2.6.20-16 kernel suddenly crashing with TPPS/2

Ubuntu kernel ran fine for a while but suddenly when booting up crashes in both regular and recovery mode on the most current kernel for Feisty (2.6.20-16) but the exact same thing happens on the previous kernel revision (2.6.20-15). It boots fine until it gets to the TPPS/2 driver and there is no activity from the system (no HD activity from my Thinkpad's indicator).
Here's the boot log:
[ 0.000000] Linux version 2.6.20-16-generic (root@terranova) (gcc version 4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #2 SMP Thu Jun 7 20:19:32 UTC 2007 (Ubuntu 2.6.20-16.29-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] sanitize start
[ 0.000000] sanitize end
[ 0.000000] copy_e820_map() start: 0000000000000000 size: 000000000009d800 end: 000000000009d800 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 000000000009d800 size: 0000000000002800 end: 00000000000a0000 type: 2
[ 0.000000] copy_e820_map() start: 00000000000d2000 size: 0000000000002000 end: 00000000000d4000 type: 2
[ 0.000000] copy_e820_map() start: 00000000000e0000 size: 0000000000020000 end: 0000000000100000 type: 2
[ 0.000000] copy_e820_map() start: 0000000000100000 size: 000000003d5b0000 end: 000000003d6b0000 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 000000003d6b0000 size: 000000000001d000 end: 000000003d6cd000 type: 3
[ 0.000000] copy_e820_map() start: 000000003d6cd000 size: 0000000000033000 end: 000000003d700000 type: 4
[ 0.000000] copy_e820_map() start: 000000003d700000 size: 0000000000900000 end: 000000003e000000 type: 2
[ 0.000000] copy_e820_map() start: 00000000f0000000 size: 0000000004000000 end: 00000000f4000000 type: 2
[ 0.000000] copy_e820_map() start: 00000000fec00000 size: 0000000000010000 end: 00000000fec10000 type: 2
[ 0.000000] copy_e820_map() start: 00000000fed00000 size: 0000000000000400 end: 00000000fed00400 type: 2
[ 0.000000] copy_e820_map() start: 00000000fed14000 size: 0000000000006000 end: 00000000fed1a000 type: 2
[ 0.000000] copy_e820_map() start: 00000000fed1c000 size: 0000000000074000 end: 00000000fed90000 type: 2
[ 0.000000] copy_e820_map() start: 00000000fee00000 size: 0000000000001000 end: 00000000fee01000 type: 2
[ 0.000000] copy_e820_map() start: 00000000ff000000 size: 0000000001000000 end: 0000000100000000 type: 2
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009d800 (usable)
[ 0.000000] BIOS-e820: 000000000009d800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003d6b0000 (usable)
[ 0.000000] BIOS-e820: 000000003d6b0000 - 000000003d6cd000 (ACPI data)
[ 0.000000] BIOS-e820: 000000003d6cd000 - 000000003d700000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003d700000 - 000000003e000000 (reserved)
[ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
[ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] 86MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] found SMP MP-table at 000f6900
[ 0.000000] Entering add_active_range(0, 0, 251568) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 229376
[ 0.000000] HighMem 229376 -> 251568
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 251568
[ 0.000000] On node 0 totalpages: 251568
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1760 pages used for memmap
[ 0.000000] Normal zone: 223520 pages, LIFO batch:31
[ 0.000000] HighMem zone: 173 pages used for memmap
[ 0.000000] HighMem zone: 22019 pages, LIFO batch:3
[ 0.000000] DMI present.
