Comment 97 for bug 35174

Hope the following is sufficient (there is a short hang and a long hang). If not I have the complete dmesg.

Alex

File Edit Options Buffers Tools Help
[17179570.640000] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[17179570.640000] ACPI: Processor [CPU1] (supports 8 throttling states)
[17179570.644000] ACPI: Thermal Zone [THM0] (61 C)
[17179570.644000] ACPI: Thermal Zone [THM1] (61 C)
[17179570.956000] ICH7: IDE controller at PCI slot 0000:00:1f.1
[17179570.956000] ACPI: PCI Interrupt 0000:00:1f.1[C] -> GSI 16 (level, low) -> IRQ 169
[17179570.956000] ICH7: chipset revision 2
[17179570.956000] ICH7: not 100% native mode: will probe irqs later
[17179570.956000] ide0: BM-DMA at 0x1880-0x1887, BIOS settings: hda:DMA, hdb:pio
[17179570.956000] Probing IDE interface ide0...

SHORT HANG HERE

[17179576.424000] hda: HL-DT-ST DVDRAM GSA-4083N, ATAPI CD/DVD-ROM drive
[17179578.888000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[17179578.896000] hda: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33)
[17179578.896000] Uniform CD-ROM driver Revision: 3.20
[17179579.184000] SCSI subsystem initialized
[17179579.188000] ACPI: bus type scsi registered
[17179579.188000] libata version 1.20 loaded.
[17179579.188000] ahci 0000:00:1f.2: version 1.2
[17179579.188000] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 16 (level, low) -> IRQ 169

LONG HANG HERE

[17179666.844000] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[17179666.844000] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0x1 impl SATA mode
[17179666.844000] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part
[17179666.844000] ata1: SATA max UDMA/133 cmd 0xF884C500 ctl 0x0 bmdma 0x0 irq 66
[17179666.844000] ata2: SATA max UDMA/133 cmd 0xF884C580 ctl 0x0 bmdma 0x0 irq 66
[17179666.844000] ata3: SATA max UDMA/133 cmd 0xF884C600 ctl 0x0 bmdma 0x0 irq 66
[17179666.844000] ata4: SATA max UDMA/133 cmd 0xF884C680 ctl 0x0 bmdma 0x0 irq 66