Ubuntu
linux-source-2.6.20 package

IDE disks not found

Bug #97325 reported by Anders
This bug report is a duplicate of:  Bug #106931: Unable to detect ITE8212 RAID0 array. Edit Remove
14
Affects Status Importance Assigned to Milestone
linux (Ubuntu)
Incomplete
Undecided
Unassigned
linux-source-2.6.20 (Ubuntu)
Won't Fix
Low
Unassigned

Bug Description

Binary package hint: linux-source-2.6.20

In a bug hidden by Bug #84964, I am now able to boot up (blocked by bug #84964 because I have a SATA disk connected with my ubuntu system on it). I can now boot using the latest kernel (2.6.20.13-*), 84964 is fixed, BUT the boot fails when checking disks and drops out to a root shell saying it can't find disk by uuid and suggests running fsck. fsck fails as the 2 IDE disks connected to the motherboard's IDE controller are not found.

My motherboard is a Gigabyte GA-965P-DS3

Revision history for this message
Anders (andersja+launchpad-net) wrote :

I should add that this is something that has happened between 2.6.20-6 and 2.6.20-13, as I had a fully functional system running Feisty beta until Bug #84964 came about

Revision history for this message
sam tygier (samtygier) wrote :

can you attach your /etc/fstab

Changed in linux-source-2.6.20:
status: Unconfirmed → Needs Info
Revision history for this message
Tim Gardner (timg-tpi) wrote :

Keep a watch on #97179 as I think it is closely related, if not a duplicate. Same motherboard, slightly different symptoms.

Changed in linux-source-2.6.20:
assignee: nobody → timg-tpi
Revision history for this message
Anders (andersja+launchpad-net) wrote :

I tried to reconnect my IDE hard drives to a separate IDE / RAID PCI controller card to no avail; system still behaving bizarrely

Attached is the rather bizarre sight when booting: "apt-get" is not installed, you can install it by typing apt-get install apt-get ??!!

Revision history for this message
Anders (andersja+launchpad-net) wrote :

/etc/fstab attached as requested

Revision history for this message
Anders (andersja+launchpad-net) wrote :
Changed in linux-source-2.6.20:
status: Needs Info → Confirmed
Revision history for this message
Anders (andersja+launchpad-net) wrote :

Found some workarounds / indicators in the forums and got the PC up by doing Ctrl+D:

http://ubuntuforums.org/showthread.php?t=388705&highlight=drive-by-uuid

attaching fstab files for further assistance

Revision history for this message
Anders (andersja+launchpad-net) wrote :
Revision history for this message
Anders (andersja+launchpad-net) wrote :

appears fsck can't find one of the partitions (but it's there, according to the screenshot above?)

fsck.ext3: Unable to resolve 'UUID=d4f96ce8-db6f-4cb3-b8b0-d91993e44225'

Revision history for this message
Anders (andersja+launchpad-net) wrote :
Revision history for this message
Anders (andersja+launchpad-net) wrote :

As we have seen from ls /dev/disk/by-uuid/ -alh the disk is there. GNOME also finds is and allows GUI-based mounting of the disk. Any clues here why the boot fails so spectacularly?

Revision history for this message
Anders (andersja+launchpad-net) wrote :
Revision history for this message
Tim Gardner (timg-tpi) wrote :

This problem has to do with the JMicron controller on your motherboard. Get the daily ISO on Monday Apr 2 from http://cdimage.ubuntu.com/daily-live/current which will contain lib-ata fixes, boot from the CD and make sure all of your drives appear. If so, then we'll proceed from there.

