ecasound 2.8.1-1 source package in Ubuntu

Changelog

ecasound (2.8.1-1) unstable; urgency=low

  [ Alessio Treglia ]
  * New upstream release.
  * Disable alsa on non-linux archs.

  [ Alessandro Ghedini ]
  * Remove libecasound23, libecasound-dev and libecasound2.2-dev packages
    - Drop build-shared-libecasound patch
  * Drop handle_estrpipe patch (merged upstream)
  * Fix libkvutils4 section (libs, not libedevel)

ecasound (2.8.0-4) unstable; urgency=low

  * Remove symbols files.

ecasound (2.8.0-3) unstable; urgency=low

  * Set proper Replaces/Breaks fields on ecasound-doc.

ecasound (2.8.0-2) unstable; urgency=low

  [ Alessandro Ghedini ]
  * Add *.symbols for powerpc and sparc architectures (Closes: #627193).

  [ Alessio Treglia ]
  * 0006-handle_estrpipe.patch:
    - ESTRPIPE is not defined on kfreebsd, get around FTBFS on those
      architectures (Closes: #627192).
  * 1001-disable_python_tests.patch:
    - Disable python tests for now (Closes: #627191) since the Python module
      isn't able to detect the ecasound executable's version; it might
      be related to the terminal emulator as ecasound prints "colored"
      characters.
  * Add -DOC arch-indep package.
    - Build documentation only when Build-Depends-Indep are met.
  * Move ghostscript,hevea to Build-Depends-Indep.
  * Add myself as primary uploader (as-per-spec).

ecasound (2.8.0-1) unstable; urgency=low

  [ Alessandro Ghedini ]
  * New upstream release
  * Fix documentation building/installation
    - Remove doxygen and yodl from Build-Depends (not needed anymore)
    - Build-Depends on ghostscript (needed for building *.pdf files)
  * New maintainer. (Closes: #520271)
  * Build-Depends on libjack-dev (Closes: #527407)
  * Install upstream changelog (NEWS) with dh_installchangelogs
    not dh_installdocs
  * Switch to short-form dh
  * Drop libecasound7 package's files (package no more built)
  * Replace *.dirs with *.install and *.manpages, drop useless files
  * Bump debhelper compat level to 7
  * Fix debhelper dependencies
    - Add ${misc:Depends} to binary packages Depends
    - Add debhelper to Build-Depends
  * Maintainer is Debian Multimedia maintainers, add myself to Uploaders
  * Update Vcs-* fields, add Homepage field
  * Update binary packages descriptions
  * Drop old Provides and Conflicts (listed packages no more in the archive)
  * Fix packages sections
  * Remove self-Provides
  * Bump Standards-Version to 3.9.2 (no changes needed)
  * Add debian/clean for pyecasound/pyeca.pyc and
    pyecasound/ecacontrol.pyc files
  * Preserve file ecasound.spec on clean
  * Add fix-manpages-errors patch
  * Add build-shared-libecasound patch
  * Add libecasound23 package
  * Add build-shared-libecasoundc patch
  * Add libecasoundc1 package
  * Add build-shared-libkvutils patch
  * Add libkvutils4 package
  * Remove python-central Build-Depends (dh_python2 is used)
  * Do not compile pyecasound cext (not installed anyway)
  * Add transitional dummy packages for the old libecasound2.2-dev,
    libecasoundc2.2-dev, libkvutils2.2-dev and python-ecasound2.2
  * Move ecatools to standalone package to avoid circular dependency

  [ Joel Roth ]
  * Update debian/copyright
    - Unobfuscate email addresses
  * Add 'nama' to Suggests
  * Rename binary packages removing 2.2 suffix
  * Rename Source package, ecasound2.2 -> ecasound
  * Build-Depends: add headers for liboil, liblo (OSC) and libaRts support
  * override_dh_fixperms for *.py and *.rb libraries
  * Clarify that largefile support option applies to 32-bit systems
  * Update debian/copyright

  [ IOhannes m zmölnig ]
  * Fixed ecasound.1 manpage
  * One line per dependency for better readability

  [ Alessio Treglia ]
  * Use dh_python2 rather than pysupport.
  * Remove trailing command from the Depends field.
  * Adopt one-dep-per-line style.
  * Fix DH's syntax, otherwise the python2 add-on will be skipped.
  * Enable parallel builds.
  * When moving files, it's better to use Breaks+Replaces versioned fields.
  * Drop arts support.
  * Update symbols.

