Bug #121409 “prism 2.5 wavelan must blacklist some kernel module...” : Bugs : linux-source-2.6.20 package : Ubuntu

Revision history for this message

bramberg (bjorn-rampost) wrote on 2007-06-20:

#1

Dependencies.txt Edit (2.8 KiB, text/plain; charset="utf-8")
ProcMaps.txt Edit (15.6 KiB, text/plain; charset="utf-8")
ProcStatus.txt Edit (669 bytes, text/plain; charset="utf-8")

Revision history for this message

p3net (admin-p3net) wrote on 2007-06-20:

#2

What type of wireless card do you have? Also, are you using Ubuntu 7.04, as there is no Ubuntu 6.16.

Changed in gnome-nettool:
assignee:	nobody → admin-p3net
status:	Unconfirmed → Needs Info

Revision history for this message

bramberg (bjorn-rampost) wrote on 2007-06-20: Re: [Bug 121409] Re: Wi-fi missing

#3

Steven Ross wrote:
> What type of wireless card do you have? Also, are you using Ubuntu 7.04,
> as there is no Ubuntu 6.16.
>
> ** Changed in: gnome-nettool (Ubuntu)
> Assignee: (unassigned) => Steven Ross
> Status: Unconfirmed => Needs Info
>
>
Sorry abut the version, it is Ubuntu 7.04 (kernel 2.6.20-16). From the
device manager the card is identified as Prism 2.5 Wavelan chipset,
Vendor: Intersil Corporation, Staus: Staus, Bus Type : PCI, Device Type:
Unknown, Capabilities: Unknown.
Under WLAN interface the following is listed: Vendor: Unknown, Device:
Unknown, Status: Status, Bus Type: PCI, Device Type: "net", "net.80211",
Capabilities: net.net.80211. This is a built in wireless car of a Sony
Vaio PCG GRT30P laptop.

vbr
Bjorn Ramberg

Revision history for this message

p3net (admin-p3net) wrote on 2007-06-20: Re: Wi-fi missing

#4

Please attach the output of dmesg, as it sounds like you may be having a hardware issue and it will help explain why the card isn't functioning.

Revision history for this message

bramberg (bjorn-rampost) wrote on 2007-06-21: Re: [Bug 121409] Re: Wi-fi missing

#5

Download full text (24.1 KiB)

Hi,
Please fin attached a file with the output from the dmesg command.

Bjorn Ramberg

Steven Ross wrote:
> Please attach the output of dmesg, as it sounds like you may be having a
> hardware issue and it will help explain why the card isn't functioning.
>
>

[ 0.000000] Linux version 2.6.20-16-generic (root@terranova) (gcc version 4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #2 SMP Thu Jun 7 20:19:32 UTC 2007 (Ubuntu 2.6.20-16.29-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] sanitize start
[ 0.000000] sanitize end
[ 0.000000] copy_e820_map() start: 0000000000000000 size: 000000000009f400 end: 000000000009f400 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 000000000009f400 size: 0000000000000c00 end: 00000000000a0000 type: 2
[ 0.000000] copy_e820_map() start: 00000000000dc000 size: 0000000000004000 end: 00000000000e0000 type: 2
[ 0.000000] copy_e820_map() start: 00000000000e4000 size: 000000000001c000 end: 0000000000100000 type: 2
[ 0.000000] copy_e820_map() start: 0000000000100000 size: 000000003fcf0000 end: 000000003fdf0000 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 000000003fdf0000 size: 000000000000b000 end: 000000003fdfb000 type: 3
[ 0.000000] copy_e820_map() start: 000000003fdfb000 size: 0000000000005000 end: 000000003fe00000 type: 4
[ 0.000000] copy_e820_map() start: 000000003fe00000 size: 0000000000200000 end: 0000000040000000 type: 2
[ 0.000000] copy_e820_map() start: 00000000fec00000 size: 0000000000010000 end: 00000000fec10000 type: 2
[ 0.000000] copy_e820_map() start: 00000000fee00000 size: 0000000000001000 end: 00000000fee01000 type: 2
[ 0.000000] copy_e820_map() start: 00000000fff80000 size: 0000000000080000 end: 0000000100000000 type: 2
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
[ 0.000000] BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000dc000 - 00000000000e0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003fdf0000 (usable)
[ 0.000000] BIOS-e820: 000000003fdf0000 - 000000003fdfb000 (ACPI data)
[ 0.000000] BIOS-e820: 000000003fdfb000 - 000000003fe00000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003fe00000 - 0000000040000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[ 0.000000] 125MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] found SMP MP-table at 000f7b20
[ 0.000000] Entering add_active_range(0, 0, 261616) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 229376
[ 0.000000] HighMem 229376 -> 261616
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 261616
[ 0.000000] On node 0 totalpages: 261616
[ 0.000000] DMA zone: 32 pages used for m...

Hi,
Please fin attached a file with the output from the dmesg command.

Bjorn Ramberg

Steven Ross wrote:
> Please attach the output of dmesg, as it sounds like you may be having a
> hardware issue and it will help explain why the card isn't functioning.
>
>

