Bug #146684 “Bad EIP value & kernel panic on boot” : Bugs : linux-source-2.6.22 package : Ubuntu

Revision history for this message

spirou74 (nonameatall) wrote on 2007-09-29:

#1

This bug was existing in Feisty Fawn too...

Revision history for this message

Brian Murray (brian-murray) wrote on 2007-10-03:

#2

Thank you for taking the time to report this bug and helping to make Ubuntu better. With which specific version of Ubuntu did you notice this? Was it with Gutsy? If so was it using the Beta version of Gutsy? Thanks in advance.

Changed in linux-source-2.6.22:
importance:	Undecided → Medium
status:	New → Incomplete

Revision history for this message

spirou74 (nonameatall) wrote on 2007-10-03 (last edit on 2021-11-14): Re: [Bug 146684] Re: Bad EIP value & kernel panic on boot

#3

It was under Gutsy Beta, but this bug was existing under Feisty.
I just "solved" it yesterday with theses boot options, at the live-CD boot :

pci=noacpi nobiospnp noapic nolapic

now it's working but I had an other kernel panic during the first restart,
after updating

So i'm waiting, because it's seems unstable

Ask me if you need anything (log, etc.)

thanks for you amazing work, and sorry for my bad english!

Revision history for this message

Brian Murray (brian-murray) wrote on 2007-10-03:

#4

It would be helpful if you could add the full output of 'dmesg' after a fresh boot and the output of 'sudo lscpi -vvnn' as attachments to your bug report. Additionally, is the BIOS of your system up to date? Thanks again.

Revision history for this message

spirou74 (nonameatall) wrote on 2007-10-04:

#5

Download full text (26.5 KiB)

dmesg after a fresh boot :

[ 21.134840] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 21.134841] .init : 0xc03e3000 - 0xc043e000 ( 364 kB)
[ 21.134842] .data : 0xc02f8456 - 0xc03ddea4 ( 918 kB)
[ 21.134844] .text : 0xc0100000 - 0xc02f8456 (2017 kB)
[ 21.134847] Checking if this processor honours the WP bit even in
supervisor mode... Ok.
[ 21.134884] SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4,
CPUs=2, Nodes=1
[ 21.214793] Calibrating delay using timer specific routine..
3328.96BogoMIPS (lpj=6657939)
[ 21.214819] Security Framework v1.0.0 initialized
[ 21.214826] SELinux: Disabled at boot.
[ 21.214840] Mount-cache hash table entries: 512
[ 21.214962] CPU: After generic identify, caps: bfe9fbff 00100000 00000000
00000000 0000c189 00000000 00000000
[ 21.214971] monitor/mwait feature present.
[ 21.214973] using mwait in idle threads.
[ 21.214978] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 21.214980] CPU: L2 cache: 2048K
[ 21.214983] CPU: Physical Processor ID: 0
[ 21.214985] CPU: Processor Core ID: 0
[ 21.214987] CPU: After all inits, caps: bfe9fbff 00100000 00000000
00002940 0000c189 00000000 00000000
[ 21.214997] Compat vDSO mapped to ffffe000.
[ 21.215009] Checking 'hlt' instruction... OK.
[ 21.230889] SMP alternatives: switching to UP code
[ 21.231343] Early unpacking initramfs... done
[ 21.594755] ACPI: Core revision 20070126
[ 21.594830] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml
not found.
[ 21.598616] ACPI: setting ELCR to 0af8 (from 08f8)
[ 21.610872] CPU0: Intel Genuine Intel(R) CPU T2300 @
1.66GHzstepping 08
[ 21.610889] SMP alternatives: switching to SMP code
[ 21.610994] Booting processor 1/1 eip 3000
[ 21.621205] Initializing CPU#1
[ 21.698079] Calibrating delay using timer specific routine..
3325.29BogoMIPS (lpj=6650587)
[ 21.698086] CPU: After generic identify, caps: bfe9fbff 00100000 00000000
00000000 0000c189 00000000 00000000
[ 21.698092] monitor/mwait feature present.
[ 21.698095] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 21.698097] CPU: L2 cache: 2048K
[ 21.698100] CPU: Physical Processor ID: 0
[ 21.698101] CPU: Processor Core ID: 1
[ 21.698103] CPU: After all inits, caps: bfe9fbff 00100000 00000000
00002940 0000c189 00000000 00000000
[ 21.698678] CPU1: Intel Genuine Intel(R) CPU T2300 @
1.66GHzstepping 08
[ 21.698701] Total of 2 processors activated (6654.26 BogoMIPS).
[ 21.806031] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 21.826021] Brought up 2 CPUs
[ 21.873307] migration_cost=34
[ 21.873445] Booting paravirtualized kernel on bare hardware
[ 21.873520] Time: 13:02:13 Date: 09/04/107
[ 21.873540] NET: Registered protocol family 16
[ 21.873623] EISA bus registered
[ 21.873628] ACPI: bus type pci registered
[ 21.873805] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=5
[ 21.873807] PCI: Using configuration type 1
[ 21.873809] Setting up standard PCI resources
[ 21.877921] ACPI: EC: Look up EC in DSDT
[ 21.878477] ACPI: EC: GPE=0x1c, ports=0x66, 0x62
[ 21.954330] ACPI: Interpreter enabled
[ 21.954333] ACPI: (supports S0 S...

dmesg after a fresh boot :

