Ubuntu
linux-source-2.6.15 package

Network is not working

Bug #34708 reported by Matej Kovacic
22
Affects Status Importance Assigned to Milestone
linux-source-2.6.15 (Ubuntu)
Fix Released
Medium
Unassigned

Bug Description

I reported this error before, but here I have new information. My network cards are not working uder Dapper. Fetw days ago, I wrote, that network was working during install, but it is not true - network cards are not working at all. Under Breezy everything works fine.

Here is my dmesg listing:

[4294667.296000] Linux version 2.6.15-17-386 (buildd@rothera) (gcc version 4.0.3 20060304 (prerelease) (Ubuntu 4.0.2-10ubuntu1)) #1 PREEMPT Tue Mar 7 01:47:22 UTC 2006
[4294667.296000] BIOS-provided physical RAM map:
[4294667.296000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[4294667.296000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[4294667.296000] BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved)
[4294667.296000] BIOS-e820: 0000000000100000 - 000000003f7e4000 (usable)
[4294667.296000] BIOS-e820: 000000003f7e4000 - 0000000040000000 (reserved)
[4294667.296000] BIOS-e820: 00000000d0000000 - 00000000e0000000 (reserved)
[4294667.296000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[4294667.296000] 0MB HIGHMEM available.
[4294667.296000] 1015MB LOWMEM available.
[4294667.296000] found SMP MP-table at 000fe700
[4294667.296000] On node 0 totalpages: 260068
[4294667.296000] DMA zone: 4096 pages, LIFO batch:0
[4294667.296000] DMA32 zone: 0 pages, LIFO batch:0
[4294667.296000] Normal zone: 255972 pages, LIFO batch:31
[4294667.296000] HighMem zone: 0 pages, LIFO batch:0
[4294667.296000] DMI 2.3 present.
[4294667.296000] ACPI: RSDP (v000 COMPAQ ) @ 0x000e9c10
[4294667.296000] ACPI: RSDT (v001 COMPAQ CPQ0968 0x20050405 0x00000000) @ 0x3f7f4040
[4294667.296000] ACPI: FADT (v001 COMPAQ GRANTSD 0x00000001 0x00000000) @ 0x3f7f40ec
[4294667.296000] ACPI: SSDT (v001 COMPAQ PROJECT 0x00000001 MSFT 0x0100000e) @ 0x3f7f565a
[4294667.296000] ACPI: MADT (v001 COMPAQ GRANTSD 0x00000001 0x00000000) @ 0x3f7f4160
[4294667.296000] ACPI: ASF! (v032 COMPAQ GRANTSD 0x00000001 0x00000000) @ 0x3f7f41c8
[4294667.296000] ACPI: MCFG (v001 COMPAQ GRANTSD 0x00000001 0x00000000) @ 0x3f7f422b
[4294667.296000] ACPI: DSDT (v001 COMPAQ DSDT 0x00000001 MSFT 0x0100000e) @ 0x00000000
[4294667.296000] ACPI: PM-Timer IO Port: 0xf808
[4294667.296000] ACPI: Local APIC address 0xfee00000
[4294667.296000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[4294667.296000] Processor #0 15:4 APIC version 20
[4294667.296000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[4294667.296000] Processor #1 15:4 APIC version 20
[4294667.296000] WARNING: NR_CPUS limit of 1 reached. Processor ignored.
[4294667.296000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[4294667.296000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[4294667.296000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[4294667.296000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[4294667.296000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[4294667.296000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[4294667.296000] ACPI: IRQ0 used by override.
[4294667.296000] ACPI: IRQ2 used by override.
[4294667.296000] ACPI: IRQ9 used by override.
[4294667.296000] Enabling APIC mode: Flat. Using 1 I/O APICs
[4294667.296000] Using ACPI (MADT) for SMP configuration information
[4294667.296000] Allocating PCI resources starting at 50000000 (gap: 40000000:90000000)
[4294667.296000] Built 1 zonelists
[4294667.296000] Kernel command line: root=/dev/sda4 ro quiet splash
[4294667.296000] mapped APIC to ffffd000 (fee00000)
[4294667.296000] mapped IOAPIC to ffffc000 (fec00000)
[4294667.296000] Initializing CPU#0
[4294667.296000] PID hash table entries: 4096 (order: 12, 65536 bytes)
[4294667.296000] Detected 3191.670 MHz processor.
[4294667.296000] Using pmtmr for high-res timesource
[4294667.296000] Console: colour VGA+ 80x25
[4294670.908000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[4294670.909000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[4294670.923000] Memory: 1020996k/1040272k available (1964k kernel code, 18576k reserved, 598k data, 284k init, 0k highmem)
[4294670.923000] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[4294670.983000] Calibrating delay using timer specific routine.. 6384.27 BogoMIPS (lpj=3192139)
[4294670.983000] Security Framework v1.0.0 initialized
[4294670.983000] SELinux: Disabled at boot.
[4294670.983000] Mount-cache hash table entries: 512
[4294670.983000] CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 0000441d 00000000 00000000
[4294670.983000] CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 0000441d 00000000 00000000
[4294670.983000] monitor/mwait feature present.
[4294670.983000] using mwait in idle threads.
[4294670.983000] CPU: Trace cache: 12K uops, L1 D cache: 16K
[4294670.983000] CPU: L2 cache: 1024K
[4294670.983000] CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080 0000441d 00000000 00000000
[4294670.983000] mtrr: v2.0 (20020519)
[4294670.983000] CPU: Intel(R) Pentium(R) 4 CPU 3.20GHz stepping 01
[4294670.983000] Enabling fast FPU save and restore... done.
[4294670.983000] Enabling unmasked SIMD FPU exception support... done.
[4294670.983000] Checking 'hlt' instruction... OK.
[4294670.987000] checking if image is initramfs... it is
[4294671.447000] Freeing initrd memory: 6339k freed
[4294671.451000] ACPI: Looking for DSDT ... not found!
[4294671.454000] ENABLING IO-APIC IRQs
[4294671.454000] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[4294671.565000] HP Laptop series board detected. Selecting BIOS-method for reboots.
[4294671.565000] NET: Registered protocol family 16
[4294671.565000] EISA bus registered
[4294671.565000] ACPI: bus type pci registered
[4294671.567000] PCI: PCI BIOS revision 2.20 entry at 0xec3b7, last bus=64
[4294671.567000] PCI: Using MMCONFIG
[4294671.567000] ACPI: Subsystem revision 20051216
[4294671.568000] ACPI: Interpreter enabled
[4294671.568000] ACPI: Using IOAPIC for interrupt routing
[4294671.569000] ACPI: PCI Root Bridge [PCI0] (0000:00)
[4294671.569000] PCI: Probing PCI hardware (bus 00)
[4294671.569000] ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
[4294671.570000] Boot video device is 0000:00:02.0
[4294671.571000] PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.2
[4294671.571000] PCI: Transparent bridge - 0000:00:1e.0
[4294671.571000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[4294671.582000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCX1._PRT]
[4294671.582000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCX2._PRT]
[4294671.583000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB_._PRT]
[4294671.586000] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 14 15)
