Kubuntu Edgy Eft shutdown problem

Kernel : 2.6.17-10-generic #2 SMP
Intel chipset fo the video
The problem does not appear each time I shut down the computer. And it is not alxays the same probleme. Sometimes the screen shtudown but not the computer, sometimes the neither the screen nor the computer shutdown, sometimes. The comon point is that i have to press the power button for 5 seconds to switch off the computer.
dmesg.log , dmidecode.log , lspci-vv.log , lspci-vvn.log files :

dmesg.log

[17179569.184000] Linux version 2.6.17-10-generic (root@vernadsky) (gcc version 4.1.2 20060928 (prerelease) (Ubuntu 4.1.1-13ubuntu5)) #2 SMP Fri Oct 13 18:45:35 UTC 2006 (Ubuntu 2.6.17-10.33-generic)
[17179569.184000] BIOS-provided physical RAM map:
[17179569.184000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[17179569.184000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[17179569.184000] BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved)
[17179569.184000] BIOS-e820: 0000000000100000 - 000000001f7c8300 (usable)
[17179569.184000] BIOS-e820: 000000001f7c8300 - 0000000020000000 (reserved)
[17179569.184000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
[17179569.184000] BIOS-e820: 00000000fec00000 - 00000000fed40000 (reserved)
[17179569.184000] BIOS-e820: 00000000fed45000 - 0000000100000000 (reserved)
[17179569.184000] 0MB HIGHMEM available.
[17179569.184000] 503MB LOWMEM available.
[17179569.184000] found SMP MP-table at 000fe700
[17179569.184000] On node 0 totalpages: 128968
[17179569.184000] DMA zone: 4096 pages, LIFO batch:0
[17179569.184000] Normal zone: 124872 pages, LIFO batch:31
[17179569.184000] DMI 2.4 present.
[17179569.184000] ACPI: RSDP (v000 COMPAQ ) @ 0x000e8610
[17179569.184000] ACPI: RSDT (v001 COMPAQ CPQ0968 0x20060424 0x00000000) @ 0x1f7d8340
[17179569.184000] ACPI: FADT (v001 COMPAQ LAKEPORT 0x00000001 0x00000000) @ 0x1f7d83e8
[17179569.184000] ACPI: MADT (v001 COMPAQ LAKEPORT 0x00000001 0x00000000) @ 0x1f7d845c
[17179569.184000] ACPI: ASF! (v032 COMPAQ LAKEPORT 0x00000001 0x00000000) @ 0x1f7d84e0
[17179569.184000] ACPI: MCFG (v001 COMPAQ LAKEPORT 0x00000001 0x00000000) @ 0x1f7d8543
[17179569.184000] ACPI: TCPA (v001 COMPAQ LAKEPORT 0x00000001 0x00000000) @ 0x1f7d857f
[17179569.184000] ACPI: DSDT (v001 COMPAQ DSDT_PRJ 0x00000001 MSFT 0x0100000e) @ 0x00000000
[17179569.184000] ACPI: PM-Timer IO Port: 0xf808
[17179569.184000] ACPI: Local APIC address 0xfee00000
[17179569.184000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[17179569.184000] Processor #0 15:4 APIC version 20
[17179569.184000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[17179569.184000] Processor #1 15:4 APIC version 20
[17179569.184000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] disabled)
[17179569.184000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] disabled)
[17179569.184000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[17179569.184000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[17179569.184000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[17179569.184000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[17179569.184000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[17179569.184000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[17179569.184000] ACPI: IRQ0 used by override.
[17179569.184000] ACPI: IRQ2 used by override.
[17179569.184000] ACPI: IRQ9 used by override.
[17179569.184000] Enabling APIC mode: Flat. Using 1 I/O APICs
[17179569.184000] Using ACPI (MADT) for SMP configuration information
[17179569.184000] Allocating PCI resources starting at 30000000 (gap: 20000000:d0000000)
[17179569.184000] Built 1 zonelists
[17179569.184000] Kernel command line: root=/dev/sda6 ro quiet splash locale=fr_FR
[17179569.184000] mapped APIC to ffffd000 (fee00000)
[17179569.184000] mapped IOAPIC to ffffc000 (fec00000)
[17179569.184000] Enabling fast FPU save and restore... done.
[17179569.184000] Enabling unmasked SIMD FPU exception support... done.
[17179569.184000] Initializing CPU#0
[17179569.184000] PID hash table entries: 2048 (order: 11, 8192 bytes)
[17179569.184000] Detected 2992.943 MHz processor.
[17179569.184000] Using pmtmr for high-res timesource
[17179569.184000] Console: colour VGA+ 80x25
[17179570.656000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[17179570.656000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[17179570.664000] Memory: 501480k/515872k available (1910k kernel code, 13764k reserved, 1070k data, 308k init, 0k highmem)
[17179570.664000] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[17179570.744000] Calibrating delay using timer specific routine.. 5993.05 BogoMIPS (lpj=11986119)
[17179570.744000] Security Framework v1.0.0 initialized
[17179570.744000] SELinux: Disabled at boot.
[17179570.744000] Mount-cache hash table entries: 512
[17179570.744000] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000649d 00000000 00000000
[17179570.744000] CPU: After vendor identify, caps: bfebfbff 20100000 00000000 00000000 0000649d 00000000 00000000
[17179570.744000] monitor/mwait feature present.
[17179570.744000] using mwait in idle threads.
[17179570.744000] CPU: Trace cache: 12K uops, L1 D cache: 16K
[17179570.744000] CPU: L2 cache: 2048K
[17179570.744000] CPU: Hyper-Threading is disabled
[17179570.744000] CPU: After all inits, caps: bfebfbff 20100000 00000000 00000180 0000649d 00000000 00000000
[17179570.744000] Checking 'hlt' instruction... OK.
[17179570.760000] SMP alternatives: switching to UP code
[17179570.760000] checking if image is initramfs... it is
[17179571.196000] Freeing initrd memory: 5523k freed
[17179571.196000] ACPI: Core revision 20060707
[17179571.196000] ACPI: Looking for DSDT ... not found!
[17179571.200000] CPU0: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 03
[17179571.200000] SMP alternatives: switching to SMP code
[17179571.200000] Booting processor 1/1 eip 3000
[17179571.212000] Initializing CPU#1
[17179571.292000] Calibrating delay using timer specific routine.. 5985.55 BogoMIPS (lpj=11971103)
[17179571.292000] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000649d 00000000 00000000
[17179571.292000] CPU: After vendor identify, caps: bfebfbff 20100000 00000000 00000000 0000649d 00000000 00000000
[17179571.292000] monitor/mwait feature present.
[17179571.292000] CPU: Trace cache: 12K uops, L1 D cache: 16K
[17179571.292000] CPU: L2 cache: 2048K
[17179571.292000] CPU: Hyper-Threading is disabled
[17179571.292000] CPU: After all inits, caps: bfebfbff 20100000 00000000 00000180 0000649d 00000000 00000000
[17179571.292000] CPU1: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 03
[17179571.292000] Total of 2 processors activated (11978.61 BogoMIPS).
[17179571.292000] ENABLING IO-APIC IRQs
[17179571.292000] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[17179571.436000] checking TSC synchronization across 2 CPUs: passed.
[17179571.440000] Brought up 2 CPUs
[17179571.504000] migration_cost=4000
[17179571.504000] HP Compaq Laptop series board detected. Selecting BIOS-method for reboots.
[17179571.504000] NET: Registered protocol family 16
[17179571.504000] EISA bus registered
[17179571.504000] ACPI: bus type pci registered
[17179571.504000] PCI: Using MMCONFIG
[17179571.504000] Setting up standard PCI resources
[17179571.508000] ACPI: Interpreter enabled
[17179571.508000] ACPI: Using IOAPIC for interrupt routing
[17179571.508000] ACPI: PCI Root Bridge [PCI0] (0000:00)
[17179571.508000] PCI: Probing PCI hardware (bus 00)
[17179571.508000] ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
[17179571.512000] Boot video device is 0000:00:02.0
[17179571.512000] PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
[17179571.512000] PCI: Transparent bridge - 0000:00:1e.0
[17179571.512000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[17179571.524000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCX1._PRT]
[17179571.528000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCX2._PRT]
[17179571.528000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB_._PRT]
[17179571.532000] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 14 15)
[17179571.532000] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 14 15)