[   21.134840]     lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
[   21.134841]       .init : 0xc03e3000 - 0xc043e000   ( 364 kB)
[   21.134842]       .data : 0xc02f8456 - 0xc03ddea4   ( 918 kB)
[   21.134844]       .text : 0xc0100000 - 0xc02f8456   (2017 kB)
[   21.134847] Checking if this processor honours the WP bit even in
supervisor mode... Ok.
[   21.134884] SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4,
CPUs=2, Nodes=1
[   21.214793] Calibrating delay using timer specific routine..
3328.96BogoMIPS (lpj=6657939)
[   21.214819] Security Framework v1.0.0 initialized
[   21.214826] SELinux:  Disabled at boot.
[   21.214840] Mount-cache hash table entries: 512
[   21.214962] CPU: After generic identify, caps: bfe9fbff 00100000 00000000
00000000 0000c189 00000000 00000000
[   21.214971] monitor/mwait feature present.
[   21.214973] using mwait in idle threads.
[   21.214978] CPU: L1 I cache: 32K, L1 D cache: 32K
[   21.214980] CPU: L2 cache: 2048K
[   21.214983] CPU: Physical Processor ID: 0
[   21.214985] CPU: Processor Core ID: 0
[   21.214987] CPU: After all inits, caps: bfe9fbff 00100000 00000000
00002940 0000c189 00000000 00000000
[   21.214997] Compat vDSO mapped to ffffe000.
[   21.215009] Checking 'hlt' instruction... OK.
[   21.230889] SMP alternatives: switching to UP code
[   21.231343] Early unpacking initramfs... done
[   21.594755] ACPI: Core revision 20070126
[   21.594830] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml
not found.
[   21.598616] ACPI: setting ELCR to 0af8 (from 08f8)
[   21.610872] CPU0: Intel Genuine Intel(R) CPU           T2300  @
1.66GHzstepping 08
[   21.610889] SMP alternatives: switching to SMP code
[   21.610994] Booting processor 1/1 eip 3000
[   21.621205] Initializing CPU#1
[   21.698079] Calibrating delay using timer specific routine..
3325.29BogoMIPS (lpj=6650587)
[   21.698086] CPU: After generic identify, caps: bfe9fbff 00100000 00000000
00000000 0000c189 00000000 00000000
[   21.698092] monitor/mwait feature present.
[   21.698095] CPU: L1 I cache: 32K, L1 D cache: 32K
[   21.698097] CPU: L2 cache: 2048K
[   21.698100] CPU: Physical Processor ID: 0
[   21.698101] CPU: Processor Core ID: 1
[   21.698103] CPU: After all inits, caps: bfe9fbff 00100000 00000000
00002940 0000c189 00000000 00000000
[   21.698678] CPU1: Intel Genuine Intel(R) CPU           T2300  @
1.66GHzstepping 08
[   21.698701] Total of 2 processors activated (6654.26 BogoMIPS).
[   21.806031] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[   21.826021] Brought up 2 CPUs
[   21.873307] migration_cost=34
[   21.873445] Booting paravirtualized kernel on bare hardware
[   21.873520] Time: 13:02:13  Date: 09/04/107
[   21.873540] NET: Registered protocol family 16
[   21.873623] EISA bus registered
[   21.873628] ACPI: bus type pci registered
[   21.873805] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=5
[   21.873807] PCI: Using configuration type 1
[   21.873809] Setting up standard PCI resources
[   21.877921] ACPI: EC: Look up EC in DSDT
[   21.878477] ACPI: EC: GPE=0x1c, ports=0x66, 0x62
[   21.954330] ACPI: Interpreter enabled
[   21.954333] ACPI: (supports S0 S1 S3 S4 S5)
[   21.954356] ACPI: Using PIC for interrupt routing
[   21.963012] ACPI: EC: GPE=0x1c, ports=0x66, 0x62
[   21.963150] ACPI: Power Resource [GFAN] (off)
[   21.963156] Linux Plug and Play Support v0.97 (c) Adam Belay
[   21.963165] pnp: PnP ACPI init
[   21.963172] ACPI: bus type pnp registered
[   21.965433] pnp: PnP ACPI: found 13 devices
[   21.965436] ACPI: ACPI bus type pnp unregistered
[   21.965440] PnPBIOS: Disabled by ACPI PNP
[   21.965483] PCI: Probing PCI hardware
[   21.965499] PCI: Probing PCI hardware (bus 00)
[   21.966186] PCI quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
[   21.966190] PCI quirk: region 0480-04bf claimed by ICH6 GPIO
[   21.967291] PCI: Transparent bridge - 0000:00:1e.0
[   21.968180] PCI: Using IRQ router PIIX/ICH [8086/27b9] at 0000:00:1f.0
[   21.968210] PCI: setting IRQ 3 as level-triggered
[   21.968214] PCI: Found IRQ 3 for device 0000:00:1f.1
[   21.968228] PCI: Sharing IRQ 3 with 0000:00:1d.3
[   21.968291] PCI: Sharing IRQ 3 with 0000:04:01.1
[   21.968295] PCI: Sharing IRQ 3 with 0000:04:01.2
[   21.968299] PCI: Sharing IRQ 3 with 0000:04:01.3
[   21.985095] NET: Registered protocol family 8
[   21.985098] NET: Registered protocol family 20
[   21.985150] pnp: 00:01: iomem range 0xfed13000-0xfed19fff has been
reserved
[   21.985159] pnp: 00:07: iomem range 0xfed1c000-0xfed1ffff has been
reserved
[   21.985162] pnp: 00:07: iomem range 0xfed20000-0xfed8ffff has been
reserved
[   21.985167] pnp: 00:08: iomem range 0xffb80000-0xffbfffff could not be
reserved
[   21.985171] pnp: 00:08: iomem range 0xfff80000-0xffffffff could not be
reserved
[   21.985176] pnp: 00:09: iomem range 0xffc00000-0xfff7ffff could not be
reserved
[   21.985183] pnp: 00:0a: ioport range 0x400-0x41f has been reserved
[   21.985186] pnp: 00:0a: iomem range 0xfec00000-0xfec00fff has been
reserved
[   21.985190] pnp: 00:0a: iomem range 0xfee00000-0xfee00fff could not be
reserved
[   21.985193] pnp: 00:0a: iomem range 0xfec10000-0xfec17fff has been
reserved
[   21.985197] pnp: 00:0a: iomem range 0xfec28000-0xfec2ffff has been
reserved
[   21.985202] pnp: 00:0b: iomem range 0xe0000000-0xe3ffffff has been
reserved
[   21.985207] pnp: 00:0c: iomem range 0x0-0x9ffff could not be reserved
[   21.985210] pnp: 00:0c: iomem range 0xc0000-0xcffff could not be reserved
[   21.985214] pnp: 00:0c: iomem range 0xe0000-0xfffff could not be reserved
[   21.985217] pnp: 00:0c: iomem range 0x100000-0x7fffffff could not be
reserved
[   21.985678] Time: tsc clocksource has been installed.
[   22.015482] PCI: Bridge: 0000:00:01.0
[   22.015485]   IO window: 9000-bfff
[   22.015489]   MEM window: fdf00000-fdffffff
[   22.015492]   PREFETCH window: bdf00000-ddefffff
[   22.015496] PCI: Bridge: 0000:00:1c.0
[   22.015499]   IO window: c000-cfff
[   22.015505]   MEM window: fe000000-fe0fffff
[   22.015510]   PREFETCH window: disabled.
[   22.015516] PCI: Bridge: 0000:00:1c.3
[   22.015517]   IO window: disabled.
[   22.015523]   MEM window: fe100000-fe1fffff
[   22.015528]   PREFETCH window: disabled.
[   22.015541] PCI: Bus 5, cardbus bridge: 0000:04:01.0
[   22.015543]   IO window: 0000d000-0000d0ff
[   22.015548]   IO window: 0000d400-0000d4ff
[   22.015553]   PREFETCH window: 88000000-8bffffff
[   22.015558]   MEM window: 8c000000-8fffffff
[   22.015563] PCI: Bridge: 0000:00:1e.0
[   22.015566]   IO window: d000-dfff
[   22.015572]   MEM window: fe200000-feafffff
[   22.015577]   PREFETCH window: ddf00000-dfefffff
[   22.015594] PCI: setting IRQ 11 as level-triggered
