Crash while installing edgy eft rc on AMD64

hi there,

just tried installing the edgy eft. sadly it crashes with the following messages:

Traceback (most recent call last):
  File "/usr/bin/ubiquity", line 166, in ?
    main()
  File "/usr/bin/ubiquity", line 161, in main
    install(sys.argv[1])
  File "/usr/bin/ubiquity", line 57, in install
    ret = wizard.run()
  File "/usr/lib/ubiquity/ubiquity/frontend/gtkui.py", line 305, in run
    self.process_step()
  File "/usr/lib/ubiquity/ubiquity/frontend/gtkui.py", line 856, in process_step
    self.progress_loop()
  File "/usr/lib/ubiquity/ubiquity/frontend/gtkui.py", line 631, in progress_loop
    raise RuntimeError, ("Install failed with exit code %s; see "
RuntimeError: Install failed with exit code 137; see /var/log/syslog

i also had a terminal open in which the following appeared:

Message from syslogd@ubuntu at Fri Oct 20 14:05:44 2006 ...
ubuntu kernel: [ 485.022289] Oops: 0000 [1] SMP

Message from syslogd@ubuntu at Fri Oct 20 14:05:44 2006 ...
ubuntu kernel: [ 485.022726] CR2: 0000011800065000

/var/log/syslog states:
Oct 20 13:53:09 ubuntu syslogd 1.4.1#18ubuntu6: restart.
Oct 20 13:53:09 ubuntu kernel: Inspecting /boot/System.map-2.6.17-10-generic
Oct 20 13:53:09 ubuntu kernel: Loaded 23624 symbols from /boot/System.map-2.6.17-10-generic.
Oct 20 13:53:09 ubuntu kernel: Symbols match kernel version 2.6.17.
Oct 20 13:53:09 ubuntu kernel: No module symbols loaded - kernel modules not enabled.
Oct 20 13:53:09 ubuntu kernel: [ 0.000000] Bootdata ok (command line is BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.gz ramdisk_size=1048576 root=/dev/ram rw quiet splash --)
Oct 20 13:53:09 ubuntu kernel: [ 0.000000] Linux version 2.6.17-10-generic (root@crested) (gcc version 4.1.2 20060928 (prerelease) (Ubuntu 4.1.1-13ubuntu5)) #2 SMP Fri Oct 13 15:34:39 UTC 2006 (Ubuntu 2.6.17-10.33-generic)
Oct 20 13:53:09 ubuntu kernel: [ 0.000000] BIOS-provided physical RAM map:
Oct 20 13:53:09 ubuntu kernel: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
Oct 20 13:53:09 ubuntu kernel: [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
Oct 20 13:53:09 ubuntu kernel: [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
Oct 20 13:53:09 ubuntu kernel: [ 0.000000] BIOS-e820: 0000000000100000 - 000000007fee0000 (usable)
Oct 20 13:53:09 ubuntu kernel: [ 0.000000] BIOS-e820: 000000007fee0000 - 000000007fee3000 (ACPI NVS)
Oct 20 13:53:09 ubuntu kernel: [ 0.000000] BIOS-e820: 000000007fee3000 - 000000007fef0000 (ACPI data)
Oct 20 13:53:09 ubuntu kernel: [ 0.000000] BIOS-e820: 000000007fef0000 - 000000007ff00000 (reserved)
Oct 20 13:53:09 ubuntu kernel: [ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
Oct 20 13:53:09 ubuntu kernel: [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
Oct 20 13:53:09 ubuntu kernel: [ 0.000000] DMI 2.3 present.
Oct 20 13:53:09 ubuntu kernel: [ 0.000000] ACPI: RSDP (v000 Nvidia ) @ 0x00000000000f7820
Oct 20 13:53:09 ubuntu kernel: [ 0.000000] ACPI: RSDT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000007fee3040
Oct 20 13:53:09 ubuntu kernel: [ 0.000000] ACPI: FADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000007fee30c0
Oct 20 13:53:09 ubuntu kernel: [ 0.000000] ACPI: SSDT (v001 PTLTD POWERNOW 0x00000001 LTP 0x00000001) @ 0x000000007feec1c0
Oct 20 13:53:09 ubuntu kernel: [ 0.000000] ACPI: MCFG (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000007feec400
Oct 20 13:53:09 ubuntu kernel: [ 0.000000] ACPI: MADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000007feec100
Oct 20 13:53:09 ubuntu kernel: [ 0.000000] ACPI: DSDT (v001 NVIDIA AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x0000000000000000
Oct 20 13:53:09 ubuntu kernel: [ 0.000000] Scanning NUMA topology in Northbridge 24
Oct 20 13:53:09 ubuntu kernel: [ 0.000000] Number of nodes 1
Oct 20 13:53:09 ubuntu kernel: [ 0.000000] Node 0 MemBase 0000000000000000 Limit 000000007fee0000
Oct 20 13:53:09 ubuntu kernel: [ 0.000000] NUMA: Using 63 for the hash shift.
Oct 20 13:53:09 ubuntu kernel: [ 0.000000] Using node hash shift of 63
Oct 20 13:53:09 ubuntu kernel: [ 0.000000] Bootmem setup node 0 0000000000000000-000000007fee0000
Oct 20 13:53:09 ubuntu kernel: [ 0.000000] On node 0 totalpages: 515387
Oct 20 13:53:09 ubuntu kernel: [ 0.000000] DMA zone: 2591 pages, LIFO batch:0
Oct 20 13:53:09 ubuntu kernel: [ 0.000000] DMA32 zone: 512796 pages, LIFO batch:31
Oct 20 13:53:09 ubuntu kernel: [ 0.000000] Nvidia board detected. Ignoring ACPI timer override.
Oct 20 13:53:09 ubuntu kernel: [ 0.000000] ACPI: PM-Timer IO Port: 0x1008
Oct 20 13:53:09 ubuntu kernel: [ 0.000000] ACPI: Local APIC address 0xfee00000
Oct 20 13:53:09 ubuntu kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Oct 20 13:53:09 ubuntu kernel: [ 0.000000] Processor #0 15:11 APIC version 16
Oct 20 13:53:09 ubuntu kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Oct 20 13:53:09 ubuntu kernel: [ 0.000000] Processor #1 15:11 APIC version 16
Oct 20 13:53:09 ubuntu kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
Oct 20 13:53:09 ubuntu kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
Oct 20 13:53:09 ubuntu kernel: [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
Oct 20 13:53:09 ubuntu kernel: [ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
Oct 20 13:53:09 ubuntu kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Oct 20 13:53:09 ubuntu kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
Oct 20 13:53:09 ubuntu kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
Oct 20 13:53:09 ubuntu kernel: [ 0.000000] ACPI: IRQ9 used by override.
Oct 20 13:53:09 ubuntu kernel: [ 0.000000] ACPI: IRQ14 used by override.
Oct 20 13:53:09 ubuntu kernel: [ 0.000000] ACPI: IRQ15 used by override.
Oct 20 13:53:09 ubuntu kernel: [ 0.000000] Setting APIC routing to physical flat
Oct 20 13:53:09 ubuntu kernel: [ 0.000000] Using ACPI (MADT) for SMP configuration information
Oct 20 13:53:09 ubuntu kernel: [ 0.000000] Allocating PCI resources starting at 80000000 (gap: 7ff00000:70100000)
Oct 20 13:53:09 ubuntu kernel: [ 0.000000] Checking aperture...
Oct 20 13:53:09 ubuntu kernel: [ 0.000000] CPU 0: aperture @ 341a000000 size 32 MB
Oct 20 13:53:09 ubuntu kernel: [ 0.000000] Aperture from northbridge cpu 0 too small (32 MB)
Oct 20 13:53:09 ubuntu kernel: [ 0.000000] No AGP bridge found
Oct 20 13:53:09 ubuntu kernel: [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
Oct 20 13:53:09 ubuntu kernel: [ 0.000000] Built 1 zonelists
Oct 20 13:53:09 ubuntu kernel: [ 0.000000] Kernel command line: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.gz ramdisk_size=1048576 root=/dev/ram rw quiet splash --
Oct 20 13:53:09 ubuntu kernel: [ 0.000000] Initializing CPU#0
Oct 20 13:53:09 ubuntu kernel: [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
Oct 20 13:53:09 ubuntu kernel: [ 0.000000] Disabling vsyscall due to use of PM timer
Oct 20 13:53:09 ubuntu kernel: [ 0.000000] time.c: Using 3.579545 MHz WALL PM GTOD PM timer.
