Change log for wpasupplicant package in Ubuntu
| 1 → 59 of 59 results | First • Previous • Next • Last |
wpasupplicant (0.7.3-6ubuntu2.5) precise-security; urgency=medium
* SECURITY UPDATE: Incorrect indication of disconnection in certain
situations
- debian/patches/CVE-2019-16275.patch: silently ignore management
frame from unexpected source address in src/ap/drv_callbacks.c,
src/ap/ieee882_11.c.
- CVE-2019-16275
-- <email address hidden> (Leonidas S. Barbosa) Tue, 17 Sep 2019 10:27:33 -0300
Available diffs
wpasupplicant (0.7.3-6ubuntu2.4) precise-security; urgency=medium
* SECURITY UPDATE: denial of service via AP mode WMM Action frame
- debian/patches/CVE-2015-4142.patch: check length in src/ap/wmm.c.
- CVE-2015-4142
-- Marc Deslauriers <email address hidden> Mon, 15 Jun 2015 10:35:48 -0400
Available diffs
wpasupplicant (0.7.3-6ubuntu2.3) precise-security; urgency=medium
* SECURITY UPDATE: arbitrary command execution via unsanitized string
passed to action scripts by wpa_cli
- debian/patches/CVE-2014-3686.patch: added os_exec() helper to
src/utils/os.h, src/utils/os_unix.c, src/utils/os_win32.c,
use instead of system() in wpa_supplicant/wpa_cli.c.
- CVE-2014-3686
-- Marc Deslauriers <email address hidden> Fri, 10 Oct 2014 09:23:53 -0400
Available diffs
wpasupplicant (0.6.9-3ubuntu3.2) lucid-security; urgency=medium
* SECURITY UPDATE: arbitrary command execution via unsanitized string
passed to action scripts by wpa_cli
- debian/patches/CVE-2014-3686.patch: added os_exec() helper to
src/utils/os.h, src/utils/os_unix.c, src/utils/os_win32.c,
use instead of system() in wpa_supplicant/wpa_cli.c.
- CVE-2014-3686
-- Marc Deslauriers <email address hidden> Fri, 10 Oct 2014 09:27:24 -0400
Available diffs
wpasupplicant (0.7.3-6ubuntu2.2) precise-proposed; urgency=low
* Multiple patches to reduce the number of disconnections for WPA Enterprise
roaming and Opportunistic Key Caching. (LP: #1187524)
* In debian/patches:
0001-sme-fix-retry-after-auth-assoc-timeout-failure.patch,
0002-sme-optimize-recovery-from-common-load-balancing-mechanisms.patch,
0003-sme-blacklist-bss-on-first-failure-if-only-a-*.patch,
0004-sme-extend-load-balancing-optimization-in-bss-blacklisting.patch,
0005-sme-optimize-recovery-from-association-command-failures.patch,
0006-sme-add-timers-for-authentication-and-association.patch,
0007-sme-nl80211-set-cipher-suites.patch:
Cherry-pick patches fixing SME (Session Management Entity) for the nl80211
driver, which works as a basis for the OKC patches.
* In debian/patches:
0001-pmkokc-Set-portValid-TRUE-on-association-for-driver-based-4.patch,
0002-pmkokc-Clear-WPA-and-EAPOL-state-machine-config-pointer-on-.patch,
0003-pmkokc-Clear-driver-PMKSA-cache-entry-on-PMKSA-cache-expira.patch,
0004-pmkokc-Flush-PMKSA-cache-entries-and-invalidate-EAP-state-o.patch,
0005-pmkokc-Fix-proactive_key_caching-configuration-to-WPA-code.patch,
0006-pmkokc-RSN-Add-a-debug-message-when-considing-addition-of-O.patch,
0007-pmkokc-Clear-OKC-based-PMKSA-caching-entries-if-PMK-is-chan.patch,
0008-pmkokc-Move-wpa_sm_remove_pmkid-call-to-PMKSA-cache-entry-f.patch,
0009-pmkokc-Use-PMKSA-cache-entries-with-only-a-single-network-c.patch,
0010-pmkokc-PMKSA-Do-not-evict-active-cache-entry-when-adding-ne.patch,
0011-pmkokc-PMKSA-Set-cur_pmksa-pointer-during-initial-associati.patch,
0012-pmkokc-PMKSA-make-deauthentication-due-to-cache-entry-remov.patch,
0013-pmkokc-PMKSA-update-current-cache-entry-due-to-association-.patch:
Cherry-pick patches to properly do OKC (Opportunistic Key Caching) which
helps maintaining connectivity on networks secured with WPA Enterprise,
especially on nl80211-based drivers -- these patches require SME, and add
or fix key caching and handling of the cache entries.
* debian/patches/force-enable-okc.patch: force Opportunistic Key Caching to
be enabled.
* debian/patches/less-aggressive-roaming.patch: use less aggressive roaming
settings to avoid switching to another AP unnecessarily, when the actual
signal level difference is small.
* debian/patches/wpa_supplicant-dbus-null-error.patch: Don't send NULL to
dbus_message_new_error().
* debian/patches/0001-nl80211-Fix-UNSPEC-signal-quality-reporting.patch: fix
marking qual as invalid rather than signal level.
* debian/patches/wpa_supplicant-squelch-driver-disconnect-spam.patch: recover
cleanly from streams of disconnect messages (like on iwl3945).
* debian/patches/wpa_supplicant-assoc-timeout.patch: increase association
timeouts.
-- Mathieu Trudel-Lapierre <email address hidden> Wed, 12 Jun 2013 15:57:50 -0400
Available diffs
wpasupplicant (0.7.3-6ubuntu2.1) precise-proposed; urgency=low
* debian/patches/session-ticket.patch: disable the TLS Session Ticket
extension to fix auth with 802.1x PEAP on some hardware. (LP: #969343)
-- Mathieu Trudel-Lapierre <email address hidden> Mon, 17 Sep 2012 17:08:22 -0400
Available diffs
- diff from 0.7.3-6ubuntu2 to 0.7.3-6ubuntu2.1 (972 bytes)
| Deleted in quantal-release (Reason: (From Debian) [auto-cruft] obsolete source package) |
| Superseded in quantal-release |
| Published in precise-release |
wpasupplicant (0.7.3-6ubuntu2) precise; urgency=low
* debian/wpasupplicant.postinst: don't fail package configuration if the
sendsig omission files can't be migrated from /lib/init/rw to /run.
