[Feature] GLK:New device IDs

In 4.10 kernel:
eMMC, SDIO, SD 2d1956d mmc: sdhci-pci: Add support for Intel GLK
dwc3:9d887e444fa59198e6c5b54d253e8f63fe08a808

https://git.kernel.org/cgit/linux/kernel/git/balbi/usb.git/commit/?id=9d887e444fa59198e6c5b54d253e8f63fe08a808

commit f80e78aa11ad ("mfd: intel-lpss: Add Intel Gemini Lake PCI IDs")

USB device/xDCI: 0x31aa v4.10 8f8983a5683623b62b339d159573f95a1fce44f3

PWM: 0x31c8 v4.11-rc1 ae2520540cb0090eb8cdba559bcb6a82266f0308

SMBus: 0x31d4 v4.11-rc1 9827f9eb79c56424eac6409197a290601cf78eee

I2C: 0x31ac 0x31ae 0x31b0 0x31b2 0x31b4 0x31b6 0x31b8 0x31ba v4.11-rc1 f80e78aa11ad

HS-UART: 0x31bc 0x31be 0x31c0 0x31ee v4.11-rc1 f80e78aa11ad

SPI: 0x31c2 0x31c4 0x31c6 v4.11-rc1 f80e78aa11ad, e18a80acd136

GPIO: INT3453 v4.11-rc1 6693f9f96a0936488dd7876b8079933786e27b1b

SD Card: 0x31ca v4.10 2d1956d0a4e0fd586e1c72c642929e15b5f23226

eMMC: 0x31cc v4.10 2d1956d0a4e0fd586e1c72c642929e15b5f23226

SDIO: 0x31d0 v4.10 2d1956d0a4e0fd586e1c72c642929e15b5f23226

NPK: 0x318e v4.11-rc4 340837f985

This bug was fixed in the package linux - 4.10.0-15.17

---------------
linux (4.10.0-15.17) zesty; urgency=low

  [ Tim Gardner ]

  * Release Tracking Bug
    - LP: #1675868

  * In ZZ-BML (POWER9):ubuntu17.04 installation Fails (LP: #1675771)
    - powerpc/64s: fix handling of non-synchronous machine checks
    - powerpc/64s: allow machine check handler to set severity and initiator
    - powerpc/64s: POWER9 machine check handler

  * [Feature] R3 mwait support for Knights Mill (LP: #1637550)
    - x86/cpufeature: Enable RING3MWAIT for Knights Landing
    - x86/cpufeature: Enable RING3MWAIT for Knights Mill
    - x86/msr: Add MSR_MISC_FEATURE_ENABLES and RING3MWAIT bit
    - x86/elf: Add HWCAP2 to expose ring 3 MONITOR/MWAIT
    - x86/cpufeature: Add RING3MWAIT to CPU features

  * [Feature] GLK:New device IDs (LP: #1645951)
    - mfd: intel-lpss: Add Intel Gemini Lake PCI IDs
    - pwm: lpss: Add Intel Gemini Lake PCI ID
    - i2c: i801: Add support for Intel Gemini Lake
    - spi: pxa2xx: Add support for Intel Gemini Lake
    - [Config] CONFIG_PINCTRL_GEMINILAKE=m
    - pinctrl: intel: Add Intel Gemini Lake pin controller support