Oct 20 13:53:09 ubuntu kernel: [ 0.000000] time.c: Detected 2009.282 MHz processor.
Oct 20 13:53:09 ubuntu kernel: [ 29.607970] Console: colour VGA+ 80x25
Oct 20 13:53:09 ubuntu kernel: [ 29.608735] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Oct 20 13:53:09 ubuntu kernel: [ 29.609936] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Oct 20 13:53:09 ubuntu kernel: [ 29.625603] Memory: 2052068k/2096000k available (2129k kernel code, 43544k reserved, 1424k data, 188k init)
Oct 20 13:53:09 ubuntu kernel: [ 29.704768] Calibrating delay using timer specific routine.. 4022.52 BogoMIPS (lpj=8045053)
Oct 20 13:53:09 ubuntu kernel: [ 29.704816] Security Framework v1.0.0 initialized
Oct 20 13:53:09 ubuntu kernel: [ 29.704821] SELinux: Disabled at boot.
Oct 20 13:53:09 ubuntu kernel: [ 29.704840] Mount-cache hash table entries: 256
Oct 20 13:53:09 ubuntu kernel: [ 29.704955] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
Oct 20 13:53:09 ubuntu kernel: [ 29.704958] CPU: L2 Cache: 512K (64 bytes/line)
Oct 20 13:53:09 ubuntu kernel: [ 29.704961] CPU 0/0(2) -> Node 0 -> Core 0
Oct 20 13:53:09 ubuntu kernel: [ 29.704974] SMP alternatives: switching to UP code
Oct 20 13:53:09 ubuntu kernel: [ 29.705155] checking if image is initramfs... it is
Oct 20 13:53:09 ubuntu kernel: [ 30.214784] Freeing initrd memory: 6230k freed
Oct 20 13:53:09 ubuntu kernel: [ 30.217435] ACPI: Core revision 20060707
Oct 20 13:53:09 ubuntu kernel: [ 30.219719] ACPI: Looking for DSDT ... not found!
Oct 20 13:53:09 ubuntu kernel: [ 30.266306] Using local APIC timer interrupts.
Oct 20 13:53:09 ubuntu kernel: [ 30.316016] result 12558030
Oct 20 13:53:09 ubuntu kernel: [ 30.316018] Detected 12.558 MHz APIC timer.
Oct 20 13:53:09 ubuntu kernel: [ 30.316257] SMP alternatives: switching to SMP code
Oct 20 13:53:09 ubuntu kernel: [ 30.316338] Booting processor 1/2 APIC 0x1
Oct 20 13:53:09 ubuntu kernel: [ 30.326265] Initializing CPU#1
Oct 20 13:53:09 ubuntu kernel: [ 30.403599] Calibrating delay using timer specific routine.. 4018.79 BogoMIPS (lpj=8037589)
Oct 20 13:53:09 ubuntu kernel: [ 30.403605] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
Oct 20 13:53:09 ubuntu kernel: [ 30.403607] CPU: L2 Cache: 512K (64 bytes/line)
Oct 20 13:53:09 ubuntu kernel: [ 30.403610] CPU 1/1(2) -> Node 0 -> Core 1
Oct 20 13:53:09 ubuntu kernel: [ 30.403681] AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 02
Oct 20 13:53:09 ubuntu kernel: [ 30.407603] CPU 1: Syncing TSC to CPU 0.
Oct 20 13:53:09 ubuntu kernel: [ 30.408016] CPU 1: synchronized TSC with CPU 0 (last diff 0 cycles, maxerr 490 cycles)
Oct 20 13:53:09 ubuntu kernel: [ 30.408021] Brought up 2 CPUs
Oct 20 13:53:09 ubuntu kernel: [ 30.408067] testing NMI watchdog ... OK.
Oct 20 13:53:09 ubuntu kernel: [ 31.069688] migration_cost=174
Oct 20 13:53:09 ubuntu kernel: [ 31.069951] NET: Registered protocol family 16
Oct 20 13:53:09 ubuntu kernel: [ 31.069973] ACPI: bus type pci registered
Oct 20 13:53:09 ubuntu kernel: [ 31.073235] PCI: Using MMCONFIG at f0000000
Oct 20 13:53:09 ubuntu kernel: [ 31.073256] PCI: No mmconfig possible on device 0:18
Oct 20 13:53:09 ubuntu kernel: [ 31.082574] ACPI: Interpreter enabled
Oct 20 13:53:09 ubuntu kernel: [ 31.082577] ACPI: Using IOAPIC for interrupt routing
Oct 20 13:53:09 ubuntu kernel: [ 31.083262] ACPI: PCI Root Bridge [PCI0] (0000:00)
Oct 20 13:53:09 ubuntu kernel: [ 31.083264] PCI: Probing PCI hardware (bus 00)
Oct 20 13:53:09 ubuntu kernel: [ 31.090867] PCI: Ignoring BAR0-3 of IDE controller 0000:00:04.0
Oct 20 13:53:09 ubuntu kernel: [ 31.091140] PCI: Transparent bridge - 0000:00:06.0
Oct 20 13:53:09 ubuntu kernel: [ 31.091413] Boot video device is 0000:07:00.0
Oct 20 13:53:09 ubuntu kernel: [ 31.091479] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
Oct 20 13:53:09 ubuntu kernel: [ 31.223319] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
Oct 20 13:53:09 ubuntu kernel: [ 31.226058] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled.
Oct 20 13:53:09 ubuntu kernel: [ 31.226507] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0, disabled.
Oct 20 13:53:09 ubuntu kernel: [ 31.226965] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled.
Oct 20 13:53:09 ubuntu kernel: [ 31.227413] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled.
Oct 20 13:53:09 ubuntu kernel: [ 31.227860] ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 11 14 15) *0, disabled.
Oct 20 13:53:09 ubuntu kernel: [ 31.228313] ACPI: PCI Interrupt Link [LNK6] (IRQs 5 *7 9 10 11 14 15)
Oct 20 13:53:09 ubuntu kernel: [ 31.228763] ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 11 14 15) *0, disabled.
Oct 20 13:53:09 ubuntu kernel: [ 31.229211] ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled.
Oct 20 13:53:09 ubuntu kernel: [ 31.229659] ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled.
Oct 20 13:53:09 ubuntu kernel: [ 31.230107] ACPI: PCI Interrupt Link [LUBA] (IRQs 5 *7 9 10 11 14 15)
Oct 20 13:53:09 ubuntu kernel: [ 31.230556] ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 *10 11 14 15)
Oct 20 13:53:09 ubuntu kernel: [ 31.231015] ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 10 *11 14 15)
Oct 20 13:53:09 ubuntu kernel: [ 31.231462] ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled.
Oct 20 13:53:09 ubuntu kernel: [ 31.231912] ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 10 *11 14 15)
Oct 20 13:53:09 ubuntu kernel: [ 31.232361] ACPI: PCI Interrupt Link [LUB2] (IRQs *5 7 9 10 11 14 15)
Oct 20 13:53:09 ubuntu kernel: [ 31.232808] ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled.
Oct 20 13:53:09 ubuntu kernel: [ 31.233258] ACPI: PCI Interrupt Link [LSID] (IRQs *5 7 9 10 11 14 15)
Oct 20 13:53:09 ubuntu kernel: [ 31.233706] ACPI: PCI Interrupt Link [LFID] (IRQs 5 7 9 *10 11 14 15)
Oct 20 13:53:09 ubuntu kernel: [ 31.234158] ACPI: PCI Interrupt Link [LSA2] (IRQs 5 7 9 10 *11 14 15)
Oct 20 13:53:09 ubuntu kernel: [ 31.234702] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
Oct 20 13:53:09 ubuntu kernel: [ 31.235245] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
Oct 20 13:53:09 ubuntu kernel: [ 31.235778] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.
