - [C++], [[int foo (void) { return 0; }]], - [Fortran 77], [[ - subroutine foo - end]], - [Fortran], [[ - subroutine foo - end]])])], - [lt_cv_irix_exported_symbol=yes], - [lt_cv_irix_exported_symbol=no]) - LDFLAGS="$save_LDFLAGS"]) - if test "$lt_cv_irix_exported_symbol" = yes; then - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib' - fi - else - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib' - fi - _LT_TAGVAR(archive_cmds_need_lc, $1)='no' - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' - _LT_TAGVAR(hardcode_libdir_separator, $1)=: - _LT_TAGVAR(inherit_rpath, $1)=yes - _LT_TAGVAR(link_all_deplibs, $1)=yes - ;; - - netbsd* | netbsdelf*-gnu) - if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then - _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out - else - _LT_TAGVAR(archive_cmds, $1)='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF - fi - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' - _LT_TAGVAR(hardcode_direct, $1)=yes - _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; - - newsos6) - _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - _LT_TAGVAR(hardcode_direct, $1)=yes - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' - _LT_TAGVAR(hardcode_libdir_separator, $1)=: - _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; - - *nto* | *qnx*) - ;; - - openbsd*) - if test -f /usr/libexec/ld.so; then - _LT_TAGVAR(hardcode_direct, $1)=yes - _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - _LT_TAGVAR(hardcode_direct_absolute, $1)=yes - if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols' - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' - _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' - else - case $host_os in - openbsd[[01]].* | openbsd2.[[0-7]] | openbsd2.[[0-7]].*) - _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' - ;; - *) - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' - ;; - esac - fi - else - _LT_TAGVAR(ld_shlibs, $1)=no - fi - ;; - - os2*) - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - _LT_TAGVAR(hardcode_minus_L, $1)=yes - _LT_TAGVAR(allow_undefined_flag, $1)=unsupported - _LT_TAGVAR(archive_cmds, $1)='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~echo DATA >> $output_objdir/$libname.def~echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' - _LT_TAGVAR(old_archive_from_new_cmds, $1)='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def' - ;; - - osf3*) - if test "$GCC" = yes; then - _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' - _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' - else - _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' - _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' - fi - _LT_TAGVAR(archive_cmds_need_lc, $1)='no' - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' - _LT_TAGVAR(hardcode_libdir_separator, $1)=: - ;; - - osf4* | osf5*) # as osf3* with the addition of -msym flag - if test "$GCC" = yes; then - _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' - _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $pic_flag $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' - else - _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' - _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' - _LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~ - $CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp' - - # Both c and cxx compiler support -rpath directly - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' - fi - _LT_TAGVAR(archive_cmds_need_lc, $1)='no' - _LT_TAGVAR(hardcode_libdir_separator, $1)=: - ;; - - solaris*) - _LT_TAGVAR(no_undefined_flag, $1)=' -z defs' - if test "$GCC" = yes; then - wlarc='${wl}' - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' - _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ - $CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' - else - case `$CC -V 2>&1` in - *"Compilers 5.0"*) - wlarc='' - _LT_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' - _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ - $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp' - ;; - *) - wlarc='${wl}' - _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $compiler_flags' - _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ - $CC -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' - ;; - esac - fi - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' - _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - case $host_os in - solaris2.[[0-5]] | solaris2.[[0-5]].*) ;; - *) - # The compiler driver will combine and reorder linker options, - # but understands `-z linker_flag'. GCC discards it without `$wl', - # but is careful enough not to reorder. - # Supported since Solaris 2.6 (maybe 2.5.1?) - if test "$GCC" = yes; then - _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' - else - _LT_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract' - fi - ;; - esac - _LT_TAGVAR(link_all_deplibs, $1)=yes - ;; - - sunos4*) - if test "x$host_vendor" = xsequent; then - # Use $CC to link under sequent, because it throws in some extra .o - # files that make .init and .fini sections work. - _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags' - else - _LT_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' - fi - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - _LT_TAGVAR(hardcode_direct, $1)=yes - _LT_TAGVAR(hardcode_minus_L, $1)=yes - _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; - - sysv4) - case $host_vendor in - sni) - _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - _LT_TAGVAR(hardcode_direct, $1)=yes # is this really true??? - ;; - siemens) - ## LD is ld it makes a PLAMLIB - ## CC just makes a GrossModule. - _LT_TAGVAR(archive_cmds, $1)='$LD -G -o $lib $libobjs $deplibs $linker_flags' - _LT_TAGVAR(reload_cmds, $1)='$CC -r -o $output$reload_objs' - _LT_TAGVAR(hardcode_direct, $1)=no - ;; - motorola) - _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - _LT_TAGVAR(hardcode_direct, $1)=no #Motorola manual says yes, but my tests say they lie - ;; - esac - runpath_var='LD_RUN_PATH' - _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; - - sysv4.3*) - _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - _LT_TAGVAR(export_dynamic_flag_spec, $1)='-Bexport' - ;; - - sysv4*MP*) - if test -d /usr/nec; then - _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - runpath_var=LD_RUN_PATH - hardcode_runpath_var=yes - _LT_TAGVAR(ld_shlibs, $1)=yes - fi - ;; - - sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*) - _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text' - _LT_TAGVAR(archive_cmds_need_lc, $1)=no - _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - runpath_var='LD_RUN_PATH' - - if test "$GCC" = yes; then - _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - else - _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - fi - ;; - - sysv5* | sco3.2v5* | sco5v6*) - # Note: We can NOT use -z defs as we might desire, because we do not - # link with -lc, and that would cause any symbols used from libc to - # always be unresolved, which means just about no library would - # ever link correctly. If we're not using GNU ld we use -z text - # though, which does catch some bad symbols but isn't as heavy-handed - # as -z defs. - _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text' - _LT_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs' - _LT_TAGVAR(archive_cmds_need_lc, $1)=no - _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R,$libdir' - _LT_TAGVAR(hardcode_libdir_separator, $1)=':' - _LT_TAGVAR(link_all_deplibs, $1)=yes - _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport' - runpath_var='LD_RUN_PATH' - - if test "$GCC" = yes; then - _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - else - _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - fi - ;; - - uts4*) - _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; - - *) - _LT_TAGVAR(ld_shlibs, $1)=no - ;; - esac - - if test x$host_vendor = xsni; then - case $host in - sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) - _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Blargedynsym' - ;; - esac - fi - fi -]) -AC_MSG_RESULT([$_LT_TAGVAR(ld_shlibs, $1)]) -test "$_LT_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no - -_LT_TAGVAR(with_gnu_ld, $1)=$with_gnu_ld - -_LT_DECL([], [libext], [0], [Old archive suffix (normally "a")])dnl -_LT_DECL([], [shrext_cmds], [1], [Shared library suffix (normally ".so")])dnl -_LT_DECL([], [extract_expsyms_cmds], [2], - [The commands to extract the exported symbol list from a shared archive]) - -# -# Do we need to explicitly link libc? -# -case "x$_LT_TAGVAR(archive_cmds_need_lc, $1)" in -x|xyes) - # Assume -lc should be added - _LT_TAGVAR(archive_cmds_need_lc, $1)=yes - - if test "$enable_shared" = yes && test "$GCC" = yes; then - case $_LT_TAGVAR(archive_cmds, $1) in - *'~'*) - # FIXME: we may have to deal with multi-command sequences. - ;; - '$CC '*) - # Test whether the compiler implicitly links with -lc since on some - # systems, -lgcc has to come before -lc. If gcc already passes -lc - # to ld, don't add -lc before -lgcc. - AC_CACHE_CHECK([whether -lc should be explicitly linked in], - [lt_cv_]_LT_TAGVAR(archive_cmds_need_lc, $1), - [$RM conftest* - echo "$lt_simple_compile_test_code" > conftest.$ac_ext - - if AC_TRY_EVAL(ac_compile) 2>conftest.err; then - soname=conftest - lib=conftest - libobjs=conftest.$ac_objext - deplibs= - wl=$_LT_TAGVAR(lt_prog_compiler_wl, $1) - pic_flag=$_LT_TAGVAR(lt_prog_compiler_pic, $1) - compiler_flags=-v - linker_flags=-v - verstring= - output_objdir=. - libname=conftest - lt_save_allow_undefined_flag=$_LT_TAGVAR(allow_undefined_flag, $1) - _LT_TAGVAR(allow_undefined_flag, $1)= - if AC_TRY_EVAL(_LT_TAGVAR(archive_cmds, $1) 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) - then - lt_cv_[]_LT_TAGVAR(archive_cmds_need_lc, $1)=no - else - lt_cv_[]_LT_TAGVAR(archive_cmds_need_lc, $1)=yes - fi - _LT_TAGVAR(allow_undefined_flag, $1)=$lt_save_allow_undefined_flag - else - cat conftest.err 1>&5 - fi - $RM conftest* - ]) - _LT_TAGVAR(archive_cmds_need_lc, $1)=$lt_cv_[]_LT_TAGVAR(archive_cmds_need_lc, $1) - ;; - esac - fi - ;; -esac - -_LT_TAGDECL([build_libtool_need_lc], [archive_cmds_need_lc], [0], - [Whether or not to add -lc for building shared libraries]) -_LT_TAGDECL([allow_libtool_libs_with_static_runtimes], - [enable_shared_with_static_runtimes], [0], - [Whether or not to disallow shared libs when runtime libs are static]) -_LT_TAGDECL([], [export_dynamic_flag_spec], [1], - [Compiler flag to allow reflexive dlopens]) -_LT_TAGDECL([], [whole_archive_flag_spec], [1], - [Compiler flag to generate shared objects directly from archives]) -_LT_TAGDECL([], [compiler_needs_object], [1], - [Whether the compiler copes with passing no objects directly]) -_LT_TAGDECL([], [old_archive_from_new_cmds], [2], - [Create an old-style archive from a shared archive]) -_LT_TAGDECL([], [old_archive_from_expsyms_cmds], [2], - [Create a temporary old-style archive to link instead of a shared archive]) -_LT_TAGDECL([], [archive_cmds], [2], [Commands used to build a shared archive]) -_LT_TAGDECL([], [archive_expsym_cmds], [2]) -_LT_TAGDECL([], [module_cmds], [2], - [Commands used to build a loadable module if different from building - a shared archive.]) -_LT_TAGDECL([], [module_expsym_cmds], [2]) -_LT_TAGDECL([], [with_gnu_ld], [1], - [Whether we are building with GNU ld or not]) -_LT_TAGDECL([], [allow_undefined_flag], [1], - [Flag that allows shared libraries with undefined symbols to be built]) -_LT_TAGDECL([], [no_undefined_flag], [1], - [Flag that enforces no undefined symbols]) -_LT_TAGDECL([], [hardcode_libdir_flag_spec], [1], - [Flag to hardcode $libdir into a binary during linking. - This must work even if $libdir does not exist]) -_LT_TAGDECL([], [hardcode_libdir_flag_spec_ld], [1], - [[If ld is used when linking, flag to hardcode $libdir into a binary - during linking. This must work even if $libdir does not exist]]) -_LT_TAGDECL([], [hardcode_libdir_separator], [1], - [Whether we need a single "-rpath" flag with a separated argument]) -_LT_TAGDECL([], [hardcode_direct], [0], - [Set to "yes" if using DIR/libNAME${shared_ext} during linking hardcodes - DIR into the resulting binary]) -_LT_TAGDECL([], [hardcode_direct_absolute], [0], - [Set to "yes" if using DIR/libNAME${shared_ext} during linking hardcodes - DIR into the resulting binary and the resulting library dependency is - "absolute", i.e impossible to change by setting ${shlibpath_var} if the - library is relocated]) -_LT_TAGDECL([], [hardcode_minus_L], [0], - [Set to "yes" if using the -LDIR flag during linking hardcodes DIR - into the resulting binary]) -_LT_TAGDECL([], [hardcode_shlibpath_var], [0], - [Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR - into the resulting binary]) -_LT_TAGDECL([], [hardcode_automatic], [0], - [Set to "yes" if building a shared library automatically hardcodes DIR - into the library and all subsequent libraries and executables linked - against it]) -_LT_TAGDECL([], [inherit_rpath], [0], - [Set to yes if linker adds runtime paths of dependent libraries - to runtime path list]) -_LT_TAGDECL([], [link_all_deplibs], [0], - [Whether libtool must link a program against all its dependency libraries]) -_LT_TAGDECL([], [always_export_symbols], [0], - [Set to "yes" if exported symbols are required]) -_LT_TAGDECL([], [export_symbols_cmds], [2], - [The commands to list exported symbols]) -_LT_TAGDECL([], [exclude_expsyms], [1], - [Symbols that should not be listed in the preloaded symbols]) -_LT_TAGDECL([], [include_expsyms], [1], - [Symbols that must always be exported]) -_LT_TAGDECL([], [prelink_cmds], [2], - [Commands necessary for linking programs (against libraries) with templates]) -_LT_TAGDECL([], [postlink_cmds], [2], - [Commands necessary for finishing linking programs]) -_LT_TAGDECL([], [file_list_spec], [1], - [Specify filename containing input files]) -dnl FIXME: Not yet implemented -dnl _LT_TAGDECL([], [thread_safe_flag_spec], [1], -dnl [Compiler flag to generate thread safe objects]) -])# _LT_LINKER_SHLIBS - - -# _LT_LANG_C_CONFIG([TAG]) -# ------------------------ -# Ensure that the configuration variables for a C compiler are suitably -# defined. These variables are subsequently used by _LT_CONFIG to write -# the compiler configuration to `libtool'. -m4_defun([_LT_LANG_C_CONFIG], -[m4_require([_LT_DECL_EGREP])dnl -lt_save_CC="$CC" -AC_LANG_PUSH(C) - -# Source file extension for C test sources. -ac_ext=c - -# Object file extension for compiled C test sources. -objext=o -_LT_TAGVAR(objext, $1)=$objext - -# Code to be used in simple compile tests -lt_simple_compile_test_code="int some_variable = 0;" - -# Code to be used in simple link tests -lt_simple_link_test_code='int main(){return(0);}' - -_LT_TAG_COMPILER -# Save the default compiler, since it gets overwritten when the other -# tags are being tested, and _LT_TAGVAR(compiler, []) is a NOP. -compiler_DEFAULT=$CC - -# save warnings/boilerplate of simple test code -_LT_COMPILER_BOILERPLATE -_LT_LINKER_BOILERPLATE - -if test -n "$compiler"; then - _LT_COMPILER_NO_RTTI($1) - _LT_COMPILER_PIC($1) - _LT_COMPILER_C_O($1) - _LT_COMPILER_FILE_LOCKS($1) - _LT_LINKER_SHLIBS($1) - _LT_SYS_DYNAMIC_LINKER($1) - _LT_LINKER_HARDCODE_LIBPATH($1) - LT_SYS_DLOPEN_SELF - _LT_CMD_STRIPLIB - - # Report which library types will actually be built - AC_MSG_CHECKING([if libtool supports shared libraries]) - AC_MSG_RESULT([$can_build_shared]) - - AC_MSG_CHECKING([whether to build shared libraries]) - test "$can_build_shared" = "no" && enable_shared=no - - # On AIX, shared libraries and static libraries use the same namespace, and - # are all built from PIC. - case $host_os in - aix3*) - test "$enable_shared" = yes && enable_static=no - if test -n "$RANLIB"; then - archive_cmds="$archive_cmds~\$RANLIB \$lib" - postinstall_cmds='$RANLIB $lib' - fi - ;; - - aix[[4-9]]*) - if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then - test "$enable_shared" = yes && enable_static=no - fi - ;; - esac - AC_MSG_RESULT([$enable_shared]) - - AC_MSG_CHECKING([whether to build static libraries]) - # Make sure either enable_shared or enable_static is yes. - test "$enable_shared" = yes || enable_static=yes - AC_MSG_RESULT([$enable_static]) - - _LT_CONFIG($1) -fi -AC_LANG_POP -CC="$lt_save_CC" -])# _LT_LANG_C_CONFIG - - -# _LT_LANG_CXX_CONFIG([TAG]) -# -------------------------- -# Ensure that the configuration variables for a C++ compiler are suitably -# defined. These variables are subsequently used by _LT_CONFIG to write -# the compiler configuration to `libtool'. -m4_defun([_LT_LANG_CXX_CONFIG], -[m4_require([_LT_FILEUTILS_DEFAULTS])dnl -m4_require([_LT_DECL_EGREP])dnl -m4_require([_LT_PATH_MANIFEST_TOOL])dnl -if test -n "$CXX" && ( test "X$CXX" != "Xno" && - ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) || - (test "X$CXX" != "Xg++"))) ; then - AC_PROG_CXXCPP -else - _lt_caught_CXX_error=yes -fi - -AC_LANG_PUSH(C++) -_LT_TAGVAR(archive_cmds_need_lc, $1)=no -_LT_TAGVAR(allow_undefined_flag, $1)= -_LT_TAGVAR(always_export_symbols, $1)=no -_LT_TAGVAR(archive_expsym_cmds, $1)= -_LT_TAGVAR(compiler_needs_object, $1)=no -_LT_TAGVAR(export_dynamic_flag_spec, $1)= -_LT_TAGVAR(hardcode_direct, $1)=no -_LT_TAGVAR(hardcode_direct_absolute, $1)=no -_LT_TAGVAR(hardcode_libdir_flag_spec, $1)= -_LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)= -_LT_TAGVAR(hardcode_libdir_separator, $1)= -_LT_TAGVAR(hardcode_minus_L, $1)=no -_LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported -_LT_TAGVAR(hardcode_automatic, $1)=no -_LT_TAGVAR(inherit_rpath, $1)=no -_LT_TAGVAR(module_cmds, $1)= -_LT_TAGVAR(module_expsym_cmds, $1)= -_LT_TAGVAR(link_all_deplibs, $1)=unknown -_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds -_LT_TAGVAR(reload_flag, $1)=$reload_flag -_LT_TAGVAR(reload_cmds, $1)=$reload_cmds -_LT_TAGVAR(no_undefined_flag, $1)= -_LT_TAGVAR(whole_archive_flag_spec, $1)= -_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no - -# Source file extension for C++ test sources. -ac_ext=cpp - -# Object file extension for compiled C++ test sources. -objext=o -_LT_TAGVAR(objext, $1)=$objext - -# No sense in running all these tests if we already determined that -# the CXX compiler isn't working. Some variables (like enable_shared) -# are currently assumed to apply to all compilers on this platform, -# and will be corrupted by setting them based on a non-working compiler. -if test "$_lt_caught_CXX_error" != yes; then - # Code to be used in simple compile tests - lt_simple_compile_test_code="int some_variable = 0;" - - # Code to be used in simple link tests - lt_simple_link_test_code='int main(int, char *[[]]) { return(0); }' - - # ltmain only uses $CC for tagged configurations so make sure $CC is set. - _LT_TAG_COMPILER - - # save warnings/boilerplate of simple test code - _LT_COMPILER_BOILERPLATE - _LT_LINKER_BOILERPLATE - - # Allow CC to be a program name with arguments. - lt_save_CC=$CC - lt_save_CFLAGS=$CFLAGS - lt_save_LD=$LD - lt_save_GCC=$GCC - GCC=$GXX - lt_save_with_gnu_ld=$with_gnu_ld - lt_save_path_LD=$lt_cv_path_LD - if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then - lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx - else - $as_unset lt_cv_prog_gnu_ld - fi - if test -n "${lt_cv_path_LDCXX+set}"; then - lt_cv_path_LD=$lt_cv_path_LDCXX - else - $as_unset lt_cv_path_LD - fi - test -z "${LDCXX+set}" || LD=$LDCXX - CC=${CXX-"c++"} - CFLAGS=$CXXFLAGS - compiler=$CC - _LT_TAGVAR(compiler, $1)=$CC - _LT_CC_BASENAME([$compiler]) - - if test -n "$compiler"; then - # We don't want -fno-exception when compiling C++ code, so set the - # no_builtin_flag separately - if test "$GXX" = yes; then - _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin' - else - _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)= - fi - - if test "$GXX" = yes; then - # Set up default GNU C++ configuration - - LT_PATH_LD - - # Check if GNU C++ uses GNU ld as the underlying linker, since the - # archiving commands below assume that GNU ld is being used. - if test "$with_gnu_ld" = yes; then - _LT_TAGVAR(archive_cmds, $1)='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' - _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' - - # If archive_cmds runs LD, not CC, wlarc should be empty - # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to - # investigate it a little bit more. (MM) - wlarc='${wl}' - - # ancient GNU ld didn't support --whole-archive et. al. - if eval "`$CC -print-prog-name=ld` --help 2>&1" | - $GREP 'no-whole-archive' > /dev/null; then - _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' - else - _LT_TAGVAR(whole_archive_flag_spec, $1)= - fi - else - with_gnu_ld=no - wlarc= - - # A generic and very simple default shared library creation - # command for GNU C++ for the case where it uses the native - # linker, instead of GNU ld. If possible, this setting should - # overridden to take advantage of the native linker features on - # the platform it is being used on. - _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' - fi - - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"' - - else - GXX=no - with_gnu_ld=no - wlarc= - fi - - # PORTME: fill in a description of your system's C++ link characteristics - AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries]) - _LT_TAGVAR(ld_shlibs, $1)=yes - case $host_os in - aix3*) - # FIXME: insert proper C++ library support - _LT_TAGVAR(ld_shlibs, $1)=no - ;; - aix[[4-9]]*) - if test "$host_cpu" = ia64; then - # On IA64, the linker does run time linking by default, so we don't - # have to do anything special. - aix_use_runtimelinking=no - exp_sym_flag='-Bexport' - no_entry_flag="" - else - aix_use_runtimelinking=no - - # Test if we are trying to use run time linking or normal - # AIX style linking. If -brtl is somewhere in LDFLAGS, we - # need to do runtime linking. - case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*) - for ld_flag in $LDFLAGS; do - case $ld_flag in - *-brtl*) - aix_use_runtimelinking=yes - break - ;; - esac - done - ;; - esac - - exp_sym_flag='-bexport' - no_entry_flag='-bnoentry' - fi - - # When large executables or shared objects are built, AIX ld can - # have problems creating the table of contents. If linking a library - # or program results in "error TOC overflow" add -mminimal-toc to - # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not - # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. - - _LT_TAGVAR(archive_cmds, $1)='' - _LT_TAGVAR(hardcode_direct, $1)=yes - _LT_TAGVAR(hardcode_direct_absolute, $1)=yes - _LT_TAGVAR(hardcode_libdir_separator, $1)=':' - _LT_TAGVAR(link_all_deplibs, $1)=yes - _LT_TAGVAR(file_list_spec, $1)='${wl}-f,' - - if test "$GXX" = yes; then - case $host_os in aix4.[[012]]|aix4.[[012]].*) - # We only want to do this on AIX 4.2 and lower, the check - # below for broken collect2 doesn't work under 4.3+ - collect2name=`${CC} -print-prog-name=collect2` - if test -f "$collect2name" && - strings "$collect2name" | $GREP resolve_lib_name >/dev/null - then - # We have reworked collect2 - : - else - # We have old collect2 - _LT_TAGVAR(hardcode_direct, $1)=unsupported - # It fails to find uninstalled libraries when the uninstalled - # path is not listed in the libpath. Setting hardcode_minus_L - # to unsupported forces relinking - _LT_TAGVAR(hardcode_minus_L, $1)=yes - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - _LT_TAGVAR(hardcode_libdir_separator, $1)= - fi - esac - shared_flag='-shared' - if test "$aix_use_runtimelinking" = yes; then - shared_flag="$shared_flag "'${wl}-G' - fi - else - # not using gcc - if test "$host_cpu" = ia64; then - # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release - # chokes on -Wl,-G. The following line is correct: - shared_flag='-G' - else - if test "$aix_use_runtimelinking" = yes; then - shared_flag='${wl}-G' - else - shared_flag='${wl}-bM:SRE' - fi - fi - fi - - _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-bexpall' - # It seems that -bexpall does not export symbols beginning with - # underscore (_), so it is better to generate a list of symbols to - # export. - _LT_TAGVAR(always_export_symbols, $1)=yes - if test "$aix_use_runtimelinking" = yes; then - # Warning - without using the other runtime loading flags (-brtl), - # -berok will link without error, but may produce a broken library. - _LT_TAGVAR(allow_undefined_flag, $1)='-berok' - # Determine the default libpath from the value encoded in an empty - # executable. - _LT_SYS_MODULE_PATH_AIX([$1]) - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" - - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" - else - if test "$host_cpu" = ia64; then - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib' - _LT_TAGVAR(allow_undefined_flag, $1)="-z nodefs" - _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" - else - # Determine the default libpath from the value encoded in an - # empty executable. - _LT_SYS_MODULE_PATH_AIX([$1]) - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" - # Warning - without using the other run time loading flags, - # -berok will link without error, but may produce a broken library. - _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok' - _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok' - if test "$with_gnu_ld" = yes; then - # We only use this code for GNU lds that support --whole-archive. - _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive' - else - # Exported symbols can be pulled into shared objects from archives - _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience' - fi - _LT_TAGVAR(archive_cmds_need_lc, $1)=yes - # This is similar to how AIX traditionally builds its shared - # libraries. - _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' - fi - fi - ;; - - beos*) - if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then - _LT_TAGVAR(allow_undefined_flag, $1)=unsupported - # Joseph Beckenbach says some releases of gcc - # support --undefined. This deserves some investigation. FIXME - _LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - else - _LT_TAGVAR(ld_shlibs, $1)=no - fi - ;; - - chorus*) - case $cc_basename in - *) - # FIXME: insert proper C++ library support - _LT_TAGVAR(ld_shlibs, $1)=no - ;; - esac - ;; - - cygwin* | mingw* | pw32* | cegcc*) - case $GXX,$cc_basename in - ,cl* | no,cl*) - # Native MSVC - # hardcode_libdir_flag_spec is actually meaningless, as there is - # no search path for DLLs. - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' ' - _LT_TAGVAR(allow_undefined_flag, $1)=unsupported - _LT_TAGVAR(always_export_symbols, $1)=yes - _LT_TAGVAR(file_list_spec, $1)='@' - # Tell ltmain to make .lib files, not .a files. - libext=lib - # Tell ltmain to make .dll files, not .so files. - shrext_cmds=".dll" - # FIXME: Setting linknames here is a bad hack. - _LT_TAGVAR(archive_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames=' - _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then - $SED -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp; - else - $SED -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp; - fi~ - $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~ - linknames=' - # The linker will not automatically build a static lib if we build a DLL. - # _LT_TAGVAR(old_archive_from_new_cmds, $1)='true' - _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes - # Don't use ranlib - _LT_TAGVAR(old_postinstall_cmds, $1)='chmod 644 $oldlib' - _LT_TAGVAR(postlink_cmds, $1)='lt_outputfile="@OUTPUT@"~ - lt_tool_outputfile="@TOOL_OUTPUT@"~ - case $lt_outputfile in - *.exe|*.EXE) ;; - *) - lt_outputfile="$lt_outputfile.exe" - lt_tool_outputfile="$lt_tool_outputfile.exe" - ;; - esac~ - func_to_tool_file "$lt_outputfile"~ - if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then - $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1; - $RM "$lt_outputfile.manifest"; - fi' - ;; - *) - # g++ - # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless, - # as there is no search path for DLLs. - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' - _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-all-symbols' - _LT_TAGVAR(allow_undefined_flag, $1)=unsupported - _LT_TAGVAR(always_export_symbols, $1)=no - _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes - - if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then - _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' - # If the export-symbols file already is a .def file (1st line - # is EXPORTS), use it as is; otherwise, prepend... - _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then - cp $export_symbols $output_objdir/$soname.def; - else - echo EXPORTS > $output_objdir/$soname.def; - cat $export_symbols >> $output_objdir/$soname.def; - fi~ - $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' - else - _LT_TAGVAR(ld_shlibs, $1)=no - fi - ;; - esac - ;; - darwin* | rhapsody*) - _LT_DARWIN_LINKER_FEATURES($1) - ;; - - dgux*) - case $cc_basename in - ec++*) - # FIXME: insert proper C++ library support - _LT_TAGVAR(ld_shlibs, $1)=no - ;; - ghcx*) - # Green Hills C++ Compiler - # FIXME: insert proper C++ library support - _LT_TAGVAR(ld_shlibs, $1)=no - ;; - *) - # FIXME: insert proper C++ library support - _LT_TAGVAR(ld_shlibs, $1)=no - ;; - esac - ;; - - freebsd[[12]]*) - # C++ shared libraries reported to be fairly broken before - # switch to ELF - _LT_TAGVAR(ld_shlibs, $1)=no - ;; - - freebsd-elf*) - _LT_TAGVAR(archive_cmds_need_lc, $1)=no - ;; - - freebsd* | dragonfly*) - # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF - # conventions - _LT_TAGVAR(ld_shlibs, $1)=yes - ;; - - gnu*) - ;; - - haiku*) - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - _LT_TAGVAR(link_all_deplibs, $1)=yes - ;; - - hpux9*) - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' - _LT_TAGVAR(hardcode_libdir_separator, $1)=: - _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' - _LT_TAGVAR(hardcode_direct, $1)=yes - _LT_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH, - # but as the default - # location of the library. - - case $cc_basename in - CC*) - # FIXME: insert proper C++ library support - _LT_TAGVAR(ld_shlibs, $1)=no - ;; - aCC*) - _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - # - # There doesn't appear to be a way to prevent this compiler from - # explicitly linking system object files so we need to strip them - # from the output so that they don't get included in the library - # dependencies. - output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $EGREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"' - ;; - *) - if test "$GXX" = yes; then - _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared -nostdlib $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' - else - # FIXME: insert proper C++ library support - _LT_TAGVAR(ld_shlibs, $1)=no - fi - ;; - esac - ;; - - hpux10*|hpux11*) - if test $with_gnu_ld = no; then - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' - _LT_TAGVAR(hardcode_libdir_separator, $1)=: - - case $host_cpu in - hppa*64*|ia64*) - ;; - *) - _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' - ;; - esac - fi - case $host_cpu in - hppa*64*|ia64*) - _LT_TAGVAR(hardcode_direct, $1)=no - _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - ;; - *) - _LT_TAGVAR(hardcode_direct, $1)=yes - _LT_TAGVAR(hardcode_direct_absolute, $1)=yes - _LT_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH, - # but as the default - # location of the library. - ;; - esac - - case $cc_basename in - CC*) - # FIXME: insert proper C++ library support - _LT_TAGVAR(ld_shlibs, $1)=no - ;; - aCC*) - case $host_cpu in - hppa*64*) - _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' - ;; - ia64*) - _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' - ;; - *) - _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' - ;; - esac - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - # - # There doesn't appear to be a way to prevent this compiler from - # explicitly linking system object files so we need to strip them - # from the output so that they don't get included in the library - # dependencies. - output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $GREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"' - ;; - *) - if test "$GXX" = yes; then - if test $with_gnu_ld = no; then - case $host_cpu in - hppa*64*) - _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' - ;; - ia64*) - _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' - ;; - *) - _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' - ;; - esac - fi - else - # FIXME: insert proper C++ library support - _LT_TAGVAR(ld_shlibs, $1)=no - fi - ;; - esac - ;; - - interix[[3-9]]*) - _LT_TAGVAR(hardcode_direct, $1)=no - _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' - _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' - # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. - # Instead, shared libraries are loaded at an image base (0x10000000 by - # default) and relocated if they conflict, which is a slow very memory - # consuming and fragmenting process. To avoid this, we pick a random, - # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link - # time. Moving up from 0x10000000 also allows more sbrk(2) space. - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' - _LT_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' - ;; - irix5* | irix6*) - case $cc_basename in - CC*) - # SGI C++ - _LT_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' - - # Archives containing C++ object files must be created using - # "CC -ar", where "CC" is the IRIX C++ compiler. This is - # necessary to make sure instantiated templates are included - # in the archive. - _LT_TAGVAR(old_archive_cmds, $1)='$CC -ar -WR,-u -o $oldlib $oldobjs' - ;; - *) - if test "$GXX" = yes; then - if test "$with_gnu_ld" = no; then - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' - else - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` -o $lib' - fi - fi - _LT_TAGVAR(link_all_deplibs, $1)=yes - ;; - esac - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' - _LT_TAGVAR(hardcode_libdir_separator, $1)=: - _LT_TAGVAR(inherit_rpath, $1)=yes - ;; - - linux* | k*bsd*-gnu | kopensolaris*-gnu) - case $cc_basename in - KCC*) - # Kuck and Associates, Inc. (KAI) C++ Compiler - - # KCC will only create a shared library if the output file - # ends with ".so" (or ".sl" for HP-UX), so rename the library - # to its proper name (with version) after linking. - _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' - _LT_TAGVAR(archive_expsym_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib' - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - # - # There doesn't appear to be a way to prevent this compiler from - # explicitly linking system object files so we need to strip them - # from the output so that they don't get included in the library - # dependencies. - output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | $GREP "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"' - - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' - _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' - - # Archives containing C++ object files must be created using - # "CC -Bstatic", where "CC" is the KAI C++ compiler. - _LT_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs' - ;; - icpc* | ecpc* ) - # Intel C++ - with_gnu_ld=yes - # version 8.0 and above of icpc choke on multiply defined symbols - # if we add $predep_objects and $postdep_objects, however 7.1 and - # earlier do not add the objects themselves. - case `$CC -V 2>&1` in - *"Version 7."*) - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - ;; - *) # Version 8.0 or newer - tmp_idyn= - case $host_cpu in - ia64*) tmp_idyn=' -i_dynamic';; - esac - _LT_TAGVAR(archive_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - ;; - esac - _LT_TAGVAR(archive_cmds_need_lc, $1)=no - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' - _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' - _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive' - ;; - pgCC* | pgcpp*) - # Portland Group C++ compiler - case `$CC -V` in - *pgCC\ [[1-5]].* | *pgcpp\ [[1-5]].*) - _LT_TAGVAR(prelink_cmds, $1)='tpldir=Template.dir~ - rm -rf $tpldir~ - $CC --prelink_objects --instantiation_dir $tpldir $objs $libobjs $compile_deplibs~ - compile_command="$compile_command `find $tpldir -name \*.o | sort | $NL2SP`"' - _LT_TAGVAR(old_archive_cmds, $1)='tpldir=Template.dir~ - rm -rf $tpldir~ - $CC --prelink_objects --instantiation_dir $tpldir $oldobjs$old_deplibs~ - $AR $AR_FLAGS $oldlib$oldobjs$old_deplibs `find $tpldir -name \*.o | sort | $NL2SP`~ - $RANLIB $oldlib' - _LT_TAGVAR(archive_cmds, $1)='tpldir=Template.dir~ - rm -rf $tpldir~ - $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~ - $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib' - _LT_TAGVAR(archive_expsym_cmds, $1)='tpldir=Template.dir~ - rm -rf $tpldir~ - $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~ - $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib' - ;; - *) # Version 6 and above use weak symbols - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib' - ;; - esac - - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir' - _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' - _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' - ;; - cxx*) - # Compaq C++ - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib ${wl}-retain-symbols-file $wl$export_symbols' - - runpath_var=LD_RUN_PATH - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' - _LT_TAGVAR(hardcode_libdir_separator, $1)=: - - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - # - # There doesn't appear to be a way to prevent this compiler from - # explicitly linking system object files so we need to strip them - # from the output so that they don't get included in the library - # dependencies. - output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "X$list" | $Xsed' - ;; - xl* | mpixl* | bgxl*) - # IBM XL 8.0 on PPC, with GNU ld - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' - _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' - _LT_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - if test "x$supports_anon_versioning" = xyes; then - _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~ - cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ - echo "local: *; };" >> $output_objdir/$libname.ver~ - $CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' - fi - ;; - *) - case `$CC -V 2>&1 | sed 5q` in - *Sun\ C*) - # Sun C++ 5.9 - _LT_TAGVAR(no_undefined_flag, $1)=' -zdefs' - _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file ${wl}$export_symbols' - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' - _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' - _LT_TAGVAR(compiler_needs_object, $1)=yes - - # Not sure whether something based on - # $CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 - # would be better. - output_verbose_link_cmd='func_echo_all' - - # Archives containing C++ object files must be created using - # "CC -xar", where "CC" is the Sun C++ compiler. This is - # necessary to make sure instantiated templates are included - # in the archive. - _LT_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs' - ;; - esac - ;; - esac - ;; - - lynxos*) - # FIXME: insert proper C++ library support - _LT_TAGVAR(ld_shlibs, $1)=no - ;; - - m88k*) - # FIXME: insert proper C++ library support - _LT_TAGVAR(ld_shlibs, $1)=no - ;; - - mvs*) - case $cc_basename in - cxx*) - # FIXME: insert proper C++ library support - _LT_TAGVAR(ld_shlibs, $1)=no - ;; - *) - # FIXME: insert proper C++ library support - _LT_TAGVAR(ld_shlibs, $1)=no - ;; - esac - ;; - - netbsd*) - if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then - _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags' - wlarc= - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' - _LT_TAGVAR(hardcode_direct, $1)=yes - _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - fi - # Workaround some broken pre-1.5 toolchains - output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"' - ;; - - *nto* | *qnx*) - _LT_TAGVAR(ld_shlibs, $1)=yes - ;; - - openbsd2*) - # C++ shared libraries are fairly broken - _LT_TAGVAR(ld_shlibs, $1)=no - ;; - - openbsd*) - if test -f /usr/libexec/ld.so; then - _LT_TAGVAR(hardcode_direct, $1)=yes - _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - _LT_TAGVAR(hardcode_direct_absolute, $1)=yes - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' - if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib' - _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' - _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' - fi - output_verbose_link_cmd=func_echo_all - else - _LT_TAGVAR(ld_shlibs, $1)=no - fi - ;; - - osf3* | osf4* | osf5*) - case $cc_basename in - KCC*) - # Kuck and Associates, Inc. (KAI) C++ Compiler - - # KCC will only create a shared library if the output file - # ends with ".so" (or ".sl" for HP-UX), so rename the library - # to its proper name (with version) after linking. - _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo "$lib" | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' - - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' - _LT_TAGVAR(hardcode_libdir_separator, $1)=: - - # Archives containing C++ object files must be created using - # the KAI C++ compiler. - case $host in - osf3*) _LT_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs' ;; - *) _LT_TAGVAR(old_archive_cmds, $1)='$CC -o $oldlib $oldobjs' ;; - esac - ;; - RCC*) - # Rational C++ 2.4.1 - # FIXME: insert proper C++ library support - _LT_TAGVAR(ld_shlibs, $1)=no - ;; - cxx*) - case $host in - osf3*) - _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' - _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && func_echo_all "${wl}-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' - ;; - *) - _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' - _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' - _LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~ - echo "-hidden">> $lib.exp~ - $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname ${wl}-input ${wl}$lib.exp `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~ - $RM $lib.exp' - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' - ;; - esac - - _LT_TAGVAR(hardcode_libdir_separator, $1)=: - - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - # - # There doesn't appear to be a way to prevent this compiler from - # explicitly linking system object files so we need to strip them - # from the output so that they don't get included in the library - # dependencies. - output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld" | $GREP -v "ld:"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"' - ;; - *) - if test "$GXX" = yes && test "$with_gnu_ld" = no; then - _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' - case $host in - osf3*) - _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' - ;; - *) - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' - ;; - esac - - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' - _LT_TAGVAR(hardcode_libdir_separator, $1)=: - - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"' - - else - # FIXME: insert proper C++ library support - _LT_TAGVAR(ld_shlibs, $1)=no - fi - ;; - esac - ;; - - psos*) - # FIXME: insert proper C++ library support - _LT_TAGVAR(ld_shlibs, $1)=no - ;; - - sunos4*) - case $cc_basename in - CC*) - # Sun C++ 4.x - # FIXME: insert proper C++ library support - _LT_TAGVAR(ld_shlibs, $1)=no - ;; - lcc*) - # Lucid - # FIXME: insert proper C++ library support - _LT_TAGVAR(ld_shlibs, $1)=no - ;; - *) - # FIXME: insert proper C++ library support - _LT_TAGVAR(ld_shlibs, $1)=no - ;; - esac - ;; - - solaris*) - case $cc_basename in - CC* | sunCC*) - # Sun C++ 4.2, 5.x and Centerline C++ - _LT_TAGVAR(archive_cmds_need_lc,$1)=yes - _LT_TAGVAR(no_undefined_flag, $1)=' -zdefs' - _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' - _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ - $CC -G${allow_undefined_flag} ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp' - - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' - _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - case $host_os in - solaris2.[[0-5]] | solaris2.[[0-5]].*) ;; - *) - # The compiler driver will combine and reorder linker options, - # but understands `-z linker_flag'. - # Supported since Solaris 2.6 (maybe 2.5.1?) - _LT_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract' - ;; - esac - _LT_TAGVAR(link_all_deplibs, $1)=yes - - output_verbose_link_cmd='func_echo_all' - - # Archives containing C++ object files must be created using - # "CC -xar", where "CC" is the Sun C++ compiler. This is - # necessary to make sure instantiated templates are included - # in the archive. - _LT_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs' - ;; - gcx*) - # Green Hills C++ Compiler - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' - - # The C++ compiler must be used to create the archive. - _LT_TAGVAR(old_archive_cmds, $1)='$CC $LDFLAGS -archive -o $oldlib $oldobjs' - ;; - *) - # GNU C++ compiler with Solaris linker - if test "$GXX" = yes && test "$with_gnu_ld" = no; then - _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-z ${wl}defs' - if $CC --version | $GREP -v '^2\.7' > /dev/null; then - _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' - _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ - $CC -shared $pic_flag -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp' - - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"' - else - # g++ 2.7 appears to require `-G' NOT `-shared' on this - # platform. - _LT_TAGVAR(archive_cmds, $1)='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' - _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ - $CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp' - - # Commands to make compiler produce verbose output that lists - # what "hidden" libraries, object files and flags are used when - # linking a shared library. - output_verbose_link_cmd='$CC -G $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"' - fi - - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $wl$libdir' - case $host_os in - solaris2.[[0-5]] | solaris2.[[0-5]].*) ;; - *) - _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' - ;; - esac - fi - ;; - esac - ;; - - sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*) - _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text' - _LT_TAGVAR(archive_cmds_need_lc, $1)=no - _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - runpath_var='LD_RUN_PATH' - - case $cc_basename in - CC*) - _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - ;; - *) - _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - ;; - esac - ;; - - sysv5* | sco3.2v5* | sco5v6*) - # Note: We can NOT use -z defs as we might desire, because we do not - # link with -lc, and that would cause any symbols used from libc to - # always be unresolved, which means just about no library would - # ever link correctly. If we're not using GNU ld we use -z text - # though, which does catch some bad symbols but isn't as heavy-handed - # as -z defs. - _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text' - _LT_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs' - _LT_TAGVAR(archive_cmds_need_lc, $1)=no - _LT_TAGVAR(hardcode_shlibpath_var, $1)=no - _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R,$libdir' - _LT_TAGVAR(hardcode_libdir_separator, $1)=':' - _LT_TAGVAR(link_all_deplibs, $1)=yes - _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport' - runpath_var='LD_RUN_PATH' - - case $cc_basename in - CC*) - _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - _LT_TAGVAR(old_archive_cmds, $1)='$CC -Tprelink_objects $oldobjs~ - '"$_LT_TAGVAR(old_archive_cmds, $1)" - _LT_TAGVAR(reload_cmds, $1)='$CC -Tprelink_objects $reload_objs~ - '"$_LT_TAGVAR(reload_cmds, $1)" - ;; - *) - _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - ;; - esac - ;; - - tandem*) - case $cc_basename in - NCC*) - # NonStop-UX NCC 3.20 - # FIXME: insert proper C++ library support - _LT_TAGVAR(ld_shlibs, $1)=no - ;; - *) - # FIXME: insert proper C++ library support - _LT_TAGVAR(ld_shlibs, $1)=no - ;; - esac - ;; - - vxworks*) - # FIXME: insert proper C++ library support - _LT_TAGVAR(ld_shlibs, $1)=no - ;; - - *) - # FIXME: insert proper C++ library support - _LT_TAGVAR(ld_shlibs, $1)=no - ;; - esac - - AC_MSG_RESULT([$_LT_TAGVAR(ld_shlibs, $1)]) - test "$_LT_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no - - _LT_TAGVAR(GCC, $1)="$GXX" - _LT_TAGVAR(LD, $1)="$LD" - - ## CAVEAT EMPTOR: - ## There is no encapsulation within the following macros, do not change - ## the running order or otherwise move them around unless you know exactly - ## what you are doing... - _LT_SYS_HIDDEN_LIBDEPS($1) - _LT_COMPILER_PIC($1) - _LT_COMPILER_C_O($1) - _LT_COMPILER_FILE_LOCKS($1) - _LT_LINKER_SHLIBS($1) - _LT_SYS_DYNAMIC_LINKER($1) - _LT_LINKER_HARDCODE_LIBPATH($1) - - _LT_CONFIG($1) - fi # test -n "$compiler" - - CC=$lt_save_CC - CFLAGS=$lt_save_CFLAGS - LDCXX=$LD - LD=$lt_save_LD - GCC=$lt_save_GCC - with_gnu_ld=$lt_save_with_gnu_ld - lt_cv_path_LDCXX=$lt_cv_path_LD - lt_cv_path_LD=$lt_save_path_LD - lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld - lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld -fi # test "$_lt_caught_CXX_error" != yes - -AC_LANG_POP -])# _LT_LANG_CXX_CONFIG - - -# _LT_FUNC_STRIPNAME_CNF -# ---------------------- -# func_stripname_cnf prefix suffix name -# strip PREFIX and SUFFIX off of NAME. -# PREFIX and SUFFIX must not contain globbing or regex special -# characters, hashes, percent signs, but SUFFIX may contain a leading -# dot (in which case that matches only a dot). -# -# This function is identical to the (non-XSI) version of func_stripname, -# except this one can be used by m4 code that may be executed by configure, -# rather than the libtool script. -m4_defun([_LT_FUNC_STRIPNAME_CNF],[dnl -AC_REQUIRE([_LT_DECL_SED]) -AC_REQUIRE([_LT_PROG_ECHO_BACKSLASH]) -func_stripname_cnf () -{ - case ${2} in - .*) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%\\\\${2}\$%%"`;; - *) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%${2}\$%%"`;; - esac -} # func_stripname_cnf -])# _LT_FUNC_STRIPNAME_CNF - -# _LT_SYS_HIDDEN_LIBDEPS([TAGNAME]) -# --------------------------------- -# Figure out "hidden" library dependencies from verbose -# compiler output when linking a shared library. -# Parse the compiler output and extract the necessary -# objects, libraries and library flags. -m4_defun([_LT_SYS_HIDDEN_LIBDEPS], -[m4_require([_LT_FILEUTILS_DEFAULTS])dnl -AC_REQUIRE([_LT_FUNC_STRIPNAME_CNF])dnl -# Dependencies to place before and after the object being linked: -_LT_TAGVAR(predep_objects, $1)= -_LT_TAGVAR(postdep_objects, $1)= -_LT_TAGVAR(predeps, $1)= -_LT_TAGVAR(postdeps, $1)= -_LT_TAGVAR(compiler_lib_search_path, $1)= - -dnl we can't use the lt_simple_compile_test_code here, -dnl because it contains code intended for an executable, -dnl not a library. It's possible we should let each -dnl tag define a new lt_????_link_test_code variable, -dnl but it's only used here... -m4_if([$1], [], [cat > conftest.$ac_ext <<_LT_EOF -int a; -void foo (void) { a = 0; } -_LT_EOF -], [$1], [CXX], [cat > conftest.$ac_ext <<_LT_EOF -class Foo -{ -public: - Foo (void) { a = 0; } -private: - int a; -}; -_LT_EOF -], [$1], [F77], [cat > conftest.$ac_ext <<_LT_EOF - subroutine foo - implicit none - integer*4 a - a=0 - return - end -_LT_EOF -], [$1], [FC], [cat > conftest.$ac_ext <<_LT_EOF - subroutine foo - implicit none - integer a - a=0 - return - end -_LT_EOF -], [$1], [GCJ], [cat > conftest.$ac_ext <<_LT_EOF -public class foo { - private int a; - public void bar (void) { - a = 0; - } -}; -_LT_EOF -]) - -_lt_libdeps_save_CFLAGS=$CFLAGS -case "$CC $CFLAGS " in #( -*\ -flto*\ *) CFLAGS="$CFLAGS -fno-lto" ;; -*\ -fwhopr*\ *) CFLAGS="$CFLAGS -fno-whopr" ;; -esac - -dnl Parse the compiler output and extract the necessary -dnl objects, libraries and library flags. -if AC_TRY_EVAL(ac_compile); then - # Parse the compiler output and extract the necessary - # objects, libraries and library flags. - - # Sentinel used to keep track of whether or not we are before - # the conftest object file. - pre_test_object_deps_done=no - - for p in `eval "$output_verbose_link_cmd"`; do - case ${prev}${p} in - - -L* | -R* | -l*) - # Some compilers place space between "-{L,R}" and the path. - # Remove the space. - if test $p = "-L" || - test $p = "-R"; then - prev=$p - continue - fi - - # Expand the sysroot to ease extracting the directories later. - if test -z "$prev"; then - case $p in - -L*) func_stripname_cnf '-L' '' "$p"; prev=-L; p=$func_stripname_result ;; - -R*) func_stripname_cnf '-R' '' "$p"; prev=-R; p=$func_stripname_result ;; - -l*) func_stripname_cnf '-l' '' "$p"; prev=-l; p=$func_stripname_result ;; - esac - fi - case $p in - =*) func_stripname_cnf '=' '' "$p"; p=$lt_sysroot$func_stripname_result ;; - esac - if test "$pre_test_object_deps_done" = no; then - case ${prev} in - -L | -R) - # Internal compiler library paths should come after those - # provided the user. The postdeps already come after the - # user supplied libs so there is no need to process them. - if test -z "$_LT_TAGVAR(compiler_lib_search_path, $1)"; then - _LT_TAGVAR(compiler_lib_search_path, $1)="${prev}${p}" - else - _LT_TAGVAR(compiler_lib_search_path, $1)="${_LT_TAGVAR(compiler_lib_search_path, $1)} ${prev}${p}" - fi - ;; - # The "-l" case would never come before the object being - # linked, so don't bother handling this case. - esac - else - if test -z "$_LT_TAGVAR(postdeps, $1)"; then - _LT_TAGVAR(postdeps, $1)="${prev}${p}" - else - _LT_TAGVAR(postdeps, $1)="${_LT_TAGVAR(postdeps, $1)} ${prev}${p}" - fi - fi - prev= - ;; - - *.lto.$objext) ;; # Ignore GCC LTO objects - *.$objext) - # This assumes that the test object file only shows up - # once in the compiler output. - if test "$p" = "conftest.$objext"; then - pre_test_object_deps_done=yes - continue - fi - - if test "$pre_test_object_deps_done" = no; then - if test -z "$_LT_TAGVAR(predep_objects, $1)"; then - _LT_TAGVAR(predep_objects, $1)="$p" - else - _LT_TAGVAR(predep_objects, $1)="$_LT_TAGVAR(predep_objects, $1) $p" - fi - else - if test -z "$_LT_TAGVAR(postdep_objects, $1)"; then - _LT_TAGVAR(postdep_objects, $1)="$p" - else - _LT_TAGVAR(postdep_objects, $1)="$_LT_TAGVAR(postdep_objects, $1) $p" - fi - fi - ;; - - *) ;; # Ignore the rest. - - esac - done - - # Clean up. - rm -f a.out a.exe -else - echo "libtool.m4: error: problem compiling $1 test program" -fi - -$RM -f confest.$objext -CFLAGS=$_lt_libdeps_save_CFLAGS - -# PORTME: override above test on systems where it is broken -m4_if([$1], [CXX], -[case $host_os in -interix[[3-9]]*) - # Interix 3.5 installs completely hosed .la files for C++, so rather than - # hack all around it, let's just trust "g++" to DTRT. - _LT_TAGVAR(predep_objects,$1)= - _LT_TAGVAR(postdep_objects,$1)= - _LT_TAGVAR(postdeps,$1)= - ;; - -linux*) - case `$CC -V 2>&1 | sed 5q` in - *Sun\ C*) - # Sun C++ 5.9 - - # The more standards-conforming stlport4 library is - # incompatible with the Cstd library. Avoid specifying - # it if it's in CXXFLAGS. Ignore libCrun as - # -library=stlport4 depends on it. - case " $CXX $CXXFLAGS " in - *" -library=stlport4 "*) - solaris_use_stlport4=yes - ;; - esac - - if test "$solaris_use_stlport4" != yes; then - _LT_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun' - fi - ;; - esac - ;; - -solaris*) - case $cc_basename in - CC* | sunCC*) - # The more standards-conforming stlport4 library is - # incompatible with the Cstd library. Avoid specifying - # it if it's in CXXFLAGS. Ignore libCrun as - # -library=stlport4 depends on it. - case " $CXX $CXXFLAGS " in - *" -library=stlport4 "*) - solaris_use_stlport4=yes - ;; - esac - - # Adding this requires a known-good setup of shared libraries for - # Sun compiler versions before 5.6, else PIC objects from an old - # archive will be linked into the output, leading to subtle bugs. - if test "$solaris_use_stlport4" != yes; then - _LT_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun' - fi - ;; - esac - ;; -esac -]) - -case " $_LT_TAGVAR(postdeps, $1) " in -*" -lc "*) _LT_TAGVAR(archive_cmds_need_lc, $1)=no ;; -esac - _LT_TAGVAR(compiler_lib_search_dirs, $1)= -if test -n "${_LT_TAGVAR(compiler_lib_search_path, $1)}"; then - _LT_TAGVAR(compiler_lib_search_dirs, $1)=`echo " ${_LT_TAGVAR(compiler_lib_search_path, $1)}" | ${SED} -e 's! -L! !g' -e 's!^ !!'` -fi -_LT_TAGDECL([], [compiler_lib_search_dirs], [1], - [The directories searched by this compiler when creating a shared library]) -_LT_TAGDECL([], [predep_objects], [1], - [Dependencies to place before and after the objects being linked to - create a shared library]) -_LT_TAGDECL([], [postdep_objects], [1]) -_LT_TAGDECL([], [predeps], [1]) -_LT_TAGDECL([], [postdeps], [1]) -_LT_TAGDECL([], [compiler_lib_search_path], [1], - [The library search path used internally by the compiler when linking - a shared library]) -])# _LT_SYS_HIDDEN_LIBDEPS - - -# _LT_LANG_F77_CONFIG([TAG]) -# -------------------------- -# Ensure that the configuration variables for a Fortran 77 compiler are -# suitably defined. These variables are subsequently used by _LT_CONFIG -# to write the compiler configuration to `libtool'. -m4_defun([_LT_LANG_F77_CONFIG], -[AC_LANG_PUSH(Fortran 77) -if test -z "$F77" || test "X$F77" = "Xno"; then - _lt_disable_F77=yes -fi - -_LT_TAGVAR(archive_cmds_need_lc, $1)=no -_LT_TAGVAR(allow_undefined_flag, $1)= -_LT_TAGVAR(always_export_symbols, $1)=no -_LT_TAGVAR(archive_expsym_cmds, $1)= -_LT_TAGVAR(export_dynamic_flag_spec, $1)= -_LT_TAGVAR(hardcode_direct, $1)=no -_LT_TAGVAR(hardcode_direct_absolute, $1)=no -_LT_TAGVAR(hardcode_libdir_flag_spec, $1)= -_LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)= -_LT_TAGVAR(hardcode_libdir_separator, $1)= -_LT_TAGVAR(hardcode_minus_L, $1)=no -_LT_TAGVAR(hardcode_automatic, $1)=no -_LT_TAGVAR(inherit_rpath, $1)=no -_LT_TAGVAR(module_cmds, $1)= -_LT_TAGVAR(module_expsym_cmds, $1)= -_LT_TAGVAR(link_all_deplibs, $1)=unknown -_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds -_LT_TAGVAR(reload_flag, $1)=$reload_flag -_LT_TAGVAR(reload_cmds, $1)=$reload_cmds -_LT_TAGVAR(no_undefined_flag, $1)= -_LT_TAGVAR(whole_archive_flag_spec, $1)= -_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no - -# Source file extension for f77 test sources. -ac_ext=f - -# Object file extension for compiled f77 test sources. -objext=o -_LT_TAGVAR(objext, $1)=$objext - -# No sense in running all these tests if we already determined that -# the F77 compiler isn't working. Some variables (like enable_shared) -# are currently assumed to apply to all compilers on this platform, -# and will be corrupted by setting them based on a non-working compiler. -if test "$_lt_disable_F77" != yes; then - # Code to be used in simple compile tests - lt_simple_compile_test_code="\ - subroutine t - return - end -" - - # Code to be used in simple link tests - lt_simple_link_test_code="\ - program t - end -" - - # ltmain only uses $CC for tagged configurations so make sure $CC is set. - _LT_TAG_COMPILER - - # save warnings/boilerplate of simple test code - _LT_COMPILER_BOILERPLATE - _LT_LINKER_BOILERPLATE - - # Allow CC to be a program name with arguments. - lt_save_CC="$CC" - lt_save_GCC=$GCC - lt_save_CFLAGS=$CFLAGS - CC=${F77-"f77"} - CFLAGS=$FFLAGS - compiler=$CC - _LT_TAGVAR(compiler, $1)=$CC - _LT_CC_BASENAME([$compiler]) - GCC=$G77 - if test -n "$compiler"; then - AC_MSG_CHECKING([if libtool supports shared libraries]) - AC_MSG_RESULT([$can_build_shared]) - - AC_MSG_CHECKING([whether to build shared libraries]) - test "$can_build_shared" = "no" && enable_shared=no - - # On AIX, shared libraries and static libraries use the same namespace, and - # are all built from PIC. - case $host_os in - aix3*) - test "$enable_shared" = yes && enable_static=no - if test -n "$RANLIB"; then - archive_cmds="$archive_cmds~\$RANLIB \$lib" - postinstall_cmds='$RANLIB $lib' - fi - ;; - aix[[4-9]]*) - if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then - test "$enable_shared" = yes && enable_static=no - fi - ;; - esac - AC_MSG_RESULT([$enable_shared]) - - AC_MSG_CHECKING([whether to build static libraries]) - # Make sure either enable_shared or enable_static is yes. - test "$enable_shared" = yes || enable_static=yes - AC_MSG_RESULT([$enable_static]) - - _LT_TAGVAR(GCC, $1)="$G77" - _LT_TAGVAR(LD, $1)="$LD" - - ## CAVEAT EMPTOR: - ## There is no encapsulation within the following macros, do not change - ## the running order or otherwise move them around unless you know exactly - ## what you are doing... - _LT_COMPILER_PIC($1) - _LT_COMPILER_C_O($1) - _LT_COMPILER_FILE_LOCKS($1) - _LT_LINKER_SHLIBS($1) - _LT_SYS_DYNAMIC_LINKER($1) - _LT_LINKER_HARDCODE_LIBPATH($1) - - _LT_CONFIG($1) - fi # test -n "$compiler" - - GCC=$lt_save_GCC - CC="$lt_save_CC" - CFLAGS="$lt_save_CFLAGS" -fi # test "$_lt_disable_F77" != yes - -AC_LANG_POP -])# _LT_LANG_F77_CONFIG - - -# _LT_LANG_FC_CONFIG([TAG]) -# ------------------------- -# Ensure that the configuration variables for a Fortran compiler are -# suitably defined. These variables are subsequently used by _LT_CONFIG -# to write the compiler configuration to `libtool'. -m4_defun([_LT_LANG_FC_CONFIG], -[AC_LANG_PUSH(Fortran) - -if test -z "$FC" || test "X$FC" = "Xno"; then - _lt_disable_FC=yes -fi - -_LT_TAGVAR(archive_cmds_need_lc, $1)=no -_LT_TAGVAR(allow_undefined_flag, $1)= -_LT_TAGVAR(always_export_symbols, $1)=no -_LT_TAGVAR(archive_expsym_cmds, $1)= -_LT_TAGVAR(export_dynamic_flag_spec, $1)= -_LT_TAGVAR(hardcode_direct, $1)=no -_LT_TAGVAR(hardcode_direct_absolute, $1)=no -_LT_TAGVAR(hardcode_libdir_flag_spec, $1)= -_LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)= -_LT_TAGVAR(hardcode_libdir_separator, $1)= -_LT_TAGVAR(hardcode_minus_L, $1)=no -_LT_TAGVAR(hardcode_automatic, $1)=no -_LT_TAGVAR(inherit_rpath, $1)=no -_LT_TAGVAR(module_cmds, $1)= -_LT_TAGVAR(module_expsym_cmds, $1)= -_LT_TAGVAR(link_all_deplibs, $1)=unknown -_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds -_LT_TAGVAR(reload_flag, $1)=$reload_flag -_LT_TAGVAR(reload_cmds, $1)=$reload_cmds -_LT_TAGVAR(no_undefined_flag, $1)= -_LT_TAGVAR(whole_archive_flag_spec, $1)= -_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no - -# Source file extension for fc test sources. -ac_ext=${ac_fc_srcext-f} - -# Object file extension for compiled fc test sources. -objext=o -_LT_TAGVAR(objext, $1)=$objext - -# No sense in running all these tests if we already determined that -# the FC compiler isn't working. Some variables (like enable_shared) -# are currently assumed to apply to all compilers on this platform, -# and will be corrupted by setting them based on a non-working compiler. -if test "$_lt_disable_FC" != yes; then - # Code to be used in simple compile tests - lt_simple_compile_test_code="\ - subroutine t - return - end -" - - # Code to be used in simple link tests - lt_simple_link_test_code="\ - program t - end -" - - # ltmain only uses $CC for tagged configurations so make sure $CC is set. - _LT_TAG_COMPILER - - # save warnings/boilerplate of simple test code - _LT_COMPILER_BOILERPLATE - _LT_LINKER_BOILERPLATE - - # Allow CC to be a program name with arguments. - lt_save_CC="$CC" - lt_save_GCC=$GCC - lt_save_CFLAGS=$CFLAGS - CC=${FC-"f95"} - CFLAGS=$FCFLAGS - compiler=$CC - GCC=$ac_cv_fc_compiler_gnu - - _LT_TAGVAR(compiler, $1)=$CC - _LT_CC_BASENAME([$compiler]) - - if test -n "$compiler"; then - AC_MSG_CHECKING([if libtool supports shared libraries]) - AC_MSG_RESULT([$can_build_shared]) - - AC_MSG_CHECKING([whether to build shared libraries]) - test "$can_build_shared" = "no" && enable_shared=no - - # On AIX, shared libraries and static libraries use the same namespace, and - # are all built from PIC. - case $host_os in - aix3*) - test "$enable_shared" = yes && enable_static=no - if test -n "$RANLIB"; then - archive_cmds="$archive_cmds~\$RANLIB \$lib" - postinstall_cmds='$RANLIB $lib' - fi - ;; - aix[[4-9]]*) - if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then - test "$enable_shared" = yes && enable_static=no - fi - ;; - esac - AC_MSG_RESULT([$enable_shared]) - - AC_MSG_CHECKING([whether to build static libraries]) - # Make sure either enable_shared or enable_static is yes. - test "$enable_shared" = yes || enable_static=yes - AC_MSG_RESULT([$enable_static]) - - _LT_TAGVAR(GCC, $1)="$ac_cv_fc_compiler_gnu" - _LT_TAGVAR(LD, $1)="$LD" - - ## CAVEAT EMPTOR: - ## There is no encapsulation within the following macros, do not change - ## the running order or otherwise move them around unless you know exactly - ## what you are doing... - _LT_SYS_HIDDEN_LIBDEPS($1) - _LT_COMPILER_PIC($1) - _LT_COMPILER_C_O($1) - _LT_COMPILER_FILE_LOCKS($1) - _LT_LINKER_SHLIBS($1) - _LT_SYS_DYNAMIC_LINKER($1) - _LT_LINKER_HARDCODE_LIBPATH($1) - - _LT_CONFIG($1) - fi # test -n "$compiler" - - GCC=$lt_save_GCC - CC=$lt_save_CC - CFLAGS=$lt_save_CFLAGS -fi # test "$_lt_disable_FC" != yes - -AC_LANG_POP -])# _LT_LANG_FC_CONFIG - - -# _LT_LANG_GCJ_CONFIG([TAG]) -# -------------------------- -# Ensure that the configuration variables for the GNU Java Compiler compiler -# are suitably defined. These variables are subsequently used by _LT_CONFIG -# to write the compiler configuration to `libtool'. -m4_defun([_LT_LANG_GCJ_CONFIG], -[AC_REQUIRE([LT_PROG_GCJ])dnl -AC_LANG_SAVE - -# Source file extension for Java test sources. -ac_ext=java - -# Object file extension for compiled Java test sources. -objext=o -_LT_TAGVAR(objext, $1)=$objext - -# Code to be used in simple compile tests -lt_simple_compile_test_code="class foo {}" - -# Code to be used in simple link tests -lt_simple_link_test_code='public class conftest { public static void main(String[[]] argv) {}; }' - -# ltmain only uses $CC for tagged configurations so make sure $CC is set. -_LT_TAG_COMPILER - -# save warnings/boilerplate of simple test code -_LT_COMPILER_BOILERPLATE -_LT_LINKER_BOILERPLATE - -# Allow CC to be a program name with arguments. -lt_save_CC=$CC -lt_save_CFLAGS=$CFLAGS -lt_save_GCC=$GCC -GCC=yes -CC=${GCJ-"gcj"} -CFLAGS=$GCJFLAGS -compiler=$CC -_LT_TAGVAR(compiler, $1)=$CC -_LT_TAGVAR(LD, $1)="$LD" -_LT_CC_BASENAME([$compiler]) - -# GCJ did not exist at the time GCC didn't implicitly link libc in. -_LT_TAGVAR(archive_cmds_need_lc, $1)=no - -_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds -_LT_TAGVAR(reload_flag, $1)=$reload_flag -_LT_TAGVAR(reload_cmds, $1)=$reload_cmds - -if test -n "$compiler"; then - _LT_COMPILER_NO_RTTI($1) - _LT_COMPILER_PIC($1) - _LT_COMPILER_C_O($1) - _LT_COMPILER_FILE_LOCKS($1) - _LT_LINKER_SHLIBS($1) - _LT_LINKER_HARDCODE_LIBPATH($1) - - _LT_CONFIG($1) -fi - -AC_LANG_RESTORE - -GCC=$lt_save_GCC -CC=$lt_save_CC -CFLAGS=$lt_save_CFLAGS -])# _LT_LANG_GCJ_CONFIG - - -# _LT_LANG_RC_CONFIG([TAG]) -# ------------------------- -# Ensure that the configuration variables for the Windows resource compiler -# are suitably defined. These variables are subsequently used by _LT_CONFIG -# to write the compiler configuration to `libtool'. -m4_defun([_LT_LANG_RC_CONFIG], -[AC_REQUIRE([LT_PROG_RC])dnl -AC_LANG_SAVE - -# Source file extension for RC test sources. -ac_ext=rc - -# Object file extension for compiled RC test sources. -objext=o -_LT_TAGVAR(objext, $1)=$objext - -# Code to be used in simple compile tests -lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }' - -# Code to be used in simple link tests -lt_simple_link_test_code="$lt_simple_compile_test_code" - -# ltmain only uses $CC for tagged configurations so make sure $CC is set. -_LT_TAG_COMPILER - -# save warnings/boilerplate of simple test code -_LT_COMPILER_BOILERPLATE -_LT_LINKER_BOILERPLATE - -# Allow CC to be a program name with arguments. -lt_save_CC="$CC" -lt_save_CFLAGS=$CFLAGS -lt_save_GCC=$GCC -GCC= -CC=${RC-"windres"} -CFLAGS= -compiler=$CC -_LT_TAGVAR(compiler, $1)=$CC -_LT_CC_BASENAME([$compiler]) -_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes - -if test -n "$compiler"; then - : - _LT_CONFIG($1) -fi - -GCC=$lt_save_GCC -AC_LANG_RESTORE -CC=$lt_save_CC -CFLAGS=$lt_save_CFLAGS -])# _LT_LANG_RC_CONFIG - - -# LT_PROG_GCJ -# ----------- -AC_DEFUN([LT_PROG_GCJ], -[m4_ifdef([AC_PROG_GCJ], [AC_PROG_GCJ], - [m4_ifdef([A][M_PROG_GCJ], [A][M_PROG_GCJ], - [AC_CHECK_TOOL(GCJ, gcj,) - test "x${GCJFLAGS+set}" = xset || GCJFLAGS="-g -O2" - AC_SUBST(GCJFLAGS)])])[]dnl -]) - -# Old name: -AU_ALIAS([LT_AC_PROG_GCJ], [LT_PROG_GCJ]) -dnl aclocal-1.4 backwards compatibility: -dnl AC_DEFUN([LT_AC_PROG_GCJ], []) - - -# LT_PROG_RC -# ---------- -AC_DEFUN([LT_PROG_RC], -[AC_CHECK_TOOL(RC, windres,) -]) - -# Old name: -AU_ALIAS([LT_AC_PROG_RC], [LT_PROG_RC]) -dnl aclocal-1.4 backwards compatibility: -dnl AC_DEFUN([LT_AC_PROG_RC], []) - - -# _LT_DECL_EGREP -# -------------- -# If we don't have a new enough Autoconf to choose the best grep -# available, choose the one first in the user's PATH. -m4_defun([_LT_DECL_EGREP], -[AC_REQUIRE([AC_PROG_EGREP])dnl -AC_REQUIRE([AC_PROG_FGREP])dnl -test -z "$GREP" && GREP=grep -_LT_DECL([], [GREP], [1], [A grep program that handles long lines]) -_LT_DECL([], [EGREP], [1], [An ERE matcher]) -_LT_DECL([], [FGREP], [1], [A literal string matcher]) -dnl Non-bleeding-edge autoconf doesn't subst GREP, so do it here too -AC_SUBST([GREP]) -]) - - -# _LT_DECL_OBJDUMP -# -------------- -# If we don't have a new enough Autoconf to choose the best objdump -# available, choose the one first in the user's PATH. -m4_defun([_LT_DECL_OBJDUMP], -[AC_CHECK_TOOL(OBJDUMP, objdump, false) -test -z "$OBJDUMP" && OBJDUMP=objdump -_LT_DECL([], [OBJDUMP], [1], [An object symbol dumper]) -AC_SUBST([OBJDUMP]) -]) - -# _LT_DECL_DLLTOOL -# ---------------- -# Ensure DLLTOOL variable is set. -m4_defun([_LT_DECL_DLLTOOL], -[AC_CHECK_TOOL(DLLTOOL, dlltool, false) -test -z "$DLLTOOL" && DLLTOOL=dlltool -_LT_DECL([], [DLLTOOL], [1], [DLL creation program]) -AC_SUBST([DLLTOOL]) -]) - -# _LT_DECL_SED -# ------------ -# Check for a fully-functional sed program, that truncates -# as few characters as possible. Prefer GNU sed if found. -m4_defun([_LT_DECL_SED], -[AC_PROG_SED -test -z "$SED" && SED=sed -Xsed="$SED -e 1s/^X//" -_LT_DECL([], [SED], [1], [A sed program that does not truncate output]) -_LT_DECL([], [Xsed], ["\$SED -e 1s/^X//"], - [Sed that helps us avoid accidentally triggering echo(1) options like -n]) -])# _LT_DECL_SED - -m4_ifndef([AC_PROG_SED], [ -# NOTE: This macro has been submitted for inclusion into # -# GNU Autoconf as AC_PROG_SED. When it is available in # -# a released version of Autoconf we should remove this # -# macro and use it instead. # - -m4_defun([AC_PROG_SED], -[AC_MSG_CHECKING([for a sed that does not truncate output]) -AC_CACHE_VAL(lt_cv_path_SED, -[# Loop through the user's path and test for sed and gsed. -# Then use that list of sed's as ones to test for truncation. -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for lt_ac_prog in sed gsed; do - for ac_exec_ext in '' $ac_executable_extensions; do - if $as_executable_p "$as_dir/$lt_ac_prog$ac_exec_ext"; then - lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext" - fi - done - done -done -IFS=$as_save_IFS -lt_ac_max=0 -lt_ac_count=0 -# Add /usr/xpg4/bin/sed as it is typically found on Solaris -# along with /bin/sed that truncates output. -for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do - test ! -f $lt_ac_sed && continue - cat /dev/null > conftest.in - lt_ac_count=0 - echo $ECHO_N "0123456789$ECHO_C" >conftest.in - # Check for GNU sed and select it if it is found. - if "$lt_ac_sed" --version 2>&1 < /dev/null | grep 'GNU' > /dev/null; then - lt_cv_path_SED=$lt_ac_sed - break - fi - while true; do - cat conftest.in conftest.in >conftest.tmp - mv conftest.tmp conftest.in - cp conftest.in conftest.nl - echo >>conftest.nl - $lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break - cmp -s conftest.out conftest.nl || break - # 10000 chars as input seems more than enough - test $lt_ac_count -gt 10 && break - lt_ac_count=`expr $lt_ac_count + 1` - if test $lt_ac_count -gt $lt_ac_max; then - lt_ac_max=$lt_ac_count - lt_cv_path_SED=$lt_ac_sed - fi - done -done -]) -SED=$lt_cv_path_SED -AC_SUBST([SED]) -AC_MSG_RESULT([$SED]) -])#AC_PROG_SED -])#m4_ifndef - -# Old name: -AU_ALIAS([LT_AC_PROG_SED], [AC_PROG_SED]) -dnl aclocal-1.4 backwards compatibility: -dnl AC_DEFUN([LT_AC_PROG_SED], []) - - -# _LT_CHECK_SHELL_FEATURES -# ------------------------ -# Find out whether the shell is Bourne or XSI compatible, -# or has some other useful features. -m4_defun([_LT_CHECK_SHELL_FEATURES], -[AC_MSG_CHECKING([whether the shell understands some XSI constructs]) -# Try some XSI features -xsi_shell=no -( _lt_dummy="a/b/c" - test "${_lt_dummy##*/},${_lt_dummy%/*},${_lt_dummy#??}"${_lt_dummy%"$_lt_dummy"}, \ - = c,a/b,b/c, \ - && eval 'test $(( 1 + 1 )) -eq 2 \ - && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \ - && xsi_shell=yes -AC_MSG_RESULT([$xsi_shell]) -_LT_CONFIG_LIBTOOL_INIT([xsi_shell='$xsi_shell']) - -AC_MSG_CHECKING([whether the shell understands "+="]) -lt_shell_append=no -( foo=bar; set foo baz; eval "$[1]+=\$[2]" && test "$foo" = barbaz ) \ - >/dev/null 2>&1 \ - && lt_shell_append=yes -AC_MSG_RESULT([$lt_shell_append]) -_LT_CONFIG_LIBTOOL_INIT([lt_shell_append='$lt_shell_append']) - -if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then - lt_unset=unset -else - lt_unset=false -fi -_LT_DECL([], [lt_unset], [0], [whether the shell understands "unset"])dnl - -# test EBCDIC or ASCII -case `echo X|tr X '\101'` in - A) # ASCII based system - # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr - lt_SP2NL='tr \040 \012' - lt_NL2SP='tr \015\012 \040\040' - ;; - *) # EBCDIC based system - lt_SP2NL='tr \100 \n' - lt_NL2SP='tr \r\n \100\100' - ;; -esac -_LT_DECL([SP2NL], [lt_SP2NL], [1], [turn spaces into newlines])dnl -_LT_DECL([NL2SP], [lt_NL2SP], [1], [turn newlines into spaces])dnl -])# _LT_CHECK_SHELL_FEATURES - - -# _LT_PROG_FUNCTION_REPLACE (FUNCNAME, REPLACEMENT-BODY) -# ------------------------------------------------------ -# In `$cfgfile', look for function FUNCNAME delimited by `^FUNCNAME ()$' and -# '^} FUNCNAME ', and replace its body with REPLACEMENT-BODY. -m4_defun([_LT_PROG_FUNCTION_REPLACE], -[dnl { -sed -e '/^$1 ()$/,/^} # $1 /c\ -$1 ()\ -{\ -m4_bpatsubsts([$2], [$], [\\], [^\([ ]\)], [\\\1]) -} # Extended-shell $1 implementation' "$cfgfile" > $cfgfile.tmp \ - && mv -f "$cfgfile.tmp" "$cfgfile" \ - || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") -test 0 -eq $? || _lt_function_replace_fail=: -]) - - -# _LT_PROG_REPLACE_SHELLFNS -# ------------------------- -# Replace existing portable implementations of several shell functions with -# equivalent extended shell implementations where those features are available.. -m4_defun([_LT_PROG_REPLACE_SHELLFNS], -[if test x"$xsi_shell" = xyes; then - _LT_PROG_FUNCTION_REPLACE([func_dirname], [dnl - case ${1} in - */*) func_dirname_result="${1%/*}${2}" ;; - * ) func_dirname_result="${3}" ;; - esac]) - - _LT_PROG_FUNCTION_REPLACE([func_basename], [dnl - func_basename_result="${1##*/}"]) - - _LT_PROG_FUNCTION_REPLACE([func_dirname_and_basename], [dnl - case ${1} in - */*) func_dirname_result="${1%/*}${2}" ;; - * ) func_dirname_result="${3}" ;; - esac - func_basename_result="${1##*/}"]) - - _LT_PROG_FUNCTION_REPLACE([func_stripname], [dnl - # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are - # positional parameters, so assign one to ordinary parameter first. - func_stripname_result=${3} - func_stripname_result=${func_stripname_result#"${1}"} - func_stripname_result=${func_stripname_result%"${2}"}]) - - _LT_PROG_FUNCTION_REPLACE([func_split_long_opt], [dnl - func_split_long_opt_name=${1%%=*} - func_split_long_opt_arg=${1#*=}]) - - _LT_PROG_FUNCTION_REPLACE([func_split_short_opt], [dnl - func_split_short_opt_arg=${1#??} - func_split_short_opt_name=${1%"$func_split_short_opt_arg"}]) - - _LT_PROG_FUNCTION_REPLACE([func_lo2o], [dnl - case ${1} in - *.lo) func_lo2o_result=${1%.lo}.${objext} ;; - *) func_lo2o_result=${1} ;; - esac]) - - _LT_PROG_FUNCTION_REPLACE([func_xform], [ func_xform_result=${1%.*}.lo]) - - _LT_PROG_FUNCTION_REPLACE([func_arith], [ func_arith_result=$(( $[*] ))]) - - _LT_PROG_FUNCTION_REPLACE([func_len], [ func_len_result=${#1}]) -fi - -if test x"$lt_shell_append" = xyes; then - _LT_PROG_FUNCTION_REPLACE([func_append], [ eval "${1}+=\\${2}"]) - - _LT_PROG_FUNCTION_REPLACE([func_append_quoted], [dnl - func_quote_for_eval "${2}" -dnl m4 expansion turns \\\\ into \\, and then the shell eval turns that into \ - eval "${1}+=\\\\ \\$func_quote_for_eval_result"]) - - # Save a `func_append' function call where possible by direct use of '+=' - sed -e 's%func_append \([[a-zA-Z_]]\{1,\}\) "%\1+="%g' $cfgfile > $cfgfile.tmp \ - && mv -f "$cfgfile.tmp" "$cfgfile" \ - || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") - test 0 -eq $? || _lt_function_replace_fail=: -else - # Save a `func_append' function call even when '+=' is not available - sed -e 's%func_append \([[a-zA-Z_]]\{1,\}\) "%\1="$\1%g' $cfgfile > $cfgfile.tmp \ - && mv -f "$cfgfile.tmp" "$cfgfile" \ - || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") - test 0 -eq $? || _lt_function_replace_fail=: -fi - -if test x"$_lt_function_replace_fail" = x":"; then - AC_MSG_WARN([Unable to substitute extended shell functions in $ofile]) -fi -]) - -# _LT_PATH_CONVERSION_FUNCTIONS -# ----------------------------- -# Determine which file name conversion functions should be used by -# func_to_host_file (and, implicitly, by func_to_host_path). These are needed -# for certain cross-compile configurations and native mingw. -m4_defun([_LT_PATH_CONVERSION_FUNCTIONS], -[AC_REQUIRE([AC_CANONICAL_HOST])dnl -AC_REQUIRE([AC_CANONICAL_BUILD])dnl -AC_MSG_CHECKING([how to convert $build file names to $host format]) -AC_CACHE_VAL(lt_cv_to_host_file_cmd, -[case $host in - *-*-mingw* ) - case $build in - *-*-mingw* ) # actually msys - lt_cv_to_host_file_cmd=func_convert_file_msys_to_w32 - ;; - *-*-cygwin* ) - lt_cv_to_host_file_cmd=func_convert_file_cygwin_to_w32 - ;; - * ) # otherwise, assume *nix - lt_cv_to_host_file_cmd=func_convert_file_nix_to_w32 - ;; - esac - ;; - *-*-cygwin* ) - case $build in - *-*-mingw* ) # actually msys - lt_cv_to_host_file_cmd=func_convert_file_msys_to_cygwin - ;; - *-*-cygwin* ) - lt_cv_to_host_file_cmd=func_convert_file_noop - ;; - * ) # otherwise, assume *nix - lt_cv_to_host_file_cmd=func_convert_file_nix_to_cygwin - ;; - esac - ;; - * ) # unhandled hosts (and "normal" native builds) - lt_cv_to_host_file_cmd=func_convert_file_noop - ;; -esac -]) -to_host_file_cmd=$lt_cv_to_host_file_cmd -AC_MSG_RESULT([$lt_cv_to_host_file_cmd]) -_LT_DECL([to_host_file_cmd], [lt_cv_to_host_file_cmd], - [0], [convert $build file names to $host format])dnl - -AC_MSG_CHECKING([how to convert $build file names to toolchain format]) -AC_CACHE_VAL(lt_cv_to_tool_file_cmd, -[#assume ordinary cross tools, or native build. -lt_cv_to_tool_file_cmd=func_convert_file_noop -case $host in - *-*-mingw* ) - case $build in - *-*-mingw* ) # actually msys - lt_cv_to_tool_file_cmd=func_convert_file_msys_to_w32 - ;; - esac - ;; -esac -]) -to_tool_file_cmd=$lt_cv_to_tool_file_cmd -AC_MSG_RESULT([$lt_cv_to_tool_file_cmd]) -_LT_DECL([to_tool_file_cmd], [lt_cv_to_tool_file_cmd], - [0], [convert $build files to toolchain format])dnl -])# _LT_PATH_CONVERSION_FUNCTIONS - -# Helper functions for option handling. -*- Autoconf -*- -# -# Copyright (C) 2004, 2005, 2007, 2008, 2009 Free Software Foundation, -# Inc. -# Written by Gary V. Vaughan, 2004 -# -# This file is free software; the Free Software Foundation gives -# unlimited permission to copy and/or distribute it, with or without -# modifications, as long as this notice is preserved. - -# serial 7 ltoptions.m4 - -# This is to help aclocal find these macros, as it can't see m4_define. -AC_DEFUN([LTOPTIONS_VERSION], [m4_if([1])]) - - -# _LT_MANGLE_OPTION(MACRO-NAME, OPTION-NAME) -# ------------------------------------------ -m4_define([_LT_MANGLE_OPTION], -[[_LT_OPTION_]m4_bpatsubst($1__$2, [[^a-zA-Z0-9_]], [_])]) - - -# _LT_SET_OPTION(MACRO-NAME, OPTION-NAME) -# --------------------------------------- -# Set option OPTION-NAME for macro MACRO-NAME, and if there is a -# matching handler defined, dispatch to it. Other OPTION-NAMEs are -# saved as a flag. -m4_define([_LT_SET_OPTION], -[m4_define(_LT_MANGLE_OPTION([$1], [$2]))dnl -m4_ifdef(_LT_MANGLE_DEFUN([$1], [$2]), - _LT_MANGLE_DEFUN([$1], [$2]), - [m4_warning([Unknown $1 option `$2'])])[]dnl -]) - - -# _LT_IF_OPTION(MACRO-NAME, OPTION-NAME, IF-SET, [IF-NOT-SET]) -# ------------------------------------------------------------ -# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise. -m4_define([_LT_IF_OPTION], -[m4_ifdef(_LT_MANGLE_OPTION([$1], [$2]), [$3], [$4])]) - - -# _LT_UNLESS_OPTIONS(MACRO-NAME, OPTION-LIST, IF-NOT-SET) -# ------------------------------------------------------- -# Execute IF-NOT-SET unless all options in OPTION-LIST for MACRO-NAME -# are set. -m4_define([_LT_UNLESS_OPTIONS], -[m4_foreach([_LT_Option], m4_split(m4_normalize([$2])), - [m4_ifdef(_LT_MANGLE_OPTION([$1], _LT_Option), - [m4_define([$0_found])])])[]dnl -m4_ifdef([$0_found], [m4_undefine([$0_found])], [$3 -])[]dnl -]) - - -# _LT_SET_OPTIONS(MACRO-NAME, OPTION-LIST) -# ---------------------------------------- -# OPTION-LIST is a space-separated list of Libtool options associated -# with MACRO-NAME. If any OPTION has a matching handler declared with -# LT_OPTION_DEFINE, dispatch to that macro; otherwise complain about -# the unknown option and exit. -m4_defun([_LT_SET_OPTIONS], -[# Set options -m4_foreach([_LT_Option], m4_split(m4_normalize([$2])), - [_LT_SET_OPTION([$1], _LT_Option)]) - -m4_if([$1],[LT_INIT],[ - dnl - dnl Simply set some default values (i.e off) if boolean options were not - dnl specified: - _LT_UNLESS_OPTIONS([LT_INIT], [dlopen], [enable_dlopen=no - ]) - _LT_UNLESS_OPTIONS([LT_INIT], [win32-dll], [enable_win32_dll=no - ]) - dnl - dnl If no reference was made to various pairs of opposing options, then - dnl we run the default mode handler for the pair. For example, if neither - dnl `shared' nor `disable-shared' was passed, we enable building of shared - dnl archives by default: - _LT_UNLESS_OPTIONS([LT_INIT], [shared disable-shared], [_LT_ENABLE_SHARED]) - _LT_UNLESS_OPTIONS([LT_INIT], [static disable-static], [_LT_ENABLE_STATIC]) - _LT_UNLESS_OPTIONS([LT_INIT], [pic-only no-pic], [_LT_WITH_PIC]) - _LT_UNLESS_OPTIONS([LT_INIT], [fast-install disable-fast-install], - [_LT_ENABLE_FAST_INSTALL]) - ]) -])# _LT_SET_OPTIONS - - - -# _LT_MANGLE_DEFUN(MACRO-NAME, OPTION-NAME) -# ----------------------------------------- -m4_define([_LT_MANGLE_DEFUN], -[[_LT_OPTION_DEFUN_]m4_bpatsubst(m4_toupper([$1__$2]), [[^A-Z0-9_]], [_])]) - - -# LT_OPTION_DEFINE(MACRO-NAME, OPTION-NAME, CODE) -# ----------------------------------------------- -m4_define([LT_OPTION_DEFINE], -[m4_define(_LT_MANGLE_DEFUN([$1], [$2]), [$3])[]dnl -])# LT_OPTION_DEFINE - - -# dlopen -# ------ -LT_OPTION_DEFINE([LT_INIT], [dlopen], [enable_dlopen=yes -]) - -AU_DEFUN([AC_LIBTOOL_DLOPEN], -[_LT_SET_OPTION([LT_INIT], [dlopen]) -AC_DIAGNOSE([obsolete], -[$0: Remove this warning and the call to _LT_SET_OPTION when you -put the `dlopen' option into LT_INIT's first parameter.]) -]) - -dnl aclocal-1.4 backwards compatibility: -dnl AC_DEFUN([AC_LIBTOOL_DLOPEN], []) - - -# win32-dll -# --------- -# Declare package support for building win32 dll's. -LT_OPTION_DEFINE([LT_INIT], [win32-dll], -[enable_win32_dll=yes - -case $host in -*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-cegcc*) - AC_CHECK_TOOL(AS, as, false) - AC_CHECK_TOOL(DLLTOOL, dlltool, false) - AC_CHECK_TOOL(OBJDUMP, objdump, false) - ;; -esac - -test -z "$AS" && AS=as -_LT_DECL([], [AS], [1], [Assembler program])dnl - -test -z "$DLLTOOL" && DLLTOOL=dlltool -_LT_DECL([], [DLLTOOL], [1], [DLL creation program])dnl - -test -z "$OBJDUMP" && OBJDUMP=objdump -_LT_DECL([], [OBJDUMP], [1], [Object dumper program])dnl -])# win32-dll - -AU_DEFUN([AC_LIBTOOL_WIN32_DLL], -[AC_REQUIRE([AC_CANONICAL_HOST])dnl -_LT_SET_OPTION([LT_INIT], [win32-dll]) -AC_DIAGNOSE([obsolete], -[$0: Remove this warning and the call to _LT_SET_OPTION when you -put the `win32-dll' option into LT_INIT's first parameter.]) -]) - -dnl aclocal-1.4 backwards compatibility: -dnl AC_DEFUN([AC_LIBTOOL_WIN32_DLL], []) - - -# _LT_ENABLE_SHARED([DEFAULT]) -# ---------------------------- -# implement the --enable-shared flag, and supports the `shared' and -# `disable-shared' LT_INIT options. -# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. -m4_define([_LT_ENABLE_SHARED], -[m4_define([_LT_ENABLE_SHARED_DEFAULT], [m4_if($1, no, no, yes)])dnl -AC_ARG_ENABLE([shared], - [AS_HELP_STRING([--enable-shared@<:@=PKGS@:>@], - [build shared libraries @<:@default=]_LT_ENABLE_SHARED_DEFAULT[@:>@])], - [p=${PACKAGE-default} - case $enableval in - yes) enable_shared=yes ;; - no) enable_shared=no ;; - *) - enable_shared=no - # Look at the argument we got. We use all the common list separators. - lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," - for pkg in $enableval; do - IFS="$lt_save_ifs" - if test "X$pkg" = "X$p"; then - enable_shared=yes - fi - done - IFS="$lt_save_ifs" - ;; - esac], - [enable_shared=]_LT_ENABLE_SHARED_DEFAULT) - - _LT_DECL([build_libtool_libs], [enable_shared], [0], - [Whether or not to build shared libraries]) -])# _LT_ENABLE_SHARED - -LT_OPTION_DEFINE([LT_INIT], [shared], [_LT_ENABLE_SHARED([yes])]) -LT_OPTION_DEFINE([LT_INIT], [disable-shared], [_LT_ENABLE_SHARED([no])]) - -# Old names: -AC_DEFUN([AC_ENABLE_SHARED], -[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[shared]) -]) - -AC_DEFUN([AC_DISABLE_SHARED], -[_LT_SET_OPTION([LT_INIT], [disable-shared]) -]) - -AU_DEFUN([AM_ENABLE_SHARED], [AC_ENABLE_SHARED($@)]) -AU_DEFUN([AM_DISABLE_SHARED], [AC_DISABLE_SHARED($@)]) - -dnl aclocal-1.4 backwards compatibility: -dnl AC_DEFUN([AM_ENABLE_SHARED], []) -dnl AC_DEFUN([AM_DISABLE_SHARED], []) - - - -# _LT_ENABLE_STATIC([DEFAULT]) -# ---------------------------- -# implement the --enable-static flag, and support the `static' and -# `disable-static' LT_INIT options. -# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. -m4_define([_LT_ENABLE_STATIC], -[m4_define([_LT_ENABLE_STATIC_DEFAULT], [m4_if($1, no, no, yes)])dnl -AC_ARG_ENABLE([static], - [AS_HELP_STRING([--enable-static@<:@=PKGS@:>@], - [build static libraries @<:@default=]_LT_ENABLE_STATIC_DEFAULT[@:>@])], - [p=${PACKAGE-default} - case $enableval in - yes) enable_static=yes ;; - no) enable_static=no ;; - *) - enable_static=no - # Look at the argument we got. We use all the common list separators. - lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," - for pkg in $enableval; do - IFS="$lt_save_ifs" - if test "X$pkg" = "X$p"; then - enable_static=yes - fi - done - IFS="$lt_save_ifs" - ;; - esac], - [enable_static=]_LT_ENABLE_STATIC_DEFAULT) - - _LT_DECL([build_old_libs], [enable_static], [0], - [Whether or not to build static libraries]) -])# _LT_ENABLE_STATIC - -LT_OPTION_DEFINE([LT_INIT], [static], [_LT_ENABLE_STATIC([yes])]) -LT_OPTION_DEFINE([LT_INIT], [disable-static], [_LT_ENABLE_STATIC([no])]) - -# Old names: -AC_DEFUN([AC_ENABLE_STATIC], -[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[static]) -]) - -AC_DEFUN([AC_DISABLE_STATIC], -[_LT_SET_OPTION([LT_INIT], [disable-static]) -]) - -AU_DEFUN([AM_ENABLE_STATIC], [AC_ENABLE_STATIC($@)]) -AU_DEFUN([AM_DISABLE_STATIC], [AC_DISABLE_STATIC($@)]) - -dnl aclocal-1.4 backwards compatibility: -dnl AC_DEFUN([AM_ENABLE_STATIC], []) -dnl AC_DEFUN([AM_DISABLE_STATIC], []) - - - -# _LT_ENABLE_FAST_INSTALL([DEFAULT]) -# ---------------------------------- -# implement the --enable-fast-install flag, and support the `fast-install' -# and `disable-fast-install' LT_INIT options. -# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. -m4_define([_LT_ENABLE_FAST_INSTALL], -[m4_define([_LT_ENABLE_FAST_INSTALL_DEFAULT], [m4_if($1, no, no, yes)])dnl -AC_ARG_ENABLE([fast-install], - [AS_HELP_STRING([--enable-fast-install@<:@=PKGS@:>@], - [optimize for fast installation @<:@default=]_LT_ENABLE_FAST_INSTALL_DEFAULT[@:>@])], - [p=${PACKAGE-default} - case $enableval in - yes) enable_fast_install=yes ;; - no) enable_fast_install=no ;; - *) - enable_fast_install=no - # Look at the argument we got. We use all the common list separators. - lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," - for pkg in $enableval; do - IFS="$lt_save_ifs" - if test "X$pkg" = "X$p"; then - enable_fast_install=yes - fi - done - IFS="$lt_save_ifs" - ;; - esac], - [enable_fast_install=]_LT_ENABLE_FAST_INSTALL_DEFAULT) - -_LT_DECL([fast_install], [enable_fast_install], [0], - [Whether or not to optimize for fast installation])dnl -])# _LT_ENABLE_FAST_INSTALL - -LT_OPTION_DEFINE([LT_INIT], [fast-install], [_LT_ENABLE_FAST_INSTALL([yes])]) -LT_OPTION_DEFINE([LT_INIT], [disable-fast-install], [_LT_ENABLE_FAST_INSTALL([no])]) - -# Old names: -AU_DEFUN([AC_ENABLE_FAST_INSTALL], -[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[fast-install]) -AC_DIAGNOSE([obsolete], -[$0: Remove this warning and the call to _LT_SET_OPTION when you put -the `fast-install' option into LT_INIT's first parameter.]) -]) - -AU_DEFUN([AC_DISABLE_FAST_INSTALL], -[_LT_SET_OPTION([LT_INIT], [disable-fast-install]) -AC_DIAGNOSE([obsolete], -[$0: Remove this warning and the call to _LT_SET_OPTION when you put -the `disable-fast-install' option into LT_INIT's first parameter.]) -]) - -dnl aclocal-1.4 backwards compatibility: -dnl AC_DEFUN([AC_ENABLE_FAST_INSTALL], []) -dnl AC_DEFUN([AM_DISABLE_FAST_INSTALL], []) - - -# _LT_WITH_PIC([MODE]) -# -------------------- -# implement the --with-pic flag, and support the `pic-only' and `no-pic' -# LT_INIT options. -# MODE is either `yes' or `no'. If omitted, it defaults to `both'. -m4_define([_LT_WITH_PIC], -[AC_ARG_WITH([pic], - [AS_HELP_STRING([--with-pic], - [try to use only PIC/non-PIC objects @<:@default=use both@:>@])], - [pic_mode="$withval"], - [pic_mode=default]) - -test -z "$pic_mode" && pic_mode=m4_default([$1], [default]) - -_LT_DECL([], [pic_mode], [0], [What type of objects to build])dnl -])# _LT_WITH_PIC - -LT_OPTION_DEFINE([LT_INIT], [pic-only], [_LT_WITH_PIC([yes])]) -LT_OPTION_DEFINE([LT_INIT], [no-pic], [_LT_WITH_PIC([no])]) - -# Old name: -AU_DEFUN([AC_LIBTOOL_PICMODE], -[_LT_SET_OPTION([LT_INIT], [pic-only]) -AC_DIAGNOSE([obsolete], -[$0: Remove this warning and the call to _LT_SET_OPTION when you -put the `pic-only' option into LT_INIT's first parameter.]) -]) - -dnl aclocal-1.4 backwards compatibility: -dnl AC_DEFUN([AC_LIBTOOL_PICMODE], []) - - -m4_define([_LTDL_MODE], []) -LT_OPTION_DEFINE([LTDL_INIT], [nonrecursive], - [m4_define([_LTDL_MODE], [nonrecursive])]) -LT_OPTION_DEFINE([LTDL_INIT], [recursive], - [m4_define([_LTDL_MODE], [recursive])]) -LT_OPTION_DEFINE([LTDL_INIT], [subproject], - [m4_define([_LTDL_MODE], [subproject])]) - -m4_define([_LTDL_TYPE], []) -LT_OPTION_DEFINE([LTDL_INIT], [installable], - [m4_define([_LTDL_TYPE], [installable])]) -LT_OPTION_DEFINE([LTDL_INIT], [convenience], - [m4_define([_LTDL_TYPE], [convenience])]) - -# ltsugar.m4 -- libtool m4 base layer. -*-Autoconf-*- -# -# Copyright (C) 2004, 2005, 2007, 2008 Free Software Foundation, Inc. -# Written by Gary V. Vaughan, 2004 -# -# This file is free software; the Free Software Foundation gives -# unlimited permission to copy and/or distribute it, with or without -# modifications, as long as this notice is preserved. - -# serial 6 ltsugar.m4 - -# This is to help aclocal find these macros, as it can't see m4_define. -AC_DEFUN([LTSUGAR_VERSION], [m4_if([0.1])]) - - -# lt_join(SEP, ARG1, [ARG2...]) -# ----------------------------- -# Produce ARG1SEPARG2...SEPARGn, omitting [] arguments and their -# associated separator. -# Needed until we can rely on m4_join from Autoconf 2.62, since all earlier -# versions in m4sugar had bugs. -m4_define([lt_join], -[m4_if([$#], [1], [], - [$#], [2], [[$2]], - [m4_if([$2], [], [], [[$2]_])$0([$1], m4_shift(m4_shift($@)))])]) -m4_define([_lt_join], -[m4_if([$#$2], [2], [], - [m4_if([$2], [], [], [[$1$2]])$0([$1], m4_shift(m4_shift($@)))])]) - - -# lt_car(LIST) -# lt_cdr(LIST) -# ------------ -# Manipulate m4 lists. -# These macros are necessary as long as will still need to support -# Autoconf-2.59 which quotes differently. -m4_define([lt_car], [[$1]]) -m4_define([lt_cdr], -[m4_if([$#], 0, [m4_fatal([$0: cannot be called without arguments])], - [$#], 1, [], - [m4_dquote(m4_shift($@))])]) -m4_define([lt_unquote], $1) - - -# lt_append(MACRO-NAME, STRING, [SEPARATOR]) -# ------------------------------------------ -# Redefine MACRO-NAME to hold its former content plus `SEPARATOR'`STRING'. -# Note that neither SEPARATOR nor STRING are expanded; they are appended -# to MACRO-NAME as is (leaving the expansion for when MACRO-NAME is invoked). -# No SEPARATOR is output if MACRO-NAME was previously undefined (different -# than defined and empty). -# -# This macro is needed until we can rely on Autoconf 2.62, since earlier -# versions of m4sugar mistakenly expanded SEPARATOR but not STRING. -m4_define([lt_append], -[m4_define([$1], - m4_ifdef([$1], [m4_defn([$1])[$3]])[$2])]) - - - -# lt_combine(SEP, PREFIX-LIST, INFIX, SUFFIX1, [SUFFIX2...]) -# ---------------------------------------------------------- -# Produce a SEP delimited list of all paired combinations of elements of -# PREFIX-LIST with SUFFIX1 through SUFFIXn. Each element of the list -# has the form PREFIXmINFIXSUFFIXn. -# Needed until we can rely on m4_combine added in Autoconf 2.62. -m4_define([lt_combine], -[m4_if(m4_eval([$# > 3]), [1], - [m4_pushdef([_Lt_sep], [m4_define([_Lt_sep], m4_defn([lt_car]))])]]dnl -[[m4_foreach([_Lt_prefix], [$2], - [m4_foreach([_Lt_suffix], - ]m4_dquote(m4_dquote(m4_shift(m4_shift(m4_shift($@)))))[, - [_Lt_sep([$1])[]m4_defn([_Lt_prefix])[$3]m4_defn([_Lt_suffix])])])])]) - - -# lt_if_append_uniq(MACRO-NAME, VARNAME, [SEPARATOR], [UNIQ], [NOT-UNIQ]) -# ----------------------------------------------------------------------- -# Iff MACRO-NAME does not yet contain VARNAME, then append it (delimited -# by SEPARATOR if supplied) and expand UNIQ, else NOT-UNIQ. -m4_define([lt_if_append_uniq], -[m4_ifdef([$1], - [m4_if(m4_index([$3]m4_defn([$1])[$3], [$3$2$3]), [-1], - [lt_append([$1], [$2], [$3])$4], - [$5])], - [lt_append([$1], [$2], [$3])$4])]) - - -# lt_dict_add(DICT, KEY, VALUE) -# ----------------------------- -m4_define([lt_dict_add], -[m4_define([$1($2)], [$3])]) - - -# lt_dict_add_subkey(DICT, KEY, SUBKEY, VALUE) -# -------------------------------------------- -m4_define([lt_dict_add_subkey], -[m4_define([$1($2:$3)], [$4])]) - - -# lt_dict_fetch(DICT, KEY, [SUBKEY]) -# ---------------------------------- -m4_define([lt_dict_fetch], -[m4_ifval([$3], - m4_ifdef([$1($2:$3)], [m4_defn([$1($2:$3)])]), - m4_ifdef([$1($2)], [m4_defn([$1($2)])]))]) - - -# lt_if_dict_fetch(DICT, KEY, [SUBKEY], VALUE, IF-TRUE, [IF-FALSE]) -# ----------------------------------------------------------------- -m4_define([lt_if_dict_fetch], -[m4_if(lt_dict_fetch([$1], [$2], [$3]), [$4], - [$5], - [$6])]) - - -# lt_dict_filter(DICT, [SUBKEY], VALUE, [SEPARATOR], KEY, [...]) -# -------------------------------------------------------------- -m4_define([lt_dict_filter], -[m4_if([$5], [], [], - [lt_join(m4_quote(m4_default([$4], [[, ]])), - lt_unquote(m4_split(m4_normalize(m4_foreach(_Lt_key, lt_car([m4_shiftn(4, $@)]), - [lt_if_dict_fetch([$1], _Lt_key, [$2], [$3], [_Lt_key ])])))))])[]dnl -]) - -# ltversion.m4 -- version numbers -*- Autoconf -*- -# -# Copyright (C) 2004 Free Software Foundation, Inc. -# Written by Scott James Remnant, 2004 -# -# This file is free software; the Free Software Foundation gives -# unlimited permission to copy and/or distribute it, with or without -# modifications, as long as this notice is preserved. - -# @configure_input@ - -# serial 3293 ltversion.m4 -# This file is part of GNU Libtool - -m4_define([LT_PACKAGE_VERSION], [2.4]) -m4_define([LT_PACKAGE_REVISION], [1.3293]) - -AC_DEFUN([LTVERSION_VERSION], -[macro_version='2.4' -macro_revision='1.3293' -_LT_DECL(, macro_version, 0, [Which release of libtool.m4 was used?]) -_LT_DECL(, macro_revision, 0) -]) - -# lt~obsolete.m4 -- aclocal satisfying obsolete definitions. -*-Autoconf-*- -# -# Copyright (C) 2004, 2005, 2007, 2009 Free Software Foundation, Inc. -# Written by Scott James Remnant, 2004. -# -# This file is free software; the Free Software Foundation gives -# unlimited permission to copy and/or distribute it, with or without -# modifications, as long as this notice is preserved. - -# serial 5 lt~obsolete.m4 - -# These exist entirely to fool aclocal when bootstrapping libtool. -# -# In the past libtool.m4 has provided macros via AC_DEFUN (or AU_DEFUN) -# which have later been changed to m4_define as they aren't part of the -# exported API, or moved to Autoconf or Automake where they belong. -# -# The trouble is, aclocal is a bit thick. It'll see the old AC_DEFUN -# in /usr/share/aclocal/libtool.m4 and remember it, then when it sees us -# using a macro with the same name in our local m4/libtool.m4 it'll -# pull the old libtool.m4 in (it doesn't see our shiny new m4_define -# and doesn't know about Autoconf macros at all.) -# -# So we provide this file, which has a silly filename so it's always -# included after everything else. This provides aclocal with the -# AC_DEFUNs it wants, but when m4 processes it, it doesn't do anything -# because those macros already exist, or will be overwritten later. -# We use AC_DEFUN over AU_DEFUN for compatibility with aclocal-1.6. -# -# Anytime we withdraw an AC_DEFUN or AU_DEFUN, remember to add it here. -# Yes, that means every name once taken will need to remain here until -# we give up compatibility with versions before 1.7, at which point -# we need to keep only those names which we still refer to. - -# This is to help aclocal find these macros, as it can't see m4_define. -AC_DEFUN([LTOBSOLETE_VERSION], [m4_if([1])]) - -m4_ifndef([AC_LIBTOOL_LINKER_OPTION], [AC_DEFUN([AC_LIBTOOL_LINKER_OPTION])]) -m4_ifndef([AC_PROG_EGREP], [AC_DEFUN([AC_PROG_EGREP])]) -m4_ifndef([_LT_AC_PROG_ECHO_BACKSLASH], [AC_DEFUN([_LT_AC_PROG_ECHO_BACKSLASH])]) -m4_ifndef([_LT_AC_SHELL_INIT], [AC_DEFUN([_LT_AC_SHELL_INIT])]) -m4_ifndef([_LT_AC_SYS_LIBPATH_AIX], [AC_DEFUN([_LT_AC_SYS_LIBPATH_AIX])]) -m4_ifndef([_LT_PROG_LTMAIN], [AC_DEFUN([_LT_PROG_LTMAIN])]) -m4_ifndef([_LT_AC_TAGVAR], [AC_DEFUN([_LT_AC_TAGVAR])]) -m4_ifndef([AC_LTDL_ENABLE_INSTALL], [AC_DEFUN([AC_LTDL_ENABLE_INSTALL])]) -m4_ifndef([AC_LTDL_PREOPEN], [AC_DEFUN([AC_LTDL_PREOPEN])]) -m4_ifndef([_LT_AC_SYS_COMPILER], [AC_DEFUN([_LT_AC_SYS_COMPILER])]) -m4_ifndef([_LT_AC_LOCK], [AC_DEFUN([_LT_AC_LOCK])]) -m4_ifndef([AC_LIBTOOL_SYS_OLD_ARCHIVE], [AC_DEFUN([AC_LIBTOOL_SYS_OLD_ARCHIVE])]) -m4_ifndef([_LT_AC_TRY_DLOPEN_SELF], [AC_DEFUN([_LT_AC_TRY_DLOPEN_SELF])]) -m4_ifndef([AC_LIBTOOL_PROG_CC_C_O], [AC_DEFUN([AC_LIBTOOL_PROG_CC_C_O])]) -m4_ifndef([AC_LIBTOOL_SYS_HARD_LINK_LOCKS], [AC_DEFUN([AC_LIBTOOL_SYS_HARD_LINK_LOCKS])]) -m4_ifndef([AC_LIBTOOL_OBJDIR], [AC_DEFUN([AC_LIBTOOL_OBJDIR])]) -m4_ifndef([AC_LTDL_OBJDIR], [AC_DEFUN([AC_LTDL_OBJDIR])]) -m4_ifndef([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH], [AC_DEFUN([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH])]) -m4_ifndef([AC_LIBTOOL_SYS_LIB_STRIP], [AC_DEFUN([AC_LIBTOOL_SYS_LIB_STRIP])]) -m4_ifndef([AC_PATH_MAGIC], [AC_DEFUN([AC_PATH_MAGIC])]) -m4_ifndef([AC_PROG_LD_GNU], [AC_DEFUN([AC_PROG_LD_GNU])]) -m4_ifndef([AC_PROG_LD_RELOAD_FLAG], [AC_DEFUN([AC_PROG_LD_RELOAD_FLAG])]) -m4_ifndef([AC_DEPLIBS_CHECK_METHOD], [AC_DEFUN([AC_DEPLIBS_CHECK_METHOD])]) -m4_ifndef([AC_LIBTOOL_PROG_COMPILER_NO_RTTI], [AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_NO_RTTI])]) -m4_ifndef([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE], [AC_DEFUN([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE])]) -m4_ifndef([AC_LIBTOOL_PROG_COMPILER_PIC], [AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_PIC])]) -m4_ifndef([AC_LIBTOOL_PROG_LD_SHLIBS], [AC_DEFUN([AC_LIBTOOL_PROG_LD_SHLIBS])]) -m4_ifndef([AC_LIBTOOL_POSTDEP_PREDEP], [AC_DEFUN([AC_LIBTOOL_POSTDEP_PREDEP])]) -m4_ifndef([LT_AC_PROG_EGREP], [AC_DEFUN([LT_AC_PROG_EGREP])]) -m4_ifndef([LT_AC_PROG_SED], [AC_DEFUN([LT_AC_PROG_SED])]) -m4_ifndef([_LT_CC_BASENAME], [AC_DEFUN([_LT_CC_BASENAME])]) -m4_ifndef([_LT_COMPILER_BOILERPLATE], [AC_DEFUN([_LT_COMPILER_BOILERPLATE])]) -m4_ifndef([_LT_LINKER_BOILERPLATE], [AC_DEFUN([_LT_LINKER_BOILERPLATE])]) -m4_ifndef([_AC_PROG_LIBTOOL], [AC_DEFUN([_AC_PROG_LIBTOOL])]) -m4_ifndef([AC_LIBTOOL_SETUP], [AC_DEFUN([AC_LIBTOOL_SETUP])]) -m4_ifndef([_LT_AC_CHECK_DLFCN], [AC_DEFUN([_LT_AC_CHECK_DLFCN])]) -m4_ifndef([AC_LIBTOOL_SYS_DYNAMIC_LINKER], [AC_DEFUN([AC_LIBTOOL_SYS_DYNAMIC_LINKER])]) -m4_ifndef([_LT_AC_TAGCONFIG], [AC_DEFUN([_LT_AC_TAGCONFIG])]) -m4_ifndef([AC_DISABLE_FAST_INSTALL], [AC_DEFUN([AC_DISABLE_FAST_INSTALL])]) -m4_ifndef([_LT_AC_LANG_CXX], [AC_DEFUN([_LT_AC_LANG_CXX])]) -m4_ifndef([_LT_AC_LANG_F77], [AC_DEFUN([_LT_AC_LANG_F77])]) -m4_ifndef([_LT_AC_LANG_GCJ], [AC_DEFUN([_LT_AC_LANG_GCJ])]) -m4_ifndef([AC_LIBTOOL_LANG_C_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_C_CONFIG])]) -m4_ifndef([_LT_AC_LANG_C_CONFIG], [AC_DEFUN([_LT_AC_LANG_C_CONFIG])]) -m4_ifndef([AC_LIBTOOL_LANG_CXX_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_CXX_CONFIG])]) -m4_ifndef([_LT_AC_LANG_CXX_CONFIG], [AC_DEFUN([_LT_AC_LANG_CXX_CONFIG])]) -m4_ifndef([AC_LIBTOOL_LANG_F77_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_F77_CONFIG])]) -m4_ifndef([_LT_AC_LANG_F77_CONFIG], [AC_DEFUN([_LT_AC_LANG_F77_CONFIG])]) -m4_ifndef([AC_LIBTOOL_LANG_GCJ_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_GCJ_CONFIG])]) -m4_ifndef([_LT_AC_LANG_GCJ_CONFIG], [AC_DEFUN([_LT_AC_LANG_GCJ_CONFIG])]) -m4_ifndef([AC_LIBTOOL_LANG_RC_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_RC_CONFIG])]) -m4_ifndef([_LT_AC_LANG_RC_CONFIG], [AC_DEFUN([_LT_AC_LANG_RC_CONFIG])]) -m4_ifndef([AC_LIBTOOL_CONFIG], [AC_DEFUN([AC_LIBTOOL_CONFIG])]) -m4_ifndef([_LT_AC_FILE_LTDLL_C], [AC_DEFUN([_LT_AC_FILE_LTDLL_C])]) -m4_ifndef([_LT_REQUIRED_DARWIN_CHECKS], [AC_DEFUN([_LT_REQUIRED_DARWIN_CHECKS])]) -m4_ifndef([_LT_AC_PROG_CXXCPP], [AC_DEFUN([_LT_AC_PROG_CXXCPP])]) -m4_ifndef([_LT_PREPARE_SED_QUOTE_VARS], [AC_DEFUN([_LT_PREPARE_SED_QUOTE_VARS])]) -m4_ifndef([_LT_PROG_ECHO_BACKSLASH], [AC_DEFUN([_LT_PROG_ECHO_BACKSLASH])]) -m4_ifndef([_LT_PROG_F77], [AC_DEFUN([_LT_PROG_F77])]) -m4_ifndef([_LT_PROG_FC], [AC_DEFUN([_LT_PROG_FC])]) -m4_ifndef([_LT_PROG_CXX], [AC_DEFUN([_LT_PROG_CXX])]) - # Copyright (C) 2002, 2003, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation @@ -9396,3 +949,8 @@ AC_SUBST([am__untar]) ]) # _AM_PROG_TAR +m4_include([m4/libtool.m4]) +m4_include([m4/ltoptions.m4]) +m4_include([m4/ltsugar.m4]) +m4_include([m4/ltversion.m4]) +m4_include([m4/lt~obsolete.m4]) diff -Nru libshairport-1.2.0.20310.1/autom4te.cache/output.0 libshairport-1.2.1~git20120110.aeb4987/autom4te.cache/output.0 --- libshairport-1.2.0.20310.1/autom4te.cache/output.0 2011-11-10 19:35:47.000000000 +0000 +++ libshairport-1.2.1~git20120110.aeb4987/autom4te.cache/output.0 1970-01-01 00:00:00.000000000 +0000 @@ -1,15960 +0,0 @@ -@%:@! /bin/sh -@%:@ Guess values for system-dependent variables and create Makefiles. -@%:@ Generated by GNU Autoconf 2.68 for shairport.c 1.2.0. -@%:@ -@%:@ Report bugs to . -@%:@ -@%:@ -@%:@ Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, -@%:@ 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010 Free Software -@%:@ Foundation, Inc. -@%:@ -@%:@ -@%:@ This configure script is free software; the Free Software Foundation -@%:@ gives unlimited permission to copy, distribute and modify it. -## -------------------- ## -## M4sh Initialization. ## -## -------------------- ## - -# Be more Bourne compatible -DUALCASE=1; export DUALCASE # for MKS sh -if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then : - emulate sh - NULLCMD=: - # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which - # is contrary to our usage. Disable this feature. - alias -g '${1+"$@"}'='"$@"' - setopt NO_GLOB_SUBST -else - case `(set -o) 2>/dev/null` in @%:@( - *posix*) : - set -o posix ;; @%:@( - *) : - ;; -esac -fi - - -as_nl=' -' -export as_nl -# Printing a long string crashes Solaris 7 /usr/bin/printf. -as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' -as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo -as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo -# Prefer a ksh shell builtin over an external printf program on Solaris, -# but without wasting forks for bash or zsh. -if test -z "$BASH_VERSION$ZSH_VERSION" \ - && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then - as_echo='print -r --' - as_echo_n='print -rn --' -elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then - as_echo='printf %s\n' - as_echo_n='printf %s' -else - if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then - as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"' - as_echo_n='/usr/ucb/echo -n' - else - as_echo_body='eval expr "X$1" : "X\\(.*\\)"' - as_echo_n_body='eval - arg=$1; - case $arg in @%:@( - *"$as_nl"*) - expr "X$arg" : "X\\(.*\\)$as_nl"; - arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;; - esac; - expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl" - ' - export as_echo_n_body - as_echo_n='sh -c $as_echo_n_body as_echo' - fi - export as_echo_body - as_echo='sh -c $as_echo_body as_echo' -fi - -# The user is always right. -if test "${PATH_SEPARATOR+set}" != set; then - PATH_SEPARATOR=: - (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { - (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || - PATH_SEPARATOR=';' - } -fi - - -# IFS -# We need space, tab and new line, in precisely that order. Quoting is -# there to prevent editors from complaining about space-tab. -# (If _AS_PATH_WALK were called with IFS unset, it would disable word -# splitting by setting IFS to empty value.) -IFS=" "" $as_nl" - -# Find who we are. Look in the path if we contain no directory separator. -as_myself= -case $0 in @%:@(( - *[\\/]* ) as_myself=$0 ;; - *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break - done -IFS=$as_save_IFS - - ;; -esac -# We did not find ourselves, most probably we were run as `sh COMMAND' -# in which case we are not to be found in the path. -if test "x$as_myself" = x; then - as_myself=$0 -fi -if test ! -f "$as_myself"; then - $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 - exit 1 -fi - -# Unset variables that we do not need and which cause bugs (e.g. in -# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1" -# suppresses any "Segmentation fault" message there. '((' could -# trigger a bug in pdksh 5.2.14. -for as_var in BASH_ENV ENV MAIL MAILPATH -do eval test x\${$as_var+set} = xset \ - && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || : -done -PS1='$ ' -PS2='> ' -PS4='+ ' - -# NLS nuisances. -LC_ALL=C -export LC_ALL -LANGUAGE=C -export LANGUAGE - -# CDPATH. -(unset CDPATH) >/dev/null 2>&1 && unset CDPATH - -if test "x$CONFIG_SHELL" = x; then - as_bourne_compatible="if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then : - emulate sh - NULLCMD=: - # Pre-4.2 versions of Zsh do word splitting on \${1+\"\$@\"}, which - # is contrary to our usage. Disable this feature. - alias -g '\${1+\"\$@\"}'='\"\$@\"' - setopt NO_GLOB_SUBST -else - case \`(set -o) 2>/dev/null\` in @%:@( - *posix*) : - set -o posix ;; @%:@( - *) : - ;; -esac -fi -" - as_required="as_fn_return () { (exit \$1); } -as_fn_success () { as_fn_return 0; } -as_fn_failure () { as_fn_return 1; } -as_fn_ret_success () { return 0; } -as_fn_ret_failure () { return 1; } - -exitcode=0 -as_fn_success || { exitcode=1; echo as_fn_success failed.; } -as_fn_failure && { exitcode=1; echo as_fn_failure succeeded.; } -as_fn_ret_success || { exitcode=1; echo as_fn_ret_success failed.; } -as_fn_ret_failure && { exitcode=1; echo as_fn_ret_failure succeeded.; } -if ( set x; as_fn_ret_success y && test x = \"\$1\" ); then : - -else - exitcode=1; echo positional parameters were not saved. -fi -test x\$exitcode = x0 || exit 1" - as_suggested=" as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_1a=\$LINENO - as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO - eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" && - test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1 - - test -n \"\${ZSH_VERSION+set}\${BASH_VERSION+set}\" || ( - ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' - ECHO=\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO - ECHO=\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO - PATH=/empty FPATH=/empty; export PATH FPATH - test \"X\`printf %s \$ECHO\`\" = \"X\$ECHO\" \\ - || test \"X\`print -r -- \$ECHO\`\" = \"X\$ECHO\" ) || exit 1 -test \$(( 1 + 1 )) = 2 || exit 1" - if (eval "$as_required") 2>/dev/null; then : - as_have_required=yes -else - as_have_required=no -fi - if test x$as_have_required = xyes && (eval "$as_suggested") 2>/dev/null; then : - -else - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -as_found=false -for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - as_found=: - case $as_dir in @%:@( - /*) - for as_base in sh bash ksh sh5; do - # Try only shells that exist, to save several forks. - as_shell=$as_dir/$as_base - if { test -f "$as_shell" || test -f "$as_shell.exe"; } && - { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$as_shell"; } 2>/dev/null; then : - CONFIG_SHELL=$as_shell as_have_required=yes - if { $as_echo "$as_bourne_compatible""$as_suggested" | as_run=a "$as_shell"; } 2>/dev/null; then : - break 2 -fi -fi - done;; - esac - as_found=false -done -$as_found || { if { test -f "$SHELL" || test -f "$SHELL.exe"; } && - { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$SHELL"; } 2>/dev/null; then : - CONFIG_SHELL=$SHELL as_have_required=yes -fi; } -IFS=$as_save_IFS - - - if test "x$CONFIG_SHELL" != x; then : - # We cannot yet assume a decent shell, so we have to provide a - # neutralization value for shells without unset; and this also - # works around shells that cannot unset nonexistent variables. - # Preserve -v and -x to the replacement shell. - BASH_ENV=/dev/null - ENV=/dev/null - (unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV - export CONFIG_SHELL - case $- in @%:@ (((( - *v*x* | *x*v* ) as_opts=-vx ;; - *v* ) as_opts=-v ;; - *x* ) as_opts=-x ;; - * ) as_opts= ;; - esac - exec "$CONFIG_SHELL" $as_opts "$as_myself" ${1+"$@"} -fi - - if test x$as_have_required = xno; then : - $as_echo "$0: This script requires a shell more modern than all" - $as_echo "$0: the shells that I found on your system." - if test x${ZSH_VERSION+set} = xset ; then - $as_echo "$0: In particular, zsh $ZSH_VERSION has bugs and should" - $as_echo "$0: be upgraded to zsh 4.3.4 or later." - else - $as_echo "$0: Please tell bug-autoconf@gnu.org and -$0: http://trac.xbmc.org about your system, including any -$0: error possibly output before this message. Then install -$0: a modern shell, or manually run the script under such a -$0: shell if you do have one." - fi - exit 1 -fi -fi -fi -SHELL=${CONFIG_SHELL-/bin/sh} -export SHELL -# Unset more variables known to interfere with behavior of common tools. -CLICOLOR_FORCE= GREP_OPTIONS= -unset CLICOLOR_FORCE GREP_OPTIONS - -## --------------------- ## -## M4sh Shell Functions. ## -## --------------------- ## -@%:@ as_fn_unset VAR -@%:@ --------------- -@%:@ Portably unset VAR. -as_fn_unset () -{ - { eval $1=; unset $1;} -} -as_unset=as_fn_unset - -@%:@ as_fn_set_status STATUS -@%:@ ----------------------- -@%:@ Set @S|@? to STATUS, without forking. -as_fn_set_status () -{ - return $1 -} @%:@ as_fn_set_status - -@%:@ as_fn_exit STATUS -@%:@ ----------------- -@%:@ Exit the shell with STATUS, even in a "trap 0" or "set -e" context. -as_fn_exit () -{ - set +e - as_fn_set_status $1 - exit $1 -} @%:@ as_fn_exit - -@%:@ as_fn_mkdir_p -@%:@ ------------- -@%:@ Create "@S|@as_dir" as a directory, including parents if necessary. -as_fn_mkdir_p () -{ - - case $as_dir in #( - -*) as_dir=./$as_dir;; - esac - test -d "$as_dir" || eval $as_mkdir_p || { - as_dirs= - while :; do - case $as_dir in #( - *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( - *) as_qdir=$as_dir;; - esac - as_dirs="'$as_qdir' $as_dirs" - as_dir=`$as_dirname -- "$as_dir" || -$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$as_dir" : 'X\(//\)[^/]' \| \ - X"$as_dir" : 'X\(//\)$' \| \ - X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X"$as_dir" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - test -d "$as_dir" && break - done - test -z "$as_dirs" || eval "mkdir $as_dirs" - } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir" - - -} @%:@ as_fn_mkdir_p -@%:@ as_fn_append VAR VALUE -@%:@ ---------------------- -@%:@ Append the text in VALUE to the end of the definition contained in VAR. Take -@%:@ advantage of any shell optimizations that allow amortized linear growth over -@%:@ repeated appends, instead of the typical quadratic growth present in naive -@%:@ implementations. -if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then : - eval 'as_fn_append () - { - eval $1+=\$2 - }' -else - as_fn_append () - { - eval $1=\$$1\$2 - } -fi # as_fn_append - -@%:@ as_fn_arith ARG... -@%:@ ------------------ -@%:@ Perform arithmetic evaluation on the ARGs, and store the result in the -@%:@ global @S|@as_val. Take advantage of shells that can avoid forks. The arguments -@%:@ must be portable across @S|@(()) and expr. -if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then : - eval 'as_fn_arith () - { - as_val=$(( $* )) - }' -else - as_fn_arith () - { - as_val=`expr "$@" || test $? -eq 1` - } -fi # as_fn_arith - - -@%:@ as_fn_error STATUS ERROR [LINENO LOG_FD] -@%:@ ---------------------------------------- -@%:@ Output "`basename @S|@0`: error: ERROR" to stderr. If LINENO and LOG_FD are -@%:@ provided, also output the error to LOG_FD, referencing LINENO. Then exit the -@%:@ script with STATUS, using 1 if that was 0. -as_fn_error () -{ - as_status=$1; test $as_status -eq 0 && as_status=1 - if test "$4"; then - as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4 - fi - $as_echo "$as_me: error: $2" >&2 - as_fn_exit $as_status -} @%:@ as_fn_error - -if expr a : '\(a\)' >/dev/null 2>&1 && - test "X`expr 00001 : '.*\(...\)'`" = X001; then - as_expr=expr -else - as_expr=false -fi - -if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then - as_basename=basename -else - as_basename=false -fi - -if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then - as_dirname=dirname -else - as_dirname=false -fi - -as_me=`$as_basename -- "$0" || -$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ - X"$0" : 'X\(//\)$' \| \ - X"$0" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X/"$0" | - sed '/^.*\/\([^/][^/]*\)\/*$/{ - s//\1/ - q - } - /^X\/\(\/\/\)$/{ - s//\1/ - q - } - /^X\/\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - -# Avoid depending upon Character Ranges. -as_cr_letters='abcdefghijklmnopqrstuvwxyz' -as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' -as_cr_Letters=$as_cr_letters$as_cr_LETTERS -as_cr_digits='0123456789' -as_cr_alnum=$as_cr_Letters$as_cr_digits - - - as_lineno_1=$LINENO as_lineno_1a=$LINENO - as_lineno_2=$LINENO as_lineno_2a=$LINENO - eval 'test "x$as_lineno_1'$as_run'" != "x$as_lineno_2'$as_run'" && - test "x`expr $as_lineno_1'$as_run' + 1`" = "x$as_lineno_2'$as_run'"' || { - # Blame Lee E. McMahon (1931-1989) for sed's syntax. :-) - sed -n ' - p - /[$]LINENO/= - ' <$as_myself | - sed ' - s/[$]LINENO.*/&-/ - t lineno - b - :lineno - N - :loop - s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/ - t loop - s/-\n.*// - ' >$as_me.lineno && - chmod +x "$as_me.lineno" || - { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2; as_fn_exit 1; } - - # Don't try to exec as it changes $[0], causing all sort of problems - # (the dirname of $[0] is not the place where we might find the - # original and so on. Autoconf is especially sensitive to this). - . "./$as_me.lineno" - # Exit status is that of the last command. - exit -} - -ECHO_C= ECHO_N= ECHO_T= -case `echo -n x` in @%:@((((( --n*) - case `echo 'xy\c'` in - *c*) ECHO_T=' ';; # ECHO_T is single tab character. - xy) ECHO_C='\c';; - *) echo `echo ksh88 bug on AIX 6.1` > /dev/null - ECHO_T=' ';; - esac;; -*) - ECHO_N='-n';; -esac - -rm -f conf$$ conf$$.exe conf$$.file -if test -d conf$$.dir; then - rm -f conf$$.dir/conf$$.file -else - rm -f conf$$.dir - mkdir conf$$.dir 2>/dev/null -fi -if (echo >conf$$.file) 2>/dev/null; then - if ln -s conf$$.file conf$$ 2>/dev/null; then - as_ln_s='ln -s' - # ... but there are two gotchas: - # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. - # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. - # In both cases, we have to default to `cp -p'. - ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || - as_ln_s='cp -p' - elif ln conf$$.file conf$$ 2>/dev/null; then - as_ln_s=ln - else - as_ln_s='cp -p' - fi -else - as_ln_s='cp -p' -fi -rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file -rmdir conf$$.dir 2>/dev/null - -if mkdir -p . 2>/dev/null; then - as_mkdir_p='mkdir -p "$as_dir"' -else - test -d ./-p && rmdir ./-p - as_mkdir_p=false -fi - -if test -x / >/dev/null 2>&1; then - as_test_x='test -x' -else - if ls -dL / >/dev/null 2>&1; then - as_ls_L_option=L - else - as_ls_L_option= - fi - as_test_x=' - eval sh -c '\'' - if test -d "$1"; then - test -d "$1/."; - else - case $1 in @%:@( - -*)set "./$1";; - esac; - case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in @%:@(( - ???[sx]*):;;*)false;;esac;fi - '\'' sh - ' -fi -as_executable_p=$as_test_x - -# Sed expression to map a string onto a valid CPP name. -as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" - -# Sed expression to map a string onto a valid variable name. -as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" - -SHELL=${CONFIG_SHELL-/bin/sh} - - -test -n "$DJDIR" || exec 7<&0 &1 - -# Name of the host. -# hostname on some systems (SVR3.2, old GNU/Linux) returns a bogus exit status, -# so uname gets run too. -ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q` - -# -# Initializations. -# -ac_default_prefix=/usr/local -ac_clean_files= -ac_config_libobj_dir=. -LIB@&t@OBJS= -cross_compiling=no -subdirs= -MFLAGS= -MAKEFLAGS= - -# Identity of this package. -PACKAGE_NAME='shairport.c' -PACKAGE_TARNAME='shairport-c' -PACKAGE_VERSION='1.2.0' -PACKAGE_STRING='shairport.c 1.2.0' -PACKAGE_BUGREPORT='http://trac.xbmc.org' -PACKAGE_URL='' - -# Factoring default headers for most tests. -ac_includes_default="\ -#include -#ifdef HAVE_SYS_TYPES_H -# include -#endif -#ifdef HAVE_SYS_STAT_H -# include -#endif -#ifdef STDC_HEADERS -# include -# include -#else -# ifdef HAVE_STDLIB_H -# include -# endif -#endif -#ifdef HAVE_STRING_H -# if !defined STDC_HEADERS && defined HAVE_MEMORY_H -# include -# endif -# include -#endif -#ifdef HAVE_STRINGS_H -# include -#endif -#ifdef HAVE_INTTYPES_H -# include -#endif -#ifdef HAVE_STDINT_H -# include -#endif -#ifdef HAVE_UNISTD_H -# include -#endif" - -ac_subst_vars='am__EXEEXT_FALSE -am__EXEEXT_TRUE -LTLIBOBJS -LIB@&t@OBJS -CPP -OTOOL64 -OTOOL -LIPO -NMEDIT -DSYMUTIL -MANIFEST_TOOL -RANLIB -ac_ct_AR -AR -DLLTOOL -OBJDUMP -LN_S -NM -ac_ct_DUMPBIN -DUMPBIN -LD -FGREP -EGREP -GREP -SED -host_os -host_vendor -host_cpu -host -build_os -build_vendor -build_cpu -build -LIBTOOL -am__fastdepCC_FALSE -am__fastdepCC_TRUE -CCDEPMODE -AMDEPBACKSLASH -AMDEP_FALSE -AMDEP_TRUE -am__quote -am__include -DEPDIR -OBJEXT -EXEEXT -ac_ct_CC -CPPFLAGS -LDFLAGS -CFLAGS -CC -am__untar -am__tar -AMTAR -am__leading_dot -SET_MAKE -AWK -mkdir_p -MKDIR_P -INSTALL_STRIP_PROGRAM -STRIP -install_sh -MAKEINFO -AUTOHEADER -AUTOMAKE -AUTOCONF -ACLOCAL -VERSION -PACKAGE -CYGPATH_W -am__isrc -INSTALL_DATA -INSTALL_SCRIPT -INSTALL_PROGRAM -target_alias -host_alias -build_alias -LIBS -ECHO_T -ECHO_N -ECHO_C -DEFS -mandir -localedir -libdir -psdir -pdfdir -dvidir -htmldir -infodir -docdir -oldincludedir -includedir -localstatedir -sharedstatedir -sysconfdir -datadir -datarootdir -libexecdir -sbindir -bindir -program_transform_name -prefix -exec_prefix -PACKAGE_URL -PACKAGE_BUGREPORT -PACKAGE_STRING -PACKAGE_VERSION -PACKAGE_TARNAME -PACKAGE_NAME -PATH_SEPARATOR -SHELL' -ac_subst_files='' -ac_user_opts=' -enable_option_checking -enable_dependency_tracking -enable_static -enable_shared -with_pic -enable_fast_install -with_gnu_ld -with_sysroot -enable_libtool_lock -' - ac_precious_vars='build_alias -host_alias -target_alias -CC -CFLAGS -LDFLAGS -LIBS -CPPFLAGS -CPP' - - -# Initialize some variables set by options. -ac_init_help= -ac_init_version=false -ac_unrecognized_opts= -ac_unrecognized_sep= -# The variables have the same names as the options, with -# dashes changed to underlines. -cache_file=/dev/null -exec_prefix=NONE -no_create= -no_recursion= -prefix=NONE -program_prefix=NONE -program_suffix=NONE -program_transform_name=s,x,x, -silent= -site= -srcdir= -verbose= -x_includes=NONE -x_libraries=NONE - -# Installation directory options. -# These are left unexpanded so users can "make install exec_prefix=/foo" -# and all the variables that are supposed to be based on exec_prefix -# by default will actually change. -# Use braces instead of parens because sh, perl, etc. also accept them. -# (The list follows the same order as the GNU Coding Standards.) -bindir='${exec_prefix}/bin' -sbindir='${exec_prefix}/sbin' -libexecdir='${exec_prefix}/libexec' -datarootdir='${prefix}/share' -datadir='${datarootdir}' -sysconfdir='${prefix}/etc' -sharedstatedir='${prefix}/com' -localstatedir='${prefix}/var' -includedir='${prefix}/include' -oldincludedir='/usr/include' -docdir='${datarootdir}/doc/${PACKAGE_TARNAME}' -infodir='${datarootdir}/info' -htmldir='${docdir}' -dvidir='${docdir}' -pdfdir='${docdir}' -psdir='${docdir}' -libdir='${exec_prefix}/lib' -localedir='${datarootdir}/locale' -mandir='${datarootdir}/man' - -ac_prev= -ac_dashdash= -for ac_option -do - # If the previous option needs an argument, assign it. - if test -n "$ac_prev"; then - eval $ac_prev=\$ac_option - ac_prev= - continue - fi - - case $ac_option in - *=?*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;; - *=) ac_optarg= ;; - *) ac_optarg=yes ;; - esac - - # Accept the important Cygnus configure options, so we can diagnose typos. - - case $ac_dashdash$ac_option in - --) - ac_dashdash=yes ;; - - -bindir | --bindir | --bindi | --bind | --bin | --bi) - ac_prev=bindir ;; - -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*) - bindir=$ac_optarg ;; - - -build | --build | --buil | --bui | --bu) - ac_prev=build_alias ;; - -build=* | --build=* | --buil=* | --bui=* | --bu=*) - build_alias=$ac_optarg ;; - - -cache-file | --cache-file | --cache-fil | --cache-fi \ - | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c) - ac_prev=cache_file ;; - -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \ - | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*) - cache_file=$ac_optarg ;; - - --config-cache | -C) - cache_file=config.cache ;; - - -datadir | --datadir | --datadi | --datad) - ac_prev=datadir ;; - -datadir=* | --datadir=* | --datadi=* | --datad=*) - datadir=$ac_optarg ;; - - -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \ - | --dataroo | --dataro | --datar) - ac_prev=datarootdir ;; - -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \ - | --dataroot=* | --dataroo=* | --dataro=* | --datar=*) - datarootdir=$ac_optarg ;; - - -disable-* | --disable-*) - ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'` - # Reject names that are not valid shell variable names. - expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && - as_fn_error $? "invalid feature name: $ac_useropt" - ac_useropt_orig=$ac_useropt - ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` - case $ac_user_opts in - *" -"enable_$ac_useropt" -"*) ;; - *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--disable-$ac_useropt_orig" - ac_unrecognized_sep=', ';; - esac - eval enable_$ac_useropt=no ;; - - -docdir | --docdir | --docdi | --doc | --do) - ac_prev=docdir ;; - -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*) - docdir=$ac_optarg ;; - - -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv) - ac_prev=dvidir ;; - -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*) - dvidir=$ac_optarg ;; - - -enable-* | --enable-*) - ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'` - # Reject names that are not valid shell variable names. - expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && - as_fn_error $? "invalid feature name: $ac_useropt" - ac_useropt_orig=$ac_useropt - ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` - case $ac_user_opts in - *" -"enable_$ac_useropt" -"*) ;; - *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--enable-$ac_useropt_orig" - ac_unrecognized_sep=', ';; - esac - eval enable_$ac_useropt=\$ac_optarg ;; - - -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ - | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ - | --exec | --exe | --ex) - ac_prev=exec_prefix ;; - -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \ - | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \ - | --exec=* | --exe=* | --ex=*) - exec_prefix=$ac_optarg ;; - - -gas | --gas | --ga | --g) - # Obsolete; use --with-gas. - with_gas=yes ;; - - -help | --help | --hel | --he | -h) - ac_init_help=long ;; - -help=r* | --help=r* | --hel=r* | --he=r* | -hr*) - ac_init_help=recursive ;; - -help=s* | --help=s* | --hel=s* | --he=s* | -hs*) - ac_init_help=short ;; - - -host | --host | --hos | --ho) - ac_prev=host_alias ;; - -host=* | --host=* | --hos=* | --ho=*) - host_alias=$ac_optarg ;; - - -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht) - ac_prev=htmldir ;; - -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \ - | --ht=*) - htmldir=$ac_optarg ;; - - -includedir | --includedir | --includedi | --included | --include \ - | --includ | --inclu | --incl | --inc) - ac_prev=includedir ;; - -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \ - | --includ=* | --inclu=* | --incl=* | --inc=*) - includedir=$ac_optarg ;; - - -infodir | --infodir | --infodi | --infod | --info | --inf) - ac_prev=infodir ;; - -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*) - infodir=$ac_optarg ;; - - -libdir | --libdir | --libdi | --libd) - ac_prev=libdir ;; - -libdir=* | --libdir=* | --libdi=* | --libd=*) - libdir=$ac_optarg ;; - - -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \ - | --libexe | --libex | --libe) - ac_prev=libexecdir ;; - -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \ - | --libexe=* | --libex=* | --libe=*) - libexecdir=$ac_optarg ;; - - -localedir | --localedir | --localedi | --localed | --locale) - ac_prev=localedir ;; - -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*) - localedir=$ac_optarg ;; - - -localstatedir | --localstatedir | --localstatedi | --localstated \ - | --localstate | --localstat | --localsta | --localst | --locals) - ac_prev=localstatedir ;; - -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \ - | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*) - localstatedir=$ac_optarg ;; - - -mandir | --mandir | --mandi | --mand | --man | --ma | --m) - ac_prev=mandir ;; - -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*) - mandir=$ac_optarg ;; - - -nfp | --nfp | --nf) - # Obsolete; use --without-fp. - with_fp=no ;; - - -no-create | --no-create | --no-creat | --no-crea | --no-cre \ - | --no-cr | --no-c | -n) - no_create=yes ;; - - -no-recursion | --no-recursion | --no-recursio | --no-recursi \ - | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) - no_recursion=yes ;; - - -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \ - | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \ - | --oldin | --oldi | --old | --ol | --o) - ac_prev=oldincludedir ;; - -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \ - | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \ - | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*) - oldincludedir=$ac_optarg ;; - - -prefix | --prefix | --prefi | --pref | --pre | --pr | --p) - ac_prev=prefix ;; - -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*) - prefix=$ac_optarg ;; - - -program-prefix | --program-prefix | --program-prefi | --program-pref \ - | --program-pre | --program-pr | --program-p) - ac_prev=program_prefix ;; - -program-prefix=* | --program-prefix=* | --program-prefi=* \ - | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*) - program_prefix=$ac_optarg ;; - - -program-suffix | --program-suffix | --program-suffi | --program-suff \ - | --program-suf | --program-su | --program-s) - ac_prev=program_suffix ;; - -program-suffix=* | --program-suffix=* | --program-suffi=* \ - | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*) - program_suffix=$ac_optarg ;; - - -program-transform-name | --program-transform-name \ - | --program-transform-nam | --program-transform-na \ - | --program-transform-n | --program-transform- \ - | --program-transform | --program-transfor \ - | --program-transfo | --program-transf \ - | --program-trans | --program-tran \ - | --progr-tra | --program-tr | --program-t) - ac_prev=program_transform_name ;; - -program-transform-name=* | --program-transform-name=* \ - | --program-transform-nam=* | --program-transform-na=* \ - | --program-transform-n=* | --program-transform-=* \ - | --program-transform=* | --program-transfor=* \ - | --program-transfo=* | --program-transf=* \ - | --program-trans=* | --program-tran=* \ - | --progr-tra=* | --program-tr=* | --program-t=*) - program_transform_name=$ac_optarg ;; - - -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd) - ac_prev=pdfdir ;; - -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*) - pdfdir=$ac_optarg ;; - - -psdir | --psdir | --psdi | --psd | --ps) - ac_prev=psdir ;; - -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*) - psdir=$ac_optarg ;; - - -q | -quiet | --quiet | --quie | --qui | --qu | --q \ - | -silent | --silent | --silen | --sile | --sil) - silent=yes ;; - - -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb) - ac_prev=sbindir ;; - -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \ - | --sbi=* | --sb=*) - sbindir=$ac_optarg ;; - - -sharedstatedir | --sharedstatedir | --sharedstatedi \ - | --sharedstated | --sharedstate | --sharedstat | --sharedsta \ - | --sharedst | --shareds | --shared | --share | --shar \ - | --sha | --sh) - ac_prev=sharedstatedir ;; - -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \ - | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \ - | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \ - | --sha=* | --sh=*) - sharedstatedir=$ac_optarg ;; - - -site | --site | --sit) - ac_prev=site ;; - -site=* | --site=* | --sit=*) - site=$ac_optarg ;; - - -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) - ac_prev=srcdir ;; - -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) - srcdir=$ac_optarg ;; - - -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \ - | --syscon | --sysco | --sysc | --sys | --sy) - ac_prev=sysconfdir ;; - -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \ - | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*) - sysconfdir=$ac_optarg ;; - - -target | --target | --targe | --targ | --tar | --ta | --t) - ac_prev=target_alias ;; - -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*) - target_alias=$ac_optarg ;; - - -v | -verbose | --verbose | --verbos | --verbo | --verb) - verbose=yes ;; - - -version | --version | --versio | --versi | --vers | -V) - ac_init_version=: ;; - - -with-* | --with-*) - ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'` - # Reject names that are not valid shell variable names. - expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && - as_fn_error $? "invalid package name: $ac_useropt" - ac_useropt_orig=$ac_useropt - ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` - case $ac_user_opts in - *" -"with_$ac_useropt" -"*) ;; - *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--with-$ac_useropt_orig" - ac_unrecognized_sep=', ';; - esac - eval with_$ac_useropt=\$ac_optarg ;; - - -without-* | --without-*) - ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'` - # Reject names that are not valid shell variable names. - expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && - as_fn_error $? "invalid package name: $ac_useropt" - ac_useropt_orig=$ac_useropt - ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` - case $ac_user_opts in - *" -"with_$ac_useropt" -"*) ;; - *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--without-$ac_useropt_orig" - ac_unrecognized_sep=', ';; - esac - eval with_$ac_useropt=no ;; - - --x) - # Obsolete; use --with-x. - with_x=yes ;; - - -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \ - | --x-incl | --x-inc | --x-in | --x-i) - ac_prev=x_includes ;; - -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \ - | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*) - x_includes=$ac_optarg ;; - - -x-libraries | --x-libraries | --x-librarie | --x-librari \ - | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l) - ac_prev=x_libraries ;; - -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \ - | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) - x_libraries=$ac_optarg ;; - - -*) as_fn_error $? "unrecognized option: \`$ac_option' -Try \`$0 --help' for more information" - ;; - - *=*) - ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='` - # Reject names that are not valid shell variable names. - case $ac_envvar in #( - '' | [0-9]* | *[!_$as_cr_alnum]* ) - as_fn_error $? "invalid variable name: \`$ac_envvar'" ;; - esac - eval $ac_envvar=\$ac_optarg - export $ac_envvar ;; - - *) - # FIXME: should be removed in autoconf 3.0. - $as_echo "$as_me: WARNING: you should use --build, --host, --target" >&2 - expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null && - $as_echo "$as_me: WARNING: invalid host type: $ac_option" >&2 - : "${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}" - ;; - - esac -done - -if test -n "$ac_prev"; then - ac_option=--`echo $ac_prev | sed 's/_/-/g'` - as_fn_error $? "missing argument to $ac_option" -fi - -if test -n "$ac_unrecognized_opts"; then - case $enable_option_checking in - no) ;; - fatal) as_fn_error $? "unrecognized options: $ac_unrecognized_opts" ;; - *) $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;; - esac -fi - -# Check all directory arguments for consistency. -for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \ - datadir sysconfdir sharedstatedir localstatedir includedir \ - oldincludedir docdir infodir htmldir dvidir pdfdir psdir \ - libdir localedir mandir -do - eval ac_val=\$$ac_var - # Remove trailing slashes. - case $ac_val in - */ ) - ac_val=`expr "X$ac_val" : 'X\(.*[^/]\)' \| "X$ac_val" : 'X\(.*\)'` - eval $ac_var=\$ac_val;; - esac - # Be sure to have absolute directory names. - case $ac_val in - [\\/$]* | ?:[\\/]* ) continue;; - NONE | '' ) case $ac_var in *prefix ) continue;; esac;; - esac - as_fn_error $? "expected an absolute directory name for --$ac_var: $ac_val" -done - -# There might be people who depend on the old broken behavior: `$host' -# used to hold the argument of --host etc. -# FIXME: To remove some day. -build=$build_alias -host=$host_alias -target=$target_alias - -# FIXME: To remove some day. -if test "x$host_alias" != x; then - if test "x$build_alias" = x; then - cross_compiling=maybe - $as_echo "$as_me: WARNING: if you wanted to set the --build type, don't use --host. - If a cross compiler is detected then cross compile mode will be used" >&2 - elif test "x$build_alias" != "x$host_alias"; then - cross_compiling=yes - fi -fi - -ac_tool_prefix= -test -n "$host_alias" && ac_tool_prefix=$host_alias- - -test "$silent" = yes && exec 6>/dev/null - - -ac_pwd=`pwd` && test -n "$ac_pwd" && -ac_ls_di=`ls -di .` && -ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` || - as_fn_error $? "working directory cannot be determined" -test "X$ac_ls_di" = "X$ac_pwd_ls_di" || - as_fn_error $? "pwd does not report name of working directory" - - -# Find the source files, if location was not specified. -if test -z "$srcdir"; then - ac_srcdir_defaulted=yes - # Try the directory containing this script, then the parent directory. - ac_confdir=`$as_dirname -- "$as_myself" || -$as_expr X"$as_myself" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$as_myself" : 'X\(//\)[^/]' \| \ - X"$as_myself" : 'X\(//\)$' \| \ - X"$as_myself" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X"$as_myself" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - srcdir=$ac_confdir - if test ! -r "$srcdir/$ac_unique_file"; then - srcdir=.. - fi -else - ac_srcdir_defaulted=no -fi -if test ! -r "$srcdir/$ac_unique_file"; then - test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .." - as_fn_error $? "cannot find sources ($ac_unique_file) in $srcdir" -fi -ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work" -ac_abs_confdir=`( - cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error $? "$ac_msg" - pwd)` -# When building in place, set srcdir=. -if test "$ac_abs_confdir" = "$ac_pwd"; then - srcdir=. -fi -# Remove unnecessary trailing slashes from srcdir. -# Double slashes in file names in object file debugging info -# mess up M-x gdb in Emacs. -case $srcdir in -*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;; -esac -for ac_var in $ac_precious_vars; do - eval ac_env_${ac_var}_set=\${${ac_var}+set} - eval ac_env_${ac_var}_value=\$${ac_var} - eval ac_cv_env_${ac_var}_set=\${${ac_var}+set} - eval ac_cv_env_${ac_var}_value=\$${ac_var} -done - -# -# Report the --help message. -# -if test "$ac_init_help" = "long"; then - # Omit some internal or obsolete options to make the list less imposing. - # This message is too long to be a string in the A/UX 3.1 sh. - cat <<_ACEOF -\`configure' configures shairport.c 1.2.0 to adapt to many kinds of systems. - -Usage: $0 [OPTION]... [VAR=VALUE]... - -To assign environment variables (e.g., CC, CFLAGS...), specify them as -VAR=VALUE. See below for descriptions of some of the useful variables. - -Defaults for the options are specified in brackets. - -Configuration: - -h, --help display this help and exit - --help=short display options specific to this package - --help=recursive display the short help of all the included packages - -V, --version display version information and exit - -q, --quiet, --silent do not print \`checking ...' messages - --cache-file=FILE cache test results in FILE [disabled] - -C, --config-cache alias for \`--cache-file=config.cache' - -n, --no-create do not create output files - --srcdir=DIR find the sources in DIR [configure dir or \`..'] - -Installation directories: - --prefix=PREFIX install architecture-independent files in PREFIX - @<:@@S|@ac_default_prefix@:>@ - --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX - @<:@PREFIX@:>@ - -By default, \`make install' will install all the files in -\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify -an installation prefix other than \`$ac_default_prefix' using \`--prefix', -for instance \`--prefix=\$HOME'. - -For better control, use the options below. - -Fine tuning of the installation directories: - --bindir=DIR user executables [EPREFIX/bin] - --sbindir=DIR system admin executables [EPREFIX/sbin] - --libexecdir=DIR program executables [EPREFIX/libexec] - --sysconfdir=DIR read-only single-machine data [PREFIX/etc] - --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com] - --localstatedir=DIR modifiable single-machine data [PREFIX/var] - --libdir=DIR object code libraries [EPREFIX/lib] - --includedir=DIR C header files [PREFIX/include] - --oldincludedir=DIR C header files for non-gcc [/usr/include] - --datarootdir=DIR read-only arch.-independent data root [PREFIX/share] - --datadir=DIR read-only architecture-independent data [DATAROOTDIR] - --infodir=DIR info documentation [DATAROOTDIR/info] - --localedir=DIR locale-dependent data [DATAROOTDIR/locale] - --mandir=DIR man documentation [DATAROOTDIR/man] - --docdir=DIR documentation root @<:@DATAROOTDIR/doc/shairport-c@:>@ - --htmldir=DIR html documentation [DOCDIR] - --dvidir=DIR dvi documentation [DOCDIR] - --pdfdir=DIR pdf documentation [DOCDIR] - --psdir=DIR ps documentation [DOCDIR] -_ACEOF - - cat <<\_ACEOF - -Program names: - --program-prefix=PREFIX prepend PREFIX to installed program names - --program-suffix=SUFFIX append SUFFIX to installed program names - --program-transform-name=PROGRAM run sed PROGRAM on installed program names - -System types: - --build=BUILD configure for building on BUILD [guessed] - --host=HOST cross-compile to build programs to run on HOST [BUILD] -_ACEOF -fi - -if test -n "$ac_init_help"; then - case $ac_init_help in - short | recursive ) echo "Configuration of shairport.c 1.2.0:";; - esac - cat <<\_ACEOF - -Optional Features: - --disable-option-checking ignore unrecognized --enable/--with options - --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no) - --enable-FEATURE[=ARG] include FEATURE [ARG=yes] - --disable-dependency-tracking speeds up one-time build - --enable-dependency-tracking do not reject slow dependency extractors - --enable-static@<:@=PKGS@:>@ build static libraries @<:@default=no@:>@ - --enable-shared@<:@=PKGS@:>@ build shared libraries @<:@default=yes@:>@ - --enable-fast-install@<:@=PKGS@:>@ - optimize for fast installation @<:@default=yes@:>@ - --disable-libtool-lock avoid locking (might break parallel builds) - -Optional Packages: - --with-PACKAGE[=ARG] use PACKAGE [ARG=yes] - --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no) - --with-pic try to use only PIC/non-PIC objects @<:@default=use - both@:>@ - --with-gnu-ld assume the C compiler uses GNU ld @<:@default=no@:>@ - --with-sysroot=DIR Search for dependent libraries within DIR - (or the compiler's sysroot if not specified). - -Some influential environment variables: - CC C compiler command - CFLAGS C compiler flags - LDFLAGS linker flags, e.g. -L if you have libraries in a - nonstandard directory - LIBS libraries to pass to the linker, e.g. -l - CPPFLAGS (Objective) C/C++ preprocessor flags, e.g. -I if - you have headers in a nonstandard directory - CPP C preprocessor - -Use these variables to override the choices made by `configure' or to help -it to find libraries and programs with nonstandard names/locations. - -Report bugs to . -_ACEOF -ac_status=$? -fi - -if test "$ac_init_help" = "recursive"; then - # If there are subdirs, report their specific --help. - for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue - test -d "$ac_dir" || - { cd "$srcdir" && ac_pwd=`pwd` && srcdir=. && test -d "$ac_dir"; } || - continue - ac_builddir=. - -case "$ac_dir" in -.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; -*) - ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'` - # A ".." for each directory in $ac_dir_suffix. - ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` - case $ac_top_builddir_sub in - "") ac_top_builddir_sub=. ac_top_build_prefix= ;; - *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; - esac ;; -esac -ac_abs_top_builddir=$ac_pwd -ac_abs_builddir=$ac_pwd$ac_dir_suffix -# for backward compatibility: -ac_top_builddir=$ac_top_build_prefix - -case $srcdir in - .) # We are building in place. - ac_srcdir=. - ac_top_srcdir=$ac_top_builddir_sub - ac_abs_top_srcdir=$ac_pwd ;; - [\\/]* | ?:[\\/]* ) # Absolute name. - ac_srcdir=$srcdir$ac_dir_suffix; - ac_top_srcdir=$srcdir - ac_abs_top_srcdir=$srcdir ;; - *) # Relative name. - ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix - ac_top_srcdir=$ac_top_build_prefix$srcdir - ac_abs_top_srcdir=$ac_pwd/$srcdir ;; -esac -ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix - - cd "$ac_dir" || { ac_status=$?; continue; } - # Check for guested configure. - if test -f "$ac_srcdir/configure.gnu"; then - echo && - $SHELL "$ac_srcdir/configure.gnu" --help=recursive - elif test -f "$ac_srcdir/configure"; then - echo && - $SHELL "$ac_srcdir/configure" --help=recursive - else - $as_echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2 - fi || ac_status=$? - cd "$ac_pwd" || { ac_status=$?; break; } - done -fi - -test -n "$ac_init_help" && exit $ac_status -if $ac_init_version; then - cat <<\_ACEOF -shairport.c configure 1.2.0 -generated by GNU Autoconf 2.68 - -Copyright (C) 2010 Free Software Foundation, Inc. -This configure script is free software; the Free Software Foundation -gives unlimited permission to copy, distribute and modify it. -_ACEOF - exit -fi - -## ------------------------ ## -## Autoconf initialization. ## -## ------------------------ ## - -@%:@ ac_fn_c_try_compile LINENO -@%:@ -------------------------- -@%:@ Try to compile conftest.@S|@ac_ext, and return whether this succeeded. -ac_fn_c_try_compile () -{ - as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - rm -f conftest.$ac_objext - if { { ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_compile") 2>conftest.err - ac_status=$? - if test -s conftest.err; then - grep -v '^ *+' conftest.err >conftest.er1 - cat conftest.er1 >&5 - mv -f conftest.er1 conftest.err - fi - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then : - ac_retval=0 -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_retval=1 -fi - eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno - as_fn_set_status $ac_retval - -} @%:@ ac_fn_c_try_compile - -@%:@ ac_fn_c_try_link LINENO -@%:@ ----------------------- -@%:@ Try to link conftest.@S|@ac_ext, and return whether this succeeded. -ac_fn_c_try_link () -{ - as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - rm -f conftest.$ac_objext conftest$ac_exeext - if { { ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_link") 2>conftest.err - ac_status=$? - if test -s conftest.err; then - grep -v '^ *+' conftest.err >conftest.er1 - cat conftest.er1 >&5 - mv -f conftest.er1 conftest.err - fi - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && { - test "$cross_compiling" = yes || - $as_test_x conftest$ac_exeext - }; then : - ac_retval=0 -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_retval=1 -fi - # Delete the IPA/IPO (Inter Procedural Analysis/Optimization) information - # created by the PGI compiler (conftest_ipa8_conftest.oo), as it would - # interfere with the next link command; also delete a directory that is - # left behind by Apple's compiler. We do this before executing the actions. - rm -rf conftest.dSYM conftest_ipa8_conftest.oo - eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno - as_fn_set_status $ac_retval - -} @%:@ ac_fn_c_try_link - -@%:@ ac_fn_c_check_header_compile LINENO HEADER VAR INCLUDES -@%:@ ------------------------------------------------------- -@%:@ Tests whether HEADER exists and can be compiled using the include files in -@%:@ INCLUDES, setting the cache variable VAR accordingly. -ac_fn_c_check_header_compile () -{ - as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 -$as_echo_n "checking for $2... " >&6; } -if eval \${$3+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -$4 -@%:@include <$2> -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - eval "$3=yes" -else - eval "$3=no" -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi -eval ac_res=\$$3 - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } - eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno - -} @%:@ ac_fn_c_check_header_compile - -@%:@ ac_fn_c_try_cpp LINENO -@%:@ ---------------------- -@%:@ Try to preprocess conftest.@S|@ac_ext, and return whether this succeeded. -ac_fn_c_try_cpp () -{ - as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - if { { ac_try="$ac_cpp conftest.$ac_ext" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_cpp conftest.$ac_ext") 2>conftest.err - ac_status=$? - if test -s conftest.err; then - grep -v '^ *+' conftest.err >conftest.er1 - cat conftest.er1 >&5 - mv -f conftest.er1 conftest.err - fi - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } > conftest.i && { - test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || - test ! -s conftest.err - }; then : - ac_retval=0 -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_retval=1 -fi - eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno - as_fn_set_status $ac_retval - -} @%:@ ac_fn_c_try_cpp - -@%:@ ac_fn_c_try_run LINENO -@%:@ ---------------------- -@%:@ Try to link conftest.@S|@ac_ext, and return whether this succeeded. Assumes -@%:@ that executables *can* be run. -ac_fn_c_try_run () -{ - as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - if { { ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_link") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } && { ac_try='./conftest$ac_exeext' - { { case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_try") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; }; then : - ac_retval=0 -else - $as_echo "$as_me: program exited with status $ac_status" >&5 - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_retval=$ac_status -fi - rm -rf conftest.dSYM conftest_ipa8_conftest.oo - eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno - as_fn_set_status $ac_retval - -} @%:@ ac_fn_c_try_run - -@%:@ ac_fn_c_check_func LINENO FUNC VAR -@%:@ ---------------------------------- -@%:@ Tests whether FUNC exists, setting the cache variable VAR accordingly -ac_fn_c_check_func () -{ - as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 -$as_echo_n "checking for $2... " >&6; } -if eval \${$3+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -/* Define $2 to an innocuous variant, in case declares $2. - For example, HP-UX 11i declares gettimeofday. */ -#define $2 innocuous_$2 - -/* System header to define __stub macros and hopefully few prototypes, - which can conflict with char $2 (); below. - Prefer to if __STDC__ is defined, since - exists even on freestanding compilers. */ - -#ifdef __STDC__ -# include -#else -# include -#endif - -#undef $2 - -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char $2 (); -/* The GNU C library defines this for functions which it implements - to always fail with ENOSYS. Some functions are actually named - something starting with __ and the normal name is an alias. */ -#if defined __stub_$2 || defined __stub___$2 -choke me -#endif - -int -main () -{ -return $2 (); - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - eval "$3=yes" -else - eval "$3=no" -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -fi -eval ac_res=\$$3 - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } - eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno - -} @%:@ ac_fn_c_check_func -cat >config.log <<_ACEOF -This file contains any messages produced by compilers while -running configure, to aid debugging if configure makes a mistake. - -It was created by shairport.c $as_me 1.2.0, which was -generated by GNU Autoconf 2.68. Invocation command line was - - $ $0 $@ - -_ACEOF -exec 5>>config.log -{ -cat <<_ASUNAME -## --------- ## -## Platform. ## -## --------- ## - -hostname = `(hostname || uname -n) 2>/dev/null | sed 1q` -uname -m = `(uname -m) 2>/dev/null || echo unknown` -uname -r = `(uname -r) 2>/dev/null || echo unknown` -uname -s = `(uname -s) 2>/dev/null || echo unknown` -uname -v = `(uname -v) 2>/dev/null || echo unknown` - -/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown` -/bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown` - -/bin/arch = `(/bin/arch) 2>/dev/null || echo unknown` -/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown` -/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown` -/usr/bin/hostinfo = `(/usr/bin/hostinfo) 2>/dev/null || echo unknown` -/bin/machine = `(/bin/machine) 2>/dev/null || echo unknown` -/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown` -/bin/universe = `(/bin/universe) 2>/dev/null || echo unknown` - -_ASUNAME - -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - $as_echo "PATH: $as_dir" - done -IFS=$as_save_IFS - -} >&5 - -cat >&5 <<_ACEOF - - -## ----------- ## -## Core tests. ## -## ----------- ## - -_ACEOF - - -# Keep a trace of the command line. -# Strip out --no-create and --no-recursion so they do not pile up. -# Strip out --silent because we don't want to record it for future runs. -# Also quote any args containing shell meta-characters. -# Make two passes to allow for proper duplicate-argument suppression. -ac_configure_args= -ac_configure_args0= -ac_configure_args1= -ac_must_keep_next=false -for ac_pass in 1 2 -do - for ac_arg - do - case $ac_arg in - -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;; - -q | -quiet | --quiet | --quie | --qui | --qu | --q \ - | -silent | --silent | --silen | --sile | --sil) - continue ;; - *\'*) - ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; - esac - case $ac_pass in - 1) as_fn_append ac_configure_args0 " '$ac_arg'" ;; - 2) - as_fn_append ac_configure_args1 " '$ac_arg'" - if test $ac_must_keep_next = true; then - ac_must_keep_next=false # Got value, back to normal. - else - case $ac_arg in - *=* | --config-cache | -C | -disable-* | --disable-* \ - | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \ - | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \ - | -with-* | --with-* | -without-* | --without-* | --x) - case "$ac_configure_args0 " in - "$ac_configure_args1"*" '$ac_arg' "* ) continue ;; - esac - ;; - -* ) ac_must_keep_next=true ;; - esac - fi - as_fn_append ac_configure_args " '$ac_arg'" - ;; - esac - done -done -{ ac_configure_args0=; unset ac_configure_args0;} -{ ac_configure_args1=; unset ac_configure_args1;} - -# When interrupted or exit'd, cleanup temporary files, and complete -# config.log. We remove comments because anyway the quotes in there -# would cause problems or look ugly. -# WARNING: Use '\'' to represent an apostrophe within the trap. -# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug. -trap 'exit_status=$? - # Save into config.log some information that might help in debugging. - { - echo - - $as_echo "## ---------------- ## -## Cache variables. ## -## ---------------- ##" - echo - # The following way of writing the cache mishandles newlines in values, -( - for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do - eval ac_val=\$$ac_var - case $ac_val in #( - *${as_nl}*) - case $ac_var in #( - *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5 -$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;; - esac - case $ac_var in #( - _ | IFS | as_nl) ;; #( - BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #( - *) { eval $ac_var=; unset $ac_var;} ;; - esac ;; - esac - done - (set) 2>&1 | - case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #( - *${as_nl}ac_space=\ *) - sed -n \ - "s/'\''/'\''\\\\'\'''\''/g; - s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p" - ;; #( - *) - sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" - ;; - esac | - sort -) - echo - - $as_echo "## ----------------- ## -## Output variables. ## -## ----------------- ##" - echo - for ac_var in $ac_subst_vars - do - eval ac_val=\$$ac_var - case $ac_val in - *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; - esac - $as_echo "$ac_var='\''$ac_val'\''" - done | sort - echo - - if test -n "$ac_subst_files"; then - $as_echo "## ------------------- ## -## File substitutions. ## -## ------------------- ##" - echo - for ac_var in $ac_subst_files - do - eval ac_val=\$$ac_var - case $ac_val in - *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; - esac - $as_echo "$ac_var='\''$ac_val'\''" - done | sort - echo - fi - - if test -s confdefs.h; then - $as_echo "## ----------- ## -## confdefs.h. ## -## ----------- ##" - echo - cat confdefs.h - echo - fi - test "$ac_signal" != 0 && - $as_echo "$as_me: caught signal $ac_signal" - $as_echo "$as_me: exit $exit_status" - } >&5 - rm -f core *.core core.conftest.* && - rm -f -r conftest* confdefs* conf$$* $ac_clean_files && - exit $exit_status -' 0 -for ac_signal in 1 2 13 15; do - trap 'ac_signal='$ac_signal'; as_fn_exit 1' $ac_signal -done -ac_signal=0 - -# confdefs.h avoids OS command line length limits that DEFS can exceed. -rm -f -r conftest* confdefs.h - -$as_echo "/* confdefs.h */" > confdefs.h - -# Predefined preprocessor variables. - -cat >>confdefs.h <<_ACEOF -@%:@define PACKAGE_NAME "$PACKAGE_NAME" -_ACEOF - -cat >>confdefs.h <<_ACEOF -@%:@define PACKAGE_TARNAME "$PACKAGE_TARNAME" -_ACEOF - -cat >>confdefs.h <<_ACEOF -@%:@define PACKAGE_VERSION "$PACKAGE_VERSION" -_ACEOF - -cat >>confdefs.h <<_ACEOF -@%:@define PACKAGE_STRING "$PACKAGE_STRING" -_ACEOF - -cat >>confdefs.h <<_ACEOF -@%:@define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT" -_ACEOF - -cat >>confdefs.h <<_ACEOF -@%:@define PACKAGE_URL "$PACKAGE_URL" -_ACEOF - - -# Let the site file select an alternate cache file if it wants to. -# Prefer an explicitly selected file to automatically selected ones. -ac_site_file1=NONE -ac_site_file2=NONE -if test -n "$CONFIG_SITE"; then - # We do not want a PATH search for config.site. - case $CONFIG_SITE in @%:@(( - -*) ac_site_file1=./$CONFIG_SITE;; - */*) ac_site_file1=$CONFIG_SITE;; - *) ac_site_file1=./$CONFIG_SITE;; - esac -elif test "x$prefix" != xNONE; then - ac_site_file1=$prefix/share/config.site - ac_site_file2=$prefix/etc/config.site -else - ac_site_file1=$ac_default_prefix/share/config.site - ac_site_file2=$ac_default_prefix/etc/config.site -fi -for ac_site_file in "$ac_site_file1" "$ac_site_file2" -do - test "x$ac_site_file" = xNONE && continue - if test /dev/null != "$ac_site_file" && test -r "$ac_site_file"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: loading site script $ac_site_file" >&5 -$as_echo "$as_me: loading site script $ac_site_file" >&6;} - sed 's/^/| /' "$ac_site_file" >&5 - . "$ac_site_file" \ - || { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error $? "failed to load site script $ac_site_file -See \`config.log' for more details" "$LINENO" 5; } - fi -done - -if test -r "$cache_file"; then - # Some versions of bash will fail to source /dev/null (special files - # actually), so we avoid doing that. DJGPP emulates it as a regular file. - if test /dev/null != "$cache_file" && test -f "$cache_file"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: loading cache $cache_file" >&5 -$as_echo "$as_me: loading cache $cache_file" >&6;} - case $cache_file in - [\\/]* | ?:[\\/]* ) . "$cache_file";; - *) . "./$cache_file";; - esac - fi -else - { $as_echo "$as_me:${as_lineno-$LINENO}: creating cache $cache_file" >&5 -$as_echo "$as_me: creating cache $cache_file" >&6;} - >$cache_file -fi - -# Check that the precious variables saved in the cache have kept the same -# value. -ac_cache_corrupted=false -for ac_var in $ac_precious_vars; do - eval ac_old_set=\$ac_cv_env_${ac_var}_set - eval ac_new_set=\$ac_env_${ac_var}_set - eval ac_old_val=\$ac_cv_env_${ac_var}_value - eval ac_new_val=\$ac_env_${ac_var}_value - case $ac_old_set,$ac_new_set in - set,) - { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5 -$as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;} - ac_cache_corrupted=: ;; - ,set) - { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was not set in the previous run" >&5 -$as_echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;} - ac_cache_corrupted=: ;; - ,);; - *) - if test "x$ac_old_val" != "x$ac_new_val"; then - # differences in whitespace do not lead to failure. - ac_old_val_w=`echo x $ac_old_val` - ac_new_val_w=`echo x $ac_new_val` - if test "$ac_old_val_w" != "$ac_new_val_w"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' has changed since the previous run:" >&5 -$as_echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;} - ac_cache_corrupted=: - else - { $as_echo "$as_me:${as_lineno-$LINENO}: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5 -$as_echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;} - eval $ac_var=\$ac_old_val - fi - { $as_echo "$as_me:${as_lineno-$LINENO}: former value: \`$ac_old_val'" >&5 -$as_echo "$as_me: former value: \`$ac_old_val'" >&2;} - { $as_echo "$as_me:${as_lineno-$LINENO}: current value: \`$ac_new_val'" >&5 -$as_echo "$as_me: current value: \`$ac_new_val'" >&2;} - fi;; - esac - # Pass precious variables to config.status. - if test "$ac_new_set" = set; then - case $ac_new_val in - *\'*) ac_arg=$ac_var=`$as_echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;; - *) ac_arg=$ac_var=$ac_new_val ;; - esac - case " $ac_configure_args " in - *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy. - *) as_fn_append ac_configure_args " '$ac_arg'" ;; - esac - fi -done -if $ac_cache_corrupted; then - { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} - { $as_echo "$as_me:${as_lineno-$LINENO}: error: changes in the environment can compromise the build" >&5 -$as_echo "$as_me: error: changes in the environment can compromise the build" >&2;} - as_fn_error $? "run \`make distclean' and/or \`rm $cache_file' and start over" "$LINENO" 5 -fi -## -------------------- ## -## Main body of script. ## -## -------------------- ## - -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - - -am__api_version='1.11' - -ac_aux_dir= -for ac_dir in "$srcdir" "$srcdir/.." "$srcdir/../.."; do - if test -f "$ac_dir/install-sh"; then - ac_aux_dir=$ac_dir - ac_install_sh="$ac_aux_dir/install-sh -c" - break - elif test -f "$ac_dir/install.sh"; then - ac_aux_dir=$ac_dir - ac_install_sh="$ac_aux_dir/install.sh -c" - break - elif test -f "$ac_dir/shtool"; then - ac_aux_dir=$ac_dir - ac_install_sh="$ac_aux_dir/shtool install -c" - break - fi -done -if test -z "$ac_aux_dir"; then - as_fn_error $? "cannot find install-sh, install.sh, or shtool in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" "$LINENO" 5 -fi - -# These three variables are undocumented and unsupported, -# and are intended to be withdrawn in a future Autoconf release. -# They can cause serious problems if a builder's source tree is in a directory -# whose full name contains unusual characters. -ac_config_guess="$SHELL $ac_aux_dir/config.guess" # Please don't use this var. -ac_config_sub="$SHELL $ac_aux_dir/config.sub" # Please don't use this var. -ac_configure="$SHELL $ac_aux_dir/configure" # Please don't use this var. - - -# Find a good install program. We prefer a C program (faster), -# so one script is as good as another. But avoid the broken or -# incompatible versions: -# SysV /etc/install, /usr/sbin/install -# SunOS /usr/etc/install -# IRIX /sbin/install -# AIX /bin/install -# AmigaOS /C/install, which installs bootblocks on floppy discs -# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag -# AFS /usr/afsws/bin/install, which mishandles nonexistent args -# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" -# OS/2's system install, which has a completely different semantic -# ./install, which can be erroneously created by make from ./install.sh. -# Reject install programs that cannot install multiple files. -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a BSD-compatible install" >&5 -$as_echo_n "checking for a BSD-compatible install... " >&6; } -if test -z "$INSTALL"; then -if ${ac_cv_path_install+:} false; then : - $as_echo_n "(cached) " >&6 -else - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - # Account for people who put trailing slashes in PATH elements. -case $as_dir/ in @%:@(( - ./ | .// | /[cC]/* | \ - /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \ - ?:[\\/]os2[\\/]install[\\/]* | ?:[\\/]OS2[\\/]INSTALL[\\/]* | \ - /usr/ucb/* ) ;; - *) - # OSF1 and SCO ODT 3.0 have their own names for install. - # Don't use installbsd from OSF since it installs stuff as root - # by default. - for ac_prog in ginstall scoinst install; do - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; }; then - if test $ac_prog = install && - grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then - # AIX install. It has an incompatible calling convention. - : - elif test $ac_prog = install && - grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then - # program-specific install script used by HP pwplus--don't use. - : - else - rm -rf conftest.one conftest.two conftest.dir - echo one > conftest.one - echo two > conftest.two - mkdir conftest.dir - if "$as_dir/$ac_prog$ac_exec_ext" -c conftest.one conftest.two "`pwd`/conftest.dir" && - test -s conftest.one && test -s conftest.two && - test -s conftest.dir/conftest.one && - test -s conftest.dir/conftest.two - then - ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c" - break 3 - fi - fi - fi - done - done - ;; -esac - - done -IFS=$as_save_IFS - -rm -rf conftest.one conftest.two conftest.dir - -fi - if test "${ac_cv_path_install+set}" = set; then - INSTALL=$ac_cv_path_install - else - # As a last resort, use the slow shell script. Don't cache a - # value for INSTALL within a source directory, because that will - # break other packages using the cache if that directory is - # removed, or if the value is a relative name. - INSTALL=$ac_install_sh - fi -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $INSTALL" >&5 -$as_echo "$INSTALL" >&6; } - -# Use test -z because SunOS4 sh mishandles braces in ${var-val}. -# It thinks the first close brace ends the variable substitution. -test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' - -test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}' - -test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether build environment is sane" >&5 -$as_echo_n "checking whether build environment is sane... " >&6; } -# Just in case -sleep 1 -echo timestamp > conftest.file -# Reject unsafe characters in $srcdir or the absolute working directory -# name. Accept space and tab only in the latter. -am_lf=' -' -case `pwd` in - *[\\\"\#\$\&\'\`$am_lf]*) - as_fn_error $? "unsafe absolute working directory name" "$LINENO" 5;; -esac -case $srcdir in - *[\\\"\#\$\&\'\`$am_lf\ \ ]*) - as_fn_error $? "unsafe srcdir value: \`$srcdir'" "$LINENO" 5;; -esac - -# Do `set' in a subshell so we don't clobber the current shell's -# arguments. Must try -L first in case configure is actually a -# symlink; some systems play weird games with the mod time of symlinks -# (eg FreeBSD returns the mod time of the symlink's containing -# directory). -if ( - set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null` - if test "$*" = "X"; then - # -L didn't work. - set X `ls -t "$srcdir/configure" conftest.file` - fi - rm -f conftest.file - if test "$*" != "X $srcdir/configure conftest.file" \ - && test "$*" != "X conftest.file $srcdir/configure"; then - - # If neither matched, then we have a broken ls. This can happen - # if, for instance, CONFIG_SHELL is bash and it inherits a - # broken ls alias from the environment. This has actually - # happened. Such a system could not be considered "sane". - as_fn_error $? "ls -t appears to fail. Make sure there is not a broken -alias in your environment" "$LINENO" 5 - fi - - test "$2" = conftest.file - ) -then - # Ok. - : -else - as_fn_error $? "newly created file is older than distributed files! -Check your system clock" "$LINENO" 5 -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -$as_echo "yes" >&6; } -test "$program_prefix" != NONE && - program_transform_name="s&^&$program_prefix&;$program_transform_name" -# Use a double $ so make ignores it. -test "$program_suffix" != NONE && - program_transform_name="s&\$&$program_suffix&;$program_transform_name" -# Double any \ or $. -# By default was `s,x,x', remove it if useless. -ac_script='s/[\\$]/&&/g;s/;s,x,x,$//' -program_transform_name=`$as_echo "$program_transform_name" | sed "$ac_script"` - -# expand $ac_aux_dir to an absolute path -am_aux_dir=`cd $ac_aux_dir && pwd` - -if test x"${MISSING+set}" != xset; then - case $am_aux_dir in - *\ * | *\ *) - MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;; - *) - MISSING="\${SHELL} $am_aux_dir/missing" ;; - esac -fi -# Use eval to expand $SHELL -if eval "$MISSING --run true"; then - am_missing_run="$MISSING --run " -else - am_missing_run= - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`missing' script is too old or missing" >&5 -$as_echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;} -fi - -if test x"${install_sh}" != xset; then - case $am_aux_dir in - *\ * | *\ *) - install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;; - *) - install_sh="\${SHELL} $am_aux_dir/install-sh" - esac -fi - -# Installed binaries are usually stripped using `strip' when the user -# run `make install-strip'. However `strip' might not be the right -# tool to use in cross-compilation environments, therefore Automake -# will honor the `STRIP' environment variable to overrule this program. -if test "$cross_compiling" != no; then - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. -set dummy ${ac_tool_prefix}strip; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_STRIP+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$STRIP"; then - ac_cv_prog_STRIP="$STRIP" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_STRIP="${ac_tool_prefix}strip" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -STRIP=$ac_cv_prog_STRIP -if test -n "$STRIP"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5 -$as_echo "$STRIP" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -fi -if test -z "$ac_cv_prog_STRIP"; then - ac_ct_STRIP=$STRIP - # Extract the first word of "strip", so it can be a program name with args. -set dummy strip; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_STRIP+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_STRIP"; then - ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_STRIP="strip" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP -if test -n "$ac_ct_STRIP"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5 -$as_echo "$ac_ct_STRIP" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - if test "x$ac_ct_STRIP" = x; then - STRIP=":" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - STRIP=$ac_ct_STRIP - fi -else - STRIP="$ac_cv_prog_STRIP" -fi - -fi -INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s" - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a thread-safe mkdir -p" >&5 -$as_echo_n "checking for a thread-safe mkdir -p... " >&6; } -if test -z "$MKDIR_P"; then - if ${ac_cv_path_mkdir+:} false; then : - $as_echo_n "(cached) " >&6 -else - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH$PATH_SEPARATOR/opt/sfw/bin -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_prog in mkdir gmkdir; do - for ac_exec_ext in '' $ac_executable_extensions; do - { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; } || continue - case `"$as_dir/$ac_prog$ac_exec_ext" --version 2>&1` in #( - 'mkdir (GNU coreutils) '* | \ - 'mkdir (coreutils) '* | \ - 'mkdir (fileutils) '4.1*) - ac_cv_path_mkdir=$as_dir/$ac_prog$ac_exec_ext - break 3;; - esac - done - done - done -IFS=$as_save_IFS - -fi - - test -d ./--version && rmdir ./--version - if test "${ac_cv_path_mkdir+set}" = set; then - MKDIR_P="$ac_cv_path_mkdir -p" - else - # As a last resort, use the slow shell script. Don't cache a - # value for MKDIR_P within a source directory, because that will - # break other packages using the cache if that directory is - # removed, or if the value is a relative name. - MKDIR_P="$ac_install_sh -d" - fi -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $MKDIR_P" >&5 -$as_echo "$MKDIR_P" >&6; } - -mkdir_p="$MKDIR_P" -case $mkdir_p in - [\\/$]* | ?:[\\/]*) ;; - */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;; -esac - -for ac_prog in gawk mawk nawk awk -do - # Extract the first word of "$ac_prog", so it can be a program name with args. -set dummy $ac_prog; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_AWK+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$AWK"; then - ac_cv_prog_AWK="$AWK" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_AWK="$ac_prog" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -AWK=$ac_cv_prog_AWK -if test -n "$AWK"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AWK" >&5 -$as_echo "$AWK" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - test -n "$AWK" && break -done - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ${MAKE-make} sets \$(MAKE)" >&5 -$as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; } -set x ${MAKE-make} -ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'` -if eval \${ac_cv_prog_make_${ac_make}_set+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat >conftest.make <<\_ACEOF -SHELL = /bin/sh -all: - @echo '@@@%%%=$(MAKE)=@@@%%%' -_ACEOF -# GNU make sometimes prints "make[1]: Entering ...", which would confuse us. -case `${MAKE-make} -f conftest.make 2>/dev/null` in - *@@@%%%=?*=@@@%%%*) - eval ac_cv_prog_make_${ac_make}_set=yes;; - *) - eval ac_cv_prog_make_${ac_make}_set=no;; -esac -rm -f conftest.make -fi -if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -$as_echo "yes" >&6; } - SET_MAKE= -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } - SET_MAKE="MAKE=${MAKE-make}" -fi - -rm -rf .tst 2>/dev/null -mkdir .tst 2>/dev/null -if test -d .tst; then - am__leading_dot=. -else - am__leading_dot=_ -fi -rmdir .tst 2>/dev/null - -if test "`cd $srcdir && pwd`" != "`pwd`"; then - # Use -I$(srcdir) only when $(srcdir) != ., so that make's output - # is not polluted with repeated "-I." - am__isrc=' -I$(srcdir)' - # test to see if srcdir already configured - if test -f $srcdir/config.status; then - as_fn_error $? "source directory already configured; run \"make distclean\" there first" "$LINENO" 5 - fi -fi - -# test whether we have cygpath -if test -z "$CYGPATH_W"; then - if (cygpath --version) >/dev/null 2>/dev/null; then - CYGPATH_W='cygpath -w' - else - CYGPATH_W=echo - fi -fi - - -# Define the identity of the package. - PACKAGE=shairport - VERSION=1.2.0 - - -cat >>confdefs.h <<_ACEOF -@%:@define PACKAGE "$PACKAGE" -_ACEOF - - -cat >>confdefs.h <<_ACEOF -@%:@define VERSION "$VERSION" -_ACEOF - -# Some tools Automake needs. - -ACLOCAL=${ACLOCAL-"${am_missing_run}aclocal-${am__api_version}"} - - -AUTOCONF=${AUTOCONF-"${am_missing_run}autoconf"} - - -AUTOMAKE=${AUTOMAKE-"${am_missing_run}automake-${am__api_version}"} - - -AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"} - - -MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"} - -# We need awk for the "check" target. The system "awk" is bad on -# some platforms. -# Always define AMTAR for backward compatibility. - -AMTAR=${AMTAR-"${am_missing_run}tar"} - -am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -' - - - - - -ac_config_headers="$ac_config_headers config.h" - -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu -if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args. -set dummy ${ac_tool_prefix}gcc; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_CC+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_CC="${ac_tool_prefix}gcc" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -CC=$ac_cv_prog_CC -if test -n "$CC"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 -$as_echo "$CC" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -fi -if test -z "$ac_cv_prog_CC"; then - ac_ct_CC=$CC - # Extract the first word of "gcc", so it can be a program name with args. -set dummy gcc; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_CC+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_CC"; then - ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_CC="gcc" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_CC=$ac_cv_prog_ac_ct_CC -if test -n "$ac_ct_CC"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 -$as_echo "$ac_ct_CC" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - if test "x$ac_ct_CC" = x; then - CC="" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - CC=$ac_ct_CC - fi -else - CC="$ac_cv_prog_CC" -fi - -if test -z "$CC"; then - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. -set dummy ${ac_tool_prefix}cc; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_CC+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_CC="${ac_tool_prefix}cc" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -CC=$ac_cv_prog_CC -if test -n "$CC"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 -$as_echo "$CC" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - fi -fi -if test -z "$CC"; then - # Extract the first word of "cc", so it can be a program name with args. -set dummy cc; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_CC+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else - ac_prog_rejected=no -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then - ac_prog_rejected=yes - continue - fi - ac_cv_prog_CC="cc" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -if test $ac_prog_rejected = yes; then - # We found a bogon in the path, so make sure we never use it. - set dummy $ac_cv_prog_CC - shift - if test $@%:@ != 0; then - # We chose a different compiler from the bogus one. - # However, it has the same basename, so the bogon will be chosen - # first if we set CC to just the basename; use the full file name. - shift - ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@" - fi -fi -fi -fi -CC=$ac_cv_prog_CC -if test -n "$CC"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 -$as_echo "$CC" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -fi -if test -z "$CC"; then - if test -n "$ac_tool_prefix"; then - for ac_prog in cl.exe - do - # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. -set dummy $ac_tool_prefix$ac_prog; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_CC+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_CC="$ac_tool_prefix$ac_prog" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -CC=$ac_cv_prog_CC -if test -n "$CC"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 -$as_echo "$CC" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - test -n "$CC" && break - done -fi -if test -z "$CC"; then - ac_ct_CC=$CC - for ac_prog in cl.exe -do - # Extract the first word of "$ac_prog", so it can be a program name with args. -set dummy $ac_prog; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_CC+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_CC"; then - ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_CC="$ac_prog" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_CC=$ac_cv_prog_ac_ct_CC -if test -n "$ac_ct_CC"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 -$as_echo "$ac_ct_CC" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - test -n "$ac_ct_CC" && break -done - - if test "x$ac_ct_CC" = x; then - CC="" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - CC=$ac_ct_CC - fi -fi - -fi - - -test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error $? "no acceptable C compiler found in \$PATH -See \`config.log' for more details" "$LINENO" 5; } - -# Provide some information about the compiler. -$as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5 -set X $ac_compile -ac_compiler=$2 -for ac_option in --version -v -V -qversion; do - { { ac_try="$ac_compiler $ac_option >&5" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_compiler $ac_option >&5") 2>conftest.err - ac_status=$? - if test -s conftest.err; then - sed '10a\ -... rest of stderr output deleted ... - 10q' conftest.err >conftest.er1 - cat conftest.er1 >&5 - fi - rm -f conftest.er1 conftest.err - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } -done - -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -ac_clean_files_save=$ac_clean_files -ac_clean_files="$ac_clean_files a.out a.out.dSYM a.exe b.out" -# Try to create an executable without -o first, disregard a.out. -# It will help us diagnose broken compilers, and finding out an intuition -# of exeext. -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler works" >&5 -$as_echo_n "checking whether the C compiler works... " >&6; } -ac_link_default=`$as_echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'` - -# The possible output files: -ac_files="a.out conftest.exe conftest a.exe a_out.exe b.out conftest.*" - -ac_rmfiles= -for ac_file in $ac_files -do - case $ac_file in - *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; - * ) ac_rmfiles="$ac_rmfiles $ac_file";; - esac -done -rm -f $ac_rmfiles - -if { { ac_try="$ac_link_default" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_link_default") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then : - # Autoconf-2.13 could set the ac_cv_exeext variable to `no'. -# So ignore a value of `no', otherwise this would lead to `EXEEXT = no' -# in a Makefile. We should not override ac_cv_exeext if it was cached, -# so that the user can short-circuit this test for compilers unknown to -# Autoconf. -for ac_file in $ac_files '' -do - test -f "$ac_file" || continue - case $ac_file in - *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) - ;; - [ab].out ) - # We found the default executable, but exeext='' is most - # certainly right. - break;; - *.* ) - if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no; - then :; else - ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` - fi - # We set ac_cv_exeext here because the later test for it is not - # safe: cross compilers may not add the suffix if given an `-o' - # argument, so we may need to know it at that point already. - # Even if this section looks crufty: it has the advantage of - # actually working. - break;; - * ) - break;; - esac -done -test "$ac_cv_exeext" = no && ac_cv_exeext= - -else - ac_file='' -fi -if test -z "$ac_file"; then : - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -$as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error 77 "C compiler cannot create executables -See \`config.log' for more details" "$LINENO" 5; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -$as_echo "yes" >&6; } -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler default output file name" >&5 -$as_echo_n "checking for C compiler default output file name... " >&6; } -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_file" >&5 -$as_echo "$ac_file" >&6; } -ac_exeext=$ac_cv_exeext - -rm -f -r a.out a.out.dSYM a.exe conftest$ac_cv_exeext b.out -ac_clean_files=$ac_clean_files_save -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of executables" >&5 -$as_echo_n "checking for suffix of executables... " >&6; } -if { { ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_link") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then : - # If both `conftest.exe' and `conftest' are `present' (well, observable) -# catch `conftest.exe'. For instance with Cygwin, `ls conftest' will -# work properly (i.e., refer to `conftest.exe'), while it won't with -# `rm'. -for ac_file in conftest.exe conftest conftest.*; do - test -f "$ac_file" || continue - case $ac_file in - *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; - *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` - break;; - * ) break;; - esac -done -else - { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error $? "cannot compute suffix of executables: cannot compile and link -See \`config.log' for more details" "$LINENO" 5; } -fi -rm -f conftest conftest$ac_cv_exeext -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_exeext" >&5 -$as_echo "$ac_cv_exeext" >&6; } - -rm -f conftest.$ac_ext -EXEEXT=$ac_cv_exeext -ac_exeext=$EXEEXT -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -@%:@include -int -main () -{ -FILE *f = fopen ("conftest.out", "w"); - return ferror (f) || fclose (f) != 0; - - ; - return 0; -} -_ACEOF -ac_clean_files="$ac_clean_files conftest.out" -# Check that the compiler produces executables we can run. If not, either -# the compiler is broken, or we cross compile. -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are cross compiling" >&5 -$as_echo_n "checking whether we are cross compiling... " >&6; } -if test "$cross_compiling" != yes; then - { { ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_link") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } - if { ac_try='./conftest$ac_cv_exeext' - { { case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_try") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; }; then - cross_compiling=no - else - if test "$cross_compiling" = maybe; then - cross_compiling=yes - else - { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error $? "cannot run C compiled programs. -If you meant to cross compile, use \`--host'. -See \`config.log' for more details" "$LINENO" 5; } - fi - fi -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $cross_compiling" >&5 -$as_echo "$cross_compiling" >&6; } - -rm -f conftest.$ac_ext conftest$ac_cv_exeext conftest.out -ac_clean_files=$ac_clean_files_save -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of object files" >&5 -$as_echo_n "checking for suffix of object files... " >&6; } -if ${ac_cv_objext+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -rm -f conftest.o conftest.obj -if { { ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_compile") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then : - for ac_file in conftest.o conftest.obj conftest.*; do - test -f "$ac_file" || continue; - case $ac_file in - *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM ) ;; - *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'` - break;; - esac -done -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error $? "cannot compute suffix of object files: cannot compile -See \`config.log' for more details" "$LINENO" 5; } -fi -rm -f conftest.$ac_cv_objext conftest.$ac_ext -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_objext" >&5 -$as_echo "$ac_cv_objext" >&6; } -OBJEXT=$ac_cv_objext -ac_objext=$OBJEXT -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C compiler" >&5 -$as_echo_n "checking whether we are using the GNU C compiler... " >&6; } -if ${ac_cv_c_compiler_gnu+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ -#ifndef __GNUC__ - choke me -#endif - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - ac_compiler_gnu=yes -else - ac_compiler_gnu=no -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -ac_cv_c_compiler_gnu=$ac_compiler_gnu - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_compiler_gnu" >&5 -$as_echo "$ac_cv_c_compiler_gnu" >&6; } -if test $ac_compiler_gnu = yes; then - GCC=yes -else - GCC= -fi -ac_test_CFLAGS=${CFLAGS+set} -ac_save_CFLAGS=$CFLAGS -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5 -$as_echo_n "checking whether $CC accepts -g... " >&6; } -if ${ac_cv_prog_cc_g+:} false; then : - $as_echo_n "(cached) " >&6 -else - ac_save_c_werror_flag=$ac_c_werror_flag - ac_c_werror_flag=yes - ac_cv_prog_cc_g=no - CFLAGS="-g" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - ac_cv_prog_cc_g=yes -else - CFLAGS="" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - -else - ac_c_werror_flag=$ac_save_c_werror_flag - CFLAGS="-g" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - ac_cv_prog_cc_g=yes -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - ac_c_werror_flag=$ac_save_c_werror_flag -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_g" >&5 -$as_echo "$ac_cv_prog_cc_g" >&6; } -if test "$ac_test_CFLAGS" = set; then - CFLAGS=$ac_save_CFLAGS -elif test $ac_cv_prog_cc_g = yes; then - if test "$GCC" = yes; then - CFLAGS="-g -O2" - else - CFLAGS="-g" - fi -else - if test "$GCC" = yes; then - CFLAGS="-O2" - else - CFLAGS= - fi -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5 -$as_echo_n "checking for $CC option to accept ISO C89... " >&6; } -if ${ac_cv_prog_cc_c89+:} false; then : - $as_echo_n "(cached) " >&6 -else - ac_cv_prog_cc_c89=no -ac_save_CC=$CC -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include -#include -#include -#include -/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */ -struct buf { int x; }; -FILE * (*rcsopen) (struct buf *, struct stat *, int); -static char *e (p, i) - char **p; - int i; -{ - return p[i]; -} -static char *f (char * (*g) (char **, int), char **p, ...) -{ - char *s; - va_list v; - va_start (v,p); - s = g (p, va_arg (v,int)); - va_end (v); - return s; -} - -/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has - function prototypes and stuff, but not '\xHH' hex character constants. - These don't provoke an error unfortunately, instead are silently treated - as 'x'. The following induces an error, until -std is added to get - proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an - array size at least. It's necessary to write '\x00'==0 to get something - that's true only with -std. */ -int osf4_cc_array ['\x00' == 0 ? 1 : -1]; - -/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters - inside strings and character constants. */ -#define FOO(x) 'x' -int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1]; - -int test (int i, double x); -struct s1 {int (*f) (int a);}; -struct s2 {int (*f) (double a);}; -int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int); -int argc; -char **argv; -int -main () -{ -return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1]; - ; - return 0; -} -_ACEOF -for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \ - -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" -do - CC="$ac_save_CC $ac_arg" - if ac_fn_c_try_compile "$LINENO"; then : - ac_cv_prog_cc_c89=$ac_arg -fi -rm -f core conftest.err conftest.$ac_objext - test "x$ac_cv_prog_cc_c89" != "xno" && break -done -rm -f conftest.$ac_ext -CC=$ac_save_CC - -fi -# AC_CACHE_VAL -case "x$ac_cv_prog_cc_c89" in - x) - { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5 -$as_echo "none needed" >&6; } ;; - xno) - { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5 -$as_echo "unsupported" >&6; } ;; - *) - CC="$CC $ac_cv_prog_cc_c89" - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5 -$as_echo "$ac_cv_prog_cc_c89" >&6; } ;; -esac -if test "x$ac_cv_prog_cc_c89" != xno; then : - -fi - -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu -DEPDIR="${am__leading_dot}deps" - -ac_config_commands="$ac_config_commands depfiles" - - -am_make=${MAKE-make} -cat > confinc << 'END' -am__doit: - @echo this is the am__doit target -.PHONY: am__doit -END -# If we don't find an include directive, just comment out the code. -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for style of include used by $am_make" >&5 -$as_echo_n "checking for style of include used by $am_make... " >&6; } -am__include="#" -am__quote= -_am_result=none -# First try GNU make style include. -echo "include confinc" > confmf -# Ignore all kinds of additional output from `make'. -case `$am_make -s -f confmf 2> /dev/null` in #( -*the\ am__doit\ target*) - am__include=include - am__quote= - _am_result=GNU - ;; -esac -# Now try BSD make style include. -if test "$am__include" = "#"; then - echo '.include "confinc"' > confmf - case `$am_make -s -f confmf 2> /dev/null` in #( - *the\ am__doit\ target*) - am__include=.include - am__quote="\"" - _am_result=BSD - ;; - esac -fi - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $_am_result" >&5 -$as_echo "$_am_result" >&6; } -rm -f confinc confmf - -@%:@ Check whether --enable-dependency-tracking was given. -if test "${enable_dependency_tracking+set}" = set; then : - enableval=$enable_dependency_tracking; -fi - -if test "x$enable_dependency_tracking" != xno; then - am_depcomp="$ac_aux_dir/depcomp" - AMDEPBACKSLASH='\' -fi - if test "x$enable_dependency_tracking" != xno; then - AMDEP_TRUE= - AMDEP_FALSE='#' -else - AMDEP_TRUE='#' - AMDEP_FALSE= -fi - - - -depcc="$CC" am_compiler_list= - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5 -$as_echo_n "checking dependency style of $depcc... " >&6; } -if ${am_cv_CC_dependencies_compiler_type+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then - # We make a subdir and do the tests there. Otherwise we can end up - # making bogus files that we don't know about and never remove. For - # instance it was reported that on HP-UX the gcc test will end up - # making a dummy file named `D' -- because `-MD' means `put the output - # in D'. - mkdir conftest.dir - # Copy depcomp to subdir because otherwise we won't find it if we're - # using a relative directory. - cp "$am_depcomp" conftest.dir - cd conftest.dir - # We will build objects and dependencies in a subdirectory because - # it helps to detect inapplicable dependency modes. For instance - # both Tru64's cc and ICC support -MD to output dependencies as a - # side effect of compilation, but ICC will put the dependencies in - # the current directory while Tru64 will put them in the object - # directory. - mkdir sub - - am_cv_CC_dependencies_compiler_type=none - if test "$am_compiler_list" = ""; then - am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp` - fi - am__universal=false - case " $depcc " in #( - *\ -arch\ *\ -arch\ *) am__universal=true ;; - esac - - for depmode in $am_compiler_list; do - # Setup a source with many dependencies, because some compilers - # like to wrap large dependency lists on column 80 (with \), and - # we should not choose a depcomp mode which is confused by this. - # - # We need to recreate these files for each test, as the compiler may - # overwrite some of them when testing with obscure command lines. - # This happens at least with the AIX C compiler. - : > sub/conftest.c - for i in 1 2 3 4 5 6; do - echo '#include "conftst'$i'.h"' >> sub/conftest.c - # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with - # Solaris 8's {/usr,}/bin/sh. - touch sub/conftst$i.h - done - echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf - - # We check with `-c' and `-o' for the sake of the "dashmstdout" - # mode. It turns out that the SunPro C++ compiler does not properly - # handle `-M -o', and we need to detect this. Also, some Intel - # versions had trouble with output in subdirs - am__obj=sub/conftest.${OBJEXT-o} - am__minus_obj="-o $am__obj" - case $depmode in - gcc) - # This depmode causes a compiler race in universal mode. - test "$am__universal" = false || continue - ;; - nosideeffect) - # after this tag, mechanisms are not by side-effect, so they'll - # only be used when explicitly requested - if test "x$enable_dependency_tracking" = xyes; then - continue - else - break - fi - ;; - msvisualcpp | msvcmsys) - # This compiler won't grok `-c -o', but also, the minuso test has - # not run yet. These depmodes are late enough in the game, and - # so weak that their functioning should not be impacted. - am__obj=conftest.