[4294671.586000] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 14 15)
[4294671.586000] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 14 15)
[4294671.586000] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 14 15)
[4294671.587000] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 *11 14 15)
[4294671.587000] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *10 11 14 15)
[4294671.587000] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 14 15)
[4294671.587000] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
[4294671.587000] Linux Plug and Play Support v0.97 (c) Adam Belay
[4294671.587000] pnp: PnP ACPI init
[4294671.588000] pnp: PnPACPI: unknown resource type 7
[4294671.588000] pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0c04
[4294671.588000] pnp: PnPACPI: unknown resource type 7
[4294671.588000] pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0200
[4294671.588000] pnp: PnPACPI: unknown resource type 7
[4294671.588000] pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0b00
[4294671.588000] pnp: PnPACPI: unknown resource type 7
[4294671.588000] pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0800
[4294671.588000] pnp: PnPACPI: unknown resource type 7
[4294671.588000] pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0f13
[4294671.588000] pnp: PnPACPI: unknown resource type 7
[4294671.588000] pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0303
[4294671.588000] pnp: PnPACPI: unknown resource type 7
[4294671.588000] pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0401
[4294671.589000] pnp: PnPACPI: unknown resource type 7
[4294671.589000] pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0501
[4294671.589000] pnp: PnPACPI: unknown resource type 7
[4294671.589000] pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0700
[4294671.589000] pnp: PnPACPI: unknown resource type 7
[4294671.589000] pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0003
[4294671.589000] pnp: PnPACPI: unknown resource type 7
[4294671.589000] pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0c02
[4294671.589000] pnp: PnPACPI: unknown resource type 7
[4294671.589000] pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0c02
[4294671.589000] pnp: PnPACPI: unknown resource type 7
[4294671.589000] pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0c02
[4294671.590000] pnp: PnPACPI: unknown resource type 7
[4294671.590000] pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0c01
[4294671.590000] pnp: PnP ACPI: found 1 devices
[4294671.590000] PnPBIOS: Disabled by ACPI PNP
[4294671.590000] PCI: Using ACPI for IRQ routing
[4294671.590000] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[4294672.025000] PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0
[4294672.025000] PCI: Bridge: 0000:00:1c.0
[4294672.025000] IO window: disabled.
[4294672.025000] MEM window: disabled.
[4294672.025000] PREFETCH window: disabled.
[4294672.025000] PCI: Bridge: 0000:00:1c.1
[4294672.025000] IO window: disabled.
[4294672.025000] MEM window: f0200000-f04fffff
[4294672.025000] PREFETCH window: disabled.
[4294672.025000] PCI: Bridge: 0000:00:1e.0
[4294672.025000] IO window: 1000-1fff
[4294672.025000] MEM window: f0500000-f07fffff
[4294672.025000] PREFETCH window: disabled.
[4294672.025000] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[4294672.025000] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 169
[4294672.025000] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[4294672.025000] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[4294672.025000] audit: initializing netlink socket (disabled)
[4294672.025000] audit(1142001825.024:1): initialized
[4294672.025000] VFS: Disk quotas dquot_6.5.1
[4294672.025000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[4294672.026000] Initializing Cryptographic API
[4294672.026000] io scheduler noop registered
[4294672.026000] io scheduler anticipatory registered
[4294672.026000] io scheduler deadline registered
[4294672.026000] io scheduler cfq registered
[4294672.026000] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[4294672.026000] pcie_portdrv_probe->Dev[2660:8086] has invalid IRQ. Check vendor BIOS
[4294672.026000] assign_interrupt_mode Found MSI capability
[4294672.026000] Allocate Port Service[pcie00]
[4294672.026000] Allocate Port Service[pcie02]
[4294672.026000] Allocate Port Service[pcie03]
[4294672.026000] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 169
[4294672.026000] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[4294672.026000] assign_interrupt_mode Found MSI capability
[4294672.026000] Allocate Port Service[pcie00]
[4294672.026000] Allocate Port Service[pcie02]
[4294672.026000] Allocate Port Service[pcie03]
[4294672.026000] isapnp: Scanning for PnP cards...
[4294672.381000] isapnp: No Plug & Play device found
[4294672.397000] PNP: No PS/2 controller found. Probing ports directly.
[4294672.399000] serio: i8042 AUX port at 0x60,0x64 irq 12
[4294672.399000] serio: i8042 KBD port at 0x60,0x64 irq 1
[4294672.399000] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[4294672.399000] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[4294672.400000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[4294672.400000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[4294672.400000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[4294672.400000] ACPI: bus type ide registered
[4294672.400000] mice: PS/2 mouse device common for all mice
[4294672.400000] EISA: Probing bus 0 at eisa.0
[4294672.400000] Cannot allocate resource for EISA slot 1
[4294672.400000] Cannot allocate resource for EISA slot 3
[4294672.400000] EISA: Detected 0 cards.
[4294672.400000] NET: Registered protocol family 2
[4294672.409000] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[4294672.409000] TCP established hash table entries: 131072 (order: 7, 524288 bytes)
[4294672.409000] TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
[4294672.409000] TCP: Hash tables configured (established 131072 bind 65536)
[4294672.409000] TCP reno registered
[4294672.409000] TCP bic registered
[4294672.409000] NET: Registered protocol family 1
[4294672.409000] NET: Registered protocol family 8
[4294672.409000] NET: Registered protocol family 20
[4294672.409000] Using IPI Shortcut mode
[4294672.409000] ACPI wakeup devices:
[4294672.409000] PCI0 PEG1 PCX1 PCX2 PCX4 HUB COM1 USB1 USB2 USB3 USB4 EUSB PBTN
[4294672.409000] ACPI: (supports S0 S1 S3 S4 S5)
[4294672.409000] Freeing unused kernel memory: 284k freed
[4294672.461000] vga16fb: initializing
[4294672.461000] vga16fb: mapped to 0x800a0000
[4294672.562000] Console: switching to colour frame buffer device 80x25
[4294672.562000] fb0: VGA16 VGA frame buffer device
[4294673.683000] Capability LSM initialized
