Problems installing 7.04 beta on Acer Aspire 3023 WLMi

Feedback on Ubuntu 7.04 beta installation on an Acer Aspire 3023 WLMi notebook

the dmesg and lspci outputs are from the desktop live CD

Desktop:

Goodness:
Hardware is mostly supported, including display acceleration.

Problems:

Checking CD for defects - a result of 'checksum failures = 0' will not be comprehensible to a new user, consider Plain English - e.g. CDROM OK, CD Passed, etc.
Wireless doesn't go (presumably a firmware issue)
Keyboard not detected properly (UK not US layout)
Display is 800x 600 in top left corner, nice image but repeated on bottom 200 pixels and rest of screen (right hand 480 pixels, top to bottom) black Took a screenshot but it doesn't show the error. Suggested fix: prevent repeated display (2 menus, cursors etc. are confusing!), or better, make the default resolution for the Aspire 3020 / 5020 1280x800.
Very disturbing horizontal flickering noise on desktop logout
Install screen is bigger than viewable area - can't see forward and back buttons - unwilling to proceed at this point (especially as I want to preserve my home and WinXP directories and not automatically partition)!

install in safe graphics mode: fails while loading X, then hangs while attempting to load bcm43xx_mirocode5.fw

Result: Aborted installation attempt.

Server:

Goodness:
Apart from being VGA and a bit crufty to look at:
Partitioning works
Familiar options
LAMP install works (main reason I install Ubuntu server).

Badness
Setup hangs on 'Configuring apt': Scanning the mirror... screen (Ctrl-Alt-Del reboot) is this because I am behind a port-blocking firewall? Or possibly because my network cable might have been a bit flaky... solution: don't configure network during installation!
vi appears not to understand my Insert key, despite setting up the gb keyboard so editing /etc/network/interfaces was impossible. pico works.
can't access apt servers:
Err http://gb.archive.ubuntu.com feisty/main Translation-en_GB
   connection failed
ping and wget www.google.com works
Bit of a pain, because I want to put a desktop on my server installation!

Gave up at this point (other things to get on with)

Hope you find the feedback useful

Mike

--
Michael Doube BPhil BVSc MRCVS
Veterinary Surgeon
Managing Director
doube.net ltd

