linux-raspi 5.15.0-1002.2 source package in Ubuntu

Changelog

linux-raspi (5.15.0-1002.2) jammy; urgency=medium

  * jammy/linux-raspi: 5.15.0-1002.2 -proposed tracker (LP: #1958834)

  * Packaging resync (LP: #1786013)
    - [Packaging] update Ubuntu.md
    - debian/dkms-versions -- update from kernel-versions (main/master)

  * Kernel fails to boot in ScalingStack (LP: #1959102)
    - [Config] raspi: Set VIRTIO_PCI=m
    - [Config] raspi: Set ACPI=y

  * jammy/linux-raspi: Update to upstream raspberrypi rpi-5.15.y (2022-01-24)
    (LP: #1958854)
    - brcmfmac: firmware: Fix crash in brcm_alt_fw_path
    - ARM: dts: Remove VL805 USB node from CM4 dts
    - mfd: simple-mfd-i2c: Add configuration for RPi POE HAT
    - pwm: raspberrypi-poe: Add option of being created by MFD or FW
    - power: rpi-poe: Drop CURRENT_AVG as it is not hardware averaged
    - power: rpi-poe: Add option of being created by MFD or FW
    - defconfigs: Add MFD_RASPBERRYPI_POE_HAT to Pi defconfigs.
    - dtoverlays: Add option for PoE HAT to use Linux I2C instead of FW.
    - drivers: bcm2835_unicam: Disable trigger mode operation
    - arm: Remove spurious .fnend directive
    - drm/vc4: Fix deadlock on DSI device attach error
    - drm/vc4: dsi: Correct max divider to 255 (not 7)
    - defconfig: Add BACKLIGHT_PWM to bcm2709 and bcmrpi defconfigs
    - dtoverlays: Add pwm backlight option to vc4-kms-dpi-generic
    - dtoverlays: Correct [h|v]sync_invert config in vc4-kms-dpi-generic
    - ARM: dts: BCM2711 AON_INTR2 generates IRQ edges
    - update rpi-display-overlay.dts pins for 5.10+

  [ Ubuntu: 5.15.0-18.18 ]

  * jammy/linux: 5.15.0-18.18 -proposed tracker (LP: #1958638)
  * CVE-2021-4155
    - xfs: map unwritten blocks in XFS_IOC_{ALLOC, FREE}SP just like fallocate
  * CVE-2022-0185
    - SAUCE: vfs: test that one given mount param is not larger than PAGE_SIZE
  * [UBUNTU 20.04] KVM hardware diagnose data improvements for guest kernel -
    kernel part (LP: #1953334)
    - KVM: s390: add debug statement for diag 318 CPNC data
  * OOB write on BPF_RINGBUF (LP: #1956585)
    - SAUCE: bpf: prevent helper argument PTR_TO_ALLOC_MEM to have offset other
      than 0
  * Miscellaneous Ubuntu changes
    - [Config] re-enable shiftfs
    - [SAUCE] shiftfs: support kernel 5.15
    - [Config] update toolchain versions
  * Miscellaneous upstream changes
    - vfs: fs_context: fix up param length parsing in legacy_parse_param

linux-raspi (5.15.0-1001.1) jammy; urgency=medium

  * Missing overlays/README (LP: #1954757)
    - SAUCE: Install overlays/README

  * dtoverlay=uart4 breaks Raspberry Pi 4B boot (LP: #1875454)
    - SAUCE: arm: dts: Add 'brcm,bcm2835-pl011' compatible for uart2-5

