RESTART OR RE-PLUG IS REQUIRED
------------------------------
If you are installing a USB connected printer, and the printer was plugged in when you started this installer, you will need to either restart your PC or unplug and re-plug in your printer (USB cable only). If you choose to
restart, run this command after restarting: hp-setup (Note: If you are using a parallel connection, you will have to restart your PC. If you are using network/wireless, you can ignore and continue).
Restart or re-plug in your printer (r=restart, p=re-plug in*, i=ignore/continue, q=quit) :
If the user wish to configure the printer he may press enter <enter> and proceed for printer setup or else he can <quit> by pressing 'q'.
If the user wishes to configure the print queue and proceed to use interactive mode he will see a warning message if the queue is already present.
PRINTER SETUP
-------------
Please make sure your printer is connected and powered on at this time.
Do you want to setup printer in GUI mode? (u=GUI mode*, i=Interactive mode) : i
Running 'sudo hp-setup -i' command....
HP Linux Imaging and Printing System (ver. 3.15.6)
Printer/Fax Setup Utility ver. 9.0
Copyright (c) 2001-15 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
(Note: Defaults for each question are maked with a '*'. Press <enter> to accept the default.)
--------------------------------
| SELECT CONNECTION (I/O) TYPE |
--------------------------------
Num Connection Description
Type
-------- ---------- ----------------------------------------------------------
0* usb Universal Serial Bus (USB)
1 net Network/Ethernet/Wireless (direct connection or JetDirect)
Enter number 0...1 for connection type (q=quit, enter=usb*) ? 0
Using connection type: usb
Setting up device: hp:/usb/HP_Officejet_Pro_8610?serial=CN38O16GH3
Hi Daniel,
At the end of the installation you see
RESTART OR RE-PLUG IS REQUIRED ------- ------- ------- --
-------
If you are installing a USB connected printer, and the printer was plugged in when you started this installer, you will need to either restart your PC or unplug and re-plug in your printer (USB cable only). If you choose to
restart, run this command after restarting: hp-setup (Note: If you are using a parallel connection, you will have to restart your PC. If you are using network/wireless, you can ignore and continue).
Restart or re-plug in your printer (r=restart, p=re-plug in*, i=ignore/continue, q=quit) :
If the user wish to configure the printer he may press enter <enter> and proceed for printer setup or else he can <quit> by pressing 'q'.
If the user wishes to configure the print queue and proceed to use interactive mode he will see a warning message if the queue is already present.
PRINTER SETUP
-------------
Please make sure your printer is connected and powered on at this time.
Do you want to setup printer in GUI mode? (u=GUI mode*, i=Interactive mode) : i
Running 'sudo hp-setup -i' command....
HP Linux Imaging and Printing System (ver. 3.15.6)
Printer/Fax Setup Utility ver. 9.0
Copyright (c) 2001-15 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
(Note: Defaults for each question are maked with a '*'. Press <enter> to accept the default.)
------- ------- ------- ------- ---- ------- ------- ------- ----
| SELECT CONNECTION (I/O) TYPE |
-------
Num Connection Description ------- ------- ------- ------- ------- ------- ------- -- Ethernet/ Wireless (direct connection or JetDirect)
Type
-------- ---------- -------
0* usb Universal Serial Bus (USB)
1 net Network/
Enter number 0...1 for connection type (q=quit, enter=usb*) ? 0
Using connection type: usb
Setting up device: hp:/usb/ HP_Officejet_ Pro_8610? serial= CN38O16GH3
------- ------- ------- ------- -------
| PRINT QUEUE SETUP |
-------
warning: One or more print queues already exist for this device: HP_Officejet_ Pro_8610.
Would you like to install another print queue for this device (y=yes, n=no*, q=quit) ?
Where as the same is not prompted in GUI mode. We need to work on it. Thanks for reporting this issue.
Regards,
Goutam