[ 0.000000] Linux version 2.6.20-12-generic (root@palmer) (gcc version 4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #2 SMP Wed Mar 21 20:55:46 UTC 2007 (Ubuntu 2.6.20-12.20-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] sanitize start
[ 0.000000] sanitize end
[ 0.000000] copy_e820_map() start: 0000000000000000 size: 000000000009b800 end: 000000000009b800 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 000000000009b800 size: 0000000000004800 end: 00000000000a0000 type: 2
[ 0.000000] copy_e820_map() start: 00000000000d0000 size: 0000000000030000 end: 0000000000100000 type: 2
[ 0.000000] copy_e820_map() start: 0000000000100000 size: 000000004fda0000 end: 000000004fea0000 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 000000004fea0000 size: 000000000000e000 end: 000000004feae000 type: 3
[ 0.000000] copy_e820_map() start: 000000004feae000 size: 0000000000052000 end: 000000004ff00000 type: 4
[ 0.000000] copy_e820_map() start: 000000004ff00000 size: 0000000000100000 end: 0000000050000000 type: 2
[ 0.000000] copy_e820_map() start: 00000000fec00000 size: 0000000000010000 end: 00000000fec10000 type: 2
[ 0.000000] copy_e820_map() start: 00000000fee00000 size: 0000000000001000 end: 00000000fee01000 type: 2
[ 0.000000] copy_e820_map() start: 00000000fff80000 size: 0000000000080000 end: 0000000100000000 type: 2
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009b800 (usable)
[ 0.000000] BIOS-e820: 000000000009b800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000d0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000004fea0000 (usable)
[ 0.000000] BIOS-e820: 000000004fea0000 - 000000004feae000 (ACPI data)
[ 0.000000] BIOS-e820: 000000004feae000 - 000000004ff00000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000004ff00000 - 0000000050000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[ 0.000000] 382MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] found SMP MP-table at 000f6de0
[ 0.000000] Entering add_active_range(0, 0, 327328) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 229376
[ 0.000000] HighMem 229376 -> 327328
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 327328
[ 0.000000] On node 0 totalpages: 327328
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1760 pages used for memmap
[ 0.000000] Normal zone: 223520 pages, LIFO batch:31
[ 0.000000] HighMem zone: 765 pages used for memmap
[ 0.000000] HighMem zone: 97187 pages, LIFO batch:31
[ 0.000000] DMI 2.3 present.
[ 0.000000] ACPI: RSDP (v000 PTLTD ) @ 0x000f6da0
[ 0.000000] ACPI: RSDT (v001 PTLTD RSDT 0x06040000 LTP 0x00000000) @ 0x4fea81c2
[ 0.000000] ACPI: FADT (v001 ATI Piranha 0x06040000 ATI 0x000f4240) @ 0x4feade20
[ 0.000000] ACPI: SSDT (v001 PTLTD POWERNOW 0x06040000 LTP 0x00000001) @ 0x4feade94
[ 0.000000] ACPI: MADT (v001 PTLTD APIC 0x06040000 LTP 0x00000000) @ 0x4feadf6a
[ 0.000000] ACPI: MCFG (v001 PTLTD MCFG 0x06040000 LTP 0x00000000) @ 0x4feadfc4
[ 0.000000] ACPI: DSDT (v001 ATI SB400 0x06040000 MSFT 0x0100000e) @ 0x00000000
[ 0.000000] ATI board detected. Disabling timer routing over 8254.
[ 0.000000] ACPI: PM-Timer IO Port: 0x8008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 15:12 APIC version 16
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 21 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 60000000 (gap: 50000000:aec00000)
[ 0.000000] Detected 1800.186 MHz processor.
[ 64.812227] Built 1 zonelists. Total pages: 324771
[ 64.812232] Kernel command line: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.gz quiet splash --
[ 64.812400] mapped APIC to ffffd000 (fee00000)
[ 64.812402] mapped IOAPIC to ffffc000 (fec00000)
[ 64.812406] Enabling fast FPU save and restore... done.
[ 64.812408] Enabling unmasked SIMD FPU exception support... done.
[ 64.812417] Initializing CPU#0
[ 64.812477] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 64.813816] Console: colour VGA+ 80x25
[ 64.814379] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 64.815338] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 64.851182] Memory: 1286376k/1309312k available (1990k kernel code, 21652k reserved, 890k data, 328k init, 391808k highmem)
[ 64.851193] virtual kernel memory layout:
[ 64.851194] fixmap : 0xfff4e000 - 0xfffff000 ( 708 kB)
[ 64.851196] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 64.851197] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
[ 64.851199] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 64.851200] .init : 0xc03d7000 - 0xc0429000 ( 328 kB)
[ 64.851201] .data : 0xc02f1b04 - 0xc03d06d4 ( 890 kB)
[ 64.851203] .text : 0xc0100000 - 0xc02f1b04 (1990 kB)
[ 64.851206] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 64.928311] Calibrating delay using timer specific routine.. 3603.80 BogoMIPS (lpj=7207610)
[ 64.928356] Security Framework v1.0.0 initialized
[ 64.928365] SELinux: Disabled at boot.
[ 64.928380] Mount-cache hash table entries: 512
