thermald 1.7.0-5ubuntu4 source package in Ubuntu

Changelog

thermald (1.7.0-5ubuntu4) bionic; urgency=medium

  * Fix 32 bit FTBFS, upstream commit:
     - bb7631163c8f Use correct format specifier for size_t

thermald (1.7.0-5ubuntu3) bionic; urgency=medium

  * Maintain consistent power usage under high CPU load (LP: #1811730)
    - without this fix, some machines exhibit a sharp drop of power usage and
      CPU frequency upon high system loading and then takes time to slowly
      ramp up again.

thermald (1.7.0-5ubuntu2) bionic; urgency=medium

  * Honor ACPI _CRT for processor thermal zone (LP: #1803360)
    There are some new fanless platforms use DPTF's virtual sensor
    instead of INT340X devices. Because of that, the _PSV is no
    longer in use, at least not directly, hence its value may set
    higher then _CRT. To a fanless system that means no cooling
    device gets activated before _CRT, so the system will be
    considered overheated by Linux kernel, and gets shutdown by the
    kernel.  Upstream fixes:
     - 7af3eef07dc7 Ignore _TRT and B0D4 device if passive 1 UUID not present
       (prerequisite)
     - 97976782dd26 Honor ACPI _CRT for processor thermal zone

thermald (1.7.0-5ubuntu1) bionic; urgency=medium

  [ Ben Caradoc-Davies ]
  * Fix non-initialized temp_unreadable (Closes: #896132) (LP: #1765572)
    - fixes regression caused by previous fix, initialise
      temp_unreadable to restore temperature control.

thermald (1.7.0-5) unstable; urgency=medium

  * Don't continually re-read broken temperature sysfs file (LP: #1764320)
    log once that is unreadble, thereafter don't re-read as this
    will spam the log with read failure messages

thermald (1.7.0-4) unstable; urgency=medium

  * Fix global-files-wildcard-not-first-paragraph-in-dep5-copyright

thermald (1.7.0-3) unstable; urgency=medium

  * remove /etc/init/thermald.conf (Closes: #884589)
  * clean up warning: thermald source: useless-autoreconf-build-depends
    dh-autoreconf
  * Update compat from 9 to 10
  * Use debhelper >= 10

thermald (1.7.0-2) unstable; urgency=medium

  [ Bryan Quigley ]
  * Remove upstart support

  [ Colin King ]
  * Update Standards-Version to  4.1.2

thermald (1.7.0-1) unstable; urgency=medium

  * sync with latest upstream release 1.7
  * remove patches from previous release as
    they are all merged into 1.7

thermald (1.6.0-5) unstable; urgency=medium

  * Initialize lowest_valid_index to prevent SEGV
    - upstream commit 18d6ca75bbc504a

thermald (1.6.0-4) unstable; urgency=medium

  * Fix dbus re-init accessing deleted pointer
    - upstream fix 9c5d8354dd8efff340
  * Update Standards-Version to 4.0.0

thermald (1.6.0-3) unstable; urgency=medium

  * Pull in a few upstream and Ubuntu fixes:
    - remove duplicate assignment to critical_temp (minor code cleanup)
    - thd_parse: check for xmlNodeListGetString NULL returns
      fixes potential NULL ptr deference bug
    - fix typo on field name default_prefernce
    - Don't terminate thermald engine if thd_engine is null (LP: #1677427)
      fixes segfault if SIGTERM occurs during startup.

thermald (1.6.0-2) unstable; urgency=medium

  * set default preference to ENERGY_CONSERVE
   - upstream fix 37a25879239466f2d096

thermald (1.6.0-1) unstable; urgency=medium

  * sync with latest upstream release 1.6
  * include 2 minor fixes for 1.6.0 to clean up build warnings
    - thd_cdev: ensure _target_value is initialized
    - fix build warning on i386 architecture builds

thermald (1.5.4-4) unstable; urgency=medium

  * fix spamming of logs when writes file (LP: #1656528)
    - patch from  Srinivas Pandruvada at Intel, not yet mainline

thermald (1.5.4-3) unstable; urgency=medium

  * upstream fix 7f83ada8133 ("check for recv failure and ensure "
    "buffer is null terminated")
    - fixes potential buffer overrun
  * upstream fix 53154fd496a ("Remove auto adjusted max temp")
    - addresses aggressive over-throttling on some H/W (LP: #1600599)

thermald (1.5.4-2) unstable; urgency=medium

  * upstream fix 9da073098f7 ("Fix added to improve modem throttling")
    - handle crash at boot-up
    - remove dependency on ofono
    - remove hard-coding of sleep value
    - enusre throttling works fine when ofono/RIL logs enabled

thermald (1.5.4-1) unstable; urgency=medium

  * sync with latest upstream release
    - remove all debian/patches as these are now in the 1.5.4 release
    - add depends on lsb-base (>= 3.0-6)

thermald (1.5.3-3) unstable; urgency=medium

  * Minor upstream fix and add in model throttling for SoFIA-3GR:
    - thd_cdev_modem: ensure private variables in class are
      initialized.  throttling and online are not initialized, so
      set the appropriately in the constructor.
    - Added support for modem throttling on SoFIA-3GR:
      Added modem as a cooling device for PA (coretemp4) on 3GR.
      While temp would be read from sysfs device files, cooling
      would be initiated through telephony framework, via D-Bus.
      Telephony framework would notify thermald via D-Bus signals,
      any change in throttling state.
      thermald would invoke D-Bus methods in telephony framework
      ONLY to check if its supported and to change the state.