[   22.015597] PCI: Found IRQ 11 for device 0000:00:01.0
[   22.015622] PCI: Sharing IRQ 11 with 0000:01:00.0
[   22.015627] PCI: Sharing IRQ 11 with 0000:02:00.0
[   22.015682] PCI: Setting latency timer of device 0000:00:01.0 to 64
[   22.015709] PCI: setting IRQ 5 as level-triggered
[   22.015712] PCI: Found IRQ 5 for device 0000:00:1c.0
[   22.015723] PCI: Sharing IRQ 5 with 0000:00:1d.1
[   22.015757] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[   22.015784] PCI: Found IRQ 3 for device 0000:00:1c.3
[   22.015817] PCI: Sharing IRQ 3 with 0000:03:00.0
[   22.015828] PCI: Setting latency timer of device 0000:00:1c.3 to 64
[   22.015844] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[   22.015863] PCI: Found IRQ 3 for device 0000:04:01.0
[   22.015925] NET: Registered protocol family 2
[   22.053602] IP route cache hash table entries: 32768 (order: 5, 131072
bytes)
[   22.053660] TCP established hash table entries: 131072 (order: 8, 1572864
bytes)
[   22.054705] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[   22.055082] TCP: Hash tables configured (established 131072 bind 65536)
[   22.055085] TCP reno registered
[   22.065700] checking if image is initramfs... it is
[   22.513006] Switched to high resolution mode on CPU 1
[   22.516888] Switched to high resolution mode on CPU 0
[   22.785935] Freeing initrd memory: 7358k freed
[   22.786045] Simple Boot Flag at 0x52 set to 0x1
[   22.786543] audit: initializing netlink socket (disabled)
[   22.786558] audit(1191502933.152:1): initialized
[   22.786654] highmem bounce pool size: 64 pages
[   22.788737] VFS: Disk quotas dquot_6.5.1
[   22.788787] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[   22.788880] io scheduler noop registered
[   22.788882] io scheduler anticipatory registered
[   22.788884] io scheduler deadline registered
[   22.788900] io scheduler cfq registered (default)
[   22.789000] Boot video device is 0000:01:00.0
[   22.789086] PCI: Setting latency timer of device 0000:00:01.0 to 64
[   22.789121] assign_interrupt_mode Found MSI capability
[   22.789151] Allocate Port Service[0000:00:01.0:pcie00]
[   22.789233] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[   22.789289] assign_interrupt_mode Found MSI capability
[   22.789335] Allocate Port Service[0000:00:1c.0:pcie00]
[   22.789370] Allocate Port Service[0000:00:1c.0:pcie02]
[   22.789468] PCI: Setting latency timer of device 0000:00:1c.3 to 64
[   22.789524] assign_interrupt_mode Found MSI capability
[   22.789569] Allocate Port Service[0000:00:1c.3:pcie00]
[   22.789602] Allocate Port Service[0000:00:1c.3:pcie02]
[   22.789777] isapnp: Scanning for PnP cards...
[   23.143771] isapnp: No Plug & Play device found
[   23.167480] Real Time Clock Driver v1.12ac
[   23.167595] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ
sharing enabled
[   23.168706] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024
blocksize
[   23.168839] input: Macintosh mouse button emulation as
/class/input/input0
[   23.168915] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[   23.168917] PNP: PS/2 controller doesn't have AUX irq; using default 12
[   23.171420] i8042.c: Detected active multiplexing controller, rev 1.1.
[   23.173042] serio: i8042 KBD port at 0x60,0x64 irq 1
[   23.173047] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[   23.173050] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[   23.173053] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[   23.173056] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[   23.173197] mice: PS/2 mouse device common for all mice
[   23.173434] EISA: Probing bus 0 at eisa.0
[   23.173473] EISA: Detected 0 cards.
[   23.173565] TCP cubic registered
[   23.173580] NET: Registered protocol family 1
[   23.173601] Using IPI No-Shortcut mode
[   23.173763]   Magic number: 11:662:27
[   23.173769]   hash matches device ttyda
[   23.174064] Freeing unused kernel memory: 364k freed
[   23.287396] input: AT Translated Set 2 keyboard as /class/input/input1
[   24.378128] AppArmor: AppArmor initialized<5>audit(1191502934.652:2):
type=1505 info="AppArmor initialized" pid=1232
[   24.386345] fuse init (API version 7.8)
[   24.391922] Failure registering capabilities with primary security
module.
[   24.410418] ACPI: Transitioning device [FN00] to D3
[   24.410420] ACPI: Transitioning device [FN00] to D3
[   24.410424] ACPI: Fan [FN00] (off)
[   24.415705] ACPI Warning (tbutils-0158): Incorrect checksum in table
[SSDT] -  83, should be 09 [20070126]
[   24.415714] ACPI: SSDT 7FFD7B30, 0CC3 (r1    AMI   CPU1PM        1 INTL
20051117)
[   24.416118] ACPI: CPU0 (power states: C1[C1] C2[C2])
[   24.416123] ACPI: Processor [CPU1] (supports 8 throttling states)
[   24.416173] ACPI Warning (tbutils-0158): Incorrect checksum in table
[SSDT] -  D6, should be 9C [20070126]
[   24.416179] ACPI: SSDT 7FFD8800, 04A4 (r1    AMI   CPU2PM        1 INTL
20051117)
[   24.416588] ACPI: CPU1 (power states: C1[C1] C2[C2])
[   24.416592] ACPI: Processor [CPU2] (supports 8 throttling states)
[   24.425964] ACPI: Thermal Zone [THRM] (29 C)
[    3.100000] Marking TSC unstable due to: possible TSC halt in C2.
[    3.104000] Time: acpi_pm clocksource has been installed.
[    3.528000] usbcore: registered new interface driver usbfs
[    3.528000] usbcore: registered new interface driver hub
[    3.528000] usbcore: registered new device driver usb
[    3.528000] PCI: setting IRQ 4 as level-triggered
[    3.528000] PCI: Found IRQ 4 for device 0000:00:1d.7
[    3.528000] PCI: Sharing IRQ 4 with 0000:00:1d.0
[    3.528000] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[    3.528000] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    3.528000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus
number 1
[    3.528000] ehci_hcd 0000:00:1d.7: debug port 1
[    3.528000] PCI: cache line size of 32 is not supported by device
0000:00:1d.7
[    3.528000] ehci_hcd 0000:00:1d.7: irq 4, io mem 0xfebfbc00
[    3.532000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10
Dec 2004
[    3.536000] usb usb1: configuration #1 chosen from 1 choice
[    3.536000] hub 1-0:1.0: USB hub found
[    3.536000] hub 1-0:1.0: 8 ports detected
[    3.544000] USB Universal Host Controller Interface driver v3.0
[    3.592000] SCSI subsystem initialized
[    3.596000] libata version 2.21 loaded.
[    3.640000] r8169 Gigabit Ethernet driver 2.2LK loaded
[    3.640000] PCI: Found IRQ 11 for device 0000:02:00.0
[    3.644000] PCI: Sharing IRQ 11 with 0000:01:00.0
[    3.644000] PCI: Setting latency timer of device 0000:02:00.0 to 64
[    3.644000] eth0: RTL8168b/8111b at 0xf881c000, 00:17:31:f5:ae:35, IRQ 11
[    3.660000] PCI: Found IRQ 4 for device 0000:00:1d.0
[    3.660000] PCI: Sharing IRQ 4 with 0000:00:1d.7