${OBJEXT-o} - am__minus_obj= - ;; - none) break ;; - esac - if depmode=$depmode \ - source=sub/conftest.c object=$am__obj \ - depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ - $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \ - >/dev/null 2>conftest.err && - grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && - grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && - grep $am__obj sub/conftest.Po > /dev/null 2>&1 && - ${MAKE-make} -s -f confmf > /dev/null 2>&1; then - # icc doesn't choke on unknown options, it will just issue warnings - # or remarks (even with -Werror). So we grep stderr for any message - # that says an option was ignored or not supported. - # When given -MP, icc 7.0 and 7.1 complain thusly: - # icc: Command line warning: ignoring option '-M'; no argument required - # The diagnosis changed in icc 8.0: - # icc: Command line remark: option '-MP' not supported - if (grep 'ignoring option' conftest.err || - grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else - am_cv_CC_dependencies_compiler_type=$depmode - break - fi - fi - done - - cd .. - rm -rf conftest.dir -else - am_cv_CC_dependencies_compiler_type=none -fi - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_CC_dependencies_compiler_type" >&5 -$as_echo "$am_cv_CC_dependencies_compiler_type" >&6; } -CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type - - if - test "x$enable_dependency_tracking" != xno \ - && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then - am__fastdepCC_TRUE= - am__fastdepCC_FALSE='#' -else - am__fastdepCC_TRUE='#' - am__fastdepCC_FALSE= -fi - - - -@%:@ Check whether --enable-static was given. -if test "${enable_static+set}" = set; then : - enableval=$enable_static; p=${PACKAGE-default} - case $enableval in - yes) enable_static=yes ;; - no) enable_static=no ;; - *) - enable_static=no - # Look at the argument we got. We use all the common list separators. - lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," - for pkg in $enableval; do - IFS="$lt_save_ifs" - if test "X$pkg" = "X$p"; then - enable_static=yes - fi - done - IFS="$lt_save_ifs" - ;; - esac -else - enable_static=no -fi - - - - - - - - - -case `pwd` in - *\ * | *\ *) - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&5 -$as_echo "$as_me: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&2;} ;; -esac - - - -macro_version='2.4' -macro_revision='1.3293' - - - - - - - - - - - - - -ltmain="$ac_aux_dir/ltmain.sh" - -# Make sure we can run config.sub. -$SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 || - as_fn_error $? "cannot run $SHELL $ac_aux_dir/config.sub" "$LINENO" 5 - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking build system type" >&5 -$as_echo_n "checking build system type... " >&6; } -if ${ac_cv_build+:} false; then : - $as_echo_n "(cached) " >&6 -else - ac_build_alias=$build_alias -test "x$ac_build_alias" = x && - ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"` -test "x$ac_build_alias" = x && - as_fn_error $? "cannot guess build type; you must specify one" "$LINENO" 5 -ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` || - as_fn_error $? "$SHELL $ac_aux_dir/config.sub $ac_build_alias failed" "$LINENO" 5 - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_build" >&5 -$as_echo "$ac_cv_build" >&6; } -case $ac_cv_build in -*-*-*) ;; -*) as_fn_error $? "invalid value of canonical build" "$LINENO" 5;; -esac -build=$ac_cv_build -ac_save_IFS=$IFS; IFS='-' -set x $ac_cv_build -shift -build_cpu=$1 -build_vendor=$2 -shift; shift -# Remember, the first character of IFS is used to create $*, -# except with old shells: -build_os=$* -IFS=$ac_save_IFS -case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking host system type" >&5 -$as_echo_n "checking host system type... " >&6; } -if ${ac_cv_host+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test "x$host_alias" = x; then - ac_cv_host=$ac_cv_build -else - ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` || - as_fn_error $? "$SHELL $ac_aux_dir/config.sub $host_alias failed" "$LINENO" 5 -fi - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_host" >&5 -$as_echo "$ac_cv_host" >&6; } -case $ac_cv_host in -*-*-*) ;; -*) as_fn_error $? "invalid value of canonical host" "$LINENO" 5;; -esac -host=$ac_cv_host -ac_save_IFS=$IFS; IFS='-' -set x $ac_cv_host -shift -host_cpu=$1 -host_vendor=$2 -shift; shift -# Remember, the first character of IFS is used to create $*, -# except with old shells: -host_os=$* -IFS=$ac_save_IFS -case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac - - -# Backslashify metacharacters that are still active within -# double-quoted strings. -sed_quote_subst='s/\(["`$\\]\)/\\\1/g' - -# Same as above, but do not quote variable references. -double_quote_subst='s/\(["`\\]\)/\\\1/g' - -# Sed substitution to delay expansion of an escaped shell variable in a -# double_quote_subst'ed string. -delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g' - -# Sed substitution to delay expansion of an escaped single quote. -delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g' - -# Sed substitution to avoid accidental globbing in evaled expressions -no_glob_subst='s/\*/\\\*/g' - -ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' -ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO -ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to print strings" >&5 -$as_echo_n "checking how to print strings... " >&6; } -# Test print first, because it will be a builtin if present. -if test "X`( print -r -- -n ) 2>/dev/null`" = X-n && \ - test "X`print -r -- $ECHO 2>/dev/null`" = "X$ECHO"; then - ECHO='print -r --' -elif test "X`printf %s $ECHO 2>/dev/null`" = "X$ECHO"; then - ECHO='printf %s\n' -else - # Use this function as a fallback that always works. - func_fallback_echo () - { - eval 'cat <<_LTECHO_EOF -$1 -_LTECHO_EOF' - } - ECHO='func_fallback_echo' -fi - -# func_echo_all arg... -# Invoke $ECHO with all args, space-separated. -func_echo_all () -{ - $ECHO "" -} - -case "$ECHO" in - printf*) { $as_echo "$as_me:${as_lineno-$LINENO}: result: printf" >&5 -$as_echo "printf" >&6; } ;; - print*) { $as_echo "$as_me:${as_lineno-$LINENO}: result: print -r" >&5 -$as_echo "print -r" >&6; } ;; - *) { $as_echo "$as_me:${as_lineno-$LINENO}: result: cat" >&5 -$as_echo "cat" >&6; } ;; -esac - - - - - - - - - - - - - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a sed that does not truncate output" >&5 -$as_echo_n "checking for a sed that does not truncate output... " >&6; } -if ${ac_cv_path_SED+:} false; then : - $as_echo_n "(cached) " >&6 -else - ac_script=s/aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa/bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb/ - for ac_i in 1 2 3 4 5 6 7; do - ac_script="$ac_script$as_nl$ac_script" - done - echo "$ac_script" 2>/dev/null | sed 99q >conftest.sed - { ac_script=; unset ac_script;} - if test -z "$SED"; then - ac_path_SED_found=false - # Loop through the user's path and test for each of PROGNAME-LIST - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_prog in sed gsed; do - for ac_exec_ext in '' $ac_executable_extensions; do - ac_path_SED="$as_dir/$ac_prog$ac_exec_ext" - { test -f "$ac_path_SED" && $as_test_x "$ac_path_SED"; } || continue -# Check for GNU ac_path_SED and select it if it is found. - # Check for GNU $ac_path_SED -case `"$ac_path_SED" --version 2>&1` in -*GNU*) - ac_cv_path_SED="$ac_path_SED" ac_path_SED_found=:;; -*) - ac_count=0 - $as_echo_n 0123456789 >"conftest.in" - while : - do - cat "conftest.in" "conftest.in" >"conftest.tmp" - mv "conftest.tmp" "conftest.in" - cp "conftest.in" "conftest.nl" - $as_echo '' >> "conftest.nl" - "$ac_path_SED" -f conftest.sed < "conftest.nl" >"conftest.out" 2>/dev/null || break - diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break - as_fn_arith $ac_count + 1 && ac_count=$as_val - if test $ac_count -gt ${ac_path_SED_max-0}; then - # Best one so far, save it but keep looking for a better one - ac_cv_path_SED="$ac_path_SED" - ac_path_SED_max=$ac_count - fi - # 10*(2^10) chars as input seems more than enough - test $ac_count -gt 10 && break - done - rm -f conftest.in conftest.tmp conftest.nl conftest.out;; -esac - - $ac_path_SED_found && break 3 - done - done - done -IFS=$as_save_IFS - if test -z "$ac_cv_path_SED"; then - as_fn_error $? "no acceptable sed could be found in \$PATH" "$LINENO" 5 - fi -else - ac_cv_path_SED=$SED -fi - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_SED" >&5 -$as_echo "$ac_cv_path_SED" >&6; } - SED="$ac_cv_path_SED" - rm -f conftest.sed - -test -z "$SED" && SED=sed -Xsed="$SED -e 1s/^X//" - - - - - - - - - - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for grep that handles long lines and -e" >&5 -$as_echo_n "checking for grep that handles long lines and -e... " >&6; } -if ${ac_cv_path_GREP+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -z "$GREP"; then - ac_path_GREP_found=false - # Loop through the user's path and test for each of PROGNAME-LIST - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_prog in grep ggrep; do - for ac_exec_ext in '' $ac_executable_extensions; do - ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext" - { test -f "$ac_path_GREP" && $as_test_x "$ac_path_GREP"; } || continue -# Check for GNU ac_path_GREP and select it if it is found. - # Check for GNU $ac_path_GREP -case `"$ac_path_GREP" --version 2>&1` in -*GNU*) - ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;; -*) - ac_count=0 - $as_echo_n 0123456789 >"conftest.in" - while : - do - cat "conftest.in" "conftest.in" >"conftest.tmp" - mv "conftest.tmp" "conftest.in" - cp "conftest.in" "conftest.nl" - $as_echo 'GREP' >> "conftest.nl" - "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break - diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break - as_fn_arith $ac_count + 1 && ac_count=$as_val - if test $ac_count -gt ${ac_path_GREP_max-0}; then - # Best one so far, save it but keep looking for a better one - ac_cv_path_GREP="$ac_path_GREP" - ac_path_GREP_max=$ac_count - fi - # 10*(2^10) chars as input seems more than enough - test $ac_count -gt 10 && break - done - rm -f conftest.in conftest.tmp conftest.nl conftest.out;; -esac - - $ac_path_GREP_found && break 3 - done - done - done -IFS=$as_save_IFS - if test -z "$ac_cv_path_GREP"; then - as_fn_error $? "no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5 - fi -else - ac_cv_path_GREP=$GREP -fi - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_GREP" >&5 -$as_echo "$ac_cv_path_GREP" >&6; } - GREP="$ac_cv_path_GREP" - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for egrep" >&5 -$as_echo_n "checking for egrep... " >&6; } -if ${ac_cv_path_EGREP+:} false; then : - $as_echo_n "(cached) " >&6 -else - if echo a | $GREP -E '(a|b)' >/dev/null 2>&1 - then ac_cv_path_EGREP="$GREP -E" - else - if test -z "$EGREP"; then - ac_path_EGREP_found=false - # Loop through the user's path and test for each of PROGNAME-LIST - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_prog in egrep; do - for ac_exec_ext in '' $ac_executable_extensions; do - ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext" - { test -f "$ac_path_EGREP" && $as_test_x "$ac_path_EGREP"; } || continue -# Check for GNU ac_path_EGREP and select it if it is found. - # Check for GNU $ac_path_EGREP -case `"$ac_path_EGREP" --version 2>&1` in -*GNU*) - ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;; -*) - ac_count=0 - $as_echo_n 0123456789 >"conftest.in" - while : - do - cat "conftest.in" "conftest.in" >"conftest.tmp" - mv "conftest.tmp" "conftest.in" - cp "conftest.in" "conftest.nl" - $as_echo 'EGREP' >> "conftest.nl" - "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break - diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break - as_fn_arith $ac_count + 1 && ac_count=$as_val - if test $ac_count -gt ${ac_path_EGREP_max-0}; then - # Best one so far, save it but keep looking for a better one - ac_cv_path_EGREP="$ac_path_EGREP" - ac_path_EGREP_max=$ac_count - fi - # 10*(2^10) chars as input seems more than enough - test $ac_count -gt 10 && break - done - rm -f conftest.in conftest.tmp conftest.nl conftest.out;; -esac - - $ac_path_EGREP_found && break 3 - done - done - done -IFS=$as_save_IFS - if test -z "$ac_cv_path_EGREP"; then - as_fn_error $? "no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5 - fi -else - ac_cv_path_EGREP=$EGREP -fi - - fi -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_EGREP" >&5 -$as_echo "$ac_cv_path_EGREP" >&6; } - EGREP="$ac_cv_path_EGREP" - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for fgrep" >&5 -$as_echo_n "checking for fgrep... " >&6; } -if ${ac_cv_path_FGREP+:} false; then : - $as_echo_n "(cached) " >&6 -else - if echo 'ab*c' | $GREP -F 'ab*c' >/dev/null 2>&1 - then ac_cv_path_FGREP="$GREP -F" - else - if test -z "$FGREP"; then - ac_path_FGREP_found=false - # Loop through the user's path and test for each of PROGNAME-LIST - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_prog in fgrep; do - for ac_exec_ext in '' $ac_executable_extensions; do - ac_path_FGREP="$as_dir/$ac_prog$ac_exec_ext" - { test -f "$ac_path_FGREP" && $as_test_x "$ac_path_FGREP"; } || continue -# Check for GNU ac_path_FGREP and select it if it is found. - # Check for GNU $ac_path_FGREP -case `"$ac_path_FGREP" --version 2>&1` in -*GNU*) - ac_cv_path_FGREP="$ac_path_FGREP" ac_path_FGREP_found=:;; -*) - ac_count=0 - $as_echo_n 0123456789 >"conftest.in" - while : - do - cat "conftest.in" "conftest.in" >"conftest.tmp" - mv "conftest.tmp" "conftest.in" - cp "conftest.in" "conftest.nl" - $as_echo 'FGREP' >> "conftest.nl" - "$ac_path_FGREP" FGREP < "conftest.nl" >"conftest.out" 2>/dev/null || break - diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break - as_fn_arith $ac_count + 1 && ac_count=$as_val - if test $ac_count -gt ${ac_path_FGREP_max-0}; then - # Best one so far, save it but keep looking for a better one - ac_cv_path_FGREP="$ac_path_FGREP" - ac_path_FGREP_max=$ac_count - fi - # 10*(2^10) chars as input seems more than enough - test $ac_count -gt 10 && break - done - rm -f conftest.in conftest.tmp conftest.nl conftest.out;; -esac - - $ac_path_FGREP_found && break 3 - done - done - done -IFS=$as_save_IFS - if test -z "$ac_cv_path_FGREP"; then - as_fn_error $? "no acceptable fgrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5 - fi -else - ac_cv_path_FGREP=$FGREP -fi - - fi -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_FGREP" >&5 -$as_echo "$ac_cv_path_FGREP" >&6; } - FGREP="$ac_cv_path_FGREP" - - -test -z "$GREP" && GREP=grep - - - - - - - - - - - - - - - - - - - -@%:@ Check whether --with-gnu-ld was given. -if test "${with_gnu_ld+set}" = set; then : - withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes -else - with_gnu_ld=no -fi - -ac_prog=ld -if test "$GCC" = yes; then - # Check if gcc -print-prog-name=ld gives a path. - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ld used by $CC" >&5 -$as_echo_n "checking for ld used by $CC... " >&6; } - case $host in - *-*-mingw*) - # gcc leaves a trailing carriage return which upsets mingw - ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; - *) - ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; - esac - case $ac_prog in - # Accept absolute paths. - [\\/]* | ?:[\\/]*) - re_direlt='/[^/][^/]*/\.\./' - # Canonicalize the pathname of ld - ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'` - while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do - ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"` - done - test -z "$LD" && LD="$ac_prog" - ;; - "") - # If it fails, then pretend we aren't using GCC. - ac_prog=ld - ;; - *) - # If it is relative, then search for the first ld in PATH. - with_gnu_ld=unknown - ;; - esac -elif test "$with_gnu_ld" = yes; then - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU ld" >&5 -$as_echo_n "checking for GNU ld... " >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for non-GNU ld" >&5 -$as_echo_n "checking for non-GNU ld... " >&6; } -fi -if ${lt_cv_path_LD+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -z "$LD"; then - lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR - for ac_dir in $PATH; do - IFS="$lt_save_ifs" - test -z "$ac_dir" && ac_dir=. - if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then - lt_cv_path_LD="$ac_dir/$ac_prog" - # Check to see if the program is GNU ld. I'd rather use --version, - # but apparently some variants of GNU ld only accept -v. - # Break only if it was the GNU/non-GNU ld that we prefer. - case `"$lt_cv_path_LD" -v 2>&1 &5 -$as_echo "$LD" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi -test -z "$LD" && as_fn_error $? "no acceptable ld found in \$PATH" "$LINENO" 5 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if the linker ($LD) is GNU ld" >&5 -$as_echo_n "checking if the linker ($LD) is GNU ld... " >&6; } -if ${lt_cv_prog_gnu_ld+:} false; then : - $as_echo_n "(cached) " >&6 -else - # I'd rather use --version here, but apparently some GNU lds only accept -v. -case `$LD -v 2>&1 &5 -$as_echo "$lt_cv_prog_gnu_ld" >&6; } -with_gnu_ld=$lt_cv_prog_gnu_ld - - - - - - - - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for BSD- or MS-compatible name lister (nm)" >&5 -$as_echo_n "checking for BSD- or MS-compatible name lister (nm)... " >&6; } -if ${lt_cv_path_NM+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$NM"; then - # Let the user override the test. - lt_cv_path_NM="$NM" -else - lt_nm_to_check="${ac_tool_prefix}nm" - if test -n "$ac_tool_prefix" && test "$build" = "$host"; then - lt_nm_to_check="$lt_nm_to_check nm" - fi - for lt_tmp_nm in $lt_nm_to_check; do - lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR - for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do - IFS="$lt_save_ifs" - test -z "$ac_dir" && ac_dir=. - tmp_nm="$ac_dir/$lt_tmp_nm" - if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then - # Check to see if the nm accepts a BSD-compat flag. - # Adding the `sed 1q' prevents false positives on HP-UX, which says: - # nm: unknown option "B" ignored - # Tru64's nm complains that /dev/null is an invalid object file - case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in - */dev/null* | *'Invalid file or object type'*) - lt_cv_path_NM="$tmp_nm -B" - break - ;; - *) - case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in - */dev/null*) - lt_cv_path_NM="$tmp_nm -p" - break - ;; - *) - lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but - continue # so that we can try to find one that supports BSD flags - ;; - esac - ;; - esac - fi - done - IFS="$lt_save_ifs" - done - : ${lt_cv_path_NM=no} -fi -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_NM" >&5 -$as_echo "$lt_cv_path_NM" >&6; } -if test "$lt_cv_path_NM" != "no"; then - NM="$lt_cv_path_NM" -else - # Didn't find any BSD compatible name lister, look for dumpbin. - if test -n "$DUMPBIN"; then : - # Let the user override the test. - else - if test -n "$ac_tool_prefix"; then - for ac_prog in dumpbin "link -dump" - do - # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. -set dummy $ac_tool_prefix$ac_prog; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_DUMPBIN+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$DUMPBIN"; then - ac_cv_prog_DUMPBIN="$DUMPBIN" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_DUMPBIN="$ac_tool_prefix$ac_prog" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -DUMPBIN=$ac_cv_prog_DUMPBIN -if test -n "$DUMPBIN"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DUMPBIN" >&5 -$as_echo "$DUMPBIN" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - test -n "$DUMPBIN" && break - done -fi -if test -z "$DUMPBIN"; then - ac_ct_DUMPBIN=$DUMPBIN - for ac_prog in dumpbin "link -dump" -do - # Extract the first word of "$ac_prog", so it can be a program name with args. -set dummy $ac_prog; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_DUMPBIN+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_DUMPBIN"; then - ac_cv_prog_ac_ct_DUMPBIN="$ac_ct_DUMPBIN" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_DUMPBIN="$ac_prog" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_DUMPBIN=$ac_cv_prog_ac_ct_DUMPBIN -if test -n "$ac_ct_DUMPBIN"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DUMPBIN" >&5 -$as_echo "$ac_ct_DUMPBIN" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - test -n "$ac_ct_DUMPBIN" && break -done - - if test "x$ac_ct_DUMPBIN" = x; then - DUMPBIN=":" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - DUMPBIN=$ac_ct_DUMPBIN - fi -fi - - case `$DUMPBIN -symbols /dev/null 2>&1 | sed '1q'` in - *COFF*) - DUMPBIN="$DUMPBIN -symbols" - ;; - *) - DUMPBIN=: - ;; - esac - fi - - if test "$DUMPBIN" != ":"; then - NM="$DUMPBIN" - fi -fi -test -z "$NM" && NM=nm - - - - - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking the name lister ($NM) interface" >&5 -$as_echo_n "checking the name lister ($NM) interface... " >&6; } -if ${lt_cv_nm_interface+:} false; then : - $as_echo_n "(cached) " >&6 -else - lt_cv_nm_interface="BSD nm" - echo "int some_variable = 0;" > conftest.$ac_ext - (eval echo "\"\$as_me:$LINENO: $ac_compile\"" >&5) - (eval "$ac_compile" 2>conftest.err) - cat conftest.err >&5 - (eval echo "\"\$as_me:$LINENO: $NM \\\"conftest.$ac_objext\\\"\"" >&5) - (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out) - cat conftest.err >&5 - (eval echo "\"\$as_me:$LINENO: output\"" >&5) - cat conftest.out >&5 - if $GREP 'External.*some_variable' conftest.out > /dev/null; then - lt_cv_nm_interface="MS dumpbin" - fi - rm -f conftest* -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_nm_interface" >&5 -$as_echo "$lt_cv_nm_interface" >&6; } - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ln -s works" >&5 -$as_echo_n "checking whether ln -s works... " >&6; } -LN_S=$as_ln_s -if test "$LN_S" = "ln -s"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -$as_echo "yes" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no, using $LN_S" >&5 -$as_echo "no, using $LN_S" >&6; } -fi - -# find the maximum length of command line arguments -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking the maximum length of command line arguments" >&5 -$as_echo_n "checking the maximum length of command line arguments... " >&6; } -if ${lt_cv_sys_max_cmd_len+:} false; then : - $as_echo_n "(cached) " >&6 -else - i=0 - teststring="ABCD" - - case $build_os in - msdosdjgpp*) - # On DJGPP, this test can blow up pretty badly due to problems in libc - # (any single argument exceeding 2000 bytes causes a buffer overrun - # during glob expansion). Even if it were fixed, the result of this - # check would be larger than it should be. - lt_cv_sys_max_cmd_len=12288; # 12K is about right - ;; - - gnu*) - # Under GNU Hurd, this test is not required because there is - # no limit to the length of command line arguments. - # Libtool will interpret -1 as no limit whatsoever - lt_cv_sys_max_cmd_len=-1; - ;; - - cygwin* | mingw* | cegcc*) - # On Win9x/ME, this test blows up -- it succeeds, but takes - # about 5 minutes as the teststring grows exponentially. - # Worse, since 9x/ME are not pre-emptively multitasking, - # you end up with a "frozen" computer, even though with patience - # the test eventually succeeds (with a max line length of 256k). - # Instead, let's just punt: use the minimum linelength reported by - # all of the supported platforms: 8192 (on NT/2K/XP). - lt_cv_sys_max_cmd_len=8192; - ;; - - mint*) - # On MiNT this can take a long time and run out of memory. - lt_cv_sys_max_cmd_len=8192; - ;; - - amigaos*) - # On AmigaOS with pdksh, this test takes hours, literally. - # So we just punt and use a minimum line length of 8192. - lt_cv_sys_max_cmd_len=8192; - ;; - - netbsd* | freebsd* | openbsd* | darwin* | dragonfly*) - # This has been around since 386BSD, at least. Likely further. - if test -x /sbin/sysctl; then - lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax` - elif test -x /usr/sbin/sysctl; then - lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax` - else - lt_cv_sys_max_cmd_len=65536 # usable default for all BSDs - fi - # And add a safety zone - lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` - lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` - ;; - - interix*) - # We know the value 262144 and hardcode it with a safety zone (like BSD) - lt_cv_sys_max_cmd_len=196608 - ;; - - osf*) - # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure - # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not - # nice to cause kernel panics so lets avoid the loop below. - # First set a reasonable default. - lt_cv_sys_max_cmd_len=16384 - # - if test -x /sbin/sysconfig; then - case `/sbin/sysconfig -q proc exec_disable_arg_limit` in - *1*) lt_cv_sys_max_cmd_len=-1 ;; - esac - fi - ;; - sco3.2v5*) - lt_cv_sys_max_cmd_len=102400 - ;; - sysv5* | sco5v6* | sysv4.2uw2*) - kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null` - if test -n "$kargmax"; then - lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[ ]//'` - else - lt_cv_sys_max_cmd_len=32768 - fi - ;; - *) - lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null` - if test -n "$lt_cv_sys_max_cmd_len"; then - lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` - lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` - else - # Make teststring a little bigger before we do anything with it. - # a 1K string should be a reasonable start. - for i in 1 2 3 4 5 6 7 8 ; do - teststring=$teststring$teststring - done - SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}} - # If test is not a shell built-in, we'll probably end up computing a - # maximum length that is only half of the actual maximum length, but - # we can't tell. - while { test "X"`func_fallback_echo "$teststring$teststring" 2>/dev/null` \ - = "X$teststring$teststring"; } >/dev/null 2>&1 && - test $i != 17 # 1/2 MB should be enough - do - i=`expr $i + 1` - teststring=$teststring$teststring - done - # Only check the string length outside the loop. - lt_cv_sys_max_cmd_len=`expr "X$teststring" : ".*" 2>&1` - teststring= - # Add a significant safety factor because C++ compilers can tack on - # massive amounts of additional arguments before passing them to the - # linker. It appears as though 1/2 is a usable value. - lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2` - fi - ;; - esac - -fi - -if test -n $lt_cv_sys_max_cmd_len ; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_sys_max_cmd_len" >&5 -$as_echo "$lt_cv_sys_max_cmd_len" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: none" >&5 -$as_echo "none" >&6; } -fi -max_cmd_len=$lt_cv_sys_max_cmd_len - - - - - - -: ${CP="cp -f"} -: ${MV="mv -f"} -: ${RM="rm -f"} - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the shell understands some XSI constructs" >&5 -$as_echo_n "checking whether the shell understands some XSI constructs... " >&6; } -# Try some XSI features -xsi_shell=no -( _lt_dummy="a/b/c" - test "${_lt_dummy##*/},${_lt_dummy%/*},${_lt_dummy#??}"${_lt_dummy%"$_lt_dummy"}, \ - = c,a/b,b/c, \ - && eval 'test $(( 1 + 1 )) -eq 2 \ - && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \ - && xsi_shell=yes -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $xsi_shell" >&5 -$as_echo "$xsi_shell" >&6; } - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the shell understands \"+=\"" >&5 -$as_echo_n "checking whether the shell understands \"+=\"... " >&6; } -lt_shell_append=no -( foo=bar; set foo baz; eval "$1+=\$2" && test "$foo" = barbaz ) \ - >/dev/null 2>&1 \ - && lt_shell_append=yes -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_shell_append" >&5 -$as_echo "$lt_shell_append" >&6; } - - -if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then - lt_unset=unset -else - lt_unset=false -fi - - - - - -# test EBCDIC or ASCII -case `echo X|tr X '\101'` in - A) # ASCII based system - # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr - lt_SP2NL='tr \040 \012' - lt_NL2SP='tr \015\012 \040\040' - ;; - *) # EBCDIC based system - lt_SP2NL='tr \100 \n' - lt_NL2SP='tr \r\n \100\100' - ;; -esac - - - - - - - - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to convert $build file names to $host format" >&5 -$as_echo_n "checking how to convert $build file names to $host format... " >&6; } -if ${lt_cv_to_host_file_cmd+:} false; then : - $as_echo_n "(cached) " >&6 -else - case $host in - *-*-mingw* ) - case $build in - *-*-mingw* ) # actually msys - lt_cv_to_host_file_cmd=func_convert_file_msys_to_w32 - ;; - *-*-cygwin* ) - lt_cv_to_host_file_cmd=func_convert_file_cygwin_to_w32 - ;; - * ) # otherwise, assume *nix - lt_cv_to_host_file_cmd=func_convert_file_nix_to_w32 - ;; - esac - ;; - *-*-cygwin* ) - case $build in - *-*-mingw* ) # actually msys - lt_cv_to_host_file_cmd=func_convert_file_msys_to_cygwin - ;; - *-*-cygwin* ) - lt_cv_to_host_file_cmd=func_convert_file_noop - ;; - * ) # otherwise, assume *nix - lt_cv_to_host_file_cmd=func_convert_file_nix_to_cygwin - ;; - esac - ;; - * ) # unhandled hosts (and "normal" native builds) - lt_cv_to_host_file_cmd=func_convert_file_noop - ;; -esac - -fi - -to_host_file_cmd=$lt_cv_to_host_file_cmd -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_to_host_file_cmd" >&5 -$as_echo "$lt_cv_to_host_file_cmd" >&6; } - - - - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to convert $build file names to toolchain format" >&5 -$as_echo_n "checking how to convert $build file names to toolchain format... " >&6; } -if ${lt_cv_to_tool_file_cmd+:} false; then : - $as_echo_n "(cached) " >&6 -else - #assume ordinary cross tools, or native build. -lt_cv_to_tool_file_cmd=func_convert_file_noop -case $host in - *-*-mingw* ) - case $build in - *-*-mingw* ) # actually msys - lt_cv_to_tool_file_cmd=func_convert_file_msys_to_w32 - ;; - esac - ;; -esac - -fi - -to_tool_file_cmd=$lt_cv_to_tool_file_cmd -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_to_tool_file_cmd" >&5 -$as_echo "$lt_cv_to_tool_file_cmd" >&6; } - - - - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $LD option to reload object files" >&5 -$as_echo_n "checking for $LD option to reload object files... " >&6; } -if ${lt_cv_ld_reload_flag+:} false; then : - $as_echo_n "(cached) " >&6 -else - lt_cv_ld_reload_flag='-r' -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_reload_flag" >&5 -$as_echo "$lt_cv_ld_reload_flag" >&6; } -reload_flag=$lt_cv_ld_reload_flag -case $reload_flag in -"" | " "*) ;; -*) reload_flag=" $reload_flag" ;; -esac -reload_cmds='$LD$reload_flag -o $output$reload_objs' -case $host_os in - cygwin* | mingw* | pw32* | cegcc*) - if test "$GCC" != yes; then - reload_cmds=false - fi - ;; - darwin*) - if test "$GCC" = yes; then - reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs' - else - reload_cmds='$LD$reload_flag -o $output$reload_objs' - fi - ;; -esac - - - - - - - - - -if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}objdump", so it can be a program name with args. -set dummy ${ac_tool_prefix}objdump; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_OBJDUMP+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$OBJDUMP"; then - ac_cv_prog_OBJDUMP="$OBJDUMP" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_OBJDUMP="${ac_tool_prefix}objdump" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -OBJDUMP=$ac_cv_prog_OBJDUMP -if test -n "$OBJDUMP"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OBJDUMP" >&5 -$as_echo "$OBJDUMP" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -fi -if test -z "$ac_cv_prog_OBJDUMP"; then - ac_ct_OBJDUMP=$OBJDUMP - # Extract the first word of "objdump", so it can be a program name with args. -set dummy objdump; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_OBJDUMP+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_OBJDUMP"; then - ac_cv_prog_ac_ct_OBJDUMP="$ac_ct_OBJDUMP" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_OBJDUMP="objdump" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_OBJDUMP=$ac_cv_prog_ac_ct_OBJDUMP -if test -n "$ac_ct_OBJDUMP"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OBJDUMP" >&5 -$as_echo "$ac_ct_OBJDUMP" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - if test "x$ac_ct_OBJDUMP" = x; then - OBJDUMP="false" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - OBJDUMP=$ac_ct_OBJDUMP - fi -else - OBJDUMP="$ac_cv_prog_OBJDUMP" -fi - -test -z "$OBJDUMP" && OBJDUMP=objdump - - - - - - - - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to recognize dependent libraries" >&5 -$as_echo_n "checking how to recognize dependent libraries... " >&6; } -if ${lt_cv_deplibs_check_method+:} false; then : - $as_echo_n "(cached) " >&6 -else - lt_cv_file_magic_cmd='$MAGIC_CMD' -lt_cv_file_magic_test_file= -lt_cv_deplibs_check_method='unknown' -# Need to set the preceding variable on all platforms that support -# interlibrary dependencies. -# 'none' -- dependencies not supported. -# `unknown' -- same as none, but documents that we really don't know. -# 'pass_all' -- all dependencies passed with no checks. -# 'test_compile' -- check by making test program. -# 'file_magic [[regex]]' -- check by looking for files in library path -# which responds to the $file_magic_cmd with a given extended regex. -# If you have `file' or equivalent on your system and you're not sure -# whether `pass_all' will *always* work, you probably want this one. - -case $host_os in -aix[4-9]*) - lt_cv_deplibs_check_method=pass_all - ;; - -beos*) - lt_cv_deplibs_check_method=pass_all - ;; - -bsdi[45]*) - lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)' - lt_cv_file_magic_cmd='/usr/bin/file -L' - lt_cv_file_magic_test_file=/shlib/libc.so - ;; - -cygwin*) - # func_win32_libid is a shell function defined in ltmain.sh - lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' - lt_cv_file_magic_cmd='func_win32_libid' - ;; - -mingw* | pw32*) - # Base MSYS/MinGW do not provide the 'file' command needed by - # func_win32_libid shell function, so use a weaker test based on 'objdump', - # unless we find 'file', for example because we are cross-compiling. - # func_win32_libid assumes BSD nm, so disallow it if using MS dumpbin. - if ( test "$lt_cv_nm_interface" = "BSD nm" && file / ) >/dev/null 2>&1; then - lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' - lt_cv_file_magic_cmd='func_win32_libid' - else - # Keep this pattern in sync with the one in func_win32_libid. - lt_cv_deplibs_check_method='file_magic file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)' - lt_cv_file_magic_cmd='$OBJDUMP -f' - fi - ;; - -cegcc*) - # use the weaker test based on 'objdump'. See mingw*. - lt_cv_deplibs_check_method='file_magic file format pe-arm-.*little(.*architecture: arm)?' - lt_cv_file_magic_cmd='$OBJDUMP -f' - ;; - -darwin* | rhapsody*) - lt_cv_deplibs_check_method=pass_all - ;; - -freebsd* | dragonfly*) - if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then - case $host_cpu in - i*86 ) - # Not sure whether the presence of OpenBSD here was a mistake. - # Let's accept both of them until this is cleared up. - lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[3-9]86 (compact )?demand paged shared library' - lt_cv_file_magic_cmd=/usr/bin/file - lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` - ;; - esac - else - lt_cv_deplibs_check_method=pass_all - fi - ;; - -gnu*) - lt_cv_deplibs_check_method=pass_all - ;; - -haiku*) - lt_cv_deplibs_check_method=pass_all - ;; - -hpux10.20* | hpux11*) - lt_cv_file_magic_cmd=/usr/bin/file - case $host_cpu in - ia64*) - lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - IA64' - lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so - ;; - hppa*64*) - lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF[ -][0-9][0-9])(-bit)?( [LM]SB)? shared object( file)?[, -]* PA-RISC [0-9]\.[0-9]' - lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl - ;; - *) - lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9]\.[0-9]) shared library' - lt_cv_file_magic_test_file=/usr/lib/libc.sl - ;; - esac - ;; - -interix[3-9]*) - # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here - lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|\.a)$' - ;; - -irix5* | irix6* | nonstopux*) - case $LD in - *-32|*"-32 ") libmagic=32-bit;; - *-n32|*"-n32 ") libmagic=N32;; - *-64|*"-64 ") libmagic=64-bit;; - *) libmagic=never-match;; - esac - lt_cv_deplibs_check_method=pass_all - ;; - -# This must be Linux ELF. -linux* | k*bsd*-gnu | kopensolaris*-gnu) - lt_cv_deplibs_check_method=pass_all - ;; - -netbsd* | netbsdelf*-gnu) - if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then - lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$' - else - lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|_pic\.a)$' - fi - ;; - -newos6*) - lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)' - lt_cv_file_magic_cmd=/usr/bin/file - lt_cv_file_magic_test_file=/usr/lib/libnls.so - ;; - -*nto* | *qnx*) - lt_cv_deplibs_check_method=pass_all - ;; - -openbsd*) - if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then - lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|\.so|_pic\.a)$' - else - lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$' - fi - ;; - -osf3* | osf4* | osf5*) - lt_cv_deplibs_check_method=pass_all - ;; - -rdos*) - lt_cv_deplibs_check_method=pass_all - ;; - -solaris*) - lt_cv_deplibs_check_method=pass_all - ;; - -sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) - lt_cv_deplibs_check_method=pass_all - ;; - -sysv4 | sysv4.3*) - case $host_vendor in - motorola) - lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]' - lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*` - ;; - ncr) - lt_cv_deplibs_check_method=pass_all - ;; - sequent) - lt_cv_file_magic_cmd='/bin/file' - lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )' - ;; - sni) - lt_cv_file_magic_cmd='/bin/file' - lt_cv_deplibs_check_method="file_magic ELF [0-9][0-9]*-bit [LM]SB dynamic lib" - lt_cv_file_magic_test_file=/lib/libc.so - ;; - siemens) - lt_cv_deplibs_check_method=pass_all - ;; - pc) - lt_cv_deplibs_check_method=pass_all - ;; - esac - ;; - -tpf*) - lt_cv_deplibs_check_method=pass_all - ;; -esac - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_deplibs_check_method" >&5 -$as_echo "$lt_cv_deplibs_check_method" >&6; } - -file_magic_glob= -want_nocaseglob=no -if test "$build" = "$host"; then - case $host_os in - mingw* | pw32*) - if ( shopt | grep nocaseglob ) >/dev/null 2>&1; then - want_nocaseglob=yes - else - file_magic_glob=`echo aAbBcCdDeEfFgGhHiIjJkKlLmMnNoOpPqQrRsStTuUvVwWxXyYzZ | $SED -e "s/\(..\)/s\/[\1]\/[\1]\/g;/g"` - fi - ;; - esac -fi - -file_magic_cmd=$lt_cv_file_magic_cmd -deplibs_check_method=$lt_cv_deplibs_check_method -test -z "$deplibs_check_method" && deplibs_check_method=unknown - - - - - - - - - - - - - - - - - - - - - - -if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}dlltool", so it can be a program name with args. -set dummy ${ac_tool_prefix}dlltool; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_DLLTOOL+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$DLLTOOL"; then - ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_DLLTOOL="${ac_tool_prefix}dlltool" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -DLLTOOL=$ac_cv_prog_DLLTOOL -if test -n "$DLLTOOL"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DLLTOOL" >&5 -$as_echo "$DLLTOOL" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -fi -if test -z "$ac_cv_prog_DLLTOOL"; then - ac_ct_DLLTOOL=$DLLTOOL - # Extract the first word of "dlltool", so it can be a program name with args. -set dummy dlltool; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_DLLTOOL+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_DLLTOOL"; then - ac_cv_prog_ac_ct_DLLTOOL="$ac_ct_DLLTOOL" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_DLLTOOL="dlltool" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_DLLTOOL=$ac_cv_prog_ac_ct_DLLTOOL -if test -n "$ac_ct_DLLTOOL"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DLLTOOL" >&5 -$as_echo "$ac_ct_DLLTOOL" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - if test "x$ac_ct_DLLTOOL" = x; then - DLLTOOL="false" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - DLLTOOL=$ac_ct_DLLTOOL - fi -else - DLLTOOL="$ac_cv_prog_DLLTOOL" -fi - -test -z "$DLLTOOL" && DLLTOOL=dlltool - - - - - - - - - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to associate runtime and link libraries" >&5 -$as_echo_n "checking how to associate runtime and link libraries... " >&6; } -if ${lt_cv_sharedlib_from_linklib_cmd+:} false; then : - $as_echo_n "(cached) " >&6 -else - lt_cv_sharedlib_from_linklib_cmd='unknown' - -case $host_os in -cygwin* | mingw* | pw32* | cegcc*) - # two different shell functions defined in ltmain.sh - # decide which to use based on capabilities of $DLLTOOL - case `$DLLTOOL --help 2>&1` in - *--identify-strict*) - lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib - ;; - *) - lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib_fallback - ;; - esac - ;; -*) - # fallback: assume linklib IS sharedlib - lt_cv_sharedlib_from_linklib_cmd="$ECHO" - ;; -esac - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_sharedlib_from_linklib_cmd" >&5 -$as_echo "$lt_cv_sharedlib_from_linklib_cmd" >&6; } -sharedlib_from_linklib_cmd=$lt_cv_sharedlib_from_linklib_cmd -test -z "$sharedlib_from_linklib_cmd" && sharedlib_from_linklib_cmd=$ECHO - - - - - - - - -if test -n "$ac_tool_prefix"; then - for ac_prog in ar - do - # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. -set dummy $ac_tool_prefix$ac_prog; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_AR+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$AR"; then - ac_cv_prog_AR="$AR" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_AR="$ac_tool_prefix$ac_prog" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -AR=$ac_cv_prog_AR -if test -n "$AR"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AR" >&5 -$as_echo "$AR" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - test -n "$AR" && break - done -fi -if test -z "$AR"; then - ac_ct_AR=$AR - for ac_prog in ar -do - # Extract the first word of "$ac_prog", so it can be a program name with args. -set dummy $ac_prog; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_AR+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_AR"; then - ac_cv_prog_ac_ct_AR="$ac_ct_AR" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_AR="$ac_prog" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_AR=$ac_cv_prog_ac_ct_AR -if test -n "$ac_ct_AR"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_AR" >&5 -$as_echo "$ac_ct_AR" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - test -n "$ac_ct_AR" && break -done - - if test "x$ac_ct_AR" = x; then - AR="false" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - AR=$ac_ct_AR - fi -fi - -: ${AR=ar} -: ${AR_FLAGS=cru} - - - - - - - - - - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for archiver @FILE support" >&5 -$as_echo_n "checking for archiver @FILE support... " >&6; } -if ${lt_cv_ar_at_file+:} false; then : - $as_echo_n "(cached) " >&6 -else - lt_cv_ar_at_file=no - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - echo conftest.$ac_objext > conftest.lst - lt_ar_try='$AR $AR_FLAGS libconftest.a @conftest.lst >&5' - { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$lt_ar_try\""; } >&5 - (eval $lt_ar_try) 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } - if test "$ac_status" -eq 0; then - # Ensure the archiver fails upon bogus file names. - rm -f conftest.$ac_objext libconftest.a - { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$lt_ar_try\""; } >&5 - (eval $lt_ar_try) 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } - if test "$ac_status" -ne 0; then - lt_cv_ar_at_file=@ - fi - fi - rm -f conftest.* libconftest.a - -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ar_at_file" >&5 -$as_echo "$lt_cv_ar_at_file" >&6; } - -if test "x$lt_cv_ar_at_file" = xno; then - archiver_list_spec= -else - archiver_list_spec=$lt_cv_ar_at_file -fi - - - - - - - -if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. -set dummy ${ac_tool_prefix}strip; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_STRIP+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$STRIP"; then - ac_cv_prog_STRIP="$STRIP" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_STRIP="${ac_tool_prefix}strip" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -STRIP=$ac_cv_prog_STRIP -if test -n "$STRIP"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5 -$as_echo "$STRIP" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -fi -if test -z "$ac_cv_prog_STRIP"; then - ac_ct_STRIP=$STRIP - # Extract the first word of "strip", so it can be a program name with args. -set dummy strip; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_STRIP+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_STRIP"; then - ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_STRIP="strip" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP -if test -n "$ac_ct_STRIP"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5 -$as_echo "$ac_ct_STRIP" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - if test "x$ac_ct_STRIP" = x; then - STRIP=":" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - STRIP=$ac_ct_STRIP - fi -else - STRIP="$ac_cv_prog_STRIP" -fi - -test -z "$STRIP" && STRIP=: - - - - - - -if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args. -set dummy ${ac_tool_prefix}ranlib; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_RANLIB+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$RANLIB"; then - ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -RANLIB=$ac_cv_prog_RANLIB -if test -n "$RANLIB"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $RANLIB" >&5 -$as_echo "$RANLIB" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -fi -if test -z "$ac_cv_prog_RANLIB"; then - ac_ct_RANLIB=$RANLIB - # Extract the first word of "ranlib", so it can be a program name with args. -set dummy ranlib; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_RANLIB+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_RANLIB"; then - ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_RANLIB="ranlib" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB -if test -n "$ac_ct_RANLIB"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_RANLIB" >&5 -$as_echo "$ac_ct_RANLIB" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - if test "x$ac_ct_RANLIB" = x; then - RANLIB=":" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - RANLIB=$ac_ct_RANLIB - fi -else - RANLIB="$ac_cv_prog_RANLIB" -fi - -test -z "$RANLIB" && RANLIB=: - - - - - - -# Determine commands to create old-style static archives. -old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs' -old_postinstall_cmds='chmod 644 $oldlib' -old_postuninstall_cmds= - -if test -n "$RANLIB"; then - case $host_os in - openbsd*) - old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$oldlib" - ;; - *) - old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$oldlib" - ;; - esac - old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib" -fi - -case $host_os in - darwin*) - lock_old_archive_extraction=yes ;; - *) - lock_old_archive_extraction=no ;; -esac - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -# If no C compiler was specified, use CC. -LTCC=${LTCC-"$CC"} - -# If no C compiler flags were specified, use CFLAGS. -LTCFLAGS=${LTCFLAGS-"$CFLAGS"} - -# Allow CC to be a program name with arguments. -compiler=$CC - - -# Check for command to grab the raw symbol name followed by C symbol from nm. -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking command to parse $NM output from $compiler object" >&5 -$as_echo_n "checking command to parse $NM output from $compiler object... " >&6; } -if ${lt_cv_sys_global_symbol_pipe+:} false; then : - $as_echo_n "(cached) " >&6 -else - -# These are sane defaults that work on at least a few old systems. -# [They come from Ultrix. What could be older than Ultrix?!! ;)] - -# Character class describing NM global symbol codes. -symcode='[BCDEGRST]' - -# Regexp to match symbols that can be accessed directly from C. -sympat='\([_A-Za-z][_A-Za-z0-9]*\)' - -# Define system-specific variables. -case $host_os in -aix*) - symcode='[BCDT]' - ;; -cygwin* | mingw* | pw32* | cegcc*) - symcode='[ABCDGISTW]' - ;; -hpux*) - if test "$host_cpu" = ia64; then - symcode='[ABCDEGRST]' - fi - ;; -irix* | nonstopux*) - symcode='[BCDEGRST]' - ;; -osf*) - symcode='[BCDEGQRST]' - ;; -solaris*) - symcode='[BDRT]' - ;; -sco3.2v5*) - symcode='[DT]' - ;; -sysv4.2uw2*) - symcode='[DT]' - ;; -sysv5* | sco5v6* | unixware* | OpenUNIX*) - symcode='[ABDT]' - ;; -sysv4) - symcode='[DFNSTU]' - ;; -esac - -# If we're using GNU nm, then use its standard symbol codes. -case `$NM -V 2>&1` in -*GNU* | *'with BFD'*) - symcode='[ABCDGIRSTW]' ;; -esac - -# Transform an extracted symbol line into a proper C declaration. -# Some systems (esp. on ia64) link data and code symbols differently, -# so use this general approach. -lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" - -# Transform an extracted symbol line into symbol name and symbol address -lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\)[ ]*$/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"\2\", (void *) \&\2},/p'" -lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([^ ]*\)[ ]*$/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \(lib[^ ]*\)$/ {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"lib\2\", (void *) \&\2},/p'" - -# Handle CRLF in mingw tool chain -opt_cr= -case $build_os in -mingw*) - opt_cr=`$ECHO 'x\{0,1\}' | tr x '\015'` # option cr in regexp - ;; -esac - -# Try without a prefix underscore, then with it. -for ac_symprfx in "" "_"; do - - # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol. - symxfrm="\\1 $ac_symprfx\\2 \\2" - - # Write the raw and C identifiers. - if test "$lt_cv_nm_interface" = "MS dumpbin"; then - # Fake it for dumpbin and say T for any non-static function - # and D for any global variable. - # Also find C++ and __fastcall symbols from MSVC++, - # which start with @ or ?. - lt_cv_sys_global_symbol_pipe="$AWK '"\ -" {last_section=section; section=\$ 3};"\ -" /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\ -" \$ 0!~/External *\|/{next};"\ -" / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\ -" {if(hide[section]) next};"\ -" {f=0}; \$ 0~/\(\).*\|/{f=1}; {printf f ? \"T \" : \"D \"};"\ -" {split(\$ 0, a, /\||\r/); split(a[2], s)};"\ -" s[1]~/^[@?]/{print s[1], s[1]; next};"\ -" s[1]~prfx {split(s[1],t,\"@\"); print t[1], substr(t[1],length(prfx))}"\ -" ' prfx=^$ac_symprfx" - else - lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[ ]\($symcode$symcode*\)[ ][ ]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'" - fi - lt_cv_sys_global_symbol_pipe="$lt_cv_sys_global_symbol_pipe | sed '/ __gnu_lto/d'" - - # Check to see that the pipe works correctly. - pipe_works=no - - rm -f conftest* - cat > conftest.$ac_ext <<_LT_EOF -#ifdef __cplusplus -extern "C" { -#endif -char nm_test_var; -void nm_test_func(void); -void nm_test_func(void){} -#ifdef __cplusplus -} -#endif -int main(){nm_test_var='a';nm_test_func();return(0);} -_LT_EOF - - if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then - # Now try to grab the symbols. - nlist=conftest.nm - if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist\""; } >&5 - (eval $NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist) 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } && test -s "$nlist"; then - # Try sorting and uniquifying the output. - if sort "$nlist" | uniq > "$nlist"T; then - mv -f "$nlist"T "$nlist" - else - rm -f "$nlist"T - fi - - # Make sure that we snagged all the symbols we need. - if $GREP ' nm_test_var$' "$nlist" >/dev/null; then - if $GREP ' nm_test_func$' "$nlist" >/dev/null; then - cat <<_LT_EOF > conftest.$ac_ext -/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests. */ -#if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE) -/* DATA imports from DLLs on WIN32 con't be const, because runtime - relocations are performed -- see ld's documentation on pseudo-relocs. */ -# define LT@&t@_DLSYM_CONST -#elif defined(__osf__) -/* This system does not cope well with relocations in const data. */ -# define LT@&t@_DLSYM_CONST -#else -# define LT@&t@_DLSYM_CONST const -#endif - -#ifdef __cplusplus -extern "C" { -#endif - -_LT_EOF - # Now generate the symbol file. - eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | $GREP -v main >> conftest.$ac_ext' - - cat <<_LT_EOF >> conftest.$ac_ext - -/* The mapping between symbol names and symbols. */ -LT@&t@_DLSYM_CONST struct { - const char *name; - void *address; -} -lt__PROGRAM__LTX_preloaded_symbols[] = -{ - { "@PROGRAM@", (void *) 0 }, -_LT_EOF - $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (void *) \&\2},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext - cat <<\_LT_EOF >> conftest.$ac_ext - {0, (void *) 0} -}; - -/* This works around a problem in FreeBSD linker */ -#ifdef FREEBSD_WORKAROUND -static const void *lt_preloaded_setup() { - return lt__PROGRAM__LTX_preloaded_symbols; -} -#endif - -#ifdef __cplusplus -} -#endif -_LT_EOF - # Now try linking the two files. - mv conftest.$ac_objext conftstm.$ac_objext - lt_globsym_save_LIBS=$LIBS - lt_globsym_save_CFLAGS=$CFLAGS - LIBS="conftstm.$ac_objext" - CFLAGS="$CFLAGS$lt_prog_compiler_no_builtin_flag" - if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5 - (eval $ac_link) 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } && test -s conftest${ac_exeext}; then - pipe_works=yes - fi - LIBS=$lt_globsym_save_LIBS - CFLAGS=$lt_globsym_save_CFLAGS - else - echo "cannot find nm_test_func in $nlist" >&5 - fi - else - echo "cannot find nm_test_var in $nlist" >&5 - fi - else - echo "cannot run $lt_cv_sys_global_symbol_pipe" >&5 - fi - else - echo "$progname: failed program was:" >&5 - cat conftest.$ac_ext >&5 - fi - rm -rf conftest* conftst* - - # Do not use the global_symbol_pipe unless it works. - if test "$pipe_works" = yes; then - break - else - lt_cv_sys_global_symbol_pipe= - fi -done - -fi - -if test -z "$lt_cv_sys_global_symbol_pipe"; then - lt_cv_sys_global_symbol_to_cdecl= -fi -if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: failed" >&5 -$as_echo "failed" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: ok" >&5 -$as_echo "ok" >&6; } -fi - -# Response file support. -if test "$lt_cv_nm_interface" = "MS dumpbin"; then - nm_file_list_spec='@' -elif $NM --help 2>/dev/null | grep '[@]FILE' >/dev/null; then - nm_file_list_spec='@' -fi - - - - - - - - - - - - - - - - - - - - - - - - - - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for sysroot" >&5 -$as_echo_n "checking for sysroot... " >&6; } - -@%:@ Check whether --with-sysroot was given. -if test "${with_sysroot+set}" = set; then : - withval=$with_sysroot; -else - with_sysroot=no -fi - - -lt_sysroot= -case ${with_sysroot} in #( - yes) - if test "$GCC" = yes; then - lt_sysroot=`$CC --print-sysroot 2>/dev/null` - fi - ;; #( - /*) - lt_sysroot=`echo "$with_sysroot" | sed -e "$sed_quote_subst"` - ;; #( - no|'') - ;; #( - *) - { $as_echo "$as_me:${as_lineno-$LINENO}: result: ${with_sysroot}" >&5 -$as_echo "${with_sysroot}" >&6; } - as_fn_error $? "The sysroot must be an absolute path." "$LINENO" 5 - ;; -esac - - { $as_echo "$as_me:${as_lineno-$LINENO}: result: ${lt_sysroot:-no}" >&5 -$as_echo "${lt_sysroot:-no}" >&6; } - - - - - -@%:@ Check whether --enable-libtool-lock was given. -if test "${enable_libtool_lock+set}" = set; then : - enableval=$enable_libtool_lock; -fi - -test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes - -# Some flags need to be propagated to the compiler or linker for good -# libtool support. -case $host in -ia64-*-hpux*) - # Find out which ABI we are using. - echo 'int i;' > conftest.$ac_ext - if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then - case `/usr/bin/file conftest.$ac_objext` in - *ELF-32*) - HPUX_IA64_MODE="32" - ;; - *ELF-64*) - HPUX_IA64_MODE="64" - ;; - esac - fi - rm -rf conftest* - ;; -*-*-irix6*) - # Find out which ABI we are using. - echo '#line '$LINENO' "configure"' > conftest.$ac_ext - if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then - if test "$lt_cv_prog_gnu_ld" = yes; then - case `/usr/bin/file conftest.$ac_objext` in - *32-bit*) - LD="${LD-ld} -melf32bsmip" - ;; - *N32*) - LD="${LD-ld} -melf32bmipn32" - ;; - *64-bit*) - LD="${LD-ld} -melf64bmip" - ;; - esac - else - case `/usr/bin/file conftest.$ac_objext` in - *32-bit*) - LD="${LD-ld} -32" - ;; - *N32*) - LD="${LD-ld} -n32" - ;; - *64-bit*) - LD="${LD-ld} -64" - ;; - esac - fi - fi - rm -rf conftest* - ;; - -x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \ -s390*-*linux*|s390*-*tpf*|sparc*-*linux*) - # Find out which ABI we are using. - echo 'int i;' > conftest.$ac_ext - if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then - case `/usr/bin/file conftest.o` in - *32-bit*) - case $host in - x86_64-*kfreebsd*-gnu) - LD="${LD-ld} -m elf_i386_fbsd" - ;; - x86_64-*linux*) - LD="${LD-ld} -m elf_i386" - ;; - ppc64-*linux*|powerpc64-*linux*) - LD="${LD-ld} -m elf32ppclinux" - ;; - s390x-*linux*) - LD="${LD-ld} -m elf_s390" - ;; - sparc64-*linux*) - LD="${LD-ld} -m elf32_sparc" - ;; - esac - ;; - *64-bit*) - case $host in - x86_64-*kfreebsd*-gnu) - LD="${LD-ld} -m elf_x86_64_fbsd" - ;; - x86_64-*linux*) - LD="${LD-ld} -m elf_x86_64" - ;; - ppc*-*linux*|powerpc*-*linux*) - LD="${LD-ld} -m elf64ppc" - ;; - s390*-*linux*|s390*-*tpf*) - LD="${LD-ld} -m elf64_s390" - ;; - sparc*-*linux*) - LD="${LD-ld} -m elf64_sparc" - ;; - esac - ;; - esac - fi - rm -rf conftest* - ;; - -*-*-sco3.2v5*) - # On SCO OpenServer 5, we need -belf to get full-featured binaries. - SAVE_CFLAGS="$CFLAGS" - CFLAGS="$CFLAGS -belf" - { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler needs -belf" >&5 -$as_echo_n "checking whether the C compiler needs -belf... " >&6; } -if ${lt_cv_cc_needs_belf+:} false; then : - $as_echo_n "(cached) " >&6 -else - ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - lt_cv_cc_needs_belf=yes -else - lt_cv_cc_needs_belf=no -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext - ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_cc_needs_belf" >&5 -$as_echo "$lt_cv_cc_needs_belf" >&6; } - if test x"$lt_cv_cc_needs_belf" != x"yes"; then - # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf - CFLAGS="$SAVE_CFLAGS" - fi - ;; -sparc*-*solaris*) - # Find out which ABI we are using. - echo 'int i;' > conftest.$ac_ext - if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then - case `/usr/bin/file conftest.o` in - *64-bit*) - case $lt_cv_prog_gnu_ld in - yes*) LD="${LD-ld} -m elf64_sparc" ;; - *) - if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then - LD="${LD-ld} -64" - fi - ;; - esac - ;; - esac - fi - rm -rf conftest* - ;; -esac - -need_locks="$enable_libtool_lock" - -if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}mt", so it can be a program name with args. -set dummy ${ac_tool_prefix}mt; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_MANIFEST_TOOL+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$MANIFEST_TOOL"; then - ac_cv_prog_MANIFEST_TOOL="$MANIFEST_TOOL" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_MANIFEST_TOOL="${ac_tool_prefix}mt" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -MANIFEST_TOOL=$ac_cv_prog_MANIFEST_TOOL -if test -n "$MANIFEST_TOOL"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MANIFEST_TOOL" >&5 -$as_echo "$MANIFEST_TOOL" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -fi -if test -z "$ac_cv_prog_MANIFEST_TOOL"; then - ac_ct_MANIFEST_TOOL=$MANIFEST_TOOL - # Extract the first word of "mt", so it can be a program name with args. -set dummy mt; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_MANIFEST_TOOL+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_MANIFEST_TOOL"; then - ac_cv_prog_ac_ct_MANIFEST_TOOL="$ac_ct_MANIFEST_TOOL" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_MANIFEST_TOOL="mt" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_MANIFEST_TOOL=$ac_cv_prog_ac_ct_MANIFEST_TOOL -if test -n "$ac_ct_MANIFEST_TOOL"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_MANIFEST_TOOL" >&5 -$as_echo "$ac_ct_MANIFEST_TOOL" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - if test "x$ac_ct_MANIFEST_TOOL" = x; then - MANIFEST_TOOL=":" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - MANIFEST_TOOL=$ac_ct_MANIFEST_TOOL - fi -else - MANIFEST_TOOL="$ac_cv_prog_MANIFEST_TOOL" -fi - -test -z "$MANIFEST_TOOL" && MANIFEST_TOOL=mt -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $MANIFEST_TOOL is a manifest tool" >&5 -$as_echo_n "checking if $MANIFEST_TOOL is a manifest tool... " >&6; } -if ${lt_cv_path_mainfest_tool+:} false; then : - $as_echo_n "(cached) " >&6 -else - lt_cv_path_mainfest_tool=no - echo "$as_me:$LINENO: $MANIFEST_TOOL '-?'" >&5 - $MANIFEST_TOOL '-?' 2>conftest.err > conftest.out - cat conftest.err >&5 - if $GREP 'Manifest Tool' conftest.out > /dev/null; then - lt_cv_path_mainfest_tool=yes - fi - rm -f conftest* -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_mainfest_tool" >&5 -$as_echo "$lt_cv_path_mainfest_tool" >&6; } -if test "x$lt_cv_path_mainfest_tool" != xyes; then - MANIFEST_TOOL=: -fi - - - - - - - case $host_os in - rhapsody* | darwin*) - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}dsymutil", so it can be a program name with args. -set dummy ${ac_tool_prefix}dsymutil; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_DSYMUTIL+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$DSYMUTIL"; then - ac_cv_prog_DSYMUTIL="$DSYMUTIL" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_DSYMUTIL="${ac_tool_prefix}dsymutil" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -DSYMUTIL=$ac_cv_prog_DSYMUTIL -if test -n "$DSYMUTIL"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DSYMUTIL" >&5 -$as_echo "$DSYMUTIL" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -fi -if test -z "$ac_cv_prog_DSYMUTIL"; then - ac_ct_DSYMUTIL=$DSYMUTIL - # Extract the first word of "dsymutil", so it can be a program name with args. -set dummy dsymutil; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_DSYMUTIL+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_DSYMUTIL"; then - ac_cv_prog_ac_ct_DSYMUTIL="$ac_ct_DSYMUTIL" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_DSYMUTIL="dsymutil" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_DSYMUTIL=$ac_cv_prog_ac_ct_DSYMUTIL -if test -n "$ac_ct_DSYMUTIL"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DSYMUTIL" >&5 -$as_echo "$ac_ct_DSYMUTIL" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - if test "x$ac_ct_DSYMUTIL" = x; then - DSYMUTIL=":" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - DSYMUTIL=$ac_ct_DSYMUTIL - fi -else - DSYMUTIL="$ac_cv_prog_DSYMUTIL" -fi - - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}nmedit", so it can be a program name with args. -set dummy ${ac_tool_prefix}nmedit; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_NMEDIT+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$NMEDIT"; then - ac_cv_prog_NMEDIT="$NMEDIT" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_NMEDIT="${ac_tool_prefix}nmedit" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -NMEDIT=$ac_cv_prog_NMEDIT -if test -n "$NMEDIT"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $NMEDIT" >&5 -$as_echo "$NMEDIT" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -fi -if test -z "$ac_cv_prog_NMEDIT"; then - ac_ct_NMEDIT=$NMEDIT - # Extract the first word of "nmedit", so it can be a program name with args. -set dummy nmedit; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_NMEDIT+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_NMEDIT"; then - ac_cv_prog_ac_ct_NMEDIT="$ac_ct_NMEDIT" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_NMEDIT="nmedit" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_NMEDIT=$ac_cv_prog_ac_ct_NMEDIT -if test -n "$ac_ct_NMEDIT"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_NMEDIT" >&5 -$as_echo "$ac_ct_NMEDIT" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - if test "x$ac_ct_NMEDIT" = x; then - NMEDIT=":" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - NMEDIT=$ac_ct_NMEDIT - fi -else - NMEDIT="$ac_cv_prog_NMEDIT" -fi - - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}lipo", so it can be a program name with args. -set dummy ${ac_tool_prefix}lipo; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_LIPO+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$LIPO"; then - ac_cv_prog_LIPO="$LIPO" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_LIPO="${ac_tool_prefix}lipo" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -LIPO=$ac_cv_prog_LIPO -if test -n "$LIPO"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LIPO" >&5 -$as_echo "$LIPO" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -fi -if test -z "$ac_cv_prog_LIPO"; then - ac_ct_LIPO=$LIPO - # Extract the first word of "lipo", so it can be a program name with args. -set dummy lipo; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_LIPO+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_LIPO"; then - ac_cv_prog_ac_ct_LIPO="$ac_ct_LIPO" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_LIPO="lipo" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_LIPO=$ac_cv_prog_ac_ct_LIPO -if test -n "$ac_ct_LIPO"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_LIPO" >&5 -$as_echo "$ac_ct_LIPO" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - if test "x$ac_ct_LIPO" = x; then - LIPO=":" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - LIPO=$ac_ct_LIPO - fi -else - LIPO="$ac_cv_prog_LIPO" -fi - - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}otool", so it can be a program name with args. -set dummy ${ac_tool_prefix}otool; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_OTOOL+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$OTOOL"; then - ac_cv_prog_OTOOL="$OTOOL" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_OTOOL="${ac_tool_prefix}otool" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -OTOOL=$ac_cv_prog_OTOOL -if test -n "$OTOOL"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OTOOL" >&5 -$as_echo "$OTOOL" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -fi -if test -z "$ac_cv_prog_OTOOL"; then - ac_ct_OTOOL=$OTOOL - # Extract the first word of "otool", so it can be a program name with args. -set dummy otool; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_OTOOL+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_OTOOL"; then - ac_cv_prog_ac_ct_OTOOL="$ac_ct_OTOOL" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_OTOOL="otool" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_OTOOL=$ac_cv_prog_ac_ct_OTOOL -if test -n "$ac_ct_OTOOL"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OTOOL" >&5 -$as_echo "$ac_ct_OTOOL" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - if test "x$ac_ct_OTOOL" = x; then - OTOOL=":" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - OTOOL=$ac_ct_OTOOL - fi -else - OTOOL="$ac_cv_prog_OTOOL" -fi - - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}otool64", so it can be a program name with args. -set dummy ${ac_tool_prefix}otool64; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_OTOOL64+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$OTOOL64"; then - ac_cv_prog_OTOOL64="$OTOOL64" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_OTOOL64="${ac_tool_prefix}otool64" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -OTOOL64=$ac_cv_prog_OTOOL64 -if test -n "$OTOOL64"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OTOOL64" >&5 -$as_echo "$OTOOL64" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -fi -if test -z "$ac_cv_prog_OTOOL64"; then - ac_ct_OTOOL64=$OTOOL64 - # Extract the first word of "otool64", so it can be a program name with args. -set dummy otool64; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_OTOOL64+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_OTOOL64"; then - ac_cv_prog_ac_ct_OTOOL64="$ac_ct_OTOOL64" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_OTOOL64="otool64" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_OTOOL64=$ac_cv_prog_ac_ct_OTOOL64 -if test -n "$ac_ct_OTOOL64"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OTOOL64" >&5 -$as_echo "$ac_ct_OTOOL64" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - if test "x$ac_ct_OTOOL64" = x; then - OTOOL64=":" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - OTOOL64=$ac_ct_OTOOL64 - fi -else - OTOOL64="$ac_cv_prog_OTOOL64" -fi - - - - - - - - - - - - - - - - - - - - - - - - - - - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -single_module linker flag" >&5 -$as_echo_n "checking for -single_module linker flag... " >&6; } -if ${lt_cv_apple_cc_single_mod+:} false; then : - $as_echo_n "(cached) " >&6 -else - lt_cv_apple_cc_single_mod=no - if test -z "${LT_MULTI_MODULE}"; then - # By default we will add the -single_module flag. You can override - # by either setting the environment variable LT_MULTI_MODULE - # non-empty at configure time, or by adding -multi_module to the - # link flags. - rm -rf libconftest.dylib* - echo "int foo(void){return 1;}" > conftest.c - echo "$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \ --dynamiclib -Wl,-single_module conftest.c" >&5 - $LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \ - -dynamiclib -Wl,-single_module conftest.c 2>conftest.err - _lt_result=$? - if test -f libconftest.dylib && test ! -s conftest.err && test $_lt_result = 0; then - lt_cv_apple_cc_single_mod=yes - else - cat conftest.err >&5 - fi - rm -rf libconftest.dylib* - rm -f conftest.* - fi -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_apple_cc_single_mod" >&5 -$as_echo "$lt_cv_apple_cc_single_mod" >&6; } - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -exported_symbols_list linker flag" >&5 -$as_echo_n "checking for -exported_symbols_list linker flag... " >&6; } -if ${lt_cv_ld_exported_symbols_list+:} false; then : - $as_echo_n "(cached) " >&6 -else - lt_cv_ld_exported_symbols_list=no - save_LDFLAGS=$LDFLAGS - echo "_main" > conftest.sym - LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - lt_cv_ld_exported_symbols_list=yes -else - lt_cv_ld_exported_symbols_list=no -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext - LDFLAGS="$save_LDFLAGS" - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_exported_symbols_list" >&5 -$as_echo "$lt_cv_ld_exported_symbols_list" >&6; } - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -force_load linker flag" >&5 -$as_echo_n "checking for -force_load linker flag... " >&6; } -if ${lt_cv_ld_force_load+:} false; then : - $as_echo_n "(cached) " >&6 -else - lt_cv_ld_force_load=no - cat > conftest.c << _LT_EOF -int forced_loaded() { return 2;} -_LT_EOF - echo "$LTCC $LTCFLAGS -c -o conftest.o conftest.c" >&5 - $LTCC $LTCFLAGS -c -o conftest.o conftest.c 2>&5 - echo "$AR cru libconftest.a conftest.o" >&5 - $AR cru libconftest.a conftest.o 2>&5 - echo "$RANLIB libconftest.a" >&5 - $RANLIB libconftest.a 2>&5 - cat > conftest.c << _LT_EOF -int main() { return 0;} -_LT_EOF - echo "$LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a" >&5 - $LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a 2>conftest.err - _lt_result=$? - if test -f conftest && test ! -s conftest.err && test $_lt_result = 0 && $GREP forced_load conftest 2>&1 >/dev/null; then - lt_cv_ld_force_load=yes - else - cat conftest.err >&5 - fi - rm -f conftest.err libconftest.a conftest conftest.c - rm -rf conftest.dSYM - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_force_load" >&5 -$as_echo "$lt_cv_ld_force_load" >&6; } - case $host_os in - rhapsody* | darwin1.[012]) - _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;; - darwin1.*) - _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; - darwin*) # darwin 5.x on - # if running on 10.5 or later, the deployment target defaults - # to the OS version, if on x86, and 10.4, the deployment - # target defaults to 10.4. Don't you love it? - case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in - 10.0,*86*-darwin8*|10.0,*-darwin[91]*) - _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;; - 10.[012]*) - _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; - 10.*) - _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;; - esac - ;; - esac - if test "$lt_cv_apple_cc_single_mod" = "yes"; then - _lt_dar_single_mod='$single_module' - fi - if test "$lt_cv_ld_exported_symbols_list" = "yes"; then - _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym' - else - _lt_dar_export_syms='~$NMEDIT -s $output_objdir/${libname}-symbols.expsym ${lib}' - fi - if test "$DSYMUTIL" != ":" && test "$lt_cv_ld_force_load" = "no"; then - _lt_dsymutil='~$DSYMUTIL $lib || :' - else - _lt_dsymutil= - fi - ;; - esac - -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to run the C preprocessor" >&5 -$as_echo_n "checking how to run the C preprocessor... " >&6; } -# On Suns, sometimes $CPP names a directory. -if test -n "$CPP" && test -d "$CPP"; then - CPP= -fi -if test -z "$CPP"; then - if ${ac_cv_prog_CPP+:} false; then : - $as_echo_n "(cached) " >&6 -else - # Double quotes because CPP needs to be expanded - for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp" - do - ac_preproc_ok=false -for ac_c_preproc_warn_flag in '' yes -do - # Use a header file that comes with gcc, so configuring glibc - # with a fresh cross-compiler works. - # Prefer to if __STDC__ is defined, since - # exists even on freestanding compilers. - # On the NeXT, cc -E runs the code through the compiler's parser, - # not just through cpp. "Syntax error" is here to catch this case. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -@%:@ifdef __STDC__ -@%:@ include -@%:@else -@%:@ include -@%:@endif - Syntax error -_ACEOF -if ac_fn_c_try_cpp "$LINENO"; then : - -else - # Broken: fails on valid input. -continue -fi -rm -f conftest.err conftest.i conftest.$ac_ext - - # OK, works on sane cases. Now check whether nonexistent headers - # can be detected and how. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -@%:@include -_ACEOF -if ac_fn_c_try_cpp "$LINENO"; then : - # Broken: success on invalid input. -continue -else - # Passes both tests. -ac_preproc_ok=: -break -fi -rm -f conftest.err conftest.i conftest.$ac_ext - -done -# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. -rm -f conftest.i conftest.err conftest.$ac_ext -if $ac_preproc_ok; then : - break -fi - - done - ac_cv_prog_CPP=$CPP - -fi - CPP=$ac_cv_prog_CPP -else - ac_cv_prog_CPP=$CPP -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $CPP" >&5 -$as_echo "$CPP" >&6; } -ac_preproc_ok=false -for ac_c_preproc_warn_flag in '' yes -do - # Use a header file that comes with gcc, so configuring glibc - # with a fresh cross-compiler works. - # Prefer to if __STDC__ is defined, since - # exists even on freestanding compilers. - # On the NeXT, cc -E runs the code through the compiler's parser, - # not just through cpp. "Syntax error" is here to catch this case. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -@%:@ifdef __STDC__ -@%:@ include -@%:@else -@%:@ include -@%:@endif - Syntax error -_ACEOF -if ac_fn_c_try_cpp "$LINENO"; then : - -else - # Broken: fails on valid input. -continue -fi -rm -f conftest.err conftest.i conftest.$ac_ext - - # OK, works on sane cases. Now check whether nonexistent headers - # can be detected and how. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -@%:@include -_ACEOF -if ac_fn_c_try_cpp "$LINENO"; then : - # Broken: success on invalid input. -continue -else - # Passes both tests. -ac_preproc_ok=: -break -fi -rm -f conftest.err conftest.i conftest.$ac_ext - -done -# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. -rm -f conftest.i conftest.err conftest.$ac_ext -if $ac_preproc_ok; then : - -else - { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error $? "C preprocessor \"$CPP\" fails sanity check -See \`config.log' for more details" "$LINENO" 5; } -fi - -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ANSI C header files" >&5 -$as_echo_n "checking for ANSI C header files... " >&6; } -if ${ac_cv_header_stdc+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include -#include -#include -#include - -int -main () -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - ac_cv_header_stdc=yes -else - ac_cv_header_stdc=no -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - -if test $ac_cv_header_stdc = yes; then - # SunOS 4.x string.h does not declare mem*, contrary to ANSI. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include - -_ACEOF -if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - $EGREP "memchr" >/dev/null 2>&1; then : - -else - ac_cv_header_stdc=no -fi -rm -f conftest* - -fi - -if test $ac_cv_header_stdc = yes; then - # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include - -_ACEOF -if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - $EGREP "free" >/dev/null 2>&1; then : - -else - ac_cv_header_stdc=no -fi -rm -f conftest* - -fi - -if test $ac_cv_header_stdc = yes; then - # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi. - if test "$cross_compiling" = yes; then : - : -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include -#include -#if ((' ' & 0x0FF) == 0x020) -# define ISLOWER(c) ('a' <= (c) && (c) <= 'z') -# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) -#else -# define ISLOWER(c) \ - (('a' <= (c) && (c) <= 'i') \ - || ('j' <= (c) && (c) <= 'r') \ - || ('s' <= (c) && (c) <= 'z')) -# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c)) -#endif - -#define XOR(e, f) (((e) && !(f)) || (!(e) && (f))) -int -main () -{ - int i; - for (i = 0; i < 256; i++) - if (XOR (islower (i), ISLOWER (i)) - || toupper (i) != TOUPPER (i)) - return 2; - return 0; -} -_ACEOF -if ac_fn_c_try_run "$LINENO"; then : - -else - ac_cv_header_stdc=no -fi -rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ - conftest.$ac_objext conftest.beam conftest.$ac_ext -fi - -fi -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_stdc" >&5 -$as_echo "$ac_cv_header_stdc" >&6; } -if test $ac_cv_header_stdc = yes; then - -$as_echo "@%:@define STDC_HEADERS 1" >>confdefs.h - -fi - -# On IRIX 5.3, sys/types and inttypes.h are conflicting. -for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \ - inttypes.h stdint.h unistd.h -do : - as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` -ac_fn_c_check_header_compile "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default -" -if eval test \"x\$"$as_ac_Header"\" = x"yes"; then : - cat >>confdefs.h <<_ACEOF -@%:@define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 -_ACEOF - -fi - -done - - -for ac_header in dlfcn.h -do : - ac_fn_c_check_header_compile "$LINENO" "dlfcn.h" "ac_cv_header_dlfcn_h" "$ac_includes_default -" -if test "x$ac_cv_header_dlfcn_h" = xyes; then : - cat >>confdefs.h <<_ACEOF -@%:@define HAVE_DLFCN_H 1 -_ACEOF - -fi - -done - - - - - -# Set options - - - - enable_dlopen=no - - - enable_win32_dll=no - - - @%:@ Check whether --enable-shared was given. -if test "${enable_shared+set}" = set; then : - enableval=$enable_shared; p=${PACKAGE-default} - case $enableval in - yes) enable_shared=yes ;; - no) enable_shared=no ;; - *) - enable_shared=no - # Look at the argument we got. We use all the common list separators. - lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," - for pkg in $enableval; do - IFS="$lt_save_ifs" - if test "X$pkg" = "X$p"; then - enable_shared=yes - fi - done - IFS="$lt_save_ifs" - ;; - esac -else - enable_shared=yes -fi - - - - - - - - - - - -@%:@ Check whether --with-pic was given. -if test "${with_pic+set}" = set; then : - withval=$with_pic; pic_mode="$withval" -else - pic_mode=default -fi - - -test -z "$pic_mode" && pic_mode=default - - - - - - - - @%:@ Check whether --enable-fast-install was given. -if test "${enable_fast_install+set}" = set; then : - enableval=$enable_fast_install; p=${PACKAGE-default} - case $enableval in - yes) enable_fast_install=yes ;; - no) enable_fast_install=no ;; - *) - enable_fast_install=no - # Look at the argument we got. We use all the common list separators. - lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," - for pkg in $enableval; do - IFS="$lt_save_ifs" - if test "X$pkg" = "X$p"; then - enable_fast_install=yes - fi - done - IFS="$lt_save_ifs" - ;; - esac -else - enable_fast_install=yes -fi - - - - - - - - - - - -# This can be used to rebuild libtool when needed -LIBTOOL_DEPS="$ltmain" - -# Always use our own libtool. -LIBTOOL='$(SHELL) $(top_builddir)/libtool' - - - - - - - - - - - - - - - - - - - - - - - - - - -test -z "$LN_S" && LN_S="ln -s" - - - - - - - - - - - - - - -if test -n "${ZSH_VERSION+set}" ; then - setopt NO_GLOB_SUBST -fi - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for objdir" >&5 -$as_echo_n "checking for objdir... " >&6; } -if ${lt_cv_objdir+:} false; then : - $as_echo_n "(cached) " >&6 -else - rm -f .libs 2>/dev/null -mkdir .libs 2>/dev/null -if test -d .libs; then - lt_cv_objdir=.libs -else - # MS-DOS does not allow filenames that begin with a dot. - lt_cv_objdir=_libs -fi -rmdir .libs 2>/dev/null -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_objdir" >&5 -$as_echo "$lt_cv_objdir" >&6; } -objdir=$lt_cv_objdir - - - - - -cat >>confdefs.h <<_ACEOF -@%:@define LT_OBJDIR "$lt_cv_objdir/" -_ACEOF - - - - -case $host_os in -aix3*) - # AIX sometimes has problems with the GCC collect2 program. For some - # reason, if we set the COLLECT_NAMES environment variable, the problems - # vanish in a puff of smoke. - if test "X${COLLECT_NAMES+set}" != Xset; then - COLLECT_NAMES= - export COLLECT_NAMES - fi - ;; -esac - -# Global variables: -ofile=libtool -can_build_shared=yes - -# All known linkers require a `.a' archive for static linking (except MSVC, -# which needs '.lib'). -libext=a - -with_gnu_ld="$lt_cv_prog_gnu_ld" - -old_CC="$CC" -old_CFLAGS="$CFLAGS" - -# Set sane defaults for various variables -test -z "$CC" && CC=cc -test -z "$LTCC" && LTCC=$CC -test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS -test -z "$LD" && LD=ld -test -z "$ac_objext" && ac_objext=o - -for cc_temp in $compiler""; do - case $cc_temp in - compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; - distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; - \-*) ;; - *) break;; - esac -done -cc_basename=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"` - - -# Only perform the check for file, if the check method requires it -test -z "$MAGIC_CMD" && MAGIC_CMD=file -case $deplibs_check_method in -file_magic*) - if test "$file_magic_cmd" = '$MAGIC_CMD'; then - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ${ac_tool_prefix}file" >&5 -$as_echo_n "checking for ${ac_tool_prefix}file... " >&6; } -if ${lt_cv_path_MAGIC_CMD+:} false; then : - $as_echo_n "(cached) " >&6 -else - case $MAGIC_CMD in -[\\/*] | ?:[\\/]*) - lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. - ;; -*) - lt_save_MAGIC_CMD="$MAGIC_CMD" - lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR - ac_dummy="/usr/bin$PATH_SEPARATOR$PATH" - for ac_dir in $ac_dummy; do - IFS="$lt_save_ifs" - test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/${ac_tool_prefix}file; then - lt_cv_path_MAGIC_CMD="$ac_dir/${ac_tool_prefix}file" - if test -n "$file_magic_test_file"; then - case $deplibs_check_method in - "file_magic "*) - file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"` - MAGIC_CMD="$lt_cv_path_MAGIC_CMD" - if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | - $EGREP "$file_magic_regex" > /dev/null; then - : - else - cat <<_LT_EOF 1>&2 - -*** Warning: the command libtool uses to detect shared libraries, -*** $file_magic_cmd, produces output that libtool cannot recognize. -*** The result is that libtool may fail to recognize shared libraries -*** as such. This will affect the creation of libtool libraries that -*** depend on shared libraries, but programs linked with such libtool -*** libraries will work regardless of this problem. Nevertheless, you -*** may want to report the problem to your system manager and/or to -*** bug-libtool@gnu.org - -_LT_EOF - fi ;; - esac - fi - break - fi - done - IFS="$lt_save_ifs" - MAGIC_CMD="$lt_save_MAGIC_CMD" - ;; -esac -fi - -MAGIC_CMD="$lt_cv_path_MAGIC_CMD" -if test -n "$MAGIC_CMD"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MAGIC_CMD" >&5 -$as_echo "$MAGIC_CMD" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - - - -if test -z "$lt_cv_path_MAGIC_CMD"; then - if test -n "$ac_tool_prefix"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for file" >&5 -$as_echo_n "checking for file... " >&6; } -if ${lt_cv_path_MAGIC_CMD+:} false; then : - $as_echo_n "(cached) " >&6 -else - case $MAGIC_CMD in -[\\/*] | ?:[\\/]*) - lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. - ;; -*) - lt_save_MAGIC_CMD="$MAGIC_CMD" - lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR - ac_dummy="/usr/bin$PATH_SEPARATOR$PATH" - for ac_dir in $ac_dummy; do - IFS="$lt_save_ifs" - test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/file; then - lt_cv_path_MAGIC_CMD="$ac_dir/file" - if test -n "$file_magic_test_file"; then - case $deplibs_check_method in - "file_magic "*) - file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"` - MAGIC_CMD="$lt_cv_path_MAGIC_CMD" - if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | - $EGREP "$file_magic_regex" > /dev/null; then - : - else - cat <<_LT_EOF 1>&2 - -*** Warning: the command libtool uses to detect shared libraries, -*** $file_magic_cmd, produces output that libtool cannot recognize. -*** The result is that libtool may fail to recognize shared libraries -*** as such. This will affect the creation of libtool libraries that -*** depend on shared libraries, but programs linked with such libtool -*** libraries will work regardless of this problem. Nevertheless, you -*** may want to report the problem to your system manager and/or to -*** bug-libtool@gnu.org - -_LT_EOF - fi ;; - esac - fi - break - fi - done - IFS="$lt_save_ifs" - MAGIC_CMD="$lt_save_MAGIC_CMD" - ;; -esac -fi - -MAGIC_CMD="$lt_cv_path_MAGIC_CMD" -if test -n "$MAGIC_CMD"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MAGIC_CMD" >&5 -$as_echo "$MAGIC_CMD" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - else - MAGIC_CMD=: - fi -fi - - fi - ;; -esac - -# Use C for the default configuration in the libtool script - -lt_save_CC="$CC" -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - - -# Source file extension for C test sources. -ac_ext=c - -# Object file extension for compiled C test sources. -objext=o -objext=$objext - -# Code to be used in simple compile tests -lt_simple_compile_test_code="int some_variable = 0;" - -# Code to be used in simple link tests -lt_simple_link_test_code='int main(){return(0);}' - - - - - - - -# If no C compiler was specified, use CC. -LTCC=${LTCC-"$CC"} - -# If no C compiler flags were specified, use CFLAGS. -LTCFLAGS=${LTCFLAGS-"$CFLAGS"} - -# Allow CC to be a program name with arguments. -compiler=$CC - -# Save the default compiler, since it gets overwritten when the other -# tags are being tested, and _LT_TAGVAR(compiler, []) is a NOP. -compiler_DEFAULT=$CC - -# save warnings/boilerplate of simple test code -ac_outfile=conftest.$ac_objext -echo "$lt_simple_compile_test_code" >conftest.$ac_ext -eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err -_lt_compiler_boilerplate=`cat conftest.err` -$RM conftest* - -ac_outfile=conftest.$ac_objext -echo "$lt_simple_link_test_code" >conftest.$ac_ext -eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err -_lt_linker_boilerplate=`cat conftest.err` -$RM -r conftest* - - -## CAVEAT EMPTOR: -## There is no encapsulation within the following macros, do not change -## the running order or otherwise move them around unless you know exactly -## what you are doing... -if test -n "$compiler"; then - -lt_prog_compiler_no_builtin_flag= - -if test "$GCC" = yes; then - case $cc_basename in - nvcc*) - lt_prog_compiler_no_builtin_flag=' -Xcompiler -fno-builtin' ;; - *) - lt_prog_compiler_no_builtin_flag=' -fno-builtin' ;; - esac - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -fno-rtti -fno-exceptions" >&5 -$as_echo_n "checking if $compiler supports -fno-rtti -fno-exceptions... " >&6; } -if ${lt_cv_prog_compiler_rtti_exceptions+:} false; then : - $as_echo_n "(cached) " >&6 -else - lt_cv_prog_compiler_rtti_exceptions=no - ac_outfile=conftest.$ac_objext - echo "$lt_simple_compile_test_code" > conftest.$ac_ext - lt_compiler_flag="-fno-rtti -fno-exceptions" - # Insert the option either (1) after the last *FLAGS variable, or - # (2) before a word containing "conftest.", or (3) at the end. - # Note that $ac_compile itself does not contain backslashes and begins - # with a dollar sign (not a hyphen), so the echo should work correctly. - # The option is referenced via a variable to avoid confusing sed. - lt_compile=`echo "$ac_compile" | $SED \ - -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ - -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ - -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5) - (eval "$lt_compile" 2>conftest.err) - ac_status=$? - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - if (exit $ac_status) && test -s "$ac_outfile"; then - # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings other than the usual output. - $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp - $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 - if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then - lt_cv_prog_compiler_rtti_exceptions=yes - fi - fi - $RM conftest* - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_rtti_exceptions" >&5 -$as_echo "$lt_cv_prog_compiler_rtti_exceptions" >&6; } - -if test x"$lt_cv_prog_compiler_rtti_exceptions" = xyes; then - lt_prog_compiler_no_builtin_flag="$lt_prog_compiler_no_builtin_flag -fno-rtti -fno-exceptions" -else - : -fi - -fi - - - - - - - lt_prog_compiler_wl= -lt_prog_compiler_pic= -lt_prog_compiler_static= - - - if test "$GCC" = yes; then - lt_prog_compiler_wl='-Wl,' - lt_prog_compiler_static='-static' - - case $host_os in - aix*) - # All AIX code is PIC. - if test "$host_cpu" = ia64; then - # AIX 5 now supports IA64 processor - lt_prog_compiler_static='-Bstatic' - fi - ;; - - amigaos*) - case $host_cpu in - powerpc) - # see comment about AmigaOS4 .so support - lt_prog_compiler_pic='-fPIC' - ;; - m68k) - # FIXME: we need at least 68020 code to build shared libraries, but - # adding the `-m68020' flag to GCC prevents building anything better, - # like `-m68040'. - lt_prog_compiler_pic='-m68020 -resident32 -malways-restore-a4' - ;; - esac - ;; - - beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) - # PIC is the default for these OSes. - ;; - - mingw* | cygwin* | pw32* | os2* | cegcc*) - # This hack is so that the source file can tell whether it is being - # built for inclusion in a dll (and should export symbols for example). - # Although the cygwin gcc ignores -fPIC, still need this for old-style - # (--disable-auto-import) libraries - lt_prog_compiler_pic='-DDLL_EXPORT' - ;; - - darwin* | rhapsody*) - # PIC is the default on this platform - # Common symbols not allowed in MH_DYLIB files - lt_prog_compiler_pic='-fno-common' - ;; - - haiku*) - # PIC is the default for Haiku. - # The "-static" flag exists, but is broken. - lt_prog_compiler_static= - ;; - - hpux*) - # PIC is the default for 64-bit PA HP-UX, but not for 32-bit - # PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag - # sets the default TLS model and affects inlining. - case $host_cpu in - hppa*64*) - # +Z the default - ;; - *) - lt_prog_compiler_pic='-fPIC' - ;; - esac - ;; - - interix[3-9]*) - # Interix 3.x gcc -fpic/-fPIC options generate broken code. - # Instead, we relocate shared libraries at runtime. - ;; - - msdosdjgpp*) - # Just because we use GCC doesn't mean we suddenly get shared libraries - # on systems that don't support them. - lt_prog_compiler_can_build_shared=no - enable_shared=no - ;; - - *nto* | *qnx*) - # QNX uses GNU C++, but need to define -shared option too, otherwise - # it will coredump. - lt_prog_compiler_pic='-fPIC -shared' - ;; - - sysv4*MP*) - if test -d /usr/nec; then - lt_prog_compiler_pic=-Kconform_pic - fi - ;; - - *) - lt_prog_compiler_pic='-fPIC' - ;; - esac - - case $cc_basename in - nvcc*) # Cuda Compiler Driver 2.2 - lt_prog_compiler_wl='-Xlinker ' - lt_prog_compiler_pic='-Xcompiler -fPIC' - ;; - esac - else - # PORTME Check for flag to pass linker flags through the system compiler. - case $host_os in - aix*) - lt_prog_compiler_wl='-Wl,' - if test "$host_cpu" = ia64; then - # AIX 5 now supports IA64 processor - lt_prog_compiler_static='-Bstatic' - else - lt_prog_compiler_static='-bnso -bI:/lib/syscalls.exp' - fi - ;; - - mingw* | cygwin* | pw32* | os2* | cegcc*) - # This hack is so that the source file can tell whether it is being - # built for inclusion in a dll (and should export symbols for example). - lt_prog_compiler_pic='-DDLL_EXPORT' - ;; - - hpux9* | hpux10* | hpux11*) - lt_prog_compiler_wl='-Wl,' - # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but - # not for PA HP-UX. - case $host_cpu in - hppa*64*|ia64*) - # +Z the default - ;; - *) - lt_prog_compiler_pic='+Z' - ;; - esac - # Is there a better lt_prog_compiler_static that works with the bundled CC? - lt_prog_compiler_static='${wl}-a ${wl}archive' - ;; - - irix5* | irix6* | nonstopux*) - lt_prog_compiler_wl='-Wl,' - # PIC (with -KPIC) is the default. - lt_prog_compiler_static='-non_shared' - ;; - - linux* | k*bsd*-gnu | kopensolaris*-gnu) - case $cc_basename in - # old Intel for x86_64 which still supported -KPIC. - ecc*) - lt_prog_compiler_wl='-Wl,' - lt_prog_compiler_pic='-KPIC' - lt_prog_compiler_static='-static' - ;; - # icc used to be incompatible with GCC. - # ICC 10 doesn't accept -KPIC any more. - icc* | ifort*) - lt_prog_compiler_wl='-Wl,' - lt_prog_compiler_pic='-fPIC' - lt_prog_compiler_static='-static' - ;; - # Lahey Fortran 8.1. - lf95*) - lt_prog_compiler_wl='-Wl,' - lt_prog_compiler_pic='--shared' - lt_prog_compiler_static='--static' - ;; - nagfor*) - # NAG Fortran compiler - lt_prog_compiler_wl='-Wl,-Wl,,' - lt_prog_compiler_pic='-PIC' - lt_prog_compiler_static='-Bstatic' - ;; - pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*) - # Portland Group compilers (*not* the Pentium gcc compiler, - # which looks to be a dead project) - lt_prog_compiler_wl='-Wl,' - lt_prog_compiler_pic='-fpic' - lt_prog_compiler_static='-Bstatic' - ;; - ccc*) - lt_prog_compiler_wl='-Wl,' - # All Alpha code is PIC. - lt_prog_compiler_static='-non_shared' - ;; - xl* | bgxl* | bgf* | mpixl*) - # IBM XL C 8.0/Fortran 10.1, 11.1 on PPC and BlueGene - lt_prog_compiler_wl='-Wl,' - lt_prog_compiler_pic='-qpic' - lt_prog_compiler_static='-qstaticlink' - ;; - *) - case `$CC -V 2>&1 | sed 5q` in - *Sun\ F* | *Sun*Fortran*) - # Sun Fortran 8.3 passes all unrecognized flags to the linker - lt_prog_compiler_pic='-KPIC' - lt_prog_compiler_static='-Bstatic' - lt_prog_compiler_wl='' - ;; - *Sun\ C*) - # Sun C 5.9 - lt_prog_compiler_pic='-KPIC' - lt_prog_compiler_static='-Bstatic' - lt_prog_compiler_wl='-Wl,' - ;; - esac - ;; - esac - ;; - - newsos6) - lt_prog_compiler_pic='-KPIC' - lt_prog_compiler_static='-Bstatic' - ;; - - *nto* | *qnx*) - # QNX uses GNU C++, but need to define -shared option too, otherwise - # it will coredump. - lt_prog_compiler_pic='-fPIC -shared' - ;; - - osf3* | osf4* | osf5*) - lt_prog_compiler_wl='-Wl,' - # All OSF/1 code is PIC. - lt_prog_compiler_static='-non_shared' - ;; - - rdos*) - lt_prog_compiler_static='-non_shared' - ;; - - solaris*) - lt_prog_compiler_pic='-KPIC' - lt_prog_compiler_static='-Bstatic' - case $cc_basename in - f77* | f90* | f95* | sunf77* | sunf90* | sunf95*) - lt_prog_compiler_wl='-Qoption ld ';; - *) - lt_prog_compiler_wl='-Wl,';; - esac - ;; - - sunos4*) - lt_prog_compiler_wl='-Qoption ld ' - lt_prog_compiler_pic='-PIC' - lt_prog_compiler_static='-Bstatic' - ;; - - sysv4 | sysv4.2uw2* | sysv4.3*) - lt_prog_compiler_wl='-Wl,' - lt_prog_compiler_pic='-KPIC' - lt_prog_compiler_static='-Bstatic' - ;; - - sysv4*MP*) - if test -d /usr/nec ;then - lt_prog_compiler_pic='-Kconform_pic' - lt_prog_compiler_static='-Bstatic' - fi - ;; - - sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) - lt_prog_compiler_wl='-Wl,' - lt_prog_compiler_pic='-KPIC' - lt_prog_compiler_static='-Bstatic' - ;; - - unicos*) - lt_prog_compiler_wl='-Wl,' - lt_prog_compiler_can_build_shared=no - ;; - - uts4*) - lt_prog_compiler_pic='-pic' - lt_prog_compiler_static='-Bstatic' - ;; - - *) - lt_prog_compiler_can_build_shared=no - ;; - esac - fi - -case $host_os in - # For platforms which do not support PIC, -DPIC is meaningless: - *djgpp*) - lt_prog_compiler_pic= - ;; - *) - lt_prog_compiler_pic="$lt_prog_compiler_pic@&t@ -DPIC" - ;; -esac - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $compiler option to produce PIC" >&5 -$as_echo_n "checking for $compiler option to produce PIC... " >&6; } -if ${lt_cv_prog_compiler_pic+:} false; then : - $as_echo_n "(cached) " >&6 -else - lt_cv_prog_compiler_pic=$lt_prog_compiler_pic -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic" >&5 -$as_echo "$lt_cv_prog_compiler_pic" >&6; } -lt_prog_compiler_pic=$lt_cv_prog_compiler_pic - -# -# Check to make sure the PIC flag actually works. -# -if test -n "$lt_prog_compiler_pic"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler PIC flag $lt_prog_compiler_pic works" >&5 -$as_echo_n "checking if $compiler PIC flag $lt_prog_compiler_pic works... " >&6; } -if ${lt_cv_prog_compiler_pic_works+:} false; then : - $as_echo_n "(cached) " >&6 -else - lt_cv_prog_compiler_pic_works=no - ac_outfile=conftest.$ac_objext - echo "$lt_simple_compile_test_code" > conftest.$ac_ext - lt_compiler_flag="$lt_prog_compiler_pic@&t@ -DPIC" - # Insert the option either (1) after the last *FLAGS variable, or - # (2) before a word containing "conftest.", or (3) at the end. - # Note that $ac_compile itself does not contain backslashes and begins - # with a dollar sign (not a hyphen), so the echo should work correctly. - # The option is referenced via a variable to avoid confusing sed. - lt_compile=`echo "$ac_compile" | $SED \ - -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ - -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ - -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5) - (eval "$lt_compile" 2>conftest.err) - ac_status=$? - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - if (exit $ac_status) && test -s "$ac_outfile"; then - # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings other than the usual output. - $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp - $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 - if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then - lt_cv_prog_compiler_pic_works=yes - fi - fi - $RM conftest* - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic_works" >&5 -$as_echo "$lt_cv_prog_compiler_pic_works" >&6; } - -if test x"$lt_cv_prog_compiler_pic_works" = xyes; then - case $lt_prog_compiler_pic in - "" | " "*) ;; - *) lt_prog_compiler_pic=" $lt_prog_compiler_pic" ;; - esac -else - lt_prog_compiler_pic= - lt_prog_compiler_can_build_shared=no -fi - -fi - - - - - - - - - - - -# -# Check to make sure the static flag actually works. -# -wl=$lt_prog_compiler_wl eval lt_tmp_static_flag=\"$lt_prog_compiler_static\" -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler static flag $lt_tmp_static_flag works" >&5 -$as_echo_n "checking if $compiler static flag $lt_tmp_static_flag works... " >&6; } -if ${lt_cv_prog_compiler_static_works+:} false; then : - $as_echo_n "(cached) " >&6 -else - lt_cv_prog_compiler_static_works=no - save_LDFLAGS="$LDFLAGS" - LDFLAGS="$LDFLAGS $lt_tmp_static_flag" - echo "$lt_simple_link_test_code" > conftest.$ac_ext - if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then - # The linker can only warn and ignore the option if not recognized - # So say no if there are warnings - if test -s conftest.err; then - # Append any errors to the config.log. - cat conftest.err 1>&5 - $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp - $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 - if diff conftest.exp conftest.er2 >/dev/null; then - lt_cv_prog_compiler_static_works=yes - fi - else - lt_cv_prog_compiler_static_works=yes - fi - fi - $RM -r conftest* - LDFLAGS="$save_LDFLAGS" - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_static_works" >&5 -$as_echo "$lt_cv_prog_compiler_static_works" >&6; } - -if test x"$lt_cv_prog_compiler_static_works" = xyes; then - : -else - lt_prog_compiler_static= -fi - - - - - - - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5 -$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; } -if ${lt_cv_prog_compiler_c_o+:} false; then : - $as_echo_n "(cached) " >&6 -else - lt_cv_prog_compiler_c_o=no - $RM -r conftest 2>/dev/null - mkdir conftest - cd conftest - mkdir out - echo "$lt_simple_compile_test_code" > conftest.$ac_ext - - lt_compiler_flag="-o out/conftest2.$ac_objext" - # Insert the option either (1) after the last *FLAGS variable, or - # (2) before a word containing "conftest.", or (3) at the end. - # Note that $ac_compile itself does not contain backslashes and begins - # with a dollar sign (not a hyphen), so the echo should work correctly. - lt_compile=`echo "$ac_compile" | $SED \ - -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ - -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ - -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5) - (eval "$lt_compile" 2>out/conftest.err) - ac_status=$? - cat out/conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - if (exit $ac_status) && test -s out/conftest2.$ac_objext - then - # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings - $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp - $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 - if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then - lt_cv_prog_compiler_c_o=yes - fi - fi - chmod u+w . 2>&5 - $RM conftest* - # SGI C++ compiler will create directory out/ii_files/ for - # template instantiation - test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files - $RM out/* && rmdir out - cd .. - $RM -r conftest - $RM conftest* - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o" >&5 -$as_echo "$lt_cv_prog_compiler_c_o" >&6; } - - - - - - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5 -$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; } -if ${lt_cv_prog_compiler_c_o+:} false; then : - $as_echo_n "(cached) " >&6 -else - lt_cv_prog_compiler_c_o=no - $RM -r conftest 2>/dev/null - mkdir conftest - cd conftest - mkdir out - echo "$lt_simple_compile_test_code" > conftest.$ac_ext - - lt_compiler_flag="-o out/conftest2.$ac_objext" - # Insert the option either (1) after the last *FLAGS variable, or - # (2) before a word containing "conftest.", or (3) at the end. - # Note that $ac_compile itself does not contain backslashes and begins - # with a dollar sign (not a hyphen), so the echo should work correctly. - lt_compile=`echo "$ac_compile" | $SED \ - -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ - -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ - -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5) - (eval "$lt_compile" 2>out/conftest.err) - ac_status=$? - cat out/conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - if (exit $ac_status) && test -s out/conftest2.$ac_objext - then - # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings - $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp - $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 - if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then - lt_cv_prog_compiler_c_o=yes - fi - fi - chmod u+w . 2>&5 - $RM conftest* - # SGI C++ compiler will create directory out/ii_files/ for - # template instantiation - test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files - $RM out/* && rmdir out - cd .. - $RM -r conftest - $RM conftest* - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o" >&5 -$as_echo "$lt_cv_prog_compiler_c_o" >&6; } - - - - -hard_links="nottested" -if test "$lt_cv_prog_compiler_c_o" = no && test "$need_locks" != no; then - # do not overwrite the value of need_locks provided by the user - { $as_echo "$as_me:${as_lineno-$LINENO}: checking if we can lock with hard links" >&5 -$as_echo_n "checking if we can lock with hard links... " >&6; } - hard_links=yes - $RM conftest* - ln conftest.a conftest.b 2>/dev/null && hard_links=no - touch conftest.a - ln conftest.a conftest.b 2>&5 || hard_links=no - ln conftest.a conftest.b 2>/dev/null && hard_links=no - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $hard_links" >&5 -$as_echo "$hard_links" >&6; } - if test "$hard_links" = no; then - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5 -$as_echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;} - need_locks=warn - fi -else - need_locks=no -fi - - - - - - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $compiler linker ($LD) supports shared libraries" >&5 -$as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; } - - runpath_var= - allow_undefined_flag= - always_export_symbols=no - archive_cmds= - archive_expsym_cmds= - compiler_needs_object=no - enable_shared_with_static_runtimes=no - export_dynamic_flag_spec= - export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' - hardcode_automatic=no - hardcode_direct=no - hardcode_direct_absolute=no - hardcode_libdir_flag_spec= - hardcode_libdir_flag_spec_ld= - hardcode_libdir_separator= - hardcode_minus_L=no - hardcode_shlibpath_var=unsupported - inherit_rpath=no - link_all_deplibs=unknown - module_cmds= - module_expsym_cmds= - old_archive_from_new_cmds= - old_archive_from_expsyms_cmds= - thread_safe_flag_spec= - whole_archive_flag_spec= - # include_expsyms should be a list of space-separated symbols to be *always* - # included in the symbol list - include_expsyms= - # exclude_expsyms can be an extended regexp of symbols to exclude - # it will be wrapped by ` (' and `)$', so one must not match beginning or - # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc', - # as well as any symbol that contains `d'. - exclude_expsyms='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*' - # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out - # platforms (ab)use it in PIC code, but their linkers get confused if - # the symbol is explicitly referenced. Since portable code cannot - # rely on this symbol name, it's probably fine to never include it in - # preloaded symbol tables. - # Exclude shared library initialization/finalization symbols. - extract_expsyms_cmds= - - case $host_os in - cygwin* | mingw* | pw32* | cegcc*) - # FIXME: the MSVC++ port hasn't been tested in a loooong time - # When not using gcc, we currently assume that we are using - # Microsoft Visual C++. - if test "$GCC" != yes; then - with_gnu_ld=no - fi - ;; - interix*) - # we just hope/assume this is gcc and not c89 (= MSVC++) - with_gnu_ld=yes - ;; - openbsd*) - with_gnu_ld=no - ;; - linux* | k*bsd*-gnu | gnu*) - link_all_deplibs=no - ;; - esac - - ld_shlibs=yes - - # On some targets, GNU ld is compatible enough with the native linker - # that we're better off using the native interface for both. - lt_use_gnu_ld_interface=no - if test "$with_gnu_ld" = yes; then - case $host_os in - aix*) - # The AIX port of GNU ld has always aspired to compatibility - # with the native linker. However, as the warning in the GNU ld - # block says, versions before 2.19.5* couldn't really create working - # shared libraries, regardless of the interface used. - case `$LD -v 2>&1` in - *\ \(GNU\ Binutils\)\ 2.19.5*) ;; - *\ \(GNU\ Binutils\)\ 2.[2-9]*) ;; - *\ \(GNU\ Binutils\)\ [3-9]*) ;; - *) - lt_use_gnu_ld_interface=yes - ;; - esac - ;; - *) - lt_use_gnu_ld_interface=yes - ;; - esac - fi - - if test "$lt_use_gnu_ld_interface" = yes; then - # If archive_cmds runs LD, not CC, wlarc should be empty - wlarc='${wl}' - - # Set some defaults for GNU ld with shared library support. These - # are reset later if shared libraries are not supported. Putting them - # here allows them to be overridden if necessary. - runpath_var=LD_RUN_PATH - hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' - export_dynamic_flag_spec='${wl}--export-dynamic' - # ancient GNU ld didn't support --whole-archive et. al. - if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then - whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' - else - whole_archive_flag_spec= - fi - supports_anon_versioning=no - case `$LD -v 2>&1` in - *GNU\ gold*) supports_anon_versioning=yes ;; - *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11 - *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... - *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ... - *\ 2.11.*) ;; # other 2.11 versions - *) supports_anon_versioning=yes ;; - esac - - # See if GNU ld supports shared libraries. - case $host_os in - aix[3-9]*) - # On AIX/PPC, the GNU linker is very broken - if test "$host_cpu" != ia64; then - ld_shlibs=no - cat <<_LT_EOF 1>&2 - -*** Warning: the GNU linker, at least up to release 2.19, is reported -*** to be unable to reliably create shared libraries on AIX. -*** Therefore, libtool is disabling shared libraries support. If you -*** really care for shared libraries, you may want to install binutils -*** 2.20 or above, or modify your PATH so that a non-GNU linker is found. -*** You will then need to restart the configuration process. - -_LT_EOF - fi - ;; - - amigaos*) - case $host_cpu in - powerpc) - # see comment about AmigaOS4 .so support - archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - archive_expsym_cmds='' - ;; - m68k) - archive_cmds='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' - hardcode_libdir_flag_spec='-L$libdir' - hardcode_minus_L=yes - ;; - esac - ;; - - beos*) - if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then - allow_undefined_flag=unsupported - # Joseph Beckenbach says some releases of gcc - # support --undefined. This deserves some investigation. FIXME - archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - else - ld_shlibs=no - fi - ;; - - cygwin* | mingw* | pw32* | cegcc*) - # _LT_TAGVAR(hardcode_libdir_flag_spec, ) is actually meaningless, - # as there is no search path for DLLs. - hardcode_libdir_flag_spec='-L$libdir' - export_dynamic_flag_spec='${wl}--export-all-symbols' - allow_undefined_flag=unsupported - always_export_symbols=no - enable_shared_with_static_runtimes=yes - export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/;s/^.*[ ]__nm__\([^ ]*\)[ ][^ ]*/\1 DATA/;/^I[ ]/d;/^[AITW][ ]/s/.* //'\'' | sort | uniq > $export_symbols' - exclude_expsyms='[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname' - - if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then - archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' - # If the export-symbols file already is a .def file (1st line - # is EXPORTS), use it as is; otherwise, prepend... - archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then - cp $export_symbols $output_objdir/$soname.def; - else - echo EXPORTS > $output_objdir/$soname.def; - cat $export_symbols >> $output_objdir/$soname.def; - fi~ - $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' - else - ld_shlibs=no - fi - ;; - - haiku*) - archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - link_all_deplibs=yes - ;; - - interix[3-9]*) - hardcode_direct=no - hardcode_shlibpath_var=no - hardcode_libdir_flag_spec='${wl}-rpath,$libdir' - export_dynamic_flag_spec='${wl}-E' - # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. - # Instead, shared libraries are loaded at an image base (0x10000000 by - # default) and relocated if they conflict, which is a slow very memory - # consuming and fragmenting process. To avoid this, we pick a random, - # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link - # time. Moving up from 0x10000000 also allows more sbrk(2) space. - archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' - archive_expsym_cmds='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' - ;; - - gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu) - tmp_diet=no - if test "$host_os" = linux-dietlibc; then - case $cc_basename in - diet\ *) tmp_diet=yes;; # linux-dietlibc with static linking (!diet-dyn) - esac - fi - if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \ - && test "$tmp_diet" = no - then - tmp_addflag=' $pic_flag' - tmp_sharedflag='-shared' - case $cc_basename,$host_cpu in - pgcc*) # Portland Group C compiler - whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' - tmp_addflag=' $pic_flag' - ;; - pgf77* | pgf90* | pgf95* | pgfortran*) - # Portland Group f77 and f90 compilers - whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' - tmp_addflag=' $pic_flag -Mnomain' ;; - ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64 - tmp_addflag=' -i_dynamic' ;; - efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64 - tmp_addflag=' -i_dynamic -nofor_main' ;; - ifc* | ifort*) # Intel Fortran compiler - tmp_addflag=' -nofor_main' ;; - lf95*) # Lahey Fortran 8.1 - whole_archive_flag_spec= - tmp_sharedflag='--shared' ;; - xl[cC]* | bgxl[cC]* | mpixl[cC]*) # IBM XL C 8.0 on PPC (deal with xlf below) - tmp_sharedflag='-qmkshrobj' - tmp_addflag= ;; - nvcc*) # Cuda Compiler Driver 2.2 - whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' - compiler_needs_object=yes - ;; - esac - case `$CC -V 2>&1 | sed 5q` in - *Sun\ C*) # Sun C 5.9 - whole_archive_flag_spec='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' - compiler_needs_object=yes - tmp_sharedflag='-G' ;; - *Sun\ F*) # Sun Fortran 8.3 - tmp_sharedflag='-G' ;; - esac - archive_cmds='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - - if test "x$supports_anon_versioning" = xyes; then - archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~ - cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ - echo "local: *; };" >> $output_objdir/$libname.ver~ - $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' - fi - - case $cc_basename in - xlf* | bgf* | bgxlf* | mpixlf*) - # IBM XL Fortran 10.1 on PPC cannot create shared libs itself - whole_archive_flag_spec='--whole-archive$convenience --no-whole-archive' - hardcode_libdir_flag_spec= - hardcode_libdir_flag_spec_ld='-rpath $libdir' - archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname -o $lib' - if test "x$supports_anon_versioning" = xyes; then - archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~ - cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ - echo "local: *; };" >> $output_objdir/$libname.ver~ - $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib' - fi - ;; - esac - else - ld_shlibs=no - fi - ;; - - netbsd* | netbsdelf*-gnu) - if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then - archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' - wlarc= - else - archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - fi - ;; - - solaris*) - if $LD -v 2>&1 | $GREP 'BFD 2\.8' > /dev/null; then - ld_shlibs=no - cat <<_LT_EOF 1>&2 - -*** Warning: The releases 2.8.* of the GNU linker cannot reliably -*** create shared libraries on Solaris systems. Therefore, libtool -*** is disabling shared libraries support. We urge you to upgrade GNU -*** binutils to release 2.9.1 or newer. Another option is to modify -*** your PATH or compiler configuration so that the native linker is -*** used, and then restart. - -_LT_EOF - elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then - archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - else - ld_shlibs=no - fi - ;; - - sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*) - case `$LD -v 2>&1` in - *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*) - ld_shlibs=no - cat <<_LT_EOF 1>&2 - -*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not -*** reliably create shared libraries on SCO systems. Therefore, libtool -*** is disabling shared libraries support. We urge you to upgrade GNU -*** binutils to release 2.16.91.0.3 or newer. Another option is to modify -*** your PATH or compiler configuration so that the native linker is -*** used, and then restart. - -_LT_EOF - ;; - *) - # For security reasons, it is highly recommended that you always - # use absolute paths for naming shared libraries, and exclude the - # DT_RUNPATH tag from executables and libraries. But doing so - # requires that you compile everything twice, which is a pain. - if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then - hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' - archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - else - ld_shlibs=no - fi - ;; - esac - ;; - - sunos4*) - archive_cmds='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' - wlarc= - hardcode_direct=yes - hardcode_shlibpath_var=no - ;; - - *) - if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then - archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - else - ld_shlibs=no - fi - ;; - esac - - if test "$ld_shlibs" = no; then - runpath_var= - hardcode_libdir_flag_spec= - export_dynamic_flag_spec= - whole_archive_flag_spec= - fi - else - # PORTME fill in a description of your system's linker (not GNU ld) - case $host_os in - aix3*) - allow_undefined_flag=unsupported - always_export_symbols=yes - archive_expsym_cmds='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname' - # Note: this linker hardcodes the directories in LIBPATH if there - # are no directories specified by -L. - hardcode_minus_L=yes - if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then - # Neither direct hardcoding nor static linking is supported with a - # broken collect2. - hardcode_direct=unsupported - fi - ;; - - aix[4-9]*) - if test "$host_cpu" = ia64; then - # On IA64, the linker does run time linking by default, so we don't - # have to do anything special. - aix_use_runtimelinking=no - exp_sym_flag='-Bexport' - no_entry_flag="" - else - # If we're using GNU nm, then we don't want the "-C" option. - # -C means demangle to AIX nm, but means don't demangle with GNU nm - # Also, AIX nm treats weak defined symbols like other global - # defined symbols, whereas GNU nm marks them as "W". - if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then - export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' - else - export_symbols_cmds='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' - fi - aix_use_runtimelinking=no - - # Test if we are trying to use run time linking or normal - # AIX style linking. If -brtl is somewhere in LDFLAGS, we - # need to do runtime linking. - case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*) - for ld_flag in $LDFLAGS; do - if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then - aix_use_runtimelinking=yes - break - fi - done - ;; - esac - - exp_sym_flag='-bexport' - no_entry_flag='-bnoentry' - fi - - # When large executables or shared objects are built, AIX ld can - # have problems creating the table of contents. If linking a library - # or program results in "error TOC overflow" add -mminimal-toc to - # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not - # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. - - archive_cmds='' - hardcode_direct=yes - hardcode_direct_absolute=yes - hardcode_libdir_separator=':' - link_all_deplibs=yes - file_list_spec='${wl}-f,' - - if test "$GCC" = yes; then - case $host_os in aix4.[012]|aix4.[012].*) - # We only want to do this on AIX 4.2 and lower, the check - # below for broken collect2 doesn't work under 4.3+ - collect2name=`${CC} -print-prog-name=collect2` - if test -f "$collect2name" && - strings "$collect2name" | $GREP resolve_lib_name >/dev/null - then - # We have reworked collect2 - : - else - # We have old collect2 - hardcode_direct=unsupported - # It fails to find uninstalled libraries when the uninstalled - # path is not listed in the libpath. Setting hardcode_minus_L - # to unsupported forces relinking - hardcode_minus_L=yes - hardcode_libdir_flag_spec='-L$libdir' - hardcode_libdir_separator= - fi - ;; - esac - shared_flag='-shared' - if test "$aix_use_runtimelinking" = yes; then - shared_flag="$shared_flag "'${wl}-G' - fi - link_all_deplibs=no - else - # not using gcc - if test "$host_cpu" = ia64; then - # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release - # chokes on -Wl,-G. The following line is correct: - shared_flag='-G' - else - if test "$aix_use_runtimelinking" = yes; then - shared_flag='${wl}-G' - else - shared_flag='${wl}-bM:SRE' - fi - fi - fi - - export_dynamic_flag_spec='${wl}-bexpall' - # It seems that -bexpall does not export symbols beginning with - # underscore (_), so it is better to generate a list of symbols to export. - always_export_symbols=yes - if test "$aix_use_runtimelinking" = yes; then - # Warning - without using the other runtime loading flags (-brtl), - # -berok will link without error, but may produce a broken library. - allow_undefined_flag='-berok' - # Determine the default libpath from the value encoded in an - # empty executable. - if test "${lt_cv_aix_libpath+set}" = set; then - aix_libpath=$lt_cv_aix_libpath -else - if ${lt_cv_aix_libpath_+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - - lt_aix_libpath_sed=' - /Import File Strings/,/^$/ { - /^0/ { - s/^0 *\([^ ]*\) *$/\1/ - p - } - }' - lt_cv_aix_libpath_=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` - # Check for a 64-bit object if we didn't find anything. - if test -z "$lt_cv_aix_libpath_"; then - lt_cv_aix_libpath_=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` - fi -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext - if test -z "$lt_cv_aix_libpath_"; then - lt_cv_aix_libpath_="/usr/lib:/lib" - fi - -fi - - aix_libpath=$lt_cv_aix_libpath_ -fi - - hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath" - archive_expsym_cmds='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" - else - if test "$host_cpu" = ia64; then - hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib' - allow_undefined_flag="-z nodefs" - archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" - else - # Determine the default libpath from the value encoded in an - # empty executable. - if test "${lt_cv_aix_libpath+set}" = set; then - aix_libpath=$lt_cv_aix_libpath -else - if ${lt_cv_aix_libpath_+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - - lt_aix_libpath_sed=' - /Import File Strings/,/^$/ { - /^0/ { - s/^0 *\([^ ]*\) *$/\1/ - p - } - }' - lt_cv_aix_libpath_=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` - # Check for a 64-bit object if we didn't find anything. - if test -z "$lt_cv_aix_libpath_"; then - lt_cv_aix_libpath_=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` - fi -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext - if test -z "$lt_cv_aix_libpath_"; then - lt_cv_aix_libpath_="/usr/lib:/lib" - fi - -fi - - aix_libpath=$lt_cv_aix_libpath_ -fi - - hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath" - # Warning - without using the other run time loading flags, - # -berok will link without error, but may produce a broken library. - no_undefined_flag=' ${wl}-bernotok' - allow_undefined_flag=' ${wl}-berok' - if test "$with_gnu_ld" = yes; then - # We only use this code for GNU lds that support --whole-archive. - whole_archive_flag_spec='${wl}--whole-archive$convenience ${wl}--no-whole-archive' - else - # Exported symbols can be pulled into shared objects from archives - whole_archive_flag_spec='$convenience' - fi - archive_cmds_need_lc=yes - # This is similar to how AIX traditionally builds its shared libraries. - archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' - fi - fi - ;; - - amigaos*) - case $host_cpu in - powerpc) - # see comment about AmigaOS4 .so support - archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - archive_expsym_cmds='' - ;; - m68k) - archive_cmds='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' - hardcode_libdir_flag_spec='-L$libdir' - hardcode_minus_L=yes - ;; - esac - ;; - - bsdi[45]*) - export_dynamic_flag_spec=-rdynamic - ;; - - cygwin* | mingw* | pw32* | cegcc*) - # When not using gcc, we currently assume that we are using - # Microsoft Visual C++. - # hardcode_libdir_flag_spec is actually meaningless, as there is - # no search path for DLLs. - case $cc_basename in - cl*) - # Native MSVC - hardcode_libdir_flag_spec=' ' - allow_undefined_flag=unsupported - always_export_symbols=yes - file_list_spec='@' - # Tell ltmain to make .lib files, not .a files. - libext=lib - # Tell ltmain to make .dll files, not .so files. - shrext_cmds=".dll" - # FIXME: Setting linknames here is a bad hack. - archive_cmds='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames=' - archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then - sed -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp; - else - sed -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp; - fi~ - $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~ - linknames=' - # The linker will not automatically build a static lib if we build a DLL. - # _LT_TAGVAR(old_archive_from_new_cmds, )='true' - enable_shared_with_static_runtimes=yes - export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1,DATA/'\'' | $SED -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols' - # Don't use ranlib - old_postinstall_cmds='chmod 644 $oldlib' - postlink_cmds='lt_outputfile="@OUTPUT@"~ - lt_tool_outputfile="@TOOL_OUTPUT@"~ - case $lt_outputfile in - *.exe|*.EXE) ;; - *) - lt_outputfile="$lt_outputfile.exe" - lt_tool_outputfile="$lt_tool_outputfile.exe" - ;; - esac~ - if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then - $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1; - $RM "$lt_outputfile.manifest"; - fi' - ;; - *) - # Assume MSVC wrapper - hardcode_libdir_flag_spec=' ' - allow_undefined_flag=unsupported - # Tell ltmain to make .lib files, not .a files. - libext=lib - # Tell ltmain to make .dll files, not .so files. - shrext_cmds=".dll" - # FIXME: Setting linknames here is a bad hack. - archive_cmds='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames=' - # The linker will automatically build a .lib file if we build a DLL. - old_archive_from_new_cmds='true' - # FIXME: Should let the user specify the lib program. - old_archive_cmds='lib -OUT:$oldlib$oldobjs$old_deplibs' - enable_shared_with_static_runtimes=yes - ;; - esac - ;; - - darwin* | rhapsody*) - - - archive_cmds_need_lc=no - hardcode_direct=no - hardcode_automatic=yes - hardcode_shlibpath_var=unsupported - if test "$lt_cv_ld_force_load" = "yes"; then - whole_archive_flag_spec='`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience ${wl}-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`' - else - whole_archive_flag_spec='' - fi - link_all_deplibs=yes - allow_undefined_flag="$_lt_dar_allow_undefined" - case $cc_basename in - ifort*) _lt_dar_can_shared=yes ;; - *) _lt_dar_can_shared=$GCC ;; - esac - if test "$_lt_dar_can_shared" = "yes"; then - output_verbose_link_cmd=func_echo_all - archive_cmds="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}" - module_cmds="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}" - archive_expsym_cmds="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}" - module_expsym_cmds="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}" - - else - ld_shlibs=no - fi - - ;; - - dgux*) - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_libdir_flag_spec='-L$libdir' - hardcode_shlibpath_var=no - ;; - - freebsd1*) - ld_shlibs=no - ;; - - # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor - # support. Future versions do this automatically, but an explicit c++rt0.o - # does not break anything, and helps significantly (at the cost of a little - # extra space). - freebsd2.2*) - archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o' - hardcode_libdir_flag_spec='-R$libdir' - hardcode_direct=yes - hardcode_shlibpath_var=no - ;; - - # Unfortunately, older versions of FreeBSD 2 do not have this feature. - freebsd2*) - archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' - hardcode_direct=yes - hardcode_minus_L=yes - hardcode_shlibpath_var=no - ;; - - # FreeBSD 3 and greater uses gcc -shared to do shared libraries. - freebsd* | dragonfly*) - archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' - hardcode_libdir_flag_spec='-R$libdir' - hardcode_direct=yes - hardcode_shlibpath_var=no - ;; - - hpux9*) - if test "$GCC" = yes; then - archive_cmds='$RM $output_objdir/$soname~$CC -shared $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' - else - archive_cmds='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' - fi - hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' - hardcode_libdir_separator=: - hardcode_direct=yes - - # hardcode_minus_L: Not really in the search PATH, - # but as the default location of the library. - hardcode_minus_L=yes - export_dynamic_flag_spec='${wl}-E' - ;; - - hpux10*) - if test "$GCC" = yes && test "$with_gnu_ld" = no; then - archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' - else - archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' - fi - if test "$with_gnu_ld" = no; then - hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' - hardcode_libdir_flag_spec_ld='+b $libdir' - hardcode_libdir_separator=: - hardcode_direct=yes - hardcode_direct_absolute=yes - export_dynamic_flag_spec='${wl}-E' - # hardcode_minus_L: Not really in the search PATH, - # but as the default location of the library. - hardcode_minus_L=yes - fi - ;; - - hpux11*) - if test "$GCC" = yes && test "$with_gnu_ld" = no; then - case $host_cpu in - hppa*64*) - archive_cmds='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' - ;; - ia64*) - archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' - ;; - *) - archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' - ;; - esac - else - case $host_cpu in - hppa*64*) - archive_cmds='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' - ;; - ia64*) - archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' - ;; - *) - - # Older versions of the 11.00 compiler do not understand -b yet - # (HP92453-01 A.11.01.20 doesn't, HP92453-01 B.11.X.35175-35176.GP does) - { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC understands -b" >&5 -$as_echo_n "checking if $CC understands -b... " >&6; } -if ${lt_cv_prog_compiler__b+:} false; then : - $as_echo_n "(cached) " >&6 -else - lt_cv_prog_compiler__b=no - save_LDFLAGS="$LDFLAGS" - LDFLAGS="$LDFLAGS -b" - echo "$lt_simple_link_test_code" > conftest.$ac_ext - if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then - # The linker can only warn and ignore the option if not recognized - # So say no if there are warnings - if test -s conftest.err; then - # Append any errors to the config.log. - cat conftest.err 1>&5 - $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp - $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 - if diff conftest.exp conftest.er2 >/dev/null; then - lt_cv_prog_compiler__b=yes - fi - else - lt_cv_prog_compiler__b=yes - fi - fi - $RM -r conftest* - LDFLAGS="$save_LDFLAGS" - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler__b" >&5 -$as_echo "$lt_cv_prog_compiler__b" >&6; } - -if test x"$lt_cv_prog_compiler__b" = xyes; then - archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' -else - archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' -fi - - ;; - esac - fi - if test "$with_gnu_ld" = no; then - hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' - hardcode_libdir_separator=: - - case $host_cpu in - hppa*64*|ia64*) - hardcode_direct=no - hardcode_shlibpath_var=no - ;; - *) - hardcode_direct=yes - hardcode_direct_absolute=yes - export_dynamic_flag_spec='${wl}-E' - - # hardcode_minus_L: Not really in the search PATH, - # but as the default location of the library. - hardcode_minus_L=yes - ;; - esac - fi - ;; - - irix5* | irix6* | nonstopux*) - if test "$GCC" = yes; then - archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' - # Try to use the -exported_symbol ld option, if it does not - # work, assume that -exports_file does not work either and - # implicitly export all symbols. - # This should be the same for all languages, so no per-tag cache variable. - { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $host_os linker accepts -exported_symbol" >&5 -$as_echo_n "checking whether the $host_os linker accepts -exported_symbol... " >&6; } -if ${lt_cv_irix_exported_symbol+:} false; then : - $as_echo_n "(cached) " >&6 -else - save_LDFLAGS="$LDFLAGS" - LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -int foo (void) { return 0; } -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - lt_cv_irix_exported_symbol=yes -else - lt_cv_irix_exported_symbol=no -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext - LDFLAGS="$save_LDFLAGS" -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_irix_exported_symbol" >&5 -$as_echo "$lt_cv_irix_exported_symbol" >&6; } - if test "$lt_cv_irix_exported_symbol" = yes; then - archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib' - fi - else - archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' - archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib' - fi - archive_cmds_need_lc='no' - hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' - hardcode_libdir_separator=: - inherit_rpath=yes - link_all_deplibs=yes - ;; - - netbsd* | netbsdelf*-gnu) - if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then - archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out - else - archive_cmds='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF - fi - hardcode_libdir_flag_spec='-R$libdir' - hardcode_direct=yes - hardcode_shlibpath_var=no - ;; - - newsos6) - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_direct=yes - hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' - hardcode_libdir_separator=: - hardcode_shlibpath_var=no - ;; - - *nto* | *qnx*) - ;; - - openbsd*) - if test -f /usr/libexec/ld.so; then - hardcode_direct=yes - hardcode_shlibpath_var=no - hardcode_direct_absolute=yes - if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then - archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' - archive_expsym_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols' - hardcode_libdir_flag_spec='${wl}-rpath,$libdir' - export_dynamic_flag_spec='${wl}-E' - else - case $host_os in - openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*) - archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' - hardcode_libdir_flag_spec='-R$libdir' - ;; - *) - archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' - hardcode_libdir_flag_spec='${wl}-rpath,$libdir' - ;; - esac - fi - else - ld_shlibs=no - fi - ;; - - os2*) - hardcode_libdir_flag_spec='-L$libdir' - hardcode_minus_L=yes - allow_undefined_flag=unsupported - archive_cmds='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~echo DATA >> $output_objdir/$libname.def~echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' - old_archive_from_new_cmds='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def' - ;; - - osf3*) - if test "$GCC" = yes; then - allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*' - archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' - else - allow_undefined_flag=' -expect_unresolved \*' - archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' - fi - archive_cmds_need_lc='no' - hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' - hardcode_libdir_separator=: - ;; - - osf4* | osf5*) # as osf3* with the addition of -msym flag - if test "$GCC" = yes; then - allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*' - archive_cmds='$CC -shared${allow_undefined_flag} $pic_flag $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' - hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' - else - allow_undefined_flag=' -expect_unresolved \*' - archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' - archive_expsym_cmds='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~ - $CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp' - - # Both c and cxx compiler support -rpath directly - hardcode_libdir_flag_spec='-rpath $libdir' - fi - archive_cmds_need_lc='no' - hardcode_libdir_separator=: - ;; - - solaris*) - no_undefined_flag=' -z defs' - if test "$GCC" = yes; then - wlarc='${wl}' - archive_cmds='$CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' - archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ - $CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' - else - case `$CC -V 2>&1` in - *"Compilers 5.0"*) - wlarc='' - archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' - archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ - $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp' - ;; - *) - wlarc='${wl}' - archive_cmds='$CC -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $compiler_flags' - archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ - $CC -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' - ;; - esac - fi - hardcode_libdir_flag_spec='-R$libdir' - hardcode_shlibpath_var=no - case $host_os in - solaris2.[0-5] | solaris2.[0-5].*) ;; - *) - # The compiler driver will combine and reorder linker options, - # but understands `-z linker_flag'. GCC discards it without `$wl', - # but is careful enough not to reorder. - # Supported since Solaris 2.6 (maybe 2.5.1?) - if test "$GCC" = yes; then - whole_archive_flag_spec='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' - else - whole_archive_flag_spec='-z allextract$convenience -z defaultextract' - fi - ;; - esac - link_all_deplibs=yes - ;; - - sunos4*) - if test "x$host_vendor" = xsequent; then - # Use $CC to link under sequent, because it throws in some extra .o - # files that make .init and .fini sections work. - archive_cmds='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags' - else - archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' - fi - hardcode_libdir_flag_spec='-L$libdir' - hardcode_direct=yes - hardcode_minus_L=yes - hardcode_shlibpath_var=no - ;; - - sysv4) - case $host_vendor in - sni) - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_direct=yes # is this really true??? - ;; - siemens) - ## LD is ld it makes a PLAMLIB - ## CC just makes a GrossModule. - archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags' - reload_cmds='$CC -r -o $output$reload_objs' - hardcode_direct=no - ;; - motorola) - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_direct=no #Motorola manual says yes, but my tests say they lie - ;; - esac - runpath_var='LD_RUN_PATH' - hardcode_shlibpath_var=no - ;; - - sysv4.3*) - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_shlibpath_var=no - export_dynamic_flag_spec='-Bexport' - ;; - - sysv4*MP*) - if test -d /usr/nec; then - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_shlibpath_var=no - runpath_var=LD_RUN_PATH - hardcode_runpath_var=yes - ld_shlibs=yes - fi - ;; - - sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*) - no_undefined_flag='${wl}-z,text' - archive_cmds_need_lc=no - hardcode_shlibpath_var=no - runpath_var='LD_RUN_PATH' - - if test "$GCC" = yes; then - archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - else - archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - fi - ;; - - sysv5* | sco3.2v5* | sco5v6*) - # Note: We can NOT use -z defs as we might desire, because we do not - # link with -lc, and that would cause any symbols used from libc to - # always be unresolved, which means just about no library would - # ever link correctly. If we're not using GNU ld we use -z text - # though, which does catch some bad symbols but isn't as heavy-handed - # as -z defs. - no_undefined_flag='${wl}-z,text' - allow_undefined_flag='${wl}-z,nodefs' - archive_cmds_need_lc=no - hardcode_shlibpath_var=no - hardcode_libdir_flag_spec='${wl}-R,$libdir' - hardcode_libdir_separator=':' - link_all_deplibs=yes - export_dynamic_flag_spec='${wl}-Bexport' - runpath_var='LD_RUN_PATH' - - if test "$GCC" = yes; then - archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - else - archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - fi - ;; - - uts4*) - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_libdir_flag_spec='-L$libdir' - hardcode_shlibpath_var=no - ;; - - *) - ld_shlibs=no - ;; - esac - - if test x$host_vendor = xsni; then - case $host in - sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) - export_dynamic_flag_spec='${wl}-Blargedynsym' - ;; - esac - fi - fi - -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ld_shlibs" >&5 -$as_echo "$ld_shlibs" >&6; } -test "$ld_shlibs" = no && can_build_shared=no - -with_gnu_ld=$with_gnu_ld - - - - - - - - - - - - - - - -# -# Do we need to explicitly link libc? -# -case "x$archive_cmds_need_lc" in -x|xyes) - # Assume -lc should be added - archive_cmds_need_lc=yes - - if test "$enable_shared" = yes && test "$GCC" = yes; then - case $archive_cmds in - *'~'*) - # FIXME: we may have to deal with multi-command sequences. - ;; - '$CC '*) - # Test whether the compiler implicitly links with -lc since on some - # systems, -lgcc has to come before -lc. If gcc already passes -lc - # to ld, don't add -lc before -lgcc. - { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether -lc should be explicitly linked in" >&5 -$as_echo_n "checking whether -lc should be explicitly linked in... " >&6; } -if ${lt_cv_archive_cmds_need_lc+:} false; then : - $as_echo_n "(cached) " >&6 -else - $RM conftest* - echo "$lt_simple_compile_test_code" > conftest.$ac_ext - - if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } 2>conftest.err; then - soname=conftest - lib=conftest - libobjs=conftest.$ac_objext - deplibs= - wl=$lt_prog_compiler_wl - pic_flag=$lt_prog_compiler_pic - compiler_flags=-v - linker_flags=-v - verstring= - output_objdir=. - libname=conftest - lt_save_allow_undefined_flag=$allow_undefined_flag - allow_undefined_flag= - if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1\""; } >&5 - (eval $archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } - then - lt_cv_archive_cmds_need_lc=no - else - lt_cv_archive_cmds_need_lc=yes - fi - allow_undefined_flag=$lt_save_allow_undefined_flag - else - cat conftest.err 1>&5 - fi - $RM conftest* - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_archive_cmds_need_lc" >&5 -$as_echo "$lt_cv_archive_cmds_need_lc" >&6; } - archive_cmds_need_lc=$lt_cv_archive_cmds_need_lc - ;; - esac - fi - ;; -esac - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking dynamic linker characteristics" >&5 -$as_echo_n "checking dynamic linker characteristics... " >&6; } - -if test "$GCC" = yes; then - case $host_os in - darwin*) lt_awk_arg="/^libraries:/,/LR/" ;; - *) lt_awk_arg="/^libraries:/" ;; - esac - case $host_os in - mingw* | cegcc*) lt_sed_strip_eq="s,=\([A-Za-z]:\),\1,g" ;; - *) lt_sed_strip_eq="s,=/,/,g" ;; - esac - lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e $lt_sed_strip_eq` - case $lt_search_path_spec in - *\;*) - # if the path contains ";" then we assume it to be the separator - # otherwise default to the standard path separator (i.e. ":") - it is - # assumed that no part of a normal pathname contains ";" but that should - # okay in the real world where ";" in dirpaths is itself problematic. - lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED 's/;/ /g'` - ;; - *) - lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED "s/$PATH_SEPARATOR/ /g"` - ;; - esac - # Ok, now we have the path, separated by spaces, we can step through it - # and add multilib dir if necessary. - lt_tmp_lt_search_path_spec= - lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null` - for lt_sys_path in $lt_search_path_spec; do - if test -d "$lt_sys_path/$lt_multi_os_dir"; then - lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir" - else - test -d "$lt_sys_path" && \ - lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path" - fi - done - lt_search_path_spec=`$ECHO "$lt_tmp_lt_search_path_spec" | awk ' -BEGIN {RS=" "; FS="/|\n";} { - lt_foo=""; - lt_count=0; - for (lt_i = NF; lt_i > 0; lt_i--) { - if ($lt_i != "" && $lt_i != ".") { - if ($lt_i == "..") { - lt_count++; - } else { - if (lt_count == 0) { - lt_foo="/" $lt_i lt_foo; - } else { - lt_count--; - } - } - } - } - if (lt_foo != "") { lt_freq[lt_foo]++; } - if (lt_freq[lt_foo] == 1) { print lt_foo; } -}'` - # AWK program above erroneously prepends '/' to C:/dos/paths - # for these hosts. - case $host_os in - mingw* | cegcc*) lt_search_path_spec=`$ECHO "$lt_search_path_spec" |\ - $SED 's,/\([A-Za-z]:\),\1,g'` ;; - esac - sys_lib_search_path_spec=`$ECHO "$lt_search_path_spec" | $lt_NL2SP` -else - sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" -fi -library_names_spec= -libname_spec='lib$name' -soname_spec= -shrext_cmds=".so" -postinstall_cmds= -postuninstall_cmds= -finish_cmds= -finish_eval= -shlibpath_var= -shlibpath_overrides_runpath=unknown -version_type=none -dynamic_linker="$host_os ld.so" -sys_lib_dlsearch_path_spec="/lib /usr/lib" -need_lib_prefix=unknown -hardcode_into_libs=no - -# when you set need_version to no, make sure it does not cause -set_version -# flags to be left without arguments -need_version=unknown - -case $host_os in -aix3*) - version_type=linux - library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a' - shlibpath_var=LIBPATH - - # AIX 3 has no versioning support, so we append a major version to the name. - soname_spec='${libname}${release}${shared_ext}$major' - ;; - -aix[4-9]*) - version_type=linux - need_lib_prefix=no - need_version=no - hardcode_into_libs=yes - if test "$host_cpu" = ia64; then - # AIX 5 supports IA64 - library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}' - shlibpath_var=LD_LIBRARY_PATH - else - # With GCC up to 2.95.x, collect2 would create an import file - # for dependence libraries. The import file would start with - # the line `#! .'. This would cause the generated library to - # depend on `.', always an invalid library. This was fixed in - # development snapshots of GCC prior to 3.0. - case $host_os in - aix4 | aix4.[01] | aix4.[01].*) - if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' - echo ' yes ' - echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then - : - else - can_build_shared=no - fi - ;; - esac - # AIX (on Power*) has no versioning support, so currently we can not hardcode correct - # soname into executable. Probably we can add versioning support to - # collect2, so additional links can be useful in future. - if test "$aix_use_runtimelinking" = yes; then - # If using run time linking (on AIX 4.2 or later) use lib.so - # instead of lib.a to let people know that these are not - # typical AIX shared libraries. - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - else - # We preserve .a as extension for shared libraries through AIX4.2 - # and later when we are not doing run time linking. - library_names_spec='${libname}${release}.a $libname.a' - soname_spec='${libname}${release}${shared_ext}$major' - fi - shlibpath_var=LIBPATH - fi - ;; - -amigaos*) - case $host_cpu in - powerpc) - # Since July 2007 AmigaOS4 officially supports .so libraries. - # When compiling the executable, add -use-dynld -Lsobjs: to the compileline. - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - ;; - m68k) - library_names_spec='$libname.ixlibrary $libname.a' - # Create ${libname}_ixlibrary.a entries in /sys/libs. - finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' - ;; - esac - ;; - -beos*) - library_names_spec='${libname}${shared_ext}' - dynamic_linker="$host_os ld.so" - shlibpath_var=LIBRARY_PATH - ;; - -bsdi[45]*) - version_type=linux - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' - shlibpath_var=LD_LIBRARY_PATH - sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" - sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" - # the default ld.so.conf also contains /usr/contrib/lib and - # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow - # libtool to hard-code these into programs - ;; - -cygwin* | mingw* | pw32* | cegcc*) - version_type=windows - shrext_cmds=".dll" - need_version=no - need_lib_prefix=no - - case $GCC,$cc_basename in - yes,*) - # gcc - library_names_spec='$libname.dll.a' - # DLL is installed to $(libdir)/../bin by postinstall_cmds - postinstall_cmds='base_file=`basename \${file}`~ - dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~ - dldir=$destdir/`dirname \$dlpath`~ - test -d \$dldir || mkdir -p \$dldir~ - $install_prog $dir/$dlname \$dldir/$dlname~ - chmod a+x \$dldir/$dlname~ - if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then - eval '\''$striplib \$dldir/$dlname'\'' || exit \$?; - fi' - postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ - dlpath=$dir/\$dldll~ - $RM \$dlpath' - shlibpath_overrides_runpath=yes - - case $host_os in - cygwin*) - # Cygwin DLLs use 'cyg' prefix rather than 'lib' - soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' - - sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/lib/w32api" - ;; - mingw* | cegcc*) - # MinGW DLLs use traditional 'lib' prefix - soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' - ;; - pw32*) - # pw32 DLLs use 'pw' prefix rather than 'lib' - library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' - ;; - esac - dynamic_linker='Win32 ld.exe' - ;; - - *,cl*) - # Native MSVC - libname_spec='$name' - soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' - library_names_spec='${libname}.dll.lib' - - case $build_os in - mingw*) - sys_lib_search_path_spec= - lt_save_ifs=$IFS - IFS=';' - for lt_path in $LIB - do - IFS=$lt_save_ifs - # Let DOS variable expansion print the short 8.3 style file name. - lt_path=`cd "$lt_path" 2>/dev/null && cmd //C "for %i in (".") do @echo %~si"` - sys_lib_search_path_spec="$sys_lib_search_path_spec $lt_path" - done - IFS=$lt_save_ifs - # Convert to MSYS style. - sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | sed -e 's|\\\\|/|g' -e 's| \\([a-zA-Z]\\):| /\\1|g' -e 's|^ ||'` - ;; - cygwin*) - # Convert to unix form, then to dos form, then back to unix form - # but this time dos style (no spaces!) so that the unix form looks - # like /cygdrive/c/PROGRA~1:/cygdr... - sys_lib_search_path_spec=`cygpath --path --unix "$LIB"` - sys_lib_search_path_spec=`cygpath --path --dos "$sys_lib_search_path_spec" 2>/dev/null` - sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` - ;; - *) - sys_lib_search_path_spec="$LIB" - if $ECHO "$sys_lib_search_path_spec" | $GREP ';[c-zC-Z]:/' >/dev/null; then - # It is most probably a Windows format PATH. - sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` - else - sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` - fi - # FIXME: find the short name or the path components, as spaces are - # common. (e.g. "Program Files" -> "PROGRA~1") - ;; - esac - - # DLL is installed to $(libdir)/../bin by postinstall_cmds - postinstall_cmds='base_file=`basename \${file}`~ - dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~ - dldir=$destdir/`dirname \$dlpath`~ - test -d \$dldir || mkdir -p \$dldir~ - $install_prog $dir/$dlname \$dldir/$dlname' - postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ - dlpath=$dir/\$dldll~ - $RM \$dlpath' - shlibpath_overrides_runpath=yes - dynamic_linker='Win32 link.exe' - ;; - - *) - # Assume MSVC wrapper - library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib' - dynamic_linker='Win32 ld.exe' - ;; - esac - # FIXME: first we should search . and the directory the executable is in - shlibpath_var=PATH - ;; - -darwin* | rhapsody*) - dynamic_linker="$host_os dyld" - version_type=darwin - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext' - soname_spec='${libname}${release}${major}$shared_ext' - shlibpath_overrides_runpath=yes - shlibpath_var=DYLD_LIBRARY_PATH - shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`' - - sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib" - sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib' - ;; - -dgux*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - ;; - -freebsd1*) - dynamic_linker=no - ;; - -freebsd* | dragonfly*) - # DragonFly does not have aout. When/if they implement a new - # versioning mechanism, adjust this. - if test -x /usr/bin/objformat; then - objformat=`/usr/bin/objformat` - else - case $host_os in - freebsd[123]*) objformat=aout ;; - *) objformat=elf ;; - esac - fi - version_type=freebsd-$objformat - case $version_type in - freebsd-elf*) - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' - need_version=no - need_lib_prefix=no - ;; - freebsd-*) - library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix' - need_version=yes - ;; - esac - shlibpath_var=LD_LIBRARY_PATH - case $host_os in - freebsd2*) - shlibpath_overrides_runpath=yes - ;; - freebsd3.[01]* | freebsdelf3.[01]*) - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - ;; - freebsd3.[2-9]* | freebsdelf3.[2-9]* | \ - freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1) - shlibpath_overrides_runpath=no - hardcode_into_libs=yes - ;; - *) # from 4.6 on, and DragonFly - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - ;; - esac - ;; - -gnu*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no - hardcode_into_libs=yes - ;; - -haiku*) - version_type=linux - need_lib_prefix=no - need_version=no - dynamic_linker="$host_os runtime_loader" - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LIBRARY_PATH - shlibpath_overrides_runpath=yes - sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib' - hardcode_into_libs=yes - ;; - -hpux9* | hpux10* | hpux11*) - # Give a soname corresponding to the major version so that dld.sl refuses to - # link against other versions. - version_type=sunos - need_lib_prefix=no - need_version=no - case $host_cpu in - ia64*) - shrext_cmds='.so' - hardcode_into_libs=yes - dynamic_linker="$host_os dld.so" - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - if test "X$HPUX_IA64_MODE" = X32; then - sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib" - else - sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64" - fi - sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec - ;; - hppa*64*) - shrext_cmds='.sl' - hardcode_into_libs=yes - dynamic_linker="$host_os dld.sl" - shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH - shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64" - sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec - ;; - *) - shrext_cmds='.sl' - dynamic_linker="$host_os dld.sl" - shlibpath_var=SHLIB_PATH - shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - ;; - esac - # HP-UX runs *really* slowly unless shared libraries are mode 555, ... - postinstall_cmds='chmod 555 $lib' - # or fails outright, so override atomically: - install_override_mode=555 - ;; - -interix[3-9]*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no - hardcode_into_libs=yes - ;; - -irix5* | irix6* | nonstopux*) - case $host_os in - nonstopux*) version_type=nonstopux ;; - *) - if test "$lt_cv_prog_gnu_ld" = yes; then - version_type=linux - else - version_type=irix - fi ;; - esac - need_lib_prefix=no - need_version=no - soname_spec='${libname}${release}${shared_ext}$major' - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}' - case $host_os in - irix5* | nonstopux*) - libsuff= shlibsuff= - ;; - *) - case $LD in # libtool.m4 will add one of these switches to LD - *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") - libsuff= shlibsuff= libmagic=32-bit;; - *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") - libsuff=32 shlibsuff=N32 libmagic=N32;; - *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") - libsuff=64 shlibsuff=64 libmagic=64-bit;; - *) libsuff= shlibsuff= libmagic=never-match;; - esac - ;; - esac - shlibpath_var=LD_LIBRARY${shlibsuff}_PATH - shlibpath_overrides_runpath=no - sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" - sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" - hardcode_into_libs=yes - ;; - -# No shared lib support for Linux oldld, aout, or coff. -linux*oldld* | linux*aout* | linux*coff*) - dynamic_linker=no - ;; - -# This must be Linux ELF. -linux* | k*bsd*-gnu | kopensolaris*-gnu) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no - - # Some binutils ld are patched to set DT_RUNPATH - if ${lt_cv_shlibpath_overrides_runpath+:} false; then : - $as_echo_n "(cached) " >&6 -else - lt_cv_shlibpath_overrides_runpath=no - save_LDFLAGS=$LDFLAGS - save_libdir=$libdir - eval "libdir=/foo; wl=\"$lt_prog_compiler_wl\"; \ - LDFLAGS=\"\$LDFLAGS $hardcode_libdir_flag_spec\"" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - if ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null; then : - lt_cv_shlibpath_overrides_runpath=yes -fi -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext - LDFLAGS=$save_LDFLAGS - libdir=$save_libdir - -fi - - shlibpath_overrides_runpath=$lt_cv_shlibpath_overrides_runpath - - # This implies no fast_install, which is unacceptable. - # Some rework will be needed to allow for fast_install - # before this can be enabled. - hardcode_into_libs=yes - - # Append ld.so.conf contents to the search path - if test -f /etc/ld.so.conf; then - lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '` - sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra" - fi - - # We used to test for /lib/ld.so.1 and disable shared libraries on - # powerpc, because MkLinux only supported shared libraries with the - # GNU dynamic linker. Since this was broken with cross compilers, - # most powerpc-linux boxes support dynamic linking these days and - # people can always --disable-shared, the test was removed, and we - # assume the GNU/Linux dynamic linker is in use. - dynamic_linker='GNU/Linux ld.so' - ;; - -netbsdelf*-gnu) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no - hardcode_into_libs=yes - dynamic_linker='NetBSD ld.elf_so' - ;; - -netbsd*) - version_type=sunos - need_lib_prefix=no - need_version=no - if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' - finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' - dynamic_linker='NetBSD (a.out) ld.so' - else - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - dynamic_linker='NetBSD ld.elf_so' - fi - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - ;; - -newsos6) - version_type=linux - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - ;; - -*nto* | *qnx*) - version_type=qnx - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no - hardcode_into_libs=yes - dynamic_linker='ldqnx.so' - ;; - -openbsd*) - version_type=sunos - sys_lib_dlsearch_path_spec="/usr/lib" - need_lib_prefix=no - # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs. - case $host_os in - openbsd3.3 | openbsd3.3.*) need_version=yes ;; - *) need_version=no ;; - esac - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' - finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' - shlibpath_var=LD_LIBRARY_PATH - if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then - case $host_os in - openbsd2.[89] | openbsd2.[89].*) - shlibpath_overrides_runpath=no - ;; - *) - shlibpath_overrides_runpath=yes - ;; - esac - else - shlibpath_overrides_runpath=yes - fi - ;; - -os2*) - libname_spec='$name' - shrext_cmds=".dll" - need_lib_prefix=no - library_names_spec='$libname${shared_ext} $libname.a' - dynamic_linker='OS/2 ld.exe' - shlibpath_var=LIBPATH - ;; - -osf3* | osf4* | osf5*) - version_type=osf - need_lib_prefix=no - need_version=no - soname_spec='${libname}${release}${shared_ext}$major' - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - shlibpath_var=LD_LIBRARY_PATH - sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" - sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" - ;; - -rdos*) - dynamic_linker=no - ;; - -solaris*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - # ldd complains unless libraries are executable - postinstall_cmds='chmod +x $lib' - ;; - -sunos4*) - version_type=sunos - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' - finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - if test "$with_gnu_ld" = yes; then - need_lib_prefix=no - fi - need_version=yes - ;; - -sysv4 | sysv4.3*) - version_type=linux - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - case $host_vendor in - sni) - shlibpath_overrides_runpath=no - need_lib_prefix=no - runpath_var=LD_RUN_PATH - ;; - siemens) - need_lib_prefix=no - ;; - motorola) - need_lib_prefix=no - need_version=no - shlibpath_overrides_runpath=no - sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' - ;; - esac - ;; - -sysv4*MP*) - if test -d /usr/nec ;then - version_type=linux - library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}' - soname_spec='$libname${shared_ext}.$major' - shlibpath_var=LD_LIBRARY_PATH - fi - ;; - -sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) - version_type=freebsd-elf - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - if test "$with_gnu_ld" = yes; then - sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib' - else - sys_lib_search_path_spec='/usr/ccs/lib /usr/lib' - case $host_os in - sco3.2v5*) - sys_lib_search_path_spec="$sys_lib_search_path_spec /lib" - ;; - esac - fi - sys_lib_dlsearch_path_spec='/usr/lib' - ;; - -tpf*) - # TPF is a cross-target only. Preferred cross-host = GNU/Linux. - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no - hardcode_into_libs=yes - ;; - -uts4*) - version_type=linux - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - ;; - -*) - dynamic_linker=no - ;; -esac -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $dynamic_linker" >&5 -$as_echo "$dynamic_linker" >&6; } -test "$dynamic_linker" = no && can_build_shared=no - -variables_saved_for_relink="PATH $shlibpath_var $runpath_var" -if test "$GCC" = yes; then - variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" -fi - -if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then - sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec" -fi -if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then - sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec" -fi - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to hardcode library paths into programs" >&5 -$as_echo_n "checking how to hardcode library paths into programs... " >&6; } -hardcode_action= -if test -n "$hardcode_libdir_flag_spec" || - test -n "$runpath_var" || - test "X$hardcode_automatic" = "Xyes" ; then - - # We can hardcode non-existent directories. - if test "$hardcode_direct" != no && - # If the only mechanism to avoid hardcoding is shlibpath_var, we - # have to relink, otherwise we might link with an installed library - # when we should be linking with a yet-to-be-installed one - ## test "$_LT_TAGVAR(hardcode_shlibpath_var, )" != no && - test "$hardcode_minus_L" != no; then - # Linking always hardcodes the temporary library directory. - hardcode_action=relink - else - # We can link without hardcoding, and we can hardcode nonexisting dirs. - hardcode_action=immediate - fi -else - # We cannot hardcode anything, or else we can only hardcode existing - # directories. - hardcode_action=unsupported -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $hardcode_action" >&5 -$as_echo "$hardcode_action" >&6; } - -if test "$hardcode_action" = relink || - test "$inherit_rpath" = yes; then - # Fast installation is not supported - enable_fast_install=no -elif test "$shlibpath_overrides_runpath" = yes || - test "$enable_shared" = no; then - # Fast installation is not necessary - enable_fast_install=needless -fi - - - - - - - if test "x$enable_dlopen" != xyes; then - enable_dlopen=unknown - enable_dlopen_self=unknown - enable_dlopen_self_static=unknown -else - lt_cv_dlopen=no - lt_cv_dlopen_libs= - - case $host_os in - beos*) - lt_cv_dlopen="load_add_on" - lt_cv_dlopen_libs= - lt_cv_dlopen_self=yes - ;; - - mingw* | pw32* | cegcc*) - lt_cv_dlopen="LoadLibrary" - lt_cv_dlopen_libs= - ;; - - cygwin*) - lt_cv_dlopen="dlopen" - lt_cv_dlopen_libs= - ;; - - darwin*) - # if libdl is installed we need to link against it - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5 -$as_echo_n "checking for dlopen in -ldl... " >&6; } -if ${ac_cv_lib_dl_dlopen+:} false; then : - $as_echo_n "(cached) " >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-ldl $LIBS" -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char dlopen (); -int -main () -{ -return dlopen (); - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - ac_cv_lib_dl_dlopen=yes -else - ac_cv_lib_dl_dlopen=no -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5 -$as_echo "$ac_cv_lib_dl_dlopen" >&6; } -if test "x$ac_cv_lib_dl_dlopen" = xyes; then : - lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl" -else - - lt_cv_dlopen="dyld" - lt_cv_dlopen_libs= - lt_cv_dlopen_self=yes - -fi - - ;; - - *) - ac_fn_c_check_func "$LINENO" "shl_load" "ac_cv_func_shl_load" -if test "x$ac_cv_func_shl_load" = xyes; then : - lt_cv_dlopen="shl_load" -else - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for shl_load in -ldld" >&5 -$as_echo_n "checking for shl_load in -ldld... " >&6; } -if ${ac_cv_lib_dld_shl_load+:} false; then : - $as_echo_n "(cached) " >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-ldld $LIBS" -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char shl_load (); -int -main () -{ -return shl_load (); - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - ac_cv_lib_dld_shl_load=yes -else - ac_cv_lib_dld_shl_load=no -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_shl_load" >&5 -$as_echo "$ac_cv_lib_dld_shl_load" >&6; } -if test "x$ac_cv_lib_dld_shl_load" = xyes; then : - lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld" -else - ac_fn_c_check_func "$LINENO" "dlopen" "ac_cv_func_dlopen" -if test "x$ac_cv_func_dlopen" = xyes; then : - lt_cv_dlopen="dlopen" -else - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5 -$as_echo_n "checking for dlopen in -ldl... " >&6; } -if ${ac_cv_lib_dl_dlopen+:} false; then : - $as_echo_n "(cached) " >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-ldl $LIBS" -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char dlopen (); -int -main () -{ -return dlopen (); - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - ac_cv_lib_dl_dlopen=yes -else - ac_cv_lib_dl_dlopen=no -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5 -$as_echo "$ac_cv_lib_dl_dlopen" >&6; } -if test "x$ac_cv_lib_dl_dlopen" = xyes; then : - lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl" -else - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -lsvld" >&5 -$as_echo_n "checking for dlopen in -lsvld... " >&6; } -if ${ac_cv_lib_svld_dlopen+:} false; then : - $as_echo_n "(cached) " >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-lsvld $LIBS" -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char dlopen (); -int -main () -{ -return dlopen (); - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - ac_cv_lib_svld_dlopen=yes -else - ac_cv_lib_svld_dlopen=no -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_svld_dlopen" >&5 -$as_echo "$ac_cv_lib_svld_dlopen" >&6; } -if test "x$ac_cv_lib_svld_dlopen" = xyes; then : - lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld" -else - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dld_link in -ldld" >&5 -$as_echo_n "checking for dld_link in -ldld... " >&6; } -if ${ac_cv_lib_dld_dld_link+:} false; then : - $as_echo_n "(cached) " >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-ldld $LIBS" -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char dld_link (); -int -main () -{ -return dld_link (); - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - ac_cv_lib_dld_dld_link=yes -else - ac_cv_lib_dld_dld_link=no -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_dld_link" >&5 -$as_echo "$ac_cv_lib_dld_dld_link" >&6; } -if test "x$ac_cv_lib_dld_dld_link" = xyes; then : - lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld" -fi - - -fi - - -fi - - -fi - - -fi - - -fi - - ;; - esac - - if test "x$lt_cv_dlopen" != xno; then - enable_dlopen=yes - else - enable_dlopen=no - fi - - case $lt_cv_dlopen in - dlopen) - save_CPPFLAGS="$CPPFLAGS" - test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H" - - save_LDFLAGS="$LDFLAGS" - wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\" - - save_LIBS="$LIBS" - LIBS="$lt_cv_dlopen_libs $LIBS" - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a program can dlopen itself" >&5 -$as_echo_n "checking whether a program can dlopen itself... " >&6; } -if ${lt_cv_dlopen_self+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test "$cross_compiling" = yes; then : - lt_cv_dlopen_self=cross -else - lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 - lt_status=$lt_dlunknown - cat > conftest.$ac_ext <<_LT_EOF -#line $LINENO "configure" -#include "confdefs.h" - -#if HAVE_DLFCN_H -#include -#endif - -#include - -#ifdef RTLD_GLOBAL -# define LT_DLGLOBAL RTLD_GLOBAL -#else -# ifdef DL_GLOBAL -# define LT_DLGLOBAL DL_GLOBAL -# else -# define LT_DLGLOBAL 0 -# endif -#endif - -/* We may have to define LT_DLLAZY_OR_NOW in the command line if we - find out it does not work in some platform. */ -#ifndef LT_DLLAZY_OR_NOW -# ifdef RTLD_LAZY -# define LT_DLLAZY_OR_NOW RTLD_LAZY -# else -# ifdef DL_LAZY -# define LT_DLLAZY_OR_NOW DL_LAZY -# else -# ifdef RTLD_NOW -# define LT_DLLAZY_OR_NOW RTLD_NOW -# else -# ifdef DL_NOW -# define LT_DLLAZY_OR_NOW DL_NOW -# else -# define LT_DLLAZY_OR_NOW 0 -# endif -# endif -# endif -# endif -#endif - -/* When -fvisbility=hidden is used, assume the code has been annotated - correspondingly for the symbols needed. */ -#if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3)) -int fnord () __attribute__((visibility("default"))); -#endif - -int fnord () { return 42; } -int main () -{ - void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); - int status = $lt_dlunknown; - - if (self) - { - if (dlsym (self,"fnord")) status = $lt_dlno_uscore; - else - { - if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; - else puts (dlerror ()); - } - /* dlclose (self); */ - } - else - puts (dlerror ()); - - return status; -} -_LT_EOF - if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5 - (eval $ac_link) 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } && test -s conftest${ac_exeext} 2>/dev/null; then - (./conftest; exit; ) >&5 2>/dev/null - lt_status=$? - case x$lt_status in - x$lt_dlno_uscore) lt_cv_dlopen_self=yes ;; - x$lt_dlneed_uscore) lt_cv_dlopen_self=yes ;; - x$lt_dlunknown|x*) lt_cv_dlopen_self=no ;; - esac - else : - # compilation failed - lt_cv_dlopen_self=no - fi -fi -rm -fr conftest* - - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_dlopen_self" >&5 -$as_echo "$lt_cv_dlopen_self" >&6; } - - if test "x$lt_cv_dlopen_self" = xyes; then - wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\" - { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a statically linked program can dlopen itself" >&5 -$as_echo_n "checking whether a statically linked program can dlopen itself... " >&6; } -if ${lt_cv_dlopen_self_static+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test "$cross_compiling" = yes; then : - lt_cv_dlopen_self_static=cross -else - lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 - lt_status=$lt_dlunknown - cat > conftest.$ac_ext <<_LT_EOF -#line $LINENO "configure" -#include "confdefs.h" - -#if HAVE_DLFCN_H -#include -#endif - -#include - -#ifdef RTLD_GLOBAL -# define LT_DLGLOBAL RTLD_GLOBAL -#else -# ifdef DL_GLOBAL -# define LT_DLGLOBAL DL_GLOBAL -# else -# define LT_DLGLOBAL 0 -# endif -#endif - -/* We may have to define LT_DLLAZY_OR_NOW in the command line if we - find out it does not work in some platform. */ -#ifndef LT_DLLAZY_OR_NOW -# ifdef RTLD_LAZY -# define LT_DLLAZY_OR_NOW RTLD_LAZY -# else -# ifdef DL_LAZY -# define LT_DLLAZY_OR_NOW DL_LAZY -# else -# ifdef RTLD_NOW -# define LT_DLLAZY_OR_NOW RTLD_NOW -# else -# ifdef DL_NOW -# define LT_DLLAZY_OR_NOW DL_NOW -# else -# define LT_DLLAZY_OR_NOW 0 -# endif -# endif -# endif -# endif -#endif - -/* When -fvisbility=hidden is used, assume the code has been annotated - correspondingly for the symbols needed. */ -#if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3)) -int fnord () __attribute__((visibility("default"))); -#endif - -int fnord () { return 42; } -int main () -{ - void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); - int status = $lt_dlunknown; - - if (self) - { - if (dlsym (self,"fnord")) status = $lt_dlno_uscore; - else - { - if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; - else puts (dlerror ()); - } - /* dlclose (self); */ - } - else - puts (dlerror ()); - - return status; -} -_LT_EOF - if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5 - (eval $ac_link) 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } && test -s conftest${ac_exeext} 2>/dev/null; then - (./conftest; exit; ) >&5 2>/dev/null - lt_status=$? - case x$lt_status in - x$lt_dlno_uscore) lt_cv_dlopen_self_static=yes ;; - x$lt_dlneed_uscore) lt_cv_dlopen_self_static=yes ;; - x$lt_dlunknown|x*) lt_cv_dlopen_self_static=no ;; - esac - else : - # compilation failed - lt_cv_dlopen_self_static=no - fi -fi -rm -fr conftest* - - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_dlopen_self_static" >&5 -$as_echo "$lt_cv_dlopen_self_static" >&6; } - fi - - CPPFLAGS="$save_CPPFLAGS" - LDFLAGS="$save_LDFLAGS" - LIBS="$save_LIBS" - ;; - esac - - case $lt_cv_dlopen_self in - yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;; - *) enable_dlopen_self=unknown ;; - esac - - case $lt_cv_dlopen_self_static in - yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;; - *) enable_dlopen_self_static=unknown ;; - esac -fi - - - - - - - - - - - - - - - - - -striplib= -old_striplib= -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether stripping libraries is possible" >&5 -$as_echo_n "checking whether stripping libraries is possible... " >&6; } -if test -n "$STRIP" && $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then - test -z "$old_striplib" && old_striplib="$STRIP --strip-debug" - test -z "$striplib" && striplib="$STRIP --strip-unneeded" - { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -$as_echo "yes" >&6; } -else -# FIXME - insert some real tests, host_os isn't really good enough - case $host_os in - darwin*) - if test -n "$STRIP" ; then - striplib="$STRIP -x" - old_striplib="$STRIP -S" - { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -$as_echo "yes" >&6; } - else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } - fi - ;; - *) - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } - ;; - esac -fi - - - - - - - - - - - - - # Report which library types will actually be built - { $as_echo "$as_me:${as_lineno-$LINENO}: checking if libtool supports shared libraries" >&5 -$as_echo_n "checking if libtool supports shared libraries... " >&6; } - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $can_build_shared" >&5 -$as_echo "$can_build_shared" >&6; } - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build shared libraries" >&5 -$as_echo_n "checking whether to build shared libraries... " >&6; } - test "$can_build_shared" = "no" && enable_shared=no - - # On AIX, shared libraries and static libraries use the same namespace, and - # are all built from PIC. - case $host_os in - aix3*) - test "$enable_shared" = yes && enable_static=no - if test -n "$RANLIB"; then - archive_cmds="$archive_cmds~\$RANLIB \$lib" - postinstall_cmds='$RANLIB $lib' - fi - ;; - - aix[4-9]*) - if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then - test "$enable_shared" = yes && enable_static=no - fi - ;; - esac - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_shared" >&5 -$as_echo "$enable_shared" >&6; } - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build static libraries" >&5 -$as_echo_n "checking whether to build static libraries... " >&6; } - # Make sure either enable_shared or enable_static is yes. - test "$enable_shared" = yes || enable_static=yes - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_static" >&5 -$as_echo "$enable_static" >&6; } - - - - -fi -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - -CC="$lt_save_CC" - - - - - - - - - - - - - - ac_config_commands="$ac_config_commands libtool" - - - - -# Only expand once: - - - -# Checks for libraries. -#AC_CHECK_LIB([c], [main]) -#AC_CHECK_LIB([m], [main]) -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for main in -lssl" >&5 -$as_echo_n "checking for main in -lssl... " >&6; } -if ${ac_cv_lib_ssl_main+:} false; then : - $as_echo_n "(cached) " >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-lssl $LIBS" -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - - -int -main () -{ -return main (); - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - ac_cv_lib_ssl_main=yes -else - ac_cv_lib_ssl_main=no -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_ssl_main" >&5 -$as_echo "$ac_cv_lib_ssl_main" >&6; } -if test "x$ac_cv_lib_ssl_main" = xyes; then : - cat >>confdefs.h <<_ACEOF -@%:@define HAVE_LIBSSL 1 -_ACEOF - - LIBS="-lssl $LIBS" - -else - as_fn_error $? "$missing_library" "$LINENO" 5 -fi - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for main in -lpthread" >&5 -$as_echo_n "checking for main in -lpthread... " >&6; } -if ${ac_cv_lib_pthread_main+:} false; then : - $as_echo_n "(cached) " >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-lpthread $LIBS" -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - - -int -main () -{ -return main (); - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - ac_cv_lib_pthread_main=yes -else - ac_cv_lib_pthread_main=no -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_pthread_main" >&5 -$as_echo "$ac_cv_lib_pthread_main" >&6; } -if test "x$ac_cv_lib_pthread_main" = xyes; then : - cat >>confdefs.h <<_ACEOF -@%:@define HAVE_LIBPTHREAD 1 -_ACEOF - - LIBS="-lpthread $LIBS" - -else - as_fn_error $? "$missing_library" "$LINENO" 5 -fi - - -OUTPUT_FILES="Makefile" - -LIBDIR=$PREFIX - -ac_config_files="$ac_config_files ${OUTPUT_FILES}" - -ac_config_files="$ac_config_files Makefile src/Makefile" - -cat >confcache <<\_ACEOF -# This file is a shell script that caches the results of configure -# tests run on this system so they can be shared between configure -# scripts and configure runs, see configure's option --config-cache. -# It is not useful on other systems. If it contains results you don't -# want to keep, you may remove or edit it. -# -# config.status only pays attention to the cache file if you give it -# the --recheck option to rerun configure. -# -# `ac_cv_env_foo' variables (set or unset) will be overridden when -# loading this file, other *unset* `ac_cv_foo' will be assigned the -# following values. - -_ACEOF - -# The following way of writing the cache mishandles newlines in values, -# but we know of no workaround that is simple, portable, and efficient. -# So, we kill variables containing newlines. -# Ultrix sh set writes to stderr and can't be redirected directly, -# and sets the high bit in the cache file unless we assign to the vars. -( - for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do - eval ac_val=\$$ac_var - case $ac_val in #( - *${as_nl}*) - case $ac_var in #( - *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5 -$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;; - esac - case $ac_var in #( - _ | IFS | as_nl) ;; #( - BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #( - *) { eval $ac_var=; unset $ac_var;} ;; - esac ;; - esac - done - - (set) 2>&1 | - case $as_nl`(ac_space=' '; set) 2>&1` in #( - *${as_nl}ac_space=\ *) - # `set' does not quote correctly, so add quotes: double-quote - # substitution turns \\\\ into \\, and sed turns \\ into \. - sed -n \ - "s/'/'\\\\''/g; - s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p" - ;; #( - *) - # `set' quotes correctly as required by POSIX, so do not add quotes. - sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" - ;; - esac | - sort -) | - sed ' - /^ac_cv_env_/b end - t clear - :clear - s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/ - t end - s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/ - :end' >>confcache -if diff "$cache_file" confcache >/dev/null 2>&1; then :; else - if test -w "$cache_file"; then - if test "x$cache_file" != "x/dev/null"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: updating cache $cache_file" >&5 -$as_echo "$as_me: updating cache $cache_file" >&6;} - if test ! -f "$cache_file" || test -h "$cache_file"; then - cat confcache >"$cache_file" - else - case $cache_file in #( - */* | ?:*) - mv -f confcache "$cache_file"$$ && - mv -f "$cache_file"$$ "$cache_file" ;; #( - *) - mv -f confcache "$cache_file" ;; - esac - fi - fi - else - { $as_echo "$as_me:${as_lineno-$LINENO}: not updating unwritable cache $cache_file" >&5 -$as_echo "$as_me: not updating unwritable cache $cache_file" >&6;} - fi -fi -rm -f confcache - -test "x$prefix" = xNONE && prefix=$ac_default_prefix -# Let make expand exec_prefix. -test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' - -DEFS=-DHAVE_CONFIG_H - -ac_libobjs= -ac_ltlibobjs= -U= -for ac_i in : $LIB@&t@OBJS; do test "x$ac_i" = x: && continue - # 1. Remove the extension, and $U if already installed. - ac_script='s/\$U\././;s/\.o$//;s/\.obj$//' - ac_i=`$as_echo "$ac_i" | sed "$ac_script"` - # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR - # will be set to the directory where LIBOBJS objects are built. - as_fn_append ac_libobjs " \${LIBOBJDIR}$ac_i\$U.$ac_objext" - as_fn_append ac_ltlibobjs " \${LIBOBJDIR}$ac_i"'$U.lo' -done -LIB@&t@OBJS=$ac_libobjs - -LTLIBOBJS=$ac_ltlibobjs - - - if test -n "$EXEEXT"; then - am__EXEEXT_TRUE= - am__EXEEXT_FALSE='#' -else - am__EXEEXT_TRUE='#' - am__EXEEXT_FALSE= -fi - -if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then - as_fn_error $? "conditional \"AMDEP\" was never defined. -Usually this means the macro was only invoked conditionally." "$LINENO" 5 -fi -if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then - as_fn_error $? "conditional \"am__fastdepCC\" was never defined. -Usually this means the macro was only invoked conditionally." "$LINENO" 5 -fi - -: "${CONFIG_STATUS=./config.status}" -ac_write_fail=0 -ac_clean_files_save=$ac_clean_files -ac_clean_files="$ac_clean_files $CONFIG_STATUS" -{ $as_echo "$as_me:${as_lineno-$LINENO}: creating $CONFIG_STATUS" >&5 -$as_echo "$as_me: creating $CONFIG_STATUS" >&6;} -as_write_fail=0 -cat >$CONFIG_STATUS <<_ASEOF || as_write_fail=1 -#! $SHELL -# Generated by $as_me. -# Run this file to recreate the current configuration. -# Compiler output produced by configure, useful for debugging -# configure, is in config.log if it exists. - -debug=false -ac_cs_recheck=false -ac_cs_silent=false - -SHELL=\${CONFIG_SHELL-$SHELL} -export SHELL -_ASEOF -cat >>$CONFIG_STATUS <<\_ASEOF || as_write_fail=1 -## -------------------- ## -## M4sh Initialization. ## -## -------------------- ## - -# Be more Bourne compatible -DUALCASE=1; export DUALCASE # for MKS sh -if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then : - emulate sh - NULLCMD=: - # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which - # is contrary to our usage. Disable this feature. - alias -g '${1+"$@"}'='"$@"' - setopt NO_GLOB_SUBST -else - case `(set -o) 2>/dev/null` in @%:@( - *posix*) : - set -o posix ;; @%:@( - *) : - ;; -esac -fi - - -as_nl=' -' -export as_nl -# Printing a long string crashes Solaris 7 /usr/bin/printf. -as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' -as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo -as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo -# Prefer a ksh shell builtin over an external printf program on Solaris, -# but without wasting forks for bash or zsh. -if test -z "$BASH_VERSION$ZSH_VERSION" \ - && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then - as_echo='print -r --' - as_echo_n='print -rn --' -elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then - as_echo='printf %s\n' - as_echo_n='printf %s' -else - if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then - as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"' - as_echo_n='/usr/ucb/echo -n' - else - as_echo_body='eval expr "X$1" : "X\\(.*\\)"' - as_echo_n_body='eval - arg=$1; - case $arg in @%:@( - *"$as_nl"*) - expr "X$arg" : "X\\(.*\\)$as_nl"; - arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;; - esac; - expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl" - ' - export as_echo_n_body - as_echo_n='sh -c $as_echo_n_body as_echo' - fi - export as_echo_body - as_echo='sh -c $as_echo_body as_echo' -fi - -# The user is always right. -if test "${PATH_SEPARATOR+set}" != set; then - PATH_SEPARATOR=: - (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { - (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || - PATH_SEPARATOR=';' - } -fi - - -# IFS -# We need space, tab and new line, in precisely that order. Quoting is -# there to prevent editors from complaining about space-tab. -# (If _AS_PATH_WALK were called with IFS unset, it would disable word -# splitting by setting IFS to empty value.) -IFS=" "" $as_nl" - -# Find who we are. Look in the path if we contain no directory separator. -as_myself= -case $0 in @%:@(( - *[\\/]* ) as_myself=$0 ;; - *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break - done -IFS=$as_save_IFS - - ;; -esac -# We did not find ourselves, most probably we were run as `sh COMMAND' -# in which case we are not to be found in the path. -if test "x$as_myself" = x; then - as_myself=$0 -fi -if test ! -f "$as_myself"; then - $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 - exit 1 -fi - -# Unset variables that we do not need and which cause bugs (e.g. in -# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1" -# suppresses any "Segmentation fault" message there. '((' could -# trigger a bug in pdksh 5.2.14. -for as_var in BASH_ENV ENV MAIL MAILPATH -do eval test x\${$as_var+set} = xset \ - && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || : -done -PS1='$ ' -PS2='> ' -PS4='+ ' - -# NLS nuisances. -LC_ALL=C -export LC_ALL -LANGUAGE=C -export LANGUAGE - -# CDPATH. -(unset CDPATH) >/dev/null 2>&1 && unset CDPATH - - -@%:@ as_fn_error STATUS ERROR [LINENO LOG_FD] -@%:@ ---------------------------------------- -@%:@ Output "`basename @S|@0`: error: ERROR" to stderr. If LINENO and LOG_FD are -@%:@ provided, also output the error to LOG_FD, referencing LINENO. Then exit the -@%:@ script with STATUS, using 1 if that was 0. -as_fn_error () -{ - as_status=$1; test $as_status -eq 0 && as_status=1 - if test "$4"; then - as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4 - fi - $as_echo "$as_me: error: $2" >&2 - as_fn_exit $as_status -} @%:@ as_fn_error - - -@%:@ as_fn_set_status STATUS -@%:@ ----------------------- -@%:@ Set @S|@? to STATUS, without forking. -as_fn_set_status () -{ - return $1 -} @%:@ as_fn_set_status - -@%:@ as_fn_exit STATUS -@%:@ ----------------- -@%:@ Exit the shell with STATUS, even in a "trap 0" or "set -e" context. -as_fn_exit () -{ - set +e - as_fn_set_status $1 - exit $1 -} @%:@ as_fn_exit - -@%:@ as_fn_unset VAR -@%:@ --------------- -@%:@ Portably unset VAR. -as_fn_unset () -{ - { eval $1=; unset $1;} -} -as_unset=as_fn_unset -@%:@ as_fn_append VAR VALUE -@%:@ ---------------------- -@%:@ Append the text in VALUE to the end of the definition contained in VAR. Take -@%:@ advantage of any shell optimizations that allow amortized linear growth over -@%:@ repeated appends, instead of the typical quadratic growth present in naive -@%:@ implementations. -if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then : - eval 'as_fn_append () - { - eval $1+=\$2 - }' -else - as_fn_append () - { - eval $1=\$$1\$2 - } -fi # as_fn_append - -@%:@ as_fn_arith ARG... -@%:@ ------------------ -@%:@ Perform arithmetic evaluation on the ARGs, and store the result in the -@%:@ global @S|@as_val. Take advantage of shells that can avoid forks. The arguments -@%:@ must be portable across @S|@(()) and expr. -if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then : - eval 'as_fn_arith () - { - as_val=$(( $* )) - }' -else - as_fn_arith () - { - as_val=`expr "$@" || test $? -eq 1` - } -fi # as_fn_arith - - -if expr a : '\(a\)' >/dev/null 2>&1 && - test "X`expr 00001 : '.*\(...\)'`" = X001; then - as_expr=expr -else - as_expr=false -fi - -if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then - as_basename=basename -else - as_basename=false -fi - -if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then - as_dirname=dirname -else - as_dirname=false -fi - -as_me=`$as_basename -- "$0" || -$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ - X"$0" : 'X\(//\)$' \| \ - X"$0" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X/"$0" | - sed '/^.*\/\([^/][^/]*\)\/*$/{ - s//\1/ - q - } - /^X\/\(\/\/\)$/{ - s//\1/ - q - } - /^X\/\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - -# Avoid depending upon Character Ranges. -as_cr_letters='abcdefghijklmnopqrstuvwxyz' -as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' -as_cr_Letters=$as_cr_letters$as_cr_LETTERS -as_cr_digits='0123456789' -as_cr_alnum=$as_cr_Letters$as_cr_digits - -ECHO_C= ECHO_N= ECHO_T= -case `echo -n x` in @%:@((((( --n*) - case `echo 'xy\c'` in - *c*) ECHO_T=' ';; # ECHO_T is single tab character. - xy) ECHO_C='\c';; - *) echo `echo ksh88 bug on AIX 6.1` > /dev/null - ECHO_T=' ';; - esac;; -*) - ECHO_N='-n';; -esac - -rm -f conf$$ conf$$.exe conf$$.file -if test -d conf$$.dir; then - rm -f conf$$.dir/conf$$.file -else - rm -f conf$$.dir - mkdir conf$$.dir 2>/dev/null -fi -if (echo >conf$$.file) 2>/dev/null; then - if ln -s conf$$.file conf$$ 2>/dev/null; then - as_ln_s='ln -s' - # ... but there are two gotchas: - # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. - # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. - # In both cases, we have to default to `cp -p'. - ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || - as_ln_s='cp -p' - elif ln conf$$.file conf$$ 2>/dev/null; then - as_ln_s=ln - else - as_ln_s='cp -p' - fi -else - as_ln_s='cp -p' -fi -rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file -rmdir conf$$.dir 2>/dev/null - - -@%:@ as_fn_mkdir_p -@%:@ ------------- -@%:@ Create "@S|@as_dir" as a directory, including parents if necessary. -as_fn_mkdir_p () -{ - - case $as_dir in #( - -*) as_dir=./$as_dir;; - esac - test -d "$as_dir" || eval $as_mkdir_p || { - as_dirs= - while :; do - case $as_dir in #( - *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( - *) as_qdir=$as_dir;; - esac - as_dirs="'$as_qdir' $as_dirs" - as_dir=`$as_dirname -- "$as_dir" || -$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$as_dir" : 'X\(//\)[^/]' \| \ - X"$as_dir" : 'X\(//\)$' \| \ - X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X"$as_dir" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - test -d "$as_dir" && break - done - test -z "$as_dirs" || eval "mkdir $as_dirs" - } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir" - - -} @%:@ as_fn_mkdir_p -if mkdir -p . 2>/dev/null; then - as_mkdir_p='mkdir -p "$as_dir"' -else - test -d ./-p && rmdir ./-p - as_mkdir_p=false -fi - -if test -x / >/dev/null 2>&1; then - as_test_x='test -x' -else - if ls -dL / >/dev/null 2>&1; then - as_ls_L_option=L - else - as_ls_L_option= - fi - as_test_x=' - eval sh -c '\'' - if test -d "$1"; then - test -d "$1/."; - else - case $1 in @%:@( - -*)set "./$1";; - esac; - case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in @%:@(( - ???[sx]*):;;*)false;;esac;fi - '\'' sh - ' -fi -as_executable_p=$as_test_x - -# Sed expression to map a string onto a valid CPP name. -as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" - -# Sed expression to map a string onto a valid variable name. -as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" - - -exec 6>&1 -## ----------------------------------- ## -## Main body of $CONFIG_STATUS script. ## -## ----------------------------------- ## -_ASEOF -test $as_write_fail = 0 && chmod +x $CONFIG_STATUS || ac_write_fail=1 - -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -# Save the log message, to keep $0 and so on meaningful, and to -# report actual input values of CONFIG_FILES etc. instead of their -# values after options handling. -ac_log=" -This file was extended by shairport.c $as_me 1.2.0, which was -generated by GNU Autoconf 2.68. Invocation command line was - - CONFIG_FILES = $CONFIG_FILES - CONFIG_HEADERS = $CONFIG_HEADERS - CONFIG_LINKS = $CONFIG_LINKS - CONFIG_COMMANDS = $CONFIG_COMMANDS - $ $0 $@ - -on `(hostname || uname -n) 2>/dev/null | sed 1q` -" - -_ACEOF - -case $ac_config_files in *" -"*) set x $ac_config_files; shift; ac_config_files=$*;; -esac - -case $ac_config_headers in *" -"*) set x $ac_config_headers; shift; ac_config_headers=$*;; -esac - - -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -# Files that config.status was made for. -config_files="$ac_config_files" -config_headers="$ac_config_headers" -config_commands="$ac_config_commands" - -_ACEOF - -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -ac_cs_usage="\ -\`$as_me' instantiates files and other configuration actions -from templates according to the current configuration. Unless the files -and actions are specified as TAGs, all are instantiated by default. - -Usage: $0 [OPTION]... [TAG]... - - -h, --help print this help, then exit - -V, --version print version number and configuration settings, then exit - --config print configuration, then exit - -q, --quiet, --silent - do not print progress messages - -d, --debug don't remove temporary files - --recheck update $as_me by reconfiguring in the same conditions - --file=FILE[:TEMPLATE] - instantiate the configuration file FILE - --header=FILE[:TEMPLATE] - instantiate the configuration header FILE - -Configuration files: -$config_files - -Configuration headers: -$config_headers - -Configuration commands: -$config_commands - -Report bugs to ." - -_ACEOF -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`" -ac_cs_version="\\ -shairport.c config.status 1.2.0 -configured by $0, generated by GNU Autoconf 2.68, - with options \\"\$ac_cs_config\\" - -Copyright (C) 2010 Free Software Foundation, Inc. -This config.status script is free software; the Free Software Foundation -gives unlimited permission to copy, distribute and modify it." - -ac_pwd='$ac_pwd' -srcdir='$srcdir' -INSTALL='$INSTALL' -MKDIR_P='$MKDIR_P' -AWK='$AWK' -test -n "\$AWK" || AWK=awk -_ACEOF - -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -# The default lists apply if the user does not specify any file. -ac_need_defaults=: -while test $# != 0 -do - case $1 in - --*=?*) - ac_option=`expr "X$1" : 'X\([^=]*\)='` - ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'` - ac_shift=: - ;; - --*=) - ac_option=`expr "X$1" : 'X\([^=]*\)='` - ac_optarg= - ac_shift=: - ;; - *) - ac_option=$1 - ac_optarg=$2 - ac_shift=shift - ;; - esac - - case $ac_option in - # Handling of the options. - -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) - ac_cs_recheck=: ;; - --version | --versio | --versi | --vers | --ver | --ve | --v | -V ) - $as_echo "$ac_cs_version"; exit ;; - --config | --confi | --conf | --con | --co | --c ) - $as_echo "$ac_cs_config"; exit ;; - --debug | --debu | --deb | --de | --d | -d ) - debug=: ;; - --file | --fil | --fi | --f ) - $ac_shift - case $ac_optarg in - *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; - '') as_fn_error $? "missing file argument" ;; - esac - as_fn_append CONFIG_FILES " '$ac_optarg'" - ac_need_defaults=false;; - --header | --heade | --head | --hea ) - $ac_shift - case $ac_optarg in - *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; - esac - as_fn_append CONFIG_HEADERS " '$ac_optarg'" - ac_need_defaults=false;; - --he | --h) - # Conflict between --help and --header - as_fn_error $? "ambiguous option: \`$1' -Try \`$0 --help' for more information.";; - --help | --hel | -h ) - $as_echo "$ac_cs_usage"; exit ;; - -q | -quiet | --quiet | --quie | --qui | --qu | --q \ - | -silent | --silent | --silen | --sile | --sil | --si | --s) - ac_cs_silent=: ;; - - # This is an error. - -*) as_fn_error $? "unrecognized option: \`$1' -Try \`$0 --help' for more information." ;; - - *) as_fn_append ac_config_targets " $1" - ac_need_defaults=false ;; - - esac - shift -done - -ac_configure_extra_args= - -if $ac_cs_silent; then - exec 6>/dev/null - ac_configure_extra_args="$ac_configure_extra_args --silent" -fi - -_ACEOF -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -if \$ac_cs_recheck; then - set X '$SHELL' '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion - shift - \$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6 - CONFIG_SHELL='$SHELL' - export CONFIG_SHELL - exec "\$@" -fi - -_ACEOF -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -exec 5>>config.log -{ - echo - sed 'h;s/./-/g;s/^.../@%:@@%:@ /;s/...