-
hplip (2.7.12-0ubuntu2~gutsy1) gutsy-backports; urgency=low
* Automated backport upload; no source changes.
hplip (2.7.12-0ubuntu2) hardy; urgency=low
* debian/patches/89_hplip-alloc.dpatch: The hpijs compression
module did not allocate enough memory (Upstream bug LP: #182658).
hplip (2.7.12-0ubuntu1) hardy; urgency=low
* Now upstream release
o PJL support for HP LaserJets for in-band status check
o New print modes for LJJetReady device class (HP Color LaserJet
3600/3500/3550).
o Improvement of plug-in download by hp-setup.
o Bug fixes, especially for fax.
o New models supported: HP LaserJet M2727 MFP (printing only, no
scanning or fax), HP LaserJet M1005 MFP (printing only, no scanning),
HP LaserJet 1000/1005, HP Color LaserJet 3600/3500/3550, HP LaserJet
9040.
* debian/rules, debian/45-hplip.rules, debian/check_mfp_printer: Removed
/etc/udev/rules.d/45-hplip.rules and check_mfp_printer, HP provides a
solution from upstream now.
* debian/55-hpmud.rules: Updated for compatibility with kernel 2.6.24 and
newer (Ubuntu bug LP: #181242).
* debian/patches/87_move_documentation.dpatch: Updated patch for new HPLIP
version.
hplip (2.7.10-5ubuntu1) hardy; urgency=low
* Merge with Debian unstable. No remaining Ubuntu changes.
* debian/rules: Added "--with-hpppddir=\$${prefix}/share/ppd/hpijs/HP" to
"./configure" call so that "hp-setup" will find the fax PPD (Ubuntu bug
LP: #59409).
* debian/rules: Removed "--dpkg-shlibdeps-params=--ignore-missing-info"
from dh_shlibdeps. Does not build under Ubuntu.
hplip (2.7.10-5) unstable; urgency=low
* Check for old init scripts [ -x /etc/init.d/hplip ] and manually
remove them before we call update-rc.d
- preinst fails: update-rc.d: /etc/init.d/hplip exists (Closes: #453902)
hplip (2.7.10-4) unstable; urgency=low
* Extremadura release ;-)
* Provide debian/shlibs lintian: shlib-missing-in-control-file
- FTBFS on amd64/sid (Closes: #453361)
* Rewrite hplip.preinst to not call killall
- predepend on psmisc (?) (Closes: #452408)
* Switch hplip.{pre,post}inst to use update-rc.d & invoke-rc.d
- maintainer-script-calls-init-script-directly (Closes: #452244)
* Cleanup hplip.menu
- please change default icon to /usr/share/pixmaps/HPmenu.xpm
(Closes: #415048)
* Remove Depends: sysv-rc
hplip (2.7.10-3) unstable; urgency=low
* Update debian/watch - thks Chris Lamb
- debian/watch file incorrect (Closes: #415926)
- debian/watch fails to report upstream's version (Closes:
#449610)
* debian/rules dh_shlibdeps --dpkg-shlibdeps-params=--ignore-missing-info
hplip (2.7.10-2) unstable; urgency=low
* Unstable upload
* debian/control
- Homepage: http://hplip.sourceforge.net/
- Vcs-Svn: svn://svn.debian.org/pkg-hpijs/hplip/trunk/
- Vcs-Browser: http://svn.debian.org/wsvn/pkg-hpijs/hplip/?op=log
hplip (2.7.10-1) experimental; urgency=low
* Shadow ubuntu release into debian experimental
- new upstream release (Closes: #413225)
* TODO inport into CVS/ SVN
hplip (2.7.10-0ubuntu1) hardy; urgency=low
* New upstream release
o hp-setup capable of loading non-free driver extensions from the
internet (usually from OpenPrinting)
o hp-sendfax problem of not being able add files fixed upstream
(LP: #153152)
o New models supported: HP Officejet Pro K8600, Photosmart C4380 Series,
LaserJet 1018, 1020, 1022, 1022n, 1022nw, Deskjet 550C
* No modification of the upstream source tarball needed any more.
* debian/patches/70_no_fail_on_bad_locales.dpatch: Removed, does not apply
to current upstream source code any more.
* debian/patches/90_subprocess_replacement.dpatch: Removed, fixed upstream.
* debian/control: Let hpijs depend on hplip (LP: #149511).
-- John Dong <email address hidden> Tue, 5 Feb 2008 02:30:41 +0000
-
hplip (2.7.7.dfsg.1-0ubuntu5.3) gutsy-security; urgency=low
* debian/hplip.postinst: Removed code to correct permissions of .hplip
personal config in user's home directories (Ubuntu LP: #191299).
-- Ansgar Burchardt <email address hidden> Thu, 18 Dec 2008 12:45:10 +0100
-
hplip (2.7.7.dfsg.1-0ubuntu5.2) gutsy-security; urgency=low
* SECURITY UPDATE: privilege escalation using the hplip alert-mailing
functionality.