Changed in linux-source-2.6.20:
assignee: timg-tpi → ubuntu-kernel-team
importance: Undecided → Low
Revision history for this message
Anders (andersja+launchpad-net) wrote :

I upgraded the kernel to 2.6.20-14.* and can confirm that this was a REGRESSION over 2.6.20-13:

On 2.6.20-13, I do get the fsck failure at boot, but continuing the boot without fsck'ing works: one of my 2 IDE disks gets automounted (it contains my /home, so fairly essential), the other is shown in the side panel of the GNOME file manager as "297 Gb Hard drive" and I can mount it to /media/disk by doubleclicking on it and entering my password. This is - needless to say - a hassle but acceptable: the disk is working but is not mounted to where I want it and where I have spesified it in fstab (I want it as /media/shared-files )

On 2.6.20-14 neither IDE disk is recognized at boot, causing the fsck failure at boot and when the login manager comes up, it gives me a warning that /home/{username} is not available and suggests I rectify it.

The two IDE disks are connected as master/slave on one of two ports on a PCI IDE controller card. As they work in 2.6.20-13 (with a bit of fiddling for the second disk) I assume the problem is not with this controller....?

I assume this is a regerssion in 2.6.20-14 over 2.6.20-13? Please let me know any additional info I can submit to help fix this issue?

Revision history for this message
Tim Gardner (timg-tpi) wrote :

Can you just boot from a recent Live CD with a 2.6.20-14 kernel and attach the output of dmesg and 'lspci -vvn'. Lets make the kernel can at least correctly detect your disk drive configuration.

Revision history for this message
Anders (andersja+launchpad-net) wrote :
Download full text (12.4 KiB)

Reshuffled the IDE cables on the IT8212 card: 1 disk per cable (no longer master/slave). PC boots up on 2.6.20-14, one disk is still undetected.

dmesg attached.

andersja@plasken:~$ lspci -vvn
00:00.0 0600: 8086:29a0 (rev 02)
        Subsystem: 1458:5000
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
        Latency: 0
        Capabilities: <access denied>

00:01.0 0604: 8086:29a1 (rev 02) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 0, Cache Line Size: 32 bytes
        Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
        I/O behind bridge: 00006000-00006fff
        Memory behind bridge: f4000000-f6ffffff
        Prefetchable memory behind bridge: 00000000e0000000-00000000efffffff
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
        BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
        Capabilities: <access denied>

00:1a.0 0c03: 8086:2834 (rev 02) (prog-if 00 [UHCI])
        Subsystem: 1458:5004
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Interrupt: pin A routed to IRQ 16
        Region 4: I/O ports at d000 [size=32]

00:1a.1 0c03: 8086:2835 (rev 02) (prog-if 00 [UHCI])
        Subsystem: 1458:5004
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Interrupt: pin B routed to IRQ 20
        Region 4: I/O ports at c000 [size=32]

00:1a.7 0c03: 8086:283a (rev 02) (prog-if 20 [EHCI])
        Subsystem: 1458:5006
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Interrupt: pin C routed to IRQ 18
        Region 0: Memory at fa105000 (32-bit, non-prefetchable) [size=1K]
        Capabilities: <access denied>

00:1b.0 0403: 8086:284b (rev 02)
        Subsystem: 1458:a002
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 0, Cache Line Size: 32 bytes
        Interrupt: pin A routed to IRQ 22
        Region 0: Memory at fa100000 (64-bit, non-prefetchable) [size=16K]
        Capabilities: <access denied>

00:1c.0 0604: 8086:283f (rev 02) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
        Status: Cap+ 66MHz- UDF- F...

Revision history for this message
Anders (andersja+launchpad-net) wrote :
Download full text (12.4 KiB)

Here is the output from booting the live CD image from 10 April ( http://cdimage.ubuntu.com/daily-live/20070410/ )

dmesg attached, lspci -vvn below:

ubuntu@ubuntu:~$ lspci -vvn
00:00.0 0600: 8086:29a0 (rev 02)
        Subsystem: 1458:5000
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
        Latency: 0
        Capabilities: <access denied>

00:01.0 0604: 8086:29a1 (rev 02) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 0, Cache Line Size: 32 bytes
        Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
        I/O behind bridge: 00006000-00006fff
        Memory behind bridge: f4000000-f6ffffff
        Prefetchable memory behind bridge: 00000000e0000000-00000000efffffff
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
        BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
        Capabilities: <access denied>