[    0.000000] Linux version 2.6.20-16-generic (root@terranova) (gcc version 4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #2 SMP Thu Jun 7 20:19:32 UTC 2007 (Ubuntu 2.6.20-16.29-generic)
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] sanitize start
[    0.000000] sanitize end
[    0.000000] copy_e820_map() start: 0000000000000000 size: 000000000009f400 end: 000000000009f400 type: 1
[    0.000000] copy_e820_map() type is E820_RAM
[    0.000000] copy_e820_map() start: 000000000009f400 size: 0000000000000c00 end: 00000000000a0000 type: 2
[    0.000000] copy_e820_map() start: 00000000000dc000 size: 0000000000004000 end: 00000000000e0000 type: 2
[    0.000000] copy_e820_map() start: 00000000000e4000 size: 000000000001c000 end: 0000000000100000 type: 2
[    0.000000] copy_e820_map() start: 0000000000100000 size: 000000003fcf0000 end: 000000003fdf0000 type: 1
[    0.000000] copy_e820_map() type is E820_RAM
[    0.000000] copy_e820_map() start: 000000003fdf0000 size: 000000000000b000 end: 000000003fdfb000 type: 3
[    0.000000] copy_e820_map() start: 000000003fdfb000 size: 0000000000005000 end: 000000003fe00000 type: 4
[    0.000000] copy_e820_map() start: 000000003fe00000 size: 0000000000200000 end: 0000000040000000 type: 2
[    0.000000] copy_e820_map() start: 00000000fec00000 size: 0000000000010000 end: 00000000fec10000 type: 2
[    0.000000] copy_e820_map() start: 00000000fee00000 size: 0000000000001000 end: 00000000fee01000 type: 2
[    0.000000] copy_e820_map() start: 00000000fff80000 size: 0000000000080000 end: 0000000100000000 type: 2
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
[    0.000000]  BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000dc000 - 00000000000e0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000003fdf0000 (usable)
[    0.000000]  BIOS-e820: 000000003fdf0000 - 000000003fdfb000 (ACPI data)
[    0.000000]  BIOS-e820: 000000003fdfb000 - 000000003fe00000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000003fe00000 - 0000000040000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[    0.000000] 125MB HIGHMEM available.
[    0.000000] 896MB LOWMEM available.
[    0.000000] found SMP MP-table at 000f7b20
[    0.000000] Entering add_active_range(0, 0, 261616) 0 entries of 256 used
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA             0 ->     4096
[    0.000000]   Normal       4096 ->   229376
[    0.000000]   HighMem    229376 ->   261616
[    0.000000] early_node_map[1] active PFN ranges
[    0.000000]     0:        0 ->   261616
[    0.000000] On node 0 totalpages: 261616
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 4064 pages, LIFO batch:0
[    0.000000]   Normal zone: 1760 pages used for memmap
[    0.000000]   Normal zone: 223520 pages, LIFO batch:31
[    0.000000]   HighMem zone: 251 pages used for memmap
[    0.000000]   HighMem zone: 31989 pages, LIFO batch:7
[    0.000000] DMI present.
[    0.000000] ACPI: RSDP (v000 SONY                                  ) @ 0x000f7af0
[    0.000000] ACPI: RSDT (v001   SONY       F0 0x20030512 PTL  0x00000000) @ 0x3fdf6ebf
[    0.000000] ACPI: FADT (v001   SONY       F0 0x20030512 PTL  0x01000000) @ 0x3fdfaf3c
[    0.000000] ACPI: MADT (v001   SONY       F0 0x20030512 PTL  0x00000000) @ 0x3fdfafb0
[    0.000000] ACPI: DSDT (v001   SONY       F0 0x20030512 PTL  0x0100000e) @ 0x00000000
[    0.000000] ACPI: PM-Timer IO Port: 0x8008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] Processor #0 15:2 APIC version 20
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 16 low level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000)
[    0.000000] Detected 2806.527 MHz processor.
[   12.849600] Built 1 zonelists.  Total pages: 259573
[   12.849605] Kernel command line: root=UUID=6a669df8-dcb0-431e-bfef-c57c932c0c23 ro quiet splash
[   12.849766] mapped APIC to ffffd000 (fee00000)
[   12.849768] mapped IOAPIC to ffffc000 (fec00000)
[   12.849772] Enabling fast FPU save and restore... done.
[   12.849775] Enabling unmasked SIMD FPU exception support... done.
[   12.849786] Initializing CPU#0
[   12.849879] PID hash table entries: 4096 (order: 12, 16384 bytes)
[   12.851262] Console: colour VGA+ 80x25
[   12.852106] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[   12.852906] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[   12.879785] Memory: 1026264k/1046464k available (1992k kernel code, 19460k reserved, 900k data, 328k init, 128960k highmem)
[   12.879797] virtual kernel memory layout:
[   12.879798]     fixmap  : 0xfff4e000 - 0xfffff000   ( 708 kB)
[   12.879799]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[   12.879800]     vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
[   12.879801]     lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
[   12.879802]       .init : 0xc03d9000 - 0xc042b000   ( 328 kB)
[   12.879803]       .data : 0xc02f2374 - 0xc03d36d4   ( 900 kB)
[   12.879804]       .text : 0xc0100000 - 0xc02f2374   (1992 kB)
[   12.879807] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[   12.957628] Calibrating delay using timer specific routine.. 5616.85 BogoMIPS (lpj=11233714)
[   12.957686] Security Framework v1.0.0 initialized
[   12.957699] SELinux:  Disabled at boot.
[   12.957719] Mount-cache hash table entries: 512
[   12.957933] CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000
[   12.957946] CPU: Trace cache: 12K uops, L1 D cache: 8K
[   12.957949] CPU: L2 cache: 512K
[   12.957951] CPU: Hyper-Threading is disabled
[   12.957954] CPU: After all inits, caps: bfebfbff 00000000 00000000 00003080 00004400 00000000 00000000
[   12.957969] Compat vDSO mapped to ffffe000.
[   12.957974] Remapping vsyscall page to ffffe000
[   12.957990] Checking 'hlt' instruction... OK.
[   12.973757] SMP alternatives: switching to UP code
[   12.974104] Freeing SMP alternatives: 11k freed
[   12.974334] Early unpacking initramfs... done
[   13.248710] ACPI: Core revision 20060707
[   13.250605] ACPI: Looking for DSDT in initramfs... file /DSDT.aml not found, using machine DSDT.
[   13.256164] CPU0: Intel(R) Pentium(R) 4 CPU 2.80GHz stepping 07
[   13.256207] Total of 1 processors activated (5616.85 BogoMIPS).
[   13.256309] ENABLING IO-APIC IRQs
[   13.256494] ..TIMER: vector=0x31 apic1=0 pin1=16 apic2=-1 pin2=-1
[   13.296116] ..MP-BIOS bug: 8254 timer not connected to IO-APIC
[   13.296162] ...trying to set up timer (IRQ0) through the 8259A ...  failed.
[   13.296166] ...trying to set up timer as Virtual Wire IRQ... works.
[   13.440529] Brought up 1 CPUs
[   13.440789] Booting paravirtualized kernel on bare hardware
[   13.440872] Time: 15:19:05  Date: 05/21/107
[   13.440904] NET: Registered protocol family 16
[   13.441021] EISA bus registered
[   13.441026] ACPI: bus type pci registered
[   13.447589] PCI: PCI BIOS revision 2.10 entry at 0xfd996, last bus=1
[   13.447591] PCI: Using configuration type 1
[   13.447593] Setting up standard PCI resources
[   13.460748] ACPI: Interpreter enabled
[   13.460752] ACPI: Using IOAPIC for interrupt routing
[   13.461174] ACPI: PCI Root Bridge [PCI0] (0000:00)
[   13.461181] PCI: Probing PCI hardware (bus 00)
[   13.461572] Enabling SiS 96x SMBus.
[   13.462709] Boot video device is 0000:01:00.0
[   13.462912] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[   13.474499] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 *10 11)
[   13.474727] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 11) *0, disabled.
[   13.474925] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 11) *0, disabled.
[   13.475121] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11)
[   13.475339] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 *9 10 11)
[   13.475533] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 *11)
[   13.475732] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 11) *0, disabled.
[   13.475929] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 11) *0, disabled.
[   13.476010] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
[   13.503609] Linux Plug and Play Support v0.97 (c) Adam Belay
[   13.503625] pnp: PnP ACPI init
[   13.542485] pnp: PnP ACPI: found 11 devices
[   13.542491] PnPBIOS: Disabled by ACPI PNP
[   13.542551] PCI: Using ACPI for IRQ routing
[   13.542555] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[   13.548214] NET: Registered protocol family 8
[   13.548216] NET: Registered protocol family 20
[   13.548339] pnp: 00:04: ioport range 0x8000-0x808f could not be reserved
[   13.548342] pnp: 00:04: ioport range 0x8090-0x80ff has been reserved
[   13.548345] pnp: 00:04: ioport range 0x8100-0x811f has been reserved
[   13.548347] pnp: 00:04: ioport range 0x4d0-0x4d1 has been reserved
[   13.548350] pnp: 00:04: ioport range 0xfe00-0xfe00 has been reserved
[   13.548691] PCI: Failed to allocate mem resource #6:20000@f0000000 for 0000:01:00.0
[   13.548741] PCI: Bridge: 0000:00:01.0
[   13.548742]   IO window: disabled.
[   13.548751]   MEM window: d5000000-d5ffffff
[   13.548757]   PREFETCH window: e0000000-efffffff
[   13.548766] PCI: Bus 2, cardbus bridge: 0000:00:0a.0
[   13.548768]   IO window: 00002400-000024ff
[   13.548774]   IO window: 00002800-000028ff
[   13.548780]   PREFETCH window: 50000000-53ffffff
[   13.548786]   MEM window: 54000000-57ffffff
[   13.548793] PCI: Bus 6, cardbus bridge: 0000:00:0a.1
[   13.548795]   IO window: 00002c00-00002cff
[   13.548801]   IO window: 00003000-000030ff
[   13.548807]   PREFETCH window: 58000000-5bffffff
[   13.548813]   MEM window: 5c000000-5fffffff
[   13.548847] PCI: Enabling device 0000:00:0a.0 (0000 -> 0003)
[   13.548860] ACPI: PCI Interrupt 0000:00:0a.0[A] -> GSI 17 (level, low) -> IRQ 16
[   13.548885] PCI: Enabling device 0000:00:0a.1 (0000 -> 0003)
[   13.548889] ACPI: PCI Interrupt 0000:00:0a.1[A] -> GSI 17 (level, low) -> IRQ 16
[   13.548926] NET: Registered protocol family 2
[   13.588232] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[   13.588474] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[   13.589528] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[   13.590443] TCP: Hash tables configured (established 131072 bind 65536)
[   13.590450] TCP reno registered
[   13.600331] checking if image is initramfs... it is
[   14.148780] Freeing initrd memory: 6771k freed
[   14.149331] audit: initializing netlink socket (disabled)
[   14.149352] audit(1182439145.324:1): initialized
[   14.149452] highmem bounce pool size: 64 pages
[   14.149523] VFS: Disk quotas dquot_6.5.1
[   14.149548] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[   14.149612] io scheduler noop registered
[   14.149615] io scheduler anticipatory registered
[   14.149617] io scheduler deadline registered
[   14.149626] io scheduler cfq registered (default)
[   14.149939] isapnp: Scanning for PnP cards...
[   14.502880] isapnp: No Plug & Play device found
[   14.532863] Real Time Clock Driver v1.12ac
[   14.532921] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[   14.533046] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[   14.534036] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[   14.534318] PCI: Enabling device 0000:00:02.6 (0000 -> 0001)
[   14.534334] ACPI: PCI Interrupt 0000:00:02.6[C] -> GSI 18 (level, low) -> IRQ 17
[   14.534342] ACPI: PCI interrupt for device 0000:00:02.6 disabled
[   14.534425] mice: PS/2 mouse device common for all mice
[   14.535017] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[   14.535313] input: Macintosh mouse button emulation as /class/input/input0