[17179571.532000] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 14 15)
[17179571.532000] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 14 15)
[17179571.532000] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 11 14 15)
[17179571.532000] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 *11 14 15)
[17179571.532000] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 14 15)
[17179571.532000] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
[17179571.532000] Linux Plug and Play Support v0.97 (c) Adam Belay
[17179571.532000] pnp: PnP ACPI init
[17179571.536000] pnp: PnP ACPI: found 14 devices
[17179571.536000] PnPBIOS: Disabled by ACPI PNP
[17179571.536000] PCI: Using ACPI for IRQ routing
[17179571.536000] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[17179571.536000] pnp: 00:0b: ioport range 0x4d0-0x4d1 has been reserved
[17179571.536000] pnp: 00:0c: ioport range 0x400-0x48f could not be reserved
[17179571.536000] pnp: 00:0c: ioport range 0xf800-0xf87f could not be reserved
[17179571.536000] pnp: 00:0c: ioport range 0xfa00-0xfa3f has been reserved
[17179571.536000] pnp: 00:0c: ioport range 0xfc00-0xfc7f has been reserved
[17179571.536000] pnp: 00:0c: ioport range 0xfc80-0xfcff has been reserved
[17179571.536000] pnp: 00:0c: ioport range 0xfe00-0xfe7f has been reserved
[17179571.536000] pnp: 00:0c: ioport range 0xfe80-0xfeff has been reserved
[17179571.536000] pnp: 00:0c: ioport range 0xcb0-0xcbf has been reserved
[17179571.536000] PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0
[17179571.536000] PCI: Bridge: 0000:00:1c.0
[17179571.536000] IO window: disabled.
[17179571.536000] MEM window: disabled.
[17179571.536000] PREFETCH window: disabled.
[17179571.536000] PCI: Bridge: 0000:00:1c.1
[17179571.536000] IO window: disabled.
[17179571.536000] MEM window: e0500000-e07fffff
[17179571.536000] PREFETCH window: disabled.
[17179571.536000] PCI: Bridge: 0000:00:1e.0
[17179571.536000] IO window: disabled.
[17179571.536000] MEM window: disabled.
[17179571.536000] PREFETCH window: disabled.
[17179571.536000] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[17179571.536000] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 169
[17179571.536000] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[17179571.536000] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[17179571.536000] NET: Registered protocol family 2
[17179571.576000] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[17179571.576000] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[17179571.576000] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[17179571.576000] TCP: Hash tables configured (established 16384 bind 8192)
[17179571.576000] TCP reno registered
[17179571.576000] audit: initializing netlink socket (disabled)
[17179571.576000] audit(1165339461.576:1): initialized
[17179571.576000] VFS: Disk quotas dquot_6.5.1
[17179571.576000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[17179571.576000] Initializing Cryptographic API
[17179571.576000] io scheduler noop registered
[17179571.576000] io scheduler anticipatory registered
[17179571.576000] io scheduler deadline registered
[17179571.576000] io scheduler cfq registered (default)
[17179571.576000] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[17179571.576000] pcie_portdrv_probe->Dev[27d0:8086] has invalid IRQ. Check vendor BIOS
[17179571.576000] assign_interrupt_mode Found MSI capability
[17179571.576000] Allocate Port Service[0000:00:1c.0:pcie00]
[17179571.576000] Allocate Port Service[0000:00:1c.0:pcie02]
[17179571.576000] Allocate Port Service[0000:00:1c.0:pcie03]
[17179571.576000] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 169
[17179571.576000] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[17179571.576000] assign_interrupt_mode Found MSI capability
[17179571.576000] Allocate Port Service[0000:00:1c.1:pcie00]
[17179571.576000] Allocate Port Service[0000:00:1c.1:pcie02]
[17179571.576000] Allocate Port Service[0000:00:1c.1:pcie03]
[17179571.576000] isapnp: Scanning for PnP cards...
[17179571.928000] isapnp: No Plug & Play device found
[17179571.952000] Real Time Clock Driver v1.12ac
[17179571.952000] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[17179571.952000] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[17179571.956000] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[17179571.956000] mice: PS/2 mouse device common for all mice
[17179571.956000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[17179571.956000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[17179571.956000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[17179571.956000] PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12
[17179571.956000] serio: i8042 AUX port at 0x60,0x64 irq 12
[17179571.956000] serio: i8042 KBD port at 0x60,0x64 irq 1
[17179571.960000] EISA: Probing bus 0 at eisa.0
[17179571.960000] Cannot allocate resource for EISA slot 1
[17179571.960000] EISA: Detected 0 cards.
[17179571.960000] TCP bic registered
[17179571.960000] NET: Registered protocol family 1
[17179571.960000] NET: Registered protocol family 8
[17179571.960000] NET: Registered protocol family 20
[17179571.960000] Starting balanced_irq
[17179571.960000] Using IPI No-Shortcut mode
[17179571.960000] ACPI: (supports S0 S1 S3 S4 S5)
[17179571.960000] Freeing unused kernel memory: 308k freed
[17179571.988000] input: AT Translated Set 2 keyboard as /class/input/input0
[17179573.024000] Capability LSM initialized
[17179573.056000] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [COMPAQ] OemTableId [ CPU_TM2] [20060707]
[17179573.056000] ACPI: Processor [CPU0] (supports 8 throttling states)
[17179573.056000] ACPI: Processor [CPU1] (supports 8 throttling states)
[17179573.392000] ICH7: IDE controller at PCI slot 0000:00:1f.1
[17179573.392000] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 17 (level, low) -> IRQ 169
[17179573.392000] ICH7: chipset revision 1
[17179573.392000] ICH7: not 100% native mode: will probe irqs later
[17179573.392000] ide0: BM-DMA at 0x10a0-0x10a7, BIOS settings: hda:DMA, hdb:pio
[17179573.392000] ide1: BM-DMA at 0x10a8-0x10af, BIOS settings: hdc:pio, hdd:pio
[17179573.392000] Probing IDE interface ide0...
[17179574.128000] hda: HL-DT-STDVD-ROM GDR8163B, ATAPI CD/DVD-ROM drive
[17179574.468000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[17179574.472000] Probing IDE interface ide1...
[17179575.052000] hda: ATAPI 48X DVD-ROM drive, 256kB Cache, UDMA(44)
[17179575.052000] Uniform CD-ROM driver Revision: 3.20
[17179575.112000] SCSI subsystem initialized
[17179575.112000] libata version 1.20 loaded.
[17179575.116000] ata_piix 0000:00:1f.2: version 1.05
[17179575.116000] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 201
[17179575.116000] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[17179575.116000] ata1: SATA max UDMA/133 cmd 0x10D8 ctl 0x10F2 bmdma 0x10B0 irq 201
[17179575.116000] ata2: SATA max UDMA/133 cmd 0x10E0 ctl 0x10F6 bmdma 0x10B8 irq 201
[17179575.280000] ata1: dev 0 cfg 49:2f00 82:7069 83:7c01 84:4023 85:7069 86:3c01 87:4023 88:203f
[17179575.280000] ata1: dev 0 ATA-7, max UDMA/100, 156301488 sectors: LBA48
[17179575.288000] ata1: dev 0 configured for UDMA/100
[17179575.288000] scsi0 : ata_piix
[17179575.452000] ata2: dev 0 cfg 49:2f00 82:7c6b 83:7f09 84:4673 85:7c69 86:3e01 87:4663 88:207f
[17179575.452000] ata2: dev 0 ATA-7, max UDMA/133, 320173056 sectors: LBA48
[17179575.464000] ata2: dev 0 configured for UDMA/133
[17179575.464000] scsi1 : ata_piix
[17179575.464000] Vendor: ATA Model: SAMSUNG HD080HJ Rev: WT10
[17179575.464000] Type: Direct-Access ANSI SCSI revision: 05
[17179575.464000] Vendor: ATA Model: Maxtor 6L160M0 Rev: BANC
[17179575.464000] Type: Direct-Access ANSI SCSI revision: 05
[17179575.472000] SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
[17179575.472000] sda: Write Protect is off
[17179575.472000] sda: Mode Sense: 00 3a 00 00
[17179575.472000] SCSI device sda: drive cache: write back
[17179575.472000] SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
[17179575.472000] sda: Write Protect is off
[17179575.472000] sda: Mode Sense: 00 3a 00 00
[17179575.472000] SCSI device sda: drive cache: write back
[17179575.472000] sda: sda1 sda2 < sda5 sda6 sda7 >