  * jammy/linux-raspi: Update to upstream raspberrypi rpi-5.15.y (2022-01-14)
    (LP: #1958146)
    - clk: bcm-2835: Pick the closest clock rate
    - clk: bcm-2835: Remove rounding up the dividers
    - drm/vc4: hdmi: Set a default HSM rate
    - drm/vc4: hdmi: Move the HSM clock enable to runtime_pm
    - drm/vc4: hdmi: Make sure the controller is powered in detect
    - drm/vc4: hdmi: Make sure the controller is powered up during bind
    - drm/vc4: hdmi: Rework the pre_crtc_configure error handling
    - drm/vc4: hdmi: Split the CEC disable / enable functions in two
    - drm/vc4: hdmi: Make sure the device is powered with CEC
    - drm/vc4: hdmi: Warn if we access the controller while disabled
    - drm/vc4: crtc: Make sure the HDMI controller is powered when disabling
    - drm/vc4: crtc: Drop feed_txp from state
    - drm/vc4: Fix non-blocking commit getting stuck forever
    - drm/vc4: crtc: Copy assigned channel to the CRTC
    - drm/vc4: hdmi: Add a spinlock to protect register access
    - drm/vc4: hdmi: Use a mutex to prevent concurrent framework access
    - drm/vc4: hdmi: Prevent access to crtc->state outside of KMS
    - drm/vc4: hdmi: Check the device state in prepare()
    - drm/vc4: hdmi: Introduce an output_enabled flag
    - drm/vc4: hdmi: Introduce a scdc_enabled flag
    - drm/vc4: hdmi: Remove the DDC probing for status detection
    - drm/vc4: hdmi: Fix HPD GPIO detection
    - drm/vc4: Make vc4_crtc_get_encoder public
    - drm/vc4: crtc: Add encoder to vc4_crtc_config_pv prototype
    - drm/vc4: crtc: Rework the encoder retrieval code (again)
    - drm/vc4: crtc: Add some logging
    - drm/vc4: Leverage the load tracker on the BCM2711
    - drm/vc4: hdmi: Raise the maximum clock rate
    - drm/vc4: hdmi: Enable the scrambler on reconnection
    - drm/vc4: Increase the core clock based on HVS load
    - drm/vc4: select PM
    - drm/probe-helper: Create a HPD IRQ event helper for a single connector
    - drm/vc4: hdmi: Actually check for the connector status in hotplug
    - firmware: raspberrypi: Add RPI_FIRMWARE_NOTIFY_DISPLAY_DONE
    - drm/vc4: Remove conflicting framebuffers before callind bind_all
    - drm/vc4: Notify the firmware when DRM is in charge
    - arm: partially revert 702b94bff3c50542a6e4ab9a4f4cef093262fe65
    - Revert "rtc: pcf8523: properly handle oscillator stop bit"
    - Revert "staging: bcm2835-audio: Drop DT dependency"
    - Revert "spi: spidev: Fix CS polarity if GPIO descriptors are used"
    - Revert "mailbox: avoid timer start from callback"
    - Revert "Bluetooth: Always request for user confirmation for Just Works (LE
      SC)"
    - Revert "Bluetooth: Always request for user confirmation for Just Works"
    - smsx95xx: fix crimes against truesize
    - smsc95xx: Experimental: Enable turbo_mode and packetsize=2560 by default
    - Allow mac address to be set in smsc95xx
    - cgroup: Disable cgroup "memory" by default
    - Protect __release_resource against resources without parents
    - irq-bcm2836: Avoid "Invalid trigger warning"
    - irqchip: bcm2835: Add FIQ support
    - irqchip: irq-bcm2835: Add 2836 FIQ support
    - spi: spidev: Completely disable the spidev warning
    - dmaengine: bcm2835: Load driver early and support legacy API
    - rtc: Add SPI alias for pcf2123 driver
    - watchdog: bcm2835: Support setting reboot partition
    - reboot: Use power off rather than busy spinning when halt is requested
    - bcm: Make RASPBERRYPI_POWER depend on PM
    - Register the clocks early during the boot process, so that special/critical
      clocks can get enabled early on in the boot process avoiding the risk of
      disabling a clock, pll_divider or pll when a claiming driver fails to
      install propperly - maybe it needs to defer.
    - bcm2835-rng: Avoid initialising if already enabled
    - clk-bcm2835: Mark used PLLs and dividers CRITICAL
    - clk-bcm2835: Add claim-clocks property
    - clk-bcm2835: Read max core clock from firmware
    - sound: Demote deferral errors to INFO level
    - Update vfpmodule.c
    - i2c: bcm2835: Add debug support
    - irqchip: irq-bcm2836: Remove regmap and syscon use
    - lan78xx: Enable LEDs and auto-negotiation
    - amba_pl011: Don't use DT aliases for numbering
    - amba_pl011: Round input clock up
    - amba_pl011: Insert mb() for correct FIFO handling
    - amba_pl011: Add cts-event-workaround DT property
    - tty: amba-pl011: Add un/throttle support
    - tty: amba-pl011: Avoid rare write-when-full error
    - pinctrl-bcm2835: Set base to 0 give expected gpio numbering
    - Main bcm2708/bcm2709 linux port
    - Add dwc_otg driver
    - bcm2708 framebuffer driver
    - Pulled in the multi frame buffer support from the Pi3 repo
    - fbdev: add FBIOCOPYAREA ioctl
    - Speed up console framebuffer imageblit function
    - dmaengine: Add support for BCM2708
    - MMC: added alternative MMC driver
    - Adding bcm2835-sdhost driver, and an overlay to enable it
    - vc_mem: Add vc_mem driver for querying firmware memory addresses
    - Add /dev/gpiomem device for rootless user GPIO access
    - Add SMI driver
    - Add Chris Boot's i2c driver
    - char: broadcom: Add vcio module
    - firmware: bcm2835: Support ARCH_BCM270x
    - BCM2708: Add core Device Tree support
    - leds: Add the "input" trigger, for pwr_led
    - Added Device IDs for August DVB-T 205
    - Improve __copy_to_user and __copy_from_user performance
    - gpio-poweroff: Allow it to work on Raspberry Pi
    - mfd: Add Raspberry Pi Sense HAT core driver
    - Add support for all the downstream rpi sound card drivers
    - rpi_display: add backlight driver and overlay
    - bcm2835-virtgpio: Virtual GPIO driver
    - OF: DT-Overlay configfs interface
    - brcm: adds support for BCM43341 wifi
    - hci_h5: Don't send conf_req when ACTIVE
    - config: Add default configs
    - ARM64: Round-Robin dispatch IRQs between CPUs.
    - ARM64: Force hardware emulation of deprecated instructions.
    - cache: export clean and invalidate
    - AXI performance monitor driver (#2222)
    - ARM: bcm2835: Set Serial number and Revision
