Here is My computer Specs
Gigabyte 8vm800m
Pentium 4 3.0Ghz
Samsung 20GB (IDE)
Maxtor 200GB (SATA)
Liteon DVDRW
Generic 1024 DDR400 RAM
ATI 9200SE 128RAM Video card
Maxtor Hard disk have two partition
30GB for Windows XP (NTFS)
170GB for Data (NTFS)
Please notes that, when I had disabled DVDRW from BIOS, It saved the boot up time by almost 50 seconds.
lspci
00:00.0 Host bridge: VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro Host Bridge
00:00.1 Host bridge: VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro Host Bridge
00:00.2 Host bridge: VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro Host Bridge
00:00.3 Host bridge: VIA Technologies, Inc. PT890 Host Bridge
00:00.4 Host bridge: VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro Host Bridge
00:00.7 Host bridge: VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro Host Bridge
00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI Bridge
00:0f.0 IDE interface: VIA Technologies, Inc. VIA VT6420 SATA RAID Controller (rev 80)
00:0f.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
00:10.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
00:10.4 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 86)
00:11.0 ISA bridge: VIA Technologies, Inc. VT8237 ISA bridge [KT600/K8T800/K8T890 South]
00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 60)
00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 78)
01:00.0 VGA compatible controller: ATI Technologies Inc RV280 [Radeon 9200 SE] (rev 01)
uname -a
2.6.20-15-generic #2 SMP Sun Apr 15 07:36:31 UTC 2007 i686 GNU/Linux
dmesg > dmesg.log
[ 0.000000] Linux version 2.6.20-15-generic (root@palmer) (gcc version 4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #2 SMP Sun Apr 15 07:36:31 UTC 2007 (Ubuntu 2.6.20-15.27-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] sanitize start
[ 0.000000] sanitize end
[ 0.000000] copy_e820_map() start: 0000000000000000 size: 000000000009f800 end: 000000000009f800 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 000000000009f800 size: 0000000000000800 end: 00000000000a0000 type: 2
[ 0.000000] copy_e820_map() start: 00000000000f0000 size: 0000000000010000 end: 0000000000100000 type: 2
[ 0.000000] copy_e820_map() start: 0000000000100000 size: 000000003fef0000 end: 000000003fff0000 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 000000003fff0000 size: 0000000000003000 end: 000000003fff3000 type: 4
[ 0.000000] copy_e820_map() start: 000000003fff3000 size: 000000000000d000 end: 0000000040000000 type: 3
[ 0.000000] copy_e820_map() start: 00000000fec00000 size: 0000000001400000 end: 0000000100000000 type: 2
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
[ 0.000000] BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] 127MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] found SMP MP-table at 000f50a0
[ 0.000000] Entering add_active_range(0, 0, 262128) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 229376
[ 0.000000] HighMem 229376 -> 262128
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 262128
[ 0.000000] On node 0 totalpages: 262128
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1760 pages used for memmap
[ 0.000000] Normal zone: 223520 pages, LIFO batch:31
[ 0.000000] HighMem zone: 255 pages used for memmap
[ 0.000000] HighMem zone: 32497 pages, LIFO batch:7
[ 0.000000] DMI 2.3 present.
[ 0.000000] ACPI: RSDP (v000 P4M80P ) @ 0x000f6a00
[ 0.000000] ACPI: RSDT (v001 P4M80P AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x3fff3000
[ 0.000000] ACPI: FADT (v001 P4M80P AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x3fff3040
[ 0.000000] ACPI: MADT (v001 P4M80P AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x3fff6200
[ 0.000000] ACPI: DSDT (v001 P4M80P AWRDACPI 0x00001000 MSFT 0x0100000c) @ 0x00000000
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 15:4 APIC version 20
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] Processor #1 15:4 APIC version 20
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000)
[ 0.000000] Detected 3000.324 MHz processor.
[ 21.548661] Built 1 zonelists. Total pages: 260081
[ 21.548667] Kernel command line: root=UUID=1fda357d-780c-4dde-949f-ac0798a23f68 ro quiet splash
[ 21.548837] mapped APIC to ffffd000 (fee00000)
[ 21.548840] mapped IOAPIC to ffffc000 (fec00000)
[ 21.548843] Enabling fast FPU save and restore... done.