Thanks to Anthony Fok for the patch. (LP: #935678)
-- Mathieu Trudel-Lapierre <email address hidden> Fri, 16 Mar 2012 09:55:12 -0400
Available diffs
- diff from 0.7.3-6ubuntu1 to 0.7.3-6ubuntu2 (594 bytes)
| Superseded in precise-release |
wpasupplicant (0.7.3-6ubuntu1) precise; urgency=low
* debian/patches/dbus-activation-cmdline.patch: have wpasupplicant create
a pid file in /run/sendsigs.omit.d when activated by DBus. (LP: #869635)
-- Mathieu Trudel-Lapierre <email address hidden> Thu, 16 Feb 2012 16:21:29 -0500
Available diffs
wpasupplicant (0.6.9-3ubuntu3.1) lucid-proposed; urgency=low
* debian/patches/git_dbus_smartcard_eapol_d719934.patch: cherry-pick a patch
from Git to correctly re-initialize pointers in the WPA state machine to
avoid crashing when smartcard parameters change over DBUS (LP: #528087)
-- Mathieu Trudel-Lapierre <email address hidden> Fri, 06 Jan 2012 11:49:41 -0500
Available diffs
wpasupplicant (0.7.3-6) unstable; urgency=low
* add "hostap: Allow linking with libnl-3" from Ben Greear
<email address hidden> to allow building against libnl3 3.2.
* raise versioned build-dependency to (>= 3.2.3-2~), we need
libnl-genl-3-200-udeb and expect it in /lib/.
* switch build dependency from libnl3-dev to libnl-3-dev && libnl-genl-3-dev
accordingly.
* symlink /usr/share/doc/wpasupplicant/ to /usr/share/doc/wpa_supplicant,
which is referred to from upstream documentation (Closes: #537375,
#616120).
* enable BGSCAN_SIMPLE (Closes: #650834).
* add "For MS-CHAP, convert the password from UTF-8 to UCS-2" from
Evan Broder <email address hidden>, accepted upstream into hostap-1.git
(Closes: #649202).
-- Stefan Lippers-Hollmann <email address hidden> Mon, 19 Dec 2011 23:31:20 +0100
Available diffs
- diff from 0.7.3-5ubuntu1 (in Ubuntu) to 0.7.3-6 (459 bytes)
| Superseded in precise-release |
wpasupplicant (0.7.3-5ubuntu1) precise; urgency=low
* Release 0.7.3-6 from Debian's pkg-wpa SVN to Ubuntu Precise as
0.7.3-5ubuntu1. Leaving 0.7.3-6 as UNRELEASED for now.
-- Mathieu Trudel-Lapierre <email address hidden> Tue, 20 Dec 2011 21:10:04 -0500
Available diffs
- diff from 0.7.3-5 to 0.7.3-5ubuntu1 (4.0 KiB)
wpasupplicant (0.7.3-5) unstable; urgency=low
* restrict wpasupplicant-udeb to linux-any, until a udeb for libpcap0.8 gets
available for kfreebsd-any (Closes: #644823).
* build-depend on libncurses5-dev explicitly, as it is no longer pulled in
indirectly.
-- Ubuntu Archive Auto-Sync <email address hidden> Fri, 28 Oct 2011 09:07:59 +0000
Available diffs
- diff from 0.7.3-4 to 0.7.3-5 (698 bytes)
wpasupplicant (0.7.3-4) unstable; urgency=low
[ Kel Modderman ]
* Support /run/sendsigs.omit.d/ (Closes: #633040):
- depend on initscripts (>= 2.88dsf-13.3)
- create new omission pid files in /run/sendsigs.omit.d/ unconditionally
- migrate existing omission pid files from /lib/init/rw/ to
/run/sendsigs.omit.d/
* ACK NMU (Closes: #610931)
- add wpasupplicant-udeb
- build against libnl3
* Improve integration of the udeb addition with existing debian/rules:
- build the required binary in the build target in similar way to standard
package build
- install binary manually in dh_auto_install override rather than
wpasupplicant-udeb.install to handle renaming of binary
- sync udeb CFLAGS with the standard build
- allow potential for non-linux udebs, add a kfreebsd udeb configuration
snippet
* Filter the numerous hyphen-used-as-minus-sign informational messages
from lintian output.
* Add preferred options to debian/source/local-options to assist with quilt
patch management.
* Add patch for wpa_gui-qt4 which displays scan results signal strength in
dBm with bar indicator. (Closes: #630681)
[ Stefan Lippers-Hollmann ]
* make wpasupplicant-udeb arch=any, an initial kfreebsd udeb config is now
provided as well.
* use Package-Type instead of XC-Package-Type for wpasupplicant-udeb,
dpkg-dev >1.15.7 is available in squeeze.
* add a dependency on ${misc:Depends} for the udeb package as well.
* adapt debian/copyright to recent changes (r174) in DEP-5 and use the new
anonscm URL.
* don't use /run/sendsigs.omit.d/ if it hasn't already been created by
mountkernfs.sh (e.g. when using systemd), thanks to Michael Biebl.
-- Ubuntu Archive Auto-Sync <email address hidden> Mon, 17 Oct 2011 16:42:30 +0000
Available diffs
- diff from 0.7.3-3.1 to 0.7.3-4 (6.6 KiB)
wpasupplicant (0.7.3-3.1) unstable; urgency=low
* Non-maintainer upload with the agreement of Kel Modderman.
[ Stefan Lippers-Hollmann ]
* bump standards version to 3.9.2, no changes necessary.
[ Gaudenz Steinlin ]
* Add wpasupplicant-udeb for debian-installer. Thanks to
Mathew Palmer for providing the initial patch. (Closes: #610931)
* Build against libnl3
-- Colin Watson <email address hidden> Mon, 08 Aug 2011 15:41:41 +0000
Available diffs
- diff from 0.7.3-3 to 0.7.3-3.1 (1.9 KiB)
wpasupplicant (0.7.3-3) unstable; urgency=low
* Restore code which loop waits for wpa_supplicant generated PID and
UNIX socket on the filesystem before proceeeding with execution of
ifupdown script. (Closes: #622757, #622589)
* On DISCONNECTED event using wpa-roam, do not immediately issue
reassociation command. (Closes: #622821)
* Enable CONFIG_IEEE80211W in build configuration. (Closes: #622587)
Available diffs
- diff from 0.7.3-0ubuntu1 to 0.7.3-3 (10.1 KiB)
wpasupplicant (0.7.3-0ubuntu1) natty; urgency=low
* Get wpasupplicant 0.7.3 from Debian's SVN. Leaving 0.7.3-1 as unreleased
for now.