    - dwc-otg: FIQ: Fix "bad mode in data abort handler"
    - ARM: Activate FIQs to avoid __irq_startup warnings
    - i2c-gpio: Also set bus numbers from reg property
    - added capture_clear option to pps-gpio via dtoverlay (#2433)
    - lan78xx: Read initial EEE status from DT
    - hid: Reduce default mouse polling interval to 60Hz
    - Add ability to export gpio used by gpio-poweroff
    - firmware/raspberrypi: Notify firmware of a reboot
    - irqchip: irq-bcm2835: Calc. FIQ_START at boot-time
    - of: configfs: Use of_overlay_fdt_apply API call
    - net: lan78xx: Disable TCP Segmentation Offload (TSO)
    - brcmfmac: Re-enable firmware roaming support
    - lan78xx: Move enabling of EEE into PHY init code
    - cxd2880: CXD2880_SPI_DRV should select DVB_CXD2880 with
      MEDIA_SUBDRV_AUTOSELECT
    - firmware: raspberrypi: Add backward compatible get_throttled
    - sc16is7xx: Don't spin if no data received
    - drivers: thermal: step_wise: add support for hysteresis
    - drivers: thermal: step_wise: avoid throttling at hysteresis temperature
      after dropping below it
    - Update issue templates (#2736)
    - net: lan78xx: Support auto-downshift to 100Mb/s
    - firmware: raspberrypi: Report the fw variant during probe
    - lan78xx: Debounce link events to minimize poll storm
    - lan78xx: EEE support is now a PHY property
    - bcm2835-dma: Add support for per-channel flags
    - rtc: rv3028: Add backup switchover mode support
    - lan78xx: use default alignment for rx buffers
    - media: tc358743: Increase FIFO level to 374.
    - media: tc358743: fix connected/active CSI-2 lane reporting
    - media: tc358743: Add support for 972Mbit/s link freq.
    - media: tc358743: Check I2C succeeded during probe.
    - media: adv7180: Default to the first valid input
    - media: adv7180: Add YPrPb support for ADV7282M
    - media: videodev2: Add helper defines for printing FOURCCs
    - dt-bindings: Document BCM283x CSI2/CCP2 receiver
    - MAINTAINERS: Add entry for BCM2835 Unicam driver
    - media: tc358743: Return an appropriate colorspace from tc358743_set_fmt
    - staging: mmal-vchiq: Avoid use of bool in structures
    - staging: mmal-vchiq: Add support for event callbacks.
    - staging: vc04_services: Support sending data to MMAL ports
    - media: videobuf2: Allow exporting of a struct dmabuf
    - staging: mmal-vchiq: Fix client_component for 64 bit kernel
    - clk: clk-bcm2835: Use %zd when printing size_t
    - staging: mmal_vchiq: Add in the Bayer encoding formats
    - staging: mmal-vchiq: Update mmal_parameters.h with recently defined params
    - staging: mmal-vchiq: Free the event context for control ports
    - staging: mmal-vchiq: Fix memory leak in error path
    - w1: w1-gpio: Make GPIO an output for strong pullup
    - arm: bcm2835: Fix FIQ early ioremap
    - arm: bcm2835: DMA can only address 1GB
    - hwrng: iproc-rng200: Add BCM2838 support
    - bcmgenet: constrain max DMA burst length
    - bcmgenet: Better coalescing parameter defaults
    - net: genet: enable link energy detect powerdown for external PHYs
    - spi: bcm2835: enable shared interrupt support
    - clk-bcm2835: Don't wait for pllh lock
    - soc: bcm: bcm2835-pm: Add support for 2711.
    - clk: bcm2835: Add support for setting leaf clock rates while running.
    - clk: bcm2835: Allow reparenting leaf clocks while they're running.
    - usb: add plumbing for updating interrupt endpoint interval state
    - xhci: implement xhci_fixup_endpoint for interval adjustments
    - usbhid: call usb_fixup_endpoint after mangling intervals
    - arm: bcm2835: Add bcm2838 compatible string.
    - drm/v3d: Add support for 2711.
    - drm/v3d: Skip MMU flush if the device is currently off.
    - drm/v3d: Hook up the runtime PM ops.
    - i2c: bcm2835: Set clock-stretch timeout to 35ms
    - clk-bcm2835: Avoid null pointer exception
    - drm/v3d: HACK: gut runtime pm for now.
    - drm/v3d: Clock V3D down when not in use.
    - drivers: char: add chardev for mmap'ing the RPiVid control registers
    - hid: usb: Add device quirks for Freeway Airmouse T3 and MX3
    - Add HDMI1 facility to the driver.
    - net: bcmgenet: Workaround #2 for Pi4 Ethernet fail
    - xhci: Use more event ring segment table entries
    - configs: arm64/bcm2711: Enable V3D
    - arch/arm: Add model string to cpuinfo
    - arch/arm64: Add Revision, Serial, Model to cpuinfo
    - media: dt-bindings: Add binding for the Sony IMX219 sensor
    - v4l2: Add a Greyworld AWB mode.
    - staging: bcm2835-camera: Add greyworld AWB mode
    - drm/v3d: Delete pm_runtime support
    - ARM: bcm: Switch board, clk and pinctrl to bcm2711 compatible
    - Rename HDMI ALSA device names, check for enable state
    - dt-bindings: Add binding for the Infineon IRS1125 sensor
    - media: i2c: Add a driver for the Infineon IRS1125 depth sensor
    - drm/v3d: Suppress all but the first MMU error
    - drm/v3d: Plug dma_fence leak
    - staging: vchiq_arm: Register vcsm-cma as a platform driver
    - staging: vchiq_arm: Register bcm2835-codec as a platform driver
    - net:phy:2711 Allow ethernet LED mode to be set via device tree
    - v3d_drv: Handle missing clock more gracefully
    - v3d_gem: Kick the clock so firmware knows we are using firmware clock
      interface
    - clk-raspberrypi: Allow cpufreq driver to also adjust gpu clocks
    - clk-bcm2835: Disable v3d clock
    - staging: vchiq_arm: Set up dma ranges on child devices
    - staging: vchiq: Use the old dma controller for OF config on platform devices
    - ARM: bcm: Backport BCM2711 support from upstream
    - Initialise rpi-firmware before clk-bcm2835
    - staging: vchiq_arm: Give vchiq children DT nodes
    - pinctrl: bcm2835: Remove gpiochip on error
    - drivers: char: vcio: Use common compat header
    - video: fbdev: bcm2708_fb: Use common compat header
    - of: overlay: Correct symbol path fixups
    - dt-bindings: pci: Add DT docs for Brcmstb PCIe device
    - bcmgenet: Disable skip_umac_reset by default
    - drm/fourcc: Add packed 10bit YUV 4:2:0 format