[ 21.548846] Enabling unmasked SIMD FPU exception support... done.
[ 21.548860] Initializing CPU#0
[ 21.548964] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 21.550066] Console: colour VGA+ 80x25
[ 21.550805] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 21.551391] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 21.575240] Memory: 1028316k/1048512k available (1992k kernel code, 19464k reserved, 893k data, 328k init, 131008k highmem)
[ 21.575252] virtual kernel memory layout:
[ 21.575254] fixmap : 0xfff4e000 - 0xfffff000 ( 708 kB)
[ 21.575255] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 21.575256] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
[ 21.575257] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 21.575258] .init : 0xc03d7000 - 0xc0429000 ( 328 kB)
[ 21.575259] .data : 0xc02f2264 - 0xc03d16d4 ( 893 kB)
[ 21.575260] .text : 0xc0100000 - 0xc02f2264 (1992 kB)
[ 21.575263] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 21.652880] Calibrating delay using timer specific routine.. 6007.73 BogoMIPS (lpj=12015461)
[ 21.652931] Security Framework v1.0.0 initialized
[ 21.652941] SELinux: Disabled at boot.
[ 21.652958] Mount-cache hash table entries: 512
[ 21.653138] CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 0000441d 00000000 00000000
[ 21.653147] monitor/mwait feature present.
[ 21.653149] using mwait in idle threads.
[ 21.653156] CPU: Trace cache: 12K uops, L1 D cache: 16K
[ 21.653159] CPU: L2 cache: 1024K
[ 21.653162] CPU: Physical Processor ID: 0
[ 21.653164] CPU: After all inits, caps: bfebfbff 00000000 00000000 00003180 0000441d 00000000 00000000
[ 21.653178] Compat vDSO mapped to ffffe000.
[ 21.653185] Remapping vsyscall page to ffffe000
[ 21.653202] Checking 'hlt' instruction... OK.
[ 21.669020] SMP alternatives: switching to UP code
[ 21.669607] Early unpacking initramfs... done
[ 21.939770] ACPI: Core revision 20060707
[ 21.943808] ACPI: Looking for DSDT in initramfs... file /DSDT.aml not found, using machine DSDT.
[ 21.963682] CPU0: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 01
[ 21.963705] SMP alternatives: switching to SMP code
[ 21.963867] Booting processor 1/1 eip 3000
[ 21.974292] Initializing CPU#1
[ 22.052524] Calibrating delay using timer specific routine.. 6000.69 BogoMIPS (lpj=12001399)
[ 22.052535] CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 0000441d 00000000 00000000
[ 22.052542] monitor/mwait feature present.
[ 22.052549] CPU: Trace cache: 12K uops, L1 D cache: 16K
[ 22.052551] CPU: L2 cache: 1024K
[ 22.052554] CPU: Physical Processor ID: 0
[ 22.052556] CPU: After all inits, caps: bfebfbff 00000000 00000000 00003180 0000441d 00000000 00000000
[ 22.052931] CPU1: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 01
[ 22.052976] Total of 2 processors activated (12008.43 BogoMIPS).
[ 22.053735] ENABLING IO-APIC IRQs
[ 22.054057] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 22.200411] checking TSC synchronization across 2 CPUs: passed.
[ 0.003993] Brought up 2 CPUs
[ 0.178076] migration_cost=165
[ 0.178381] Booting paravirtualized kernel on bare hardware
[ 0.178486] Time: 22:02:43 Date: 04/12/107
[ 0.178520] NET: Registered protocol family 16
[ 0.178617] EISA bus registered
[ 0.178623] ACPI: bus type pci registered
[ 0.186597] PCI: PCI BIOS revision 2.10 entry at 0xfaf00, last bus=1
[ 0.186600] PCI: Using configuration type 1
[ 0.186602] Setting up standard PCI resources
[ 0.200307] ACPI: Interpreter enabled
[ 0.200311] ACPI: Using IOAPIC for interrupt routing
[ 0.200899] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.200904] PCI: Probing PCI hardware (bus 00)
[ 0.202148] Boot video device is 0000:01:00.0
[ 0.202210] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.230499] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12)
[ 0.230825] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 10 11 12) *5
[ 0.231154] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 *11 12)
[ 0.231467] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[ 0.231756] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[ 0.232048] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[ 0.232327] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[ 0.232608] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[ 0.233016] ACPI: PCI Interrupt Link [ALKA] (IRQs 20) *0, disabled.