  * Zesty update to v4.10.5 stable release (LP: #1675032)
    - net/mlx5e: Register/unregister vport representors on interface attach/detach
    - net/mlx5e: Do not reduce LRO WQE size when not using build_skb
    - net/mlx5e: Fix broken CQE compression initialization
    - net/mlx5e: Update MPWQE stride size when modifying CQE compress state
    - net/mlx5e: Fix wrong CQE decompression
    - vxlan: correctly validate VXLAN ID against VXLAN_N_VID
    - vti6: return GRE_KEY for vti6
    - vxlan: don't allow overwrite of config src addr
    - ipv4: add missing initialization for flowi4_uid
    - ipv4: mask tos for input route
    - sctp: set sin_port for addr param when checking duplicate address
    - net sched actions: decrement module reference count after table flush.
    - l2tp: avoid use-after-free caused by l2tp_ip_backlog_recv
    - vxlan: lock RCU on TX path
    - geneve: lock RCU on TX path
    - mlxsw: spectrum_router: Avoid potential packets loss
    - net: bridge: allow IPv6 when multicast flood is disabled
    - net: don't call strlen() on the user buffer in packet_bind_spkt()
    - net: net_enable_timestamp() can be called from irq contexts
    - ipv6: orphan skbs in reassembly unit
    - dccp: Unlock sock before calling sk_free()
    - amd-xgbe: Stop the PHY before releasing interrupts
    - amd-xgbe: Be sure to set MDIO modes on device (re)start
    - amd-xgbe: Don't overwrite SFP PHY mod_absent settings
    - bonding: use ETH_MAX_MTU as max mtu
    - strparser: destroy workqueue on module exit
    - tcp: fix various issues for sockets morphing to listen state
    - net: fix socket refcounting in skb_complete_wifi_ack()
    - net: fix socket refcounting in skb_complete_tx_timestamp()
    - net/sched: act_skbmod: remove unneeded rcu_read_unlock in tcf_skbmod_dump
    - dccp: fix use-after-free in dccp_feat_activate_values
    - team: use ETH_MAX_MTU as max mtu
    - vrf: Fix use-after-free in vrf_xmit
    - net/tunnel: set inner protocol in network gro hooks
    - uapi: fix linux/packet_diag.h use...

LPC: 0x31e8 |v4.12|a6450cb0388ee58659be5a54a7bfe5bff09532c7
SPI-NOR: 0x3196 enumerated from LPC device|v4.12| a6450cb0388ee58659be5a54a7bfe5bff09532c7

There is still one device is not pushed into upstream based on Intel Platform tracking system
UFS: 0x31ce | (?) | (?)

information from upstream:
UFS is not POR for GLK. Removed UFS from id list.

Now, this feature has all been in upstream.

Adding a 17.10 Artful nomination to this bug to cpature the commit noted in comment #5:

a6450cb0388ee58659be5a54a7bfe5bff09532c7 mfd: lpc_ich: Add support for Intel Gemini Lake SoC
v4.12-rc1~113^2~10

Will mark this In Progress for Artful as we work towards landing a 4.13 kernel for the release.

I summary all into description. At the same time, SPI-NOR is also added into upstream.
SPI-NOR: (0x3196) enumerated from LPC device | v4.12 |a6450cb0388ee58659be5a54a7bfe5bff09532c7 |

Moving this to Fix Committed for artful since we have a 4.12 kernel available in artful-proposed.

f80e78aa11ad754de20104233af1ce4cea8f16a5 mfd: intel-lpss: Add Intel Gemini Lake PCI IDs
v4.11-rc1~105^2~16

8f8983a5683623b62b339d159573f95a1fce44f3 usb: dwc3: pci: add Intel Gemini Lake PCI ID
v4.10-rc3~1^2~21^2~3

a6450cb0388ee58659be5a54a7bfe5bff09532c7 mfd: lpc_ich: Add support for Intel Gemini Lake SoC
v4.12-rc1~113^2~10

ae2520540cb0090eb8cdba559bcb6a82266f0308 pwm: lpss: Add Intel Gemini Lake PCI ID
v4.11-rc1~40^2^2~9

9827f9eb79c56424eac6409197a290601cf78eee i2c: i801: Add support for Intel Gemini Lake
v4.11-rc1~72^2~10

e18a80acd1365e91e3efcd69942d9073936cf851 spi: pxa2xx: Add support for Intel Gemini Lake
v4.11-rc1~153^2~7^2

6693f9f96a0936488dd7876b8079933786e27b1b pinctrl: intel: Add Intel Gemini Lake pin controller support
v4.11-rc1~133^2~17

2d1956d0a4e0fd586e1c72c642929e15b5f23226 mmc: sdhci-pci: Add support for Intel GLK
v4.10-rc1~127^2~59

340837f985c2cb87ca0868d4aa9ce42b0fab3a21 intel_th: pci: Add Gemini Lake support
v4.11-rc4~1^2~13^2