thermald (1.5.3-2) unstable; urgency=medium

  * Fix spelling mistake in thermal-conf man page (Closes: #826178)
    - change "confirms" to "conforms"

thermald (1.5.3-1) unstable; urgency=medium

  * Sync source to upstream 1.5.3 head
  * Remove debian patches that are now merged into 1.5.3
    - 0001-Initialize-bios_locked-to-false.patch
    - 0002-Regression-for-default-config-file.patch
  * Downgrade logging error (commit 8280fd7ec6cff6db6463c8a1b01d2e427e418226)
    - When there are no relationship tables present, we print error.
      This causes confusion. So downgrade error as thermald will continue
      to use its defaults.

thermald (1.5-3) unstable; urgency=medium

  * Update Standards-Version to 3.9.8
  * Fix incorrect path to thermald config file (LP: #1568123)
    - upstream commit 4a890d7e173678644882e6b863f3650e30d33052

thermald (1.5-2) unstable; urgency=medium

  * Initialise bios_locked; may lead to random behaviour (LP: #1547594)
    - bios_locked should be initialised to false so that RAPL is
      enabled by default.

thermald (1.5-1) unstable; urgency=medium

  * Sync with upstream 1.5 release
    - remove debain/patches as these are all in the upstream release now

thermald (1.4.3-6) unstable; urgency=medium

  * Fix frequency scaling issue on specific Intel CPUs (LP: #1480349)
    - roll earlier patches that allow us to cleanly patch the issue
    - Error recovery when sysfs attrib read fails
    - Remove wild card for loading
    - Move parser init to thd_engine
    - Add white list of the cpu ids

thermald (1.4.3-5) unstable; urgency=medium

  * cdev: turn some info messages to debug to reduce syslog spamming
  * cdev: RAPL: turn some info messages to debug to reduce syslog spamming

thermald (1.4.3-4) unstable; urgency=medium

  * Fix null pointer deferences with _ART active trip points (LP: #1480821)
  * Re-enable lockfile (LP:# 1480892)
  * Report multiple instances of thermald with thd_log_fatal (LP: #1432220)

thermald (1.4.3-3) unstable; urgency=medium

  * Suppress systemd failed service messages (e.g. on VMs) (LP:#1480182)

thermald (1.4.3-2) unstable; urgency=medium

  [Colin Ian King]
  * Fix typo in option --ignore-cpuid-check
  * Fix spelling mistake in man page
  * Fix spelling mistake in README
  [Martin Pitt]
  * Fix postinst

thermald (1.4.3-1) unstable; urgency=medium

  * Correct the version number
  * cthd_engine::user_delete_zone: remove unused variable zone
  * Remove unused variables
  * Use correct format specifiers for size_t type
  * Remove this_option_optind, it is not used and is redundant
  * Don't assign a value to c if we don't use it again
  * Fix type warning found by static analysis
  * Reduce printing of "skip to reduce current state .."
  * Removing several deprecated warning with new glib
  * Fix marshalling array error
  * Fix regression in exit via dbus message
  * shell script update
  * Added interface GetSensorTemperature
  * New DBUS message to get sensor temperature at a given index.

thermald (1.4.2-1) unstable; urgency=medium

  * Sync up with version 1.4.2
  * Remove 0003-Fix-Coverity-reported-issues.patch, no longer required

thermald (1.4-1) unstable; urgency=medium

  * Sync up with version 1.4

thermald (1.3-9) unstable; urgency=medium

  * Fix buffer overrun on a readlink

thermald (1.3-8) unstable; urgency=medium

  * Handle exit on H/W that does not support thermald (LP:#1325142)

thermald (1.3-7) unstable; urgency=medium

  * Remove redundant re-checking of return from read_msr()
  * Improve accuracy of unit_value calculation
  * Null terminate buffer on error return path
  * Fix resource leak on file descriptor, close fd on error return paths

thermald (1.3-6) unstable; urgency=medium

  * data: thermald.conf: start only at runlevels 2,3,4,5 (LP: #1294895)

thermald (1.3-5) unstable; urgency=medium

  * Fix RT Linux lockup with x86 package temp driver (Closes: #761290)

thermald (1.3-4) unstable; urgency=medium

  * Fix assumption about hwmon0 (LP: #1366541)
  * Use correct nfds to not rely on memset 0 to pollfds

thermald (1.3-3) unstable; urgency=medium

  * Use correct i386 and amd64 architecture names

thermald (1.3-2) unstable; urgency=medium

  * Fix man page formatting

thermald (1.3-1) unstable; urgency=medium

  * Sync up with version 1.3

thermald (1.2-1) unstable; urgency=medium

  * Adjust for coretemp path change
  * Deny non root users to send system bus dbus messages
  * Remove compile warning
  * Remove rpmlint warning for manual page
  * Remove old patches that are now included into version 1.2
  * Sync up with version 1.2

