-
linux-linaro (2.6.35-1010.17) maverick-proposed; urgency=low
[ Tim Gardner ]
* Stable updates tracking bug
- LP: #686071
[ John Rigby ]
* LINARO: [CONFIG] Enable CONFIG_PERF_EVENTS for all flavours
- LP: #683195
* LINARO: [CONFIG] Enable CONFIG_POSIX_MQUEUE for all flavours
- LP: #646419
[ Ubuntu Kernel ]
* Ubuntu-2.6.35-24.42
* Ubuntu-2.6.35-23.41
* Ubuntu-2.6.35-23.39
* Ubuntu-2.6.35-23.38
[ Upstream Stable Kernels ]
* Linux 2.6.35.7
* Linux 2.6.35.8
* Linux 2.6.35.9
[ linux-linaro-2.6.35 ]
* ARM: perf-events: squash compiler warning
* ARM: atomic64: use generic implementation for OABI configurations
* ARM: backtrace: fix calculation of thread stack base
* omap4: Update id.c and cpu.h for es2.0
* omap4: l2x0: Fix init parameter for es2.0
* omap4: Panda: Add DEBUG_LL support
* omap4: Fix bootup crash observed with higher CPU clocks
* Revert "Versatile Express: add support for local timers on CA9X4 daughterboard"
* Revert "Revert "Versatile Express: add support for local timers on CA9X4 daughterboard""
* omap: Use CONFIG_SMP for test_for_ipi and test_for_ltirq
* omap: Fix sev instruction usage for multi-omap
* USB: musb: Kill board specific pinmux from driver file
* ARM: Do not enable SWP emulation if CPU_V6 && CPU_V7
* omap3: id: fix 3630 rev detection
* mfd: Adding twl6030 mmc card detect support for MMC1
* omap4: pandaboard: fix up mmc card detect logic
* OMAP4 ES2: HSMMC soft reset change
* omap4 hsmmc: Fix the init if CONFIG_MMC_OMAP_HS is not set
* omap4: pandaboard: Fix the init if CONFIG_MMC_OMAP_HS is not set
* ARM: oprofile: fix merge conflict introduced by cd2cc211
* ARM: Fix find_next_zero_bit and related assembly
* OMAP3: PRCM: Consider UART4 for 3630 chip in prcm_setup_regs
* OMAP clock: Add uart4_ick/fck definitions for 3630
* OMAP3: serial: Fix uart4 handling for 3630
- LP: #627512
* omap: serial: Fix the boot-up crash/reboot without CONFIG_PM
* OMAP: some definitions extracted from commit 046465b76a
linux-linaro (2.6.35-1009.16) maverick-proposed; urgency=low
[ Ubuntu Kernel ]
* Ubuntu-2.6.35-23.36
* Ubuntu-2.6.35-23.37
* Ubuntu-2.6.35-22.35
[ John Rigby ]
* LINARO: Update configs
- LP: #672656
* LINARO: Turn on and enforce PM CONFIG options
- LP: #672791
-- John Rigby <email address hidden> Thu, 02 Dec 2010 23:23:56 -0700
-
linux-linaro (2.6.35-1008.15) maverick-proposed; urgency=low
[ Robert Nelson ]
* SRU: Fix DVI for Beagle xM rev A3
- LP: #663642
linux-linaro (2.6.35-1008.14) maverick-proposed; urgency=low
[ Andy Whitcroft ]
* reduce disk usage during buildd builds
- LP: #645653
[ Enric Balletbo i Serra ]
* ARM: igepv2: Adding support for VBUS and overcurrent
- LP: #651589
* ARM: igepv2: Fix and improve LED handling
- LP: #654582
* ARM: igepv2: Introduce function to dectect HW version
- LP: #654586
* ARM: igepv2: Fix handling of GPIOs for WLAN-BT combo
- LP: #654590
* ARM: igepv2: Add i2c eeprom driver to read EDID
- LP: #654594
* ARM: igepv2: Remove VMMC2 regulator
- LP: #654595
[ Maurus Cuelenaere ]
* SAUCE: ARM: OMAP3: Add S-Video output to IGEPv2 board
- LP: #607250
[ Upstream Stable ]
* Linux 2.6.35.7
[ Upstream MMC updates ]
* mmc: recognize CSD structure
* mmc: split mmc_sd_init_card()
* mmc: implement SD-combo (IO+mem) support
* sdhci: remove useless set_clock() check
* sdhci: 8-bit data transfer width support
* sdhci: don't assign mmc->caps at SDHCI directly
* mmc: only set blockaddressed for > 2GiB cards
* mmc: omap: fix for bus width which improves SD card's peformance.
