feisty crashes with an error of apparmor

hi,
my feisty begun to crash from some day with a report of an error of apparmor.
i've installed no new drivers but gnome extension.
i don't understand the problem (i'm an old user of linux but not a debugger and a new user for gnome and Ubuntu).
here's the dmesg:
guido@guido-desktop:~$ dmesg
[ 0.000000] Linux version 2.6.22-14-generic (buildd@palmer) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Sun Oct 14 23:05:12 GMT 2007 (Ubuntu 2.6.22-14.46-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
[ 0.000000] BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
[ 0.000000] 127MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] found SMP MP-table at 000f5d70
[ 0.000000] Entering add_active_range(0, 0, 262128) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 229376
[ 0.000000] HighMem 229376 -> 262128
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 262128
[ 0.000000] On node 0 totalpages: 262128
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1760 pages used for memmap
[ 0.000000] Normal zone: 223520 pages, LIFO batch:31
[ 0.000000] HighMem zone: 255 pages used for memmap
[ 0.000000] HighMem zone: 32497 pages, LIFO batch:7
[ 0.000000] DMI 2.2 present.
[ 0.000000] ACPI: RSDP signature @ 0xC00F7850 checksum 0
[ 0.000000] ACPI: RSDP 000F7850, 0014 (r0 VKT400)
[ 0.000000] ACPI: RSDT 3FFF3000, 002C (r1 VKT400 AWRDACPI 42302E31 AWRD 0)
[ 0.000000] ACPI: FACP 3FFF3040, 0074 (r1 VKT400 AWRDACPI 42302E31 AWRD 0)
[ 0.000000] ACPI: DSDT 3FFF30C0, 3E74 (r1 VKT400 AWRDACPI 1000 MSFT 100000D)
[ 0.000000] ACPI: FACS 3FFF0000, 0040
[ 0.000000] ACPI: APIC 3FFF6F40, 0054 (r1 VKT400 AWRDACPI 42302E31 AWRD 0)
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 6:6 APIC version 16
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 dfl dfl)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000)
[ 0.000000] Built 1 zonelists. Total pages: 260081
[ 0.000000] Kernel command line: root=UUID=c4267e35-9d64-4717-843f-97d928ad1e02 ro quiet splash
[ 0.000000] mapped APIC to ffffd000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffc000 (fec00000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Detected 1735.604 MHz processor.
[ 20.664925] Console: colour VGA+ 80x25
[ 20.665832] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 20.667270] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 20.705947] Memory: 1027624k/1048512k available (2015k kernel code, 20216k reserved, 916k data, 364k init, 131008k highmem)
[ 20.705960] virtual kernel memory layout:
[ 20.705961] fixmap : 0xfff4d000 - 0xfffff000 ( 712 kB)
[ 20.705963] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 20.705964] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
[ 20.705966] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 20.705967] .init : 0xc03e3000 - 0xc043e000 ( 364 kB)
[ 20.705969] .data : 0xc02f7d26 - 0xc03dce84 ( 916 kB)
[ 20.705970] .text : 0xc0100000 - 0xc02f7d26 (2015 kB)
[ 20.705975] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 20.706031] SLUB: Genslabs=22, HWalign=32, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
[ 20.785921] Calibrating delay using timer specific routine.. 3474.52 BogoMIPS (lpj=6949054)
[ 20.785965] Security Framework v1.0.0 initialized
[ 20.785976] SELinux: Disabled at boot.
[ 20.785997] Mount-cache hash table entries: 512
[ 20.786189] CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000
[ 20.786201] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 20.786204] CPU: L2 Cache: 256K (64 bytes/line)
[ 20.786208] CPU: After all inits, caps: 0383fbff c1c3fbff 00000000 00000420 00000000 00000000 00000000
[ 20.786223] Compat vDSO mapped to ffffe000.
[ 20.786241] Checking 'hlt' instruction... OK.
[ 20.802084] SMP alternatives: switching to UP code
[ 20.802420] Freeing SMP alternatives: 11k freed
[ 20.802848] Early unpacking initramfs... done
[ 21.177629] ACPI: Core revision 20070126
[ 21.177743] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[ 21.274135] CPU0: AMD Athlon(tm) XP 2100+ stepping 02
[ 21.274165] Total of 1 processors activated (3474.52 BogoMIPS).