[ 64.928531] CPU: After generic identify, caps: 078bfbff c3d3fbff 00000000 00000000 00000000 00000000 00000001
[ 64.928541] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 64.928543] CPU: L2 Cache: 128K (64 bytes/line)
[ 64.928546] CPU: After all inits, caps: 078bfbff c3d3fbff 00000000 00000410 00000000 00000000 00000001
[ 64.928558] Compat vDSO mapped to ffffe000.
[ 64.928563] Remapping vsyscall page to ffffe000
[ 64.928573] Checking 'hlt' instruction... OK.
[ 64.944422] SMP alternatives: switching to UP code
[ 64.944659] Freeing SMP alternatives: 11k freed
[ 64.944890] Early unpacking initramfs... done
[ 65.263396] ACPI: Core revision 20060707
[ 65.266392] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[ 65.271052] CPU0: AMD Mobile AMD Sempron(tm) Processor 3000+ stepping 00
[ 65.271072] Total of 1 processors activated (3603.80 BogoMIPS).
[ 65.271239] ENABLING IO-APIC IRQs
[ 65.271430] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 65.311099] ..MP-BIOS bug: 8254 timer not connected to IO-APIC
[ 65.311148] ...trying to set up timer (IRQ0) through the 8259A ... failed.
[ 65.311151] ...trying to set up timer as Virtual Wire IRQ... works.
[ 65.455565] Brought up 1 CPUs
[ 65.455784] Booting paravirtualized kernel on bare hardware
[ 65.455877] Time: 13:10:03 Date: 02/30/107
[ 65.455914] NET: Registered protocol family 16
[ 65.456014] EISA bus registered
[ 65.456018] ACPI: bus type pci registered
[ 65.468569] PCI: PCI BIOS revision 2.10 entry at 0xfd63c, last bus=6
[ 65.468571] PCI: Using configuration type 1
[ 65.468573] Setting up standard PCI resources
[ 65.475869] ACPI: Interpreter enabled
[ 65.475874] ACPI: Using IOAPIC for interrupt routing
[ 65.476395] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 65.476400] PCI: Probing PCI hardware (bus 00)
[ 65.478107] Boot video device is 0000:01:00.0
[ 65.478848] PCI: Transparent bridge - 0000:00:14.4
[ 65.478919] PCI: Bus #07 (-#08) is hidden behind transparent bridge #06 (-#06) (try 'pci=assign-busses')
[ 65.478922] Please report the result to linux-kernel to fix this permanently
[ 65.478954] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 65.482655] ACPI: PCI Interrupt Link [LNKA] (IRQs 10 11) *0, disabled.
[ 65.482888] ACPI: PCI Interrupt Link [LNKB] (IRQs 10 11) *0, disabled.
[ 65.483116] ACPI: PCI Interrupt Link [LNKC] (IRQs 10 11) *0, disabled.
[ 65.483342] ACPI: PCI Interrupt Link [LNKD] (IRQs 10 11) *0, disabled.
[ 65.483622] ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11) *0, disabled.
[ 65.483848] ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11) *0, disabled.
[ 65.484074] ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11) *0, disabled.
[ 65.484298] ACPI: PCI Interrupt Link [LNKH] (IRQs 10 11) *0, disabled.
[ 65.521419] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB6_._PRT]
[ 65.521616] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB7_._PRT]
[ 65.521885] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
[ 65.522257] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
[ 65.522838] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 65.522850] pnp: PnP ACPI init
[ 65.530724] pnp: PnP ACPI: found 10 devices
[ 65.530730] PnPBIOS: Disabled by ACPI PNP
[ 65.530790] PCI: Using ACPI for IRQ routing
[ 65.530793] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 65.530801] PCI: Cannot allocate resource region 7 of bridge 0000:00:06.0
[ 65.530804] PCI: Cannot allocate resource region 8 of bridge 0000:00:06.0
[ 65.530807] PCI: Cannot allocate resource region 7 of bridge 0000:00:07.0
[ 65.530809] PCI: Cannot allocate resource region 8 of bridge 0000:00:07.0
[ 65.551700] NET: Registered protocol family 8
[ 65.551702] NET: Registered protocol family 20
[ 65.552005] pnp: 00:08: ioport range 0x1080-0x1080 has been reserved
[ 65.552010] pnp: 00:08: ioport range 0x1200-0x120f has been reserved
[ 65.552012] pnp: 00:08: ioport range 0x500-0x51f has been reserved
[ 65.552015] pnp: 00:08: ioport range 0x40b-0x40b has been reserved
[ 65.552267] PCI: Bridge: 0000:00:02.0
[ 65.552270] IO window: 9000-9fff
[ 65.552274] MEM window: c0100000-c01fffff
[ 65.552277] PREFETCH window: c8000000-cfffffff
[ 65.552280] PCI: Bridge: 0000:00:06.0
[ 65.552281] IO window: disabled.
[ 65.552283] MEM window: disabled.
[ 65.552285] PREFETCH window: disabled.
[ 65.552288] PCI: Bridge: 0000:00:07.0
[ 65.552290] IO window: disabled.
[ 65.552292] MEM window: disabled.
[ 65.552294] PREFETCH window: disabled.
[ 65.552307] PCI: Bus 7, cardbus bridge: 0000:06:06.0
[ 65.552309] IO window: 0000a400-0000a4ff
[ 65.552315] IO window: 0000a800-0000a8ff
[ 65.552321] PREFETCH window: 60000000-63ffffff
[ 65.552326] MEM window: 68000000-6bffffff
[ 65.552332] PCI: Bridge: 0000:00:14.4
[ 65.552335] IO window: a000-afff
[ 65.552342] MEM window: c0200000-c02fffff
[ 65.552347] PREFETCH window: 60000000-65ffffff