[   14.535352] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[   14.535356] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[   14.535632] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUE] at 0x60,0x64 irq 1,12
[   14.538767] serio: i8042 KBD port at 0x60,0x64 irq 1
[   14.538775] serio: i8042 AUX port at 0x60,0x64 irq 12
[   14.538976] EISA: Probing bus 0 at eisa.0
[   14.538985] Cannot allocate resource for EISA slot 1
[   14.538987] Cannot allocate resource for EISA slot 2
[   14.538990] Cannot allocate resource for EISA slot 3
[   14.539005] Cannot allocate resource for EISA slot 8
[   14.539007] EISA: Detected 0 cards.
[   14.569047] TCP cubic registered
[   14.569054] NET: Registered protocol family 1
[   14.569083] Using IPI No-Shortcut mode
[   14.569161] ACPI: (supports S0 S3 S4 S5)
[   14.569202]   Magic number: 11:439:336
[   14.569238]   hash matches device ttyzb
[   14.569398]   hash matches device tty57
[   14.569803] Time: tsc clocksource has been installed.
[   14.569852] Freeing unused kernel memory: 328k freed
[   14.582714] input: AT Translated Set 2 keyboard as /class/input/input1
[   15.823833] Capability LSM initialized
[   15.868682] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C2])
[    2.864000] ACPI: Thermal Zone [ATF0] (42 C)
[    2.872000] Time: acpi_pm clocksource has been installed.
[    3.560000] SIS5513: IDE controller at PCI slot 0000:00:02.5
[    3.560000] SIS5513: chipset revision 0
[    3.560000] SIS5513: not 100% native mode: will probe irqs later
[    3.560000] SIS5513: SiS 962/963 MuTIOL IDE UDMA133 controller
[    3.560000]     ide0: BM-DMA at 0x1000-0x1007, BIOS settings: hda:DMA, hdb:pio
[    3.560000]     ide1: BM-DMA at 0x1008-0x100f, BIOS settings: hdc:DMA, hdd:pio
[    3.560000] Probing IDE interface ide0...
[    3.596000] usbcore: registered new interface driver usbfs
[    3.596000] usbcore: registered new interface driver hub
[    3.596000] usbcore: registered new device driver usb
[    3.596000] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[    3.664000] ieee1394: Initialized config rom entry `ip1394'
[    3.708000] sis900.c: v1.08.10 Apr. 2 2006
[    3.896000] hda: WDC WD800VE-00HDT0, ATA DISK drive
[    4.232000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[    4.516000] Probing IDE interface ide1...
[    5.252000] hdc: SONY DVD RW DW-U50A, ATAPI CD/DVD-ROM drive
[    5.588000] ide1 at 0x170-0x177,0x376 on irq 15
[    5.600000] SCSI subsystem initialized
[    5.608000] libata version 2.20 loaded.
[    5.616000] ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 20 (level, low) -> IRQ 18
[    5.616000] ohci_hcd 0000:00:03.0: OHCI Host Controller
[    5.616000] ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 1
[    5.616000] ohci_hcd 0000:00:03.0: irq 18, io mem 0xd4000000
[    5.628000] hda: max request size: 128KiB
[    5.628000] hda: 156301488 sectors (80026 MB) w/8192KiB Cache, CHS=65535/16/63, UDMA(100)
[    5.640000] hda: cache flushes supported
[    5.640000]  hda:<6>usb usb1: configuration #1 chosen from 1 choice
[    5.676000] hub 1-0:1.0: USB hub found
[    5.676000] hub 1-0:1.0: 2 ports detected
[    5.780000] ACPI: PCI Interrupt 0000:00:03.1[B] -> GSI 21 (level, low) -> IRQ 19
[    5.780000] ohci_hcd 0000:00:03.1: OHCI Host Controller
[    5.780000] ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 2
[    5.780000] ohci_hcd 0000:00:03.1: irq 19, io mem 0xd4001000
[    5.840000] usb usb2: configuration #1 chosen from 1 choice
[    5.840000] hub 2-0:1.0: USB hub found
[    5.840000] hub 2-0:1.0: 2 ports detected
[    5.932000]  hda1 hda2 hda3 hda4
[    5.944000] PCI: Enabling device 0000:00:03.2 (0010 -> 0012)
[    5.944000] ACPI: PCI Interrupt 0000:00:03.2[C] -> GSI 22 (level, low) -> IRQ 20
[    5.944000] ohci_hcd 0000:00:03.2: OHCI Host Controller
[    5.944000] ohci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 3
[    5.944000] ohci_hcd 0000:00:03.2: irq 20, io mem 0xd4002000
[    5.980000] hdc: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 8192kB Cache, UDMA(33)
[    5.980000] Uniform CD-ROM driver Revision: 3.20
[    6.004000] usb usb3: configuration #1 chosen from 1 choice
[    6.004000] hub 3-0:1.0: USB hub found
[    6.004000] hub 3-0:1.0: 2 ports detected
[    6.084000] usb 1-1: new low speed USB device using ohci_hcd and address 2
[    6.108000] PCI: Enabling device 0000:00:03.3 (0000 -> 0002)
[    6.108000] ACPI: PCI Interrupt 0000:00:03.3[D] -> GSI 23 (level, low) -> IRQ 21
[    6.108000] ehci_hcd 0000:00:03.3: EHCI Host Controller
[    6.108000] ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 4
[    6.108000] PCI: cache line size of 128 is not supported by device 0000:00:03.3
[    6.108000] ehci_hcd 0000:00:03.3: irq 21, io mem 0xd4003000
[    6.108000] ehci_hcd 0000:00:03.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[    6.108000] usb usb4: configuration #1 chosen from 1 choice
[    6.108000] hub 4-0:1.0: USB hub found
[    6.108000] hub 4-0:1.0: 6 ports detected
[    6.212000] ACPI: PCI Interrupt 0000:00:0a.2[A] -> GSI 17 (level, low) -> IRQ 16
[    6.264000] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[16]  MMIO=[d4005000-d40057ff]  Max Packet=[2048]  IR/IT contexts=[4/4]
[    6.272000] ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 19 (level, low) -> IRQ 22
[    6.272000] 0000:00:04.0: Realtek RTL8201 PHY transceiver found at address 1.
[    6.284000] 0000:00:04.0: Using transceiver found at address 1 as default
[    6.284000] eth0: SiS 900 PCI Fast Ethernet at 0x2000, IRQ 22, 08:00:46:b4:51:52.
[    6.392000] Attempting manual resume
[    6.392000] swsusp: Resume From Partition 3:3
[    6.392000] PM: Checking swsusp image.
[    6.392000] PM: Resume from disk failed.
[    6.444000] kjournald starting.  Commit interval 5 seconds
[    6.444000] EXT3-fs: mounted filesystem with ordered data mode.
[    7.124000] usb 1-1: new low speed USB device using ohci_hcd and address 3
[    7.328000] usb 1-1: configuration #1 chosen from 1 choice
[    7.544000] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[080046030178cf57]
[    7.632000] usb 3-2: new full speed USB device using ohci_hcd and address 2
[    7.844000] usb 3-2: configuration #1 chosen from 1 choice
[   16.820000] NET: Registered protocol family 10
[   16.820000] lo: Disabled Privacy Extensions
[   18.504000] eth0: Media Link On 100mbps full-duplex 
[   18.548000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   18.552000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   18.556000] Linux agpgart interface v0.102 (c) Dave Jones
[   18.728000] agpgart: Detected SiS 648 chipset
[   18.732000] agpgart: AGP aperture is 64M @ 0xd0000000
[   18.928000] prism2pci_init: prism2_pci.o: 0.2.5 Loaded
[   18.928000] PCI: Enabling device 0000:00:07.0 (0014 -> 0016)
[   18.928000] ACPI: PCI Interrupt 0000:00:07.0[A] -> GSI 18 (level, low) -> IRQ 17
[   18.928000] A Prism2.5 PCI device found, phymem:0xd4006000, irq:17, mem:0xf8a2e000
[   19.944000] input: PS/2 Mouse as /class/input/input2
[   19.964000] input: AlpsPS/2 ALPS GlidePoint as /class/input/input3
[   19.992000] Yenta: CardBus bridge found at 0000:00:0a.0 [104d:814e]
[   20.008000] input: PC Speaker as /class/input/input4
[   20.120000] Yenta: ISA IRQ mask 0x04b8, PCI irq 16
[   20.120000] Socket status: 30000006
[   20.120000] Yenta: CardBus bridge found at 0000:00:0a.1 [104d:814e]
[   20.120000] parport: PnPBIOS parport detected.
[   20.120000] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[   20.248000] Yenta: ISA IRQ mask 0x0438, PCI irq 16
[   20.248000] Socket status: 30000006
[   20.248000] sis96x_smbus 0000:00:02.1: SiS96x SMBus base address: 0x8100
[   20.328000] ieee80211_crypt: registered algorithm 'NULL'
[   20.496000] ACPI: PCI Interrupt 0000:00:02.7[C] -> GSI 18 (level, low) -> IRQ 17
[   20.552000] hostap_pci: 0.4.4-kernel (Jouni Malinen <jkmaline@cc.hut.fi>)
[   20.728000] usbcore: registered new interface driver libusual
[   20.728000] usbcore: registered new interface driver hiddev
[   20.768000] Initializing USB Mass Storage driver...
[   20.864000] input: HID 062a:0000 as /class/input/input5
[   20.864000] input: USB HID v1.10 Mouse [HID 062a:0000] on usb-0000:00:03.0-1
[   20.868000] scsi0 : SCSI emulation for USB Mass Storage devices
[   20.868000] usbcore: registered new interface driver usb-storage
[   20.868000] USB Mass Storage support registered.
[   20.868000] usbcore: registered new interface driver usbhid
[   20.868000] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[   20.868000] usb-storage: device found at 2
[   20.868000] usb-storage: waiting for device to settle before scanning
[   21.316000] intel8x0_measure_ac97_clock: measured 4293453933 usecs
[   21.316000] intel8x0: measured clock 0 rejected
[   21.316000] intel8x0: clocking to 48000
[   21.556000] orinoco 0.15 (David Gibson <hermes@gibson.dropbear.id.au>, Pavel Roskin <proski@gnu.org>, et al)
[   21.556000] orinoco_pci 0.15 (Pavel Roskin <proski@gnu.org>, David Gibson <hermes@gibson.dropbear.id.au> & Jean Tourrilhes <jt@hpl.hp.com>)
[   21.588000] cs: IO port probe 0x100-0x3af: clean.
[   21.592000] cs: IO port probe 0x3e0-0x4ff: excluding 0x480-0x48f
[   21.592000] cs: IO port probe 0x820-0x8ff: clean.
[   21.592000] cs: IO port probe 0xc00-0xcf7: clean.
[   21.592000] cs: IO port probe 0xa00-0xaff: clean.
[   21.592000] cs: IO port probe 0x100-0x3af: clean.
[   21.596000] cs: IO port probe 0x3e0-0x4ff: excluding 0x480-0x48f
[   21.596000] cs: IO port probe 0x820-0x8ff: clean.
[   21.596000] cs: IO port probe 0xc00-0xcf7: clean.
[   21.596000] cs: IO port probe 0xa00-0xaff: clean.
[   21.748000] fuse init (API version 7.8)
[   21.776000] lp0: using parport0 (interrupt-driven).
[   21.844000] Adding 2097136k swap on /dev/disk/by-uuid/b86ac0e5-92d4-42f5-8254-68447b147a04.  Priority:-1 extents:1 across:2097136k
[   22.076000] EXT3 FS on hda2, internal journal
[   23.044000] NTFS driver 2.1.28 [Flags: R/O MODULE].
[   23.108000] NTFS volume version 3.1.
[   24.836000] NET: Registered protocol family 17
[   25.868000] usb-storage: device scan complete
[   25.872000] scsi 0:0:0:0: Direct-Access     Sony     MSC-U03          2.00 PQ: 0 ANSI: 0 CCS
[   26.208000] sd 0:0:0:0: Attached scsi removable disk sda
[   26.216000] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   27.004000] eth0: no IPv6 routers present
[   28.080000] ACPI: Video Device [VID0] (multi-head: yes  rom: no  post: no)
[   28.096000] ACPI: Battery Slot [BAT1] (battery present)
[   28.100000] ACPI: Battery Slot [BAT2] (battery absent)
[   28.132000] ACPI: AC Adapter [ACAD] (on-line)
[   28.188000] input: Lid Switch as /class/input/input6
[   28.192000] ACPI: Lid Switch [LID]
[   28.224000] input: Power Button (CM) as /class/input/input7
[   28.224000] ACPI: Power Button (CM) [PWRB]
[   28.244000] No dock devices found.
[   28.260000] Using specific hotkey driver
[   28.292000] ibm_acpi: ec object not found
[   28.380000] pcc_acpi: loading...
[   28.412000] ACPI Sony Notebook Control Driver v0.2 successfully installed
[   33.892000] ppdev: user-space parallel port driver
[   34.664000] apm: BIOS not found.
[   34.728000] sonypi: Sony Programmable I/O Controller Driver v1.26.
[   34.852000] Bluetooth: Core ver 2.11
[   34.852000] NET: Registered protocol family 31
[   34.852000] Bluetooth: HCI device and connection manager initialized
[   34.852000] Bluetooth: HCI socket layer initialized
[   34.892000] Bluetooth: L2CAP ver 2.8
[   34.892000] Bluetooth: L2CAP socket layer initialized
[   34.980000] Bluetooth: RFCOMM socket layer initialized
[   34.980000] Bluetooth: RFCOMM TTY layer initialized
[   34.980000] Bluetooth: RFCOMM ver 1.8