[17179575.520000] sd 0:0:0:0: Attached scsi disk sda
[17179575.520000] SCSI device sdb: 320173056 512-byte hdwr sectors (163929 MB)
[17179575.520000] sdb: Write Protect is off
[17179575.520000] sdb: Mode Sense: 00 3a 00 00
[17179575.520000] SCSI device sdb: drive cache: write back
[17179575.520000] SCSI device sdb: 320173056 512-byte hdwr sectors (163929 MB)
[17179575.520000] sdb: Write Protect is off
[17179575.520000] sdb: Mode Sense: 00 3a 00 00
[17179575.520000] SCSI device sdb: drive cache: write back
[17179575.520000] sdb: sdb1 < sdb5 > sdb2
[17179575.548000] sd 1:0:0:0: Attached scsi disk sdb
[17179575.928000] Probing IDE interface ide1...
[17179575.964000] usbcore: registered new driver usbfs
[17179575.964000] usbcore: registered new driver hub
[17179575.964000] USB Universal Host Controller Interface driver v3.0
[17179575.964000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 209
[17179575.964000] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[17179575.964000] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[17179575.964000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[17179575.964000] uhci_hcd 0000:00:1d.0: irq 209, io base 0x00001000
[17179575.964000] usb usb1: configuration #1 chosen from 1 choice
[17179575.964000] hub 1-0:1.0: USB hub found
[17179575.964000] hub 1-0:1.0: 2 ports detected
[17179576.068000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 18 (level, low) -> IRQ 217
[17179576.068000] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[17179576.068000] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[17179576.068000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[17179576.068000] uhci_hcd 0000:00:1d.1: irq 217, io base 0x00001020
[17179576.068000] usb usb2: configuration #1 chosen from 1 choice
[17179576.068000] hub 2-0:1.0: USB hub found
[17179576.068000] hub 2-0:1.0: 2 ports detected
[17179576.172000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 21 (level, low) -> IRQ 225
[17179576.172000] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[17179576.172000] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[17179576.172000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[17179576.172000] uhci_hcd 0000:00:1d.2: irq 225, io base 0x00001040
[17179576.172000] usb usb3: configuration #1 chosen from 1 choice
[17179576.172000] hub 3-0:1.0: USB hub found
[17179576.172000] hub 3-0:1.0: 2 ports detected
[17179576.276000] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 22 (level, low) -> IRQ 233
[17179576.276000] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[17179576.276000] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[17179576.276000] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[17179576.276000] uhci_hcd 0000:00:1d.3: irq 233, io base 0x00001060
[17179576.276000] usb usb4: configuration #1 chosen from 1 choice
[17179576.276000] hub 4-0:1.0: USB hub found
[17179576.276000] hub 4-0:1.0: 2 ports detected
[17179576.380000] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 209
[17179576.380000] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[17179576.380000] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[17179576.380000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[17179576.380000] ehci_hcd 0000:00:1d.7: debug port 1
[17179576.380000] PCI: cache line size of 128 is not supported by device 0000:00:1d.7
[17179576.380000] ehci_hcd 0000:00:1d.7: irq 209, io mem 0xe04c4000
[17179576.384000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[17179576.384000] usb usb5: configuration #1 chosen from 1 choice
[17179576.384000] hub 5-0:1.0: USB hub found
[17179576.384000] hub 5-0:1.0: 8 ports detected
[17179576.548000] Attempting manual resume
[17179576.560000] EXT3-fs: INFO: recovery required on readonly filesystem.
[17179576.560000] EXT3-fs: write access will be enabled during recovery.
[17179577.204000] kjournald starting. Commit interval 5 seconds
[17179577.204000] EXT3-fs: sda6: orphan cleanup on readonly fs
[17179577.204000] ext3_orphan_cleanup: deleting unreferenced inode 685451
[17179577.204000] EXT3-fs: sda6: 1 orphan inode deleted
[17179577.204000] EXT3-fs: recovery complete.
[17179577.216000] EXT3-fs: mounted filesystem with ordered data mode.
[17179583.724000] hw_random hardware driver 1.0.0 loaded
[17179583.812000] Linux agpgart interface v0.101 (c) Dave Jones
[17179583.816000] agpgart: Detected an Intel 945G Chipset.
[17179583.816000] agpgart: Detected 7932K stolen memory.
[17179583.832000] agpgart: AGP aperture is 256M @ 0xd0000000
[17179583.948000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[17179583.960000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[17179584.008000] input: PC Speaker as /class/input/input1
[17179584.200000] FDC 0 is a post-1991 82077
[17179584.228000] parport: PnPBIOS parport detected.
[17179584.228000] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[17179584.436000] tg3.c:v3.59.1 (August 25, 2006)
[17179584.436000] ACPI: PCI Interrupt 0000:3f:00.0[A] -> GSI 17 (level, low) -> IRQ 169
[17179584.436000] PCI: Setting latency timer of device 0000:3f:00.0 to 64
[17179584.448000] eth0: Tigon3 [partno(BCM95752) rev 6001 PHY(5752)] (PCI Express) 10/100/1000BaseT Ethernet 00:14:c2:0b:60:c9
[17179584.448000] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[1]
[17179584.448000] eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[17179584.652000] sd 0:0:0:0: Attached scsi generic sg0 type 0
[17179584.652000] sd 1:0:0:0: Attached scsi generic sg1 type 0
[17179584.696000] PM: Writing back config space on device 0000:3f:00.0 at offset 1 (was 100406, writing 100006)
[17179584.772000] input: ImPS/2 Logitech Wheel Mouse as /class/input/input2
[17179584.808000] ts: Compaq touchscreen protocol output
[17179584.904000] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 21 (level, low) -> IRQ 225
[17179584.904000] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[17179585.436000] lp0: using parport0 (interrupt-driven).
[17179585.460000] Adding 2096440k swap on /dev/disk/by-uuid/9720f6dc-c3ad-4c0b-a6b2-fcf756d53534. Priority:-1 extents:1 across:2096440k
[17179585.580000] EXT3 FS on sda6, internal journal
[17179585.940000] NET: Registered protocol family 17
[17179586.352000] tg3: eth0: Link is up at 100 Mbps, full duplex.
[17179586.352000] tg3: eth0: Flow control is off for TX and off for RX.
[17179587.564000] kjournald starting. Commit interval 5 seconds
[17179587.576000] EXT3 FS on sdb5, internal journal
[17179587.576000] EXT3-fs: mounted filesystem with ordered data mode.
[17179587.712000] NTFS driver 2.1.27 [Flags: R/O MODULE].
[17179587.760000] NTFS volume version 3.1.
[17179592.440000] CSLIP: code copyright 1989 Regents of the University of California
[17179592.448000] PPP generic driver version 2.4.2
[17179592.476000] NET: Registered protocol family 10
[17179592.476000] lo: Disabled Privacy Extensions
[17179592.480000] IPv6 over IPv4 tunneling driver
[17179593.112000] ACPI: Power Button (FF) [PWRF]
[17179593.112000] ACPI: Power Button (CM) [PBTN]
[17179593.232000] ibm_acpi: ec object not found
[17179593.268000] pcc_acpi: loading...
[17179593.308000] wmi_add device=df388400
[17179593.308000] calling WQBA
[17179593.556000] acpi-cpufreq: CPU0 - ACPI performance management activated.
[17179593.556000] acpi-cpufreq: CPU1 - ACPI performance management activated.
[17179594.684000] [drm] Initialized drm 1.0.1 20051102
[17179594.688000] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 58
[17179594.688000] [drm] Initialized i915 1.5.0 20060119 on minor 0
[17179594.904000] apm: BIOS not found.
[17179598.452000] Bluetooth: Core ver 2.8
[17179598.452000] NET: Registered protocol family 31
[17179598.452000] Bluetooth: HCI device and connection manager initialized
[17179598.452000] Bluetooth: HCI socket layer initialized
[17179598.488000] Bluetooth: L2CAP ver 2.8
[17179598.488000] Bluetooth: L2CAP socket layer initialized
[17179598.584000] Bluetooth: RFCOMM socket layer initialized
[17179598.584000] Bluetooth: RFCOMM TTY layer initialized
[17179598.584000] Bluetooth: RFCOMM ver 1.7
[17179603.204000] eth0: no IPv6 routers present
[17179657.708000] NET: Registered protocol family 24
[17179659.976000] ip_tables: (C) 2000-2006 Netfilter Core Team