ecasound2.2 (2.7.0-1.1) unstable; urgency=low

  * Non-maintainer upload.
  * Change dependency on emacs flavours to emacsen; preserv emacs23 as a
    non-virtual alternative dependency (Closes: #562039)

ecasound2.2 (2.7.0-1) unstable; urgency=low

  * New upstream release.
  * Depend on libreadline-dev instead of libreadline5-dev by request of
    Mattias Klose. It's now libreadline6-dev. (closes: #553748)
  * Update menu file to use section Applications/ instead of Apps/.

ecasound2.2 (2.6.0-1) unstable; urgency=low

  * New upstream release
  - 08_fix_header_install: remove
  - 07_configure_in_maintainer_mode: update
  - do not install manpage copies, and just install symlinks for
    ecatools.1
  * Build-Depend on texlive-latex-recommended too for ecrm1000 font.
    (closes: #526535)

ecasound2.2 (2.5.2-3) unstable; urgency=low

  * yodl 2.13.1 removed --unique-output option. Remove --unique-output
    accordingly.

ecasound2.2 (2.5.2-2) unstable; urgency=low

  * Add Vcs-Git information
  * Update debian/copyright with upstream information.
  * fix typo in configure.in
    08_fix_header_install
  * add --unique-output options to yodl to fix manpage generation.

ecasound2.2 (2.5.2-1) unstable; urgency=low

  * New Upstream Version
  * Make debian/rules work with parallel build (test with -j5)

ecasound2.2 (2.4.6.1-2) unstable; urgency=low

  * Bug fix: "FTBFS with GCC 4.3: missing #includes", thanks to Martin
    Michlmayr (Closes: #454890).
  - 13_gcc4: updated

ecasound2.2 (2.4.6.1-1) unstable; urgency=low

  * New Upstream Version
  * Update dpatches:
  - 15_documentation_makefile: drop, included upstream
  - 13_gcc4: updated: mostly merged, one remaining. keep.

ecasound2.2 (2.4.5-7) unstable; urgency=low

  * run latex twice to make index work in documentation.
  - 15_documentation_makefile.dpatch

ecasound2.2 (2.4.5-6) unstable; urgency=low

  * really prefer emacs22 (Closes: #434913).

ecasound2.2 (2.4.5-5) unstable; urgency=low

  * ecasound-el: remove emacs-snapshot from list of dependencies.
  * Bug fix: "ecasound-el: please prefer emacs22", thanks to Tatsuya
    Kinoshita (Closes: #434913).
  * Build-Depend libwrap-dev -> libwrap0-dev

ecasound2.2 (2.4.5-4) unstable; urgency=low

  * ecasound-el: add emacs22

ecasound2.2 (2.4.5-3) unstable; urgency=low

  * "FLAC 1.1.4 library transition" (Closes: #426644).
  - Updated build-depends to depend on libsndfile1 1.0.17-2 or greater
  * Bug fix: "ecasound2.2: not binNMU-safe, uninstallable in unstable",
    thanks to Steve Langasek (Closes: #431095).

ecasound2.2 (2.4.5-2) unstable; urgency=low

  * Bug fix: "FTBFS with GCC 4.3: missing #includes", thanks to Martin
    Michlmayr (Closes: #417178), further updates to patch.

ecasound2.2 (2.4.5-1) unstable; urgency=low

  * new upstream release
  * build-depend on texlive
  * pbuilder-test: error code changed from '-1' to '1', so update test.

ecasound2.2 (2.4.4-7) unstable; urgency=low

  * Bug fix: "FTBFS with GCC 4.3: missing #includes", thanks to Martin
    Michlmayr (Closes: #417178).
  - 13_gcc4.3

ecasound2.2 (2.4.4-6) unstable; urgency=HIGH

  * Bug fix: "libecasound2.2-dev: missing dependency on libasound2-dev",
    thanks to Steve Langasek (Closes: #409438).

ecasound2.2 (2.4.4-5) unstable; urgency=low

  * Bug fix: "ecasound-el: Please add a depends against emacsen or
    emacs-snapshot", thanks to <email address hidden> (Closes: #403146).

ecasound2.2 (2.4.4-4) unstable; urgency=low

  * Bug fix: "FTBFS: Non-ascii character in input, consider using package
    inputenc", thanks to Martin Michlmayr (Closes: #396851).
    Remove the weird bit from documentation.