[ 0.000000] ACPI: RSDP (v002 LENOVO ) @ 0x000f68d0
[ 0.000000] ACPI: XSDT (v001 LENOVO TP-7L 0x00001070 LTP 0x00000000) @ 0x3d6bdfb8
[ 0.000000] ACPI: FADT (v003 LENOVO TP-7L 0x00001070 LNVO 0x00000001) @ 0x3d6be100
[ 0.000000] ACPI: SSDT (v001 LENOVO TP-7L 0x00001070 MSFT 0x03000000) @ 0x3d6be2b4
[ 0.000000] ACPI: ECDT (v001 LENOVO TP-7L 0x00001070 LNVO 0x00000001) @ 0x3d6ccbb5
[ 0.000000] ACPI: TCPA (v002 LENOVO TP-7L 0x00001070 LNVO 0x00000001) @ 0x3d6ccc07
[ 0.000000] ACPI: MADT (v001 LENOVO TP-7L 0x00001070 LNVO 0x00000001) @ 0x3d6ccc39
[ 0.000000] ACPI: MCFG (v001 LENOVO TP-7L 0x00001070 LNVO 0x00000001) @ 0x3d6ccca1
[ 0.000000] ACPI: HPET (v001 LENOVO TP-7L 0x00001070 LNVO 0x00000001) @ 0x3d6cccdd
[ 0.000000] ACPI: SLIC (v001 LENOVO TP-7L 0x00001070 LTP 0x00000000) @ 0x3d6ccdf0
[ 0.000000] ACPI: BOOT (v001 LENOVO TP-7L 0x00001070 LTP 0x00000001) @ 0x3d6ccf66
[ 0.000000] ACPI: ASF! (v016 LENOVO TP-7L 0x00001070 PTL 0x00000001) @ 0x3d6ccf8e
[ 0.000000] ACPI: SSDT (v001 LENOVO TP-7L 0x00001070 INTL 0x20050513) @ 0x3d6e26d9
[ 0.000000] ACPI: SSDT (v001 LENOVO TP-7L 0x00001070 INTL 0x20050513) @ 0x3d6e2938
[ 0.000000] ACPI: SSDT (v001 LENOVO TP-7L 0x00001070 INTL 0x20050513) @ 0x3d6e29de
[ 0.000000] ACPI: SSDT (v001 LENOVO TP-7L 0x00001070 INTL 0x20050513) @ 0x3d6e2ed5
[ 0.000000] ACPI: SSDT (v001 LENOVO TP-7L 0x00001070 INTL 0x20050513) @ 0x3d6e3792
[ 0.000000] ACPI: DSDT (v001 LENOVO TP-7L 0x00001070 MSFT 0x03000000) @ 0x00000000
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 6:15 APIC version 20
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] Processor #1 6:15 APIC version 20
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 40000000 (gap: 3e000000:b2000000)
[ 0.000000] Detected 1995.204 MHz processor.
[ 18.613179] Built 1 zonelists. Total pages: 249603
[ 18.613182] Kernel command line: root=UUID=2e1de66f-8069-4055-a169-bdb3fc79b1dd ro quiet splash
[ 18.613288] mapped APIC to ffffd000 (fee00000)
[ 18.613290] mapped IOAPIC to ffffc000 (fec00000)
[ 18.613292] Enabling fast FPU save and restore... done.
[ 18.613294] Enabling unmasked SIMD FPU exception support... done.
[ 18.613301] Initializing CPU#0
[ 18.613367] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 18.614814] Console: colour VGA+ 80x25
[ 18.615130] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 18.615403] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 18.632541] Memory: 986416k/1006272k available (1992k kernel code, 19180k reserved, 900k data, 328k init, 88768k highmem)
[ 18.632547] virtual kernel memory layout:
[ 18.632548] fixmap : 0xfff4e000 - 0xfffff000 ( 708 kB)
[ 18.632549] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 18.632550] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
[ 18.632551] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 18.632552] .init : 0xc03d9000 - 0xc042b000 ( 328 kB)
[ 18.632553] .data : 0xc02f2374 - 0xc03d36d4 ( 900 kB)
[ 18.632553] .text : 0xc0100000 - 0xc02f2374 (1992 kB)
[ 18.632556] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 18.632699] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 18.632703] hpet0: 3 64-bit timers, 14318180 Hz
[ 18.633709] Using HPET for base-timer
[ 18.712661] Calibrating delay using timer specific routine.. 3996.08 BogoMIPS (lpj=7992164)
[ 18.712690] Security Framework v1.0.0 initialized
[ 18.712693] SELinux: Disabled at boot.