- debian/patches/91_SECURITY_CVE-2008-2940.dpatch: fix handle_event()
in hpssd.py to validate device-uri parameter and disable
handle_setalerts(). This fix alters hplip behaviour by preventing
users from setting alerts and by moving alert configuration to a
root-controlled /etc/hp/alerts.conf file.
- CVE-2008-2940
* SECURITY UPDATE: denial of service in hpssd message parser.
- debian/patches/92_SECURITY_CVE-2008-2941.dpatch: fix handle_event()
in hpssd.py to correctly validate parameters.
- CVE-2008-2941
-- Marc Deslauriers <email address hidden> Thu, 20 Nov 2008 09:46:21 -0500
-
hplip (2.7.7.dfsg.1-0ubuntu5.1) gutsy-security; urgency=low
* SECURITY UPDATE: privilege escalation using the hplip alert-mailing
functionality.
- debian/patches/91_SECURITY_CVE-2008-2940.dpatch: fix handle_event()
in hpssd.py to validate device-uri parameter and disable
handle_setalerts(). This fix alters hplip behaviour by preventing
users from setting alerts and by moving alert configuration to a
root-controlled /etc/hp/alerts.conf file.
- CVE-2008-2940
* SECURITY UPDATE: denial of service in hpssd message parser.
- debian/patches/92_SECURITY_CVE-2008-2941.dpatch: fix handle_event()
in hpssd.py to correctly validate parameters.
- CVE-2008-2941
-- Marc Deslauriers <email address hidden> Tue, 18 Nov 2008 13:39:37 -0500
-
hplip (2.7.7.dfsg.1-0ubuntu5) gutsy; urgency=low
* SECURITY UPDATE: arbitrary command execution via network
* Add debian/patches/90_subprocess_replacement: use subprocess instead.
* References
https://launchpad.net/bugs/149121
CVE-2007-5208
-- Kees Cook <email address hidden> Thu, 11 Oct 2007 10:25:17 -0700
-
hplip (2.7.7.dfsg.1-0ubuntu4) gutsy; urgency=low
* debian/55-hpmud.rules: Changed UDEV rules to set owner "lp",
group "scanner", and permissions 0660 for the /dev/... files, so
that non-privileged users (not in "lp" group, but in "scanner"
group) can also access the HP printers. Simply using 0666
permissions is a security problem (LP: #147369).
-- Till Kamppeter <email address hidden> Thu, 4 Oct 2007 21:05:57 +0100
-
hplip (2.7.7.dfsg.1-0ubuntu3) gutsy; urgency=low
* debian/rules, debian/55-hpmud.rules:
Updated UDEV rules for HPLIP to the ones of HPLIP 2.7.9. The current
rules do not work any more (LP: #147369)
-- Till Kamppeter <email address hidden> Wed, 3 Oct 2007 16:05:57 +0100
-
hplip (2.7.7.dfsg.1-0ubuntu2) gutsy; urgency=low
* debian/control, debian/hplip.install, debian/hplip-gui.install,
debian/rules:
Moved menu entries for the GUI utilities into the new hplip-gui package.
This package requires python-qt3 and so the menu entries can never appear
if python-qt3 is not installed. Let the main package (hplip) recommend
hplip-gui instead of python-qt3 now. Fixes: LP: #67892, LP: #86893,
LP: #134480, LP: #137168
-- Till Kamppeter <email address hidden> Wed, 5 Sep 2007 10:05:57 +0100
-
hplip (2.7.7.dfsg.1-0ubuntu1) gutsy; urgency=low
* Modified upstream source tarball: Firmware files for HP LaserJet 1018
and 1020 removed on HP's request
* debian/control, debian/rules, debian/hplip-data.install,
debian/hplip-firmware.install: Removed hplip-firmware binary package.
* debian/README.Source: Updated packaging documentation
* debian/hpijs.README.Debian, debian/hpijs.NEWS, debian/hpijs-ppds.NEWS,
debian/hpijs.1, debian/control: linuxprinting.org -> openprinting.org
-- Till Kamppeter <email address hidden> Wed, 22 Aug 2007 20:41:57 +0100
-
hplip (2.7.7-0ubuntu4) gutsy; urgency=low
* debian/hplip.install: Added missing line "usr/lib/lib*.so.*" (LP: #132670,
LP: #132781)
* debian/hplip.preinst: Remove init scripts of former 1.x HPLIP versions
* debian/hplip.default: Removed, as we do not have permanently running
daemons any more.
* debian/hplip.rtupdate, debian/rules, debian/hplip.install: Removed update
helper, as we do not have permanently running daemons any more.
-- Till Kamppeter <email address hidden> Fri, 17 Aug 2007 15:40:55 +0100
-
hplip (2.7.7-0ubuntu3) gutsy; urgency=low
* debian/control: Added "automake" and "libtool" to "Build-Depends"
-- Till Kamppeter <email address hidden> Mon, 13 Aug 2007 15:40:55 +0100
-
hplip (2.7.7-0ubuntu2) gutsy; urgency=low
* debian/control: Added "autoconf" to "Build-Depends"
-- Till Kamppeter <email address hidden> Mon, 13 Aug 2007 09:40:55 +0100
-
hplip (2.7.7-0ubuntu1) gutsy; urgency=low
* New upstream release
* Closes: LP: #103871, LP: #109871
* HPLIP 2.7.7
+ Fixed issues with ppd_install and ppd_dir in the installer
+ Device-id and device-status queries can now be made on more than
just the 7/1/2 interface.