    - media: uapi: hevc: Add scaling matrix control
    - media: uapi: hevc: Add segment address field
    - media: videodev2.h: Add a format for column YUV4:2:0 modes
    - media: dt-bindings: media: Add binding for the Raspberry PI HEVC decoder
    - staging: media: Add Raspberry Pi V4L2 H265 decoder
    - dt-bindings: clock: Add a binding for the RPi Firmware clocks
    - dt-bindings: display: vc4: hdmi: Add BCM2711 HDMI controllers bindings
    - drm: Checking of the pitch is only valid for linear formats
    - driver: char: rpivid: Remove legacy name support
    - spi: Force CS_HIGH if GPIO descriptors are used
    - driver: char: rpivid: Don't map more than wanted
    - media: bcm2835-unicam: Driver for CCP2/CSI2 camera interface
    - media: uapi: v4l2-core: Add sensor ancillary data V4L2 foucc type.
    - media: uapi: Add MEDIA_BUS_FMT_SENSOR_DATA media bus format
    - media: bcm2835-unicam: Add support for mulitple device nodes.
    - media: bcm2835-unicam: Add embedded data node.
    - media: bcm2835-unicam: Use dummy buffer if none have been queued
    - media: bcm2835-unicam: Disable event-related ioctls on metadata node
    - media: bcm2835-unicam: Add support for the FRAME_SYNC event
    - media: bcm2835-unicam: Re-fetch mbus code from subdev on a g_fmt call
    - media: uapi: v4l2-core: Add ISP statistics output V4L2 fourcc type
    - media: uapi: v4l-ctrls: Add CID base for the bcm2835-isp driver
    - staging: vchiq: Load bcm2835_isp driver from vchiq
    - bcm2835-dma: Add proper 40-bit DMA support
    - media: bcm2835-unicam: Add support for VIDIOC_[S|G]_SELECTION
    - media: bcm2835-unicam: Do not stop streaming in unicam_release
    - media: bcm2835-unicam: Fix reference counting in unicam_open
    - media: i2c: tc358743: Fix fallthrough warning
    - media: bcm2835: unicam: Fix uninitialized warning
    - video: bcm2708_fb: Disable FB if no displays found
    - dt-bindings: media: i2c: Add IMX477 CMOS sensor binding
    - media: bcm2835-unicam: Always service interrupts
    - sc16is7xx: Fix for hardware flow control
    - staging: vc04_services: mmal-vchiq: Update parameters list
    - staging:vc04_services: bcm2835-camera: Request headers with I-frame
    - media: bcm2835-unicam: Retain packing information on G_FMT
    - zswap: Defer zswap initialisation
    - media: bcm2835-unicam: change minimum number of vb2_queue buffers to 1
    - snd_bcm2835: disable HDMI audio when vc4 is used (#3640)
    - gpiolib: Don't prevent IRQ usage of output GPIOs
    - PCI: brcmstb: Add DT property to control L1SS
    - media: irs1125: Using i2c_transfer for ic2 reads
    - media: irs1125: Refactoring and debug messages
    - media: irs1125: Atomic access to imager reconfiguration
    - media: irs1125: Keep HW in sync after imager reset
    - staging: bcm2835-audio: Add missing MODULE_ALIAS
    - brcmfmac: Prefer a ccode from OTP over nvram file
    - drivers: media: Remove the downstream version of bcm2835-unicam
    - media: bcm2835-unicam: Driver for CCP2/CSI2 camera interface
    - media: bcm2835-unicam: Add support for get_mbus_config to set num lanes
    - media: bcm2835-unicam: Avoid gcc warning over {0} on endpoint
    - media: i2c: imx290: set the format before VIDIOC_SUBDEV_G_FMT is called
    - media: i2c: imx290: Add support for 74.25MHz clock
    - media: i2c: imx290: Correct range for V4L2_CID_GAIN to 0-238
    - media: i2c: imx290: Convert HMAX setting into V4L2_CID_HBLANK
    - media: i2c: imx290: Add support for V4L2_CID_VBLANK
    - media: i2c: imx290: Add exposure control to the driver.
    - media: i2c: imx290: Add H and V flip controls
    - media: dt-bindings: media: i2c: Add mono version to IMX290 bindings
    - media : i2c: imx290: Add support for the mono sensor variant.
    - media: i2c: imx290: Switch set_hmax to use imx290_write_buffered_reg
    - serial: 8250: bcm2835aux - defer if clock is zero
    - media: Add a pixel format for MIPI packed 12bit luma only.
    - media: Add a pixel format for MIPI packed 14bit luma only.
    - media: bcm2835-unicam: Add support for 12bit mono packed format
    - media: bcm2835-unicam: Add support for 14bit mono sources
    - media: bcm2835-unicam: Add support for unpacked 14bit Bayer formats
    - bcm2835-dma: Add NO_WAIT_RESP flag
    - media: i2c: imx290: Explicitly set v&h blank on mode change
    - media: i2c: imx290: Add support for g_selection to report cropping
    - media: i2c: imx290: Set the colorspace fields in the format
    - media: bcm2835-unicam: Reinstate V4L2_CAP_READWRITE in the caps
    - media: bcm2835-unicam: Ensure type is VIDEO_CAPTURE in [g|s]_selection
    - media: bcm2835: unicam: Set VPU min clock freq to 250Mhz.
    - dt-bindings: bcm2835-unicam: Update documentation with new clock params
    - leds: Add the actpwr trigger
    - bcm2835-dma: Advertise the full DMA range
    - media: bcm2835: unicam: Select MEDIA_CONTROLLER and VIDEO_V4L2_SUBDEV_API
    - staging: media: rpivid: Select MEDIA_CONTROLLER and
      MEDIA_CONTROLLER_REQUEST_API
    - media: bcm2835-unicam: Drop WARN on uing direct cache alias
    - media: i2c: tc358743: Only allow supported pixel fmts in set_fmt
    - dwc_otg: whitelist_table is now productlist_table
    - include/firmware: Add enum for RPI_FIRMWARE_FRAMEBUFFER_GET_DISPLAY_ID
    - media: i2c: Add driver for Sony IMX477 sensor
    - media: i2c: imx477: Add support for adaptive frame control
    - media: i2c: imx477: Return correct result on sensor id verification
    - media: i2c: imx477: Parse and register properties
    - media: bcm2835-unicam: Always service interrupts
    - media: bcm2835: unicam: Fix uninitialized warning
    - media: bcm2835-unicam: Fixup review comments from Hans.
    - media: bcm2835-unicam: Retain packing information on G_FMT
    - media: bcm2835-unicam: change minimum number of vb2_queue buffers to 1
    - staging/fbtft: Add support for display variants
    - brcmfmac: Increase power saving delay to 2s
    - rpivid_h265: Fix width/height typo
    - net: bcmgenet: Reset RBUF on first open
    - char: Add broadcom char drivers back to build files
