Bug #98574 “No sound in Toshiba P105-S6147 laptop” : Bugs : linux-source-2.6.20 package : Ubuntu

Revision history for this message

Brian Murray (brian-murray) wrote on 2007-03-29: Re: [Bug 98574] No sound in Toshiba P105-S6147 laptop

#1

Thanks for taking the time to report this bug and helping to make Ubuntu
better. Could you please add the output requested at
https://help.ubuntu.com/community/DebuggingSoundProblems ? Thanks in
advance.

status needsinfo
assignee <email address hidden>

Revision history for this message

Tom Ainsworth (kittiluver) wrote on 2007-03-30: Re: [Bug 98547]No sound in Toshiba P105-S6147 laptop

#2

1) tail -2 /proc/asound/oss/sndstat

Mixers:

0: Conexant CX20549 (Venice)

Revision history for this message

Tom Ainsworth (kittiluver) wrote on 2007-03-30:

#3

2) amixer

Simple mixer control 'Master',0

Capabilities: pvolume pswitch pswitch-joined

Playback channels: Front Left - Front Right

Limits: Playback 0 - 43

Mono:

Front Left: Playback 35 [81%] [on]

Front Right: Playback 35 [81%] [on]

Simple mixer control 'PCM',0

Capabilities: pvolume

Playback channels: Front Left - Front Right

Limits: Playback 0 - 255

Mono:

Front Left: Playback 255 [100%] [0.00dB]

Front Right: Playback 255 [100%] [0.00dB]

Simple mixer control 'LineIn',0

Capabilities: cswitch cswitch-joined cswitch-exclusive

Capture exclusive group: 0

Capture channels: Mono

Mono: Capture [off]

Simple mixer control 'IEC958',0

Capabilities: pswitch pswitch-joined

Playback channels: Mono

Mono: Playback [on]

Simple mixer control 'Ext Mic',0

Capabilities: volume pswitch

Playback channels: Front Left - Front Right

Capture channels: Front Left - Front Right

Limits: 0 - 23

Front Left: 0 [0%] [0.00dB] Playback [on]

Front Right: 0 [0%] [0.00dB] Playback [on]

Simple mixer control 'Int Mic',0

Capabilities: volume pswitch

Playback channels: Front Left - Front Right

Capture channels: Front Left - Front Right

Limits: 0 - 23

Front Left: 0 [0%] [0.00dB] Playback [on]

Front Right: 0 [0%] [0.00dB] Playback [on]

Simple mixer control 'IntMic',0

Capabilities: cswitch cswitch-joined cswitch-exclusive

Capture exclusive group: 0

Capture channels: Mono

Mono: Capture [on]

Revision history for this message

Tom Ainsworth (kittiluver) wrote on 2007-03-30: Re: [98547]No sound in Toshiba P105-S6147 laptop

#4

Download full text (5.4 KiB)

3) lspci -nv

00:00.0 0600: 8086:27a0 (rev 03)

Subsystem: 1179:ff31

Flags: bus master, fast devsel, latency 0

Capabilities: <access denied>

00:02.0 0300: 8086:27a2 (rev 03) (prog-if 00 [VGA])

Subsystem: 1179:ff31

Flags: bus master, fast devsel, latency 0, IRQ 17

Memory at d0200000 (32-bit, non-prefetchable) [size=512K]

I/O ports at 1800 [size=8]

Memory at c0000000 (32-bit, prefetchable) [size=256M]

Memory at d0300000 (32-bit, non-prefetchable) [size=256K]

Capabilities: <access denied>

00:02.1 0380: 8086:27a6 (rev 03)

Subsystem: 1179:ff31

Flags: bus master, fast devsel, latency 0

Memory at d0280000 (32-bit, non-prefetchable) [size=512K]

Capabilities: <access denied>

00:1b.0 0403: 8086:27d8 (rev 02)

Subsystem: 1179:ff31

Flags: bus master, fast devsel, latency 0, IRQ 22

Memory at d0340000 (64-bit, non-prefetchable) [size=16K]

Capabilities: <access denied>

00:1c.0 0604: 8086:27d0 (rev 02) (prog-if 00 [Normal decode])

Flags: bus master, fast devsel, latency 0

Bus: primary=00, secondary=02, subordinate=02, sec-latency=0

Capabilities: <access denied>

00:1c.1 0604: 8086:27d2 (rev 02) (prog-if 00 [Normal decode])

Flags: bus master, fast devsel, latency 0

Bus: primary=00, secondary=03, subordinate=03, sec-latency=0

Memory behind bridge: 54000000-540fffff

Capabilities: <access denied>

00:1c.2 0604: 8086:27d4 (rev 02) (prog-if 00 [Normal decode])

Flags: bus master, fast devsel, latency 0

Bus: primary=00, secondary=04, subordinate=04, sec-latency=0

Capabilities: <access denied>

00:1d.0 0c03: 8086:27c8 (rev 02) (prog-if 00 [UHCI])

Subsystem: 1179:ff31

Flags: bus master, medium devsel, latency 0, IRQ 19

I/O ports at 1820 [size=32]

00:1d.1 0c03: 8086:27c9 (rev 02) (prog-if 00 [UHCI])

Subsystem: 1179:ff31

Flags: bus master, medium devsel, latency 0, IRQ 20

I/O ports at 1840 [size=32]

00:1d.2 0c03: 8086:27ca (rev 02) (prog-if 00 [UHCI])

Subsystem: 1179:ff31

Flags: bus master, medium devsel, latency 0, IRQ 18

I/O ports at 1860 [size=32]

00:1d.3 0c03: 8086:27cb (rev 02) (prog-if 00 [UHCI])

Subsystem: 1179:ff31

Flags: bus master, medium devsel, latency 0, IRQ 17

I/O ports at 1880 [size=32]

00:1d.7 0c03: 8086:27cc (rev 02) (prog-if 20 [EHCI])

Subsystem: 1179:ff31

Flags: bus master, medium devsel, latency 0, IRQ 19

Memory at d0544000 (32-bit, non-prefetchable) [size=1K]

Capabilities: <access denied>

00:1e.0 0604: 8086:2448 (rev e2) (prog-if 01 [Subtractive decode])

Flags: bus master, fast devsel, latency 0

Bus: primary=00, secondary=0a, subordinate=0e, sec-latency=32

I/O behind bridge: 00002000-00002fff

Memory behind bridge: d0100000-d01fffff

Prefetchable memory behind bridge: 0000000050000000-0000000053ffffff

Capabilities: <access denied>

00:1f.0 0601: 8086:27b9 (rev 02)

Su...