[4294673.708000] ACPI: Processor [CPU0] (supports 8 throttling states)
[4294673.980000] SCSI subsystem initialized
[4294673.981000] libata version 1.20 loaded.
[4294673.982000] ata_piix 0000:00:1f.2: version 1.05
[4294673.982000] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 201
[4294673.982000] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[4294673.982000] ata1: SATA max UDMA/133 cmd 0x1F0 ctl 0x3F6 bmdma 0x34F0 irq 14
[4294674.136000] ata1: dev 0 cfg 49:2f00 82:3069 83:7d01 84:4023 85:3069 86:3401 87:4023 88:203f
[4294674.136000] ata1: dev 0 ATA-7, max UDMA/100, 312581808 sectors: LBA48
[4294674.136000] ata1: dev 0 configured for UDMA/100
[4294674.136000] scsi0 : ata_piix
[4294674.136000] Vendor: ATA Model: ST3160023AS Rev: 3.43
[4294674.136000] Type: Direct-Access ANSI SCSI revision: 05
[4294674.136000] ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x34F8 irq 15
[4294674.457000] ata2: dev 0 cfg 49:0f00 82:0210 83:4010 84:4000 85:0210 86:0000 87:4000 88:080f
[4294674.457000] ata2: dev 0 ATAPI, max UDMA/44
[4294674.457000] ata2(0): applying bridge limits
[4294674.460000] ata2: dev 1 cfg 49:2f00 82:7c6b 83:7b09 84:4003 85:7c69 86:3a01 87:4003 88:107f
[4294674.460000] ata2: dev 1 ATA-7, max UDMA/133, 240121728 sectors: LBA
[4294674.460000] ata2(0): applying bridge limits
[4294674.460000] ata2: dev 0 configured for UDMA/44
[4294674.460000] ata2: dev 1 configured for UDMA/44
[4294674.460000] scsi1 : ata_piix
[4294674.462000] Vendor: HL-DT-ST Model: DVDRRW GWA-4166B Rev: 1.03
[4294674.462000] Type: CD-ROM ANSI SCSI revision: 05
[4294674.462000] Vendor: ATA Model: Maxtor 6Y120P0 Rev: YAR4
[4294674.462000] Type: Direct-Access ANSI SCSI revision: 05
[4294674.483000] SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB)
[4294674.483000] SCSI device sda: drive cache: write back
[4294674.486000] SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB)
[4294674.486000] SCSI device sda: drive cache: write back
[4294674.486000] sda: sda1 sda2 sda3 < sda5 sda6 sda7 > sda4
[4294674.527000] sd 0:0:0:0: Attached scsi disk sda
[4294674.527000] SCSI device sdb: 240121728 512-byte hdwr sectors (122942 MB)
[4294674.533000] SCSI device sdb: drive cache: write back
[4294674.535000] SCSI device sdb: 240121728 512-byte hdwr sectors (122942 MB)
[4294674.536000] SCSI device sdb: drive cache: write back
[4294674.536000] sdb: sdb1 sdb2
[4294674.537000] sd 1:0:1:0: Attached scsi disk sdb
[4294674.832000] usbcore: registered new driver usbfs
[4294674.832000] usbcore: registered new driver hub
[4294674.833000] USB Universal Host Controller Interface driver v2.3
[4294674.833000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 209
[4294674.833000] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[4294674.833000] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[4294674.833000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[4294674.833000] uhci_hcd 0000:00:1d.0: irq 209, io base 0x00003440
[4294674.833000] hub 1-0:1.0: USB hub found
[4294674.833000] hub 1-0:1.0: 2 ports detected
[4294674.935000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 18 (level, low) -> IRQ 217
[4294674.935000] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[4294674.935000] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[4294674.935000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[4294674.935000] uhci_hcd 0000:00:1d.1: irq 217, io base 0x00003460
[4294674.935000] hub 2-0:1.0: USB hub found
[4294674.935000] hub 2-0:1.0: 2 ports detected
[4294675.036000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 21 (level, low) -> IRQ 225
[4294675.036000] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[4294675.036000] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[4294675.036000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[4294675.036000] uhci_hcd 0000:00:1d.2: irq 225, io base 0x00003480
[4294675.036000] hub 3-0:1.0: USB hub found
[4294675.036000] hub 3-0:1.0: 2 ports detected
[4294675.137000] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 22 (level, low) -> IRQ 233
[4294675.137000] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[4294675.137000] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[4294675.137000] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[4294675.137000] uhci_hcd 0000:00:1d.3: irq 233, io base 0x000034a0
[4294675.137000] hub 4-0:1.0: USB hub found
[4294675.137000] hub 4-0:1.0: 2 ports detected
[4294675.141000] usb 1-1: new low speed USB device using uhci_hcd and address 2
[4294675.239000] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 209
[4294675.239000] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[4294675.239000] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[4294675.239000] ehci_hcd 0000:00:1d.7: debug port 1
[4294675.239000] PCI: cache line size of 128 is not supported by device 0000:00:1d.7
[4294675.240000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[4294675.240000] ehci_hcd 0000:00:1d.7: irq 209, io mem 0xcfdc0000
[4294675.243000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[4294675.244000] hub 5-0:1.0: USB hub found
[4294675.244000] hub 5-0:1.0: 8 ports detected
[4294675.458000] Attempting manual resume
[4294675.482000] EXT3-fs: mounted filesystem with ordered data mode.
[4294675.495000] kjournald starting. Commit interval 5 seconds
[4294675.657000] usb 1-1: device not accepting address 2, error -71
[4294676.379000] usb 1-1: new low speed USB device using uhci_hcd and address 4
[4294676.748000] usb 1-2: new low speed USB device using uhci_hcd and address 5
[4294680.933000] sd 0:0:0:0: Attached scsi generic sg0 type 0
[4294680.933000] 1:0:0:0: Attached scsi generic sg1 type 5
[4294680.933000] sd 1:0:1:0: Attached scsi generic sg2 type 0
[4294680.988000] sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
[4294680.988000] Uniform CD-ROM driver Revision: 3.20
[4294680.988000] sr 1:0:0:0: Attached scsi CD-ROM sr0
[4294681.785000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[4294681.787000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[4294681.845000] Linux agpgart interface v0.101 (c) Dave Jones
[4294681.847000] agpgart: Detected an Intel 915G Chipset.
[4294681.847000] agpgart: Detected 7932K stolen memory.
[4294681.864000] agpgart: AGP aperture is 256M @ 0xe0000000
[4294682.053000] tg3.c:v3.47 (Dec 28, 2005)
[4294682.053000] ACPI: PCI Interrupt 0000:40:00.0[A] -> GSI 17 (level, low) -> IRQ 169
[4294682.053000] PCI: Setting latency timer of device 0000:40:00.0 to 64
[4294682.076000] eth0: Tigon3 [partno(BCM95751) rev 4001 PHY(5750)] (PCI Express) 10/100/1000BaseT Ethernet 00:0f:fe:38:af:cc
[4294682.076000] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[1]
[4294682.076000] eth0: dma_rwctrl[76180000]
[4294682.214000] hw_random hardware driver 1.0.0 loaded