[    3.660000] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[    3.660000] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    3.660000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus
number 2
[    3.660000] uhci_hcd 0000:00:1d.0: irq 4, io base 0x0000ec00
[    3.660000] usb usb2: configuration #1 chosen from 1 choice
[    3.660000] hub 2-0:1.0: USB hub found
[    3.660000] hub 2-0:1.0: 2 ports detected
[    3.764000] PCI: Found IRQ 5 for device 0000:00:1d.1
[    3.764000] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[    3.764000] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    3.764000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus
number 3
[    3.764000] uhci_hcd 0000:00:1d.1: irq 5, io base 0x0000e880
[    3.764000] usb usb3: configuration #1 chosen from 1 choice
[    3.764000] hub 3-0:1.0: USB hub found
[    3.764000] hub 3-0:1.0: 2 ports detected
[    3.880000] PCI: setting IRQ 6 as level-triggered
[    3.880000] PCI: Found IRQ 6 for device 0000:00:1d.2
[    3.880000] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[    3.880000] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    3.880000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus
number 4
[    3.880000] uhci_hcd 0000:00:1d.2: irq 6, io base 0x0000e800
[    3.884000] usb usb4: configuration #1 chosen from 1 choice
[    3.884000] hub 4-0:1.0: USB hub found
[    3.884000] hub 4-0:1.0: 2 ports detected
[    3.992000] PCI: Found IRQ 3 for device 0000:00:1d.3
[    3.992000] PCI: Sharing IRQ 3 with 0000:00:1f.1
[    3.992000] PCI: Sharing IRQ 3 with 0000:04:01.1
[    3.992000] PCI: Sharing IRQ 3 with 0000:04:01.2
[    3.992000] PCI: Sharing IRQ 3 with 0000:04:01.3
[    3.992000] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[    3.992000] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    3.992000] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus
number 5
[    3.992000] uhci_hcd 0000:00:1d.3: irq 3, io base 0x0000e480
[    3.992000] usb usb5: configuration #1 chosen from 1 choice
[    3.992000] hub 5-0:1.0: USB hub found
[    3.992000] hub 5-0:1.0: 2 ports detected
[    4.064000] usb 1-3: new high speed USB device using ehci_hcd and address
3
[    4.116000] ata_piix 0000:00:1f.1: version 2.11
[    4.116000] PCI: Found IRQ 3 for device 0000:00:1f.1
[    4.116000] PCI: Sharing IRQ 3 with 0000:00:1d.3
[    4.116000] PCI: Sharing IRQ 3 with 0000:04:01.1
[    4.116000] PCI: Sharing IRQ 3 with 0000:04:01.2
[    4.116000] PCI: Sharing IRQ 3 with 0000:04:01.3
[    4.116000] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[    4.116000] scsi0 : ata_piix
[    4.116000] scsi1 : ata_piix
[    4.116000] ata1: PATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma
0x0001ffa0 irq 14
[    4.116000] ata2: PATA max UDMA/133 cmd 0x00010170 ctl 0x00010376 bmdma
0x0001ffa8 irq 15
[    4.200000] usb 1-3: configuration #1 chosen from 1 choice
[    4.456000] ata1.00: ATA-6: HTS541010G9AT00, MBZOA60A, max UDMA/100
[    4.456000] ata1.00: 195371568 sectors, multi 16: LBA48
[    4.456000] ata1.01: ATAPI: HL-DT-ST DVDRAM GMA-4082N, HJ02, max UDMA/33
[    4.472000] ata1.00: configured for UDMA/100
[    4.644000] ata1.01: configured for UDMA/33
[    4.644000] ata2: port disabled. ignoring.
[    4.644000] scsi 0:0:0:0: Direct-Access     ATA      HTS541010G9AT00
MBZO PQ: 0 ANSI: 5
[    4.648000] scsi 0:0:1:0: CD-ROM            HL-DT-ST DVDRAM GMA-4082N
HJ02 PQ: 0 ANSI: 5
[    4.648000] PCI: Found IRQ 3 for device 0000:04:01.1
[    4.648000] PCI: Sharing IRQ 3 with 0000:00:1d.3
[    4.648000] PCI: Sharing IRQ 3 with 0000:00:1f.1
[    4.648000] PCI: Sharing IRQ 3 with 0000:04:01.2
[    4.648000] PCI: Sharing IRQ 3 with 0000:04:01.3
[    4.696000] usb 1-7: new high speed USB device using ehci_hcd and address
5
[    4.700000] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[3]
MMIO=[feaff800-feafffff]  Max Packet=[2048]  IR/IT contexts=[4/4]
[    4.708000] sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030
MB)
[    4.708000] sd 0:0:0:0: [sda] Write Protect is off
[    4.708000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    4.708000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[    4.708000] sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030
MB)
[    4.708000] sd 0:0:0:0: [sda] Write Protect is off
[    4.708000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    4.708000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[    4.708000]  sda:<6>usb 1-7: configuration #1 chosen from 1 choice
[    5.064000]  sda1 sda2 sda3 sda4
[    5.068000] usb 2-1: new low speed USB device using uhci_hcd and address
2
[    5.084000] sd 0:0:0:0: [sda] Attached SCSI disk
[    5.104000] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2
cdda tray
[    5.104000] Uniform CD-ROM driver Revision: 3.20
[    5.104000] sr 0:0:1:0: Attached scsi CD-ROM sr0
[    5.108000] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    5.108000] sr 0:0:1:0: Attached scsi generic sg1 type 5
[    5.240000] usb 2-1: configuration #1 chosen from 1 choice
[    5.380000] Attempting manual resume
[    5.380000] swsusp: Resume From Partition 8:4
[    5.380000] PM: Checking swsusp image.
[    5.380000] PM: Resume from disk failed.
[    5.424000] kjournald starting.  Commit interval 5 seconds
[    5.424000] EXT3-fs: mounted filesystem with ordered data mode.
[    5.612000] usb 4-2: new full speed USB device using uhci_hcd and address
2
[    5.852000] usb 4-2: configuration #1 chosen from 1 choice
[    5.980000] ieee1394: Host added: ID:BUS[0-00:1023]
GUID[00e01800035fe531]
[    5.980000] usbcore: registered new interface driver libusual
[    5.980000] usbcore: registered new interface driver hiddev
[    5.992000] input: Logitech USB Optical Mouse as /class/input/input2
[    5.992000] input: USB HID v1.10 Mouse [Logitech USB Optical Mouse] on
usb-0000:00:1d.0-1
[    5.992000] usbcore: registered new interface driver usbhid
[    5.992000] /build/buildd/linux-source-2.6.22-2.6.22
/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[    6.360000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[    6.360000] ide: Assuming 33MHz system bus speed for PIO modes; override
with idebus=xx
[    6.428000] Initializing USB Mass Storage driver...
[    6.428000] scsi2 : SCSI emulation for USB Mass Storage devices
[    6.428000] usb-storage: device found at 3
[    6.428000] usb-storage: waiting for device to settle before scanning
[    6.428000] usbcore: registered new interface driver usb-storage
[    6.428000] USB Mass Storage support registered.
[   11.428000] usb-storage: device scan complete
[   11.428000] scsi 2:0:0:0: Direct-Access     SEAGATE  ST3160812A
3.AA PQ: 0 ANSI: 2