[ 0.233415] ACPI: PCI Interrupt Link [ALKB] (IRQs 21) *0, disabled.
[ 0.233839] ACPI: PCI Interrupt Link [ALKC] (IRQs 22) *0, disabled.
[ 0.234242] ACPI: PCI Interrupt Link [ALKD] (IRQs 23) *0, disabled.
[ 0.236349] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 0.236359] pnp: PnP ACPI init
[ 0.239441] pnp: PnP ACPI: found 12 devices
[ 0.239447] PnPBIOS: Disabled by ACPI PNP
[ 0.239506] PCI: Using ACPI for IRQ routing
[ 0.239509] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 0.250051] NET: Registered protocol family 8
[ 0.250053] NET: Registered protocol family 20
[ 0.250408] pnp: 00:02: ioport range 0x4000-0x407f could not be reserved
[ 0.250412] pnp: 00:02: ioport range 0x40f0-0x40ff could not be reserved
[ 0.250415] pnp: 00:02: ioport range 0x500-0x50f has been reserved
[ 0.250791] PCI: Bridge: 0000:00:01.0
[ 0.250795] IO window: a000-afff
[ 0.250801] MEM window: e8000000-e9ffffff
[ 0.250805] PREFETCH window: d0000000-dfffffff
[ 0.250827] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 0.250865] NET: Registered protocol family 2
[ 0.295795] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.295999] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.296775] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.297459] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.297463] TCP reno registered
[ 0.311902] checking if image is initramfs... it is
[ 0.847890] Freeing initrd memory: 6748k freed
[ 0.848592] audit: initializing netlink socket (disabled)
[ 0.848611] audit(1179007363.568:1): initialized
[ 0.848715] highmem bounce pool size: 64 pages
[ 0.848809] VFS: Disk quotas dquot_6.5.1
[ 0.848833] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.848894] io scheduler noop registered
[ 0.848897] io scheduler anticipatory registered
[ 0.848900] io scheduler deadline registered
[ 0.848913] io scheduler cfq registered (default)
[ 0.848998] PCI: Bypassing VIA 8237 APIC De-Assert Message
[ 0.849239] isapnp: Scanning for PnP cards...
[ 1.200651] isapnp: No Plug & Play device found
[ 1.228522] Real Time Clock Driver v1.12ac
[ 1.228577] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 1.228703] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.228860] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 1.229451] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.229705] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 1.229929] mice: PS/2 mouse device common for all mice
[ 1.230612] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 1.230786] input: Macintosh mouse button emulation as /class/input/input0
[ 1.230830] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 1.230842] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 1.231135] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 1.231138] PNP: PS/2 controller doesn't have AUX irq; using default 12
[ 1.231422] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.231428] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.231571] EISA: Probing bus 0 at eisa.0
[ 1.231593] Cannot allocate resource for EISA slot 4
[ 1.231612] EISA: Detected 0 cards.
[ 1.261691] TCP cubic registered
[ 1.261701] NET: Registered protocol family 1
[ 1.261730] Starting balanced_irq
[ 1.261741] Using IPI No-Shortcut mode
[ 1.261837] input: AT Translated Set 2 keyboard as /class/input/input1
[ 1.261925] ACPI: (supports S0 S1 S4 S5)
[ 1.261975] Magic number: 7:191:47
[ 1.262466] Freeing unused kernel memory: 328k freed
[ 1.262876] Time: tsc clocksource has been installed.