Revision history for this message

p3net (admin-p3net) wrote on 2007-06-21: Re: Wi-fi missing

#6

As per [ 18.928000] A Prism2.5 PCI device found, phymem:0xd4006000, irq:17, mem:0xf8a2e000, it looks like your wireless card is being detected. Please go ahead and follow the directions here <https://wiki.ubuntu.com/DebuggingHardwareDetection> so that we can gather the appropriate logfiles to confirm the bug.

Revision history for this message

bramberg (bjorn-rampost) wrote on 2007-06-22: Re: [Bug 121409] Re: Wi-fi missing

#7

Download full text (41.8 KiB)

Please find attached the required logfiles.

Bjorn Ramberg

p3net wrote:
> As per [ 18.928000] A Prism2.5 PCI device found, phymem:0xd4006000,
> irq:17, mem:0xf8a2e000, it looks like your wireless card is being
> detected. Please go ahead and follow the directions here
> <https://wiki.ubuntu.com/DebuggingHardwareDetection> so that we can
> gather the appropriate logfiles to confirm the bug.
>
>

[ 0.000000] Linux version 2.6.20-16-generic (root@terranova) (gcc version 4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #2 SMP Thu Jun 7 20:19:32 UTC 2007 (Ubuntu 2.6.20-16.29-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] sanitize start
[ 0.000000] sanitize end
[ 0.000000] copy_e820_map() start: 0000000000000000 size: 000000000009f400 end: 000000000009f400 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 000000000009f400 size: 0000000000000c00 end: 00000000000a0000 type: 2
[ 0.000000] copy_e820_map() start: 00000000000dc000 size: 0000000000004000 end: 00000000000e0000 type: 2
[ 0.000000] copy_e820_map() start: 00000000000e4000 size: 000000000001c000 end: 0000000000100000 type: 2
[ 0.000000] copy_e820_map() start: 0000000000100000 size: 000000003fcf0000 end: 000000003fdf0000 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 000000003fdf0000 size: 000000000000b000 end: 000000003fdfb000 type: 3
[ 0.000000] copy_e820_map() start: 000000003fdfb000 size: 0000000000005000 end: 000000003fe00000 type: 4
[ 0.000000] copy_e820_map() start: 000000003fe00000 size: 0000000000200000 end: 0000000040000000 type: 2
[ 0.000000] copy_e820_map() start: 00000000fec00000 size: 0000000000010000 end: 00000000fec10000 type: 2
[ 0.000000] copy_e820_map() start: 00000000fee00000 size: 0000000000001000 end: 00000000fee01000 type: 2
[ 0.000000] copy_e820_map() start: 00000000fff80000 size: 0000000000080000 end: 0000000100000000 type: 2
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
[ 0.000000] BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000dc000 - 00000000000e0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003fdf0000 (usable)
[ 0.000000] BIOS-e820: 000000003fdf0000 - 000000003fdfb000 (ACPI data)
[ 0.000000] BIOS-e820: 000000003fdfb000 - 000000003fe00000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003fe00000 - 0000000040000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[ 0.000000] 125MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] found SMP MP-table at 000f7b20
[ 0.000000] Entering add_active_range(0, 0, 261616) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 229376
[ 0.000000] HighMem 229376 -> 261616
[ 0.000000] early_node_map[1] active PFN rang...

Please find attached the required logfiles.

Bjorn Ramberg

p3net wrote:
> As per [ 18.928000] A Prism2.5 PCI device found, phymem:0xd4006000,
> irq:17, mem:0xf8a2e000, it looks like your wireless card is being
> detected. Please go ahead and follow the directions here
> <https://wiki.ubuntu.com/DebuggingHardwareDetection> so that we can
> gather the appropriate logfiles to confirm the bug.
>
>