[4294682.219000] usbcore: registered new driver hiddev
[4294682.240000] input: Logitech Optical USB Mouse as /class/input/input0
[4294682.240000] input: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:1d.0-1
[4294682.262000] input: CHICONY HP Basic USB Keyboard as /class/input/input1
[4294682.262000] input: USB HID v1.10 Keyboard [CHICONY HP Basic USB Keyboard] on usb-0000:00:1d.0-2
[4294682.262000] usbcore: registered new driver usbhid
[4294682.262000] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[4294682.431000] ts: Compaq touchscreen protocol output
[4294682.587000] 8139too Fast Ethernet driver 0.9.27
[4294682.588000] ACPI: PCI Interrupt 0000:05:04.0[A] -> GSI 16 (level, low) -> IRQ 50
[4294682.589000] eth1: RealTek RTL8139 at 0xc018a000, 00:40:f4:ce:46:5f, IRQ 50
[4294682.589000] eth1: Identified 8139 chip type 'RTL-8100B/8139D'
[4294682.625000] 8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004)
[4294682.845000] ACPI: PCI Interrupt 0000:00:1e.2[A] -> GSI 21 (level, low) -> IRQ 225
[4294682.845000] PCI: Setting latency timer of device 0000:00:1e.2 to 64
[4294682.854000] eth1: link up, 100Mbps, full-duplex, lpa 0x45E1
[4294683.156000] intel8x0_measure_ac97_clock: measured 50180 usecs
[4294683.156000] intel8x0: clocking to 48000
[4294683.428000] parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]
[4294683.428000] parport0: irq 7 detected
[4294683.510000] lp0: using parport0 (polling).
[4294683.571000] Adding 1951856k swap on /dev/sda6. Priority:-1 extents:1 across:1951856k
[4294683.654000] EXT3 FS on sda4, internal journal
[4294683.758000] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
[4294683.758000] md: bitmap version 4.39
[4294684.131000] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: <email address hidden>
[4294684.671000] cdrom: open failed.
[4294685.243000] kjournald starting. Commit interval 5 seconds
[4294685.243000] EXT3 FS on sda2, internal journal
[4294685.243000] EXT3-fs: mounted filesystem with ordered data mode.
[4294685.244000] kjournald starting. Commit interval 5 seconds
[4294685.245000] EXT3 FS on sda7, internal journal
[4294685.245000] EXT3-fs: mounted filesystem with ordered data mode.
[4294685.287000] NTFS driver 2.1.25 [Flags: R/O MODULE].
[4294685.329000] NTFS volume version 3.1.
[4294685.404000] NTFS volume version 3.1.
[4294687.325000] ACPI: Power Button (FF) [PWRF]
[4294687.326000] ACPI: Power Button (CM) [PBTN]
[4294687.395000] ibm_acpi: ec object not found
[4294687.440000] wmi_add device=b7f4c800
[4294687.440000] calling WQBA
[4294690.294000] [drm] Initialized drm 1.0.0 20040925
[4294690.296000] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 50
[4294690.297000] [drm] Initialized i915 1.1.0 20040405 on minor 0:
[4294690.298000] mtrr: base(0xe0020000) is not aligned on a size(0x800000) boundary
[4294691.436000] apm: BIOS not found.
[4294693.840000] Bluetooth: Core ver 2.8
[4294693.840000] NET: Registered protocol family 31
[4294693.840000] Bluetooth: HCI device and connection manager initialized
[4294693.840000] Bluetooth: HCI socket layer initialized
[4294693.881000] Bluetooth: L2CAP ver 2.8
[4294693.881000] Bluetooth: L2CAP socket layer initialized
[4294693.883000] Bluetooth: RFCOMM socket layer initialized
[4294693.883000] Bluetooth: RFCOMM TTY layer initialized
[4294693.883000] Bluetooth: RFCOMM ver 1.7
[4294694.854000] NETDEV WATCHDOG: eth1: transmit timed out
[4294694.854000] eth1: Transmit timeout, status 0d 0000 c07f media 10.
[4294694.854000] eth1: Tx queue start entry 4 dirty entry 0.
[4294694.854000] eth1: Tx descriptor 0 is 0008003c. (queue head)
[4294694.854000] eth1: Tx descriptor 1 is 0008003c.
[4294694.854000] eth1: Tx descriptor 2 is 0008003c.
[4294694.854000] eth1: Tx descriptor 3 is 0008003c.
[4294694.854000] eth1: link up, 100Mbps, full-duplex, lpa 0x45E1
[4294706.854000] NETDEV WATCHDOG: eth1: transmit timed out
[4294706.854000] eth1: Transmit timeout, status 0d 0000 c07f media 10.
[4294706.854000] eth1: Tx queue start entry 4 dirty entry 0.
[4294706.854000] eth1: Tx descriptor 0 is 0008003c. (queue head)
[4294706.854000] eth1: Tx descriptor 1 is 0008003c.
[4294706.854000] eth1: Tx descriptor 2 is 0008003c.
[4294706.854000] eth1: Tx descriptor 3 is 0008003c.
[4294706.854000] eth1: link up, 100Mbps, full-duplex, lpa 0x45E1
[4294718.854000] NETDEV WATCHDOG: eth1: transmit timed out
[4294718.854000] eth1: Transmit timeout, status 0d 0000 c07f media 10.
[4294718.854000] eth1: Tx queue start entry 4 dirty entry 0.
[4294718.854000] eth1: Tx descriptor 0 is 0008003c. (queue head)
[4294718.854000] eth1: Tx descriptor 1 is 0008003c.
[4294718.854000] eth1: Tx descriptor 2 is 0008003c.
[4294718.854000] eth1: Tx descriptor 3 is 0008003c.
[4294718.854000] eth1: link up, 100Mbps, full-duplex, lpa 0x45E1
[4294730.854000] NETDEV WATCHDOG: eth1: transmit timed out
[4294730.854000] eth1: Transmit timeout, status 0d 0000 c07f media 10.
[4294730.854000] eth1: Tx queue start entry 4 dirty entry 0.
[4294730.854000] eth1: Tx descriptor 0 is 0008003c. (queue head)
[4294730.854000] eth1: Tx descriptor 1 is 0008003c.
[4294730.854000] eth1: Tx descriptor 2 is 0008003c.
[4294730.854000] eth1: Tx descriptor 3 is 0008003c.
[4294730.854000] eth1: link up, 100Mbps, full-duplex, lpa 0x45E1
[4294742.854000] NETDEV WATCHDOG: eth1: transmit timed out
[4294742.854000] eth1: Transmit timeout, status 0d 0000 c07f media 10.
[4294742.854000] eth1: Tx queue start entry 4 dirty entry 0.
[4294742.854000] eth1: Tx descriptor 0 is 0008003c. (queue head)
[4294742.854000] eth1: Tx descriptor 1 is 0008003c.
[4294742.854000] eth1: Tx descriptor 2 is 0008003c.
[4294742.854000] eth1: Tx descriptor 3 is 0008003c.
[4294742.854000] eth1: link up, 100Mbps, full-duplex, lpa 0x45E1
[4294754.854000] NETDEV WATCHDOG: eth1: transmit timed out
[4294754.854000] eth1: Transmit timeout, status 0d 0000 c07f media 10.
[4294754.854000] eth1: Tx queue start entry 4 dirty entry 0.
[4294754.854000] eth1: Tx descriptor 0 is 0008003c. (queue head)
[4294754.854000] eth1: Tx descriptor 1 is 0008003c.
[4294754.854000] eth1: Tx descriptor 2 is 0008003c.
[4294754.854000] eth1: Tx descriptor 3 is 0008003c.
[4294754.854000] eth1: link up, 100Mbps, full-duplex, lpa 0x45E1
[4294766.854000] NETDEV WATCHDOG: eth1: transmit timed out
[4294766.854000] eth1: Transmit timeout, status 0d 0000 c07f media 10.
[4294766.854000] eth1: Tx queue start entry 4 dirty entry 0.
[4294766.854000] eth1: Tx descriptor 0 is 0008003c. (queue head)
[4294766.854000] eth1: Tx descriptor 1 is 0008003c.
[4294766.854000] eth1: Tx descriptor 2 is 0008003c.
[4294766.854000] eth1: Tx descriptor 3 is 0008003c.
[4294766.854000] eth1: link up, 100Mbps, full-duplex, lpa 0x45E1
[4294778.854000] NETDEV WATCHDOG: eth1: transmit timed out
[4294778.854000] eth1: Transmit timeout, status 0d 0000 c07f media 10.