[ 18.712704] Mount-cache hash table entries: 512
[ 18.712799] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001
[ 18.712804] monitor/mwait feature present.
[ 18.712806] using mwait in idle threads.
[ 18.712808] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 18.712810] CPU: L2 cache: 4096K
[ 18.712812] CPU: Physical Processor ID: 0
[ 18.712813] CPU: Processor Core ID: 0
[ 18.712815] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e3bd 00000000 00000001
[ 18.712822] Compat vDSO mapped to ffffe000.
[ 18.712824] Remapping vsyscall page to ffffe000
[ 18.712832] Checking 'hlt' instruction... OK.
[ 18.728719] SMP alternatives: switching to UP code
[ 18.728965] Early unpacking initramfs... done
[ 18.972603] ACPI: Core revision 20060707
[ 18.972822] ACPI: Looking for DSDT in initramfs... file /DSDT.aml not found, using machine DSDT.
[ 19.002242] CPU0: Intel(R) Core(TM)2 Duo CPU T7300 @ 2.00GHz stepping 0a
[ 19.002263] SMP alternatives: switching to SMP code
[ 19.002324] Booting processor 1/1 eip 3000
[ 19.013085] Initializing CPU#1
[ 19.092631] Calibrating delay using timer specific routine.. 3990.07 BogoMIPS (lpj=7980142)
[ 19.092636] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001
[ 19.092641] monitor/mwait feature present.
[ 19.092643] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 19.092645] CPU: L2 cache: 4096K
[ 19.092646] CPU: Physical Processor ID: 0
[ 19.092647] CPU: Processor Core ID: 1
[ 19.092649] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e3bd 00000000 00000001
[ 19.093082] CPU1: Intel(R) Core(TM)2 Duo CPU T7300 @ 2.00GHz stepping 0a
[ 19.093102] Total of 2 processors activated (7986.15 BogoMIPS).
[ 19.093285] ENABLING IO-APIC IRQs
[ 19.093493] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 19.240366] checking TSC synchronization across 2 CPUs:
[ 0.000001] CPU#0 had -91 usecs TSC skew, fixed it up.
[ 0.000003] CPU#1 had 91 usecs TSC skew, fixed it up.
[ 0.004002] Brought up 2 CPUs
[ 0.105281] migration_cost=41
[ 0.105492] Booting paravirtualized kernel on bare hardware
[ 0.105581] Time: 2:02:09 Date: 06/06/107
[ 0.105605] NET: Registered protocol family 16
[ 0.105676] EISA bus registered
[ 0.105680] ACPI: bus type pci registered
[ 0.106128] PCI: PCI BIOS revision 3.00 entry at 0xfdda7, last bus=24
[ 0.106130] PCI: Using configuration type 1
[ 0.106131] Setting up standard PCI resources
[ 0.189770] ACPI: Interpreter enabled
[ 0.189772] ACPI: Using IOAPIC for interrupt routing
[ 0.190500] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11)
[ 0.191055] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.191605] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.192158] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.192707] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.193261] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.193811] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.194360] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.194711] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.194715] PCI: Probing PCI hardware (bus 00)
[ 0.195922] Boot video device is 0000:00:02.0
[ 0.200022] PCI: Transparent bridge - 0000:00:1e.0
[ 0.200340] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.206675] ACPI: Power Resource [PUBS] (on)
[ 0.207923] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT]
[ 0.208088] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
[ 0.208250] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]
[ 0.208413] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT]
[ 0.208606] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP4._PRT]
[ 0.208798] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
[ 0.211270] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 0.211278] pnp: PnP ACPI init
[ 0.216653] pnp: PnP ACPI: found 11 devices
[ 0.216656] PnPBIOS: Disabled by ACPI PNP
[ 0.216690] PCI: Using ACPI for IRQ routing
[ 0.216692] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 0.530344] NET: Registered protocol family 8
[ 0.530346] NET: Registered protocol family 20
[ 0.531239] PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0
[ 0.531242] PCI: Bridge: 0000:00:1c.0
[ 0.531247] IO window: 2000-2fff
[ 0.531258] MEM window: fc000000-fdffffff