[ 21.274920] ENABLING IO-APIC IRQs
[ 21.275227] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 21.420898] Brought up 1 CPUs
[ 21.421085] Booting paravirtualized kernel on bare hardware
[ 21.421173] Time: 15:59:39 Date: 10/25/107
[ 21.421210] NET: Registered protocol family 16
[ 21.421330] EISA bus registered
[ 21.421347] ACPI: bus type pci registered
[ 21.429989] PCI: PCI BIOS revision 2.10 entry at 0xfb660, last bus=1
[ 21.429992] PCI: Using configuration type 1
[ 21.429994] Setting up standard PCI resources
[ 21.438662] ACPI: EC: Look up EC in DSDT
[ 21.442871] ACPI: Interpreter enabled
[ 21.442875] ACPI: (supports S0 S1 S4 S5)
[ 21.442893] ACPI: Using IOAPIC for interrupt routing
[ 21.448754] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 21.448769] PCI: Probing PCI hardware (bus 00)
[ 21.449340] PCI quirk: region 4000-407f claimed by vt8235 PM
[ 21.449344] PCI quirk: region 5000-500f claimed by vt8235 SMB
[ 21.449701] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 21.471309] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
[ 21.471465] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 *5 6 7 10 11 12 14 15)
[ 21.471619] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 *5 6 7 10 11 12 14 15)
[ 21.471771] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
[ 21.471921] ACPI: PCI Interrupt Link [ALKA] (IRQs 20) *0
[ 21.472066] ACPI: PCI Interrupt Link [ALKB] (IRQs 21) *0
[ 21.472229] ACPI: PCI Interrupt Link [ALKC] (IRQs 22) *0
[ 21.472372] ACPI: PCI Interrupt Link [ALKD] (IRQs 23) *0
[ 21.472471] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 21.472487] pnp: PnP ACPI init
[ 21.472506] ACPI: bus type pnp registered
[ 21.476214] pnp: PnP ACPI: found 15 devices
[ 21.476217] ACPI: ACPI bus type pnp unregistered
[ 21.476222] PnPBIOS: Disabled by ACPI PNP
[ 21.476291] PCI: Using ACPI for IRQ routing
[ 21.476295] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 21.505160] NET: Registered protocol family 8
[ 21.505163] NET: Registered protocol family 20
[ 21.505266] pnp: 00:00: iomem range 0xf0000-0xf3fff could not be reserved
[ 21.505270] pnp: 00:00: iomem range 0xf4000-0xf7fff could not be reserved
[ 21.505273] pnp: 00:00: iomem range 0xf8000-0xfbfff could not be reserved
[ 21.505276] pnp: 00:00: iomem range 0xfc000-0xfffff could not be reserved
[ 21.508696] Time: tsc clocksource has been installed.
[ 21.535607] PCI: Bridge: 0000:00:01.0
[ 21.535611] IO window: c000-cfff
[ 21.535617] MEM window: e8000000-e80fffff
[ 21.535622] PREFETCH window: d8000000-e7ffffff
[ 21.535642] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 21.535657] NET: Registered protocol family 2
[ 21.572656] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 21.572898] TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
[ 21.575879] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 21.576890] TCP: Hash tables configured (established 131072 bind 65536)
[ 21.576895] TCP reno registered
[ 21.588736] checking if image is initramfs... it is
[ 22.035812] Switched to high resolution mode on CPU 0
[ 22.299009] Freeing initrd memory: 7350k freed
[ 22.299558] audit: initializing netlink socket (disabled)
[ 22.299576] audit(1196006379.108:1): initialized
[ 22.299660] highmem bounce pool size: 64 pages
[ 22.301861] VFS: Disk quotas dquot_6.5.1
[ 22.301927] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 22.302049] io scheduler noop registered
[ 22.302052] io scheduler anticipatory registered
[ 22.302054] io scheduler deadline registered
[ 22.302070] io scheduler cfq registered (default)
[ 22.302085] PCI: VIA PCI bridge detected. Disabling DAC.
