XEN dom0 crashes

After dom0 running a while (different time periods) with 2 domU's this happens;

***screen message***

Mar 20 13:35:01 HKLX00 /USR/SBIN/CRON[8710]: (root) CMD (/etc/webmin/status/monitor.pl)
Mar 20 13:35:08 HKLX00 kernel: [105653.808100] BUG: unable to handle kernel NULL pointer dereference at virtual address 00000040
Mar 20 13:35:08 HKLX00 kernel: [105653.808180] printing eip:
Mar 20 13:35:08 HKLX00 kernel: [105653.808205] c01e92a8
Mar 20 13:35:08 HKLX00 kernel: [105653.808207] 27c4f000 -> *pde = 00000001:07e74001
Mar 20 13:35:08 HKLX00 kernel: [105653.808236] 27c74000 -> *pme = 00000000:00000000
Mar 20 13:35:08 HKLX00 kernel: [105653.808265] Oops: 0000 [#1]

***root@HKLX00:~# uname -a***
Linux HKLX00 2.6.22-14-xen #1 SMP Tue Feb 12 09:27:26 UTC 2008 i686 GNU/Linux

DISTRIB_ID=Ubuntu
DISTRIB_RELEASE=7.10
DISTRIB_CODENAME=gutsy
DISTRIB_DESCRIPTION="Ubuntu 7.10"

***dmesg***
[ 0.000000] Linux version 2.6.22-14-xen (buildd@terranova) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu

4.1.2-16ubuntu2)) #1 SMP Tue Feb 12 09:27:26 UTC 2008 (Unofficial)
[ 0.000000] Reserving virtual address space above 0xf5800000
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] Xen: 0000000000000000 - 00000000f5831000 (usable)
[ 0.000000] 3200MB HIGHMEM available.
[ 0.000000] 728MB LOWMEM available.
[ 0.000000] NX (Execute Disable) protection: active
[ 0.497207] Entering add_active_range(0, 0, 1005617) 0 entries of 256 used
[ 0.497212] Zone PFN ranges:
[ 0.497213] DMA 0 -> 186368
[ 0.497215] Normal 186368 -> 186368
[ 0.497216] HighMem 186368 -> 1005617
[ 0.497217] early_node_map[1] active PFN ranges
[ 0.497219] 0: 0 -> 1005617
[ 0.497221] On node 0 totalpages: 1005617
[ 0.507967] DMA zone: 1456 pages used for memmap
[ 0.507970] DMA zone: 0 pages reserved
[ 0.507972] DMA zone: 184912 pages, LIFO batch:31
[ 0.512316] Normal zone: 0 pages used for memmap
[ 0.512318] HighMem zone: 6400 pages used for memmap
[ 0.512321] HighMem zone: 812849 pages, LIFO batch:31
[ 0.531406] found SMP MP-table at 000fe710
[ 0.535602] DMI 2.5 present.