$/ @%:@@%:@/;p;x;p;x' <<_ASBOX -@%:@@%:@ Running $as_me. @%:@@%:@ -_ASBOX - $as_echo "$ac_log" -} >&5 - -_ACEOF -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -# -# INIT-COMMANDS -# -AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir" - - -# The HP-UX ksh and POSIX shell print the target directory to stdout -# if CDPATH is set. -(unset CDPATH) >/dev/null 2>&1 && unset CDPATH - -sed_quote_subst='$sed_quote_subst' -double_quote_subst='$double_quote_subst' -delay_variable_subst='$delay_variable_subst' -enable_static='`$ECHO "$enable_static" | $SED "$delay_single_quote_subst"`' -macro_version='`$ECHO "$macro_version" | $SED "$delay_single_quote_subst"`' -macro_revision='`$ECHO "$macro_revision" | $SED "$delay_single_quote_subst"`' -enable_shared='`$ECHO "$enable_shared" | $SED "$delay_single_quote_subst"`' -pic_mode='`$ECHO "$pic_mode" | $SED "$delay_single_quote_subst"`' -enable_fast_install='`$ECHO "$enable_fast_install" | $SED "$delay_single_quote_subst"`' -SHELL='`$ECHO "$SHELL" | $SED "$delay_single_quote_subst"`' -ECHO='`$ECHO "$ECHO" | $SED "$delay_single_quote_subst"`' -host_alias='`$ECHO "$host_alias" | $SED "$delay_single_quote_subst"`' -host='`$ECHO "$host" | $SED "$delay_single_quote_subst"`' -host_os='`$ECHO "$host_os" | $SED "$delay_single_quote_subst"`' -build_alias='`$ECHO "$build_alias" | $SED "$delay_single_quote_subst"`' -build='`$ECHO "$build" | $SED "$delay_single_quote_subst"`' -build_os='`$ECHO "$build_os" | $SED "$delay_single_quote_subst"`' -SED='`$ECHO "$SED" | $SED "$delay_single_quote_subst"`' -Xsed='`$ECHO "$Xsed" | $SED "$delay_single_quote_subst"`' -GREP='`$ECHO "$GREP" | $SED "$delay_single_quote_subst"`' -EGREP='`$ECHO "$EGREP" | $SED "$delay_single_quote_subst"`' -FGREP='`$ECHO "$FGREP" | $SED "$delay_single_quote_subst"`' -LD='`$ECHO "$LD" | $SED "$delay_single_quote_subst"`' -NM='`$ECHO "$NM" | $SED "$delay_single_quote_subst"`' -LN_S='`$ECHO "$LN_S" | $SED "$delay_single_quote_subst"`' -max_cmd_len='`$ECHO "$max_cmd_len" | $SED "$delay_single_quote_subst"`' -ac_objext='`$ECHO "$ac_objext" | $SED "$delay_single_quote_subst"`' -exeext='`$ECHO "$exeext" | $SED "$delay_single_quote_subst"`' -lt_unset='`$ECHO "$lt_unset" | $SED "$delay_single_quote_subst"`' -lt_SP2NL='`$ECHO "$lt_SP2NL" | $SED "$delay_single_quote_subst"`' -lt_NL2SP='`$ECHO "$lt_NL2SP" | $SED "$delay_single_quote_subst"`' -lt_cv_to_host_file_cmd='`$ECHO "$lt_cv_to_host_file_cmd" | $SED "$delay_single_quote_subst"`' -lt_cv_to_tool_file_cmd='`$ECHO "$lt_cv_to_tool_file_cmd" | $SED "$delay_single_quote_subst"`' -reload_flag='`$ECHO "$reload_flag" | $SED "$delay_single_quote_subst"`' -reload_cmds='`$ECHO "$reload_cmds" | $SED "$delay_single_quote_subst"`' -OBJDUMP='`$ECHO "$OBJDUMP" | $SED "$delay_single_quote_subst"`' -deplibs_check_method='`$ECHO "$deplibs_check_method" | $SED "$delay_single_quote_subst"`' -file_magic_cmd='`$ECHO "$file_magic_cmd" | $SED "$delay_single_quote_subst"`' -file_magic_glob='`$ECHO "$file_magic_glob" | $SED "$delay_single_quote_subst"`' -want_nocaseglob='`$ECHO "$want_nocaseglob" | $SED "$delay_single_quote_subst"`' -DLLTOOL='`$ECHO "$DLLTOOL" | $SED "$delay_single_quote_subst"`' -sharedlib_from_linklib_cmd='`$ECHO "$sharedlib_from_linklib_cmd" | $SED "$delay_single_quote_subst"`' -AR='`$ECHO "$AR" | $SED "$delay_single_quote_subst"`' -AR_FLAGS='`$ECHO "$AR_FLAGS" | $SED "$delay_single_quote_subst"`' -archiver_list_spec='`$ECHO "$archiver_list_spec" | $SED "$delay_single_quote_subst"`' -STRIP='`$ECHO "$STRIP" | $SED "$delay_single_quote_subst"`' -RANLIB='`$ECHO "$RANLIB" | $SED "$delay_single_quote_subst"`' -old_postinstall_cmds='`$ECHO "$old_postinstall_cmds" | $SED "$delay_single_quote_subst"`' -old_postuninstall_cmds='`$ECHO "$old_postuninstall_cmds" | $SED "$delay_single_quote_subst"`' -old_archive_cmds='`$ECHO "$old_archive_cmds" | $SED "$delay_single_quote_subst"`' -lock_old_archive_extraction='`$ECHO "$lock_old_archive_extraction" | $SED "$delay_single_quote_subst"`' -CC='`$ECHO "$CC" | $SED "$delay_single_quote_subst"`' -CFLAGS='`$ECHO "$CFLAGS" | $SED "$delay_single_quote_subst"`' -compiler='`$ECHO "$compiler" | $SED "$delay_single_quote_subst"`' -GCC='`$ECHO "$GCC" | $SED "$delay_single_quote_subst"`' -lt_cv_sys_global_symbol_pipe='`$ECHO "$lt_cv_sys_global_symbol_pipe" | $SED "$delay_single_quote_subst"`' -lt_cv_sys_global_symbol_to_cdecl='`$ECHO "$lt_cv_sys_global_symbol_to_cdecl" | $SED "$delay_single_quote_subst"`' -lt_cv_sys_global_symbol_to_c_name_address='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address" | $SED "$delay_single_quote_subst"`' -lt_cv_sys_global_symbol_to_c_name_address_lib_prefix='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address_lib_prefix" | $SED "$delay_single_quote_subst"`' -nm_file_list_spec='`$ECHO "$nm_file_list_spec" | $SED "$delay_single_quote_subst"`' -lt_sysroot='`$ECHO "$lt_sysroot" | $SED "$delay_single_quote_subst"`' -objdir='`$ECHO "$objdir" | $SED "$delay_single_quote_subst"`' -MAGIC_CMD='`$ECHO "$MAGIC_CMD" | $SED "$delay_single_quote_subst"`' -lt_prog_compiler_no_builtin_flag='`$ECHO "$lt_prog_compiler_no_builtin_flag" | $SED "$delay_single_quote_subst"`' -lt_prog_compiler_pic='`$ECHO "$lt_prog_compiler_pic" | $SED "$delay_single_quote_subst"`' -lt_prog_compiler_wl='`$ECHO "$lt_prog_compiler_wl" | $SED "$delay_single_quote_subst"`' -lt_prog_compiler_static='`$ECHO "$lt_prog_compiler_static" | $SED "$delay_single_quote_subst"`' -lt_cv_prog_compiler_c_o='`$ECHO "$lt_cv_prog_compiler_c_o" | $SED "$delay_single_quote_subst"`' -need_locks='`$ECHO "$need_locks" | $SED "$delay_single_quote_subst"`' -MANIFEST_TOOL='`$ECHO "$MANIFEST_TOOL" | $SED "$delay_single_quote_subst"`' -DSYMUTIL='`$ECHO "$DSYMUTIL" | $SED "$delay_single_quote_subst"`' -NMEDIT='`$ECHO "$NMEDIT" | $SED "$delay_single_quote_subst"`' -LIPO='`$ECHO "$LIPO" | $SED "$delay_single_quote_subst"`' -OTOOL='`$ECHO "$OTOOL" | $SED "$delay_single_quote_subst"`' -OTOOL64='`$ECHO "$OTOOL64" | $SED "$delay_single_quote_subst"`' -libext='`$ECHO "$libext" | $SED "$delay_single_quote_subst"`' -shrext_cmds='`$ECHO "$shrext_cmds" | $SED "$delay_single_quote_subst"`' -extract_expsyms_cmds='`$ECHO "$extract_expsyms_cmds" | $SED "$delay_single_quote_subst"`' -archive_cmds_need_lc='`$ECHO "$archive_cmds_need_lc" | $SED "$delay_single_quote_subst"`' -enable_shared_with_static_runtimes='`$ECHO "$enable_shared_with_static_runtimes" | $SED "$delay_single_quote_subst"`' -export_dynamic_flag_spec='`$ECHO "$export_dynamic_flag_spec" | $SED "$delay_single_quote_subst"`' -whole_archive_flag_spec='`$ECHO "$whole_archive_flag_spec" | $SED "$delay_single_quote_subst"`' -compiler_needs_object='`$ECHO "$compiler_needs_object" | $SED "$delay_single_quote_subst"`' -old_archive_from_new_cmds='`$ECHO "$old_archive_from_new_cmds" | $SED "$delay_single_quote_subst"`' -old_archive_from_expsyms_cmds='`$ECHO "$old_archive_from_expsyms_cmds" | $SED "$delay_single_quote_subst"`' -archive_cmds='`$ECHO "$archive_cmds" | $SED "$delay_single_quote_subst"`' -archive_expsym_cmds='`$ECHO "$archive_expsym_cmds" | $SED "$delay_single_quote_subst"`' -module_cmds='`$ECHO "$module_cmds" | $SED "$delay_single_quote_subst"`' -module_expsym_cmds='`$ECHO "$module_expsym_cmds" | $SED "$delay_single_quote_subst"`' -with_gnu_ld='`$ECHO "$with_gnu_ld" | $SED "$delay_single_quote_subst"`' -allow_undefined_flag='`$ECHO "$allow_undefined_flag" | $SED "$delay_single_quote_subst"`' -no_undefined_flag='`$ECHO "$no_undefined_flag" | $SED "$delay_single_quote_subst"`' -hardcode_libdir_flag_spec='`$ECHO "$hardcode_libdir_flag_spec" | $SED "$delay_single_quote_subst"`' -hardcode_libdir_flag_spec_ld='`$ECHO "$hardcode_libdir_flag_spec_ld" | $SED "$delay_single_quote_subst"`' -hardcode_libdir_separator='`$ECHO "$hardcode_libdir_separator" | $SED "$delay_single_quote_subst"`' -hardcode_direct='`$ECHO "$hardcode_direct" | $SED "$delay_single_quote_subst"`' -hardcode_direct_absolute='`$ECHO "$hardcode_direct_absolute" | $SED "$delay_single_quote_subst"`' -hardcode_minus_L='`$ECHO "$hardcode_minus_L" | $SED "$delay_single_quote_subst"`' -hardcode_shlibpath_var='`$ECHO "$hardcode_shlibpath_var" | $SED "$delay_single_quote_subst"`' -hardcode_automatic='`$ECHO "$hardcode_automatic" | $SED "$delay_single_quote_subst"`' -inherit_rpath='`$ECHO "$inherit_rpath" | $SED "$delay_single_quote_subst"`' -link_all_deplibs='`$ECHO "$link_all_deplibs" | $SED "$delay_single_quote_subst"`' -always_export_symbols='`$ECHO "$always_export_symbols" | $SED "$delay_single_quote_subst"`' -export_symbols_cmds='`$ECHO "$export_symbols_cmds" | $SED "$delay_single_quote_subst"`' -exclude_expsyms='`$ECHO "$exclude_expsyms" | $SED "$delay_single_quote_subst"`' -include_expsyms='`$ECHO "$include_expsyms" | $SED "$delay_single_quote_subst"`' -prelink_cmds='`$ECHO "$prelink_cmds" | $SED "$delay_single_quote_subst"`' -postlink_cmds='`$ECHO "$postlink_cmds" | $SED "$delay_single_quote_subst"`' -file_list_spec='`$ECHO "$file_list_spec" | $SED "$delay_single_quote_subst"`' -variables_saved_for_relink='`$ECHO "$variables_saved_for_relink" | $SED "$delay_single_quote_subst"`' -need_lib_prefix='`$ECHO "$need_lib_prefix" | $SED "$delay_single_quote_subst"`' -need_version='`$ECHO "$need_version" | $SED "$delay_single_quote_subst"`' -version_type='`$ECHO "$version_type" | $SED "$delay_single_quote_subst"`' -runpath_var='`$ECHO "$runpath_var" | $SED "$delay_single_quote_subst"`' -shlibpath_var='`$ECHO "$shlibpath_var" | $SED "$delay_single_quote_subst"`' -shlibpath_overrides_runpath='`$ECHO "$shlibpath_overrides_runpath" | $SED "$delay_single_quote_subst"`' -libname_spec='`$ECHO "$libname_spec" | $SED "$delay_single_quote_subst"`' -library_names_spec='`$ECHO "$library_names_spec" | $SED "$delay_single_quote_subst"`' -soname_spec='`$ECHO "$soname_spec" | $SED "$delay_single_quote_subst"`' -install_override_mode='`$ECHO "$install_override_mode" | $SED "$delay_single_quote_subst"`' -postinstall_cmds='`$ECHO "$postinstall_cmds" | $SED "$delay_single_quote_subst"`' -postuninstall_cmds='`$ECHO "$postuninstall_cmds" | $SED "$delay_single_quote_subst"`' -finish_cmds='`$ECHO "$finish_cmds" | $SED "$delay_single_quote_subst"`' -finish_eval='`$ECHO "$finish_eval" | $SED "$delay_single_quote_subst"`' -hardcode_into_libs='`$ECHO "$hardcode_into_libs" | $SED "$delay_single_quote_subst"`' -sys_lib_search_path_spec='`$ECHO "$sys_lib_search_path_spec" | $SED "$delay_single_quote_subst"`' -sys_lib_dlsearch_path_spec='`$ECHO "$sys_lib_dlsearch_path_spec" | $SED "$delay_single_quote_subst"`' -hardcode_action='`$ECHO "$hardcode_action" | $SED "$delay_single_quote_subst"`' -enable_dlopen='`$ECHO "$enable_dlopen" | $SED "$delay_single_quote_subst"`' -enable_dlopen_self='`$ECHO "$enable_dlopen_self" | $SED "$delay_single_quote_subst"`' -enable_dlopen_self_static='`$ECHO "$enable_dlopen_self_static" | $SED "$delay_single_quote_subst"`' -old_striplib='`$ECHO "$old_striplib" | $SED "$delay_single_quote_subst"`' -striplib='`$ECHO "$striplib" | $SED "$delay_single_quote_subst"`' - -LTCC='$LTCC' -LTCFLAGS='$LTCFLAGS' -compiler='$compiler_DEFAULT' - -# A function that is used when there is no print builtin or printf. -func_fallback_echo () -{ - eval 'cat <<_LTECHO_EOF -\$1 -_LTECHO_EOF' -} - -# Quote evaled strings. -for var in SHELL \ -ECHO \ -SED \ -GREP \ -EGREP \ -FGREP \ -LD \ -NM \ -LN_S \ -lt_SP2NL \ -lt_NL2SP \ -reload_flag \ -OBJDUMP \ -deplibs_check_method \ -file_magic_cmd \ -file_magic_glob \ -want_nocaseglob \ -DLLTOOL \ -sharedlib_from_linklib_cmd \ -AR \ -AR_FLAGS \ -archiver_list_spec \ -STRIP \ -RANLIB \ -CC \ -CFLAGS \ -compiler \ -lt_cv_sys_global_symbol_pipe \ -lt_cv_sys_global_symbol_to_cdecl \ -lt_cv_sys_global_symbol_to_c_name_address \ -lt_cv_sys_global_symbol_to_c_name_address_lib_prefix \ -nm_file_list_spec \ -lt_prog_compiler_no_builtin_flag \ -lt_prog_compiler_pic \ -lt_prog_compiler_wl \ -lt_prog_compiler_static \ -lt_cv_prog_compiler_c_o \ -need_locks \ -MANIFEST_TOOL \ -DSYMUTIL \ -NMEDIT \ -LIPO \ -OTOOL \ -OTOOL64 \ -shrext_cmds \ -export_dynamic_flag_spec \ -whole_archive_flag_spec \ -compiler_needs_object \ -with_gnu_ld \ -allow_undefined_flag \ -no_undefined_flag \ -hardcode_libdir_flag_spec \ -hardcode_libdir_flag_spec_ld \ -hardcode_libdir_separator \ -exclude_expsyms \ -include_expsyms \ -file_list_spec \ -variables_saved_for_relink \ -libname_spec \ -library_names_spec \ -soname_spec \ -install_override_mode \ -finish_eval \ -old_striplib \ -striplib; do - case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in - *[\\\\\\\`\\"\\\$]*) - eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED \\"\\\$sed_quote_subst\\"\\\`\\\\\\"" - ;; - *) - eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\"" - ;; - esac -done - -# Double-quote double-evaled strings. -for var in reload_cmds \ -old_postinstall_cmds \ -old_postuninstall_cmds \ -old_archive_cmds \ -extract_expsyms_cmds \ -old_archive_from_new_cmds \ -old_archive_from_expsyms_cmds \ -archive_cmds \ -archive_expsym_cmds \ -module_cmds \ -module_expsym_cmds \ -export_symbols_cmds \ -prelink_cmds \ -postlink_cmds \ -postinstall_cmds \ -postuninstall_cmds \ -finish_cmds \ -sys_lib_search_path_spec \ -sys_lib_dlsearch_path_spec; do - case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in - *[\\\\\\\`\\"\\\$]*) - eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\"" - ;; - *) - eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\"" - ;; - esac -done - -ac_aux_dir='$ac_aux_dir' -xsi_shell='$xsi_shell' -lt_shell_append='$lt_shell_append' - -# See if we are running on zsh, and set the options which allow our -# commands through without removal of \ escapes INIT. -if test -n "\${ZSH_VERSION+set}" ; then - setopt NO_GLOB_SUBST -fi - - - PACKAGE='$PACKAGE' - VERSION='$VERSION' - TIMESTAMP='$TIMESTAMP' - RM='$RM' - ofile='$ofile' - - - - -_ACEOF - -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 - -# Handling of arguments. -for ac_config_target in $ac_config_targets -do - case $ac_config_target in - "config.h") CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;; - "depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;; - "libtool") CONFIG_COMMANDS="$CONFIG_COMMANDS libtool" ;; - "${OUTPUT_FILES}") CONFIG_FILES="$CONFIG_FILES ${OUTPUT_FILES}" ;; - "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;; - "src/Makefile") CONFIG_FILES="$CONFIG_FILES src/Makefile" ;; - - *) as_fn_error $? "invalid argument: \`$ac_config_target'" "$LINENO" 5;; - esac -done - - -# If the user did not use the arguments to specify the items to instantiate, -# then the envvar interface is used. Set only those that are not. -# We use the long form for the default assignment because of an extremely -# bizarre bug on SunOS 4.1.3. -if $ac_need_defaults; then - test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files - test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers - test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands -fi - -# Have a temporary directory for convenience. Make it in the build tree -# simply because there is no reason against having it here, and in addition, -# creating and moving files from /tmp can sometimes cause problems. -# Hook for its removal unless debugging. -# Note that there is a small window in which the directory will not be cleaned: -# after its creation but before its name has been assigned to `$tmp'. -$debug || -{ - tmp= ac_tmp= - trap 'exit_status=$? - : "${ac_tmp:=$tmp}" - { test ! -d "$ac_tmp" || rm -fr "$ac_tmp"; } && exit $exit_status -' 0 - trap 'as_fn_exit 1' 1 2 13 15 -} -# Create a (secure) tmp directory for tmp files. - -{ - tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` && - test -d "$tmp" -} || -{ - tmp=./conf$$-$RANDOM - (umask 077 && mkdir "$tmp") -} || as_fn_error $? "cannot create a temporary directory in ." "$LINENO" 5 -ac_tmp=$tmp - -# Set up the scripts for CONFIG_FILES section. -# No need to generate them if there are no CONFIG_FILES. -# This happens for instance with `./config.status config.h'. -if test -n "$CONFIG_FILES"; then - - -ac_cr=`echo X | tr X '\015'` -# On cygwin, bash can eat \r inside `` if the user requested igncr. -# But we know of no other shell where ac_cr would be empty at this -# point, so we can use a bashism as a fallback. -if test "x$ac_cr" = x; then - eval ac_cr=\$\'\\r\' -fi -ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' /dev/null` -if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then - ac_cs_awk_cr='\\r' -else - ac_cs_awk_cr=$ac_cr -fi - -echo 'BEGIN {' >"$ac_tmp/subs1.awk" && -_ACEOF - - -{ - echo "cat >conf$$subs.awk <<_ACEOF" && - echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' && - echo "_ACEOF" -} >conf$$subs.sh || - as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 -ac_delim_num=`echo "$ac_subst_vars" | grep -c '^'` -ac_delim='%!_!# ' -for ac_last_try in false false false false false :; do - . ./conf$$subs.sh || - as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 - - ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X` - if test $ac_delim_n = $ac_delim_num; then - break - elif $ac_last_try; then - as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 - else - ac_delim="$ac_delim!$ac_delim _$ac_delim!! " - fi -done -rm -f conf$$subs.sh - -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -cat >>"\$ac_tmp/subs1.awk" <<\\_ACAWK && -_ACEOF -sed -n ' -h -s/^/S["/; s/!.*/"]=/ -p -g -s/^[^!]*!// -:repl -t repl -s/'"$ac_delim"'$// -t delim -:nl -h -s/\(.\{148\}\)..*/\1/ -t more1 -s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/ -p -n -b repl -:more1 -s/["\\]/\\&/g; s/^/"/; s/$/"\\/ -p -g -s/.\{148\}// -t nl -:delim -h -s/\(.\{148\}\)..*/\1/ -t more2 -s/["\\]/\\&/g; s/^/"/; s/$/"/ -p -b -:more2 -s/["\\]/\\&/g; s/^/"/; s/$/"\\/ -p -g -s/.\{148\}// -t delim -' >$CONFIG_STATUS || ac_write_fail=1 -rm -f conf$$subs.awk -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -_ACAWK -cat >>"\$ac_tmp/subs1.awk" <<_ACAWK && - for (key in S) S_is_set[key] = 1 - FS = "" - -} -{ - line = $ 0 - nfields = split(line, field, "@") - substed = 0 - len = length(field[1]) - for (i = 2; i < nfields; i++) { - key = field[i] - keylen = length(key) - if (S_is_set[key]) { - value = S[key] - line = substr(line, 1, len) "" value "" substr(line, len + keylen + 3) - len += length(value) + length(field[++i]) - substed = 1 - } else - len += 1 + keylen - } - - print line -} - -_ACAWK -_ACEOF -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then - sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g" -else - cat -fi < "$ac_tmp/subs1.awk" > "$ac_tmp/subs.awk" \ - || as_fn_error $? "could not setup config files machinery" "$LINENO" 5 -_ACEOF - -# VPATH may cause trouble with some makes, so we remove sole $(srcdir), -# ${srcdir} and @srcdir@ entries from VPATH if srcdir is ".", strip leading and -# trailing colons and then remove the whole line if VPATH becomes empty -# (actually we leave an empty line to preserve line numbers). -if test "x$srcdir" = x.; then - ac_vpsub='/^[ ]*VPATH[ ]*=[ ]*/{ -h -s/// -s/^/:/ -s/[ ]*$/:/ -s/:\$(srcdir):/:/g -s/:\${srcdir}:/:/g -s/:@srcdir@:/:/g -s/^:*// -s/:*$// -x -s/\(=[ ]*\).*/\1/ -G -s/\n// -s/^[^=]*=[ ]*$// -}' -fi - -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -fi # test -n "$CONFIG_FILES" - -# Set up the scripts for CONFIG_HEADERS section. -# No need to generate them if there are no CONFIG_HEADERS. -# This happens for instance with `./config.status Makefile'. -if test -n "$CONFIG_HEADERS"; then -cat >"$ac_tmp/defines.awk" <<\_ACAWK || -BEGIN { -_ACEOF - -# Transform confdefs.h into an awk script `defines.awk', embedded as -# here-document in config.status, that substitutes the proper values into -# config.h.in to produce config.h. - -# Create a delimiter string that does not exist in confdefs.h, to ease -# handling of long lines. -ac_delim='%!_!# ' -for ac_last_try in false false :; do - ac_tt=`sed -n "/$ac_delim/p" confdefs.h` - if test -z "$ac_tt"; then - break - elif $ac_last_try; then - as_fn_error $? "could not make $CONFIG_HEADERS" "$LINENO" 5 - else - ac_delim="$ac_delim!$ac_delim _$ac_delim!! " - fi -done - -# For the awk script, D is an array of macro values keyed by name, -# likewise P contains macro parameters if any. Preserve backslash -# newline sequences. - -ac_word_re=[_$as_cr_Letters][_$as_cr_alnum]* -sed -n ' -s/.\{148\}/&'"$ac_delim"'/g -t rset -:rset -s/^[ ]*#[ ]*define[ ][ ]*/ / -t def -d -:def -s/\\$// -t bsnl -s/["\\]/\\&/g -s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\ -D["\1"]=" \3"/p -s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2"/p -d -:bsnl -s/["\\]/\\&/g -s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\ -D["\1"]=" \3\\\\\\n"\\/p -t cont -s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2\\\\\\n"\\/p -t cont -d -:cont -n -s/.\{148\}/&'"$ac_delim"'/g -t clear -:clear -s/\\$// -t bsnlc -s/["\\]/\\&/g; s/^/"/; s/$/"/p -d -:bsnlc -s/["\\]/\\&/g; s/^/"/; s/$/\\\\\\n"\\/p -b cont -' >$CONFIG_STATUS || ac_write_fail=1 - -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 - for (key in D) D_is_set[key] = 1 - FS = "" -} -/^[\t ]*#[\t ]*(define|undef)[\t ]+$ac_word_re([\t (]|\$)/ { - line = \$ 0 - split(line, arg, " ") - if (arg[1] == "#") { - defundef = arg[2] - mac1 = arg[3] - } else { - defundef = substr(arg[1], 2) - mac1 = arg[2] - } - split(mac1, mac2, "(") #) - macro = mac2[1] - prefix = substr(line, 1, index(line, defundef) - 1) - if (D_is_set[macro]) { - # Preserve the white space surrounding the "#". - print prefix "define", macro P[macro] D[macro] - next - } else { - # Replace #undef with comments. This is necessary, for example, - # in the case of _POSIX_SOURCE, which is predefined and required - # on some systems where configure will not decide to define it. - if (defundef == "undef") { - print "/*", prefix defundef, macro, "*/" - next - } - } -} -{ print } -_ACAWK -_ACEOF -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 - as_fn_error $? "could not setup config headers machinery" "$LINENO" 5 -fi # test -n "$CONFIG_HEADERS" - - -eval set X " :F $CONFIG_FILES :H $CONFIG_HEADERS :C $CONFIG_COMMANDS" -shift -for ac_tag -do - case $ac_tag in - :[FHLC]) ac_mode=$ac_tag; continue;; - esac - case $ac_mode$ac_tag in - :[FHL]*:*);; - :L* | :C*:*) as_fn_error $? "invalid tag \`$ac_tag'" "$LINENO" 5;; - :[FH]-) ac_tag=-:-;; - :[FH]*) ac_tag=$ac_tag:$ac_tag.in;; - esac - ac_save_IFS=$IFS - IFS=: - set x $ac_tag - IFS=$ac_save_IFS - shift - ac_file=$1 - shift - - case $ac_mode in - :L) ac_source=$1;; - :[FH]) - ac_file_inputs= - for ac_f - do - case $ac_f in - -) ac_f="$ac_tmp/stdin";; - *) # Look for the file first in the build tree, then in the source tree - # (if the path is not absolute). The absolute path cannot be DOS-style, - # because $ac_f cannot contain `:'. - test -f "$ac_f" || - case $ac_f in - [\\/$]*) false;; - *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";; - esac || - as_fn_error 1 "cannot find input file: \`$ac_f'" "$LINENO" 5;; - esac - case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac - as_fn_append ac_file_inputs " '$ac_f'" - done - - # Let's still pretend it is `configure' which instantiates (i.e., don't - # use $as_me), people would be surprised to read: - # /* config.h. Generated by config.status. */ - configure_input='Generated from '` - $as_echo "$*" | sed 's|^[^:]*/||;s|:[^:]*/|, |g' - `' by configure.' - if test x"$ac_file" != x-; then - configure_input="$ac_file. $configure_input" - { $as_echo "$as_me:${as_lineno-$LINENO}: creating $ac_file" >&5 -$as_echo "$as_me: creating $ac_file" >&6;} - fi - # Neutralize special characters interpreted by sed in replacement strings. - case $configure_input in #( - *\&* | *\|* | *\\* ) - ac_sed_conf_input=`$as_echo "$configure_input" | - sed 's/[\\\\&|]/\\\\&/g'`;; #( - *) ac_sed_conf_input=$configure_input;; - esac - - case $ac_tag in - *:-:* | *:-) cat >"$ac_tmp/stdin" \ - || as_fn_error $? "could not create $ac_file" "$LINENO" 5 ;; - esac - ;; - esac - - ac_dir=`$as_dirname -- "$ac_file" || -$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$ac_file" : 'X\(//\)[^/]' \| \ - X"$ac_file" : 'X\(//\)$' \| \ - X"$ac_file" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X"$ac_file" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - as_dir="$ac_dir"; as_fn_mkdir_p - ac_builddir=. - -case "$ac_dir" in -.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; -*) - ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'` - # A ".." for each directory in $ac_dir_suffix. - ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` - case $ac_top_builddir_sub in - "") ac_top_builddir_sub=. ac_top_build_prefix= ;; - *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; - esac ;; -esac -ac_abs_top_builddir=$ac_pwd -ac_abs_builddir=$ac_pwd$ac_dir_suffix -# for backward compatibility: -ac_top_builddir=$ac_top_build_prefix - -case $srcdir in - .) # We are building in place. - ac_srcdir=. - ac_top_srcdir=$ac_top_builddir_sub - ac_abs_top_srcdir=$ac_pwd ;; - [\\/]* | ?:[\\/]* ) # Absolute name. - ac_srcdir=$srcdir$ac_dir_suffix; - ac_top_srcdir=$srcdir - ac_abs_top_srcdir=$srcdir ;; - *) # Relative name. - ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix - ac_top_srcdir=$ac_top_build_prefix$srcdir - ac_abs_top_srcdir=$ac_pwd/$srcdir ;; -esac -ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix - - - case $ac_mode in - :F) - # - # CONFIG_FILE - # - - case $INSTALL in - [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;; - *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;; - esac - ac_MKDIR_P=$MKDIR_P - case $MKDIR_P in - [\\/$]* | ?:[\\/]* ) ;; - */*) ac_MKDIR_P=$ac_top_build_prefix$MKDIR_P ;; - esac -_ACEOF - -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -# If the template does not know about datarootdir, expand it. -# FIXME: This hack should be removed a few years after 2.60. -ac_datarootdir_hack=; ac_datarootdir_seen= -ac_sed_dataroot=' -/datarootdir/ { - p - q -} -/@datadir@/p -/@docdir@/p -/@infodir@/p -/@localedir@/p -/@mandir@/p' -case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in -*datarootdir*) ac_datarootdir_seen=yes;; -*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*) - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5 -$as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;} -_ACEOF -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 - ac_datarootdir_hack=' - s&@datadir@&$datadir&g - s&@docdir@&$docdir&g - s&@infodir@&$infodir&g - s&@localedir@&$localedir&g - s&@mandir@&$mandir&g - s&\\\${datarootdir}&$datarootdir&g' ;; -esac -_ACEOF - -# Neutralize VPATH when `$srcdir' = `.'. -# Shell code in configure.ac might set extrasub. -# FIXME: do we really want to maintain this feature? -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -ac_sed_extra="$ac_vpsub -$extrasub -_ACEOF -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -:t -/@[a-zA-Z_][a-zA-Z_0-9]*@/!b -s|@configure_input@|$ac_sed_conf_input|;t t -s&@top_builddir@&$ac_top_builddir_sub&;t t -s&@top_build_prefix@&$ac_top_build_prefix&;t t -s&@srcdir@&$ac_srcdir&;t t -s&@abs_srcdir@&$ac_abs_srcdir&;t t -s&@top_srcdir@&$ac_top_srcdir&;t t -s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t -s&@builddir@&$ac_builddir&;t t -s&@abs_builddir@&$ac_abs_builddir&;t t -s&@abs_top_builddir@&$ac_abs_top_builddir&;t t -s&@INSTALL@&$ac_INSTALL&;t t -s&@MKDIR_P@&$ac_MKDIR_P&;t t -$ac_datarootdir_hack -" -eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$ac_tmp/subs.awk" \ - >$ac_tmp/out || as_fn_error $? "could not create $ac_file" "$LINENO" 5 - -test -z "$ac_datarootdir_hack$ac_datarootdir_seen" && - { ac_out=`sed -n '/\${datarootdir}/p' "$ac_tmp/out"`; test -n "$ac_out"; } && - { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' \ - "$ac_tmp/out"`; test -z "$ac_out"; } && - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a reference to the variable \`datarootdir' -which seems to be undefined. Please make sure it is defined" >&5 -$as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir' -which seems to be undefined. Please make sure it is defined" >&2;} - - rm -f "$ac_tmp/stdin" - case $ac_file in - -) cat "$ac_tmp/out" && rm -f "$ac_tmp/out";; - *) rm -f "$ac_file" && mv "$ac_tmp/out" "$ac_file";; - esac \ - || as_fn_error $? "could not create $ac_file" "$LINENO" 5 - ;; - :H) - # - # CONFIG_HEADER - # - if test x"$ac_file" != x-; then - { - $as_echo "/* $configure_input */" \ - && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs" - } >"$ac_tmp/config.h" \ - || as_fn_error $? "could not create $ac_file" "$LINENO" 5 - if diff "$ac_file" "$ac_tmp/config.h" >/dev/null 2>&1; then - { $as_echo "$as_me:${as_lineno-$LINENO}: $ac_file is unchanged" >&5 -$as_echo "$as_me: $ac_file is unchanged" >&6;} - else - rm -f "$ac_file" - mv "$ac_tmp/config.h" "$ac_file" \ - || as_fn_error $? "could not create $ac_file" "$LINENO" 5 - fi - else - $as_echo "/* $configure_input */" \ - && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs" \ - || as_fn_error $? "could not create -" "$LINENO" 5 - fi -# Compute "$ac_file"'s index in $config_headers. -_am_arg="$ac_file" -_am_stamp_count=1 -for _am_header in $config_headers :; do - case $_am_header in - $_am_arg | $_am_arg:* ) - break ;; - * ) - _am_stamp_count=`expr $_am_stamp_count + 1` ;; - esac -done -echo "timestamp for $_am_arg" >`$as_dirname -- "$_am_arg" || -$as_expr X"$_am_arg" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$_am_arg" : 'X\(//\)[^/]' \| \ - X"$_am_arg" : 'X\(//\)$' \| \ - X"$_am_arg" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X"$_am_arg" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'`/stamp-h$_am_stamp_count - ;; - - :C) { $as_echo "$as_me:${as_lineno-$LINENO}: executing $ac_file commands" >&5 -$as_echo "$as_me: executing $ac_file commands" >&6;} - ;; - esac - - - case $ac_file$ac_mode in - "depfiles":C) test x"$AMDEP_TRUE" != x"" || { - # Autoconf 2.62 quotes --file arguments for eval, but not when files - # are listed without --file. Let's play safe and only enable the eval - # if we detect the quoting. - case $CONFIG_FILES in - *\'*) eval set x "$CONFIG_FILES" ;; - *) set x $CONFIG_FILES ;; - esac - shift - for mf - do - # Strip MF so we end up with the name of the file. - mf=`echo "$mf" | sed -e 's/:.*$//'` - # Check whether this is an Automake generated Makefile or not. - # We used to match only the files named `Makefile.in', but - # some people rename them; so instead we look at the file content. - # Grep'ing the first line is not enough: some people post-process - # each Makefile.in and add a new line on top of each file to say so. - # Grep'ing the whole file is not good either: AIX grep has a line - # limit of 2048, but all sed's we know have understand at least 4000. - if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then - dirpart=`$as_dirname -- "$mf" || -$as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$mf" : 'X\(//\)[^/]' \| \ - X"$mf" : 'X\(//\)$' \| \ - X"$mf" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X"$mf" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - else - continue - fi - # Extract the definition of DEPDIR, am__include, and am__quote - # from the Makefile without running `make'. - DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` - test -z "$DEPDIR" && continue - am__include=`sed -n 's/^am__include = //p' < "$mf"` - test -z "am__include" && continue - am__quote=`sed -n 's/^am__quote = //p' < "$mf"` - # When using ansi2knr, U may be empty or an underscore; expand it - U=`sed -n 's/^U = //p' < "$mf"` - # Find all dependency output files, they are included files with - # $(DEPDIR) in their names. We invoke sed twice because it is the - # simplest approach to changing $(DEPDIR) to its actual value in the - # expansion. - for file in `sed -n " - s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ - sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do - # Make sure the directory exists. - test -f "$dirpart/$file" && continue - fdir=`$as_dirname -- "$file" || -$as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$file" : 'X\(//\)[^/]' \| \ - X"$file" : 'X\(//\)$' \| \ - X"$file" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X"$file" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - as_dir=$dirpart/$fdir; as_fn_mkdir_p - # echo "creating $dirpart/$file" - echo '# dummy' > "$dirpart/$file" - done - done -} - ;; - "libtool":C) - - # See if we are running on zsh, and set the options which allow our - # commands through without removal of \ escapes. - if test -n "${ZSH_VERSION+set}" ; then - setopt NO_GLOB_SUBST - fi - - cfgfile="${ofile}T" - trap "$RM \"$cfgfile\"; exit 1" 1 2 15 - $RM "$cfgfile" - - cat <<_LT_EOF >> "$cfgfile" -#! $SHELL - -# `$ECHO "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services. -# Generated automatically by $as_me ($PACKAGE$TIMESTAMP) $VERSION -# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: -# NOTE: Changes made to this file will be lost: look at ltmain.sh. -# -# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, -# 2006, 2007, 2008, 2009, 2010 Free Software Foundation, -# Inc. -# Written by Gordon Matzigkeit, 1996 -# -# This file is part of GNU Libtool. -# -# GNU Libtool is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# As a special exception to the GNU General Public License, -# if you distribute this file as part of a program or library that -# is built using GNU Libtool, you may include this file under the -# same distribution terms that you use for the rest of that program. -# -# GNU Libtool is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with GNU Libtool; see the file COPYING. If not, a copy -# can be downloaded from http://www.gnu.org/licenses/gpl.html, or -# obtained by writing to the Free Software Foundation, Inc., -# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. - - -# The names of the tagged configurations supported by this script. -available_tags="" - -# ### BEGIN LIBTOOL CONFIG - -# Whether or not to build static libraries. -build_old_libs=$enable_static - -# Which release of libtool.m4 was used? -macro_version=$macro_version -macro_revision=$macro_revision - -# Whether or not to build shared libraries. -build_libtool_libs=$enable_shared - -# What type of objects to build. -pic_mode=$pic_mode - -# Whether or not to optimize for fast installation. -fast_install=$enable_fast_install - -# Shell to use when invoking shell scripts. -SHELL=$lt_SHELL - -# An echo program that protects backslashes. -ECHO=$lt_ECHO - -# The host system. -host_alias=$host_alias -host=$host -host_os=$host_os - -# The build system. -build_alias=$build_alias -build=$build -build_os=$build_os - -# A sed program that does not truncate output. -SED=$lt_SED - -# Sed that helps us avoid accidentally triggering echo(1) options like -n. -Xsed="\$SED -e 1s/^X//" - -# A grep program that handles long lines. -GREP=$lt_GREP - -# An ERE matcher. -EGREP=$lt_EGREP - -# A literal string matcher. -FGREP=$lt_FGREP - -# A BSD- or MS-compatible name lister. -NM=$lt_NM - -# Whether we need soft or hard links. -LN_S=$lt_LN_S - -# What is the maximum length of a command? -max_cmd_len=$max_cmd_len - -# Object file suffix (normally "o"). -objext=$ac_objext - -# Executable file suffix (normally ""). -exeext=$exeext - -# whether the shell understands "unset". -lt_unset=$lt_unset - -# turn spaces into newlines. -SP2NL=$lt_lt_SP2NL - -# turn newlines into spaces. -NL2SP=$lt_lt_NL2SP - -# convert \$build file names to \$host format. -to_host_file_cmd=$lt_cv_to_host_file_cmd - -# convert \$build files to toolchain format. -to_tool_file_cmd=$lt_cv_to_tool_file_cmd - -# An object symbol dumper. -OBJDUMP=$lt_OBJDUMP - -# Method to check whether dependent libraries are shared objects. -deplibs_check_method=$lt_deplibs_check_method - -# Command to use when deplibs_check_method = "file_magic". -file_magic_cmd=$lt_file_magic_cmd - -# How to find potential files when deplibs_check_method = "file_magic". -file_magic_glob=$lt_file_magic_glob - -# Find potential files using nocaseglob when deplibs_check_method = "file_magic". -want_nocaseglob=$lt_want_nocaseglob - -# DLL creation program. -DLLTOOL=$lt_DLLTOOL - -# Command to associate shared and link libraries. -sharedlib_from_linklib_cmd=$lt_sharedlib_from_linklib_cmd - -# The archiver. -AR=$lt_AR - -# Flags to create an archive. -AR_FLAGS=$lt_AR_FLAGS - -# How to feed a file listing to the archiver. -archiver_list_spec=$lt_archiver_list_spec - -# A symbol stripping program. -STRIP=$lt_STRIP - -# Commands used to install an old-style archive. -RANLIB=$lt_RANLIB -old_postinstall_cmds=$lt_old_postinstall_cmds -old_postuninstall_cmds=$lt_old_postuninstall_cmds - -# Whether to use a lock for old archive extraction. -lock_old_archive_extraction=$lock_old_archive_extraction - -# A C compiler. -LTCC=$lt_CC - -# LTCC compiler flags. -LTCFLAGS=$lt_CFLAGS - -# Take the output of nm and produce a listing of raw symbols and C names. -global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe - -# Transform the output of nm in a proper C declaration. -global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl - -# Transform the output of nm in a C name address pair. -global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address - -# Transform the output of nm in a C name address pair when lib prefix is needed. -global_symbol_to_c_name_address_lib_prefix=$lt_lt_cv_sys_global_symbol_to_c_name_address_lib_prefix - -# Specify filename containing input files for \$NM. -nm_file_list_spec=$lt_nm_file_list_spec - -# The root where to search for dependent libraries,and in which our libraries should be installed. -lt_sysroot=$lt_sysroot - -# The name of the directory that contains temporary libtool files. -objdir=$objdir - -# Used to examine libraries when file_magic_cmd begins with "file". -MAGIC_CMD=$MAGIC_CMD - -# Must we lock files when doing compilation? -need_locks=$lt_need_locks - -# Manifest tool. -MANIFEST_TOOL=$lt_MANIFEST_TOOL - -# Tool to manipulate archived DWARF debug symbol files on Mac OS X. -DSYMUTIL=$lt_DSYMUTIL - -# Tool to change global to local symbols on Mac OS X. -NMEDIT=$lt_NMEDIT - -# Tool to manipulate fat objects and archives on Mac OS X. -LIPO=$lt_LIPO - -# ldd/readelf like tool for Mach-O binaries on Mac OS X. -OTOOL=$lt_OTOOL - -# ldd/readelf like tool for 64 bit Mach-O binaries on Mac OS X 10.4. -OTOOL64=$lt_OTOOL64 - -# Old archive suffix (normally "a"). -libext=$libext - -# Shared library suffix (normally ".so"). -shrext_cmds=$lt_shrext_cmds - -# The commands to extract the exported symbol list from a shared archive. -extract_expsyms_cmds=$lt_extract_expsyms_cmds - -# Variables whose values should be saved in libtool wrapper scripts and -# restored at link time. -variables_saved_for_relink=$lt_variables_saved_for_relink - -# Do we need the "lib" prefix for modules? -need_lib_prefix=$need_lib_prefix - -# Do we need a version for libraries? -need_version=$need_version - -# Library versioning type. -version_type=$version_type - -# Shared library runtime path variable. -runpath_var=$runpath_var - -# Shared library path variable. -shlibpath_var=$shlibpath_var - -# Is shlibpath searched before the hard-coded library search path? -shlibpath_overrides_runpath=$shlibpath_overrides_runpath - -# Format of library name prefix. -libname_spec=$lt_libname_spec - -# List of archive names. First name is the real one, the rest are links. -# The last name is the one that the linker finds with -lNAME -library_names_spec=$lt_library_names_spec - -# The coded name of the library, if different from the real name. -soname_spec=$lt_soname_spec - -# Permission mode override for installation of shared libraries. -install_override_mode=$lt_install_override_mode - -# Command to use after installation of a shared archive. -postinstall_cmds=$lt_postinstall_cmds - -# Command to use after uninstallation of a shared archive. -postuninstall_cmds=$lt_postuninstall_cmds - -# Commands used to finish a libtool library installation in a directory. -finish_cmds=$lt_finish_cmds - -# As "finish_cmds", except a single script fragment to be evaled but -# not shown. -finish_eval=$lt_finish_eval - -# Whether we should hardcode library paths into libraries. -hardcode_into_libs=$hardcode_into_libs - -# Compile-time system search path for libraries. -sys_lib_search_path_spec=$lt_sys_lib_search_path_spec - -# Run-time system search path for libraries. -sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec - -# Whether dlopen is supported. -dlopen_support=$enable_dlopen - -# Whether dlopen of programs is supported. -dlopen_self=$enable_dlopen_self - -# Whether dlopen of statically linked programs is supported. -dlopen_self_static=$enable_dlopen_self_static - -# Commands to strip libraries. -old_striplib=$lt_old_striplib -striplib=$lt_striplib - - -# The linker used to build libraries. -LD=$lt_LD - -# How to create reloadable object files. -reload_flag=$lt_reload_flag -reload_cmds=$lt_reload_cmds - -# Commands used to build an old-style archive. -old_archive_cmds=$lt_old_archive_cmds - -# A language specific compiler. -CC=$lt_compiler - -# Is the compiler the GNU compiler? -with_gcc=$GCC - -# Compiler flag to turn off builtin functions. -no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag - -# Additional compiler flags for building library objects. -pic_flag=$lt_lt_prog_compiler_pic - -# How to pass a linker flag through the compiler. -wl=$lt_lt_prog_compiler_wl - -# Compiler flag to prevent dynamic linking. -link_static_flag=$lt_lt_prog_compiler_static - -# Does compiler simultaneously support -c and -o options? -compiler_c_o=$lt_lt_cv_prog_compiler_c_o - -# Whether or not to add -lc for building shared libraries. -build_libtool_need_lc=$archive_cmds_need_lc - -# Whether or not to disallow shared libs when runtime libs are static. -allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes - -# Compiler flag to allow reflexive dlopens. -export_dynamic_flag_spec=$lt_export_dynamic_flag_spec - -# Compiler flag to generate shared objects directly from archives. -whole_archive_flag_spec=$lt_whole_archive_flag_spec - -# Whether the compiler copes with passing no objects directly. -compiler_needs_object=$lt_compiler_needs_object - -# Create an old-style archive from a shared archive. -old_archive_from_new_cmds=$lt_old_archive_from_new_cmds - -# Create a temporary old-style archive to link instead of a shared archive. -old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds - -# Commands used to build a shared archive. -archive_cmds=$lt_archive_cmds -archive_expsym_cmds=$lt_archive_expsym_cmds - -# Commands used to build a loadable module if different from building -# a shared archive. -module_cmds=$lt_module_cmds -module_expsym_cmds=$lt_module_expsym_cmds - -# Whether we are building with GNU ld or not. -with_gnu_ld=$lt_with_gnu_ld - -# Flag that allows shared libraries with undefined symbols to be built. -allow_undefined_flag=$lt_allow_undefined_flag - -# Flag that enforces no undefined symbols. -no_undefined_flag=$lt_no_undefined_flag - -# Flag to hardcode \$libdir into a binary during linking. -# This must work even if \$libdir does not exist -hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec - -# If ld is used when linking, flag to hardcode \$libdir into a binary -# during linking. This must work even if \$libdir does not exist. -hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld - -# Whether we need a single "-rpath" flag with a separated argument. -hardcode_libdir_separator=$lt_hardcode_libdir_separator - -# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes -# DIR into the resulting binary. -hardcode_direct=$hardcode_direct - -# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes -# DIR into the resulting binary and the resulting library dependency is -# "absolute",i.e impossible to change by setting \${shlibpath_var} if the -# library is relocated. -hardcode_direct_absolute=$hardcode_direct_absolute - -# Set to "yes" if using the -LDIR flag during linking hardcodes DIR -# into the resulting binary. -hardcode_minus_L=$hardcode_minus_L - -# Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR -# into the resulting binary. -hardcode_shlibpath_var=$hardcode_shlibpath_var - -# Set to "yes" if building a shared library automatically hardcodes DIR -# into the library and all subsequent libraries and executables linked -# against it. -hardcode_automatic=$hardcode_automatic - -# Set to yes if linker adds runtime paths of dependent libraries -# to runtime path list. -inherit_rpath=$inherit_rpath - -# Whether libtool must link a program against all its dependency libraries. -link_all_deplibs=$link_all_deplibs - -# Set to "yes" if exported symbols are required. -always_export_symbols=$always_export_symbols - -# The commands to list exported symbols. -export_symbols_cmds=$lt_export_symbols_cmds - -# Symbols that should not be listed in the preloaded symbols. -exclude_expsyms=$lt_exclude_expsyms - -# Symbols that must always be exported. -include_expsyms=$lt_include_expsyms - -# Commands necessary for linking programs (against libraries) with templates. -prelink_cmds=$lt_prelink_cmds - -# Commands necessary for finishing linking programs. -postlink_cmds=$lt_postlink_cmds - -# Specify filename containing input files. -file_list_spec=$lt_file_list_spec - -# How to hardcode a shared library path into an executable. -hardcode_action=$hardcode_action - -# ### END LIBTOOL CONFIG - -_LT_EOF - - case $host_os in - aix3*) - cat <<\_LT_EOF >> "$cfgfile" -# AIX sometimes has problems with the GCC collect2 program. For some -# reason, if we set the COLLECT_NAMES environment variable, the problems -# vanish in a puff of smoke. -if test "X${COLLECT_NAMES+set}" != Xset; then - COLLECT_NAMES= - export COLLECT_NAMES -fi -_LT_EOF - ;; - esac - - -ltmain="$ac_aux_dir/ltmain.sh" - - - # We use sed instead of cat because bash on DJGPP gets confused if - # if finds mixed CR/LF and LF-only lines. Since sed operates in - # text mode, it properly converts lines to CR/LF. This bash problem - # is reportedly fixed, but why not run on old versions too? - sed '$q' "$ltmain" >> "$cfgfile" \ - || (rm -f "$cfgfile"; exit 1) - - if test x"$xsi_shell" = xyes; then - sed -e '/^func_dirname ()$/,/^} # func_dirname /c\ -func_dirname ()\ -{\ -\ case ${1} in\ -\ */*) func_dirname_result="${1%/*}${2}" ;;\ -\ * ) func_dirname_result="${3}" ;;\ -\ esac\ -} # Extended-shell func_dirname implementation' "$cfgfile" > $cfgfile.tmp \ - && mv -f "$cfgfile.tmp" "$cfgfile" \ - || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") -test 0 -eq $? || _lt_function_replace_fail=: - - - sed -e '/^func_basename ()$/,/^} # func_basename /c\ -func_basename ()\ -{\ -\ func_basename_result="${1##*/}"\ -} # Extended-shell func_basename implementation' "$cfgfile" > $cfgfile.tmp \ - && mv -f "$cfgfile.tmp" "$cfgfile" \ - || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") -test 0 -eq $? || _lt_function_replace_fail=: - - - sed -e '/^func_dirname_and_basename ()$/,/^} # func_dirname_and_basename /c\ -func_dirname_and_basename ()\ -{\ -\ case ${1} in\ -\ */*) func_dirname_result="${1%/*}${2}" ;;\ -\ * ) func_dirname_result="${3}" ;;\ -\ esac\ -\ func_basename_result="${1##*/}"\ -} # Extended-shell func_dirname_and_basename implementation' "$cfgfile" > $cfgfile.tmp \ - && mv -f "$cfgfile.tmp" "$cfgfile" \ - || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") -test 0 -eq $? || _lt_function_replace_fail=: - - - sed -e '/^func_stripname ()$/,/^} # func_stripname /c\ -func_stripname ()\ -{\ -\ # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are\ -\ # positional parameters, so assign one to ordinary parameter first.\ -\ func_stripname_result=${3}\ -\ func_stripname_result=${func_stripname_result#"${1}"}\ -\ func_stripname_result=${func_stripname_result%"${2}"}\ -} # Extended-shell func_stripname implementation' "$cfgfile" > $cfgfile.tmp \ - && mv -f "$cfgfile.tmp" "$cfgfile" \ - || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") -test 0 -eq $? || _lt_function_replace_fail=: - - - sed -e '/^func_split_long_opt ()$/,/^} # func_split_long_opt /c\ -func_split_long_opt ()\ -{\ -\ func_split_long_opt_name=${1%%=*}\ -\ func_split_long_opt_arg=${1#*=}\ -} # Extended-shell func_split_long_opt implementation' "$cfgfile" > $cfgfile.tmp \ - && mv -f "$cfgfile.tmp" "$cfgfile" \ - || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") -test 0 -eq $? || _lt_function_replace_fail=: - - - sed -e '/^func_split_short_opt ()$/,/^} # func_split_short_opt /c\ -func_split_short_opt ()\ -{\ -\ func_split_short_opt_arg=${1#??}\ -\ func_split_short_opt_name=${1%"$func_split_short_opt_arg"}\ -} # Extended-shell func_split_short_opt implementation' "$cfgfile" > $cfgfile.tmp \ - && mv -f "$cfgfile.tmp" "$cfgfile" \ - || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") -test 0 -eq $? || _lt_function_replace_fail=: - - - sed -e '/^func_lo2o ()$/,/^} # func_lo2o /c\ -func_lo2o ()\ -{\ -\ case ${1} in\ -\ *.lo) func_lo2o_result=${1%.lo}.${objext} ;;\ -\ *) func_lo2o_result=${1} ;;\ -\ esac\ -} # Extended-shell func_lo2o implementation' "$cfgfile" > $cfgfile.tmp \ - && mv -f "$cfgfile.tmp" "$cfgfile" \ - || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") -test 0 -eq $? || _lt_function_replace_fail=: - - - sed -e '/^func_xform ()$/,/^} # func_xform /c\ -func_xform ()\ -{\ - func_xform_result=${1%.*}.lo\ -} # Extended-shell func_xform implementation' "$cfgfile" > $cfgfile.tmp \ - && mv -f "$cfgfile.tmp" "$cfgfile" \ - || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") -test 0 -eq $? || _lt_function_replace_fail=: - - - sed -e '/^func_arith ()$/,/^} # func_arith /c\ -func_arith ()\ -{\ - func_arith_result=$(( $* ))\ -} # Extended-shell func_arith implementation' "$cfgfile" > $cfgfile.tmp \ - && mv -f "$cfgfile.tmp" "$cfgfile" \ - || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") -test 0 -eq $? || _lt_function_replace_fail=: - - - sed -e '/^func_len ()$/,/^} # func_len /c\ -func_len ()\ -{\ - func_len_result=${#1}\ -} # Extended-shell func_len implementation' "$cfgfile" > $cfgfile.tmp \ - && mv -f "$cfgfile.tmp" "$cfgfile" \ - || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") -test 0 -eq $? || _lt_function_replace_fail=: - -fi - -if test x"$lt_shell_append" = xyes; then - sed -e '/^func_append ()$/,/^} # func_append /c\ -func_append ()\ -{\ - eval "${1}+=\\${2}"\ -} # Extended-shell func_append implementation' "$cfgfile" > $cfgfile.tmp \ - && mv -f "$cfgfile.tmp" "$cfgfile" \ - || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") -test 0 -eq $? || _lt_function_replace_fail=: - - - sed -e '/^func_append_quoted ()$/,/^} # func_append_quoted /c\ -func_append_quoted ()\ -{\ -\ func_quote_for_eval "${2}"\ -\ eval "${1}+=\\\\ \\$func_quote_for_eval_result"\ -} # Extended-shell func_append_quoted implementation' "$cfgfile" > $cfgfile.tmp \ - && mv -f "$cfgfile.tmp" "$cfgfile" \ - || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") -test 0 -eq $? || _lt_function_replace_fail=: - - - # Save a `func_append' function call where possible by direct use of '+=' - sed -e 's%func_append \([a-zA-Z_]\{1,\}\) "%\1+="%g' $cfgfile > $cfgfile.tmp \ - && mv -f "$cfgfile.tmp" "$cfgfile" \ - || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") - test 0 -eq $? || _lt_function_replace_fail=: -else - # Save a `func_append' function call even when '+=' is not available - sed -e 's%func_append \([a-zA-Z_]\{1,\}\) "%\1="$\1%g' $cfgfile > $cfgfile.tmp \ - && mv -f "$cfgfile.tmp" "$cfgfile" \ - || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") - test 0 -eq $? || _lt_function_replace_fail=: -fi - -if test x"$_lt_function_replace_fail" = x":"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Unable to substitute extended shell functions in $ofile" >&5 -$as_echo "$as_me: WARNING: Unable to substitute extended shell functions in $ofile" >&2;} -fi - - - mv -f "$cfgfile" "$ofile" || - (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile") - chmod +x "$ofile" - - ;; - - esac -done # for ac_tag - - -as_fn_exit 0 -_ACEOF -ac_clean_files=$ac_clean_files_save - -test $ac_write_fail = 0 || - as_fn_error $? "write failure creating $CONFIG_STATUS" "$LINENO" 5 - - -# configure is writing to config.log, and then calls config.status. -# config.status does its own redirection, appending to config.log. -# Unfortunately, on DOS this fails, as config.log is still kept open -# by configure, so config.status won't be able to write to it; its -# output is simply discarded. So we exec the FD to /dev/null, -# effectively closing config.log, so it can be properly (re)opened and -# appended to by config.status. When coming back to configure, we -# need to make the FD available again. -if test "$no_create" != yes; then - ac_cs_success=: - ac_config_status_args= - test "$silent" = yes && - ac_config_status_args="$ac_config_status_args --quiet" - exec 5>/dev/null - $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false - exec 5>>config.log - # Use ||, not &&, to avoid exiting from the if with $? = 1, which - # would make configure fail if this is the last instruction. - $ac_cs_success || as_fn_exit 1 -fi -if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: unrecognized options: $ac_unrecognized_opts" >&5 -$as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2;} -fi - -cat >confcache <<\_ACEOF -# This file is a shell script that caches the results of configure -# tests run on this system so they can be shared between configure -# scripts and configure runs, see configure's option --config-cache. -# It is not useful on other systems. If it contains results you don't -# want to keep, you may remove or edit it. -# -# config.status only pays attention to the cache file if you give it -# the --recheck option to rerun configure. -# -# `ac_cv_env_foo' variables (set or unset) will be overridden when -# loading this file, other *unset* `ac_cv_foo' will be assigned the -# following values. - -_ACEOF - -# The following way of writing the cache mishandles newlines in values, -# but we know of no workaround that is simple, portable, and efficient. -# So, we kill variables containing newlines. -# Ultrix sh set writes to stderr and can't be redirected directly, -# and sets the high bit in the cache file unless we assign to the vars. -( - for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do - eval ac_val=\$$ac_var - case $ac_val in #( - *${as_nl}*) - case $ac_var in #( - *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5 -$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;; - esac - case $ac_var in #( - _ | IFS | as_nl) ;; #( - BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #( - *) { eval $ac_var=; unset $ac_var;} ;; - esac ;; - esac - done - - (set) 2>&1 | - case $as_nl`(ac_space=' '; set) 2>&1` in #( - *${as_nl}ac_space=\ *) - # `set' does not quote correctly, so add quotes: double-quote - # substitution turns \\\\ into \\, and sed turns \\ into \. - sed -n \ - "s/'/'\\\\''/g; - s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p" - ;; #( - *) - # `set' quotes correctly as required by POSIX, so do not add quotes. - sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" - ;; - esac | - sort -) | - sed ' - /^ac_cv_env_/b end - t clear - :clear - s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/ - t end - s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/ - :end' >>confcache -if diff "$cache_file" confcache >/dev/null 2>&1; then :; else - if test -w "$cache_file"; then - if test "x$cache_file" != "x/dev/null"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: updating cache $cache_file" >&5 -$as_echo "$as_me: updating cache $cache_file" >&6;} - if test ! -f "$cache_file" || test -h "$cache_file"; then - cat confcache >"$cache_file" - else - case $cache_file in #( - */* | ?:*) - mv -f confcache "$cache_file"$$ && - mv -f "$cache_file"$$ "$cache_file" ;; #( - *) - mv -f confcache "$cache_file" ;; - esac - fi - fi - else - { $as_echo "$as_me:${as_lineno-$LINENO}: not updating unwritable cache $cache_file" >&5 -$as_echo "$as_me: not updating unwritable cache $cache_file" >&6;} - fi -fi -rm -f confcache - -test "x$prefix" = xNONE && prefix=$ac_default_prefix -# Let make expand exec_prefix. -test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' - -DEFS=-DHAVE_CONFIG_H - -ac_libobjs= -ac_ltlibobjs= -U= -for ac_i in : $LIB@&t@OBJS; do test "x$ac_i" = x: && continue - # 1. Remove the extension, and $U if already installed. - ac_script='s/\$U\././;s/\.o$//;s/\.obj$//' - ac_i=`$as_echo "$ac_i" | sed "$ac_script"` - # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR - # will be set to the directory where LIBOBJS objects are built. - as_fn_append ac_libobjs " \${LIBOBJDIR}$ac_i\$U.$ac_objext" - as_fn_append ac_ltlibobjs " \${LIBOBJDIR}$ac_i"'$U.lo' -done -LIB@&t@OBJS=$ac_libobjs - -LTLIBOBJS=$ac_ltlibobjs - - - if test -n "$EXEEXT"; then - am__EXEEXT_TRUE= - am__EXEEXT_FALSE='#' -else - am__EXEEXT_TRUE='#' - am__EXEEXT_FALSE= -fi - -if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then - as_fn_error $? "conditional \"AMDEP\" was never defined. -Usually this means the macro was only invoked conditionally." "$LINENO" 5 -fi -if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then - as_fn_error $? "conditional \"am__fastdepCC\" was never defined. -Usually this means the macro was only invoked conditionally." "$LINENO" 5 -fi -if test -z "${am__EXEEXT_TRUE}" && test -z "${am__EXEEXT_FALSE}"; then - as_fn_error $? "conditional \"am__EXEEXT\" was never defined. -Usually this means the macro was only invoked conditionally." "$LINENO" 5 -fi - -: "${CONFIG_STATUS=./config.status}" -ac_write_fail=0 -ac_clean_files_save=$ac_clean_files -ac_clean_files="$ac_clean_files $CONFIG_STATUS" -{ $as_echo "$as_me:${as_lineno-$LINENO}: creating $CONFIG_STATUS" >&5 -$as_echo "$as_me: creating $CONFIG_STATUS" >&6;} -as_write_fail=0 -cat >$CONFIG_STATUS <<_ASEOF || as_write_fail=1 -#! $SHELL -# Generated by $as_me. -# Run this file to recreate the current configuration. -# Compiler output produced by configure, useful for debugging -# configure, is in config.log if it exists. - -debug=false -ac_cs_recheck=false -ac_cs_silent=false - -SHELL=\${CONFIG_SHELL-$SHELL} -export SHELL -_ASEOF -cat >>$CONFIG_STATUS <<\_ASEOF || as_write_fail=1 -## -------------------- ## -## M4sh Initialization. ## -## -------------------- ## - -# Be more Bourne compatible -DUALCASE=1; export DUALCASE # for MKS sh -if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then : - emulate sh - NULLCMD=: - # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which - # is contrary to our usage. Disable this feature. - alias -g '${1+"$@"}'='"$@"' - setopt NO_GLOB_SUBST -else - case `(set -o) 2>/dev/null` in @%:@( - *posix*) : - set -o posix ;; @%:@( - *) : - ;; -esac -fi - - -as_nl=' -' -export as_nl -# Printing a long string crashes Solaris 7 /usr/bin/printf. -as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' -as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo -as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo -# Prefer a ksh shell builtin over an external printf program on Solaris, -# but without wasting forks for bash or zsh. -if test -z "$BASH_VERSION$ZSH_VERSION" \ - && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then - as_echo='print -r --' - as_echo_n='print -rn --' -elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then - as_echo='printf %s\n' - as_echo_n='printf %s' -else - if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then - as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"' - as_echo_n='/usr/ucb/echo -n' - else - as_echo_body='eval expr "X$1" : "X\\(.*\\)"' - as_echo_n_body='eval - arg=$1; - case $arg in @%:@( - *"$as_nl"*) - expr "X$arg" : "X\\(.*\\)$as_nl"; - arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;; - esac; - expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl" - ' - export as_echo_n_body - as_echo_n='sh -c $as_echo_n_body as_echo' - fi - export as_echo_body - as_echo='sh -c $as_echo_body as_echo' -fi - -# The user is always right. -if test "${PATH_SEPARATOR+set}" != set; then - PATH_SEPARATOR=: - (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { - (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || - PATH_SEPARATOR=';' - } -fi - - -# IFS -# We need space, tab and new line, in precisely that order. Quoting is -# there to prevent editors from complaining about space-tab. -# (If _AS_PATH_WALK were called with IFS unset, it would disable word -# splitting by setting IFS to empty value.) -IFS=" "" $as_nl" - -# Find who we are. Look in the path if we contain no directory separator. -as_myself= -case $0 in @%:@(( - *[\\/]* ) as_myself=$0 ;; - *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break - done -IFS=$as_save_IFS - - ;; -esac -# We did not find ourselves, most probably we were run as `sh COMMAND' -# in which case we are not to be found in the path. -if test "x$as_myself" = x; then - as_myself=$0 -fi -if test ! -f "$as_myself"; then - $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 - exit 1 -fi - -# Unset variables that we do not need and which cause bugs (e.g. in -# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1" -# suppresses any "Segmentation fault" message there. '((' could -# trigger a bug in pdksh 5.2.14. -for as_var in BASH_ENV ENV MAIL MAILPATH -do eval test x\${$as_var+set} = xset \ - && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || : -done -PS1='$ ' -PS2='> ' -PS4='+ ' - -# NLS nuisances. -LC_ALL=C -export LC_ALL -LANGUAGE=C -export LANGUAGE - -# CDPATH. -(unset CDPATH) >/dev/null 2>&1 && unset CDPATH - - -@%:@ as_fn_error STATUS ERROR [LINENO LOG_FD] -@%:@ ---------------------------------------- -@%:@ Output "`basename @S|@0`: error: ERROR" to stderr. If LINENO and LOG_FD are -@%:@ provided, also output the error to LOG_FD, referencing LINENO. Then exit the -@%:@ script with STATUS, using 1 if that was 0. -as_fn_error () -{ - as_status=$1; test $as_status -eq 0 && as_status=1 - if test "$4"; then - as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4 - fi - $as_echo "$as_me: error: $2" >&2 - as_fn_exit $as_status -} @%:@ as_fn_error - - -@%:@ as_fn_set_status STATUS -@%:@ ----------------------- -@%:@ Set @S|@? to STATUS, without forking. -as_fn_set_status () -{ - return $1 -} @%:@ as_fn_set_status - -@%:@ as_fn_exit STATUS -@%:@ ----------------- -@%:@ Exit the shell with STATUS, even in a "trap 0" or "set -e" context. -as_fn_exit () -{ - set +e - as_fn_set_status $1 - exit $1 -} @%:@ as_fn_exit - -@%:@ as_fn_unset VAR -@%:@ --------------- -@%:@ Portably unset VAR. -as_fn_unset () -{ - { eval $1=; unset $1;} -} -as_unset=as_fn_unset -@%:@ as_fn_append VAR VALUE -@%:@ ---------------------- -@%:@ Append the text in VALUE to the end of the definition contained in VAR. Take -@%:@ advantage of any shell optimizations that allow amortized linear growth over -@%:@ repeated appends, instead of the typical quadratic growth present in naive -@%:@ implementations. -if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then : - eval 'as_fn_append () - { - eval $1+=\$2 - }' -else - as_fn_append () - { - eval $1=\$$1\$2 - } -fi # as_fn_append - -@%:@ as_fn_arith ARG... -@%:@ ------------------ -@%:@ Perform arithmetic evaluation on the ARGs, and store the result in the -@%:@ global @S|@as_val. Take advantage of shells that can avoid forks. The arguments -@%:@ must be portable across @S|@(()) and expr. -if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then : - eval 'as_fn_arith () - { - as_val=$(( $* )) - }' -else - as_fn_arith () - { - as_val=`expr "$@" || test $? -eq 1` - } -fi # as_fn_arith - - -if expr a : '\(a\)' >/dev/null 2>&1 && - test "X`expr 00001 : '.*\(...\)'`" = X001; then - as_expr=expr -else - as_expr=false -fi - -if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then - as_basename=basename -else - as_basename=false -fi - -if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then - as_dirname=dirname -else - as_dirname=false -fi - -as_me=`$as_basename -- "$0" || -$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ - X"$0" : 'X\(//\)$' \| \ - X"$0" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X/"$0" | - sed '/^.*\/\([^/][^/]*\)\/*$/{ - s//\1/ - q - } - /^X\/\(\/\/\)$/{ - s//\1/ - q - } - /^X\/\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - -# Avoid depending upon Character Ranges. -as_cr_letters='abcdefghijklmnopqrstuvwxyz' -as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' -as_cr_Letters=$as_cr_letters$as_cr_LETTERS -as_cr_digits='0123456789' -as_cr_alnum=$as_cr_Letters$as_cr_digits - -ECHO_C= ECHO_N= ECHO_T= -case `echo -n x` in @%:@((((( --n*) - case `echo 'xy\c'` in - *c*) ECHO_T=' ';; # ECHO_T is single tab character. - xy) ECHO_C='\c';; - *) echo `echo ksh88 bug on AIX 6.1` > /dev/null - ECHO_T=' ';; - esac;; -*) - ECHO_N='-n';; -esac - -rm -f conf$$ conf$$.exe conf$$.file -if test -d conf$$.dir; then - rm -f conf$$.dir/conf$$.file -else - rm -f conf$$.dir - mkdir conf$$.dir 2>/dev/null -fi -if (echo >conf$$.file) 2>/dev/null; then - if ln -s conf$$.file conf$$ 2>/dev/null; then - as_ln_s='ln -s' - # ... but there are two gotchas: - # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. - # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. - # In both cases, we have to default to `cp -p'. - ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || - as_ln_s='cp -p' - elif ln conf$$.file conf$$ 2>/dev/null; then - as_ln_s=ln - else - as_ln_s='cp -p' - fi -else - as_ln_s='cp -p' -fi -rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file -rmdir conf$$.dir 2>/dev/null - - -@%:@ as_fn_mkdir_p -@%:@ ------------- -@%:@ Create "@S|@as_dir" as a directory, including parents if necessary. -as_fn_mkdir_p () -{ - - case $as_dir in #( - -*) as_dir=./$as_dir;; - esac - test -d "$as_dir" || eval $as_mkdir_p || { - as_dirs= - while :; do - case $as_dir in #( - *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( - *) as_qdir=$as_dir;; - esac - as_dirs="'$as_qdir' $as_dirs" - as_dir=`$as_dirname -- "$as_dir" || -$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$as_dir" : 'X\(//\)[^/]' \| \ - X"$as_dir" : 'X\(//\)$' \| \ - X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X"$as_dir" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - test -d "$as_dir" && break - done - test -z "$as_dirs" || eval "mkdir $as_dirs" - } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir" - - -} @%:@ as_fn_mkdir_p -if mkdir -p . 2>/dev/null; then - as_mkdir_p='mkdir -p "$as_dir"' -else - test -d ./-p && rmdir ./-p - as_mkdir_p=false -fi - -if test -x / >/dev/null 2>&1; then - as_test_x='test -x' -else - if ls -dL / >/dev/null 2>&1; then - as_ls_L_option=L - else - as_ls_L_option= - fi - as_test_x=' - eval sh -c '\'' - if test -d "$1"; then - test -d "$1/."; - else - case $1 in @%:@( - -*)set "./$1";; - esac; - case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in @%:@(( - ???[sx]*):;;*)false;;esac;fi - '\'' sh - ' -fi -as_executable_p=$as_test_x - -# Sed expression to map a string onto a valid CPP name. -as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" - -# Sed expression to map a string onto a valid variable name. -as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" - - -exec 6>&1 -## ----------------------------------- ## -## Main body of $CONFIG_STATUS script. ## -## ----------------------------------- ## -_ASEOF -test $as_write_fail = 0 && chmod +x $CONFIG_STATUS || ac_write_fail=1 - -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -# Save the log message, to keep $0 and so on meaningful, and to -# report actual input values of CONFIG_FILES etc. instead of their -# values after options handling. -ac_log=" -This file was extended by shairport.c $as_me 1.2.0, which was -generated by GNU Autoconf 2.68. Invocation command line was - - CONFIG_FILES = $CONFIG_FILES - CONFIG_HEADERS = $CONFIG_HEADERS - CONFIG_LINKS = $CONFIG_LINKS - CONFIG_COMMANDS = $CONFIG_COMMANDS - $ $0 $@ - -on `(hostname || uname -n) 2>/dev/null | sed 1q` -" - -_ACEOF - -case $ac_config_files in *" -"*) set x $ac_config_files; shift; ac_config_files=$*;; -esac - -case $ac_config_headers in *" -"*) set x $ac_config_headers; shift; ac_config_headers=$*;; -esac - - -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -# Files that config.status was made for. -config_files="$ac_config_files" -config_headers="$ac_config_headers" -config_commands="$ac_config_commands" - -_ACEOF - -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -ac_cs_usage="\ -\`$as_me' instantiates files and other configuration actions -from templates according to the current configuration. Unless the files -and actions are specified as TAGs, all are instantiated by default. - -Usage: $0 [OPTION]... [TAG]... - - -h, --help print this help, then exit - -V, --version print version number and configuration settings, then exit - --config print configuration, then exit - -q, --quiet, --silent - do not print progress messages - -d, --debug don't remove temporary files - --recheck update $as_me by reconfiguring in the same conditions - --file=FILE[:TEMPLATE] - instantiate the configuration file FILE - --header=FILE[:TEMPLATE] - instantiate the configuration header FILE - -Configuration files: -$config_files - -Configuration headers: -$config_headers - -Configuration commands: -$config_commands - -Report bugs to ." - -_ACEOF -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`" -ac_cs_version="\\ -shairport.c config.status 1.2.0 -configured by $0, generated by GNU Autoconf 2.68, - with options \\"\$ac_cs_config\\" - -Copyright (C) 2010 Free Software Foundation, Inc. -This config.status script is free software; the Free Software Foundation -gives unlimited permission to copy, distribute and modify it." - -ac_pwd='$ac_pwd' -srcdir='$srcdir' -INSTALL='$INSTALL' -MKDIR_P='$MKDIR_P' -AWK='$AWK' -test -n "\$AWK" || AWK=awk -_ACEOF - -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -# The default lists apply if the user does not specify any file. -ac_need_defaults=: -while test $# != 0 -do - case $1 in - --*=?*) - ac_option=`expr "X$1" : 'X\([^=]*\)='` - ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'` - ac_shift=: - ;; - --*=) - ac_option=`expr "X$1" : 'X\([^=]*\)='` - ac_optarg= - ac_shift=: - ;; - *) - ac_option=$1 - ac_optarg=$2 - ac_shift=shift - ;; - esac - - case $ac_option in - # Handling of the options. - -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) - ac_cs_recheck=: ;; - --version | --versio | --versi | --vers | --ver | --ve | --v | -V ) - $as_echo "$ac_cs_version"; exit ;; - --config | --confi | --conf | --con | --co | --c ) - $as_echo "$ac_cs_config"; exit ;; - --debug | --debu | --deb | --de | --d | -d ) - debug=: ;; - --file | --fil | --fi | --f ) - $ac_shift - case $ac_optarg in - *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; - '') as_fn_error $? "missing file argument" ;; - esac - as_fn_append CONFIG_FILES " '$ac_optarg'" - ac_need_defaults=false;; - --header | --heade | --head | --hea ) - $ac_shift - case $ac_optarg in - *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; - esac - as_fn_append CONFIG_HEADERS " '$ac_optarg'" - ac_need_defaults=false;; - --he | --h) - # Conflict between --help and --header - as_fn_error $? "ambiguous option: \`$1' -Try \`$0 --help' for more information.";; - --help | --hel | -h ) - $as_echo "$ac_cs_usage"; exit ;; - -q | -quiet | --quiet | --quie | --qui | --qu | --q \ - | -silent | --silent | --silen | --sile | --sil | --si | --s) - ac_cs_silent=: ;; - - # This is an error. - -*) as_fn_error $? "unrecognized option: \`$1' -Try \`$0 --help' for more information." ;; - - *) as_fn_append ac_config_targets " $1" - ac_need_defaults=false ;; - - esac - shift -done - -ac_configure_extra_args= - -if $ac_cs_silent; then - exec 6>/dev/null - ac_configure_extra_args="$ac_configure_extra_args --silent" -fi - -_ACEOF -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -if \$ac_cs_recheck; then - set X '$SHELL' '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion - shift - \$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6 - CONFIG_SHELL='$SHELL' - export CONFIG_SHELL - exec "\$@" -fi - -_ACEOF -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -exec 5>>config.log -{ - echo - sed 'h;s/./-/g;s/^.../@%:@@%:@ /;s/...$/ @%:@@%:@/;p;x;p;x' <<_ASBOX -@%:@@%:@ Running $as_me. @%:@@%:@ -_ASBOX - $as_echo "$ac_log" -} >&5 - -_ACEOF -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -# -# INIT-COMMANDS -# -AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir" - - -# The HP-UX ksh and POSIX shell print the target directory to stdout -# if CDPATH is set. -(unset CDPATH) >/dev/null 2>&1 && unset CDPATH - -sed_quote_subst='$sed_quote_subst' -double_quote_subst='$double_quote_subst' -delay_variable_subst='$delay_variable_subst' -enable_static='`$ECHO "$enable_static" | $SED "$delay_single_quote_subst"`' -macro_version='`$ECHO "$macro_version" | $SED "$delay_single_quote_subst"`' -macro_revision='`$ECHO "$macro_revision" | $SED "$delay_single_quote_subst"`' -enable_shared='`$ECHO "$enable_shared" | $SED "$delay_single_quote_subst"`' -pic_mode='`$ECHO "$pic_mode" | $SED "$delay_single_quote_subst"`' -enable_fast_install='`$ECHO "$enable_fast_install" | $SED "$delay_single_quote_subst"`' -SHELL='`$ECHO "$SHELL" | $SED "$delay_single_quote_subst"`' -ECHO='`$ECHO "$ECHO" | $SED "$delay_single_quote_subst"`' -host_alias='`$ECHO "$host_alias" | $SED "$delay_single_quote_subst"`' -host='`$ECHO "$host" | $SED "$delay_single_quote_subst"`' -host_os='`$ECHO "$host_os" | $SED "$delay_single_quote_subst"`' -build_alias='`$ECHO "$build_alias" | $SED "$delay_single_quote_subst"`' -build='`$ECHO "$build" | $SED "$delay_single_quote_subst"`' -build_os='`$ECHO "$build_os" | $SED "$delay_single_quote_subst"`' -SED='`$ECHO "$SED" | $SED "$delay_single_quote_subst"`' -Xsed='`$ECHO "$Xsed" | $SED "$delay_single_quote_subst"`' -GREP='`$ECHO "$GREP" | $SED "$delay_single_quote_subst"`' -EGREP='`$ECHO "$EGREP" | $SED "$delay_single_quote_subst"`' -FGREP='`$ECHO "$FGREP" | $SED "$delay_single_quote_subst"`' -LD='`$ECHO "$LD" | $SED "$delay_single_quote_subst"`' -NM='`$ECHO "$NM" | $SED "$delay_single_quote_subst"`' -LN_S='`$ECHO "$LN_S" | $SED "$delay_single_quote_subst"`' -max_cmd_len='`$ECHO "$max_cmd_len" | $SED "$delay_single_quote_subst"`' -ac_objext='`$ECHO "$ac_objext" | $SED "$delay_single_quote_subst"`' -exeext='`$ECHO "$exeext" | $SED "$delay_single_quote_subst"`' -lt_unset='`$ECHO "$lt_unset" | $SED "$delay_single_quote_subst"`' -lt_SP2NL='`$ECHO "$lt_SP2NL" | $SED "$delay_single_quote_subst"`' -lt_NL2SP='`$ECHO "$lt_NL2SP" | $SED "$delay_single_quote_subst"`' -lt_cv_to_host_file_cmd='`$ECHO "$lt_cv_to_host_file_cmd" | $SED "$delay_single_quote_subst"`' -lt_cv_to_tool_file_cmd='`$ECHO "$lt_cv_to_tool_file_cmd" | $SED "$delay_single_quote_subst"`' -reload_flag='`$ECHO "$reload_flag" | $SED "$delay_single_quote_subst"`' -reload_cmds='`$ECHO "$reload_cmds" | $SED "$delay_single_quote_subst"`' -OBJDUMP='`$ECHO "$OBJDUMP" | $SED "$delay_single_quote_subst"`' -deplibs_check_method='`$ECHO "$deplibs_check_method" | $SED "$delay_single_quote_subst"`' -file_magic_cmd='`$ECHO "$file_magic_cmd" | $SED "$delay_single_quote_subst"`' -file_magic_glob='`$ECHO "$file_magic_glob" | $SED "$delay_single_quote_subst"`' -want_nocaseglob='`$ECHO "$want_nocaseglob" | $SED "$delay_single_quote_subst"`' -DLLTOOL='`$ECHO "$DLLTOOL" | $SED "$delay_single_quote_subst"`' -sharedlib_from_linklib_cmd='`$ECHO "$sharedlib_from_linklib_cmd" | $SED "$delay_single_quote_subst"`' -AR='`$ECHO "$AR" | $SED "$delay_single_quote_subst"`' -AR_FLAGS='`$ECHO "$AR_FLAGS" | $SED "$delay_single_quote_subst"`' -archiver_list_spec='`$ECHO "$archiver_list_spec" | $SED "$delay_single_quote_subst"`' -STRIP='`$ECHO "$STRIP" | $SED "$delay_single_quote_subst"`' -RANLIB='`$ECHO "$RANLIB" | $SED "$delay_single_quote_subst"`' -old_postinstall_cmds='`$ECHO "$old_postinstall_cmds" | $SED "$delay_single_quote_subst"`' -old_postuninstall_cmds='`$ECHO "$old_postuninstall_cmds" | $SED "$delay_single_quote_subst"`' -old_archive_cmds='`$ECHO "$old_archive_cmds" | $SED "$delay_single_quote_subst"`' -lock_old_archive_extraction='`$ECHO "$lock_old_archive_extraction" | $SED "$delay_single_quote_subst"`' -CC='`$ECHO "$CC" | $SED "$delay_single_quote_subst"`' -CFLAGS='`$ECHO "$CFLAGS" | $SED "$delay_single_quote_subst"`' -compiler='`$ECHO "$compiler" | $SED "$delay_single_quote_subst"`' -GCC='`$ECHO "$GCC" | $SED "$delay_single_quote_subst"`' -lt_cv_sys_global_symbol_pipe='`$ECHO "$lt_cv_sys_global_symbol_pipe" | $SED "$delay_single_quote_subst"`' -lt_cv_sys_global_symbol_to_cdecl='`$ECHO "$lt_cv_sys_global_symbol_to_cdecl" | $SED "$delay_single_quote_subst"`' -lt_cv_sys_global_symbol_to_c_name_address='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address" | $SED "$delay_single_quote_subst"`' -lt_cv_sys_global_symbol_to_c_name_address_lib_prefix='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address_lib_prefix" | $SED "$delay_single_quote_subst"`' -nm_file_list_spec='`$ECHO "$nm_file_list_spec" | $SED "$delay_single_quote_subst"`' -lt_sysroot='`$ECHO "$lt_sysroot" | $SED "$delay_single_quote_subst"`' -objdir='`$ECHO "$objdir" | $SED "$delay_single_quote_subst"`' -MAGIC_CMD='`$ECHO "$MAGIC_CMD" | $SED "$delay_single_quote_subst"`' -lt_prog_compiler_no_builtin_flag='`$ECHO "$lt_prog_compiler_no_builtin_flag" | $SED "$delay_single_quote_subst"`' -lt_prog_compiler_pic='`$ECHO "$lt_prog_compiler_pic" | $SED "$delay_single_quote_subst"`' -lt_prog_compiler_wl='`$ECHO "$lt_prog_compiler_wl" | $SED "$delay_single_quote_subst"`' -lt_prog_compiler_static='`$ECHO "$lt_prog_compiler_static" | $SED "$delay_single_quote_subst"`' -lt_cv_prog_compiler_c_o='`$ECHO "$lt_cv_prog_compiler_c_o" | $SED "$delay_single_quote_subst"`' -need_locks='`$ECHO "$need_locks" | $SED "$delay_single_quote_subst"`' -MANIFEST_TOOL='`$ECHO "$MANIFEST_TOOL" | $SED "$delay_single_quote_subst"`' -DSYMUTIL='`$ECHO "$DSYMUTIL" | $SED "$delay_single_quote_subst"`' -NMEDIT='`$ECHO "$NMEDIT" | $SED "$delay_single_quote_subst"`' -LIPO='`$ECHO "$LIPO" | $SED "$delay_single_quote_subst"`' -OTOOL='`$ECHO "$OTOOL" | $SED "$delay_single_quote_subst"`' -OTOOL64='`$ECHO "$OTOOL64" | $SED "$delay_single_quote_subst"`' -libext='`$ECHO "$libext" | $SED "$delay_single_quote_subst"`' -shrext_cmds='`$ECHO "$shrext_cmds" | $SED "$delay_single_quote_subst"`' -extract_expsyms_cmds='`$ECHO "$extract_expsyms_cmds" | $SED "$delay_single_quote_subst"`' -archive_cmds_need_lc='`$ECHO "$archive_cmds_need_lc" | $SED "$delay_single_quote_subst"`' -enable_shared_with_static_runtimes='`$ECHO "$enable_shared_with_static_runtimes" | $SED "$delay_single_quote_subst"`' -export_dynamic_flag_spec='`$ECHO "$export_dynamic_flag_spec" | $SED "$delay_single_quote_subst"`' -whole_archive_flag_spec='`$ECHO "$whole_archive_flag_spec" | $SED "$delay_single_quote_subst"`' -compiler_needs_object='`$ECHO "$compiler_needs_object" | $SED "$delay_single_quote_subst"`' -old_archive_from_new_cmds='`$ECHO "$old_archive_from_new_cmds" | $SED "$delay_single_quote_subst"`' -old_archive_from_expsyms_cmds='`$ECHO "$old_archive_from_expsyms_cmds" | $SED "$delay_single_quote_subst"`' -archive_cmds='`$ECHO "$archive_cmds" | $SED "$delay_single_quote_subst"`' -archive_expsym_cmds='`$ECHO "$archive_expsym_cmds" | $SED "$delay_single_quote_subst"`' -module_cmds='`$ECHO "$module_cmds" | $SED "$delay_single_quote_subst"`' -module_expsym_cmds='`$ECHO "$module_expsym_cmds" | $SED "$delay_single_quote_subst"`' -with_gnu_ld='`$ECHO "$with_gnu_ld" | $SED "$delay_single_quote_subst"`' -allow_undefined_flag='`$ECHO "$allow_undefined_flag" | $SED "$delay_single_quote_subst"`' -no_undefined_flag='`$ECHO "$no_undefined_flag" | $SED "$delay_single_quote_subst"`' -hardcode_libdir_flag_spec='`$ECHO "$hardcode_libdir_flag_spec" | $SED "$delay_single_quote_subst"`' -hardcode_libdir_flag_spec_ld='`$ECHO "$hardcode_libdir_flag_spec_ld" | $SED "$delay_single_quote_subst"`' -hardcode_libdir_separator='`$ECHO "$hardcode_libdir_separator" | $SED "$delay_single_quote_subst"`' -hardcode_direct='`$ECHO "$hardcode_direct" | $SED "$delay_single_quote_subst"`' -hardcode_direct_absolute='`$ECHO "$hardcode_direct_absolute" | $SED "$delay_single_quote_subst"`' -hardcode_minus_L='`$ECHO "$hardcode_minus_L" | $SED "$delay_single_quote_subst"`' -hardcode_shlibpath_var='`$ECHO "$hardcode_shlibpath_var" | $SED "$delay_single_quote_subst"`' -hardcode_automatic='`$ECHO "$hardcode_automatic" | $SED "$delay_single_quote_subst"`' -inherit_rpath='`$ECHO "$inherit_rpath" | $SED "$delay_single_quote_subst"`' -link_all_deplibs='`$ECHO "$link_all_deplibs" | $SED "$delay_single_quote_subst"`' -always_export_symbols='`$ECHO "$always_export_symbols" | $SED "$delay_single_quote_subst"`' -export_symbols_cmds='`$ECHO "$export_symbols_cmds" | $SED "$delay_single_quote_subst"`' -exclude_expsyms='`$ECHO "$exclude_expsyms" | $SED "$delay_single_quote_subst"`' -include_expsyms='`$ECHO "$include_expsyms" | $SED "$delay_single_quote_subst"`' -prelink_cmds='`$ECHO "$prelink_cmds" | $SED "$delay_single_quote_subst"`' -postlink_cmds='`$ECHO "$postlink_cmds" | $SED "$delay_single_quote_subst"`' -file_list_spec='`$ECHO "$file_list_spec" | $SED "$delay_single_quote_subst"`' -variables_saved_for_relink='`$ECHO "$variables_saved_for_relink" | $SED "$delay_single_quote_subst"`' -need_lib_prefix='`$ECHO "$need_lib_prefix" | $SED "$delay_single_quote_subst"`' -need_version='`$ECHO "$need_version" | $SED "$delay_single_quote_subst"`' -version_type='`$ECHO "$version_type" | $SED "$delay_single_quote_subst"`' -runpath_var='`$ECHO "$runpath_var" | $SED "$delay_single_quote_subst"`' -shlibpath_var='`$ECHO "$shlibpath_var" | $SED "$delay_single_quote_subst"`' -shlibpath_overrides_runpath='`$ECHO "$shlibpath_overrides_runpath" | $SED "$delay_single_quote_subst"`' -libname_spec='`$ECHO "$libname_spec" | $SED "$delay_single_quote_subst"`' -library_names_spec='`$ECHO "$library_names_spec" | $SED "$delay_single_quote_subst"`' -soname_spec='`$ECHO "$soname_spec" | $SED "$delay_single_quote_subst"`' -install_override_mode='`$ECHO "$install_override_mode" | $SED "$delay_single_quote_subst"`' -postinstall_cmds='`$ECHO "$postinstall_cmds" | $SED "$delay_single_quote_subst"`' -postuninstall_cmds='`$ECHO "$postuninstall_cmds" | $SED "$delay_single_quote_subst"`' -finish_cmds='`$ECHO "$finish_cmds" | $SED "$delay_single_quote_subst"`' -finish_eval='`$ECHO "$finish_eval" | $SED "$delay_single_quote_subst"`' -hardcode_into_libs='`$ECHO "$hardcode_into_libs" | $SED "$delay_single_quote_subst"`' -sys_lib_search_path_spec='`$ECHO "$sys_lib_search_path_spec" | $SED "$delay_single_quote_subst"`' -sys_lib_dlsearch_path_spec='`$ECHO "$sys_lib_dlsearch_path_spec" | $SED "$delay_single_quote_subst"`' -hardcode_action='`$ECHO "$hardcode_action" | $SED "$delay_single_quote_subst"`' -enable_dlopen='`$ECHO "$enable_dlopen" | $SED "$delay_single_quote_subst"`' -enable_dlopen_self='`$ECHO "$enable_dlopen_self" | $SED "$delay_single_quote_subst"`' -enable_dlopen_self_static='`$ECHO "$enable_dlopen_self_static" | $SED "$delay_single_quote_subst"`' -old_striplib='`$ECHO "$old_striplib" | $SED "$delay_single_quote_subst"`' -striplib='`$ECHO "$striplib" | $SED "$delay_single_quote_subst"`' - -LTCC='$LTCC' -LTCFLAGS='$LTCFLAGS' -compiler='$compiler_DEFAULT' - -# A function that is used when there is no print builtin or printf. -func_fallback_echo () -{ - eval 'cat <<_LTECHO_EOF -\$1 -_LTECHO_EOF' -} - -# Quote evaled strings. -for var in SHELL \ -ECHO \ -SED \ -GREP \ -EGREP \ -FGREP \ -LD \ -NM \ -LN_S \ -lt_SP2NL \ -lt_NL2SP \ -reload_flag \ -OBJDUMP \ -deplibs_check_method \ -file_magic_cmd \ -file_magic_glob \ -want_nocaseglob \ -DLLTOOL \ -sharedlib_from_linklib_cmd \ -AR \ -AR_FLAGS \ -archiver_list_spec \ -STRIP \ -RANLIB \ -CC \ -CFLAGS \ -compiler \ -lt_cv_sys_global_symbol_pipe \ -lt_cv_sys_global_symbol_to_cdecl \ -lt_cv_sys_global_symbol_to_c_name_address \ -lt_cv_sys_global_symbol_to_c_name_address_lib_prefix \ -nm_file_list_spec \ -lt_prog_compiler_no_builtin_flag \ -lt_prog_compiler_pic \ -lt_prog_compiler_wl \ -lt_prog_compiler_static \ -lt_cv_prog_compiler_c_o \ -need_locks \ -MANIFEST_TOOL \ -DSYMUTIL \ -NMEDIT \ -LIPO \ -OTOOL \ -OTOOL64 \ -shrext_cmds \ -export_dynamic_flag_spec \ -whole_archive_flag_spec \ -compiler_needs_object \ -with_gnu_ld \ -allow_undefined_flag \ -no_undefined_flag \ -hardcode_libdir_flag_spec \ -hardcode_libdir_flag_spec_ld \ -hardcode_libdir_separator \ -exclude_expsyms \ -include_expsyms \ -file_list_spec \ -variables_saved_for_relink \ -libname_spec \ -library_names_spec \ -soname_spec \ -install_override_mode \ -finish_eval \ -old_striplib \ -striplib; do - case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in - *[\\\\\\\`\\"\\\$]*) - eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED \\"\\\$sed_quote_subst\\"\\\`\\\\\\"" - ;; - *) - eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\"" - ;; - esac -done - -# Double-quote double-evaled strings. -for var in reload_cmds \ -old_postinstall_cmds \ -old_postuninstall_cmds \ -old_archive_cmds \ -extract_expsyms_cmds \ -old_archive_from_new_cmds \ -old_archive_from_expsyms_cmds \ -archive_cmds \ -archive_expsym_cmds \ -module_cmds \ -module_expsym_cmds \ -export_symbols_cmds \ -prelink_cmds \ -postlink_cmds \ -postinstall_cmds \ -postuninstall_cmds \ -finish_cmds \ -sys_lib_search_path_spec \ -sys_lib_dlsearch_path_spec; do - case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in - *[\\\\\\\`\\"\\\$]*) - eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\"" - ;; - *) - eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\"" - ;; - esac -done - -ac_aux_dir='$ac_aux_dir' -xsi_shell='$xsi_shell' -lt_shell_append='$lt_shell_append' - -# See if we are running on zsh, and set the options which allow our -# commands through without removal of \ escapes INIT. -if test -n "\${ZSH_VERSION+set}" ; then - setopt NO_GLOB_SUBST -fi - - - PACKAGE='$PACKAGE' - VERSION='$VERSION' - TIMESTAMP='$TIMESTAMP' - RM='$RM' - ofile='$ofile' - -ac_aux_dir='$ac_aux_dir' - - - -_ACEOF - -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 - -# Handling of arguments. -for ac_config_target in $ac_config_targets -do - case $ac_config_target in - "config.h") CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;; - "depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;; - "libtool") CONFIG_COMMANDS="$CONFIG_COMMANDS libtool" ;; - "${OUTPUT_FILES}") CONFIG_FILES="$CONFIG_FILES ${OUTPUT_FILES}" ;; - "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;; - "src/Makefile") CONFIG_FILES="$CONFIG_FILES src/Makefile" ;; - - *) as_fn_error $? "invalid argument: \`$ac_config_target'" "$LINENO" 5;; - esac -done - - -# If the user did not use the arguments to specify the items to instantiate, -# then the envvar interface is used. Set only those that are not. -# We use the long form for the default assignment because of an extremely -# bizarre bug on SunOS 4.1.3. -if $ac_need_defaults; then - test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files - test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers - test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands -fi - -# Have a temporary directory for convenience. Make it in the build tree -# simply because there is no reason against having it here, and in addition, -# creating and moving files from /tmp can sometimes cause problems. -# Hook for its removal unless debugging. -# Note that there is a small window in which the directory will not be cleaned: -# after its creation but before its name has been assigned to `$tmp'. -$debug || -{ - tmp= ac_tmp= - trap 'exit_status=$? - : "${ac_tmp:=$tmp}" - { test ! -d "$ac_tmp" || rm -fr "$ac_tmp"; } && exit $exit_status -' 0 - trap 'as_fn_exit 1' 1 2 13 15 -} -# Create a (secure) tmp directory for tmp files. - -{ - tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` && - test -d "$tmp" -} || -{ - tmp=./conf$$-$RANDOM - (umask 077 && mkdir "$tmp") -} || as_fn_error $? "cannot create a temporary directory in ." "$LINENO" 5 -ac_tmp=$tmp - -# Set up the scripts for CONFIG_FILES section. -# No need to generate them if there are no CONFIG_FILES. -# This happens for instance with `./config.status config.h'. -if test -n "$CONFIG_FILES"; then - - -ac_cr=`echo X | tr X '\015'` -# On cygwin, bash can eat \r inside `` if the user requested igncr. -# But we know of no other shell where ac_cr would be empty at this -# point, so we can use a bashism as a fallback. -if test "x$ac_cr" = x; then - eval ac_cr=\$\'\\r\' -fi -ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' /dev/null` -if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then - ac_cs_awk_cr='\\r' -else - ac_cs_awk_cr=$ac_cr -fi - -echo 'BEGIN {' >"$ac_tmp/subs1.awk" && -_ACEOF - - -{ - echo "cat >conf$$subs.awk <<_ACEOF" && - echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' && - echo "_ACEOF" -} >conf$$subs.sh || - as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 -ac_delim_num=`echo "$ac_subst_vars" | grep -c '^'` -ac_delim='%!_!# ' -for ac_last_try in false false false false false :; do - . ./conf$$subs.sh || - as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 - - ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X` - if test $ac_delim_n = $ac_delim_num; then - break - elif $ac_last_try; then - as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 - else - ac_delim="$ac_delim!$ac_delim _$ac_delim!! " - fi -done -rm -f conf$$subs.sh - -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -cat >>"\$ac_tmp/subs1.awk" <<\\_ACAWK && -_ACEOF -sed -n ' -h -s/^/S["/; s/!.*/"]=/ -p -g -s/^[^!]*!// -:repl -t repl -s/'"$ac_delim"'$// -t delim -:nl -h -s/\(.\{148\}\)..*/\1/ -t more1 -s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/ -p -n -b repl -:more1 -s/["\\]/\\&/g; s/^/"/; s/$/"\\/ -p -g -s/.\{148\}// -t nl -:delim -h -s/\(.\{148\}\)..*/\1/ -t more2 -s/["\\]/\\&/g; s/^/"/; s/$/"/ -p -b -:more2 -s/["\\]/\\&/g; s/^/"/; s/$/"\\/ -p -g -s/.\{148\}// -t delim -' >$CONFIG_STATUS || ac_write_fail=1 -rm -f conf$$subs.awk -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -_ACAWK -cat >>"\$ac_tmp/subs1.awk" <<_ACAWK && - for (key in S) S_is_set[key] = 1 - FS = "" - -} -{ - line = $ 0 - nfields = split(line, field, "@") - substed = 0 - len = length(field[1]) - for (i = 2; i < nfields; i++) { - key = field[i] - keylen = length(key) - if (S_is_set[key]) { - value = S[key] - line = substr(line, 1, len) "" value "" substr(line, len + keylen + 3) - len += length(value) + length(field[++i]) - substed = 1 - } else - len += 1 + keylen - } - - print line -} - -_ACAWK -_ACEOF -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then - sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g" -else - cat -fi < "$ac_tmp/subs1.awk" > "$ac_tmp/subs.awk" \ - || as_fn_error $? "could not setup config files machinery" "$LINENO" 5 -_ACEOF - -# VPATH may cause trouble with some makes, so we remove sole $(srcdir), -# ${srcdir} and @srcdir@ entries from VPATH if srcdir is ".", strip leading and -# trailing colons and then remove the whole line if VPATH becomes empty -# (actually we leave an empty line to preserve line numbers). -if test "x$srcdir" = x.; then - ac_vpsub='/^[ ]*VPATH[ ]*=[ ]*/{ -h -s/// -s/^/:/ -s/[ ]*$/:/ -s/:\$(srcdir):/:/g -s/:\${srcdir}:/:/g -s/:@srcdir@:/:/g -s/^:*// -s/:*$// -x -s/\(=[ ]*\).*/\1/ -G -s/\n// -s/^[^=]*=[ ]*$// -}' -fi - -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -fi # test -n "$CONFIG_FILES" - -# Set up the scripts for CONFIG_HEADERS section. -# No need to generate them if there are no CONFIG_HEADERS. -# This happens for instance with `./config.status Makefile'. -if test -n "$CONFIG_HEADERS"; then -cat >"$ac_tmp/defines.awk" <<\_ACAWK || -BEGIN { -_ACEOF - -# Transform confdefs.h into an awk script `defines.awk', embedded as -# here-document in config.status, that substitutes the proper values into -# config.h.in to produce config.h. - -# Create a delimiter string that does not exist in confdefs.h, to ease -# handling of long lines. -ac_delim='%!_!# ' -for ac_last_try in false false :; do - ac_tt=`sed -n "/$ac_delim/p" confdefs.h` - if test -z "$ac_tt"; then - break - elif $ac_last_try; then - as_fn_error $? "could not make $CONFIG_HEADERS" "$LINENO" 5 - else - ac_delim="$ac_delim!$ac_delim _$ac_delim!! " - fi -done - -# For the awk script, D is an array of macro values keyed by name, -# likewise P contains macro parameters if any. Preserve backslash -# newline sequences. - -ac_word_re=[_$as_cr_Letters][_$as_cr_alnum]* -sed -n ' -s/.\{148\}/&'"$ac_delim"'/g -t rset -:rset -s/^[ ]*#[ ]*define[ ][ ]*/ / -t def -d -:def -s/\\$// -t bsnl -s/["\\]/\\&/g -s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\ -D["\1"]=" \3"/p -s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2"/p -d -:bsnl -s/["\\]/\\&/g -s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\ -D["\1"]=" \3\\\\\\n"\\/p -t cont -s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2\\\\\\n"\\/p -t cont -d -:cont -n -s/.\{148\}/&'"$ac_delim"'/g -t clear -:clear -s/\\$// -t bsnlc -s/["\\]/\\&/g; s/^/"/; s/$/"/p -d -:bsnlc -s/["\\]/\\&/g; s/^/"/; s/$/\\\\\\n"\\/p -b cont -' >$CONFIG_STATUS || ac_write_fail=1 - -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 - for (key in D) D_is_set[key] = 1 - FS = "" -} -/^[\t ]*#[\t ]*(define|undef)[\t ]+$ac_word_re([\t (]|\$)/ { - line = \$ 0 - split(line, arg, " ") - if (arg[1] == "#") { - defundef = arg[2] - mac1 = arg[3] - } else { - defundef = substr(arg[1], 2) - mac1 = arg[2] - } - split(mac1, mac2, "(") #) - macro = mac2[1] - prefix = substr(line, 1, index(line, defundef) - 1) - if (D_is_set[macro]) { - # Preserve the white space surrounding the "#". - print prefix "define", macro P[macro] D[macro] - next - } else { - # Replace #undef with comments. This is necessary, for example, - # in the case of _POSIX_SOURCE, which is predefined and required - # on some systems where configure will not decide to define it. - if (defundef == "undef") { - print "/*", prefix defundef, macro, "*/" - next - } - } -} -{ print } -_ACAWK -_ACEOF -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 - as_fn_error $? "could not setup config headers machinery" "$LINENO" 5 -fi # test -n "$CONFIG_HEADERS" - - -eval set X " :F $CONFIG_FILES :H $CONFIG_HEADERS :C $CONFIG_COMMANDS" -shift -for ac_tag -do - case $ac_tag in - :[FHLC]) ac_mode=$ac_tag; continue;; - esac - case $ac_mode$ac_tag in - :[FHL]*:*);; - :L* | :C*:*) as_fn_error $? "invalid tag \`$ac_tag'" "$LINENO" 5;; - :[FH]-) ac_tag=-:-;; - :[FH]*) ac_tag=$ac_tag:$ac_tag.in;; - esac - ac_save_IFS=$IFS - IFS=: - set x $ac_tag - IFS=$ac_save_IFS - shift - ac_file=$1 - shift - - case $ac_mode in - :L) ac_source=$1;; - :[FH]) - ac_file_inputs= - for ac_f - do - case $ac_f in - -) ac_f="$ac_tmp/stdin";; - *) # Look for the file first in the build tree, then in the source tree - # (if the path is not absolute). The absolute path cannot be DOS-style, - # because $ac_f cannot contain `:'. - test -f "$ac_f" || - case $ac_f in - [\\/$]*) false;; - *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";; - esac || - as_fn_error 1 "cannot find input file: \`$ac_f'" "$LINENO" 5;; - esac - case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac - as_fn_append ac_file_inputs " '$ac_f'" - done - - # Let's still pretend it is `configure' which instantiates (i.e., don't - # use $as_me), people would be surprised to read: - # /* config.h. Generated by config.status. */ - configure_input='Generated from '` - $as_echo "$*" | sed 's|^[^:]*/||;s|:[^:]*/|, |g' - `' by configure.' - if test x"$ac_file" != x-; then - configure_input="$ac_file. $configure_input" - { $as_echo "$as_me:${as_lineno-$LINENO}: creating $ac_file" >&5 -$as_echo "$as_me: creating $ac_file" >&6;} - fi - # Neutralize special characters interpreted by sed in replacement strings. - case $configure_input in #( - *\&* | *\|* | *\\* ) - ac_sed_conf_input=`$as_echo "$configure_input" | - sed 's/[\\\\&|]/\\\\&/g'`;; #( - *) ac_sed_conf_input=$configure_input;; - esac - - case $ac_tag in - *:-:* | *:-) cat >"$ac_tmp/stdin" \ - || as_fn_error $? "could not create $ac_file" "$LINENO" 5 ;; - esac - ;; - esac - - ac_dir=`$as_dirname -- "$ac_file" || -$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$ac_file" : 'X\(//\)[^/]' \| \ - X"$ac_file" : 'X\(//\)$' \| \ - X"$ac_file" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X"$ac_file" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - as_dir="$ac_dir"; as_fn_mkdir_p - ac_builddir=. - -case "$ac_dir" in -.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; -*) - ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'` - # A ".." for each directory in $ac_dir_suffix. - ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` - case $ac_top_builddir_sub in - "") ac_top_builddir_sub=. ac_top_build_prefix= ;; - *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; - esac ;; -esac -ac_abs_top_builddir=$ac_pwd -ac_abs_builddir=$ac_pwd$ac_dir_suffix -# for backward compatibility: -ac_top_builddir=$ac_top_build_prefix - -case $srcdir in - .) # We are building in place. - ac_srcdir=. - ac_top_srcdir=$ac_top_builddir_sub - ac_abs_top_srcdir=$ac_pwd ;; - [\\/]* | ?:[\\/]* ) # Absolute name. - ac_srcdir=$srcdir$ac_dir_suffix; - ac_top_srcdir=$srcdir - ac_abs_top_srcdir=$srcdir ;; - *) # Relative name. - ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix - ac_top_srcdir=$ac_top_build_prefix$srcdir - ac_abs_top_srcdir=$ac_pwd/$srcdir ;; -esac -ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix - - - case $ac_mode in - :F) - # - # CONFIG_FILE - # - - case $INSTALL in - [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;; - *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;; - esac - ac_MKDIR_P=$MKDIR_P - case $MKDIR_P in - [\\/$]* | ?:[\\/]* ) ;; - */*) ac_MKDIR_P=$ac_top_build_prefix$MKDIR_P ;; - esac -_ACEOF - -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -# If the template does not know about datarootdir, expand it. -# FIXME: This hack should be removed a few years after 2.60. -ac_datarootdir_hack=; ac_datarootdir_seen= -ac_sed_dataroot=' -/datarootdir/ { - p - q -} -/@datadir@/p -/@docdir@/p -/@infodir@/p -/@localedir@/p -/@mandir@/p' -case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in -*datarootdir*) ac_datarootdir_seen=yes;; -*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*) - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5 -$as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;} -_ACEOF -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 - ac_datarootdir_hack=' - s&@datadir@&$datadir&g - s&@docdir@&$docdir&g - s&@infodir@&$infodir&g - s&@localedir@&$localedir&g - s&@mandir@&$mandir&g - s&\\\${datarootdir}&$datarootdir&g' ;; -esac -_ACEOF - -# Neutralize VPATH when `$srcdir' = `.'. -# Shell code in configure.ac might set extrasub. -# FIXME: do we really want to maintain this feature? -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -ac_sed_extra="$ac_vpsub -$extrasub -_ACEOF -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -:t -/@[a-zA-Z_][a-zA-Z_0-9]*@/!b -s|@configure_input@|$ac_sed_conf_input|;t t -s&@top_builddir@&$ac_top_builddir_sub&;t t -s&@top_build_prefix@&$ac_top_build_prefix&;t t -s&@srcdir@&$ac_srcdir&;t t -s&@abs_srcdir@&$ac_abs_srcdir&;t t -s&@top_srcdir@&$ac_top_srcdir&;t t -s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t -s&@builddir@&$ac_builddir&;t t -s&@abs_builddir@&$ac_abs_builddir&;t t -s&@abs_top_builddir@&$ac_abs_top_builddir&;t t -s&@INSTALL@&$ac_INSTALL&;t t -s&@MKDIR_P@&$ac_MKDIR_P&;t t -$ac_datarootdir_hack -" -eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$ac_tmp/subs.awk" \ - >$ac_tmp/out || as_fn_error $? "could not create $ac_file" "$LINENO" 5 - -test -z "$ac_datarootdir_hack$ac_datarootdir_seen" && - { ac_out=`sed -n '/\${datarootdir}/p' "$ac_tmp/out"`; test -n "$ac_out"; } && - { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' \ - "$ac_tmp/out"`; test -z "$ac_out"; } && - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a reference to the variable \`datarootdir' -which seems to be undefined. Please make sure it is defined" >&5 -$as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir' -which seems to be undefined. Please make sure it is defined" >&2;} - - rm -f "$ac_tmp/stdin" - case $ac_file in - -) cat "$ac_tmp/out" && rm -f "$ac_tmp/out";; - *) rm -f "$ac_file" && mv "$ac_tmp/out" "$ac_file";; - esac \ - || as_fn_error $? "could not create $ac_file" "$LINENO" 5 - ;; - :H) - # - # CONFIG_HEADER - # - if test x"$ac_file" != x-; then - { - $as_echo "/* $configure_input */" \ - && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs" - } >"$ac_tmp/config.h" \ - || as_fn_error $? "could not create $ac_file" "$LINENO" 5 - if diff "$ac_file" "$ac_tmp/config.h" >/dev/null 2>&1; then - { $as_echo "$as_me:${as_lineno-$LINENO}: $ac_file is unchanged" >&5 -$as_echo "$as_me: $ac_file is unchanged" >&6;} - else - rm -f "$ac_file" - mv "$ac_tmp/config.h" "$ac_file" \ - || as_fn_error $? "could not create $ac_file" "$LINENO" 5 - fi - else - $as_echo "/* $configure_input */" \ - && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs" \ - || as_fn_error $? "could not create -" "$LINENO" 5 - fi -# Compute "$ac_file"'s index in $config_headers. -_am_arg="$ac_file" -_am_stamp_count=1 -for _am_header in $config_headers :; do - case $_am_header in - $_am_arg | $_am_arg:* ) - break ;; - * ) - _am_stamp_count=`expr $_am_stamp_count + 1` ;; - esac -done -echo "timestamp for $_am_arg" >`$as_dirname -- "$_am_arg" || -$as_expr X"$_am_arg" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$_am_arg" : 'X\(//\)[^/]' \| \ - X"$_am_arg" : 'X\(//\)$' \| \ - X"$_am_arg" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X"$_am_arg" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'`/stamp-h$_am_stamp_count - ;; - - :C) { $as_echo "$as_me:${as_lineno-$LINENO}: executing $ac_file commands" >&5 -$as_echo "$as_me: executing $ac_file commands" >&6;} - ;; - esac - - - case $ac_file$ac_mode in - "depfiles":C) test x"$AMDEP_TRUE" != x"" || { - # Autoconf 2.62 quotes --file arguments for eval, but not when files - # are listed without --file. Let's play safe and only enable the eval - # if we detect the quoting. - case $CONFIG_FILES in - *\'*) eval set x "$CONFIG_FILES" ;; - *) set x $CONFIG_FILES ;; - esac - shift - for mf - do - # Strip MF so we end up with the name of the file. - mf=`echo "$mf" | sed -e 's/:.*$//'` - # Check whether this is an Automake generated Makefile or not. - # We used to match only the files named `Makefile.in', but - # some people rename them; so instead we look at the file content. - # Grep'ing the first line is not enough: some people post-process - # each Makefile.in and add a new line on top of each file to say so. - # Grep'ing the whole file is not good either: AIX grep has a line - # limit of 2048, but all sed's we know have understand at least 4000. - if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then - dirpart=`$as_dirname -- "$mf" || -$as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$mf" : 'X\(//\)[^/]' \| \ - X"$mf" : 'X\(//\)$' \| \ - X"$mf" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X"$mf" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - else - continue - fi - # Extract the definition of DEPDIR, am__include, and am__quote - # from the Makefile without running `make'. - DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` - test -z "$DEPDIR" && continue - am__include=`sed -n 's/^am__include = //p' < "$mf"` - test -z "am__include" && continue - am__quote=`sed -n 's/^am__quote = //p' < "$mf"` - # When using ansi2knr, U may be empty or an underscore; expand it - U=`sed -n 's/^U = //p' < "$mf"` - # Find all dependency output files, they are included files with - # $(DEPDIR) in their names. We invoke sed twice because it is the - # simplest approach to changing $(DEPDIR) to its actual value in the - # expansion. - for file in `sed -n " - s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ - sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do - # Make sure the directory exists. - test -f "$dirpart/$file" && continue - fdir=`$as_dirname -- "$file" || -$as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$file" : 'X\(//\)[^/]' \| \ - X"$file" : 'X\(//\)$' \| \ - X"$file" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X"$file" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - as_dir=$dirpart/$fdir; as_fn_mkdir_p - # echo "creating $dirpart/$file" - echo '# dummy' > "$dirpart/$file" - done - done -} - ;; - "libtool":C) - - # See if we are running on zsh, and set the options which allow our - # commands through without removal of \ escapes. - if test -n "${ZSH_VERSION+set}" ; then - setopt NO_GLOB_SUBST - fi - - cfgfile="${ofile}T" - trap "$RM \"$cfgfile\"; exit 1" 1 2 15 - $RM "$cfgfile" - - cat <<_LT_EOF >> "$cfgfile" -#! $SHELL - -# `$ECHO "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services. -# Generated automatically by $as_me ($PACKAGE$TIMESTAMP) $VERSION -# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: -# NOTE: Changes made to this file will be lost: look at ltmain.sh. -# -# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, -# 2006, 2007, 2008, 2009, 2010 Free Software Foundation, -# Inc. -# Written by Gordon Matzigkeit, 1996 -# -# This file is part of GNU Libtool. -# -# GNU Libtool is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# As a special exception to the GNU General Public License, -# if you distribute this file as part of a program or library that -# is built using GNU Libtool, you may include this file under the -# same distribution terms that you use for the rest of that program. -# -# GNU Libtool is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with GNU Libtool; see the file COPYING. If not, a copy -# can be downloaded from http://www.gnu.org/licenses/gpl.html, or -# obtained by writing to the Free Software Foundation, Inc., -# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. - - -# The names of the tagged configurations supported by this script. -available_tags="" - -# ### BEGIN LIBTOOL CONFIG - -# Whether or not to build static libraries. -build_old_libs=$enable_static - -# Which release of libtool.m4 was used? -macro_version=$macro_version -macro_revision=$macro_revision - -# Whether or not to build shared libraries. -build_libtool_libs=$enable_shared - -# What type of objects to build. -pic_mode=$pic_mode - -# Whether or not to optimize for fast installation. -fast_install=$enable_fast_install - -# Shell to use when invoking shell scripts. -SHELL=$lt_SHELL - -# An echo program that protects backslashes. -ECHO=$lt_ECHO - -# The host system. -host_alias=$host_alias -host=$host -host_os=$host_os - -# The build system. -build_alias=$build_alias -build=$build -build_os=$build_os - -# A sed program that does not truncate output. -SED=$lt_SED - -# Sed that helps us avoid accidentally triggering echo(1) options like -n. -Xsed="\$SED -e 1s/^X//" - -# A grep program that handles long lines. -GREP=$lt_GREP - -# An ERE matcher. -EGREP=$lt_EGREP - -# A literal string matcher. -FGREP=$lt_FGREP - -# A BSD- or MS-compatible name lister. -NM=$lt_NM - -# Whether we need soft or hard links. -LN_S=$lt_LN_S - -# What is the maximum length of a command? -max_cmd_len=$max_cmd_len - -# Object file suffix (normally "o"). -objext=$ac_objext - -# Executable file suffix (normally ""). -exeext=$exeext - -# whether the shell understands "unset". -lt_unset=$lt_unset - -# turn spaces into newlines. -SP2NL=$lt_lt_SP2NL - -# turn newlines into spaces. -NL2SP=$lt_lt_NL2SP - -# convert \$build file names to \$host format. -to_host_file_cmd=$lt_cv_to_host_file_cmd - -# convert \$build files to toolchain format. -to_tool_file_cmd=$lt_cv_to_tool_file_cmd - -# An object symbol dumper. -OBJDUMP=$lt_OBJDUMP - -# Method to check whether dependent libraries are shared objects. -deplibs_check_method=$lt_deplibs_check_method - -# Command to use when deplibs_check_method = "file_magic". -file_magic_cmd=$lt_file_magic_cmd - -# How to find potential files when deplibs_check_method = "file_magic". -file_magic_glob=$lt_file_magic_glob - -# Find potential files using nocaseglob when deplibs_check_method = "file_magic". -want_nocaseglob=$lt_want_nocaseglob - -# DLL creation program. -DLLTOOL=$lt_DLLTOOL - -# Command to associate shared and link libraries. -sharedlib_from_linklib_cmd=$lt_sharedlib_from_linklib_cmd - -# The archiver. -AR=$lt_AR - -# Flags to create an archive. -AR_FLAGS=$lt_AR_FLAGS - -# How to feed a file listing to the archiver. -archiver_list_spec=$lt_archiver_list_spec - -# A symbol stripping program. -STRIP=$lt_STRIP - -# Commands used to install an old-style archive. -RANLIB=$lt_RANLIB -old_postinstall_cmds=$lt_old_postinstall_cmds -old_postuninstall_cmds=$lt_old_postuninstall_cmds - -# Whether to use a lock for old archive extraction. -lock_old_archive_extraction=$lock_old_archive_extraction - -# A C compiler. -LTCC=$lt_CC - -# LTCC compiler flags. -LTCFLAGS=$lt_CFLAGS - -# Take the output of nm and produce a listing of raw symbols and C names. -global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe - -# Transform the output of nm in a proper C declaration. -global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl - -# Transform the output of nm in a C name address pair. -global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address - -# Transform the output of nm in a C name address pair when lib prefix is needed. -global_symbol_to_c_name_address_lib_prefix=$lt_lt_cv_sys_global_symbol_to_c_name_address_lib_prefix - -# Specify filename containing input files for \$NM. -nm_file_list_spec=$lt_nm_file_list_spec - -# The root where to search for dependent libraries,and in which our libraries should be installed. -lt_sysroot=$lt_sysroot - -# The name of the directory that contains temporary libtool files. -objdir=$objdir - -# Used to examine libraries when file_magic_cmd begins with "file". -MAGIC_CMD=$MAGIC_CMD - -# Must we lock files when doing compilation? -need_locks=$lt_need_locks - -# Manifest tool. -MANIFEST_TOOL=$lt_MANIFEST_TOOL - -# Tool to manipulate archived DWARF debug symbol files on Mac OS X. -DSYMUTIL=$lt_DSYMUTIL - -# Tool to change global to local symbols on Mac OS X. -NMEDIT=$lt_NMEDIT - -# Tool to manipulate fat objects and archives on Mac OS X. -LIPO=$lt_LIPO - -# ldd/readelf like tool for Mach-O binaries on Mac OS X. -OTOOL=$lt_OTOOL - -# ldd/readelf like tool for 64 bit Mach-O binaries on Mac OS X 10.4. -OTOOL64=$lt_OTOOL64 - -# Old archive suffix (normally "a"). -libext=$libext - -# Shared library suffix (normally ".so"). -shrext_cmds=$lt_shrext_cmds - -# The commands to extract the exported symbol list from a shared archive. -extract_expsyms_cmds=$lt_extract_expsyms_cmds - -# Variables whose values should be saved in libtool wrapper scripts and -# restored at link time. -variables_saved_for_relink=$lt_variables_saved_for_relink - -# Do we need the "lib" prefix for modules? -need_lib_prefix=$need_lib_prefix - -# Do we need a version for libraries? -need_version=$need_version - -# Library versioning type. -version_type=$version_type - -# Shared library runtime path variable. -runpath_var=$runpath_var - -# Shared library path variable. -shlibpath_var=$shlibpath_var - -# Is shlibpath searched before the hard-coded library search path? -shlibpath_overrides_runpath=$shlibpath_overrides_runpath - -# Format of library name prefix. -libname_spec=$lt_libname_spec - -# List of archive names. First name is the real one, the rest are links. -# The last name is the one that the linker finds with -lNAME -library_names_spec=$lt_library_names_spec - -# The coded name of the library, if different from the real name. -soname_spec=$lt_soname_spec - -# Permission mode override for installation of shared libraries. -install_override_mode=$lt_install_override_mode - -# Command to use after installation of a shared archive. -postinstall_cmds=$lt_postinstall_cmds - -# Command to use after uninstallation of a shared archive. -postuninstall_cmds=$lt_postuninstall_cmds - -# Commands used to finish a libtool library installation in a directory. -finish_cmds=$lt_finish_cmds - -# As "finish_cmds", except a single script fragment to be evaled but -# not shown. -finish_eval=$lt_finish_eval - -# Whether we should hardcode library paths into libraries. -hardcode_into_libs=$hardcode_into_libs - -# Compile-time system search path for libraries. -sys_lib_search_path_spec=$lt_sys_lib_search_path_spec - -# Run-time system search path for libraries. -sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec - -# Whether dlopen is supported. -dlopen_support=$enable_dlopen - -# Whether dlopen of programs is supported. -dlopen_self=$enable_dlopen_self - -# Whether dlopen of statically linked programs is supported. -dlopen_self_static=$enable_dlopen_self_static - -# Commands to strip libraries. -old_striplib=$lt_old_striplib -striplib=$lt_striplib - - -# The linker used to build libraries. -LD=$lt_LD - -# How to create reloadable object files. -reload_flag=$lt_reload_flag -reload_cmds=$lt_reload_cmds - -# Commands used to build an old-style archive. -old_archive_cmds=$lt_old_archive_cmds - -# A language specific compiler. -CC=$lt_compiler - -# Is the compiler the GNU compiler? -with_gcc=$GCC - -# Compiler flag to turn off builtin functions. -no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag - -# Additional compiler flags for building library objects. -pic_flag=$lt_lt_prog_compiler_pic - -# How to pass a linker flag through the compiler. -wl=$lt_lt_prog_compiler_wl - -# Compiler flag to prevent dynamic linking. -link_static_flag=$lt_lt_prog_compiler_static - -# Does compiler simultaneously support -c and -o options? -compiler_c_o=$lt_lt_cv_prog_compiler_c_o - -# Whether or not to add -lc for building shared libraries. -build_libtool_need_lc=$archive_cmds_need_lc - -# Whether or not to disallow shared libs when runtime libs are static. -allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes - -# Compiler flag to allow reflexive dlopens. -export_dynamic_flag_spec=$lt_export_dynamic_flag_spec - -# Compiler flag to generate shared objects directly from archives. -whole_archive_flag_spec=$lt_whole_archive_flag_spec - -# Whether the compiler copes with passing no objects directly. -compiler_needs_object=$lt_compiler_needs_object - -# Create an old-style archive from a shared archive. -old_archive_from_new_cmds=$lt_old_archive_from_new_cmds - -# Create a temporary old-style archive to link instead of a shared archive. -old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds - -# Commands used to build a shared archive. -archive_cmds=$lt_archive_cmds -archive_expsym_cmds=$lt_archive_expsym_cmds - -# Commands used to build a loadable module if different from building -# a shared archive. -module_cmds=$lt_module_cmds -module_expsym_cmds=$lt_module_expsym_cmds - -# Whether we are building with GNU ld or not. -with_gnu_ld=$lt_with_gnu_ld - -# Flag that allows shared libraries with undefined symbols to be built. -allow_undefined_flag=$lt_allow_undefined_flag - -# Flag that enforces no undefined symbols. -no_undefined_flag=$lt_no_undefined_flag - -# Flag to hardcode \$libdir into a binary during linking. -# This must work even if \$libdir does not exist -hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec - -# If ld is used when linking, flag to hardcode \$libdir into a binary -# during linking. This must work even if \$libdir does not exist. -hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld - -# Whether we need a single "-rpath" flag with a separated argument. -hardcode_libdir_separator=$lt_hardcode_libdir_separator - -# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes -# DIR into the resulting binary. -hardcode_direct=$hardcode_direct - -# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes -# DIR into the resulting binary and the resulting library dependency is -# "absolute",i.e impossible to change by setting \${shlibpath_var} if the -# library is relocated. -hardcode_direct_absolute=$hardcode_direct_absolute - -# Set to "yes" if using the -LDIR flag during linking hardcodes DIR -# into the resulting binary. -hardcode_minus_L=$hardcode_minus_L - -# Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR -# into the resulting binary. -hardcode_shlibpath_var=$hardcode_shlibpath_var - -# Set to "yes" if building a shared library automatically hardcodes DIR -# into the library and all subsequent libraries and executables linked -# against it. -hardcode_automatic=$hardcode_automatic - -# Set to yes if linker adds runtime paths of dependent libraries -# to runtime path list. -inherit_rpath=$inherit_rpath - -# Whether libtool must link a program against all its dependency libraries. -link_all_deplibs=$link_all_deplibs - -# Set to "yes" if exported symbols are required. -always_export_symbols=$always_export_symbols - -# The commands to list exported symbols. -export_symbols_cmds=$lt_export_symbols_cmds - -# Symbols that should not be listed in the preloaded symbols. -exclude_expsyms=$lt_exclude_expsyms - -# Symbols that must always be exported. -include_expsyms=$lt_include_expsyms - -# Commands necessary for linking programs (against libraries) with templates. -prelink_cmds=$lt_prelink_cmds - -# Commands necessary for finishing linking programs. -postlink_cmds=$lt_postlink_cmds - -# Specify filename containing input files. -file_list_spec=$lt_file_list_spec - -# How to hardcode a shared library path into an executable. -hardcode_action=$hardcode_action - -# ### END LIBTOOL CONFIG - -_LT_EOF - - case $host_os in - aix3*) - cat <<\_LT_EOF >> "$cfgfile" -# AIX sometimes has problems with the GCC collect2 program. For some -# reason, if we set the COLLECT_NAMES environment variable, the problems -# vanish in a puff of smoke. -if test "X${COLLECT_NAMES+set}" != Xset; then - COLLECT_NAMES= - export COLLECT_NAMES -fi -_LT_EOF - ;; - esac - - -ltmain="$ac_aux_dir/ltmain.sh" - - - # We use sed instead of cat because bash on DJGPP gets confused if - # if finds mixed CR/LF and LF-only lines. Since sed operates in - # text mode, it properly converts lines to CR/LF. This bash problem - # is reportedly fixed, but why not run on old versions too? - sed '$q' "$ltmain" >> "$cfgfile" \ - || (rm -f "$cfgfile"; exit 1) - - if test x"$xsi_shell" = xyes; then - sed -e '/^func_dirname ()$/,/^} # func_dirname /c\ -func_dirname ()\ -{\ -\ case ${1} in\ -\ */*) func_dirname_result="${1%/*}${2}" ;;\ -\ * ) func_dirname_result="${3}" ;;\ -\ esac\ -} # Extended-shell func_dirname implementation' "$cfgfile" > $cfgfile.tmp \ - && mv -f "$cfgfile.tmp" "$cfgfile" \ - || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") -test 0 -eq $? || _lt_function_replace_fail=: - - - sed -e '/^func_basename ()$/,/^} # func_basename /c\ -func_basename ()\ -{\ -\ func_basename_result="${1##*/}"\ -} # Extended-shell func_basename implementation' "$cfgfile" > $cfgfile.tmp \ - && mv -f "$cfgfile.tmp" "$cfgfile" \ - || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") -test 0 -eq $? || _lt_function_replace_fail=: - - - sed -e '/^func_dirname_and_basename ()$/,/^} # func_dirname_and_basename /c\ -func_dirname_and_basename ()\ -{\ -\ case ${1} in\ -\ */*) func_dirname_result="${1%/*}${2}" ;;\ -\ * ) func_dirname_result="${3}" ;;\ -\ esac\ -\ func_basename_result="${1##*/}"\ -} # Extended-shell func_dirname_and_basename implementation' "$cfgfile" > $cfgfile.tmp \ - && mv -f "$cfgfile.tmp" "$cfgfile" \ - || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") -test 0 -eq $? || _lt_function_replace_fail=: - - - sed -e '/^func_stripname ()$/,/^} # func_stripname /c\ -func_stripname ()\ -{\ -\ # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are\ -\ # positional parameters, so assign one to ordinary parameter first.\ -\ func_stripname_result=${3}\ -\ func_stripname_result=${func_stripname_result#"${1}"}\ -\ func_stripname_result=${func_stripname_result%"${2}"}\ -} # Extended-shell func_stripname implementation' "$cfgfile" > $cfgfile.tmp \ - && mv -f "$cfgfile.tmp" "$cfgfile" \ - || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") -test 0 -eq $? || _lt_function_replace_fail=: - - - sed -e '/^func_split_long_opt ()$/,/^} # func_split_long_opt /c\ -func_split_long_opt ()\ -{\ -\ func_split_long_opt_name=${1%%=*}\ -\ func_split_long_opt_arg=${1#*=}\ -} # Extended-shell func_split_long_opt implementation' "$cfgfile" > $cfgfile.tmp \ - && mv -f "$cfgfile.tmp" "$cfgfile" \ - || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") -test 0 -eq $? || _lt_function_replace_fail=: - - - sed -e '/^func_split_short_opt ()$/,/^} # func_split_short_opt /c\ -func_split_short_opt ()\ -{\ -\ func_split_short_opt_arg=${1#??}\ -\ func_split_short_opt_name=${1%"$func_split_short_opt_arg"}\ -} # Extended-shell func_split_short_opt implementation' "$cfgfile" > $cfgfile.tmp \ - && mv -f "$cfgfile.tmp" "$cfgfile" \ - || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") -test 0 -eq $? || _lt_function_replace_fail=: - - - sed -e '/^func_lo2o ()$/,/^} # func_lo2o /c\ -func_lo2o ()\ -{\ -\ case ${1} in\ -\ *.lo) func_lo2o_result=${1%.lo}.${objext} ;;\ -\ *) func_lo2o_result=${1} ;;\ -\ esac\ -} # Extended-shell func_lo2o implementation' "$cfgfile" > $cfgfile.tmp \ - && mv -f "$cfgfile.tmp" "$cfgfile" \ - || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") -test 0 -eq $? || _lt_function_replace_fail=: - - - sed -e '/^func_xform ()$/,/^} # func_xform /c\ -func_xform ()\ -{\ - func_xform_result=${1%.*}.lo\ -} # Extended-shell func_xform implementation' "$cfgfile" > $cfgfile.tmp \ - && mv -f "$cfgfile.tmp" "$cfgfile" \ - || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") -test 0 -eq $? || _lt_function_replace_fail=: - - - sed -e '/^func_arith ()$/,/^} # func_arith /c\ -func_arith ()\ -{\ - func_arith_result=$(( $* ))\ -} # Extended-shell func_arith implementation' "$cfgfile" > $cfgfile.tmp \ - && mv -f "$cfgfile.tmp" "$cfgfile" \ - || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") -test 0 -eq $? || _lt_function_replace_fail=: - - - sed -e '/^func_len ()$/,/^} # func_len /c\ -func_len ()\ -{\ - func_len_result=${#1}\ -} # Extended-shell func_len implementation' "$cfgfile" > $cfgfile.tmp \ - && mv -f "$cfgfile.tmp" "$cfgfile" \ - || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") -test 0 -eq $? || _lt_function_replace_fail=: - -fi - -if test x"$lt_shell_append" = xyes; then - sed -e '/^func_append ()$/,/^} # func_append /c\ -func_append ()\ -{\ - eval "${1}+=\\${2}"\ -} # Extended-shell func_append implementation' "$cfgfile" > $cfgfile.tmp \ - && mv -f "$cfgfile.tmp" "$cfgfile" \ - || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") -test 0 -eq $? || _lt_function_replace_fail=: - - - sed -e '/^func_append_quoted ()$/,/^} # func_append_quoted /c\ -func_append_quoted ()\ -{\ -\ func_quote_for_eval "${2}"\ -\ eval "${1}+=\\\\ \\$func_quote_for_eval_result"\ -} # Extended-shell func_append_quoted implementation' "$cfgfile" > $cfgfile.tmp \ - && mv -f "$cfgfile.tmp" "$cfgfile" \ - || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") -test 0 -eq $? || _lt_function_replace_fail=: - - - # Save a `func_append' function call where possible by direct use of '+=' - sed -e 's%func_append \([a-zA-Z_]\{1,\}\) "%\1+="%g' $cfgfile > $cfgfile.tmp \ - && mv -f "$cfgfile.tmp" "$cfgfile" \ - || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") - test 0 -eq $? || _lt_function_replace_fail=: -else - # Save a `func_append' function call even when '+=' is not available - sed -e 's%func_append \([a-zA-Z_]\{1,\}\) "%\1="$\1%g' $cfgfile > $cfgfile.tmp \ - && mv -f "$cfgfile.tmp" "$cfgfile" \ - || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") - test 0 -eq $? || _lt_function_replace_fail=: -fi - -if test x"$_lt_function_replace_fail" = x":"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Unable to substitute extended shell functions in $ofile" >&5 -$as_echo "$as_me: WARNING: Unable to substitute extended shell functions in $ofile" >&2;} -fi - - - mv -f "$cfgfile" "$ofile" || - (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile") - chmod +x "$ofile" - - ;; - - esac -done # for ac_tag - - -as_fn_exit 0 -_ACEOF -ac_clean_files=$ac_clean_files_save - -test $ac_write_fail = 0 || - as_fn_error $? "write failure creating $CONFIG_STATUS" "$LINENO" 5 - - -# configure is writing to config.log, and then calls config.status. -# config.status does its own redirection, appending to config.log. -# Unfortunately, on DOS this fails, as config.log is still kept open -# by configure, so config.status won't be able to write to it; its -# output is simply discarded. So we exec the FD to /dev/null, -# effectively closing config.log, so it can be properly (re)opened and -# appended to by config.status. When coming back to configure, we -# need to make the FD available again. -if test "$no_create" != yes; then - ac_cs_success=: - ac_config_status_args= - test "$silent" = yes && - ac_config_status_args="$ac_config_status_args --quiet" - exec 5>/dev/null - $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false - exec 5>>config.log - # Use ||, not &&, to avoid exiting from the if with $? = 1, which - # would make configure fail if this is the last instruction. - $ac_cs_success || as_fn_exit 1 -fi -if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: unrecognized options: $ac_unrecognized_opts" >&5 -$as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2;} -fi diff -Nru libshairport-1.2.0.20310.1/autom4te.cache/output.1 libshairport-1.2.1~git20120110.aeb4987/autom4te.cache/output.1 --- libshairport-1.2.0.20310.1/autom4te.cache/output.1 2011-11-10 19:35:56.000000000 +0000 +++ libshairport-1.2.1~git20120110.aeb4987/autom4te.cache/output.1 1970-01-01 00:00:00.000000000 +0000 @@ -1,15956 +0,0 @@ -@%:@! /bin/sh -@%:@ Guess values for system-dependent variables and create Makefiles. -@%:@ Generated by GNU Autoconf 2.68 for shairport.c 1.2.0. -@%:@ -@%:@ Report bugs to . -@%:@ -@%:@ -@%:@ Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, -@%:@ 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010 Free Software -@%:@ Foundation, Inc. -@%:@ -@%:@ -@%:@ This configure script is free software; the Free Software Foundation -@%:@ gives unlimited permission to copy, distribute and modify it. -## -------------------- ## -## M4sh Initialization. ## -## -------------------- ## - -# Be more Bourne compatible -DUALCASE=1; export DUALCASE # for MKS sh -if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then : - emulate sh - NULLCMD=: - # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which - # is contrary to our usage. Disable this feature. - alias -g '${1+"$@"}'='"$@"' - setopt NO_GLOB_SUBST -else - case `(set -o) 2>/dev/null` in @%:@( - *posix*) : - set -o posix ;; @%:@( - *) : - ;; -esac -fi - - -as_nl=' -' -export as_nl -# Printing a long string crashes Solaris 7 /usr/bin/printf. -as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' -as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo -as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo -# Prefer a ksh shell builtin over an external printf program on Solaris, -# but without wasting forks for bash or zsh. -if test -z "$BASH_VERSION$ZSH_VERSION" \ - && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then - as_echo='print -r --' - as_echo_n='print -rn --' -elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then - as_echo='printf %s\n' - as_echo_n='printf %s' -else - if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then - as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"' - as_echo_n='/usr/ucb/echo -n' - else - as_echo_body='eval expr "X$1" : "X\\(.*\\)"' - as_echo_n_body='eval - arg=$1; - case $arg in @%:@( - *"$as_nl"*) - expr "X$arg" : "X\\(.*\\)$as_nl"; - arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;; - esac; - expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl" - ' - export as_echo_n_body - as_echo_n='sh -c $as_echo_n_body as_echo' - fi - export as_echo_body - as_echo='sh -c $as_echo_body as_echo' -fi - -# The user is always right. -if test "${PATH_SEPARATOR+set}" != set; then - PATH_SEPARATOR=: - (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { - (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || - PATH_SEPARATOR=';' - } -fi - - -# IFS -# We need space, tab and new line, in precisely that order. Quoting is -# there to prevent editors from complaining about space-tab. -# (If _AS_PATH_WALK were called with IFS unset, it would disable word -# splitting by setting IFS to empty value.) -IFS=" "" $as_nl" - -# Find who we are. Look in the path if we contain no directory separator. -as_myself= -case $0 in @%:@(( - *[\\/]* ) as_myself=$0 ;; - *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break - done -IFS=$as_save_IFS - - ;; -esac -# We did not find ourselves, most probably we were run as `sh COMMAND' -# in which case we are not to be found in the path. -if test "x$as_myself" = x; then - as_myself=$0 -fi -if test ! -f "$as_myself"; then - $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 - exit 1 -fi - -# Unset variables that we do not need and which cause bugs (e.g. in -# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1" -# suppresses any "Segmentation fault" message there. '((' could -# trigger a bug in pdksh 5.2.14. -for as_var in BASH_ENV ENV MAIL MAILPATH -do eval test x\${$as_var+set} = xset \ - && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || : -done -PS1='$ ' -PS2='> ' -PS4='+ ' - -# NLS nuisances. -LC_ALL=C -export LC_ALL -LANGUAGE=C -export LANGUAGE - -# CDPATH. -(unset CDPATH) >/dev/null 2>&1 && unset CDPATH - -if test "x$CONFIG_SHELL" = x; then - as_bourne_compatible="if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then : - emulate sh - NULLCMD=: - # Pre-4.2 versions of Zsh do word splitting on \${1+\"\$@\"}, which - # is contrary to our usage. Disable this feature. - alias -g '\${1+\"\$@\"}'='\"\$@\"' - setopt NO_GLOB_SUBST -else - case \`(set -o) 2>/dev/null\` in @%:@( - *posix*) : - set -o posix ;; @%:@( - *) : - ;; -esac -fi -" - as_required="as_fn_return () { (exit \$1); } -as_fn_success () { as_fn_return 0; } -as_fn_failure () { as_fn_return 1; } -as_fn_ret_success () { return 0; } -as_fn_ret_failure () { return 1; } - -exitcode=0 -as_fn_success || { exitcode=1; echo as_fn_success failed.; } -as_fn_failure && { exitcode=1; echo as_fn_failure succeeded.; } -as_fn_ret_success || { exitcode=1; echo as_fn_ret_success failed.; } -as_fn_ret_failure && { exitcode=1; echo as_fn_ret_failure succeeded.; } -if ( set x; as_fn_ret_success y && test x = \"\$1\" ); then : - -else - exitcode=1; echo positional parameters were not saved. -fi -test x\$exitcode = x0 || exit 1" - as_suggested=" as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_1a=\$LINENO - as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO - eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" && - test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1 - - test -n \"\${ZSH_VERSION+set}\${BASH_VERSION+set}\" || ( - ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' - ECHO=\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO - ECHO=\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO - PATH=/empty FPATH=/empty; export PATH FPATH - test \"X\`printf %s \$ECHO\`\" = \"X\$ECHO\" \\ - || test \"X\`print -r -- \$ECHO\`\" = \"X\$ECHO\" ) || exit 1 -test \$(( 1 + 1 )) = 2 || exit 1" - if (eval "$as_required") 2>/dev/null; then : - as_have_required=yes -else - as_have_required=no -fi - if test x$as_have_required = xyes && (eval "$as_suggested") 2>/dev/null; then : - -else - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -as_found=false -for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - as_found=: - case $as_dir in @%:@( - /*) - for as_base in sh bash ksh sh5; do - # Try only shells that exist, to save several forks. - as_shell=$as_dir/$as_base - if { test -f "$as_shell" || test -f "$as_shell.exe"; } && - { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$as_shell"; } 2>/dev/null; then : - CONFIG_SHELL=$as_shell as_have_required=yes - if { $as_echo "$as_bourne_compatible""$as_suggested" | as_run=a "$as_shell"; } 2>/dev/null; then : - break 2 -fi -fi - done;; - esac - as_found=false -done -$as_found || { if { test -f "$SHELL" || test -f "$SHELL.exe"; } && - { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$SHELL"; } 2>/dev/null; then : - CONFIG_SHELL=$SHELL as_have_required=yes -fi; } -IFS=$as_save_IFS - - - if test "x$CONFIG_SHELL" != x; then : - # We cannot yet assume a decent shell, so we have to provide a - # neutralization value for shells without unset; and this also - # works around shells that cannot unset nonexistent variables. - # Preserve -v and -x to the replacement shell. - BASH_ENV=/dev/null - ENV=/dev/null - (unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV - export CONFIG_SHELL - case $- in @%:@ (((( - *v*x* | *x*v* ) as_opts=-vx ;; - *v* ) as_opts=-v ;; - *x* ) as_opts=-x ;; - * ) as_opts= ;; - esac - exec "$CONFIG_SHELL" $as_opts "$as_myself" ${1+"$@"} -fi - - if test x$as_have_required = xno; then : - $as_echo "$0: This script requires a shell more modern than all" - $as_echo "$0: the shells that I found on your system." - if test x${ZSH_VERSION+set} = xset ; then - $as_echo "$0: In particular, zsh $ZSH_VERSION has bugs and should" - $as_echo "$0: be upgraded to zsh 4.3.4 or later." - else - $as_echo "$0: Please tell bug-autoconf@gnu.org and -$0: http://trac.xbmc.org about your system, including any -$0: error possibly output before this message. Then install -$0: a modern shell, or manually run the script under such a -$0: shell if you do have one." - fi - exit 1 -fi -fi -fi -SHELL=${CONFIG_SHELL-/bin/sh} -export SHELL -# Unset more variables known to interfere with behavior of common tools. -CLICOLOR_FORCE= GREP_OPTIONS= -unset CLICOLOR_FORCE GREP_OPTIONS - -## --------------------- ## -## M4sh Shell Functions. ## -## --------------------- ## -@%:@ as_fn_unset VAR -@%:@ --------------- -@%:@ Portably unset VAR. -as_fn_unset () -{ - { eval $1=; unset $1;} -} -as_unset=as_fn_unset - -@%:@ as_fn_set_status STATUS -@%:@ ----------------------- -@%:@ Set @S|@? to STATUS, without forking. -as_fn_set_status () -{ - return $1 -} @%:@ as_fn_set_status - -@%:@ as_fn_exit STATUS -@%:@ ----------------- -@%:@ Exit the shell with STATUS, even in a "trap 0" or "set -e" context. -as_fn_exit () -{ - set +e - as_fn_set_status $1 - exit $1 -} @%:@ as_fn_exit - -@%:@ as_fn_mkdir_p -@%:@ ------------- -@%:@ Create "@S|@as_dir" as a directory, including parents if necessary. -as_fn_mkdir_p () -{ - - case $as_dir in #( - -*) as_dir=./$as_dir;; - esac - test -d "$as_dir" || eval $as_mkdir_p || { - as_dirs= - while :; do - case $as_dir in #( - *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( - *) as_qdir=$as_dir;; - esac - as_dirs="'$as_qdir' $as_dirs" - as_dir=`$as_dirname -- "$as_dir" || -$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$as_dir" : 'X\(//\)[^/]' \| \ - X"$as_dir" : 'X\(//\)$' \| \ - X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X"$as_dir" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - test -d "$as_dir" && break - done - test -z "$as_dirs" || eval "mkdir $as_dirs" - } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir" - - -} @%:@ as_fn_mkdir_p -@%:@ as_fn_append VAR VALUE -@%:@ ---------------------- -@%:@ Append the text in VALUE to the end of the definition contained in VAR. Take -@%:@ advantage of any shell optimizations that allow amortized linear growth over -@%:@ repeated appends, instead of the typical quadratic growth present in naive -@%:@ implementations. -if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then : - eval 'as_fn_append () - { - eval $1+=\$2 - }' -else - as_fn_append () - { - eval $1=\$$1\$2 - } -fi # as_fn_append - -@%:@ as_fn_arith ARG... -@%:@ ------------------ -@%:@ Perform arithmetic evaluation on the ARGs, and store the result in the -@%:@ global @S|@as_val. Take advantage of shells that can avoid forks. The arguments -@%:@ must be portable across @S|@(()) and expr. -if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then : - eval 'as_fn_arith () - { - as_val=$(( $* )) - }' -else - as_fn_arith () - { - as_val=`expr "$@" || test $? -eq 1` - } -fi # as_fn_arith - - -@%:@ as_fn_error STATUS ERROR [LINENO LOG_FD] -@%:@ ---------------------------------------- -@%:@ Output "`basename @S|@0`: error: ERROR" to stderr. If LINENO and LOG_FD are -@%:@ provided, also output the error to LOG_FD, referencing LINENO. Then exit the -@%:@ script with STATUS, using 1 if that was 0. -as_fn_error () -{ - as_status=$1; test $as_status -eq 0 && as_status=1 - if test "$4"; then - as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4 - fi - $as_echo "$as_me: error: $2" >&2 - as_fn_exit $as_status -} @%:@ as_fn_error - -if expr a : '\(a\)' >/dev/null 2>&1 && - test "X`expr 00001 : '.*\(...\)'`" = X001; then - as_expr=expr -else - as_expr=false -fi - -if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then - as_basename=basename -else - as_basename=false -fi - -if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then - as_dirname=dirname -else - as_dirname=false -fi - -as_me=`$as_basename -- "$0" || -$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ - X"$0" : 'X\(//\)$' \| \ - X"$0" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X/"$0" | - sed '/^.*\/\([^/][^/]*\)\/*$/{ - s//\1/ - q - } - /^X\/\(\/\/\)$/{ - s//\1/ - q - } - /^X\/\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - -# Avoid depending upon Character Ranges. -as_cr_letters='abcdefghijklmnopqrstuvwxyz' -as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' -as_cr_Letters=$as_cr_letters$as_cr_LETTERS -as_cr_digits='0123456789' -as_cr_alnum=$as_cr_Letters$as_cr_digits - - - as_lineno_1=$LINENO as_lineno_1a=$LINENO - as_lineno_2=$LINENO as_lineno_2a=$LINENO - eval 'test "x$as_lineno_1'$as_run'" != "x$as_lineno_2'$as_run'" && - test "x`expr $as_lineno_1'$as_run' + 1`" = "x$as_lineno_2'$as_run'"' || { - # Blame Lee E. McMahon (1931-1989) for sed's syntax. :-) - sed -n ' - p - /[$]LINENO/= - ' <$as_myself | - sed ' - s/[$]LINENO.*/&-/ - t lineno - b - :lineno - N - :loop - s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/ - t loop - s/-\n.*// - ' >$as_me.lineno && - chmod +x "$as_me.lineno" || - { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2; as_fn_exit 1; } - - # Don't try to exec as it changes $[0], causing all sort of problems - # (the dirname of $[0] is not the place where we might find the - # original and so on. Autoconf is especially sensitive to this). - . "./$as_me.lineno" - # Exit status is that of the last command. - exit -} - -ECHO_C= ECHO_N= ECHO_T= -case `echo -n x` in @%:@((((( --n*) - case `echo 'xy\c'` in - *c*) ECHO_T=' ';; # ECHO_T is single tab character. - xy) ECHO_C='\c';; - *) echo `echo ksh88 bug on AIX 6.1` > /dev/null - ECHO_T=' ';; - esac;; -*) - ECHO_N='-n';; -esac - -rm -f conf$$ conf$$.exe conf$$.file -if test -d conf$$.dir; then - rm -f conf$$.dir/conf$$.file -else - rm -f conf$$.dir - mkdir conf$$.dir 2>/dev/null -fi -if (echo >conf$$.file) 2>/dev/null; then - if ln -s conf$$.file conf$$ 2>/dev/null; then - as_ln_s='ln -s' - # ... but there are two gotchas: - # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. - # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. - # In both cases, we have to default to `cp -p'. - ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || - as_ln_s='cp -p' - elif ln conf$$.file conf$$ 2>/dev/null; then - as_ln_s=ln - else - as_ln_s='cp -p' - fi -else - as_ln_s='cp -p' -fi -rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file -rmdir conf$$.dir 2>/dev/null - -if mkdir -p . 2>/dev/null; then - as_mkdir_p='mkdir -p "$as_dir"' -else - test -d ./-p && rmdir ./-p - as_mkdir_p=false -fi - -if test -x / >/dev/null 2>&1; then - as_test_x='test -x' -else - if ls -dL / >/dev/null 2>&1; then - as_ls_L_option=L - else - as_ls_L_option= - fi - as_test_x=' - eval sh -c '\'' - if test -d "$1"; then - test -d "$1/."; - else - case $1 in @%:@( - -*)set "./$1";; - esac; - case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in @%:@(( - ???[sx]*):;;*)false;;esac;fi - '\'' sh - ' -fi -as_executable_p=$as_test_x - -# Sed expression to map a string onto a valid CPP name. -as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" - -# Sed expression to map a string onto a valid variable name. -as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" - -SHELL=${CONFIG_SHELL-/bin/sh} - - -test -n "$DJDIR" || exec 7<&0 &1 - -# Name of the host. -# hostname on some systems (SVR3.2, old GNU/Linux) returns a bogus exit status, -# so uname gets run too. -ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q` - -# -# Initializations. -# -ac_default_prefix=/usr/local -ac_clean_files= -ac_config_libobj_dir=. -LIB@&t@OBJS= -cross_compiling=no -subdirs= -MFLAGS= -MAKEFLAGS= - -# Identity of this package. -PACKAGE_NAME='shairport.c' -PACKAGE_TARNAME='shairport-c' -PACKAGE_VERSION='1.2.0' -PACKAGE_STRING='shairport.c 1.2.0' -PACKAGE_BUGREPORT='http://trac.xbmc.org' -PACKAGE_URL='' - -# Factoring default headers for most tests. -ac_includes_default="\ -#include -#ifdef HAVE_SYS_TYPES_H -# include -#endif -#ifdef HAVE_SYS_STAT_H -# include -#endif -#ifdef STDC_HEADERS -# include -# include -#else -# ifdef HAVE_STDLIB_H -# include -# endif -#endif -#ifdef HAVE_STRING_H -# if !defined STDC_HEADERS && defined HAVE_MEMORY_H -# include -# endif -# include -#endif -#ifdef HAVE_STRINGS_H -# include -#endif -#ifdef HAVE_INTTYPES_H -# include -#endif -#ifdef HAVE_STDINT_H -# include -#endif -#ifdef HAVE_UNISTD_H -# include -#endif" - -ac_subst_vars='am__EXEEXT_FALSE -am__EXEEXT_TRUE -LTLIBOBJS -LIB@&t@OBJS -CPP -OTOOL64 -OTOOL -LIPO -NMEDIT -DSYMUTIL -MANIFEST_TOOL -RANLIB -ac_ct_AR -AR -DLLTOOL -OBJDUMP -LN_S -NM -ac_ct_DUMPBIN -DUMPBIN -LD -FGREP -EGREP -GREP -SED -host_os -host_vendor -host_cpu -host -build_os -build_vendor -build_cpu -build -LIBTOOL -am__fastdepCC_FALSE -am__fastdepCC_TRUE -CCDEPMODE -AMDEPBACKSLASH -AMDEP_FALSE -AMDEP_TRUE -am__quote -am__include -DEPDIR -OBJEXT -EXEEXT -ac_ct_CC -CPPFLAGS -LDFLAGS -CFLAGS -CC -am__untar -am__tar -AMTAR -am__leading_dot -SET_MAKE -AWK -mkdir_p -MKDIR_P -INSTALL_STRIP_PROGRAM -STRIP -install_sh -MAKEINFO -AUTOHEADER -AUTOMAKE -AUTOCONF -ACLOCAL -VERSION -PACKAGE -CYGPATH_W -am__isrc -INSTALL_DATA -INSTALL_SCRIPT -INSTALL_PROGRAM -target_alias -host_alias -build_alias -LIBS -ECHO_T -ECHO_N -ECHO_C -DEFS -mandir -localedir -libdir -psdir -pdfdir -dvidir -htmldir -infodir -docdir -oldincludedir -includedir -localstatedir -sharedstatedir -sysconfdir -datadir -datarootdir -libexecdir -sbindir -bindir -program_transform_name -prefix -exec_prefix -PACKAGE_URL -PACKAGE_BUGREPORT -PACKAGE_STRING -PACKAGE_VERSION -PACKAGE_TARNAME -PACKAGE_NAME -PATH_SEPARATOR -SHELL' -ac_subst_files='' -ac_user_opts=' -enable_option_checking -enable_dependency_tracking -enable_static -enable_shared -with_pic -enable_fast_install -with_gnu_ld -with_sysroot -enable_libtool_lock -' - ac_precious_vars='build_alias -host_alias -target_alias -CC -CFLAGS -LDFLAGS -LIBS -CPPFLAGS -CPP' - - -# Initialize some variables set by options. -ac_init_help= -ac_init_version=false -ac_unrecognized_opts= -ac_unrecognized_sep= -# The variables have the same names as the options, with -# dashes changed to underlines. -cache_file=/dev/null -exec_prefix=NONE -no_create= -no_recursion= -prefix=NONE -program_prefix=NONE -program_suffix=NONE -program_transform_name=s,x,x, -silent= -site= -srcdir= -verbose= -x_includes=NONE -x_libraries=NONE - -# Installation directory options. -# These are left unexpanded so users can "make install exec_prefix=/foo" -# and all the variables that are supposed to be based on exec_prefix -# by default will actually change. -# Use braces instead of parens because sh, perl, etc. also accept them. -# (The list follows the same order as the GNU Coding Standards.) -bindir='${exec_prefix}/bin' -sbindir='${exec_prefix}/sbin' -libexecdir='${exec_prefix}/libexec' -datarootdir='${prefix}/share' -datadir='${datarootdir}' -sysconfdir='${prefix}/etc' -sharedstatedir='${prefix}/com' -localstatedir='${prefix}/var' -includedir='${prefix}/include' -oldincludedir='/usr/include' -docdir='${datarootdir}/doc/${PACKAGE_TARNAME}' -infodir='${datarootdir}/info' -htmldir='${docdir}' -dvidir='${docdir}' -pdfdir='${docdir}' -psdir='${docdir}' -libdir='${exec_prefix}/lib' -localedir='${datarootdir}/locale' -mandir='${datarootdir}/man' - -ac_prev= -ac_dashdash= -for ac_option -do - # If the previous option needs an argument, assign it. - if test -n "$ac_prev"; then - eval $ac_prev=\$ac_option - ac_prev= - continue - fi - - case $ac_option in - *=?*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;; - *=) ac_optarg= ;; - *) ac_optarg=yes ;; - esac - - # Accept the important Cygnus configure options, so we can diagnose typos. - - case $ac_dashdash$ac_option in - --) - ac_dashdash=yes ;; - - -bindir | --bindir | --bindi | --bind | --bin | --bi) - ac_prev=bindir ;; - -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*) - bindir=$ac_optarg ;; - - -build | --build | --buil | --bui | --bu) - ac_prev=build_alias ;; - -build=* | --build=* | --buil=* | --bui=* | --bu=*) - build_alias=$ac_optarg ;; - - -cache-file | --cache-file | --cache-fil | --cache-fi \ - | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c) - ac_prev=cache_file ;; - -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \ - | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*) - cache_file=$ac_optarg ;; - - --config-cache | -C) - cache_file=config.cache ;; - - -datadir | --datadir | --datadi | --datad) - ac_prev=datadir ;; - -datadir=* | --datadir=* | --datadi=* | --datad=*) - datadir=$ac_optarg ;; - - -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \ - | --dataroo | --dataro | --datar) - ac_prev=datarootdir ;; - -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \ - | --dataroot=* | --dataroo=* | --dataro=* | --datar=*) - datarootdir=$ac_optarg ;; - - -disable-* | --disable-*) - ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'` - # Reject names that are not valid shell variable names. - expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && - as_fn_error $? "invalid feature name: $ac_useropt" - ac_useropt_orig=$ac_useropt - ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` - case $ac_user_opts in - *" -"enable_$ac_useropt" -"*) ;; - *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--disable-$ac_useropt_orig" - ac_unrecognized_sep=', ';; - esac - eval enable_$ac_useropt=no ;; - - -docdir | --docdir | --docdi | --doc | --do) - ac_prev=docdir ;; - -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*) - docdir=$ac_optarg ;; - - -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv) - ac_prev=dvidir ;; - -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*) - dvidir=$ac_optarg ;; - - -enable-* | --enable-*) - ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'` - # Reject names that are not valid shell variable names. - expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && - as_fn_error $? "invalid feature name: $ac_useropt" - ac_useropt_orig=$ac_useropt - ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` - case $ac_user_opts in - *" -"enable_$ac_useropt" -"*) ;; - *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--enable-$ac_useropt_orig" - ac_unrecognized_sep=', ';; - esac - eval enable_$ac_useropt=\$ac_optarg ;; - - -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ - | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ - | --exec | --exe | --ex) - ac_prev=exec_prefix ;; - -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \ - | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \ - | --exec=* | --exe=* | --ex=*) - exec_prefix=$ac_optarg ;; - - -gas | --gas | --ga | --g) - # Obsolete; use --with-gas. - with_gas=yes ;; - - -help | --help | --hel | --he | -h) - ac_init_help=long ;; - -help=r* | --help=r* | --hel=r* | --he=r* | -hr*) - ac_init_help=recursive ;; - -help=s* | --help=s* | --hel=s* | --he=s* | -hs*) - ac_init_help=short ;; - - -host | --host | --hos | --ho) - ac_prev=host_alias ;; - -host=* | --host=* | --hos=* | --ho=*) - host_alias=$ac_optarg ;; - - -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht) - ac_prev=htmldir ;; - -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \ - | --ht=*) - htmldir=$ac_optarg ;; - - -includedir | --includedir | --includedi | --included | --include \ - | --includ | --inclu | --incl | --inc) - ac_prev=includedir ;; - -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \ - | --includ=* | --inclu=* | --incl=* | --inc=*) - includedir=$ac_optarg ;; - - -infodir | --infodir | --infodi | --infod | --info | --inf) - ac_prev=infodir ;; - -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*) - infodir=$ac_optarg ;; - - -libdir | --libdir | --libdi | --libd) - ac_prev=libdir ;; - -libdir=* | --libdir=* | --libdi=* | --libd=*) - libdir=$ac_optarg ;; - - -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \ - | --libexe | --libex | --libe) - ac_prev=libexecdir ;; - -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \ - | --libexe=* | --libex=* | --libe=*) - libexecdir=$ac_optarg ;; - - -localedir | --localedir | --localedi | --localed | --locale) - ac_prev=localedir ;; - -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*) - localedir=$ac_optarg ;; - - -localstatedir | --localstatedir | --localstatedi | --localstated \ - | --localstate | --localstat | --localsta | --localst | --locals) - ac_prev=localstatedir ;; - -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \ - | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*) - localstatedir=$ac_optarg ;; - - -mandir | --mandir | --mandi | --mand | --man | --ma | --m) - ac_prev=mandir ;; - -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*) - mandir=$ac_optarg ;; - - -nfp | --nfp | --nf) - # Obsolete; use --without-fp. - with_fp=no ;; - - -no-create | --no-create | --no-creat | --no-crea | --no-cre \ - | --no-cr | --no-c | -n) - no_create=yes ;; - - -no-recursion | --no-recursion | --no-recursio | --no-recursi \ - | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) - no_recursion=yes ;; - - -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \ - | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \ - | --oldin | --oldi | --old | --ol | --o) - ac_prev=oldincludedir ;; - -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \ - | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \ - | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*) - oldincludedir=$ac_optarg ;; - - -prefix | --prefix | --prefi | --pref | --pre | --pr | --p) - ac_prev=prefix ;; - -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*) - prefix=$ac_optarg ;; - - -program-prefix | --program-prefix | --program-prefi | --program-pref \ - | --program-pre | --program-pr | --program-p) - ac_prev=program_prefix ;; - -program-prefix=* | --program-prefix=* | --program-prefi=* \ - | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*) - program_prefix=$ac_optarg ;; - - -program-suffix | --program-suffix | --program-suffi | --program-suff \ - | --program-suf | --program-su | --program-s) - ac_prev=program_suffix ;; - -program-suffix=* | --program-suffix=* | --program-suffi=* \ - | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*) - program_suffix=$ac_optarg ;; - - -program-transform-name | --program-transform-name \ - | --program-transform-nam | --program-transform-na \ - | --program-transform-n | --program-transform- \ - | --program-transform | --program-transfor \ - | --program-transfo | --program-transf \ - | --program-trans | --program-tran \ - | --progr-tra | --program-tr | --program-t) - ac_prev=program_transform_name ;; - -program-transform-name=* | --program-transform-name=* \ - | --program-transform-nam=* | --program-transform-na=* \ - | --program-transform-n=* | --program-transform-=* \ - | --program-transform=* | --program-transfor=* \ - | --program-transfo=* | --program-transf=* \ - | --program-trans=* | --program-tran=* \ - | --progr-tra=* | --program-tr=* | --program-t=*) - program_transform_name=$ac_optarg ;; - - -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd) - ac_prev=pdfdir ;; - -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*) - pdfdir=$ac_optarg ;; - - -psdir | --psdir | --psdi | --psd | --ps) - ac_prev=psdir ;; - -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*) - psdir=$ac_optarg ;; - - -q | -quiet | --quiet | --quie | --qui | --qu | --q \ - | -silent | --silent | --silen | --sile | --sil) - silent=yes ;; - - -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb) - ac_prev=sbindir ;; - -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \ - | --sbi=* | --sb=*) - sbindir=$ac_optarg ;; - - -sharedstatedir | --sharedstatedir | --sharedstatedi \ - | --sharedstated | --sharedstate | --sharedstat | --sharedsta \ - | --sharedst | --shareds | --shared | --share | --shar \ - | --sha | --sh) - ac_prev=sharedstatedir ;; - -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \ - | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \ - | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \ - | --sha=* | --sh=*) - sharedstatedir=$ac_optarg ;; - - -site | --site | --sit) - ac_prev=site ;; - -site=* | --site=* | --sit=*) - site=$ac_optarg ;; - - -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) - ac_prev=srcdir ;; - -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) - srcdir=$ac_optarg ;; - - -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \ - | --syscon | --sysco | --sysc | --sys | --sy) - ac_prev=sysconfdir ;; - -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \ - | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*) - sysconfdir=$ac_optarg ;; - - -target | --target | --targe | --targ | --tar | --ta | --t) - ac_prev=target_alias ;; - -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*) - target_alias=$ac_optarg ;; - - -v | -verbose | --verbose | --verbos | --verbo | --verb) - verbose=yes ;; - - -version | --version | --versio | --versi | --vers | -V) - ac_init_version=: ;; - - -with-* | --with-*) - ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'` - # Reject names that are not valid shell variable names. - expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && - as_fn_error $? "invalid package name: $ac_useropt" - ac_useropt_orig=$ac_useropt - ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` - case $ac_user_opts in - *" -"with_$ac_useropt" -"*) ;; - *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--with-$ac_useropt_orig" - ac_unrecognized_sep=', ';; - esac - eval with_$ac_useropt=\$ac_optarg ;; - - -without-* | --without-*) - ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'` - # Reject names that are not valid shell variable names. - expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && - as_fn_error $? "invalid package name: $ac_useropt" - ac_useropt_orig=$ac_useropt - ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` - case $ac_user_opts in - *" -"with_$ac_useropt" -"*) ;; - *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--without-$ac_useropt_orig" - ac_unrecognized_sep=', ';; - esac - eval with_$ac_useropt=no ;; - - --x) - # Obsolete; use --with-x. - with_x=yes ;; - - -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \ - | --x-incl | --x-inc | --x-in | --x-i) - ac_prev=x_includes ;; - -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \ - | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*) - x_includes=$ac_optarg ;; - - -x-libraries | --x-libraries | --x-librarie | --x-librari \ - | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l) - ac_prev=x_libraries ;; - -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \ - | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) - x_libraries=$ac_optarg ;; - - -*) as_fn_error $? "unrecognized option: \`$ac_option' -Try \`$0 --help' for more information" - ;; - - *=*) - ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='` - # Reject names that are not valid shell variable names. - case $ac_envvar in #( - '' | [0-9]* | *[!_$as_cr_alnum]* ) - as_fn_error $? "invalid variable name: \`$ac_envvar'" ;; - esac - eval $ac_envvar=\$ac_optarg - export $ac_envvar ;; - - *) - # FIXME: should be removed in autoconf 3.0. - $as_echo "$as_me: WARNING: you should use --build, --host, --target" >&2 - expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null && - $as_echo "$as_me: WARNING: invalid host type: $ac_option" >&2 - : "${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}" - ;; - - esac -done - -if test -n "$ac_prev"; then - ac_option=--`echo $ac_prev | sed 's/_/-/g'` - as_fn_error $? "missing argument to $ac_option" -fi - -if test -n "$ac_unrecognized_opts"; then - case $enable_option_checking in - no) ;; - fatal) as_fn_error $? "unrecognized options: $ac_unrecognized_opts" ;; - *) $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;; - esac -fi - -# Check all directory arguments for consistency. -for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \ - datadir sysconfdir sharedstatedir localstatedir includedir \ - oldincludedir docdir infodir htmldir dvidir pdfdir psdir \ - libdir localedir mandir -do - eval ac_val=\$$ac_var - # Remove trailing slashes. - case $ac_val in - */ ) - ac_val=`expr "X$ac_val" : 'X\(.*[^/]\)' \| "X$ac_val" : 'X\(.*\)'` - eval $ac_var=\$ac_val;; - esac - # Be sure to have absolute directory names. - case $ac_val in - [\\/$]* | ?:[\\/]* ) continue;; - NONE | '' ) case $ac_var in *prefix ) continue;; esac;; - esac - as_fn_error $? "expected an absolute directory name for --$ac_var: $ac_val" -done - -# There might be people who depend on the old broken behavior: `$host' -# used to hold the argument of --host etc. -# FIXME: To remove some day. -build=$build_alias -host=$host_alias -target=$target_alias - -# FIXME: To remove some day. -if test "x$host_alias" != x; then - if test "x$build_alias" = x; then - cross_compiling=maybe - $as_echo "$as_me: WARNING: if you wanted to set the --build type, don't use --host. - If a cross compiler is detected then cross compile mode will be used" >&2 - elif test "x$build_alias" != "x$host_alias"; then - cross_compiling=yes - fi -fi - -ac_tool_prefix= -test -n "$host_alias" && ac_tool_prefix=$host_alias- - -test "$silent" = yes && exec 6>/dev/null - - -ac_pwd=`pwd` && test -n "$ac_pwd" && -ac_ls_di=`ls -di .` && -ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` || - as_fn_error $? "working directory cannot be determined" -test "X$ac_ls_di" = "X$ac_pwd_ls_di" || - as_fn_error $? "pwd does not report name of working directory" - - -# Find the source files, if location was not specified. -if test -z "$srcdir"; then - ac_srcdir_defaulted=yes - # Try the directory containing this script, then the parent directory. - ac_confdir=`$as_dirname -- "$as_myself" || -$as_expr X"$as_myself" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$as_myself" : 'X\(//\)[^/]' \| \ - X"$as_myself" : 'X\(//\)$' \| \ - X"$as_myself" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X"$as_myself" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - srcdir=$ac_confdir - if test ! -r "$srcdir/$ac_unique_file"; then - srcdir=.. - fi -else - ac_srcdir_defaulted=no -fi -if test ! -r "$srcdir/$ac_unique_file"; then - test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .." - as_fn_error $? "cannot find sources ($ac_unique_file) in $srcdir" -fi -ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work" -ac_abs_confdir=`( - cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error $? "$ac_msg" - pwd)` -# When building in place, set srcdir=. -if test "$ac_abs_confdir" = "$ac_pwd"; then - srcdir=. -fi -# Remove unnecessary trailing slashes from srcdir. -# Double slashes in file names in object file debugging info -# mess up M-x gdb in Emacs. -case $srcdir in -*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;; -esac -for ac_var in $ac_precious_vars; do - eval ac_env_${ac_var}_set=\${${ac_var}+set} - eval ac_env_${ac_var}_value=\$${ac_var} - eval ac_cv_env_${ac_var}_set=\${${ac_var}+set} - eval ac_cv_env_${ac_var}_value=\$${ac_var} -done - -# -# Report the --help message. -# -if test "$ac_init_help" = "long"; then - # Omit some internal or obsolete options to make the list less imposing. - # This message is too long to be a string in the A/UX 3.1 sh. - cat <<_ACEOF -\`configure' configures shairport.c 1.2.0 to adapt to many kinds of systems. - -Usage: $0 [OPTION]... [VAR=VALUE]... - -To assign environment variables (e.g., CC, CFLAGS...), specify them as -VAR=VALUE. See below for descriptions of some of the useful variables. - -Defaults for the options are specified in brackets. - -Configuration: - -h, --help display this help and exit - --help=short display options specific to this package - --help=recursive display the short help of all the included packages - -V, --version display version information and exit - -q, --quiet, --silent do not print \`checking ...' messages - --cache-file=FILE cache test results in FILE [disabled] - -C, --config-cache alias for \`--cache-file=config.cache' - -n, --no-create do not create output files - --srcdir=DIR find the sources in DIR [configure dir or \`..'] - -Installation directories: - --prefix=PREFIX install architecture-independent files in PREFIX - @<:@@S|@ac_default_prefix@:>@ - --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX - @<:@PREFIX@:>@ - -By default, \`make install' will install all the files in -\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify -an installation prefix other than \`$ac_default_prefix' using \`--prefix', -for instance \`--prefix=\$HOME'. - -For better control, use the options below. - -Fine tuning of the installation directories: - --bindir=DIR user executables [EPREFIX/bin] - --sbindir=DIR system admin executables [EPREFIX/sbin] - --libexecdir=DIR program executables [EPREFIX/libexec] - --sysconfdir=DIR read-only single-machine data [PREFIX/etc] - --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com] - --localstatedir=DIR modifiable single-machine data [PREFIX/var] - --libdir=DIR object code libraries [EPREFIX/lib] - --includedir=DIR C header files [PREFIX/include] - --oldincludedir=DIR C header files for non-gcc [/usr/include] - --datarootdir=DIR read-only arch.-independent data root [PREFIX/share] - --datadir=DIR read-only architecture-independent data [DATAROOTDIR] - --infodir=DIR info documentation [DATAROOTDIR/info] - --localedir=DIR locale-dependent data [DATAROOTDIR/locale] - --mandir=DIR man documentation [DATAROOTDIR/man] - --docdir=DIR documentation root @<:@DATAROOTDIR/doc/shairport-c@:>@ - --htmldir=DIR html documentation [DOCDIR] - --dvidir=DIR dvi documentation [DOCDIR] - --pdfdir=DIR pdf documentation [DOCDIR] - --psdir=DIR ps documentation [DOCDIR] -_ACEOF - - cat <<\_ACEOF - -Program names: - --program-prefix=PREFIX prepend PREFIX to installed program names - --program-suffix=SUFFIX append SUFFIX to installed program names - --program-transform-name=PROGRAM run sed PROGRAM on installed program names - -System types: - --build=BUILD configure for building on BUILD [guessed] - --host=HOST cross-compile to build programs to run on HOST [BUILD] -_ACEOF -fi - -if test -n "$ac_init_help"; then - case $ac_init_help in - short | recursive ) echo "Configuration of shairport.c 1.2.0:";; - esac - cat <<\_ACEOF - -Optional Features: - --disable-option-checking ignore unrecognized --enable/--with options - --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no) - --enable-FEATURE[=ARG] include FEATURE [ARG=yes] - --disable-dependency-tracking speeds up one-time build - --enable-dependency-tracking do not reject slow dependency extractors - --enable-static@<:@=PKGS@:>@ build static libraries @<:@default=no@:>@ - --enable-shared@<:@=PKGS@:>@ build shared libraries @<:@default=yes@:>@ - --enable-fast-install@<:@=PKGS@:>@ - optimize for fast installation @<:@default=yes@:>@ - --disable-libtool-lock avoid locking (might break parallel builds) - -Optional Packages: - --with-PACKAGE[=ARG] use PACKAGE [ARG=yes] - --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no) - --with-pic try to use only PIC/non-PIC objects @<:@default=use - both@:>@ - --with-gnu-ld assume the C compiler uses GNU ld @<:@default=no@:>@ - --with-sysroot=DIR Search for dependent libraries within DIR - (or the compiler's sysroot if not specified). - -Some influential environment variables: - CC C compiler command - CFLAGS C compiler flags - LDFLAGS linker flags, e.g. -L if you have libraries in a - nonstandard directory - LIBS libraries to pass to the linker, e.g. -l - CPPFLAGS (Objective) C/C++ preprocessor flags, e.g. -I if - you have headers in a nonstandard directory - CPP C preprocessor - -Use these variables to override the choices made by `configure' or to help -it to find libraries and programs with nonstandard names/locations. - -Report bugs to . -_ACEOF -ac_status=$? -fi - -if test "$ac_init_help" = "recursive"; then - # If there are subdirs, report their specific --help. - for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue - test -d "$ac_dir" || - { cd "$srcdir" && ac_pwd=`pwd` && srcdir=. && test -d "$ac_dir"; } || - continue - ac_builddir=. - -case "$ac_dir" in -.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; -*) - ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'` - # A ".." for each directory in $ac_dir_suffix. - ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` - case $ac_top_builddir_sub in - "") ac_top_builddir_sub=. ac_top_build_prefix= ;; - *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; - esac ;; -esac -ac_abs_top_builddir=$ac_pwd -ac_abs_builddir=$ac_pwd$ac_dir_suffix -# for backward compatibility: -ac_top_builddir=$ac_top_build_prefix - -case $srcdir in - .) # We are building in place. - ac_srcdir=. - ac_top_srcdir=$ac_top_builddir_sub - ac_abs_top_srcdir=$ac_pwd ;; - [\\/]* | ?:[\\/]* ) # Absolute name. - ac_srcdir=$srcdir$ac_dir_suffix; - ac_top_srcdir=$srcdir - ac_abs_top_srcdir=$srcdir ;; - *) # Relative name. - ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix - ac_top_srcdir=$ac_top_build_prefix$srcdir - ac_abs_top_srcdir=$ac_pwd/$srcdir ;; -esac -ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix - - cd "$ac_dir" || { ac_status=$?; continue; } - # Check for guested configure. - if test -f "$ac_srcdir/configure.gnu"; then - echo && - $SHELL "$ac_srcdir/configure.gnu" --help=recursive - elif test -f "$ac_srcdir/configure"; then - echo && - $SHELL "$ac_srcdir/configure" --help=recursive - else - $as_echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2 - fi || ac_status=$? - cd "$ac_pwd" || { ac_status=$?; break; } - done -fi - -test -n "$ac_init_help" && exit $ac_status -if $ac_init_version; then - cat <<\_ACEOF -shairport.c configure 1.2.0 -generated by GNU Autoconf 2.68 - -Copyright (C) 2010 Free Software Foundation, Inc. -This configure script is free software; the Free Software Foundation -gives unlimited permission to copy, distribute and modify it. -_ACEOF - exit -fi - -## ------------------------ ## -## Autoconf initialization. ## -## ------------------------ ## - -@%:@ ac_fn_c_try_compile LINENO -@%:@ -------------------------- -@%:@ Try to compile conftest.@S|@ac_ext, and return whether this succeeded. -ac_fn_c_try_compile () -{ - as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - rm -f conftest.$ac_objext - if { { ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_compile") 2>conftest.err - ac_status=$? - if test -s conftest.err; then - grep -v '^ *+' conftest.err >conftest.er1 - cat conftest.er1 >&5 - mv -f conftest.er1 conftest.err - fi - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest.$ac_objext; then : - ac_retval=0 -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_retval=1 -fi - eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno - as_fn_set_status $ac_retval - -} @%:@ ac_fn_c_try_compile - -@%:@ ac_fn_c_try_link LINENO -@%:@ ----------------------- -@%:@ Try to link conftest.@S|@ac_ext, and return whether this succeeded. -ac_fn_c_try_link () -{ - as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - rm -f conftest.$ac_objext conftest$ac_exeext - if { { ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_link") 2>conftest.err - ac_status=$? - if test -s conftest.err; then - grep -v '^ *+' conftest.err >conftest.er1 - cat conftest.er1 >&5 - mv -f conftest.er1 conftest.err - fi - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } && { - test -z "$ac_c_werror_flag" || - test ! -s conftest.err - } && test -s conftest$ac_exeext && { - test "$cross_compiling" = yes || - $as_test_x conftest$ac_exeext - }; then : - ac_retval=0 -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_retval=1 -fi - # Delete the IPA/IPO (Inter Procedural Analysis/Optimization) information - # created by the PGI compiler (conftest_ipa8_conftest.oo), as it would - # interfere with the next link command; also delete a directory that is - # left behind by Apple's compiler. We do this before executing the actions. - rm -rf conftest.dSYM conftest_ipa8_conftest.oo - eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno - as_fn_set_status $ac_retval - -} @%:@ ac_fn_c_try_link - -@%:@ ac_fn_c_check_header_compile LINENO HEADER VAR INCLUDES -@%:@ ------------------------------------------------------- -@%:@ Tests whether HEADER exists and can be compiled using the include files in -@%:@ INCLUDES, setting the cache variable VAR accordingly. -ac_fn_c_check_header_compile () -{ - as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 -$as_echo_n "checking for $2... " >&6; } -if eval \${$3+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -$4 -@%:@include <$2> -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - eval "$3=yes" -else - eval "$3=no" -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi -eval ac_res=\$$3 - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } - eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno - -} @%:@ ac_fn_c_check_header_compile - -@%:@ ac_fn_c_try_cpp LINENO -@%:@ ---------------------- -@%:@ Try to preprocess conftest.@S|@ac_ext, and return whether this succeeded. -ac_fn_c_try_cpp () -{ - as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - if { { ac_try="$ac_cpp conftest.$ac_ext" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_cpp conftest.$ac_ext") 2>conftest.err - ac_status=$? - if test -s conftest.err; then - grep -v '^ *+' conftest.err >conftest.er1 - cat conftest.er1 >&5 - mv -f conftest.er1 conftest.err - fi - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } > conftest.i && { - test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || - test ! -s conftest.err - }; then : - ac_retval=0 -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_retval=1 -fi - eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno - as_fn_set_status $ac_retval - -} @%:@ ac_fn_c_try_cpp - -@%:@ ac_fn_c_try_run LINENO -@%:@ ---------------------- -@%:@ Try to link conftest.@S|@ac_ext, and return whether this succeeded. Assumes -@%:@ that executables *can* be run. -ac_fn_c_try_run () -{ - as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - if { { ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_link") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } && { ac_try='./conftest$ac_exeext' - { { case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_try") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; }; then : - ac_retval=0 -else - $as_echo "$as_me: program exited with status $ac_status" >&5 - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - - ac_retval=$ac_status -fi - rm -rf conftest.dSYM conftest_ipa8_conftest.oo - eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno - as_fn_set_status $ac_retval - -} @%:@ ac_fn_c_try_run - -@%:@ ac_fn_c_check_func LINENO FUNC VAR -@%:@ ---------------------------------- -@%:@ Tests whether FUNC exists, setting the cache variable VAR accordingly -ac_fn_c_check_func () -{ - as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 -$as_echo_n "checking for $2... " >&6; } -if eval \${$3+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -/* Define $2 to an innocuous variant, in case declares $2. - For example, HP-UX 11i declares gettimeofday. */ -#define $2 innocuous_$2 - -/* System header to define __stub macros and hopefully few prototypes, - which can conflict with char $2 (); below. - Prefer to if __STDC__ is defined, since - exists even on freestanding compilers. */ - -#ifdef __STDC__ -# include -#else -# include -#endif - -#undef $2 - -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char $2 (); -/* The GNU C library defines this for functions which it implements - to always fail with ENOSYS. Some functions are actually named - something starting with __ and the normal name is an alias. */ -#if defined __stub_$2 || defined __stub___$2 -choke me -#endif - -int -main () -{ -return $2 (); - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - eval "$3=yes" -else - eval "$3=no" -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -fi -eval ac_res=\$$3 - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 -$as_echo "$ac_res" >&6; } - eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno - -} @%:@ ac_fn_c_check_func -cat >config.log <<_ACEOF -This file contains any messages produced by compilers while -running configure, to aid debugging if configure makes a mistake. - -It was created by shairport.c $as_me 1.2.0, which was -generated by GNU Autoconf 2.68. Invocation command line was - - $ $0 $@ - -_ACEOF -exec 5>>config.log -{ -cat <<_ASUNAME -## --------- ## -## Platform. ## -## --------- ## - -hostname = `(hostname || uname -n) 2>/dev/null | sed 1q` -uname -m = `(uname -m) 2>/dev/null || echo unknown` -uname -r = `(uname -r) 2>/dev/null || echo unknown` -uname -s = `(uname -s) 2>/dev/null || echo unknown` -uname -v = `(uname -v) 2>/dev/null || echo unknown` - -/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown` -/bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown` - -/bin/arch = `(/bin/arch) 2>/dev/null || echo unknown` -/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown` -/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown` -/usr/bin/hostinfo = `(/usr/bin/hostinfo) 2>/dev/null || echo unknown` -/bin/machine = `(/bin/machine) 2>/dev/null || echo unknown` -/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown` -/bin/universe = `(/bin/universe) 2>/dev/null || echo unknown` - -_ASUNAME - -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - $as_echo "PATH: $as_dir" - done -IFS=$as_save_IFS - -} >&5 - -cat >&5 <<_ACEOF - - -## ----------- ## -## Core tests. ## -## ----------- ## - -_ACEOF - - -# Keep a trace of the command line. -# Strip out --no-create and --no-recursion so they do not pile up. -# Strip out --silent because we don't want to record it for future runs. -# Also quote any args containing shell meta-characters. -# Make two passes to allow for proper duplicate-argument suppression. -ac_configure_args= -ac_configure_args0= -ac_configure_args1= -ac_must_keep_next=false -for ac_pass in 1 2 -do - for ac_arg - do - case $ac_arg in - -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;; - -q | -quiet | --quiet | --quie | --qui | --qu | --q \ - | -silent | --silent | --silen | --sile | --sil) - continue ;; - *\'*) - ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; - esac - case $ac_pass in - 1) as_fn_append ac_configure_args0 " '$ac_arg'" ;; - 2) - as_fn_append ac_configure_args1 " '$ac_arg'" - if test $ac_must_keep_next = true; then - ac_must_keep_next=false # Got value, back to normal. - else - case $ac_arg in - *=* | --config-cache | -C | -disable-* | --disable-* \ - | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \ - | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \ - | -with-* | --with-* | -without-* | --without-* | --x) - case "$ac_configure_args0 " in - "$ac_configure_args1"*" '$ac_arg' "* ) continue ;; - esac - ;; - -* ) ac_must_keep_next=true ;; - esac - fi - as_fn_append ac_configure_args " '$ac_arg'" - ;; - esac - done -done -{ ac_configure_args0=; unset ac_configure_args0;} -{ ac_configure_args1=; unset ac_configure_args1;} - -# When interrupted or exit'd, cleanup temporary files, and complete -# config.log. We remove comments because anyway the quotes in there -# would cause problems or look ugly. -# WARNING: Use '\'' to represent an apostrophe within the trap. -# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug. -trap 'exit_status=$? - # Save into config.log some information that might help in debugging. - { - echo - - $as_echo "## ---------------- ## -## Cache variables. ## -## ---------------- ##" - echo - # The following way of writing the cache mishandles newlines in values, -( - for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do - eval ac_val=\$$ac_var - case $ac_val in #( - *${as_nl}*) - case $ac_var in #( - *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5 -$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;; - esac - case $ac_var in #( - _ | IFS | as_nl) ;; #( - BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #( - *) { eval $ac_var=; unset $ac_var;} ;; - esac ;; - esac - done - (set) 2>&1 | - case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #( - *${as_nl}ac_space=\ *) - sed -n \ - "s/'\''/'\''\\\\'\'''\''/g; - s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p" - ;; #( - *) - sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" - ;; - esac | - sort -) - echo - - $as_echo "## ----------------- ## -## Output variables. ## -## ----------------- ##" - echo - for ac_var in $ac_subst_vars - do - eval ac_val=\$$ac_var - case $ac_val in - *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; - esac - $as_echo "$ac_var='\''$ac_val'\''" - done | sort - echo - - if test -n "$ac_subst_files"; then - $as_echo "## ------------------- ## -## File substitutions. ## -## ------------------- ##" - echo - for ac_var in $ac_subst_files - do - eval ac_val=\$$ac_var - case $ac_val in - *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; - esac - $as_echo "$ac_var='\''$ac_val'\''" - done | sort - echo - fi - - if test -s confdefs.h; then - $as_echo "## ----------- ## -## confdefs.h. ## -## ----------- ##" - echo - cat confdefs.h - echo - fi - test "$ac_signal" != 0 && - $as_echo "$as_me: caught signal $ac_signal" - $as_echo "$as_me: exit $exit_status" - } >&5 - rm -f core *.core core.conftest.* && - rm -f -r conftest* confdefs* conf$$* $ac_clean_files && - exit $exit_status -' 0 -for ac_signal in 1 2 13 15; do - trap 'ac_signal='$ac_signal'; as_fn_exit 1' $ac_signal -done -ac_signal=0 - -# confdefs.h avoids OS command line length limits that DEFS can exceed. -rm -f -r conftest* confdefs.h - -$as_echo "/* confdefs.h */" > confdefs.h - -# Predefined preprocessor variables. - -cat >>confdefs.h <<_ACEOF -@%:@define PACKAGE_NAME "$PACKAGE_NAME" -_ACEOF - -cat >>confdefs.h <<_ACEOF -@%:@define PACKAGE_TARNAME "$PACKAGE_TARNAME" -_ACEOF - -cat >>confdefs.h <<_ACEOF -@%:@define PACKAGE_VERSION "$PACKAGE_VERSION" -_ACEOF - -cat >>confdefs.h <<_ACEOF -@%:@define PACKAGE_STRING "$PACKAGE_STRING" -_ACEOF - -cat >>confdefs.h <<_ACEOF -@%:@define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT" -_ACEOF - -cat >>confdefs.h <<_ACEOF -@%:@define PACKAGE_URL "$PACKAGE_URL" -_ACEOF - - -# Let the site file select an alternate cache file if it wants to. -# Prefer an explicitly selected file to automatically selected ones. -ac_site_file1=NONE -ac_site_file2=NONE -if test -n "$CONFIG_SITE"; then - # We do not want a PATH search for config.site. - case $CONFIG_SITE in @%:@(( - -*) ac_site_file1=./$CONFIG_SITE;; - */*) ac_site_file1=$CONFIG_SITE;; - *) ac_site_file1=./$CONFIG_SITE;; - esac -elif test "x$prefix" != xNONE; then - ac_site_file1=$prefix/share/config.site - ac_site_file2=$prefix/etc/config.site -else - ac_site_file1=$ac_default_prefix/share/config.site - ac_site_file2=$ac_default_prefix/etc/config.site -fi -for ac_site_file in "$ac_site_file1" "$ac_site_file2" -do - test "x$ac_site_file" = xNONE && continue - if test /dev/null != "$ac_site_file" && test -r "$ac_site_file"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: loading site script $ac_site_file" >&5 -$as_echo "$as_me: loading site script $ac_site_file" >&6;} - sed 's/^/| /' "$ac_site_file" >&5 - . "$ac_site_file" \ - || { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error $? "failed to load site script $ac_site_file -See \`config.log' for more details" "$LINENO" 5; } - fi -done - -if test -r "$cache_file"; then - # Some versions of bash will fail to source /dev/null (special files - # actually), so we avoid doing that. DJGPP emulates it as a regular file. - if test /dev/null != "$cache_file" && test -f "$cache_file"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: loading cache $cache_file" >&5 -$as_echo "$as_me: loading cache $cache_file" >&6;} - case $cache_file in - [\\/]* | ?:[\\/]* ) . "$cache_file";; - *) . "./$cache_file";; - esac - fi -else - { $as_echo "$as_me:${as_lineno-$LINENO}: creating cache $cache_file" >&5 -$as_echo "$as_me: creating cache $cache_file" >&6;} - >$cache_file -fi - -# Check that the precious variables saved in the cache have kept the same -# value. -ac_cache_corrupted=false -for ac_var in $ac_precious_vars; do - eval ac_old_set=\$ac_cv_env_${ac_var}_set - eval ac_new_set=\$ac_env_${ac_var}_set - eval ac_old_val=\$ac_cv_env_${ac_var}_value - eval ac_new_val=\$ac_env_${ac_var}_value - case $ac_old_set,$ac_new_set in - set,) - { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5 -$as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;} - ac_cache_corrupted=: ;; - ,set) - { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was not set in the previous run" >&5 -$as_echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;} - ac_cache_corrupted=: ;; - ,);; - *) - if test "x$ac_old_val" != "x$ac_new_val"; then - # differences in whitespace do not lead to failure. - ac_old_val_w=`echo x $ac_old_val` - ac_new_val_w=`echo x $ac_new_val` - if test "$ac_old_val_w" != "$ac_new_val_w"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' has changed since the previous run:" >&5 -$as_echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;} - ac_cache_corrupted=: - else - { $as_echo "$as_me:${as_lineno-$LINENO}: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5 -$as_echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;} - eval $ac_var=\$ac_old_val - fi - { $as_echo "$as_me:${as_lineno-$LINENO}: former value: \`$ac_old_val'" >&5 -$as_echo "$as_me: former value: \`$ac_old_val'" >&2;} - { $as_echo "$as_me:${as_lineno-$LINENO}: current value: \`$ac_new_val'" >&5 -$as_echo "$as_me: current value: \`$ac_new_val'" >&2;} - fi;; - esac - # Pass precious variables to config.status. - if test "$ac_new_set" = set; then - case $ac_new_val in - *\'*) ac_arg=$ac_var=`$as_echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;; - *) ac_arg=$ac_var=$ac_new_val ;; - esac - case " $ac_configure_args " in - *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy. - *) as_fn_append ac_configure_args " '$ac_arg'" ;; - esac - fi -done -if $ac_cache_corrupted; then - { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} - { $as_echo "$as_me:${as_lineno-$LINENO}: error: changes in the environment can compromise the build" >&5 -$as_echo "$as_me: error: changes in the environment can compromise the build" >&2;} - as_fn_error $? "run \`make distclean' and/or \`rm $cache_file' and start over" "$LINENO" 5 -fi -## -------------------- ## -## Main body of script. ## -## -------------------- ## - -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - - -am__api_version='1.11' - -ac_aux_dir= -for ac_dir in "$srcdir" "$srcdir/.." "$srcdir/../.."; do - if test -f "$ac_dir/install-sh"; then - ac_aux_dir=$ac_dir - ac_install_sh="$ac_aux_dir/install-sh -c" - break - elif test -f "$ac_dir/install.sh"; then - ac_aux_dir=$ac_dir - ac_install_sh="$ac_aux_dir/install.sh -c" - break - elif test -f "$ac_dir/shtool"; then - ac_aux_dir=$ac_dir - ac_install_sh="$ac_aux_dir/shtool install -c" - break - fi -done -if test -z "$ac_aux_dir"; then - as_fn_error $? "cannot find install-sh, install.sh, or shtool in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" "$LINENO" 5 -fi - -# These three variables are undocumented and unsupported, -# and are intended to be withdrawn in a future Autoconf release. -# They can cause serious problems if a builder's source tree is in a directory -# whose full name contains unusual characters. -ac_config_guess="$SHELL $ac_aux_dir/config.guess" # Please don't use this var. -ac_config_sub="$SHELL $ac_aux_dir/config.sub" # Please don't use this var. -ac_configure="$SHELL $ac_aux_dir/configure" # Please don't use this var. - - -# Find a good install program. We prefer a C program (faster), -# so one script is as good as another. But avoid the broken or -# incompatible versions: -# SysV /etc/install, /usr/sbin/install -# SunOS /usr/etc/install -# IRIX /sbin/install -# AIX /bin/install -# AmigaOS /C/install, which installs bootblocks on floppy discs -# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag -# AFS /usr/afsws/bin/install, which mishandles nonexistent args -# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" -# OS/2's system install, which has a completely different semantic -# ./install, which can be erroneously created by make from ./install.sh. -# Reject install programs that cannot install multiple files. -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a BSD-compatible install" >&5 -$as_echo_n "checking for a BSD-compatible install... " >&6; } -if test -z "$INSTALL"; then -if ${ac_cv_path_install+:} false; then : - $as_echo_n "(cached) " >&6 -else - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - # Account for people who put trailing slashes in PATH elements. -case $as_dir/ in @%:@(( - ./ | .// | /[cC]/* | \ - /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \ - ?:[\\/]os2[\\/]install[\\/]* | ?:[\\/]OS2[\\/]INSTALL[\\/]* | \ - /usr/ucb/* ) ;; - *) - # OSF1 and SCO ODT 3.0 have their own names for install. - # Don't use installbsd from OSF since it installs stuff as root - # by default. - for ac_prog in ginstall scoinst install; do - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; }; then - if test $ac_prog = install && - grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then - # AIX install. It has an incompatible calling convention. - : - elif test $ac_prog = install && - grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then - # program-specific install script used by HP pwplus--don't use. - : - else - rm -rf conftest.one conftest.two conftest.dir - echo one > conftest.one - echo two > conftest.two - mkdir conftest.dir - if "$as_dir/$ac_prog$ac_exec_ext" -c conftest.one conftest.two "`pwd`/conftest.dir" && - test -s conftest.one && test -s conftest.two && - test -s conftest.dir/conftest.one && - test -s conftest.dir/conftest.two - then - ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c" - break 3 - fi - fi - fi - done - done - ;; -esac - - done -IFS=$as_save_IFS - -rm -rf conftest.one conftest.two conftest.dir - -fi - if test "${ac_cv_path_install+set}" = set; then - INSTALL=$ac_cv_path_install - else - # As a last resort, use the slow shell script. Don't cache a - # value for INSTALL within a source directory, because that will - # break other packages using the cache if that directory is - # removed, or if the value is a relative name. - INSTALL=$ac_install_sh - fi -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $INSTALL" >&5 -$as_echo "$INSTALL" >&6; } - -# Use test -z because SunOS4 sh mishandles braces in ${var-val}. -# It thinks the first close brace ends the variable substitution. -test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' - -test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}' - -test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether build environment is sane" >&5 -$as_echo_n "checking whether build environment is sane... " >&6; } -# Just in case -sleep 1 -echo timestamp > conftest.file -# Reject unsafe characters in $srcdir or the absolute working directory -# name. Accept space and tab only in the latter. -am_lf=' -' -case `pwd` in - *[\\\"\#\$\&\'\`$am_lf]*) - as_fn_error $? "unsafe absolute working directory name" "$LINENO" 5;; -esac -case $srcdir in - *[\\\"\#\$\&\'\`$am_lf\ \ ]*) - as_fn_error $? "unsafe srcdir value: \`$srcdir'" "$LINENO" 5;; -esac - -# Do `set' in a subshell so we don't clobber the current shell's -# arguments. Must try -L first in case configure is actually a -# symlink; some systems play weird games with the mod time of symlinks -# (eg FreeBSD returns the mod time of the symlink's containing -# directory). -if ( - set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null` - if test "$*" = "X"; then - # -L didn't work. - set X `ls -t "$srcdir/configure" conftest.file` - fi - rm -f conftest.file - if test "$*" != "X $srcdir/configure conftest.file" \ - && test "$*" != "X conftest.file $srcdir/configure"; then - - # If neither matched, then we have a broken ls. This can happen - # if, for instance, CONFIG_SHELL is bash and it inherits a - # broken ls alias from the environment. This has actually - # happened. Such a system could not be considered "sane". - as_fn_error $? "ls -t appears to fail. Make sure there is not a broken -alias in your environment" "$LINENO" 5 - fi - - test "$2" = conftest.file - ) -then - # Ok. - : -else - as_fn_error $? "newly created file is older than distributed files! -Check your system clock" "$LINENO" 5 -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -$as_echo "yes" >&6; } -test "$program_prefix" != NONE && - program_transform_name="s&^&$program_prefix&;$program_transform_name" -# Use a double $ so make ignores it. -test "$program_suffix" != NONE && - program_transform_name="s&\$&$program_suffix&;$program_transform_name" -# Double any \ or $. -# By default was `s,x,x', remove it if useless. -ac_script='s/[\\$]/&&/g;s/;s,x,x,$//' -program_transform_name=`$as_echo "$program_transform_name" | sed "$ac_script"` - -# expand $ac_aux_dir to an absolute path -am_aux_dir=`cd $ac_aux_dir && pwd` - -if test x"${MISSING+set}" != xset; then - case $am_aux_dir in - *\ * | *\ *) - MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;; - *) - MISSING="\${SHELL} $am_aux_dir/missing" ;; - esac -fi -# Use eval to expand $SHELL -if eval "$MISSING --run true"; then - am_missing_run="$MISSING --run " -else - am_missing_run= - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`missing' script is too old or missing" >&5 -$as_echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;} -fi - -if test x"${install_sh}" != xset; then - case $am_aux_dir in - *\ * | *\ *) - install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;; - *) - install_sh="\${SHELL} $am_aux_dir/install-sh" - esac -fi - -# Installed binaries are usually stripped using `strip' when the user -# run `make install-strip'. However `strip' might not be the right -# tool to use in cross-compilation environments, therefore Automake -# will honor the `STRIP' environment variable to overrule this program. -if test "$cross_compiling" != no; then - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. -set dummy ${ac_tool_prefix}strip; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_STRIP+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$STRIP"; then - ac_cv_prog_STRIP="$STRIP" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_STRIP="${ac_tool_prefix}strip" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -STRIP=$ac_cv_prog_STRIP -if test -n "$STRIP"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5 -$as_echo "$STRIP" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -fi -if test -z "$ac_cv_prog_STRIP"; then - ac_ct_STRIP=$STRIP - # Extract the first word of "strip", so it can be a program name with args. -set dummy strip; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_STRIP+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_STRIP"; then - ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_STRIP="strip" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP -if test -n "$ac_ct_STRIP"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5 -$as_echo "$ac_ct_STRIP" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - if test "x$ac_ct_STRIP" = x; then - STRIP=":" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - STRIP=$ac_ct_STRIP - fi -else - STRIP="$ac_cv_prog_STRIP" -fi - -fi -INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s" - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a thread-safe mkdir -p" >&5 -$as_echo_n "checking for a thread-safe mkdir -p... " >&6; } -if test -z "$MKDIR_P"; then - if ${ac_cv_path_mkdir+:} false; then : - $as_echo_n "(cached) " >&6 -else - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH$PATH_SEPARATOR/opt/sfw/bin -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_prog in mkdir gmkdir; do - for ac_exec_ext in '' $ac_executable_extensions; do - { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; } || continue - case `"$as_dir/$ac_prog$ac_exec_ext" --version 2>&1` in #( - 'mkdir (GNU coreutils) '* | \ - 'mkdir (coreutils) '* | \ - 'mkdir (fileutils) '4.1*) - ac_cv_path_mkdir=$as_dir/$ac_prog$ac_exec_ext - break 3;; - esac - done - done - done -IFS=$as_save_IFS - -fi - - test -d ./--version && rmdir ./--version - if test "${ac_cv_path_mkdir+set}" = set; then - MKDIR_P="$ac_cv_path_mkdir -p" - else - # As a last resort, use the slow shell script. Don't cache a - # value for MKDIR_P within a source directory, because that will - # break other packages using the cache if that directory is - # removed, or if the value is a relative name. - MKDIR_P="$ac_install_sh -d" - fi -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $MKDIR_P" >&5 -$as_echo "$MKDIR_P" >&6; } - -mkdir_p="$MKDIR_P" -case $mkdir_p in - [\\/$]* | ?:[\\/]*) ;; - */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;; -esac - -for ac_prog in gawk mawk nawk awk -do - # Extract the first word of "$ac_prog", so it can be a program name with args. -set dummy $ac_prog; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_AWK+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$AWK"; then - ac_cv_prog_AWK="$AWK" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_AWK="$ac_prog" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -AWK=$ac_cv_prog_AWK -if test -n "$AWK"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AWK" >&5 -$as_echo "$AWK" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - test -n "$AWK" && break -done - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ${MAKE-make} sets \$(MAKE)" >&5 -$as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; } -set x ${MAKE-make} -ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'` -if eval \${ac_cv_prog_make_${ac_make}_set+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat >conftest.make <<\_ACEOF -SHELL = /bin/sh -all: - @echo '@@@%%%=$(MAKE)=@@@%%%' -_ACEOF -# GNU make sometimes prints "make[1]: Entering ...", which would confuse us. -case `${MAKE-make} -f conftest.make 2>/dev/null` in - *@@@%%%=?*=@@@%%%*) - eval ac_cv_prog_make_${ac_make}_set=yes;; - *) - eval ac_cv_prog_make_${ac_make}_set=no;; -esac -rm -f conftest.make -fi -if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -$as_echo "yes" >&6; } - SET_MAKE= -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } - SET_MAKE="MAKE=${MAKE-make}" -fi - -rm -rf .tst 2>/dev/null -mkdir .tst 2>/dev/null -if test -d .tst; then - am__leading_dot=. -else - am__leading_dot=_ -fi -rmdir .tst 2>/dev/null - -if test "`cd $srcdir && pwd`" != "`pwd`"; then - # Use -I$(srcdir) only when $(srcdir) != ., so that make's output - # is not polluted with repeated "-I." - am__isrc=' -I$(srcdir)' - # test to see if srcdir already configured - if test -f $srcdir/config.status; then - as_fn_error $? "source directory already configured; run \"make distclean\" there first" "$LINENO" 5 - fi -fi - -# test whether we have cygpath -if test -z "$CYGPATH_W"; then - if (cygpath --version) >/dev/null 2>/dev/null; then - CYGPATH_W='cygpath -w' - else - CYGPATH_W=echo - fi -fi - - -# Define the identity of the package. - PACKAGE=shairport - VERSION=1.2.0 - - -cat >>confdefs.h <<_ACEOF -@%:@define PACKAGE "$PACKAGE" -_ACEOF - - -cat >>confdefs.h <<_ACEOF -@%:@define VERSION "$VERSION" -_ACEOF - -# Some tools Automake needs. - -ACLOCAL=${ACLOCAL-"${am_missing_run}aclocal-${am__api_version}"} - - -AUTOCONF=${AUTOCONF-"${am_missing_run}autoconf"} - - -AUTOMAKE=${AUTOMAKE-"${am_missing_run}automake-${am__api_version}"} - - -AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"} - - -MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"} - -# We need awk for the "check" target. The system "awk" is bad on -# some platforms. -# Always define AMTAR for backward compatibility. - -AMTAR=${AMTAR-"${am_missing_run}tar"} - -am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -' - - - - - -ac_config_headers="$ac_config_headers config.h" - -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu -if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args. -set dummy ${ac_tool_prefix}gcc; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_CC+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_CC="${ac_tool_prefix}gcc" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -CC=$ac_cv_prog_CC -if test -n "$CC"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 -$as_echo "$CC" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -fi -if test -z "$ac_cv_prog_CC"; then - ac_ct_CC=$CC - # Extract the first word of "gcc", so it can be a program name with args. -set dummy gcc; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_CC+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_CC"; then - ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_CC="gcc" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_CC=$ac_cv_prog_ac_ct_CC -if test -n "$ac_ct_CC"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 -$as_echo "$ac_ct_CC" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - if test "x$ac_ct_CC" = x; then - CC="" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - CC=$ac_ct_CC - fi -else - CC="$ac_cv_prog_CC" -fi - -if test -z "$CC"; then - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. -set dummy ${ac_tool_prefix}cc; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_CC+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_CC="${ac_tool_prefix}cc" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -CC=$ac_cv_prog_CC -if test -n "$CC"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 -$as_echo "$CC" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - fi -fi -if test -z "$CC"; then - # Extract the first word of "cc", so it can be a program name with args. -set dummy cc; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_CC+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else - ac_prog_rejected=no -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then - ac_prog_rejected=yes - continue - fi - ac_cv_prog_CC="cc" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -if test $ac_prog_rejected = yes; then - # We found a bogon in the path, so make sure we never use it. - set dummy $ac_cv_prog_CC - shift - if test $@%:@ != 0; then - # We chose a different compiler from the bogus one. - # However, it has the same basename, so the bogon will be chosen - # first if we set CC to just the basename; use the full file name. - shift - ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@" - fi -fi -fi -fi -CC=$ac_cv_prog_CC -if test -n "$CC"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 -$as_echo "$CC" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -fi -if test -z "$CC"; then - if test -n "$ac_tool_prefix"; then - for ac_prog in cl.exe - do - # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. -set dummy $ac_tool_prefix$ac_prog; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_CC+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_CC="$ac_tool_prefix$ac_prog" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -CC=$ac_cv_prog_CC -if test -n "$CC"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5 -$as_echo "$CC" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - test -n "$CC" && break - done -fi -if test -z "$CC"; then - ac_ct_CC=$CC - for ac_prog in cl.exe -do - # Extract the first word of "$ac_prog", so it can be a program name with args. -set dummy $ac_prog; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_CC+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_CC"; then - ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_CC="$ac_prog" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_CC=$ac_cv_prog_ac_ct_CC -if test -n "$ac_ct_CC"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5 -$as_echo "$ac_ct_CC" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - test -n "$ac_ct_CC" && break -done - - if test "x$ac_ct_CC" = x; then - CC="" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - CC=$ac_ct_CC - fi -fi - -fi - - -test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error $? "no acceptable C compiler found in \$PATH -See \`config.log' for more details" "$LINENO" 5; } - -# Provide some information about the compiler. -$as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5 -set X $ac_compile -ac_compiler=$2 -for ac_option in --version -v -V -qversion; do - { { ac_try="$ac_compiler $ac_option >&5" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_compiler $ac_option >&5") 2>conftest.err - ac_status=$? - if test -s conftest.err; then - sed '10a\ -... rest of stderr output deleted ... - 10q' conftest.err >conftest.er1 - cat conftest.er1 >&5 - fi - rm -f conftest.er1 conftest.err - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } -done - -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -ac_clean_files_save=$ac_clean_files -ac_clean_files="$ac_clean_files a.out a.out.dSYM a.exe b.out" -# Try to create an executable without -o first, disregard a.out. -# It will help us diagnose broken compilers, and finding out an intuition -# of exeext. -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler works" >&5 -$as_echo_n "checking whether the C compiler works... " >&6; } -ac_link_default=`$as_echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'` - -# The possible output files: -ac_files="a.out conftest.exe conftest a.exe a_out.exe b.out conftest.