* Build-Depend on debhelper 8, since the packaging from Debian uses compat 8.
-- Mathieu Trudel-Lapierre <email address hidden> Mon, 22 Nov 2010 09:43:43 -0500
Available diffs
- diff from 0.6.10-2 to 0.7.3-0ubuntu1 (1.1 MiB)
wpasupplicant (0.6.10-2) unstable; urgency=low
* Switch to source format 3.0 (quilt), drop quilt build dependency
and remove '--with quilt' from dh command in debian/rules.
* Fix "FTBFS on kfreebsd-gnu" with addition of 21_kfreebsd.patch.
Thanks to work by Stefan Lippers-Hollmann and Petr Salinger.
(Closes: #480572)
* Disable experimental feature CONFIG_IEEE80211W (management frame
protection) due to it not being supported by any driver but ath9k
and it generating ioctl errors which cause much concern among users
for little to no benefit.
* Add traling blank line to debian/NEWS to assist apt-listchanges as
per lintian advice.
* Cherry pick 30_cfg80211_association_optimisation.patch from upstream
git. Add cfg80211-specific optimization to avoid silly behavior.
Available diffs
- diff from 0.6.9-3ubuntu3 to 0.6.10-2 (72.0 KiB)
wpasupplicant (0.6.9-3ubuntu3) lucid; urgency=low
* rebuild rest of main for armel armv7/thumb2 optimization;
UbuntuSpec:mobile-lucid-arm-gcc-v7-thumb2
-- Alexander Sack <email address hidden> Sun, 07 Mar 2010 01:11:22 +0100
Available diffs
- diff from 0.6.9-3ubuntu2 to 0.6.9-3ubuntu3 (356 bytes)
| Superseded in lucid-release |
wpasupplicant (0.6.9-3ubuntu2) lucid; urgency=low
* debian/patches/12_no_syslog_flood.patch:
- Upstream GIT change to not flood syslog with CTRL-EVENT-SCAN-RESULTS
messages (LP: #352118)
-- Chris Coulson <email address hidden> Fri, 05 Mar 2010 12:45:09 +0000
Available diffs
wpasupplicant (0.6.9-3ubuntu1) karmic; urgency=low * Build-depend on libreadline-dev instead of libreadline5-dev. -- Matthias Klose <email address hidden> Sat, 19 Sep 2009 22:43:56 +0200
Available diffs
- diff from 0.6.9-3 to 0.6.9-3ubuntu1 (412 bytes)
wpasupplicant (0.6.9-3) unstable; urgency=low
* Drop debian/patches/12_syslog_supplement.patch. It adds code which
attempts to prettify output but doesn't handle large output well.
(Closes: #528639)
-- Ubuntu Archive Auto-Sync <email address hidden> Mon, 01 Jun 2009 10:47:10 +0100
Available diffs
- diff from 0.6.9-2 to 0.6.9-3 (1.7 KiB)
wpasupplicant (0.6.9-2) unstable; urgency=low
* Add debian/patches/07_dbus_service_syslog.patch to enable syslog
logging when wpa_supplicant is started via D-Bus.
* Start wpa_supplicant with default level of verbosity via ifupdown
hooks, rather than in quiet mode.
* Merge some differences from wpasupplicant_0.6.6-2ubuntu1.patch, with
very minor modification:
- 12_syslog_supplement.patch: Add a few more bits missing from the
upstream patch, based on
http://cvs.fedoraproject.org/viewvc/rpms/wpa_supplicant/OLPC-2/wpa_supplicant-0.5.7-use-syslog.patch.
Compile with -DCONFIG_DEBUG_SYSLOG if CONFIG_DEBUG_SYSLOG is set in
the configuration file.
- Enable CONFIG_DEBUG_SYSLOG in debian/config/* (rather than
CFLAGS += -DCONFIG_DEBUG_SYSLOG).
- debian/ifupdown/functions.sh: Silence wpa_log_* if /var/log is not yet
writable; there is little we can do in this case (logger is in /usr,
so may well also be unusable), and the user can always get more
information by reconnecting later.
- Thanks to Colin Watson <email address hidden>
* Sync common build configuration options between debian/config/kfreebsd and
debian/config/linux.
* Add patch description to
debian/patches/06_wpa_gui_menu_exec_path.patch.
Available diffs
- diff from 0.6.6-2ubuntu1 to 0.6.9-2 (211.9 KiB)
wpasupplicant (0.6.6-2ubuntu1) jaunty; urgency=low * Operate reasonably when /var is not yet mounted read-write (LP: #44194): - 07_syslog.patch: Backport syslog logging support from upstream. - 08_syslog_supplement.patch: Add a few more bits missing from the upstream patch, based on http://cvs.fedoraproject.org/viewvc/rpms/wpa_supplicant/OLPC-2/wpa_supplicant-0.5.7-use-syslog.patch. Compile with -DCONFIG_DEBUG_SYSLOG if CONFIG_DEBUG_SYSLOG is set in the configuration file. - Enable CONFIG_DEBUG_SYSLOG. - debian/ifupdown/functions.sh: Set WPA_SUP_LOGFILE to "syslog" by default, and use the -s option in this case. - debian/ifupdown/functions.sh: Silence wpa_log_* if /var/log is not yet writable; there is little we can do in this case (logger is in /usr, so may well also be unusable), and the user can always get more information by reconnecting later. -- Colin Watson <email address hidden> Thu, 09 Apr 2009 02:31:17 +0100
Available diffs
- diff from 0.6.6-2 to 0.6.6-2ubuntu1 (4.0 KiB)
wpasupplicant (0.6.6-2) experimental; urgency=low
[ Martin Pitt ]
* debian/ifupdown/action_wpa.sh: pm-utils now supplies a second
argument to the hooks, thus telling ifplugd and pm-utils apart by
the number of arguments does not work any more. Fix up the script
to just evaluate the arguments themselves, to work with current
and older pm-utils. This unbreaks suspend. (LP: #307312)
(Closes: #508526, #509484)
[ Kel Modderman ]
* It has been reported by Alexander E. Patrakov <email address hidden> that
WEP keys are set in quick time in newer wpa_supplicant releases and no
longer cause problems attempting to connect to specific access point
during boot sequence. (Closes: #489948)
* Do not start wpa_gui in system tray per default when executed from menu
system (discussion with upstream resulted in desire to have app opened in
foreground, no need to diverge from that).
