I'm also having this problem since I upgraded to 7.04. No problems previously nor in Windows even now.
In the forum some people report that the problem solved after the last kernel update but that's not my case. I've also tried a different kernel (i386 instead of generic, ie x86x64 in my case) without joy.
I'm also having this problem since I upgraded to 7.04. No problems previously nor in Windows even now.
In the forum some people report that the problem solved after the last kernel update but that's not my case. I've also tried a different kernel (i386 instead of generic, ie x86x64 in my case) without joy.
hdparm /dev/hdc:
/dev/hdc:
IO_support = 1 (32-bit)
unmaskirq = 1 (on)
using_dma = 1 (on)
keepsettings = 0 (off)
readonly = 0 (off)
readahead = 256 (on)
HDIO_GETGEO failed: Inappropriate ioctl for device
/usr/lib/ nautilus- cd-burner/ list_cddrives
Drive:
5540 KiB/s (CD 36.9x, DVD 4.0x)
name: HL-DT-ST DVDRAM GSA-4160B
device: /dev/hdc
door: closed
type: CD-R, CD-RW, DVD-RAM, DVD-R, DVD-RW, DVD+R, DVD+R DL, DVD+RW, CD, DVD
is mounted: FALSE
max read speed: 13850 KiB/s (CD 92.3x, DVD 10.2x)
max write speed: 11080 KiB/s (CD 73.8x, DVD 8.1x)
write speeds: 11080 KiB/s (CD 73.8x, DVD 8.1x)
Media:
label: ''
type: Couldn't open media
is writable: FALSE
is appendable: FALSE
capacity: Could not be determined
size: Could not be determined
cdrecord blank=fast dev=/dev/hdc
Device type : Removable CD-ROM
Version : 0
Response Format: 2
Capabilities :
Vendor_info : 'HL-DT-ST'
Identification : 'DVDRAM GSA-4160B'
Revision : 'A300'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Using generic SCSI-3/mmc DVD-R(W) driver (mmc_mdvd).
Driver flags : SWABAUDIO BURNFREE
Supported modes: PACKET SAO
Speed set to 11080 KB/s
Starting to write CD/DVD at speed 8.0 in real BLANK mode for single session.
Last chance to quit, starting real write 0 seconds. Operation starts.
Errno: 0 (Success), blank unit scsi sendcmd: no error
CDB: A1 01 00 00 00 00 00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 10 A1 00 00 0C 30 05 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x30 Qual 0x05 (cannot write medium - incompatible format) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.001s timeout 9600s
wodim: Cannot blank disk, aborting.
wodim: Some drives do not support all blank types.
wodim: Try again with wodim blank=all.
A fix or workaround would be much appreciated.