[ 22.302149] Boot video device is 0000:01:00.0
[ 22.302353] isapnp: Scanning for PnP cards...
[ 22.655776] isapnp: No Plug & Play device found
[ 22.692915] Real Time Clock Driver v1.12ac
[ 22.693037] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 22.693147] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 22.693481] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 22.694400] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 22.694891] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 22.695898] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 22.696171] input: Macintosh mouse button emulation as /class/input/input0
[ 22.696273] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 22.696641] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 22.696648] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 22.696841] mice: PS/2 mouse device common for all mice
[ 22.696977] EISA: Probing bus 0 at eisa.0
[ 22.697001] Cannot allocate resource for EISA slot 4
[ 22.697004] Cannot allocate resource for EISA slot 5
[ 22.697018] EISA: Detected 0 cards.
[ 22.697230] TCP cubic registered
[ 22.697242] NET: Registered protocol family 1
[ 22.697266] Using IPI No-Shortcut mode
[ 22.697480] Magic number: 15:941:993
[ 22.697497] hash matches device ttyd6
[ 22.698247] Freeing unused kernel memory: 364k freed
[ 22.734664] input: AT Translated Set 2 keyboard as /class/input/input1
[ 23.951710] AppArmor: AppArmor initialized<5>audit(1196006380.608:2): type=1505 info="AppArmor initialized" pid=1191
[ 23.959594] fuse init (API version 7.8)
[ 23.965559] Failure registering capabilities with primary security module.
[ 23.981064] ACPI: Fan [FAN] (on)
[ 23.986635] ACPI: CPU0 (power states: C1[C1] C2[C2])
[ 23.986642] ACPI: Processor [CPU0] (supports 2 throttling states)
[ 23.988054] ACPI: Thermal Zone [THRM] (41 C)
[ 24.825987] usbcore: registered new interface driver usbfs
[ 24.826021] usbcore: registered new interface driver hub
[ 24.826061] usbcore: registered new device driver usb
[ 24.827173] USB Universal Host Controller Interface driver v3.0
[ 24.827584] ACPI: PCI Interrupt Link [ALKB] BIOS reported IRQ 0, using IRQ 21
[ 24.827588] ACPI: PCI Interrupt Link [ALKB] enabled at IRQ 21
[ 24.827598] ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 16
[ 24.827613] uhci_hcd 0000:00:10.0: UHCI Host Controller
[ 24.827821] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
[ 24.827858] uhci_hcd 0000:00:10.0: irq 16, io base 0x0000d000
[ 24.828041] usb usb1: configuration #1 chosen from 1 choice
[ 24.828077] hub 1-0:1.0: USB hub found
[ 24.828089] hub 1-0:1.0: 2 ports detected
[ 24.890394] SCSI subsystem initialized
[ 24.896500] libata version 2.21 loaded.
[ 24.930935] ACPI: PCI Interrupt 0000:00:10.1[B] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 16
[ 24.930954] uhci_hcd 0000:00:10.1: UHCI Host Controller
[ 24.930988] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
[ 24.931014] uhci_hcd 0000:00:10.1: irq 16, io base 0x0000d400
[ 24.931147] usb usb2: configuration #1 chosen from 1 choice
[ 24.931185] hub 2-0:1.0: USB hub found
[ 24.931196] hub 2-0:1.0: 2 ports detected
[ 24.960591] via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker
[ 24.960600] via-rhine: Broken BIOS detected, avoid_D3 enabled.
[ 25.034736] ACPI: PCI Interrupt 0000:00:10.2[C] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 16
[ 25.034755] uhci_hcd 0000:00:10.2: UHCI Host Controller
[ 25.034786] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
[ 25.034815] uhci_hcd 0000:00:10.2: irq 16, io base 0x0000d800
[ 25.034946] usb usb3: configuration #1 chosen from 1 choice
[ 25.034983] hub 3-0:1.0: USB hub found
[ 25.034996] hub 3-0:1.0: 2 ports detected
[ 25.090081] Floppy drive(s): fd0 is 1.44M
[ 25.118449] FDC 0 is a post-1991 82077
[ 25.140700] ACPI: PCI Interrupt 0000:00:0b.0[A] -> GSI 18 (level, low) -> IRQ 17
[ 25.190500] usb 1-1: new full speed USB device using uhci_hcd and address 2
[ 25.192660] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17] MMIO=[e8102000-e81027ff] Max Packet=[2048] IR/IT contexts=[4/4]
[ 25.200120] ACPI: PCI Interrupt 0000:00:10.3[D] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 16
[ 25.200147] ehci_hcd 0000:00:10.3: EHCI Host Controller
[ 25.200194] ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4
[ 25.200260] ehci_hcd 0000:00:10.3: irq 16, io mem 0xe8103000
[ 4.412000] Marking TSC unstable due to: possible TSC halt in C2.