thermald (1.1~rc2-12) unstable; urgency=medium

  * Deny non root users to send system bus dbus messages (LP: #1314527)

thermald (1.1~rc2-11) unstable; urgency=medium

  [Srinivas Pandruvada]
  * Fix Kclockwork issue: gettext bounds
  * Fix klockworks issue with strcasecmp NULL param
  * Fix klockworks double free complaints
  * Don't skip the current cdev
  * Fix klocworks issue with memleak

thermald (1.1~rc2-10) unstable; urgency=medium

  [Colin Ian King]
  * coverity scan: fix memory leak on trip_ptr
  * coverity scan: fix leaking dir on error exit path
  [Srinivas Pandruvada]
  * coverity scan: fix Unrecoverable parse warning
  * coverity scan: Untrusted loop bound
  * coverity scan: Uninitialized scalar field errors

thermald (1.1~rc2-9) unstable; urgency=medium

  * Fix up some memory leaks in !THD_SUCCESS branches
  * cthd_engine: guard against negative array indexes
  * csys_fs: fix fd leaks in lseek error return path
  * cthd_engine: remove redundant reads of thermal zone
  * thd_engine.cpp: use %u intead of %d for signed integers
  * thd_model.cpp: use correct integer format specifiers
  * thd_model.cpp: remove ununsed variable 'file'
  * thd_parse.cpp: use correct unsigned integer format specifiers
  * thd_engine.cpp: check fcntl non-blocking error return
  * fix leak of trip_ptr in read_trip_points
  * ensure device_path is null terminated
  * get_preference_cstr: return C string allocated on heap

thermald (1.1~rc2-8) unstable; urgency=medium

  [Simon McVittie <email address hidden>]
  * Add a patch to install thermald to ${sbindir} without needing a
    workaround in debian/rules, and have the systemd service file
    use that path automatically
  * Install the systemd service file (Closes: #738719)
  * Activate hardening via DEB_BUILD_MAINT_OPTIONS instead of
    hardening-wrapper
  * Add patches to improve the systemd service
  * Use dh-systemd to sync up enabledness status between sysvinit and systemd
  [Colin King]
  * Use __cpuid rather than use inline asm, simplifies i386 PIC builds

thermald (1.1~rc2-7) unstable; urgency=low

  * Redirect fd 0, 1, 2 to /dev/null to stop poll() spinning (Closes: #737093)
  * Add upstream commit; Prevent exception for invalid sysfs file reads

thermald (1.1~rc2-6) unstable; urgency=low

  * Add upstream commit: Remove warning for non Intel processor
  * Add upstream commit: Fix checking for cooling_device
  * Add upstream commit: Fix compenstion using "Processor" thermal cooling device
  * Re-work PIC ebx workaround

thermald (1.1~rc2-5) unstable; urgency=low

  * Fix up exit() to use standard EXIT_* macros
  * Fix log messages that don't have a trailing newline at end
  * Minor re-ordering of PIC ebx pop
  * Upstart conf: handle exit failures to avoid re-running forever

thermald (1.1~rc2-4) unstable; urgency=low

  * Fix FTBFS, remove quilt from dh line

thermald (1.1~rc2-3) unstable; urgency=low

  * Correctly rename man pages, fixes FTBFS (Closes: #734786)
  * Apply buggy thermal zone trip index fix (Closes: #734832)

thermald (1.1~rc2-2) unstable; urgency=low

  * Fix i386 PIC ebx clobbering with cpuid

thermald (1.1~rc2-1) unstable; urgency=low

  * Initial Debian Release (Closes: #734615)

 -- Colin King <email address hidden>  Thu, 15 Aug 2019 16:45:51 +0100

Upload details

Uploaded by:
Colin Ian King on 2019-08-15
Uploaded to:
Bionic
Original maintainer:
Colin Ian King
Architectures:
i386 amd64
Section:
misc
Urgency:
Medium Urgency

See full publishing history Publishing

Series Pocket Published Component Section

Builds

Bionic: [FULLYBUILT] amd64 [FULLYBUILT] i386

Downloads

File Size SHA-256 Checksum
thermald_1.7.0.orig.tar.xz 308.5 KiB 73038c66c65e7228dbee25370e1d046a82d61ae0d31cc84fbfabd9bbc5fbc3a8
thermald_1.7.0-5ubuntu4.debian.tar.xz 19.9 KiB 0312da24197cc8df7f4d4ae26ca7d0b193ef886b6a4dab659abad9444189fdfb
thermald_1.7.0-5ubuntu4.dsc 1.9 KiB af9162fed87d4298ef6123cb376175c77578ce46a49b0943247ae2da38944146

Available diffs

View changes file

Binary packages built by this source

thermald: Thermal monitoring and controlling daemon

 Thermal Daemon is a Linux daemon for monitoring and
 controlling platform temperatures. Once the system
 temperature reaches a certain threshold, the Linux daemon
 activates various cooling methods to try to cool the system.

thermald-dbgsym: debug symbols for thermald