    - dwc_otg: initialise sched_frame for periodic QHs that were parked
    - staging: bcm2835-camera: Replace deprecated V4L2_PIX_FMT_BGR32
    - staging: vc04_services: Add new vc-sm-cma driver
    - staging: vchiq-mmal: Add support for 14bit Bayer
    - staging: mmal-vchiq: Add monochrome image formats
    - staging: mmal-vchiq: Use vc-sm-cma to support zero copy
    - staging: vc04_services: Add a V4L2 M2M codec driver
    - bcm2835-dma: only reserve channel 0 if legacy dma driver is enabled
    - uapi: bcm2835-isp: Add bcm2835-isp uapi header file
    - staging: vc04_services: ISP: Add a more complex ISP processing component
    - gpio: Add gpio-fsm driver
    - staging: bcm2835-audio: Add disable-headphones flag
    - rpisense-fb: Set pseudo_pallete to prevent crash on fbcon takeover
    - dwc_otg: Minimise header and fix build warnings
    - rpivid_h625: Fix build warnings
    - bcm2708_fb: Fix a build warning
    - watchdog: bcm2835: Ignore params after the partition number
    - firmware: raspberrypi: Add support for tryonce reboot flag
    - phy: broadcom: split out the BCM54213PE from the BCM54210E IDs
    - phy: broadcom: Add bcm54213pe configuration
    - PCI: brcmstb: Restore initial fundamental reset
    - Input: edt-ft5x06: Poll the device if no interrupt is configured.
    - drm/panel/raspberrypi-touchscreen: Use independent I2C actions with delay.
    - drm/panel/raspberrypi-ts: Insert delay before polling for startup state
    - dt-bindings: Add compatible for BCM2711 DSI1
    - media: bcm2835-unicam: Correctly handle error propagation for stream on
    - media: bcm2835-unicam: Return early from stop_streaming() if stopped
    - media: bcm2835-unicam: Clear clock state when stopping streaming
    - PCI: brcmstb: Advertise MSI-X support
    - net: lan78xx: Ack pending PHY ints when resetting
    - media: i2c: imx477: Selection compliance fixes
    - vc-sm-cma: fixed kbuild problem
    - staging/vc04_services: Add additional unpacked raw formats
    - staging/bcm2835-codec: Add the unpacked (16bpp) raw formats
    - staging/bcm2835-codec: Log the number of excess supported formats
    - staging/bcm2835-isp: Add the unpacked (16bpp) raw formats
    - staging/bcm2835-isp: Log the number of excess supported formats
    - bcm2835-dma: Avoid losing CS flags after interrupt
    - arch/arm: Add __memset alias to memset_rpi.S
    - bcm2835-dma: Add bcm2835-dma: Add DMA_WIDE_SOURCE and DMA_WIDE_DEST flags
    - uapi: bcm2835-isp: Add colour denoise configuration
    - staging: vc04_services: ISP: Add colour denoise control
    - spi: bcm2835: Workaround/fix for zero-length transfers
    - kbuild: Silence unavoidable dtc overlay warnings
    - media: i2c: imx290: Replace V4L2_CID_GAIN with V4L2_CID_ANALOGUE_GAIN
    - media: i2c: imx290: Fix number of controls in v4l2_ctrl_handler_init
    - dt-binding: display: bcm2711-hdmi: Add CEC and hotplug interrupts
    - staging:bcm2835-camera: Fix the cherry-pick of AWB Greyworld
    - bcm2835-isp: Allow formats with different colour spaces.
    - staging: rpivid: Fix crash when CMA alloc fails
    - media: i2c: imx477: Remove auto frame length adjusting
    - media: i2c: imx477: Add very long exposure control to the driver
    - media: i2c: imx290: Fix up exposure calcuations and ranges
    - media: i2c: imx290: Handle exposure correctly when vblank changes
    - media: i2c: imx477: Fix crop height for 2028x1080 mode
    - media: i2c: imx477: Replace existing 1012x760 mode
    - media: i2c: imx477: Remove internal v4l2_mbus_framefmt from the state
    - media: i2c: imx477: Remove unused function parameter
    - media: bcm2835-unicam: Fix bug in buffer swapping logic
    - Assign crypto aliases to different AES implementation modules
    - media/v4l2_m2m: In buffered mode run jobs if either port is streaming
    - staging/bcm2835-codec: Correct logging of size_t to %zu
    - staging/bcm2835-codec: Add support for pixel aspect ratio
    - staging/bcm2835-codec: Implement additional g_selection calls for decode
    - staging/bcm2835-codec: Add VC-1 support.
    - hack: fixup bcm2835-unicam
    - media: i2c: add ov9281 driver.
    - media: i2c: ov9281: fix mclk issue when probe multiple camera.
    - media: i2c: ov9281: add enum_frame_interval function for iq tool 2.2 and
      hal3
    - media: i2c: ov9281: Fixup for recent kernel releases, and remove custom code
    - media: i2c: ov9281: Read chip ID via 2 reads
    - media: i2c: ov9281: Add support for 8 bit readout
    - media: ov9281: Add 1280x720 and 640x480 modes
    - Fixed picture line bug in all ov9281 modes
    - Added hflip and vflip controls to ov9281
    - media: ov5647: Fix return codes from ov5647_write/ov5647_read functions.
    - media: i2c: ov5647: Parse and register properties
    - clk-raspberrypi: Also support HEVC clock
    - rpivid: Request maximum hevc clock
    - staging/bcm2835-camera: Add support for DMABUFs
    - staging: fbtft: Add minipitft13 variant
    - dwc-otg: fix clang -Wignored-attributes warning
    - dwc-otg: fix clang -Wsometimes-uninitialized warning
    - dwc-otg: fix clang -Wpointer-bool-conversion warning
    - staging: vcsm-cma: Fix memory leak from not detaching dmabuf
    - clk: Introduce a clock request API
    - bcm2835-unicam: Switch to new clock api
    - rpivid: Switch to new clock api
    - rpivid: Only clk_request_done once
    - dwc_otg: fix an undeclared variable
    - drm/panel: jdi-lt070me05000: Use gpiod_set_value_cansleep
    - clk: requests: Ignore if the pointer is null
    - clk: requests: Dereference the request pointer after the check
    - staging/bcm2835-codec: Fix support for levels 4.1 and 4.2
    - staging/bcm2835-codec: Set the colourspace appropriately for RGB formats
    - staging/bcm2835-codec: Pass corrupt frame flag.
    - staging/bcm2835-camera: Add support for H264 levels 4.1 and 4.2
    - staging/bcm2835-codec: Do not update crop from S_FMT after res change
    - staging/bcm2835-isp: Fix compiler warning
    - gpio-poweroff: Remember the old poweroff handler
    - media: i2c: ov5647: Correct pixel array offset
    - media: i2c: ov5647: Correct minimum VBLANK value