+ Added pre_install_cmd to installer to fix cups issue in PCLinuxOS
and Mandriva
+ Added darwin build support to makefile.
+ Removed the localOnly conditional in the sane hpaio backend. This
was needed for saned usage.
+ Fixed defect (Print Settings for fax device is incorrect after
switching to other tabs.)
+ Fixed defect (The default unload directory path is invalid if user
is root.)
+ Fixed defect (Wrong release dates for Fedora distros are displayed
in terminal.)
+ Added Mandriva 2007.1 to distros.dat
+ Added Ubuntu 7.10 to distros.dat
+ Fixed defect (Entering hp-setup -bnet command in terminal, some
error information occurs when network is unreachable.)
+ Fixed defect (hp-testpage produces traceback)
+ Added some additional error checking to type 3 status (LaserJets)
+ Re-designed hp-fab database backend (no longer uses KirbyBase,
instead uses pickle)
+ Converted hp-fab and hp-sendfax to handle non-ascii characters (Unicode)
+ Added a distros.dat flag to handle usermod command with/without -a
+ Added a temporary printer destination codepath for hp-scan
+ Enhanced hp-setup launch code for the text installer
+ Lots of code cleanup in the logging facility
+ Fixed the constraints system in hp-scan (can use list based and
tuple based constraints)
+ Removed '-a' from usermod command in installer
+ Converted code to use unicode when dealing with UI strings and
user originated strings
+ Explicitly convert to utf-8 for file logging output
+ Added compile flag conditional compilation in hpmudext.c for parallel
and network support
+ Fixed the run command in core_install so that exceptions wouldn't
pass silently
+ Enhanced get_distro() in core_install so that it handles lsb_release
output better
+ Fixed disable-pp-build and disable-net-build in hpmud.
+ Added localization files to tarball.
+ Various small bug fixes (esp. in the installer)
* HPIJS 2.7.7
+ Added support for the following new printer(s).
* HP PhotoSmart A620 Series (PSP470)
* HP PhotoSmart A820 Series (PSP470)
* HP PhotoSmart A520 Series (DJGenericVIP)
* HPLIP 2.7.6
+ Major version number change denotes new functionality.
* No more Start-up daemons
* New Direct Device I/O (hpmud)
* Controllable Permissions
* Single 'Make' File
* Support for Dynamic PPD file generation
* New hp-scan command
+ Replaced hpiod with the new HP Multi-Point Transport Driver (hpmud).
Hpmud is a shared library instead of a daemon.
+ Hpssd is started automatically when needed by HPLIP.
+ Removed HPIJS makefile. There is now only one makefile for HPLIP.
+ Added the following new HPLIP configure options.
--enable-doc-build enable documentation build (default=yes)
--enable-hpijs-only-build enable hpijs only build (default=no)
--enable-foomatic-ppd-install enable foomatic ppd install, uses
hpppddir default=no
--enable-foomatic-xml-install enable foomatic xml install, uses
foomaticdir default=yes
--with-cupsbackenddir=DIR set cups backend install directory,
default=/usr/lib/cups/backend
--with-icondir=DIR set icon install directory,
default=/usr/share/applications
--with-hpppddir=DIR set hp ppd install directory,
default=datadir/ppd/HP
--with-docdir=DIR set hplip documentation directory,
default=datadir/doc
--with-foomaticdir=DIR set foomatic db install directory,
default=datadir/foomatic
+ Old HPIJS configure options --foomatic-install and --cups-install
have been removed.
+ Changed the libsane-hpaio install directory from $(libdir) to
$(libdir)/sane.
+ Fixed installer utilities (permission, trigger, etc) so they can be
run manully from tarball root directory
+ Fixed defect (Some error occurs in terminal and the outputting file
is empty when perform a scan job with the option "-mgray".)
+ Added large file size warning to hp-scan
+ Added -x/--compression to hp-scan
+ Added 1200, 2400, and 4800 dpi support to hp-scan
+ Fixed defect (Traceback - SUSE 10.1 - Changing Tabs To Print Settings)
+ Fixed defect (Using hp-clean on cmd line fails to clean)
+ Changed fax check so that low paper or low supplies don't prevent
faxing [user reported]
+ Toolbox will display local docs if doc-build=yes or sf.net docs if
doc-build=no
+ Added hp-unload file removal option
+ Changed hp-unload progress to a sep. dialog
+ Fixed an issue with hp-check with 'lp' group test
+ Added libtool and libgphoto2-devel packages for the libtool
dependency for SUSE 10.2
+ Fixed defect (The files can not be rendered when perform a fax job in
terminal on Mepis6.0 OS.)