-- Martin Pitt <email address hidden> Mon, 29 Dec 2008 07:29:23 +0000
Available diffs
- diff from 0.6.6-1ubuntu1 to 0.6.6-2 (1.1 KiB)
| Superseded in jaunty-release |
wpasupplicant (0.6.6-1ubuntu1) jaunty; urgency=low
* debian/ifupdown/action_wpa.sh: pm-utils now supplies a second
argument to the hooks, thus telling ifplugd and pm-utils apart by
the number of arguments does not work any more. Fix up the script
to just evaluate the arguments themselves, to work with current
and older pm-utils. This unbreaks suspend. (LP: #307312, forwarded
to Debian #508526)
-- Martin Pitt <email address hidden> Thu, 11 Dec 2008 16:57:31 -0800
Available diffs
- diff from 0.6.6-1 to 0.6.6-1ubuntu1 (914 bytes)
wpasupplicant (0.6.6-1) experimental; urgency=low
* New upstream release.
* Update debian/copyright to include copyright holders of new source files
(src/drivers/driver_roboswitch.*).
* Drop patches applied upstream:
- debian/patches/10_ftbfs_gcc_4.4.patch
- debian/patches/20_delay_mic_error_report.patch
* Add libqt4-svg to Dependencies of wpagui for tray icon support.
(Closes: #505492)
Available diffs
- diff from 0.6.4-3 to 0.6.6-1 (93.1 KiB)
wpasupplicant (0.6.4-3) unstable; urgency=low
* Bugfix: "Missing -d in testing for a directory in init script".
Thanks to Braun Gábor <email address hidden> for reporting and the patch.
(Closes: #506328)
-- Ubuntu Archive Auto-Sync <email address hidden> Fri, 05 Dec 2008 18:47:52 +0000
Available diffs
- diff from 0.6.4-2 to 0.6.4-3 (528 bytes)
wpasupplicant (0.6.4-2) unstable; urgency=low
* Bugfix: wpasupplicant crashes (closes: #485769). Patch taken from
upstream git.
-- Reinhard Tartler <email address hidden> Wed, 03 Sep 2008 15:08:29 +0100
Available diffs
- diff from 0.6.4-1 to 0.6.4-2 (1.5 KiB)
wpasupplicant (0.6.4-1) unstable; urgency=low
[ Kel Modderman ]
* New upstream release
* Retroactively cleanse past changelog entries of information indicating
that they were not released, as they were.
* Use short option for grep (-q) and sed (-n) instead of the busybox
incompatible --quiet as per advice of Charles-Henri Gros.
* wpa_action: on connected action, call wpa_hysteresis_event before
ifup, so that a disconnected action may still be effective should
the ifup take a long time (eg. dhcp request takes a long time and
eventually fails).
[ Alessio Treglia <email address hidden> ]
* Added build-depends on libdbus-glib-1-dev, fixes FTBFS (LP: #256274).
-- Reinhard Tartler <email address hidden> Wed, 20 Aug 2008 12:38:34 +0100
Available diffs
| Superseded in intrepid-release |
wpasupplicant (0.6.4~git20080716.93ef879-1) unstable; urgency=low
[ Kel Modderman ]
* (NOT RELEASED YET) New upstream git snapshot.
* Drop patches applied upstream:
- 10_silence_siocsiwauth_icotl_failure.patch
- 11_avoid_dbus_version_namespace.patch
- 12_fix_potential_use_after_free.patch
- 13_defined_IEEE8021X_EAPOL.patch
- 14_fix_compile_without_eap.patch
- 15_silence_out_of_bounds_warnings.patch
- 41_manpage_format_fixes.patch
- 42_manpage_explain_available_drivers.patch
- 43_remove_w_from_help.patch
- 50_wext_dont_overwrite_bss_freq.patch
- 51_dont_reschedule_specific_scans_for_hidden_ssids.patch
- 52_handle_mac80211_mode_switch.patch
- 53_give_adhoc_assoc_more_time.patch
* Drop -20_wpa_gui_qt4_disable_link_prl.patch, the qt4 linking problem has
been fixed by our qt4 maintainers.
* Refresh remaining patch series.
* Increase Standards_version to 3.8.0. Explain in debian/README.Debian-source
that the `debian/rules patch` command is required to prepare the source
tree for building.
* Cleanup debian/wpasupplicant.links, removing trailing whitespace and
leading / from target symlink pathname.
* Remove debian/README.Debian, the information therin was irrelevant for the
current release cycle, and is better explained by the README.modes
document.
* Move debian/README.modes to debian/README.Debian, and create a backwards
compat symlink (/usr/share/doc/wpasupplicant/README.modes.gz ->
README.Debian.gz) to avoid breaking current online documentation.
* Fix spelling error in new debian/README.Debian found by lintian.
* Don't install the wpa_supplicant/eap_testing.txt document, it contains
information about development features and testing that is not possible
with what is provided by the wpasupplicant package.
* Remove the QMAKE variable from debian/rules, it is no longer used with
upstream build system.
* Remove debian/wpagui.install and instead invoke dh_install explicitly in
debian/rules, making use of the WPAGUI variable, to have the correct
version of wpa_gui installed (assist in switch to-fro different QT ports).
* Remove possible bashisms (local(x, y)) from debian/ifupdown/functions.sh.
* Add rudimentary locking system when wpa_action(8) calls ifup/ifdown, so
that /etc/network/if-*.d/wpasupplicant can differentiate between admin
calling ifup/ifdown or wpa_action. (Closes: #488078, #373180)
* When wpa_action calls ifup/ifdown, use verbose command line option for
more detailed log of what hook scripts are executed.
* wpa-ifupdown.init should always stop wpa_action daemon, ifupdown is only
guaranteed to stop it if interface is currently configured.
* Move debian/README.Debian-source to debian/README.source, as policy seem
to prefer this filename now as of version 3.8.0.
[ Reinhard Tartler ]
* lower debhelper compat level to 6 to ease backporting
-- Reinhard Tartler <email address hidden> Wed, 20 Aug 2008 09:43:19 +0100
Available diffs
- diff from 0.6.3-2 to 0.6.4~git20080716.93ef879-1 (133.3 KiB)
wpasupplicant (0.6.3-2) UNRELEASED; urgency=low
* Add patch to remove -w option from help output, it has been removed in
previous versions. (Closes: #472853)
* Correctly refer to wpa-debug-level (not wpa-verbosity-level) ifupdown
parameter to control logging output. (Closes: #474440)
* Apply patch to permit package build on GNU/kFreeBSD.