    - media: i2c: ov5647: Fix v4l2-compliance failure subscribing to events
    - media: rpivid: Remove the need to have num_entry_points set
    - media: rpivid: Convert to MPLANE
    - media: rpivid: Add an enable count to irq claim Qs
    - RFC: media: Add media_request_{pin,unpin} API
    - media: rpivid: Add a Pass0 to accumulate slices and rework job finish
    - media: rpivid: Map cmd buffer directly
    - media: rpivid: Improve values returned when setting output format
    - media: rpivid: Improve stream_on/off conformance & clock setup
    - media: rpivid: Improve SPS/PPS error handling/validation
    - bcm2835: Allow compressed frames to set sizeimage (#4386)
    - media: i2c: imx477: Fix for long exposure limit calculations
    - clk: bcm2835: Pass DT node to rpi_firmware_get
    - bcm2835-pcm.c: Support multichannel audio
    - bcm2835-pcm: Fix up multichannel pcm audio
    - media: i2c: imx290: Support 60fps in 2 lane operation
    - media: i2c: imx290: Fix the pixel rate at 148.5Mpix/s
    - media: i2c: imx290: Fix clock setup register assignments
    - media: rpivid: Fix H265 aux ent reuse of the same slot
    - media: i2c: ov9281: Remove override of subdev name
    - staging: vc04_services: isp: Set the YUV420/YVU420 format stride to 64 bytes
    - Documentation: devicetree: Add documentation for imx378 sensor
    - media: i2c: imx477: Extend driver to support imx378 sensor
    - dt-bindings: clk: raspberrypi: Remove unused property
    - dt-bindings: display: vc4: Add phandle to the firmware
    - bcm2711_thermal: Don't clamp temperature at zero
    - media: bcm2835-unicam: Forward input status from subdevice
    - media: v4l2-subdev: add subdev-wide state struct
    - drm/vc4: Adopt the dma configuration from the HVS or V3D component
    - Support RPi DPI interface in mode6 for 18-bit color
    - drm/vc4: Add support for DRM_FORMAT_P030 to vc4 planes
    - drm/vc4: Add support for YUV color encodings and ranges
    - drm/vc4: Add FKMS as an acceptable node for dma ranges.
    - drm/vc4: A present but empty dmas disables audio
    - drm/vc4: Add debugfs node that dumps the current display lists
    - drm/vc4: Add all the HDMI registers into the debugfs dumps
    - drm/vc4: Add the 2711 HVS as a suitable DMA node
    - vc4_hdmi: Report that 3d/stereo is allowed
    - vc4: Clear unused infoframe packet RAM registers
    - drm/vc4: Change the default DPI format to being 18bpp, not 24.
    - vc4/drm: Avoid full hdmi audio fifo writes
    - vc4/drm: Fix source offsets with DRM_FORMAT_P030
    - vc4/drm: vc4_plane: Remove subpixel positioning check
    - vc4/kms: vc4_plane: Support 2020 colourspace for yuv planes
    - drm/vc4: hdmi: Convert to the new clock request API
    - drm/vc4: Correct pixel order for DSI0
    - drm/vc4: Register dsi0 as the correct vc4 encoder type
    - drm/vc4: Fix dsi0 interrupt support.
    - drm/vc4: Add correct stop condition to vc4_dsi_encoder_disable iteration
    - drm/atomic: Don't fixup modes that haven't been reset
    - drm/vc4: Allow DBLCLK modes even if horz timing is odd.
    - clk: Always clamp the rounded rate
    - drm/vc4: Increase the core clock based on HVS load
    - drm/vc4: hdmi: Simplify the connector state retrieval
    - drm/vc4: Fix timings for interlaced modes
    - dwc_otg: Update NetBSD usb.h header licence
    - drm/vc4: Fix margin calculations for the right/bottom edges
    - drm/vc4: Fix timings for VEC modes
    - drm/vc4: Refactor VEC TV mode setting
    - drm/vc4: Fix definition of PAL-M mode
    - drm/vc4: Add support for more analog TV standards
    - drm/vc4: Allow setting the TV norm via module parameter
    - drm/vc4: Refactor mode checking logic
    - drm/vc4: Add firmware-kms mode
    - media: i2c: imx477: Fix framerates for 1332x990 mode
    - SQUASH: fbmem: Use fallthrough keyword
    - ASoC: bcm: Compiler warnings in audioinjector-octo
    - media: i2c: tc358743: Fix compiler warning
    - ASoC: bcm: Add chipdip-dac driver
    - drm/vc4: hdmi: Unregister codec device on unbind
    - media: i2c: imx290: Add fwnode properties controls
    - media: i2c: ov9281: Add fwnode properties controls
    - media: i2c: ov7251: Add fwnode properties controls
    - media: v4l2: Remove v4l2-ctrls.c
    - media: v4l2: Add HEVC_SCALING_MATRIX attribute to v4l2-ctrl-*
    - media: rpivid: Update to compile with new hevc decode params
    - media: v4l2: Add Greyworld AWB control name
    - videodev2.h: add V4L2_CTRL_FLAG_DYNAMIC_ARRAY
    - v4l2-ctrls: add support for dynamically allocated arrays.
    - media: rpivid: Make slice ctrl dynamic
    - media: rpivid: Only create aux entries for H265 if needed
    - usb: xhci: workaround for bogus SET_DEQ_PENDING endpoint state
    - media: i2c: imx477: Allow control of on-sensor DPC
    - sound/usb: add device quirks for A4Tech FHD 1080p webcams
    - sound/usb: call usb_autopm_get_interface() for devices that should not
    - brcmfmac: Try product-specific clm_blob names first
    - staging: vchiq_arm: Add 36-bit address support
    - staging: vchiq_arm: children inherit DMA config
    - staging: vchiq_arm: Usa a DMA pool for small bulks
    - drm/vc4: Reset HDMI MISC_CONTROL register.
    - drm/vc4: Release workaround buffer and DMA in error paths and unbind
    - drm/vc4: Correct DSI divider calculations
    - drm/panel/raspberrypi-touchscreen: Avoid NULL deref if not initialised
    - drm/panel/raspberrypi-touchscreen: Initialise the bridge in prepare
    - drm/panel/raspberrypi-touchscreen: Handle I2C errors.
    - drm/panel-simple: Add a timing for the Raspberry Pi 7" panel
    - Input: edt-ft54x6: Clean up timer and workqueue on remove
    - regulator: rpi-panel: Register with a unique backlight name
    - regulator: rpi-panel: Handle I2C errors/timing to the Atmel
    - regulator: rpi-panel: Serialise operations.
    - regulator: rpi-panel: Ensure the backlight is off during probe.
    - regulator: rpi-panel: Convert to drive lines directly
    - regulator: rpi-panel: Add GPIO control for panel and touch resets
    - staging/bcm2835-codec: Change the default codec res to 32x32
