Beryl crashes at "beryl-manager" command

i downloaded Beryl and installed it.. made changes to my xorg.conf and restarted edgy.

typed beryl-manager in console, beryl wont start. Beryl is loaded but when i try to use "beryl settings manager" this error comes up

i think problem is in my xorg-conf ....
i have 2 monitors, "dualhead" ....
posting it here... can it be "fglrx" ???

Section "ServerLayout"
 Identifier "Default Layout"
 Screen 0 "aticonfig-Screen[0]" 0 0
 Screen "aticonfig-Screen[1]" RightOf "aticonfig-Screen[0]"
 InputDevice "Generic Keyboard"
 InputDevice "Configured Mouse"
 InputDevice "stylus" "SendCoreEvents"
 InputDevice "cursor" "SendCoreEvents"
 InputDevice "eraser" "SendCoreEvents"
EndSection

Section "Files"

 # path to defoma fonts
 FontPath "/usr/share/X11/fonts/misc"
 FontPath "/usr/share/X11/fonts/cyrillic"
 FontPath "/usr/share/X11/fonts/100dpi/:unscaled"
 FontPath "/usr/share/X11/fonts/75dpi/:unscaled"
 FontPath "/usr/share/X11/fonts/Type1"
 FontPath "/usr/share/X11/fonts/100dpi"
 FontPath "/usr/share/X11/fonts/75dpi"
 FontPath "/usr/share/fonts/X11/misc"
 FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
 Load "i2c"
 Load "bitmap"
 Load "ddc"
 Load "dri"
 Load "extmod"
 Load "freetype"
 Load "glx"
 Load "int10"
 Load "type1"
 Load "vbe"
EndSection

Section "InputDevice"
 Identifier "Generic Keyboard"
 Driver "kbd"
 Option "CoreKeyboard"
 Option "XkbRules" "xorg"
 Option "XkbModel" "pc105"
 Option "XkbLayout" "fi"
 Option "XkbOptions" "lv3:ralt_switch"
EndSection

Section "InputDevice"
 Identifier "Configured Mouse"
 Driver "mouse"
 Option "CorePointer"
 Option "Device" "/dev/input/mice"
 Option "Protocol" "ExplorerPS/2"
 Option "ZAxisMapping" "4 5"
 Option "Emulate3Buttons" "true"
EndSection

Section "InputDevice"

                                                      # /dev/input/event
                                                      # for USB
 Identifier "stylus"
 Driver "wacom"
 Option "Device" "/dev/wacom" # Change to
 Option "Type" "stylus"
 Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection

Section "InputDevice"

                                                      # /dev/input/event
                                                      # for USB
 Identifier "eraser"
 Driver "wacom"
 Option "Device" "/dev/wacom" # Change to
 Option "Type" "eraser"
 Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection

Section "InputDevice"

                                                      # /dev/input/event
                                                      # for USB
 Identifier "cursor"
 Driver "wacom"
 Option "Device" "/dev/wacom" # Change to
 Option "Type" "cursor"
 Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection

Section "Monitor"
 Identifier "DELL M991"
 Option "DPMS"
EndSection

Section "Monitor"
 Identifier "aticonfig-Monitor[0]"
 Option "VendorName" "ATI Proprietary Driver"
 Option "ModelName" "Generic Autodetecting Monitor"
 Option "DPMS" "true"
EndSection

Section "Monitor"
 Identifier "aticonfig-Monitor[1]"
 Option "VendorName" "ATI Proprietary Driver"
 Option "ModelName" "Generic Autodetecting Monitor"
 Option "DPMS" "true"
EndSection

Section "Device"
 Identifier "ATI Technologies Inc RV350 AP [Radeon 9600]"
 Driver "ati"
 BusID "PCI:1:0:0"
 Option "DRI" "true"
 Option "ColorTiling" "on"
 Option "EnablePageFlip" "true"
 ## Some may experience very poor performance without hashing the following line.
 Option "AccelMethod" "EXA"
 ## If above is hashed, change the following to "XAANoOffscreenPixmaps"
 Option "EXANoOffscreenPixmaps"
 Option "RenderAccel" "true"
 #Option "AGPMode" "x" <- x may be 1, 2, 4, or 8 depending on your system
 Option "AGPFastWrite" "on"
EndSection

Section "Device"
 Identifier "aticonfig-Device[0]"
 Driver "fglrx"
 BusID "PCI:1:0:0"
EndSection

Section "Device"
 Identifier "aticonfig-Device[1]"
 Driver "fglrx"
 BusID "PCI:1:0:0"
 Screen 1
EndSection

Section "Screen"
 Identifier "Default Screen"
 Device "ATI Technologies Inc RV350 AP [Radeon 9600]"
 Monitor "DELL M991"
 DefaultDepth 24
 SubSection "Display"
  Depth 1
  Modes "1280x1024" "1024x768" "800x600" "640x480"
 EndSubSection
 SubSection "Display"
  Depth 4
  Modes "1280x1024" "1024x768" "800x600" "640x480"
 EndSubSection
 SubSection "Display"
  Depth 8
  Modes "1280x1024" "1024x768" "800x600" "640x480"
 EndSubSection
 SubSection "Display"
  Depth 15
  Modes "1280x1024" "1024x768" "800x600" "640x480"
 EndSubSection
 SubSection "Display"
  Depth 16
  Modes "1280x1024" "1024x768" "800x600" "640x480"
 EndSubSection
 SubSection "Display"
  Depth 24
  Modes "1280x1024" "1024x768" "800x600" "640x480"
 EndSubSection
EndSection

Section "Screen"
 Identifier "aticonfig-Screen[0]"
 Device "aticonfig-Device[0]"
 Monitor "aticonfig-Monitor[0]"
 DefaultDepth 24
 SubSection "Display"
  Viewport 0 0
  Depth 24
 EndSubSection
EndSection

Section "Screen"
 Identifier "aticonfig-Screen[1]"
 Device "aticonfig-Device[1]"
 Monitor "aticonfig-Monitor[1]"
 DefaultDepth 24
 SubSection "Display"
  Viewport 0 0
  Depth 24
 EndSubSection
EndSection

Section "DRI"
 Mode 0666
EndSection

----------- end of file ------------

adept-updater is also trying to install this !!!

beryl-settings-bindings

it says its upgradable , but upgrading gives error too !!

kari

ProblemType: Crash
Architecture: i386
Date: Sat Mar 3 23:09:21 2007
DistroRelease: Ubuntu 7.04
ExecutablePath: /usr/bin/beryl-settings
InterpreterPath: /usr/bin/python2.5
Package: beryl-settings 0.1.9999.2~0beryl1
ProcCmdline: python /usr/bin/beryl-settings
ProcCwd: /home/kari
ProcEnviron:
 SHELL=/bin/bash
 PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/X11R6/bin
 LANG=en_US.UTF-8
PythonArgs: ['/usr/bin/beryl-settings']
SourcePackage: beryl-settings
Uname: Linux kari-desktop 2.6.20-9-generic #2 SMP Mon Feb 26 03:01:44 UTC 2007 i686 GNU/Linux