[ 0.537900] ACPI: RSDP 000F2AC0, 0024 (r2 DELL )
[ 0.537911] ACPI: XSDT 000F2B48, 00A4 (r1 DELL PE_SC3 1 DELL 1)
[ 0.537920] ACPI: FACP 000F2C60, 00F4 (r3 DELL PE_SC3 1 DELL 1)
[ 0.537929] ACPI: DSDT CFEC8000, 2545 (r1 DELL PE_SC3 1 INTL 20050624)
[ 0.537936] ACPI: FACS CFEE7C00, 0040
[ 0.537940] ACPI: APIC 000F2D54, 0072 (r1 DELL PE_SC3 1 DELL 1)
[ 0.537946] ACPI: SPCR 000F2DD3, 0050 (r1 DELL PE_SC3 1 DELL 1)
[ 0.537951] ACPI: HPET 000F2E23, 0038 (r1 DELL PE_SC3 1 DELL 1)
[ 0.537956] ACPI: MCFG 000F2E5B, 003C (r1 DELL PE_SC3 1 DELL 1)
[ 0.537962] ACPI: WD__ 000F2E97, 0134 (r1 DELL PE_SC3 1 DELL 1)
[ 0.537967] ACPI: SLIC 000F2FCB, 0024 (r1 DELL PE_SC3 1 DELL 1)
[ 0.537972] ACPI: ERST CFECBA00, 0210 (r1 DELL PE_SC3 1 DELL 1)
[ 0.537978] ACPI: HEST CFECBC10, 027C (r1 DELL PE_SC3 1 DELL 1)
[ 0.537983] ACPI: BERT CFECB880, 0030 (r1 DELL PE_SC3 1 DELL 1)
[ 0.537989] ACPI: EINJ CFECB8B0, 0150 (r1 DELL PE_SC3 1 DELL 1)
[ 0.537994] ACPI: SSDT CFECA545, 0224 (r1 DELL PE_SC3 11 INTL 20050624)
[ 0.538000] ACPI: SSDT CFECA9BB, 0224 (r1 DELL PE_SC3 11 INTL 20050624)
[ 0.538006] ACPI: SSDT CFECAE31, 0224 (r1 DELL PE_SC3 11 INTL 20050624)
[ 0.538011] ACPI: SSDT CFECB2A7, 0224 (r1 DELL PE_SC3 11 INTL 20050624)
[ 0.538017] ACPI: SSDT CFECB71D, 0162 (r1 DELL PE_SC3 10 INTL 20050624)
[ 0.540079] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.540081] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.540082] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.540083] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.540088] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.540093] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.540100] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[ 0.540104] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.540106] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.540108] ACPI: IRQ0 used by override.
[ 0.540110] ACPI: IRQ2 used by override.
[ 0.540111] ACPI: IRQ9 used by override.
[ 0.540115] Using ACPI (MADT) for SMP configuration information
[ 0.540120] Allocating PCI resources starting at d1000000 (gap: d0000000:10000000)
[ 0.540178] Built 1 zonelists. Total pages: 997761
[ 0.540180] Kernel command line: root=UUID=4482e189-9c21-43dc-9c82-2edc3805ce9f ro console=tty0
[ 0.540345] Enabling fast FPU save and restore... done.
[ 0.540348] Enabling unmasked SIMD FPU exception support... done.
[ 0.540350] Initializing CPU#0
[ 0.540455] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.540530] Xen reported: 2133.462 MHz processor.
[ 0.544434] Console: colour VGA+ 80x50
[ 0.555013] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.555296] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.611384] Software IO TLB enabled:
[ 0.611386] Aperture: 64 megabytes
[ 0.611387] Kernel range: c3b4f000 - c7b4f000
[ 0.611387] Address size: 27 bits
[ 0.615345] vmalloc area: ee000000-f53fe000, maxmem 2d800000
[ 0.733420] Memory: 3889712k/4022468k available (2071k kernel code, 123684k reserved, 925k data, 200k init,

3276996k highmem)
[ 0.733548] virtual kernel memory layout:
[ 0.733549] fixmap : 0xf568f000 - 0xf57ff000 (1472 kB)
[ 0.733550] pkmap : 0xf5400000 - 0xf5600000 (2048 kB)
[ 0.733551] vmalloc : 0xee000000 - 0xf53fe000 ( 115 MB)
[ 0.733552] lowmem : 0xc0000000 - 0xed800000 ( 728 MB)
[ 0.733553] .init : 0xc03f3000 - 0xc0425000 ( 200 kB)
[ 0.733553] .data : 0xc0305dfe - 0xc03ed544 ( 925 kB)
[ 0.733554] .text : 0xc0100000 - 0xc0305dfe (2071 kB)
[ 0.734276] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 0.734501] SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=4, Nodes=1
[ 0.800627] Calibrating delay using timer specific routine.. 4269.06 BogoMIPS (lpj=8538138)
[ 0.800822] Security Framework v1.0.0 initialized
[ 0.800917] SELinux: Disabled at boot.
