openssh 1:8.7p1-1 source package in Ubuntu

Changelog

openssh (1:8.7p1-1) unstable; urgency=medium

  * debian/upstream/signing-key.asc: Update from upstream.
  * New upstream release (https://www.openssh.com/releasenotes.html#8.7p1):
    - scp(1): this release changes the behaviour of remote to remote copies
      (e.g. "scp host-a:/path host-b:") to transfer through the local host
      by default (closes: #734386, LP: #1462758). This was previously
      available via the -3 flag. A -R flag has been added to select the old
      behaviour.
    - ssh(1)/sshd(8): both the client and server are now using a stricter
      configuration file parser.
    - ssh(1): when using SSHFP DNS records for host key verification, ssh(1)
      will verify all matching records instead of just those with the
      specific signature type requested.
    - ssh-keygen(1): when generating a FIDO key and specifying an explicit
      attestation challenge (using -Ochallenge), the challenge will now be
      hashed by the builtin security key middleware.
    - sshd(8): environment="..." directives in authorized_keys files are now
      first-match-wins and limited to 1024 discrete environment variable
      names.
    - scp(1): experimental support for transfers using the SFTP protocol as
      a replacement for the venerable SCP/RCP protocol that it has
      traditionally used. SFTP offers more predictable filename handling and
      does not require expansion of glob(3) patterns via the shell on the
      remote side.
      SFTP support may be enabled via a temporary scp -s flag. It is
      intended for SFTP to become the default transfer mode in the near
      future, at which time the -s flag will be removed. The -O flag exists
      to force use of the original SCP/RCP protocol for cases where SFTP may
      be unavailable or incompatible.
    - sftp-server(8): add a protocol extension to support expansion of ~/
      and ~user/ prefixed paths. This was added to support these paths when
      used by scp(1) while in SFTP mode.
    - ssh(1): add a ForkAfterAuthentication ssh_config(5) counterpart to the
      ssh(1) -f flag. GHPR231
    - ssh(1): add a StdinNull directive to ssh_config(5) that allows the
      config file to do the same thing as -n does on the ssh(1) command-
      line. GHPR231
    - ssh(1): add a SessionType directive to ssh_config, allowing the
      configuration file to offer equivalent control to the -N (no session)
      and -s (subsystem) command-line flags (closes: #609122).
    - ssh-keygen(1): allowed signers files used by ssh-keygen(1) signatures
      now support listing key validity intervals alongside they key, and
      ssh-keygen(1) can optionally check during signature verification
      whether a specified time falls inside this interval. This feature is
      intended for use by git to support signing and verifying objects using
      ssh keys.
    - ssh-keygen(8): support printing of the full public key in a sshsig
      signature via a -Oprint-pubkey flag.
    - ssh(1)/sshd(8): start time-based re-keying exactly on schedule in the
      client and server mainloops. Previously the re-key timeout could
      expire but re-keying would not start until a packet was sent or
      received, causing a spin in select() if the connection was quiescent.
    - ssh-keygen(1): avoid Y2038 problem in printing certificate validity
      lifetimes. Dates past 2^31-1 seconds since epoch were displayed
      incorrectly on some platforms.
    - scp(1): allow spaces to appear in usernames for local to remote and
      scp -3 remote to remote copies.
    - ssh(1)/sshd(8): remove references to ChallengeResponseAuthentication
      in favour of KbdInteractiveAuthentication. The former is what was in
      SSHv1, the latter is what is in SSHv2 (RFC4256) and they were treated
      as somewhat but not entirely equivalent. We retain the old name as a
      deprecated alias so configuration files continue to work as well as a
      reference in the man page for people looking for it.
    - ssh(1)/ssh-add(1)/ssh-keygen(1): fix decoding of X.509 subject name
      when extracting a key from a PKCS#11 certificate.
    - ssh(1): restore blocking status on stdio fds before close. ssh(1)
      needs file descriptors in non-blocking mode to operate but it was not
      restoring the original state on exit. This could cause problems with
      fds shared with other programs via the shell.
    - ssh(1)/sshd(8): switch both client and server mainloops from select(3)
      to pselect(3). Avoids race conditions where a signal may arrive
      immediately before select(3) and not be processed until an event
      fires.
    - ssh(1): sessions started with ControlPersist were incorrectly
      executing a shell when the -N (no shell) option was specified (closes:
      #762633).
    - ssh(1): check if IPQoS or TunnelDevice are already set before
      overriding. Prevents values in config files from overriding values
      supplied on the command line.
    - ssh(1): fix debug message when finding a private key to match a
