[Intrepid] Battery not noticed by ubuntu

Binary package hint: gnome-power-manager

I've got a HP EliteBook 8730w: http://h10010.www1.hp.com/wwpc/us/en/sm/WF06a/321957-321957-64295-3740645-3329741-3784202.html

The problem is Ubuntu won't detect when I'm running on battery, or even that I have one. I've activated the option to always show power mode in the notification area, but it always shows that the laptop is running on AC power even when it isn't.

I can't even do "cat /proc/acpi/battery/BAT0/state" since it freezes my entire system. I can however do "cat /proc/acpi/battery/*/state" for some reason:

$ cat /proc/acpi/battery/*/state
cat: /proc/acpi/battery/BAT0/state: No such device
present: no

Attaching output of "dmesg", and below is the output of "lspci -vv":

00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
 Subsystem: Hewlett-Packard Company Device 30ec
 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
 Latency: 0
 Capabilities: <access denied>
 Kernel modules: intel-agp

00:01.0 PCI bridge: Intel Corporation Mobile 4 Series Chipset PCI Express Graphics Port (rev 07)
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0, Cache Line Size: 64 bytes
 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
 I/O behind bridge: 00007000-00007fff
 Memory behind bridge: d8000000-daffffff
 Prefetchable memory behind bridge: 00000000c0000000-00000000cfffffff
 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
 BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
  PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
 Capabilities: <access denied>
 Kernel driver in use: pcieport-driver
 Kernel modules: shpchp

00:03.0 Communication controller: Intel Corporation Mobile 4 Series Chipset MEI Controller (rev 07)
 Subsystem: Hewlett-Packard Company Device 30ec
 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0
 Interrupt: pin A routed to IRQ 10
 Region 0: Memory at db326800 (64-bit, non-prefetchable) [size=16]
 Capabilities: <access denied>

00:03.2 IDE interface: Intel Corporation Mobile 4 Series Chipset PT IDER Controller (rev 07) (prog-if 85 [Master SecO PriO])
 Subsystem: Hewlett-Packard Company Device 30ec
 Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Interrupt: pin C routed to IRQ 18
 Region 0: I/O ports at 8160 [size=8]
 Region 1: I/O ports at 817c [size=4]
 Region 2: I/O ports at 8158 [size=8]
 Region 3: I/O ports at 8178 [size=4]
 Region 4: I/O ports at 8120 [size=16]
 Capabilities: <access denied>
 Kernel modules: ata_generic, pata_acpi

00:03.3 Serial controller: Intel Corporation Mobile 4 Series Chipset AMT SOL Redirection (rev 07) (prog-if 02)
 Subsystem: Hewlett-Packard Company Device 30ec
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0
 Interrupt: pin B routed to IRQ 17
 Region 0: I/O ports at 8150 [size=8]
 Region 1: Memory at db325000 (32-bit, non-prefetchable) [size=4K]
 Capabilities: <access denied>
 Kernel driver in use: serial

00:19.0 Ethernet controller: Intel Corporation 82567LM Gigabit Network Connection (rev 03)
 Subsystem: Hewlett-Packard Company Device 30ec
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0
 Interrupt: pin A routed to IRQ 2298
 Region 0: Memory at db300000 (32-bit, non-prefetchable) [size=128K]
 Region 1: Memory at db324000 (32-bit, non-prefetchable) [size=4K]
 Region 2: I/O ports at 80c0 [size=32]
 Capabilities: <access denied>
 Kernel driver in use: e1000e
 Kernel modules: e1000e

00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03)
 Subsystem: Hewlett-Packard Company Device 30ec
 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0
 Interrupt: pin A routed to IRQ 16
 Region 4: I/O ports at 80a0 [size=32]
 Capabilities: <access denied>
 Kernel driver in use: uhci_hcd
 Kernel modules: uhci-hcd

00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03)
 Subsystem: Hewlett-Packard Company Device 30ec
 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0
 Interrupt: pin B routed to IRQ 17
 Region 4: I/O ports at 8080 [size=32]
 Capabilities: <access denied>
 Kernel driver in use: uhci_hcd
 Kernel modules: uhci-hcd

00:1a.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03)
 Subsystem: Hewlett-Packard Company Device 30ec
 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0
 Interrupt: pin C routed to IRQ 18
 Region 4: I/O ports at 8060 [size=32]
 Capabilities: <access denied>
 Kernel driver in use: uhci_hcd
 Kernel modules: uhci-hcd