ecasound2.2 (2.4.4-3) unstable; urgency=low

  * Bug fix: "Python policy transition" (Closes: #373316).
  - Build-depend on python-dev instead of python2.4-dev
  - python-ecasound is arch all
  - fix description to remove reference to python 2.3
  - debian/rules: remove reference to python2.3 and use dh_pysupport instead of dh_python
  - remove existing byte-compilation handling from postinst/preinst.
  some of it thanks to Pierre Habouzit <email address hidden>
  * Bug fix: "ecasound2.2: FTBFS on kfreebsd-amd64: unsatisfied
    Build-Depends", thanks to Petr Salinger (Closes: #361469).
    add hurd-i386 to list
  * Standards-Version: 3.7.2
  * remove g++ versioned build-dependency, and add python-support (>=
    0.4.0) to build-dependency.
  * update watch file format
  * debian/rules clean config.log, config.status.
  * ecasound now has versioned depends on python-ecasound, since it was
    the original intention.

ecasound2.2 (2.4.4-2) unstable; urgency=low

  * Work with newer autoconf/automake ? which seems to be using more {}s.
  - 11_configure_in_alsa_fix: "FTBFS: ./configure: line 23306: syntax
    error near unexpected token `}'" (Closes: #377936).

ecasound2.2 (2.4.4-1) unstable; urgency=low

  * New upstream release
  - 10_unprotect_filename_with_comma: integrated upstream
  - 07_configure_in_maintainer_mode: update
  * fix pbuilder-test

ecasound2.2 (2.4.3-3) unstable; urgency=low

  * 10_unprotect_filename_with_comma: ecatools did not accept filenames with
    comma, but alsa devices are filenames starting with comma; accept them.

ecasound2.2 (2.4.3-2) unstable; urgency=low

  * make libasound2 optional for kFreeBSD (closes: #327648)

ecasound2.2 (2.4.3-1) unstable; urgency=low

  * New upstream release
  - fixes: ecasound freezes the computer under root with double buffering(closes: #317900)

ecasound2.2 (2.4.2-1) unstable; urgency=low

  * New upstream release
  * no longer generate ecasound2.2 transition package (closes: #321981)

ecasound2.2 (2.4.1-2) unstable; urgency=low

  * README.Debian: Note that arts is disabled
  * rebuild with readline5-dev
  - Bug fix: "use libreadline5-dev after sarge", thanks to Laurent Bonnaud
    (Closes: #292313).
  * Build-depend on g++ 4.0 or greater.
  * rebuild with jack 0.100 as build-depends
  - Bug fix: "libjack0.80.0-0 removed from unstable; rebuild required",
    (Closes: #317191).

ecasound2.2 (2.4.1-1) unstable; urgency=low

  * New upstream version
  - 01_ecasoundrc-location-fix: included in upstream
  - 07_configure_in_maintainer_mode: updated
  * removed refererence to artsc-dev
  * [debian/control, debian/rules] Use automake1.9
  * documentation is now in rst
  - add Build-Depends: python-docutils
  * debian/menu: quote
  * debian/watch: add

ecasound2.2 (2.4.0-1) unstable; urgency=low

  * New upstream release
  - fixes filename parsing code (closes #285265, #284312, #285264)
  - effect presets value eca:0.69 is now eca:69 (closes: #296505)
  * disable arts support temporarily since it doesn't build
  * debian/rules, debian/ecasound.manpages:
    use installman instead of installmanpages

ecasound2.2 (2.3.5-8) unstable; urgency=low

  * README.Debian: update upstream URL, and explain why the source package is
  thusly called. (closes: #284310)
  * TODO; update with current todo items.

ecasound2.2 (2.3.5-7) unstable; urgency=low

  * Typo fix: replaces libecasound7c -> libecasound7. (closes: #290630)

ecasound2.2 (2.3.5-6) unstable; urgency=low

  * libecasound2.2-dev should depend on libsndfile1-dev.
    (closes: #282226, #282229)

ecasound2.2 (2.3.5-5) unstable; urgency=low

  * ecasound-el depend on ecasound instead of ecasound2.2
  * 01_ecasoundrc-location-fix: fix patch so that effects_presets can be used.
    default 'ecasoundrc' was not modified correctly.

ecasound2.2 (2.3.5-3) unstable; urgency=low

  *  Build-dep on ruby

ecasound2.2 (2.3.5-2) unstable; urgency=low

  * Fix upgrade path from ecasound->ecasound2.2;
    replace libecasound7c102, libecasound7 packages since documentation has
    moved from these packages to ecasound package
  * upload to unstable
  - newer libtool is used than libtool1.4 (closes: #279389)
  - gcc-3.4 bug is not there anymore (closes: #266709)
  - largefile support is enabled (closes: #272551)
  - ICE on gcc apparently doesn't happen with ecasound2.2 (closes: #249804)
  - menu command is interactive (closes: #235560).
  - new upstream version is now uploaded to unstable (closes: #247746)

ecasound2.2 (2.3.5-1) experimental; urgency=low

  * New upstream release
  * debian/copyright: new upstream website/mail address.
  * Fixed 01_ecasoundrc-location-fix patch so that I can send it upstream.