3) lspci -nv

00:00.0 0600: 8086:27a0 (rev 03)

Subsystem: 1179:ff31

Flags: bus master, fast devsel, latency 0

Capabilities: <access denied>

00:02.0 0300: 8086:27a2 (rev 03) (prog-if 00 [VGA])

Subsystem: 1179:ff31

Flags: bus master, fast devsel, latency 0, IRQ 17

Memory at d0200000 (32-bit, non-prefetchable) [size=512K]

I/O ports at 1800 [size=8]

Memory at c0000000 (32-bit, prefetchable) [size=256M]

Memory at d0300000 (32-bit, non-prefetchable) [size=256K]

Capabilities: <access denied>

00:02.1 0380: 8086:27a6 (rev 03)

Subsystem: 1179:ff31

Flags: bus master, fast devsel, latency 0

Memory at d0280000 (32-bit, non-prefetchable) [size=512K]

Capabilities: <access denied>

00:1b.0 0403: 8086:27d8 (rev 02)

Subsystem: 1179:ff31

Flags: bus master, fast devsel, latency 0, IRQ 22

Memory at d0340000 (64-bit, non-prefetchable) [size=16K]

Capabilities: <access denied>

00:1c.0 0604: 8086:27d0 (rev 02) (prog-if 00 [Normal decode])

Flags: bus master, fast devsel, latency 0

Bus: primary=00, secondary=02, subordinate=02, sec-latency=0

Capabilities: <access denied>

00:1c.1 0604: 8086:27d2 (rev 02) (prog-if 00 [Normal decode])

Flags: bus master, fast devsel, latency 0

Bus: primary=00, secondary=03, subordinate=03, sec-latency=0

Memory behind bridge: 54000000-540fffff

Capabilities: <access denied>

00:1c.2 0604: 8086:27d4 (rev 02) (prog-if 00 [Normal decode])

Flags: bus master, fast devsel, latency 0

Bus: primary=00, secondary=04, subordinate=04, sec-latency=0

Capabilities: <access denied>

00:1d.0 0c03: 8086:27c8 (rev 02) (prog-if 00 [UHCI])

Subsystem: 1179:ff31

Flags: bus master, medium devsel, latency 0, IRQ 19

I/O ports at 1820 [size=32]

00:1d.1 0c03: 8086:27c9 (rev 02) (prog-if 00 [UHCI])

Subsystem: 1179:ff31

Flags: bus master, medium devsel, latency 0, IRQ 20

I/O ports at 1840 [size=32]

00:1d.2 0c03: 8086:27ca (rev 02) (prog-if 00 [UHCI])

Subsystem: 1179:ff31

Flags: bus master, medium devsel, latency 0, IRQ 18

I/O ports at 1860 [size=32]

00:1d.3 0c03: 8086:27cb (rev 02) (prog-if 00 [UHCI])

Subsystem: 1179:ff31

Flags: bus master, medium devsel, latency 0, IRQ 17

I/O ports at 1880 [size=32]

00:1d.7 0c03: 8086:27cc (rev 02) (prog-if 20 [EHCI])

Subsystem: 1179:ff31

Flags: bus master, medium devsel, latency 0, IRQ 19

Memory at d0544000 (32-bit, non-prefetchable) [size=1K]

Capabilities: <access denied>

00:1e.0 0604: 8086:2448 (rev e2) (prog-if 01 [Subtractive decode])

Flags: bus master, fast devsel, latency 0

Bus: primary=00, secondary=0a, subordinate=0e, sec-latency=32

I/O behind bridge: 00002000-00002fff

Memory behind bridge: d0100000-d01fffff

Prefetchable memory behind bridge: 0000000050000000-0000000053ffffff

Capabilities: <access denied>

00:1f.0 0601: 8086:27b9 (rev 02)

Subsystem: 1179:ff31

Flags: bus master, medium devsel, latency 0

Capabilities: <access denied>

00:1f.2 0101: 8086:27c4 (rev 02) (prog-if 80 [Master])

Subsystem: 1179:ff31

Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 20

I/O ports at 01f0 [size=8]

I/O ports at 03f4 [size=1]

I/O ports at 0170 [size=8]

I/O ports at 0374 [size=1]

I/O ports at 18b0 [size=16]

Capabilities: <access denied>

00:1f.3 0c05: 8086:27da (rev 02)

Subsystem: 1179:ff31

Flags: medium devsel, IRQ 11

I/O ports at 18c0 [size=32]

03:00.0 0200: 168c:001c (rev 01)

Subsystem: 144f:7106

Flags: bus master, fast devsel, latency 0, IRQ 16

Memory at 54000000 (64-bit, non-prefetchable) [size=64K]

Capabilities: <access denied>

0a:04.0 0607: 104c:8039

Subsystem: 1179:ff31

Flags: bus master, medium devsel, latency 168, IRQ 16

Memory at d0100000 (32-bit, non-prefetchable) [size=4K]

Bus: primary=0a, secondary=0b, subordinate=0e, sec-latency=176

Memory window 0: 50000000-53fff000 (prefetchable)

Memory window 1: 58000000-5bfff000

I/O window 0: 00002400-000024ff

I/O window 1: 00002800-000028ff

16-bit legacy interface ports at 0001

0a:04.1 0c00: 104c:803a (prog-if 10 [OHCI])

Subsystem: 1179:ff31

Flags: bus master, medium devsel, latency 64, IRQ 16

Memory at d0103000 (32-bit, non-prefetchable) [size=2K]

Memory at d0104000 (32-bit, non-prefetchable) [size=16K]

Capabilities: <access denied>

0a:04.2 0180: 104c:803b

Subsystem: 1179:ff31

Flags: bus master, medium devsel, latency 64, IRQ 16

Memory at d0101000 (32-bit, non-prefetchable) [size=4K]

Capabilities: <access denied>

0a:04.3 0805: 104c:803c (prog-if 01)

Subsystem: 1179:ff31

Flags: bus master, medium devsel, latency 64, IRQ 16

Memory at d0103800 (32-bit, non-prefetchable) [size=256]

Capabilities: <access denied>

0a:08.0 0200: 8086:1092 (rev 02)

Subsystem: 1179:ff31

Flags: bus master, medium devsel, latency 64, IRQ 21

Memory at d0102000 (32-bit, non-prefetchable) [size=4K]

I/O ports at 2000 [size=64]

Revision history for this message

Tom Ainsworth (kittiluver) wrote on 2007-03-30: Re: [Bug 98574]No sound in Toshiba P105-S6147 laptop

#5

4) asoundconf list

0 [Intel ]: HDA-Intel - HDA Intel

HDA Intel at 0xd0340000 irq 22

Revision history for this message

Tom Ainsworth (kittiluver) wrote on 2007-03-30:

#6

5) cat /etc/asound.conf ~/.asoundrc*

cat: /etc/asound.conf: No such file or directory

cat: /home/tom/.asoundrc*: No such file or directory

Revision history for this message

Tom Ainsworth (kittiluver) wrote on 2007-03-30:

#7

Download full text (30.8 KiB)

6) dmesg

[ 0.000000] 896MB LOWMEM available.

