Ubuntu
pulseaudio package

pulseaudio 1:8.0-0ubuntu3.3 source package in Ubuntu

Changelog

pulseaudio (1:8.0-0ubuntu3.3) xenial; urgency=medium

  [Luke Yelavich, Konrad Zapałowicz]
  * Fixed multiple interrelated problems with using Bluetooth audio (A2DP),
    where users would experience some combination of:
    - Bluetooth headset/speakers listed but not selectable in Sound settings
      (LP: #1283003)
    - [regression] Bluetooth audio no longer supports A2DP (stuck in HSP/HFP
      mode) (LP: #1438510)
    - [xenial] Bluetooth device doesn't play any sound in A2DP mode unless set
      to HSP/HFP first (LP: #1582213)
  * Specific patches from upstream used to address the above problems:
    - 0103-bluetooth-Add-support-for-automatic-switch-between-h.patch
    - 0104-bluetooth-Add-support-for-automatic-switch-bluez5.patch
    - 0106-bluetooth-Add-optional-heuristic-for-switching-betwe.patch
      . Backport from upstream to fix a bug in Xenial where an incorrect
        audio profile is applied for a headset connected over Bluetooth
        making using it impossible.
    - 0105-bluetooth-policy-do-A2DP-profile-restoring-a-bit-lat.patch
      . Fix a crash that happens if the BT headset is the only non-monitor
        source in the system and the last "phone" stream dies.
    - 0700-pulsecore-add-new-card-profile-hook.patch
      . Backport from upstream (commit 7b6260140149) to allow for correct
        profile selection.
    - 0701-bluetooth-bluez5-wait-for-all-profiles-to-connect.patch
      . Backport from upstream waiting for all profiles to connect before
        creating a card.

 -- Daniel van Vugt <email address hidden>  Tue, 23 May 2017 16:24:14 +0800

Upload details

Uploaded by:
Daniel van Vugt
Sponsored by:
Sebastien Bacher
Uploaded to:
Xenial
Original maintainer:
Ubuntu Developers
Architectures:
any
Section:
sound
Urgency:
Medium Urgency

See full publishing history Publishing

Series Pocket Published Component Section

Downloads

File Size SHA-256 Checksum
pulseaudio_8.0.orig.tar.xz 1.4 MiB 690eefe28633466cfd1ab9d85ebfa9376f6b622deec6bfee5091ac9737cd1989
pulseaudio_8.0-0ubuntu3.3.debian.tar.xz 144.5 KiB 9fbd17f55e9ec30811bb0b8e771a94733a8f6f0bfce8e32c59237968cf599b6a
pulseaudio_8.0-0ubuntu3.3.dsc 3.5 KiB 4ea46f2b2d171d868857606974e08c8ca4460790fba0e0961320e223e3aa66d5

View changes file

Binary packages built by this source

libpulse-dev: PulseAudio client development headers and libraries

 PulseAudio, previously known as Polypaudio, is a sound server for POSIX and
 WIN32 systems. It is a drop in replacement for the ESD sound server with
 much better latency, mixing/re-sampling quality and overall architecture.
 .
 Headers and libraries for developing applications that access a PulseAudio
 sound server via PulseAudio's native interface.

libpulse-mainloop-glib0: PulseAudio client libraries (glib support)

 PulseAudio, previously known as Polypaudio, is a sound server for POSIX and
 WIN32 systems. It is a drop in replacement for the ESD sound server with
 much better latency, mixing/re-sampling quality and overall architecture.
 .
 Client libraries used by applications that access a PulseAudio sound server
 via PulseAudio's native interface.
 .
 This package adds support for glib2 client applications.

libpulse-mainloop-glib0-dbgsym: debug symbols for package libpulse-mainloop-glib0

 PulseAudio, previously known as Polypaudio, is a sound server for POSIX and
 WIN32 systems. It is a drop in replacement for the ESD sound server with
 much better latency, mixing/re-sampling quality and overall architecture.
 .
 Client libraries used by applications that access a PulseAudio sound server
 via PulseAudio's native interface.
 .
 This package adds support for glib2 client applications.

libpulse0: PulseAudio client libraries

 PulseAudio, previously known as Polypaudio, is a sound server for POSIX and
 WIN32 systems. It is a drop in replacement for the ESD sound server with
 much better latency, mixing/re-sampling quality and overall architecture.
 .
 Client libraries used by applications that access a PulseAudio sound server
 via PulseAudio's native interface.