ecasound2.2 (2.3.4-1) experimental; urgency=low

  * New upstream release
  * checked against Debian policy 3.6.1.
  * patch updates
    01_ecasoundrc-location-fix: keep
    07_configure_in_maintainer_mode: keep
  * libsndfile support added, we have new enough version now.
  * Bug fix: "ecasound2.2: menu command needs to call ecasound
    interactively", thanks to tim hall (Closes: #235560).
  * Add libecasound-ruby1.8 package
  - Add build-dep on ruby1.8
  - force-install to usr/lib/ruby/1.8 instead of /usr/local/

ecasound2.2 (2.3.2-1) UNRELEASED; urgency=low

  * New upstream release
  * patch updates
    01_ecasoundrc-location-fix: keep
    07_configure_in_maintainer_mode: keep
  * ecasound package
  * README.Debian: update notes on ecasound2.2
  * disable libsndfile support for now, since libsndfile 1.0.4 is not supported, requires 1.0.5
  * rebuild against jack 0.80.0

ecasound2.2 (2.3.1-2) unstable; urgency=low

  * Fix build failure of ecawave/ecamegapedal packages, backporting fix for 2.3.2
  some header files were missing
  - 08_fix_header_install.dpatch

ecasound2.2 (2.3.1-1) unstable; urgency=low

  * New upstream version
    - incorporates Debian patches, and minor fixes.
  * dpatch updates:
    01_ecasoundrc-location-fix: keep
    03_fix_unmatching_braces_in_ecasound_makefile_am: merged upstream
    04_ecasound_el_0.8.3: merged upstream
    05_audioio_jack_0.75_fix: merged upstream
    06_documentation_hevea: merged upstream
    07_configure_in_maintainer_mode: still applies, keep
  * debian/control: Build-Depends: add yodl

ecasound2.2 (2.3.0-5) unstable; urgency=high

  * add build-Depends on python to work around /usr/bin/python not being
    available when after installing python2.3-dev; dependency of
    python2.3-dev upon python is downgraded to recommends now.

ecasound2.2 (2.3.0-4) unstable; urgency=high

  * Fix build failure; do not include html.sty in documentation.
  * remove depcomp; old version seems to be incompatible with newer automake.

ecasound2.2 (2.3.0-3) unstable; urgency=HIGH

  * debian/control: Do not use latex2html, use hevea instead.
    (Closes: #221334).
    - 06_documentation_hevea.dpatch
  * AM_MAINTAINER_MODE added, to fix debian/rules clean interaction with files patching.
    - 07_configure_in_maintainer_mode.dpatch

ecasound2.2 (2.3.0-2) experimental; urgency=low

  * backport fix for 0.75.0 compatibility from CVS.
  - 05_audioio_jack_0.75_fix.dpatch

ecasound2.2 (2.3.0-1) experimental; urgency=low

  * New upstream release (closes: #208160)
  - ecasound2.2: Processing time (option -t) wrong with sample-rate != 44100 Hz
    From: Stephan Niemz  (closes: #195027)
  * update Build-conflicts for libkvutils and libecasound; for c102.
  * configure option "--enable-pyecasound=python" to ensure
    pure python implementation of pyecasound.
  * Run autoconf-automake-libtool in build.
  * Fix to get ecasound building:
  - ecasound/Makefile.am: "$(readline_library}" ->  "$(readline_library)"
    03_fix_unmatching_braces_in_ecasound_makefile_am
  - libtool tries to build shared libraries anyway:
    02_makefile_am_hack.dpatch: an unsuccessful attempt to not to
    try to add libasound and libjack et al into static library.
    -- the resulting output is no different ?
    rather, tried --disable-shared.
  * Update ecasound.el
    04_ecasound_el_0.8.3.dpatch
    ecasound2.2: Please update ecasound.el to 0.8.3
    From: Mario Lang  (closes: #208215)
  * Note: JACK support is temporarily broken; thus experimental

ecasound2.2 (2.2.3-6) unstable; urgency=low

  * python2.3 transition (closes: #206047)

ecasound2.2 (2.2.3-5.1) unstable; urgency=low

  * NMU
  * Build with python2.3 as the default python version.

