cant activate visual effects with ATI Technologies Inc RS485 [Radeon Xpress 1100 IGP] [1002:5975]

Thank you for taking the time to report this bug and helping to make Ubuntu better. What kind of graphic card does it have? The full output of 'sudo lspci -vvnn', as an attachment to your bug report, would be quite helpful. Thanks in advance.

Hello again!

My graphic card is a ati express 1150!

Thanks a lot!

2007/10/4, Brian Murray <email address hidden>:
>
> Thank you for taking the time to report this bug and helping to make
> Ubuntu better. What kind of graphic card does it have? The full output
> of 'sudo lspci -vvnn', as an attachment to your bug report, would be
> quite helpful. Thanks in advance.
>
> ** Changed in: ubuntu
> Status: New => Incomplete
>
> --
> cant activate visual effects
> https://bugs.launchpad.net/bugs/148500
> You received this bug notification because you are a direct subscriber
> of the bug.
>

Having the exact PCI ID of your graphics card, which is obtainable via 'sudo lspci -vvnn', would be very helpful.

The support is the best ive had!!

I Installed vista again, i still got the CD:s ive burned will install ubuntu
now and reply as fast as i can!

Thanks a lot for Ubuntu!!

2007/10/4, Brian Murray <email address hidden>:
>
> Having the exact PCI ID of your graphics card, which is obtainable via
> 'sudo lspci -vvnn', would be very helpful.
>
> --
> cant activate visual effects
> https://bugs.launchpad.net/bugs/148500
> You received this bug notification because you are a direct subscriber
> of the bug.
>

here is what you wanted:

Thanx!

00:00.0 Host bridge [0600]: ATI Technologies Inc RS480 Host Bridge
[1002:5950] (rev 10)
        Subsystem: Dell Unknown device [1028:01f5]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
        Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort+ <MAbort+ >SERR- <PERR-
        Latency: 64

00:01.0 PCI bridge [0604]: ATI Technologies Inc RS480 PCI Bridge [1002:5a3f]
(prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 64
        Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
        I/O behind bridge: 00009000-00009fff
        Memory behind bridge: c0100000-c01fffff
        Prefetchable memory behind bridge: 00000000c8000000-00000000cfffffff
        Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
        BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
        Capabilities: [44] HyperTransport: MSI Mapping
        Capabilities: [b0] Subsystem: ATI Technologies Inc RS480 PCI Bridge
[1002:5a3f]

00:05.0 PCI bridge [0604]: ATI Technologies Inc RS480 PCI Bridge [1002:5a37]
(prog-if 00 [Normal decode])
        Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 0, Cache Line Size: 32 bytes
        Bus: primary=00, secondary=02, subordinate=04, sec-latency=0
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
        BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
        Capabilities: [50] Power Management version 3
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [58] Express Root Port (Slot+) IRQ 0
                Device: Supported: MaxPayload 128 bytes, PhantFunc 0,
ExtTag+
                Device: Latency L0s <64ns, L1 <1us
                Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
                Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
                Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
                Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port
247
                Link: Latency L0s <64ns, L1 <1us
                Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch-
                Link: Speed 2.5Gb/s, Width x16
                Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug+
Surpise+
                Slot: Number 0, PowerLimit 0.000000
                Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-
                Slot: AttnInd Off, PwrInd Off, Power-
                Root: Correctable- Non-Fatal- Fatal- PME-
        Capabilities: [80] Message Signalled Interrupts: Mask- 64bit-
Queue=0/0 Enable-
                Address: 00000000 Data: 0000
        C...

Swedish language pack error::

An error occurred while installing packages:

Failed to fetch
http://archive.ubuntu.com/ubuntu/pool/main/l/language-pack-gnome-sv-base/language-pack-gnome-sv-base_7.10+20070803_all.deb404
Not Found [IP:
91.189.89.6 80]

The following packages are in a broken state:

This may be due to using an old installer image, or it may be due to a bug
in some of the packages listed above. More details may be found in
/var/log/syslog. The installer will try to continue anyway, but may fail at
a later point, and will not be able to install or remove other packages
(possibly including itself) from the installed system. You should first look
for newer versions of your installer image, or failing that report the
problem to your distributor.

I'm not sure how your last message is related to this bug report regarding your video card. However, it seems that your system had a problem connecting to archive.ubuntu.com to get that package. I might try using a different mirror if you are unable to regularly connect to archive.ubuntu.com.

What video driver are you using? Are you using the open source ati driver of ATI's fglrx driver? Thanks in advance.

Now everything works! I'd had to update system, then everything worked!

2007/10/15, Brian Murray <email address hidden>:
>
> What video driver are you using? Are you using the open source ati
> driver of ATI's fglrx driver? Thanks in advance.
>
> --
> cant activate visual effects with ATI Technologies Inc RS485 [Radeon
> Xpress 1100 IGP] [1002:5975]
> https://bugs.launchpad.net/bugs/148500
> You received this bug notification because you are a direct subscriber
> of the bug.
>

This bug report is being closed due to your last comment regarding this being fixed with an update. For future reference you can manage the status of your own bugs by clicking on the current status in the yellow line and then choosing a new status in the drop down box. You can learn more about bug statuses at http://wiki.ubuntu.com/Bugs/Status . Thank you again for taking the time to report this bug and helping to make Ubuntu better. Feel free to submit any future bugs you may find.