libvirt 0.9.1-1ubuntu1 source package in Ubuntu

Changelog

libvirt (0.9.1-1ubuntu1) oneiric; urgency=low

  * Resynchronize and merge from Debian unstable (LP: #794378). Remaining
    changes:
    - debian/control:
      * set X-Python-Version to 2.7, as 2.6 is not in oneiric.
      * set ubuntu maintainer
      * Build-Depends:
        - remove [linux-any] from all dependencies
        - remove [!linux-any] deps
        - swap libxen to libxen3, qemu to qemu-kvm, and open-iscsi to
          open-iscsi-utils in Build-Depends
        - remove virtualbox-ose Build-Depends
        - add parted and libapparmor-dev Build-Depends
      * convert Vcs-Git to Xs-Debian-Vcs-Git
      * libvirt-bin Depends: move netcat-openbsd, bridge-utils, dnsmasq-base
        (>= 2.46-1), and iptables from Recommends to Depends
      * libvirt-bin Recommends: move qemu to Suggests
      * libvirt-bin Suggests: add apparmor
      * libvirt0 Recommands: move lvm2 to Suggests
    - keep debian/libvirt-bin.apport
    - keep debian/libvirt-bin.cron.daily
    - debian/libvirt-bin.dirs:
      * add apparmor, cron.daily, and apport dirs
    - debian/libvirt-bin.examples:
      * add debian/libvirt-suspendonreboot
    - debian/libvirt-bin.install:
      * add /etc/apparmor.d files
      * add apport hook
    - debian/libvirt-bin.manpages:
      * add debian/libvirt-migrate-qemu-disks.1
    - debian/libvirt-bin.postinst:
      * replace libvirt groupname with libvirtd
      * add each admin user to libvirtd group
      * call apparmor_parser on usr.sbin.libvirtd and
        usr.lib.libvirt.virt-aa-helper
      * call 'libvirt-migrate-qemu-disks -a' after
        libvirt-bin has started if migrating from
        older than 0.8.3-1ubuntu1
    - debian/libvirt-bin.postrm:
      * replace libvirt groupname with libvirtd
      * remove usr.sbin.libvirtd and
        usr.lib.libvirt.virt-aa-helper
    - keep added files under debian/:
      * libvirt-bin.upstart
      * libvirt-migrate-qemu-disks
      * libvirt-migrate-qemu-disks.1
      * libvirt-suspendonreboot
      * apparmor profiles
    - debian/README.Debian:
      * add 'Apparmor Profile' section
      * add 'Disk migration' section
    - debian/rules:
      * move include of debhelper.mk to top of file so DEB_HOST_ARCH_OS
        is defined.
      * don't build with vbox since virtualbox-ose is in universe
        - remove WITH_VBOX, add explicit --without-vbox
      * add --with-apparmor to DEB_CONFIGURE_EXTRA_FLAGS
      * set DEB_DH_INSTALLINIT_ARGS to '--upstart-only'
      * remove unneeded binary-install/libvirt-bin:: and clean::
        sections (they only deal with sysvinit stuff)
      * add build/libvirt-bin:: section to install
        - apparmor files
        - apport hooks
        - libvirt-migrate-qemu-disks
  * debian/patches/series:
    - don't apply Disable-CHECKSUM-rule.patch: our iptables can do this
    - don't apply Debian-specific Debianize-libvirt-guests.patch (sysvinit only)
    - don't apply Disable qemu-disable-network.diff.patch
  * debian/patches:
    - drop 9007-fix-daemon-conf-ftbfs.patch (looks like it may be fixed)
    - drop patches applied upstream:
      * 9022-drop-booton-when-kernel-specified.patch
      * 9023-fix-lxc-console-hangup.patch
      * 9024-fix-broken-commandtest.patch
      * 9025-Pass-virSecurityManagerPtr-to-virSecurityDAC-Set-Res.patch
      * 9026-security-avoid-memory-leak.patch
      * 9027-CVE-2011-1146.patch
    - keep patches:
      * 9000-delayed_iff_up_bridge.patch
      * 9001-dont_clobber_existing_bridges.patch
      * 9002-better_default_uri_virsh.patch
      * 9003-better-default-arch.patch
      * 9004-libvirtd-group-name.patch
      * 9005-increase-unix-socket-timeout.patch
      * 9006-default-config-test-case.patch
      * 9011-move-ebtables-script.patch (refreshed)
      * 9014-skip-nodeinfotest.patch (modified to make it apply)
      * 9020-lp545795.patch (modified to make it still apply)
      * 9021-fix-uint64_t.patch
      * 9022-allows-lxc-containers-with-lxcguest.patch (renamed, modified
        to make it still apply, and added DEP-3 tags).
    - new patches:
      * 9023-disable-test-poll.patch - don't run broken test-poll

libvirt (0.9.1-1) unstable; urgency=low

  * [1546b8c] New upstream version 0.9.1
  * [2418ebf] Rediff patches
  * [d4e2b71] Drop Make-sure-DNSMASQ_STATE_DIR-exists.patch: applied upstream
  * [0fef693] libvirt0: Update symbols
  * [b4ff149] Bump standards version to 3.9.2