ecasound2.2 (2.2.3-5) unstable; urgency=low

  * Add Build-Depends on tetex-bin
    Thanks to Bdale for reporting. (closes: #202048)

ecasound2.2 (2.2.3-4) unstable; urgency=low

  * fix documentation install process, and build the documentation
  - added build-dep on latex2html
  - debian/rules, debian/docs: added build process and install process.
  - doxygen documentation cannot be produced from source, sent upstream.
  - debian/rules: use sed for index.html to change .pdf link to .pdf.gz
  (closes: #200578)
  * debian/TODO: update, there is nothing notable to do anymore.

ecasound2.2 (2.2.3-3) unstable; urgency=low

  * use dpatch to manage patches
    01_ecasoundrc-location-fix: use usr/share/ecasound2.2/ecasound/ecasoundrc
  * debian/compat: use this file to specify debhelper compat version.

ecasound2.2 (2.2.3-2) unstable; urgency=low

  * change sections.
  * Build and require jack 0.71.2

ecasound2.2 (2.2.3-1) unstable; urgency=low

  * New upstream release
  - ecasoundrc.in, libecasound/eca-resources.cpp: usr/share/ecasound2.2/ecasound/ecasoundrc
  * update README.Debian

ecasound2.2 (2.2.2-1) unstable; urgency=low

  * New upstream release
  - ecasoundrc.in, libecasound/eca-resources.cpp: usr/share/ecasound2.2/ecasoundrc
  - other Debian-local patches merged upstream.

ecasound2.2 (2.2.1-2) unstable; urgency=low

  * Rebuild with libjack0.50.0

ecasound2.2 (2.2.1-1) unstable; urgency=low

  * New upstream release
  * Update config.guess/sub from autotools-dev.
  * Hack ecasoundrc.in, libecasound/eca-resources.cpp to look in
    /usr/share/ecasound2.2/ecasound
  * Forward-port pyecasound compile rules.
  * AM_MAINTAINER_MODE, aclocal, autoconf, automake
  * Build-Depend and libecasound2.2-dev depend on libsamplerate0-dev.
  * ecalength.c: int curopt, not char. (closes: #181228)

ecasound2.2 (2.2.0-rel-7) unstable; urgency=low

  * Add missing Depends on -dev packages.

ecasound2.2 (2.2.0-rel-6) unstable; urgency=low

  * Build-depend on libartsc0-dev instead of libarts-dev

ecasound2.2 (2.2.0-rel-5) unstable; urgency=low

  * ecasoundrc.in, libecasound/eca-resources.cpp: hand-fix problems with ecasoundrc path  (resource-directory is /share/ecasound2.2/ecasound)
    (closes: #179184)
  * link .lo file instead of .o file for pyecasound. (closes: #179380)
  * run aclocal/autoconf/automake
  - debian/rules chmod a+x depcomp
  * apply description improvement for ecasound-el from <email address hidden>,
    thanks!
    (closes: #178256)
  * fix libecasound-config.in to not generate -rpath when library is
    installed in standard install path.

ecasound2.2 (2.2.0-rel-4) unstable; urgency=low

  * Build-Depend on libjack0.44.0-dev (closes: #177107, #177732)
  * Do not link libecasoundc.a static link library to shared library,
    link libecasoundc_sa.lo which is compiled with -fPIC
    (closes: #177096)
  * add AM_MAINTAINER_MODE to configure.in, and relibtoolize/autoconf/automake

ecasound2.2 (2.2.0-rel-3) unstable; urgency=low

  * set datadir=/usr/share/ecasound2.2, to avoid file conflicts
    with libecasound7.
    (closes: #176880)

ecasound2.2 (2.2.0-rel-2) unstable; urgency=low

  * install changelogs for ecasound-el package.
  * update TODO file.
  * add missing Depends to emacs21,xemacs21 on ecasound-el
  * change so that ecasound-el does not byte-compile for emacs20.
    thanks "Aaron M. Ucko" <email address hidden> (closes: #176775)

ecasound2.2 (2.2.0-rel-1) unstable; urgency=low

  * New upstream release, naming it 2.2.0-rel (real version is 2.2.0)
  * Remove hacks to build with gcc-3.2 on hppa, gcc-3.2 should be default now.
  * Remove hackgcc3 option
  * Rebuild with gcc-3.2
  * Change ecasound.el default ecasound value to /usr/bin/ecasound
  * New ecasound-el package.