[    0.000000] Linux version 2.6.20-16-generic (root@terranova) (gcc version 4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #2 SMP Thu Jun 7 20:19:32 UTC 2007 (Ubuntu 2.6.20-16.29-generic)
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] sanitize start
[    0.000000] sanitize end
[    0.000000] copy_e820_map() start: 0000000000000000 size: 000000000009f400 end: 000000000009f400 type: 1
[    0.000000] copy_e820_map() type is E820_RAM
[    0.000000] copy_e820_map() start: 000000000009f400 size: 0000000000000c00 end: 00000000000a0000 type: 2
[    0.000000] copy_e820_map() start: 00000000000dc000 size: 0000000000004000 end: 00000000000e0000 type: 2
[    0.000000] copy_e820_map() start: 00000000000e4000 size: 000000000001c000 end: 0000000000100000 type: 2
[    0.000000] copy_e820_map() start: 0000000000100000 size: 000000003fcf0000 end: 000000003fdf0000 type: 1
[    0.000000] copy_e820_map() type is E820_RAM
[    0.000000] copy_e820_map() start: 000000003fdf0000 size: 000000000000b000 end: 000000003fdfb000 type: 3
[    0.000000] copy_e820_map() start: 000000003fdfb000 size: 0000000000005000 end: 000000003fe00000 type: 4
[    0.000000] copy_e820_map() start: 000000003fe00000 size: 0000000000200000 end: 0000000040000000 type: 2
[    0.000000] copy_e820_map() start: 00000000fec00000 size: 0000000000010000 end: 00000000fec10000 type: 2
[    0.000000] copy_e820_map() start: 00000000fee00000 size: 0000000000001000 end: 00000000fee01000 type: 2
[    0.000000] copy_e820_map() start: 00000000fff80000 size: 0000000000080000 end: 0000000100000000 type: 2
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
[    0.000000]  BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000dc000 - 00000000000e0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000003fdf0000 (usable)
[    0.000000]  BIOS-e820: 000000003fdf0000 - 000000003fdfb000 (ACPI data)
[    0.000000]  BIOS-e820: 000000003fdfb000 - 000000003fe00000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000003fe00000 - 0000000040000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[    0.000000] 125MB HIGHMEM available.
[    0.000000] 896MB LOWMEM available.
[    0.000000] found SMP MP-table at 000f7b20
[    0.000000] Entering add_active_range(0, 0, 261616) 0 entries of 256 used
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA             0 ->     4096
[    0.000000]   Normal       4096 ->   229376
[    0.000000]   HighMem    229376 ->   261616
[    0.000000] early_node_map[1] active PFN ranges
[    0.000000]     0:        0 ->   261616
[    0.000000] On node 0 totalpages: 261616
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 4064 pages, LIFO batch:0
[    0.000000]   Normal zone: 1760 pages used for memmap
[    0.000000]   Normal zone: 223520 pages, LIFO batch:31
[    0.000000]   HighMem zone: 251 pages used for memmap
[    0.000000]   HighMem zone: 31989 pages, LIFO batch:7
[    0.000000] DMI present.
[    0.000000] ACPI: RSDP (v000 SONY                                  ) @ 0x000f7af0
[    0.000000] ACPI: RSDT (v001   SONY       F0 0x20030512 PTL  0x00000000) @ 0x3fdf6ebf
[    0.000000] ACPI: FADT (v001   SONY       F0 0x20030512 PTL  0x01000000) @ 0x3fdfaf3c
[    0.000000] ACPI: MADT (v001   SONY       F0 0x20030512 PTL  0x00000000) @ 0x3fdfafb0
[    0.000000] ACPI: DSDT (v001   SONY       F0 0x20030512 PTL  0x0100000e) @ 0x00000000
[    0.000000] ACPI: PM-Timer IO Port: 0x8008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] Processor #0 15:2 APIC version 20
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 16 low level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000)
[    0.000000] Detected 2806.494 MHz processor.
[   19.627307] Built 1 zonelists.  Total pages: 259573
[   19.627314] Kernel command line: root=UUID=6a669df8-dcb0-431e-bfef-c57c932c0c23 ro quiet splash
[   19.627473] mapped APIC to ffffd000 (fee00000)
[   19.627475] mapped IOAPIC to ffffc000 (fec00000)
[   19.627479] Enabling fast FPU save and restore... done.
[   19.627483] Enabling unmasked SIMD FPU exception support... done.
[   19.627494] Initializing CPU#0
[   19.627587] PID hash table entries: 4096 (order: 12, 16384 bytes)
[   19.628969] Console: colour VGA+ 80x25
[   19.629814] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[   19.630617] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[   19.658052] Memory: 1026264k/1046464k available (1992k kernel code, 19460k reserved, 900k data, 328k init, 128960k highmem)
[   19.658064] virtual kernel memory layout:
[   19.658065]     fixmap  : 0xfff4e000 - 0xfffff000   ( 708 kB)
[   19.658066]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[   19.658067]     vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
[   19.658068]     lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
[   19.658069]       .init : 0xc03d9000 - 0xc042b000   ( 328 kB)
[   19.658070]       .data : 0xc02f2374 - 0xc03d36d4   ( 900 kB)
[   19.658071]       .text : 0xc0100000 - 0xc02f2374   (1992 kB)
[   19.658074] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[   19.735336] Calibrating delay using timer specific routine.. 5616.86 BogoMIPS (lpj=11233720)
[   19.735392] Security Framework v1.0.0 initialized
[   19.735406] SELinux:  Disabled at boot.
[   19.735425] Mount-cache hash table entries: 512
[   19.735639] CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000
[   19.735652] CPU: Trace cache: 12K uops, L1 D cache: 8K
[   19.735655] CPU: L2 cache: 512K
[   19.735657] CPU: Hyper-Threading is disabled
[   19.735660] CPU: After all inits, caps: bfebfbff 00000000 00000000 00003080 00004400 00000000 00000000
[   19.735674] Compat vDSO mapped to ffffe000.
[   19.735679] Remapping vsyscall page to ffffe000
[   19.735695] Checking 'hlt' instruction... OK.
[   19.751463] SMP alternatives: switching to UP code
[   19.751810] Freeing SMP alternatives: 11k freed
[   19.752042] Early unpacking initramfs... done
[   20.026515] ACPI: Core revision 20060707
[   20.028407] ACPI: Looking for DSDT in initramfs... file /DSDT.aml not found, using machine DSDT.
[   20.034033] CPU0: Intel(R) Pentium(R) 4 CPU 2.80GHz stepping 07
[   20.034077] Total of 1 processors activated (5616.86 BogoMIPS).
[   20.034179] ENABLING IO-APIC IRQs
[   20.034365] ..TIMER: vector=0x31 apic1=0 pin1=16 apic2=-1 pin2=-1
[   20.073987] ..MP-BIOS bug: 8254 timer not connected to IO-APIC
[   20.074033] ...trying to set up timer (IRQ0) through the 8259A ...  failed.
[   20.074036] ...trying to set up timer as Virtual Wire IRQ... works.
[   20.218236] Brought up 1 CPUs
[   20.218494] Booting paravirtualized kernel on bare hardware
[   20.218578] Time: 12:37:31  Date: 05/22/107
[   20.218610] NET: Registered protocol family 16
[   20.218726] EISA bus registered
[   20.218732] ACPI: bus type pci registered
[   20.225303] PCI: PCI BIOS revision 2.10 entry at 0xfd996, last bus=1
[   20.225305] PCI: Using configuration type 1
[   20.225307] Setting up standard PCI resources
[   20.238465] ACPI: Interpreter enabled
[   20.238469] ACPI: Using IOAPIC for interrupt routing
[   20.238895] ACPI: PCI Root Bridge [PCI0] (0000:00)
[   20.238902] PCI: Probing PCI hardware (bus 00)
[   20.239296] Enabling SiS 96x SMBus.
[   20.240432] Boot video device is 0000:01:00.0
[   20.240634] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[   20.252251] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 *10 11)
[   20.252475] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 11) *0, disabled.
[   20.252673] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 11) *0, disabled.
[   20.252868] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11)
[   20.253083] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 *9 10 11)
[   20.253277] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 *11)
[   20.253475] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 11) *0, disabled.
[   20.253672] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 11) *0, disabled.
[   20.253752] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
[   20.281355] Linux Plug and Play Support v0.97 (c) Adam Belay
[   20.281370] pnp: PnP ACPI init
[   20.320213] pnp: PnP ACPI: found 11 devices
[   20.320219] PnPBIOS: Disabled by ACPI PNP
[   20.320279] PCI: Using ACPI for IRQ routing
[   20.320283] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[   20.325948] NET: Registered protocol family 8
[   20.325950] NET: Registered protocol family 20
[   20.326063] pnp: 00:04: ioport range 0x8000-0x808f could not be reserved
[   20.326066] pnp: 00:04: ioport range 0x8090-0x80ff has been reserved
[   20.326069] pnp: 00:04: ioport range 0x8100-0x811f has been reserved
[   20.326071] pnp: 00:04: ioport range 0x4d0-0x4d1 has been reserved
[   20.326074] pnp: 00:04: ioport range 0xfe00-0xfe00 has been reserved
[   20.326417] PCI: Failed to allocate mem resource #6:20000@f0000000 for 0000:01:00.0
[   20.326468] PCI: Bridge: 0000:00:01.0
[   20.326469]   IO window: disabled.
[   20.326477]   MEM window: d5000000-d5ffffff
[   20.326484]   PREFETCH window: e0000000-efffffff
[   20.326493] PCI: Bus 2, cardbus bridge: 0000:00:0a.0
[   20.326495]   IO window: 00002400-000024ff
[   20.326501]   IO window: 00002800-000028ff
[   20.326507]   PREFETCH window: 50000000-53ffffff
[   20.326513]   MEM window: 54000000-57ffffff
[   20.326520] PCI: Bus 6, cardbus bridge: 0000:00:0a.1
[   20.326522]   IO window: 00002c00-00002cff
[   20.326528]   IO window: 00003000-000030ff
[   20.326534]   PREFETCH window: 58000000-5bffffff
[   20.326540]   MEM window: 5c000000-5fffffff
[   20.326574] PCI: Enabling device 0000:00:0a.0 (0000 -> 0003)
[   20.326587] ACPI: PCI Interrupt 0000:00:0a.0[A] -> GSI 17 (level, low) -> IRQ 16
[   20.326611] PCI: Enabling device 0000:00:0a.1 (0000 -> 0003)
[   20.326615] ACPI: PCI Interrupt 0000:00:0a.1[A] -> GSI 17 (level, low) -> IRQ 16
[   20.326653] NET: Registered protocol family 2
[   20.365931] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[   20.366170] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[   20.367223] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[   20.368142] TCP: Hash tables configured (established 131072 bind 65536)
[   20.368149] TCP reno registered
[   20.378027] checking if image is initramfs... it is
[   20.925378] Freeing initrd memory: 6771k freed
[   20.925929] audit: initializing netlink socket (disabled)
[   20.925950] audit(1182515851.324:1): initialized
[   20.926051] highmem bounce pool size: 64 pages
[   20.926119] VFS: Disk quotas dquot_6.5.1
[   20.926143] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[   20.926208] io scheduler noop registered
[   20.926211] io scheduler anticipatory registered
[   20.926214] io scheduler deadline registered
[   20.926222] io scheduler cfq registered (default)
[   20.926531] isapnp: Scanning for PnP cards...
[   21.279468] isapnp: No Plug & Play device found
[   21.309117] Real Time Clock Driver v1.12ac
[   21.309177] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[   21.309302] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[   21.310258] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[   21.310526] PCI: Enabling device 0000:00:02.6 (0000 -> 0001)
[   21.310542] ACPI: PCI Interrupt 0000:00:02.6[C] -> GSI 18 (level, low) -> IRQ 17
[   21.310550] ACPI: PCI interrupt for device 0000:00:02.6 disabled
[   21.310635] mice: PS/2 mouse device common for all mice
[   21.311251] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[   21.311547] input: Macintosh mouse button emulation as /class/input/input0
[   21.311644] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[   21.311649] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[   21.311927] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUE] at 0x60,0x64 irq 1,12
[   21.315085] serio: i8042 KBD port at 0x60,0x64 irq 1
[   21.315093] serio: i8042 AUX port at 0x60,0x64 irq 12
[   21.315302] EISA: Probing bus 0 at eisa.0
[   21.315312] Cannot allocate resource for EISA slot 1
[   21.315314] Cannot allocate resource for EISA slot 2