[   11.428000] sd 2:0:0:0: [sdb] 312581808 512-byte hardware sectors (160042
MB)
[   11.428000] sd 2:0:0:0: [sdb] Write Protect is off
[   11.428000] sd 2:0:0:0: [sdb] Mode Sense: 53 00 00 08
[   11.428000] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[   11.428000] sd 2:0:0:0: [sdb] 312581808 512-byte hardware sectors (160042
MB)
[   11.432000] sd 2:0:0:0: [sdb] Write Protect is off
[   11.432000] sd 2:0:0:0: [sdb] Mode Sense: 53 00 00 08
[   11.432000] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[   11.432000]  sdb: sdb1
[   11.452000] sd 2:0:0:0: [sdb] Attached SCSI disk
[   11.452000] sd 2:0:0:0: Attached scsi generic sg2 type 0
[   17.140000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   17.148000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   17.336000] intel_rng: FWH not detected
[   17.448000] Linux agpgart interface v0.102 (c) Dave Jones
[   17.804000] input: PC Speaker as /class/input/input3
[   17.820000] ieee80211_crypt: registered algorithm 'NULL'
[   17.824000] ieee80211: 802.11 data/management/control stack, git-1.1.13
[   17.824000] ieee80211: Copyright (C) 2004-2005 Intel Corporation <
jketreno@linux.intel.com>
[   17.864000] iTCO_vendor_support: vendor-support=0
[   17.864000] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007)
[   17.864000] iTCO_wdt: Found a ICH7-M TCO device (Version=2,
TCOBASE=0x0860)
[   17.864000] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   18.084000] ipw3945: Intel(R) PRO/Wireless 3945 Network Connection driver
for Linux, 1.2.2mp.ubuntu1
[   18.084000] ipw3945: Copyright(c) 2003-2006 Intel Corporation
[   18.084000] PCI: Found IRQ 3 for device 0000:03:00.0
[   18.084000] PCI: Setting latency timer of device 0000:03:00.0 to 64
[   18.084000] ipw3945: Detected Intel PRO/Wireless 3945ABG Network
Connection
[   18.124000] Bluetooth: Core ver 2.11
[   18.124000] NET: Registered protocol family 31
[   18.124000] Bluetooth: HCI device and connection manager initialized
[   18.124000] Bluetooth: HCI socket layer initialized
[   18.148000] sdhci: Secure Digital Host Controller Interface driver
[   18.148000] sdhci: Copyright(c) Pierre Ossman
[   18.220000] sdhci: SDHCI controller found at 0000:04:01.2 [1180:0822]
(rev 17)
[   18.220000] PCI: Found IRQ 3 for device 0000:04:01.2
[   18.220000] PCI: Sharing IRQ 3 with 0000:00:1d.3
[   18.220000] PCI: Sharing IRQ 3 with 0000:00:1f.1
[   18.220000] PCI: Sharing IRQ 3 with 0000:04:01.1
[   18.220000] PCI: Sharing IRQ 3 with 0000:04:01.3
[   18.220000] mmc0: SDHCI at 0xfeaff400 irq 3 DMA
[   18.260000] Bluetooth: HCI USB driver ver 2.9
[   18.264000] usbcore: registered new interface driver hci_usb
[   18.288000] Yenta: CardBus bridge found at 0000:04:01.0 [1043:1237]
[   18.416000] Yenta: ISA IRQ mask 0x0400, PCI irq 3
[   18.416000] Socket status: 30000006
[   18.416000] Yenta: Raising subordinate bus# of parent bus (#04) from #05
to #08
[   18.416000] pcmcia: parent PCI bridge I/O window: 0xd000 - 0xdfff
[   18.416000] cs: IO port probe 0xd000-0xdfff: clean.
[   18.416000] pcmcia: parent PCI bridge Memory window: 0xfe200000 -
0xfeafffff
[   18.416000] pcmcia: parent PCI bridge Memory window: 0xddf00000 -
0xdfefffff
[   18.452000] PCI: setting IRQ 7 as level-triggered
[   18.452000] PCI: Found IRQ 7 for device 0000:00:1b.0
[   18.452000] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[   18.760000] cs: IO port probe 0x100-0x3af: clean.
[   18.764000] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
[   18.764000] cs: IO port probe 0x820-0x8ff: clean.
[   18.764000] cs: IO port probe 0xc00-0xcf7: clean.
[   18.764000] cs: IO port probe 0xa00-0xaff: clean.
[   19.212000] lp: driver loaded but no devices found
[   19.304000] Adding 1004052k swap on /dev/sda4.  Priority:-1 extents:1
across:1004052k
[   19.952000] EXT3 FS on sda3, internal journal
[   20.072000] ipw3945: Detected geography ABG (13 802.11bg channels, 23
802.11a channels)
[   58.292000] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[   58.304000] Asus Laptop ACPI Extras version 0.30
[   58.304000]   unsupported model A6J, trying default values
[   58.304000]   send /proc/acpi/dsdt to the developers
[   58.344000] No dock devices found.
[   58.404000] ACPI: Battery Slot [BAT0] (battery present)
[   58.412000] ACPI: AC Adapter [AC0] (on-line)
[   58.424000] input: Power Button (FF) as /class/input/input4
[   58.424000] ACPI: Power Button (FF) [PWRF]
[   58.424000] input: Lid Switch as /class/input/input5
[   58.424000] ACPI: Lid Switch [LID]
[   58.424000] input: Power Button (CM) as /class/input/input6
[   58.424000] ACPI: Power Button (CM) [PWRB]
[   58.424000] input: Sleep Button (CM) as /class/input/input7
[   58.424000] ACPI: Sleep Button (CM) [SLPB]
[   60.064000] ppdev: user-space parallel port driver
[   60.584000] r8169: eth0: link down
[   61.036000] audit(1191495793.541:3):  type=1503
operation="inode_permission" requested_mask="a" denied_mask="a"
name="/dev/tty" pid=5127 profile="/usr/sbin/cupsd"
[   61.156000] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[   61.156000] apm: disabled - APM is not SMP safe.
[   61.380000] Failure registering capabilities with primary security
module.
[   61.620000] Bluetooth: L2CAP ver 2.8
[   61.620000] Bluetooth: L2CAP socket layer initialized
[   61.716000] Bluetooth: RFCOMM socket layer initialized
[   61.716000] Bluetooth: RFCOMM TTY layer initialized
[   61.716000] Bluetooth: RFCOMM ver 1.8
[   64.268000] fglrx: module license 'Proprietary. (C) 2002 - ATI
Technologies, Starnberg, GERMANY' taints kernel.
[   64.272000] [fglrx] Maximum main memory to use for locked dma buffers:
1899 MBytes.
[   64.272000] [fglrx] module loaded - fglrx 8.37.6 [May 25 2007] on minor 0
[   64.300000] PCI: Found IRQ 11 for device 0000:01:00.0
[   64.300000] PCI: Sharing IRQ 11 with 0000:02:00.0
[   66.424000] [fglrx] total      GART = 130023424
[   66.424000] [fglrx] free       GART = 114032640
[   66.424000] [fglrx] max single GART = 114032640
[   66.424000] [fglrx] total      LFB  = 268304384
[   66.424000] [fglrx] free       LFB  = 253915136
[   66.424000] [fglrx] max single LFB  = 253915136
[   66.424000] [fglrx] total      Inv  = 0
[   66.424000] [fglrx] free       Inv  = 0
[   66.424000] [fglrx] max single Inv  = 0
[   66.424000] [fglrx] total      TIM  = 0
[ 1029.504000] NET: Registered protocol family 10
[ 1029.504000] lo: Disabled Privacy Extensions
[ 1029.504000] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 1029.504000] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 1038.956000] NET: Registered protocol family 17
[ 1042.180000] ieee80211_crypt: registered algorithm 'WEP'
[ 1042.524000] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 1056.764000] eth1: no IPv6 routers present