[ 0.531264] PREFETCH window: f8000000-f80fffff
[ 0.531272] PCI: Bridge: 0000:00:1c.1
[ 0.531277] IO window: 3000-3fff
[ 0.531289] MEM window: dc000000-df3fffff
[ 0.531298] PREFETCH window: dfe00000-dfefffff
[ 0.531306] PCI: Bridge: 0000:00:1c.2
[ 0.531310] IO window: 4000-4fff
[ 0.531320] MEM window: d8000000-d9ffffff
[ 0.531329] PREFETCH window: dfb00000-dfbfffff
[ 0.531341] PCI: Bridge: 0000:00:1c.3
[ 0.531346] IO window: 5000-5fff
[ 0.531356] MEM window: d4000000-d5ffffff
[ 0.531364] PREFETCH window: df800000-df8fffff
[ 0.531372] PCI: Bridge: 0000:00:1c.4
[ 0.531377] IO window: 6000-6fff
[ 0.531386] MEM window: d0000000-d1ffffff
[ 0.531393] PREFETCH window: df500000-df5fffff
[ 0.531405] PCI: Bus 22, cardbus bridge: 0000:15:00.0
[ 0.531407] IO window: 00007000-000070ff
[ 0.531414] IO window: 00007400-000074ff
[ 0.531424] PREFETCH window: f4000000-f7ffffff
[ 0.531431] MEM window: 40000000-43ffffff
[ 0.531438] PCI: Bridge: 0000:00:1e.0
[ 0.531443] IO window: 7000-afff
[ 0.531453] MEM window: f8300000-fbffffff
[ 0.531462] PREFETCH window: f4000000-f7ffffff
[ 0.531513] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 20 (level, low) -> IRQ 16
[ 0.531523] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 0.531572] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 21 (level, low) -> IRQ 17
[ 0.531580] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 0.531626] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 22 (level, low) -> IRQ 18
[ 0.531634] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[ 0.531678] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 23 (level, low) -> IRQ 19
[ 0.531685] PCI: Setting latency timer of device 0000:00:1c.3 to 64
[ 0.531738] ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 20 (level, low) -> IRQ 16
[ 0.531748] PCI: Setting latency timer of device 0000:00:1c.4 to 64
[ 0.531767] PCI: Enabling device 0000:00:1e.0 (0005 -> 0007)
[ 0.531780] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 0.531811] ACPI: PCI Interrupt 0000:15:00.0[A] -> GSI 16 (level, low) -> IRQ 20
[ 0.531817] PCI: Setting latency timer of device 0000:15:00.0 to 64
[ 0.531842] NET: Registered protocol family 2
[ 0.579715] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.579796] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.580161] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.580339] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.580341] TCP reno registered
[ 0.595765] checking if image is initramfs... it is
[ 1.121227] Freeing initrd memory: 6776k freed
[ 1.121381] Simple Boot Flag at 0x35 set to 0x1
[ 1.121745] audit: initializing netlink socket (disabled)
[ 1.121760] audit(1183687329.680:1): initialized
[ 1.121837] highmem bounce pool size: 64 pages
[ 1.121900] VFS: Disk quotas dquot_6.5.1
[ 1.121917] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.121961] io scheduler noop registered
[ 1.121963] io scheduler anticipatory registered
[ 1.121965] io scheduler deadline registered
[ 1.121973] io scheduler cfq registered (default)
[ 1.122303] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 1.122435] assign_interrupt_mode Found MSI capability
[ 1.122437] Allocate Port Service[0000:00:1c.0:pcie00]
[ 1.122464] Allocate Port Service[0000:00:1c.0:pcie02]
[ 1.122707] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 1.122838] assign_interrupt_mode Found MSI capability
[ 1.122840] Allocate Port Service[0000:00:1c.1:pcie00]
[ 1.122866] Allocate Port Service[0000:00:1c.1:pcie02]
[ 1.123092] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[ 1.123228] assign_interrupt_mode Found MSI capability
[ 1.123229] Allocate Port Service[0000:00:1c.2:pcie00]
[ 1.123257] Allocate Port Service[0000:00:1c.2:pcie02]
[ 1.123482] PCI: Setting latency timer of device 0000:00:1c.3 to 64
[ 1.123615] assign_interrupt_mode Found MSI capability
[ 1.123617] Allocate Port Service[0000:00:1c.3:pcie00]
[ 1.123642] Allocate Port Service[0000:00:1c.3:pcie02]
[ 1.123873] PCI: Setting latency timer of device 0000:00:1c.4 to 64
[ 1.124010] assign_interrupt_mode Found MSI capability
[ 1.124012] Allocate Port Service[0000:00:1c.4:pcie00]
[ 1.124037] Allocate Port Service[0000:00:1c.4:pcie02]
[ 1.124301] isapnp: Scanning for PnP cards...