+ Added new functionality into the web installer from the text
installer a) New data functions b) pre- and post- build actions ('lp'
group, udev trigger, etc) c) Some defensive code enhancements
+ Fixed defect (The scan job is failed if --printer is specified when
use "hp-scan" command in non-interactive mode.)
+ Fixed defect (Mepis and Debian unsubscriptable object on Toolbox launch)
+ Fixed an issue with stopping the hpssd process in the installer
+ Added PIL as an optional dependency to the installer
+ Fixed a couple of text installer issues that were casuing a traceback
+ Fixed libtool detection
+ Fixed defect ( Toolbox Looses Communication with Printers after
Functions->Unload Photo Card)
+ Fixed defect (Fax Address Book - fab.db - unable to open or read file)
+ Added --size=<page size name> parameter to hp-scan
+ Added ppd_dir data to debian, mepis, suse in distros.py
+ Fixed 2.7.x jetdirect scanimage issue reported by Suse.
+ Fixed defect (The installation is failed if packages are missing when
install with command "./hplip-install" on Mandriva2007 32bit OS.)
+ Fixed defect (The Installer process can not setup printer after
finishing installation on Ubuntu 7.04 OS.)
+ Added the symlink fix Dapper to the text installer
+ Fixed an issue with the hppsd process shutdown
+ Added libtool dependency to installer
+ Made all configure time python checks conditional on hpijs-only-build
as requested by Suse.
+ Added USB devnode permission checks to hp-check
+ Enhanced USB I/O checks in hp-check
+ Added udev .rules file modification module, installer/permissions.py
(called by the installer)
+ Fixed defect (The Installer process can not setup printer after
finishing installation on Ubuntu 7.04 OS.)
+ Added 'ppd_dir' to text installer
+ Added "add user to lp group" to text installer
+ Added hpssd shutdown to text installer
+ Fixed a problem with the configure flags in the installer
+ Added a root user check to the text installer
+ Cleaned up the text formatting in the installer
+ Added some distro data convenience functions in the installer
+ Added a check for adept-updater on Ubuntu
+ Fixed the HPLIP detection function
+ Changed the launching of hp-setup so that the entered su/sudo
password is used
+ Changed the CUPS restart so that it only occurs with CUPS 1.1.x
+ Added the logoff required step in the installer
+ Added configure option --with-docdir as requested by Suse.
+ Added CUPS version check to hp-check (requires cups-config)
+ Added '-p' param to hp-check (pre-check, use before install. Run
hp-check w/o -p after install.)
+ Added USB I/O checks to hp-check
+ Fixed defect (The Unload Photo Card function is invalid) [fixed
error in hpmudext read channel API]
+ Fixed defect (An error occurs in terminal when manually find a network
printer with a numerical type hostname.)
+ Fixed defect (some error message displays in terminal when enter
"hp-print" command if no device is installed.)
+ Fixed defect (Print command is failed when perform a print job if
printers have characters "&", "*", "(", ")", "|", "<", ">", ","
or "." in their names.)
+ Fixed defect which was an issue with displaying non-readable
characters in the progress screens.
+ Fixed defect (An error occurs when execute "hp-align -bnet" command
in terminal.)
+ Added CUPS 1.1 detection and setting of configure flags and paths
+ Fixed the enable_ppd flag and made it dependent on CUPS 1.1 detection
+ Fixed a problem in the text installer that caused it to exit if no
dependencies were installed
+ Added a trigger utility so that USB devices will be detected after
the .rules files updates occur without replugging (added only to text
installer for now)
+ Fixed defect which was an issue in canceling the installation process
in the progress screens.
+ Fixed defect (Bad usability is brought if the Auto Refresh function is
enabled.)
+ Fixed defect (The auto refresh can be enabled by click the OK button
on Settings window.)
+ Fixed defect which was an issue in the script that runs the install
options of the GUI installer.
+ Changed location of all user files to ~/.hplip/ directory (fax files,
hplip.conf, and fab data file)
+ Added sane-devel to installer dependencies
+ Made the ppd_install flag be per distro and version rather than just
for distro due to Fedora 5/6
+ Removed LSB dependency info from each distro dataset
+ Fixed defect (The send fax job can not performed successfully over
network)
+ Added printer list to toolbox status bar [partially fixes user request]
(defect)
+ Fixed defect (Some error messages displayed in terminal when executing
hp-sendfax command in terminal.)
+ Fixed defect (The hp-setup is invalid if disable GUI option during
install the build.)
+ Added bootstrap --ppd to build.py and dist.py
+ Fixed defect (The check job can not be finished completely before
install the build.)
+ Added udev 55-hpmud.rules to "make install". Users will have to be a
member of the "lp" group in order to have access USB/Parallel devices.
+ Fixed hp-makeuri and underlying API
+ Fixed defect (Toolbox cannot be launched if the build
hplip-2.7.5.6-shadow is installed with PC Send Fax option disabled
via GUI Installer.)
+ Added libsane check at configure time.
+ Fixed models.dat and models dat editor tool for hpmud support
+ Added HPLIP_BUILD to dat editor tool
+ Fixed defect (adding unsupported file type to fax causes traceback)
+ Improved build time support for missing Python extensions
+ Added MakeURI APIs to hpmudext
+ Removed hpiod and hplip start/stop script.