ecasound2.2 (2.2.0-rc1-1) unstable; urgency=low

  * new upstream release (closes: #173300)
  Does not co-install with previous versions.
  There are some known and unknown bugs in this release,
  and would be nice if people tested this version out before I completely
  replace ecasound.
  * enable largefile support.
  * do not ship documentation for now, since build system changed from
  yodl to latex, we'll fix later.
  * ecamonitor in ecasound2.2 require python-ecasound, so Depend on
    python-ecasound2.2, and also python.
  * debian/rules: chmod 644 pyeca.py
  * -dev packages provide and conflict -development, and conflict with
    lib*-dev, because old ecasound -dev packages were not with soname.

ecasound (2.0.4-7) unstable; urgency=low

  * Inadvertently uploaded a broken package.
  Fix it so that we actually have a working "ecasound" package!

ecasound (2.0.4-6) unstable; urgency=low

  * update README/Debian wrt gcc and libasound2
  * Standards-Version: 3.5.8, rewrite of some portion of build scripts:
  - support noopt compilation option, nostrip is pending.
  - DH_COMPAT=4
  - debian/control: Build-Dep on debhelper 4.1.1 or greater
  - libasound2 is Depends:, not Suggests:.
  - dh_shlibs call changed
  - debian/rules: remove unnecessary touching of Makefile.in's.
    AM_INIT_AUTOMAKE should take care of that
  - debian/shlibs.local is no longer needed, removed.
  * do not set CXXFLAGS in configure.ac
  * re-run autoconf.

ecasound (2.0.4-5) unstable; urgency=low

  * update hackgcc3 DEB_BUILD_OPTIONS to use gcc-3.2
  * debian/rules: special-case hppa to use gcc-3.2. (closes: #165582)

ecasound (2.0.4-4) unstable; urgency=low

  * configure.in: fix python dirs specification to work with python 2.2
    (closes: #159979)
  * regenerate autoconf scripts

ecasound (2.0.4-3) unstable; urgency=low

  * Fix compilation on g++-3.x and newer readline.
    char* -> const char*, and remove spurious typecast (closes: #157118)
  * configure.in: Change check for map.h to map
  * Recompile with libasound2
  * Remove spurious architecture field on Build-Depends
  * Compile with python2.2 (closes: #159711)

ecasound (2.0.4-2) unstable; urgency=low

  * apply upstream patch to add -mieee to alpha build.
  * add AM_MAINTAINER_MODE to configure.in

ecasound (2.0.4-1) unstable; urgency=low

  * new upstream release, incoorporating most of my previous modifications.
  * ecasound_faq.html seems to have disappeared, remove the reference from
    libecasound7.docs.
  * --enable-sys-readline
  * add libreadline4-dev build-depends.
  * ecasound/eca_text.cpp: completion_matches to rl_completion_matches
  * configure.in: fix pymoddirs and python_incdirs to include python2.1
    (forward port from 2.0.3-3)

ecasound (2.0.3-5) unstable; urgency=low

  * Dependency: libecasound-dev -> libkvutils-dev and libecasoundc-dev ->
    libecasound-dev (closes: #128221)

ecasound (2.0.3-4) unstable; urgency=low

  * "Package for my Christmas..."
  * Cosmetic fixes for release, for bugs described in 125972.
  * fixed debian/rules. It depended on python 1.5 or 2.0 being available.
    I want python 2.1
  * debian/control: remove reference to mpg123 from Suggest, instead,
    suggest mpg321 | mp3-decoder.
  * debian/control: add mikmod, and timidity to Suggests: list.
  * debian/control: change from suggests to ladspa-plugin to
    swh-plugins | ladspa-plugin, so that it is more obvious which to install.
  * debian/README: updated the text, and did a spell-check.
  * debian/TODO: modified the obvious typo.

ecasound (2.0.3-3) unstable; urgency=low

  * debian/control: libecasound0-dev provides and conflicts libecasound-dev.
    so that future versions can coexist (kind of). Future versions may
    wish to Conflict: with <= 2.0.3-2
  * changed to python-2.1 (closes: #118264)
  * changed configure.in to look for python2.1
  * added : touch configure.in aclocal.m4 `find -name Makefile.in ` configure
    to debian/rules, this seems to pass pdebuild test.
  * changed postinst for python-ecasound to use python instead of python2

ecasound (2.0.3-2) unstable; urgency=low

  * debian/rules, debian/control: alpha version is no longer built with g++-3.0.
  * updated shlibs.local to represent that change.

