Change log for eeepc-acpi-scripts package in Ubuntu
| 1 → 11 of 11 results | First • Previous • Next • Last |
eeepc-acpi-scripts (1.1.10) unstable; urgency=low
* Fn-Space and the S.H.E. button are the same, and only generate a hotkey
event. Ensure that this isn't ignored. (Closes: #566707)
* Bump standards version to 3.8.4; no changes needed.
-- Ubuntu Archive Auto-Sync <email address hidden> Sun, 09 May 2010 13:47:27 +0100
Available diffs
- diff from 1.1.9 to 1.1.10 (1.1 KiB)
eeepc-acpi-scripts (1.1.9) unstable; urgency=low
* suspend.sh: fix the check for a running /sbin/shutdown
Thanks to Darren Salt.
Available diffs
- diff from 1.1.6 to 1.1.9 (4.1 KiB)
eeepc-acpi-scripts (1.1.6) unstable; urgency=low
* Add support for ACPI button/* and video/* events. (Closes: #562166)
- It is possible that only these will be reported, but it is also
possible that both these and hotkey events will be reported; and there
are keys for which only hotkey events are reported (it is expected
that this will change).
- This is incomplete: no known button or video events for Fn-F3 & Fn-F7.
- There is one button/* event which is reported for two different keys,
fortunately on different models. Disambiguation is done via the
product name (requires DMI support, which is normally enabled).
* Add support for the S.H.E. button on some models, e.g. 1002HA.
- This is incomplete: no known button event.
* Have the audio keys affect the 'Master' mixer control by default. This
has a side effect: the 'Beep' control is effectively muted when 'Master'
is muted.
* Fix bugs which prevent touchpad toggling from working (synclient has
lost -s at some point), and don't report anything if toggling failed.
-- Ubuntu Archive Auto-Sync <email address hidden> Mon, 18 Jan 2010 07:30:22 +0000
Available diffs
- diff from 1.1.5 to 1.1.6 (3.1 KiB)
eeepc-acpi-scripts (1.1.5) unstable; urgency=high
[ Darren Salt ]
* Fix Super Hybrid Engine support breakage in 1.1.4.
A missing "[" caused the AC-adaptor-unplugged code to fail; consequently,
the preferred running-on-battery mode (the default being underclocked)
would not be selected.
* Set urgency=high (for documentation reasons; due to 1.1.4).
* Add myself to Uploaders.
[ Damyan Ivanov ]
* add DMUA flag
* rules: add small test suite for all shell scripts
Available diffs
- diff from 1.1.3 to 1.1.5 (2.3 KiB)
eeepc-acpi-scripts (1.1.3) unstable; urgency=low
[ Darren Salt ]
* Init script fixups for when /etc/default/eeepc-acpi-scripts is missing;
ensure that we default to "automatic" for our S.H.E. handling.
* Belatedly bump acpid version requirement. (Closes: #550119)
* Bring the copyright file up to date.
* Allow setting of whether the super hybrid engine control defaults to
manual or auto.
* Strip out comments from /etc/default/eeepc-acpi-scripts and store a
fully-commented copy in /usr/share/doc/eeepc-acpi-scripts/examples/.
* Add configuration support for Fn-F4 on 10" models. No action is defined.
* Make VGA toggling into a bindable function.
* Fix a bug which prevented touchpad toggling from working properly.
[ Damyan Ivanov ]
* rules: call dh_installinit with -u'start 20 S .' to prevent
installing stop init.d symlinks as eeepc-acpi-scripts init.d script
doesn't need to be run during system shutdown
* postinst: remove and re-install rc.d configuration
fixing insserv warning about discrepancy between LSB init.d headers and
the real situation. Thanks to Paul Menzel for reporting and Raphael
Geissert for the fix.
* hotkey.sh/wireless.sh/functions.sh: wake up wicd on switching WiFi on
* Standards-Version: 3.8.3 (no changes necessary)
[ Andreas Schreiner ]
* Fix WLAN toggle using fn-F2 on EeePC 900A. This EeePC model needs to
load the pciehp kernel module with the pciehp_force=1 option up to kernel
version 2.6.32. /etc/init.d/eeepc-acpi-script now checks if it is running
on a 900A and loads the module accordingly.
-- Ubuntu Archive Auto-Sync <email address hidden> Mon, 14 Dec 2009 18:46:09 +0000
Available diffs
- diff from 1.1.2 to 1.1.3 (7.2 KiB)
eeepc-acpi-scripts (1.1.2) unstable; urgency=low
[ Darren Salt ]
* Add support for the 'super hybrid engine', which is accessible in kernel
2.6.30-rc7 and later, and allow for automatic upclocking when on AC and
downclocking when on battery (default is fastest/slowest).