* sdhci-pltfm: switch to module device table matching
* sdhci-pltfm: reorganize Makefile entries to support SoC devices
* sdhci-pltfm: add support for CNS3xxx SoC devices
* omap hsmmc: fix processing of all dma interrupts as block completion
* sdhci: add regulator support
* sdhci: add no hi-speed bit quirk support
* mmc: avoid getting CID on SDIO-only cards
* omap_hsmmc: remove unused local `state'
* omap hsmmc: fix a racing case between kmmcd and omap_hsmmc_suspend
* drivers/mmc/host/imxmmc.c: adjust confusing if indentation
* mmc: sdhci-pltfm: Add structure for host-specific data
* mmc: sdhci-pltfm: move .h file into appropriate subdir
* mmc: sdhci: introduce get_ro private write-protect hook
* mmc: sdhci_pltfm: pass more data on custom init call
* mmc: sdhci-of-esdhc: factor out common stuff
* mmc: sdhci-pltfm: add -pltfm driver for imx35/51
* mmc: quirk fix for timeout problem
* babbage: esdhc device registration
* babbage: update mx51_defconfig
- LP: #656966
[ Upstream ARM fixes ]
* Make PTRACE_SINGLESTEP work with user helpers
* ARM: fix section mismatch warnings in Versatile Express
* ARM: use memblock to remove memory from available memory
* video: omap: vram: remove from normal memory
- LP: #627779
[ John Rigby ]
* LINARO: update configs
- LP: #659799
linux-linaro (2.6.35-1007.13) maverick; urgency=low
[ Upstream Ubuntu ]
* Ubuntu-2.6.35-22.33
* Ubuntu-2.6.35-22.34
[ Upstream ARM Fixes ]
* ARM: vexpress: set RAM latencies to 1 cycle for PL310 on ct-ca9x4 tile
* ARM: vexpress: set RAM latencies to 1 cycle for PL310 on ct-ca9x4 tile
* ARM: add a vma entry for the user accessible vector page
* ARM: plug a race with the alignment trap handler
* arm: fix really nasty sigreturn bug
* ARM: prevent multiple syscall restarts
* ARM: 6387/1: errata: check primary part ID in proc-v7.S
* ARM: 6388/1: errata: DMB operation may be faulty
* ARM: 6389/1: errata: incorrect hazard handling in the SCU may lead to
data corruption
* ARM: 6398/1: add proc info for ARM11MPCore/Cortex-A9 from ARM
* kconfig: delay symbol direct dependency initialization
* ARM: kprobes-decode: add support for MOVW instruction
* ARM: errata: check primary part ID in proc-v7.S
* ARM: errata: DMB operation may be faulty
* ARM: errata: incorrect hazard handling in the SCU may lead to data
corruption
* ARM: errata: faulty hazard checking in the Store Buffer may lead to
data corruption
* ARM: Fix HWCAP_TLS flag for ARM11MPCore/Cortex-A9
[ Ricardo Salveti ]
* ARM: OMAP3: Add S-Video output to IGEPv2 board
- LP: #607250
* ARM: OMAP3: Adding vdd_sdi regulator supply to IGEPv2 board
- LP: #607250
[ Upstream Stable Releases ]
* 2.6.35.5
* 2.6.35.6
[ Upstream ftrace support ]
* ARM: 6312/1: ftrace: allow building without frame pointers
* ARM: 6314/1: ftrace: allow build without frame pointers on ARM
* ARM: 6315/1: ftrace: add ENDPROC annotations
* ARM: 6316/1: ftrace: add Thumb-2 support
* ARM: 6317/1: ftrace: pass KBUILD_CFLAGS to record_mcount.pl
* ARM: 6318/1: ftrace: fix and update dynamic ftrace