    - staging/vchiq-mmal: Add buffer flags for interlaced video
    - staging/vchiq-mmal: Add parameters for interlaced video support
    - staging/bcm2835-codec: Add support for decoding interlaced streams
    - staging/bcm2835-codec: Correct ENUM_FRAMESIZES stepsize to 2
    - staging/bcm2835-codec: Return buffers to QUEUED not ERROR state
    - staging/bcm2835_codec: Log MMAL flags in hex
    - staging: bcm2835-codec: Allow custom specified strides/bytesperline.
    - staging/vchiq-mmal: Add the deinterlace image effects enums
    - staging/bcm2835_codec: Add support for image_fx to deinterlace
    - staging/bcm2835-v4l2_codec: Fix for encode selection API
    - Add Raspberry Pi PoE+ HAT support
    - configs: Add CAN_PEAK_USB=m
    - ARM: dts: Restore downstream dtbs to Makefile
    - media: rpivid: Avoid returning EINVAL to a G_FMT ioctl
    - net: phy: lan87xx: Allow more time for link detect
    - media: rpivid: Remove unused ctx state variable and defines
    - media: rpivid: Ensure IRQs have completed before uniniting context
    - staging: bcm2835-codec: Allow decode res changed before STREAMON(CAPTURE)
    - staging/bcm2835-codec: Do not send buffers to the VPU unless streaming
    - staging/mmal-vchiq: Rationalise included headers
    - staging: bcm2835-codec: Format changed should trigger drain
    - staging: bcm2835-codec: Signal the firmware to stop on all changes
    - staging/mmal-vchiq: Add module parameter to enable logging.
    - staging: bcm2835-codec: Queue flushed buffers instead of completing
    - staging: mmal-vchiq: Reset buffers_with_vpu on port_enable
    - staging: bcm2835_codec: Correct flushing code for refcounting
    - staging: bcm2835-codec: Ensure all ctrls are set on streamon
    - staging: bcm2835-codec: Add support for H&V Flips to ISP
    - overlays: add support for the MLX90640 thermal camera
    - overlays: Add generic mcp2515 overlay
    - regulator: rpi-panel: Remove get_brightness hook
    - bcm2835_smi_dev: Fix handling of word-odd lengths
    - Revert "mmc: sdhci-iproc: Fix vmmc regulators on iProc"
    - mmc: sdhci-iproc: Fix vmmc regulators (pre-bcm2711)
    - dt-bindings: media: i2c: Add IMX519 CMOS sensor binding
    - media: i2c: Add driver for IMX519 sensor
    - media: i2c: imx519: Advertise embedded data node on media pad 1
    - configs: Add CONFIG_VIDEO_IMX519=m
    - overlays: Add imx519-overlay.dts
    - dtoverlays: Add overlay for ST7735R (160x128) TinyDRM driver
    - dwc_otg: pay attention to qh->interval when rescheduling periodic queues
    - Hifiberry DAC+ADCPro DT overlay: add optional headphone amp
    - Hifiberry DAC+ADCPro: adding optional headphone amp control
    - Add module for 8111h chip used in various CM4 boards
    - drivers/gpio: Add a driver that wraps the PWM API as a GPIO controller
    - rtc: pcf85063: Always clear EXT_TEST from set_time
    - char: vcio: Rewrite as a firmware node child
    - ARM: dts: Make vcio a child of the firmware node
    - ARM: dts: bcm2835_audio missing firmware reference
    - ARM: dts: Delete vestigial vcsm node
    - config: Enable FSFS_FS_SECURITY
    - gpio: bcm-virt: Fix the get() method
    - configs: Add CONFIG_FB_SIMPLE to bcmrpi3_defconfig
    - media: i2c: imx219: Sensor should report RAW color space
    - media: i2c: imx290: Sensor should report RAW color space
    - media: i2c: imx477: Sensor should report RAW color space
    - media: i2c: imx519: Sensor should report RAW color space
    - media: i2c: ov5647: Sensor should report RAW color space
    - media: i2c: ov9281: Sensor should report RAW color space
    - vc04_services: isp: Report input node as wanting full range RAW color space
    - media/bcm2835-unicam: Parse pad numbers correctly
    - media/bcm2835-unicam: Add support for configuration via MC API
    - ARM: dts: vc4-kms-v3d: Always disable firmware HDMI
    - staging/bcm2835-camera: Add support for H264_MIN_QP, H264_MAX_QP
    - staging/bcm2835-camera: Add support for MPEG_VIDEO_FORCE_KEY_FRAME
    - ARM: dts: Add Pi Zero 2 support
    - clk-raspberrypi: Support VEC clock
    - dt: Move VEC clock to clk-raspberrypi
    - clk-bcm2835: Remove VEC clock support
    - drm/vc4: Add support for gamma on BCM2711
    - drm/vc4: Add debugfs node that dumps the vc5 gamma PWL entries
    - drm/vc4: hvs: Force modeset on gamma lut change
    - media: i2c: imx477: Add vsync trigger_mode parameter
    - drm/vc4: Relax VEC modeline requirements and add progressive mode support
    - drm/vc4: Make VEC progressive modes readily accessible
    - bcm2835-v4l2-codec: Remove advertised support of VP8
    - ARM: dts: Rename Zero 2 W DT files
    - brcmfmac: Don't promote INFO logging to ERR
    - dtoverlays: Update all image sensor overlays for Media Controller option
    - ARM: dt: Add DT nodes for the WLAN interfaces
    - brcmfmac: Read alternative firmware names from DT
    - ARM: dts: Provide WLAN firmware names for Zero 2 W
    - drm: Check whether the gamma lut has changed before updating
    - brcmfmac: Protect against reprobing
    - drm/vc4: kms: Fix return code check
    - drm/vc4: kms: Move clock request to our HVS state
    - overlays: Add fbtft overlay
    - configs: Regenerate defconfigs
    - configs: Add NTFS3 support
    - configs: Add kernel SMB3 server support
    - config: Set TCA8418 to module
    - overlays: Additional parameters for gpio-poweroff
    - configs: Add TCA6416 driver module
    - drm: Fix double free from checking if gamma lut has been updated
    - drm/vc4: Enable gamma block only when required.
    - drm/vc4: Only add gamma properties once.
    - dtoverlays: Remove i2c0mux and i20if status from edt-ft5406.dtsi
    - drm/vc4: Validate the size of the gamma_lut
    - drm/vc4: Don't try disabling SCDC on Pi0-3.
    - enable several virtual devices for hosting virtual machines
    - configs: add CONFIG_HID_PLAYSTATION=m and CONFIG_PLAYSTATION_FF=y
    - configs: add LEDS_PWM=y
    - configs: Add USB gadget support (for Zero 2 W)
    - media: i2c: ov5647: Support HFLIP and VFLIP
    - drivers: bcm2835_isp: Allow multiple users for the ISP driver.