[ 65.552362] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 65.552369] PCI: Setting latency timer of device 0000:00:06.0 to 64
[ 65.552376] PCI: Setting latency timer of device 0000:00:07.0 to 64
[ 65.552408] ACPI: PCI Interrupt 0000:06:06.0[A] -> GSI 20 (level, low) -> IRQ 16
[ 65.552451] NET: Registered protocol family 2
[ 65.591397] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 65.591604] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 65.592915] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 65.593598] TCP: Hash tables configured (established 131072 bind 65536)
[ 65.593602] TCP reno registered
[ 65.603421] checking if image is initramfs... it is
[ 66.231884] Freeing initrd memory: 6918k freed
[ 66.232300] audit: initializing netlink socket (disabled)
[ 66.232313] audit(1175260203.464:1): initialized
[ 66.232373] highmem bounce pool size: 64 pages
[ 66.232452] VFS: Disk quotas dquot_6.5.1
[ 66.232474] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 66.232533] io scheduler noop registered
[ 66.232535] io scheduler anticipatory registered
[ 66.232538] io scheduler deadline registered
[ 66.232551] io scheduler cfq registered (default)
[ 66.673867] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 66.673887] assign_interrupt_mode Found MSI capability
[ 66.673890] Allocate Port Service[0000:00:02.0:pcie00]
[ 66.673952] PCI: Setting latency timer of device 0000:00:06.0 to 64
[ 66.673970] assign_interrupt_mode Found MSI capability
[ 66.673972] Allocate Port Service[0000:00:06.0:pcie00]
[ 66.674027] PCI: Setting latency timer of device 0000:00:07.0 to 64
[ 66.674045] assign_interrupt_mode Found MSI capability
[ 66.674047] Allocate Port Service[0000:00:07.0:pcie00]
[ 66.674157] isapnp: Scanning for PnP cards...
[ 67.028279] isapnp: No Plug & Play device found
[ 67.062013] Real Time Clock Driver v1.12ac
[ 67.062056] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 67.062877] ACPI: PCI Interrupt 0000:00:14.6[B] -> GSI 17 (level, low) -> IRQ 17
[ 67.062887] ACPI: PCI interrupt for device 0000:00:14.6 disabled
[ 67.062950] mice: PS/2 mouse device common for all mice
[ 67.063394] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 67.063614] input: Macintosh mouse button emulation as /class/input/input0
[ 67.063643] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 67.063647] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 67.063908] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 67.064148] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 67.064223] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 67.064228] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 67.064231] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 67.064234] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 67.064236] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 67.064342] EISA: Probing bus 0 at eisa.0
[ 67.064352] Cannot allocate resource for EISA slot 1
[ 67.064380] Cannot allocate resource for EISA slot 8
[ 67.064382] EISA: Detected 0 cards.
[ 67.094438] TCP cubic registered
[ 67.094449] NET: Registered protocol family 1
[ 67.094475] Using IPI No-Shortcut mode
[ 67.094578] ACPI: (supports S0 S3 S4 S5)
[ 67.094622] Magic number: 15:230:181
[ 67.094667] hash matches device ttyr7
[ 67.095062] Freeing unused kernel memory: 328k freed
[ 67.096673] input: AT Translated Set 2 keyboard as /class/input/input1
[ 67.097042] Time: tsc clocksource has been installed.
[ 68.372203] Capability LSM initialized
[ 68.423681] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 3.100000] Time: acpi_pm clocksource has been installed.
[ 3.124000] ACPI: Thermal Zone [TZS0] (64 C)
[ 3.176000] ACPI: Thermal Zone [TZS1] (29 C)
[ 3.228000] ACPI: Thermal Zone [TZSV] (37 C)
[ 3.876000] usbcore: registered new interface driver usbfs
[ 3.876000] usbcore: registered new interface driver hub
[ 3.876000] usbcore: registered new device driver usb
[ 3.876000] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[ 3.876000] ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 19 (level, low) -> IRQ 18
[ 3.876000] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 3.880000] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1
[ 3.880000] ohci_hcd 0000:00:13.0: irq 18, io mem 0xc0000000
[ 3.964000] usb usb1: configuration #1 chosen from 1 choice
[ 3.964000] hub 1-0:1.0: USB hub found
[ 3.964000] hub 1-0:1.0: 4 ports detected
[ 4.028000] ieee1394: Initialized config rom entry `ip1394'
[ 4.068000] ACPI: PCI Interrupt 0000:00:13.1[A] -> GSI 19 (level, low) -> IRQ 18
[ 4.068000] ohci_hcd 0000:00:13.1: OHCI Host Controller
[ 4.068000] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 2
[ 4.068000] ohci_hcd 0000:00:13.1: irq 18, io mem 0xc0001000
[ 4.128000] usb usb2: configuration #1 chosen from 1 choice
[ 4.128000] hub 2-0:1.0: USB hub found
[ 4.128000] hub 2-0:1.0: 4 ports detected