[ 4.416000] Time: acpi_pm clocksource has been installed.
[ 4.416000] ehci_hcd 0000:00:10.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 4.416000] usb usb4: configuration #1 chosen from 1 choice
[ 4.416000] hub 4-0:1.0: USB hub found
[ 4.416000] hub 4-0:1.0: 6 ports detected
[ 4.524000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 4.524000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 4.528000] VP_IDE: IDE controller at PCI slot 0000:00:11.1
[ 4.528000] ACPI: PCI Interrupt Link [ALKA] BIOS reported IRQ 0, using IRQ 20
[ 4.528000] ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 20
[ 4.528000] ACPI: PCI Interrupt 0000:00:11.1[A] -> Link [ALKA] -> GSI 20 (level, low) -> IRQ 18
[ 4.528000] VP_IDE: chipset revision 6
[ 4.528000] VP_IDE: not 100% native mode: will probe irqs later
[ 4.528000] VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci0000:00:11.1
[ 4.528000] ide0: BM-DMA at 0xdc00-0xdc07, BIOS settings: hda:DMA, hdb:pio
[ 4.528000] ide1: BM-DMA at 0xdc08-0xdc0f, BIOS settings: hdc:DMA, hdd:DMA
[ 4.528000] Probing IDE interface ide0...
[ 4.824000] usb 1-1: device not accepting address 2, error -71
[ 4.944000] hda: Maxtor 6Y060L0, ATA DISK drive
[ 5.576000] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00004c010700219c]
[ 5.616000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 5.632000] Probing IDE interface ide1...
[ 6.240000] usb 4-3: new high speed USB device using ehci_hcd and address 4
[ 6.372000] usb 4-3: configuration #1 chosen from 1 choice
[ 6.496000] hdc: SAMSUNG DVD-ROM SD-616Q, ATAPI CD/DVD-ROM drive
[ 6.612000] usbcore: registered new interface driver libusual
[ 6.616000] Initializing USB Mass Storage driver...
[ 6.852000] usb 1-1: new full speed USB device using uhci_hcd and address 4
[ 7.060000] usb 1-1: configuration #1 chosen from 1 choice
[ 7.280000] hdd: PIONEER DVD RW DVR-107D, ATAPI CD/DVD-ROM drive
[ 7.304000] usb 1-2: new full speed USB device using uhci_hcd and address 5
[ 7.336000] ide1 at 0x170-0x177,0x376 on irq 15
[ 7.336000] ACPI: PCI Interrupt Link [ALKD] BIOS reported IRQ 0, using IRQ 23
[ 7.336000] ACPI: PCI Interrupt Link [ALKD] enabled at IRQ 23
[ 7.336000] ACPI: PCI Interrupt 0000:00:12.0[A] -> Link [ALKD] -> GSI 23 (level, low) -> IRQ 19
[ 7.340000] eth0: VIA Rhine II at 0x1e400, 00:30:1b:1d:7c:d5, IRQ 19.
[ 7.344000] eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link 0021.
[ 7.352000] hda: max request size: 128KiB
[ 7.372000] hda: 120103200 sectors (61492 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(133)
[ 7.372000] hda: cache flushes supported
[ 7.372000] hda: hda1 hda2 < hda5 >
[ 7.416000] hdc: ATAPI 48X DVD-ROM drive, 512kB Cache, UDMA(33)
[ 7.416000] Uniform CD-ROM driver Revision: 3.20
[ 7.428000] hdd: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2000kB Cache, UDMA(33)
[ 7.612000] Attempting manual resume
[ 7.612000] swsusp: Resume From Partition 3:5
[ 7.612000] PM: Checking swsusp image.