      certificate being attempted for user authentication. Previously it
      would print the certificate's path, whereas it was supposed to be
      showing the private key's path.
    - sshd(8): match host certificates against host public keys, not private
      keys. Allows use of certificates with private keys held in a
      ssh-agent.
    - ssh(1): add a workaround for a bug in OpenSSH 7.4 sshd(8), which
      allows RSA/SHA2 signatures for public key authentication but fails to
      advertise this correctly via SSH2_MSG_EXT_INFO. This causes clients of
      these server to incorrectly match PubkeyAcceptedAlgorithms and
      potentially refuse to offer valid keys.
    - sftp(1)/scp(1): degrade gracefully if a sftp-server offers the
      <email address hidden> extension but fails when the client tries to invoke
      it.
    - ssh(1): allow ssh_config SetEnv to override $TERM, which is otherwise
      handled specially by the protocol. Useful in ~/.ssh/config to set TERM
      to something generic (e.g. "xterm" instead of "xterm-256color") for
      destinations that lack terminfo entries.
    - sftp-server(8): the <email address hidden> extension was incorrectly
      marked as an operation that writes to the filesystem, which made it
      unavailable in sftp-server read-only mode.
    - ssh(1): fix SEGV in UpdateHostkeys debug() message, triggered when the
      update removed more host keys than remain present.
    - Many manual page fixes.
    - sshd(8): handle GIDs > 2^31 in getgrouplist. When compiled in 32bit
      mode, the getgrouplist implementation may fail for GIDs greater than
      LONG_MAX.
    - ssh(1): xstrdup environment variable used by ForwardAgent.
    - sshd(8): don't sigdie() in signal handler in privsep child process;
      this can end up causing sandbox violations.
  * New upstream release (https://www.openssh.com/releasenotes.html#8.6p1):
    - sftp-server(8): add a new <email address hidden> protocol extension that
      allows a client to discover various server limits, including maximum
      packet size and maximum read/write length.
    - sftp(1): use the new <email address hidden> extension (when available) to
      select better transfer lengths in the client.
    - sshd(8): Add ModuliFile keyword to sshd_config to specify the location
      of the "moduli" file containing the groups for DH-GEX.
    - ssh_config(5), sshd_config(5): sync CASignatureAlgorithms lists in
      manual pages with the current default.
    - ssh(1): ensure that pkcs11_del_provider() is called before exit.
    - ssh(1), sshd(8): fix problems in string->argv conversion. Multiple
      backslashes were not being dequoted correctly and quoted space in the
      middle of a string was being incorrectly split.
    - ssh(1): return non-zero exit status when killed by signal.
    - sftp-server(8): increase maximum SSH2_FXP_READ to match the maximum
      packet size. Also handle zero-length reads that are not explicitly
      banned by the spec.
    - sshd(8): don't mistakenly exit on transient read errors on the network
      socket (e.g. EINTR, EAGAIN).
    - Create a dedicated contrib/gnome-ssk-askpass3.c source instead of
      building it from the same file as used for GNOME2. Use the GNOME3
      gdk_seat_grab() to manage keyboard/mouse/server grabs for better
      compatibility with Wayland.
    - sshd(8): soft-disallow the fstatat64 syscall in the Linux seccomp-bpf
      sandbox.
  * New upstream release (https://www.openssh.com/releasenotes.html#8.5p1):
    - ssh(1), sshd(8): change the first-preference signature algorithm from
      ECDSA to ED25519.
    - ssh(1), sshd(8): set the TOS/DSCP specified in the configuration for
      interactive use prior to TCP connect.
    - ssh(1), sshd(8): remove the pre-standardization cipher
      <email address hidden>.
    - ssh(1), sshd(8): update/replace the experimental post-quantum hybrid
      key exchange method based on Streamlined NTRU Prime coupled with
      X25519.
    - ssh(1): disable CheckHostIP by default. It provides insignificant
      benefits while making key rotation significantly more difficult,
      especially for hosts behind IP-based load-balancers (closes: #764027).
    - ssh(1): enable UpdateHostkeys by default subject to some conservative
      preconditions (closes: #875532):
      + The key was matched in the UserKnownHostsFile (and not in the
        GlobalKnownHostsFile).
      + The same key does not exist under another name.
      + A certificate host key is not in use.
      + known_hosts contains no matching wildcard hostname pattern.
      + VerifyHostKeyDNS is not enabled.
      + The default UserKnownHostsFile is in use.
      We expect some of these conditions will be modified or relaxed in
      future.
    - ssh(1), sshd(8): add a new LogVerbose configuration directive that
      allows forcing maximum debug logging by file/function/line
      pattern-lists.
    - ssh(1): when prompting the user to accept a new hostkey, display any
      other host names/addresses already associated with the key.