    - drivers: bcm2835_isp: Fix div by 0 bug.
    - Pass V4L2_CID_MPEG_VIDEO_H264_MIN_QP/MAX_QP to bcm2835-v4l2-codec
    - ARM: dts: Update rpi-400 and cm4 dts to match 4-b
    - spi: spidev: Restore loading from Device Tree
    - drm/vc4: Add support for composite syncs to vc4_dpi
    - drm/vc4: Ensure vc4_hdmi doesn't use 2711 HPD registers on Pi0-3
    - ARM: dts: gpio-ranges property is now required
    - input: edt-ft5x06: Handle unreliable TOUCH_UP events
    - dtoverlays: Use edt-ft5506 for 10 points, instead of edt-ft5x06
    - staging/bcm2835-codec: bytesperline for YUV420/YVU420 needs to be 64
    - media: rpivid: remove min_buffers_needed from src queue
    - staging/bcm2835-codec: Allow a different stride alignment per role
    - drivers: bcm2835_unicam: Add logging message when a frame is dropped.
    - regulator/rpi-panel-attiny: Don't read the LCD power status
    - regulator/rpi-panel-attiny: Use two transactions for I2C read
    - input: edt-ft5x06: Only look at the number of points reported
    - drm/vc4: Move HDMI reset to pm_resume
    - clk: bcm: rpi: Add the BCM283x pixel clock.
    - dt: bcm283x: Change BCM283x HDMI to use firmware clock driver
    - Revert "Revert "overlays: vc4-kms-v3d: Change composite handling""
    - drm/panel-simple: Populate bpc when using panel-dpi
    - drm/panel-simple: When using panel-dpi, update desc
    - drm/panel-simple: Allow the bus format to be read from DT for panel-dpi
    - drm/vc4: dpi: Add option for inverting pixel clock and output enable
    - drm/vc4: dpi: Ensure a default format is selected
    - dt: bcm270x: Add GPIO defines for RGB565 DPI output modes
    - dtoverlays: Add a generic DPI panel overlay for KMS
    - xhci: quirks: add link TRB quirk for VL805
    - xhci: correct room_on_ring() for cases where there is a single segment
    - media: imx219: Advertise embedded data node on media pad 1
    - vc4/drm: Ignore vc4_hdmi->output_enabled for allowing audio (#4759)
    - ARM: dts: Create bcm2711-rpi-cm4s.dts (#4761)
    - xhci: refactor out TRBS_PER_SEGMENT define in runtime code
    - usb: xhci: add VLI_TRB_CACHE_BUG quirk
    - drm/vc4: Fix build without DRM_VC4_HDMI_CEC
    - dt: Create static regulators and clocks for camera nodes
    - dtoverlays: Convert the camera sensor overlays to use the new regs and clks.
    - media: i2c: ov5647: Add support for regulator control.
    - dtoverlays: Convert ov5647 to use the regulator framework
    - media: i2c: ov7251: Make the enable GPIO optional.
    - ARM: dts: bcm2711-cm4s Correct i2c0mux to use 0/1 and 28/29 & 2 regulators
    - dtoverlays: Add option to select camera as on CAM0 of CM
    - ASoC:ma120x0p: Increase maximum sample rate to 192KHz
    - staging/bcm2835-isp: Fix cleanup after init fail
    - drm/vc4: kms: Take old state core clock rate into account
    - drm/vc4: hvs: Store channel in variable
    - drm/vc4: hvs: Remove dlist setup duplication
    - drm/vc4: hvs: Move the dlist setup to its own function
    - drm/vc4: hvs: Ignore atomic_flush if we're disabled
    - drm/vc4: plane: Use dlist offset instead of pointer
    - drm/vc4: hvs: Create a shadow dlist
    - drm/vc4: Skip writes to disabled packet RAM
    - drm/edid: Don't clear YUV422 if using deep color
    - drm/edid: Rename drm_hdmi_avi_infoframe_colorspace to _colorimetry
    - drm/vc4: hdmi: Add full range RGB helper
    - drm/vc4: hdmi: Use full range helper in csc functions
    - drm/vc4: hdmi: Move XBAR setup to csc_setup
    - drm/vc4: hdmi: Replace CSC_CTL hardcoded value by defines
    - drm/vc4: hdmi: Define colorspace matrices
    - drm/vc4: hdmi: Change CSC callback prototype
    - drm/vc4: hdmi: Move clock validation to its own function
    - drm/vc4: hdmi: Move clock calculation into its own function
    - drm/vc4: hdmi: Take the sink maximum TMDS clock into account
    - drm/vc4: hdmi: Take bpp into account for the scrambler
    - drm/vc4: hdmi: Always try to have the highest bpc
    - drm/vc4: hdmi: Support HDMI YUV output
    - media: v4l2-ctrls: Add V4L2_CID_NOTIFY_GAINS control
    - media: v4l2-ctrls: Document V4L2_CID_NOTIFY_GAINS control
    - Extending ili9881c driver support for nwe080 panel
    - Enable ili9881 panel and pwm backlight driver by default
    - Add panel overlay for CutiePi
    - dtoverlays: Enable cam1_clock when using tc358743 or irs1125
    - uapi/v4l2-controls: Reset V4L2_CID_USER_BCM2835_ISP_BASE to same as 5.10
    - drm/vc4: hdmi: Fix HDMI monitor detection in polled mode
    - drm/vc4: hdmi: Fix no video output on DVI monitors
    - drm/vc4: Correct interrupt enable bits on hvs4
    - staging/bcm2835-codec: Fix typo
    - media: i2c: ov9281: Increase diff between VTS and max exposure
    - bcm2835-v4l2-isp: Add missing lock initialization
    - configs: Enable Azoteq IQS550/572/525
    - overlays: Add overlay for Azoteq IQS550
    - dtoverlays: Add backlight-gpio parameter to vc4-kms-dpi-generic
    - configs: add CONFIG_LEDS_TRIGGER_PATTERN=m
    - drm/vc4: Fix interrupt masking for HVS5.
    - drm/vc4: Add alpha_blend_mode property to each plane.
    - arm: Fix custom rpi __memset32 and __memset64
    - overlays: Add vl805 overlay
    - arm: Fix annoying .eh_frame section warnings
    - drm/vc4: Disable Gamma control on HVS5 due to issues writing the table
    - drm/vc4: hdmi: Fix clock value used for validating hdmi modes
    - [Config] raspi: updateconfigs after rebase to rpi-5.15.y (2022-01-14)

  * Miscellaneous Ubuntu changes
    - [Packaging] raspi: Initial import of debian.raspi from impish:linux-raspi
      (5.13.0-1014.16)
    - [Packaging] raspi: Initial version of linux-raspi for Jammy
    - SAUCE: arm: dts: Add 'brcm,bcm2835-pl011' compatible for uart0
    - SAUCE: arm: dts: Add 'brcm,bcm2835-gpio' compatible for gpio
    - SAUCE: Revert "cgroup: Disable cgroup "memory" by default"

  [ Ubuntu: 5.15.0-17.17 ]

  * jammy/linux: 5.15.0-17.17 -proposed tracker (LP: #1957809)

linux-raspi (5.15.0-1000.0) jammy; urgency=medium

  * Initial version of linux-raspi for Jammy.

 -- Juerg Haefliger <email address hidden>  Fri, 28 Jan 2022 14:42:07 +0100