+ Fixed defect (An error occurs in terminal when perform a copy job with
Best Copy Quality in GUI mode.)
+ Fixed defect ([Photosmart 7550] no photo cart, clicking color cal
causes traceback)
+ Fixed defect (hpssd.py crashed with IOError in __init__() [Launchpad
bug #103871])
+ Fixed defect (toolbox crashed with AttributeError in
printButton_clicked() [Luanchpad bug #109871])
+ Preliminary version of hp-scan checked in (ver. 0.1 -lots of missing
features)
+ Changed to hpssd auto start functionality to use port detection rather
than .pid/.port files. Hpssd no longer supports dynamic port
assignments. Its is recommended that only the IANA port as specified
in hplip.conf be used (port 2207). Hpssd does not create any .pid or
.port files in /var/run or /tmp.
+ Added a missing file 'warnings.tmpl' to the Makefile.am.
+ Fixed defect (toolbox crashed with IndexError in UpdatePrinterCombos()
[launchpad])
+ Flated the postscript ppd directory foomatic-db/db/source/PPD/HP/.
+ Fixed defect (Some error messages displayed in terminal when executing
hp-sendfax command in terminal.)
+ Changed build and dist scripts so that they work with new unified
makefile and ppd/xml changes
+ Changed text (CLI) installer to work with new unified makefile and
ppd/xml changes
+ Fixed defect (No prompt pops up if execute hp-unload in terminal when
add the device Deskjet d1460 to PC which does not support Photo Unload
function.)
+ Fixed defect (The prompt dialog does not pop up when adding a
unsupported file type to the printer from toolbox.)
+ Fixed defect (A spelling mistake is found in Functions tab of Configure
window.)
+ Fixed defect (Some controls are not fully displayed on Print Control
table of toolbox.)
+ Added HP specific foomatic database to tar ball. This will allow
foomatic db installs or PPD installs.
+ Removed code for screen that shows the optional path installation
(defect).
+ Merged new hpssd autostart code
* HPIJS 2.7.6
+ Removed ESC*p command from DJGenericVIP class for each raster send to
fix PhotoSmart C4200 assert
+ Added support for the following new printer(s).
* HP Photosmart C4200 series (DJGenericVIP)
* HP Photosmart A320 series (DJGenericVIP)
* HP Photosmart A440 series (DJGenericVIP)
* HP Color LaserJet CM4730 MFP (LJColor)
* HP Color LaserJet CP3505 (LJColor)
* LaserJet P2010 (LJMono)
* HP Photosmart C5200 series (DJGenericVIP)
* HP 910 (DJ3320)
* HP 915 (DJ3600)
* HPLIP 1.7.4
+ Fixed defect (The tip of menu "Contents..." is incorrect.) [added F1
accelerator]
+ Fixed defect (The corresponding operation could not work while
executing hp-sendfax with "--non-interactive", "--faxnum",
"--recipient", "--group", "--logging" parameters in terminal.)
+ Fixed an issue with adding recipients in fax UI
+ Fixed defect (The array of the Comments/Notes can not be consistent
with that in fax coverpage.) [check "Preformatted" in coverpage dialog
to preserve formatting]
+ Fixed defect (hp-makecopies --quality parameter is invalid.)
+ Fixed defect (The printer information still displays on Toolbox when
refresh the device status after delete the Device.)
+ Fixed a problem reading USB IEEE 1284 device-id on the Photosmart A420
based products in hpiod.
+ Toolbox internal/built-in makecopies utility
+ Reworked the user settings code in the toolbox
+ Added PYTHONINCLUDEDIR configure option.
+ Removed hplip install code from "make install". Hplip install code is
part of the tarball only.
+ Fixed defect (Fax Address with blank nickname and blank fax number can
be added to the Fax Address Book.)
+ Fixed defect (Some improper messages display in terminal when add a
device via Network to a PC that is disconnecting with Network.)
+ Fixed defect (The word "from" is missing in "Unload Photo Card"
section on Functions tab on Toolbox.)
+ Added icons to action buttons in the toolbox
+ Fixed defect (The rendering files process hangs up when perform a fax
job)
+ Fixed defect (Some unexpected message displayed in terminal when
sending a fax job to a group)
+ Removed setup.py calls from Makefile.am. Automake now installs python
extensions.
+ Toolbox internal/built-in unload photo card utility
+ Fixed an issue with align type 10 (and 11) that caused the wrong
alignment values to be sent from the GUI alignment tool (hp-align was
OK) [reported by user]
+ Fixed the issue with .hplip.conf owner of root when hp-setup is run
1st [patch to Till]
+ Added some extra exception handling around device opens in
scrolltoolview
+ Fixed defect (No any hint information to show the printer is stopped
when enter hp-print command in terminal to launch a print job.)
+ Fixed defect (Toolbox can not display the print queue if switch to
other tab and then go back to the print tab.)
+ Fixed defect (Another print job can not be sent to print queue
successfully during printing.)