libpulse0-dbgsym: debug symbols for package libpulse0

 PulseAudio, previously known as Polypaudio, is a sound server for POSIX and
 WIN32 systems. It is a drop in replacement for the ESD sound server with
 much better latency, mixing/re-sampling quality and overall architecture.
 .
 Client libraries used by applications that access a PulseAudio sound server
 via PulseAudio's native interface.

libpulsedsp: PulseAudio OSS pre-load library

 PulseAudio, previously known as Polypaudio, is a sound server for POSIX and
 WIN32 systems. It is a drop in replacement for the ESD sound server with
 much better latency, mixing/re-sampling quality and overall architecture.
 .
 This package provides the pre-load library used to redirect applications
 using OSS through pulseaudio.

libpulsedsp-dbgsym: debug symbols for package libpulsedsp

 PulseAudio, previously known as Polypaudio, is a sound server for POSIX and
 WIN32 systems. It is a drop in replacement for the ESD sound server with
 much better latency, mixing/re-sampling quality and overall architecture.
 .
 This package provides the pre-load library used to redirect applications
 using OSS through pulseaudio.

pulseaudio: PulseAudio sound server

 PulseAudio, previously known as Polypaudio, is a sound server for POSIX and
 WIN32 systems. It is a drop in replacement for the ESD sound server with
 much better latency, mixing/re-sampling quality and overall architecture.
 .
 These are some of PulseAudio's features:
 .
   * High quality software mixing of multiple audio streams with support for
     more than one sink/source. May be used to combine multiple sound cards
     into one (with sample rate adjustment).
 .
   * Wide range of supported client libraries. ESD, ALSA, oss, libao and
     GStreamer client applications are supported as-is. Native PulseAudio
     plug-ins are also available for xmms and mplayer.
 .
   * Good low latency behaviour and very accurate latency measurement for
     playback and recording. Ability to fully synchronize multiple playback
     streams.
 .
   * Network transparency, allowing an application to play back or record
     audio on a different machine than the one it is running on.
 .
   * Extensible plug-in architecture with plug-ins for jackd, multicast-rtp
     lirc and avahi, just to name a few.
 .
 This package contains the daemon and basic module set.

pulseaudio-dbgsym: debug symbols for package pulseaudio

 PulseAudio, previously known as Polypaudio, is a sound server for POSIX and
 WIN32 systems. It is a drop in replacement for the ESD sound server with
 much better latency, mixing/re-sampling quality and overall architecture.
 .
 These are some of PulseAudio's features:
 .
   * High quality software mixing of multiple audio streams with support for
     more than one sink/source. May be used to combine multiple sound cards
     into one (with sample rate adjustment).
 .
   * Wide range of supported client libraries. ESD, ALSA, oss, libao and
     GStreamer client applications are supported as-is. Native PulseAudio
     plug-ins are also available for xmms and mplayer.
 .
   * Good low latency behaviour and very accurate latency measurement for
     playback and recording. Ability to fully synchronize multiple playback
     streams.
 .
   * Network transparency, allowing an application to play back or record
     audio on a different machine than the one it is running on.
 .
   * Extensible plug-in architecture with plug-ins for jackd, multicast-rtp
     lirc and avahi, just to name a few.
 .
 This package contains the daemon and basic module set.

pulseaudio-esound-compat: PulseAudio ESD compatibility layer

 PulseAudio, previously known as Polypaudio, is a sound server for POSIX and
 WIN32 systems. It is a drop in replacement for the ESD sound server with
 much better latency, mixing/re-sampling quality and overall architecture.
 .
 This package contains the ESD compatibility components used by some
 older versions of complete desktop environments, e.g., GNOME, and
 many useful applications. It enables a PulseAudio sound server to
 fully replace ESD.

pulseaudio-esound-compat-dbgsym: debug symbols for package pulseaudio-esound-compat

 PulseAudio, previously known as Polypaudio, is a sound server for POSIX and
 WIN32 systems. It is a drop in replacement for the ESD sound server with
 much better latency, mixing/re-sampling quality and overall architecture.
 .
 This package contains the ESD compatibility components used by some
 older versions of complete desktop environments, e.g., GNOME, and
 many useful applications. It enables a PulseAudio sound server to
 fully replace ESD.

pulseaudio-module-bluetooth: Bluetooth module for PulseAudio sound server

 PulseAudio, previously known as Polypaudio, is a sound server for POSIX and
 WIN32 systems. It is a drop in replacement for the ESD sound server with
 much better latency, mixing/re-sampling quality and overall architecture.
 .
 This module enables PulseAudio to work with bluetooth devices, like headset
 or audio gateway.
 .
 The module is called module-bluetooth

pulseaudio-module-bluetooth-dbgsym: debug symbols for package pulseaudio-module-bluetooth

