[Dapper]CD-RW/DVD+RW Drive: hda: drive_cmd: status=0x51 { DriveReady SeekComplete Error }

Created an attachment (id=5526)
kernel log

$ cat /proc/interrupts
           CPU0 CPU1
  0: 7010252 0 IO-APIC-edge timer
  1: 1569 0 IO-APIC-edge i8042
  8: 4 0 IO-APIC-edge rtc
  9: 1 0 IO-APIC-level acpi
 12: 1545104 0 IO-APIC-edge i8042
 14: 62822 0 IO-APIC-edge ide0
 15: 29024 0 IO-APIC-edge ide1
169: 4 0 IO-APIC-level uhci_hcd:usb1, yenta, ohci1394
177: 0 0 IO-APIC-level uhci_hcd:usb2
185: 0 0 IO-APIC-level uhci_hcd:usb3
193: 0 0 IO-APIC-level ehci_hcd:usb4
201: 33158 0 IO-APIC-level Intel 82801DB-ICH4, eth0
209: 429443 0 IO-APIC-level nvidia
NMI: 0 0
LOC: 7010003 7010002
ERR: 0
MIS: 0

Can you try booting with ide=nodma?

Created an attachment (id=5527)
kern.log

(In reply to comment #3)
> Can you try booting with ide=nodma?

Ok booted with that command,i edit this in grub on boot,i hoop this is correct.
system is slower don't know about that.
Sorry for mu bad english

Ok, is there a disk in the cdrom driver? If not, can you put one in there and
see if it continues. If there is one, remove it and see if that changes anything.

Created an attachment (id=5528)
dmesg log

Still booted with ide=nodma,no disk in the cdrom driver.
When a put a disk in the driver dmesg fills up with errors,when a remove the
disk no changes.
This error does not happen in Breezy Badger on the same laptop.

second this. My laptop is VPR Matrix 220A which has Matshita CD-RW CW-8122
according to Device manager.

Booted with 2.6.15-10 (this error is introduced from 2.6.15, I think.), here are
part of dmesg regarding CDROM. I don't have any CD in the device.
...
[4294674.574000] hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
[4294674.574000] Uniform CD-ROM driver Revision: 3.20
...
[4294674.960000] cdrom: open failed.
...
[4294728.708000] hdc: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
[4294728.708000] hdc: drive_cmd: error=0x04 { AbortedCommand }
[4294728.708000] ide: failed opcode was: 0xec
[4294728.734000] hdc: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
[4294728.734000] hdc: drive_cmd: error=0x04 { AbortedCommand }
[4294728.734000] ide: failed opcode was: 0xec

Try this:

echo "blacklist ide_generic" > blacklist-ide
sudo mv blacklist-ide /etc/modprobe.d/
sudo update-initramfs -u

Then reboot.

Created an attachment (id=5530)
kern.log after blacklist-ide

Blacklist-ide thing doesn't at all as kern.log attached. Not only this problem,
I am still having https://launchpad.net/malone/bugs/5263 too.

Created an attachment (id=5533)
kern.log after blacklist-ide

Still the same error.

Does this bug still occur with Dapper final?

Beginning with the Hardy Heron 8.04 development cycle, all open Ubuntu kernel bugs need to be reported against the "linux" kernel package. We are automatically migrating this linux-source-2.6.15 kernel bug to the new "linux" package. We appreciate your patience and understanding as we make this transition. Also, if you would be interested in testing the upcoming Intrepid Ibex 8.10 release, it is available at http://www.ubuntu.com/testing . Please let us know your results. Thanks!

The Ubuntu Kernel Team is planning to move to the 2.6.27 kernel for the upcoming Intrepid Ibex 8.10 release. As a result, the kernel team would appreciate it if you could please test this newer 2.6.27 Ubuntu kernel. There are one of two ways you should be able to test:

1) If you are comfortable installing packages on your own, the linux-image-2.6.27-* package is currently available for you to install and test.

--or--

2) The upcoming Alpha5 for Intrepid Ibex 8.10 will contain this newer 2.6.27 Ubuntu kernel. Alpha5 is set to be released Thursday Sept 4. Please watch http://www.ubuntu.com/testing for Alpha5 to be announced. You should then be able to test via a LiveCD.

Please let us know immediately if this newer 2.6.27 kernel resolves the bug reported here or if the issue remains. More importantly, please open a new bug report for each new bug/regression introduced by the 2.6.27 kernel and tag the bug report with 'linux-2.6.27'. Also, please specifically note if the issue does or does not appear in the 2.6.26 kernel. Thanks again, we really appreicate your help and feedback.

Unfortunately this bug report is being closed because we received no response to the last inquiry for information. However, the Intrepid Ibex 8.10 Beta release was most recently announced - http://www.ubuntu.com/testing/intrepid/beta . If you are able to confirm this is still an issue with this most recent release please feel free to reopen this report. To reopen the bug report you can click on the current status, under the Status column, and change the Status back to "New". Thanks.