dmidecode.log

# dmidecode 2.8
SMBIOS 2.4 present.
67 structures occupying 2017 bytes.
Table at 0x000EE600.

Handle 0x0001, DMI type 0, 24 bytes
BIOS Information
 Vendor: Hewlett-Packard
 Version: 786D1 v01.56
 Release Date: 04/24/2006
 Address: 0xE0000
 Runtime Size: 128 kB
 ROM Size: 1024 kB
 Characteristics:
  PCI is supported
  PNP is supported
  BIOS is upgradeable
  BIOS shadowing is allowed
  Boot from CD is supported
  Selectable boot is supported
  EDD is supported
  Japanese floppy for Toshiba 1.2 MB is supported (int 13h)
  5.25"/360 KB floppy services are supported (int 13h)
  5.25"/1.2 MB floppy services are supported (int 13h)
  3.5"/720 KB floppy services are supported (int 13h)
  Print screen service is supported (int 5h)
  8042 keyboard services are supported (int 9h)
  Serial services are supported (int 14h)
  Printer services are supported (int 17h)
  ACPI is supported
  USB legacy is supported
  LS-120 boot is supported
  ATAPI Zip drive boot is supported
  BIOS boot specification is supported
  Function key-initiated network boot is supported
  Targeted content distribution is supported
 BIOS Revision: 1.56