- add debian/config.kfreebsd build configuration file
- adapt debian/rules to use debian/config/kfreebsd when building for
kfreebsd DEB_HOST_ARCH_OS
* Fix arch specific build dependency declarations introduced by GNU/kFreeBSD
compat patch.
* Build depend on debhelper >= 7, adjust debian/compat to suit.
* Simplify debian/rules, cleaning up the sanitization of
README.wpa_supplicant.conf, clean , build and install targets.
* Span the Build-Depends field of debian/control over multiple lines.
* Add debian/patches/13_defined_IEEE8021X_EAPOL.patch to allow compilation
when CONFIG_IEEE8021X_EAPOL is not defined and allow people attempting to
progress on wpasuplicant udeb (and netcfg integration) to move on.
* Add 14_fix_compile_without_eap.patch to fix another FTBFS when
IEEE8021X_EAPOL is not defined.
* Rename debian/extra-examples/ to debian/examples/.
* Slightly modify the way get-git-snapshot is invoked by debian/rules.
* Create debian/config/ directory to contain various build configuration
files for different targets (eg. udeb, kfreebsd, linux).
* Disable building of test driver backend, no development can sanely be done
with this binary package.
* Disable building of hostap driver backend, the version of hostap driver in
existence since Linux 2.6.14 (or before) uses the wext driver backend.
* Provide code in ./debian/ifupdown/functions.sh that warns about invalid
wpa-driver choice, and falls back to the usage of a default backend.
* Modify debian/README.modes to not contain blurb about which driver_backend
to use, wext should almost _always_ be used.
* Refresh debian/patches/14_fix_compile_without_eap.patch with what was
applied upstream.
* Add 50_wext_dont_overwrite_bss_freq.patch to fix handling of channel and
frequency information returned by mac80211 using drivers in ad-hoc mode.
* 51_dont_reschedule_specific_scans_for_hidden_ssids.patch to optimize scan
rescheduling in order to better detect hidden SSIDs.
* Simplify debian/rules handling of wpa_supplicant/.config, just cp it in as
needed in build target. Move dh_install into install target. These will
make integration of possible future udeb cleaner.
* Add 52_handle_mac80211_mode_switch.patch to enhance handling of mode
switching for mac80211 using interfaces.
* Add 53_give_adhoc_assoc_more_time.patch to give adhoc associations a bit
more time.
* Add 15_silence_out_of_bounds_warnings.patch to silence gcc-4.3 warnings
about accessing out of bounds array index.
* Purge debian/madwifi-headers/* and no longer activate the driver_madwifi
backend of wpa_supplicant. Remove reference to it in support
documentation. If "wpa-driver madwifi" is used in an /e/n/i stanza print a
warning and use "wext" instead.
-- Ubuntu Archive Auto-Sync <email address hidden> Sat, 14 Jun 2008 09:28:31 +0100
Available diffs
- diff from 0.6.3-1 to 0.6.3-2 (37.9 KiB)
wpasupplicant (0.6.3-1) unstable; urgency=low
* New upstream release.
* Drop patches applied upstream:
- debian/patches/30_wpa_gui_qt4_eventhistoryui_rework.patch
- debian/patches/31_wpa_gui_qt4_eventhistory_always_scrollbar.patch
- debian/patches/32_wpa_gui_qt4_eventhistory_scroll_with_events.patch
- debian/patches/40_dbus_ssid_data.patch
* Tidy up the clean target of debian/rules. Now that the madwifi headers are
handled differently we no longer need to do any cleanup.
* Fix formatting error in debian/ifupdown/wpa_action.8 to make lintian
quieter.
* Add patch to fix formatting errors in manpages build from sgml source. Use
<emphasis> tags to hightlight keywords instead of surrounding them in
strong quotes.
- debian/patches/41_manpage_format_fixes.patch
* wpasupplicant binary package no longer suggests pcscd, guessnet, iproute
or wireless-tools, nor does it recommend dhcp3-client. These are not
needed.
* Add debian/patches/10_silence_siocsiwauth_icotl_failure.patch to disable
ioctl failure messages that occur under normal conditions.
* Cherry pick two upstream git commits concerning the dbus interface:
- debian/patches/11_avoid_dbus_version_namespace.patch
- debian/patches/12_fix_potential_use_after_free.patch
* Add debian/patches/42_manpage_explain_available_drivers.patch to explain
that not all of the driver backends are available in the provided
wpa_supplicant binary, and that the canonical list of supported driver
backends can be retrieved from the wpa_supplicant -h (help) output.
(Closes: #466910)
* Add debian/patches/20_wpa_gui_qt4_disable_link_prl.patch to remove
link_prl CONFIG compile flag added by qmake-qt4 >= 4.3.4-2 to avoid excess
linking.
wpasupplicant (0.6.0+0.5.8-0ubuntu2) hardy; urgency=low
* 10_set_channel_in_adhoc_mode: make wpasupplicant set the frequency when.
LP: #112009. Patch prepared by Kel Modderman for debian.
* 10_silence_siocsiwauth_icotl_failure: patch taken from upstream.
when using the wext driver, the error message on the SIOCSIWAUTH ioctl
is no longer printed via stderr, but properly in the debug log.
Patch prepared by Kel Modderman for debian.
-- Reinhard Tartler <email address hidden> Wed, 12 Mar 2008 17:40:06 +0100
wpasupplicant (0.6.0+0.5.8-0ubuntu1) gutsy; urgency=low
* New upstream release
* remove patch 11_erroneous_manpage_ref, applied upstream
* remove patch 25_wpas_dbus_unregister_iface_fix, applied upstream
[ Alexander Sack ]
* bumping upstream version to replace development version 0.6.0 with
this package from stable release branch.
* attempt to fix wierd timeout and high latency issues by going
back to stable upstream version (0.5.9) (LP: #140763,
LP: #141233).
-- Reinhard Tartler <email address hidden> Sun, 26 Aug 2007 16:06:57 +0200
wpasupplicant (0.6.0-3) unstable; urgency=low
* Add debian/mk-madwifi-header-patch, a quick and dirty bash script for
generating the madwifi header patch.
* Fix typo in README.modes, wpa-default-iface is really
wpa-roam-default-iface. (Closes: #435718)
* Simplify debian/dot.config.mk.
* Confirm that the ifupdown scripts do set ssid when wpa-ssid is used with a
value in /etc/network/interfaces. (Closes: #367655)
* Truncate default build .config. Make madwifi config option conditional on
MADWIFI variable.