[ 0.000000] found SMP MP-table at 000f7690

[ 0.000000] Entering add_active_range(0, 0, 259728) 0 entries of 256 used

[ 0.000000] Zone PFN ranges:

[ 0.000000] DMA 0 -> 4096

[ 0.000000] Normal 4096 -> 229376

[ 0.000000] HighMem 229376 -> 259728

[ 0.000000] early_node_map[1] active PFN ranges

[ 0.000000] 0: 0 -> 259728

[ 0.000000] On node 0 totalpages: 259728

[ 0.000000] DMA zone: 32 pages used for memmap

[ 0.000000] DMA zone: 0 pages reserved

[ 0.000000] DMA zone: 4064 pages, LIFO batch:0

[ 0.000000] Normal zone: 1760 pages used for memmap

[ 0.000000] Normal zone: 223520 pages, LIFO batch:31

[ 0.000000] HighMem zone: 237 pages used for memmap

[ 0.000000] HighMem zone: 30115 pages, LIFO batch:7

[ 0.000000] DMI present.

[ 0.000000] ACPI: RSDP (v002 TOSQCI ) @ 0x000f75d0

[ 0.000000] ACPI: XSDT (v001 TOSQCI TOSQCI00 0x06040000 LTP 0x00000000) @ 0x3f692072

[ 0.000000] ACPI: FADT (v003 TOSQCI TOSQCI00 0x06040000 ALAN 0x00000001) @ 0x3f69bc2a

[ 0.000000] ACPI: MADT (v001 TOSQCI TOSQCI00 0x06040000 LOHR 0x0000005a) @ 0x3f69bd1e

[ 0.000000] ACPI: HPET (v001 TOSQCI TOSQCI00 0x06040000 LOHR 0x0000005a) @ 0x3f69bd86

[ 0.000000] ACPI: MCFG (v001 TOSQCI TOSQCI00 0x06040000 LOHR 0x0000005a) @ 0x3f69bdbe

[ 0.000000] ACPI: MADT (v001 PTLTD APIC 0x06040000 LTP 0x00000000) @ 0x3f69bdfa

[ 0.000000] ACPI: BOOT (v001 PTLTD $SBFTBL$ 0x06040000 LTP 0x00000001) @ 0x3f69be62

[ 0.000000] ACPI: SLIC (v001 TOSQCI TOSQCI00 0x06040000 LTP 0x00000000) @ 0x3f69be8a

[ 0.000000] ACPI: SSDT (v001 PmRef Cpu0Tst 0x00003000 INTL 0x20060912) @ 0x3f692672

[ 0.000000] ACPI: SSDT (v001 PmRef Cpu1Tst 0x00003000 INTL 0x20060912) @ 0x3f6925cc

[ 0.000000] ACPI: SSDT (v001 PmRef CpuPm 0x00003000 INTL 0x20060912) @ 0x3f6920e6

[ 0.000000] ACPI: DSDT (v001 TOSQCI Denver 0x06040000 MSFT 0x03000001) @ 0x00000000

[ 0.000000] ACPI: PM-Timer IO Port: 0x1008

[ 0.000000] ACPI: Local APIC address 0xfee00000

[ 0.000000] ACPI: 2 duplicate APIC table ignored.

[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)

[ 0.000000] Processor #0 6:14 APIC version 20

[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)

[ 0.000000] Processor #1 6:14 APIC version 20

[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])

[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])

[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])

[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23

[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)

[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)

[ 0.000000] ACPI: IRQ0 used by override.

[ 0.000000] ACPI: IRQ2 used by override.

[ 0.000000] ACPI: IRQ9 used by override.

[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs

[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000

[ 0.000000] Using ACPI (MADT) for SMP config...

6) dmesg

[    0.000000] 896MB LOWMEM available.

[    0.000000] found SMP MP-table at 000f7690

[    0.000000] Entering add_active_range(0, 0, 259728) 0 entries of 256 used

[    0.000000] Zone PFN ranges:

[    0.000000]   DMA             0 ->     4096

[    0.000000]   Normal       4096 ->   229376

[    0.000000]   HighMem    229376 ->   259728

[    0.000000] early_node_map[1] active PFN ranges

[    0.000000]     0:        0 ->   259728

[    0.000000] On node 0 totalpages: 259728

[    0.000000]   DMA zone: 32 pages used for memmap

[    0.000000]   DMA zone: 0 pages reserved

[    0.000000]   DMA zone: 4064 pages, LIFO batch:0

[    0.000000]   Normal zone: 1760 pages used for memmap

[    0.000000]   Normal zone: 223520 pages, LIFO batch:31

[    0.000000]   HighMem zone: 237 pages used for memmap

[    0.000000]   HighMem zone: 30115 pages, LIFO batch:7

[    0.000000] DMI present.

[    0.000000] ACPI: RSDP (v002 TOSQCI                                ) @ 0x000f75d0

[    0.000000] ACPI: XSDT (v001 TOSQCI TOSQCI00 0x06040000  LTP 0x00000000) @ 0x3f692072

[    0.000000] ACPI: FADT (v003 TOSQCI TOSQCI00 0x06040000 ALAN 0x00000001) @ 0x3f69bc2a

[    0.000000] ACPI: MADT (v001 TOSQCI TOSQCI00 0x06040000 LOHR 0x0000005a) @ 0x3f69bd1e

[    0.000000] ACPI: HPET (v001 TOSQCI TOSQCI00 0x06040000 LOHR 0x0000005a) @ 0x3f69bd86

[    0.000000] ACPI: MCFG (v001 TOSQCI TOSQCI00 0x06040000 LOHR 0x0000005a) @ 0x3f69bdbe

[    0.000000] ACPI: MADT (v001 PTLTD    APIC   0x06040000  LTP 0x00000000) @ 0x3f69bdfa

[    0.000000] ACPI: BOOT (v001 PTLTD  $SBFTBL$ 0x06040000  LTP 0x00000001) @ 0x3f69be62

[    0.000000] ACPI: SLIC (v001 TOSQCI TOSQCI00 0x06040000  LTP 0x00000000) @ 0x3f69be8a

[    0.000000] ACPI: SSDT (v001  PmRef  Cpu0Tst 0x00003000 INTL 0x20060912) @ 0x3f692672

[    0.000000] ACPI: SSDT (v001  PmRef  Cpu1Tst 0x00003000 INTL 0x20060912) @ 0x3f6925cc

[    0.000000] ACPI: SSDT (v001  PmRef    CpuPm 0x00003000 INTL 0x20060912) @ 0x3f6920e6

[    0.000000] ACPI: DSDT (v001 TOSQCI   Denver 0x06040000 MSFT 0x03000001) @ 0x00000000

[    0.000000] ACPI: PM-Timer IO Port: 0x1008

[    0.000000] ACPI: Local APIC address 0xfee00000

[    0.000000] ACPI: 2 duplicate APIC table ignored.

[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)

[    0.000000] Processor #0 6:14 APIC version 20

[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)

[    0.000000] Processor #1 6:14 APIC version 20

[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])

[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])

[    0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])

[    0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23

[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)

[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)

[    0.000000] ACPI: IRQ0 used by override.

[    0.000000] ACPI: IRQ2 used by override.

[    0.000000] ACPI: IRQ9 used by override.

[    0.000000] Enabling APIC mode:  Flat.  Using 1 I/O APICs

[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000

[    0.000000] Using ACPI (MADT) for SMP configuration information

[    0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000)

[    0.000000] Detected 1600.136 MHz processor.

