linux-oem 4.15.0-1010.13 source package in Ubuntu

Changelog

linux-oem (4.15.0-1010.13) bionic; urgency=medium

  * linux-oem: 4.15.0-1010.13 -proposed tracker (LP: #1779357)

  * xhci_hcd 0000:00:14.0: Root hub is not suspended (LP: #1779823)
    - usb: xhci: dbc: Fix lockdep warning
    - usb: xhci: dbc: Don't decrement runtime PM counter if DBC is not started

  * xhci hangs; reset results in NULL pointer dereference (LP: #1763594)
    - xhci: Create new structures to store xhci port information
    - xhci: set hcd pointers for xhci usb2 and usb3 roothub structures
    - xhci: Add helper to get xhci roothub from hcd
    - xhci: xhci-hub: use new port structures to get port address instead of port
      array
    - xhci: xhci-hub: use new port structures for cas and wake mask functions.
    - xhci: xhci-ring: use port structures for port event handler
    - xhci: rename faked_port_index to hcd_portnum
    - xhci: change xhci_set_link_state() to work with port structures
    - xhci: change xhci_test_and_clear_bit() to use new port structure
    - xhci: use port structures instead of port arrays in xhci.c functions
    - xhci: xhci-hub: use port structure members instead of xhci_get_ports()
    - xhci-mtk: use xhci hub structures to get number of ports in roothubs
    - xhci: xhci-mem: remove port_arrays and the code initializing them
    - xhci: debugfs: add usb ports to xhci debugfs
    - xhci: debugfs: add debugfs interface to enable compliance mode for a port
    - xhci: Fix perceived dead host due to runtime suspend race with event handler

  * Use "Medium power with Device Initiated PM" as default LPM policy for mobile
    SATA devices (LP: #1778029)
    - ahci: Allow setting a default LPM policy for mobile chipsets
    - Config: set CONFIG_SATA_MOBILE_LPM_POLICY to med_power_with_dipm

  * Miscellaneous Ubuntu changes
    - Rebase to 4.15.0-26.28

  [ Ubuntu: 4.15.0-26.28 ]

  * linux: 4.15.0-26.28 -proposed tracker (LP: #1780112)
  * failure to boot with linux-image-4.15.0-24-generic (LP: #1779827) // Cloud-
    init causes potentially huge boot delays with 4.15 kernels (LP: #1780062)
    - random: Make getrandom() ready earlier

  [ Ubuntu: 4.15.0-25.27 ]

  * linux: 4.15.0-25.27 -proposed tracker (LP: #1779354)
  * hisi_sas_v3_hw: internal task abort: timeout and not done. (LP: #1777736)
    - scsi: hisi_sas: Update a couple of register settings for v3 hw
  * hisi_sas: Add missing PHY spinlock init (LP: #1777734)
    - scsi: hisi_sas: Add missing PHY spinlock init
  * hisi_sas: improve read performance by pre-allocating slot DMA buffers
    (LP: #1777727)
    - scsi: hisi_sas: use dma_zalloc_coherent()
    - scsi: hisi_sas: Use dmam_alloc_coherent()
    - scsi: hisi_sas: Pre-allocate slot DMA buffers
  * hisi_sas: Failures during host reset (LP: #1777696)
    - scsi: hisi_sas: Only process broadcast change in phy_bcast_v3_hw()
    - scsi: hisi_sas: Fix the conflict between dev gone and host reset
    - scsi: hisi_sas: Adjust task reject period during host reset
    - scsi: hisi_sas: Add a flag to filter PHY events during reset
    - scsi: hisi_sas: Release all remaining resources in clear nexus ha
  * Fake SAS addresses for SATA disks on HiSilicon D05 are non-unique
    (LP: #1776750)
    - scsi: hisi_sas: make SAS address of SATA disks unique
  * Vcs-Git header on bionic linux source package points to zesty git tree
    (LP: #1766055)
    - [Packaging]: Update Vcs-Git
  * large KVM instances run out of IRQ routes (LP: #1778261)
    - SAUCE: kvm -- increase KVM_MAX_IRQ_ROUTES to 2048 on x86

 -- Timo Aaltonen <email address hidden>  Thu, 05 Jul 2018 15:15:07 +0300