Comment 90 for bug 420015

Hello all,
Below my status:
lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 002: ID 04b8:080f Seiko Epson Corp. Stylus Photo RX425 scanner
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 002: ID 058f:9360 Alcor Micro Corp. 8-in-1 Media Card Reader
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
I declare my printer as it:
sudo lpadmin -p RX425 -P /etc/cups/ppd/Stylus_Photo_RX420.ppd -v /dev/usbmon3
sudo chgrp lp /dev/bus/usb/003/002
sudo chmod 664 /dev/bus/usb/003/002
At this step no more errors in CUPS error logfile but no output at the printer side!
Finally I created a new printer through CUPS http://localhost:631/ (seen as a RX420 despite it is a RX425???)
then deleted the old one (RX425)
Set the new one as partaged, enabled and default one
And all is working now!
I still do not understood why, but it is ok for me as I am not an expert

lpstat -t
le programmateur s’exécute
destination système par défaut : EPSON_Stylus_Photo_RX420
périphérique pour EPSON_Stylus_Photo_RX420 : usb://EPSON/Stylus%20Photo%20RX420?serial=LJ2030412222119500&i nterface=1
EPSON_Stylus_Photo_RX420 acceptant des requêtes depuis lun. 28 sept. 2009 18:21:33 CEST
l’imprimante EPSON_Stylus_Photo_RX420 est inactive, mais activée depuis lun. 28 sept. 2009 18:21:33 CEST
Finished page 1...