*" - -ac_rmfiles= -for ac_file in $ac_files -do - case $ac_file in - *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; - * ) ac_rmfiles="$ac_rmfiles $ac_file";; - esac -done -rm -f $ac_rmfiles - -if { { ac_try="$ac_link_default" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_link_default") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then : - # Autoconf-2.13 could set the ac_cv_exeext variable to `no'. -# So ignore a value of `no', otherwise this would lead to `EXEEXT = no' -# in a Makefile. We should not override ac_cv_exeext if it was cached, -# so that the user can short-circuit this test for compilers unknown to -# Autoconf. -for ac_file in $ac_files '' -do - test -f "$ac_file" || continue - case $ac_file in - *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) - ;; - [ab].out ) - # We found the default executable, but exeext='' is most - # certainly right. - break;; - *.* ) - if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no; - then :; else - ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` - fi - # We set ac_cv_exeext here because the later test for it is not - # safe: cross compilers may not add the suffix if given an `-o' - # argument, so we may need to know it at that point already. - # Even if this section looks crufty: it has the advantage of - # actually working. - break;; - * ) - break;; - esac -done -test "$ac_cv_exeext" = no && ac_cv_exeext= - -else - ac_file='' -fi -if test -z "$ac_file"; then : - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -$as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error 77 "C compiler cannot create executables -See \`config.log' for more details" "$LINENO" 5; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -$as_echo "yes" >&6; } -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler default output file name" >&5 -$as_echo_n "checking for C compiler default output file name... " >&6; } -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_file" >&5 -$as_echo "$ac_file" >&6; } -ac_exeext=$ac_cv_exeext - -rm -f -r a.out a.out.dSYM a.exe conftest$ac_cv_exeext b.out -ac_clean_files=$ac_clean_files_save -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of executables" >&5 -$as_echo_n "checking for suffix of executables... " >&6; } -if { { ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_link") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then : - # If both `conftest.exe' and `conftest' are `present' (well, observable) -# catch `conftest.exe'. For instance with Cygwin, `ls conftest' will -# work properly (i.e., refer to `conftest.exe'), while it won't with -# `rm'. -for ac_file in conftest.exe conftest conftest.*; do - test -f "$ac_file" || continue - case $ac_file in - *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; - *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` - break;; - * ) break;; - esac -done -else - { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error $? "cannot compute suffix of executables: cannot compile and link -See \`config.log' for more details" "$LINENO" 5; } -fi -rm -f conftest conftest$ac_cv_exeext -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_exeext" >&5 -$as_echo "$ac_cv_exeext" >&6; } - -rm -f conftest.$ac_ext -EXEEXT=$ac_cv_exeext -ac_exeext=$EXEEXT -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -@%:@include -int -main () -{ -FILE *f = fopen ("conftest.out", "w"); - return ferror (f) || fclose (f) != 0; - - ; - return 0; -} -_ACEOF -ac_clean_files="$ac_clean_files conftest.out" -# Check that the compiler produces executables we can run. If not, either -# the compiler is broken, or we cross compile. -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are cross compiling" >&5 -$as_echo_n "checking whether we are cross compiling... " >&6; } -if test "$cross_compiling" != yes; then - { { ac_try="$ac_link" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_link") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } - if { ac_try='./conftest$ac_cv_exeext' - { { case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_try") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; }; then - cross_compiling=no - else - if test "$cross_compiling" = maybe; then - cross_compiling=yes - else - { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error $? "cannot run C compiled programs. -If you meant to cross compile, use \`--host'. -See \`config.log' for more details" "$LINENO" 5; } - fi - fi -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $cross_compiling" >&5 -$as_echo "$cross_compiling" >&6; } - -rm -f conftest.$ac_ext conftest$ac_cv_exeext conftest.out -ac_clean_files=$ac_clean_files_save -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of object files" >&5 -$as_echo_n "checking for suffix of object files... " >&6; } -if ${ac_cv_objext+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -rm -f conftest.o conftest.obj -if { { ac_try="$ac_compile" -case "(($ac_try" in - *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; - *) ac_try_echo=$ac_try;; -esac -eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\"" -$as_echo "$ac_try_echo"; } >&5 - (eval "$ac_compile") 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then : - for ac_file in conftest.o conftest.obj conftest.*; do - test -f "$ac_file" || continue; - case $ac_file in - *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM ) ;; - *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'` - break;; - esac -done -else - $as_echo "$as_me: failed program was:" >&5 -sed 's/^/| /' conftest.$ac_ext >&5 - -{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error $? "cannot compute suffix of object files: cannot compile -See \`config.log' for more details" "$LINENO" 5; } -fi -rm -f conftest.$ac_cv_objext conftest.$ac_ext -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_objext" >&5 -$as_echo "$ac_cv_objext" >&6; } -OBJEXT=$ac_cv_objext -ac_objext=$OBJEXT -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C compiler" >&5 -$as_echo_n "checking whether we are using the GNU C compiler... " >&6; } -if ${ac_cv_c_compiler_gnu+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ -#ifndef __GNUC__ - choke me -#endif - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - ac_compiler_gnu=yes -else - ac_compiler_gnu=no -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -ac_cv_c_compiler_gnu=$ac_compiler_gnu - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_compiler_gnu" >&5 -$as_echo "$ac_cv_c_compiler_gnu" >&6; } -if test $ac_compiler_gnu = yes; then - GCC=yes -else - GCC= -fi -ac_test_CFLAGS=${CFLAGS+set} -ac_save_CFLAGS=$CFLAGS -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5 -$as_echo_n "checking whether $CC accepts -g... " >&6; } -if ${ac_cv_prog_cc_g+:} false; then : - $as_echo_n "(cached) " >&6 -else - ac_save_c_werror_flag=$ac_c_werror_flag - ac_c_werror_flag=yes - ac_cv_prog_cc_g=no - CFLAGS="-g" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - ac_cv_prog_cc_g=yes -else - CFLAGS="" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - -else - ac_c_werror_flag=$ac_save_c_werror_flag - CFLAGS="-g" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - ac_cv_prog_cc_g=yes -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - ac_c_werror_flag=$ac_save_c_werror_flag -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_g" >&5 -$as_echo "$ac_cv_prog_cc_g" >&6; } -if test "$ac_test_CFLAGS" = set; then - CFLAGS=$ac_save_CFLAGS -elif test $ac_cv_prog_cc_g = yes; then - if test "$GCC" = yes; then - CFLAGS="-g -O2" - else - CFLAGS="-g" - fi -else - if test "$GCC" = yes; then - CFLAGS="-O2" - else - CFLAGS= - fi -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5 -$as_echo_n "checking for $CC option to accept ISO C89... " >&6; } -if ${ac_cv_prog_cc_c89+:} false; then : - $as_echo_n "(cached) " >&6 -else - ac_cv_prog_cc_c89=no -ac_save_CC=$CC -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include -#include -#include -#include -/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */ -struct buf { int x; }; -FILE * (*rcsopen) (struct buf *, struct stat *, int); -static char *e (p, i) - char **p; - int i; -{ - return p[i]; -} -static char *f (char * (*g) (char **, int), char **p, ...) -{ - char *s; - va_list v; - va_start (v,p); - s = g (p, va_arg (v,int)); - va_end (v); - return s; -} - -/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has - function prototypes and stuff, but not '\xHH' hex character constants. - These don't provoke an error unfortunately, instead are silently treated - as 'x'. The following induces an error, until -std is added to get - proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an - array size at least. It's necessary to write '\x00'==0 to get something - that's true only with -std. */ -int osf4_cc_array ['\x00' == 0 ? 1 : -1]; - -/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters - inside strings and character constants. */ -#define FOO(x) 'x' -int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1]; - -int test (int i, double x); -struct s1 {int (*f) (int a);}; -struct s2 {int (*f) (double a);}; -int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int); -int argc; -char **argv; -int -main () -{ -return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1]; - ; - return 0; -} -_ACEOF -for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \ - -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" -do - CC="$ac_save_CC $ac_arg" - if ac_fn_c_try_compile "$LINENO"; then : - ac_cv_prog_cc_c89=$ac_arg -fi -rm -f core conftest.err conftest.$ac_objext - test "x$ac_cv_prog_cc_c89" != "xno" && break -done -rm -f conftest.$ac_ext -CC=$ac_save_CC - -fi -# AC_CACHE_VAL -case "x$ac_cv_prog_cc_c89" in - x) - { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5 -$as_echo "none needed" >&6; } ;; - xno) - { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5 -$as_echo "unsupported" >&6; } ;; - *) - CC="$CC $ac_cv_prog_cc_c89" - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5 -$as_echo "$ac_cv_prog_cc_c89" >&6; } ;; -esac -if test "x$ac_cv_prog_cc_c89" != xno; then : - -fi - -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu -DEPDIR="${am__leading_dot}deps" - -ac_config_commands="$ac_config_commands depfiles" - - -am_make=${MAKE-make} -cat > confinc << 'END' -am__doit: - @echo this is the am__doit target -.PHONY: am__doit -END -# If we don't find an include directive, just comment out the code. -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for style of include used by $am_make" >&5 -$as_echo_n "checking for style of include used by $am_make... " >&6; } -am__include="#" -am__quote= -_am_result=none -# First try GNU make style include. -echo "include confinc" > confmf -# Ignore all kinds of additional output from `make'. -case `$am_make -s -f confmf 2> /dev/null` in #( -*the\ am__doit\ target*) - am__include=include - am__quote= - _am_result=GNU - ;; -esac -# Now try BSD make style include. -if test "$am__include" = "#"; then - echo '.include "confinc"' > confmf - case `$am_make -s -f confmf 2> /dev/null` in #( - *the\ am__doit\ target*) - am__include=.include - am__quote="\"" - _am_result=BSD - ;; - esac -fi - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $_am_result" >&5 -$as_echo "$_am_result" >&6; } -rm -f confinc confmf - -@%:@ Check whether --enable-dependency-tracking was given. -if test "${enable_dependency_tracking+set}" = set; then : - enableval=$enable_dependency_tracking; -fi - -if test "x$enable_dependency_tracking" != xno; then - am_depcomp="$ac_aux_dir/depcomp" - AMDEPBACKSLASH='\' -fi - if test "x$enable_dependency_tracking" != xno; then - AMDEP_TRUE= - AMDEP_FALSE='#' -else - AMDEP_TRUE='#' - AMDEP_FALSE= -fi - - - -depcc="$CC" am_compiler_list= - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5 -$as_echo_n "checking dependency style of $depcc... " >&6; } -if ${am_cv_CC_dependencies_compiler_type+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then - # We make a subdir and do the tests there. Otherwise we can end up - # making bogus files that we don't know about and never remove. For - # instance it was reported that on HP-UX the gcc test will end up - # making a dummy file named `D' -- because `-MD' means `put the output - # in D'. - mkdir conftest.dir - # Copy depcomp to subdir because otherwise we won't find it if we're - # using a relative directory. - cp "$am_depcomp" conftest.dir - cd conftest.dir - # We will build objects and dependencies in a subdirectory because - # it helps to detect inapplicable dependency modes. For instance - # both Tru64's cc and ICC support -MD to output dependencies as a - # side effect of compilation, but ICC will put the dependencies in - # the current directory while Tru64 will put them in the object - # directory. - mkdir sub - - am_cv_CC_dependencies_compiler_type=none - if test "$am_compiler_list" = ""; then - am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp` - fi - am__universal=false - case " $depcc " in #( - *\ -arch\ *\ -arch\ *) am__universal=true ;; - esac - - for depmode in $am_compiler_list; do - # Setup a source with many dependencies, because some compilers - # like to wrap large dependency lists on column 80 (with \), and - # we should not choose a depcomp mode which is confused by this. - # - # We need to recreate these files for each test, as the compiler may - # overwrite some of them when testing with obscure command lines. - # This happens at least with the AIX C compiler. - : > sub/conftest.c - for i in 1 2 3 4 5 6; do - echo '#include "conftst'$i'.h"' >> sub/conftest.c - # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with - # Solaris 8's {/usr,}/bin/sh. - touch sub/conftst$i.h - done - echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf - - # We check with `-c' and `-o' for the sake of the "dashmstdout" - # mode. It turns out that the SunPro C++ compiler does not properly - # handle `-M -o', and we need to detect this. Also, some Intel - # versions had trouble with output in subdirs - am__obj=sub/conftest.${OBJEXT-o} - am__minus_obj="-o $am__obj" - case $depmode in - gcc) - # This depmode causes a compiler race in universal mode. - test "$am__universal" = false || continue - ;; - nosideeffect) - # after this tag, mechanisms are not by side-effect, so they'll - # only be used when explicitly requested - if test "x$enable_dependency_tracking" = xyes; then - continue - else - break - fi - ;; - msvisualcpp | msvcmsys) - # This compiler won't grok `-c -o', but also, the minuso test has - # not run yet. These depmodes are late enough in the game, and - # so weak that their functioning should not be impacted. - am__obj=conftest.${OBJEXT-o} - am__minus_obj= - ;; - none) break ;; - esac - if depmode=$depmode \ - source=sub/conftest.c object=$am__obj \ - depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ - $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \ - >/dev/null 2>conftest.err && - grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && - grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && - grep $am__obj sub/conftest.Po > /dev/null 2>&1 && - ${MAKE-make} -s -f confmf > /dev/null 2>&1; then - # icc doesn't choke on unknown options, it will just issue warnings - # or remarks (even with -Werror). So we grep stderr for any message - # that says an option was ignored or not supported. - # When given -MP, icc 7.0 and 7.1 complain thusly: - # icc: Command line warning: ignoring option '-M'; no argument required - # The diagnosis changed in icc 8.0: - # icc: Command line remark: option '-MP' not supported - if (grep 'ignoring option' conftest.err || - grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else - am_cv_CC_dependencies_compiler_type=$depmode - break - fi - fi - done - - cd .. - rm -rf conftest.dir -else - am_cv_CC_dependencies_compiler_type=none -fi - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_CC_dependencies_compiler_type" >&5 -$as_echo "$am_cv_CC_dependencies_compiler_type" >&6; } -CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type - - if - test "x$enable_dependency_tracking" != xno \ - && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then - am__fastdepCC_TRUE= - am__fastdepCC_FALSE='#' -else - am__fastdepCC_TRUE='#' - am__fastdepCC_FALSE= -fi - - - -@%:@ Check whether --enable-static was given. -if test "${enable_static+set}" = set; then : - enableval=$enable_static; p=${PACKAGE-default} - case $enableval in - yes) enable_static=yes ;; - no) enable_static=no ;; - *) - enable_static=no - # Look at the argument we got. We use all the common list separators. - lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," - for pkg in $enableval; do - IFS="$lt_save_ifs" - if test "X$pkg" = "X$p"; then - enable_static=yes - fi - done - IFS="$lt_save_ifs" - ;; - esac -else - enable_static=no -fi - - - - - - - - - -case `pwd` in - *\ * | *\ *) - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&5 -$as_echo "$as_me: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&2;} ;; -esac - - - -macro_version='2.4' -macro_revision='1.3293' - - - - - - - - - - - - - -ltmain="$ac_aux_dir/ltmain.sh" - -# Make sure we can run config.sub. -$SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 || - as_fn_error $? "cannot run $SHELL $ac_aux_dir/config.sub" "$LINENO" 5 - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking build system type" >&5 -$as_echo_n "checking build system type... " >&6; } -if ${ac_cv_build+:} false; then : - $as_echo_n "(cached) " >&6 -else - ac_build_alias=$build_alias -test "x$ac_build_alias" = x && - ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"` -test "x$ac_build_alias" = x && - as_fn_error $? "cannot guess build type; you must specify one" "$LINENO" 5 -ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` || - as_fn_error $? "$SHELL $ac_aux_dir/config.sub $ac_build_alias failed" "$LINENO" 5 - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_build" >&5 -$as_echo "$ac_cv_build" >&6; } -case $ac_cv_build in -*-*-*) ;; -*) as_fn_error $? "invalid value of canonical build" "$LINENO" 5;; -esac -build=$ac_cv_build -ac_save_IFS=$IFS; IFS='-' -set x $ac_cv_build -shift -build_cpu=$1 -build_vendor=$2 -shift; shift -# Remember, the first character of IFS is used to create $*, -# except with old shells: -build_os=$* -IFS=$ac_save_IFS -case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking host system type" >&5 -$as_echo_n "checking host system type... " >&6; } -if ${ac_cv_host+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test "x$host_alias" = x; then - ac_cv_host=$ac_cv_build -else - ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` || - as_fn_error $? "$SHELL $ac_aux_dir/config.sub $host_alias failed" "$LINENO" 5 -fi - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_host" >&5 -$as_echo "$ac_cv_host" >&6; } -case $ac_cv_host in -*-*-*) ;; -*) as_fn_error $? "invalid value of canonical host" "$LINENO" 5;; -esac -host=$ac_cv_host -ac_save_IFS=$IFS; IFS='-' -set x $ac_cv_host -shift -host_cpu=$1 -host_vendor=$2 -shift; shift -# Remember, the first character of IFS is used to create $*, -# except with old shells: -host_os=$* -IFS=$ac_save_IFS -case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac - - -# Backslashify metacharacters that are still active within -# double-quoted strings. -sed_quote_subst='s/\(["`$\\]\)/\\\1/g' - -# Same as above, but do not quote variable references. -double_quote_subst='s/\(["`\\]\)/\\\1/g' - -# Sed substitution to delay expansion of an escaped shell variable in a -# double_quote_subst'ed string. -delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g' - -# Sed substitution to delay expansion of an escaped single quote. -delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g' - -# Sed substitution to avoid accidental globbing in evaled expressions -no_glob_subst='s/\*/\\\*/g' - -ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' -ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO -ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to print strings" >&5 -$as_echo_n "checking how to print strings... " >&6; } -# Test print first, because it will be a builtin if present. -if test "X`( print -r -- -n ) 2>/dev/null`" = X-n && \ - test "X`print -r -- $ECHO 2>/dev/null`" = "X$ECHO"; then - ECHO='print -r --' -elif test "X`printf %s $ECHO 2>/dev/null`" = "X$ECHO"; then - ECHO='printf %s\n' -else - # Use this function as a fallback that always works. - func_fallback_echo () - { - eval 'cat <<_LTECHO_EOF -$1 -_LTECHO_EOF' - } - ECHO='func_fallback_echo' -fi - -# func_echo_all arg... -# Invoke $ECHO with all args, space-separated. -func_echo_all () -{ - $ECHO "" -} - -case "$ECHO" in - printf*) { $as_echo "$as_me:${as_lineno-$LINENO}: result: printf" >&5 -$as_echo "printf" >&6; } ;; - print*) { $as_echo "$as_me:${as_lineno-$LINENO}: result: print -r" >&5 -$as_echo "print -r" >&6; } ;; - *) { $as_echo "$as_me:${as_lineno-$LINENO}: result: cat" >&5 -$as_echo "cat" >&6; } ;; -esac - - - - - - - - - - - - - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a sed that does not truncate output" >&5 -$as_echo_n "checking for a sed that does not truncate output... " >&6; } -if ${ac_cv_path_SED+:} false; then : - $as_echo_n "(cached) " >&6 -else - ac_script=s/aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa/bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb/ - for ac_i in 1 2 3 4 5 6 7; do - ac_script="$ac_script$as_nl$ac_script" - done - echo "$ac_script" 2>/dev/null | sed 99q >conftest.sed - { ac_script=; unset ac_script;} - if test -z "$SED"; then - ac_path_SED_found=false - # Loop through the user's path and test for each of PROGNAME-LIST - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_prog in sed gsed; do - for ac_exec_ext in '' $ac_executable_extensions; do - ac_path_SED="$as_dir/$ac_prog$ac_exec_ext" - { test -f "$ac_path_SED" && $as_test_x "$ac_path_SED"; } || continue -# Check for GNU ac_path_SED and select it if it is found. - # Check for GNU $ac_path_SED -case `"$ac_path_SED" --version 2>&1` in -*GNU*) - ac_cv_path_SED="$ac_path_SED" ac_path_SED_found=:;; -*) - ac_count=0 - $as_echo_n 0123456789 >"conftest.in" - while : - do - cat "conftest.in" "conftest.in" >"conftest.tmp" - mv "conftest.tmp" "conftest.in" - cp "conftest.in" "conftest.nl" - $as_echo '' >> "conftest.nl" - "$ac_path_SED" -f conftest.sed < "conftest.nl" >"conftest.out" 2>/dev/null || break - diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break - as_fn_arith $ac_count + 1 && ac_count=$as_val - if test $ac_count -gt ${ac_path_SED_max-0}; then - # Best one so far, save it but keep looking for a better one - ac_cv_path_SED="$ac_path_SED" - ac_path_SED_max=$ac_count - fi - # 10*(2^10) chars as input seems more than enough - test $ac_count -gt 10 && break - done - rm -f conftest.in conftest.tmp conftest.nl conftest.out;; -esac - - $ac_path_SED_found && break 3 - done - done - done -IFS=$as_save_IFS - if test -z "$ac_cv_path_SED"; then - as_fn_error $? "no acceptable sed could be found in \$PATH" "$LINENO" 5 - fi -else - ac_cv_path_SED=$SED -fi - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_SED" >&5 -$as_echo "$ac_cv_path_SED" >&6; } - SED="$ac_cv_path_SED" - rm -f conftest.sed - -test -z "$SED" && SED=sed -Xsed="$SED -e 1s/^X//" - - - - - - - - - - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for grep that handles long lines and -e" >&5 -$as_echo_n "checking for grep that handles long lines and -e... " >&6; } -if ${ac_cv_path_GREP+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -z "$GREP"; then - ac_path_GREP_found=false - # Loop through the user's path and test for each of PROGNAME-LIST - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_prog in grep ggrep; do - for ac_exec_ext in '' $ac_executable_extensions; do - ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext" - { test -f "$ac_path_GREP" && $as_test_x "$ac_path_GREP"; } || continue -# Check for GNU ac_path_GREP and select it if it is found. - # Check for GNU $ac_path_GREP -case `"$ac_path_GREP" --version 2>&1` in -*GNU*) - ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;; -*) - ac_count=0 - $as_echo_n 0123456789 >"conftest.in" - while : - do - cat "conftest.in" "conftest.in" >"conftest.tmp" - mv "conftest.tmp" "conftest.in" - cp "conftest.in" "conftest.nl" - $as_echo 'GREP' >> "conftest.nl" - "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break - diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break - as_fn_arith $ac_count + 1 && ac_count=$as_val - if test $ac_count -gt ${ac_path_GREP_max-0}; then - # Best one so far, save it but keep looking for a better one - ac_cv_path_GREP="$ac_path_GREP" - ac_path_GREP_max=$ac_count - fi - # 10*(2^10) chars as input seems more than enough - test $ac_count -gt 10 && break - done - rm -f conftest.in conftest.tmp conftest.nl conftest.out;; -esac - - $ac_path_GREP_found && break 3 - done - done - done -IFS=$as_save_IFS - if test -z "$ac_cv_path_GREP"; then - as_fn_error $? "no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5 - fi -else - ac_cv_path_GREP=$GREP -fi - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_GREP" >&5 -$as_echo "$ac_cv_path_GREP" >&6; } - GREP="$ac_cv_path_GREP" - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for egrep" >&5 -$as_echo_n "checking for egrep... " >&6; } -if ${ac_cv_path_EGREP+:} false; then : - $as_echo_n "(cached) " >&6 -else - if echo a | $GREP -E '(a|b)' >/dev/null 2>&1 - then ac_cv_path_EGREP="$GREP -E" - else - if test -z "$EGREP"; then - ac_path_EGREP_found=false - # Loop through the user's path and test for each of PROGNAME-LIST - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_prog in egrep; do - for ac_exec_ext in '' $ac_executable_extensions; do - ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext" - { test -f "$ac_path_EGREP" && $as_test_x "$ac_path_EGREP"; } || continue -# Check for GNU ac_path_EGREP and select it if it is found. - # Check for GNU $ac_path_EGREP -case `"$ac_path_EGREP" --version 2>&1` in -*GNU*) - ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;; -*) - ac_count=0 - $as_echo_n 0123456789 >"conftest.in" - while : - do - cat "conftest.in" "conftest.in" >"conftest.tmp" - mv "conftest.tmp" "conftest.in" - cp "conftest.in" "conftest.nl" - $as_echo 'EGREP' >> "conftest.nl" - "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break - diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break - as_fn_arith $ac_count + 1 && ac_count=$as_val - if test $ac_count -gt ${ac_path_EGREP_max-0}; then - # Best one so far, save it but keep looking for a better one - ac_cv_path_EGREP="$ac_path_EGREP" - ac_path_EGREP_max=$ac_count - fi - # 10*(2^10) chars as input seems more than enough - test $ac_count -gt 10 && break - done - rm -f conftest.in conftest.tmp conftest.nl conftest.out;; -esac - - $ac_path_EGREP_found && break 3 - done - done - done -IFS=$as_save_IFS - if test -z "$ac_cv_path_EGREP"; then - as_fn_error $? "no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5 - fi -else - ac_cv_path_EGREP=$EGREP -fi - - fi -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_EGREP" >&5 -$as_echo "$ac_cv_path_EGREP" >&6; } - EGREP="$ac_cv_path_EGREP" - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for fgrep" >&5 -$as_echo_n "checking for fgrep... " >&6; } -if ${ac_cv_path_FGREP+:} false; then : - $as_echo_n "(cached) " >&6 -else - if echo 'ab*c' | $GREP -F 'ab*c' >/dev/null 2>&1 - then ac_cv_path_FGREP="$GREP -F" - else - if test -z "$FGREP"; then - ac_path_FGREP_found=false - # Loop through the user's path and test for each of PROGNAME-LIST - as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_prog in fgrep; do - for ac_exec_ext in '' $ac_executable_extensions; do - ac_path_FGREP="$as_dir/$ac_prog$ac_exec_ext" - { test -f "$ac_path_FGREP" && $as_test_x "$ac_path_FGREP"; } || continue -# Check for GNU ac_path_FGREP and select it if it is found. - # Check for GNU $ac_path_FGREP -case `"$ac_path_FGREP" --version 2>&1` in -*GNU*) - ac_cv_path_FGREP="$ac_path_FGREP" ac_path_FGREP_found=:;; -*) - ac_count=0 - $as_echo_n 0123456789 >"conftest.in" - while : - do - cat "conftest.in" "conftest.in" >"conftest.tmp" - mv "conftest.tmp" "conftest.in" - cp "conftest.in" "conftest.nl" - $as_echo 'FGREP' >> "conftest.nl" - "$ac_path_FGREP" FGREP < "conftest.nl" >"conftest.out" 2>/dev/null || break - diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break - as_fn_arith $ac_count + 1 && ac_count=$as_val - if test $ac_count -gt ${ac_path_FGREP_max-0}; then - # Best one so far, save it but keep looking for a better one - ac_cv_path_FGREP="$ac_path_FGREP" - ac_path_FGREP_max=$ac_count - fi - # 10*(2^10) chars as input seems more than enough - test $ac_count -gt 10 && break - done - rm -f conftest.in conftest.tmp conftest.nl conftest.out;; -esac - - $ac_path_FGREP_found && break 3 - done - done - done -IFS=$as_save_IFS - if test -z "$ac_cv_path_FGREP"; then - as_fn_error $? "no acceptable fgrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5 - fi -else - ac_cv_path_FGREP=$FGREP -fi - - fi -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_FGREP" >&5 -$as_echo "$ac_cv_path_FGREP" >&6; } - FGREP="$ac_cv_path_FGREP" - - -test -z "$GREP" && GREP=grep - - - - - - - - - - - - - - - - - - - -@%:@ Check whether --with-gnu-ld was given. -if test "${with_gnu_ld+set}" = set; then : - withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes -else - with_gnu_ld=no -fi - -ac_prog=ld -if test "$GCC" = yes; then - # Check if gcc -print-prog-name=ld gives a path. - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ld used by $CC" >&5 -$as_echo_n "checking for ld used by $CC... " >&6; } - case $host in - *-*-mingw*) - # gcc leaves a trailing carriage return which upsets mingw - ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; - *) - ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; - esac - case $ac_prog in - # Accept absolute paths. - [\\/]* | ?:[\\/]*) - re_direlt='/[^/][^/]*/\.\./' - # Canonicalize the pathname of ld - ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'` - while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do - ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"` - done - test -z "$LD" && LD="$ac_prog" - ;; - "") - # If it fails, then pretend we aren't using GCC. - ac_prog=ld - ;; - *) - # If it is relative, then search for the first ld in PATH. - with_gnu_ld=unknown - ;; - esac -elif test "$with_gnu_ld" = yes; then - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU ld" >&5 -$as_echo_n "checking for GNU ld... " >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for non-GNU ld" >&5 -$as_echo_n "checking for non-GNU ld... " >&6; } -fi -if ${lt_cv_path_LD+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -z "$LD"; then - lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR - for ac_dir in $PATH; do - IFS="$lt_save_ifs" - test -z "$ac_dir" && ac_dir=. - if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then - lt_cv_path_LD="$ac_dir/$ac_prog" - # Check to see if the program is GNU ld. I'd rather use --version, - # but apparently some variants of GNU ld only accept -v. - # Break only if it was the GNU/non-GNU ld that we prefer. - case `"$lt_cv_path_LD" -v 2>&1 &5 -$as_echo "$LD" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi -test -z "$LD" && as_fn_error $? "no acceptable ld found in \$PATH" "$LINENO" 5 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if the linker ($LD) is GNU ld" >&5 -$as_echo_n "checking if the linker ($LD) is GNU ld... " >&6; } -if ${lt_cv_prog_gnu_ld+:} false; then : - $as_echo_n "(cached) " >&6 -else - # I'd rather use --version here, but apparently some GNU lds only accept -v. -case `$LD -v 2>&1 &5 -$as_echo "$lt_cv_prog_gnu_ld" >&6; } -with_gnu_ld=$lt_cv_prog_gnu_ld - - - - - - - - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for BSD- or MS-compatible name lister (nm)" >&5 -$as_echo_n "checking for BSD- or MS-compatible name lister (nm)... " >&6; } -if ${lt_cv_path_NM+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$NM"; then - # Let the user override the test. - lt_cv_path_NM="$NM" -else - lt_nm_to_check="${ac_tool_prefix}nm" - if test -n "$ac_tool_prefix" && test "$build" = "$host"; then - lt_nm_to_check="$lt_nm_to_check nm" - fi - for lt_tmp_nm in $lt_nm_to_check; do - lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR - for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do - IFS="$lt_save_ifs" - test -z "$ac_dir" && ac_dir=. - tmp_nm="$ac_dir/$lt_tmp_nm" - if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then - # Check to see if the nm accepts a BSD-compat flag. - # Adding the `sed 1q' prevents false positives on HP-UX, which says: - # nm: unknown option "B" ignored - # Tru64's nm complains that /dev/null is an invalid object file - case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in - */dev/null* | *'Invalid file or object type'*) - lt_cv_path_NM="$tmp_nm -B" - break - ;; - *) - case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in - */dev/null*) - lt_cv_path_NM="$tmp_nm -p" - break - ;; - *) - lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but - continue # so that we can try to find one that supports BSD flags - ;; - esac - ;; - esac - fi - done - IFS="$lt_save_ifs" - done - : ${lt_cv_path_NM=no} -fi -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_NM" >&5 -$as_echo "$lt_cv_path_NM" >&6; } -if test "$lt_cv_path_NM" != "no"; then - NM="$lt_cv_path_NM" -else - # Didn't find any BSD compatible name lister, look for dumpbin. - if test -n "$DUMPBIN"; then : - # Let the user override the test. - else - if test -n "$ac_tool_prefix"; then - for ac_prog in dumpbin "link -dump" - do - # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. -set dummy $ac_tool_prefix$ac_prog; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_DUMPBIN+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$DUMPBIN"; then - ac_cv_prog_DUMPBIN="$DUMPBIN" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_DUMPBIN="$ac_tool_prefix$ac_prog" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -DUMPBIN=$ac_cv_prog_DUMPBIN -if test -n "$DUMPBIN"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DUMPBIN" >&5 -$as_echo "$DUMPBIN" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - test -n "$DUMPBIN" && break - done -fi -if test -z "$DUMPBIN"; then - ac_ct_DUMPBIN=$DUMPBIN - for ac_prog in dumpbin "link -dump" -do - # Extract the first word of "$ac_prog", so it can be a program name with args. -set dummy $ac_prog; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_DUMPBIN+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_DUMPBIN"; then - ac_cv_prog_ac_ct_DUMPBIN="$ac_ct_DUMPBIN" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_DUMPBIN="$ac_prog" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_DUMPBIN=$ac_cv_prog_ac_ct_DUMPBIN -if test -n "$ac_ct_DUMPBIN"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DUMPBIN" >&5 -$as_echo "$ac_ct_DUMPBIN" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - test -n "$ac_ct_DUMPBIN" && break -done - - if test "x$ac_ct_DUMPBIN" = x; then - DUMPBIN=":" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - DUMPBIN=$ac_ct_DUMPBIN - fi -fi - - case `$DUMPBIN -symbols /dev/null 2>&1 | sed '1q'` in - *COFF*) - DUMPBIN="$DUMPBIN -symbols" - ;; - *) - DUMPBIN=: - ;; - esac - fi - - if test "$DUMPBIN" != ":"; then - NM="$DUMPBIN" - fi -fi -test -z "$NM" && NM=nm - - - - - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking the name lister ($NM) interface" >&5 -$as_echo_n "checking the name lister ($NM) interface... " >&6; } -if ${lt_cv_nm_interface+:} false; then : - $as_echo_n "(cached) " >&6 -else - lt_cv_nm_interface="BSD nm" - echo "int some_variable = 0;" > conftest.$ac_ext - (eval echo "\"\$as_me:$LINENO: $ac_compile\"" >&5) - (eval "$ac_compile" 2>conftest.err) - cat conftest.err >&5 - (eval echo "\"\$as_me:$LINENO: $NM \\\"conftest.$ac_objext\\\"\"" >&5) - (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out) - cat conftest.err >&5 - (eval echo "\"\$as_me:$LINENO: output\"" >&5) - cat conftest.out >&5 - if $GREP 'External.*some_variable' conftest.out > /dev/null; then - lt_cv_nm_interface="MS dumpbin" - fi - rm -f conftest* -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_nm_interface" >&5 -$as_echo "$lt_cv_nm_interface" >&6; } - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ln -s works" >&5 -$as_echo_n "checking whether ln -s works... " >&6; } -LN_S=$as_ln_s -if test "$LN_S" = "ln -s"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -$as_echo "yes" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no, using $LN_S" >&5 -$as_echo "no, using $LN_S" >&6; } -fi - -# find the maximum length of command line arguments -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking the maximum length of command line arguments" >&5 -$as_echo_n "checking the maximum length of command line arguments... " >&6; } -if ${lt_cv_sys_max_cmd_len+:} false; then : - $as_echo_n "(cached) " >&6 -else - i=0 - teststring="ABCD" - - case $build_os in - msdosdjgpp*) - # On DJGPP, this test can blow up pretty badly due to problems in libc - # (any single argument exceeding 2000 bytes causes a buffer overrun - # during glob expansion). Even if it were fixed, the result of this - # check would be larger than it should be. - lt_cv_sys_max_cmd_len=12288; # 12K is about right - ;; - - gnu*) - # Under GNU Hurd, this test is not required because there is - # no limit to the length of command line arguments. - # Libtool will interpret -1 as no limit whatsoever - lt_cv_sys_max_cmd_len=-1; - ;; - - cygwin* | mingw* | cegcc*) - # On Win9x/ME, this test blows up -- it succeeds, but takes - # about 5 minutes as the teststring grows exponentially. - # Worse, since 9x/ME are not pre-emptively multitasking, - # you end up with a "frozen" computer, even though with patience - # the test eventually succeeds (with a max line length of 256k). - # Instead, let's just punt: use the minimum linelength reported by - # all of the supported platforms: 8192 (on NT/2K/XP). - lt_cv_sys_max_cmd_len=8192; - ;; - - mint*) - # On MiNT this can take a long time and run out of memory. - lt_cv_sys_max_cmd_len=8192; - ;; - - amigaos*) - # On AmigaOS with pdksh, this test takes hours, literally. - # So we just punt and use a minimum line length of 8192. - lt_cv_sys_max_cmd_len=8192; - ;; - - netbsd* | freebsd* | openbsd* | darwin* | dragonfly*) - # This has been around since 386BSD, at least. Likely further. - if test -x /sbin/sysctl; then - lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax` - elif test -x /usr/sbin/sysctl; then - lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax` - else - lt_cv_sys_max_cmd_len=65536 # usable default for all BSDs - fi - # And add a safety zone - lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` - lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` - ;; - - interix*) - # We know the value 262144 and hardcode it with a safety zone (like BSD) - lt_cv_sys_max_cmd_len=196608 - ;; - - osf*) - # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure - # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not - # nice to cause kernel panics so lets avoid the loop below. - # First set a reasonable default. - lt_cv_sys_max_cmd_len=16384 - # - if test -x /sbin/sysconfig; then - case `/sbin/sysconfig -q proc exec_disable_arg_limit` in - *1*) lt_cv_sys_max_cmd_len=-1 ;; - esac - fi - ;; - sco3.2v5*) - lt_cv_sys_max_cmd_len=102400 - ;; - sysv5* | sco5v6* | sysv4.2uw2*) - kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null` - if test -n "$kargmax"; then - lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[ ]//'` - else - lt_cv_sys_max_cmd_len=32768 - fi - ;; - *) - lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null` - if test -n "$lt_cv_sys_max_cmd_len"; then - lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` - lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` - else - # Make teststring a little bigger before we do anything with it. - # a 1K string should be a reasonable start. - for i in 1 2 3 4 5 6 7 8 ; do - teststring=$teststring$teststring - done - SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}} - # If test is not a shell built-in, we'll probably end up computing a - # maximum length that is only half of the actual maximum length, but - # we can't tell. - while { test "X"`func_fallback_echo "$teststring$teststring" 2>/dev/null` \ - = "X$teststring$teststring"; } >/dev/null 2>&1 && - test $i != 17 # 1/2 MB should be enough - do - i=`expr $i + 1` - teststring=$teststring$teststring - done - # Only check the string length outside the loop. - lt_cv_sys_max_cmd_len=`expr "X$teststring" : ".*" 2>&1` - teststring= - # Add a significant safety factor because C++ compilers can tack on - # massive amounts of additional arguments before passing them to the - # linker. It appears as though 1/2 is a usable value. - lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2` - fi - ;; - esac - -fi - -if test -n $lt_cv_sys_max_cmd_len ; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_sys_max_cmd_len" >&5 -$as_echo "$lt_cv_sys_max_cmd_len" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: none" >&5 -$as_echo "none" >&6; } -fi -max_cmd_len=$lt_cv_sys_max_cmd_len - - - - - - -: ${CP="cp -f"} -: ${MV="mv -f"} -: ${RM="rm -f"} - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the shell understands some XSI constructs" >&5 -$as_echo_n "checking whether the shell understands some XSI constructs... " >&6; } -# Try some XSI features -xsi_shell=no -( _lt_dummy="a/b/c" - test "${_lt_dummy##*/},${_lt_dummy%/*},${_lt_dummy#??}"${_lt_dummy%"$_lt_dummy"}, \ - = c,a/b,b/c, \ - && eval 'test $(( 1 + 1 )) -eq 2 \ - && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \ - && xsi_shell=yes -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $xsi_shell" >&5 -$as_echo "$xsi_shell" >&6; } - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the shell understands \"+=\"" >&5 -$as_echo_n "checking whether the shell understands \"+=\"... " >&6; } -lt_shell_append=no -( foo=bar; set foo baz; eval "$1+=\$2" && test "$foo" = barbaz ) \ - >/dev/null 2>&1 \ - && lt_shell_append=yes -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_shell_append" >&5 -$as_echo "$lt_shell_append" >&6; } - - -if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then - lt_unset=unset -else - lt_unset=false -fi - - - - - -# test EBCDIC or ASCII -case `echo X|tr X '\101'` in - A) # ASCII based system - # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr - lt_SP2NL='tr \040 \012' - lt_NL2SP='tr \015\012 \040\040' - ;; - *) # EBCDIC based system - lt_SP2NL='tr \100 \n' - lt_NL2SP='tr \r\n \100\100' - ;; -esac - - - - - - - - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to convert $build file names to $host format" >&5 -$as_echo_n "checking how to convert $build file names to $host format... " >&6; } -if ${lt_cv_to_host_file_cmd+:} false; then : - $as_echo_n "(cached) " >&6 -else - case $host in - *-*-mingw* ) - case $build in - *-*-mingw* ) # actually msys - lt_cv_to_host_file_cmd=func_convert_file_msys_to_w32 - ;; - *-*-cygwin* ) - lt_cv_to_host_file_cmd=func_convert_file_cygwin_to_w32 - ;; - * ) # otherwise, assume *nix - lt_cv_to_host_file_cmd=func_convert_file_nix_to_w32 - ;; - esac - ;; - *-*-cygwin* ) - case $build in - *-*-mingw* ) # actually msys - lt_cv_to_host_file_cmd=func_convert_file_msys_to_cygwin - ;; - *-*-cygwin* ) - lt_cv_to_host_file_cmd=func_convert_file_noop - ;; - * ) # otherwise, assume *nix - lt_cv_to_host_file_cmd=func_convert_file_nix_to_cygwin - ;; - esac - ;; - * ) # unhandled hosts (and "normal" native builds) - lt_cv_to_host_file_cmd=func_convert_file_noop - ;; -esac - -fi - -to_host_file_cmd=$lt_cv_to_host_file_cmd -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_to_host_file_cmd" >&5 -$as_echo "$lt_cv_to_host_file_cmd" >&6; } - - - - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to convert $build file names to toolchain format" >&5 -$as_echo_n "checking how to convert $build file names to toolchain format... " >&6; } -if ${lt_cv_to_tool_file_cmd+:} false; then : - $as_echo_n "(cached) " >&6 -else - #assume ordinary cross tools, or native build. -lt_cv_to_tool_file_cmd=func_convert_file_noop -case $host in - *-*-mingw* ) - case $build in - *-*-mingw* ) # actually msys - lt_cv_to_tool_file_cmd=func_convert_file_msys_to_w32 - ;; - esac - ;; -esac - -fi - -to_tool_file_cmd=$lt_cv_to_tool_file_cmd -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_to_tool_file_cmd" >&5 -$as_echo "$lt_cv_to_tool_file_cmd" >&6; } - - - - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $LD option to reload object files" >&5 -$as_echo_n "checking for $LD option to reload object files... " >&6; } -if ${lt_cv_ld_reload_flag+:} false; then : - $as_echo_n "(cached) " >&6 -else - lt_cv_ld_reload_flag='-r' -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_reload_flag" >&5 -$as_echo "$lt_cv_ld_reload_flag" >&6; } -reload_flag=$lt_cv_ld_reload_flag -case $reload_flag in -"" | " "*) ;; -*) reload_flag=" $reload_flag" ;; -esac -reload_cmds='$LD$reload_flag -o $output$reload_objs' -case $host_os in - cygwin* | mingw* | pw32* | cegcc*) - if test "$GCC" != yes; then - reload_cmds=false - fi - ;; - darwin*) - if test "$GCC" = yes; then - reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs' - else - reload_cmds='$LD$reload_flag -o $output$reload_objs' - fi - ;; -esac - - - - - - - - - -if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}objdump", so it can be a program name with args. -set dummy ${ac_tool_prefix}objdump; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_OBJDUMP+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$OBJDUMP"; then - ac_cv_prog_OBJDUMP="$OBJDUMP" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_OBJDUMP="${ac_tool_prefix}objdump" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -OBJDUMP=$ac_cv_prog_OBJDUMP -if test -n "$OBJDUMP"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OBJDUMP" >&5 -$as_echo "$OBJDUMP" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -fi -if test -z "$ac_cv_prog_OBJDUMP"; then - ac_ct_OBJDUMP=$OBJDUMP - # Extract the first word of "objdump", so it can be a program name with args. -set dummy objdump; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_OBJDUMP+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_OBJDUMP"; then - ac_cv_prog_ac_ct_OBJDUMP="$ac_ct_OBJDUMP" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_OBJDUMP="objdump" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_OBJDUMP=$ac_cv_prog_ac_ct_OBJDUMP -if test -n "$ac_ct_OBJDUMP"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OBJDUMP" >&5 -$as_echo "$ac_ct_OBJDUMP" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - if test "x$ac_ct_OBJDUMP" = x; then - OBJDUMP="false" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - OBJDUMP=$ac_ct_OBJDUMP - fi -else - OBJDUMP="$ac_cv_prog_OBJDUMP" -fi - -test -z "$OBJDUMP" && OBJDUMP=objdump - - - - - - - - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to recognize dependent libraries" >&5 -$as_echo_n "checking how to recognize dependent libraries... " >&6; } -if ${lt_cv_deplibs_check_method+:} false; then : - $as_echo_n "(cached) " >&6 -else - lt_cv_file_magic_cmd='$MAGIC_CMD' -lt_cv_file_magic_test_file= -lt_cv_deplibs_check_method='unknown' -# Need to set the preceding variable on all platforms that support -# interlibrary dependencies. -# 'none' -- dependencies not supported. -# `unknown' -- same as none, but documents that we really don't know. -# 'pass_all' -- all dependencies passed with no checks. -# 'test_compile' -- check by making test program. -# 'file_magic [[regex]]' -- check by looking for files in library path -# which responds to the $file_magic_cmd with a given extended regex. -# If you have `file' or equivalent on your system and you're not sure -# whether `pass_all' will *always* work, you probably want this one. - -case $host_os in -aix[4-9]*) - lt_cv_deplibs_check_method=pass_all - ;; - -beos*) - lt_cv_deplibs_check_method=pass_all - ;; - -bsdi[45]*) - lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)' - lt_cv_file_magic_cmd='/usr/bin/file -L' - lt_cv_file_magic_test_file=/shlib/libc.so - ;; - -cygwin*) - # func_win32_libid is a shell function defined in ltmain.sh - lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' - lt_cv_file_magic_cmd='func_win32_libid' - ;; - -mingw* | pw32*) - # Base MSYS/MinGW do not provide the 'file' command needed by - # func_win32_libid shell function, so use a weaker test based on 'objdump', - # unless we find 'file', for example because we are cross-compiling. - # func_win32_libid assumes BSD nm, so disallow it if using MS dumpbin. - if ( test "$lt_cv_nm_interface" = "BSD nm" && file / ) >/dev/null 2>&1; then - lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' - lt_cv_file_magic_cmd='func_win32_libid' - else - # Keep this pattern in sync with the one in func_win32_libid. - lt_cv_deplibs_check_method='file_magic file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)' - lt_cv_file_magic_cmd='$OBJDUMP -f' - fi - ;; - -cegcc*) - # use the weaker test based on 'objdump'. See mingw*. - lt_cv_deplibs_check_method='file_magic file format pe-arm-.*little(.*architecture: arm)?' - lt_cv_file_magic_cmd='$OBJDUMP -f' - ;; - -darwin* | rhapsody*) - lt_cv_deplibs_check_method=pass_all - ;; - -freebsd* | dragonfly*) - if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then - case $host_cpu in - i*86 ) - # Not sure whether the presence of OpenBSD here was a mistake. - # Let's accept both of them until this is cleared up. - lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[3-9]86 (compact )?demand paged shared library' - lt_cv_file_magic_cmd=/usr/bin/file - lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` - ;; - esac - else - lt_cv_deplibs_check_method=pass_all - fi - ;; - -gnu*) - lt_cv_deplibs_check_method=pass_all - ;; - -haiku*) - lt_cv_deplibs_check_method=pass_all - ;; - -hpux10.20* | hpux11*) - lt_cv_file_magic_cmd=/usr/bin/file - case $host_cpu in - ia64*) - lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - IA64' - lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so - ;; - hppa*64*) - lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF[ -][0-9][0-9])(-bit)?( [LM]SB)? shared object( file)?[, -]* PA-RISC [0-9]\.[0-9]' - lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl - ;; - *) - lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9]\.[0-9]) shared library' - lt_cv_file_magic_test_file=/usr/lib/libc.sl - ;; - esac - ;; - -interix[3-9]*) - # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here - lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|\.a)$' - ;; - -irix5* | irix6* | nonstopux*) - case $LD in - *-32|*"-32 ") libmagic=32-bit;; - *-n32|*"-n32 ") libmagic=N32;; - *-64|*"-64 ") libmagic=64-bit;; - *) libmagic=never-match;; - esac - lt_cv_deplibs_check_method=pass_all - ;; - -# This must be Linux ELF. -linux* | k*bsd*-gnu | kopensolaris*-gnu) - lt_cv_deplibs_check_method=pass_all - ;; - -netbsd* | netbsdelf*-gnu) - if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then - lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$' - else - lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|_pic\.a)$' - fi - ;; - -newos6*) - lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)' - lt_cv_file_magic_cmd=/usr/bin/file - lt_cv_file_magic_test_file=/usr/lib/libnls.so - ;; - -*nto* | *qnx*) - lt_cv_deplibs_check_method=pass_all - ;; - -openbsd*) - if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then - lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|\.so|_pic\.a)$' - else - lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$' - fi - ;; - -osf3* | osf4* | osf5*) - lt_cv_deplibs_check_method=pass_all - ;; - -rdos*) - lt_cv_deplibs_check_method=pass_all - ;; - -solaris*) - lt_cv_deplibs_check_method=pass_all - ;; - -sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) - lt_cv_deplibs_check_method=pass_all - ;; - -sysv4 | sysv4.3*) - case $host_vendor in - motorola) - lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]' - lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*` - ;; - ncr) - lt_cv_deplibs_check_method=pass_all - ;; - sequent) - lt_cv_file_magic_cmd='/bin/file' - lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )' - ;; - sni) - lt_cv_file_magic_cmd='/bin/file' - lt_cv_deplibs_check_method="file_magic ELF [0-9][0-9]*-bit [LM]SB dynamic lib" - lt_cv_file_magic_test_file=/lib/libc.so - ;; - siemens) - lt_cv_deplibs_check_method=pass_all - ;; - pc) - lt_cv_deplibs_check_method=pass_all - ;; - esac - ;; - -tpf*) - lt_cv_deplibs_check_method=pass_all - ;; -esac - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_deplibs_check_method" >&5 -$as_echo "$lt_cv_deplibs_check_method" >&6; } - -file_magic_glob= -want_nocaseglob=no -if test "$build" = "$host"; then - case $host_os in - mingw* | pw32*) - if ( shopt | grep nocaseglob ) >/dev/null 2>&1; then - want_nocaseglob=yes - else - file_magic_glob=`echo aAbBcCdDeEfFgGhHiIjJkKlLmMnNoOpPqQrRsStTuUvVwWxXyYzZ | $SED -e "s/\(..\)/s\/[\1]\/[\1]\/g;/g"` - fi - ;; - esac -fi - -file_magic_cmd=$lt_cv_file_magic_cmd -deplibs_check_method=$lt_cv_deplibs_check_method -test -z "$deplibs_check_method" && deplibs_check_method=unknown - - - - - - - - - - - - - - - - - - - - - - -if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}dlltool", so it can be a program name with args. -set dummy ${ac_tool_prefix}dlltool; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_DLLTOOL+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$DLLTOOL"; then - ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_DLLTOOL="${ac_tool_prefix}dlltool" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -DLLTOOL=$ac_cv_prog_DLLTOOL -if test -n "$DLLTOOL"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DLLTOOL" >&5 -$as_echo "$DLLTOOL" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -fi -if test -z "$ac_cv_prog_DLLTOOL"; then - ac_ct_DLLTOOL=$DLLTOOL - # Extract the first word of "dlltool", so it can be a program name with args. -set dummy dlltool; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_DLLTOOL+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_DLLTOOL"; then - ac_cv_prog_ac_ct_DLLTOOL="$ac_ct_DLLTOOL" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_DLLTOOL="dlltool" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_DLLTOOL=$ac_cv_prog_ac_ct_DLLTOOL -if test -n "$ac_ct_DLLTOOL"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DLLTOOL" >&5 -$as_echo "$ac_ct_DLLTOOL" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - if test "x$ac_ct_DLLTOOL" = x; then - DLLTOOL="false" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - DLLTOOL=$ac_ct_DLLTOOL - fi -else - DLLTOOL="$ac_cv_prog_DLLTOOL" -fi - -test -z "$DLLTOOL" && DLLTOOL=dlltool - - - - - - - - - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to associate runtime and link libraries" >&5 -$as_echo_n "checking how to associate runtime and link libraries... " >&6; } -if ${lt_cv_sharedlib_from_linklib_cmd+:} false; then : - $as_echo_n "(cached) " >&6 -else - lt_cv_sharedlib_from_linklib_cmd='unknown' - -case $host_os in -cygwin* | mingw* | pw32* | cegcc*) - # two different shell functions defined in ltmain.sh - # decide which to use based on capabilities of $DLLTOOL - case `$DLLTOOL --help 2>&1` in - *--identify-strict*) - lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib - ;; - *) - lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib_fallback - ;; - esac - ;; -*) - # fallback: assume linklib IS sharedlib - lt_cv_sharedlib_from_linklib_cmd="$ECHO" - ;; -esac - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_sharedlib_from_linklib_cmd" >&5 -$as_echo "$lt_cv_sharedlib_from_linklib_cmd" >&6; } -sharedlib_from_linklib_cmd=$lt_cv_sharedlib_from_linklib_cmd -test -z "$sharedlib_from_linklib_cmd" && sharedlib_from_linklib_cmd=$ECHO - - - - - - - - -if test -n "$ac_tool_prefix"; then - for ac_prog in ar - do - # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. -set dummy $ac_tool_prefix$ac_prog; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_AR+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$AR"; then - ac_cv_prog_AR="$AR" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_AR="$ac_tool_prefix$ac_prog" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -AR=$ac_cv_prog_AR -if test -n "$AR"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AR" >&5 -$as_echo "$AR" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - test -n "$AR" && break - done -fi -if test -z "$AR"; then - ac_ct_AR=$AR - for ac_prog in ar -do - # Extract the first word of "$ac_prog", so it can be a program name with args. -set dummy $ac_prog; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_AR+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_AR"; then - ac_cv_prog_ac_ct_AR="$ac_ct_AR" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_AR="$ac_prog" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_AR=$ac_cv_prog_ac_ct_AR -if test -n "$ac_ct_AR"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_AR" >&5 -$as_echo "$ac_ct_AR" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - test -n "$ac_ct_AR" && break -done - - if test "x$ac_ct_AR" = x; then - AR="false" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - AR=$ac_ct_AR - fi -fi - -: ${AR=ar} -: ${AR_FLAGS=cru} - - - - - - - - - - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for archiver @FILE support" >&5 -$as_echo_n "checking for archiver @FILE support... " >&6; } -if ${lt_cv_ar_at_file+:} false; then : - $as_echo_n "(cached) " >&6 -else - lt_cv_ar_at_file=no - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - echo conftest.$ac_objext > conftest.lst - lt_ar_try='$AR $AR_FLAGS libconftest.a @conftest.lst >&5' - { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$lt_ar_try\""; } >&5 - (eval $lt_ar_try) 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } - if test "$ac_status" -eq 0; then - # Ensure the archiver fails upon bogus file names. - rm -f conftest.$ac_objext libconftest.a - { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$lt_ar_try\""; } >&5 - (eval $lt_ar_try) 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } - if test "$ac_status" -ne 0; then - lt_cv_ar_at_file=@ - fi - fi - rm -f conftest.* libconftest.a - -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ar_at_file" >&5 -$as_echo "$lt_cv_ar_at_file" >&6; } - -if test "x$lt_cv_ar_at_file" = xno; then - archiver_list_spec= -else - archiver_list_spec=$lt_cv_ar_at_file -fi - - - - - - - -if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. -set dummy ${ac_tool_prefix}strip; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_STRIP+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$STRIP"; then - ac_cv_prog_STRIP="$STRIP" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_STRIP="${ac_tool_prefix}strip" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -STRIP=$ac_cv_prog_STRIP -if test -n "$STRIP"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5 -$as_echo "$STRIP" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -fi -if test -z "$ac_cv_prog_STRIP"; then - ac_ct_STRIP=$STRIP - # Extract the first word of "strip", so it can be a program name with args. -set dummy strip; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_STRIP+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_STRIP"; then - ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_STRIP="strip" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP -if test -n "$ac_ct_STRIP"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5 -$as_echo "$ac_ct_STRIP" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - if test "x$ac_ct_STRIP" = x; then - STRIP=":" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - STRIP=$ac_ct_STRIP - fi -else - STRIP="$ac_cv_prog_STRIP" -fi - -test -z "$STRIP" && STRIP=: - - - - - - -if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args. -set dummy ${ac_tool_prefix}ranlib; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_RANLIB+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$RANLIB"; then - ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -RANLIB=$ac_cv_prog_RANLIB -if test -n "$RANLIB"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $RANLIB" >&5 -$as_echo "$RANLIB" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -fi -if test -z "$ac_cv_prog_RANLIB"; then - ac_ct_RANLIB=$RANLIB - # Extract the first word of "ranlib", so it can be a program name with args. -set dummy ranlib; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_RANLIB+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_RANLIB"; then - ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_RANLIB="ranlib" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB -if test -n "$ac_ct_RANLIB"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_RANLIB" >&5 -$as_echo "$ac_ct_RANLIB" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - if test "x$ac_ct_RANLIB" = x; then - RANLIB=":" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - RANLIB=$ac_ct_RANLIB - fi -else - RANLIB="$ac_cv_prog_RANLIB" -fi - -test -z "$RANLIB" && RANLIB=: - - - - - - -# Determine commands to create old-style static archives. -old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs' -old_postinstall_cmds='chmod 644 $oldlib' -old_postuninstall_cmds= - -if test -n "$RANLIB"; then - case $host_os in - openbsd*) - old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$oldlib" - ;; - *) - old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$oldlib" - ;; - esac - old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib" -fi - -case $host_os in - darwin*) - lock_old_archive_extraction=yes ;; - *) - lock_old_archive_extraction=no ;; -esac - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -# If no C compiler was specified, use CC. -LTCC=${LTCC-"$CC"} - -# If no C compiler flags were specified, use CFLAGS. -LTCFLAGS=${LTCFLAGS-"$CFLAGS"} - -# Allow CC to be a program name with arguments. -compiler=$CC - - -# Check for command to grab the raw symbol name followed by C symbol from nm. -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking command to parse $NM output from $compiler object" >&5 -$as_echo_n "checking command to parse $NM output from $compiler object... " >&6; } -if ${lt_cv_sys_global_symbol_pipe+:} false; then : - $as_echo_n "(cached) " >&6 -else - -# These are sane defaults that work on at least a few old systems. -# [They come from Ultrix. What could be older than Ultrix?!! ;)] - -# Character class describing NM global symbol codes. -symcode='[BCDEGRST]' - -# Regexp to match symbols that can be accessed directly from C. -sympat='\([_A-Za-z][_A-Za-z0-9]*\)' - -# Define system-specific variables. -case $host_os in -aix*) - symcode='[BCDT]' - ;; -cygwin* | mingw* | pw32* | cegcc*) - symcode='[ABCDGISTW]' - ;; -hpux*) - if test "$host_cpu" = ia64; then - symcode='[ABCDEGRST]' - fi - ;; -irix* | nonstopux*) - symcode='[BCDEGRST]' - ;; -osf*) - symcode='[BCDEGQRST]' - ;; -solaris*) - symcode='[BDRT]' - ;; -sco3.2v5*) - symcode='[DT]' - ;; -sysv4.2uw2*) - symcode='[DT]' - ;; -sysv5* | sco5v6* | unixware* | OpenUNIX*) - symcode='[ABDT]' - ;; -sysv4) - symcode='[DFNSTU]' - ;; -esac - -# If we're using GNU nm, then use its standard symbol codes. -case `$NM -V 2>&1` in -*GNU* | *'with BFD'*) - symcode='[ABCDGIRSTW]' ;; -esac - -# Transform an extracted symbol line into a proper C declaration. -# Some systems (esp. on ia64) link data and code symbols differently, -# so use this general approach. -lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" - -# Transform an extracted symbol line into symbol name and symbol address -lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\)[ ]*$/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"\2\", (void *) \&\2},/p'" -lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([^ ]*\)[ ]*$/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \(lib[^ ]*\)$/ {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"lib\2\", (void *) \&\2},/p'" - -# Handle CRLF in mingw tool chain -opt_cr= -case $build_os in -mingw*) - opt_cr=`$ECHO 'x\{0,1\}' | tr x '\015'` # option cr in regexp - ;; -esac - -# Try without a prefix underscore, then with it. -for ac_symprfx in "" "_"; do - - # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol. - symxfrm="\\1 $ac_symprfx\\2 \\2" - - # Write the raw and C identifiers. - if test "$lt_cv_nm_interface" = "MS dumpbin"; then - # Fake it for dumpbin and say T for any non-static function - # and D for any global variable. - # Also find C++ and __fastcall symbols from MSVC++, - # which start with @ or ?. - lt_cv_sys_global_symbol_pipe="$AWK '"\ -" {last_section=section; section=\$ 3};"\ -" /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\ -" \$ 0!~/External *\|/{next};"\ -" / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\ -" {if(hide[section]) next};"\ -" {f=0}; \$ 0~/\(\).*\|/{f=1}; {printf f ? \"T \" : \"D \"};"\ -" {split(\$ 0, a, /\||\r/); split(a[2], s)};"\ -" s[1]~/^[@?]/{print s[1], s[1]; next};"\ -" s[1]~prfx {split(s[1],t,\"@\"); print t[1], substr(t[1],length(prfx))}"\ -" ' prfx=^$ac_symprfx" - else - lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[ ]\($symcode$symcode*\)[ ][ ]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'" - fi - lt_cv_sys_global_symbol_pipe="$lt_cv_sys_global_symbol_pipe | sed '/ __gnu_lto/d'" - - # Check to see that the pipe works correctly. - pipe_works=no - - rm -f conftest* - cat > conftest.$ac_ext <<_LT_EOF -#ifdef __cplusplus -extern "C" { -#endif -char nm_test_var; -void nm_test_func(void); -void nm_test_func(void){} -#ifdef __cplusplus -} -#endif -int main(){nm_test_var='a';nm_test_func();return(0);} -_LT_EOF - - if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then - # Now try to grab the symbols. - nlist=conftest.nm - if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist\""; } >&5 - (eval $NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist) 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } && test -s "$nlist"; then - # Try sorting and uniquifying the output. - if sort "$nlist" | uniq > "$nlist"T; then - mv -f "$nlist"T "$nlist" - else - rm -f "$nlist"T - fi - - # Make sure that we snagged all the symbols we need. - if $GREP ' nm_test_var$' "$nlist" >/dev/null; then - if $GREP ' nm_test_func$' "$nlist" >/dev/null; then - cat <<_LT_EOF > conftest.$ac_ext -/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests. */ -#if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE) -/* DATA imports from DLLs on WIN32 con't be const, because runtime - relocations are performed -- see ld's documentation on pseudo-relocs. */ -# define LT@&t@_DLSYM_CONST -#elif defined(__osf__) -/* This system does not cope well with relocations in const data. */ -# define LT@&t@_DLSYM_CONST -#else -# define LT@&t@_DLSYM_CONST const -#endif - -#ifdef __cplusplus -extern "C" { -#endif - -_LT_EOF - # Now generate the symbol file. - eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | $GREP -v main >> conftest.$ac_ext' - - cat <<_LT_EOF >> conftest.$ac_ext - -/* The mapping between symbol names and symbols. */ -LT@&t@_DLSYM_CONST struct { - const char *name; - void *address; -} -lt__PROGRAM__LTX_preloaded_symbols[] = -{ - { "@PROGRAM@", (void *) 0 }, -_LT_EOF - $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (void *) \&\2},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext - cat <<\_LT_EOF >> conftest.$ac_ext - {0, (void *) 0} -}; - -/* This works around a problem in FreeBSD linker */ -#ifdef FREEBSD_WORKAROUND -static const void *lt_preloaded_setup() { - return lt__PROGRAM__LTX_preloaded_symbols; -} -#endif - -#ifdef __cplusplus -} -#endif -_LT_EOF - # Now try linking the two files. - mv conftest.$ac_objext conftstm.$ac_objext - lt_globsym_save_LIBS=$LIBS - lt_globsym_save_CFLAGS=$CFLAGS - LIBS="conftstm.$ac_objext" - CFLAGS="$CFLAGS$lt_prog_compiler_no_builtin_flag" - if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5 - (eval $ac_link) 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } && test -s conftest${ac_exeext}; then - pipe_works=yes - fi - LIBS=$lt_globsym_save_LIBS - CFLAGS=$lt_globsym_save_CFLAGS - else - echo "cannot find nm_test_func in $nlist" >&5 - fi - else - echo "cannot find nm_test_var in $nlist" >&5 - fi - else - echo "cannot run $lt_cv_sys_global_symbol_pipe" >&5 - fi - else - echo "$progname: failed program was:" >&5 - cat conftest.$ac_ext >&5 - fi - rm -rf conftest* conftst* - - # Do not use the global_symbol_pipe unless it works. - if test "$pipe_works" = yes; then - break - else - lt_cv_sys_global_symbol_pipe= - fi -done - -fi - -if test -z "$lt_cv_sys_global_symbol_pipe"; then - lt_cv_sys_global_symbol_to_cdecl= -fi -if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: failed" >&5 -$as_echo "failed" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: ok" >&5 -$as_echo "ok" >&6; } -fi - -# Response file support. -if test "$lt_cv_nm_interface" = "MS dumpbin"; then - nm_file_list_spec='@' -elif $NM --help 2>/dev/null | grep '[@]FILE' >/dev/null; then - nm_file_list_spec='@' -fi - - - - - - - - - - - - - - - - - - - - - - - - - - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for sysroot" >&5 -$as_echo_n "checking for sysroot... " >&6; } - -@%:@ Check whether --with-sysroot was given. -if test "${with_sysroot+set}" = set; then : - withval=$with_sysroot; -else - with_sysroot=no -fi - - -lt_sysroot= -case ${with_sysroot} in #( - yes) - if test "$GCC" = yes; then - lt_sysroot=`$CC --print-sysroot 2>/dev/null` - fi - ;; #( - /*) - lt_sysroot=`echo "$with_sysroot" | sed -e "$sed_quote_subst"` - ;; #( - no|'') - ;; #( - *) - { $as_echo "$as_me:${as_lineno-$LINENO}: result: ${with_sysroot}" >&5 -$as_echo "${with_sysroot}" >&6; } - as_fn_error $? "The sysroot must be an absolute path." "$LINENO" 5 - ;; -esac - - { $as_echo "$as_me:${as_lineno-$LINENO}: result: ${lt_sysroot:-no}" >&5 -$as_echo "${lt_sysroot:-no}" >&6; } - - - - - -@%:@ Check whether --enable-libtool-lock was given. -if test "${enable_libtool_lock+set}" = set; then : - enableval=$enable_libtool_lock; -fi - -test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes - -# Some flags need to be propagated to the compiler or linker for good -# libtool support. -case $host in -ia64-*-hpux*) - # Find out which ABI we are using. - echo 'int i;' > conftest.$ac_ext - if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then - case `/usr/bin/file conftest.$ac_objext` in - *ELF-32*) - HPUX_IA64_MODE="32" - ;; - *ELF-64*) - HPUX_IA64_MODE="64" - ;; - esac - fi - rm -rf conftest* - ;; -*-*-irix6*) - # Find out which ABI we are using. - echo '#line '$LINENO' "configure"' > conftest.$ac_ext - if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then - if test "$lt_cv_prog_gnu_ld" = yes; then - case `/usr/bin/file conftest.$ac_objext` in - *32-bit*) - LD="${LD-ld} -melf32bsmip" - ;; - *N32*) - LD="${LD-ld} -melf32bmipn32" - ;; - *64-bit*) - LD="${LD-ld} -melf64bmip" - ;; - esac - else - case `/usr/bin/file conftest.$ac_objext` in - *32-bit*) - LD="${LD-ld} -32" - ;; - *N32*) - LD="${LD-ld} -n32" - ;; - *64-bit*) - LD="${LD-ld} -64" - ;; - esac - fi - fi - rm -rf conftest* - ;; - -x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \ -s390*-*linux*|s390*-*tpf*|sparc*-*linux*) - # Find out which ABI we are using. - echo 'int i;' > conftest.$ac_ext - if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then - case `/usr/bin/file conftest.o` in - *32-bit*) - case $host in - x86_64-*kfreebsd*-gnu) - LD="${LD-ld} -m elf_i386_fbsd" - ;; - x86_64-*linux*) - LD="${LD-ld} -m elf_i386" - ;; - ppc64-*linux*|powerpc64-*linux*) - LD="${LD-ld} -m elf32ppclinux" - ;; - s390x-*linux*) - LD="${LD-ld} -m elf_s390" - ;; - sparc64-*linux*) - LD="${LD-ld} -m elf32_sparc" - ;; - esac - ;; - *64-bit*) - case $host in - x86_64-*kfreebsd*-gnu) - LD="${LD-ld} -m elf_x86_64_fbsd" - ;; - x86_64-*linux*) - LD="${LD-ld} -m elf_x86_64" - ;; - ppc*-*linux*|powerpc*-*linux*) - LD="${LD-ld} -m elf64ppc" - ;; - s390*-*linux*|s390*-*tpf*) - LD="${LD-ld} -m elf64_s390" - ;; - sparc*-*linux*) - LD="${LD-ld} -m elf64_sparc" - ;; - esac - ;; - esac - fi - rm -rf conftest* - ;; - -*-*-sco3.2v5*) - # On SCO OpenServer 5, we need -belf to get full-featured binaries. - SAVE_CFLAGS="$CFLAGS" - CFLAGS="$CFLAGS -belf" - { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler needs -belf" >&5 -$as_echo_n "checking whether the C compiler needs -belf... " >&6; } -if ${lt_cv_cc_needs_belf+:} false; then : - $as_echo_n "(cached) " >&6 -else - ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - lt_cv_cc_needs_belf=yes -else - lt_cv_cc_needs_belf=no -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext - ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_cc_needs_belf" >&5 -$as_echo "$lt_cv_cc_needs_belf" >&6; } - if test x"$lt_cv_cc_needs_belf" != x"yes"; then - # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf - CFLAGS="$SAVE_CFLAGS" - fi - ;; -sparc*-*solaris*) - # Find out which ABI we are using. - echo 'int i;' > conftest.$ac_ext - if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; }; then - case `/usr/bin/file conftest.o` in - *64-bit*) - case $lt_cv_prog_gnu_ld in - yes*) LD="${LD-ld} -m elf64_sparc" ;; - *) - if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then - LD="${LD-ld} -64" - fi - ;; - esac - ;; - esac - fi - rm -rf conftest* - ;; -esac - -need_locks="$enable_libtool_lock" - -if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}mt", so it can be a program name with args. -set dummy ${ac_tool_prefix}mt; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_MANIFEST_TOOL+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$MANIFEST_TOOL"; then - ac_cv_prog_MANIFEST_TOOL="$MANIFEST_TOOL" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_MANIFEST_TOOL="${ac_tool_prefix}mt" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -MANIFEST_TOOL=$ac_cv_prog_MANIFEST_TOOL -if test -n "$MANIFEST_TOOL"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MANIFEST_TOOL" >&5 -$as_echo "$MANIFEST_TOOL" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -fi -if test -z "$ac_cv_prog_MANIFEST_TOOL"; then - ac_ct_MANIFEST_TOOL=$MANIFEST_TOOL - # Extract the first word of "mt", so it can be a program name with args. -set dummy mt; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_MANIFEST_TOOL+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_MANIFEST_TOOL"; then - ac_cv_prog_ac_ct_MANIFEST_TOOL="$ac_ct_MANIFEST_TOOL" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_MANIFEST_TOOL="mt" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_MANIFEST_TOOL=$ac_cv_prog_ac_ct_MANIFEST_TOOL -if test -n "$ac_ct_MANIFEST_TOOL"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_MANIFEST_TOOL" >&5 -$as_echo "$ac_ct_MANIFEST_TOOL" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - if test "x$ac_ct_MANIFEST_TOOL" = x; then - MANIFEST_TOOL=":" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - MANIFEST_TOOL=$ac_ct_MANIFEST_TOOL - fi -else - MANIFEST_TOOL="$ac_cv_prog_MANIFEST_TOOL" -fi - -test -z "$MANIFEST_TOOL" && MANIFEST_TOOL=mt -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $MANIFEST_TOOL is a manifest tool" >&5 -$as_echo_n "checking if $MANIFEST_TOOL is a manifest tool... " >&6; } -if ${lt_cv_path_mainfest_tool+:} false; then : - $as_echo_n "(cached) " >&6 -else - lt_cv_path_mainfest_tool=no - echo "$as_me:$LINENO: $MANIFEST_TOOL '-?'" >&5 - $MANIFEST_TOOL '-?' 2>conftest.err > conftest.out - cat conftest.err >&5 - if $GREP 'Manifest Tool' conftest.out > /dev/null; then - lt_cv_path_mainfest_tool=yes - fi - rm -f conftest* -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_mainfest_tool" >&5 -$as_echo "$lt_cv_path_mainfest_tool" >&6; } -if test "x$lt_cv_path_mainfest_tool" != xyes; then - MANIFEST_TOOL=: -fi - - - - - - - case $host_os in - rhapsody* | darwin*) - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}dsymutil", so it can be a program name with args. -set dummy ${ac_tool_prefix}dsymutil; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_DSYMUTIL+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$DSYMUTIL"; then - ac_cv_prog_DSYMUTIL="$DSYMUTIL" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_DSYMUTIL="${ac_tool_prefix}dsymutil" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -DSYMUTIL=$ac_cv_prog_DSYMUTIL -if test -n "$DSYMUTIL"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DSYMUTIL" >&5 -$as_echo "$DSYMUTIL" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -fi -if test -z "$ac_cv_prog_DSYMUTIL"; then - ac_ct_DSYMUTIL=$DSYMUTIL - # Extract the first word of "dsymutil", so it can be a program name with args. -set dummy dsymutil; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_DSYMUTIL+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_DSYMUTIL"; then - ac_cv_prog_ac_ct_DSYMUTIL="$ac_ct_DSYMUTIL" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_DSYMUTIL="dsymutil" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_DSYMUTIL=$ac_cv_prog_ac_ct_DSYMUTIL -if test -n "$ac_ct_DSYMUTIL"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DSYMUTIL" >&5 -$as_echo "$ac_ct_DSYMUTIL" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - if test "x$ac_ct_DSYMUTIL" = x; then - DSYMUTIL=":" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - DSYMUTIL=$ac_ct_DSYMUTIL - fi -else - DSYMUTIL="$ac_cv_prog_DSYMUTIL" -fi - - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}nmedit", so it can be a program name with args. -set dummy ${ac_tool_prefix}nmedit; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_NMEDIT+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$NMEDIT"; then - ac_cv_prog_NMEDIT="$NMEDIT" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_NMEDIT="${ac_tool_prefix}nmedit" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -NMEDIT=$ac_cv_prog_NMEDIT -if test -n "$NMEDIT"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $NMEDIT" >&5 -$as_echo "$NMEDIT" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -fi -if test -z "$ac_cv_prog_NMEDIT"; then - ac_ct_NMEDIT=$NMEDIT - # Extract the first word of "nmedit", so it can be a program name with args. -set dummy nmedit; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_NMEDIT+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_NMEDIT"; then - ac_cv_prog_ac_ct_NMEDIT="$ac_ct_NMEDIT" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_NMEDIT="nmedit" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_NMEDIT=$ac_cv_prog_ac_ct_NMEDIT -if test -n "$ac_ct_NMEDIT"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_NMEDIT" >&5 -$as_echo "$ac_ct_NMEDIT" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - if test "x$ac_ct_NMEDIT" = x; then - NMEDIT=":" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - NMEDIT=$ac_ct_NMEDIT - fi -else - NMEDIT="$ac_cv_prog_NMEDIT" -fi - - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}lipo", so it can be a program name with args. -set dummy ${ac_tool_prefix}lipo; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_LIPO+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$LIPO"; then - ac_cv_prog_LIPO="$LIPO" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_LIPO="${ac_tool_prefix}lipo" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -LIPO=$ac_cv_prog_LIPO -if test -n "$LIPO"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LIPO" >&5 -$as_echo "$LIPO" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -fi -if test -z "$ac_cv_prog_LIPO"; then - ac_ct_LIPO=$LIPO - # Extract the first word of "lipo", so it can be a program name with args. -set dummy lipo; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_LIPO+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_LIPO"; then - ac_cv_prog_ac_ct_LIPO="$ac_ct_LIPO" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_LIPO="lipo" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_LIPO=$ac_cv_prog_ac_ct_LIPO -if test -n "$ac_ct_LIPO"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_LIPO" >&5 -$as_echo "$ac_ct_LIPO" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - if test "x$ac_ct_LIPO" = x; then - LIPO=":" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - LIPO=$ac_ct_LIPO - fi -else - LIPO="$ac_cv_prog_LIPO" -fi - - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}otool", so it can be a program name with args. -set dummy ${ac_tool_prefix}otool; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_OTOOL+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$OTOOL"; then - ac_cv_prog_OTOOL="$OTOOL" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_OTOOL="${ac_tool_prefix}otool" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -OTOOL=$ac_cv_prog_OTOOL -if test -n "$OTOOL"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OTOOL" >&5 -$as_echo "$OTOOL" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -fi -if test -z "$ac_cv_prog_OTOOL"; then - ac_ct_OTOOL=$OTOOL - # Extract the first word of "otool", so it can be a program name with args. -set dummy otool; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_OTOOL+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_OTOOL"; then - ac_cv_prog_ac_ct_OTOOL="$ac_ct_OTOOL" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_OTOOL="otool" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_OTOOL=$ac_cv_prog_ac_ct_OTOOL -if test -n "$ac_ct_OTOOL"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OTOOL" >&5 -$as_echo "$ac_ct_OTOOL" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - if test "x$ac_ct_OTOOL" = x; then - OTOOL=":" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - OTOOL=$ac_ct_OTOOL - fi -else - OTOOL="$ac_cv_prog_OTOOL" -fi - - if test -n "$ac_tool_prefix"; then - # Extract the first word of "${ac_tool_prefix}otool64", so it can be a program name with args. -set dummy ${ac_tool_prefix}otool64; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_OTOOL64+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$OTOOL64"; then - ac_cv_prog_OTOOL64="$OTOOL64" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_OTOOL64="${ac_tool_prefix}otool64" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -OTOOL64=$ac_cv_prog_OTOOL64 -if test -n "$OTOOL64"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OTOOL64" >&5 -$as_echo "$OTOOL64" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - -fi -if test -z "$ac_cv_prog_OTOOL64"; then - ac_ct_OTOOL64=$OTOOL64 - # Extract the first word of "otool64", so it can be a program name with args. -set dummy otool64; ac_word=$2 -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 -$as_echo_n "checking for $ac_word... " >&6; } -if ${ac_cv_prog_ac_ct_OTOOL64+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test -n "$ac_ct_OTOOL64"; then - ac_cv_prog_ac_ct_OTOOL64="$ac_ct_OTOOL64" # Let the user override the test. -else -as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - for ac_exec_ext in '' $ac_executable_extensions; do - if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then - ac_cv_prog_ac_ct_OTOOL64="otool64" - $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 - break 2 - fi -done - done -IFS=$as_save_IFS - -fi -fi -ac_ct_OTOOL64=$ac_cv_prog_ac_ct_OTOOL64 -if test -n "$ac_ct_OTOOL64"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OTOOL64" >&5 -$as_echo "$ac_ct_OTOOL64" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - if test "x$ac_ct_OTOOL64" = x; then - OTOOL64=":" - else - case $cross_compiling:$ac_tool_warned in -yes:) -{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5 -$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} -ac_tool_warned=yes ;; -esac - OTOOL64=$ac_ct_OTOOL64 - fi -else - OTOOL64="$ac_cv_prog_OTOOL64" -fi - - - - - - - - - - - - - - - - - - - - - - - - - - - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -single_module linker flag" >&5 -$as_echo_n "checking for -single_module linker flag... " >&6; } -if ${lt_cv_apple_cc_single_mod+:} false; then : - $as_echo_n "(cached) " >&6 -else - lt_cv_apple_cc_single_mod=no - if test -z "${LT_MULTI_MODULE}"; then - # By default we will add the -single_module flag. You can override - # by either setting the environment variable LT_MULTI_MODULE - # non-empty at configure time, or by adding -multi_module to the - # link flags. - rm -rf libconftest.dylib* - echo "int foo(void){return 1;}" > conftest.c - echo "$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \ --dynamiclib -Wl,-single_module conftest.c" >&5 - $LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \ - -dynamiclib -Wl,-single_module conftest.c 2>conftest.err - _lt_result=$? - if test -f libconftest.dylib && test ! -s conftest.err && test $_lt_result = 0; then - lt_cv_apple_cc_single_mod=yes - else - cat conftest.err >&5 - fi - rm -rf libconftest.dylib* - rm -f conftest.* - fi -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_apple_cc_single_mod" >&5 -$as_echo "$lt_cv_apple_cc_single_mod" >&6; } - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -exported_symbols_list linker flag" >&5 -$as_echo_n "checking for -exported_symbols_list linker flag... " >&6; } -if ${lt_cv_ld_exported_symbols_list+:} false; then : - $as_echo_n "(cached) " >&6 -else - lt_cv_ld_exported_symbols_list=no - save_LDFLAGS=$LDFLAGS - echo "_main" > conftest.sym - LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - lt_cv_ld_exported_symbols_list=yes -else - lt_cv_ld_exported_symbols_list=no -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext - LDFLAGS="$save_LDFLAGS" - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_exported_symbols_list" >&5 -$as_echo "$lt_cv_ld_exported_symbols_list" >&6; } - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -force_load linker flag" >&5 -$as_echo_n "checking for -force_load linker flag... " >&6; } -if ${lt_cv_ld_force_load+:} false; then : - $as_echo_n "(cached) " >&6 -else - lt_cv_ld_force_load=no - cat > conftest.c << _LT_EOF -int forced_loaded() { return 2;} -_LT_EOF - echo "$LTCC $LTCFLAGS -c -o conftest.o conftest.c" >&5 - $LTCC $LTCFLAGS -c -o conftest.o conftest.c 2>&5 - echo "$AR cru libconftest.a conftest.o" >&5 - $AR cru libconftest.a conftest.o 2>&5 - echo "$RANLIB libconftest.a" >&5 - $RANLIB libconftest.a 2>&5 - cat > conftest.c << _LT_EOF -int main() { return 0;} -_LT_EOF - echo "$LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a" >&5 - $LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a 2>conftest.err - _lt_result=$? - if test -f conftest && test ! -s conftest.err && test $_lt_result = 0 && $GREP forced_load conftest 2>&1 >/dev/null; then - lt_cv_ld_force_load=yes - else - cat conftest.err >&5 - fi - rm -f conftest.err libconftest.a conftest conftest.c - rm -rf conftest.dSYM - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_force_load" >&5 -$as_echo "$lt_cv_ld_force_load" >&6; } - case $host_os in - rhapsody* | darwin1.[012]) - _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;; - darwin1.*) - _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; - darwin*) # darwin 5.x on - # if running on 10.5 or later, the deployment target defaults - # to the OS version, if on x86, and 10.4, the deployment - # target defaults to 10.4. Don't you love it? - case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in - 10.0,*86*-darwin8*|10.0,*-darwin[91]*) - _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;; - 10.[012]*) - _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; - 10.*) - _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;; - esac - ;; - esac - if test "$lt_cv_apple_cc_single_mod" = "yes"; then - _lt_dar_single_mod='$single_module' - fi - if test "$lt_cv_ld_exported_symbols_list" = "yes"; then - _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym' - else - _lt_dar_export_syms='~$NMEDIT -s $output_objdir/${libname}-symbols.expsym ${lib}' - fi - if test "$DSYMUTIL" != ":" && test "$lt_cv_ld_force_load" = "no"; then - _lt_dsymutil='~$DSYMUTIL $lib || :' - else - _lt_dsymutil= - fi - ;; - esac - -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to run the C preprocessor" >&5 -$as_echo_n "checking how to run the C preprocessor... " >&6; } -# On Suns, sometimes $CPP names a directory. -if test -n "$CPP" && test -d "$CPP"; then - CPP= -fi -if test -z "$CPP"; then - if ${ac_cv_prog_CPP+:} false; then : - $as_echo_n "(cached) " >&6 -else - # Double quotes because CPP needs to be expanded - for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp" - do - ac_preproc_ok=false -for ac_c_preproc_warn_flag in '' yes -do - # Use a header file that comes with gcc, so configuring glibc - # with a fresh cross-compiler works. - # Prefer to if __STDC__ is defined, since - # exists even on freestanding compilers. - # On the NeXT, cc -E runs the code through the compiler's parser, - # not just through cpp. "Syntax error" is here to catch this case. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -@%:@ifdef __STDC__ -@%:@ include -@%:@else -@%:@ include -@%:@endif - Syntax error -_ACEOF -if ac_fn_c_try_cpp "$LINENO"; then : - -else - # Broken: fails on valid input. -continue -fi -rm -f conftest.err conftest.i conftest.$ac_ext - - # OK, works on sane cases. Now check whether nonexistent headers - # can be detected and how. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -@%:@include -_ACEOF -if ac_fn_c_try_cpp "$LINENO"; then : - # Broken: success on invalid input. -continue -else - # Passes both tests. -ac_preproc_ok=: -break -fi -rm -f conftest.err conftest.i conftest.$ac_ext - -done -# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. -rm -f conftest.i conftest.err conftest.$ac_ext -if $ac_preproc_ok; then : - break -fi - - done - ac_cv_prog_CPP=$CPP - -fi - CPP=$ac_cv_prog_CPP -else - ac_cv_prog_CPP=$CPP -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $CPP" >&5 -$as_echo "$CPP" >&6; } -ac_preproc_ok=false -for ac_c_preproc_warn_flag in '' yes -do - # Use a header file that comes with gcc, so configuring glibc - # with a fresh cross-compiler works. - # Prefer to if __STDC__ is defined, since - # exists even on freestanding compilers. - # On the NeXT, cc -E runs the code through the compiler's parser, - # not just through cpp. "Syntax error" is here to catch this case. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -@%:@ifdef __STDC__ -@%:@ include -@%:@else -@%:@ include -@%:@endif - Syntax error -_ACEOF -if ac_fn_c_try_cpp "$LINENO"; then : - -else - # Broken: fails on valid input. -continue -fi -rm -f conftest.err conftest.i conftest.$ac_ext - - # OK, works on sane cases. Now check whether nonexistent headers - # can be detected and how. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -@%:@include -_ACEOF -if ac_fn_c_try_cpp "$LINENO"; then : - # Broken: success on invalid input. -continue -else - # Passes both tests. -ac_preproc_ok=: -break -fi -rm -f conftest.err conftest.i conftest.$ac_ext - -done -# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. -rm -f conftest.i conftest.err conftest.$ac_ext -if $ac_preproc_ok; then : - -else - { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5 -$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} -as_fn_error $? "C preprocessor \"$CPP\" fails sanity check -See \`config.log' for more details" "$LINENO" 5; } -fi - -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ANSI C header files" >&5 -$as_echo_n "checking for ANSI C header files... " >&6; } -if ${ac_cv_header_stdc+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include -#include -#include -#include - -int -main () -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_compile "$LINENO"; then : - ac_cv_header_stdc=yes -else - ac_cv_header_stdc=no -fi -rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext - -if test $ac_cv_header_stdc = yes; then - # SunOS 4.x string.h does not declare mem*, contrary to ANSI. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include - -_ACEOF -if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - $EGREP "memchr" >/dev/null 2>&1; then : - -else - ac_cv_header_stdc=no -fi -rm -f conftest* - -fi - -if test $ac_cv_header_stdc = yes; then - # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include - -_ACEOF -if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - $EGREP "free" >/dev/null 2>&1; then : - -else - ac_cv_header_stdc=no -fi -rm -f conftest* - -fi - -if test $ac_cv_header_stdc = yes; then - # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi. - if test "$cross_compiling" = yes; then : - : -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -#include -#include -#if ((' ' & 0x0FF) == 0x020) -# define ISLOWER(c) ('a' <= (c) && (c) <= 'z') -# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) -#else -# define ISLOWER(c) \ - (('a' <= (c) && (c) <= 'i') \ - || ('j' <= (c) && (c) <= 'r') \ - || ('s' <= (c) && (c) <= 'z')) -# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c)) -#endif - -#define XOR(e, f) (((e) && !(f)) || (!(e) && (f))) -int -main () -{ - int i; - for (i = 0; i < 256; i++) - if (XOR (islower (i), ISLOWER (i)) - || toupper (i) != TOUPPER (i)) - return 2; - return 0; -} -_ACEOF -if ac_fn_c_try_run "$LINENO"; then : - -else - ac_cv_header_stdc=no -fi -rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \ - conftest.$ac_objext conftest.beam conftest.$ac_ext -fi - -fi -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_stdc" >&5 -$as_echo "$ac_cv_header_stdc" >&6; } -if test $ac_cv_header_stdc = yes; then - -$as_echo "@%:@define STDC_HEADERS 1" >>confdefs.h - -fi - -# On IRIX 5.3, sys/types and inttypes.h are conflicting. -for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \ - inttypes.h stdint.h unistd.h -do : - as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` -ac_fn_c_check_header_compile "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default -" -if eval test \"x\$"$as_ac_Header"\" = x"yes"; then : - cat >>confdefs.h <<_ACEOF -@%:@define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 -_ACEOF - -fi - -done - - -for ac_header in dlfcn.h -do : - ac_fn_c_check_header_compile "$LINENO" "dlfcn.h" "ac_cv_header_dlfcn_h" "$ac_includes_default -" -if test "x$ac_cv_header_dlfcn_h" = xyes; then : - cat >>confdefs.h <<_ACEOF -@%:@define HAVE_DLFCN_H 1 -_ACEOF - -fi - -done - - - - - -# Set options - - - - enable_dlopen=no - - - enable_win32_dll=no - - - @%:@ Check whether --enable-shared was given. -if test "${enable_shared+set}" = set; then : - enableval=$enable_shared; p=${PACKAGE-default} - case $enableval in - yes) enable_shared=yes ;; - no) enable_shared=no ;; - *) - enable_shared=no - # Look at the argument we got. We use all the common list separators. - lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," - for pkg in $enableval; do - IFS="$lt_save_ifs" - if test "X$pkg" = "X$p"; then - enable_shared=yes - fi - done - IFS="$lt_save_ifs" - ;; - esac -else - enable_shared=yes -fi - - - - - - - - - - - -@%:@ Check whether --with-pic was given. -if test "${with_pic+set}" = set; then : - withval=$with_pic; pic_mode="$withval" -else - pic_mode=default -fi - - -test -z "$pic_mode" && pic_mode=default - - - - - - - - @%:@ Check whether --enable-fast-install was given. -if test "${enable_fast_install+set}" = set; then : - enableval=$enable_fast_install; p=${PACKAGE-default} - case $enableval in - yes) enable_fast_install=yes ;; - no) enable_fast_install=no ;; - *) - enable_fast_install=no - # Look at the argument we got. We use all the common list separators. - lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," - for pkg in $enableval; do - IFS="$lt_save_ifs" - if test "X$pkg" = "X$p"; then - enable_fast_install=yes - fi - done - IFS="$lt_save_ifs" - ;; - esac -else - enable_fast_install=yes -fi - - - - - - - - - - - -# This can be used to rebuild libtool when needed -LIBTOOL_DEPS="$ltmain" - -# Always use our own libtool. -LIBTOOL='$(SHELL) $(top_builddir)/libtool' - - - - - - - - - - - - - - - - - - - - - - - - - - -test -z "$LN_S" && LN_S="ln -s" - - - - - - - - - - - - - - -if test -n "${ZSH_VERSION+set}" ; then - setopt NO_GLOB_SUBST -fi - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for objdir" >&5 -$as_echo_n "checking for objdir... " >&6; } -if ${lt_cv_objdir+:} false; then : - $as_echo_n "(cached) " >&6 -else - rm -f .libs 2>/dev/null -mkdir .libs 2>/dev/null -if test -d .libs; then - lt_cv_objdir=.libs -else - # MS-DOS does not allow filenames that begin with a dot. - lt_cv_objdir=_libs -fi -rmdir .libs 2>/dev/null -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_objdir" >&5 -$as_echo "$lt_cv_objdir" >&6; } -objdir=$lt_cv_objdir - - - - - -cat >>confdefs.h <<_ACEOF -@%:@define LT_OBJDIR "$lt_cv_objdir/" -_ACEOF - - - - -case $host_os in -aix3*) - # AIX sometimes has problems with the GCC collect2 program. For some - # reason, if we set the COLLECT_NAMES environment variable, the problems - # vanish in a puff of smoke. - if test "X${COLLECT_NAMES+set}" != Xset; then - COLLECT_NAMES= - export COLLECT_NAMES - fi - ;; -esac - -# Global variables: -ofile=libtool -can_build_shared=yes - -# All known linkers require a `.a' archive for static linking (except MSVC, -# which needs '.lib'). -libext=a - -with_gnu_ld="$lt_cv_prog_gnu_ld" - -old_CC="$CC" -old_CFLAGS="$CFLAGS" - -# Set sane defaults for various variables -test -z "$CC" && CC=cc -test -z "$LTCC" && LTCC=$CC -test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS -test -z "$LD" && LD=ld -test -z "$ac_objext" && ac_objext=o - -for cc_temp in $compiler""; do - case $cc_temp in - compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; - distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; - \-*) ;; - *) break;; - esac -done -cc_basename=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"` - - -# Only perform the check for file, if the check method requires it -test -z "$MAGIC_CMD" && MAGIC_CMD=file -case $deplibs_check_method in -file_magic*) - if test "$file_magic_cmd" = '$MAGIC_CMD'; then - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ${ac_tool_prefix}file" >&5 -$as_echo_n "checking for ${ac_tool_prefix}file... " >&6; } -if ${lt_cv_path_MAGIC_CMD+:} false; then : - $as_echo_n "(cached) " >&6 -else - case $MAGIC_CMD in -[\\/*] | ?:[\\/]*) - lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. - ;; -*) - lt_save_MAGIC_CMD="$MAGIC_CMD" - lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR - ac_dummy="/usr/bin$PATH_SEPARATOR$PATH" - for ac_dir in $ac_dummy; do - IFS="$lt_save_ifs" - test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/${ac_tool_prefix}file; then - lt_cv_path_MAGIC_CMD="$ac_dir/${ac_tool_prefix}file" - if test -n "$file_magic_test_file"; then - case $deplibs_check_method in - "file_magic "*) - file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"` - MAGIC_CMD="$lt_cv_path_MAGIC_CMD" - if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | - $EGREP "$file_magic_regex" > /dev/null; then - : - else - cat <<_LT_EOF 1>&2 - -*** Warning: the command libtool uses to detect shared libraries, -*** $file_magic_cmd, produces output that libtool cannot recognize. -*** The result is that libtool may fail to recognize shared libraries -*** as such. This will affect the creation of libtool libraries that -*** depend on shared libraries, but programs linked with such libtool -*** libraries will work regardless of this problem. Nevertheless, you -*** may want to report the problem to your system manager and/or to -*** bug-libtool@gnu.org - -_LT_EOF - fi ;; - esac - fi - break - fi - done - IFS="$lt_save_ifs" - MAGIC_CMD="$lt_save_MAGIC_CMD" - ;; -esac -fi - -MAGIC_CMD="$lt_cv_path_MAGIC_CMD" -if test -n "$MAGIC_CMD"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MAGIC_CMD" >&5 -$as_echo "$MAGIC_CMD" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - - - -if test -z "$lt_cv_path_MAGIC_CMD"; then - if test -n "$ac_tool_prefix"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for file" >&5 -$as_echo_n "checking for file... " >&6; } -if ${lt_cv_path_MAGIC_CMD+:} false; then : - $as_echo_n "(cached) " >&6 -else - case $MAGIC_CMD in -[\\/*] | ?:[\\/]*) - lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. - ;; -*) - lt_save_MAGIC_CMD="$MAGIC_CMD" - lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR - ac_dummy="/usr/bin$PATH_SEPARATOR$PATH" - for ac_dir in $ac_dummy; do - IFS="$lt_save_ifs" - test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/file; then - lt_cv_path_MAGIC_CMD="$ac_dir/file" - if test -n "$file_magic_test_file"; then - case $deplibs_check_method in - "file_magic "*) - file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"` - MAGIC_CMD="$lt_cv_path_MAGIC_CMD" - if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | - $EGREP "$file_magic_regex" > /dev/null; then - : - else - cat <<_LT_EOF 1>&2 - -*** Warning: the command libtool uses to detect shared libraries, -*** $file_magic_cmd, produces output that libtool cannot recognize. -*** The result is that libtool may fail to recognize shared libraries -*** as such. This will affect the creation of libtool libraries that -*** depend on shared libraries, but programs linked with such libtool -*** libraries will work regardless of this problem. Nevertheless, you -*** may want to report the problem to your system manager and/or to -*** bug-libtool@gnu.org - -_LT_EOF - fi ;; - esac - fi - break - fi - done - IFS="$lt_save_ifs" - MAGIC_CMD="$lt_save_MAGIC_CMD" - ;; -esac -fi - -MAGIC_CMD="$lt_cv_path_MAGIC_CMD" -if test -n "$MAGIC_CMD"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MAGIC_CMD" >&5 -$as_echo "$MAGIC_CMD" >&6; } -else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } -fi - - - else - MAGIC_CMD=: - fi -fi - - fi - ;; -esac - -# Use C for the default configuration in the libtool script - -lt_save_CC="$CC" -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - - -# Source file extension for C test sources. -ac_ext=c - -# Object file extension for compiled C test sources. -objext=o -objext=$objext - -# Code to be used in simple compile tests -lt_simple_compile_test_code="int some_variable = 0;" - -# Code to be used in simple link tests -lt_simple_link_test_code='int main(){return(0);}' - - - - - - - -# If no C compiler was specified, use CC. -LTCC=${LTCC-"$CC"} - -# If no C compiler flags were specified, use CFLAGS. -LTCFLAGS=${LTCFLAGS-"$CFLAGS"} - -# Allow CC to be a program name with arguments. -compiler=$CC - -# Save the default compiler, since it gets overwritten when the other -# tags are being tested, and _LT_TAGVAR(compiler, []) is a NOP. -compiler_DEFAULT=$CC - -# save warnings/boilerplate of simple test code -ac_outfile=conftest.$ac_objext -echo "$lt_simple_compile_test_code" >conftest.$ac_ext -eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err -_lt_compiler_boilerplate=`cat conftest.err` -$RM conftest* - -ac_outfile=conftest.$ac_objext -echo "$lt_simple_link_test_code" >conftest.$ac_ext -eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err -_lt_linker_boilerplate=`cat conftest.err` -$RM -r conftest* - - -if test -n "$compiler"; then - -lt_prog_compiler_no_builtin_flag= - -if test "$GCC" = yes; then - case $cc_basename in - nvcc*) - lt_prog_compiler_no_builtin_flag=' -Xcompiler -fno-builtin' ;; - *) - lt_prog_compiler_no_builtin_flag=' -fno-builtin' ;; - esac - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -fno-rtti -fno-exceptions" >&5 -$as_echo_n "checking if $compiler supports -fno-rtti -fno-exceptions... " >&6; } -if ${lt_cv_prog_compiler_rtti_exceptions+:} false; then : - $as_echo_n "(cached) " >&6 -else - lt_cv_prog_compiler_rtti_exceptions=no - ac_outfile=conftest.$ac_objext - echo "$lt_simple_compile_test_code" > conftest.$ac_ext - lt_compiler_flag="-fno-rtti -fno-exceptions" - # Insert the option either (1) after the last *FLAGS variable, or - # (2) before a word containing "conftest.", or (3) at the end. - # Note that $ac_compile itself does not contain backslashes and begins - # with a dollar sign (not a hyphen), so the echo should work correctly. - # The option is referenced via a variable to avoid confusing sed. - lt_compile=`echo "$ac_compile" | $SED \ - -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ - -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ - -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5) - (eval "$lt_compile" 2>conftest.err) - ac_status=$? - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - if (exit $ac_status) && test -s "$ac_outfile"; then - # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings other than the usual output. - $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp - $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 - if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then - lt_cv_prog_compiler_rtti_exceptions=yes - fi - fi - $RM conftest* - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_rtti_exceptions" >&5 -$as_echo "$lt_cv_prog_compiler_rtti_exceptions" >&6; } - -if test x"$lt_cv_prog_compiler_rtti_exceptions" = xyes; then - lt_prog_compiler_no_builtin_flag="$lt_prog_compiler_no_builtin_flag -fno-rtti -fno-exceptions" -else - : -fi - -fi - - - - - - - lt_prog_compiler_wl= -lt_prog_compiler_pic= -lt_prog_compiler_static= - - - if test "$GCC" = yes; then - lt_prog_compiler_wl='-Wl,' - lt_prog_compiler_static='-static' - - case $host_os in - aix*) - # All AIX code is PIC. - if test "$host_cpu" = ia64; then - # AIX 5 now supports IA64 processor - lt_prog_compiler_static='-Bstatic' - fi - ;; - - amigaos*) - case $host_cpu in - powerpc) - # see comment about AmigaOS4 .so support - lt_prog_compiler_pic='-fPIC' - ;; - m68k) - # FIXME: we need at least 68020 code to build shared libraries, but - # adding the `-m68020' flag to GCC prevents building anything better, - # like `-m68040'. - lt_prog_compiler_pic='-m68020 -resident32 -malways-restore-a4' - ;; - esac - ;; - - beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) - # PIC is the default for these OSes. - ;; - - mingw* | cygwin* | pw32* | os2* | cegcc*) - # This hack is so that the source file can tell whether it is being - # built for inclusion in a dll (and should export symbols for example). - # Although the cygwin gcc ignores -fPIC, still need this for old-style - # (--disable-auto-import) libraries - lt_prog_compiler_pic='-DDLL_EXPORT' - ;; - - darwin* | rhapsody*) - # PIC is the default on this platform - # Common symbols not allowed in MH_DYLIB files - lt_prog_compiler_pic='-fno-common' - ;; - - haiku*) - # PIC is the default for Haiku. - # The "-static" flag exists, but is broken. - lt_prog_compiler_static= - ;; - - hpux*) - # PIC is the default for 64-bit PA HP-UX, but not for 32-bit - # PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag - # sets the default TLS model and affects inlining. - case $host_cpu in - hppa*64*) - # +Z the default - ;; - *) - lt_prog_compiler_pic='-fPIC' - ;; - esac - ;; - - interix[3-9]*) - # Interix 3.x gcc -fpic/-fPIC options generate broken code. - # Instead, we relocate shared libraries at runtime. - ;; - - msdosdjgpp*) - # Just because we use GCC doesn't mean we suddenly get shared libraries - # on systems that don't support them. - lt_prog_compiler_can_build_shared=no - enable_shared=no - ;; - - *nto* | *qnx*) - # QNX uses GNU C++, but need to define -shared option too, otherwise - # it will coredump. - lt_prog_compiler_pic='-fPIC -shared' - ;; - - sysv4*MP*) - if test -d /usr/nec; then - lt_prog_compiler_pic=-Kconform_pic - fi - ;; - - *) - lt_prog_compiler_pic='-fPIC' - ;; - esac - - case $cc_basename in - nvcc*) # Cuda Compiler Driver 2.2 - lt_prog_compiler_wl='-Xlinker ' - lt_prog_compiler_pic='-Xcompiler -fPIC' - ;; - esac - else - # PORTME Check for flag to pass linker flags through the system compiler. - case $host_os in - aix*) - lt_prog_compiler_wl='-Wl,' - if test "$host_cpu" = ia64; then - # AIX 5 now supports IA64 processor - lt_prog_compiler_static='-Bstatic' - else - lt_prog_compiler_static='-bnso -bI:/lib/syscalls.exp' - fi - ;; - - mingw* | cygwin* | pw32* | os2* | cegcc*) - # This hack is so that the source file can tell whether it is being - # built for inclusion in a dll (and should export symbols for example). - lt_prog_compiler_pic='-DDLL_EXPORT' - ;; - - hpux9* | hpux10* | hpux11*) - lt_prog_compiler_wl='-Wl,' - # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but - # not for PA HP-UX. - case $host_cpu in - hppa*64*|ia64*) - # +Z the default - ;; - *) - lt_prog_compiler_pic='+Z' - ;; - esac - # Is there a better lt_prog_compiler_static that works with the bundled CC? - lt_prog_compiler_static='${wl}-a ${wl}archive' - ;; - - irix5* | irix6* | nonstopux*) - lt_prog_compiler_wl='-Wl,' - # PIC (with -KPIC) is the default. - lt_prog_compiler_static='-non_shared' - ;; - - linux* | k*bsd*-gnu | kopensolaris*-gnu) - case $cc_basename in - # old Intel for x86_64 which still supported -KPIC. - ecc*) - lt_prog_compiler_wl='-Wl,' - lt_prog_compiler_pic='-KPIC' - lt_prog_compiler_static='-static' - ;; - # icc used to be incompatible with GCC. - # ICC 10 doesn't accept -KPIC any more. - icc* | ifort*) - lt_prog_compiler_wl='-Wl,' - lt_prog_compiler_pic='-fPIC' - lt_prog_compiler_static='-static' - ;; - # Lahey Fortran 8.1. - lf95*) - lt_prog_compiler_wl='-Wl,' - lt_prog_compiler_pic='--shared' - lt_prog_compiler_static='--static' - ;; - nagfor*) - # NAG Fortran compiler - lt_prog_compiler_wl='-Wl,-Wl,,' - lt_prog_compiler_pic='-PIC' - lt_prog_compiler_static='-Bstatic' - ;; - pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*) - # Portland Group compilers (*not* the Pentium gcc compiler, - # which looks to be a dead project) - lt_prog_compiler_wl='-Wl,' - lt_prog_compiler_pic='-fpic' - lt_prog_compiler_static='-Bstatic' - ;; - ccc*) - lt_prog_compiler_wl='-Wl,' - # All Alpha code is PIC. - lt_prog_compiler_static='-non_shared' - ;; - xl* | bgxl* | bgf* | mpixl*) - # IBM XL C 8.0/Fortran 10.1, 11.1 on PPC and BlueGene - lt_prog_compiler_wl='-Wl,' - lt_prog_compiler_pic='-qpic' - lt_prog_compiler_static='-qstaticlink' - ;; - *) - case `$CC -V 2>&1 | sed 5q` in - *Sun\ F* | *Sun*Fortran*) - # Sun Fortran 8.3 passes all unrecognized flags to the linker - lt_prog_compiler_pic='-KPIC' - lt_prog_compiler_static='-Bstatic' - lt_prog_compiler_wl='' - ;; - *Sun\ C*) - # Sun C 5.9 - lt_prog_compiler_pic='-KPIC' - lt_prog_compiler_static='-Bstatic' - lt_prog_compiler_wl='-Wl,' - ;; - esac - ;; - esac - ;; - - newsos6) - lt_prog_compiler_pic='-KPIC' - lt_prog_compiler_static='-Bstatic' - ;; - - *nto* | *qnx*) - # QNX uses GNU C++, but need to define -shared option too, otherwise - # it will coredump. - lt_prog_compiler_pic='-fPIC -shared' - ;; - - osf3* | osf4* | osf5*) - lt_prog_compiler_wl='-Wl,' - # All OSF/1 code is PIC. - lt_prog_compiler_static='-non_shared' - ;; - - rdos*) - lt_prog_compiler_static='-non_shared' - ;; - - solaris*) - lt_prog_compiler_pic='-KPIC' - lt_prog_compiler_static='-Bstatic' - case $cc_basename in - f77* | f90* | f95* | sunf77* | sunf90* | sunf95*) - lt_prog_compiler_wl='-Qoption ld ';; - *) - lt_prog_compiler_wl='-Wl,';; - esac - ;; - - sunos4*) - lt_prog_compiler_wl='-Qoption ld ' - lt_prog_compiler_pic='-PIC' - lt_prog_compiler_static='-Bstatic' - ;; - - sysv4 | sysv4.2uw2* | sysv4.3*) - lt_prog_compiler_wl='-Wl,' - lt_prog_compiler_pic='-KPIC' - lt_prog_compiler_static='-Bstatic' - ;; - - sysv4*MP*) - if test -d /usr/nec ;then - lt_prog_compiler_pic='-Kconform_pic' - lt_prog_compiler_static='-Bstatic' - fi - ;; - - sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) - lt_prog_compiler_wl='-Wl,' - lt_prog_compiler_pic='-KPIC' - lt_prog_compiler_static='-Bstatic' - ;; - - unicos*) - lt_prog_compiler_wl='-Wl,' - lt_prog_compiler_can_build_shared=no - ;; - - uts4*) - lt_prog_compiler_pic='-pic' - lt_prog_compiler_static='-Bstatic' - ;; - - *) - lt_prog_compiler_can_build_shared=no - ;; - esac - fi - -case $host_os in - # For platforms which do not support PIC, -DPIC is meaningless: - *djgpp*) - lt_prog_compiler_pic= - ;; - *) - lt_prog_compiler_pic="$lt_prog_compiler_pic@&t@ -DPIC" - ;; -esac - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $compiler option to produce PIC" >&5 -$as_echo_n "checking for $compiler option to produce PIC... " >&6; } -if ${lt_cv_prog_compiler_pic+:} false; then : - $as_echo_n "(cached) " >&6 -else - lt_cv_prog_compiler_pic=$lt_prog_compiler_pic -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic" >&5 -$as_echo "$lt_cv_prog_compiler_pic" >&6; } -lt_prog_compiler_pic=$lt_cv_prog_compiler_pic - -# -# Check to make sure the PIC flag actually works. -# -if test -n "$lt_prog_compiler_pic"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler PIC flag $lt_prog_compiler_pic works" >&5 -$as_echo_n "checking if $compiler PIC flag $lt_prog_compiler_pic works... " >&6; } -if ${lt_cv_prog_compiler_pic_works+:} false; then : - $as_echo_n "(cached) " >&6 -else - lt_cv_prog_compiler_pic_works=no - ac_outfile=conftest.$ac_objext - echo "$lt_simple_compile_test_code" > conftest.$ac_ext - lt_compiler_flag="$lt_prog_compiler_pic@&t@ -DPIC" - # Insert the option either (1) after the last *FLAGS variable, or - # (2) before a word containing "conftest.", or (3) at the end. - # Note that $ac_compile itself does not contain backslashes and begins - # with a dollar sign (not a hyphen), so the echo should work correctly. - # The option is referenced via a variable to avoid confusing sed. - lt_compile=`echo "$ac_compile" | $SED \ - -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ - -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ - -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5) - (eval "$lt_compile" 2>conftest.err) - ac_status=$? - cat conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - if (exit $ac_status) && test -s "$ac_outfile"; then - # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings other than the usual output. - $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp - $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 - if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then - lt_cv_prog_compiler_pic_works=yes - fi - fi - $RM conftest* - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic_works" >&5 -$as_echo "$lt_cv_prog_compiler_pic_works" >&6; } - -if test x"$lt_cv_prog_compiler_pic_works" = xyes; then - case $lt_prog_compiler_pic in - "" | " "*) ;; - *) lt_prog_compiler_pic=" $lt_prog_compiler_pic" ;; - esac -else - lt_prog_compiler_pic= - lt_prog_compiler_can_build_shared=no -fi - -fi - - - - - - - - - - - -# -# Check to make sure the static flag actually works. -# -wl=$lt_prog_compiler_wl eval lt_tmp_static_flag=\"$lt_prog_compiler_static\" -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler static flag $lt_tmp_static_flag works" >&5 -$as_echo_n "checking if $compiler static flag $lt_tmp_static_flag works... " >&6; } -if ${lt_cv_prog_compiler_static_works+:} false; then : - $as_echo_n "(cached) " >&6 -else - lt_cv_prog_compiler_static_works=no - save_LDFLAGS="$LDFLAGS" - LDFLAGS="$LDFLAGS $lt_tmp_static_flag" - echo "$lt_simple_link_test_code" > conftest.$ac_ext - if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then - # The linker can only warn and ignore the option if not recognized - # So say no if there are warnings - if test -s conftest.err; then - # Append any errors to the config.log. - cat conftest.err 1>&5 - $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp - $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 - if diff conftest.exp conftest.er2 >/dev/null; then - lt_cv_prog_compiler_static_works=yes - fi - else - lt_cv_prog_compiler_static_works=yes - fi - fi - $RM -r conftest* - LDFLAGS="$save_LDFLAGS" - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_static_works" >&5 -$as_echo "$lt_cv_prog_compiler_static_works" >&6; } - -if test x"$lt_cv_prog_compiler_static_works" = xyes; then - : -else - lt_prog_compiler_static= -fi - - - - - - - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5 -$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; } -if ${lt_cv_prog_compiler_c_o+:} false; then : - $as_echo_n "(cached) " >&6 -else - lt_cv_prog_compiler_c_o=no - $RM -r conftest 2>/dev/null - mkdir conftest - cd conftest - mkdir out - echo "$lt_simple_compile_test_code" > conftest.$ac_ext - - lt_compiler_flag="-o out/conftest2.$ac_objext" - # Insert the option either (1) after the last *FLAGS variable, or - # (2) before a word containing "conftest.", or (3) at the end. - # Note that $ac_compile itself does not contain backslashes and begins - # with a dollar sign (not a hyphen), so the echo should work correctly. - lt_compile=`echo "$ac_compile" | $SED \ - -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ - -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ - -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5) - (eval "$lt_compile" 2>out/conftest.err) - ac_status=$? - cat out/conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - if (exit $ac_status) && test -s out/conftest2.$ac_objext - then - # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings - $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp - $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 - if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then - lt_cv_prog_compiler_c_o=yes - fi - fi - chmod u+w . 2>&5 - $RM conftest* - # SGI C++ compiler will create directory out/ii_files/ for - # template instantiation - test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files - $RM out/* && rmdir out - cd .. - $RM -r conftest - $RM conftest* - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o" >&5 -$as_echo "$lt_cv_prog_compiler_c_o" >&6; } - - - - - - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5 -$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; } -if ${lt_cv_prog_compiler_c_o+:} false; then : - $as_echo_n "(cached) " >&6 -else - lt_cv_prog_compiler_c_o=no - $RM -r conftest 2>/dev/null - mkdir conftest - cd conftest - mkdir out - echo "$lt_simple_compile_test_code" > conftest.$ac_ext - - lt_compiler_flag="-o out/conftest2.$ac_objext" - # Insert the option either (1) after the last *FLAGS variable, or - # (2) before a word containing "conftest.", or (3) at the end. - # Note that $ac_compile itself does not contain backslashes and begins - # with a dollar sign (not a hyphen), so the echo should work correctly. - lt_compile=`echo "$ac_compile" | $SED \ - -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ - -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ - -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5) - (eval "$lt_compile" 2>out/conftest.err) - ac_status=$? - cat out/conftest.err >&5 - echo "$as_me:$LINENO: \$? = $ac_status" >&5 - if (exit $ac_status) && test -s out/conftest2.$ac_objext - then - # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings - $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp - $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 - if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then - lt_cv_prog_compiler_c_o=yes - fi - fi - chmod u+w . 2>&5 - $RM conftest* - # SGI C++ compiler will create directory out/ii_files/ for - # template instantiation - test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files - $RM out/* && rmdir out - cd .. - $RM -r conftest - $RM conftest* - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o" >&5 -$as_echo "$lt_cv_prog_compiler_c_o" >&6; } - - - - -hard_links="nottested" -if test "$lt_cv_prog_compiler_c_o" = no && test "$need_locks" != no; then - # do not overwrite the value of need_locks provided by the user - { $as_echo "$as_me:${as_lineno-$LINENO}: checking if we can lock with hard links" >&5 -$as_echo_n "checking if we can lock with hard links... " >&6; } - hard_links=yes - $RM conftest* - ln conftest.a conftest.b 2>/dev/null && hard_links=no - touch conftest.a - ln conftest.a conftest.b 2>&5 || hard_links=no - ln conftest.a conftest.b 2>/dev/null && hard_links=no - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $hard_links" >&5 -$as_echo "$hard_links" >&6; } - if test "$hard_links" = no; then - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5 -$as_echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;} - need_locks=warn - fi -else - need_locks=no -fi - - - - - - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $compiler linker ($LD) supports shared libraries" >&5 -$as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; } - - runpath_var= - allow_undefined_flag= - always_export_symbols=no - archive_cmds= - archive_expsym_cmds= - compiler_needs_object=no - enable_shared_with_static_runtimes=no - export_dynamic_flag_spec= - export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' - hardcode_automatic=no - hardcode_direct=no - hardcode_direct_absolute=no - hardcode_libdir_flag_spec= - hardcode_libdir_flag_spec_ld= - hardcode_libdir_separator= - hardcode_minus_L=no - hardcode_shlibpath_var=unsupported - inherit_rpath=no - link_all_deplibs=unknown - module_cmds= - module_expsym_cmds= - old_archive_from_new_cmds= - old_archive_from_expsyms_cmds= - thread_safe_flag_spec= - whole_archive_flag_spec= - # include_expsyms should be a list of space-separated symbols to be *always* - # included in the symbol list - include_expsyms= - # exclude_expsyms can be an extended regexp of symbols to exclude - # it will be wrapped by ` (' and `)$', so one must not match beginning or - # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc', - # as well as any symbol that contains `d'. - exclude_expsyms='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*' - # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out - # platforms (ab)use it in PIC code, but their linkers get confused if - # the symbol is explicitly referenced. Since portable code cannot - # rely on this symbol name, it's probably fine to never include it in - # preloaded symbol tables. - # Exclude shared library initialization/finalization symbols. - extract_expsyms_cmds= - - case $host_os in - cygwin* | mingw* | pw32* | cegcc*) - # FIXME: the MSVC++ port hasn't been tested in a loooong time - # When not using gcc, we currently assume that we are using - # Microsoft Visual C++. - if test "$GCC" != yes; then - with_gnu_ld=no - fi - ;; - interix*) - # we just hope/assume this is gcc and not c89 (= MSVC++) - with_gnu_ld=yes - ;; - openbsd*) - with_gnu_ld=no - ;; - linux* | k*bsd*-gnu | gnu*) - link_all_deplibs=no - ;; - esac - - ld_shlibs=yes - - # On some targets, GNU ld is compatible enough with the native linker - # that we're better off using the native interface for both. - lt_use_gnu_ld_interface=no - if test "$with_gnu_ld" = yes; then - case $host_os in - aix*) - # The AIX port of GNU ld has always aspired to compatibility - # with the native linker. However, as the warning in the GNU ld - # block says, versions before 2.19.5* couldn't really create working - # shared libraries, regardless of the interface used. - case `$LD -v 2>&1` in - *\ \(GNU\ Binutils\)\ 2.19.5*) ;; - *\ \(GNU\ Binutils\)\ 2.[2-9]*) ;; - *\ \(GNU\ Binutils\)\ [3-9]*) ;; - *) - lt_use_gnu_ld_interface=yes - ;; - esac - ;; - *) - lt_use_gnu_ld_interface=yes - ;; - esac - fi - - if test "$lt_use_gnu_ld_interface" = yes; then - # If archive_cmds runs LD, not CC, wlarc should be empty - wlarc='${wl}' - - # Set some defaults for GNU ld with shared library support. These - # are reset later if shared libraries are not supported. Putting them - # here allows them to be overridden if necessary. - runpath_var=LD_RUN_PATH - hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' - export_dynamic_flag_spec='${wl}--export-dynamic' - # ancient GNU ld didn't support --whole-archive et. al. - if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then - whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' - else - whole_archive_flag_spec= - fi - supports_anon_versioning=no - case `$LD -v 2>&1` in - *GNU\ gold*) supports_anon_versioning=yes ;; - *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11 - *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... - *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ... - *\ 2.11.*) ;; # other 2.11 versions - *) supports_anon_versioning=yes ;; - esac - - # See if GNU ld supports shared libraries. - case $host_os in - aix[3-9]*) - # On AIX/PPC, the GNU linker is very broken - if test "$host_cpu" != ia64; then - ld_shlibs=no - cat <<_LT_EOF 1>&2 - -*** Warning: the GNU linker, at least up to release 2.19, is reported -*** to be unable to reliably create shared libraries on AIX. -*** Therefore, libtool is disabling shared libraries support. If you -*** really care for shared libraries, you may want to install binutils -*** 2.20 or above, or modify your PATH so that a non-GNU linker is found. -*** You will then need to restart the configuration process. - -_LT_EOF - fi - ;; - - amigaos*) - case $host_cpu in - powerpc) - # see comment about AmigaOS4 .so support - archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - archive_expsym_cmds='' - ;; - m68k) - archive_cmds='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' - hardcode_libdir_flag_spec='-L$libdir' - hardcode_minus_L=yes - ;; - esac - ;; - - beos*) - if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then - allow_undefined_flag=unsupported - # Joseph Beckenbach says some releases of gcc - # support --undefined. This deserves some investigation. FIXME - archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - else - ld_shlibs=no - fi - ;; - - cygwin* | mingw* | pw32* | cegcc*) - # _LT_TAGVAR(hardcode_libdir_flag_spec, ) is actually meaningless, - # as there is no search path for DLLs. - hardcode_libdir_flag_spec='-L$libdir' - export_dynamic_flag_spec='${wl}--export-all-symbols' - allow_undefined_flag=unsupported - always_export_symbols=no - enable_shared_with_static_runtimes=yes - export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/;s/^.*[ ]__nm__\([^ ]*\)[ ][^ ]*/\1 DATA/;/^I[ ]/d;/^[AITW][ ]/s/.* //'\'' | sort | uniq > $export_symbols' - exclude_expsyms='[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname' - - if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then - archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' - # If the export-symbols file already is a .def file (1st line - # is EXPORTS), use it as is; otherwise, prepend... - archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then - cp $export_symbols $output_objdir/$soname.def; - else - echo EXPORTS > $output_objdir/$soname.def; - cat $export_symbols >> $output_objdir/$soname.def; - fi~ - $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' - else - ld_shlibs=no - fi - ;; - - haiku*) - archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - link_all_deplibs=yes - ;; - - interix[3-9]*) - hardcode_direct=no - hardcode_shlibpath_var=no - hardcode_libdir_flag_spec='${wl}-rpath,$libdir' - export_dynamic_flag_spec='${wl}-E' - # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. - # Instead, shared libraries are loaded at an image base (0x10000000 by - # default) and relocated if they conflict, which is a slow very memory - # consuming and fragmenting process. To avoid this, we pick a random, - # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link - # time. Moving up from 0x10000000 also allows more sbrk(2) space. - archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' - archive_expsym_cmds='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' - ;; - - gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu) - tmp_diet=no - if test "$host_os" = linux-dietlibc; then - case $cc_basename in - diet\ *) tmp_diet=yes;; # linux-dietlibc with static linking (!diet-dyn) - esac - fi - if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \ - && test "$tmp_diet" = no - then - tmp_addflag=' $pic_flag' - tmp_sharedflag='-shared' - case $cc_basename,$host_cpu in - pgcc*) # Portland Group C compiler - whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' - tmp_addflag=' $pic_flag' - ;; - pgf77* | pgf90* | pgf95* | pgfortran*) - # Portland Group f77 and f90 compilers - whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' - tmp_addflag=' $pic_flag -Mnomain' ;; - ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64 - tmp_addflag=' -i_dynamic' ;; - efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64 - tmp_addflag=' -i_dynamic -nofor_main' ;; - ifc* | ifort*) # Intel Fortran compiler - tmp_addflag=' -nofor_main' ;; - lf95*) # Lahey Fortran 8.1 - whole_archive_flag_spec= - tmp_sharedflag='--shared' ;; - xl[cC]* | bgxl[cC]* | mpixl[cC]*) # IBM XL C 8.0 on PPC (deal with xlf below) - tmp_sharedflag='-qmkshrobj' - tmp_addflag= ;; - nvcc*) # Cuda Compiler Driver 2.2 - whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' - compiler_needs_object=yes - ;; - esac - case `$CC -V 2>&1 | sed 5q` in - *Sun\ C*) # Sun C 5.9 - whole_archive_flag_spec='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' - compiler_needs_object=yes - tmp_sharedflag='-G' ;; - *Sun\ F*) # Sun Fortran 8.3 - tmp_sharedflag='-G' ;; - esac - archive_cmds='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - - if test "x$supports_anon_versioning" = xyes; then - archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~ - cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ - echo "local: *; };" >> $output_objdir/$libname.ver~ - $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' - fi - - case $cc_basename in - xlf* | bgf* | bgxlf* | mpixlf*) - # IBM XL Fortran 10.1 on PPC cannot create shared libs itself - whole_archive_flag_spec='--whole-archive$convenience --no-whole-archive' - hardcode_libdir_flag_spec= - hardcode_libdir_flag_spec_ld='-rpath $libdir' - archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname -o $lib' - if test "x$supports_anon_versioning" = xyes; then - archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~ - cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ - echo "local: *; };" >> $output_objdir/$libname.ver~ - $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib' - fi - ;; - esac - else - ld_shlibs=no - fi - ;; - - netbsd* | netbsdelf*-gnu) - if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then - archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' - wlarc= - else - archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - fi - ;; - - solaris*) - if $LD -v 2>&1 | $GREP 'BFD 2\.8' > /dev/null; then - ld_shlibs=no - cat <<_LT_EOF 1>&2 - -*** Warning: The releases 2.8.* of the GNU linker cannot reliably -*** create shared libraries on Solaris systems. Therefore, libtool -*** is disabling shared libraries support. We urge you to upgrade GNU -*** binutils to release 2.9.1 or newer. Another option is to modify -*** your PATH or compiler configuration so that the native linker is -*** used, and then restart. - -_LT_EOF - elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then - archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - else - ld_shlibs=no - fi - ;; - - sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*) - case `$LD -v 2>&1` in - *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*) - ld_shlibs=no - cat <<_LT_EOF 1>&2 - -*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not -*** reliably create shared libraries on SCO systems. Therefore, libtool -*** is disabling shared libraries support. We urge you to upgrade GNU -*** binutils to release 2.16.91.0.3 or newer. Another option is to modify -*** your PATH or compiler configuration so that the native linker is -*** used, and then restart. - -_LT_EOF - ;; - *) - # For security reasons, it is highly recommended that you always - # use absolute paths for naming shared libraries, and exclude the - # DT_RUNPATH tag from executables and libraries. But doing so - # requires that you compile everything twice, which is a pain. - if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then - hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' - archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - else - ld_shlibs=no - fi - ;; - esac - ;; - - sunos4*) - archive_cmds='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' - wlarc= - hardcode_direct=yes - hardcode_shlibpath_var=no - ;; - - *) - if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then - archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' - else - ld_shlibs=no - fi - ;; - esac - - if test "$ld_shlibs" = no; then - runpath_var= - hardcode_libdir_flag_spec= - export_dynamic_flag_spec= - whole_archive_flag_spec= - fi - else - # PORTME fill in a description of your system's linker (not GNU ld) - case $host_os in - aix3*) - allow_undefined_flag=unsupported - always_export_symbols=yes - archive_expsym_cmds='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname' - # Note: this linker hardcodes the directories in LIBPATH if there - # are no directories specified by -L. - hardcode_minus_L=yes - if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then - # Neither direct hardcoding nor static linking is supported with a - # broken collect2. - hardcode_direct=unsupported - fi - ;; - - aix[4-9]*) - if test "$host_cpu" = ia64; then - # On IA64, the linker does run time linking by default, so we don't - # have to do anything special. - aix_use_runtimelinking=no - exp_sym_flag='-Bexport' - no_entry_flag="" - else - # If we're using GNU nm, then we don't want the "-C" option. - # -C means demangle to AIX nm, but means don't demangle with GNU nm - # Also, AIX nm treats weak defined symbols like other global - # defined symbols, whereas GNU nm marks them as "W". - if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then - export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' - else - export_symbols_cmds='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' - fi - aix_use_runtimelinking=no - - # Test if we are trying to use run time linking or normal - # AIX style linking. If -brtl is somewhere in LDFLAGS, we - # need to do runtime linking. - case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*) - for ld_flag in $LDFLAGS; do - if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then - aix_use_runtimelinking=yes - break - fi - done - ;; - esac - - exp_sym_flag='-bexport' - no_entry_flag='-bnoentry' - fi - - # When large executables or shared objects are built, AIX ld can - # have problems creating the table of contents. If linking a library - # or program results in "error TOC overflow" add -mminimal-toc to - # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not - # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. - - archive_cmds='' - hardcode_direct=yes - hardcode_direct_absolute=yes - hardcode_libdir_separator=':' - link_all_deplibs=yes - file_list_spec='${wl}-f,' - - if test "$GCC" = yes; then - case $host_os in aix4.[012]|aix4.[012].*) - # We only want to do this on AIX 4.2 and lower, the check - # below for broken collect2 doesn't work under 4.3+ - collect2name=`${CC} -print-prog-name=collect2` - if test -f "$collect2name" && - strings "$collect2name" | $GREP resolve_lib_name >/dev/null - then - # We have reworked collect2 - : - else - # We have old collect2 - hardcode_direct=unsupported - # It fails to find uninstalled libraries when the uninstalled - # path is not listed in the libpath. Setting hardcode_minus_L - # to unsupported forces relinking - hardcode_minus_L=yes - hardcode_libdir_flag_spec='-L$libdir' - hardcode_libdir_separator= - fi - ;; - esac - shared_flag='-shared' - if test "$aix_use_runtimelinking" = yes; then - shared_flag="$shared_flag "'${wl}-G' - fi - link_all_deplibs=no - else - # not using gcc - if test "$host_cpu" = ia64; then - # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release - # chokes on -Wl,-G. The following line is correct: - shared_flag='-G' - else - if test "$aix_use_runtimelinking" = yes; then - shared_flag='${wl}-G' - else - shared_flag='${wl}-bM:SRE' - fi - fi - fi - - export_dynamic_flag_spec='${wl}-bexpall' - # It seems that -bexpall does not export symbols beginning with - # underscore (_), so it is better to generate a list of symbols to export. - always_export_symbols=yes - if test "$aix_use_runtimelinking" = yes; then - # Warning - without using the other runtime loading flags (-brtl), - # -berok will link without error, but may produce a broken library. - allow_undefined_flag='-berok' - # Determine the default libpath from the value encoded in an - # empty executable. - if test "${lt_cv_aix_libpath+set}" = set; then - aix_libpath=$lt_cv_aix_libpath -else - if ${lt_cv_aix_libpath_+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - - lt_aix_libpath_sed=' - /Import File Strings/,/^$/ { - /^0/ { - s/^0 *\([^ ]*\) *$/\1/ - p - } - }' - lt_cv_aix_libpath_=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` - # Check for a 64-bit object if we didn't find anything. - if test -z "$lt_cv_aix_libpath_"; then - lt_cv_aix_libpath_=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` - fi -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext - if test -z "$lt_cv_aix_libpath_"; then - lt_cv_aix_libpath_="/usr/lib:/lib" - fi - -fi - - aix_libpath=$lt_cv_aix_libpath_ -fi - - hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath" - archive_expsym_cmds='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" - else - if test "$host_cpu" = ia64; then - hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib' - allow_undefined_flag="-z nodefs" - archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" - else - # Determine the default libpath from the value encoded in an - # empty executable. - if test "${lt_cv_aix_libpath+set}" = set; then - aix_libpath=$lt_cv_aix_libpath -else - if ${lt_cv_aix_libpath_+:} false; then : - $as_echo_n "(cached) " >&6 -else - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - - lt_aix_libpath_sed=' - /Import File Strings/,/^$/ { - /^0/ { - s/^0 *\([^ ]*\) *$/\1/ - p - } - }' - lt_cv_aix_libpath_=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` - # Check for a 64-bit object if we didn't find anything. - if test -z "$lt_cv_aix_libpath_"; then - lt_cv_aix_libpath_=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` - fi -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext - if test -z "$lt_cv_aix_libpath_"; then - lt_cv_aix_libpath_="/usr/lib:/lib" - fi - -fi - - aix_libpath=$lt_cv_aix_libpath_ -fi - - hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath" - # Warning - without using the other run time loading flags, - # -berok will link without error, but may produce a broken library. - no_undefined_flag=' ${wl}-bernotok' - allow_undefined_flag=' ${wl}-berok' - if test "$with_gnu_ld" = yes; then - # We only use this code for GNU lds that support --whole-archive. - whole_archive_flag_spec='${wl}--whole-archive$convenience ${wl}--no-whole-archive' - else - # Exported symbols can be pulled into shared objects from archives - whole_archive_flag_spec='$convenience' - fi - archive_cmds_need_lc=yes - # This is similar to how AIX traditionally builds its shared libraries. - archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' - fi - fi - ;; - - amigaos*) - case $host_cpu in - powerpc) - # see comment about AmigaOS4 .so support - archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' - archive_expsym_cmds='' - ;; - m68k) - archive_cmds='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' - hardcode_libdir_flag_spec='-L$libdir' - hardcode_minus_L=yes - ;; - esac - ;; - - bsdi[45]*) - export_dynamic_flag_spec=-rdynamic - ;; - - cygwin* | mingw* | pw32* | cegcc*) - # When not using gcc, we currently assume that we are using - # Microsoft Visual C++. - # hardcode_libdir_flag_spec is actually meaningless, as there is - # no search path for DLLs. - case $cc_basename in - cl*) - # Native MSVC - hardcode_libdir_flag_spec=' ' - allow_undefined_flag=unsupported - always_export_symbols=yes - file_list_spec='@' - # Tell ltmain to make .lib files, not .a files. - libext=lib - # Tell ltmain to make .dll files, not .so files. - shrext_cmds=".dll" - # FIXME: Setting linknames here is a bad hack. - archive_cmds='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames=' - archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then - sed -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp; - else - sed -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp; - fi~ - $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~ - linknames=' - # The linker will not automatically build a static lib if we build a DLL. - # _LT_TAGVAR(old_archive_from_new_cmds, )='true' - enable_shared_with_static_runtimes=yes - export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1,DATA/'\'' | $SED -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols' - # Don't use ranlib - old_postinstall_cmds='chmod 644 $oldlib' - postlink_cmds='lt_outputfile="@OUTPUT@"~ - lt_tool_outputfile="@TOOL_OUTPUT@"~ - case $lt_outputfile in - *.exe|*.EXE) ;; - *) - lt_outputfile="$lt_outputfile.exe" - lt_tool_outputfile="$lt_tool_outputfile.exe" - ;; - esac~ - if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then - $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1; - $RM "$lt_outputfile.manifest"; - fi' - ;; - *) - # Assume MSVC wrapper - hardcode_libdir_flag_spec=' ' - allow_undefined_flag=unsupported - # Tell ltmain to make .lib files, not .a files. - libext=lib - # Tell ltmain to make .dll files, not .so files. - shrext_cmds=".dll" - # FIXME: Setting linknames here is a bad hack. - archive_cmds='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames=' - # The linker will automatically build a .lib file if we build a DLL. - old_archive_from_new_cmds='true' - # FIXME: Should let the user specify the lib program. - old_archive_cmds='lib -OUT:$oldlib$oldobjs$old_deplibs' - enable_shared_with_static_runtimes=yes - ;; - esac - ;; - - darwin* | rhapsody*) - - - archive_cmds_need_lc=no - hardcode_direct=no - hardcode_automatic=yes - hardcode_shlibpath_var=unsupported - if test "$lt_cv_ld_force_load" = "yes"; then - whole_archive_flag_spec='`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience ${wl}-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`' - else - whole_archive_flag_spec='' - fi - link_all_deplibs=yes - allow_undefined_flag="$_lt_dar_allow_undefined" - case $cc_basename in - ifort*) _lt_dar_can_shared=yes ;; - *) _lt_dar_can_shared=$GCC ;; - esac - if test "$_lt_dar_can_shared" = "yes"; then - output_verbose_link_cmd=func_echo_all - archive_cmds="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}" - module_cmds="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}" - archive_expsym_cmds="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}" - module_expsym_cmds="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}" - - else - ld_shlibs=no - fi - - ;; - - dgux*) - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_libdir_flag_spec='-L$libdir' - hardcode_shlibpath_var=no - ;; - - freebsd1*) - ld_shlibs=no - ;; - - # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor - # support. Future versions do this automatically, but an explicit c++rt0.o - # does not break anything, and helps significantly (at the cost of a little - # extra space). - freebsd2.2*) - archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o' - hardcode_libdir_flag_spec='-R$libdir' - hardcode_direct=yes - hardcode_shlibpath_var=no - ;; - - # Unfortunately, older versions of FreeBSD 2 do not have this feature. - freebsd2*) - archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' - hardcode_direct=yes - hardcode_minus_L=yes - hardcode_shlibpath_var=no - ;; - - # FreeBSD 3 and greater uses gcc -shared to do shared libraries. - freebsd* | dragonfly*) - archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' - hardcode_libdir_flag_spec='-R$libdir' - hardcode_direct=yes - hardcode_shlibpath_var=no - ;; - - hpux9*) - if test "$GCC" = yes; then - archive_cmds='$RM $output_objdir/$soname~$CC -shared $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' - else - archive_cmds='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' - fi - hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' - hardcode_libdir_separator=: - hardcode_direct=yes - - # hardcode_minus_L: Not really in the search PATH, - # but as the default location of the library. - hardcode_minus_L=yes - export_dynamic_flag_spec='${wl}-E' - ;; - - hpux10*) - if test "$GCC" = yes && test "$with_gnu_ld" = no; then - archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' - else - archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' - fi - if test "$with_gnu_ld" = no; then - hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' - hardcode_libdir_flag_spec_ld='+b $libdir' - hardcode_libdir_separator=: - hardcode_direct=yes - hardcode_direct_absolute=yes - export_dynamic_flag_spec='${wl}-E' - # hardcode_minus_L: Not really in the search PATH, - # but as the default location of the library. - hardcode_minus_L=yes - fi - ;; - - hpux11*) - if test "$GCC" = yes && test "$with_gnu_ld" = no; then - case $host_cpu in - hppa*64*) - archive_cmds='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' - ;; - ia64*) - archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' - ;; - *) - archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' - ;; - esac - else - case $host_cpu in - hppa*64*) - archive_cmds='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' - ;; - ia64*) - archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' - ;; - *) - - # Older versions of the 11.00 compiler do not understand -b yet - # (HP92453-01 A.11.01.20 doesn't, HP92453-01 B.11.X.35175-35176.GP does) - { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC understands -b" >&5 -$as_echo_n "checking if $CC understands -b... " >&6; } -if ${lt_cv_prog_compiler__b+:} false; then : - $as_echo_n "(cached) " >&6 -else - lt_cv_prog_compiler__b=no - save_LDFLAGS="$LDFLAGS" - LDFLAGS="$LDFLAGS -b" - echo "$lt_simple_link_test_code" > conftest.$ac_ext - if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then - # The linker can only warn and ignore the option if not recognized - # So say no if there are warnings - if test -s conftest.err; then - # Append any errors to the config.log. - cat conftest.err 1>&5 - $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp - $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 - if diff conftest.exp conftest.er2 >/dev/null; then - lt_cv_prog_compiler__b=yes - fi - else - lt_cv_prog_compiler__b=yes - fi - fi - $RM -r conftest* - LDFLAGS="$save_LDFLAGS" - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler__b" >&5 -$as_echo "$lt_cv_prog_compiler__b" >&6; } - -if test x"$lt_cv_prog_compiler__b" = xyes; then - archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' -else - archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' -fi - - ;; - esac - fi - if test "$with_gnu_ld" = no; then - hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' - hardcode_libdir_separator=: - - case $host_cpu in - hppa*64*|ia64*) - hardcode_direct=no - hardcode_shlibpath_var=no - ;; - *) - hardcode_direct=yes - hardcode_direct_absolute=yes - export_dynamic_flag_spec='${wl}-E' - - # hardcode_minus_L: Not really in the search PATH, - # but as the default location of the library. - hardcode_minus_L=yes - ;; - esac - fi - ;; - - irix5* | irix6* | nonstopux*) - if test "$GCC" = yes; then - archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' - # Try to use the -exported_symbol ld option, if it does not - # work, assume that -exports_file does not work either and - # implicitly export all symbols. - # This should be the same for all languages, so no per-tag cache variable. - { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $host_os linker accepts -exported_symbol" >&5 -$as_echo_n "checking whether the $host_os linker accepts -exported_symbol... " >&6; } -if ${lt_cv_irix_exported_symbol+:} false; then : - $as_echo_n "(cached) " >&6 -else - save_LDFLAGS="$LDFLAGS" - LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ -int foo (void) { return 0; } -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - lt_cv_irix_exported_symbol=yes -else - lt_cv_irix_exported_symbol=no -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext - LDFLAGS="$save_LDFLAGS" -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_irix_exported_symbol" >&5 -$as_echo "$lt_cv_irix_exported_symbol" >&6; } - if test "$lt_cv_irix_exported_symbol" = yes; then - archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib' - fi - else - archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' - archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib' - fi - archive_cmds_need_lc='no' - hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' - hardcode_libdir_separator=: - inherit_rpath=yes - link_all_deplibs=yes - ;; - - netbsd* | netbsdelf*-gnu) - if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then - archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out - else - archive_cmds='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF - fi - hardcode_libdir_flag_spec='-R$libdir' - hardcode_direct=yes - hardcode_shlibpath_var=no - ;; - - newsos6) - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_direct=yes - hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' - hardcode_libdir_separator=: - hardcode_shlibpath_var=no - ;; - - *nto* | *qnx*) - ;; - - openbsd*) - if test -f /usr/libexec/ld.so; then - hardcode_direct=yes - hardcode_shlibpath_var=no - hardcode_direct_absolute=yes - if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then - archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' - archive_expsym_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols' - hardcode_libdir_flag_spec='${wl}-rpath,$libdir' - export_dynamic_flag_spec='${wl}-E' - else - case $host_os in - openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*) - archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' - hardcode_libdir_flag_spec='-R$libdir' - ;; - *) - archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' - hardcode_libdir_flag_spec='${wl}-rpath,$libdir' - ;; - esac - fi - else - ld_shlibs=no - fi - ;; - - os2*) - hardcode_libdir_flag_spec='-L$libdir' - hardcode_minus_L=yes - allow_undefined_flag=unsupported - archive_cmds='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~echo DATA >> $output_objdir/$libname.def~echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' - old_archive_from_new_cmds='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def' - ;; - - osf3*) - if test "$GCC" = yes; then - allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*' - archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' - else - allow_undefined_flag=' -expect_unresolved \*' - archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' - fi - archive_cmds_need_lc='no' - hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' - hardcode_libdir_separator=: - ;; - - osf4* | osf5*) # as osf3* with the addition of -msym flag - if test "$GCC" = yes; then - allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*' - archive_cmds='$CC -shared${allow_undefined_flag} $pic_flag $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' - hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' - else - allow_undefined_flag=' -expect_unresolved \*' - archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' - archive_expsym_cmds='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~ - $CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp' - - # Both c and cxx compiler support -rpath directly - hardcode_libdir_flag_spec='-rpath $libdir' - fi - archive_cmds_need_lc='no' - hardcode_libdir_separator=: - ;; - - solaris*) - no_undefined_flag=' -z defs' - if test "$GCC" = yes; then - wlarc='${wl}' - archive_cmds='$CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' - archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ - $CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' - else - case `$CC -V 2>&1` in - *"Compilers 5.0"*) - wlarc='' - archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' - archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ - $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp' - ;; - *) - wlarc='${wl}' - archive_cmds='$CC -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $compiler_flags' - archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ - $CC -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' - ;; - esac - fi - hardcode_libdir_flag_spec='-R$libdir' - hardcode_shlibpath_var=no - case $host_os in - solaris2.[0-5] | solaris2.[0-5].*) ;; - *) - # The compiler driver will combine and reorder linker options, - # but understands `-z linker_flag'. GCC discards it without `$wl', - # but is careful enough not to reorder. - # Supported since Solaris 2.6 (maybe 2.5.1?) - if test "$GCC" = yes; then - whole_archive_flag_spec='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' - else - whole_archive_flag_spec='-z allextract$convenience -z defaultextract' - fi - ;; - esac - link_all_deplibs=yes - ;; - - sunos4*) - if test "x$host_vendor" = xsequent; then - # Use $CC to link under sequent, because it throws in some extra .o - # files that make .init and .fini sections work. - archive_cmds='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags' - else - archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' - fi - hardcode_libdir_flag_spec='-L$libdir' - hardcode_direct=yes - hardcode_minus_L=yes - hardcode_shlibpath_var=no - ;; - - sysv4) - case $host_vendor in - sni) - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_direct=yes # is this really true??? - ;; - siemens) - ## LD is ld it makes a PLAMLIB - ## CC just makes a GrossModule. - archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags' - reload_cmds='$CC -r -o $output$reload_objs' - hardcode_direct=no - ;; - motorola) - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_direct=no #Motorola manual says yes, but my tests say they lie - ;; - esac - runpath_var='LD_RUN_PATH' - hardcode_shlibpath_var=no - ;; - - sysv4.3*) - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_shlibpath_var=no - export_dynamic_flag_spec='-Bexport' - ;; - - sysv4*MP*) - if test -d /usr/nec; then - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_shlibpath_var=no - runpath_var=LD_RUN_PATH - hardcode_runpath_var=yes - ld_shlibs=yes - fi - ;; - - sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*) - no_undefined_flag='${wl}-z,text' - archive_cmds_need_lc=no - hardcode_shlibpath_var=no - runpath_var='LD_RUN_PATH' - - if test "$GCC" = yes; then - archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - else - archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - fi - ;; - - sysv5* | sco3.2v5* | sco5v6*) - # Note: We can NOT use -z defs as we might desire, because we do not - # link with -lc, and that would cause any symbols used from libc to - # always be unresolved, which means just about no library would - # ever link correctly. If we're not using GNU ld we use -z text - # though, which does catch some bad symbols but isn't as heavy-handed - # as -z defs. - no_undefined_flag='${wl}-z,text' - allow_undefined_flag='${wl}-z,nodefs' - archive_cmds_need_lc=no - hardcode_shlibpath_var=no - hardcode_libdir_flag_spec='${wl}-R,$libdir' - hardcode_libdir_separator=':' - link_all_deplibs=yes - export_dynamic_flag_spec='${wl}-Bexport' - runpath_var='LD_RUN_PATH' - - if test "$GCC" = yes; then - archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - else - archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' - fi - ;; - - uts4*) - archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' - hardcode_libdir_flag_spec='-L$libdir' - hardcode_shlibpath_var=no - ;; - - *) - ld_shlibs=no - ;; - esac - - if test x$host_vendor = xsni; then - case $host in - sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) - export_dynamic_flag_spec='${wl}-Blargedynsym' - ;; - esac - fi - fi - -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ld_shlibs" >&5 -$as_echo "$ld_shlibs" >&6; } -test "$ld_shlibs" = no && can_build_shared=no - -with_gnu_ld=$with_gnu_ld - - - - - - - - - - - - - - - -# -# Do we need to explicitly link libc? -# -case "x$archive_cmds_need_lc" in -x|xyes) - # Assume -lc should be added - archive_cmds_need_lc=yes - - if test "$enable_shared" = yes && test "$GCC" = yes; then - case $archive_cmds in - *'~'*) - # FIXME: we may have to deal with multi-command sequences. - ;; - '$CC '*) - # Test whether the compiler implicitly links with -lc since on some - # systems, -lgcc has to come before -lc. If gcc already passes -lc - # to ld, don't add -lc before -lgcc. - { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether -lc should be explicitly linked in" >&5 -$as_echo_n "checking whether -lc should be explicitly linked in... " >&6; } -if ${lt_cv_archive_cmds_need_lc+:} false; then : - $as_echo_n "(cached) " >&6 -else - $RM conftest* - echo "$lt_simple_compile_test_code" > conftest.$ac_ext - - if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 - (eval $ac_compile) 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } 2>conftest.err; then - soname=conftest - lib=conftest - libobjs=conftest.$ac_objext - deplibs= - wl=$lt_prog_compiler_wl - pic_flag=$lt_prog_compiler_pic - compiler_flags=-v - linker_flags=-v - verstring= - output_objdir=. - libname=conftest - lt_save_allow_undefined_flag=$allow_undefined_flag - allow_undefined_flag= - if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1\""; } >&5 - (eval $archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } - then - lt_cv_archive_cmds_need_lc=no - else - lt_cv_archive_cmds_need_lc=yes - fi - allow_undefined_flag=$lt_save_allow_undefined_flag - else - cat conftest.err 1>&5 - fi - $RM conftest* - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_archive_cmds_need_lc" >&5 -$as_echo "$lt_cv_archive_cmds_need_lc" >&6; } - archive_cmds_need_lc=$lt_cv_archive_cmds_need_lc - ;; - esac - fi - ;; -esac - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking dynamic linker characteristics" >&5 -$as_echo_n "checking dynamic linker characteristics... " >&6; } - -if test "$GCC" = yes; then - case $host_os in - darwin*) lt_awk_arg="/^libraries:/,/LR/" ;; - *) lt_awk_arg="/^libraries:/" ;; - esac - case $host_os in - mingw* | cegcc*) lt_sed_strip_eq="s,=\([A-Za-z]:\),\1,g" ;; - *) lt_sed_strip_eq="s,=/,/,g" ;; - esac - lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e $lt_sed_strip_eq` - case $lt_search_path_spec in - *\;*) - # if the path contains ";" then we assume it to be the separator - # otherwise default to the standard path separator (i.e. ":") - it is - # assumed that no part of a normal pathname contains ";" but that should - # okay in the real world where ";" in dirpaths is itself problematic. - lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED 's/;/ /g'` - ;; - *) - lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED "s/$PATH_SEPARATOR/ /g"` - ;; - esac - # Ok, now we have the path, separated by spaces, we can step through it - # and add multilib dir if necessary. - lt_tmp_lt_search_path_spec= - lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null` - for lt_sys_path in $lt_search_path_spec; do - if test -d "$lt_sys_path/$lt_multi_os_dir"; then - lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir" - else - test -d "$lt_sys_path" && \ - lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path" - fi - done - lt_search_path_spec=`$ECHO "$lt_tmp_lt_search_path_spec" | awk ' -BEGIN {RS=" "; FS="/|\n";} { - lt_foo=""; - lt_count=0; - for (lt_i = NF; lt_i > 0; lt_i--) { - if ($lt_i != "" && $lt_i != ".") { - if ($lt_i == "..") { - lt_count++; - } else { - if (lt_count == 0) { - lt_foo="/" $lt_i lt_foo; - } else { - lt_count--; - } - } - } - } - if (lt_foo != "") { lt_freq[lt_foo]++; } - if (lt_freq[lt_foo] == 1) { print lt_foo; } -}'` - # AWK program above erroneously prepends '/' to C:/dos/paths - # for these hosts. - case $host_os in - mingw* | cegcc*) lt_search_path_spec=`$ECHO "$lt_search_path_spec" |\ - $SED 's,/\([A-Za-z]:\),\1,g'` ;; - esac - sys_lib_search_path_spec=`$ECHO "$lt_search_path_spec" | $lt_NL2SP` -else - sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" -fi -library_names_spec= -libname_spec='lib$name' -soname_spec= -shrext_cmds=".so" -postinstall_cmds= -postuninstall_cmds= -finish_cmds= -finish_eval= -shlibpath_var= -shlibpath_overrides_runpath=unknown -version_type=none -dynamic_linker="$host_os ld.so" -sys_lib_dlsearch_path_spec="/lib /usr/lib" -need_lib_prefix=unknown -hardcode_into_libs=no - -# when you set need_version to no, make sure it does not cause -set_version -# flags to be left without arguments -need_version=unknown - -case $host_os in -aix3*) - version_type=linux - library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a' - shlibpath_var=LIBPATH - - # AIX 3 has no versioning support, so we append a major version to the name. - soname_spec='${libname}${release}${shared_ext}$major' - ;; - -aix[4-9]*) - version_type=linux - need_lib_prefix=no - need_version=no - hardcode_into_libs=yes - if test "$host_cpu" = ia64; then - # AIX 5 supports IA64 - library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}' - shlibpath_var=LD_LIBRARY_PATH - else - # With GCC up to 2.95.x, collect2 would create an import file - # for dependence libraries. The import file would start with - # the line `#! .'. This would cause the generated library to - # depend on `.', always an invalid library. This was fixed in - # development snapshots of GCC prior to 3.0. - case $host_os in - aix4 | aix4.[01] | aix4.[01].*) - if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' - echo ' yes ' - echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then - : - else - can_build_shared=no - fi - ;; - esac - # AIX (on Power*) has no versioning support, so currently we can not hardcode correct - # soname into executable. Probably we can add versioning support to - # collect2, so additional links can be useful in future. - if test "$aix_use_runtimelinking" = yes; then - # If using run time linking (on AIX 4.2 or later) use lib.so - # instead of lib.a to let people know that these are not - # typical AIX shared libraries. - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - else - # We preserve .a as extension for shared libraries through AIX4.2 - # and later when we are not doing run time linking. - library_names_spec='${libname}${release}.a $libname.a' - soname_spec='${libname}${release}${shared_ext}$major' - fi - shlibpath_var=LIBPATH - fi - ;; - -amigaos*) - case $host_cpu in - powerpc) - # Since July 2007 AmigaOS4 officially supports .so libraries. - # When compiling the executable, add -use-dynld -Lsobjs: to the compileline. - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - ;; - m68k) - library_names_spec='$libname.ixlibrary $libname.a' - # Create ${libname}_ixlibrary.a entries in /sys/libs. - finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' - ;; - esac - ;; - -beos*) - library_names_spec='${libname}${shared_ext}' - dynamic_linker="$host_os ld.so" - shlibpath_var=LIBRARY_PATH - ;; - -bsdi[45]*) - version_type=linux - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' - shlibpath_var=LD_LIBRARY_PATH - sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" - sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" - # the default ld.so.conf also contains /usr/contrib/lib and - # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow - # libtool to hard-code these into programs - ;; - -cygwin* | mingw* | pw32* | cegcc*) - version_type=windows - shrext_cmds=".dll" - need_version=no - need_lib_prefix=no - - case $GCC,$cc_basename in - yes,*) - # gcc - library_names_spec='$libname.dll.a' - # DLL is installed to $(libdir)/../bin by postinstall_cmds - postinstall_cmds='base_file=`basename \${file}`~ - dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~ - dldir=$destdir/`dirname \$dlpath`~ - test -d \$dldir || mkdir -p \$dldir~ - $install_prog $dir/$dlname \$dldir/$dlname~ - chmod a+x \$dldir/$dlname~ - if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then - eval '\''$striplib \$dldir/$dlname'\'' || exit \$?; - fi' - postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ - dlpath=$dir/\$dldll~ - $RM \$dlpath' - shlibpath_overrides_runpath=yes - - case $host_os in - cygwin*) - # Cygwin DLLs use 'cyg' prefix rather than 'lib' - soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' - - sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/lib/w32api" - ;; - mingw* | cegcc*) - # MinGW DLLs use traditional 'lib' prefix - soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' - ;; - pw32*) - # pw32 DLLs use 'pw' prefix rather than 'lib' - library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' - ;; - esac - dynamic_linker='Win32 ld.exe' - ;; - - *,cl*) - # Native MSVC - libname_spec='$name' - soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' - library_names_spec='${libname}.dll.lib' - - case $build_os in - mingw*) - sys_lib_search_path_spec= - lt_save_ifs=$IFS - IFS=';' - for lt_path in $LIB - do - IFS=$lt_save_ifs - # Let DOS variable expansion print the short 8.3 style file name. - lt_path=`cd "$lt_path" 2>/dev/null && cmd //C "for %i in (".") do @echo %~si"` - sys_lib_search_path_spec="$sys_lib_search_path_spec $lt_path" - done - IFS=$lt_save_ifs - # Convert to MSYS style. - sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | sed -e 's|\\\\|/|g' -e 's| \\([a-zA-Z]\\):| /\\1|g' -e 's|^ ||'` - ;; - cygwin*) - # Convert to unix form, then to dos form, then back to unix form - # but this time dos style (no spaces!) so that the unix form looks - # like /cygdrive/c/PROGRA~1:/cygdr... - sys_lib_search_path_spec=`cygpath --path --unix "$LIB"` - sys_lib_search_path_spec=`cygpath --path --dos "$sys_lib_search_path_spec" 2>/dev/null` - sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` - ;; - *) - sys_lib_search_path_spec="$LIB" - if $ECHO "$sys_lib_search_path_spec" | $GREP ';[c-zC-Z]:/' >/dev/null; then - # It is most probably a Windows format PATH. - sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` - else - sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` - fi - # FIXME: find the short name or the path components, as spaces are - # common. (e.g. "Program Files" -> "PROGRA~1") - ;; - esac - - # DLL is installed to $(libdir)/../bin by postinstall_cmds - postinstall_cmds='base_file=`basename \${file}`~ - dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~ - dldir=$destdir/`dirname \$dlpath`~ - test -d \$dldir || mkdir -p \$dldir~ - $install_prog $dir/$dlname \$dldir/$dlname' - postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ - dlpath=$dir/\$dldll~ - $RM \$dlpath' - shlibpath_overrides_runpath=yes - dynamic_linker='Win32 link.exe' - ;; - - *) - # Assume MSVC wrapper - library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib' - dynamic_linker='Win32 ld.exe' - ;; - esac - # FIXME: first we should search . and the directory the executable is in - shlibpath_var=PATH - ;; - -darwin* | rhapsody*) - dynamic_linker="$host_os dyld" - version_type=darwin - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext' - soname_spec='${libname}${release}${major}$shared_ext' - shlibpath_overrides_runpath=yes - shlibpath_var=DYLD_LIBRARY_PATH - shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`' - - sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib" - sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib' - ;; - -dgux*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - ;; - -freebsd1*) - dynamic_linker=no - ;; - -freebsd* | dragonfly*) - # DragonFly does not have aout. When/if they implement a new - # versioning mechanism, adjust this. - if test -x /usr/bin/objformat; then - objformat=`/usr/bin/objformat` - else - case $host_os in - freebsd[123]*) objformat=aout ;; - *) objformat=elf ;; - esac - fi - version_type=freebsd-$objformat - case $version_type in - freebsd-elf*) - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' - need_version=no - need_lib_prefix=no - ;; - freebsd-*) - library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix' - need_version=yes - ;; - esac - shlibpath_var=LD_LIBRARY_PATH - case $host_os in - freebsd2*) - shlibpath_overrides_runpath=yes - ;; - freebsd3.[01]* | freebsdelf3.[01]*) - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - ;; - freebsd3.[2-9]* | freebsdelf3.[2-9]* | \ - freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1) - shlibpath_overrides_runpath=no - hardcode_into_libs=yes - ;; - *) # from 4.6 on, and DragonFly - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - ;; - esac - ;; - -gnu*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no - hardcode_into_libs=yes - ;; - -haiku*) - version_type=linux - need_lib_prefix=no - need_version=no - dynamic_linker="$host_os runtime_loader" - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LIBRARY_PATH - shlibpath_overrides_runpath=yes - sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib' - hardcode_into_libs=yes - ;; - -hpux9* | hpux10* | hpux11*) - # Give a soname corresponding to the major version so that dld.sl refuses to - # link against other versions. - version_type=sunos - need_lib_prefix=no - need_version=no - case $host_cpu in - ia64*) - shrext_cmds='.so' - hardcode_into_libs=yes - dynamic_linker="$host_os dld.so" - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - if test "X$HPUX_IA64_MODE" = X32; then - sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib" - else - sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64" - fi - sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec - ;; - hppa*64*) - shrext_cmds='.sl' - hardcode_into_libs=yes - dynamic_linker="$host_os dld.sl" - shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH - shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64" - sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec - ;; - *) - shrext_cmds='.sl' - dynamic_linker="$host_os dld.sl" - shlibpath_var=SHLIB_PATH - shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - ;; - esac - # HP-UX runs *really* slowly unless shared libraries are mode 555, ... - postinstall_cmds='chmod 555 $lib' - # or fails outright, so override atomically: - install_override_mode=555 - ;; - -interix[3-9]*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no - hardcode_into_libs=yes - ;; - -irix5* | irix6* | nonstopux*) - case $host_os in - nonstopux*) version_type=nonstopux ;; - *) - if test "$lt_cv_prog_gnu_ld" = yes; then - version_type=linux - else - version_type=irix - fi ;; - esac - need_lib_prefix=no - need_version=no - soname_spec='${libname}${release}${shared_ext}$major' - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}' - case $host_os in - irix5* | nonstopux*) - libsuff= shlibsuff= - ;; - *) - case $LD in # libtool.m4 will add one of these switches to LD - *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") - libsuff= shlibsuff= libmagic=32-bit;; - *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") - libsuff=32 shlibsuff=N32 libmagic=N32;; - *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") - libsuff=64 shlibsuff=64 libmagic=64-bit;; - *) libsuff= shlibsuff= libmagic=never-match;; - esac - ;; - esac - shlibpath_var=LD_LIBRARY${shlibsuff}_PATH - shlibpath_overrides_runpath=no - sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" - sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" - hardcode_into_libs=yes - ;; - -# No shared lib support for Linux oldld, aout, or coff. -linux*oldld* | linux*aout* | linux*coff*) - dynamic_linker=no - ;; - -# This must be Linux ELF. -linux* | k*bsd*-gnu | kopensolaris*-gnu) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no - - # Some binutils ld are patched to set DT_RUNPATH - if ${lt_cv_shlibpath_overrides_runpath+:} false; then : - $as_echo_n "(cached) " >&6 -else - lt_cv_shlibpath_overrides_runpath=no - save_LDFLAGS=$LDFLAGS - save_libdir=$libdir - eval "libdir=/foo; wl=\"$lt_prog_compiler_wl\"; \ - LDFLAGS=\"\$LDFLAGS $hardcode_libdir_flag_spec\"" - cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -int -main () -{ - - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - if ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null; then : - lt_cv_shlibpath_overrides_runpath=yes -fi -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext - LDFLAGS=$save_LDFLAGS - libdir=$save_libdir - -fi - - shlibpath_overrides_runpath=$lt_cv_shlibpath_overrides_runpath - - # This implies no fast_install, which is unacceptable. - # Some rework will be needed to allow for fast_install - # before this can be enabled. - hardcode_into_libs=yes - - # Append ld.so.conf contents to the search path - if test -f /etc/ld.so.conf; then - lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '` - sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra" - fi - - # We used to test for /lib/ld.so.1 and disable shared libraries on - # powerpc, because MkLinux only supported shared libraries with the - # GNU dynamic linker. Since this was broken with cross compilers, - # most powerpc-linux boxes support dynamic linking these days and - # people can always --disable-shared, the test was removed, and we - # assume the GNU/Linux dynamic linker is in use. - dynamic_linker='GNU/Linux ld.so' - ;; - -netbsdelf*-gnu) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no - hardcode_into_libs=yes - dynamic_linker='NetBSD ld.elf_so' - ;; - -netbsd*) - version_type=sunos - need_lib_prefix=no - need_version=no - if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' - finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' - dynamic_linker='NetBSD (a.out) ld.so' - else - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - dynamic_linker='NetBSD ld.elf_so' - fi - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - ;; - -newsos6) - version_type=linux - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - ;; - -*nto* | *qnx*) - version_type=qnx - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no - hardcode_into_libs=yes - dynamic_linker='ldqnx.so' - ;; - -openbsd*) - version_type=sunos - sys_lib_dlsearch_path_spec="/usr/lib" - need_lib_prefix=no - # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs. - case $host_os in - openbsd3.3 | openbsd3.3.*) need_version=yes ;; - *) need_version=no ;; - esac - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' - finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' - shlibpath_var=LD_LIBRARY_PATH - if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then - case $host_os in - openbsd2.[89] | openbsd2.[89].*) - shlibpath_overrides_runpath=no - ;; - *) - shlibpath_overrides_runpath=yes - ;; - esac - else - shlibpath_overrides_runpath=yes - fi - ;; - -os2*) - libname_spec='$name' - shrext_cmds=".dll" - need_lib_prefix=no - library_names_spec='$libname${shared_ext} $libname.a' - dynamic_linker='OS/2 ld.exe' - shlibpath_var=LIBPATH - ;; - -osf3* | osf4* | osf5*) - version_type=osf - need_lib_prefix=no - need_version=no - soname_spec='${libname}${release}${shared_ext}$major' - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - shlibpath_var=LD_LIBRARY_PATH - sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" - sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" - ;; - -rdos*) - dynamic_linker=no - ;; - -solaris*) - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - # ldd complains unless libraries are executable - postinstall_cmds='chmod +x $lib' - ;; - -sunos4*) - version_type=sunos - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' - finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - if test "$with_gnu_ld" = yes; then - need_lib_prefix=no - fi - need_version=yes - ;; - -sysv4 | sysv4.3*) - version_type=linux - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - case $host_vendor in - sni) - shlibpath_overrides_runpath=no - need_lib_prefix=no - runpath_var=LD_RUN_PATH - ;; - siemens) - need_lib_prefix=no - ;; - motorola) - need_lib_prefix=no - need_version=no - shlibpath_overrides_runpath=no - sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' - ;; - esac - ;; - -sysv4*MP*) - if test -d /usr/nec ;then - version_type=linux - library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}' - soname_spec='$libname${shared_ext}.$major' - shlibpath_var=LD_LIBRARY_PATH - fi - ;; - -sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) - version_type=freebsd-elf - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=yes - hardcode_into_libs=yes - if test "$with_gnu_ld" = yes; then - sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib' - else - sys_lib_search_path_spec='/usr/ccs/lib /usr/lib' - case $host_os in - sco3.2v5*) - sys_lib_search_path_spec="$sys_lib_search_path_spec /lib" - ;; - esac - fi - sys_lib_dlsearch_path_spec='/usr/lib' - ;; - -tpf*) - # TPF is a cross-target only. Preferred cross-host = GNU/Linux. - version_type=linux - need_lib_prefix=no - need_version=no - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - shlibpath_var=LD_LIBRARY_PATH - shlibpath_overrides_runpath=no - hardcode_into_libs=yes - ;; - -uts4*) - version_type=linux - library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' - soname_spec='${libname}${release}${shared_ext}$major' - shlibpath_var=LD_LIBRARY_PATH - ;; - -*) - dynamic_linker=no - ;; -esac -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $dynamic_linker" >&5 -$as_echo "$dynamic_linker" >&6; } -test "$dynamic_linker" = no && can_build_shared=no - -variables_saved_for_relink="PATH $shlibpath_var $runpath_var" -if test "$GCC" = yes; then - variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" -fi - -if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then - sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec" -fi -if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then - sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec" -fi - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to hardcode library paths into programs" >&5 -$as_echo_n "checking how to hardcode library paths into programs... " >&6; } -hardcode_action= -if test -n "$hardcode_libdir_flag_spec" || - test -n "$runpath_var" || - test "X$hardcode_automatic" = "Xyes" ; then - - # We can hardcode non-existent directories. - if test "$hardcode_direct" != no && - # If the only mechanism to avoid hardcoding is shlibpath_var, we - # have to relink, otherwise we might link with an installed library - # when we should be linking with a yet-to-be-installed one - ## test "$_LT_TAGVAR(hardcode_shlibpath_var, )" != no && - test "$hardcode_minus_L" != no; then - # Linking always hardcodes the temporary library directory. - hardcode_action=relink - else - # We can link without hardcoding, and we can hardcode nonexisting dirs. - hardcode_action=immediate - fi -else - # We cannot hardcode anything, or else we can only hardcode existing - # directories. - hardcode_action=unsupported -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $hardcode_action" >&5 -$as_echo "$hardcode_action" >&6; } - -if test "$hardcode_action" = relink || - test "$inherit_rpath" = yes; then - # Fast installation is not supported - enable_fast_install=no -elif test "$shlibpath_overrides_runpath" = yes || - test "$enable_shared" = no; then - # Fast installation is not necessary - enable_fast_install=needless -fi - - - - - - - if test "x$enable_dlopen" != xyes; then - enable_dlopen=unknown - enable_dlopen_self=unknown - enable_dlopen_self_static=unknown -else - lt_cv_dlopen=no - lt_cv_dlopen_libs= - - case $host_os in - beos*) - lt_cv_dlopen="load_add_on" - lt_cv_dlopen_libs= - lt_cv_dlopen_self=yes - ;; - - mingw* | pw32* | cegcc*) - lt_cv_dlopen="LoadLibrary" - lt_cv_dlopen_libs= - ;; - - cygwin*) - lt_cv_dlopen="dlopen" - lt_cv_dlopen_libs= - ;; - - darwin*) - # if libdl is installed we need to link against it - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5 -$as_echo_n "checking for dlopen in -ldl... " >&6; } -if ${ac_cv_lib_dl_dlopen+:} false; then : - $as_echo_n "(cached) " >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-ldl $LIBS" -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char dlopen (); -int -main () -{ -return dlopen (); - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - ac_cv_lib_dl_dlopen=yes -else - ac_cv_lib_dl_dlopen=no -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5 -$as_echo "$ac_cv_lib_dl_dlopen" >&6; } -if test "x$ac_cv_lib_dl_dlopen" = xyes; then : - lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl" -else - - lt_cv_dlopen="dyld" - lt_cv_dlopen_libs= - lt_cv_dlopen_self=yes - -fi - - ;; - - *) - ac_fn_c_check_func "$LINENO" "shl_load" "ac_cv_func_shl_load" -if test "x$ac_cv_func_shl_load" = xyes; then : - lt_cv_dlopen="shl_load" -else - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for shl_load in -ldld" >&5 -$as_echo_n "checking for shl_load in -ldld... " >&6; } -if ${ac_cv_lib_dld_shl_load+:} false; then : - $as_echo_n "(cached) " >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-ldld $LIBS" -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char shl_load (); -int -main () -{ -return shl_load (); - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - ac_cv_lib_dld_shl_load=yes -else - ac_cv_lib_dld_shl_load=no -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_shl_load" >&5 -$as_echo "$ac_cv_lib_dld_shl_load" >&6; } -if test "x$ac_cv_lib_dld_shl_load" = xyes; then : - lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld" -else - ac_fn_c_check_func "$LINENO" "dlopen" "ac_cv_func_dlopen" -if test "x$ac_cv_func_dlopen" = xyes; then : - lt_cv_dlopen="dlopen" -else - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5 -$as_echo_n "checking for dlopen in -ldl... " >&6; } -if ${ac_cv_lib_dl_dlopen+:} false; then : - $as_echo_n "(cached) " >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-ldl $LIBS" -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char dlopen (); -int -main () -{ -return dlopen (); - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - ac_cv_lib_dl_dlopen=yes -else - ac_cv_lib_dl_dlopen=no -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5 -$as_echo "$ac_cv_lib_dl_dlopen" >&6; } -if test "x$ac_cv_lib_dl_dlopen" = xyes; then : - lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl" -else - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -lsvld" >&5 -$as_echo_n "checking for dlopen in -lsvld... " >&6; } -if ${ac_cv_lib_svld_dlopen+:} false; then : - $as_echo_n "(cached) " >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-lsvld $LIBS" -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char dlopen (); -int -main () -{ -return dlopen (); - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - ac_cv_lib_svld_dlopen=yes -else - ac_cv_lib_svld_dlopen=no -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_svld_dlopen" >&5 -$as_echo "$ac_cv_lib_svld_dlopen" >&6; } -if test "x$ac_cv_lib_svld_dlopen" = xyes; then : - lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld" -else - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dld_link in -ldld" >&5 -$as_echo_n "checking for dld_link in -ldld... " >&6; } -if ${ac_cv_lib_dld_dld_link+:} false; then : - $as_echo_n "(cached) " >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-ldld $LIBS" -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - -/* Override any GCC internal prototype to avoid an error. - Use char because int might match the return type of a GCC - builtin and then its argument prototype would still apply. */ -#ifdef __cplusplus -extern "C" -#endif -char dld_link (); -int -main () -{ -return dld_link (); - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - ac_cv_lib_dld_dld_link=yes -else - ac_cv_lib_dld_dld_link=no -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_dld_link" >&5 -$as_echo "$ac_cv_lib_dld_dld_link" >&6; } -if test "x$ac_cv_lib_dld_dld_link" = xyes; then : - lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld" -fi - - -fi - - -fi - - -fi - - -fi - - -fi - - ;; - esac - - if test "x$lt_cv_dlopen" != xno; then - enable_dlopen=yes - else - enable_dlopen=no - fi - - case $lt_cv_dlopen in - dlopen) - save_CPPFLAGS="$CPPFLAGS" - test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H" - - save_LDFLAGS="$LDFLAGS" - wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\" - - save_LIBS="$LIBS" - LIBS="$lt_cv_dlopen_libs $LIBS" - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a program can dlopen itself" >&5 -$as_echo_n "checking whether a program can dlopen itself... " >&6; } -if ${lt_cv_dlopen_self+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test "$cross_compiling" = yes; then : - lt_cv_dlopen_self=cross -else - lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 - lt_status=$lt_dlunknown - cat > conftest.$ac_ext <<_LT_EOF -#line $LINENO "configure" -#include "confdefs.h" - -#if HAVE_DLFCN_H -#include -#endif - -#include - -#ifdef RTLD_GLOBAL -# define LT_DLGLOBAL RTLD_GLOBAL -#else -# ifdef DL_GLOBAL -# define LT_DLGLOBAL DL_GLOBAL -# else -# define LT_DLGLOBAL 0 -# endif -#endif - -/* We may have to define LT_DLLAZY_OR_NOW in the command line if we - find out it does not work in some platform. */ -#ifndef LT_DLLAZY_OR_NOW -# ifdef RTLD_LAZY -# define LT_DLLAZY_OR_NOW RTLD_LAZY -# else -# ifdef DL_LAZY -# define LT_DLLAZY_OR_NOW DL_LAZY -# else -# ifdef RTLD_NOW -# define LT_DLLAZY_OR_NOW RTLD_NOW -# else -# ifdef DL_NOW -# define LT_DLLAZY_OR_NOW DL_NOW -# else -# define LT_DLLAZY_OR_NOW 0 -# endif -# endif -# endif -# endif -#endif - -/* When -fvisbility=hidden is used, assume the code has been annotated - correspondingly for the symbols needed. */ -#if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3)) -int fnord () __attribute__((visibility("default"))); -#endif - -int fnord () { return 42; } -int main () -{ - void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); - int status = $lt_dlunknown; - - if (self) - { - if (dlsym (self,"fnord")) status = $lt_dlno_uscore; - else - { - if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; - else puts (dlerror ()); - } - /* dlclose (self); */ - } - else - puts (dlerror ()); - - return status; -} -_LT_EOF - if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5 - (eval $ac_link) 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } && test -s conftest${ac_exeext} 2>/dev/null; then - (./conftest; exit; ) >&5 2>/dev/null - lt_status=$? - case x$lt_status in - x$lt_dlno_uscore) lt_cv_dlopen_self=yes ;; - x$lt_dlneed_uscore) lt_cv_dlopen_self=yes ;; - x$lt_dlunknown|x*) lt_cv_dlopen_self=no ;; - esac - else : - # compilation failed - lt_cv_dlopen_self=no - fi -fi -rm -fr conftest* - - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_dlopen_self" >&5 -$as_echo "$lt_cv_dlopen_self" >&6; } - - if test "x$lt_cv_dlopen_self" = xyes; then - wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\" - { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a statically linked program can dlopen itself" >&5 -$as_echo_n "checking whether a statically linked program can dlopen itself... " >&6; } -if ${lt_cv_dlopen_self_static+:} false; then : - $as_echo_n "(cached) " >&6 -else - if test "$cross_compiling" = yes; then : - lt_cv_dlopen_self_static=cross -else - lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 - lt_status=$lt_dlunknown - cat > conftest.$ac_ext <<_LT_EOF -#line $LINENO "configure" -#include "confdefs.h" - -#if HAVE_DLFCN_H -#include -#endif - -#include - -#ifdef RTLD_GLOBAL -# define LT_DLGLOBAL RTLD_GLOBAL -#else -# ifdef DL_GLOBAL -# define LT_DLGLOBAL DL_GLOBAL -# else -# define LT_DLGLOBAL 0 -# endif -#endif - -/* We may have to define LT_DLLAZY_OR_NOW in the command line if we - find out it does not work in some platform. */ -#ifndef LT_DLLAZY_OR_NOW -# ifdef RTLD_LAZY -# define LT_DLLAZY_OR_NOW RTLD_LAZY -# else -# ifdef DL_LAZY -# define LT_DLLAZY_OR_NOW DL_LAZY -# else -# ifdef RTLD_NOW -# define LT_DLLAZY_OR_NOW RTLD_NOW -# else -# ifdef DL_NOW -# define LT_DLLAZY_OR_NOW DL_NOW -# else -# define LT_DLLAZY_OR_NOW 0 -# endif -# endif -# endif -# endif -#endif - -/* When -fvisbility=hidden is used, assume the code has been annotated - correspondingly for the symbols needed. */ -#if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3)) -int fnord () __attribute__((visibility("default"))); -#endif - -int fnord () { return 42; } -int main () -{ - void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); - int status = $lt_dlunknown; - - if (self) - { - if (dlsym (self,"fnord")) status = $lt_dlno_uscore; - else - { - if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; - else puts (dlerror ()); - } - /* dlclose (self); */ - } - else - puts (dlerror ()); - - return status; -} -_LT_EOF - if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5 - (eval $ac_link) 2>&5 - ac_status=$? - $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5 - test $ac_status = 0; } && test -s conftest${ac_exeext} 2>/dev/null; then - (./conftest; exit; ) >&5 2>/dev/null - lt_status=$? - case x$lt_status in - x$lt_dlno_uscore) lt_cv_dlopen_self_static=yes ;; - x$lt_dlneed_uscore) lt_cv_dlopen_self_static=yes ;; - x$lt_dlunknown|x*) lt_cv_dlopen_self_static=no ;; - esac - else : - # compilation failed - lt_cv_dlopen_self_static=no - fi -fi -rm -fr conftest* - - -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_dlopen_self_static" >&5 -$as_echo "$lt_cv_dlopen_self_static" >&6; } - fi - - CPPFLAGS="$save_CPPFLAGS" - LDFLAGS="$save_LDFLAGS" - LIBS="$save_LIBS" - ;; - esac - - case $lt_cv_dlopen_self in - yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;; - *) enable_dlopen_self=unknown ;; - esac - - case $lt_cv_dlopen_self_static in - yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;; - *) enable_dlopen_self_static=unknown ;; - esac -fi - - - - - - - - - - - - - - - - - -striplib= -old_striplib= -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether stripping libraries is possible" >&5 -$as_echo_n "checking whether stripping libraries is possible... " >&6; } -if test -n "$STRIP" && $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then - test -z "$old_striplib" && old_striplib="$STRIP --strip-debug" - test -z "$striplib" && striplib="$STRIP --strip-unneeded" - { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -$as_echo "yes" >&6; } -else -# FIXME - insert some real tests, host_os isn't really good enough - case $host_os in - darwin*) - if test -n "$STRIP" ; then - striplib="$STRIP -x" - old_striplib="$STRIP -S" - { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5 -$as_echo "yes" >&6; } - else - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } - fi - ;; - *) - { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 -$as_echo "no" >&6; } - ;; - esac -fi - - - - - - - - - - - - - # Report which library types will actually be built - { $as_echo "$as_me:${as_lineno-$LINENO}: checking if libtool supports shared libraries" >&5 -$as_echo_n "checking if libtool supports shared libraries... " >&6; } - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $can_build_shared" >&5 -$as_echo "$can_build_shared" >&6; } - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build shared libraries" >&5 -$as_echo_n "checking whether to build shared libraries... " >&6; } - test "$can_build_shared" = "no" && enable_shared=no - - # On AIX, shared libraries and static libraries use the same namespace, and - # are all built from PIC. - case $host_os in - aix3*) - test "$enable_shared" = yes && enable_static=no - if test -n "$RANLIB"; then - archive_cmds="$archive_cmds~\$RANLIB \$lib" - postinstall_cmds='$RANLIB $lib' - fi - ;; - - aix[4-9]*) - if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then - test "$enable_shared" = yes && enable_static=no - fi - ;; - esac - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_shared" >&5 -$as_echo "$enable_shared" >&6; } - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build static libraries" >&5 -$as_echo_n "checking whether to build static libraries... " >&6; } - # Make sure either enable_shared or enable_static is yes. - test "$enable_shared" = yes || enable_static=yes - { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_static" >&5 -$as_echo "$enable_static" >&6; } - - - - -fi -ac_ext=c -ac_cpp='$CPP $CPPFLAGS' -ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' -ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' -ac_compiler_gnu=$ac_cv_c_compiler_gnu - -CC="$lt_save_CC" - - - - - - - - - - - - - - ac_config_commands="$ac_config_commands libtool" - - - - -# Only expand once: - - - -# Checks for libraries. -#AC_CHECK_LIB([c], [main]) -#AC_CHECK_LIB([m], [main]) -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for main in -lssl" >&5 -$as_echo_n "checking for main in -lssl... " >&6; } -if ${ac_cv_lib_ssl_main+:} false; then : - $as_echo_n "(cached) " >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-lssl $LIBS" -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - - -int -main () -{ -return main (); - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - ac_cv_lib_ssl_main=yes -else - ac_cv_lib_ssl_main=no -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_ssl_main" >&5 -$as_echo "$ac_cv_lib_ssl_main" >&6; } -if test "x$ac_cv_lib_ssl_main" = xyes; then : - cat >>confdefs.h <<_ACEOF -@%:@define HAVE_LIBSSL 1 -_ACEOF - - LIBS="-lssl $LIBS" - -else - as_fn_error $? "$missing_library" "$LINENO" 5 -fi - -{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for main in -lpthread" >&5 -$as_echo_n "checking for main in -lpthread... " >&6; } -if ${ac_cv_lib_pthread_main+:} false; then : - $as_echo_n "(cached) " >&6 -else - ac_check_lib_save_LIBS=$LIBS -LIBS="-lpthread $LIBS" -cat confdefs.h - <<_ACEOF >conftest.$ac_ext -/* end confdefs.h. */ - - -int -main () -{ -return main (); - ; - return 0; -} -_ACEOF -if ac_fn_c_try_link "$LINENO"; then : - ac_cv_lib_pthread_main=yes -else - ac_cv_lib_pthread_main=no -fi -rm -f core conftest.err conftest.$ac_objext \ - conftest$ac_exeext conftest.