Handle 0x0002, DMI type 1, 27 bytes
System Information
 Manufacturer: Hewlett-Packard
 Product Name: HP Compaq dc7600 Small Form Factor
 Version:
 Serial Number: CZC538386T
 UUID: C288588F-2D2F-DA11-BBDA-C20B60C90014
 Wake-up Type: Power Switch
 SKU Number: EC837ET#ABF
 Family: 103C_53307F

Handle 0x0003, DMI type 2, 8 bytes
Base Board Information
 Manufacturer: Hewlett-Packard
 Product Name: 09F8h
 Version: Not Specified
 Serial Number: CZC538386T

Handle 0x0004, DMI type 3, 17 bytes
Chassis Information
 Manufacturer: Hewlett-Packard
 Type: Low Profile Desktop
 Lock: Not Present
 Version: Not Specified
 Serial Number: CZC538386T
 Asset Tag: CZC538386T
 Boot-up State: Safe
 Power Supply State: Safe
 Thermal State: Safe
 Security Status: Unknown
 OEM Information: 0x00000000

Handle 0x0005, DMI type 4, 35 bytes
Processor Information
 Socket Designation: XU1 PROCESSOR
 Type: Central Processor
 Family: Pentium 4
 Manufacturer: Intel
 ID: 43 0F 00 00 FF FB EB BF
 Signature: Type 0, Family 15, Model 4, Stepping 3
 Flags:
  FPU (Floating-point unit on-chip)
  VME (Virtual mode extension)
  DE (Debugging extension)
  PSE (Page size extension)
  TSC (Time stamp counter)
  MSR (Model specific registers)
  PAE (Physical address extension)
  MCE (Machine check exception)
  CX8 (CMPXCHG8 instruction supported)
  APIC (On-chip APIC hardware supported)
  SEP (Fast system call)
  MTRR (Memory type range registers)
  PGE (Page global enable)
  MCA (Machine check architecture)
  CMOV (Conditional move instruction supported)
  PAT (Page attribute table)
  PSE-36 (36-bit page size extension)
  CLFSH (CLFLUSH instruction supported)
  DS (Debug store)
  ACPI (ACPI supported)
  MMX (MMX technology supported)
  FXSR (Fast floating-point save and restore)
  SSE (Streaming SIMD extensions)
  SSE2 (Streaming SIMD extensions 2)
  SS (Self-snoop)
  HTT (Hyper-threading technology)
  TM (Thermal monitor supported)
  PBE (Pending break enabled)
 Version: Intel(R) Pentium(R) 4 CPU 3.00GHz
 Voltage: 1.2 V
 External Clock: 800 MHz
 Max Speed: 6000 MHz
 Current Speed: 3000 MHz
 Status: Populated, Enabled
 Upgrade: Other
 L1 Cache Handle: 0x0007
 L2 Cache Handle: 0x0008
 L3 Cache Handle: Not Provided
 Serial Number: Not Specified
 Asset Tag: Not Specified
 Part Number: Not Specified

Handle 0x0006, DMI type 4, 35 bytes
Processor Information
 Socket Designation: XU1 PROCESSOR 2
 Type: Central Processor
 Family: Unknown
 Manufacturer: Intel
 ID: 00 00 00 00 00 00 00 00
 Version:
 Voltage: 1.2 V
 External Clock: Unknown
 Max Speed: 6000 MHz
 Current Speed: Unknown
 Status: Unpopulated
 Upgrade: Slot 1
 L1 Cache Handle: 0x0009
 L2 Cache Handle: 0x000A
 L3 Cache Handle: Not Provided
 Serial Number: Not Specified
 Asset Tag: Not Specified
 Part Number: Not Specified

Handle 0x0007, DMI type 7, 19 bytes
Cache Information
 Socket Designation: Internal L1 Cache
 Configuration: Enabled, Not Socketed, Level 1
 Operational Mode: Write Through
 Location: Internal
 Installed Size: 28 KB
 Maximum Size: 28 KB
 Supported SRAM Types:
  Burst
 Installed SRAM Type: Burst
 Speed: Unknown
 Error Correction Type: Parity
 System Type: Data
 Associativity: 8-way Set-associative

Handle 0x0008, DMI type 7, 19 bytes
Cache Information
 Socket Designation: Cache L2
 Configuration: Enabled, Not Socketed, Level 2
 Operational Mode: Write Back
 Location: Internal
 Installed Size: 2048 KB
 Maximum Size: 4096 KB
 Supported SRAM Types:
  Burst
 Installed SRAM Type: Burst
 Speed: Unknown
 Error Correction Type: Single-bit ECC
 System Type: Data
 Associativity: 8-way Set-associative

Handle 0x0009, DMI type 7, 19 bytes
Cache Information
 Socket Designation: Internal L1 Cache
 Configuration: Disabled, Not Socketed, Level 1
 Operational Mode: Unknown
 Location: Internal
 Installed Size: 0 KB
 Maximum Size: 0 KB
 Supported SRAM Types:
  Burst
 Installed SRAM Type: Burst
 Speed: Unknown
 Error Correction Type: Unknown
 System Type: Unknown
 Associativity: 4-way Set-associative

Handle 0x000A, DMI type 7, 19 bytes
Cache Information
 Socket Designation: Cache L2
 Configuration: Disabled, Not Socketed, Level 2
 Operational Mode: Unknown
 Location: Internal
 Installed Size: 0 KB
 Maximum Size: 4096 KB
 Supported SRAM Types:
  Burst
 Installed SRAM Type: Burst
 Speed: Unknown
 Error Correction Type: Single-bit ECC
 System Type: Unknown
 Associativity: 4-way Set-associative