[ 4.232000] ACPI: PCI Interrupt 0000:00:13.2[A] -> GSI 19 (level, low) -> IRQ 18
[ 4.232000] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 4.232000] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 3
[ 4.232000] ehci_hcd 0000:00:13.2: irq 18, io mem 0xc0002000
[ 4.232000] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 4.232000] usb usb3: configuration #1 chosen from 1 choice
[ 4.232000] hub 3-0:1.0: USB hub found
[ 4.232000] hub 3-0:1.0: 8 ports detected
[ 4.336000] ATIIXP: IDE controller at PCI slot 0000:00:14.1
[ 4.336000] ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 19
[ 4.336000] ATIIXP: chipset revision 0
[ 4.336000] ATIIXP: not 100% native mode: will probe irqs later
[ 4.336000] ide0: BM-DMA at 0x8410-0x8417, BIOS settings: hda:DMA, hdb:pio
[ 4.336000] ide1: BM-DMA at 0x8418-0x841f, BIOS settings: hdc:DMA, hdd:pio
[ 4.336000] Probing IDE interface ide0...
[ 4.624000] hda: IC25N080ATMR04-0, ATA DISK drive
[ 5.296000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 5.636000] Probing IDE interface ide1...
[ 6.376000] hdc: Slimtype DVDRW SOSW-833S, ATAPI CD/DVD-ROM drive
[ 7.048000] ide1 at 0x170-0x177,0x376 on irq 15
[ 7.056000] SCSI subsystem initialized
[ 7.060000] libata version 2.20 loaded.
[ 7.064000] ACPI: PCI Interrupt 0000:06:06.2[C] -> GSI 22 (level, low) -> IRQ 20
[ 7.116000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[20] MMIO=[c0208000-c02087ff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 7.116000] r8169 Gigabit Ethernet driver 2.2LK loaded
[ 7.116000] ACPI: PCI Interrupt 0000:06:07.0[A] -> GSI 23 (level, low) -> IRQ 22
[ 7.116000] eth0: RTL8169sb/8110sb at 0xf885a400, 00:0a:e4:e0:b1:0a, IRQ 22
[ 7.128000] hda: max request size: 512KiB
[ 7.144000] hda: 156301488 sectors (80026 MB) w/7884KiB Cache, CHS=16383/255/63, UDMA(100)
[ 7.144000] hda: cache flushes supported
[ 7.144000] hda: hda1 hda2 hda3 < hda5 hda6 > hda4
[ 7.588000] hdc: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
[ 7.588000] Uniform CD-ROM driver Revision: 3.20
[ 8.388000] ieee1394: Host added: ID:BUS[0-00:1023] GUID[1234567812345678]
[ 8.788000] kjournald starting. Commit interval 5 seconds
[ 8.788000] EXT3-fs: mounted filesystem with ordered data mode.
[ 8.996000] kjournald starting. Commit interval 5 seconds
[ 8.996000] EXT3-fs: mounted filesystem with ordered data mode.
[ 9.652000] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 9.676000] ISO 9660 Extensions: RRIP_1991A
[ 9.708000] Registering unionfs 20060916-2203
[ 9.708000] unionfs: debugging is not enabled
[ 9.716000] loop: loaded (max 8 devices)
[ 9.840000] squashfs: version 3.2-r2 (2007/01/15) Phillip Lougher
[ 88.920000] r8169: eth0: link down
[ 89.588000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 90.488000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 90.916000] input: PC Speaker as /class/input/input2
[ 91.012000] NET: Registered protocol family 17
[ 91.180000] Linux agpgart interface v0.101 (c) Dave Jones
[ 91.276000] ieee80211_crypt: registered algorithm 'NULL'
[ 91.276000] ieee80211: 802.11 data/management/control stack, git-1.1.13
[ 91.276000] ieee80211: Copyright (C) 2004-2005 Intel Corporation <email address hidden>
[ 91.384000] piix4_smbus 0000:00:14.0: Found 0000:00:14.0 device
[ 91.552000] ACPI: PCI Interrupt 0000:06:06.3[A] -> GSI 20 (level, low) -> IRQ 16
[ 91.604000] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x12a0b1, caps: 0xa04713/0x204000
[ 91.636000] input: SynPS/2 Synaptics TouchPad as /class/input/input3
[ 91.736000] Yenta: CardBus bridge found at 0000:06:06.0 [1025:0080]
[ 91.736000] Yenta: Using CSCINT to route CSC interrupts to PCI
[ 91.736000] Yenta: Routing CardBus interrupts to PCI
[ 91.736000] Yenta TI: socket 0000:06:06.0, mfunc 0x010a1b22, devctl 0x64
[ 91.948000] sdhci: Secure Digital Host Controller Interface driver, 0.12
[ 91.948000] sdhci: Copyright(c) Pierre Ossman
[ 91.968000] Yenta: ISA IRQ mask 0x0ef8, PCI irq 16
[ 91.968000] Socket status: 30000006
[ 91.968000] Yenta: Raising subordinate bus# of parent bus (#06) from #06 to #08
[ 91.968000] pcmcia: parent PCI bridge I/O window: 0xa000 - 0xafff
[ 91.968000] cs: IO port probe 0xa000-0xafff: clean.
[ 91.968000] pcmcia: parent PCI bridge Memory window: 0xc0200000 - 0xc02fffff
[ 91.968000] pcmcia: parent PCI bridge Memory window: 0x60000000 - 0x65ffffff
[ 91.968000] sdhci: SDHCI controller found at 0000:06:06.4 [104c:8034] (rev 0)
[ 91.968000] ACPI: PCI Interrupt 0000:06:06.4[A] -> GSI 20 (level, low) -> IRQ 16
[ 91.968000] mmc0: SDHCI at 0xc0209000 irq 16 DMA
[ 91.972000] mmc1: SDHCI at 0xc0208c00 irq 16 DMA
[ 91.972000] mmc2: SDHCI at 0xc0208800 irq 16 DMA
[ 92.028000] bcm43xx driver
[ 92.028000] ACPI: PCI Interrupt 0000:06:05.0[A] -> GSI 21 (level, low) -> IRQ 21
[ 92.696000] ACPI: PCI Interrupt 0000:00:14.5[B] -> GSI 17 (level, low) -> IRQ 17