ecasound (2.0.3-1) unstable; urgency=low

  * new upstream version with some upstream bugfixes, and some Debian
    fixes merged.
    Some upstream fixes include:
    o problems with ALSA 0.9beta7 (dlopen() issue)
    o minor samplerated bug with LADSPA plugins
  * removed automake/autoconf calls from configure target ( I am no
    longer using a cvs-checkout version of ecasound, so I should not need
    to re-run those programs.) (closes: #114209)
  * debian/control: removed build-deps for autoconf, automake
  * debian/rules: removed the removing of autoconf/automake generated files from clean target.
  * fixed priorities to match overrides file

ecasound (2.0.2-4) unstable; urgency=low

  * split out libecasoundc package. adding libecasoundc0.postinst etc.
  * ALSA 0.9 support is still removed ... probably for a longer time than anticipated.
  * changed from using dh_movefiles, to using mv directly, in debian/rules.
    Hoping not to have dropped any files.
  * adding a replaces libecasound, for libecasoundc, because some files
    have moved over

ecasound (2.0.2-3) unstable; urgency=low

  * fixing shlibs.local file to depend above 2.0.2-2
  * Remove ALSA 0.9 support temporarily (hopefully) because
    apparently ALSA  in Debian is broken (again).
    Reverted to ALSA 0.5, because
    that's better than nothing, IMO.
    Changed libasound2-dev [i386 alpha ia64 powerpc m68k] to
    libasound1-dev [i386 alpha ia64 powerpc m68k]
    (closes: #111555)

ecasound (2.0.2-2) unstable; urgency=low

  * Build with gcc-3.0 on alpha.
  * Build depends on gcc-3.0 and g++-3.0 [alpha]
  * add a DEB_BUILD_OPTION for test-building for g++-3.0

ecasound (2.0.2-1) unstable; urgency=low

  * New upstream release with bugfixes.
  * gcc-3.0 patch has been integrated upstream (partially, the
   patching done for 2.0.1-6 did not make it.)
   fixed gcc-3.0 - libasound1-dev compilation errors,
   and copied newer config.{sub,guess}

ecasound (2.0.1-6) unstable; urgency=low

  * updated config.sub and config.guess.
    I hope this is what LaMont meant... (closes: #108244)
  * fixing build-deps to the latest state. Moving over to libasound2 all those arches which seem to support libasound2.
  * fixing some more gcc-3.0 incompatibility

ecasound (2.0.1-5) unstable; urgency=low

  * fix postinst to work with python2. (closes: #104509)
  * compile with python2. python2 seems to be GPL-compatible now, and it
    is better supported by external application programs.
  * python-ecasound Depends: python2-base
  * build-depends on python2-dev
  * python-ecasound postinst and preinst is updated to work with python2

ecasound (2.0.1-4) unstable; urgency=low

  * patched so that it can work with g++-3.0, please verify.

ecasound (2.0.1-3) unstable; urgency=low

  * fixed build-deps for arm. Thanks to Philip Brandell for pointing this out.
    (closes: #101984)
  * bumped up standards-version to 3.5.5 (no change)

ecasound (2.0.1-2) unstable; urgency=low

  * removed dependency for alsa 0.5 on arm which is not available
    and changed build-dependency to point to ladspa-sdk
    and changed build-dependency to libarts arch specification to be
    more specific. (closes: #100425)

ecasound (2.0.1-1) unstable; urgency=low

  * new upstream release with many bugfixes. Try this if you have experienced
    mp3 zombies, or some mysterious segfaults.
  * debian/control: build with alsa version 0.9 for ia32, and not for other arches, and use alsa 0.4 for arm.
    TODO: build a 0.5 version separately if possible.

ecasound (2.0.0-3) unstable; urgency=low

  * debian/control: corrected build-depends (closes: #96883)

ecasound (2.0.0-2) unstable; urgency=low

  * Recompiling with ladspa support

ecasound (2.0.0-1) unstable; urgency=low

  * New upstream stable version
  * debian/control: removed arts build dependency to allow for alpha build. (closes: #95710)
  * debian/rules: ALSA 0.5 in unstable is working again. Re-enabling ALSA. (#95717)

ecasound (1.9dev7.cvs20010428-1) unstable; urgency=low

  * CVS version getting ready for the version 2 release.
  * ladspa.h removed from distribution. (closes: #88750)
  * debian/control: added arts build-dependency
  * debian/rules: hack for catman pages is removed because patch was
    accepted.
  * debian/control: Build-depends on ncurses 5 (closes: #90709)
  * debian/control: Build-depends on automake/autoconf
  * debian/control: Build-conflicts on python2-base.
  * debian/rules: ALSA in debian is currently broken, as a workaround,
    --disable-alsa is passed to ./configure
  * debian/control: libecasound7 conflicts with older version of eca* software
  * debian/rules: removes Makefile.in to reduce diff size.
  * debian/README.Debian: changed the documentation to suit the reality.

