SD / MMC test failed on STE Snowball with Linux Linaro image.

Bug #1103225 reported by Botao
8
This bug affects 1 person
Affects Status Importance Assigned to Milestone
Linaro Linux Baseline
Triaged
Low
Unassigned

Bug Description

On STE Snowball board with Linux Linaro image:

http://snapshots.linaro.org/quantal/pre-built/snowball/51/snowball-quantal_developer_20130121-51.img.gz

SD / MMC test failed, many error occurred during the boot process. According to the test case description (https://wiki.linaro.org/Platform/QA/TestCases/LinuxLinaroUbuntu#Test_Cases), there should be no I/O error exists.

Please refer to attachment to get full error information.

###########################################################
This issue is observed on following images:
http://snapshots.linaro.org/quantal/pre-built/snowball/51/snowball-quantal_developer_20130121-51.img.gz
http://snapshots.linaro.org/quantal/pre-built/snowball/58/snowball-quantal_developer_20130128-58.img.gz
http://snapshots.linaro.org/quantal/pre-built/snowball/68/snowball-quantal_developer_20130204-68.img.gz
http://snapshots.linaro.org/quantal/pre-built/snowball/72/snowball-quantal_developer_20130209-72.img.gz
http://snapshots.linaro.org/quantal/pre-built/snowball/249/snowball-quantal_developer_20130217-249.img.gz
http://snapshots.linaro.org/quantal/pre-built/snowball/256/snowball-quantal_developer_20130224-256.img.gz
http://snapshots.linaro.org/quantal/pre-built/snowball/269/snowball-quantal_developer_20130315-269.img.gz
http://snapshots.linaro.org/quantal/pre-built/snowball/282/snowball-quantal_developer_20130403-282.img.gz
http://snapshots.linaro.org/quantal/pre-built/snowball/286/snowball-quantal_developer_20130408-286.img.gz
http://snapshots.linaro.org/raring/hwpacks/snowball/323/hwpack_linaro-snowball_20130508-323_armhf_supported.tar.gz and http://snapshots.linaro.org/raring/images/developer/360/linaro-raring-developer-20130508-360.tar.gz
http://snapshots.linaro.org/raring/pre-built/snowball/336/snowball-raring_developer_20130520-336.img.gz
http://snapshots.linaro.org/raring/pre-built/snowball/354/snowball-raring_developer_20130604-354.img.gz
http://snapshots.linaro.org/raring/pre-built/snowball/363/snowball-raring_developer_20130613-363.img.gz
http://snapshots.linaro.org/raring/pre-built/snowball/370/snowball-raring_developer_20130618-370.img.gz
http://snapshots.linaro.org/ubuntu/pre-built/snowball/376/snowball-raring_developer_20130623-376.img.gz

Revision history for this message
Botao (botao-sun) wrote :
Botao (botao-sun)
description: updated
Botao (botao-sun)
description: updated
Botao (botao-sun)
description: updated
Botao (botao-sun)
description: updated
Botao (botao-sun)
description: updated
Botao (botao-sun)
description: updated
Revision history for this message
Botao (botao-sun) wrote :

On STE Snowball board with Linux Linaro ubuntu image:

http://snapshots.linaro.org/quantal/pre-built/snowball/278/snowball-quantal_developer_20130328-278.img.gz

Now this bug can be considered fixed:

root@localhost:~# dmesg | grep error
[ 6.227447] EXT4-fs (mmcblk0p2): re-mounted. Opts: errors=remount-ro
root@localhost:~#

Changed in linaro-linux-baseline:
status: New → Fix Released
Revision history for this message
Botao (botao-sun) wrote :

On STE Snowball board with Linux Linaro ubuntu image:

http://snapshots.linaro.org/quantal/pre-built/snowball/282/snowball-quantal_developer_20130403-282.img.gz

Now some I/O errors are observed again:

root@localhost:~# dmesg | grep error
[ 3.384002] end_request: I/O error, dev mmcblk1, sector 7405304
[ 3.390411] Buffer I/O error on device mmcblk1, logical block 925663
[ 5.597137] EXT4-fs (mmcblk0p2): re-mounted. Opts: errors=remount-ro
[ 7.210144] end_request: I/O error, dev mmcblk1, sector 7405304
[ 7.255187] Buffer I/O error on device mmcblk1, logical block 925663
root@localhost:~#

description: updated
Changed in linaro-linux-baseline:
status: Fix Released → New
Botao (botao-sun)
description: updated
Revision history for this message
Botao (botao-sun) wrote :

On STE Snowball board with Linux Linaro ubuntu image:

http://snapshots.linaro.org/quantal/pre-built/snowball/290/snowball-quantal_developer_20130414-290.img.gz