[ 1.481962] isapnp: No Plug & Play device found
[ 1.497980] Real Time Clock Driver v1.12ac
[ 1.498027] hpet_resources: 0xfed00000 is busy
[ 1.498049] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 1.498585] mice: PS/2 mouse device common for all mice
[ 1.499016] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 1.499132] input: Macintosh mouse button emulation as /class/input/input0
[ 1.499167] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 1.499170] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 1.499434] PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[ 1.507579] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.507582] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.507656] EISA: Probing bus 0 at eisa.0
[ 1.507664] Cannot allocate resource for EISA slot 1
[ 1.507666] Cannot allocate resource for EISA slot 2
[ 1.507668] Cannot allocate resource for EISA slot 3
[ 1.507670] Cannot allocate resource for EISA slot 4
[ 1.507672] Cannot allocate resource for EISA slot 5
[ 1.507674] Cannot allocate resource for EISA slot 6
[ 1.507675] Cannot allocate resource for EISA slot 7
[ 1.507677] Cannot allocate resource for EISA slot 8
[ 1.507679] EISA: Detected 0 cards.
[ 1.523177] input: AT Translated Set 2 keyboard as /class/input/input1
[ 1.537796] TCP cubic registered
[ 1.537803] NET: Registered protocol family 1
[ 1.537821] Starting balanced_irq
[ 1.537825] Using IPI No-Shortcut mode
[ 1.537880] ACPI: (supports S0 S3 S4 S5)
[ 1.537928] Magic number: 15:624:4
[ 1.537933] hash matches device ttybf
[ 1.538144] Freeing unused kernel memory: 328k freed
[ 1.539162] Time: tsc clocksource has been installed.
[ 2.715568] Capability LSM initialized
[ 2.745099] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu0Ist] [20060707]
[ 2.745430] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu0Cst] [20060707]
[ 2.746375] Monitor-Mwait will be used to enter C-1 state
[ 2.746378] Monitor-Mwait will be used to enter C-2 state
[ 2.746380] Monitor-Mwait will be used to enter C-3 state
[ 2.746385] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 2.746389] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 2.746899] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu1Ist] [20060707]
[ 2.747153] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu1Cst] [20060707]
[ 2.748143] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[ 2.748148] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 3.124000] ACPI: Thermal Zone [THM0] (46 C)
[ 3.128000] ACPI: Thermal Zone [THM1] (45 C)
[ 3.132000] Time: hpet clocksource has been installed.