[   27.868891] Built 1 zonelists.  Total pages: 257699

[   27.868895] Kernel command line: root=UUID=e59a996a-9b00-4c6c-81c4-3fc18d47d2be ro quiet splash

[   27.869063] mapped APIC to ffffd000 (fee00000)

[   27.869065] mapped IOAPIC to ffffc000 (fec00000)

[   27.869069] Enabling fast FPU save and restore... done.

[   27.869071] Enabling unmasked SIMD FPU exception support... done.

[   27.869081] Initializing CPU#0

[   27.869156] PID hash table entries: 4096 (order: 12, 16384 bytes)

[   27.871011] Console: colour VGA+ 80x25

[   27.871301] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)

[   27.871698] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)

[   27.903262] Memory: 1018740k/1038912k available (1992k kernel code, 19428k reserved, 889k data, 328k init, 121408k highmem)

[   27.903272] virtual kernel memory layout:

[   27.903273]     fixmap  : 0xfff4e000 - 0xfffff000   ( 708 kB)

[   27.903275]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)

[   27.903276]     vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)

[   27.903278]     lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)

[   27.903279]       .init : 0xc03d7000 - 0xc0429000   ( 328 kB)

[   27.903280]       .data : 0xc02f2184 - 0xc03d06d4   ( 889 kB)

[   27.903282]       .text : 0xc0100000 - 0xc02f2184   (1992 kB)

[   27.903286] Checking if this processor honours the WP bit even in supervisor mode... Ok.

[   27.903461] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0

[   27.903467] hpet0: 3 64-bit timers, 14318180 Hz

[   27.904472] Using HPET for base-timer

[   27.983343] Calibrating delay using timer specific routine.. 3203.80 BogoMIPS (lpj=6407600)

[   27.983385] Security Framework v1.0.0 initialized

[   27.983393] SELinux:  Disabled at boot.

[   27.983409] Mount-cache hash table entries: 512

[   27.983554] CPU: After generic identify, caps: bfe9fbff 00000000 00000000 00000000 0000c189 00000000 00000000

[   27.983566] monitor/mwait feature present.

[   27.983568] using mwait in idle threads.

[   27.983572] CPU: L1 I cache: 32K, L1 D cache: 32K

[   27.983575] CPU: L2 cache: 1024K

[   27.983578] CPU: Physical Processor ID: 0

[   27.983580] CPU: Processor Core ID: 0

[   27.983582] CPU: After all inits, caps: bfe9fbff 00000000 00000000 00002940 0000c189 00000000 00000000

[   27.983592] Compat vDSO mapped to ffffe000.

[   27.983598] Remapping vsyscall page to ffffe000

[   27.983611] Checking 'hlt' instruction... OK.

[   27.999438] SMP alternatives: switching to UP code

[   27.999837] Early unpacking initramfs... done

[   28.348271] ACPI: Core revision 20060707

[   28.373469] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.

[   28.391129] CPU0: Intel Genuine Intel(R) CPU           T2060  @ 1.60GHz stepping 0c

[   28.391152] SMP alternatives: switching to SMP code

[   28.391290] Booting processor 1/1 eip 3000

[   28.401603] Initializing CPU#1

[   28.478585] Calibrating delay using timer specific routine.. 3200.23 BogoMIPS (lpj=6400474)

[   28.478593] CPU: After generic identify, caps: bfe9fbff 00000000 00000000 00000000 0000c189 00000000 00000000

[   28.478598] monitor/mwait feature present.

[   28.478602] CPU: L1 I cache: 32K, L1 D cache: 32K

[   28.478604] CPU: L2 cache: 1024K

[   28.478606] CPU: Physical Processor ID: 0

[   28.478608] CPU: Processor Core ID: 1

[   28.478609] CPU: After all inits, caps: bfe9fbff 00000000 00000000 00002940 0000c189 00000000 00000000

[   28.478949] CPU1: Intel Genuine Intel(R) CPU           T2060  @ 1.60GHz stepping 0c

[   28.478975] Total of 2 processors activated (6404.03 BogoMIPS).

[   28.479173] ENABLING IO-APIC IRQs

[   28.479385] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1

[   28.626358] checking TSC synchronization across 2 CPUs: passed.

[    0.004000] Brought up 2 CPUs

[    0.108130] migration_cost=68

[    0.108424] Booting paravirtualized kernel on bare hardware

[    0.108531] Time:  5:38:18  Date: 02/30/107

[    0.108563] NET: Registered protocol family 16

[    0.108655] EISA bus registered

[    0.108661] ACPI: bus type pci registered

[    0.133722] PCI: PCI BIOS revision 2.10 entry at 0xfd704, last bus=11

[    0.133724] PCI: Using configuration type 1

[    0.133726] Setting up standard PCI resources

[    0.141050] ACPI: Interpreter enabled

[    0.141053] ACPI: Using IOAPIC for interrupt routing

[    0.141558] ACPI: PCI Root Bridge [PCI0] (0000:00)

[    0.141563] PCI: Probing PCI hardware (bus 00)

[    0.142397] Boot video device is 0000:00:02.0

[    0.143065] PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO

[    0.143070] PCI quirk: region 1180-11bf claimed by ICH6 GPIO

[    0.143971] PCI: Firmware left 0000:0a:08.0 e100 interrupts enabled, disabling

[    0.144069] PCI: Transparent bridge - 0000:00:1e.0

[    0.144144] PCI: Bus #0b (-#0e) is hidden behind transparent bridge #0a (-#0b) (try 'pci=assign-busses')

[    0.144147] Please report the result to linux-kernel to fix this permanently

[    0.144217] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]

[    0.155673] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]

[    0.155969] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]

[    0.156249] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]

[    0.157752] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]

[    0.158395] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11

[    0.158677] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)

[    0.158965] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11

[    0.159244] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15)

[    0.159526] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *11

[    0.159814] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.

[    0.160099] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11

[    0.160380] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 *7 11 12 14 15)

[    0.234301] Linux Plug and Play Support v0.97 (c) Adam Belay

[    0.234312] pnp: PnP ACPI init

[    0.237090] pnp: PnP ACPI: found 9 devices

[    0.237095] PnPBIOS: Disabled by ACPI PNP

[    0.237144] PCI: Using ACPI for IRQ routing

[    0.237147] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report

[    0.237152] PCI: Cannot allocate resource region 7 of bridge 0000:00:1c.0

[    0.237154] PCI: Cannot allocate resource region 8 of bridge 0000:00:1c.0

[    0.237157] PCI: Cannot allocate resource region 9 of bridge 0000:00:1c.0

[    0.237160] PCI: Cannot allocate resource region 7 of bridge 0000:00:1c.1

[    0.237162] PCI: Cannot allocate resource region 8 of bridge 0000:00:1c.1

[    0.237165] PCI: Cannot allocate resource region 9 of bridge 0000:00:1c.1

[    0.237168] PCI: Cannot allocate resource region 7 of bridge 0000:00:1c.2

[    0.237171] PCI: Cannot allocate resource region 8 of bridge 0000:00:1c.2

[    0.237173] PCI: Cannot allocate resource region 9 of bridge 0000:00:1c.2

[    0.269882] NET: Registered protocol family 8

[    0.269884] NET: Registered protocol family 20

[    0.270422] PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0

[    0.270429] PCI: Bridge: 0000:00:1c.0

[    0.270430]   IO window: disabled.