[ 2.505855] Capability LSM initialized
[ 3.040578] usbcore: registered new interface driver usbfs
[ 3.040611] usbcore: registered new interface driver hub
[ 3.093371] usbcore: registered new device driver usb
[ 3.131793] VP_IDE: IDE controller at PCI slot 0000:00:0f.1
[ 3.132329] ACPI: PCI Interrupt Link [ALKA] BIOS reported IRQ 0, using IRQ 20
[ 3.132333] ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 20
[ 3.132343] ACPI: PCI Interrupt 0000:00:0f.1[A] -> Link [ALKA] -> GSI 20 (level, low) -> IRQ 16
[ 3.132358] VP_IDE: chipset revision 6
[ 3.132361] VP_IDE: not 100% native mode: will probe irqs later
[ 3.132377] VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on pci0000:00:0f.1
[ 3.132387] ide0: BM-DMA at 0xc800-0xc807, BIOS settings: hda:pio, hdb:pio
[ 3.132400] Probing IDE interface ide0...
[ 3.145519] via-rhine.c:v1.10-LK1.4.2 Sept-11-2006 Written by Donald Becker
[ 3.146886] USB Universal Host Controller Interface driver v3.0
[ 3.187126] SCSI subsystem initialized
[ 3.243672] libata version 2.20 loaded.
[ 3.564771] hda: SAMSUNG SV2001H, ATA DISK drive
[ 4.016461] hdb: LITE-ON DVDRW SOHW-1673S, ATAPI CD/DVD-ROM drive
[ 4.076953] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 4.078505] ACPI: PCI Interrupt Link [ALKB] BIOS reported IRQ 0, using IRQ 21
[ 4.078509] ACPI: PCI Interrupt Link [ALKB] enabled at IRQ 21
[ 4.078517] ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 17
[ 4.078531] uhci_hcd 0000:00:10.0: UHCI Host Controller
[ 4.078683] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
[ 4.078719] uhci_hcd 0000:00:10.0: irq 17, io base 0x0000cc00
[ 4.078875] usb usb1: configuration #1 chosen from 1 choice
[ 4.078917] hub 1-0:1.0: USB hub found
[ 4.078927] hub 1-0:1.0: 2 ports detected
[ 4.184236] ACPI: PCI Interrupt 0000:00:10.1[A] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 17
[ 4.184261] uhci_hcd 0000:00:10.1: UHCI Host Controller
[ 4.184307] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
[ 4.184334] uhci_hcd 0000:00:10.1: irq 17, io base 0x0000d000
[ 4.184469] usb usb2: configuration #1 chosen from 1 choice
[ 4.184514] hub 2-0:1.0: USB hub found
[ 4.184525] hub 2-0:1.0: 2 ports detected
[ 4.292129] ACPI: PCI Interrupt 0000:00:10.2[B] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 17
[ 4.292149] uhci_hcd 0000:00:10.2: UHCI Host Controller
[ 4.292195] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
[ 4.292222] uhci_hcd 0000:00:10.2: irq 17, io base 0x0000d400
[ 4.292370] usb usb3: configuration #1 chosen from 1 choice
[ 4.292415] hub 3-0:1.0: USB hub found
[ 4.292431] hub 3-0:1.0: 2 ports detected
[ 4.400031] ACPI: PCI Interrupt 0000:00:10.3[B] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 17
[ 4.400052] uhci_hcd 0000:00:10.3: UHCI Host Controller
[ 4.400099] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4
[ 4.400129] uhci_hcd 0000:00:10.3: irq 17, io base 0x0000d800
[ 4.400276] usb usb4: configuration #1 chosen from 1 choice
[ 4.400324] hub 4-0:1.0: USB hub found
[ 4.400335] hub 4-0:1.0: 2 ports detected
[ 4.423855] usb 1-1: new full speed USB device using uhci_hcd and address 2
[ 4.508862] ACPI: PCI Interrupt 0000:00:10.4[C] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 17
[ 4.508884] ehci_hcd 0000:00:10.4: EHCI Host Controller
[ 4.509085] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 5
[ 4.509134] ehci_hcd 0000:00:10.4: irq 17, io mem 0xea000000
[ 4.509143] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 4.509802] usb usb5: configuration #1 chosen from 1 choice
[ 4.510071] hub 5-0:1.0: USB hub found
[ 4.510082] hub 5-0:1.0: 8 ports detected
[ 4.548944] hda: max request size: 128KiB
[ 4.559871] hda: Host Protected Area detected.