 PulseAudio, previously known as Polypaudio, is a sound server for POSIX and
 WIN32 systems. It is a drop in replacement for the ESD sound server with
 much better latency, mixing/re-sampling quality and overall architecture.
 .
 This module enables PulseAudio to work with bluetooth devices, like headset
 or audio gateway.
 .
 The module is called module-bluetooth

pulseaudio-module-droid: Android Audio HAL module for PulseAudio sound server

 PulseAudio, previously known as Polypaudio, is a sound server for POSIX and
 WIN32 systems. It is a drop in replacement for the ESD sound server with
 much better latency, mixing/re-sampling quality and overall architecture.
 .
 This module enables PulseAudio to work on top of the Android Audio HAL.
 .
 The module is called module-droid.

pulseaudio-module-droid-dbgsym: debug symbols for package pulseaudio-module-droid

 PulseAudio, previously known as Polypaudio, is a sound server for POSIX and
 WIN32 systems. It is a drop in replacement for the ESD sound server with
 much better latency, mixing/re-sampling quality and overall architecture.
 .
 This module enables PulseAudio to work on top of the Android Audio HAL.
 .
 The module is called module-droid.

pulseaudio-module-gconf: GConf module for PulseAudio sound server

 PulseAudio, previously known as Polypaudio, is a sound server for POSIX and
 WIN32 systems. It is a drop in replacement for the ESD sound server with
 much better latency, mixing/re-sampling quality and overall architecture.
 .
 This module enables PulseAudio to store additional configuration in GConf.
 .
 The module is called module-gconf.

pulseaudio-module-gconf-dbgsym: debug symbols for package pulseaudio-module-gconf

 PulseAudio, previously known as Polypaudio, is a sound server for POSIX and
 WIN32 systems. It is a drop in replacement for the ESD sound server with
 much better latency, mixing/re-sampling quality and overall architecture.
 .
 This module enables PulseAudio to store additional configuration in GConf.
 .
 The module is called module-gconf.

pulseaudio-module-jack: jackd modules for PulseAudio sound server

 PulseAudio, previously known as Polypaudio, is a sound server for POSIX and
 WIN32 systems. It is a drop in replacement for the ESD sound server with
 much better latency, mixing/re-sampling quality and overall architecture.
 .
 These modules enables PulseAudio to connect to a jackd daemon.
 .
 The modules are called module-jack-sink, module-jack-source.

pulseaudio-module-jack-dbgsym: debug symbols for package pulseaudio-module-jack

 PulseAudio, previously known as Polypaudio, is a sound server for POSIX and
 WIN32 systems. It is a drop in replacement for the ESD sound server with
 much better latency, mixing/re-sampling quality and overall architecture.
 .
 These modules enables PulseAudio to connect to a jackd daemon.
 .
 The modules are called module-jack-sink, module-jack-source.

pulseaudio-module-lirc: lirc module for PulseAudio sound server

 PulseAudio, previously known as Polypaudio, is a sound server for POSIX and
 WIN32 systems. It is a drop in replacement for the ESD sound server with
 much better latency, mixing/re-sampling quality and overall architecture.
 .
 This module enables the volume of a PulseAudio sink to be controlled when
 buttons of an infrared remote control are pressed (through LIRC).
 .
 The module is called module-lirc.

pulseaudio-module-lirc-dbgsym: debug symbols for package pulseaudio-module-lirc

 PulseAudio, previously known as Polypaudio, is a sound server for POSIX and
 WIN32 systems. It is a drop in replacement for the ESD sound server with
 much better latency, mixing/re-sampling quality and overall architecture.
 .
 This module enables the volume of a PulseAudio sink to be controlled when
 buttons of an infrared remote control are pressed (through LIRC).
 .
 The module is called module-lirc.

pulseaudio-module-raop: RAOP module for PulseAudio sound server

 PulseAudio, previously known as Polypaudio, is a sound server for POSIX and
 WIN32 systems. It is a drop in replacement for the ESD sound server with
 much better latency, mixing/re-sampling quality and overall architecture.
 .
 This module enables PulseAudio to stream audio to an Apple Airport Express.

pulseaudio-module-raop-dbgsym: debug symbols for package pulseaudio-module-raop

 PulseAudio, previously known as Polypaudio, is a sound server for POSIX and
 WIN32 systems. It is a drop in replacement for the ESD sound server with
 much better latency, mixing/re-sampling quality and overall architecture.
 .
 This module enables PulseAudio to stream audio to an Apple Airport Express.