Revision history for this message

spirou74 (nonameatall) wrote on 2007-10-04:

#6

Download full text (21.2 KiB)

result for sudo lspci -vvnn :

00:00.0 Host bridge [0600]: Intel Corporation Mobile 945GM/PM/GMS,
943/940GML and 945GT Express Memory Controller Hub [8086:27a0] (rev 03)
        Subsystem: ASUSTeK Computer Inc. Unknown device [1043:1237]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort+ >SERR- <PERR-
        Latency: 0
        Capabilities: [e0] Vendor Specific Information

00:01.0 PCI bridge [0604]: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML
and 945GT Express PCI Express Root Port [8086:27a1] (rev 03) (prog-if 00
[Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 0, Cache Line Size: 32 bytes
        Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
        I/O behind bridge: 00009000-0000bfff
        Memory behind bridge: fdf00000-fdffffff
        Prefetchable memory behind bridge: 00000000bdf00000-00000000ddefffff
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
        BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
        Capabilities: [88] Subsystem: Intel Corporation Mobile 945GM/PM/GMS,
943/940GML and 945GT Express PCI Express Root Port [8086:27a1]
        Capabilities: [80] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [90] Message Signalled Interrupts: Mask- 64bit-
Queue=0/0 Enable+
                Address: fee0300c Data: 4139
        Capabilities: [a0] Express Root Port (Slot+) IRQ 0
                Device: Supported: MaxPayload 128 bytes, PhantFunc 0,
ExtTag-
                Device: Latency L0s <64ns, L1 <1us
                Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
                Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
                Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
                Link: Supported Speed 2.5Gb/s, Width x16, ASPM L0s L1, Port
2
                Link: Latency L0s <256ns, L1 <4us
                Link: ASPM L0s L1 Enabled RCB 64 bytes CommClk+ ExtSynch-
                Link: Speed 2.5Gb/s, Width x16
                Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug-
Surpise-
                Slot: Number 0, PowerLimit 0.000000
                Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-
                Slot: AttnInd Off, PwrInd On, Power-
                Root: Correctable- Non-Fatal- Fatal- PME-

00:1b.0 Audio device [0403]: Intel Corporation 82801G (ICH7 Family) High
Definition Audio Controller [8086:27d8] (rev 02)
        Subsystem: ASUSTeK Computer Inc. Unknown device [1043:1123]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
        Laten...

result for sudo lspci -vvnn :

00:00.0 Host bridge [0600]: Intel Corporation Mobile 945GM/PM/GMS,
943/940GML and 945GT Express Memory Controller Hub [8086:27a0] (rev 03)
        Subsystem: ASUSTeK Computer Inc. Unknown device [1043:1237]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort+ >SERR- <PERR-
        Latency: 0
        Capabilities: [e0] Vendor Specific Information

00:01.0 PCI bridge [0604]: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML
and 945GT Express PCI Express Root Port [8086:27a1] (rev 03) (prog-if 00
[Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 0, Cache Line Size: 32 bytes
        Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
        I/O behind bridge: 00009000-0000bfff
        Memory behind bridge: fdf00000-fdffffff
        Prefetchable memory behind bridge: 00000000bdf00000-00000000ddefffff
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
        BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
        Capabilities: [88] Subsystem: Intel Corporation Mobile 945GM/PM/GMS,
943/940GML and 945GT Express PCI Express Root Port [8086:27a1]
        Capabilities: [80] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [90] Message Signalled Interrupts: Mask- 64bit-
Queue=0/0 Enable+
                Address: fee0300c  Data: 4139
        Capabilities: [a0] Express Root Port (Slot+) IRQ 0
                Device: Supported: MaxPayload 128 bytes, PhantFunc 0,
ExtTag-
                Device: Latency L0s <64ns, L1 <1us
                Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
                Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
                Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
                Link: Supported Speed 2.5Gb/s, Width x16, ASPM L0s L1, Port
2
                Link: Latency L0s <256ns, L1 <4us
                Link: ASPM L0s L1 Enabled RCB 64 bytes CommClk+ ExtSynch-
                Link: Speed 2.5Gb/s, Width x16
                Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug-
Surpise-
                Slot: Number 0, PowerLimit 0.000000
                Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-
                Slot: AttnInd Off, PwrInd On, Power-
                Root: Correctable- Non-Fatal- Fatal- PME-

00:1b.0 Audio device [0403]: Intel Corporation 82801G (ICH7 Family) High
Definition Audio Controller [8086:27d8] (rev 02)
        Subsystem: ASUSTeK Computer Inc. Unknown device [1043:1123]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 0, Cache Line Size: 32 bytes
        Interrupt: pin A routed to IRQ 7
        Region 0: Memory at febfc000 (64-bit, non-prefetchable) [size=16K]
        Capabilities: [50] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+
Queue=0/0 Enable-
                Address: 0000000000000000  Data: 0000
        Capabilities: [70] Express Unknown type IRQ 0
                Device: Supported: MaxPayload 128 bytes, PhantFunc 0,
ExtTag-
                Device: Latency L0s <64ns, L1 <1us
                Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
                Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
                Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
                Link: Supported Speed unknown, Width x0, ASPM unknown, Port
0
                Link: Latency L0s <64ns, L1 <1us
                Link: ASPM Disabled CommClk- ExtSynch-
                Link: Speed unknown, Width x0

00:1c.0 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI
Express Port 1 [8086:27d0] (rev 02) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 0, Cache Line Size: 32 bytes
        Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
        I/O behind bridge: 0000c000-0000cfff
        Memory behind bridge: fe000000-fe0fffff
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
        BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
        Capabilities: [40] Express Root Port (Slot+) IRQ 0
                Device: Supported: MaxPayload 128 bytes, PhantFunc 0,
ExtTag-
                Device: Latency L0s unlimited, L1 unlimited
                Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
                Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
                Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
                Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 1
                Link: Latency L0s <256ns, L1 <4us
                Link: ASPM Disabled RCB 64 bytes CommClk+ ExtSynch-
                Link: Speed 2.5Gb/s, Width x1
                Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug+
Surpise+
                Slot: Number 0, PowerLimit 0.000000
                Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-
                Slot: AttnInd Unknown, PwrInd Unknown, Power-
                Root: Correctable- Non-Fatal- Fatal- PME-
        Capabilities: [80] Message Signalled Interrupts: Mask- 64bit-
Queue=0/0 Enable+
                Address: fee0300c  Data: 4141
        Capabilities: [90] Subsystem: Intel Corporation 82801G (ICH7 Family)
PCI Express Port 1 [8086:27d0]
        Capabilities: [a0] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:1c.3 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI
Express Port 4 [8086:27d6] (rev 02) (prog-if 00 [Normal decode])
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 0, Cache Line Size: 32 bytes
        Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
        Memory behind bridge: fe100000-fe1fffff
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
        BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
        Capabilities: [40] Express Root Port (Slot+) IRQ 0
                Device: Supported: MaxPayload 128 bytes, PhantFunc 0,
ExtTag-
                Device: Latency L0s unlimited, L1 unlimited
                Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
                Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
                Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
                Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 4
                Link: Latency L0s <256ns, L1 <4us
                Link: ASPM L1 Enabled RCB 64 bytes CommClk+ ExtSynch-
                Link: Speed 2.5Gb/s, Width x1
                Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug+
Surpise+
                Slot: Number 0, PowerLimit 0.000000
                Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-
                Slot: AttnInd Unknown, PwrInd Unknown, Power-
                Root: Correctable- Non-Fatal- Fatal- PME-
        Capabilities: [80] Message Signalled Interrupts: Mask- 64bit-
Queue=0/0 Enable+
                Address: fee0300c  Data: 4149
        Capabilities: [90] Subsystem: Intel Corporation 82801G (ICH7 Family)
PCI Express Port 4 [8086:27d6]
        Capabilities: [a0] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:1d.0 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB
UHCI Controller #1 [8086:27c8] (rev 02) (prog-if 00 [UHCI])
        Subsystem: ASUSTeK Computer Inc. Unknown device [1043:1237]
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Interrupt: pin A routed to IRQ 4
        Region 4: I/O ports at ec00 [size=32]