Oct 20 13:53:09 ubuntu kernel: [ 31.236314] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
Oct 20 13:53:09 ubuntu kernel: [ 31.236848] ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled.
Oct 20 13:53:09 ubuntu kernel: [ 31.237382] ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0, disabled.
Oct 20 13:53:09 ubuntu kernel: [ 31.237917] ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled.
Oct 20 13:53:09 ubuntu kernel: [ 31.238452] ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled.
Oct 20 13:53:09 ubuntu kernel: [ 31.239041] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0, disabled.
Oct 20 13:53:09 ubuntu kernel: [ 31.239580] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0, disabled.
Oct 20 13:53:09 ubuntu kernel: [ 31.240116] ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled.
Oct 20 13:53:09 ubuntu kernel: [ 31.240652] ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0, disabled.
Oct 20 13:53:09 ubuntu kernel: [ 31.241187] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled.
Oct 20 13:53:09 ubuntu kernel: [ 31.241722] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0, disabled.
Oct 20 13:53:09 ubuntu kernel: [ 31.242258] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled.
Oct 20 13:53:09 ubuntu kernel: [ 31.242797] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
Oct 20 13:53:09 ubuntu kernel: [ 31.243374] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0, disabled.
Oct 20 13:53:09 ubuntu kernel: [ 31.243909] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0, disabled.
Oct 20 13:53:09 ubuntu kernel: [ 31.244445] ACPI: PCI Interrupt Link [ASA2] (IRQs 20 21 22 23) *0, disabled.
Oct 20 13:53:09 ubuntu kernel: [ 31.247483] Linux Plug and Play Support v0.97 (c) Adam Belay
Oct 20 13:53:09 ubuntu kernel: [ 31.247494] pnp: PnP ACPI init
Oct 20 13:53:09 ubuntu kernel: [ 31.255979] pnp: PnP ACPI: found 11 devices
Oct 20 13:53:09 ubuntu kernel: [ 31.256021] PCI: Using ACPI for IRQ routing
Oct 20 13:53:09 ubuntu kernel: [ 31.256026] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
Oct 20 13:53:09 ubuntu kernel: [ 31.256121] PCI-DMA: Disabling IOMMU.
Oct 20 13:53:09 ubuntu kernel: [ 31.256639] pnp: 00:01: ioport range 0x1000-0x107f could not be reserved
Oct 20 13:53:09 ubuntu kernel: [ 31.256643] pnp: 00:01: ioport range 0x1080-0x10ff has been reserved
Oct 20 13:53:09 ubuntu kernel: [ 31.256646] pnp: 00:01: ioport range 0x1400-0x147f has been reserved
Oct 20 13:53:09 ubuntu kernel: [ 31.256650] pnp: 00:01: ioport range 0x1480-0x14ff could not be reserved
Oct 20 13:53:09 ubuntu kernel: [ 31.256653] pnp: 00:01: ioport range 0x1800-0x187f has been reserved
Oct 20 13:53:09 ubuntu kernel: [ 31.256656] pnp: 00:01: ioport range 0x1880-0x18ff has been reserved
Oct 20 13:53:09 ubuntu kernel: [ 31.256857] PCI: Bridge: 0000:00:06.0
Oct 20 13:53:09 ubuntu kernel: [ 31.256859] IO window: disabled.
Oct 20 13:53:09 ubuntu kernel: [ 31.256861] MEM window: disabled.
Oct 20 13:53:09 ubuntu kernel: [ 31.256863] PREFETCH window: disabled.
Oct 20 13:53:09 ubuntu kernel: [ 31.256865] PCI: Bridge: 0000:00:0a.0
Oct 20 13:53:09 ubuntu kernel: [ 31.256867] IO window: disabled.
Oct 20 13:53:09 ubuntu kernel: [ 31.256869] MEM window: disabled.
Oct 20 13:53:09 ubuntu kernel: [ 31.256871] PREFETCH window: disabled.
Oct 20 13:53:09 ubuntu kernel: [ 31.256873] PCI: Bridge: 0000:00:0b.0
Oct 20 13:53:09 ubuntu kernel: [ 31.256875] IO window: disabled.
Oct 20 13:53:09 ubuntu kernel: [ 31.256876] MEM window: disabled.
Oct 20 13:53:09 ubuntu kernel: [ 31.256878] PREFETCH window: disabled.
Oct 20 13:53:09 ubuntu kernel: [ 31.256880] PCI: Bridge: 0000:00:0c.0
Oct 20 13:53:09 ubuntu kernel: [ 31.256882] IO window: disabled.
Oct 20 13:53:09 ubuntu kernel: [ 31.256884] MEM window: disabled.
Oct 20 13:53:09 ubuntu kernel: [ 31.256886] PREFETCH window: disabled.
Oct 20 13:53:09 ubuntu kernel: [ 31.256888] PCI: Bridge: 0000:00:0d.0
Oct 20 13:53:09 ubuntu kernel: [ 31.256889] IO window: disabled.
Oct 20 13:53:09 ubuntu kernel: [ 31.256891] MEM window: disabled.
Oct 20 13:53:09 ubuntu kernel: [ 31.256893] PREFETCH window: disabled.
Oct 20 13:53:09 ubuntu kernel: [ 31.256895] PCI: Bridge: 0000:00:0e.0
Oct 20 13:53:09 ubuntu kernel: [ 31.256897] IO window: disabled.
Oct 20 13:53:09 ubuntu kernel: [ 31.256899] MEM window: disabled.
Oct 20 13:53:09 ubuntu kernel: [ 31.256900] PREFETCH window: disabled.
