Ubuntu
bluez-utils package

Logitech Bluetooth V270 Mouse not detected after reboot on feisty

Bug #87265 reported by Johannes Frank
2
Affects Status Importance Assigned to Milestone
bluez-utils (Ubuntu)
Invalid
Undecided
Unassigned

Bug Description

Binary package hint: bluez-utils

Mouse is deteteced with the following steps:
Press reset on Mouse. Then issue "sudo hidd --search".
After reboot the kde bluetooth applet seems to detect the mouse but is unable to connect. Also "sudo hidd --search" fails.
Again a reset on mouse followed by "sudo hidd --search" makes the mouse work again.

Attached the output of hcidump in this situation:

HCI sniffer - Bluetooth packet analyzer ver 1.33
device: hci0 snap_len: 1028 filter: 0xffffffff
> HCI Event: Connect Request (0x04) plen 10
< HCI Command: Accept Connection Request (0x01|0x0009) plen 7
> HCI Event: Command Status (0x0f) plen 4
> HCI Event: Connect Complete (0x03) plen 11
< HCI Command: Read Remote Supported Features (0x01|0x001b) plen 2
> HCI Event: Page Scan Repetition Mode Change (0x20) plen 7
> ACL data: handle 42 flags 0x02 dlen 12
    L2CAP(s): Connect req: psm 17 scid 0x004a
< ACL data: handle 42 flags 0x02 dlen 16
    L2CAP(s): Connect rsp: dcid 0x0000 scid 0x004a result 2 status 0
      Connection refused - PSM not supported
> HCI Event: Command Status (0x0f) plen 4
> HCI Event: Number of Completed Packets (0x13) plen 5
> HCI Event: Command Status (0x0f) plen 4
< HCI Command: Write Link Policy Settings (0x02|0x000d) plen 4
> HCI Event: Command Complete (0x0e) plen 6
< HCI Command: Change Connection Packet Type (0x01|0x000f) plen 4
> HCI Event: QoS Setup Complete (0x0d) plen 21
> HCI Event: Command Status (0x0f) plen 4
< HCI Command: Remote Name Request (0x01|0x0019) plen 10
> HCI Event: Connection Packet Type Changed (0x1d) plen 5
> HCI Event: Read Remote Supported Features (0x0b) plen 11
> HCI Event: Command Status (0x0f) plen 4
> HCI Event: Remote Name Req Complete (0x07) plen 255
> ACL data: handle 42 flags 0x02 dlen 12
    L2CAP(s): Connect req: psm 17 scid 0x004b
< ACL data: handle 42 flags 0x02 dlen 16
    L2CAP(s): Connect rsp: dcid 0x0000 scid 0x004b result 2 status 0
      Connection refused - PSM not supported
> HCI Event: Number of Completed Packets (0x13) plen 5
> HCI Event: Disconn Complete (0x05) plen 4
> HCI Event: Connect Request (0x04) plen 10
< HCI Command: Accept Connection Request (0x01|0x0009) plen 7
> HCI Event: Command Status (0x0f) plen 4
> HCI Event: Connect Complete (0x03) plen 11
< HCI Command: Read Remote Supported Features (0x01|0x001b) plen 2
> HCI Event: Page Scan Repetition Mode Change (0x20) plen 7
> HCI Event: Command Status (0x0f) plen 4
> ACL data: handle 43 flags 0x02 dlen 12
    L2CAP(s): Connect req: psm 17 scid 0x004c
< ACL data: handle 43 flags 0x02 dlen 16
    L2CAP(s): Connect rsp: dcid 0x0000 scid 0x004c result 2 status 0
      Connection refused - PSM not supported
> HCI Event: Number of Completed Packets (0x13) plen 5
> HCI Event: Command Status (0x0f) plen 4
< HCI Command: Write Link Policy Settings (0x02|0x000d) plen 4
> HCI Event: Command Complete (0x0e) plen 6
< HCI Command: Change Connection Packet Type (0x01|0x000f) plen 4
> HCI Event: QoS Setup Complete (0x0d) plen 21
> HCI Event: Command Status (0x0f) plen 4
< HCI Command: Remote Name Request (0x01|0x0019) plen 10
> HCI Event: Connection Packet Type Changed (0x1d) plen 5