[ 4.559874] current capacity is 39177839 sectors (20059 MB)
[ 4.559877] native capacity is 39179952 sectors (20060 MB)
[ 4.560021] hda: Host Protected Area disabled.
[ 4.560026] hda: 39179952 sectors (20060 MB) w/2048KiB Cache, CHS=38869/16/63
[ 4.560134] hda: cache flushes supported
[ 4.560195] hda:<4>ACPI: PCI Interrupt Link [ALKD] BIOS reported IRQ 0, using IRQ 23
[ 4.616318] ACPI: PCI Interrupt Link [ALKD] enabled at IRQ 23
[ 4.616327] ACPI: PCI Interrupt 0000:00:12.0[A] -> Link [ALKD] -> GSI 23 (level, low) -> IRQ 18
[ 4.616426] eth0: VIA Rhine II at 0x1e000, 00:14:85:c4:3b:c0, IRQ 18.
[ 4.617142] eth0: MII PHY found at address 1, status 0x786d advertising 01e1 Link 41e1.
[ 4.617167] sata_via 0000:00:0f.0: version 2.1
[ 4.617190] ACPI: PCI Interrupt 0000:00:0f.0[B] -> Link [ALKA] -> GSI 20 (level, low) -> IRQ 16
[ 4.617214] sata_via 0000:00:0f.0: routed to hard irq line 11
[ 4.617300] ata1: SATA max UDMA/133 cmd 0x0001b000 ctl 0x0001b402 bmdma 0x0001c000 irq 16
[ 4.617340] ata2: SATA max UDMA/133 cmd 0x0001b800 ctl 0x0001bc02 bmdma 0x0001c008 irq 16
[ 4.617361] scsi0 : sata_via
[ 4.823474] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 4.959347] usb 1-1: device not accepting address 2, error -71
[ 4.989463] ATA: abnormal status 0x7F on port 0x0001b007
[ 4.999578] ATA: abnormal status 0x7F on port 0x0001b007
[ 5.012502] ata1.00: ata_hpa_resize 1: sectors = 398297088, hpa_sectors = 398297088
[ 5.012509] ata1.00: ATA-7: Maxtor 6V200E0, VA111630, max UDMA/133
[ 5.012513] ata1.00: 398297088 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 5.024494] ata1.00: ata_hpa_resize 1: sectors = 398297088, hpa_sectors = 398297088
[ 5.024500] ata1.00: configured for UDMA/133
[ 5.043264] scsi1 : sata_via
[ 5.247078] ata2: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
[ 5.257195] ATA: abnormal status 0x7F on port 0x0001b807
[ 5.257337] scsi 0:0:0:0: Direct-Access ATA Maxtor 6V200E0 VA11 PQ: 0 ANSI: 5
[ 5.266195] SCSI device sda: 398297088 512-byte hdwr sectors (203928 MB)
[ 5.266216] sda: Write Protect is off
[ 5.266221] sda: Mode Sense: 00 3a 00 00
[ 5.266246] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.266322] SCSI device sda: 398297088 512-byte hdwr sectors (203928 MB)
[ 5.266338] sda: Write Protect is off
[ 5.266341] sda: Mode Sense: 00 3a 00 00
[ 5.266366] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.266371] sda: sda1 sda2 < sda5 >
[ 5.295518] sd 0:0:0:0: Attached scsi disk sda
[ 5.299906] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 6.701727] usb 1-1: new full speed USB device using uhci_hcd and address 4
[ 6.854793] usb 1-1: configuration #1 chosen from 1 choice
[ 6.857732] hub 1-1:1.0: USB hub found
[ 6.860682] hub 1-1:1.0: 4 ports detected
[ 7.213238] usb 1-2: new full speed USB device using uhci_hcd and address 5
[ 7.412175] usb 1-2: configuration #1 chosen from 1 choice
[ 7.656821] usb 4-1: new full speed USB device using uhci_hcd and address 2
[ 7.822499] usb 4-1: configuration #1 chosen from 1 choice
[ 8.050360] usb 1-1.1: new low speed USB device using uhci_hcd and address 6
[ 8.206301] usb 1-1.1: configuration #1 chosen from 1 choice
[ 8.437931] usb 1-1.4: new full speed USB device using uhci_hcd and address 7
[ 8.558792] usb 1-1.4: not running at top speed; connect to a high speed hub
[ 8.600873] usb 1-1.4: configuration #1 chosen from 1 choice
[ 8.606783] usbcore: registered new interface driver hiddev
[ 8.621853] input: Microsoft Microsoft Wheel Mouse Optical� as /class/input/input2
[ 8.621888] input: USB HID v1.00 Mouse [Microsoft Microsoft Wheel Mouse Optical�] on usb-0000:00:10.0-1.1
[ 8.621912] usbcore: registered new interface driver usbhid
[ 8.621918] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[ 8.622078] usbcore: registered new interface driver libusual
[ 8.629313] Initializing USB Mass Storage driver...