[ 0.801015] Mount-cache hash table entries: 512
[ 0.801204] CPU: After generic identify, caps: bfebd3f1 20100000 00000000 00000000 0000e3bd 00000000 00000001
[ 0.801214] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.801371] CPU: L2 cache: 4096K
[ 0.801461] CPU: After all inits, caps: bfebd3f1 20100000 00000000 00003940 0000e3bd 00000000 00000001
[ 0.801468] Compat vDSO mapped to f57fe000.
[ 0.801561] Checking 'hlt' instruction... OK.
[ 0.801808] SMP alternatives: switching to UP code
[ 0.802110] Early unpacking initramfs... done
[ 0.820097] ACPI: Core revision 20070126
[ 0.820232] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[ 0.821457] ENABLING IO-APIC IRQs
[ 0.821692] SMP alternatives: switching to SMP code
[ 0.821854] Initializing CPU#1
[ 0.821912] Initializing CPU#2
[ 0.821946] Brought up 4 CPUs
[ 0.821950] Initializing CPU#3
[ 0.902570] migration_cost=17
[ 0.903408] NET: Registered protocol family 16
[ 0.903608] ACPI: bus type pci registered
[ 0.903706] PCI: Using configuration type 1
[ 0.903796] Setting up standard PCI resources
[ 0.905214] ACPI: EC: Look up EC in DSDT
[ 0.907316] ACPI: System BIOS is requesting _OSI(Linux)
[ 0.907409] ACPI: Please test with "acpi_osi=!Linux"
[ 0.907410] Please send dmidecode to <email address hidden>
[ 0.907719] ACPI: Interpreter enabled
[ 0.907812] ACPI: Using IOAPIC for interrupt routing
[ 0.912399] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.912500] PCI: Probing PCI hardware (bus 00)
[ 0.914597] PCI: Transparent bridge - 0000:00:1e.0
[ 0.914819] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.915096] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
[ 0.915188] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.SBE0._PRT]
[ 0.915291] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.SBE4._PRT]
[ 0.915344] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.SBE5._PRT]
[ 0.915395] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.COMP._PRT]
[ 0.916260] ACPI: PCI Interrupt Link [LK00] (IRQs 3 4 5 6 7 10 11 12 14 *15)
[ 0.917248] ACPI: PCI Interrupt Link [LK01] (IRQs 3 4 5 6 7 10 11 12 *14 15)
[ 0.918230] ACPI: PCI Interrupt Link [LK02] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.919392] ACPI: PCI Interrupt Link [LK03] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.920368] ACPI: PCI Interrupt Link [LK04] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.921333] ACPI: PCI Interrupt Link [LK05] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.922296] ACPI: PCI Interrupt Link [LK06] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.923436] ACPI: PCI Interrupt Link [LK07] (IRQs 3 4 5 *6 7 10 11 12 14 15)
[ 0.924422] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 0.924523] pnp: PnP ACPI init
[ 0.924617] ACPI: bus type pnp registered
[ 0.928944] pnp: PnP ACPI: found 14 devices
[ 0.929035] ACPI: ACPI bus type pnp unregistered
[ 0.929140] xen_mem: Initialising balloon driver.
[ 0.929333] PCI: Using ACPI for IRQ routing
[ 0.929423] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 0.929630] NET: Registered protocol family 8
[ 0.929720] NET: Registered protocol family 20
[ 0.929855] pnp: 00:0a: ioport range 0x800-0x87f has been reserved
[ 0.929949] pnp: 00:0a: ioport range 0x880-0x8bf has been reserved
[ 0.930045] pnp: 00:0a: ioport range 0x8c0-0x8df has been reserved
[ 0.930138] pnp: 00:0a: ioport range 0x8e0-0x8e3 has been reserved
[ 0.930231] pnp: 00:0a: ioport range 0x900-0x900 has been reserved
[ 0.930325] pnp: 00:0a: ioport range 0xc00-0xc0f has been reserved
[ 0.930419] pnp: 00:0a: ioport range 0xc10-0xc1f has been reserved
[ 0.930513] pnp: 00:0a: ioport range 0xca0-0xca7 has been reserved
[ 0.930609] pnp: 00:0b: ioport range 0xca8-0xca8 has been reserved
[ 0.930703] pnp: 00:0b: ioport range 0xcac-0xcac has been reserved
[ 0.930798] pnp: 00:0c: iomem range 0xe0000000-0xefffffff could not be reserved
[ 0.931291] PCI: Bridge: 0000:00:01.0
[ 0.931380] IO window: disabled.
