Ubuntu
pulseaudio package

pulseaudio 1:8.0-0ubuntu1 source package in Ubuntu

Changelog

pulseaudio (1:8.0-0ubuntu1) xenial; urgency=medium

  * New upstream release
  * Merge from Debian experimental, remaining changes:
    - epoch (my stupid fault :S)
    - Don't ship the consolekit module, and explicitly depend on the PAM
      systemd module
    - Add a module to allow pulseaudio to use the Android audio HAL
    - Adjust gbp.conf file to point to the ubuntu branch for package builds
    - Disable module-role-cork by default
    - Load module-x11-bell in the start-pulseaudio-x11 script
    - Hide pulseaudio from startup apps dialog
    - Quit daemon if pid file is removed
    - Avoid abort when poll descriptor is 0, such as when using it with the
      audioflinger bridge, like done in ubuntu touch
    - change default rlimit_rttime value to 200 ms
    - Don't probe UCM profiles, trust that the profile writer knows what they
      are doing
    - Add card hook to allow modules to do something before a profile becomes
      active
    - Add an option to the bluez4 discovery module to set the profile
    - Allow leaving bluetooth transport running while sink and source are
      suspended.
    - Add option to module-switch-on-connect to skip abstract devices
    - Add property to module-device-restore to skip store/restore
    - Add missing fields for sink_input/source_output info struct to the vala
      bindings
    - Add example upstart job to run pulseaudio in system mode
    - Add a build/run autopkgtest for libpulse-dev
    - Drop libsoxr-dev build dep, its in universe
  * Refreshed patches, and dropped those that were applied upstream.
  * Update local shlibs file for 8.0

pulseaudio (7.99.2-1) experimental; urgency=medium

  * New upstream release candidate
  * Drop build-sys-Fix-install-order-of-libpulsecore.patch, applied
    upstream

pulseaudio (7.99.1-1) experimental; urgency=medium

  * New upstream release candidate
    - Update local shlibs file for 7.99
    - libpulsecore is now installed in the package-private directory
    - Update symbols file to add new balance functions
  * Drop pulsecore related lintian overrides
  * Drop stale pulseaudio-dev.install file
  * Drop stale lintian overrides
  * Add patch to fix install order of libpulsecore

pulseaudio (7.1-2) unstable; urgency=medium

  * Add build-depends on libsoxr-dev to enable soxr resamplers.
     Closes: #804212

 -- Luke Yelavich <email address hidden>  Wed, 10 Feb 2016 16:27:28 +1100

Upload details

Uploaded by:
Luke Yelavich
Uploaded to:
Xenial
Original maintainer:
Ubuntu Developers
Architectures:
any
Section:
sound
Urgency:
Medium Urgency

See full publishing history Publishing

Series Pocket Published Component Section

Downloads

File Size SHA-256 Checksum
pulseaudio_8.0.orig.tar.xz 1.4 MiB 690eefe28633466cfd1ab9d85ebfa9376f6b622deec6bfee5091ac9737cd1989
pulseaudio_8.0-0ubuntu1.debian.tar.xz 134.6 KiB 11ac404e2a81dd98aa1c33630a4c88f69b9a261cff31352ab5479e3ec32be232
pulseaudio_8.0-0ubuntu1.dsc 3.5 KiB a5f504774df97460558258a17bdc236136bbb972009e393e37999623a16e657c

Available diffs

View changes file

Binary packages built by this source

libpulse-dev: PulseAudio client development headers and libraries

 PulseAudio, previously known as Polypaudio, is a sound server for POSIX and
 WIN32 systems. It is a drop in replacement for the ESD sound server with
 much better latency, mixing/re-sampling quality and overall architecture.
 .
 Headers and libraries for developing applications that access a PulseAudio
 sound server via PulseAudio's native interface.

libpulse-mainloop-glib0: PulseAudio client libraries (glib support)

 PulseAudio, previously known as Polypaudio, is a sound server for POSIX and
 WIN32 systems. It is a drop in replacement for the ESD sound server with
 much better latency, mixing/re-sampling quality and overall architecture.
 .
 Client libraries used by applications that access a PulseAudio sound server
 via PulseAudio's native interface.
 .
 This package adds support for glib2 client applications.

libpulse-mainloop-glib0-dbgsym: debug symbols for package libpulse-mainloop-glib0

 PulseAudio, previously known as Polypaudio, is a sound server for POSIX and
 WIN32 systems. It is a drop in replacement for the ESD sound server with
 much better latency, mixing/re-sampling quality and overall architecture.
 .
 Client libraries used by applications that access a PulseAudio sound server
 via PulseAudio's native interface.
 .
 This package adds support for glib2 client applications.