Handle 0x000B, DMI type 8, 9 bytes
Port Connector Information
 Internal Reference Designator: SATA0
 Internal Connector Type: Other
 External Reference Designator: Not Specified
 External Connector Type: None
 Port Type: Other

Handle 0x000C, DMI type 8, 9 bytes
Port Connector Information
 Internal Reference Designator: SATA1
 Internal Connector Type: Other
 External Reference Designator: Not Specified
 External Connector Type: None
 Port Type: Other

Handle 0x000F, DMI type 8, 9 bytes
Port Connector Information
 Internal Reference Designator: SERIAL A
 Internal Connector Type: None
 External Reference Designator: COM A
 External Connector Type: DB-9 male
 Port Type: Serial Port 16550A Compatible

Handle 0x0010, DMI type 8, 9 bytes
Port Connector Information
 Internal Reference Designator: SERIAL B
 Internal Connector Type: Other
 External Reference Designator: Not Specified
 External Connector Type: DB-9 male
 Port Type: Serial Port 16550A Compatible

Handle 0x0011, DMI type 8, 9 bytes
Port Connector Information
 Internal Reference Designator: Not Specified
 Internal Connector Type: None
 External Reference Designator: PARALLEL
 External Connector Type: DB-25 female
 Port Type: Parallel Port ECP/EPP

Handle 0x0012, DMI type 8, 9 bytes
Port Connector Information
 Internal Reference Designator: Not Specified
 Internal Connector Type: None
 External Reference Designator: USB 1
 External Connector Type: Access Bus (USB)
 Port Type: USB

Handle 0x0013, DMI type 8, 9 bytes
Port Connector Information
 Internal Reference Designator: Not Specified
 Internal Connector Type: None
 External Reference Designator: USB 2
 External Connector Type: Access Bus (USB)
 Port Type: USB

Handle 0x0014, DMI type 8, 9 bytes
Port Connector Information
 Internal Reference Designator: Not Specified
 Internal Connector Type: None
 External Reference Designator: USB 3
 External Connector Type: Access Bus (USB)
 Port Type: USB

Handle 0x0015, DMI type 8, 9 bytes
Port Connector Information
 Internal Reference Designator: Not Specified
 Internal Connector Type: None
 External Reference Designator: USB 4
 External Connector Type: Access Bus (USB)
 Port Type: USB

Handle 0x0016, DMI type 8, 9 bytes
Port Connector Information
 Internal Reference Designator: Not Specified
 Internal Connector Type: None
 External Reference Designator: USB 5
 External Connector Type: Access Bus (USB)
 Port Type: USB

Handle 0x0017, DMI type 8, 9 bytes
Port Connector Information
 Internal Reference Designator: Not Specified
 Internal Connector Type: None
 External Reference Designator: USB 6
 External Connector Type: Access Bus (USB)
 Port Type: USB

Handle 0x0018, DMI type 8, 9 bytes
Port Connector Information
 Internal Reference Designator: FRNT_USB
 Internal Connector Type: Other
 External Reference Designator: USB 7
 External Connector Type: Access Bus (USB)
 Port Type: USB

Handle 0x0019, DMI type 8, 9 bytes
Port Connector Information
 Internal Reference Designator: FRNT_USB
 Internal Connector Type: Other
 External Reference Designator: USB 8
 External Connector Type: Access Bus (USB)
 Port Type: USB

Handle 0x001A, DMI type 8, 9 bytes
Port Connector Information
 Internal Reference Designator: Not Specified
 Internal Connector Type: None
 External Reference Designator: KEYBOARD
 External Connector Type: PS/2
 Port Type: Keyboard Port

Handle 0x001B, DMI type 8, 9 bytes
Port Connector Information
 Internal Reference Designator: Not Specified
 Internal Connector Type: None
 External Reference Designator: MOUSE
 External Connector Type: PS/2
 Port Type: Mouse Port

Handle 0x001D, DMI type 8, 9 bytes
Port Connector Information
 Internal Reference Designator: Not Specified
 Internal Connector Type: None
 External Reference Designator: REAR LINE IN
 External Connector Type: Mini DIN
 Port Type: Audio Port

Handle 0x001E, DMI type 8, 9 bytes
Port Connector Information
 Internal Reference Designator: Not Specified
 Internal Connector Type: None
 External Reference Designator: VIDEO
 External Connector Type: DB-15 female
 Port Type: Video Port

Handle 0x001F, DMI type 8, 9 bytes
Port Connector Information
 Internal Reference Designator: Not Specified
 Internal Connector Type: None
 External Reference Designator: REAR HEADPHONE/LINEOUT
 External Connector Type: Mini DIN
 Port Type: Audio Port

Handle 0x0020, DMI type 8, 9 bytes
Port Connector Information
 Internal Reference Designator: Not Specified
 Internal Connector Type: None
 External Reference Designator: RJ45
 External Connector Type: RJ-45
 Port Type: Network Port

Handle 0x0021, DMI type 8, 9 bytes
Port Connector Information
 Internal Reference Designator: CPU FAN
 Internal Connector Type: Other
 External Reference Designator: Not Specified
 External Connector Type: None
 Port Type: Other

Handle 0x0022, DMI type 8, 9 bytes
Port Connector Information
 Internal Reference Designator: CD AUDIO (CD)
 Internal Connector Type: On Board Sound Input From CD-ROM
 External Reference Designator: Not Specified
 External Connector Type: None
 Port Type: Audio Port

Handle 0x0023, DMI type 8, 9 bytes
Port Connector Information
 Internal Reference Designator: AUX AUDIO (AUX)
 Internal Connector Type: On Board Sound Input From CD-ROM
 External Reference Designator: Not Specified
 External Connector Type: None
 Port Type: Audio Port

Handle 0x0024, DMI type 8, 9 bytes
Port Connector Information
 Internal Reference Designator: PRIMARY IDE
 Internal Connector Type: On Board IDE
 External Reference Designator: Not Specified
 External Connector Type: None
 Port Type: None

Handle 0x0025, DMI type 8, 9 bytes
Port Connector Information
 Internal Reference Designator: FLOPPY
 Internal Connector Type: On Board Floppy
 External Reference Designator: Not Specified
 External Connector Type: None
 Port Type: None

Handle 0x0026, DMI type 8, 9 bytes
Port Connector Information
 Internal Reference Designator: FRNT AUD
 Internal Connector Type: Other
 External Reference Designator: FRONT HEADPHONE/LINEOUT & MIC
 External Connector Type: Mini DIN
 Port Type: Audio Port