[ 3.396000] usbcore: registered new interface driver usbfs
[ 3.396000] usbcore: registered new interface driver hub
[ 3.396000] usbcore: registered new device driver usb
[ 3.396000] USB Universal Host Controller Interface driver v3.0
[ 3.396000] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 20 (level, low) -> IRQ 16
[ 3.396000] PCI: Setting latency timer of device 0000:00:1a.0 to 64
[ 3.396000] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 3.400000] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 3.400000] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001860
[ 3.400000] usb usb1: configuration #1 chosen from 1 choice
[ 3.400000] hub 1-0:1.0: USB hub found
[ 3.400000] hub 1-0:1.0: 2 ports detected
[ 3.496000] Intel(R) PRO/1000 Network Driver - version 7.3.15-k2-NAPI
[ 3.496000] Copyright (c) 1999-2006 Intel Corporation.
[ 3.500000] SCSI subsystem initialized
[ 3.504000] ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 17
[ 3.504000] PCI: Setting latency timer of device 0000:00:1a.1 to 64
[ 3.504000] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 3.504000] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
[ 3.504000] uhci_hcd 0000:00:1a.1: irq 17, io base 0x00001880
[ 3.504000] usb usb2: configuration #1 chosen from 1 choice
[ 3.504000] hub 2-0:1.0: USB hub found
[ 3.504000] hub 2-0:1.0: 2 ports detected
[ 3.504000] libata version 2.20 loaded.
[ 3.524000] ieee1394: Initialized config rom entry `ip1394'
[ 3.608000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 20
[ 3.608000] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 3.608000] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 3.608000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 3
[ 3.608000] uhci_hcd 0000:00:1d.0: irq 20, io base 0x000018a0
[ 3.608000] usb usb3: configuration #1 chosen from 1 choice
[ 3.608000] hub 3-0:1.0: USB hub found
[ 3.608000] hub 3-0:1.0: 2 ports detected
[ 3.712000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 21
[ 3.712000] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 3.712000] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 3.712000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 4
[ 3.712000] uhci_hcd 0000:00:1d.1: irq 21, io base 0x000018c0
[ 3.712000] usb usb4: configuration #1 chosen from 1 choice
[ 3.712000] hub 4-0:1.0: USB hub found
[ 3.712000] hub 4-0:1.0: 2 ports detected
[ 3.816000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 22
[ 3.816000] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 3.816000] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 3.816000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 5
[ 3.816000] uhci_hcd 0000:00:1d.2: irq 22, io base 0x000018e0
[ 3.816000] usb usb5: configuration #1 chosen from 1 choice
[ 3.816000] hub 5-0:1.0: USB hub found
[ 3.816000] hub 5-0:1.0: 2 ports detected
[ 3.920000] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 22 (level, low) -> IRQ 18
[ 3.920000] PCI: Setting latency timer of device 0000:00:1a.7 to 64
[ 3.920000] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 3.920000] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 6
[ 3.920000] ehci_hcd 0000:00:1a.7: debug port 1
[ 3.920000] PCI: cache line size of 32 is not supported by device 0000:00:1a.7
[ 3.920000] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfe226400
[ 3.924000] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 3.924000] usb usb6: configuration #1 chosen from 1 choice
[ 3.924000] hub 6-0:1.0: USB hub found
[ 3.924000] hub 6-0:1.0: 4 ports detected
[ 3.952000] usb 3-1: new full speed USB device using uhci_hcd and address 2
[ 4.028000] ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 19 (level, low) -> IRQ 23
[ 4.028000] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 4.028000] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 4.028000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 7
[ 4.028000] ehci_hcd 0000:00:1d.7: debug port 1
[ 4.028000] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[ 4.028000] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfe226800