* Add 10_fix_non_wpa_zero_len_ssid.dpatch to fix regression inhibiting
selection of non-WPA zero length ssid. (Closes: #431102)
* Fix debian-rules-ignores-make-clean-error lintian error.
wpasupplicant (0.6.0-1) unstable; urgency=low
[Kel Modderman]
* New upstream release.
- restructured source layout
* Adjust debian/wpasupplicant.examples, debian/wpagui.install,
debian/wpasupplicant.install, debian/wpasupplicant.manpages, and
debian/wpasupplicant.docs for new layout.
* Redjust debian/patches/30_dbus_policy.dpatch and
debian/patches/40_debian_doc_examples.dpatch to apply against new layout.
* Drop debian/patches/10_config.dpatch and
debian/patches/21_madwifi_includes.dpatch.
* Introduce makefile fragment for wpa_supplicant .config creation. Call it
from debian/rules. It is named debian/dot.config.mk.
* Add WPADIR variable to debian/rules, adjust build and install targets to
use WPADIR.
* Update madwifi_headers patch with code from current madwifi SVN trunk.
* Damage control: allow 'wpa-conf managed' to pass through without failure
for those people who followed the poor example outlined in the hidden
ssid's section of README.modes. Also remove the offending line from the
documentaion. (Closes: #428137)
[Reinhard Tartler]
* Fix building wpagui.
* remove debian/wpasupplicant.preinst, since we don't support upgrades
from oldstable. This way we don't need to look at /var/lib/dpkg/status
anymore, which is unreliable anyway. Makes lintian happy.
-- Ubuntu Archive Auto-Sync <email address hidden> Mon, 18 Jun 2007 17:05:31 +0100
| Superseded in gutsy-release |
wpasupplicant (0.6.0~cvs20070224-3) unstable; urgency=low
* Add netdev group if it does not exist, since we provide a dbus
configuration file that insists on using that group. (Closes: #418641)
-- Ubuntu Archive Auto-Sync <email address hidden> Wed, 16 May 2007 07:59:06 +0100
| Superseded in gutsy-release |
wpasupplicant (0.6.0~cvs20070224-2) unstable; urgency=low
[Kel Modderman]
* Update XS-Vcs fields of debian/control to reflect pkg-wpa archive change.
* Update debian/copyright with new upstream URL's and Jouni's new email
address.
* Rename madwifi related dpatches to match that of hostapd source package.
* Update debian/watch with new upstream release URL.
[Reinhard Tartler]
* Remove the prerm script as discussed on pkg-wpa-devel@
* upload to unstable
wpasupplicant (0.5.7-0ubuntu2) feisty; urgency=low
* Apply patch from upstream after private email discussion:
http://w1.fi/gitweb/gitweb.cgi?p=hostap.git;a=commitdiff;h=33673d3f43da6f5ec0f0aa5a8245a1617b6eb2fd#patch1
Fixes LP: #98895, #98925
-- Reinhard Tartler <email address hidden> Sun, 1 Apr 2007 10:53:37 +0200
| Superseded in feisty-release |
wpasupplicant (0.5.7-0ubuntu1) feisty; urgency=low
* New upstream release
* fixed dbus ctrl_iface to validate message interface before
dispatching to avoid a possible segfault [Bug 190] / LP: #91676
(UVF exception granted by Mithrandir)
-- Reinhard Tartler <email address hidden> Thu, 29 Mar 2007 21:41:10 +0200
wpasupplicant (0.5.5-4) unstable; urgency=low
* Settings for wired networks are no longer ignored by functions.sh.
(Closes: #401413)
-- Ubuntu Archive Auto-Sync <email address hidden> Fri, 15 Dec 2006 10:30:34 +0000
wpasupplicant (0.5.5-3) unstable; urgency=low
* Make needlessly global shell function variables local. Use local
consistently. [debian/functions.sh]
* Enhance error message when wpa-conf or wpa-roam mode is requested, but the
supplied configuration file is not readable or incorrect.
[debian/ifupdown.sh]
* Exchange bogus copyright holder information of functions.sh, ifupdown.sh
and wpa_action.sh for information reflecting the _group_ behind them.
* Force ap_scan=0 for "wired" IEEE8021X type authentication.
[debian/functions.sh]
* Add debian specific location for example wpa_supplicant.conf files to
wpa_supplicant.conf(8). (Closes: #396005)
* Fix typo in wpa_supplicant(8) that referred to non-existant manpage.
(Closes: #389948)
* Update madwifi private includes to latest (r1794).
* Add XS-X-Vcs-Svn field to debian/control file.
* Shunt env var IFACE to WPA_IFACE in the ifupdown.sh, wpa_action.sh and
function.sh scripts. This allows further flexibility, such as the ability
to start wpa_supplicant on an arbitary interface specified by a
'wpa-iface' line in /etc/network/interfaces.
-- Ubuntu Archive Auto-Sync <email address hidden> Wed, 06 Dec 2006 13:18:27 +0000
wpasupplicant (0.5.5-2) unstable; urgency=low
* Update madwifi headers to latest SVN. (Closes: #388316)
* Remove failed attempt at action locking. [debian/functions.sh,
debian/wpa_action.sh]
* Add hysteresis checking functions, to avoid "event loops" while
using wpa-roam. [debian/functions.sh, debian/wpa_action.sh]
* Change of co-maintainer email address.
* Add ishex() function to functions.sh to determine wpa-psk value type in
plaintext or hex. This effectively eliminates the need for the bogus and
somewhat confusing wpa-passphrase contruct specific to our scripts and
allows wpa-psk to work with either a 8 to 63 character long plaintext
string or 64 character long hex string.
* Adjust README.modes to not refer to the redundant wpa-passphrase stuff.
* Add big fat NOTE about acceptable wpa-psk's to top of example gallery.
* Strip surrounding quotes from wpa-ssid if present, instead of just whining
about them.
