u-boot-linaro 2011.09.6-0ubuntu1 source package in Ubuntu

Changelog

u-boot-linaro (2011.09.6-0ubuntu1) oneiric; urgency=low

  * omap4: reduce default operating point for 4460 devices
    Reduce the operating point for 4460 to OPP100 (MPU at 700MHz)
    (LP: #867670)
      From bug report:
        With both A9 cores loaded 4460 reaches max temperature in about 30s at the
        current operating point of 930MHz. The operating point should be lowered to
        700MHz.
        It appears the panda heats more than I thought (and much more that the blaze),
        and by loading the 2 cores I can quite easily reach max temperature at 920MHz
        (it takes around 30s on my board!).
        At 700MHz, the temperature still increases but much slower. So if the A9 cores
        do not run at 100% all the time we shall be ok.
        So for now, we definitely need this change if we don't want to run with a
        heatsink...
  * mmc: omap: enable high capacity
      Enable high capacity to host capability.
      Fixes eMMC detection on boot from MMC/SD card.
    mmc: omap: config VMMC, MMC1_PBIAS
      Config VMMC voltage to 3V for MMC/SD card slot
      and PBIAS settings needed for OMAP4
    (LP: #867650)
 -- John Rigby <email address hidden>   Wed, 05 Oct 2011 17:17:34 -0600

Upload details

Uploaded by:
John Rigby on 2011-10-06
Uploaded to:
Oneiric
Original maintainer:
Ubuntu Developers
Component:
main
Architectures:
armel
Section:
misc
Urgency:
Low Urgency

See full publishing history Publishing

Series Pocket Published Component Section
Oneiric release on 2011-10-06 main misc

Builds

Oneiric: [FULLYBUILT] armel

Downloads

File Size MD5 Checksum
u-boot-linaro_2011.09.6.orig.tar.gz 10.5 MiB 774707466a4b50e322ec014bd0cc5844
u-boot-linaro_2011.09.6-0ubuntu1.debian.tar.gz 9.2 KiB a7ea845b0411d3469eb063b97019a620
u-boot-linaro_2011.09.6-0ubuntu1.dsc 1.5 KiB 5b44a09913d15a8caea404895c47817d

View changes file

Binary packages built by this source

u-boot-linaro-ca9x4-ct-vxp: U-Boot bootloader binary for the ARM ca9x4_ct_vxp (Versatile Express) board

 This package contains the U-Boot bootloader which is responsible for
 loading and executing the Linux kernel on this board. This package
 contains the u-boot binary blob, and is not usually needed on a normal
 system

u-boot-linaro-efikamx: U-Boot bootloader binary for the Genesi i.MX515 Efika MX

 This package contains the U-Boot bootloader which is responsible for
 loading and executing the Linux kernel on this board. This package
 contains the u-boot binary blob, and is not usually needed on a normal
 system

u-boot-linaro-highbank: U-Boot bootloader binary for the Calxeda Highbank

 This package contains the U-Boot bootloader which is responsible for
 loading and executing the Linux kernel on this board. This package
 contains the u-boot binary blob, and is not usually needed on a normal
 system

u-boot-linaro-igep0020: U-Boot bootloader binary for the ISEE igep0020 (IGEPv2) board

 This package contains the U-Boot bootloader which is responsible for
 loading and executing the Linux kernel on this board. This package
 contains the u-boot binary blob, and is not usually needed on a normal
 system

u-boot-linaro-mx51evk: U-Boot bootloader binary for the Freescale i.MX51 mx51evk (Babbage) board

 This package contains the U-Boot bootloader which is responsible for
 loading and executing the Linux kernel on this board. This package
 contains the u-boot binary blob, and is not usually needed on a normal
 system

u-boot-linaro-mx53loco: U-Boot bootloader binary for the Freescale i.MX53 mx53loco (Babbage) board

 This package contains the U-Boot bootloader which is responsible for
 loading and executing the Linux kernel on this board. This package
 contains the u-boot binary blob, and is not usually needed on a normal
 system

u-boot-linaro-omap3-beagle: U-Boot bootloader binary for various TI OMAP3 Beagle boards

 This package contains the U-Boot bootloader which is responsible for
 loading and executing the Linux kernel on those boards. This package
 contains the u-boot binary blob, and is not usually needed on a normal
 system

u-boot-linaro-omap3-overo: U-Boot bootloader binary for Gumstix Overo boards

 This package contains the U-Boot bootloader which is responsible for
 loading and executing the Linux kernel on those boards. This package
 contains the u-boot binary blob, and is not usually needed on a normal
 system

u-boot-linaro-omap4-panda: U-Boot bootloader binary for the TI OMAP4 Panda board

 This package contains the U-Boot bootloader which is responsible for
 loading and executing the Linux kernel on this board. This package
 contains the u-boot binary blob, and is not usually needed on a normal
 system

u-boot-linaro-omap4-sdp4430: U-Boot bootloader binary for the TI OMAP4 SDP4430 board

 This package contains the U-Boot bootloader which is responsible for
 loading and executing the Linux kernel on this board. This package
 contains the u-boot binary blob, and is not usually needed on a normal
 system