Handle 0x0027, DMI type 8, 9 bytes
Port Connector Information
 Internal Reference Designator: CHASSIS FAN
 Internal Connector Type: Other
 External Reference Designator: Not Specified
 External Connector Type: None
 Port Type: Other

Handle 0x0028, DMI type 8, 9 bytes
Port Connector Information
 Internal Reference Designator: SPEAKER (SPKR)
 Internal Connector Type: Other
 External Reference Designator: Not Specified
 External Connector Type: None
 Port Type: Other

Handle 0x002A, DMI type 8, 9 bytes
Port Connector Information
 Internal Reference Designator: PASSWORD CLEAR (PSWD)
 Internal Connector Type: Other
 External Reference Designator: Not Specified
 External Connector Type: None
 Port Type: Other

Handle 0x002B, DMI type 8, 9 bytes
Port Connector Information
 Internal Reference Designator: HOOD SENSE (HSENSE)
 Internal Connector Type: Other
 External Reference Designator: Not Specified
 External Connector Type: None
 Port Type: Other

Handle 0x002C, DMI type 8, 9 bytes
Port Connector Information
 Internal Reference Designator: HOOD LOCK (HLCK)
 Internal Connector Type: Other
 External Reference Designator: Not Specified
 External Connector Type: None
 Port Type: Other

Handle 0x002D, DMI type 8, 9 bytes
Port Connector Information
 Internal Reference Designator: TPM SECURITY (SEC)
 Internal Connector Type: Other
 External Reference Designator: Not Specified
 External Connector Type: None
 Port Type: Other

Handle 0x002F, DMI type 9, 13 bytes
System Slot Information
 Designation: PCI1
 Type: 32-bit PCI
 Current Usage: Available
 Length: Long
 ID: 1
 Characteristics:
  5.0 V is provided
  3.3 V is provided
  PME signal is supported
  SMBus signal is supported

Handle 0x0030, DMI type 9, 13 bytes
System Slot Information
 Designation: PCI2
 Type: 32-bit PCI
 Current Usage: Available
 Length: Long
 ID: 2
 Characteristics:
  5.0 V is provided
  3.3 V is provided
  PME signal is supported
  SMBus signal is supported

Handle 0x0033, DMI type 9, 13 bytes
System Slot Information
 Designation: PCI EXPRESS x1 SLOT/PCIEx1
 Type: x1 PCI Express
 Current Usage: Available
 Length: Long
 Characteristics:
  3.3 V is provided
  PME signal is supported
  SMBus signal is supported

Handle 0x0034, DMI type 9, 13 bytes
System Slot Information
 Designation: PCI EXPRESS x16 SLOT/PCIEx16
 Type: x16 PCI Express
 Current Usage: Available
 Length: Long
 Characteristics:
  3.3 V is provided
  PME signal is supported
  SMBus signal is supported

Handle 0x0035, DMI type 13, 22 bytes
BIOS Language Information
 Installable Languages: 1
  en|US|iso8859-1
 Currently Installed Language: en|US|iso8859-1

Handle 0x0036, DMI type 16, 15 bytes
Physical Memory Array
 Location: System Board Or Motherboard
 Use: System Memory
 Error Correction Type: None
 Maximum Capacity: 4 GB
 Error Information Handle: Not Provided
 Number Of Devices: 4

Handle 0x0037, DMI type 16, 15 bytes
Physical Memory Array
 Location: System Board Or Motherboard
 Use: Flash Memory
 Error Correction Type: None
 Maximum Capacity: 1 MB
 Error Information Handle: Not Provided
 Number Of Devices: 1

Handle 0x0038, DMI type 17, 27 bytes
Memory Device
 Array Handle: 0x0036
 Error Information Handle: Not Provided
 Total Width: 64 bits
 Data Width: 64 bits
 Size: 256 MB
 Form Factor: DIMM
 Set: None
 Locator: XMM1
 Bank Locator: Not Specified
 Type: DDR2
 Type Detail: Synchronous
 Speed: 533 MHz (1.9 ns)
 Manufacturer: JEDEC ID:7F 7F 7F 0B 00 00 00 00
 Serial Number: 312893DF
 Asset Tag: Not Specified
 Part Number: NT256T64UH4A0FY-37

Handle 0x0039, DMI type 17, 27 bytes
Memory Device
 Array Handle: 0x0036
 Error Information Handle: Not Provided
 Total Width: Unknown
 Data Width: Unknown
 Size: No Module Installed
 Form Factor: DIMM
 Set: None
 Locator: XMM2
 Bank Locator: Not Specified
 Type: DDR2
 Type Detail: Synchronous
 Speed: Unknown
 Manufacturer: JEDEC ID:
 Serial Number:
 Asset Tag: Not Specified
 Part Number:

Handle 0x003A, DMI type 17, 27 bytes
Memory Device
 Array Handle: 0x0036
 Error Information Handle: Not Provided
 Total Width: 64 bits
 Data Width: 64 bits
 Size: 256 MB
 Form Factor: DIMM
 Set: None
 Locator: XMM3
 Bank Locator: Not Specified
 Type: DDR2
 Type Detail: Synchronous
 Speed: 533 MHz (1.9 ns)
 Manufacturer: JEDEC ID:7F 7F 7F 0B 00 00 00 00
 Serial Number: 32289446
 Asset Tag: Not Specified
 Part Number: NT256T64UH4A0FY-37

Handle 0x003B, DMI type 17, 27 bytes
Memory Device
 Array Handle: 0x0036
 Error Information Handle: Not Provided
 Total Width: Unknown
 Data Width: Unknown
 Size: No Module Installed
 Form Factor: DIMM
 Set: None
 Locator: XMM4
 Bank Locator: Not Specified
 Type: DDR2
 Type Detail: Synchronous
 Speed: Unknown
 Manufacturer: JEDEC ID:
 Serial Number:
 Asset Tag: Not Specified
 Part Number:

Handle 0x003D, DMI type 17, 27 bytes
Memory Device
 Array Handle: 0x0037
 Error Information Handle: Not Provided
 Total Width: 2 bits
 Data Width: 2 bits
 Size: 1024 kB
 Form Factor: Chip
 Set: None
 Locator: SYSTEM ROM
 Bank Locator: Not Specified
 Type: Flash
 Type Detail: Non-Volatile
 Speed: Unknown
 Manufacturer: Not Specified
 Serial Number: Not Specified
 Asset Tag: Not Specified
 Part Number: Not Specified