[ 8.629414] scsi2 : SCSI emulation for USB Mass Storage devices
[ 8.629497] usbcore: registered new interface driver usb-storage
[ 8.629502] USB Mass Storage support registered.
[ 8.629630] usb-storage: device found at 7
[ 8.629633] usb-storage: waiting for device to settle before scanning
[ 13.629195] usb-storage: device scan complete
[ 13.632213] scsi 2:0:0:0: Direct-Access Generic USB Flash Disk PMAP PQ: 0 ANSI: 0 CCS
[ 13.637168] SCSI device sdb: 2007040 512-byte hdwr sectors (1028 MB)
[ 13.640162] sdb: Write Protect is off
[ 13.640165] sdb: Mode Sense: 23 00 00 00
[ 13.640167] sdb: assuming drive cache: write through
[ 13.652166] SCSI device sdb: 2007040 512-byte hdwr sectors (1028 MB)
[ 13.655158] sdb: Write Protect is off
[ 13.655162] sdb: Mode Sense: 23 00 00 00
[ 13.655164] sdb: assuming drive cache: write through
[ 13.655169] sdb: sdb1
[ 13.661226] sd 2:0:0:0: Attached scsi removable disk sdb
[ 13.661298] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 24.544982] hda: dma_timer_expiry: dma status == 0x61
[ 34.535616] hda: DMA timeout error
[ 34.535626] hda: dma timeout error: status=0x58 { DriveReady SeekComplete DataRequest }
[ 34.535633] ide: failed opcode was: unknown
[ 34.550624] hda1 hda2 <<4>hda: dma_timer_expiry: dma status == 0x61
[ 64.523506] hda: DMA timeout error
[ 64.523514] hda: dma timeout error: status=0x58 { DriveReady SeekComplete DataRequest }
[ 64.523519] ide: failed opcode was: unknown
[ 64.567994] hda5 >
[ 64.570530] hdb: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(66)
[ 64.570544] Uniform CD-ROM driver Revision: 3.20
[ 84.584696] hda: dma_timer_expiry: dma status == 0x61
[ 94.575330] hda: DMA timeout error
[ 94.575338] hda: dma timeout error: status=0x58 { DriveReady SeekComplete DataRequest }
[ 94.575343] ide: failed opcode was: unknown
[ 114.604555] hda: dma_timer_expiry: dma status == 0x61
[ 124.595189] hda: DMA timeout error
[ 124.595198] hda: dma timeout error: status=0x58 { DriveReady SeekComplete DataRequest }
[ 124.595203] ide: failed opcode was: unknown
[ 124.982589] Attempting manual resume
[ 124.982594] swsusp: Resume From Partition 3:5
[ 124.982596] PM: Checking swsusp image.
[ 125.010136] PM: Resume from disk failed.
[ 125.051675] kjournald starting. Commit interval 5 seconds
[ 125.051687] EXT3-fs: mounted filesystem with ordered data mode.
[ 150.296395] eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
[ 151.280673] NET: Registered protocol family 10
[ 151.280813] lo: Disabled Privacy Extensions
[ 152.547134] Linux agpgart interface v0.102 (c) Dave Jones
[ 152.561540] agpgart: Detected VIA VT3314 chipset
[ 152.569174] agpgart: AGP aperture is 128M @ 0xe0000000
[ 153.007612] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 153.025620] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 153.261164] input: PC Speaker as /class/input/input3
[ 153.414708] parport: PnPBIOS parport detected.