[   21.315316] Cannot allocate resource for EISA slot 3
[   21.315331] Cannot allocate resource for EISA slot 8
[   21.315333] EISA: Detected 0 cards.
[   21.345374] TCP cubic registered
[   21.345383] NET: Registered protocol family 1
[   21.345412] Using IPI No-Shortcut mode
[   21.345490] ACPI: (supports S0 S3 S4 S5)
[   21.345531]   Magic number: 11:505:633
[   21.345643]   hash matches device ptycc
[   21.346166] Freeing unused kernel memory: 328k freed
[   21.347512] Time: tsc clocksource has been installed.
[   21.359120] input: AT Translated Set 2 keyboard as /class/input/input1
[   22.597058] Capability LSM initialized
[   22.641778] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C2])
[    2.860000] ACPI: Thermal Zone [ATF0] (42 C)
[    2.868000] Time: acpi_pm clocksource has been installed.
[    3.488000] usbcore: registered new interface driver usbfs
[    3.488000] usbcore: registered new interface driver hub
[    3.488000] usbcore: registered new device driver usb
[    3.488000] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[    3.488000] ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 20 (level, low) -> IRQ 18
[    3.488000] ohci_hcd 0000:00:03.0: OHCI Host Controller
[    3.488000] ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 1
[    3.488000] ohci_hcd 0000:00:03.0: irq 18, io mem 0xd4000000
[    3.520000] sis900.c: v1.08.10 Apr. 2 2006
[    3.572000] ieee1394: Initialized config rom entry `ip1394'
[    3.576000] usb usb1: configuration #1 chosen from 1 choice
[    3.576000] hub 1-0:1.0: USB hub found
[    3.576000] hub 1-0:1.0: 2 ports detected
[    3.684000] ACPI: PCI Interrupt 0000:00:03.1[B] -> GSI 21 (level, low) -> IRQ 19
[    3.684000] ohci_hcd 0000:00:03.1: OHCI Host Controller
[    3.684000] ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 2
[    3.684000] ohci_hcd 0000:00:03.1: irq 19, io mem 0xd4001000
[    3.748000] usb usb2: configuration #1 chosen from 1 choice
[    3.748000] hub 2-0:1.0: USB hub found
[    3.748000] hub 2-0:1.0: 2 ports detected
[    3.856000] PCI: Enabling device 0000:00:03.2 (0010 -> 0012)
[    3.856000] ACPI: PCI Interrupt 0000:00:03.2[C] -> GSI 22 (level, low) -> IRQ 20
[    3.856000] ohci_hcd 0000:00:03.2: OHCI Host Controller
[    3.856000] ohci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 3
[    3.856000] ohci_hcd 0000:00:03.2: irq 20, io mem 0xd4002000
[    3.920000] usb usb3: configuration #1 chosen from 1 choice
[    3.920000] hub 3-0:1.0: USB hub found
[    3.920000] hub 3-0:1.0: 2 ports detected
[    3.988000] usb 1-1: new low speed USB device using ohci_hcd and address 2
[    4.028000] ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 19 (level, low) -> IRQ 21
[    4.028000] 0000:00:04.0: Realtek RTL8201 PHY transceiver found at address 1.
[    4.036000] 0000:00:04.0: Using transceiver found at address 1 as default
[    4.040000] eth0: SiS 900 PCI Fast Ethernet at 0x2000, IRQ 21, 08:00:46:b4:51:52.
[    4.040000] SIS5513: IDE controller at PCI slot 0000:00:02.5
[    4.040000] SIS5513: chipset revision 0
[    4.040000] SIS5513: not 100% native mode: will probe irqs later
[    4.040000] SIS5513: SiS 962/963 MuTIOL IDE UDMA133 controller
[    4.040000]     ide0: BM-DMA at 0x1000-0x1007, BIOS settings: hda:DMA, hdb:pio
[    4.040000]     ide1: BM-DMA at 0x1008-0x100f, BIOS settings: hdc:DMA, hdd:pio
[    4.040000] Probing IDE interface ide0...
[    4.192000] usb 1-1: configuration #1 chosen from 1 choice
[    4.332000] hda: WDC WD800VE-00HDT0, ATA DISK drive
[    4.500000] usb 3-2: new full speed USB device using ohci_hcd and address 2
[    4.672000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[    4.708000] usb 3-2: configuration #1 chosen from 1 choice
[    4.712000] usbcore: registered new interface driver hiddev
[    4.716000] input: HID 062a:0000 as /class/input/input2
[    4.716000] input: USB HID v1.10 Mouse [HID 062a:0000] on usb-0000:00:03.0-1
[    4.716000] usbcore: registered new interface driver usbhid
[    4.716000] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[    4.724000] usbcore: registered new interface driver libusual
[    4.732000] SCSI subsystem initialized
[    4.732000] Initializing USB Mass Storage driver...
[    4.732000] scsi0 : SCSI emulation for USB Mass Storage devices
[    4.732000] usbcore: registered new interface driver usb-storage
[    4.732000] USB Mass Storage support registered.
[    4.732000] usb-storage: device found at 2
[    4.732000] usb-storage: waiting for device to settle before scanning
[    4.952000] Probing IDE interface ide1...
[    5.692000] hdc: SONY DVD RW DW-U50A, ATAPI CD/DVD-ROM drive
[    6.032000] ide1 at 0x170-0x177,0x376 on irq 15
[    6.044000] libata version 2.20 loaded.
[    6.048000] ACPI: PCI Interrupt 0000:00:0a.2[A] -> GSI 17 (level, low) -> IRQ 16
[    6.104000] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[16]  MMIO=[d4005000-d40057ff]  Max Packet=[2048]  IR/IT contexts=[4/4]
[    6.112000] PCI: Enabling device 0000:00:03.3 (0000 -> 0002)
[    6.112000] ACPI: PCI Interrupt 0000:00:03.3[D] -> GSI 23 (level, low) -> IRQ 22
[    6.112000] ehci_hcd 0000:00:03.3: EHCI Host Controller
[    6.112000] ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 4
[    6.112000] PCI: cache line size of 128 is not supported by device 0000:00:03.3
[    6.112000] ehci_hcd 0000:00:03.3: irq 22, io mem 0xd4003000
[    6.112000] ehci_hcd 0000:00:03.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[    6.112000] usb 3-2: USB disconnect, address 2
[    6.112000] usb usb4: configuration #1 chosen from 1 choice
[    6.112000] hub 4-0:1.0: USB hub found
[    6.112000] hub 4-0:1.0: 6 ports detected
[    6.120000] hda: max request size: 128KiB
[    6.120000] hda: 156301488 sectors (80026 MB) w/8192KiB Cache, CHS=65535/16/63, UDMA(100)
[    6.128000] hda: cache flushes supported
[    6.128000]  hda:<6>usb 1-1: USB disconnect, address 2
[    6.420000]  hda1 hda2 hda3 hda4
[    6.464000] hdc: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 8192kB Cache, UDMA(33)
[    6.464000] Uniform CD-ROM driver Revision: 3.20
[    6.852000] Attempting manual resume
[    6.852000] swsusp: Resume From Partition 3:3
[    6.852000] PM: Checking swsusp image.
[    6.852000] PM: Resume from disk failed.
[    6.896000] kjournald starting.  Commit interval 5 seconds
[    6.896000] EXT3-fs: mounted filesystem with ordered data mode.
[    7.044000] usb 1-1: new low speed USB device using ohci_hcd and address 3
[    7.240000] usb 1-1: configuration #1 chosen from 1 choice
[    7.252000] input: HID 062a:0000 as /class/input/input3
[    7.252000] input: USB HID v1.10 Mouse [HID 062a:0000] on usb-0000:00:03.0-1
[    7.392000] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[080046030178cf57]
[    7.556000] usb 3-2: new full speed USB device using ohci_hcd and address 3
[    7.764000] usb 3-2: configuration #1 chosen from 1 choice
[    7.764000] scsi1 : SCSI emulation for USB Mass Storage devices
[    7.764000] usb-storage: device found at 3
[    7.764000] usb-storage: waiting for device to settle before scanning
[   12.764000] usb-storage: device scan complete
[   12.772000] scsi 1:0:0:0: Direct-Access     Sony     MSC-U03          2.00 PQ: 0 ANSI: 0 CCS
[   17.348000] NET: Registered protocol family 10
[   17.348000] lo: Disabled Privacy Extensions
[   19.044000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   19.048000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   19.052000] Linux agpgart interface v0.102 (c) Dave Jones
[   19.068000] agpgart: Detected SiS 648 chipset
[   19.072000] eth0: Media Link On 100mbps full-duplex 
[   19.072000] agpgart: AGP aperture is 64M @ 0xd0000000
[   19.124000] sis96x_smbus 0000:00:02.1: SiS96x SMBus base address: 0x8100
[   19.272000] Yenta: CardBus bridge found at 0000:00:0a.0 [104d:814e]
[   19.416000] Yenta: ISA IRQ mask 0x04b8, PCI irq 16
[   19.416000] Socket status: 30000006
[   19.416000] Yenta: CardBus bridge found at 0000:00:0a.1 [104d:814e]
[   19.548000] Yenta: ISA IRQ mask 0x04b8, PCI irq 16
[   19.548000] Socket status: 30000006
[   19.588000] prism2pci_init: prism2_pci.o: 0.2.5 Loaded
[   19.588000] PCI: Enabling device 0000:00:07.0 (0014 -> 0016)
[   19.588000] ACPI: PCI Interrupt 0000:00:07.0[A] -> GSI 18 (level, low) -> IRQ 17
[   19.588000] A Prism2.5 PCI device found, phymem:0xd4006000, irq:17, mem:0xf8ad2000
[   20.528000] input: PS/2 Mouse as /class/input/input4
[   20.548000] input: AlpsPS/2 ALPS GlidePoint as /class/input/input5
[   20.756000] input: PC Speaker as /class/input/input6
[   20.876000] parport: PnPBIOS parport detected.
[   20.876000] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[   20.908000] ieee80211_crypt: registered algorithm 'NULL'
[   20.940000] hostap_pci: 0.4.4-kernel (Jouni Malinen <jkmaline@cc.hut.fi>)
[   20.976000] orinoco 0.15 (David Gibson <hermes@gibson.dropbear.id.au>, Pavel Roskin <proski@gnu.org>, et al)
[   20.976000] orinoco_pci 0.15 (Pavel Roskin <proski@gnu.org>, David Gibson <hermes@gibson.dropbear.id.au> & Jean Tourrilhes <jt@hpl.hp.com>)
[   21.184000] sd 1:0:0:0: Attached scsi removable disk sda
[   21.272000] sd 1:0:0:0: Attached scsi generic sg0 type 0
[   21.292000] ACPI: PCI Interrupt 0000:00:02.7[C] -> GSI 18 (level, low) -> IRQ 17
[   21.896000] cs: IO port probe 0x100-0x3af: clean.
[   21.900000] cs: IO port probe 0x3e0-0x4ff: excluding 0x480-0x48f
[   21.900000] cs: IO port probe 0x820-0x8ff: clean.
[   21.900000] cs: IO port probe 0xc00-0xcf7: clean.
[   21.900000] cs: IO port probe 0xa00-0xaff: clean.
[   21.904000] cs: IO port probe 0x100-0x3af: clean.
[   21.904000] cs: IO port probe 0x3e0-0x4ff: excluding 0x480-0x48f
[   21.904000] cs: IO port probe 0x820-0x8ff: clean.
[   21.904000] cs: IO port probe 0xc00-0xcf7: clean.
[   21.908000] cs: IO port probe 0xa00-0xaff: clean.
[   22.116000] intel8x0_measure_ac97_clock: measured 55466 usecs
[   22.116000] intel8x0: clocking to 48000
[   22.248000] fuse init (API version 7.8)
[   22.272000] lp0: using parport0 (interrupt-driven).
[   22.340000] Adding 2097136k swap on /dev/disk/by-uuid/b86ac0e5-92d4-42f5-8254-68447b147a04.  Priority:-1 extents:1 across:2097136k
[   22.572000] EXT3 FS on hda2, internal journal
[   23.520000] NTFS driver 2.1.28 [Flags: R/O MODULE].
[   23.572000] NTFS volume version 3.1.
[   25.332000] NET: Registered protocol family 17
[   28.148000] eth0: no IPv6 routers present
[   28.600000] ACPI: Video Device [VID0] (multi-head: yes  rom: no  post: no)
[   28.616000] ACPI: Battery Slot [BAT1] (battery present)
[   28.616000] ACPI: Battery Slot [BAT2] (battery absent)
[   28.648000] ACPI: AC Adapter [ACAD] (on-line)
[   28.704000] input: Lid Switch as /class/input/input7
[   28.712000] ACPI: Lid Switch [LID]
[   28.744000] input: Power Button (CM) as /class/input/input8
[   28.748000] ACPI: Power Button (CM) [PWRB]
[   28.764000] No dock devices found.
[   28.776000] Using specific hotkey driver
[   28.812000] ibm_acpi: ec object not found
[   28.896000] pcc_acpi: loading...
[   28.932000] ACPI Sony Notebook Control Driver v0.2 successfully installed
[   34.388000] ppdev: user-space parallel port driver
[   35.172000] apm: BIOS not found.
[   35.252000] sonypi: Sony Programmable I/O Controller Driver v1.26.
[   35.372000] Bluetooth: Core ver 2.11
[   35.372000] NET: Registered protocol family 31
[   35.372000] Bluetooth: HCI device and connection manager initialized
[   35.372000] Bluetooth: HCI socket layer initialized
[   35.412000] Bluetooth: L2CAP ver 2.8
[   35.412000] Bluetooth: L2CAP socket layer initialized
[   35.496000] Bluetooth: RFCOMM socket layer initialized
[   35.496000] Bluetooth: RFCOMM TTY layer initialized
[   35.496000] Bluetooth: RFCOMM ver 1.8
[   64.964000] usb 1-1: USB disconnect, address 3
[   88.412000] usb 1-1: new low speed USB device using ohci_hcd and address 4
[   88.620000] usb 1-1: configuration #1 chosen from 1 choice
[   88.632000] input: USB Mouse as /class/input/input9
[   88.632000] input: USB HID v1.10 Mouse [USB Mouse] on usb-0000:00:03.0-1