+ Fixed defect (Some unexpected information displays in terminal when
perform a color carlibration job on Photosmart 2575 in GUI mode.)
+ Added order column and move up/down to hp-print
+ Toolbox internal/built-in send PC fax utility
* HPIJS 2.7.4
+ Fixed a custom paper size bug that caused unintended scaling in
certain cases in services.cpp
+ Added supply level low warning message in hpijs.cpp as suggested by
Tim Waugh
+ Added support for the following new printer(s):
* DeskJet D1400 Series (DJ3320)
* DeskJet D2400 Series (DJ3600)
* DeskJet D4200 Series (DJ4100)
* DeskJet F2100 Series (DJ3320)
* DeskJet F4100 Series (DJ3600)
* CM8050MFP with Edgeline (PS)
* CM8060MFP with Edgeline (PS)
* Simplified the packaging making every change done by dpatches and not
directly in the source code.
o Dropped source code cosmetics in configure.in and Makefile.am
o Dropped moving .py files into /usr/lib. These files and also the
.pyc files generated from them are distribution-independent.
o 85_rebuild_python_ui.dpatch: Moved changes for compiling .ui files
to .py files into a dpatch
o 87_move_documentation.dpatch: Moved changes for moving the
documentation into a dpatch
o debian/rules: Set documentation directory by the "./configure"
command line.
* Removed patches 80_laserjet1100_fix.dpatch,
82_scrolltool_py_deskjet_d4100_claen_device_not_found.dpatch,
84_align10form_py_deskjet_5440_head_align.dpatch, merged upstream.
* 70_no_fail_on_bad_locales.dpatch: Rediff.
* debian/rules: Updated command line options for ./configure, make
debian/autogen.sh being called when Makefile.am and/or configure.in
were patched.
* debian/rules, debian/hplip-data.links: Do not put .py and .pyc files
into /usr/lib/hplip any more. There are REALLY plattform-independent.
* debian/control, debian/rules, debian/hplip-data.install,
debian/hplip-firmware.install: Created new package for the firmware files
for the HP LaserJet 1018 and 1020.
* debian/hplip.preinst: Shut down the daemons of the old 1.x.x generation
HPLIP and kill hpiod if the shut down did not work.
* debian/*.desktop: Show the icons in the menus of Ubuntu/Xubuntu/Edubuntu,
as we get a decent error dialog if PyQt is not installed.
-- Till Kamppeter <email address hidden> Thu, 9 Aug 2007 18:30:55 +0100
-
hplip (1.7.3-0ubuntu4) gutsy; urgency=low
* Restore Scott's change from 0.9.11-2ubuntu3 in Edgy, apparently lost
along the way:
- Remove stop links from rc0 and rc6.
-- Colin Watson <email address hidden> Wed, 25 Jul 2007 09:03:13 +0100
-
hplip (1.7.3-0ubuntu3) gutsy; urgency=low
* debian/control: Remove version numbers from libsnmp-dev build
dependency, so that package builds with arbitrary versions of
libsnmp.
-- Till Kamppeter <email address hidden> Thu, 31 May 2007 15:30:55 +0100
-
hplip (1.7.3-0ubuntu2) gutsy; urgency=low
* debian/control: Make the dependencies of the "hpijs" package also be
satisfied by "ghostscript" instead of only "gs-...", due to "gs-gpl"
having been renamed to "ghostscript" after the ESP/GPL Ghostscript
merger.
-- Till Kamppeter <email address hidden> Thu, 24 May 2007 11:30:55 +0100
-
hplip (1.7.3-0ubuntu1) feisty; urgency=low
* New upstream release (closes: LP#82546, LP#83936, LP#85805, LP#87695,
LP#92237, LP#94013, LP#94015, LP#94823, LP#95489)
* HPLIP 1.7.3
+ Added the <nopjl /> tag to hpijs-generator.in. This will remove
the extra foomatic PJL options from most HP LaserJet PPD
files. The extra foomatic PJL options caused some HPIJS PCL data
issues. This fixes a "PCL XL error" on LJ1010/1012 that can
occur on different PCs (closes: LP#92237).
+ Fixed defect (An error occurs when send a fax coverpage with "&"
or "<" character in Regarding or Optional Message field.)
+ Removed banner pages from fax print settings
+ Altered hpfax: device discovery output to match hp: scheme (CUPS
1.2 only)
+ Removed the wait cursor during the password entry screen
[reported by Johannes]
+ Added error messages and suppressed content in toolbox when
device is not found or unsupported
+ A new configure option was added --enable-cups11-build, this
option controls the hp/hpfax device discovery message when no
devices are found. If needed, this option provides backward
compatibility with CUPS 1.1.x applications.
With --enable-cups11-build set the "no_device_found" message is
displayed during device discovery by the "hp" backend.
With --disable-cups11-build (default) set the backend prints a
scheme based on the following conditions.