[4294778.854000] eth1: Tx queue start entry 4 dirty entry 0.
[4294778.854000] eth1: Tx descriptor 0 is 0008003c. (queue head)
[4294778.854000] eth1: Tx descriptor 1 is 0008003c.
[4294778.854000] eth1: Tx descriptor 2 is 0008003c.
[4294778.854000] eth1: Tx descriptor 3 is 0008003c.
[4294778.854000] eth1: link up, 100Mbps, full-duplex, lpa 0x45E1
[4294789.911000] NET: Registered protocol family 10
[4294789.912000] lo: Disabled Privacy Extensions
[4294789.912000] IPv6 over IPv4 tunneling driver
[4294790.854000] NETDEV WATCHDOG: eth1: transmit timed out
[4294790.854000] eth1: Transmit timeout, status 0d 0000 c07f media 10.
[4294790.854000] eth1: Tx queue start entry 4 dirty entry 0.
[4294790.854000] eth1: Tx descriptor 0 is 0008003c. (queue head)
[4294790.854000] eth1: Tx descriptor 1 is 0008003c.
[4294790.854000] eth1: Tx descriptor 2 is 0008003c.
[4294790.854000] eth1: Tx descriptor 3 is 0008003c.
[4294790.854000] eth1: link up, 100Mbps, full-duplex, lpa 0x45E1
[4294800.879000] eth1: no IPv6 routers present
[4294802.854000] NETDEV WATCHDOG: eth1: transmit timed out
[4294802.854000] eth1: Transmit timeout, status 0d 0000 c07f media 10.
[4294802.854000] eth1: Tx queue start entry 4 dirty entry 0.
[4294802.854000] eth1: Tx descriptor 0 is 0008003c. (queue head)
[4294802.854000] eth1: Tx descriptor 1 is 0008003c.
[4294802.854000] eth1: Tx descriptor 2 is 0008003c.
[4294802.854000] eth1: Tx descriptor 3 is 0008003c.
[4294802.854000] eth1: link up, 100Mbps, full-duplex, lpa 0x45E1
[4294814.854000] NETDEV WATCHDOG: eth1: transmit timed out
[4294814.854000] eth1: Transmit timeout, status 0d 0000 c07f media 10.
[4294814.854000] eth1: Tx queue start entry 4 dirty entry 0.
[4294814.854000] eth1: Tx descriptor 0 is 0008003c. (queue head)
[4294814.854000] eth1: Tx descriptor 1 is 0008003c.
[4294814.854000] eth1: Tx descriptor 2 is 0008003c.
[4294814.854000] eth1: Tx descriptor 3 is 0008003c.
[4294814.854000] eth1: link up, 100Mbps, full-duplex, lpa 0x45E1
[4294826.854000] NETDEV WATCHDOG: eth1: transmit timed out
[4294826.854000] eth1: Transmit timeout, status 0d 0000 c07f media 10.
[4294826.854000] eth1: Tx queue start entry 4 dirty entry 0.
[4294826.854000] eth1: Tx descriptor 0 is 0008003c. (queue head)
[4294826.854000] eth1: Tx descriptor 1 is 0008003c.
[4294826.854000] eth1: Tx descriptor 2 is 0008003c.
[4294826.854000] eth1: Tx descriptor 3 is 0008003c.
[4294826.854000] eth1: link up, 100Mbps, full-duplex, lpa 0x45E1
[4294838.854000] NETDEV WATCHDOG: eth1: transmit timed out
[4294838.854000] eth1: Transmit timeout, status 0d 0000 c07f media 10.
[4294838.854000] eth1: Tx queue start entry 4 dirty entry 0.
[4294838.854000] eth1: Tx descriptor 0 is 0008005a. (queue head)
[4294838.854000] eth1: Tx descriptor 1 is 0008004e.
[4294838.854000] eth1: Tx descriptor 2 is 00080046.
[4294838.854000] eth1: Tx descriptor 3 is 00080046.
[4294838.854000] eth1: link up, 100Mbps, full-duplex, lpa 0x45E1
[4294922.854000] NETDEV WATCHDOG: eth1: transmit timed out
[4294922.854000] eth1: Transmit timeout, status 0d 0000 c07f media 10.
[4294922.854000] eth1: Tx queue start entry 4 dirty entry 0.
[4294922.854000] eth1: Tx descriptor 0 is 0008005a. (queue head)
[4294922.854000] eth1: Tx descriptor 1 is 00080046.
[4294922.854000] eth1: Tx descriptor 2 is 0008003c.
[4294922.854000] eth1: Tx descriptor 3 is 0008003c.
[4294922.854000] eth1: link up, 100Mbps, full-duplex, lpa 0x45E1
[4294934.854000] NETDEV WATCHDOG: eth1: transmit timed out
[4294934.854000] eth1: Transmit timeout, status 0d 0000 c07f media 10.
[4294934.854000] eth1: Tx queue start entry 4 dirty entry 0.
[4294934.854000] eth1: Tx descriptor 0 is 0008003c. (queue head)
[4294934.854000] eth1: Tx descriptor 1 is 0008003c.
[4294934.854000] eth1: Tx descriptor 2 is 0008003c.
[4294934.854000] eth1: Tx descriptor 3 is 0008003c.
[4294934.854000] eth1: link up, 100Mbps, full-duplex, lpa 0x45E1
[4294946.854000] NETDEV WATCHDOG: eth1: transmit timed out
[4294946.854000] eth1: Transmit timeout, status 0d 0000 c07f media 10.
[4294946.854000] eth1: Tx queue start entry 4 dirty entry 0.
[4294946.854000] eth1: Tx descriptor 0 is 0008003c. (queue head)
[4294946.854000] eth1: Tx descriptor 1 is 0008003c.
[4294946.854000] eth1: Tx descriptor 2 is 0008003c.
[4294946.854000] eth1: Tx descriptor 3 is 0008003c.
[4294946.854000] eth1: link up, 100Mbps, full-duplex, lpa 0x45E1
[4294958.854000] NETDEV WATCHDOG: eth1: transmit timed out
[4294958.854000] eth1: Transmit timeout, status 0d 0000 c07f media 10.
[4294958.854000] eth1: Tx queue start entry 4 dirty entry 0.
[4294958.854000] eth1: Tx descriptor 0 is 0008003c. (queue head)
[4294958.854000] eth1: Tx descriptor 1 is 0008003c.
[4294958.854000] eth1: Tx descriptor 2 is 0008003c.
[4294958.854000] eth1: Tx descriptor 3 is 0008003c.
[4294958.854000] eth1: link up, 100Mbps, full-duplex, lpa 0x45E1
[4294970.854000] NETDEV WATCHDOG: eth1: transmit timed out
[4294970.854000] eth1: Transmit timeout, status 0d 0000 c07f media 10.
[4294970.854000] eth1: Tx queue start entry 4 dirty entry 0.
[4294970.854000] eth1: Tx descriptor 0 is 0008003c. (queue head)
[4294970.854000] eth1: Tx descriptor 1 is 0008003c.
[4294970.854000] eth1: Tx descriptor 2 is 0008003c.
[4294970.854000] eth1: Tx descriptor 3 is 0008003c.
[4294970.854000] eth1: link up, 100Mbps, full-duplex, lpa 0x45E1
[4294982.854000] NETDEV WATCHDOG: eth1: transmit timed out
[4294982.854000] eth1: Transmit timeout, status 0d 0000 c07f media 10.
[4294982.854000] eth1: Tx queue start entry 4 dirty entry 0.
[4294982.854000] eth1: Tx descriptor 0 is 0008003c. (queue head)
[4294982.854000] eth1: Tx descriptor 1 is 0008003c.
[4294982.854000] eth1: Tx descriptor 2 is 0008003c.
[4294982.854000] eth1: Tx descriptor 3 is 0008003c.
[4294982.854000] eth1: link up, 100Mbps, full-duplex, lpa 0x45E1
[4294994.854000] NETDEV WATCHDOG: eth1: transmit timed out
[4294994.854000] eth1: Transmit timeout, status 0d 0000 c07f media 10.
[4294994.854000] eth1: Tx queue start entry 4 dirty entry 0.
[4294994.854000] eth1: Tx descriptor 0 is 0008003c. (queue head)
[4294994.854000] eth1: Tx descriptor 1 is 0008003c.
[4294994.854000] eth1: Tx descriptor 2 is 0008003c.
[4294994.854000] eth1: Tx descriptor 3 is 0008003c.
[4294994.854000] eth1: link up, 100Mbps, full-duplex, lpa 0x45E1
[4295004.450000] ADDRCONF(NETDEV_UP): eth0: link is not ready
[4295006.074000] tg3: eth0: Link is up at 100 Mbps, full duplex.
[4295006.074000] tg3: eth0: Flow control is on for TX and on for RX.
[4295006.074000] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[4295006.854000] NETDEV WATCHDOG: eth1: transmit timed out
[4295006.854000] eth1: Transmit timeout, status 0d 0000 c07f media 10.
[4295006.854000] eth1: Tx queue start entry 4 dirty entry 0.
[4295006.854000] eth1: Tx descriptor 0 is 0008003c. (queue head)