* ARM: 6319/1: ftrace: add Thumb-2 support to dynamic ftrace
* ARM: 6320/1: ftrace: enable dynamic ftrace
[ Nicolas Pitre ]
* ARM: implement CONFIG_STRICT_DEVMEM by disabling access to RAM via
/dev/mem
* ARM: bring SECCOMP behavior in sync with the version in mainline
* ARM: do not define VMALLOC_END relative to PAGE_OFFSET
[ John Rigby ]
* LINARO: Start new release
* LINARO: Bump ABI
* LINARO: update configs
-- John Rigby <email address hidden> Thu, 21 Oct 2010 11:01:14 -0600
-
linux-linaro (2.6.35-1007.13) maverick-proposed; urgency=low
[ Upstream Ubuntu ]
* Ubuntu-2.6.35-22.33
* Ubuntu-2.6.35-22.34
[ Upstream ARM Fixes ]
* ARM: vexpress: set RAM latencies to 1 cycle for PL310 on ct-ca9x4 tile
* ARM: vexpress: set RAM latencies to 1 cycle for PL310 on ct-ca9x4 tile
* ARM: add a vma entry for the user accessible vector page
* ARM: plug a race with the alignment trap handler
* arm: fix really nasty sigreturn bug
* ARM: prevent multiple syscall restarts
* ARM: 6387/1: errata: check primary part ID in proc-v7.S
* ARM: 6388/1: errata: DMB operation may be faulty
* ARM: 6389/1: errata: incorrect hazard handling in the SCU may lead to
data corruption
* ARM: 6398/1: add proc info for ARM11MPCore/Cortex-A9 from ARM
* kconfig: delay symbol direct dependency initialization
* ARM: kprobes-decode: add support for MOVW instruction
* ARM: errata: check primary part ID in proc-v7.S
* ARM: errata: DMB operation may be faulty
* ARM: errata: incorrect hazard handling in the SCU may lead to data
corruption
* ARM: errata: faulty hazard checking in the Store Buffer may lead to
data corruption
* ARM: Fix HWCAP_TLS flag for ARM11MPCore/Cortex-A9
[ Ricardo Salveti ]
* ARM: OMAP3: Add S-Video output to IGEPv2 board
- LP: #607250
* ARM: OMAP3: Adding vdd_sdi regulator supply to IGEPv2 board
- LP: #607250
[ Upstream Stable Releases ]
* 2.6.35.5
* 2.6.35.6
[ Upstream ftrace support ]
* ARM: 6312/1: ftrace: allow building without frame pointers
* ARM: 6314/1: ftrace: allow build without frame pointers on ARM
* ARM: 6315/1: ftrace: add ENDPROC annotations
* ARM: 6316/1: ftrace: add Thumb-2 support
* ARM: 6317/1: ftrace: pass KBUILD_CFLAGS to record_mcount.pl
* ARM: 6318/1: ftrace: fix and update dynamic ftrace
* ARM: 6319/1: ftrace: add Thumb-2 support to dynamic ftrace
* ARM: 6320/1: ftrace: enable dynamic ftrace
[ Nicolas Pitre ]
* ARM: implement CONFIG_STRICT_DEVMEM by disabling access to RAM via
/dev/mem
* ARM: bring SECCOMP behavior in sync with the version in mainline
* ARM: do not define VMALLOC_END relative to PAGE_OFFSET
[ John Rigby ]
* LINARO: Start new release
* LINARO: Bump ABI
* LINARO: update configs
-- John Rigby <email address hidden> Thu, 07 Oct 2010 17:58:05 -0600
-
linux-linaro (2.6.35-1006.12) maverick; urgency=low
[ John Rigby ]
* Revert "LINARO: [Config] workaround for kernel-wedge error on empty
udebs"
* LINARO: Start new release
* LINARO: no mouse-modules for linaro-vexpress
* LINARO: Add tools section to debian.linaro/control.stub.in
- LP: #643462
-- John Rigby <email address hidden> Mon, 20 Sep 2010 10:20:21 -0600