[ 4.032000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 4.032000] usb usb7: configuration #1 chosen from 1 choice
[ 4.032000] hub 7-0:1.0: USB hub found
[ 4.032000] hub 7-0:1.0: 6 ports detected
[ 4.136000] ata_piix 0000:00:1f.2: version 2.10ac1
[ 4.136000] ata_piix 0000:00:1f.2: MAP [ IDE IDE -- -- ]
[ 4.292000] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 16 (level, low) -> IRQ 20
[ 4.292000] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 4.292000] ata1: PATA max UDMA/100 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x00011c30 irq 14
[ 4.292000] ata2: SATA max UDMA/133 cmd 0x00010170 ctl 0x00010376 bmdma 0x00011c38 irq 15
[ 4.292000] scsi0 : ata_piix
[ 4.456000] ata1.00: ata_hpa_resize 1: sectors = 234441648, hpa_sectors = 234441648
[ 4.456000] ata1.00: ATA-7: HITACHI HTS541612J9SA00, SBDIC7JP, max UDMA/100
[ 4.456000] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 4.464000] ata1.00: ata_hpa_resize 1: sectors = 234441648, hpa_sectors = 234441648
[ 4.464000] ata1.00: configured for UDMA/100
[ 4.464000] scsi1 : ata_piix
[ 4.476000] usb 3-1: device not accepting address 2, error -71
[ 4.784000] ata2.00: ATAPI, max UDMA/33
[ 4.784000] ata2.00: applying bridge limits
[ 4.948000] ata2.00: configured for UDMA/33
[ 4.948000] scsi 0:0:0:0: Direct-Access ATA HITACHI HTS54161 SBDI PQ: 0 ANSI: 5
[ 4.952000] scsi 1:0:0:0: CD-ROM HL-DT-ST RW/DVD GCC-4247N 1.02 PQ: 0 ANSI: 5
[ 4.952000] ACPI: PCI Interrupt 0000:15:00.1[B] -> GSI 17 (level, low) -> IRQ 21
[ 4.952000] PCI: Setting latency timer of device 0000:15:00.1 to 64
[ 4.952000] ACPI: PCI Interrupt 0000:00:19.0[A] -> GSI 20 (level, low) -> IRQ 16
[ 4.952000] PCI: Setting latency timer of device 0000:00:19.0 to 64
[ 4.960000] usb 3-1: new full speed USB device using uhci_hcd and address 4
[ 5.004000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[21] MMIO=[f8301000-f83017ff] Max Packet=[2048] IR/IT contexts=[4/4]
[ 5.004000] e1000: 0000:00:19.0: e1000_probe: (PCI Express:2.5Gb/s:Width x1) 00:1a:6b:36:96:39
[ 5.096000] e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
[ 5.108000] SCSI device sda: 234441648 512-byte hdwr sectors (120034 MB)
[ 5.108000] sda: Write Protect is off
[ 5.108000] sda: Mode Sense: 00 3a 00 00
[ 5.108000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.108000] SCSI device sda: 234441648 512-byte hdwr sectors (120034 MB)
[ 5.108000] sda: Write Protect is off
[ 5.108000] sda: Mode Sense: 00 3a 00 00
[ 5.108000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.108000] sda:<6>usb 3-1: configuration #1 chosen from 1 choice
[ 5.128000] hub 3-1:1.0: USB hub found
[ 5.128000] hub 3-1:1.0: 2 ports detected
[ 5.140000] sda1 sda2 sda3 sda4
[ 5.164000] sd 0:0:0:0: Attached scsi disk sda
[ 5.168000] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 5.168000] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 5.184000] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[ 5.184000] Uniform CD-ROM driver Revision: 3.20
[ 5.184000] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 5.440000] usb 3-1.2: new full speed USB device using uhci_hcd and address 5
[ 5.492000] Attempting manual resume
[ 5.492000] swsusp: Resume From Partition 8:4
[ 5.492000] PM: Checking swsusp image.
[ 5.492000] PM: Resume from disk failed.
[ 5.520000] kjournald starting. Commit interval 5 seconds
[ 5.520000] EXT3-fs: mounted filesystem with ordered data mode.
[ 5.572000] usb 3-1.2: configuration #1 chosen from 1 choice
[ 6.280000] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00061b032a107aa4]
[ 17.224000] e1000: eth0: e1000_request_irq: Unable to allocate MSI interrupt Error: -22
[ 17.228000] e1000: eth0: e1000_watchdog: NIC Link is Up 100 Mbps Full Duplex
[ 17.228000] e1000: eth0: e1000_watchdog: 10/100 speed: disabling TSO
[ 17.972000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 17.976000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 18.144000] input: PC Speaker as /class/input/input2
[ 18.188000] Linux agpgart interface v0.102 (c) Dave Jones
[ 18.196000] agpgart: Detected an Intel 965GM Chipset.