[4295006.854000] eth1: Tx descriptor 1 is 0008003c.
[4295006.854000] eth1: Tx descriptor 2 is 0008003c.
[4295006.854000] eth1: Tx descriptor 3 is 0008003c.
[4295006.854000] eth1: link up, 100Mbps, full-duplex, lpa 0x45E1
[4295016.611000] eth0: no IPv6 routers present
[4295018.854000] NETDEV WATCHDOG: eth1: transmit timed out
[4295018.854000] eth1: Transmit timeout, status 0d 0000 c07f media 10.
[4295018.854000] eth1: Tx queue start entry 4 dirty entry 0.
[4295018.854000] eth1: Tx descriptor 0 is 0008003c. (queue head)
[4295018.854000] eth1: Tx descriptor 1 is 0008003c.
[4295018.854000] eth1: Tx descriptor 2 is 0008003c.
[4295018.854000] eth1: Tx descriptor 3 is 0008003c.
[4295018.854000] eth1: link up, 100Mbps, full-duplex, lpa 0x45E1
[4295030.854000] NETDEV WATCHDOG: eth1: transmit timed out
[4295030.854000] eth1: Transmit timeout, status 0d 0000 c07f media 10.
[4295030.854000] eth1: Tx queue start entry 4 dirty entry 0.
[4295030.854000] eth1: Tx descriptor 0 is 0008003c. (queue head)
[4295030.854000] eth1: Tx descriptor 1 is 0008003c.
[4295030.854000] eth1: Tx descriptor 2 is 0008003c.
[4295030.854000] eth1: Tx descriptor 3 is 0008003c.
[4295030.854000] eth1: link up, 100Mbps, full-duplex, lpa 0x45E1
[4295042.854000] NETDEV WATCHDOG: eth1: transmit timed out
[4295042.854000] eth1: Transmit timeout, status 0d 0000 c07f media 10.
[4295042.854000] eth1: Tx queue start entry 4 dirty entry 0.
[4295042.854000] eth1: Tx descriptor 0 is 0008003c. (queue head)
[4295042.854000] eth1: Tx descriptor 1 is 0008003c.
[4295042.854000] eth1: Tx descriptor 2 is 0008003c.
[4295042.854000] eth1: Tx descriptor 3 is 0008003c.
[4295042.854000] eth1: link up, 100Mbps, full-duplex, lpa 0x45E1
[4295054.854000] NETDEV WATCHDOG: eth1: transmit timed out
[4295054.854000] eth1: Transmit timeout, status 0d 0000 c07f media 10.
[4295054.854000] eth1: Tx queue start entry 4 dirty entry 0.
[4295054.854000] eth1: Tx descriptor 0 is 0008003c. (queue head)
[4295054.854000] eth1: Tx descriptor 1 is 0008003c.
[4295054.854000] eth1: Tx descriptor 2 is 0008003c.
[4295054.854000] eth1: Tx descriptor 3 is 0008003c.
[4295054.854000] eth1: link up, 100Mbps, full-duplex, lpa 0x45E1
[4295066.854000] NETDEV WATCHDOG: eth1: transmit timed out
[4295066.854000] eth1: Transmit timeout, status 0d 0000 c07f media 10.
[4295066.854000] eth1: Tx queue start entry 4 dirty entry 0.
[4295066.854000] eth1: Tx descriptor 0 is 0008003c. (queue head)
[4295066.854000] eth1: Tx descriptor 1 is 0008003c.
[4295066.854000] eth1: Tx descriptor 2 is 0008003c.
[4295066.854000] eth1: Tx descriptor 3 is 0008003c.
[4295066.854000] eth1: link up, 100Mbps, full-duplex, lpa 0x45E1
[4295078.854000] NETDEV WATCHDOG: eth1: transmit timed out
[4295078.854000] eth1: Transmit timeout, status 0d 0000 c07f media 10.
[4295078.854000] eth1: Tx queue start entry 4 dirty entry 0.
[4295078.854000] eth1: Tx descriptor 0 is 0008003c. (queue head)
[4295078.854000] eth1: Tx descriptor 1 is 0008003c.
[4295078.854000] eth1: Tx descriptor 2 is 0008003c.
[4295078.854000] eth1: Tx descriptor 3 is 0008003c.
[4295078.854000] eth1: link up, 100Mbps, full-duplex, lpa 0x45E1
[4295090.854000] NETDEV WATCHDOG: eth1: transmit timed out
[4295090.854000] eth1: Transmit timeout, status 0d 0000 c07f media 10.
[4295090.854000] eth1: Tx queue start entry 4 dirty entry 0.
[4295090.854000] eth1: Tx descriptor 0 is 0008003c. (queue head)
[4295090.854000] eth1: Tx descriptor 1 is 0008003c.
[4295090.854000] eth1: Tx descriptor 2 is 0008003c.
[4295090.854000] eth1: Tx descriptor 3 is 0008003c.
[4295090.854000] eth1: link up, 100Mbps, full-duplex, lpa 0x45E1
[4295102.854000] NETDEV WATCHDOG: eth1: transmit timed out
[4295102.854000] eth1: Transmit timeout, status 0d 0000 c07f media 10.
[4295102.854000] eth1: Tx queue start entry 4 dirty entry 0.
[4295102.854000] eth1: Tx descriptor 0 is 0008003c. (queue head)
[4295102.854000] eth1: Tx descriptor 1 is 0008003c.
[4295102.854000] eth1: Tx descriptor 2 is 0008003c.
[4295102.854000] eth1: Tx descriptor 3 is 0008003c.
[4295102.854000] eth1: link up, 100Mbps, full-duplex, lpa 0x45E1
[4295114.854000] NETDEV WATCHDOG: eth1: transmit timed out
[4295114.854000] eth1: Transmit timeout, status 0d 0000 c07f media 10.
[4295114.854000] eth1: Tx queue start entry 4 dirty entry 0.
[4295114.854000] eth1: Tx descriptor 0 is 0008003c. (queue head)
[4295114.854000] eth1: Tx descriptor 1 is 0008003c.
[4295114.854000] eth1: Tx descriptor 2 is 0008003c.
[4295114.854000] eth1: Tx descriptor 3 is 0008003c.
[4295114.854000] eth1: link up, 100Mbps, full-duplex, lpa 0x45E1
[4295119.154000] usb 5-7: new high speed USB device using ehci_hcd and address 4
[4295119.347000] Initializing USB Mass Storage driver...
[4295119.347000] scsi2 : SCSI emulation for USB Mass Storage devices
[4295119.347000] usb-storage: device found at 4
[4295119.347000] usb-storage: waiting for device to settle before scanning
[4295119.347000] usbcore: registered new driver usb-storage
[4295119.348000] USB Mass Storage support registered.
[4295124.348000] Vendor: Model: USB DISK 2.0 Rev: 1.0B
[4295124.348000] Type: Direct-Access ANSI SCSI revision: 00
[4295124.349000] SCSI device sdc: 507904 512-byte hdwr sectors (260 MB)
[4295124.349000] sdc: Write Protect is off
[4295124.349000] sdc: Mode Sense: 03 00 00 00
[4295124.349000] sdc: assuming drive cache: write through
[4295124.352000] SCSI device sdc: 507904 512-byte hdwr sectors (260 MB)
[4295124.352000] sdc: Write Protect is off
[4295124.352000] sdc: Mode Sense: 03 00 00 00
[4295124.352000] sdc: assuming drive cache: write through
[4295124.352000] sdc: sdc1
[4295124.353000] sd 2:0:0:0: Attached scsi removable disk sdc
[4295124.354000] sd 2:0:0:0: Attached scsi generic sg3 type 0
[4295124.354000] usb-storage: device scan complete
[4295124.796000] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[4295126.854000] NETDEV WATCHDOG: eth1: transmit timed out
[4295126.854000] eth1: Transmit timeout, status 0d 0000 c07f media 10.
[4295126.854000] eth1: Tx queue start entry 4 dirty entry 0.
[4295126.854000] eth1: Tx descriptor 0 is 0008003c. (queue head)
[4295126.854000] eth1: Tx descriptor 1 is 0008003c.
[4295126.854000] eth1: Tx descriptor 2 is 0008003c.
[4295126.854000] eth1: Tx descriptor 3 is 0008003c.
[4295126.854000] eth1: link up, 100Mbps, full-duplex, lpa 0x45E1
[4295138.854000] NETDEV WATCHDOG: eth1: transmit timed out
[4295138.854000] eth1: Transmit timeout, status 0d 0000 c07f media 10.
[4295138.854000] eth1: Tx queue start entry 4 dirty entry 0.
[4295138.854000] eth1: Tx descriptor 0 is 0008003c. (queue head)
[4295138.854000] eth1: Tx descriptor 1 is 0008003c.
[4295138.854000] eth1: Tx descriptor 2 is 0008003c.
[4295138.854000] eth1: Tx descriptor 3 is 0008003c.
[4295138.854000] eth1: link up, 100Mbps, full-duplex, lpa 0x45E1