[ 92.980000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[ 93.056000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[ 93.092000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[ 93.212000] ACPI: PCI Interrupt 0000:00:14.6[B] -> GSI 17 (level, low) -> IRQ 17
[ 93.276000] cs: IO port probe 0x100-0x3af: clean.
[ 93.276000] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
[ 93.280000] cs: IO port probe 0x820-0x8ff: excluding 0x878-0x87f
[ 93.280000] cs: IO port probe 0xc00-0xcf7: excluding 0xc00-0xc07 0xc10-0xc17 0xc50-0xc57 0xc68-0xc6f 0xcd0-0xcdf
[ 93.280000] cs: IO port probe 0xa00-0xaff: clean.
[ 93.324000] MC'97 1 converters and GPIO not ready (0xff00)
[ 94.488000] fuse init (API version 7.8)
[ 100.872000] ACPI: AC Adapter [ADP1] (off-line)
[ 101.256000] ACPI: Battery Slot [BAT0] (battery present)
[ 101.340000] input: Power Button (FF) as /class/input/input4
[ 101.364000] ACPI: Power Button (FF) [PWRF]
[ 101.428000] input: Lid Switch as /class/input/input5
[ 101.456000] ACPI: Lid Switch [LID0]
[ 101.504000] input: Sleep Button (CM) as /class/input/input6
[ 101.504000] ACPI: Sleep Button (CM) [SLPB]
[ 101.600000] ACPI: ACPI Dock Station Driver
[ 101.628000] Using specific hotkey driver
[ 101.680000] ibm_acpi: ec object not found
[ 101.772000] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 101.776000] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 101.844000] pcc_acpi: loading...
[ 102.820000] powernow-k8: Found 1 Mobile AMD Sempron(tm) Processor 3000+ processors (version 2.00.00)
[ 102.820000] powernow-k8: 0 : fid 0xa (1800 MHz), vid 0xc
[ 102.820000] powernow-k8: 1 : fid 0x8 (1600 MHz), vid 0xe
[ 102.820000] powernow-k8: 2 : fid 0x0 (800 MHz), vid 0x17
[ 102.820000] powernow-k8: ph2 null fid transition 0xa
[ 110.708000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[ 113.768000] lp: driver loaded but no devices found
[ 114.100000] ppdev: user-space parallel port driver
[ 115.096000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[ 115.240000] [drm] Initialized drm 1.1.0 20060810
[ 115.292000] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 18 (level, low) -> IRQ 23
[ 115.292000] [drm] Initialized radeon 1.25.0 20060524 on minor 0
[ 116.936000] [drm] Setting GART location based on new memory map
[ 116.936000] [drm] Loading R300 Microcode
[ 116.936000] [drm] writeback test succeeded in 1 usecs
[ 122.404000] apm: BIOS not found.
[ 123.840000] Bluetooth: Core ver 2.11
[ 123.840000] NET: Registered protocol family 31
[ 123.840000] Bluetooth: HCI device and connection manager initialized
[ 123.840000] Bluetooth: HCI socket layer initialized
[ 123.984000] Bluetooth: L2CAP ver 2.8
[ 123.984000] Bluetooth: L2CAP socket layer initialized
[ 124.272000] Bluetooth: RFCOMM socket layer initialized
[ 124.272000] Bluetooth: RFCOMM TTY layer initialized
[ 124.272000] Bluetooth: RFCOMM ver 1.8
[ 127.872000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[ 129.236000] NET: Registered protocol family 10
[ 129.236000] lo: Disabled Privacy Extensions
[ 129.236000] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 139.616000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[ 163.216000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[ 186.740000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[ 209.960000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[ 233.228000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[ 356.676000] bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed.
[ 407.512000] usb 3-1: new high speed USB device using ehci_hcd and address 2
[ 407.656000] usb 3-1: configuration #1 chosen from 1 choice
[ 407.656000] hub 3-1:1.0: USB hub found
[ 407.656000] hub 3-1:1.0: 1 port detected
[ 407.964000] usb 3-1.1: new high speed USB device using ehci_hcd and address 3
[ 408.068000] usb 3-1.1: configuration #1 chosen from 1 choice
[ 408.284000] usbcore: registered new interface driver libusual
[ 408.308000] Initializing USB Mass Storage driver...
[ 408.308000] scsi0 : SCSI emulation for USB Mass Storage devices
[ 408.308000] usbcore: registered new interface driver usb-storage
[ 408.308000] USB Mass Storage support registered.
[ 408.308000] usb-storage: device found at 3
[ 408.308000] usb-storage: waiting for device to settle before scanning
[ 413.308000] usb-storage: device scan complete
[ 413.308000] scsi 0:0:0:0: Direct-Access USB 2.0 Flash Drive 1.00 PQ: 0 ANSI: 0 CCS
[ 413.408000] SCSI device sda: 2048000 512-byte hdwr sectors (1049 MB)
[ 413.408000] sda: Write Protect is off
[ 413.408000] sda: Mode Sense: 00 06 00 00
[ 413.408000] sda: assuming drive cache: write through
[ 413.412000] SCSI device sda: 2048000 512-byte hdwr sectors (1049 MB)
[ 413.412000] sda: Write Protect is off
[ 413.412000] sda: Mode Sense: 00 06 00 00
[ 413.412000] sda: assuming drive cache: write through
[ 413.412000] sda: sda1
[ 413.416000] sd 0:0:0:0: Attached scsi removable disk sda
[ 413.440000] sd 0:0:0:0: Attached scsi generic sg0 type 0