$ac_ext -LIBS=$ac_check_lib_save_LIBS -fi -{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_pthread_main" >&5 -$as_echo "$ac_cv_lib_pthread_main" >&6; } -if test "x$ac_cv_lib_pthread_main" = xyes; then : - cat >>confdefs.h <<_ACEOF -@%:@define HAVE_LIBPTHREAD 1 -_ACEOF - - LIBS="-lpthread $LIBS" - -else - as_fn_error $? "$missing_library" "$LINENO" 5 -fi - - -OUTPUT_FILES="Makefile" - -LIBDIR=$PREFIX - -ac_config_files="$ac_config_files ${OUTPUT_FILES}" - -ac_config_files="$ac_config_files Makefile src/Makefile" - -cat >confcache <<\_ACEOF -# This file is a shell script that caches the results of configure -# tests run on this system so they can be shared between configure -# scripts and configure runs, see configure's option --config-cache. -# It is not useful on other systems. If it contains results you don't -# want to keep, you may remove or edit it. -# -# config.status only pays attention to the cache file if you give it -# the --recheck option to rerun configure. -# -# `ac_cv_env_foo' variables (set or unset) will be overridden when -# loading this file, other *unset* `ac_cv_foo' will be assigned the -# following values. - -_ACEOF - -# The following way of writing the cache mishandles newlines in values, -# but we know of no workaround that is simple, portable, and efficient. -# So, we kill variables containing newlines. -# Ultrix sh set writes to stderr and can't be redirected directly, -# and sets the high bit in the cache file unless we assign to the vars. -( - for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do - eval ac_val=\$$ac_var - case $ac_val in #( - *${as_nl}*) - case $ac_var in #( - *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5 -$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;; - esac - case $ac_var in #( - _ | IFS | as_nl) ;; #( - BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #( - *) { eval $ac_var=; unset $ac_var;} ;; - esac ;; - esac - done - - (set) 2>&1 | - case $as_nl`(ac_space=' '; set) 2>&1` in #( - *${as_nl}ac_space=\ *) - # `set' does not quote correctly, so add quotes: double-quote - # substitution turns \\\\ into \\, and sed turns \\ into \. - sed -n \ - "s/'/'\\\\''/g; - s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p" - ;; #( - *) - # `set' quotes correctly as required by POSIX, so do not add quotes. - sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" - ;; - esac | - sort -) | - sed ' - /^ac_cv_env_/b end - t clear - :clear - s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/ - t end - s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/ - :end' >>confcache -if diff "$cache_file" confcache >/dev/null 2>&1; then :; else - if test -w "$cache_file"; then - if test "x$cache_file" != "x/dev/null"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: updating cache $cache_file" >&5 -$as_echo "$as_me: updating cache $cache_file" >&6;} - if test ! -f "$cache_file" || test -h "$cache_file"; then - cat confcache >"$cache_file" - else - case $cache_file in #( - */* | ?:*) - mv -f confcache "$cache_file"$$ && - mv -f "$cache_file"$$ "$cache_file" ;; #( - *) - mv -f confcache "$cache_file" ;; - esac - fi - fi - else - { $as_echo "$as_me:${as_lineno-$LINENO}: not updating unwritable cache $cache_file" >&5 -$as_echo "$as_me: not updating unwritable cache $cache_file" >&6;} - fi -fi -rm -f confcache - -test "x$prefix" = xNONE && prefix=$ac_default_prefix -# Let make expand exec_prefix. -test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' - -DEFS=-DHAVE_CONFIG_H - -ac_libobjs= -ac_ltlibobjs= -U= -for ac_i in : $LIB@&t@OBJS; do test "x$ac_i" = x: && continue - # 1. Remove the extension, and $U if already installed. - ac_script='s/\$U\././;s/\.o$//;s/\.obj$//' - ac_i=`$as_echo "$ac_i" | sed "$ac_script"` - # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR - # will be set to the directory where LIBOBJS objects are built. - as_fn_append ac_libobjs " \${LIBOBJDIR}$ac_i\$U.$ac_objext" - as_fn_append ac_ltlibobjs " \${LIBOBJDIR}$ac_i"'$U.lo' -done -LIB@&t@OBJS=$ac_libobjs - -LTLIBOBJS=$ac_ltlibobjs - - - if test -n "$EXEEXT"; then - am__EXEEXT_TRUE= - am__EXEEXT_FALSE='#' -else - am__EXEEXT_TRUE='#' - am__EXEEXT_FALSE= -fi - -if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then - as_fn_error $? "conditional \"AMDEP\" was never defined. -Usually this means the macro was only invoked conditionally." "$LINENO" 5 -fi -if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then - as_fn_error $? "conditional \"am__fastdepCC\" was never defined. -Usually this means the macro was only invoked conditionally." "$LINENO" 5 -fi - -: "${CONFIG_STATUS=./config.status}" -ac_write_fail=0 -ac_clean_files_save=$ac_clean_files -ac_clean_files="$ac_clean_files $CONFIG_STATUS" -{ $as_echo "$as_me:${as_lineno-$LINENO}: creating $CONFIG_STATUS" >&5 -$as_echo "$as_me: creating $CONFIG_STATUS" >&6;} -as_write_fail=0 -cat >$CONFIG_STATUS <<_ASEOF || as_write_fail=1 -#! $SHELL -# Generated by $as_me. -# Run this file to recreate the current configuration. -# Compiler output produced by configure, useful for debugging -# configure, is in config.log if it exists. - -debug=false -ac_cs_recheck=false -ac_cs_silent=false - -SHELL=\${CONFIG_SHELL-$SHELL} -export SHELL -_ASEOF -cat >>$CONFIG_STATUS <<\_ASEOF || as_write_fail=1 -## -------------------- ## -## M4sh Initialization. ## -## -------------------- ## - -# Be more Bourne compatible -DUALCASE=1; export DUALCASE # for MKS sh -if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then : - emulate sh - NULLCMD=: - # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which - # is contrary to our usage. Disable this feature. - alias -g '${1+"$@"}'='"$@"' - setopt NO_GLOB_SUBST -else - case `(set -o) 2>/dev/null` in @%:@( - *posix*) : - set -o posix ;; @%:@( - *) : - ;; -esac -fi - - -as_nl=' -' -export as_nl -# Printing a long string crashes Solaris 7 /usr/bin/printf. -as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' -as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo -as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo -# Prefer a ksh shell builtin over an external printf program on Solaris, -# but without wasting forks for bash or zsh. -if test -z "$BASH_VERSION$ZSH_VERSION" \ - && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then - as_echo='print -r --' - as_echo_n='print -rn --' -elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then - as_echo='printf %s\n' - as_echo_n='printf %s' -else - if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then - as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"' - as_echo_n='/usr/ucb/echo -n' - else - as_echo_body='eval expr "X$1" : "X\\(.*\\)"' - as_echo_n_body='eval - arg=$1; - case $arg in @%:@( - *"$as_nl"*) - expr "X$arg" : "X\\(.*\\)$as_nl"; - arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;; - esac; - expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl" - ' - export as_echo_n_body - as_echo_n='sh -c $as_echo_n_body as_echo' - fi - export as_echo_body - as_echo='sh -c $as_echo_body as_echo' -fi - -# The user is always right. -if test "${PATH_SEPARATOR+set}" != set; then - PATH_SEPARATOR=: - (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { - (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || - PATH_SEPARATOR=';' - } -fi - - -# IFS -# We need space, tab and new line, in precisely that order. Quoting is -# there to prevent editors from complaining about space-tab. -# (If _AS_PATH_WALK were called with IFS unset, it would disable word -# splitting by setting IFS to empty value.) -IFS=" "" $as_nl" - -# Find who we are. Look in the path if we contain no directory separator. -as_myself= -case $0 in @%:@(( - *[\\/]* ) as_myself=$0 ;; - *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break - done -IFS=$as_save_IFS - - ;; -esac -# We did not find ourselves, most probably we were run as `sh COMMAND' -# in which case we are not to be found in the path. -if test "x$as_myself" = x; then - as_myself=$0 -fi -if test ! -f "$as_myself"; then - $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 - exit 1 -fi - -# Unset variables that we do not need and which cause bugs (e.g. in -# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1" -# suppresses any "Segmentation fault" message there. '((' could -# trigger a bug in pdksh 5.2.14. -for as_var in BASH_ENV ENV MAIL MAILPATH -do eval test x\${$as_var+set} = xset \ - && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || : -done -PS1='$ ' -PS2='> ' -PS4='+ ' - -# NLS nuisances. -LC_ALL=C -export LC_ALL -LANGUAGE=C -export LANGUAGE - -# CDPATH. -(unset CDPATH) >/dev/null 2>&1 && unset CDPATH - - -@%:@ as_fn_error STATUS ERROR [LINENO LOG_FD] -@%:@ ---------------------------------------- -@%:@ Output "`basename @S|@0`: error: ERROR" to stderr. If LINENO and LOG_FD are -@%:@ provided, also output the error to LOG_FD, referencing LINENO. Then exit the -@%:@ script with STATUS, using 1 if that was 0. -as_fn_error () -{ - as_status=$1; test $as_status -eq 0 && as_status=1 - if test "$4"; then - as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4 - fi - $as_echo "$as_me: error: $2" >&2 - as_fn_exit $as_status -} @%:@ as_fn_error - - -@%:@ as_fn_set_status STATUS -@%:@ ----------------------- -@%:@ Set @S|@? to STATUS, without forking. -as_fn_set_status () -{ - return $1 -} @%:@ as_fn_set_status - -@%:@ as_fn_exit STATUS -@%:@ ----------------- -@%:@ Exit the shell with STATUS, even in a "trap 0" or "set -e" context. -as_fn_exit () -{ - set +e - as_fn_set_status $1 - exit $1 -} @%:@ as_fn_exit - -@%:@ as_fn_unset VAR -@%:@ --------------- -@%:@ Portably unset VAR. -as_fn_unset () -{ - { eval $1=; unset $1;} -} -as_unset=as_fn_unset -@%:@ as_fn_append VAR VALUE -@%:@ ---------------------- -@%:@ Append the text in VALUE to the end of the definition contained in VAR. Take -@%:@ advantage of any shell optimizations that allow amortized linear growth over -@%:@ repeated appends, instead of the typical quadratic growth present in naive -@%:@ implementations. -if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then : - eval 'as_fn_append () - { - eval $1+=\$2 - }' -else - as_fn_append () - { - eval $1=\$$1\$2 - } -fi # as_fn_append - -@%:@ as_fn_arith ARG... -@%:@ ------------------ -@%:@ Perform arithmetic evaluation on the ARGs, and store the result in the -@%:@ global @S|@as_val. Take advantage of shells that can avoid forks. The arguments -@%:@ must be portable across @S|@(()) and expr. -if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then : - eval 'as_fn_arith () - { - as_val=$(( $* )) - }' -else - as_fn_arith () - { - as_val=`expr "$@" || test $? -eq 1` - } -fi # as_fn_arith - - -if expr a : '\(a\)' >/dev/null 2>&1 && - test "X`expr 00001 : '.*\(...\)'`" = X001; then - as_expr=expr -else - as_expr=false -fi - -if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then - as_basename=basename -else - as_basename=false -fi - -if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then - as_dirname=dirname -else - as_dirname=false -fi - -as_me=`$as_basename -- "$0" || -$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ - X"$0" : 'X\(//\)$' \| \ - X"$0" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X/"$0" | - sed '/^.*\/\([^/][^/]*\)\/*$/{ - s//\1/ - q - } - /^X\/\(\/\/\)$/{ - s//\1/ - q - } - /^X\/\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - -# Avoid depending upon Character Ranges. -as_cr_letters='abcdefghijklmnopqrstuvwxyz' -as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' -as_cr_Letters=$as_cr_letters$as_cr_LETTERS -as_cr_digits='0123456789' -as_cr_alnum=$as_cr_Letters$as_cr_digits - -ECHO_C= ECHO_N= ECHO_T= -case `echo -n x` in @%:@((((( --n*) - case `echo 'xy\c'` in - *c*) ECHO_T=' ';; # ECHO_T is single tab character. - xy) ECHO_C='\c';; - *) echo `echo ksh88 bug on AIX 6.1` > /dev/null - ECHO_T=' ';; - esac;; -*) - ECHO_N='-n';; -esac - -rm -f conf$$ conf$$.exe conf$$.file -if test -d conf$$.dir; then - rm -f conf$$.dir/conf$$.file -else - rm -f conf$$.dir - mkdir conf$$.dir 2>/dev/null -fi -if (echo >conf$$.file) 2>/dev/null; then - if ln -s conf$$.file conf$$ 2>/dev/null; then - as_ln_s='ln -s' - # ... but there are two gotchas: - # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. - # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. - # In both cases, we have to default to `cp -p'. - ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || - as_ln_s='cp -p' - elif ln conf$$.file conf$$ 2>/dev/null; then - as_ln_s=ln - else - as_ln_s='cp -p' - fi -else - as_ln_s='cp -p' -fi -rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file -rmdir conf$$.dir 2>/dev/null - - -@%:@ as_fn_mkdir_p -@%:@ ------------- -@%:@ Create "@S|@as_dir" as a directory, including parents if necessary. -as_fn_mkdir_p () -{ - - case $as_dir in #( - -*) as_dir=./$as_dir;; - esac - test -d "$as_dir" || eval $as_mkdir_p || { - as_dirs= - while :; do - case $as_dir in #( - *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( - *) as_qdir=$as_dir;; - esac - as_dirs="'$as_qdir' $as_dirs" - as_dir=`$as_dirname -- "$as_dir" || -$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$as_dir" : 'X\(//\)[^/]' \| \ - X"$as_dir" : 'X\(//\)$' \| \ - X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X"$as_dir" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - test -d "$as_dir" && break - done - test -z "$as_dirs" || eval "mkdir $as_dirs" - } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir" - - -} @%:@ as_fn_mkdir_p -if mkdir -p . 2>/dev/null; then - as_mkdir_p='mkdir -p "$as_dir"' -else - test -d ./-p && rmdir ./-p - as_mkdir_p=false -fi - -if test -x / >/dev/null 2>&1; then - as_test_x='test -x' -else - if ls -dL / >/dev/null 2>&1; then - as_ls_L_option=L - else - as_ls_L_option= - fi - as_test_x=' - eval sh -c '\'' - if test -d "$1"; then - test -d "$1/."; - else - case $1 in @%:@( - -*)set "./$1";; - esac; - case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in @%:@(( - ???[sx]*):;;*)false;;esac;fi - '\'' sh - ' -fi -as_executable_p=$as_test_x - -# Sed expression to map a string onto a valid CPP name. -as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" - -# Sed expression to map a string onto a valid variable name. -as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" - - -exec 6>&1 -## ----------------------------------- ## -## Main body of $CONFIG_STATUS script. ## -## ----------------------------------- ## -_ASEOF -test $as_write_fail = 0 && chmod +x $CONFIG_STATUS || ac_write_fail=1 - -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -# Save the log message, to keep $0 and so on meaningful, and to -# report actual input values of CONFIG_FILES etc. instead of their -# values after options handling. -ac_log=" -This file was extended by shairport.c $as_me 1.2.0, which was -generated by GNU Autoconf 2.68. Invocation command line was - - CONFIG_FILES = $CONFIG_FILES - CONFIG_HEADERS = $CONFIG_HEADERS - CONFIG_LINKS = $CONFIG_LINKS - CONFIG_COMMANDS = $CONFIG_COMMANDS - $ $0 $@ - -on `(hostname || uname -n) 2>/dev/null | sed 1q` -" - -_ACEOF - -case $ac_config_files in *" -"*) set x $ac_config_files; shift; ac_config_files=$*;; -esac - -case $ac_config_headers in *" -"*) set x $ac_config_headers; shift; ac_config_headers=$*;; -esac - - -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -# Files that config.status was made for. -config_files="$ac_config_files" -config_headers="$ac_config_headers" -config_commands="$ac_config_commands" - -_ACEOF - -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -ac_cs_usage="\ -\`$as_me' instantiates files and other configuration actions -from templates according to the current configuration. Unless the files -and actions are specified as TAGs, all are instantiated by default. - -Usage: $0 [OPTION]... [TAG]... - - -h, --help print this help, then exit - -V, --version print version number and configuration settings, then exit - --config print configuration, then exit - -q, --quiet, --silent - do not print progress messages - -d, --debug don't remove temporary files - --recheck update $as_me by reconfiguring in the same conditions - --file=FILE[:TEMPLATE] - instantiate the configuration file FILE - --header=FILE[:TEMPLATE] - instantiate the configuration header FILE - -Configuration files: -$config_files - -Configuration headers: -$config_headers - -Configuration commands: -$config_commands - -Report bugs to ." - -_ACEOF -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`" -ac_cs_version="\\ -shairport.c config.status 1.2.0 -configured by $0, generated by GNU Autoconf 2.68, - with options \\"\$ac_cs_config\\" - -Copyright (C) 2010 Free Software Foundation, Inc. -This config.status script is free software; the Free Software Foundation -gives unlimited permission to copy, distribute and modify it." - -ac_pwd='$ac_pwd' -srcdir='$srcdir' -INSTALL='$INSTALL' -MKDIR_P='$MKDIR_P' -AWK='$AWK' -test -n "\$AWK" || AWK=awk -_ACEOF - -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -# The default lists apply if the user does not specify any file. -ac_need_defaults=: -while test $# != 0 -do - case $1 in - --*=?*) - ac_option=`expr "X$1" : 'X\([^=]*\)='` - ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'` - ac_shift=: - ;; - --*=) - ac_option=`expr "X$1" : 'X\([^=]*\)='` - ac_optarg= - ac_shift=: - ;; - *) - ac_option=$1 - ac_optarg=$2 - ac_shift=shift - ;; - esac - - case $ac_option in - # Handling of the options. - -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) - ac_cs_recheck=: ;; - --version | --versio | --versi | --vers | --ver | --ve | --v | -V ) - $as_echo "$ac_cs_version"; exit ;; - --config | --confi | --conf | --con | --co | --c ) - $as_echo "$ac_cs_config"; exit ;; - --debug | --debu | --deb | --de | --d | -d ) - debug=: ;; - --file | --fil | --fi | --f ) - $ac_shift - case $ac_optarg in - *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; - '') as_fn_error $? "missing file argument" ;; - esac - as_fn_append CONFIG_FILES " '$ac_optarg'" - ac_need_defaults=false;; - --header | --heade | --head | --hea ) - $ac_shift - case $ac_optarg in - *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; - esac - as_fn_append CONFIG_HEADERS " '$ac_optarg'" - ac_need_defaults=false;; - --he | --h) - # Conflict between --help and --header - as_fn_error $? "ambiguous option: \`$1' -Try \`$0 --help' for more information.";; - --help | --hel | -h ) - $as_echo "$ac_cs_usage"; exit ;; - -q | -quiet | --quiet | --quie | --qui | --qu | --q \ - | -silent | --silent | --silen | --sile | --sil | --si | --s) - ac_cs_silent=: ;; - - # This is an error. - -*) as_fn_error $? "unrecognized option: \`$1' -Try \`$0 --help' for more information." ;; - - *) as_fn_append ac_config_targets " $1" - ac_need_defaults=false ;; - - esac - shift -done - -ac_configure_extra_args= - -if $ac_cs_silent; then - exec 6>/dev/null - ac_configure_extra_args="$ac_configure_extra_args --silent" -fi - -_ACEOF -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -if \$ac_cs_recheck; then - set X '$SHELL' '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion - shift - \$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6 - CONFIG_SHELL='$SHELL' - export CONFIG_SHELL - exec "\$@" -fi - -_ACEOF -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -exec 5>>config.log -{ - echo - sed 'h;s/./-/g;s/^.../@%:@@%:@ /;s/...$/ @%:@@%:@/;p;x;p;x' <<_ASBOX -@%:@@%:@ Running $as_me. @%:@@%:@ -_ASBOX - $as_echo "$ac_log" -} >&5 - -_ACEOF -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -# -# INIT-COMMANDS -# -AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir" - - -# The HP-UX ksh and POSIX shell print the target directory to stdout -# if CDPATH is set. -(unset CDPATH) >/dev/null 2>&1 && unset CDPATH - -sed_quote_subst='$sed_quote_subst' -double_quote_subst='$double_quote_subst' -delay_variable_subst='$delay_variable_subst' -enable_static='`$ECHO "$enable_static" | $SED "$delay_single_quote_subst"`' -macro_version='`$ECHO "$macro_version" | $SED "$delay_single_quote_subst"`' -macro_revision='`$ECHO "$macro_revision" | $SED "$delay_single_quote_subst"`' -enable_shared='`$ECHO "$enable_shared" | $SED "$delay_single_quote_subst"`' -pic_mode='`$ECHO "$pic_mode" | $SED "$delay_single_quote_subst"`' -enable_fast_install='`$ECHO "$enable_fast_install" | $SED "$delay_single_quote_subst"`' -SHELL='`$ECHO "$SHELL" | $SED "$delay_single_quote_subst"`' -ECHO='`$ECHO "$ECHO" | $SED "$delay_single_quote_subst"`' -host_alias='`$ECHO "$host_alias" | $SED "$delay_single_quote_subst"`' -host='`$ECHO "$host" | $SED "$delay_single_quote_subst"`' -host_os='`$ECHO "$host_os" | $SED "$delay_single_quote_subst"`' -build_alias='`$ECHO "$build_alias" | $SED "$delay_single_quote_subst"`' -build='`$ECHO "$build" | $SED "$delay_single_quote_subst"`' -build_os='`$ECHO "$build_os" | $SED "$delay_single_quote_subst"`' -SED='`$ECHO "$SED" | $SED "$delay_single_quote_subst"`' -Xsed='`$ECHO "$Xsed" | $SED "$delay_single_quote_subst"`' -GREP='`$ECHO "$GREP" | $SED "$delay_single_quote_subst"`' -EGREP='`$ECHO "$EGREP" | $SED "$delay_single_quote_subst"`' -FGREP='`$ECHO "$FGREP" | $SED "$delay_single_quote_subst"`' -LD='`$ECHO "$LD" | $SED "$delay_single_quote_subst"`' -NM='`$ECHO "$NM" | $SED "$delay_single_quote_subst"`' -LN_S='`$ECHO "$LN_S" | $SED "$delay_single_quote_subst"`' -max_cmd_len='`$ECHO "$max_cmd_len" | $SED "$delay_single_quote_subst"`' -ac_objext='`$ECHO "$ac_objext" | $SED "$delay_single_quote_subst"`' -exeext='`$ECHO "$exeext" | $SED "$delay_single_quote_subst"`' -lt_unset='`$ECHO "$lt_unset" | $SED "$delay_single_quote_subst"`' -lt_SP2NL='`$ECHO "$lt_SP2NL" | $SED "$delay_single_quote_subst"`' -lt_NL2SP='`$ECHO "$lt_NL2SP" | $SED "$delay_single_quote_subst"`' -lt_cv_to_host_file_cmd='`$ECHO "$lt_cv_to_host_file_cmd" | $SED "$delay_single_quote_subst"`' -lt_cv_to_tool_file_cmd='`$ECHO "$lt_cv_to_tool_file_cmd" | $SED "$delay_single_quote_subst"`' -reload_flag='`$ECHO "$reload_flag" | $SED "$delay_single_quote_subst"`' -reload_cmds='`$ECHO "$reload_cmds" | $SED "$delay_single_quote_subst"`' -OBJDUMP='`$ECHO "$OBJDUMP" | $SED "$delay_single_quote_subst"`' -deplibs_check_method='`$ECHO "$deplibs_check_method" | $SED "$delay_single_quote_subst"`' -file_magic_cmd='`$ECHO "$file_magic_cmd" | $SED "$delay_single_quote_subst"`' -file_magic_glob='`$ECHO "$file_magic_glob" | $SED "$delay_single_quote_subst"`' -want_nocaseglob='`$ECHO "$want_nocaseglob" | $SED "$delay_single_quote_subst"`' -DLLTOOL='`$ECHO "$DLLTOOL" | $SED "$delay_single_quote_subst"`' -sharedlib_from_linklib_cmd='`$ECHO "$sharedlib_from_linklib_cmd" | $SED "$delay_single_quote_subst"`' -AR='`$ECHO "$AR" | $SED "$delay_single_quote_subst"`' -AR_FLAGS='`$ECHO "$AR_FLAGS" | $SED "$delay_single_quote_subst"`' -archiver_list_spec='`$ECHO "$archiver_list_spec" | $SED "$delay_single_quote_subst"`' -STRIP='`$ECHO "$STRIP" | $SED "$delay_single_quote_subst"`' -RANLIB='`$ECHO "$RANLIB" | $SED "$delay_single_quote_subst"`' -old_postinstall_cmds='`$ECHO "$old_postinstall_cmds" | $SED "$delay_single_quote_subst"`' -old_postuninstall_cmds='`$ECHO "$old_postuninstall_cmds" | $SED "$delay_single_quote_subst"`' -old_archive_cmds='`$ECHO "$old_archive_cmds" | $SED "$delay_single_quote_subst"`' -lock_old_archive_extraction='`$ECHO "$lock_old_archive_extraction" | $SED "$delay_single_quote_subst"`' -CC='`$ECHO "$CC" | $SED "$delay_single_quote_subst"`' -CFLAGS='`$ECHO "$CFLAGS" | $SED "$delay_single_quote_subst"`' -compiler='`$ECHO "$compiler" | $SED "$delay_single_quote_subst"`' -GCC='`$ECHO "$GCC" | $SED "$delay_single_quote_subst"`' -lt_cv_sys_global_symbol_pipe='`$ECHO "$lt_cv_sys_global_symbol_pipe" | $SED "$delay_single_quote_subst"`' -lt_cv_sys_global_symbol_to_cdecl='`$ECHO "$lt_cv_sys_global_symbol_to_cdecl" | $SED "$delay_single_quote_subst"`' -lt_cv_sys_global_symbol_to_c_name_address='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address" | $SED "$delay_single_quote_subst"`' -lt_cv_sys_global_symbol_to_c_name_address_lib_prefix='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address_lib_prefix" | $SED "$delay_single_quote_subst"`' -nm_file_list_spec='`$ECHO "$nm_file_list_spec" | $SED "$delay_single_quote_subst"`' -lt_sysroot='`$ECHO "$lt_sysroot" | $SED "$delay_single_quote_subst"`' -objdir='`$ECHO "$objdir" | $SED "$delay_single_quote_subst"`' -MAGIC_CMD='`$ECHO "$MAGIC_CMD" | $SED "$delay_single_quote_subst"`' -lt_prog_compiler_no_builtin_flag='`$ECHO "$lt_prog_compiler_no_builtin_flag" | $SED "$delay_single_quote_subst"`' -lt_prog_compiler_pic='`$ECHO "$lt_prog_compiler_pic" | $SED "$delay_single_quote_subst"`' -lt_prog_compiler_wl='`$ECHO "$lt_prog_compiler_wl" | $SED "$delay_single_quote_subst"`' -lt_prog_compiler_static='`$ECHO "$lt_prog_compiler_static" | $SED "$delay_single_quote_subst"`' -lt_cv_prog_compiler_c_o='`$ECHO "$lt_cv_prog_compiler_c_o" | $SED "$delay_single_quote_subst"`' -need_locks='`$ECHO "$need_locks" | $SED "$delay_single_quote_subst"`' -MANIFEST_TOOL='`$ECHO "$MANIFEST_TOOL" | $SED "$delay_single_quote_subst"`' -DSYMUTIL='`$ECHO "$DSYMUTIL" | $SED "$delay_single_quote_subst"`' -NMEDIT='`$ECHO "$NMEDIT" | $SED "$delay_single_quote_subst"`' -LIPO='`$ECHO "$LIPO" | $SED "$delay_single_quote_subst"`' -OTOOL='`$ECHO "$OTOOL" | $SED "$delay_single_quote_subst"`' -OTOOL64='`$ECHO "$OTOOL64" | $SED "$delay_single_quote_subst"`' -libext='`$ECHO "$libext" | $SED "$delay_single_quote_subst"`' -shrext_cmds='`$ECHO "$shrext_cmds" | $SED "$delay_single_quote_subst"`' -extract_expsyms_cmds='`$ECHO "$extract_expsyms_cmds" | $SED "$delay_single_quote_subst"`' -archive_cmds_need_lc='`$ECHO "$archive_cmds_need_lc" | $SED "$delay_single_quote_subst"`' -enable_shared_with_static_runtimes='`$ECHO "$enable_shared_with_static_runtimes" | $SED "$delay_single_quote_subst"`' -export_dynamic_flag_spec='`$ECHO "$export_dynamic_flag_spec" | $SED "$delay_single_quote_subst"`' -whole_archive_flag_spec='`$ECHO "$whole_archive_flag_spec" | $SED "$delay_single_quote_subst"`' -compiler_needs_object='`$ECHO "$compiler_needs_object" | $SED "$delay_single_quote_subst"`' -old_archive_from_new_cmds='`$ECHO "$old_archive_from_new_cmds" | $SED "$delay_single_quote_subst"`' -old_archive_from_expsyms_cmds='`$ECHO "$old_archive_from_expsyms_cmds" | $SED "$delay_single_quote_subst"`' -archive_cmds='`$ECHO "$archive_cmds" | $SED "$delay_single_quote_subst"`' -archive_expsym_cmds='`$ECHO "$archive_expsym_cmds" | $SED "$delay_single_quote_subst"`' -module_cmds='`$ECHO "$module_cmds" | $SED "$delay_single_quote_subst"`' -module_expsym_cmds='`$ECHO "$module_expsym_cmds" | $SED "$delay_single_quote_subst"`' -with_gnu_ld='`$ECHO "$with_gnu_ld" | $SED "$delay_single_quote_subst"`' -allow_undefined_flag='`$ECHO "$allow_undefined_flag" | $SED "$delay_single_quote_subst"`' -no_undefined_flag='`$ECHO "$no_undefined_flag" | $SED "$delay_single_quote_subst"`' -hardcode_libdir_flag_spec='`$ECHO "$hardcode_libdir_flag_spec" | $SED "$delay_single_quote_subst"`' -hardcode_libdir_flag_spec_ld='`$ECHO "$hardcode_libdir_flag_spec_ld" | $SED "$delay_single_quote_subst"`' -hardcode_libdir_separator='`$ECHO "$hardcode_libdir_separator" | $SED "$delay_single_quote_subst"`' -hardcode_direct='`$ECHO "$hardcode_direct" | $SED "$delay_single_quote_subst"`' -hardcode_direct_absolute='`$ECHO "$hardcode_direct_absolute" | $SED "$delay_single_quote_subst"`' -hardcode_minus_L='`$ECHO "$hardcode_minus_L" | $SED "$delay_single_quote_subst"`' -hardcode_shlibpath_var='`$ECHO "$hardcode_shlibpath_var" | $SED "$delay_single_quote_subst"`' -hardcode_automatic='`$ECHO "$hardcode_automatic" | $SED "$delay_single_quote_subst"`' -inherit_rpath='`$ECHO "$inherit_rpath" | $SED "$delay_single_quote_subst"`' -link_all_deplibs='`$ECHO "$link_all_deplibs" | $SED "$delay_single_quote_subst"`' -always_export_symbols='`$ECHO "$always_export_symbols" | $SED "$delay_single_quote_subst"`' -export_symbols_cmds='`$ECHO "$export_symbols_cmds" | $SED "$delay_single_quote_subst"`' -exclude_expsyms='`$ECHO "$exclude_expsyms" | $SED "$delay_single_quote_subst"`' -include_expsyms='`$ECHO "$include_expsyms" | $SED "$delay_single_quote_subst"`' -prelink_cmds='`$ECHO "$prelink_cmds" | $SED "$delay_single_quote_subst"`' -postlink_cmds='`$ECHO "$postlink_cmds" | $SED "$delay_single_quote_subst"`' -file_list_spec='`$ECHO "$file_list_spec" | $SED "$delay_single_quote_subst"`' -variables_saved_for_relink='`$ECHO "$variables_saved_for_relink" | $SED "$delay_single_quote_subst"`' -need_lib_prefix='`$ECHO "$need_lib_prefix" | $SED "$delay_single_quote_subst"`' -need_version='`$ECHO "$need_version" | $SED "$delay_single_quote_subst"`' -version_type='`$ECHO "$version_type" | $SED "$delay_single_quote_subst"`' -runpath_var='`$ECHO "$runpath_var" | $SED "$delay_single_quote_subst"`' -shlibpath_var='`$ECHO "$shlibpath_var" | $SED "$delay_single_quote_subst"`' -shlibpath_overrides_runpath='`$ECHO "$shlibpath_overrides_runpath" | $SED "$delay_single_quote_subst"`' -libname_spec='`$ECHO "$libname_spec" | $SED "$delay_single_quote_subst"`' -library_names_spec='`$ECHO "$library_names_spec" | $SED "$delay_single_quote_subst"`' -soname_spec='`$ECHO "$soname_spec" | $SED "$delay_single_quote_subst"`' -install_override_mode='`$ECHO "$install_override_mode" | $SED "$delay_single_quote_subst"`' -postinstall_cmds='`$ECHO "$postinstall_cmds" | $SED "$delay_single_quote_subst"`' -postuninstall_cmds='`$ECHO "$postuninstall_cmds" | $SED "$delay_single_quote_subst"`' -finish_cmds='`$ECHO "$finish_cmds" | $SED "$delay_single_quote_subst"`' -finish_eval='`$ECHO "$finish_eval" | $SED "$delay_single_quote_subst"`' -hardcode_into_libs='`$ECHO "$hardcode_into_libs" | $SED "$delay_single_quote_subst"`' -sys_lib_search_path_spec='`$ECHO "$sys_lib_search_path_spec" | $SED "$delay_single_quote_subst"`' -sys_lib_dlsearch_path_spec='`$ECHO "$sys_lib_dlsearch_path_spec" | $SED "$delay_single_quote_subst"`' -hardcode_action='`$ECHO "$hardcode_action" | $SED "$delay_single_quote_subst"`' -enable_dlopen='`$ECHO "$enable_dlopen" | $SED "$delay_single_quote_subst"`' -enable_dlopen_self='`$ECHO "$enable_dlopen_self" | $SED "$delay_single_quote_subst"`' -enable_dlopen_self_static='`$ECHO "$enable_dlopen_self_static" | $SED "$delay_single_quote_subst"`' -old_striplib='`$ECHO "$old_striplib" | $SED "$delay_single_quote_subst"`' -striplib='`$ECHO "$striplib" | $SED "$delay_single_quote_subst"`' - -LTCC='$LTCC' -LTCFLAGS='$LTCFLAGS' -compiler='$compiler_DEFAULT' - -# A function that is used when there is no print builtin or printf. -func_fallback_echo () -{ - eval 'cat <<_LTECHO_EOF -\$1 -_LTECHO_EOF' -} - -# Quote evaled strings. -for var in SHELL \ -ECHO \ -SED \ -GREP \ -EGREP \ -FGREP \ -LD \ -NM \ -LN_S \ -lt_SP2NL \ -lt_NL2SP \ -reload_flag \ -OBJDUMP \ -deplibs_check_method \ -file_magic_cmd \ -file_magic_glob \ -want_nocaseglob \ -DLLTOOL \ -sharedlib_from_linklib_cmd \ -AR \ -AR_FLAGS \ -archiver_list_spec \ -STRIP \ -RANLIB \ -CC \ -CFLAGS \ -compiler \ -lt_cv_sys_global_symbol_pipe \ -lt_cv_sys_global_symbol_to_cdecl \ -lt_cv_sys_global_symbol_to_c_name_address \ -lt_cv_sys_global_symbol_to_c_name_address_lib_prefix \ -nm_file_list_spec \ -lt_prog_compiler_no_builtin_flag \ -lt_prog_compiler_pic \ -lt_prog_compiler_wl \ -lt_prog_compiler_static \ -lt_cv_prog_compiler_c_o \ -need_locks \ -MANIFEST_TOOL \ -DSYMUTIL \ -NMEDIT \ -LIPO \ -OTOOL \ -OTOOL64 \ -shrext_cmds \ -export_dynamic_flag_spec \ -whole_archive_flag_spec \ -compiler_needs_object \ -with_gnu_ld \ -allow_undefined_flag \ -no_undefined_flag \ -hardcode_libdir_flag_spec \ -hardcode_libdir_flag_spec_ld \ -hardcode_libdir_separator \ -exclude_expsyms \ -include_expsyms \ -file_list_spec \ -variables_saved_for_relink \ -libname_spec \ -library_names_spec \ -soname_spec \ -install_override_mode \ -finish_eval \ -old_striplib \ -striplib; do - case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in - *[\\\\\\\`\\"\\\$]*) - eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED \\"\\\$sed_quote_subst\\"\\\`\\\\\\"" - ;; - *) - eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\"" - ;; - esac -done - -# Double-quote double-evaled strings. -for var in reload_cmds \ -old_postinstall_cmds \ -old_postuninstall_cmds \ -old_archive_cmds \ -extract_expsyms_cmds \ -old_archive_from_new_cmds \ -old_archive_from_expsyms_cmds \ -archive_cmds \ -archive_expsym_cmds \ -module_cmds \ -module_expsym_cmds \ -export_symbols_cmds \ -prelink_cmds \ -postlink_cmds \ -postinstall_cmds \ -postuninstall_cmds \ -finish_cmds \ -sys_lib_search_path_spec \ -sys_lib_dlsearch_path_spec; do - case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in - *[\\\\\\\`\\"\\\$]*) - eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\"" - ;; - *) - eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\"" - ;; - esac -done - -ac_aux_dir='$ac_aux_dir' -xsi_shell='$xsi_shell' -lt_shell_append='$lt_shell_append' - -# See if we are running on zsh, and set the options which allow our -# commands through without removal of \ escapes INIT. -if test -n "\${ZSH_VERSION+set}" ; then - setopt NO_GLOB_SUBST -fi - - - PACKAGE='$PACKAGE' - VERSION='$VERSION' - TIMESTAMP='$TIMESTAMP' - RM='$RM' - ofile='$ofile' - - - - -_ACEOF - -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 - -# Handling of arguments. -for ac_config_target in $ac_config_targets -do - case $ac_config_target in - "config.h") CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;; - "depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;; - "libtool") CONFIG_COMMANDS="$CONFIG_COMMANDS libtool" ;; - "${OUTPUT_FILES}") CONFIG_FILES="$CONFIG_FILES ${OUTPUT_FILES}" ;; - "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;; - "src/Makefile") CONFIG_FILES="$CONFIG_FILES src/Makefile" ;; - - *) as_fn_error $? "invalid argument: \`$ac_config_target'" "$LINENO" 5;; - esac -done - - -# If the user did not use the arguments to specify the items to instantiate, -# then the envvar interface is used. Set only those that are not. -# We use the long form for the default assignment because of an extremely -# bizarre bug on SunOS 4.1.3. -if $ac_need_defaults; then - test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files - test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers - test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands -fi - -# Have a temporary directory for convenience. Make it in the build tree -# simply because there is no reason against having it here, and in addition, -# creating and moving files from /tmp can sometimes cause problems. -# Hook for its removal unless debugging. -# Note that there is a small window in which the directory will not be cleaned: -# after its creation but before its name has been assigned to `$tmp'. -$debug || -{ - tmp= ac_tmp= - trap 'exit_status=$? - : "${ac_tmp:=$tmp}" - { test ! -d "$ac_tmp" || rm -fr "$ac_tmp"; } && exit $exit_status -' 0 - trap 'as_fn_exit 1' 1 2 13 15 -} -# Create a (secure) tmp directory for tmp files. - -{ - tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` && - test -d "$tmp" -} || -{ - tmp=./conf$$-$RANDOM - (umask 077 && mkdir "$tmp") -} || as_fn_error $? "cannot create a temporary directory in ." "$LINENO" 5 -ac_tmp=$tmp - -# Set up the scripts for CONFIG_FILES section. -# No need to generate them if there are no CONFIG_FILES. -# This happens for instance with `./config.status config.h'. -if test -n "$CONFIG_FILES"; then - - -ac_cr=`echo X | tr X '\015'` -# On cygwin, bash can eat \r inside `` if the user requested igncr. -# But we know of no other shell where ac_cr would be empty at this -# point, so we can use a bashism as a fallback. -if test "x$ac_cr" = x; then - eval ac_cr=\$\'\\r\' -fi -ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' /dev/null` -if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then - ac_cs_awk_cr='\\r' -else - ac_cs_awk_cr=$ac_cr -fi - -echo 'BEGIN {' >"$ac_tmp/subs1.awk" && -_ACEOF - - -{ - echo "cat >conf$$subs.awk <<_ACEOF" && - echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' && - echo "_ACEOF" -} >conf$$subs.sh || - as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 -ac_delim_num=`echo "$ac_subst_vars" | grep -c '^'` -ac_delim='%!_!# ' -for ac_last_try in false false false false false :; do - . ./conf$$subs.sh || - as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 - - ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X` - if test $ac_delim_n = $ac_delim_num; then - break - elif $ac_last_try; then - as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 - else - ac_delim="$ac_delim!$ac_delim _$ac_delim!! " - fi -done -rm -f conf$$subs.sh - -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -cat >>"\$ac_tmp/subs1.awk" <<\\_ACAWK && -_ACEOF -sed -n ' -h -s/^/S["/; s/!.*/"]=/ -p -g -s/^[^!]*!// -:repl -t repl -s/'"$ac_delim"'$// -t delim -:nl -h -s/\(.\{148\}\)..*/\1/ -t more1 -s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/ -p -n -b repl -:more1 -s/["\\]/\\&/g; s/^/"/; s/$/"\\/ -p -g -s/.\{148\}// -t nl -:delim -h -s/\(.\{148\}\)..*/\1/ -t more2 -s/["\\]/\\&/g; s/^/"/; s/$/"/ -p -b -:more2 -s/["\\]/\\&/g; s/^/"/; s/$/"\\/ -p -g -s/.\{148\}// -t delim -' >$CONFIG_STATUS || ac_write_fail=1 -rm -f conf$$subs.awk -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -_ACAWK -cat >>"\$ac_tmp/subs1.awk" <<_ACAWK && - for (key in S) S_is_set[key] = 1 - FS = "" - -} -{ - line = $ 0 - nfields = split(line, field, "@") - substed = 0 - len = length(field[1]) - for (i = 2; i < nfields; i++) { - key = field[i] - keylen = length(key) - if (S_is_set[key]) { - value = S[key] - line = substr(line, 1, len) "" value "" substr(line, len + keylen + 3) - len += length(value) + length(field[++i]) - substed = 1 - } else - len += 1 + keylen - } - - print line -} - -_ACAWK -_ACEOF -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then - sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g" -else - cat -fi < "$ac_tmp/subs1.awk" > "$ac_tmp/subs.awk" \ - || as_fn_error $? "could not setup config files machinery" "$LINENO" 5 -_ACEOF - -# VPATH may cause trouble with some makes, so we remove sole $(srcdir), -# ${srcdir} and @srcdir@ entries from VPATH if srcdir is ".", strip leading and -# trailing colons and then remove the whole line if VPATH becomes empty -# (actually we leave an empty line to preserve line numbers). -if test "x$srcdir" = x.; then - ac_vpsub='/^[ ]*VPATH[ ]*=[ ]*/{ -h -s/// -s/^/:/ -s/[ ]*$/:/ -s/:\$(srcdir):/:/g -s/:\${srcdir}:/:/g -s/:@srcdir@:/:/g -s/^:*// -s/:*$// -x -s/\(=[ ]*\).*/\1/ -G -s/\n// -s/^[^=]*=[ ]*$// -}' -fi - -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -fi # test -n "$CONFIG_FILES" - -# Set up the scripts for CONFIG_HEADERS section. -# No need to generate them if there are no CONFIG_HEADERS. -# This happens for instance with `./config.status Makefile'. -if test -n "$CONFIG_HEADERS"; then -cat >"$ac_tmp/defines.awk" <<\_ACAWK || -BEGIN { -_ACEOF - -# Transform confdefs.h into an awk script `defines.awk', embedded as -# here-document in config.status, that substitutes the proper values into -# config.h.in to produce config.h. - -# Create a delimiter string that does not exist in confdefs.h, to ease -# handling of long lines. -ac_delim='%!_!# ' -for ac_last_try in false false :; do - ac_tt=`sed -n "/$ac_delim/p" confdefs.h` - if test -z "$ac_tt"; then - break - elif $ac_last_try; then - as_fn_error $? "could not make $CONFIG_HEADERS" "$LINENO" 5 - else - ac_delim="$ac_delim!$ac_delim _$ac_delim!! " - fi -done - -# For the awk script, D is an array of macro values keyed by name, -# likewise P contains macro parameters if any. Preserve backslash -# newline sequences. - -ac_word_re=[_$as_cr_Letters][_$as_cr_alnum]* -sed -n ' -s/.\{148\}/&'"$ac_delim"'/g -t rset -:rset -s/^[ ]*#[ ]*define[ ][ ]*/ / -t def -d -:def -s/\\$// -t bsnl -s/["\\]/\\&/g -s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\ -D["\1"]=" \3"/p -s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2"/p -d -:bsnl -s/["\\]/\\&/g -s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\ -D["\1"]=" \3\\\\\\n"\\/p -t cont -s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2\\\\\\n"\\/p -t cont -d -:cont -n -s/.\{148\}/&'"$ac_delim"'/g -t clear -:clear -s/\\$// -t bsnlc -s/["\\]/\\&/g; s/^/"/; s/$/"/p -d -:bsnlc -s/["\\]/\\&/g; s/^/"/; s/$/\\\\\\n"\\/p -b cont -' >$CONFIG_STATUS || ac_write_fail=1 - -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 - for (key in D) D_is_set[key] = 1 - FS = "" -} -/^[\t ]*#[\t ]*(define|undef)[\t ]+$ac_word_re([\t (]|\$)/ { - line = \$ 0 - split(line, arg, " ") - if (arg[1] == "#") { - defundef = arg[2] - mac1 = arg[3] - } else { - defundef = substr(arg[1], 2) - mac1 = arg[2] - } - split(mac1, mac2, "(") #) - macro = mac2[1] - prefix = substr(line, 1, index(line, defundef) - 1) - if (D_is_set[macro]) { - # Preserve the white space surrounding the "#". - print prefix "define", macro P[macro] D[macro] - next - } else { - # Replace #undef with comments. This is necessary, for example, - # in the case of _POSIX_SOURCE, which is predefined and required - # on some systems where configure will not decide to define it. - if (defundef == "undef") { - print "/*", prefix defundef, macro, "*/" - next - } - } -} -{ print } -_ACAWK -_ACEOF -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 - as_fn_error $? "could not setup config headers machinery" "$LINENO" 5 -fi # test -n "$CONFIG_HEADERS" - - -eval set X " :F $CONFIG_FILES :H $CONFIG_HEADERS :C $CONFIG_COMMANDS" -shift -for ac_tag -do - case $ac_tag in - :[FHLC]) ac_mode=$ac_tag; continue;; - esac - case $ac_mode$ac_tag in - :[FHL]*:*);; - :L* | :C*:*) as_fn_error $? "invalid tag \`$ac_tag'" "$LINENO" 5;; - :[FH]-) ac_tag=-:-;; - :[FH]*) ac_tag=$ac_tag:$ac_tag.in;; - esac - ac_save_IFS=$IFS - IFS=: - set x $ac_tag - IFS=$ac_save_IFS - shift - ac_file=$1 - shift - - case $ac_mode in - :L) ac_source=$1;; - :[FH]) - ac_file_inputs= - for ac_f - do - case $ac_f in - -) ac_f="$ac_tmp/stdin";; - *) # Look for the file first in the build tree, then in the source tree - # (if the path is not absolute). The absolute path cannot be DOS-style, - # because $ac_f cannot contain `:'. - test -f "$ac_f" || - case $ac_f in - [\\/$]*) false;; - *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";; - esac || - as_fn_error 1 "cannot find input file: \`$ac_f'" "$LINENO" 5;; - esac - case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac - as_fn_append ac_file_inputs " '$ac_f'" - done - - # Let's still pretend it is `configure' which instantiates (i.e., don't - # use $as_me), people would be surprised to read: - # /* config.h. Generated by config.status. */ - configure_input='Generated from '` - $as_echo "$*" | sed 's|^[^:]*/||;s|:[^:]*/|, |g' - `' by configure.' - if test x"$ac_file" != x-; then - configure_input="$ac_file. $configure_input" - { $as_echo "$as_me:${as_lineno-$LINENO}: creating $ac_file" >&5 -$as_echo "$as_me: creating $ac_file" >&6;} - fi - # Neutralize special characters interpreted by sed in replacement strings. - case $configure_input in #( - *\&* | *\|* | *\\* ) - ac_sed_conf_input=`$as_echo "$configure_input" | - sed 's/[\\\\&|]/\\\\&/g'`;; #( - *) ac_sed_conf_input=$configure_input;; - esac - - case $ac_tag in - *:-:* | *:-) cat >"$ac_tmp/stdin" \ - || as_fn_error $? "could not create $ac_file" "$LINENO" 5 ;; - esac - ;; - esac - - ac_dir=`$as_dirname -- "$ac_file" || -$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$ac_file" : 'X\(//\)[^/]' \| \ - X"$ac_file" : 'X\(//\)$' \| \ - X"$ac_file" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X"$ac_file" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - as_dir="$ac_dir"; as_fn_mkdir_p - ac_builddir=. - -case "$ac_dir" in -.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; -*) - ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'` - # A ".." for each directory in $ac_dir_suffix. - ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` - case $ac_top_builddir_sub in - "") ac_top_builddir_sub=. ac_top_build_prefix= ;; - *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; - esac ;; -esac -ac_abs_top_builddir=$ac_pwd -ac_abs_builddir=$ac_pwd$ac_dir_suffix -# for backward compatibility: -ac_top_builddir=$ac_top_build_prefix - -case $srcdir in - .) # We are building in place. - ac_srcdir=. - ac_top_srcdir=$ac_top_builddir_sub - ac_abs_top_srcdir=$ac_pwd ;; - [\\/]* | ?:[\\/]* ) # Absolute name. - ac_srcdir=$srcdir$ac_dir_suffix; - ac_top_srcdir=$srcdir - ac_abs_top_srcdir=$srcdir ;; - *) # Relative name. - ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix - ac_top_srcdir=$ac_top_build_prefix$srcdir - ac_abs_top_srcdir=$ac_pwd/$srcdir ;; -esac -ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix - - - case $ac_mode in - :F) - # - # CONFIG_FILE - # - - case $INSTALL in - [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;; - *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;; - esac - ac_MKDIR_P=$MKDIR_P - case $MKDIR_P in - [\\/$]* | ?:[\\/]* ) ;; - */*) ac_MKDIR_P=$ac_top_build_prefix$MKDIR_P ;; - esac -_ACEOF - -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -# If the template does not know about datarootdir, expand it. -# FIXME: This hack should be removed a few years after 2.60. -ac_datarootdir_hack=; ac_datarootdir_seen= -ac_sed_dataroot=' -/datarootdir/ { - p - q -} -/@datadir@/p -/@docdir@/p -/@infodir@/p -/@localedir@/p -/@mandir@/p' -case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in -*datarootdir*) ac_datarootdir_seen=yes;; -*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*) - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5 -$as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;} -_ACEOF -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 - ac_datarootdir_hack=' - s&@datadir@&$datadir&g - s&@docdir@&$docdir&g - s&@infodir@&$infodir&g - s&@localedir@&$localedir&g - s&@mandir@&$mandir&g - s&\\\${datarootdir}&$datarootdir&g' ;; -esac -_ACEOF - -# Neutralize VPATH when `$srcdir' = `.'. -# Shell code in configure.ac might set extrasub. -# FIXME: do we really want to maintain this feature? -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -ac_sed_extra="$ac_vpsub -$extrasub -_ACEOF -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -:t -/@[a-zA-Z_][a-zA-Z_0-9]*@/!b -s|@configure_input@|$ac_sed_conf_input|;t t -s&@top_builddir@&$ac_top_builddir_sub&;t t -s&@top_build_prefix@&$ac_top_build_prefix&;t t -s&@srcdir@&$ac_srcdir&;t t -s&@abs_srcdir@&$ac_abs_srcdir&;t t -s&@top_srcdir@&$ac_top_srcdir&;t t -s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t -s&@builddir@&$ac_builddir&;t t -s&@abs_builddir@&$ac_abs_builddir&;t t -s&@abs_top_builddir@&$ac_abs_top_builddir&;t t -s&@INSTALL@&$ac_INSTALL&;t t -s&@MKDIR_P@&$ac_MKDIR_P&;t t -$ac_datarootdir_hack -" -eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$ac_tmp/subs.awk" \ - >$ac_tmp/out || as_fn_error $? "could not create $ac_file" "$LINENO" 5 - -test -z "$ac_datarootdir_hack$ac_datarootdir_seen" && - { ac_out=`sed -n '/\${datarootdir}/p' "$ac_tmp/out"`; test -n "$ac_out"; } && - { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' \ - "$ac_tmp/out"`; test -z "$ac_out"; } && - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a reference to the variable \`datarootdir' -which seems to be undefined. Please make sure it is defined" >&5 -$as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir' -which seems to be undefined. Please make sure it is defined" >&2;} - - rm -f "$ac_tmp/stdin" - case $ac_file in - -) cat "$ac_tmp/out" && rm -f "$ac_tmp/out";; - *) rm -f "$ac_file" && mv "$ac_tmp/out" "$ac_file";; - esac \ - || as_fn_error $? "could not create $ac_file" "$LINENO" 5 - ;; - :H) - # - # CONFIG_HEADER - # - if test x"$ac_file" != x-; then - { - $as_echo "/* $configure_input */" \ - && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs" - } >"$ac_tmp/config.h" \ - || as_fn_error $? "could not create $ac_file" "$LINENO" 5 - if diff "$ac_file" "$ac_tmp/config.h" >/dev/null 2>&1; then - { $as_echo "$as_me:${as_lineno-$LINENO}: $ac_file is unchanged" >&5 -$as_echo "$as_me: $ac_file is unchanged" >&6;} - else - rm -f "$ac_file" - mv "$ac_tmp/config.h" "$ac_file" \ - || as_fn_error $? "could not create $ac_file" "$LINENO" 5 - fi - else - $as_echo "/* $configure_input */" \ - && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs" \ - || as_fn_error $? "could not create -" "$LINENO" 5 - fi -# Compute "$ac_file"'s index in $config_headers. -_am_arg="$ac_file" -_am_stamp_count=1 -for _am_header in $config_headers :; do - case $_am_header in - $_am_arg | $_am_arg:* ) - break ;; - * ) - _am_stamp_count=`expr $_am_stamp_count + 1` ;; - esac -done -echo "timestamp for $_am_arg" >`$as_dirname -- "$_am_arg" || -$as_expr X"$_am_arg" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$_am_arg" : 'X\(//\)[^/]' \| \ - X"$_am_arg" : 'X\(//\)$' \| \ - X"$_am_arg" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X"$_am_arg" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'`/stamp-h$_am_stamp_count - ;; - - :C) { $as_echo "$as_me:${as_lineno-$LINENO}: executing $ac_file commands" >&5 -$as_echo "$as_me: executing $ac_file commands" >&6;} - ;; - esac - - - case $ac_file$ac_mode in - "depfiles":C) test x"$AMDEP_TRUE" != x"" || { - # Autoconf 2.62 quotes --file arguments for eval, but not when files - # are listed without --file. Let's play safe and only enable the eval - # if we detect the quoting. - case $CONFIG_FILES in - *\'*) eval set x "$CONFIG_FILES" ;; - *) set x $CONFIG_FILES ;; - esac - shift - for mf - do - # Strip MF so we end up with the name of the file. - mf=`echo "$mf" | sed -e 's/:.*$//'` - # Check whether this is an Automake generated Makefile or not. - # We used to match only the files named `Makefile.in', but - # some people rename them; so instead we look at the file content. - # Grep'ing the first line is not enough: some people post-process - # each Makefile.in and add a new line on top of each file to say so. - # Grep'ing the whole file is not good either: AIX grep has a line - # limit of 2048, but all sed's we know have understand at least 4000. - if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then - dirpart=`$as_dirname -- "$mf" || -$as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$mf" : 'X\(//\)[^/]' \| \ - X"$mf" : 'X\(//\)$' \| \ - X"$mf" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X"$mf" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - else - continue - fi - # Extract the definition of DEPDIR, am__include, and am__quote - # from the Makefile without running `make'. - DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` - test -z "$DEPDIR" && continue - am__include=`sed -n 's/^am__include = //p' < "$mf"` - test -z "am__include" && continue - am__quote=`sed -n 's/^am__quote = //p' < "$mf"` - # When using ansi2knr, U may be empty or an underscore; expand it - U=`sed -n 's/^U = //p' < "$mf"` - # Find all dependency output files, they are included files with - # $(DEPDIR) in their names. We invoke sed twice because it is the - # simplest approach to changing $(DEPDIR) to its actual value in the - # expansion. - for file in `sed -n " - s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ - sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do - # Make sure the directory exists. - test -f "$dirpart/$file" && continue - fdir=`$as_dirname -- "$file" || -$as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$file" : 'X\(//\)[^/]' \| \ - X"$file" : 'X\(//\)$' \| \ - X"$file" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X"$file" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - as_dir=$dirpart/$fdir; as_fn_mkdir_p - # echo "creating $dirpart/$file" - echo '# dummy' > "$dirpart/$file" - done - done -} - ;; - "libtool":C) - - # See if we are running on zsh, and set the options which allow our - # commands through without removal of \ escapes. - if test -n "${ZSH_VERSION+set}" ; then - setopt NO_GLOB_SUBST - fi - - cfgfile="${ofile}T" - trap "$RM \"$cfgfile\"; exit 1" 1 2 15 - $RM "$cfgfile" - - cat <<_LT_EOF >> "$cfgfile" -#! $SHELL - -# `$ECHO "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services. -# Generated automatically by $as_me ($PACKAGE$TIMESTAMP) $VERSION -# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: -# NOTE: Changes made to this file will be lost: look at ltmain.sh. -# -# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, -# 2006, 2007, 2008, 2009, 2010 Free Software Foundation, -# Inc. -# Written by Gordon Matzigkeit, 1996 -# -# This file is part of GNU Libtool. -# -# GNU Libtool is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# As a special exception to the GNU General Public License, -# if you distribute this file as part of a program or library that -# is built using GNU Libtool, you may include this file under the -# same distribution terms that you use for the rest of that program. -# -# GNU Libtool is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with GNU Libtool; see the file COPYING. If not, a copy -# can be downloaded from http://www.gnu.org/licenses/gpl.html, or -# obtained by writing to the Free Software Foundation, Inc., -# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. - - -# The names of the tagged configurations supported by this script. -available_tags="" - -# ### BEGIN LIBTOOL CONFIG - -# Whether or not to build static libraries. -build_old_libs=$enable_static - -# Which release of libtool.m4 was used? -macro_version=$macro_version -macro_revision=$macro_revision - -# Whether or not to build shared libraries. -build_libtool_libs=$enable_shared - -# What type of objects to build. -pic_mode=$pic_mode - -# Whether or not to optimize for fast installation. -fast_install=$enable_fast_install - -# Shell to use when invoking shell scripts. -SHELL=$lt_SHELL - -# An echo program that protects backslashes. -ECHO=$lt_ECHO - -# The host system. -host_alias=$host_alias -host=$host -host_os=$host_os - -# The build system. -build_alias=$build_alias -build=$build -build_os=$build_os - -# A sed program that does not truncate output. -SED=$lt_SED - -# Sed that helps us avoid accidentally triggering echo(1) options like -n. -Xsed="\$SED -e 1s/^X//" - -# A grep program that handles long lines. -GREP=$lt_GREP - -# An ERE matcher. -EGREP=$lt_EGREP - -# A literal string matcher. -FGREP=$lt_FGREP - -# A BSD- or MS-compatible name lister. -NM=$lt_NM - -# Whether we need soft or hard links. -LN_S=$lt_LN_S - -# What is the maximum length of a command? -max_cmd_len=$max_cmd_len - -# Object file suffix (normally "o"). -objext=$ac_objext - -# Executable file suffix (normally ""). -exeext=$exeext - -# whether the shell understands "unset". -lt_unset=$lt_unset - -# turn spaces into newlines. -SP2NL=$lt_lt_SP2NL - -# turn newlines into spaces. -NL2SP=$lt_lt_NL2SP - -# convert \$build file names to \$host format. -to_host_file_cmd=$lt_cv_to_host_file_cmd - -# convert \$build files to toolchain format. -to_tool_file_cmd=$lt_cv_to_tool_file_cmd - -# An object symbol dumper. -OBJDUMP=$lt_OBJDUMP - -# Method to check whether dependent libraries are shared objects. -deplibs_check_method=$lt_deplibs_check_method - -# Command to use when deplibs_check_method = "file_magic". -file_magic_cmd=$lt_file_magic_cmd - -# How to find potential files when deplibs_check_method = "file_magic". -file_magic_glob=$lt_file_magic_glob - -# Find potential files using nocaseglob when deplibs_check_method = "file_magic". -want_nocaseglob=$lt_want_nocaseglob - -# DLL creation program. -DLLTOOL=$lt_DLLTOOL - -# Command to associate shared and link libraries. -sharedlib_from_linklib_cmd=$lt_sharedlib_from_linklib_cmd - -# The archiver. -AR=$lt_AR - -# Flags to create an archive. -AR_FLAGS=$lt_AR_FLAGS - -# How to feed a file listing to the archiver. -archiver_list_spec=$lt_archiver_list_spec - -# A symbol stripping program. -STRIP=$lt_STRIP - -# Commands used to install an old-style archive. -RANLIB=$lt_RANLIB -old_postinstall_cmds=$lt_old_postinstall_cmds -old_postuninstall_cmds=$lt_old_postuninstall_cmds - -# Whether to use a lock for old archive extraction. -lock_old_archive_extraction=$lock_old_archive_extraction - -# A C compiler. -LTCC=$lt_CC - -# LTCC compiler flags. -LTCFLAGS=$lt_CFLAGS - -# Take the output of nm and produce a listing of raw symbols and C names. -global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe - -# Transform the output of nm in a proper C declaration. -global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl - -# Transform the output of nm in a C name address pair. -global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address - -# Transform the output of nm in a C name address pair when lib prefix is needed. -global_symbol_to_c_name_address_lib_prefix=$lt_lt_cv_sys_global_symbol_to_c_name_address_lib_prefix - -# Specify filename containing input files for \$NM. -nm_file_list_spec=$lt_nm_file_list_spec - -# The root where to search for dependent libraries,and in which our libraries should be installed. -lt_sysroot=$lt_sysroot - -# The name of the directory that contains temporary libtool files. -objdir=$objdir - -# Used to examine libraries when file_magic_cmd begins with "file". -MAGIC_CMD=$MAGIC_CMD - -# Must we lock files when doing compilation? -need_locks=$lt_need_locks - -# Manifest tool. -MANIFEST_TOOL=$lt_MANIFEST_TOOL - -# Tool to manipulate archived DWARF debug symbol files on Mac OS X. -DSYMUTIL=$lt_DSYMUTIL - -# Tool to change global to local symbols on Mac OS X. -NMEDIT=$lt_NMEDIT - -# Tool to manipulate fat objects and archives on Mac OS X. -LIPO=$lt_LIPO - -# ldd/readelf like tool for Mach-O binaries on Mac OS X. -OTOOL=$lt_OTOOL - -# ldd/readelf like tool for 64 bit Mach-O binaries on Mac OS X 10.4. -OTOOL64=$lt_OTOOL64 - -# Old archive suffix (normally "a"). -libext=$libext - -# Shared library suffix (normally ".so"). -shrext_cmds=$lt_shrext_cmds - -# The commands to extract the exported symbol list from a shared archive. -extract_expsyms_cmds=$lt_extract_expsyms_cmds - -# Variables whose values should be saved in libtool wrapper scripts and -# restored at link time. -variables_saved_for_relink=$lt_variables_saved_for_relink - -# Do we need the "lib" prefix for modules? -need_lib_prefix=$need_lib_prefix - -# Do we need a version for libraries? -need_version=$need_version - -# Library versioning type. -version_type=$version_type - -# Shared library runtime path variable. -runpath_var=$runpath_var - -# Shared library path variable. -shlibpath_var=$shlibpath_var - -# Is shlibpath searched before the hard-coded library search path? -shlibpath_overrides_runpath=$shlibpath_overrides_runpath - -# Format of library name prefix. -libname_spec=$lt_libname_spec - -# List of archive names. First name is the real one, the rest are links. -# The last name is the one that the linker finds with -lNAME -library_names_spec=$lt_library_names_spec - -# The coded name of the library, if different from the real name. -soname_spec=$lt_soname_spec - -# Permission mode override for installation of shared libraries. -install_override_mode=$lt_install_override_mode - -# Command to use after installation of a shared archive. -postinstall_cmds=$lt_postinstall_cmds - -# Command to use after uninstallation of a shared archive. -postuninstall_cmds=$lt_postuninstall_cmds - -# Commands used to finish a libtool library installation in a directory. -finish_cmds=$lt_finish_cmds - -# As "finish_cmds", except a single script fragment to be evaled but -# not shown. -finish_eval=$lt_finish_eval - -# Whether we should hardcode library paths into libraries. -hardcode_into_libs=$hardcode_into_libs - -# Compile-time system search path for libraries. -sys_lib_search_path_spec=$lt_sys_lib_search_path_spec - -# Run-time system search path for libraries. -sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec - -# Whether dlopen is supported. -dlopen_support=$enable_dlopen - -# Whether dlopen of programs is supported. -dlopen_self=$enable_dlopen_self - -# Whether dlopen of statically linked programs is supported. -dlopen_self_static=$enable_dlopen_self_static - -# Commands to strip libraries. -old_striplib=$lt_old_striplib -striplib=$lt_striplib - - -# The linker used to build libraries. -LD=$lt_LD - -# How to create reloadable object files. -reload_flag=$lt_reload_flag -reload_cmds=$lt_reload_cmds - -# Commands used to build an old-style archive. -old_archive_cmds=$lt_old_archive_cmds - -# A language specific compiler. -CC=$lt_compiler - -# Is the compiler the GNU compiler? -with_gcc=$GCC - -# Compiler flag to turn off builtin functions. -no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag - -# Additional compiler flags for building library objects. -pic_flag=$lt_lt_prog_compiler_pic - -# How to pass a linker flag through the compiler. -wl=$lt_lt_prog_compiler_wl - -# Compiler flag to prevent dynamic linking. -link_static_flag=$lt_lt_prog_compiler_static - -# Does compiler simultaneously support -c and -o options? -compiler_c_o=$lt_lt_cv_prog_compiler_c_o - -# Whether or not to add -lc for building shared libraries. -build_libtool_need_lc=$archive_cmds_need_lc - -# Whether or not to disallow shared libs when runtime libs are static. -allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes - -# Compiler flag to allow reflexive dlopens. -export_dynamic_flag_spec=$lt_export_dynamic_flag_spec - -# Compiler flag to generate shared objects directly from archives. -whole_archive_flag_spec=$lt_whole_archive_flag_spec - -# Whether the compiler copes with passing no objects directly. -compiler_needs_object=$lt_compiler_needs_object - -# Create an old-style archive from a shared archive. -old_archive_from_new_cmds=$lt_old_archive_from_new_cmds - -# Create a temporary old-style archive to link instead of a shared archive. -old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds - -# Commands used to build a shared archive. -archive_cmds=$lt_archive_cmds -archive_expsym_cmds=$lt_archive_expsym_cmds - -# Commands used to build a loadable module if different from building -# a shared archive. -module_cmds=$lt_module_cmds -module_expsym_cmds=$lt_module_expsym_cmds - -# Whether we are building with GNU ld or not. -with_gnu_ld=$lt_with_gnu_ld - -# Flag that allows shared libraries with undefined symbols to be built. -allow_undefined_flag=$lt_allow_undefined_flag - -# Flag that enforces no undefined symbols. -no_undefined_flag=$lt_no_undefined_flag - -# Flag to hardcode \$libdir into a binary during linking. -# This must work even if \$libdir does not exist -hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec - -# If ld is used when linking, flag to hardcode \$libdir into a binary -# during linking. This must work even if \$libdir does not exist. -hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld - -# Whether we need a single "-rpath" flag with a separated argument. -hardcode_libdir_separator=$lt_hardcode_libdir_separator - -# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes -# DIR into the resulting binary. -hardcode_direct=$hardcode_direct - -# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes -# DIR into the resulting binary and the resulting library dependency is -# "absolute",i.e impossible to change by setting \${shlibpath_var} if the -# library is relocated. -hardcode_direct_absolute=$hardcode_direct_absolute - -# Set to "yes" if using the -LDIR flag during linking hardcodes DIR -# into the resulting binary. -hardcode_minus_L=$hardcode_minus_L - -# Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR -# into the resulting binary. -hardcode_shlibpath_var=$hardcode_shlibpath_var - -# Set to "yes" if building a shared library automatically hardcodes DIR -# into the library and all subsequent libraries and executables linked -# against it. -hardcode_automatic=$hardcode_automatic - -# Set to yes if linker adds runtime paths of dependent libraries -# to runtime path list. -inherit_rpath=$inherit_rpath - -# Whether libtool must link a program against all its dependency libraries. -link_all_deplibs=$link_all_deplibs - -# Set to "yes" if exported symbols are required. -always_export_symbols=$always_export_symbols - -# The commands to list exported symbols. -export_symbols_cmds=$lt_export_symbols_cmds - -# Symbols that should not be listed in the preloaded symbols. -exclude_expsyms=$lt_exclude_expsyms - -# Symbols that must always be exported. -include_expsyms=$lt_include_expsyms - -# Commands necessary for linking programs (against libraries) with templates. -prelink_cmds=$lt_prelink_cmds - -# Commands necessary for finishing linking programs. -postlink_cmds=$lt_postlink_cmds - -# Specify filename containing input files. -file_list_spec=$lt_file_list_spec - -# How to hardcode a shared library path into an executable. -hardcode_action=$hardcode_action - -# ### END LIBTOOL CONFIG - -_LT_EOF - - case $host_os in - aix3*) - cat <<\_LT_EOF >> "$cfgfile" -# AIX sometimes has problems with the GCC collect2 program. For some -# reason, if we set the COLLECT_NAMES environment variable, the problems -# vanish in a puff of smoke. -if test "X${COLLECT_NAMES+set}" != Xset; then - COLLECT_NAMES= - export COLLECT_NAMES -fi -_LT_EOF - ;; - esac - - -ltmain="$ac_aux_dir/ltmain.sh" - - - # We use sed instead of cat because bash on DJGPP gets confused if - # if finds mixed CR/LF and LF-only lines. Since sed operates in - # text mode, it properly converts lines to CR/LF. This bash problem - # is reportedly fixed, but why not run on old versions too? - sed '$q' "$ltmain" >> "$cfgfile" \ - || (rm -f "$cfgfile"; exit 1) - - if test x"$xsi_shell" = xyes; then - sed -e '/^func_dirname ()$/,/^} # func_dirname /c\ -func_dirname ()\ -{\ -\ case ${1} in\ -\ */*) func_dirname_result="${1%/*}${2}" ;;\ -\ * ) func_dirname_result="${3}" ;;\ -\ esac\ -} # Extended-shell func_dirname implementation' "$cfgfile" > $cfgfile.tmp \ - && mv -f "$cfgfile.tmp" "$cfgfile" \ - || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") -test 0 -eq $? || _lt_function_replace_fail=: - - - sed -e '/^func_basename ()$/,/^} # func_basename /c\ -func_basename ()\ -{\ -\ func_basename_result="${1##*/}"\ -} # Extended-shell func_basename implementation' "$cfgfile" > $cfgfile.tmp \ - && mv -f "$cfgfile.tmp" "$cfgfile" \ - || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") -test 0 -eq $? || _lt_function_replace_fail=: - - - sed -e '/^func_dirname_and_basename ()$/,/^} # func_dirname_and_basename /c\ -func_dirname_and_basename ()\ -{\ -\ case ${1} in\ -\ */*) func_dirname_result="${1%/*}${2}" ;;\ -\ * ) func_dirname_result="${3}" ;;\ -\ esac\ -\ func_basename_result="${1##*/}"\ -} # Extended-shell func_dirname_and_basename implementation' "$cfgfile" > $cfgfile.tmp \ - && mv -f "$cfgfile.tmp" "$cfgfile" \ - || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") -test 0 -eq $? || _lt_function_replace_fail=: - - - sed -e '/^func_stripname ()$/,/^} # func_stripname /c\ -func_stripname ()\ -{\ -\ # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are\ -\ # positional parameters, so assign one to ordinary parameter first.\ -\ func_stripname_result=${3}\ -\ func_stripname_result=${func_stripname_result#"${1}"}\ -\ func_stripname_result=${func_stripname_result%"${2}"}\ -} # Extended-shell func_stripname implementation' "$cfgfile" > $cfgfile.tmp \ - && mv -f "$cfgfile.tmp" "$cfgfile" \ - || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") -test 0 -eq $? || _lt_function_replace_fail=: - - - sed -e '/^func_split_long_opt ()$/,/^} # func_split_long_opt /c\ -func_split_long_opt ()\ -{\ -\ func_split_long_opt_name=${1%%=*}\ -\ func_split_long_opt_arg=${1#*=}\ -} # Extended-shell func_split_long_opt implementation' "$cfgfile" > $cfgfile.tmp \ - && mv -f "$cfgfile.tmp" "$cfgfile" \ - || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") -test 0 -eq $? || _lt_function_replace_fail=: - - - sed -e '/^func_split_short_opt ()$/,/^} # func_split_short_opt /c\ -func_split_short_opt ()\ -{\ -\ func_split_short_opt_arg=${1#??}\ -\ func_split_short_opt_name=${1%"$func_split_short_opt_arg"}\ -} # Extended-shell func_split_short_opt implementation' "$cfgfile" > $cfgfile.tmp \ - && mv -f "$cfgfile.tmp" "$cfgfile" \ - || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") -test 0 -eq $? || _lt_function_replace_fail=: - - - sed -e '/^func_lo2o ()$/,/^} # func_lo2o /c\ -func_lo2o ()\ -{\ -\ case ${1} in\ -\ *.lo) func_lo2o_result=${1%.lo}.${objext} ;;\ -\ *) func_lo2o_result=${1} ;;\ -\ esac\ -} # Extended-shell func_lo2o implementation' "$cfgfile" > $cfgfile.tmp \ - && mv -f "$cfgfile.tmp" "$cfgfile" \ - || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") -test 0 -eq $? || _lt_function_replace_fail=: - - - sed -e '/^func_xform ()$/,/^} # func_xform /c\ -func_xform ()\ -{\ - func_xform_result=${1%.*}.lo\ -} # Extended-shell func_xform implementation' "$cfgfile" > $cfgfile.tmp \ - && mv -f "$cfgfile.tmp" "$cfgfile" \ - || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") -test 0 -eq $? || _lt_function_replace_fail=: - - - sed -e '/^func_arith ()$/,/^} # func_arith /c\ -func_arith ()\ -{\ - func_arith_result=$(( $* ))\ -} # Extended-shell func_arith implementation' "$cfgfile" > $cfgfile.tmp \ - && mv -f "$cfgfile.tmp" "$cfgfile" \ - || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") -test 0 -eq $? || _lt_function_replace_fail=: - - - sed -e '/^func_len ()$/,/^} # func_len /c\ -func_len ()\ -{\ - func_len_result=${#1}\ -} # Extended-shell func_len implementation' "$cfgfile" > $cfgfile.tmp \ - && mv -f "$cfgfile.tmp" "$cfgfile" \ - || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") -test 0 -eq $? || _lt_function_replace_fail=: - -fi - -if test x"$lt_shell_append" = xyes; then - sed -e '/^func_append ()$/,/^} # func_append /c\ -func_append ()\ -{\ - eval "${1}+=\\${2}"\ -} # Extended-shell func_append implementation' "$cfgfile" > $cfgfile.tmp \ - && mv -f "$cfgfile.tmp" "$cfgfile" \ - || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") -test 0 -eq $? || _lt_function_replace_fail=: - - - sed -e '/^func_append_quoted ()$/,/^} # func_append_quoted /c\ -func_append_quoted ()\ -{\ -\ func_quote_for_eval "${2}"\ -\ eval "${1}+=\\\\ \\$func_quote_for_eval_result"\ -} # Extended-shell func_append_quoted implementation' "$cfgfile" > $cfgfile.tmp \ - && mv -f "$cfgfile.tmp" "$cfgfile" \ - || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") -test 0 -eq $? || _lt_function_replace_fail=: - - - # Save a `func_append' function call where possible by direct use of '+=' - sed -e 's%func_append \([a-zA-Z_]\{1,\}\) "%\1+="%g' $cfgfile > $cfgfile.tmp \ - && mv -f "$cfgfile.tmp" "$cfgfile" \ - || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") - test 0 -eq $? || _lt_function_replace_fail=: -else - # Save a `func_append' function call even when '+=' is not available - sed -e 's%func_append \([a-zA-Z_]\{1,\}\) "%\1="$\1%g' $cfgfile > $cfgfile.tmp \ - && mv -f "$cfgfile.tmp" "$cfgfile" \ - || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") - test 0 -eq $? || _lt_function_replace_fail=: -fi - -if test x"$_lt_function_replace_fail" = x":"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Unable to substitute extended shell functions in $ofile" >&5 -$as_echo "$as_me: WARNING: Unable to substitute extended shell functions in $ofile" >&2;} -fi - - - mv -f "$cfgfile" "$ofile" || - (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile") - chmod +x "$ofile" - - ;; - - esac -done # for ac_tag - - -as_fn_exit 0 -_ACEOF -ac_clean_files=$ac_clean_files_save - -test $ac_write_fail = 0 || - as_fn_error $? "write failure creating $CONFIG_STATUS" "$LINENO" 5 - - -# configure is writing to config.log, and then calls config.status. -# config.status does its own redirection, appending to config.log. -# Unfortunately, on DOS this fails, as config.log is still kept open -# by configure, so config.status won't be able to write to it; its -# output is simply discarded. So we exec the FD to /dev/null, -# effectively closing config.log, so it can be properly (re)opened and -# appended to by config.status. When coming back to configure, we -# need to make the FD available again. -if test "$no_create" != yes; then - ac_cs_success=: - ac_config_status_args= - test "$silent" = yes && - ac_config_status_args="$ac_config_status_args --quiet" - exec 5>/dev/null - $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false - exec 5>>config.log - # Use ||, not &&, to avoid exiting from the if with $? = 1, which - # would make configure fail if this is the last instruction. - $ac_cs_success || as_fn_exit 1 -fi -if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: unrecognized options: $ac_unrecognized_opts" >&5 -$as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2;} -fi - -cat >confcache <<\_ACEOF -# This file is a shell script that caches the results of configure -# tests run on this system so they can be shared between configure -# scripts and configure runs, see configure's option --config-cache. -# It is not useful on other systems. If it contains results you don't -# want to keep, you may remove or edit it. -# -# config.status only pays attention to the cache file if you give it -# the --recheck option to rerun configure. -# -# `ac_cv_env_foo' variables (set or unset) will be overridden when -# loading this file, other *unset* `ac_cv_foo' will be assigned the -# following values. - -_ACEOF - -# The following way of writing the cache mishandles newlines in values, -# but we know of no workaround that is simple, portable, and efficient. -# So, we kill variables containing newlines. -# Ultrix sh set writes to stderr and can't be redirected directly, -# and sets the high bit in the cache file unless we assign to the vars. -( - for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do - eval ac_val=\$$ac_var - case $ac_val in #( - *${as_nl}*) - case $ac_var in #( - *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5 -$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;; - esac - case $ac_var in #( - _ | IFS | as_nl) ;; #( - BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #( - *) { eval $ac_var=; unset $ac_var;} ;; - esac ;; - esac - done - - (set) 2>&1 | - case $as_nl`(ac_space=' '; set) 2>&1` in #( - *${as_nl}ac_space=\ *) - # `set' does not quote correctly, so add quotes: double-quote - # substitution turns \\\\ into \\, and sed turns \\ into \. - sed -n \ - "s/'/'\\\\''/g; - s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p" - ;; #( - *) - # `set' quotes correctly as required by POSIX, so do not add quotes. - sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" - ;; - esac | - sort -) | - sed ' - /^ac_cv_env_/b end - t clear - :clear - s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/ - t end - s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/ - :end' >>confcache -if diff "$cache_file" confcache >/dev/null 2>&1; then :; else - if test -w "$cache_file"; then - if test "x$cache_file" != "x/dev/null"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: updating cache $cache_file" >&5 -$as_echo "$as_me: updating cache $cache_file" >&6;} - if test ! -f "$cache_file" || test -h "$cache_file"; then - cat confcache >"$cache_file" - else - case $cache_file in #( - */* | ?:*) - mv -f confcache "$cache_file"$$ && - mv -f "$cache_file"$$ "$cache_file" ;; #( - *) - mv -f confcache "$cache_file" ;; - esac - fi - fi - else - { $as_echo "$as_me:${as_lineno-$LINENO}: not updating unwritable cache $cache_file" >&5 -$as_echo "$as_me: not updating unwritable cache $cache_file" >&6;} - fi -fi -rm -f confcache - -test "x$prefix" = xNONE && prefix=$ac_default_prefix -# Let make expand exec_prefix. -test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' - -DEFS=-DHAVE_CONFIG_H - -ac_libobjs= -ac_ltlibobjs= -U= -for ac_i in : $LIB@&t@OBJS; do test "x$ac_i" = x: && continue - # 1. Remove the extension, and $U if already installed. - ac_script='s/\$U\././;s/\.o$//;s/\.obj$//' - ac_i=`$as_echo "$ac_i" | sed "$ac_script"` - # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR - # will be set to the directory where LIBOBJS objects are built. - as_fn_append ac_libobjs " \${LIBOBJDIR}$ac_i\$U.$ac_objext" - as_fn_append ac_ltlibobjs " \${LIBOBJDIR}$ac_i"'$U.lo' -done -LIB@&t@OBJS=$ac_libobjs - -LTLIBOBJS=$ac_ltlibobjs - - - if test -n "$EXEEXT"; then - am__EXEEXT_TRUE= - am__EXEEXT_FALSE='#' -else - am__EXEEXT_TRUE='#' - am__EXEEXT_FALSE= -fi - -if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then - as_fn_error $? "conditional \"AMDEP\" was never defined. -Usually this means the macro was only invoked conditionally." "$LINENO" 5 -fi -if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then - as_fn_error $? "conditional \"am__fastdepCC\" was never defined. -Usually this means the macro was only invoked conditionally." "$LINENO" 5 -fi -if test -z "${am__EXEEXT_TRUE}" && test -z "${am__EXEEXT_FALSE}"; then - as_fn_error $? "conditional \"am__EXEEXT\" was never defined. -Usually this means the macro was only invoked conditionally." "$LINENO" 5 -fi - -: "${CONFIG_STATUS=./config.status}" -ac_write_fail=0 -ac_clean_files_save=$ac_clean_files -ac_clean_files="$ac_clean_files $CONFIG_STATUS" -{ $as_echo "$as_me:${as_lineno-$LINENO}: creating $CONFIG_STATUS" >&5 -$as_echo "$as_me: creating $CONFIG_STATUS" >&6;} -as_write_fail=0 -cat >$CONFIG_STATUS <<_ASEOF || as_write_fail=1 -#! $SHELL -# Generated by $as_me. -# Run this file to recreate the current configuration. -# Compiler output produced by configure, useful for debugging -# configure, is in config.log if it exists. - -debug=false -ac_cs_recheck=false -ac_cs_silent=false - -SHELL=\${CONFIG_SHELL-$SHELL} -export SHELL -_ASEOF -cat >>$CONFIG_STATUS <<\_ASEOF || as_write_fail=1 -## -------------------- ## -## M4sh Initialization. ## -## -------------------- ## - -# Be more Bourne compatible -DUALCASE=1; export DUALCASE # for MKS sh -if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then : - emulate sh - NULLCMD=: - # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which - # is contrary to our usage. Disable this feature. - alias -g '${1+"$@"}'='"$@"' - setopt NO_GLOB_SUBST -else - case `(set -o) 2>/dev/null` in @%:@( - *posix*) : - set -o posix ;; @%:@( - *) : - ;; -esac -fi - - -as_nl=' -' -export as_nl -# Printing a long string crashes Solaris 7 /usr/bin/printf. -as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' -as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo -as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo -# Prefer a ksh shell builtin over an external printf program on Solaris, -# but without wasting forks for bash or zsh. -if test -z "$BASH_VERSION$ZSH_VERSION" \ - && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then - as_echo='print -r --' - as_echo_n='print -rn --' -elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then - as_echo='printf %s\n' - as_echo_n='printf %s' -else - if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then - as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"' - as_echo_n='/usr/ucb/echo -n' - else - as_echo_body='eval expr "X$1" : "X\\(.*\\)"' - as_echo_n_body='eval - arg=$1; - case $arg in @%:@( - *"$as_nl"*) - expr "X$arg" : "X\\(.*\\)$as_nl"; - arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;; - esac; - expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl" - ' - export as_echo_n_body - as_echo_n='sh -c $as_echo_n_body as_echo' - fi - export as_echo_body - as_echo='sh -c $as_echo_body as_echo' -fi - -# The user is always right. -if test "${PATH_SEPARATOR+set}" != set; then - PATH_SEPARATOR=: - (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { - (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || - PATH_SEPARATOR=';' - } -fi - - -# IFS -# We need space, tab and new line, in precisely that order. Quoting is -# there to prevent editors from complaining about space-tab. -# (If _AS_PATH_WALK were called with IFS unset, it would disable word -# splitting by setting IFS to empty value.) -IFS=" "" $as_nl" - -# Find who we are. Look in the path if we contain no directory separator. -as_myself= -case $0 in @%:@(( - *[\\/]* ) as_myself=$0 ;; - *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break - done -IFS=$as_save_IFS - - ;; -esac -# We did not find ourselves, most probably we were run as `sh COMMAND' -# in which case we are not to be found in the path. -if test "x$as_myself" = x; then - as_myself=$0 -fi -if test ! -f "$as_myself"; then - $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 - exit 1 -fi - -# Unset variables that we do not need and which cause bugs (e.g. in -# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1" -# suppresses any "Segmentation fault" message there. '((' could -# trigger a bug in pdksh 5.2.14. -for as_var in BASH_ENV ENV MAIL MAILPATH -do eval test x\${$as_var+set} = xset \ - && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || : -done -PS1='$ ' -PS2='> ' -PS4='+ ' - -# NLS nuisances. -LC_ALL=C -export LC_ALL -LANGUAGE=C -export LANGUAGE - -# CDPATH. -(unset CDPATH) >/dev/null 2>&1 && unset CDPATH - - -@%:@ as_fn_error STATUS ERROR [LINENO LOG_FD] -@%:@ ---------------------------------------- -@%:@ Output "`basename @S|@0`: error: ERROR" to stderr. If LINENO and LOG_FD are -@%:@ provided, also output the error to LOG_FD, referencing LINENO. Then exit the -@%:@ script with STATUS, using 1 if that was 0. -as_fn_error () -{ - as_status=$1; test $as_status -eq 0 && as_status=1 - if test "$4"; then - as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4 - fi - $as_echo "$as_me: error: $2" >&2 - as_fn_exit $as_status -} @%:@ as_fn_error - - -@%:@ as_fn_set_status STATUS -@%:@ ----------------------- -@%:@ Set @S|@? to STATUS, without forking. -as_fn_set_status () -{ - return $1 -} @%:@ as_fn_set_status - -@%:@ as_fn_exit STATUS -@%:@ ----------------- -@%:@ Exit the shell with STATUS, even in a "trap 0" or "set -e" context. -as_fn_exit () -{ - set +e - as_fn_set_status $1 - exit $1 -} @%:@ as_fn_exit - -@%:@ as_fn_unset VAR -@%:@ --------------- -@%:@ Portably unset VAR. -as_fn_unset () -{ - { eval $1=; unset $1;} -} -as_unset=as_fn_unset -@%:@ as_fn_append VAR VALUE -@%:@ ---------------------- -@%:@ Append the text in VALUE to the end of the definition contained in VAR. Take -@%:@ advantage of any shell optimizations that allow amortized linear growth over -@%:@ repeated appends, instead of the typical quadratic growth present in naive -@%:@ implementations. -if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then : - eval 'as_fn_append () - { - eval $1+=\$2 - }' -else - as_fn_append () - { - eval $1=\$$1\$2 - } -fi # as_fn_append - -@%:@ as_fn_arith ARG... -@%:@ ------------------ -@%:@ Perform arithmetic evaluation on the ARGs, and store the result in the -@%:@ global @S|@as_val. Take advantage of shells that can avoid forks. The arguments -@%:@ must be portable across @S|@(()) and expr. -if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then : - eval 'as_fn_arith () - { - as_val=$(( $* )) - }' -else - as_fn_arith () - { - as_val=`expr "$@" || test $? -eq 1` - } -fi # as_fn_arith - - -if expr a : '\(a\)' >/dev/null 2>&1 && - test "X`expr 00001 : '.*\(...\)'`" = X001; then - as_expr=expr -else - as_expr=false -fi - -if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then - as_basename=basename -else - as_basename=false -fi - -if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then - as_dirname=dirname -else - as_dirname=false -fi - -as_me=`$as_basename -- "$0" || -$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ - X"$0" : 'X\(//\)$' \| \ - X"$0" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X/"$0" | - sed '/^.*\/\([^/][^/]*\)\/*$/{ - s//\1/ - q - } - /^X\/\(\/\/\)$/{ - s//\1/ - q - } - /^X\/\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - -# Avoid depending upon Character Ranges. -as_cr_letters='abcdefghijklmnopqrstuvwxyz' -as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' -as_cr_Letters=$as_cr_letters$as_cr_LETTERS -as_cr_digits='0123456789' -as_cr_alnum=$as_cr_Letters$as_cr_digits - -ECHO_C= ECHO_N= ECHO_T= -case `echo -n x` in @%:@((((( --n*) - case `echo 'xy\c'` in - *c*) ECHO_T=' ';; # ECHO_T is single tab character. - xy) ECHO_C='\c';; - *) echo `echo ksh88 bug on AIX 6.1` > /dev/null - ECHO_T=' ';; - esac;; -*) - ECHO_N='-n';; -esac - -rm -f conf$$ conf$$.exe conf$$.file -if test -d conf$$.dir; then - rm -f conf$$.dir/conf$$.file -else - rm -f conf$$.dir - mkdir conf$$.dir 2>/dev/null -fi -if (echo >conf$$.file) 2>/dev/null; then - if ln -s conf$$.file conf$$ 2>/dev/null; then - as_ln_s='ln -s' - # ... but there are two gotchas: - # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. - # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. - # In both cases, we have to default to `cp -p'. - ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || - as_ln_s='cp -p' - elif ln conf$$.file conf$$ 2>/dev/null; then - as_ln_s=ln - else - as_ln_s='cp -p' - fi -else - as_ln_s='cp -p' -fi -rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file -rmdir conf$$.dir 2>/dev/null - - -@%:@ as_fn_mkdir_p -@%:@ ------------- -@%:@ Create "@S|@as_dir" as a directory, including parents if necessary. -as_fn_mkdir_p () -{ - - case $as_dir in #( - -*) as_dir=./$as_dir;; - esac - test -d "$as_dir" || eval $as_mkdir_p || { - as_dirs= - while :; do - case $as_dir in #( - *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( - *) as_qdir=$as_dir;; - esac - as_dirs="'$as_qdir' $as_dirs" - as_dir=`$as_dirname -- "$as_dir" || -$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$as_dir" : 'X\(//\)[^/]' \| \ - X"$as_dir" : 'X\(//\)$' \| \ - X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X"$as_dir" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - test -d "$as_dir" && break - done - test -z "$as_dirs" || eval "mkdir $as_dirs" - } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir" - - -} @%:@ as_fn_mkdir_p -if mkdir -p . 2>/dev/null; then - as_mkdir_p='mkdir -p "$as_dir"' -else - test -d ./-p && rmdir ./-p - as_mkdir_p=false -fi - -if test -x / >/dev/null 2>&1; then - as_test_x='test -x' -else - if ls -dL / >/dev/null 2>&1; then - as_ls_L_option=L - else - as_ls_L_option= - fi - as_test_x=' - eval sh -c '\'' - if test -d "$1"; then - test -d "$1/."; - else - case $1 in @%:@( - -*)set "./$1";; - esac; - case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in @%:@(( - ???[sx]*):;;*)false;;esac;fi - '\'' sh - ' -fi -as_executable_p=$as_test_x - -# Sed expression to map a string onto a valid CPP name. -as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" - -# Sed expression to map a string onto a valid variable name. -as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" - - -exec 6>&1 -## ----------------------------------- ## -## Main body of $CONFIG_STATUS script. ## -## ----------------------------------- ## -_ASEOF -test $as_write_fail = 0 && chmod +x $CONFIG_STATUS || ac_write_fail=1 - -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -# Save the log message, to keep $0 and so on meaningful, and to -# report actual input values of CONFIG_FILES etc. instead of their -# values after options handling. -ac_log=" -This file was extended by shairport.c $as_me 1.2.0, which was -generated by GNU Autoconf 2.68. Invocation command line was - - CONFIG_FILES = $CONFIG_FILES - CONFIG_HEADERS = $CONFIG_HEADERS - CONFIG_LINKS = $CONFIG_LINKS - CONFIG_COMMANDS = $CONFIG_COMMANDS - $ $0 $@ - -on `(hostname || uname -n) 2>/dev/null | sed 1q` -" - -_ACEOF - -case $ac_config_files in *" -"*) set x $ac_config_files; shift; ac_config_files=$*;; -esac - -case $ac_config_headers in *" -"*) set x $ac_config_headers; shift; ac_config_headers=$*;; -esac - - -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -# Files that config.status was made for. -config_files="$ac_config_files" -config_headers="$ac_config_headers" -config_commands="$ac_config_commands" - -_ACEOF - -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -ac_cs_usage="\ -\`$as_me' instantiates files and other configuration actions -from templates according to the current configuration. Unless the files -and actions are specified as TAGs, all are instantiated by default. - -Usage: $0 [OPTION]... [TAG]... - - -h, --help print this help, then exit - -V, --version print version number and configuration settings, then exit - --config print configuration, then exit - -q, --quiet, --silent - do not print progress messages - -d, --debug don't remove temporary files - --recheck update $as_me by reconfiguring in the same conditions - --file=FILE[:TEMPLATE] - instantiate the configuration file FILE - --header=FILE[:TEMPLATE] - instantiate the configuration header FILE - -Configuration files: -$config_files - -Configuration headers: -$config_headers - -Configuration commands: -$config_commands - -Report bugs to ." - -_ACEOF -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`" -ac_cs_version="\\ -shairport.c config.status 1.2.0 -configured by $0, generated by GNU Autoconf 2.68, - with options \\"\$ac_cs_config\\" - -Copyright (C) 2010 Free Software Foundation, Inc. -This config.status script is free software; the Free Software Foundation -gives unlimited permission to copy, distribute and modify it." - -ac_pwd='$ac_pwd' -srcdir='$srcdir' -INSTALL='$INSTALL' -MKDIR_P='$MKDIR_P' -AWK='$AWK' -test -n "\$AWK" || AWK=awk -_ACEOF - -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -# The default lists apply if the user does not specify any file. -ac_need_defaults=: -while test $# != 0 -do - case $1 in - --*=?*) - ac_option=`expr "X$1" : 'X\([^=]*\)='` - ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'` - ac_shift=: - ;; - --*=) - ac_option=`expr "X$1" : 'X\([^=]*\)='` - ac_optarg= - ac_shift=: - ;; - *) - ac_option=$1 - ac_optarg=$2 - ac_shift=shift - ;; - esac - - case $ac_option in - # Handling of the options. - -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) - ac_cs_recheck=: ;; - --version | --versio | --versi | --vers | --ver | --ve | --v | -V ) - $as_echo "$ac_cs_version"; exit ;; - --config | --confi | --conf | --con | --co | --c ) - $as_echo "$ac_cs_config"; exit ;; - --debug | --debu | --deb | --de | --d | -d ) - debug=: ;; - --file | --fil | --fi | --f ) - $ac_shift - case $ac_optarg in - *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; - '') as_fn_error $? "missing file argument" ;; - esac - as_fn_append CONFIG_FILES " '$ac_optarg'" - ac_need_defaults=false;; - --header | --heade | --head | --hea ) - $ac_shift - case $ac_optarg in - *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; - esac - as_fn_append CONFIG_HEADERS " '$ac_optarg'" - ac_need_defaults=false;; - --he | --h) - # Conflict between --help and --header - as_fn_error $? "ambiguous option: \`$1' -Try \`$0 --help' for more information.";; - --help | --hel | -h ) - $as_echo "$ac_cs_usage"; exit ;; - -q | -quiet | --quiet | --quie | --qui | --qu | --q \ - | -silent | --silent | --silen | --sile | --sil | --si | --s) - ac_cs_silent=: ;; - - # This is an error. - -*) as_fn_error $? "unrecognized option: \`$1' -Try \`$0 --help' for more information." ;; - - *) as_fn_append ac_config_targets " $1" - ac_need_defaults=false ;; - - esac - shift -done - -ac_configure_extra_args= - -if $ac_cs_silent; then - exec 6>/dev/null - ac_configure_extra_args="$ac_configure_extra_args --silent" -fi - -_ACEOF -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -if \$ac_cs_recheck; then - set X '$SHELL' '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion - shift - \$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6 - CONFIG_SHELL='$SHELL' - export CONFIG_SHELL - exec "\$@" -fi - -_ACEOF -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -exec 5>>config.log -{ - echo - sed 'h;s/./-/g;s/^.../@%:@@%:@ /;s/...$/ @%:@@%:@/;p;x;p;x' <<_ASBOX -@%:@@%:@ Running $as_me. @%:@@%:@ -_ASBOX - $as_echo "$ac_log" -} >&5 - -_ACEOF -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -# -# INIT-COMMANDS -# -AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir" - - -# The HP-UX ksh and POSIX shell print the target directory to stdout -# if CDPATH is set. -(unset CDPATH) >/dev/null 2>&1 && unset CDPATH - -sed_quote_subst='$sed_quote_subst' -double_quote_subst='$double_quote_subst' -delay_variable_subst='$delay_variable_subst' -enable_static='`$ECHO "$enable_static" | $SED "$delay_single_quote_subst"`' -macro_version='`$ECHO "$macro_version" | $SED "$delay_single_quote_subst"`' -macro_revision='`$ECHO "$macro_revision" | $SED "$delay_single_quote_subst"`' -enable_shared='`$ECHO "$enable_shared" | $SED "$delay_single_quote_subst"`' -pic_mode='`$ECHO "$pic_mode" | $SED "$delay_single_quote_subst"`' -enable_fast_install='`$ECHO "$enable_fast_install" | $SED "$delay_single_quote_subst"`' -SHELL='`$ECHO "$SHELL" | $SED "$delay_single_quote_subst"`' -ECHO='`$ECHO "$ECHO" | $SED "$delay_single_quote_subst"`' -host_alias='`$ECHO "$host_alias" | $SED "$delay_single_quote_subst"`' -host='`$ECHO "$host" | $SED "$delay_single_quote_subst"`' -host_os='`$ECHO "$host_os" | $SED "$delay_single_quote_subst"`' -build_alias='`$ECHO "$build_alias" | $SED "$delay_single_quote_subst"`' -build='`$ECHO "$build" | $SED "$delay_single_quote_subst"`' -build_os='`$ECHO "$build_os" | $SED "$delay_single_quote_subst"`' -SED='`$ECHO "$SED" | $SED "$delay_single_quote_subst"`' -Xsed='`$ECHO "$Xsed" | $SED "$delay_single_quote_subst"`' -GREP='`$ECHO "$GREP" | $SED "$delay_single_quote_subst"`' -EGREP='`$ECHO "$EGREP" | $SED "$delay_single_quote_subst"`' -FGREP='`$ECHO "$FGREP" | $SED "$delay_single_quote_subst"`' -LD='`$ECHO "$LD" | $SED "$delay_single_quote_subst"`' -NM='`$ECHO "$NM" | $SED "$delay_single_quote_subst"`' -LN_S='`$ECHO "$LN_S" | $SED "$delay_single_quote_subst"`' -max_cmd_len='`$ECHO "$max_cmd_len" | $SED "$delay_single_quote_subst"`' -ac_objext='`$ECHO "$ac_objext" | $SED "$delay_single_quote_subst"`' -exeext='`$ECHO "$exeext" | $SED "$delay_single_quote_subst"`' -lt_unset='`$ECHO "$lt_unset" | $SED "$delay_single_quote_subst"`' -lt_SP2NL='`$ECHO "$lt_SP2NL" | $SED "$delay_single_quote_subst"`' -lt_NL2SP='`$ECHO "$lt_NL2SP" | $SED "$delay_single_quote_subst"`' -lt_cv_to_host_file_cmd='`$ECHO "$lt_cv_to_host_file_cmd" | $SED "$delay_single_quote_subst"`' -lt_cv_to_tool_file_cmd='`$ECHO "$lt_cv_to_tool_file_cmd" | $SED "$delay_single_quote_subst"`' -reload_flag='`$ECHO "$reload_flag" | $SED "$delay_single_quote_subst"`' -reload_cmds='`$ECHO "$reload_cmds" | $SED "$delay_single_quote_subst"`' -OBJDUMP='`$ECHO "$OBJDUMP" | $SED "$delay_single_quote_subst"`' -deplibs_check_method='`$ECHO "$deplibs_check_method" | $SED "$delay_single_quote_subst"`' -file_magic_cmd='`$ECHO "$file_magic_cmd" | $SED "$delay_single_quote_subst"`' -file_magic_glob='`$ECHO "$file_magic_glob" | $SED "$delay_single_quote_subst"`' -want_nocaseglob='`$ECHO "$want_nocaseglob" | $SED "$delay_single_quote_subst"`' -DLLTOOL='`$ECHO "$DLLTOOL" | $SED "$delay_single_quote_subst"`' -sharedlib_from_linklib_cmd='`$ECHO "$sharedlib_from_linklib_cmd" | $SED "$delay_single_quote_subst"`' -AR='`$ECHO "$AR" | $SED "$delay_single_quote_subst"`' -AR_FLAGS='`$ECHO "$AR_FLAGS" | $SED "$delay_single_quote_subst"`' -archiver_list_spec='`$ECHO "$archiver_list_spec" | $SED "$delay_single_quote_subst"`' -STRIP='`$ECHO "$STRIP" | $SED "$delay_single_quote_subst"`' -RANLIB='`$ECHO "$RANLIB" | $SED "$delay_single_quote_subst"`' -old_postinstall_cmds='`$ECHO "$old_postinstall_cmds" | $SED "$delay_single_quote_subst"`' -old_postuninstall_cmds='`$ECHO "$old_postuninstall_cmds" | $SED "$delay_single_quote_subst"`' -old_archive_cmds='`$ECHO "$old_archive_cmds" | $SED "$delay_single_quote_subst"`' -lock_old_archive_extraction='`$ECHO "$lock_old_archive_extraction" | $SED "$delay_single_quote_subst"`' -CC='`$ECHO "$CC" | $SED "$delay_single_quote_subst"`' -CFLAGS='`$ECHO "$CFLAGS" | $SED "$delay_single_quote_subst"`' -compiler='`$ECHO "$compiler" | $SED "$delay_single_quote_subst"`' -GCC='`$ECHO "$GCC" | $SED "$delay_single_quote_subst"`' -lt_cv_sys_global_symbol_pipe='`$ECHO "$lt_cv_sys_global_symbol_pipe" | $SED "$delay_single_quote_subst"`' -lt_cv_sys_global_symbol_to_cdecl='`$ECHO "$lt_cv_sys_global_symbol_to_cdecl" | $SED "$delay_single_quote_subst"`' -lt_cv_sys_global_symbol_to_c_name_address='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address" | $SED "$delay_single_quote_subst"`' -lt_cv_sys_global_symbol_to_c_name_address_lib_prefix='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address_lib_prefix" | $SED "$delay_single_quote_subst"`' -nm_file_list_spec='`$ECHO "$nm_file_list_spec" | $SED "$delay_single_quote_subst"`' -lt_sysroot='`$ECHO "$lt_sysroot" | $SED "$delay_single_quote_subst"`' -objdir='`$ECHO "$objdir" | $SED "$delay_single_quote_subst"`' -MAGIC_CMD='`$ECHO "$MAGIC_CMD" | $SED "$delay_single_quote_subst"`' -lt_prog_compiler_no_builtin_flag='`$ECHO "$lt_prog_compiler_no_builtin_flag" | $SED "$delay_single_quote_subst"`' -lt_prog_compiler_pic='`$ECHO "$lt_prog_compiler_pic" | $SED "$delay_single_quote_subst"`' -lt_prog_compiler_wl='`$ECHO "$lt_prog_compiler_wl" | $SED "$delay_single_quote_subst"`' -lt_prog_compiler_static='`$ECHO "$lt_prog_compiler_static" | $SED "$delay_single_quote_subst"`' -lt_cv_prog_compiler_c_o='`$ECHO "$lt_cv_prog_compiler_c_o" | $SED "$delay_single_quote_subst"`' -need_locks='`$ECHO "$need_locks" | $SED "$delay_single_quote_subst"`' -MANIFEST_TOOL='`$ECHO "$MANIFEST_TOOL" | $SED "$delay_single_quote_subst"`' -DSYMUTIL='`$ECHO "$DSYMUTIL" | $SED "$delay_single_quote_subst"`' -NMEDIT='`$ECHO "$NMEDIT" | $SED "$delay_single_quote_subst"`' -LIPO='`$ECHO "$LIPO" | $SED "$delay_single_quote_subst"`' -OTOOL='`$ECHO "$OTOOL" | $SED "$delay_single_quote_subst"`' -OTOOL64='`$ECHO "$OTOOL64" | $SED "$delay_single_quote_subst"`' -libext='`$ECHO "$libext" | $SED "$delay_single_quote_subst"`' -shrext_cmds='`$ECHO "$shrext_cmds" | $SED "$delay_single_quote_subst"`' -extract_expsyms_cmds='`$ECHO "$extract_expsyms_cmds" | $SED "$delay_single_quote_subst"`' -archive_cmds_need_lc='`$ECHO "$archive_cmds_need_lc" | $SED "$delay_single_quote_subst"`' -enable_shared_with_static_runtimes='`$ECHO "$enable_shared_with_static_runtimes" | $SED "$delay_single_quote_subst"`' -export_dynamic_flag_spec='`$ECHO "$export_dynamic_flag_spec" | $SED "$delay_single_quote_subst"`' -whole_archive_flag_spec='`$ECHO "$whole_archive_flag_spec" | $SED "$delay_single_quote_subst"`' -compiler_needs_object='`$ECHO "$compiler_needs_object" | $SED "$delay_single_quote_subst"`' -old_archive_from_new_cmds='`$ECHO "$old_archive_from_new_cmds" | $SED "$delay_single_quote_subst"`' -old_archive_from_expsyms_cmds='`$ECHO "$old_archive_from_expsyms_cmds" | $SED "$delay_single_quote_subst"`' -archive_cmds='`$ECHO "$archive_cmds" | $SED "$delay_single_quote_subst"`' -archive_expsym_cmds='`$ECHO "$archive_expsym_cmds" | $SED "$delay_single_quote_subst"`' -module_cmds='`$ECHO "$module_cmds" | $SED "$delay_single_quote_subst"`' -module_expsym_cmds='`$ECHO "$module_expsym_cmds" | $SED "$delay_single_quote_subst"`' -with_gnu_ld='`$ECHO "$with_gnu_ld" | $SED "$delay_single_quote_subst"`' -allow_undefined_flag='`$ECHO "$allow_undefined_flag" | $SED "$delay_single_quote_subst"`' -no_undefined_flag='`$ECHO "$no_undefined_flag" | $SED "$delay_single_quote_subst"`' -hardcode_libdir_flag_spec='`$ECHO "$hardcode_libdir_flag_spec" | $SED "$delay_single_quote_subst"`' -hardcode_libdir_flag_spec_ld='`$ECHO "$hardcode_libdir_flag_spec_ld" | $SED "$delay_single_quote_subst"`' -hardcode_libdir_separator='`$ECHO "$hardcode_libdir_separator" | $SED "$delay_single_quote_subst"`' -hardcode_direct='`$ECHO "$hardcode_direct" | $SED "$delay_single_quote_subst"`' -hardcode_direct_absolute='`$ECHO "$hardcode_direct_absolute" | $SED "$delay_single_quote_subst"`' -hardcode_minus_L='`$ECHO "$hardcode_minus_L" | $SED "$delay_single_quote_subst"`' -hardcode_shlibpath_var='`$ECHO "$hardcode_shlibpath_var" | $SED "$delay_single_quote_subst"`' -hardcode_automatic='`$ECHO "$hardcode_automatic" | $SED "$delay_single_quote_subst"`' -inherit_rpath='`$ECHO "$inherit_rpath" | $SED "$delay_single_quote_subst"`' -link_all_deplibs='`$ECHO "$link_all_deplibs" | $SED "$delay_single_quote_subst"`' -always_export_symbols='`$ECHO "$always_export_symbols" | $SED "$delay_single_quote_subst"`' -export_symbols_cmds='`$ECHO "$export_symbols_cmds" | $SED "$delay_single_quote_subst"`' -exclude_expsyms='`$ECHO "$exclude_expsyms" | $SED "$delay_single_quote_subst"`' -include_expsyms='`$ECHO "$include_expsyms" | $SED "$delay_single_quote_subst"`' -prelink_cmds='`$ECHO "$prelink_cmds" | $SED "$delay_single_quote_subst"`' -postlink_cmds='`$ECHO "$postlink_cmds" | $SED "$delay_single_quote_subst"`' -file_list_spec='`$ECHO "$file_list_spec" | $SED "$delay_single_quote_subst"`' -variables_saved_for_relink='`$ECHO "$variables_saved_for_relink" | $SED "$delay_single_quote_subst"`' -need_lib_prefix='`$ECHO "$need_lib_prefix" | $SED "$delay_single_quote_subst"`' -need_version='`$ECHO "$need_version" | $SED "$delay_single_quote_subst"`' -version_type='`$ECHO "$version_type" | $SED "$delay_single_quote_subst"`' -runpath_var='`$ECHO "$runpath_var" | $SED "$delay_single_quote_subst"`' -shlibpath_var='`$ECHO "$shlibpath_var" | $SED "$delay_single_quote_subst"`' -shlibpath_overrides_runpath='`$ECHO "$shlibpath_overrides_runpath" | $SED "$delay_single_quote_subst"`' -libname_spec='`$ECHO "$libname_spec" | $SED "$delay_single_quote_subst"`' -library_names_spec='`$ECHO "$library_names_spec" | $SED "$delay_single_quote_subst"`' -soname_spec='`$ECHO "$soname_spec" | $SED "$delay_single_quote_subst"`' -install_override_mode='`$ECHO "$install_override_mode" | $SED "$delay_single_quote_subst"`' -postinstall_cmds='`$ECHO "$postinstall_cmds" | $SED "$delay_single_quote_subst"`' -postuninstall_cmds='`$ECHO "$postuninstall_cmds" | $SED "$delay_single_quote_subst"`' -finish_cmds='`$ECHO "$finish_cmds" | $SED "$delay_single_quote_subst"`' -finish_eval='`$ECHO "$finish_eval" | $SED "$delay_single_quote_subst"`' -hardcode_into_libs='`$ECHO "$hardcode_into_libs" | $SED "$delay_single_quote_subst"`' -sys_lib_search_path_spec='`$ECHO "$sys_lib_search_path_spec" | $SED "$delay_single_quote_subst"`' -sys_lib_dlsearch_path_spec='`$ECHO "$sys_lib_dlsearch_path_spec" | $SED "$delay_single_quote_subst"`' -hardcode_action='`$ECHO "$hardcode_action" | $SED "$delay_single_quote_subst"`' -enable_dlopen='`$ECHO "$enable_dlopen" | $SED "$delay_single_quote_subst"`' -enable_dlopen_self='`$ECHO "$enable_dlopen_self" | $SED "$delay_single_quote_subst"`' -enable_dlopen_self_static='`$ECHO "$enable_dlopen_self_static" | $SED "$delay_single_quote_subst"`' -old_striplib='`$ECHO "$old_striplib" | $SED "$delay_single_quote_subst"`' -striplib='`$ECHO "$striplib" | $SED "$delay_single_quote_subst"`' - -LTCC='$LTCC' -LTCFLAGS='$LTCFLAGS' -compiler='$compiler_DEFAULT' - -# A function that is used when there is no print builtin or printf. -func_fallback_echo () -{ - eval 'cat <<_LTECHO_EOF -\$1 -_LTECHO_EOF' -} - -# Quote evaled strings. -for var in SHELL \ -ECHO \ -SED \ -GREP \ -EGREP \ -FGREP \ -LD \ -NM \ -LN_S \ -lt_SP2NL \ -lt_NL2SP \ -reload_flag \ -OBJDUMP \ -deplibs_check_method \ -file_magic_cmd \ -file_magic_glob \ -want_nocaseglob \ -DLLTOOL \ -sharedlib_from_linklib_cmd \ -AR \ -AR_FLAGS \ -archiver_list_spec \ -STRIP \ -RANLIB \ -CC \ -CFLAGS \ -compiler \ -lt_cv_sys_global_symbol_pipe \ -lt_cv_sys_global_symbol_to_cdecl \ -lt_cv_sys_global_symbol_to_c_name_address \ -lt_cv_sys_global_symbol_to_c_name_address_lib_prefix \ -nm_file_list_spec \ -lt_prog_compiler_no_builtin_flag \ -lt_prog_compiler_pic \ -lt_prog_compiler_wl \ -lt_prog_compiler_static \ -lt_cv_prog_compiler_c_o \ -need_locks \ -MANIFEST_TOOL \ -DSYMUTIL \ -NMEDIT \ -LIPO \ -OTOOL \ -OTOOL64 \ -shrext_cmds \ -export_dynamic_flag_spec \ -whole_archive_flag_spec \ -compiler_needs_object \ -with_gnu_ld \ -allow_undefined_flag \ -no_undefined_flag \ -hardcode_libdir_flag_spec \ -hardcode_libdir_flag_spec_ld \ -hardcode_libdir_separator \ -exclude_expsyms \ -include_expsyms \ -file_list_spec \ -variables_saved_for_relink \ -libname_spec \ -library_names_spec \ -soname_spec \ -install_override_mode \ -finish_eval \ -old_striplib \ -striplib; do - case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in - *[\\\\\\\`\\"\\\$]*) - eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED \\"\\\$sed_quote_subst\\"\\\`\\\\\\"" - ;; - *) - eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\"" - ;; - esac -done - -# Double-quote double-evaled strings. -for var in reload_cmds \ -old_postinstall_cmds \ -old_postuninstall_cmds \ -old_archive_cmds \ -extract_expsyms_cmds \ -old_archive_from_new_cmds \ -old_archive_from_expsyms_cmds \ -archive_cmds \ -archive_expsym_cmds \ -module_cmds \ -module_expsym_cmds \ -export_symbols_cmds \ -prelink_cmds \ -postlink_cmds \ -postinstall_cmds \ -postuninstall_cmds \ -finish_cmds \ -sys_lib_search_path_spec \ -sys_lib_dlsearch_path_spec; do - case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in - *[\\\\\\\`\\"\\\$]*) - eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\"" - ;; - *) - eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\"" - ;; - esac -done - -ac_aux_dir='$ac_aux_dir' -xsi_shell='$xsi_shell' -lt_shell_append='$lt_shell_append' - -# See if we are running on zsh, and set the options which allow our -# commands through without removal of \ escapes INIT. -if test -n "\${ZSH_VERSION+set}" ; then - setopt NO_GLOB_SUBST -fi - - - PACKAGE='$PACKAGE' - VERSION='$VERSION' - TIMESTAMP='$TIMESTAMP' - RM='$RM' - ofile='$ofile' - -ac_aux_dir='$ac_aux_dir' - - - -_ACEOF - -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 - -# Handling of arguments. -for ac_config_target in $ac_config_targets -do - case $ac_config_target in - "config.h") CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;; - "depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;; - "libtool") CONFIG_COMMANDS="$CONFIG_COMMANDS libtool" ;; - "${OUTPUT_FILES}") CONFIG_FILES="$CONFIG_FILES ${OUTPUT_FILES}" ;; - "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;; - "src/Makefile") CONFIG_FILES="$CONFIG_FILES src/Makefile" ;; - - *) as_fn_error $? "invalid argument: \`$ac_config_target'" "$LINENO" 5;; - esac -done - - -# If the user did not use the arguments to specify the items to instantiate, -# then the envvar interface is used. Set only those that are not. -# We use the long form for the default assignment because of an extremely -# bizarre bug on SunOS 4.1.3. -if $ac_need_defaults; then - test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files - test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers - test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands -fi - -# Have a temporary directory for convenience. Make it in the build tree -# simply because there is no reason against having it here, and in addition, -# creating and moving files from /tmp can sometimes cause problems. -# Hook for its removal unless debugging. -# Note that there is a small window in which the directory will not be cleaned: -# after its creation but before its name has been assigned to `$tmp'. -$debug || -{ - tmp= ac_tmp= - trap 'exit_status=$? - : "${ac_tmp:=$tmp}" - { test ! -d "$ac_tmp" || rm -fr "$ac_tmp"; } && exit $exit_status -' 0 - trap 'as_fn_exit 1' 1 2 13 15 -} -# Create a (secure) tmp directory for tmp files. - -{ - tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` && - test -d "$tmp" -} || -{ - tmp=./conf$$-$RANDOM - (umask 077 && mkdir "$tmp") -} || as_fn_error $? "cannot create a temporary directory in ." "$LINENO" 5 -ac_tmp=$tmp - -# Set up the scripts for CONFIG_FILES section. -# No need to generate them if there are no CONFIG_FILES. -# This happens for instance with `./config.status config.h'. -if test -n "$CONFIG_FILES"; then - - -ac_cr=`echo X | tr X '\015'` -# On cygwin, bash can eat \r inside `` if the user requested igncr. -# But we know of no other shell where ac_cr would be empty at this -# point, so we can use a bashism as a fallback. -if test "x$ac_cr" = x; then - eval ac_cr=\$\'\\r\' -fi -ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' /dev/null` -if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then - ac_cs_awk_cr='\\r' -else - ac_cs_awk_cr=$ac_cr -fi - -echo 'BEGIN {' >"$ac_tmp/subs1.awk" && -_ACEOF - - -{ - echo "cat >conf$$subs.awk <<_ACEOF" && - echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' && - echo "_ACEOF" -} >conf$$subs.sh || - as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 -ac_delim_num=`echo "$ac_subst_vars" | grep -c '^'` -ac_delim='%!_!# ' -for ac_last_try in false false false false false :; do - . ./conf$$subs.sh || - as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 - - ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X` - if test $ac_delim_n = $ac_delim_num; then - break - elif $ac_last_try; then - as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 - else - ac_delim="$ac_delim!$ac_delim _$ac_delim!! " - fi -done -rm -f conf$$subs.sh - -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -cat >>"\$ac_tmp/subs1.awk" <<\\_ACAWK && -_ACEOF -sed -n ' -h -s/^/S["/; s/!.*/"]=/ -p -g -s/^[^!]*!// -:repl -t repl -s/'"$ac_delim"'$// -t delim -:nl -h -s/\(.\{148\}\)..*/\1/ -t more1 -s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/ -p -n -b repl -:more1 -s/["\\]/\\&/g; s/^/"/; s/$/"\\/ -p -g -s/.\{148\}// -t nl -:delim -h -s/\(.\{148\}\)..*/\1/ -t more2 -s/["\\]/\\&/g; s/^/"/; s/$/"/ -p -b -:more2 -s/["\\]/\\&/g; s/^/"/; s/$/"\\/ -p -g -s/.\{148\}// -t delim -' >$CONFIG_STATUS || ac_write_fail=1 -rm -f conf$$subs.awk -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -_ACAWK -cat >>"\$ac_tmp/subs1.awk" <<_ACAWK && - for (key in S) S_is_set[key] = 1 - FS = "" - -} -{ - line = $ 0 - nfields = split(line, field, "@") - substed = 0 - len = length(field[1]) - for (i = 2; i < nfields; i++) { - key = field[i] - keylen = length(key) - if (S_is_set[key]) { - value = S[key] - line = substr(line, 1, len) "" value "" substr(line, len + keylen + 3) - len += length(value) + length(field[++i]) - substed = 1 - } else - len += 1 + keylen - } - - print line -} - -_ACAWK -_ACEOF -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then - sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g" -else - cat -fi < "$ac_tmp/subs1.awk" > "$ac_tmp/subs.awk" \ - || as_fn_error $? "could not setup config files machinery" "$LINENO" 5 -_ACEOF - -# VPATH may cause trouble with some makes, so we remove sole $(srcdir), -# ${srcdir} and @srcdir@ entries from VPATH if srcdir is ".", strip leading and -# trailing colons and then remove the whole line if VPATH becomes empty -# (actually we leave an empty line to preserve line numbers). -if test "x$srcdir" = x.; then - ac_vpsub='/^[ ]*VPATH[ ]*=[ ]*/{ -h -s/// -s/^/:/ -s/[ ]*$/:/ -s/:\$(srcdir):/:/g -s/:\${srcdir}:/:/g -s/:@srcdir@:/:/g -s/^:*// -s/:*$// -x -s/\(=[ ]*\).*/\1/ -G -s/\n// -s/^[^=]*=[ ]*$// -}' -fi - -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -fi # test -n "$CONFIG_FILES" - -# Set up the scripts for CONFIG_HEADERS section. -# No need to generate them if there are no CONFIG_HEADERS. -# This happens for instance with `./config.status Makefile'. -if test -n "$CONFIG_HEADERS"; then -cat >"$ac_tmp/defines.awk" <<\_ACAWK || -BEGIN { -_ACEOF - -# Transform confdefs.h into an awk script `defines.awk', embedded as -# here-document in config.status, that substitutes the proper values into -# config.h.in to produce config.h. - -# Create a delimiter string that does not exist in confdefs.h, to ease -# handling of long lines. -ac_delim='%!_!# ' -for ac_last_try in false false :; do - ac_tt=`sed -n "/$ac_delim/p" confdefs.h` - if test -z "$ac_tt"; then - break - elif $ac_last_try; then - as_fn_error $? "could not make $CONFIG_HEADERS" "$LINENO" 5 - else - ac_delim="$ac_delim!$ac_delim _$ac_delim!! " - fi -done - -# For the awk script, D is an array of macro values keyed by name, -# likewise P contains macro parameters if any. Preserve backslash -# newline sequences. - -ac_word_re=[_$as_cr_Letters][_$as_cr_alnum]* -sed -n ' -s/.\{148\}/&'"$ac_delim"'/g -t rset -:rset -s/^[ ]*#[ ]*define[ ][ ]*/ / -t def -d -:def -s/\\$// -t bsnl -s/["\\]/\\&/g -s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\ -D["\1"]=" \3"/p -s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2"/p -d -:bsnl -s/["\\]/\\&/g -s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\ -D["\1"]=" \3\\\\\\n"\\/p -t cont -s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2\\\\\\n"\\/p -t cont -d -:cont -n -s/.\{148\}/&'"$ac_delim"'/g -t clear -:clear -s/\\$// -t bsnlc -s/["\\]/\\&/g; s/^/"/; s/$/"/p -d -:bsnlc -s/["\\]/\\&/g; s/^/"/; s/$/\\\\\\n"\\/p -b cont -' >$CONFIG_STATUS || ac_write_fail=1 - -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 - for (key in D) D_is_set[key] = 1 - FS = "" -} -/^[\t ]*#[\t ]*(define|undef)[\t ]+$ac_word_re([\t (]|\$)/ { - line = \$ 0 - split(line, arg, " ") - if (arg[1] == "#") { - defundef = arg[2] - mac1 = arg[3] - } else { - defundef = substr(arg[1], 2) - mac1 = arg[2] - } - split(mac1, mac2, "(") #) - macro = mac2[1] - prefix = substr(line, 1, index(line, defundef) - 1) - if (D_is_set[macro]) { - # Preserve the white space surrounding the "#". - print prefix "define", macro P[macro] D[macro] - next - } else { - # Replace #undef with comments. This is necessary, for example, - # in the case of _POSIX_SOURCE, which is predefined and required - # on some systems where configure will not decide to define it. - if (defundef == "undef") { - print "/*", prefix defundef, macro, "*/" - next - } - } -} -{ print } -_ACAWK -_ACEOF -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 - as_fn_error $? "could not setup config headers machinery" "$LINENO" 5 -fi # test -n "$CONFIG_HEADERS" - - -eval set X " :F $CONFIG_FILES :H $CONFIG_HEADERS :C $CONFIG_COMMANDS" -shift -for ac_tag -do - case $ac_tag in - :[FHLC]) ac_mode=$ac_tag; continue;; - esac - case $ac_mode$ac_tag in - :[FHL]*:*);; - :L* | :C*:*) as_fn_error $? "invalid tag \`$ac_tag'" "$LINENO" 5;; - :[FH]-) ac_tag=-:-;; - :[FH]*) ac_tag=$ac_tag:$ac_tag.in;; - esac - ac_save_IFS=$IFS - IFS=: - set x $ac_tag - IFS=$ac_save_IFS - shift - ac_file=$1 - shift - - case $ac_mode in - :L) ac_source=$1;; - :[FH]) - ac_file_inputs= - for ac_f - do - case $ac_f in - -) ac_f="$ac_tmp/stdin";; - *) # Look for the file first in the build tree, then in the source tree - # (if the path is not absolute). The absolute path cannot be DOS-style, - # because $ac_f cannot contain `:'. - test -f "$ac_f" || - case $ac_f in - [\\/$]*) false;; - *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";; - esac || - as_fn_error 1 "cannot find input file: \`$ac_f'" "$LINENO" 5;; - esac - case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac - as_fn_append ac_file_inputs " '$ac_f'" - done - - # Let's still pretend it is `configure' which instantiates (i.e., don't - # use $as_me), people would be surprised to read: - # /* config.h. Generated by config.status. */ - configure_input='Generated from '` - $as_echo "$*" | sed 's|^[^:]*/||;s|:[^:]*/|, |g' - `' by configure.' - if test x"$ac_file" != x-; then - configure_input="$ac_file. $configure_input" - { $as_echo "$as_me:${as_lineno-$LINENO}: creating $ac_file" >&5 -$as_echo "$as_me: creating $ac_file" >&6;} - fi - # Neutralize special characters interpreted by sed in replacement strings. - case $configure_input in #( - *\&* | *\|* | *\\* ) - ac_sed_conf_input=`$as_echo "$configure_input" | - sed 's/[\\\\&|]/\\\\&/g'`;; #( - *) ac_sed_conf_input=$configure_input;; - esac - - case $ac_tag in - *:-:* | *:-) cat >"$ac_tmp/stdin" \ - || as_fn_error $? "could not create $ac_file" "$LINENO" 5 ;; - esac - ;; - esac - - ac_dir=`$as_dirname -- "$ac_file" || -$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$ac_file" : 'X\(//\)[^/]' \| \ - X"$ac_file" : 'X\(//\)$' \| \ - X"$ac_file" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X"$ac_file" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - as_dir="$ac_dir"; as_fn_mkdir_p - ac_builddir=. - -case "$ac_dir" in -.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; -*) - ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'` - # A ".." for each directory in $ac_dir_suffix. - ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` - case $ac_top_builddir_sub in - "") ac_top_builddir_sub=. ac_top_build_prefix= ;; - *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; - esac ;; -esac -ac_abs_top_builddir=$ac_pwd -ac_abs_builddir=$ac_pwd$ac_dir_suffix -# for backward compatibility: -ac_top_builddir=$ac_top_build_prefix - -case $srcdir in - .) # We are building in place. - ac_srcdir=. - ac_top_srcdir=$ac_top_builddir_sub - ac_abs_top_srcdir=$ac_pwd ;; - [\\/]* | ?:[\\/]* ) # Absolute name. - ac_srcdir=$srcdir$ac_dir_suffix; - ac_top_srcdir=$srcdir - ac_abs_top_srcdir=$srcdir ;; - *) # Relative name. - ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix - ac_top_srcdir=$ac_top_build_prefix$srcdir - ac_abs_top_srcdir=$ac_pwd/$srcdir ;; -esac -ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix - - - case $ac_mode in - :F) - # - # CONFIG_FILE - # - - case $INSTALL in - [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;; - *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;; - esac - ac_MKDIR_P=$MKDIR_P - case $MKDIR_P in - [\\/$]* | ?:[\\/]* ) ;; - */*) ac_MKDIR_P=$ac_top_build_prefix$MKDIR_P ;; - esac -_ACEOF - -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -# If the template does not know about datarootdir, expand it. -# FIXME: This hack should be removed a few years after 2.60. -ac_datarootdir_hack=; ac_datarootdir_seen= -ac_sed_dataroot=' -/datarootdir/ { - p - q -} -/@datadir@/p -/@docdir@/p -/@infodir@/p -/@localedir@/p -/@mandir@/p' -case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in -*datarootdir*) ac_datarootdir_seen=yes;; -*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*) - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5 -$as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;} -_ACEOF -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 - ac_datarootdir_hack=' - s&@datadir@&$datadir&g - s&@docdir@&$docdir&g - s&@infodir@&$infodir&g - s&@localedir@&$localedir&g - s&@mandir@&$mandir&g - s&\\\${datarootdir}&$datarootdir&g' ;; -esac -_ACEOF - -# Neutralize VPATH when `$srcdir' = `.'. -# Shell code in configure.ac might set extrasub. -# FIXME: do we really want to maintain this feature? -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -ac_sed_extra="$ac_vpsub -$extrasub -_ACEOF -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -:t -/@[a-zA-Z_][a-zA-Z_0-9]*@/!b -s|@configure_input@|$ac_sed_conf_input|;t t -s&@top_builddir@&$ac_top_builddir_sub&;t t -s&@top_build_prefix@&$ac_top_build_prefix&;t t -s&@srcdir@&$ac_srcdir&;t t -s&@abs_srcdir@&$ac_abs_srcdir&;t t -s&@top_srcdir@&$ac_top_srcdir&;t t -s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t -s&@builddir@&$ac_builddir&;t t -s&@abs_builddir@&$ac_abs_builddir&;t t -s&@abs_top_builddir@&$ac_abs_top_builddir&;t t -s&@INSTALL@&$ac_INSTALL&;t t -s&@MKDIR_P@&$ac_MKDIR_P&;t t -$ac_datarootdir_hack -" -eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$ac_tmp/subs.awk" \ - >$ac_tmp/out || as_fn_error $? "could not create $ac_file" "$LINENO" 5 - -test -z "$ac_datarootdir_hack$ac_datarootdir_seen" && - { ac_out=`sed -n '/\${datarootdir}/p' "$ac_tmp/out"`; test -n "$ac_out"; } && - { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' \ - "$ac_tmp/out"`; test -z "$ac_out"; } && - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a reference to the variable \`datarootdir' -which seems to be undefined. Please make sure it is defined" >&5 -$as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir' -which seems to be undefined. Please make sure it is defined" >&2;} - - rm -f "$ac_tmp/stdin" - case $ac_file in - -) cat "$ac_tmp/out" && rm -f "$ac_tmp/out";; - *) rm -f "$ac_file" && mv "$ac_tmp/out" "$ac_file";; - esac \ - || as_fn_error $? "could not create $ac_file" "$LINENO" 5 - ;; - :H) - # - # CONFIG_HEADER - # - if test x"$ac_file" != x-; then - { - $as_echo "/* $configure_input */" \ - && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs" - } >"$ac_tmp/config.h" \ - || as_fn_error $? "could not create $ac_file" "$LINENO" 5 - if diff "$ac_file" "$ac_tmp/config.h" >/dev/null 2>&1; then - { $as_echo "$as_me:${as_lineno-$LINENO}: $ac_file is unchanged" >&5 -$as_echo "$as_me: $ac_file is unchanged" >&6;} - else - rm -f "$ac_file" - mv "$ac_tmp/config.h" "$ac_file" \ - || as_fn_error $? "could not create $ac_file" "$LINENO" 5 - fi - else - $as_echo "/* $configure_input */" \ - && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs" \ - || as_fn_error $? "could not create -" "$LINENO" 5 - fi -# Compute "$ac_file"'s index in $config_headers. -_am_arg="$ac_file" -_am_stamp_count=1 -for _am_header in $config_headers :; do - case $_am_header in - $_am_arg | $_am_arg:* ) - break ;; - * ) - _am_stamp_count=`expr $_am_stamp_count + 1` ;; - esac -done -echo "timestamp for $_am_arg" >`$as_dirname -- "$_am_arg" || -$as_expr X"$_am_arg" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$_am_arg" : 'X\(//\)[^/]' \| \ - X"$_am_arg" : 'X\(//\)$' \| \ - X"$_am_arg" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X"$_am_arg" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'`/stamp-h$_am_stamp_count - ;; - - :C) { $as_echo "$as_me:${as_lineno-$LINENO}: executing $ac_file commands" >&5 -$as_echo "$as_me: executing $ac_file commands" >&6;} - ;; - esac - - - case $ac_file$ac_mode in - "depfiles":C) test x"$AMDEP_TRUE" != x"" || { - # Autoconf 2.62 quotes --file arguments for eval, but not when files - # are listed without --file. Let's play safe and only enable the eval - # if we detect the quoting. - case $CONFIG_FILES in - *\'*) eval set x "$CONFIG_FILES" ;; - *) set x $CONFIG_FILES ;; - esac - shift - for mf - do - # Strip MF so we end up with the name of the file. - mf=`echo "$mf" | sed -e 's/:.*$//'` - # Check whether this is an Automake generated Makefile or not. - # We used to match only the files named `Makefile.in', but - # some people rename them; so instead we look at the file content. - # Grep'ing the first line is not enough: some people post-process - # each Makefile.in and add a new line on top of each file to say so. - # Grep'ing the whole file is not good either: AIX grep has a line - # limit of 2048, but all sed's we know have understand at least 4000. - if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then - dirpart=`$as_dirname -- "$mf" || -$as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$mf" : 'X\(//\)[^/]' \| \ - X"$mf" : 'X\(//\)$' \| \ - X"$mf" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X"$mf" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - else - continue - fi - # Extract the definition of DEPDIR, am__include, and am__quote - # from the Makefile without running `make'. - DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` - test -z "$DEPDIR" && continue - am__include=`sed -n 's/^am__include = //p' < "$mf"` - test -z "am__include" && continue - am__quote=`sed -n 's/^am__quote = //p' < "$mf"` - # When using ansi2knr, U may be empty or an underscore; expand it - U=`sed -n 's/^U = //p' < "$mf"` - # Find all dependency output files, they are included files with - # $(DEPDIR) in their names. We invoke sed twice because it is the - # simplest approach to changing $(DEPDIR) to its actual value in the - # expansion. - for file in `sed -n " - s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ - sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do - # Make sure the directory exists. - test -f "$dirpart/$file" && continue - fdir=`$as_dirname -- "$file" || -$as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$file" : 'X\(//\)[^/]' \| \ - X"$file" : 'X\(//\)$' \| \ - X"$file" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X"$file" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - as_dir=$dirpart/$fdir; as_fn_mkdir_p - # echo "creating $dirpart/$file" - echo '# dummy' > "$dirpart/$file" - done - done -} - ;; - "libtool":C) - - # See if we are running on zsh, and set the options which allow our - # commands through without removal of \ escapes. - if test -n "${ZSH_VERSION+set}" ; then - setopt NO_GLOB_SUBST - fi - - cfgfile="${ofile}T" - trap "$RM \"$cfgfile\"; exit 1" 1 2 15 - $RM "$cfgfile" - - cat <<_LT_EOF >> "$cfgfile" -#! $SHELL - -# `$ECHO "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services. -# Generated automatically by $as_me ($PACKAGE$TIMESTAMP) $VERSION -# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: -# NOTE: Changes made to this file will be lost: look at ltmain.sh. -# -# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, -# 2006, 2007, 2008, 2009, 2010 Free Software Foundation, -# Inc. -# Written by Gordon Matzigkeit, 1996 -# -# This file is part of GNU Libtool. -# -# GNU Libtool is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# As a special exception to the GNU General Public License, -# if you distribute this file as part of a program or library that -# is built using GNU Libtool, you may include this file under the -# same distribution terms that you use for the rest of that program. -# -# GNU Libtool is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with GNU Libtool; see the file COPYING. If not, a copy -# can be downloaded from http://www.gnu.org/licenses/gpl.html, or -# obtained by writing to the Free Software Foundation, Inc., -# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. - - -# The names of the tagged configurations supported by this script. -available_tags="" - -# ### BEGIN LIBTOOL CONFIG - -# Whether or not to build static libraries. -build_old_libs=$enable_static - -# Which release of libtool.m4 was used? -macro_version=$macro_version -macro_revision=$macro_revision - -# Whether or not to build shared libraries. -build_libtool_libs=$enable_shared - -# What type of objects to build. -pic_mode=$pic_mode - -# Whether or not to optimize for fast installation. -fast_install=$enable_fast_install - -# Shell to use when invoking shell scripts. -SHELL=$lt_SHELL - -# An echo program that protects backslashes. -ECHO=$lt_ECHO - -# The host system. -host_alias=$host_alias -host=$host -host_os=$host_os - -# The build system. -build_alias=$build_alias -build=$build -build_os=$build_os - -# A sed program that does not truncate output. -SED=$lt_SED - -# Sed that helps us avoid accidentally triggering echo(1) options like -n. -Xsed="\$SED -e 1s/^X//" - -# A grep program that handles long lines. -GREP=$lt_GREP - -# An ERE matcher. -EGREP=$lt_EGREP - -# A literal string matcher. -FGREP=$lt_FGREP - -# A BSD- or MS-compatible name lister. -NM=$lt_NM - -# Whether we need soft or hard links. -LN_S=$lt_LN_S - -# What is the maximum length of a command? -max_cmd_len=$max_cmd_len - -# Object file suffix (normally "o"). -objext=$ac_objext - -# Executable file suffix (normally ""). -exeext=$exeext - -# whether the shell understands "unset". -lt_unset=$lt_unset - -# turn spaces into newlines. -SP2NL=$lt_lt_SP2NL - -# turn newlines into spaces. -NL2SP=$lt_lt_NL2SP - -# convert \$build file names to \$host format. -to_host_file_cmd=$lt_cv_to_host_file_cmd - -# convert \$build files to toolchain format. -to_tool_file_cmd=$lt_cv_to_tool_file_cmd - -# An object symbol dumper. -OBJDUMP=$lt_OBJDUMP - -# Method to check whether dependent libraries are shared objects. -deplibs_check_method=$lt_deplibs_check_method - -# Command to use when deplibs_check_method = "file_magic". -file_magic_cmd=$lt_file_magic_cmd - -# How to find potential files when deplibs_check_method = "file_magic". -file_magic_glob=$lt_file_magic_glob - -# Find potential files using nocaseglob when deplibs_check_method = "file_magic". -want_nocaseglob=$lt_want_nocaseglob - -# DLL creation program. -DLLTOOL=$lt_DLLTOOL - -# Command to associate shared and link libraries. -sharedlib_from_linklib_cmd=$lt_sharedlib_from_linklib_cmd - -# The archiver. -AR=$lt_AR - -# Flags to create an archive. -AR_FLAGS=$lt_AR_FLAGS - -# How to feed a file listing to the archiver. -archiver_list_spec=$lt_archiver_list_spec - -# A symbol stripping program. -STRIP=$lt_STRIP - -# Commands used to install an old-style archive. -RANLIB=$lt_RANLIB -old_postinstall_cmds=$lt_old_postinstall_cmds -old_postuninstall_cmds=$lt_old_postuninstall_cmds - -# Whether to use a lock for old archive extraction. -lock_old_archive_extraction=$lock_old_archive_extraction - -# A C compiler. -LTCC=$lt_CC - -# LTCC compiler flags. -LTCFLAGS=$lt_CFLAGS - -# Take the output of nm and produce a listing of raw symbols and C names. -global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe - -# Transform the output of nm in a proper C declaration. -global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl - -# Transform the output of nm in a C name address pair. -global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address - -# Transform the output of nm in a C name address pair when lib prefix is needed. -global_symbol_to_c_name_address_lib_prefix=$lt_lt_cv_sys_global_symbol_to_c_name_address_lib_prefix - -# Specify filename containing input files for \$NM. -nm_file_list_spec=$lt_nm_file_list_spec - -# The root where to search for dependent libraries,and in which our libraries should be installed. -lt_sysroot=$lt_sysroot - -# The name of the directory that contains temporary libtool files. -objdir=$objdir - -# Used to examine libraries when file_magic_cmd begins with "file". -MAGIC_CMD=$MAGIC_CMD - -# Must we lock files when doing compilation? -need_locks=$lt_need_locks - -# Manifest tool. -MANIFEST_TOOL=$lt_MANIFEST_TOOL - -# Tool to manipulate archived DWARF debug symbol files on Mac OS X. -DSYMUTIL=$lt_DSYMUTIL - -# Tool to change global to local symbols on Mac OS X. -NMEDIT=$lt_NMEDIT - -# Tool to manipulate fat objects and archives on Mac OS X. -LIPO=$lt_LIPO - -# ldd/readelf like tool for Mach-O binaries on Mac OS X. -OTOOL=$lt_OTOOL - -# ldd/readelf like tool for 64 bit Mach-O binaries on Mac OS X 10.4. -OTOOL64=$lt_OTOOL64 - -# Old archive suffix (normally "a"). -libext=$libext - -# Shared library suffix (normally ".so"). -shrext_cmds=$lt_shrext_cmds - -# The commands to extract the exported symbol list from a shared archive. -extract_expsyms_cmds=$lt_extract_expsyms_cmds - -# Variables whose values should be saved in libtool wrapper scripts and -# restored at link time. -variables_saved_for_relink=$lt_variables_saved_for_relink - -# Do we need the "lib" prefix for modules? -need_lib_prefix=$need_lib_prefix - -# Do we need a version for libraries? -need_version=$need_version - -# Library versioning type. -version_type=$version_type - -# Shared library runtime path variable. -runpath_var=$runpath_var - -# Shared library path variable. -shlibpath_var=$shlibpath_var - -# Is shlibpath searched before the hard-coded library search path? -shlibpath_overrides_runpath=$shlibpath_overrides_runpath - -# Format of library name prefix. -libname_spec=$lt_libname_spec - -# List of archive names. First name is the real one, the rest are links. -# The last name is the one that the linker finds with -lNAME -library_names_spec=$lt_library_names_spec - -# The coded name of the library, if different from the real name. -soname_spec=$lt_soname_spec - -# Permission mode override for installation of shared libraries. -install_override_mode=$lt_install_override_mode - -# Command to use after installation of a shared archive. -postinstall_cmds=$lt_postinstall_cmds - -# Command to use after uninstallation of a shared archive. -postuninstall_cmds=$lt_postuninstall_cmds - -# Commands used to finish a libtool library installation in a directory. -finish_cmds=$lt_finish_cmds - -# As "finish_cmds", except a single script fragment to be evaled but -# not shown. -finish_eval=$lt_finish_eval - -# Whether we should hardcode library paths into libraries. -hardcode_into_libs=$hardcode_into_libs - -# Compile-time system search path for libraries. -sys_lib_search_path_spec=$lt_sys_lib_search_path_spec - -# Run-time system search path for libraries. -sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec - -# Whether dlopen is supported. -dlopen_support=$enable_dlopen - -# Whether dlopen of programs is supported. -dlopen_self=$enable_dlopen_self - -# Whether dlopen of statically linked programs is supported. -dlopen_self_static=$enable_dlopen_self_static - -# Commands to strip libraries. -old_striplib=$lt_old_striplib -striplib=$lt_striplib - - -# The linker used to build libraries. -LD=$lt_LD - -# How to create reloadable object files. -reload_flag=$lt_reload_flag -reload_cmds=$lt_reload_cmds - -# Commands used to build an old-style archive. -old_archive_cmds=$lt_old_archive_cmds - -# A language specific compiler. -CC=$lt_compiler - -# Is the compiler the GNU compiler? -with_gcc=$GCC - -# Compiler flag to turn off builtin functions. -no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag - -# Additional compiler flags for building library objects. -pic_flag=$lt_lt_prog_compiler_pic - -# How to pass a linker flag through the compiler. -wl=$lt_lt_prog_compiler_wl - -# Compiler flag to prevent dynamic linking. -link_static_flag=$lt_lt_prog_compiler_static - -# Does compiler simultaneously support -c and -o options? -compiler_c_o=$lt_lt_cv_prog_compiler_c_o - -# Whether or not to add -lc for building shared libraries. -build_libtool_need_lc=$archive_cmds_need_lc - -# Whether or not to disallow shared libs when runtime libs are static. -allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes - -# Compiler flag to allow reflexive dlopens. -export_dynamic_flag_spec=$lt_export_dynamic_flag_spec - -# Compiler flag to generate shared objects directly from archives. -whole_archive_flag_spec=$lt_whole_archive_flag_spec - -# Whether the compiler copes with passing no objects directly. -compiler_needs_object=$lt_compiler_needs_object - -# Create an old-style archive from a shared archive. -old_archive_from_new_cmds=$lt_old_archive_from_new_cmds - -# Create a temporary old-style archive to link instead of a shared archive. -old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds - -# Commands used to build a shared archive. -archive_cmds=$lt_archive_cmds -archive_expsym_cmds=$lt_archive_expsym_cmds - -# Commands used to build a loadable module if different from building -# a shared archive. -module_cmds=$lt_module_cmds -module_expsym_cmds=$lt_module_expsym_cmds - -# Whether we are building with GNU ld or not. -with_gnu_ld=$lt_with_gnu_ld - -# Flag that allows shared libraries with undefined symbols to be built. -allow_undefined_flag=$lt_allow_undefined_flag - -# Flag that enforces no undefined symbols. -no_undefined_flag=$lt_no_undefined_flag - -# Flag to hardcode \$libdir into a binary during linking. -# This must work even if \$libdir does not exist -hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec - -# If ld is used when linking, flag to hardcode \$libdir into a binary -# during linking. This must work even if \$libdir does not exist. -hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld - -# Whether we need a single "-rpath" flag with a separated argument. -hardcode_libdir_separator=$lt_hardcode_libdir_separator - -# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes -# DIR into the resulting binary. -hardcode_direct=$hardcode_direct - -# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes -# DIR into the resulting binary and the resulting library dependency is -# "absolute",i.e impossible to change by setting \${shlibpath_var} if the -# library is relocated. -hardcode_direct_absolute=$hardcode_direct_absolute - -# Set to "yes" if using the -LDIR flag during linking hardcodes DIR -# into the resulting binary. -hardcode_minus_L=$hardcode_minus_L - -# Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR -# into the resulting binary. -hardcode_shlibpath_var=$hardcode_shlibpath_var - -# Set to "yes" if building a shared library automatically hardcodes DIR -# into the library and all subsequent libraries and executables linked -# against it. -hardcode_automatic=$hardcode_automatic - -# Set to yes if linker adds runtime paths of dependent libraries -# to runtime path list. -inherit_rpath=$inherit_rpath - -# Whether libtool must link a program against all its dependency libraries. -link_all_deplibs=$link_all_deplibs - -# Set to "yes" if exported symbols are required. -always_export_symbols=$always_export_symbols - -# The commands to list exported symbols. -export_symbols_cmds=$lt_export_symbols_cmds - -# Symbols that should not be listed in the preloaded symbols. -exclude_expsyms=$lt_exclude_expsyms - -# Symbols that must always be exported. -include_expsyms=$lt_include_expsyms - -# Commands necessary for linking programs (against libraries) with templates. -prelink_cmds=$lt_prelink_cmds - -# Commands necessary for finishing linking programs. -postlink_cmds=$lt_postlink_cmds - -# Specify filename containing input files. -file_list_spec=$lt_file_list_spec - -# How to hardcode a shared library path into an executable. -hardcode_action=$hardcode_action - -# ### END LIBTOOL CONFIG - -_LT_EOF - - case $host_os in - aix3*) - cat <<\_LT_EOF >> "$cfgfile" -# AIX sometimes has problems with the GCC collect2 program. For some -# reason, if we set the COLLECT_NAMES environment variable, the problems -# vanish in a puff of smoke. -if test "X${COLLECT_NAMES+set}" != Xset; then - COLLECT_NAMES= - export COLLECT_NAMES -fi -_LT_EOF - ;; - esac - - -ltmain="$ac_aux_dir/ltmain.sh" - - - # We use sed instead of cat because bash on DJGPP gets confused if - # if finds mixed CR/LF and LF-only lines. Since sed operates in - # text mode, it properly converts lines to CR/LF. This bash problem - # is reportedly fixed, but why not run on old versions too? - sed '$q' "$ltmain" >> "$cfgfile" \ - || (rm -f "$cfgfile"; exit 1) - - if test x"$xsi_shell" = xyes; then - sed -e '/^func_dirname ()$/,/^} # func_dirname /c\ -func_dirname ()\ -{\ -\ case ${1} in\ -\ */*) func_dirname_result="${1%/*}${2}" ;;\ -\ * ) func_dirname_result="${3}" ;;\ -\ esac\ -} # Extended-shell func_dirname implementation' "$cfgfile" > $cfgfile.tmp \ - && mv -f "$cfgfile.tmp" "$cfgfile" \ - || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") -test 0 -eq $? || _lt_function_replace_fail=: - - - sed -e '/^func_basename ()$/,/^} # func_basename /c\ -func_basename ()\ -{\ -\ func_basename_result="${1##*/}"\ -} # Extended-shell func_basename implementation' "$cfgfile" > $cfgfile.tmp \ - && mv -f "$cfgfile.tmp" "$cfgfile" \ - || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") -test 0 -eq $? || _lt_function_replace_fail=: - - - sed -e '/^func_dirname_and_basename ()$/,/^} # func_dirname_and_basename /c\ -func_dirname_and_basename ()\ -{\ -\ case ${1} in\ -\ */*) func_dirname_result="${1%/*}${2}" ;;\ -\ * ) func_dirname_result="${3}" ;;\ -\ esac\ -\ func_basename_result="${1##*/}"\ -} # Extended-shell func_dirname_and_basename implementation' "$cfgfile" > $cfgfile.tmp \ - && mv -f "$cfgfile.tmp" "$cfgfile" \ - || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") -test 0 -eq $? || _lt_function_replace_fail=: - - - sed -e '/^func_stripname ()$/,/^} # func_stripname /c\ -func_stripname ()\ -{\ -\ # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are\ -\ # positional parameters, so assign one to ordinary parameter first.\ -\ func_stripname_result=${3}\ -\ func_stripname_result=${func_stripname_result#"${1}"}\ -\ func_stripname_result=${func_stripname_result%"${2}"}\ -} # Extended-shell func_stripname implementation' "$cfgfile" > $cfgfile.tmp \ - && mv -f "$cfgfile.tmp" "$cfgfile" \ - || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") -test 0 -eq $? || _lt_function_replace_fail=: - - - sed -e '/^func_split_long_opt ()$/,/^} # func_split_long_opt /c\ -func_split_long_opt ()\ -{\ -\ func_split_long_opt_name=${1%%=*}\ -\ func_split_long_opt_arg=${1#*=}\ -} # Extended-shell func_split_long_opt implementation' "$cfgfile" > $cfgfile.tmp \ - && mv -f "$cfgfile.tmp" "$cfgfile" \ - || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") -test 0 -eq $? || _lt_function_replace_fail=: - - - sed -e '/^func_split_short_opt ()$/,/^} # func_split_short_opt /c\ -func_split_short_opt ()\ -{\ -\ func_split_short_opt_arg=${1#??}\ -\ func_split_short_opt_name=${1%"$func_split_short_opt_arg"}\ -} # Extended-shell func_split_short_opt implementation' "$cfgfile" > $cfgfile.tmp \ - && mv -f "$cfgfile.tmp" "$cfgfile" \ - || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") -test 0 -eq $? || _lt_function_replace_fail=: - - - sed -e '/^func_lo2o ()$/,/^} # func_lo2o /c\ -func_lo2o ()\ -{\ -\ case ${1} in\ -\ *.lo) func_lo2o_result=${1%.lo}.${objext} ;;\ -\ *) func_lo2o_result=${1} ;;\ -\ esac\ -} # Extended-shell func_lo2o implementation' "$cfgfile" > $cfgfile.tmp \ - && mv -f "$cfgfile.tmp" "$cfgfile" \ - || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") -test 0 -eq $? || _lt_function_replace_fail=: - - - sed -e '/^func_xform ()$/,/^} # func_xform /c\ -func_xform ()\ -{\ - func_xform_result=${1%.*}.lo\ -} # Extended-shell func_xform implementation' "$cfgfile" > $cfgfile.tmp \ - && mv -f "$cfgfile.tmp" "$cfgfile" \ - || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") -test 0 -eq $? || _lt_function_replace_fail=: - - - sed -e '/^func_arith ()$/,/^} # func_arith /c\ -func_arith ()\ -{\ - func_arith_result=$(( $* ))\ -} # Extended-shell func_arith implementation' "$cfgfile" > $cfgfile.tmp \ - && mv -f "$cfgfile.tmp" "$cfgfile" \ - || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") -test 0 -eq $? || _lt_function_replace_fail=: - - - sed -e '/^func_len ()$/,/^} # func_len /c\ -func_len ()\ -{\ - func_len_result=${#1}\ -} # Extended-shell func_len implementation' "$cfgfile" > $cfgfile.tmp \ - && mv -f "$cfgfile.tmp" "$cfgfile" \ - || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") -test 0 -eq $? || _lt_function_replace_fail=: - -fi - -if test x"$lt_shell_append" = xyes; then - sed -e '/^func_append ()$/,/^} # func_append /c\ -func_append ()\ -{\ - eval "${1}+=\\${2}"\ -} # Extended-shell func_append implementation' "$cfgfile" > $cfgfile.tmp \ - && mv -f "$cfgfile.tmp" "$cfgfile" \ - || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") -test 0 -eq $? || _lt_function_replace_fail=: - - - sed -e '/^func_append_quoted ()$/,/^} # func_append_quoted /c\ -func_append_quoted ()\ -{\ -\ func_quote_for_eval "${2}"\ -\ eval "${1}+=\\\\ \\$func_quote_for_eval_result"\ -} # Extended-shell func_append_quoted implementation' "$cfgfile" > $cfgfile.tmp \ - && mv -f "$cfgfile.tmp" "$cfgfile" \ - || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") -test 0 -eq $? || _lt_function_replace_fail=: - - - # Save a `func_append' function call where possible by direct use of '+=' - sed -e 's%func_append \([a-zA-Z_]\{1,\}\) "%\1+="%g' $cfgfile > $cfgfile.tmp \ - && mv -f "$cfgfile.tmp" "$cfgfile" \ - || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") - test 0 -eq $? || _lt_function_replace_fail=: -else - # Save a `func_append' function call even when '+=' is not available - sed -e 's%func_append \([a-zA-Z_]\{1,\}\) "%\1="$\1%g' $cfgfile > $cfgfile.tmp \ - && mv -f "$cfgfile.tmp" "$cfgfile" \ - || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") - test 0 -eq $? || _lt_function_replace_fail=: -fi - -if test x"$_lt_function_replace_fail" = x":"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Unable to substitute extended shell functions in $ofile" >&5 -$as_echo "$as_me: WARNING: Unable to substitute extended shell functions in $ofile" >&2;} -fi - - - mv -f "$cfgfile" "$ofile" || - (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile") - chmod +x "$ofile" - - ;; - - esac -done # for ac_tag - - -as_fn_exit 0 -_ACEOF -ac_clean_files=$ac_clean_files_save - -test $ac_write_fail = 0 || - as_fn_error $? "write failure creating $CONFIG_STATUS" "$LINENO" 5 - - -# configure is writing to config.log, and then calls config.status. -# config.status does its own redirection, appending to config.log. -# Unfortunately, on DOS this fails, as config.log is still kept open -# by configure, so config.status won't be able to write to it; its -# output is simply discarded. So we exec the FD to /dev/null, -# effectively closing config.log, so it can be properly (re)opened and -# appended to by config.status. When coming back to configure, we -# need to make the FD available again. -if test "$no_create" != yes; then - ac_cs_success=: - ac_config_status_args= - test "$silent" = yes && - ac_config_status_args="$ac_config_status_args --quiet" - exec 5>/dev/null - $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false - exec 5>>config.log - # Use ||, not &&, to avoid exiting from the if with $? = 1, which - # would make configure fail if this is the last instruction. - $ac_cs_success || as_fn_exit 1 -fi -if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: unrecognized options: $ac_unrecognized_opts" >&5 -$as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2;} -fi diff -Nru libshairport-1.2.0.20310.1/autom4te.cache/requests libshairport-1.2.1~git20120110.aeb4987/autom4te.cache/requests --- libshairport-1.2.0.20310.1/autom4te.cache/requests 2011-11-10 19:35:57.000000000 +0000 +++ libshairport-1.2.1~git20120110.aeb4987/autom4te.cache/requests 1970-01-01 00:00:00.000000000 +0000 @@ -1,288 +0,0 @@ -# This file was generated by Autom4te Sun May 1 09:53:53 UTC 2011. -# It contains the lists of macros which have been traced. -# It can be safely removed. - -@request = ( - bless( [ - '0', - 1, - [ - '/usr/share/autoconf' - ], - [ - '/usr/share/autoconf/autoconf/autoconf.m4f', - '/usr/share/aclocal/argz.m4', - '/usr/share/aclocal/libtool.m4', - '/usr/share/aclocal/ltdl.m4', - '/usr/share/aclocal/ltoptions.m4', - '/usr/share/aclocal/ltsugar.m4', - '/usr/share/aclocal/ltversion.m4', - '/usr/share/aclocal/lt~obsolete.m4', - '/usr/share/aclocal-1.11/amversion.m4', - '/usr/share/aclocal-1.11/auxdir.m4', - '/usr/share/aclocal-1.11/cond.m4', - '/usr/share/aclocal-1.11/depend.m4', - '/usr/share/aclocal-1.11/depout.m4', - '/usr/share/aclocal-1.11/init.m4', - '/usr/share/aclocal-1.11/install-sh.m4', - '/usr/share/aclocal-1.11/lead-dot.m4', - '/usr/share/aclocal-1.11/make.m4', - '/usr/share/aclocal-1.11/missing.m4', - '/usr/share/aclocal-1.11/mkdirp.m4', - '/usr/share/aclocal-1.11/options.m4', - '/usr/share/aclocal-1.11/runlog.m4', - '/usr/share/aclocal-1.11/sanity.m4', - '/usr/share/aclocal-1.11/silent.m4', - '/usr/share/aclocal-1.11/strip.m4', - '/usr/share/aclocal-1.11/substnot.m4', - '/usr/share/aclocal-1.11/tar.m4', - 'configure.in' - ], - { - 'AM_ENABLE_STATIC' => 1, - 'AC_LIBTOOL_LANG_RC_CONFIG' => 1, - '_LT_AC_SHELL_INIT' => 1, - 'AC_DEFUN' => 1, - '_LT_AC_LANG_CXX_CONFIG' => 1, - 'AC_PROG_LIBTOOL' => 1, - 'AM_PROG_MKDIR_P' => 1, - 'AM_AUTOMAKE_VERSION' => 1, - 'AM_SUBST_NOTMAKE' => 1, - 'AM_MISSING_PROG' => 1, - 'AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH' => 1, - '_LT_AC_LANG_C_CONFIG' => 1, - 'AM_PROG_INSTALL_STRIP' => 1, - '_m4_warn' => 1, - 'AC_LIBTOOL_OBJDIR' => 1, - 'gl_FUNC_ARGZ' => 1, - 'LTOBSOLETE_VERSION' => 1, - 'AM_SANITY_CHECK' => 1, - 'AC_LIBTOOL_LANG_GCJ_CONFIG' => 1, - 'AC_LIBTOOL_PROG_COMPILER_PIC' => 1, - 'LT_LIB_M' => 1, - '_LT_AC_CHECK_DLFCN' => 1, - 'AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE' => 1, - 'LTSUGAR_VERSION' => 1, - '_LT_PROG_LTMAIN' => 1, - 'LT_SYS_SYMBOL_USCORE' => 1, - '_AM_PROG_TAR' => 1, - 'AC_LIBTOOL_GCJ' => 1, - '_LT_WITH_SYSROOT' => 1, - 'LT_SYS_DLOPEN_DEPLIBS' => 1, - 'LT_FUNC_DLSYM_USCORE' => 1, - 'AC_LIBTOOL_CONFIG' => 1, - '_LT_AC_LANG_F77' => 1, - '_AM_SUBST_NOTMAKE' => 1, - 'AC_LTDL_DLLIB' => 1, - '_AM_AUTOCONF_VERSION' => 1, - 'AM_DISABLE_SHARED' => 1, - '_LT_PROG_ECHO_BACKSLASH' => 1, - '_LTDL_SETUP' => 1, - '_LT_AC_LANG_CXX' => 1, - 'AM_PROG_LIBTOOL' => 1, - 'AC_LIB_LTDL' => 1, - '_LT_AC_FILE_LTDLL_C' => 1, - 'AM_PROG_LD' => 1, - 'AU_DEFUN' => 1, - 'AC_PROG_NM' => 1, - 'AC_LIBTOOL_DLOPEN' => 1, - 'AC_PROG_LD' => 1, - 'AC_ENABLE_FAST_INSTALL' => 1, - 'AC_PROG_LD_GNU' => 1, - 'AC_LIBTOOL_FC' => 1, - 'LTDL_CONVENIENCE' => 1, - '_AM_SET_OPTION' => 1, - 'AC_LTDL_PREOPEN' => 1, - '_LT_LINKER_BOILERPLATE' => 1, - '_LT_PREPARE_SED_QUOTE_VARS' => 1, - 'AC_LIBTOOL_LANG_CXX_CONFIG' => 1, - 'AC_LIBTOOL_PROG_CC_C_O' => 1, - 'gl_PREREQ_ARGZ' => 1, - 'LT_SUPPORTED_TAG' => 1, - 'AM_OUTPUT_DEPENDENCY_COMMANDS' => 1, - 'LT_PROG_RC' => 1, - 'LT_SYS_MODULE_EXT' => 1, - 'AC_DEFUN_ONCE' => 1, - '_LT_AC_LANG_GCJ' => 1, - 'AC_LTDL_OBJDIR' => 1, - '_LT_PATH_TOOL_PREFIX' => 1, - 'AC_LIBTOOL_RC' => 1, - 'AM_SILENT_RULES' => 1, - '_LT_AC_PROG_ECHO_BACKSLASH' => 1, - 'AC_DISABLE_FAST_INSTALL' => 1, - '_LT_AC_SYS_LIBPATH_AIX' => 1, - '_LT_AC_TRY_DLOPEN_SELF' => 1, - 'include' => 1, - 'LT_AC_PROG_SED' => 1, - 'AM_ENABLE_SHARED' => 1, - 'LTDL_INSTALLABLE' => 1, - '_LT_AC_LANG_GCJ_CONFIG' => 1, - 'AC_ENABLE_SHARED' => 1, - 'AC_LIBTOOL_SYS_HARD_LINK_LOCKS' => 1, - '_LT_REQUIRED_DARWIN_CHECKS' => 1, - 'AC_ENABLE_STATIC' => 1, - '_LT_AC_TAGVAR' => 1, - 'AC_LIBTOOL_LANG_F77_CONFIG' => 1, - 'AM_CONDITIONAL' => 1, - 'LT_LIB_DLLOAD' => 1, - 'LTVERSION_VERSION' => 1, - 'LTDL_INIT' => 1, - '_LT_PROG_F77' => 1, - '_LT_PROG_CXX' => 1, - 'AM_PROG_INSTALL_SH' => 1, - 'm4_include' => 1, - 'AC_PROG_EGREP' => 1, - '_AC_AM_CONFIG_HEADER_HOOK' => 1, - 'AC_PATH_MAGIC' => 1, - 'AC_LTDL_SYSSEARCHPATH' => 1, - 'AM_MAKE_INCLUDE' => 1, - '_LT_AC_TAGCONFIG' => 1, - 'LT_CMD_MAX_LEN' => 1, - 'm4_pattern_forbid' => 1, - '_LT_LINKER_OPTION' => 1, - 'AC_LIBTOOL_COMPILER_OPTION' => 1, - 'AC_DISABLE_SHARED' => 1, - '_LT_COMPILER_BOILERPLATE' => 1, - 'AC_LIBTOOL_WIN32_DLL' => 1, - 'AC_LIBTOOL_SETUP' => 1, - 'AC_PROG_LD_RELOAD_FLAG' => 1, - 'AC_LTDL_DLSYM_USCORE' => 1, - 'AM_MISSING_HAS_RUN' => 1, - 'LT_LANG' => 1, - 'LT_SYS_DLSEARCH_PATH' => 1, - 'LT_CONFIG_LTDL_DIR' => 1, - 'AC_LIBTOOL_DLOPEN_SELF' => 1, - 'LT_OUTPUT' => 1, - 'AC_LIBTOOL_PROG_LD_SHLIBS' => 1, - 'AC_WITH_LTDL' => 1, - 'AC_LIBTOOL_LINKER_OPTION' => 1, - 'LT_AC_PROG_RC' => 1, - 'AC_LIBTOOL_CXX' => 1, - 'LT_INIT' => 1, - 'LT_AC_PROG_GCJ' => 1, - 'LT_SYS_DLOPEN_SELF' => 1, - 'AM_DISABLE_STATIC' => 1, - 'AM_DEP_TRACK' => 1, - '_LT_AC_PROG_CXXCPP' => 1, - '_AC_PROG_LIBTOOL' => 1, - '_AM_IF_OPTION' => 1, - 'AC_PATH_TOOL_PREFIX' => 1, - 'AC_LIBTOOL_F77' => 1, - 'm4_pattern_allow' => 1, - 'AM_SET_LEADING_DOT' => 1, - '_LT_PROG_FC' => 1, - 'LT_AC_PROG_EGREP' => 1, - '_AM_DEPENDENCIES' => 1, - 'AC_LIBTOOL_LANG_C_CONFIG' => 1, - 'LTOPTIONS_VERSION' => 1, - '_LT_AC_SYS_COMPILER' => 1, - 'AM_PROG_NM' => 1, - 'AC_LIBLTDL_CONVENIENCE' => 1, - 'AC_DEPLIBS_CHECK_METHOD' => 1, - 'AM_SET_CURRENT_AUTOMAKE_VERSION' => 1, - 'AC_LIBLTDL_INSTALLABLE' => 1, - 'AC_LTDL_ENABLE_INSTALL' => 1, - 'AC_LIBTOOL_SYS_DYNAMIC_LINKER' => 1, - 'LT_PROG_GCJ' => 1, - 'AM_INIT_AUTOMAKE' => 1, - 'AC_DISABLE_STATIC' => 1, - 'LT_PATH_NM' => 1, - 'AC_LTDL_SHLIBEXT' => 1, - '_LT_AC_LOCK' => 1, - '_LT_AC_LANG_RC_CONFIG' => 1, - 'LT_SYS_MODULE_PATH' => 1, - 'AC_LIBTOOL_POSTDEP_PREDEP' => 1, - 'LT_WITH_LTDL' => 1, - 'AC_LTDL_SHLIBPATH' => 1, - 'AM_AUX_DIR_EXPAND' => 1, - '_LT_AC_LANG_F77_CONFIG' => 1, - 'AC_LIBTOOL_PROG_COMPILER_NO_RTTI' => 1, - '_AM_SET_OPTIONS' => 1, - '_LT_COMPILER_OPTION' => 1, - '_AM_OUTPUT_DEPENDENCY_COMMANDS' => 1, - 'AM_RUN_LOG' => 1, - 'AC_LIBTOOL_SYS_OLD_ARCHIVE' => 1, - 'AC_LTDL_SYS_DLOPEN_DEPLIBS' => 1, - 'AC_LIBTOOL_PICMODE' => 1, - 'LT_PATH_LD' => 1, - 'AC_CHECK_LIBM' => 1, - 'AC_LIBTOOL_SYS_LIB_STRIP' => 1, - '_AM_MANGLE_OPTION' => 1, - 'AC_LTDL_SYMBOL_USCORE' => 1, - 'AC_LIBTOOL_SYS_MAX_CMD_LEN' => 1, - 'AM_SET_DEPDIR' => 1, - '_LT_CC_BASENAME' => 1, - '_LT_LIBOBJ' => 1 - } - ], 'Autom4te::Request' ), - bless( [ - '1', - 1, - [ - '/usr/share/autoconf' - ], - [ - '/usr/share/autoconf/autoconf/autoconf.m4f', - 'aclocal.m4', - 'configure.in' - ], - { - '_LT_AC_TAGCONFIG' => 1, - 'AM_PROG_F77_C_O' => 1, - 'm4_pattern_forbid' => 1, - 'AC_INIT' => 1, - '_AM_COND_IF' => 1, - 'AC_CANONICAL_TARGET' => 1, - 'AC_SUBST' => 1, - 'AC_CONFIG_LIBOBJ_DIR' => 1, - 'AC_FC_SRCEXT' => 1, - 'AC_CANONICAL_HOST' => 1, - 'AC_PROG_LIBTOOL' => 1, - 'AM_INIT_AUTOMAKE' => 1, - 'AM_PATH_GUILE' => 1, - 'AC_CONFIG_SUBDIRS' => 1, - 'AM_AUTOMAKE_VERSION' => 1, - 'LT_CONFIG_LTDL_DIR' => 1, - 'AC_REQUIRE_AUX_FILE' => 1, - 'AC_CONFIG_LINKS' => 1, - 'm4_sinclude' => 1, - 'LT_SUPPORTED_TAG' => 1, - 'AM_MAINTAINER_MODE' => 1, - 'AM_NLS' => 1, - 'AM_GNU_GETTEXT_INTL_SUBDIR' => 1, - 'AM_MAKEFILE_INCLUDE' => 1, - '_m4_warn' => 1, - 'AM_PROG_CXX_C_O' => 1, - '_AM_COND_ENDIF' => 1, - '_AM_MAKEFILE_INCLUDE' => 1, - 'AM_ENABLE_MULTILIB' => 1, - 'AM_SILENT_RULES' => 1, - 'AM_PROG_MOC' => 1, - 'AC_CONFIG_FILES' => 1, - 'LT_INIT' => 1, - 'include' => 1, - 'AM_PROG_AR' => 1, - 'AM_GNU_GETTEXT' => 1, - 'AC_LIBSOURCE' => 1, - 'AM_PROG_FC_C_O' => 1, - 'AC_CANONICAL_BUILD' => 1, - 'AC_FC_FREEFORM' => 1, - 'AH_OUTPUT' => 1, - '_AM_SUBST_NOTMAKE' => 1, - 'AC_CONFIG_AUX_DIR' => 1, - 'sinclude' => 1, - 'AM_PROG_CC_C_O' => 1, - 'm4_pattern_allow' => 1, - 'AM_XGETTEXT_OPTION' => 1, - 'AC_CANONICAL_SYSTEM' => 1, - 'AM_CONDITIONAL' => 1, - 'AC_CONFIG_HEADERS' => 1, - 'AC_DEFINE_TRACE_LITERAL' => 1, - 'AM_POT_TOOLS' => 1, - 'm4_include' => 1, - '_AM_COND_ELSE' => 1, - 'AC_SUBST_TRACE' => 1 - } - ], 'Autom4te::Request' ) - ); - diff -Nru libshairport-1.2.0.20310.1/autom4te.cache/traces.0 libshairport-1.2.1~git20120110.aeb4987/autom4te.cache/traces.0 --- libshairport-1.2.0.20310.1/autom4te.cache/traces.0 2011-11-10 19:35:47.000000000 +0000 +++ libshairport-1.2.1~git20120110.aeb4987/autom4te.cache/traces.0 1970-01-01 00:00:00.000000000 +0000 @@ -1,2390 +0,0 @@ -m4trace:/usr/share/aclocal/argz.m4:12: -1- AC_DEFUN([gl_FUNC_ARGZ], [gl_PREREQ_ARGZ - -AC_CHECK_HEADERS([argz.h], [], [], [AC_INCLUDES_DEFAULT]) - -AC_CHECK_TYPES([error_t], - [], - [AC_DEFINE([error_t], [int], - [Define to a type to use for `error_t' if it is not otherwise available.]) - AC_DEFINE([__error_t_defined], [1], [Define so that glibc/gnulib argp.h - does not typedef error_t.])], - [#if defined(HAVE_ARGZ_H) -# include -#endif]) - -ARGZ_H= -AC_CHECK_FUNCS([argz_add argz_append argz_count argz_create_sep argz_insert \ - argz_next argz_stringify], [], [ARGZ_H=argz.h; AC_LIBOBJ([argz])]) - -dnl if have system argz functions, allow forced use of -dnl libltdl-supplied implementation (and default to do so -dnl on "known bad" systems). Could use a runtime check, but -dnl (a) detecting malloc issues is notoriously unreliable -dnl (b) only known system that declares argz functions, -dnl provides them, yet they are broken, is cygwin -dnl releases prior to 16-Mar-2007 (1.5.24 and earlier) -dnl So, it's more straightforward simply to special case -dnl this for known bad systems. -AS_IF([test -z "$ARGZ_H"], - [AC_CACHE_CHECK( - [if argz actually works], - [lt_cv_sys_argz_works], - [[case $host_os in #( - *cygwin*) - lt_cv_sys_argz_works=no - if test "$cross_compiling" != no; then - lt_cv_sys_argz_works="guessing no" - else - lt_sed_extract_leading_digits='s/^\([0-9\.]*\).*/\1/' - save_IFS=$IFS - IFS=-. - set x `uname -r | sed -e "$lt_sed_extract_leading_digits"` - IFS=$save_IFS - lt_os_major=${2-0} - lt_os_minor=${3-0} - lt_os_micro=${4-0} - if test "$lt_os_major" -gt 1 \ - || { test "$lt_os_major" -eq 1 \ - && { test "$lt_os_minor" -gt 5 \ - || { test "$lt_os_minor" -eq 5 \ - && test "$lt_os_micro" -gt 24; }; }; }; then - lt_cv_sys_argz_works=yes - fi - fi - ;; #( - *) lt_cv_sys_argz_works=yes ;; - esac]]) - AS_IF([test "$lt_cv_sys_argz_works" = yes], - [AC_DEFINE([HAVE_WORKING_ARGZ], 1, - [This value is set to 1 to indicate that the system argz facility works])], - [ARGZ_H=argz.h - AC_LIBOBJ([argz])])]) - -AC_SUBST([ARGZ_H]) -]) -m4trace:/usr/share/aclocal/argz.m4:79: -1- AC_DEFUN([gl_PREREQ_ARGZ], [:]) -m4trace:/usr/share/aclocal/libtool.m4:69: -1- AC_DEFUN([LT_INIT], [AC_PREREQ([2.58])dnl We use AC_INCLUDES_DEFAULT -AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT])dnl -AC_BEFORE([$0], [LT_LANG])dnl -AC_BEFORE([$0], [LT_OUTPUT])dnl -AC_BEFORE([$0], [LTDL_INIT])dnl -m4_require([_LT_CHECK_BUILDDIR])dnl - -dnl Autoconf doesn't catch unexpanded LT_ macros by default: -m4_pattern_forbid([^_?LT_[A-Z_]+$])dnl -m4_pattern_allow([^(_LT_EOF|LT_DLGLOBAL|LT_DLLAZY_OR_NOW|LT_MULTI_MODULE)$])dnl -dnl aclocal doesn't pull ltoptions.m4, ltsugar.m4, or ltversion.m4 -dnl unless we require an AC_DEFUNed macro: -AC_REQUIRE([LTOPTIONS_VERSION])dnl -AC_REQUIRE([LTSUGAR_VERSION])dnl -AC_REQUIRE([LTVERSION_VERSION])dnl -AC_REQUIRE([LTOBSOLETE_VERSION])dnl -m4_require([_LT_PROG_LTMAIN])dnl - -_LT_SHELL_INIT([SHELL=${CONFIG_SHELL-/bin/sh}]) - -dnl Parse OPTIONS -_LT_SET_OPTIONS([$0], [$1]) - -# This can be used to rebuild libtool when needed -LIBTOOL_DEPS="$ltmain" - -# Always use our own libtool. -LIBTOOL='$(SHELL) $(top_builddir)/libtool' -AC_SUBST(LIBTOOL)dnl - -_LT_SETUP - -# Only expand once: -m4_define([LT_INIT]) -]) -m4trace:/usr/share/aclocal/libtool.m4:107: -1- AU_DEFUN([AC_PROG_LIBTOOL], [m4_if($#, 0, [LT_INIT], [LT_INIT($@)])]) -m4trace:/usr/share/aclocal/libtool.m4:107: -1- AC_DEFUN([AC_PROG_LIBTOOL], [AC_DIAGNOSE([obsolete], [The macro `AC_PROG_LIBTOOL' is obsolete. -You should run autoupdate.])dnl -m4_if($#, 0, [LT_INIT], [LT_INIT($@)])]) -m4trace:/usr/share/aclocal/libtool.m4:108: -1- AU_DEFUN([AM_PROG_LIBTOOL], [m4_if($#, 0, [LT_INIT], [LT_INIT($@)])]) -m4trace:/usr/share/aclocal/libtool.m4:108: -1- AC_DEFUN([AM_PROG_LIBTOOL], [AC_DIAGNOSE([obsolete], [The macro `AM_PROG_LIBTOOL' is obsolete. -You should run autoupdate.])dnl -m4_if($#, 0, [LT_INIT], [LT_INIT($@)])]) -m4trace:/usr/share/aclocal/libtool.m4:607: -1- AC_DEFUN([LT_OUTPUT], [: ${CONFIG_LT=./config.lt} -AC_MSG_NOTICE([creating $CONFIG_LT]) -_LT_GENERATED_FILE_INIT(["$CONFIG_LT"], -[# Run this file to recreate a libtool stub with the current configuration.]) - -cat >>"$CONFIG_LT" <<\_LTEOF -lt_cl_silent=false -exec AS_MESSAGE_LOG_FD>>config.log -{ - echo - AS_BOX([Running $as_me.]) -} >&AS_MESSAGE_LOG_FD - -lt_cl_help="\ -\`$as_me' creates a local libtool stub from the current configuration, -for use in further configure time tests before the real libtool is -generated. - -Usage: $[0] [[OPTIONS]] - - -h, --help print this help, then exit - -V, --version print version number, then exit - -q, --quiet do not print progress messages - -d, --debug don't remove temporary files - -Report bugs to ." - -lt_cl_version="\ -m4_ifset([AC_PACKAGE_NAME], [AC_PACKAGE_NAME ])config.lt[]dnl -m4_ifset([AC_PACKAGE_VERSION], [ AC_PACKAGE_VERSION]) -configured by $[0], generated by m4_PACKAGE_STRING. - -Copyright (C) 2010 Free Software Foundation, Inc. -This config.lt script is free software; the Free Software Foundation -gives unlimited permision to copy, distribute and modify it." - -while test $[#] != 0 -do - case $[1] in - --version | --v* | -V ) - echo "$lt_cl_version"; exit 0 ;; - --help | --h* | -h ) - echo "$lt_cl_help"; exit 0 ;; - --debug | --d* | -d ) - debug=: ;; - --quiet | --q* | --silent | --s* | -q ) - lt_cl_silent=: ;; - - -*) AC_MSG_ERROR([unrecognized option: $[1] -Try \`$[0] --help' for more information.]) ;; - - *) AC_MSG_ERROR([unrecognized argument: $[1] -Try \`$[0] --help' for more information.]) ;; - esac - shift -done - -if $lt_cl_silent; then - exec AS_MESSAGE_FD>/dev/null -fi -_LTEOF - -cat >>"$CONFIG_LT" <<_LTEOF -_LT_OUTPUT_LIBTOOL_COMMANDS_INIT -_LTEOF - -cat >>"$CONFIG_LT" <<\_LTEOF -AC_MSG_NOTICE([creating $ofile]) -_LT_OUTPUT_LIBTOOL_COMMANDS -AS_EXIT(0) -_LTEOF -chmod +x "$CONFIG_LT" - -# configure is writing to config.log, but config.lt does its own redirection, -# appending to config.log, which fails on DOS, as config.log is still kept -# open by configure. Here we exec the FD to /dev/null, effectively closing -# config.log, so it can be properly (re)opened and appended to by config.lt. -lt_cl_success=: -test "$silent" = yes && - lt_config_lt_args="$lt_config_lt_args --quiet" -exec AS_MESSAGE_LOG_FD>/dev/null -$SHELL "$CONFIG_LT" $lt_config_lt_args || lt_cl_success=false -exec AS_MESSAGE_LOG_FD>>config.log -$lt_cl_success || AS_EXIT(1) -]) -m4trace:/usr/share/aclocal/libtool.m4:788: -1- AC_DEFUN([LT_SUPPORTED_TAG], []) -m4trace:/usr/share/aclocal/libtool.m4:799: -1- AC_DEFUN([LT_LANG], [AC_BEFORE([$0], [LT_OUTPUT])dnl -m4_case([$1], - [C], [_LT_LANG(C)], - [C++], [_LT_LANG(CXX)], - [Java], [_LT_LANG(GCJ)], - [Fortran 77], [_LT_LANG(F77)], - [Fortran], [_LT_LANG(FC)], - [Windows Resource], [_LT_LANG(RC)], - [m4_ifdef([_LT_LANG_]$1[_CONFIG], - [_LT_LANG($1)], - [m4_fatal([$0: unsupported language: "$1"])])])dnl -]) -m4trace:/usr/share/aclocal/libtool.m4:861: -1- AU_DEFUN([AC_LIBTOOL_CXX], [LT_LANG(C++)]) -m4trace:/usr/share/aclocal/libtool.m4:861: -1- AC_DEFUN([AC_LIBTOOL_CXX], [AC_DIAGNOSE([obsolete], [The macro `AC_LIBTOOL_CXX' is obsolete. -You should run autoupdate.])dnl -LT_LANG(C++)]) -m4trace:/usr/share/aclocal/libtool.m4:862: -1- AU_DEFUN([AC_LIBTOOL_F77], [LT_LANG(Fortran 77)]) -m4trace:/usr/share/aclocal/libtool.m4:862: -1- AC_DEFUN([AC_LIBTOOL_F77], [AC_DIAGNOSE([obsolete], [The macro `AC_LIBTOOL_F77' is obsolete. -You should run autoupdate.])dnl -LT_LANG(Fortran 77)]) -m4trace:/usr/share/aclocal/libtool.m4:863: -1- AU_DEFUN([AC_LIBTOOL_FC], [LT_LANG(Fortran)]) -m4trace:/usr/share/aclocal/libtool.m4:863: -1- AC_DEFUN([AC_LIBTOOL_FC], [AC_DIAGNOSE([obsolete], [The macro `AC_LIBTOOL_FC' is obsolete. -You should run autoupdate.])dnl -LT_LANG(Fortran)]) -m4trace:/usr/share/aclocal/libtool.m4:864: -1- AU_DEFUN([AC_LIBTOOL_GCJ], [LT_LANG(Java)]) -m4trace:/usr/share/aclocal/libtool.m4:864: -1- AC_DEFUN([AC_LIBTOOL_GCJ], [AC_DIAGNOSE([obsolete], [The macro `AC_LIBTOOL_GCJ' is obsolete. -You should run autoupdate.])dnl -LT_LANG(Java)]) -m4trace:/usr/share/aclocal/libtool.m4:865: -1- AU_DEFUN([AC_LIBTOOL_RC], [LT_LANG(Windows Resource)]) -m4trace:/usr/share/aclocal/libtool.m4:865: -1- AC_DEFUN([AC_LIBTOOL_RC], [AC_DIAGNOSE([obsolete], [The macro `AC_LIBTOOL_RC' is obsolete. -You should run autoupdate.])dnl -LT_LANG(Windows Resource)]) -m4trace:/usr/share/aclocal/libtool.m4:1181: -1- AC_DEFUN([_LT_WITH_SYSROOT], [AC_MSG_CHECKING([for sysroot]) -AC_ARG_WITH([sysroot], -[ --with-sysroot[=DIR] Search for dependent libraries within DIR - (or the compiler's sysroot if not specified).], -[], [with_sysroot=no]) - -dnl lt_sysroot will always be passed unquoted. We quote it here -dnl in case the user passed a directory name. -lt_sysroot= -case ${with_sysroot} in #( - yes) - if test "$GCC" = yes; then - lt_sysroot=`$CC --print-sysroot 2>/dev/null` - fi - ;; #( - /*) - lt_sysroot=`echo "$with_sysroot" | sed -e "$sed_quote_subst"` - ;; #( - no|'') - ;; #( - *) - AC_MSG_RESULT([${with_sysroot}]) - AC_MSG_ERROR([The sysroot must be an absolute path.]) - ;; -esac - - AC_MSG_RESULT([${lt_sysroot:-no}]) -_LT_DECL([], [lt_sysroot], [0], [The root where to search for ]dnl -[dependent libraries, and in which our libraries should be installed.])]) -m4trace:/usr/share/aclocal/libtool.m4:1445: -1- AC_DEFUN([_LT_COMPILER_OPTION], [m4_require([_LT_FILEUTILS_DEFAULTS])dnl -m4_require([_LT_DECL_SED])dnl -AC_CACHE_CHECK([$1], [$2], - [$2=no - m4_if([$4], , [ac_outfile=conftest.$ac_objext], [ac_outfile=$4]) - echo "$lt_simple_compile_test_code" > conftest.$ac_ext - lt_compiler_flag="$3" - # Insert the option either (1) after the last *FLAGS variable, or - # (2) before a word containing "conftest.", or (3) at the end. - # Note that $ac_compile itself does not contain backslashes and begins - # with a dollar sign (not a hyphen), so the echo should work correctly. - # The option is referenced via a variable to avoid confusing sed. - lt_compile=`echo "$ac_compile" | $SED \ - -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ - -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \ - -e 's:$: $lt_compiler_flag:'` - (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&AS_MESSAGE_LOG_FD) - (eval "$lt_compile" 2>conftest.err) - ac_status=$? - cat conftest.err >&AS_MESSAGE_LOG_FD - echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD - if (exit $ac_status) && test -s "$ac_outfile"; then - # The compiler can only warn and ignore the option if not recognized - # So say no if there are warnings other than the usual output. - $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp - $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 - if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then - $2=yes - fi - fi - $RM conftest* -]) - -if test x"[$]$2" = xyes; then - m4_if([$5], , :, [$5]) -else - m4_if([$6], , :, [$6]) -fi -]) -m4trace:/usr/share/aclocal/libtool.m4:1487: -1- AU_DEFUN([AC_LIBTOOL_COMPILER_OPTION], [m4_if($#, 0, [_LT_COMPILER_OPTION], [_LT_COMPILER_OPTION($@)])]) -m4trace:/usr/share/aclocal/libtool.m4:1487: -1- AC_DEFUN([AC_LIBTOOL_COMPILER_OPTION], [AC_DIAGNOSE([obsolete], [The macro `AC_LIBTOOL_COMPILER_OPTION' is obsolete. -You should run autoupdate.])dnl -m4_if($#, 0, [_LT_COMPILER_OPTION], [_LT_COMPILER_OPTION($@)])]) -m4trace:/usr/share/aclocal/libtool.m4:1496: -1- AC_DEFUN([_LT_LINKER_OPTION], [m4_require([_LT_FILEUTILS_DEFAULTS])dnl -m4_require([_LT_DECL_SED])dnl -AC_CACHE_CHECK([$1], [$2], - [$2=no - save_LDFLAGS="$LDFLAGS" - LDFLAGS="$LDFLAGS $3" - echo "$lt_simple_link_test_code" > conftest.$ac_ext - if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then - # The linker can only warn and ignore the option if not recognized - # So say no if there are warnings - if test -s conftest.err; then - # Append any errors to the config.log. - cat conftest.err 1>&AS_MESSAGE_LOG_FD - $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp - $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 - if diff conftest.exp conftest.er2 >/dev/null; then - $2=yes - fi - else - $2=yes - fi - fi - $RM -r conftest* - LDFLAGS="$save_LDFLAGS" -]) - -if test x"[$]$2" = xyes; then - m4_if([$4], , :, [$4]) -else - m4_if([$5], , :, [$5]) -fi -]) -m4trace:/usr/share/aclocal/libtool.m4:1531: -1- AU_DEFUN([AC_LIBTOOL_LINKER_OPTION], [m4_if($#, 0, [_LT_LINKER_OPTION], [_LT_LINKER_OPTION($@)])]) -m4trace:/usr/share/aclocal/libtool.m4:1531: -1- AC_DEFUN([AC_LIBTOOL_LINKER_OPTION], [AC_DIAGNOSE([obsolete], [The macro `AC_LIBTOOL_LINKER_OPTION' is obsolete. -You should run autoupdate.])dnl -m4_if($#, 0, [_LT_LINKER_OPTION], [_LT_LINKER_OPTION($@)])]) -m4trace:/usr/share/aclocal/libtool.m4:1538: -1- AC_DEFUN([LT_CMD_MAX_LEN], [AC_REQUIRE([AC_CANONICAL_HOST])dnl -# find the maximum length of command line arguments -AC_MSG_CHECKING([the maximum length of command line arguments]) -AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl - i=0 - teststring="ABCD" - - case $build_os in - msdosdjgpp*) - # On DJGPP, this test can blow up pretty badly due to problems in libc - # (any single argument exceeding 2000 bytes causes a buffer overrun - # during glob expansion). Even if it were fixed, the result of this - # check would be larger than it should be. - lt_cv_sys_max_cmd_len=12288; # 12K is about right - ;; - - gnu*) - # Under GNU Hurd, this test is not required because there is - # no limit to the length of command line arguments. - # Libtool will interpret -1 as no limit whatsoever - lt_cv_sys_max_cmd_len=-1; - ;; - - cygwin* | mingw* | cegcc*) - # On Win9x/ME, this test blows up -- it succeeds, but takes - # about 5 minutes as the teststring grows exponentially. - # Worse, since 9x/ME are not pre-emptively multitasking, - # you end up with a "frozen" computer, even though with patience - # the test eventually succeeds (with a max line length of 256k). - # Instead, let's just punt: use the minimum linelength reported by - # all of the supported platforms: 8192 (on NT/2K/XP). - lt_cv_sys_max_cmd_len=8192; - ;; - - mint*) - # On MiNT this can take a long time and run out of memory. - lt_cv_sys_max_cmd_len=8192; - ;; - - amigaos*) - # On AmigaOS with pdksh, this test takes hours, literally. - # So we just punt and use a minimum line length of 8192. - lt_cv_sys_max_cmd_len=8192; - ;; - - netbsd* | freebsd* | openbsd* | darwin* | dragonfly*) - # This has been around since 386BSD, at least. Likely further. - if test -x /sbin/sysctl; then - lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax` - elif test -x /usr/sbin/sysctl; then - lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax` - else - lt_cv_sys_max_cmd_len=65536 # usable default for all BSDs - fi - # And add a safety zone - lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` - lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` - ;; - - interix*) - # We know the value 262144 and hardcode it with a safety zone (like BSD) - lt_cv_sys_max_cmd_len=196608 - ;; - - osf*) - # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure - # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not - # nice to cause kernel panics so lets avoid the loop below. - # First set a reasonable default. - lt_cv_sys_max_cmd_len=16384 - # - if test -x /sbin/sysconfig; then - case `/sbin/sysconfig -q proc exec_disable_arg_limit` in - *1*) lt_cv_sys_max_cmd_len=-1 ;; - esac - fi - ;; - sco3.2v5*) - lt_cv_sys_max_cmd_len=102400 - ;; - sysv5* | sco5v6* | sysv4.2uw2*) - kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null` - if test -n "$kargmax"; then - lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[[ ]]//'` - else - lt_cv_sys_max_cmd_len=32768 - fi - ;; - *) - lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null` - if test -n "$lt_cv_sys_max_cmd_len"; then - lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` - lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` - else - # Make teststring a little bigger before we do anything with it. - # a 1K string should be a reasonable start. - for i in 1 2 3 4 5 6 7 8 ; do - teststring=$teststring$teststring - done - SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}} - # If test is not a shell built-in, we'll probably end up computing a - # maximum length that is only half of the actual maximum length, but - # we can't tell. - while { test "X"`func_fallback_echo "$teststring$teststring" 2>/dev/null` \ - = "X$teststring$teststring"; } >/dev/null 2>&1 && - test $i != 17 # 1/2 MB should be enough - do - i=`expr $i + 1` - teststring=$teststring$teststring - done - # Only check the string length outside the loop. - lt_cv_sys_max_cmd_len=`expr "X$teststring" : ".*" 2>&1` - teststring= - # Add a significant safety factor because C++ compilers can tack on - # massive amounts of additional arguments before passing them to the - # linker. It appears as though 1/2 is a usable value. - lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2` - fi - ;; - esac -]) -if test -n $lt_cv_sys_max_cmd_len ; then - AC_MSG_RESULT($lt_cv_sys_max_cmd_len) -else - AC_MSG_RESULT(none) -fi -max_cmd_len=$lt_cv_sys_max_cmd_len -_LT_DECL([], [max_cmd_len], [0], - [What is the maximum length of a command?]) -]) -m4trace:/usr/share/aclocal/libtool.m4:1671: -1- AU_DEFUN([AC_LIBTOOL_SYS_MAX_CMD_LEN], [m4_if($#, 0, [LT_CMD_MAX_LEN], [LT_CMD_MAX_LEN($@)])]) -m4trace:/usr/share/aclocal/libtool.m4:1671: -1- AC_DEFUN([AC_LIBTOOL_SYS_MAX_CMD_LEN], [AC_DIAGNOSE([obsolete], [The macro `AC_LIBTOOL_SYS_MAX_CMD_LEN' is obsolete. -You should run autoupdate.])dnl -m4_if($#, 0, [LT_CMD_MAX_LEN], [LT_CMD_MAX_LEN($@)])]) -m4trace:/usr/share/aclocal/libtool.m4:1782: -1- AC_DEFUN([LT_SYS_DLOPEN_SELF], [m4_require([_LT_HEADER_DLFCN])dnl -if test "x$enable_dlopen" != xyes; then - enable_dlopen=unknown - enable_dlopen_self=unknown - enable_dlopen_self_static=unknown -else - lt_cv_dlopen=no - lt_cv_dlopen_libs= - - case $host_os in - beos*) - lt_cv_dlopen="load_add_on" - lt_cv_dlopen_libs= - lt_cv_dlopen_self=yes - ;; - - mingw* | pw32* | cegcc*) - lt_cv_dlopen="LoadLibrary" - lt_cv_dlopen_libs= - ;; - - cygwin*) - lt_cv_dlopen="dlopen" - lt_cv_dlopen_libs= - ;; - - darwin*) - # if libdl is installed we need to link against it - AC_CHECK_LIB([dl], [dlopen], - [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],[ - lt_cv_dlopen="dyld" - lt_cv_dlopen_libs= - lt_cv_dlopen_self=yes - ]) - ;; - - *) - AC_CHECK_FUNC([shl_load], - [lt_cv_dlopen="shl_load"], - [AC_CHECK_LIB([dld], [shl_load], - [lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld"], - [AC_CHECK_FUNC([dlopen], - [lt_cv_dlopen="dlopen"], - [AC_CHECK_LIB([dl], [dlopen], - [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"], - [AC_CHECK_LIB([svld], [dlopen], - [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"], - [AC_CHECK_LIB([dld], [dld_link], - [lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld"]) - ]) - ]) - ]) - ]) - ]) - ;; - esac - - if test "x$lt_cv_dlopen" != xno; then - enable_dlopen=yes - else - enable_dlopen=no - fi - - case $lt_cv_dlopen in - dlopen) - save_CPPFLAGS="$CPPFLAGS" - test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H" - - save_LDFLAGS="$LDFLAGS" - wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\" - - save_LIBS="$LIBS" - LIBS="$lt_cv_dlopen_libs $LIBS" - - AC_CACHE_CHECK([whether a program can dlopen itself], - lt_cv_dlopen_self, [dnl - _LT_TRY_DLOPEN_SELF( - lt_cv_dlopen_self=yes, lt_cv_dlopen_self=yes, - lt_cv_dlopen_self=no, lt_cv_dlopen_self=cross) - ]) - - if test "x$lt_cv_dlopen_self" = xyes; then - wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\" - AC_CACHE_CHECK([whether a statically linked program can dlopen itself], - lt_cv_dlopen_self_static, [dnl - _LT_TRY_DLOPEN_SELF( - lt_cv_dlopen_self_static=yes, lt_cv_dlopen_self_static=yes, - lt_cv_dlopen_self_static=no, lt_cv_dlopen_self_static=cross) - ]) - fi - - CPPFLAGS="$save_CPPFLAGS" - LDFLAGS="$save_LDFLAGS" - LIBS="$save_LIBS" - ;; - esac - - case $lt_cv_dlopen_self in - yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;; - *) enable_dlopen_self=unknown ;; - esac - - case $lt_cv_dlopen_self_static in - yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;; - *) enable_dlopen_self_static=unknown ;; - esac -fi -_LT_DECL([dlopen_support], [enable_dlopen], [0], - [Whether dlopen is supported]) -_LT_DECL([dlopen_self], [enable_dlopen_self], [0], - [Whether dlopen of programs is supported]) -_LT_DECL([dlopen_self_static], [enable_dlopen_self_static], [0], - [Whether dlopen of statically linked programs is supported]) -]) -m4trace:/usr/share/aclocal/libtool.m4:1899: -1- AU_DEFUN([AC_LIBTOOL_DLOPEN_SELF], [m4_if($#, 0, [LT_SYS_DLOPEN_SELF], [LT_SYS_DLOPEN_SELF($@)])]) -m4trace:/usr/share/aclocal/libtool.m4:1899: -1- AC_DEFUN([AC_LIBTOOL_DLOPEN_SELF], [AC_DIAGNOSE([obsolete], [The macro `AC_LIBTOOL_DLOPEN_SELF' is obsolete. -You should run autoupdate.])dnl -m4_if($#, 0, [LT_SYS_DLOPEN_SELF], [LT_SYS_DLOPEN_SELF($@)])]) -m4trace:/usr/share/aclocal/libtool.m4:2884: -1- AC_DEFUN([_LT_PATH_TOOL_PREFIX], [m4_require([_LT_DECL_EGREP])dnl -AC_MSG_CHECKING([for $1]) -AC_CACHE_VAL(lt_cv_path_MAGIC_CMD, -[case $MAGIC_CMD in -[[\\/*] | ?:[\\/]*]) - lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. - ;; -*) - lt_save_MAGIC_CMD="$MAGIC_CMD" - lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR -dnl $ac_dummy forces splitting on constant user-supplied paths. -dnl POSIX.2 word splitting is done only on the output of word expansions, -dnl not every word. This closes a longstanding sh security hole. - ac_dummy="m4_if([$2], , $PATH, [$2])" - for ac_dir in $ac_dummy; do - IFS="$lt_save_ifs" - test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/$1; then - lt_cv_path_MAGIC_CMD="$ac_dir/$1" - if test -n "$file_magic_test_file"; then - case $deplibs_check_method in - "file_magic "*) - file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"` - MAGIC_CMD="$lt_cv_path_MAGIC_CMD" - if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | - $EGREP "$file_magic_regex" > /dev/null; then - : - else - cat <<_LT_EOF 1>&2 - -*** Warning: the command libtool uses to detect shared libraries, -*** $file_magic_cmd, produces output that libtool cannot recognize. -*** The result is that libtool may fail to recognize shared libraries -*** as such. This will affect the creation of libtool libraries that -*** depend on shared libraries, but programs linked with such libtool -*** libraries will work regardless of this problem. Nevertheless, you -*** may want to report the problem to your system manager and/or to -*** bug-libtool@gnu.org - -_LT_EOF - fi ;; - esac - fi - break - fi - done - IFS="$lt_save_ifs" - MAGIC_CMD="$lt_save_MAGIC_CMD" - ;; -esac]) -MAGIC_CMD="$lt_cv_path_MAGIC_CMD" -if test -n "$MAGIC_CMD"; then - AC_MSG_RESULT($MAGIC_CMD) -else - AC_MSG_RESULT(no) -fi -_LT_DECL([], [MAGIC_CMD], [0], - [Used to examine libraries when file_magic_cmd begins with "file"])dnl -]) -m4trace:/usr/share/aclocal/libtool.m4:2946: -1- AU_DEFUN([AC_PATH_TOOL_PREFIX], [m4_if($#, 0, [_LT_PATH_TOOL_PREFIX], [_LT_PATH_TOOL_PREFIX($@)])]) -m4trace:/usr/share/aclocal/libtool.m4:2946: -1- AC_DEFUN([AC_PATH_TOOL_PREFIX], [AC_DIAGNOSE([obsolete], [The macro `AC_PATH_TOOL_PREFIX' is obsolete. -You should run autoupdate.])dnl -m4_if($#, 0, [_LT_PATH_TOOL_PREFIX], [_LT_PATH_TOOL_PREFIX($@)])]) -m4trace:/usr/share/aclocal/libtool.m4:2969: -1- AC_DEFUN([LT_PATH_LD], [AC_REQUIRE([AC_PROG_CC])dnl -AC_REQUIRE([AC_CANONICAL_HOST])dnl -AC_REQUIRE([AC_CANONICAL_BUILD])dnl -m4_require([_LT_DECL_SED])dnl -m4_require([_LT_DECL_EGREP])dnl -m4_require([_LT_PROG_ECHO_BACKSLASH])dnl - -AC_ARG_WITH([gnu-ld], - [AS_HELP_STRING([--with-gnu-ld], - [assume the C compiler uses GNU ld @<:@default=no@:>@])], - [test "$withval" = no || with_gnu_ld=yes], - [with_gnu_ld=no])dnl - -ac_prog=ld -if test "$GCC" = yes; then - # Check if gcc -print-prog-name=ld gives a path. - AC_MSG_CHECKING([for ld used by $CC]) - case $host in - *-*-mingw*) - # gcc leaves a trailing carriage return which upsets mingw - ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; - *) - ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; - esac - case $ac_prog in - # Accept absolute paths. - [[\\/]]* | ?:[[\\/]]*) - re_direlt='/[[^/]][[^/]]*/\.\./' - # Canonicalize the pathname of ld - ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'` - while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do - ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"` - done - test -z "$LD" && LD="$ac_prog" - ;; - "") - # If it fails, then pretend we aren't using GCC. - ac_prog=ld - ;; - *) - # If it is relative, then search for the first ld in PATH. - with_gnu_ld=unknown - ;; - esac -elif test "$with_gnu_ld" = yes; then - AC_MSG_CHECKING([for GNU ld]) -else - AC_MSG_CHECKING([for non-GNU ld]) -fi -AC_CACHE_VAL(lt_cv_path_LD, -[if test -z "$LD"; then - lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR - for ac_dir in $PATH; do - IFS="$lt_save_ifs" - test -z "$ac_dir" && ac_dir=. - if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then - lt_cv_path_LD="$ac_dir/$ac_prog" - # Check to see if the program is GNU ld. I'd rather use --version, - # but apparently some variants of GNU ld only accept -v. - # Break only if it was the GNU/non-GNU ld that we prefer. - case `"$lt_cv_path_LD" -v 2>&1 &1 | sed '1q'` in - */dev/null* | *'Invalid file or object type'*) - lt_cv_path_NM="$tmp_nm -B" - break - ;; - *) - case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in - */dev/null*) - lt_cv_path_NM="$tmp_nm -p" - break - ;; - *) - lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but - continue # so that we can try to find one that supports BSD flags - ;; - esac - ;; - esac - fi - done - IFS="$lt_save_ifs" - done - : ${lt_cv_path_NM=no} -fi]) -if test "$lt_cv_path_NM" != "no"; then - NM="$lt_cv_path_NM" -else - # Didn't find any BSD compatible name lister, look for dumpbin. - if test -n "$DUMPBIN"; then : - # Let the user override the test. - else - AC_CHECK_TOOLS(DUMPBIN, [dumpbin "link -dump"], :) - case `$DUMPBIN -symbols /dev/null 2>&1 | sed '1q'` in - *COFF*) - DUMPBIN="$DUMPBIN -symbols" - ;; - *) - DUMPBIN=: - ;; - esac - fi - AC_SUBST([DUMPBIN]) - if test "$DUMPBIN" != ":"; then - NM="$DUMPBIN" - fi -fi -test -z "$NM" && NM=nm -AC_SUBST([NM]) -_LT_DECL([], [NM], [1], [A BSD- or MS-compatible name lister])dnl - -AC_CACHE_CHECK([the name lister ($NM) interface], [lt_cv_nm_interface], - [lt_cv_nm_interface="BSD nm" - echo "int some_variable = 0;" > conftest.$ac_ext - (eval echo "\"\$as_me:$LINENO: $ac_compile\"" >&AS_MESSAGE_LOG_FD) - (eval "$ac_compile" 2>conftest.err) - cat conftest.err >&AS_MESSAGE_LOG_FD - (eval echo "\"\$as_me:$LINENO: $NM \\\"conftest.$ac_objext\\\"\"" >&AS_MESSAGE_LOG_FD) - (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out) - cat conftest.err >&AS_MESSAGE_LOG_FD - (eval echo "\"\$as_me:$LINENO: output\"" >&AS_MESSAGE_LOG_FD) - cat conftest.out >&AS_MESSAGE_LOG_FD - if $GREP 'External.*some_variable' conftest.out > /dev/null; then - lt_cv_nm_interface="MS dumpbin" - fi - rm -f conftest*]) -]) -m4trace:/usr/share/aclocal/libtool.m4:3443: -1- AU_DEFUN([AM_PROG_NM], [m4_if($#, 0, [LT_PATH_NM], [LT_PATH_NM($@)])]) -m4trace:/usr/share/aclocal/libtool.m4:3443: -1- AC_DEFUN([AM_PROG_NM], [AC_DIAGNOSE([obsolete], [The macro `AM_PROG_NM' is obsolete. -You should run autoupdate.])dnl -m4_if($#, 0, [LT_PATH_NM], [LT_PATH_NM($@)])]) -m4trace:/usr/share/aclocal/libtool.m4:3444: -1- AU_DEFUN([AC_PROG_NM], [m4_if($#, 0, [LT_PATH_NM], [LT_PATH_NM($@)])]) -m4trace:/usr/share/aclocal/libtool.m4:3444: -1- AC_DEFUN([AC_PROG_NM], [AC_DIAGNOSE([obsolete], [The macro `AC_PROG_NM' is obsolete. -You should run autoupdate.])dnl -m4_if($#, 0, [LT_PATH_NM], [LT_PATH_NM($@)])]) -m4trace:/usr/share/aclocal/libtool.m4:3514: -1- AC_DEFUN([LT_LIB_M], [AC_REQUIRE([AC_CANONICAL_HOST])dnl -LIBM= -case $host in -*-*-beos* | *-*-cegcc* | *-*-cygwin* | *-*-haiku* | *-*-pw32* | *-*-darwin*) - # These system don't have libm, or don't need it - ;; -*-ncr-sysv4.3*) - AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw") - AC_CHECK_LIB(m, cos, LIBM="$LIBM -lm") - ;; -*) - AC_CHECK_LIB(m, cos, LIBM="-lm") - ;; -esac -AC_SUBST([LIBM]) -]) -m4trace:/usr/share/aclocal/libtool.m4:3533: -1- AU_DEFUN([AC_CHECK_LIBM], [m4_if($#, 0, [LT_LIB_M], [LT_LIB_M($@)])]) -m4trace:/usr/share/aclocal/libtool.m4:3533: -1- AC_DEFUN([AC_CHECK_LIBM], [AC_DIAGNOSE([obsolete], [The macro `AC_CHECK_LIBM' is obsolete. -You should run autoupdate.])dnl -m4_if($#, 0, [LT_LIB_M], [LT_LIB_M($@)])]) -m4trace:/usr/share/aclocal/libtool.m4:7498: -1- AC_DEFUN([LT_PROG_GCJ], [m4_ifdef([AC_PROG_GCJ], [AC_PROG_GCJ], - [m4_ifdef([A][M_PROG_GCJ], [A][M_PROG_GCJ], - [AC_CHECK_TOOL(GCJ, gcj,) - test "x${GCJFLAGS+set}" = xset || GCJFLAGS="-g -O2" - AC_SUBST(GCJFLAGS)])])[]dnl -]) -m4trace:/usr/share/aclocal/libtool.m4:7507: -1- AU_DEFUN([LT_AC_PROG_GCJ], [m4_if($#, 0, [LT_PROG_GCJ], [LT_PROG_GCJ($@)])]) -m4trace:/usr/share/aclocal/libtool.m4:7507: -1- AC_DEFUN([LT_AC_PROG_GCJ], [AC_DIAGNOSE([obsolete], [The macro `LT_AC_PROG_GCJ' is obsolete. -You should run autoupdate.])dnl -m4_if($#, 0, [LT_PROG_GCJ], [LT_PROG_GCJ($@)])]) -m4trace:/usr/share/aclocal/libtool.m4:7514: -1- AC_DEFUN([LT_PROG_RC], [AC_CHECK_TOOL(RC, windres,) -]) -m4trace:/usr/share/aclocal/libtool.m4:7519: -1- AU_DEFUN([LT_AC_PROG_RC], [m4_if($#, 0, [LT_PROG_RC], [LT_PROG_RC($@)])]) -m4trace:/usr/share/aclocal/libtool.m4:7519: -1- AC_DEFUN([LT_AC_PROG_RC], [AC_DIAGNOSE([obsolete], [The macro `LT_AC_PROG_RC' is obsolete. -You should run autoupdate.])dnl -m4_if($#, 0, [LT_PROG_RC], [LT_PROG_RC($@)])]) -m4trace:/usr/share/aclocal/libtool.m4:7639: -1- AU_DEFUN([LT_AC_PROG_SED], [m4_if($#, 0, [AC_PROG_SED], [AC_PROG_SED($@)])]) -m4trace:/usr/share/aclocal/libtool.m4:7639: -1- AC_DEFUN([LT_AC_PROG_SED], [AC_DIAGNOSE([obsolete], [The macro `LT_AC_PROG_SED' is obsolete. -You should run autoupdate.])dnl -m4_if($#, 0, [AC_PROG_SED], [AC_PROG_SED($@)])]) -m4trace:/usr/share/aclocal/ltdl.m4:16: -1- AC_DEFUN([LT_CONFIG_LTDL_DIR], [AC_BEFORE([$0], [LTDL_INIT]) -_$0($*) -]) -m4trace:/usr/share/aclocal/ltdl.m4:68: -1- AC_DEFUN([LTDL_CONVENIENCE], [AC_BEFORE([$0], [LTDL_INIT])dnl -dnl Although the argument is deprecated and no longer documented, -dnl LTDL_CONVENIENCE used to take a DIRECTORY orgument, if we have one -dnl here make sure it is the same as any other declaration of libltdl's -dnl location! This also ensures lt_ltdl_dir is set when configure.ac is -dnl not yet using an explicit LT_CONFIG_LTDL_DIR. -m4_ifval([$1], [_LT_CONFIG_LTDL_DIR([$1])])dnl -_$0() -]) -m4trace:/usr/share/aclocal/ltdl.m4:81: -1- AU_DEFUN([AC_LIBLTDL_CONVENIENCE], [_LT_CONFIG_LTDL_DIR([m4_default([$1], [libltdl])]) -_LTDL_CONVENIENCE]) -m4trace:/usr/share/aclocal/ltdl.m4:81: -1- AC_DEFUN([AC_LIBLTDL_CONVENIENCE], [AC_DIAGNOSE([obsolete], [The macro `AC_LIBLTDL_CONVENIENCE' is obsolete. -You should run autoupdate.])dnl -_LT_CONFIG_LTDL_DIR([m4_default([$1], [libltdl])]) -_LTDL_CONVENIENCE]) -m4trace:/usr/share/aclocal/ltdl.m4:124: -1- AC_DEFUN([LTDL_INSTALLABLE], [AC_BEFORE([$0], [LTDL_INIT])dnl -dnl Although the argument is deprecated and no longer documented, -dnl LTDL_INSTALLABLE used to take a DIRECTORY orgument, if we have one -dnl here make sure it is the same as any other declaration of libltdl's -dnl location! This also ensures lt_ltdl_dir is set when configure.ac is -dnl not yet using an explicit LT_CONFIG_LTDL_DIR. -m4_ifval([$1], [_LT_CONFIG_LTDL_DIR([$1])])dnl -_$0() -]) -m4trace:/usr/share/aclocal/ltdl.m4:137: -1- AU_DEFUN([AC_LIBLTDL_INSTALLABLE], [_LT_CONFIG_LTDL_DIR([m4_default([$1], [libltdl])]) -_LTDL_INSTALLABLE]) -m4trace:/usr/share/aclocal/ltdl.m4:137: -1- AC_DEFUN([AC_LIBLTDL_INSTALLABLE], [AC_DIAGNOSE([obsolete], [The macro `AC_LIBLTDL_INSTALLABLE' is obsolete. -You should run autoupdate.])dnl -_LT_CONFIG_LTDL_DIR([m4_default([$1], [libltdl])]) -_LTDL_INSTALLABLE]) -m4trace:/usr/share/aclocal/ltdl.m4:213: -1- AC_DEFUN([_LT_LIBOBJ], [ - m4_pattern_allow([^_LT_LIBOBJS$]) - _LT_LIBOBJS="$_LT_LIBOBJS $1.$ac_objext" -]) -m4trace:/usr/share/aclocal/ltdl.m4:226: -1- AC_DEFUN([LTDL_INIT], [dnl Parse OPTIONS -_LT_SET_OPTIONS([$0], [$1]) - -dnl We need to keep our own list of libobjs separate from our parent project, -dnl and the easiest way to do that is redefine the AC_LIBOBJs macro while -dnl we look for our own LIBOBJs. -m4_pushdef([AC_LIBOBJ], m4_defn([_LT_LIBOBJ])) -m4_pushdef([AC_LIBSOURCES]) - -dnl If not otherwise defined, default to the 1.5.x compatible subproject mode: -m4_if(_LTDL_MODE, [], - [m4_define([_LTDL_MODE], m4_default([$2], [subproject])) - m4_if([-1], [m4_bregexp(_LTDL_MODE, [\(subproject\|\(non\)?recursive\)])], - [m4_fatal([unknown libltdl mode: ]_LTDL_MODE)])]) - -AC_ARG_WITH([included_ltdl], - [AS_HELP_STRING([--with-included-ltdl], - [use the GNU ltdl sources included here])]) - -if test "x$with_included_ltdl" != xyes; then - # We are not being forced to use the included libltdl sources, so - # decide whether there is a useful installed version we can use. - AC_CHECK_HEADER([ltdl.h], - [AC_CHECK_DECL([lt_dlinterface_register], - [AC_CHECK_LIB([ltdl], [lt_dladvise_preload], - [with_included_ltdl=no], - [with_included_ltdl=yes])], - [with_included_ltdl=yes], - [AC_INCLUDES_DEFAULT - #include ])], - [with_included_ltdl=yes], - [AC_INCLUDES_DEFAULT] - ) -fi - -dnl If neither LT_CONFIG_LTDL_DIR, LTDL_CONVENIENCE nor LTDL_INSTALLABLE -dnl was called yet, then for old times' sake, we assume libltdl is in an -dnl eponymous directory: -AC_PROVIDE_IFELSE([LT_CONFIG_LTDL_DIR], [], [_LT_CONFIG_LTDL_DIR([libltdl])]) - -AC_ARG_WITH([ltdl_include], - [AS_HELP_STRING([--with-ltdl-include=DIR], - [use the ltdl headers installed in DIR])]) - -if test -n "$with_ltdl_include"; then - if test -f "$with_ltdl_include/ltdl.h"; then : - else - AC_MSG_ERROR([invalid ltdl include directory: `$with_ltdl_include']) - fi -else - with_ltdl_include=no -fi - -AC_ARG_WITH([ltdl_lib], - [AS_HELP_STRING([--with-ltdl-lib=DIR], - [use the libltdl.la installed in DIR])]) - -if test -n "$with_ltdl_lib"; then - if test -f "$with_ltdl_lib/libltdl.la"; then : - else - AC_MSG_ERROR([invalid ltdl library directory: `$with_ltdl_lib']) - fi -else - with_ltdl_lib=no -fi - -case ,$with_included_ltdl,$with_ltdl_include,$with_ltdl_lib, in - ,yes,no,no,) - m4_case(m4_default(_LTDL_TYPE, [convenience]), - [convenience], [_LTDL_CONVENIENCE], - [installable], [_LTDL_INSTALLABLE], - [m4_fatal([unknown libltdl build type: ]_LTDL_TYPE)]) - ;; - ,no,no,no,) - # If the included ltdl is not to be used, then use the - # preinstalled libltdl we found. - AC_DEFINE([HAVE_LTDL], [1], - [Define this if a modern libltdl is already installed]) - LIBLTDL=-lltdl - LTDLDEPS= - LTDLINCL= - ;; - ,no*,no,*) - AC_MSG_ERROR([`--with-ltdl-include' and `--with-ltdl-lib' options must be used together]) - ;; - *) with_included_ltdl=no - LIBLTDL="-L$with_ltdl_lib -lltdl" - LTDLDEPS= - LTDLINCL="-I$with_ltdl_include" - ;; -esac -INCLTDL="$LTDLINCL" - -# Report our decision... -AC_MSG_CHECKING([where to find libltdl headers]) -AC_MSG_RESULT([$LTDLINCL]) -AC_MSG_CHECKING([where to find libltdl library]) -AC_MSG_RESULT([$LIBLTDL]) - -_LTDL_SETUP - -dnl restore autoconf definition. -m4_popdef([AC_LIBOBJ]) -m4_popdef([AC_LIBSOURCES]) - -AC_CONFIG_COMMANDS_PRE([ - _ltdl_libobjs= - _ltdl_ltlibobjs= - if test -n "$_LT_LIBOBJS"; then - # Remove the extension. - _lt_sed_drop_objext='s/\.o$//;s/\.obj$//' - for i in `for i in $_LT_LIBOBJS; do echo "$i"; done | sed "$_lt_sed_drop_objext" | sort -u`; do - _ltdl_libobjs="$_ltdl_libobjs $lt_libobj_prefix$i.$ac_objext" - _ltdl_ltlibobjs="$_ltdl_ltlibobjs $lt_libobj_prefix$i.lo" - done - fi - AC_SUBST([ltdl_LIBOBJS], [$_ltdl_libobjs]) - AC_SUBST([ltdl_LTLIBOBJS], [$_ltdl_ltlibobjs]) -]) - -# Only expand once: -m4_define([LTDL_INIT]) -]) -m4trace:/usr/share/aclocal/ltdl.m4:352: -1- AU_DEFUN([AC_LIB_LTDL], [LTDL_INIT($@)]) -m4trace:/usr/share/aclocal/ltdl.m4:352: -1- AC_DEFUN([AC_LIB_LTDL], [AC_DIAGNOSE([obsolete], [The macro `AC_LIB_LTDL' is obsolete. -You should run autoupdate.])dnl -LTDL_INIT($@)]) -m4trace:/usr/share/aclocal/ltdl.m4:353: -1- AU_DEFUN([AC_WITH_LTDL], [LTDL_INIT($@)]) -m4trace:/usr/share/aclocal/ltdl.m4:353: -1- AC_DEFUN([AC_WITH_LTDL], [AC_DIAGNOSE([obsolete], [The macro `AC_WITH_LTDL' is obsolete. -You should run autoupdate.])dnl -LTDL_INIT($@)]) -m4trace:/usr/share/aclocal/ltdl.m4:354: -1- AU_DEFUN([LT_WITH_LTDL], [LTDL_INIT($@)]) -m4trace:/usr/share/aclocal/ltdl.m4:354: -1- AC_DEFUN([LT_WITH_LTDL], [AC_DIAGNOSE([obsolete], [The macro `LT_WITH_LTDL' is obsolete. -You should run autoupdate.])dnl -LTDL_INIT($@)]) -m4trace:/usr/share/aclocal/ltdl.m4:367: -1- AC_DEFUN([_LTDL_SETUP], [AC_REQUIRE([AC_PROG_CC])dnl -AC_REQUIRE([LT_SYS_MODULE_EXT])dnl -AC_REQUIRE([LT_SYS_MODULE_PATH])dnl -AC_REQUIRE([LT_SYS_DLSEARCH_PATH])dnl -AC_REQUIRE([LT_LIB_DLLOAD])dnl -AC_REQUIRE([LT_SYS_SYMBOL_USCORE])dnl -AC_REQUIRE([LT_FUNC_DLSYM_USCORE])dnl -AC_REQUIRE([LT_SYS_DLOPEN_DEPLIBS])dnl -AC_REQUIRE([gl_FUNC_ARGZ])dnl - -m4_require([_LT_CHECK_OBJDIR])dnl -m4_require([_LT_HEADER_DLFCN])dnl -m4_require([_LT_CHECK_DLPREOPEN])dnl -m4_require([_LT_DECL_SED])dnl - -dnl Don't require this, or it will be expanded earlier than the code -dnl that sets the variables it relies on: -_LT_ENABLE_INSTALL - -dnl _LTDL_MODE specific code must be called at least once: -_LTDL_MODE_DISPATCH - -# In order that ltdl.c can compile, find out the first AC_CONFIG_HEADERS -# the user used. This is so that ltdl.h can pick up the parent projects -# config.h file, The first file in AC_CONFIG_HEADERS must contain the -# definitions required by ltdl.c. -# FIXME: Remove use of undocumented AC_LIST_HEADERS (2.59 compatibility). -AC_CONFIG_COMMANDS_PRE([dnl -m4_pattern_allow([^LT_CONFIG_H$])dnl -m4_ifset([AH_HEADER], - [LT_CONFIG_H=AH_HEADER], - [m4_ifset([AC_LIST_HEADERS], - [LT_CONFIG_H=`echo "AC_LIST_HEADERS" | $SED 's,^[[ ]]*,,;s,[[ :]].*$,,'`], - [])])]) -AC_SUBST([LT_CONFIG_H]) - -AC_CHECK_HEADERS([unistd.h dl.h sys/dl.h dld.h mach-o/dyld.h dirent.h], - [], [], [AC_INCLUDES_DEFAULT]) - -AC_CHECK_FUNCS([closedir opendir readdir], [], [AC_LIBOBJ([lt__dirent])]) -AC_CHECK_FUNCS([strlcat strlcpy], [], [AC_LIBOBJ([lt__strl])]) - -m4_pattern_allow([LT_LIBEXT])dnl -AC_DEFINE_UNQUOTED([LT_LIBEXT],["$libext"],[The archive extension]) - -name= -eval "lt_libprefix=\"$libname_spec\"" -m4_pattern_allow([LT_LIBPREFIX])dnl -AC_DEFINE_UNQUOTED([LT_LIBPREFIX],["$lt_libprefix"],[The archive prefix]) - -name=ltdl -eval "LTDLOPEN=\"$libname_spec\"" -AC_SUBST([LTDLOPEN]) -]) -m4trace:/usr/share/aclocal/ltdl.m4:443: -1- AC_DEFUN([LT_SYS_DLOPEN_DEPLIBS], [AC_REQUIRE([AC_CANONICAL_HOST])dnl -AC_CACHE_CHECK([whether deplibs are loaded by dlopen], - [lt_cv_sys_dlopen_deplibs], - [# PORTME does your system automatically load deplibs for dlopen? - # or its logical equivalent (e.g. shl_load for HP-UX < 11) - # For now, we just catch OSes we know something about -- in the - # future, we'll try test this programmatically. - lt_cv_sys_dlopen_deplibs=unknown - case $host_os in - aix3*|aix4.1.*|aix4.2.*) - # Unknown whether this is true for these versions of AIX, but - # we want this `case' here to explicitly catch those versions. - lt_cv_sys_dlopen_deplibs=unknown - ;; - aix[[4-9]]*) - lt_cv_sys_dlopen_deplibs=yes - ;; - amigaos*) - case $host_cpu in - powerpc) - lt_cv_sys_dlopen_deplibs=no - ;; - esac - ;; - darwin*) - # Assuming the user has installed a libdl from somewhere, this is true - # If you are looking for one http://www.opendarwin.org/projects/dlcompat - lt_cv_sys_dlopen_deplibs=yes - ;; - freebsd* | dragonfly*) - lt_cv_sys_dlopen_deplibs=yes - ;; - gnu* | linux* | k*bsd*-gnu | kopensolaris*-gnu) - # GNU and its variants, using gnu ld.so (Glibc) - lt_cv_sys_dlopen_deplibs=yes - ;; - hpux10*|hpux11*) - lt_cv_sys_dlopen_deplibs=yes - ;; - interix*) - lt_cv_sys_dlopen_deplibs=yes - ;; - irix[[12345]]*|irix6.[[01]]*) - # Catch all versions of IRIX before 6.2, and indicate that we don't - # know how it worked for any of those versions. - lt_cv_sys_dlopen_deplibs=unknown - ;; - irix*) - # The case above catches anything before 6.2, and it's known that - # at 6.2 and later dlopen does load deplibs. - lt_cv_sys_dlopen_deplibs=yes - ;; - netbsd* | netbsdelf*-gnu) - lt_cv_sys_dlopen_deplibs=yes - ;; - openbsd*) - lt_cv_sys_dlopen_deplibs=yes - ;; - osf[[1234]]*) - # dlopen did load deplibs (at least at 4.x), but until the 5.x series, - # it did *not* use an RPATH in a shared library to find objects the - # library depends on, so we explicitly say `no'. - lt_cv_sys_dlopen_deplibs=no - ;; - osf5.0|osf5.0a|osf5.1) - # dlopen *does* load deplibs and with the right loader patch applied - # it even uses RPATH in a shared library to search for shared objects - # that the library depends on, but there's no easy way to know if that - # patch is installed. Since this is the case, all we can really - # say is unknown -- it depends on the patch being installed. If - # it is, this changes to `yes'. Without it, it would be `no'. - lt_cv_sys_dlopen_deplibs=unknown - ;; - osf*) - # the two cases above should catch all versions of osf <= 5.1. Read - # the comments above for what we know about them. - # At > 5.1, deplibs are loaded *and* any RPATH in a shared library - # is used to find them so we can finally say `yes'. - lt_cv_sys_dlopen_deplibs=yes - ;; - qnx*) - lt_cv_sys_dlopen_deplibs=yes - ;; - solaris*) - lt_cv_sys_dlopen_deplibs=yes - ;; - sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) - libltdl_cv_sys_dlopen_deplibs=yes - ;; - esac - ]) -if test "$lt_cv_sys_dlopen_deplibs" != yes; then - AC_DEFINE([LTDL_DLOPEN_DEPLIBS], [1], - [Define if the OS needs help to load dependent libraries for dlopen().]) -fi -]) -m4trace:/usr/share/aclocal/ltdl.m4:542: -1- AU_DEFUN([AC_LTDL_SYS_DLOPEN_DEPLIBS], [m4_if($#, 0, [LT_SYS_DLOPEN_DEPLIBS], [LT_SYS_DLOPEN_DEPLIBS($@)])]) -m4trace:/usr/share/aclocal/ltdl.m4:542: -1- AC_DEFUN([AC_LTDL_SYS_DLOPEN_DEPLIBS], [AC_DIAGNOSE([obsolete], [The macro `AC_LTDL_SYS_DLOPEN_DEPLIBS' is obsolete. -You should run autoupdate.])dnl -m4_if($#, 0, [LT_SYS_DLOPEN_DEPLIBS], [LT_SYS_DLOPEN_DEPLIBS($@)])]) -m4trace:/usr/share/aclocal/ltdl.m4:549: -1- AC_DEFUN([LT_SYS_MODULE_EXT], [m4_require([_LT_SYS_DYNAMIC_LINKER])dnl -AC_CACHE_CHECK([which extension is used for runtime loadable modules], - [libltdl_cv_shlibext], -[ -module=yes -eval libltdl_cv_shlibext=$shrext_cmds - ]) -if test -n "$libltdl_cv_shlibext"; then - m4_pattern_allow([LT_MODULE_EXT])dnl - AC_DEFINE_UNQUOTED([LT_MODULE_EXT], ["$libltdl_cv_shlibext"], - [Define to the extension used for runtime loadable modules, say, ".so".]) -fi -]) -m4trace:/usr/share/aclocal/ltdl.m4:565: -1- AU_DEFUN([AC_LTDL_SHLIBEXT], [m4_if($#, 0, [LT_SYS_MODULE_EXT], [LT_SYS_MODULE_EXT($@)])]) -m4trace:/usr/share/aclocal/ltdl.m4:565: -1- AC_DEFUN([AC_LTDL_SHLIBEXT], [AC_DIAGNOSE([obsolete], [The macro `AC_LTDL_SHLIBEXT' is obsolete. -You should run autoupdate.])dnl -m4_if($#, 0, [LT_SYS_MODULE_EXT], [LT_SYS_MODULE_EXT($@)])]) -m4trace:/usr/share/aclocal/ltdl.m4:572: -1- AC_DEFUN([LT_SYS_MODULE_PATH], [m4_require([_LT_SYS_DYNAMIC_LINKER])dnl -AC_CACHE_CHECK([which variable specifies run-time module search path], - [lt_cv_module_path_var], [lt_cv_module_path_var="$shlibpath_var"]) -if test -n "$lt_cv_module_path_var"; then - m4_pattern_allow([LT_MODULE_PATH_VAR])dnl - AC_DEFINE_UNQUOTED([LT_MODULE_PATH_VAR], ["$lt_cv_module_path_var"], - [Define to the name of the environment variable that determines the run-time module search path.]) -fi -]) -m4trace:/usr/share/aclocal/ltdl.m4:584: -1- AU_DEFUN([AC_LTDL_SHLIBPATH], [m4_if($#, 0, [LT_SYS_MODULE_PATH], [LT_SYS_MODULE_PATH($@)])]) -m4trace:/usr/share/aclocal/ltdl.m4:584: -1- AC_DEFUN([AC_LTDL_SHLIBPATH], [AC_DIAGNOSE([obsolete], [The macro `AC_LTDL_SHLIBPATH' is obsolete. -You should run autoupdate.])dnl -m4_if($#, 0, [LT_SYS_MODULE_PATH], [LT_SYS_MODULE_PATH($@)])]) -m4trace:/usr/share/aclocal/ltdl.m4:591: -1- AC_DEFUN([LT_SYS_DLSEARCH_PATH], [m4_require([_LT_SYS_DYNAMIC_LINKER])dnl -AC_CACHE_CHECK([for the default library search path], - [lt_cv_sys_dlsearch_path], - [lt_cv_sys_dlsearch_path="$sys_lib_dlsearch_path_spec"]) -if test -n "$lt_cv_sys_dlsearch_path"; then - sys_dlsearch_path= - for dir in $lt_cv_sys_dlsearch_path; do - if test -z "$sys_dlsearch_path"; then - sys_dlsearch_path="$dir" - else - sys_dlsearch_path="$sys_dlsearch_path$PATH_SEPARATOR$dir" - fi - done - m4_pattern_allow([LT_DLSEARCH_PATH])dnl - AC_DEFINE_UNQUOTED([LT_DLSEARCH_PATH], ["$sys_dlsearch_path"], - [Define to the system default library search path.]) -fi -]) -m4trace:/usr/share/aclocal/ltdl.m4:612: -1- AU_DEFUN([AC_LTDL_SYSSEARCHPATH], [m4_if($#, 0, [LT_SYS_DLSEARCH_PATH], [LT_SYS_DLSEARCH_PATH($@)])]) -m4trace:/usr/share/aclocal/ltdl.m4:612: -1- AC_DEFUN([AC_LTDL_SYSSEARCHPATH], [AC_DIAGNOSE([obsolete], [The macro `AC_LTDL_SYSSEARCHPATH' is obsolete. -You should run autoupdate.])dnl -m4_if($#, 0, [LT_SYS_DLSEARCH_PATH], [LT_SYS_DLSEARCH_PATH($@)])]) -m4trace:/usr/share/aclocal/ltdl.m4:638: -1- AC_DEFUN([LT_LIB_DLLOAD], [m4_pattern_allow([^LT_DLLOADERS$]) -LT_DLLOADERS= -AC_SUBST([LT_DLLOADERS]) - -AC_LANG_PUSH([C]) - -LIBADD_DLOPEN= -AC_SEARCH_LIBS([dlopen], [dl], - [AC_DEFINE([HAVE_LIBDL], [1], - [Define if you have the libdl library or equivalent.]) - if test "$ac_cv_search_dlopen" != "none required" ; then - LIBADD_DLOPEN="-ldl" - fi - libltdl_cv_lib_dl_dlopen="yes" - LT_DLLOADERS="$LT_DLLOADERS ${lt_dlopen_dir+$lt_dlopen_dir/}dlopen.la"], - [AC_LINK_IFELSE([AC_LANG_PROGRAM([[#if HAVE_DLFCN_H -# include -#endif - ]], [[dlopen(0, 0);]])], - [AC_DEFINE([HAVE_LIBDL], [1], - [Define if you have the libdl library or equivalent.]) - libltdl_cv_func_dlopen="yes" - LT_DLLOADERS="$LT_DLLOADERS ${lt_dlopen_dir+$lt_dlopen_dir/}dlopen.la"], - [AC_CHECK_LIB([svld], [dlopen], - [AC_DEFINE([HAVE_LIBDL], [1], - [Define if you have the libdl library or equivalent.]) - LIBADD_DLOPEN="-lsvld" libltdl_cv_func_dlopen="yes" - LT_DLLOADERS="$LT_DLLOADERS ${lt_dlopen_dir+$lt_dlopen_dir/}dlopen.la"])])]) -if test x"$libltdl_cv_func_dlopen" = xyes || test x"$libltdl_cv_lib_dl_dlopen" = xyes -then - lt_save_LIBS="$LIBS" - LIBS="$LIBS $LIBADD_DLOPEN" - AC_CHECK_FUNCS([dlerror]) - LIBS="$lt_save_LIBS" -fi -AC_SUBST([LIBADD_DLOPEN]) - -LIBADD_SHL_LOAD= -AC_CHECK_FUNC([shl_load], - [AC_DEFINE([HAVE_SHL_LOAD], [1], - [Define if you have the shl_load function.]) - LT_DLLOADERS="$LT_DLLOADERS ${lt_dlopen_dir+$lt_dlopen_dir/}shl_load.la"], - [AC_CHECK_LIB([dld], [shl_load], - [AC_DEFINE([HAVE_SHL_LOAD], [1], - [Define if you have the shl_load function.]) - LT_DLLOADERS="$LT_DLLOADERS ${lt_dlopen_dir+$lt_dlopen_dir/}shl_load.la" - LIBADD_SHL_LOAD="-ldld"])]) -AC_SUBST([LIBADD_SHL_LOAD]) - -case $host_os in -darwin[[1567]].