[ 7.612000] PM: Resume from disk failed.
[ 7.632000] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 7.632000] EXT3-fs: write access will be enabled during recovery.
[ 9.320000] kjournald starting. Commit interval 5 seconds
[ 9.320000] EXT3-fs: hda1: orphan cleanup on readonly fs
[ 9.320000] ext3_orphan_cleanup: deleting unreferenced inode 1406472
[ 9.320000] EXT3-fs: hda1: 1 orphan inode deleted
[ 9.320000] EXT3-fs: recovery complete.
[ 9.340000] EXT3-fs: mounted filesystem with ordered data mode.
[ 10.172000] usb 1-2: configuration #1 chosen from 1 choice
[ 10.416000] usb 2-2: new full speed USB device using uhci_hcd and address 2
[ 10.604000] usb 2-2: configuration #1 chosen from 1 choice
[ 10.608000] scsi0 : SCSI emulation for USB Mass Storage devices
[ 10.608000] usb-storage: device found at 4
[ 10.608000] usb-storage: waiting for device to settle before scanning
[ 10.608000] usbcore: registered new interface driver usb-storage
[ 10.608000] USB Mass Storage support registered.
[ 15.608000] usb-storage: device scan complete
[ 15.608000] scsi 0:0:0:0: Direct-Access TOSHIBA 3.5"- HDD 1.05 PQ: 0 ANSI: 0
[ 17.524000] Linux agpgart interface v0.102 (c) Dave Jones
[ 17.540000] agpgart: Detected VIA KT400/KT400A/KT600 chipset
[ 17.548000] agpgart: AGP aperture is 128M @ 0xd0000000
[ 17.556000] Linux video capture interface: v2.00
[ 17.636000] bttv: driver version 0.9.17 loaded
[ 17.636000] bttv: using 8 buffers with 2080k (520 pages) each for capture
[ 17.636000] bttv: Bt8xx card found (0).
[ 17.636000] ACPI: PCI Interrupt 0000:00:09.0[A] -> GSI 16 (level, low) -> IRQ 20
[ 17.636000] bttv0: Bt878 (rev 17) at 0000:00:09.0, irq: 20, latency: 32, mmio: 0xe8100000
[ 17.636000] bttv0: detected: Pinnacle PCTV [card=39], PCI subsystem ID is 11bd:0012
[ 17.636000] bttv0: using: Pinnacle PCTV Studio/Rave [card=39,autodetected]
[ 17.636000] bttv0: gpio: en=00000000, out=00000000 in=00ffffff [init]
[ 17.636000] bttv0: i2c: checking for MSP34xx @ 0x80... <6>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 17.840000] not found
[ 17.840000] bttv0: pinnacle/mt: id=1 info="PAL / mono" radio=no
[ 17.840000] bttv0: using tuner=33
[ 17.840000] bttv0: i2c: checking for MSP34xx @ 0x80... not found
[ 18.536000] bttv0: i2c: checking for TDA9875 @ 0xb0... <6>/build/buildd/linux-source-2.6.22-2.6.22/drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 4 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0027
[ 18.548000] usbcore: registered new interface driver usblp
[ 18.548000] /build/buildd/linux-source-2.6.22-2.6.22/drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
[ 19.036000] input: PC Speaker as /class/input/input2
[ 19.040000] not found
[ 19.040000] bttv0: i2c: checking for TDA7432 @ 0x8a... not found
[ 19.416000] sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
[ 19.424000] sd 0:0:0:0: [sda] Write Protect is off
[ 19.424000] sd 0:0:0:0: [sda] Mode Sense: 23 00 00 00
[ 19.424000] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ 19.432000] sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
[ 19.444000] sd 0:0:0:0: [sda] Write Protect is off
[ 19.444000] sd 0:0:0:0: [sda] Mode Sense: 23 00 00 00
[ 19.444000] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ 19.444000] sda: sda1 < sda5 >
[ 19.472000] sd 0:0:0:0: [sda] Attached SCSI disk