libpulse0: PulseAudio client libraries

 PulseAudio, previously known as Polypaudio, is a sound server for POSIX and
 WIN32 systems. It is a drop in replacement for the ESD sound server with
 much better latency, mixing/re-sampling quality and overall architecture.
 .
 Client libraries used by applications that access a PulseAudio sound server
 via PulseAudio's native interface.

libpulse0-dbgsym: debug symbols for package libpulse0

 PulseAudio, previously known as Polypaudio, is a sound server for POSIX and
 WIN32 systems. It is a drop in replacement for the ESD sound server with
 much better latency, mixing/re-sampling quality and overall architecture.
 .
 Client libraries used by applications that access a PulseAudio sound server
 via PulseAudio's native interface.

libpulsedsp: PulseAudio OSS pre-load library

 PulseAudio, previously known as Polypaudio, is a sound server for POSIX and
 WIN32 systems. It is a drop in replacement for the ESD sound server with
 much better latency, mixing/re-sampling quality and overall architecture.
 .
 This package provides the pre-load library used to redirect applications
 using OSS through pulseaudio.

libpulsedsp-dbgsym: debug symbols for package libpulsedsp

 PulseAudio, previously known as Polypaudio, is a sound server for POSIX and
 WIN32 systems. It is a drop in replacement for the ESD sound server with
 much better latency, mixing/re-sampling quality and overall architecture.
 .
 This package provides the pre-load library used to redirect applications
 using OSS through pulseaudio.

pulseaudio: PulseAudio sound server

 PulseAudio, previously known as Polypaudio, is a sound server for POSIX and
 WIN32 systems. It is a drop in replacement for the ESD sound server with
 much better latency, mixing/re-sampling quality and overall architecture.
 .
 These are some of PulseAudio's features:
 .
   * High quality software mixing of multiple audio streams with support for
     more than one sink/source. May be used to combine multiple sound cards
     into one (with sample rate adjustment).
 .
   * Wide range of supported client libraries. ESD, ALSA, oss, libao and
     GStreamer client applications are supported as-is. Native PulseAudio
     plug-ins are also available for xmms and mplayer.
 .
   * Good low latency behaviour and very accurate latency measurement for
     playback and recording. Ability to fully synchronize multiple playback
     streams.
 .
   * Network transparency, allowing an application to play back or record
     audio on a different machine than the one it is running on.
 .
   * Extensible plug-in architecture with plug-ins for jackd, multicast-rtp
     lirc and avahi, just to name a few.
 .
 This package contains the daemon and basic module set.

pulseaudio-dbgsym: debug symbols for package pulseaudio

 PulseAudio, previously known as Polypaudio, is a sound server for POSIX and
 WIN32 systems. It is a drop in replacement for the ESD sound server with
 much better latency, mixing/re-sampling quality and overall architecture.
 .
 These are some of PulseAudio's features:
 .
   * High quality software mixing of multiple audio streams with support for
     more than one sink/source. May be used to combine multiple sound cards
     into one (with sample rate adjustment).
 .
   * Wide range of supported client libraries. ESD, ALSA, oss, libao and
     GStreamer client applications are supported as-is. Native PulseAudio
     plug-ins are also available for xmms and mplayer.
 .
   * Good low latency behaviour and very accurate latency measurement for
     playback and recording. Ability to fully synchronize multiple playback
     streams.
 .
   * Network transparency, allowing an application to play back or record
     audio on a different machine than the one it is running on.
 .
   * Extensible plug-in architecture with plug-ins for jackd, multicast-rtp
     lirc and avahi, just to name a few.
 .
 This package contains the daemon and basic module set.

pulseaudio-esound-compat: PulseAudio ESD compatibility layer

 PulseAudio, previously known as Polypaudio, is a sound server for POSIX and
 WIN32 systems. It is a drop in replacement for the ESD sound server with
 much better latency, mixing/re-sampling quality and overall architecture.
 .
 This package contains the ESD compatibility components used by some
 older versions of complete desktop environments, e.g., GNOME, and
 many useful applications. It enables a PulseAudio sound server to
 fully replace ESD.

pulseaudio-esound-compat-dbgsym: debug symbols for package pulseaudio-esound-compat

 PulseAudio, previously known as Polypaudio, is a sound server for POSIX and
 WIN32 systems. It is a drop in replacement for the ESD sound server with
 much better latency, mixing/re-sampling quality and overall architecture.
 .
 This package contains the ESD compatibility components used by some
 older versions of complete desktop environments, e.g., GNOME, and
 many useful applications. It enables a PulseAudio sound server to
 fully replace ESD.

