[ 14.340313] hub 5-0:1.0: unable to enumerate USB device on port 2
[ 14.413131] usb 1-1.1: new full speed USB device using ehci_hcd and address 6
[ 14.500874] usb 1-1.1: New USB device found, idVendor=1fd2, idProduct=0064
[ 14.501179] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 14.501696] usb 1-1.1: Product: LGD-MultiTouch
[ 14.501977] usb 1-1.1: Manufacturer: LG Display
[ 14.506445] input: LG Display LGD-MultiTouch as /devices/pci0000:00/0000:00:13.5/usb1/1-1/1-1.1/1-1.1:1.0/input/input2
[ 14.508329] generic-usb 0003:1FD2:0064.0001: input,hiddev0,hidraw0: USB HID v1.00 Mouse [LG Display LGD-MultiTouch] on usb-0000:00:13.5-1.1/input0
from evtest
# evtest /dev/input/event2
Input driver version is 1.0.1
Input device ID: bus 0x3 vendor 0x1fd2 product 0x64 version 0x100
Input device name: "LG Display LGD-MultiTouch"
Supported events:
Event type 0 (Sync)
Event type 1 (Key)
Event code 272 (LeftBtn)
Event code 273 (RightBtn)
Event code 320 (ToolPen)
Event code 321 (ToolRubber)
Event code 330 (Touch)
Event type 3 (Absolute)
Event code 0 (X)
Value 0
Min 0
Max 1920
Event code 1 (Y)
Value 0
Min 0
Max 1080
Event code 2 (Z)
Value 0
Min 0
Max 1920
Event code 3 (Rx)
Value 0
Min 0
Max 1080
Event code 4 (Ry)
Value 0
Min 0
Max 32767
Event code 5 (Rz)
Value 0
Min 0
Max 32767
Event code 40 (Misc)
Value 0
Min 0
Max 1
Event code 41 (?)
Value 0
Min 0
Max 1
Event code 42 (?)
Value 0
Min 0
Max 1080
Event type 4 (Misc)
Event code 4 (ScanCode)
Testing ... (interrupt to exit)
<nothing follows>
Description of problem:
Dell ST2220T does not work. The device is seen, but no events are registered
Version-Release number of selected component (if applicable): 5-24.fc15. x86_64 x86_64 GNU/Linux
kernel 2.6.38.
How reproducible:
always
Steps to Reproduce:
1. Plugin the device
Actual results:
evtest returns no result
Expected results:
touch should be registered
Additional info:
The device is seen as a mouse ???
# cat /tmp/o
⎡ Virtual core pointer id=2 [master pointer (3)]
⎜ ↳ Virtual core XTEST pointer id=4 [slave pointer (2)]
⎜ ↳ LG Display LGD-MultiTouch id=10 [slave pointer (2)]
⎣ Virtual core keyboard id=3 [master keyboard (2)]
↳ Virtual core XTEST keyboard id=5 [slave keyboard (3)]
↳ Dell Dell USB Keyboard Hub id=6 [slave keyboard (3)]
↳ Dell Dell USB Keyboard Hub id=7 [slave keyboard (3)]
↳ Power Button id=8 [slave keyboard (3)]
↳ Power Button id=9 [slave keyboard (3)]
from dmesg
[ 14.340313] hub 5-0:1.0: unable to enumerate USB device on port 2 pci0000: 00/0000: 00:13.5/ usb1/1- 1/1-1.1/ 1-1.1:1. 0/input/ input2 0064.0001: input,hiddev0, hidraw0: USB HID v1.00 Mouse [LG Display LGD-MultiTouch] on usb-0000: 00:13.5- 1.1/input0
[ 14.413131] usb 1-1.1: new full speed USB device using ehci_hcd and address 6
[ 14.500874] usb 1-1.1: New USB device found, idVendor=1fd2, idProduct=0064
[ 14.501179] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 14.501696] usb 1-1.1: Product: LGD-MultiTouch
[ 14.501977] usb 1-1.1: Manufacturer: LG Display
[ 14.506445] input: LG Display LGD-MultiTouch as /devices/
[ 14.508329] generic-usb 0003:1FD2:
from evtest
# evtest /dev/input/event2
Input driver version is 1.0.1
Input device ID: bus 0x3 vendor 0x1fd2 product 0x64 version 0x100
Input device name: "LG Display LGD-MultiTouch"
Supported events:
Event type 0 (Sync)
Event type 1 (Key)
Event code 272 (LeftBtn)
Event code 273 (RightBtn)
Event code 320 (ToolPen)
Event code 321 (ToolRubber)
Event code 330 (Touch)
Event type 3 (Absolute)
Event code 0 (X)
Value 0
Min 0
Max 1920
Event code 1 (Y)
Value 0
Min 0
Max 1080
Event code 2 (Z)
Value 0
Min 0
Max 1920
Event code 3 (Rx)
Value 0
Min 0
Max 1080
Event code 4 (Ry)
Value 0
Min 0
Max 32767
Event code 5 (Rz)
Value 0
Min 0
Max 32767
Event code 40 (Misc)
Value 0
Min 0
Max 1
Event code 41 (?)
Value 0
Min 0
Max 1
Event code 42 (?)
Value 0
Min 0
Max 1080
Event type 4 (Misc)
Event code 4 (ScanCode)
Testing ... (interrupt to exit)
<nothing follows>