[ 0.931472] MEM window: disabled.
[ 0.931564] PREFETCH window: disabled.
[ 0.931657] PCI: Bridge: 0000:00:1c.0
[ 0.931747] IO window: e000-efff
[ 0.931841] MEM window: dfb00000-dfcfffff
[ 0.931935] PREFETCH window: disabled.
[ 0.932004] Time: xen clocksource has been installed.
[ 0.932135] PCI: Bridge: 0000:00:1c.4
[ 0.932223] IO window: disabled.
[ 0.932317] MEM window: dfd00000-dfdfffff
[ 0.932410] PREFETCH window: disabled.
[ 0.932504] PCI: Bridge: 0000:00:1c.5
[ 0.932592] IO window: disabled.
[ 0.932686] MEM window: dfe00000-dfefffff
[ 0.932779] PREFETCH window: disabled.
[ 0.932876] PCI: Bridge: 0000:00:1e.0
[ 0.932966] IO window: d000-dfff
[ 0.933060] MEM window: dff00000-dfffffff
[ 0.933154] PREFETCH window: d0000000-d7ffffff
[ 0.933271] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 0.933452] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 0.933483] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 0.933664] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 0.933694] ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 16 (level, low) -> IRQ 16
[ 0.933875] PCI: Setting latency timer of device 0000:00:1c.4 to 64
[ 0.933909] ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 17 (level, low) -> IRQ 17
[ 0.934090] PCI: Setting latency timer of device 0000:00:1c.5 to 64
[ 0.934108] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 0.934117] NET: Registered protocol family 2
[ 0.972043] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.972184] TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
[ 0.972808] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.973073] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.973169] TCP reno registered
[ 0.984124] checking if image is initramfs... it is
[ 1.013299] Freeing initrd memory: 15998k freed
[ 1.014287] audit: initializing netlink socket (disabled)
[ 1.014394] audit(1206017930.012:1): initialized
[ 1.014585] highmem bounce pool size: 64 pages
[ 1.017390] VFS: Disk quotas dquot_6.5.1
[ 1.017553] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.017770] io scheduler noop registered
[ 1.017873] io scheduler anticipatory registered
[ 1.017971] io scheduler deadline registered
[ 1.018081] io scheduler cfq registered (default)
[ 1.032056] Boot video device is 0000:05:05.0
[ 1.032172] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 1.032277] assign_interrupt_mode Found MSI capability
[ 1.032369] Allocate Port Service[0000:00:01.0:pcie00]
[ 1.032552] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 1.032650] assign_interrupt_mode Found MSI capability
[ 1.032750] Allocate Port Service[0000:00:1c.0:pcie00]
[ 1.032806] Allocate Port Service[0000:00:1c.0:pcie02]
[ 1.032962] PCI: Setting latency timer of device 0000:00:1c.4 to 64
[ 1.033045] assign_interrupt_mode Found MSI capability
[ 1.033137] Allocate Port Service[0000:00:1c.4:pcie00]
[ 1.033304] PCI: Setting latency timer of device 0000:00:1c.5 to 64
[ 1.033399] assign_interrupt_mode Found MSI capability
[ 1.033499] Allocate Port Service[0000:00:1c.5:pcie00]
[ 1.062048] Real Time Clock Driver v1.12ac
[ 1.062308] hpet_acpi_add: no address or irqs in _CRS
[ 1.063096] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 1.063344] input: Macintosh mouse button emulation as /class/input/input0
[ 1.063511] Xen virtual console successfully installed as ttyS0
[ 1.063648] Event-channel device installed.