00:00.0 Host bridge: Silicon Integrated Systems [SiS] 645xx (rev 03)
	Subsystem: Sony Corporation Unknown device 814e
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
	Latency: 32
	Region 0: Memory at d0000000 (32-bit, non-prefetchable) [size=64M]
	Capabilities: <access denied>

00:01.0 PCI bridge: Silicon Integrated Systems [SiS] SG86C202 (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 99
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=86
	Memory behind bridge: d5000000-d5ffffff
	Prefetchable memory behind bridge: e0000000-efffffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-

00:02.0 ISA bridge: Silicon Integrated Systems [SiS] SiS963 [MuTIOL Media IO] (rev 14)
	Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0

00:02.1 SMBus: Silicon Integrated Systems [SiS] SiS961/2 SMBus Controller
	Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Interrupt: pin B routed to IRQ 0
	Region 4: I/O ports at 8100 [size=32]

00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] (prog-if 80 [Master])
	Subsystem: Sony Corporation Unknown device 814e
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 128
	Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [disabled] [size=8]
	Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [disabled] [size=1]
	Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [disabled] [size=8]
	Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [disabled] [size=1]
	Region 4: I/O ports at 1000 [size=16]

00:02.6 Modem: Silicon Integrated Systems [SiS] AC'97 Modem Controller (rev a0) (prog-if 00 [Generic])
	Subsystem: Sony Corporation Unknown device 814e
	Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Interrupt: pin C routed to IRQ 17
	Region 0: I/O ports at 1800 [size=256]
	Region 1: I/O ports at 1400 [size=128]
	Capabilities: <access denied>

00:02.7 Multimedia audio controller: Silicon Integrated Systems [SiS] AC'97 Sound Controller (rev a0)
	Subsystem: Sony Corporation Unknown device 814e
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 173 (13000ns min, 2750ns max)
	Interrupt: pin C routed to IRQ 17
	Region 0: I/O ports at 1c00 [size=256]
	Region 1: I/O ports at 1480 [size=128]
	Capabilities: <access denied>

00:03.0 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 0f) (prog-if 10 [OHCI])
	Subsystem: Sony Corporation Unknown device 814e
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 32 (20000ns max)
	Interrupt: pin A routed to IRQ 18
	Region 0: Memory at d4000000 (32-bit, non-prefetchable) [size=4K]

00:03.1 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 0f) (prog-if 10 [OHCI])
	Subsystem: Sony Corporation Unknown device 814e
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 32 (20000ns max)
	Interrupt: pin B routed to IRQ 19
	Region 0: Memory at d4001000 (32-bit, non-prefetchable) [size=4K]

00:03.2 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 0f) (prog-if 10 [OHCI])
	Subsystem: Sony Corporation Unknown device 814e
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 32 (20000ns max)
	Interrupt: pin C routed to IRQ 20
	Region 0: Memory at d4002000 (32-bit, non-prefetchable) [size=4K]

00:03.3 USB Controller: Silicon Integrated Systems [SiS] USB 2.0 Controller (prog-if 20 [EHCI])
	Subsystem: Sony Corporation Unknown device 814e
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 32 (20000ns max)
	Interrupt: pin D routed to IRQ 22
	Region 0: Memory at d4003000 (32-bit, non-prefetchable) [size=4K]
	Capabilities: <access denied>

00:04.0 Ethernet controller: Silicon Integrated Systems [SiS] SiS900 PCI Fast Ethernet (rev 90)
	Subsystem: Sony Corporation Unknown device 814e
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 173 (13000ns min, 2750ns max)
	Interrupt: pin A routed to IRQ 21
	Region 0: I/O ports at 2000 [size=256]
	Region 1: Memory at d4004000 (32-bit, non-prefetchable) [size=4K]
	[virtual] Expansion ROM at 60000000 [disabled] [size=128K]
	Capabilities: <access denied>

00:07.0 Network controller: Intersil Corporation Prism 2.5 Wavelan chipset (rev 01)
	Subsystem: AMBIT Microsystem Corp. LAN-Express IEEE 802.11b Wireless LAN
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 32, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 17
	Region 0: Memory at d4006000 (32-bit, prefetchable) [size=4K]
	Capabilities: <access denied>

00:0a.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev aa)
	Subsystem: Sony Corporation Unknown device 814e
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 168
	Interrupt: pin A routed to IRQ 16
	Region 0: Memory at 60020000 (32-bit, non-prefetchable) [size=4K]
	Bus: primary=00, secondary=02, subordinate=05, sec-latency=176
	Memory window 0: 50000000-53fff000 (prefetchable)
	Memory window 1: 54000000-57fff000
	I/O window 0: 00002400-000024ff
	I/O window 1: 00002800-000028ff
	BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+
	16-bit legacy interface ports at 0001

00:0a.1 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev aa)
	Subsystem: Sony Corporation Unknown device 814e
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 168
	Interrupt: pin A routed to IRQ 16
	Region 0: Memory at 60021000 (32-bit, non-prefetchable) [size=4K]
	Bus: primary=00, secondary=06, subordinate=09, sec-latency=176
	Memory window 0: 58000000-5bfff000 (prefetchable)
	Memory window 1: 5c000000-5ffff000
	I/O window 0: 00002c00-00002cff
	I/O window 1: 00003000-000030ff
	BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+
	16-bit legacy interface ports at 0001

00:0a.2 FireWire (IEEE 1394): Ricoh Co Ltd R5C552 IEEE 1394 Controller (rev 02) (prog-if 10 [OHCI])
	Subsystem: Sony Corporation Unknown device 814e
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 32 (500ns min, 1000ns max)
	Interrupt: pin A routed to IRQ 16
	Region 0: Memory at d4005000 (32-bit, non-prefetchable) [size=2K]
	Capabilities: <access denied>

01:00.0 VGA compatible controller: nVidia Corporation NV31M [GeForce FX Go5600] (rev a1) (prog-if 00 [VGA])
	Subsystem: Sony Corporation Unknown device 814f
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 40 (1250ns min, 250ns max)
	Interrupt: pin A routed to IRQ 10
	Region 0: Memory at d5000000 (32-bit, non-prefetchable) [size=16M]
	Region 1: Memory at e0000000 (32-bit, prefetchable) [size=256M]
	Capabilities: <access denied>

00:00.0 0600: 1039:0648 (rev 03)
	Subsystem: 104d:814e
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
	Latency: 32
	Region 0: Memory at d0000000 (32-bit, non-prefetchable) [size=64M]
	Capabilities: <access denied>

00:01.0 0604: 1039:0002 (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 99
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=86
	Memory behind bridge: d5000000-d5ffffff
	Prefetchable memory behind bridge: e0000000-efffffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-

00:02.0 0601: 1039:0963 (rev 14)
	Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0