*) -# We only want this for pre-Mac OS X 10.4. - AC_CHECK_FUNC([_dyld_func_lookup], - [AC_DEFINE([HAVE_DYLD], [1], - [Define if you have the _dyld_func_lookup function.]) - LT_DLLOADERS="$LT_DLLOADERS ${lt_dlopen_dir+$lt_dlopen_dir/}dyld.la"]) - ;; -beos*) - LT_DLLOADERS="$LT_DLLOADERS ${lt_dlopen_dir+$lt_dlopen_dir/}load_add_on.la" - ;; -cygwin* | mingw* | os2* | pw32*) - AC_CHECK_DECLS([cygwin_conv_path], [], [], [[#include ]]) - LT_DLLOADERS="$LT_DLLOADERS ${lt_dlopen_dir+$lt_dlopen_dir/}loadlibrary.la" - ;; -esac - -AC_CHECK_LIB([dld], [dld_link], - [AC_DEFINE([HAVE_DLD], [1], - [Define if you have the GNU dld library.]) - LT_DLLOADERS="$LT_DLLOADERS ${lt_dlopen_dir+$lt_dlopen_dir/}dld_link.la"]) -AC_SUBST([LIBADD_DLD_LINK]) - -m4_pattern_allow([^LT_DLPREOPEN$]) -LT_DLPREOPEN= -if test -n "$LT_DLLOADERS" -then - for lt_loader in $LT_DLLOADERS; do - LT_DLPREOPEN="$LT_DLPREOPEN-dlpreopen $lt_loader " - done - AC_DEFINE([HAVE_LIBDLLOADER], [1], - [Define if libdlloader will be built on this platform]) -fi -AC_SUBST([LT_DLPREOPEN]) - -dnl This isn't used anymore, but set it for backwards compatibility -LIBADD_DL="$LIBADD_DLOPEN $LIBADD_SHL_LOAD" -AC_SUBST([LIBADD_DL]) - -AC_LANG_POP -]) -m4trace:/usr/share/aclocal/ltdl.m4:731: -1- AU_DEFUN([AC_LTDL_DLLIB], [m4_if($#, 0, [LT_LIB_DLLOAD], [LT_LIB_DLLOAD($@)])]) -m4trace:/usr/share/aclocal/ltdl.m4:731: -1- AC_DEFUN([AC_LTDL_DLLIB], [AC_DIAGNOSE([obsolete], [The macro `AC_LTDL_DLLIB' is obsolete. -You should run autoupdate.])dnl -m4_if($#, 0, [LT_LIB_DLLOAD], [LT_LIB_DLLOAD($@)])]) -m4trace:/usr/share/aclocal/ltdl.m4:739: -1- AC_DEFUN([LT_SYS_SYMBOL_USCORE], [m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl -AC_CACHE_CHECK([for _ prefix in compiled symbols], - [lt_cv_sys_symbol_underscore], - [lt_cv_sys_symbol_underscore=no - cat > conftest.$ac_ext <<_LT_EOF -void nm_test_func(){} -int main(){nm_test_func;return 0;} -_LT_EOF - if AC_TRY_EVAL(ac_compile); then - # Now try to grab the symbols. - ac_nlist=conftest.nm - if AC_TRY_EVAL(NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $ac_nlist) && test -s "$ac_nlist"; then - # See whether the symbols have a leading underscore. - if grep '^. _nm_test_func' "$ac_nlist" >/dev/null; then - lt_cv_sys_symbol_underscore=yes - else - if grep '^. nm_test_func ' "$ac_nlist" >/dev/null; then - : - else - echo "configure: cannot find nm_test_func in $ac_nlist" >&AS_MESSAGE_LOG_FD - fi - fi - else - echo "configure: cannot run $lt_cv_sys_global_symbol_pipe" >&AS_MESSAGE_LOG_FD - fi - else - echo "configure: failed program was:" >&AS_MESSAGE_LOG_FD - cat conftest.c >&AS_MESSAGE_LOG_FD - fi - rm -rf conftest* - ]) - sys_symbol_underscore=$lt_cv_sys_symbol_underscore - AC_SUBST([sys_symbol_underscore]) -]) -m4trace:/usr/share/aclocal/ltdl.m4:776: -1- AU_DEFUN([AC_LTDL_SYMBOL_USCORE], [m4_if($#, 0, [LT_SYS_SYMBOL_USCORE], [LT_SYS_SYMBOL_USCORE($@)])]) -m4trace:/usr/share/aclocal/ltdl.m4:776: -1- AC_DEFUN([AC_LTDL_SYMBOL_USCORE], [AC_DIAGNOSE([obsolete], [The macro `AC_LTDL_SYMBOL_USCORE' is obsolete. -You should run autoupdate.])dnl -m4_if($#, 0, [LT_SYS_SYMBOL_USCORE], [LT_SYS_SYMBOL_USCORE($@)])]) -m4trace:/usr/share/aclocal/ltdl.m4:783: -1- AC_DEFUN([LT_FUNC_DLSYM_USCORE], [AC_REQUIRE([LT_SYS_SYMBOL_USCORE])dnl -if test x"$lt_cv_sys_symbol_underscore" = xyes; then - if test x"$libltdl_cv_func_dlopen" = xyes || - test x"$libltdl_cv_lib_dl_dlopen" = xyes ; then - AC_CACHE_CHECK([whether we have to add an underscore for dlsym], - [libltdl_cv_need_uscore], - [libltdl_cv_need_uscore=unknown - save_LIBS="$LIBS" - LIBS="$LIBS $LIBADD_DLOPEN" - _LT_TRY_DLOPEN_SELF( - [libltdl_cv_need_uscore=no], [libltdl_cv_need_uscore=yes], - [], [libltdl_cv_need_uscore=cross]) - LIBS="$save_LIBS" - ]) - fi -fi - -if test x"$libltdl_cv_need_uscore" = xyes; then - AC_DEFINE([NEED_USCORE], [1], - [Define if dlsym() requires a leading underscore in symbol names.]) -fi -]) -m4trace:/usr/share/aclocal/ltdl.m4:808: -1- AU_DEFUN([AC_LTDL_DLSYM_USCORE], [m4_if($#, 0, [LT_FUNC_DLSYM_USCORE], [LT_FUNC_DLSYM_USCORE($@)])]) -m4trace:/usr/share/aclocal/ltdl.m4:808: -1- AC_DEFUN([AC_LTDL_DLSYM_USCORE], [AC_DIAGNOSE([obsolete], [The macro `AC_LTDL_DLSYM_USCORE' is obsolete. -You should run autoupdate.])dnl -m4_if($#, 0, [LT_FUNC_DLSYM_USCORE], [LT_FUNC_DLSYM_USCORE($@)])]) -m4trace:/usr/share/aclocal/ltoptions.m4:14: -1- AC_DEFUN([LTOPTIONS_VERSION], [m4_if([1])]) -m4trace:/usr/share/aclocal/ltoptions.m4:111: -1- AU_DEFUN([AC_LIBTOOL_DLOPEN], [_LT_SET_OPTION([LT_INIT], [dlopen]) -AC_DIAGNOSE([obsolete], -[$0: Remove this warning and the call to _LT_SET_OPTION when you -put the `dlopen' option into LT_INIT's first parameter.]) -]) -m4trace:/usr/share/aclocal/ltoptions.m4:111: -1- AC_DEFUN([AC_LIBTOOL_DLOPEN], [AC_DIAGNOSE([obsolete], [The macro `AC_LIBTOOL_DLOPEN' is obsolete. -You should run autoupdate.])dnl -_LT_SET_OPTION([LT_INIT], [dlopen]) -AC_DIAGNOSE([obsolete], -[$0: Remove this warning and the call to _LT_SET_OPTION when you -put the `dlopen' option into LT_INIT's first parameter.]) -]) -m4trace:/usr/share/aclocal/ltoptions.m4:146: -1- AU_DEFUN([AC_LIBTOOL_WIN32_DLL], [AC_REQUIRE([AC_CANONICAL_HOST])dnl -_LT_SET_OPTION([LT_INIT], [win32-dll]) -AC_DIAGNOSE([obsolete], -[$0: Remove this warning and the call to _LT_SET_OPTION when you -put the `win32-dll' option into LT_INIT's first parameter.]) -]) -m4trace:/usr/share/aclocal/ltoptions.m4:146: -1- AC_DEFUN([AC_LIBTOOL_WIN32_DLL], [AC_DIAGNOSE([obsolete], [The macro `AC_LIBTOOL_WIN32_DLL' is obsolete. -You should run autoupdate.])dnl -AC_REQUIRE([AC_CANONICAL_HOST])dnl -_LT_SET_OPTION([LT_INIT], [win32-dll]) -AC_DIAGNOSE([obsolete], -[$0: Remove this warning and the call to _LT_SET_OPTION when you -put the `win32-dll' option into LT_INIT's first parameter.]) -]) -m4trace:/usr/share/aclocal/ltoptions.m4:195: -1- AC_DEFUN([AC_ENABLE_SHARED], [_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[shared]) -]) -m4trace:/usr/share/aclocal/ltoptions.m4:199: -1- AC_DEFUN([AC_DISABLE_SHARED], [_LT_SET_OPTION([LT_INIT], [disable-shared]) -]) -m4trace:/usr/share/aclocal/ltoptions.m4:203: -1- AU_DEFUN([AM_ENABLE_SHARED], [AC_ENABLE_SHARED($@)]) -m4trace:/usr/share/aclocal/ltoptions.m4:203: -1- AC_DEFUN([AM_ENABLE_SHARED], [AC_DIAGNOSE([obsolete], [The macro `AM_ENABLE_SHARED' is obsolete. -You should run autoupdate.])dnl -AC_ENABLE_SHARED($@)]) -m4trace:/usr/share/aclocal/ltoptions.m4:204: -1- AU_DEFUN([AM_DISABLE_SHARED], [AC_DISABLE_SHARED($@)]) -m4trace:/usr/share/aclocal/ltoptions.m4:204: -1- AC_DEFUN([AM_DISABLE_SHARED], [AC_DIAGNOSE([obsolete], [The macro `AM_DISABLE_SHARED' is obsolete. -You should run autoupdate.])dnl -AC_DISABLE_SHARED($@)]) -m4trace:/usr/share/aclocal/ltoptions.m4:249: -1- AC_DEFUN([AC_ENABLE_STATIC], [_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[static]) -]) -m4trace:/usr/share/aclocal/ltoptions.m4:253: -1- AC_DEFUN([AC_DISABLE_STATIC], [_LT_SET_OPTION([LT_INIT], [disable-static]) -]) -m4trace:/usr/share/aclocal/ltoptions.m4:257: -1- AU_DEFUN([AM_ENABLE_STATIC], [AC_ENABLE_STATIC($@)]) -m4trace:/usr/share/aclocal/ltoptions.m4:257: -1- AC_DEFUN([AM_ENABLE_STATIC], [AC_DIAGNOSE([obsolete], [The macro `AM_ENABLE_STATIC' is obsolete. -You should run autoupdate.])dnl -AC_ENABLE_STATIC($@)]) -m4trace:/usr/share/aclocal/ltoptions.m4:258: -1- AU_DEFUN([AM_DISABLE_STATIC], [AC_DISABLE_STATIC($@)]) -m4trace:/usr/share/aclocal/ltoptions.m4:258: -1- AC_DEFUN([AM_DISABLE_STATIC], [AC_DIAGNOSE([obsolete], [The macro `AM_DISABLE_STATIC' is obsolete. -You should run autoupdate.])dnl -AC_DISABLE_STATIC($@)]) -m4trace:/usr/share/aclocal/ltoptions.m4:303: -1- AU_DEFUN([AC_ENABLE_FAST_INSTALL], [_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[fast-install]) -AC_DIAGNOSE([obsolete], -[$0: Remove this warning and the call to _LT_SET_OPTION when you put -the `fast-install' option into LT_INIT's first parameter.]) -]) -m4trace:/usr/share/aclocal/ltoptions.m4:303: -1- AC_DEFUN([AC_ENABLE_FAST_INSTALL], [AC_DIAGNOSE([obsolete], [The macro `AC_ENABLE_FAST_INSTALL' is obsolete. -You should run autoupdate.])dnl -_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[fast-install]) -AC_DIAGNOSE([obsolete], -[$0: Remove this warning and the call to _LT_SET_OPTION when you put -the `fast-install' option into LT_INIT's first parameter.]) -]) -m4trace:/usr/share/aclocal/ltoptions.m4:310: -1- AU_DEFUN([AC_DISABLE_FAST_INSTALL], [_LT_SET_OPTION([LT_INIT], [disable-fast-install]) -AC_DIAGNOSE([obsolete], -[$0: Remove this warning and the call to _LT_SET_OPTION when you put -the `disable-fast-install' option into LT_INIT's first parameter.]) -]) -m4trace:/usr/share/aclocal/ltoptions.m4:310: -1- AC_DEFUN([AC_DISABLE_FAST_INSTALL], [AC_DIAGNOSE([obsolete], [The macro `AC_DISABLE_FAST_INSTALL' is obsolete. -You should run autoupdate.])dnl -_LT_SET_OPTION([LT_INIT], [disable-fast-install]) -AC_DIAGNOSE([obsolete], -[$0: Remove this warning and the call to _LT_SET_OPTION when you put -the `disable-fast-install' option into LT_INIT's first parameter.]) -]) -m4trace:/usr/share/aclocal/ltoptions.m4:343: -1- AU_DEFUN([AC_LIBTOOL_PICMODE], [_LT_SET_OPTION([LT_INIT], [pic-only]) -AC_DIAGNOSE([obsolete], -[$0: Remove this warning and the call to _LT_SET_OPTION when you -put the `pic-only' option into LT_INIT's first parameter.]) -]) -m4trace:/usr/share/aclocal/ltoptions.m4:343: -1- AC_DEFUN([AC_LIBTOOL_PICMODE], [AC_DIAGNOSE([obsolete], [The macro `AC_LIBTOOL_PICMODE' is obsolete. -You should run autoupdate.])dnl -_LT_SET_OPTION([LT_INIT], [pic-only]) -AC_DIAGNOSE([obsolete], -[$0: Remove this warning and the call to _LT_SET_OPTION when you -put the `pic-only' option into LT_INIT's first parameter.]) -]) -m4trace:/usr/share/aclocal/ltsugar.m4:13: -1- AC_DEFUN([LTSUGAR_VERSION], [m4_if([0.1])]) -m4trace:/usr/share/aclocal/ltversion.m4:18: -1- AC_DEFUN([LTVERSION_VERSION], [macro_version='2.4' -macro_revision='1.3293' -_LT_DECL(, macro_version, 0, [Which release of libtool.m4 was used?]) -_LT_DECL(, macro_revision, 0) -]) -m4trace:/usr/share/aclocal/lt~obsolete.m4:36: -1- AC_DEFUN([LTOBSOLETE_VERSION], [m4_if([1])]) -m4trace:/usr/share/aclocal/lt~obsolete.m4:40: -1- AC_DEFUN([_LT_AC_PROG_ECHO_BACKSLASH]) -m4trace:/usr/share/aclocal/lt~obsolete.m4:41: -1- AC_DEFUN([_LT_AC_SHELL_INIT]) -m4trace:/usr/share/aclocal/lt~obsolete.m4:42: -1- AC_DEFUN([_LT_AC_SYS_LIBPATH_AIX]) -m4trace:/usr/share/aclocal/lt~obsolete.m4:44: -1- AC_DEFUN([_LT_AC_TAGVAR]) -m4trace:/usr/share/aclocal/lt~obsolete.m4:45: -1- AC_DEFUN([AC_LTDL_ENABLE_INSTALL]) -m4trace:/usr/share/aclocal/lt~obsolete.m4:46: -1- AC_DEFUN([AC_LTDL_PREOPEN]) -m4trace:/usr/share/aclocal/lt~obsolete.m4:47: -1- AC_DEFUN([_LT_AC_SYS_COMPILER]) -m4trace:/usr/share/aclocal/lt~obsolete.m4:48: -1- AC_DEFUN([_LT_AC_LOCK]) -m4trace:/usr/share/aclocal/lt~obsolete.m4:49: -1- AC_DEFUN([AC_LIBTOOL_SYS_OLD_ARCHIVE]) -m4trace:/usr/share/aclocal/lt~obsolete.m4:50: -1- AC_DEFUN([_LT_AC_TRY_DLOPEN_SELF]) -m4trace:/usr/share/aclocal/lt~obsolete.m4:51: -1- AC_DEFUN([AC_LIBTOOL_PROG_CC_C_O]) -m4trace:/usr/share/aclocal/lt~obsolete.m4:52: -1- AC_DEFUN([AC_LIBTOOL_SYS_HARD_LINK_LOCKS]) -m4trace:/usr/share/aclocal/lt~obsolete.m4:53: -1- AC_DEFUN([AC_LIBTOOL_OBJDIR]) -m4trace:/usr/share/aclocal/lt~obsolete.m4:54: -1- AC_DEFUN([AC_LTDL_OBJDIR]) -m4trace:/usr/share/aclocal/lt~obsolete.m4:55: -1- AC_DEFUN([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH]) -m4trace:/usr/share/aclocal/lt~obsolete.m4:56: -1- AC_DEFUN([AC_LIBTOOL_SYS_LIB_STRIP]) -m4trace:/usr/share/aclocal/lt~obsolete.m4:57: -1- AC_DEFUN([AC_PATH_MAGIC]) -m4trace:/usr/share/aclocal/lt~obsolete.m4:58: -1- AC_DEFUN([AC_PROG_LD_GNU]) -m4trace:/usr/share/aclocal/lt~obsolete.m4:59: -1- AC_DEFUN([AC_PROG_LD_RELOAD_FLAG]) -m4trace:/usr/share/aclocal/lt~obsolete.m4:60: -1- AC_DEFUN([AC_DEPLIBS_CHECK_METHOD]) -m4trace:/usr/share/aclocal/lt~obsolete.m4:61: -1- AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_NO_RTTI]) -m4trace:/usr/share/aclocal/lt~obsolete.m4:62: -1- AC_DEFUN([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE]) -m4trace:/usr/share/aclocal/lt~obsolete.m4:63: -1- AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_PIC]) -m4trace:/usr/share/aclocal/lt~obsolete.m4:64: -1- AC_DEFUN([AC_LIBTOOL_PROG_LD_SHLIBS]) -m4trace:/usr/share/aclocal/lt~obsolete.m4:65: -1- AC_DEFUN([AC_LIBTOOL_POSTDEP_PREDEP]) -m4trace:/usr/share/aclocal/lt~obsolete.m4:66: -1- AC_DEFUN([LT_AC_PROG_EGREP]) -m4trace:/usr/share/aclocal/lt~obsolete.m4:71: -1- AC_DEFUN([_AC_PROG_LIBTOOL]) -m4trace:/usr/share/aclocal/lt~obsolete.m4:72: -1- AC_DEFUN([AC_LIBTOOL_SETUP]) -m4trace:/usr/share/aclocal/lt~obsolete.m4:73: -1- AC_DEFUN([_LT_AC_CHECK_DLFCN]) -m4trace:/usr/share/aclocal/lt~obsolete.m4:74: -1- AC_DEFUN([AC_LIBTOOL_SYS_DYNAMIC_LINKER]) -m4trace:/usr/share/aclocal/lt~obsolete.m4:75: -1- AC_DEFUN([_LT_AC_TAGCONFIG]) -m4trace:/usr/share/aclocal/lt~obsolete.m4:77: -1- AC_DEFUN([_LT_AC_LANG_CXX]) -m4trace:/usr/share/aclocal/lt~obsolete.m4:78: -1- AC_DEFUN([_LT_AC_LANG_F77]) -m4trace:/usr/share/aclocal/lt~obsolete.m4:79: -1- AC_DEFUN([_LT_AC_LANG_GCJ]) -m4trace:/usr/share/aclocal/lt~obsolete.m4:80: -1- AC_DEFUN([AC_LIBTOOL_LANG_C_CONFIG]) -m4trace:/usr/share/aclocal/lt~obsolete.m4:81: -1- AC_DEFUN([_LT_AC_LANG_C_CONFIG]) -m4trace:/usr/share/aclocal/lt~obsolete.m4:82: -1- AC_DEFUN([AC_LIBTOOL_LANG_CXX_CONFIG]) -m4trace:/usr/share/aclocal/lt~obsolete.m4:83: -1- AC_DEFUN([_LT_AC_LANG_CXX_CONFIG]) -m4trace:/usr/share/aclocal/lt~obsolete.m4:84: -1- AC_DEFUN([AC_LIBTOOL_LANG_F77_CONFIG]) -m4trace:/usr/share/aclocal/lt~obsolete.m4:85: -1- AC_DEFUN([_LT_AC_LANG_F77_CONFIG]) -m4trace:/usr/share/aclocal/lt~obsolete.m4:86: -1- AC_DEFUN([AC_LIBTOOL_LANG_GCJ_CONFIG]) -m4trace:/usr/share/aclocal/lt~obsolete.m4:87: -1- AC_DEFUN([_LT_AC_LANG_GCJ_CONFIG]) -m4trace:/usr/share/aclocal/lt~obsolete.m4:88: -1- AC_DEFUN([AC_LIBTOOL_LANG_RC_CONFIG]) -m4trace:/usr/share/aclocal/lt~obsolete.m4:89: -1- AC_DEFUN([_LT_AC_LANG_RC_CONFIG]) -m4trace:/usr/share/aclocal/lt~obsolete.m4:90: -1- AC_DEFUN([AC_LIBTOOL_CONFIG]) -m4trace:/usr/share/aclocal/lt~obsolete.m4:91: -1- AC_DEFUN([_LT_AC_FILE_LTDLL_C]) -m4trace:/usr/share/aclocal/lt~obsolete.m4:93: -1- AC_DEFUN([_LT_AC_PROG_CXXCPP]) -m4trace:/usr/share/aclocal/lt~obsolete.m4:96: -1- AC_DEFUN([_LT_PROG_F77]) -m4trace:/usr/share/aclocal/lt~obsolete.m4:97: -1- AC_DEFUN([_LT_PROG_FC]) -m4trace:/usr/share/aclocal/lt~obsolete.m4:98: -1- AC_DEFUN([_LT_PROG_CXX]) -m4trace:/usr/share/aclocal-1.11/amversion.m4:14: -1- AC_DEFUN([AM_AUTOMAKE_VERSION], [am__api_version='1.11' -dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to -dnl require some minimum version. Point them to the right macro. -m4_if([$1], [1.11.1], [], - [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl -]) -m4trace:/usr/share/aclocal-1.11/amversion.m4:33: -1- AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION], [AM_AUTOMAKE_VERSION([1.11.1])dnl -m4_ifndef([AC_AUTOCONF_VERSION], - [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl -_AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))]) -m4trace:/usr/share/aclocal-1.11/auxdir.m4:47: -1- AC_DEFUN([AM_AUX_DIR_EXPAND], [dnl Rely on autoconf to set up CDPATH properly. -AC_PREREQ([2.50])dnl -# expand $ac_aux_dir to an absolute path -am_aux_dir=`cd $ac_aux_dir && pwd` -]) -m4trace:/usr/share/aclocal-1.11/cond.m4:15: -1- AC_DEFUN([AM_CONDITIONAL], [AC_PREREQ(2.52)dnl - ifelse([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])], - [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl -AC_SUBST([$1_TRUE])dnl -AC_SUBST([$1_FALSE])dnl -_AM_SUBST_NOTMAKE([$1_TRUE])dnl -_AM_SUBST_NOTMAKE([$1_FALSE])dnl -m4_define([_AM_COND_VALUE_$1], [$2])dnl -if $2; then - $1_TRUE= - $1_FALSE='#' -else - $1_TRUE='#' - $1_FALSE= -fi -AC_CONFIG_COMMANDS_PRE( -[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then - AC_MSG_ERROR([[conditional "$1" was never defined. -Usually this means the macro was only invoked conditionally.]]) -fi])]) -m4trace:/usr/share/aclocal-1.11/depend.m4:28: -1- AC_DEFUN([_AM_DEPENDENCIES], [AC_REQUIRE([AM_SET_DEPDIR])dnl -AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl -AC_REQUIRE([AM_MAKE_INCLUDE])dnl -AC_REQUIRE([AM_DEP_TRACK])dnl - -ifelse([$1], CC, [depcc="$CC" am_compiler_list=], - [$1], CXX, [depcc="$CXX" am_compiler_list=], - [$1], OBJC, [depcc="$OBJC" am_compiler_list='gcc3 gcc'], - [$1], UPC, [depcc="$UPC" am_compiler_list=], - [$1], GCJ, [depcc="$GCJ" am_compiler_list='gcc3 gcc'], - [depcc="$$1" am_compiler_list=]) - -AC_CACHE_CHECK([dependency style of $depcc], - [am_cv_$1_dependencies_compiler_type], -[if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then - # We make a subdir and do the tests there. Otherwise we can end up - # making bogus files that we don't know about and never remove. For - # instance it was reported that on HP-UX the gcc test will end up - # making a dummy file named `D' -- because `-MD' means `put the output - # in D'. - mkdir conftest.dir - # Copy depcomp to subdir because otherwise we won't find it if we're - # using a relative directory. - cp "$am_depcomp" conftest.dir - cd conftest.dir - # We will build objects and dependencies in a subdirectory because - # it helps to detect inapplicable dependency modes. For instance - # both Tru64's cc and ICC support -MD to output dependencies as a - # side effect of compilation, but ICC will put the dependencies in - # the current directory while Tru64 will put them in the object - # directory. - mkdir sub - - am_cv_$1_dependencies_compiler_type=none - if test "$am_compiler_list" = ""; then - am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp` - fi - am__universal=false - m4_case([$1], [CC], - [case " $depcc " in #( - *\ -arch\ *\ -arch\ *) am__universal=true ;; - esac], - [CXX], - [case " $depcc " in #( - *\ -arch\ *\ -arch\ *) am__universal=true ;; - esac]) - - for depmode in $am_compiler_list; do - # Setup a source with many dependencies, because some compilers - # like to wrap large dependency lists on column 80 (with \), and - # we should not choose a depcomp mode which is confused by this. - # - # We need to recreate these files for each test, as the compiler may - # overwrite some of them when testing with obscure command lines. - # This happens at least with the AIX C compiler. - : > sub/conftest.c - for i in 1 2 3 4 5 6; do - echo '#include "conftst'$i'.h"' >> sub/conftest.c - # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with - # Solaris 8's {/usr,}/bin/sh. - touch sub/conftst$i.h - done - echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf - - # We check with `-c' and `-o' for the sake of the "dashmstdout" - # mode. It turns out that the SunPro C++ compiler does not properly - # handle `-M -o', and we need to detect this. Also, some Intel - # versions had trouble with output in subdirs - am__obj=sub/conftest.${OBJEXT-o} - am__minus_obj="-o $am__obj" - case $depmode in - gcc) - # This depmode causes a compiler race in universal mode. - test "$am__universal" = false || continue - ;; - nosideeffect) - # after this tag, mechanisms are not by side-effect, so they'll - # only be used when explicitly requested - if test "x$enable_dependency_tracking" = xyes; then - continue - else - break - fi - ;; - msvisualcpp | msvcmsys) - # This compiler won't grok `-c -o', but also, the minuso test has - # not run yet. These depmodes are late enough in the game, and - # so weak that their functioning should not be impacted. - am__obj=conftest.${OBJEXT-o} - am__minus_obj= - ;; - none) break ;; - esac - if depmode=$depmode \ - source=sub/conftest.c object=$am__obj \ - depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ - $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \ - >/dev/null 2>conftest.err && - grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && - grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && - grep $am__obj sub/conftest.Po > /dev/null 2>&1 && - ${MAKE-make} -s -f confmf > /dev/null 2>&1; then - # icc doesn't choke on unknown options, it will just issue warnings - # or remarks (even with -Werror). So we grep stderr for any message - # that says an option was ignored or not supported. - # When given -MP, icc 7.0 and 7.1 complain thusly: - # icc: Command line warning: ignoring option '-M'; no argument required - # The diagnosis changed in icc 8.0: - # icc: Command line remark: option '-MP' not supported - if (grep 'ignoring option' conftest.err || - grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else - am_cv_$1_dependencies_compiler_type=$depmode - break - fi - fi - done - - cd .. - rm -rf conftest.dir -else - am_cv_$1_dependencies_compiler_type=none -fi -]) -AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type]) -AM_CONDITIONAL([am__fastdep$1], [ - test "x$enable_dependency_tracking" != xno \ - && test "$am_cv_$1_dependencies_compiler_type" = gcc3]) -]) -m4trace:/usr/share/aclocal-1.11/depend.m4:163: -1- AC_DEFUN([AM_SET_DEPDIR], [AC_REQUIRE([AM_SET_LEADING_DOT])dnl -AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl -]) -m4trace:/usr/share/aclocal-1.11/depend.m4:171: -1- AC_DEFUN([AM_DEP_TRACK], [AC_ARG_ENABLE(dependency-tracking, -[ --disable-dependency-tracking speeds up one-time build - --enable-dependency-tracking do not reject slow dependency extractors]) -if test "x$enable_dependency_tracking" != xno; then - am_depcomp="$ac_aux_dir/depcomp" - AMDEPBACKSLASH='\' -fi -AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno]) -AC_SUBST([AMDEPBACKSLASH])dnl -_AM_SUBST_NOTMAKE([AMDEPBACKSLASH])dnl -]) -m4trace:/usr/share/aclocal-1.11/depout.m4:14: -1- AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS], [{ - # Autoconf 2.62 quotes --file arguments for eval, but not when files - # are listed without --file. Let's play safe and only enable the eval - # if we detect the quoting. - case $CONFIG_FILES in - *\'*) eval set x "$CONFIG_FILES" ;; - *) set x $CONFIG_FILES ;; - esac - shift - for mf - do - # Strip MF so we end up with the name of the file. - mf=`echo "$mf" | sed -e 's/:.*$//'` - # Check whether this is an Automake generated Makefile or not. - # We used to match only the files named `Makefile.in', but - # some people rename them; so instead we look at the file content. - # Grep'ing the first line is not enough: some people post-process - # each Makefile.in and add a new line on top of each file to say so. - # Grep'ing the whole file is not good either: AIX grep has a line - # limit of 2048, but all sed's we know have understand at least 4000. - if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then - dirpart=`AS_DIRNAME("$mf")` - else - continue - fi - # Extract the definition of DEPDIR, am__include, and am__quote - # from the Makefile without running `make'. - DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` - test -z "$DEPDIR" && continue - am__include=`sed -n 's/^am__include = //p' < "$mf"` - test -z "am__include" && continue - am__quote=`sed -n 's/^am__quote = //p' < "$mf"` - # When using ansi2knr, U may be empty or an underscore; expand it - U=`sed -n 's/^U = //p' < "$mf"` - # Find all dependency output files, they are included files with - # $(DEPDIR) in their names. We invoke sed twice because it is the - # simplest approach to changing $(DEPDIR) to its actual value in the - # expansion. - for file in `sed -n " - s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ - sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do - # Make sure the directory exists. - test -f "$dirpart/$file" && continue - fdir=`AS_DIRNAME(["$file"])` - AS_MKDIR_P([$dirpart/$fdir]) - # echo "creating $dirpart/$file" - echo '# dummy' > "$dirpart/$file" - done - done -} -]) -m4trace:/usr/share/aclocal-1.11/depout.m4:75: -1- AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS], [AC_CONFIG_COMMANDS([depfiles], - [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS], - [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"]) -]) -m4trace:/usr/share/aclocal-1.11/init.m4:26: -1- AC_DEFUN([AM_INIT_AUTOMAKE], [AC_PREREQ([2.62])dnl -dnl Autoconf wants to disallow AM_ names. We explicitly allow -dnl the ones we care about. -m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl -AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl -AC_REQUIRE([AC_PROG_INSTALL])dnl -if test "`cd $srcdir && pwd`" != "`pwd`"; then - # Use -I$(srcdir) only when $(srcdir) != ., so that make's output - # is not polluted with repeated "-I." - AC_SUBST([am__isrc], [' -I$(srcdir)'])_AM_SUBST_NOTMAKE([am__isrc])dnl - # test to see if srcdir already configured - if test -f $srcdir/config.status; then - AC_MSG_ERROR([source directory already configured; run "make distclean" there first]) - fi -fi - -# test whether we have cygpath -if test -z "$CYGPATH_W"; then - if (cygpath --version) >/dev/null 2>/dev/null; then - CYGPATH_W='cygpath -w' - else - CYGPATH_W=echo - fi -fi -AC_SUBST([CYGPATH_W]) - -# Define the identity of the package. -dnl Distinguish between old-style and new-style calls. -m4_ifval([$2], -[m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl - AC_SUBST([PACKAGE], [$1])dnl - AC_SUBST([VERSION], [$2])], -[_AM_SET_OPTIONS([$1])dnl -dnl Diagnose old-style AC_INIT with new-style AM_AUTOMAKE_INIT. -m4_if(m4_ifdef([AC_PACKAGE_NAME], 1)m4_ifdef([AC_PACKAGE_VERSION], 1), 11,, - [m4_fatal([AC_INIT should be called with package and version arguments])])dnl - AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl - AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl - -_AM_IF_OPTION([no-define],, -[AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package]) - AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])])dnl - -# Some tools Automake needs. -AC_REQUIRE([AM_SANITY_CHECK])dnl -AC_REQUIRE([AC_ARG_PROGRAM])dnl -AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version}) -AM_MISSING_PROG(AUTOCONF, autoconf) -AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version}) -AM_MISSING_PROG(AUTOHEADER, autoheader) -AM_MISSING_PROG(MAKEINFO, makeinfo) -AC_REQUIRE([AM_PROG_INSTALL_SH])dnl -AC_REQUIRE([AM_PROG_INSTALL_STRIP])dnl -AC_REQUIRE([AM_PROG_MKDIR_P])dnl -# We need awk for the "check" target. The system "awk" is bad on -# some platforms. -AC_REQUIRE([AC_PROG_AWK])dnl -AC_REQUIRE([AC_PROG_MAKE_SET])dnl -AC_REQUIRE([AM_SET_LEADING_DOT])dnl -_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])], - [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])], - [_AM_PROG_TAR([v7])])]) -_AM_IF_OPTION([no-dependencies],, -[AC_PROVIDE_IFELSE([AC_PROG_CC], - [_AM_DEPENDENCIES(CC)], - [define([AC_PROG_CC], - defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl -AC_PROVIDE_IFELSE([AC_PROG_CXX], - [_AM_DEPENDENCIES(CXX)], - [define([AC_PROG_CXX], - defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl -AC_PROVIDE_IFELSE([AC_PROG_OBJC], - [_AM_DEPENDENCIES(OBJC)], - [define([AC_PROG_OBJC], - defn([AC_PROG_OBJC])[_AM_DEPENDENCIES(OBJC)])])dnl -]) -_AM_IF_OPTION([silent-rules], [AC_REQUIRE([AM_SILENT_RULES])])dnl -dnl The `parallel-tests' driver may need to know about EXEEXT, so add the -dnl `am__EXEEXT' conditional if _AM_COMPILER_EXEEXT was seen. This macro -dnl is hooked onto _AC_COMPILER_EXEEXT early, see below. -AC_CONFIG_COMMANDS_PRE(dnl -[m4_provide_if([_AM_COMPILER_EXEEXT], - [AM_CONDITIONAL([am__EXEEXT], [test -n "$EXEEXT"])])])dnl -]) -m4trace:/usr/share/aclocal-1.11/init.m4:126: -1- AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK], [# Compute $1's index in $config_headers. -_am_arg=$1 -_am_stamp_count=1 -for _am_header in $config_headers :; do - case $_am_header in - $_am_arg | $_am_arg:* ) - break ;; - * ) - _am_stamp_count=`expr $_am_stamp_count + 1` ;; - esac -done -echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count]) -m4trace:/usr/share/aclocal-1.11/install-sh.m4:11: -1- AC_DEFUN([AM_PROG_INSTALL_SH], [AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl -if test x"${install_sh}" != xset; then - case $am_aux_dir in - *\ * | *\ *) - install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;; - *) - install_sh="\${SHELL} $am_aux_dir/install-sh" - esac -fi -AC_SUBST(install_sh)]) -m4trace:/usr/share/aclocal-1.11/lead-dot.m4:12: -1- AC_DEFUN([AM_SET_LEADING_DOT], [rm -rf .tst 2>/dev/null -mkdir .tst 2>/dev/null -if test -d .tst; then - am__leading_dot=. -else - am__leading_dot=_ -fi -rmdir .tst 2>/dev/null -AC_SUBST([am__leading_dot])]) -m4trace:/usr/share/aclocal-1.11/make.m4:14: -1- AC_DEFUN([AM_MAKE_INCLUDE], [am_make=${MAKE-make} -cat > confinc << 'END' -am__doit: - @echo this is the am__doit target -.PHONY: am__doit -END -# If we don't find an include directive, just comment out the code. -AC_MSG_CHECKING([for style of include used by $am_make]) -am__include="#" -am__quote= -_am_result=none -# First try GNU make style include. -echo "include confinc" > confmf -# Ignore all kinds of additional output from `make'. -case `$am_make -s -f confmf 2> /dev/null` in #( -*the\ am__doit\ target*) - am__include=include - am__quote= - _am_result=GNU - ;; -esac -# Now try BSD make style include. -if test "$am__include" = "#"; then - echo '.include "confinc"' > confmf - case `$am_make -s -f confmf 2> /dev/null` in #( - *the\ am__doit\ target*) - am__include=.include - am__quote="\"" - _am_result=BSD - ;; - esac -fi -AC_SUBST([am__include]) -AC_SUBST([am__quote]) -AC_MSG_RESULT([$_am_result]) -rm -f confinc confmf -]) -m4trace:/usr/share/aclocal-1.11/missing.m4:14: -1- AC_DEFUN([AM_MISSING_PROG], [AC_REQUIRE([AM_MISSING_HAS_RUN]) -$1=${$1-"${am_missing_run}$2"} -AC_SUBST($1)]) -m4trace:/usr/share/aclocal-1.11/missing.m4:24: -1- AC_DEFUN([AM_MISSING_HAS_RUN], [AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl -AC_REQUIRE_AUX_FILE([missing])dnl -if test x"${MISSING+set}" != xset; then - case $am_aux_dir in - *\ * | *\ *) - MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;; - *) - MISSING="\${SHELL} $am_aux_dir/missing" ;; - esac -fi -# Use eval to expand $SHELL -if eval "$MISSING --run true"; then - am_missing_run="$MISSING --run " -else - am_missing_run= - AC_MSG_WARN([`missing' script is too old or missing]) -fi -]) -m4trace:/usr/share/aclocal-1.11/mkdirp.m4:11: -1- AC_DEFUN([AM_PROG_MKDIR_P], [AC_PREREQ([2.60])dnl -AC_REQUIRE([AC_PROG_MKDIR_P])dnl -dnl Automake 1.8 to 1.9.6 used to define mkdir_p. We now use MKDIR_P, -dnl while keeping a definition of mkdir_p for backward compatibility. -dnl @MKDIR_P@ is magic: AC_OUTPUT adjusts its value for each Makefile. -dnl However we cannot define mkdir_p as $(MKDIR_P) for the sake of -dnl Makefile.ins that do not define MKDIR_P, so we do our own -dnl adjustment using top_builddir (which is defined more often than -dnl MKDIR_P). -AC_SUBST([mkdir_p], ["$MKDIR_P"])dnl -case $mkdir_p in - [[\\/$]]* | ?:[[\\/]]*) ;; - */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;; -esac -]) -m4trace:/usr/share/aclocal-1.11/options.m4:13: -1- AC_DEFUN([_AM_MANGLE_OPTION], [[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])]) -m4trace:/usr/share/aclocal-1.11/options.m4:19: -1- AC_DEFUN([_AM_SET_OPTION], [m4_define(_AM_MANGLE_OPTION([$1]), 1)]) -m4trace:/usr/share/aclocal-1.11/options.m4:25: -1- AC_DEFUN([_AM_SET_OPTIONS], [m4_foreach_w([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])]) -m4trace:/usr/share/aclocal-1.11/options.m4:31: -1- AC_DEFUN([_AM_IF_OPTION], [m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])]) -m4trace:/usr/share/aclocal-1.11/runlog.m4:12: -1- AC_DEFUN([AM_RUN_LOG], [{ echo "$as_me:$LINENO: $1" >&AS_MESSAGE_LOG_FD - ($1) >&AS_MESSAGE_LOG_FD 2>&AS_MESSAGE_LOG_FD - ac_status=$? - echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD - (exit $ac_status); }]) -m4trace:/usr/share/aclocal-1.11/sanity.m4:14: -1- AC_DEFUN([AM_SANITY_CHECK], [AC_MSG_CHECKING([whether build environment is sane]) -# Just in case -sleep 1 -echo timestamp > conftest.file -# Reject unsafe characters in $srcdir or the absolute working directory -# name. Accept space and tab only in the latter. -am_lf=' -' -case `pwd` in - *[[\\\"\#\$\&\'\`$am_lf]]*) - AC_MSG_ERROR([unsafe absolute working directory name]);; -esac -case $srcdir in - *[[\\\"\#\$\&\'\`$am_lf\ \ ]]*) - AC_MSG_ERROR([unsafe srcdir value: `$srcdir']);; -esac - -# Do `set' in a subshell so we don't clobber the current shell's -# arguments. Must try -L first in case configure is actually a -# symlink; some systems play weird games with the mod time of symlinks -# (eg FreeBSD returns the mod time of the symlink's containing -# directory). -if ( - set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null` - if test "$[*]" = "X"; then - # -L didn't work. - set X `ls -t "$srcdir/configure" conftest.file` - fi - rm -f conftest.file - if test "$[*]" != "X $srcdir/configure conftest.file" \ - && test "$[*]" != "X conftest.file $srcdir/configure"; then - - # If neither matched, then we have a broken ls. This can happen - # if, for instance, CONFIG_SHELL is bash and it inherits a - # broken ls alias from the environment. This has actually - # happened. Such a system could not be considered "sane". - AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken -alias in your environment]) - fi - - test "$[2]" = conftest.file - ) -then - # Ok. - : -else - AC_MSG_ERROR([newly created file is older than distributed files! -Check your system clock]) -fi -AC_MSG_RESULT(yes)]) -m4trace:/usr/share/aclocal-1.11/silent.m4:14: -1- AC_DEFUN([AM_SILENT_RULES], [AC_ARG_ENABLE([silent-rules], -[ --enable-silent-rules less verbose build output (undo: `make V=1') - --disable-silent-rules verbose build output (undo: `make V=0')]) -case $enable_silent_rules in -yes) AM_DEFAULT_VERBOSITY=0;; -no) AM_DEFAULT_VERBOSITY=1;; -*) AM_DEFAULT_VERBOSITY=m4_if([$1], [yes], [0], [1]);; -esac -AC_SUBST([AM_DEFAULT_VERBOSITY])dnl -AM_BACKSLASH='\' -AC_SUBST([AM_BACKSLASH])dnl -_AM_SUBST_NOTMAKE([AM_BACKSLASH])dnl -]) -m4trace:/usr/share/aclocal-1.11/strip.m4:17: -1- AC_DEFUN([AM_PROG_INSTALL_STRIP], [AC_REQUIRE([AM_PROG_INSTALL_SH])dnl -# Installed binaries are usually stripped using `strip' when the user -# run `make install-strip'. However `strip' might not be the right -# tool to use in cross-compilation environments, therefore Automake -# will honor the `STRIP' environment variable to overrule this program. -dnl Don't test for $cross_compiling = yes, because it might be `maybe'. -if test "$cross_compiling" != no; then - AC_CHECK_TOOL([STRIP], [strip], :) -fi -INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s" -AC_SUBST([INSTALL_STRIP_PROGRAM])]) -m4trace:/usr/share/aclocal-1.11/substnot.m4:14: -1- AC_DEFUN([_AM_SUBST_NOTMAKE]) -m4trace:/usr/share/aclocal-1.11/substnot.m4:19: -1- AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)]) -m4trace:/usr/share/aclocal-1.11/tar.m4:24: -1- AC_DEFUN([_AM_PROG_TAR], [# Always define AMTAR for backward compatibility. -AM_MISSING_PROG([AMTAR], [tar]) -m4_if([$1], [v7], - [am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'], - [m4_case([$1], [ustar],, [pax],, - [m4_fatal([Unknown tar format])]) -AC_MSG_CHECKING([how to create a $1 tar archive]) -# Loop over all known methods to create a tar archive until one works. -_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none' -_am_tools=${am_cv_prog_tar_$1-$_am_tools} -# Do not fold the above two line into one, because Tru64 sh and -# Solaris sh will not grok spaces in the rhs of `-'. -for _am_tool in $_am_tools -do - case $_am_tool in - gnutar) - for _am_tar in tar gnutar gtar; - do - AM_RUN_LOG([$_am_tar --version]) && break - done - am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"' - am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"' - am__untar="$_am_tar -xf -" - ;; - plaintar) - # Must skip GNU tar: if it does not support --format= it doesn't create - # ustar tarball either. - (tar --version) >/dev/null 2>&1 && continue - am__tar='tar chf - "$$tardir"' - am__tar_='tar chf - "$tardir"' - am__untar='tar xf -' - ;; - pax) - am__tar='pax -L -x $1 -w "$$tardir"' - am__tar_='pax -L -x $1 -w "$tardir"' - am__untar='pax -r' - ;; - cpio) - am__tar='find "$$tardir" -print | cpio -o -H $1 -L' - am__tar_='find "$tardir" -print | cpio -o -H $1 -L' - am__untar='cpio -i -H $1 -d' - ;; - none) - am__tar=false - am__tar_=false - am__untar=false - ;; - esac - - # If the value was cached, stop now. We just wanted to have am__tar - # and am__untar set. - test -n "${am_cv_prog_tar_$1}" && break - - # tar/untar a dummy directory, and stop if the command works - rm -rf conftest.dir - mkdir conftest.dir - echo GrepMe > conftest.dir/file - AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar]) - rm -rf conftest.dir - if test -s conftest.tar; then - AM_RUN_LOG([$am__untar /dev/null 2>&1 && break - fi -done -rm -rf conftest.dir - -AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool]) -AC_MSG_RESULT([$am_cv_prog_tar_$1])]) -AC_SUBST([am__tar]) -AC_SUBST([am__untar]) -]) -m4trace:configure.in:4: -1- m4_pattern_forbid([^_?A[CHUM]_]) -m4trace:configure.in:4: -1- m4_pattern_forbid([_AC_]) -m4trace:configure.in:4: -1- m4_pattern_forbid([^LIBOBJS$], [do not use LIBOBJS directly, use AC_LIBOBJ (see section `AC_LIBOBJ vs LIBOBJS']) -m4trace:configure.in:4: -1- m4_pattern_allow([^AS_FLAGS$]) -m4trace:configure.in:4: -1- m4_pattern_forbid([^_?m4_]) -m4trace:configure.in:4: -1- m4_pattern_forbid([^dnl$]) -m4trace:configure.in:4: -1- m4_pattern_forbid([^_?AS_]) -m4trace:configure.in:4: -1- m4_pattern_allow([^SHELL$]) -m4trace:configure.in:4: -1- m4_pattern_allow([^PATH_SEPARATOR$]) -m4trace:configure.in:4: -1- m4_pattern_allow([^PACKAGE_NAME$]) -m4trace:configure.in:4: -1- m4_pattern_allow([^PACKAGE_TARNAME$]) -m4trace:configure.in:4: -1- m4_pattern_allow([^PACKAGE_VERSION$]) -m4trace:configure.in:4: -1- m4_pattern_allow([^PACKAGE_STRING$]) -m4trace:configure.in:4: -1- m4_pattern_allow([^PACKAGE_BUGREPORT$]) -m4trace:configure.in:4: -1- m4_pattern_allow([^PACKAGE_URL$]) -m4trace:configure.in:4: -1- m4_pattern_allow([^exec_prefix$]) -m4trace:configure.in:4: -1- m4_pattern_allow([^prefix$]) -m4trace:configure.in:4: -1- m4_pattern_allow([^program_transform_name$]) -m4trace:configure.in:4: -1- m4_pattern_allow([^bindir$]) -m4trace:configure.in:4: -1- m4_pattern_allow([^sbindir$]) -m4trace:configure.in:4: -1- m4_pattern_allow([^libexecdir$]) -m4trace:configure.in:4: -1- m4_pattern_allow([^datarootdir$]) -m4trace:configure.in:4: -1- m4_pattern_allow([^datadir$]) -m4trace:configure.in:4: -1- m4_pattern_allow([^sysconfdir$]) -m4trace:configure.in:4: -1- m4_pattern_allow([^sharedstatedir$]) -m4trace:configure.in:4: -1- m4_pattern_allow([^localstatedir$]) -m4trace:configure.in:4: -1- m4_pattern_allow([^includedir$]) -m4trace:configure.in:4: -1- m4_pattern_allow([^oldincludedir$]) -m4trace:configure.in:4: -1- m4_pattern_allow([^docdir$]) -m4trace:configure.in:4: -1- m4_pattern_allow([^infodir$]) -m4trace:configure.in:4: -1- m4_pattern_allow([^htmldir$]) -m4trace:configure.in:4: -1- m4_pattern_allow([^dvidir$]) -m4trace:configure.in:4: -1- m4_pattern_allow([^pdfdir$]) -m4trace:configure.in:4: -1- m4_pattern_allow([^psdir$]) -m4trace:configure.in:4: -1- m4_pattern_allow([^libdir$]) -m4trace:configure.in:4: -1- m4_pattern_allow([^localedir$]) -m4trace:configure.in:4: -1- m4_pattern_allow([^mandir$]) -m4trace:configure.in:4: -1- m4_pattern_allow([^PACKAGE_NAME$]) -m4trace:configure.in:4: -1- m4_pattern_allow([^PACKAGE_TARNAME$]) -m4trace:configure.in:4: -1- m4_pattern_allow([^PACKAGE_VERSION$]) -m4trace:configure.in:4: -1- m4_pattern_allow([^PACKAGE_STRING$]) -m4trace:configure.in:4: -1- m4_pattern_allow([^PACKAGE_BUGREPORT$]) -m4trace:configure.in:4: -1- m4_pattern_allow([^PACKAGE_URL$]) -m4trace:configure.in:4: -1- m4_pattern_allow([^DEFS$]) -m4trace:configure.in:4: -1- m4_pattern_allow([^ECHO_C$]) -m4trace:configure.in:4: -1- m4_pattern_allow([^ECHO_N$]) -m4trace:configure.in:4: -1- m4_pattern_allow([^ECHO_T$]) -m4trace:configure.in:4: -1- m4_pattern_allow([^LIBS$]) -m4trace:configure.in:4: -1- m4_pattern_allow([^build_alias$]) -m4trace:configure.in:4: -1- m4_pattern_allow([^host_alias$]) -m4trace:configure.in:4: -1- m4_pattern_allow([^target_alias$]) -m4trace:configure.in:5: -1- AM_INIT_AUTOMAKE([shairport], [1.2.0]) -m4trace:configure.in:5: -1- m4_pattern_allow([^AM_[A-Z]+FLAGS$]) -m4trace:configure.in:5: -1- AM_SET_CURRENT_AUTOMAKE_VERSION -m4trace:configure.in:5: -1- AM_AUTOMAKE_VERSION([1.11.1]) -m4trace:configure.in:5: -1- _AM_AUTOCONF_VERSION([2.68]) -m4trace:configure.in:5: -1- m4_pattern_allow([^INSTALL_PROGRAM$]) -m4trace:configure.in:5: -1- m4_pattern_allow([^INSTALL_SCRIPT$]) -m4trace:configure.in:5: -1- m4_pattern_allow([^INSTALL_DATA$]) -m4trace:configure.in:5: -1- m4_pattern_allow([^am__isrc$]) -m4trace:configure.in:5: -1- _AM_SUBST_NOTMAKE([am__isrc]) -m4trace:configure.in:5: -1- m4_pattern_allow([^CYGPATH_W$]) -m4trace:configure.in:5: -1- m4_pattern_allow([^PACKAGE$]) -m4trace:configure.in:5: -1- m4_pattern_allow([^VERSION$]) -m4trace:configure.in:5: -1- _AM_IF_OPTION([no-define], [], [AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package]) - AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])]) -m4trace:configure.in:5: -2- _AM_MANGLE_OPTION([no-define]) -m4trace:configure.in:5: -1- m4_pattern_allow([^PACKAGE$]) -m4trace:configure.in:5: -1- m4_pattern_allow([^VERSION$]) -m4trace:configure.in:5: -1- AM_SANITY_CHECK -m4trace:configure.in:5: -1- AM_MISSING_PROG([ACLOCAL], [aclocal-${am__api_version}]) -m4trace:configure.in:5: -1- AM_MISSING_HAS_RUN -m4trace:configure.in:5: -1- AM_AUX_DIR_EXPAND -m4trace:configure.in:5: -1- m4_pattern_allow([^ACLOCAL$]) -m4trace:configure.in:5: -1- AM_MISSING_PROG([AUTOCONF], [autoconf]) -m4trace:configure.in:5: -1- m4_pattern_allow([^AUTOCONF$]) -m4trace:configure.in:5: -1- AM_MISSING_PROG([AUTOMAKE], [automake-${am__api_version}]) -m4trace:configure.in:5: -1- m4_pattern_allow([^AUTOMAKE$]) -m4trace:configure.in:5: -1- AM_MISSING_PROG([AUTOHEADER], [autoheader]) -m4trace:configure.in:5: -1- m4_pattern_allow([^AUTOHEADER$]) -m4trace:configure.in:5: -1- AM_MISSING_PROG([MAKEINFO], [makeinfo]) -m4trace:configure.in:5: -1- m4_pattern_allow([^MAKEINFO$]) -m4trace:configure.in:5: -1- AM_PROG_INSTALL_SH -m4trace:configure.in:5: -1- m4_pattern_allow([^install_sh$]) -m4trace:configure.in:5: -1- AM_PROG_INSTALL_STRIP -m4trace:configure.in:5: -1- m4_pattern_allow([^STRIP$]) -m4trace:configure.in:5: -1- m4_pattern_allow([^INSTALL_STRIP_PROGRAM$]) -m4trace:configure.in:5: -1- AM_PROG_MKDIR_P -m4trace:configure.in:5: -1- m4_pattern_allow([^MKDIR_P$]) -m4trace:configure.in:5: -1- m4_pattern_allow([^mkdir_p$]) -m4trace:configure.in:5: -1- m4_pattern_allow([^AWK$]) -m4trace:configure.in:5: -1- m4_pattern_allow([^SET_MAKE$]) -m4trace:configure.in:5: -1- AM_SET_LEADING_DOT -m4trace:configure.in:5: -1- m4_pattern_allow([^am__leading_dot$]) -m4trace:configure.in:5: -1- _AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])], [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])], - [_AM_PROG_TAR([v7])])]) -m4trace:configure.in:5: -2- _AM_MANGLE_OPTION([tar-ustar]) -m4trace:configure.in:5: -1- _AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])], [_AM_PROG_TAR([v7])]) -m4trace:configure.in:5: -2- _AM_MANGLE_OPTION([tar-pax]) -m4trace:configure.in:5: -1- _AM_PROG_TAR([v7]) -m4trace:configure.in:5: -1- AM_MISSING_PROG([AMTAR], [tar]) -m4trace:configure.in:5: -1- m4_pattern_allow([^AMTAR$]) -m4trace:configure.in:5: -1- m4_pattern_allow([^am__tar$]) -m4trace:configure.in:5: -1- m4_pattern_allow([^am__untar$]) -m4trace:configure.in:5: -1- _AM_IF_OPTION([no-dependencies], [], [AC_PROVIDE_IFELSE([AC_PROG_CC], - [_AM_DEPENDENCIES(CC)], - [define([AC_PROG_CC], - defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl -AC_PROVIDE_IFELSE([AC_PROG_CXX], - [_AM_DEPENDENCIES(CXX)], - [define([AC_PROG_CXX], - defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl -AC_PROVIDE_IFELSE([AC_PROG_OBJC], - [_AM_DEPENDENCIES(OBJC)], - [define([AC_PROG_OBJC], - defn([AC_PROG_OBJC])[_AM_DEPENDENCIES(OBJC)])])dnl -]) -m4trace:configure.in:5: -2- _AM_MANGLE_OPTION([no-dependencies]) -m4trace:configure.in:5: -1- _AM_IF_OPTION([silent-rules], [AC_REQUIRE([AM_SILENT_RULES])]) -m4trace:configure.in:5: -2- _AM_MANGLE_OPTION([silent-rules]) -m4trace:configure.in:7: -1- m4_pattern_allow([^CC$]) -m4trace:configure.in:7: -1- m4_pattern_allow([^CFLAGS$]) -m4trace:configure.in:7: -1- m4_pattern_allow([^LDFLAGS$]) -m4trace:configure.in:7: -1- m4_pattern_allow([^LIBS$]) -m4trace:configure.in:7: -1- m4_pattern_allow([^CPPFLAGS$]) -m4trace:configure.in:7: -1- m4_pattern_allow([^CC$]) -m4trace:configure.in:7: -1- m4_pattern_allow([^CC$]) -m4trace:configure.in:7: -1- m4_pattern_allow([^CC$]) -m4trace:configure.in:7: -1- m4_pattern_allow([^CC$]) -m4trace:configure.in:7: -1- m4_pattern_allow([^ac_ct_CC$]) -m4trace:configure.in:7: -1- m4_pattern_allow([^EXEEXT$]) -m4trace:configure.in:7: -1- m4_pattern_allow([^OBJEXT$]) -m4trace:configure.in:7: -1- _AM_DEPENDENCIES([CC]) -m4trace:configure.in:7: -1- AM_SET_DEPDIR -m4trace:configure.in:7: -1- m4_pattern_allow([^DEPDIR$]) -m4trace:configure.in:7: -1- AM_OUTPUT_DEPENDENCY_COMMANDS -m4trace:configure.in:7: -1- AM_MAKE_INCLUDE -m4trace:configure.in:7: -1- m4_pattern_allow([^am__include$]) -m4trace:configure.in:7: -1- m4_pattern_allow([^am__quote$]) -m4trace:configure.in:7: -1- AM_DEP_TRACK -m4trace:configure.in:7: -1- AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno]) -m4trace:configure.in:7: -1- m4_pattern_allow([^AMDEP_TRUE$]) -m4trace:configure.in:7: -1- m4_pattern_allow([^AMDEP_FALSE$]) -m4trace:configure.in:7: -1- _AM_SUBST_NOTMAKE([AMDEP_TRUE]) -m4trace:configure.in:7: -1- _AM_SUBST_NOTMAKE([AMDEP_FALSE]) -m4trace:configure.in:7: -1- m4_pattern_allow([^AMDEPBACKSLASH$]) -m4trace:configure.in:7: -1- _AM_SUBST_NOTMAKE([AMDEPBACKSLASH]) -m4trace:configure.in:7: -1- m4_pattern_allow([^CCDEPMODE$]) -m4trace:configure.in:7: -1- AM_CONDITIONAL([am__fastdepCC], [ - test "x$enable_dependency_tracking" != xno \ - && test "$am_cv_CC_dependencies_compiler_type" = gcc3]) -m4trace:configure.in:7: -1- m4_pattern_allow([^am__fastdepCC_TRUE$]) -m4trace:configure.in:7: -1- m4_pattern_allow([^am__fastdepCC_FALSE$]) -m4trace:configure.in:7: -1- _AM_SUBST_NOTMAKE([am__fastdepCC_TRUE]) -m4trace:configure.in:7: -1- _AM_SUBST_NOTMAKE([am__fastdepCC_FALSE]) -m4trace:configure.in:9: -1- AC_DISABLE_STATIC -m4trace:configure.in:10: -1- AC_PROG_LIBTOOL -m4trace:configure.in:10: -1- _m4_warn([obsolete], [The macro `AC_PROG_LIBTOOL' is obsolete. -You should run autoupdate.], [/usr/share/aclocal/libtool.m4:107: AC_PROG_LIBTOOL is expanded from... -configure.in:10: the top level]) -m4trace:configure.in:10: -1- LT_INIT -m4trace:configure.in:10: -1- m4_pattern_forbid([^_?LT_[A-Z_]+$]) -m4trace:configure.in:10: -1- m4_pattern_allow([^(_LT_EOF|LT_DLGLOBAL|LT_DLLAZY_OR_NOW|LT_MULTI_MODULE)$]) -m4trace:configure.in:10: -1- LTOPTIONS_VERSION -m4trace:configure.in:10: -1- LTSUGAR_VERSION -m4trace:configure.in:10: -1- LTVERSION_VERSION -m4trace:configure.in:10: -1- LTOBSOLETE_VERSION -m4trace:configure.in:10: -1- _LT_PROG_LTMAIN -m4trace:configure.in:10: -1- m4_pattern_allow([^LIBTOOL$]) -m4trace:configure.in:10: -1- m4_pattern_allow([^build$]) -m4trace:configure.in:10: -1- m4_pattern_allow([^build_cpu$]) -m4trace:configure.in:10: -1- m4_pattern_allow([^build_vendor$]) -m4trace:configure.in:10: -1- m4_pattern_allow([^build_os$]) -m4trace:configure.in:10: -1- m4_pattern_allow([^host$]) -m4trace:configure.in:10: -1- m4_pattern_allow([^host_cpu$]) -m4trace:configure.in:10: -1- m4_pattern_allow([^host_vendor$]) -m4trace:configure.in:10: -1- m4_pattern_allow([^host_os$]) -m4trace:configure.in:10: -1- _LT_PREPARE_SED_QUOTE_VARS -m4trace:configure.in:10: -1- _LT_PROG_ECHO_BACKSLASH -m4trace:configure.in:10: -1- LT_PATH_LD -m4trace:configure.in:10: -1- m4_pattern_allow([^SED$]) -m4trace:configure.in:10: -1- AC_PROG_EGREP -m4trace:configure.in:10: -1- m4_pattern_allow([^GREP$]) -m4trace:configure.in:10: -1- m4_pattern_allow([^EGREP$]) -m4trace:configure.in:10: -1- m4_pattern_allow([^FGREP$]) -m4trace:configure.in:10: -1- m4_pattern_allow([^GREP$]) -m4trace:configure.in:10: -1- m4_pattern_allow([^LD$]) -m4trace:configure.in:10: -1- LT_PATH_NM -m4trace:configure.in:10: -1- m4_pattern_allow([^DUMPBIN$]) -m4trace:configure.in:10: -1- m4_pattern_allow([^ac_ct_DUMPBIN$]) -m4trace:configure.in:10: -1- m4_pattern_allow([^DUMPBIN$]) -m4trace:configure.in:10: -1- m4_pattern_allow([^NM$]) -m4trace:configure.in:10: -1- m4_pattern_allow([^LN_S$]) -m4trace:configure.in:10: -1- LT_CMD_MAX_LEN -m4trace:configure.in:10: -1- m4_pattern_allow([^OBJDUMP$]) -m4trace:configure.in:10: -1- m4_pattern_allow([^OBJDUMP$]) -m4trace:configure.in:10: -1- m4_pattern_allow([^DLLTOOL$]) -m4trace:configure.in:10: -1- m4_pattern_allow([^DLLTOOL$]) -m4trace:configure.in:10: -1- m4_pattern_allow([^AR$]) -m4trace:configure.in:10: -1- m4_pattern_allow([^ac_ct_AR$]) -m4trace:configure.in:10: -1- m4_pattern_allow([^STRIP$]) -m4trace:configure.in:10: -1- m4_pattern_allow([^RANLIB$]) -m4trace:configure.in:10: -1- _LT_WITH_SYSROOT -m4trace:configure.in:10: -1- m4_pattern_allow([LT_OBJDIR]) -m4trace:configure.in:10: -1- m4_pattern_allow([^LT_OBJDIR$]) -m4trace:configure.in:10: -1- _LT_CC_BASENAME([$compiler]) -m4trace:configure.in:10: -1- _LT_PATH_TOOL_PREFIX([${ac_tool_prefix}file], [/usr/bin$PATH_SEPARATOR$PATH]) -m4trace:configure.in:10: -1- _LT_PATH_TOOL_PREFIX([file], [/usr/bin$PATH_SEPARATOR$PATH]) -m4trace:configure.in:10: -1- LT_SUPPORTED_TAG([CC]) -m4trace:configure.in:10: -1- _LT_COMPILER_BOILERPLATE -m4trace:configure.in:10: -1- _LT_LINKER_BOILERPLATE -m4trace:configure.in:10: -1- _LT_COMPILER_OPTION([if $compiler supports -fno-rtti -fno-exceptions], [lt_cv_prog_compiler_rtti_exceptions], [-fno-rtti -fno-exceptions], [], [_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, )="$_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, ) -fno-rtti -fno-exceptions"]) -m4trace:configure.in:10: -1- _LT_COMPILER_OPTION([if $compiler PIC flag $_LT_TAGVAR(lt_prog_compiler_pic, ) works], [_LT_TAGVAR(lt_cv_prog_compiler_pic_works, )], [$_LT_TAGVAR(lt_prog_compiler_pic, )@&t@m4_if([],[],[ -DPIC],[m4_if([],[CXX],[ -DPIC],[])])], [], [case $_LT_TAGVAR(lt_prog_compiler_pic, ) in - "" | " "*) ;; - *) _LT_TAGVAR(lt_prog_compiler_pic, )=" $_LT_TAGVAR(lt_prog_compiler_pic, )" ;; - esac], [_LT_TAGVAR(lt_prog_compiler_pic, )= - _LT_TAGVAR(lt_prog_compiler_can_build_shared, )=no]) -m4trace:configure.in:10: -1- _LT_LINKER_OPTION([if $compiler static flag $lt_tmp_static_flag works], [lt_cv_prog_compiler_static_works], [$lt_tmp_static_flag], [], [_LT_TAGVAR(lt_prog_compiler_static, )=]) -m4trace:configure.in:10: -1- m4_pattern_allow([^MANIFEST_TOOL$]) -m4trace:configure.in:10: -1- _LT_REQUIRED_DARWIN_CHECKS -m4trace:configure.in:10: -1- m4_pattern_allow([^DSYMUTIL$]) -m4trace:configure.in:10: -1- m4_pattern_allow([^NMEDIT$]) -m4trace:configure.in:10: -1- m4_pattern_allow([^LIPO$]) -m4trace:configure.in:10: -1- m4_pattern_allow([^OTOOL$]) -m4trace:configure.in:10: -1- m4_pattern_allow([^OTOOL64$]) -m4trace:configure.in:10: -1- _LT_LINKER_OPTION([if $CC understands -b], [lt_cv_prog_compiler__b], [-b], [_LT_TAGVAR(archive_cmds, )='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'], [_LT_TAGVAR(archive_cmds, )='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags']) -m4trace:configure.in:10: -1- LT_SYS_DLOPEN_SELF -m4trace:configure.in:10: -1- m4_pattern_allow([^CPP$]) -m4trace:configure.in:10: -1- m4_pattern_allow([^CPPFLAGS$]) -m4trace:configure.in:10: -1- m4_pattern_allow([^CPP$]) -m4trace:configure.in:10: -1- m4_pattern_allow([^STDC_HEADERS$]) -m4trace:configure.in:10: -1- m4_pattern_allow([^HAVE_DLFCN_H$]) -m4trace:configure.in:15: -1- m4_pattern_allow([^HAVE_LIBSSL$]) -m4trace:configure.in:16: -1- m4_pattern_allow([^HAVE_LIBPTHREAD$]) -m4trace:configure.in:23: -1- _m4_warn([obsolete], [AC_OUTPUT should be used without arguments. -You should run autoupdate.], []) -m4trace:configure.in:23: -1- m4_pattern_allow([^LIB@&t@OBJS$]) -m4trace:configure.in:23: -1- m4_pattern_allow([^LTLIBOBJS$]) -m4trace:configure.in:23: -1- AM_CONDITIONAL([am__EXEEXT], [test -n "$EXEEXT"]) -m4trace:configure.in:23: -1- m4_pattern_allow([^am__EXEEXT_TRUE$]) -m4trace:configure.in:23: -1- m4_pattern_allow([^am__EXEEXT_FALSE$]) -m4trace:configure.in:23: -1- _AM_SUBST_NOTMAKE([am__EXEEXT_TRUE]) -m4trace:configure.in:23: -1- _AM_SUBST_NOTMAKE([am__EXEEXT_FALSE]) -m4trace:configure.in:23: -1- _AC_AM_CONFIG_HEADER_HOOK(["$ac_file"]) -m4trace:configure.in:23: -1- _AM_OUTPUT_DEPENDENCY_COMMANDS -m4trace:configure.in:23: -1- _LT_PROG_LTMAIN -m4trace:configure.in:24: -1- m4_pattern_allow([^LIB@&t@OBJS$]) -m4trace:configure.in:24: -1- m4_pattern_allow([^LTLIBOBJS$]) -m4trace:configure.in:24: -1- AM_CONDITIONAL([am__EXEEXT], [test -n "$EXEEXT"]) -m4trace:configure.in:24: -1- m4_pattern_allow([^am__EXEEXT_TRUE$]) -m4trace:configure.in:24: -1- m4_pattern_allow([^am__EXEEXT_FALSE$]) -m4trace:configure.in:24: -1- _AM_SUBST_NOTMAKE([am__EXEEXT_TRUE]) -m4trace:configure.in:24: -1- _AM_SUBST_NOTMAKE([am__EXEEXT_FALSE]) -m4trace:configure.in:24: -1- _AC_AM_CONFIG_HEADER_HOOK(["$ac_file"]) -m4trace:configure.in:24: -1- _AM_OUTPUT_DEPENDENCY_COMMANDS -m4trace:configure.in:24: -1- _LT_PROG_LTMAIN diff -Nru libshairport-1.2.0.20310.1/autom4te.cache/traces.1 libshairport-1.2.1~git20120110.aeb4987/autom4te.cache/traces.1 --- libshairport-1.2.0.20310.1/autom4te.cache/traces.1 2011-11-10 19:35:56.000000000 +0000 +++ libshairport-1.2.1~git20120110.aeb4987/autom4te.cache/traces.1 1970-01-01 00:00:00.000000000 +0000 @@ -1,527 +0,0 @@ -m4trace:configure.in:4: -1- AC_INIT([shairport.c], [1.2.0], [http://trac.xbmc.org]) -m4trace:configure.in:4: -1- m4_pattern_forbid([^_?A[CHUM]_]) -m4trace:configure.in:4: -1- m4_pattern_forbid([_AC_]) -m4trace:configure.in:4: -1- m4_pattern_forbid([^LIBOBJS$], [do not use LIBOBJS directly, use AC_LIBOBJ (see section `AC_LIBOBJ vs LIBOBJS']) -m4trace:configure.in:4: -1- m4_pattern_allow([^AS_FLAGS$]) -m4trace:configure.in:4: -1- m4_pattern_forbid([^_?m4_]) -m4trace:configure.in:4: -1- m4_pattern_forbid([^dnl$]) -m4trace:configure.in:4: -1- m4_pattern_forbid([^_?AS_]) -m4trace:configure.in:4: -1- AC_SUBST([SHELL]) -m4trace:configure.in:4: -1- AC_SUBST_TRACE([SHELL]) -m4trace:configure.in:4: -1- m4_pattern_allow([^SHELL$]) -m4trace:configure.in:4: -1- AC_SUBST([PATH_SEPARATOR]) -m4trace:configure.in:4: -1- AC_SUBST_TRACE([PATH_SEPARATOR]) -m4trace:configure.in:4: -1- m4_pattern_allow([^PATH_SEPARATOR$]) -m4trace:configure.in:4: -1- AC_SUBST([PACKAGE_NAME], [m4_ifdef([AC_PACKAGE_NAME], ['AC_PACKAGE_NAME'])]) -m4trace:configure.in:4: -1- AC_SUBST_TRACE([PACKAGE_NAME]) -m4trace:configure.in:4: -1- m4_pattern_allow([^PACKAGE_NAME$]) -m4trace:configure.in:4: -1- AC_SUBST([PACKAGE_TARNAME], [m4_ifdef([AC_PACKAGE_TARNAME], ['AC_PACKAGE_TARNAME'])]) -m4trace:configure.in:4: -1- AC_SUBST_TRACE([PACKAGE_TARNAME]) -m4trace:configure.in:4: -1- m4_pattern_allow([^PACKAGE_TARNAME$]) -m4trace:configure.in:4: -1- AC_SUBST([PACKAGE_VERSION], [m4_ifdef([AC_PACKAGE_VERSION], ['AC_PACKAGE_VERSION'])]) -m4trace:configure.in:4: -1- AC_SUBST_TRACE([PACKAGE_VERSION]) -m4trace:configure.in:4: -1- m4_pattern_allow([^PACKAGE_VERSION$]) -m4trace:configure.in:4: -1- AC_SUBST([PACKAGE_STRING], [m4_ifdef([AC_PACKAGE_STRING], ['AC_PACKAGE_STRING'])]) -m4trace:configure.in:4: -1- AC_SUBST_TRACE([PACKAGE_STRING]) -m4trace:configure.in:4: -1- m4_pattern_allow([^PACKAGE_STRING$]) -m4trace:configure.in:4: -1- AC_SUBST([PACKAGE_BUGREPORT], [m4_ifdef([AC_PACKAGE_BUGREPORT], ['AC_PACKAGE_BUGREPORT'])]) -m4trace:configure.in:4: -1- AC_SUBST_TRACE([PACKAGE_BUGREPORT]) -m4trace:configure.in:4: -1- m4_pattern_allow([^PACKAGE_BUGREPORT$]) -m4trace:configure.in:4: -1- AC_SUBST([PACKAGE_URL], [m4_ifdef([AC_PACKAGE_URL], ['AC_PACKAGE_URL'])]) -m4trace:configure.in:4: -1- AC_SUBST_TRACE([PACKAGE_URL]) -m4trace:configure.in:4: -1- m4_pattern_allow([^PACKAGE_URL$]) -m4trace:configure.in:4: -1- AC_SUBST([exec_prefix], [NONE]) -m4trace:configure.in:4: -1- AC_SUBST_TRACE([exec_prefix]) -m4trace:configure.in:4: -1- m4_pattern_allow([^exec_prefix$]) -m4trace:configure.in:4: -1- AC_SUBST([prefix], [NONE]) -m4trace:configure.in:4: -1- AC_SUBST_TRACE([prefix]) -m4trace:configure.in:4: -1- m4_pattern_allow([^prefix$]) -m4trace:configure.in:4: -1- AC_SUBST([program_transform_name], [s,x,x,]) -m4trace:configure.in:4: -1- AC_SUBST_TRACE([program_transform_name]) -m4trace:configure.in:4: -1- m4_pattern_allow([^program_transform_name$]) -m4trace:configure.in:4: -1- AC_SUBST([bindir], ['${exec_prefix}/bin']) -m4trace:configure.in:4: -1- AC_SUBST_TRACE([bindir]) -m4trace:configure.in:4: -1- m4_pattern_allow([^bindir$]) -m4trace:configure.in:4: -1- AC_SUBST([sbindir], ['${exec_prefix}/sbin']) -m4trace:configure.in:4: -1- AC_SUBST_TRACE([sbindir]) -m4trace:configure.in:4: -1- m4_pattern_allow([^sbindir$]) -m4trace:configure.in:4: -1- AC_SUBST([libexecdir], ['${exec_prefix}/libexec']) -m4trace:configure.in:4: -1- AC_SUBST_TRACE([libexecdir]) -m4trace:configure.in:4: -1- m4_pattern_allow([^libexecdir$]) -m4trace:configure.in:4: -1- AC_SUBST([datarootdir], ['${prefix}/share']) -m4trace:configure.in:4: -1- AC_SUBST_TRACE([datarootdir]) -m4trace:configure.in:4: -1- m4_pattern_allow([^datarootdir$]) -m4trace:configure.in:4: -1- AC_SUBST([datadir], ['${datarootdir}']) -m4trace:configure.in:4: -1- AC_SUBST_TRACE([datadir]) -m4trace:configure.in:4: -1- m4_pattern_allow([^datadir$]) -m4trace:configure.in:4: -1- AC_SUBST([sysconfdir], ['${prefix}/etc']) -m4trace:configure.in:4: -1- AC_SUBST_TRACE([sysconfdir]) -m4trace:configure.in:4: -1- m4_pattern_allow([^sysconfdir$]) -m4trace:configure.in:4: -1- AC_SUBST([sharedstatedir], ['${prefix}/com']) -m4trace:configure.in:4: -1- AC_SUBST_TRACE([sharedstatedir]) -m4trace:configure.in:4: -1- m4_pattern_allow([^sharedstatedir$]) -m4trace:configure.in:4: -1- AC_SUBST([localstatedir], ['${prefix}/var']) -m4trace:configure.in:4: -1- AC_SUBST_TRACE([localstatedir]) -m4trace:configure.in:4: -1- m4_pattern_allow([^localstatedir$]) -m4trace:configure.in:4: -1- AC_SUBST([includedir], ['${prefix}/include']) -m4trace:configure.in:4: -1- AC_SUBST_TRACE([includedir]) -m4trace:configure.in:4: -1- m4_pattern_allow([^includedir$]) -m4trace:configure.in:4: -1- AC_SUBST([oldincludedir], ['/usr/include']) -m4trace:configure.in:4: -1- AC_SUBST_TRACE([oldincludedir]) -m4trace:configure.in:4: -1- m4_pattern_allow([^oldincludedir$]) -m4trace:configure.in:4: -1- AC_SUBST([docdir], [m4_ifset([AC_PACKAGE_TARNAME], - ['${datarootdir}/doc/${PACKAGE_TARNAME}'], - ['${datarootdir}/doc/${PACKAGE}'])]) -m4trace:configure.in:4: -1- AC_SUBST_TRACE([docdir]) -m4trace:configure.in:4: -1- m4_pattern_allow([^docdir$]) -m4trace:configure.in:4: -1- AC_SUBST([infodir], ['${datarootdir}/info']) -m4trace:configure.in:4: -1- AC_SUBST_TRACE([infodir]) -m4trace:configure.in:4: -1- m4_pattern_allow([^infodir$]) -m4trace:configure.in:4: -1- AC_SUBST([htmldir], ['${docdir}']) -m4trace:configure.in:4: -1- AC_SUBST_TRACE([htmldir]) -m4trace:configure.in:4: -1- m4_pattern_allow([^htmldir$]) -m4trace:configure.in:4: -1- AC_SUBST([dvidir], ['${docdir}']) -m4trace:configure.in:4: -1- AC_SUBST_TRACE([dvidir]) -m4trace:configure.in:4: -1- m4_pattern_allow([^dvidir$]) -m4trace:configure.in:4: -1- AC_SUBST([pdfdir], ['${docdir}']) -m4trace:configure.in:4: -1- AC_SUBST_TRACE([pdfdir]) -m4trace:configure.in:4: -1- m4_pattern_allow([^pdfdir$]) -m4trace:configure.in:4: -1- AC_SUBST([psdir], ['${docdir}']) -m4trace:configure.in:4: -1- AC_SUBST_TRACE([psdir]) -m4trace:configure.in:4: -1- m4_pattern_allow([^psdir$]) -m4trace:configure.in:4: -1- AC_SUBST([libdir], ['${exec_prefix}/lib']) -m4trace:configure.in:4: -1- AC_SUBST_TRACE([libdir]) -m4trace:configure.in:4: -1- m4_pattern_allow([^libdir$]) -m4trace:configure.in:4: -1- AC_SUBST([localedir], ['${datarootdir}/locale']) -m4trace:configure.in:4: -1- AC_SUBST_TRACE([localedir]) -m4trace:configure.in:4: -1- m4_pattern_allow([^localedir$]) -m4trace:configure.in:4: -1- AC_SUBST([mandir], ['${datarootdir}/man']) -m4trace:configure.in:4: -1- AC_SUBST_TRACE([mandir]) -m4trace:configure.in:4: -1- m4_pattern_allow([^mandir$]) -m4trace:configure.in:4: -1- AC_DEFINE_TRACE_LITERAL([PACKAGE_NAME]) -m4trace:configure.in:4: -1- m4_pattern_allow([^PACKAGE_NAME$]) -m4trace:configure.in:4: -1- AH_OUTPUT([PACKAGE_NAME], [/* Define to the full name of this package. */ -@%:@undef PACKAGE_NAME]) -m4trace:configure.in:4: -1- AC_DEFINE_TRACE_LITERAL([PACKAGE_TARNAME]) -m4trace:configure.in:4: -1- m4_pattern_allow([^PACKAGE_TARNAME$]) -m4trace:configure.in:4: -1- AH_OUTPUT([PACKAGE_TARNAME], [/* Define to the one symbol short name of this package. */ -@%:@undef PACKAGE_TARNAME]) -m4trace:configure.in:4: -1- AC_DEFINE_TRACE_LITERAL([PACKAGE_VERSION]) -m4trace:configure.in:4: -1- m4_pattern_allow([^PACKAGE_VERSION$]) -m4trace:configure.in:4: -1- AH_OUTPUT([PACKAGE_VERSION], [/* Define to the version of this package. */ -@%:@undef PACKAGE_VERSION]) -m4trace:configure.in:4: -1- AC_DEFINE_TRACE_LITERAL([PACKAGE_STRING]) -m4trace:configure.in:4: -1- m4_pattern_allow([^PACKAGE_STRING$]) -m4trace:configure.in:4: -1- AH_OUTPUT([PACKAGE_STRING], [/* Define to the full name and version of this package. */ -@%:@undef PACKAGE_STRING]) -m4trace:configure.in:4: -1- AC_DEFINE_TRACE_LITERAL([PACKAGE_BUGREPORT]) -m4trace:configure.in:4: -1- m4_pattern_allow([^PACKAGE_BUGREPORT$]) -m4trace:configure.in:4: -1- AH_OUTPUT([PACKAGE_BUGREPORT], [/* Define to the address where bug reports for this package should be sent. */ -@%:@undef PACKAGE_BUGREPORT]) -m4trace:configure.in:4: -1- AC_DEFINE_TRACE_LITERAL([PACKAGE_URL]) -m4trace:configure.in:4: -1- m4_pattern_allow([^PACKAGE_URL$]) -m4trace:configure.in:4: -1- AH_OUTPUT([PACKAGE_URL], [/* Define to the home page for this package. */ -@%:@undef PACKAGE_URL]) -m4trace:configure.in:4: -1- AC_SUBST([DEFS]) -m4trace:configure.in:4: -1- AC_SUBST_TRACE([DEFS]) -m4trace:configure.in:4: -1- m4_pattern_allow([^DEFS$]) -m4trace:configure.in:4: -1- AC_SUBST([ECHO_C]) -m4trace:configure.in:4: -1- AC_SUBST_TRACE([ECHO_C]) -m4trace:configure.in:4: -1- m4_pattern_allow([^ECHO_C$]) -m4trace:configure.in:4: -1- AC_SUBST([ECHO_N]) -m4trace:configure.in:4: -1- AC_SUBST_TRACE([ECHO_N]) -m4trace:configure.in:4: -1- m4_pattern_allow([^ECHO_N$]) -m4trace:configure.in:4: -1- AC_SUBST([ECHO_T]) -m4trace:configure.in:4: -1- AC_SUBST_TRACE([ECHO_T]) -m4trace:configure.in:4: -1- m4_pattern_allow([^ECHO_T$]) -m4trace:configure.in:4: -1- AC_SUBST([LIBS]) -m4trace:configure.in:4: -1- AC_SUBST_TRACE([LIBS]) -m4trace:configure.in:4: -1- m4_pattern_allow([^LIBS$]) -m4trace:configure.in:4: -1- AC_SUBST([build_alias]) -m4trace:configure.in:4: -1- AC_SUBST_TRACE([build_alias]) -m4trace:configure.in:4: -1- m4_pattern_allow([^build_alias$]) -m4trace:configure.in:4: -1- AC_SUBST([host_alias]) -m4trace:configure.in:4: -1- AC_SUBST_TRACE([host_alias]) -m4trace:configure.in:4: -1- m4_pattern_allow([^host_alias$]) -m4trace:configure.in:4: -1- AC_SUBST([target_alias]) -m4trace:configure.in:4: -1- AC_SUBST_TRACE([target_alias]) -m4trace:configure.in:4: -1- m4_pattern_allow([^target_alias$]) -m4trace:configure.in:5: -1- AM_INIT_AUTOMAKE([shairport], [1.2.0]) -m4trace:configure.in:5: -1- m4_pattern_allow([^AM_[A-Z]+FLAGS$]) -m4trace:configure.in:5: -1- AM_AUTOMAKE_VERSION([1.11.1]) -m4trace:configure.in:5: -1- AC_REQUIRE_AUX_FILE([install-sh]) -m4trace:configure.in:5: -1- AC_SUBST([INSTALL_PROGRAM]) -m4trace:configure.in:5: -1- AC_SUBST_TRACE([INSTALL_PROGRAM]) -m4trace:configure.in:5: -1- m4_pattern_allow([^INSTALL_PROGRAM$]) -m4trace:configure.in:5: -1- AC_SUBST([INSTALL_SCRIPT]) -m4trace:configure.in:5: -1- AC_SUBST_TRACE([INSTALL_SCRIPT]) -m4trace:configure.in:5: -1- m4_pattern_allow([^INSTALL_SCRIPT$]) -m4trace:configure.in:5: -1- AC_SUBST([INSTALL_DATA]) -m4trace:configure.in:5: -1- AC_SUBST_TRACE([INSTALL_DATA]) -m4trace:configure.in:5: -1- m4_pattern_allow([^INSTALL_DATA$]) -m4trace:configure.in:5: -1- AC_SUBST([am__isrc], [' -I$(srcdir)']) -m4trace:configure.in:5: -1- AC_SUBST_TRACE([am__isrc]) -m4trace:configure.in:5: -1- m4_pattern_allow([^am__isrc$]) -m4trace:configure.in:5: -1- _AM_SUBST_NOTMAKE([am__isrc]) -m4trace:configure.in:5: -1- AC_SUBST([CYGPATH_W]) -m4trace:configure.in:5: -1- AC_SUBST_TRACE([CYGPATH_W]) -m4trace:configure.in:5: -1- m4_pattern_allow([^CYGPATH_W$]) -m4trace:configure.in:5: -1- AC_SUBST([PACKAGE], [shairport]) -m4trace:configure.in:5: -1- AC_SUBST_TRACE([PACKAGE]) -m4trace:configure.in:5: -1- m4_pattern_allow([^PACKAGE$]) -m4trace:configure.in:5: -1- AC_SUBST([VERSION], [1.2.0]) -m4trace:configure.in:5: -1- AC_SUBST_TRACE([VERSION]) -m4trace:configure.in:5: -1- m4_pattern_allow([^VERSION$]) -m4trace:configure.in:5: -1- AC_DEFINE_TRACE_LITERAL([PACKAGE]) -m4trace:configure.in:5: -1- m4_pattern_allow([^PACKAGE$]) -m4trace:configure.in:5: -1- AH_OUTPUT([PACKAGE], [/* Name of package */ -@%:@undef PACKAGE]) -m4trace:configure.in:5: -1- AC_DEFINE_TRACE_LITERAL([VERSION]) -m4trace:configure.in:5: -1- m4_pattern_allow([^VERSION$]) -m4trace:configure.in:5: -1- AH_OUTPUT([VERSION], [/* Version number of package */ -@%:@undef VERSION]) -m4trace:configure.in:5: -1- AC_REQUIRE_AUX_FILE([missing]) -m4trace:configure.in:5: -1- AC_SUBST([ACLOCAL]) -m4trace:configure.in:5: -1- AC_SUBST_TRACE([ACLOCAL]) -m4trace:configure.in:5: -1- m4_pattern_allow([^ACLOCAL$]) -m4trace:configure.in:5: -1- AC_SUBST([AUTOCONF]) -m4trace:configure.in:5: -1- AC_SUBST_TRACE([AUTOCONF]) -m4trace:configure.in:5: -1- m4_pattern_allow([^AUTOCONF$]) -m4trace:configure.in:5: -1- AC_SUBST([AUTOMAKE]) -m4trace:configure.in:5: -1- AC_SUBST_TRACE([AUTOMAKE]) -m4trace:configure.in:5: -1- m4_pattern_allow([^AUTOMAKE$]) -m4trace:configure.in:5: -1- AC_SUBST([AUTOHEADER]) -m4trace:configure.in:5: -1- AC_SUBST_TRACE([AUTOHEADER]) -m4trace:configure.in:5: -1- m4_pattern_allow([^AUTOHEADER$]) -m4trace:configure.in:5: -1- AC_SUBST([MAKEINFO]) -m4trace:configure.in:5: -1- AC_SUBST_TRACE([MAKEINFO]) -m4trace:configure.in:5: -1- m4_pattern_allow([^MAKEINFO$]) -m4trace:configure.in:5: -1- AC_SUBST([install_sh]) -m4trace:configure.in:5: -1- AC_SUBST_TRACE([install_sh]) -m4trace:configure.in:5: -1- m4_pattern_allow([^install_sh$]) -m4trace:configure.in:5: -1- AC_SUBST([STRIP]) -m4trace:configure.in:5: -1- AC_SUBST_TRACE([STRIP]) -m4trace:configure.in:5: -1- m4_pattern_allow([^STRIP$]) -m4trace:configure.in:5: -1- AC_SUBST([INSTALL_STRIP_PROGRAM]) -m4trace:configure.in:5: -1- AC_SUBST_TRACE([INSTALL_STRIP_PROGRAM]) -m4trace:configure.in:5: -1- m4_pattern_allow([^INSTALL_STRIP_PROGRAM$]) -m4trace:configure.in:5: -1- AC_REQUIRE_AUX_FILE([install-sh]) -m4trace:configure.in:5: -1- AC_SUBST([MKDIR_P]) -m4trace:configure.in:5: -1- AC_SUBST_TRACE([MKDIR_P]) -m4trace:configure.in:5: -1- m4_pattern_allow([^MKDIR_P$]) -m4trace:configure.in:5: -1- AC_SUBST([mkdir_p], ["$MKDIR_P"]) -m4trace:configure.in:5: -1- AC_SUBST_TRACE([mkdir_p]) -m4trace:configure.in:5: -1- m4_pattern_allow([^mkdir_p$]) -m4trace:configure.in:5: -1- AC_SUBST([AWK]) -m4trace:configure.in:5: -1- AC_SUBST_TRACE([AWK]) -m4trace:configure.in:5: -1- m4_pattern_allow([^AWK$]) -m4trace:configure.in:5: -1- AC_SUBST([SET_MAKE]) -m4trace:configure.in:5: -1- AC_SUBST_TRACE([SET_MAKE]) -m4trace:configure.in:5: -1- m4_pattern_allow([^SET_MAKE$]) -m4trace:configure.in:5: -1- AC_SUBST([am__leading_dot]) -m4trace:configure.in:5: -1- AC_SUBST_TRACE([am__leading_dot]) -m4trace:configure.in:5: -1- m4_pattern_allow([^am__leading_dot$]) -m4trace:configure.in:5: -1- AC_SUBST([AMTAR]) -m4trace:configure.in:5: -1- AC_SUBST_TRACE([AMTAR]) -m4trace:configure.in:5: -1- m4_pattern_allow([^AMTAR$]) -m4trace:configure.in:5: -1- AC_SUBST([am__tar]) -m4trace:configure.in:5: -1- AC_SUBST_TRACE([am__tar]) -m4trace:configure.in:5: -1- m4_pattern_allow([^am__tar$]) -m4trace:configure.in:5: -1- AC_SUBST([am__untar]) -m4trace:configure.in:5: -1- AC_SUBST_TRACE([am__untar]) -m4trace:configure.in:5: -1- m4_pattern_allow([^am__untar$]) -m4trace:configure.in:6: -1- AC_CONFIG_HEADERS([config.h]) -m4trace:configure.in:7: -1- AC_SUBST([CC]) -m4trace:configure.in:7: -1- AC_SUBST_TRACE([CC]) -m4trace:configure.in:7: -1- m4_pattern_allow([^CC$]) -m4trace:configure.in:7: -1- AC_SUBST([CFLAGS]) -m4trace:configure.in:7: -1- AC_SUBST_TRACE([CFLAGS]) -m4trace:configure.in:7: -1- m4_pattern_allow([^CFLAGS$]) -m4trace:configure.in:7: -1- AC_SUBST([LDFLAGS]) -m4trace:configure.in:7: -1- AC_SUBST_TRACE([LDFLAGS]) -m4trace:configure.in:7: -1- m4_pattern_allow([^LDFLAGS$]) -m4trace:configure.in:7: -1- AC_SUBST([LIBS]) -m4trace:configure.in:7: -1- AC_SUBST_TRACE([LIBS]) -m4trace:configure.in:7: -1- m4_pattern_allow([^LIBS$]) -m4trace:configure.in:7: -1- AC_SUBST([CPPFLAGS]) -m4trace:configure.in:7: -1- AC_SUBST_TRACE([CPPFLAGS]) -m4trace:configure.in:7: -1- m4_pattern_allow([^CPPFLAGS$]) -m4trace:configure.in:7: -1- AC_SUBST([CC]) -m4trace:configure.in:7: -1- AC_SUBST_TRACE([CC]) -m4trace:configure.in:7: -1- m4_pattern_allow([^CC$]) -m4trace:configure.in:7: -1- AC_SUBST([CC]) -m4trace:configure.in:7: -1- AC_SUBST_TRACE([CC]) -m4trace:configure.in:7: -1- m4_pattern_allow([^CC$]) -m4trace:configure.in:7: -1- AC_SUBST([CC]) -m4trace:configure.in:7: -1- AC_SUBST_TRACE([CC]) -m4trace:configure.in:7: -1- m4_pattern_allow([^CC$]) -m4trace:configure.in:7: -1- AC_SUBST([CC]) -m4trace:configure.in:7: -1- AC_SUBST_TRACE([CC]) -m4trace:configure.in:7: -1- m4_pattern_allow([^CC$]) -m4trace:configure.in:7: -1- AC_SUBST([ac_ct_CC]) -m4trace:configure.in:7: -1- AC_SUBST_TRACE([ac_ct_CC]) -m4trace:configure.in:7: -1- m4_pattern_allow([^ac_ct_CC$]) -m4trace:configure.in:7: -1- AC_SUBST([EXEEXT], [$ac_cv_exeext]) -m4trace:configure.in:7: -1- AC_SUBST_TRACE([EXEEXT]) -m4trace:configure.in:7: -1- m4_pattern_allow([^EXEEXT$]) -m4trace:configure.in:7: -1- AC_SUBST([OBJEXT], [$ac_cv_objext]) -m4trace:configure.in:7: -1- AC_SUBST_TRACE([OBJEXT]) -m4trace:configure.in:7: -1- m4_pattern_allow([^OBJEXT$]) -m4trace:configure.in:7: -1- AC_SUBST([DEPDIR], ["${am__leading_dot}deps"]) -m4trace:configure.in:7: -1- AC_SUBST_TRACE([DEPDIR]) -m4trace:configure.in:7: -1- m4_pattern_allow([^DEPDIR$]) -m4trace:configure.in:7: -1- AC_SUBST([am__include]) -m4trace:configure.in:7: -1- AC_SUBST_TRACE([am__include]) -m4trace:configure.in:7: -1- m4_pattern_allow([^am__include$]) -m4trace:configure.in:7: -1- AC_SUBST([am__quote]) -m4trace:configure.in:7: -1- AC_SUBST_TRACE([am__quote]) -m4trace:configure.in:7: -1- m4_pattern_allow([^am__quote$]) -m4trace:configure.in:7: -1- AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno]) -m4trace:configure.in:7: -1- AC_SUBST([AMDEP_TRUE]) -m4trace:configure.in:7: -1- AC_SUBST_TRACE([AMDEP_TRUE]) -m4trace:configure.in:7: -1- m4_pattern_allow([^AMDEP_TRUE$]) -m4trace:configure.in:7: -1- AC_SUBST([AMDEP_FALSE]) -m4trace:configure.in:7: -1- AC_SUBST_TRACE([AMDEP_FALSE]) -m4trace:configure.in:7: -1- m4_pattern_allow([^AMDEP_FALSE$]) -m4trace:configure.in:7: -1- _AM_SUBST_NOTMAKE([AMDEP_TRUE]) -m4trace:configure.in:7: -1- _AM_SUBST_NOTMAKE([AMDEP_FALSE]) -m4trace:configure.in:7: -1- AC_SUBST([AMDEPBACKSLASH]) -m4trace:configure.in:7: -1- AC_SUBST_TRACE([AMDEPBACKSLASH]) -m4trace:configure.in:7: -1- m4_pattern_allow([^AMDEPBACKSLASH$]) -m4trace:configure.in:7: -1- _AM_SUBST_NOTMAKE([AMDEPBACKSLASH]) -m4trace:configure.in:7: -1- AC_SUBST([CCDEPMODE], [depmode=$am_cv_CC_dependencies_compiler_type]) -m4trace:configure.in:7: -1- AC_SUBST_TRACE([CCDEPMODE]) -m4trace:configure.in:7: -1- m4_pattern_allow([^CCDEPMODE$]) -m4trace:configure.in:7: -1- AM_CONDITIONAL([am__fastdepCC], [ - test "x$enable_dependency_tracking" != xno \ - && test "$am_cv_CC_dependencies_compiler_type" = gcc3]) -m4trace:configure.in:7: -1- AC_SUBST([am__fastdepCC_TRUE]) -m4trace:configure.in:7: -1- AC_SUBST_TRACE([am__fastdepCC_TRUE]) -m4trace:configure.in:7: -1- m4_pattern_allow([^am__fastdepCC_TRUE$]) -m4trace:configure.in:7: -1- AC_SUBST([am__fastdepCC_FALSE]) -m4trace:configure.in:7: -1- AC_SUBST_TRACE([am__fastdepCC_FALSE]) -m4trace:configure.in:7: -1- m4_pattern_allow([^am__fastdepCC_FALSE$]) -m4trace:configure.in:7: -1- _AM_SUBST_NOTMAKE([am__fastdepCC_TRUE]) -m4trace:configure.in:7: -1- _AM_SUBST_NOTMAKE([am__fastdepCC_FALSE]) -m4trace:configure.in:10: -1- AC_PROG_LIBTOOL -m4trace:configure.in:10: -1- _m4_warn([obsolete], [The macro `AC_PROG_LIBTOOL' is obsolete. -You should run autoupdate.], [aclocal.m4:128: AC_PROG_LIBTOOL is expanded from... -configure.in:10: the top level]) -m4trace:configure.in:10: -1- LT_INIT -m4trace:configure.in:10: -1- m4_pattern_forbid([^_?LT_[A-Z_]+$]) -m4trace:configure.in:10: -1- m4_pattern_allow([^(_LT_EOF|LT_DLGLOBAL|LT_DLLAZY_OR_NOW|LT_MULTI_MODULE)$]) -m4trace:configure.in:10: -1- AC_REQUIRE_AUX_FILE([ltmain.sh]) -m4trace:configure.in:10: -1- AC_SUBST([LIBTOOL]) -m4trace:configure.in:10: -1- AC_SUBST_TRACE([LIBTOOL]) -m4trace:configure.in:10: -1- m4_pattern_allow([^LIBTOOL$]) -m4trace:configure.in:10: -1- AC_CANONICAL_HOST -m4trace:configure.in:10: -1- AC_CANONICAL_BUILD -m4trace:configure.in:10: -1- AC_REQUIRE_AUX_FILE([config.sub]) -m4trace:configure.in:10: -1- AC_REQUIRE_AUX_FILE([config.guess]) -m4trace:configure.in:10: -1- AC_SUBST([build], [$ac_cv_build]) -m4trace:configure.in:10: -1- AC_SUBST_TRACE([build]) -m4trace:configure.in:10: -1- m4_pattern_allow([^build$]) -m4trace:configure.in:10: -1- AC_SUBST([build_cpu], [$[1]]) -m4trace:configure.in:10: -1- AC_SUBST_TRACE([build_cpu]) -m4trace:configure.in:10: -1- m4_pattern_allow([^build_cpu$]) -m4trace:configure.in:10: -1- AC_SUBST([build_vendor], [$[2]]) -m4trace:configure.in:10: -1- AC_SUBST_TRACE([build_vendor]) -m4trace:configure.in:10: -1- m4_pattern_allow([^build_vendor$]) -m4trace:configure.in:10: -1- AC_SUBST([build_os]) -m4trace:configure.in:10: -1- AC_SUBST_TRACE([build_os]) -m4trace:configure.in:10: -1- m4_pattern_allow([^build_os$]) -m4trace:configure.in:10: -1- AC_SUBST([host], [$ac_cv_host]) -m4trace:configure.in:10: -1- AC_SUBST_TRACE([host]) -m4trace:configure.in:10: -1- m4_pattern_allow([^host$]) -m4trace:configure.in:10: -1- AC_SUBST([host_cpu], [$[1]]) -m4trace:configure.in:10: -1- AC_SUBST_TRACE([host_cpu]) -m4trace:configure.in:10: -1- m4_pattern_allow([^host_cpu$]) -m4trace:configure.in:10: -1- AC_SUBST([host_vendor], [$[2]]) -m4trace:configure.in:10: -1- AC_SUBST_TRACE([host_vendor]) -m4trace:configure.in:10: -1- m4_pattern_allow([^host_vendor$]) -m4trace:configure.in:10: -1- AC_SUBST([host_os]) -m4trace:configure.in:10: -1- AC_SUBST_TRACE([host_os]) -m4trace:configure.in:10: -1- m4_pattern_allow([^host_os$]) -m4trace:configure.in:10: -1- AC_SUBST([SED]) -m4trace:configure.in:10: -1- AC_SUBST_TRACE([SED]) -m4trace:configure.in:10: -1- m4_pattern_allow([^SED$]) -m4trace:configure.in:10: -1- AC_SUBST([GREP]) -m4trace:configure.in:10: -1- AC_SUBST_TRACE([GREP]) -m4trace:configure.in:10: -1- m4_pattern_allow([^GREP$]) -m4trace:configure.in:10: -1- AC_SUBST([EGREP]) -m4trace:configure.in:10: -1- AC_SUBST_TRACE([EGREP]) -m4trace:configure.in:10: -1- m4_pattern_allow([^EGREP$]) -m4trace:configure.in:10: -1- AC_SUBST([FGREP]) -m4trace:configure.in:10: -1- AC_SUBST_TRACE([FGREP]) -m4trace:configure.in:10: -1- m4_pattern_allow([^FGREP$]) -m4trace:configure.in:10: -1- AC_SUBST([GREP]) -m4trace:configure.in:10: -1- AC_SUBST_TRACE([GREP]) -m4trace:configure.in:10: -1- m4_pattern_allow([^GREP$]) -m4trace:configure.in:10: -1- AC_SUBST([LD]) -m4trace:configure.in:10: -1- AC_SUBST_TRACE([LD]) -m4trace:configure.in:10: -1- m4_pattern_allow([^LD$]) -m4trace:configure.in:10: -1- AC_SUBST([DUMPBIN]) -m4trace:configure.in:10: -1- AC_SUBST_TRACE([DUMPBIN]) -m4trace:configure.in:10: -1- m4_pattern_allow([^DUMPBIN$]) -m4trace:configure.in:10: -1- AC_SUBST([ac_ct_DUMPBIN]) -m4trace:configure.in:10: -1- AC_SUBST_TRACE([ac_ct_DUMPBIN]) -m4trace:configure.in:10: -1- m4_pattern_allow([^ac_ct_DUMPBIN$]) -m4trace:configure.in:10: -1- AC_SUBST([DUMPBIN]) -m4trace:configure.in:10: -1- AC_SUBST_TRACE([DUMPBIN]) -m4trace:configure.in:10: -1- m4_pattern_allow([^DUMPBIN$]) -m4trace:configure.in:10: -1- AC_SUBST([NM]) -m4trace:configure.in:10: -1- AC_SUBST_TRACE([NM]) -m4trace:configure.in:10: -1- m4_pattern_allow([^NM$]) -m4trace:configure.in:10: -1- AC_SUBST([LN_S], [$as_ln_s]) -m4trace:configure.in:10: -1- AC_SUBST_TRACE([LN_S]) -m4trace:configure.in:10: -1- m4_pattern_allow([^LN_S$]) -m4trace:configure.in:10: -1- AC_SUBST([OBJDUMP]) -m4trace:configure.in:10: -1- AC_SUBST_TRACE([OBJDUMP]) -m4trace:configure.in:10: -1- m4_pattern_allow([^OBJDUMP$]) -m4trace:configure.in:10: -1- AC_SUBST([OBJDUMP]) -m4trace:configure.in:10: -1- AC_SUBST_TRACE([OBJDUMP]) -m4trace:configure.in:10: -1- m4_pattern_allow([^OBJDUMP$]) -m4trace:configure.in:10: -1- AC_SUBST([DLLTOOL]) -m4trace:configure.in:10: -1- AC_SUBST_TRACE([DLLTOOL]) -m4trace:configure.in:10: -1- m4_pattern_allow([^DLLTOOL$]) -m4trace:configure.in:10: -1- AC_SUBST([DLLTOOL]) -m4trace:configure.in:10: -1- AC_SUBST_TRACE([DLLTOOL]) -m4trace:configure.in:10: -1- m4_pattern_allow([^DLLTOOL$]) -m4trace:configure.in:10: -1- AC_SUBST([AR]) -m4trace:configure.in:10: -1- AC_SUBST_TRACE([AR]) -m4trace:configure.in:10: -1- m4_pattern_allow([^AR$]) -m4trace:configure.in:10: -1- AC_SUBST([ac_ct_AR]) -m4trace:configure.in:10: -1- AC_SUBST_TRACE([ac_ct_AR]) -m4trace:configure.in:10: -1- m4_pattern_allow([^ac_ct_AR$]) -m4trace:configure.in:10: -1- AC_SUBST([STRIP]) -m4trace:configure.in:10: -1- AC_SUBST_TRACE([STRIP]) -m4trace:configure.in:10: -1- m4_pattern_allow([^STRIP$]) -m4trace:configure.in:10: -1- AC_SUBST([RANLIB]) -m4trace:configure.in:10: -1- AC_SUBST_TRACE([RANLIB]) -m4trace:configure.in:10: -1- m4_pattern_allow([^RANLIB$]) -m4trace:configure.in:10: -1- m4_pattern_allow([LT_OBJDIR]) -m4trace:configure.in:10: -1- AC_DEFINE_TRACE_LITERAL([LT_OBJDIR]) -m4trace:configure.in:10: -1- m4_pattern_allow([^LT_OBJDIR$]) -m4trace:configure.in:10: -1- AH_OUTPUT([LT_OBJDIR], [/* Define to the sub-directory in which libtool stores uninstalled libraries. - */ -@%:@undef LT_OBJDIR]) -m4trace:configure.in:10: -1- LT_SUPPORTED_TAG([CC]) -m4trace:configure.in:10: -1- AC_SUBST([MANIFEST_TOOL]) -m4trace:configure.in:10: -1- AC_SUBST_TRACE([MANIFEST_TOOL]) -m4trace:configure.in:10: -1- m4_pattern_allow([^MANIFEST_TOOL$]) -m4trace:configure.in:10: -1- AC_SUBST([DSYMUTIL]) -m4trace:configure.in:10: -1- AC_SUBST_TRACE([DSYMUTIL]) -m4trace:configure.in:10: -1- m4_pattern_allow([^DSYMUTIL$]) -m4trace:configure.in:10: -1- AC_SUBST([NMEDIT]) -m4trace:configure.in:10: -1- AC_SUBST_TRACE([NMEDIT]) -m4trace:configure.in:10: -1- m4_pattern_allow([^NMEDIT$]) -m4trace:configure.in:10: -1- AC_SUBST([LIPO]) -m4trace:configure.in:10: -1- AC_SUBST_TRACE([LIPO]) -m4trace:configure.in:10: -1- m4_pattern_allow([^LIPO$]) -m4trace:configure.in:10: -1- AC_SUBST([OTOOL]) -m4trace:configure.in:10: -1- AC_SUBST_TRACE([OTOOL]) -m4trace:configure.in:10: -1- m4_pattern_allow([^OTOOL$]) -m4trace:configure.in:10: -1- AC_SUBST([OTOOL64]) -m4trace:configure.in:10: -1- AC_SUBST_TRACE([OTOOL64]) -m4trace:configure.in:10: -1- m4_pattern_allow([^OTOOL64$]) -m4trace:configure.in:10: -1- AH_OUTPUT([HAVE_DLFCN_H], [/* Define to 1 if you have the header file. */ -@%:@undef HAVE_DLFCN_H]) -m4trace:configure.in:10: -1- AC_SUBST([CPP]) -m4trace:configure.in:10: -1- AC_SUBST_TRACE([CPP]) -m4trace:configure.in:10: -1- m4_pattern_allow([^CPP$]) -m4trace:configure.in:10: -1- AC_SUBST([CPPFLAGS]) -m4trace:configure.in:10: -1- AC_SUBST_TRACE([CPPFLAGS]) -m4trace:configure.in:10: -1- m4_pattern_allow([^CPPFLAGS$]) -m4trace:configure.in:10: -1- AC_SUBST([CPP]) -m4trace:configure.in:10: -1- AC_SUBST_TRACE([CPP]) -m4trace:configure.in:10: -1- m4_pattern_allow([^CPP$]) -m4trace:configure.in:10: -1- AC_DEFINE_TRACE_LITERAL([STDC_HEADERS]) -m4trace:configure.in:10: -1- m4_pattern_allow([^STDC_HEADERS$]) -m4trace:configure.in:10: -1- AH_OUTPUT([STDC_HEADERS], [/* Define to 1 if you have the ANSI C header files. */ -@%:@undef STDC_HEADERS]) -m4trace:configure.in:10: -1- AH_OUTPUT([HAVE_SYS_TYPES_H], [/* Define to 1 if you have the header file. */ -@%:@undef HAVE_SYS_TYPES_H]) -m4trace:configure.in:10: -1- AH_OUTPUT([HAVE_SYS_STAT_H], [/* Define to 1 if you have the header file. */ -@%:@undef HAVE_SYS_STAT_H]) -m4trace:configure.in:10: -1- AH_OUTPUT([HAVE_STDLIB_H], [/* Define to 1 if you have the header file. */ -@%:@undef HAVE_STDLIB_H]) -m4trace:configure.in:10: -1- AH_OUTPUT([HAVE_STRING_H], [/* Define to 1 if you have the header file. */ -@%:@undef HAVE_STRING_H]) -m4trace:configure.in:10: -1- AH_OUTPUT([HAVE_MEMORY_H], [/* Define to 1 if you have the header file. */ -@%:@undef HAVE_MEMORY_H]) -m4trace:configure.in:10: -1- AH_OUTPUT([HAVE_STRINGS_H], [/* Define to 1 if you have the header file. */ -@%:@undef HAVE_STRINGS_H]) -m4trace:configure.in:10: -1- AH_OUTPUT([HAVE_INTTYPES_H], [/* Define to 1 if you have the header file. */ -@%:@undef HAVE_INTTYPES_H]) -m4trace:configure.in:10: -1- AH_OUTPUT([HAVE_STDINT_H], [/* Define to 1 if you have the header file. */ -@%:@undef HAVE_STDINT_H]) -m4trace:configure.in:10: -1- AH_OUTPUT([HAVE_UNISTD_H], [/* Define to 1 if you have the header file. */ -@%:@undef HAVE_UNISTD_H]) -m4trace:configure.in:10: -1- AC_DEFINE_TRACE_LITERAL([HAVE_DLFCN_H]) -m4trace:configure.in:10: -1- m4_pattern_allow([^HAVE_DLFCN_H$]) -m4trace:configure.in:15: -1- AH_OUTPUT([HAVE_LIBSSL], [/* Define to 1 if you have the `ssl\' library (-lssl). */ -@%:@undef HAVE_LIBSSL]) -m4trace:configure.in:15: -1- AC_DEFINE_TRACE_LITERAL([HAVE_LIBSSL]) -m4trace:configure.in:15: -1- m4_pattern_allow([^HAVE_LIBSSL$]) -m4trace:configure.in:16: -1- AH_OUTPUT([HAVE_LIBPTHREAD], [/* Define to 1 if you have the `pthread\' library (-lpthread). */ -@%:@undef HAVE_LIBPTHREAD]) -m4trace:configure.in:16: -1- AC_DEFINE_TRACE_LITERAL([HAVE_LIBPTHREAD]) -m4trace:configure.in:16: -1- m4_pattern_allow([^HAVE_LIBPTHREAD$]) -m4trace:configure.in:22: -1- AC_CONFIG_FILES([${OUTPUT_FILES}]) -m4trace:configure.in:23: -1- AC_CONFIG_FILES([Makefile src/Makefile]) -m4trace:configure.in:23: -1- _m4_warn([obsolete], [AC_OUTPUT should be used without arguments. -You should run autoupdate.], []) -m4trace:configure.in:23: -1- AC_SUBST([LIB@&t@OBJS], [$ac_libobjs]) -m4trace:configure.in:23: -1- AC_SUBST_TRACE([LIB@&t@OBJS]) -m4trace:configure.in:23: -1- m4_pattern_allow([^LIB@&t@OBJS$]) -m4trace:configure.in:23: -1- AC_SUBST([LTLIBOBJS], [$ac_ltlibobjs]) -m4trace:configure.in:23: -1- AC_SUBST_TRACE([LTLIBOBJS]) -m4trace:configure.in:23: -1- m4_pattern_allow([^LTLIBOBJS$]) -m4trace:configure.in:23: -1- AM_CONDITIONAL([am__EXEEXT], [test -n "$EXEEXT"]) -m4trace:configure.in:23: -1- AC_SUBST([am__EXEEXT_TRUE]) -m4trace:configure.in:23: -1- AC_SUBST_TRACE([am__EXEEXT_TRUE]) -m4trace:configure.in:23: -1- m4_pattern_allow([^am__EXEEXT_TRUE$]) -m4trace:configure.in:23: -1- AC_SUBST([am__EXEEXT_FALSE]) -m4trace:configure.in:23: -1- AC_SUBST_TRACE([am__EXEEXT_FALSE]) -m4trace:configure.in:23: -1- m4_pattern_allow([^am__EXEEXT_FALSE$]) -m4trace:configure.in:23: -1- _AM_SUBST_NOTMAKE([am__EXEEXT_TRUE]) -m4trace:configure.in:23: -1- _AM_SUBST_NOTMAKE([am__EXEEXT_FALSE]) -m4trace:configure.in:23: -1- AC_SUBST_TRACE([top_builddir]) -m4trace:configure.in:23: -1- AC_SUBST_TRACE([top_build_prefix]) -m4trace:configure.in:23: -1- AC_SUBST_TRACE([srcdir]) -m4trace:configure.in:23: -1- AC_SUBST_TRACE([abs_srcdir]) -m4trace:configure.in:23: -1- AC_SUBST_TRACE([top_srcdir]) -m4trace:configure.in:23: -1- AC_SUBST_TRACE([abs_top_srcdir]) -m4trace:configure.in:23: -1- AC_SUBST_TRACE([builddir]) -m4trace:configure.in:23: -1- AC_SUBST_TRACE([abs_builddir]) -m4trace:configure.in:23: -1- AC_SUBST_TRACE([abs_top_builddir]) -m4trace:configure.in:23: -1- AC_SUBST_TRACE([INSTALL]) -m4trace:configure.in:23: -1- AC_SUBST_TRACE([MKDIR_P]) -m4trace:configure.in:23: -1- AC_REQUIRE_AUX_FILE([ltmain.sh]) -m4trace:configure.in:24: -1- AC_SUBST([LIB@&t@OBJS], [$ac_libobjs]) -m4trace:configure.in:24: -1- AC_SUBST_TRACE([LIB@&t@OBJS]) -m4trace:configure.in:24: -1- m4_pattern_allow([^LIB@&t@OBJS$]) -m4trace:configure.in:24: -1- AC_SUBST([LTLIBOBJS], [$ac_ltlibobjs]) -m4trace:configure.in:24: -1- AC_SUBST_TRACE([LTLIBOBJS]) -m4trace:configure.in:24: -1- m4_pattern_allow([^LTLIBOBJS$]) -m4trace:configure.in:24: -1- AM_CONDITIONAL([am__EXEEXT], [test -n "$EXEEXT"]) -m4trace:configure.in:24: -1- AC_SUBST([am__EXEEXT_TRUE]) -m4trace:configure.in:24: -1- AC_SUBST_TRACE([am__EXEEXT_TRUE]) -m4trace:configure.in:24: -1- m4_pattern_allow([^am__EXEEXT_TRUE$]) -m4trace:configure.in:24: -1- AC_SUBST([am__EXEEXT_FALSE]) -m4trace:configure.in:24: -1- AC_SUBST_TRACE([am__EXEEXT_FALSE]) -m4trace:configure.in:24: -1- m4_pattern_allow([^am__EXEEXT_FALSE$]) -m4trace:configure.in:24: -1- _AM_SUBST_NOTMAKE([am__EXEEXT_TRUE]) -m4trace:configure.in:24: -1- _AM_SUBST_NOTMAKE([am__EXEEXT_FALSE]) -m4trace:configure.in:24: -1- AC_SUBST_TRACE([top_builddir]) -m4trace:configure.in:24: -1- AC_SUBST_TRACE([top_build_prefix]) -m4trace:configure.in:24: -1- AC_SUBST_TRACE([srcdir]) -m4trace:configure.in:24: -1- AC_SUBST_TRACE([abs_srcdir]) -m4trace:configure.in:24: -1- AC_SUBST_TRACE([top_srcdir]) -m4trace:configure.in:24: -1- AC_SUBST_TRACE([abs_top_srcdir]) -m4trace:configure.in:24: -1- AC_SUBST_TRACE([builddir]) -m4trace:configure.in:24: -1- AC_SUBST_TRACE([abs_builddir]) -m4trace:configure.in:24: -1- AC_SUBST_TRACE([abs_top_builddir]) -m4trace:configure.in:24: -1- AC_SUBST_TRACE([INSTALL]) -m4trace:configure.in:24: -1- AC_SUBST_TRACE([MKDIR_P]) -m4trace:configure.in:24: -1- AC_REQUIRE_AUX_FILE([ltmain.sh]) diff -Nru libshairport-1.2.0.20310.1/config.h.in libshairport-1.2.1~git20120110.aeb4987/config.h.in --- libshairport-1.2.0.20310.1/config.h.in 2011-11-10 19:35:56.000000000 +0000 +++ libshairport-1.2.1~git20120110.aeb4987/config.h.in 2012-01-11 04:34:41.000000000 +0000 @@ -6,6 +6,12 @@ /* Define to 1 if you have the header file. */ #undef HAVE_INTTYPES_H +/* Define to 1 if you have the `crypto' library (-lcrypto). */ +#undef HAVE_LIBCRYPTO + +/* Define to 1 if you have the `m' library (-lm). */ +#undef HAVE_LIBM + /* Define to 1 if you have the `pthread' library (-lpthread). */ #undef HAVE_LIBPTHREAD diff -Nru libshairport-1.2.0.20310.1/configure libshairport-1.2.1~git20120110.aeb4987/configure --- libshairport-1.2.0.20310.1/configure 2011-11-10 19:35:55.000000000 +0000 +++ libshairport-1.2.1~git20120110.aeb4987/configure 2012-01-11 04:34:40.000000000 +0000 @@ -1,6 +1,6 @@ #! /bin/sh # Guess values for system-dependent variables and create Makefiles. -# Generated by GNU Autoconf 2.68 for shairport.c 1.2.0. +# Generated by GNU Autoconf 2.68 for shairport.c 1.2.1. # # Report bugs to . # @@ -570,8 +570,8 @@ # Identity of this package. PACKAGE_NAME='shairport.c' PACKAGE_TARNAME='shairport-c' -PACKAGE_VERSION='1.2.0' -PACKAGE_STRING='shairport.c 1.2.0' +PACKAGE_VERSION='1.2.1' +PACKAGE_STRING='shairport.c 1.2.1' PACKAGE_BUGREPORT='http://trac.xbmc.org' PACKAGE_URL='' @@ -615,6 +615,7 @@ am__EXEEXT_TRUE LTLIBOBJS LIBOBJS +LIBSHAIRPORT_LIBTOOL_VERSION CPP OTOOL64 OTOOL @@ -726,8 +727,8 @@ ac_user_opts=' enable_option_checking enable_dependency_tracking -enable_static enable_shared +enable_static with_pic enable_fast_install with_gnu_ld @@ -1285,7 +1286,7 @@ # Omit some internal or obsolete options to make the list less imposing. # This message is too long to be a string in the A/UX 3.1 sh. cat <<_ACEOF -\`configure' configures shairport.c 1.2.0 to adapt to many kinds of systems. +\`configure' configures shairport.c 1.2.1 to adapt to many kinds of systems. Usage: $0 [OPTION]... [VAR=VALUE]... @@ -1355,7 +1356,7 @@ if test -n "$ac_init_help"; then case $ac_init_help in - short | recursive ) echo "Configuration of shairport.c 1.2.0:";; + short | recursive ) echo "Configuration of shairport.c 1.2.1:";; esac cat <<\_ACEOF @@ -1365,8 +1366,8 @@ --enable-FEATURE[=ARG] include FEATURE [ARG=yes] --disable-dependency-tracking speeds up one-time build --enable-dependency-tracking do not reject slow dependency extractors - --enable-static[=PKGS] build static libraries [default=no] --enable-shared[=PKGS] build shared libraries [default=yes] + --enable-static[=PKGS] build static libraries [default=yes] --enable-fast-install[=PKGS] optimize for fast installation [default=yes] --disable-libtool-lock avoid locking (might break parallel builds) @@ -1374,7 +1375,7 @@ Optional Packages: --with-PACKAGE[=ARG] use PACKAGE [ARG=yes] --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no) - --with-pic try to use only PIC/non-PIC objects [default=use + --with-pic[=PKGS] try to use only PIC/non-PIC objects [default=use both] --with-gnu-ld assume the C compiler uses GNU ld [default=no] --with-sysroot=DIR Search for dependent libraries within DIR @@ -1456,7 +1457,7 @@ test -n "$ac_init_help" && exit $ac_status if $ac_init_version; then cat <<\_ACEOF -shairport.c configure 1.2.0 +shairport.c configure 1.2.1 generated by GNU Autoconf 2.68 Copyright (C) 2010 Free Software Foundation, Inc. @@ -1730,11 +1731,102 @@ eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno } # ac_fn_c_check_func + +# ac_fn_c_check_header_mongrel LINENO HEADER VAR INCLUDES +# ------------------------------------------------------- +# Tests whether HEADER exists, giving a warning if it cannot be compiled using +# the include files in INCLUDES and setting the cache variable VAR +# accordingly. +ac_fn_c_check_header_mongrel () +{ + as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack + if eval \${$3+:} false; then : + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 +$as_echo_n "checking for $2... " >&6; } +if eval \${$3+:} false; then : + $as_echo_n "(cached) " >&6 +fi +eval ac_res=\$$3 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 +$as_echo "$ac_res" >&6; } +else + # Is the header compilable? +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 usability" >&5 +$as_echo_n "checking $2 usability... " >&6; } +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +$4 +#include <$2> +_ACEOF +if ac_fn_c_try_compile "$LINENO"; then : + ac_header_compiler=yes +else + ac_header_compiler=no +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_compiler" >&5 +$as_echo "$ac_header_compiler" >&6; } + +# Is the header present? +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking $2 presence" >&5 +$as_echo_n "checking $2 presence... " >&6; } +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include <$2> +_ACEOF +if ac_fn_c_try_cpp "$LINENO"; then : + ac_header_preproc=yes +else + ac_header_preproc=no +fi +rm -f conftest.err conftest.i conftest.$ac_ext +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_header_preproc" >&5 +$as_echo "$ac_header_preproc" >&6; } + +# So? What about this header? +case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in #(( + yes:no: ) + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&5 +$as_echo "$as_me: WARNING: $2: accepted by the compiler, rejected by the preprocessor!" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5 +$as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;} + ;; + no:yes:* ) + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: present but cannot be compiled" >&5 +$as_echo "$as_me: WARNING: $2: present but cannot be compiled" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: check for missing prerequisite headers?" >&5 +$as_echo "$as_me: WARNING: $2: check for missing prerequisite headers?" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: see the Autoconf documentation" >&5 +$as_echo "$as_me: WARNING: $2: see the Autoconf documentation" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: section \"Present But Cannot Be Compiled\"" >&5 +$as_echo "$as_me: WARNING: $2: section \"Present But Cannot Be Compiled\"" >&2;} + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5 +$as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;} +( $as_echo "## ----------------------------------- ## +## Report this to http://trac.xbmc.org ## +## ----------------------------------- ##" + ) | sed "s/^/$as_me: WARNING: /" >&2 + ;; +esac + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5 +$as_echo_n "checking for $2... " >&6; } +if eval \${$3+:} false; then : + $as_echo_n "(cached) " >&6 +else + eval "$3=\$ac_header_compiler" +fi +eval ac_res=\$$3 + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5 +$as_echo "$ac_res" >&6; } +fi + eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno + +} # ac_fn_c_check_header_mongrel cat >config.log <<_ACEOF This file contains any messages produced by compilers while running configure, to aid debugging if configure makes a mistake. -It was created by shairport.c $as_me 1.2.0, which was +It was created by shairport.c $as_me 1.2.1, which was generated by GNU Autoconf 2.68. Invocation command line was $ $0 $@ @@ -2548,8 +2640,8 @@ # Define the identity of the package. - PACKAGE=shairport - VERSION=1.2.0 + PACKAGE=libshairport + VERSION=1.2.1 cat >>confdefs.h <<_ACEOF @@ -2591,6 +2683,15 @@ ac_config_headers="$ac_config_headers config.h" + + +# library version info +# NOTE: this is not the same as the library's release number +LIBSHAIRPORT_INTERFACE=1 +LIBSHAIRPORT_REVISION=0 +LIBSHAIRPORT_AGE=0 +LIBSHAIRPORT_LIBTOOL_VERSION=$LIBSHAIRPORT_INTERFACE:$LIBSHAIRPORT_REVISION:$LIBSHAIRPORT_MINOR + ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' @@ -3570,38 +3671,6 @@ fi - -# Check whether --enable-static was given. -if test "${enable_static+set}" = set; then : - enableval=$enable_static; p=${PACKAGE-default} - case $enableval in - yes) enable_static=yes ;; - no) enable_static=no ;; - *) - enable_static=no - # Look at the argument we got. We use all the common list separators. - lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," - for pkg in $enableval; do - IFS="$lt_save_ifs" - if test "X$pkg" = "X$p"; then - enable_static=yes - fi - done - IFS="$lt_save_ifs" - ;; - esac -else - enable_static=no -fi - - - - - - - - - case `pwd` in *\ * | *\ *) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&5 @@ -3610,8 +3679,8 @@ -macro_version='2.4' -macro_revision='1.3293' +macro_version='2.4.2' +macro_revision='1.3337' @@ -4456,6 +4525,11 @@ lt_cv_sys_max_cmd_len=196608 ;; + os2*) + # The test takes a long time on OS/2. + lt_cv_sys_max_cmd_len=8192 + ;; + osf*) # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not @@ -4495,7 +4569,7 @@ # If test is not a shell built-in, we'll probably end up computing a # maximum length that is only half of the actual maximum length, but # we can't tell. - while { test "X"`func_fallback_echo "$teststring$teststring" 2>/dev/null` \ + while { test "X"`env echo "$teststring$teststring" 2>/dev/null` \ = "X$teststring$teststring"; } >/dev/null 2>&1 && test $i != 17 # 1/2 MB should be enough do @@ -4924,7 +4998,7 @@ lt_cv_deplibs_check_method=pass_all ;; -# This must be Linux ELF. +# This must be glibc/ELF. linux* | k*bsd*-gnu | kopensolaris*-gnu) lt_cv_deplibs_check_method=pass_all ;; @@ -5565,13 +5639,13 @@ if test -n "$RANLIB"; then case $host_os in openbsd*) - old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$oldlib" + old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$tool_oldlib" ;; *) - old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$oldlib" + old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$tool_oldlib" ;; esac - old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib" + old_archive_cmds="$old_archive_cmds~\$RANLIB \$tool_oldlib" fi case $host_os in @@ -5718,6 +5792,7 @@ # which start with @ or ?. lt_cv_sys_global_symbol_pipe="$AWK '"\ " {last_section=section; section=\$ 3};"\ +" /^COFF SYMBOL TABLE/{for(i in hide) delete hide[i]};"\ " /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\ " \$ 0!~/External *\|/{next};"\ " / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\ @@ -6106,7 +6181,7 @@ CFLAGS="$SAVE_CFLAGS" fi ;; -sparc*-*solaris*) +*-*solaris*) # Find out which ABI we are using. echo 'int i;' > conftest.$ac_ext if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5 @@ -6117,7 +6192,20 @@ case `/usr/bin/file conftest.o` in *64-bit*) case $lt_cv_prog_gnu_ld in - yes*) LD="${LD-ld} -m elf64_sparc" ;; + yes*) + case $host in + i?86-*-solaris*) + LD="${LD-ld} -m elf_x86_64" + ;; + sparc*-*-solaris*) + LD="${LD-ld} -m elf64_sparc" + ;; + esac + # GNU ld 2.21 introduced _sol2 emulations. Use them if available. + if ${LD-ld} -V | grep _sol2 >/dev/null 2>&1; then + LD="${LD-ld}_sol2" + fi + ;; *) if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then LD="${LD-ld} -64" @@ -6757,7 +6845,13 @@ $LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \ -dynamiclib -Wl,-single_module conftest.c 2>conftest.err _lt_result=$? - if test -f libconftest.dylib && test ! -s conftest.err && test $_lt_result = 0; then + # If there is a non-empty error log, and "single_module" + # appears in it, assume the flag caused a linker warning + if test -s conftest.err && $GREP single_module conftest.err; then + cat conftest.err >&5 + # Otherwise, if the output was created with a 0 exit code from + # the compiler, it worked. + elif test -f libconftest.dylib && test $_lt_result -eq 0; then lt_cv_apple_cc_single_mod=yes else cat conftest.err >&5 @@ -6768,6 +6862,7 @@ fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_apple_cc_single_mod" >&5 $as_echo "$lt_cv_apple_cc_single_mod" >&6; } + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -exported_symbols_list linker flag" >&5 $as_echo_n "checking for -exported_symbols_list linker flag... " >&6; } if ${lt_cv_ld_exported_symbols_list+:} false; then : @@ -6800,6 +6895,7 @@ fi { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_exported_symbols_list" >&5 $as_echo "$lt_cv_ld_exported_symbols_list" >&6; } + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -force_load linker flag" >&5 $as_echo_n "checking for -force_load linker flag... " >&6; } if ${lt_cv_ld_force_load+:} false; then : @@ -6821,7 +6917,9 @@ echo "$LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a" >&5 $LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a 2>conftest.err _lt_result=$? - if test -f conftest && test ! -s conftest.err && test $_lt_result = 0 && $GREP forced_load conftest 2>&1 >/dev/null; then + if test -s conftest.err && $GREP force_load conftest.err; then + cat conftest.err >&5 + elif test -f conftest && test $_lt_result -eq 0 && $GREP forced_load conftest >/dev/null 2>&1 ; then lt_cv_ld_force_load=yes else cat conftest.err >&5 @@ -7192,11 +7290,56 @@ + # Check whether --enable-static was given. +if test "${enable_static+set}" = set; then : + enableval=$enable_static; p=${PACKAGE-default} + case $enableval in + yes) enable_static=yes ;; + no) enable_static=no ;; + *) + enable_static=no + # Look at the argument we got. We use all the common list separators. + lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," + for pkg in $enableval; do + IFS="$lt_save_ifs" + if test "X$pkg" = "X$p"; then + enable_static=yes + fi + done + IFS="$lt_save_ifs" + ;; + esac +else + enable_static=yes +fi + + + + + + + + # Check whether --with-pic was given. if test "${with_pic+set}" = set; then : - withval=$with_pic; pic_mode="$withval" + withval=$with_pic; lt_p=${PACKAGE-default} + case $withval in + yes|no) pic_mode=$withval ;; + *) + pic_mode=default + # Look at the argument we got. We use all the common list separators. + lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," + for lt_pkg in $withval; do + IFS="$lt_save_ifs" + if test "X$lt_pkg" = "X$lt_p"; then + pic_mode=yes + fi + done + IFS="$lt_save_ifs" + ;; + esac else pic_mode=default fi @@ -7274,6 +7417,10 @@ + + + + test -z "$LN_S" && LN_S="ln -s" @@ -7563,6 +7710,10 @@ $RM -r conftest* +## CAVEAT EMPTOR: +## There is no encapsulation within the following macros, do not change +## the running order or otherwise move them around unless you know exactly +## what you are doing... if test -n "$compiler"; then lt_prog_compiler_no_builtin_flag= @@ -7729,7 +7880,9 @@ case $cc_basename in nvcc*) # Cuda Compiler Driver 2.2 lt_prog_compiler_wl='-Xlinker ' - lt_prog_compiler_pic='-Xcompiler -fPIC' + if test -n "$lt_prog_compiler_pic"; then + lt_prog_compiler_pic="-Xcompiler $lt_prog_compiler_pic" + fi ;; esac else @@ -7820,18 +7973,33 @@ ;; *) case `$CC -V 2>&1 | sed 5q` in - *Sun\ F* | *Sun*Fortran*) + *Sun\ Ceres\ Fortran* | *Sun*Fortran*\ [1-7].* | *Sun*Fortran*\ 8.[0-3]*) # Sun Fortran 8.3 passes all unrecognized flags to the linker lt_prog_compiler_pic='-KPIC' lt_prog_compiler_static='-Bstatic' lt_prog_compiler_wl='' ;; + *Sun\ F* | *Sun*Fortran*) + lt_prog_compiler_pic='-KPIC' + lt_prog_compiler_static='-Bstatic' + lt_prog_compiler_wl='-Qoption ld ' + ;; *Sun\ C*) # Sun C 5.9 lt_prog_compiler_pic='-KPIC' lt_prog_compiler_static='-Bstatic' lt_prog_compiler_wl='-Wl,' ;; + *Intel*\ [CF]*Compiler*) + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='-fPIC' + lt_prog_compiler_static='-static' + ;; + *Portland\ Group*) + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='-fpic' + lt_prog_compiler_static='-Bstatic' + ;; esac ;; esac @@ -8193,7 +8361,6 @@ hardcode_direct=no hardcode_direct_absolute=no hardcode_libdir_flag_spec= - hardcode_libdir_flag_spec_ld= hardcode_libdir_separator= hardcode_minus_L=no hardcode_shlibpath_var=unsupported @@ -8446,8 +8613,7 @@ xlf* | bgf* | bgxlf* | mpixlf*) # IBM XL Fortran 10.1 on PPC cannot create shared libs itself whole_archive_flag_spec='--whole-archive$convenience --no-whole-archive' - hardcode_libdir_flag_spec= - hardcode_libdir_flag_spec_ld='-rpath $libdir' + hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname -o $lib' if test "x$supports_anon_versioning" = xyes; then archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~ @@ -8827,6 +8993,7 @@ # The linker will not automatically build a static lib if we build a DLL. # _LT_TAGVAR(old_archive_from_new_cmds, )='true' enable_shared_with_static_runtimes=yes + exclude_expsyms='_NULL_IMPORT_DESCRIPTOR|_IMPORT_DESCRIPTOR_.*' export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1,DATA/'\'' | $SED -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols' # Don't use ranlib old_postinstall_cmds='chmod 644 $oldlib' @@ -8872,6 +9039,7 @@ hardcode_shlibpath_var=unsupported if test "$lt_cv_ld_force_load" = "yes"; then whole_archive_flag_spec='`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience ${wl}-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`' + else whole_archive_flag_spec='' fi @@ -8900,10 +9068,6 @@ hardcode_shlibpath_var=no ;; - freebsd1*) - ld_shlibs=no - ;; - # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor # support. Future versions do this automatically, but an explicit c++rt0.o # does not break anything, and helps significantly (at the cost of a little @@ -8916,7 +9080,7 @@ ;; # Unfortunately, older versions of FreeBSD 2 do not have this feature. - freebsd2*) + freebsd2.*) archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' hardcode_direct=yes hardcode_minus_L=yes @@ -8955,7 +9119,6 @@ fi if test "$with_gnu_ld" = no; then hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' - hardcode_libdir_flag_spec_ld='+b $libdir' hardcode_libdir_separator=: hardcode_direct=yes hardcode_direct_absolute=yes @@ -9579,11 +9742,6 @@ - - - - - { $as_echo "$as_me:${as_lineno-$LINENO}: checking dynamic linker characteristics" >&5 $as_echo_n "checking dynamic linker characteristics... " >&6; } @@ -9673,7 +9831,7 @@ case $host_os in aix3*) - version_type=linux + version_type=linux # correct to gnu/linux during the next big refactor library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a' shlibpath_var=LIBPATH @@ -9682,7 +9840,7 @@ ;; aix[4-9]*) - version_type=linux + version_type=linux # correct to gnu/linux during the next big refactor need_lib_prefix=no need_version=no hardcode_into_libs=yes @@ -9747,7 +9905,7 @@ ;; bsdi[45]*) - version_type=linux + version_type=linux # correct to gnu/linux during the next big refactor need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' @@ -9886,7 +10044,7 @@ ;; dgux*) - version_type=linux + version_type=linux # correct to gnu/linux during the next big refactor need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext' @@ -9894,10 +10052,6 @@ shlibpath_var=LD_LIBRARY_PATH ;; -freebsd1*) - dynamic_linker=no - ;; - freebsd* | dragonfly*) # DragonFly does not have aout. When/if they implement a new # versioning mechanism, adjust this. @@ -9905,7 +10059,7 @@ objformat=`/usr/bin/objformat` else case $host_os in - freebsd[123]*) objformat=aout ;; + freebsd[23].*) objformat=aout ;; *) objformat=elf ;; esac fi @@ -9923,7 +10077,7 @@ esac shlibpath_var=LD_LIBRARY_PATH case $host_os in - freebsd2*) + freebsd2.*) shlibpath_overrides_runpath=yes ;; freebsd3.[01]* | freebsdelf3.[01]*) @@ -9943,7 +10097,7 @@ ;; gnu*) - version_type=linux + version_type=linux # correct to gnu/linux during the next big refactor need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' @@ -9954,7 +10108,7 @@ ;; haiku*) - version_type=linux + version_type=linux # correct to gnu/linux during the next big refactor need_lib_prefix=no need_version=no dynamic_linker="$host_os runtime_loader" @@ -10015,7 +10169,7 @@ ;; interix[3-9]*) - version_type=linux + version_type=linux # correct to gnu/linux during the next big refactor need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' @@ -10031,7 +10185,7 @@ nonstopux*) version_type=nonstopux ;; *) if test "$lt_cv_prog_gnu_ld" = yes; then - version_type=linux + version_type=linux # correct to gnu/linux during the next big refactor else version_type=irix fi ;; @@ -10068,9 +10222,9 @@ dynamic_linker=no ;; -# This must be Linux ELF. +# This must be glibc/ELF. linux* | k*bsd*-gnu | kopensolaris*-gnu) - version_type=linux + version_type=linux # correct to gnu/linux during the next big refactor need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' @@ -10164,7 +10318,7 @@ ;; newsos6) - version_type=linux + version_type=linux # correct to gnu/linux during the next big refactor library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes @@ -10233,7 +10387,7 @@ ;; solaris*) - version_type=linux + version_type=linux # correct to gnu/linux during the next big refactor need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' @@ -10258,7 +10412,7 @@ ;; sysv4 | sysv4.3*) - version_type=linux + version_type=linux # correct to gnu/linux during the next big refactor library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH @@ -10282,7 +10436,7 @@ sysv4*MP*) if test -d /usr/nec ;then - version_type=linux + version_type=linux # correct to gnu/linux during the next big refactor library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}' soname_spec='$libname${shared_ext}.$major' shlibpath_var=LD_LIBRARY_PATH @@ -10313,7 +10467,7 @@ tpf*) # TPF is a cross-target only. Preferred cross-host = GNU/Linux. - version_type=linux + version_type=linux # correct to gnu/linux during the next big refactor need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' @@ -10323,7 +10477,7 @@ ;; uts4*) - version_type=linux + version_type=linux # correct to gnu/linux during the next big refactor library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH @@ -11105,6 +11259,8 @@ + + ac_config_commands="$ac_config_commands libtool" @@ -11115,8 +11271,45 @@ # Checks for libraries. -#AC_CHECK_LIB([c], [main]) -#AC_CHECK_LIB([m], [main]) +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for main in -lm" >&5 +$as_echo_n "checking for main in -lm... " >&6; } +if ${ac_cv_lib_m_main+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-lm $LIBS" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + + +int +main () +{ +return main (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_m_main=yes +else + ac_cv_lib_m_main=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_m_main" >&5 +$as_echo "$ac_cv_lib_m_main" >&6; } +if test "x$ac_cv_lib_m_main" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LIBM 1 +_ACEOF + + LIBS="-lm $LIBS" + +fi + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for main in -lssl" >&5 $as_echo_n "checking for main in -lssl... " >&6; } if ${ac_cv_lib_ssl_main+:} false; then : @@ -11158,6 +11351,47 @@ as_fn_error $? "$missing_library" "$LINENO" 5 fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for main in -lcrypto" >&5 +$as_echo_n "checking for main in -lcrypto... " >&6; } +if ${ac_cv_lib_crypto_main+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-lcrypto $LIBS" +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + + +int +main () +{ +return main (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + ac_cv_lib_crypto_main=yes +else + ac_cv_lib_crypto_main=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_crypto_main" >&5 +$as_echo "$ac_cv_lib_crypto_main" >&6; } +if test "x$ac_cv_lib_crypto_main" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_LIBCRYPTO 1 +_ACEOF + + LIBS="-lcrypto $LIBS" + +else + as_fn_error $? "$missing_library" "$LINENO" 5 +fi + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for main in -lpthread" >&5 $as_echo_n "checking for main in -lpthread... " >&6; } if ${ac_cv_lib_pthread_main+:} false; then : @@ -11200,13 +11434,18 @@ fi -OUTPUT_FILES="Makefile" +# Checks for headers +ac_fn_c_check_header_mongrel "$LINENO" "ao/ao.h" "ac_cv_header_ao_ao_h" "$ac_includes_default" +if test "x$ac_cv_header_ao_ao_h" = xyes; then : + +else + as_fn_error $? "$missing_library" "$LINENO" 5 +fi + -LIBDIR=$PREFIX -ac_config_files="$ac_config_files ${OUTPUT_FILES}" -ac_config_files="$ac_config_files Makefile src/Makefile" +ac_config_files="$ac_config_files Makefile src/Makefile libshairport.pc" cat >confcache <<\_ACEOF # This file is a shell script that caches the results of configure @@ -11742,7 +11981,7 @@ # report actual input values of CONFIG_FILES etc. instead of their # values after options handling. ac_log=" -This file was extended by shairport.c $as_me 1.2.0, which was +This file was extended by shairport.c $as_me 1.2.1, which was generated by GNU Autoconf 2.68. Invocation command line was CONFIG_FILES = $CONFIG_FILES @@ -11808,7 +12047,7 @@ cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`" ac_cs_version="\\ -shairport.c config.status 1.2.0 +shairport.c config.status 1.2.1 configured by $0, generated by GNU Autoconf 2.68, with options \\"\$ac_cs_config\\" @@ -11937,14 +12176,15 @@ sed_quote_subst='$sed_quote_subst' double_quote_subst='$double_quote_subst' delay_variable_subst='$delay_variable_subst' -enable_static='`$ECHO "$enable_static" | $SED "$delay_single_quote_subst"`' macro_version='`$ECHO "$macro_version" | $SED "$delay_single_quote_subst"`' macro_revision='`$ECHO "$macro_revision" | $SED "$delay_single_quote_subst"`' enable_shared='`$ECHO "$enable_shared" | $SED "$delay_single_quote_subst"`' +enable_static='`$ECHO "$enable_static" | $SED "$delay_single_quote_subst"`' pic_mode='`$ECHO "$pic_mode" | $SED "$delay_single_quote_subst"`' enable_fast_install='`$ECHO "$enable_fast_install" | $SED "$delay_single_quote_subst"`' SHELL='`$ECHO "$SHELL" | $SED "$delay_single_quote_subst"`' ECHO='`$ECHO "$ECHO" | $SED "$delay_single_quote_subst"`' +PATH_SEPARATOR='`$ECHO "$PATH_SEPARATOR" | $SED "$delay_single_quote_subst"`' host_alias='`$ECHO "$host_alias" | $SED "$delay_single_quote_subst"`' host='`$ECHO "$host" | $SED "$delay_single_quote_subst"`' host_os='`$ECHO "$host_os" | $SED "$delay_single_quote_subst"`' @@ -12027,7 +12267,6 @@ allow_undefined_flag='`$ECHO "$allow_undefined_flag" | $SED "$delay_single_quote_subst"`' no_undefined_flag='`$ECHO "$no_undefined_flag" | $SED "$delay_single_quote_subst"`' hardcode_libdir_flag_spec='`$ECHO "$hardcode_libdir_flag_spec" | $SED "$delay_single_quote_subst"`' -hardcode_libdir_flag_spec_ld='`$ECHO "$hardcode_libdir_flag_spec_ld" | $SED "$delay_single_quote_subst"`' hardcode_libdir_separator='`$ECHO "$hardcode_libdir_separator" | $SED "$delay_single_quote_subst"`' hardcode_direct='`$ECHO "$hardcode_direct" | $SED "$delay_single_quote_subst"`' hardcode_direct_absolute='`$ECHO "$hardcode_direct_absolute" | $SED "$delay_single_quote_subst"`' @@ -12083,6 +12322,7 @@ # Quote evaled strings. for var in SHELL \ ECHO \ +PATH_SEPARATOR \ SED \ GREP \ EGREP \ @@ -12133,7 +12373,6 @@ allow_undefined_flag \ no_undefined_flag \ hardcode_libdir_flag_spec \ -hardcode_libdir_flag_spec_ld \ hardcode_libdir_separator \ exclude_expsyms \ include_expsyms \ @@ -12217,9 +12456,9 @@ "config.h") CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;; "depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;; "libtool") CONFIG_COMMANDS="$CONFIG_COMMANDS libtool" ;; - "${OUTPUT_FILES}") CONFIG_FILES="$CONFIG_FILES ${OUTPUT_FILES}" ;; "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;; "src/Makefile") CONFIG_FILES="$CONFIG_FILES src/Makefile" ;; + "libshairport.pc") CONFIG_FILES="$CONFIG_FILES libshairport.pc" ;; *) as_fn_error $? "invalid argument: \`$ac_config_target'" "$LINENO" 5;; esac @@ -12931,8 +13170,8 @@ # NOTE: Changes made to this file will be lost: look at ltmain.sh. # # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, -# 2006, 2007, 2008, 2009, 2010 Free Software Foundation, -# Inc. +# 2006, 2007, 2008, 2009, 2010, 2011 Free Software +# Foundation, Inc. # Written by Gordon Matzigkeit, 1996 # # This file is part of GNU Libtool. @@ -12964,9 +13203,6 @@ # ### BEGIN LIBTOOL CONFIG -# Whether or not to build static libraries. -build_old_libs=$enable_static - # Which release of libtool.m4 was used? macro_version=$macro_version macro_revision=$macro_revision @@ -12974,6 +13210,9 @@ # Whether or not to build shared libraries. build_libtool_libs=$enable_shared +# Whether or not to build static libraries. +build_old_libs=$enable_static + # What type of objects to build. pic_mode=$pic_mode @@ -12986,6 +13225,9 @@ # An echo program that protects backslashes. ECHO=$lt_ECHO +# The PATH separator for the build system. +PATH_SEPARATOR=$lt_PATH_SEPARATOR + # The host system. host_alias=$host_alias host=$host @@ -13287,10 +13529,6 @@ # This must work even if \$libdir does not exist hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec -# If ld is used when linking, flag to hardcode \$libdir into a binary -# during linking. This must work even if \$libdir does not exist. -hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld - # Whether we need a single "-rpath" flag with a separated argument. hardcode_libdir_separator=$lt_hardcode_libdir_separator @@ -13579,2378 +13817,3 @@ $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2;} fi -cat >confcache <<\_ACEOF -# This file is a shell script that caches the results of configure -# tests run on this system so they can be shared between configure -# scripts and configure runs, see configure's option --config-cache. -# It is not useful on other systems. If it contains results you don't -# want to keep, you may remove or edit it. -# -# config.status only pays attention to the cache file if you give it -# the --recheck option to rerun configure. -# -# `ac_cv_env_foo' variables (set or unset) will be overridden when -# loading this file, other *unset* `ac_cv_foo' will be assigned the -# following values. - -_ACEOF - -# The following way of writing the cache mishandles newlines in values, -# but we know of no workaround that is simple, portable, and efficient. -# So, we kill variables containing newlines. -# Ultrix sh set writes to stderr and can't be redirected directly, -# and sets the high bit in the cache file unless we assign to the vars. -( - for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do - eval ac_val=\$$ac_var - case $ac_val in #( - *${as_nl}*) - case $ac_var in #( - *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5 -$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;; - esac - case $ac_var in #( - _ | IFS | as_nl) ;; #( - BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #( - *) { eval $ac_var=; unset $ac_var;} ;; - esac ;; - esac - done - - (set) 2>&1 | - case $as_nl`(ac_space=' '; set) 2>&1` in #( - *${as_nl}ac_space=\ *) - # `set' does not quote correctly, so add quotes: double-quote - # substitution turns \\\\ into \\, and sed turns \\ into \. - sed -n \ - "s/'/'\\\\''/g; - s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p" - ;; #( - *) - # `set' quotes correctly as required by POSIX, so do not add quotes. - sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" - ;; - esac | - sort -) | - sed ' - /^ac_cv_env_/b end - t clear - :clear - s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/ - t end - s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/ - :end' >>confcache -if diff "$cache_file" confcache >/dev/null 2>&1; then :; else - if test -w "$cache_file"; then - if test "x$cache_file" != "x/dev/null"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: updating cache $cache_file" >&5 -$as_echo "$as_me: updating cache $cache_file" >&6;} - if test ! -f "$cache_file" || test -h "$cache_file"; then - cat confcache >"$cache_file" - else - case $cache_file in #( - */* | ?:*) - mv -f confcache "$cache_file"$$ && - mv -f "$cache_file"$$ "$cache_file" ;; #( - *) - mv -f confcache "$cache_file" ;; - esac - fi - fi - else - { $as_echo "$as_me:${as_lineno-$LINENO}: not updating unwritable cache $cache_file" >&5 -$as_echo "$as_me: not updating unwritable cache $cache_file" >&6;} - fi -fi -rm -f confcache - -test "x$prefix" = xNONE && prefix=$ac_default_prefix -# Let make expand exec_prefix. -test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' - -DEFS=-DHAVE_CONFIG_H - -ac_libobjs= -ac_ltlibobjs= -U= -for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue - # 1. Remove the extension, and $U if already installed. - ac_script='s/\$U\././;s/\.o$//;s/\.obj$//' - ac_i=`$as_echo "$ac_i" | sed "$ac_script"` - # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR - # will be set to the directory where LIBOBJS objects are built. - as_fn_append ac_libobjs " \${LIBOBJDIR}$ac_i\$U.$ac_objext" - as_fn_append ac_ltlibobjs " \${LIBOBJDIR}$ac_i"'$U.lo' -done -LIBOBJS=$ac_libobjs - -LTLIBOBJS=$ac_ltlibobjs - - - if test -n "$EXEEXT"; then - am__EXEEXT_TRUE= - am__EXEEXT_FALSE='#' -else - am__EXEEXT_TRUE='#' - am__EXEEXT_FALSE= -fi - -if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then - as_fn_error $? "conditional \"AMDEP\" was never defined. -Usually this means the macro was only invoked conditionally." "$LINENO" 5 -fi -if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then - as_fn_error $? "conditional \"am__fastdepCC\" was never defined. -Usually this means the macro was only invoked conditionally." "$LINENO" 5 -fi -if test -z "${am__EXEEXT_TRUE}" && test -z "${am__EXEEXT_FALSE}"; then - as_fn_error $? "conditional \"am__EXEEXT\" was never defined. -Usually this means the macro was only invoked conditionally." "$LINENO" 5 -fi - -: "${CONFIG_STATUS=./config.status}" -ac_write_fail=0 -ac_clean_files_save=$ac_clean_files -ac_clean_files="$ac_clean_files $CONFIG_STATUS" -{ $as_echo "$as_me:${as_lineno-$LINENO}: creating $CONFIG_STATUS" >&5 -$as_echo "$as_me: creating $CONFIG_STATUS" >&6;} -as_write_fail=0 -cat >$CONFIG_STATUS <<_ASEOF || as_write_fail=1 -#! $SHELL -# Generated by $as_me. -# Run this file to recreate the current configuration. -# Compiler output produced by configure, useful for debugging -# configure, is in config.log if it exists. - -debug=false -ac_cs_recheck=false -ac_cs_silent=false - -SHELL=\${CONFIG_SHELL-$SHELL} -export SHELL -_ASEOF -cat >>$CONFIG_STATUS <<\_ASEOF || as_write_fail=1 -## -------------------- ## -## M4sh Initialization. ## -## -------------------- ## - -# Be more Bourne compatible -DUALCASE=1; export DUALCASE # for MKS sh -if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then : - emulate sh - NULLCMD=: - # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which - # is contrary to our usage. Disable this feature. - alias -g '${1+"$@"}'='"$@"' - setopt NO_GLOB_SUBST -else - case `(set -o) 2>/dev/null` in #( - *posix*) : - set -o posix ;; #( - *) : - ;; -esac -fi - - -as_nl=' -' -export as_nl -# Printing a long string crashes Solaris 7 /usr/bin/printf. -as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' -as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo -as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo -# Prefer a ksh shell builtin over an external printf program on Solaris, -# but without wasting forks for bash or zsh. -if test -z "$BASH_VERSION$ZSH_VERSION" \ - && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then - as_echo='print -r --' - as_echo_n='print -rn --' -elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then - as_echo='printf %s\n' - as_echo_n='printf %s' -else - if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then - as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"' - as_echo_n='/usr/ucb/echo -n' - else - as_echo_body='eval expr "X$1" : "X\\(.*\\)"' - as_echo_n_body='eval - arg=$1; - case $arg in #( - *"$as_nl"*) - expr "X$arg" : "X\\(.*\\)$as_nl"; - arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;; - esac; - expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl" - ' - export as_echo_n_body - as_echo_n='sh -c $as_echo_n_body as_echo' - fi - export as_echo_body - as_echo='sh -c $as_echo_body as_echo' -fi - -# The user is always right. -if test "${PATH_SEPARATOR+set}" != set; then - PATH_SEPARATOR=: - (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { - (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || - PATH_SEPARATOR=';' - } -fi - - -# IFS -# We need space, tab and new line, in precisely that order. Quoting is -# there to prevent editors from complaining about space-tab. -# (If _AS_PATH_WALK were called with IFS unset, it would disable word -# splitting by setting IFS to empty value.) -IFS=" "" $as_nl" - -# Find who we are. Look in the path if we contain no directory separator. -as_myself= -case $0 in #(( - *[\\/]* ) as_myself=$0 ;; - *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR -for as_dir in $PATH -do - IFS=$as_save_IFS - test -z "$as_dir" && as_dir=. - test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break - done -IFS=$as_save_IFS - - ;; -esac -# We did not find ourselves, most probably we were run as `sh COMMAND' -# in which case we are not to be found in the path. -if test "x$as_myself" = x; then - as_myself=$0 -fi -if test ! -f "$as_myself"; then - $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 - exit 1 -fi - -# Unset variables that we do not need and which cause bugs (e.g. in -# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1" -# suppresses any "Segmentation fault" message there. '((' could -# trigger a bug in pdksh 5.2.14. -for as_var in BASH_ENV ENV MAIL MAILPATH -do eval test x\${$as_var+set} = xset \ - && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || : -done -PS1='$ ' -PS2='> ' -PS4='+ ' - -# NLS nuisances. -LC_ALL=C -export LC_ALL -LANGUAGE=C -export LANGUAGE - -# CDPATH. -(unset CDPATH) >/dev/null 2>&1 && unset CDPATH - - -# as_fn_error STATUS ERROR [LINENO LOG_FD] -# ---------------------------------------- -# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are -# provided, also output the error to LOG_FD, referencing LINENO. Then exit the -# script with STATUS, using 1 if that was 0. -as_fn_error () -{ - as_status=$1; test $as_status -eq 0 && as_status=1 - if test "$4"; then - as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack - $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4 - fi - $as_echo "$as_me: error: $2" >&2 - as_fn_exit $as_status -} # as_fn_error - - -# as_fn_set_status STATUS -# ----------------------- -# Set $? to STATUS, without forking. -as_fn_set_status () -{ - return $1 -} # as_fn_set_status - -# as_fn_exit STATUS -# ----------------- -# Exit the shell with STATUS, even in a "trap 0" or "set -e" context. -as_fn_exit () -{ - set +e - as_fn_set_status $1 - exit $1 -} # as_fn_exit - -# as_fn_unset VAR -# --------------- -# Portably unset VAR. -as_fn_unset () -{ - { eval $1=; unset $1;} -} -as_unset=as_fn_unset -# as_fn_append VAR VALUE -# ---------------------- -# Append the text in VALUE to the end of the definition contained in VAR. Take -# advantage of any shell optimizations that allow amortized linear growth over -# repeated appends, instead of the typical quadratic growth present in naive -# implementations. -if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then : - eval 'as_fn_append () - { - eval $1+=\$2 - }' -else - as_fn_append () - { - eval $1=\$$1\$2 - } -fi # as_fn_append - -# as_fn_arith ARG... -# ------------------ -# Perform arithmetic evaluation on the ARGs, and store the result in the -# global $as_val. Take advantage of shells that can avoid forks. The arguments -# must be portable across $(()) and expr. -if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then : - eval 'as_fn_arith () - { - as_val=$(( $* )) - }' -else - as_fn_arith () - { - as_val=`expr "$@" || test $? -eq 1` - } -fi # as_fn_arith - - -if expr a : '\(a\)' >/dev/null 2>&1 && - test "X`expr 00001 : '.*\(...\)'`" = X001; then - as_expr=expr -else - as_expr=false -fi - -if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then - as_basename=basename -else - as_basename=false -fi - -if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then - as_dirname=dirname -else - as_dirname=false -fi - -as_me=`$as_basename -- "$0" || -$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ - X"$0" : 'X\(//\)$' \| \ - X"$0" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X/"$0" | - sed '/^.*\/\([^/][^/]*\)\/*$/{ - s//\1/ - q - } - /^X\/\(\/\/\)$/{ - s//\1/ - q - } - /^X\/\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - -# Avoid depending upon Character Ranges. -as_cr_letters='abcdefghijklmnopqrstuvwxyz' -as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' -as_cr_Letters=$as_cr_letters$as_cr_LETTERS -as_cr_digits='0123456789' -as_cr_alnum=$as_cr_Letters$as_cr_digits - -ECHO_C= ECHO_N= ECHO_T= -case `echo -n x` in #((((( --n*) - case `echo 'xy\c'` in - *c*) ECHO_T=' ';; # ECHO_T is single tab character. - xy) ECHO_C='\c';; - *) echo `echo ksh88 bug on AIX 6.1` > /dev/null - ECHO_T=' ';; - esac;; -*) - ECHO_N='-n';; -esac - -rm -f conf$$ conf$$.exe conf$$.file -if test -d conf$$.dir; then - rm -f conf$$.dir/conf$$.file -else - rm -f conf$$.dir - mkdir conf$$.dir 2>/dev/null -fi -if (echo >conf$$.file) 2>/dev/null; then - if ln -s conf$$.file conf$$ 2>/dev/null; then - as_ln_s='ln -s' - # ... but there are two gotchas: - # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. - # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. - # In both cases, we have to default to `cp -p'. - ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || - as_ln_s='cp -p' - elif ln conf$$.file conf$$ 2>/dev/null; then - as_ln_s=ln - else - as_ln_s='cp -p' - fi -else - as_ln_s='cp -p' -fi -rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file -rmdir conf$$.dir 2>/dev/null - - -# as_fn_mkdir_p -# ------------- -# Create "$as_dir" as a directory, including parents if necessary. -as_fn_mkdir_p () -{ - - case $as_dir in #( - -*) as_dir=./$as_dir;; - esac - test -d "$as_dir" || eval $as_mkdir_p || { - as_dirs= - while :; do - case $as_dir in #( - *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( - *) as_qdir=$as_dir;; - esac - as_dirs="'$as_qdir' $as_dirs" - as_dir=`$as_dirname -- "$as_dir" || -$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$as_dir" : 'X\(//\)[^/]' \| \ - X"$as_dir" : 'X\(//\)$' \| \ - X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X"$as_dir" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - test -d "$as_dir" && break - done - test -z "$as_dirs" || eval "mkdir $as_dirs" - } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir" - - -} # as_fn_mkdir_p -if mkdir -p . 2>/dev/null; then - as_mkdir_p='mkdir -p "$as_dir"' -else - test -d ./-p && rmdir ./-p - as_mkdir_p=false -fi - -if test -x / >/dev/null 2>&1; then - as_test_x='test -x' -else - if ls -dL / >/dev/null 2>&1; then - as_ls_L_option=L - else - as_ls_L_option= - fi - as_test_x=' - eval sh -c '\'' - if test -d "$1"; then - test -d "$1/."; - else - case $1 in #( - -*)set "./$1";; - esac; - case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in #(( - ???[sx]*):;;*)false;;esac;fi - '\'' sh - ' -fi -as_executable_p=$as_test_x - -# Sed expression to map a string onto a valid CPP name. -as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" - -# Sed expression to map a string onto a valid variable name. -as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" - - -exec 6>&1 -## ----------------------------------- ## -## Main body of $CONFIG_STATUS script. ## -## ----------------------------------- ## -_ASEOF -test $as_write_fail = 0 && chmod +x $CONFIG_STATUS || ac_write_fail=1 - -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -# Save the log message, to keep $0 and so on meaningful, and to -# report actual input values of CONFIG_FILES etc. instead of their -# values after options handling. -ac_log=" -This file was extended by shairport.c $as_me 1.2.0, which was -generated by GNU Autoconf 2.68. Invocation command line was - - CONFIG_FILES = $CONFIG_FILES - CONFIG_HEADERS = $CONFIG_HEADERS - CONFIG_LINKS = $CONFIG_LINKS - CONFIG_COMMANDS = $CONFIG_COMMANDS - $ $0 $@ - -on `(hostname || uname -n) 2>/dev/null | sed 1q` -" - -_ACEOF - -case $ac_config_files in *" -"*) set x $ac_config_files; shift; ac_config_files=$*;; -esac - -case $ac_config_headers in *" -"*) set x $ac_config_headers; shift; ac_config_headers=$*;; -esac - - -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -# Files that config.status was made for. -config_files="$ac_config_files" -config_headers="$ac_config_headers" -config_commands="$ac_config_commands" - -_ACEOF - -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -ac_cs_usage="\ -\`$as_me' instantiates files and other configuration actions -from templates according to the current configuration. Unless the files -and actions are specified as TAGs, all are instantiated by default. - -Usage: $0 [OPTION]... [TAG]... - - -h, --help print this help, then exit - -V, --version print version number and configuration settings, then exit - --config print configuration, then exit - -q, --quiet, --silent - do not print progress messages - -d, --debug don't remove temporary files - --recheck update $as_me by reconfiguring in the same conditions - --file=FILE[:TEMPLATE] - instantiate the configuration file FILE - --header=FILE[:TEMPLATE] - instantiate the configuration header FILE - -Configuration files: -$config_files - -Configuration headers: -$config_headers - -Configuration commands: -$config_commands - -Report bugs to ." - -_ACEOF -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`" -ac_cs_version="\\ -shairport.c config.status 1.2.0 -configured by $0, generated by GNU Autoconf 2.68, - with options \\"\$ac_cs_config\\" - -Copyright (C) 2010 Free Software Foundation, Inc. -This config.status script is free software; the Free Software Foundation -gives unlimited permission to copy, distribute and modify it." - -ac_pwd='$ac_pwd' -srcdir='$srcdir' -INSTALL='$INSTALL' -MKDIR_P='$MKDIR_P' -AWK='$AWK' -test -n "\$AWK" || AWK=awk -_ACEOF - -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -# The default lists apply if the user does not specify any file. -ac_need_defaults=: -while test $# != 0 -do - case $1 in - --*=?*) - ac_option=`expr "X$1" : 'X\([^=]*\)='` - ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'` - ac_shift=: - ;; - --*=) - ac_option=`expr "X$1" : 'X\([^=]*\)='` - ac_optarg= - ac_shift=: - ;; - *) - ac_option=$1 - ac_optarg=$2 - ac_shift=shift - ;; - esac - - case $ac_option in - # Handling of the options. - -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) - ac_cs_recheck=: ;; - --version | --versio | --versi | --vers | --ver | --ve | --v | -V ) - $as_echo "$ac_cs_version"; exit ;; - --config | --confi | --conf | --con | --co | --c ) - $as_echo "$ac_cs_config"; exit ;; - --debug | --debu | --deb | --de | --d | -d ) - debug=: ;; - --file | --fil | --fi | --f ) - $ac_shift - case $ac_optarg in - *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; - '') as_fn_error $? "missing file argument" ;; - esac - as_fn_append CONFIG_FILES " '$ac_optarg'" - ac_need_defaults=false;; - --header | --heade | --head | --hea ) - $ac_shift - case $ac_optarg in - *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; - esac - as_fn_append CONFIG_HEADERS " '$ac_optarg'" - ac_need_defaults=false;; - --he | --h) - # Conflict between --help and --header - as_fn_error $? "ambiguous option: \`$1' -Try \`$0 --help' for more information.";; - --help | --hel | -h ) - $as_echo "$ac_cs_usage"; exit ;; - -q | -quiet | --quiet | --quie | --qui | --qu | --q \ - | -silent | --silent | --silen | --sile | --sil | --si | --s) - ac_cs_silent=: ;; - - # This is an error. - -*) as_fn_error $? "unrecognized option: \`$1' -Try \`$0 --help' for more information." ;; - - *) as_fn_append ac_config_targets " $1" - ac_need_defaults=false ;; - - esac - shift -done - -ac_configure_extra_args= - -if $ac_cs_silent; then - exec 6>/dev/null - ac_configure_extra_args="$ac_configure_extra_args --silent" -fi - -_ACEOF -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -if \$ac_cs_recheck; then - set X '$SHELL' '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion - shift - \$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6 - CONFIG_SHELL='$SHELL' - export CONFIG_SHELL - exec "\$@" -fi - -_ACEOF -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -exec 5>>config.log -{ - echo - sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX -## Running $as_me. ## -_ASBOX - $as_echo "$ac_log" -} >&5 - -_ACEOF -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -# -# INIT-COMMANDS -# -AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir" - - -# The HP-UX ksh and POSIX shell print the target directory to stdout -# if CDPATH is set. -(unset CDPATH) >/dev/null 2>&1 && unset CDPATH - -sed_quote_subst='$sed_quote_subst' -double_quote_subst='$double_quote_subst' -delay_variable_subst='$delay_variable_subst' -enable_static='`$ECHO "$enable_static" | $SED "$delay_single_quote_subst"`' -macro_version='`$ECHO "$macro_version" | $SED "$delay_single_quote_subst"`' -macro_revision='`$ECHO "$macro_revision" | $SED "$delay_single_quote_subst"`' -enable_shared='`$ECHO "$enable_shared" | $SED "$delay_single_quote_subst"`' -pic_mode='`$ECHO "$pic_mode" | $SED "$delay_single_quote_subst"`' -enable_fast_install='`$ECHO "$enable_fast_install" | $SED "$delay_single_quote_subst"`' -SHELL='`$ECHO "$SHELL" | $SED "$delay_single_quote_subst"`' -ECHO='`$ECHO "$ECHO" | $SED "$delay_single_quote_subst"`' -host_alias='`$ECHO "$host_alias" | $SED "$delay_single_quote_subst"`' -host='`$ECHO "$host" | $SED "$delay_single_quote_subst"`' -host_os='`$ECHO "$host_os" | $SED "$delay_single_quote_subst"`' -build_alias='`$ECHO "$build_alias" | $SED "$delay_single_quote_subst"`' -build='`$ECHO "$build" | $SED "$delay_single_quote_subst"`' -build_os='`$ECHO "$build_os" | $SED "$delay_single_quote_subst"`' -SED='`$ECHO "$SED" | $SED "$delay_single_quote_subst"`' -Xsed='`$ECHO "$Xsed" | $SED "$delay_single_quote_subst"`' -GREP='`$ECHO "$GREP" | $SED "$delay_single_quote_subst"`' -EGREP='`$ECHO "$EGREP" | $SED "$delay_single_quote_subst"`' -FGREP='`$ECHO "$FGREP" | $SED "$delay_single_quote_subst"`' -LD='`$ECHO "$LD" | $SED "$delay_single_quote_subst"`' -NM='`$ECHO "$NM" | $SED "$delay_single_quote_subst"`' -LN_S='`$ECHO "$LN_S" | $SED "$delay_single_quote_subst"`' -max_cmd_len='`$ECHO "$max_cmd_len" | $SED "$delay_single_quote_subst"`' -ac_objext='`$ECHO "$ac_objext" | $SED "$delay_single_quote_subst"`' -exeext='`$ECHO "$exeext" | $SED "$delay_single_quote_subst"`' -lt_unset='`$ECHO "$lt_unset" | $SED "$delay_single_quote_subst"`' -lt_SP2NL='`$ECHO "$lt_SP2NL" | $SED "$delay_single_quote_subst"`' -lt_NL2SP='`$ECHO "$lt_NL2SP" | $SED "$delay_single_quote_subst"`' -lt_cv_to_host_file_cmd='`$ECHO "$lt_cv_to_host_file_cmd" | $SED "$delay_single_quote_subst"`' -lt_cv_to_tool_file_cmd='`$ECHO "$lt_cv_to_tool_file_cmd" | $SED "$delay_single_quote_subst"`' -reload_flag='`$ECHO "$reload_flag" | $SED "$delay_single_quote_subst"`' -reload_cmds='`$ECHO "$reload_cmds" | $SED "$delay_single_quote_subst"`' -OBJDUMP='`$ECHO "$OBJDUMP" | $SED "$delay_single_quote_subst"`' -deplibs_check_method='`$ECHO "$deplibs_check_method" | $SED "$delay_single_quote_subst"`' -file_magic_cmd='`$ECHO "$file_magic_cmd" | $SED "$delay_single_quote_subst"`' -file_magic_glob='`$ECHO "$file_magic_glob" | $SED "$delay_single_quote_subst"`' -want_nocaseglob='`$ECHO "$want_nocaseglob" | $SED "$delay_single_quote_subst"`' -DLLTOOL='`$ECHO "$DLLTOOL" | $SED "$delay_single_quote_subst"`' -sharedlib_from_linklib_cmd='`$ECHO "$sharedlib_from_linklib_cmd" | $SED "$delay_single_quote_subst"`' -AR='`$ECHO "$AR" | $SED "$delay_single_quote_subst"`' -AR_FLAGS='`$ECHO "$AR_FLAGS" | $SED "$delay_single_quote_subst"`' -archiver_list_spec='`$ECHO "$archiver_list_spec" | $SED "$delay_single_quote_subst"`' -STRIP='`$ECHO "$STRIP" | $SED "$delay_single_quote_subst"`' -RANLIB='`$ECHO "$RANLIB" | $SED "$delay_single_quote_subst"`' -old_postinstall_cmds='`$ECHO "$old_postinstall_cmds" | $SED "$delay_single_quote_subst"`' -old_postuninstall_cmds='`$ECHO "$old_postuninstall_cmds" | $SED "$delay_single_quote_subst"`' -old_archive_cmds='`$ECHO "$old_archive_cmds" | $SED "$delay_single_quote_subst"`' -lock_old_archive_extraction='`$ECHO "$lock_old_archive_extraction" | $SED "$delay_single_quote_subst"`' -CC='`$ECHO "$CC" | $SED "$delay_single_quote_subst"`' -CFLAGS='`$ECHO "$CFLAGS" | $SED "$delay_single_quote_subst"`' -compiler='`$ECHO "$compiler" | $SED "$delay_single_quote_subst"`' -GCC='`$ECHO "$GCC" | $SED "$delay_single_quote_subst"`' -lt_cv_sys_global_symbol_pipe='`$ECHO "$lt_cv_sys_global_symbol_pipe" | $SED "$delay_single_quote_subst"`' -lt_cv_sys_global_symbol_to_cdecl='`$ECHO "$lt_cv_sys_global_symbol_to_cdecl" | $SED "$delay_single_quote_subst"`' -lt_cv_sys_global_symbol_to_c_name_address='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address" | $SED "$delay_single_quote_subst"`' -lt_cv_sys_global_symbol_to_c_name_address_lib_prefix='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address_lib_prefix" | $SED "$delay_single_quote_subst"`' -nm_file_list_spec='`$ECHO "$nm_file_list_spec" | $SED "$delay_single_quote_subst"`' -lt_sysroot='`$ECHO "$lt_sysroot" | $SED "$delay_single_quote_subst"`' -objdir='`$ECHO "$objdir" | $SED "$delay_single_quote_subst"`' -MAGIC_CMD='`$ECHO "$MAGIC_CMD" | $SED "$delay_single_quote_subst"`' -lt_prog_compiler_no_builtin_flag='`$ECHO "$lt_prog_compiler_no_builtin_flag" | $SED "$delay_single_quote_subst"`' -lt_prog_compiler_pic='`$ECHO "$lt_prog_compiler_pic" | $SED "$delay_single_quote_subst"`' -lt_prog_compiler_wl='`$ECHO "$lt_prog_compiler_wl" | $SED "$delay_single_quote_subst"`' -lt_prog_compiler_static='`$ECHO "$lt_prog_compiler_static" | $SED "$delay_single_quote_subst"`' -lt_cv_prog_compiler_c_o='`$ECHO "$lt_cv_prog_compiler_c_o" | $SED "$delay_single_quote_subst"`' -need_locks='`$ECHO "$need_locks" | $SED "$delay_single_quote_subst"`' -MANIFEST_TOOL='`$ECHO "$MANIFEST_TOOL" | $SED "$delay_single_quote_subst"`' -DSYMUTIL='`$ECHO "$DSYMUTIL" | $SED "$delay_single_quote_subst"`' -NMEDIT='`$ECHO "$NMEDIT" | $SED "$delay_single_quote_subst"`' -LIPO='`$ECHO "$LIPO" | $SED "$delay_single_quote_subst"`' -OTOOL='`$ECHO "$OTOOL" | $SED "$delay_single_quote_subst"`' -OTOOL64='`$ECHO "$OTOOL64" | $SED "$delay_single_quote_subst"`' -libext='`$ECHO "$libext" | $SED "$delay_single_quote_subst"`' -shrext_cmds='`$ECHO "$shrext_cmds" | $SED "$delay_single_quote_subst"`' -extract_expsyms_cmds='`$ECHO "$extract_expsyms_cmds" | $SED "$delay_single_quote_subst"`' -archive_cmds_need_lc='`$ECHO "$archive_cmds_need_lc" | $SED "$delay_single_quote_subst"`' -enable_shared_with_static_runtimes='`$ECHO "$enable_shared_with_static_runtimes" | $SED "$delay_single_quote_subst"`' -export_dynamic_flag_spec='`$ECHO "$export_dynamic_flag_spec" | $SED "$delay_single_quote_subst"`' -whole_archive_flag_spec='`$ECHO "$whole_archive_flag_spec" | $SED "$delay_single_quote_subst"`' -compiler_needs_object='`$ECHO "$compiler_needs_object" | $SED "$delay_single_quote_subst"`' -old_archive_from_new_cmds='`$ECHO "$old_archive_from_new_cmds" | $SED "$delay_single_quote_subst"`' -old_archive_from_expsyms_cmds='`$ECHO "$old_archive_from_expsyms_cmds" | $SED "$delay_single_quote_subst"`' -archive_cmds='`$ECHO "$archive_cmds" | $SED "$delay_single_quote_subst"`' -archive_expsym_cmds='`$ECHO "$archive_expsym_cmds" | $SED "$delay_single_quote_subst"`' -module_cmds='`$ECHO "$module_cmds" | $SED "$delay_single_quote_subst"`' -module_expsym_cmds='`$ECHO "$module_expsym_cmds" | $SED "$delay_single_quote_subst"`' -with_gnu_ld='`$ECHO "$with_gnu_ld" | $SED "$delay_single_quote_subst"`' -allow_undefined_flag='`$ECHO "$allow_undefined_flag" | $SED "$delay_single_quote_subst"`' -no_undefined_flag='`$ECHO "$no_undefined_flag" | $SED "$delay_single_quote_subst"`' -hardcode_libdir_flag_spec='`$ECHO "$hardcode_libdir_flag_spec" | $SED "$delay_single_quote_subst"`' -hardcode_libdir_flag_spec_ld='`$ECHO "$hardcode_libdir_flag_spec_ld" | $SED "$delay_single_quote_subst"`' -hardcode_libdir_separator='`$ECHO "$hardcode_libdir_separator" | $SED "$delay_single_quote_subst"`' -hardcode_direct='`$ECHO "$hardcode_direct" | $SED "$delay_single_quote_subst"`' -hardcode_direct_absolute='`$ECHO "$hardcode_direct_absolute" | $SED "$delay_single_quote_subst"`' -hardcode_minus_L='`$ECHO "$hardcode_minus_L" | $SED "$delay_single_quote_subst"`' -hardcode_shlibpath_var='`$ECHO "$hardcode_shlibpath_var" | $SED "$delay_single_quote_subst"`' -hardcode_automatic='`$ECHO "$hardcode_automatic" | $SED "$delay_single_quote_subst"`' -inherit_rpath='`$ECHO "$inherit_rpath" | $SED "$delay_single_quote_subst"`' -link_all_deplibs='`$ECHO "$link_all_deplibs" | $SED "$delay_single_quote_subst"`' -always_export_symbols='`$ECHO "$always_export_symbols" | $SED "$delay_single_quote_subst"`' -export_symbols_cmds='`$ECHO "$export_symbols_cmds" | $SED "$delay_single_quote_subst"`' -exclude_expsyms='`$ECHO "$exclude_expsyms" | $SED "$delay_single_quote_subst"`' -include_expsyms='`$ECHO "$include_expsyms" | $SED "$delay_single_quote_subst"`' -prelink_cmds='`$ECHO "$prelink_cmds" | $SED "$delay_single_quote_subst"`' -postlink_cmds='`$ECHO "$postlink_cmds" | $SED "$delay_single_quote_subst"`' -file_list_spec='`$ECHO "$file_list_spec" | $SED "$delay_single_quote_subst"`' -variables_saved_for_relink='`$ECHO "$variables_saved_for_relink" | $SED "$delay_single_quote_subst"`' -need_lib_prefix='`$ECHO "$need_lib_prefix" | $SED "$delay_single_quote_subst"`' -need_version='`$ECHO "$need_version" | $SED "$delay_single_quote_subst"`' -version_type='`$ECHO "$version_type" | $SED "$delay_single_quote_subst"`' -runpath_var='`$ECHO "$runpath_var" | $SED "$delay_single_quote_subst"`' -shlibpath_var='`$ECHO "$shlibpath_var" | $SED "$delay_single_quote_subst"`' -shlibpath_overrides_runpath='`$ECHO "$shlibpath_overrides_runpath" | $SED "$delay_single_quote_subst"`' -libname_spec='`$ECHO "$libname_spec" | $SED "$delay_single_quote_subst"`' -library_names_spec='`$ECHO "$library_names_spec" | $SED "$delay_single_quote_subst"`' -soname_spec='`$ECHO "$soname_spec" | $SED "$delay_single_quote_subst"`' -install_override_mode='`$ECHO "$install_override_mode" | $SED "$delay_single_quote_subst"`' -postinstall_cmds='`$ECHO "$postinstall_cmds" | $SED "$delay_single_quote_subst"`' -postuninstall_cmds='`$ECHO "$postuninstall_cmds" | $SED "$delay_single_quote_subst"`' -finish_cmds='`$ECHO "$finish_cmds" | $SED "$delay_single_quote_subst"`' -finish_eval='`$ECHO "$finish_eval" | $SED "$delay_single_quote_subst"`' -hardcode_into_libs='`$ECHO "$hardcode_into_libs" | $SED "$delay_single_quote_subst"`' -sys_lib_search_path_spec='`$ECHO "$sys_lib_search_path_spec" | $SED "$delay_single_quote_subst"`' -sys_lib_dlsearch_path_spec='`$ECHO "$sys_lib_dlsearch_path_spec" | $SED "$delay_single_quote_subst"`' -hardcode_action='`$ECHO "$hardcode_action" | $SED "$delay_single_quote_subst"`' -enable_dlopen='`$ECHO "$enable_dlopen" | $SED "$delay_single_quote_subst"`' -enable_dlopen_self='`$ECHO "$enable_dlopen_self" | $SED "$delay_single_quote_subst"`' -enable_dlopen_self_static='`$ECHO "$enable_dlopen_self_static" | $SED "$delay_single_quote_subst"`' -old_striplib='`$ECHO "$old_striplib" | $SED "$delay_single_quote_subst"`' -striplib='`$ECHO "$striplib" | $SED "$delay_single_quote_subst"`' - -LTCC='$LTCC' -LTCFLAGS='$LTCFLAGS' -compiler='$compiler_DEFAULT' - -# A function that is used when there is no print builtin or printf. -func_fallback_echo () -{ - eval 'cat <<_LTECHO_EOF -\$1 -_LTECHO_EOF' -} - -# Quote evaled strings. -for var in SHELL \ -ECHO \ -SED \ -GREP \ -EGREP \ -FGREP \ -LD \ -NM \ -LN_S \ -lt_SP2NL \ -lt_NL2SP \ -reload_flag \ -OBJDUMP \ -deplibs_check_method \ -file_magic_cmd \ -file_magic_glob \ -want_nocaseglob \ -DLLTOOL \ -sharedlib_from_linklib_cmd \ -AR \ -AR_FLAGS \ -archiver_list_spec \ -STRIP \ -RANLIB \ -CC \ -CFLAGS \ -compiler \ -lt_cv_sys_global_symbol_pipe \ -lt_cv_sys_global_symbol_to_cdecl \ -lt_cv_sys_global_symbol_to_c_name_address \ -lt_cv_sys_global_symbol_to_c_name_address_lib_prefix \ -nm_file_list_spec \ -lt_prog_compiler_no_builtin_flag \ -lt_prog_compiler_pic \ -lt_prog_compiler_wl \ -lt_prog_compiler_static \ -lt_cv_prog_compiler_c_o \ -need_locks \ -MANIFEST_TOOL \ -DSYMUTIL \ -NMEDIT \ -LIPO \ -OTOOL \ -OTOOL64 \ -shrext_cmds \ -export_dynamic_flag_spec \ -whole_archive_flag_spec \ -compiler_needs_object \ -with_gnu_ld \ -allow_undefined_flag \ -no_undefined_flag \ -hardcode_libdir_flag_spec \ -hardcode_libdir_flag_spec_ld \ -hardcode_libdir_separator \ -exclude_expsyms \ -include_expsyms \ -file_list_spec \ -variables_saved_for_relink \ -libname_spec \ -library_names_spec \ -soname_spec \ -install_override_mode \ -finish_eval \ -old_striplib \ -striplib; do - case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in - *[\\\\\\\`\\"\\\$]*) - eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED \\"\\\$sed_quote_subst\\"\\\`\\\\\\"" - ;; - *) - eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\"" - ;; - esac -done - -# Double-quote double-evaled strings. -for var in reload_cmds \ -old_postinstall_cmds \ -old_postuninstall_cmds \ -old_archive_cmds \ -extract_expsyms_cmds \ -old_archive_from_new_cmds \ -old_archive_from_expsyms_cmds \ -archive_cmds \ -archive_expsym_cmds \ -module_cmds \ -module_expsym_cmds \ -export_symbols_cmds \ -prelink_cmds \ -postlink_cmds \ -postinstall_cmds \ -postuninstall_cmds \ -finish_cmds \ -sys_lib_search_path_spec \ -sys_lib_dlsearch_path_spec; do - case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in - *[\\\\\\\`\\"\\\$]*) - eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\"" - ;; - *) - eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\"" - ;; - esac -done - -ac_aux_dir='$ac_aux_dir' -xsi_shell='$xsi_shell' -lt_shell_append='$lt_shell_append' - -# See if we are running on zsh, and set the options which allow our -# commands through without removal of \ escapes INIT. -if test -n "\${ZSH_VERSION+set}" ; then - setopt NO_GLOB_SUBST -fi - - - PACKAGE='$PACKAGE' - VERSION='$VERSION' - TIMESTAMP='$TIMESTAMP' - RM='$RM' - ofile='$ofile' - -ac_aux_dir='$ac_aux_dir' - - - -_ACEOF - -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 - -# Handling of arguments. -for ac_config_target in $ac_config_targets -do - case $ac_config_target in - "config.h") CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;; - "depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;; - "libtool") CONFIG_COMMANDS="$CONFIG_COMMANDS libtool" ;; - "${OUTPUT_FILES}") CONFIG_FILES="$CONFIG_FILES ${OUTPUT_FILES}" ;; - "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;; - "src/Makefile") CONFIG_FILES="$CONFIG_FILES src/Makefile" ;; - - *) as_fn_error $? "invalid argument: \`$ac_config_target'" "$LINENO" 5;; - esac -done - - -# If the user did not use the arguments to specify the items to instantiate, -# then the envvar interface is used. Set only those that are not. -# We use the long form for the default assignment because of an extremely -# bizarre bug on SunOS 4.1.3. -if $ac_need_defaults; then - test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files - test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers - test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands -fi - -# Have a temporary directory for convenience. Make it in the build tree -# simply because there is no reason against having it here, and in addition, -# creating and moving files from /tmp can sometimes cause problems. -# Hook for its removal unless debugging. -# Note that there is a small window in which the directory will not be cleaned: -# after its creation but before its name has been assigned to `$tmp'. -$debug || -{ - tmp= ac_tmp= - trap 'exit_status=$? - : "${ac_tmp:=$tmp}" - { test ! -d "$ac_tmp" || rm -fr "$ac_tmp"; } && exit $exit_status -' 0 - trap 'as_fn_exit 1' 1 2 13 15 -} -# Create a (secure) tmp directory for tmp files. - -{ - tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` && - test -d "$tmp" -} || -{ - tmp=./conf$$-$RANDOM - (umask 077 && mkdir "$tmp") -} || as_fn_error $? "cannot create a temporary directory in ." "$LINENO" 5 -ac_tmp=$tmp - -# Set up the scripts for CONFIG_FILES section. -# No need to generate them if there are no CONFIG_FILES. -# This happens for instance with `./config.status config.h'. -if test -n "$CONFIG_FILES"; then - - -ac_cr=`echo X | tr X '\015'` -# On cygwin, bash can eat \r inside `` if the user requested igncr. -# But we know of no other shell where ac_cr would be empty at this -# point, so we can use a bashism as a fallback. -if test "x$ac_cr" = x; then - eval ac_cr=\$\'\\r\' -fi -ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' /dev/null` -if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then - ac_cs_awk_cr='\\r' -else - ac_cs_awk_cr=$ac_cr -fi - -echo 'BEGIN {' >"$ac_tmp/subs1.awk" && -_ACEOF - - -{ - echo "cat >conf$$subs.awk <<_ACEOF" && - echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' && - echo "_ACEOF" -} >conf$$subs.sh || - as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 -ac_delim_num=`echo "$ac_subst_vars" | grep -c '^'` -ac_delim='%!_!# ' -for ac_last_try in false false false false false :; do - . ./conf$$subs.sh || - as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 - - ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X` - if test $ac_delim_n = $ac_delim_num; then - break - elif $ac_last_try; then - as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5 - else - ac_delim="$ac_delim!$ac_delim _$ac_delim!! " - fi -done -rm -f conf$$subs.sh - -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -cat >>"\$ac_tmp/subs1.awk" <<\\_ACAWK && -_ACEOF -sed -n ' -h -s/^/S["/; s/!.*/"]=/ -p -g -s/^[^!]*!// -:repl -t repl -s/'"$ac_delim"'$// -t delim -:nl -h -s/\(.\{148\}\)..*/\1/ -t more1 -s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/ -p -n -b repl -:more1 -s/["\\]/\\&/g; s/^/"/; s/$/"\\/ -p -g -s/.\{148\}// -t nl -:delim -h -s/\(.\{148\}\)..*/\1/ -t more2 -s/["\\]/\\&/g; s/^/"/; s/$/"/ -p -b -:more2 -s/["\\]/\\&/g; s/^/"/; s/$/"\\/ -p -g -s/.\{148\}// -t delim -' >$CONFIG_STATUS || ac_write_fail=1 -rm -f conf$$subs.awk -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -_ACAWK -cat >>"\$ac_tmp/subs1.awk" <<_ACAWK && - for (key in S) S_is_set[key] = 1 - FS = "" - -} -{ - line = $ 0 - nfields = split(line, field, "@") - substed = 0 - len = length(field[1]) - for (i = 2; i < nfields; i++) { - key = field[i] - keylen = length(key) - if (S_is_set[key]) { - value = S[key] - line = substr(line, 1, len) "" value "" substr(line, len + keylen + 3) - len += length(value) + length(field[++i]) - substed = 1 - } else - len += 1 + keylen - } - - print line -} - -_ACAWK -_ACEOF -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then - sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g" -else - cat -fi < "$ac_tmp/subs1.awk" > "$ac_tmp/subs.awk" \ - || as_fn_error $? "could not setup config files machinery" "$LINENO" 5 -_ACEOF - -# VPATH may cause trouble with some makes, so we remove sole $(srcdir), -# ${srcdir} and @srcdir@ entries from VPATH if srcdir is ".", strip leading and -# trailing colons and then remove the whole line if VPATH becomes empty -# (actually we leave an empty line to preserve line numbers). -if test "x$srcdir" = x.; then - ac_vpsub='/^[ ]*VPATH[ ]*=[ ]*/{ -h -s/// -s/^/:/ -s/[ ]*$/:/ -s/:\$(srcdir):/:/g -s/:\${srcdir}:/:/g -s/:@srcdir@:/:/g -s/^:*// -s/:*$// -x -s/\(=[ ]*\).*/\1/ -G -s/\n// -s/^[^=]*=[ ]*$// -}' -fi - -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -fi # test -n "$CONFIG_FILES" - -# Set up the scripts for CONFIG_HEADERS section. -# No need to generate them if there are no CONFIG_HEADERS. -# This happens for instance with `./config.status Makefile'. -if test -n "$CONFIG_HEADERS"; then -cat >"$ac_tmp/defines.awk" <<\_ACAWK || -BEGIN { -_ACEOF - -# Transform confdefs.h into an awk script `defines.awk', embedded as -# here-document in config.status, that substitutes the proper values into -# config.h.in to produce config.h. - -# Create a delimiter string that does not exist in confdefs.h, to ease -# handling of long lines. -ac_delim='%!_!# ' -for ac_last_try in false false :; do - ac_tt=`sed -n "/$ac_delim/p" confdefs.h` - if test -z "$ac_tt"; then - break - elif $ac_last_try; then - as_fn_error $? "could not make $CONFIG_HEADERS" "$LINENO" 5 - else - ac_delim="$ac_delim!$ac_delim _$ac_delim!! " - fi -done - -# For the awk script, D is an array of macro values keyed by name, -# likewise P contains macro parameters if any. Preserve backslash -# newline sequences. - -ac_word_re=[_$as_cr_Letters][_$as_cr_alnum]* -sed -n ' -s/.\{148\}/&'"$ac_delim"'/g -t rset -:rset -s/^[ ]*#[ ]*define[ ][ ]*/ / -t def -d -:def -s/\\$// -t bsnl -s/["\\]/\\&/g -s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\ -D["\1"]=" \3"/p -s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2"/p -d -:bsnl -s/["\\]/\\&/g -s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\ -D["\1"]=" \3\\\\\\n"\\/p -t cont -s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2\\\\\\n"\\/p -t cont -d -:cont -n -s/.\{148\}/&'"$ac_delim"'/g -t clear -:clear -s/\\$// -t bsnlc -s/["\\]/\\&/g; s/^/"/; s/$/"/p -d -:bsnlc -s/["\\]/\\&/g; s/^/"/; s/$/\\\\\\n"\\/p -b cont -' >$CONFIG_STATUS || ac_write_fail=1 - -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 - for (key in D) D_is_set[key] = 1 - FS = "" -} -/^[\t ]*#[\t ]*(define|undef)[\t ]+$ac_word_re([\t (]|\$)/ { - line = \$ 0 - split(line, arg, " ") - if (arg[1] == "#") { - defundef = arg[2] - mac1 = arg[3] - } else { - defundef = substr(arg[1], 2) - mac1 = arg[2] - } - split(mac1, mac2, "(") #) - macro = mac2[1] - prefix = substr(line, 1, index(line, defundef) - 1) - if (D_is_set[macro]) { - # Preserve the white space surrounding the "#". - print prefix "define", macro P[macro] D[macro] - next - } else { - # Replace #undef with comments. This is necessary, for example, - # in the case of _POSIX_SOURCE, which is predefined and required - # on some systems where configure will not decide to define it. - if (defundef == "undef") { - print "/*", prefix defundef, macro, "*/" - next - } - } -} -{ print } -_ACAWK -_ACEOF -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 - as_fn_error $? "could not setup config headers machinery" "$LINENO" 5 -fi # test -n "$CONFIG_HEADERS" - - -eval set X " :F $CONFIG_FILES :H $CONFIG_HEADERS :C $CONFIG_COMMANDS" -shift -for ac_tag -do - case $ac_tag in - :[FHLC]) ac_mode=$ac_tag; continue;; - esac - case $ac_mode$ac_tag in - :[FHL]*:*);; - :L* | :C*:*) as_fn_error $? "invalid tag \`$ac_tag'" "$LINENO" 5;; - :[FH]-) ac_tag=-:-;; - :[FH]*) ac_tag=$ac_tag:$ac_tag.in;; - esac - ac_save_IFS=$IFS - IFS=: - set x $ac_tag - IFS=$ac_save_IFS - shift - ac_file=$1 - shift - - case $ac_mode in - :L) ac_source=$1;; - :[FH]) - ac_file_inputs= - for ac_f - do - case $ac_f in - -) ac_f="$ac_tmp/stdin";; - *) # Look for the file first in the build tree, then in the source tree - # (if the path is not absolute). The absolute path cannot be DOS-style, - # because $ac_f cannot contain `:'. - test -f "$ac_f" || - case $ac_f in - [\\/$]*) false;; - *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";; - esac || - as_fn_error 1 "cannot find input file: \`$ac_f'" "$LINENO" 5;; - esac - case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac - as_fn_append ac_file_inputs " '$ac_f'" - done - - # Let's still pretend it is `configure' which instantiates (i.e., don't - # use $as_me), people would be surprised to read: - # /* config.h. Generated by config.status. */ - configure_input='Generated from '` - $as_echo "$*" | sed 's|^[^:]*/||;s|:[^:]*/|, |g' - `' by configure.' - if test x"$ac_file" != x-; then - configure_input="$ac_file. $configure_input" - { $as_echo "$as_me:${as_lineno-$LINENO}: creating $ac_file" >&5 -$as_echo "$as_me: creating $ac_file" >&6;} - fi - # Neutralize special characters interpreted by sed in replacement strings. - case $configure_input in #( - *\&* | *\|* | *\\* ) - ac_sed_conf_input=`$as_echo "$configure_input" | - sed 's/[\\\\&|]/\\\\&/g'`;; #( - *) ac_sed_conf_input=$configure_input;; - esac - - case $ac_tag in - *:-:* | *:-) cat >"$ac_tmp/stdin" \ - || as_fn_error $? "could not create $ac_file" "$LINENO" 5 ;; - esac - ;; - esac - - ac_dir=`$as_dirname -- "$ac_file" || -$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$ac_file" : 'X\(//\)[^/]' \| \ - X"$ac_file" : 'X\(//\)$' \| \ - X"$ac_file" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X"$ac_file" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - as_dir="$ac_dir"; as_fn_mkdir_p - ac_builddir=. - -case "$ac_dir" in -.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; -*) - ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'` - # A ".." for each directory in $ac_dir_suffix. - ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` - case $ac_top_builddir_sub in - "") ac_top_builddir_sub=. ac_top_build_prefix= ;; - *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; - esac ;; -esac -ac_abs_top_builddir=$ac_pwd -ac_abs_builddir=$ac_pwd$ac_dir_suffix -# for backward compatibility: -ac_top_builddir=$ac_top_build_prefix - -case $srcdir in - .) # We are building in place. - ac_srcdir=. - ac_top_srcdir=$ac_top_builddir_sub - ac_abs_top_srcdir=$ac_pwd ;; - [\\/]* | ?:[\\/]* ) # Absolute name. - ac_srcdir=$srcdir$ac_dir_suffix; - ac_top_srcdir=$srcdir - ac_abs_top_srcdir=$srcdir ;; - *) # Relative name. - ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix - ac_top_srcdir=$ac_top_build_prefix$srcdir - ac_abs_top_srcdir=$ac_pwd/$srcdir ;; -esac -ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix - - - case $ac_mode in - :F) - # - # CONFIG_FILE - # - - case $INSTALL in - [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;; - *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;; - esac - ac_MKDIR_P=$MKDIR_P - case $MKDIR_P in - [\\/$]* | ?:[\\/]* ) ;; - */*) ac_MKDIR_P=$ac_top_build_prefix$MKDIR_P ;; - esac -_ACEOF - -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -# If the template does not know about datarootdir, expand it. -# FIXME: This hack should be removed a few years after 2.60. -ac_datarootdir_hack=; ac_datarootdir_seen= -ac_sed_dataroot=' -/datarootdir/ { - p - q -} -/@datadir@/p -/@docdir@/p -/@infodir@/p -/@localedir@/p -/@mandir@/p' -case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in -*datarootdir*) ac_datarootdir_seen=yes;; -*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*) - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5 -$as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;} -_ACEOF -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 - ac_datarootdir_hack=' - s&@datadir@&$datadir&g - s&@docdir@&$docdir&g - s&@infodir@&$infodir&g - s&@localedir@&$localedir&g - s&@mandir@&$mandir&g - s&\\\${datarootdir}&$datarootdir&g' ;; -esac -_ACEOF - -# Neutralize VPATH when `$srcdir' = `.'. -# Shell code in configure.ac might set extrasub. -# FIXME: do we really want to maintain this feature? -cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 -ac_sed_extra="$ac_vpsub -$extrasub -_ACEOF -cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 -:t -/@[a-zA-Z_][a-zA-Z_0-9]*@/!b -s|@configure_input@|$ac_sed_conf_input|;t t -s&@top_builddir@&$ac_top_builddir_sub&;t t -s&@top_build_prefix@&$ac_top_build_prefix&;t t -s&@srcdir@&$ac_srcdir&;t t -s&@abs_srcdir@&$ac_abs_srcdir&;t t -s&@top_srcdir@&$ac_top_srcdir&;t t -s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t -s&@builddir@&$ac_builddir&;t t -s&@abs_builddir@&$ac_abs_builddir&;t t -s&@abs_top_builddir@&$ac_abs_top_builddir&;t t -s&@INSTALL@&$ac_INSTALL&;t t -s&@MKDIR_P@&$ac_MKDIR_P&;t t -$ac_datarootdir_hack -" -eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$ac_tmp/subs.awk" \ - >$ac_tmp/out || as_fn_error $? "could not create $ac_file" "$LINENO" 5 - -test -z "$ac_datarootdir_hack$ac_datarootdir_seen" && - { ac_out=`sed -n '/\${datarootdir}/p' "$ac_tmp/out"`; test -n "$ac_out"; } && - { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' \ - "$ac_tmp/out"`; test -z "$ac_out"; } && - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a reference to the variable \`datarootdir' -which seems to be undefined. Please make sure it is defined" >&5 -$as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir' -which seems to be undefined. Please make sure it is defined" >&2;} - - rm -f "$ac_tmp/stdin" - case $ac_file in - -) cat "$ac_tmp/out" && rm -f "$ac_tmp/out";; - *) rm -f "$ac_file" && mv "$ac_tmp/out" "$ac_file";; - esac \ - || as_fn_error $? "could not create $ac_file" "$LINENO" 5 - ;; - :H) - # - # CONFIG_HEADER - # - if test x"$ac_file" != x-; then - { - $as_echo "/* $configure_input */" \ - && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs" - } >"$ac_tmp/config.h" \ - || as_fn_error $? "could not create $ac_file" "$LINENO" 5 - if diff "$ac_file" "$ac_tmp/config.h" >/dev/null 2>&1; then - { $as_echo "$as_me:${as_lineno-$LINENO}: $ac_file is unchanged" >&5 -$as_echo "$as_me: $ac_file is unchanged" >&6;} - else - rm -f "$ac_file" - mv "$ac_tmp/config.h" "$ac_file" \ - || as_fn_error $? "could not create $ac_file" "$LINENO" 5 - fi - else - $as_echo "/* $configure_input */" \ - && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs" \ - || as_fn_error $? "could not create -" "$LINENO" 5 - fi -# Compute "$ac_file"'s index in $config_headers. -_am_arg="$ac_file" -_am_stamp_count=1 -for _am_header in $config_headers :; do - case $_am_header in - $_am_arg | $_am_arg:* ) - break ;; - * ) - _am_stamp_count=`expr $_am_stamp_count + 1` ;; - esac -done -echo "timestamp for $_am_arg" >`$as_dirname -- "$_am_arg" || -$as_expr X"$_am_arg" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$_am_arg" : 'X\(//\)[^/]' \| \ - X"$_am_arg" : 'X\(//\)$' \| \ - X"$_am_arg" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X"$_am_arg" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'`/stamp-h$_am_stamp_count - ;; - - :C) { $as_echo "$as_me:${as_lineno-$LINENO}: executing $ac_file commands" >&5 -$as_echo "$as_me: executing $ac_file commands" >&6;} - ;; - esac - - - case $ac_file$ac_mode in - "depfiles":C) test x"$AMDEP_TRUE" != x"" || { - # Autoconf 2.62 quotes --file arguments for eval, but not when files - # are listed without --file. Let's play safe and only enable the eval - # if we detect the quoting. - case $CONFIG_FILES in - *\'*) eval set x "$CONFIG_FILES" ;; - *) set x $CONFIG_FILES ;; - esac - shift - for mf - do - # Strip MF so we end up with the name of the file. - mf=`echo "$mf" | sed -e 's/:.*$//'` - # Check whether this is an Automake generated Makefile or not. - # We used to match only the files named `Makefile.in', but - # some people rename them; so instead we look at the file content. - # Grep'ing the first line is not enough: some people post-process - # each Makefile.in and add a new line on top of each file to say so. - # Grep'ing the whole file is not good either: AIX grep has a line - # limit of 2048, but all sed's we know have understand at least 4000. - if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then - dirpart=`$as_dirname -- "$mf" || -$as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$mf" : 'X\(//\)[^/]' \| \ - X"$mf" : 'X\(//\)$' \| \ - X"$mf" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X"$mf" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - else - continue - fi - # Extract the definition of DEPDIR, am__include, and am__quote - # from the Makefile without running `make'. - DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` - test -z "$DEPDIR" && continue - am__include=`sed -n 's/^am__include = //p' < "$mf"` - test -z "am__include" && continue - am__quote=`sed -n 's/^am__quote = //p' < "$mf"` - # When using ansi2knr, U may be empty or an underscore; expand it - U=`sed -n 's/^U = //p' < "$mf"` - # Find all dependency output files, they are included files with - # $(DEPDIR) in their names. We invoke sed twice because it is the - # simplest approach to changing $(DEPDIR) to its actual value in the - # expansion. - for file in `sed -n " - s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ - sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do - # Make sure the directory exists. - test -f "$dirpart/$file" && continue - fdir=`$as_dirname -- "$file" || -$as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$file" : 'X\(//\)[^/]' \| \ - X"$file" : 'X\(//\)$' \| \ - X"$file" : 'X\(/\)' \| . 2>/dev/null || -$as_echo X"$file" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q'` - as_dir=$dirpart/$fdir; as_fn_mkdir_p - # echo "creating $dirpart/$file" - echo '# dummy' > "$dirpart/$file" - done - done -} - ;; - "libtool":C) - - # See if we are running on zsh, and set the options which allow our - # commands through without removal of \ escapes. - if test -n "${ZSH_VERSION+set}" ; then - setopt NO_GLOB_SUBST - fi - - cfgfile="${ofile}T" - trap "$RM \"$cfgfile\"; exit 1" 1 2 15 - $RM "$cfgfile" - - cat <<_LT_EOF >> "$cfgfile" -#! $SHELL - -# `$ECHO "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services. -# Generated automatically by $as_me ($PACKAGE$TIMESTAMP) $VERSION -# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: -# NOTE: Changes made to this file will be lost: look at ltmain.sh. -# -# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, -# 2006, 2007, 2008, 2009, 2010 Free Software Foundation, -# Inc. -# Written by Gordon Matzigkeit, 1996 -# -# This file is part of GNU Libtool. -# -# GNU Libtool is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# As a special exception to the GNU General Public License, -# if you distribute this file as part of a program or library that -# is built using GNU Libtool, you may include this file under the -# same distribution terms that you use for the rest of that program. -# -# GNU Libtool is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with GNU Libtool; see the file COPYING. If not, a copy -# can be downloaded from http://www.gnu.org/licenses/gpl.html, or -# obtained by writing to the Free Software Foundation, Inc., -# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. - - -# The names of the tagged configurations supported by this script. -available_tags="" - -# ### BEGIN LIBTOOL CONFIG - -# Whether or not to build static libraries. -build_old_libs=$enable_static - -# Which release of libtool.m4 was used? -macro_version=$macro_version -macro_revision=$macro_revision - -# Whether or not to build shared libraries. -build_libtool_libs=$enable_shared - -# What type of objects to build. -pic_mode=$pic_mode - -# Whether or not to optimize for fast installation. -fast_install=$enable_fast_install - -# Shell to use when invoking shell scripts. -SHELL=$lt_SHELL - -# An echo program that protects backslashes. -ECHO=$lt_ECHO - -# The host system. -host_alias=$host_alias -host=$host -host_os=$host_os - -# The build system. -build_alias=$build_alias -build=$build -build_os=$build_os - -# A sed program that does not truncate output. -SED=$lt_SED - -# Sed that helps us avoid accidentally triggering echo(1) options like -n. -Xsed="\$SED -e 1s/^X//" - -# A grep program that handles long lines. -GREP=$lt_GREP - -# An ERE matcher. -EGREP=$lt_EGREP - -# A literal string matcher. -FGREP=$lt_FGREP - -# A BSD- or MS-compatible name lister. -NM=$lt_NM - -# Whether we need soft or hard links. -LN_S=$lt_LN_S - -# What is the maximum length of a command? -max_cmd_len=$max_cmd_len - -# Object file suffix (normally "o"). -objext=$ac_objext - -# Executable file suffix (normally ""). -exeext=$exeext - -# whether the shell understands "unset". -lt_unset=$lt_unset - -# turn spaces into newlines. -SP2NL=$lt_lt_SP2NL - -# turn newlines into spaces. -NL2SP=$lt_lt_NL2SP - -# convert \$build file names to \$host format. -to_host_file_cmd=$lt_cv_to_host_file_cmd - -# convert \$build files to toolchain format. -to_tool_file_cmd=$lt_cv_to_tool_file_cmd - -# An object symbol dumper. -OBJDUMP=$lt_OBJDUMP - -# Method to check whether dependent libraries are shared objects. -deplibs_check_method=$lt_deplibs_check_method - -# Command to use when deplibs_check_method = "file_magic". -file_magic_cmd=$lt_file_magic_cmd - -# How to find potential files when deplibs_check_method = "file_magic". -file_magic_glob=$lt_file_magic_glob - -# Find potential files using nocaseglob when deplibs_check_method = "file_magic". -want_nocaseglob=$lt_want_nocaseglob - -# DLL creation program. -DLLTOOL=$lt_DLLTOOL - -# Command to associate shared and link libraries. -sharedlib_from_linklib_cmd=$lt_sharedlib_from_linklib_cmd - -# The archiver. -AR=$lt_AR - -# Flags to create an archive. -AR_FLAGS=$lt_AR_FLAGS - -# How to feed a file listing to the archiver. -archiver_list_spec=$lt_archiver_list_spec - -# A symbol stripping program. -STRIP=$lt_STRIP - -# Commands used to install an old-style archive. -RANLIB=$lt_RANLIB -old_postinstall_cmds=$lt_old_postinstall_cmds -old_postuninstall_cmds=$lt_old_postuninstall_cmds - -# Whether to use a lock for old archive extraction. -lock_old_archive_extraction=$lock_old_archive_extraction - -# A C compiler. -LTCC=$lt_CC - -# LTCC compiler flags. -LTCFLAGS=$lt_CFLAGS - -# Take the output of nm and produce a listing of raw symbols and C names. -global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe - -# Transform the output of nm in a proper C declaration. -global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl - -# Transform the output of nm in a C name address pair. -global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address - -# Transform the output of nm in a C name address pair when lib prefix is needed. -global_symbol_to_c_name_address_lib_prefix=$lt_lt_cv_sys_global_symbol_to_c_name_address_lib_prefix - -# Specify filename containing input files for \$NM. -nm_file_list_spec=$lt_nm_file_list_spec - -# The root where to search for dependent libraries,and in which our libraries should be installed. -lt_sysroot=$lt_sysroot - -# The name of the directory that contains temporary libtool files. -objdir=$objdir - -# Used to examine libraries when file_magic_cmd begins with "file". -MAGIC_CMD=$MAGIC_CMD - -# Must we lock files when doing compilation? -need_locks=$lt_need_locks - -# Manifest tool. -MANIFEST_TOOL=$lt_MANIFEST_TOOL - -# Tool to manipulate archived DWARF debug symbol files on Mac OS X. -DSYMUTIL=$lt_DSYMUTIL - -# Tool to change global to local symbols on Mac OS X. -NMEDIT=$lt_NMEDIT - -# Tool to manipulate fat objects and archives on Mac OS X. -LIPO=$lt_LIPO - -# ldd/readelf like tool for Mach-O binaries on Mac OS X. -OTOOL=$lt_OTOOL - -# ldd/readelf like tool for 64 bit Mach-O binaries on Mac OS X 10.4. -OTOOL64=$lt_OTOOL64 - -# Old archive suffix (normally "a"). -libext=$libext - -# Shared library suffix (normally ".so"). -shrext_cmds=$lt_shrext_cmds - -# The commands to extract the exported symbol list from a shared archive. -extract_expsyms_cmds=$lt_extract_expsyms_cmds - -# Variables whose values should be saved in libtool wrapper scripts and -# restored at link time. -variables_saved_for_relink=$lt_variables_saved_for_relink - -# Do we need the "lib" prefix for modules? -need_lib_prefix=$need_lib_prefix - -# Do we need a version for libraries? -need_version=$need_version - -# Library versioning type. -version_type=$version_type - -# Shared library runtime path variable. -runpath_var=$runpath_var - -# Shared library path variable. -shlibpath_var=$shlibpath_var - -# Is shlibpath searched before the hard-coded library search path? -shlibpath_overrides_runpath=$shlibpath_overrides_runpath - -# Format of library name prefix. -libname_spec=$lt_libname_spec - -# List of archive names. First name is the real one, the rest are links. -# The last name is the one that the linker finds with -lNAME -library_names_spec=$lt_library_names_spec - -# The coded name of the library, if different from the real name. -soname_spec=$lt_soname_spec - -# Permission mode override for installation of shared libraries. -install_override_mode=$lt_install_override_mode - -# Command to use after installation of a shared archive. -postinstall_cmds=$lt_postinstall_cmds - -# Command to use after uninstallation of a shared archive. -postuninstall_cmds=$lt_postuninstall_cmds - -# Commands used to finish a libtool library installation in a directory. -finish_cmds=$lt_finish_cmds - -# As "finish_cmds", except a single script fragment to be evaled but -# not shown. -finish_eval=$lt_finish_eval - -# Whether we should hardcode library paths into libraries. -hardcode_into_libs=$hardcode_into_libs - -# Compile-time system search path for libraries. -sys_lib_search_path_spec=$lt_sys_lib_search_path_spec - -# Run-time system search path for libraries. -sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec - -# Whether dlopen is supported. -dlopen_support=$enable_dlopen - -# Whether dlopen of programs is supported. -dlopen_self=$enable_dlopen_self - -# Whether dlopen of statically linked programs is supported. -dlopen_self_static=$enable_dlopen_self_static - -# Commands to strip libraries. -old_striplib=$lt_old_striplib -striplib=$lt_striplib - - -# The linker used to build libraries. -LD=$lt_LD - -# How to create reloadable object files. -reload_flag=$lt_reload_flag -reload_cmds=$lt_reload_cmds - -# Commands used to build an old-style archive. -old_archive_cmds=$lt_old_archive_cmds - -# A language specific compiler. -CC=$lt_compiler - -# Is the compiler the GNU compiler? -with_gcc=$GCC - -# Compiler flag to turn off builtin functions. -no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag - -# Additional compiler flags for building library objects. -pic_flag=$lt_lt_prog_compiler_pic - -# How to pass a linker flag through the compiler. -wl=$lt_lt_prog_compiler_wl - -# Compiler flag to prevent dynamic linking. -link_static_flag=$lt_lt_prog_compiler_static - -# Does compiler simultaneously support -c and -o options? -compiler_c_o=$lt_lt_cv_prog_compiler_c_o - -# Whether or not to add -lc for building shared libraries. -build_libtool_need_lc=$archive_cmds_need_lc - -# Whether or not to disallow shared libs when runtime libs are static. -allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes - -# Compiler flag to allow reflexive dlopens. -export_dynamic_flag_spec=$lt_export_dynamic_flag_spec - -# Compiler flag to generate shared objects directly from archives. -whole_archive_flag_spec=$lt_whole_archive_flag_spec - -# Whether the compiler copes with passing no objects directly. -compiler_needs_object=$lt_compiler_needs_object - -# Create an old-style archive from a shared archive. -old_archive_from_new_cmds=$lt_old_archive_from_new_cmds - -# Create a temporary old-style archive to link instead of a shared archive. -old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds - -# Commands used to build a shared archive. -archive_cmds=$lt_archive_cmds -archive_expsym_cmds=$lt_archive_expsym_cmds - -# Commands used to build a loadable module if different from building -# a shared archive. -module_cmds=$lt_module_cmds -module_expsym_cmds=$lt_module_expsym_cmds - -# Whether we are building with GNU ld or not. -with_gnu_ld=$lt_with_gnu_ld - -# Flag that allows shared libraries with undefined symbols to be built. -allow_undefined_flag=$lt_allow_undefined_flag - -# Flag that enforces no undefined symbols. -no_undefined_flag=$lt_no_undefined_flag - -# Flag to hardcode \$libdir into a binary during linking. -# This must work even if \$libdir does not exist -hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec - -# If ld is used when linking, flag to hardcode \$libdir into a binary -# during linking. This must work even if \$libdir does not exist. -hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld - -# Whether we need a single "-rpath" flag with a separated argument. -hardcode_libdir_separator=$lt_hardcode_libdir_separator - -# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes -# DIR into the resulting binary. -hardcode_direct=$hardcode_direct - -# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes -# DIR into the resulting binary and the resulting library dependency is -# "absolute",i.e impossible to change by setting \${shlibpath_var} if the -# library is relocated. -hardcode_direct_absolute=$hardcode_direct_absolute - -# Set to "yes" if using the -LDIR flag during linking hardcodes DIR -# into the resulting binary. -hardcode_minus_L=$hardcode_minus_L - -# Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR -# into the resulting binary. -hardcode_shlibpath_var=$hardcode_shlibpath_var - -# Set to "yes" if building a shared library automatically hardcodes DIR -# into the library and all subsequent libraries and executables linked -# against it. -hardcode_automatic=$hardcode_automatic - -# Set to yes if linker adds runtime paths of dependent libraries -# to runtime path list. -inherit_rpath=$inherit_rpath - -# Whether libtool must link a program against all its dependency libraries. -link_all_deplibs=$link_all_deplibs - -# Set to "yes" if exported symbols are required. -always_export_symbols=$always_export_symbols - -# The commands to list exported symbols. -export_symbols_cmds=$lt_export_symbols_cmds - -# Symbols that should not be listed in the preloaded symbols. -exclude_expsyms=$lt_exclude_expsyms - -# Symbols that must always be exported. -include_expsyms=$lt_include_expsyms - -# Commands necessary for linking programs (against libraries) with templates. -prelink_cmds=$lt_prelink_cmds - -# Commands necessary for finishing linking programs. -postlink_cmds=$lt_postlink_cmds - -# Specify filename containing input files. -file_list_spec=$lt_file_list_spec - -# How to hardcode a shared library path into an executable. -hardcode_action=$hardcode_action - -# ### END LIBTOOL CONFIG - -_LT_EOF - - case $host_os in - aix3*) - cat <<\_LT_EOF >> "$cfgfile" -# AIX sometimes has problems with the GCC collect2 program. For some -# reason, if we set the COLLECT_NAMES environment variable, the problems -# vanish in a puff of smoke. -if test "X${COLLECT_NAMES+set}" != Xset; then - COLLECT_NAMES= - export COLLECT_NAMES -fi -_LT_EOF - ;; - esac - - -ltmain="$ac_aux_dir/ltmain.sh" - - - # We use sed instead of cat because bash on DJGPP gets confused if - # if finds mixed CR/LF and LF-only lines. Since sed operates in - # text mode, it properly converts lines to CR/LF. This bash problem - # is reportedly fixed, but why not run on old versions too? - sed '$q' "$ltmain" >> "$cfgfile" \ - || (rm -f "$cfgfile"; exit 1) - - if test x"$xsi_shell" = xyes; then - sed -e '/^func_dirname ()$/,/^} # func_dirname /c\ -func_dirname ()\ -{\ -\ case ${1} in\ -\ */*) func_dirname_result="${1%/*}${2}" ;;\ -\ * ) func_dirname_result="${3}" ;;\ -\ esac\ -} # Extended-shell func_dirname implementation' "$cfgfile" > $cfgfile.tmp \ - && mv -f "$cfgfile.tmp" "$cfgfile" \ - || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") -test 0 -eq $? || _lt_function_replace_fail=: - - - sed -e '/^func_basename ()$/,/^} # func_basename /c\ -func_basename ()\ -{\ -\ func_basename_result="${1##*/}"\ -} # Extended-shell func_basename implementation' "$cfgfile" > $cfgfile.tmp \ - && mv -f "$cfgfile.tmp" "$cfgfile" \ - || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") -test 0 -eq $? || _lt_function_replace_fail=: - - - sed -e '/^func_dirname_and_basename ()$/,/^} # func_dirname_and_basename /c\ -func_dirname_and_basename ()\ -{\ -\ case ${1} in\ -\ */*) func_dirname_result="${1%/*}${2}" ;;\ -\ * ) func_dirname_result="${3}" ;;\ -\ esac\ -\ func_basename_result="${1##*/}"\ -} # Extended-shell func_dirname_and_basename implementation' "$cfgfile" > $cfgfile.tmp \ - && mv -f "$cfgfile.tmp" "$cfgfile" \ - || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") -test 0 -eq $? || _lt_function_replace_fail=: - - - sed -e '/^func_stripname ()$/,/^} # func_stripname /c\ -func_stripname ()\ -{\ -\ # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are\ -\ # positional parameters, so assign one to ordinary parameter first.\ -\ func_stripname_result=${3}\ -\ func_stripname_result=${func_stripname_result#"${1}"}\ -\ func_stripname_result=${func_stripname_result%"${2}"}\ -} # Extended-shell func_stripname implementation' "$cfgfile" > $cfgfile.tmp \ - && mv -f "$cfgfile.tmp" "$cfgfile" \ - || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") -test 0 -eq $? || _lt_function_replace_fail=: - - - sed -e '/^func_split_long_opt ()$/,/^} # func_split_long_opt /c\ -func_split_long_opt ()\ -{\ -\ func_split_long_opt_name=${1%%=*}\ -\ func_split_long_opt_arg=${1#*=}\ -} # Extended-shell func_split_long_opt implementation' "$cfgfile" > $cfgfile.tmp \ - && mv -f "$cfgfile.tmp" "$cfgfile" \ - || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") -test 0 -eq $? || _lt_function_replace_fail=: - - - sed -e '/^func_split_short_opt ()$/,/^} # func_split_short_opt /c\ -func_split_short_opt ()\ -{\ -\ func_split_short_opt_arg=${1#??}\ -\ func_split_short_opt_name=${1%"$func_split_short_opt_arg"}\ -} # Extended-shell func_split_short_opt implementation' "$cfgfile" > $cfgfile.tmp \ - && mv -f "$cfgfile.tmp" "$cfgfile" \ - || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") -test 0 -eq $? || _lt_function_replace_fail=: - - - sed -e '/^func_lo2o ()$/,/^} # func_lo2o /c\ -func_lo2o ()\ -{\ -\ case ${1} in\ -\ *.lo) func_lo2o_result=${1%.lo}.${objext} ;;\ -\ *) func_lo2o_result=${1} ;;\ -\ esac\ -} # Extended-shell func_lo2o implementation' "$cfgfile" > $cfgfile.tmp \ - && mv -f "$cfgfile.tmp" "$cfgfile" \ - || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") -test 0 -eq $? || _lt_function_replace_fail=: - - - sed -e '/^func_xform ()$/,/^} # func_xform /c\ -func_xform ()\ -{\ - func_xform_result=${1%.*}.lo\ -} # Extended-shell func_xform implementation' "$cfgfile" > $cfgfile.tmp \ - && mv -f "$cfgfile.tmp" "$cfgfile" \ - || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") -test 0 -eq $? || _lt_function_replace_fail=: - - - sed -e '/^func_arith ()$/,/^} # func_arith /c\ -func_arith ()\ -{\ - func_arith_result=$(( $* ))\ -} # Extended-shell func_arith implementation' "$cfgfile" > $cfgfile.tmp \ - && mv -f "$cfgfile.tmp" "$cfgfile" \ - || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") -test 0 -eq $? || _lt_function_replace_fail=: - - - sed -e '/^func_len ()$/,/^} # func_len /c\ -func_len ()\ -{\ - func_len_result=${#1}\ -} # Extended-shell func_len implementation' "$cfgfile" > $cfgfile.tmp \ - && mv -f "$cfgfile.tmp" "$cfgfile" \ - || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") -test 0 -eq $? || _lt_function_replace_fail=: - -fi - -if test x"$lt_shell_append" = xyes; then - sed -e '/^func_append ()$/,/^} # func_append /c\ -func_append ()\ -{\ - eval "${1}+=\\${2}"\ -} # Extended-shell func_append implementation' "$cfgfile" > $cfgfile.tmp \ - && mv -f "$cfgfile.tmp" "$cfgfile" \ - || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") -test 0 -eq $? || _lt_function_replace_fail=: - - - sed -e '/^func_append_quoted ()$/,/^} # func_append_quoted /c\ -func_append_quoted ()\ -{\ -\ func_quote_for_eval "${2}"\ -\ eval "${1}+=\\\\ \\$func_quote_for_eval_result"\ -} # Extended-shell func_append_quoted implementation' "$cfgfile" > $cfgfile.tmp \ - && mv -f "$cfgfile.tmp" "$cfgfile" \ - || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") -test 0 -eq $? || _lt_function_replace_fail=: - - - # Save a `func_append' function call where possible by direct use of '+=' - sed -e 's%func_append \([a-zA-Z_]\{1,\}\) "%\1+="%g' $cfgfile > $cfgfile.tmp \ - && mv -f "$cfgfile.tmp" "$cfgfile" \ - || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") - test 0 -eq $? || _lt_function_replace_fail=: -else - # Save a `func_append' function call even when '+=' is not available - sed -e 's%func_append \([a-zA-Z_]\{1,\}\) "%\1="$\1%g' $cfgfile > $cfgfile.tmp \ - && mv -f "$cfgfile.tmp" "$cfgfile" \ - || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") - test 0 -eq $? || _lt_function_replace_fail=: -fi - -if test x"$_lt_function_replace_fail" = x":"; then - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Unable to substitute extended shell functions in $ofile" >&5 -$as_echo "$as_me: WARNING: Unable to substitute extended shell functions in $ofile" >&2;} -fi - - - mv -f "$cfgfile" "$ofile" || - (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile") - chmod +x "$ofile" - - ;; - - esac -done # for ac_tag - - -as_fn_exit 0 -_ACEOF -ac_clean_files=$ac_clean_files_save - -test $ac_write_fail = 0 || - as_fn_error $? "write failure creating $CONFIG_STATUS" "$LINENO" 5 - - -# configure is writing to config.log, and then calls config.status. -# config.status does its own redirection, appending to config.log. -# Unfortunately, on DOS this fails, as config.log is still kept open -# by configure, so config.status won't be able to write to it; its -# output is simply discarded. So we exec the FD to /dev/null, -# effectively closing config.log, so it can be properly (re)opened and -# appended to by config.status. When coming back to configure, we -# need to make the FD available again. -if test "$no_create" != yes; then - ac_cs_success=: - ac_config_status_args= - test "$silent" = yes && - ac_config_status_args="$ac_config_status_args --quiet" - exec 5>/dev/null - $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false - exec 5>>config.log - # Use ||, not &&, to avoid exiting from the if with $? = 1, which - # would make configure fail if this is the last instruction. - $ac_cs_success || as_fn_exit 1 -fi -if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: unrecognized options: $ac_unrecognized_opts" >&5 -$as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2;} -fi Binary files /tmp/oYL0Sn27SZ/libshairport-1.2.0.20310.1/._configure.in and /tmp/Wgyqs1Jfgh/libshairport-1.2.1~git20120110.aeb4987/._configure.in differ diff -Nru libshairport-1.2.0.20310.1/configure.in libshairport-1.2.1~git20120110.aeb4987/configure.in --- libshairport-1.2.0.20310.1/configure.in 2011-09-23 20:56:46.000000000 +0000 +++ libshairport-1.2.1~git20120110.aeb4987/configure.in 2012-01-11 04:34:34.000000000 +0000 @@ -1,24 +1,30 @@ # -*- Autoconf -*- # Process this file with autoconf to produce a configure script. -AC_INIT([shairport.c], [1.2.0], [http://trac.xbmc.org]) -AM_INIT_AUTOMAKE(shairport,1.2.0) +AC_INIT([shairport.c], [1.2.1], [http://trac.xbmc.org]) +AM_INIT_AUTOMAKE(libshairport, 1.2.1) AC_CONFIG_HEADERS([config.h]) -AC_PROG_CC +AC_CONFIG_MACRO_DIR([m4]) -AC_DISABLE_STATIC +# library version info +# NOTE: this is not the same as the library's release number +LIBSHAIRPORT_INTERFACE=1 +LIBSHAIRPORT_REVISION=0 +LIBSHAIRPORT_AGE=0 +LIBSHAIRPORT_LIBTOOL_VERSION=$LIBSHAIRPORT_INTERFACE:$LIBSHAIRPORT_REVISION:$LIBSHAIRPORT_MINOR + +AC_PROG_CC AC_PROG_LIBTOOL # Checks for libraries. -#AC_CHECK_LIB([c], [main]) -#AC_CHECK_LIB([m], [main]) +AC_CHECK_LIB([m], [main]) AC_CHECK_LIB([ssl], [main],, AC_MSG_ERROR($missing_library)) +AC_CHECK_LIB([crypto], [main],, AC_MSG_ERROR($missing_library)) AC_CHECK_LIB([pthread], [main],, AC_MSG_ERROR($missing_library)) -OUTPUT_FILES="Makefile" - -LIBDIR=$PREFIX +# Checks for headers +AC_CHECK_HEADER([ao/ao.h],, AC_MSG_ERROR($missing_library)) -AC_CONFIG_FILES([${OUTPUT_FILES}]) -AC_OUTPUT(Makefile src/Makefile) -AC_OUTPUT \ No newline at end of file +AC_SUBST(LIBSHAIRPORT_LIBTOOL_VERSION) +AC_CONFIG_FILES(Makefile src/Makefile libshairport.pc) +AC_OUTPUT diff -Nru libshairport-1.2.0.20310.1/debian/changelog libshairport-1.2.1~git20120110.aeb4987/debian/changelog --- libshairport-1.2.0.20310.1/debian/changelog 2012-01-10 19:55:43.000000000 +0000 +++ libshairport-1.2.1~git20120110.aeb4987/debian/changelog 2012-01-15 19:08:20.000000000 +0000 @@ -1,12 +1,16 @@ -libshairport (1.2.0.20310.1-0ubuntu2~lucid1) lucid; urgency=low +libshairport (1.2.1~git20120110.aeb4987-1ubuntu0~ppa1~lucid1) lucid; urgency=low - * add 009_fix_ipv6.patch + [ Andres Mejia ] + * Prepare upload of libshairport to Debian. (Closes: #655270) - -- Mario Sitz Tue, 10 Jan 2012 20:54:10 +0100 + [ Mario Sitz ] + * port to lucid -libshairport (1.2.0.20310.1-0ubuntu1~natty1) natty; urgency=low + -- Mario Sitz Sun, 15 Jan 2012 20:06:57 +0100 - * port to natty +libshairport (1.2.0.20310.1-0ubuntu1~oneiric1) oneiric; urgency=low + + * port to oneiric -- Mario Sitz Thu, 10 Nov 2011 20:48:38 +0100 diff -Nru libshairport-1.2.0.20310.1/debian/control libshairport-1.2.1~git20120110.aeb4987/debian/control --- libshairport-1.2.0.20310.1/debian/control 2011-11-01 16:46:05.000000000 +0000 +++ libshairport-1.2.1~git20120110.aeb4987/debian/control 2012-01-15 16:56:10.000000000 +0000 @@ -1,34 +1,38 @@ -Source:libshairport -Priority: extra -Maintainer: Mario Sitz -Build-Depends: debhelper (>= 7.4.0), autotools-dev, libssl-dev, libcrypt-openssl-rsa-perl, libao-dev, libio-socket-inet6-perl, libwww-perl, avahi-utils +Source: libshairport +Priority: optional +Maintainer: Andres Mejia +Build-Depends: debhelper (>= 7.4.15), libssl-dev, libao-dev Standards-Version: 3.9.2 Section: libs Homepage: http://mirrors.xbmc.org/build-deps/darwin-libs/ -#Vcs-Git: git://git.debian.org/collab-maint/libshairport.git -#Vcs-Browser: http://git.debian.org/?p=collab-maint/libshairport.git;a=summary +Vcs-Git: git://anonscm.debian.org/collab-maint/libshairport.git +Vcs-Browser: http://anonscm.debian.org/gitweb/?p=collab-maint/libshairport.git Package: libshairport-dev Section: libdevel Architecture: any -Depends: libshairport0 (= ${binary:Version}), ${misc:Depends} +Depends: libao-dev, libshairport1 (= ${binary:Version}), ${misc:Depends} Description: emulates an AirPort Express (development files) - This program emulates an AirPort Express for the purpose of + This program emulates an AirPort Express for the purpose of streaming music from iTunes and compatible iPods. It implements - a server for the Apple RAOP protocol.ShairPort does not support - AirPlay v2 (video and photo streaming).It supports multiple - simultaneous streams, if your audio output chain + a server for the Apple RAOP protocol. ShairPort does not support + AirPlay v2 (video and photo streaming). It supports multiple + simultaneous streams, if your audio output chain (as detected by libao) does so. + . + This package installs the files necessary for development. -Package: libshairport0 -Section: libs +Package: libshairport1 Architecture: any +Multi-Arch: same +Pre-Depends: ${misc:Pre-Depends} Depends: ${shlibs:Depends}, ${misc:Depends} -Description: emulates an AirPort Express - This program emulates an AirPort Express for the purpose of +Description: emulates an AirPort Express (shared library) + This program emulates an AirPort Express for the purpose of streaming music from iTunes and compatible iPods. It implements - a server for the Apple RAOP protocol.ShairPort does not support - AirPlay v2 (video and photo streaming).It supports multiple - simultaneous streams, if your audio output chain + a server for the Apple RAOP protocol. ShairPort does not support + AirPlay v2 (video and photo streaming). It supports multiple + simultaneous streams, if your audio output chain (as detected by libao) does so. - + . + This package installs the shared library. diff -Nru libshairport-1.2.0.20310.1/debian/copyright libshairport-1.2.1~git20120110.aeb4987/debian/copyright --- libshairport-1.2.0.20310.1/debian/copyright 2011-10-23 09:25:48.000000000 +0000 +++ libshairport-1.2.1~git20120110.aeb4987/debian/copyright 2012-01-11 04:37:07.000000000 +0000 @@ -3,8 +3,10 @@ Source: http://mirrors.xbmc.org/build-deps/darwin-libs/ Files: * -Copyright: 2011 James Laird -License: unknown +Copyright: 2005 David Hammerton + 2011 James Laird + 2011 M. Andrew Webster +License: MIT Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without @@ -25,9 +27,9 @@ FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. - Files: debian/* Copyright: 2011 Mario Sitz + 2012 Andres Mejia License: GPL-2+ This package is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by diff -Nru libshairport-1.2.0.20310.1/debian/docs libshairport-1.2.1~git20120110.aeb4987/debian/docs --- libshairport-1.2.0.20310.1/debian/docs 2011-10-23 08:40:07.000000000 +0000 +++ libshairport-1.2.1~git20120110.aeb4987/debian/docs 1970-01-01 00:00:00.000000000 +0000 @@ -1,2 +0,0 @@ -NEWS -README diff -Nru libshairport-1.2.0.20310.1/debian/gbp.conf libshairport-1.2.1~git20120110.aeb4987/debian/gbp.conf --- libshairport-1.2.0.20310.1/debian/gbp.conf 1970-01-01 00:00:00.000000000 +0000 +++ libshairport-1.2.1~git20120110.aeb4987/debian/gbp.conf 2012-01-11 04:37:07.000000000 +0000 @@ -0,0 +1,2 @@ +[DEFAULT] +pristine-tar = True diff -Nru libshairport-1.2.0.20310.1/debian/libshairport0.dirs libshairport-1.2.1~git20120110.aeb4987/debian/libshairport0.dirs --- libshairport-1.2.0.20310.1/debian/libshairport0.dirs 2011-10-23 08:40:07.000000000 +0000 +++ libshairport-1.2.1~git20120110.aeb4987/debian/libshairport0.dirs 1970-01-01 00:00:00.000000000 +0000 @@ -1 +0,0 @@ -usr/lib diff -Nru libshairport-1.2.0.20310.1/debian/libshairport0.install libshairport-1.2.1~git20120110.aeb4987/debian/libshairport0.install --- libshairport-1.2.0.20310.1/debian/libshairport0.install 2011-10-23 08:40:07.000000000 +0000 +++ libshairport-1.2.1~git20120110.aeb4987/debian/libshairport0.install 1970-01-01 00:00:00.000000000 +0000 @@ -1 +0,0 @@ -usr/lib/lib*.so.* diff -Nru libshairport-1.2.0.20310.1/debian/libshairport1.install libshairport-1.2.1~git20120110.aeb4987/debian/libshairport1.install --- libshairport-1.2.0.20310.1/debian/libshairport1.install 1970-01-01 00:00:00.000000000 +0000 +++ libshairport-1.2.1~git20120110.aeb4987/debian/libshairport1.install 2012-01-15 16:58:37.000000000 +0000 @@ -0,0 +1 @@ +usr/lib/lib*.so.* diff -Nru libshairport-1.2.0.20310.1/debian/libshairport1.lintian-overrides libshairport-1.2.1~git20120110.aeb4987/debian/libshairport1.lintian-overrides --- libshairport-1.2.0.20310.1/debian/libshairport1.lintian-overrides 1970-01-01 00:00:00.000000000 +0000 +++ libshairport-1.2.1~git20120110.aeb4987/debian/libshairport1.lintian-overrides 2012-01-11 04:37:07.000000000 +0000 @@ -0,0 +1,2 @@ +# libshairport code is under MIT license, packaging is GPL-2+ +libshairport1: possible-gpl-code-linked-with-openssl diff -Nru libshairport-1.2.0.20310.1/debian/libshairport-dev.dirs libshairport-1.2.1~git20120110.aeb4987/debian/libshairport-dev.dirs --- libshairport-1.2.0.20310.1/debian/libshairport-dev.dirs 2011-10-23 08:40:07.000000000 +0000 +++ libshairport-1.2.1~git20120110.aeb4987/debian/libshairport-dev.dirs 1970-01-01 00:00:00.000000000 +0000 @@ -1,2 +0,0 @@ -usr/lib -usr/include diff -Nru libshairport-1.2.0.20310.1/debian/libshairport-dev.install libshairport-1.2.1~git20120110.aeb4987/debian/libshairport-dev.install --- libshairport-1.2.0.20310.1/debian/libshairport-dev.install 2011-10-30 08:03:51.000000000 +0000 +++ libshairport-1.2.1~git20120110.aeb4987/debian/libshairport-dev.install 2012-01-15 16:58:58.000000000 +0000 @@ -1,3 +1,4 @@ -usr/include/* +usr/include +usr/lib/pkgconfig usr/lib/lib*.so - +usr/lib/lib*.a diff -Nru libshairport-1.2.0.20310.1/debian/libshairport-get-orig-source libshairport-1.2.1~git20120110.aeb4987/debian/libshairport-get-orig-source --- libshairport-1.2.0.20310.1/debian/libshairport-get-orig-source 1970-01-01 00:00:00.000000000 +0000 +++ libshairport-1.2.1~git20120110.aeb4987/debian/libshairport-get-orig-source 2012-01-11 04:37:07.000000000 +0000 @@ -0,0 +1,41 @@ +#!