> HCI Event: Read Remote Supported Features (0x0b) plen 11
> HCI Event: Command Status (0x0f) plen 4
> HCI Event: Remote Name Req Complete (0x07) plen 255
> ACL data: handle 43 flags 0x02 dlen 12
    L2CAP(s): Connect req: psm 17 scid 0x004d
< ACL data: handle 43 flags 0x02 dlen 16
    L2CAP(s): Connect rsp: dcid 0x0000 scid 0x004d result 2 status 0
      Connection refused - PSM not supported
> HCI Event: Number of Completed Packets (0x13) plen 5
> HCI Event: Disconn Complete (0x05) plen 4
> HCI Event: Connect Request (0x04) plen 10
< HCI Command: Accept Connection Request (0x01|0x0009) plen 7
> HCI Event: Command Status (0x0f) plen 4
> HCI Event: Connect Complete (0x03) plen 11
< HCI Command: Read Remote Supported Features (0x01|0x001b) plen 2
> HCI Event: Page Scan Repetition Mode Change (0x20) plen 7
> HCI Event: Command Status (0x0f) plen 4
> ACL data: handle 44 flags 0x02 dlen 12
    L2CAP(s): Connect req: psm 17 scid 0x004e
< ACL data: handle 44 flags 0x02 dlen 16
    L2CAP(s): Connect rsp: dcid 0x0000 scid 0x004e result 2 status 0
      Connection refused - PSM not supported
> HCI Event: Number of Completed Packets (0x13) plen 5
> HCI Event: Command Status (0x0f) plen 4
< HCI Command: Write Link Policy Settings (0x02|0x000d) plen 4
> HCI Event: Command Complete (0x0e) plen 6
< HCI Command: Change Connection Packet Type (0x01|0x000f) plen 4
> HCI Event: QoS Setup Complete (0x0d) plen 21
> HCI Event: Command Status (0x0f) plen 4
< HCI Command: Remote Name Request (0x01|0x0019) plen 10
> HCI Event: Connection Packet Type Changed (0x1d) plen 5
> HCI Event: Read Remote Supported Features (0x0b) plen 11
> HCI Event: Command Status (0x0f) plen 4
> HCI Event: Remote Name Req Complete (0x07) plen 255
> HCI Event: Disconn Complete (0x05) plen 4
> HCI Event: Connect Request (0x04) plen 10
< HCI Command: Accept Connection Request (0x01|0x0009) plen 7
> HCI Event: Command Status (0x0f) plen 4
> HCI Event: Connect Complete (0x03) plen 11
< HCI Command: Read Remote Supported Features (0x01|0x001b) plen 2
> HCI Event: Page Scan Repetition Mode Change (0x20) plen 7
> HCI Event: Command Status (0x0f) plen 4
> ACL data: handle 45 flags 0x02 dlen 12
    L2CAP(s): Connect req: psm 17 scid 0x004f
< ACL data: handle 45 flags 0x02 dlen 16
    L2CAP(s): Connect rsp: dcid 0x0000 scid 0x004f result 2 status 0
      Connection refused - PSM not supported
> HCI Event: Number of Completed Packets (0x13) plen 5
> HCI Event: Command Status (0x0f) plen 4
< HCI Command: Write Link Policy Settings (0x02|0x000d) plen 4
> HCI Event: Command Complete (0x0e) plen 6
< HCI Command: Change Connection Packet Type (0x01|0x000f) plen 4
> HCI Event: QoS Setup Complete (0x0d) plen 21
> HCI Event: Command Status (0x0f) plen 4
< HCI Command: Remote Name Request (0x01|0x0019) plen 10
> HCI Event: Connection Packet Type Changed (0x1d) plen 5
> HCI Event: Read Remote Supported Features (0x0b) plen 11
> HCI Event: Command Status (0x0f) plen 4
> HCI Event: Remote Name Req Complete (0x07) plen 255
> HCI Event: Disconn Complete (0x05) plen 4
< HCI Command: Inquiry (0x01|0x0001) plen 5
> HCI Event: Command Status (0x0f) plen 4
> HCI Event: Inquiry Result with RSSI (0x22) plen 15
> HCI Event: Inquiry Result with RSSI (0x22) plen 15
> HCI Event: Inquiry Result with RSSI (0x22) plen 15
> HCI Event: Inquiry Result with RSSI (0x22) plen 15
> HCI Event: Inquiry Result with RSSI (0x22) plen 15
> HCI Event: Inquiry Result with RSSI (0x22) plen 15