[    0.270436]   MEM window: disabled.

[    0.270441]   PREFETCH window: disabled.

[    0.270457] PCI: Bridge: 0000:00:1c.1

[    0.270459]   IO window: disabled.

[    0.270465]   MEM window: 54000000-540fffff

[    0.270470]   PREFETCH window: disabled.

[    0.270476] PCI: Bridge: 0000:00:1c.2

[    0.270477]   IO window: disabled.

[    0.270483]   MEM window: disabled.

[    0.270488]   PREFETCH window: disabled.

[    0.270497] PCI: Bus 11, cardbus bridge: 0000:0a:04.0

[    0.270499]   IO window: 00002400-000024ff

[    0.270505]   IO window: 00002800-000028ff

[    0.270511]   PREFETCH window: 50000000-53ffffff

[    0.270516]   MEM window: 58000000-5bffffff

[    0.270521] PCI: Bridge: 0000:00:1e.0

[    0.270524]   IO window: 2000-2fff

[    0.270531]   MEM window: d0100000-d01fffff

[    0.270536]   PREFETCH window: 50000000-53ffffff

[    0.270568] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 16

[    0.270576] PCI: Setting latency timer of device 0000:00:1c.0 to 64

[    0.270600] PCI: Enabling device 0000:00:1c.1 (0000 -> 0002)

[    0.270605] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 17

[    0.270613] PCI: Setting latency timer of device 0000:00:1c.1 to 64

[    0.270638] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18

[    0.270646] PCI: Setting latency timer of device 0000:00:1c.2 to 64

[    0.270657] PCI: Enabling device 0000:00:1e.0 (0004 -> 0007)

[    0.270664] PCI: Setting latency timer of device 0000:00:1e.0 to 64

[    0.270681] PCI: Enabling device 0000:0a:04.0 (0000 -> 0003)

[    0.270686] ACPI: PCI Interrupt 0000:0a:04.0[A] -> GSI 17 (level, low) -> IRQ 16

[    0.270695] PCI: Setting latency timer of device 0000:0a:04.0 to 64

[    0.270728] NET: Registered protocol family 2

[    0.319565] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)

[    0.319692] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)

[    0.320482] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)

[    0.320902] TCP: Hash tables configured (established 131072 bind 65536)

[    0.320905] TCP reno registered

[    0.335636] checking if image is initramfs... it is

[    1.025356] Freeing initrd memory: 6779k freed

[    1.025552] Simple Boot Flag at 0x36 set to 0x1

[    1.026065] audit: initializing netlink socket (disabled)

[    1.026082] audit(1175233098.816:1): initialized

[    1.026184] highmem bounce pool size: 64 pages

[    1.026279] VFS: Disk quotas dquot_6.5.1

[    1.026303] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)

[    1.026353] io scheduler noop registered

[    1.026356] io scheduler anticipatory registered

[    1.026358] io scheduler deadline registered

[    1.026371] io scheduler cfq registered (default)

[    9.018062] 0000:00:1d.7 EHCI: BIOS handoff failed (BIOS bug ?) 01010001

[    9.018365] PCI: Setting latency timer of device 0000:00:1c.0 to 64

[    9.018425] assign_interrupt_mode Found MSI capability

[    9.018428] Allocate Port Service[0000:00:1c.0:pcie00]

[    9.018470] Allocate Port Service[0000:00:1c.0:pcie02]

[    9.018596] PCI: Setting latency timer of device 0000:00:1c.1 to 64

[    9.018655] assign_interrupt_mode Found MSI capability

[    9.018658] Allocate Port Service[0000:00:1c.1:pcie00]

[    9.018693] Allocate Port Service[0000:00:1c.1:pcie02]

[    9.018817] PCI: Setting latency timer of device 0000:00:1c.2 to 64

[    9.018876] assign_interrupt_mode Found MSI capability

[    9.018878] Allocate Port Service[0000:00:1c.2:pcie00]

[    9.018915] Allocate Port Service[0000:00:1c.2:pcie02]

[    9.019103] isapnp: Scanning for PnP cards...

[    9.372634] isapnp: No Plug & Play device found

[    9.399342] Real Time Clock Driver v1.12ac

[    9.399408] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled

[    9.400145] mice: PS/2 mouse device common for all mice

[    9.400771] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize

[    9.400947] input: Macintosh mouse button emulation as /class/input/input0

[    9.400985] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2

[    9.400989] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx

[    9.401295] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12

[    9.404457] serio: i8042 KBD port at 0x60,0x64 irq 1

[    9.404464] serio: i8042 AUX port at 0x60,0x64 irq 12

[    9.404592] EISA: Probing bus 0 at eisa.0

[    9.404602] Cannot allocate resource for EISA slot 1

[    9.404606] Cannot allocate resource for EISA slot 2

[    9.404633] EISA: Detected 0 cards.

[    9.434697] TCP cubic registered

[    9.434709] NET: Registered protocol family 1

[    9.434735] Starting balanced_irq

[    9.434742] Using IPI No-Shortcut mode

[    9.434856] ACPI: (supports S0 S3 S4 S5)

[    9.434906]   Magic number: 15:344:619

[    9.434967]   hash matches device ptye9

[    9.434979]   hash matches device ptybc

[    9.435213] Freeing unused kernel memory: 328k freed

[    9.437073] input: AT Translated Set 2 keyboard as /class/input/input1

[    9.437611] Time: tsc clocksource has been installed.

[   10.662113] Capability LSM initialized

[   10.701160] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu0Ist] [20060707]

[   10.701444] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu0Cst] [20060707]

[   10.702103] ACPI: CPU0 (power states: C1[C1] C2[C2])

[   10.702646] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu1Ist] [20060707]

[   10.702876] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu1Cst] [20060707]

[   10.703591] ACPI: CPU1 (power states: C1[C1] C2[C2])

[   11.336000] Time: hpet clocksource has been installed.

[   11.336000] ACPI: Thermal Zone [THRM] (33 C)

[   11.716000] usbcore: registered new interface driver usbfs

[   11.716000] usbcore: registered new interface driver hub

[   11.716000] usbcore: registered new device driver usb

[   11.716000] USB Universal Host Controller Interface driver v3.0

[   11.716000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 19

[   11.716000] PCI: Setting latency timer of device 0000:00:1d.0 to 64

[   11.716000] uhci_hcd 0000:00:1d.0: UHCI Host Controller

[   11.716000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1

[   11.716000] uhci_hcd 0000:00:1d.0: irq 19, io base 0x00001820

[   11.716000] usb usb1: configuration #1 chosen from 1 choice

[   11.716000] hub 1-0:1.0: USB hub found

[   11.716000] hub 1-0:1.0: 2 ports detected

[   11.804000] e100: Intel(R) PRO/100 Network Driver, 3.5.17-k2-NAPI

[   11.812000] SCSI subsystem initialized

[   11.816000] libata version 2.20 loaded.