Oct 20 13:53:09 ubuntu kernel: [ 31.256903] PCI: Bridge: 0000:00:0f.0
Oct 20 13:53:09 ubuntu kernel: [ 31.256905] IO window: a000-afff
Oct 20 13:53:09 ubuntu kernel: [ 31.256908] MEM window: fa000000-fcffffff
Oct 20 13:53:09 ubuntu kernel: [ 31.256911] PREFETCH window: e0000000-efffffff
Oct 20 13:53:09 ubuntu kernel: [ 31.256918] PCI: Setting latency timer of device 0000:00:06.0 to 64
Oct 20 13:53:09 ubuntu kernel: [ 31.256924] PCI: Setting latency timer of device 0000:00:0a.0 to 64
Oct 20 13:53:09 ubuntu kernel: [ 31.256929] PCI: Setting latency timer of device 0000:00:0b.0 to 64
Oct 20 13:53:09 ubuntu kernel: [ 31.256934] PCI: Setting latency timer of device 0000:00:0c.0 to 64
Oct 20 13:53:09 ubuntu kernel: [ 31.256939] PCI: Setting latency timer of device 0000:00:0d.0 to 64
Oct 20 13:53:09 ubuntu kernel: [ 31.256944] PCI: Setting latency timer of device 0000:00:0e.0 to 64
Oct 20 13:53:09 ubuntu kernel: [ 31.256949] PCI: Setting latency timer of device 0000:00:0f.0 to 64
Oct 20 13:53:09 ubuntu kernel: [ 31.256990] NET: Registered protocol family 2
Oct 20 13:53:09 ubuntu kernel: [ 31.302859] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
Oct 20 13:53:09 ubuntu kernel: [ 31.303144] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
Oct 20 13:53:09 ubuntu kernel: [ 31.304872] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
Oct 20 13:53:09 ubuntu kernel: [ 31.305298] TCP: Hash tables configured (established 262144 bind 65536)
Oct 20 13:53:09 ubuntu kernel: [ 31.305301] TCP reno registered
Oct 20 13:53:09 ubuntu kernel: [ 31.305658] IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $
Oct 20 13:53:09 ubuntu kernel: [ 31.306013] audit: initializing netlink socket (disabled)
Oct 20 13:53:09 ubuntu kernel: [ 31.306022] audit(1161352333.900:1): initialized
Oct 20 13:53:09 ubuntu kernel: [ 31.306190] VFS: Disk quotas dquot_6.5.1
Oct 20 13:53:09 ubuntu kernel: [ 31.306209] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Oct 20 13:53:09 ubuntu kernel: [ 31.306249] Initializing Cryptographic API
Oct 20 13:53:09 ubuntu kernel: [ 31.306253] io scheduler noop registered
Oct 20 13:53:09 ubuntu kernel: [ 31.306261] io scheduler anticipatory registered
Oct 20 13:53:09 ubuntu kernel: [ 31.306269] io scheduler deadline registered
Oct 20 13:53:09 ubuntu kernel: [ 31.306288] io scheduler cfq registered (default)
Oct 20 13:53:09 ubuntu kernel: [ 31.306747] PCI: Setting latency timer of device 0000:00:0a.0 to 64
Oct 20 13:53:09 ubuntu kernel: [ 31.306751] pcie_portdrv_probe->Dev[0376:10de] has invalid IRQ. Check vendor BIOS
Oct 20 13:53:09 ubuntu kernel: [ 31.306766] assign_interrupt_mode Found MSI capability
Oct 20 13:53:09 ubuntu kernel: [ 31.306796] Allocate Port Service[0000:00:0a.0:pcie00]
Oct 20 13:53:09 ubuntu kernel: [ 31.306845] Allocate Port Service[0000:00:0a.0:pcie03]
Oct 20 13:53:09 ubuntu kernel: [ 31.306878] PCI: Setting latency timer of device 0000:00:0b.0 to 64
Oct 20 13:53:09 ubuntu kernel: [ 31.306880] pcie_portdrv_probe->Dev[0374:10de] has invalid IRQ. Check vendor BIOS
Oct 20 13:53:09 ubuntu kernel: [ 31.306894] assign_interrupt_mode Found MSI capability
Oct 20 13:53:09 ubuntu kernel: [ 31.306910] Allocate Port Service[0000:00:0b.0:pcie00]
Oct 20 13:53:09 ubuntu kernel: [ 31.306938] Allocate Port Service[0000:00:0b.0:pcie03]
Oct 20 13:53:09 ubuntu kernel: [ 31.306972] PCI: Setting latency timer of device 0000:00:0c.0 to 64
Oct 20 13:53:09 ubuntu kernel: [ 31.306974] pcie_portdrv_probe->Dev[0374:10de] has invalid IRQ. Check vendor BIOS
Oct 20 13:53:09 ubuntu kernel: [ 31.306988] assign_interrupt_mode Found MSI capability
Oct 20 13:53:09 ubuntu kernel: [ 31.307003] Allocate Port Service[0000:00:0c.0:pcie00]
Oct 20 13:53:09 ubuntu kernel: [ 31.307030] Allocate Port Service[0000:00:0c.0:pcie03]
Oct 20 13:53:09 ubuntu kernel: [ 31.307061] PCI: Setting latency timer of device 0000:00:0d.0 to 64
Oct 20 13:53:09 ubuntu kernel: [ 31.307064] pcie_portdrv_probe->Dev[0378:10de] has invalid IRQ. Check vendor BIOS
Oct 20 13:53:09 ubuntu kernel: [ 31.307077] assign_interrupt_mode Found MSI capability
Oct 20 13:53:09 ubuntu kernel: [ 31.307092] Allocate Port Service[0000:00:0d.0:pcie00]
Oct 20 13:53:09 ubuntu kernel: [ 31.307121] Allocate Port Service[0000:00:0d.0:pcie03]
Oct 20 13:53:09 ubuntu kernel: [ 31.307155] PCI: Setting latency timer of device 0000:00:0e.0 to 64
Oct 20 13:53:09 ubuntu kernel: [ 31.307157] pcie_portdrv_probe->Dev[0375:10de] has invalid IRQ. Check vendor BIOS
Oct 20 13:53:09 ubuntu kernel: [ 31.307170] assign_interrupt_mode Found MSI capability
Oct 20 13:53:09 ubuntu kernel: [ 31.307185] Allocate Port Service[0000:00:0e.0:pcie00]
Oct 20 13:53:09 ubuntu kernel: [ 31.307212] Allocate Port Service[0000:00:0e.0:pcie03]
Oct 20 13:53:09 ubuntu kernel: [ 31.307242] PCI: Setting latency timer of device 0000:00:0f.0 to 64
Oct 20 13:53:09 ubuntu kernel: [ 31.307245] pcie_portdrv_probe->Dev[0377:10de] has invalid IRQ. Check vendor BIOS
Oct 20 13:53:09 ubuntu kernel: [ 31.307259] assign_interrupt_mode Found MSI capability
Oct 20 13:53:09 ubuntu kernel: [ 31.307275] Allocate Port Service[0000:00:0f.0:pcie00]
Oct 20 13:53:09 ubuntu kernel: [ 31.307304] Allocate Port Service[0000:00:0f.0:pcie03]
Oct 20 13:53:09 ubuntu kernel: [ 31.327855] Real Time Clock Driver v1.12ac
Oct 20 13:53:09 ubuntu kernel: [ 31.327897] Linux agpgart interface v0.101 (c) Dave Jones
Oct 20 13:53:09 ubuntu kernel: [ 31.327900] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
Oct 20 13:53:09 ubuntu kernel: [ 31.328381] mice: PS/2 mouse device common for all mice
Oct 20 13:53:09 ubuntu kernel: [ 31.328873] RAMDISK driver initialized: 16 RAM disks of 1048576K size 1024 blocksize
Oct 20 13:53:09 ubuntu kernel: [ 31.328980] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
Oct 20 13:53:09 ubuntu kernel: [ 31.328983] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Oct 20 13:53:09 ubuntu kernel: [ 31.329122] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
Oct 20 13:53:09 ubuntu kernel: [ 31.329124] PNP: PS/2 controller doesn't have AUX irq; using default 12
Oct 20 13:53:09 ubuntu kernel: [ 31.870208] serio: i8042 AUX port at 0x60,0x64 irq 12
Oct 20 13:53:09 ubuntu kernel: [ 31.870855] serio: i8042 KBD port at 0x60,0x64 irq 1
Oct 20 13:53:09 ubuntu kernel: [ 31.872203] TCP bic registered
Oct 20 13:53:09 ubuntu kernel: [ 31.872211] NET: Registered protocol family 1
Oct 20 13:53:09 ubuntu kernel: [ 31.872216] NET: Registered protocol family 8
Oct 20 13:53:09 ubuntu kernel: [ 31.872218] NET: Registered protocol family 20
Oct 20 13:53:09 ubuntu kernel: [ 31.872303] ACPI: (supports S0 S1 S3 S4 S5)
Oct 20 13:53:09 ubuntu kernel: [ 31.872350] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
Oct 20 13:53:09 ubuntu kernel: [ 31.872372] Freeing unused kernel memory: 188k freed
Oct 20 13:53:09 ubuntu kernel: [ 31.891975] input: AT Translated Set 2 keyboard as /class/input/input0
Oct 20 13:53:09 ubuntu kernel: [ 31.939101] vga16fb: initializing
Oct 20 13:53:09 ubuntu kernel: [ 31.939106] vga16fb: mapped to 0xffff8100000a0000
Oct 20 13:53:09 ubuntu kernel: [ 32.068498] Console: switching to colour frame buffer device 80x25
Oct 20 13:53:09 ubuntu kernel: [ 32.068503] fb0: VGA16 VGA frame buffer device
Oct 20 13:53:09 ubuntu kernel: [ 33.098930] Capability LSM initialized
Oct 20 13:53:09 ubuntu kernel: [ 33.126422] ACPI: Fan [FAN] (on)
Oct 20 13:53:09 ubuntu kernel: [ 33.131135] ACPI: Thermal Zone [THRM] (40 C)
Oct 20 13:53:09 ubuntu kernel: [ 33.466233] SCSI subsystem initialized
Oct 20 13:53:09 ubuntu kernel: [ 33.469567] libata version 1.20 loaded.