> HCI Event: Inquiry Result with RSSI (0x22) plen 15
> HCI Event: Inquiry Result with RSSI (0x22) plen 15
> HCI Event: Inquiry Result with RSSI (0x22) plen 15
> HCI Event: Inquiry Result with RSSI (0x22) plen 15
> HCI Event: Inquiry Result with RSSI (0x22) plen 15
> HCI Event: Inquiry Result with RSSI (0x22) plen 15
> HCI Event: Inquiry Result with RSSI (0x22) plen 15
> HCI Event: Inquiry Result with RSSI (0x22) plen 15
> HCI Event: Inquiry Result with RSSI (0x22) plen 15
> HCI Event: Inquiry Result with RSSI (0x22) plen 15
> HCI Event: Inquiry Result with RSSI (0x22) plen 15
> HCI Event: Inquiry Result with RSSI (0x22) plen 15
> HCI Event: Inquiry Result with RSSI (0x22) plen 15
> HCI Event: Inquiry Result with RSSI (0x22) plen 15
> HCI Event: Inquiry Result with RSSI (0x22) plen 15
> HCI Event: Inquiry Result with RSSI (0x22) plen 15
> HCI Event: Inquiry Complete (0x01) plen 1
< HCI Command: Create Connection (0x01|0x0005) plen 13
> HCI Event: Command Status (0x0f) plen 4
> HCI Event: Connect Complete (0x03) plen 11
< ACL data: handle 42 flags 0x02 dlen 12
    L2CAP(s): Connect req: psm 1 scid 0x0040
< HCI Command: Read Remote Supported Features (0x01|0x001b) plen 2
> HCI Event: Number of Completed Packets (0x13) plen 5
> ACL data: handle 42 flags 0x02 dlen 16
    L2CAP(s): Connect rsp: dcid 0x0050 scid 0x0040 result 1 status 2
      Connection pending - Authorization pending
> HCI Event: Command Status (0x0f) plen 4
< HCI Command: Write Link Policy Settings (0x02|0x000d) plen 4
> HCI Event: Command Complete (0x0e) plen 6
< HCI Command: Remote Name Request (0x01|0x0019) plen 10
> ACL data: handle 42 flags 0x02 dlen 16
    L2CAP(s): Connect rsp: dcid 0x0050 scid 0x0040 result 0 status 0
      Connection successful
< ACL data: handle 42 flags 0x02 dlen 12
    L2CAP(s): Config req: dcid 0x0050 flags 0x00 clen 0
> HCI Event: Command Status (0x0f) plen 4
> HCI Event: Number of Completed Packets (0x13) plen 5
> HCI Event: Read Remote Supported Features (0x0b) plen 11
> ACL data: handle 42 flags 0x02 dlen 14
    L2CAP(s): Config rsp: scid 0x0040 flags 0x00 result 0 clen 0
      Success
> ACL data: handle 42 flags 0x02 dlen 16
    L2CAP(s): Config req: dcid 0x0040 flags 0x00 clen 4
      MTU 48
< ACL data: handle 42 flags 0x02 dlen 18
    L2CAP(s): Config rsp: scid 0x0050 flags 0x00 result 0 clen 4
      Success
      MTU 48
< ACL data: handle 42 flags 0x02 dlen 24
    L2CAP(d): cid 0x0050 len 20 [psm 1]
        SDP SSA Req: tid 0x0 len 0xf
          pat uuid-16 0x1200 (PNPInfo)
          max 65535
          aid(s) 0x0000 - 0xffff
          ...

ProblemType: Bug
Date: Fri Feb 23 08:44:47 2007
DistroRelease: Ubuntu 7.04
Uname: Linux johannes-laptop 2.6.20-rc6-ubuntu1 #1 Sun Feb 11 15:39:29 CET 2007 i686 GNU/Linux

Revision history for this message
Johannes Frank (jmfrank) wrote :

The problem is solved, this is not a bug!
I am sorry for any inconvenience.
I used address of mouse instead of interface in HIDD_OPTIONS.
After exchanging everything worked as expected.
Please close.

Revision history for this message
Onkar Shinde (onkarshinde) wrote :

Not a bug as per original reporter.

Changed in bluez-utils:
status: Unconfirmed → Rejected
To post a comment you must log in.
This report contains Public information  
Everyone can see this information.
Subscribing...

Other bug subscribers

Remote bug watches

Bug watches keep track of this bug in other bug trackers.