[ 1.069538] PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[ 1.072267] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.072363] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.072565] mice: PS/2 mouse device common for all mice
[ 1.072758] TCP cubic registered
[ 1.072857] NET: Registered protocol family 1
[ 1.072968] Using IPI No-Shortcut mode
[ 1.073222] Freeing unused kernel memory: 200k freed
[ 1.128631] input: AT Translated Set 2 keyboard as /class/input/input1
[ 1.315570] AppArmor: AppArmor initialized<5>audit(1206017930.308:2): type=1505 info="AppArmor initialized"

pid=1115
[ 1.324890] fuse init (API version 7.8)
[ 1.332982] Failure registering capabilities with primary security module.
[ 2.074656] usbcore: registered new interface driver usbfs
[ 2.074780] usbcore: registered new interface driver hub
[ 2.074896] usbcore: registered new device driver usb
[ 2.075969] USB Universal Host Controller Interface driver v3.0
[ 2.076143] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 21 (level, low) -> IRQ 18
[ 2.076339] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 2.076343] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 2.076515] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 2.076672] uhci_hcd 0000:00:1d.0: irq 18, io base 0x0000cc60
[ 2.076888] usb usb1: configuration #1 chosen from 1 choice
[ 2.077001] hub 1-0:1.0: USB hub found
[ 2.077107] hub 1-0:1.0: 2 ports detected
[ 2.098331] SCSI subsystem initialized
[ 2.131223] libata version 2.21 loaded.
[ 2.151803] Fusion MPT base driver 3.04.04
[ 2.151904] Copyright (c) 1999-2007 LSI Logic Corporation
[ 2.157291] Fusion MPT SAS Host driver 3.04.04
[ 2.180186] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 20 (level, low) -> IRQ 19
[ 2.180373] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 2.180377] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 2.180499] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[ 2.180650] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000cc80
[ 2.180846] usb usb2: configuration #1 chosen from 1 choice
[ 2.180955] hub 2-0:1.0: USB hub found
[ 2.181050] hub 2-0:1.0: 2 ports detected
[ 2.284136] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 21 (level, low) -> IRQ 18
[ 2.284331] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 2.284335] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 2.284453] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[ 2.284589] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000cca0
[ 2.284782] usb usb3: configuration #1 chosen from 1 choice
[ 2.284891] hub 3-0:1.0: USB hub found
[ 2.284985] hub 3-0:1.0: 2 ports detected
[ 2.389258] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 21 (level, low) -> IRQ 18
[ 2.389452] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 2.389456] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 2.389564] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4
[ 2.389720] ehci_hcd 0000:00:1d.7: debug port 1
[ 2.389815] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[ 2.389820] ehci_hcd 0000:00:1d.7: irq 18, io mem 0xdfaffc00
[ 2.394228] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 2.394396] usb usb4: configuration #1 chosen from 1 choice
[ 2.394504] hub 4-0:1.0: USB hub found
[ 2.394602] hub 4-0:1.0: 6 ports detected
[ 2.496119] tg3.c:v3.77 (May 31, 2007)
[ 2.496255] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 2.496443] PCI: Setting latency timer of device 0000:03:00.0 to 64
[ 2.516307] eth0: Tigon3 [partno(BCM95721) rev 4201 PHY(5750)] (PCI Express) 10/100/1000Base-T Ethernet

00:19:b9:fa:59:80
[ 2.516836] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] WireSpeed[1] TSOcap[1]
[ 2.516950] eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[ 2.517074] ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 2.517261] PCI: Setting latency timer of device 0000:04:00.0 to 64
[ 2.536274] eth1: Tigon3 [partno(BCM95721) rev 4201 PHY(5750)] (PCI Express) 10/100/1000Base-T Ethernet

00:19:b9:fa:59:81
[ 2.536799] eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] WireSpeed[1] TSOcap[1]
[ 2.536912] eth1: dma_rwctrl[76180000] dma_mask[64-bit]
[ 2.537080] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 2.537267] mptbase: Initiating ioc0 bringup
[ 2.908034] usb 4-3: new high speed USB device using ehci_hcd and address 2
[ 3.050029] usb 4-3: configuration #1 chosen from 1 choice
[ 3.240053] ioc0: SAS1068E: Capabilities={Initiator}
[ 3.240449] PCI: Setting latency timer of device 0000:02:00.0 to 64
[ 3.288036] usb 4-5: new high speed USB device using ehci_hcd and address 3
[ 3.420399] usb 4-5: configuration #1 chosen from 1 choice
[ 3.420601] hub 4-5:1.0: USB hub found
[ 3.420832] hub 4-5:1.0: 4 ports detected
[ 3.524608] usbcore: registered new interface driver libusual
[ 3.531254] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 3.531353] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 3.533093] Initializing USB Mass Storage driver...