And lspci:

0000:00:00.0 Host bridge: Intel Corporation 915G/P/GV/GL/PL/910GL Processor to I/O Controller (rev 04)
0000:00:02.0 VGA compatible controller: Intel Corporation 82915G/GV/910GL Express Chipset Family Graphics Controller (rev 04)
0000:00:1c.0 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 (rev 03)
0000:00:1c.1 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 2 (rev 03)
0000:00:1d.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 03)
0000:00:1d.1 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 (rev 03)
0000:00:1d.2 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 (rev 03)
0000:00:1d.3 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 (rev 03)
0000:00:1d.7 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller (rev 03)
0000:00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev d3)
0000:00:1e.2 Multimedia audio controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Audio Controller (rev 03)
0000:00:1f.0 ISA bridge: Intel Corporation 82801FB/FR (ICH6/ICH6R) LPC Interface Bridge (rev 03)
0000:00:1f.2 IDE interface: Intel Corporation 82801FB/FW (ICH6/ICH6W) SATA Controller (rev 03)
0000:05:04.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
0000:40:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5751 Gigabit Ethernet PCI Express (rev 01)

ifconfig listing:

eth0 Link encap:Ethernet HWaddr **:**:**:**:**:**
          inet addr:10.0.0.** Bcast:10.255.255.255 Mask:255.0.0.0
          inet6 addr: **********/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
          RX packets:349 errors:0 dropped:0 overruns:0 frame:0
          TX packets:62 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:33326 (32.5 KiB) TX bytes:4291 (4.1 KiB)
          Interrupt:169