00:1d.1 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB
UHCI Controller #2 [8086:27c9] (rev 02) (prog-if 00 [UHCI])
        Subsystem: ASUSTeK Computer Inc. Unknown device [1043:1237]
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Interrupt: pin B routed to IRQ 5
        Region 4: I/O ports at e880 [size=32]

00:1d.2 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB
UHCI Controller #3 [8086:27ca] (rev 02) (prog-if 00 [UHCI])
        Subsystem: ASUSTeK Computer Inc. Unknown device [1043:1237]
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Interrupt: pin C routed to IRQ 6
        Region 4: I/O ports at e800 [size=32]

00:1d.3 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB
UHCI Controller #4 [8086:27cb] (rev 02) (prog-if 00 [UHCI])
        Subsystem: ASUSTeK Computer Inc. Unknown device [1043:1237]
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Interrupt: pin D routed to IRQ 3
        Region 4: I/O ports at e480 [size=32]

00:1d.7 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB2
EHCI Controller [8086:27cc] (rev 02) (prog-if 20 [EHCI])
        Subsystem: ASUSTeK Computer Inc. Unknown device [1043:1237]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Interrupt: pin A routed to IRQ 4
        Region 0: Memory at febfbc00 (32-bit, non-prefetchable) [size=1K]
        Capabilities: [50] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [58] Debug port

00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge
[8086:2448] (rev e2) (prog-if 01 [Subtractive decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Bus: primary=00, secondary=04, subordinate=08, sec-latency=32
        I/O behind bridge: 0000d000-0000dfff
        Memory behind bridge: fe200000-feafffff
        Prefetchable memory behind bridge: 00000000ddf00000-00000000dfefffff
        Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
        BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
        Capabilities: [50] Subsystem: Intel Corporation 82801 Mobile PCI
Bridge [8086:2448]

00:1f.0 ISA bridge [0601]: Intel Corporation 82801GBM (ICH7-M) LPC Interface
Bridge [8086:27b9] (rev 02)
        Subsystem: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge
[8086:27b9]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Capabilities: [e0] Vendor Specific Information

00:1f.1 IDE interface [0101]: Intel Corporation 82801G (ICH7 Family) IDE
Controller [8086:27df] (rev 02) (prog-if 8a [Master SecP PriP])
        Subsystem: ASUSTeK Computer Inc. Unknown device [1043:1237]
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Interrupt: pin A routed to IRQ 3
        Region 0: I/O ports at 01f0 [size=8]
        Region 1: I/O ports at 03f4 [size=1]
        Region 2: I/O ports at 0170 [size=8]
        Region 3: I/O ports at 0374 [size=1]
        Region 4: I/O ports at ffa0 [size=16]

01:00.0 VGA compatible controller [0300]: ATI Technologies Inc M56P [Radeon
Mobility X1600] [1002:71c5] (prog-if 00 [VGA])
        Subsystem: ASUSTeK Computer Inc. Unknown device [1043:10b2]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 0, Cache Line Size: 32 bytes
        Interrupt: pin A routed to IRQ 11
        Region 0: Memory at c0000000 (32-bit, prefetchable) [size=256M]
        Region 1: I/O ports at b000 [size=256]
        Region 2: Memory at fdff0000 (32-bit, non-prefetchable) [size=64K]
        Expansion ROM at fdfc0000 [disabled] [size=128K]
        Capabilities: [50] Power Management version 2
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [58] Express Legacy Endpoint IRQ 0
                Device: Supported: MaxPayload 128 bytes, PhantFunc 0,
ExtTag+
                Device: Latency L0s <4us, L1 unlimited
                Device: AtnBtn- AtnInd- PwrInd-
                Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
                Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
                Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
                Link: Supported Speed 2.5Gb/s, Width x16, ASPM L0s L1, Port
0
                Link: Latency L0s <64ns, L1 <1us
                Link: ASPM L0s L1 Enabled RCB 64 bytes CommClk+ ExtSynch-
                Link: Speed 2.5Gb/s, Width x16
        Capabilities: [80] Message Signalled Interrupts: Mask- 64bit+
Queue=0/0 Enable-
                Address: 0000000000000000  Data: 0000

02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd.
RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 01)
        Subsystem: ASUSTeK Computer Inc. Unknown device [1043:11f5]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 0, Cache Line Size: 32 bytes
        Interrupt: pin A routed to IRQ 11
        Region 0: I/O ports at c800 [size=256]
        Region 2: Memory at fe0ff000 (64-bit, non-prefetchable) [size=4K]
        Expansion ROM at fe0e0000 [disabled] [size=64K]
        Capabilities: [40] Power Management version 2
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA
PME(D0-,D1+,D2+,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [48] Vital Product Data
        Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+
Queue=0/1 Enable-
                Address: 0000000000000000  Data: 0000
        Capabilities: [60] Express Endpoint IRQ 0
                Device: Supported: MaxPayload 1024 bytes, PhantFunc 0,
ExtTag-
                Device: Latency L0s unlimited, L1 unlimited
                Device: AtnBtn+ AtnInd+ PwrInd+
                Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
                Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
                Device: MaxPayload 128 bytes, MaxReadReq 512 bytes
                Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 0
                Link: Latency L0s unlimited, L1 unlimited
                Link: ASPM Disabled RCB 64 bytes CommClk+ ExtSynch-
                Link: Speed 2.5Gb/s, Width x1
        Capabilities: [84] Vendor Specific Information

03:00.0 Network controller [0280]: Intel Corporation PRO/Wireless 3945ABG
Network Connection [8086:4222] (rev 02)
        Subsystem: Intel Corporation Unknown device [8086:1001]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 0, Cache Line Size: 32 bytes
        Interrupt: pin A routed to IRQ 3
        Region 0: Memory at fe1ff000 (32-bit, non-prefetchable) [size=4K]
        Capabilities: [c8] Power Management version 2
                Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [d0] Message Signalled Interrupts: Mask- 64bit+
Queue=0/0 Enable-
                Address: 0000000000000000  Data: 0000
        Capabilities: [e0] Express Legacy Endpoint IRQ 0
                Device: Supported: MaxPayload 128 bytes, PhantFunc 0,
ExtTag-
                Device: Latency L0s <512ns, L1 unlimited
                Device: AtnBtn- AtnInd- PwrInd-
                Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
                Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
                Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
                Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 0
                Link: Latency L0s <128ns, L1 <64us
                Link: ASPM L1 Enabled RCB 64 bytes CommClk+ ExtSynch-
                Link: Speed 2.5Gb/s, Width x1