/bin/sh + +set -e + +# Script used to generate the orig source tarball for libshairport. + +LIBSHAIRPORT_GIT_URL="git://github.com/amejia1/libshairport.git" +LIBSHAIRPORT_GIT_COMMIT="aeb4987f571ee79b3f2e6ccaecd7c1ac3c39e360" +DATE_RETRIEVED="20120110" +COMMIT_SHORT_FORM="$(echo $LIBSHAIRPORT_GIT_COMMIT | \ + sed -e 's/^\([[:xdigit:]]\{,7\}\).*/\1/')" +LIBSHAIRPORT_VERSION="1.2.1~git${DATE_RETRIEVED}.${COMMIT_SHORT_FORM}" + +rm -rf "libshairport-${LIBSHAIRPORT_VERSION}" +git clone "$LIBSHAIRPORT_GIT_URL" "libshairport-${LIBSHAIRPORT_VERSION}" +cd "libshairport-${LIBSHAIRPORT_VERSION}" +git checkout "$LIBSHAIRPORT_GIT_COMMIT" +autoreconf -vif +cd .. + +# Remove temp files and other cruft from source tarball +# The find command snippet here was taken from debhelper's dh_clean command +# with some modification to delete more unneeded files. +echo "Removing temp files and other cruft from source tarball" +find libshairport-${LIBSHAIRPORT_VERSION} \( \( -type f -a \ + \( -name '#*#' -o -name '.*~' -o -name '*~' -o -name DEADJOE \ + -o -name '*.orig' -o -name '*.rej' -o -name '*.bak' \ + -o -name '.*.orig' -o -name .*.rej -o -name '.SUMS' \ + -o -name TAGS -o \( -path '*/.deps/*' -a -name '*.P' \) \ + -o -name config.status -o -name config.cache -o -name config.log \ + \) -exec rm -f "{}" \; \) -o \ + \( -type d -a -name autom4te.cache -prune -exec rm -rf "{}" \; \) \) +rm -rf libshairport-${LIBSHAIRPORT_VERSION}/.git +rm -f libshairport-${LIBSHAIRPORT_VERSION}/.gitignore + +# Remove empty directories +echo "Removing empty directories" +find libshairport-${LIBSHAIRPORT_VERSION} -type d -empty -delete + +tar --exclude-vcs -czf "libshairport_${LIBSHAIRPORT_VERSION}.orig.tar.gz" \ + "libshairport-${LIBSHAIRPORT_VERSION}/" diff -Nru libshairport-1.2.0.20310.1/debian/libshairport.pc libshairport-1.2.1~git20120110.aeb4987/debian/libshairport.pc --- libshairport-1.2.0.20310.1/debian/libshairport.pc 2011-10-30 08:01:09.000000000 +0000 +++ libshairport-1.2.1~git20120110.aeb4987/debian/libshairport.pc 1970-01-01 00:00:00.000000000 +0000 @@ -1,10 +0,0 @@ -prefix=/usr -exec_prefix=${prefix} -libdir=${exec_prefix}/lib -includedir=${prefix}/include - -Name: libshairport -Description: airport implementation -Version: v1.2 -Libs: -L${libdir} -lshairport -lpthread -lssl -Cflags: -I${includedir} diff -Nru libshairport-1.2.0.20310.1/debian/patches/001_add_ao.patch libshairport-1.2.1~git20120110.aeb4987/debian/patches/001_add_ao.patch --- libshairport-1.2.0.20310.1/debian/patches/001_add_ao.patch 2011-11-10 19:16:42.000000000 +0000 +++ libshairport-1.2.1~git20120110.aeb4987/debian/patches/001_add_ao.patch 1970-01-01 00:00:00.000000000 +0000 @@ -1,291 +0,0 @@ -Description: Upstream changes introduced in version 1.2.0.20310.1-0ubuntu1~oneiric1 - This patch has been created by dpkg-source during the package build. - Here's the last changelog entry, hopefully it gives details on why - those changes were made: - . - libshairport (1.2.0.20310.1-0ubuntu1~oneiric1) oneiric; urgency=low - . - * reorganize patches - . - The person named in the Author field signed this changelog entry. -Author: Mario Sitz - ---- -The information above should follow the Patch Tagging Guidelines, please -checkout http://dep.debian.net/deps/dep3/ to learn about the format. Here -are templates for supplementary fields that you might want to add: - -Origin: , -Bug: -Bug-Debian: http://bugs.debian.org/ -Bug-Ubuntu: https://launchpad.net/bugs/ -Forwarded: -Reviewed-By: -Last-Update: - ---- /dev/null -+++ libshairport-1.2.0.20310.1/src/ao.h -@@ -0,0 +1,156 @@ -+/* -+ * -+ * ao.h -+ * -+ * Original Copyright (C) Aaron Holtzman - May 1999 -+ * Modifications Copyright (C) Stan Seibert - July 2000, July 2001 -+ * More Modifications Copyright (C) Jack Moffitt - October 2000 -+ * -+ * This file is part of libao, a cross-platform audio outputlibrary. See -+ * README for a history of this source code. -+ * -+ * libao is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2, or (at your option) -+ * any later version. -+ * -+ * libao is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with GNU Make; see the file COPYING. If not, write to -+ * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. -+ * -+ */ -+#ifndef __AO_H__ -+#define __AO_H__ -+ -+#ifdef __cplusplus -+extern "C" -+{ -+#endif /* __cplusplus */ -+ -+#include -+#include -+#include -+#include -+ -+/* --- Constants ---*/ -+ -+#define AO_TYPE_LIVE 1 -+#define AO_TYPE_FILE 2 -+ -+ -+#define AO_ENODRIVER 1 -+#define AO_ENOTFILE 2 -+#define AO_ENOTLIVE 3 -+#define AO_EBADOPTION 4 -+#define AO_EOPENDEVICE 5 -+#define AO_EOPENFILE 6 -+#define AO_EFILEEXISTS 7 -+#define AO_EBADFORMAT 8 -+ -+#define AO_EFAIL 100 -+ -+ -+#define AO_FMT_LITTLE 1 -+#define AO_FMT_BIG 2 -+#define AO_FMT_NATIVE 4 -+ -+/* --- Structures --- */ -+ -+typedef struct ao_info { -+ int type; /* live output or file output? */ -+ char *name; /* full name of driver */ -+ char *short_name; /* short name of driver */ -+ char *author; /* driver author */ -+ char *comment; /* driver comment */ -+ int preferred_byte_format; -+ int priority; -+ char **options; -+ int option_count; -+} ao_info; -+ -+typedef struct ao_functions ao_functions; -+typedef struct ao_device ao_device; -+ -+typedef struct ao_sample_format { -+ int bits; /* bits per sample */ -+ int rate; /* samples per second (in a single channel) */ -+ int channels; /* number of audio channels */ -+ int byte_format; /* Byte ordering in sample, see constants below */ -+ char *matrix; /* input channel location/ordering */ -+} ao_sample_format; -+ -+typedef struct ao_option { -+ char *key; -+ char *value; -+ struct ao_option *next; -+} ao_option; -+ -+#if defined(AO_BUILDING_LIBAO) -+#include "ao_private.h" -+#endif -+ -+/* --- Functions --- */ -+ -+/* library setup/teardown */ -+void ao_initialize(void); -+void ao_shutdown(void); -+ -+/* device setup/playback/teardown */ -+int ao_append_global_option(const char *key, -+ const char *value); -+int ao_append_option(ao_option **options, -+ const char *key, -+ const char *value); -+void ao_free_options(ao_option *options); -+ -+char* ao_get_option(ao_option *options, const char* key); -+ -+ao_device* ao_open_live(int driver_id, -+ ao_sample_format *format, -+ ao_option *option); -+ao_device* ao_open_file(int driver_id, -+ const char *filename, -+ int overwrite, -+ ao_sample_format *format, -+ ao_option *option); -+ -+int ao_play(ao_device *device, -+ char *output_samples, -+ uint32_t num_bytes); -+int ao_close(ao_device *device); -+ -+/* driver information */ -+int ao_driver_id(const char *short_name); -+int ao_default_driver_id(void); -+ao_info *ao_driver_info(int driver_id); -+ao_info **ao_driver_info_list(int *driver_count); -+char *ao_file_extension(int driver_id); -+ -+/* miscellaneous */ -+int ao_is_big_endian(void); -+ -+ -+#ifdef __cplusplus -+} -+#endif /* __cplusplus */ -+ -+#endif /* __AO_H__ */ -+ -+extern struct AudioOutput g_ao; -+struct AudioOutput -+ { -+ void (*ao_initialize)(void); -+ int (*ao_play)(ao_device *, char *, uint32_t); -+ int (*ao_default_driver_id)(void); -+ ao_device* (*ao_open_live)( int, ao_sample_format *, ao_option *); -+ int (*ao_close)(ao_device *); -+ /* -- Device Setup/Playback/Teardown -- */ -+ int (*ao_append_option)(ao_option **, const char *, const char *); -+ void (*ao_free_options)(ao_option *); -+ char* (*ao_get_option)(ao_option *, const char* ); -+ }; ---- libshairport-1.2.0.20310.1.orig/src/hairtunes.c -+++ libshairport-1.2.0.20310.1/src/hairtunes.c -@@ -25,7 +25,7 @@ - */ - - #define XBMC --//#defined HAS_AO -+#define HAS_AO - - #include - #include -@@ -45,7 +45,7 @@ - #include - #include - #ifdef HAS_AO --#include -+#include "ao.h" - #endif - - #ifdef FANCY_RESAMPLING -@@ -881,7 +881,7 @@ void *audio_thread_func(void *arg) { - } - #ifdef HAS_AO - } else { -- ao_play(dev, (char *)outbuf, play_samples*4); -+ g_ao.ao_play(dev, (char *)outbuf, play_samples*4); - #endif - } - } -@@ -906,7 +906,7 @@ void init_pipe(char* pipe) { - ao_device *dev; - - void* init_ao() { -- ao_initialize(); -+ g_ao.ao_initialize(); - - int driver; - #ifndef XBMC -@@ -921,7 +921,7 @@ void* init_ao() { - #endif - { - // otherwise choose the default -- driver = ao_default_driver_id(); -+ driver = g_ao.ao_default_driver_id(); - } - - ao_sample_format fmt; -@@ -944,9 +944,9 @@ void* init_ao() { - } - #endif - -- ao_append_option(&ao_opts, "name", "Streaming..."); -+ g_ao.ao_append_option(&ao_opts, "name", "Streaming..."); - -- dev = ao_open_live(driver, &fmt, ao_opts); -+ dev = g_ao.ao_open_live(driver, &fmt, ao_opts); - if (dev == NULL) { - die("Could not open ao device"); - } -@@ -985,7 +985,7 @@ void clean_output(void) - audio_running = 0; - pthread_join(audio_thread, NULL); - #ifdef HAS_AO -- ao_close(dev); -+ g_ao.ao_close(dev); - #endif - } - ---- libshairport-1.2.0.20310.1.orig/src/shairport.h -+++ libshairport-1.2.0.20310.1/src/shairport.h -@@ -11,6 +11,7 @@ - #include - #include - #include -+#include "ao.h" - - - #define HWID_SIZE 6 -@@ -62,9 +63,11 @@ int shairport_main(int argc, char **argv - void shairport_exit(void); - int shairport_loop(void); - int shairport_is_running(void); -+void shairport_set_ao(struct AudioOutput *ao); - - #ifdef __cplusplus - } - #endif /* __cplusplus */ - - #endif -+ ---- libshairport-1.2.0.20310.1.orig/src/shairport.c -+++ libshairport-1.2.0.20310.1/src/shairport.c -@@ -92,6 +92,14 @@ static struct addrinfo *tAddrInfo; - static char tPassword[56] = ""; - static char tHWID[HWID_SIZE] = {0,51,52,53,54,55}; - -+#ifdef XBMC -+struct AudioOutput g_ao; -+void shairport_set_ao(struct AudioOutput *ao) -+{ -+ g_ao=*ao; -+} -+#endif -+ - #ifndef XBMC - int main(int argc, char **argv) - #else diff -Nru libshairport-1.2.0.20310.1/debian/patches/002_fix_install_header.patch libshairport-1.2.1~git20120110.aeb4987/debian/patches/002_fix_install_header.patch --- libshairport-1.2.0.20310.1/debian/patches/002_fix_install_header.patch 2011-11-10 19:18:37.000000000 +0000 +++ libshairport-1.2.1~git20120110.aeb4987/debian/patches/002_fix_install_header.patch 1970-01-01 00:00:00.000000000 +0000 @@ -1,37 +0,0 @@ -Description: Upstream changes introduced in version 1.2.0.20310.1-0ubuntu1~oneiric1 - This patch has been created by dpkg-source during the package build. - Here's the last changelog entry, hopefully it gives details on why - those changes were made: - . - libshairport (1.2.0.20310.1-0ubuntu1~oneiric1) oneiric; urgency=low - . - * reorganize patches - . - The person named in the Author field signed this changelog entry. -Author: Mario Sitz - ---- -The information above should follow the Patch Tagging Guidelines, please -checkout http://dep.debian.net/deps/dep3/ to learn about the format. Here -are templates for supplementary fields that you might want to add: - -Origin: , -Bug: -Bug-Debian: http://bugs.debian.org/ -Bug-Ubuntu: https://launchpad.net/bugs/ -Forwarded: -Reviewed-By: -Last-Update: - ---- libshairport-1.2.0.20310.1.orig/src/Makefile.am -+++ libshairport-1.2.0.20310.1/src/Makefile.am -@@ -1,7 +1,7 @@ - lib_LTLIBRARIES=libshairport.la - --library_includedir=$(includedir) --library_include_HEADERS = shairport.h -+library_includedir=$(includedir)/shairport -+library_include_HEADERS = shairport.h ao.h socketlib.h - - libshairport_la_SOURCES=shairport.c hairtunes.c socketlib.c alac.c - libshairport_la_LDFLAGS=-dynamiclib diff -Nru libshairport-1.2.0.20310.1/debian/patches/003_fix_deadlock.patch libshairport-1.2.1~git20120110.aeb4987/debian/patches/003_fix_deadlock.patch --- libshairport-1.2.0.20310.1/debian/patches/003_fix_deadlock.patch 2011-11-10 19:20:56.000000000 +0000 +++ libshairport-1.2.1~git20120110.aeb4987/debian/patches/003_fix_deadlock.patch 1970-01-01 00:00:00.000000000 +0000 @@ -1,35 +0,0 @@ -Description: Upstream changes introduced in version 1.2.0.20310.1-0ubuntu1~oneiric1 - This patch has been created by dpkg-source during the package build. - Here's the last changelog entry, hopefully it gives details on why - those changes were made: - . - libshairport (1.2.0.20310.1-0ubuntu1~oneiric1) oneiric; urgency=low - . - * reorganize patches - . - The person named in the Author field signed this changelog entry. -Author: Mario Sitz - ---- -The information above should follow the Patch Tagging Guidelines, please -checkout http://dep.debian.net/deps/dep3/ to learn about the format. Here -are templates for supplementary fields that you might want to add: - -Origin: , -Bug: -Bug-Debian: http://bugs.debian.org/ -Bug-Ubuntu: https://launchpad.net/bugs/ -Forwarded: -Reviewed-By: -Last-Update: - ---- libshairport-1.2.0.20310.1.orig/src/hairtunes.c -+++ libshairport-1.2.0.20310.1/src/hairtunes.c -@@ -991,6 +991,7 @@ void clean_output(void) - - void hairtunes_cleanup(void) - { -+ pthread_cond_signal(&ab_buffer_ready); - clean_output(); - clean_rtp(); - clean_buffer(); diff -Nru libshairport-1.2.0.20310.1/debian/patches/004_fix_bad_access.patch libshairport-1.2.1~git20120110.aeb4987/debian/patches/004_fix_bad_access.patch --- libshairport-1.2.0.20310.1/debian/patches/004_fix_bad_access.patch 2011-11-10 19:21:51.000000000 +0000 +++ libshairport-1.2.1~git20120110.aeb4987/debian/patches/004_fix_bad_access.patch 1970-01-01 00:00:00.000000000 +0000 @@ -1,47 +0,0 @@ -Description: Upstream changes introduced in version 1.2.0.20310.1-0ubuntu1~oneiric1 - This patch has been created by dpkg-source during the package build. - Here's the last changelog entry, hopefully it gives details on why - those changes were made: - . - libshairport (1.2.0.20310.1-0ubuntu1~oneiric1) oneiric; urgency=low - . - * reorganize patches - . - The person named in the Author field signed this changelog entry. -Author: Mario Sitz - ---- -The information above should follow the Patch Tagging Guidelines, please -checkout http://dep.debian.net/deps/dep3/ to learn about the format. Here -are templates for supplementary fields that you might want to add: - -Origin: , -Bug: -Bug-Debian: http://bugs.debian.org/ -Bug-Ubuntu: https://launchpad.net/bugs/ -Forwarded: -Reviewed-By: -Last-Update: - ---- libshairport-1.2.0.20310.1.orig/src/hairtunes.c -+++ libshairport-1.2.0.20310.1/src/hairtunes.c -@@ -89,7 +89,6 @@ int pipe_handle = -1; - // maximal resampling shift - conservative - #define OUTFRAME_BYTES (4*(frame_size+3)) - -- - alac_file *decoder_info; - - #ifdef FANCY_RESAMPLING -@@ -849,6 +848,11 @@ void *audio_thread_func(void *arg) { - inbuf = buffer_get_frame(); - } while (!inbuf && audio_running); - -+ if(!audio_running) -+ { -+ return 0; //don't access inbuf if audio stopped -+ } -+ - #ifdef FANCY_RESAMPLING - if (fancy_resampling) { - int i; diff -Nru libshairport-1.2.0.20310.1/debian/patches/005_fix_shutdown.patch libshairport-1.2.1~git20120110.aeb4987/debian/patches/005_fix_shutdown.patch --- libshairport-1.2.0.20310.1/debian/patches/005_fix_shutdown.patch 2011-11-10 19:22:33.000000000 +0000 +++ libshairport-1.2.1~git20120110.aeb4987/debian/patches/005_fix_shutdown.patch 1970-01-01 00:00:00.000000000 +0000 @@ -1,35 +0,0 @@ -Description: Upstream changes introduced in version 1.2.0.20310.1-0ubuntu1~oneiric1 - This patch has been created by dpkg-source during the package build. - Here's the last changelog entry, hopefully it gives details on why - those changes were made: - . - libshairport (1.2.0.20310.1-0ubuntu1~oneiric1) oneiric; urgency=low - . - * reorganize patches - . - The person named in the Author field signed this changelog entry. -Author: Mario Sitz - ---- -The information above should follow the Patch Tagging Guidelines, please -checkout http://dep.debian.net/deps/dep3/ to learn about the format. Here -are templates for supplementary fields that you might want to add: - -Origin: , -Bug: -Bug-Debian: http://bugs.debian.org/ -Bug-Ubuntu: https://launchpad.net/bugs/ -Forwarded: -Reviewed-By: -Last-Update: - ---- libshairport-1.2.0.20310.1.orig/src/shairport.c -+++ libshairport-1.2.0.20310.1/src/shairport.c -@@ -368,6 +368,7 @@ int shairport_loop(void) - void shairport_exit(void) - { - m_running = 0; -+ close(tServerSock); - } - - int shairport_is_running(void) diff -Nru libshairport-1.2.0.20310.1/debian/patches/006_no_printf.patch libshairport-1.2.1~git20120110.aeb4987/debian/patches/006_no_printf.patch --- libshairport-1.2.0.20310.1/debian/patches/006_no_printf.patch 2011-11-10 19:23:39.000000000 +0000 +++ libshairport-1.2.1~git20120110.aeb4987/debian/patches/006_no_printf.patch 1970-01-01 00:00:00.000000000 +0000 @@ -1,868 +0,0 @@ -Description: Upstream changes introduced in version 1.2.0.20310.1-0ubuntu1~oneiric1 - This patch has been created by dpkg-source during the package build. - Here's the last changelog entry, hopefully it gives details on why - those changes were made: - . - libshairport (1.2.0.20310.1-0ubuntu1~oneiric1) oneiric; urgency=low - . - * reorganize patches - . - The person named in the Author field signed this changelog entry. -Author: Mario Sitz - ---- -The information above should follow the Patch Tagging Guidelines, please -checkout http://dep.debian.net/deps/dep3/ to learn about the format. Here -are templates for supplementary fields that you might want to add: - -Origin: , -Bug: -Bug-Debian: http://bugs.debian.org/ -Bug-Ubuntu: https://launchpad.net/bugs/ -Forwarded: -Reviewed-By: -Last-Update: - ---- libshairport-1.2.0.20310.1.orig/src/socketlib.c -+++ libshairport-1.2.0.20310.1/src/socketlib.c -@@ -82,7 +82,7 @@ int setup_client(struct addrinfo *server - delay(RETRY_DELAY, &tRes); - } - } -- printf("%d Retry attempts exceeded\n", RETRY_COUNT); -+ xprintf("%d Retry attempts exceeded\n", RETRY_COUNT); - return ERROR; - } - -@@ -102,7 +102,7 @@ int getAddr(char *pHostname, char *pServ - tError = getaddrinfo(pHostname, pService, &hints, pAddrInfo); - if(tError != 0) - { -- printf("Error getting address info\n"); -+ xprintf("Error getting address info\n"); - } - return tError; - } -@@ -200,7 +200,7 @@ static int getCorrectedEncodeSize(int pS - else - { - // Invalid encoded data, no other cases are possible. -- printf("Unrecoverable error....base64 values are incorrectly encoded\n"); -+ xprintf("Unrecoverable error....base64 values are incorrectly encoded\n"); - return pSize; - } - } -@@ -226,7 +226,7 @@ char *decode_base64(unsigned char *pInpu - memset(input, 0, length); - memcpy(input, pInput, pLength); - memset(input+pLength, '=', length-pLength); -- printf("Fixed value: [%.*s]\n", length, input); -+ xprintf("Fixed value: [%.*s]\n", length, input); - } - char *buffer = (char *)malloc(length); - memset(buffer, 0, length); ---- libshairport-1.2.0.20310.1.orig/src/hairtunes.c -+++ libshairport-1.2.0.20310.1/src/hairtunes.c -@@ -121,8 +121,8 @@ pthread_mutex_t ab_mutex; - pthread_cond_t ab_buffer_ready; - - static void die(char *why) { -- fprintf(stderr, "FATAL: %s\n", why); -- exit(1); -+ xprintf("FATAL: %s\n", why); -+ //exit(1); - } - - static int hex2bin(unsigned char *buf, char *hex) { -@@ -245,13 +245,13 @@ int hairtunes_init(char *pAeskey, char * - continue; - } - if (!strcmp(line, "exit\n")) { -- exit(0); -+ ;//exit(0); - } - if (!strcmp(line, "flush\n")) { - hairtunes_flush(); - } - } -- fprintf(stderr, "bye!\n"); -+ xprintf("bye!\n"); - fflush(stderr); - #endif - -@@ -262,7 +262,7 @@ void hairtunes_setvolume(float f) - { - assert(f<=0); - if (debug) -- fprintf(stderr, "VOL: %lf\n", f); -+ xprintf("VOL: %lf\n", f); - volume = pow(10.0,0.05*f); - fix_volume = 65536.0 * volume; - } -@@ -273,7 +273,7 @@ void hairtunes_flush(void) - ab_resync(); - pthread_mutex_unlock(&ab_mutex); - if (debug) -- fprintf(stderr, "FLUSH\n"); -+ xprintf("FLUSH\n"); - } - - #ifdef HAIRTUNES_STANDALONE -@@ -423,7 +423,7 @@ static void buffer_put_packet(seq_t seqn - } else if (seq_order(ab_read, seqno)) { // late but not yet played - abuf = audio_buffer + BUFIDX(seqno); - } else { // too late. -- fprintf(stderr, "\nlate packet %04X (%04X:%04X)\n", seqno, ab_read, ab_write); -+ xprintf("\nlate packet %04X (%04X:%04X)\n", seqno, ab_read, ab_write); - } - buf_fill = ab_write - ab_read; - pthread_mutex_unlock(&ab_mutex); -@@ -520,7 +520,7 @@ static void rtp_request_resend(seq_t fir - if (seq_order(last, first)) - return; - -- fprintf(stderr, "requesting resend on %d packets (port %d)\n", last-first+1, controlport); -+ xprintf("requesting resend on %d packets (port %d)\n", last-first+1, controlport); - - char req[8]; // *not* a standard RTCP NACK - req[0] = 0x80; -@@ -604,8 +604,8 @@ static int init_rtp(void) { - port += 3; - } - -- printf("port: %d\n", port); // let our handler know where we end up listening -- printf("cport: %d\n", port+1); -+ xprintf("port: %d\n", port); // let our handler know where we end up listening -+ xprintf("cport: %d\n", port+1); - - rtp_sockets[0] = sock; - rtp_sockets[1] = csock; -@@ -708,7 +708,7 @@ void bf_est_update(short fill) { - bf_est_drift = biquad_filt(&bf_drift_lpf, CONTROL_B*(bf_est_err*CONTROL_A + err_deriv) + bf_est_drift); - - if (debug) -- fprintf(stderr, "bf %d err %f drift %f desiring %f ed %f estd %f\r", fill, bf_est_err, bf_est_drift, desired_fill, err_deriv, err_deriv + CONTROL_A*bf_est_err); -+ xprintf("bf %d err %f drift %f desiring %f ed %f estd %f\r", fill, bf_est_err, bf_est_drift, desired_fill, err_deriv, err_deriv + CONTROL_A*bf_est_err); - bf_playback_rate = 1.0 + CONTROL_A*bf_est_err + bf_est_drift; - - bf_last_err = bf_est_err; -@@ -724,7 +724,7 @@ short *buffer_get_frame(void) { - buf_fill = ab_write - ab_read; - if (buf_fill < 1 || !ab_synced || ab_buffering) { // init or underrun. stop and wait - if (ab_synced) -- fprintf(stderr, "\nunderrun\n"); -+ xprintf("\nunderrun\n"); - - ab_buffering = 1; - pthread_cond_wait(&ab_buffer_ready, &ab_mutex); -@@ -736,7 +736,7 @@ short *buffer_get_frame(void) { - return 0; - } - if (buf_fill >= BUFFER_FRAMES) { // overrunning! uh-oh. restart at a sane distance -- fprintf(stderr, "\noverrun.\n"); -+ xprintf("\noverrun.\n"); - ab_read = ab_write - START_FILL; - } - read = ab_read; -@@ -748,7 +748,7 @@ short *buffer_get_frame(void) { - - volatile abuf_t *curframe = audio_buffer + BUFIDX(read); - if (!curframe->ready) { -- fprintf(stderr, "\nmissing frame.\n"); -+ xprintf("\nmissing frame.\n"); - memset(curframe->data, 0, FRAME_BYTES); - } - curframe->ready = 0; -@@ -775,13 +775,13 @@ int stuff_buffer(double playback_rate, s - if (stuff) { - if (stuff==1) { - if (debug) -- fprintf(stderr, "+++++++++\n"); -+ xprintf("+++++++++\n"); - // interpolate one sample - *outptr++ = dithered_vol(((long)inptr[-2] + (long)inptr[0]) >> 1); - *outptr++ = dithered_vol(((long)inptr[-1] + (long)inptr[1]) >> 1); - } else if (stuff==-1) { - if (debug) -- fprintf(stderr, "---------\n"); -+ xprintf("---------\n"); - inptr++; - inptr++; - } ---- libshairport-1.2.0.20310.1.orig/src/alac.c -+++ libshairport-1.2.0.20310.1/src/alac.c -@@ -804,7 +804,7 @@ void decode_frame(alac_file *alac, - } - else - { -- fprintf(stderr, "FIXME: unhandled predicition type: %i\n", prediction_type); -+ xprintf("FIXME: unhandled predicition type: %i\n", prediction_type); - /* i think the only other prediction type (or perhaps this is just a - * boolean?) runs adaptive fir twice.. like: - * predictor_decompress_fir_adapt(predictor_error, tempout, ...) -@@ -885,7 +885,7 @@ void decode_frame(alac_file *alac, - } - case 20: - case 32: -- fprintf(stderr, "FIXME: unimplemented sample size %i\n", alac->setinfo_sample_size); -+ xprintf("FIXME: unimplemented sample size %i\n", alac->setinfo_sample_size); - break; - default: - break; -@@ -1004,7 +1004,7 @@ void decode_frame(alac_file *alac, - } - else - { /* see mono case */ -- fprintf(stderr, "FIXME: unhandled predicition type: %i\n", prediction_type_a); -+ xprintf("FIXME: unhandled predicition type: %i\n", prediction_type_a); - } - - /* channel 2 */ -@@ -1029,7 +1029,7 @@ void decode_frame(alac_file *alac, - } - else - { -- fprintf(stderr, "FIXME: unhandled predicition type: %i\n", prediction_type_b); -+ xprintf("FIXME: unhandled predicition type: %i\n", prediction_type_b); - } - } - else -@@ -1106,7 +1106,7 @@ void decode_frame(alac_file *alac, - } - case 20: - case 32: -- fprintf(stderr, "FIXME: unimplemented sample size %i\n", alac->setinfo_sample_size); -+ xprintf("FIXME: unimplemented sample size %i\n", alac->setinfo_sample_size); - break; - default: - break; ---- libshairport-1.2.0.20310.1.orig/src/shairport.h -+++ libshairport-1.2.0.20310.1/src/shairport.h -@@ -59,11 +59,17 @@ extern "C" - { - #endif /* __cplusplus */ - -+struct printfPtr -+{ -+ int (*extprintf)(const char* msg, size_t msgSize); -+}; -+ - int shairport_main(int argc, char **argv); - void shairport_exit(void); - int shairport_loop(void); - int shairport_is_running(void); - void shairport_set_ao(struct AudioOutput *ao); -+void shairport_set_printf(struct printfPtr *funcPtr); - - #ifdef __cplusplus - } ---- libshairport-1.2.0.20310.1.orig/src/shairport.c -+++ libshairport-1.2.0.20310.1/src/shairport.c -@@ -31,6 +31,27 @@ - #include "shairport.h" - #include "hairtunes.h" - -+static struct printfPtr g_printf={NULL}; -+ -+int xprintf(const char *format, ...) -+{ -+ char dbg[2048]; -+ va_list args; -+ va_start(args, format); -+ vsnprintf(dbg, sizeof(dbg), format, args); -+ va_end(args); -+ if(g_printf.extprintf) -+ { -+ g_printf.extprintf(dbg, sizeof(dbg)); -+ } -+ else -+ { -+ printf(dbg); -+ } -+ -+ return 1; -+} -+ - #ifndef TRUE - #define TRUE (-1) - #endif -@@ -98,6 +119,11 @@ void shairport_set_ao(struct AudioOutput - { - g_ao=*ao; - } -+ -+void shairport_set_printf(struct printfPtr *funcPtr) -+{ -+ g_printf = *funcPtr; -+} - #endif - - #ifndef XBMC -@@ -106,7 +132,7 @@ int main(int argc, char **argv) - int shairport_main(int argc, char **argv) - #endif - { -- printf("initializing shairport\n"); -+ xprintf("initializing shairport\n",NULL); - char tHWID_Hex[HWID_SIZE * 2 + 1]; - char tKnownHwid[32]; - -@@ -185,22 +211,22 @@ int shairport_main(int argc, char **argv - } - else if(!strcmp(arg, "-h") || !strcmp(arg, "--help")) - { -- slog(LOG_INFO, "ShairPort version 0.05 C port - Airport Express emulator\n"); -- slog(LOG_INFO, "Usage:\nshairport [OPTION...]\n\nOptions:\n"); -- slog(LOG_INFO, " -a, --apname=AirPort Sets Airport name\n"); -- slog(LOG_INFO, " -p, --password=secret Sets Password (not working)\n"); -- slog(LOG_INFO, " -o, --server_port=5000 Sets Port for Avahi/dns-sd\n"); -- slog(LOG_INFO, " -b, --buffer=282 Sets Number of frames to buffer before beginning playback\n"); -- slog(LOG_INFO, " -d Daemon mode\n"); -- slog(LOG_INFO, " -q, --quiet Supresses all output.\n"); -- slog(LOG_INFO, " -v,-v2,-v3,-vv Various debugging levels\n"); -- slog(LOG_INFO, "\n"); -+ xprintf("ShairPort version 0.05 C port - Airport Express emulator\n"); -+ xprintf("Usage:\nshairport [OPTION...]\n\nOptions:\n"); -+ xprintf(" -a, --apname=AirPort Sets Airport name\n"); -+ xprintf(" -p, --password=secret Sets Password (not working)\n"); -+ xprintf(" -o, --server_port=5000 Sets Port for Avahi/dns-sd\n"); -+ xprintf(" -b, --buffer=282 Sets Number of frames to buffer before beginning playback\n"); -+ xprintf(" -d Daemon mode\n"); -+ xprintf(" -q, --quiet Supresses all output.\n"); -+ xprintf(" -v,-v2,-v3,-vv Various debugging levels\n"); -+ xprintf("\n"); - return 0; - } - } - - if ( buffer_start_fill < 30 || buffer_start_fill > BUFFER_FRAMES ) { -- fprintf(stderr, "buffer value must be > 30 and < %d\n", BUFFER_FRAMES); -+ xprintf("buffer value must be > 30 and < %d\n", BUFFER_FRAMES); - return(0); - } - -@@ -209,11 +235,11 @@ int shairport_main(int argc, char **argv - int tPid = fork(); - if(tPid < 0) - { -- exit(1); // Error on fork -+ //exit(1); // Error on fork - } - else if(tPid > 0) - { -- exit(0); -+ //exit(0); - } - else - { -@@ -254,10 +280,10 @@ int shairport_main(int argc, char **argv - sscanf(tHWID_Hex, "%02X%02X%02X%02X%02X%02X", &tHWID[0], &tHWID[1], &tHWID[2], &tHWID[3], &tHWID[4], &tHWID[5]); - } - -- slog(LOG_INFO, "LogLevel: %d\n", kCurrentLogLevel); -- slog(LOG_INFO, "AirName: %s\n", tServerName); -- slog(LOG_INFO, "HWID: %.*s\n", HWID_SIZE, tHWID+1); -- slog(LOG_INFO, "HWID_Hex(%d): %s\n", strlen(tHWID_Hex), tHWID_Hex); -+ xprintf("LogLevel: %d\n", kCurrentLogLevel); -+ xprintf("AirName: %s\n", tServerName); -+ xprintf("HWID: %.*s\n", HWID_SIZE, tHWID+1); -+ xprintf("HWID_Hex(%d): %s\n", strlen(tHWID_Hex), tHWID_Hex); - - if(tSimLevel >= 1) - { -@@ -271,12 +297,12 @@ int shairport_main(int argc, char **argv - #ifndef XBMC - startAvahi(tHWID_Hex, tServerName, tPort); - #endif -- slog(LOG_DEBUG_V, "Starting connection server: specified server port: %d\n", tPort); -+ xprintf("Starting connection server: specified server port: %d\n", tPort); - tServerSock = setupListenServer(&tAddrInfo, tPort); - if(tServerSock < 0) - { - freeaddrinfo(tAddrInfo); -- slog(LOG_INFO, "Error setting up server socket on port %d, try specifying a different port\n", tPort); -+ xprintf("Error setting up server socket on port %d, try specifying a different port\n", tPort); - return 0; - } - -@@ -303,7 +329,7 @@ int shairport_loop(void) - - int readsock; - -- slog(LOG_DEBUG_V, "Waiting for clients to connect\n"); -+ xprintf("Waiting for clients to connect\n"); - - while(m_running) - { -@@ -335,7 +361,7 @@ int shairport_loop(void) - { - freeaddrinfo(tAddrInfo); - tAddrInfo = NULL; -- slog(LOG_DEBUG, "...Accepted Client Connection..\n"); -+ xprintf("...Accepted Client Connection..\n"); - close(tServerSock); - handleClient(tClientSock, tPassword, tHWID); - //close(tClientSock); -@@ -343,11 +369,11 @@ int shairport_loop(void) - } - else - { -- slog(LOG_DEBUG_VV, "Child now busy handling new client\n"); -+ xprintf("Child now busy handling new client\n"); - close(tClientSock); - } - #else -- slog(LOG_DEBUG, "...Accepted Client Connection..\n"); -+ xprintf("...Accepted Client Connection..\n"); - handleClient(tClientSock, tPassword, tHWID); - #endif - } -@@ -357,7 +383,7 @@ int shairport_loop(void) - } - } - -- slog(LOG_DEBUG_VV, "Finished\n"); -+ xprintf("Finished\n"); - if(tAddrInfo != NULL) - { - freeaddrinfo(tAddrInfo); -@@ -416,7 +442,7 @@ int findEnd(char *tReadBuf) - - void handleClient(int pSock, char *pPassword, char *pHWADDR) - { -- slog(LOG_DEBUG_VV, "In Handle Client\n"); -+ xprintf("In Handle Client\n"); - fflush(stdout); - - socklen_t len; -@@ -435,7 +461,7 @@ void handleClient(int pSock, char *pPass - - // deal with both IPv4 and IPv6: - if (addr.ss_family == AF_INET) { -- slog(LOG_DEBUG_V, "Constructing ipv4 address\n"); -+ xprintf("Constructing ipv4 address\n"); - struct sockaddr_in *s = (struct sockaddr_in *)&addr; - port = ntohs(s->sin_port); - inet_ntop(AF_INET, &s->sin_addr, ipstr, sizeof ipstr); -@@ -455,20 +481,20 @@ void handleClient(int pSock, char *pPass - if(memcmp(&addr.bin[0], "\x00\x00\x00\x00" "\x00\x00\x00\x00" "\x00\x00\xff\xff", 12) == 0) - { - // its ipv4... -- slog(LOG_DEBUG_V, "Constructing ipv4 from ipv6 address\n"); -+ xprintf("Constructing ipv4 from ipv6 address\n"); - memcpy(ipbin, &addr.bin[12], 4); - ipbinlen = 4; - } - else - { -- slog(LOG_DEBUG_V, "Constructing ipv6 address\n"); -+ xprintf("Constructing ipv6 address\n"); - memcpy(ipbin, &s->sin6_addr, 16); - ipbinlen = 16; - } - } - -- slog(LOG_DEBUG_V, "Peer IP address: %s\n", ipstr); -- slog(LOG_DEBUG_V, "Peer port : %d\n", port); -+ xprintf("Peer IP address: %s\n", ipstr); -+ xprintf("Peer port : %d\n", port); - - int tMoreDataNeeded = 1; - struct keyring tKeys; -@@ -489,16 +515,16 @@ void handleClient(int pSock, char *pPass - tError = readDataFromClient(pSock, &(tConn.recv)); - if(!tError && strlen(tConn.recv.data) > 0) - { -- slog(LOG_DEBUG_VV, "Finished Reading some data from client\n"); -+ xprintf("Finished Reading some data from client\n"); - // parse client request - tMoreDataNeeded = parseMessage(&tConn, ipbin, ipbinlen, pHWADDR); - if(1 == tMoreDataNeeded) - { -- slog(LOG_DEBUG_VV, "\n\nNeed to read more data\n"); -+ xprintf("\n\nNeed to read more data\n"); - } - else if(-1 == tMoreDataNeeded) // Forked process down below ended. - { -- slog(LOG_DEBUG_V, "Forked Process ended...cleaning up\n"); -+ xprintf("Forked Process ended...cleaning up\n"); - cleanup(&tConn); - // pSock was already closed - return; -@@ -507,13 +533,13 @@ void handleClient(int pSock, char *pPass - } - else - { -- slog(LOG_DEBUG, "Error reading from socket, closing client\n"); -+ xprintf("Error reading from socket, closing client\n"); - // Error reading data....quit. - cleanup(&tConn); - return; - } - } -- slog(LOG_DEBUG_VV, "Writing: %d chars to socket\n", tConn.resp.current); -+ xprintf("Writing: %d chars to socket\n", tConn.resp.current); - //tConn->resp.data[tConn->resp.current-1] = '\0'; - writeDataToClient(pSock, &(tConn.resp)); - // Finished reading one message... -@@ -526,9 +552,9 @@ void handleClient(int pSock, char *pPass - - void writeDataToClient(int pSock, struct shairbuffer *pResponse) - { -- slog(LOG_DEBUG_VV, "\n----Beg Send Response Header----\n%.*s\n", pResponse->current, pResponse->data); -+ xprintf("\n----Beg Send Response Header----\n%.*s\n", pResponse->current, pResponse->data); - send(pSock, pResponse->data, pResponse->current,0); -- slog(LOG_DEBUG_VV, "----Send Response Header----\n"); -+ xprintf("----Send Response Header----\n"); - } - - int readDataFromClient(int pSock, struct shairbuffer *pClientBuffer) -@@ -541,7 +567,7 @@ int readDataFromClient(int pSock, struct - while(tRetval > 0 && tEnd < 0) - { - // Read from socket until \n\n, \r\n\r\n, or \r\r is found -- slog(LOG_DEBUG_V, "Waiting To Read...\n"); -+ xprintf("Waiting To Read...\n"); - fflush(stdout); - tRetval = read(pSock, tReadBuf, MAX_SIZE); - // if new buffer contains the end of request string, only copy partial buffer? -@@ -552,40 +578,40 @@ int readDataFromClient(int pSock, struct - { - pClientBuffer->marker = tEnd+1; // Marks start of content - } -- slog(SOCKET_LOG_LEVEL, "Found end of http request at: %d\n", tEnd); -+ xprintf("Found end of http request at: %d\n", tEnd); - fflush(stdout); - } - else - { - tEnd = MAX_SIZE; -- slog(SOCKET_LOG_LEVEL, "Read %d of data so far\n%s\n", tRetval, tReadBuf); -+ xprintf("Read %d of data so far\n%s\n", tRetval, tReadBuf); - fflush(stdout); - } - if(tRetval > 0) - { - // Copy read data into tReceive; -- slog(SOCKET_LOG_LEVEL, "Read %d data, using %d of it\n", tRetval, tEnd); -+ xprintf("Read %d data, using %d of it\n", tRetval, tEnd); - addNToShairBuffer(pClientBuffer, tReadBuf, tRetval); -- slog(LOG_DEBUG_VV, "Finished copying data\n"); -+ xprintf("Finished copying data\n"); - } - else - { -- slog(LOG_DEBUG, "Error reading data from socket, got: %d bytes", tRetval); -+ xprintf("Error reading data from socket, got: %d bytes", tRetval); - return tRetval; - } - } - if(tEnd + 1 != tRetval) - { -- slog(SOCKET_LOG_LEVEL, "Read more data after end of http request. %d instead of %d\n", tRetval, tEnd+1); -+ xprintf("Read more data after end of http request. %d instead of %d\n", tRetval, tEnd+1); - } -- slog(SOCKET_LOG_LEVEL, "Finished Reading Data:\n%s\nEndOfData\n", pClientBuffer->data); -+ xprintf("Finished Reading Data:\n%s\nEndOfData\n", pClientBuffer->data); - fflush(stdout); - return 0; - } - - char *getFromBuffer(char *pBufferPtr, const char *pField, int pLenAfterField, int *pReturnSize, char *pDelims) - { -- slog(LOG_DEBUG_V, "GettingFromBuffer: %s\n", pField); -+ xprintf("GettingFromBuffer: %s\n", pField); - char* tFound = strstr(pBufferPtr, pField); - int tSize = 0; - if(tFound != NULL) -@@ -606,7 +632,7 @@ char *getFromBuffer(char *pBufferPtr, co - } - - tSize = (int) (tShortest - tFound); -- slog(LOG_DEBUG_VV, "Found %.*s length: %d\n", tSize, tFound, tSize); -+ xprintf("Found %.*s length: %d\n", tSize, tFound, tSize); - if(pReturnSize != NULL) - { - *pReturnSize = tSize; -@@ -614,7 +640,7 @@ char *getFromBuffer(char *pBufferPtr, co - } - else - { -- slog(LOG_DEBUG_V, "Not Found\n"); -+ xprintf("Not Found\n"); - } - return tFound; - } -@@ -648,10 +674,10 @@ int buildAppleResponse(struct connection - { - char tTrim[tFoundSize + 2]; - getTrimmed(tFound, tFoundSize, TRUE, TRUE, tTrim); -- slog(LOG_DEBUG_VV, "HeaderChallenge: [%s] len: %d sizeFound: %d\n", tTrim, strlen(tTrim), tFoundSize); -+ xprintf("HeaderChallenge: [%s] len: %d sizeFound: %d\n", tTrim, strlen(tTrim), tFoundSize); - int tChallengeDecodeSize = 16; - char *tChallenge = decode_base64((unsigned char *)tTrim, tFoundSize, &tChallengeDecodeSize); -- slog(LOG_DEBUG_VV, "Challenge Decode size: %d expected 16\n", tChallengeDecodeSize); -+ xprintf("Challenge Decode size: %d expected 16\n", tChallengeDecodeSize); - - int tCurSize = 0; - unsigned char tChalResp[38]; -@@ -673,7 +699,7 @@ int buildAppleResponse(struct connection - } - - char *tTmp = encode_base64((unsigned char *)tChalResp, tCurSize); -- slog(LOG_DEBUG_VV, "Full sig: %s\n", tTmp); -+ xprintf("Full sig: %s\n", tTmp); - free(tTmp); - - // RSA Encrypt -@@ -722,10 +748,10 @@ int parseMessage(struct connection *pCon - { - if(isLogEnabledFor(HEADER_LOG_LEVEL)) - { -- slog(HEADER_LOG_LEVEL, "Content-Length: %s value -> %d\n", tContent, tContentSize); -+ xprintf("Content-Length: %s value -> %d\n", tContent, tContentSize); - if(pConn->recv.marker != 0) - { -- slog(HEADER_LOG_LEVEL, "ContentPtr has %d, but needs %d\n", -+ xprintf("ContentPtr has %d, but needs %d\n", - strlen(pConn->recv.data+pConn->recv.marker), tContentSize); - } - } -@@ -735,7 +761,7 @@ int parseMessage(struct connection *pCon - } - else - { -- slog(LOG_DEBUG_VV, "No content, header only\n"); -+ xprintf("No content, header only\n"); - } - - // "Creates" a new Response Header for our response message -@@ -748,7 +774,7 @@ int parseMessage(struct connection *pCon - { - tLen = 20; - } -- slog(LOG_INFO, "********** RECV %.*s **********\n", tLen, pConn->recv.data); -+ xprintf("********** RECV %.*s **********\n", tLen, pConn->recv.data); - } - - if(pConn->password != NULL) -@@ -758,7 +784,7 @@ int parseMessage(struct connection *pCon - - if(buildAppleResponse(pConn, pIpBin, pIpBinLen, pHWID)) // need to free sig - { -- slog(LOG_DEBUG_V, "Added AppleResponse to Apple-Challenge request\n"); -+ xprintf("Added AppleResponse to Apple-Challenge request\n"); - } - - // Find option, then based on option, do different actions. -@@ -778,14 +804,14 @@ int parseMessage(struct connection *pCon - int tKeySize = 0; - char tEncodedAesIV[tSize + 2]; - getTrimmed(tHeaderVal, tSize, TRUE, TRUE, tEncodedAesIV); -- slog(LOG_DEBUG_VV, "AESIV: [%.*s] Size: %d Strlen: %d\n", tSize, tEncodedAesIV, tSize, strlen(tEncodedAesIV)); -+ xprintf("AESIV: [%.*s] Size: %d Strlen: %d\n", tSize, tEncodedAesIV, tSize, strlen(tEncodedAesIV)); - char *tDecodedIV = decode_base64((unsigned char*) tEncodedAesIV, tSize, &tSize); - - // grab the key, copy it out of the receive buffer - tHeaderVal = getFromContent(tContent, "a=rsaaeskey", &tKeySize); - char tEncodedAesKey[tKeySize + 2]; // +1 for nl, +1 for \0 - getTrimmed(tHeaderVal, tKeySize, TRUE, TRUE, tEncodedAesKey); -- slog(LOG_DEBUG_VV, "AES KEY: [%s] Size: %d Strlen: %d\n", tEncodedAesKey, tKeySize, strlen(tEncodedAesKey)); -+ xprintf("AES KEY: [%s] Size: %d Strlen: %d\n", tEncodedAesKey, tKeySize, strlen(tEncodedAesKey)); - // remove base64 coding from key - char *tDecodedAesKey = decode_base64((unsigned char*) tEncodedAesKey, - tKeySize, &tKeySize); // Need to free DecodedAesKey -@@ -794,7 +820,7 @@ int parseMessage(struct connection *pCon - int tFmtpSize = 0; - char *tFmtp = getFromContent(tContent, "a=fmtp", &tFmtpSize); // Don't need to free - tFmtp = getTrimmedMalloc(tFmtp, tFmtpSize, TRUE, FALSE); // will need to free -- slog(LOG_DEBUG_VV, "Format: %s\n", tFmtp); -+ xprintf("Format: %s\n", tFmtp); - - RSA *rsa = loadKey(); - // Decrypt the binary aes key -@@ -803,11 +829,11 @@ int parseMessage(struct connection *pCon - if(RSA_private_decrypt(tKeySize, (unsigned char *)tDecodedAesKey, - (unsigned char*) tDecryptedKey, rsa, RSA_PKCS1_OAEP_PADDING) >= 0) - { -- slog(LOG_DEBUG, "Decrypted AES key from RSA Successfully\n"); -+ xprintf("Decrypted AES key from RSA Successfully\n"); - } - else - { -- slog(LOG_INFO, "Error Decrypting AES key from RSA\n"); -+ xprintf("Error Decrypting AES key from RSA\n"); - } - free(tDecodedAesKey); - RSA_free(rsa); -@@ -823,13 +849,13 @@ int parseMessage(struct connection *pCon - // struct comms *tComms = pConn->hairtunes; - // if (! (pipe(tComms->in) == 0 && pipe(tComms->out) == 0)) - // { --// slog(LOG_INFO, "Error setting up hairtunes communications...some things probably wont work very well.\n"); -+// xprintf("Error setting up hairtunes communications...some things probably wont work very well.\n"); - // } - - // Setup fork - char tPort[8] = "6000"; // get this from dup()'d stdout of child pid - -- printf("******** SETUP!!!!!\n"); -+ xprintf("******** SETUP!!!!!\n",NULL); - #ifndef XBMC - int tPid = fork(); - if(tPid == 0) -@@ -845,11 +871,11 @@ int parseMessage(struct connection *pCon - tFound = getFromSetup(pConn->recv.data, "timing_port", &tSize); - getTrimmed(tFound, tSize, 1, 0, tTPortStr); - -- slog(LOG_DEBUG_VV, "converting %s and %s from str->int\n", tCPortStr, tTPortStr); -+ xprintf("converting %s and %s from str->int\n", tCPortStr, tTPortStr); - int tControlport = atoi(tCPortStr); - int tTimingport = atoi(tTPortStr); - -- slog(LOG_DEBUG_V, "Got %d for CPort and %d for TPort\n", tControlport, tTimingport); -+ xprintf("Got %d for CPort and %d for TPort\n", tControlport, tTimingport); - char *tRtp = NULL; - char *tPipe = NULL; - char *tAoDriver = NULL; -@@ -884,7 +910,7 @@ int parseMessage(struct connection *pCon - tDataport, tRtp, tPipe, tAoDriver, tAoDeviceName, tAoDeviceId); - #ifndef XBMC - // Quit when finished. -- slog(LOG_DEBUG, "Returned from hairtunes init....returning -1, should close out this whole side of the fork\n"); -+ xprintf("Returned from hairtunes init....returning -1, should close out this whole side of the fork\n"); - return -1; - } - else if(tPid >0) -@@ -897,7 +923,7 @@ int parseMessage(struct connection *pCon - int tRead = read(tComms->out[0], tFromHairtunes, 80); - if(tRead <= 0) - { -- slog(LOG_INFO, "Error reading port from hairtunes function, assuming default port: %d\n", tPort); -+ xprintf("Error reading port from hairtunes function, assuming default port: %d\n", tPort); - } - else - { -@@ -909,7 +935,7 @@ int parseMessage(struct connection *pCon - } - else - { -- slog(LOG_INFO, "Read %d bytes, Error translating %s into a port\n", tRead, tFromHairtunes); -+ xprintf("Read %d bytes, Error translating %s into a port\n", tRead, tFromHairtunes); - } - } - -@@ -930,7 +956,7 @@ int parseMessage(struct connection *pCon - } - else - { -- slog(LOG_INFO, "Error forking process....dere' be errors round here.\n"); -+ xprintf("Error forking process....dere' be errors round here.\n"); - return -1; - } - #endif -@@ -942,7 +968,7 @@ int parseMessage(struct connection *pCon - propogateCSeq(pConn); - #ifndef XBMC - close(pConn->hairtunes->in[1]); -- slog(LOG_DEBUG, "Tearing down connection, closing pipes\n"); -+ xprintf("Tearing down connection, closing pipes\n"); - #else - hairtunes_cleanup(); - #endif -@@ -964,7 +990,7 @@ int parseMessage(struct connection *pCon - propogateCSeq(pConn); - int tSize = 0; - char *tVol = getFromHeader(pConn->recv.data, "volume", &tSize); -- slog(LOG_DEBUG_VV, "About to write [vol: %.*s] data to hairtunes\n", tSize, tVol); -+ xprintf("About to write [vol: %.*s] data to hairtunes\n", tSize, tVol); - // TBD VOLUME - #ifndef XBMC - write(pConn->hairtunes->in[1], "vol: ", 5); -@@ -973,11 +999,11 @@ int parseMessage(struct connection *pCon - #else - hairtunes_setvolume(atof(tVol)); - #endif -- slog(LOG_DEBUG_VV, "Finished writing data write data to hairtunes\n"); -+ xprintf("Finished writing data write data to hairtunes\n"); - } - else - { -- slog(LOG_DEBUG, "\n\nUn-Handled recv: %s\n", pConn->recv.data); -+ xprintf("\n\nUn-Handled recv: %s\n", pConn->recv.data); - propogateCSeq(pConn); - } - addToShairBuffer(&(pConn->resp), "\r\n"); -@@ -1056,7 +1082,7 @@ int startAvahi(const char *pHWStr, const - char tName[100 + HWID_SIZE + 3]; - if(strlen(pServerName) > tMaxServerName) - { -- slog(LOG_INFO,"Hey dog, we see you like long server names, " -+ xprintf("Hey dog, we see you like long server names, " - "so we put a strncat in our command so we don't buffer overflow, while you listen to your flow.\n" - "We just used the first %d characters. Pick something shorter if you want\n", tMaxServerName); - } -@@ -1067,7 +1093,7 @@ int startAvahi(const char *pHWStr, const - strcat(tName, pHWStr); - strcat(tName, "@"); - strncat(tName, pServerName, tMaxServerName); -- slog(AVAHI_LOG_LEVEL, "Avahi/DNS-SD Name: %s\n", tName); -+ xprintf("Avahi/DNS-SD Name: %s\n", tName); - - execlp("avahi-publish-service", "avahi-publish-service", tName, - "_raop._tcp", tPort, "tp=UDP","sm=false","sv=false","ek=1","et=0,1", -@@ -1079,12 +1105,12 @@ int startAvahi(const char *pHWStr, const - perror("error"); - } - -- slog(LOG_INFO, "Bad error... couldn't find or failed to run: avahi-publish-service OR dns-sd\n"); -- exit(1); -+ xprintf("Bad error... couldn't find or failed to run: avahi-publish-service OR dns-sd\n"); -+ //exit(1); - } - else - { -- slog(LOG_DEBUG_VV, "Avahi/DNS-SD started on PID: %d\n", tPid); -+ xprintf("Avahi/DNS-SD started on PID: %d\n", tPid); - } - return tPid; - } -@@ -1092,7 +1118,7 @@ int startAvahi(const char *pHWStr, const - - void printBufferInfo(struct shairbuffer *pBuf, int pLevel) - { -- slog(pLevel, "Buffer: [%s] size: %d maxchars:%d\n", pBuf->data, pBuf->current, pBuf->maxsize/sizeof(char)); -+ xprintf("Buffer: [%s] size: %d maxchars:%d\n", pBuf->data, pBuf->current, pBuf->maxsize/sizeof(char)); - } - - int getAvailChars(struct shairbuffer *pBuf) -@@ -1173,7 +1199,8 @@ void slog(int pLevel, char *pFormat, ... - { - va_list argp; - va_start(argp, pFormat); -- vprintf(pFormat, argp); -+ xprintf(pFormat, argp); -+ //vprintf(pFormat, argp); - va_end(argp); - } - //#endif -@@ -1227,9 +1254,9 @@ void initBuffer(struct shairbuffer *pBuf - { - if(pBuf->data != NULL) - { -- slog(LOG_DEBUG_VV, "Hrm, buffer wasn't cleaned up....trying to free\n"); -+ xprintf("Hrm, buffer wasn't cleaned up....trying to free\n"); - free(pBuf->data); -- slog(LOG_DEBUG_VV, "Free didn't seem to seg fault....huzzah\n"); -+ xprintf("Free didn't seem to seg fault....huzzah\n"); - } - pBuf->current = 0; - pBuf->marker = 0; -@@ -1287,6 +1314,6 @@ RSA *loadKey() - BIO *tBio = BIO_new_mem_buf(AIRPORT_PRIVATE_KEY, -1); - RSA *rsa = PEM_read_bio_RSAPrivateKey(tBio, NULL, NULL, NULL); //NULL, NULL, NULL); - BIO_free(tBio); -- slog(RSA_LOG_LEVEL, "RSA Key: %d\n", RSA_check_key(rsa)); -+ xprintf("RSA Key: %d\n", RSA_check_key(rsa)); - return rsa; - } diff -Nru libshairport-1.2.0.20310.1/debian/patches/007_fix_syslog_defines.patch libshairport-1.2.1~git20120110.aeb4987/debian/patches/007_fix_syslog_defines.patch --- libshairport-1.2.0.20310.1/debian/patches/007_fix_syslog_defines.patch 2011-11-10 19:24:19.000000000 +0000 +++ libshairport-1.2.1~git20120110.aeb4987/debian/patches/007_fix_syslog_defines.patch 1970-01-01 00:00:00.000000000 +0000 @@ -1,49 +0,0 @@ -Description: Upstream changes introduced in version 1.2.0.20310.1-0ubuntu1~oneiric1 - This patch has been created by dpkg-source during the package build. - Here's the last changelog entry, hopefully it gives details on why - those changes were made: - . - libshairport (1.2.0.20310.1-0ubuntu1~oneiric1) oneiric; urgency=low - . - * reorganize patches - . - The person named in the Author field signed this changelog entry. -Author: Mario Sitz - ---- -The information above should follow the Patch Tagging Guidelines, please -checkout http://dep.debian.net/deps/dep3/ to learn about the format. Here -are templates for supplementary fields that you might want to add: - -Origin: , -Bug: -Bug-Debian: http://bugs.debian.org/ -Bug-Ubuntu: https://launchpad.net/bugs/ -Forwarded: -Reviewed-By: -Last-Update: - ---- libshairport-1.2.0.20310.1.orig/src/shairport.h -+++ libshairport-1.2.0.20310.1/src/shairport.h -@@ -16,10 +16,17 @@ - - #define HWID_SIZE 6 - #define SHAIRPORT_LOG 1 --#define LOG_INFO 1 --#define LOG_DEBUG 5 --#define LOG_DEBUG_V 6 --#define LOG_DEBUG_VV 7 -+ -+#ifndef LOG_INFO -+#define LOG_INFO 5 -+#endif -+ -+#ifndef LOG_DEBUG -+#define LOG_DEBUG 6 -+#endif -+ -+#define LOG_DEBUG_V 7 -+#define LOG_DEBUG_VV 8 - - struct shairbuffer - { diff -Nru libshairport-1.2.0.20310.1/debian/patches/008_add_missing_libs.patch libshairport-1.2.1~git20120110.aeb4987/debian/patches/008_add_missing_libs.patch --- libshairport-1.2.0.20310.1/debian/patches/008_add_missing_libs.patch 2011-11-10 19:25:04.000000000 +0000 +++ libshairport-1.2.1~git20120110.aeb4987/debian/patches/008_add_missing_libs.patch 1970-01-01 00:00:00.000000000 +0000 @@ -1,45 +0,0 @@ -Description: Upstream changes introduced in version 1.2.0.20310.1-0ubuntu1~oneiric1 - This patch has been created by dpkg-source during the package build. - Here's the last changelog entry, hopefully it gives details on why - those changes were made: - . - libshairport (1.2.0.20310.1-0ubuntu1~oneiric1) oneiric; urgency=low - . - * reorganize patches - . - The person named in the Author field signed this changelog entry. -Author: Mario Sitz - ---- -The information above should follow the Patch Tagging Guidelines, please -checkout http://dep.debian.net/deps/dep3/ to learn about the format. Here -are templates for supplementary fields that you might want to add: - -Origin: , -Bug: -Bug-Debian: http://bugs.debian.org/ -Bug-Ubuntu: https://launchpad.net/bugs/ -Forwarded: -Reviewed-By: -Last-Update: - ---- libshairport-1.2.0.20310.1.orig/configure.in -+++ libshairport-1.2.0.20310.1/configure.in -@@ -11,8 +11,9 @@ AC_PROG_LIBTOOL - - # Checks for libraries. - #AC_CHECK_LIB([c], [main]) --#AC_CHECK_LIB([m], [main]) -+AC_CHECK_LIB([m], [main]) - AC_CHECK_LIB([ssl], [main],, AC_MSG_ERROR($missing_library)) -+AC_CHECK_LIB([crypto], [main],, AC_MSG_ERROR($missing_library)) - AC_CHECK_LIB([pthread], [main],, AC_MSG_ERROR($missing_library)) - - OUTPUT_FILES="Makefile" -@@ -21,4 +22,4 @@ LIBDIR=$PREFIX - - AC_CONFIG_FILES([${OUTPUT_FILES}]) - AC_OUTPUT(Makefile src/Makefile) --AC_OUTPUT -\ No newline at end of file -+AC_OUTPUT diff -Nru libshairport-1.2.0.20310.1/debian/patches/009_fix_ipv6.patch libshairport-1.2.1~git20120110.aeb4987/debian/patches/009_fix_ipv6.patch --- libshairport-1.2.0.20310.1/debian/patches/009_fix_ipv6.patch 2012-01-10 19:53:14.000000000 +0000 +++ libshairport-1.2.1~git20120110.aeb4987/debian/patches/009_fix_ipv6.patch 1970-01-01 00:00:00.000000000 +0000 @@ -1,22 +0,0 @@ ---- libshairport-1.2.0.20310.1.orig/src/socketlib.c -+++ libshairport-1.2.0.20310.1/src/socketlib.c -@@ -48,7 +48,7 @@ int common_setup(struct addrinfo *pAddrI - if((tSock==-1) && (pAddrInfo->ai_family == AF_INET6) && (errno == EAFNOSUPPORT)) - { - //Fallback to ipv4 -- perror("Failed to create ipv6 socket. Trying ipv4"); -+ xprintf("Failed to create ipv6 socket. Trying ipv4"); - pAddrInfo->ai_family = AF_INET; - tSock = socket(pAddrInfo->ai_family, pAddrInfo->ai_socktype, 0); - } -@@ -158,8 +158,8 @@ int setupListenServer(struct addrinfo ** - sprintf(tService, "%d", pPort); // copies port to string - int tFamily = AF_INET; - #ifdef AF_INET6 -- //printf("Listening on IPv6 Socket\n"); -- //tFamily = AF_INET6; -+ xprintf("Listening on IPv6 Socket\n"); -+ tFamily = AF_INET6; - #else - //printf("Listening on IPv4 Socket"); - #endif diff -Nru libshairport-1.2.0.20310.1/debian/patches/999_fix_configure_headers.patch libshairport-1.2.1~git20120110.aeb4987/debian/patches/999_fix_configure_headers.patch --- libshairport-1.2.0.20310.1/debian/patches/999_fix_configure_headers.patch 2011-11-10 19:43:28.000000000 +0000 +++ libshairport-1.2.1~git20120110.aeb4987/debian/patches/999_fix_configure_headers.patch 1970-01-01 00:00:00.000000000 +0000 @@ -1,130 +0,0 @@ ---- libshairport-1.2.0.20310.1.orig/config.h.in -+++ libshairport-1.2.0.20310.1/config.h.in -@@ -6,6 +6,12 @@ - /* Define to 1 if you have the header file. */ - #undef HAVE_INTTYPES_H - -+/* Define to 1 if you have the `crypto' library (-lcrypto). */ -+#undef HAVE_LIBCRYPTO -+ -+/* Define to 1 if you have the `m' library (-lm). */ -+#undef HAVE_LIBM -+ - /* Define to 1 if you have the `pthread' library (-lpthread). */ - #undef HAVE_LIBPTHREAD - ---- libshairport-1.2.0.20310.1.orig/configure -+++ libshairport-1.2.0.20310.1/configure -@@ -11116,7 +11116,45 @@ CC="$lt_save_CC" - - # Checks for libraries. - #AC_CHECK_LIB([c], [main]) --#AC_CHECK_LIB([m], [main]) -+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for main in -lm" >&5 -+$as_echo_n "checking for main in -lm... " >&6; } -+if ${ac_cv_lib_m_main+:} false; then : -+ $as_echo_n "(cached) " >&6 -+else -+ ac_check_lib_save_LIBS=$LIBS -+LIBS="-lm $LIBS" -+cat confdefs.h - <<_ACEOF >conftest.$ac_ext -+/* end confdefs.h. */ -+ -+ -+int -+main () -+{ -+return main (); -+ ; -+ return 0; -+} -+_ACEOF -+if ac_fn_c_try_link "$LINENO"; then : -+ ac_cv_lib_m_main=yes -+else -+ ac_cv_lib_m_main=no -+fi -+rm -f core conftest.err conftest.$ac_objext \ -+ conftest$ac_exeext conftest.$ac_ext -+LIBS=$ac_check_lib_save_LIBS -+fi -+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_m_main" >&5 -+$as_echo "$ac_cv_lib_m_main" >&6; } -+if test "x$ac_cv_lib_m_main" = xyes; then : -+ cat >>confdefs.h <<_ACEOF -+#define HAVE_LIBM 1 -+_ACEOF -+ -+ LIBS="-lm $LIBS" -+ -+fi -+ - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for main in -lssl" >&5 - $as_echo_n "checking for main in -lssl... " >&6; } - if ${ac_cv_lib_ssl_main+:} false; then : -@@ -11158,6 +11196,47 @@ else - as_fn_error $? "$missing_library" "$LINENO" 5 - fi - -+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for main in -lcrypto" >&5 -+$as_echo_n "checking for main in -lcrypto... " >&6; } -+if ${ac_cv_lib_crypto_main+:} false; then : -+ $as_echo_n "(cached) " >&6 -+else -+ ac_check_lib_save_LIBS=$LIBS -+LIBS="-lcrypto $LIBS" -+cat confdefs.h - <<_ACEOF >conftest.$ac_ext -+/* end confdefs.h. */ -+ -+ -+int -+main () -+{ -+return main (); -+ ; -+ return 0; -+} -+_ACEOF -+if ac_fn_c_try_link "$LINENO"; then : -+ ac_cv_lib_crypto_main=yes -+else -+ ac_cv_lib_crypto_main=no -+fi -+rm -f core conftest.err conftest.$ac_objext \ -+ conftest$ac_exeext conftest.$ac_ext -+LIBS=$ac_check_lib_save_LIBS -+fi -+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_crypto_main" >&5 -+$as_echo "$ac_cv_lib_crypto_main" >&6; } -+if test "x$ac_cv_lib_crypto_main" = xyes; then : -+ cat >>confdefs.h <<_ACEOF -+#define HAVE_LIBCRYPTO 1 -+_ACEOF -+ -+ LIBS="-lcrypto $LIBS" -+ -+else -+ as_fn_error $? "$missing_library" "$LINENO" 5 -+fi -+ - { $as_echo "$as_me:${as_lineno-$LINENO}: checking for main in -lpthread" >&5 - $as_echo_n "checking for main in -lpthread... " >&6; } - if ${ac_cv_lib_pthread_main+:} false; then : -@@ -15954,3 +16033,4 @@ if test -n "$ac_unrecognized_opts" && te - { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: unrecognized options: $ac_unrecognized_opts" >&5 - $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2;} - fi -+ ---- libshairport-1.2.0.20310.1.orig/src/Makefile.in -+++ libshairport-1.2.0.20310.1/src/Makefile.in -@@ -210,8 +210,8 @@ top_build_prefix = @top_build_prefix@ - top_builddir = @top_builddir@ - top_srcdir = @top_srcdir@ - lib_LTLIBRARIES = libshairport.la --library_includedir = $(includedir) --library_include_HEADERS = shairport.h -+library_includedir = $(includedir)/shairport -+library_include_HEADERS = shairport.h ao.h socketlib.h - libshairport_la_SOURCES = shairport.c hairtunes.c socketlib.c alac.c - libshairport_la_LDFLAGS = -dynamiclib - all: all-am diff -Nru libshairport-1.2.0.20310.1/debian/patches/series libshairport-1.2.1~git20120110.aeb4987/debian/patches/series --- libshairport-1.2.0.20310.1/debian/patches/series 2012-01-10 19:53:34.000000000 +0000 +++ libshairport-1.2.1~git20120110.aeb4987/debian/patches/series 1970-01-01 00:00:00.000000000 +0000 @@ -1,11 +0,0 @@ -001_add_ao.patch -002_fix_install_header.patch -003_fix_deadlock.patch -004_fix_bad_access.patch -005_fix_shutdown.patch -006_no_printf.patch -007_fix_syslog_defines.patch -008_add_missing_libs.patch -009_fix_ipv6.patch -999_fix_configure_headers.patch - diff -Nru libshairport-1.2.0.20310.1/debian/rules libshairport-1.2.1~git20120110.aeb4987/debian/rules --- libshairport-1.2.0.20310.1/debian/rules 2011-11-10 19:30:20.000000000 +0000 +++ libshairport-1.2.1~git20120110.aeb4987/debian/rules 2012-01-11 04:37:07.000000000 +0000 @@ -1,19 +1,4 @@ #!/usr/bin/make -f -# Set CFLAGS to DEB_CFLAGS -CFLAGS=$(DEB_CFLAGS) - -# Uncomment this to turn on verbose mode. -#export DH_VERBOSE=1 - %: dh $@ --parallel - -override_dh_configure: configure - autoreconf -vif - ./configure - -override_dh_install: - dh_install - mkdir -p debian/libshairport-dev/usr/lib/pkgconfig/ - cp debian/libshairport.pc debian/libshairport-dev/usr/lib/pkgconfig/ diff -Nru libshairport-1.2.0.20310.1/debian/source/lintian-overrides libshairport-1.2.1~git20120110.aeb4987/debian/source/lintian-overrides --- libshairport-1.2.0.20310.1/debian/source/lintian-overrides 1970-01-01 00:00:00.000000000 +0000 +++ libshairport-1.2.1~git20120110.aeb4987/debian/source/lintian-overrides 2012-01-11 04:37:07.000000000 +0000 @@ -0,0 +1,2 @@ +# Only Build-Depends on debhelper (>= 8.1.3~) is needed, so ignore this. +libshairport source: package-needs-versioned-debhelper-build-depends 9 diff -Nru libshairport-1.2.0.20310.1/debian/source/options libshairport-1.2.1~git20120110.aeb4987/debian/source/options --- libshairport-1.2.0.20310.1/debian/source/options 1970-01-01 00:00:00.000000000 +0000 +++ libshairport-1.2.1~git20120110.aeb4987/debian/source/options 2012-01-11 04:37:07.000000000 +0000 @@ -0,0 +1,2 @@ +unapply-patches +abort-on-upstream-changes diff -Nru libshairport-1.2.0.20310.1/debian/watch libshairport-1.2.1~git20120110.aeb4987/debian/watch --- libshairport-1.2.0.20310.1/debian/watch 1970-01-01 00:00:00.000000000 +0000 +++ libshairport-1.2.1~git20120110.aeb4987/debian/watch 2012-01-11 04:43:59.000000000 +0000 @@ -0,0 +1 @@ +# There are no upstream releases Binary files /tmp/oYL0Sn27SZ/libshairport-1.2.0.20310.1/._INSTALL and /tmp/Wgyqs1Jfgh/libshairport-1.2.1~git20120110.aeb4987/._INSTALL differ diff -Nru libshairport-1.2.0.20310.1/libshairport.pc.in libshairport-1.2.1~git20120110.aeb4987/libshairport.pc.in --- libshairport-1.2.0.20310.1/libshairport.pc.in 1970-01-01 00:00:00.000000000 +0000 +++ libshairport-1.2.1~git20120110.aeb4987/libshairport.pc.in 2012-01-11 04:34:34.000000000 +0000 @@ -0,0 +1,12 @@ +# libshairport pkg-config file + +prefix=@prefix@ +exec_prefix=@exec_prefix@ +libdir=@libdir@ +includedir=@includedir@ + +Name: libshairport +Description: airport implementation +Version: @PACKAGE_VERSION@ +Libs: -L${libdir} -lshairport +Cflags: -I${includedir} diff -Nru libshairport-1.2.0.20310.1/ltmain.sh libshairport-1.2.1~git20120110.aeb4987/ltmain.sh --- libshairport-1.2.0.20310.1/ltmain.sh 2011-11-10 19:35:49.000000000 +0000 +++ libshairport-1.2.1~git20120110.aeb4987/ltmain.sh 2012-01-11 04:34:38.000000000 +0000 @@ -1,9 +1,9 @@ -# libtool (GNU libtool) 2.4 +# libtool (GNU libtool) 2.4.2 # Written by Gordon Matzigkeit , 1996 # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, 2006, -# 2007, 2008, 2009, 2010 Free Software Foundation, Inc. +# 2007, 2008, 2009, 2010, 2011 Free Software Foundation, Inc. # This is free software; see the source for copying conditions. There is NO # warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. @@ -41,6 +41,7 @@ # --quiet, --silent don't print informational messages # --no-quiet, --no-silent # print informational messages (default) +# --no-warn don't display warning messages # --tag=TAG use configuration variables from tag TAG # -v, --verbose print more informational messages than default # --no-verbose don't print the extra informational messages @@ -69,7 +70,7 @@ # compiler: $LTCC # compiler flags: $LTCFLAGS # linker: $LD (gnu? $with_gnu_ld) -# $progname: (GNU libtool) 2.4 Debian-2.4-2ubuntu1 +# $progname: (GNU libtool) 2.4.2 Debian-2.4.2-1 # automake: $automake_version # autoconf: $autoconf_version # @@ -79,9 +80,9 @@ PROGRAM=libtool PACKAGE=libtool -VERSION="2.4 Debian-2.4-2ubuntu1" +VERSION="2.4.2 Debian-2.4.2-1" TIMESTAMP="" -package_revision=1.3293 +package_revision=1.3337 # Be Bourne compatible if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then @@ -136,15 +137,10 @@ : ${CP="cp -f"} test "${ECHO+set}" = set || ECHO=${as_echo-'printf %s\n'} -: ${EGREP="/bin/grep -E"} -: ${FGREP="/bin/grep -F"} -: ${GREP="/bin/grep"} -: ${LN_S="ln -s"} : ${MAKE="make"} : ${MKDIR="mkdir"} : ${MV="mv -f"} : ${RM="rm -f"} -: ${SED="/bin/sed"} : ${SHELL="${CONFIG_SHELL-/bin/sh}"} : ${Xsed="$SED -e 1s/^X//"} @@ -387,7 +383,7 @@ ;; *) save_IFS="$IFS" - IFS=: + IFS=${PATH_SEPARATOR-:} for progdir in $PATH; do IFS="$save_IFS" test -x "$progdir/$progname" && break @@ -771,8 +767,8 @@ s*\$LTCFLAGS*'"$LTCFLAGS"'* s*\$LD*'"$LD"'* s/\$with_gnu_ld/'"$with_gnu_ld"'/ - s/\$automake_version/'"`(automake --version) 2>/dev/null |$SED 1q`"'/ - s/\$autoconf_version/'"`(autoconf --version) 2>/dev/null |$SED 1q`"'/ + s/\$automake_version/'"`(${AUTOMAKE-automake} --version) 2>/dev/null |$SED 1q`"'/ + s/\$autoconf_version/'"`(${AUTOCONF-autoconf} --version) 2>/dev/null |$SED 1q`"'/ p d } @@ -1052,6 +1048,7 @@ opt_help=false opt_help_all=false opt_silent=: +opt_warning=: opt_verbose=: opt_silent=false opt_verbose=false @@ -1120,6 +1117,10 @@ opt_silent=false func_append preserve_args " $opt" ;; + --no-warning|--no-warn) + opt_warning=false +func_append preserve_args " $opt" + ;; --no-verbose) opt_verbose=false func_append preserve_args " $opt" @@ -2059,7 +2060,7 @@ *.[cCFSifmso] | \ *.ada | *.adb | *.ads | *.asm | \ *.c++ | *.cc | *.ii | *.class | *.cpp | *.cxx | \ - *.[fF][09]? | *.for | *.java | *.obj | *.sx | *.cu | *.cup) + *.[fF][09]? | *.for | *.java | *.go | *.obj | *.sx | *.cu | *.cup) func_xform "$libobj" libobj=$func_xform_result ;; @@ -3201,11 +3202,13 @@ # Set up the ranlib parameters. oldlib="$destdir/$name" + func_to_tool_file "$oldlib" func_convert_file_msys_to_w32 + tool_oldlib=$func_to_tool_file_result func_show_eval "$install_prog \$file \$oldlib" 'exit $?' if test -n "$stripme" && test -n "$old_striplib"; then - func_show_eval "$old_striplib $oldlib" 'exit $?' + func_show_eval "$old_striplib $tool_oldlib" 'exit $?' fi # Do each command in the postinstall commands. @@ -3470,7 +3473,7 @@ # linked before any other PIC object. But we must not use # pic_flag when linking with -static. The problem exists in # FreeBSD 2.2.6 and is fixed in FreeBSD 3.1. - *-*-freebsd2*|*-*-freebsd3.0*|*-*-freebsdelf3.0*) + *-*-freebsd2.*|*-*-freebsd3.0*|*-*-freebsdelf3.0*) pic_flag_for_symtable=" $pic_flag -DFREEBSD_WORKAROUND" ;; *-*-hpux*) pic_flag_for_symtable=" $pic_flag" ;; @@ -3982,14 +3985,17 @@ # launches target application with the remaining arguments. func_exec_program () { - for lt_wr_arg - do - case \$lt_wr_arg in - --lt-*) ;; - *) set x \"\$@\" \"\$lt_wr_arg\"; shift;; - esac - shift - done + case \" \$* \" in + *\\ --lt-*) + for lt_wr_arg + do + case \$lt_wr_arg in + --lt-*) ;; + *) set x \"\$@\" \"\$lt_wr_arg\"; shift;; + esac + shift + done ;; + esac func_exec_program_core \${1+\"\$@\"} } @@ -5057,9 +5063,15 @@ { EOF func_emit_wrapper yes | - $SED -e 's/\([\\"]\)/\\\1/g' \ - -e 's/^/ fputs ("/' -e 's/$/\\n", f);/' - + $SED -n -e ' +s/^\(.\{79\}\)\(..*\)/\1\ +\2/ +h +s/\([\\"]\)/\\\1/g +s/$/\\n/ +s/\([^\n]*\).*/ fputs ("\1", f);/p +g +D' cat <<"EOF" } EOF @@ -5643,7 +5655,8 @@ continue ;; - -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe|-threads) + -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe \ + |-threads|-fopenmp|-openmp|-mp|-xopenmp|-omp|-qsmp=*) func_append compiler_flags " $arg" func_append compile_command " $arg" func_append finalize_command " $arg" @@ -6150,7 +6163,8 @@ lib= found=no case $deplib in - -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe|-threads) + -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe \ + |-threads|-fopenmp|-openmp|-mp|-xopenmp|-omp|-qsmp=*) if test "$linkmode,$pass" = "prog,link"; then compile_deplibs="$deplib $compile_deplibs" finalize_deplibs="$deplib $finalize_deplibs" @@ -6834,7 +6848,7 @@ test "$hardcode_direct_absolute" = no; then add="$dir/$linklib" elif test "$hardcode_minus_L" = yes; then - add_dir="-L$dir" + add_dir="-L$absdir" # Try looking first in the location we're being installed to. if test -n "$inst_prefix_dir"; then case $libdir in @@ -7319,6 +7333,7 @@ # which has an extra 1 added just for fun # case $version_type in + # correct linux to gnu/linux during the next big refactor darwin|linux|osf|windows|none) func_arith $number_major + $number_minor current=$func_arith_result @@ -7438,7 +7453,7 @@ versuffix="$major.$revision" ;; - linux) + linux) # correct to gnu/linux during the next big refactor func_arith $current - $age major=.$func_arith_result versuffix="$major.$age.$revision" @@ -8026,6 +8041,11 @@ # Test again, we may have decided not to build it any more if test "$build_libtool_libs" = yes; then + # Remove ${wl} instances when linking with ld. + # FIXME: should test the right _cmds variable. + case $archive_cmds in + *\$LD\ *) wl= ;; + esac if test "$hardcode_into_libs" = yes; then # Hardcode the library paths hardcode_libdirs= @@ -8056,7 +8076,7 @@ elif test -n "$runpath_var"; then case "$perm_rpath " in *" $libdir "*) ;; - *) func_apped perm_rpath " $libdir" ;; + *) func_append perm_rpath " $libdir" ;; esac fi done @@ -8064,11 +8084,7 @@ if test -n "$hardcode_libdir_separator" && test -n "$hardcode_libdirs"; then libdir="$hardcode_libdirs" - if test -n "$hardcode_libdir_flag_spec_ld"; then - eval dep_rpath=\"$hardcode_libdir_flag_spec_ld\" - else - eval dep_rpath=\"$hardcode_libdir_flag_spec\" - fi + eval "dep_rpath=\"$hardcode_libdir_flag_spec\"" fi if test -n "$runpath_var" && test -n "$perm_rpath"; then # We should set the runpath_var. @@ -9158,6 +9174,8 @@ esac done fi + func_to_tool_file "$oldlib" func_convert_file_msys_to_w32 + tool_oldlib=$func_to_tool_file_result eval cmds=\"$old_archive_cmds\" func_len " $cmds" @@ -9267,7 +9285,8 @@ *.la) func_basename "$deplib" name="$func_basename_result" - eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib` + func_resolve_sysroot "$deplib" + eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $func_resolve_sysroot_result` test -z "$libdir" && \ func_fatal_error "\`$deplib' is not a valid libtool archive" func_append newdependency_libs " ${lt_sysroot:+=}$libdir/$name" diff -Nru libshairport-1.2.0.20310.1/m4/libtool.m4 libshairport-1.2.1~git20120110.aeb4987/m4/libtool.m4 --- libshairport-1.2.0.20310.1/m4/libtool.m4 1970-01-01 00:00:00.000000000 +0000 +++ libshairport-1.2.1~git20120110.aeb4987/m4/libtool.m4 2012-01-11 04:34:38.000000000 +0000 @@ -0,0 +1,8001 @@ +# libtool.m4 - Configure libtool for the host system. -*-Autoconf-*- +# +# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, +# 2006, 2007, 2008, 2009, 2010, 2011 Free Software +# Foundation, Inc. +# Written by Gordon Matzigkeit, 1996 +# +# This file is free software; the Free Software Foundation gives +# unlimited permission to copy and/or distribute it, with or without +# modifications, as long as this notice is preserved. + +m4_define([_LT_COPYING], [dnl +# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, +# 2006, 2007, 2008, 2009, 2010, 2011 Free Software +# Foundation, Inc. +# Written by Gordon Matzigkeit, 1996 +# +# This file is part of GNU Libtool. +# +# GNU Libtool is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# As a special exception to the GNU General Public License, +# if you distribute this file as part of a program or library that +# is built using GNU Libtool, you may include this file under the +# same distribution terms that you use for the rest of that program. +# +# GNU Libtool is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with GNU Libtool; see the file COPYING. If not, a copy +# can be downloaded from http://www.gnu.org/licenses/gpl.html, or +# obtained by writing to the Free Software Foundation, Inc., +# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. +]) + +# serial 57 LT_INIT + + +# LT_PREREQ(VERSION) +# ------------------ +# Complain and exit if this libtool version is less that VERSION. +m4_defun([LT_PREREQ], +[m4_if(m4_version_compare(m4_defn([LT_PACKAGE_VERSION]), [$1]), -1, + [m4_default([$3], + [m4_fatal([Libtool version $1 or higher is required], + 63)])], + [$2])]) + + +# _LT_CHECK_BUILDDIR +# ------------------ +# Complain if the absolute build directory name contains unusual characters +m4_defun([_LT_CHECK_BUILDDIR], +[case `pwd` in + *\ * | *\ *) + AC_MSG_WARN([Libtool does not cope well with whitespace in `pwd`]) ;; +esac +]) + + +# LT_INIT([OPTIONS]) +# ------------------ +AC_DEFUN([LT_INIT], +[AC_PREREQ([2.58])dnl We use AC_INCLUDES_DEFAULT +AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT])dnl +AC_BEFORE([$0], [LT_LANG])dnl +AC_BEFORE([$0], [LT_OUTPUT])dnl +AC_BEFORE([$0], [LTDL_INIT])dnl +m4_require([_LT_CHECK_BUILDDIR])dnl + +dnl Autoconf doesn't catch unexpanded LT_ macros by default: +m4_pattern_forbid([^_?LT_[A-Z_]+$])dnl +m4_pattern_allow([^(_LT_EOF|LT_DLGLOBAL|LT_DLLAZY_OR_NOW|LT_MULTI_MODULE)$])dnl +dnl aclocal doesn't pull ltoptions.m4, ltsugar.m4, or ltversion.m4 +dnl unless we require an AC_DEFUNed macro: +AC_REQUIRE([LTOPTIONS_VERSION])dnl +AC_REQUIRE([LTSUGAR_VERSION])dnl +AC_REQUIRE([LTVERSION_VERSION])dnl +AC_REQUIRE([LTOBSOLETE_VERSION])dnl +m4_require([_LT_PROG_LTMAIN])dnl + +_LT_SHELL_INIT([SHELL=${CONFIG_SHELL-/bin/sh}]) + +dnl Parse OPTIONS +_LT_SET_OPTIONS([$0], [$1]) + +# This can be used to rebuild libtool when needed +LIBTOOL_DEPS="$ltmain" + +# Always use our own libtool. +LIBTOOL='$(SHELL) $(top_builddir)/libtool' +AC_SUBST(LIBTOOL)dnl + +_LT_SETUP + +# Only expand once: +m4_define([LT_INIT]) +])# LT_INIT + +# Old names: +AU_ALIAS([AC_PROG_LIBTOOL], [LT_INIT]) +AU_ALIAS([AM_PROG_LIBTOOL], [LT_INIT]) +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AC_PROG_LIBTOOL], []) +dnl AC_DEFUN([AM_PROG_LIBTOOL], []) + + +# _LT_CC_BASENAME(CC) +# ------------------- +# Calculate cc_basename. Skip known compiler wrappers and cross-prefix. +m4_defun([_LT_CC_BASENAME], +[for cc_temp in $1""; do + case $cc_temp in + compile | *[[\\/]]compile | ccache | *[[\\/]]ccache ) ;; + distcc | *[[\\/]]distcc | purify | *[[\\/]]purify ) ;; + \-*) ;; + *) break;; + esac +done +cc_basename=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"` +]) + + +# _LT_FILEUTILS_DEFAULTS +# ---------------------- +# It is okay to use these file commands and assume they have been set +# sensibly after `m4_require([_LT_FILEUTILS_DEFAULTS])'. +m4_defun([_LT_FILEUTILS_DEFAULTS], +[: ${CP="cp -f"} +: ${MV="mv -f"} +: ${RM="rm -f"} +])# _LT_FILEUTILS_DEFAULTS + + +# _LT_SETUP +# --------- +m4_defun([_LT_SETUP], +[AC_REQUIRE([AC_CANONICAL_HOST])dnl +AC_REQUIRE([AC_CANONICAL_BUILD])dnl +AC_REQUIRE([_LT_PREPARE_SED_QUOTE_VARS])dnl +AC_REQUIRE([_LT_PROG_ECHO_BACKSLASH])dnl + +_LT_DECL([], [PATH_SEPARATOR], [1], [The PATH separator for the build system])dnl +dnl +_LT_DECL([], [host_alias], [0], [The host system])dnl +_LT_DECL([], [host], [0])dnl +_LT_DECL([], [host_os], [0])dnl +dnl +_LT_DECL([], [build_alias], [0], [The build system])dnl +_LT_DECL([], [build], [0])dnl +_LT_DECL([], [build_os], [0])dnl +dnl +AC_REQUIRE([AC_PROG_CC])dnl +AC_REQUIRE([LT_PATH_LD])dnl +AC_REQUIRE([LT_PATH_NM])dnl +dnl +AC_REQUIRE([AC_PROG_LN_S])dnl +test -z "$LN_S" && LN_S="ln -s" +_LT_DECL([], [LN_S], [1], [Whether we need soft or hard links])dnl +dnl +AC_REQUIRE([LT_CMD_MAX_LEN])dnl +_LT_DECL([objext], [ac_objext], [0], [Object file suffix (normally "o")])dnl +_LT_DECL([], [exeext], [0], [Executable file suffix (normally "")])dnl +dnl +m4_require([_LT_FILEUTILS_DEFAULTS])dnl +m4_require([_LT_CHECK_SHELL_FEATURES])dnl +m4_require([_LT_PATH_CONVERSION_FUNCTIONS])dnl +m4_require([_LT_CMD_RELOAD])dnl +m4_require([_LT_CHECK_MAGIC_METHOD])dnl +m4_require([_LT_CHECK_SHAREDLIB_FROM_LINKLIB])dnl +m4_require([_LT_CMD_OLD_ARCHIVE])dnl +m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl +m4_require([_LT_WITH_SYSROOT])dnl + +_LT_CONFIG_LIBTOOL_INIT([ +# See if we are running on zsh, and set the options which allow our +# commands through without removal of \ escapes INIT. +if test -n "\${ZSH_VERSION+set}" ; then + setopt NO_GLOB_SUBST +fi +]) +if test -n "${ZSH_VERSION+set}" ; then + setopt NO_GLOB_SUBST +fi + +_LT_CHECK_OBJDIR + +m4_require([_LT_TAG_COMPILER])dnl + +case $host_os in +aix3*) + # AIX sometimes has problems with the GCC collect2 program. For some + # reason, if we set the COLLECT_NAMES environment variable, the problems + # vanish in a puff of smoke. + if test "X${COLLECT_NAMES+set}" != Xset; then + COLLECT_NAMES= + export COLLECT_NAMES + fi + ;; +esac + +# Global variables: +ofile=libtool +can_build_shared=yes + +# All known linkers require a `.a' archive for static linking (except MSVC, +# which needs '.lib'). +libext=a + +with_gnu_ld="$lt_cv_prog_gnu_ld" + +old_CC="$CC" +old_CFLAGS="$CFLAGS" + +# Set sane defaults for various variables +test -z "$CC" && CC=cc +test -z "$LTCC" && LTCC=$CC +test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS +test -z "$LD" && LD=ld +test -z "$ac_objext" && ac_objext=o + +_LT_CC_BASENAME([$compiler]) + +# Only perform the check for file, if the check method requires it +test -z "$MAGIC_CMD" && MAGIC_CMD=file +case $deplibs_check_method in +file_magic*) + if test "$file_magic_cmd" = '$MAGIC_CMD'; then + _LT_PATH_MAGIC + fi + ;; +esac + +# Use C for the default configuration in the libtool script +LT_SUPPORTED_TAG([CC]) +_LT_LANG_C_CONFIG +_LT_LANG_DEFAULT_CONFIG +_LT_CONFIG_COMMANDS +])# _LT_SETUP + + +# _LT_PREPARE_SED_QUOTE_VARS +# -------------------------- +# Define a few sed substitution that help us do robust quoting. +m4_defun([_LT_PREPARE_SED_QUOTE_VARS], +[# Backslashify metacharacters that are still active within +# double-quoted strings. +sed_quote_subst='s/\([["`$\\]]\)/\\\1/g' + +# Same as above, but do not quote variable references. +double_quote_subst='s/\([["`\\]]\)/\\\1/g' + +# Sed substitution to delay expansion of an escaped shell variable in a +# double_quote_subst'ed string. +delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g' + +# Sed substitution to delay expansion of an escaped single quote. +delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g' + +# Sed substitution to avoid accidental globbing in evaled expressions +no_glob_subst='s/\*/\\\*/g' +]) + +# _LT_PROG_LTMAIN +# --------------- +# Note that this code is called both from `configure', and `config.status' +# now that we use AC_CONFIG_COMMANDS to generate libtool. Notably, +# `config.status' has no value for ac_aux_dir unless we are using Automake, +# so we pass a copy along to make sure it has a sensible value anyway. +m4_defun([_LT_PROG_LTMAIN], +[m4_ifdef([AC_REQUIRE_AUX_FILE], [AC_REQUIRE_AUX_FILE([ltmain.sh])])dnl +_LT_CONFIG_LIBTOOL_INIT([ac_aux_dir='$ac_aux_dir']) +ltmain="$ac_aux_dir/ltmain.sh" +])# _LT_PROG_LTMAIN + + +## ------------------------------------- ## +## Accumulate code for creating libtool. ## +## ------------------------------------- ## + +# So that we can recreate a full libtool script including additional +# tags, we accumulate the chunks of code to send to AC_CONFIG_COMMANDS +# in macros and then make a single call at the end using the `libtool' +# label. + + +# _LT_CONFIG_LIBTOOL_INIT([INIT-COMMANDS]) +# ---------------------------------------- +# Register INIT-COMMANDS to be passed to AC_CONFIG_COMMANDS later. +m4_define([_LT_CONFIG_LIBTOOL_INIT], +[m4_ifval([$1], + [m4_append([_LT_OUTPUT_LIBTOOL_INIT], + [$1 +])])]) + +# Initialize. +m4_define([_LT_OUTPUT_LIBTOOL_INIT]) + + +# _LT_CONFIG_LIBTOOL([COMMANDS]) +# ------------------------------ +# Register COMMANDS to be passed to AC_CONFIG_COMMANDS later. +m4_define([_LT_CONFIG_LIBTOOL], +[m4_ifval([$1], + [m4_append([_LT_OUTPUT_LIBTOOL_COMMANDS], + [$1 +])])]) + +# Initialize. +m4_define([_LT_OUTPUT_LIBTOOL_COMMANDS]) + + +# _LT_CONFIG_SAVE_COMMANDS([COMMANDS], [INIT_COMMANDS]) +# ----------------------------------------------------- +m4_defun([_LT_CONFIG_SAVE_COMMANDS], +[_LT_CONFIG_LIBTOOL([$1]) +_LT_CONFIG_LIBTOOL_INIT([$2]) +]) + + +# _LT_FORMAT_COMMENT([COMMENT]) +# ----------------------------- +# Add leading comment marks to the start of each line, and a trailing +# full-stop to the whole comment if one is not present already. +m4_define([_LT_FORMAT_COMMENT], +[m4_ifval([$1], [ +m4_bpatsubst([m4_bpatsubst([$1], [^ *], [# ])], + [['`$\]], [\\\&])]m4_bmatch([$1], [[!?.]$], [], [.]) +)]) + + + +## ------------------------ ## +## FIXME: Eliminate VARNAME ## +## ------------------------ ## + + +# _LT_DECL([CONFIGNAME], VARNAME, VALUE, [DESCRIPTION], [IS-TAGGED?]) +# ------------------------------------------------------------------- +# CONFIGNAME is the name given to the value in the libtool script. +# VARNAME is the (base) name used in the configure script. +# VALUE may be 0, 1 or 2 for a computed quote escaped value based on +# VARNAME. Any other value will be used directly. +m4_define([_LT_DECL], +[lt_if_append_uniq([lt_decl_varnames], [$2], [, ], + [lt_dict_add_subkey([lt_decl_dict], [$2], [libtool_name], + [m4_ifval([$1], [$1], [$2])]) + lt_dict_add_subkey([lt_decl_dict], [$2], [value], [$3]) + m4_ifval([$4], + [lt_dict_add_subkey([lt_decl_dict], [$2], [description], [$4])]) + lt_dict_add_subkey([lt_decl_dict], [$2], + [tagged?], [m4_ifval([$5], [yes], [no])])]) +]) + + +# _LT_TAGDECL([CONFIGNAME], VARNAME, VALUE, [DESCRIPTION]) +# -------------------------------------------------------- +m4_define([_LT_TAGDECL], [_LT_DECL([$1], [$2], [$3], [$4], [yes])]) + + +# lt_decl_tag_varnames([SEPARATOR], [VARNAME1...]) +# ------------------------------------------------ +m4_define([lt_decl_tag_varnames], +[_lt_decl_filter([tagged?], [yes], $@)]) + + +# _lt_decl_filter(SUBKEY, VALUE, [SEPARATOR], [VARNAME1..]) +# --------------------------------------------------------- +m4_define([_lt_decl_filter], +[m4_case([$#], + [0], [m4_fatal([$0: too few arguments: $#])], + [1], [m4_fatal([$0: too few arguments: $#: $1])], + [2], [lt_dict_filter([lt_decl_dict], [$1], [$2], [], lt_decl_varnames)], + [3], [lt_dict_filter([lt_decl_dict], [$1], [$2], [$3], lt_decl_varnames)], + [lt_dict_filter([lt_decl_dict], $@)])[]dnl +]) + + +# lt_decl_quote_varnames([SEPARATOR], [VARNAME1...]) +# -------------------------------------------------- +m4_define([lt_decl_quote_varnames], +[_lt_decl_filter([value], [1], $@)]) + + +# lt_decl_dquote_varnames([SEPARATOR], [VARNAME1...]) +# --------------------------------------------------- +m4_define([lt_decl_dquote_varnames], +[_lt_decl_filter([value], [2], $@)]) + + +# lt_decl_varnames_tagged([SEPARATOR], [VARNAME1...]) +# --------------------------------------------------- +m4_define([lt_decl_varnames_tagged], +[m4_assert([$# <= 2])dnl +_$0(m4_quote(m4_default([$1], [[, ]])), + m4_ifval([$2], [[$2]], [m4_dquote(lt_decl_tag_varnames)]), + m4_split(m4_normalize(m4_quote(_LT_TAGS)), [ ]))]) +m4_define([_lt_decl_varnames_tagged], +[m4_ifval([$3], [lt_combine([$1], [$2], [_], $3)])]) + + +# lt_decl_all_varnames([SEPARATOR], [VARNAME1...]) +# ------------------------------------------------ +m4_define([lt_decl_all_varnames], +[_$0(m4_quote(m4_default([$1], [[, ]])), + m4_if([$2], [], + m4_quote(lt_decl_varnames), + m4_quote(m4_shift($@))))[]dnl +]) +m4_define([_lt_decl_all_varnames], +[lt_join($@, lt_decl_varnames_tagged([$1], + lt_decl_tag_varnames([[, ]], m4_shift($@))))dnl +]) + + +# _LT_CONFIG_STATUS_DECLARE([VARNAME]) +# ------------------------------------ +# Quote a variable value, and forward it to `config.status' so that its +# declaration there will have the same value as in `configure'. VARNAME +# must have a single quote delimited value for this to work. +m4_define([_LT_CONFIG_STATUS_DECLARE], +[$1='`$ECHO "$][$1" | $SED "$delay_single_quote_subst"`']) + + +# _LT_CONFIG_STATUS_DECLARATIONS +# ------------------------------ +# We delimit libtool config variables with single quotes, so when +# we write them to config.status, we have to be sure to quote all +# embedded single quotes properly. In configure, this macro expands +# each variable declared with _LT_DECL (and _LT_TAGDECL) into: +# +# ='`$ECHO "$" | $SED "$delay_single_quote_subst"`' +m4_defun([_LT_CONFIG_STATUS_DECLARATIONS], +[m4_foreach([_lt_var], m4_quote(lt_decl_all_varnames), + [m4_n([_LT_CONFIG_STATUS_DECLARE(_lt_var)])])]) + + +# _LT_LIBTOOL_TAGS +# ---------------- +# Output comment and list of tags supported by the script +m4_defun([_LT_LIBTOOL_TAGS], +[_LT_FORMAT_COMMENT([The names of the tagged configurations supported by this script])dnl +available_tags="_LT_TAGS"dnl +]) + + +# _LT_LIBTOOL_DECLARE(VARNAME, [TAG]) +# ----------------------------------- +# Extract the dictionary values for VARNAME (optionally with TAG) and +# expand to a commented shell variable setting: +# +# # Some comment about what VAR is for. +# visible_name=$lt_internal_name +m4_define([_LT_LIBTOOL_DECLARE], +[_LT_FORMAT_COMMENT(m4_quote(lt_dict_fetch([lt_decl_dict], [$1], + [description])))[]dnl +m4_pushdef([_libtool_name], + m4_quote(lt_dict_fetch([lt_decl_dict], [$1], [libtool_name])))[]dnl +m4_case(m4_quote(lt_dict_fetch([lt_decl_dict], [$1], [value])), + [0], [_libtool_name=[$]$1], + [1], [_libtool_name=$lt_[]$1], + [2], [_libtool_name=$lt_[]$1], + [_libtool_name=lt_dict_fetch([lt_decl_dict], [$1], [value])])[]dnl +m4_ifval([$2], [_$2])[]m4_popdef([_libtool_name])[]dnl +]) + + +# _LT_LIBTOOL_CONFIG_VARS +# ----------------------- +# Produce commented declarations of non-tagged libtool config variables +# suitable for insertion in the LIBTOOL CONFIG section of the `libtool' +# script. Tagged libtool config variables (even for the LIBTOOL CONFIG +# section) are produced by _LT_LIBTOOL_TAG_VARS. +m4_defun([_LT_LIBTOOL_CONFIG_VARS], +[m4_foreach([_lt_var], + m4_quote(_lt_decl_filter([tagged?], [no], [], lt_decl_varnames)), + [m4_n([_LT_LIBTOOL_DECLARE(_lt_var)])])]) + + +# _LT_LIBTOOL_TAG_VARS(TAG) +# ------------------------- +m4_define([_LT_LIBTOOL_TAG_VARS], +[m4_foreach([_lt_var], m4_quote(lt_decl_tag_varnames), + [m4_n([_LT_LIBTOOL_DECLARE(_lt_var, [$1])])])]) + + +# _LT_TAGVAR(VARNAME, [TAGNAME]) +# ------------------------------ +m4_define([_LT_TAGVAR], [m4_ifval([$2], [$1_$2], [$1])]) + + +# _LT_CONFIG_COMMANDS +# ------------------- +# Send accumulated output to $CONFIG_STATUS. Thanks to the lists of +# variables for single and double quote escaping we saved from calls +# to _LT_DECL, we can put quote escaped variables declarations +# into `config.status', and then the shell code to quote escape them in +# for loops in `config.status'. Finally, any additional code accumulated +# from calls to _LT_CONFIG_LIBTOOL_INIT is expanded. +m4_defun([_LT_CONFIG_COMMANDS], +[AC_PROVIDE_IFELSE([LT_OUTPUT], + dnl If the libtool generation code has been placed in $CONFIG_LT, + dnl instead of duplicating it all over again into config.status, + dnl then we will have config.status run $CONFIG_LT later, so it + dnl needs to know what name is stored there: + [AC_CONFIG_COMMANDS([libtool], + [$SHELL $CONFIG_LT || AS_EXIT(1)], [CONFIG_LT='$CONFIG_LT'])], + dnl If the libtool generation code is destined for config.status, + dnl expand the accumulated commands and init code now: + [AC_CONFIG_COMMANDS([libtool], + [_LT_OUTPUT_LIBTOOL_COMMANDS], [_LT_OUTPUT_LIBTOOL_COMMANDS_INIT])]) +])#_LT_CONFIG_COMMANDS + + +# Initialize. +m4_define([_LT_OUTPUT_LIBTOOL_COMMANDS_INIT], +[ + +# The HP-UX ksh and POSIX shell print the target directory to stdout +# if CDPATH is set. +(unset CDPATH) >/dev/null 2>&1 && unset CDPATH + +sed_quote_subst='$sed_quote_subst' +double_quote_subst='$double_quote_subst' +delay_variable_subst='$delay_variable_subst' +_LT_CONFIG_STATUS_DECLARATIONS +LTCC='$LTCC' +LTCFLAGS='$LTCFLAGS' +compiler='$compiler_DEFAULT' + +# A function that is used when there is no print builtin or printf. +func_fallback_echo () +{ + eval 'cat <<_LTECHO_EOF +\$[]1 +_LTECHO_EOF' +} + +# Quote evaled strings. +for var in lt_decl_all_varnames([[ \ +]], lt_decl_quote_varnames); do + case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in + *[[\\\\\\\`\\"\\\$]]*) + eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED \\"\\\$sed_quote_subst\\"\\\`\\\\\\"" + ;; + *) + eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\"" + ;; + esac +done + +# Double-quote double-evaled strings. +for var in lt_decl_all_varnames([[ \ +]], lt_decl_dquote_varnames); do + case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in + *[[\\\\\\\`\\"\\\$]]*) + eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\"" + ;; + *) + eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\"" + ;; + esac +done + +_LT_OUTPUT_LIBTOOL_INIT +]) + +# _LT_GENERATED_FILE_INIT(FILE, [COMMENT]) +# ------------------------------------ +# Generate a child script FILE with all initialization necessary to +# reuse the environment learned by the parent script, and make the +# file executable. If COMMENT is supplied, it is inserted after the +# `#!' sequence but before initialization text begins. After this +# macro, additional text can be appended to FILE to form the body of +# the child script. The macro ends with non-zero status if the +# file could not be fully written (such as if the disk is full). +m4_ifdef([AS_INIT_GENERATED], +[m4_defun([_LT_GENERATED_FILE_INIT],[AS_INIT_GENERATED($@)])], +[m4_defun([_LT_GENERATED_FILE_INIT], +[m4_require([AS_PREPARE])]dnl +[m4_pushdef([AS_MESSAGE_LOG_FD])]dnl +[lt_write_fail=0 +cat >$1 <<_ASEOF || lt_write_fail=1 +#! $SHELL +# Generated by $as_me. +$2 +SHELL=\${CONFIG_SHELL-$SHELL} +export SHELL +_ASEOF +cat >>$1 <<\_ASEOF || lt_write_fail=1 +AS_SHELL_SANITIZE +_AS_PREPARE +exec AS_MESSAGE_FD>&1 +_ASEOF +test $lt_write_fail = 0 && chmod +x $1[]dnl +m4_popdef([AS_MESSAGE_LOG_FD])])])# _LT_GENERATED_FILE_INIT + +# LT_OUTPUT +# --------- +# This macro allows early generation of the libtool script (before +# AC_OUTPUT is called), incase it is used in configure for compilation +# tests. +AC_DEFUN([LT_OUTPUT], +[: ${CONFIG_LT=./config.lt} +AC_MSG_NOTICE([creating $CONFIG_LT]) +_LT_GENERATED_FILE_INIT(["$CONFIG_LT"], +[# Run this file to recreate a libtool stub with the current configuration.]) + +cat >>"$CONFIG_LT" <<\_LTEOF +lt_cl_silent=false +exec AS_MESSAGE_LOG_FD>>config.log +{ + echo + AS_BOX([Running $as_me.]) +} >&AS_MESSAGE_LOG_FD + +lt_cl_help="\ +\`$as_me' creates a local libtool stub from the current configuration, +for use in further configure time tests before the real libtool is +generated. + +Usage: $[0] [[OPTIONS]] + + -h, --help print this help, then exit + -V, --version print version number, then exit + -q, --quiet do not print progress messages + -d, --debug don't remove temporary files + +Report bugs to ." + +lt_cl_version="\ +m4_ifset([AC_PACKAGE_NAME], [AC_PACKAGE_NAME ])config.lt[]dnl +m4_ifset([AC_PACKAGE_VERSION], [ AC_PACKAGE_VERSION]) +configured by $[0], generated by m4_PACKAGE_STRING. + +Copyright (C) 2011 Free Software Foundation, Inc. +This config.lt script is free software; the Free Software Foundation +gives unlimited permision to copy, distribute and modify it." + +while test $[#] != 0 +do + case $[1] in + --version | --v* | -V ) + echo "$lt_cl_version"; exit 0 ;; + --help | --h* | -h ) + echo "$lt_cl_help"; exit 0 ;; + --debug | --d* | -d ) + debug=: ;; + --quiet | --q* | --silent | --s* | -q ) + lt_cl_silent=: ;; + + -*) AC_MSG_ERROR([unrecognized option: $[1] +Try \`$[0] --help' for more information.]) ;; + + *) AC_MSG_ERROR([unrecognized argument: $[1] +Try \`$[0] --help' for more information.]) ;; + esac + shift +done + +if $lt_cl_silent; then + exec AS_MESSAGE_FD>/dev/null +fi +_LTEOF + +cat >>"$CONFIG_LT" <<_LTEOF +_LT_OUTPUT_LIBTOOL_COMMANDS_INIT +_LTEOF + +cat >>"$CONFIG_LT" <<\_LTEOF +AC_MSG_NOTICE([creating $ofile]) +_LT_OUTPUT_LIBTOOL_COMMANDS +AS_EXIT(0) +_LTEOF +chmod +x "$CONFIG_LT" + +# configure is writing to config.log, but config.lt does its own redirection, +# appending to config.log, which fails on DOS, as config.log is still kept +# open by configure. Here we exec the FD to /dev/null, effectively closing +# config.log, so it can be properly (re)opened and appended to by config.lt. +lt_cl_success=: +test "$silent" = yes && + lt_config_lt_args="$lt_config_lt_args --quiet" +exec AS_MESSAGE_LOG_FD>/dev/null +$SHELL "$CONFIG_LT" $lt_config_lt_args || lt_cl_success=false +exec AS_MESSAGE_LOG_FD>>config.log +$lt_cl_success || AS_EXIT(1) +])# LT_OUTPUT + + +# _LT_CONFIG(TAG) +# --------------- +# If TAG is the built-in tag, create an initial libtool script with a +# default configuration from the untagged config vars. Otherwise add code +# to config.status for appending the configuration named by TAG from the +# matching tagged config vars. +m4_defun([_LT_CONFIG], +[m4_require([_LT_FILEUTILS_DEFAULTS])dnl +_LT_CONFIG_SAVE_COMMANDS([ + m4_define([_LT_TAG], m4_if([$1], [], [C], [$1]))dnl + m4_if(_LT_TAG, [C], [ + # See if we are running on zsh, and set the options which allow our + # commands through without removal of \ escapes. + if test -n "${ZSH_VERSION+set}" ; then + setopt NO_GLOB_SUBST + fi + + cfgfile="${ofile}T" + trap "$RM \"$cfgfile\"; exit 1" 1 2 15 + $RM "$cfgfile" + + cat <<_LT_EOF >> "$cfgfile" +#! $SHELL + +# `$ECHO "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services. +# Generated automatically by $as_me ($PACKAGE$TIMESTAMP) $VERSION +# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: +# NOTE: Changes made to this file will be lost: look at ltmain.sh. +# +_LT_COPYING +_LT_LIBTOOL_TAGS + +# ### BEGIN LIBTOOL CONFIG +_LT_LIBTOOL_CONFIG_VARS +_LT_LIBTOOL_TAG_VARS +# ### END LIBTOOL CONFIG + +_LT_EOF + + case $host_os in + aix3*) + cat <<\_LT_EOF >> "$cfgfile" +# AIX sometimes has problems with the GCC collect2 program. For some +# reason, if we set the COLLECT_NAMES environment variable, the problems +# vanish in a puff of smoke. +if test "X${COLLECT_NAMES+set}" != Xset; then + COLLECT_NAMES= + export COLLECT_NAMES +fi +_LT_EOF + ;; + esac + + _LT_PROG_LTMAIN + + # We use sed instead of cat because bash on DJGPP gets confused if + # if finds mixed CR/LF and LF-only lines. Since sed operates in + # text mode, it properly converts lines to CR/LF. This bash problem + # is reportedly fixed, but why not run on old versions too? + sed '$q' "$ltmain" >> "$cfgfile" \ + || (rm -f "$cfgfile"; exit 1) + + _LT_PROG_REPLACE_SHELLFNS + + mv -f "$cfgfile" "$ofile" || + (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile") + chmod +x "$ofile" +], +[cat <<_LT_EOF >> "$ofile" + +dnl Unfortunately we have to use $1 here, since _LT_TAG is not expanded +dnl in a comment (ie after a #). +# ### BEGIN LIBTOOL TAG CONFIG: $1 +_LT_LIBTOOL_TAG_VARS(_LT_TAG) +# ### END LIBTOOL TAG CONFIG: $1 +_LT_EOF +])dnl /m4_if +], +[m4_if([$1], [], [ + PACKAGE='$PACKAGE' + VERSION='$VERSION' + TIMESTAMP='$TIMESTAMP' + RM='$RM' + ofile='$ofile'], []) +])dnl /_LT_CONFIG_SAVE_COMMANDS +])# _LT_CONFIG + + +# LT_SUPPORTED_TAG(TAG) +# --------------------- +# Trace this macro to discover what tags are supported by the libtool +# --tag option, using: +# autoconf --trace 'LT_SUPPORTED_TAG:$1' +AC_DEFUN([LT_SUPPORTED_TAG], []) + + +# C support is built-in for now +m4_define([_LT_LANG_C_enabled], []) +m4_define([_LT_TAGS], []) + + +# LT_LANG(LANG) +# ------------- +# Enable libtool support for the given language if not already enabled. +AC_DEFUN([LT_LANG], +[AC_BEFORE([$0], [LT_OUTPUT])dnl +m4_case([$1], + [C], [_LT_LANG(C)], + [C++], [_LT_LANG(CXX)], + [Go], [_LT_LANG(GO)], + [Java], [_LT_LANG(GCJ)], + [Fortran 77], [_LT_LANG(F77)], + [Fortran], [_LT_LANG(FC)], + [Windows Resource], [_LT_LANG(RC)], + [m4_ifdef([_LT_LANG_]$1[_CONFIG], + [_LT_LANG($1)], + [m4_fatal([$0: unsupported language: "$1"])])])dnl +])# LT_LANG + + +# _LT_LANG(LANGNAME) +# ------------------ +m4_defun([_LT_LANG], +[m4_ifdef([_LT_LANG_]$1[_enabled], [], + [LT_SUPPORTED_TAG([$1])dnl + m4_append([_LT_TAGS], [$1 ])dnl + m4_define([_LT_LANG_]$1[_enabled], [])dnl + _LT_LANG_$1_CONFIG($1)])dnl +])# _LT_LANG + + +m4_ifndef([AC_PROG_GO], [ +############################################################ +# NOTE: This macro has been submitted for inclusion into # +# GNU Autoconf as AC_PROG_GO. When it is available in # +# a released version of Autoconf we should remove this # +# macro and use it instead. # +############################################################ +m4_defun([AC_PROG_GO], +[AC_LANG_PUSH(Go)dnl +AC_ARG_VAR([GOC], [Go compiler command])dnl +AC_ARG_VAR([GOFLAGS], [Go compiler flags])dnl +_AC_ARG_VAR_LDFLAGS()dnl +AC_CHECK_TOOL(GOC, gccgo) +if test -z "$GOC"; then + if test -n "$ac_tool_prefix"; then + AC_CHECK_PROG(GOC, [${ac_tool_prefix}gccgo], [${ac_tool_prefix}gccgo]) + fi +fi +if test -z "$GOC"; then + AC_CHECK_PROG(GOC, gccgo, gccgo, false) +fi +])#m4_defun +])#m4_ifndef + + +# _LT_LANG_DEFAULT_CONFIG +# ----------------------- +m4_defun([_LT_LANG_DEFAULT_CONFIG], +[AC_PROVIDE_IFELSE([AC_PROG_CXX], + [LT_LANG(CXX)], + [m4_define([AC_PROG_CXX], defn([AC_PROG_CXX])[LT_LANG(CXX)])]) + +AC_PROVIDE_IFELSE([AC_PROG_F77], + [LT_LANG(F77)], + [m4_define([AC_PROG_F77], defn([AC_PROG_F77])[LT_LANG(F77)])]) + +AC_PROVIDE_IFELSE([AC_PROG_FC], + [LT_LANG(FC)], + [m4_define([AC_PROG_FC], defn([AC_PROG_FC])[LT_LANG(FC)])]) + +dnl The call to [A][M_PROG_GCJ] is quoted like that to stop aclocal +dnl pulling things in needlessly. +AC_PROVIDE_IFELSE([AC_PROG_GCJ], + [LT_LANG(GCJ)], + [AC_PROVIDE_IFELSE([A][M_PROG_GCJ], + [LT_LANG(GCJ)], + [AC_PROVIDE_IFELSE([LT_PROG_GCJ], + [LT_LANG(GCJ)], + [m4_ifdef([AC_PROG_GCJ], + [m4_define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[LT_LANG(GCJ)])]) + m4_ifdef([A][M_PROG_GCJ], + [m4_define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[LT_LANG(GCJ)])]) + m4_ifdef([LT_PROG_GCJ], + [m4_define([LT_PROG_GCJ], defn([LT_PROG_GCJ])[LT_LANG(GCJ)])])])])]) + +AC_PROVIDE_IFELSE([AC_PROG_GO], + [LT_LANG(GO)], + [m4_define([AC_PROG_GO], defn([AC_PROG_GO])[LT_LANG(GO)])]) + +AC_PROVIDE_IFELSE([LT_PROG_RC], + [LT_LANG(RC)], + [m4_define([LT_PROG_RC], defn([LT_PROG_RC])[LT_LANG(RC)])]) +])# _LT_LANG_DEFAULT_CONFIG + +# Obsolete macros: +AU_DEFUN([AC_LIBTOOL_CXX], [LT_LANG(C++)]) +AU_DEFUN([AC_LIBTOOL_F77], [LT_LANG(Fortran 77)]) +AU_DEFUN([AC_LIBTOOL_FC], [LT_LANG(Fortran)]) +AU_DEFUN([AC_LIBTOOL_GCJ], [LT_LANG(Java)]) +AU_DEFUN([AC_LIBTOOL_RC], [LT_LANG(Windows Resource)]) +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AC_LIBTOOL_CXX], []) +dnl AC_DEFUN([AC_LIBTOOL_F77], []) +dnl AC_DEFUN([AC_LIBTOOL_FC], []) +dnl AC_DEFUN([AC_LIBTOOL_GCJ], []) +dnl AC_DEFUN([AC_LIBTOOL_RC], []) + + +# _LT_TAG_COMPILER +# ---------------- +m4_defun([_LT_TAG_COMPILER], +[AC_REQUIRE([AC_PROG_CC])dnl + +_LT_DECL([LTCC], [CC], [1], [A C compiler])dnl +_LT_DECL([LTCFLAGS], [CFLAGS], [1], [LTCC compiler flags])dnl +_LT_TAGDECL([CC], [compiler], [1], [A language specific compiler])dnl +_LT_TAGDECL([with_gcc], [GCC], [0], [Is the compiler the GNU compiler?])dnl + +# If no C compiler was specified, use CC. +LTCC=${LTCC-"$CC"} + +# If no C compiler flags were specified, use CFLAGS. +LTCFLAGS=${LTCFLAGS-"$CFLAGS"} + +# Allow CC to be a program name with arguments. +compiler=$CC +])# _LT_TAG_COMPILER + + +# _LT_COMPILER_BOILERPLATE +# ------------------------ +# Check for compiler boilerplate output or warnings with +# the simple compiler test code. +m4_defun([_LT_COMPILER_BOILERPLATE], +[m4_require([_LT_DECL_SED])dnl +ac_outfile=conftest.$ac_objext +echo "$lt_simple_compile_test_code" >conftest.$ac_ext +eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err +_lt_compiler_boilerplate=`cat conftest.err` +$RM conftest* +])# _LT_COMPILER_BOILERPLATE + + +# _LT_LINKER_BOILERPLATE +# ---------------------- +# Check for linker boilerplate output or warnings with +# the simple link test code. +m4_defun([_LT_LINKER_BOILERPLATE], +[m4_require([_LT_DECL_SED])dnl +ac_outfile=conftest.$ac_objext +echo "$lt_simple_link_test_code" >conftest.$ac_ext +eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err +_lt_linker_boilerplate=`cat conftest.err` +$RM -r conftest* +])# _LT_LINKER_BOILERPLATE + +# _LT_REQUIRED_DARWIN_CHECKS +# ------------------------- +m4_defun_once([_LT_REQUIRED_DARWIN_CHECKS],[ + case $host_os in + rhapsody* | darwin*) + AC_CHECK_TOOL([DSYMUTIL], [dsymutil], [:]) + AC_CHECK_TOOL([NMEDIT], [nmedit], [:]) + AC_CHECK_TOOL([LIPO], [lipo], [:]) + AC_CHECK_TOOL([OTOOL], [otool], [:]) + AC_CHECK_TOOL([OTOOL64], [otool64], [:]) + _LT_DECL([], [DSYMUTIL], [1], + [Tool to manipulate archived DWARF debug symbol files on Mac OS X]) + _LT_DECL([], [NMEDIT], [1], + [Tool to change global to local symbols on Mac OS X]) + _LT_DECL([], [LIPO], [1], + [Tool to manipulate fat objects and archives on Mac OS X]) + _LT_DECL([], [OTOOL], [1], + [ldd/readelf like tool for Mach-O binaries on Mac OS X]) + _LT_DECL([], [OTOOL64], [1], + [ldd/readelf like tool for 64 bit Mach-O binaries on Mac OS X 10.4]) + + AC_CACHE_CHECK([for -single_module linker flag],[lt_cv_apple_cc_single_mod], + [lt_cv_apple_cc_single_mod=no + if test -z "${LT_MULTI_MODULE}"; then + # By default we will add the -single_module flag. You can override + # by either setting the environment variable LT_MULTI_MODULE + # non-empty at configure time, or by adding -multi_module to the + # link flags. + rm -rf libconftest.dylib* + echo "int foo(void){return 1;}" > conftest.c + echo "$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \ +-dynamiclib -Wl,-single_module conftest.c" >&AS_MESSAGE_LOG_FD + $LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \ + -dynamiclib -Wl,-single_module conftest.c 2>conftest.err + _lt_result=$? + # If there is a non-empty error log, and "single_module" + # appears in it, assume the flag caused a linker warning + if test -s conftest.err && $GREP single_module conftest.err; then + cat conftest.err >&AS_MESSAGE_LOG_FD + # Otherwise, if the output was created with a 0 exit code from + # the compiler, it worked. + elif test -f libconftest.dylib && test $_lt_result -eq 0; then + lt_cv_apple_cc_single_mod=yes + else + cat conftest.err >&AS_MESSAGE_LOG_FD + fi + rm -rf libconftest.dylib* + rm -f conftest.* + fi]) + + AC_CACHE_CHECK([for -exported_symbols_list linker flag], + [lt_cv_ld_exported_symbols_list], + [lt_cv_ld_exported_symbols_list=no + save_LDFLAGS=$LDFLAGS + echo "_main" > conftest.sym + LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym" + AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])], + [lt_cv_ld_exported_symbols_list=yes], + [lt_cv_ld_exported_symbols_list=no]) + LDFLAGS="$save_LDFLAGS" + ]) + + AC_CACHE_CHECK([for -force_load linker flag],[lt_cv_ld_force_load], + [lt_cv_ld_force_load=no + cat > conftest.c << _LT_EOF +int forced_loaded() { return 2;} +_LT_EOF + echo "$LTCC $LTCFLAGS -c -o conftest.o conftest.c" >&AS_MESSAGE_LOG_FD + $LTCC $LTCFLAGS -c -o conftest.o conftest.c 2>&AS_MESSAGE_LOG_FD + echo "$AR cru libconftest.a conftest.o" >&AS_MESSAGE_LOG_FD + $AR cru libconftest.a conftest.o 2>&AS_MESSAGE_LOG_FD + echo "$RANLIB libconftest.a" >&AS_MESSAGE_LOG_FD + $RANLIB libconftest.a 2>&AS_MESSAGE_LOG_FD + cat > conftest.c << _LT_EOF +int main() { return 0;} +_LT_EOF + echo "$LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a" >&AS_MESSAGE_LOG_FD + $LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a 2>conftest.err + _lt_result=$? + if test -s conftest.err && $GREP force_load conftest.err; then + cat conftest.err >&AS_MESSAGE_LOG_FD + elif test -f conftest && test $_lt_result -eq 0 && $GREP forced_load conftest >/dev/null 2>&1 ; then + lt_cv_ld_force_load=yes + else + cat conftest.err >&AS_MESSAGE_LOG_FD + fi + rm -f conftest.err libconftest.a conftest conftest.c + rm -rf conftest.dSYM + ]) + case $host_os in + rhapsody* | darwin1.[[012]]) + _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;; + darwin1.*) + _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; + darwin*) # darwin 5.x on + # if running on 10.5 or later, the deployment target defaults + # to the OS version, if on x86, and 10.4, the deployment + # target defaults to 10.4. Don't you love it? + case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in + 10.0,*86*-darwin8*|10.0,*-darwin[[91]]*) + _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;; + 10.[[012]]*) + _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; + 10.*) + _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;; + esac + ;; + esac + if test "$lt_cv_apple_cc_single_mod" = "yes"; then + _lt_dar_single_mod='$single_module' + fi + if test "$lt_cv_ld_exported_symbols_list" = "yes"; then + _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym' + else + _lt_dar_export_syms='~$NMEDIT -s $output_objdir/${libname}-symbols.expsym ${lib}' + fi + if test "$DSYMUTIL" != ":" && test "$lt_cv_ld_force_load" = "no"; then + _lt_dsymutil='~$DSYMUTIL $lib || :' + else + _lt_dsymutil= + fi + ;; + esac +]) + + +# _LT_DARWIN_LINKER_FEATURES([TAG]) +# --------------------------------- +# Checks for linker and compiler features on darwin +m4_defun([_LT_DARWIN_LINKER_FEATURES], +[ + m4_require([_LT_REQUIRED_DARWIN_CHECKS]) + _LT_TAGVAR(archive_cmds_need_lc, $1)=no + _LT_TAGVAR(hardcode_direct, $1)=no + _LT_TAGVAR(hardcode_automatic, $1)=yes + _LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported + if test "$lt_cv_ld_force_load" = "yes"; then + _LT_TAGVAR(whole_archive_flag_spec, $1)='`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience ${wl}-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`' + m4_case([$1], [F77], [_LT_TAGVAR(compiler_needs_object, $1)=yes], + [FC], [_LT_TAGVAR(compiler_needs_object, $1)=yes]) + else + _LT_TAGVAR(whole_archive_flag_spec, $1)='' + fi + _LT_TAGVAR(link_all_deplibs, $1)=yes + _LT_TAGVAR(allow_undefined_flag, $1)="$_lt_dar_allow_undefined" + case $cc_basename in + ifort*) _lt_dar_can_shared=yes ;; + *) _lt_dar_can_shared=$GCC ;; + esac + if test "$_lt_dar_can_shared" = "yes"; then + output_verbose_link_cmd=func_echo_all + _LT_TAGVAR(archive_cmds, $1)="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}" + _LT_TAGVAR(module_cmds, $1)="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}" + _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}" + _LT_TAGVAR(module_expsym_cmds, $1)="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}" + m4_if([$1], [CXX], +[ if test "$lt_cv_apple_cc_single_mod" != "yes"; then + _LT_TAGVAR(archive_cmds, $1)="\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dsymutil}" + _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dar_export_syms}${_lt_dsymutil}" + fi +],[]) + else + _LT_TAGVAR(ld_shlibs, $1)=no + fi +]) + +# _LT_SYS_MODULE_PATH_AIX([TAGNAME]) +# ---------------------------------- +# Links a minimal program and checks the executable +# for the system default hardcoded library path. In most cases, +# this is /usr/lib:/lib, but when the MPI compilers are used +# the location of the communication and MPI libs are included too. +# If we don't find anything, use the default library path according +# to the aix ld manual. +# Store the results from the different compilers for each TAGNAME. +# Allow to override them for all tags through lt_cv_aix_libpath. +m4_defun([_LT_SYS_MODULE_PATH_AIX], +[m4_require([_LT_DECL_SED])dnl +if test "${lt_cv_aix_libpath+set}" = set; then + aix_libpath=$lt_cv_aix_libpath +else + AC_CACHE_VAL([_LT_TAGVAR([lt_cv_aix_libpath_], [$1])], + [AC_LINK_IFELSE([AC_LANG_PROGRAM],[ + lt_aix_libpath_sed='[ + /Import File Strings/,/^$/ { + /^0/ { + s/^0 *\([^ ]*\) *$/\1/ + p + } + }]' + _LT_TAGVAR([lt_cv_aix_libpath_], [$1])=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` + # Check for a 64-bit object if we didn't find anything. + if test -z "$_LT_TAGVAR([lt_cv_aix_libpath_], [$1])"; then + _LT_TAGVAR([lt_cv_aix_libpath_], [$1])=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` + fi],[]) + if test -z "$_LT_TAGVAR([lt_cv_aix_libpath_], [$1])"; then + _LT_TAGVAR([lt_cv_aix_libpath_], [$1])="/usr/lib:/lib" + fi + ]) + aix_libpath=$_LT_TAGVAR([lt_cv_aix_libpath_], [$1]) +fi +])# _LT_SYS_MODULE_PATH_AIX + + +# _LT_SHELL_INIT(ARG) +# ------------------- +m4_define([_LT_SHELL_INIT], +[m4_divert_text([M4SH-INIT], [$1 +])])# _LT_SHELL_INIT + + + +# _LT_PROG_ECHO_BACKSLASH +# ----------------------- +# Find how we can fake an echo command that does not interpret backslash. +# In particular, with Autoconf 2.60 or later we add some code to the start +# of the generated configure script which will find a shell with a builtin +# printf (which we can use as an echo command). +m4_defun([_LT_PROG_ECHO_BACKSLASH], +[ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' +ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO +ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO + +AC_MSG_CHECKING([how to print strings]) +# Test print first, because it will be a builtin if present. +if test "X`( print -r -- -n ) 2>/dev/null`" = X-n && \ + test "X`print -r -- $ECHO 2>/dev/null`" = "X$ECHO"; then + ECHO='print -r --' +elif test "X`printf %s $ECHO 2>/dev/null`" = "X$ECHO"; then + ECHO='printf %s\n' +else + # Use this function as a fallback that always works. + func_fallback_echo () + { + eval 'cat <<_LTECHO_EOF +$[]1 +_LTECHO_EOF' + } + ECHO='func_fallback_echo' +fi + +# func_echo_all arg... +# Invoke $ECHO with all args, space-separated. +func_echo_all () +{ + $ECHO "$*" +} + +case "$ECHO" in + printf*) AC_MSG_RESULT([printf]) ;; + print*) AC_MSG_RESULT([print -r]) ;; + *) AC_MSG_RESULT([cat]) ;; +esac + +m4_ifdef([_AS_DETECT_SUGGESTED], +[_AS_DETECT_SUGGESTED([ + test -n "${ZSH_VERSION+set}${BASH_VERSION+set}" || ( + ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' + ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO + ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO + PATH=/empty FPATH=/empty; export PATH FPATH + test "X`printf %s $ECHO`" = "X$ECHO" \ + || test "X`print -r -- $ECHO`" = "X$ECHO" )])]) + +_LT_DECL([], [SHELL], [1], [Shell to use when invoking shell scripts]) +_LT_DECL([], [ECHO], [1], [An echo program that protects backslashes]) +])# _LT_PROG_ECHO_BACKSLASH + + +# _LT_WITH_SYSROOT +# ---------------- +AC_DEFUN([_LT_WITH_SYSROOT], +[AC_MSG_CHECKING([for sysroot]) +AC_ARG_WITH([sysroot], +[ --with-sysroot[=DIR] Search for dependent libraries within DIR + (or the compiler's sysroot if not specified).], +[], [with_sysroot=no]) + +dnl lt_sysroot will always be passed unquoted. We quote it here +dnl in case the user passed a directory name. +lt_sysroot= +case ${with_sysroot} in #( + yes) + if test "$GCC" = yes; then + lt_sysroot=`$CC --print-sysroot 2>/dev/null` + fi + ;; #( + /*) + lt_sysroot=`echo "$with_sysroot" | sed -e "$sed_quote_subst"` + ;; #( + no|'') + ;; #( + *) + AC_MSG_RESULT([${with_sysroot}]) + AC_MSG_ERROR([The sysroot must be an absolute path.]) + ;; +esac + + AC_MSG_RESULT([${lt_sysroot:-no}]) +_LT_DECL([], [lt_sysroot], [0], [The root where to search for ]dnl +[dependent libraries, and in which our libraries should be installed.])]) + +# _LT_ENABLE_LOCK +# --------------- +m4_defun([_LT_ENABLE_LOCK], +[AC_ARG_ENABLE([libtool-lock], + [AS_HELP_STRING([--disable-libtool-lock], + [avoid locking (might break parallel builds)])]) +test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes + +# Some flags need to be propagated to the compiler or linker for good +# libtool support. +case $host in +ia64-*-hpux*) + # Find out which ABI we are using. + echo 'int i;' > conftest.$ac_ext + if AC_TRY_EVAL(ac_compile); then + case `/usr/bin/file conftest.$ac_objext` in + *ELF-32*) + HPUX_IA64_MODE="32" + ;; + *ELF-64*) + HPUX_IA64_MODE="64" + ;; + esac + fi + rm -rf conftest* + ;; +*-*-irix6*) + # Find out which ABI we are using. + echo '[#]line '$LINENO' "configure"' > conftest.$ac_ext + if AC_TRY_EVAL(ac_compile); then + if test "$lt_cv_prog_gnu_ld" = yes; then + case `/usr/bin/file conftest.$ac_objext` in + *32-bit*) + LD="${LD-ld} -melf32bsmip" + ;; + *N32*) + LD="${LD-ld} -melf32bmipn32" + ;; + *64-bit*) + LD="${LD-ld} -melf64bmip" + ;; + esac + else + case `/usr/bin/file conftest.$ac_objext` in + *32-bit*) + LD="${LD-ld} -32" + ;; + *N32*) + LD="${LD-ld} -n32" + ;; + *64-bit*) + LD="${LD-ld} -64" + ;; + esac + fi + fi + rm -rf conftest* + ;; + +x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \ +s390*-*linux*|s390*-*tpf*|sparc*-*linux*) + # Find out which ABI we are using. + echo 'int i;' > conftest.$ac_ext + if AC_TRY_EVAL(ac_compile); then + case `/usr/bin/file conftest.o` in + *32-bit*) + case $host in + x86_64-*kfreebsd*-gnu) + LD="${LD-ld} -m elf_i386_fbsd" + ;; + x86_64-*linux*) + LD="${LD-ld} -m elf_i386" + ;; + ppc64-*linux*|powerpc64-*linux*) + LD="${LD-ld} -m elf32ppclinux" + ;; + s390x-*linux*) + LD="${LD-ld} -m elf_s390" + ;; + sparc64-*linux*) + LD="${LD-ld} -m elf32_sparc" + ;; + esac + ;; + *64-bit*) + case $host in + x86_64-*kfreebsd*-gnu) + LD="${LD-ld} -m elf_x86_64_fbsd" + ;; + x86_64-*linux*) + LD="${LD-ld} -m elf_x86_64" + ;; + ppc*-*linux*|powerpc*-*linux*) + LD="${LD-ld} -m elf64ppc" + ;; + s390*-*linux*|s390*-*tpf*) + LD="${LD-ld} -m elf64_s390" + ;; + sparc*-*linux*) + LD="${LD-ld} -m elf64_sparc" + ;; + esac + ;; + esac + fi + rm -rf conftest* + ;; + +*-*-sco3.2v5*) + # On SCO OpenServer 5, we need -belf to get full-featured binaries. + SAVE_CFLAGS="$CFLAGS" + CFLAGS="$CFLAGS -belf" + AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf, + [AC_LANG_PUSH(C) + AC_LINK_IFELSE([AC_LANG_PROGRAM([[]],[[]])],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no]) + AC_LANG_POP]) + if test x"$lt_cv_cc_needs_belf" != x"yes"; then + # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf + CFLAGS="$SAVE_CFLAGS" + fi + ;; +*-*solaris*) + # Find out which ABI we are using. + echo 'int i;' > conftest.$ac_ext + if AC_TRY_EVAL(ac_compile); then + case `/usr/bin/file conftest.o` in + *64-bit*) + case $lt_cv_prog_gnu_ld in + yes*) + case $host in + i?86-*-solaris*) + LD="${LD-ld} -m elf_x86_64" + ;; + sparc*-*-solaris*) + LD="${LD-ld} -m elf64_sparc" + ;; + esac + # GNU ld 2.21 introduced _sol2 emulations. Use them if available. + if ${LD-ld} -V | grep _sol2 >/dev/null 2>&1; then + LD="${LD-ld}_sol2" + fi + ;; + *) + if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then + LD="${LD-ld} -64" + fi + ;; + esac + ;; + esac + fi + rm -rf conftest* + ;; +esac + +need_locks="$enable_libtool_lock" +])# _LT_ENABLE_LOCK + + +# _LT_PROG_AR +# ----------- +m4_defun([_LT_PROG_AR], +[AC_CHECK_TOOLS(AR, [ar], false) +: ${AR=ar} +: ${AR_FLAGS=cru} +_LT_DECL([], [AR], [1], [The archiver]) +_LT_DECL([], [AR_FLAGS], [1], [Flags to create an archive]) + +AC_CACHE_CHECK([for archiver @FILE support], [lt_cv_ar_at_file], + [lt_cv_ar_at_file=no + AC_COMPILE_IFELSE([AC_LANG_PROGRAM], + [echo conftest.$ac_objext > conftest.lst + lt_ar_try='$AR $AR_FLAGS libconftest.a @conftest.lst >&AS_MESSAGE_LOG_FD' + AC_TRY_EVAL([lt_ar_try]) + if test "$ac_status" -eq 0; then + # Ensure the archiver fails upon bogus file names. + rm -f conftest.$ac_objext libconftest.a + AC_TRY_EVAL([lt_ar_try]) + if test "$ac_status" -ne 0; then + lt_cv_ar_at_file=@ + fi + fi + rm -f conftest.* libconftest.a + ]) + ]) + +if test "x$lt_cv_ar_at_file" = xno; then + archiver_list_spec= +else + archiver_list_spec=$lt_cv_ar_at_file +fi +_LT_DECL([], [archiver_list_spec], [1], + [How to feed a file listing to the archiver]) +])# _LT_PROG_AR + + +# _LT_CMD_OLD_ARCHIVE +# ------------------- +m4_defun([_LT_CMD_OLD_ARCHIVE], +[_LT_PROG_AR + +AC_CHECK_TOOL(STRIP, strip, :) +test -z "$STRIP" && STRIP=: +_LT_DECL([], [STRIP], [1], [A symbol stripping program]) + +AC_CHECK_TOOL(RANLIB, ranlib, :) +test -z "$RANLIB" && RANLIB=: +_LT_DECL([], [RANLIB], [1], + [Commands used to install an old-style archive]) + +# Determine commands to create old-style static archives. +old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs' +old_postinstall_cmds='chmod 644 $oldlib' +old_postuninstall_cmds= + +if test -n "$RANLIB"; then + case $host_os in + openbsd*) + old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$tool_oldlib" + ;; + *) + old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$tool_oldlib" + ;; + esac + old_archive_cmds="$old_archive_cmds~\$RANLIB \$tool_oldlib" +fi + +case $host_os in + darwin*) + lock_old_archive_extraction=yes ;; + *) + lock_old_archive_extraction=no ;; +esac +_LT_DECL([], [old_postinstall_cmds], [2]) +_LT_DECL([], [old_postuninstall_cmds], [2]) +_LT_TAGDECL([], [old_archive_cmds], [2], + [Commands used to build an old-style archive]) +_LT_DECL([], [lock_old_archive_extraction], [0], + [Whether to use a lock for old archive extraction]) +])# _LT_CMD_OLD_ARCHIVE + + +# _LT_COMPILER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS, +# [OUTPUT-FILE], [ACTION-SUCCESS], [ACTION-FAILURE]) +# ---------------------------------------------------------------- +# Check whether the given compiler option works +AC_DEFUN([_LT_COMPILER_OPTION], +[m4_require([_LT_FILEUTILS_DEFAULTS])dnl +m4_require([_LT_DECL_SED])dnl +AC_CACHE_CHECK([$1], [$2], + [$2=no + m4_if([$4], , [ac_outfile=conftest.$ac_objext], [ac_outfile=$4]) + echo "$lt_simple_compile_test_code" > conftest.$ac_ext + lt_compiler_flag="$3" + # Insert the option either (1) after the last *FLAGS variable, or + # (2) before a word containing "conftest.", or (3) at the end. + # Note that $ac_compile itself does not contain backslashes and begins + # with a dollar sign (not a hyphen), so the echo should work correctly. + # The option is referenced via a variable to avoid confusing sed. + lt_compile=`echo "$ac_compile" | $SED \ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ + -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` + (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&AS_MESSAGE_LOG_FD) + (eval "$lt_compile" 2>conftest.err) + ac_status=$? + cat conftest.err >&AS_MESSAGE_LOG_FD + echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD + if (exit $ac_status) && test -s "$ac_outfile"; then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings other than the usual output. + $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp + $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 + if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then + $2=yes + fi + fi + $RM conftest* +]) + +if test x"[$]$2" = xyes; then + m4_if([$5], , :, [$5]) +else + m4_if([$6], , :, [$6]) +fi +])# _LT_COMPILER_OPTION + +# Old name: +AU_ALIAS([AC_LIBTOOL_COMPILER_OPTION], [_LT_COMPILER_OPTION]) +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AC_LIBTOOL_COMPILER_OPTION], []) + + +# _LT_LINKER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS, +# [ACTION-SUCCESS], [ACTION-FAILURE]) +# ---------------------------------------------------- +# Check whether the given linker option works +AC_DEFUN([_LT_LINKER_OPTION], +[m4_require([_LT_FILEUTILS_DEFAULTS])dnl +m4_require([_LT_DECL_SED])dnl +AC_CACHE_CHECK([$1], [$2], + [$2=no + save_LDFLAGS="$LDFLAGS" + LDFLAGS="$LDFLAGS $3" + echo "$lt_simple_link_test_code" > conftest.$ac_ext + if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then + # The linker can only warn and ignore the option if not recognized + # So say no if there are warnings + if test -s conftest.err; then + # Append any errors to the config.log. + cat conftest.err 1>&AS_MESSAGE_LOG_FD + $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp + $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 + if diff conftest.exp conftest.er2 >/dev/null; then + $2=yes + fi + else + $2=yes + fi + fi + $RM -r conftest* + LDFLAGS="$save_LDFLAGS" +]) + +if test x"[$]$2" = xyes; then + m4_if([$4], , :, [$4]) +else + m4_if([$5], , :, [$5]) +fi +])# _LT_LINKER_OPTION + +# Old name: +AU_ALIAS([AC_LIBTOOL_LINKER_OPTION], [_LT_LINKER_OPTION]) +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AC_LIBTOOL_LINKER_OPTION], []) + + +# LT_CMD_MAX_LEN +#--------------- +AC_DEFUN([LT_CMD_MAX_LEN], +[AC_REQUIRE([AC_CANONICAL_HOST])dnl +# find the maximum length of command line arguments +AC_MSG_CHECKING([the maximum length of command line arguments]) +AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl + i=0 + teststring="ABCD" + + case $build_os in + msdosdjgpp*) + # On DJGPP, this test can blow up pretty badly due to problems in libc + # (any single argument exceeding 2000 bytes causes a buffer overrun + # during glob expansion). Even if it were fixed, the result of this + # check would be larger than it should be. + lt_cv_sys_max_cmd_len=12288; # 12K is about right + ;; + + gnu*) + # Under GNU Hurd, this test is not required because there is + # no limit to the length of command line arguments. + # Libtool will interpret -1 as no limit whatsoever + lt_cv_sys_max_cmd_len=-1; + ;; + + cygwin* | mingw* | cegcc*) + # On Win9x/ME, this test blows up -- it succeeds, but takes + # about 5 minutes as the teststring grows exponentially. + # Worse, since 9x/ME are not pre-emptively multitasking, + # you end up with a "frozen" computer, even though with patience + # the test eventually succeeds (with a max line length of 256k). + # Instead, let's just punt: use the minimum linelength reported by + # all of the supported platforms: 8192 (on NT/2K/XP). + lt_cv_sys_max_cmd_len=8192; + ;; + + mint*) + # On MiNT this can take a long time and run out of memory. + lt_cv_sys_max_cmd_len=8192; + ;; + + amigaos*) + # On AmigaOS with pdksh, this test takes hours, literally. + # So we just punt and use a minimum line length of 8192. + lt_cv_sys_max_cmd_len=8192; + ;; + + netbsd* | freebsd* | openbsd* | darwin* | dragonfly*) + # This has been around since 386BSD, at least. Likely further. + if test -x /sbin/sysctl; then + lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax` + elif test -x /usr/sbin/sysctl; then + lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax` + else + lt_cv_sys_max_cmd_len=65536 # usable default for all BSDs + fi + # And add a safety zone + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` + ;; + + interix*) + # We know the value 262144 and hardcode it with a safety zone (like BSD) + lt_cv_sys_max_cmd_len=196608 + ;; + + os2*) + # The test takes a long time on OS/2. + lt_cv_sys_max_cmd_len=8192 + ;; + + osf*) + # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure + # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not + # nice to cause kernel panics so lets avoid the loop below. + # First set a reasonable default. + lt_cv_sys_max_cmd_len=16384 + # + if test -x /sbin/sysconfig; then + case `/sbin/sysconfig -q proc exec_disable_arg_limit` in + *1*) lt_cv_sys_max_cmd_len=-1 ;; + esac + fi + ;; + sco3.2v5*) + lt_cv_sys_max_cmd_len=102400 + ;; + sysv5* | sco5v6* | sysv4.2uw2*) + kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null` + if test -n "$kargmax"; then + lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[[ ]]//'` + else + lt_cv_sys_max_cmd_len=32768 + fi + ;; + *) + lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null` + if test -n "$lt_cv_sys_max_cmd_len"; then + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` + else + # Make teststring a little bigger before we do anything with it. + # a 1K string should be a reasonable start. + for i in 1 2 3 4 5 6 7 8 ; do + teststring=$teststring$teststring + done + SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}} + # If test is not a shell built-in, we'll probably end up computing a + # maximum length that is only half of the actual maximum length, but + # we can't tell. + while { test "X"`env echo "$teststring$teststring" 2>/dev/null` \ + = "X$teststring$teststring"; } >/dev/null 2>&1 && + test $i != 17 # 1/2 MB should be enough + do + i=`expr $i + 1` + teststring=$teststring$teststring + done + # Only check the string length outside the loop. + lt_cv_sys_max_cmd_len=`expr "X$teststring" : ".*" 2>&1` + teststring= + # Add a significant safety factor because C++ compilers can tack on + # massive amounts of additional arguments before passing them to the + # linker. It appears as though 1/2 is a usable value. + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2` + fi + ;; + esac +]) +if test -n $lt_cv_sys_max_cmd_len ; then + AC_MSG_RESULT($lt_cv_sys_max_cmd_len) +else + AC_MSG_RESULT(none) +fi +max_cmd_len=$lt_cv_sys_max_cmd_len +_LT_DECL([], [max_cmd_len], [0], + [What is the maximum length of a command?]) +])# LT_CMD_MAX_LEN + +# Old name: +AU_ALIAS([AC_LIBTOOL_SYS_MAX_CMD_LEN], [LT_CMD_MAX_LEN]) +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AC_LIBTOOL_SYS_MAX_CMD_LEN], []) + + +# _LT_HEADER_DLFCN +# ---------------- +m4_defun([_LT_HEADER_DLFCN], +[AC_CHECK_HEADERS([dlfcn.h], [], [], [AC_INCLUDES_DEFAULT])dnl +])# _LT_HEADER_DLFCN + + +# _LT_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE, +# ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING) +# ---------------------------------------------------------------- +m4_defun([_LT_TRY_DLOPEN_SELF], +[m4_require([_LT_HEADER_DLFCN])dnl +if test "$cross_compiling" = yes; then : + [$4] +else + lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 + lt_status=$lt_dlunknown + cat > conftest.$ac_ext <<_LT_EOF +[#line $LINENO "configure" +#include "confdefs.h" + +#if HAVE_DLFCN_H +#include +#endif + +#include + +#ifdef RTLD_GLOBAL +# define LT_DLGLOBAL RTLD_GLOBAL +#else +# ifdef DL_GLOBAL +# define LT_DLGLOBAL DL_GLOBAL +# else +# define LT_DLGLOBAL 0 +# endif +#endif + +/* We may have to define LT_DLLAZY_OR_NOW in the command line if we + find out it does not work in some platform. */ +#ifndef LT_DLLAZY_OR_NOW +# ifdef RTLD_LAZY +# define LT_DLLAZY_OR_NOW RTLD_LAZY +# else +# ifdef DL_LAZY +# define LT_DLLAZY_OR_NOW DL_LAZY +# else +# ifdef RTLD_NOW +# define LT_DLLAZY_OR_NOW RTLD_NOW +# else +# ifdef DL_NOW +# define LT_DLLAZY_OR_NOW DL_NOW +# else +# define LT_DLLAZY_OR_NOW 0 +# endif +# endif +# endif +# endif +#endif + +/* When -fvisbility=hidden is used, assume the code has been annotated + correspondingly for the symbols needed. */ +#if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3)) +int fnord () __attribute__((visibility("default"))); +#endif + +int fnord () { return 42; } +int main () +{ + void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); + int status = $lt_dlunknown; + + if (self) + { + if (dlsym (self,"fnord")) status = $lt_dlno_uscore; + else + { + if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; + else puts (dlerror ()); + } + /* dlclose (self); */ + } + else + puts (dlerror ()); + + return status; +}] +_LT_EOF + if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext} 2>/dev/null; then + (./conftest; exit; ) >&AS_MESSAGE_LOG_FD 2>/dev/null + lt_status=$? + case x$lt_status in + x$lt_dlno_uscore) $1 ;; + x$lt_dlneed_uscore) $2 ;; + x$lt_dlunknown|x*) $3 ;; + esac + else : + # compilation failed + $3 + fi +fi +rm -fr conftest* +])# _LT_TRY_DLOPEN_SELF + + +# LT_SYS_DLOPEN_SELF +# ------------------ +AC_DEFUN([LT_SYS_DLOPEN_SELF], +[m4_require([_LT_HEADER_DLFCN])dnl +if test "x$enable_dlopen" != xyes; then + enable_dlopen=unknown + enable_dlopen_self=unknown + enable_dlopen_self_static=unknown +else + lt_cv_dlopen=no + lt_cv_dlopen_libs= + + case $host_os in + beos*) + lt_cv_dlopen="load_add_on" + lt_cv_dlopen_libs= + lt_cv_dlopen_self=yes + ;; + + mingw* | pw32* | cegcc*) + lt_cv_dlopen="LoadLibrary" + lt_cv_dlopen_libs= + ;; + + cygwin*) + lt_cv_dlopen="dlopen" + lt_cv_dlopen_libs= + ;; + + darwin*) + # if libdl is installed we need to link against it + AC_CHECK_LIB([dl], [dlopen], + [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],[ + lt_cv_dlopen="dyld" + lt_cv_dlopen_libs= + lt_cv_dlopen_self=yes + ]) + ;; + + *) + AC_CHECK_FUNC([shl_load], + [lt_cv_dlopen="shl_load"], + [AC_CHECK_LIB([dld], [shl_load], + [lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld"], + [AC_CHECK_FUNC([dlopen], + [lt_cv_dlopen="dlopen"], + [AC_CHECK_LIB([dl], [dlopen], + [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"], + [AC_CHECK_LIB([svld], [dlopen], + [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"], + [AC_CHECK_LIB([dld], [dld_link], + [lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld"]) + ]) + ]) + ]) + ]) + ]) + ;; + esac + + if test "x$lt_cv_dlopen" != xno; then + enable_dlopen=yes + else + enable_dlopen=no + fi + + case $lt_cv_dlopen in + dlopen) + save_CPPFLAGS="$CPPFLAGS" + test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H" + + save_LDFLAGS="$LDFLAGS" + wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\" + + save_LIBS="$LIBS" + LIBS="$lt_cv_dlopen_libs $LIBS" + + AC_CACHE_CHECK([whether a program can dlopen itself], + lt_cv_dlopen_self, [dnl + _LT_TRY_DLOPEN_SELF( + lt_cv_dlopen_self=yes, lt_cv_dlopen_self=yes, + lt_cv_dlopen_self=no, lt_cv_dlopen_self=cross) + ]) + + if test "x$lt_cv_dlopen_self" = xyes; then + wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\" + AC_CACHE_CHECK([whether a statically linked program can dlopen itself], + lt_cv_dlopen_self_static, [dnl + _LT_TRY_DLOPEN_SELF( + lt_cv_dlopen_self_static=yes, lt_cv_dlopen_self_static=yes, + lt_cv_dlopen_self_static=no, lt_cv_dlopen_self_static=cross) + ]) + fi + + CPPFLAGS="$save_CPPFLAGS" + LDFLAGS="$save_LDFLAGS" + LIBS="$save_LIBS" + ;; + esac + + case $lt_cv_dlopen_self in + yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;; + *) enable_dlopen_self=unknown ;; + esac + + case $lt_cv_dlopen_self_static in + yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;; + *) enable_dlopen_self_static=unknown ;; + esac +fi +_LT_DECL([dlopen_support], [enable_dlopen], [0], + [Whether dlopen is supported]) +_LT_DECL([dlopen_self], [enable_dlopen_self], [0], + [Whether dlopen of programs is supported]) +_LT_DECL([dlopen_self_static], [enable_dlopen_self_static], [0], + [Whether dlopen of statically linked programs is supported]) +])# LT_SYS_DLOPEN_SELF + +# Old name: +AU_ALIAS([AC_LIBTOOL_DLOPEN_SELF], [LT_SYS_DLOPEN_SELF]) +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AC_LIBTOOL_DLOPEN_SELF], []) + + +# _LT_COMPILER_C_O([TAGNAME]) +# --------------------------- +# Check to see if options -c and -o are simultaneously supported by compiler. +# This macro does not hard code the compiler like AC_PROG_CC_C_O. +m4_defun([_LT_COMPILER_C_O], +[m4_require([_LT_DECL_SED])dnl +m4_require([_LT_FILEUTILS_DEFAULTS])dnl +m4_require([_LT_TAG_COMPILER])dnl +AC_CACHE_CHECK([if $compiler supports -c -o file.$ac_objext], + [_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)], + [_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=no + $RM -r conftest 2>/dev/null + mkdir conftest + cd conftest + mkdir out + echo "$lt_simple_compile_test_code" > conftest.$ac_ext + + lt_compiler_flag="-o out/conftest2.$ac_objext" + # Insert the option either (1) after the last *FLAGS variable, or + # (2) before a word containing "conftest.", or (3) at the end. + # Note that $ac_compile itself does not contain backslashes and begins + # with a dollar sign (not a hyphen), so the echo should work correctly. + lt_compile=`echo "$ac_compile" | $SED \ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ + -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` + (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&AS_MESSAGE_LOG_FD) + (eval "$lt_compile" 2>out/conftest.err) + ac_status=$? + cat out/conftest.err >&AS_MESSAGE_LOG_FD + echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD + if (exit $ac_status) && test -s out/conftest2.$ac_objext + then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings + $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp + $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 + if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then + _LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes + fi + fi + chmod u+w . 2>&AS_MESSAGE_LOG_FD + $RM conftest* + # SGI C++ compiler will create directory out/ii_files/ for + # template instantiation + test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files + $RM out/* && rmdir out + cd .. + $RM -r conftest + $RM conftest* +]) +_LT_TAGDECL([compiler_c_o], [lt_cv_prog_compiler_c_o], [1], + [Does compiler simultaneously support -c and -o options?]) +])# _LT_COMPILER_C_O + + +# _LT_COMPILER_FILE_LOCKS([TAGNAME]) +# ---------------------------------- +# Check to see if we can do hard links to lock some files if needed +m4_defun([_LT_COMPILER_FILE_LOCKS], +[m4_require([_LT_ENABLE_LOCK])dnl +m4_require([_LT_FILEUTILS_DEFAULTS])dnl +_LT_COMPILER_C_O([$1]) + +hard_links="nottested" +if test "$_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)" = no && test "$need_locks" != no; then + # do not overwrite the value of need_locks provided by the user + AC_MSG_CHECKING([if we can lock with hard links]) + hard_links=yes + $RM conftest* + ln conftest.a conftest.b 2>/dev/null && hard_links=no + touch conftest.a + ln conftest.a conftest.b 2>&5 || hard_links=no + ln conftest.a conftest.b 2>/dev/null && hard_links=no + AC_MSG_RESULT([$hard_links]) + if test "$hard_links" = no; then + AC_MSG_WARN([`$CC' does not support `-c -o', so `make -j' may be unsafe]) + need_locks=warn + fi +else + need_locks=no +fi +_LT_DECL([], [need_locks], [1], [Must we lock files when doing compilation?]) +])# _LT_COMPILER_FILE_LOCKS + + +# _LT_CHECK_OBJDIR +# ---------------- +m4_defun([_LT_CHECK_OBJDIR], +[AC_CACHE_CHECK([for objdir], [lt_cv_objdir], +[rm -f .libs 2>/dev/null +mkdir .libs 2>/dev/null +if test -d .libs; then + lt_cv_objdir=.libs +else + # MS-DOS does not allow filenames that begin with a dot. + lt_cv_objdir=_libs +fi +rmdir .libs 2>/dev/null]) +objdir=$lt_cv_objdir +_LT_DECL([], [objdir], [0], + [The name of the directory that contains temporary libtool files])dnl +m4_pattern_allow([LT_OBJDIR])dnl +AC_DEFINE_UNQUOTED(LT_OBJDIR, "$lt_cv_objdir/", + [Define to the sub-directory in which libtool stores uninstalled libraries.]) +])# _LT_CHECK_OBJDIR + + +# _LT_LINKER_HARDCODE_LIBPATH([TAGNAME]) +# -------------------------------------- +# Check hardcoding attributes. +m4_defun([_LT_LINKER_HARDCODE_LIBPATH], +[AC_MSG_CHECKING([how to hardcode library paths into programs]) +_LT_TAGVAR(hardcode_action, $1)= +if test -n "$_LT_TAGVAR(hardcode_libdir_flag_spec, $1)" || + test -n "$_LT_TAGVAR(runpath_var, $1)" || + test "X$_LT_TAGVAR(hardcode_automatic, $1)" = "Xyes" ; then + + # We can hardcode non-existent directories. + if test "$_LT_TAGVAR(hardcode_direct, $1)" != no && + # If the only mechanism to avoid hardcoding is shlibpath_var, we + # have to relink, otherwise we might link with an installed library + # when we should be linking with a yet-to-be-installed one + ## test "$_LT_TAGVAR(hardcode_shlibpath_var, $1)" != no && + test "$_LT_TAGVAR(hardcode_minus_L, $1)" != no; then + # Linking always hardcodes the temporary library directory. + _LT_TAGVAR(hardcode_action, $1)=relink + else + # We can link without hardcoding, and we can hardcode nonexisting dirs. + _LT_TAGVAR(hardcode_action, $1)=immediate + fi +else + # We cannot hardcode anything, or else we can only hardcode existing + # directories. + _LT_TAGVAR(hardcode_action, $1)=unsupported +fi +AC_MSG_RESULT([$_LT_TAGVAR(hardcode_action, $1)]) + +if test "$_LT_TAGVAR(hardcode_action, $1)" = relink || + test "$_LT_TAGVAR(inherit_rpath, $1)" = yes; then + # Fast installation is not supported + enable_fast_install=no +elif test "$shlibpath_overrides_runpath" = yes || + test "$enable_shared" = no; then + # Fast installation is not necessary + enable_fast_install=needless +fi +_LT_TAGDECL([], [hardcode_action], [0], + [How to hardcode a shared library path into an executable]) +])# _LT_LINKER_HARDCODE_LIBPATH + + +# _LT_CMD_STRIPLIB +# ---------------- +m4_defun([_LT_CMD_STRIPLIB], +[m4_require([_LT_DECL_EGREP]) +striplib= +old_striplib= +AC_MSG_CHECKING([whether stripping libraries is possible]) +if test -n "$STRIP" && $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then + test -z "$old_striplib" && old_striplib="$STRIP --strip-debug" + test -z "$striplib" && striplib="$STRIP --strip-unneeded" + AC_MSG_RESULT([yes]) +else +# FIXME - insert some real tests, host_os isn't really good enough + case $host_os in + darwin*) + if test -n "$STRIP" ; then + striplib="$STRIP -x" + old_striplib="$STRIP -S" + AC_MSG_RESULT([yes]) + else + AC_MSG_RESULT([no]) + fi + ;; + *) + AC_MSG_RESULT([no]) + ;; + esac +fi +_LT_DECL([], [old_striplib], [1], [Commands to strip libraries]) +_LT_DECL([], [striplib], [1]) +])# _LT_CMD_STRIPLIB + + +# _LT_SYS_DYNAMIC_LINKER([TAG]) +# ----------------------------- +# PORTME Fill in your ld.so characteristics +m4_defun([_LT_SYS_DYNAMIC_LINKER], +[AC_REQUIRE([AC_CANONICAL_HOST])dnl +m4_require([_LT_DECL_EGREP])dnl +m4_require([_LT_FILEUTILS_DEFAULTS])dnl +m4_require([_LT_DECL_OBJDUMP])dnl +m4_require([_LT_DECL_SED])dnl +m4_require([_LT_CHECK_SHELL_FEATURES])dnl +AC_MSG_CHECKING([dynamic linker characteristics]) +m4_if([$1], + [], [ +if test "$GCC" = yes; then + case $host_os in + darwin*) lt_awk_arg="/^libraries:/,/LR/" ;; + *) lt_awk_arg="/^libraries:/" ;; + esac + case $host_os in + mingw* | cegcc*) lt_sed_strip_eq="s,=\([[A-Za-z]]:\),\1,g" ;; + *) lt_sed_strip_eq="s,=/,/,g" ;; + esac + lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e $lt_sed_strip_eq` + case $lt_search_path_spec in + *\;*) + # if the path contains ";" then we assume it to be the separator + # otherwise default to the standard path separator (i.e. ":") - it is + # assumed that no part of a normal pathname contains ";" but that should + # okay in the real world where ";" in dirpaths is itself problematic. + lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED 's/;/ /g'` + ;; + *) + lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED "s/$PATH_SEPARATOR/ /g"` + ;; + esac + # Ok, now we have the path, separated by spaces, we can step through it + # and add multilib dir if necessary. + lt_tmp_lt_search_path_spec= + lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null` + for lt_sys_path in $lt_search_path_spec; do + if test -d "$lt_sys_path/$lt_multi_os_dir"; then + lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir" + else + test -d "$lt_sys_path" && \ + lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path" + fi + done + lt_search_path_spec=`$ECHO "$lt_tmp_lt_search_path_spec" | awk ' +BEGIN {RS=" "; FS="/|\n";} { + lt_foo=""; + lt_count=0; + for (lt_i = NF; lt_i > 0; lt_i--) { + if ($lt_i != "" && $lt_i != ".") { + if ($lt_i == "..") { + lt_count++; + } else { + if (lt_count == 0) { + lt_foo="/" $lt_i lt_foo; + } else { + lt_count--; + } + } + } + } + if (lt_foo != "") { lt_freq[[lt_foo]]++; } + if (lt_freq[[lt_foo]] == 1) { print lt_foo; } +}'` + # AWK program above erroneously prepends '/' to C:/dos/paths + # for these hosts. + case $host_os in + mingw* | cegcc*) lt_search_path_spec=`$ECHO "$lt_search_path_spec" |\ + $SED 's,/\([[A-Za-z]]:\),\1,g'` ;; + esac + sys_lib_search_path_spec=`$ECHO "$lt_search_path_spec" | $lt_NL2SP` +else + sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" +fi]) +library_names_spec= +libname_spec='lib$name' +soname_spec= +shrext_cmds=".so" +postinstall_cmds= +postuninstall_cmds= +finish_cmds= +finish_eval= +shlibpath_var= +shlibpath_overrides_runpath=unknown +version_type=none +dynamic_linker="$host_os ld.so" +sys_lib_dlsearch_path_spec="/lib /usr/lib" +need_lib_prefix=unknown +hardcode_into_libs=no + +# when you set need_version to no, make sure it does not cause -set_version +# flags to be left without arguments +need_version=unknown + +case $host_os in +aix3*) + version_type=linux # correct to gnu/linux during the next big refactor + library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a' + shlibpath_var=LIBPATH + + # AIX 3 has no versioning support, so we append a major version to the name. + soname_spec='${libname}${release}${shared_ext}$major' + ;; + +aix[[4-9]]*) + version_type=linux # correct to gnu/linux during the next big refactor + need_lib_prefix=no + need_version=no + hardcode_into_libs=yes + if test "$host_cpu" = ia64; then + # AIX 5 supports IA64 + library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}' + shlibpath_var=LD_LIBRARY_PATH + else + # With GCC up to 2.95.x, collect2 would create an import file + # for dependence libraries. The import file would start with + # the line `#! .'. This would cause the generated library to + # depend on `.', always an invalid library. This was fixed in + # development snapshots of GCC prior to 3.0. + case $host_os in + aix4 | aix4.[[01]] | aix4.[[01]].*) + if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' + echo ' yes ' + echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then + : + else + can_build_shared=no + fi + ;; + esac + # AIX (on Power*) has no versioning support, so currently we can not hardcode correct + # soname into executable. Probably we can add versioning support to + # collect2, so additional links can be useful in future. + if test "$aix_use_runtimelinking" = yes; then + # If using run time linking (on AIX 4.2 or later) use lib.so + # instead of lib.a to let people know that these are not + # typical AIX shared libraries. + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + else + # We preserve .a as extension for shared libraries through AIX4.2 + # and later when we are not doing run time linking. + library_names_spec='${libname}${release}.a $libname.a' + soname_spec='${libname}${release}${shared_ext}$major' + fi + shlibpath_var=LIBPATH + fi + ;; + +amigaos*) + case $host_cpu in + powerpc) + # Since July 2007 AmigaOS4 officially supports .so libraries. + # When compiling the executable, add -use-dynld -Lsobjs: to the compileline. + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + ;; + m68k) + library_names_spec='$libname.ixlibrary $libname.a' + # Create ${libname}_ixlibrary.a entries in /sys/libs. + finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' + ;; + esac + ;; + +beos*) + library_names_spec='${libname}${shared_ext}' + dynamic_linker="$host_os ld.so" + shlibpath_var=LIBRARY_PATH + ;; + +bsdi[[45]]*) + version_type=linux # correct to gnu/linux during the next big refactor + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' + shlibpath_var=LD_LIBRARY_PATH + sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" + sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" + # the default ld.so.conf also contains /usr/contrib/lib and + # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow + # libtool to hard-code these into programs + ;; + +cygwin* | mingw* | pw32* | cegcc*) + version_type=windows + shrext_cmds=".dll" + need_version=no + need_lib_prefix=no + + case $GCC,$cc_basename in + yes,*) + # gcc + library_names_spec='$libname.dll.a' + # DLL is installed to $(libdir)/../bin by postinstall_cmds + postinstall_cmds='base_file=`basename \${file}`~ + dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~ + dldir=$destdir/`dirname \$dlpath`~ + test -d \$dldir || mkdir -p \$dldir~ + $install_prog $dir/$dlname \$dldir/$dlname~ + chmod a+x \$dldir/$dlname~ + if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then + eval '\''$striplib \$dldir/$dlname'\'' || exit \$?; + fi' + postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ + dlpath=$dir/\$dldll~ + $RM \$dlpath' + shlibpath_overrides_runpath=yes + + case $host_os in + cygwin*) + # Cygwin DLLs use 'cyg' prefix rather than 'lib' + soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' +m4_if([$1], [],[ + sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/lib/w32api"]) + ;; + mingw* | cegcc*) + # MinGW DLLs use traditional 'lib' prefix + soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' + ;; + pw32*) + # pw32 DLLs use 'pw' prefix rather than 'lib' + library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' + ;; + esac + dynamic_linker='Win32 ld.exe' + ;; + + *,cl*) + # Native MSVC + libname_spec='$name' + soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' + library_names_spec='${libname}.dll.lib' + + case $build_os in + mingw*) + sys_lib_search_path_spec= + lt_save_ifs=$IFS + IFS=';' + for lt_path in $LIB + do + IFS=$lt_save_ifs + # Let DOS variable expansion print the short 8.3 style file name. + lt_path=`cd "$lt_path" 2>/dev/null && cmd //C "for %i in (".") do @echo %~si"` + sys_lib_search_path_spec="$sys_lib_search_path_spec $lt_path" + done + IFS=$lt_save_ifs + # Convert to MSYS style. + sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | sed -e 's|\\\\|/|g' -e 's| \\([[a-zA-Z]]\\):| /\\1|g' -e 's|^ ||'` + ;; + cygwin*) + # Convert to unix form, then to dos form, then back to unix form + # but this time dos style (no spaces!) so that the unix form looks + # like /cygdrive/c/PROGRA~1:/cygdr... + sys_lib_search_path_spec=`cygpath --path --unix "$LIB"` + sys_lib_search_path_spec=`cygpath --path --dos "$sys_lib_search_path_spec" 2>/dev/null` + sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` + ;; + *) + sys_lib_search_path_spec="$LIB" + if $ECHO "$sys_lib_search_path_spec" | [$GREP ';[c-zC-Z]:/' >/dev/null]; then + # It is most probably a Windows format PATH. + sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` + else + sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` + fi + # FIXME: find the short name or the path components, as spaces are + # common. (e.g. "Program Files" -> "PROGRA~1") + ;; + esac + + # DLL is installed to $(libdir)/../bin by postinstall_cmds + postinstall_cmds='base_file=`basename \${file}`~ + dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~ + dldir=$destdir/`dirname \$dlpath`~ + test -d \$dldir || mkdir -p \$dldir~ + $install_prog $dir/$dlname \$dldir/$dlname' + postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ + dlpath=$dir/\$dldll~ + $RM \$dlpath' + shlibpath_overrides_runpath=yes + dynamic_linker='Win32 link.exe' + ;; + + *) + # Assume MSVC wrapper + library_names_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext} $libname.lib' + dynamic_linker='Win32 ld.exe' + ;; + esac + # FIXME: first we should search . and the directory the executable is in + shlibpath_var=PATH + ;; + +darwin* | rhapsody*) + dynamic_linker="$host_os dyld" + version_type=darwin + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext' + soname_spec='${libname}${release}${major}$shared_ext' + shlibpath_overrides_runpath=yes + shlibpath_var=DYLD_LIBRARY_PATH + shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`' +m4_if([$1], [],[ + sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib"]) + sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib' + ;; + +dgux*) + version_type=linux # correct to gnu/linux during the next big refactor + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + ;; + +freebsd* | dragonfly*) + # DragonFly does not have aout. When/if they implement a new + # versioning mechanism, adjust this. + if test -x /usr/bin/objformat; then + objformat=`/usr/bin/objformat` + else + case $host_os in + freebsd[[23]].*) objformat=aout ;; + *) objformat=elf ;; + esac + fi + version_type=freebsd-$objformat + case $version_type in + freebsd-elf*) + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' + need_version=no + need_lib_prefix=no + ;; + freebsd-*) + library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix' + need_version=yes + ;; + esac + shlibpath_var=LD_LIBRARY_PATH + case $host_os in + freebsd2.*) + shlibpath_overrides_runpath=yes + ;; + freebsd3.[[01]]* | freebsdelf3.[[01]]*) + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + ;; + freebsd3.[[2-9]]* | freebsdelf3.[[2-9]]* | \ + freebsd4.[[0-5]] | freebsdelf4.[[0-5]] | freebsd4.1.1 | freebsdelf4.1.1) + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + ;; + *) # from 4.6 on, and DragonFly + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + ;; + esac + ;; + +gnu*) + version_type=linux # correct to gnu/linux during the next big refactor + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + ;; + +haiku*) + version_type=linux # correct to gnu/linux during the next big refactor + need_lib_prefix=no + need_version=no + dynamic_linker="$host_os runtime_loader" + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LIBRARY_PATH + shlibpath_overrides_runpath=yes + sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib' + hardcode_into_libs=yes + ;; + +hpux9* | hpux10* | hpux11*) + # Give a soname corresponding to the major version so that dld.sl refuses to + # link against other versions. + version_type=sunos + need_lib_prefix=no + need_version=no + case $host_cpu in + ia64*) + shrext_cmds='.so' + hardcode_into_libs=yes + dynamic_linker="$host_os dld.so" + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + if test "X$HPUX_IA64_MODE" = X32; then + sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib" + else + sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64" + fi + sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec + ;; + hppa*64*) + shrext_cmds='.sl' + hardcode_into_libs=yes + dynamic_linker="$host_os dld.sl" + shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH + shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64" + sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec + ;; + *) + shrext_cmds='.sl' + dynamic_linker="$host_os dld.sl" + shlibpath_var=SHLIB_PATH + shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + ;; + esac + # HP-UX runs *really* slowly unless shared libraries are mode 555, ... + postinstall_cmds='chmod 555 $lib' + # or fails outright, so override atomically: + install_override_mode=555 + ;; + +interix[[3-9]]*) + version_type=linux # correct to gnu/linux during the next big refactor + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + ;; + +irix5* | irix6* | nonstopux*) + case $host_os in + nonstopux*) version_type=nonstopux ;; + *) + if test "$lt_cv_prog_gnu_ld" = yes; then + version_type=linux # correct to gnu/linux during the next big refactor + else + version_type=irix + fi ;; + esac + need_lib_prefix=no + need_version=no + soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}' + case $host_os in + irix5* | nonstopux*) + libsuff= shlibsuff= + ;; + *) + case $LD in # libtool.m4 will add one of these switches to LD + *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") + libsuff= shlibsuff= libmagic=32-bit;; + *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") + libsuff=32 shlibsuff=N32 libmagic=N32;; + *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") + libsuff=64 shlibsuff=64 libmagic=64-bit;; + *) libsuff= shlibsuff= libmagic=never-match;; + esac + ;; + esac + shlibpath_var=LD_LIBRARY${shlibsuff}_PATH + shlibpath_overrides_runpath=no + sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" + sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" + hardcode_into_libs=yes + ;; + +# No shared lib support for Linux oldld, aout, or coff. +linux*oldld* | linux*aout* | linux*coff*) + dynamic_linker=no + ;; + +# This must be glibc/ELF. +linux* | k*bsd*-gnu | kopensolaris*-gnu) + version_type=linux # correct to gnu/linux during the next big refactor + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + + # Some binutils ld are patched to set DT_RUNPATH + AC_CACHE_VAL([lt_cv_shlibpath_overrides_runpath], + [lt_cv_shlibpath_overrides_runpath=no + save_LDFLAGS=$LDFLAGS + save_libdir=$libdir + eval "libdir=/foo; wl=\"$_LT_TAGVAR(lt_prog_compiler_wl, $1)\"; \ + LDFLAGS=\"\$LDFLAGS $_LT_TAGVAR(hardcode_libdir_flag_spec, $1)\"" + AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])], + [AS_IF([ ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null], + [lt_cv_shlibpath_overrides_runpath=yes])]) + LDFLAGS=$save_LDFLAGS + libdir=$save_libdir + ]) + shlibpath_overrides_runpath=$lt_cv_shlibpath_overrides_runpath + + # This implies no fast_install, which is unacceptable. + # Some rework will be needed to allow for fast_install + # before this can be enabled. + hardcode_into_libs=yes + + # Append ld.so.conf contents to the search path + if test -f /etc/ld.so.conf; then + lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '` + sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra" + fi + + # We used to test for /lib/ld.so.1 and disable shared libraries on + # powerpc, because MkLinux only supported shared libraries with the + # GNU dynamic linker. Since this was broken with cross compilers, + # most powerpc-linux boxes support dynamic linking these days and + # people can always --disable-shared, the test was removed, and we + # assume the GNU/Linux dynamic linker is in use. + dynamic_linker='GNU/Linux ld.so' + ;; + +netbsdelf*-gnu) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + dynamic_linker='NetBSD ld.elf_so' + ;; + +netbsd*) + version_type=sunos + need_lib_prefix=no + need_version=no + if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' + dynamic_linker='NetBSD (a.out) ld.so' + else + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + dynamic_linker='NetBSD ld.elf_so' + fi + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + ;; + +newsos6) + version_type=linux # correct to gnu/linux during the next big refactor + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + ;; + +*nto* | *qnx*) + version_type=qnx + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + dynamic_linker='ldqnx.so' + ;; + +openbsd*) + version_type=sunos + sys_lib_dlsearch_path_spec="/usr/lib" + need_lib_prefix=no + # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs. + case $host_os in + openbsd3.3 | openbsd3.3.*) need_version=yes ;; + *) need_version=no ;; + esac + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' + shlibpath_var=LD_LIBRARY_PATH + if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + case $host_os in + openbsd2.[[89]] | openbsd2.[[89]].*) + shlibpath_overrides_runpath=no + ;; + *) + shlibpath_overrides_runpath=yes + ;; + esac + else + shlibpath_overrides_runpath=yes + fi + ;; + +os2*) + libname_spec='$name' + shrext_cmds=".dll" + need_lib_prefix=no + library_names_spec='$libname${shared_ext} $libname.a' + dynamic_linker='OS/2 ld.exe' + shlibpath_var=LIBPATH + ;; + +osf3* | osf4* | osf5*) + version_type=osf + need_lib_prefix=no + need_version=no + soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + shlibpath_var=LD_LIBRARY_PATH + sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" + sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" + ;; + +rdos*) + dynamic_linker=no + ;; + +solaris*) + version_type=linux # correct to gnu/linux during the next big refactor + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + # ldd complains unless libraries are executable + postinstall_cmds='chmod +x $lib' + ;; + +sunos4*) + version_type=sunos + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' + finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + if test "$with_gnu_ld" = yes; then + need_lib_prefix=no + fi + need_version=yes + ;; + +sysv4 | sysv4.3*) + version_type=linux # correct to gnu/linux during the next big refactor + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + case $host_vendor in + sni) + shlibpath_overrides_runpath=no + need_lib_prefix=no + runpath_var=LD_RUN_PATH + ;; + siemens) + need_lib_prefix=no + ;; + motorola) + need_lib_prefix=no + need_version=no + shlibpath_overrides_runpath=no + sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' + ;; + esac + ;; + +sysv4*MP*) + if test -d /usr/nec ;then + version_type=linux # correct to gnu/linux during the next big refactor + library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}' + soname_spec='$libname${shared_ext}.$major' + shlibpath_var=LD_LIBRARY_PATH + fi + ;; + +sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) + version_type=freebsd-elf + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + if test "$with_gnu_ld" = yes; then + sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib' + else + sys_lib_search_path_spec='/usr/ccs/lib /usr/lib' + case $host_os in + sco3.2v5*) + sys_lib_search_path_spec="$sys_lib_search_path_spec /lib" + ;; + esac + fi + sys_lib_dlsearch_path_spec='/usr/lib' + ;; + +tpf*) + # TPF is a cross-target only. Preferred cross-host = GNU/Linux. + version_type=linux # correct to gnu/linux during the next big refactor + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + ;; + +uts4*) + version_type=linux # correct to gnu/linux during the next big refactor + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + ;; + +*) + dynamic_linker=no + ;; +esac +AC_MSG_RESULT([$dynamic_linker]) +test "$dynamic_linker" = no && can_build_shared=no + +variables_saved_for_relink="PATH $shlibpath_var $runpath_var" +if test "$GCC" = yes; then + variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" +fi + +if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then + sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec" +fi +if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then + sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec" +fi + +_LT_DECL([], [variables_saved_for_relink], [1], + [Variables whose values should be saved in libtool wrapper scripts and + restored at link time]) +_LT_DECL([], [need_lib_prefix], [0], + [Do we need the "lib" prefix for modules?]) +_LT_DECL([], [need_version], [0], [Do we need a version for libraries?]) +_LT_DECL([], [version_type], [0], [Library versioning type]) +_LT_DECL([], [runpath_var], [0], [Shared library runtime path variable]) +_LT_DECL([], [shlibpath_var], [0],[Shared library path variable]) +_LT_DECL([], [shlibpath_overrides_runpath], [0], + [Is shlibpath searched before the hard-coded library search path?]) +_LT_DECL([], [libname_spec], [1], [Format of library name prefix]) +_LT_DECL([], [library_names_spec], [1], + [[List of archive names. First name is the real one, the rest are links. + The last name is the one that the linker finds with -lNAME]]) +_LT_DECL([], [soname_spec], [1], + [[The coded name of the library, if different from the real name]]) +_LT_DECL([], [install_override_mode], [1], + [Permission mode override for installation of shared libraries]) +_LT_DECL([], [postinstall_cmds], [2], + [Command to use after installation of a shared archive]) +_LT_DECL([], [postuninstall_cmds], [2], + [Command to use after uninstallation of a shared archive]) +_LT_DECL([], [finish_cmds], [2], + [Commands used to finish a libtool library installation in a directory]) +_LT_DECL([], [finish_eval], [1], + [[As "finish_cmds", except a single script fragment to be evaled but + not shown]]) +_LT_DECL([], [hardcode_into_libs], [0], + [Whether we should hardcode library paths into libraries]) +_LT_DECL([], [sys_lib_search_path_spec], [2], + [Compile-time system search path for libraries]) +_LT_DECL([], [sys_lib_dlsearch_path_spec], [2], + [Run-time system search path for libraries]) +])# _LT_SYS_DYNAMIC_LINKER + + +# _LT_PATH_TOOL_PREFIX(TOOL) +# -------------------------- +# find a file program which can recognize shared library +AC_DEFUN([_LT_PATH_TOOL_PREFIX], +[m4_require([_LT_DECL_EGREP])dnl +AC_MSG_CHECKING([for $1]) +AC_CACHE_VAL(lt_cv_path_MAGIC_CMD, +[case $MAGIC_CMD in +[[\\/*] | ?:[\\/]*]) + lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. + ;; +*) + lt_save_MAGIC_CMD="$MAGIC_CMD" + lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR +dnl $ac_dummy forces splitting on constant user-supplied paths. +dnl POSIX.2 word splitting is done only on the output of word expansions, +dnl not every word. This closes a longstanding sh security hole. + ac_dummy="m4_if([$2], , $PATH, [$2])" + for ac_dir in $ac_dummy; do + IFS="$lt_save_ifs" + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/$1; then + lt_cv_path_MAGIC_CMD="$ac_dir/$1" + if test -n "$file_magic_test_file"; then + case $deplibs_check_method in + "file_magic "*) + file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"` + MAGIC_CMD="$lt_cv_path_MAGIC_CMD" + if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | + $EGREP "$file_magic_regex" > /dev/null; then + : + else + cat <<_LT_EOF 1>&2 + +*** Warning: the command libtool uses to detect shared libraries, +*** $file_magic_cmd, produces output that libtool cannot recognize. +*** The result is that libtool may fail to recognize shared libraries +*** as such. This will affect the creation of libtool libraries that +*** depend on shared libraries, but programs linked with such libtool +*** libraries will work regardless of this problem. Nevertheless, you +*** may want to report the problem to your system manager and/or to +*** bug-libtool@gnu.org + +_LT_EOF + fi ;; + esac + fi + break + fi + done + IFS="$lt_save_ifs" + MAGIC_CMD="$lt_save_MAGIC_CMD" + ;; +esac]) +MAGIC_CMD="$lt_cv_path_MAGIC_CMD" +if test -n "$MAGIC_CMD"; then + AC_MSG_RESULT($MAGIC_CMD) +else + AC_MSG_RESULT(no) +fi +_LT_DECL([], [MAGIC_CMD], [0], + [Used to examine libraries when file_magic_cmd begins with "file"])dnl +])# _LT_PATH_TOOL_PREFIX + +# Old name: +AU_ALIAS([AC_PATH_TOOL_PREFIX], [_LT_PATH_TOOL_PREFIX]) +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AC_PATH_TOOL_PREFIX], []) + + +# _LT_PATH_MAGIC +# -------------- +# find a file program which can recognize a shared library +m4_defun([_LT_PATH_MAGIC], +[_LT_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin$PATH_SEPARATOR$PATH) +if test -z "$lt_cv_path_MAGIC_CMD"; then + if test -n "$ac_tool_prefix"; then + _LT_PATH_TOOL_PREFIX(file, /usr/bin$PATH_SEPARATOR$PATH) + else + MAGIC_CMD=: + fi +fi +])# _LT_PATH_MAGIC + + +# LT_PATH_LD +# ---------- +# find the pathname to the GNU or non-GNU linker +AC_DEFUN([LT_PATH_LD], +[AC_REQUIRE([AC_PROG_CC])dnl +AC_REQUIRE([AC_CANONICAL_HOST])dnl +AC_REQUIRE([AC_CANONICAL_BUILD])dnl +m4_require([_LT_DECL_SED])dnl +m4_require([_LT_DECL_EGREP])dnl +m4_require([_LT_PROG_ECHO_BACKSLASH])dnl + +AC_ARG_WITH([gnu-ld], + [AS_HELP_STRING([--with-gnu-ld], + [assume the C compiler uses GNU ld @<:@default=no@:>@])], + [test "$withval" = no || with_gnu_ld=yes], + [with_gnu_ld=no])dnl + +ac_prog=ld +if test "$GCC" = yes; then + # Check if gcc -print-prog-name=ld gives a path. + AC_MSG_CHECKING([for ld used by $CC]) + case $host in + *-*-mingw*) + # gcc leaves a trailing carriage return which upsets mingw + ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; + *) + ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; + esac + case $ac_prog in + # Accept absolute paths. + [[\\/]]* | ?:[[\\/]]*) + re_direlt='/[[^/]][[^/]]*/\.\./' + # Canonicalize the pathname of ld + ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'` + while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do + ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"` + done + test -z "$LD" && LD="$ac_prog" + ;; + "") + # If it fails, then pretend we aren't using GCC. + ac_prog=ld + ;; + *) + # If it is relative, then search for the first ld in PATH. + with_gnu_ld=unknown + ;; + esac +elif test "$with_gnu_ld" = yes; then + AC_MSG_CHECKING([for GNU ld]) +else + AC_MSG_CHECKING([for non-GNU ld]) +fi +AC_CACHE_VAL(lt_cv_path_LD, +[if test -z "$LD"; then + lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR + for ac_dir in $PATH; do + IFS="$lt_save_ifs" + test -z "$ac_dir" && ac_dir=. + if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then + lt_cv_path_LD="$ac_dir/$ac_prog" + # Check to see if the program is GNU ld. I'd rather use --version, + # but apparently some variants of GNU ld only accept -v. + # Break only if it was the GNU/non-GNU ld that we prefer. + case `"$lt_cv_path_LD" -v 2>&1 &1 /dev/null 2>&1; then + lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' + lt_cv_file_magic_cmd='func_win32_libid' + else + # Keep this pattern in sync with the one in func_win32_libid. + lt_cv_deplibs_check_method='file_magic file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)' + lt_cv_file_magic_cmd='$OBJDUMP -f' + fi + ;; + +cegcc*) + # use the weaker test based on 'objdump'. See mingw*. + lt_cv_deplibs_check_method='file_magic file format pe-arm-.*little(.*architecture: arm)?' + lt_cv_file_magic_cmd='$OBJDUMP -f' + ;; + +darwin* | rhapsody*) + lt_cv_deplibs_check_method=pass_all + ;; + +freebsd* | dragonfly*) + if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then + case $host_cpu in + i*86 ) + # Not sure whether the presence of OpenBSD here was a mistake. + # Let's accept both of them until this is cleared up. + lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[[3-9]]86 (compact )?demand paged shared library' + lt_cv_file_magic_cmd=/usr/bin/file + lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` + ;; + esac + else + lt_cv_deplibs_check_method=pass_all + fi + ;; + +gnu*) + lt_cv_deplibs_check_method=pass_all + ;; + +haiku*) + lt_cv_deplibs_check_method=pass_all + ;; + +hpux10.20* | hpux11*) + lt_cv_file_magic_cmd=/usr/bin/file + case $host_cpu in + ia64*) + lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|ELF-[[0-9]][[0-9]]) shared object file - IA64' + lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so + ;; + hppa*64*) + [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF[ -][0-9][0-9])(-bit)?( [LM]SB)? shared object( file)?[, -]* PA-RISC [0-9]\.[0-9]'] + lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl + ;; + *) + lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|PA-RISC[[0-9]]\.[[0-9]]) shared library' + lt_cv_file_magic_test_file=/usr/lib/libc.sl + ;; + esac + ;; + +interix[[3-9]]*) + # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here + lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|\.a)$' + ;; + +irix5* | irix6* | nonstopux*) + case $LD in + *-32|*"-32 ") libmagic=32-bit;; + *-n32|*"-n32 ") libmagic=N32;; + *-64|*"-64 ") libmagic=64-bit;; + *) libmagic=never-match;; + esac + lt_cv_deplibs_check_method=pass_all + ;; + +# This must be glibc/ELF. +linux* | k*bsd*-gnu | kopensolaris*-gnu) + lt_cv_deplibs_check_method=pass_all + ;; + +netbsd* | netbsdelf*-gnu) + if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then + lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$' + else + lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|_pic\.a)$' + fi + ;; + +newos6*) + lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (executable|dynamic lib)' + lt_cv_file_magic_cmd=/usr/bin/file + lt_cv_file_magic_test_file=/usr/lib/libnls.so + ;; + +*nto* | *qnx*) + lt_cv_deplibs_check_method=pass_all + ;; + +openbsd*) + if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|\.so|_pic\.a)$' + else + lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$' + fi + ;; + +osf3* | osf4* | osf5*) + lt_cv_deplibs_check_method=pass_all + ;; + +rdos*) + lt_cv_deplibs_check_method=pass_all + ;; + +solaris*) + lt_cv_deplibs_check_method=pass_all + ;; + +sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) + lt_cv_deplibs_check_method=pass_all + ;; + +sysv4 | sysv4.3*) + case $host_vendor in + motorola) + lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib) M[[0-9]][[0-9]]* Version [[0-9]]' + lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*` + ;; + ncr) + lt_cv_deplibs_check_method=pass_all + ;; + sequent) + lt_cv_file_magic_cmd='/bin/file' + lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )' + ;; + sni) + lt_cv_file_magic_cmd='/bin/file' + lt_cv_deplibs_check_method="file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB dynamic lib" + lt_cv_file_magic_test_file=/lib/libc.so + ;; + siemens) + lt_cv_deplibs_check_method=pass_all + ;; + pc) + lt_cv_deplibs_check_method=pass_all + ;; + esac + ;; + +tpf*) + lt_cv_deplibs_check_method=pass_all + ;; +esac +]) + +file_magic_glob= +want_nocaseglob=no +if test "$build" = "$host"; then + case $host_os in + mingw* | pw32*) + if ( shopt | grep nocaseglob ) >/dev/null 2>&1; then + want_nocaseglob=yes + else + file_magic_glob=`echo aAbBcCdDeEfFgGhHiIjJkKlLmMnNoOpPqQrRsStTuUvVwWxXyYzZ | $SED -e "s/\(..\)/s\/[[\1]]\/[[\1]]\/g;/g"` + fi + ;; + esac +fi + +file_magic_cmd=$lt_cv_file_magic_cmd +deplibs_check_method=$lt_cv_deplibs_check_method +test -z "$deplibs_check_method" && deplibs_check_method=unknown + +_LT_DECL([], [deplibs_check_method], [1], + [Method to check whether dependent libraries are shared objects]) +_LT_DECL([], [file_magic_cmd], [1], + [Command to use when deplibs_check_method = "file_magic"]) +_LT_DECL([], [file_magic_glob], [1], + [How to find potential files when deplibs_check_method = "file_magic"]) +_LT_DECL([], [want_nocaseglob], [1], + [Find potential files using nocaseglob when deplibs_check_method = "file_magic"]) +])# _LT_CHECK_MAGIC_METHOD + + +# LT_PATH_NM +# ---------- +# find the pathname to a BSD- or MS-compatible name lister +AC_DEFUN([LT_PATH_NM], +[AC_REQUIRE([AC_PROG_CC])dnl +AC_CACHE_CHECK([for BSD- or MS-compatible name lister (nm)], lt_cv_path_NM, +[if test -n "$NM"; then + # Let the user override the test. + lt_cv_path_NM="$NM" +else + lt_nm_to_check="${ac_tool_prefix}nm" + if test -n "$ac_tool_prefix" && test "$build" = "$host"; then + lt_nm_to_check="$lt_nm_to_check nm" + fi + for lt_tmp_nm in $lt_nm_to_check; do + lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR + for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do + IFS="$lt_save_ifs" + test -z "$ac_dir" && ac_dir=. + tmp_nm="$ac_dir/$lt_tmp_nm" + if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then + # Check to see if the nm accepts a BSD-compat flag. + # Adding the `sed 1q' prevents false positives on HP-UX, which says: + # nm: unknown option "B" ignored + # Tru64's nm complains that /dev/null is an invalid object file + case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in + */dev/null* | *'Invalid file or object type'*) + lt_cv_path_NM="$tmp_nm -B" + break + ;; + *) + case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in + */dev/null*) + lt_cv_path_NM="$tmp_nm -p" + break + ;; + *) + lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but + continue # so that we can try to find one that supports BSD flags + ;; + esac + ;; + esac + fi + done + IFS="$lt_save_ifs" + done + : ${lt_cv_path_NM=no} +fi]) +if test "$lt_cv_path_NM" != "no"; then + NM="$lt_cv_path_NM" +else + # Didn't find any BSD compatible name lister, look for dumpbin. + if test -n "$DUMPBIN"; then : + # Let the user override the test. + else + AC_CHECK_TOOLS(DUMPBIN, [dumpbin "link -dump"], :) + case `$DUMPBIN -symbols /dev/null 2>&1 | sed '1q'` in + *COFF*) + DUMPBIN="$DUMPBIN -symbols" + ;; + *) + DUMPBIN=: + ;; + esac + fi + AC_SUBST([DUMPBIN]) + if test "$DUMPBIN" != ":"; then + NM="$DUMPBIN" + fi +fi +test -z "$NM" && NM=nm +AC_SUBST([NM]) +_LT_DECL([], [NM], [1], [A BSD- or MS-compatible name lister])dnl + +AC_CACHE_CHECK([the name lister ($NM) interface], [lt_cv_nm_interface], + [lt_cv_nm_interface="BSD nm" + echo "int some_variable = 0;" > conftest.$ac_ext + (eval echo "\"\$as_me:$LINENO: $ac_compile\"" >&AS_MESSAGE_LOG_FD) + (eval "$ac_compile" 2>conftest.err) + cat conftest.err >&AS_MESSAGE_LOG_FD + (eval echo "\"\$as_me:$LINENO: $NM \\\"conftest.$ac_objext\\\"\"" >&AS_MESSAGE_LOG_FD) + (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out) + cat conftest.err >&AS_MESSAGE_LOG_FD + (eval echo "\"\$as_me:$LINENO: output\"" >&AS_MESSAGE_LOG_FD) + cat conftest.out >&AS_MESSAGE_LOG_FD + if $GREP 'External.*some_variable' conftest.out > /dev/null; then + lt_cv_nm_interface="MS dumpbin" + fi + rm -f conftest*]) +])# LT_PATH_NM + +# Old names: +AU_ALIAS([AM_PROG_NM], [LT_PATH_NM]) +AU_ALIAS([AC_PROG_NM], [LT_PATH_NM]) +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AM_PROG_NM], []) +dnl AC_DEFUN([AC_PROG_NM], []) + +# _LT_CHECK_SHAREDLIB_FROM_LINKLIB +# -------------------------------- +# how to determine the name of the shared library +# associated with a specific link library. +# -- PORTME fill in with the dynamic library characteristics +m4_defun([_LT_CHECK_SHAREDLIB_FROM_LINKLIB], +[m4_require([_LT_DECL_EGREP]) +m4_require([_LT_DECL_OBJDUMP]) +m4_require([_LT_DECL_DLLTOOL]) +AC_CACHE_CHECK([how to associate runtime and link libraries], +lt_cv_sharedlib_from_linklib_cmd, +[lt_cv_sharedlib_from_linklib_cmd='unknown' + +case $host_os in +cygwin* | mingw* | pw32* | cegcc*) + # two different shell functions defined in ltmain.sh + # decide which to use based on capabilities of $DLLTOOL + case `$DLLTOOL --help 2>&1` in + *--identify-strict*) + lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib + ;; + *) + lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib_fallback + ;; + esac + ;; +*) + # fallback: assume linklib IS sharedlib + lt_cv_sharedlib_from_linklib_cmd="$ECHO" + ;; +esac +]) +sharedlib_from_linklib_cmd=$lt_cv_sharedlib_from_linklib_cmd +test -z "$sharedlib_from_linklib_cmd" && sharedlib_from_linklib_cmd=$ECHO + +_LT_DECL([], [sharedlib_from_linklib_cmd], [1], + [Command to associate shared and link libraries]) +])# _LT_CHECK_SHAREDLIB_FROM_LINKLIB + + +# _LT_PATH_MANIFEST_TOOL +# ---------------------- +# locate the manifest tool +m4_defun([_LT_PATH_MANIFEST_TOOL], +[AC_CHECK_TOOL(MANIFEST_TOOL, mt, :) +test -z "$MANIFEST_TOOL" && MANIFEST_TOOL=mt +AC_CACHE_CHECK([if $MANIFEST_TOOL is a manifest tool], [lt_cv_path_mainfest_tool], + [lt_cv_path_mainfest_tool=no + echo "$as_me:$LINENO: $MANIFEST_TOOL '-?'" >&AS_MESSAGE_LOG_FD + $MANIFEST_TOOL '-?' 2>conftest.err > conftest.out + cat conftest.err >&AS_MESSAGE_LOG_FD + if $GREP 'Manifest Tool' conftest.out > /dev/null; then + lt_cv_path_mainfest_tool=yes + fi + rm -f conftest*]) +if test "x$lt_cv_path_mainfest_tool" != xyes; then + MANIFEST_TOOL=: +fi +_LT_DECL([], [MANIFEST_TOOL], [1], [Manifest tool])dnl +])# _LT_PATH_MANIFEST_TOOL + + +# LT_LIB_M +# -------- +# check for math library +AC_DEFUN([LT_LIB_M], +[AC_REQUIRE([AC_CANONICAL_HOST])dnl +LIBM= +case $host in +*-*-beos* | *-*-cegcc* | *-*-cygwin* | *-*-haiku* | *-*-pw32* | *-*-darwin*) + # These system don't have libm, or don't need it + ;; +*-ncr-sysv4.3*) + AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw") + AC_CHECK_LIB(m, cos, LIBM="$LIBM -lm") + ;; +*) + AC_CHECK_LIB(m, cos, LIBM="-lm") + ;; +esac +AC_SUBST([LIBM]) +])# LT_LIB_M + +# Old name: +AU_ALIAS([AC_CHECK_LIBM], [LT_LIB_M]) +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AC_CHECK_LIBM], []) + + +# _LT_COMPILER_NO_RTTI([TAGNAME]) +# ------------------------------- +m4_defun([_LT_COMPILER_NO_RTTI], +[m4_require([_LT_TAG_COMPILER])dnl + +_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)= + +if test "$GCC" = yes; then + case $cc_basename in + nvcc*) + _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -Xcompiler -fno-builtin' ;; + *) + _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin' ;; + esac + + _LT_COMPILER_OPTION([if $compiler supports -fno-rtti -fno-exceptions], + lt_cv_prog_compiler_rtti_exceptions, + [-fno-rtti -fno-exceptions], [], + [_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)="$_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) -fno-rtti -fno-exceptions"]) +fi +_LT_TAGDECL([no_builtin_flag], [lt_prog_compiler_no_builtin_flag], [1], + [Compiler flag to turn off builtin functions]) +])# _LT_COMPILER_NO_RTTI + + +# _LT_CMD_GLOBAL_SYMBOLS +# ---------------------- +m4_defun([_LT_CMD_GLOBAL_SYMBOLS], +[AC_REQUIRE([AC_CANONICAL_HOST])dnl +AC_REQUIRE([AC_PROG_CC])dnl +AC_REQUIRE([AC_PROG_AWK])dnl +AC_REQUIRE([LT_PATH_NM])dnl +AC_REQUIRE([LT_PATH_LD])dnl +m4_require([_LT_DECL_SED])dnl +m4_require([_LT_DECL_EGREP])dnl +m4_require([_LT_TAG_COMPILER])dnl + +# Check for command to grab the raw symbol name followed by C symbol from nm. +AC_MSG_CHECKING([command to parse $NM output from $compiler object]) +AC_CACHE_VAL([lt_cv_sys_global_symbol_pipe], +[ +# These are sane defaults that work on at least a few old systems. +# [They come from Ultrix. What could be older than Ultrix?!! ;)] + +# Character class describing NM global symbol codes. +symcode='[[BCDEGRST]]' + +# Regexp to match symbols that can be accessed directly from C. +sympat='\([[_A-Za-z]][[_A-Za-z0-9]]*\)' + +# Define system-specific variables. +case $host_os in +aix*) + symcode='[[BCDT]]' + ;; +cygwin* | mingw* | pw32* | cegcc*) + symcode='[[ABCDGISTW]]' + ;; +hpux*) + if test "$host_cpu" = ia64; then + symcode='[[ABCDEGRST]]' + fi + ;; +irix* | nonstopux*) + symcode='[[BCDEGRST]]' + ;; +osf*) + symcode='[[BCDEGQRST]]' + ;; +solaris*) + symcode='[[BDRT]]' + ;; +sco3.2v5*) + symcode='[[DT]]' + ;; +sysv4.2uw2*) + symcode='[[DT]]' + ;; +sysv5* | sco5v6* | unixware* | OpenUNIX*) + symcode='[[ABDT]]' + ;; +sysv4) + symcode='[[DFNSTU]]' + ;; +esac + +# If we're using GNU nm, then use its standard symbol codes. +case `$NM -V 2>&1` in +*GNU* | *'with BFD'*) + symcode='[[ABCDGIRSTW]]' ;; +esac + +# Transform an extracted symbol line into a proper C declaration. +# Some systems (esp. on ia64) link data and code symbols differently, +# so use this general approach. +lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" + +# Transform an extracted symbol line into symbol name and symbol address +lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\)[[ ]]*$/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (void *) \&\2},/p'" +lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([[^ ]]*\)[[ ]]*$/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \(lib[[^ ]]*\)$/ {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"lib\2\", (void *) \&\2},/p'" + +# Handle CRLF in mingw tool chain +opt_cr= +case $build_os in +mingw*) + opt_cr=`$ECHO 'x\{0,1\}' | tr x '\015'` # option cr in regexp + ;; +esac + +# Try without a prefix underscore, then with it. +for ac_symprfx in "" "_"; do + + # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol. + symxfrm="\\1 $ac_symprfx\\2 \\2" + + # Write the raw and C identifiers. + if test "$lt_cv_nm_interface" = "MS dumpbin"; then + # Fake it for dumpbin and say T for any non-static function + # and D for any global variable. + # Also find C++ and __fastcall symbols from MSVC++, + # which start with @ or ?. + lt_cv_sys_global_symbol_pipe="$AWK ['"\ +" {last_section=section; section=\$ 3};"\ +" /^COFF SYMBOL TABLE/{for(i in hide) delete hide[i]};"\ +" /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\ +" \$ 0!~/External *\|/{next};"\ +" / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\ +" {if(hide[section]) next};"\ +" {f=0}; \$ 0~/\(\).*\|/{f=1}; {printf f ? \"T \" : \"D \"};"\ +" {split(\$ 0, a, /\||\r/); split(a[2], s)};"\ +" s[1]~/^[@?]/{print s[1], s[1]; next};"\ +" s[1]~prfx {split(s[1],t,\"@\"); print t[1], substr(t[1],length(prfx))}"\ +" ' prfx=^$ac_symprfx]" + else + lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[ ]]\($symcode$symcode*\)[[ ]][[ ]]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'" + fi + lt_cv_sys_global_symbol_pipe="$lt_cv_sys_global_symbol_pipe | sed '/ __gnu_lto/d'" + + # Check to see that the pipe works correctly. + pipe_works=no + + rm -f conftest* + cat > conftest.$ac_ext <<_LT_EOF +#ifdef __cplusplus +extern "C" { +#endif +char nm_test_var; +void nm_test_func(void); +void nm_test_func(void){} +#ifdef __cplusplus +} +#endif +int main(){nm_test_var='a';nm_test_func();return(0);} +_LT_EOF + + if AC_TRY_EVAL(ac_compile); then + # Now try to grab the symbols. + nlist=conftest.nm + if AC_TRY_EVAL(NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist) && test -s "$nlist"; then + # Try sorting and uniquifying the output. + if sort "$nlist" | uniq > "$nlist"T; then + mv -f "$nlist"T "$nlist" + else + rm -f "$nlist"T + fi + + # Make sure that we snagged all the symbols we need. + if $GREP ' nm_test_var$' "$nlist" >/dev/null; then + if $GREP ' nm_test_func$' "$nlist" >/dev/null; then + cat <<_LT_EOF > conftest.$ac_ext +/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests. */ +#if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE) +/* DATA imports from DLLs on WIN32 con't be const, because runtime + relocations are performed -- see ld's documentation on pseudo-relocs. */ +# define LT@&t@_DLSYM_CONST +#elif defined(__osf__) +/* This system does not cope well with relocations in const data. */ +# define LT@&t@_DLSYM_CONST +#else +# define LT@&t@_DLSYM_CONST const +#endif + +#ifdef __cplusplus +extern "C" { +#endif + +_LT_EOF + # Now generate the symbol file. + eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | $GREP -v main >> conftest.$ac_ext' + + cat <<_LT_EOF >> conftest.$ac_ext + +/* The mapping between symbol names and symbols. */ +LT@&t@_DLSYM_CONST struct { + const char *name; + void *address; +} +lt__PROGRAM__LTX_preloaded_symbols[[]] = +{ + { "@PROGRAM@", (void *) 0 }, +_LT_EOF + $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (void *) \&\2},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext + cat <<\_LT_EOF >> conftest.$ac_ext + {0, (void *) 0} +}; + +/* This works around a problem in FreeBSD linker */ +#ifdef FREEBSD_WORKAROUND +static const void *lt_preloaded_setup() { + return lt__PROGRAM__LTX_preloaded_symbols; +} +#endif + +#ifdef __cplusplus +} +#endif +_LT_EOF + # Now try linking the two files. + mv conftest.$ac_objext conftstm.$ac_objext + lt_globsym_save_LIBS=$LIBS + lt_globsym_save_CFLAGS=$CFLAGS + LIBS="conftstm.$ac_objext" + CFLAGS="$CFLAGS$_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)" + if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext}; then + pipe_works=yes + fi + LIBS=$lt_globsym_save_LIBS + CFLAGS=$lt_globsym_save_CFLAGS + else + echo "cannot find nm_test_func in $nlist" >&AS_MESSAGE_LOG_FD + fi + else + echo "cannot find nm_test_var in $nlist" >&AS_MESSAGE_LOG_FD + fi + else + echo "cannot run $lt_cv_sys_global_symbol_pipe" >&AS_MESSAGE_LOG_FD + fi + else + echo "$progname: failed program was:" >&AS_MESSAGE_LOG_FD + cat conftest.$ac_ext >&5 + fi + rm -rf conftest* conftst* + + # Do not use the global_symbol_pipe unless it works. + if test "$pipe_works" = yes; then + break + else + lt_cv_sys_global_symbol_pipe= + fi +done +]) +if test -z "$lt_cv_sys_global_symbol_pipe"; then + lt_cv_sys_global_symbol_to_cdecl= +fi +if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then + AC_MSG_RESULT(failed) +else + AC_MSG_RESULT(ok) +fi + +# Response file support. +if test "$lt_cv_nm_interface" = "MS dumpbin"; then + nm_file_list_spec='@' +elif $NM --help 2>/dev/null | grep '[[@]]FILE' >/dev/null; then + nm_file_list_spec='@' +fi + +_LT_DECL([global_symbol_pipe], [lt_cv_sys_global_symbol_pipe], [1], + [Take the output of nm and produce a listing of raw symbols and C names]) +_LT_DECL([global_symbol_to_cdecl], [lt_cv_sys_global_symbol_to_cdecl], [1], + [Transform the output of nm in a proper C declaration]) +_LT_DECL([global_symbol_to_c_name_address], + [lt_cv_sys_global_symbol_to_c_name_address], [1], + [Transform the output of nm in a C name address pair]) +_LT_DECL([global_symbol_to_c_name_address_lib_prefix], + [lt_cv_sys_global_symbol_to_c_name_address_lib_prefix], [1], + [Transform the output of nm in a C name address pair when lib prefix is needed]) +_LT_DECL([], [nm_file_list_spec], [1], + [Specify filename containing input files for $NM]) +]) # _LT_CMD_GLOBAL_SYMBOLS + + +# _LT_COMPILER_PIC([TAGNAME]) +# --------------------------- +m4_defun([_LT_COMPILER_PIC], +[m4_require([_LT_TAG_COMPILER])dnl +_LT_TAGVAR(lt_prog_compiler_wl, $1)= +_LT_TAGVAR(lt_prog_compiler_pic, $1)= +_LT_TAGVAR(lt_prog_compiler_static, $1)= + +m4_if([$1], [CXX], [ + # C++ specific cases for pic, static, wl, etc. + if test "$GXX" = yes; then + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' + + case $host_os in + aix*) + # All AIX code is PIC. + if test "$host_cpu" = ia64; then + # AIX 5 now supports IA64 processor + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + fi + ;; + + amigaos*) + case $host_cpu in + powerpc) + # see comment about AmigaOS4 .so support + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + ;; + m68k) + # FIXME: we need at least 68020 code to build shared libraries, but + # adding the `-m68020' flag to GCC prevents building anything better, + # like `-m68040'. + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4' + ;; + esac + ;; + + beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) + # PIC is the default for these OSes. + ;; + mingw* | cygwin* | os2* | pw32* | cegcc*) + # This hack is so that the source file can tell whether it is being + # built for inclusion in a dll (and should export symbols for example). + # Although the cygwin gcc ignores -fPIC, still need this for old-style + # (--disable-auto-import) libraries + m4_if([$1], [GCJ], [], + [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT']) + ;; + darwin* | rhapsody*) + # PIC is the default on this platform + # Common symbols not allowed in MH_DYLIB files + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common' + ;; + *djgpp*) + # DJGPP does not support shared libraries at all + _LT_TAGVAR(lt_prog_compiler_pic, $1)= + ;; + haiku*) + # PIC is the default for Haiku. + # The "-static" flag exists, but is broken. + _LT_TAGVAR(lt_prog_compiler_static, $1)= + ;; + interix[[3-9]]*) + # Interix 3.x gcc -fpic/-fPIC options generate broken code. + # Instead, we relocate shared libraries at runtime. + ;; + sysv4*MP*) + if test -d /usr/nec; then + _LT_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic + fi + ;; + hpux*) + # PIC is the default for 64-bit PA HP-UX, but not for 32-bit + # PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag + # sets the default TLS model and affects inlining. + case $host_cpu in + hppa*64*) + ;; + *) + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + ;; + esac + ;; + *qnx* | *nto*) + # QNX uses GNU C++, but need to define -shared option too, otherwise + # it will coredump. + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared' + ;; + *) + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + ;; + esac + else + case $host_os in + aix[[4-9]]*) + # All AIX code is PIC. + if test "$host_cpu" = ia64; then + # AIX 5 now supports IA64 processor + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + else + _LT_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp' + fi + ;; + chorus*) + case $cc_basename in + cxch68*) + # Green Hills C++ Compiler + # _LT_TAGVAR(lt_prog_compiler_static, $1)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a" + ;; + esac + ;; + mingw* | cygwin* | os2* | pw32* | cegcc*) + # This hack is so that the source file can tell whether it is being + # built for inclusion in a dll (and should export symbols for example). + m4_if([$1], [GCJ], [], + [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT']) + ;; + dgux*) + case $cc_basename in + ec++*) + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + ;; + ghcx*) + # Green Hills C++ Compiler + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic' + ;; + *) + ;; + esac + ;; + freebsd* | dragonfly*) + # FreeBSD uses GNU C++ + ;; + hpux9* | hpux10* | hpux11*) + case $cc_basename in + CC*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive' + if test "$host_cpu" != ia64; then + _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z' + fi + ;; + aCC*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive' + case $host_cpu in + hppa*64*|ia64*) + # +Z the default + ;; + *) + _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z' + ;; + esac + ;; + *) + ;; + esac + ;; + interix*) + # This is c89, which is MS Visual C++ (no shared libs) + # Anyone wants to do a port? + ;; + irix5* | irix6* | nonstopux*) + case $cc_basename in + CC*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' + # CC pic flag -KPIC is the default. + ;; + *) + ;; + esac + ;; + linux* | k*bsd*-gnu | kopensolaris*-gnu) + case $cc_basename in + KCC*) + # KAI C++ Compiler + _LT_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + ;; + ecpc* ) + # old Intel C++ for x86_64 which still supported -KPIC. + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' + ;; + icpc* ) + # Intel C++, used to be incompatible with GCC. + # ICC 10 doesn't accept -KPIC any more. + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' + ;; + pgCC* | pgcpp*) + # Portland Group C++ compiler + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + cxx*) + # Compaq C++ + # Make sure the PIC flag is empty. It appears that all Alpha + # Linux and Compaq Tru64 Unix objects are PIC. + _LT_TAGVAR(lt_prog_compiler_pic, $1)= + _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' + ;; + xlc* | xlC* | bgxl[[cC]]* | mpixl[[cC]]*) + # IBM XL 8.0, 9.0 on PPC and BlueGene + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-qpic' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-qstaticlink' + ;; + *) + case `$CC -V 2>&1 | sed 5q` in + *Sun\ C*) + # Sun C++ 5.9 + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' + ;; + esac + ;; + esac + ;; + lynxos*) + ;; + m88k*) + ;; + mvs*) + case $cc_basename in + cxx*) + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-W c,exportall' + ;; + *) + ;; + esac + ;; + netbsd* | netbsdelf*-gnu) + ;; + *qnx* | *nto*) + # QNX uses GNU C++, but need to define -shared option too, otherwise + # it will coredump. + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared' + ;; + osf3* | osf4* | osf5*) + case $cc_basename in + KCC*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,' + ;; + RCC*) + # Rational C++ 2.4.1 + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic' + ;; + cxx*) + # Digital/Compaq C++ + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + # Make sure the PIC flag is empty. It appears that all Alpha + # Linux and Compaq Tru64 Unix objects are PIC. + _LT_TAGVAR(lt_prog_compiler_pic, $1)= + _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' + ;; + *) + ;; + esac + ;; + psos*) + ;; + solaris*) + case $cc_basename in + CC* | sunCC*) + # Sun C++ 4.2, 5.x and Centerline C++ + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' + ;; + gcx*) + # Green Hills C++ Compiler + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC' + ;; + *) + ;; + esac + ;; + sunos4*) + case $cc_basename in + CC*) + # Sun C++ 4.x + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + lcc*) + # Lucid + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic' + ;; + *) + ;; + esac + ;; + sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) + case $cc_basename in + CC*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + esac + ;; + tandem*) + case $cc_basename in + NCC*) + # NonStop-UX NCC 3.20 + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + ;; + *) + ;; + esac + ;; + vxworks*) + ;; + *) + _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no + ;; + esac + fi +], +[ + if test "$GCC" = yes; then + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' + + case $host_os in + aix*) + # All AIX code is PIC. + if test "$host_cpu" = ia64; then + # AIX 5 now supports IA64 processor + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + fi + ;; + + amigaos*) + case $host_cpu in + powerpc) + # see comment about AmigaOS4 .so support + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + ;; + m68k) + # FIXME: we need at least 68020 code to build shared libraries, but + # adding the `-m68020' flag to GCC prevents building anything better, + # like `-m68040'. + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4' + ;; + esac + ;; + + beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) + # PIC is the default for these OSes. + ;; + + mingw* | cygwin* | pw32* | os2* | cegcc*) + # This hack is so that the source file can tell whether it is being + # built for inclusion in a dll (and should export symbols for example). + # Although the cygwin gcc ignores -fPIC, still need this for old-style + # (--disable-auto-import) libraries + m4_if([$1], [GCJ], [], + [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT']) + ;; + + darwin* | rhapsody*) + # PIC is the default on this platform + # Common symbols not allowed in MH_DYLIB files + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common' + ;; + + haiku*) + # PIC is the default for Haiku. + # The "-static" flag exists, but is broken. + _LT_TAGVAR(lt_prog_compiler_static, $1)= + ;; + + hpux*) + # PIC is the default for 64-bit PA HP-UX, but not for 32-bit + # PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag + # sets the default TLS model and affects inlining. + case $host_cpu in + hppa*64*) + # +Z the default + ;; + *) + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + ;; + esac + ;; + + interix[[3-9]]*) + # Interix 3.x gcc -fpic/-fPIC options generate broken code. + # Instead, we relocate shared libraries at runtime. + ;; + + msdosdjgpp*) + # Just because we use GCC doesn't mean we suddenly get shared libraries + # on systems that don't support them. + _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no + enable_shared=no + ;; + + *nto* | *qnx*) + # QNX uses GNU C++, but need to define -shared option too, otherwise + # it will coredump. + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared' + ;; + + sysv4*MP*) + if test -d /usr/nec; then + _LT_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic + fi + ;; + + *) + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + ;; + esac + + case $cc_basename in + nvcc*) # Cuda Compiler Driver 2.2 + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Xlinker ' + if test -n "$_LT_TAGVAR(lt_prog_compiler_pic, $1)"; then + _LT_TAGVAR(lt_prog_compiler_pic, $1)="-Xcompiler $_LT_TAGVAR(lt_prog_compiler_pic, $1)" + fi + ;; + esac + else + # PORTME Check for flag to pass linker flags through the system compiler. + case $host_os in + aix*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + if test "$host_cpu" = ia64; then + # AIX 5 now supports IA64 processor + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + else + _LT_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp' + fi + ;; + + mingw* | cygwin* | pw32* | os2* | cegcc*) + # This hack is so that the source file can tell whether it is being + # built for inclusion in a dll (and should export symbols for example). + m4_if([$1], [GCJ], [], + [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT']) + ;; + + hpux9* | hpux10* | hpux11*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but + # not for PA HP-UX. + case $host_cpu in + hppa*64*|ia64*) + # +Z the default + ;; + *) + _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z' + ;; + esac + # Is there a better lt_prog_compiler_static that works with the bundled CC? + _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive' + ;; + + irix5* | irix6* | nonstopux*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + # PIC (with -KPIC) is the default. + _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' + ;; + + linux* | k*bsd*-gnu | kopensolaris*-gnu) + case $cc_basename in + # old Intel for x86_64 which still supported -KPIC. + ecc*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' + ;; + # icc used to be incompatible with GCC. + # ICC 10 doesn't accept -KPIC any more. + icc* | ifort*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' + ;; + # Lahey Fortran 8.1. + lf95*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='--shared' + _LT_TAGVAR(lt_prog_compiler_static, $1)='--static' + ;; + nagfor*) + # NAG Fortran compiler + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,-Wl,,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*) + # Portland Group compilers (*not* the Pentium gcc compiler, + # which looks to be a dead project) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + ccc*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + # All Alpha code is PIC. + _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' + ;; + xl* | bgxl* | bgf* | mpixl*) + # IBM XL C 8.0/Fortran 10.1, 11.1 on PPC and BlueGene + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-qpic' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-qstaticlink' + ;; + *) + case `$CC -V 2>&1 | sed 5q` in + *Sun\ Ceres\ Fortran* | *Sun*Fortran*\ [[1-7]].* | *Sun*Fortran*\ 8.[[0-3]]*) + # Sun Fortran 8.3 passes all unrecognized flags to the linker + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + _LT_TAGVAR(lt_prog_compiler_wl, $1)='' + ;; + *Sun\ F* | *Sun*Fortran*) + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' + ;; + *Sun\ C*) + # Sun C 5.9 + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + ;; + *Intel*\ [[CF]]*Compiler*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-static' + ;; + *Portland\ Group*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + esac + ;; + esac + ;; + + newsos6) + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + + *nto* | *qnx*) + # QNX uses GNU C++, but need to define -shared option too, otherwise + # it will coredump. + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared' + ;; + + osf3* | osf4* | osf5*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + # All OSF/1 code is PIC. + _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' + ;; + + rdos*) + _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' + ;; + + solaris*) + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + case $cc_basename in + f77* | f90* | f95* | sunf77* | sunf90* | sunf95*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ';; + *) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,';; + esac + ;; + + sunos4*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + + sysv4 | sysv4.2uw2* | sysv4.3*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + + sysv4*MP*) + if test -d /usr/nec ;then + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-Kconform_pic' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + fi + ;; + + sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + + unicos*) + _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no + ;; + + uts4*) + _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic' + _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + + *) + _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no + ;; + esac + fi +]) +case $host_os in + # For platforms which do not support PIC, -DPIC is meaningless: + *djgpp*) + _LT_TAGVAR(lt_prog_compiler_pic, $1)= + ;; + *) + _LT_TAGVAR(lt_prog_compiler_pic, $1)="$_LT_TAGVAR(lt_prog_compiler_pic, $1)@&t@m4_if([$1],[],[ -DPIC],[m4_if([$1],[CXX],[ -DPIC],[])])" + ;; +esac + +AC_CACHE_CHECK([for $compiler option to produce PIC], + [_LT_TAGVAR(lt_cv_prog_compiler_pic, $1)], + [_LT_TAGVAR(lt_cv_prog_compiler_pic, $1)=$_LT_TAGVAR(lt_prog_compiler_pic, $1)]) +_LT_TAGVAR(lt_prog_compiler_pic, $1)=$_LT_TAGVAR(lt_cv_prog_compiler_pic, $1) + +# +# Check to make sure the PIC flag actually works. +# +if test -n "$_LT_TAGVAR(lt_prog_compiler_pic, $1)"; then + _LT_COMPILER_OPTION([if $compiler PIC flag $_LT_TAGVAR(lt_prog_compiler_pic, $1) works], + [_LT_TAGVAR(lt_cv_prog_compiler_pic_works, $1)], + [$_LT_TAGVAR(lt_prog_compiler_pic, $1)@&t@m4_if([$1],[],[ -DPIC],[m4_if([$1],[CXX],[ -DPIC],[])])], [], + [case $_LT_TAGVAR(lt_prog_compiler_pic, $1) in + "" | " "*) ;; + *) _LT_TAGVAR(lt_prog_compiler_pic, $1)=" $_LT_TAGVAR(lt_prog_compiler_pic, $1)" ;; + esac], + [_LT_TAGVAR(lt_prog_compiler_pic, $1)= + _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no]) +fi +_LT_TAGDECL([pic_flag], [lt_prog_compiler_pic], [1], + [Additional compiler flags for building library objects]) + +_LT_TAGDECL([wl], [lt_prog_compiler_wl], [1], + [How to pass a linker flag through the compiler]) +# +# Check to make sure the static flag actually works. +# +wl=$_LT_TAGVAR(lt_prog_compiler_wl, $1) eval lt_tmp_static_flag=\"$_LT_TAGVAR(lt_prog_compiler_static, $1)\" +_LT_LINKER_OPTION([if $compiler static flag $lt_tmp_static_flag works], + _LT_TAGVAR(lt_cv_prog_compiler_static_works, $1), + $lt_tmp_static_flag, + [], + [_LT_TAGVAR(lt_prog_compiler_static, $1)=]) +_LT_TAGDECL([link_static_flag], [lt_prog_compiler_static], [1], + [Compiler flag to prevent dynamic linking]) +])# _LT_COMPILER_PIC + + +# _LT_LINKER_SHLIBS([TAGNAME]) +# ---------------------------- +# See if the linker supports building shared libraries. +m4_defun([_LT_LINKER_SHLIBS], +[AC_REQUIRE([LT_PATH_LD])dnl +AC_REQUIRE([LT_PATH_NM])dnl +m4_require([_LT_PATH_MANIFEST_TOOL])dnl +m4_require([_LT_FILEUTILS_DEFAULTS])dnl +m4_require([_LT_DECL_EGREP])dnl +m4_require([_LT_DECL_SED])dnl +m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl +m4_require([_LT_TAG_COMPILER])dnl +AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries]) +m4_if([$1], [CXX], [ + _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' + _LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'] + case $host_os in + aix[[4-9]]*) + # If we're using GNU nm, then we don't want the "-C" option. + # -C means demangle to AIX nm, but means don't demangle with GNU nm + # Also, AIX nm treats weak defined symbols like other global defined + # symbols, whereas GNU nm marks them as "W". + if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then + _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' + else + _LT_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' + fi + ;; + pw32*) + _LT_TAGVAR(export_symbols_cmds, $1)="$ltdll_cmds" + ;; + cygwin* | mingw* | cegcc*) + case $cc_basename in + cl*) + _LT_TAGVAR(exclude_expsyms, $1)='_NULL_IMPORT_DESCRIPTOR|_IMPORT_DESCRIPTOR_.*' + ;; + *) + _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.