eth1 Link encap:Ethernet HWaddr 00:**:**:**:**:**
          inet addr:193.2.***.*** Bcast:193.2.***.*** Mask:255.255.255.0
          inet6 addr: *********/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
          Interrupt:50 Base address:0xa000

lo Link encap:Local Loopback
          inet addr:127.0.0.1 Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING MTU:16436 Metric:1
          RX packets:119 errors:0 dropped:0 overruns:0 frame:0
          TX packets:119 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:10367 (10.1 KiB) TX bytes:10367 (10.1 KiB)

Hope this helps.

Revision history for this message
Daniel Robitaille (robitaille) wrote :

Please try to keep all the information about a specific problem in one bug report. There is no point in opening a new bug report each time you have new information to add.

I have marked your bug report from 2 days ago as a duplicate of this one.

Revision history for this message
Didier Raboud (odyx) wrote :

And _please_, make "attachments", do not paste as comment.

Revision history for this message
Sitsofe Wheeler (sitsofe) wrote :

Oof. Reading that dmesg output as a comment was hard work.

Anyway network cards appear to be a
BCM95751 and a
Realtek 8139

Revision history for this message
Sitsofe Wheeler (sitsofe) wrote :

Matej:

Does booting and adding either of the following options to grub help?:
pci=routeirq
acpi=off

Also, do newer kernels make a difference?

Revision history for this message
Sitsofe Wheeler (sitsofe) wrote :

Punting to linux-source-2.6.15 given dmesg errors. Setting to needsinfo pending reply from Matej.

Revision history for this message
Daniel O'Donnell (daniel-odonnell) wrote :

I have what may be a similar problem. I just tried the grub solution proposed above and had maybe a micro-second of success, but not real solution.

In upgrading to dapper LTS 2.6.15-23 from breezy 2.6.12-10 using the synaptics prompt, I lost all eth and had splash screen problems. Booting again using 2.6.12-10 solves them. I have tried this several times and it is true each time.

The networking problem seems to be that the card is completely not recognised: I can't get it started from ifdown eth0; ifup eth0, or from sudo /etc/init.d/networking restart. I also get a whole series of errors having to do with postfix (in 2.6.15-23 only). The splash screen problem is that the Ubuntu splash (the one before the login) is pushed over against the right side of the monitor.

Anyway, this seems to me to be a pretty critical error, as it wipes out network access from machines that worked fine under breezy.

Revision history for this message
Andrius Bentkus (bentkus) wrote :

I got the same realtek card. I tried almost everything, new kernel, disabled the onboard lan card and so on.
The reatek card just works well with other dists and windows...

/proc/interrupts:
           CPU0
  0: 30874 IO-APIC-edge timer
  1: 569 IO-APIC-edge i8042
  7: 1 IO-APIC-edge parport0
  8: 3 IO-APIC-edge rtc
  9: 0 IO-APIC-level acpi
 10: 0 IO-APIC-edge MPU401 UART
 12: 2055 IO-APIC-edge i8042
 14: 1790 IO-APIC-edge ide0
 50: 2 IO-APIC-level ehci_hcd:usb2
 58: 3 IO-APIC-level ohci1394
 66: 0 IO-APIC-level eth1
217: 11190 IO-APIC-level libata, eth0
225: 5723 IO-APIC-level libata, NVidia CK804
233: 13 IO-APIC-level ohci_hcd:usb1
NMI: 0
LOC: 30723
ERR: 0
MIS: 0

Revision history for this message
Daniel O'Donnell (daniel-odonnell) wrote : Re: [Bug 34708] Re: Network is not working

Changing up to the new kernel (25) solves the issue. The real problem
now is that the disk ships with a buggy kernel!

-d

On Mon, 2006-26-06 at 14:37 +0000, Andrius Bentkus wrote:
> I got the same realtek card. I tried almost everything, new kernel, disabled the onboard lan card and so on.
> The reatek card just works well with other dists and windows...
>
> /proc/interrupts:
> CPU0
> 0: 30874 IO-APIC-edge timer
> 1: 569 IO-APIC-edge i8042
> 7: 1 IO-APIC-edge parport0
> 8: 3 IO-APIC-edge rtc
> 9: 0 IO-APIC-level acpi
> 10: 0 IO-APIC-edge MPU401 UART
> 12: 2055 IO-APIC-edge i8042
> 14: 1790 IO-APIC-edge ide0
> 50: 2 IO-APIC-level ehci_hcd:usb2
> 58: 3 IO-APIC-level ohci1394
> 66: 0 IO-APIC-level eth1
> 217: 11190 IO-APIC-level libata, eth0
> 225: 5723 IO-APIC-level libata, NVidia CK804
> 233: 13 IO-APIC-level ohci_hcd:usb1
> NMI: 0
> LOC: 30723
> ERR: 0
> MIS: 0
>

Revision history for this message
Ben Collins (ben-collins) wrote :

CD problem will resolve itself at the first point release.

Changed in linux-source-2.6.15:
status: Needs Info → Fix Released
To post a comment you must log in.
This report contains Public information  
Everyone can see this information.

Duplicates of this bug

Subscribing...

Other bug subscribers

Remote bug watches

Bug watches keep track of this bug in other bug trackers.