[   11.820000] ieee1394: Initialized config rom entry `ip1394'

[   11.820000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 20

[   11.820000] PCI: Setting latency timer of device 0000:00:1d.1 to 64

[   11.820000] uhci_hcd 0000:00:1d.1: UHCI Host Controller

[   11.824000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2

[   11.824000] uhci_hcd 0000:00:1d.1: irq 20, io base 0x00001840

[   11.824000] usb usb2: configuration #1 chosen from 1 choice

[   11.824000] hub 2-0:1.0: USB hub found

[   11.824000] hub 2-0:1.0: 2 ports detected

[   11.928000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18

[   11.928000] PCI: Setting latency timer of device 0000:00:1d.2 to 64

[   11.928000] uhci_hcd 0000:00:1d.2: UHCI Host Controller

[   11.928000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3

[   11.928000] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860

[   11.932000] usb usb3: configuration #1 chosen from 1 choice

[   11.932000] hub 3-0:1.0: USB hub found

[   11.932000] hub 3-0:1.0: 2 ports detected

[   12.036000] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 17

[   12.036000] PCI: Setting latency timer of device 0000:00:1d.3 to 64

[   12.036000] uhci_hcd 0000:00:1d.3: UHCI Host Controller

[   12.036000] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4

[   12.036000] uhci_hcd 0000:00:1d.3: irq 17, io base 0x00001880

[   12.040000] usb usb4: configuration #1 chosen from 1 choice

[   12.040000] hub 4-0:1.0: USB hub found

[   12.040000] hub 4-0:1.0: 2 ports detected

[   12.060000] usb 1-1: new full speed USB device using uhci_hcd and address 2

[   12.144000] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 19

[   12.148000] PCI: Setting latency timer of device 0000:00:1d.7 to 64

[   12.148000] ehci_hcd 0000:00:1d.7: EHCI Host Controller

[   12.148000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5

[   12.148000] ehci_hcd 0000:00:1d.7: debug port 1

[   12.148000] PCI: cache line size of 32 is not supported by device 0000:00:1d.7

[   12.148000] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xd0544000

[   12.152000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004

[   12.152000] usb usb5: configuration #1 chosen from 1 choice

[   12.152000] hub 5-0:1.0: USB hub found

[   12.152000] hub 5-0:1.0: 8 ports detected

[   12.260000] ACPI: PCI Interrupt 0000:0a:08.0[A] -> GSI 20 (level, low) -> IRQ 21

[   12.260000] PCI: Setting latency timer of device 0000:0a:08.0 to 64

[   12.284000] e100: eth0: e100_probe: addr 0xd0102000, irq 21, MAC addr 00:16:36:C9:10:19

[   12.284000] PCI: Enabling device 0000:0a:04.1 (0000 -> 0002)

[   12.284000] ACPI: PCI Interrupt 0000:0a:04.1[A] -> GSI 17 (level, low) -> IRQ 16

[   12.284000] PCI: Setting latency timer of device 0000:0a:04.1 to 64

[   12.336000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[16]  MMIO=[d0103000-d01037ff]  Max Packet=[2048]  IR/IT contexts=[4/8]

[   12.336000] ata_piix 0000:00:1f.2: version 2.10ac1

[   12.336000] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]

[   12.492000] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 20

[   12.492000] PCI: Setting latency timer of device 0000:00:1f.2 to 64

[   12.492000] ata1: SATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x000118b0 irq 14

[   12.492000] ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x000118b8 irq 15

[   12.492000] scsi0 : ata_piix

[   12.596000] usb 1-1: device not accepting address 2, error -71

[   12.676000] ata1.00: ATA-7: TOSHIBA MK1234GSX, AH001A, max UDMA/100

[   12.676000] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 0/32)

[   12.696000] ata1.00: configured for UDMA/100

[   12.696000] scsi1 : ata_piix

[   12.892000] usb 5-1: new high speed USB device using ehci_hcd and address 2

[   13.020000] ata2.00: ATAPI, max UDMA/33

[   13.028000] usb 5-1: configuration #1 chosen from 1 choice

[   13.028000] hub 5-1:1.0: USB hub found

[   13.028000] hub 5-1:1.0: 4 ports detected

[   13.188000] ata2.00: configured for UDMA/33

[   13.188000] scsi 0:0:0:0: Direct-Access     ATA      TOSHIBA MK1234GS AH00 PQ: 0 ANSI: 5

[   13.188000] scsi 1:0:0:0: CD-ROM            MATSHITA DVD-RAM UJ-850S  1.10 PQ: 0 ANSI: 5

[   13.204000] SCSI device sda: 234441648 512-byte hdwr sectors (120034 MB)

[   13.204000] sda: Write Protect is off

[   13.204000] sda: Mode Sense: 00 3a 00 00

[   13.204000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA

[   13.204000] SCSI device sda: 234441648 512-byte hdwr sectors (120034 MB)

[   13.204000] sda: Write Protect is off

[   13.204000] sda: Mode Sense: 00 3a 00 00

[   13.204000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA

[   13.204000]  sda: sda1 sda2 sda3 < sda5 sda6 >

[   13.268000] sd 0:0:0:0: Attached scsi disk sda

[   13.272000] sd 0:0:0:0: Attached scsi generic sg0 type 0

[   13.272000] sr 1:0:0:0: Attached scsi generic sg1 type 5

[   13.276000] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray

[   13.276000] Uniform CD-ROM driver Revision: 3.20

[   13.276000] sr 1:0:0:0: Attached scsi CD-ROM sr0

[   13.336000] usb 5-1.2: new full speed USB device using ehci_hcd and address 3

[   13.440000] usb 5-1.2: configuration #1 chosen from 1 choice

[   13.536000] Attempting manual resume

[   13.536000] swsusp: Resume From Partition 8:6

[   13.536000] PM: Checking swsusp image.

[   13.536000] PM: Resume from disk failed.

[   13.576000] kjournald starting.  Commit interval 5 seconds

[   13.576000] EXT3-fs: mounted filesystem with ordered data mode.

[   13.644000] usb 5-1.3: new low speed USB device using ehci_hcd and address 4

[   13.752000] usb 5-1.3: configuration #1 chosen from 1 choice

[   25.496000] e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex

[   26.568000] intel_rng: FWH not detected

[   26.636000] iTCO_vendor_support: vendor-support=0

[   26.648000] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (11-Nov-2006)

[   26.648000] iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x1060)

[   26.648000] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)

[   26.852000] NET: Registered protocol family 17

[   26.864000] Linux agpgart interface v0.102 (c) Dave Jones

[   26.868000] agpgart: Detected an Intel 945GM Chipset.

[   26.868000] agpgart: Detected 7932K stolen memory.

[   26.884000] agpgart: AGP aperture is 256M @ 0xc0000000

[   26.904000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5

[   26.908000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4

[   26.960000] ath_hal: module license 'Proprietary' taints kernel.