    - ssh(1): allow UserKnownHostsFile=none to indicate that no known_hosts
      file should be used to identify host keys.
    - ssh(1): add a ssh_config KnownHostsCommand option that allows the
      client to obtain known_hosts data from a command in addition to the
      usual files.
    - ssh(1): add a ssh_config PermitRemoteOpen option that allows the
      client to restrict the destination when RemoteForward is used with
      SOCKS.
    - ssh(1): for FIDO keys, if a signature operation fails with a
      "incorrect PIN" reason and no PIN was initially requested from the
      user, then request a PIN and retry the operation. This supports some
      biometric devices that fall back to requiring PIN when reading of the
      biometric failed, and devices that require PINs for all hosted
      credentials.
    - sshd(8): implement client address-based rate-limiting via new
      sshd_config(5) PerSourceMaxStartups and PerSourceNetBlockSize
      directives that provide more fine-grained control on a per-origin
      address basis than the global MaxStartups limit.
    - ssh(1): Prefix keyboard interactive prompts with "(user@host)" to make
      it easier to determine which connection they are associated with in
      cases like scp -3, ProxyJump, etc. (closes: #343267).
    - sshd(8): fix sshd_config SetEnv directives located inside Match
      blocks.
    - ssh(1): when requesting a FIDO token touch on stderr, inform the user
      once the touch has been recorded.
    - ssh(1): prevent integer overflow when ridiculously large
      ConnectTimeout values are specified, capping the effective value (for
      most platforms) at 24 days.
    - ssh(1): consider the ECDSA key subtype when ordering host key
      algorithms in the client.
    - ssh(1), sshd(8): rename the PubkeyAcceptedKeyTypes keyword to
      PubkeyAcceptedAlgorithms. The previous name incorrectly suggested that
      it control allowed key algorithms, when this option actually specifies
      the signature algorithms that are accepted. The previous name remains
      available as an alias (closes: #933665).
    - ssh(1), sshd(8): similarly, rename HostbasedKeyTypes (ssh) and
      HostbasedAcceptedKeyTypes (sshd) to HostbasedAcceptedAlgorithms.
    - sftp-server(8): add missing <email address hidden> documentation and
      advertisement in the server's SSH2_FXP_VERSION hello packet.
    - ssh(1), sshd(8): more strictly enforce KEX state-machine by banning
      packet types once they are received. Fixes memleak caused by duplicate
      SSH2_MSG_KEX_DH_GEX_REQUEST.
    - sftp(1): allow the full range of UIDs/GIDs for chown/chgrp on 32bit
      platforms instead of being limited by LONG_MAX.
    - Minor man page fixes (capitalization, commas, etc.)
    - sftp(1): when doing an sftp recursive upload or download of a
      read-only directory, ensure that the directory is created with write
      and execute permissions in the interim so that the transfer can
      actually complete, then set the directory permission as the final
      step.
    - ssh-keygen(1): document the -Z, check the validity of its argument
      earlier and provide a better error message if it's not correct.
    - ssh(1): ignore comments at the end of config lines in ssh_config,
      similar to what we already do for sshd_config.
    - sshd_config(5): mention that DisableForwarding is valid in a
      sshd_config Match block.
    - sftp(1): fix incorrect sorting of "ls -ltr" under some circumstances.
    - ssh(1), sshd(8): fix potential integer truncation of (unlikely)
      timeout values.
    - ssh(1): make hostbased authentication send the signature algorithm in
      its SSH2_MSG_USERAUTH_REQUEST packets instead of the key type. This
      make HostbasedAcceptedAlgorithms do what it is supposed to - filter on
      signature algorithm and not key type.
    - sshd(8): add a number of platform-specific syscalls to the Linux
      seccomp-bpf sandbox.
    - sshd(8): remove debug message from sigchld handler that could cause
      deadlock on some platforms.
    - Sync contrib/ssh-copy-id with upstream.
  * Remove OpenBSD-specific rdomain references from sshd_config(5) (closes:
    #998069).
  * Define MAXHOSTNAMELEN on GNU/Hurd (thanks, Svante Signell; closes:
    #997030).
  * Build-depend on libelogind-dev as an alternative to libsystemd-dev on
    Linux (thanks, Svante Signell; closes: #997035).
  * Backport from upstream:
    - CVE-2021-41617 (closes: #995130): sshd(8) from OpenSSH 6.2 through 8.7
      failed to correctly initialise supplemental groups when executing an
      AuthorizedKeysCommand or AuthorizedPrincipalsCommand, where a
      AuthorizedKeysCommandUser or AuthorizedPrincipalsCommandUser directive
      has been set to run the command as a different user. Instead these
      commands would inherit the groups that sshd(8) was started with.
  * Configure with ac_cv_func_closefrom=no to avoid an incompatibility with
    glibc 2.34's fallback_closefrom function (thanks, William 'jawn-smith'
    Wilson; LP: #1944621).