* Update email address in copyright blurb of functions.sh, ifupdown.sh and
wpa_action.sh.
wpasupplicant (0.5.4-5) unstable; urgency=low
* STDIN was not given to external mapping script correctly. Use the power of
eval to fix the issue. [wpa_action.sh]
* Fix stupid debian/control error: duplicate Suggests fields.
| Superseded in edgy-release |
wpasupplicant (0.5.4-2ubuntu1) edgy; urgency=low
* Use the includes for the old madwifi drivers while madwifi-ng is
both broken and not the default in edgy (expect another upload this
week to revert this when lrm is uploaded)
-- Scott James Remnant <email address hidden> Mon, 31 Jul 2006 12:08:37 +0100
wpasupplicant (0.5.4-2) unstable; urgency=low
[ Kel Modderman ]
* End testing period. The 0.5 branch of wpa_supplicant upstream has proven
to be non disruptive to users' configurations over the past few weeks,
lets now allow this to propogate to testing. (Closes: #374342)
* Clean up the LSB Init header block. Provide all fields as per LSB Init
Script Comment Convention specification.
* Do not use /usr/bin/env to interrogate the environment for IF_WPA
variables, /usr may not be mounted at time of invocation. Use `set'
(shell built-in) instead. (Closes: #376243)
* Exit if IFSTATE_FILE or INTERFACES_FILE do not exist. Also, look for
ifstate file in /var/run/network to remain compatible with Ubuntu's
ifupdown divergence. (lp#51351)
* Add a similar IFSTATE_FILE test to wpa-ifupdown.init, to remain compatible
with Ubuntu. (lp#51351)
* Update wpa_action.8 with the behaviour of wpa_action when IFSTATE_FILE or
INTERFACES_FILE cannot be found, and the pathnames searched for their
existance.
* Mention wpa_cli(8) in Custom Action Script section of README.Debian, as it
contains information about environment variables available to the script
at runtime.
* Also clarify dhclient wpacli-action script usage, to avoid people
mistakenly cp'ing the skeleton script.
* Add some info about howto revert installation of deprecated init script to
NEWS file.
* Add 'wpa-verbosity' switch, so that setting 'wpa-verbosity 1' in an
interfaces stanza will cause wpa_supplicant's ifupdown hook to be loud.
This was overlooked when #361586 was closed some time ago.
* Remove return value hack in wpa_action, use set -e to exit on error
instead. (Closes: #376553)
* Not only flush IFACE when iproute is installed, but also use /sbin/ip to
set 'up' operstate as well.
* Default to wext without exception. Remove the check for wireless extensions
via /proc/net/wireless, and prevent driver type of "wired" from being
selected in the case that the iface may not be "prepared" yet.
(Closes: #376651)
* Remove duplicating pidfile shell var's in wpa_action.sh by simply making
them global.
[ Reinhard Tartler ]
* Note that ap_scap=2 can help speeding up associations (Closes: #368770)
* wpa_action: flush the ip addr, if the package iproute is installed
* wpa_action: add action 'reload' to reload the wpa_supplicant configuration
* debian/control: add iproute to Recommends
-- Reinhard Tartler <email address hidden> Thu, 06 Jul 2006 02:57:09 +0100
wpasupplicant (0.5.4-1) unstable; urgency=low
* New upstream release.
* WPA_CRTL_DIR environment variable is now exported to action scripts, we
will use it to print a status report after a CONNECTED event.
* Make logfile contents easier to read by adding a break between each ACTION
event.
* Recommend dhcp3-client, it handles consecutive wpa_action events with more
grace than dhcp-client by not starting multiple dhclient processes on the
same interface.
* Don't remove wpa_action logfile on 'stop'.
* Enhance wpa_action(8) to better explain the concept of a LOGICAL
interface.
* Install wpa_passphrase to /bin. (Closes: #373948)
* Manpages have been slightly enhanced, and now briefly explain wpa_cli
action environment variables and wpa_supplicant -C and -g options.
(Closes: #372615)
* Rename wpa_cli daemon pidfile to wpa_action.IFACE.pid for wpa-roam.
* Further env variable testing cleanups to ifupdown.sh.
* Global rename of WPA_COMMON_CTRL_IFACE to WPA_CTRL_DIR, as this is used
for the same purposes upstream.
* No longer penalise users for not having ctrl_interface explicitly
contained within their wpa_supplicant.conf. (Closes: #375599)
* Move WPA_ACTION_SCRIPT sanity checking into init_wpa_supplicant() to avoid
ifupdown.sh exiting when bringing down an interface when ifup previously
failed due to a missing or non-executable action script.
* Add numerous code comments to ifupdown.sh.
* Move WPA_CLI_OPTIONS and WPA_SUP_OPTIONS into their respective init()
functions.
* wpa_action now logs 'stop' events to file, updated manpage.
* Split wpa_action logging into two parts, event and environment. Only
wpa_cli events will echo env var's.
* wpa_action exits with retval of ifdown command on 'stop' event.
* Add workaround for sendsigs (initscripts) terminating wpa_supplicant
processes before networking is shutdown gracefully. An init script
wpa-ifupdown is called at sequence number 15 in runlevels 0 and 6 to bring
down all interfaces that were started via ifupdown.sh.
| Obsolete in dapper-updates |
wpasupplicant (0.4.8-3ubuntu1.1) dapper-updates; urgency=low
* Apply patch from Kel Modderman for /etc/wpa_supplicant/ifupdown.sh
+ use wpa_cli command add_network instead of some arcane awk magic
+ fix some obvious typos
-- Reinhard Tartler <email address hidden> Tue, 13 Jun 2006 18:47:07 +0200
wpasupplicant (0.4.8-3ubuntu1) dapper; urgency=low
[ Kel Modderman ]
* Orphaned daemons that are spawned during an ifup process that is
manually terminated are now checked for and killed.
* Don't make noise when we are not using the manual inet method and
wpa-action is used.
* Warn about non-executable action script.
* Ensure wpa_cli actfile is destroyed before launching action script.
* Make start-stop-daemon verbose when VERBOSITY is set.
* Fix typo in Readme.Debian, that referred to a non-existant location.
(Closes: #364829)
* Add upstream fix for static wep keys with wext interfaces.
(http://hostap.epitest.fi/bugz/show_bug.cgi?id=140)
[ Reinhard Tartler ]
* This is branched of revision 310 of debian/trunk
* tested snapshot fix https://launchpad.net/bugs/41480
* made ifupdown.sh quiet on success without --verbose
-- Reinhard Tartler <email address hidden> Thu, 27 Apr 2006 10:40:57 +0200
| Superseded in dapper-release |
wpasupplicant (0.4.8-1build1) dapper; urgency=low * fakesync from debian.
| Superseded in dapper-release |
wpasupplicant (0.4.8-0ubuntu3) dapper; urgency=low
* Add 40_ctrl_iface_hide_keys.dpatch to hide passwords and PINs from
our logfiles, preventing an information disclosure vulnerability.