-
linux-linaro (2.6.35-1006.11) maverick; urgency=low
[ Upstream Kernel Changes ]
* ARM: vexpress: set RAM latencies to 1 cycle for PL310 on ct-ca9x4 tile
- LP: #633417
* ARM: add a vma entry for the user accessible vector page
* ARM: plug a race with the alignment trap handler
* ARM: SECCOMP support
[ John Rigby ]
* LINARO: rebase on linux-linaro-2.6.35-16Sep2010 and Ubuntu-2.6.35-22.32 merge
* LINARO: [CONFIG] igep ethernet fix
* LINARO: [CONFIG] turn do_tools on
- LP: #618734
-- John Rigby <email address hidden> Thu, 16 Sep 2010 18:03:14 -0600
-
linux-linaro (2.6.35-1005.10) maverick; urgency=low
[ Upstream Kernel Changes ]
* mmc: build fix: mmc_pm_notify is only available with CONFIG_PM=y
[ John Rigby ]
* LINARO: rebase on linux-linaro-2.6.35 and Ubuntu-2.6.35-20.29 merge
* LINARO: [Config] Turn on CONFIG_HIGHMEM for vexpress
* LINARO: Update Vcs-Git
* LINARO: add Recommends uboot-mkimage
- LP: #628848
-- John Rigby <email address hidden> Wed, 08 Sep 2010 10:03:22 -0600
-
linux-linaro (2.6.35-1004.9) maverick; urgency=low
[ Upstream Kernel Changes ]
* ARM: OMAP: Beagle: revision detection
- LP: #613855
* ARM: OMAP: Beagle: only Cx boards use pin 23 for write protect
- LP: #613855
* ARM: OMAP: Beagle: no gpio_wp pin connection on xM
- LP: #613855
* OMAP: DSS2: OMAPFB: use phys_to_virt for RAM mappings
- LP: #624115
-- John Rigby <email address hidden> Fri, 27 Aug 2010 20:27:29 -0600
-
linux-linaro (2.6.35-1004.8) maverick; urgency=low
[ John Rigby ]
* LINARO: rebase on linux-linaro-2.6.35 and Ubuntu-2.6.35-19.25 merge
-- John Rigby <email address hidden> Wed, 25 Aug 2010 19:46:17 -0600
-
linux-linaro (2.6.35-1003.7) maverick; urgency=low
[ John Rigby ]
* LINARO: [Config] Fix vexpress config
* LINARO: [Config] Add mx51 flavour
* LINARO: [config] Update vexpress config
Enable USB mass storage as a module
Enable SCSI disk support
-- John Rigby <email address hidden> Sun, 22 Aug 2010 21:29:44 -0600
-
linux-linaro (2.6.35-1002.6) maverick; urgency=low
[ Tim Gardner ]
* [Config] Find ABI files according to their source package name
* [Config] getabi: Only get armel omap and vexpress
[ John Rigby ]
* [Config] Changed flavour names from {omap,vexpress} to
linaro-{omap,vexpress}
-- Tim Gardner <email address hidden> Tue, 17 Aug 2010 15:57:51 +0100
-
linux-linaro (2.6.35-1001.5) maverick; urgency=low
[ John Rigby ]
* New upstream trees
Merge of linaro_merge_100811 and Ubuntu-2.6.35-15.21
Conflicts:
arch/arm/mach-omap2/board-4430sdp.c
linaro_merge_100811 added sdp4430_leds_gpio to sdp4030_devices
Ubuntu 2.6.35-15.21 added sdp4430_nop_usb_device to sdp4030_devices
resolution was to just add both
* Fold in packaging from 2.6.35-1000.4
* [Config] Update configs for new upstream
* omap3 nand: fix missing parameter to gpmc_prefetch_reset
-- John Rigby <email address hidden> Wed, 11 Aug 2010 14:20:28 -0600
-
linux-linaro (2.6.35-1000.3) maverick; urgency=low
[ John Rigby ]
* LINARO: cleanup debian.linaro control file
-- John Rigby <email address hidden> Tue, 03 Aug 2010 10:16:29 -0600