* Add an option for preferring to use the 'Master' control for volume
control & muting. Off by default; normally takes effect while booting.
* Don't run the init script on installation or upgrade; just while
booting. This avoids altering current settings.
* Make touchpad toggling into a bindable function.
* Blacklist i2c_i801 (not needed, causes a long boot delay).
[ Thiemo Nagel ]
* Add support for GSM (3G) toggling, automatically chosing between rfkill
and USB methods.
* spelling fix in the default file
* fix actions/wireless.sh usage message
[ Damyan Ivanov ]
* functions.sh: run screensaver-command as the logged in user
[ Alan Jenkins ]
* Remove old hacks for wireless toggle key
There is no need to load/unload modules and ifconfig up/down the wireless
interface. PCI hotplug takes care of it.
Available diffs
- diff from 1.1.0 to 1.1.2 (11.4 KiB)
eeepc-acpi-scripts (1.1.0) unstable; urgency=low
[ Darren Salt ]
* Detect who's running an X session by looking for a controlling process
with DISPLAY set in its environment.
This has a useful side effect: status changes can be displayed even when
the controlling process is a login manager.
* Try to use rfkill when toggling wireless & bluetooth.
* Ignore events when shutting down or rebooting.
* Give immediate indication of pressing of Fn-F2.
* The same ACPI key codes may be used for wireless on as well as off.
* Allow reporting via OSD of brightness changes. (Closes: #501577)
* Tweaked notifications a bit:
- Replaced the heuristic for determining which should be fast
notifications with an extra parameter.
- Fast notifications stay around for a bit longer.
* Made the volume stepping configurable, and set the default to 3.125%
(which is 2dB for LineOut on at least ALC269 and ALC662).
* Blacklist some ALSA volume controls; we want to alter only one of them.
(Tested on ALC269 (901) and ALC662 (701).)
* Cache audio control names etc. to avoid need to detect them every time
the volume level is changed.
* Enable audio power saving, defaulting to a 5-second delay before
powering down. (snd_hda_intel power_save in /etc/modprobe.d/eeepc)
* When locking the display, if all else fails, try xtrlock.
* Prepare for netlink-enabled acpid: ignore lid-open events and handle
differently-reported hotkey events.
* Use an init script to load pciehp (if needed) and rfkill-input (if
available; we rely on it if the kernel is 2.6.29 or newer).
[ Raphael Geissert ]
* Auto detect the playback devices and the playback switches
Closes: #513552 -- Please auto detect the sound devices
[ Ben Armstrong ]
* Support ath5k wifi toggling and default to using it if ath_pci is not
present.
* Fix detection of rfkill on systems that don't have it.
[ Damyan Ivanov ]
* rename etc/modprobe.d/eeepc to eeepc.conf, adapting to modprobe requirement
Closes: #518573
* Standards-Version: 3.8.1 (no changes needed)
* stop saving/restoring brightness on suspend
Available diffs
- diff from 1.0.10 to 1.1.0 (11.0 KiB)
eeepc-acpi-scripts (1.0.10) unstable; urgency=low
* add missing "--user $user" to dcop invocation.
really closes: #499544
Available diffs
- diff from 1.0.4 to 1.0.10 (8.7 KiB)
eeepc-acpi-scripts (1.0.4) unstable; urgency=low
* add support for the new locations of wireless and brightness control files
for 2.6.26 kernels. Closes: 488412. Thanks to Astrid S. de Wijn.
-- Ubuntu Archive Auto-Sync <email address hidden> Fri, 04 Jul 2008 08:43:52 +0100
Available diffs
- diff from 1.0.3 to 1.0.4 (672 bytes)
eeepc-acpi-scripts (1.0.3) unstable; urgency=low
[ Nico Golde]
* Add sleep after loading ath_pci to prevent ifconfig failing
because the interface is not already up (Closes: #485236).
[ Ben Armstrong ]
* lid.sh, lid: only suspend if a power manager is not present,
otherwise let the power manager handle it.
* Fix regex for display detection in hotkey.sh.
-- Ubuntu Archive Auto-Sync <email address hidden> Thu, 19 Jun 2008 13:22:58 +0100
Available diffs
- diff from 1.0.2 to 1.0.3 (1.2 KiB)
eeepc-acpi-scripts (1.0.2) unstable; urgency=low
* suspend.sh: fix detection of running shutdown.
The code in 1.0.1 could wrongly decide that shutdown is running,
cancelling the suspend, possibly leading to overheating if one had closed
the lid and put the eee in its bag
* add myself to Uploaders
| 1 → 11 of 11 results | First • Previous • Next • Last |