00:02.1 0c05: 1039:0016
	Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Interrupt: pin B routed to IRQ 0
	Region 4: I/O ports at 8100 [size=32]

00:02.5 0101: 1039:5513 (prog-if 80 [Master])
	Subsystem: 104d:814e
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 128
	Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [disabled] [size=8]
	Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [disabled] [size=1]
	Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [disabled] [size=8]
	Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [disabled] [size=1]
	Region 4: I/O ports at 1000 [size=16]

00:02.6 0703: 1039:7013 (rev a0) (prog-if 00 [Generic])
	Subsystem: 104d:814e
	Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Interrupt: pin C routed to IRQ 17
	Region 0: I/O ports at 1800 [size=256]
	Region 1: I/O ports at 1400 [size=128]
	Capabilities: <access denied>

00:02.7 0401: 1039:7012 (rev a0)
	Subsystem: 104d:814e
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 173 (13000ns min, 2750ns max)
	Interrupt: pin C routed to IRQ 17
	Region 0: I/O ports at 1c00 [size=256]
	Region 1: I/O ports at 1480 [size=128]
	Capabilities: <access denied>

00:03.0 0c03: 1039:7001 (rev 0f) (prog-if 10 [OHCI])
	Subsystem: 104d:814e
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 32 (20000ns max)
	Interrupt: pin A routed to IRQ 18
	Region 0: Memory at d4000000 (32-bit, non-prefetchable) [size=4K]

00:03.1 0c03: 1039:7001 (rev 0f) (prog-if 10 [OHCI])
	Subsystem: 104d:814e
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 32 (20000ns max)
	Interrupt: pin B routed to IRQ 19
	Region 0: Memory at d4001000 (32-bit, non-prefetchable) [size=4K]

00:03.2 0c03: 1039:7001 (rev 0f) (prog-if 10 [OHCI])
	Subsystem: 104d:814e
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 32 (20000ns max)
	Interrupt: pin C routed to IRQ 20
	Region 0: Memory at d4002000 (32-bit, non-prefetchable) [size=4K]

00:03.3 0c03: 1039:7002 (prog-if 20 [EHCI])
	Subsystem: 104d:814e
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 32 (20000ns max)
	Interrupt: pin D routed to IRQ 22
	Region 0: Memory at d4003000 (32-bit, non-prefetchable) [size=4K]
	Capabilities: <access denied>

00:04.0 0200: 1039:0900 (rev 90)
	Subsystem: 104d:814e
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 173 (13000ns min, 2750ns max)
	Interrupt: pin A routed to IRQ 21
	Region 0: I/O ports at 2000 [size=256]
	Region 1: Memory at d4004000 (32-bit, non-prefetchable) [size=4K]
	[virtual] Expansion ROM at 60000000 [disabled] [size=128K]
	Capabilities: <access denied>

00:07.0 0280: 1260:3872 (rev 01)
	Subsystem: 1468:0202
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 32, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 17
	Region 0: Memory at d4006000 (32-bit, prefetchable) [size=4K]
	Capabilities: <access denied>

00:0a.0 0607: 1180:0476 (rev aa)
	Subsystem: 104d:814e
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 168
	Interrupt: pin A routed to IRQ 16
	Region 0: Memory at 60020000 (32-bit, non-prefetchable) [size=4K]
	Bus: primary=00, secondary=02, subordinate=05, sec-latency=176
	Memory window 0: 50000000-53fff000 (prefetchable)
	Memory window 1: 54000000-57fff000
	I/O window 0: 00002400-000024ff
	I/O window 1: 00002800-000028ff
	BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+
	16-bit legacy interface ports at 0001

00:0a.1 0607: 1180:0476 (rev aa)
	Subsystem: 104d:814e
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 168
	Interrupt: pin A routed to IRQ 16
	Region 0: Memory at 60021000 (32-bit, non-prefetchable) [size=4K]
	Bus: primary=00, secondary=06, subordinate=09, sec-latency=176
	Memory window 0: 58000000-5bfff000 (prefetchable)
	Memory window 1: 5c000000-5ffff000
	I/O window 0: 00002c00-00002cff
	I/O window 1: 00003000-000030ff
	BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+
	16-bit legacy interface ports at 0001

00:0a.2 0c00: 1180:0552 (rev 02) (prog-if 10 [OHCI])
	Subsystem: 104d:814e
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 32 (500ns min, 1000ns max)
	Interrupt: pin A routed to IRQ 16
	Region 0: Memory at d4005000 (32-bit, non-prefetchable) [size=2K]
	Capabilities: <access denied>

01:00.0 0300: 10de:031a (rev a1) (prog-if 00 [VGA])
	Subsystem: 104d:814f
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 40 (1250ns min, 250ns max)
	Interrupt: pin A routed to IRQ 10
	Region 0: Memory at d5000000 (32-bit, non-prefetchable) [size=16M]
	Region 1: Memory at e0000000 (32-bit, prefetchable) [size=256M]
	Capabilities: <access denied>

Linux version 2.6.20-16-generic (root@terranova) (gcc version 4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #2 SMP Thu Jun 7 20:19:32 UTC 2007

Ubuntu 2.6.20-16.29-generic

Linux bjorn-laptop 2.6.20-16-generic #2 SMP Thu Jun 7 20:19:32 UTC 2007 i686 GNU/Linux

Revision history for this message

p3net (admin-p3net) wrote on 2007-06-22: Re: Wi-fi missing

#8

OK, you now have enough logfiles to let the maintainer take a look at it and decide what to do. I'm going to go ahead and mark this and confirmed.

Changed in gnome-nettool:
assignee:	admin-p3net → nobody
status:	Incomplete → Confirmed

Revision history for this message

bramberg (bjorn-rampost) wrote on 2007-06-25: Re: [Bug 121409] Re: Wi-fi missing

#9

Any update on this trouble ticket?
Bjorn Ramberg

p3net wrote:
> OK, you now have enough logfiles to let the maintainer take a look at it
> and decide what to do. I'm going to go ahead and mark this and
> confirmed.
>
> ** Changed in: gnome-nettool (Ubuntu)
> Assignee: p3net => (unassigned)
> Status: Incomplete => Confirmed
>
>

Revision history for this message

bramberg (bjorn-rampost) wrote on 2007-06-30:

#10

This is now solved after applying the solution found at
http://ubuntuforums.org/showthread.php?p=2301863

Sebastien Bacher (seb128) on 2007-08-16

Changed in gnome-nettool:
status:	Confirmed → New

Brian Murray (brian-murray) on 2007-12-03

description:

updated

Revision history for this message

Launchpad Janitor (janitor) wrote on 2008-08-11: This bug is now reported against the 'linux' package

#11

Beginning with the Hardy Heron 8.04 development cycle, all open Ubuntu kernel bugs need to be reported against the "linux" kernel package. We are automatically migrating this bug to the new "linux" package. However, development has already began for the upcoming Intrepid Ibex 8.10 release. It would be helpful if you could test the upcoming release and verify if this is still an issue - http://www.ubuntu.com/testing . If the issue still exists, please update this report by changing the Status of the "linux" task from "Incomplete" to "New". We appreciate your patience and understanding as we make this transition. Thanks!

Revision history for this message

Leann Ogasawara (leannogasawara) wrote on 2008-08-29:

#12

The Ubuntu Kernel Team is planning to move to the 2.6.27 kernel for the upcoming Intrepid Ibex 8.10 release. As a result, the kernel team would appreciate it if you could please test this newer 2.6.27 Ubuntu kernel. There are one of two ways you should be able to test:

1) If you are comfortable installing packages on your own, the linux-image-2.6.27-* package is currently available for you to install and test.

--or--

2) The upcoming Alpha5 for Intrepid Ibex 8.10 will contain this newer 2.6.27 Ubuntu kernel. Alpha5 is set to be released Thursday Sept 4. Please watch http://www.ubuntu.com/testing for Alpha5 to be announced. You should then be able to test via a LiveCD.

Please let us know immediately if this newer 2.6.27 kernel resolves the bug reported here or if the issue remains. More importantly, please open a new bug report for each new bug/regression introduced by the 2.6.27 kernel and tag the bug report with 'linux-2.6.27'. Also, please specifically note if the issue does or does not appear in the 2.6.26 kernel. Thanks again, we really appreicate your help and feedback.

Revision history for this message

Launchpad Janitor (janitor) wrote on 2008-12-23: Kernel team bugs

#13

Per a decision made by the Ubuntu Kernel Team, bugs will longer be assigned to the ubuntu-kernel-team in Launchpad as part of the bug triage process. The ubuntu-kernel-team is being unassigned from this bug report. Refer to https://wiki.ubuntu.com/KernelTeamBugPolicies for more information. Thanks.

Revision history for this message

Amit Kucheria (amitk) wrote on 2009-05-12:

#14

This bug report is being closed because we received no response to the previous inquiry for information. Please reopen if this is still an issue in the current Ubuntu release, Jaunty Jackalope 9.04 - http://www.ubuntu.com/getubuntu/download. To reopen the bug, click on the current status under the Status column and change the status back to "New". Thanks.

Changed in linux (Ubuntu):
status:	Incomplete → Won't Fix

Affects		Status	Importance	Assigned to	Milestone
	linux (Ubuntu)	Won't Fix	Undecided	Unassigned
	linux-source-2.6.20 (Ubuntu)	Won't Fix	Medium	Unassigned

Ubuntu
linux-source-2.6.20 package

prism 2.5 wavelan must blacklist some kernel modules

Bug Description

Other bug subscribers

Bug attachments

Remote bug watches

Ubuntulinux-source-2.6.20 package

prism 2.5 wavelan must blacklist some kernel modules

Bug Description

Other bug subscribers

Bug attachments

Remote bug watches

Ubuntu
linux-source-2.6.20 package