 -- Colin Watson <email address hidden>  Sat, 06 Nov 2021 12:23:47 +0000

Upload details

Uploaded by:
Debian OpenSSH Maintainers
Uploaded to:
Sid
Original maintainer:
Debian OpenSSH Maintainers
Architectures:
any all
Section:
net
Urgency:
Medium Urgency

See full publishing history Publishing

Series Pocket Published Component Section

Downloads

File Size SHA-256 Checksum
openssh_8.7p1-1.dsc 3.3 KiB d3b668e42f2af28f75557587ec34c3c4345ed397564cc8215dafaad8b45ab789
openssh_8.7p1.orig.tar.gz 1.7 MiB 7ca34b8bb24ae9e50f33792b7091b3841d7e1b440ff57bc9fabddf01e2ed1e24
openssh_8.7p1.orig.tar.gz.asc 833 bytes bb18c454a3e5d3738cb26a1c89e17c467d7a59529ec92251b26461ae04771eba
openssh_8.7p1-1.debian.tar.xz 181.6 KiB 7c6ad0691cceffca8a0f91dd3145f783b9f889bae6d1dae8c7c3dce7e2070c31

No changes file available.

Binary packages built by this source

openssh-client: secure shell (SSH) client, for secure access to remote machines

 This is the portable version of OpenSSH, a free implementation of
 the Secure Shell protocol as specified by the IETF secsh working
 group.
 .
 Ssh (Secure Shell) is a program for logging into a remote machine
 and for executing commands on a remote machine.
 It provides secure encrypted communications between two untrusted
 hosts over an insecure network. X11 connections and arbitrary TCP/IP
 ports can also be forwarded over the secure channel.
 It can be used to provide applications with a secure communication
 channel.
 .
 This package provides the ssh, scp and sftp clients, the ssh-agent
 and ssh-add programs to make public key authentication more convenient,
 and the ssh-keygen, ssh-keyscan, ssh-copy-id and ssh-argv0 utilities.
 .
 In some countries it may be illegal to use any encryption at all
 without a special permit.
 .
 ssh replaces the insecure rsh, rcp and rlogin programs, which are
 obsolete for most purposes.

openssh-client-dbgsym: debug symbols for openssh-client
openssh-server: secure shell (SSH) server, for secure access from remote machines

 This is the portable version of OpenSSH, a free implementation of
 the Secure Shell protocol as specified by the IETF secsh working
 group.
 .
 Ssh (Secure Shell) is a program for logging into a remote machine
 and for executing commands on a remote machine.
 It provides secure encrypted communications between two untrusted
 hosts over an insecure network. X11 connections and arbitrary TCP/IP
 ports can also be forwarded over the secure channel.
 It can be used to provide applications with a secure communication
 channel.
 .
 This package provides the sshd server.
 .
 In some countries it may be illegal to use any encryption at all
 without a special permit.
 .
 sshd replaces the insecure rshd program, which is obsolete for most
 purposes.

openssh-server-dbgsym: debug symbols for openssh-server
openssh-sftp-server: secure shell (SSH) sftp server module, for SFTP access from remote machines

 This is the portable version of OpenSSH, a free implementation of
 the Secure Shell protocol as specified by the IETF secsh working
 group.
 .
 Ssh (Secure Shell) is a program for logging into a remote machine
 and for executing commands on a remote machine.
 It provides secure encrypted communications between two untrusted
 hosts over an insecure network. X11 connections and arbitrary TCP/IP
 ports can also be forwarded over the secure channel.
 It can be used to provide applications with a secure communication
 channel.
 .
 This package provides the SFTP server module for the SSH server. It
 is needed if you want to access your SSH server with SFTP. The SFTP
 server module also works with other SSH daemons like dropbear.
 .
 OpenSSH's sftp and sftp-server implement revision 3 of the SSH filexfer
 protocol described in:
 .
  http://www.openssh.com/txt/draft-ietf-secsh-filexfer-02.txt
 .
 Newer versions of the draft will not be supported, though some features
 are individually implemented as extensions.

openssh-sftp-server-dbgsym: debug symbols for openssh-sftp-server
openssh-tests: OpenSSH regression tests

 This package provides OpenSSH's regression test suite. It is mainly
 intended for use with the autopkgtest system, though can also be run
 directly using /usr/lib/openssh/regress/run-tests.

openssh-tests-dbgsym: debug symbols for openssh-tests
ssh: secure shell client and server (metapackage)

 This metapackage is a convenient way to install both the OpenSSH client
 and the OpenSSH server. It provides nothing in and of itself, so you
 may remove it if nothing depends on it.

ssh-askpass-gnome: interactive X program to prompt users for a passphrase for ssh-add

 This has been split out of the main openssh-client package so that
 openssh-client does not need to depend on GTK+.
 .
 You probably want the ssh-askpass package instead, but this is
 provided to add to your choice and/or confusion.

ssh-askpass-gnome-dbgsym: debug symbols for ssh-askpass-gnome