[ 3.533270] scsi0 : SCSI emulation for USB Mass Storage devices
[ 3.533400] usb-storage: device found at 2
[ 3.533402] usb-storage: waiting for device to settle before scanning
[ 3.533411] usbcore: registered new interface driver usb-storage
[ 3.533503] USB Mass Storage support registered.
[ 5.160027] floppy0: no floppy controllers found
[ 8.532254] usb-storage: device scan complete
[ 8.532874] scsi 0:0:0:0: Direct-Access IC25N030 ATMR04-0 0811 PQ: 0 ANSI: 0
[ 8.560969] sd 0:0:0:0: [sda] 58605120 512-byte hardware sectors (30006 MB)
[ 8.562344] sd 0:0:0:0: [sda] Test WP failed, assume Write Enabled
[ 8.562436] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ 8.563467] sd 0:0:0:0: [sda] 58605120 512-byte hardware sectors (30006 MB)
[ 8.564840] sd 0:0:0:0: [sda] Test WP failed, assume Write Enabled
[ 8.564942] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ 8.565044] sda: sda1
[ 8.895306] sd 0:0:0:0: [sda] Attached SCSI disk
[ 8.899360] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 9.011755] scsi1 : ioc0: LSISAS1068E, FwRev=00142e00h, Ports=1, MaxQ=511, IRQ=16
[ 9.044690] scsi 1:0:0:0: Direct-Access ATA SAMSUNG HE160HJ 0-24 PQ: 0 ANSI: 5
[ 9.045444] scsi 1:0:0:0: Attached scsi generic sg1 type 0
[ 9.064933] scsi 1:0:1:0: Direct-Access ATA SAMSUNG HE160HJ 0-24 PQ: 0 ANSI: 5
[ 9.065659] scsi 1:0:1:0: Attached scsi generic sg2 type 0
[ 9.068220] scsi 1:1:0:0: Direct-Access Dell VIRTUAL DISK 1028 PQ: 0 ANSI: 5
[ 9.068775] sd 1:1:0:0: [sdb] 310546432 512-byte hardware sectors (159000 MB)
[ 9.069097] sd 1:1:0:0: [sdb] Write Protect is off
[ 9.069195] sd 1:1:0:0: [sdb] Mode Sense: 03 00 00 08
[ 9.069592] sd 1:1:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 9.070114] sd 1:1:0:0: [sdb] 310546432 512-byte hardware sectors (159000 MB)
[ 9.070433] sd 1:1:0:0: [sdb] Write Protect is off
[ 9.070532] sd 1:1:0:0: [sdb] Mode Sense: 03 00 00 08
[ 9.070928] sd 1:1:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 9.071051] sdb: sdb1 sdb2 < sdb5 >
[ 9.120499] sd 1:1:0:0: [sdb] Attached SCSI disk
[ 9.120612] sd 1:1:0:0: Attached scsi generic sg3 type 0
[ 9.120732] ata_piix 0000:00:1f.2: version 2.11
[ 9.120741] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 9.276085] ACPI: PCI Interrupt 0000:00:1f.2[C] -> GSI 23 (level, low) -> IRQ 20
[ 9.276309] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 9.276376] scsi2 : ata_piix
[ 9.276507] scsi3 : ata_piix
[ 9.276615] ata1: SATA max UDMA/133 cmd 0x0001cc30 ctl 0x0001cc2a bmdma 0x0001cc40 irq 20
[ 9.276726] ata2: SATA max UDMA/133 cmd 0x0001cc38 ctl 0x0001cc2e bmdma 0x0001cc48 irq 20
[ 9.343856] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 9.343956] EXT3-fs: write access will be enabled during recovery.