[   26.980000] ath_hal: 0.9.18.0 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)

[   27.020000] sdhci: Secure Digital Host Controller Interface driver

[   27.020000] sdhci: Copyright(c) Pierre Ossman

[   27.020000] sdhci: SDHCI controller found at 0000:0a:04.3 [104c:803c] (rev 0)

[   27.020000] PCI: Enabling device 0000:0a:04.3 (0000 -> 0002)

[   27.020000] ACPI: PCI Interrupt 0000:0a:04.3[A] -> GSI 17 (level, low) -> IRQ 16

[   27.020000] PCI: Setting latency timer of device 0000:0a:04.3 to 64

[   27.020000] mmc0: SDHCI at 0xd0103800 irq 16 DMA

[   27.140000] PCI: Enabling device 0000:0a:04.2 (0000 -> 0002)

[   27.140000] ACPI: PCI Interrupt 0000:0a:04.2[A] -> GSI 17 (level, low) -> IRQ 16

[   27.140000] PCI: Setting latency timer of device 0000:0a:04.2 to 64

[   27.184000] Yenta: CardBus bridge found at 0000:0a:04.0 [1179:ff31]

[   27.184000] Yenta: Using CSCINT to route CSC interrupts to PCI

[   27.184000] Yenta: Routing CardBus interrupts to PCI

[   27.184000] Yenta TI: socket 0000:0a:04.0, mfunc 0x01a21b22, devctl 0x66

[   27.336000] wlan: 0.8.4.2 (0.9.3)

[   27.420000] Yenta: ISA IRQ mask 0x0cf8, PCI irq 16

[   27.420000] Socket status: 30000006

[   27.420000] Yenta: Raising subordinate bus# of parent bus (#0a) from #0b to #0e

[   27.420000] pcmcia: parent PCI bridge I/O window: 0x2000 - 0x2fff

[   27.420000] cs: IO port probe 0x2000-0x2fff: clean.

[   27.420000] pcmcia: parent PCI bridge Memory window: 0xd0100000 - 0xd01fffff

[   27.420000] pcmcia: parent PCI bridge Memory window: 0x50000000 - 0x53ffffff

[   27.456000] ath_pci: 0.9.4.5 (0.9.3)

[   27.456000] PCI: Enabling device 0000:03:00.0 (0000 -> 0002)

[   27.456000] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 16

[   27.456000] PCI: Setting latency timer of device 0000:03:00.0 to 64

[   28.028000] ath_rate_sample: 1.2 (0.9.3)

[   28.028000] wifi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps

[   28.028000] wifi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps

[   28.028000] wifi0: H/W encryption support: WEP AES AES_CCM TKIP

[   28.028000] wifi0: mac 10.0 phy 6.1 radio 10.2

[   28.028000] wifi0: Use hw queue 1 for WME_AC_BE traffic

[   28.028000] wifi0: Use hw queue 0 for WME_AC_BK traffic

[   28.028000] wifi0: Use hw queue 2 for WME_AC_VI traffic

[   28.028000] wifi0: Use hw queue 3 for WME_AC_VO traffic

[   28.028000] wifi0: Use hw queue 8 for CAB traffic

[   28.028000] wifi0: Use hw queue 9 for beacons

[   28.072000] wifi0: Atheros 5424/2424: mem=0x54000000, irq=16

[   28.120000] drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x04B8 pid 0x0005

[   28.120000] usbcore: registered new interface driver usblp

[   28.120000] drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver

[   28.120000] usbcore: registered new interface driver hiddev

[   28.176000] input: Logitech USB-PS/2 Optical Mouse as /class/input/input2

[   28.176000] input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.7-1.3

[   28.176000] usbcore: registered new interface driver usbhid

[   28.176000] drivers/usb/input/hid-core.c: v2.6:USB HID core driver

[   28.304000] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22

[   28.304000] PCI: Setting latency timer of device 0000:00:1b.0 to 64

[   28.416000] cs: IO port probe 0x100-0x3af: clean.

[   28.420000] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7

[   28.420000] cs: IO port probe 0x820-0x8ff: clean.

[   28.420000] cs: IO port probe 0xc00-0xcf7: clean.

[   28.420000] cs: IO port probe 0xa00-0xaff: clean.

[   28.576000] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x25a0b1, caps: 0xa04713/0x0

[   28.576000] synaptics: Toshiba Satellite P105 detected, limiting rate to 40pps.

[   28.612000] input: SynPS/2 Synaptics TouchPad as /class/input/input3

[   28.660000] lp: driver loaded but no devices found

[   28.812000] Adding 1839400k swap on /dev/disk/by-uuid/39913d54-0784-4743-99cf-da7e7fa85c3d.  Priority:-1 extents:1 across:1839400k

[   28.940000] EXT3 FS on sda2, internal journal

[   29.616000] NET: Registered protocol family 10

[   29.616000] lo: Disabled Privacy Extensions

[   29.952000] ACPI: Battery Slot [BAT1] (battery absent)

[   30.072000] input: Power Button (FF) as /class/input/input4

[   30.072000] ACPI: Power Button (FF) [PWRF]

[   30.072000] input: Lid Switch as /class/input/input5

[   30.072000] ACPI: Lid Switch [LID]

[   30.072000] input: Power Button (CM) as /class/input/input6

[   30.072000] ACPI: Power Button (CM) [PWRB]

[   30.092000] Using specific hotkey driver

[   30.212000] ibm_acpi: ec object not found

[   30.268000] ACPI: AC Adapter [ACAD] (on-line)

[   30.280000] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)

[   30.296000] No dock devices found.

[   30.316000] pcc_acpi: loading...

[   30.324000] wmi_add device=c196d800

[   30.324000] calling WQBA

[   30.324000] wmi_add device=c196d400

[   30.324000] calling WQBA

[   36.660000] [drm] Initialized drm 1.1.0 20060810

[   36.660000] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 17

[   36.660000] [drm] Initialized i915 1.6.0 20060119 on minor 0

[   37.184000] ppdev: user-space parallel port driver

[   38.440000] apm: BIOS not found.

[   38.724000] Bluetooth: Core ver 2.11

[   38.724000] NET: Registered protocol family 31

[   38.724000] Bluetooth: HCI device and connection manager initialized

[   38.724000] Bluetooth: HCI socket layer initialized

[   38.756000] Bluetooth: L2CAP ver 2.8

[   38.756000] Bluetooth: L2CAP socket layer initialized

[   38.888000] Bluetooth: RFCOMM socket layer initialized

[   38.888000] Bluetooth: RFCOMM TTY layer initialized

[   38.888000] Bluetooth: RFCOMM ver 1.8

[   51.708000] eth0: no IPv6 routers present

[  247.780000] usb 5-4: new high speed USB device using ehci_hcd and address 5

[  247.928000] usb 5-4: configuration #1 chosen from 1 choice

[  248.072000] usbcore: registered new interface driver libusual

[  248.088000] Initializing USB Mass Storage driver...

[  248.088000] scsi2 : SCSI emulation for USB Mass Storage devices

[  248.088000] usbcore: registered new interface driver usb-storage

[  248.088000] USB Mass Storage support registered.