[ 18.196000] agpgart: Detected 7676K stolen memory.
[ 18.208000] agpgart: AGP aperture is 256M @ 0xe0000000
[ 18.284000] sdhci: Secure Digital Host Controller Interface driver
[ 18.284000] sdhci: Copyright(c) Pierre Ossman
[ 18.284000] sdhci: SDHCI controller found at 0000:15:00.2 [1180:0822] (rev 21)
[ 18.284000] ACPI: PCI Interrupt 0000:15:00.2[C] -> GSI 18 (level, low) -> IRQ 22
[ 18.284000] PCI: Setting latency timer of device 0000:15:00.2 to 64
[ 18.284000] mmc0: SDHCI at 0xf8301800 irq 22 DMA
[ 18.320000] Yenta: CardBus bridge found at 0000:15:00.0 [17aa:20c6]
[ 18.376000] usbcore: registered new interface driver hiddev
[ 18.448000] Yenta: ISA IRQ mask 0x0cb8, PCI irq 20
[ 18.448000] Socket status: 30000006
[ 18.448000] pcmcia: parent PCI bridge I/O window: 0x7000 - 0xafff
[ 18.448000] cs: IO port probe 0x7000-0xafff: clean.
[ 18.448000] pcmcia: parent PCI bridge Memory window: 0xf8300000 - 0xfbffffff
[ 18.448000] pcmcia: parent PCI bridge Memory window: 0xf4000000 - 0xf7ffffff
[ 18.488000] NET: Registered protocol family 17
[ 18.492000] input: Fellowes INC Fellowes Opti Mouse3 as /class/input/input3
[ 18.492000] input: USB HID v1.10 Mouse [Fellowes INC Fellowes Opti Mouse3] on usb-0000:00:1d.0-1.2
[ 18.492000] usbcore: registered new interface driver usbhid
[ 18.492000] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[ 18.796000] cs: IO port probe 0x100-0x3af: clean.
[ 18.800000] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
[ 18.800000] cs: IO port probe 0x820-0x8ff: clean.
[ 18.800000] cs: IO port probe 0xc00-0xcf7: clean.
[ 18.800000] cs: IO port probe 0xa00-0xaff: clean.
[ 18.832000] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x81a0b1, caps: 0xa04793/0x300000
[ 18.832000] serio: Synaptics pass-through port at isa0060/serio1/input0
[ 18.876000] input: SynPS/2 Synaptics TouchPad as /class/input/input4
[ 18.936000] fuse init (API version 7.8)
[ 19.012000] lp: driver loaded but no devices found
[ 19.052000] [drm] Initialized drm 1.1.0 20060810
[ 19.060000] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 20
[ 19.060000] [drm] Initialized i915 1.6.0 20060119 on minor 0
[ 19.080000] Adding 1655632k swap on /dev/disk/by-uuid/55fce1fa-f046-401a-a686-415c861ad27b. Priority:-1 extents:1 across:1655632k
[ 19.384000] EXT3 FS on sda3, internal journal
[ 19.628000] NTFS driver 2.1.28 [Flags: R/O MODULE].
[ 19.704000] NTFS volume version 3.1.
[ 19.752000] NTFS volume version 3.1.
[ 22.336000] NET: Registered protocol family 10
[ 22.336000] lo: Disabled Privacy Extensions
[ 24.132000] IBM TrackPoint firmware: 0x0e, buttons: 3/3
[ 24.404000] input: TPPS/2 IBM TrackPoint as /class/input/input5

It loads the the Trackpoint driver/firmware on my T61 but suddenly the kernel ceases all activity. (Believe me I've let the system run for 10 minutes with no change.) This is the dmesg from the mounted partition of my ubuntu install where the kernel boot is failing. I'm running a liveCD for now trying to see if any configuration changes can be done on my install partition to fix this.