This issue now looks much better, only two I/O error messages observed:

root@localhost:~# dmesg | grep error
[ 5.486328] EXT4-fs (mmcblk0p2): re-mounted. Opts: errors=remount-ro
[ 6.936401] end_request: I/O error, dev mmcblk1, sector 7405304
[ 6.943939] Buffer I/O error on device mmcblk1, logical block 925663
root@localhost:~#

Revision history for this message
Botao (botao-sun) wrote :

On STE Snowball board with Linux Linaro image:

http://snapshots.linaro.org/quantal/pre-built/snowball/299/snowball-quantal_developer_20130423-299.img.gz

No I/O error observed related to SD/MMC. This bug now can be considered as "Fix Released".

Changed in linaro-linux-baseline:
status: New → Fix Released
Revision history for this message
Botao (botao-sun) wrote :

On STE Snowball board with Linux Linaro Raring ubuntu image:

Hardware Pack: http://snapshots.linaro.org/raring/hwpacks/snowball/323/hwpack_linaro-snowball_20130508-323_armhf_supported.tar.gz

Rootfs: http://snapshots.linaro.org/raring/images/developer/360/linaro-raring-developer-20130508-360.tar.gz

I/O error got observed again:

root@localhost:~# dmesg | grep error
[ 2.851959] end_request: I/O error, dev mmcblk1, sector 7405304
[ 2.890930] Buffer I/O error on device mmcblk1, logical block 925663
[ 5.808319] EXT4-fs (mmcblk0p2): re-mounted. Opts: errors=remount-ro
[ 5.825683] mmci-pl18x sdi0: error during DMA transfer!
[ 5.838073] mmcblk0: command error, retrying timeout
[ 7.037689] end_request: I/O error, dev mmcblk1boot1, sector 3832
[ 7.067871] Buffer I/O error on device mmcblk1boot1, logical block 479
root@localhost:~#

Changed in linaro-linux-baseline:
status: Fix Released → New
Revision history for this message
Botao (botao-sun) wrote :

On STE Snowball board with Linux Linaro Raring ubuntu image:

http://snapshots.linaro.org/raring/pre-built/snowball/336/snowball-raring_developer_20130520-336.img.gz

Many CRC errors show up in serial console, please refer to attachment for full output.

Revision history for this message
Botao (botao-sun) wrote :

On STE Snowball board with Linux Linaro ubuntu image:

http://snapshots.linaro.org/ubuntu/pre-built/snowball/344/snowball-raring_developer_20130526-344.img.gz

No I/0 error got observed. This issue now can be considered as "Fix Released":

root@localhost:~# dmesg | grep error
[ 2.473510] db8500-thermal: probe of 801573c0.thermal failed with error -16
[ 2.976257] mmci-pl18x sdi0: error during DMA transfer!
[ 2.982604] mmcblk0: error -110 sending stop command, original cmd response 0x0, card status 0xc00b00
[ 2.996551] mmcblk0: error -70 transferring data, sector 15523712, nr 8, cmd response 0x0, card status 0xb00
[ 5.717834] EXT4-fs (mmcblk0p2): re-mounted. Opts: errors=remount-ro
root@localhost:~#

Changed in linaro-linux-baseline:
status: New → Fix Released
Fathi Boudra (fboudra)
Changed in linaro-linux-baseline:
milestone: none → 13.05
Revision history for this message
Botao (botao-sun) wrote :

On STE Snowball board with Linux Linaro ubuntu image:

http://snapshots.linaro.org/raring/pre-built/snowball/354/snowball-raring_developer_20130604-354.img.gz

A Buffer I/O error got observed:

root@localhost:~# dmesg | grep error
[ 2.473571] db8500-thermal: probe of 801573c0.thermal failed with error -16
[ 6.050140] EXT4-fs (mmcblk0p2): re-mounted. Opts: errors=remount-ro
[ 7.284118] end_request: I/O error, dev mmcblk1, sector 7405304
[ 7.331237] Buffer I/O error on device mmcblk1, logical block 925663
root@localhost:~#

The status of this bug will be changed to "New" again.

Changed in linaro-linux-baseline:
status: Fix Released → New
Botao (botao-sun)
description: updated
Fathi Boudra (fboudra)
Changed in linaro-linux-baseline:
status: New → Triaged
importance: Undecided → Low
Botao (botao-sun)
description: updated
Botao (botao-sun)
description: updated
To post a comment you must log in.
This report contains Public information  
Everyone can see this information.

Other bug subscribers

Related blueprints

Remote bug watches

Bug watches keep track of this bug in other bug trackers.