[  248.088000] usb-storage: device found at 5

[  248.088000] usb-storage: waiting for device to settle before scanning

[  253.092000] usb-storage: device scan complete

[  253.092000] scsi 2:0:0:0: Direct-Access     LEXAR    JD FIREFLY       3000 PQ: 0 ANSI: 0 CCS

[  253.096000] SCSI device sdb: 506880 512-byte hdwr sectors (260 MB)

[  253.096000] sdb: Write Protect is off

[  253.096000] sdb: Mode Sense: 43 00 00 00

[  253.096000] sdb: assuming drive cache: write through

[  253.096000] SCSI device sdb: 506880 512-byte hdwr sectors (260 MB)

[  253.100000] sdb: Write Protect is off

[  253.100000] sdb: Mode Sense: 43 00 00 00

[  253.100000] sdb: assuming drive cache: write through

[  253.100000]  sdb: sdb2 < sdb5 >

[  253.228000] sd 2:0:0:0: Attached scsi removable disk sdb

[  253.228000] sd 2:0:0:0: Attached scsi generic sg2 type 0

Revision history for this message

Tom Ainsworth (kittiluver) wrote on 2007-03-30:

#8

7) cat /proc/interrupts

CPU0 CPU1

0: 3766 1042051 IO-APIC-edge timer

1: 899 0 IO-APIC-edge i8042

8: 48 0 IO-APIC-edge rtc

9: 43215 0 IO-APIC-fasteoi acpi

12: 1348 0 IO-APIC-edge i8042

14: 27762 1552 IO-APIC-edge libata

15: 45538 0 IO-APIC-edge libata

16: 555450 0 IO-APIC-fasteoi ohci1394, sdhci:slot0, tifm_7xx1, yenta, wifi0

17: 247976 0 IO-APIC-fasteoi uhci_hcd:usb4, i915@pci:0000:00:02.0

18: 0 0 IO-APIC-fasteoi uhci_hcd:usb3

19: 226457 0 IO-APIC-fasteoi uhci_hcd:usb1, ehci_hcd:usb5

20: 0 0 IO-APIC-fasteoi uhci_hcd:usb2

21: 98990 34621 IO-APIC-fasteoi eth0

22: 1869 0 IO-APIC-fasteoi HDA Intel

NMI: 0 0

LOC: 1045669 1045672

ERR: 0

MIS: 0

Revision history for this message

Tom Ainsworth (kittiluver) wrote on 2007-03-30: Re: [Bug 98574] No sound in Toshiba P105-S6147 laptop

#9

Brian Murray wrote:
> Thanks for taking the time to report this bug and helping to make Ubuntu
> better. Could you please add the output requested at
> https://help.ubuntu.com/community/DebuggingSoundProblems ? Thanks in
> advance.
>
> status needsinfo
> assignee <email address hidden>
>
>
> ** Changed in: Ubuntu
> Assignee: (unassigned) => Brian Murray
> Status: Unconfirmed => Needs Info
>
>
Brian
I supplied the output as requested, but it doesn't look as Modular as
the example, but I believe all the info is there.
I am new at this stuff, but will supply whatever else you may need.
Tom :-)

Revision history for this message

Tom Ainsworth (kittiluver) wrote on 2007-03-30:

#10

Brian Murray wrote:
> Thanks for taking the time to report this bug and helping to make Ubuntu
> better. Could you please add the output requested at
> https://help.ubuntu.com/community/DebuggingSoundProblems ? Thanks in
> advance.
>
> status needsinfo
> assignee <email address hidden>
>
>
> ** Changed in: Ubuntu
> Assignee: (unassigned) => Brian Murray
> Status: Unconfirmed => Needs Info
>
>
Just discovered Bug #83544 on record that might be related to my Toshiba
problem.
Thought I'd point it out since I discovered it while doing a "google"
for this problem.
Tom

Revision history for this message

krzyinsane (rick-masters) wrote on 2007-08-01:

#11

I have this same issue; same laptop.
I have to boot with acpi=off option. I've been hoping for fix for this since the Feisty release.
Please help.

Revision history for this message

Gene Lapointe (gene6482) wrote on 2007-10-11:

#12

I'm pretty sure this is a duplicate. Check this out

https://bugs.launchpad.net/ubuntu/+s...22/+bug/136469

Revision history for this message

Gene Lapointe (gene6482) wrote on 2007-10-11:

#13

Oops, https://bugs.launchpad.net/ubuntu/+source/linux-source-2.6.22/+bug/136469

Revision history for this message

John Kosta (johnkosta) wrote on 2007-11-10:

#14

I have this problem also with same laptop on 7.10 with 2.6.22-14-generic

Revision history for this message

nine (niin-deactivatedaccount-deactivatedaccount) wrote on 2008-07-10:

#15

Thank you for taking the time to report this bug and helping to make Ubuntu better. This particular bug appears to be a duplicate of bug 136479, so it is being marked as such.

The issue should be gone in the current Hardy Heron 8.04 LTS release. If that is not the case, please feel free to report the fact here.

The Intrepid Ibex 8.10 Alpha2 is also scheduled for release today. It will appear at the following when available: http://www.ubuntu.com/testing/intrepid/alpha2 . It contains the actively developed 2.6.26 Ubuntu kernel.

If the issue *does* exist in Hardy, it would be great if you could test this upcoming release via a LiveCD and verify if the issue still exists. If so, please include the appropriate debugging information as outlined at https://wiki.ubuntu.com/DebuggingSoundProblems . Thanks a lot.

Revision history for this message

tdq11 (tdq11) wrote on 2008-07-10: bug 98574

#16

Sound/acpi confict still not fixed on my Toshiba p100-jr5, even in Hardy 8.04. I still must disable acpi to enable sound. I would certainly be willing to test via a live cd. I will start today.
Thank you.

_________________________________________________________________
Try Chicktionary, a game that tests how many words you can form from the letters given. Find this and more puzzles at Live Search Games!
http://g.msn.ca/ca55/207

Revision history for this message

Launchpad Janitor (janitor) wrote on 2008-08-11: This bug is now reported against the 'linux' package

#17

Beginning with the Hardy Heron 8.04 development cycle, all open Ubuntu kernel bugs need to be reported against the "linux" kernel package. We are automatically migrating this bug to the new "linux" package. However, development has already began for the upcoming Intrepid Ibex 8.10 release. It would be helpful if you could test the upcoming release and verify if this is still an issue - http://www.ubuntu.com/testing . If the issue still exists, please update this report by changing the Status of the "linux" task from "Incomplete" to "New". We appreciate your patience and understanding as we make this transition. Thanks!

Affects		Status	Importance	Assigned to	Milestone
	linux (Ubuntu)	Incomplete	Undecided	Unassigned
	linux-source-2.6.20 (Ubuntu)	Won't Fix	Undecided	Ubuntu Audio Team

Ubuntu
linux-source-2.6.20 package

No sound in Toshiba P105-S6147 laptop

Bug Description

Other bug subscribers

Remote bug watches

Ubuntulinux-source-2.6.20 package

No sound in Toshiba P105-S6147 laptop

Bug Description

Other bug subscribers

Remote bug watches

Ubuntu
linux-source-2.6.20 package