Oct 20 13:53:09 ubuntu kernel: [ 33.470587] sata_nv 0000:00:05.0: version 0.8
Oct 20 13:53:09 ubuntu kernel: [ 33.471158] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23
Oct 20 13:53:09 ubuntu kernel: [ 33.471163] GSI 16 sharing vector 0xE9 and IRQ 16
Oct 20 13:53:09 ubuntu kernel: [ 33.471169] ACPI: PCI Interrupt 0000:00:05.0[A] -> Link [APSI] -> GSI 23 (level, low) -> IRQ 233
Oct 20 13:53:09 ubuntu kernel: [ 33.471311] PCI: Setting latency timer of device 0000:00:05.0 to 64
Oct 20 13:53:09 ubuntu kernel: [ 33.471386] ata1: SATA max UDMA/133 cmd 0x9F0 ctl 0xBF2 bmdma 0xDC00 irq 233
Oct 20 13:53:09 ubuntu kernel: [ 33.471407] ata2: SATA max UDMA/133 cmd 0x970 ctl 0xB72 bmdma 0xDC08 irq 233
Oct 20 13:53:09 ubuntu kernel: [ 33.675838] ata1: SATA link up 3.0 Gbps (SStatus 123)
Oct 20 13:53:09 ubuntu kernel: [ 33.839736] ata1: dev 0 cfg 49:2f00 82:746b 83:7f01 84:4023 85:7469 86:3c01 87:4023 88:40ff
Oct 20 13:53:09 ubuntu kernel: [ 33.839740] ata1: dev 0 ATA-7, max UDMA7, 586072368 sectors: LBA48
Oct 20 13:53:09 ubuntu kernel: [ 33.851854] ata1: dev 0 configured for UDMA/133
Oct 20 13:53:09 ubuntu kernel: [ 33.851856] scsi0 : sata_nv
Oct 20 13:53:09 ubuntu kernel: [ 34.059359] ata2: SATA link up 1.5 Gbps (SStatus 113)
Oct 20 13:53:09 ubuntu kernel: [ 34.395040] ata2: dev 0 cfg 49:0f00 82:0000 83:4000 84:4000 85:0000 86:0000 87:4000 88:0407
Oct 20 13:53:09 ubuntu kernel: [ 34.395043] ata2: dev 0 ATAPI, max UDMA/33
Oct 20 13:53:09 ubuntu kernel: [ 34.395045] ata2(0): applying bridge limits
Oct 20 13:53:09 ubuntu kernel: [ 34.578812] ata2: dev 0 configured for UDMA/33
Oct 20 13:53:09 ubuntu kernel: [ 34.578814] scsi1 : sata_nv
Oct 20 13:53:09 ubuntu kernel: [ 34.578901] Vendor: ATA Model: SAMSUNG HD300LJ Rev: ZT10
Oct 20 13:53:09 ubuntu kernel: [ 34.578909] Type: Direct-Access ANSI SCSI revision: 05
Oct 20 13:53:09 ubuntu kernel: [ 34.579470] Vendor: TSSTcorp Model: CD/DVDW SH-W163A Rev: TS01
Oct 20 13:53:09 ubuntu kernel: [ 34.579477] Type: CD-ROM ANSI SCSI revision: 05
Oct 20 13:53:09 ubuntu kernel: [ 34.580064] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 22
Oct 20 13:53:09 ubuntu kernel: [ 34.580069] GSI 17 sharing vector 0x32 and IRQ 17
Oct 20 13:53:09 ubuntu kernel: [ 34.580075] ACPI: PCI Interrupt 0000:00:05.1[B] -> Link [APSJ] -> GSI 22 (level, low) -> IRQ 50
Oct 20 13:53:09 ubuntu kernel: [ 34.580220] PCI: Setting latency timer of device 0000:00:05.1 to 64
Oct 20 13:53:09 ubuntu kernel: [ 34.580306] ata3: SATA max UDMA/133 cmd 0x9E0 ctl 0xBE2 bmdma 0xC800 irq 50
Oct 20 13:53:09 ubuntu kernel: [ 34.580331] ata4: SATA max UDMA/133 cmd 0x960 ctl 0xB62 bmdma 0xC808 irq 50
Oct 20 13:53:09 ubuntu kernel: [ 34.584030] SCSI device sda: 586072368 512-byte hdwr sectors (300069 MB)
Oct 20 13:53:09 ubuntu kernel: [ 34.584041] sda: Write Protect is off
Oct 20 13:53:09 ubuntu kernel: [ 34.584043] sda: Mode Sense: 00 3a 00 00
Oct 20 13:53:09 ubuntu kernel: [ 34.584054] SCSI device sda: drive cache: write back
Oct 20 13:53:09 ubuntu kernel: [ 34.584091] SCSI device sda: 586072368 512-byte hdwr sectors (300069 MB)
Oct 20 13:53:09 ubuntu kernel: [ 34.584098] sda: Write Protect is off
Oct 20 13:53:09 ubuntu kernel: [ 34.584100] sda: Mode Sense: 00 3a 00 00
Oct 20 13:53:09 ubuntu kernel: [ 34.584111] SCSI device sda: drive cache: write back
Oct 20 13:53:09 ubuntu kernel: [ 34.584115] sda: sda1 sda2 < sda5 > sda4
Oct 20 13:53:09 ubuntu kernel: [ 34.610822] sd 0:0:0:0: Attached scsi disk sda
Oct 20 13:53:09 ubuntu kernel: [ 34.618302] sr0: scsi3-mmc drive: 32x/40x writer cd/rw xa/form2 cdda tray
Oct 20 13:53:09 ubuntu kernel: [ 34.618306] Uniform CD-ROM driver Revision: 3.20
Oct 20 13:53:09 ubuntu kernel: [ 34.618351] sr 1:0:0:0: Attached scsi CD-ROM sr0
Oct 20 13:53:09 ubuntu kernel: [ 34.786457] ata3: SATA link down (SStatus 0)
Oct 20 13:53:09 ubuntu kernel: [ 34.786462] scsi2 : sata_nv
Oct 20 13:53:09 ubuntu kernel: [ 34.990197] ata4: SATA link down (SStatus 0)
Oct 20 13:53:09 ubuntu kernel: [ 34.990200] scsi3 : sata_nv
Oct 20 13:53:09 ubuntu kernel: [ 34.990805] ACPI: PCI Interrupt Link [ASA2] enabled at IRQ 21
Oct 20 13:53:09 ubuntu kernel: [ 34.990810] GSI 18 sharing vector 0x3A and IRQ 18
Oct 20 13:53:09 ubuntu kernel: [ 34.990816] ACPI: PCI Interrupt 0000:00:05.2[C] -> Link [ASA2] -> GSI 21 (level, low) -> IRQ 58
Oct 20 13:53:09 ubuntu kernel: [ 34.990959] PCI: Setting latency timer of device 0000:00:05.2 to 64
Oct 20 13:53:09 ubuntu kernel: [ 34.991014] ata5: SATA max UDMA/133 cmd 0xC400 ctl 0xC002 bmdma 0xB400 irq 58
Oct 20 13:53:09 ubuntu kernel: [ 34.991035] ata6: SATA max UDMA/133 cmd 0xBC00 ctl 0xB802 bmdma 0xB408 irq 58
Oct 20 13:53:09 ubuntu kernel: [ 35.197936] ata5: SATA link down (SStatus 0)
Oct 20 13:53:09 ubuntu kernel: [ 35.197938] scsi4 : sata_nv
Oct 20 13:53:09 ubuntu kernel: [ 35.401681] ata6: SATA link down (SStatus 0)
Oct 20 13:53:09 ubuntu kernel: [ 35.401683] scsi5 : sata_nv
Oct 20 13:53:09 ubuntu kernel: [ 35.402502] NFORCE-MCP55: IDE controller at PCI slot 0000:00:04.0
Oct 20 13:53:09 ubuntu kernel: [ 35.402516] NFORCE-MCP55: chipset revision 161
Oct 20 13:53:09 ubuntu kernel: [ 35.402518] NFORCE-MCP55: not 100%% native mode: will probe irqs later
Oct 20 13:53:09 ubuntu kernel: [ 35.402522] NFORCE-MCP55: 0000:00:04.0 (rev a1) UDMA133 controller
Oct 20 13:53:09 ubuntu kernel: [ 35.402528] ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
Oct 20 13:53:09 ubuntu kernel: [ 35.402536] Probing IDE interface ide0...
