linux-riscv 6.8.0-20.20.1 source package in Ubuntu

Changelog

linux-riscv (6.8.0-20.20.1) noble; urgency=medium

  * noble/linux-riscv: 6.8.0-20.20.1 -proposed tracker (LP: #2058921)

  * Packaging resync (LP: #1786013)
    - debian.riscv/dkms-versions -- update from kernel-versions (main/d2024.02.29)

  * Enable StarFive VisionFive 2 board (LP: #2013232)
    - dt-bindings: pwm: Add bindings for OpenCores PWM Controller
    - riscv: dts: starfive: jh7110: Add PWM node and pins configuration
    - SAUCE: pwm: opencores: Add PWM driver support
    - SAUCE: dt-bindings: PCI: Add PLDA XpressRICH PCIe host common properties
    - SAUCE: PCI: microchip: Move pcie-microchip-host.c to plda directory
    - SAUCE: PCI: microchip: Move PLDA IP register macros to pcie-plda.h
    - SAUCE: PCI: microchip: Add bridge_addr field to struct mc_pcie
    - SAUCE: PCI: microchip: Rename two PCIe data structures
    - SAUCE: PCI: microchip: Move PCIe host data structures to plda-pcie.h
    - SAUCE: PCI: microchip: Rename two setup functions
    - SAUCE: PCI: microchip: Change the argument of plda_pcie_setup_iomems()
    - SAUCE: PCI: microchip: Move setup functions to pcie-plda-host.c
    - SAUCE: PCI: microchip: Rename interrupt related functions
    - SAUCE: PCI: microchip: Add num_events field to struct plda_pcie_rp
    - SAUCE: PCI: microchip: Add request_event_irq() callback function
    - SAUCE: PCI: microchip: Add INTx and MSI event num to struct plda_event
    - SAUCE: PCI: microchip: Add get_events() callback and add PLDA get_event()
    - SAUCE: PCI: microchip: Add event irqchip field to host port and add PLDA
      irqchip
    - SAUCE: PCI: microchip: Move IRQ functions to pcie-plda-host.c
    - SAUCE: PCI: plda: Add event bitmap field to struct plda_pcie_rp
    - SAUCE: PCI: plda: Add host init/deinit and map bus functions
    - SAUCE: dt-bindings: PCI: Add StarFive JH7110 PCIe controller
    - SAUCE: PCI: Add PCIE_RESET_CONFIG_DEVICE_WAIT_MS waiting time value
    - SAUCE: PCI: starfive: Add JH7110 PCIe controller
    - SAUCE: PCI: starfive: Offload the NVMe timeout workaround to host drivers.
    - SAUCE: riscv: dts: starfive: add PCIe dts configuration for JH7110
    - SAUCE: clk: starfive: jh7110-sys: Fix lower rate of CPUfreq by setting PLL0
      rate to 1.5GHz
    - SAUCE: [HACK] riscv: dts: starfive: Add VisionFive 2 reserved memory node
    - SAUCE: riscv: dts: starfive: Disable JH7110 crypto peripheral
    - [Config] riscv: updateconfigs for VisionFive 2 patches