pulseaudio-module-trust-store: trust-store module for PulseAudio sound server

 PulseAudio, previously known as Polypaudio, is a sound server for POSIX and
 WIN32 systems. It is a drop in replacement for the ESD sound server with
 much better latency, mixing/re-sampling quality and overall architecture.
 .
 This module enables PulseAudio to use the trust-store in Ubuntu touch systems.
 .
 The module is called module-trust-store.

pulseaudio-module-trust-store-dbgsym: debug symbols for package pulseaudio-module-trust-store

 PulseAudio, previously known as Polypaudio, is a sound server for POSIX and
 WIN32 systems. It is a drop in replacement for the ESD sound server with
 much better latency, mixing/re-sampling quality and overall architecture.
 .
 This module enables PulseAudio to use the trust-store in Ubuntu touch systems.
 .
 The module is called module-trust-store.

pulseaudio-module-x11: X11 module for PulseAudio sound server

 PulseAudio, previously known as Polypaudio, is a sound server for POSIX and
 WIN32 systems. It is a drop in replacement for the ESD sound server with
 much better latency, mixing/re-sampling quality and overall architecture.
 .
 This module enables PulseAudio to publish itself as the default sound
 server to the X11 root window automatically upon startup. There is also a
 module to playback a sound file in place of the X11 bell beep.
 .
 The modules are called module-x11-publish and module-x11-bell.

pulseaudio-module-x11-dbgsym: debug symbols for package pulseaudio-module-x11

 PulseAudio, previously known as Polypaudio, is a sound server for POSIX and
 WIN32 systems. It is a drop in replacement for the ESD sound server with
 much better latency, mixing/re-sampling quality and overall architecture.
 .
 This module enables PulseAudio to publish itself as the default sound
 server to the X11 root window automatically upon startup. There is also a
 module to playback a sound file in place of the X11 bell beep.
 .
 The modules are called module-x11-publish and module-x11-bell.

pulseaudio-module-zeroconf: Zeroconf module for PulseAudio sound server

 PulseAudio, previously known as Polypaudio, is a sound server for POSIX and
 WIN32 systems. It is a drop in replacement for the ESD sound server with
 much better latency, mixing/re-sampling quality and overall architecture.
 .
 This module enables PulseAudio to publish available sinks and sources via
 zeroconf (aka. Avahi, mdns).
 .
 The module is called module-zeroconf-publish.

pulseaudio-module-zeroconf-dbgsym: debug symbols for package pulseaudio-module-zeroconf

 PulseAudio, previously known as Polypaudio, is a sound server for POSIX and
 WIN32 systems. It is a drop in replacement for the ESD sound server with
 much better latency, mixing/re-sampling quality and overall architecture.
 .
 This module enables PulseAudio to publish available sinks and sources via
 zeroconf (aka. Avahi, mdns).
 .
 The module is called module-zeroconf-publish.

pulseaudio-utils: Command line tools for the PulseAudio sound server

 PulseAudio, previously known as Polypaudio, is a sound server for POSIX and
 WIN32 systems. It is a drop in replacement for the ESD sound server with
 much better latency, mixing/re-sampling quality and overall architecture.
 .
 These tools provide command line access to various features of the
 PulseAudio sound server. Included tools are:
 .
   paplay - Playback a WAV file via a PulseAudio sink.
   pacat - Cat raw audio data to a PulseAudio sink.
   parec - Cat raw audio data from a PulseAudio source.
   pacmd - Connect to PulseAudio's built-in command line control interface.
   pactl - Send a control command to a PulseAudio server.
   padsp - /dev/dsp wrapper to transparently support OSS applications.
   pax11publish - Store/retrieve PulseAudio default server/sink/source
                  settings in the X11 root window.

pulseaudio-utils-dbgsym: debug symbols for package pulseaudio-utils

 PulseAudio, previously known as Polypaudio, is a sound server for POSIX and
 WIN32 systems. It is a drop in replacement for the ESD sound server with
 much better latency, mixing/re-sampling quality and overall architecture.
 .
 These tools provide command line access to various features of the
 PulseAudio sound server. Included tools are:
 .
   paplay - Playback a WAV file via a PulseAudio sink.
   pacat - Cat raw audio data to a PulseAudio sink.
   parec - Cat raw audio data from a PulseAudio source.
   pacmd - Connect to PulseAudio's built-in command line control interface.
   pactl - Send a control command to a PulseAudio server.
   padsp - /dev/dsp wrapper to transparently support OSS applications.
   pax11publish - Store/retrieve PulseAudio default server/sink/source
                  settings in the X11 root window.