Oct 20 13:53:09 ubuntu kernel: [ 36.160852] Probing IDE interface ide0...
Oct 20 13:53:09 ubuntu kernel: [ 36.186610] usbcore: registered new driver usbfs
Oct 20 13:53:09 ubuntu kernel: [ 36.186630] usbcore: registered new driver hub
Oct 20 13:53:09 ubuntu kernel: [ 36.188218] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 20
Oct 20 13:53:09 ubuntu kernel: [ 36.188224] GSI 19 sharing vector 0x42 and IRQ 19
Oct 20 13:53:09 ubuntu kernel: [ 36.188230] ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCL] -> GSI 20 (level, low) -> IRQ 66
Oct 20 13:53:09 ubuntu kernel: [ 36.188364] PCI: Setting latency timer of device 0000:00:02.1 to 64
Oct 20 13:53:09 ubuntu kernel: [ 36.188369] ehci_hcd 0000:00:02.1: EHCI Host Controller
Oct 20 13:53:09 ubuntu kernel: [ 36.188478] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
Oct 20 13:53:09 ubuntu kernel: [ 36.188504] ehci_hcd 0000:00:02.1: debug port 1
Oct 20 13:53:09 ubuntu kernel: [ 36.188508] PCI: cache line size of 64 is not supported by device 0000:00:02.1
Oct 20 13:53:09 ubuntu kernel: [ 36.188518] ehci_hcd 0000:00:02.1: irq 66, io mem 0xfe02e000
Oct 20 13:53:09 ubuntu kernel: [ 36.188525] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
Oct 20 13:53:09 ubuntu kernel: [ 37.394342] usb usb1: configuration #1 chosen from 1 choice
Oct 20 13:53:09 ubuntu kernel: [ 37.394361] hub 1-0:1.0: USB hub found
Oct 20 13:53:09 ubuntu kernel: [ 37.394367] hub 1-0:1.0: 10 ports detected
Oct 20 13:53:09 ubuntu kernel: [ 37.394682] forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.54.
Oct 20 13:53:09 ubuntu kernel: [ 37.408798] ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
Oct 20 13:53:09 ubuntu kernel: [ 37.499722] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23
Oct 20 13:53:09 ubuntu kernel: [ 37.499727] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 23 (level, low) -> IRQ 233
Oct 20 13:53:09 ubuntu kernel: [ 37.499868] PCI: Setting latency timer of device 0000:00:02.0 to 64
Oct 20 13:53:09 ubuntu kernel: [ 37.499874] ohci_hcd 0000:00:02.0: OHCI Host Controller
Oct 20 13:53:09 ubuntu kernel: [ 37.499923] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
Oct 20 13:53:09 ubuntu kernel: [ 37.519061] ohci_hcd 0000:00:02.0: irq 233, io mem 0xfe02f000
Oct 20 13:53:09 ubuntu kernel: [ 37.577039] usb usb2: configuration #1 chosen from 1 choice
Oct 20 13:53:09 ubuntu kernel: [ 37.577058] hub 2-0:1.0: USB hub found
Oct 20 13:53:09 ubuntu kernel: [ 37.577066] hub 2-0:1.0: 10 ports detected
Oct 20 13:53:09 ubuntu kernel: [ 37.683569] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 22
Oct 20 13:53:09 ubuntu kernel: [ 37.683573] ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [APCH] -> GSI 22 (level, low) -> IRQ 50
Oct 20 13:53:09 ubuntu kernel: [ 37.683578] PCI: Setting latency timer of device 0000:00:08.0 to 64
Oct 20 13:53:09 ubuntu kernel: [ 37.683586] forcedeth: using HIGHDMA
Oct 20 13:53:09 ubuntu kernel: [ 37.906558] Probing IDE interface ide1...
Oct 20 13:53:09 ubuntu kernel: [ 37.986456] usb 2-3: new low speed USB device using ohci_hcd and address 2
Oct 20 13:53:09 ubuntu kernel: [ 38.206396] eth0: forcedeth.c: subsystem: 01043:8239 bound to 0000:00:08.0
Oct 20 13:53:09 ubuntu kernel: [ 38.210220] usb 2-3: configuration #1 chosen from 1 choice
Oct 20 13:53:09 ubuntu kernel: [ 38.219098] usbcore: registered new driver hiddev
Oct 20 13:53:09 ubuntu kernel: [ 38.229199] input: Logitech USB Receiver as /class/input/input1
Oct 20 13:53:09 ubuntu kernel: [ 38.229215] input: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:02.0-3
Oct 20 13:53:09 ubuntu kernel: [ 38.229223] usbcore: registered new driver usbhid
Oct 20 13:53:09 ubuntu kernel: [ 38.229225] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
Oct 20 13:53:09 ubuntu kernel: [ 39.283883] ISO 9660 Extensions: Microsoft Joliet Level 3
Oct 20 13:53:09 ubuntu kernel: [ 39.327188] ISO 9660 Extensions: RRIP_1991A
Oct 20 13:53:09 ubuntu kernel: [ 39.354652] Registering unionfs 1.1.4
Oct 20 13:53:09 ubuntu kernel: [ 39.362737] loop: loaded (max 8 devices)
Oct 20 13:53:09 ubuntu kernel: [ 39.440565] squashfs: version 3.0 (2006/03/15) Phillip Lougher
Oct 20 13:53:09 ubuntu kernel: [ 76.502839] input: PC Speaker as /class/input/input2
Oct 20 13:53:09 ubuntu kernel: [ 76.545718] Floppy drive(s): fd0 is 1.44M
Oct 20 13:53:09 ubuntu kernel: [ 76.579659] FDC 0 is a post-1991 82077
Oct 20 13:53:09 ubuntu kernel: [ 76.623689] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Oct 20 13:53:09 ubuntu kernel: [ 76.833732] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Oct 20 13:53:09 ubuntu kernel: [ 77.432033] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 21
Oct 20 13:53:09 ubuntu kernel: [ 77.432038] ACPI: PCI Interrupt 0000:00:06.1[B] -> Link [AAZA] -> GSI 21 (level, low) -> IRQ 58
Oct 20 13:53:09 ubuntu kernel: [ 77.432173] PCI: Setting latency timer of device 0000:00:06.1 to 64
Oct 20 13:53:09 ubuntu kernel: [ 77.672811] ts: Compaq touchscreen protocol output
Oct 20 13:53:09 ubuntu kernel: [ 77.750454] sd 0:0:0:0: Attached scsi generic sg0 type 0
Oct 20 13:53:09 ubuntu kernel: [ 77.750487] sr 1:0:0:0: Attached scsi generic sg1 type 5
Oct 20 13:53:09 ubuntu kernel: [ 78.000241] hda_codec: Unknown model for AD1988, trying auto-probe from BIOS...
Oct 20 13:53:09 ubuntu kernel: [ 78.849515] NET: Registered protocol family 17
Oct 20 13:53:09 ubuntu kernel: [ 85.415271] NET: Registered protocol family 10
Oct 20 13:53:09 ubuntu kernel: [ 85.415367] lo: Disabled Privacy Extensions
Oct 20 13:53:09 ubuntu kernel: [ 85.415729] IPv6 over IPv4 tunneling driver
Oct 20 13:53:09 ubuntu kernel: [ 86.487166] ACPI: Power Button (FF) [PWRF]
Oct 20 13:53:09 ubuntu kernel: [ 86.487174] ACPI: Power Button (CM) [PWRB]
Oct 20 13:53:09 ubuntu kernel: [ 86.662791] ibm_acpi: ec object not found
Oct 20 13:53:09 ubuntu kernel: [ 86.698136] pcc_acpi: loading...