00:00.0 Host bridge: ATI Technologies Inc RS480 Host Bridge (rev 01)
 Subsystem: Acer Incorporated [ALI] Aspire 5024WLMMi
 Flags: bus master, 66MHz, medium devsel, latency 64

00:02.0 PCI bridge: ATI Technologies Inc RS480 PCI-X Root Port (prog-if 00 [Normal decode])
 Flags: bus master, fast devsel, latency 0
 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
 I/O behind bridge: 00009000-00009fff
 Memory behind bridge: c0100000-c01fffff
 Prefetchable memory behind bridge: c8000000-cfffffff
 Capabilities: <access denied>

00:06.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge (prog-if 00 [Normal decode])
 Flags: bus master, fast devsel, latency 0
 Bus: primary=00, secondary=09, subordinate=09, sec-latency=0
 Capabilities: <access denied>

00:07.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge (prog-if 00 [Normal decode])
 Flags: bus master, fast devsel, latency 0
 Bus: primary=00, secondary=04, subordinate=05, sec-latency=0
 Capabilities: <access denied>

00:13.0 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller (prog-if 10 [OHCI])
 Subsystem: Acer Incorporated [ALI] Unknown device 0080
 Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 18
 Memory at c0000000 (32-bit, non-prefetchable) [size=4K]
 Capabilities: <access denied>

00:13.1 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller (prog-if 10 [OHCI])
 Subsystem: Acer Incorporated [ALI] Aspire 5024WLMMi
 Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 18
 Memory at c0001000 (32-bit, non-prefetchable) [size=4K]
 Capabilities: <access denied>

00:13.2 USB Controller: ATI Technologies Inc IXP SB400 USB2 Host Controller (prog-if 20 [EHCI])
 Subsystem: Acer Incorporated [ALI] Aspire 5024WLMMi
 Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 18
 Memory at c0002000 (32-bit, non-prefetchable) [size=4K]
 Capabilities: <access denied>

00:14.0 SMBus: ATI Technologies Inc IXP SB400 SMBus Controller (rev 11)
 Subsystem: Acer Incorporated [ALI] Aspire 5024WLMMi
 Flags: 66MHz, medium devsel
 I/O ports at 8400 [size=16]
 Memory at c0003000 (32-bit, non-prefetchable) [size=1K]
 Capabilities: <access denied>

00:14.1 IDE interface: ATI Technologies Inc Standard Dual Channel PCI IDE Controller ATI (prog-if 8a [Master SecP PriP])
 Subsystem: Acer Incorporated [ALI] Aspire 5024WLMMi
 Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 19
 I/O ports at 01f0 [size=8]
 I/O ports at 03f4 [size=1]
 I/O ports at 0170 [size=8]
 I/O ports at 0374 [size=1]
 I/O ports at 8410 [size=16]
 Capabilities: <access denied>

00:14.3 ISA bridge: ATI Technologies Inc IXP SB400 PCI-ISA Bridge
 Subsystem: Acer Incorporated [ALI] Aspire 5024WLMi
 Flags: bus master, 66MHz, medium devsel, latency 0