[ 9.632296] ata1.01: ATAPI: TSSTcorpCD-RW/DVD-ROM TSL462D, DE07, max UDMA/33
[ 9.632397] ata1.01: applying bridge limits
[ 9.836384] ata1.01: configured for UDMA/33
[ 10.036656] scsi 2:0:1:0: CD-ROM TSSTcorp CDRWDVD TSL462D DE07 PQ: 0 ANSI: 5
[ 10.037407] scsi 2:0:1:0: Attached scsi generic sg4 type 5
[ 10.173359] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[ 10.173458] Uniform CD-ROM driver Revision: 3.20
[ 10.173600] sr 2:0:1:0: Attached scsi CD-ROM sr0
[ 11.405003] kjournald starting. Commit interval 5 seconds
[ 11.405018] EXT3-fs: recovery complete.
[ 11.405400] EXT3-fs: mounted filesystem with ordered data mode.
[ 16.500273] NET: Registered protocol family 10
[ 16.500477] lo: Disabled Privacy Extensions
[ 16.500700] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 16.825022] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 16.843067] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 16.980108] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 16.995661] input: PC Speaker as /class/input/input2
[ 17.042096] 8250_pnp: Unknown symbol serial8250_unregister_port
[ 17.042237] 8250_pnp: Unknown symbol serial8250_resume_port
[ 17.042352] 8250_pnp: Unknown symbol serial8250_register_port
[ 17.042467] 8250_pnp: Unknown symbol serial8250_suspend_port
[ 17.100960] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 17.120444] 8250_pnp: Unknown symbol serial8250_unregister_port
[ 17.120583] 8250_pnp: Unknown symbol serial8250_resume_port
[ 17.120698] 8250_pnp: Unknown symbol serial8250_register_port
[ 17.120823] 8250_pnp: Unknown symbol serial8250_suspend_port
[ 17.477087] input: PS/2 Logitech Mouse as /class/input/input3
[ 18.053884] tg3: eth0: Link is up at 1000 Mbps, full duplex.
[ 18.053979] tg3: eth0: Flow control is on for TX and on for RX.
[ 18.055487] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 19.992049] floppy0: no floppy controllers found
[ 21.096737] loop: module loaded
[ 21.147809] lp: driver loaded but no devices found
[ 21.356819] Adding 6337600k swap on /dev/sdb5. Priority:-1 extents:1 across:6337600k
[ 21.537783] EXT3 FS on sdb1, internal journal
[ 25.361253] Bridge firewalling registered
[ 25.467836] Setting mem allocation to 4014276 kiB
[ 25.496162] Setting mem allocation to 4014276 kiB
[ 25.863164] NET: Registered protocol family 17
[ 25.885232] device vif0.0 entered promiscuous mode
[ 25.885248] audit(1206017954.880:3): dev=vif0.0 prom=256 old_prom=0 auid=4294967295
[ 25.888355] xenbr0: port 1(vif0.0) entering learning state
[ 25.892049] xenbr0: topology change detected, propagating
[ 25.892053] xenbr0: port 1(vif0.0) entering forwarding state
[ 25.949217] ADDRCONF(NETDEV_UP): peth0: link is not ready
[ 29.060788] tg3: peth0: Link is up at 1000 Mbps, full duplex.
[ 29.060794] tg3: peth0: Flow control is on for TX and on for RX.
[ 29.062230] ADDRCONF(NETDEV_CHANGE): peth0: link becomes ready
[ 30.001193] device peth0 entered promiscuous mode
[ 30.001209] audit(1206017959.000:4): dev=peth0 prom=256 old_prom=0 auid=4294967295
[ 30.001213] xenbr0: port 2(peth0) entering learning state
[ 30.004070] xenbr0: topology change detected, propagating
[ 30.004074] xenbr0: port 2(peth0) entering forwarding state
[ 34.888022] vif0.0: no IPv6 routers present
[ 38.060017] peth0: no IPv6 routers present
[ 40.704021] eth0: no IPv6 routers present