1. Make sure that gcc & friends installed:
$ sudo apt-get install build-essential
2. Download and unzip the driver:
$ wget http://www.malinov.com/linux/pata_marvell-0.0.4t.tar.gz
$ tar zxfv pata_marvell-0.0.4t.tar.gz
3. Compile:
$ cd pata_marvell-0.0.4t/
$ make
If everything goes ok, you will get module called 'pata_marvell.ko'
You can load it by using 'sudo insmod pata_marvell.ko' command or copy it to "/lib/modules/`uname -r`/kernel/drivers/scsi" and add it to initramfs, so it will be loaded automatically during system boot.
Few words about installing it:
1. Make sure that gcc & friends installed: www.malinov. com/linux/ pata_marvell- 0.0.4t. tar.gz 0.0.4t. tar.gz 0.0.4t/ `uname -r`/kernel/ drivers/ scsi" and add it to initramfs, so it will be loaded automatically during system boot.
$ sudo apt-get install build-essential
2. Download and unzip the driver:
$ wget http://
$ tar zxfv pata_marvell-
3. Compile:
$ cd pata_marvell-
$ make
If everything goes ok, you will get module called 'pata_marvell.ko'
You can load it by using 'sudo insmod pata_marvell.ko' command or copy it to "/lib/modules/