pulseaudio-module-bluetooth: Bluetooth module for PulseAudio sound server

 PulseAudio, previously known as Polypaudio, is a sound server for POSIX and
 WIN32 systems. It is a drop in replacement for the ESD sound server with
 much better latency, mixing/re-sampling quality and overall architecture.
 .
 This module enables PulseAudio to work with bluetooth devices, like headset
 or audio gateway.
 .
 The module is called module-bluetooth

pulseaudio-module-bluetooth-dbgsym: debug symbols for package pulseaudio-module-bluetooth

 PulseAudio, previously known as Polypaudio, is a sound server for POSIX and
 WIN32 systems. It is a drop in replacement for the ESD sound server with
 much better latency, mixing/re-sampling quality and overall architecture.
 .
 This module enables PulseAudio to work with bluetooth devices, like headset
 or audio gateway.
 .
 The module is called module-bluetooth

pulseaudio-module-droid: Android Audio HAL module for PulseAudio sound server

 PulseAudio, previously known as Polypaudio, is a sound server for POSIX and
 WIN32 systems. It is a drop in replacement for the ESD sound server with
 much better latency, mixing/re-sampling quality and overall architecture.
 .
 This module enables PulseAudio to work on top of the Android Audio HAL.
 .
 The module is called module-droid.

pulseaudio-module-droid-dbgsym: debug symbols for package pulseaudio-module-droid

 PulseAudio, previously known as Polypaudio, is a sound server for POSIX and
 WIN32 systems. It is a drop in replacement for the ESD sound server with
 much better latency, mixing/re-sampling quality and overall architecture.
 .
 This module enables PulseAudio to work on top of the Android Audio HAL.
 .
 The module is called module-droid.

pulseaudio-module-gconf: GConf module for PulseAudio sound server

 PulseAudio, previously known as Polypaudio, is a sound server for POSIX and
 WIN32 systems. It is a drop in replacement for the ESD sound server with
 much better latency, mixing/re-sampling quality and overall architecture.
 .
 This module enables PulseAudio to store additional configuration in GConf.
 .
 The module is called module-gconf.

pulseaudio-module-gconf-dbgsym: debug symbols for package pulseaudio-module-gconf

 PulseAudio, previously known as Polypaudio, is a sound server for POSIX and
 WIN32 systems. It is a drop in replacement for the ESD sound server with
 much better latency, mixing/re-sampling quality and overall architecture.
 .
 This module enables PulseAudio to store additional configuration in GConf.
 .
 The module is called module-gconf.

pulseaudio-module-jack: jackd modules for PulseAudio sound server

 PulseAudio, previously known as Polypaudio, is a sound server for POSIX and
 WIN32 systems. It is a drop in replacement for the ESD sound server with
 much better latency, mixing/re-sampling quality and overall architecture.
 .
 These modules enables PulseAudio to connect to a jackd daemon.
 .
 The modules are called module-jack-sink, module-jack-source.

pulseaudio-module-jack-dbgsym: debug symbols for package pulseaudio-module-jack

 PulseAudio, previously known as Polypaudio, is a sound server for POSIX and
 WIN32 systems. It is a drop in replacement for the ESD sound server with
 much better latency, mixing/re-sampling quality and overall architecture.
 .
 These modules enables PulseAudio to connect to a jackd daemon.
 .
 The modules are called module-jack-sink, module-jack-source.

pulseaudio-module-lirc: lirc module for PulseAudio sound server

 PulseAudio, previously known as Polypaudio, is a sound server for POSIX and
 WIN32 systems. It is a drop in replacement for the ESD sound server with
 much better latency, mixing/re-sampling quality and overall architecture.
 .
 This module enables the volume of a PulseAudio sink to be controlled when
 buttons of an infrared remote control are pressed (through LIRC).
 .
 The module is called module-lirc.

pulseaudio-module-lirc-dbgsym: debug symbols for package pulseaudio-module-lirc

 PulseAudio, previously known as Polypaudio, is a sound server for POSIX and
 WIN32 systems. It is a drop in replacement for the ESD sound server with
 much better latency, mixing/re-sampling quality and overall architecture.
 .
 This module enables the volume of a PulseAudio sink to be controlled when
 buttons of an infrared remote control are pressed (through LIRC).
 .
 The module is called module-lirc.

pulseaudio-module-raop: RAOP module for PulseAudio sound server

 PulseAudio, previously known as Polypaudio, is a sound server for POSIX and
 WIN32 systems. It is a drop in replacement for the ESD sound server with
 much better latency, mixing/re-sampling quality and overall architecture.
 .
 This module enables PulseAudio to stream audio to an Apple Airport Express.

pulseaudio-module-raop-dbgsym: debug symbols for package pulseaudio-module-raop

 PulseAudio, previously known as Polypaudio, is a sound server for POSIX and
 WIN32 systems. It is a drop in replacement for the ESD sound server with
 much better latency, mixing/re-sampling quality and overall architecture.
 .
 This module enables PulseAudio to stream audio to an Apple Airport Express.

