Ubuntu
bladerf package

bladerf 0.2023.02-2 source package in Ubuntu

Changelog

bladerf (0.2023.02-2) unstable; urgency=medium

  * Use pybuild for building the Python3 bindings to avoid Internet access
    using patch from Ubuntu, thanks! (Closes: #1050943)

 -- A. Maitland Bottoms <email address hidden>  Sat, 23 Sep 2023 22:34:49 -0400

Upload details

Uploaded by:
A. Maitland Bottoms
Uploaded to:
Sid
Original maintainer:
A. Maitland Bottoms
Architectures:
any all
Section:
misc
Urgency:
Medium Urgency

See full publishing history Publishing

Series Pocket Published Component Section
Mantic release universe misc

Downloads

File Size SHA-256 Checksum
bladerf_0.2023.02-2.dsc 3.1 KiB 5894a5a8e23cfb1c9c7a833f13d699288c0cbe32f19af0c05e478e9505107abd
bladerf_0.2023.02.orig-drivers.tar.xz 11.1 MiB 38a620bd952f0e3debf10f6991a80adfdf4fc651a51d08463f64790efa1b0c31
bladerf_0.2023.02.orig.tar.gz 2.2 MiB 3bbac54ad7d6e35be31eb12393be5e7102a070fb1ddc176992d64a6a623670c7
bladerf_0.2023.02-2.debian.tar.xz 53.8 KiB 782234e94d79e4489680495d07035e2c69671cd90d4fcd714ee09dfd2b082505

No changes file available.

Binary packages built by this source

bladerf: Nuand bladeRF software-defined radio device (tools)

 The Nuand bladeRF is an open-source software-defined radio (SDR) system,
 comprised of an RF transceiver, a field-programmable gate array (FPGA),
 a microcontroller driving a USB 3.0 interface, and a suite of host
 libraries and drivers to facilitate interaction with the device.
 .
 This package provides command-line tools for controlling the bladeRF.

bladerf-dbgsym: debug symbols for bladerf
bladerf-firmware-fx3: Nuand bladeRF firmware downloader (FX3)

 This empty package will, at the time of installation, download an appropriate
 firmware image for using the Nuand bladeRF with a Cypress FX3 USB
 controller. The image will be downloaded from http://Nuand.com/fx3/
 and saved to /usr/share/Nuand/bladeRF.
 .
 This bitstream will work for either the Nuand bladeRF x40 or the x115.
 .
 Note that this will not upgrade the bladeRF itself. That can be done
 with the bladeRF-cli utility.

bladerf-fpga-hostedx115: Nuand bladeRF FPGA bitstream downloader (hostedx115)

 This empty package will, at the time of installation, download an appropriate
 FPGA bitstream for using the Nuand bladeRF in a hosted (USB-controlled)
 configuration. The FPGA bitstream will be downloaded from
 http://Nuand.com/fpga/ and saved to /usr/share/Nuand/bladeRF.
 .
 This bitstream is for the bladeRF x115 with the Altera Cyclone IV
 EP4CE115 FPGA.
 .
 Note that this will not upgrade the bladeRF itself. That can be done
 with the bladeRF-cli utility.

bladerf-fpga-hostedx40: Nuand bladeRF FPGA bitstream downloader (hostedx40)

 This empty package will, at the time of installation, download an appropriate
 FPGA bitstream for using the Nuand bladeRF in a hosted (USB-controlled)
 configuration. The FPGA bitstream will be downloaded from
 http://Nuand.com/fpga/ and saved to /usr/share/Nuand/bladeRF.
 .
 This bitstream is for the bladeRF x40 with the Altera Cyclone IV
 EP4CE40 FPGA.
 .
 Note that this will not upgrade the bladeRF itself. That can be done
 with the bladeRF-cli utility.

bladerf-fpga-hostedxa4: Nuand bladeRF FPGA bitstream downloader (hostedxA4)

 This empty package will, at the time of installation, download an appropriate
 FPGA bitstream for using the Nuand bladeRF in a hosted (USB-controlled)
 configuration. The FPGA bitstream will be downloaded from
 https://nuand.com/fpga/ and saved to /usr/share/Nuand/bladeRF.
 .
 This bitstream is for the bladeRF 2.0 Micro xA4 with the Altera Cyclone V
 5CEBA4 FPGA.
 .
 Note that this will not upgrade the bladeRF itself. That can be done
 with the bladeRF-cli utility.

bladerf-fpga-hostedxa5: Nuand bladeRF FPGA bitstream downloader (hostedxA5)

 This empty package will, at the time of installation, download an appropriate
 FPGA bitstream for using the Nuand bladeRF in a hosted (USB-controlled)
 configuration. The FPGA bitstream will be downloaded from
 https://nuand.com/fpga/ and saved to /usr/share/Nuand/bladeRF.
 .
 This bitstream is for the bladeRF 2.0 Micro xA5 with the Altera Cyclone V
 77KLE FPGA
 .
 Note that this will not upgrade the bladeRF itself. That can be done
 with the bladeRF-cli utility.

bladerf-fpga-hostedxa9: Nuand bladeRF FPGA bitstream downloader (hostedxA9)

 This empty package will, at the time of installation, download an appropriate
 FPGA bitstream for using the Nuand bladeRF in a hosted (USB-controlled)
 configuration. The FPGA bitstream will be downloaded from
 https://nuand.com/fpga/ and saved to /usr/share/Nuand/bladeRF.
 .
 This bitstream is for the bladeRF 2.0 Micro xA9 with the Altera Cyclone V
 5CEBA9 FPGA.
 .
 Note that this will not upgrade the bladeRF itself. That can be done
 with the bladeRF-cli utility.

libbladerf-dev: Nuand bladeRF software-defined radio device (header files)

 The Nuand bladeRF is an open-source software-defined radio (SDR) system,
 comprised of an RF transceiver, a field-programmable gate array (FPGA),
 a microcontroller driving a USB 3.0 interface, and a suite of host
 libraries and drivers to facilitate interaction with the device.
 .
 This package contains the header files required for compiling bladeRF
 applications.

libbladerf-doc: Nuand bladeRF software-defined radio device (API documentation)

 The Nuand bladeRF is an open-source software-defined radio (SDR) system,
 comprised of an RF transceiver, a field-programmable gate array (FPGA),
 a microcontroller driving a USB 3.0 interface, and a suite of host
 libraries and drivers to facilitate interaction with the device.
 .
 This package contains libbladeRF API documentation.

libbladerf2: Nuand bladeRF software-defined radio device

 The Nuand bladeRF is an open-source software-defined radio (SDR) system,
 comprised of an RF transceiver, a field-programmable gate array (FPGA),
 a microcontroller driving a USB 3.0 interface, and a suite of host
 libraries and drivers to facilitate interaction with the device.
 .
 This package provides the host library.

libbladerf2-dbgsym: debug symbols for libbladerf2
python3-bladerf: Nuand bladeRF software-defined radio device (Python)

 The Nuand bladeRF is an open-source software-defined radio (SDR) system,
 comprised of an RF transceiver, a field-programmable gate array (FPGA),
 a microcontroller driving a USB 3.0 interface, and a suite of host
 libraries and drivers to facilitate interaction with the device.
 .
 This package provides Python bindings for controlling the bladeRF.