Oct 20 13:53:09 ubuntu kernel: [ 87.512655] powernow-k8: Found 2 AMD Athlon 64 / Opteron processors (version 1.60.2)
Oct 20 13:53:09 ubuntu kernel: [ 87.512685] powernow-k8: 0 : fid 0xc (2000 MHz), vid 0xa (1300 mV)
Oct 20 13:53:09 ubuntu kernel: [ 87.512690] powernow-k8: 1 : fid 0xa (1800 MHz), vid 0xc (1250 mV)
Oct 20 13:53:09 ubuntu kernel: [ 87.512693] powernow-k8: 2 : fid 0x2 (1000 MHz), vid 0x12 (1100 mV)
Oct 20 13:53:09 ubuntu kernel: [ 87.512697] cpu_init done, current fid 0xc, vid 0xa
Oct 20 13:53:13 ubuntu kernel: [ 91.411142] lp: driver loaded but no devices found
Oct 20 13:53:13 ubuntu kernel: [ 91.568093] ppdev: user-space parallel port driver
Oct 20 13:53:17 ubuntu hpiod: 1.6.9 accepting connections at 2208...
Oct 20 13:53:17 ubuntu kernel: [ 95.885859] eth0: no IPv6 routers present
Oct 20 13:53:18 ubuntu gconfd (ubuntu-3429): GConf server is not in use, shutting down.
Oct 20 13:53:18 ubuntu gconfd (ubuntu-3429): Error releasing lockfile: Failed to link '/tmp/gconfd-ubuntu/lock/1t1161352398ut660424u999p3429r2101731146k429388104' to '/tmp/gconfd-ubuntu/lock/ior': No such file or directory
Oct 20 13:53:18 ubuntu gconfd (ubuntu-3429): Exiting
Oct 20 13:53:25 ubuntu gconfd (ubuntu-6088): starting (version 2.16.0), pid 6088 user 'ubuntu'
Oct 20 13:53:25 ubuntu gconfd (ubuntu-6088): Resolved address "xml:readonly:/etc/gconf/gconf.xml.mandatory" to a read-only configuration source at position 0
Oct 20 13:53:25 ubuntu gconfd (ubuntu-6088): Resolved address "xml:readwrite:/home/ubuntu/.gconf" to a writable configuration source at position 1
Oct 20 13:53:25 ubuntu gconfd (ubuntu-6088): Resolved address "xml:readonly:/etc/gconf/gconf.xml.defaults" to a read-only configuration source at position 2
Oct 20 13:53:25 ubuntu gconfd (ubuntu-6088): Resolved address "xml:readonly:/var/lib/gconf/debian.defaults" to a read-only configuration source at position 3
Oct 20 13:53:25 ubuntu gconfd (ubuntu-6088): Resolved address "xml:readonly:/var/lib/gconf/defaults" to a read-only configuration source at position 4
Oct 20 13:53:32 ubuntu hcid[6198]: Bluetooth HCI daemon
Oct 20 13:53:32 ubuntu kernel: [ 110.540522] Bluetooth: Core ver 2.8
Oct 20 13:53:32 ubuntu kernel: [ 110.540527] NET: Registered protocol family 31
Oct 20 13:53:32 ubuntu kernel: [ 110.540530] Bluetooth: HCI device and connection manager initialized
Oct 20 13:53:32 ubuntu kernel: [ 110.540545] Bluetooth: HCI socket layer initialized
Oct 20 13:53:32 ubuntu hcid[6198]: Register path:/org/bluez fallback:1
Oct 20 13:53:32 ubuntu kernel: [ 110.565146] Bluetooth: L2CAP ver 2.8
Oct 20 13:53:32 ubuntu kernel: [ 110.565151] Bluetooth: L2CAP socket layer initialized
Oct 20 13:53:32 ubuntu sdpd[6202]: Bluetooth SDP daemon
Oct 20 13:53:32 ubuntu kernel: [ 110.816017] Bluetooth: RFCOMM socket layer initialized
Oct 20 13:53:32 ubuntu kernel: [ 110.816033] Bluetooth: RFCOMM TTY layer initialized
Oct 20 13:53:32 ubuntu kernel: [ 110.816036] Bluetooth: RFCOMM ver 1.7
Oct 20 13:53:33 ubuntu /usr/sbin/cron[6252]: (CRON) INFO (pidfile fd = 3)
Oct 20 13:53:33 ubuntu /usr/sbin/cron[6253]: (CRON) STARTUP (fork ok)
Oct 20 13:53:33 ubuntu /usr/sbin/cron[6253]: (CRON) INFO (Running @reboot jobs)
Oct 20 13:53:54 ubuntu gconfd (ubuntu-6088): Resolved address "xml:readwrite:/home/ubuntu/.gconf" to a writable configuration source at position 0
Oct 20 13:54:40 ubuntu kernel: [ 145.135516] SCSI device sda: 586072368 512-byte hdwr sectors (300069 MB)
Oct 20 13:54:40 ubuntu kernel: [ 145.136405] sda: Write Protect is off
Oct 20 13:54:40 ubuntu kernel: [ 145.136409] sda: Mode Sense: 00 3a 00 00
Oct 20 13:54:40 ubuntu kernel: [ 145.137611] SCSI device sda: drive cache: write back
Oct 20 13:54:40 ubuntu kernel: [ 145.137622] sda: sda4
Oct 20 13:54:42 ubuntu kernel: [ 146.139687] SCSI device sda: 586072368 512-byte hdwr sectors (300069 MB)
Oct 20 13:54:42 ubuntu kernel: [ 146.140088] sda: Write Protect is off
Oct 20 13:54:42 ubuntu kernel: [ 146.140093] sda: Mode Sense: 00 3a 00 00
Oct 20 13:54:42 ubuntu kernel: [ 146.140720] SCSI device sda: drive cache: write back
Oct 20 13:54:42 ubuntu kernel: [ 146.140727] sda: sda4
Oct 20 13:56:26 ubuntu ubiquity[6607]: Ubiquity 1.2.4
Oct 20 13:56:30 ubuntu ubiquity[6607]: log-output -t ubiquity laptop-detect
Oct 20 13:56:34 ubuntu ubiquity[6607]: switched to page stepLanguage
Oct 20 13:56:35 ubuntu ubiquity[6607]: ubiquity: Starting up '['log-output', '-t', 'ubiquity', '--pass-stdout', '/usr/lib/ubiquity/localechooser/localechooser']' for ubiquity.components.language.Language
Oct 20 13:56:35 ubuntu ubiquity[6607]: ubiquity: Watching for question patterns ^languagechooser/language-name, ^countrychooser/shortlist$
Oct 20 13:56:37 ubuntu localechooser: info: LANGNAME=English
Oct 20 13:56:37 ubuntu localechooser: info: line=English;0;en;US;en_US.UTF-8;UTF-8;;kbd=lat0-sun16(utf8)
Oct 20 13:56:37 ubuntu localechooser: info: Set debian-installer/language = 'en'
Oct 20 13:56:37 ubuntu localechooser: info: Set debian-installer/locale = 'en_US.UTF-8'
Oct 20 13:56:37 ubuntu localechooser: info: Set debian-installer/fallbacklocale = 'en_US.UTF-8'
Oct 20 13:56:37 ubuntu localechooser: info: Set debian-installer/country = 'US'
Oct 20 13:56:37 ubuntu localechooser: info: Set debian-installer/consoledisplay = 'kbd=lat0-sun16(utf8)'
Oct 20 13:56:37 ubuntu localechooser: info: Set debconf/language = 'en'
Oct 20 13:56:37 ubuntu localechooser: info: Set countrychooser/country-name = 'United States'
Oct 20 13:56:37 ubuntu localechooser: info: Set debian-installer/country = 'US'
Oct 20 13:56:37 ubuntu localechooser: info: Set debian-installer/locale = 'en_US.UTF-8'
Oct 20 13:56:37 ubuntu ubiquity[6607]: debconffilter_done: Language (current: Language)
Oct 20 13:56:37 ubuntu ubiquity[6607]: Step_before = stepLanguage
Oct 20 13:56:38 ubuntu ubiquity[6607]: switched to page stepLocation
Oct 20 13:56:38 ubuntu ubiquity[6607]: Step_after = stepLocation
Oct 20 13:56:39 ubuntu ubiquity[6607]: ubiquity: Starting up '['log-output', '-t', 'ubiquity', '--pass-stdout', '/usr/share/ubiquity/tzsetup']' for ubiquity.components.timezone.Timezone
Oct 20 13:56:39 ubuntu ubiquity[6607]: ubiquity: Watching for question patterns ^time/zone$
Oct 20 13:56:45 ubuntu ubiquity[6607]: debconffilter_done: Timezone (current: Timezone)
Oct 20 13:56:45 ubuntu ubiquity[6607]: Step_before = stepLocation
Oct 20 13:56:45 ubuntu ubiquity[6607]: switched to page stepKeyboardConf
Oct 20 13:56:45 ubuntu ubiquity[6607]: Step_after = stepKeyboardConf
Oct 20 13:56:46 ubuntu ubiquity[6607]: ubiquity: Starting up '['log-output', '-t', 'ubiquity', '--pass-stdout', '/usr/lib/ubiquity/console-setup/console-setup.postinst', 'configure']' for ubiquity.components.console_setup.ConsoleSetup
Oct 20 13:56:46 ubuntu ubiquity[6607]: ubiquity: Watching for question patterns ^console-setup/layout, ^console-setup/variant
Oct 20 13:56:46 ubuntu ubiquity[6607]: ubiquity: Setting keyboard layout: pc105 us []
Oct 20 13:56:46 ubuntu ubiquity[6607]: log-output -t ubiquity setxkbmap -model pc105 -layout us
Oct 20 13:56:55 ubuntu ubiquity: Your console configuration will be updated the next time your system boots.