pulseaudio-module-trust-store: trust-store module for PulseAudio sound server

 PulseAudio, previously known as Polypaudio, is a sound server for POSIX and
 WIN32 systems. It is a drop in replacement for the ESD sound server with
 much better latency, mixing/re-sampling quality and overall architecture.
 .
 This module enables PulseAudio to use the trust-store in Ubuntu touch systems.
 .
 The module is called module-trust-store.

pulseaudio-module-trust-store-dbgsym: debug symbols for package pulseaudio-module-trust-store

 PulseAudio, previously known as Polypaudio, is a sound server for POSIX and
 WIN32 systems. It is a drop in replacement for the ESD sound server with
 much better latency, mixing/re-sampling quality and overall architecture.
 .
 This module enables PulseAudio to use the trust-store in Ubuntu touch systems.
 .
 The module is called module-trust-store.

pulseaudio-module-x11: X11 module for PulseAudio sound server

 PulseAudio, previously known as Polypaudio, is a sound server for POSIX and
 WIN32 systems. It is a drop in replacement for the ESD sound server with
 much better latency, mixing/re-sampling quality and overall architecture.
 .
 This module enables PulseAudio to publish itself as the default sound
 server to the X11 root window automatically upon startup. There is also a
 module to playback a sound file in place of the X11 bell beep.
 .
 The modules are called module-x11-publish and module-x11-bell.

pulseaudio-module-x11-dbgsym: debug symbols for package pulseaudio-module-x11

 PulseAudio, previously known as Polypaudio, is a sound server for POSIX and
 WIN32 systems. It is a drop in replacement for the ESD sound server with
 much better latency, mixing/re-sampling quality and overall architecture.
 .
 This module enables PulseAudio to publish itself as the default sound
 server to the X11 root window automatically upon startup. There is also a
 module to playback a sound file in place of the X11 bell beep.
 .
 The modules are called module-x11-publish and module-x11-bell.

pulseaudio-module-zeroconf: Zeroconf module for PulseAudio sound server

 PulseAudio, previously known as Polypaudio, is a sound server for POSIX and
 WIN32 systems. It is a drop in replacement for the ESD sound server with
 much better latency, mixing/re-sampling quality and overall architecture.
 .
 This module enables PulseAudio to publish available sinks and sources via
 zeroconf (aka. Avahi, mdns).
 .
 The module is called module-zeroconf-publish.

pulseaudio-module-zeroconf-dbgsym: debug symbols for package pulseaudio-module-zeroconf

 PulseAudio, previously known as Polypaudio, is a sound server for POSIX and
 WIN32 systems. It is a drop in replacement for the ESD sound server with
 much better latency, mixing/re-sampling quality and overall architecture.
 .
 This module enables PulseAudio to publish available sinks and sources via
 zeroconf (aka. Avahi, mdns).
 .
 The module is called module-zeroconf-publish.

pulseaudio-utils: Command line tools for the PulseAudio sound server

 PulseAudio, previously known as Polypaudio, is a sound server for POSIX and
 WIN32 systems. It is a drop in replacement for the ESD sound server with
 much better latency, mixing/re-sampling quality and overall architecture.
 .
 These tools provide command line access to various features of the
 PulseAudio sound server. Included tools are:
 .
   paplay - Playback a WAV file via a PulseAudio sink.
   pacat - Cat raw audio data to a PulseAudio sink.
   parec - Cat raw audio data from a PulseAudio source.
   pacmd - Connect to PulseAudio's built-in command line control interface.
   pactl - Send a control command to a PulseAudio server.
   padsp - /dev/dsp wrapper to transparently support OSS applications.
   pax11publish - Store/retrieve PulseAudio default server/sink/source
                  settings in the X11 root window.

pulseaudio-utils-dbgsym: debug symbols for package pulseaudio-utils

 PulseAudio, previously known as Polypaudio, is a sound server for POSIX and
 WIN32 systems. It is a drop in replacement for the ESD sound server with
 much better latency, mixing/re-sampling quality and overall architecture.
 .
 These tools provide command line access to various features of the
 PulseAudio sound server. Included tools are:
 .
   paplay - Playback a WAV file via a PulseAudio sink.
   pacat - Cat raw audio data to a PulseAudio sink.
   parec - Cat raw audio data from a PulseAudio source.
   pacmd - Connect to PulseAudio's built-in command line control interface.
   pactl - Send a control command to a PulseAudio server.
   padsp - /dev/dsp wrapper to transparently support OSS applications.
   pax11publish - Store/retrieve PulseAudio default server/sink/source
                  settings in the X11 root window.