00:1a.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03) (prog-if 20)
 Subsystem: Hewlett-Packard Company Device 30ec
 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0
 Interrupt: pin D routed to IRQ 19
 Region 0: Memory at db326400 (32-bit, non-prefetchable) [size=1K]
 Capabilities: <access denied>
 Kernel driver in use: ehci_hcd
 Kernel modules: ehci-hcd

00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03)
 Subsystem: Hewlett-Packard Company Device 30ec
 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0, Cache Line Size: 64 bytes
 Interrupt: pin A routed to IRQ 17
 Region 0: Memory at db320000 (64-bit, non-prefetchable) [size=16K]
 Capabilities: <access denied>
 Kernel driver in use: HDA Intel
 Kernel modules: snd-hda-intel

00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03)
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0, Cache Line Size: 64 bytes
 Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
 Memory behind bridge: db200000-db2fffff
 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
 BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
  PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
 Capabilities: <access denied>
 Kernel driver in use: pcieport-driver
 Kernel modules: shpchp

00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 03)
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0, Cache Line Size: 64 bytes
 Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
 Memory behind bridge: db100000-db1fffff
 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
 BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
  PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
 Capabilities: <access denied>
 Kernel driver in use: pcieport-driver
 Kernel modules: shpchp

00:1c.2 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 3 (rev 03)
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0, Cache Line Size: 64 bytes
 Bus: primary=00, secondary=04, subordinate=44, sec-latency=0
 I/O behind bridge: 00005000-00006fff
 Memory behind bridge: d4000000-d7ffffff
 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
 BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
  PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
 Capabilities: <access denied>
 Kernel driver in use: pcieport-driver
 Kernel modules: shpchp

00:1c.4 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 (rev 03)
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0, Cache Line Size: 64 bytes
 Bus: primary=00, secondary=45, subordinate=85, sec-latency=0
 I/O behind bridge: 00003000-00004fff
 Memory behind bridge: d0000000-d3ffffff
 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
 BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
  PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
 Capabilities: <access denied>
 Kernel driver in use: pcieport-driver
 Kernel modules: shpchp

00:1d.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03)
 Subsystem: Hewlett-Packard Company Device 30ec
 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0
 Interrupt: pin A routed to IRQ 20
 Region 4: I/O ports at 8040 [size=32]
 Capabilities: <access denied>
 Kernel driver in use: uhci_hcd
 Kernel modules: uhci-hcd

00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03)
 Subsystem: Hewlett-Packard Company Device 30ec
 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0
 Interrupt: pin B routed to IRQ 22
 Region 4: I/O ports at 8020 [size=32]
 Capabilities: <access denied>
 Kernel driver in use: uhci_hcd
 Kernel modules: uhci-hcd

00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03)
 Subsystem: Hewlett-Packard Company Device 30ec
 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0
 Interrupt: pin C routed to IRQ 18
 Region 4: I/O ports at 8000 [size=32]
 Capabilities: <access denied>
 Kernel driver in use: uhci_hcd
 Kernel modules: uhci-hcd

00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03) (prog-if 20)
 Subsystem: Hewlett-Packard Company Device 30ec
 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0
 Interrupt: pin D routed to IRQ 20
 Region 0: Memory at db326000 (32-bit, non-prefetchable) [size=1K]
 Capabilities: <access denied>
 Kernel driver in use: ehci_hcd
 Kernel modules: ehci-hcd

00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93) (prog-if 01)
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0
 Bus: primary=00, secondary=86, subordinate=8a, sec-latency=32
 I/O behind bridge: 00002000-00002fff
 Memory behind bridge: db000000-db0fffff
 Prefetchable memory behind bridge: 00000000dc000000-00000000dfffffff
 Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
 BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
  PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
 Capabilities: <access denied>

00:1f.0 ISA bridge: Intel Corporation ICH9M-E LPC Interface Controller (rev 03)
 Subsystem: Hewlett-Packard Company Device 30ec
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0
 Capabilities: <access denied>

00:1f.2 IDE interface: Intel Corporation ICH9M/M-E 2 port SATA IDE Controller (rev 03) (prog-if 8a [Master SecP PriP])
 Subsystem: Hewlett-Packard Company Device 30ec
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0
 Interrupt: pin A routed to IRQ 21
 Region 0: I/O ports at 01f0 [size=8]
 Region 1: I/O ports at 03f4 [size=1]
 Region 2: I/O ports at 0170 [size=8]
 Region 3: I/O ports at 0374 [size=1]
 Region 4: I/O ports at 8110 [size=16]
 Region 5: I/O ports at 8100 [size=16]
 Capabilities: <access denied>
 Kernel driver in use: ata_piix
 Kernel modules: ata_generic, pata_acpi, ata_piix

