error on installation of isdnutils

I'm unable to reproduce this in current hardy

Anyone still experiencing this on Gutsy?

We are closing this bug report because it lacks the information we need to investigate the problem, as described in the previous comments. Please reopen it if you can give us the missing information, and don't hesitate to submit bug reports in the future. To reopen the bug report you can click on the current status, under the Status column, and change the Status back to "New". Thanks again!

Hi Kailang,

Stanley Hsiao and I have again confirmed the bug of sound coming from
speaker even though the "Speaker Playback Switch" is muted, and the
amp-out on 0x14 is 0x80 (muted). In addition "Speaker Playback Volume"
was also set to the minimum value (see the amp-out on node 0x02) so that
should *also* have prevented the speaker from having output.

Note that this bug is only present after applying your patch to enable
UAJ on the codec.

The attached alsa-info is taken while sound was playing back through the
speaker even when it was supposed to be muted. I hope it can be of
assistance to you. Thanks!

--
David Henningsson, Canonical Ltd.
https://launchpad.net/~diwic

OK, Thanks.

I will check with our SD.

> -----Original Message-----
> From: David Henningsson [mailto:<email address hidden>]
> Sent: Friday, February 19, 2016 6:39 PM
> To: Stanley Hsiao; TienFu Chen; Kent Lin; Kailang
> Cc: <email address hidden>
> Subject: Bug 1353355
>
> Hi Kailang,
>
> Stanley Hsiao and I have again confirmed the bug of sound
> coming from speaker even though the "Speaker Playback Switch"
> is muted, and the amp-out on 0x14 is 0x80 (muted). In
> addition "Speaker Playback Volume"
> was also set to the minimum value (see the amp-out on node
> 0x02) so that should *also* have prevented the speaker from
> having output.
>
> Note that this bug is only present after applying your patch
> to enable UAJ on the codec.
>
> The attached alsa-info is taken while sound was playing back
> through the speaker even when it was supposed to be muted. I
> hope it can be of assistance to you. Thanks!
>
> --
> David Henningsson, Canonical Ltd.
> https://launchpad.net/~diwic
>
> ------Please consider the environment before printing this e-mail.
>

Hi, kailang

By the way,

The bug id should be 1535533
<https://bugs.launchpad.net/somerville/+bug/1535533>
external microphone can't be detected

Best.
Stanley.

On Mon, Feb 22, 2016 at 3:20 PM, Kailang <email address hidden> wrote:

> OK, Thanks.
>
> I will check with our SD.
>
> > -----Original Message-----
> > From: David Henningsson [mailto:<email address hidden>]
> > Sent: Friday, February 19, 2016 6:39 PM
> > To: Stanley Hsiao; TienFu Chen; Kent Lin; Kailang
> > Cc: <email address hidden>
> > Subject: Bug 1353355
> >
> > Hi Kailang,
> >
> > Stanley Hsiao and I have again confirmed the bug of sound
> > coming from speaker even though the "Speaker Playback Switch"
> > is muted, and the amp-out on 0x14 is 0x80 (muted). In
> > addition "Speaker Playback Volume"
> > was also set to the minimum value (see the amp-out on node
> > 0x02) so that should *also* have prevented the speaker from
> > having output.
> >
> > Note that this bug is only present after applying your patch
> > to enable UAJ on the codec.
> >
> > The attached alsa-info is taken while sound was playing back
> > through the speaker even when it was supposed to be muted. I
> > hope it can be of assistance to you. Thanks!
> >
> > --
> > David Henningsson, Canonical Ltd.
> > https://launchpad.net/~diwic
> >
> > ------Please consider the environment before printing this e-mail.
> >

--
Chen-Han (Stanley) Hsiao 蕭辰翰
Software Engineer / Mainstream OEM / Professional Engineering Services
<email address hidden>
https://launchpad.net/~swem

Canonical Ltd.
Room D, 46F, No. 7, Xin Yi Rd., Sec.5, Taipei 101, 11049 Taiwan
11049 台北市信義區信義路 5 段 7 號 46 樓 D 室
Phone: 886-2-8729-6856