Condition 1 - no daemons
output nothing stdout return exit 1
Condition 2 - daemons running, no HP devices, output scheme
direct hp "Unknown" "HP Printer (HPLIP)" return exit 0
Condition 3 - daemons running, HP printer found, output URI
direct hp:/... "hp model" "HP model HPLIP" "deviceid"
return exit 0
(closes: LP#87695)
+ Changed the way that hp-setup was being launched from the
toolbox, it was hanging on Edgy
+ Added Tools > Printer Information
+ Added a check for 'lpr' for Debian installation (to force
install of cupsys-bsd)
+ Moved the password prompt in the text/CLI installer past the
distro confirm/select prompts to handle a problem with Mepis
+ Made a change to determine if networking is working during
installation.
+ Added a private copy of sanei_init_debug to libsane-hpaio. This
will remove the libsane.so dependency which was a problem for
WINE.
+ Fixed defect (PPD file "foomatic:HP-PSC_2400-hpijs.ppd" can not
be found when set up PSC 2400 in interactive mode, closes
LP#95489)
+ Fixed a page update defect in the toolbox (when switching
devices, update page correctly)
+ Re-wrote hpaioAdvanceDocument function in libsane-hpaio. This
change only effects SCL scanners with an ADF (ie: inkjet
all-in-ones). This fixes a double-feed ADF issue which occurred
when scanning a single page.
+ Fixed defect (An unexpected error occurs when perform color
calibration job in GUI mode on photosmart c7180.)
+ Some toolbox UI improvements
+ Converted hp-print to new UI
+ Fixed some defects in scrollprintview and devmgr
+ Added network detection to text/CLI installer
+ Toolbox internal/built-in print utility
+ Added password entry and validation to text/CLI installer
+ Fixed an issue when the ~/.hplip.conf file is not present on 1st
run, the hp-setup run as root owns the file and doesn't allow the
regular user to write to it.
+ Fixed defect (hp-setup -i can not setup a printer Photosmart
c3100 which has multiple possible PPD files.)
+ Some visual updates to the toolbox
+ Fixed defect (DJ 4x0 power/battery settings not staying set)
+ Added a confirmation dialog to device remove in the toolbox
+ Linked quality and printoutmode in print settings
+ Switched [x] Enable style controls to (*) On ( ) Off style in
print settings
+ Supply icons auto generate (removed supply PNG icons from
data/images)
+ Fixed an issue with r_values in supplies processing
+ Added type 12 head support for PS33xx, PSC61xx, etc.
+ Fixed defect (The Print Settings of Fax device are invalid)
+ Fixed issue where L7xxx color cal wasn't showing the load paper UI
+ Fixed defect (The command "hp-setup -i" can not work normally)
+ Fixed defect (The setup process will hang up when modify the fax
name to a name which contains more than 104 characters on setup
UI.)
+ Changed magic.py to better handle text/plain vs. data detection
+ Added last used working directory support to hp-sendfax,
hp-print, and hp-unload
* HPLIP 1.7.2 (Not published as Ubuntu or Debian package)
+ Fixed defect (The fax file is printed out by the sender when use
printer name with "-p" parameter to perform a fax job.)
+ Added CUPS fax queues to Print Settings and Print Control tabs
+ Added PQ Diag type 2, align type 12, color cal type 6, and LF
cal type 2 for Officejet Pro L7xxx
+ Added agent types 20 and 21 for Officejet Pro L7xxx
+ Fixed defect (There is no response when click "About" in the
"Help" menu in the toolbox window.)
+ Fixed defect (Function Commands configuration was disabled)
+ Fixed an issue where the ending banner page combo box would not
show the proper setting if it were not 'none'
+ Fixed defect (An error occurs when select other ppd files from
toolbox to setup)
+ Fixed defect (The command "hp-setup -i" can not work normally)
+ Fixed defect (The output of "-t" parameter is not the same as
"--prettyprint" parameter when send a fax job using pretty
printing for text files.)
+ Fixed defect (An error occurs when enter "#" in Fax Name field
on "Enter Printer Information" window during setting up a
printer.)
+ Fixed defect (Print outcomes are not full when set the "Page
Orientation" as "Landscape" on "Print Settings" table.) [added
"Fit to page" option in image printing section of Print Settings
tab.]
+ Moved installer/images/xxx files from SCRIPT to DATA install in
Makefile.am.
+ Fixed non-functioning printer control in hp-toolbox
+ Fixed an issue with the settings dialog not working [reported by
Johannes]
+ Additional fixes to get PPD file handling working on Edgy and
Feisty for CUPS 1.2.
+ Fixes for CUPS 1.2 and auto-generated PPD files for Feisty Fawn
[reported by Till] (closes: LP#95489)
+ Fixed potential subscript array overflow in pcard/fat.c
(reported by Suse).
+ Fixed an issue reported by Till with the device string returned
by hpfax:
+ Fixed an issue in in the NoDeviceForm (missing __tr() method)
+ Fixed defect (Ubuntu Fiesty Herd 3 - ppd file w/hp-setup
problem) [implemented change to PPD file enumeration for CUPS 1.2
as suggested by Till] (closes: LP#95489)
+ Added banner pages to print settings (job-sheets)
+ Fixed problem with watermark angle text in print settings (utf-8
decoding)
+ Added libusb-devel check to configure.in.