[ 19.488000] usbcore: registered new interface driver snd-usb-audio
[ 19.520000] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 19.548000] input: ImPS/2 Logitech Wheel Mouse as /class/input/input3
[ 19.552000] parport_pc 00:0a: reported by Plug and Play ACPI
[ 19.552000] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 19.744000] tuner 0-0043: chip found @ 0x86 (bt878 #0 [sw])
[ 19.744000] tda9887 0-0043: tda988[5/6/7] found @ 0x43 (tuner)
[ 19.828000] tuner 0-0060: Chip ID is not zero. It is not a TEA5767
[ 19.828000] tuner 0-0060: chip found @ 0xc0 (bt878 #0 [sw])
[ 19.828000] tuner 0-0060: microtune: companycode=4d54 part=04 rev=04
[ 19.876000] tuner 0-0060: microtune MT2032 found, OK
[ 19.880000] tuner 0-0060: microtune: companycode=4d54 part=04 rev=04
[ 19.924000] tuner 0-0060: microtune MT2032 found, OK
[ 19.944000] bttv0: registered device video0
[ 19.944000] bttv0: registered device vbi0
[ 19.944000] bttv0: PLL: 28636363 => 35468950 .. ok
[ 19.984000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 19.988000] ACPI: PCI Interrupt Link [ALKC] BIOS reported IRQ 0, using IRQ 22
[ 19.988000] ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 22
[ 19.988000] ACPI: PCI Interrupt 0000:00:11.5[C] -> Link [ALKC] -> GSI 22 (level, low) -> IRQ 21
[ 19.988000] PCI: Setting latency timer of device 0000:00:11.5 to 64
[ 20.028000] bt878: AUDIO driver version 0.0.0 loaded
[ 20.068000] irda_init()
[ 20.068000] NET: Registered protocol family 23
[ 20.528000] bt878: Bt878 AUDIO function found (0).
[ 20.528000] ACPI: PCI Interrupt 0000:00:09.1[A] -> GSI 16 (level, low) -> IRQ 20
[ 20.528000] bt878_probe: card id=[0x1211bd], Unknown card.
[ 20.528000] Exiting..
[ 20.528000] ACPI: PCI interrupt for device 0000:00:09.1 disabled
[ 20.528000] bt878: probe of 0000:00:09.1 failed with error -22
[ 21.264000] lp0: using parport0 (interrupt-driven).
[ 21.340000] Adding 2498068k swap on /dev/hda5. Priority:-1 extents:1 across:2498068k
[ 21.568000] EXT3 FS on hda1, internal journal
[ 22.656000] No dock devices found.
[ 22.872000] input: Power Button (FF) as /class/input/input4
[ 22.880000] ACPI: Power Button (FF) [PWRF]
[ 22.924000] input: Power Button (CM) as /class/input/input5
[ 22.928000] ACPI: Power Button (CM) [PWRB]
[ 22.972000] input: Sleep Button (CM) as /class/input/input6
[ 22.976000] ACPI: Sleep Button (CM) [SLPB]
[ 24.384000] ppdev: user-space parallel port driver
[ 24.584000] eth0: link up, 10Mbps, half-duplex, lpa 0x0021
[ 24.648000] audit(1196006403.262:3): type=1503 operation="inode_permission" requested_mask="a" denied_mask="a" name="/dev/tty" pid=4838 profile="/usr/sbin/cupsd"
[ 24.740000] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
[ 24.740000] apm: overridden by ACPI.
[ 25.096000] Failure registering capabilities with primary security module.

ProblemType: Bug
Architecture: i386
Date: Sun Nov 25 17:05:10 2007
DistroRelease: Ubuntu 7.10
ExecutablePath: /usr/bin/gnome-system-log
Package: gnome-utils 2.20.0.1-0ubuntu1
PackageArchitecture: i386
ProcCmdline: gnome-system-log
ProcCwd: /home/guido
ProcEnviron:
 PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games
 LANG=it_IT.UTF-8
 SHELL=/bin/bash
SourcePackage: gnome-utils
Uname: Linux guido-desktop 2.6.22-14-generic #1 SMP Sun Oct 14 23:05:12 GMT 2007 i686 GNU/Linux