00:1f.5 IDE interface: Intel Corporation ICH9M/M-E 2 port SATA IDE Controller (rev 03) (prog-if 85 [Master SecO PriO])
 Subsystem: Hewlett-Packard Company Device 30ec
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0
 Interrupt: pin C routed to IRQ 18
 Region 0: I/O ports at 8138 [size=8]
 Region 1: I/O ports at 816c [size=4]
 Region 2: I/O ports at 8130 [size=8]
 Region 3: I/O ports at 8168 [size=4]
 Region 4: I/O ports at 80f0 [size=16]
 Region 5: I/O ports at 80e0 [size=16]
 Capabilities: <access denied>
 Kernel driver in use: ata_piix
 Kernel modules: ata_generic, pata_acpi, ata_piix

01:00.0 VGA compatible controller: nVidia Corporation Device 063a (rev a1)
 Subsystem: Hewlett-Packard Company Device 30ec
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0
 Interrupt: pin A routed to IRQ 16
 Region 0: Memory at da000000 (32-bit, non-prefetchable) [size=16M]
 Region 1: Memory at c0000000 (64-bit, prefetchable) [size=256M]
 Region 3: Memory at d8000000 (64-bit, non-prefetchable) [size=32M]
 Region 5: I/O ports at 7000 [size=128]
 Capabilities: <access denied>
 Kernel driver in use: nvidia
 Kernel modules: nvidiafb, nvidia

03:00.0 Network controller: Intel Corporation Wireless WiFi Link 5100
 Subsystem: Intel Corporation Device 1011
 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0, Cache Line Size: 64 bytes
 Interrupt: pin A routed to IRQ 2297
 Region 0: Memory at db100000 (64-bit, non-prefetchable) [size=8K]
 Capabilities: <access denied>
 Kernel driver in use: iwlagn
 Kernel modules: iwlagn

86:06.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 06) (prog-if 10)
 Subsystem: Hewlett-Packard Company Device 30ec
 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 64 (500ns min, 1000ns max), Cache Line Size: 64 bytes
 Interrupt: pin A routed to IRQ 16
 Region 0: Memory at db001000 (32-bit, non-prefetchable) [size=2K]
 Capabilities: <access denied>
 Kernel driver in use: ohci1394
 Kernel modules: ohci1394

86:06.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 25)
 Subsystem: Hewlett-Packard Company Device 30ec
 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0, Cache Line Size: 64 bytes
 Interrupt: pin B routed to IRQ 17
 Region 0: Memory at db001b00 (32-bit, non-prefetchable) [size=256]
 Capabilities: <access denied>
 Kernel driver in use: sdhci-pci
 Kernel modules: sdhci-pci

86:06.2 System peripheral: Ricoh Co Ltd R5C843 MMC Host Controller (rev 14)
 Subsystem: Hewlett-Packard Company Device 30ec
 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0, Cache Line Size: 64 bytes
 Interrupt: pin B routed to IRQ 10
 Region 0: Memory at db001a00 (32-bit, non-prefetchable) [size=256]
 Capabilities: <access denied>
 Kernel driver in use: ricoh-mmc
 Kernel modules: ricoh_mmc

86:06.3 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 14)
 Subsystem: Hewlett-Packard Company Device 30ec
 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0, Cache Line Size: 64 bytes
 Interrupt: pin B routed to IRQ 10
 Region 0: Memory at db001900 (32-bit, non-prefetchable) [size=256]
 Capabilities: <access denied>

86:06.4 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev 14)
 Subsystem: Hewlett-Packard Company Device 30ec
 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0, Cache Line Size: 64 bytes
 Interrupt: pin B routed to IRQ 10
 Region 0: Memory at db001800 (32-bit, non-prefetchable) [size=256]
 Capabilities: <access denied>

86:06.5 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev bb)
 Subsystem: Hewlett-Packard Company Device 30ec
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 168
 Interrupt: pin B routed to IRQ 17
 Region 0: Memory at db000000 (32-bit, non-prefetchable) [size=4K]
 Bus: primary=86, secondary=87, subordinate=8a, sec-latency=176
 Memory window 0: dc000000-dffff000 (prefetchable)
 Memory window 1: f0000000-f3fff000
 I/O window 0: 00002000-000020ff
 I/O window 1: 00002400-000024ff
 BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt- PostWrite+
 16-bit legacy interface ports at 0001
 Kernel driver in use: yenta_cardbus
 Kernel modules: yenta_socket