+ Added image printing settings to toolbox print settings
+ Added print adjustment settings to toolbox print settings
+ Enhanced the default button behavior in toolbox print settings
+ Removed sticky print settings from hp-print
+ hp_laserjet_p2015_series: Changed embedded-server-type from '0'
to '1'
+ hp_laserjet_p2015_series: Changed panel-check-type from '0' to '1'
+ Fixed a traceback in hpfax: if HPLIP is not running during
device detection (closes: LP#83936)
+ Added print job icons to indicate print job status
+ Updated some status icons
+ Fixed defect (An unexpected error occurs when enter hp-makecopies
-d<device-uri> -m1 -n in terminal)
+ Fixed defect ("See Also:hp-colorcal" should not occur in the
explanation for the hp-colorcal command on hplip website.)
+ Fixed defect (Refresh All button can not work on build
hplip-1.7.1 public release.)
+ Fixed an issue in hpssd that caused history items in the ring
buffer to slotted incorrectly
+ Added duplexer detection to the "sides" setting in the toolbox
Print Settings (no "sides" selection if duplexer == 0)
+ Added new, more useful icons to the status list in the toolbox
+ Major toolbox (Device Manager) upgrade/redesign
+ Added printer settings tab (sets printer options in
~/.cups/lpoptions)
+ Removed panel tab (merged panel with status tab)
+ Redo of functions tab (new layout)
+ Redo of status tab (new icons, layout, inclusion of front panel
display)
+ Front panel display will show device panel if available,
otherwise most recent status text
+ Redo of supplies tab (new layout)
+ Redo of print jobs tab (now called printer control) (print
control widget, new layout, etc)
+ hpssd will not store multiple history items with the same error
code (last one gets replaced)
+ About box upgraded
+ cupsext extended in functionality (ppd, options, etc)
+ Removed trailing white space in IEEE 1284 model name. This will
fix URIs that have a trailing "_" character in the model
name. This issue crept back into the hpiod code after the libusb
update (closes: LP#85805).
+ Fixed an issue in hp-check that caused a traceback if
'/etc/sane.d/dll.conf' is missing
+ Added some more bug messages to hpaio.
+ Fixed a traceback in hp-levels reported on the mailing list (defect)
+ Set the device list column width in the toolbox splitter to be
more narrow by default
+ Added the toolbox software version to the Device Manager about dialog
* HPIJS 2.7.2
+ Fixed media type for maxdpi printmode for vip printers and its
derivatives
+ Fixed the cause of carriage stall error in C41xx printers
+ Added support for the following new printer(s).
* Officejet Pro L7300 series (OJProKx50)
* Officejet Pro L7500 series (OJProKx50)
* Officejet Pro L7600 series (OJProKx50)
* Officejet Pro L7700 series (OJProKx50)
* HP Officejet Pro K5300 series (OJProKx50)
* HP Officejet Pro K5400 series (OJProKx50)
* HP Officejet J5700 series (DJGenericVIP)
OJProKx50 is derived from DJGenericVIP.
* 80_laserjet1100_fix.dpatch: Fixed problem of accessing an HP LaserJet 1100
on the parallel port (reported in LP#98520).
* 82_scrolltool_py_deskjet_d4100_claen_device_not_found.dpatch: Fixed problem
of Python traceback when DeskJet 4100 not accessible (e. g. turned off),
reported in LP#98520 by Aaron Albright.
* 84_align10form_py_deskjet_5440_head_align.dpatch: Fixed problem of head
alignment GUI not working for DeskJet 5440 (closes: LP#98920).
* Removed patches 00_01_hplevels_fix.dpatch,
80_hpijs_deskjet_d41xx_hangs.dpatch,
85_hpfax_crash_when_hpssd_not_running.dpatch,
90_hpfax_bad_lpinfo_-v_output.dpatch, merged upstream.
* Remade patch 14_charsign_fixes.dpatch, most of it was merged upstream.
* 61_noqt_message.dpatch: Improved error message which appears when
HPLIP utilities are called from the menu but PyQt is not installed
(closes: LP#86893)..
* Modified the debian/*.desktop files so that the environment variable
"STARTED_FROM_MENU=1" is set to make the utilities showing the
GTK-based error message window when called from the menu and PyQt is
not installed (closes: LP#86893).
* Added "NoDisplay=true" to the debian/*.desktop files so that the menu
entries for the HPLIP tools are hidden by default (closes: LP#67892).
* Fixed the pelling of the icon file names in the debian/*.desktop files
(closes: LP#88290).
* Removed debian/hp-toolbox.desktop, it was a duplicate menu entry for the
HP Toolbox.
* debian/hplip.postinst: Added clean-up for the ownerships of the user's
.hplip.conf files. hp-setup of HPLIP 1.7.1 (and perhaps some older
versions) created it with root ownerships and this made hp-toolbox not
starting (closes: LP#99326).
-- Till Kamppeter <email address hidden> Tue, 3 Apr 2007 16:40:55 +0100