Handle 0x003E, DMI type 19, 15 bytes
Memory Array Mapped Address
 Starting Address: 0x00000000000
 Ending Address: 0x0001FFFFFFF
 Range Size: 512 MB
 Physical Array Handle: 0x0036
 Partition Width: 0

Handle 0x003F, DMI type 19, 15 bytes
Memory Array Mapped Address
 Starting Address: 0x000FFF80000
 Ending Address: 0x000FFFFFFFF
 Range Size: 512 kB
 Physical Array Handle: 0x0037
 Partition Width: 0

Handle 0x0040, DMI type 20, 19 bytes
Memory Device Mapped Address
 Starting Address: 0x00000000000
 Ending Address: 0x0000FFFFFFF
 Range Size: 256 MB
 Physical Device Handle: 0x0038
 Memory Array Mapped Address Handle: 0x003E
 Partition Row Position: 1

Handle 0x0041, DMI type 20, 19 bytes
Memory Device Mapped Address
 Starting Address: 0x00000000000
 Ending Address: 0x000000003FF
 Range Size: 1 kB
 Physical Device Handle: 0x0039
 Memory Array Mapped Address Handle: 0x003E
 Partition Row Position: 2

Handle 0x0042, DMI type 20, 19 bytes
Memory Device Mapped Address
 Starting Address: 0x00010000000
 Ending Address: 0x0001FFFFFFF
 Range Size: 256 MB
 Physical Device Handle: 0x003A
 Memory Array Mapped Address Handle: 0x003E
 Partition Row Position: 3

Handle 0x0043, DMI type 20, 19 bytes
Memory Device Mapped Address
 Starting Address: 0x00000000000
 Ending Address: 0x000000003FF
 Range Size: 1 kB
 Physical Device Handle: 0x003B
 Memory Array Mapped Address Handle: 0x003E
 Partition Row Position: 4

Handle 0x0044, DMI type 20, 19 bytes
Memory Device Mapped Address
 Starting Address: 0x000FFF80000
 Ending Address: 0x000FFFFFFFF
 Range Size: 512 kB
 Physical Device Handle: 0x003D
 Memory Array Mapped Address Handle: 0x003F
 Partition Row Position: 1

Handle 0x0045, DMI type 32, 11 bytes
System Boot Information
 Status: No errors detected

Handle 0x0046, DMI type 136, 6 bytes
OEM-specific Type
 Header and Data:
  88 06 46 00 5A 5A

Handle 0x0047, DMI type 197, 10 bytes
OEM-specific Type
 Header and Data:
  C5 0A 47 00 05 00 00 01 FF 01

Handle 0x0048, DMI type 197, 10 bytes
OEM-specific Type
 Header and Data:
  C5 0A 48 00 06 00 FF 00 FF 01

Handle 0x0049, DMI type 207, 9 bytes
OEM-specific Type
 Header and Data:
  CF 09 49 00 00 00 00 24 00

Handle 0x004A, DMI type 208, 5 bytes
OEM-specific Type
 Header and Data:
  D0 05 4A 00 01

Handle 0x004B, DMI type 127, 4 bytes
End Of Table

lspci-vv.log

00:00.0 Host bridge: Intel Corporation 945G/GZ/P/PL Express Memory Controller Hub (rev 02)
 Subsystem: Hewlett-Packard Company Unknown device 3011
 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
 Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
 Latency: 0
 Capabilities: <access denied>

00:02.0 VGA compatible controller: Intel Corporation 945G/GZ Express Integrated Graphics Controller (rev 02) (prog-if 00 [VGA])
 Subsystem: Hewlett-Packard Company Unknown device 3011
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
 Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
 Latency: 0
 Interrupt: pin A routed to IRQ 58
 Region 0: Memory at e0400000 (32-bit, non-prefetchable) [size=512K]
 Region 1: I/O ports at 10c0 [size=8]
 Region 2: Memory at d0000000 (32-bit, prefetchable) [size=256M]
 Region 3: Memory at e0480000 (32-bit, non-prefetchable) [size=256K]
 Capabilities: <access denied>

00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 01)
 Subsystem: Hewlett-Packard Company Unknown device 3011
 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
 Latency: 0, Cache Line Size: 64 bytes
 Interrupt: pin A routed to IRQ 225
 Region 0: Memory at e04c0000 (64-bit, non-prefetchable) [size=16K]
 Capabilities: <access denied>

00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 01) (prog-if 00 [Normal decode])
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
 Latency: 0, Cache Line Size: 64 bytes
 Bus: primary=00, secondary=20, subordinate=20, sec-latency=0
 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
 BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
 Capabilities: <access denied>

00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (rev 01) (prog-if 00 [Normal decode])
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
 Latency: 0, Cache Line Size: 64 bytes
 Bus: primary=00, secondary=3f, subordinate=3f, sec-latency=0
 Memory behind bridge: e0500000-e07fffff
 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
 BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
 Capabilities: <access denied>

00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #1 (rev 01) (prog-if 00 [UHCI])
 Subsystem: Hewlett-Packard Company Unknown device 3011
 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
 Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
 Latency: 0
 Interrupt: pin A routed to IRQ 209
 Region 4: I/O ports at 1000 [size=32]

00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #2 (rev 01) (prog-if 00 [UHCI])
 Subsystem: Hewlett-Packard Company Unknown device 3011
 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
 Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
 Latency: 0
 Interrupt: pin B routed to IRQ 217
 Region 4: I/O ports at 1020 [size=32]

00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #3 (rev 01) (prog-if 00 [UHCI])
 Subsystem: Hewlett-Packard Company Unknown device 3011
 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
 Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
 Latency: 0
 Interrupt: pin C routed to IRQ 225
 Region 4: I/O ports at 1040 [size=32]

00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #4 (rev 01) (prog-if 00 [UHCI])
 Subsystem: Hewlett-Packard Company Unknown device 3011
 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
 Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
 Latency: 0
 Interrupt: pin D routed to IRQ 233
 Region 4: I/O ports at 1060 [size=32]

00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 01) (prog-if 20 [EHCI])
 Subsystem: Hewlett-Packard Company Unknown device 3011
 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
 Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
 Latency: 0
 Interrupt: pin A routed to IRQ 209
 Region 0: Memory at e04c4000 (32-bit, non-prefetchable) [size=1K]
 Capabilities: <access denied>

00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1) (prog-if 01 [Subtractive decode])
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
 Latency: 0
 Bus: primary=00, secondary=05, subordin