00:1a.0 0c03: 8086:2834 (rev 02) (prog-if 00 [UHCI])
        Subsystem: 1458:5004
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Interrupt: pin A routed to IRQ 16
        Region 4: I/O ports at d000 [size=32]

00:1a.1 0c03: 8086:2835 (rev 02) (prog-if 00 [UHCI])
        Subsystem: 1458:5004
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Interrupt: pin B routed to IRQ 18
        Region 4: I/O ports at c000 [size=32]

00:1a.7 0c03: 8086:283a (rev 02) (prog-if 20 [EHCI])
        Subsystem: 1458:5006
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Interrupt: pin C routed to IRQ 20
        Region 0: Memory at fa105000 (32-bit, non-prefetchable) [size=1K]
        Capabilities: <access denied>

00:1b.0 0403: 8086:284b (rev 02)
        Subsystem: 1458:a002
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 0, Cache Line Size: 32 bytes
        Interrupt: pin A routed to IRQ 22
        Region 0: Memory at fa100000 (64-bit, non-prefetchable) [size=16K]
        Capabilities: <access denied>

00:1c.0 0604: 8086:283f (rev 02) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParEr...

Revision history for this message
Id2ndR (id2ndr) wrote :
Download full text (27.6 KiB)

I've got an computer which only support IDE hdd (no SATA). Linux kernel 2.6.17 works with it but, upgrading to feisty this morning, 2.6.20-14 doesn't.
The output show that linux detects 2 ata controler but recognise only cdrom devices attached to the second one. I tried to connect hdd to the second ata port but it doesn't work better.

Linux image 2.6.20-2 with is on a old daily live cd seems to recognize hdd but I can download the packet anymore on archive.ubuntu.com.

I copy bellow output of dmesg and lspci -vvn :with old kernel image :

[17179569.184000] Linux version 2.6.17-11-generic (root@terranova) (gcc version 4.1.2 20060928 (prerelease) (Ubuntu 4.1.1-13ubuntu5)) #2 SMP Tue Mar 13 23:32:38 UTC 2007 (Ubuntu 2.6.17-11.37-generic)
[17179569.184000] BIOS-provided physical RAM map:
[17179569.184000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[17179569.184000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[17179569.184000] BIOS-e820: 00000000000d2000 - 00000000000d8006 (reserved)
[17179569.184000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[17179569.184000] BIOS-e820: 0000000000100000 - 000000002fff0000 (usable)
[17179569.184000] BIOS-e820: 000000002fff0000 - 000000002fff8000 (ACPI data)
[17179569.184000] BIOS-e820: 000000002fff8000 - 0000000030000000 (ACPI NVS)
[17179569.184000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[17179569.184000] BIOS-e820: 00000000fed00000 - 00000000fed01000 (reserved)
[17179569.184000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[17179569.184000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[17179569.184000] 0MB HIGHMEM available.
[17179569.184000] 767MB LOWMEM available.
[17179569.184000] On node 0 totalpages: 196592
[17179569.184000] DMA zone: 4096 pages, LIFO batch:0
[17179569.184000] Normal zone: 192496 pages, LIFO batch:31
[17179569.184000] DMI 2.3 present.
[17179569.184000] ACPI: RSDP (v000 AMI ) @ 0x000fa6e0
[17179569.184000] ACPI: RSDT (v001 HP-BDD HPBDD-JH 0x00000010 MSFT 0x00000097) @ 0x2fff0000
[17179569.184000] ACPI: FADT (v001 HP-BDD HPBDD-JH 0x00000011 MSFT 0x00000097) @ 0x2fff0030
[17179569.184000] ACPI: MADT (v001 HP-BDD HPBDD-JH 0x00000001 MSFT 0x00000097) @ 0x2fff00c0
[17179569.184000] ACPI: DSDT (v001 HP-BDD HPBDD-JH 0x00000001 MSFT 0x0100000d) @ 0x00000000
[17179569.184000] ACPI: PM-Timer IO Port: 0x808
[17179569.184000] ACPI: Local APIC address 0xfee00000
[17179569.184000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[17179569.184000] Processor #0 15:2 APIC version 20
[17179569.184000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[17179569.184000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[17179569.184000] ACPI: IRQ0 used by override.
[17179569.184000] ACPI: IRQ2 used by override.
[17179569.184000] ACPI: IRQ9 used by override.
[17179569.184000] Enabling APIC mode: Flat. Using 1 I/O APICs
[17179569.184000] Using ACPI (MADT) for SMP configuration information
[17179569.18400...

