Comment 11 for bug 723276

I can confirm the but in the ubuntu 11.04 package build.

Everything seems to be fine, modules loaded and stuff. But I can't find the hdspmixer.
Normally it's included in the alsa-tools and alsa-tools-gui packages. And actually the mixer GUI does get an entry in the menu. But there is no command for it to execute. It is supposed to run hdspmixer - but it's not there.
If I write "hdsp" and try to autocomplete with tab in the terminal, I can now only se hdsploader and hdspconf (both seem to run just fine btw.).

From lspci
02:09.0 Multimedia audio controller: Xilinx Corporation RME Hammerfall DSP (rev 9a)

From lshw:
 description: Multimedia audio controller
       product: RME Hammerfall DSP
       vendor: Xilinx Corporation
       physical id: 9
       bus info: pci@0000:02:09.0
       version: 9a
       width: 32 bits
       clock: 33MHz
       capabilities: bus_master
       configuration: driver=RME Hammerfall DSP latency=255
       resources: irq:19 memory:fdff0000-fdffffff

uname -a:
Linux lars-desktop 2.6.38-8-generic #42-Ubuntu SMP Mon Apr 11 03:31:50 UTC 2011 i686 athlon i386 GNU/Linux

Version of alsa-tools:
 *** 1.0.24.1-0ubuntu1 0

Version of alsa-firmware-loaders:
*** 1.0.24.1-0ubuntu1 0

cat /proc/asound/version
Advanced Linux Sound Architecture Driver Version 1.0.23.

cat /proc/asound/cards
 0 [DSP ]: H-DSP - Hammerfall DSP
                      RME Hammerfall HDSP 9632 at 0xfdff0000, irq 19

cat /proc/asound/modules
 0 snd_hdsp

cat /proc/asound/DSP/hdsp
RME Hammerfall HDSP 9632 (Card #1)
Buffers: capture f2400000 playback f2600000
IRQ: 19 Registers bus: 0xfdff0000 VM: 0xf819c000
Control register: 0x300409a
Control2 register: 0x0
Status register: 0x32000000
Status2 register: 0xffff8701
FIFO status: 0
MIDI1 Output status: 0xffffff00
MIDI1 Input status: 0xffffff00
MIDI2 Output status: 0xffffff00
MIDI2 Input status: 0xffffff00
Use Midi Tasklet: on

Buffer Size (Latency): 2048 samples (2 periods of 8192 bytes)
Hardware pointer (frames): 0
Precise pointer: off
Line out: on
Firmware version: 1

Sample Clock Source: Internal 44.1 kHz
Preferred Sync Reference: ADAT1
AutoSync Reference: None
AutoSync Frequency: 0
System Clock Mode: Master
System Clock Frequency: 44100
System Clock Locked: No

IEC958 input: Coaxial
IEC958 output: Coaxial only
IEC958 quality: Consumer
IEC958 emphasis: off
IEC958 NonAudio: off
IEC958 sample rate: Error flag set

ADAT1: No Lock
SPDIF: No Lock
Word Clock: No Lock
ADAT Sync: No Lock

AD Gain : +4 dBu
DA Gain : -10 dBV
Phones Gain : -12 dB
XLR Breakout Cable : no
AEB : off (ADAT1 external)

modinfo soundcore
filename: /lib/modules/2.6.38-8-generic/kernel/sound/soundcore.ko
license: GPL
author: Alan Cox
description: Core sound module
srcversion: 982D4ED4F640D0B9C43B130
depends:
vermagic: 2.6.38-8-generic SMP mod_unload modversions 686

lsmod | grep snd
snd_hdsp 53247 0
snd_pcm 80244 1 snd_hdsp
snd_page_alloc 14073 2 snd_hdsp,snd_pcm
snd_hwdep 13274 1 snd_hdsp
snd_seq_midi 13132 0
snd_rawmidi 25269 2 snd_hdsp,snd_seq_midi
snd_seq_midi_event 14475 1 snd_seq_midi
snd_seq 51291 2 snd_seq_midi,snd_seq_midi_event
snd_timer 28659 2 snd_pcm,snd_seq
snd_seq_device 14110 3 snd_seq_midi,snd_rawmidi,snd_seq
snd 55295 7 snd_hdsp,snd_pcm,snd_hwdep,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
soundcore 12600 1 snd