Oct 20 13:56:55 ubuntu ubiquity: If you want to update it now, run 'setupcon' from a virtual console.
Oct 20 13:56:56 ubuntu ubiquity[6607]: log-output -t ubiquity setxkbmap -model pc105 -layout us -option lv3:ralt_switch
Oct 20 13:56:56 ubuntu ubiquity[6607]: debconffilter_done: ConsoleSetup (current: ConsoleSetup)
Oct 20 13:56:56 ubuntu ubiquity[6607]: Step_before = stepKeyboardConf
Oct 20 13:56:56 ubuntu ubiquity[6607]: switched to page stepUserInfo
Oct 20 13:56:56 ubuntu ubiquity[6607]: Step_after = stepUserInfo
Oct 20 13:56:56 ubuntu ubiquity[6607]: ubiquity: Starting up '['log-output', '-t', 'ubiquity', '--pass-stdout', '/usr/lib/ubiquity/user-setup/user-setup-ask', '/target']' for ubiquity.components.usersetup.UserSetup
Oct 20 13:56:56 ubuntu ubiquity[6607]: ubiquity: Watching for question patterns ^passwd/user-fullname$, ^passwd/username$, ^passwd/user-password$, ^passwd/user-password-again$, ERROR
Oct 20 13:57:10 ubuntu ubiquity[6607]: debconffilter_done: UserSetup (current: UserSetup)
Oct 20 13:57:10 ubuntu ubiquity[6607]: Step_before = stepUserInfo
Oct 20 13:57:10 ubuntu ubiquity[6607]: switched to page stepPartDisk
Oct 20 13:57:10 ubuntu ubiquity[6607]: Step_after = stepPartDisk
Oct 20 13:57:11 ubuntu ubiquity[6607]: ubiquity: Starting up '['log-output', '-t', 'ubiquity', '--pass-stdout', '/bin/partman']' for ubiquity.components.partman_auto.PartmanAuto
Oct 20 13:57:11 ubuntu ubiquity[6607]: ubiquity: Watching for question patterns ^partman-auto/select_disk$, ^partman-auto/.*automatically_partition$, ^partman-partitioning/new_size$, ^partman/choose_partition$, ^partman/confirm.*, type:boolean, ERROR, PROGRESS
Oct 20 13:57:11 ubuntu ubiquity: unsupported
Oct 20 13:57:11 ubuntu ubiquity: kernelmodules_basicfilesystems
Oct 20 13:57:11 ubuntu kernel: [ 223.438860] NTFS driver 2.1.27 [Flags: R/O MODULE].
Oct 20 13:57:11 ubuntu ubiquity: kernelmodules_ext3
Oct 20 13:57:12 ubuntu ubiquity: kernelmodules_jfs
Oct 20 13:57:12 ubuntu kernel: [ 223.529127] JFS: nTxBlock = 8192, nTxLock = 65536
Oct 20 13:57:12 ubuntu ubiquity: kernelmodules_reiserfs
Oct 20 13:57:12 ubuntu ubiquity: kernelmodules_xfs
Oct 20 13:57:12 ubuntu kernel: [ 223.650507] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
Oct 20 13:57:12 ubuntu kernel: [ 223.651290] SGI XFS Quota Management subsystem
Oct 20 13:57:12 ubuntu ubiquity: umount_target
Oct 20 13:57:12 ubuntu ubiquity: parted
Oct 20 13:57:25 ubuntu kernel: [ 230.025332] end_request: I/O error, dev fd0, sector 0
Oct 20 13:57:37 ubuntu kernel: [ 236.108092] end_request: I/O error, dev fd0, sector 0
Oct 20 13:57:37 ubuntu kernel: [ 236.141957] program parted_devices is using a deprecated SCSI ioctl, please convert it to SG_IO
Oct 20 13:57:37 ubuntu ubiquity: dump
Oct 20 13:57:37 ubuntu ubiquity: update_partitions
Oct 20 13:57:37 ubuntu ubiquity: filesystems_detected
Oct 20 13:57:37 ubuntu ubiquity: auto_mountpoints
Oct 20 13:57:39 ubuntu ubiquity: autouse_swap
Oct 20 13:57:39 ubuntu ubiquity: backup
Oct 20 13:57:39 ubuntu ubiquity[6607]: switched to page stepPartAuto
Oct 20 13:57:44 ubuntu ubiquity[6607]: debconffilter_done: PartmanAuto (current: PartmanAuto)
Oct 20 13:57:44 ubuntu ubiquity[6607]: Step_before = stepPartAuto
Oct 20 13:57:44 ubuntu ubiquity[6607]: switched to page stepReady
Oct 20 13:57:44 ubuntu ubiquity[6607]: Step_after = stepReady
Oct 20 13:57:45 ubuntu ubiquity[6607]: ubiquity: Starting up '['log-output', '-t', 'ubiquity', '--pass-stdout', '/usr/share/ubiquity/summary']' for ubiquity.components.summary.Summary
Oct 20 13:57:45 ubuntu ubiquity[6607]: ubiquity: Watching for question patterns ^partman/confirm.*, type:boolean, ERROR, PROGRESS, ^ubiquity/summary.*
Oct 20 13:57:45 ubuntu ubiquity[6607]: debconffilter_done: Summary (current: Summary)
Oct 20 13:58:02 ubuntu ubiquity[6607]: Step_before = stepReady
Oct 20 13:58:02 ubuntu ubiquity[6607]: progress_loop()
Oct 20 13:58:02 ubuntu gconfd (root-7816): starting (version 2.16.0), pid 7816 user 'root'
Oct 20 13:58:03 ubuntu gconfd (root-7816): Resolved address "xml:readonly:/etc/gconf/gconf.xml.mandatory" to a read-only configuration source at position 0
Oct 20 13:58:03 ubuntu gconfd (root-7816): Resolved address "xml:readwrite:/root/.gconf" to a writable configuration source at position 1
Oct 20 13:58:03 ubuntu gconfd (root-7816): Resolved address "xml:readonly:/etc/gconf/gconf.xml.defaults" to a read-only configuration source at position 2
Oct 20 13:58:03 ubuntu gconfd (root-7816): Resolved address "xml:readonly:/var/lib/gconf/debian.defaults" to a read-only configuration source at position 3
Oct 20 13:58:03 ubuntu gconfd (root-7816): Resolved address "xml:readonly:/var/lib/gconf/defaults" to