-- Adam Conrad <email address hidden> Wed, 29 Mar 2006 23:49:26 +1100
wpasupplicant (0.4.8-0ubuntu2) dapper; urgency=low
[ Kel Modderman ] - done in debian experimental for version 0.5.2-1
* New upstream release.
* Add myself to Uploaders.
* Convert to cdbs.
- rewrite debian/rules to take advantage of cdbs
- update control file build-deps
* Update README.modes.
- clarify that wext is used by default, when no driver is specified
- fix exmaple of wpa-psk using a plaintext string
- fix typo's
* Fold pre-up scripts into one, and symlink from
/etc/network/if-{pre-up,down}.d/wpasupplicant
* Use VERBOSITY of ifupdown to assist debugging of wpa stanza's in
/etc/network/interfaces.
* Add support for wpa_cli action scripts.
* Use start-stop-daemon to initiate wpa_supplicant and wpa_cli background
processes.
* Daemons now create pidfiles.
* Quote tested var's in wpasupplicant.init.
* Quote all var's in wpsupplicant.default for uniformity.
* Move wpa_* to /sbin.
* Conffile for wpa_supplicant now installed to
/etc/wpa_supplicant/wpa_supplicant.conf. That directory will hold any
other files that we may require to use wpa_supplicant.
* Don't start wpasupplicant pre-up if the current kernel lacks support for
"Packet Socket" (CONFIG_PACKET=y).
* Fix blunders in the init script.
- typo, $PIFFILE should have been $PIDFILE
- init script exited when a configuration file WAS found
* Force init daemon's pidfile to be the same as wpasupplicant.ifupdown uses,
to avoid duplicate wpa_supplicant processes binding to the same interface.
* Remove the margin for error from the init daemon, by forcing the default
variables to be set. Helpful and informative comments were placed in the
default file. The init script will exit if these variables are not set
correctly. (Closes: #357957)
* Add comment to defconf about ctrl_interface and wpa_cli.
* Add comments to previously uncommented dpatch's.
* Include proof-of-concept dhlcient wpa-action script. Suggest
dhcp(3)-client.
* Thanks to Henrik Brix Andersen from gentoo for the ideas and inspriration
for some of the above changes.
[ Reinhard Tartler ]
* install compatibility links from /usr/sbin/wpa_supplicant ->
/sbin/wpa_supplicant
* /usr/sbin/wpa_cli -> /sbin/wpa_cli likewise
* compile wpa_gui with qt3 rather than qt4. (in order to faciliate
backporting to sarge)
* revert to debhelper 4
* take the complete packaging from our experimental branch. The last upload
did not document all changes properly (see the list above), and had still
a lot of issues.
* fixing typo in the preinst
-- Reinhard Tartler <email address hidden> Mon, 27 Mar 2006 15:28:22 +0200
| Superseded in dapper-release |
wpasupplicant (0.4.8-0ubuntu1) dapper; urgency=low
* New upstream release:
- Various bug fixes
- Support for EAP-FAST key derivation using other ciphers than
RC4-128-SHA for authentication and AES128-SHA for provisioning.
- UVF exception granted by Kamion.
* Packaging and configuration is based on Debian Experimental however,
making this package something of a bastard love child of what's in
Debian.
* Deliberately dropped support for wpasupplicant being run at startup to
make it easier for Ubuntu to support. It's now run on a per-interface
basis when the interface is brought up.
Consult /usr/share/doc/wpasupplicant/README.Debian for documentation
if upgrading from universe.
* Unlike Debian the wpa-conf /etc/network/interfaces is only needed for
explicitly giving a configuration file; simply include any setting
for wpa to be used.
* Binaries moved to /sbin for seb128.
-- Scott James Remnant <email address hidden> Thu, 23 Mar 2006 23:29:57 +0000
| Superseded in dapper-release |
wpasupplicant (0.4.7-0ubuntu6) dapper; urgency=low
* Split the wpa_gui binary out into its own package, as done with 0.4.8,
to avoid dragging libqt into ubuntu-desktop.
-- Scott James Remnant <email address hidden> Thu, 23 Mar 2006 19:40:27 +0000
| Superseded in dapper-release |
wpasupplicant (0.4.7-0ubuntu5) dapper; urgency=low
* 30_ctrl_iface_ap_scan.dpatch, taken from the DapperNetworkManager
repository, required for NetworkManager; done by siretart.
* Add comment to the default file that tells people it does not need
to be enabled when using NetworkManagaer.
* Remove "disabled" messages from init script, and just exit cleanly.
* Prettyfy the init script.
-- Scott James Remnant <email address hidden> Thu, 23 Mar 2006 19:24:05 +0000
wpasupplicant (0.4.7-0ubuntu4) dapper; urgency=low * build and install wpa_gui applications (Malone #4695) * use debhelper 5 -- Reinhard Tartler <email address hidden> Thu, 26 Jan 2006 21:02:26 +0000
| Superseded in dapper-release |
wpasupplicant (0.4.7-0ubuntu3) dapper; urgency=low
The "All hail the udev New World Order" release.
* Convert rcS.d script to use /etc/network/if-p{ost-down,re-up}.d
instead. Remove the rcS.d script installed in 0.4.7-0ubuntu{1,2}.
If you manually modified /etc/network/interfaces to use the pre-up
and post-down directives with wpasupplicant, please remove them.
Thanks to Scott James Remnant for the guidance.
-- Daniel T Chen <email address hidden> Sun, 4 Dec 2005 09:55:18 -0800
| Obsolete in breezy-release |
wpasupplicant (0.4.5-0ubuntu1) breezy; urgency=low * New upstream version. -- Daniel T Chen <email address hidden> Sun, 2 Oct 2005 18:24:42 -0700
wpasupplicant (0.3.8-1) unstable; urgency=low
* New upstream release.
* This release fixes a crash due to a buffer overflow, caused by
a missing validation step on EAPOL-Key frames. Receiving malformed
frames trigger the crash. More information available in the notes:
http://lists.shmoo.com/pipermail/hostap/2005-February/009465.html
* Fix some badness with the init script. Missed the -B option
to daemonize wpa_supplicant... pidfile is not currently being used
as it requires modifying wpa_supplicant.
* patches/
- 12_ipw_open_aps (closes: #295143)
+ merge patch against driver_ipw to fix association with
open access points.
-- Kyle McMartin <email address hidden> Tue, 15 Feb 2005 00:51:28 -0500
| 1 → 59 of 59 results | First • Previous • Next • Last |
