SRU: Fix kernel xhci hang when resume from S3

This bug is missing log files that will aid in diagnosing the problem. While running an Ubuntu kernel (not a mainline or third-party kernel) please enter the following command in a terminal window:

apport-collect 1805344

and then change the status of the bug to 'Confirmed'.

If, due to the nature of the issue you have encountered, you are unable to run this command, please add a comment stating that fact and change the bug status to 'Confirmed'.

This change has been made by an automated script, maintained by the Ubuntu Kernel Team.

This bug is awaiting verification that the kernel in -proposed solves the problem. Please test the kernel and update this bug with the results. If the problem is solved, change the tag 'verification-needed-bionic' to 'verification-done-bionic'. If the problem still exists, change the tag 'verification-needed-bionic' to 'verification-failed-bionic'.

If verification is not done by 5 working days from today, this fix will be dropped from the source code, and this bug will be closed.

See https://wiki.ubuntu.com/Testing/EnableProposed for documentation how to enable and use -proposed. Thank you!

Suspend/Resume good for 30 times with kernel linux-image-4.15.0-1029-oem.

This bug was fixed in the package linux - 4.15.0-44.47

---------------
linux (4.15.0-44.47) bionic; urgency=medium

  * linux: 4.15.0-44.47 -proposed tracker (LP: #1811419)

  * Packaging resync (LP: #1786013)
    - [Packaging] update helper scripts

  * CPU hard lockup with rigorous writes to NVMe drive (LP: #1810998)
    - blk-wbt: pass in enum wbt_flags to get_rq_wait()
    - blk-wbt: Avoid lock contention and thundering herd issue in wbt_wait
    - blk-wbt: move disable check into get_limit()
    - blk-wbt: use wq_has_sleeper() for wq active check
    - blk-wbt: fix has-sleeper queueing check
    - blk-wbt: abstract out end IO completion handler
    - blk-wbt: improve waking of tasks

  * To reduce the Realtek USB cardreader power consumption (LP: #1811337)
    - mmc: sdhci: Disable 1.8v modes (HS200/HS400/UHS) if controller can't support
      1.8v
    - mmc: core: Introduce MMC_CAP_SYNC_RUNTIME_PM
    - mmc: rtsx_usb_sdmmc: Don't runtime resume the device while changing led
    - mmc: rtsx_usb: Use MMC_CAP2_NO_SDIO
    - mmc: rtsx_usb: Enable MMC_CAP_ERASE to allow erase/discard/trim requests
    - mmc: rtsx_usb_sdmmc: Re-work runtime PM support
    - mmc: rtsx_usb_sdmmc: Re-work card detection/removal support
    - memstick: rtsx_usb_ms: Add missing pm_runtime_disable() in probe function
    - misc: rtsx_usb: Use USB remote wakeup signaling for card insertion detection
    - memstick: Prevent memstick host from getting runtime suspended during card
      detection
    - memstick: rtsx_usb_ms: Use ms_dev() helper
    - memstick: rtsx_usb_ms: Support runtime power management

  * Support non-strict iommu mode on arm64 (LP: #1806488)
    - iommu/io-pgtable-arm: Fix race handling in split_blk_unmap()
    - iommu/arm-smmu-v3: Implement flush_iotlb_all hook
    - iommu/dma: Add support for non-strict mode
    - iommu: Add "iommu.strict" command line option
    - iommu/io-pgtable-arm: Add support for non-strict mode
    - iommu/arm-smmu-v3: Add support for non-strict mode
    - iommu/io-pgtable-arm-v7s: Add support for non-strict mode
    - iommu/arm-smmu: Support non-strict mode

  * ELAN900C:00 04F3:2844 touchscreen doesn't work (LP: #1811335)
    - pinctrl: cannonlake: Fix community ordering for H variant
    - pinctrl: cannonlake: Fix HOSTSW_OWN register offset of H variant

  * Add Cavium ThunderX2 SoC UNCORE PMU driver (LP: #1811200)
    - perf: Export perf_event_update_userpage
    - Documentation: perf: Add documentation for ThunderX2 PMU uncore driver
    - drivers/perf: Add Cavium ThunderX2 SoC UNCORE PMU driver
    - [Config] New config CONFIG_THUNDERX2_PMU=m

  * Update hisilicon SoC-specific drivers (LP: #1810457)
    - SAUCE: Revert "net: hns3: Updates RX packet info fetch in case of multi BD"
    - Revert "UBUNTU: SAUCE: {topost} net: hns3: separate roce from nic when
      resetting"
    - Revert "UBUNTU: SAUCE: {topost} net: hns3: Use roce handle when calling roce
      callback function"
    - Revert "UBUNTU: SAUCE: {topost} net: hns3: Add calling roce callback
      function when link status change"
    - Revert "UBUNTU: SAUCE: {topost} net: hns3: optimize the process of notifying
      roce client"
    - Revert "UBUNTU: S...