Revision history for this message
Anders (andersja+launchpad-net) wrote :
Download full text (4.0 KiB)

Interesting (possible indicative?) lines in dmesg related to it821x:

[ 85.605560] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
[ 85.605563] apm: disabled - APM is not SMP safe.
[ 85.973492] it821x: can't process command 0xE5
[ 85.973514] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 85.973521] ata1.00: cmd e5/00:00:00:00:00/00:00:00:00:00/00 tag 0 cdb 0x0 data 0
[ 85.973522] res 50/00:01:01:00:00/00:00:00:00:00/00 Emask 0x80 (invalid argument)
[ 85.979772] ata1.00: configured for PIO
[ 85.979779] ata1: EH complete
[ 85.979806] SCSI device sda: 625142448 512-byte hdwr sectors (320073 MB)
[ 85.979816] sda: Write Protect is off
[ 85.979819] sda: Mode Sense: 00 3a 00 00
[ 85.979835] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 85.980694] it821x: can't process command 0x98
[ 85.980710] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 85.980715] ata1.00: cmd 98/01:00:00:00:00/00:00:00:00:00/00 tag 0 cdb 0x0 data 0
[ 85.980716] res 50/00:01:01:00:00/00:00:00:00:00/00 Emask 0x80 (invalid argument)
[ 85.987812] ata1.00: configured for PIO
[ 85.987818] ata1: EH complete
[ 85.988467] it821x: can't process command 0xB0
[ 85.988488] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 85.988493] ata1.00: cmd b0/d8:00:00:4f:c2/00:00:00:00:00/00 tag 0 cdb 0x0 data 0
[ 85.988495] res 50/00:01:01:00:00/00:00:00:00:00/00 Emask 0x80 (invalid argument)
[ 85.995914] ata1.00: configured for PIO
[ 85.995921] ata1: EH complete
[ 85.995932] SCSI device sda: 625142448 512-byte hdwr sectors (320073 MB)
[ 85.995942] sda: Write Protect is off
[ 85.995944] sda: Mode Sense: 00 3a 00 00
[ 85.995958] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 85.995973] SCSI device sda: 625142448 512-byte hdwr sectors (320073 MB)
[ 85.995981] sda: Write Protect is off
[ 85.995983] sda: Mode Sense: 00 3a 00 00
[ 85.995996] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 86.021418] it821x: can't process command 0xE5
[ 86.021440] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 86.021445] ata2.00: cmd e5/00:00:00:00:00/00:00:00:00:00/00 tag 0 cdb 0x0 data 0
[ 86.021447] res 50/00:01:01:00:00/00:00:00:00:00/00 Emask 0x80 (invalid argument)
[ 86.027846] ata2.00: configured for PIO
[ 86.027853] ata2: EH complete
[ 86.035625] SCSI device sdb: 625142448 512-byte hdwr sectors (320073 MB)
[ 86.039603] sdb: Write Protect is off
[ 86.039605] sdb: Mode Sense: 00 3a 00 00
[ 86.047594] SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 86.114796] it821x: can't process command 0x98
[ 86.114813] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 86.114818] ata2.00: cmd 98/01:00:00:00:00/00:00:00:00:00/00 tag 0 cdb 0x0 data 0
[ 86.114819] res 50/00:01:01:00:00/00:00:00:00:00/00 Emask 0x80 (invalid argument)
[ 86.119772] ata2.00: configured for PIO
[ 86.119778] ata2: EH complete
[ 86.120002] it821x: can't process command 0xB0
[ 86.1...