[ 153.414759] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 153.488447] drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 5 if 0 alt 1 proto 2 vid 0x03F0 pid 0x1204
[ 153.488469] usbcore: registered new interface driver usblp
[ 153.488474] drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
[ 153.590688] Linux video capture interface: v2.00
[ 153.821416] ubuntu/media/gspcav1/gspca_core.c: USB SPCA5XX camera found. SONIX JPEG (sn9c1xx)
[ 153.822832] usbcore: registered new interface driver gspca
[ 153.822838] ubuntu/media/gspcav1/gspca_core.c: gspca driver 01.00.12 registered
[ 154.012149] ACPI: PCI Interrupt Link [ALKC] BIOS reported IRQ 0, using IRQ 22
[ 154.012158] ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 22
[ 154.012168] ACPI: PCI Interrupt 0000:00:11.5[C] -> Link [ALKC] -> GSI 22 (level, low) -> IRQ 19
[ 154.012330] PCI: Setting latency timer of device 0000:00:11.5 to 64
[ 154.666216] lp0: using parport0 (interrupt-driven).
[ 154.707079] fuse init (API version 7.8)
[ 154.743308] EXT3 FS on hda1, internal journal
[ 157.252774] input: Power Button (FF) as /class/input/input4
[ 157.252812] ACPI: Power Button (FF) [PWRF]
[ 157.252874] input: Power Button (CM) as /class/input/input5
[ 157.252905] ACPI: Power Button (CM) [PWRB]
[ 157.347187] Using specific hotkey driver
[ 157.392436] No dock devices found.
[ 157.440998] ibm_acpi: ec object not found
[ 157.625953] pcc_acpi: loading...
[ 161.988132] eth0: no IPv6 routers present
[ 162.776219] [drm] Initialized drm 1.1.0 20060810
[ 162.801083] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 20
[ 162.801628] [drm] Initialized radeon 1.25.0 20060524 on minor 0
[ 163.310522] ppdev: user-space parallel port driver
[ 165.337296] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
[ 165.337303] apm: disabled - APM is not SMP safe.
[ 165.682690] agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0.
[ 165.682723] agpgart: Putting AGP V3 device at 0000:00:00.0 into 4x mode
[ 165.682810] agpgart: Putting AGP V3 device at 0000:01:00.0 into 4x mode
[ 166.009577] [drm] Setting GART location based on new memory map
[ 166.009590] [drm] Loading R200 Microcode
[ 166.009631] [drm] writeback test succeeded in 1 usecs
[ 173.081342] Bluetooth: Core ver 2.11
[ 173.081423] NET: Registered protocol family 31
[ 173.081426] Bluetooth: HCI device and connection manager initialized
[ 173.081431] Bluetooth: HCI socket layer initialized
[ 173.224580] Bluetooth: L2CAP ver 2.8
[ 173.224588] Bluetooth: L2CAP socket layer initialized
[ 173.363709] Bluetooth: RFCOMM socket layer initialized
[ 173.363727] Bluetooth: RFCOMM TTY layer initialized
[ 173.363731] Bluetooth: RFCOMM ver 1.8
lspci -vvnn > lspci-vvnn.log
00:00.0 Host bridge [0600]: VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro Host Bridge [1106:0314]
Subsystem: Giga-byte Technology Unknown device [1458:5000]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Latency: 8
Region 0: Memory at e0000000 (32-bit, prefetchable) [size=128M]
Capabilities: <access denied>
00:00.1 Host bridge [0600]: VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro Host Bridge [1106:1314]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
00:00.2 Host bridge [0600]: VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro Host Bridge [1106:2314]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
00:00.3 Host bridge [0600]: VIA Technologies, Inc. PT890 Host Bridge [1106:3208]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
00:00.4 Host bridge [0600]: VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro Host Bridge [1106:4314]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
00:00.7 Host bridge [0600]: VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro Host Bridge [1106:7314]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
00:01.0 PCI bridge [0604]: VIA Technologies, Inc. VT8237 PCI Bridge [1106:b198] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000a000-0000afff
Memory behind bridge: e8000000-e9ffffff
Prefetchable memory behind bridge: d0000000-dfffffff
Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR+ <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
Capabilities: <access denied>