libvirt (0.9.0-2) unstable; urgency=low

  * [3a8e07f] New patch Make-sure-DNSMASQ_STATE_DIR-exists.patch
    (Closes: #623536)

libvirt (0.9.0-1) unstable; urgency=low

  * [a91c8f6] New upstream version 0.9.0
  * [1608a8c] Drop patch Make-macros-work-as-rvalues.patch, fixed upstream
  * [85c3f78] Fix test failure caused by our libvirtd.conf changes
  * [0defeee] Fix crashes due to missing initialization of the error system
  * [0a63618] Disable daemon start test for now
  * [1c29d34] Enable testsuite
  * [cf3a26f] Build for Python 2.6 only

libvirt (0.9.0~rc2-2) experimental; urgency=low

  * [7da1fd9] New patch Make-macros-work-as-rvalues.patch fixes kFreeBSD build
  * [08c4915] Add support for kFreeBSD (Closes: #612238)

libvirt (0.9.0~rc2-1) experimental; urgency=low

  * [77fc1c5] New upstream version 0.9.0~rc2
  * [30ceba5] Drop superflous build-dep on dpkg-dev.
    The affected versions are neither in Lenny, Squeeze nor Sid.
  * [5845bed] Switch to dh_python2 (Closes: #616874)

libvirt (0.9.0~rc1-1) experimental; urgency=low

  * [02daf0b] New upstream version 0.9.0~rc1
  * [b4a05a1] Update patches. Drop patches applied upstream:
        Do-not-add-drive-boot-on-param-when-a-kernel-is-spec.patch
        Don-t-pass-empty-arguments-to-dnsmasq.patch
        Make-sure-the-rundir-is-accessible-by-the-user.patch
        upstream/Add-missing-checks-for-read-only-connections.patch
  * [7ff8e58] Update symbols for 0.9.0~rc1

libvirt (0.8.8-3) unstable; urgency=low

  * [28df435] Don't create the rundir in the init script. The daemon does this
    now.
  * [7302aff] New patch Make-sure-the-rundir-is-accessible-by-the-user.patch.
    Make sure the rundir is accessible by the user (Closes: #614210)
  * [6dde59d] Recommend dmidecode used by the qemu driver
  * [235f893]  Add missing checks for read only connections.
    As pointed on CVE-2011-1146, some API forgot to check the read-only
    status of the connection for entry point which modify the state
    of the system or may lead to a remote execution using user data.
    The entry points concerned are:
      - virConnectDomainXMLToNative
      - virNodeDeviceDettach
      - virNodeDeviceReAttach
      - virNodeDeviceReset
      - virDomainRevertToSnapshot
      - virDomainSnapshotDelete
     src/libvirt.c: fix the above set of entry points to error on read-only
     connections (Closes: #617773)

libvirt (0.8.8-2) unstable; urgency=low

  * [f5fa0d3] initscript: depend on $local_fs (Closes: #616162)
  * [f503698] README.Debian: Mention netcat.openbsd. Thanks to Luca Capello
    for the patch.
  * [9d1ceb0] New patch:
        Do-not-add-drive-boot-on-param-when-a-kernel-is-spec.patch.
    Do not add drive 'boot=on' param when a kernel is specified
    Thanks to Jim Fehlig and Wolfgang Frisch (Closes: #615013)
 -- Serge Hallyn <email address hidden>   Wed, 11 May 2011 12:29:51 -0500

Upload details

Uploaded by:
Serge Hallyn on 2011-06-09
Sponsored by:
Jamie Strandboge
Uploaded to:
Oneiric
Original maintainer:
Ubuntu Developers
Architectures:
any
Section:
devel
Urgency:
Low Urgency

See full publishing history Publishing

Series Pocket Published Component Section

Downloads

File Size SHA-256 Checksum
libvirt_0.9.1.orig.tar.gz 14.5 MiB 02b3423bb188a4a904eac3ee5cb698a55f5172e4d0ac62cbbcb9245a121b7b2b
libvirt_0.9.1-1ubuntu1.debian.tar.gz 61.1 KiB e4c61b021601b650f81ab22edd20a6f36cda64f9187072db78e24ef6f79651ae
libvirt_0.9.1-1ubuntu1.dsc 2.5 KiB a7dd55e67df468ccc4a414c93eee5feef16ba82b1dc55f1f2f3658993bf11cec

Available diffs

View changes file

Binary packages built by this source

libvirt-bin: No summary available for libvirt-bin in ubuntu oneiric.

No description available for libvirt-bin in ubuntu oneiric.

libvirt-dev: No summary available for libvirt-dev in ubuntu oneiric.

No description available for libvirt-dev in ubuntu oneiric.

libvirt-doc: No summary available for libvirt-doc in ubuntu oneiric.

No description available for libvirt-doc in ubuntu oneiric.

libvirt0: No summary available for libvirt0 in ubuntu oneiric.

No description available for libvirt0 in ubuntu oneiric.

libvirt0-dbg: No summary available for libvirt0-dbg in ubuntu oneiric.

No description available for libvirt0-dbg in ubuntu oneiric.

python-libvirt: No summary available for python-libvirt in ubuntu oneiric.

No description available for python-libvirt in ubuntu oneiric.