Read more...

Revision history for this message
Olaf Leidinger (leidola) wrote :

(Maybe) same problem here.

On linux-image >= 2.6.20.14 my IDE disk is recognized as SCSI/SATA disk and therefore the device isn't hda? but sda?.

The IDE interface is : Advanced Micro Devices [AMD] AMD-768 [Opus] IDE (rev 04) (prog-if 8a [Master SecP PriP])

Ciao,
Olaf

Revision history for this message
Olaf Leidinger (leidola) wrote :

Oh, I'm sorry... seems to be fixed for me with the latest version of 2.6.20.15.

Ciao,
Olaf

Revision history for this message
Id2ndR (id2ndr) wrote :

Hi,

I think this bug is *major* whereas its importance is currently set to low.
In fact I downloaded and burn iso image of feisty. I just tried it one an older computer with IDE only CdRom and HDD and it doesn't start at all : I can see a busybok because kinit is not able to mount cdrom (root file system) !

Revision history for this message
Anders (andersja+launchpad-net) wrote :

I found the solution for my problem, at least: somewhere in the incremental changes in the 2.6.20.* kernels, the method of determining uuid must have changed: my fstab contained an *almost* identical fstab to what the latest kernels identified the disk as (see screenshot of Gnome disk properties and fstab extract

I changed the fstab with the new uuid and the reboot worked fine!

Revision history for this message
Id2ndR (id2ndr) wrote :

I fix the problem of my comment of 2007-04-13. This is https://bugs.launchpad.net/ubuntu/+source/linux-source-2.6.20/+bug/106864/comments/13
I now can use this computer.

One my older computer (my comment of 2007-04-19), where no older kernle is install, I can't boot the liveCD because I can't load piix as my usb keyboard is not detected before busybox appears. But I don't require to use Ubuntu on this computer, it's just a test.

So if other people can fix trouble by loading piix (see link before), this bug is a duplicate of #106864 one.

Revision history for this message
Anders (andersja+launchpad-net) wrote :

I just upgraded to Hardy Heron (Linux kernel 2.6.24) and the same problem is replicated: system boots but fsck complains about certain disks referenced in /etc/fstab (by uuid) are missing: spesifically the 2 disks on the IT8212 IDE controller (that were also disappearing when I reported this bug earlier).

Fsck dies with exit status 9.

Changed in linux-source-2.6.24:
assignee: nobody → ubuntu-kernel-team
Revision history for this message
Leann Ogasawara (leannogasawara) wrote :

Hi Anders,

Can you attach your dmesg output for the newer kernel? Thanks.

Changed in linux:
status: New → Incomplete
Revision history for this message
Leann Ogasawara (leannogasawara) wrote :

A task against the actively developed kernel has been opened so we are closing the task against linux-source-2.6.20. Thanks!

Changed in linux-source-2.6.20:
status: Confirmed → Won't Fix
Revision history for this message
Anders (andersja+launchpad-net) wrote :

Leann/All, to avoid confusing the issue I have raised a new bug and included the information I believe you require:

Please check out Bug #182949 , "IDE disks not found by linux 2.6.24 (but are working fine in gutsy)"

Revision history for this message
Launchpad Janitor (janitor) wrote : Kernel team bugs

Per a decision made by the Ubuntu Kernel Team, bugs will longer be assigned to the ubuntu-kernel-team in Launchpad as part of the bug triage process. The ubuntu-kernel-team is being unassigned from this bug report. Refer to https://wiki.ubuntu.com/KernelTeamBugPolicies for more information. Thanks.

To post a comment you must log in.
This report contains Public information  
Everyone can see this information.
Subscribing...

Other bug subscribers

Remote bug watches

Bug watches keep track of this bug in other bug trackers.