"e2eaudio" test failed on Origen, Snowball & vexpress ubuntu image.

Bug #1009326 reported by Botao
6
This bug affects 1 person
Affects Status Importance Assigned to Milestone
Linaro Ubuntu
Won't Fix
Low
Unassigned
linaro-landing-team-samsung
Won't Fix
Low
Unassigned

Bug Description

On hardware pack:

http://snapshots.linaro.org/precise/hwpacks/leb-origen/131/hwpack_linaro-leb-origen_20120604-131_armhf_supported.tar.gz

with ubuntu image:

http://snapshots.linaro.org/precise/images/ubuntu-desktop/193/linaro-precise-ubuntu-desktop-20120601-193.tar.gz

The "e2eaudio" test failed. Refer to the logout below, or the link to the LAVA web page:

http://validation.linaro.org/lava-server/dashboard/streams/private/team/linaro/pre-built-leb-origen/bundles/dad8335b4c8ae83990908d20238fc58c25c360f9/6d28f1a4-ae9c-11e1-b0b1-a00bba6efd4a/attachments/77858/

e2eaudiotest: Unknown device, no configuration done
speaker-test 1.0.25
Playback device is default
Stream parameters are 48000Hz, S16_LE, 1 channels
Sine wave rate is 440.0000Hz
Rate set to 48000Hz (requested 48000Hz)
Buffer size range from 192 to 2097152
Period size range from 64 to 699051
Using max buffer size 2097152
Periods = 4
was set period_size = 524288
was set buffer_size = 2097152
0 - Front Left
Freq: 1Hz
e2eaudiotest failed to detect a sinewave at 440 Hz
e2eaudiotest: fail 440 sinewave not detected

Revision history for this message
Botao (botao-sun) wrote :
Revision history for this message
Botao (botao-sun) wrote : Re: "e2eaudio" test failed on Origen & Snowball ubuntu image.
summary: - "e2eaudio" test failed on Origen ubuntu image.
+ "e2eaudio" test failed on Origen & Snowball ubuntu image.
Revision history for this message
Botao (botao-sun) wrote :
summary: - "e2eaudio" test failed on Origen & Snowball ubuntu image.
+ "e2eaudio" test failed on Origen, Snowball & vexpress ubuntu image.
Revision history for this message
Botao (botao-sun) wrote :
Revision history for this message
Botao (botao-sun) wrote :
Revision history for this message
Botao (botao-sun) wrote :
Revision history for this message
Botao (botao-sun) wrote :
Revision history for this message
Botao (botao-sun) wrote :
Revision history for this message
Botao (botao-sun) wrote :
Revision history for this message
Fathi Boudra (fboudra) wrote :

vexpress just received audio loopback cables. we'll see the results on next test run.

Revision history for this message
Fathi Boudra (fboudra) wrote :

On Origen, the test isn't run at all:
LAVA: (stdout) e2eaudiotest: Unknown device, no configuration done.

See http://validation.linaro.org/lava-server/scheduler/job/27891/log_file

Revision history for this message
Fathi Boudra (fboudra) wrote :

On Snowball, similar issue:
e2eaudiotest: Unknown device, no configuration done
e2eaudiotest: fail 440 sinewave not detected

Fathi Boudra (fboudra)
Changed in linaro-ubuntu:
status: New → Triaged
importance: Undecided → Low
Changed in igloocommunity:
importance: Undecided → Low
Revision history for this message
Botao (botao-sun) wrote :
Revision history for this message
Botao (botao-sun) wrote :

For vexpress board, on hardware pack:

http://snapshots.linaro.org/precise/hwpacks/vexpress/230/hwpack_linaro-vexpress_20120814-230_armhf_supported.tar.gz

with ubuntu image:

http://snapshots.linaro.org/precise/images/ubuntu-desktop/352/linaro-precise-ubuntu-desktop-20120814-352.tar.gz

LAVA Job ID is:

http://validation.linaro.org/lava-server/scheduler/job/29308

"e2eaudiotest" failed, detailed log output can be found here:

http://validation.linaro.org/lava-server/dashboard/streams/private/team/linaro/pre-built-vexpress/bundles/ef63b878b8ad043478ecdb7600086e233dcc16b2/004e3e7a-e675-11e1-b57e-0002f7003cc2/

http://validation.linaro.org/lava-server/dashboard/streams/private/team/linaro/pre-built-vexpress/bundles/ef63b878b8ad043478ecdb7600086e233dcc16b2/004e3e7a-e675-11e1-b57e-0002f7003cc2/attachments/120486/

e2eaudiotest: Unknown device, no configuration done
speaker-test 1.0.25
Playback device is default
Stream parameters are 48000Hz, S16_LE, 1 channels
Sine wave rate is 440.0000Hz
Rate set to 48000Hz (requested 48000Hz)
Buffer size range from 192 to 2097152
Period size range from 64 to 699051
Using max buffer size 2097152
Periods = 4
was set period_size = 524288
was set buffer_size = 2097152
0 - Front Left
Freq: 1Hz
e2eaudiotest failed to detect a sinewave at 440 Hz
e2eaudiotest: fail 440 sinewave not detected

Changed in linaro-landing-team-samsung:
importance: Undecided → Low
Anmar Oueja (anmar)
Changed in linaro-landing-team-samsung:
status: New → Won't Fix
Changed in linaro-landing-team-arm:
importance: Undecided → Low
Fathi Boudra (fboudra)
no longer affects: igloocommunity
Changed in linaro-ubuntu:
status: Triaged → Won't Fix
Ryan Harkin (ryanharkin)
Changed in linaro-landing-team-arm:
status: New → Won't Fix
Revision history for this message
Ryan Harkin (ryanharkin) wrote :

Passing this test requires audio loopback cables to be installed on the Versatile Express boards.

Ryan Harkin (ryanharkin)
no longer affects: linaro-landing-team-arm
To post a comment you must log in.
This report contains Public information  
Everyone can see this information.

Other bug subscribers

Remote bug watches

Bug watches keep track of this bug in other bug trackers.