04:01.0 CardBus bridge [0607]: Ricoh Co Ltd RL5c476 II [1180:0476] (rev b3)
        Subsystem: ASUSTeK Computer Inc. Unknown device [1043:1237]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 168
        Interrupt: pin A routed to IRQ 3
        Region 0: Memory at fe200000 (32-bit, non-prefetchable) [size=4K]
        Bus: primary=04, secondary=05, subordinate=08, sec-latency=176
        Memory window 0: 88000000-8bfff000 (prefetchable)
        Memory window 1: 8c000000-8ffff000
        I/O window 0: 0000d000-0000d0ff
        I/O window 1: 0000d400-0000d4ff
        BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+
PostWrite+
        16-bit legacy interface ports at 0001

04:01.1 FireWire (IEEE 1394) [0c00]: Ricoh Co Ltd R5C552 IEEE 1394
Controller [1180:0552] (rev 08) (prog-if 10 [OHCI])
        Subsystem: ASUSTeK Computer Inc. Unknown device [1043:1237]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 64 (500ns min, 1000ns max)
        Interrupt: pin B routed to IRQ 3
        Region 0: Memory at feaff800 (32-bit, non-prefetchable) [size=2K]
        Capabilities: [dc] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=2 PME+

04:01.2 Generic system peripheral [0805]: Ricoh Co Ltd R5C822
SD/SDIO/MMC/MS/MSPro Host Adapter [1180:0822] (rev 17)
        Subsystem: ASUSTeK Computer Inc. Unknown device [1043:1237]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 64
        Interrupt: pin B routed to IRQ 3
        Region 0: Memory at feaff400 (32-bit, non-prefetchable) [size=256]
        Capabilities: [80] Power Management version 2
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=2 PME-

04:01.3 System peripheral [0880]: Ricoh Co Ltd R5C592 Memory Stick Bus Host
Adapter [1180:0592] (rev 08)
        Subsystem: ASUSTeK Computer Inc. Unknown device [1043:1237]
        Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
        Interrupt: pin B routed to IRQ 3
        Region 0: Memory at feaff000 (32-bit, non-prefetchable) [size=256]
        Capabilities: [80] Power Management version 2
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=2 PME-

Revision history for this message

spirou74 (nonameatall) wrote on 2007-10-04:

#7

The BIOS 've been updated just before installation, with the ASUS update
version :

BIOS Ver. 217

Brian Murray (brian-murray) on 2007-10-04

Changed in linux-source-2.6.22:
assignee:	nobody → ubuntu-kernel-team
status:	Incomplete → Triaged

Revision history for this message

Cleber Santz (clebersantz) wrote on 2008-07-01:

#8

I have the same issue with new Intrepid Ibex Alpha 1 ( kernel 2.6.26-2-generic ) running over Virtualbox 1.6.2 (Sun version)

adding "pci=noacpi nobiospnp noapic nolapic" on boot solve the problem

Revision history for this message

Brian Murray (brian-murray) wrote on 2008-07-03:

#9

Are you receiving the exact same fatal exception as the original reporter?

Revision history for this message

Cleber Santz (clebersantz) wrote on 2008-07-04:

#10

ubuntu_over_virtualbox Edit (27.0 KiB, application/octet-stream)

I very strange, in every boot get new error message.

This image is of the first boot, the EIP not occurs here...

Revision history for this message

Cleber Santz (clebersantz) wrote on 2008-07-04:

#11

ubuntuEIP.png Edit (26.8 KiB, image/png)

when boot for the second time get this error, now show EIP message...

Revision history for this message

Cleber Santz (clebersantz) wrote on 2008-07-04:

#12

in third boot i get the EIP error message again, but seems not the same error...

in the fourth boot, i get a error liked to the first boot

if i try, 3 or more time, sometimes boot normal

Revision history for this message

Cleber Santz (clebersantz) wrote on 2008-07-04:

#13

ubuntuEIP_2.png Edit (25.9 KiB, image/png)

Revision history for this message

Launchpad Janitor (janitor) wrote on 2008-08-11: This bug is now reported against the 'linux' package

#14

Beginning with the Hardy Heron 8.04 development cycle, all open Ubuntu kernel bugs need to be reported against the "linux" kernel package. We are automatically migrating this bug to the new "linux" package. However, development has already began for the upcoming Intrepid Ibex 8.10 release. It would be helpful if you could test the upcoming release and verify if this is still an issue - http://www.ubuntu.com/testing . If the issue still exists, please update this report by changing the Status of the "linux" task from "Incomplete" to "New". We appreciate your patience and understanding as we make this transition. Thanks!

Revision history for this message

Cleber Santz (clebersantz) wrote on 2008-08-11:

#15

After Intrepid Alpha 3, the EIP error not happen anymore. I`m getting only "kernel panic" (BUG https://bugs.launchpad.net/bugs/246067).

I think this bug can be closed .

Revision history for this message

Leann Ogasawara (leannogasawara) wrote on 2008-08-29:

#16

The Ubuntu Kernel Team is planning to move to the 2.6.27 kernel for the upcoming Intrepid Ibex 8.10 release. As a result, the kernel team would appreciate it if you could please test this newer 2.6.27 Ubuntu kernel. There are one of two ways you should be able to test:

1) If you are comfortable installing packages on your own, the linux-image-2.6.27-* package is currently available for you to install and test.

--or--

2) The upcoming Alpha5 for Intrepid Ibex 8.10 will contain this newer 2.6.27 Ubuntu kernel. Alpha5 is set to be released Thursday Sept 4. Please watch http://www.ubuntu.com/testing for Alpha5 to be announced. You should then be able to test via a LiveCD.

Please let us know immediately if this newer 2.6.27 kernel resolves the bug reported here or if the issue remains. More importantly, please open a new bug report for each new bug/regression introduced by the 2.6.27 kernel and tag the bug report with 'linux-2.6.27'. Also, please specifically note if the issue does or does not appear in the 2.6.26 kernel. Thanks again, we really appreicate your help and feedback.

Revision history for this message

Launchpad Janitor (janitor) wrote on 2008-12-23: Kernel team bugs

#17

Per a decision made by the Ubuntu Kernel Team, bugs will longer be assigned to the ubuntu-kernel-team in Launchpad as part of the bug triage process. The ubuntu-kernel-team is being unassigned from this bug report. Refer to https://wiki.ubuntu.com/KernelTeamBugPolicies for more information. Thanks.

Revision history for this message

Amit Kucheria (amitk) wrote on 2009-05-12:

#18

This bug report is being closed because we received no response to the previous inquiry for information. Please reopen if this is still an issue in the current Ubuntu release, Jaunty Jackalope 9.04 - http://www.ubuntu.com/getubuntu/download. To reopen the bug, click on the current status under the Status column and change the status back to "New". Thanks.

Changed in linux (Ubuntu):
status:	Incomplete → Won't Fix

Affects		Status	Importance	Assigned to	Milestone
	linux (Ubuntu)	Won't Fix	Undecided	Unassigned
	linux-source-2.6.22 (Ubuntu)	Won't Fix	Medium	Unassigned

Ubuntu
linux-source-2.6.22 package

Bad EIP value & kernel panic on boot

Bug Description

Other bug subscribers

Bug attachments

Remote bug watches

Ubuntulinux-source-2.6.22 package

Bad EIP value & kernel panic on boot

Bug Description

Other bug subscribers

Bug attachments

Remote bug watches

Ubuntu
linux-source-2.6.22 package