  * Enable Nezha board (LP: #1975592)
    - [Config] Enable CONFIG_REGULATOR_FIXED_VOLTAGE on riscv64
    - SAUCE: dt-bindings: pwm: Add binding for Allwinner D1/T113-S3/R329 PWM
      controller
    - SAUCE: pwm: Add Allwinner's D1/T113-S3/R329 SoCs PWM support
    - SAUCE: riscv: dts: allwinner: d1: Add pwm node
    - SAUCE: riscv: dts: allwinner: d1: Add PWM pins
    - SAUCE: mmc: sunxi-mmc: Correct the maximum segment size
    - SAUCE: riscv: dts: allwinner: d1: Add misc nodes
    - SAUCE: riscv: dts: allwinner: Keep aldo regulator on
    - SAUCE: riscv: dts: allwinner: Add button on the Nezha board
    - SAUCE: riscv: dts: allwinner: Add button on the Lichee RV Dock
    - SAUCE: dt-bindings: nvmem: Allow bit offsets greater than a byte
    - SAUCE: nvmem: core: Support reading cells with >= 8 bit offsets
    - SAUCE: regulator: dt-bindings: Add Allwinner D1 LDOs
    - SAUCE: regulator: sun20i: Add support for Allwinner D1 LDOs
    - SAUCE: regulator: sun20i: Use device_node_to_regmap()
    - SAUCE: dt-bindings: sram: sunxi-sram: Add optional regulators child
    - SAUCE: dt-bindings: thermal: sun8i: Add compatible for D1
    - SAUCE: thermal: sun8i: Document the unknown field
    - SAUCE: thermal: sun8i: Set the event type for new samples
    - SAUCE: thermal: sun8i: Ensure vref is powered
    - SAUCE: riscv: dts: allwinner: d1: Add thermal sensor and zone
    - SAUCE: riscv: dts: allwinner: d1: Hook up PWM-controlled CPU voltage
      regulators
    - SAUCE: drm/sun4i: dsi: Allow panel attach before card registration
    - SAUCE: drm/sun4i: mixer: Remove unused CMA headers
    - SAUCE: drm/sun4i: tcon: Always protect the LCD dotclock rate
    - SAUCE: drm/sun4i: tcon_top: Register reset, clock gates in probe
    - SAUCE: riscv: dts: allwinner: lichee-rv-86-panel-480p: Add panel
    - SAUCE: riscv: dts: allwinner: d1: Add HDMI pipeline
    - SAUCE: riscv: dts: allwinner: d1: Enable HDMI on supported boards
    - SAUCE: dt-bindings: display: sun4i-tcon: Add external LVDS PHY
    - SAUCE: riscv: dts: allwinner: d1: Add LVDS0 PHY
    - SAUCE: riscv: dts: allwinner: d1: Add LED controller node
    - SAUCE: riscv: dts: allwinner: d1: Add RGB LEDs to boards
    - SAUCE: ASoC: sun20i-codec: New driver for D1 internal codec
    - SAUCE: [WIP] ASoC: sun20i-codec: What is this ramp thing?
    - SAUCE: riscv: dts: allwinner: d1: Add sound cards to boards
    - SAUCE: dt-bindings: display: sun8i-a83t-dw-hdmi: Remove #phy-cells
    - SAUCE: dt-bindings: display: Add D1 HDMI compatibles
    - SAUCE: drm/sun4i: Add support for D1 HDMI
    - SAUCE: drm/sun4i: sun8i-hdmi-phy: Add support for D1 PHY
    - SAUCE: [HACK] drm/sun4i: Copy in BSP code for D1 HDMI PHY
    - SAUCE: riscv: dts: allwinner: Add Nezha and Lichee RV SPI nodes
    - SAUCE: dt-bindings: display: Add Sitronix ST7701s panel binding
    - SAUCE: drm/panel: Add driver for ST7701s DPI LCD panel
    - [Config] riscv: updateconfigs for D1 patches

  * Excessive size of kernel modules on RISC-V - modules unstripped
    (LP: #1964335)
    - SAUCE: scripts/Makefile.modinst discard-locals from modules

  * Enable Nezha board (LP: #1975592) // Enable StarFive VisionFive 2 board
    (LP: #2013232)
    - [Config] Enable CONFIG_SERIAL_8250_DW on riscv64

  * RISC-V kernel config is out of sync with other archs (LP: #1981437)
    - [Config] Sync riscv64 config with other architectures

  * Miscellaneous Ubuntu changes
    - [Config] Disable StarFive JH7100 support
    - [Config] Disable Renesas RZ/Five support
    - [Config] Disable BINFMT_FLAT for riscv64
    - [Config] Enable dead code elimination in the riscv64 linker
    - [Packaging] Create linux-riscv sameport

 -- Emil Renner Berthing <email address hidden>  Mon, 25 Mar 2024 11:42:47 +0100