* //'\'' | sort | uniq > $export_symbols' + _LT_TAGVAR(exclude_expsyms, $1)=['[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname'] + ;; + esac + ;; + linux* | k*bsd*-gnu | gnu*) + _LT_TAGVAR(link_all_deplibs, $1)=no + ;; + *) + _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' + ;; + esac +], [ + runpath_var= + _LT_TAGVAR(allow_undefined_flag, $1)= + _LT_TAGVAR(always_export_symbols, $1)=no + _LT_TAGVAR(archive_cmds, $1)= + _LT_TAGVAR(archive_expsym_cmds, $1)= + _LT_TAGVAR(compiler_needs_object, $1)=no + _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no + _LT_TAGVAR(export_dynamic_flag_spec, $1)= + _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' + _LT_TAGVAR(hardcode_automatic, $1)=no + _LT_TAGVAR(hardcode_direct, $1)=no + _LT_TAGVAR(hardcode_direct_absolute, $1)=no + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)= + _LT_TAGVAR(hardcode_libdir_separator, $1)= + _LT_TAGVAR(hardcode_minus_L, $1)=no + _LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported + _LT_TAGVAR(inherit_rpath, $1)=no + _LT_TAGVAR(link_all_deplibs, $1)=unknown + _LT_TAGVAR(module_cmds, $1)= + _LT_TAGVAR(module_expsym_cmds, $1)= + _LT_TAGVAR(old_archive_from_new_cmds, $1)= + _LT_TAGVAR(old_archive_from_expsyms_cmds, $1)= + _LT_TAGVAR(thread_safe_flag_spec, $1)= + _LT_TAGVAR(whole_archive_flag_spec, $1)= + # include_expsyms should be a list of space-separated symbols to be *always* + # included in the symbol list + _LT_TAGVAR(include_expsyms, $1)= + # exclude_expsyms can be an extended regexp of symbols to exclude + # it will be wrapped by ` (' and `)$', so one must not match beginning or + # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc', + # as well as any symbol that contains `d'. + _LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'] + # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out + # platforms (ab)use it in PIC code, but their linkers get confused if + # the symbol is explicitly referenced. Since portable code cannot + # rely on this symbol name, it's probably fine to never include it in + # preloaded symbol tables. + # Exclude shared library initialization/finalization symbols. +dnl Note also adjust exclude_expsyms for C++ above. + extract_expsyms_cmds= + + case $host_os in + cygwin* | mingw* | pw32* | cegcc*) + # FIXME: the MSVC++ port hasn't been tested in a loooong time + # When not using gcc, we currently assume that we are using + # Microsoft Visual C++. + if test "$GCC" != yes; then + with_gnu_ld=no + fi + ;; + interix*) + # we just hope/assume this is gcc and not c89 (= MSVC++) + with_gnu_ld=yes + ;; + openbsd*) + with_gnu_ld=no + ;; + linux* | k*bsd*-gnu | gnu*) + _LT_TAGVAR(link_all_deplibs, $1)=no + ;; + esac + + _LT_TAGVAR(ld_shlibs, $1)=yes + + # On some targets, GNU ld is compatible enough with the native linker + # that we're better off using the native interface for both. + lt_use_gnu_ld_interface=no + if test "$with_gnu_ld" = yes; then + case $host_os in + aix*) + # The AIX port of GNU ld has always aspired to compatibility + # with the native linker. However, as the warning in the GNU ld + # block says, versions before 2.19.5* couldn't really create working + # shared libraries, regardless of the interface used. + case `$LD -v 2>&1` in + *\ \(GNU\ Binutils\)\ 2.19.5*) ;; + *\ \(GNU\ Binutils\)\ 2.[[2-9]]*) ;; + *\ \(GNU\ Binutils\)\ [[3-9]]*) ;; + *) + lt_use_gnu_ld_interface=yes + ;; + esac + ;; + *) + lt_use_gnu_ld_interface=yes + ;; + esac + fi + + if test "$lt_use_gnu_ld_interface" = yes; then + # If archive_cmds runs LD, not CC, wlarc should be empty + wlarc='${wl}' + + # Set some defaults for GNU ld with shared library support. These + # are reset later if shared libraries are not supported. Putting them + # here allows them to be overridden if necessary. + runpath_var=LD_RUN_PATH + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' + # ancient GNU ld didn't support --whole-archive et. al. + if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then + _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' + else + _LT_TAGVAR(whole_archive_flag_spec, $1)= + fi + supports_anon_versioning=no + case `$LD -v 2>&1` in + *GNU\ gold*) supports_anon_versioning=yes ;; + *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.10.*) ;; # catch versions < 2.11 + *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... + *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ... + *\ 2.11.*) ;; # other 2.11 versions + *) supports_anon_versioning=yes ;; + esac + + # See if GNU ld supports shared libraries. + case $host_os in + aix[[3-9]]*) + # On AIX/PPC, the GNU linker is very broken + if test "$host_cpu" != ia64; then + _LT_TAGVAR(ld_shlibs, $1)=no + cat <<_LT_EOF 1>&2 + +*** Warning: the GNU linker, at least up to release 2.19, is reported +*** to be unable to reliably create shared libraries on AIX. +*** Therefore, libtool is disabling shared libraries support. If you +*** really care for shared libraries, you may want to install binutils +*** 2.20 or above, or modify your PATH so that a non-GNU linker is found. +*** You will then need to restart the configuration process. + +_LT_EOF + fi + ;; + + amigaos*) + case $host_cpu in + powerpc) + # see comment about AmigaOS4 .so support + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='' + ;; + m68k) + _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_TAGVAR(hardcode_minus_L, $1)=yes + ;; + esac + ;; + + beos*) + if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then + _LT_TAGVAR(allow_undefined_flag, $1)=unsupported + # Joseph Beckenbach says some releases of gcc + # support --undefined. This deserves some investigation. FIXME + _LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + else + _LT_TAGVAR(ld_shlibs, $1)=no + fi + ;; + + cygwin* | mingw* | pw32* | cegcc*) + # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless, + # as there is no search path for DLLs. + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-all-symbols' + _LT_TAGVAR(allow_undefined_flag, $1)=unsupported + _LT_TAGVAR(always_export_symbols, $1)=no + _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes + _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.* //'\'' | sort | uniq > $export_symbols' + _LT_TAGVAR(exclude_expsyms, $1)=['[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname'] + + if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' + # If the export-symbols file already is a .def file (1st line + # is EXPORTS), use it as is; otherwise, prepend... + _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then + cp $export_symbols $output_objdir/$soname.def; + else + echo EXPORTS > $output_objdir/$soname.def; + cat $export_symbols >> $output_objdir/$soname.def; + fi~ + $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' + else + _LT_TAGVAR(ld_shlibs, $1)=no + fi + ;; + + haiku*) + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_TAGVAR(link_all_deplibs, $1)=yes + ;; + + interix[[3-9]]*) + _LT_TAGVAR(hardcode_direct, $1)=no + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' + # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. + # Instead, shared libraries are loaded at an image base (0x10000000 by + # default) and relocated if they conflict, which is a slow very memory + # consuming and fragmenting process. To avoid this, we pick a random, + # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link + # time. Moving up from 0x10000000 also allows more sbrk(2) space. + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' + ;; + + gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu) + tmp_diet=no + if test "$host_os" = linux-dietlibc; then + case $cc_basename in + diet\ *) tmp_diet=yes;; # linux-dietlibc with static linking (!diet-dyn) + esac + fi + if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \ + && test "$tmp_diet" = no + then + tmp_addflag=' $pic_flag' + tmp_sharedflag='-shared' + case $cc_basename,$host_cpu in + pgcc*) # Portland Group C compiler + _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' + tmp_addflag=' $pic_flag' + ;; + pgf77* | pgf90* | pgf95* | pgfortran*) + # Portland Group f77 and f90 compilers + _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' + tmp_addflag=' $pic_flag -Mnomain' ;; + ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64 + tmp_addflag=' -i_dynamic' ;; + efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64 + tmp_addflag=' -i_dynamic -nofor_main' ;; + ifc* | ifort*) # Intel Fortran compiler + tmp_addflag=' -nofor_main' ;; + lf95*) # Lahey Fortran 8.1 + _LT_TAGVAR(whole_archive_flag_spec, $1)= + tmp_sharedflag='--shared' ;; + xl[[cC]]* | bgxl[[cC]]* | mpixl[[cC]]*) # IBM XL C 8.0 on PPC (deal with xlf below) + tmp_sharedflag='-qmkshrobj' + tmp_addflag= ;; + nvcc*) # Cuda Compiler Driver 2.2 + _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' + _LT_TAGVAR(compiler_needs_object, $1)=yes + ;; + esac + case `$CC -V 2>&1 | sed 5q` in + *Sun\ C*) # Sun C 5.9 + _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' + _LT_TAGVAR(compiler_needs_object, $1)=yes + tmp_sharedflag='-G' ;; + *Sun\ F*) # Sun Fortran 8.3 + tmp_sharedflag='-G' ;; + esac + _LT_TAGVAR(archive_cmds, $1)='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + + if test "x$supports_anon_versioning" = xyes; then + _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~ + cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ + echo "local: *; };" >> $output_objdir/$libname.ver~ + $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' + fi + + case $cc_basename in + xlf* | bgf* | bgxlf* | mpixlf*) + # IBM XL Fortran 10.1 on PPC cannot create shared libs itself + _LT_TAGVAR(whole_archive_flag_spec, $1)='--whole-archive$convenience --no-whole-archive' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + _LT_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $linker_flags -soname $soname -o $lib' + if test "x$supports_anon_versioning" = xyes; then + _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~ + cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ + echo "local: *; };" >> $output_objdir/$libname.ver~ + $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib' + fi + ;; + esac + else + _LT_TAGVAR(ld_shlibs, $1)=no + fi + ;; + + netbsd* | netbsdelf*-gnu) + if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then + _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' + wlarc= + else + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + fi + ;; + + solaris*) + if $LD -v 2>&1 | $GREP 'BFD 2\.8' > /dev/null; then + _LT_TAGVAR(ld_shlibs, $1)=no + cat <<_LT_EOF 1>&2 + +*** Warning: The releases 2.8.* of the GNU linker cannot reliably +*** create shared libraries on Solaris systems. Therefore, libtool +*** is disabling shared libraries support. We urge you to upgrade GNU +*** binutils to release 2.9.1 or newer. Another option is to modify +*** your PATH or compiler configuration so that the native linker is +*** used, and then restart. + +_LT_EOF + elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + else + _LT_TAGVAR(ld_shlibs, $1)=no + fi + ;; + + sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*) + case `$LD -v 2>&1` in + *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.1[[0-5]].*) + _LT_TAGVAR(ld_shlibs, $1)=no + cat <<_LT_EOF 1>&2 + +*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not +*** reliably create shared libraries on SCO systems. Therefore, libtool +*** is disabling shared libraries support. We urge you to upgrade GNU +*** binutils to release 2.16.91.0.3 or newer. Another option is to modify +*** your PATH or compiler configuration so that the native linker is +*** used, and then restart. + +_LT_EOF + ;; + *) + # For security reasons, it is highly recommended that you always + # use absolute paths for naming shared libraries, and exclude the + # DT_RUNPATH tag from executables and libraries. But doing so + # requires that you compile everything twice, which is a pain. + if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + else + _LT_TAGVAR(ld_shlibs, $1)=no + fi + ;; + esac + ;; + + sunos4*) + _LT_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' + wlarc= + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + *) + if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + else + _LT_TAGVAR(ld_shlibs, $1)=no + fi + ;; + esac + + if test "$_LT_TAGVAR(ld_shlibs, $1)" = no; then + runpath_var= + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)= + _LT_TAGVAR(export_dynamic_flag_spec, $1)= + _LT_TAGVAR(whole_archive_flag_spec, $1)= + fi + else + # PORTME fill in a description of your system's linker (not GNU ld) + case $host_os in + aix3*) + _LT_TAGVAR(allow_undefined_flag, $1)=unsupported + _LT_TAGVAR(always_export_symbols, $1)=yes + _LT_TAGVAR(archive_expsym_cmds, $1)='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname' + # Note: this linker hardcodes the directories in LIBPATH if there + # are no directories specified by -L. + _LT_TAGVAR(hardcode_minus_L, $1)=yes + if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then + # Neither direct hardcoding nor static linking is supported with a + # broken collect2. + _LT_TAGVAR(hardcode_direct, $1)=unsupported + fi + ;; + + aix[[4-9]]*) + if test "$host_cpu" = ia64; then + # On IA64, the linker does run time linking by default, so we don't + # have to do anything special. + aix_use_runtimelinking=no + exp_sym_flag='-Bexport' + no_entry_flag="" + else + # If we're using GNU nm, then we don't want the "-C" option. + # -C means demangle to AIX nm, but means don't demangle with GNU nm + # Also, AIX nm treats weak defined symbols like other global + # defined symbols, whereas GNU nm marks them as "W". + if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then + _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' + else + _LT_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' + fi + aix_use_runtimelinking=no + + # Test if we are trying to use run time linking or normal + # AIX style linking. If -brtl is somewhere in LDFLAGS, we + # need to do runtime linking. + case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*) + for ld_flag in $LDFLAGS; do + if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then + aix_use_runtimelinking=yes + break + fi + done + ;; + esac + + exp_sym_flag='-bexport' + no_entry_flag='-bnoentry' + fi + + # When large executables or shared objects are built, AIX ld can + # have problems creating the table of contents. If linking a library + # or program results in "error TOC overflow" add -mminimal-toc to + # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not + # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. + + _LT_TAGVAR(archive_cmds, $1)='' + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_direct_absolute, $1)=yes + _LT_TAGVAR(hardcode_libdir_separator, $1)=':' + _LT_TAGVAR(link_all_deplibs, $1)=yes + _LT_TAGVAR(file_list_spec, $1)='${wl}-f,' + + if test "$GCC" = yes; then + case $host_os in aix4.[[012]]|aix4.[[012]].*) + # We only want to do this on AIX 4.2 and lower, the check + # below for broken collect2 doesn't work under 4.3+ + collect2name=`${CC} -print-prog-name=collect2` + if test -f "$collect2name" && + strings "$collect2name" | $GREP resolve_lib_name >/dev/null + then + # We have reworked collect2 + : + else + # We have old collect2 + _LT_TAGVAR(hardcode_direct, $1)=unsupported + # It fails to find uninstalled libraries when the uninstalled + # path is not listed in the libpath. Setting hardcode_minus_L + # to unsupported forces relinking + _LT_TAGVAR(hardcode_minus_L, $1)=yes + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)= + fi + ;; + esac + shared_flag='-shared' + if test "$aix_use_runtimelinking" = yes; then + shared_flag="$shared_flag "'${wl}-G' + fi + _LT_TAGVAR(link_all_deplibs, $1)=no + else + # not using gcc + if test "$host_cpu" = ia64; then + # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release + # chokes on -Wl,-G. The following line is correct: + shared_flag='-G' + else + if test "$aix_use_runtimelinking" = yes; then + shared_flag='${wl}-G' + else + shared_flag='${wl}-bM:SRE' + fi + fi + fi + + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-bexpall' + # It seems that -bexpall does not export symbols beginning with + # underscore (_), so it is better to generate a list of symbols to export. + _LT_TAGVAR(always_export_symbols, $1)=yes + if test "$aix_use_runtimelinking" = yes; then + # Warning - without using the other runtime loading flags (-brtl), + # -berok will link without error, but may produce a broken library. + _LT_TAGVAR(allow_undefined_flag, $1)='-berok' + # Determine the default libpath from the value encoded in an + # empty executable. + _LT_SYS_MODULE_PATH_AIX([$1]) + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" + else + if test "$host_cpu" = ia64; then + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib' + _LT_TAGVAR(allow_undefined_flag, $1)="-z nodefs" + _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" + else + # Determine the default libpath from the value encoded in an + # empty executable. + _LT_SYS_MODULE_PATH_AIX([$1]) + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" + # Warning - without using the other run time loading flags, + # -berok will link without error, but may produce a broken library. + _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok' + _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok' + if test "$with_gnu_ld" = yes; then + # We only use this code for GNU lds that support --whole-archive. + _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive' + else + # Exported symbols can be pulled into shared objects from archives + _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience' + fi + _LT_TAGVAR(archive_cmds_need_lc, $1)=yes + # This is similar to how AIX traditionally builds its shared libraries. + _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' + fi + fi + ;; + + amigaos*) + case $host_cpu in + powerpc) + # see comment about AmigaOS4 .so support + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='' + ;; + m68k) + _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_TAGVAR(hardcode_minus_L, $1)=yes + ;; + esac + ;; + + bsdi[[45]]*) + _LT_TAGVAR(export_dynamic_flag_spec, $1)=-rdynamic + ;; + + cygwin* | mingw* | pw32* | cegcc*) + # When not using gcc, we currently assume that we are using + # Microsoft Visual C++. + # hardcode_libdir_flag_spec is actually meaningless, as there is + # no search path for DLLs. + case $cc_basename in + cl*) + # Native MSVC + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' ' + _LT_TAGVAR(allow_undefined_flag, $1)=unsupported + _LT_TAGVAR(always_export_symbols, $1)=yes + _LT_TAGVAR(file_list_spec, $1)='@' + # Tell ltmain to make .lib files, not .a files. + libext=lib + # Tell ltmain to make .dll files, not .so files. + shrext_cmds=".dll" + # FIXME: Setting linknames here is a bad hack. + _LT_TAGVAR(archive_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames=' + _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then + sed -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp; + else + sed -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp; + fi~ + $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~ + linknames=' + # The linker will not automatically build a static lib if we build a DLL. + # _LT_TAGVAR(old_archive_from_new_cmds, $1)='true' + _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes + _LT_TAGVAR(exclude_expsyms, $1)='_NULL_IMPORT_DESCRIPTOR|_IMPORT_DESCRIPTOR_.*' + _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1,DATA/'\'' | $SED -e '\''/^[[AITW]][[ ]]/s/.*[[ ]]//'\'' | sort | uniq > $export_symbols' + # Don't use ranlib + _LT_TAGVAR(old_postinstall_cmds, $1)='chmod 644 $oldlib' + _LT_TAGVAR(postlink_cmds, $1)='lt_outputfile="@OUTPUT@"~ + lt_tool_outputfile="@TOOL_OUTPUT@"~ + case $lt_outputfile in + *.exe|*.EXE) ;; + *) + lt_outputfile="$lt_outputfile.exe" + lt_tool_outputfile="$lt_tool_outputfile.exe" + ;; + esac~ + if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then + $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1; + $RM "$lt_outputfile.manifest"; + fi' + ;; + *) + # Assume MSVC wrapper + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' ' + _LT_TAGVAR(allow_undefined_flag, $1)=unsupported + # Tell ltmain to make .lib files, not .a files. + libext=lib + # Tell ltmain to make .dll files, not .so files. + shrext_cmds=".dll" + # FIXME: Setting linknames here is a bad hack. + _LT_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames=' + # The linker will automatically build a .lib file if we build a DLL. + _LT_TAGVAR(old_archive_from_new_cmds, $1)='true' + # FIXME: Should let the user specify the lib program. + _LT_TAGVAR(old_archive_cmds, $1)='lib -OUT:$oldlib$oldobjs$old_deplibs' + _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes + ;; + esac + ;; + + darwin* | rhapsody*) + _LT_DARWIN_LINKER_FEATURES($1) + ;; + + dgux*) + _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor + # support. Future versions do this automatically, but an explicit c++rt0.o + # does not break anything, and helps significantly (at the cost of a little + # extra space). + freebsd2.2*) + _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + # Unfortunately, older versions of FreeBSD 2 do not have this feature. + freebsd2.*) + _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_minus_L, $1)=yes + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + # FreeBSD 3 and greater uses gcc -shared to do shared libraries. + freebsd* | dragonfly*) + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + hpux9*) + if test "$GCC" = yes; then + _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + else + _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + fi + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)=: + _LT_TAGVAR(hardcode_direct, $1)=yes + + # hardcode_minus_L: Not really in the search PATH, + # but as the default location of the library. + _LT_TAGVAR(hardcode_minus_L, $1)=yes + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' + ;; + + hpux10*) + if test "$GCC" = yes && test "$with_gnu_ld" = no; then + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' + else + _LT_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' + fi + if test "$with_gnu_ld" = no; then + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)=: + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_direct_absolute, $1)=yes + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' + # hardcode_minus_L: Not really in the search PATH, + # but as the default location of the library. + _LT_TAGVAR(hardcode_minus_L, $1)=yes + fi + ;; + + hpux11*) + if test "$GCC" = yes && test "$with_gnu_ld" = no; then + case $host_cpu in + hppa*64*) + _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + ;; + ia64*) + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' + ;; + *) + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' + ;; + esac + else + case $host_cpu in + hppa*64*) + _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + ;; + ia64*) + _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' + ;; + *) + m4_if($1, [], [ + # Older versions of the 11.00 compiler do not understand -b yet + # (HP92453-01 A.11.01.20 doesn't, HP92453-01 B.11.X.35175-35176.GP does) + _LT_LINKER_OPTION([if $CC understands -b], + _LT_TAGVAR(lt_cv_prog_compiler__b, $1), [-b], + [_LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'], + [_LT_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'])], + [_LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags']) + ;; + esac + fi + if test "$with_gnu_ld" = no; then + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)=: + + case $host_cpu in + hppa*64*|ia64*) + _LT_TAGVAR(hardcode_direct, $1)=no + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + *) + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_direct_absolute, $1)=yes + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' + + # hardcode_minus_L: Not really in the search PATH, + # but as the default location of the library. + _LT_TAGVAR(hardcode_minus_L, $1)=yes + ;; + esac + fi + ;; + + irix5* | irix6* | nonstopux*) + if test "$GCC" = yes; then + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + # Try to use the -exported_symbol ld option, if it does not + # work, assume that -exports_file does not work either and + # implicitly export all symbols. + # This should be the same for all languages, so no per-tag cache variable. + AC_CACHE_CHECK([whether the $host_os linker accepts -exported_symbol], + [lt_cv_irix_exported_symbol], + [save_LDFLAGS="$LDFLAGS" + LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null" + AC_LINK_IFELSE( + [AC_LANG_SOURCE( + [AC_LANG_CASE([C], [[int foo (void) { return 0; }]], + [C++], [[int foo (void) { return 0; }]], + [Fortran 77], [[ + subroutine foo + end]], + [Fortran], [[ + subroutine foo + end]])])], + [lt_cv_irix_exported_symbol=yes], + [lt_cv_irix_exported_symbol=no]) + LDFLAGS="$save_LDFLAGS"]) + if test "$lt_cv_irix_exported_symbol" = yes; then + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib' + fi + else + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib' + fi + _LT_TAGVAR(archive_cmds_need_lc, $1)='no' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)=: + _LT_TAGVAR(inherit_rpath, $1)=yes + _LT_TAGVAR(link_all_deplibs, $1)=yes + ;; + + netbsd* | netbsdelf*-gnu) + if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then + _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out + else + _LT_TAGVAR(archive_cmds, $1)='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF + fi + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + newsos6) + _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)=: + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + *nto* | *qnx*) + ;; + + openbsd*) + if test -f /usr/libexec/ld.so; then + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + _LT_TAGVAR(hardcode_direct_absolute, $1)=yes + if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' + else + case $host_os in + openbsd[[01]].* | openbsd2.[[0-7]] | openbsd2.[[0-7]].*) + _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' + ;; + *) + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' + ;; + esac + fi + else + _LT_TAGVAR(ld_shlibs, $1)=no + fi + ;; + + os2*) + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_TAGVAR(hardcode_minus_L, $1)=yes + _LT_TAGVAR(allow_undefined_flag, $1)=unsupported + _LT_TAGVAR(archive_cmds, $1)='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~echo DATA >> $output_objdir/$libname.def~echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' + _LT_TAGVAR(old_archive_from_new_cmds, $1)='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def' + ;; + + osf3*) + if test "$GCC" = yes; then + _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + else + _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' + fi + _LT_TAGVAR(archive_cmds_need_lc, $1)='no' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)=: + ;; + + osf4* | osf5*) # as osf3* with the addition of -msym flag + if test "$GCC" = yes; then + _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $pic_flag $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + else + _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~ + $CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp' + + # Both c and cxx compiler support -rpath directly + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' + fi + _LT_TAGVAR(archive_cmds_need_lc, $1)='no' + _LT_TAGVAR(hardcode_libdir_separator, $1)=: + ;; + + solaris*) + _LT_TAGVAR(no_undefined_flag, $1)=' -z defs' + if test "$GCC" = yes; then + wlarc='${wl}' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ + $CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' + else + case `$CC -V 2>&1` in + *"Compilers 5.0"*) + wlarc='' + _LT_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ + $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp' + ;; + *) + wlarc='${wl}' + _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ + $CC -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' + ;; + esac + fi + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + case $host_os in + solaris2.[[0-5]] | solaris2.[[0-5]].*) ;; + *) + # The compiler driver will combine and reorder linker options, + # but understands `-z linker_flag'. GCC discards it without `$wl', + # but is careful enough not to reorder. + # Supported since Solaris 2.6 (maybe 2.5.1?) + if test "$GCC" = yes; then + _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' + else + _LT_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract' + fi + ;; + esac + _LT_TAGVAR(link_all_deplibs, $1)=yes + ;; + + sunos4*) + if test "x$host_vendor" = xsequent; then + # Use $CC to link under sequent, because it throws in some extra .o + # files that make .init and .fini sections work. + _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags' + else + _LT_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' + fi + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_minus_L, $1)=yes + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + sysv4) + case $host_vendor in + sni) + _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_TAGVAR(hardcode_direct, $1)=yes # is this really true??? + ;; + siemens) + ## LD is ld it makes a PLAMLIB + ## CC just makes a GrossModule. + _LT_TAGVAR(archive_cmds, $1)='$LD -G -o $lib $libobjs $deplibs $linker_flags' + _LT_TAGVAR(reload_cmds, $1)='$CC -r -o $output$reload_objs' + _LT_TAGVAR(hardcode_direct, $1)=no + ;; + motorola) + _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_TAGVAR(hardcode_direct, $1)=no #Motorola manual says yes, but my tests say they lie + ;; + esac + runpath_var='LD_RUN_PATH' + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + sysv4.3*) + _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + _LT_TAGVAR(export_dynamic_flag_spec, $1)='-Bexport' + ;; + + sysv4*MP*) + if test -d /usr/nec; then + _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + runpath_var=LD_RUN_PATH + hardcode_runpath_var=yes + _LT_TAGVAR(ld_shlibs, $1)=yes + fi + ;; + + sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*) + _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text' + _LT_TAGVAR(archive_cmds_need_lc, $1)=no + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + runpath_var='LD_RUN_PATH' + + if test "$GCC" = yes; then + _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + else + _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + fi + ;; + + sysv5* | sco3.2v5* | sco5v6*) + # Note: We can NOT use -z defs as we might desire, because we do not + # link with -lc, and that would cause any symbols used from libc to + # always be unresolved, which means just about no library would + # ever link correctly. If we're not using GNU ld we use -z text + # though, which does catch some bad symbols but isn't as heavy-handed + # as -z defs. + _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text' + _LT_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs' + _LT_TAGVAR(archive_cmds_need_lc, $1)=no + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R,$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)=':' + _LT_TAGVAR(link_all_deplibs, $1)=yes + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport' + runpath_var='LD_RUN_PATH' + + if test "$GCC" = yes; then + _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + else + _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + fi + ;; + + uts4*) + _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + *) + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + esac + + if test x$host_vendor = xsni; then + case $host in + sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Blargedynsym' + ;; + esac + fi + fi +]) +AC_MSG_RESULT([$_LT_TAGVAR(ld_shlibs, $1)]) +test "$_LT_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no + +_LT_TAGVAR(with_gnu_ld, $1)=$with_gnu_ld + +_LT_DECL([], [libext], [0], [Old archive suffix (normally "a")])dnl +_LT_DECL([], [shrext_cmds], [1], [Shared library suffix (normally ".so")])dnl +_LT_DECL([], [extract_expsyms_cmds], [2], + [The commands to extract the exported symbol list from a shared archive]) + +# +# Do we need to explicitly link libc? +# +case "x$_LT_TAGVAR(archive_cmds_need_lc, $1)" in +x|xyes) + # Assume -lc should be added + _LT_TAGVAR(archive_cmds_need_lc, $1)=yes + + if test "$enable_shared" = yes && test "$GCC" = yes; then + case $_LT_TAGVAR(archive_cmds, $1) in + *'~'*) + # FIXME: we may have to deal with multi-command sequences. + ;; + '$CC '*) + # Test whether the compiler implicitly links with -lc since on some + # systems, -lgcc has to come before -lc. If gcc already passes -lc + # to ld, don't add -lc before -lgcc. + AC_CACHE_CHECK([whether -lc should be explicitly linked in], + [lt_cv_]_LT_TAGVAR(archive_cmds_need_lc, $1), + [$RM conftest* + echo "$lt_simple_compile_test_code" > conftest.$ac_ext + + if AC_TRY_EVAL(ac_compile) 2>conftest.err; then + soname=conftest + lib=conftest + libobjs=conftest.$ac_objext + deplibs= + wl=$_LT_TAGVAR(lt_prog_compiler_wl, $1) + pic_flag=$_LT_TAGVAR(lt_prog_compiler_pic, $1) + compiler_flags=-v + linker_flags=-v + verstring= + output_objdir=. + libname=conftest + lt_save_allow_undefined_flag=$_LT_TAGVAR(allow_undefined_flag, $1) + _LT_TAGVAR(allow_undefined_flag, $1)= + if AC_TRY_EVAL(_LT_TAGVAR(archive_cmds, $1) 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) + then + lt_cv_[]_LT_TAGVAR(archive_cmds_need_lc, $1)=no + else + lt_cv_[]_LT_TAGVAR(archive_cmds_need_lc, $1)=yes + fi + _LT_TAGVAR(allow_undefined_flag, $1)=$lt_save_allow_undefined_flag + else + cat conftest.err 1>&5 + fi + $RM conftest* + ]) + _LT_TAGVAR(archive_cmds_need_lc, $1)=$lt_cv_[]_LT_TAGVAR(archive_cmds_need_lc, $1) + ;; + esac + fi + ;; +esac + +_LT_TAGDECL([build_libtool_need_lc], [archive_cmds_need_lc], [0], + [Whether or not to add -lc for building shared libraries]) +_LT_TAGDECL([allow_libtool_libs_with_static_runtimes], + [enable_shared_with_static_runtimes], [0], + [Whether or not to disallow shared libs when runtime libs are static]) +_LT_TAGDECL([], [export_dynamic_flag_spec], [1], + [Compiler flag to allow reflexive dlopens]) +_LT_TAGDECL([], [whole_archive_flag_spec], [1], + [Compiler flag to generate shared objects directly from archives]) +_LT_TAGDECL([], [compiler_needs_object], [1], + [Whether the compiler copes with passing no objects directly]) +_LT_TAGDECL([], [old_archive_from_new_cmds], [2], + [Create an old-style archive from a shared archive]) +_LT_TAGDECL([], [old_archive_from_expsyms_cmds], [2], + [Create a temporary old-style archive to link instead of a shared archive]) +_LT_TAGDECL([], [archive_cmds], [2], [Commands used to build a shared archive]) +_LT_TAGDECL([], [archive_expsym_cmds], [2]) +_LT_TAGDECL([], [module_cmds], [2], + [Commands used to build a loadable module if different from building + a shared archive.]) +_LT_TAGDECL([], [module_expsym_cmds], [2]) +_LT_TAGDECL([], [with_gnu_ld], [1], + [Whether we are building with GNU ld or not]) +_LT_TAGDECL([], [allow_undefined_flag], [1], + [Flag that allows shared libraries with undefined symbols to be built]) +_LT_TAGDECL([], [no_undefined_flag], [1], + [Flag that enforces no undefined symbols]) +_LT_TAGDECL([], [hardcode_libdir_flag_spec], [1], + [Flag to hardcode $libdir into a binary during linking. + This must work even if $libdir does not exist]) +_LT_TAGDECL([], [hardcode_libdir_separator], [1], + [Whether we need a single "-rpath" flag with a separated argument]) +_LT_TAGDECL([], [hardcode_direct], [0], + [Set to "yes" if using DIR/libNAME${shared_ext} during linking hardcodes + DIR into the resulting binary]) +_LT_TAGDECL([], [hardcode_direct_absolute], [0], + [Set to "yes" if using DIR/libNAME${shared_ext} during linking hardcodes + DIR into the resulting binary and the resulting library dependency is + "absolute", i.e impossible to change by setting ${shlibpath_var} if the + library is relocated]) +_LT_TAGDECL([], [hardcode_minus_L], [0], + [Set to "yes" if using the -LDIR flag during linking hardcodes DIR + into the resulting binary]) +_LT_TAGDECL([], [hardcode_shlibpath_var], [0], + [Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR + into the resulting binary]) +_LT_TAGDECL([], [hardcode_automatic], [0], + [Set to "yes" if building a shared library automatically hardcodes DIR + into the library and all subsequent libraries and executables linked + against it]) +_LT_TAGDECL([], [inherit_rpath], [0], + [Set to yes if linker adds runtime paths of dependent libraries + to runtime path list]) +_LT_TAGDECL([], [link_all_deplibs], [0], + [Whether libtool must link a program against all its dependency libraries]) +_LT_TAGDECL([], [always_export_symbols], [0], + [Set to "yes" if exported symbols are required]) +_LT_TAGDECL([], [export_symbols_cmds], [2], + [The commands to list exported symbols]) +_LT_TAGDECL([], [exclude_expsyms], [1], + [Symbols that should not be listed in the preloaded symbols]) +_LT_TAGDECL([], [include_expsyms], [1], + [Symbols that must always be exported]) +_LT_TAGDECL([], [prelink_cmds], [2], + [Commands necessary for linking programs (against libraries) with templates]) +_LT_TAGDECL([], [postlink_cmds], [2], + [Commands necessary for finishing linking programs]) +_LT_TAGDECL([], [file_list_spec], [1], + [Specify filename containing input files]) +dnl FIXME: Not yet implemented +dnl _LT_TAGDECL([], [thread_safe_flag_spec], [1], +dnl [Compiler flag to generate thread safe objects]) +])# _LT_LINKER_SHLIBS + + +# _LT_LANG_C_CONFIG([TAG]) +# ------------------------ +# Ensure that the configuration variables for a C compiler are suitably +# defined. These variables are subsequently used by _LT_CONFIG to write +# the compiler configuration to `libtool'. +m4_defun([_LT_LANG_C_CONFIG], +[m4_require([_LT_DECL_EGREP])dnl +lt_save_CC="$CC" +AC_LANG_PUSH(C) + +# Source file extension for C test sources. +ac_ext=c + +# Object file extension for compiled C test sources. +objext=o +_LT_TAGVAR(objext, $1)=$objext + +# Code to be used in simple compile tests +lt_simple_compile_test_code="int some_variable = 0;" + +# Code to be used in simple link tests +lt_simple_link_test_code='int main(){return(0);}' + +_LT_TAG_COMPILER +# Save the default compiler, since it gets overwritten when the other +# tags are being tested, and _LT_TAGVAR(compiler, []) is a NOP. +compiler_DEFAULT=$CC + +# save warnings/boilerplate of simple test code +_LT_COMPILER_BOILERPLATE +_LT_LINKER_BOILERPLATE + +## CAVEAT EMPTOR: +## There is no encapsulation within the following macros, do not change +## the running order or otherwise move them around unless you know exactly +## what you are doing... +if test -n "$compiler"; then + _LT_COMPILER_NO_RTTI($1) + _LT_COMPILER_PIC($1) + _LT_COMPILER_C_O($1) + _LT_COMPILER_FILE_LOCKS($1) + _LT_LINKER_SHLIBS($1) + _LT_SYS_DYNAMIC_LINKER($1) + _LT_LINKER_HARDCODE_LIBPATH($1) + LT_SYS_DLOPEN_SELF + _LT_CMD_STRIPLIB + + # Report which library types will actually be built + AC_MSG_CHECKING([if libtool supports shared libraries]) + AC_MSG_RESULT([$can_build_shared]) + + AC_MSG_CHECKING([whether to build shared libraries]) + test "$can_build_shared" = "no" && enable_shared=no + + # On AIX, shared libraries and static libraries use the same namespace, and + # are all built from PIC. + case $host_os in + aix3*) + test "$enable_shared" = yes && enable_static=no + if test -n "$RANLIB"; then + archive_cmds="$archive_cmds~\$RANLIB \$lib" + postinstall_cmds='$RANLIB $lib' + fi + ;; + + aix[[4-9]]*) + if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then + test "$enable_shared" = yes && enable_static=no + fi + ;; + esac + AC_MSG_RESULT([$enable_shared]) + + AC_MSG_CHECKING([whether to build static libraries]) + # Make sure either enable_shared or enable_static is yes. + test "$enable_shared" = yes || enable_static=yes + AC_MSG_RESULT([$enable_static]) + + _LT_CONFIG($1) +fi +AC_LANG_POP +CC="$lt_save_CC" +])# _LT_LANG_C_CONFIG + + +# _LT_LANG_CXX_CONFIG([TAG]) +# -------------------------- +# Ensure that the configuration variables for a C++ compiler are suitably +# defined. These variables are subsequently used by _LT_CONFIG to write +# the compiler configuration to `libtool'. +m4_defun([_LT_LANG_CXX_CONFIG], +[m4_require([_LT_FILEUTILS_DEFAULTS])dnl +m4_require([_LT_DECL_EGREP])dnl +m4_require([_LT_PATH_MANIFEST_TOOL])dnl +if test -n "$CXX" && ( test "X$CXX" != "Xno" && + ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) || + (test "X$CXX" != "Xg++"))) ; then + AC_PROG_CXXCPP +else + _lt_caught_CXX_error=yes +fi + +AC_LANG_PUSH(C++) +_LT_TAGVAR(archive_cmds_need_lc, $1)=no +_LT_TAGVAR(allow_undefined_flag, $1)= +_LT_TAGVAR(always_export_symbols, $1)=no +_LT_TAGVAR(archive_expsym_cmds, $1)= +_LT_TAGVAR(compiler_needs_object, $1)=no +_LT_TAGVAR(export_dynamic_flag_spec, $1)= +_LT_TAGVAR(hardcode_direct, $1)=no +_LT_TAGVAR(hardcode_direct_absolute, $1)=no +_LT_TAGVAR(hardcode_libdir_flag_spec, $1)= +_LT_TAGVAR(hardcode_libdir_separator, $1)= +_LT_TAGVAR(hardcode_minus_L, $1)=no +_LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported +_LT_TAGVAR(hardcode_automatic, $1)=no +_LT_TAGVAR(inherit_rpath, $1)=no +_LT_TAGVAR(module_cmds, $1)= +_LT_TAGVAR(module_expsym_cmds, $1)= +_LT_TAGVAR(link_all_deplibs, $1)=unknown +_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds +_LT_TAGVAR(reload_flag, $1)=$reload_flag +_LT_TAGVAR(reload_cmds, $1)=$reload_cmds +_LT_TAGVAR(no_undefined_flag, $1)= +_LT_TAGVAR(whole_archive_flag_spec, $1)= +_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no + +# Source file extension for C++ test sources. +ac_ext=cpp + +# Object file extension for compiled C++ test sources. +objext=o +_LT_TAGVAR(objext, $1)=$objext + +# No sense in running all these tests if we already determined that +# the CXX compiler isn't working. Some variables (like enable_shared) +# are currently assumed to apply to all compilers on this platform, +# and will be corrupted by setting them based on a non-working compiler. +if test "$_lt_caught_CXX_error" != yes; then + # Code to be used in simple compile tests + lt_simple_compile_test_code="int some_variable = 0;" + + # Code to be used in simple link tests + lt_simple_link_test_code='int main(int, char *[[]]) { return(0); }' + + # ltmain only uses $CC for tagged configurations so make sure $CC is set. + _LT_TAG_COMPILER + + # save warnings/boilerplate of simple test code + _LT_COMPILER_BOILERPLATE + _LT_LINKER_BOILERPLATE + + # Allow CC to be a program name with arguments. + lt_save_CC=$CC + lt_save_CFLAGS=$CFLAGS + lt_save_LD=$LD + lt_save_GCC=$GCC + GCC=$GXX + lt_save_with_gnu_ld=$with_gnu_ld + lt_save_path_LD=$lt_cv_path_LD + if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then + lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx + else + $as_unset lt_cv_prog_gnu_ld + fi + if test -n "${lt_cv_path_LDCXX+set}"; then + lt_cv_path_LD=$lt_cv_path_LDCXX + else + $as_unset lt_cv_path_LD + fi + test -z "${LDCXX+set}" || LD=$LDCXX + CC=${CXX-"c++"} + CFLAGS=$CXXFLAGS + compiler=$CC + _LT_TAGVAR(compiler, $1)=$CC + _LT_CC_BASENAME([$compiler]) + + if test -n "$compiler"; then + # We don't want -fno-exception when compiling C++ code, so set the + # no_builtin_flag separately + if test "$GXX" = yes; then + _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin' + else + _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)= + fi + + if test "$GXX" = yes; then + # Set up default GNU C++ configuration + + LT_PATH_LD + + # Check if GNU C++ uses GNU ld as the underlying linker, since the + # archiving commands below assume that GNU ld is being used. + if test "$with_gnu_ld" = yes; then + _LT_TAGVAR(archive_cmds, $1)='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' + + # If archive_cmds runs LD, not CC, wlarc should be empty + # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to + # investigate it a little bit more. (MM) + wlarc='${wl}' + + # ancient GNU ld didn't support --whole-archive et. al. + if eval "`$CC -print-prog-name=ld` --help 2>&1" | + $GREP 'no-whole-archive' > /dev/null; then + _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' + else + _LT_TAGVAR(whole_archive_flag_spec, $1)= + fi + else + with_gnu_ld=no + wlarc= + + # A generic and very simple default shared library creation + # command for GNU C++ for the case where it uses the native + # linker, instead of GNU ld. If possible, this setting should + # overridden to take advantage of the native linker features on + # the platform it is being used on. + _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' + fi + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"' + + else + GXX=no + with_gnu_ld=no + wlarc= + fi + + # PORTME: fill in a description of your system's C++ link characteristics + AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries]) + _LT_TAGVAR(ld_shlibs, $1)=yes + case $host_os in + aix3*) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + aix[[4-9]]*) + if test "$host_cpu" = ia64; then + # On IA64, the linker does run time linking by default, so we don't + # have to do anything special. + aix_use_runtimelinking=no + exp_sym_flag='-Bexport' + no_entry_flag="" + else + aix_use_runtimelinking=no + + # Test if we are trying to use run time linking or normal + # AIX style linking. If -brtl is somewhere in LDFLAGS, we + # need to do runtime linking. + case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*) + for ld_flag in $LDFLAGS; do + case $ld_flag in + *-brtl*) + aix_use_runtimelinking=yes + break + ;; + esac + done + ;; + esac + + exp_sym_flag='-bexport' + no_entry_flag='-bnoentry' + fi + + # When large executables or shared objects are built, AIX ld can + # have problems creating the table of contents. If linking a library + # or program results in "error TOC overflow" add -mminimal-toc to + # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not + # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. + + _LT_TAGVAR(archive_cmds, $1)='' + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_direct_absolute, $1)=yes + _LT_TAGVAR(hardcode_libdir_separator, $1)=':' + _LT_TAGVAR(link_all_deplibs, $1)=yes + _LT_TAGVAR(file_list_spec, $1)='${wl}-f,' + + if test "$GXX" = yes; then + case $host_os in aix4.[[012]]|aix4.[[012]].*) + # We only want to do this on AIX 4.2 and lower, the check + # below for broken collect2 doesn't work under 4.3+ + collect2name=`${CC} -print-prog-name=collect2` + if test -f "$collect2name" && + strings "$collect2name" | $GREP resolve_lib_name >/dev/null + then + # We have reworked collect2 + : + else + # We have old collect2 + _LT_TAGVAR(hardcode_direct, $1)=unsupported + # It fails to find uninstalled libraries when the uninstalled + # path is not listed in the libpath. Setting hardcode_minus_L + # to unsupported forces relinking + _LT_TAGVAR(hardcode_minus_L, $1)=yes + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)= + fi + esac + shared_flag='-shared' + if test "$aix_use_runtimelinking" = yes; then + shared_flag="$shared_flag "'${wl}-G' + fi + else + # not using gcc + if test "$host_cpu" = ia64; then + # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release + # chokes on -Wl,-G. The following line is correct: + shared_flag='-G' + else + if test "$aix_use_runtimelinking" = yes; then + shared_flag='${wl}-G' + else + shared_flag='${wl}-bM:SRE' + fi + fi + fi + + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-bexpall' + # It seems that -bexpall does not export symbols beginning with + # underscore (_), so it is better to generate a list of symbols to + # export. + _LT_TAGVAR(always_export_symbols, $1)=yes + if test "$aix_use_runtimelinking" = yes; then + # Warning - without using the other runtime loading flags (-brtl), + # -berok will link without error, but may produce a broken library. + _LT_TAGVAR(allow_undefined_flag, $1)='-berok' + # Determine the default libpath from the value encoded in an empty + # executable. + _LT_SYS_MODULE_PATH_AIX([$1]) + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" + + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" + else + if test "$host_cpu" = ia64; then + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib' + _LT_TAGVAR(allow_undefined_flag, $1)="-z nodefs" + _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" + else + # Determine the default libpath from the value encoded in an + # empty executable. + _LT_SYS_MODULE_PATH_AIX([$1]) + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" + # Warning - without using the other run time loading flags, + # -berok will link without error, but may produce a broken library. + _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok' + _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok' + if test "$with_gnu_ld" = yes; then + # We only use this code for GNU lds that support --whole-archive. + _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive' + else + # Exported symbols can be pulled into shared objects from archives + _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience' + fi + _LT_TAGVAR(archive_cmds_need_lc, $1)=yes + # This is similar to how AIX traditionally builds its shared + # libraries. + _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' + fi + fi + ;; + + beos*) + if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then + _LT_TAGVAR(allow_undefined_flag, $1)=unsupported + # Joseph Beckenbach says some releases of gcc + # support --undefined. This deserves some investigation. FIXME + _LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + else + _LT_TAGVAR(ld_shlibs, $1)=no + fi + ;; + + chorus*) + case $cc_basename in + *) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + esac + ;; + + cygwin* | mingw* | pw32* | cegcc*) + case $GXX,$cc_basename in + ,cl* | no,cl*) + # Native MSVC + # hardcode_libdir_flag_spec is actually meaningless, as there is + # no search path for DLLs. + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' ' + _LT_TAGVAR(allow_undefined_flag, $1)=unsupported + _LT_TAGVAR(always_export_symbols, $1)=yes + _LT_TAGVAR(file_list_spec, $1)='@' + # Tell ltmain to make .lib files, not .a files. + libext=lib + # Tell ltmain to make .dll files, not .so files. + shrext_cmds=".dll" + # FIXME: Setting linknames here is a bad hack. + _LT_TAGVAR(archive_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames=' + _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then + $SED -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp; + else + $SED -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp; + fi~ + $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~ + linknames=' + # The linker will not automatically build a static lib if we build a DLL. + # _LT_TAGVAR(old_archive_from_new_cmds, $1)='true' + _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes + # Don't use ranlib + _LT_TAGVAR(old_postinstall_cmds, $1)='chmod 644 $oldlib' + _LT_TAGVAR(postlink_cmds, $1)='lt_outputfile="@OUTPUT@"~ + lt_tool_outputfile="@TOOL_OUTPUT@"~ + case $lt_outputfile in + *.exe|*.EXE) ;; + *) + lt_outputfile="$lt_outputfile.exe" + lt_tool_outputfile="$lt_tool_outputfile.exe" + ;; + esac~ + func_to_tool_file "$lt_outputfile"~ + if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then + $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1; + $RM "$lt_outputfile.manifest"; + fi' + ;; + *) + # g++ + # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless, + # as there is no search path for DLLs. + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-all-symbols' + _LT_TAGVAR(allow_undefined_flag, $1)=unsupported + _LT_TAGVAR(always_export_symbols, $1)=no + _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes + + if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then + _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' + # If the export-symbols file already is a .def file (1st line + # is EXPORTS), use it as is; otherwise, prepend... + _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then + cp $export_symbols $output_objdir/$soname.def; + else + echo EXPORTS > $output_objdir/$soname.def; + cat $export_symbols >> $output_objdir/$soname.def; + fi~ + $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' + else + _LT_TAGVAR(ld_shlibs, $1)=no + fi + ;; + esac + ;; + darwin* | rhapsody*) + _LT_DARWIN_LINKER_FEATURES($1) + ;; + + dgux*) + case $cc_basename in + ec++*) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + ghcx*) + # Green Hills C++ Compiler + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + *) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + esac + ;; + + freebsd2.*) + # C++ shared libraries reported to be fairly broken before + # switch to ELF + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + + freebsd-elf*) + _LT_TAGVAR(archive_cmds_need_lc, $1)=no + ;; + + freebsd* | dragonfly*) + # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF + # conventions + _LT_TAGVAR(ld_shlibs, $1)=yes + ;; + + gnu*) + ;; + + haiku*) + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_TAGVAR(link_all_deplibs, $1)=yes + ;; + + hpux9*) + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)=: + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH, + # but as the default + # location of the library. + + case $cc_basename in + CC*) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + aCC*) + _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + # + # There doesn't appear to be a way to prevent this compiler from + # explicitly linking system object files so we need to strip them + # from the output so that they don't get included in the library + # dependencies. + output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $EGREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"' + ;; + *) + if test "$GXX" = yes; then + _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared -nostdlib $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + else + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + fi + ;; + esac + ;; + + hpux10*|hpux11*) + if test $with_gnu_ld = no; then + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)=: + + case $host_cpu in + hppa*64*|ia64*) + ;; + *) + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' + ;; + esac + fi + case $host_cpu in + hppa*64*|ia64*) + _LT_TAGVAR(hardcode_direct, $1)=no + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + *) + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_direct_absolute, $1)=yes + _LT_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH, + # but as the default + # location of the library. + ;; + esac + + case $cc_basename in + CC*) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + aCC*) + case $host_cpu in + hppa*64*) + _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + ;; + ia64*) + _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + ;; + *) + _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + ;; + esac + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + # + # There doesn't appear to be a way to prevent this compiler from + # explicitly linking system object files so we need to strip them + # from the output so that they don't get included in the library + # dependencies. + output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $GREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"' + ;; + *) + if test "$GXX" = yes; then + if test $with_gnu_ld = no; then + case $host_cpu in + hppa*64*) + _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + ;; + ia64*) + _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + ;; + *) + _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + ;; + esac + fi + else + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + fi + ;; + esac + ;; + + interix[[3-9]]*) + _LT_TAGVAR(hardcode_direct, $1)=no + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' + # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. + # Instead, shared libraries are loaded at an image base (0x10000000 by + # default) and relocated if they conflict, which is a slow very memory + # consuming and fragmenting process. To avoid this, we pick a random, + # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link + # time. Moving up from 0x10000000 also allows more sbrk(2) space. + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' + ;; + irix5* | irix6*) + case $cc_basename in + CC*) + # SGI C++ + _LT_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' + + # Archives containing C++ object files must be created using + # "CC -ar", where "CC" is the IRIX C++ compiler. This is + # necessary to make sure instantiated templates are included + # in the archive. + _LT_TAGVAR(old_archive_cmds, $1)='$CC -ar -WR,-u -o $oldlib $oldobjs' + ;; + *) + if test "$GXX" = yes; then + if test "$with_gnu_ld" = no; then + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + else + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` -o $lib' + fi + fi + _LT_TAGVAR(link_all_deplibs, $1)=yes + ;; + esac + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)=: + _LT_TAGVAR(inherit_rpath, $1)=yes + ;; + + linux* | k*bsd*-gnu | kopensolaris*-gnu) + case $cc_basename in + KCC*) + # Kuck and Associates, Inc. (KAI) C++ Compiler + + # KCC will only create a shared library if the output file + # ends with ".so" (or ".sl" for HP-UX), so rename the library + # to its proper name (with version) after linking. + _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib' + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + # + # There doesn't appear to be a way to prevent this compiler from + # explicitly linking system object files so we need to strip them + # from the output so that they don't get included in the library + # dependencies. + output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | $GREP "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"' + + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' + + # Archives containing C++ object files must be created using + # "CC -Bstatic", where "CC" is the KAI C++ compiler. + _LT_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs' + ;; + icpc* | ecpc* ) + # Intel C++ + with_gnu_ld=yes + # version 8.0 and above of icpc choke on multiply defined symbols + # if we add $predep_objects and $postdep_objects, however 7.1 and + # earlier do not add the objects themselves. + case `$CC -V 2>&1` in + *"Version 7."*) + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + ;; + *) # Version 8.0 or newer + tmp_idyn= + case $host_cpu in + ia64*) tmp_idyn=' -i_dynamic';; + esac + _LT_TAGVAR(archive_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + ;; + esac + _LT_TAGVAR(archive_cmds_need_lc, $1)=no + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' + _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive' + ;; + pgCC* | pgcpp*) + # Portland Group C++ compiler + case `$CC -V` in + *pgCC\ [[1-5]].* | *pgcpp\ [[1-5]].*) + _LT_TAGVAR(prelink_cmds, $1)='tpldir=Template.dir~ + rm -rf $tpldir~ + $CC --prelink_objects --instantiation_dir $tpldir $objs $libobjs $compile_deplibs~ + compile_command="$compile_command `find $tpldir -name \*.o | sort | $NL2SP`"' + _LT_TAGVAR(old_archive_cmds, $1)='tpldir=Template.dir~ + rm -rf $tpldir~ + $CC --prelink_objects --instantiation_dir $tpldir $oldobjs$old_deplibs~ + $AR $AR_FLAGS $oldlib$oldobjs$old_deplibs `find $tpldir -name \*.o | sort | $NL2SP`~ + $RANLIB $oldlib' + _LT_TAGVAR(archive_cmds, $1)='tpldir=Template.dir~ + rm -rf $tpldir~ + $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~ + $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='tpldir=Template.dir~ + rm -rf $tpldir~ + $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~ + $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib' + ;; + *) # Version 6 and above use weak symbols + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib' + ;; + esac + + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' + _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' + ;; + cxx*) + # Compaq C++ + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib ${wl}-retain-symbols-file $wl$export_symbols' + + runpath_var=LD_RUN_PATH + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)=: + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + # + # There doesn't appear to be a way to prevent this compiler from + # explicitly linking system object files so we need to strip them + # from the output so that they don't get included in the library + # dependencies. + output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "X$list" | $Xsed' + ;; + xl* | mpixl* | bgxl*) + # IBM XL 8.0 on PPC, with GNU ld + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' + _LT_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + if test "x$supports_anon_versioning" = xyes; then + _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~ + cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ + echo "local: *; };" >> $output_objdir/$libname.ver~ + $CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' + fi + ;; + *) + case `$CC -V 2>&1 | sed 5q` in + *Sun\ C*) + # Sun C++ 5.9 + _LT_TAGVAR(no_undefined_flag, $1)=' -zdefs' + _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file ${wl}$export_symbols' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' + _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive' + _LT_TAGVAR(compiler_needs_object, $1)=yes + + # Not sure whether something based on + # $CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 + # would be better. + output_verbose_link_cmd='func_echo_all' + + # Archives containing C++ object files must be created using + # "CC -xar", where "CC" is the Sun C++ compiler. This is + # necessary to make sure instantiated templates are included + # in the archive. + _LT_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs' + ;; + esac + ;; + esac + ;; + + lynxos*) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + + m88k*) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + + mvs*) + case $cc_basename in + cxx*) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + *) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + esac + ;; + + netbsd*) + if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then + _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags' + wlarc= + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + fi + # Workaround some broken pre-1.5 toolchains + output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"' + ;; + + *nto* | *qnx*) + _LT_TAGVAR(ld_shlibs, $1)=yes + ;; + + openbsd2*) + # C++ shared libraries are fairly broken + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + + openbsd*) + if test -f /usr/libexec/ld.so; then + _LT_TAGVAR(hardcode_direct, $1)=yes + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + _LT_TAGVAR(hardcode_direct_absolute, $1)=yes + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' + if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib' + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' + _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' + fi + output_verbose_link_cmd=func_echo_all + else + _LT_TAGVAR(ld_shlibs, $1)=no + fi + ;; + + osf3* | osf4* | osf5*) + case $cc_basename in + KCC*) + # Kuck and Associates, Inc. (KAI) C++ Compiler + + # KCC will only create a shared library if the output file + # ends with ".so" (or ".sl" for HP-UX), so rename the library + # to its proper name (with version) after linking. + _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo "$lib" | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' + + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)=: + + # Archives containing C++ object files must be created using + # the KAI C++ compiler. + case $host in + osf3*) _LT_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs' ;; + *) _LT_TAGVAR(old_archive_cmds, $1)='$CC -o $oldlib $oldobjs' ;; + esac + ;; + RCC*) + # Rational C++ 2.4.1 + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + cxx*) + case $host in + osf3*) + _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && func_echo_all "${wl}-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + ;; + *) + _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' + _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~ + echo "-hidden">> $lib.exp~ + $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname ${wl}-input ${wl}$lib.exp `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~ + $RM $lib.exp' + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' + ;; + esac + + _LT_TAGVAR(hardcode_libdir_separator, $1)=: + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + # + # There doesn't appear to be a way to prevent this compiler from + # explicitly linking system object files so we need to strip them + # from the output so that they don't get included in the library + # dependencies. + output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld" | $GREP -v "ld:"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"' + ;; + *) + if test "$GXX" = yes && test "$with_gnu_ld" = no; then + _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' + case $host in + osf3*) + _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + ;; + *) + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + ;; + esac + + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)=: + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"' + + else + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + fi + ;; + esac + ;; + + psos*) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + + sunos4*) + case $cc_basename in + CC*) + # Sun C++ 4.x + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + lcc*) + # Lucid + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + *) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + esac + ;; + + solaris*) + case $cc_basename in + CC* | sunCC*) + # Sun C++ 4.2, 5.x and Centerline C++ + _LT_TAGVAR(archive_cmds_need_lc,$1)=yes + _LT_TAGVAR(no_undefined_flag, $1)=' -zdefs' + _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ + $CC -G${allow_undefined_flag} ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp' + + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + case $host_os in + solaris2.[[0-5]] | solaris2.[[0-5]].*) ;; + *) + # The compiler driver will combine and reorder linker options, + # but understands `-z linker_flag'. + # Supported since Solaris 2.6 (maybe 2.5.1?) + _LT_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract' + ;; + esac + _LT_TAGVAR(link_all_deplibs, $1)=yes + + output_verbose_link_cmd='func_echo_all' + + # Archives containing C++ object files must be created using + # "CC -xar", where "CC" is the Sun C++ compiler. This is + # necessary to make sure instantiated templates are included + # in the archive. + _LT_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs' + ;; + gcx*) + # Green Hills C++ Compiler + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' + + # The C++ compiler must be used to create the archive. + _LT_TAGVAR(old_archive_cmds, $1)='$CC $LDFLAGS -archive -o $oldlib $oldobjs' + ;; + *) + # GNU C++ compiler with Solaris linker + if test "$GXX" = yes && test "$with_gnu_ld" = no; then + _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-z ${wl}defs' + if $CC --version | $GREP -v '^2\.7' > /dev/null; then + _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ + $CC -shared $pic_flag -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp' + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"' + else + # g++ 2.7 appears to require `-G' NOT `-shared' on this + # platform. + _LT_TAGVAR(archive_cmds, $1)='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' + _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ + $CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp' + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + output_verbose_link_cmd='$CC -G $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"' + fi + + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $wl$libdir' + case $host_os in + solaris2.[[0-5]] | solaris2.[[0-5]].*) ;; + *) + _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' + ;; + esac + fi + ;; + esac + ;; + + sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*) + _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text' + _LT_TAGVAR(archive_cmds_need_lc, $1)=no + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + runpath_var='LD_RUN_PATH' + + case $cc_basename in + CC*) + _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + ;; + *) + _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + ;; + esac + ;; + + sysv5* | sco3.2v5* | sco5v6*) + # Note: We can NOT use -z defs as we might desire, because we do not + # link with -lc, and that would cause any symbols used from libc to + # always be unresolved, which means just about no library would + # ever link correctly. If we're not using GNU ld we use -z text + # though, which does catch some bad symbols but isn't as heavy-handed + # as -z defs. + _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text' + _LT_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs' + _LT_TAGVAR(archive_cmds_need_lc, $1)=no + _LT_TAGVAR(hardcode_shlibpath_var, $1)=no + _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R,$libdir' + _LT_TAGVAR(hardcode_libdir_separator, $1)=':' + _LT_TAGVAR(link_all_deplibs, $1)=yes + _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport' + runpath_var='LD_RUN_PATH' + + case $cc_basename in + CC*) + _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(old_archive_cmds, $1)='$CC -Tprelink_objects $oldobjs~ + '"$_LT_TAGVAR(old_archive_cmds, $1)" + _LT_TAGVAR(reload_cmds, $1)='$CC -Tprelink_objects $reload_objs~ + '"$_LT_TAGVAR(reload_cmds, $1)" + ;; + *) + _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + ;; + esac + ;; + + tandem*) + case $cc_basename in + NCC*) + # NonStop-UX NCC 3.20 + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + *) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + esac + ;; + + vxworks*) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + + *) + # FIXME: insert proper C++ library support + _LT_TAGVAR(ld_shlibs, $1)=no + ;; + esac + + AC_MSG_RESULT([$_LT_TAGVAR(ld_shlibs, $1)]) + test "$_LT_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no + + _LT_TAGVAR(GCC, $1)="$GXX" + _LT_TAGVAR(LD, $1)="$LD" + + ## CAVEAT EMPTOR: + ## There is no encapsulation within the following macros, do not change + ## the running order or otherwise move them around unless you know exactly + ## what you are doing... + _LT_SYS_HIDDEN_LIBDEPS($1) + _LT_COMPILER_PIC($1) + _LT_COMPILER_C_O($1) + _LT_COMPILER_FILE_LOCKS($1) + _LT_LINKER_SHLIBS($1) + _LT_SYS_DYNAMIC_LINKER($1) + _LT_LINKER_HARDCODE_LIBPATH($1) + + _LT_CONFIG($1) + fi # test -n "$compiler" + + CC=$lt_save_CC + CFLAGS=$lt_save_CFLAGS + LDCXX=$LD + LD=$lt_save_LD + GCC=$lt_save_GCC + with_gnu_ld=$lt_save_with_gnu_ld + lt_cv_path_LDCXX=$lt_cv_path_LD + lt_cv_path_LD=$lt_save_path_LD + lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld + lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld +fi # test "$_lt_caught_CXX_error" != yes + +AC_LANG_POP +])# _LT_LANG_CXX_CONFIG + + +# _LT_FUNC_STRIPNAME_CNF +# ---------------------- +# func_stripname_cnf prefix suffix name +# strip PREFIX and SUFFIX off of NAME. +# PREFIX and SUFFIX must not contain globbing or regex special +# characters, hashes, percent signs, but SUFFIX may contain a leading +# dot (in which case that matches only a dot). +# +# This function is identical to the (non-XSI) version of func_stripname, +# except this one can be used by m4 code that may be executed by configure, +# rather than the libtool script. +m4_defun([_LT_FUNC_STRIPNAME_CNF],[dnl +AC_REQUIRE([_LT_DECL_SED]) +AC_REQUIRE([_LT_PROG_ECHO_BACKSLASH]) +func_stripname_cnf () +{ + case ${2} in + .*) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%\\\\${2}\$%%"`;; + *) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%${2}\$%%"`;; + esac +} # func_stripname_cnf +])# _LT_FUNC_STRIPNAME_CNF + +# _LT_SYS_HIDDEN_LIBDEPS([TAGNAME]) +# --------------------------------- +# Figure out "hidden" library dependencies from verbose +# compiler output when linking a shared library. +# Parse the compiler output and extract the necessary +# objects, libraries and library flags. +m4_defun([_LT_SYS_HIDDEN_LIBDEPS], +[m4_require([_LT_FILEUTILS_DEFAULTS])dnl +AC_REQUIRE([_LT_FUNC_STRIPNAME_CNF])dnl +# Dependencies to place before and after the object being linked: +_LT_TAGVAR(predep_objects, $1)= +_LT_TAGVAR(postdep_objects, $1)= +_LT_TAGVAR(predeps, $1)= +_LT_TAGVAR(postdeps, $1)= +_LT_TAGVAR(compiler_lib_search_path, $1)= + +dnl we can't use the lt_simple_compile_test_code here, +dnl because it contains code intended for an executable, +dnl not a library. It's possible we should let each +dnl tag define a new lt_????_link_test_code variable, +dnl but it's only used here... +m4_if([$1], [], [cat > conftest.$ac_ext <<_LT_EOF +int a; +void foo (void) { a = 0; } +_LT_EOF +], [$1], [CXX], [cat > conftest.$ac_ext <<_LT_EOF +class Foo +{ +public: + Foo (void) { a = 0; } +private: + int a; +}; +_LT_EOF +], [$1], [F77], [cat > conftest.$ac_ext <<_LT_EOF + subroutine foo + implicit none + integer*4 a + a=0 + return + end +_LT_EOF +], [$1], [FC], [cat > conftest.$ac_ext <<_LT_EOF + subroutine foo + implicit none + integer a + a=0 + return + end +_LT_EOF +], [$1], [GCJ], [cat > conftest.$ac_ext <<_LT_EOF +public class foo { + private int a; + public void bar (void) { + a = 0; + } +}; +_LT_EOF +], [$1], [GO], [cat > conftest.$ac_ext <<_LT_EOF +package foo +func foo() { +} +_LT_EOF +]) + +_lt_libdeps_save_CFLAGS=$CFLAGS +case "$CC $CFLAGS " in #( +*\ -flto*\ *) CFLAGS="$CFLAGS -fno-lto" ;; +*\ -fwhopr*\ *) CFLAGS="$CFLAGS -fno-whopr" ;; +*\ -fuse-linker-plugin*\ *) CFLAGS="$CFLAGS -fno-use-linker-plugin" ;; +esac + +dnl Parse the compiler output and extract the necessary +dnl objects, libraries and library flags. +if AC_TRY_EVAL(ac_compile); then + # Parse the compiler output and extract the necessary + # objects, libraries and library flags. + + # Sentinel used to keep track of whether or not we are before + # the conftest object file. + pre_test_object_deps_done=no + + for p in `eval "$output_verbose_link_cmd"`; do + case ${prev}${p} in + + -L* | -R* | -l*) + # Some compilers place space between "-{L,R}" and the path. + # Remove the space. + if test $p = "-L" || + test $p = "-R"; then + prev=$p + continue + fi + + # Expand the sysroot to ease extracting the directories later. + if test -z "$prev"; then + case $p in + -L*) func_stripname_cnf '-L' '' "$p"; prev=-L; p=$func_stripname_result ;; + -R*) func_stripname_cnf '-R' '' "$p"; prev=-R; p=$func_stripname_result ;; + -l*) func_stripname_cnf '-l' '' "$p"; prev=-l; p=$func_stripname_result ;; + esac + fi + case $p in + =*) func_stripname_cnf '=' '' "$p"; p=$lt_sysroot$func_stripname_result ;; + esac + if test "$pre_test_object_deps_done" = no; then + case ${prev} in + -L | -R) + # Internal compiler library paths should come after those + # provided the user. The postdeps already come after the + # user supplied libs so there is no need to process them. + if test -z "$_LT_TAGVAR(compiler_lib_search_path, $1)"; then + _LT_TAGVAR(compiler_lib_search_path, $1)="${prev}${p}" + else + _LT_TAGVAR(compiler_lib_search_path, $1)="${_LT_TAGVAR(compiler_lib_search_path, $1)} ${prev}${p}" + fi + ;; + # The "-l" case would never come before the object being + # linked, so don't bother handling this case. + esac + else + if test -z "$_LT_TAGVAR(postdeps, $1)"; then + _LT_TAGVAR(postdeps, $1)="${prev}${p}" + else + _LT_TAGVAR(postdeps, $1)="${_LT_TAGVAR(postdeps, $1)} ${prev}${p}" + fi + fi + prev= + ;; + + *.lto.$objext) ;; # Ignore GCC LTO objects + *.$objext) + # This assumes that the test object file only shows up + # once in the compiler output. + if test "$p" = "conftest.$objext"; then + pre_test_object_deps_done=yes + continue + fi + + if test "$pre_test_object_deps_done" = no; then + if test -z "$_LT_TAGVAR(predep_objects, $1)"; then + _LT_TAGVAR(predep_objects, $1)="$p" + else + _LT_TAGVAR(predep_objects, $1)="$_LT_TAGVAR(predep_objects, $1) $p" + fi + else + if test -z "$_LT_TAGVAR(postdep_objects, $1)"; then + _LT_TAGVAR(postdep_objects, $1)="$p" + else + _LT_TAGVAR(postdep_objects, $1)="$_LT_TAGVAR(postdep_objects, $1) $p" + fi + fi + ;; + + *) ;; # Ignore the rest. + + esac + done + + # Clean up. + rm -f a.out a.exe +else + echo "libtool.m4: error: problem compiling $1 test program" +fi + +$RM -f confest.$objext +CFLAGS=$_lt_libdeps_save_CFLAGS + +# PORTME: override above test on systems where it is broken +m4_if([$1], [CXX], +[case $host_os in +interix[[3-9]]*) + # Interix 3.5 installs completely hosed .la files for C++, so rather than + # hack all around it, let's just trust "g++" to DTRT. + _LT_TAGVAR(predep_objects,$1)= + _LT_TAGVAR(postdep_objects,$1)= + _LT_TAGVAR(postdeps,$1)= + ;; + +linux*) + case `$CC -V 2>&1 | sed 5q` in + *Sun\ C*) + # Sun C++ 5.9 + + # The more standards-conforming stlport4 library is + # incompatible with the Cstd library. Avoid specifying + # it if it's in CXXFLAGS. Ignore libCrun as + # -library=stlport4 depends on it. + case " $CXX $CXXFLAGS " in + *" -library=stlport4 "*) + solaris_use_stlport4=yes + ;; + esac + + if test "$solaris_use_stlport4" != yes; then + _LT_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun' + fi + ;; + esac + ;; + +solaris*) + case $cc_basename in + CC* | sunCC*) + # The more standards-conforming stlport4 library is + # incompatible with the Cstd library. Avoid specifying + # it if it's in CXXFLAGS. Ignore libCrun as + # -library=stlport4 depends on it. + case " $CXX $CXXFLAGS " in + *" -library=stlport4 "*) + solaris_use_stlport4=yes + ;; + esac + + # Adding this requires a known-good setup of shared libraries for + # Sun compiler versions before 5.6, else PIC objects from an old + # archive will be linked into the output, leading to subtle bugs. + if test "$solaris_use_stlport4" != yes; then + _LT_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun' + fi + ;; + esac + ;; +esac +]) + +case " $_LT_TAGVAR(postdeps, $1) " in +*" -lc "*) _LT_TAGVAR(archive_cmds_need_lc, $1)=no ;; +esac + _LT_TAGVAR(compiler_lib_search_dirs, $1)= +if test -n "${_LT_TAGVAR(compiler_lib_search_path, $1)}"; then + _LT_TAGVAR(compiler_lib_search_dirs, $1)=`echo " ${_LT_TAGVAR(compiler_lib_search_path, $1)}" | ${SED} -e 's! -L! !g' -e 's!^ !!'` +fi +_LT_TAGDECL([], [compiler_lib_search_dirs], [1], + [The directories searched by this compiler when creating a shared library]) +_LT_TAGDECL([], [predep_objects], [1], + [Dependencies to place before and after the objects being linked to + create a shared library]) +_LT_TAGDECL([], [postdep_objects], [1]) +_LT_TAGDECL([], [predeps], [1]) +_LT_TAGDECL([], [postdeps], [1]) +_LT_TAGDECL([], [compiler_lib_search_path], [1], + [The library search path used internally by the compiler when linking + a shared library]) +])# _LT_SYS_HIDDEN_LIBDEPS + + +# _LT_LANG_F77_CONFIG([TAG]) +# -------------------------- +# Ensure that the configuration variables for a Fortran 77 compiler are +# suitably defined. These variables are subsequently used by _LT_CONFIG +# to write the compiler configuration to `libtool'. +m4_defun([_LT_LANG_F77_CONFIG], +[AC_LANG_PUSH(Fortran 77) +if test -z "$F77" || test "X$F77" = "Xno"; then + _lt_disable_F77=yes +fi + +_LT_TAGVAR(archive_cmds_need_lc, $1)=no +_LT_TAGVAR(allow_undefined_flag, $1)= +_LT_TAGVAR(always_export_symbols, $1)=no +_LT_TAGVAR(archive_expsym_cmds, $1)= +_LT_TAGVAR(export_dynamic_flag_spec, $1)= +_LT_TAGVAR(hardcode_direct, $1)=no +_LT_TAGVAR(hardcode_direct_absolute, $1)=no +_LT_TAGVAR(hardcode_libdir_flag_spec, $1)= +_LT_TAGVAR(hardcode_libdir_separator, $1)= +_LT_TAGVAR(hardcode_minus_L, $1)=no +_LT_TAGVAR(hardcode_automatic, $1)=no +_LT_TAGVAR(inherit_rpath, $1)=no +_LT_TAGVAR(module_cmds, $1)= +_LT_TAGVAR(module_expsym_cmds, $1)= +_LT_TAGVAR(link_all_deplibs, $1)=unknown +_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds +_LT_TAGVAR(reload_flag, $1)=$reload_flag +_LT_TAGVAR(reload_cmds, $1)=$reload_cmds +_LT_TAGVAR(no_undefined_flag, $1)= +_LT_TAGVAR(whole_archive_flag_spec, $1)= +_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no + +# Source file extension for f77 test sources. +ac_ext=f + +# Object file extension for compiled f77 test sources. +objext=o +_LT_TAGVAR(objext, $1)=$objext + +# No sense in running all these tests if we already determined that +# the F77 compiler isn't working. Some variables (like enable_shared) +# are currently assumed to apply to all compilers on this platform, +# and will be corrupted by setting them based on a non-working compiler. +if test "$_lt_disable_F77" != yes; then + # Code to be used in simple compile tests + lt_simple_compile_test_code="\ + subroutine t + return + end +" + + # Code to be used in simple link tests + lt_simple_link_test_code="\ + program t + end +" + + # ltmain only uses $CC for tagged configurations so make sure $CC is set. + _LT_TAG_COMPILER + + # save warnings/boilerplate of simple test code + _LT_COMPILER_BOILERPLATE + _LT_LINKER_BOILERPLATE + + # Allow CC to be a program name with arguments. + lt_save_CC="$CC" + lt_save_GCC=$GCC + lt_save_CFLAGS=$CFLAGS + CC=${F77-"f77"} + CFLAGS=$FFLAGS + compiler=$CC + _LT_TAGVAR(compiler, $1)=$CC + _LT_CC_BASENAME([$compiler]) + GCC=$G77 + if test -n "$compiler"; then + AC_MSG_CHECKING([if libtool supports shared libraries]) + AC_MSG_RESULT([$can_build_shared]) + + AC_MSG_CHECKING([whether to build shared libraries]) + test "$can_build_shared" = "no" && enable_shared=no + + # On AIX, shared libraries and static libraries use the same namespace, and + # are all built from PIC. + case $host_os in + aix3*) + test "$enable_shared" = yes && enable_static=no + if test -n "$RANLIB"; then + archive_cmds="$archive_cmds~\$RANLIB \$lib" + postinstall_cmds='$RANLIB $lib' + fi + ;; + aix[[4-9]]*) + if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then + test "$enable_shared" = yes && enable_static=no + fi + ;; + esac + AC_MSG_RESULT([$enable_shared]) + + AC_MSG_CHECKING([whether to build static libraries]) + # Make sure either enable_shared or enable_static is yes. + test "$enable_shared" = yes || enable_static=yes + AC_MSG_RESULT([$enable_static]) + + _LT_TAGVAR(GCC, $1)="$G77" + _LT_TAGVAR(LD, $1)="$LD" + + ## CAVEAT EMPTOR: + ## There is no encapsulation within the following macros, do not change + ## the running order or otherwise move them around unless you know exactly + ## what you are doing... + _LT_COMPILER_PIC($1) + _LT_COMPILER_C_O($1) + _LT_COMPILER_FILE_LOCKS($1) + _LT_LINKER_SHLIBS($1) + _LT_SYS_DYNAMIC_LINKER($1) + _LT_LINKER_HARDCODE_LIBPATH($1) + + _LT_CONFIG($1) + fi # test -n "$compiler" + + GCC=$lt_save_GCC + CC="$lt_save_CC" + CFLAGS="$lt_save_CFLAGS" +fi # test "$_lt_disable_F77" != yes + +AC_LANG_POP +])# _LT_LANG_F77_CONFIG + + +# _LT_LANG_FC_CONFIG([TAG]) +# ------------------------- +# Ensure that the configuration variables for a Fortran compiler are +# suitably defined. These variables are subsequently used by _LT_CONFIG +# to write the compiler configuration to `libtool'. +m4_defun([_LT_LANG_FC_CONFIG], +[AC_LANG_PUSH(Fortran) + +if test -z "$FC" || test "X$FC" = "Xno"; then + _lt_disable_FC=yes +fi + +_LT_TAGVAR(archive_cmds_need_lc, $1)=no +_LT_TAGVAR(allow_undefined_flag, $1)= +_LT_TAGVAR(always_export_symbols, $1)=no +_LT_TAGVAR(archive_expsym_cmds, $1)= +_LT_TAGVAR(export_dynamic_flag_spec, $1)= +_LT_TAGVAR(hardcode_direct, $1)=no +_LT_TAGVAR(hardcode_direct_absolute, $1)=no +_LT_TAGVAR(hardcode_libdir_flag_spec, $1)= +_LT_TAGVAR(hardcode_libdir_separator, $1)= +_LT_TAGVAR(hardcode_minus_L, $1)=no +_LT_TAGVAR(hardcode_automatic, $1)=no +_LT_TAGVAR(inherit_rpath, $1)=no +_LT_TAGVAR(module_cmds, $1)= +_LT_TAGVAR(module_expsym_cmds, $1)= +_LT_TAGVAR(link_all_deplibs, $1)=unknown +_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds +_LT_TAGVAR(reload_flag, $1)=$reload_flag +_LT_TAGVAR(reload_cmds, $1)=$reload_cmds +_LT_TAGVAR(no_undefined_flag, $1)= +_LT_TAGVAR(whole_archive_flag_spec, $1)= +_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no + +# Source file extension for fc test sources. +ac_ext=${ac_fc_srcext-f} + +# Object file extension for compiled fc test sources. +objext=o +_LT_TAGVAR(objext, $1)=$objext + +# No sense in running all these tests if we already determined that +# the FC compiler isn't working. Some variables (like enable_shared) +# are currently assumed to apply to all compilers on this platform, +# and will be corrupted by setting them based on a non-working compiler. +if test "$_lt_disable_FC" != yes; then + # Code to be used in simple compile tests + lt_simple_compile_test_code="\ + subroutine t + return + end +" + + # Code to be used in simple link tests + lt_simple_link_test_code="\ + program t + end +" + + # ltmain only uses $CC for tagged configurations so make sure $CC is set. + _LT_TAG_COMPILER + + # save warnings/boilerplate of simple test code + _LT_COMPILER_BOILERPLATE + _LT_LINKER_BOILERPLATE + + # Allow CC to be a program name with arguments. + lt_save_CC="$CC" + lt_save_GCC=$GCC + lt_save_CFLAGS=$CFLAGS + CC=${FC-"f95"} + CFLAGS=$FCFLAGS + compiler=$CC + GCC=$ac_cv_fc_compiler_gnu + + _LT_TAGVAR(compiler, $1)=$CC + _LT_CC_BASENAME([$compiler]) + + if test -n "$compiler"; then + AC_MSG_CHECKING([if libtool supports shared libraries]) + AC_MSG_RESULT([$can_build_shared]) + + AC_MSG_CHECKING([whether to build shared libraries]) + test "$can_build_shared" = "no" && enable_shared=no + + # On AIX, shared libraries and static libraries use the same namespace, and + # are all built from PIC. + case $host_os in + aix3*) + test "$enable_shared" = yes && enable_static=no + if test -n "$RANLIB"; then + archive_cmds="$archive_cmds~\$RANLIB \$lib" + postinstall_cmds='$RANLIB $lib' + fi + ;; + aix[[4-9]]*) + if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then + test "$enable_shared" = yes && enable_static=no + fi + ;; + esac + AC_MSG_RESULT([$enable_shared]) + + AC_MSG_CHECKING([whether to build static libraries]) + # Make sure either enable_shared or enable_static is yes. + test "$enable_shared" = yes || enable_static=yes + AC_MSG_RESULT([$enable_static]) + + _LT_TAGVAR(GCC, $1)="$ac_cv_fc_compiler_gnu" + _LT_TAGVAR(LD, $1)="$LD" + + ## CAVEAT EMPTOR: + ## There is no encapsulation within the following macros, do not change + ## the running order or otherwise move them around unless you know exactly + ## what you are doing... + _LT_SYS_HIDDEN_LIBDEPS($1) + _LT_COMPILER_PIC($1) + _LT_COMPILER_C_O($1) + _LT_COMPILER_FILE_LOCKS($1) + _LT_LINKER_SHLIBS($1) + _LT_SYS_DYNAMIC_LINKER($1) + _LT_LINKER_HARDCODE_LIBPATH($1) + + _LT_CONFIG($1) + fi # test -n "$compiler" + + GCC=$lt_save_GCC + CC=$lt_save_CC + CFLAGS=$lt_save_CFLAGS +fi # test "$_lt_disable_FC" != yes + +AC_LANG_POP +])# _LT_LANG_FC_CONFIG + + +# _LT_LANG_GCJ_CONFIG([TAG]) +# -------------------------- +# Ensure that the configuration variables for the GNU Java Compiler compiler +# are suitably defined. These variables are subsequently used by _LT_CONFIG +# to write the compiler configuration to `libtool'. +m4_defun([_LT_LANG_GCJ_CONFIG], +[AC_REQUIRE([LT_PROG_GCJ])dnl +AC_LANG_SAVE + +# Source file extension for Java test sources. +ac_ext=java + +# Object file extension for compiled Java test sources. +objext=o +_LT_TAGVAR(objext, $1)=$objext + +# Code to be used in simple compile tests +lt_simple_compile_test_code="class foo {}" + +# Code to be used in simple link tests +lt_simple_link_test_code='public class conftest { public static void main(String[[]] argv) {}; }' + +# ltmain only uses $CC for tagged configurations so make sure $CC is set. +_LT_TAG_COMPILER + +# save warnings/boilerplate of simple test code +_LT_COMPILER_BOILERPLATE +_LT_LINKER_BOILERPLATE + +# Allow CC to be a program name with arguments. +lt_save_CC=$CC +lt_save_CFLAGS=$CFLAGS +lt_save_GCC=$GCC +GCC=yes +CC=${GCJ-"gcj"} +CFLAGS=$GCJFLAGS +compiler=$CC +_LT_TAGVAR(compiler, $1)=$CC +_LT_TAGVAR(LD, $1)="$LD" +_LT_CC_BASENAME([$compiler]) + +# GCJ did not exist at the time GCC didn't implicitly link libc in. +_LT_TAGVAR(archive_cmds_need_lc, $1)=no + +_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds +_LT_TAGVAR(reload_flag, $1)=$reload_flag +_LT_TAGVAR(reload_cmds, $1)=$reload_cmds + +## CAVEAT EMPTOR: +## There is no encapsulation within the following macros, do not change +## the running order or otherwise move them around unless you know exactly +## what you are doing... +if test -n "$compiler"; then + _LT_COMPILER_NO_RTTI($1) + _LT_COMPILER_PIC($1) + _LT_COMPILER_C_O($1) + _LT_COMPILER_FILE_LOCKS($1) + _LT_LINKER_SHLIBS($1) + _LT_LINKER_HARDCODE_LIBPATH($1) + + _LT_CONFIG($1) +fi + +AC_LANG_RESTORE + +GCC=$lt_save_GCC +CC=$lt_save_CC +CFLAGS=$lt_save_CFLAGS +])# _LT_LANG_GCJ_CONFIG + + +# _LT_LANG_GO_CONFIG([TAG]) +# -------------------------- +# Ensure that the configuration variables for the GNU Go compiler +# are suitably defined. These variables are subsequently used by _LT_CONFIG +# to write the compiler configuration to `libtool'. +m4_defun([_LT_LANG_GO_CONFIG], +[AC_REQUIRE([LT_PROG_GO])dnl +AC_LANG_SAVE + +# Source file extension for Go test sources. +ac_ext=go + +# Object file extension for compiled Go test sources. +objext=o +_LT_TAGVAR(objext, $1)=$objext + +# Code to be used in simple compile tests +lt_simple_compile_test_code="package main; func main() { }" + +# Code to be used in simple link tests +lt_simple_link_test_code='package main; func main() { }' + +# ltmain only uses $CC for tagged configurations so make sure $CC is set. +_LT_TAG_COMPILER + +# save warnings/boilerplate of simple test code +_LT_COMPILER_BOILERPLATE +_LT_LINKER_BOILERPLATE + +# Allow CC to be a program name with arguments. +lt_save_CC=$CC +lt_save_CFLAGS=$CFLAGS +lt_save_GCC=$GCC +GCC=yes +CC=${GOC-"gccgo"} +CFLAGS=$GOFLAGS +compiler=$CC +_LT_TAGVAR(compiler, $1)=$CC +_LT_TAGVAR(LD, $1)="$LD" +_LT_CC_BASENAME([$compiler]) + +# Go did not exist at the time GCC didn't implicitly link libc in. +_LT_TAGVAR(archive_cmds_need_lc, $1)=no + +_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds +_LT_TAGVAR(reload_flag, $1)=$reload_flag +_LT_TAGVAR(reload_cmds, $1)=$reload_cmds + +## CAVEAT EMPTOR: +## There is no encapsulation within the following macros, do not change +## the running order or otherwise move them around unless you know exactly +## what you are doing... +if test -n "$compiler"; then + _LT_COMPILER_NO_RTTI($1) + _LT_COMPILER_PIC($1) + _LT_COMPILER_C_O($1) + _LT_COMPILER_FILE_LOCKS($1) + _LT_LINKER_SHLIBS($1) + _LT_LINKER_HARDCODE_LIBPATH($1) + + _LT_CONFIG($1) +fi + +AC_LANG_RESTORE + +GCC=$lt_save_GCC +CC=$lt_save_CC +CFLAGS=$lt_save_CFLAGS +])# _LT_LANG_GO_CONFIG + + +# _LT_LANG_RC_CONFIG([TAG]) +# ------------------------- +# Ensure that the configuration variables for the Windows resource compiler +# are suitably defined. These variables are subsequently used by _LT_CONFIG +# to write the compiler configuration to `libtool'. +m4_defun([_LT_LANG_RC_CONFIG], +[AC_REQUIRE([LT_PROG_RC])dnl +AC_LANG_SAVE + +# Source file extension for RC test sources. +ac_ext=rc + +# Object file extension for compiled RC test sources. +objext=o +_LT_TAGVAR(objext, $1)=$objext + +# Code to be used in simple compile tests +lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }' + +# Code to be used in simple link tests +lt_simple_link_test_code="$lt_simple_compile_test_code" + +# ltmain only uses $CC for tagged configurations so make sure $CC is set. +_LT_TAG_COMPILER + +# save warnings/boilerplate of simple test code +_LT_COMPILER_BOILERPLATE +_LT_LINKER_BOILERPLATE + +# Allow CC to be a program name with arguments. +lt_save_CC="$CC" +lt_save_CFLAGS=$CFLAGS +lt_save_GCC=$GCC +GCC= +CC=${RC-"windres"} +CFLAGS= +compiler=$CC +_LT_TAGVAR(compiler, $1)=$CC +_LT_CC_BASENAME([$compiler]) +_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes + +if test -n "$compiler"; then + : + _LT_CONFIG($1) +fi + +GCC=$lt_save_GCC +AC_LANG_RESTORE +CC=$lt_save_CC +CFLAGS=$lt_save_CFLAGS +])# _LT_LANG_RC_CONFIG + + +# LT_PROG_GCJ +# ----------- +AC_DEFUN([LT_PROG_GCJ], +[m4_ifdef([AC_PROG_GCJ], [AC_PROG_GCJ], + [m4_ifdef([A][M_PROG_GCJ], [A][M_PROG_GCJ], + [AC_CHECK_TOOL(GCJ, gcj,) + test "x${GCJFLAGS+set}" = xset || GCJFLAGS="-g -O2" + AC_SUBST(GCJFLAGS)])])[]dnl +]) + +# Old name: +AU_ALIAS([LT_AC_PROG_GCJ], [LT_PROG_GCJ]) +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([LT_AC_PROG_GCJ], []) + + +# LT_PROG_GO +# ---------- +AC_DEFUN([LT_PROG_GO], +[AC_CHECK_TOOL(GOC, gccgo,) +]) + + +# LT_PROG_RC +# ---------- +AC_DEFUN([LT_PROG_RC], +[AC_CHECK_TOOL(RC, windres,) +]) + +# Old name: +AU_ALIAS([LT_AC_PROG_RC], [LT_PROG_RC]) +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([LT_AC_PROG_RC], []) + + +# _LT_DECL_EGREP +# -------------- +# If we don't have a new enough Autoconf to choose the best grep +# available, choose the one first in the user's PATH. +m4_defun([_LT_DECL_EGREP], +[AC_REQUIRE([AC_PROG_EGREP])dnl +AC_REQUIRE([AC_PROG_FGREP])dnl +test -z "$GREP" && GREP=grep +_LT_DECL([], [GREP], [1], [A grep program that handles long lines]) +_LT_DECL([], [EGREP], [1], [An ERE matcher]) +_LT_DECL([], [FGREP], [1], [A literal string matcher]) +dnl Non-bleeding-edge autoconf doesn't subst GREP, so do it here too +AC_SUBST([GREP]) +]) + + +# _LT_DECL_OBJDUMP +# -------------- +# If we don't have a new enough Autoconf to choose the best objdump +# available, choose the one first in the user's PATH. +m4_defun([_LT_DECL_OBJDUMP], +[AC_CHECK_TOOL(OBJDUMP, objdump, false) +test -z "$OBJDUMP" && OBJDUMP=objdump +_LT_DECL([], [OBJDUMP], [1], [An object symbol dumper]) +AC_SUBST([OBJDUMP]) +]) + +# _LT_DECL_DLLTOOL +# ---------------- +# Ensure DLLTOOL variable is set. +m4_defun([_LT_DECL_DLLTOOL], +[AC_CHECK_TOOL(DLLTOOL, dlltool, false) +test -z "$DLLTOOL" && DLLTOOL=dlltool +_LT_DECL([], [DLLTOOL], [1], [DLL creation program]) +AC_SUBST([DLLTOOL]) +]) + +# _LT_DECL_SED +# ------------ +# Check for a fully-functional sed program, that truncates +# as few characters as possible. Prefer GNU sed if found. +m4_defun([_LT_DECL_SED], +[AC_PROG_SED +test -z "$SED" && SED=sed +Xsed="$SED -e 1s/^X//" +_LT_DECL([], [SED], [1], [A sed program that does not truncate output]) +_LT_DECL([], [Xsed], ["\$SED -e 1s/^X//"], + [Sed that helps us avoid accidentally triggering echo(1) options like -n]) +])# _LT_DECL_SED + +m4_ifndef([AC_PROG_SED], [ +############################################################ +# NOTE: This macro has been submitted for inclusion into # +# GNU Autoconf as AC_PROG_SED. When it is available in # +# a released version of Autoconf we should remove this # +# macro and use it instead. # +############################################################ + +m4_defun([AC_PROG_SED], +[AC_MSG_CHECKING([for a sed that does not truncate output]) +AC_CACHE_VAL(lt_cv_path_SED, +[# Loop through the user's path and test for sed and gsed. +# Then use that list of sed's as ones to test for truncation. +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for lt_ac_prog in sed gsed; do + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$lt_ac_prog$ac_exec_ext"; then + lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext" + fi + done + done +done +IFS=$as_save_IFS +lt_ac_max=0 +lt_ac_count=0 +# Add /usr/xpg4/bin/sed as it is typically found on Solaris +# along with /bin/sed that truncates output. +for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do + test ! -f $lt_ac_sed && continue + cat /dev/null > conftest.in + lt_ac_count=0 + echo $ECHO_N "0123456789$ECHO_C" >conftest.in + # Check for GNU sed and select it if it is found. + if "$lt_ac_sed" --version 2>&1 < /dev/null | grep 'GNU' > /dev/null; then + lt_cv_path_SED=$lt_ac_sed + break + fi + while true; do + cat conftest.in conftest.in >conftest.tmp + mv conftest.tmp conftest.in + cp conftest.in conftest.nl + echo >>conftest.nl + $lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break + cmp -s conftest.out conftest.nl || break + # 10000 chars as input seems more than enough + test $lt_ac_count -gt 10 && break + lt_ac_count=`expr $lt_ac_count + 1` + if test $lt_ac_count -gt $lt_ac_max; then + lt_ac_max=$lt_ac_count + lt_cv_path_SED=$lt_ac_sed + fi + done +done +]) +SED=$lt_cv_path_SED +AC_SUBST([SED]) +AC_MSG_RESULT([$SED]) +])#AC_PROG_SED +])#m4_ifndef + +# Old name: +AU_ALIAS([LT_AC_PROG_SED], [AC_PROG_SED]) +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([LT_AC_PROG_SED], []) + + +# _LT_CHECK_SHELL_FEATURES +# ------------------------ +# Find out whether the shell is Bourne or XSI compatible, +# or has some other useful features. +m4_defun([_LT_CHECK_SHELL_FEATURES], +[AC_MSG_CHECKING([whether the shell understands some XSI constructs]) +# Try some XSI features +xsi_shell=no +( _lt_dummy="a/b/c" + test "${_lt_dummy##*/},${_lt_dummy%/*},${_lt_dummy#??}"${_lt_dummy%"$_lt_dummy"}, \ + = c,a/b,b/c, \ + && eval 'test $(( 1 + 1 )) -eq 2 \ + && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \ + && xsi_shell=yes +AC_MSG_RESULT([$xsi_shell]) +_LT_CONFIG_LIBTOOL_INIT([xsi_shell='$xsi_shell']) + +AC_MSG_CHECKING([whether the shell understands "+="]) +lt_shell_append=no +( foo=bar; set foo baz; eval "$[1]+=\$[2]" && test "$foo" = barbaz ) \ + >/dev/null 2>&1 \ + && lt_shell_append=yes +AC_MSG_RESULT([$lt_shell_append]) +_LT_CONFIG_LIBTOOL_INIT([lt_shell_append='$lt_shell_append']) + +if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then + lt_unset=unset +else + lt_unset=false +fi +_LT_DECL([], [lt_unset], [0], [whether the shell understands "unset"])dnl + +# test EBCDIC or ASCII +case `echo X|tr X '\101'` in + A) # ASCII based system + # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr + lt_SP2NL='tr \040 \012' + lt_NL2SP='tr \015\012 \040\040' + ;; + *) # EBCDIC based system + lt_SP2NL='tr \100 \n' + lt_NL2SP='tr \r\n \100\100' + ;; +esac +_LT_DECL([SP2NL], [lt_SP2NL], [1], [turn spaces into newlines])dnl +_LT_DECL([NL2SP], [lt_NL2SP], [1], [turn newlines into spaces])dnl +])# _LT_CHECK_SHELL_FEATURES + + +# _LT_PROG_FUNCTION_REPLACE (FUNCNAME, REPLACEMENT-BODY) +# ------------------------------------------------------ +# In `$cfgfile', look for function FUNCNAME delimited by `^FUNCNAME ()$' and +# '^} FUNCNAME ', and replace its body with REPLACEMENT-BODY. +m4_defun([_LT_PROG_FUNCTION_REPLACE], +[dnl { +sed -e '/^$1 ()$/,/^} # $1 /c\ +$1 ()\ +{\ +m4_bpatsubsts([$2], [$], [\\], [^\([ ]\)], [\\\1]) +} # Extended-shell $1 implementation' "$cfgfile" > $cfgfile.tmp \ + && mv -f "$cfgfile.tmp" "$cfgfile" \ + || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") +test 0 -eq $? || _lt_function_replace_fail=: +]) + + +# _LT_PROG_REPLACE_SHELLFNS +# ------------------------- +# Replace existing portable implementations of several shell functions with +# equivalent extended shell implementations where those features are available.. +m4_defun([_LT_PROG_REPLACE_SHELLFNS], +[if test x"$xsi_shell" = xyes; then + _LT_PROG_FUNCTION_REPLACE([func_dirname], [dnl + case ${1} in + */*) func_dirname_result="${1%/*}${2}" ;; + * ) func_dirname_result="${3}" ;; + esac]) + + _LT_PROG_FUNCTION_REPLACE([func_basename], [dnl + func_basename_result="${1##*/}"]) + + _LT_PROG_FUNCTION_REPLACE([func_dirname_and_basename], [dnl + case ${1} in + */*) func_dirname_result="${1%/*}${2}" ;; + * ) func_dirname_result="${3}" ;; + esac + func_basename_result="${1##*/}"]) + + _LT_PROG_FUNCTION_REPLACE([func_stripname], [dnl + # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are + # positional parameters, so assign one to ordinary parameter first. + func_stripname_result=${3} + func_stripname_result=${func_stripname_result#"${1}"} + func_stripname_result=${func_stripname_result%"${2}"}]) + + _LT_PROG_FUNCTION_REPLACE([func_split_long_opt], [dnl + func_split_long_opt_name=${1%%=*} + func_split_long_opt_arg=${1#*=}]) + + _LT_PROG_FUNCTION_REPLACE([func_split_short_opt], [dnl + func_split_short_opt_arg=${1#??} + func_split_short_opt_name=${1%"$func_split_short_opt_arg"}]) + + _LT_PROG_FUNCTION_REPLACE([func_lo2o], [dnl + case ${1} in + *.lo) func_lo2o_result=${1%.lo}.${objext} ;; + *) func_lo2o_result=${1} ;; + esac]) + + _LT_PROG_FUNCTION_REPLACE([func_xform], [ func_xform_result=${1%.*}.lo]) + + _LT_PROG_FUNCTION_REPLACE([func_arith], [ func_arith_result=$(( $[*] ))]) + + _LT_PROG_FUNCTION_REPLACE([func_len], [ func_len_result=${#1}]) +fi + +if test x"$lt_shell_append" = xyes; then + _LT_PROG_FUNCTION_REPLACE([func_append], [ eval "${1}+=\\${2}"]) + + _LT_PROG_FUNCTION_REPLACE([func_append_quoted], [dnl + func_quote_for_eval "${2}" +dnl m4 expansion turns \\\\ into \\, and then the shell eval turns that into \ + eval "${1}+=\\\\ \\$func_quote_for_eval_result"]) + + # Save a `func_append' function call where possible by direct use of '+=' + sed -e 's%func_append \([[a-zA-Z_]]\{1,\}\) "%\1+="%g' $cfgfile > $cfgfile.tmp \ + && mv -f "$cfgfile.tmp" "$cfgfile" \ + || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") + test 0 -eq $? || _lt_function_replace_fail=: +else + # Save a `func_append' function call even when '+=' is not available + sed -e 's%func_append \([[a-zA-Z_]]\{1,\}\) "%\1="$\1%g' $cfgfile > $cfgfile.tmp \ + && mv -f "$cfgfile.tmp" "$cfgfile" \ + || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp") + test 0 -eq $? || _lt_function_replace_fail=: +fi + +if test x"$_lt_function_replace_fail" = x":"; then + AC_MSG_WARN([Unable to substitute extended shell functions in $ofile]) +fi +]) + +# _LT_PATH_CONVERSION_FUNCTIONS +# ----------------------------- +# Determine which file name conversion functions should be used by +# func_to_host_file (and, implicitly, by func_to_host_path). These are needed +# for certain cross-compile configurations and native mingw. +m4_defun([_LT_PATH_CONVERSION_FUNCTIONS], +[AC_REQUIRE([AC_CANONICAL_HOST])dnl +AC_REQUIRE([AC_CANONICAL_BUILD])dnl +AC_MSG_CHECKING([how to convert $build file names to $host format]) +AC_CACHE_VAL(lt_cv_to_host_file_cmd, +[case $host in + *-*-mingw* ) + case $build in + *-*-mingw* ) # actually msys + lt_cv_to_host_file_cmd=func_convert_file_msys_to_w32 + ;; + *-*-cygwin* ) + lt_cv_to_host_file_cmd=func_convert_file_cygwin_to_w32 + ;; + * ) # otherwise, assume *nix + lt_cv_to_host_file_cmd=func_convert_file_nix_to_w32 + ;; + esac + ;; + *-*-cygwin* ) + case $build in + *-*-mingw* ) # actually msys + lt_cv_to_host_file_cmd=func_convert_file_msys_to_cygwin + ;; + *-*-cygwin* ) + lt_cv_to_host_file_cmd=func_convert_file_noop + ;; + * ) # otherwise, assume *nix + lt_cv_to_host_file_cmd=func_convert_file_nix_to_cygwin + ;; + esac + ;; + * ) # unhandled hosts (and "normal" native builds) + lt_cv_to_host_file_cmd=func_convert_file_noop + ;; +esac +]) +to_host_file_cmd=$lt_cv_to_host_file_cmd +AC_MSG_RESULT([$lt_cv_to_host_file_cmd]) +_LT_DECL([to_host_file_cmd], [lt_cv_to_host_file_cmd], + [0], [convert $build file names to $host format])dnl + +AC_MSG_CHECKING([how to convert $build file names to toolchain format]) +AC_CACHE_VAL(lt_cv_to_tool_file_cmd, +[#assume ordinary cross tools, or native build. +lt_cv_to_tool_file_cmd=func_convert_file_noop +case $host in + *-*-mingw* ) + case $build in + *-*-mingw* ) # actually msys + lt_cv_to_tool_file_cmd=func_convert_file_msys_to_w32 + ;; + esac + ;; +esac +]) +to_tool_file_cmd=$lt_cv_to_tool_file_cmd +AC_MSG_RESULT([$lt_cv_to_tool_file_cmd]) +_LT_DECL([to_tool_file_cmd], [lt_cv_to_tool_file_cmd], + [0], [convert $build files to toolchain format])dnl +])# _LT_PATH_CONVERSION_FUNCTIONS diff -Nru libshairport-1.2.0.20310.1/m4/lt~obsolete.m4 libshairport-1.2.1~git20120110.aeb4987/m4/lt~obsolete.m4 --- libshairport-1.2.0.20310.1/m4/lt~obsolete.m4 1970-01-01 00:00:00.000000000 +0000 +++ libshairport-1.2.1~git20120110.aeb4987/m4/lt~obsolete.m4 2012-01-11 04:34:38.000000000 +0000 @@ -0,0 +1,98 @@ +# lt~obsolete.m4 -- aclocal satisfying obsolete definitions. -*-Autoconf-*- +# +# Copyright (C) 2004, 2005, 2007, 2009 Free Software Foundation, Inc. +# Written by Scott James Remnant, 2004. +# +# This file is free software; the Free Software Foundation gives +# unlimited permission to copy and/or distribute it, with or without +# modifications, as long as this notice is preserved. + +# serial 5 lt~obsolete.m4 + +# These exist entirely to fool aclocal when bootstrapping libtool. +# +# In the past libtool.m4 has provided macros via AC_DEFUN (or AU_DEFUN) +# which have later been changed to m4_define as they aren't part of the +# exported API, or moved to Autoconf or Automake where they belong. +# +# The trouble is, aclocal is a bit thick. It'll see the old AC_DEFUN +# in /usr/share/aclocal/libtool.m4 and remember it, then when it sees us +# using a macro with the same name in our local m4/libtool.m4 it'll +# pull the old libtool.m4 in (it doesn't see our shiny new m4_define +# and doesn't know about Autoconf macros at all.) +# +# So we provide this file, which has a silly filename so it's always +# included after everything else. This provides aclocal with the +# AC_DEFUNs it wants, but when m4 processes it, it doesn't do anything +# because those macros already exist, or will be overwritten later. +# We use AC_DEFUN over AU_DEFUN for compatibility with aclocal-1.6. +# +# Anytime we withdraw an AC_DEFUN or AU_DEFUN, remember to add it here. +# Yes, that means every name once taken will need to remain here until +# we give up compatibility with versions before 1.7, at which point +# we need to keep only those names which we still refer to. + +# This is to help aclocal find these macros, as it can't see m4_define. +AC_DEFUN([LTOBSOLETE_VERSION], [m4_if([1])]) + +m4_ifndef([AC_LIBTOOL_LINKER_OPTION], [AC_DEFUN([AC_LIBTOOL_LINKER_OPTION])]) +m4_ifndef([AC_PROG_EGREP], [AC_DEFUN([AC_PROG_EGREP])]) +m4_ifndef([_LT_AC_PROG_ECHO_BACKSLASH], [AC_DEFUN([_LT_AC_PROG_ECHO_BACKSLASH])]) +m4_ifndef([_LT_AC_SHELL_INIT], [AC_DEFUN([_LT_AC_SHELL_INIT])]) +m4_ifndef([_LT_AC_SYS_LIBPATH_AIX], [AC_DEFUN([_LT_AC_SYS_LIBPATH_AIX])]) +m4_ifndef([_LT_PROG_LTMAIN], [AC_DEFUN([_LT_PROG_LTMAIN])]) +m4_ifndef([_LT_AC_TAGVAR], [AC_DEFUN([_LT_AC_TAGVAR])]) +m4_ifndef([AC_LTDL_ENABLE_INSTALL], [AC_DEFUN([AC_LTDL_ENABLE_INSTALL])]) +m4_ifndef([AC_LTDL_PREOPEN], [AC_DEFUN([AC_LTDL_PREOPEN])]) +m4_ifndef([_LT_AC_SYS_COMPILER], [AC_DEFUN([_LT_AC_SYS_COMPILER])]) +m4_ifndef([_LT_AC_LOCK], [AC_DEFUN([_LT_AC_LOCK])]) +m4_ifndef([AC_LIBTOOL_SYS_OLD_ARCHIVE], [AC_DEFUN([AC_LIBTOOL_SYS_OLD_ARCHIVE])]) +m4_ifndef([_LT_AC_TRY_DLOPEN_SELF], [AC_DEFUN([_LT_AC_TRY_DLOPEN_SELF])]) +m4_ifndef([AC_LIBTOOL_PROG_CC_C_O], [AC_DEFUN([AC_LIBTOOL_PROG_CC_C_O])]) +m4_ifndef([AC_LIBTOOL_SYS_HARD_LINK_LOCKS], [AC_DEFUN([AC_LIBTOOL_SYS_HARD_LINK_LOCKS])]) +m4_ifndef([AC_LIBTOOL_OBJDIR], [AC_DEFUN([AC_LIBTOOL_OBJDIR])]) +m4_ifndef([AC_LTDL_OBJDIR], [AC_DEFUN([AC_LTDL_OBJDIR])]) +m4_ifndef([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH], [AC_DEFUN([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH])]) +m4_ifndef([AC_LIBTOOL_SYS_LIB_STRIP], [AC_DEFUN([AC_LIBTOOL_SYS_LIB_STRIP])]) +m4_ifndef([AC_PATH_MAGIC], [AC_DEFUN([AC_PATH_MAGIC])]) +m4_ifndef([AC_PROG_LD_GNU], [AC_DEFUN([AC_PROG_LD_GNU])]) +m4_ifndef([AC_PROG_LD_RELOAD_FLAG], [AC_DEFUN([AC_PROG_LD_RELOAD_FLAG])]) +m4_ifndef([AC_DEPLIBS_CHECK_METHOD], [AC_DEFUN([AC_DEPLIBS_CHECK_METHOD])]) +m4_ifndef([AC_LIBTOOL_PROG_COMPILER_NO_RTTI], [AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_NO_RTTI])]) +m4_ifndef([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE], [AC_DEFUN([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE])]) +m4_ifndef([AC_LIBTOOL_PROG_COMPILER_PIC], [AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_PIC])]) +m4_ifndef([AC_LIBTOOL_PROG_LD_SHLIBS], [AC_DEFUN([AC_LIBTOOL_PROG_LD_SHLIBS])]) +m4_ifndef([AC_LIBTOOL_POSTDEP_PREDEP], [AC_DEFUN([AC_LIBTOOL_POSTDEP_PREDEP])]) +m4_ifndef([LT_AC_PROG_EGREP], [AC_DEFUN([LT_AC_PROG_EGREP])]) +m4_ifndef([LT_AC_PROG_SED], [AC_DEFUN([LT_AC_PROG_SED])]) +m4_ifndef([_LT_CC_BASENAME], [AC_DEFUN([_LT_CC_BASENAME])]) +m4_ifndef([_LT_COMPILER_BOILERPLATE], [AC_DEFUN([_LT_COMPILER_BOILERPLATE])]) +m4_ifndef([_LT_LINKER_BOILERPLATE], [AC_DEFUN([_LT_LINKER_BOILERPLATE])]) +m4_ifndef([_AC_PROG_LIBTOOL], [AC_DEFUN([_AC_PROG_LIBTOOL])]) +m4_ifndef([AC_LIBTOOL_SETUP], [AC_DEFUN([AC_LIBTOOL_SETUP])]) +m4_ifndef([_LT_AC_CHECK_DLFCN], [AC_DEFUN([_LT_AC_CHECK_DLFCN])]) +m4_ifndef([AC_LIBTOOL_SYS_DYNAMIC_LINKER], [AC_DEFUN([AC_LIBTOOL_SYS_DYNAMIC_LINKER])]) +m4_ifndef([_LT_AC_TAGCONFIG], [AC_DEFUN([_LT_AC_TAGCONFIG])]) +m4_ifndef([AC_DISABLE_FAST_INSTALL], [AC_DEFUN([AC_DISABLE_FAST_INSTALL])]) +m4_ifndef([_LT_AC_LANG_CXX], [AC_DEFUN([_LT_AC_LANG_CXX])]) +m4_ifndef([_LT_AC_LANG_F77], [AC_DEFUN([_LT_AC_LANG_F77])]) +m4_ifndef([_LT_AC_LANG_GCJ], [AC_DEFUN([_LT_AC_LANG_GCJ])]) +m4_ifndef([AC_LIBTOOL_LANG_C_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_C_CONFIG])]) +m4_ifndef([_LT_AC_LANG_C_CONFIG], [AC_DEFUN([_LT_AC_LANG_C_CONFIG])]) +m4_ifndef([AC_LIBTOOL_LANG_CXX_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_CXX_CONFIG])]) +m4_ifndef([_LT_AC_LANG_CXX_CONFIG], [AC_DEFUN([_LT_AC_LANG_CXX_CONFIG])]) +m4_ifndef([AC_LIBTOOL_LANG_F77_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_F77_CONFIG])]) +m4_ifndef([_LT_AC_LANG_F77_CONFIG], [AC_DEFUN([_LT_AC_LANG_F77_CONFIG])]) +m4_ifndef([AC_LIBTOOL_LANG_GCJ_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_GCJ_CONFIG])]) +m4_ifndef([_LT_AC_LANG_GCJ_CONFIG], [AC_DEFUN([_LT_AC_LANG_GCJ_CONFIG])]) +m4_ifndef([AC_LIBTOOL_LANG_RC_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_RC_CONFIG])]) +m4_ifndef([_LT_AC_LANG_RC_CONFIG], [AC_DEFUN([_LT_AC_LANG_RC_CONFIG])]) +m4_ifndef([AC_LIBTOOL_CONFIG], [AC_DEFUN([AC_LIBTOOL_CONFIG])]) +m4_ifndef([_LT_AC_FILE_LTDLL_C], [AC_DEFUN([_LT_AC_FILE_LTDLL_C])]) +m4_ifndef([_LT_REQUIRED_DARWIN_CHECKS], [AC_DEFUN([_LT_REQUIRED_DARWIN_CHECKS])]) +m4_ifndef([_LT_AC_PROG_CXXCPP], [AC_DEFUN([_LT_AC_PROG_CXXCPP])]) +m4_ifndef([_LT_PREPARE_SED_QUOTE_VARS], [AC_DEFUN([_LT_PREPARE_SED_QUOTE_VARS])]) +m4_ifndef([_LT_PROG_ECHO_BACKSLASH], [AC_DEFUN([_LT_PROG_ECHO_BACKSLASH])]) +m4_ifndef([_LT_PROG_F77], [AC_DEFUN([_LT_PROG_F77])]) +m4_ifndef([_LT_PROG_FC], [AC_DEFUN([_LT_PROG_FC])]) +m4_ifndef([_LT_PROG_CXX], [AC_DEFUN([_LT_PROG_CXX])]) diff -Nru libshairport-1.2.0.20310.1/m4/ltoptions.m4 libshairport-1.2.1~git20120110.aeb4987/m4/ltoptions.m4 --- libshairport-1.2.0.20310.1/m4/ltoptions.m4 1970-01-01 00:00:00.000000000 +0000 +++ libshairport-1.2.1~git20120110.aeb4987/m4/ltoptions.m4 2012-01-11 04:34:38.000000000 +0000 @@ -0,0 +1,384 @@ +# Helper functions for option handling. -*- Autoconf -*- +# +# Copyright (C) 2004, 2005, 2007, 2008, 2009 Free Software Foundation, +# Inc. +# Written by Gary V. Vaughan, 2004 +# +# This file is free software; the Free Software Foundation gives +# unlimited permission to copy and/or distribute it, with or without +# modifications, as long as this notice is preserved. + +# serial 7 ltoptions.m4 + +# This is to help aclocal find these macros, as it can't see m4_define. +AC_DEFUN([LTOPTIONS_VERSION], [m4_if([1])]) + + +# _LT_MANGLE_OPTION(MACRO-NAME, OPTION-NAME) +# ------------------------------------------ +m4_define([_LT_MANGLE_OPTION], +[[_LT_OPTION_]m4_bpatsubst($1__$2, [[^a-zA-Z0-9_]], [_])]) + + +# _LT_SET_OPTION(MACRO-NAME, OPTION-NAME) +# --------------------------------------- +# Set option OPTION-NAME for macro MACRO-NAME, and if there is a +# matching handler defined, dispatch to it. Other OPTION-NAMEs are +# saved as a flag. +m4_define([_LT_SET_OPTION], +[m4_define(_LT_MANGLE_OPTION([$1], [$2]))dnl +m4_ifdef(_LT_MANGLE_DEFUN([$1], [$2]), + _LT_MANGLE_DEFUN([$1], [$2]), + [m4_warning([Unknown $1 option `$2'])])[]dnl +]) + + +# _LT_IF_OPTION(MACRO-NAME, OPTION-NAME, IF-SET, [IF-NOT-SET]) +# ------------------------------------------------------------ +# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise. +m4_define([_LT_IF_OPTION], +[m4_ifdef(_LT_MANGLE_OPTION([$1], [$2]), [$3], [$4])]) + + +# _LT_UNLESS_OPTIONS(MACRO-NAME, OPTION-LIST, IF-NOT-SET) +# ------------------------------------------------------- +# Execute IF-NOT-SET unless all options in OPTION-LIST for MACRO-NAME +# are set. +m4_define([_LT_UNLESS_OPTIONS], +[m4_foreach([_LT_Option], m4_split(m4_normalize([$2])), + [m4_ifdef(_LT_MANGLE_OPTION([$1], _LT_Option), + [m4_define([$0_found])])])[]dnl +m4_ifdef([$0_found], [m4_undefine([$0_found])], [$3 +])[]dnl +]) + + +# _LT_SET_OPTIONS(MACRO-NAME, OPTION-LIST) +# ---------------------------------------- +# OPTION-LIST is a space-separated list of Libtool options associated +# with MACRO-NAME. If any OPTION has a matching handler declared with +# LT_OPTION_DEFINE, dispatch to that macro; otherwise complain about +# the unknown option and exit. +m4_defun([_LT_SET_OPTIONS], +[# Set options +m4_foreach([_LT_Option], m4_split(m4_normalize([$2])), + [_LT_SET_OPTION([$1], _LT_Option)]) + +m4_if([$1],[LT_INIT],[ + dnl + dnl Simply set some default values (i.e off) if boolean options were not + dnl specified: + _LT_UNLESS_OPTIONS([LT_INIT], [dlopen], [enable_dlopen=no + ]) + _LT_UNLESS_OPTIONS([LT_INIT], [win32-dll], [enable_win32_dll=no + ]) + dnl + dnl If no reference was made to various pairs of opposing options, then + dnl we run the default mode handler for the pair. For example, if neither + dnl `shared' nor `disable-shared' was passed, we enable building of shared + dnl archives by default: + _LT_UNLESS_OPTIONS([LT_INIT], [shared disable-shared], [_LT_ENABLE_SHARED]) + _LT_UNLESS_OPTIONS([LT_INIT], [static disable-static], [_LT_ENABLE_STATIC]) + _LT_UNLESS_OPTIONS([LT_INIT], [pic-only no-pic], [_LT_WITH_PIC]) + _LT_UNLESS_OPTIONS([LT_INIT], [fast-install disable-fast-install], + [_LT_ENABLE_FAST_INSTALL]) + ]) +])# _LT_SET_OPTIONS + + +## --------------------------------- ## +## Macros to handle LT_INIT options. ## +## --------------------------------- ## + +# _LT_MANGLE_DEFUN(MACRO-NAME, OPTION-NAME) +# ----------------------------------------- +m4_define([_LT_MANGLE_DEFUN], +[[_LT_OPTION_DEFUN_]m4_bpatsubst(m4_toupper([$1__$2]), [[^A-Z0-9_]], [_])]) + + +# LT_OPTION_DEFINE(MACRO-NAME, OPTION-NAME, CODE) +# ----------------------------------------------- +m4_define([LT_OPTION_DEFINE], +[m4_define(_LT_MANGLE_DEFUN([$1], [$2]), [$3])[]dnl +])# LT_OPTION_DEFINE + + +# dlopen +# ------ +LT_OPTION_DEFINE([LT_INIT], [dlopen], [enable_dlopen=yes +]) + +AU_DEFUN([AC_LIBTOOL_DLOPEN], +[_LT_SET_OPTION([LT_INIT], [dlopen]) +AC_DIAGNOSE([obsolete], +[$0: Remove this warning and the call to _LT_SET_OPTION when you +put the `dlopen' option into LT_INIT's first parameter.]) +]) + +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AC_LIBTOOL_DLOPEN], []) + + +# win32-dll +# --------- +# Declare package support for building win32 dll's. +LT_OPTION_DEFINE([LT_INIT], [win32-dll], +[enable_win32_dll=yes + +case $host in +*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-cegcc*) + AC_CHECK_TOOL(AS, as, false) + AC_CHECK_TOOL(DLLTOOL, dlltool, false) + AC_CHECK_TOOL(OBJDUMP, objdump, false) + ;; +esac + +test -z "$AS" && AS=as +_LT_DECL([], [AS], [1], [Assembler program])dnl + +test -z "$DLLTOOL" && DLLTOOL=dlltool +_LT_DECL([], [DLLTOOL], [1], [DLL creation program])dnl + +test -z "$OBJDUMP" && OBJDUMP=objdump +_LT_DECL([], [OBJDUMP], [1], [Object dumper program])dnl +])# win32-dll + +AU_DEFUN([AC_LIBTOOL_WIN32_DLL], +[AC_REQUIRE([AC_CANONICAL_HOST])dnl +_LT_SET_OPTION([LT_INIT], [win32-dll]) +AC_DIAGNOSE([obsolete], +[$0: Remove this warning and the call to _LT_SET_OPTION when you +put the `win32-dll' option into LT_INIT's first parameter.]) +]) + +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AC_LIBTOOL_WIN32_DLL], []) + + +# _LT_ENABLE_SHARED([DEFAULT]) +# ---------------------------- +# implement the --enable-shared flag, and supports the `shared' and +# `disable-shared' LT_INIT options. +# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. +m4_define([_LT_ENABLE_SHARED], +[m4_define([_LT_ENABLE_SHARED_DEFAULT], [m4_if($1, no, no, yes)])dnl +AC_ARG_ENABLE([shared], + [AS_HELP_STRING([--enable-shared@<:@=PKGS@:>@], + [build shared libraries @<:@default=]_LT_ENABLE_SHARED_DEFAULT[@:>@])], + [p=${PACKAGE-default} + case $enableval in + yes) enable_shared=yes ;; + no) enable_shared=no ;; + *) + enable_shared=no + # Look at the argument we got. We use all the common list separators. + lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," + for pkg in $enableval; do + IFS="$lt_save_ifs" + if test "X$pkg" = "X$p"; then + enable_shared=yes + fi + done + IFS="$lt_save_ifs" + ;; + esac], + [enable_shared=]_LT_ENABLE_SHARED_DEFAULT) + + _LT_DECL([build_libtool_libs], [enable_shared], [0], + [Whether or not to build shared libraries]) +])# _LT_ENABLE_SHARED + +LT_OPTION_DEFINE([LT_INIT], [shared], [_LT_ENABLE_SHARED([yes])]) +LT_OPTION_DEFINE([LT_INIT], [disable-shared], [_LT_ENABLE_SHARED([no])]) + +# Old names: +AC_DEFUN([AC_ENABLE_SHARED], +[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[shared]) +]) + +AC_DEFUN([AC_DISABLE_SHARED], +[_LT_SET_OPTION([LT_INIT], [disable-shared]) +]) + +AU_DEFUN([AM_ENABLE_SHARED], [AC_ENABLE_SHARED($@)]) +AU_DEFUN([AM_DISABLE_SHARED], [AC_DISABLE_SHARED($@)]) + +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AM_ENABLE_SHARED], []) +dnl AC_DEFUN([AM_DISABLE_SHARED], []) + + + +# _LT_ENABLE_STATIC([DEFAULT]) +# ---------------------------- +# implement the --enable-static flag, and support the `static' and +# `disable-static' LT_INIT options. +# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. +m4_define([_LT_ENABLE_STATIC], +[m4_define([_LT_ENABLE_STATIC_DEFAULT], [m4_if($1, no, no, yes)])dnl +AC_ARG_ENABLE([static], + [AS_HELP_STRING([--enable-static@<:@=PKGS@:>@], + [build static libraries @<:@default=]_LT_ENABLE_STATIC_DEFAULT[@:>@])], + [p=${PACKAGE-default} + case $enableval in + yes) enable_static=yes ;; + no) enable_static=no ;; + *) + enable_static=no + # Look at the argument we got. We use all the common list separators. + lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," + for pkg in $enableval; do + IFS="$lt_save_ifs" + if test "X$pkg" = "X$p"; then + enable_static=yes + fi + done + IFS="$lt_save_ifs" + ;; + esac], + [enable_static=]_LT_ENABLE_STATIC_DEFAULT) + + _LT_DECL([build_old_libs], [enable_static], [0], + [Whether or not to build static libraries]) +])# _LT_ENABLE_STATIC + +LT_OPTION_DEFINE([LT_INIT], [static], [_LT_ENABLE_STATIC([yes])]) +LT_OPTION_DEFINE([LT_INIT], [disable-static], [_LT_ENABLE_STATIC([no])]) + +# Old names: +AC_DEFUN([AC_ENABLE_STATIC], +[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[static]) +]) + +AC_DEFUN([AC_DISABLE_STATIC], +[_LT_SET_OPTION([LT_INIT], [disable-static]) +]) + +AU_DEFUN([AM_ENABLE_STATIC], [AC_ENABLE_STATIC($@)]) +AU_DEFUN([AM_DISABLE_STATIC], [AC_DISABLE_STATIC($@)]) + +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AM_ENABLE_STATIC], []) +dnl AC_DEFUN([AM_DISABLE_STATIC], []) + + + +# _LT_ENABLE_FAST_INSTALL([DEFAULT]) +# ---------------------------------- +# implement the --enable-fast-install flag, and support the `fast-install' +# and `disable-fast-install' LT_INIT options. +# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. +m4_define([_LT_ENABLE_FAST_INSTALL], +[m4_define([_LT_ENABLE_FAST_INSTALL_DEFAULT], [m4_if($1, no, no, yes)])dnl +AC_ARG_ENABLE([fast-install], + [AS_HELP_STRING([--enable-fast-install@<:@=PKGS@:>@], + [optimize for fast installation @<:@default=]_LT_ENABLE_FAST_INSTALL_DEFAULT[@:>@])], + [p=${PACKAGE-default} + case $enableval in + yes) enable_fast_install=yes ;; + no) enable_fast_install=no ;; + *) + enable_fast_install=no + # Look at the argument we got. We use all the common list separators. + lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," + for pkg in $enableval; do + IFS="$lt_save_ifs" + if test "X$pkg" = "X$p"; then + enable_fast_install=yes + fi + done + IFS="$lt_save_ifs" + ;; + esac], + [enable_fast_install=]_LT_ENABLE_FAST_INSTALL_DEFAULT) + +_LT_DECL([fast_install], [enable_fast_install], [0], + [Whether or not to optimize for fast installation])dnl +])# _LT_ENABLE_FAST_INSTALL + +LT_OPTION_DEFINE([LT_INIT], [fast-install], [_LT_ENABLE_FAST_INSTALL([yes])]) +LT_OPTION_DEFINE([LT_INIT], [disable-fast-install], [_LT_ENABLE_FAST_INSTALL([no])]) + +# Old names: +AU_DEFUN([AC_ENABLE_FAST_INSTALL], +[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[fast-install]) +AC_DIAGNOSE([obsolete], +[$0: Remove this warning and the call to _LT_SET_OPTION when you put +the `fast-install' option into LT_INIT's first parameter.]) +]) + +AU_DEFUN([AC_DISABLE_FAST_INSTALL], +[_LT_SET_OPTION([LT_INIT], [disable-fast-install]) +AC_DIAGNOSE([obsolete], +[$0: Remove this warning and the call to _LT_SET_OPTION when you put +the `disable-fast-install' option into LT_INIT's first parameter.]) +]) + +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AC_ENABLE_FAST_INSTALL], []) +dnl AC_DEFUN([AM_DISABLE_FAST_INSTALL], []) + + +# _LT_WITH_PIC([MODE]) +# -------------------- +# implement the --with-pic flag, and support the `pic-only' and `no-pic' +# LT_INIT options. +# MODE is either `yes' or `no'. If omitted, it defaults to `both'. +m4_define([_LT_WITH_PIC], +[AC_ARG_WITH([pic], + [AS_HELP_STRING([--with-pic@<:@=PKGS@:>@], + [try to use only PIC/non-PIC objects @<:@default=use both@:>@])], + [lt_p=${PACKAGE-default} + case $withval in + yes|no) pic_mode=$withval ;; + *) + pic_mode=default + # Look at the argument we got. We use all the common list separators. + lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," + for lt_pkg in $withval; do + IFS="$lt_save_ifs" + if test "X$lt_pkg" = "X$lt_p"; then + pic_mode=yes + fi + done + IFS="$lt_save_ifs" + ;; + esac], + [pic_mode=default]) + +test -z "$pic_mode" && pic_mode=m4_default([$1], [default]) + +_LT_DECL([], [pic_mode], [0], [What type of objects to build])dnl +])# _LT_WITH_PIC + +LT_OPTION_DEFINE([LT_INIT], [pic-only], [_LT_WITH_PIC([yes])]) +LT_OPTION_DEFINE([LT_INIT], [no-pic], [_LT_WITH_PIC([no])]) + +# Old name: +AU_DEFUN([AC_LIBTOOL_PICMODE], +[_LT_SET_OPTION([LT_INIT], [pic-only]) +AC_DIAGNOSE([obsolete], +[$0: Remove this warning and the call to _LT_SET_OPTION when you +put the `pic-only' option into LT_INIT's first parameter.]) +]) + +dnl aclocal-1.4 backwards compatibility: +dnl AC_DEFUN([AC_LIBTOOL_PICMODE], []) + +## ----------------- ## +## LTDL_INIT Options ## +## ----------------- ## + +m4_define([_LTDL_MODE], []) +LT_OPTION_DEFINE([LTDL_INIT], [nonrecursive], + [m4_define([_LTDL_MODE], [nonrecursive])]) +LT_OPTION_DEFINE([LTDL_INIT], [recursive], + [m4_define([_LTDL_MODE], [recursive])]) +LT_OPTION_DEFINE([LTDL_INIT], [subproject], + [m4_define([_LTDL_MODE], [subproject])]) + +m4_define([_LTDL_TYPE], []) +LT_OPTION_DEFINE([LTDL_INIT], [installable], + [m4_define([_LTDL_TYPE], [installable])]) +LT_OPTION_DEFINE([LTDL_INIT], [convenience], + [m4_define([_LTDL_TYPE], [convenience])]) diff -Nru libshairport-1.2.0.20310.1/m4/ltsugar.m4 libshairport-1.2.1~git20120110.aeb4987/m4/ltsugar.m4 --- libshairport-1.2.0.20310.1/m4/ltsugar.m4 1970-01-01 00:00:00.000000000 +0000 +++ libshairport-1.2.1~git20120110.aeb4987/m4/ltsugar.m4 2012-01-11 04:34:38.000000000 +0000 @@ -0,0 +1,123 @@ +# ltsugar.m4 -- libtool m4 base layer. -*-Autoconf-*- +# +# Copyright (C) 2004, 2005, 2007, 2008 Free Software Foundation, Inc. +# Written by Gary V. Vaughan, 2004 +# +# This file is free software; the Free Software Foundation gives +# unlimited permission to copy and/or distribute it, with or without +# modifications, as long as this notice is preserved. + +# serial 6 ltsugar.m4 + +# This is to help aclocal find these macros, as it can't see m4_define. +AC_DEFUN([LTSUGAR_VERSION], [m4_if([0.1])]) + + +# lt_join(SEP, ARG1, [ARG2...]) +# ----------------------------- +# Produce ARG1SEPARG2...SEPARGn, omitting [] arguments and their +# associated separator. +# Needed until we can rely on m4_join from Autoconf 2.62, since all earlier +# versions in m4sugar had bugs. +m4_define([lt_join], +[m4_if([$#], [1], [], + [$#], [2], [[$2]], + [m4_if([$2], [], [], [[$2]_])$0([$1], m4_shift(m4_shift($@)))])]) +m4_define([_lt_join], +[m4_if([$#$2], [2], [], + [m4_if([$2], [], [], [[$1$2]])$0([$1], m4_shift(m4_shift($@)))])]) + + +# lt_car(LIST) +# lt_cdr(LIST) +# ------------ +# Manipulate m4 lists. +# These macros are necessary as long as will still need to support +# Autoconf-2.59 which quotes differently. +m4_define([lt_car], [[$1]]) +m4_define([lt_cdr], +[m4_if([$#], 0, [m4_fatal([$0: cannot be called without arguments])], + [$#], 1, [], + [m4_dquote(m4_shift($@))])]) +m4_define([lt_unquote], $1) + + +# lt_append(MACRO-NAME, STRING, [SEPARATOR]) +# ------------------------------------------ +# Redefine MACRO-NAME to hold its former content plus `SEPARATOR'`STRING'. +# Note that neither SEPARATOR nor STRING are expanded; they are appended +# to MACRO-NAME as is (leaving the expansion for when MACRO-NAME is invoked). +# No SEPARATOR is output if MACRO-NAME was previously undefined (different +# than defined and empty). +# +# This macro is needed until we can rely on Autoconf 2.62, since earlier +# versions of m4sugar mistakenly expanded SEPARATOR but not STRING. +m4_define([lt_append], +[m4_define([$1], + m4_ifdef([$1], [m4_defn([$1])[$3]])[$2])]) + + + +# lt_combine(SEP, PREFIX-LIST, INFIX, SUFFIX1, [SUFFIX2...]) +# ---------------------------------------------------------- +# Produce a SEP delimited list of all paired combinations of elements of +# PREFIX-LIST with SUFFIX1 through SUFFIXn. Each element of the list +# has the form PREFIXmINFIXSUFFIXn. +# Needed until we can rely on m4_combine added in Autoconf 2.62. +m4_define([lt_combine], +[m4_if(m4_eval([$# > 3]), [1], + [m4_pushdef([_Lt_sep], [m4_define([_Lt_sep], m4_defn([lt_car]))])]]dnl +[[m4_foreach([_Lt_prefix], [$2], + [m4_foreach([_Lt_suffix], + ]m4_dquote(m4_dquote(m4_shift(m4_shift(m4_shift($@)))))[, + [_Lt_sep([$1])[]m4_defn([_Lt_prefix])[$3]m4_defn([_Lt_suffix])])])])]) + + +# lt_if_append_uniq(MACRO-NAME, VARNAME, [SEPARATOR], [UNIQ], [NOT-UNIQ]) +# ----------------------------------------------------------------------- +# Iff MACRO-NAME does not yet contain VARNAME, then append it (delimited +# by SEPARATOR if supplied) and expand UNIQ, else NOT-UNIQ. +m4_define([lt_if_append_uniq], +[m4_ifdef([$1], + [m4_if(m4_index([$3]m4_defn([$1])[$3], [$3$2$3]), [-1], + [lt_append([$1], [$2], [$3])$4], + [$5])], + [lt_append([$1], [$2], [$3])$4])]) + + +# lt_dict_add(DICT, KEY, VALUE) +# ----------------------------- +m4_define([lt_dict_add], +[m4_define([$1($2)], [$3])]) + + +# lt_dict_add_subkey(DICT, KEY, SUBKEY, VALUE) +# -------------------------------------------- +m4_define([lt_dict_add_subkey], +[m4_define([$1($2:$3)], [$4])]) + + +# lt_dict_fetch(DICT, KEY, [SUBKEY]) +# ---------------------------------- +m4_define([lt_dict_fetch], +[m4_ifval([$3], + m4_ifdef([$1($2:$3)], [m4_defn([$1($2:$3)])]), + m4_ifdef([$1($2)], [m4_defn([$1($2)])]))]) + + +# lt_if_dict_fetch(DICT, KEY, [SUBKEY], VALUE, IF-TRUE, [IF-FALSE]) +# ----------------------------------------------------------------- +m4_define([lt_if_dict_fetch], +[m4_if(lt_dict_fetch([$1], [$2], [$3]), [$4], + [$5], + [$6])]) + + +# lt_dict_filter(DICT, [SUBKEY], VALUE, [SEPARATOR], KEY, [...]) +# -------------------------------------------------------------- +m4_define([lt_dict_filter], +[m4_if([$5], [], [], + [lt_join(m4_quote(m4_default([$4], [[, ]])), + lt_unquote(m4_split(m4_normalize(m4_foreach(_Lt_key, lt_car([m4_shiftn(4, $@)]), + [lt_if_dict_fetch([$1], _Lt_key, [$2], [$3], [_Lt_key ])])))))])[]dnl +]) diff -Nru libshairport-1.2.0.20310.1/m4/ltversion.m4 libshairport-1.2.1~git20120110.aeb4987/m4/ltversion.m4 --- libshairport-1.2.0.20310.1/m4/ltversion.m4 1970-01-01 00:00:00.000000000 +0000 +++ libshairport-1.2.1~git20120110.aeb4987/m4/ltversion.m4 2012-01-11 04:34:38.000000000 +0000 @@ -0,0 +1,23 @@ +# ltversion.m4 -- version numbers -*- Autoconf -*- +# +# Copyright (C) 2004 Free Software Foundation, Inc. +# Written by Scott James Remnant, 2004 +# +# This file is free software; the Free Software Foundation gives +# unlimited permission to copy and/or distribute it, with or without +# modifications, as long as this notice is preserved. + +# @configure_input@ + +# serial 3337 ltversion.m4 +# This file is part of GNU Libtool + +m4_define([LT_PACKAGE_VERSION], [2.4.2]) +m4_define([LT_PACKAGE_REVISION], [1.3337]) + +AC_DEFUN([LTVERSION_VERSION], +[macro_version='2.4.2' +macro_revision='1.3337' +_LT_DECL(, macro_version, 0, [Which release of libtool.m4 was used?]) +_LT_DECL(, macro_revision, 0) +]) diff -Nru libshairport-1.2.0.20310.1/m4/.placeholder libshairport-1.2.1~git20120110.aeb4987/m4/.placeholder --- libshairport-1.2.0.20310.1/m4/.placeholder 1970-01-01 00:00:00.000000000 +0000 +++ libshairport-1.2.1~git20120110.aeb4987/m4/.placeholder 2012-01-11 04:34:34.000000000 +0000 @@ -0,0 +1,2 @@ +!!! DO NOT DELETE THIS FILE !!! +This is a placeholder so that m4 directory can be tracked by git. diff -Nru libshairport-1.2.0.20310.1/Makefile.am libshairport-1.2.1~git20120110.aeb4987/Makefile.am --- libshairport-1.2.0.20310.1/Makefile.am 2011-09-23 19:13:05.000000000 +0000 +++ libshairport-1.2.1~git20120110.aeb4987/Makefile.am 2012-01-11 04:34:34.000000000 +0000 @@ -1 +1,8 @@ +ACLOCAL_AMFLAGS = -I m4 + SUBDIRS=src + +pkgconfigdir = $(libdir)/pkgconfig +pkgconfig_DATA = libshairport.pc + +EXTRA_DIST = libshairport.pc.in diff -Nru libshairport-1.2.0.20310.1/Makefile.in libshairport-1.2.1~git20120110.aeb4987/Makefile.in --- libshairport-1.2.0.20310.1/Makefile.in 2011-11-10 19:35:57.000000000 +0000 +++ libshairport-1.2.1~git20120110.aeb4987/Makefile.in 2012-01-11 04:34:41.000000000 +0000 @@ -14,6 +14,7 @@ # PARTICULAR PURPOSE. @SET_MAKE@ + VPATH = @srcdir@ pkgdatadir = $(datadir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ @@ -36,17 +37,21 @@ subdir = . DIST_COMMON = README $(am__configure_deps) $(srcdir)/Makefile.am \ $(srcdir)/Makefile.in $(srcdir)/config.h.in \ - $(top_srcdir)/configure AUTHORS COPYING ChangeLog INSTALL NEWS \ - config.guess config.sub depcomp install-sh ltmain.sh missing + $(srcdir)/libshairport.pc.in $(top_srcdir)/configure AUTHORS \ + COPYING ChangeLog INSTALL NEWS config.guess config.sub depcomp \ + install-sh ltmain.sh missing ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -am__aclocal_m4_deps = $(top_srcdir)/configure.in +am__aclocal_m4_deps = $(top_srcdir)/m4/libtool.m4 \ + $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ + $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ + $(top_srcdir)/configure.in am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ configure.lineno config.status.lineno mkinstalldirs = $(install_sh) -d CONFIG_HEADER = config.h -CONFIG_CLEAN_FILES = +CONFIG_CLEAN_FILES = libshairport.pc CONFIG_CLEAN_VPATH_FILES = SOURCES = DIST_SOURCES = @@ -57,6 +62,29 @@ install-pdf-recursive install-ps-recursive install-recursive \ installcheck-recursive installdirs-recursive pdf-recursive \ ps-recursive uninstall-recursive +am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; +am__vpath_adj = case $$p in \ + $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ + *) f=$$p;; \ + esac; +am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; +am__install_max = 40 +am__nobase_strip_setup = \ + srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` +am__nobase_strip = \ + for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" +am__nobase_list = $(am__nobase_strip_setup); \ + for p in $$list; do echo "$$p $$p"; done | \ + sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ + $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ + if (++n[$$2] == $(am__install_max)) \ + { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ + END { for (dir in files) print dir, files[dir] }' +am__base_list = \ + sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ + sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' +am__installdirs = "$(DESTDIR)$(pkgconfigdir)" +DATA = $(pkgconfig_DATA) RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ distclean-recursive maintainer-clean-recursive AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \ @@ -135,6 +163,7 @@ LDFLAGS = @LDFLAGS@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ +LIBSHAIRPORT_LIBTOOL_VERSION = @LIBSHAIRPORT_LIBTOOL_VERSION@ LIBTOOL = @LIBTOOL@ LIPO = @LIPO@ LN_S = @LN_S@ @@ -214,7 +243,11 @@ top_build_prefix = @top_build_prefix@ top_builddir = @top_builddir@ top_srcdir = @top_srcdir@ +ACLOCAL_AMFLAGS = -I m4 SUBDIRS = src +pkgconfigdir = $(libdir)/pkgconfig +pkgconfig_DATA = libshairport.pc +EXTRA_DIST = libshairport.pc.in all: config.h $(MAKE) $(AM_MAKEFLAGS) all-recursive @@ -270,6 +303,8 @@ distclean-hdr: -rm -f config.h stamp-h1 +libshairport.pc: $(top_builddir)/config.status $(srcdir)/libshairport.pc.in + cd $(top_builddir) && $(SHELL) ./config.status $@ mostlyclean-libtool: -rm -f *.lo @@ -279,6 +314,26 @@ distclean-libtool: -rm -f libtool config.lt +install-pkgconfigDATA: $(pkgconfig_DATA) + @$(NORMAL_INSTALL) + test -z "$(pkgconfigdir)" || $(MKDIR_P) "$(DESTDIR)$(pkgconfigdir)" + @list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \ + for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ + echo "$$d$$p"; \ + done | $(am__base_list) | \ + while read files; do \ + echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pkgconfigdir)'"; \ + $(INSTALL_DATA) $$files "$(DESTDIR)$(pkgconfigdir)" || exit $$?; \ + done + +uninstall-pkgconfigDATA: + @$(NORMAL_UNINSTALL) + @list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \ + files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ + test -n "$$files" || exit 0; \ + echo " ( cd '$(DESTDIR)$(pkgconfigdir)' && rm -f" $$files ")"; \ + cd "$(DESTDIR)$(pkgconfigdir)" && rm -f $$files # This directory's subdirectories are mostly independent; you can cd # into them and run `make' without going through this Makefile. @@ -592,9 +647,12 @@ exit 1; } >&2 check-am: all-am check: check-recursive -all-am: Makefile config.h +all-am: Makefile $(DATA) config.h installdirs: installdirs-recursive installdirs-am: + for dir in "$(DESTDIR)$(pkgconfigdir)"; do \ + test -z "$$dir" || $(MKDIR_P) "$$dir"; \ + done install: install-recursive install-exec: install-exec-recursive install-data: install-data-recursive @@ -642,7 +700,7 @@ info-am: -install-data-am: +install-data-am: install-pkgconfigDATA install-dvi: install-dvi-recursive @@ -688,7 +746,7 @@ ps-am: -uninstall-am: +uninstall-am: uninstall-pkgconfigDATA .MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) all \ ctags-recursive install-am install-strip tags-recursive @@ -703,11 +761,12 @@ install install-am install-data install-data-am install-dvi \ install-dvi-am install-exec install-exec-am install-html \ install-html-am install-info install-info-am install-man \ - install-pdf install-pdf-am install-ps install-ps-am \ - install-strip installcheck installcheck-am installdirs \ - installdirs-am maintainer-clean maintainer-clean-generic \ - mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \ - ps ps-am tags tags-recursive uninstall uninstall-am + install-pdf install-pdf-am install-pkgconfigDATA install-ps \ + install-ps-am install-strip installcheck installcheck-am \ + installdirs installdirs-am maintainer-clean \ + maintainer-clean-generic mostlyclean mostlyclean-generic \ + mostlyclean-libtool pdf pdf-am ps ps-am tags tags-recursive \ + uninstall uninstall-am uninstall-pkgconfigDATA # Tell versions [3.59,3.63) of GNU make to not export all variables. diff -Nru libshairport-1.2.0.20310.1/README libshairport-1.2.1~git20120110.aeb4987/README --- libshairport-1.2.0.20310.1/README 2011-09-24 00:43:01.000000000 +0000 +++ libshairport-1.2.1~git20120110.aeb4987/README 2012-01-11 04:34:34.000000000 +0000 @@ -1,3 +1,15 @@ +libshairport +============ +Created by Team XBMC + +This is a fork of ShairPort written by James Laird . The +original maintainer of ShairPort had said that he intended version 0.05 to be +his last release (announcement can be found at +http://mafipulation.org/blagoblig/reversing). Therefore, the XBMC team decided +to fork ShairPort and make it into a library (libshairport) for use with XBMC. + +*** Below is the contents of the original README. *** + ShairPort v0.05 ============== James Laird Binary files /tmp/oYL0Sn27SZ/libshairport-1.2.0.20310.1/._README and /tmp/Wgyqs1Jfgh/libshairport-1.2.1~git20120110.aeb4987/._README differ diff -Nru libshairport-1.2.0.20310.1/src/alac.c libshairport-1.2.1~git20120110.aeb4987/src/alac.c --- libshairport-1.2.0.20310.1/src/alac.c 2011-08-20 22:06:21.000000000 +0000 +++ libshairport-1.2.1~git20120110.aeb4987/src/alac.c 2012-01-11 04:34:34.000000000 +0000 @@ -31,6 +31,9 @@ static const int host_bigendian = 0; +#include "shairport_private.h" +#include "alac.h" + #include #include #include @@ -40,8 +43,6 @@ #include #endif -#include "alac.h" - #define _Swap32(v) do { \ v = (((v) & 0x000000FF) << 0x18) | \ (((v) & 0x0000FF00) << 0x08) | \ @@ -52,10 +53,10 @@ v = (((v) & 0x00FF) << 0x08) | \ (((v) & 0xFF00) >> 0x08); } while (0) -struct {signed int x:24;} se_struct_24; +static struct {signed int x:24;} se_struct_24; #define SignExtend24(val) (se_struct_24.x = val) -void allocate_buffers(alac_file *alac) +void __shairport_allocate_buffers(alac_file *alac) { alac->predicterror_buffer_a = malloc(alac->setinfo_max_samples_per_frame * 4); alac->predicterror_buffer_b = malloc(alac->setinfo_max_samples_per_frame * 4); @@ -67,7 +68,7 @@ alac->uncompressed_bytes_buffer_b = malloc(alac->setinfo_max_samples_per_frame * 4); } -void deallocate_buffers(alac_file *alac) +void __shairport_deallocate_buffers(alac_file *alac) { free(alac->predicterror_buffer_a); free(alac->predicterror_buffer_b); @@ -79,7 +80,7 @@ free(alac->uncompressed_bytes_buffer_b); } -void alac_set_info(alac_file *alac, char *inputbuffer) +void __shairport_alac_set_info(alac_file *alac, char *inputbuffer) { char *ptr = inputbuffer; ptr += 4; /* size */ @@ -123,7 +124,7 @@ _Swap32(alac->setinfo_8a_rate); ptr += 4; - allocate_buffers(alac); + __shairport_allocate_buffers(alac); } @@ -302,7 +303,7 @@ #define RICE_THRESHOLD 8 // maximum number of bits for a rice prefix. -int32_t entropy_decode_value(alac_file* alac, +static int32_t entropy_decode_value(alac_file* alac, int readSampleSize, int k, int rice_kmodifier_mask) @@ -346,7 +347,7 @@ return x; } -void entropy_rice_decode(alac_file* alac, +static void entropy_rice_decode(alac_file* alac, int32_t* outputBuffer, int outputSize, int readSampleSize, @@ -563,7 +564,7 @@ } } -void deinterlace_16(int32_t *buffer_a, int32_t *buffer_b, +static void deinterlace_16(int32_t *buffer_a, int32_t *buffer_b, int16_t *buffer_out, int numchannels, int numsamples, uint8_t interlacing_shift, @@ -622,7 +623,7 @@ } } -void deinterlace_24(int32_t *buffer_a, int32_t *buffer_b, +static void deinterlace_24(int32_t *buffer_a, int32_t *buffer_b, int uncompressed_bytes, int32_t *uncompressed_bytes_buffer_a, int32_t *uncompressed_bytes_buffer_b, void *buffer_out, @@ -700,7 +701,7 @@ } -void decode_frame(alac_file *alac, +void __shairport_decode_frame(alac_file *alac, unsigned char *inbuffer, void *outbuffer, int *outputsize) { @@ -804,7 +805,7 @@ } else { - fprintf(stderr, "FIXME: unhandled predicition type: %i\n", prediction_type); + __shairport_xprintf("FIXME: unhandled predicition type: %i\n", prediction_type); /* i think the only other prediction type (or perhaps this is just a * boolean?) runs adaptive fir twice.. like: * predictor_decompress_fir_adapt(predictor_error, tempout, ...) @@ -885,7 +886,7 @@ } case 20: case 32: - fprintf(stderr, "FIXME: unimplemented sample size %i\n", alac->setinfo_sample_size); + __shairport_xprintf("FIXME: unimplemented sample size %i\n", alac->setinfo_sample_size); break; default: break; @@ -1004,7 +1005,7 @@ } else { /* see mono case */ - fprintf(stderr, "FIXME: unhandled predicition type: %i\n", prediction_type_a); + __shairport_xprintf("FIXME: unhandled predicition type: %i\n", prediction_type_a); } /* channel 2 */ @@ -1029,7 +1030,7 @@ } else { - fprintf(stderr, "FIXME: unhandled predicition type: %i\n", prediction_type_b); + __shairport_xprintf("FIXME: unhandled predicition type: %i\n", prediction_type_b); } } else @@ -1106,7 +1107,7 @@ } case 20: case 32: - fprintf(stderr, "FIXME: unimplemented sample size %i\n", alac->setinfo_sample_size); + __shairport_xprintf("FIXME: unimplemented sample size %i\n", alac->setinfo_sample_size); break; default: break; @@ -1117,7 +1118,7 @@ } } -alac_file *create_alac(int samplesize, int numchannels) +alac_file *__shairport_create_alac(int samplesize, int numchannels) { alac_file *newfile = malloc(sizeof(alac_file)); @@ -1128,7 +1129,7 @@ return newfile; } -void delete_alac(alac_file* f) +void __shairport_delete_alac(alac_file* f) { free(f); } diff -Nru libshairport-1.2.0.20310.1/src/alac.h libshairport-1.2.1~git20120110.aeb4987/src/alac.h --- libshairport-1.2.0.20310.1/src/alac.h 2011-08-20 22:06:21.000000000 +0000 +++ libshairport-1.2.1~git20120110.aeb4987/src/alac.h 2012-01-11 04:34:34.000000000 +0000 @@ -1,16 +1,18 @@ #ifndef __ALAC__DECOMP_H #define __ALAC__DECOMP_H +#include + typedef struct alac_file alac_file; -alac_file *create_alac(int samplesize, int numchannels); -void delete_alac(alac_file* f); -void decode_frame(alac_file *alac, +alac_file *__shairport_create_alac(int samplesize, int numchannels); +void __shairport_delete_alac(alac_file* f); +void __shairport_decode_frame(alac_file *alac, unsigned char *inbuffer, void *outbuffer, int *outputsize); -void alac_set_info(alac_file *alac, char *inputbuffer); -void allocate_buffers(alac_file *alac); -void deallocate_buffers(alac_file *alac); +void __shairport_alac_set_info(alac_file *alac, char *inputbuffer); +void __shairport_allocate_buffers(alac_file *alac); +void __shairport_deallocate_buffers(alac_file *alac); struct alac_file { Binary files /tmp/oYL0Sn27SZ/libshairport-1.2.0.20310.1/src/._hairtunes.c and /tmp/Wgyqs1Jfgh/libshairport-1.2.1~git20120110.aeb4987/src/._hairtunes.c differ diff -Nru libshairport-1.2.0.20310.1/src/hairtunes.c libshairport-1.2.1~git20120110.aeb4987/src/hairtunes.c --- libshairport-1.2.0.20310.1/src/hairtunes.c 2011-09-23 19:55:48.000000000 +0000 +++ libshairport-1.2.1~git20120110.aeb4987/src/hairtunes.c 2012-01-11 04:34:34.000000000 +0000 @@ -25,8 +25,14 @@ */ #define XBMC -//#defined HAS_AO +#define HAS_AO +#include "shairport.h" +#include "shairport_private.h" +#include "hairtunes.h" +#include "alac.h" + +#include #include #include #include @@ -41,21 +47,15 @@ #include #include -#include "hairtunes.h" #include #include -#ifdef HAS_AO -#include -#endif #ifdef FANCY_RESAMPLING #include #endif #include -int debug = 0; - -#include "alac.h" +static int debug = 0; // default buffer size #define BUFFER_FRAMES 320 @@ -64,37 +64,37 @@ #define MAX_PACKET 2048 +extern struct AudioOutput g_ao; typedef unsigned short seq_t; // global options (constant after init) -unsigned char aeskey[16], aesiv[16]; -AES_KEY aes; -char *rtphost = 0; -int dataport = 0, controlport = 0, timingport = 0; -int fmtp[32]; -int sampling_rate; -int frame_size; - -int buffer_start_fill = START_FILL; - -char *libao_driver = NULL; -char *libao_devicename = NULL; -char *libao_deviceid = NULL; // ao_options expects "char*" +static unsigned char aeskey[16], aesiv[16]; +static AES_KEY aes; +static char *rtphost = 0; +static int dataport = 0, controlport = 0, timingport = 0; +static int fmtp[32]; +static int sampling_rate; +static int frame_size; + +int __shairport_buffer_start_fill = START_FILL; + +static char *libao_driver = NULL; +static char *libao_devicename = NULL; +static char *libao_deviceid = NULL; // ao_options expects "char*" // FIFO name and file handle -char *pipename = NULL; -int pipe_handle = -1; +static char *pipename = NULL; +static int pipe_handle = -1; #define FRAME_BYTES (4*frame_size) // maximal resampling shift - conservative #define OUTFRAME_BYTES (4*(frame_size+3)) - -alac_file *decoder_info; +static alac_file *decoder_info; #ifdef FANCY_RESAMPLING -int fancy_resampling = 1; -SRC_STATE *src; +static int fancy_resampling = 1; +static SRC_STATE *src; #endif static int init_rtp(void); @@ -105,41 +105,41 @@ // interthread variables // stdin->decoder -volatile double volume = 1.0; -volatile long fix_volume = 0x10000; +static volatile double volume = 1.0; +static volatile long fix_volume = 0x10000; typedef struct audio_buffer_entry { // decoded audio packets int ready; signed short *data; } abuf_t; -volatile abuf_t audio_buffer[BUFFER_FRAMES]; +static volatile abuf_t audio_buffer[BUFFER_FRAMES]; #define BUFIDX(seqno) ((seq_t)(seqno) % BUFFER_FRAMES) // mutex-protected variables -volatile seq_t ab_read, ab_write; -int ab_buffering = 1, ab_synced = 0; -pthread_mutex_t ab_mutex; -pthread_cond_t ab_buffer_ready; +static volatile seq_t ab_read, ab_write; +static int ab_buffering = 1, ab_synced = 0; +static pthread_mutex_t ab_mutex; +static pthread_cond_t ab_buffer_ready; static void die(char *why) { - fprintf(stderr, "FATAL: %s\n", why); - exit(1); + __shairport_xprintf("FATAL: %s\n", why); + //exit(1); } -static int hex2bin(unsigned char *buf, char *hex) { - int i, j; - if (strlen(hex) != 0x20) - return 1; - for (i=0; i<0x10; i++) { - if (!sscanf(hex, "%2X", &j)) - return 1; - hex += 2; - *buf++ = j; - } - return 0; -} +// static int hex2bin(unsigned char *buf, char *hex) { +// int i, j; +// if (strlen(hex) != 0x20) +// return 1; +// for (i=0; i<0x10; i++) { +// if (!sscanf(hex, "%2X", &j)) +// return 1; +// hex += 2; +// *buf++ = j; +// } +// return 0; +// } -alac_file *alac; +static alac_file *alac; static int init_decoder(void) { frame_size = fmtp[1]; // stereo samples @@ -149,7 +149,7 @@ if (sample_size != 16) die("only 16-bit samples supported!"); - alac = create_alac(sample_size, 2); + alac = __shairport_create_alac(sample_size, 2); if (!alac) return 1; decoder_info = alac; @@ -165,17 +165,17 @@ alac->setinfo_82 = fmtp[9]; alac->setinfo_86 = fmtp[10]; alac->setinfo_8a_rate = fmtp[11]; - allocate_buffers(alac); + __shairport_allocate_buffers(alac); return 0; } static void clean_decoder(void) { - deallocate_buffers(alac); - delete_alac(alac); + __shairport_deallocate_buffers(alac); + __shairport_delete_alac(alac); } -int hairtunes_init(char *pAeskey, char *pAesiv, char *fmtpstr, int pCtrlPort, int pTimingPort, +int __shairport_hairtunes_init(char *pAeskey, char *pAesiv, char *fmtpstr, int pCtrlPort, int pTimingPort, int pDataPort, char *pRtpHost, char*pPipeName, char *pLibaoDriver, char *pLibaoDeviceName, char *pLibaoDeviceId) { volume = 1.0; @@ -184,7 +184,7 @@ dataport = 0; controlport = 0; timingport = 0; - buffer_start_fill = START_FILL; + __shairport_buffer_start_fill = START_FILL; libao_driver = NULL; libao_devicename = NULL; libao_deviceid = NULL; @@ -242,39 +242,39 @@ continue; } if (sscanf(line, "vol: %lf\n", &f)) { - hairtunes_setvolume(f); + __shairport_hairtunes_setvolume(f); continue; } if (!strcmp(line, "exit\n")) { - exit(0); + ;//exit(0); } if (!strcmp(line, "flush\n")) { - hairtunes_flush(); + __shairport_hairtunes_flush(); } } - fprintf(stderr, "bye!\n"); + __shairport_xprintf("bye!\n"); fflush(stderr); #endif return EXIT_SUCCESS; } -void hairtunes_setvolume(float f) +void __shairport_hairtunes_setvolume(float f) { assert(f<=0); if (debug) - fprintf(stderr, "VOL: %lf\n", f); + __shairport_xprintf("VOL: %lf\n", f); volume = pow(10.0,0.05*f); fix_volume = 65536.0 * volume; } -void hairtunes_flush(void) +void __shairport_hairtunes_flush(void) { pthread_mutex_lock(&ab_mutex); ab_resync(); pthread_mutex_unlock(&ab_mutex); if (debug) - fprintf(stderr, "FLUSH\n"); + __shairport_xprintf("FLUSH\n"); } #ifdef HAIRTUNES_STANDALONE @@ -350,7 +350,7 @@ die("can't understand IV"); if (hex2bin(aeskey, hexaeskey)) die("can't understand key"); - return hairtunes_init(NULL, NULL, fmtpstr, controlport, timingport, dataport, + return __shairport_hairtunes_init(NULL, NULL, fmtpstr, controlport, timingport, dataport, NULL, NULL, NULL, NULL, NULL); } #endif @@ -398,14 +398,13 @@ int outsize; - decode_frame(decoder_info, packet, dest, &outsize); + __shairport_decode_frame(decoder_info, packet, dest, &outsize); assert(outsize == FRAME_BYTES); } static void buffer_put_packet(seq_t seqno, char *data, int len) { volatile abuf_t *abuf = 0; - short read; short buf_fill; pthread_mutex_lock(&ab_mutex); @@ -424,7 +423,7 @@ } else if (seq_order(ab_read, seqno)) { // late but not yet played abuf = audio_buffer + BUFIDX(seqno); } else { // too late. - fprintf(stderr, "\nlate packet %04X (%04X:%04X)\n", seqno, ab_read, ab_write); + __shairport_xprintf("\nlate packet %04X (%04X:%04X)\n", seqno, ab_read, ab_write); } buf_fill = ab_write - ab_read; pthread_mutex_unlock(&ab_mutex); @@ -434,7 +433,7 @@ abuf->ready = 1; } - if (ab_buffering && buf_fill >= buffer_start_fill) { + if (ab_buffering && buf_fill >= __shairport_buffer_start_fill) { ab_buffering = 0; pthread_cond_signal(&ab_buffer_ready); } @@ -451,14 +450,15 @@ static int rtp_sockets[2]; // data, control #ifdef AF_INET6 - struct sockaddr_in6 rtp_client; + static struct sockaddr_in6 rtp_client; #else - struct sockaddr_in rtp_client; + static struct sockaddr_in rtp_client; #endif -int rtp_running = 0; +static int rtp_running = 0; -void *rtp_thread_func(void *arg) { +static void *rtp_thread_func(void *arg) { + (void)arg; socklen_t si_len = sizeof(rtp_client); char packet[MAX_PACKET]; char *pktp; @@ -521,7 +521,7 @@ if (seq_order(last, first)) return; - fprintf(stderr, "requesting resend on %d packets (port %d)\n", last-first+1, controlport); + __shairport_xprintf("requesting resend on %d packets (port %d)\n", last-first+1, controlport); char req[8]; // *not* a standard RTCP NACK req[0] = 0x80; @@ -538,7 +538,7 @@ sendto(rtp_sockets[1], req, sizeof(req), 0, (struct sockaddr *)&rtp_client, sizeof(rtp_client)); } -pthread_t rtp_thread; +static pthread_t rtp_thread; static int init_rtp(void) { struct sockaddr_in si; @@ -605,8 +605,8 @@ port += 3; } - printf("port: %d\n", port); // let our handler know where we end up listening - printf("cport: %d\n", port+1); + __shairport_xprintf("port: %d\n", port); // let our handler know where we end up listening + __shairport_xprintf("cport: %d\n", port+1); rtp_sockets[0] = sock; rtp_sockets[1] = csock; @@ -615,7 +615,7 @@ return port; } -void clean_rtp() +static void clean_rtp() { rtp_running = 0; pthread_join(rtp_thread, NULL); @@ -674,7 +674,7 @@ return w; } -double bf_playback_rate = 1.0; +static double bf_playback_rate = 1.0; static double bf_est_drift = 0.0; // local clock is slower by static biquad_t bf_drift_lpf; @@ -683,7 +683,8 @@ static double desired_fill; static int fill_count; -void bf_est_reset(short fill) { +static void bf_est_reset(short fill) { + (void)fill; biquad_lpf(&bf_drift_lpf, 1.0/180.0, 0.3); biquad_lpf(&bf_err_lpf, 1.0/10.0, 0.25); biquad_lpf(&bf_err_deriv_lpf, 1.0/2.0, 0.2); @@ -692,7 +693,7 @@ bf_est_err = bf_last_err = 0; desired_fill = fill_count = 0; } -void bf_est_update(short fill) { +static void bf_est_update(short fill) { if (fill_count < 1000) { desired_fill += (double)fill/1000.0; fill_count++; @@ -709,14 +710,14 @@ bf_est_drift = biquad_filt(&bf_drift_lpf, CONTROL_B*(bf_est_err*CONTROL_A + err_deriv) + bf_est_drift); if (debug) - fprintf(stderr, "bf %d err %f drift %f desiring %f ed %f estd %f\r", fill, bf_est_err, bf_est_drift, desired_fill, err_deriv, err_deriv + CONTROL_A*bf_est_err); + __shairport_xprintf("bf %d err %f drift %f desiring %f ed %f estd %f\r", fill, bf_est_err, bf_est_drift, desired_fill, err_deriv, err_deriv + CONTROL_A*bf_est_err); bf_playback_rate = 1.0 + CONTROL_A*bf_est_err + bf_est_drift; bf_last_err = bf_est_err; } // get the next frame, when available. return 0 if underrun/stream reset. -short *buffer_get_frame(void) { +static short *buffer_get_frame(void) { short buf_fill; seq_t read; @@ -725,7 +726,7 @@ buf_fill = ab_write - ab_read; if (buf_fill < 1 || !ab_synced || ab_buffering) { // init or underrun. stop and wait if (ab_synced) - fprintf(stderr, "\nunderrun\n"); + __shairport_xprintf("\nunderrun\n"); ab_buffering = 1; pthread_cond_wait(&ab_buffer_ready, &ab_mutex); @@ -737,7 +738,7 @@ return 0; } if (buf_fill >= BUFFER_FRAMES) { // overrunning! uh-oh. restart at a sane distance - fprintf(stderr, "\noverrun.\n"); + __shairport_xprintf("\noverrun.\n"); ab_read = ab_write - START_FILL; } read = ab_read; @@ -749,14 +750,14 @@ volatile abuf_t *curframe = audio_buffer + BUFIDX(read); if (!curframe->ready) { - fprintf(stderr, "\nmissing frame.\n"); + __shairport_xprintf("\nmissing frame.\n"); memset(curframe->data, 0, FRAME_BYTES); } curframe->ready = 0; return curframe->data; } -int stuff_buffer(double playback_rate, short *inptr, short *outptr) { +static int stuff_buffer(double playback_rate, short *inptr, short *outptr) { int i; int stuffsamp = frame_size; int stuff = 0; @@ -776,13 +777,13 @@ if (stuff) { if (stuff==1) { if (debug) - fprintf(stderr, "+++++++++\n"); + __shairport_xprintf("+++++++++\n"); // interpolate one sample *outptr++ = dithered_vol(((long)inptr[-2] + (long)inptr[0]) >> 1); *outptr++ = dithered_vol(((long)inptr[-1] + (long)inptr[1]) >> 1); } else if (stuff==-1) { if (debug) - fprintf(stderr, "---------\n"); + __shairport_xprintf("---------\n"); inptr++; inptr++; } @@ -795,9 +796,9 @@ return frame_size + stuff; } -int audio_running = 0; +static int audio_running = 0; -void *audio_thread_func(void *arg) { +static void *audio_thread_func(void *arg) { #ifdef HAS_AO ao_device* dev = arg; #endif @@ -849,6 +850,11 @@ inbuf = buffer_get_frame(); } while (!inbuf && audio_running); + if(!audio_running) + { + return 0; //don't access inbuf if audio stopped + } + #ifdef FANCY_RESAMPLING if (fancy_resampling) { int i; @@ -881,7 +887,7 @@ } #ifdef HAS_AO } else { - ao_play(dev, (char *)outbuf, play_samples*4); + g_ao.ao_play(dev, (char *)outbuf, play_samples*4); #endif } } @@ -891,22 +897,22 @@ #define NUM_CHANNELS 2 -void handle_broken_fifo() { +static void handle_broken_fifo() { close(pipe_handle); pipe_handle = -1; } -void init_pipe(char* pipe) { +static void init_pipe(char* pipe) { // make the FIFO and catch the broken pipe signal mknod(pipe, S_IFIFO | 0644, 0); signal(SIGPIPE, handle_broken_fifo); } #ifdef HAS_AO -ao_device *dev; +static ao_device *dev; -void* init_ao() { - ao_initialize(); +static void* init_ao() { + g_ao.ao_initialize(); int driver; #ifndef XBMC @@ -921,7 +927,7 @@ #endif { // otherwise choose the default - driver = ao_default_driver_id(); + driver = g_ao.ao_default_driver_id(); } ao_sample_format fmt; @@ -944,9 +950,9 @@ } #endif - ao_append_option(&ao_opts, "name", "Streaming..."); + g_ao.ao_append_option(&ao_opts, "name", "Streaming..."); - dev = ao_open_live(driver, &fmt, ao_opts); + dev = g_ao.ao_open_live(driver, &fmt, ao_opts); if (dev == NULL) { die("Could not open ao device"); } @@ -955,9 +961,9 @@ } #endif -pthread_t audio_thread; +static pthread_t audio_thread; -int init_output(void) { +static int init_output(void) { void* arg = 0; if (pipename) { @@ -980,17 +986,18 @@ return 0; } -void clean_output(void) +static void clean_output(void) { audio_running = 0; pthread_join(audio_thread, NULL); #ifdef HAS_AO - ao_close(dev); + g_ao.ao_close(dev); #endif } -void hairtunes_cleanup(void) +void __shairport_hairtunes_cleanup(void) { + pthread_cond_signal(&ab_buffer_ready); clean_output(); clean_rtp(); clean_buffer(); diff -Nru libshairport-1.2.0.20310.1/src/hairtunes.h libshairport-1.2.1~git20120110.aeb4987/src/hairtunes.h --- libshairport-1.2.0.20310.1/src/hairtunes.h 2011-08-20 22:06:21.000000000 +0000 +++ libshairport-1.2.1~git20120110.aeb4987/src/hairtunes.h 2012-01-11 04:34:34.000000000 +0000 @@ -1,11 +1,11 @@ #ifndef _HAIRTUNES_H_ #define _HAIRTUNES_H_ -int hairtunes_init(char *pAeskey, char *pAesiv, char *pFmtpstr, int pCtrlPort, int pTimingPort, +int __shairport_hairtunes_init(char *pAeskey, char *pAesiv, char *pFmtpstr, int pCtrlPort, int pTimingPort, int pDataPort, char *pRtpHost, char*pPipeName, char *pLibaoDriver, char *pLibaoDeviceName, char *pLibaoDeviceId); -void hairtunes_setvolume(float vol); -void hairtunes_flush(void); -void hairtunes_cleanup(void); +void __shairport_hairtunes_setvolume(float vol); +void __shairport_hairtunes_flush(void); +void __shairport_hairtunes_cleanup(void); // default buffer size #define BUFFER_FRAMES 320 Binary files /tmp/oYL0Sn27SZ/libshairport-1.2.0.20310.1/src/._Makefile.am and /tmp/Wgyqs1Jfgh/libshairport-1.2.1~git20120110.aeb4987/src/._Makefile.am differ diff -Nru libshairport-1.2.0.20310.1/src/Makefile.am libshairport-1.2.1~git20120110.aeb4987/src/Makefile.am --- libshairport-1.2.0.20310.1/src/Makefile.am 2011-09-23 21:14:39.000000000 +0000 +++ libshairport-1.2.1~git20120110.aeb4987/src/Makefile.am 2012-01-11 04:34:34.000000000 +0000 @@ -1,8 +1,9 @@ lib_LTLIBRARIES=libshairport.la -library_includedir=$(includedir) +library_includedir=$(includedir)/shairport library_include_HEADERS = shairport.h -libshairport_la_SOURCES=shairport.c hairtunes.c socketlib.c alac.c -libshairport_la_LDFLAGS=-dynamiclib +noinst_HEADERS = alac.h hairtunes.h socketlib.h shairport_private.h +libshairport_la_SOURCES=shairport.c hairtunes.c socketlib.c alac.c +libshairport_la_LDFLAGS=-version-info @LIBSHAIRPORT_LIBTOOL_VERSION@ diff -Nru libshairport-1.2.0.20310.1/src/Makefile.in libshairport-1.2.1~git20120110.aeb4987/src/Makefile.in --- libshairport-1.2.0.20310.1/src/Makefile.in 2011-11-10 19:35:57.000000000 +0000 +++ libshairport-1.2.1~git20120110.aeb4987/src/Makefile.in 2012-01-11 04:34:41.000000000 +0000 @@ -36,10 +36,13 @@ build_triplet = @build@ host_triplet = @host@ subdir = src -DIST_COMMON = $(library_include_HEADERS) $(srcdir)/Makefile.am \ - $(srcdir)/Makefile.in +DIST_COMMON = $(library_include_HEADERS) $(noinst_HEADERS) \ + $(srcdir)/Makefile.am $(srcdir)/Makefile.in ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -am__aclocal_m4_deps = $(top_srcdir)/configure.in +am__aclocal_m4_deps = $(top_srcdir)/m4/libtool.m4 \ + $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ + $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ + $(top_srcdir)/configure.in am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) mkinstalldirs = $(install_sh) -d @@ -92,7 +95,7 @@ $(LDFLAGS) -o $@ SOURCES = $(libshairport_la_SOURCES) DIST_SOURCES = $(libshairport_la_SOURCES) -HEADERS = $(library_include_HEADERS) +HEADERS = $(library_include_HEADERS) $(noinst_HEADERS) ETAGS = etags CTAGS = ctags DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) @@ -130,6 +133,7 @@ LDFLAGS = @LDFLAGS@ LIBOBJS = @LIBOBJS@ LIBS = @LIBS@ +LIBSHAIRPORT_LIBTOOL_VERSION = @LIBSHAIRPORT_LIBTOOL_VERSION@ LIBTOOL = @LIBTOOL@ LIPO = @LIPO@ LN_S = @LN_S@ @@ -210,10 +214,11 @@ top_builddir = @top_builddir@ top_srcdir = @top_srcdir@ lib_LTLIBRARIES = libshairport.la -library_includedir = $(includedir) +library_includedir = $(includedir)/shairport library_include_HEADERS = shairport.h +noinst_HEADERS = alac.h hairtunes.h socketlib.h shairport_private.h libshairport_la_SOURCES = shairport.c hairtunes.c socketlib.c alac.c -libshairport_la_LDFLAGS = -dynamiclib +libshairport_la_LDFLAGS = -version-info @LIBSHAIRPORT_LIBTOOL_VERSION@ all: all-am .SUFFIXES: diff -Nru libshairport-1.2.0.20310.1/src/shairport.c libshairport-1.2.1~git20120110.aeb4987/src/shairport.c --- libshairport-1.2.0.20310.1/src/shairport.c 2011-08-20 23:57:56.000000000 +0000 +++ libshairport-1.2.1~git20120110.aeb4987/src/shairport.c 2012-01-11 04:34:34.000000000 +0000 @@ -26,11 +26,42 @@ #define XBMC -#include -#include "socketlib.h" #include "shairport.h" +#include "shairport_private.h" +#include "socketlib.h" #include "hairtunes.h" +#include +#include +#include +#include +#include +#include +#include +#include +#include + +static struct printfPtr g_printf={NULL}; + +int __shairport_xprintf(const char *format, ...) +{ + char dbg[2048]; + va_list args; + va_start(args, format); + vsnprintf(dbg, sizeof(dbg), format, args); + va_end(args); + if(g_printf.extprintf) + { + g_printf.extprintf(dbg, sizeof(dbg)); + } + else + { + printf("%s", dbg); + } + + return 1; +} + #ifndef TRUE #define TRUE (-1) #endif @@ -50,14 +81,14 @@ static char *getTrimmedMalloc(char *pChar, int pSize, int pEndStr, int pAddNL); static char *getTrimmed(char *pChar, int pSize, int pEndStr, int pAddNL, char *pTrimDest); static void initBuffer(struct shairbuffer *pBuf, int pNumChars); -void printBufferInfo(struct shairbuffer *pBuf, int pLevel); +// static void printBufferInfo(struct shairbuffer *pBuf, int pLevel); static void addToShairBuffer(struct shairbuffer *pBuf, char *pNewBuf); static void addNToShairBuffer(struct shairbuffer *pBuf, char *pNewBuf, int pNofNewBuf); static int readDataFromClient(int pSock, struct shairbuffer *pClientBuffer); static int parseMessage(struct connection *pConn, unsigned char *pIpBin, unsigned int pIpBinLen, char *pHWADDR); -static void closePipe(int *pPipe); +// static void closePipe(int *pPipe); static void setKeys(struct keyring *pKeys, char *pIV, char* pAESKey, char *pFmtp); static void initConnection(struct connection *pConn, struct keyring *pKeys, struct comms *pComms, int pSocket, char *pPassword); @@ -68,13 +99,12 @@ #ifdef SIM_INCL static void sim(int pLevel, char *pValue1, char *pValue2); #endif -static void slog(int pLevel, char *pFormat, ...); +// static void slog(int pLevel, char *pFormat, ...); static int isLogEnabledFor(int pLevel); // TEMP -int kCurrentLogLevel = LOG_INFO; -extern int buffer_start_fill; +static int kCurrentLogLevel = LOG_INFO; #ifdef _WIN32 #define DEVNULL "nul" @@ -92,13 +122,26 @@ static char tPassword[56] = ""; static char tHWID[HWID_SIZE] = {0,51,52,53,54,55}; +#ifdef XBMC +struct AudioOutput g_ao; +void shairport_set_ao(struct AudioOutput *ao) +{ + g_ao=*ao; +} + +void shairport_set_printf(struct printfPtr *funcPtr) +{ + g_printf = *funcPtr; +} +#endif + #ifndef XBMC int main(int argc, char **argv) #else int shairport_main(int argc, char **argv) #endif { - printf("initializing shairport\n"); + __shairport_xprintf("initializing shairport\n",NULL); char tHWID_Hex[HWID_SIZE * 2 + 1]; char tKnownHwid[32]; @@ -142,12 +185,12 @@ } else if(!strcmp(arg, "-b")) { - buffer_start_fill = atoi(*++argv); + __shairport_buffer_start_fill = atoi(*++argv); argc--; } else if(!strncmp(arg, "--buffer=", 9)) { - buffer_start_fill = atoi(arg + 9); + __shairport_buffer_start_fill = atoi(arg + 9); } else if(!strncmp(arg, "--mac=", 6)) { @@ -177,22 +220,22 @@ } else if(!strcmp(arg, "-h") || !strcmp(arg, "--help")) { - slog(LOG_INFO, "ShairPort version 0.05 C port - Airport Express emulator\n"); - slog(LOG_INFO, "Usage:\nshairport [OPTION...]\n\nOptions:\n"); - slog(LOG_INFO, " -a, --apname=AirPort Sets Airport name\n"); - slog(LOG_INFO, " -p, --password=secret Sets Password (not working)\n"); - slog(LOG_INFO, " -o, --server_port=5000 Sets Port for Avahi/dns-sd\n"); - slog(LOG_INFO, " -b, --buffer=282 Sets Number of frames to buffer before beginning playback\n"); - slog(LOG_INFO, " -d Daemon mode\n"); - slog(LOG_INFO, " -q, --quiet Supresses all output.\n"); - slog(LOG_INFO, " -v,-v2,-v3,-vv Various debugging levels\n"); - slog(LOG_INFO, "\n"); + __shairport_xprintf("ShairPort version 0.05 C port - Airport Express emulator\n"); + __shairport_xprintf("Usage:\nshairport [OPTION...]\n\nOptions:\n"); + __shairport_xprintf(" -a, --apname=AirPort Sets Airport name\n"); + __shairport_xprintf(" -p, --password=secret Sets Password (not working)\n"); + __shairport_xprintf(" -o, --server_port=5000 Sets Port for Avahi/dns-sd\n"); + __shairport_xprintf(" -b, --buffer=282 Sets Number of frames to buffer before beginning playback\n"); + __shairport_xprintf(" -d Daemon mode\n"); + __shairport_xprintf(" -q, --quiet Supresses all output.\n"); + __shairport_xprintf(" -v,-v2,-v3,-vv Various debugging levels\n"); + __shairport_xprintf("\n"); return 0; } } - if ( buffer_start_fill < 30 || buffer_start_fill > BUFFER_FRAMES ) { - fprintf(stderr, "buffer value must be > 30 and < %d\n", BUFFER_FRAMES); + if ( __shairport_buffer_start_fill < 30 || __shairport_buffer_start_fill > BUFFER_FRAMES ) { + __shairport_xprintf("buffer value must be > 30 and < %d\n", BUFFER_FRAMES); return(0); } @@ -201,11 +244,11 @@ int tPid = fork(); if(tPid < 0) { - exit(1); // Error on fork + //exit(1); // Error on fork } else if(tPid > 0) { - exit(0); + //exit(0); } else { @@ -243,13 +286,15 @@ else { strcpy(tHWID_Hex, tKnownHwid); - sscanf(tHWID_Hex, "%02X%02X%02X%02X%02X%02X", &tHWID[0], &tHWID[1], &tHWID[2], &tHWID[3], &tHWID[4], &tHWID[5]); + sscanf(tHWID_Hex, "%02X%02X%02X%02X%02X%02X", (unsigned *)&tHWID[0], + (unsigned *)&tHWID[1], (unsigned *)&tHWID[2], (unsigned *)&tHWID[3], + (unsigned *)&tHWID[4], (unsigned *)&tHWID[5]); } - slog(LOG_INFO, "LogLevel: %d\n", kCurrentLogLevel); - slog(LOG_INFO, "AirName: %s\n", tServerName); - slog(LOG_INFO, "HWID: %.*s\n", HWID_SIZE, tHWID+1); - slog(LOG_INFO, "HWID_Hex(%d): %s\n", strlen(tHWID_Hex), tHWID_Hex); + __shairport_xprintf("LogLevel: %d\n", kCurrentLogLevel); + __shairport_xprintf("AirName: %s\n", tServerName); + __shairport_xprintf("HWID: %.*s\n", HWID_SIZE, tHWID+1); + __shairport_xprintf("HWID_Hex(%d): %s\n", strlen(tHWID_Hex), tHWID_Hex); if(tSimLevel >= 1) { @@ -263,12 +308,12 @@ #ifndef XBMC startAvahi(tHWID_Hex, tServerName, tPort); #endif - slog(LOG_DEBUG_V, "Starting connection server: specified server port: %d\n", tPort); - tServerSock = setupListenServer(&tAddrInfo, tPort); + __shairport_xprintf("Starting connection server: specified server port: %d\n", tPort); + tServerSock = __shairport_setupListenServer(&tAddrInfo, tPort); if(tServerSock < 0) { freeaddrinfo(tAddrInfo); - slog(LOG_INFO, "Error setting up server socket on port %d, try specifying a different port\n", tPort); + __shairport_xprintf("Error setting up server socket on port %d, try specifying a different port\n", tPort); return 0; } @@ -295,7 +340,7 @@ int readsock; - slog(LOG_DEBUG_V, "Waiting for clients to connect\n"); + __shairport_xprintf("Waiting for clients to connect\n"); while(m_running) { @@ -317,7 +362,7 @@ if (readsock == -1) continue; - tClientSock = acceptClient(tServerSock, tAddrInfo); + tClientSock = __shairport_acceptClient(tServerSock, tAddrInfo); if(tClientSock > 0) { #ifndef XBMC @@ -327,7 +372,7 @@ { freeaddrinfo(tAddrInfo); tAddrInfo = NULL; - slog(LOG_DEBUG, "...Accepted Client Connection..\n"); + __shairport_xprintf("...Accepted Client Connection..\n"); close(tServerSock); handleClient(tClientSock, tPassword, tHWID); //close(tClientSock); @@ -335,11 +380,11 @@ } else { - slog(LOG_DEBUG_VV, "Child now busy handling new client\n"); + __shairport_xprintf("Child now busy handling new client\n"); close(tClientSock); } #else - slog(LOG_DEBUG, "...Accepted Client Connection..\n"); + __shairport_xprintf("...Accepted Client Connection..\n"); handleClient(tClientSock, tPassword, tHWID); #endif } @@ -349,7 +394,7 @@ } } - slog(LOG_DEBUG_VV, "Finished\n"); + __shairport_xprintf("Finished\n"); if(tAddrInfo != NULL) { freeaddrinfo(tAddrInfo); @@ -360,6 +405,7 @@ void shairport_exit(void) { m_running = 0; + close(tServerSock); } int shairport_is_running(void) @@ -367,7 +413,7 @@ return m_running; } -int findEnd(char *tReadBuf) +static int findEnd(char *tReadBuf) { // find \n\n, \r\n\r\n, or \r\r is found int tIdx = 0; @@ -405,9 +451,9 @@ return -1; } -void handleClient(int pSock, char *pPassword, char *pHWADDR) +static void handleClient(int pSock, char *pPassword, char *pHWADDR) { - slog(LOG_DEBUG_VV, "In Handle Client\n"); + __shairport_xprintf("In Handle Client\n"); fflush(stdout); socklen_t len; @@ -426,7 +472,7 @@ // deal with both IPv4 and IPv6: if (addr.ss_family == AF_INET) { - slog(LOG_DEBUG_V, "Constructing ipv4 address\n"); + __shairport_xprintf("Constructing ipv4 address\n"); struct sockaddr_in *s = (struct sockaddr_in *)&addr; port = ntohs(s->sin_port); inet_ntop(AF_INET, &s->sin_addr, ipstr, sizeof ipstr); @@ -446,20 +492,20 @@ if(memcmp(&addr.bin[0], "\x00\x00\x00\x00" "\x00\x00\x00\x00" "\x00\x00\xff\xff", 12) == 0) { // its ipv4... - slog(LOG_DEBUG_V, "Constructing ipv4 from ipv6 address\n"); + __shairport_xprintf("Constructing ipv4 from ipv6 address\n"); memcpy(ipbin, &addr.bin[12], 4); ipbinlen = 4; } else { - slog(LOG_DEBUG_V, "Constructing ipv6 address\n"); + __shairport_xprintf("Constructing ipv6 address\n"); memcpy(ipbin, &s->sin6_addr, 16); ipbinlen = 16; } } - slog(LOG_DEBUG_V, "Peer IP address: %s\n", ipstr); - slog(LOG_DEBUG_V, "Peer port : %d\n", port); + __shairport_xprintf("Peer IP address: %s\n", ipstr); + __shairport_xprintf("Peer port : %d\n", port); int tMoreDataNeeded = 1; struct keyring tKeys; @@ -480,16 +526,16 @@ tError = readDataFromClient(pSock, &(tConn.recv)); if(!tError && strlen(tConn.recv.data) > 0) { - slog(LOG_DEBUG_VV, "Finished Reading some data from client\n"); + __shairport_xprintf("Finished Reading some data from client\n"); // parse client request tMoreDataNeeded = parseMessage(&tConn, ipbin, ipbinlen, pHWADDR); if(1 == tMoreDataNeeded) { - slog(LOG_DEBUG_VV, "\n\nNeed to read more data\n"); + __shairport_xprintf("\n\nNeed to read more data\n"); } else if(-1 == tMoreDataNeeded) // Forked process down below ended. { - slog(LOG_DEBUG_V, "Forked Process ended...cleaning up\n"); + __shairport_xprintf("Forked Process ended...cleaning up\n"); cleanup(&tConn); // pSock was already closed return; @@ -498,13 +544,13 @@ } else { - slog(LOG_DEBUG, "Error reading from socket, closing client\n"); + __shairport_xprintf("Error reading from socket, closing client\n"); // Error reading data....quit. cleanup(&tConn); return; } } - slog(LOG_DEBUG_VV, "Writing: %d chars to socket\n", tConn.resp.current); + __shairport_xprintf("Writing: %d chars to socket\n", tConn.resp.current); //tConn->resp.data[tConn->resp.current-1] = '\0'; writeDataToClient(pSock, &(tConn.resp)); // Finished reading one message... @@ -515,14 +561,14 @@ } -void writeDataToClient(int pSock, struct shairbuffer *pResponse) +static void writeDataToClient(int pSock, struct shairbuffer *pResponse) { - slog(LOG_DEBUG_VV, "\n----Beg Send Response Header----\n%.*s\n", pResponse->current, pResponse->data); + __shairport_xprintf("\n----Beg Send Response Header----\n%.*s\n", pResponse->current, pResponse->data); send(pSock, pResponse->data, pResponse->current,0); - slog(LOG_DEBUG_VV, "----Send Response Header----\n"); + __shairport_xprintf("----Send Response Header----\n"); } -int readDataFromClient(int pSock, struct shairbuffer *pClientBuffer) +static int readDataFromClient(int pSock, struct shairbuffer *pClientBuffer) { char tReadBuf[MAX_SIZE]; strcpy(tReadBuf, ""); @@ -532,7 +578,7 @@ while(tRetval > 0 && tEnd < 0) { // Read from socket until \n\n, \r\n\r\n, or \r\r is found - slog(LOG_DEBUG_V, "Waiting To Read...\n"); + __shairport_xprintf("Waiting To Read...\n"); fflush(stdout); tRetval = read(pSock, tReadBuf, MAX_SIZE); // if new buffer contains the end of request string, only copy partial buffer? @@ -543,40 +589,40 @@ { pClientBuffer->marker = tEnd+1; // Marks start of content } - slog(SOCKET_LOG_LEVEL, "Found end of http request at: %d\n", tEnd); + __shairport_xprintf("Found end of http request at: %d\n", tEnd); fflush(stdout); } else { tEnd = MAX_SIZE; - slog(SOCKET_LOG_LEVEL, "Read %d of data so far\n%s\n", tRetval, tReadBuf); + __shairport_xprintf("Read %d of data so far\n%s\n", tRetval, tReadBuf); fflush(stdout); } if(tRetval > 0) { // Copy read data into tReceive; - slog(SOCKET_LOG_LEVEL, "Read %d data, using %d of it\n", tRetval, tEnd); + __shairport_xprintf("Read %d data, using %d of it\n", tRetval, tEnd); addNToShairBuffer(pClientBuffer, tReadBuf, tRetval); - slog(LOG_DEBUG_VV, "Finished copying data\n"); + __shairport_xprintf("Finished copying data\n"); } else { - slog(LOG_DEBUG, "Error reading data from socket, got: %d bytes", tRetval); + __shairport_xprintf("Error reading data from socket, got: %d bytes", tRetval); return tRetval; } } if(tEnd + 1 != tRetval) { - slog(SOCKET_LOG_LEVEL, "Read more data after end of http request. %d instead of %d\n", tRetval, tEnd+1); + __shairport_xprintf("Read more data after end of http request. %d instead of %d\n", tRetval, tEnd+1); } - slog(SOCKET_LOG_LEVEL, "Finished Reading Data:\n%s\nEndOfData\n", pClientBuffer->data); + __shairport_xprintf("Finished Reading Data:\n%s\nEndOfData\n", pClientBuffer->data); fflush(stdout); return 0; } -char *getFromBuffer(char *pBufferPtr, const char *pField, int pLenAfterField, int *pReturnSize, char *pDelims) +static char *getFromBuffer(char *pBufferPtr, const char *pField, int pLenAfterField, int *pReturnSize, char *pDelims) { - slog(LOG_DEBUG_V, "GettingFromBuffer: %s\n", pField); + __shairport_xprintf("GettingFromBuffer: %s\n", pField); char* tFound = strstr(pBufferPtr, pField); int tSize = 0; if(tFound != NULL) @@ -597,7 +643,7 @@ } tSize = (int) (tShortest - tFound); - slog(LOG_DEBUG_VV, "Found %.*s length: %d\n", tSize, tFound, tSize); + __shairport_xprintf("Found %.*s length: %d\n", tSize, tFound, tSize); if(pReturnSize != NULL) { *pReturnSize = tSize; @@ -605,30 +651,30 @@ } else { - slog(LOG_DEBUG_V, "Not Found\n"); + __shairport_xprintf("Not Found\n"); } return tFound; } -char *getFromHeader(char *pHeaderPtr, const char *pField, int *pReturnSize) +static char *getFromHeader(char *pHeaderPtr, const char *pField, int *pReturnSize) { return getFromBuffer(pHeaderPtr, pField, 2, pReturnSize, "\r\n"); } -char *getFromContent(char *pContentPtr, const char* pField, int *pReturnSize) +static char *getFromContent(char *pContentPtr, const char* pField, int *pReturnSize) { return getFromBuffer(pContentPtr, pField, 1, pReturnSize, "\r\n"); } -char *getFromSetup(char *pContentPtr, const char* pField, int *pReturnSize) +static char *getFromSetup(char *pContentPtr, const char* pField, int *pReturnSize) { return getFromBuffer(pContentPtr, pField, 1, pReturnSize, ";\r\n"); } // Handles compiling the Apple-Challenge, HWID, and Server IP Address // Into the response the airplay client is expecting. -int buildAppleResponse(struct connection *pConn, unsigned char *pIpBin, unsigned int pIpBinLen, char *pHWID) +static int buildAppleResponse(struct connection *pConn, unsigned char *pIpBin, unsigned int pIpBinLen, char *pHWID) { // Find Apple-Challenge char *tResponse = NULL; @@ -639,10 +685,10 @@ { char tTrim[tFoundSize + 2]; getTrimmed(tFound, tFoundSize, TRUE, TRUE, tTrim); - slog(LOG_DEBUG_VV, "HeaderChallenge: [%s] len: %d sizeFound: %d\n", tTrim, strlen(tTrim), tFoundSize); + __shairport_xprintf("HeaderChallenge: [%s] len: %d sizeFound: %d\n", tTrim, strlen(tTrim), tFoundSize); int tChallengeDecodeSize = 16; - char *tChallenge = decode_base64((unsigned char *)tTrim, tFoundSize, &tChallengeDecodeSize); - slog(LOG_DEBUG_VV, "Challenge Decode size: %d expected 16\n", tChallengeDecodeSize); + char *tChallenge = __shairport_decode_base64((unsigned char *)tTrim, tFoundSize, &tChallengeDecodeSize); + __shairport_xprintf("Challenge Decode size: %d expected 16\n", tChallengeDecodeSize); int tCurSize = 0; unsigned char tChalResp[38]; @@ -663,8 +709,8 @@ tCurSize += tPad; } - char *tTmp = encode_base64((unsigned char *)tChalResp, tCurSize); - slog(LOG_DEBUG_VV, "Full sig: %s\n", tTmp); + char *tTmp = __shairport_encode_base64((unsigned char *)tChalResp, tCurSize); + __shairport_xprintf("Full sig: %s\n", tTmp); free(tTmp); // RSA Encrypt @@ -674,7 +720,7 @@ RSA_private_encrypt(tCurSize, (unsigned char *)tChalResp, tTo, rsa, RSA_PKCS1_PADDING); // Wrap RSA Encrypted binary in Base64 encoding - tResponse = encode_base64(tTo, tSize); + tResponse = __shairport_encode_base64(tTo, tSize); int tLen = strlen(tResponse); while(tLen > 1 && tResponse[tLen-1] == '=') { @@ -697,7 +743,7 @@ } //parseMessage(tConn->recv.data, tConn->recv.mark, &tConn->resp, ipstr, pHWADDR, tConn->keys); -int parseMessage(struct connection *pConn, unsigned char *pIpBin, unsigned int pIpBinLen, char *pHWID) +static int parseMessage(struct connection *pConn, unsigned char *pIpBin, unsigned int pIpBinLen, char *pHWID) { int tReturn = 0; // 0 = good, 1 = Needs More Data, -1 = close client socket. if(pConn->resp.data == NULL) @@ -708,15 +754,15 @@ char *tContent = getFromHeader(pConn->recv.data, "Content-Length", NULL); if(tContent != NULL) { - int tContentSize = atoi(tContent); + unsigned int tContentSize = atoi(tContent); if(pConn->recv.marker == 0 || strlen(pConn->recv.data+pConn->recv.marker) != tContentSize) { if(isLogEnabledFor(HEADER_LOG_LEVEL)) { - slog(HEADER_LOG_LEVEL, "Content-Length: %s value -> %d\n", tContent, tContentSize); + __shairport_xprintf("Content-Length: %s value -> %d\n", tContent, tContentSize); if(pConn->recv.marker != 0) { - slog(HEADER_LOG_LEVEL, "ContentPtr has %d, but needs %d\n", + __shairport_xprintf("ContentPtr has %d, but needs %d\n", strlen(pConn->recv.data+pConn->recv.marker), tContentSize); } } @@ -726,7 +772,7 @@ } else { - slog(LOG_DEBUG_VV, "No content, header only\n"); + __shairport_xprintf("No content, header only\n"); } // "Creates" a new Response Header for our response message @@ -739,7 +785,7 @@ { tLen = 20; } - slog(LOG_INFO, "********** RECV %.*s **********\n", tLen, pConn->recv.data); + __shairport_xprintf("********** RECV %.*s **********\n", tLen, pConn->recv.data); } if(pConn->password != NULL) @@ -749,7 +795,7 @@ if(buildAppleResponse(pConn, pIpBin, pIpBinLen, pHWID)) // need to free sig { - slog(LOG_DEBUG_V, "Added AppleResponse to Apple-Challenge request\n"); + __shairport_xprintf("Added AppleResponse to Apple-Challenge request\n"); } // Find option, then based on option, do different actions. @@ -769,23 +815,23 @@ int tKeySize = 0; char tEncodedAesIV[tSize + 2]; getTrimmed(tHeaderVal, tSize, TRUE, TRUE, tEncodedAesIV); - slog(LOG_DEBUG_VV, "AESIV: [%.*s] Size: %d Strlen: %d\n", tSize, tEncodedAesIV, tSize, strlen(tEncodedAesIV)); - char *tDecodedIV = decode_base64((unsigned char*) tEncodedAesIV, tSize, &tSize); + __shairport_xprintf("AESIV: [%.*s] Size: %d Strlen: %d\n", tSize, tEncodedAesIV, tSize, strlen(tEncodedAesIV)); + char *tDecodedIV = __shairport_decode_base64((unsigned char*) tEncodedAesIV, tSize, &tSize); // grab the key, copy it out of the receive buffer tHeaderVal = getFromContent(tContent, "a=rsaaeskey", &tKeySize); char tEncodedAesKey[tKeySize + 2]; // +1 for nl, +1 for \0 getTrimmed(tHeaderVal, tKeySize, TRUE, TRUE, tEncodedAesKey); - slog(LOG_DEBUG_VV, "AES KEY: [%s] Size: %d Strlen: %d\n", tEncodedAesKey, tKeySize, strlen(tEncodedAesKey)); + __shairport_xprintf("AES KEY: [%s] Size: %d Strlen: %d\n", tEncodedAesKey, tKeySize, strlen(tEncodedAesKey)); // remove base64 coding from key - char *tDecodedAesKey = decode_base64((unsigned char*) tEncodedAesKey, + char *tDecodedAesKey = __shairport_decode_base64((unsigned char*) tEncodedAesKey, tKeySize, &tKeySize); // Need to free DecodedAesKey // Grab the formats int tFmtpSize = 0; char *tFmtp = getFromContent(tContent, "a=fmtp", &tFmtpSize); // Don't need to free tFmtp = getTrimmedMalloc(tFmtp, tFmtpSize, TRUE, FALSE); // will need to free - slog(LOG_DEBUG_VV, "Format: %s\n", tFmtp); + __shairport_xprintf("Format: %s\n", tFmtp); RSA *rsa = loadKey(); // Decrypt the binary aes key @@ -794,11 +840,11 @@ if(RSA_private_decrypt(tKeySize, (unsigned char *)tDecodedAesKey, (unsigned char*) tDecryptedKey, rsa, RSA_PKCS1_OAEP_PADDING) >= 0) { - slog(LOG_DEBUG, "Decrypted AES key from RSA Successfully\n"); + __shairport_xprintf("Decrypted AES key from RSA Successfully\n"); } else { - slog(LOG_INFO, "Error Decrypting AES key from RSA\n"); + __shairport_xprintf("Error Decrypting AES key from RSA\n"); } free(tDecodedAesKey); RSA_free(rsa); @@ -814,13 +860,13 @@ // struct comms *tComms = pConn->hairtunes; // if (! (pipe(tComms->in) == 0 && pipe(tComms->out) == 0)) // { -// slog(LOG_INFO, "Error setting up hairtunes communications...some things probably wont work very well.\n"); +// __shairport_xprintf("Error setting up hairtunes communications...some things probably wont work very well.\n"); // } // Setup fork char tPort[8] = "6000"; // get this from dup()'d stdout of child pid - printf("******** SETUP!!!!!\n"); + __shairport_xprintf("******** SETUP!!!!!\n",NULL); #ifndef XBMC int tPid = fork(); if(tPid == 0) @@ -836,11 +882,11 @@ tFound = getFromSetup(pConn->recv.data, "timing_port", &tSize); getTrimmed(tFound, tSize, 1, 0, tTPortStr); - slog(LOG_DEBUG_VV, "converting %s and %s from str->int\n", tCPortStr, tTPortStr); + __shairport_xprintf("converting %s and %s from str->int\n", tCPortStr, tTPortStr); int tControlport = atoi(tCPortStr); int tTimingport = atoi(tTPortStr); - slog(LOG_DEBUG_V, "Got %d for CPort and %d for TPort\n", tControlport, tTimingport); + __shairport_xprintf("Got %d for CPort and %d for TPort\n", tControlport, tTimingport); char *tRtp = NULL; char *tPipe = NULL; char *tAoDriver = NULL; @@ -871,11 +917,11 @@ } cleanupBuffers(pConn); #endif - hairtunes_init(tKeys->aeskey, tKeys->aesiv, tKeys->fmt, tControlport, tTimingport, + __shairport_hairtunes_init(tKeys->aeskey, tKeys->aesiv, tKeys->fmt, tControlport, tTimingport, tDataport, tRtp, tPipe, tAoDriver, tAoDeviceName, tAoDeviceId); #ifndef XBMC // Quit when finished. - slog(LOG_DEBUG, "Returned from hairtunes init....returning -1, should close out this whole side of the fork\n"); + __shairport_xprintf("Returned from hairtunes init....returning -1, should close out this whole side of the fork\n"); return -1; } else if(tPid >0) @@ -888,7 +934,7 @@ int tRead = read(tComms->out[0], tFromHairtunes, 80); if(tRead <= 0) { - slog(LOG_INFO, "Error reading port from hairtunes function, assuming default port: %d\n", tPort); + __shairport_xprintf("Error reading port from hairtunes function, assuming default port: %d\n", tPort); } else { @@ -900,7 +946,7 @@ } else { - slog(LOG_INFO, "Read %d bytes, Error translating %s into a port\n", tRead, tFromHairtunes); + __shairport_xprintf("Read %d bytes, Error translating %s into a port\n", tRead, tFromHairtunes); } } @@ -921,7 +967,7 @@ } else { - slog(LOG_INFO, "Error forking process....dere' be errors round here.\n"); + __shairport_xprintf("Error forking process....dere' be errors round here.\n"); return -1; } #endif @@ -933,9 +979,9 @@ propogateCSeq(pConn); #ifndef XBMC close(pConn->hairtunes->in[1]); - slog(LOG_DEBUG, "Tearing down connection, closing pipes\n"); + __shairport_xprintf("Tearing down connection, closing pipes\n"); #else - hairtunes_cleanup(); + __shairport_hairtunes_cleanup(); #endif //close(pConn->hairtunes->out[0]); tReturn = -1; // Close client socket, but sends an ACK/OK packet first @@ -946,7 +992,7 @@ #ifndef XBMC write(pConn->hairtunes->in[1], "flush\n", 6); #else - hairtunes_flush(); + __shairport_hairtunes_flush(); #endif propogateCSeq(pConn); } @@ -955,20 +1001,20 @@ propogateCSeq(pConn); int tSize = 0; char *tVol = getFromHeader(pConn->recv.data, "volume", &tSize); - slog(LOG_DEBUG_VV, "About to write [vol: %.*s] data to hairtunes\n", tSize, tVol); + __shairport_xprintf("About to write [vol: %.*s] data to hairtunes\n", tSize, tVol); // TBD VOLUME #ifndef XBMC write(pConn->hairtunes->in[1], "vol: ", 5); write(pConn->hairtunes->in[1], tVol, tSize); write(pConn->hairtunes->in[1], "\n", 1); #else - hairtunes_setvolume(atof(tVol)); + __shairport_hairtunes_setvolume(atof(tVol)); #endif - slog(LOG_DEBUG_VV, "Finished writing data write data to hairtunes\n"); + __shairport_xprintf("Finished writing data write data to hairtunes\n"); } else { - slog(LOG_DEBUG, "\n\nUn-Handled recv: %s\n", pConn->recv.data); + __shairport_xprintf("\n\nUn-Handled recv: %s\n", pConn->recv.data); propogateCSeq(pConn); } addToShairBuffer(&(pConn->resp), "\r\n"); @@ -976,7 +1022,7 @@ } // Copies CSeq value from request, and adds standard header values in. -void propogateCSeq(struct connection *pConn) //char *pRecvBuffer, struct shairbuffer *pConn->recp.data) +static void propogateCSeq(struct connection *pConn) //char *pRecvBuffer, struct shairbuffer *pConn->recp.data) { int tSize=0; char *tRecPtr = getFromHeader(pConn->recv.data, "CSeq", &tSize); @@ -986,7 +1032,7 @@ addToShairBuffer(&(pConn->resp), "\r\n"); } -void cleanupBuffers(struct connection *pConn) +static void cleanupBuffers(struct connection *pConn) { if(pConn->recv.data != NULL) { @@ -1000,7 +1046,7 @@ } } -void cleanup(struct connection *pConn) +static void cleanup(struct connection *pConn) { cleanupBuffers(pConn); // TBD CLEANUP @@ -1038,7 +1084,7 @@ } #ifndef XBMC -int startAvahi(const char *pHWStr, const char *pServerName, int pPort) +static int startAvahi(const char *pHWStr, const char *pServerName, int pPort) { int tMaxServerName = 25; // Something reasonable? iPad showed 21, iphone 25 int tPid = fork(); @@ -1047,7 +1093,7 @@ char tName[100 + HWID_SIZE + 3]; if(strlen(pServerName) > tMaxServerName) { - slog(LOG_INFO,"Hey dog, we see you like long server names, " + __shairport_xprintf("Hey dog, we see you like long server names, " "so we put a strncat in our command so we don't buffer overflow, while you listen to your flow.\n" "We just used the first %d characters. Pick something shorter if you want\n", tMaxServerName); } @@ -1058,7 +1104,7 @@ strcat(tName, pHWStr); strcat(tName, "@"); strncat(tName, pServerName, tMaxServerName); - slog(AVAHI_LOG_LEVEL, "Avahi/DNS-SD Name: %s\n", tName); + __shairport_xprintf("Avahi/DNS-SD Name: %s\n", tName); execlp("avahi-publish-service", "avahi-publish-service", tName, "_raop._tcp", tPort, "tp=UDP","sm=false","sv=false","ek=1","et=0,1", @@ -1070,33 +1116,33 @@ perror("error"); } - slog(LOG_INFO, "Bad error... couldn't find or failed to run: avahi-publish-service OR dns-sd\n"); - exit(1); + __shairport_xprintf("Bad error... couldn't find or failed to run: avahi-publish-service OR dns-sd\n"); + //exit(1); } else { - slog(LOG_DEBUG_VV, "Avahi/DNS-SD started on PID: %d\n", tPid); + __shairport_xprintf("Avahi/DNS-SD started on PID: %d\n", tPid); } return tPid; } #endif -void printBufferInfo(struct shairbuffer *pBuf, int pLevel) -{ - slog(pLevel, "Buffer: [%s] size: %d maxchars:%d\n", pBuf->data, pBuf->current, pBuf->maxsize/sizeof(char)); -} +// static void printBufferInfo(struct shairbuffer *pBuf, int pLevel) +// { +// __shairport_xprintf("Buffer: [%s] size: %d maxchars:%d\n", pBuf->data, pBuf->current, pBuf->maxsize/sizeof(char)); +// } -int getAvailChars(struct shairbuffer *pBuf) +static int getAvailChars(struct shairbuffer *pBuf) { return (pBuf->maxsize / sizeof(char)) - pBuf->current; } -void addToShairBuffer(struct shairbuffer *pBuf, char *pNewBuf) +static void addToShairBuffer(struct shairbuffer *pBuf, char *pNewBuf) { addNToShairBuffer(pBuf, pNewBuf, strlen(pNewBuf)); } -void addNToShairBuffer(struct shairbuffer *pBuf, char *pNewBuf, int pNofNewBuf) +static void addNToShairBuffer(struct shairbuffer *pBuf, char *pNewBuf, int pNofNewBuf) { int tAvailChars = getAvailChars(pBuf); if(pNofNewBuf > tAvailChars) @@ -1120,7 +1166,7 @@ } } -char *getTrimmedMalloc(char *pChar, int pSize, int pEndStr, int pAddNL) +static char *getTrimmedMalloc(char *pChar, int pSize, int pEndStr, int pAddNL) { int tAdditionalSize = 0; if(pEndStr) @@ -1132,7 +1178,7 @@ } // Must free returned ptr -char *getTrimmed(char *pChar, int pSize, int pEndStr, int pAddNL, char *pTrimDest) +static char *getTrimmed(char *pChar, int pSize, int pEndStr, int pAddNL, char *pTrimDest) { int tSize = pSize; if(pEndStr) @@ -1157,20 +1203,21 @@ return pTrimDest; } -void slog(int pLevel, char *pFormat, ...) -{ - //#ifdef SHAIRPORT_LOG - //if(isLogEnabledFor(pLevel)) - { - va_list argp; - va_start(argp, pFormat); - vprintf(pFormat, argp); - va_end(argp); - } - //#endif -} +// static void slog(int pLevel, char *pFormat, ...) +// { +// //#ifdef SHAIRPORT_LOG +// //if(isLogEnabledFor(pLevel)) +// { +// va_list argp; +// va_start(argp, pFormat); +// __shairport_xprintf(pFormat, argp); +// //vprintf(pFormat, argp); +// va_end(argp); +// } +// //#endif +// } -int isLogEnabledFor(int pLevel) +static int isLogEnabledFor(int pLevel) { if(pLevel <= kCurrentLogLevel) { @@ -1179,11 +1226,13 @@ return FALSE; } -void initConnection(struct connection *pConn, struct keyring *pKeys, +static void initConnection(struct connection *pConn, struct keyring *pKeys, struct comms *pComms, int pSocket, char *pPassword) { #ifndef XBMC pConn->hairtunes = pComms; +#else + (void)pComms; #endif if(pKeys != NULL) { @@ -1205,22 +1254,22 @@ } } -void closePipe(int *pPipe) -{ - if(*pPipe != -1) - { - close(*pPipe); - *pPipe = -1; - } -} +// static void closePipe(int *pPipe) +// { +// if(*pPipe != -1) +// { +// close(*pPipe); +// *pPipe = -1; +// } +// } -void initBuffer(struct shairbuffer *pBuf, int pNumChars) +static void initBuffer(struct shairbuffer *pBuf, int pNumChars) { if(pBuf->data != NULL) { - slog(LOG_DEBUG_VV, "Hrm, buffer wasn't cleaned up....trying to free\n"); + __shairport_xprintf("Hrm, buffer wasn't cleaned up....trying to free\n"); free(pBuf->data); - slog(LOG_DEBUG_VV, "Free didn't seem to seg fault....huzzah\n"); + __shairport_xprintf("Free didn't seem to seg fault....huzzah\n"); } pBuf->current = 0; pBuf->marker = 0; @@ -1229,7 +1278,7 @@ memset(pBuf->data, 0, pBuf->maxsize); } -void setKeys(struct keyring *pKeys, char *pIV, char* pAESKey, char *pFmtp) +static void setKeys(struct keyring *pKeys, char *pIV, char* pAESKey, char *pFmtp) { if(pKeys->aesiv != NULL) { @@ -1273,11 +1322,11 @@ "2gG0N5hvJpzwwhbhXqFKA4zaaSrw622wDniAK5MlIE0tIAKKP4yxNGjoD2QYjhBGuhvkWKaXTyY=\n" \ "-----END RSA PRIVATE KEY-----" -RSA *loadKey() +static RSA *loadKey() { BIO *tBio = BIO_new_mem_buf(AIRPORT_PRIVATE_KEY, -1); RSA *rsa = PEM_read_bio_RSAPrivateKey(tBio, NULL, NULL, NULL); //NULL, NULL, NULL); BIO_free(tBio); - slog(RSA_LOG_LEVEL, "RSA Key: %d\n", RSA_check_key(rsa)); + __shairport_xprintf("RSA Key: %d\n", RSA_check_key(rsa)); return rsa; } diff -Nru libshairport-1.2.0.20310.1/src/shairport.h libshairport-1.2.1~git20120110.aeb4987/src/shairport.h --- libshairport-1.2.0.20310.1/src/shairport.h 2011-08-20 23:58:11.000000000 +0000 +++ libshairport-1.2.1~git20120110.aeb4987/src/shairport.h 2012-01-11 04:34:34.000000000 +0000 @@ -1,24 +1,23 @@ #ifndef __SHAIRPORT_H__ #define __SHAIRPORT_H__ -#include -#include -#include -#include -#include -#include -#include "socketlib.h" -#include -#include -#include +#include +#include #define HWID_SIZE 6 #define SHAIRPORT_LOG 1 -#define LOG_INFO 1 -#define LOG_DEBUG 5 -#define LOG_DEBUG_V 6 -#define LOG_DEBUG_VV 7 + +#ifndef LOG_INFO +#define LOG_INFO 5 +#endif + +#ifndef LOG_DEBUG +#define LOG_DEBUG 6 +#endif + +#define LOG_DEBUG_V 7 +#define LOG_DEBUG_VV 8 struct shairbuffer { @@ -58,13 +57,34 @@ { #endif /* __cplusplus */ +struct printfPtr +{ + int (*extprintf)(const char* msg, size_t msgSize); +}; + +struct AudioOutput +{ + void (*ao_initialize)(void); + int (*ao_play)(ao_device *, char *, uint32_t); + int (*ao_default_driver_id)(void); + ao_device* (*ao_open_live)( int, ao_sample_format *, ao_option *); + int (*ao_close)(ao_device *); + /* -- Device Setup/Playback/Teardown -- */ + int (*ao_append_option)(ao_option **, const char *, const char *); + void (*ao_free_options)(ao_option *); + char* (*ao_get_option)(ao_option *, const char* ); +}; + int shairport_main(int argc, char **argv); void shairport_exit(void); int shairport_loop(void); int shairport_is_running(void); +void shairport_set_ao(struct AudioOutput *ao); +void shairport_set_printf(struct printfPtr *funcPtr); #ifdef __cplusplus } #endif /* __cplusplus */ #endif + diff -Nru libshairport-1.2.0.20310.1/src/shairport_private.h libshairport-1.2.1~git20120110.aeb4987/src/shairport_private.h --- libshairport-1.2.0.20310.1/src/shairport_private.h 1970-01-01 00:00:00.000000000 +0000 +++ libshairport-1.2.1~git20120110.aeb4987/src/shairport_private.h 2012-01-11 04:34:34.000000000 +0000 @@ -0,0 +1,7 @@ +#ifndef __SHAIRPORT_PRIVATE_H__ +#define __SHAIRPORT_PRIVATE_H__ + +int __shairport_xprintf(const char *format, ...); +extern int __shairport_buffer_start_fill; + +#endif Binary files /tmp/oYL0Sn27SZ/libshairport-1.2.0.20310.1/src/._socketlib.c and /tmp/Wgyqs1Jfgh/libshairport-1.2.1~git20120110.aeb4987/src/._socketlib.c differ diff -Nru libshairport-1.2.0.20310.1/src/socketlib.c libshairport-1.2.1~git20120110.aeb4987/src/socketlib.c --- libshairport-1.2.0.20310.1/src/socketlib.c 2011-09-23 20:00:48.000000000 +0000 +++ libshairport-1.2.1~git20120110.aeb4987/src/socketlib.c 2012-01-11 04:34:34.000000000 +0000 @@ -25,8 +25,10 @@ */ -#include +#include "shairport_private.h" #include "socketlib.h" + +#include #include #include #include @@ -39,7 +41,7 @@ #include #include -int common_setup(struct addrinfo *pAddrInfo) +static int common_setup(struct addrinfo *pAddrInfo) { int tSock; //printAddrs(pAddrInfo); @@ -48,7 +50,7 @@ if((tSock==-1) && (pAddrInfo->ai_family == AF_INET6) && (errno == EAFNOSUPPORT)) { //Fallback to ipv4 - perror("Failed to create ipv6 socket. Trying ipv4"); + __shairport_xprintf("Failed to create ipv6 socket. Trying ipv4"); pAddrInfo->ai_family = AF_INET; tSock = socket(pAddrInfo->ai_family, pAddrInfo->ai_socktype, 0); } @@ -56,7 +58,7 @@ return tSock; } -int setup_client(struct addrinfo *server_host) +int __shairport_setup_client(struct addrinfo *server_host) { int tSockDesc = -1; int tIdx = 0; @@ -79,14 +81,14 @@ close(tSockDesc); perror("Error: Could not connect to server"); struct timeval tRes; - delay(RETRY_DELAY, &tRes); + __shairport_delay(RETRY_DELAY, &tRes); } } - printf("%d Retry attempts exceeded\n", RETRY_COUNT); + __shairport_xprintf("%d Retry attempts exceeded\n", RETRY_COUNT); return ERROR; } -int getAddr(char *pHostname, char *pService, int pFamily, int pSockType, struct addrinfo **pAddrInfo) +int __shairport_getAddr(char *pHostname, char *pService, int pFamily, int pSockType, struct addrinfo **pAddrInfo) { struct addrinfo hints; int tError = 0; @@ -102,12 +104,12 @@ tError = getaddrinfo(pHostname, pService, &hints, pAddrInfo); if(tError != 0) { - printf("Error getting address info\n"); + __shairport_xprintf("Error getting address info\n"); } return tError; } -int setup_server(struct addrinfo *server_addr) +int __shairport_setup_server(struct addrinfo *server_addr) { int tSock = common_setup(server_addr); if (tSock < 0) @@ -136,7 +138,7 @@ } -int acceptClient(int pSock, struct addrinfo *server_addr) +int __shairport_acceptClient(int pSock, struct addrinfo *server_addr) { int tAccept = accept(pSock, server_addr->ai_addr, &server_addr->ai_addrlen); // close the listen socket. Not expecting any more clients. @@ -152,23 +154,23 @@ return tAccept; } -int setupListenServer(struct addrinfo **pAddrInfo, int pPort) +int __shairport_setupListenServer(struct addrinfo **pAddrInfo, int pPort) { char tService[SERVLEN]; sprintf(tService, "%d", pPort); // copies port to string int tFamily = AF_INET; #ifdef AF_INET6 - //printf("Listening on IPv6 Socket\n"); - //tFamily = AF_INET6; + __shairport_xprintf("Listening on IPv6 Socket\n"); + tFamily = AF_INET6; #else //printf("Listening on IPv4 Socket"); #endif - if(getAddr(NULL, tService, tFamily, SOCK_STREAM, pAddrInfo)) + if(__shairport_getAddr(NULL, tService, tFamily, SOCK_STREAM, pAddrInfo)) { - return ERROR; // getAddr prints out error message + return ERROR; // __shairport_getAddr prints out error message } - int tSocketDescriptor = setup_server(*pAddrInfo); + int tSocketDescriptor = __shairport_setup_server(*pAddrInfo); char tAddr[INET6_ADDRSTRLEN]; socklen_t tSize = INET6_ADDRSTRLEN; inet_ntop((*pAddrInfo)->ai_family, (*pAddrInfo)->ai_addr, tAddr, tSize); @@ -176,7 +178,7 @@ return tSocketDescriptor; } -void delay(long pMillisecs, struct timeval *pRes) +void __shairport_delay(long pMillisecs, struct timeval *pRes) { pRes->tv_sec = pMillisecs / 1000; pRes->tv_usec = (pMillisecs - (pRes->tv_sec * 1000)) * 1000; @@ -200,7 +202,7 @@ else { // Invalid encoded data, no other cases are possible. - printf("Unrecoverable error....base64 values are incorrectly encoded\n"); + __shairport_xprintf("Unrecoverable error....base64 values are incorrectly encoded\n"); return pSize; } } @@ -209,12 +211,12 @@ //int main(int argc, char **argv) //{ -// char *output = decode_base64("WU9ZTyEA\n\0", strlen("WU9ZTyEA\n\0")); +// char *output = __shairport_decode_base64("WU9ZTyEA\n\0", strlen("WU9ZTyEA\n\0")); // printf("Unbase64: *%s*\n", output); // free(output);/ //} -char *decode_base64(unsigned char *pInput, int pLength, int *pActualLength) +char *__shairport_decode_base64(unsigned char *pInput, int pLength, int *pActualLength) { // Needs All NO_NL flags for proper RSA AES KEY Descrypt BIO *b64, *bmem; @@ -226,7 +228,7 @@ memset(input, 0, length); memcpy(input, pInput, pLength); memset(input+pLength, '=', length-pLength); - printf("Fixed value: [%.*s]\n", length, input); + __shairport_xprintf("Fixed value: [%.*s]\n", length, input); } char *buffer = (char *)malloc(length); memset(buffer, 0, length); @@ -251,7 +253,7 @@ return buffer; } -char *encode_base64(unsigned char *input, int length) +char *__shairport_encode_base64(unsigned char *input, int length) { BIO *bmem, *b64; BUF_MEM *bptr; diff -Nru libshairport-1.2.0.20310.1/src/socketlib.h libshairport-1.2.1~git20120110.aeb4987/src/socketlib.h --- libshairport-1.2.0.20310.1/src/socketlib.h 2011-08-20 22:06:21.000000000 +0000 +++ libshairport-1.2.1~git20120110.aeb4987/src/socketlib.h 2012-01-11 04:34:34.000000000 +0000 @@ -23,17 +23,17 @@ #define DEFAULT_IP "127.0.0.1" #define DEFAULT_UNIX "/unix" -int setup_client(struct addrinfo *server_info); -int setup_server(struct addrinfo *server_address); -int setupListenServer(struct addrinfo **pAddrInfo, int pPort); -int acceptClient(int pSock, struct addrinfo *server_addr); -void delay(long pMillisecs, struct timeval *pRes); -int getAddr(char *pHostname, char *pService, int pFamily, int pSockType, struct addrinfo **pAddrInfo); +int __shairport_setup_client(struct addrinfo *server_info); +int __shairport_setup_server(struct addrinfo *server_address); +int __shairport_setupListenServer(struct addrinfo **pAddrInfo, int pPort); +int __shairport_acceptClient(int pSock, struct addrinfo *server_addr); +void __shairport_delay(long pMillisecs, struct timeval *pRes); +int __shairport_getAddr(char *pHostname, char *pService, int pFamily, int pSockType, struct addrinfo **pAddrInfo); // All calls to decode and encode need to be freed -char *decode_base64(unsigned char *input, int length, int *tActualLength); +char *__shairport_decode_base64(unsigned char *input, int length, int *tActualLength); // All calls to decode and encode need to be freed -char *encode_base64(unsigned char *input, int length); +char *__shairport_encode_base64(unsigned char *input, int length); #endif