00:0f.0 IDE interface [0101]: VIA Technologies, Inc. VIA VT6420 SATA RAID Controller [1106:3149] (rev 80) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: Giga-byte Technology GA-7VM400AM(F) Motherboard [1458:b003]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32
Interrupt: pin B routed to IRQ 16
Region 0: I/O ports at b000 [size=8]
Region 1: I/O ports at b400 [size=4]
Region 2: I/O ports at b800 [size=8]
Region 3: I/O ports at bc00 [size=4]
Region 4: I/O ports at c000 [size=16]
Region 5: I/O ports at c400 [size=256]
Capabilities: <access denied>
00:0f.1 IDE interface [0101]: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE [1106:0571] (rev 06) (prog-if 8a [Master SecP PriP])
Subsystem: Giga-byte Technology GA-7VAX Mainboard [1458:5002]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32
Interrupt: pin A routed to IRQ 16
Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8]
Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1]
Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8]
Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [size=1]
Region 4: I/O ports at c800 [size=16]
Capabilities: <access denied>
00:10.0 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 81) (prog-if 00 [UHCI])
Subsystem: Giga-byte Technology GA-7VAX Mainboard [1458:5004]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 17
Region 4: I/O ports at cc00 [size=32]
Capabilities: <access denied>
00:10.1 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 81) (prog-if 00 [UHCI])
Subsystem: Giga-byte Technology GA-7VAX Mainboard [1458:5004]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 17
Region 4: I/O ports at d000 [size=32]
Capabilities: <access denied>
00:10.2 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 81) (prog-if 00 [UHCI])
Subsystem: Giga-byte Technology GA-7VAX Mainboard [1458:5004]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32, Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 17
Region 4: I/O ports at d400 [size=32]
Capabilities: <access denied>
00:10.3 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 81) (prog-if 00 [UHCI])
Subsystem: Giga-byte Technology GA-7VAX Mainboard [1458:5004]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32, Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 17
Region 4: I/O ports at d800 [size=32]
Capabilities: <access denied>
00:10.4 USB Controller [0c03]: VIA Technologies, Inc. USB 2.0 [1106:3104] (rev 86) (prog-if 20 [EHCI])
Subsystem: Giga-byte Technology GA-7VAX Mainboard [1458:5004]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32, Cache Line Size: 128 bytes
Interrupt: pin C routed to IRQ 17
Region 0: Memory at ea000000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
00:11.0 ISA bridge [0601]: VIA Technologies, Inc. VT8237 ISA bridge [KT600/K8T800/K8T890 South] [1106:3227]
Subsystem: Giga-byte Technology GA-7VT600 Motherboard [1458:5001]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Capabilities: <access denied>
00:11.5 Multimedia audio controller [0401]: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller [1106:3059] (rev 60)
Subsystem: Giga-byte Technology GA-7VAX Onboard Audio (Realtek ALC650) [1458:a002]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin C routed to IRQ 19
Region 0: I/O ports at dc00 [size=256]
Capabilities: <access denied>
00:12.0 Ethernet controller [0200]: VIA Technologies, Inc. VT6102 [Rhine-II] [1106:3065] (rev 78)
Subsystem: Giga-byte Technology Unknown device [1458:e000]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (750ns min, 2000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at e000 [size=256]
Region 1: Memory at ea001000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
01:00.0 VGA compatible controller [0300]: ATI Technologies Inc RV280 [Radeon 9200 SE] [1002:5964] (rev 01) (prog-if 00 [VGA])
Subsystem: C.P. Technology Co. Ltd CN-AG92E [148c:2073]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (2000ns min), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 20
Region 0: Memory at d0000000 (32-bit, prefetchable) [size=256M]
Region 1: I/O ports at a000 [size=256]
Region 2: Memory at e9000000 (32-bit, non-prefetchable) [size=64K]
[virtual] Expansion ROM at e8000000 [disabled] [size=128K]
Capabilities: <access denied>
I also attached the lastest BootChart