00:14.4 PCI bridge: ATI Technologies Inc IXP SB400 PCI-PCI Bridge (prog-if 01 [Subtractive decode])
 Flags: bus master, 66MHz, medium devsel, latency 64
 Bus: primary=00, secondary=06, subordinate=08, sec-latency=64
 I/O behind bridge: 0000a000-0000afff
 Memory behind bridge: c0200000-c02fffff
 Prefetchable memory behind bridge: 60000000-65ffffff

00:14.5 Multimedia audio controller: ATI Technologies Inc IXP SB400 AC'97 Audio Controller (rev 02)
 Subsystem: Acer Incorporated [ALI] Aspire 5024WLMMi
 Flags: bus master, 66MHz, slow devsel, latency 64, IRQ 17
 Memory at c0003400 (32-bit, non-prefetchable) [size=256]
 Capabilities: <access denied>

00:14.6 Modem: ATI Technologies Inc ATI SB400 - AC'97 Modem Controller (rev 02) (prog-if 00 [Generic])
 Subsystem: Acer Incorporated [ALI] Aspire 5024WLMMi
 Flags: bus master, 66MHz, slow devsel, latency 64, IRQ 17
 Memory at c0003800 (32-bit, non-prefetchable) [size=256]
 Capabilities: <access denied>

00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
 Flags: fast devsel
 Capabilities: <access denied>

00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
 Flags: fast devsel

00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
 Flags: fast devsel

00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
 Flags: fast devsel

01:00.0 VGA compatible controller: ATI Technologies Inc Radeon Mobility X700 (PCIE) (prog-if 00 [VGA])
 Subsystem: Acer Incorporated [ALI] Aspire 5024WLMi
 Flags: bus master, fast devsel, latency 0, IRQ 23
 Memory at c8000000 (32-bit, prefetchable) [size=128M]
 I/O ports at 9000 [size=256]
 Memory at c0100000 (32-bit, non-prefetchable) [size=64K]
 [virtual] Expansion ROM at c0120000 [disabled] [size=128K]
 Capabilities: <access denied>

06:05.0 Network controller: Broadcom Corporation BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller (rev 02)
 Subsystem: AMBIT Microsystem Corp. Aspire 3022WLMi, 5024WLMi
 Flags: bus master, fast devsel, latency 64, IRQ 21
 Memory at c0204000 (32-bit, non-prefetchable) [size=8K]

06:06.0 CardBus bridge: Texas Instruments PCIxx21/x515 Cardbus Controller
 Subsystem: Acer Incorporated [ALI] Aspire 5024WLMi
 Flags: bus master, medium devsel, latency 168, IRQ 16
 Memory at c020a000 (32-bit, non-prefetchable) [size=4K]
 Bus: primary=06, secondary=07, subordinate=08, sec-latency=176
 Memory window 0: 60000000-63fff000 (prefetchable)
 Memory window 1: 68000000-6bfff000
 I/O window 0: 0000a400-0000a4ff
 I/O window 1: 0000a800-0000a8ff
 16-bit legacy interface ports at 0001

06:06.2 FireWire (IEEE 1394): Texas Instruments OHCI Compliant IEEE 1394 Host Controller (prog-if 10 [OHCI])
 Subsystem: Acer Incorporated [ALI] Aspire 5024WLMi
 Flags: bus master, medium devsel, latency 64, IRQ 20
 Memory at c0208000 (32-bit, non-prefetchable) [size=2K]
 Memory at c0200000 (32-bit, non-prefetchable) [size=16K]
 Capabilities: <access denied>

06:06.3 Mass storage controller: Texas Instruments PCIxx21 Integrated FlashMedia Controller
 Subsystem: Acer Incorporated [ALI] Aspire 5024WLMi
 Flags: bus master, medium devsel, latency 64, IRQ 16
 Memory at c0206000 (32-bit, non-prefetchable) [size=8K]
 Capabilities: <access denied>

06:06.4 Generic system peripheral [0805]: Texas Instruments PCI6411/6421/6611/6621/7411/7421/7611/7621 Secure Digital Controller
 Subsystem: Acer Incorporated [ALI] Aspire 5024WLMi
 Flags: bus master, medium devsel, latency 64, IRQ 16
 Memory at c0209000 (32-bit, non-prefetchable) [size=256]
 Memory at c0208c00 (32-bit, non-prefetchable) [size=256]
 Memory at c0208800 (32-bit, non-prefetchable) [size=256]
 Capabilities: <access denied>

06:07.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8169 Gigabit Ethernet (rev 10)
 Subsystem: Acer Incorporated [ALI] Aspire 5024WLMi
 Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 22
 I/O ports at a000 [size=256]
 Memory at c0209400 (32-bit, non-prefetchable) [size=256]
 [virtual] Expansion ROM at 64000000 [disabled] [size=128K]
 Capabilities: <access denied>