ecasound (1.9dev2-2) unstable; urgency=low

  * debian/rules: dh_testversion to test version of debhelper
  * debian/control: Maintainer: field points to <email address hidden> now.
  * debian/control: policy version to 3.5.2
  * debian/rules: accepts debug options in DEB_BUILD_OPTIONS
  * debian/control: arm and mips added for Build-Depends to libasound1
    hoping that they actually are working.
  * debian/ecasoundc-config.1, debian/ecasound-config.1, debian/rules:
    removed the undocumented.7.gz symlink, and created real manpages.
  * debian/rules: removed reference to CFLAGS because it is not necessary

ecasound (1.9dev2-1) unstable; urgency=low

  * change maintainer mail address to a debian one.
  * upgrade to the latest upstream development release as to avoid forking
    and backporting fixes.
  * new versioning policy in the upstream. Hope it works.
  * the dependency is bumped up to make things look better.

ecasound (1.8.5d15-9) unstable; urgency=low

  * Add a #define __KERNEL__ in the hope that kvutils will compile for
    arches that require that in asm/atomic.h for read_atomic().

ecasound (1.8.5d15-8) unstable; urgency=low

  * change rm to rm -f so that minor discrepancies do not prohibit
    things from building. Python code gets compiled into "lib-dynload" on
    some systems, and "site-packages" on others.
  * added little more verbose description about libkvutils, closes:#83295
  * added a hack into ./configure so that python modules get installed
    into site-packages regardless of whether that directory already exists
    or not.

ecasound (1.8.5d15-7) unstable; urgency=low

  * added suggests for mpg123 into libecasound7, closes:#83183
  * added suggests for vorbis-tools (for completeness) to libecasound7.

ecasound (1.8.5d15-6) unstable; urgency=low

  * Add depends from python-ecasound to python-base because the
    install script requires compileall.py to be existant.
  * Change the section of ecasound-python to interpreters as per
    ftpadmin.
  * ecasound is in the debian archive, should have closed the ITP bug,
    and I'm doing it now, closes: #72971

ecasound (1.8.5d15-5) unstable; urgency=low

  * Modified python-ecasound postinst to work with latest python1.5
  * Modified libecasoundc/Makefile.am to add "-L" to link libecasound
  * Modified libpyecasound/ to add libecasound
  * Modified debian/control to update descriptions of packages to be
    more appropriate, esp. python-ecasound.

ecasound (1.8.5d15-4) unstable; urgency=low

  * Added suggests mp3-encoder/decoder
  * Added build-depends python-dev
  * Catman pages are now manpages.
  * Created python-ecasound package
  * fixed pyecasound/libpyecasound.la to include ecasound into depends.

ecasound (1.8.5d15-3) unstable; urgency=low

  * rebuilt.

ecasound (1.8.5d15-2) unstable; urgency=low

  * removed ecasound-plugin package and reintegrated into libecasound7
  * It should work with libecasound7 suggesting audio dependencies.

ecasound (1.8.5d15-1) unstable; urgency=low

  * Moved documentation files around so that html links work for
    users_guide, and programmers_guide. They are now in libecasound7
  * C-binding library files have been moved to libecasound{7,-dev}
  * Updated debian/shlibs.local to (>> 1.8.5d15)
  * python bindings are not quite checked yet.

ecasound (1.8.5d15-0) unstable; urgency=low

  * New upstream version. A quick-hack build.
  * (not uploaded to Debian)

ecasound (1.8.4d15-1) unstable; urgency=low

  * New upstream release
  * Moved out ecasound-plugin to be a separate package depended by the main
    package to go along with the design of rpm package version. ecasound-plugin
    can be a Suggests:.
  * Please note that configuration file .ecasoundrc has changed slightly,
    remember to delete the file from home directories, if you have had them
    installed.
  * To be uploaded to Debian (closes: Bug#72971)
  * Added support for doc-base.

ecasound (1.8.3d15-2) unstable; urgency=low

  * Changed control files to make libs files go to libs section, and dev
    files go into dev section.
  * Fixed menu files so that Debian menu entries get added.
  * (not uploaded to Debian)

ecasound (1.8.3d15-1) unstable; urgency=low

  * Initial packaging attempt, ported to the current development version
  required for ecawave
  * please note that plugins directory is moved to
  /usr/lib/libecasound7/ecasound-plugins
  * (not uploaded to Debian)

ecasound (1.8.2r14-1) unstable; urgency=low

  * Initial packaging attempt
  * (not uploaded to Debian)
 -- Alessio Treglia <email address hidden>   Mon,  11 Jul 2011 11:23:21 +0000